sampling defining characterising: Topics by WorldWideScience.org

Sample records for sampling defining characterising

Different Approach to the Aluminium Oxide Topography Characterisation

International Nuclear Information System (INIS)

Poljacek, Sanja Mahovic; Gojo, Miroslav; Raos, Pero; Stoic, Antun

2007-01-01

Different surface topographic techniques are being widely used for quantitative measurements of typical industrial aluminium oxide surfaces. In this research, specific surface of aluminium oxide layer on the offset printing plate has been investigated by using measuring methods which have previously not been used for characterisation of such surfaces. By using two contact instruments and non-contact laser profilometer (LPM) 2D and 3D roughness parameters have been defined. SEM micrographs of the samples were made. Results have shown that aluminium oxide surfaces with the same average roughness value (Ra) and mean roughness depth (Rz) typically used in the printing plate surface characterisation, have dramatically different surface topographies. According to the type of instrument specific roughness parameters should be used for defining the printing plate surfaces. New surface roughness parameters were defined in order to insure detailed characterisation of the printing plates in graphic reproduction process
The use of PIXE in the characterisation of thick obsidian samples

International Nuclear Information System (INIS)

Duerden, P.; Clayton, E.; Cohen, D.

1978-01-01

The proton induced x-ray emission technique has been used for the characterisation of obsidian samples from the S.W. Pacific region (Papua New Guinea, New Hebrides, New Zealand). It is intended to build up a reference library of data so that the origins of artefacts may be traced
A soil sampling reference site: The challenge in defining reference material for sampling

International Nuclear Information System (INIS)

De Zorzi, Paolo; Barbizzi, Sabrina; Belli, Maria; Fajgelj, Ales; Jacimovic, Radojko; Jeran, Zvonka; Sansone, Umberto; Perk, Marcel van der

2008-01-01

In the frame of the international SOILSAMP project, funded and coordinated by the Italian Environmental Protection Agency, an agricultural area was established as a reference site suitable for performing soil sampling inter-comparison exercises. The reference site was characterized for trace element content in soil, in terms of the spatial and temporal variability of their mass fraction. Considering that the behaviour of long-lived radionuclides in soil can be expected to be similar to that of some stable trace elements and that the distribution of these trace elements in soil can simulate the distribution of radionuclides, the reference site characterised in term of trace elements, can be also used to compare the soil sampling strategies developed for radionuclide investigations
A soil sampling reference site: The challenge in defining reference material for sampling

Energy Technology Data Exchange (ETDEWEB)

De Zorzi, Paolo [Agenzia per la Protezione dell' Ambiente e per i Servizi Tecnici (APAT), Servizio Metrologia Ambientale, Via di Castel Romano, Rome 100-00128 (Italy)], E-mail: paolo.dezorzi@apat.it; Barbizzi, Sabrina; Belli, Maria [Agenzia per la Protezione dell' Ambiente e per i Servizi Tecnici (APAT), Servizio Metrologia Ambientale, Via di Castel Romano, Rome 100-00128 (Italy); Fajgelj, Ales [International Atomic Energy Agency (IAEA), Agency' s Laboratories Seibersdorf, Vienna A-1400 (Austria); Jacimovic, Radojko; Jeran, Zvonka; Sansone, Umberto [Jozef Stefan Institute, Jamova 39, Ljubljana 1000 (Slovenia); Perk, Marcel van der [Department of Physical Geography, Utrecht University, P.O. Box 80115, TC Utrecht 3508 (Netherlands)

2008-11-15

In the frame of the international SOILSAMP project, funded and coordinated by the Italian Environmental Protection Agency, an agricultural area was established as a reference site suitable for performing soil sampling inter-comparison exercises. The reference site was characterized for trace element content in soil, in terms of the spatial and temporal variability of their mass fraction. Considering that the behaviour of long-lived radionuclides in soil can be expected to be similar to that of some stable trace elements and that the distribution of these trace elements in soil can simulate the distribution of radionuclides, the reference site characterised in term of trace elements, can be also used to compare the soil sampling strategies developed for radionuclide investigations.
A soil sampling reference site: the challenge in defining reference material for sampling.

Science.gov (United States)

de Zorzi, Paolo; Barbizzi, Sabrina; Belli, Maria; Fajgelj, Ales; Jacimovic, Radojko; Jeran, Zvonka; Sansone, Umberto; van der Perk, Marcel

2008-11-01

In the frame of the international SOILSAMP project, funded and coordinated by the Italian Environmental Protection Agency, an agricultural area was established as a reference site suitable for performing soil sampling inter-comparison exercises. The reference site was characterized for trace element content in soil, in terms of the spatial and temporal variability of their mass fraction. Considering that the behaviour of long-lived radionuclides in soil can be expected to be similar to that of some stable trace elements and that the distribution of these trace elements in soil can simulate the distribution of radionuclides, the reference site characterised in term of trace elements, can be also used to compare the soil sampling strategies developed for radionuclide investigations.
Characterisation of silica surfaces III: Characterisation of aerosil samples through ethanol adsorption and contact angle studies

Directory of Open Access Journals (Sweden)

M.S. Nadiye–Tabbiruka

2009-12-01

Full Text Available Aerosil samples, heat treated and then silylated with various silanes at various temperatures have been characterised by adsorption of ethanol at 293 K. Adsorption isotherms were plotted and the BET specific surface areas were determined. Contact angles were measured by the captive bubble method at the three phase contact line in ethanol, on glass slides similarly modified. Silylation was found to alter the ethanol adsorptive properties on aerosil and increase the contact angles on the glass slides to extents that depend on the silane used as well as the concentration of residual silanols and that of surface silyl groups.
Preparation and characterisation of glass surfaces for experimental purposes

International Nuclear Information System (INIS)

Serruys, Y.

1986-01-01

Experimental investigation of glasses, applied especially to the prevision of the behaviour of vitrified nuclear wastes, requires the preparation of well-defined and reproducibles surfaces, in order to separate the investigated phenomena from artifacts due to surface anomalies and to allow a valuable comparison between results obtained in different laboratories. The aim of the present report is to determine which characters, both physical and chemical, of glass surfaces, have to be controlled, because of their influence upon the investigated phenomena or the experimental processes employed in the investigation. A method is then presented for a surface preparation giving good guaranties of quality and reproducibility. The physical and chemical aspects of surface characterisation are successively considered. The relevant characters and their importance are described, then the corresponding techniques of characterisation are reviewed and it has been attempted to propose a set of techniques allowing a characterisation as complete as possible for laboratory purposes. A preparation method for experimental sample, aiming to satisfy all the previously defined criteria, is then proposed, and present results obtained with this method are described [fr
Defining Jazz Revisited - Taking a social constructionist approach to the characterisation of jazz

DEFF Research Database (Denmark)

Høyer, Ole Izard

2017-01-01

the concept of jazz from a social constructionist perspective and examines how constructions of a genre formation of jazz are characterised by ideas about the social. It is argued that ‘characterisations of jazz’ are central to such genre-definitions and are as tightly bound to social context......This article reconsiders the definition of jazz as a case study in relation to how a musical genre is constituted through narratives of culture and identity in musical culture. Rethinking the definition of jazz as a way of characterisation through a social constructionist approach, this article...
Characterisation of South African coals using instrumental neutron activation analysis

International Nuclear Information System (INIS)

Hart, R.J.

1985-01-01

This report includes the establishment of the major minor and trace element compositions of South African coals with the aim of characterising the different coal seams within a basin, defining regions of similar compositions and obtaining an overall view of the geochemistry of coals in this country. The results of 40 coal samples analysed by neutron activation analysis
Preparation and characterisation of magnetic nanostructured samples for inelastic neutron scattering experiments

Energy Technology Data Exchange (ETDEWEB)

Kreuzpaintner, Wolfgang

2010-06-22

Recent advances in thin-film structuring techniques have generated significant interest in the dynamics of spin waves in magnetic nanostructures and the possible use of inelastic neutron scattering (INS) for their investigation. This thesis describes the design and implementation, at GKSS Research Centre, of equipment for preparation of large and laterally submicron and nanometre structured magnetic samples for such future INS experiments. After a brief resume on spin waves in nanostructures, the development work on new purpose-designed equipment, including high vacuum (HV) argon ion beam milling and ultra high vacuum (UHV) e-beam evaporation setups, is described. Ni nanodot as well as Ni and novel Gd nanowire samples were prepared using combinations of sputter deposition, laser interference lithography, argon ion beam milling, e-beam evaporation and self organisation techniques. With reference to sample preparation, epitaxial growth studies for Ni on Si(100) substrate were performed, resulting in the development of a new deposition process, which by thermal tuning allows for the direct epitaxial growth of Ni on Si with unprecedented crystalline quality. The results of various characterisation experiments on the prepared nanostructured samples, including Scanning Electron Microscopy (SEM), microprobe analysis, Atomic and Magnetic Force Microscopy (AFM/MFM), Vibrating Sample Magnetometry (VSM), X-ray Diffraction (XRD) and Reflectivity (XRR), unpolarised and Polarised Neutron Scattering (PNR) and off-specular scattering by X-rays and neutrons using rocking scans and Time-Of-Flight Grazing Incidence Small Angle Neutron Scattering (TOF-GISANS), together with various analysis procedures such as Distorted-Wave Born Approximation (DWBA), are reported. The analysis of a Gd nanowire sample by TOF-GISANS led to a novel evaluation technique which in comparison with single wavelength methods allows portions of reciprocal space to be scanned without changing the angle of
Preparation and characterisation of magnetic nanostructured samples for inelastic neutron scattering experiments

International Nuclear Information System (INIS)

Kreuzpaintner, Wolfgang

2010-01-01

Recent advances in thin-film structuring techniques have generated significant interest in the dynamics of spin waves in magnetic nanostructures and the possible use of inelastic neutron scattering (INS) for their investigation. This thesis describes the design and implementation, at GKSS Research Centre, of equipment for preparation of large and laterally submicron and nanometre structured magnetic samples for such future INS experiments. After a brief resume on spin waves in nanostructures, the development work on new purpose-designed equipment, including high vacuum (HV) argon ion beam milling and ultra high vacuum (UHV) e-beam evaporation setups, is described. Ni nanodot as well as Ni and novel Gd nanowire samples were prepared using combinations of sputter deposition, laser interference lithography, argon ion beam milling, e-beam evaporation and self organisation techniques. With reference to sample preparation, epitaxial growth studies for Ni on Si(100) substrate were performed, resulting in the development of a new deposition process, which by thermal tuning allows for the direct epitaxial growth of Ni on Si with unprecedented crystalline quality. The results of various characterisation experiments on the prepared nanostructured samples, including Scanning Electron Microscopy (SEM), microprobe analysis, Atomic and Magnetic Force Microscopy (AFM/MFM), Vibrating Sample Magnetometry (VSM), X-ray Diffraction (XRD) and Reflectivity (XRR), unpolarised and Polarised Neutron Scattering (PNR) and off-specular scattering by X-rays and neutrons using rocking scans and Time-Of-Flight Grazing Incidence Small Angle Neutron Scattering (TOF-GISANS), together with various analysis procedures such as Distorted-Wave Born Approximation (DWBA), are reported. The analysis of a Gd nanowire sample by TOF-GISANS led to a novel evaluation technique which in comparison with single wavelength methods allows portions of reciprocal space to be scanned without changing the angle of
Characterisation of nuclear fuel samples by quadrupole and multi-collector inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Wernli, Beath; Guenther-Leopold, Ines; Kobler Waldis, Judith; Kopajtic, Zlatan

2003-01-01

The characterisation of nuclear fuel cycle materials for trace and minor metallic constituents is of great interest for the nuclear industry and safeguard officials. The main objective of various international programmes dealing with postirradiation examinations is to improve the knowledge of the inventories of actinides, fission and spallation products in spent nuclear fuels. The low detection limits for a large number of elements combined with the ability to analyse the isotopic composition of the elements have established inductively coupled plasma mass spectrometry (ICP-MS) as a powerful multi-element technique in diverse analytical applications for the characterisation of nuclear materials. Because numerous isobaric overlaps restrict the direct determination of many fission products by mass spectrometry, extensive chemical separations are required for these elements. In order to simplify this sample preparation procedure, a high performance liquid chromatography system (HPLC) was online coupled to the mass spectrometer. Since about 10 years a quadrupole based ICP-MS (Q-ICP-MS) combined with an HPLC is used within the Hot Laboratory of the Paul Scherrer Institut for different applications on nuclear fuel samples. Since May 2003 also a new multi-collector ICP-MS (MC-ICP-MS) is used for the mass spectrometric characterisation of nuclear fuel samples, especially for the precise determination of the isotopic vectors of fission products and actinides. Therefore, two complementary analytical systems are now available in the group of 'Isotope and Wet Analytical Chemistry'. A comparison of the analytical performance of both systems (with and without an online coupled HPLC system) for the determination of the isotopic composition and the elemental concentration of different nuclides in nuclear fuel samples, the advantages and limitations of both techniques, the accuracy and precision of the results and typical applications for both methods will be discussed in the
Characterisation

Science.gov (United States)

2007-03-01

Characterisation. In Nanotechnology Aerospace Applications – 2006 (pp. 4-1 – 4-8). Educational Notes RTO-EN-AVT-129bis, Paper 4. Neuilly-sur-Seine, France: RTO...the Commercialisation Processes Concept IDEA Proof-of- Principle Trial Samples Engineering Verification Samples Design Verification Samples...SEIC Systems Engineering for commercialisation Design Houses, Engineering & R&D USERS & Integrators SE S U R Integrators Fabs & Wafer Processing Die
Propolis volatiles characterisation from acaricide-treated and -untreated beehives maintained at Algarve (Portugal).

Science.gov (United States)

Miguel, Maria G; Nunes, Susana; Cruz, Cláudia; Duarte, João; Antunes, Maria D; Cavaco, Ana M; Mendes, Marta D; Lima, A Sofia; Pedro, Luis G; Barroso, José G; Figueiredo, A Cristina

2013-04-01

The variability of the volatile profile of 70 propolis samples from acaricide-treated and -untreated beehives maintained at Algarve (Portugal) was evaluated. Propolis samples were collected in three regions of Algarve at three different periods. Cluster analysis based on the propolis volatiles' chemical composition defined two main clusters, not related to the time of year, collection site, altitude, temperature or humidity ranges, and was based mainly on the relative amounts of viridiflorol, n-tricosane and n-nonadecane for cluster I. Cluster II was mainly characterised by the high thymol content, followed by viridiflorol, n-tricosane and n-nonadecane. The presence of higher thymol levels in propolis samples from cluster II may reflect the long use of an acaricide with thymol as main active ingredient. All samples showed an intense rock-rose aroma supported by the presence of characteristic Cistus and labdanum oil volatile components. Given the nowadays frequent propolis household use, volatiles thorough characterisation may assist in its quality assessment.
Preparation and characterisation of core-shell CNTs@MIPs nanocomposites and selective removal of estrone from water samples.

Science.gov (United States)

Gao, Ruixia; Su, Xiaoqian; He, Xiwen; Chen, Langxing; Zhang, Yukui

2011-01-15

This paper reports the preparation of carbon nanotubes (CNTs) functionalized with molecularly imprinted polymers (MIPs) for advanced removal of estrone. CNTs@Est-MIPs nanocomposites with a well-defined core-shell structure were obtained using a semi-covalent imprinting strategy, which employed a thermally reversible covalent bond at the surface of silica-coated CNTs for a large-scale production. The morphology and structure of the products were characterised by transmission electron microscopy and Fourier transform infrared spectroscopy. The adsorption properties were demonstrated by equilibrium rebinding experiments and Scatchard analysis. The results demonstrate that the imprinted nanocomposites possess favourable selectivity, high capacity and fast kinetics for template molecule uptake, yielding an adsorption capacity of 113.5 μmol/g. The synthetic process is quite simple, and the different batches of synthesized CNTs@Est-MIPs nanocomposites showed good reproducibility in template binding. The feasibility of removing estrogenic compounds from environmental water using the CNTs@Est-MIPs nanocomposites was demonstrated using water samples spiked with estrone. Copyright © 2010 Elsevier B.V. All rights reserved.
Hyphenated analytical techniques for materials characterisation

International Nuclear Information System (INIS)

Armstrong, Gordon; Kailas, Lekshmi

2017-01-01

This topical review will provide a survey of the current state of the art in ‘hyphenated’ techniques for characterisation of bulk materials, surface, and interfaces, whereby two or more analytical methods investigating different properties are applied simultaneously to the same sample to better characterise the sample than can be achieved by conducting separate analyses in series using different instruments. It is intended for final year undergraduates and recent graduates, who may have some background knowledge of standard analytical techniques, but are not familiar with ‘hyphenated’ techniques or hybrid instrumentation. The review will begin by defining ‘complementary’, ‘hybrid’ and ‘hyphenated’ techniques, as there is not a broad consensus among analytical scientists as to what each term means. The motivating factors driving increased development of hyphenated analytical methods will also be discussed. This introduction will conclude with a brief discussion of gas chromatography-mass spectroscopy and energy dispersive x-ray analysis in electron microscopy as two examples, in the context that combining complementary techniques for chemical analysis were among the earliest examples of hyphenated characterisation methods. The emphasis of the main review will be on techniques which are sufficiently well-established that the instrumentation is commercially available, to examine physical properties including physical, mechanical, electrical and thermal, in addition to variations in composition, rather than methods solely to identify and quantify chemical species. Therefore, the proposed topical review will address three broad categories of techniques that the reader may expect to encounter in a well-equipped materials characterisation laboratory: microscopy based techniques, scanning probe-based techniques, and thermal analysis based techniques. Examples drawn from recent literature, and a concluding case study, will be used to explain the
Hyphenated analytical techniques for materials characterisation

Science.gov (United States)

Armstrong, Gordon; Kailas, Lekshmi

2017-09-01

This topical review will provide a survey of the current state of the art in ‘hyphenated’ techniques for characterisation of bulk materials, surface, and interfaces, whereby two or more analytical methods investigating different properties are applied simultaneously to the same sample to better characterise the sample than can be achieved by conducting separate analyses in series using different instruments. It is intended for final year undergraduates and recent graduates, who may have some background knowledge of standard analytical techniques, but are not familiar with ‘hyphenated’ techniques or hybrid instrumentation. The review will begin by defining ‘complementary’, ‘hybrid’ and ‘hyphenated’ techniques, as there is not a broad consensus among analytical scientists as to what each term means. The motivating factors driving increased development of hyphenated analytical methods will also be discussed. This introduction will conclude with a brief discussion of gas chromatography-mass spectroscopy and energy dispersive x-ray analysis in electron microscopy as two examples, in the context that combining complementary techniques for chemical analysis were among the earliest examples of hyphenated characterisation methods. The emphasis of the main review will be on techniques which are sufficiently well-established that the instrumentation is commercially available, to examine physical properties including physical, mechanical, electrical and thermal, in addition to variations in composition, rather than methods solely to identify and quantify chemical species. Therefore, the proposed topical review will address three broad categories of techniques that the reader may expect to encounter in a well-equipped materials characterisation laboratory: microscopy based techniques, scanning probe-based techniques, and thermal analysis based techniques. Examples drawn from recent literature, and a concluding case study, will be used to explain the
Sampling and characterisation of groundwater colloids at ONKALO, Olkiluoto, Finland

International Nuclear Information System (INIS)

Takala, M.; Manninen, P.

2006-11-01

The purpose of this sampling campaign was to test different filtering methods and filter membranes, to determine the colloid concentration and to characterise the composition of the colloid phase at ONKALO groundwater station ONK-PVA1 at Olkiluoto. The sampling was done on 18 to 19 April 2006. The filtering methods tested were downhole in-situ filtration and in-line syringe filtration. The membranes tested were Anopore 0.2-μm membrane and Nuclepore 0.05 -μm membrane. The Anopore filter was designed to be 0.02 -μm, but according to the SEM micrograph the nominal pore size of the membranes was 0.2 -μm. The size distributions were determined by single particle analysis of the SEM micrographs taken from the used filter membranes. The size distribution can be expressed as a function of the Pareto power law (Buffle, 1988). Parameters A and b of the Pareto power law distribution were determined by using the least square sum method. The particle and mass concentrations were then calculated using the Pareto power law. The size distribution varied between the filtering methods, so that the syringe filtered samples indicated less aggregation than the downhole filtered samples. The colloid concentrations were higher in the Nuclepore filter membranes. This is probably due to the shorter settling time prior to the sampling or differences in the membrane pore size and material. The concentration of the colloid phase determined from the anopore membranes (0.05-1 -μm) was 0.2-0.4 mg/L. The water samples were analysed at the accredited laboratory of Consulting Engineers Paavo Ristola Ltd. The differences in the element concentrations were not detectable between the filtered and unfiltered samples. Contamination with, e.g., nickel, aluminium and organic carbon was evident. The valves, fittings and filter membranes probably caused the contamination. An EDS spectrum was taken from the downhole filtered Nuclepore membrane. The filter cake showed traces of aluminium, silicon and
Sensory analysis of characterising flavours

NARCIS (Netherlands)

Krüsemann, Erna J.Z.; Lasschuijt, Marlou P.; Graaf, de C.; Wijk, de René A.; Punter, Pieter H.; Tiel, van Loes; Cremers, Johannes W.J.M.; Nobelen, van de Suzanne; Boesveldt, Sanne; Talhout, Reinskje

2018-01-01

Objectives: Tobacco flavours are an important regulatory concept in several jurisdictions, for example in the USA, Canada and Europe. The European Tobacco Products Directive 2014/40/EU prohibits cigarettes and roll-your-own tobacco having a characterising flavour. This directive defines
A novel derivation of a within-batch sampling plan based on a Poisson-gamma model characterising low microbial counts in foods.

Science.gov (United States)

Gonzales-Barron, Ursula; Zwietering, Marcel H; Butler, Francis

2013-02-01

This study proposes a novel step-wise methodology for the derivation of a sampling plan by variables for food production systems characterised by relatively low concentrations of the inspected microorganism. After representing the universe of contaminated batches by modelling the between-batch and within-batch variability in microbial counts, a tolerance criterion defining batch acceptability (i.e., up to a tolerance percentage of the food units having microbial concentrations lower or equal to a critical concentration) is established to delineate a limiting quality contour that separates satisfactory from unsatisfactory batches. The problem consists then of finding the optimum decision criterion - arithmetic mean of the analytical results (microbiological limit, m(L)) and the sample size (n) - that satisfies a pre-defined level of confidence measured on the samples' mean distributions from all possible true within-batch distributions. This is approached by obtaining decision landscape curves representing collectively the conditional and joint producer's and consumer's risks at different microbiological limits along with confidence intervals representing uncertainty due to the propagated between-batch variability. Whilst the method requires a number of risk management decisions to be made such as the objective of the sampling plan (GMP-based or risk-based), the modality of derivation, the tolerance criterion or level of safety, and the statistical level of confidence, the proposed method can be used when past monitoring data are available so as to produce statistically-sound dynamic sampling plans with optimised efficiency and discriminatory power. For the illustration of Enterobacteriaceae concentrations on Irish sheep carcasses, a sampling regime of n=10 and m(L)=17.5CFU/cm(2) is recommended to ensure that the producer has at least a 90% confidence of accepting a satisfactory batch whilst the consumer at least a 97.5% confidence that a batch will not be

Criteria to define a more relevant reference sample of titanium dioxide in the context of food: a multiscale approach.

Science.gov (United States)

Dudefoi, William; Terrisse, Hélène; Richard-Plouet, Mireille; Gautron, Eric; Popa, Florin; Humbert, Bernard; Ropers, Marie-Hélène

2017-05-01

Titanium dioxide (TiO 2 ) is a transition metal oxide widely used as a white pigment in various applications, including food. Due to the classification of TiO 2 nanoparticles by the International Agency for Research on Cancer as potentially harmful for humans by inhalation, the presence of nanoparticles in food products needed to be confirmed by a set of independent studies. Seven samples of food-grade TiO 2 (E171) were extensively characterised for their size distribution, crystallinity and surface properties by the currently recommended methods. All investigated E171 samples contained a fraction of nanoparticles, however, below the threshold defining the labelling of nanomaterial. On the basis of these results and a statistical analysis, E171 food-grade TiO 2 totally differs from the reference material P25, confirming the few published data on this kind of particle. Therefore, the reference material P25 does not appear to be the most suitable model to study the fate of food-grade TiO 2 in the gastrointestinal tract. The criteria currently to obtain a representative food-grade sample of TiO 2 are the following: (1) crystalline-phase anatase, (2) a powder with an isoelectric point very close to 4.1, (3) a fraction of nanoparticles comprised between 15% and 45%, and (4) a low specific surface area around 10 m 2 g - 1 .
Discrete-Time Mixing Receiver Architecture for RF-Sampling Software-Defined Radio

NARCIS (Netherlands)

Ru, Z.; Klumperink, Eric A.M.; Nauta, Bram

2010-01-01

Abstract—A discrete-time (DT) mixing architecture for RF-sampling receivers is presented. This architecture makes RF sampling more suitable for software-defined radio (SDR) as it achieves wideband quadrature demodulation and wideband harmonic rejection. The paper consists of two parts. In the first
Characterisation of semiconductor materials for ionising radiation detectors

International Nuclear Information System (INIS)

Vaitkus, J.; Gaubas, E.; Jasinskaite, R.; Juska, G.; Kazukauskas, V.; Puras, R.; Rahman, M.; Sakalauskas, S.; Smith, K.

2002-01-01

Methods for the detection and characterisation of semiconductor material parameters and inhomogeneities are analysed. The peculiarities of different 'classical' material and structure characterisation methods are discussed. The methods of lifetime and surface recombination mapping and electric field distribution in the samples are presented. Some results of investigations of GaAs, Si and SiC are used for the characterisation of different peculiarities or methods
Defining clogging potential for permeable concrete.

Science.gov (United States)

Kia, Alalea; Wong, Hong S; Cheeseman, Christopher R

2018-08-15

Permeable concrete is used to reduce urban flooding as it allows water to flow through normally impermeable infrastructure. It is prone to clogging by particulate matter and predicting the long-term performance of permeable concrete is challenging as there is currently no reliable means of characterising clogging potential. This paper reports on the performance of a range of laboratory-prepared and commercial permeable concretes, close packed glass spheres and aggregate particles of varying size, exposed to different clogging methods to understand this phenomena. New methods were developed to study clogging and define clogging potential. The tests involved applying flowing water containing sand and/or clay in cycles, and measuring the change in permeability. Substantial permeability reductions were observed in all samples, particularly when exposed to sand and clay simultaneously. Three methods were used to define clogging potential based on measuring the initial permeability decay, half-life cycle and number of cycles to full clogging. We show for the first time strong linear correlations between these parameters for a wide range of samples, indicating their use for service-life prediction. Copyright © 2018 Elsevier Ltd. All rights reserved.
Optical characterisation of photonic wire and photonic crystal waveguides fabricated using nanoimprint lithography

DEFF Research Database (Denmark)

Borel, Peter Ingo; Frandsen, Lars Hagedorn; Lavrinenko, Andrei

2006-01-01

We have characterised photonic-crystal and photonic-wire waveguides fabricated by thermal nanoimprint lithography. The structures, with feature sizes down below 20 nm, are benchmarked against similar structures defined by direct electron beam lithography.......We have characterised photonic-crystal and photonic-wire waveguides fabricated by thermal nanoimprint lithography. The structures, with feature sizes down below 20 nm, are benchmarked against similar structures defined by direct electron beam lithography....
A Volume-Limited Sample of L and T Dwarfs Defined by Parallaxes

Science.gov (United States)

Best, William M. J.; Liu, Michael C.; Magnier, Eugene; Dupuy, Trent

2018-01-01

Volume-limited samples are the gold standard for stellar population studies, as they enable unbiased measurements of space densities and luminosity functions. Parallaxes are the most direct measures of distance and are therefore essential for defining high-confidence volume limited samples. Previous efforts to model the local brown dwarf population were hampered by samples based on a small number of parallaxes. We are using UKIRT/WFCAM to conduct the largest near-infrared program to date to measure parallaxes and proper motions of L and T dwarfs. For the past 3+ years we have monitored over 350 targets, ≈90% of which are too faint to be observed by Gaia. We present preliminary results from our observations. Our program more than doubles the number of known L and T dwarf parallaxes, defining a volume-limited sample of ≈400 L0-T6 dwarfs out to 25 parsecs, the first L and T dwarf sample of this size and depth based entirely on parallaxes. Our sample will combine with the upcoming stellar census from Gaia DR2 parallaxes to form a complete volume-limited sample of nearby stars and brown dwarfs.
Semantic Characterisations of Second-Order Computability over the Real Numbers

DEFF Research Database (Denmark)

Korovina, Margarita V.; Kudinov, Oleg V.

2001-01-01

We propose semantic characterisations of second-order computability over the reals based on σ-definability theory. Notions of computability for operators and real-valued functionals defined on the class of continuous functions are introduced via domain theory. We consider the reals with and without...
Wastes Characterisation from Foundry Activities on European Level

International Nuclear Information System (INIS)

Andres, I.; Ruiz, C.; Ibanez, R.; Viguri, J.; Irabien, A.

1999-01-01

This work presents The results of the eco toxicological characterisation of 22 defined wastes from steel foundry activities. The wastes have been selected from three processes, steel mill (smelting). sand casting and cleaning and finishing of steel products,with the common characteristics of represent an important industrial activity in the area and generated the wastes considered in this study. The eco toxicological characterisation obtained applying the Spanish regulations on hazardous waste is compared to the hazardous attributions considered by the European Union in order to characterise a waste as hazardous (non hazardous). The results allow to conclude that a acceptable concordance between both methodologies is reached and remark the need to split the broad generic types of wastes given by the Spanish regulation (Eco toxic / non eco toxic) into clearly identifiable specific types of waste
Combined micro-PIXE and NIR Raman spectroscopic plaque characterisation in a human atherosclerotic aorta sample

International Nuclear Information System (INIS)

Brands, P.J.M.; Poll, S.W.E. van de; Quaedackers, J.A.; Mutsaers, P.H.A.; Puppels, G.J.; Laarse, A. van der; Voigt, M.J.A. de

2001-01-01

Raman spectroscopy can be applied to characterise the chemical composition of an atherosclerotic plaque in vivo. In the near future this technique may become available for use in (coronary) arteries of living patients. For this moment, Raman spectroscopy is applied on artery samples in vitro, to study progression and regression of atherosclerotic plaque. Raman spectroscopy provides chemical information on a molecular basis. In this study, micro-particle induced X-ray emission (micro-PIXE) is applied to provide additional information on the elemental composition of the artery. Furthermore, the combined techniques allow for validation of the structures studied with Raman spectroscopy. This study proves that it is possible to combine and compare both techniques using the same region on the same sample if proper sample preparation is applied. Comparison shows that regions appearing in the Raman spectroscopy results can also be distinguished in micro-PIXE and backscattering spectroscopy (BS) distributions and vice versa. Combining both techniques makes it possible to separate phospholipids from triglycerides. Combined Raman spectroscopy and micro-PIXE/BS is recommended for studying progression and regression of atherosclerosis
Investigation of echo sounding parameters for the characterisation of bottom sediments in a sub-tropical reservoir

Directory of Open Access Journals (Sweden)

Stephan Hilgert

2016-07-01

Full Text Available The increasing number of reservoirs around the world today reaches a surface area of around 500,000 km², equaling one third of that of non-artificial surface water bodies. By impounding rivers through the construction of dams, riverine systems and biochemical cycles are disrupted. Different types of transported materials are trapped behind the dams and form layers of sediment. A method to characterise the spatially extensive sediment volumes with an EA 400 echo sounder was tested in the Vossoroca reservoir in the southeast of Brazil, Paraná State. A number of core and grab samples was taken and analysed for a variety of chemical and physical parameters. These data served as ground truthing for the hydro-acoustic assessment of the sediment. Eight hydro-acoustic parameters were derived from the echo signals using the Sonar5-Pro software. The major objective of defining the optimal survey parameters for the echo sounder as well as determining the difference between core and grab samples was reached by correlating the various single parameters and identifying the best combinations. Density and grain size distribution represented the best detectable sediment features with r-values of 0.94 and 0.95. The lower 38 kHz frequency generally had a better performance than the 200 kHz frequency. Results show that core samples reached a significantly higher quality of correlation for sediment characterisation. Additionally, it is was found that shorter pulse lengths yield a better characterisation. The results underline the potential of single beam echo sounders for extensive sediment characterisation. This methodology may be used for future mass balance estimations of large reservoirs.
Characterisation of Gliclazide-PEG 8000 Solid Dispersions

African Journals Online (AJOL)

Erah

Purpose: The aim of the present study was to characterise gliclazide solid dispersions (SDs) ... Results: The solubility of gliclazide increased with increasing amount of PEG 8000 in aqueous medium. ... FTIR analysis demonstrated the absence of well-defined gliclazide - PEG 8000 .... voltage of 35 kV and 20 mA current. The.
Radiological characterisation - Know your objective

International Nuclear Information System (INIS)

Lindow, Veronica; Moeller, Jennifer

2012-01-01

When developing a programme for mapping the radiological characteristics of a facility to be decommissioned it is important to take into account the objectives of the programme. Will the results be used to plan for radiological control and selection of appropriate decontamination and dismantling techniques? Will the radiological inventory be used for dimensioning of future waste repositories? These are two examples of the applications for such studies, which could require that a radiological characterisation programme be adapted to provide the data appropriate to the intended use. The level of detail and scope needed for a radiological characterisation will also vary depending on how the data will be used. An application to free-release a facility requires a comprehensive survey and well documented analysis in order to ensure that no radioactive contamination above prescribed levels is present. A bounding calculation to determine the maximum anticipated volumes and activity of radioactive waste requires a different approach. During the past few years, older decommissioning studies for the Swedish nuclear power plants have been updated (or are in the process of being updated). The decommissioning study's main purpose is to estimate the cost for decommissioning. The cost estimation is based on material and activity inventories, which in turn is based on previous and, in some cases, updated radiological characterisations of the facilities. The radiological inventory is an important part of the study as it affects the cost of decommissioning but also the uncertainties and accuracy of the cost estimation. The presentation will discuss the challenges in specifying a radiological characterisation programme with multiple objectives, together with insights on how data delivered can be applied to yield results suitable for the intended purpose, without introducing excessive conservatism. The intent of the presentation is to define issues that can be of use in various aspects
Radiological characterisation and decommissioning in Denmark

International Nuclear Information System (INIS)

Nellemenn, Thomas

2012-01-01

Danish Decommissioning (DD) is currently decommissioning the last Danish research reactor (DR3) and the Hot Cell facility. The DR3 project will soon finish dismantling of the external parts of the reactor (January 2012). The approval for dismantling of neutron activated and tritium contaminated heavy water pumps and tubing was granted in December 2011. DD will begin the work on the inner parts as the tendering process for equipment will start in 2012. Hereafter the dismantling of the top of the reactor will begin using the obtained remote controlled equipment. The Hot Cell facility consists of 6 contaminated cells. The first cell have been opened and cleaned. Currently the work progresses by removing parts and hot spots from the other cells with the use of robotic equipment. Challenges, lack of conventional and radiological documentation, dose rates and contamination higher than expected and the confined space in the cells have delayed the project. No final repository exists in Denmark. Therefore no official Waste Acceptance Criteria (WAC) have been formulated. However the Danish authority (SIS) does require a description of the waste in the interim storage facility (Inventory). Furthermore radiological characterisation of key nuclides is needed during decommissioning and dismantling. The information gained from the characterisation helps in the planning phase prior to the dismantling and for inventory calculations for later use. DD performs the radiological characterisation via both non-destructive and destructive analysis on samples. The samples are measured with gamma spectroscopy using mathematical and geometrical analysis. Scaling factors are used for neutron activated waste (DR3) to determine the difficult-to-measure isotopes and pure beta emitters. The primary scaling isotope is Co-60. Waste from the Hot Cell facility is alpha contaminated and scaling procedures for determination of alpha contamination are currently used in the planning process. Scaling of
OpenMSI Arrayed Analysis Toolkit: Analyzing Spatially Defined Samples Using Mass Spectrometry Imaging

Energy Technology Data Exchange (ETDEWEB)

de Raad, Markus [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); de Rond, Tristan [Univ. of California, Berkeley, CA (United States); Rübel, Oliver [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Keasling, Jay D. [Univ. of California, Berkeley, CA (United States); Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Technical Univ. of Denmark, Lyngby (Denmark); Northen, Trent R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States); Bowen, Benjamin P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States)

2017-05-03

Mass spectrometry imaging (MSI) has primarily been applied in localizing biomolecules within biological matrices. Although well-suited, the application of MSI for comparing thousands of spatially defined spotted samples has been limited. One reason for this is a lack of suitable and accessible data processing tools for the analysis of large arrayed MSI sample sets. In this paper, the OpenMSI Arrayed Analysis Toolkit (OMAAT) is a software package that addresses the challenges of analyzing spatially defined samples in MSI data sets. OMAAT is written in Python and is integrated with OpenMSI (http://openmsi.nersc.gov), a platform for storing, sharing, and analyzing MSI data. By using a web-based python notebook (Jupyter), OMAAT is accessible to anyone without programming experience yet allows experienced users to leverage all features. OMAAT was evaluated by analyzing an MSI data set of a high-throughput glycoside hydrolase activity screen comprising 384 samples arrayed onto a NIMS surface at a 450 μm spacing, decreasing analysis time >100-fold while maintaining robust spot-finding. The utility of OMAAT was demonstrated for screening metabolic activities of different sized soil particles, including hydrolysis of sugars, revealing a pattern of size dependent activities. Finally, these results introduce OMAAT as an effective toolkit for analyzing spatially defined samples in MSI. OMAAT runs on all major operating systems, and the source code can be obtained from the following GitHub repository: https://github.com/biorack/omaat.
Soil Radiological Characterisation Methodology

International Nuclear Information System (INIS)

Attiogbe, Julien; Aubonnet, Emilie; De Maquille, Laurence; De Moura, Patrick; Desnoyers, Yvon; Dubot, Didier; Feret, Bruno; Fichet, Pascal; Granier, Guy; Iooss, Bertrand; Nokhamzon, Jean-Guy; Ollivier Dehaye, Catherine; Pillette-Cousin, Lucien; Savary, Alain

2014-12-01

This report presents the general methodology and best practice approaches which combine proven existing techniques for sampling and characterisation to assess the contamination of soils prior to remediation. It is based on feedback of projects conducted by main French nuclear stakeholders involved in the field of remediation and dismantling (EDF, CEA, AREVA and IRSN). The application of this methodology will enable the project managers to obtain the elements necessary for the drawing up of files associated with remediation operations, as required by the regulatory authorities. It is applicable to each of the steps necessary for the piloting of remediation work-sites, depending on the objectives targeted (release into the public domain, re-use, etc.). The main part describes the applied statistical methodology with the exploratory analysis and variogram data, identification of singular points and their location. The results obtained permit assessment of a mapping to identify the contaminated surface and subsurface areas. It stakes the way for radiological site characterisation since the initial investigations from historical and functional analysis to check that the remediation objectives have been met. It follows an example application from the feedback of the remediation of a contaminated site on the Fontenay aux Roses facility. It is supplemented by a glossary of main terms used in the field from different publications or international standards. This technical report is a support of the ISO Standard ISO ISO/TC 85/SC 5 N 18557 'Sampling and characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes'. (authors) [fr
Characterisation of humic material for inter-laboratory comparison

International Nuclear Information System (INIS)

Peachy, D.; Bradley, A.D.; Davis, A.E.; Stuart, M.E.; Tait, B.A.R.; Vickers, B.P.; Williams, G.M.

1988-01-01

The characterisation and interlaboratory comparison of common humic materials by members of the European Commission's COCO group (set up to study complexes and colloids), forms part of a study of the effects of natural organic compounds in groundwater on the complexation and mobility of radionuclides. Three samples have been characterised: a sodium salt and a protonated form of the commercially available humic acid from Aldrich Chemicals; and a protonated humic acid from the Gorleben research site in Germany. Characterisation undertaken by BGS includes moisture content, elemental analysis, metal content, functional group analysis, infra-red spectroscopy, ultra-violet absorbance (E 4 /E 6 ratios), and ultra-filtration. (author)
Potential of Sr isotopic analysis in ceramic provenance studies: Characterisation of Chinese stonewares

Science.gov (United States)

Li, Bao-Ping; Zhao, Jian-Xin; Greig, Alan; Collerson, Kenneth D.; Zhuo, Zhen-Xi; Feng, Yue-Xin

2005-11-01

We compare the trace element and Sr isotopic compositions of stoneware bodies made in Yaozhou and Jizhou to characterise these Chinese archaeological ceramics and examine the potential of Sr isotopes in provenance studies. Element concentrations determined by ICP-MS achieve distinct characterisation for Jizhou samples due to their restricted variation, yet had limited success with Yaozhou wares because of their large variability. In contrast, 87Sr/86Sr ratios in Yaozhou samples have a very small variation and are all significantly lower than those of Jizhou samples, which show a large variation and cannot be well characterised with Sr isotopes. Geochemical interpretation reveals that 87Sr/86Sr ratios will have greater potential to characterise ceramics made of low Rb/Sr materials such as kaolin clay, yet will show larger variations in ceramics made of high Rb/Sr materials such as porcelain stone.
Potential of Sr isotopic analysis in ceramic provenance studies: Characterisation of Chinese stonewares

International Nuclear Information System (INIS)

Li Baoping; Zhao Jianxin; Greig, Alan; Collerson, Kenneth D.; Zhuo Zhenxi; Feng Yuexin

2005-01-01

We compare the trace element and Sr isotopic compositions of stoneware bodies made in Yaozhou and Jizhou to characterise these Chinese archaeological ceramics and examine the potential of Sr isotopes in provenance studies. Element concentrations determined by ICP-MS achieve distinct characterisation for Jizhou samples due to their restricted variation, yet had limited success with Yaozhou wares because of their large variability. In contrast, 87 Sr/ 86 Sr ratios in Yaozhou samples have a very small variation and are all significantly lower than those of Jizhou samples, which show a large variation and cannot be well characterised with Sr isotopes. Geochemical interpretation reveals that 87 Sr/ 86 Sr ratios will have greater potential to characterise ceramics made of low Rb/Sr materials such as kaolin clay, yet will show larger variations in ceramics made of high Rb/Sr materials such as porcelain stone
Soil radiological characterisation and remediation at CIEMAT

International Nuclear Information System (INIS)

Correa, Cristina; Garcia Tapias, Esther; Leganes, Jose

2012-01-01

Located in Madrid, CIEMAT is the Spanish Centre for Energy-Related, Environmental and Technological Research. It used to have more than 60 facilities in operation that allowed a wide range of activities in the nuclear field and in the application of ionising radiations. At present, the centre includes several facilities; some of them are now obsolete, shut down and in dismantling phases. In 2000 CIEMAT started the 'Integrated plan for the improvement of CIEMAT facilities (PIMIC)', which includes activities for the decontamination, dismantling, rehabilitation of obsolete installations and soil remediation activities. A small contaminated area named with the Spanish word 'Lenteja' (Lentil), has had to be remediate and restored. In the 70's, an incidental leakage of radioactive liquid occurred during a transference operation from the Reprocessing Plant to the Liquid Treatment Installation, and contaminated about 1000 m 3 of soil. Remediation activities in this area started with an exhaustive radiological characterisation of the soil, including surface samples and up to 16 meters boreholes, and the development of a comprehensive radiological characterization methodology for pre-classification of materials. Once the framework was defined the following tasks were being carried out: preparation of the area, soil extraction activities and final radiological characterisation for release purposes. Next step will be the refilling of the resulting hole from the removal soil activities. This paper will describe the soil radiological characterization and remediation activities at the Lentil Zone in Ciemat Research Centre. (authors)
Pervasive randomness in physics: an introduction to its modelling and spectral characterisation

Science.gov (United States)

Howard, Roy

2017-10-01

An introduction to the modelling and spectral characterisation of random phenomena is detailed at a level consistent with a first exposure to the subject at an undergraduate level. A signal framework for defining a random process is provided and this underpins an introduction to common random processes including the Poisson point process, the random walk, the random telegraph signal, shot noise, information signalling random processes, jittered pulse trains, birth-death random processes and Markov chains. An introduction to the spectral characterisation of signals and random processes, via either an energy spectral density or a power spectral density, is detailed. The important case of defining a white noise random process concludes the paper.

ONKALO. Underground characterisation and research programme (UCRP)

International Nuclear Information System (INIS)

2003-09-01

The purpose of the ONKALO Underground Characterisation and Research Programme (UCRP) is to explore Olkiluoto rock conditions and thereby enhance the current geoscientific understanding of the site, to allow the submission of an application for a construction licence for the deep repository. The characterisation programme has the following geoscientific goals: to develop and demonstrate techniques for detailed characterising volumes of rock from the underground, to update the current descriptive model of Olkiluoto bedrock and to increase confidence in this model such that it will serve the needs of construction and the Preliminary Safety Assessment Report (PSAR) in the construction licence application, and to identify volumes of rock that could be suitable for housing parts of the repository. The development of ONKALO will be based on coordinated investigation, design and construction activities. Mapping data from the tunnel front and data obtained from short probe holes will constitute most of the data needed to control the construction of ONKALO. Pilot holes will be drilled along the tunnel profile as the excavation proceeds and investigations will be carried out for geological, rock mechanics, hydrogeological and hydrogeochemical characterisation. Investigations cover more detailed mapping and sampling in parts of the tunnel, mapping and sampling of potential groundwater inflows to the tunnel and investigations from characterisation bore holes drilled from ONKALO. In addition, monitoring is planned in surface-drilled boreholes, in boreholes drilled from ONKALO, and in ONKALO itself. Monitoring will reveal changes in bedrock conditions and thus provide important information for site characterisation. The information collected by characterisation and monitoring will all be assessed in an integrated modelling effort. The aim of this modelling is both to successively enhance the description and understanding of the rock volume around ONKALO and to assess potential
Potential of Sr isotopic analysis in ceramic provenance studies: Characterisation of Chinese stonewares

Energy Technology Data Exchange (ETDEWEB)

Li Baoping [Advanced Centre for Queensland University Isotope Research Excellence (ACQUIRE), University of Queensland, Brisbane, Qld 4072 (Australia)]. E-mail: b.li@uq.edu.au; Zhao Jianxin [Advanced Centre for Queensland University Isotope Research Excellence (ACQUIRE), University of Queensland, Brisbane, Qld 4072 (Australia); Greig, Alan [Advanced Centre for Queensland University Isotope Research Excellence (ACQUIRE), University of Queensland, Brisbane, Qld 4072 (Australia); Collerson, Kenneth D. [Advanced Centre for Queensland University Isotope Research Excellence (ACQUIRE), University of Queensland, Brisbane, Qld 4072 (Australia); Zhuo Zhenxi [Shaanxi Provincial Institute of Archaeology, Xi' an 710054 (China); Feng Yuexin [Advanced Centre for Queensland University Isotope Research Excellence (ACQUIRE), University of Queensland, Brisbane, Qld 4072 (Australia)

2005-11-15

We compare the trace element and Sr isotopic compositions of stoneware bodies made in Yaozhou and Jizhou to characterise these Chinese archaeological ceramics and examine the potential of Sr isotopes in provenance studies. Element concentrations determined by ICP-MS achieve distinct characterisation for Jizhou samples due to their restricted variation, yet had limited success with Yaozhou wares because of their large variability. In contrast, {sup 87}Sr/{sup 86}Sr ratios in Yaozhou samples have a very small variation and are all significantly lower than those of Jizhou samples, which show a large variation and cannot be well characterised with Sr isotopes. Geochemical interpretation reveals that {sup 87}Sr/{sup 86}Sr ratios will have greater potential to characterise ceramics made of low Rb/Sr materials such as kaolin clay, yet will show larger variations in ceramics made of high Rb/Sr materials such as porcelain stone.
Dark Energy Survey Year 1 Results: Galaxy Sample for BAO Measurement

Energy Technology Data Exchange (ETDEWEB)

Crocce, M.; et al.

2017-12-17

We define and characterise a sample of 1.3 million galaxies extracted from the first year of Dark Energy Survey data, optimised to measure Baryon Acoustic Oscillations in the presence of significant redshift uncertainties. The sample is dominated by luminous red galaxies located at redshifts $z \\gtrsim 0.6$. We define the exact selection using color and magnitude cuts that balance the need of high number densities and small photometric redshift uncertainties, using the corresponding forecasted BAO distance error as a figure-of-merit in the process. The typical photo-$z$ uncertainty varies from $2.3\\%$ to $3.6\\%$ (in units of 1+$z$) from $z=0.6$ to $1$, with number densities from $200$ to $130$ galaxies per deg$^2$ in tomographic bins of width $\\Delta z = 0.1$. Next we summarise the validation of the photometric redshift estimation. We characterise and mitigate observational systematics including stellar contamination, and show that the clustering on large scales is robust in front of those contaminants. We show that the clustering signal in the auto-correlations and cross-correlations is generally consistent with theoretical models, which serves as an additional test of the redshift distributions.
Characterisation of contaminated metals using an advanced statistical toolbox - Geostatistical characterisation of contaminated metals: methodology and illustrations

International Nuclear Information System (INIS)

Larsson, Arne; Lidar, Per; Desnoyers, Yvon

2014-01-01

Radiological characterisation plays an important role in the process to recycle contaminated or potentially contaminated metals. It is a platform for planning, identification of the extent and nature of contamination, assessing potential risk impacts, cost estimation, radiation protection, management of material arising from decommissioning as well as for the release of the materials as well as the disposal of the generated secondary waste as radioactive waste. Key issues in radiological characterisation are identification of objectives, development of a measurement and sampling strategy (probabilistic, judgmental or a combination thereof), knowledge management, traceability, recording and processing of obtained information. By applying advanced combination of statistical and geostatistical in the concept better performance can be achieved at a lower cost. This paper will describe the benefits with the usage of the available methods in the different stages of the characterisation, treatment and clearance processes aiming for reliable results in line with the data quality objectives. (authors)
SiteChar. Characterisation of European CO2 storage. Deliverable D8.1. Qualitative and quantitative social site characterisations

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Pol, M.; Paukovic, M. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany); Shackley, S.; Mabon, L. [Scottish Carbon Capture and Storage SCCS, Edinburg, Scotland (United Kingdom); Hepplewhite, F.; Loveridge, R. [Energy Markets Unit, Scottish Government, Edinburg, Scotland (United Kingdom); Mazurowski, M.; Polak-Osiniak, D. [Polish Oil and Gas Company PGNiG, Warszawa (Poland); Rybicki, C. [AGH University of Science and Technology, Krakow (Poland)

2012-10-15

At local level, public support has proven crucial to the implementation of CO2 capture and storage (CCS) demonstration projects. Whereas no method exists to guarantee public acceptability of any project, a constructive stakeholder engagement process does increase the likelihood thereof. Social site characterisation can be used as an instrument to explore, plan and evaluate a process of active and constructive local stakeholder engagement in a prospective CCS project as a parallel activity to technical site characterisation. It roughly consists of a formative research phase to get acquainted with the area followed by a series of public information and engagement activities. This deliverable presents results from the first phase for the social site characterisations of a prospective CCS site in Poland (onshore) and the UK (offshore), using qualitative as well as quantitative research methods, as a first step to planning of local public engagement activities and evaluation of these activities that will be undertaken by this consortium at both sites in the near future. Although the term social site characterisation actually refers to the entire process of formative research and subsequent public outreach, and hence to the complete package of awareness work undertaken as part of SiteChar, in the present deliverable the term only refers to the formative research activities as undertaken up to now and as described in this deliverable. The qualitative part of the social site characterisation consisted of (1) a description of relevant social site characteristics such as local history; (2) interviews with relevant local stakeholders; (3) a media analysis of local newspapers. The quantitative part of the social site characterisation consisted of surveys using representative samples to characterise the local population in terms of awareness, knowledge and perceptions of CCS, felt involvement in decision making, extent of local activism, level of trust in representatives and
Improvement of colloid sampling techniques in groundwater and actinide characterisation of the groundwater systems at Gorleben (FRG) and El Berrocal (E)

International Nuclear Information System (INIS)

Dearlove, J.P.L.; Longworth, G.; Ivanovich, M.

1990-08-01

Two sites, the Gorleben site (FRG) and the El Berrocal Experimental station (E) have been studied to evaluate different sampling and analytical techniques for the characterisation of particulates (> 1000 nm size), colloids (1-1000 nm size) and the solution phase (<1 nm) in groundwaters in terms of their physical, chemical and actinide composition. The uptake characteristics of the field ultrafiltration system used to separate the colloid fraction from the solution phase in the groundwater have also been studied. (Author)
Sensory analysis of characterising flavours: evaluating tobacco product odours using an expert panel.

Science.gov (United States)

Krüsemann, Erna J Z; Lasschuijt, Marlou P; de Graaf, C; de Wijk, René A; Punter, Pieter H; van Tiel, Loes; Cremers, Johannes W J M; van de Nobelen, Suzanne; Boesveldt, Sanne; Talhout, Reinskje

2018-05-23

Tobacco flavours are an important regulatory concept in several jurisdictions, for example in the USA, Canada and Europe. The European Tobacco Products Directive 2014/40/EU prohibits cigarettes and roll-your-own tobacco having a characterising flavour. This directive defines characterising flavour as 'a clearly noticeable smell or taste other than one of tobacco […]'. To distinguish between products with and without a characterising flavour, we trained an expert panel to identify characterising flavours by smelling. An expert panel (n=18) evaluated the smell of 20 tobacco products using self-defined odour attributes, following Quantitative Descriptive Analysis. The panel was trained during 14 attribute training, consensus training and performance monitoring sessions. Products were assessed during six test sessions. Principal component analysis, hierarchical clustering (four and six clusters) and Hotelling's T-tests (95% and 99% CIs) were used to determine differences and similarities between tobacco products based on odour attributes. The final attribute list contained 13 odour descriptors. Panel performance was sufficient after 14 training sessions. Products marketed as unflavoured that formed a cluster were considered reference products. A four-cluster method distinguished cherry-flavoured, vanilla-flavoured and menthol-flavoured products from reference products. Six clusters subdivided reference products into tobacco leaves, roll-your-own and commercial products. An expert panel was successfully trained to assess characterising odours in cigarettes and roll-your-own tobacco. This method could be applied to other product types such as e-cigarettes. Regulatory decisions on the choice of reference products and significance level are needed which directly influences the products being assessed as having a characterising odour. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use
Synthesis and characterisation of doxorubicin-loaded functionalised ...

African Journals Online (AJOL)

The synthesised cobalt ferrite nanoparticles (CFNPs) were functionalised with xanthine gum (XG) and subsequently characterised by Fourier transform-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and contact angle studies. Vibrating sample magnetometry (VSM) was used for magnetic measurements of ...
Surface Acoustic Wave Nebulisation Mass Spectrometry for the Fast and Highly Sensitive Characterisation of Synthetic Dyes in Textile Samples

Science.gov (United States)

Astefanei, Alina; van Bommel, Maarten; Corthals, Garry L.

2017-10-01

Surface acoustic wave nebulisation (SAWN) mass spectrometry (MS) is a method to generate gaseous ions compatible with direct MS of minute samples at femtomole sensitivity. To perform SAWN, acoustic waves are propagated through a LiNbO3 sampling chip, and are conducted to the liquid sample, which ultimately leads to the generation of a fine mist containing droplets of nanometre to micrometre diameter. Through fission and evaporation, the droplets undergo a phase change from liquid to gaseous analyte ions in a non-destructive manner. We have developed SAWN technology for the characterisation of organic colourants in textiles. It generates electrospray-ionisation-like ions in a non-destructive manner during ionisation, as can be observed by the unmodified chemical structure. The sample size is decreased by tenfold to 1000-fold when compared with currently used liquid chromatography-MS methods, with equal or better sensitivity. This work underscores SAWN-MS as an ideal tool for molecular analysis of art objects as it is non-destructive, is rapid, involves minimally invasive sampling and is more sensitive than current MS-based methods. [Figure not available: see fulltext.
Best Practice on facility characterisation from a material and waste end-state perspective. Radiological characterisation in a waste and materials end-state perspective - International Characterisation Survey Aiming to Understand Good Practice

International Nuclear Information System (INIS)

Larsson, Arne; Weber, Inge; Emptage, Matthew; )

2016-01-01

Full text of publication follows: The Task Group on Radiological Characterisation and Decommissioning within the Nuclear Energy Agency (NEA) Working Party on Decommissioning was established to identify and present Best Practice in radiological characterisation at different stages of decommissioning as well as areas that could or should be developed further by international cooperation and coordination. The first phase of the project was focusing on general aspects of strategies for radiological characterisation in decommissioning of nuclear facilities. The second phase of the project focus on strategies for optimising radiological characterisation in a waste and materials end-state perspective, building on previous task group findings. One of the activities within the second phase has been to conduct a survey with the main objective to identify Best Practice. The survey was in the form of a questionnaire in two versions, one for regulators and one for owners/implementers. Sections of the questionnaire to gather views on Best Practice: - Initiation of a characterisation program; - Planning and preparation; - Implementation (i.e. conducting the characterisation measurements and samplings); - Data assessment phase (evaluation of the results); - Quality assurance. A section on the national legislation in the regulator version and a case study section in the owner version complement the questionnaire in order to get an overview of the regulatory frameworks and also practical experiences. The extensive questionnaire was distributed to a wide audience of recognised experts throughout the member states. 53 responses were received from in total 12 countries. Most responses were from Europe but also Asia and North America were represented. The preliminary conclusions are: - There is a solid experience in radiological characterisation among regulators as well as owners/implementers; - Responses demonstrates to large extent a common view of regulators and owners
Data analysis for radiological characterisation: Geostatistical and statistical complementarity

International Nuclear Information System (INIS)

Desnoyers, Yvon; Dubot, Didier

2012-01-01

Radiological characterisation may cover a large range of evaluation objectives during a decommissioning and dismantling (D and D) project: removal of doubt, delineation of contaminated materials, monitoring of the decontamination work and final survey. At each stage, collecting relevant data to be able to draw the conclusions needed is quite a big challenge. In particular two radiological characterisation stages require an advanced sampling process and data analysis, namely the initial categorization and optimisation of the materials to be removed and the final survey to demonstrate compliance with clearance levels. On the one hand the latter is widely used and well developed in national guides and norms, using random sampling designs and statistical data analysis. On the other hand a more complex evaluation methodology has to be implemented for the initial radiological characterisation, both for sampling design and for data analysis. The geostatistical framework is an efficient way to satisfy the radiological characterisation requirements providing a sound decision-making approach for the decommissioning and dismantling of nuclear premises. The relevance of the geostatistical methodology relies on the presence of a spatial continuity for radiological contamination. Thus geo-statistics provides reliable methods for activity estimation, uncertainty quantification and risk analysis, leading to a sound classification of radiological waste (surfaces and volumes). This way, the radiological characterization of contaminated premises can be divided into three steps. First, the most exhaustive facility analysis provides historical and qualitative information. Then, a systematic (exhaustive or not) surface survey of the contamination is implemented on a regular grid. Finally, in order to assess activity levels and contamination depths, destructive samples are collected at several locations within the premises (based on the surface survey results) and analysed. Combined with
Further training in the fields of radiological characterisation and clearance

International Nuclear Information System (INIS)

Bothe, M.; Feinhals, J.; Neukaeter, E.

2016-01-01

Radiological characterisation and clearance require specific knowledge and skills. Targeted further training of the staff is one possibility to get this knowledge and skills. A modular concept was established, which allows adaption to specific requests of the institution and state of knowledge and skills of participants. The modules have following focuses: ''radiological characterisation and clearance'', ''sampling'' and ''measurement and sampling plans'' and consist half-and-half of lectures and group works. In group works participants apply new knowledge to examples of the installation or simulated scenarios and afterwards they present and discuss the results. This concept was carried out for different institutions and is planned for some more.
Genetic characterisation of Taenia multiceps cysts from ruminants in Greece.

Science.gov (United States)

Al-Riyami, Shumoos; Ioannidou, Evi; Koehler, Anson V; Hussain, Muhammad H; Al-Rawahi, Abdulmajeed H; Giadinis, Nektarios D; Lafi, Shawkat Q; Papadopoulos, Elias; Jabbar, Abdul

2016-03-01

This study was designed to genetically characterise the larval stage (coenurus) of Taenia multiceps from ruminants in Greece, utilising DNA regions within the cytochrome c oxidase subunit 1 (partial cox1) and NADH dehydrogenase 1 (pnad1) mitochondrial (mt) genes, respectively. A molecular-phylogenetic approach was used to analyse the pcox1 and pnad1 amplicons derived from genomic DNA samples from individual cysts (n=105) from cattle (n=3), goats (n=5) and sheep (n=97). Results revealed five and six distinct electrophoretic profiles for pcox1 and pnad1, respectively, using single-strand conformation polymorphism. Direct sequencing of selected amplicons representing each of these profiles defined five haplotypes each for pcox1 and pnad1, among all 105 isolates. Phylogenetic analysis of individual sequence data for each locus, including a range of well-defined reference sequences, inferred that all isolates of T. multiceps cysts from ruminants in Greece clustered with previously published sequences from different continents. The present study provides a foundation for future large-scale studies on the epidemiology of T. multiceps in ruminants as well as dogs in Greece. Copyright © 2015 Elsevier B.V. All rights reserved.
Coupling laser desorption with gas chromatography and ion mobility spectrometry for improved olive oil characterisation.

Science.gov (United States)

Liedtke, Sascha; Seifert, Luzia; Ahlmann, Norman; Hariharan, Chandrasekhara; Franzke, Joachim; Vautz, Wolfgang

2018-07-30

The investigation of volatile compounds in the headspace of liquid samples can often be used for detailed and non-destructive characterisation of the sample. This has great potential for process control or the characterisation of food samples, such as olive oil. We investigated, for the first time, the plume of substances released from olive oil droplets by laser desorption in a feasibility study and applied ion mobility spectrometry coupled to rapid GC pre-separation to enhance selectivity. Our investigation demonstrated that significantly more substances can be detected and quantified via laser desorption than in the usual headspace, enabling a rapid (5-10 min), sensitive (low ng/g range) and comprehensive analysis of the sample, with the potential for quality control and fraud identification. Therefore, laser desorption provides a useful sampling tool for characterising liquids in many applications, requiring only a few µL of sample. Copyright © 2018 Elsevier Ltd. All rights reserved.
Semantic Characterisations of Second-Order Computability over the Real Numbers

DEFF Research Database (Denmark)

Korovina, Margarita V.; Kudinov, Oleg V.

2001-01-01

equality and prove theorems which connect computable operators and real-valued functionals with validity of finite σ-formulas. This research was supported in part by the RFBR (grants N 99-01-00485, N 00-01-00810) and by the Siberian Division of RAS (a grant for young researchers, 2000)......We propose semantic characterisations of second-order computability over the reals based on σ-definability theory. Notions of computability for operators and real-valued functionals defined on the class of continuous functions are introduced via domain theory. We consider the reals with and without...
Sampling scales define occupancy and underlying occupancy-abundance relationships in animals.

Science.gov (United States)

Steenweg, Robin; Hebblewhite, Mark; Whittington, Jesse; Lukacs, Paul; McKelvey, Kevin

2018-01-01

also clearly demonstrate that occupancy for mobile species without geographical closure is not true occupancy. The independence of occupancy estimates from spatial sampling grain depends on the sampling unit. Point-sampling surveys can, however, provide unbiased estimates of occupancy for multiple species simultaneously, irrespective of home-range size. The use of occupancy for trend monitoring needs to explicitly articulate how the chosen sampling scales define occupancy and affect the occupancy-abundance relationship. © 2017 by the Ecological Society of America.
OpenMSI Arrayed Analysis Toolkit: Analyzing Spatially Defined Samples Using Mass Spectrometry Imaging

DEFF Research Database (Denmark)

de Raad, Markus; de Rond, Tristan; Rübel, Oliver

2017-01-01

://openmsinersc.gov), a platform for storing, sharing, and analyzing MSI data. By using a web-based python notebook (Jupyter), OMAAT is accessible to anyone without programming experience yet allows experienced users to leverage all features. OMAAT was :evaluated by analyzing an MSI data set of a high-throughput glycoside...... processing tools for the analysis of large arrayed MSI sample sets. The OpenMSI Arrayed Analysis Toolkit (OMAAT) is a software package that addresses the challenges of analyzing spatially defined samples in MSI data sets. OMAAT is written in Python and is integrated with OpenMSI (http...
New characterisation method of electrical and electronic equipment wastes (WEEE)

Energy Technology Data Exchange (ETDEWEB)

Menad, N., E-mail: n.menad@brgm.fr [BRGM, 3 av. C. Guillemin, 45060 Orléans (France); Guignot, S. [BRGM, 3 av. C. Guillemin, 45060 Orléans (France); Houwelingen, J.A. van, E-mail: recy.cling@iae.nl [Recycling Consult, Eindhoven (Netherlands)

2013-03-15

Highlights: ► A novel method of characterisation of components contained in WEEE has been developed. ► This technique was applied on several samples generated from different recycling plants. ► Handheld NIR and XRF were used to determine types of plastics and flame retardants. ► WEEE processing flow-sheet was suggested. - Abstract: Innovative separation and beneficiation techniques of various materials encountered in electrical and electronic equipment wastes (WEEE) is a major improvement for its recycling. Mechanical separation-oriented characterisation of WEEE was conducted in an attempt to evaluate the amenability of mechanical separation processes. Properties such as liberation degree of fractions (plastics, metals ferrous and non-ferrous), which are essential for mechanical separation, are analysed by means of a grain counting approach. Two different samples from different recycling industries were characterised in this work. The first sample is a heterogeneous material containing different types of plastics, metals (ferrous and non-ferrous), printed circuit board (PCB), rubber and wood. The second sample contains a mixture of mainly plastics. It is found for the first sample that all aluminium particles are free (100%) in all investigated size fractions. Between 92% and 95% of plastics are present as free particles; however, 67% in average of ferromagnetic particles are liberated. It can be observed that only 42% of ferromagnetic particles are free in the size fraction larger than 20 mm. Particle shapes were also quantified manually particle by particle. The results show that the particle shapes as a result of shredding, turn out to be heterogeneous, thereby complicating mechanical separation processes. In addition, the separability of various materials was ascertained by a sink–float analysis and eddy current separation. The second sample was separated by automatic sensor sorting in four different products: ABS, PC–ABS, PS and rest product. The
New characterisation method of electrical and electronic equipment wastes (WEEE)

International Nuclear Information System (INIS)

Menad, N.; Guignot, S.; Houwelingen, J.A. van

2013-01-01

Highlights: ► A novel method of characterisation of components contained in WEEE has been developed. ► This technique was applied on several samples generated from different recycling plants. ► Handheld NIR and XRF were used to determine types of plastics and flame retardants. ► WEEE processing flow-sheet was suggested. - Abstract: Innovative separation and beneficiation techniques of various materials encountered in electrical and electronic equipment wastes (WEEE) is a major improvement for its recycling. Mechanical separation-oriented characterisation of WEEE was conducted in an attempt to evaluate the amenability of mechanical separation processes. Properties such as liberation degree of fractions (plastics, metals ferrous and non-ferrous), which are essential for mechanical separation, are analysed by means of a grain counting approach. Two different samples from different recycling industries were characterised in this work. The first sample is a heterogeneous material containing different types of plastics, metals (ferrous and non-ferrous), printed circuit board (PCB), rubber and wood. The second sample contains a mixture of mainly plastics. It is found for the first sample that all aluminium particles are free (100%) in all investigated size fractions. Between 92% and 95% of plastics are present as free particles; however, 67% in average of ferromagnetic particles are liberated. It can be observed that only 42% of ferromagnetic particles are free in the size fraction larger than 20 mm. Particle shapes were also quantified manually particle by particle. The results show that the particle shapes as a result of shredding, turn out to be heterogeneous, thereby complicating mechanical separation processes. In addition, the separability of various materials was ascertained by a sink–float analysis and eddy current separation. The second sample was separated by automatic sensor sorting in four different products: ABS, PC–ABS, PS and rest product. The
Stability of heparin blood samples during transport based on defined pre-analytical quality goals

DEFF Research Database (Denmark)

Jensen, Esther A; Stahl, Marta; Brandslund, Ivan

2008-01-01

BACKGROUND: In many countries and especially in Scandinavia, blood samples drawn in primary healthcare are sent to a hospital laboratory for analysis. The samples are exposed to various conditions regarding storage time, storage temperature and transport form. As these factors can have a severe...... impact on the quality of results, we wanted to study which combination of transport conditions could fulfil our pre-defined goals for maximum allowable error. METHODS: Samples from 406 patients from nine general practitioners (GPs) in two Danish counties were sent to two hospitals for analyses, during......, centrifuged and separated at the doctor's office within 45-60 min. This sample was considered as the best estimate of a comparison value. RESULTS: The pre-set quality goals were fulfilled for all the investigated components for samples transported to hospital by courier either as whole blood or as "on gel...

Analytical Characterisation of Nanoscale Zero-Valent Iron: A ...

Science.gov (United States)

Zero-valent iron nanoparticles (nZVI) have been widely tested as they are showing significant promise for environmental remediation. However, many recent studies have demonstrated that their mobility and reactivity in subsurface environments are significantly affected by their tendency to aggregate. Both the mobility and reactivity of nZVI mainly depends on properties such as particle size, surface chemistry and bulk composition. In order to ensure efficient remediation, it is crucial to accurately assess and understand the implications of these properties before deploying these materials into contaminated environments. Many analytical techniques are now available to determine these parameters and this paper provides a critical review of their usefulness and limitations for nZVI characterisation. These analytical techniques include microscopy and light scattering techniques for the determination of particle size, size distribution and aggregation state, and X-ray techniques for the characterisation of surface chemistry and bulk composition. Example characterisation data derived from commercial nZVI materials is used to further illustrate method strengths and limitations. Finally, some important challenges with respect to the characterisation of nZVI in groundwater samples are discussed. In recent years, manufactured nanoparticles (MNPs) have attracted increasing interest for their potential applications in the treatment of contaminated soil and water. In compar
Superficially located enlarged lymphoid follicles characterise nodular gastritis.

Science.gov (United States)

Okamura, Takuma; Sakai, Yasuhiro; Hoshino, Hitomi; Iwaya, Yugo; Tanaka, Eiji; Kobayashi, Motohiro

2015-01-01

Nodular gastritis is a form of chronic Helicobacter pylori gastritis affecting the gastric antrum and characterised endoscopically by the presence of small nodular lesions resembling gooseflesh. It is generally accepted that hyperplasia of lymphoid follicles histologically characterises nodular gastritis; however, quantitative analysis in support of this hypothesis has not been reported. Our goal was to determine whether nodular gastritis is characterised by lymphoid follicle hyperplasia.The number, size, and location of lymphoid follicles in nodular gastritis were determined and those properties compared to samples of atrophic gastritis. The percentages of high endothelial venule (HEV)-like vessels were also evaluated.The number of lymphoid follicles was comparable between nodular and atrophic gastritis; however, follicle size in nodular gastritis was significantly greater than that seen in atrophic gastritis. Moreover, lymphoid follicles in nodular gastritis were positioned more superficially than were those in atrophic gastritis. The percentage of MECA-79 HEV-like vessels was greater in areas with gooseflesh-like lesions in nodular versus atrophic gastritis.Superficially located hyperplastic lymphoid follicles characterise nodular gastritis, and these follicles correspond to gooseflesh-like nodular lesions observed endoscopically. These observations suggest that MECA-79 HEV-like vessels could play at least a partial role in the pathogenesis of nodular gastritis.
Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples

Energy Technology Data Exchange (ETDEWEB)

Shine, E. P.; Poirier, M. R.

2013-10-29

Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and
Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples

International Nuclear Information System (INIS)

Shine, E. P.; Poirier, M. R.

2013-01-01

Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and
ADM1-based methodology for the characterisation of the influent sludge in anaerobic reactors.

Science.gov (United States)

Huete, E; de Gracia, M; Ayesa, E; Garcia-Heras, J L

2006-01-01

This paper presents a systematic methodology to characterise the influent sludge in terms of the ADM1 components from the experimental measurements traditionally used in wastewater engineering. For this purpose, a complete characterisation of the model components in their elemental mass fractions and charge has been used, making a rigorous mass balance for all the process transformations and enabling the future connection with other unit-process models. It also makes possible the application of mathematical algorithms for the optimal characterisation of several components poorly defined in the ADM1 report. Additionally, decay and disintegration have been necessarily uncoupled so that the decay proceeds directly to hydrolysis instead of producing intermediate composites. The proposed methodology has been applied to the particular experimental work of a pilot-scale CSTR treating real sewage sludge, a mixture of primary and secondary sludge. The results obtained have shown a good characterisation of the influent reflected in good model predictions. However, its limitations for an appropriate prediction of alkalinity and carbon percentages in biogas suggest the convenience of including the elemental characterisation of the process in terms of carbon in the analytical program.
Characterisation of bulk solids

Energy Technology Data Exchange (ETDEWEB)

D. McGlinchey [Glasgow Caledonian University, Glasgow (United Kingdom). Centre for Industrial Bulk Solids Handling

2005-07-01

Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, including minerals processing. With contributions from leading authors in their respective fields, this book provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. Contents: Characterising particle properties; Powder mechanics and rheology; Characterisation for hopper and stockpile design; Fluidization behaviour; Characterisation for pneumatic conveyor design; Explosiblility; 'Designer' particle characteristics; Current industrial practice; and Future trends. 130 ills.
Field sampling for monitoring, migration and defining the areal extent of chemical contamination

International Nuclear Information System (INIS)

Thomas, J.M.; Skalski, J.R.; Eberhardt, L.L.; Simmons, M.A.

1984-01-01

As part of two studies funded by the U.S. Nuclear Regulatory Commission and the USEPA, the authors have investigated field sampling strategies and compositing as a means of detecting spills or migration at commercial low-level radioactive and chemical waste disposal sites and bioassays for detecting contamination at chemical waste sites. Compositing (pooling samples) for detection is discussed first, followed by the development of a statistical test to determine whether any component of a composite exceeds a prescribed maximum acceptable level. Subsequently, the authors explore the question of optimal field sampling designs and present the features of a microcomputer program designed to show the difficulties in constructing efficient field designs and using compositing schemes. Finally, they propose the use of bioassays as an adjunct or replacement for chemical analysis as a means of detecting and defining the areal extent of chemical migration
Acoustical characterisation of carbon nanotube-loaded polydimethylsiloxane used for optical ultrasound generation

OpenAIRE

Alles, E. J.; Heo, J.; Noimark, S.; Colchester, R.; Parkin, I.; Baac, H. W.; Desjardins, A.

2017-01-01

An optical ultrasound generator was used to perform broadband (2-35 MHz) acoustical characterisation measurements of a nanocomposite comprising carbon nanotubes (CNT) and polydimethylsiloxane (PDMS), a composite that is commonly used as optical ultrasound generator. Samples consisting of either pure PDMS or CNT-loaded PDMS were characterised to determine the influence of CNTs on the speed of sound and power-law acoustic attenuation parameters. A small weight fraction (
Characterisation of contaminaiton in Maralinga and Emu soils

International Nuclear Information System (INIS)

Williams, G.A.; Wilks, M.J.; Burns, P.A.; Cooper, M.B.

1990-01-01

A range of Maralinga and Emu soils have been characterised by means of sieving and microparticle classification, yielding mass and activity distribution of plutonium and americium with respect to size. The activity distribution is quite different from the mass distribution and much more variable from sample to sample. While the 241 Am activities >0.1 Bq, extends at least 100 km from the firing sites at Taranaki. 19 refs., 17 tabs., 4 figs
Current limitations and challenges in nanowaste detection, characterisation and monitoring

Energy Technology Data Exchange (ETDEWEB)

Part, Florian; Zecha, Gudrun [Department of Water-Atmosphere-Environment, University of Natural Resources and Life Sciences, Institute of Waste Management, Muthgasse 107, 1190 Vienna (Austria); Causon, Tim [Department of Chemistry, Division of Analytical Chemistry, University of Natural Resources and Life Sciences, Muthgasse 18, 1190 Vienna (Austria); Sinner, Eva-Kathrin [Department of Nanobiotechnology, Institute for Synthetic Bioarchitectures, University of Natural Resources and Life Sciences, Muthgasse 11/II, 1190 Vienna (Austria); Huber-Humer, Marion, E-mail: marion.huber-humer@boku.ac.at [Department of Water-Atmosphere-Environment, University of Natural Resources and Life Sciences, Institute of Waste Management, Muthgasse 107, 1190 Vienna (Austria)

2015-09-15

Highlights: • First review on detection of nanomaterials in complex waste samples. • Focus on nanoparticles in solid, liquid and gaseous waste samples. • Summary of current applicable methods for nanowaste detection and characterisation. • Limitations and challenges of characterisation of nanoparticles in waste. - Abstract: Engineered nanomaterials (ENMs) are already extensively used in diverse consumer products. Along the life cycle of a nano-enabled product, ENMs can be released and subsequently accumulate in the environment. Material flow models also indicate that a variety of ENMs may accumulate in waste streams. Therefore, a new type of waste, so-called nanowaste, is generated when end-of-life ENMs and nano-enabled products are disposed of. In terms of the precautionary principle, environmental monitoring of end-of-life ENMs is crucial to allow assessment of the potential impact of nanowaste on our ecosystem. Trace analysis and quantification of nanoparticulate species is very challenging because of the variety of ENM types that are used in products and low concentrations of nanowaste expected in complex environmental media. In the framework of this paper, challenges in nanowaste characterisation and appropriate analytical techniques which can be applied to nanowaste analysis are summarised. Recent case studies focussing on the characterisation of ENMs in waste streams are discussed. Most studies aim to investigate the fate of nanowaste during incineration, particularly considering aerosol measurements; whereas, detailed studies focusing on the potential release of nanowaste during waste recycling processes are currently not available. In terms of suitable analytical methods, separation techniques coupled to spectrometry-based methods are promising tools to detect nanowaste and determine particle size distribution in liquid waste samples. Standardised leaching protocols can be applied to generate soluble fractions stemming from solid wastes, while
Geophysical and hydrogeological characterisation of the impacts of on-site wastewater treatment discharge to groundwater in a poorly productive bedrock aquifer

Energy Technology Data Exchange (ETDEWEB)

Donohue, Shane [School of Planning, Architecture and Civil Engineering, Queen' s University Belfast, David Keir Building, Stranmillis Road, Belfast BT9 5AG, Northern Ireland (United Kingdom); McCarthy, Valerie; Rafferty, Patrick [Department of Applied Sciences, Dundalk Institute of Technology, Dublin Road, Dundalk (Ireland); Orr, Alison; Flynn, Raymond [School of Planning, Architecture and Civil Engineering, Queen' s University Belfast, David Keir Building, Stranmillis Road, Belfast BT9 5AG, Northern Ireland (United Kingdom)

2015-08-01

Contaminants discharging from on-site wastewater treatment systems (OSWTSs) can impact groundwater quality, threatening human health and surface water ecosystems. Risk of negative impacts becomes elevated in areas of extreme vulnerability with high water tables, where thin unsaturated intervals limit vadose zone attenuation. A combined geophysical/hydrogeological investigation into the effects of an OSWTS, located over a poorly productive aquifer (PPA) with thin subsoil cover, aimed to characterise effluent impacts on groundwater. Groundwater, sampled from piezometers down-gradient of the OSWTS percolation area displayed spatially erratic, yet temporally consistent, contaminant distributions. Electrical resistivity tomography identified an area of gross groundwater contamination close to the percolation area and, when combined with seismic refraction and water quality data, indicated that infiltrating effluent reaching the water table discharged to a deeper more permeable zone of weathered shale resting on more competent bedrock. Subsurface structure, defined by geophysics, indicated that elevated chemical and microbiological contaminant levels encountered in groundwater samples collected from piezometers, down-gradient of sampling points with lower contaminant levels, corresponded to those locations where piezometers were screened close to the weathered shale/competent rock interface; those immediately up-gradient were too shallow to intercept this interval, and thus the more impacted zone of the contaminant plume. Intermittent occurrence of faecal indicator bacteria more than 100 m down gradient of the percolation area suggested relatively short travel times. Study findings highlight the utility of geophysics as part of multidisciplinary investigations for OSWTS contaminant plume characterisation, while also demonstrating the capacity of effluent discharging to PPAs to impact groundwater quality at distance. Comparable geophysical responses observed in similar
Geophysical and hydrogeological characterisation of the impacts of on-site wastewater treatment discharge to groundwater in a poorly productive bedrock aquifer

International Nuclear Information System (INIS)

Donohue, Shane; McCarthy, Valerie; Rafferty, Patrick; Orr, Alison; Flynn, Raymond

2015-01-01

Contaminants discharging from on-site wastewater treatment systems (OSWTSs) can impact groundwater quality, threatening human health and surface water ecosystems. Risk of negative impacts becomes elevated in areas of extreme vulnerability with high water tables, where thin unsaturated intervals limit vadose zone attenuation. A combined geophysical/hydrogeological investigation into the effects of an OSWTS, located over a poorly productive aquifer (PPA) with thin subsoil cover, aimed to characterise effluent impacts on groundwater. Groundwater, sampled from piezometers down-gradient of the OSWTS percolation area displayed spatially erratic, yet temporally consistent, contaminant distributions. Electrical resistivity tomography identified an area of gross groundwater contamination close to the percolation area and, when combined with seismic refraction and water quality data, indicated that infiltrating effluent reaching the water table discharged to a deeper more permeable zone of weathered shale resting on more competent bedrock. Subsurface structure, defined by geophysics, indicated that elevated chemical and microbiological contaminant levels encountered in groundwater samples collected from piezometers, down-gradient of sampling points with lower contaminant levels, corresponded to those locations where piezometers were screened close to the weathered shale/competent rock interface; those immediately up-gradient were too shallow to intercept this interval, and thus the more impacted zone of the contaminant plume. Intermittent occurrence of faecal indicator bacteria more than 100 m down gradient of the percolation area suggested relatively short travel times. Study findings highlight the utility of geophysics as part of multidisciplinary investigations for OSWTS contaminant plume characterisation, while also demonstrating the capacity of effluent discharging to PPAs to impact groundwater quality at distance. Comparable geophysical responses observed in similar
Characterisation of a uranium fire aerosol

International Nuclear Information System (INIS)

Leuscher, A.H.

1976-01-01

Uranium swarf, which can burn spontaneously in air, creates an aerosol which is chemically toxic and radiotoxic. The uptake of uranium oxide in the respiratory system is determined to a large extent by the characteristics of the aerosol. A study has been made of the methods by which aerosols can be characterised. The different measured and defined characteristics of particles are given. The normal and lognormal particle size distributions are discussed. Shape factors interrelating characteristics are explained. Experimental techniques for the characterisation of an aerosol are discussed, as well as the instruments that have been used in this study; namely the Andersen impactor, point-to-plane electrostatic precipitator and the Pollak counter. Uranium swarf was made to burn with a heated filament, and the resulting aerosol was measured. Optical and electron microscopy have been used for the determination of the projected area diameters, and the aerodynamic diameters have been determined with the impactor. The uranium fire aerosol can be represented by a bimodal, or monomodal, lognormal particle size distribution depending on the way in which the swarf burns. The determined activity median aerodynamic diameter of the two peaks were 0,49μm and 6,0μm respectively [af
AREA EFFICIENT FRACTIONAL SAMPLE RATE CONVERSION ARCHITECTURE FOR SOFTWARE DEFINED RADIOS

Directory of Open Access Journals (Sweden)

Latha Sahukar

2014-09-01

Full Text Available The modern software defined radios (SDRs use complex signal processing algorithms to realize efficient wireless communication schemes. Several such algorithms require a specific symbol to sample ratio to be maintained. In this context the fractional rate converter (FRC becomes a crucial block in the receiver part of SDR. The paper presents an area optimized dynamic FRC block, for low power SDR applications. The limitations of conventional cascaded interpolator and decimator architecture for FRC are also presented. Extending the SINC function interpolation based architecture; towards high area optimization and providing run time configuration with time register are presented. The area and speed analysis are carried with Xilinx FPGA synthesis tools. Only 15% area occupancy with maximum clock speed of 133 MHz are reported on Spartan-6 Lx45 Field Programmable Gate Array (FPGA.
Materials characterisation

International Nuclear Information System (INIS)

Azali Muhammad

2005-01-01

Various nuclear techniques have been developed and employed by technologies and scientists worldwide to physically and chemically characterise the material particularly those that have applications in industry. These include small angle neutron scattering (SANS), x-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) for the internal structural study of material, whereas, the x-ray fluorescence (XRF) for the chemical analysis, while the Moessbauer spectroscopy for the study on the magnetic properties and structural identity of material. Basic principle and instrumentations of the techniques are discussed in this chapter. Example of their applications in various disciplines particularly in characterisation of industrial materials also described
The preparation and characterisation of reference fission foils

International Nuclear Information System (INIS)

Audenhove, J. van; Bievre, P. de; Pauwels, J.; Peetermans, F.; Gallet, M.; Verbruggen, A.

1979-01-01

Homogeneous and accurately defined uranium and plutonium reference fissionable deposits have been prepared by vacuum deposition of fluorides. The preparation of the fluorides as well as their vacuum deposition on planetary rotating multisubstrate holders are described. The characterisation of the deposits is obtained by relative α-counting and calibration using isotope dilution mass spectrometry. The mass per square centimeter of the deposits is corrected for the border effects and the homogeneity is determined by relative α-counting of small spots. The deposits show excellent adherence and resistance to different mediums. This makes their use as permanently available reference fission foils possible. (orig.)
Characterisation of the inorganic chemistry of surface waters in ...

African Journals Online (AJOL)

The main purpose of this study was to determine a simple inorganic chemistry index that can be used for all surface waters in South Africa, in order to characterise the inorganic chemistry of surface waters. Water quality data collected up until 1999 from all sample monitoring stations (2 068 monitoring stations, 364 659 ...
Culture-independent detection and characterisation of Mycobacterium tuberculosis and M. africanum in sputum samples using shotgun metagenomics on a benchtop sequencer

Directory of Open Access Journals (Sweden)

Emma L. Doughty

2014-09-01

Full Text Available Tuberculosis remains a major global health problem. Laboratory diagnostic methods that allow effective, early detection of cases are central to management of tuberculosis in the individual patient and in the community. Since the 1880s, laboratory diagnosis of tuberculosis has relied primarily on microscopy and culture. However, microscopy fails to provide species- or lineage-level identification and culture-based workflows for diagnosis of tuberculosis remain complex, expensive, slow, technically demanding and poorly able to handle mixed infections. We therefore explored the potential of shotgun metagenomics, sequencing of DNA from samples without culture or target-specific amplification or capture, to detect and characterise strains from the Mycobacterium tuberculosis complex in smear-positive sputum samples obtained from The Gambia in West Africa. Eight smear- and culture-positive sputum samples were investigated using a differential-lysis protocol followed by a kit-based DNA extraction method, with sequencing performed on a benchtop sequencing instrument, the Illumina MiSeq. The number of sequence reads in each sputum-derived metagenome ranged from 989,442 to 2,818,238. The proportion of reads in each metagenome mapping against the human genome ranged from 20% to 99%. We were able to detect sequences from the M. tuberculosis complex in all eight samples, with coverage of the H37Rv reference genome ranging from 0.002X to 0.7X. By analysing the distribution of large sequence polymorphisms (deletions and the locations of the insertion element IS6110 and single nucleotide polymorphisms (SNPs, we were able to assign seven of eight metagenome-derived genomes to a species and lineage within the M. tuberculosis complex. Two metagenome-derived mycobacterial genomes were assigned to M. africanum, a species largely confined to West Africa; the others that could be assigned belonged to lineages T, H or LAM within the clade of “modern” M. tuberculosis
Geochemical characterisation of Elbe river high flood sediments

Energy Technology Data Exchange (ETDEWEB)

Krueger, F. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Falkenberg (Germany). Sektion Boden-/Gewaesserforschung]|[UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Magdeburg (Germany). Sektion Gewaesserforschung; Rupp, H.; Meissner, R. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Falkenberg (Germany). Sektion Boden-/Gewaesserforschung; Lohse, M.; Buettner, O.; Friese, K. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Magdeburg (Germany). Sektion Gewaesserforschung; Miehlich, G. [Hamburg Univ. (Germany). Inst. fuer Bodenkunde

2001-07-01

Quality aims for land usage in flood plains have to be worked out in the Russian-German research project 'Effects of floods on the pollution of agricultural used flood plain soils of the Oka River and the Elbe River'. It is financed by the Germany Ministry of Education and Research (FKZ 02 WT 9617/0). Beside the characterisation of the present pollution of soils for the middle Elbe, it is necessary to prognosticate the current pollutant input. At the examination site nearby Wittenberge, Elbe River kilometers 435 and 440, natural deposited flood sediments were sampled by artificial lawn mats. By the geochemical characterisation it is possible to record the metal input into the flood plain and to win knowledge about the sedimentation process. The results of sediment investigation of the high flood in spring 1997 are presented. (orig.)
Thermoluminescence characterisation of chemical vapour deposited diamond films

CERN Document Server

Mazzocchi, S; Bucciolini, M; Cuttone, G; Pini, S; Sabini, M G; Sciortino, S

2002-01-01

The thermoluminescence (TL) characteristics of a set of six chemical vapour deposited diamond films have been studied with regard to their use as off-line dosimeters in radiotherapy. The structural characterisation has been performed by means of Raman spectroscopy. Their TL responses have been tested with radiotherapy beams ( sup 6 sup 0 Co photons, photons and electrons from a linear accelerator (Linac), 26 MeV protons from a TANDEM accelerator) in the dose range 0.1-7 Gy. The dosimetric characterisation has yielded a very good reproducibility, a very low dependence of the TL response on the type of particle and independence of the radiation energy. The TL signal is not influenced by the dose rate and exhibits a very low thermal fading. Moreover, the sensitivity of the diamond samples compares favourably with that of standard TLD100 dosimeters.

Chemical characterisation of zircon-cadmium sulfoselenide ceramic pigments

International Nuclear Information System (INIS)

Gazulla Barreda, M. F.; Rodrigo Edo, M.; Blasco Roca, E.; Orduna Cordero, M.

2013-01-01

The present paper addresses the development of a methodology that allows the complete chemical characterisation of zircon cadmium sulfoselenide ceramic pigments including minor and major elements. To develop the methodology, five zircon-cadmium sulfoselenide pigments with different hues were selected, studying the different measurement process steps, from sample preparation to the optimisation of the measurement of the different components of the pigments by spectroscopic techniques (WD-XRF and elemental analysis by combustion and IR detection). The chemical characterisation method developed was validated with synthetic standards prepared from the mixture of certified reference materials and pure oxides because no certified referenced materials of this type of pigments were commercially available. The developed method can be used for a complete chemical characterization of zircon-cadmium sulfoselenide ceramic pigments with a very low uncertainty for all the elements analysed. (Author)
Radiological Characterisation for Decommissioning of Nuclear Installations - Final Report of the Task Group on Radiological Characterisation and Decommissioning (RCD) of the Working Party on Decommissioning and Dismantling (WPDD) - Final Report, September 2013

International Nuclear Information System (INIS)

Andrieu, Caroline; Olivier Dehaye, Catherine; Tardy, Frederic; Boisserie, Thierry; Desnoyers, Yvon; Thierfeldt, Stefan; Martin, Nieves; Henrik Efraimsson; Haakansson, Lars; Larsson, Arne; Dunlop, Alister A.; Jarman, Sean; Orr, Peter; Abu-Eid, Boby

2013-01-01

, or during the dismantling phase where systems, structures, components and buildings have to be characterised for decisions regarding the extent of decontamination, application of appropriate dismantling techniques, identification, classification, treatment of radioactive materials, etc. The final status survey on the site has quite distinctive features as it also has to take into account the possibility of subsurface contamination, which may lead to radionuclide transfer into ground water and surface water bodies. Careful planning and implementation of radiological characterisation campaigns will allow significant reduction of time, costs and effort. On a strategic and managerial level, there are ways to maximise the efficiency of measurement techniques (e.g. by combining several types of measurement and sampling approaches) to increase efficiency of characterisation (e.g. by integrating characterisation into other tasks), or to choose an optimum form of organisation by allocating staff and resources timely and adequately to achieve the required characterisation results when needed, thus avoiding delays in the normal decommissioning work-flow or radioactive waste management. Today, experience gained from a large number of decommissioning projects helps to implement radiological characterisation effectively. Radiological characterisation is undoubtedly one of the key factors for any successful decommissioning project. The aim of this report is to identify and give an overview of the best practice for radiological characterisation at different stages of decommissioning and to point out areas that could or should be developed further through international co-operation and co-ordination. The report summarises various issues relating to radiological characterisation in a short and succinct way, giving an overview of the issues, the techniques, possible obstacles, strategic aspects and lessons learned. The reader interested in more in-depth or detailed information should
Characterisation of the biofouling community on a floating wave energy device.

Science.gov (United States)

Nall, Christopher R; Schläppy, Marie-Lise; Guerin, Andrew J

2017-05-01

Wave energy devices are novel structures in the marine environment and, as such, provide a unique habitat for biofouling organisms. In this study, destructive scrape samples and photoquadrats were used to characterise the temperate epibenthic community present on prototypes of the Pelamis wave energy converter. The biofouling observed was extensive and diverse with 115 taxa recorded including four non-native species. Vertical zonation was identified on the sides of the device, with an algae-dominated shallow subtidal area and a deeper area characterised by a high proportion of suspension-feeding invertebrates. Differences in species composition and biomass were also observed between devices, along the length of the device and between sampling dates. This research provides an insight into the variation of biofouling assemblages on a wave energy device as well as the potential technical and ecological implications associated with biofouling on marine renewable energy structures.
Feedback from performance assessment to site characterisation. The SITE-94 example

International Nuclear Information System (INIS)

Dverstorp, B.; Geier, J.

1999-01-01

Interaction and information exchange between site characterisation and performance assessment are key features of any successful radioactive waste management programme. Some examples are presented of the types of feedback that can be offered from performance assessment to site characterisation, based on SKI's most recent performance assessment project, SITE-94. SITE-94 in Sweden was an assessment of a hypothetical repository for spent nuclear fuel, based on real data gathered in the surface-based investigation of the Aespoe Hard Rock Laboratory site. Examples of feedback are given concerning quality control of data and site investigation procedures, identification of key parameters for the performance assessment, use of models for planning and evaluation of a site investigation, data sampling strategies, and guidance on future priorities for further development of site investigation methods. Because site characterisation serves multiple purposes, including provision of data for repository design and construction, it must account for and compromise among requirements from several lines of analyses in the performance assessment. (author)
CCS site characterisation criteria

Energy Technology Data Exchange (ETDEWEB)

Bachu, S.; Hawkes, C.; Lawton, D.; Pooladi-Darvish, M.; Perkins, E.

2009-12-15

IEA GHG recently commissioned the Alberta Research Counil in Canada to conduct a review of storage site selection criteria and site characterisation methods in order to produce a synthesis report. This report reviews the literature on the subject on the site seleciton and characterisation since the publication of the IPCC Special Report on CCS, and provides a synthesis and classification of criteria. 161 refs.
Characterisation of a SAGe well detector using GEANT4 and LabSOCS

Energy Technology Data Exchange (ETDEWEB)

Britton, R., E-mail: rich.britton@awe.co.uk [AWE, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom); University of Surrey, Guildford GU2 7XH (United Kingdom); Davies, A.V. [AWE, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom)

2015-06-21

This paper reports on the performance of a recently developed Small Anode Germanium (SAGe) well detector from Canberra Industries. This has been specifically designed to improve the energy resolution of the detector, such that it is comparable to the performance of broad-energy designs while achieving far higher efficiencies. Accurate efficiency characterisations and cascade summing correction factors are crucial for quantifying the radionuclides present in environmental samples, and these were calculated for the complex geometry posed by the well detector using two different methodologies. The first relied on Monte-Carlo simulations based upon the GEANT4 toolkit, and the second utilised Canberra Industries GENIE™ 2000 Gamma Analysis software in conjunction with a LabSOCS™ characterisation. Both were found to be in excellent agreement for all nuclides except for {sup 152}Eu, which presents a known issue in the Canberra software (all nuclides affected by this issue were well documented, and fixes are being developed). The correction factors were used to analyse two fully characterised reference samples, yielding results in good agreement with the accepted activity concentrations. Given the sensitivity of well type geometries to cascade summing, this represents a considerable achievement, and paves the way for the use of the SAGe well detector in analysis of ‘real-world’ environmental samples. With the efficiency increase when using the SAGe well in place of a BEGe, substantial reductions in the Minimum Detectable Activity (MDA) should be achievable for a range of nuclides.
Characterisation of a SAGe well detector using GEANT4 and LabSOCS

International Nuclear Information System (INIS)

Britton, R.; Davies, A.V.

2015-01-01

This paper reports on the performance of a recently developed Small Anode Germanium (SAGe) well detector from Canberra Industries. This has been specifically designed to improve the energy resolution of the detector, such that it is comparable to the performance of broad-energy designs while achieving far higher efficiencies. Accurate efficiency characterisations and cascade summing correction factors are crucial for quantifying the radionuclides present in environmental samples, and these were calculated for the complex geometry posed by the well detector using two different methodologies. The first relied on Monte-Carlo simulations based upon the GEANT4 toolkit, and the second utilised Canberra Industries GENIE™ 2000 Gamma Analysis software in conjunction with a LabSOCS™ characterisation. Both were found to be in excellent agreement for all nuclides except for 152 Eu, which presents a known issue in the Canberra software (all nuclides affected by this issue were well documented, and fixes are being developed). The correction factors were used to analyse two fully characterised reference samples, yielding results in good agreement with the accepted activity concentrations. Given the sensitivity of well type geometries to cascade summing, this represents a considerable achievement, and paves the way for the use of the SAGe well detector in analysis of ‘real-world’ environmental samples. With the efficiency increase when using the SAGe well in place of a BEGe, substantial reductions in the Minimum Detectable Activity (MDA) should be achievable for a range of nuclides
Spectroscopic Characterisation of CARMENES Target Candidates from FEROS, CAFE and HRS High-Resolution Spectra

Science.gov (United States)

Passegger, Vera Maria; Reiners, Ansgar; Jeffers, Sandra V.; Wende, Sebastian; Schöfer, Patrick; Amado, Pedro J.; Caballero, Jose A.; Montes, David; Mundt, Reinhard; Ribas, Ignasi; Quirrenbach, Andreas

2016-07-01

CARMENES (Calar Alto high-Resolution search for M dwarfs with Exoearths with Near-infrared and optical Échelle Spectrographs) started a new planet survey on M-dwarfs in January this year. The new high-resolution spectrographs are operating in the visible and near-infrared at Calar Alto Observatory. They will perform high-accuracy radial-velocity measurements (goal 1 m s-1) of about 300 M-dwarfs with the aim to detect low-mass planets within habitable zones. We characterised the candidate sample for CARMENES and provide fundamental parameters for these stars in order to constrain planetary properties and understand star-planet systems. Using state-of-the-art model atmospheres (PHOENIX-ACES) and χ2-minimization with a downhill-simplex method we determine effective temperature, surface gravity and metallicity [Fe/H] for high-resolution spectra of around 480 stars of spectral types M0.0-6.5V taken with FEROS, CAFE and HRS. We find good agreement between the models and our observed high-resolution spectra. We show the performance of the algorithm, as well as results, parameter and spectral type distributions for the CARMENES candidate sample, which is used to define the CARMENES target sample. We also present first preliminary results obtained from CARMENES spectra.
Characterising Complex Enzyme Reaction Data.

Directory of Open Access Journals (Sweden)

Handan Melike Dönertaş

Full Text Available The relationship between enzyme-catalysed reactions and the Enzyme Commission (EC number, the widely accepted classification scheme used to characterise enzyme activity, is complex and with the rapid increase in our knowledge of the reactions catalysed by enzymes needs revisiting. We present a manual and computational analysis to investigate this complexity and found that almost one-third of all known EC numbers are linked to more than one reaction in the secondary reaction databases (e.g., KEGG. Although this complexity is often resolved by defining generic, alternative and partial reactions, we have also found individual EC numbers with more than one reaction catalysing different types of bond changes. This analysis adds a new dimension to our understanding of enzyme function and might be useful for the accurate annotation of the function of enzymes and to study the changes in enzyme function during evolution.
Comprehensive characterisation of sewage sludge for thermochemical conversion processes - Based on Singapore survey.

Science.gov (United States)

Chan, Wei Ping; Wang, Jing-Yuan

2016-08-01

Recently, sludge attracted great interest as a potential feedstock in thermochemical conversion processes. However, compositions and thermal degradation behaviours of sludge were highly complex and distinctive compared to other traditional feedstock led to a need of fundamental research on sludge. Comprehensive characterisation of sludge specifically for thermochemical conversion was carried out for all existing Water Reclamation Plants in Singapore. In total, 14 sludge samples collected based on the type, plant, and batch categorisation. Existing characterisation methods for physical and chemical properties were analysed and reviewed using the collected samples. Qualitative similarities and quantitative variations of different sludge samples were identified and discussed. Oxidation of inorganic in sludge during ash forming analysis found to be causing significant deviations on proximate and ultimate analysis. Therefore, alternative parameters and comparison basis including Fixed Residues (FR), Inorganic Matters (IM) and Total Inorganics (TI) were proposed for better understanding on the thermochemical characteristics of sludge. Copyright © 2016 Elsevier Ltd. All rights reserved.
The use of historical data for the characterisation of multiple damaging hydrogeological events

Directory of Open Access Journals (Sweden)

O. Petrucci

2003-01-01

Full Text Available Landslides, floods and secondary floods (hereinafter called phenomena triggered by rainfall and causing extensive damage are reviewed in this paper. Damaging Hydrogeological Events (DHEs are defined as the occurrence of one or more simultaneous aforementioned phenomena. A method for the characterisation of DHEs based upon historic data is proposed. The method is aimed at assessing DHE-related hazard in terms of recurrence, severity, damage, and extent of the affected area. Using GIS, the DHEs historical and climatic data collection, the geomorphological and hydrogeological characterisation of the hit areas, the characterisation of induced damage, the evaluation of triggering rainfall return period and critical duration of each DHE were carried out. The approach was applied to a test site in Southern Italy (Calabria for validation purposes. A database was set up including data from 24 events which have occurred during an 80-year period. The spatial distribution of phenomena was analysed together with the return period of cumulative rainfall. The trend of the occurred phenomena was also compared with the climatic trend. Four main types of Damaging Hydrogeological Events were identified in the study area.
Characterisation: Challenges and Opportunities - A UK Perspective

International Nuclear Information System (INIS)

Emptage, Matthew; Loudon, David; Mcleod, Richard; Milburn, Helen

2016-01-01

Characterisation plays a very important role in the nuclear industry supporting: the development and implementation of decommissioning strategies/plans (and the optimisation of associated costs through reduction in technical risks); regulatory compliance demonstration; waste prevention/minimisation; evaluation and optimisation of worker radiation doses; and maintaining public confidence. Recognising these important drivers, the UK regulators are working with the UK Nuclear Decommissioning Authority (NDA) to undertake a review of characterisation practice in the UK nuclear (decommissioning) industry. The objective of the characterisation review is to understand the current characterisation challenges and to determine strategic and tactical opportunities (including sharing of standards and guidance, capabilities, learning from experience, good practice, research and development, training, quality assurance) to optimise characterisation practice. The work is being undertaken through review of nuclear operator's characterisation practice, with input from the NDA, the UK regulators, nuclear operators and representatives from the supply chain, and through consideration of good practice case studies. To support this, a catalogue of relevant national/international guidance documents is also be compiled. Finally a workshop with representatives from all parties has taken place to consider the findings and establish a common understanding of challenges and opportunities and to start to consider how they can be addressed. The review is establishing a collective (UK regulator's, NDA; nuclear operator's and supply chain) understanding of opportunities to improve characterisation practice in the UK. The characterisation review process is described and early results are presented and discussed. Subsequent work in 2016 will be required to prioritise the opportunities and to build a consensus to facilitate development and implementation of an improvement plan. The aim
Presence of Fusarium mycotoxins in feedstuffs and cow milk sampled from Croatian farms during 2015

Directory of Open Access Journals (Sweden)

Jelka Pleadin

2017-04-01

Full Text Available Mycotoxins may contaminate food of animal origin due to the carry-over effect and represent a potential risk to human health. The problem of Fusarium mycotoxin contamination becomes an issue especially during rainy years characterised by substantial temperature changes. The aim of this study was to investigate into the level of Fusarium mycotoxins zearalenone (ZEN, deoxynivalenol (DON and fumonisins (FUM in maize silage (n=21, concentrated dairy cattle feeds (n=56 and cow milk samples (n=105, taken during 2015 from households located in four Croatian regions. The presence of mycotoxins was determined using validated ELISA methods. A high level of feedstuffs’ contamination was evidenced, especially with ZEN, with values higher than recommended observed in 9.5 % of maize silage samples. Fourteen point three percent (14.3 % of milk samples were DON positive, with the toxin concentrations ranging from 5.4 to 67.3 μg/L. ZEN was determined in 94.3 % of milk samples, ranging from 0.3 to 88.6 μg/L. FUM were not detected in any of the analysed milk samples. Given the tolerable daily intakes (TDIs defined for these mycotoxins, human health risks arising from the consumption of cow milk can generally be considered low, even in times characterised by weather conditions that facilitate the production of Fusarium mycotoxins in cereals subsequently used as dairy cattle feed. The exception represents particular milk samples in which high ZEN concentrations were found.
Methods for Characterisation of unknown Suspect Radioactive Samples

International Nuclear Information System (INIS)

Sahagia, M.; Grigorescu, E.L.; Luca, A.; Razdolescu, A.C.; Ivan, C.

2001-01-01

Full text: The paper presents various identification and measurement methods, used for the expertise of a wide variety of suspect radioactive materials, whose circulation was not legally stated. The main types of examined samples were: radioactive sources, illegally trafficked; suspect radioactive materials or radioactively contaminated devices; uranium tablets; fire detectors containing 241 Am sources; osmium samples containing radioactive 185 Os or enriched 187 Os. The types of analyses and determination methods were as follows: the chemical composition was determined by using identification reagents or by neutron activation analysis; the radionuclide composition was determined by using gamma-ray spectrometry; the activity and particle emission rates were determined by using calibrated radiometric equipment; the absorbed dose rate at the wall of all types of containers and samples was determined by using calibrated dose ratemeters. The radiation exposure risk for population, due to these radioactive materials, was evaluated for every case. (author)
Mechanical characterisation of agarose-based chromatography resins for biopharmaceutical manufacture.

Science.gov (United States)

Nweke, Mauryn C; McCartney, R Graham; Bracewell, Daniel G

2017-12-29

Mechanical characterisation of agarose-based resins is an important factor in ensuring robust chromatographic performance in the manufacture of biopharmaceuticals. Pressure-flow profiles are most commonly used to characterise these properties. There are a number of drawbacks with this method, including the potential need for several re-packs to achieve the desired packing quality, the impact of wall effects on experimental set up and the quantities of chromatography media and buffers required. To address these issues, we have developed a dynamic mechanical analysis (DMA) technique that characterises the mechanical properties of resins based on the viscoelasticity of a 1ml sample of slurry. This technique was conducted on seven resins with varying degrees of mechanical robustness and the results were compared to pressure-flow test results on the same resins. Results show a strong correlation between the two techniques. The most mechanically robust resin (Capto Q) had a critical velocity 3.3 times higher than the weakest (Sepharose CL-4B), whilst the DMA technique showed Capto Q to have a slurry deformation rate 8.3 times lower than Sepharose CL-4B. To ascertain whether polymer structure is indicative of mechanical strength, scanning electron microscopy images were also used to study the structural properties of each resin. Results indicate that DMA can be used as a small volume, complementary technique for the mechanical characterisation of chromatography media. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.
Tablet surface characterisation by various imaging techniques

DEFF Research Database (Denmark)

Seitavuopio, Paulus; Rantanen, Jukka; Yliruusi, Jouko

2003-01-01

The aim of this study was to characterise tablet surfaces using different imaging and roughness analytical techniques including optical microscopy, scanning electron microscopy (SEM), laser profilometry and atomic force microscopy (AFM). The test materials compressed were potassium chloride (KCl......) and sodium chloride (NaCl). It was found that all methods used suggested that the KCl tablets were smoother than the NaCl tablets and higher compression pressure made the tablets smoother. Imaging methods like optical microscopy and SEM can give useful information about the roughness of the sample surface...
Molecular characterisation of Colombian yam germplasm by "DNA amplification fingerprinting (DAF" in radioactivo conditions

Directory of Open Access Journals (Sweden)

Silvia L. Bustamante

2003-07-01

Full Text Available Samples from the Universidad de Córdoba's yam collection (Dioscorea spp. and others originating from IITA (International Institute of Tropical Agriculture, Ibadan, Nigeria were molecularly characterised to complement existing information about them. The yam (Diosocorea spp. represents a basic crop for small-scale farmers on the Colombian Atlantic Coast who sow around 20,000 hectares per year. Even though they are dioecious species, only one sex is represented in Colombia; it must also be stated that climatic conditions are not propitious for its flowering. This situation has caused difficulty for work in yam breeding. The yam species and varieties used in the Colombian ABP (Agricultural Biotechnology Programme have been molecularly characterised by AFLPs in a previous publication describing a preliminary study emerging from the need to broaden the characterisation of those accessions kept at the Universidad de Córdoba. Comparisons have also been done with some African accessions donated by IITA. In this article, samples were molecularly characterised by another fingerprinting technique, the DAF technique (DNA Amplification Fingerprinting based on PCR, using random oligonucleotides for generating characteristic band patterns from each individual. The results showed 0.0413 population diversity with 0.9587 average similarity, indicating that the yam collection studied had very little genetic diversity and, probably, this could be why the crop is vulnerable to plagues and diseases, as happened at the end of the 1980s when anthracnose practically devastated the crop on the Colombian Atlantic coast. Similarity was also found between those Colombian and African samples analysed, agreeing with low diversity and less distance between common ancestors. The molecular results suggest the need for using other molecular techniques having a greater power of discrimination and also the need to broaden the genetic diversity in yam crops for providing greater
Characterising encapsulated nuclear waste using cosmic-ray muon tomography

International Nuclear Information System (INIS)

Clarkson, A.; Hamilton, D.J.; Hoek, M.; Ireland, D.G.; Kaiser, R.; Keri, T.; Lumsden, S.; Mahon, D.F.; McKinnon, B.; Murray, M.; Nutbeam-Tuffs, S.; Yang, G.; Johnstone, J.R.; Shearer, C.; Zimmerman, C.

2015-01-01

Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons have been shown previously to successfully identify and characterise low- and high-Z materials within an air matrix using a prototype scintillating-fibre tracker system. Those studies were performed as the first in a series to assess the feasibility of this technology and image reconstruction techniques in characterising the potential high-Z contents of legacy nuclear waste containers for the U.K. Nuclear Industry. The present work continues the feasibility study and presents the first images reconstructed from experimental data collected using this small-scale prototype system of low- and high-Z materials encapsulated within a concrete-filled stainless-steel container. Clear discrimination is observed between the thick steel casing, the concrete matrix and the sample materials assayed. These reconstructed objects are presented and discussed in detail alongside the implications for future industrial scenarios
Characterising encapsulated nuclear waste using cosmic-ray muon tomography

Science.gov (United States)

Clarkson, A.; Hamilton, D. J.; Hoek, M.; Ireland, D. G.; Johnstone, J. R.; Kaiser, R.; Keri, T.; Lumsden, S.; Mahon, D. F.; McKinnon, B.; Murray, M.; Nutbeam-Tuffs, S.; Shearer, C.; Yang, G.; Zimmerman, C.

2015-03-01

Tomographic imaging techniques using the Coulomb scattering of cosmic-ray muons have been shown previously to successfully identify and characterise low- and high-Z materials within an air matrix using a prototype scintillating-fibre tracker system. Those studies were performed as the first in a series to assess the feasibility of this technology and image reconstruction techniques in characterising the potential high-Z contents of legacy nuclear waste containers for the U.K. Nuclear Industry. The present work continues the feasibility study and presents the first images reconstructed from experimental data collected using this small-scale prototype system of low- and high-Z materials encapsulated within a concrete-filled stainless-steel container. Clear discrimination is observed between the thick steel casing, the concrete matrix and the sample materials assayed. These reconstructed objects are presented and discussed in detail alongside the implications for future industrial scenarios.
Geochemical Parameters Required from the SKB Site Characterisation Programme

International Nuclear Information System (INIS)

Bath, Adrian

2002-01-01

SKB has described its approach to site characterisation in a number of Technical Reports. One of the scientific topics in which specific information requirements and priorities are set out is geochemistry. This report for SKI examines critically whether the geochemical parameters identified in the SKB programme documents will be adequate for safety and regulatory requirements. It also examines some of the details of parameter requirements and interpretation tools that will be necessary to convert site investigation data into knowledge about chemical conditions and groundwater movements. The SKB strategy for geochemical data focuses on a small number of 'suitability indicators', primarily dissolved oxygen, pH and salinity. Their parameter requirements aim to assess those primary characteristics, as well as to acquire a wider range of data that will support those assessments and provide a broader understanding of candidate areas. An initial observation in this review that, though it is a primary suitability indicator, dissolved oxygen apparently will not be measured and instead will be inferred from other redox indicators. This raises a number of issues about sampling and monitoring measures, analytical data reliability and sensitivity, and the degree of confidence in geochemical understanding. A geochemical programme involves reconnaissance by desk study and acquisition of new data at levels of details that are appropriate to the stage of site investigations. As early as possible, a conceptual model of a candidate area should help to define the objectives of geochemical measurements on both rock and groundwater samples. It is recommended that parameters requirements should be defined and considered not only in terms of isolated measurements but more in terms of addressing broader objectives that relate to safety and also to geoscientific understanding. The safety priorities remain (e.g. dissolved oxygen) but will then be supported by an understanding of processes

Geochemical Parameters Required from the SKB Site Characterisation Programme

Energy Technology Data Exchange (ETDEWEB)

Bath, Adrian [Intellisci Ltd., Loughborough (United Kingdom)

2002-01-01

SKB has described its approach to site characterisation in a number of Technical Reports. One of the scientific topics in which specific information requirements and priorities are set out is geochemistry. This report for SKI examines critically whether the geochemical parameters identified in the SKB programme documents will be adequate for safety and regulatory requirements. It also examines some of the details of parameter requirements and interpretation tools that will be necessary to convert site investigation data into knowledge about chemical conditions and groundwater movements. The SKB strategy for geochemical data focuses on a small number of 'suitability indicators', primarily dissolved oxygen, pH and salinity. Their parameter requirements aim to assess those primary characteristics, as well as to acquire a wider range of data that will support those assessments and provide a broader understanding of candidate areas. An initial observation in this review that, though it is a primary suitability indicator, dissolved oxygen apparently will not be measured and instead will be inferred from other redox indicators. This raises a number of issues about sampling and monitoring measures, analytical data reliability and sensitivity, and the degree of confidence in geochemical understanding. A geochemical programme involves reconnaissance by desk study and acquisition of new data at levels of details that are appropriate to the stage of site investigations. As early as possible, a conceptual model of a candidate area should help to define the objectives of geochemical measurements on both rock and groundwater samples. It is recommended that parameters requirements should be defined and considered not only in terms of isolated measurements but more in terms of addressing broader objectives that relate to safety and also to geoscientific understanding. The safety priorities remain (e.g. dissolved oxygen) but will then be supported by an understanding of
On cyclic yield strength in definition of limits for characterisation of fatigue and creep behaviour

Science.gov (United States)

Gorash, Yevgen; MacKenzie, Donald

2017-06-01

This study proposes cyclic yield strength as a potential characteristic of safe design for structures operating under fatigue and creep conditions. Cyclic yield strength is defined on a cyclic stress-strain curve, while monotonic yield strength is defined on a monotonic curve. Both values of strengths are identified using a two-step procedure of the experimental stress-strain curves fitting with application of Ramberg-Osgood and Chaboche material models. A typical S-N curve in stress-life approach for fatigue analysis has a distinctive minimum stress lower bound, the fatigue endurance limit. Comparison of cyclic strength and fatigue limit reveals that they are approximately equal. Thus, safe fatigue design is guaranteed in the purely elastic domain defined by the cyclic yielding. A typical long-term strength curve in time-to-failure approach for creep analysis has two inflections corresponding to the cyclic and monotonic strengths. These inflections separate three domains on the long-term strength curve, which are characterised by different creep fracture modes and creep deformation mechanisms. Therefore, safe creep design is guaranteed in the linear creep domain with brittle failure mode defined by the cyclic yielding. These assumptions are confirmed using three structural steels for normal and high-temperature applications. The advantage of using cyclic yield strength for characterisation of fatigue and creep strength is a relatively quick experimental identification. The total duration of cyclic tests for a cyclic stress-strain curve identification is much less than the typical durations of fatigue and creep rupture tests at the stress levels around the cyclic yield strength.
An extended characterisation theorem for quantum logics

International Nuclear Information System (INIS)

Sharma, C.S.; Mukherjee, M.K.

1977-01-01

Two theorems are proved. In the first properties of an important mapping from an orthocomplemented lattice to itself are studied. In the second the characterisation theorem of Zierler (Pacific J. Math.; 11:1151 (1961)) is extended to obtain a very useful theorem characterising orthomodular lattices. Since quantum logics are merely sigma-complete orthomodular lattices, the principal result is, for application in quantum physics, a characterisation theorem for quantum logics. (author)
Statistical Image Analysis of Tomograms with Application to Fibre Geometry Characterisation

DEFF Research Database (Denmark)

Emerson, Monica Jane

The goal of this thesis is to develop statistical image analysis tools to characterise the micro-structure of complex materials used in energy technologies, with a strong focus on fibre composites. These quantification tools are based on extracting geometrical parameters defining structures from 2D...... with high resolution both in space and time to observe fast micro-structural changes. This thesis demonstrates that statistical image analysis combined with X-ray CT opens up numerous possibilities for understanding the behaviour of fibre composites under real life conditions. Besides enabling...
Fabrication and Characterisation of Low-noise Monolithic Mode-locked Lasers

DEFF Research Database (Denmark)

Larsson, David

2007-01-01

This thesis deals with the fabrication and characterisation of monolithic semiconductor mode-locked lasers for use in optical communication systems. Other foreseeable applications may be as sources in microwave photonics and optical sampling. The thesis also deals with the design and fabrication...... of intracavity monolithically integrated filters. The common dnominator among the diffrent parts of the thesis is how to achieve and measure the lowest possible noise. Achieving low noise has been pinpointed as one of the most important and difficult challenges for semiconductor mode-locked lasers. The main...... result of this thesis are a fabrication process of a monolithic and deeply etched distributed Bragg reflector and a characterisation system for measurement of quantum limitid timing noise at high repetition rates. The Bragg reflector is a key component in achieving transform limited pulses with low noise...
Radiometric sand mud characterisation in the Rhine-Meuse estuary part B. In situ mapping

NARCIS (Netherlands)

van Wijngaarden, M; Venema, LB; De Meijer, RJ

2002-01-01

Traditionally, obtaining accurate spatial information about the textural composition of heterogeneous aquatic sediments requires extensive sediment sampling. To avoid a costly and time-consuming operation, a new in situ technique has been investigated. This technique characterises sediment
Characterisation of North American Brucella isolates from marine mammals.

Science.gov (United States)

Whatmore, Adrian M; Dawson, Claire; Muchowski, Jakub; Perrett, Lorraine L; Stubberfield, Emma; Koylass, Mark; Foster, Geoffrey; Davison, Nicholas J; Quance, Christine; Sidor, Inga F; Field, Cara L; St Leger, Judy

2017-01-01

Extension of known ecological niches of Brucella has included the description of two novel species from marine mammals. Brucella pinnipedialis is associated predominantly with seals, while two major Brucella ceti clades, most commonly associated with porpoises or dolphins respectively, have been identified. To date there has been limited characterisation of Brucella isolates obtained from marine mammals outside Northern European waters, including North American waters. To address this gap, and extend knowledge of the global population structure and host associations of these Brucella species, 61 isolates from marine mammals inhabiting North American waters were subject to molecular and phenotypic characterisation enabling comparison with existing European isolates. The majority of isolates represent genotypes previously described in Europe although novel genotypes were identified in both B. ceti clades. Harp seals were found to carry B. pinnipedialis genotypes previously confined to hooded seals among a diverse repertoire of sequence types (STs) associated with this species. For the first time Brucella isolates were characterised from beluga whales and found to represent a number of distinct B. pinnipedialis genotypes. In addition the known host range of ST27 was extended with the identification of this ST from California sea lion samples. Finally the performance of the frequently used diagnostic tool Bruce-ladder, in differentiating B. ceti and B. pinnipedialis, was critically assessed based on improved knowledge of the global population structure of Brucella associated with marine mammals.
Characterisation of Tmmmian Local Sorghmn Varieties

African Journals Online (AJOL)

Many local varieties of sorghum grown in Tanzania have not been characterised in terms of their end uses. This study was conducted to characterise 14 such varieties. Three improved varieties commonly grown in this country were includedfor comparison. Physical analyses that included 100-grain weight, percent dehulling ...
Characterising a historical bridge’s bricks in Popayán (Colombia

Directory of Open Access Journals (Sweden)

Jorge Alberto Galindo Díaz

2008-05-01

Full Text Available This article presents the procedures and results of studying the physical-mechanical and chemical-mineralogical cha-racterisation of the bricks originally used in a masonry arch bridge; the bridge was built in the first half of the 18th century in the city of Popayán, Colombia. Core-samples were thus extracted from the bridge’s lower area and sub-jected to different laboratory tests. Physical-mechanical characterisation quantified values related to dry weight, sus-pended weight, saturated weight, porosity, apparent gravity, apparent density and maximum load values, cold com-pression resistance and elasticity modulus. The results revealed the bricks’ high porosity and their low resistance to compression stress. Chemical-mineralogical characterisation involved a combination of tests including X-ray diffract-tion (XRD, X-ray photoelectron spectroscopy (XPS and Fourier transformed infra-red spectroscopy (FTIR. Several mi-nerals found led to deducting the source of the raw material, as well as verifying some brick production characteris-tics of the time in the said region. Tridimite, cristobalite, magnetite and calcium carbonate were some of the phases formed by the temperatures reached while firing the bricks, while potassium sulphate presence in one of the samples conveyed the nature of the construction materials’ production characteristics. Combining XRD and XPS analysis pro-vided information about firing temperature and the new mineralogical phases appearing at the end of this process; FTIR proved functional OH and Si-O-Si group presence. These bricks’ characteristics provided valuable data for res-toration purposes, formulating a new brick from raw material complying with reconstruction requirements.
Characterisation of organic thin film coatings on automobile steel sheets by photothermal methods

Energy Technology Data Exchange (ETDEWEB)

Orth, T. [Salzgitter Mannesmann Forschung GmbH, Duisburg (Germany); Fluegge, W. [Salzgitter Mannesmann Forschung GmbH, Salzgitter (Germany); Gibkes, J. [Ruhr-Univ. Bochum (Germany). AG FestKoerperSpektroskopie

2006-07-01

In the nineties, the first generation of organic thin film coatings for corrosion protection of zinc-coated thin sheet steel have been introduced. The coating typically consists of a suspension of small zinc particles, embedded in a polymer matrix. In the scope of quality control, the characterisation of the resulting layer structure is of great interest, comprising not only a constant layer thickness and a local homogeneity of the coating, but also the depth distribution of the particles within the layer. Especially the latter parameter does have a direct influence on the spot weldability of the steel sheets. The present work shows, how photothermal methods like modulated infrared radiometry and photoacoustics can be used for a successful depth profiling of the thin film coatings. The sample surface is periodically heated using an intensitymodulated laser beam, and a thermal wave is induced in the layer system. By variation of the modulation frequency of the laser beam, the thermal diffusion length and, as a consequence, the penetration depth of the thermal wave can be adjusted. By a suitable evaluation of the amplitude and phase lag signals as a function of the modulation frequency, accurate depth profiling has been realized which can be used for a very reliable prediction of the welding properties of the product. In the first investigations, artificial samples with well defined extreme distributions of the particles have been analyzed, and in a second step, an evaluation strategy has been developed for real production samples. (orig.)
Characterisation factors for life cycle impact assessment of sound emissions.

Science.gov (United States)

Cucurachi, S; Heijungs, R

2014-01-15

Noise is a serious stressor affecting the health of millions of citizens. It has been suggested that disturbance by noise is responsible for a substantial part of the damage to human health. However, no recommended approach to address noise impacts was proposed by the handbook for life cycle assessment (LCA) of the European Commission, nor are characterisation factors (CFs) and appropriate inventory data available in commonly used databases. This contribution provides CFs to allow for the quantification of noise impacts on human health in the LCA framework. Noise propagation standards and international reports on acoustics and noise impacts were used to define the model parameters. Spatial data was used to calculate spatially-defined CFs in the form of 10-by-10-km maps. The results of this analysis were combined with data from the literature to select input data for representative archetypal situations of emission (e.g. urban day with a frequency of 63 Hz, rural night at 8000 Hz, etc.). A total of 32 spatial and 216 archetypal CFs were produced to evaluate noise impacts at a European level (i.e. EU27). The possibility of a user-defined characterisation factor was added to support the possibility of portraying the situation of full availability of information, as well as a highly-localised impact analysis. A Monte Carlo-based quantitative global sensitivity analysis method was applied to evaluate the importance of the input factors in determining the variance of the output. The factors produced are ready to be implemented in the available LCA databases and software. The spatial approach and archetypal approach may be combined and selected according to the amount of information available and the life cycle under study. The framework proposed and used for calculations is flexible enough to be expanded to account for impacts on target subjects other than humans and to continents other than Europe. © 2013 Elsevier B.V. All rights reserved.
Defining and Distinguishing Secular and Religious Terrorism

Directory of Open Access Journals (Sweden)

Heather S. Gregg

2014-04-01

Full Text Available Religious terrorism is typically characterised as acts of unrestrained, irrational and indiscriminant violence, thus offering few if any policy options for counterterrorism measures. This assumption about religious terrorism stems from two challenges in the literature: disproportionate attention to apocalyptic terrorism, and a lack of distinction between religious terrorism and its secular counterpart. This article, therefore, aims to do four things: define and differentiate religiously motivated terrorism from traditional terrorism; investigate three goals of religious terrorism (fomenting the apocalypse, creating a religious government, and establishing a religiously pure state; consider the role of leadership and target selection of religious terrorists; and, finally, suggest a range of counterterrorism strategies based on these observations.
Characterisation and treatment of VOCs in process water from upgrading facilities for compressed biogas (CBG).

Science.gov (United States)

Nilsson Påledal, S; Arrhenius, K; Moestedt, J; Engelbrektsson, J; Stensen, K

2016-02-01

Compression and upgrading of biogas to vehicle fuel generates process water, which to varying degrees contains volatile organic compounds (VOCs) originating from the biogas. The compostion of this process water has not yet been studied and scientifically published and there is currently an uncertainty regarding content of VOCs and how the process water should be managed to minimise the impact on health and the environment. The aim of the study was to give an overview about general levels of VOCs in the process water. Characterisation of process water from amine and water scrubbers at plants digesting waste, sewage sludge or agricultural residues showed that both the average concentration and composition of particular VOCs varied depending on the substrate used at the biogas plant, but the divergence was high and the differences for total concentrations from the different substrate groups were only significant for samples from plants using waste compared to residues from agriculture. The characterisation also showed that the content of VOCs varied greatly between different sampling points for same main substrate and between sampling occasions at the same sampling point, indicating that site-specific conditions are important for the results which also indicates that a number of analyses at different times are required in order to make an more exact characterisation with low uncertainty. Inhibition of VOCs in the anaerobic digestion (AD) process was studied in biomethane potential tests, but no inhibition was observed during addition of synthetic process water at concentrations of 11.6 mg and 238 mg VOC/L. Copyright © 2015 Elsevier Ltd. All rights reserved.
Mass spectrometry based approach for identification and characterisation of fluorescent proteins from marine organisms

DEFF Research Database (Denmark)

Wojdyla, Katarzyna Iwona; Rogowska-Wrzesinska, Adelina; Wrzesinski, Krzysztof

2011-01-01

We present here a new analytical strategy for identification and characterisation of fluorescent proteins from marine organisms. By applying basic proteomics tools it is possible to screen large sample collections for fluorescent proteins of desired characteristics prior to gene cloning. Our...
Forsmark site characterisation - Borehole KFM22 and KFM23: Derivation of porewater data by diffusion experiments

Energy Technology Data Exchange (ETDEWEB)

Waber, H. N. [Rock Water Interaction, University of Bern, Bern (Switzerland); Smellie, J. A. T. [Conterra AB, Partille (Sweden)

2012-04-15

Within the Detum Project (Detailed Investigations in Forsmark) a 'Methodology comparison for porewater extraction and characterisation techniques' was initiated. This has centred on two shallow boreholes drilled at Soederviken within the northern part of the Forsmark characterisation site. The comparison includes different methodologies to characterise the chemical and isotopic composition of porewater residing in the connected pore space of the rock matrix. The present report describes the chemical and isotopic information of the porewater obtained by out-diffusion experiments and the diffusive isotope equilibration technique applied to originally water saturated drillcore samples. In addition, petrophysical data and solute transport properties of the rock matrix, all necessary for porewater characterisation, have also been elaborated. Specially conditioned drillcore samples were obtained from depths of less than 100 m from boreholes KFM22 and KFM23. Porewater has been extracted successfully from seven samples by laboratory out-diffusion and diffusive isotope exchange methods. The methodology to extract and analyse the porewater is outlined and the analytical data are tabulated. The data are critically reviewed for potential experimental artefacts and their significance with respect to in situ conditions. The connected pore space in the core material representing borehole KFM22 and KFM23 was measured on different types of originally saturated drillcore samples using gravimetric and isotope mass balance methods. Out-diffusion experiments were performed on kg-sized drillcore samples to derive the in situ concentration of the chemically conservative compounds chloride and bromide. The attainment of equilibrium conditions in the out-diffusion experiments was monitored by the concentration change of chloride and bromide as a function of time. The water isotope composition of porewater was determined by the diffusive isotope equilibration technique and by
Characterisation of the ecotoxicity of hospital effluents: a review.

Science.gov (United States)

Orias, Frédéric; Perrodin, Yves

2013-06-01

The multiple activities that take place in hospitals (surgery, drug treatments, radiology, cleaning of premises and linen, chemical and biological analysis laboratories, etc.), are a major source of pollutant emissions into the environment (disinfectants, detergents, drug residues, etc.). Most of these pollutants can be found in hospital effluents (HWW), then in urban sewer networks and WWTP (weakly adapted for their treatment) and finally in aquatic environments. In view to evaluating the impact of these pollutants on aquatic ecosystems, it is necessary to characterise their ecotoxicity. Several reviews have focused on the quantitative and qualitative characterisation of pollutants present in HWW. However, none have focused specifically on the characterisation of their experimental ecotoxicity. We have evaluated this according to two complementary approaches: (i) a "substance" approach based on the identification of the experimental data in the literature for different substances found in hospital effluents, and on the calculation of their PNEC (Predicted Non Effect Concentration), (ii) a "matrix" approach for which we have synthesised ecotoxicity data obtained from the hospital effluents directly. This work first highlights the diversity of the substances present within hospital effluents, and the very high ecotoxicity of some of them (minimum PNEC observed close to 0,01 pg/L). We also observed that the consumption of drugs in hospitals was a predominant factor chosen by authors to prioritise the compounds to be sought. Other criteria such as biodegradability, excretion rate and the bioaccumulability of pollutants are considered, though more rarely. Studies of the ecotoxicity of the particulate phase of effluents must also be taken into account. It is also necessary to monitor the effluents of each of the specialised departments of the hospital studied. These steps is necessary to define realistic environmental management policies for hospitals (replacement of
Physiochemical characterisation of mangafodipir trisodium

International Nuclear Information System (INIS)

Tirkkonen, B.; Grace, D.; Haile, Y.; Holm, K.M.; Hope, H.; Larsen, Aa.; Lunde, H.S.; Sjoegren, C.E.

1997-01-01

Purpose: To determine the structure and various physicochemical properties of mangafodipir (MnDPDP) trisodium, the active ingredient of Teslascan, a new organ-specific contrast medium for MR imaging. Material and Methods: The structure of MnDPDP trisodium crystals was determined by X-ray crystallography. The possible existence of polymorphism in MnDPDI trisodium was evaluated by powder X-ray diffraction, optical microscopy, thermal analysis and IR spectroscopy. In addition, various spectroscopic techniques and phyicochemical measurements were used for characterisation of MnDPDP trisodium. Results: The crystallogrpahic data obtained for MnDPDP trisodium show that the general core structure of the MnDPDP anion is similar to that seen in related substances. The metal coordination geometry is a distorted octahedron defined by 2 phenolate oxygens, 2 carboxylate oxygens and 2 amine nitrogens. The unit cell contains 2 MnDPDP anions, 6 sodium ions and 50 water molecules. The various spectroscopic data are consistent with the structure determined by X-ray crystallography. The product (Teslascan) has low viscosity, is isotonic with blood and has a physiological pH. (orig./AJ)
Characterisation methods for the hyperspectral sensor HySpex at DLR's calibration home base

Science.gov (United States)

Baumgartner, Andreas; Gege, Peter; Köhler, Claas; Lenhard, Karim; Schwarzmaier, Thomas

2012-09-01

The German Aerospace Center's (DLR) Remote Sensing Technology Institute (IMF) operates a laboratory for the characterisation of imaging spectrometers. Originally designed as Calibration Home Base (CHB) for the imaging spectrometer APEX, the laboratory can be used to characterise nearly every airborne hyperspectral system. Characterisation methods will be demonstrated exemplarily with HySpex, an airborne imaging spectrometer system from Norsk Elektro Optikks A/S (NEO). Consisting of two separate devices (VNIR-1600 and SWIR-320me) the setup covers the spectral range from 400 nm to 2500 nm. Both airborne sensors have been characterised at NEO. This includes measurement of spectral and spatial resolution and misregistration, polarisation sensitivity, signal to noise ratios and the radiometric response. The same parameters have been examined at the CHB and were used to validate the NEO measurements. Additionally, the line spread functions (LSF) in across and along track direction and the spectral response functions (SRF) for certain detector pixels were measured. The high degree of lab automation allows the determination of the SRFs and LSFs for a large amount of sampling points. Despite this, the measurement of these functions for every detector element would be too time-consuming as typical detectors have 105 elements. But with enough sampling points it is possible to interpolate the attributes of the remaining pixels. The knowledge of these properties for every detector element allows the quantification of spectral and spatial misregistration (smile and keystone) and a better calibration of airborne data. Further laboratory measurements are used to validate the models for the spectral and spatial properties of the imaging spectrometers. Compared to the future German spaceborne hyperspectral Imager EnMAP, the HySpex sensors have the same or higher spectral and spatial resolution. Therefore, airborne data will be used to prepare for and validate the spaceborne system
Acidity titration curves - a versatile tool for the characterisation of acidic mine waste water

International Nuclear Information System (INIS)

Fyson, A.

2000-01-01

Acidity titrations with NaOH are valuable tools for characterisation of acidic mine waters. - Titrations can be used to estimate metal concentrations. - Titrations can be carried out in the field, minimising changes in water chemistry due to sample handling time and procedure. (orig.)
Characterisation of North American Brucella isolates from marine mammals.

Directory of Open Access Journals (Sweden)

Adrian M Whatmore

Full Text Available Extension of known ecological niches of Brucella has included the description of two novel species from marine mammals. Brucella pinnipedialis is associated predominantly with seals, while two major Brucella ceti clades, most commonly associated with porpoises or dolphins respectively, have been identified. To date there has been limited characterisation of Brucella isolates obtained from marine mammals outside Northern European waters, including North American waters. To address this gap, and extend knowledge of the global population structure and host associations of these Brucella species, 61 isolates from marine mammals inhabiting North American waters were subject to molecular and phenotypic characterisation enabling comparison with existing European isolates. The majority of isolates represent genotypes previously described in Europe although novel genotypes were identified in both B. ceti clades. Harp seals were found to carry B. pinnipedialis genotypes previously confined to hooded seals among a diverse repertoire of sequence types (STs associated with this species. For the first time Brucella isolates were characterised from beluga whales and found to represent a number of distinct B. pinnipedialis genotypes. In addition the known host range of ST27 was extended with the identification of this ST from California sea lion samples. Finally the performance of the frequently used diagnostic tool Bruce-ladder, in differentiating B. ceti and B. pinnipedialis, was critically assessed based on improved knowledge of the global population structure of Brucella associated with marine mammals.

Initial site characterisation of a dissolved hydrocarbon groundwater plume discharging to a surface water environment

International Nuclear Information System (INIS)

Westbrook, S.J.; Commonwealth Scientific and Industrial Research Organisation Land and Water, Wembley, WA; Davis, G.B.; Rayner, J.L.; Fisher, S.J.; Clement, T.P.

2000-01-01

Preliminary characterisation of a dissolved hydrocarbon groundwater plume flowing towards a tidally- and seasonally-forced estuarine system has been completed at a site in Perth, Western Australia. Installation and sampling of multiport boreholes enabled fine scale (0.5-m) vertical definition of hydrocarbon concentrations. Vertical electrical conductivity profiles from multiport and spear probe sampling into the river sediments indicated that two groundwater/river water interfaces or dispersion zones are present: (a) an upper dispersion zone between brackish river water and groundwater, and (b) a lower interface between groundwater and deeper saline water. On-line water level loggers show that near-shore groundwater levels are also strongly influence by tidal oscillation. Results from the initial site characterisation will be used to plan further investigations of contaminated groundwater/surface water interactions and the biodegradation processes occurring at the site
Development and characterisation of supramolecular autovectoring system for selective drug delivery.

Science.gov (United States)

Jaitely, V; Vyas, S P

1999-01-01

Supramolecules since ages have been characterised as self-associating systems emanating the properties directly related to the mode of molecular association. Similar to supramolecules, liquid crystals may also be considered as an associated system. The liquid crystals are defined as the state of matter with the characterstic order of the crystal and the mobility of liquid. The system has been compared to the transporting form of cholesterol in body. The present study reports autovectoring potentials of the drug liquid crystals using diclofenac diethylammonium (DD) as a model. The drug based liquid crystals of DD were prepared employing temperature induced transformation of isotropic form to the liquid crystal form. The prepared liquid crystal systems were incubated with 1% phosphatidylcholine in order to stabilise the surface and restrict it into the liquid crystalline state. The system was characterised for viscosity variation, X-ray diffraction pattern, partitioning behaviour and in vitro diffusion profile. In vivo vectorising potential of the developed system was evaluated using rats as test animal and studying for the organ level distribution and drug compartmentalisation. The system exhibited satisfactory vecterisation as significant amount of administered dose was localised selectively in liver.
Methods for High-throughput Characterisation of Environmental DNA

DEFF Research Database (Denmark)

Andersen, Kenneth

This PhD thesis examines the potential of describing biodiversity of green plants (Viridiplantae), birds (Aves) and mammals (Mammalia), in the context of next-generation sequencing, from the DNA that all organisms segregate into the environment (eDNA). The research is based on case studies...... of species assemblages described by eDNA recovered from contemporary surface soil and Holocene sediment sequences, to assess the accuracy and limitations of the approach. Biodiversity incorporates two aspects of ecological communities, including both the taxonomic richness and abundance of individual taxa...... inhibition. In chapter four, alternative DNA extraction protocols and pipelines for characterising plant eDNA are tested on samples from contrasting environments including modern, Holocene and Pleistocene sediment samples. These results are compared to pollen and macrofossil records described from earlier...
SYNTHESIS AND CHARACTERISATION OF Ni0.25Co0.75Fe2O4 ...

African Journals Online (AJOL)

characterised for their size and structure using X-ray diffraction (XRD), high .... the sample shows broad peaks, indicating the fine crystalline nature of the particles. ... Zhao, L.J.; Zhang, H.J.; Xing,Y.; Song, S.Y.; Yu, S.Y.; Shi, W.D.; Guo, X.M.; ...
Characterisation of wastewater for modelling of wastewater ...

African Journals Online (AJOL)

Bio-process modelling is increasingly used in design, modification and troubleshooting of wastewater treatment plants (WWTPs). Characterisation of the influent wastewater to a WWTP is an important part of developing such a model. The characterisation required for modelling is more detailed than that routinely employed ...
Characterisation and application of NovaFiber lignin

NARCIS (Netherlands)

Gosselink, R.J.A.; Snijder, M.H.B.; Kranenbarg, A.; Keijsers, E.R.P.; Jong, de E.; Stigsson, L.L.

2004-01-01

Sulphur-free lignin coming from a novel alkaline-pulping process called NovaFiber, which has been developed by KIRAM AB, has been characterised and evaluated for potential applications. A Kraft lignin has been used for comparison. Considering the characterisation results of a NovaFiber softwood and
Characterisation of nanomaterial hydrophobicity using engineered surfaces

Energy Technology Data Exchange (ETDEWEB)

Desmet, Cloé; Valsesia, Andrea; Oddo, Arianna; Ceccone, Giacomo; Spampinato, Valentina; Rossi, François; Colpo, Pascal, E-mail: pascal.colpo@ec.europa.eu [Directorate Health, Consumer and Reference Materials, Consumer Products Safety Unit (Italy)

2017-03-15

Characterisation of engineered nanomaterials (NMs) is of outmost importance for the assessment of the potential risks arising from their extensive use. NMs display indeed a large variety of physico-chemical properties that drastically affect their interaction with biological systems. Among them, hydrophobicity is an important property that is nevertheless only slightly covered by the current physico-chemical characterisation techniques. In this work, we developed a method for the direct characterisation of NM hydrophobicity. The determination of the nanomaterial hydrophobic character is carried out by the direct measurement of the affinity of the NMs for different collectors. Each collector is an engineered surface designed in order to present specific surface charge and hydrophobicity degrees. Being thus characterised by a combination of surface energy components, the collectors enable the NM immobilisation with surface coverage in relation to their hydrophobicity. The experimental results are explained by using the extended DLVO theory, which takes into account the hydrophobic forces acting between NMs and collectors.
Characterisation of wood combustion ashes

DEFF Research Database (Denmark)

Maresca, Alberto

The combustion of wood chips and wood pellets for the production of renewable energy in Denmark increased from 5.7 PJ to 16 PJ during the period 2000-2015, and further increases are expected to occur within the coming years. In 2012, about 22,300 tonnes of wood ashes were generated in Denmark....... Currently, these ashes are mainly landfilled, despite Danish legislation allowing their application onto forest and agricultural soils for fertilising and/or liming purposes. During this PhD work, 16 wood ash samples generated at ten different Danish combustion plants were collected and characterised...... for their composition and leaching properties. Despite the relatively large variations in the contents of nutrients and trace metals, the overall levels were comparable to typical ranges reported in the literature for other wood combustion ashes, as well as with regards to leaching. In general, the composition...
Synthesis and characterisation of mucoadhesive thiolated polyallylamine.

Science.gov (United States)

Duggan, Sarah; Hughes, Helen; Owens, Eleanor; Duggan, Elaine; Cummins, Wayne; O' Donovan, Orla

2016-02-29

The thiolation of polyallylamine (PAAm) for use in mucoadhesive drug delivery has been achieved. PAAm was reacted with different ratios of Traut's reagent, yielding products with thiol contents ranging from 134-487μmol/g. Full mucoadhesive characterisation of the thiolated PAAm samples was conducted using swelling studies, mucoadhesive testing on porcine intestinal tissue and rheology. Both swelling and cohesive properties of the thiolated PAAm products were vastly improved in comparison to an unmodified PAAm control. The swelling abilities of the thiolated samples were high and the degree of thiolation of the products affected the initial rate of swelling. High levels of mucoadhesion were demonstrated by the thiolated PAAm samples, with adhesion times of greater than 24h measured for all three samples and, thus, thiol content did not appear to influence mucoadhesion. Rheological studies of the thiolated PAAm samples showed an increase in G' and G″ values upon the addition of a mucin solution which was not observed in the unmodified control, again highlighting the mucoadhesive interactions between these thiolated polymers and mucin. The synthesis of thiolated PAAm by reaction with Traut's reagent and resulting mucoadhesive properties demonstrates its potential for use a mucoadhesive drug delivery device. Copyright © 2016 Elsevier B.V. All rights reserved.
Characterisation by multilocus sequence and porA and flaA typing of Campylobacter jejuni isolated from samples of dog faeces collected in one city in New Zealand.

Science.gov (United States)

Mohan, V; Stevenson, M A; Marshall, J C; French, N P

2017-07-01

To investigate the prevalence of Campylobacter spp. and C. jejuni in dog faecal material collected from dog walkways in the city of Palmerston North, New Zealand, and to characterise the C. jejuni isolates by multilocus sequence typing (MLST) and porA and flaA antigen gene typing. A total of 355 fresh samples of dogs faeces were collected from bins provided for the disposal of dog faeces in 10 walkways in Palmerston North, New Zealand, between August 2008-July 2009. Presumptive Campylobacter colonies, cultured on modified charcoal cefoperazone deoxycholate plates, were screened for genus Campylobacter and C. jejuni by PCR. The C. jejuni isolates were subsequently characterised by MLST and porA and flaA typing, and C. jejuni sequence types (ST) were assigned. Of the 355 samples collected, 72 (20 (95% CI=16-25)%) were positive for Campylobacter spp. and 22 (6 (95% CI=4-9)%) were positive for C. jejuni. Of the 22 C. jejuni isolates, 19 were fully typed by MLST. Ten isolates were assigned to the clonal complex ST-45 and three to ST-52. The allelic combinations of ST-45/flaA 21/porA 44 (n=3), ST-45/flaA 22/porA 53 (n=3) and ST-52/ flaA 57/porA 905 (n=3) were most frequent. The successful isolation of C. jejuni from canine faecal samples collected from faecal bins provides evidence that Campylobacter spp. may survive outside the host for at least several hours despite requiring fastidious growth conditions in culture. The results show that dogs carry C. jejuni genotypes (ST-45, ST-50, ST-52 and ST-696) that have been reported in human clinical cases. Although these results do not provide any evidence either for the direction of infection or for dogs being a potential risk factor for human campylobacteriosis, dog owners are advised to practice good hygiene with respect to their pets to reduce potential exposure to infection.
An individual urinary proteome analysis in normal human beings to define the minimal sample number to represent the normal urinary proteome

Directory of Open Access Journals (Sweden)

Liu Xuejiao

2012-11-01

Full Text Available Abstract Background The urinary proteome has been widely used for biomarker discovery. A urinary proteome database from normal humans can provide a background for discovery proteomics and candidate proteins/peptides for targeted proteomics. Therefore, it is necessary to define the minimum number of individuals required for sampling to represent the normal urinary proteome. Methods In this study, inter-individual and inter-gender variations of urinary proteome were taken into consideration to achieve a representative database. An individual analysis was performed on overnight urine samples from 20 normal volunteers (10 males and 10 females by 1DLC/MS/MS. To obtain a representative result of each sample, a replicate 1DLCMS/MS analysis was performed. The minimal sample number was estimated by statistical analysis. Results For qualitative analysis, less than 5% of new proteins/peptides were identified in a male/female normal group by adding a new sample when the sample number exceeded nine. In addition, in a normal group, the percentage of newly identified proteins/peptides was less than 5% upon adding a new sample when the sample number reached 10. Furthermore, a statistical analysis indicated that urinary proteomes from normal males and females showed different patterns. For quantitative analysis, the variation of protein abundance was defined by spectrum count and western blotting methods. And then the minimal sample number for quantitative proteomic analysis was identified. Conclusions For qualitative analysis, when considering the inter-individual and inter-gender variations, the minimum sample number is 10 and requires a balanced number of males and females in order to obtain a representative normal human urinary proteome. For quantitative analysis, the minimal sample number is much greater than that for qualitative analysis and depends on the experimental methods used for quantification.
Low tumour cell content in a lung tumour bank: implications for molecular characterisation.

Science.gov (United States)

Goh, Felicia; Duhig, Edwina E; Clarke, Belinda E; McCaul, Elizabeth; Passmore, Linda; Courtney, Deborah; Windsor, Morgan; Naidoo, Rishendren; Franz, Louise; Parsonson, Kylie; Yang, Ian A; Bowman, Rayleen V; Fong, Kwun M

2017-10-01

Lung cancer encompasses multiple malignant epithelial tumour types, each with specific targetable, potentially actionable mutations, such that precision management mandates accurate tumour typing. Molecular characterisation studies require high tumour cell content and low necrosis content, yet lung cancers are frequently a heterogeneous mixture of tumour and stromal cells. We hypothesised that there may be systematic differences in tumour cell content according to histological subtype, and that this may have implications for tumour banks as a resource for comprehensive molecular characterisation studies in lung cancer. To investigate this, we estimated tumour cell and necrosis content of 4267 samples resected from 752 primary lung tumour specimens contributed to a lung tissue bank. We found that banked lung cancer samples had low tumour cell content (33%) generally, although it was higher in carcinoids (77.5%) than other lung cancer subtypes. Tumour cells comprise a variable and often small component of banked resected tumour samples, and are accompanied by stromal reaction, inflammation, fibrosis, and normal structures. This has implications for the adequacy of unselected tumour bank samples for diagnostic and molecular investigations, and further research is needed to determine whether tumour cell content has a significant impact on analytical results in studies using tissue from tumour bank resources. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.
Characterisation and discrimination of various types of lac resin using gas chromatography mass spectrometry techniques with quaternary ammonium reagents.

Science.gov (United States)

Sutherland, K; del Río, J C

2014-04-18

A variety of lac resin samples obtained from artists' suppliers, industrial manufacturers, and museum collections were analysed using gas chromatography mass spectrometry (GCMS) and reactive pyrolysis GCMS with quaternary ammonium reagents. These techniques allowed a detailed chemical characterisation of microgram-sized samples, based on the detection and identification of derivatives of the hydroxy aliphatic and cyclic (sesquiterpene) acids that compose the resin. Differences in composition could be related to the nature of the resin, e.g. wax-containing (unrefined), bleached, or aged samples. Furthermore, differences in the relative abundances of aliphatic hydroxyacids appear to be associated with the biological source of the resin. The diagnostic value of newly characterised lac components, including 8-hydroxyacids, is discussed here for the first time. Identification of derivatised components was aided by AMDIS deconvolution software, and discrimination of samples was enhanced by statistical evaluation of data using principal component analysis. The robustness of the analyses, together with the minimal sample size required, make these very powerful approaches for the characterisation of lac resin in museum objects. The value of such analyses for enhancing the understanding of museum collections is illustrated by two case studies of objects in the collection of the Philadelphia Museum of Art: a restorer's varnish on a painting by Luca Signorelli, and a pictorial inlay in an early nineteenth-century High Chest by George Dyer. Copyright © 2014 Elsevier B.V. All rights reserved.
Application of Passive Sampling to Characterise the Fish Exometabolome

Directory of Open Access Journals (Sweden)

Mark R. Viant

2017-02-01

Full Text Available The endogenous metabolites excreted by organisms into their surrounding environment, termed the exometabolome, are important for many processes including chemical communication. In fish biology, such metabolites are also known to be informative markers of physiological status. While metabolomics is increasingly used to investigate the endogenous biochemistry of organisms, no non-targeted studies of the metabolic complexity of fish exometabolomes have been reported to date. In environmental chemistry, Chemcatcher® (Portsmouth, UK passive samplers have been developed to sample for micro-pollutants in water. Given the importance of the fish exometabolome, we sought to evaluate the capability of Chemcatcher® samplers to capture a broad spectrum of endogenous metabolites excreted by fish and to measure these using non-targeted direct infusion mass spectrometry metabolomics. The capabilities of C18 and styrene divinylbenzene reversed-phase sulfonated (SDB-RPS Empore™ disks for capturing non-polar and polar metabolites, respectively, were compared. Furthermore, we investigated real, complex metabolite mixtures excreted from two model fish species, rainbow trout (Oncorhynchus mykiss and three-spined stickleback (Gasterosteus aculeatus. In total, 344 biological samples and 28 QC samples were analysed, revealing 646 and 215 m/z peaks from trout and stickleback, respectively. The measured exometabolomes were principally affected by the type of Empore™ (Hemel Hempstead, UK disk and also by the sampling time. Many peaks were putatively annotated, including several bile acids (e.g., chenodeoxycholate, taurocholate, glycocholate, glycolithocholate, glycochenodeoxycholate, glycodeoxycholate. Collectively these observations show the ability of Chemcatcher® passive samplers to capture endogenous metabolites excreted from fish.
Laser detritiation and co-deposited layer characterisation for future ITER Installation

International Nuclear Information System (INIS)

Semerok, Alexandre; Brygo, Francois; Fomichev, Sergey V.; Champonnois, Francois; Weulersse, Jean-Marc; Thro, Pierre-Yves; Fichet, Pascal; Grisolia, Christian

2006-01-01

The experimental equipment in combination with pulsed Nd-YAG lasers was developed and applied to investigate co-deposited layer characterisation and ablation. Heating and ablation regimes were distinguished by ablation threshold fluence that was determined experimentally for graphite samples from TexTor (Germany) and TORE SUPRA (France) tokamaks. With 100 ns pulses, the ablation threshold for graphite substrate (2.5±0.5 J/cm 2 ) was much higher than the one for co-deposited layer (0.4±0.1 J cm -2 ). These threshold features are very promising to ensure self-controlled laser cleaning without substrate surface damage. The obtained optimal conditions (laser fluence F=1-2 J/cm 2 , 10-20 kHz repetition rate) were applied for co-deposited layer cleaning. The TexTor 50 μm thickness layer was almost completely removed after a single scanning without any damage of the graphite substrate. Cleaning rate of 0.2 m 2 /hour was demonstrated experimentally for 20 W mean laser power. A theoretical model of a complex surface heating (graphite or metal with a co-deposited layer) was developed to explain the experimental results and to obtain laser cleaning optimisation. A good agreement of the theoretical data with the experimental results was obtained. The studies on LIBS method for co-deposited layer characterisation have determined the analytical spectral lines for hydrogen, carbon, and other impurities (B, Fe, Si, and Cu) in TexTor graphite tile. The obtained results should be regarded optimistic for co-deposited layers characterisation by LIBS method. The development of certain laser methods and their application for in-situ detritiation and co-deposited layer characterisation are presented and discussed. (authors)
Waste package characterisation

Energy Technology Data Exchange (ETDEWEB)

Sannen, L.; Bruggeman, M.; Wannijn, J.P

1998-09-01

Radioactive wastes originating from the hot labs of the Belgian Nuclear Research Centre SCK-CEN contain a wide variety of radiotoxic substances. The accurate characterisation of the short- and long-term radiotoxic components is extremely difficult but required in view of geological disposal. This paper describes the methodology which was developed and adopted to characterise the high- and medium-level waste packages at the SCK-CEN hot laboratories. The proposed method is based on the estimation of the fuel inventory evacuated in a particular waste package; a calculation of the relative fission product contribution on the fuel fabrication and irradiation footing; a comparison of the calculated, as expected, dose rate and the real measured dose rate of the waste package. To cope with the daily practice an appropriate fuel inventory estimation route, a user friendly computer programme for fission product and corresponding dose rate calculation, and a simple dose rate measurement method have been developed and implemented.
Waste package characterisation

International Nuclear Information System (INIS)

Sannen, L.; Bruggeman, M.; Wannijn, J.P.

1998-09-01

Radioactive wastes originating from the hot labs of the Belgian Nuclear Research Centre SCK-CEN contain a wide variety of radiotoxic substances. The accurate characterisation of the short- and long-term radiotoxic components is extremely difficult but required in view of geological disposal. This paper describes the methodology which was developed and adopted to characterise the high- and medium-level waste packages at the SCK-CEN hot laboratories. The proposed method is based on the estimation of the fuel inventory evacuated in a particular waste package; a calculation of the relative fission product contribution on the fuel fabrication and irradiation footing; a comparison of the calculated, as expected, dose rate and the real measured dose rate of the waste package. To cope with the daily practice an appropriate fuel inventory estimation route, a user friendly computer programme for fission product and corresponding dose rate calculation, and a simple dose rate measurement method have been developed and implemented
Statistical benchmark for BosonSampling

International Nuclear Information System (INIS)

Walschaers, Mattia; Mayer, Klaus; Buchleitner, Andreas; Kuipers, Jack; Urbina, Juan-Diego; Richter, Klaus; Tichy, Malte Christopher

2016-01-01

Boson samplers—set-ups that generate complex many-particle output states through the transmission of elementary many-particle input states across a multitude of mutually coupled modes—promise the efficient quantum simulation of a classically intractable computational task, and challenge the extended Church–Turing thesis, one of the fundamental dogmas of computer science. However, as in all experimental quantum simulations of truly complex systems, one crucial problem remains: how to certify that a given experimental measurement record unambiguously results from enforcing the claimed dynamics, on bosons, fermions or distinguishable particles? Here we offer a statistical solution to the certification problem, identifying an unambiguous statistical signature of many-body quantum interference upon transmission across a multimode, random scattering device. We show that statistical analysis of only partial information on the output state allows to characterise the imparted dynamics through particle type-specific features of the emerging interference patterns. The relevant statistical quantifiers are classically computable, define a falsifiable benchmark for BosonSampling, and reveal distinctive features of many-particle quantum dynamics, which go much beyond mere bunching or anti-bunching effects. (fast track communication)
Further training in the fields of radiological characterisation and clearance; Weiterbildung auf den Gebieten radiologische Charakterisierung und Freigabe

Energy Technology Data Exchange (ETDEWEB)

Bothe, M. [VKTA - Strahlenschutz, Analytik und Entsorgung Rossendorf e.V., Dresden (Germany); Feinhals, J. [DMT GmbH und Co.KG, Hamburg (Germany); Neukaeter, E. [BKW Energie AG, Muehleberg (Switzerland). KKW Muehleberg

2016-07-01

Radiological characterisation and clearance require specific knowledge and skills. Targeted further training of the staff is one possibility to get this knowledge and skills. A modular concept was established, which allows adaption to specific requests of the institution and state of knowledge and skills of participants. The modules have following focuses: ''radiological characterisation and clearance'', ''sampling'' and ''measurement and sampling plans'' and consist half-and-half of lectures and group works. In group works participants apply new knowledge to examples of the installation or simulated scenarios and afterwards they present and discuss the results. This concept was carried out for different institutions and is planned for some more.
The characterisation of precipitated magnetites

International Nuclear Information System (INIS)

Rush, D.F.; Segal, D.L.

1982-06-01

Methods are described for the preparation of magnetite by precipitation from aqueous solutions of iron(II) and iron(III) salts. The magnetites have been characterised by transmission electron microscopy, chemical analysis and X-ray diffraction. Transmission Moessbauer spectroscopy has also been used to characterise precipitated magnetites and a comparison of the spectra has been made with those obtained from nickel ferrite and hydrated ferric oxides. The hydrothermal stability of magnetite at 573 K has also been investigated. This work is relevant to corrosion processes that can occur in the water coolant circuits of nuclear reactors. (author)

Physical characterisation of particles and rheological of a heterogeneous system used in low-pressure injection moulding

International Nuclear Information System (INIS)

Zampieron, Joao Vicente

2002-01-01

The powder injection moulding process is a recent technology, which offers as advantages a high production of complex geometry metal parts, with low cost, where secondary operations of machinery are unnecessary. The main of this thesis was centered on a coarse powders feedstock injection. The process begins with the composition of the mass, that is the combination of metal powders with organic binders. The following steps succeed injection in moulds, debinding, sintering and, if necessary, cleaning. For the formulation of the feedstock it is indispensable the characterisation of the powders. This is little mentioned in the open literature and brings up controversy among authors. At first, a series of powders characterisations of AISI 316 L stainless steel (below 25 μm) was adopted. The next step was to characterise the rheological behaviour of the feedstock using different rheological apparatus, so as to find the most appropriate equipment to the low-pressure powder injection molding process. The mass has to present a favourable rheological behaviour, which is low viscosity. The results of the physical characterisation were correlated among themselves and with the rheological characterisation. This was undertaken with the purpose of finding agreement among their values. Finally, the possibility of injection of water and gas atomised stainless steel coarse powders feedstock was studied. This presents as main advantage, the reduction of costs for the process. According to the literature, only powders with size below 25 μm are possible to be injected. Hence, starting from the physical characterisation of particles and rheological characterisation of the feedstock, the formulation of an appropriate mass was found for the coarse powders. These coarse powders were characterised by particles below 45 μm. In this case it was necessary to alter drastically the feedstock composition, using high amounts of wax, which lead to unstable rheological conditions. But, it was
Design and characterisation of a pulsed neutron interrogation facility

International Nuclear Information System (INIS)

Favalli, A.; Pedersen, B.

2007-01-01

The Joint Research Centre recently obtained a license to operate a new experimental device intended for research in the field of nuclear safeguards. The research projects currently being planned for the new device includes mass determination of fissile materials in matrices and detection of contraband non-nuclear materials. The device incorporates a commercial pulsed neutron generator and a large graphite mantle surrounding the sample cavity. In this configuration, a relatively high thermal neutron flux with a long lifetime is achieved inside the sample cavity. By pulsing the neutron generator, a sample may be interrogated by a pure thermal neutron flux during repeated time periods. The paper reports on the design of the new device and the pulsed fast and thermal neutron source. The thermal neutron flux caused by the neutron generator and the graphite structure has been characterised by foil activation, fission chamber and 3 He proportional counter measurements. (authors)
Characterisation and detection of spoilage mould responsible for black spot in dry-cured fermented sausages.

Science.gov (United States)

Lozano-Ojalvo, Daniel; Rodríguez, Alicia; Cordero, Mirian; Bernáldez, Victoria; Reyes-Prieto, Mariana; Córdoba, Juan J

2015-02-01

Moulds responsible for black spot spoilage of dry-cured fermented sausages were characterised. For this purpose, samples were taken from those dry-cured fermented sausages which showed black spot alteration. Most of the mould strains were first tentatively identified as Penicillium spp. due to their morphological characteristics in different culture conditions, with one strain as Cladosporium sp. The Cladosporium strain was the only one which provoked blackening in culture media. This strain was further characterised by sequencing of ITS1-5.8S-ITS2 rRNA and β-tubulin genes. This mould strain was able to reproduce black spot formation in dry-cured fermented sausage 'salchichón' throughout the ripening process. In addition, a specific and sensitive real-time PCR method was also developed to detect Cladosporium oxysporum responsible for the black spot formation in sausages. This method could be of great interest for the meat industry to detect samples contaminated with this mould before spoilage of product avoiding economic losses for this sector.
On Nash Equilibrium and Evolutionarily Stable States That Are Not Characterised by the Folk Theorem.

Directory of Open Access Journals (Sweden)

Jiawei Li

Full Text Available In evolutionary game theory, evolutionarily stable states are characterised by the folk theorem because exact solutions to the replicator equation are difficult to obtain. It is generally assumed that the folk theorem, which is the fundamental theory for non-cooperative games, defines all Nash equilibria in infinitely repeated games. Here, we prove that Nash equilibria that are not characterised by the folk theorem do exist. By adopting specific reactive strategies, a group of players can be better off by coordinating their actions in repeated games. We call it a type-k equilibrium when a group of k players coordinate their actions and they have no incentive to deviate from their strategies simultaneously. The existence and stability of the type-k equilibrium in general games is discussed. This study shows that the sets of Nash equilibria and evolutionarily stable states have greater cardinality than classic game theory has predicted in many repeated games.
On Nash Equilibrium and Evolutionarily Stable States That Are Not Characterised by the Folk Theorem

Science.gov (United States)

Li, Jiawei; Kendall, Graham

2015-01-01

In evolutionary game theory, evolutionarily stable states are characterised by the folk theorem because exact solutions to the replicator equation are difficult to obtain. It is generally assumed that the folk theorem, which is the fundamental theory for non-cooperative games, defines all Nash equilibria in infinitely repeated games. Here, we prove that Nash equilibria that are not characterised by the folk theorem do exist. By adopting specific reactive strategies, a group of players can be better off by coordinating their actions in repeated games. We call it a type-k equilibrium when a group of k players coordinate their actions and they have no incentive to deviate from their strategies simultaneously. The existence and stability of the type-k equilibrium in general games is discussed. This study shows that the sets of Nash equilibria and evolutionarily stable states have greater cardinality than classic game theory has predicted in many repeated games. PMID:26288088
Phylogenetic characterisation of circulating, clinical influenza isolates from Bali, Indonesia: preliminary report from the BaliMEI project.

Science.gov (United States)

Adisasmito, W; Budayanti, S N; Aisyah, D N; Gallo Cassarino, T; Rudge, J W; Watson, S J; Kozlakidis, Z; Smith, G J D; Coker, R

2017-08-23

Human influenza represents a major public health concern, especially in south-east Asia where the risk of emergence and spread of novel influenza viruses is particularly high. The BaliMEI study aims to conduct a five year active surveillance and characterisation of influenza viruses in Bali using an extensive network of participating healthcare facilities. Samples were collected during routine diagnostic treatment in healthcare facilities. In addition to standard clinical and molecular methods for influenza typing, next generation sequencing and subsequent de novo genome assembly were performed to investigate the phylogeny of the collected patient samples. The samples collected are characteristic of the seasonally circulating influenza viruses with indications of phylogenetic links to other samples characterised in neighbouring countries during the same time period. There were some strong phylogenetic links with sequences from samples collected in geographically proximal regions, with some of the samples from the same time-period resulting to small clusters at the tree-end points. However this work, which is the first of its kind completely performed within Indonesia, supports the view that the circulating seasonal influenza in Bali reflects the strains circulating in geographically neighbouring areas as would be expected to occur within a busy regional transit centre.
Lipid and liver abnormalities in haemoglobin A1c-defined prediabetes and type 2 diabetes.

Science.gov (United States)

Calanna, S; Scicali, R; Di Pino, A; Knop, F K; Piro, S; Rabuazzo, A M; Purrello, F

2014-06-01

We aimed to investigate lipid abnormalities and liver steatosis in patients with HbA1c-defined prediabetes and type 2 diabetes compared to individuals with HbA1c-defined normoglycaemia. Ninety-one subjects with prediabetes according to HbA1c, i.e. from 5.7 to 6.4% (39-46 mmol/mol), 50 newly diagnosed patients with HbA1c-defined type 2 diabetes (HbA1c ≥6.5% [≥48 mmol/mol]), and 67 controls with HbA1c lower than 5.7% (prediabetes were characterised by: lower apolipoprotein AI and HDL cholesterol levels, higher blood pressure, triglycerides levels and apolipoprotein B/apolipoprotein AI ratio, higher FLI, increased prevalence of and more severe hepatic steatosis, similar BARD score, and higher total body fat mass. In comparison to subjects with diabetes, subjects with prediabetes exhibited: similar blood pressure and apolipoprotein B/apolipoprotein AI ratio, similar FLI, reduced prevalence of and less severe hepatic steatosis, lower BARD score, increased percent fat and lower total body muscle mass. In comparison to controls, subjects with diabetes showed: lower apolipoprotein AI and HDL cholesterol levels, higher blood pressure and triglycerides levels, higher FLI, increased prevalence of and more severe hepatic steatosis, higher BARD score, and higher total body muscle mass. Moreover, HbA1c was correlated with BMI, HOMA-IR, triglycerides, HDL cholesterol, AST, and ALT. Subjects with HbA1c-defined prediabetes and type 2 diabetes, respectively, are characterised by abnormalities in lipid profile and liver steatosis, thus exhibiting a severe risk profile for cardiovascular and liver diseases. Copyright © 2014 Elsevier B.V. All rights reserved.
Database characterisation of HEP applications

International Nuclear Information System (INIS)

Piorkowski, Mariusz; Grancher, Eric; Topurov, Anton

2012-01-01

Oracle-based database applications underpin many key aspects of operations for both the LHC accelerator and the LHC experiments. In addition to the overall performance, the predictability of the response is a key requirement to ensure smooth operations and delivering predictability requires understanding the applications from the ground up. Fortunately, database management systems provide several tools to check, measure, analyse and gather useful information. We present our experiences characterising the performance of several typical HEP database applications performance characterisations that were used to deliver improved predictability and scalability as well as for optimising the hardware platform choice as we migrated to new hardware and Oracle 11g.
A systematic planning tool for environmental characterisation - 16010

International Nuclear Information System (INIS)

Wilcox, Steven; Wilkins, Richard; Lyons, Martin

2009-01-01

Many organisations are currently dealing with long standing legacy issues in clean up, decommissioning and demolition projects. Industry is required to ensure that all bulk articles, substances and waste arisings are adequately characterised and assigned to the correct disposal routes in compliance with UK legislation and best practice. It is essential that data used to support waste sentencing is of the correct type, quality and quantity, and that it is appropriately assessed in order to support defensible, confident decisions that account for inherent uncertainties. AMEC has adopted the Data Quality Objectives (DQO) based methodology and the software package Visual Sample Plan (VSP) to provide a better, faster, and more cost effective approach to meeting regulatory and client requirements, whilst minimising the time spent gathering data and assessing the information. The DQO methodology is based on a scientific approach that requires clear objectives to be established from the outset of a project and that there is a demonstration of acceptability of the results. Through systematic planning, the team develops acceptance or performance criteria for the quality of the data collected and for the confidence in the final decision. The systematic planning process promotes communication between all departments and individuals involved in the decision-making process thus the planning phase gives an open and unambiguous method to support the decisions and enables the decision-makers (technical authorities on the materials of concern) to document all assumptions. The DQO process allows better planning, control and understanding of all the issues. All types of waste can be sentenced under one controllable system providing a more defensible position. This paper will explain that the DQO process consists of seven main steps that lead to a detailed Sampling and Analysis Plan (SAP). The process gives transparency to any assumptions made about the site or material being
Characterising antimicrobial protein-membrane complexes

International Nuclear Information System (INIS)

Xun, Gloria; Dingley, Andrew; Tremouilhac, Pierre

2009-01-01

Full text: Antimicrobial proteins (AMPs) are host defence molecules that protect organisms from microbial infection. A number of hypotheses for AMP activity have been proposed which involve protein membrane interactions. However, there is a paucity of information describing AMP-membrane complexes in detail. The aim of this project is to characterise the interactions of amoebapore-A (APA-1) with membrane models using primarily solution-state NMR spectroscopy. APA-1 is an AMP which is regulated by a pH-dependent dimerisation event. Based on the atomic resolution solution structure of monomeric APA-1, it is proposed that this dimerisation is a prerequisite for ring-like hexameric pore formation. Due to the cytotoxicity of APA-1, we have developed a cell-free system to produce this protein. To facilitate our studies, we have adapted the cell-free system to isotope label APA-1. 13 C /15 N -enriched APA-1 sample was achieved and we have begun characterising APA-1 dimerisation and membrane interactions using NMR spectroscopy and other biochemical/biophysical methods. Neutron reflectometry is a surface-sensitive technique and therefore represents an ideal technique to probe how APA-1 interacts with membranes at the molecular level under different physiological conditions. Using Platypus, the pH-induced APA-1-membrane interactions should be detectable as an increase of the amount of protein adsorbed at the membrane surface and changes in the membrane properties. Specifically, detailed information of the structure and dimensions of the protein-membrane complex, the position and amount of the protein in the membrane, and the perturbation of the membrane phospholipids on protein incorporation can be extracted from the neutron reflectometry measurement. Such information will enable critical assessment of current proposed mechanisms of AMP activity in bacterial membranes and complement our NMR studies
Stratified Sampling to Define Levels of Petrographic Variation in Coal Beds: Examples from Indonesia and New Zealand

Directory of Open Access Journals (Sweden)

Tim A. Moore

2016-01-01

Full Text Available DOI: 10.17014/ijog.3.1.29-51Stratified sampling of coal seams for petrographic analysis using block samples is a viable alternative to standard methods of channel sampling and particulate pellet mounts. Although petrographic analysis of particulate pellets is employed widely, it is both time consuming and does not allow variation within sampling units to be assessed - an important measure in any study whether it be for paleoenvironmental reconstruction or in obtaining estimates of industrial attributes. Also, samples taken as intact blocks provide additional information, such as texture and botanical affinity that cannot be gained using particulate pellets. Stratified sampling can be employed both on ‘fine’ and ‘coarse’ grained coal units. Fine-grained coals are defined as those coal intervals that do not contain vitrain bands greater than approximately 1 mm in thickness (as measured perpendicular to bedding. In fine-grained coal seams, a reasonable sized block sample (with a polished surface area of ~3 cm2 can be taken that encapsulates the macroscopic variability. However, for coarse-grained coals (vitrain bands >1 mm a different system has to be employed in order to accurately account for the larger particles. Macroscopic point counting of vitrain bands can accurately account for those particles>1 mm within a coal interval. This point counting method is conducted using something as simple as string on a coal face with marked intervals greater than the largest particle expected to be encountered (although new technologies are being developed to capture this type of information digitally. Comparative analyses of particulate pellets and blocks on the same interval show less than 6% variation between the two sample types when blocks are recalculated to include macroscopic counts of vitrain. Therefore even in coarse-grained coals, stratified sampling can be used effectively and representatively.
Characterisation of representative building typologies for social housing projects in Brazil and its energy performance

International Nuclear Information System (INIS)

Triana, Maria Andrea; Lamberts, Roberto; Sassi, Paola

2015-01-01

In Brazil the housing deficit is around 5.5 million houses. To address this need, the government created a programme called “My house, My life”. The main subsidies of the programme are for families earning up to three times the minimum wage. In order to formulate strategies for more energy efficiency buildings, it is necessary to understand the thermal and energy performance of what is being built. This article defines representative projects for typologies being built in the Brazilian social housing sector through the analysis of 108 projects considering two groups of income levels and investigates the thermal and energy performance of the representative projects in relation to the Regulation for Energy Efficiency Labelling of Residential Buildings in Brazil for two bioclimatic zones. Five representative building models were defined. Considering the most common features found on the sample, the study suggests the importance of addresing energy efficiency measures on the sector since current building techniques for social housing shows a tendency towards a low performance in relation to the thermal and energy performance criteria of the Energy Labelling especially for lower income projects. This provides a basis for future policy and allows for more in depth studies within the sector. - Highlights: • Characterisation of representative typologies built for social housing in Brazil. • More recurrent building physics characteristics considered. • Energy efficiency and thermal performance of Brazilian social housing analysed. • Regulation for Energy Efficiency Labelling of Residential Buildings in Brazil used for analysis.
Potential of fluorescence spectroscopy for the characterisation of maple syrup flavours.

Science.gov (United States)

Panneton, Bernard; Clément, Alain; Lagacé, Luc

2013-10-01

Maple syrup has high maket value. It is produced in North East America from the heat-evaporated sap of Acer saccharum Marshall. For marketing purposes, there is interest in defining its flavour profile in a consistent and repeatable manner. An experiment was undertaken to explore the potential of autofluorescence of maple syrup induced at 275 and 360 nm to characterise flavours. A mixed data factor analysis revealed two independent groups of variables. One represents early season woody and late season empyreumatic flavours. The other is related to off-flavour, confectionery and maple flavours. Maple and confectionery flavours are subtle, difficult to distinguish and opposed to off-flavour. There were clear relationships among the two groups and fluorescence profiles. For each of the five basic flavours, discriminant models based on partial least squares regressions were developed. For each sample of syrup, flavours combined to form flavour profiles, and the results from the five discriminant models were aggregated to reproduce these profiles. For excitation at 275 nm, the woody/off-flavour and confectionery/empyreumatic/maple flavour profiles were classified correctly 86 and 78% of the time (cross-validation) respectively. Induced autofluorescence spectra were shown to contain information related to maple syrup flavours. This fluorescence-flavour relationship is not considered quantitative yet, and further research avenues are proposed. © 2013 Society of Chemical Industry.
Spectral Characterization of H2020/PTAL Mineral Samples: Implications for In Situ Martian Exploration and Mars Sample Selection

Science.gov (United States)

Lantz, C.; Pilorget, C.; Poulet, F.; Riu, L.; Dypvik, H.; Hellevang, H.; Rull Perez, F.; Veneranda, M.; Cousin, A.; Viennet, J.-C.; Werner, S. C.

2018-04-01

We present combined analysis performed in the framework of the Planetary Terrestrial Analogues Library (H2020 project). XRD, NIR, Raman, and LIBS spectroscopies are used to characterise samples to prepare ExoMars/ESA and Mars2020/NASA observations.
Complementary techniques for solid oxide cell characterisation on micro- and nano-scale

International Nuclear Information System (INIS)

Wiedenmann, D.; Hauch, A.; Grobety, B.; Mogensen, M.; Vogt, U.

2009-01-01

High temperature steam electrolysis by solid oxide electrolysis cells (SOEC) is a way with great potential to transform clean and renewable energy from non-fossil sources to synthetic fuels such as hydrogen, methane or dimethyl ether, which have been identified as promising alternative energy carriers. Also, as SOEC can operate in the reverse mode as solid oxide fuel cells (SOFC), during high peak hours e.g. hydrogen can be used in a very efficient way to reconvert chemically stored energy into electrical energy. As solid oxide cells (SOC) are working at high temperatures (700-900 o C), material degradation and evaporation can occur e.g. from the cell sealing material, leading to poisoning effects and aging mechanisms which are decreasing the cell efficiency and long-term durability. In order to investigate such cell degradation processes, thorough examination on SOC often requires the chemical and structural characterisation on the microscopic and the nanoscopic level. The combination of different microscope techniques like conventional scanning electron microscopy (SEM), electron-probe microanalysis (EPMA) and the focused ion-beam (FIB) preparation technique for transmission electron microscopy (TEM) allows performing post mortem analysis on a multi scale level of cells after testing. These complementary techniques can be used to characterize structural and chemical changes over a large and representative sample area (micro-scale) on the one hand, and also on the nano-scale level for selected sample details on the other hand. This article presents a methodical approach for the structural and chemical characterisation of changes in aged cathode-supported electrolysis cells produced at Riso DTU, Denmark. Also, results from the characterisation of impurities at the electrolyte/hydrogen interface caused by evaporation from sealing material are discussed. (author)
Site-Wide Integrated Water Monitoring - Defining and Implementing Sampling Objectives to Support Site Closure - 13060

International Nuclear Information System (INIS)

Wilborn, Bill; Knapp, Kathryn; Farnham, Irene; Marutzky, Sam

2013-01-01

The Underground Test Area (UGTA) activity is responsible for assessing and evaluating the effects of the underground nuclear weapons tests on groundwater at the Nevada National Security Site (NNSS), formerly the Nevada Test Site (NTS), and implementing a corrective action closure strategy. The UGTA strategy is based on a combination of characterization, modeling studies, monitoring, and institutional controls (i.e., monitored natural attenuation). The closure strategy verifies through appropriate monitoring activities that contaminants of concern do not exceed the SDWA at the regulatory boundary and that adequate institutional controls are established and administered to ensure protection of the public. Other programs conducted at the NNSS supporting the environmental mission include the Routine Radiological Environmental Monitoring Program (RREMP), Waste Management, and the Infrastructure Program. Given the current programmatic and operational demands for various water-monitoring activities at the same locations, and the ever-increasing resource challenges, cooperative and collaborative approaches to conducting the work are necessary. For this reason, an integrated sampling plan is being developed by the UGTA activity to define sampling and analysis objectives, reduce duplication, eliminate unnecessary activities, and minimize costs. The sampling plan will ensure the right data sets are developed to support closure and efficient transition to long-term monitoring. The plan will include an integrated reporting mechanism for communicating results and integrating process improvements within the UGTA activity as well as between other U.S. Department of Energy (DOE) Programs. (authors)
Characterisation of neutron beam and gamma spectrometer for PGAA

International Nuclear Information System (INIS)

Revay, Zs.; Molnar, G.L.

2001-01-01

In the second project year great efforts have been devoted in Budapest to the development of methods and procedures for neutron beam characterisation and spectrometer calibration. These are described here to provide recipes for other laboratories. Some illustrative results obtained on the former thermal guide, and partly on the new cold neutron guide are also given. Preliminary results from the benchmark experiments on flux monitors titanium standard and an unknown sample are also reported. New k o factors for elements of highest priority will be measured on the cold beam only in the near future. (author)
Characterisation of Cassava Bagasse and Composites Prepared by Blending with Low-Density Polyethylene

Directory of Open Access Journals (Sweden)

Fabiane Oliveira Farias

2014-12-01

Full Text Available The main objective of this study was to characterise the cassava bagasse and to evaluate its addition in composites. Two cassava bagasse samples were characterised using physicochemical, thermal and microscopic techniques, and by obtaining their spectra in the mid-infrared region and analysing them by using x-ray diffraction. Utilising sorption isotherms, it was possible to establish the acceptable conditions of temperature and relative humidity for the storage of the cassava bagasse. The incorporation of cassava bagasse in a low-density polyethylene (LDP matrix was positive, increasing the elasticity modulus values from 131.90 for LDP to 186.2 for 70% LDP with 30% SP bagasse. These results were encouraging because cassava bagasse could serve as a structural reinforcement, as well as having environmental advantages for its application in packaging, construction and automotive parts.
Characterisation of varnishes used in violins by pyrolysis-gas chromatography/mass spectrometry.

Science.gov (United States)

Chiavari, Giuseppe; Montalbani, Simona; Otero, Vanessa

2008-12-01

The correct characterisation and a detailed knowledge of the materials originally used in violin varnishes, like natural resins, is crucial for the conservation in museums and for a suitable restoration technique. The study presented here reports on the potential of pyrolysis (Py) coupled with gas chromatography (GC) and mass spectrometry (MS) for the identification of chemical markers of each resin; this technique is very sensitive and selective, it needs a small quantity of sample and does not require chemical treatments. To improve the chromatographic behaviour of polar compounds the derivatising agent tetramethylammonium hydroxide (TMAH) in combination with pyrolysis has been used, in the so-called TMAH thermochemolysis or thermally assisted hydrolysis and methylation (THM), or more simply pyrolysis-methylation. The natural resins studied were colophony, sandarac, manila copal, elemi, amber and benzoin, mainly composed of terpenic compounds, with the exception of the latter, composed of aromatic compounds. Many compounds were identified; in particular, methyl esters of resinous acids that, individually or in a group, can be used as chemical markers. However, through this technique it was not possible to distinguish between the sandarac and manila copal resins because their chromatographic behaviour is very similar. Finally, the procedure applied has been employed in the characterisation of original varnish samples.
Bruxism defined and graded: an international consensus.

Science.gov (United States)

Lobbezoo, F; Ahlberg, J; Glaros, A G; Kato, T; Koyano, K; Lavigne, G J; de Leeuw, R; Manfredini, D; Svensson, P; Winocur, E

2013-01-01

To date, there is no consensus about the definition and diagnostic grading of bruxism. A written consensus discussion was held among an international group of bruxism experts as to formulate a definition of bruxism and to suggest a grading system for its operationalisation. The expert group defined bruxism as a repetitive jaw-muscle activity characterised by clenching or grinding of the teeth and/or by bracing or thrusting of the mandible. Bruxism has two distinct circadian manifestations: it can occur during sleep (indicated as sleep bruxism) or during wakefulness (indicated as awake bruxism). For the operationalisation of this definition, the expert group proposes a diagnostic grading system of 'possible', 'probable' and 'definite' sleep or awake bruxism. The proposed definition and grading system are suggested for clinical and research purposes in all relevant dental and medical domains. © 2012 Blackwell Publishing Ltd.

First characterisation of natural radioactivity in building materials manufactured in Albania

International Nuclear Information System (INIS)

Xhixha, G.; Ahmeti, A.; Bezzon, G. P.; Bitri, M.; Broggini, C.; Buso, G. P.; Caciolli, A.; Callegari, I.; Cfarku, F.; Colonna, T.; Fiorentini, G.; Guastaldi, E.; Mantovani, F.; Massa, G.; Menegazzo, R.; Mou, L.; Prifti, D.; Rossi Alvarez, C.; Kuqi, D. S.; Shyti, M.; Tushe, L.; Xhixha Kaceli, M.; Zyfi, A.

2013-01-01

This study focuses on the radiological characterisation of building materials manufactured in Albania by using a high resolution gamma-ray spectrometer. The average activity concentrations of 40 K , 226 Ra and 232 Th were, respectively, 644.1±64.2, 33.4 ± 6.4 and 42.2 ± 7.6 Bq kg -1 in the clay brick samples and 179.7 ± 48.9, 55.0 ± 5.8 and 17.0 ± 3.3 Bq kg -1 in the cement samples. The calculated activity concentration index (ACI), varied from 0.48±0.02 to 0.63±0.04 in the clay brick samples and from 0.29±0.03 to 0.37±0.02 in the cement samples. Based on the ACI, all of the clay brick and cement samples were categorised as A1 materials. The authors can exclude (at 3s level) any restriction of their use as bulk materials. (authors)
First characterisation of natural radioactivity in building materials manufactured in Albania.

Science.gov (United States)

Xhixha, G; Ahmeti, A; Bezzon, G P; Bitri, M; Broggini, C; Buso, G P; Caciolli, A; Callegari, I; Cfarku, F; Colonna, T; Fiorentini, G; Guastaldi, E; Mantovani, F; Massa, G; Menegazzo, R; Mou, L; Prifti, D; Rossi Alvarez, C; Sadiraj Kuqi, Dh; Shyti, M; Tushe, L; Xhixha Kaçeli, M; Zyfi, A

2013-07-01

This study focuses on the radiological characterisation of building materials manufactured in Albania by using a high-resolution gamma-ray spectrometer. The average activity concentrations of (40)K, (226)Ra and (232)Th were, respectively, 644.1±64.2, 33.4 ± 6.4 and 42.2 ± 7.6 Bq kg(-1) in the clay brick samples and 179.7 ± 48.9, 55.0 ± 5.8 and 17.0 ± 3.3 Bq kg(-1) in the cement samples. The calculated activity concentration index (ACI), varied from 0.48±0.02 to 0.63±0.04 in the clay brick samples and from 0.29±0.03 to 0.37±0.02 in the cement samples. Based on the ACI, all of the clay brick and cement samples were categorised as A1 materials. The authors can exclude (at 3σ level) any restriction of their use as bulk materials.
Image analysis for material characterisation

Science.gov (United States)

Livens, Stefan

In this thesis, a number of image analysis methods are presented as solutions to two applications concerning the characterisation of materials. Firstly, we deal with the characterisation of corrosion images, which is handled using a multiscale texture analysis method based on wavelets. We propose a feature transformation that deals with the problem of rotation invariance. Classification is performed with a Learning Vector Quantisation neural network and with combination of outputs. In an experiment, 86,2% of the images showing either pit formation or cracking, are correctly classified. Secondly, we develop an automatic system for the characterisation of silver halide microcrystals. These are flat crystals with a triangular or hexagonal base and a thickness in the 100 to 200 nm range. A light microscope is used to image them. A novel segmentation method is proposed, which allows to separate agglomerated crystals. For the measurement of shape, the ratio between the largest and the smallest radius yields the best results. The thickness measurement is based on the interference colours that appear for light reflected at the crystals. The mean colour of different thickness populations is determined, from which a calibration curve is derived. With this, the thickness of new populations can be determined accurately.
A novel method for the quantification, characterisation and speciation of silver nanoparticles in earthworms exposed in soil

NARCIS (Netherlands)

Makama, S.I.; Peters, R.J.B.; Undas, A.K.; Brink, van den N.W.

2015-01-01

Currently, metal engineered nanoparticles (ENPs) in tissues are generally quantified based on total concentrations after acid digestion of samples. Electron microscopy has also been used for non-quantitative characterisation of NPs in situ, and can be enhanced with tissue-processing methods that can
Characterisation of Ferrosilicon Dense Medium Separation Material

International Nuclear Information System (INIS)

Waanders, F. B.; Mans, A.

2003-01-01

Ferrosilicon is used in the dense medium separation of iron ore at Kumba resources, Sishen, South Africa. Due to high cost and losses that occur during use, maximum recovery by means of magnetic separation is aimed for. The purpose of this project was to determine the characteristics of the unused Fe-Si and then to characterise the changes that occur during storage and use thereof. Scanning electron microscopy was used to determine the composition of each sample, whilst Moessbauer spectroscopy yielded a two-sextet spectrum with hyperfine magnetic field strengths of 20 and 31 T, respectively, for the fresh samples. Additional hematite oxide peaks appeared in the Moessbauer spectra after use of the Fe-Si over a length of time, but this did not result in a dramatic degradation of the medium. No definite changes occurred during correct storage methods. It was, however, found that the biggest loss of Fe-Si was due to the abrasion of the particles, which resulted in the formation of an oxihydroxide froth, during the process.
Spectroscopic characterisation of an atmospheric pressure glow discharge

International Nuclear Information System (INIS)

Gomez, S.; Steen, P.G.; Morrow, T.; Graham, W.G.

2001-01-01

Recently there has been considerable interest in atmospheric discharges operating in a glow discharge mode i.e. with a spatial and sheath structure similar to that of low pressure glow discharges. Here spectroscopy has been used to characterise an atmospheric pressure glow discharge (APGD), operating with either dry air, argon or helium gas flowing through the inter-electrode space and with the inter-electrode gap either free or with woven polypropylene or polyester samples present. Emission spectroscopy is used to determine the rotational and vibrational temperature of the nitrogen gas, while electron temperatures are determined from the relative intensities of Ar emission lines. Ozone production is monitored by a simple absorption technique to evaluate its potential in process control
Modelling, fabrication and characterisation of THz fractal meta-materials

DEFF Research Database (Denmark)

Xiao, S.; Zhou, L.; Malureanu, Radu

2011-01-01

We present theoretical predictions, fabrication procedure and characterisation results of fractal metamaterials for the THz frequency range. The characterisation results match well the predicted response thus validating both the fabrication procedure as well as the simulation one. Such systems sh...
Two-phase flow characterisation by nuclear magnetic resonance

International Nuclear Information System (INIS)

Leblond, J.; Javelot, S.; Lebrun, D.; Lebon, L.

1998-01-01

The results presented in this paper demonstrate the performance of the PFGSE-NMR to obtain a complete characterisation of two-phase flows. Different methods are proposed to characterise air-water flows in different regimes: stationary two-phase flows and flows in transient condition. Finally a modified PFGSE is proposed to analyse the turbulence of air-water bubbly flow. (author)
Characterisation of Dissolved Organic Carbon by Thermal Desorption - Proton Transfer Reaction - Mass Spectrometry

Science.gov (United States)

Materić, Dušan; Peacock, Mike; Kent, Matthew; Cook, Sarah; Gauci, Vincent; Röckmann, Thomas; Holzinger, Rupert

2017-04-01

Dissolved organic carbon (DOC) is an integral component of the global carbon cycle. DOC represents an important terrestrial carbon loss as it is broken down both biologically and photochemically, resulting in the release of carbon dioxide (CO2) to the atmosphere. The magnitude of this carbon loss can be affected by land management (e.g. drainage). Furthermore, DOC affects autotrophic and heterotrophic processes in aquatic ecosystems, and, when chlorinated during water treatment, can lead to the release of harmful trihalomethanes. Numerous methods have been used to characterise DOC. The most accessible of these use absorbance and fluorescence properties to make inferences about chemical composition, whilst high-performance size exclusion chromatography can be used to determine apparent molecular weight. XAD fractionation has been extensively used to separate out hydrophilic and hydrophobic components. Thermochemolysis or pyrolysis Gas Chromatography - Mass Spectrometry (GC-MS) give information on molecular properties of DOC, and 13C NMR spectroscopy can provide an insight into the degree of aromaticity. Proton Transfer Reaction - Mass Spectrometry (PTR-MS) is a sensitive, soft ionisation method suitable for qualitative and quantitative analysis of volatile and semi-volatile organic vapours. So far, PTR-MS has been used in various environmental applications such as real-time monitoring of volatile organic compounds (VOCs) emitted from natural and anthropogenic sources, chemical composition measurements of aerosols etc. However, as the method is not compatible with water, it has not been used for analysis of organic traces present in natural water samples. The aim of this work was to develop a method based on thermal desorption PTR-MS to analyse water samples in order to characterise chemical composition of dissolved organic carbon. We developed a clean low-pressure evaporation/sublimation system to remove water from samples and thermal desorption system to introduce
Data for in-depth characterisation of the lamb meat proteome from longissimus lumborum

Directory of Open Access Journals (Sweden)

Tzer-Yang Yu

2015-06-01

Full Text Available This Data article provides Supplementary data related to the research article titled “In-depth characterisation of the lamb meat proteome from longissimus lumborum” by Yu et al. [1]. This research article reports the proteome catalogue of the 48 h post-mortem lamb longissimus lumborum. A list of 388 ovine-specific proteins were identified and characterised after separating the samples into sarcoplasmic, myofibrillar and insoluble fractions, followed by an in-depth shotgun proteomic evaluation and bioinformatic analysis. The detailed list of identified proteins, the annotated MS/MS spectra corresponding to the proteins identified by a single peptide-spectrum match, the raw Gene Ontology annotation data and other miscellaneous files, as will be described below, were contained in this Data article. We hope the data presented here will contribute to the current knowledge of the global protein composition of lamb skeletal muscle/meat.
Physico-chemical characterisation of Indian biomass ashes

Energy Technology Data Exchange (ETDEWEB)

K. Umamaheswaran; Vidya S. Batra [Energy and Resources Institute (TERI), New Delhi (India)

2008-05-15

India stands fourth in biomass utilisation for various purposes like domestic, commercial and industrial applications. While extensive studies have been made for coal ash characterisation and utilisation, studies on characterisation of biomass ash and its utilisation has not been addressed. In this paper, biomass ash from five sources i.e. rice husk, bagasse, groundnut shell, cashewnut shell, and arecanut shell have been characterised. Chemical composition analysis, particle size analysis, thermal analysis, and microstructure analysis were carried out. Results show that in all ashes silica is the major compound with particle size ranging from 15 to 30 {mu}m and having irregular shape. Ash powders originating from cashewnut shell, arecanut shell and groundnut shell also have compounds of calcium, magnesium and potassium. Bagasse and cashewnut shell ashes have high LOI due to presence of unburnt carbon, P{sub 2}O{sub 5} and other volatiles. 16 refs., 22 figs., 3 tabs.
Radiological characterisation and radon equilibrium factor in the outdoor air of a post-industrial urban area

International Nuclear Information System (INIS)

Rozas, S.; Idoeta, R.; Alegría, N.; Herranz, M.

2016-01-01

The radiological characterisation of outdoor air is always a complicated task due to the several radioactive emissions coming from the different radionuclides and also because of the very short half-lives of radionuclides in the natural radioactive series. In some places, this characterisation could result in unusual values because the natural presence of radionuclides with terrestrial origin can be modified by manmade activities. Nonetheless, this characterisation is useful not only for air quality control purposes but also because radon and its progeny in the outdoor air are the main contributors to human exposure from natural sources. In this study, we have carried out air particle sampling, followed by gamma-ray spectrometry, alpha spectrometry and beta counting determinations for this purpose. Subsequently, the outdoor air has been radiologically characterised through the obtained data and using a pre-existing analytical method to take into account the radioactive decays of short half-life radionuclides during sampling, sample preparation and measuring times. Bilbao was chosen to carry out this work. It is a medium-sized town located in northern Spain, close to the Atlantic Ocean and at sea level. This city has a recent industrial past as there were numerous steel mills and other heavy industries, including some quarries, and some open pit mines close to it, which concluded in a remediation program. So, it is a place where the air is potentially modified by manmade activities. The obtained results show that activity concentration values for long-lived radionuclides that precede radon and thoron are in the order of 10 −6 Bq m −3 and long-lived ones after radon are around 10 −4 Bq m −3 . Thoron progeny are around 2 × 10 −2 Bq m −3 and radon progeny are around 1.8 Bq m −3 . The mean radon equilibrium factor was 0.18. All of these values are close to the minimum UNSCEAR values, but show some variability, which highlights the importance
Current limitations and challenges in nanowaste detection, characterisation and monitoring.

Science.gov (United States)

Part, Florian; Zecha, Gudrun; Causon, Tim; Sinner, Eva-Kathrin; Huber-Humer, Marion

2015-09-01

Engineered nanomaterials (ENMs) are already extensively used in diverse consumer products. Along the life cycle of a nano-enabled product, ENMs can be released and subsequently accumulate in the environment. Material flow models also indicate that a variety of ENMs may accumulate in waste streams. Therefore, a new type of waste, so-called nanowaste, is generated when end-of-life ENMs and nano-enabled products are disposed of. In terms of the precautionary principle, environmental monitoring of end-of-life ENMs is crucial to allow assessment of the potential impact of nanowaste on our ecosystem. Trace analysis and quantification of nanoparticulate species is very challenging because of the variety of ENM types that are used in products and low concentrations of nanowaste expected in complex environmental media. In the framework of this paper, challenges in nanowaste characterisation and appropriate analytical techniques which can be applied to nanowaste analysis are summarised. Recent case studies focussing on the characterisation of ENMs in waste streams are discussed. Most studies aim to investigate the fate of nanowaste during incineration, particularly considering aerosol measurements; whereas, detailed studies focusing on the potential release of nanowaste during waste recycling processes are currently not available. In terms of suitable analytical methods, separation techniques coupled to spectrometry-based methods are promising tools to detect nanowaste and determine particle size distribution in liquid waste samples. Standardised leaching protocols can be applied to generate soluble fractions stemming from solid wastes, while micro- and ultrafiltration can be used to enrich nanoparticulate species. Imaging techniques combined with X-ray-based methods are powerful tools for determining particle size, morphology and screening elemental composition. However, quantification of nanowaste is currently hampered due to the problem to differentiate engineered from
Characterisation of mouse prothymocytes

NARCIS (Netherlands)

W.J.A. Boersma (Wim)

1982-01-01

textabstractIn this thesis, the study of growth kinetics of thymocytes in lethally irradiated mice as a means to characterise the early T-cell progenitors is described. Normal bone marrow cells were used as the source of hemopoietic cells. The experiments show that it is possible to obtain
Characterisation of the ecotoxicity of hospital effluents: A review

International Nuclear Information System (INIS)

Orias, Frédéric; Perrodin, Yves

2013-01-01

The multiple activities that take place in hospitals (surgery, drug treatments, radiology, cleaning of premises and linen, chemical and biological analysis laboratories, etc.), are a major source of pollutant emissions into the environment (disinfectants, detergents, drug residues, etc.). Most of these pollutants can be found in hospital effluents (HWW), then in urban sewer networks and WWTP (weakly adapted for their treatment) and finally in aquatic environments. In view to evaluating the impact of these pollutants on aquatic ecosystems, it is necessary to characterise their ecotoxicity. Several reviews have focused on the quantitative and qualitative characterisation of pollutants present in HWW. However, none have focused specifically on the characterisation of their experimental ecotoxicity. We have evaluated this according to two complementary approaches: (i) a “substance” approach based on the identification of the experimental data in the literature for different substances found in hospital effluents, and on the calculation of their PNEC (Predicted Non Effect Concentration), (ii) a “matrix” approach for which we have synthesised ecotoxicity data obtained from the hospital effluents directly. This work first highlights the diversity of the substances present within hospital effluents, and the very high ecotoxicity of some of them (minimum PNEC observed close to 0,01 pg/L). We also observed that the consumption of drugs in hospitals was a predominant factor chosen by authors to prioritise the compounds to be sought. Other criteria such as biodegradability, excretion rate and the bioaccumulability of pollutants are considered, though more rarely. Studies of the ecotoxicity of the particulate phase of effluents must also be taken into account. It is also necessary to monitor the effluents of each of the specialised departments of the hospital studied. These steps is necessary to define realistic environmental management policies for hospitals
Baseline geochemical characterisation of a vulnerable tropical karstic aquifer; Lifou, New Caledonia

Directory of Open Access Journals (Sweden)

Eric Nicolini

2016-03-01

Full Text Available Study region: Lifou Island, near the main island of New Caledonia. Study focus: Stable oxygen and hydrogen isotopes of groundwater and rainfall were used to characterise baseline values for the main fresh water aquifer of Lifou Island and describe its recharge. Other stable isotope parameters (nitrates and DIC were used to investigate the interaction between surface water (rainfall and groundwater, including anthropogenic effects from human activities. New hydrological insights for the region: This study represents the first baseline isotopic characterisation of Lifou Island’s groundwater aquifer composition and provides a reference for future investigative studies on groundwater quality and security. Groundwater sampled in June and October 2012 had nearly identical isotopic composition. Tap water sampled monthly between February 2012 and January 2014 also had a constant isotopic composition similar to the groundwater. Groundwater recharge was found to occur when monthly precipitation exceeded 140 mm, with the recharge cycle representing 20–30% of the annual rainfall. Relationships between HCO32− content, pH, soil δ13C DIC and satellite photo interpretation suggests a variance of soil pCO2, which is explained by different vegetation cover and higher water use efficiencies in forested areas (high pCO2, more negative δ13C isotope values. The δ15NNO3 values for most groundwater indicate they are uncontaminated with anthropogenic nitrates, although some samples taken in October (dry season showed a slight denitrification, possibly of natural origin. Keywords: Reef islands, Precipitation, Karstic aquifer, Hydrogeology, Stable isotopes, Nitrates
Characterising exoplanet atmospheres as part of the LRG-BEASTS survey

Science.gov (United States)

Kirk, James; Wheatley, Peter; LRG-BEASTS Collaboration

2018-01-01

I will present the latest results from the Low Resolution Ground-Based Exoplanet Atmosphere Survey using Transmission Spectroscopy (LRG-BEASTS, ‘large beasts’). This programme has demonstrated the capabilities of 4-metre class telescopes to produce transmission spectra with precision comparable to HST and 8- and 10-metre class telescopes. LRG-BEASTS has so far revealed a Rayleigh scattering haze in the atmosphere of HAT-P-18b, clouds in the atmosphere of WASP-52b, and ruled out a previously claimed detection of potassium in the atmosphere of WASP-80b. Studies of hot Jupiter atmospheres have revealed a startling diversity between systems, with many showing thick clouds and hazes which mask pressure-broadened absorption features. In the small sample of studied planets to date, no strong correlation has emerged between key planetary parameters and the presence, or absence, of clouds and hazes, although there has been a suggestion that temperature might play a role. In order to characterise this diversity and unravel the underlying physical processes, it is essential that we expand the current sample of studied planets. This is the focus of LRG-BEASTS and my dissertation. Clouds and hazes are not just prominent in giant planet atmospheres but also in the handful of smaller planets characterised in transmission. The knowledge and expertise we will gain from the study of giant planets with surveys such as LRG-BEASTS will inform our understanding of analogous processes in the exciting new generation of planets that will be discovered with TESS.
Characterisation of advanced windows. Determination of thermal properties by measurements

Energy Technology Data Exchange (ETDEWEB)

Duer, K.

2001-04-01

identified and (to a certain extend) solved. Procedures for performing the measurements in the METSET have been developed. As the measurements are carried out under conditions different from the defined reference conditions a number of corrections of the measured results must be applied. Procedures for these corrections have been developed and demonstrated. Especially the corrections for differences between the solar simulator spectrum and the reference spectrum draw attention and for some special types of speciments these corrections are still object for further development. For less special types the procedures outlined in this report are considered sufficiently accurate. The g-value as function of incidence angle for three different glazings have been measured in the METSET. The glazings had very different optical properties ranging from almost no spectral selectivity to significant spectral selectivity. However all glazings were clear and their g-values could be calculated using detailed calculation models. This enabled a comparison between measured and calculated g-values assuming that the uncertainty in the calculated values is {+-}5%. An error analysis of the g-value measurements showed that the expected uncertainty for the measured g-value is about 4-10% for the investigated samples. The measured g-values were ranging from 0.29 to 0.75 and the difference between measured and calculated values were all within the expected uncertainties (max difference 7%). This gives good reason to increase the confidence in the method used to obtain the measured/corrected g-values and shows that the calorimetric measurements - when properly corrected - give meaningful results. Broadband transmittance values corresponding to solar simulator spectrum and to 'real' solar spectrum are in some cases useful data for the correction of g-values measured indoor in the METSET. This is specially true if the sample cannot be characterised by an optical calculation model (e.g. many
Characterisation of areal surface texture

CERN Document Server

Leach, Richard

2014-01-01

This book presents the areal framework that is being adopted by the international community, concentrating on characterisation methods, and presenting case studies highlighting use of areal methods in applications from automobile manufacturing to archaeology.
A chemometric approach to the characterisation of historical mortars

International Nuclear Information System (INIS)

Rampazzi, L.; Pozzi, A.; Sansonetti, A.; Toniolo, L.; Giussani, B.

2006-01-01

The compositional knowledge of historical mortars is of great concern in case of provenance and dating investigations and of conservation works since the nature of the raw materials suggests the most compatible conservation products. The classic characterisation usually goes through various analytical determinations, while conservation laboratories call for simple and quick analyses able to enlighten the nature of mortars, usually in terms of the binder fraction. A chemometric approach to the matter is here undertaken. Specimens of mortars were prepared with calcitic and dolomitic binders and analysed by Atomic Spectroscopy. Principal Components Analysis (PCA) was used to investigate the features of specimens and samples. A Partial Least Square (PLS1) regression was done in order to predict the binder/aggregate ratio. The model was applied to historical mortars from the churches of St. Lorenzo (Milan) and St. Abbondio (Como). The accordance between the predictive model and the real samples is discussed

Characterisation of mouse prothymocytes

NARCIS (Netherlands)

Boersma, W.J.A.

1982-01-01

In this thesis, the study of growth kinetics of thymocytes in lethally irradiated mice as a means to characterise the early T-cell progenitors is described. Normal bone marrow cells were used as the source of hemopoietic cells. The experiments show that it is possible to obtain information on T-cell
Characterising human atherosclerotic carotid plaque tissue composition and morphology using combined spectroscopic and imaging modalities.

Science.gov (United States)

Barrett, Hilary E; Mulvihill, John J; Cunnane, Eoghan M; Walsh, Michael T

2015-01-01

Calcification is a marked pathological component in carotid artery plaque. Studies have suggested that calcification may induce regions of high stress concentrations therefore increasing the potential for rupture. However, the mechanical behaviour of the plaque under the influence of calcification is not fully understood. A method of accurately characterising the calcification coupled with the associated mechanical plaque properties is needed to better understand the impact of calcification on the mechanical behaviour of the plaque during minimally invasive treatments. This study proposes a comparison of biochemical and structural characterisation methods of the calcification in carotid plaque specimens to identify plaque mechanical behaviour. Biochemical analysis, by Fourier Transform Infrared (FTIR) spectroscopy, was used to identify the key components, including calcification, in each plaque sample. However, FTIR has a finite penetration depth which may limit the accuracy of the calcification measurement. Therefore, this FTIR analysis was coupled with the identification of the calcification inclusions located internally in the plaque specimen using micro x-ray computed tomography (μX-CT) which measures the calcification volume fraction (CVF) to total tissue content. The tissue characterisation processes were then applied to the mechanical material plaque properties acquired from experimental circumferential loading of human carotid plaque specimen for comparison of the methods. FTIR characterised the degree of plaque progression by identifying the functional groups associated with lipid, collagen and calcification in each specimen. This identified a negative relationship between stiffness and 'lipid to collagen' and 'calcification to collagen' ratios. However, μX-CT results suggest that CVF measurements relate to overall mechanical stiffness, while peak circumferential strength values may be dependent on specific calcification geometries. This study
Characterisation of AGR fuel cladding alloy using secondary ion mass spectrometry

International Nuclear Information System (INIS)

Allen, G.C.; Sparry, R.P.; Wild, R.K.

1987-08-01

Uranium dioxide fuel used in the Advanced Gas Cooled Reactor (AGR) is contained in a ribbed can of 20wt%Cr/25wt%Ni/Nb stabilised steel. Laboratory circumstances, spall during thermal cycling. To date it has been difficult to identify active material originating from the oxidation product of the cladding alloy in the cooling circuit. In an attempt to solve this problem we have set out to characterise fully a sample of oxide from this source and work is in progress to obtain suitable oxide samples from the surface of a 20%Cr/25%Ni/Nb stainless steel. In view of its high sensitivity and the ability to obtain chemical information from relatively small areas we have sought to use Secondary Ion Mass Spectroscopy (SIMS). (author)
Pick a Color MARIA: Adaptive Sampling Enables the Rapid Identification of Complex Perovskite Nanocrystal Compositions with Defined Emission Characteristics.

Science.gov (United States)

Bezinge, Leonard; Maceiczyk, Richard M; Lignos, Ioannis; Kovalenko, Maksym V; deMello, Andrew J

2018-06-06

Recent advances in the development of hybrid organic-inorganic lead halide perovskite (LHP) nanocrystals (NCs) have demonstrated their versatility and potential application in photovoltaics and as light sources through compositional tuning of optical properties. That said, due to their compositional complexity, the targeted synthesis of mixed-cation and/or mixed-halide LHP NCs still represents an immense challenge for traditional batch-scale chemistry. To address this limitation, we herein report the integration of a high-throughput segmented-flow microfluidic reactor and a self-optimizing algorithm for the synthesis of NCs with defined emission properties. The algorithm, named Multiparametric Automated Regression Kriging Interpolation and Adaptive Sampling (MARIA), iteratively computes optimal sampling points at each stage of an experimental sequence to reach a target emission peak wavelength based on spectroscopic measurements. We demonstrate the efficacy of the method through the synthesis of multinary LHP NCs, (Cs/FA)Pb(I/Br) 3 (FA = formamidinium) and (Rb/Cs/FA)Pb(I/Br) 3 NCs, using MARIA to rapidly identify reagent concentrations that yield user-defined photoluminescence peak wavelengths in the green-red spectral region. The procedure returns a robust model around a target output in far fewer measurements than systematic screening of parametric space and additionally enables the prediction of other spectral properties, such as, full-width at half-maximum and intensity, for conditions yielding NCs with similar emission peak wavelength.
Characterisation of COPD heterogeneity in the ECLIPSE cohort

DEFF Research Database (Denmark)

Agusti, Alvar; Calverley, Peter M A; Celli, Bartolome

2010-01-01

Chronic obstructive pulmonary disease (COPD) is a complex condition with pulmonary and extra-pulmonary manifestations. This study describes the heterogeneity of COPD in a large and well characterised and controlled COPD cohort (ECLIPSE).......Chronic obstructive pulmonary disease (COPD) is a complex condition with pulmonary and extra-pulmonary manifestations. This study describes the heterogeneity of COPD in a large and well characterised and controlled COPD cohort (ECLIPSE)....
In search of a representative sample of residential building work.

Science.gov (United States)

Lobb, Brenda; Woods, Gregory R

2012-09-01

Most research investigating injuries in construction work is limited by reliance on work samples unrepresentative of the multiple, variable-cycle tasks involved, resulting in incomplete characterisation of ergonomic exposures. In this case study, a participatory approach was used including hierarchical task analysis and site observations of a typical team of house builders in New Zealand, over several working days, to obtain a representative work sample. The builders' work consisted of 14 goal-defined jobs using varying subsets of 15 task types, each taking from less than 1 s to more than 1 h and performed in a variety of postures. Task type and duration varied within and between participants and days, although all participants spent at least 25% of the time moving from place to place, mostly carrying materials, and more than half the time either reaching up or bending down to work. This research has provided a description of residential building work based on a work sample more nearly representative than those previously published and has demonstrated a simple, low-cost but robust field observation method that can provide a valid basis for further study of hazard exposures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.
Structural and spectroscopic characterisations of the surface oxide scales and inclusions present on edge-burst hot-rolled steel coils

International Nuclear Information System (INIS)

Chowdhury, Anirban; Iyyappan, Ramasamy; Majumdar, Dipanwita; Singha, Achintya

2014-01-01

Detailed structural and spectroscopic characterisations have been carried out on the inclusions and the surface oxides present on edge-burst hot-rolled steel coils. Surface scales were characterised through X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy. Evidence of different types of regular and non-stoichiometric Fe-oxides was found on the cracked surface of the steel wire. Along with the surface scales inclusions with calcium aluminate and spinel was characterized using Raman spectroscopy. The usefulness of Raman spectroscopy has been explored in detail for the characterisation of these inclusions; especially when XRD information ceases to be a limiting tool. The samples collected from the clogged nozzle area were found to be of grossite (CaO·2Al 2 O 3 ) phase and this was also observed in the inclusions in the finished coils. It was found that this particular calcium aluminate phase has a detrimental effect on casting and final finished steel products. - Highlights: • First investigation and surface study report on edge-bursting issue of steel coils. • Detailed characterisations of the inclusions and surface oxide scales in steel. • Influence of a particular type of calcium aluminate phase on process chemistry
Radiometric characterisation of more representative natural building materials in the province of Rome

International Nuclear Information System (INIS)

Trevisi, R.; Bruno, M.; Orlando, C.; Ocone, R.; Paolelli, C.; Amici, M.; Altieri, A.; Antonelli, B.

2005-01-01

Natural building materials, characterised by middle-low-activity concentrations of primordial radionuclides ( 40 K, 232 Th and 238 U series) are widely used in Italy. Since natural materials reflect the geological variability of their sites of origin, a systematic study was carried out in the province of Rome and the results are reported in this paper. In the present work, in order to evaluate average, minimum and maximum contents of primordial radionuclides, more representative lithologies outcropping on the territory of the province of Rome were identified and around 150 samples were collected. Also, these lithologies were characterised from a radioprotection point of view, by means of the evaluation of the index, I, when they are used as building materials. The results confirm the high-primordial radionuclide content within some materials used in Latium (central Italy). Although the study was carried out in a limited area, the results confirm considerable variation in the primordial radionuclide content depending on the sites of origin. (authors)
Soil sampling strategies: Evaluation of different approaches

Energy Technology Data Exchange (ETDEWEB)

De Zorzi, Paolo [Agenzia per la Protezione dell' Ambiente e per i Servizi Tecnici (APAT), Servizio Metrologia Ambientale, Via di Castel Romano, 100-00128 Roma (Italy)], E-mail: paolo.dezorzi@apat.it; Barbizzi, Sabrina; Belli, Maria [Agenzia per la Protezione dell' Ambiente e per i Servizi Tecnici (APAT), Servizio Metrologia Ambientale, Via di Castel Romano, 100-00128 Roma (Italy); Mufato, Renzo; Sartori, Giuseppe; Stocchero, Giulia [Agenzia Regionale per la Prevenzione e Protezione dell' Ambiente del Veneto, ARPA Veneto, U.O. Centro Qualita Dati, Via Spalato, 14-36045 Vicenza (Italy)

2008-11-15

The National Environmental Protection Agency of Italy (APAT) performed a soil sampling intercomparison, inviting 14 regional agencies to test their own soil sampling strategies. The intercomparison was carried out at a reference site, previously characterised for metal mass fraction distribution. A wide range of sampling strategies, in terms of sampling patterns, type and number of samples collected, were used to assess the mean mass fraction values of some selected elements. The different strategies led in general to acceptable bias values (D) less than 2{sigma}, calculated according to ISO 13258. Sampling on arable land was relatively easy, with comparable results between different sampling strategies.
Soil sampling strategies: Evaluation of different approaches

International Nuclear Information System (INIS)

De Zorzi, Paolo; Barbizzi, Sabrina; Belli, Maria; Mufato, Renzo; Sartori, Giuseppe; Stocchero, Giulia

2008-01-01

The National Environmental Protection Agency of Italy (APAT) performed a soil sampling intercomparison, inviting 14 regional agencies to test their own soil sampling strategies. The intercomparison was carried out at a reference site, previously characterised for metal mass fraction distribution. A wide range of sampling strategies, in terms of sampling patterns, type and number of samples collected, were used to assess the mean mass fraction values of some selected elements. The different strategies led in general to acceptable bias values (D) less than 2σ, calculated according to ISO 13258. Sampling on arable land was relatively easy, with comparable results between different sampling strategies
Soil sampling strategies: evaluation of different approaches.

Science.gov (United States)

de Zorzi, Paolo; Barbizzi, Sabrina; Belli, Maria; Mufato, Renzo; Sartori, Giuseppe; Stocchero, Giulia

2008-11-01

The National Environmental Protection Agency of Italy (APAT) performed a soil sampling intercomparison, inviting 14 regional agencies to test their own soil sampling strategies. The intercomparison was carried out at a reference site, previously characterised for metal mass fraction distribution. A wide range of sampling strategies, in terms of sampling patterns, type and number of samples collected, were used to assess the mean mass fraction values of some selected elements. The different strategies led in general to acceptable bias values (D) less than 2sigma, calculated according to ISO 13258. Sampling on arable land was relatively easy, with comparable results between different sampling strategies.
Characterisation of focal liver lesions with contrast enhanced ultrasonography

International Nuclear Information System (INIS)

Dietrich, Christoph F.

2004-01-01

Ultrasound contrast agents (USCA) have improved the detection rate of liver tumours in recent years. Conventional ultrasound has been reported to be relatively unreliable in the characterisation of liver tumours. SonoVue [reg] (Bracco Imaging Spa) has been shown to be particularly advantageous in the differentiation of benign and malignant liver tumours and, therefore, possibly represents a new cost-effective competitive alternative to other liver imaging modalities (e.g. computed tomography and magnetic resonance imaging), thus allowing these important technologies to be available for other indications (e.g. brain, thorax). More detailed and specific liver tumour characterisation is possible in about 80% of liver tumours due to typical vascularity and perfusion patterns. The role of USCA for better characterisation, which is possible through the analysis of flow characteristics in real time, places a particular emphasis on agent use. Contrast enhanced real-time imaging techniques with SonoVue [reg] allow real-time analysis of tumour perfusion in patients with liver lesions. Liver tumours known to be hyperperfused in the arterial phase (e.g. focal nodular hyperplasia, hepatocellular adenoma and carcinoma, and hyperperfused metastases) can be better detected and characterised. Hypoperfused tumours (e.g. liver metastases of the gastrointestinal tract) can be recognised in the portal venous phase as less perfused 'black spots'. In this article we discuss liver tumour characterisation by contrast enhanced ultrasonography
Identification and Characterisation of Wetlands For A Correct Basin Management

Science.gov (United States)

Quadrado, F.; Gomes, F.

The effects of human activities on water resources have great conse- quences for water users. Some of the problems affecting water resources arise from conflicting uses, including discharge of untreated industrial and domestic wastewater and inadequate agricultural practices on the watersheds. The knowledge of hydrologic and water quality characteristics and behaviour of the system will provide the basis for action to prevent the degradation of water resources. So comprehensive and ratio- nal water management is a necessary condition for social and economic development. The Water Framework Directive defines a good status for all waters all types of waters to be achieved in 15 years. To wetlands the Directive purpose the prevention of their degradation and the protection of those wetlands directly depending on aquatic sys- tems. The sensitiveness of wetlands leads to a difficult management of this resources where it is necessary to know the dynamic of the system and the pressures that can change the ecosystem equilibrium. In spite of the critical role of wetlands, there is a lack of information related with these areas, many times not included in the monitor- ing activity routines. A water quality-monitoring network is an essential instrument of water management. Portugal is now redesigning their freshwater network monitoring in a watershed basis, to provide the necessary data to preserve and control the water quality of the rivers and reservoirs. The combined approach principle to the protec- tion of water that is defended in the Water Framework Directive, was adopted. One of the criterion used to the localisation of sampling stations were characterisation of protected areas. Portugal due to his natural and climate conditions have some impor- tant and unique ecosystems, sometimes being considered as protected areas. Their characteristics must be studied and their equilibrium preserved. Anyhow a little at- tention had been provided to these zones and the actual
Source-term characterisation and solid speciation of plutonium at the Semipalatinsk NTS, Kazakhstan.

Science.gov (United States)

Nápoles, H Jiménez; León Vintró, L; Mitchell, P I; Omarova, A; Burkitbayev, M; Priest, N D; Artemyev, O; Lukashenko, S

2004-01-01

New data on the concentrations of key fission/activation products and transuranium nuclides in samples of soil and water from the Semipalatinsk Nuclear Test Site are presented and interpreted. Sampling was carried out at Ground Zero, Lake Balapan, the Tel'kem craters and reference locations within the test site boundary well removed from localised sources. Radionuclide ratios have been used to characterise the source term(s) at each of these sites. The geochemical partitioning of plutonium has also been examined and it is shown that the bulk of the plutonium contamination at most of the sites examined is in a highly refractory, non-labile form.
Source-term characterisation and solid speciation of plutonium at the Semipalatinsk NTS, Kazakhstan

Energy Technology Data Exchange (ETDEWEB)

Napoles, H.J.H. Jimenez; Leon Vintro, L. E-mail: luis.leon@ucd.ie; Mitchell, P.I.; Omarova, A.; Burkitbayev, M.; Priest, N.D.; Artemyev, O.; Lukashenko, S

2004-09-01

New data on the concentrations of key fission/activation products and transuranium nuclides in samples of soil and water from the Semipalatinsk Nuclear Test Site are presented and interpreted. Sampling was carried out at Ground Zero, Lake Balapan, the Tel'kem craters and reference locations within the test site boundary well removed from localised sources. Radionuclide ratios have been used to characterise the source term(s) at each of these sites. The geochemical partitioning of plutonium has also been examined and it is shown that the bulk of the plutonium contamination at most of the sites examined is in a highly refractory, non-labile form.
Contribution of past and future self-defining event networks to personal identity.

Science.gov (United States)

Demblon, Julie; D'Argembeau, Arnaud

2017-05-01

Personal identity is nourished by memories of significant past experiences and by the imagination of meaningful events that one anticipates to happen in the future. The organisation of such self-defining memories and prospective thoughts in the cognitive system has received little empirical attention, however. In the present study, our aims were to investigate to what extent self-defining memories and future projections are organised in networks of related events, and to determine the nature of the connections linking these events. Our results reveal the existence of self-defining event networks, composed of both memories and future events of similar centrality for identity and characterised by similar identity motives. These self-defining networks expressed a strong internal coherence and frequently organised events in meaningful themes and sequences (i.e., event clusters). Finally, we found that the satisfaction of identity motives in represented events and the presence of clustering across events both contributed to increase in the perceived centrality of events for the sense of identity. Overall, these findings suggest that personal identity is not only nourished by representations of significant past and future events, but also depends on the formation of coherent networks of related events that provide an overarching meaning to specific life experiences.
Materials Characterisation of Glass/epoxy Composites - Focusing on Process Conditions

DEFF Research Database (Denmark)

Jakobsen, Johnny; Lyckegaard, Anders; Jensen, Erik Appel

2013-01-01

Predicting the behaviour of fibre reinforced polymer composites taking the process conditions into account involves advanced modelling techniques and an extensive materials characterisation. The materials characterisation of a chopped strand mat glass/epoxy composite has been the focus...
USEtox - The UNEP-SETAC toxicity model: recommended characterisation factors for human toxicity and freshwater ecotoxicity in Life Cycle Impact Assessment

DEFF Research Database (Denmark)

Rosenbaum, Ralph K.; Bachmann, Till M; Gold, Lois S.

2008-01-01

, and (iii) to build a scientific consensus model from them, representing recommended practice. Methods. A chemical test set of 45 organics covering a wide range of property combinations was selected for this purpose. All models used this set. In three workshops, the model comparison participants identified......, defining a closed or open system environment, or nesting an urban box in a continental box. Discussion. The precision of the new characterisation factors (CFs) is within a factor of 100-1000 for human health and 10-100 for freshwater ecotoxicity of all other models compared to 12 orders of magnitude......Background, Aim and Scope. In 2005 a comprehensive comparison of LCIA toxicity characterisation models was initiated by the UNEP-SETAC Life Cycle Initiative, directly involving the model developers of CalTOX, IMPACT 2002, USES-LCA, BETR, EDIP, WATSON, and EcoSense. In this paper we describe...
Mechanical characterisation of porcine rectus sheath under uniaxial and biaxial tension.

LENUS (Irish Health Repository)

Lyons, Mathew

2014-06-03

Incisional hernia development is a significant complication after laparoscopic abdominal surgery. Intra-abdominal pressure (IAP) is known to initiate the extrusion of intestines through the abdominal wall, but there is limited data on the mechanics of IAP generation and the structural properties of rectus sheath. This paper presents an explanation of the mechanics of IAP development, a study of the uniaxial and biaxial tensile properties of porcine rectus sheath, and a simple computational investigation of the tissue. Analysis using Laplace׳s law showed a circumferential stress in the abdominal wall of approx. 1.1MPa due to an IAP of 11kPa, commonly seen during coughing. Uniaxial and biaxial tensile tests were conducted on samples of porcine rectus sheath to characterise the stress-stretch responses of the tissue. Under uniaxial tension, fibre direction samples failed on average at a stress of 4.5MPa at a stretch of 1.07 while cross-fibre samples failed at a stress of 1.6MPa under a stretch of 1.29. Under equi-biaxial tension, failure occurred at 1.6MPa with the fibre direction stretching to only 1.02 while the cross-fibre direction stretched to 1.13. Uniaxial and biaxial stress-stretch plots are presented allowing detailed modelling of the tissue either in silico or in a surrogate material. An FeBio computational model of the tissue is presented using a combination of an Ogden and an exponential power law model to represent the matrix and fibres respectively. The structural properties of porcine rectus sheath have been characterised and add to the small set of human data in the literature with which it may be possible to develop methods to reduce the incidence of incisional hernia development.
Representative process sampling - in practice

DEFF Research Database (Denmark)

Esbensen, Kim; Friis-Pedersen, Hans Henrik; Julius, Lars Petersen

2007-01-01

Didactic data sets representing a range of real-world processes are used to illustrate "how to do" representative process sampling and process characterisation. The selected process data lead to diverse variogram expressions with different systematics (no range vs. important ranges; trends and....../or periodicity; different nugget effects and process variations ranging from less than one lag to full variogram lag). Variogram data analysis leads to a fundamental decomposition into 0-D sampling vs. 1-D process variances, based on the three principal variogram parameters: range, sill and nugget effect...

Elaboration and characterisation of plutonium waste reference materials

International Nuclear Information System (INIS)

Perolat, J.P.

1990-01-01

The Analysis Methods Establishment Commission (CETAMA) has set up a program for the elaboration and characterisation of plutonium waste reference materials. The object of this program is to give laboratories the possibility to test and calibrate apparatus used in non-destructive methods for the analysis of plutonium waste. The different parameters of this program are presented: - characterisation of plutonium, - type and number of containers, - plutonium distribution inside the different containers, - description of the matrix
Characterisation of contamination migration in the workplace

International Nuclear Information System (INIS)

Boulaud, D.; Laborde, J.C.; Pourprix, M.

1994-01-01

The Institute for Nuclear Safety and Protection (IPSN) has developed a procedure for characterising airborne contamination between processes and the workplace in nuclear facilities. It was initially intended to use this process to validate operator choices concerning the monitoring of indoor air contamination (personnel monitoring, and environmental detection at fixed locations), but also to optimise the fundamental parameters which have a more or less direct influence on potential exposure of staff in the workplace (at the same time optimising the contamination source, close confinement, process ventilation and general ventilation). In practice, the methods used to obtain these expert appraisals were usually based on experiments carried out in situ: (i) characterisation of aerosol contamination by accurate measurement of the nature, concentration and particle size distribution at various locations; (ii) characterisation of the migration of contamination by precise measurement involving gas and/or particle tracing techniques. In parallel with these experiments, a considerable effort was made to develop and qualify computer codes capable of predicting or estimating the migration of contamination through complex ventilated areas, by means of both fluid mechanics and aerosol science. (Author)
Effect of image scaling and segmentation in digital rock characterisation

Science.gov (United States)

Jones, B. D.; Feng, Y. T.

2016-04-01

Digital material characterisation from microstructural geometry is an emerging field in computer simulation. For permeability characterisation, a variety of studies exist where the lattice Boltzmann method (LBM) has been used in conjunction with computed tomography (CT) imaging to simulate fluid flow through microscopic rock pores. While these previous works show that the technique is applicable, the use of binary image segmentation and the bounceback boundary condition results in a loss of grain surface definition when the modelled geometry is compared to the original CT image. We apply the immersed moving boundary (IMB) condition of Noble and Torczynski as a partial bounceback boundary condition which may be used to better represent the geometric definition provided by a CT image. The IMB condition is validated against published work on idealised porous geometries in both 2D and 3D. Following this, greyscale image segmentation is applied to a CT image of Diemelstadt sandstone. By varying the mapping of CT voxel densities to lattice sites, it is shown that binary image segmentation may underestimate the true permeability of the sample. A CUDA-C-based code, LBM-C, was developed specifically for this work and leverages GPU hardware in order to carry out computations.
Characterisation of a reference site for quantifying uncertainties related to soil sampling

International Nuclear Information System (INIS)

Barbizzi, Sabrina; Zorzi, Paolo de; Belli, Maria; Pati, Alessandra; Sansone, Umberto; Stellato, Luisa; Barbina, Maria; Deluisa, Andrea; Menegon, Sandro; Coletti, Valter

2004-01-01

An integrated approach to quality assurance in soil sampling remains to be accomplished. - The paper reports a methodology adopted to face problems related to quality assurance in soil sampling. The SOILSAMP project, funded by the Environmental Protection Agency of Italy (APAT), is aimed at (i) establishing protocols for soil sampling in different environments; (ii) assessing uncertainties associated with different soil sampling methods in order to select the 'fit-for-purpose' method; (iii) qualifying, in term of trace elements spatial variability, a reference site for national and international inter-comparison exercises. Preliminary results and considerations are illustrated
Radiological Characterisation from a Waste and Materials End-State Perspective: Practices and Experience

International Nuclear Information System (INIS)

Mommaert, Chantal; Andrieu, Caroline; Desnoyers, Yvon; Denis Pombet; Salsac, Marie-Delphine; Knaack, Michael; Altavilla, Massimo; Manes, Daniela; Takahashi, Hiroaki; Ul Syed, Naeem; Palomo, Nieves Martin; Larsson, Arne; Dunlop, Alister; Susan Brown; Emptage, Matthew; Black, Greg; Abu-Eid, Rateb; Szilagyi, Andrew; Weber, Inge; )

2017-01-01

Radiological characterisation is a key enabling activity for the planning and implementation of nuclear facility decommissioning. Effective characterisation allows the extent, location and nature of contamination to be determined and provides crucial information for facility dismantling, the management of material and waste arisings, the protection of workers, the public and the environment, and associated cost estimations. This report will be useful for characterisation practitioners who carry out tactical planning, preparation, optimisation and implementation of characterisation to support the decommissioning of nuclear facilities and the management of associated materials and waste. It compiles recent experience from NEA member countries in radiological characterisation, including from international experts, international case studies, an international conference, and international standards and guidance. Using this comprehensive evidence base, the report identifies relevant good practice and provides practical advice covering all stages of the characterisation process
Characterising performance of environmental models

NARCIS (Netherlands)

Bennett, N.D.; Croke, B.F.W.; Guariso, G.; Guillaume, J.H.A.; Hamilton, S.H.; Jakeman, A.J.; Marsili-Libelli, S.; Newham, L.T.H.; Norton, J.; Perrin, C.; Pierce, S.; Robson, B.; Seppelt, R.; Voinov, A.; Fath, B.D.; Andreassian, V.

2013-01-01

In order to use environmental models effectively for management and decision-making, it is vital to establish an appropriate level of confidence in their performance. This paper reviews techniques available across various fields for characterising the performance of environmental models with focus
Industrial variographic analysis for continuous sampling system validation

DEFF Research Database (Denmark)

Engström, Karin; Esbensen, Kim Harry

2017-01-01

Karin Engström, LKAB mining, Kiruna, Sweden, continues to present illuminative cases from process industry. Here she reveals more from her ongoing PhD project showing application of variographic characterisation for on-line continuous control of process sampling systems, including the one...
Kinematic behaviour of a large earthflow defined by surface displacement monitoring, DEM differencing, and ERT imaging

Science.gov (United States)

Prokešová, Roberta; Kardoš, Miroslav; Tábořík, Petr; Medveďová, Alžbeta; Stacke, Václav; Chudý, František

2014-11-01

Large earthflow-type landslides are destructive mass movement phenomena with highly unpredictable behaviour. Knowledge of earthflow kinematics is essential for understanding the mechanisms that control its movements. The present paper characterises the kinematic behaviour of a large earthflow near the village of Ľubietová in Central Slovakia over a period of 35 years following its most recent reactivation in 1977. For this purpose, multi-temporal spatial data acquired by point-based in-situ monitoring and optical remote sensing methods have been used. Quantitative data analyses including strain modelling and DEM differencing techniques have enabled us to: (i) calculate the annual landslide movement rates; (ii) detect the trend of surface displacements; (iii) characterise spatial variability of movement rates; (iv) measure changes in the surface topography on a decadal scale; and (v) define areas with distinct kinematic behaviour. The results also integrate the qualitative characteristics of surface topography, in particular the distribution of surface structures as defined by a high-resolution DEM, and the landslide subsurface structure, as revealed by 2D resistivity imaging. Then, the ground surface kinematics of the landslide is evaluated with respect to the specific conditions encountered in the study area including slope morphology, landslide subsurface structure, and local geological and hydrometeorological conditions. Finally, the broader implications of the presented research are discussed with particular focus on the role that strain-related structures play in landslide kinematic behaviour.
Characterisation and airborne deployment of a new counterflow virtual impactor inlet

Directory of Open Access Journals (Sweden)

T. Shingler

2012-06-01

Full Text Available A new counterflow virtual impactor (CVI inlet is introduced with details of its design, laboratory characterisation tests and deployment on an aircraft during the 2011 Eastern Pacific Emitted Aerosol Cloud Experiment (E-PEACE. The CVI inlet addresses three key issues in previous designs; in particular, the inlet operates with: (i negligible organic contamination; (ii a significant sample flow rate to downstream instruments (∼15 l min⁻¹ that reduces the need for dilution; and (iii a high level of accessibility to the probe interior for cleaning. Wind tunnel experiments characterised the cut size of sampled droplets and the particle size-dependent transmission efficiency in various parts of the probe. For a range of counter-flow rates and air velocities, the measured cut size was between 8.7–13.1 μm. The mean percentage error between cut size measurements and predictions from aerodynamic drag theory is 1.7%. The CVI was deployed on the Center for Interdisciplinary Remotely Piloted Aircraft Studies (CIRPAS Twin Otter for thirty flights during E-PEACE to study aerosol-cloud-radiation interactions off the central coast of California in July and August 2011. Results are reported to assess the performance of the inlet including comparisons of particle number concentration downstream of the CVI and cloud drop number concentration measured by two independent aircraft probes. Measurements downstream of the CVI are also examined from one representative case flight coordinated with shipboard-emitted smoke that was intercepted in cloud by the Twin Otter.
Characterisation of transition state structures for protein folding using 'high', 'medium' and 'low' {Phi}-values.

Science.gov (United States)

Geierhaas, Christian D; Salvatella, Xavier; Clarke, Jane; Vendruscolo, Michele

2008-03-01

It has been suggested that Phi-values, which allow structural information about transition states (TSs) for protein folding to be obtained, are most reliably interpreted when divided into three classes (high, medium and low). High Phi-values indicate almost completely folded regions in the TS, intermediate Phi-values regions with a detectable amount of structure and low Phi-values indicate mostly unstructured regions. To explore the extent to which this classification can be used to characterise in detail the structure of TSs for protein folding, we used Phi-values divided into these classes as restraints in molecular dynamics simulations. This type of procedure is related to that used in NMR spectroscopy to define the structure of native proteins from the measurement of inter-proton distances derived from nuclear Overhauser effects. We illustrate this approach by determining the TS ensembles of five proteins and by showing that the results are similar to those obtained by using as restraints the actual numerical Phi-values measured experimentally. Our results indicate that the simultaneous consideration of a set of low-resolution Phi-values can provide sufficient information for characterising the architecture of a TS for folding of a protein.
Quantitative Characterisation of Surface Texture

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Lonardo, P.M.; Trumpold, H.

2000-01-01

This paper reviews the different methods used to give a quantitative characterisation of surface texture. The paper contains a review of conventional 2D as well as 3D roughness parameters, with particular emphasis on recent international standards and developments. It presents new texture...
Defining severe familial hypercholesterolaemia and the implications for clinical management: a consensus statement from the International Atherosclerosis Society Severe Familial Hypercholesterolemia Panel.

Science.gov (United States)

Santos, Raul D; Gidding, Samuel S; Hegele, Robert A; Cuchel, Marina A; Barter, Philip J; Watts, Gerald F; Baum, Seth J; Catapano, Alberico L; Chapman, M John; Defesche, Joep C; Folco, Emanuela; Freiberger, Tomas; Genest, Jacques; Hovingh, G Kees; Harada-Shiba, Mariko; Humphries, Steve E; Jackson, Ann S; Mata, Pedro; Moriarty, Patrick M; Raal, Frederick J; Al-Rasadi, Khalid; Ray, Kausik K; Reiner, Zelijko; Sijbrands, Eric J G; Yamashita, Shizuya

2016-10-01

Familial hypercholesterolaemia is common in individuals who had a myocardial infarction at a young age. As many as one in 200 people could have heterozygous familial hypercholesterolaemia, and up to one in 300 000 individuals could be homozygous. The phenotypes of heterozygous and homozygous familial hypercholesterolaemia overlap considerably; the response to treatment is also heterogeneous. In this Review, we aim to define a phenotype for severe familial hypercholesterolaemia and identify people at highest risk for cardiovascular disease, based on the concentration of LDL cholesterol in blood and individuals' responsiveness to conventional lipid-lowering treatment. We assess the importance of molecular characterisation and define the role of other cardiovascular risk factors and advanced subclinical coronary atherosclerosis in risk stratification. Individuals with severe familial hypercholesterolaemia might benefit in particular from early and more aggressive cholesterol-lowering treatment (eg, with PCSK9 inhibitors). In addition to better tailored therapy, more precise characterisation of individuals with severe familial hypercholesterolaemia could improve resource use. Copyright © 2016 Elsevier Ltd. All rights reserved.
FRACTIONATION AND CHARACTERISATION OF TECHNICAL AMMONIUM LIGNOSULPHONATE

Directory of Open Access Journals (Sweden)

Cheryl Ann Leger

2010-08-01

Full Text Available It is difficult to use lignin in any analytical methodology without reducing its considerable polydispersity by fractionation. An ammonium lignosulphonate sample was fractionated using a method of partial solubility in solutions of isopropanol increasingly diluted with distilled water, effectively fractionating by polarity. Selected fractions were characterised by gravimetric determination of the fractions, and determination of acid insoluble lignin, soluble lignin, and carbohydrate contents. Acid-insoluble lignin content was very low, and soluble lignin provided the majority of the lignin content, as should be expected from sulphonated lignin. Carbohydrate contents were also fairly low, the highest percentage at 14.5 being in Fraction 2, with the bulk lignin and Fraction 3 having 6.5% and 3.2%, respectively. Differences in the composition of each fraction support the efficacy of the fractionation process and permitted selection of fractions for use in subsequent studies.
Characterisation of subsonic axisymmetric nozzles

Czech Academy of Sciences Publication Activity Database

Tesař, Václav

2008-01-01

Roč. 86, č. 11 (2008), s. 1253-1262 ISSN 0263-8762 R&D Projects: GA AV ČR IAA200760705 Institutional research plan: CEZ:AV0Z20760514 Keywords : nozzle * characterisation * nozzle properties * nozzle invariants Subject RIV: BK - Fluid Dynamics Impact factor: 0.989, year: 2008
Ion beam induced luminescence characterisation of CVD diamond films

Energy Technology Data Exchange (ETDEWEB)

Bettiol, A.A.; Gonon, P.; Jamieson, D.N. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1996-12-31

The characterisation of the band structure properties of materials and devices by ion microprobe techniques has been made possible at the Melbourne MeV ion microprobe facility with the development of Ion Beam Induced Luminescence (IBIL). A number of diamond films grown by Microwave Plasma Chemical Vapour Deposition (MPCVD) on silicon substrates are analysed. A preliminary study of the luminescence properties of these samples has revealed information not previously obtainable via traditional microprobe techniques. The optical effects of incorporating dopants during the deposition process is determined using IBIL. The presence of trace element impurities introduced during growth is examined by Particle Induced X-ray Emission (PIXE), and a measurement of the film thickness is made using Rutherford Backscattering Spectrometry (RBS). 7 refs., 2 figs.
Ion beam induced luminescence characterisation of CVD diamond films

Energy Technology Data Exchange (ETDEWEB)

Bettiol, A A; Gonon, P; Jamieson, D N [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-12-31

The characterisation of the band structure properties of materials and devices by ion microprobe techniques has been made possible at the Melbourne MeV ion microprobe facility with the development of Ion Beam Induced Luminescence (IBIL). A number of diamond films grown by Microwave Plasma Chemical Vapour Deposition (MPCVD) on silicon substrates are analysed. A preliminary study of the luminescence properties of these samples has revealed information not previously obtainable via traditional microprobe techniques. The optical effects of incorporating dopants during the deposition process is determined using IBIL. The presence of trace element impurities introduced during growth is examined by Particle Induced X-ray Emission (PIXE), and a measurement of the film thickness is made using Rutherford Backscattering Spectrometry (RBS). 7 refs., 2 figs.
Characterisation of ferroelectric bulk materials and thin films

CERN Document Server

Cain, Markys G

2014-01-01

This book presents a comprehensive review of the most important methods used in the characterisation of piezoelectric, ferroelectric and pyroelectric materials. It covers techniques for the analysis of bulk materials and thick and thin film materials and devices. There is a growing demand by industry to adapt and integrate piezoelectric materials into ever smaller devices and structures. Such applications development requires the joint development of reliable, robust, accurate and - most importantly - relevant and applicable measurement and characterisation methods and models. In the past f
Molecular weight characterisation of synthetic polymers

CERN Document Server

Holding, Steve R

1995-01-01

The report comprises a state-of-the-art overview of the subject of molecular weight characterisation, supported by an extensive, indexed bibliography. The bibliography contains over 400 references and abstracts, compiled from the Polymer Library.
Nuclear Energy Agency task group on Radiological Characterisation for Decommissioning of Nuclear Installations

International Nuclear Information System (INIS)

Larsson, Arne; Weber, Inge

2016-01-01

Radiological characterisation plays a significant role in the process of decommissioning of shut-down nuclear facilities in order to ensure the protection of the environment and radiation safety. At all stages of a decommissioning programme or project, adequate radiological characterisation is of crucial importance, not least from a material and waste perspective. The radiological characterisation is a key element for planning, controlling and optimising decommissioning and dismantling activities. Experience has shown that data and information from the operation of a facility can - supplemented by recently collected and analysed data and information - be of crucial importance for decisions on waste management and for characterisation of radioactive waste. Once the dismantling has been done, some information may be hard, costly or even impossible to obtain later in the waste management process. This was the reason why the Working Party on Decommissioning and Dismantling (WPDD) of the OECD Nuclear Energy Agency (NEA) decided in late 2013 to extend the mandate of the Task Group on Radiological Characterisation and Decommissioning (TGRCD) for a second phase focusing on nuclear facility characterisation from a waste and material end-state perspective whereas the first phase focused on overall strategies of radiological characterisation. This paper gives an overview of the activities and findings within both phases up to now. (authors)
Thermo-Hydro-Mechanical Characterisation of the Bentonite of a Simulated HLW Repository after Five Years Operation ( In Situ Test of the FEBEX Project)

Energy Technology Data Exchange (ETDEWEB)

Villar, M. V.

2004-07-01

After five years of operation, heater 1 of the FEBEX experimental at the Grimsel Test Sites was switched off in February 2002. Following cooling of the system, the bentonite barrier was dismantled and the heater extracted. During dismantling many bentonite samples were taken. Several determinations were carried out in these samples with the aim of: (1) characterise the actual state of the bentonite and (2) determine the possible changes in its properties occurred during the experiment. The results of the thermo-hydro-mechanical characterisation performed at CIEMAT are reported and analysed. The distribution of water content and dry density of the bentonite in vertical sections presents axial symmetry. The construction gaps of the barrier have been filled by the expansion of the bentonite. The water retention capacity, the hydraulic conductivity and the swelling capacity of the samples from Grimsel have not irreversible changed. The pre consolidation pressure of the Grimsel samples has decreased due to the microstructural changes associated to the volume increase experienced during hydration. The thermal conductivity is higher for the bentonite blocks of the external ring of the barrier. (Author)

Thermo-Hydro-Mechanical Characterisation of the Bentonite of a Simulated HLW Repository after Five Years Operation ( In Situ Test of the FEBEX Project)

International Nuclear Information System (INIS)

Villar, M. V.

2004-01-01

After five years of operation, heater 1 of the FEBEX experimental at the Grimsel Test Sites was switched off in February 2002. Following cooling of the system, the bentonite barrier was dismantled and the heater extracted. During dismantling many bentonite samples were taken. Several determinations were carried out in these samples with the aim of: (1) characterise the actual state of the bentonite and (2) determine the possible changes in its properties occurred during the experiment. The results of the thermo-hydro-mechanical characterisation performed at CIEMAT are reported and analysed. The distribution of water content and dry density of the bentonite in vertical sections presents axial symmetry. The construction gaps of the barrier have been filled by the expansion of the bentonite. The water retention capaciaty, the hydraulic conductivity and the swelling capacity of the samples from Grimsel have not irreversible changed. The preconsolidation pressure of the Grimsel samples has decreased due to the microstructural changes asswociated to the volume increase experienced during hydration. The thermal conductivity is higher for the bentonite blocks of the external ring of the barrier. (Author)
Characterisation of dust material emitted during harbour operations (HADA Project)

Energy Technology Data Exchange (ETDEWEB)

Moreno, N.; Alastuey, A.; Querol, X.; Artinano, B.; Guerra, A.; Luaces, J.A.; Lorente, A.; Basora, J. [CSIC, Institute of Earth Science ' Jaume Almera' , Barcelona (Spain)

2007-09-15

The aim of this work is to compile an inventory of the main characteristics (chemical, morphological, mineralogical and grain size parameters) of the bulk cargo materials and of the material emitted during different port operations for possible use as tracers of the fugitive PM emission sources. For all cases, the tracer characteristics determined for each bulk material were also identified in the corresponding PM material emitted. This inventory could assist the harbour authorities to identify the origin of high PM events recorded by air quality monitoring networks in harbour areas, and could also help modellers to predict the impact of harbour activities on ambient PM levels. The harbour of Tarragona (north-east Spain) was selected for this study given the high volume of solids in bulk handled. To this end, 12 handling operations of selected materials (clinker, phosphate, pyrite ash, Mn mineral, fine Si-Mn, coke (coal), bituminous coal, tapioca, soybean, alfalfa, corn, andalusite) were selected for the characterisation of suspended and deposited PM. In spite of the coarse grain size distribution of these bulk cargo materials, with a very low % in the fraction {lt}10 {mu}m, manipulation of these materials during harbour operations may result in high emissions of PM 10 with relatively high levels of potential toxic elements. Furthermore, ambient PM 10 in the area with the highest traffic density of the harbour was also sampled and characterised.
CO2 Storage Feasibility: A Workflow for Site Characterisation

Directory of Open Access Journals (Sweden)

Nepveu Manuel

2015-04-01

Full Text Available In this paper, we present an overview of the SiteChar workflow model for site characterisation and assessment for CO2 storage. Site characterisation and assessment is required when permits are requested from the legal authorities in the process of starting a CO2 storage process at a given site. The goal is to assess whether a proposed CO2 storage site can indeed be used for permanent storage while meeting the safety requirements demanded by the European Commission (EC Storage Directive (9, Storage Directive 2009/31/EC. Many issues have to be scrutinised, and the workflow presented here is put forward to help efficiently organise this complex task. Three issues are highlighted: communication within the working team and with the authorities; interdependencies in the workflow and feedback loops; and the risk-based character of the workflow. A general overview (helicopter view of the workflow is given; the issues involved in communication and the risk assessment process are described in more detail. The workflow as described has been tested within the SiteChar project on five potential storage sites throughout Europe. This resulted in a list of key aspects of site characterisation which can help prepare and focus new site characterisation studies.
A multimarker qPCR platform for the characterisation of endometrial cancer.

Science.gov (United States)

Supernat, Anna; Łapińska-Szumczyk, Sylwia; Majewska, Hanna; Gulczyński, Jacek; Biernat, Wojciech; Wydra, Dariusz; Zaczek, Anna J

2014-02-01

The molecular background of endometrial cancer (EC) has not been fully elucidated. In the present study, we developed a quantitative PCR (qPCR) platform to examine the gene dosages of the potential molecular markers MGB1, TOP2A, ERBB1-4, MYC, CCND1, ESR1 and PI3K. The platform was applied in samples collected from 157 EC patients (stage I-IV) to verify its clinical utility and to examine the diagnostic and prognostic significance of the analysed biomarkers. The gene dosage pattern of the ERBB family and its downstream effectors PI3K and MYC showed particularly strong correlations with clinicopathological data. The ERBB PI3K/Akt pathway was upregulated in 31 (20%) of 156 cases. Activation of the ERBB PI3K/Akt pathway was positively correlated with a higher stage (p=0.001), higher grade (p=0.001), histological type II disease (p=0.0003) and metastases (p=0.02). The implemented hierarchical clustering revealed that cluster 2 was characterised by high copy numbers of the studied genes. Cluster 2 was associated with shorter overall survival (p=0.05). The platform was found to be a fast and simple method for direct analysis of the genes involved in uterine carcinogenesis, making it feasible for EC biology characterisation.
Ferrite nanoparticles: Synthesis, characterisation and applications in electronic device

Energy Technology Data Exchange (ETDEWEB)

Kefeni, Kebede K., E-mail: kkefeni@gmail.com; Msagati, Titus A.M.; Mamba, Bhekie B.

2017-01-15

Highlights: • Available synthesis methods of ferrite nanoparticles (FNPs) are briefly reviewed. • Summary of the advantage and limitation of FNPs synthesis techniques are presented. • The existing most common FNPs characterisation techniques are briefly reviewed. • Major application areas of FNPs in electronic materials are reviewed. - Abstract: Ferrite nanoparticles (FNPs) have attracted a great interest due to their wide applications in several areas such as biomedical, wastewater treatment, catalyst and electronic device. This review focuses on the synthesis, characterisation and application of FNPs in electronic device with more emphasis on the recently published works. The most commonly used synthesis techniques along with their advantages and limitations are discussed. The available characterisation techniques and their application in electronic materials such as sensors and biosensors, energy storage, microwave device, electromagnetic interference shielding and high-density recording media are briefly reviewed.
Seroepidemiology and phylogenetic characterisation of measles virus in Ireland, 2004-2013.

Science.gov (United States)

O' Riordan, Bernadette; Carr, Michael J; Connell, Jeff; Dunford, Linda; Hall, William W; Hassan, Jaythoon

2014-08-01

Ireland is classified as an area of high measles incidence. A World Health Organisation-European Region strategic plan exists for measles elimination by 2015. To retrospectively investigate measles outbreaks using all patient samples (sera and oral fluid) received for measles laboratory diagnosis and characterise the genetic diversity of circulating measles genotypes in Ireland. 704 cases of acute measles infection as determined by the presence of measles specific IgM in sera and oral fluids were confirmed at the National Virus Reference Laboratory. Measles positive samples (n=116) were examined by genotyping, sequence analysis and phylogenetic characterisation. Three measles outbreaks occurred over the study period: 2004, 2009/2010 and 2011. Measles IgM positivity ranged from 22-29% in outbreak years to 5-10% in the intervening years. Age profile analysis revealed that whereas individuals >10 years accounted for only 8% of cases in the 2004 outbreak, this increased to 33% and 29% in the 2009/2010 and 2011 outbreaks, respectively. The transmission and also importation events. Clade D viruses were exclusively found circulating in Ireland, with autochthonous transmission of diverse genotype D4 strains associated with large outbreaks across Europe. More recently, genotype D8 was identified and these were associated with importation events. This study provides a comprehensive genetic analysis of circulating measles genotypes in Ireland and discriminated between indigenous and imported viral strains. Notably, an increase in laboratory-confirmed measles cases in the greater than 10 years of age group was seen over the study period. This information is valuable to inform vaccination strategies with a focus on those populations who remain susceptible to measles infection. Copyright © 2014 Elsevier B.V. All rights reserved.
Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

International Nuclear Information System (INIS)

Sun, Z.H.I.; Xiao, Y.; Sietsma, J.; Agterhuis, H.; Visser, G.; Yang, Y.

2015-01-01

Highlights: • New characterisation methodology has been established to understand an industrially processed ICT waste. • Particle size distribution, composition, thermal–chemical behaviour and occurrence of metals were considered. • The characterisation provides direct guidelines for values recovery from the waste. - Abstract: Recycling of valuable metals from electronic waste, especially complex mixtures of end-of-life information and communication technology (ICT) products, is of great difficulty due to their complexity and heterogeneity. One of the important reasons is the lack of comprehensive characterisation on such materials, i.e. accurate compositions, physical/chemical properties. In the present research, we focus on developing methodologies for the characterisation of metals in an industrially processed ICT waste. The morphology, particle size distribution, compositional distribution, occurrence, liberation as well as the thermo-chemical properties of the ICT waste were investigated with various characterisation techniques, including X-ray Fluorescence Spectrometry (XRF), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy dispersed spectroscopy (EDS). Due to the high heterogeneity of the material, special sample preparation procedures were introduced to minimise the discrepancies during compositional analyses. As a result, a clearer overview of the ICT waste has been reached. This research provides better understanding of the extractability of each metal and improves the awareness of potential obstacles for extraction. It will lead to smarter decisions during further development of a clean and effective recovery process
Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology

Energy Technology Data Exchange (ETDEWEB)

Sun, Z.H.I. [Department of Materials Science and Engineering, TU Delft, 2628 CD Delft (Netherlands); Xiao, Y. [Ironmaking Department, R and D, Tata Steel, 1970 CA IJmuiden (Netherlands); Sietsma, J. [Department of Materials Science and Engineering, TU Delft, 2628 CD Delft (Netherlands); Agterhuis, H.; Visser, G. [Business Development, Van Gansewinkel Groep BV, 5657 DH Eindhoven (Netherlands); Yang, Y. [Department of Materials Science and Engineering, TU Delft, 2628 CD Delft (Netherlands)

2015-01-15

Highlights: • New characterisation methodology has been established to understand an industrially processed ICT waste. • Particle size distribution, composition, thermal–chemical behaviour and occurrence of metals were considered. • The characterisation provides direct guidelines for values recovery from the waste. - Abstract: Recycling of valuable metals from electronic waste, especially complex mixtures of end-of-life information and communication technology (ICT) products, is of great difficulty due to their complexity and heterogeneity. One of the important reasons is the lack of comprehensive characterisation on such materials, i.e. accurate compositions, physical/chemical properties. In the present research, we focus on developing methodologies for the characterisation of metals in an industrially processed ICT waste. The morphology, particle size distribution, compositional distribution, occurrence, liberation as well as the thermo-chemical properties of the ICT waste were investigated with various characterisation techniques, including X-ray Fluorescence Spectrometry (XRF), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy dispersed spectroscopy (EDS). Due to the high heterogeneity of the material, special sample preparation procedures were introduced to minimise the discrepancies during compositional analyses. As a result, a clearer overview of the ICT waste has been reached. This research provides better understanding of the extractability of each metal and improves the awareness of potential obstacles for extraction. It will lead to smarter decisions during further development of a clean and effective recovery process.
On-ground and in-orbit characterisation plan for the PLATO CCD normal cameras

Science.gov (United States)

Gow, J. P. D.; Walton, D.; Smith, A.; Hailey, M.; Curry, P.; Kennedy, T.

2017-11-01

PLAnetary Transits and Ocillations (PLATO) is the third European Space Agency (ESA) medium class mission in ESA's cosmic vision programme due for launch in 2026. PLATO will carry out high precision un-interrupted photometric monitoring in the visible band of large samples of bright solar-type stars. The primary mission goal is to detect and characterise terrestrial exoplanets and their systems with emphasis on planets orbiting in the habitable zone, this will be achieved using light curves to detect planetary transits. PLATO uses a novel multi- instrument concept consisting of 26 small wide field cameras The 26 cameras are made up of a telescope optical unit, four Teledyne e2v CCD270s mounted on a focal plane array and connected to a set of Front End Electronics (FEE) which provide CCD control and readout. There are 2 fast cameras with high read-out cadence (2.5 s) for magnitude ~ 4-8 stars, being developed by the German Aerospace Centre and 24 normal (N) cameras with a cadence of 25 s to monitor stars with a magnitude greater than 8. The N-FEEs are being developed at University College London's Mullard Space Science Laboratory (MSSL) and will be characterised along with the associated CCDs. The CCDs and N-FEEs will undergo rigorous on-ground characterisation and the performance of the CCDs will continue to be monitored in-orbit. This paper discusses the initial development of the experimental arrangement, test procedures and current status of the N-FEE. The parameters explored will include gain, quantum efficiency, pixel response non-uniformity, dark current and Charge Transfer Inefficiency (CTI). The current in-orbit characterisation plan is also discussed which will enable the performance of the CCDs and their associated N-FEE to be monitored during the mission, this will include measurements of CTI giving an indication of the impact of radiation damage in the CCDs.
De determination for young samples using the standardised OSL response of coarse-grain quartz

International Nuclear Information System (INIS)

Burbidge, C.I.; Duller, G.A.T.; Roberts, H.M.

2006-01-01

It has recently been shown that it is possible to construct standardised curves of the sensitivity corrected growth in optically stimulated luminescence (OSL) with exposure to ionising radiation, and that they may be used in the dating of quartz and polymineral samples. Standardised growth curves are particularly advantageous where measurement time is limited, as once they have been defined, only the natural signal and the response to a subsequent test dose are required in order to determine the equivalent dose of a sub-sample. The present study is concerned with the application of the standardised growth curve approach to OSL dating of Holocene age samples. Systematic changes in the shape of the standardised growth curve of coarse-grain quartz are identified as the size of the test dose is varied, because of non-proportionality between the test dose and the luminescence test response. The effect is characterised by fitting the change in gradient of the standardised growth curve as test dose is varied. An equation is defined to describe standardised growth as a function of regenerative dose and test dose. Regenerative dose responses of other samples in this study are treated as unknowns and recovered through different growth curves to compare precision and accuracy of various methods of D e determination. The standardised growth curve is found to yield similar precision to conventional fits of single aliquot regenerative data, but slightly poorer accuracy. The standardised growth curve approach was refined by incorporating the measurement of one regenerative response for each aliquot as well as its natural signal. Measurements of this additional data point for aliquots of 22 samples were used to adjust the standardised growth equation, improving its accuracy. The incorporation of this additional data point also indicated a systematic uncertainty of 2.4% in the estimates of D e
Defining and Classifying Interest Groups

DEFF Research Database (Denmark)

Baroni, Laura; Carroll, Brendan; Chalmers, Adam

2014-01-01

The interest group concept is defined in many different ways in the existing literature and a range of different classification schemes are employed. This complicates comparisons between different studies and their findings. One of the important tasks faced by interest group scholars engaged...... in large-N studies is therefore to define the concept of an interest group and to determine which classification scheme to use for different group types. After reviewing the existing literature, this article sets out to compare different approaches to defining and classifying interest groups with a sample...... in the organizational attributes of specific interest group types. As expected, our comparison of coding schemes reveals a closer link between group attributes and group type in narrower classification schemes based on group organizational characteristics than those based on a behavioral definition of lobbying....
Lipid and liver abnormalities in haemoglobin A1c-defined prediabetes and type 2 diabetes

DEFF Research Database (Denmark)

Calanna, S; Scicali, R; Di Pino, A

2014-01-01

BACKGROUND AND AIMS: We aimed to investigate lipid abnormalities and liver steatosis in patients with HbA1c-defined prediabetes and type 2 diabetes compared to individuals with HbA1c-defined normoglycaemia. METHODS AND RESULTS: Ninety-one subjects with prediabetes according to HbA1c, i.e. from 5...... of the liver, and BARD (body mass index, aspartate aminotransferase/alanine aminotransferase ratio, diabetes) score for evaluation of liver fibrosis, were performed in all subjects. In comparison to controls, subjects with prediabetes were characterised by: lower apolipoprotein AI and HDL cholesterol levels......, higher blood pressure, triglycerides levels and apolipoprotein B/apolipoprotein AI ratio, higher FLI, increased prevalence of and more severe hepatic steatosis, similar BARD score, and higher total body fat mass. In comparison to subjects with diabetes, subjects with prediabetes exhibited: similar blood...
Characterisation of lead-calcium alloys ageing in anisothermal conditions by calorimetric, resistance and hardness in-situ measurements

Energy Technology Data Exchange (ETDEWEB)

Rossi, F.; Lambertin, M. [Arts et Metiers ParisTech, LaBoMaP, Cluny (France); Delfaut-Durut, L. [CEA, Centre de Valduc, (SEMP, LECM), Is-sur-Tille (France); Maitre, A. [SPCTS, UFR Sciences et techniques, Limoges (France); Vilasi, M. [LCSM, Univ. Nancy I, Vandoeuvre les Nancy (France)

2010-02-15

Transformations undergone by lead-calcium alloys are numerous and have different kinetics from a few minutes to a few years. Anisothermal calorimetric measurements were performed to be able to identify these transformations quickly. It was then possible to identify five transformations. Complementary measurements have enabled us to define transformations with an in-situ electrical resistance measurement to follow the evolution of the calcium in solid solution and with an in-situ hardness measurement to characterise the mechanical properties. The aim of these results is to simulate the ageing and overageing of the alloy in isothermal conditions. (orig.)
Structural characterisation of oxygen diffusion hardened alpha-tantalum PVD-coatings on titanium.

Science.gov (United States)

Hertl, C; Koll, L; Schmitz, T; Werner, E; Gbureck, U

2014-08-01

Titanium substrates were coated with tantalum layers of 5 μm thickness using physical vapour deposition (PVD). The tantalum layers showed a (110)-preferred orientation. The coated samples were hardened by oxygen diffusion. Using X-ray diffraction the crystallographic structure of the tantalum coatings was characterised, comparing untreated and diffusion hardened specimen conditions. Oxygen depth profiles were determined by glow discharge spectrometry. The hardening effect of the heat treatment was examined by Vickers microhardness testing. The increase of surface hardness caused by oxygen diffusion was at least 50%. Copyright © 2014 Elsevier B.V. All rights reserved.
OECD/NEA Radiological characterisation in decommissioning - Evaluation of questionnaire. Strategies for Radiological Characterisation used by Decommissioning Projects in OECD Countries

International Nuclear Information System (INIS)

Thierfeldt, Stefan; Haneke, K.

2012-01-01

In the first half of 2011, the Radiological Characterization and Decommissioning Task Group (RCD) of the WPDD of the OECD/NEA has prepared a questionnaire on the characterisation of nuclear facilities that has been circulated among nuclear installations in various OECD countries. The aim of this questionnaire was to gather information on the approaches and methods that are used for radiological characterisation (RC) for systems and components, for buildings and for sites (land), on domestic and international guidance and regulations that govern RC, and on the experience with RC that is already available in the particular country. The number of responses to this questionnaire that were received in the second half of 2011 was very satisfactory, so that a broad overview is now available from the following countries: Belgium, Canada, Denmark, Finland, France, Germany, Japan, Korea, Spain, Sweden, and United Kingdom. The presentation deals with the results that were obtained from the evaluation of these questionnaires and gives overviews of the objectives of characterisation, the input data for planning of characterisation, the measurement techniques that were used for metallic structures and components, for buildings and for sites, the data management and QA measures, the obstacles that were encountered, the experience with availability of as-built plans, the regulatory framework and guidelines, and the costs for RC. All information on RC is further broken down with respect to the operational phase (where RC is used for preliminary decommissioning planning), the transition phase (where RC supports decommissioning planning) and the actual decommissioning phase (where RC is needed for dismantling, decontamination and treatment of systems, components, buildings etc.). The presentation also offers conclusions on these subjects. (authors)
Characterisation of a Sr-90 based electron monochromator

CERN Document Server

Arfaoui, S; CERN; Casella, C; ETH Zurich

2015-01-01

This note describes the characterisation of an energy filtered Sr-90 source to be used in laboratory studies that require Minimum Ionising Particles (MIP) with a kinetic energy of up to approx. 2 MeV. The energy calibration was performed with a LYSO scintillation crystal read out by a digital Silicon Photomultiplier (dSiPM). The LYSO/dSiPM set-up was pre-calibrated using a Na-22 source. After introducing the motivation behind the usage of such a device, this note presents the principle and design of the electron monochromator as well as its energy and momentum characterisation.
Sampling and characterisation of groundwater colloids in ONKALO at Olkiluoto, Finland in 2007

International Nuclear Information System (INIS)

Takala, M.; Manninen, P.

2008-08-01

Colloid samples were collected from ONKALO groundwater station ONK-PVA1 in October 2007 and an additional sample was taken from groundwater station ONK-PVA3 in November 2007. The colloids were collected by filtering the groundwater on site with an Anopore 0.02 μm aluminium oxide filter. In the sampling in October, water samples were also collected to analyse the differences in the water chemistry before and after filtration. The water samples were freeze-dried so that the elements would be concentrated in the water. The colloid concentrations were determined by counting the particles from the SEM micrographs and by calculating the concentration using the micrograph area, the filter area and the filtered volume. The colloid concentration in ONK-PVA1 was very low. The particle concentration within the size range from 0.1 μm to 1 μm was 1.6 x 10 4 pt/L and the mass concentration within the same size range 0.001 μg/L. Owing to the very low concentration, an additional colloid sample was taken from ONK-PVA3. The colloid concentration in ONK-PVA3 within the size range from 0.1 μm to 1 μm was 8.2 x 10 7 pt/L and the mass concentration 0.013 mg/L. When studying the ONKALO groundwater monitoring data it was noticed that in the samples where the colloid concentration was elevated also the sodium fluorescein concentration was probably elevated. This indicated that process water (e.g. drilling water) was present in the water samples. The ONK-PVA1 water probably also contained process water during the colloid sampling performed in 2006. The composition of the colloid phase could not be determined by analysing the differences in the filtered and unfiltered water owing to the low colloid concentration. Furthermore, the aluminium oxide filter caused aluminium contamination. (orig.)
Characterisation of a low pathogenic form of Gyrodactylus salaris from rainbow trout

DEFF Research Database (Denmark)

Jørgensen, Thomas Rohde; Larsen, Thomas Bjerre; Jørgensen, Louise von Gersdorff

2007-01-01

A Danish form of Gyrodactylus salaris has been isolated and characterised. It is not pathogenic to Atlantic salmon.......A Danish form of Gyrodactylus salaris has been isolated and characterised. It is not pathogenic to Atlantic salmon....
Detailed Electrochemical Characterisation of Large SOFC Stacks

DEFF Research Database (Denmark)

Mosbæk, Rasmus Rode; Hjelm, Johan; Barfod, R.

2012-01-01

application of advanced methods for detailed electrochemical characterisation during operation. An operating stack is subject to steep compositional gradients in the gaseous reactant streams, and significant temperature gradients across each cell and across the stack, which makes it a complex system...... Fuel Cell A/S was characterised in detail using electrochemical impedance spectroscopy. An investigation of the optimal geometrical placement of the current probes and voltage probes was carried out in order to minimise measurement errors caused by stray impedances. Unwanted stray impedances...... are particularly problematic at high frequencies. Stray impedances may be caused by mutual inductance and stray capacitance in the geometrical set-up and do not describe the fuel cell. Three different stack geometries were investigated by electrochemical impedance spectroscopy. Impedance measurements were carried...
Corrosion product characterisation by fibre optic raman spectroscopy

International Nuclear Information System (INIS)

Guzonas, D.A.; Rochefort, P.A.; Turner, C.W.

1998-01-01

Fibre optic Raman spectroscopy has been used to characterise secondary-side deposits removed from CANDU steam generators. The deposits examined were in the form of powders, millimetre-sized flakes, and deposits on the surfaces of pulled steam generator tubes. The compositions of the deposits obtained using Raman spectroscopy are similar to the compositions obtained using other ex-situ analytical techniques. A semi-quantitative estimate of amounts of the major components can be obtained from the spectra. It was noted that the signal-to-noise ratio of the Raman spectra decreased as the amount of magnetite in the deposit increased, as a result of absorption of the laser light by the magnetite. The conversion of magnetite to hematite by the laser beam was observed when high laser powers were used. The Raman spectra of larger flake samples clearly illustrate the inhomogeneous nature of the deposits. (author)

Radiological characterisation experience with Magnox reactors

International Nuclear Information System (INIS)

Westall, Bill A.; Towton, Barbara

2012-01-01

At the end of generation, power reactors will be decommissioned. Whether decommissioning is prompt or deferred, knowledge of the radioactive inventory of plant and structures is needed to develop and underpin the decommissioning strategy. As decommissioning progresses the level of detail required for the radioactive inventory increases as more specific and detailed questions need answering. Failure to adequately characterise will result in increased costs and project overruns due to missing optimal solutions, over pessimistic assumptions or unforeseen problems and regulatory issues. Radiological characterisation for decommissioning of Magnox power stations in the UK has been in progress for over a quarter of a century. Firstly measurements and calculations were carried out to develop a strategy. These have been followed by measurements to determine radioactive inventories of waste streams and packages or to allow decontamination of structures and most recently for partial de-licensing of sites. Some examples of the work carried out for the Magnox stations will be given, ranging from the neutron activation calculations to estimate the radioactive inventory within a bio-shield and measurements to validate them. Various plant and structures where the radioactive inventory is due to contamination have been characterised by measurements and examples for boilers and cooling ponds will be discussed. Various routine and ad-hoc measurements and shielding assessments have been performed on waste forms to help satisfy conditions for acceptance for disposal or exemption, which will be reviewed. Finally the measurements for de-licensing and the successful application of Data Quality Objectives will be addressed. (authors)
Characterisation of DLC films deposited using titanium isopropoxide (TIPOT) at different flow rates.

Science.gov (United States)

Said, R; Ali, N; Ghumman, C A A; Teodoro, O M N D; Ahmed, W

2009-07-01

In recent years, there has been growing interest in the search for advanced biomaterials for biomedical applications, such as human implants and surgical cutting tools. It is known that both carbon and titanium exhibit good biocompatibility and have been used as implants in the human body. It is highly desirable to deposit biocompatible thin films onto a range of components in order to impart biocompatibility and to minimise wear in implants. Diamond like carbon (DLC) is a good candidate material for achieving biocompatibility and low wear rates. In this study, thin films of diamond-like-carbon DLC were deposited onto stainless steel (316) substrates using C2H2, argon and titanium isopropoxide (TIPOT) precursors. Argon was used to generate the plasma in the plasma enhanced vapour deposition (PECVD) system. A critical coating feature governing the performance of the component during service is film thickness. The as-grown films were in the thickness range 90-100 nm and were found to be dependent on TIPOT flow rate. Atomic force microscopy (AFM) was used to characterise the surface roughness of the samples. As the flow rate of TIPOT increased the average roughness was found to increase in conjunction with the film thickness. Raman spectroscopy was used to investigate the chemical structure of amorphous carbon matrix. Surface tension values were calculated using contact angle measurements. In general, the trend of the surface tension results exhibited an opposite trend to that of the contact angle. The elemental composition of the samples was characterised using a VG ToF SIMS (IX23LS) instrument and X-ray photoelectron spectroscopy (XPS). Surprisingly, SIMS and XPS results showed that the DLC samples did not show evidence of titanium since no peaks representing to titanium appeared on the SIMS/XPS spectra.
Characterisation of the early stages of solute clustering in 1Ni-1.3Mn welds containing Cu

Energy Technology Data Exchange (ETDEWEB)

Hyde, J.M., E-mail: jonathan.hyde@materials.ox.ac.uk [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); National Nuclear Laboratory Ltd, B168 Harwell, Didcot, Oxon OX11 0QJ (United Kingdom); Burke, M.G. [Bechtel Bettis Inc., 814 Pittsburgh-McKeesport Blvd, West Mifflin, Pittsburgh 15122-0079 (United States); Boothby, R.M.; English, C.A. [National Nuclear Laboratory Ltd, B168 Harwell, Didcot, Oxon OX11 0QJ (United Kingdom)

2009-04-15

Microstructural characterisation of neutron irradiated low alloy steels is important for developing mechanistic understanding of irradiation embrittlement. This work is focused on the early stages of irradiation-induced clustering in a low Cu (0.03 wt%), high Ni ({approx}1 wt%) weld. The weld was irradiated at a very high dose rate and then examined by atom probe (energy-compensated position-sensitive atom probe (ECOPoSAP) and local electrode atom probe (LEAP)) with supporting microstructural information obtained by small angle neutron scattering (SANS) and positron annihilation (PALA). It was demonstrated that extreme care must be taken optimising parameters used to characterise the extent of clustering. This is particularly important during the early stages of irradiation-damage when the clusters are poorly defined and significant compositional variations are present in what is traditionally described as matrix. Analysis of the irradiated materials showed increasing clustering of Cu, Mn, Ni and Si with dose. In the low Cu steel the results showed that initially the irradiation damage results in clustering of Mn, Ni and Si, but at very high doses, at very high dose rates, redistribution of Si is significantly more advanced than that for Mn and Ni.
Rabies in Iraq: trends in human cases 2001-2010 and characterisation of animal rabies strains from Baghdad.

Directory of Open Access Journals (Sweden)

Daniel L Horton

Full Text Available Control of rabies requires a consistent supply of dependable resources, constructive cooperation between veterinary and public health authorities, and systematic surveillance. These are challenging in any circumstances, but particularly during conflict. Here we describe available human rabies surveillance data from Iraq, results of renewed sampling for rabies in animals, and the first genetic characterisation of circulating rabies strains from Iraq. Human rabies is notifiable, with reported cases increasing since 2003, and a marked increase in Baghdad between 2009 and 2010. These changes coincide with increasing numbers of reported dog bites. There is no laboratory confirmation of disease or virus characterisation and no systematic surveillance for rabies in animals. To address these issues, brain samples were collected from domestic animals in the greater Baghdad region and tested for rabies. Three of 40 brain samples were positive using the fluorescent antibody test and hemi-nested RT-PCR for rabies virus (RABV. Bayesian phylogenetic analysis using partial nucleoprotein gene sequences derived from the samples demonstrated the viruses belong to a single virus variant and share a common ancestor with viruses from neighbouring countries, 22 (95% HPD 14-32 years ago. These include countries lying to the west, north and east of Iraq, some of which also have other virus variants circulating concurrently. These results suggest possible multiple introductions of rabies into the Middle East, and regular trans-boundary movement of disease. Although 4000 years have passed since the original description of disease consistent with rabies, animals and humans are still dying of this preventable and neglected zoonosis.
Synthesis and characterisation of doxorubicin-loaded functionalised ...

African Journals Online (AJOL)

that it modified the CFNP surface from hydrophobic to hydrophilic. VSM analysis ... characterisation of. XG-coated. CFNPs ..... nanoparticles display a characteristic plasmon resonance .... coating method and its application to grow thin films of.
Trace elemental characterisation of different Indian tea samples by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Lagad, Rupali A.; Alamelu, D.; Aggarwal, S.K.; Acharya, R.

2010-01-01

Determination of elemental content of different food materials is of importance since excess or deficiency of some of the elements have direct consequence to health of human beings. Tea is a common beverage consumed widely in India. India is one of the major country where good quality tea is produced. The tea plants are grown over a wide region of the country. It was of interest to study the elemental composition in tea samples from different geographical locations and to develop a suitable methodology to identify the geographical origin from the trace element profiles. With this objective, about 40 tea samples (both from plantations as well as from market) from the different locations in India viz. Assam, Munnar, Himachal Pradesh and Darjeeling were analyzed by INAA. About 150 mg of each of the sample packed in aluminium foil was irradiated in the self serve position of CIRUS reactor, BARC, for 3 to 5 hours at a neutron flux of ∼10 13 cm -2 s -1 . Along with the samples, Certified Reference Materials (CRMs) GBS-7(Tea leaves, as reference standard) and SRM-1515 (Apple leaves as control sample) were irradiated. Radioactive assay of the irradiated samples were carried out using a 40% relative efficiency HPGe detector coupled to 8K MCA and gamma-ray spectra were recorded for sufficient time for obtaining good counting statistics. Peak areas were determined using a peak-fit software PHAST. Concentrations of the different elements in tea samples were determined using relative method of INAA
Characterisation of gaharu hydrosol: Physical, chemical and microbiological properties

International Nuclear Information System (INIS)

Nur Humaira Lau Abdullah; Salmah Moosa

2010-01-01

Gaharu hydrosol is produced during the hydro distillation of resinous wood part of Aquilaria sp. This aromatic water is being considered as a by-product in the industry. There is interest to turn this aromatic by-product into aroma therapy products. The present study is carried out in order to understand the properties of gaharu hydrosol, physically, chemically and microbiologically. Gaharu hydrosol from two different extraction facilities for example at Kedaik Agar wood Sdn. Bhd. and Malaysian Nuclear Agency were characterised in this study. All the gaharu hydrosol samples displayed acidic nature, with pH in the range of 3.62 - 4.53. Four antioxidant assays were carried out to ascertain the antioxidant capabilities of two gaharu hydrosol samples through the total phenolic content assay, ABTS + radical scavenging activity, DPPH· radical scavenging activity and ferric reducing activity (FRAP). The results revealed that the samples exhibited lower antioxidant capabilities as compared to the positive control. For microbial population study, fungi was not present in the samples as there was no growth observed on the Plate Sabouraud Dextrose Agar (SDA) using membrane filtration technique. The antibacterial activity of the gaharu hydrosol against Staphylococcus aureus and Pseudomonas aeruginosa was determined using agar dilution method and disk diffusion method. The results showed that the gaharu hydrosol did not inhibit the growth of both the bacteria. The results obtained from this study will be further evaluated for the development of new products using this aromatic gaharu by-product. (author)
Trace element characterisation and purification of quartz powder of Indian origin

International Nuclear Information System (INIS)

Dash, K.; Thangavel, S.; Dhavile, S.M.; Sahayam, A.C.; Chaurasia, S.C.

2002-11-01

Analytical methodologies for the trace element characterisation and purification of quartz powder of Indian origin have been described. Metallic impurities (11 elements) in ∼700 quartz samples have been analysed using different instrumental techniques. The values are cross-validated by American and British analytical laboratories. A special multi channel vapour phase digestion (MCVPD) chamber has been designed to reduce the process blank levels for the determination of ultra trace impurities in high purity silicon matrix. In this vessel 21 samples can be digested at a time in a period of 8 hrs. at normal pressure and low temperature (∼ 80 degC). Analytical methodologies for the determination of non-metals (phosphorus, boron and chloride) at very low levels <1 ppm) have also been described. A highly cost effective, single step, room temperature purification procedure is developed based on chemical leaching. Around 300 raw quartz powders (3-4N) from various mines have been purified to 5N pure ( optical grade ). (author)
Porosity, permeability and 3D fracture network characterisation of dolomite reservoir rock samples.

Science.gov (United States)

Voorn, Maarten; Exner, Ulrike; Barnhoorn, Auke; Baud, Patrick; Reuschlé, Thierry

2015-03-01

With fractured rocks making up an important part of hydrocarbon reservoirs worldwide, detailed analysis of fractures and fracture networks is essential. However, common analyses on drill core and plug samples taken from such reservoirs (including hand specimen analysis, thin section analysis and laboratory porosity and permeability determination) however suffer from various problems, such as having a limited resolution, providing only 2D and no internal structure information, being destructive on the samples and/or not being representative for full fracture networks. In this paper, we therefore explore the use of an additional method - non-destructive 3D X-ray micro-Computed Tomography (μCT) - to obtain more information on such fractured samples. Seven plug-sized samples were selected from narrowly fractured rocks of the Hauptdolomit formation, taken from wellbores in the Vienna basin, Austria. These samples span a range of different fault rocks in a fault zone interpretation, from damage zone to fault core. We process the 3D μCT data in this study by a Hessian-based fracture filtering routine and can successfully extract porosity, fracture aperture, fracture density and fracture orientations - in bulk as well as locally. Additionally, thin sections made from selected plug samples provide 2D information with a much higher detail than the μCT data. Finally, gas- and water permeability measurements under confining pressure provide an important link (at least in order of magnitude) towards more realistic reservoir conditions. This study shows that 3D μCT can be applied efficiently on plug-sized samples of naturally fractured rocks, and that although there are limitations, several important parameters can be extracted. μCT can therefore be a useful addition to studies on such reservoir rocks, and provide valuable input for modelling and simulations. Also permeability experiments under confining pressure provide important additional insights. Combining these and
Imaging spectroscopy for characterisation of grass swards

NARCIS (Netherlands)

Schut, A.G.T.

2003-01-01

Keywords: Imaging spectroscopy, imaging spectrometry, remote sensing, reflection, reflectance, grass sward, white clover, recognition, characterisation, ground cover, growth monitoring, stress detection, heterogeneity quantification
The potential of imaging spectroscopy as a tool for
KKS:The new power plant characterisation system in practice

International Nuclear Information System (INIS)

Becker, G.; Bohr, E.; Wildberg, D.

1982-01-01

These use of the new power plant characterisation system (KKS) in power plant operation is discussed. KKS intends to ensure reliable characterisation of plant components. It must be read, interpreted, communicated directly or by telephone and written down. An analysis under the aspects of information psychology and ergonomy has shown that the findings of ergonomy and information psychology have hardly been considerd in the design of KKS. The conclusions of this analysis are investigated with regard to their consequences for KKS application in power plant operation. Possibilities of improvement are discussed. (orig./HP) [de
Electrical Characterisation of electron beam exposure induced Defects in silicon

Energy Technology Data Exchange (ETDEWEB)

Danga, Helga T., E-mail: helga.danga@up.ac.za; Auret, Francois D.; Coelho, Sergio M.M.; Diale, Mmantsae

2016-01-01

The defects introduced in epitaxially grown p-type silicon (Si) during electron beam exposure were electrically characterised using deep level transient spectroscopy (DLTS) and high resolution Laplace-DLTS. In this process, Si samples were first exposed to the conditions of electron beam deposition (EBD) without metal deposition. This is called electron beam exposure (EBE) herein. After 50 minutes of EBE, nickel (Ni) Schottky contacts were fabricated using the resistive deposition method. The defect level observed using the Ni contacts had an activation energy of H(0.55). This defect has an activation energy similar to that of the I-defect. The defect level is similar to that of the HB4, a boron related defect. DLTS depth profiling revealed that H(0.55) could be detected up to a depth of 0.8 μm below the junction. We found that exposing the samples to EBD conditions without metal deposition introduced a defect which was not introduced by the EBD method. We also observed that the damage caused by EBE extended deeper into the material compared to that caused by EBD.
Characterisation of aerosols produced by laser cutting

International Nuclear Information System (INIS)

Fauvel, S.; Pilot, G.; Dinechin, G. de; Gosse, X.; Arnaud, P.

2007-01-01

Powerful lasers represent a promising alternative solution to traditional cutting processes used in dismantling nuclear equipments. The use of optical fibers has an unquestionable advantage when dealing with airtight workshops. A study funded by COGEMA Marcoule was undertaken by IRSN/SERAC in collaboration with GIP/GERAILP in order to characterise the aerosols emitted by the cutting of evaporators elements with a 4 kW continuous wave Nd:YAG laser. For this study, laser cutting has been carried out in a tight room of 35 m 3 connected to a particle sampling pipe. Iso-kinetic samplers allowed the measurement of the aerosol concentration. A diffusional and inertial spectrometer (SDI 2001) - an Andersen impinger coupled to a diffusion battery - provided the size distribution. An electrostatic filter used upstream a HEPA filter, itself placed before the extractor fan, collected the majority of the emitted aerosol. Its efficiency was measured and controlled throughout the experiments. The results show the influence of the cutting conditions on the characteristics of the aerosol, and allow a comparison with other cutting tools. (authors)
Defining Tiger Parenting in Chinese Americans.

Science.gov (United States)

Kim, Su Yeong

2013-09-01

"Tiger" parenting, as described by Amy Chua [2011], has instigated scholarly discourse on this phenomenon and its possible effects on families. Our eight-year longitudinal study, published in the Asian American Journal of Psychology [Kim, Wang, Orozco-Lapray, Shen, & Murtuza, 2013b], demonstrates that tiger parenting is not a common parenting profile in a sample of 444 Chinese American families. Tiger parenting also does not relate to superior academic performance in children. In fact, the best developmental outcomes were found among children of supportive parents. We examine the complexities around defining tiger parenting by reviewing classical literature on parenting styles and scholarship on Asian American parenting, along with Amy Chua's own description of her parenting method, to develop, define, and categorize variability in parenting in a sample of Chinese American families. We also provide evidence that supportive parenting is important for the optimal development of Chinese American adolescents.
Sample preparation and EFTEM of Meat Samples for Nanoparticle Analysis in Food

International Nuclear Information System (INIS)

Lari, L; Dudkiewicz, A

2014-01-01

Nanoparticles are used in industry for personal care products and the preparation of food. In the latter application, their functions include the prevention of microbes' growth, increase of the foods nutritional value and sensory quality. EU regulations require a risk assessment of the nanoparticles used in foods and food contact materials before the products can reach the market. However, availability of validated analytical methodologies for detection and characterisation of the nanoparticles in food hampers appropriate risk assessment. As part of a research on the evaluation of the methods for screening and quantification of Ag nanoparticles in meat we have tested a new TEM sample preparation alternative to resin embedding and cryo-sectioning. Energy filtered TEM analysis was applied to evaluate thickness and the uniformity of thin meat layers acquired at increasing input of the sample demonstrating that the protocols used ensured good stability under the electron beam, reliable sample concentration and reproducibility
Sample preparation and EFTEM of Meat Samples for Nanoparticle Analysis in Food

Science.gov (United States)

Lari, L.; Dudkiewicz, A.

2014-06-01

Nanoparticles are used in industry for personal care products and the preparation of food. In the latter application, their functions include the prevention of microbes' growth, increase of the foods nutritional value and sensory quality. EU regulations require a risk assessment of the nanoparticles used in foods and food contact materials before the products can reach the market. However, availability of validated analytical methodologies for detection and characterisation of the nanoparticles in food hampers appropriate risk assessment. As part of a research on the evaluation of the methods for screening and quantification of Ag nanoparticles in meat we have tested a new TEM sample preparation alternative to resin embedding and cryo-sectioning. Energy filtered TEM analysis was applied to evaluate thickness and the uniformity of thin meat layers acquired at increasing input of the sample demonstrating that the protocols used ensured good stability under the electron beam, reliable sample concentration and reproducibility.
Characterisation of long-lived low and intermediate-level radioactive wastes in the Nordic Countries

International Nuclear Information System (INIS)

Broden, K.; Carugati, S.; Brodersen, K.; Carlsson, T.; Viitanen, P.; Walderhaug, T.; Sneve, M.; Hornkjoel, S.; Backe, S.

1997-11-01

The present report is final report from a study on characterisation of radioactive waters in the Nordic countries. The study has mainly been focused on long-lived low and intermediate level radioactive waste. Methods to measure or estimate the activity content and the general composition are discussed. Recommendations are given regarding characterisation of waste under treatment and characterisation of already produced waste packages. (au)
Characterisation of long-lived low and intermediate-level radioactive wastes in the Nordic Countries

Energy Technology Data Exchange (ETDEWEB)

Broden, K. [Studsvik RadWaste AB, (El Salvador); Carugati, S.; Brodersen, K. [Forskningscenter Risoe, (Denmark); Carlsson, T.; Viitanen, P. [VVT, (Finland); Walderhaug, T. [Icelandic Radiation Protection Institute (Iceland); Sneve, M.; Hornkjoel, S. [Norwegian Radiation Protection Authority (Norway); Backe, S. [Institute for Energy Technology (Norway)

1997-11-01

The present report is final report from a study on characterisation of radioactive waters in the Nordic countries. The study has mainly been focused on long-lived low and intermediate level radioactive waste. Methods to measure or estimate the activity content and the general composition are discussed. Recommendations are given regarding characterisation of waste under treatment and characterisation of already produced waste packages. (au).
Sampling and analysis of groundwater colloids. A literature review

International Nuclear Information System (INIS)

Takala, M.; Manninen, P.

2006-03-01

The purpose of this literature study was to give basic information of colloids: their formation, colloid material, sampling and characterisation of groundwater colloids. Colloids are commonly refereed to as particles in the size range of 1 nm to 1000 nm. They are defined as a suspension of solid material in a liquid that does not appear to separate even after a long period of time. Colloids can be formed from a variety of inorganic or organic material. Inorganic colloids in natural groundwaters are formed by physical fragmentation of the host rock or by precipitation. The water chemistry strongly controls the stability of colloids. The amount of colloid particles in a solution tends to decrease with the increasing ionic strength of the solution. Increases in pH and organic material tend to increase the stability of colloids. The mobility of colloids in a porous medium is controlled mainly by groundwater movement, sedimentation, diffusion and interception. Factors controlling sampling artefacts are oxygen diffusion: leads to e.g. calcite precipitation, pumping rates and filtering techniques. Efforts to minimise artefact formation should be taken if the scope of the sampling programme is to study the colloid particles. The colloid phase size distribution can be determined by light scattering systems, laser induced break down or by single particle analysis using SEM micrographs. Elemental compositions can be analysed with EDS spectrometry from single colloid particles. Bulk compositions of the colloid phase can be analysed with e.g. ICP-MS analyser. The results of this study can be used as guidelines for groundwater colloid samplings. Recommendations for future work are listed in the conclusions of this report. (orig.)
Physico-chemical characterisation of some samples of fresh milk and milk powder

Directory of Open Access Journals (Sweden)

Soceanu Alina

2015-12-01

Full Text Available Milk consumption is important in the diet of all age groups because it provides important nutrients that are essential for humans. Children are the largest consumers of milk, thus, it’s very important that milk is free of toxic compounds that can be harmful for humans. Aim of the study was to determine the physico-chemical characteristics of some samples of milk powder for different stage of baby growing and for some samples of fresh milk: raw cow’s milk, milk trade and UHT type. The following physico-chemical properties: density, pH, acidity, the presence of acetone, enzymes, antiseptics, dry substance, the ash, total fat, saponification and peroxide index, total nitrogen and protein content were determined. Comparing the values of acidity for analyzed samples it can be concluded that the powder milk acidity value is much lower than the fresh milk. The presence of antiseptics and acetone was not identified, and amylase and peroxidase were found only in raw cow's milk. The highest protein content was found for milk powder (27.22%.

Defining clusters in APT reconstructions of ODS steels.

Science.gov (United States)

Williams, Ceri A; Haley, Daniel; Marquis, Emmanuelle A; Smith, George D W; Moody, Michael P

2013-09-01

Oxide nanoclusters in a consolidated Fe-14Cr-2W-0.3Ti-0.3Y₂O₃ ODS steel and in the alloy powder after mechanical alloying (but before consolidation) are investigated by atom probe tomography (APT). The maximum separation method is a standard method to define and characterise clusters from within APT data, but this work shows that the extent of clustering between the two materials is sufficiently different that the nanoclusters in the mechanically alloyed powder and in the consolidated material cannot be compared directly using the same cluster selection parameters. As the cluster selection parameters influence the size and composition of the clusters significantly, a procedure to optimise the input parameters for the maximum separation method is proposed by sweeping the d(max) and N(min) parameter space. By applying this method of cluster parameter selection combined with a 'matrix correction' to account for trajectory aberrations, differences in the oxide nanoclusters can then be reliably quantified. Copyright © 2012 Elsevier B.V. All rights reserved.
Purification, biochemical, and immunological characterisation of a major food allergen: different immunoglobulin E recognition of the apo- and calcium-bound forms of carp parvalbumin

OpenAIRE

Bugajska-Schrette..., A; Grote, M; Vangelista, L; Valent, P; Sperr, W; Rumpold, H; Pastore, A; Reichelt, R; Valenta, R; Spitzauer, S

2000-01-01

BACKGROUND—Almost 4% of the population suffer from food allergy which is an adverse reaction to food with an underlying immunological mechanism. AIMS—To characterise one of the most frequent IgE defined food allergens, fish parvalbumin. METHODS—Tissue and subcellular distribution of carp parvalbumin was analysed by immunogold electron microscopy and cell fractionation. Parvalbumin was purified to homogeneity, analysed by mass spectrometry and circular dichroism (CD) spectroscopy, and its alle...
Experimental characterisation of Polyethylene Terephthalate (PET) bottle Eco-bricks

International Nuclear Information System (INIS)

Taaffe, Jonathan; O’Sullivan, Seán; Rahman, Muhammad Ekhlasur; Pakrashi, Vikram

2014-01-01

Highlights: • Characterisation of a novel “Eco-brick” by recycling PET bottles and plastic waste. • Eco-bricks have properties for possible uses in construction. • Consistent manufacturing of Eco-bricks demonstrated to be possible. • Weight of Eco-bricks has a nearly linear relationship with mechanical strength. • Light passage and sound reduction potential of Eco-bricks shown to be good. - Abstract: This paper addresses the issue of recycling waste plastic by considering the feasibility of use of Eco-bricks for constructional purposes. The Eco-bricks are formed by packing plastic within Polyethylene Terephthalate (PET) bottles. Guidelines were provided for the construction of Eco-bricks. Experiments were carried out to characterise some of the properties of these bricks. Compression test, sound insulation assessment and light transmission were considered in this regard and compared with traditional construction materials and conditions. Possible applications of Eco-bricks were discussed. The paper presents the first attempt to characterise these bricks and the results encourage future use of them to a significantly wider extent and for various purposes
Comparative quantified tissue characterisation of liver by ultrasound and its density by CT

International Nuclear Information System (INIS)

Zendel, W.; Wakat, P.; Fischer, G.; Treisch, J.; Langer, R.

1989-01-01

A defined region of the right lobe of the liver was measured by grey scale analysis based on similar presets according to a manual input of a Region of Interest (ROI). During 20 days, the livers of healthy subjects were tested by this method in order to test the reproducibility of the results. By prospective studied, the livers of 30 patients were examined by ultrasound and CT regarding the determination of the extent of their fatty liver disease. The value of the density of liver was determined in Hounsfield units (HU). Both methods lead to parameters that characterise the fatty content of the liver. Statistic analysis shows acceptable correlation of both methods. By means of grey scale analysis in ultrasound measurements it it possible to estimate the extent of the fatty content of liver. (orig.) [de
Impedimetric method for physiologically characterisation of fungi

DEFF Research Database (Denmark)

Nielsen, Per Væggemose; Petersen, Karina

1998-01-01

Fungi are playing an important role in the food and pharmaceutical industry today, both as starter cultures, fermentation organisms, and as contaminants. Characterisation of fungal growth is normally time consuming as it includes measurements and study on a wide range of media at different...... temperatures, pH, water activity and atmosphere composition. Nevertheless is it important information in ecophysiological studies, where the growth potential by fungi are related to composition and storage of food. It is therefore of great interest to device a rapid method for characterisation of fungi.......The objective was to determine the growth phases of various fungi using an impedimetric method and compare this with traditional methods using agar plates, in order to determine if this rapid method can replace the traditional method.The method is based on impedimetric assessment of growth on the Bactometer 128...
Characterising the 750 GeV diphoton excess

International Nuclear Information System (INIS)

Bernon, Jérémy; Goudelis, Andreas; Kraml, Sabine; Mawatari, Kentarou; Sengupta, Dipan

2016-01-01

We study kinematic distributions that may help characterise the recently observed excess in diphoton events at 750 GeV at the LHC Run 2. Several scenarios are considered, including spin-0 and spin-2 750 GeV resonances that decay directly into photon pairs as well as heavier parent resonances that undergo three-body or cascade decays. We find that combinations of the distributions of the diphoton system and the leading photon can distinguish the topology and mass spectra of the different scenarios, while patterns of QCD radiation can help differentiate the production mechanisms. Moreover, missing energy is a powerful discriminator for the heavy parent scenarios if they involve (effectively) invisible particles. While our study concentrates on the current excess at 750 GeV, the analysis is general and can also be useful for characterising other potential diphoton signals in the future.
Phenotypic characterisation and molecular polymorphism of ...

African Journals Online (AJOL)

The study of the phenotypic characterisation and molecular polymorphism of local chicken populations was carried out in Benin on 326 chickens of the Forest ecological area and 316 of the Savannah ecological area, all were 7 months old at least. The collection of blood for the molecular typing was achieved on 121 ...
Usefulness of tenderness to characterise fibromyalgia severity in women.

Science.gov (United States)

Aparicio, V A; Carbonell-Baeza, A; Ortega, F B; Estevez, F; Ruiz, J R; Delgado-Fernández, M

2011-01-01

To investigate the usefulness of tenderness (tender points count (TPC) and algometer score) to characterise fibromyalgia (FM) severity and symptomatology in women. The study sample comprised 174 women aged 51±7 years. We ossesse tenderness using pressure algometry; quality of life by means of the Short-Form 36 Health Survey (SF-36) and the Hospital Anxiety and Depression Scale (HADS). We used the FM impact questionnaire (FIQ) to assess FM severity and symptomatology. Patients were categorised according to three FIQ-derived categories: FIQFIQFIQ≥59 (16.9±2 vs. 15.6±4, p=0.02), whereas no differences between groups were observed according to FIQ≥70 (17.0±2 vs. 16.2±3, p=0.12) or FM type (16.8±3 for type II vs. 15.9±4 for type I, p=0.13). We observed a significant association between TPC and FIQ-job difficulty, pain, morning tiredness and stiffness dimensions (all pFIQ, FIQ-anxiety, fatigue and depression dimensions (all p>0.05). Algometer score was lower in the FIQ≥70 (45.7±12 vs. 51.1±14, p=0.05) and FIQ≥59 (46.7±13 vs. 52.7±14, p=0.05) groups, and there were no difference between FM types (48.7±13 vs. 49.5±14 for type II and I respectively, p=0.81). Algometer score was not associated with total score of FIQ or FIQ dimensions (all p≥0.1). Widespread pain and pain hypersensitivity, as measured by TPC and algometer score, do not seem to be useful to characterise FM severity and symptomatology (measured by FIQ) in women.
Autonomous spatially adaptive sampling in experiments based on curvature, statistical error and sample spacing with applications in LDA measurements

Science.gov (United States)

Theunissen, Raf; Kadosh, Jesse S.; Allen, Christian B.

2015-06-01

Spatially varying signals are typically sampled by collecting uniformly spaced samples irrespective of the signal content. For signals with inhomogeneous information content, this leads to unnecessarily dense sampling in regions of low interest or insufficient sample density at important features, or both. A new adaptive sampling technique is presented directing sample collection in proportion to local information content, capturing adequately the short-period features while sparsely sampling less dynamic regions. The proposed method incorporates a data-adapted sampling strategy on the basis of signal curvature, sample space-filling, variable experimental uncertainty and iterative improvement. Numerical assessment has indicated a reduction in the number of samples required to achieve a predefined uncertainty level overall while improving local accuracy for important features. The potential of the proposed method has been further demonstrated on the basis of Laser Doppler Anemometry experiments examining the wake behind a NACA0012 airfoil and the boundary layer characterisation of a flat plate.
Characterisation of polymers, 1

CERN Document Server

Crompton, Roy

2008-01-01

This essential guide to Polymer Characterisation is a complete compendium of methodologies that have evolved for the determination of the chemical composition of polymers. This 478-page book gives an up-to-date and thorough exposition of the state-of-the-art theories and availability of instrumentation needed to effect chemical and physical analysis of polymers. This is supported by approximately 1200 references. Volume 1 covers the methodology used for the determination of metals, non-metals and organic functional groups in polymers, and for the determination of the ratio in which different m
Characterisation of Microstructure of We43 Magnesium Matrix Composites Reinforced with Carbon Fibres

Directory of Open Access Journals (Sweden)

Gryc A.

2016-06-01

Full Text Available In the paper the microstructures of WE43 matrix composites reinforced with carbon fibres have been characterised. The influence of reinforcement type and T6 heat treatment (a solution treatment at 525°C for 8 h, a hot water quench and a subsequent ageing treatment at 250°C for 16 h on microstructure have been evaluated. The light microscope and scanning electron microscope investigations have been carried out. No significant differences in samples reinforced with non-coated textiles have been reported. The substantial changes in sample reinforced with nickel-coated textile have been observed. The segregation of alloying elements to the matrix-reinforcement layer has been identified. The T6 heat treatment caused the appearance of disperse precipitates of β phase, but the process cannot be considered as satisfactory (irregular distribution, low volume fraction, relatively large size.
Definably compact groups definable in real closed fields. I

OpenAIRE

Barriga, Eliana

2017-01-01

We study definably compact definably connected groups definable in a sufficiently saturated real closed field $R$. We introduce the notion of group-generic point for $\\bigvee$-definable groups and show the existence of group-generic points for definably compact groups definable in a sufficiently saturated o-minimal expansion of a real closed field. We use this notion along with some properties of generic sets to prove that for every definably compact definably connected group $G$ definable in...
Workshop on Radiological characterisation for decommissioning - Compilation of abstracts, papers, presentations and posters

International Nuclear Information System (INIS)

2012-01-01

The OECD Nuclear Energy Agency (NEA), in cooperation with Studsvik Nuclear AB, the Swedish Radiation Safety Authority (SSM), Swedish Nuclear Fuel and Waste Management Co (SKB) and AB SVAFO, has arranged a workshop on Radiological characterisation for decommissioning and dismantling. The objective of the workshop was to highlight, examine and discuss strategic issues related to radiological characterisation of nuclear facilities to facilitate their safe and efficient decommissioning. The workshop was a forum for learning about current practices, exchange of experiences of both successful and less successful projects, discussion of best practice and needs for improvement, and development of networks in the area of radiological characterisation, waste management and decommissioning. The workshop was arranged in coordination with an ongoing NEA WPDD project on radiological characterisation for decommissioning. The outcome of the workshop was captured in workshop proceedings and in the final NEA WPDD project report. A three-day programme was planned. A short introduction by representatives from Studsvik and OECD/NEA started the workshop followed by presentations by invited speakers from international organisations. Four topical sessions covered issues relating to Characterisation of materials and systems, Characterisation of rooms and buildings, Characterisation of land and groundwater, Software support, record keeping, quality assurance and logistics. Each session contained 3 - 5 presentations and group discussions. Each session was concluded with a short analysis of the presentations and the outcome of the group discussions. The workshop also held a poster session with topics as above. After the formal closing of the workshop, half a day was dedicated for guided tours at the Studsvik and SVAFO facilities. It was possible to visit waste management facilities, the reactor decommissioning project and materials technology laboratories. This document is the Compilation of
Sampling and characterisation of groundwater colloids in ONKALO at Olkiluoto, Finland, 2011

Energy Technology Data Exchange (ETDEWEB)

Takala, M.; Ojala, S.; Jarvinen, E.; Manninen, P. [Ramboll Finland Oy, Espoo (Finland)

2012-11-15

The purpose of this study was to estimate the concentration of colloids and composition of the colloid phase on the basis of the water chemistry results of filtered and unfiltered water samples and to compare the results with the previous ones. The water samples were collected from groundwater stations ONK-PVA1 and ONK-PVA3 in October 2011. The colloid concentrations were determined from scanning electron microscopy (SEM) micrographs taken from the filters. The change in the water chemistry due to filtration was also analysed. The decrease of element concentrations due to filtration would possibly reflect the composition of the colloid phase. Because the concentration of the colloids is very low, two parallel water samples were analysed five times with an Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) analyser so that the chemical differences between the filtered and unfiltered water could be evaluated. The colloid concentration in ONK-PVA1, determined by the single particle analysis of SEM micrographs, was 6 {mu}g/l while the colloid concentration in ONK-PVA3 was 7 {mu}g/l. The colloid phase composition could not be reliably determined due to the low colloid concentration. (orig.)
Indoor atmospheric corrosion of historical ferrous alloys. System characterisation, mechanisms and modelling discussion

International Nuclear Information System (INIS)

Monnier, J.

2008-12-01

Understanding the mechanisms of indoor atmospheric corrosion in iron alloys is of primary importance in several fields, including for the conservation of Middle Ages monuments or the long term storage of nuclear waste. In this research, a double approach was developed, combining fine characterisation of corrosion systems and design of experiments to answers specific questions related to mechanisms understanding. Iron indoor atmospheric corrosion was investigated on samples coming from the reinforcing chain of the Amiens cathedral (15. century). In the first stage, the corrosion system has been extensively characterised from the macroscopic to the nano-metric scale. In particular, structural micro-analysis (μ-Raman, μ-XRD, μ-XAS) has been used to locate, identify and quantify the oxidised phases. Rust layers are composed of a matrix of nano-metric goethite, with low quantities of lepidocrocite and akaganeite mostly located in the extern part of the corrosion system. In addition, clear marblings are dispersed in the matrix, which are sometimes connected with the metal core. Although these may contain maghemite, these marblings are generally made of ferri-hydrite/feroxyhite phases. In the second stage, specific experiments have been carried out in an unsaturated marked medium to locate oxygen reduction sites in the rust layers. Several cases were evidenced, depending on the rust layer morphology. In addition, reduction processes of model phases have been studied in situ, using an electrochemical cell coupled with structural characterisation techniques. This combination highlighted the influence of reduction mode and pH on the type of reduced phase formed. From the obtained results, several mechanisms are proposed to explain the long term indoor atmospheric corrosion of iron, including rust layers morphology and phases properties. The different hypotheses have been integrated in a proposed method to diagnosis ancient ferrous systems stability. These hypotheses also
Underground characterisation and research facility ONKALO

International Nuclear Information System (INIS)

Ikonen, Antti; Ylae-Mella, Mia; Aeikaes, Timo

2006-01-01

Posiva's repository for geological disposal of the spent fuel from Finnish nuclear reactors will be constructed at Olkiluoto. The selection of Olkiluoto was made based on site selection research programme conducted between 1987-2001. The next step is to carry out complementary investigations of the site and apply for the construction license for the disposal facility. The license application will be submitted in 2012. To collect detailed information of the geological environment at planned disposal depth an underground characterisation and research facility will be built at the site. This facility, named as ONKALO, will comprise a spiral access tunnel and two vertical shafts. The excavation of ONKALO is in progress and planned depth (400 m) will be reached in 2009. During the course of the excavation Posiva will conduct site characterisation activities to assess the structure and other properties of the site geology. The aim is that construction will not compromise the favourable conditions of the planned disposal depth or introduce harmful effects in the surrounding bedrock which could jeopardize the long-term safety of the geological disposal. (author)
Quantitative characterisation of an engineering write-up using random walk analysis

Directory of Open Access Journals (Sweden)

Sunday A. Oke

2008-02-01

Full Text Available This contribution reports on the investigation of correlation properties in an English scientific text (engineering write-up by means of a random walk. Though the idea to use a random walk to characterise correlations is not new (it was used e.g. in the genome analysis and in the analysis of texts, a random walk approach to the analysis of an English scientific text is still far from being exploited in its full strength as demonstrated in this paper. A method of high-dimensional embedding is proposed. Case examples were drawn arbitrarily from four engineering write-ups (Ph.D. synopsis of three engineering departments in the Faculty of Technology, University of Ibadan, Nigeria. Thirteen additional analyses of non-engineering English texts were made and the results compared to the engineering English texts. Thus, a total of seventeen write-ups of eight Faculties and sixteen Departments of the University of Ibadan were considered. The characterising exponents which relate the average distance of random walkers away from a known starting position to the elapsed time steps were estimated for the seventeen cases according to the power law and in three different dimensional spaces. The average characteristic exponent obtained for the seventeen cases and over three different dimensional spaces studied was 1.42 to 2-decimal with a minimum and a maximum coefficient of determination (R2 of 0.9495 and 0.9994 respectively. This is found to be 284% of the average characterising exponent value (0.5, as supported by the literature for random walkers based on the pseudo-random number generator. The average characteristic exponent obtained for the four cases that were engineering-based and over the three different dimensional studied spaces was 1.41 to 2-decimal (closer by 99.3% to 1.42 with a minimum and a maximum coefficient of determination (R2 of 0.9507 and 0.9974 respectively. This is found to be 282% of the average characterising exponent value (0.5, as
FragIdent--automatic identification and characterisation of cDNA-fragments.

Science.gov (United States)

Seelow, Dominik; Goehler, Heike; Hoffmann, Katrin

2009-03-02

Many genetic studies and functional assays are based on cDNA fragments. After the generation of cDNA fragments from an mRNA sample, their content is at first unknown and must be assigned by sequencing reactions or hybridisation experiments. Even in characterised libraries, a considerable number of clones are wrongly annotated. Furthermore, mix-ups can happen in the laboratory. It is therefore essential to the relevance of experimental results to confirm or determine the identity of the employed cDNA fragments. However, the manual approach for the characterisation of these fragments using BLAST web interfaces is not suited for larger number of sequences and so far, no user-friendly software is publicly available. Here we present the development of FragIdent, an application for the automatic identification of open reading frames (ORFs) within cDNA-fragments. The software performs BLAST analyses to identify the genes represented by the sequences and suggests primers to complete the sequencing of the whole insert. Gene-specific information as well as the protein domains encoded by the cDNA fragment are retrieved from Internet-based databases and included in the output. The application features an intuitive graphical interface and is designed for researchers without any bioinformatics skills. It is suited for projects comprising up to several hundred different clones. We used FragIdent to identify 84 cDNA clones from a yeast two-hybrid experiment. Furthermore, we identified 131 protein domains within our analysed clones. The source code is freely available from our homepage at http://compbio.charite.de/genetik/FragIdent/.
Chemical characterisation of zircon-cadmium sulfoselenide ceramic pigments; Caracterizacion quimica de pigmentos ceramicos a base de sulfoseleniuro de cadmio

Energy Technology Data Exchange (ETDEWEB)

Gazulla Barreda, M. F.; Rodrigo Edo, M.; Blasco Roca, E.; Orduna Cordero, M.

2013-07-01

The present paper addresses the development of a methodology that allows the complete chemical characterisation of zircon cadmium sulfoselenide ceramic pigments including minor and major elements. To develop the methodology, five zircon-cadmium sulfoselenide pigments with different hues were selected, studying the different measurement process steps, from sample preparation to the optimisation of the measurement of the different components of the pigments by spectroscopic techniques (WD-XRF and elemental analysis by combustion and IR detection). The chemical characterisation method developed was validated with synthetic standards prepared from the mixture of certified reference materials and pure oxides because no certified referenced materials of this type of pigments were commercially available. The developed method can be used for a complete chemical characterization of zircon-cadmium sulfoselenide ceramic pigments with a very low uncertainty for all the elements analysed. (Author)
Characterisation of bacteria by matrix-assisted laser desorption/ionisation and electrospray mass spectrometry

NARCIS (Netherlands)

Baar, B.L.M. van

2000-01-01

Chemical analysis for the characterisation of micro-organisms is rapidly evolving, after the recent advent of new ionisation methods in mass spectrometry (MS): electrospray (ES) and matrix-assisted laser desorption/ionisation (MALDI). These methods allow quick characterisation of micro-organisms,

Trans-Regional technologies and the Lapita problem: characterisation of volcanic glass inclusions by electron microprobe

International Nuclear Information System (INIS)

Grave, P.; Nockolds, C.; White, P.

1997-01-01

Full text: Analysis of pre-modern pottery of the Pacific has long attempted to formulate measures independent of style for constructing archaeologically meaningful groups. However, the variable character of fabrics and the longevity of production (Lapita and post-Lapita wares from 3000 years ago to the present) have tended to obscure differences due to changes in production practices and resources through time and differences relating to the exchange of ceramics between islands or regions. In this poster we outline a preliminary study that employs an economical and robust technique to distinguish both within- and between-region groups. This is achieved with electron microprobe analysis of small volcanic glass fragments present in wares tempered with volcanic sands, and interpretation based on Principal Components Analysis. The method builds on the chemical groupings for glass from different volcanic complexes in the Pacific established through high energy ion beam (PIXE-PIGME) analysis. The purpose of this study is to characterise a selection of samples of pottery from the Duke of York's peninsula using electron microprobe analysis of very small glass fragments in the sections that ranged in size from around 0.05 mm to 1 mm.. The study involved the identification and elemental characterisation of individual fragments of glass in a section. Principal Component Analysis was used to identify structure latent in the dataset. The results of the study show that clear characterisation is possible to enable the wider application of the technique to Lapita and post Lapita ceramics produced originating in volcanic areas of the Pacific
Dynamic and Acoustic Characterisation of Automotive Wheels

Directory of Open Access Journals (Sweden)

Francesca Curà

2004-01-01

Full Text Available The subject of this paper is the dynamic and acoustic characterisation of an automotive wheel. In particular, an experimental research activity previously performed by the authors about the dynamic behaviour of automotive wheels has been extended to the acoustic field.
Characterisation of potential aquaculture pond effluents, and ...

African Journals Online (AJOL)

Conventional treatment of effluents from these small-scale, low-volume operations, which discharge relatively dilute effluents infrequently, might not be cost-effective. Keywords: aquaculture–environment interaction, earthen ponds, effluent characterisation, K-means clustering, t ilapia, water quality. African Journal of Aquatic ...
Routine instrumental procedures to characterise the mineralogy of modern and ancient silica sinters

Energy Technology Data Exchange (ETDEWEB)

Herdianita, N. Rina [Auckland Univ., Dept. of Geology, Auckland (New Zealand); Institute of Technology, Dept. of Geology, Bandung (Indonesia); Rodgers, Kerry A. [Auckland Univ., Dept. of Geology, Auckland (New Zealand); Australian Museum, Sydney, NSW (Australia); Browne, Patrick R.L. [Auckland Univ., Dept. of Geology, Auckland (New Zealand); Auckland Univ., Geothermal Inst., Auckland (New Zealand)

2000-02-01

Tightly constrained determinative methods can be used to characterise the silica minerals (opal-A, opal-CT, opal-C, quartz, moganite) and physical properties of silica sinters. Optimal X-ray powder diffraction operating parameters indicate silica lattice order/disorder using untreated, dry, <106 {mu}m powders scanned at 0.6deg 2{theta}/min with a step size of 0.01deg from 10-40deg 2{theta} and an internal Si standard. Simultaneous differential thermal and thermogravimetric analysis of 15.0 {+-}0.1 mg sinter samples of <106 {mu}m grain size, at a heating rate of 20degC/min in dry air, identify thermal events associated with dehydration, organic combustion, and changes of state. Where abundant organic matter is present, nitrogen is the preferred atmosphere for thermal analysis. Thermogravimetric-determined water contents of sinters differ from Penfield determinations reflecting the differing nature of the two techniques. Laser Raman microprobe techniques can be used to explore the mineralogy of particular sinter morphologies and habits down to 10 {mu}m diameter. The nature of the silica species present can assist in characterising individual sinter deposits and, combined with textural, density and/or porosity determinations, can lead to a better understanding of the hydrology and palaeohydrology of a geothermal prospect. (Author)
Characterisation of gold from Fiji

OpenAIRE

Naden, Jon; Henney, P.J.

1995-01-01

This is a study of the variation in chemistry and inclusion mineralogy of bedrock and placer gold from Fiji. It forms part of a large project, undertaking gold characterisation from a wide range of geological environments in Ecuador, Zimbabwe, Malaysia and Fiji. The work was carried out under the Overseas Development AdministratiodBritish Geological Survey Technology Development and Research programme (Project R5549) as part of the British Government’s provision of technical...
Cross-genus amplification and characterisation of microsatellite loci ...

African Journals Online (AJOL)

Cross-genus amplification and characterisation of microsatellite loci in the little free tailed bat, Chaerephon pumilus s. l. (Molossidae) from South Eastern Africa. Theshnie Naidoo, Angus Macdonald, Jennifer M Lamb ...
Characterising the disintegration properties of tablets in opaque media using texture analysis.

Science.gov (United States)

Scheuerle, Rebekah L; Gerrard, Stephen E; Kendall, Richard A; Tuleu, Catherine; Slater, Nigel K H; Mahbubani, Krishnaa T

2015-01-01

Tablet disintegration characterisation is used in pharmaceutical research, development, and quality control. Standard methods used to characterise tablet disintegration are often dependent on visual observation in measurement of disintegration times. This presents a challenge for disintegration studies of tablets in opaque, physiologically relevant media that could be useful for tablet formulation optimisation. This study has explored an application of texture analysis disintegration testing, a non-visual, quantitative means of determining tablet disintegration end point, by analysing the disintegration behaviour of two tablet formulations in opaque media. In this study, the disintegration behaviour of one tablet formulation manufactured in-house, and Sybedia Flashtab placebo tablets in water, bovine, and human milk were characterised. A novel method is presented to characterise the disintegration process and to quantify the disintegration end points of the tablets in various media using load data generated by a texture analyser probe. The disintegration times in the different media were found to be statistically different (Pdisintegration times from each other in human versus bovine milk (adjusted P value 0.1685). Copyright © 2015 Elsevier B.V. All rights reserved.
Raw materials resources classification and characterisation for ...

African Journals Online (AJOL)

Raw materials resources classification and characterisation for ceramic tableware production in Nigeria. PSA Irabor. Abstract. No Abstract. Journal of Applied Science, Engineering and Technology Vol. 2(1) 2002: 48-52. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.
Characterisation of bovine epiblast-derived outgrowth colonies

DEFF Research Database (Denmark)

Østrup, Esben; Gjørret, Jakob; Schauser, Kirsten Hallundbæk

2010-01-01

The aim of the present study was to characterise bovine epiblast-derived outgrowth colonies (OCs) with respect to the embryonic origin of their cellular components. Epiblasts were isolated mechanically from bovine Day 12 embryos. Epiblasts were cultured on feeder layers of SNL cells (neomycin...
Sampling, characterisation and processing of solid recovered fuel production from municipal solid waste: An Italian plant case study.

Science.gov (United States)

Ranieri, Ezio; Ionescu, Gabriela; Fedele, Arcangela; Palmieri, Eleonora; Ranieri, Ada Cristina; Campanaro, Vincenzo

2017-08-01

This article presents the classification of solid recovered fuel from the Massafra municipal solid waste treatment plant in Southern Italy in compliancy with the EN 15359 standard. In order to ensure the reproducibility of this study, the characterisation methods of waste input and output flow, the mechanical biological treatment line scheme and its main parameters for each stage of the processing chain are presented in details, together with the research results in terms of mass balance and derived fuel properties. Under this study, only 31% of refused municipal solid waste input stream from mechanical biological line was recovered as solid recovered fuel with a net heating value (NC=HV) average of 15.77 MJ kg -1 ; chlorine content average of 0.06% on a dry basis; median of mercury solid recovered fuel produced meets the European Union standard requirements and can be classified with the class code: Net heating value (3); chlorine (1); mercury (1).
Characterisation of COPD heterogeneity in the ECLIPSE cohort

DEFF Research Database (Denmark)

Agusti, Alvar; Calverley, Peter M A; Celli, Bartolome

2010-01-01

Chronic obstructive pulmonary disease (COPD) is a complex condition with pulmonary and extra-pulmonary manifestations. This study describes the heterogeneity of COPD in a large and well characterised and controlled COPD cohort (ECLIPSE)....
Characterisation of Silicon Pad Diodes

CERN Document Server

Hodson, Thomas Connor

2017-01-01

Silicon pad sensors are used in high luminosity particle detectors because of their excellent timing resolution, radiation tolerance and possible high granularity. The eﬀect of diﬀerent design decisions on detector performance can be investigated nondestructively through electronic characterisation of the sensor diodes. Methods for making accurate measurements of leakage current and cell capacitance are described using both a standard approach with tungsten needles and an automated approach with a custom multiplexer and probing setup.
Killing spinors as a characterisation of rotating black hole spacetimes

International Nuclear Information System (INIS)

Cole, Michael J; Kroon, Juan A Valiente

2016-01-01

We investigate the implications of the existence of Killing spinors in a spacetime. In particular, we show that in vacuum and electrovacuum a Killing spinor, along with some assumptions on the associated Killing vector in an asymptotic region, guarantees that the spacetime is locally isometric to the Kerr or Kerr–Newman solutions. We show that the characterisation of these spacetimes in terms of Killing spinors is an alternative expression of characterisation results of Mars (Kerr) and Wong (Kerr–Newman) involving restrictions on the Weyl curvature and matter content. (paper)
Characterisation of the glass transition of an amorphous drug using modulated DSC.

Science.gov (United States)

Royall, P G; Craig, D Q; Doherty, C

1998-07-01

The use of modulated differential scanning calorimetry (MDSC) as a novel means of characterising the glass transition of amorphous drugs has been investigated, using the protease inhibitor saquinavir as a model compound. In particular, the effects of measuring variables (temperature cycling, scanning period, heating mode) have been examined. Saquinavir samples of known moisture content were examined using a TA Instruments 2920 MDSC at a heating rate of 2 degrees C/min and an amplitude of +/-0.159 degrees C with a period of 30 seconds. These conditions were used to examine the effects of cycling between - 50 degrees C and 150 degrees C. A range of periods between 20 and 50 seconds were then studied. Isothermal measurements were carried out between 85 degrees C and 120 degrees C using an amplitude of +/-0.159 degrees C with a period of 30 seconds. MDSC showed the glass transition of saquinavir (0.98 +/- 0.05%w/w moisture content) in isolation from the relaxation endotherm to give an apparent glass transition temperature of 107.0 degrees C +/- 0.4 degrees C. Subsequent temperature cycling gave reproducible glass transition temperatures of approximately 105 degrees C for both cooling and heating cycles. The enthalpic relaxation peak observed in the initial heating cycle had an additional contribution from a Tg "shift" effect brought about by the difference in response to the glass transition of the total and reversing heat flow signals. Isothermal studies yield a glass transition at 105.9 degrees C +/- 0.1 degrees C. MDSC has been shown to be capable of separating the glass transition of saquinavir from the relaxation endotherm, thereby facilitating measurement of this parameter without the need for temperature cycling. However, the Tg "shift" effect and the number of modulations through the transition should be taken into account to avoid drawing erroneous conclusions from the experimental data. MDSC has been shown to be an effective method of characterising the glass
Characterising atmospheric optical turbulence using stereo-SCIDAR

Science.gov (United States)

Osborn, James; Butterley, Tim; Föhring, Dora; Wilson, Richard

2015-04-01

Stereo-SCIDAR (SCIntillation Detection and Ranging) is a development to the well known SCIDAR method for characterisation of the Earth's atmospheric optical turbulence. Here we present some interesting capabilities, comparisons and results from a recent campaign on the 2.5 m Isaac Newton Telescope on La Palma.
Hydrothermal synthesis and characterisation of amine-templated ...

African Journals Online (AJOL)

Hydrothermal synthesis and characterisation of amine-templated metal phosphate framework. ... The complexes were thermally stable up to 3000C, after which the organic components starts decomposing. The solubility test in a wide spectrum of solvents (at room temperature) showed that the complexes were insoluble in ...
Development and Characterisation of the Imiquimod Poly(2-(2-methoxyethoxyethyl Methacrylate Hydrogel Dressing for Keloid Therapy

Directory of Open Access Journals (Sweden)

Wei-Chih Lin

2017-11-01

Full Text Available The imiquimod-poly(2-(2-methoxyethoxyethyl methacrylate hydrogel (poly(MEO2MA hydrogel dressing was developed for the keloid therapy application. Four groups of the hydrogels, including the imiquimod-poly(MEO2MA hydrogel, crosslinked with 0.2 mol %, 0.4 mol %, 0.6 mol %, and 0.8 mol % of di(ethylene glycol dimethacrylate cross-linker (DEGDMA, were synthesised and characterised for fabricating the imiquimod-poly(MEO2MA hydrogel pad. The lower critical solution temperature (LCST of the poly(MEO2MA hydrogel was measured at approximately 28 °C and was used as a trigger to control the imiquimod loading and release. The loaded amounts of the imiquimod in the poly(MEO2MA hydrogel, crosslinked with 0.2 mol % and 0.8 mol % of DEGDMA, were about 27.4 μg and 14.1 μg per 1 mm3 of the hydrogel, respectively. The imiquimod-release profiles of two samples were characterised in a phosphate buffered saline (PBS solution at 37 °C and the released imiquimod amount were about 45% and 46% of the total loaded imiquimod. The Cell Counting Kit-8 (CCK-8 assay was utilised to analyse the cell viability of keloid fibroblasts cultured on the samples of imiquimod-poly(MEO2MA hydrogel, crosslinked with 0.2 mol % and 0.8 mol % of DEGDMA. There was around a 34% decrease of the cell viabilities after 2 days, compared with the pure-poly(MEO2MA hydrogel samples. Therefore, the developed imiquimod-poly(MEO2MA hydrogel dressing can affect the proliferation of keloid fibroblasts. It should be possible to utilise the hydrogel dressing for the keloid therapy application.
Simplified fate modelling in respect to ecotoxicological and human toxicological characterisation of emissions of chemical compounds

DEFF Research Database (Denmark)

Birkved, Morten; Heijungs, Reinout

2011-01-01

The impact assessment of chemical compounds in Life Cycle Impact Assessment (LCIA) and Environmental Risk Assessment (ERA) requires a vast amount of data on the properties of the chemical compounds being assessed. The purpose of the present study is to explore statistical options for reduction...... of the data demand associated with characterisation of chemical emissions in LCIA and ERA.Based on a USEtox™ characterisation factor set consisting of 3,073 data records, multi-dimensional bilinear models for emission compartment specific fate characterisation of chemical emissions were derived by application...... the independent chemical input parameters from the minimum data set, needed for characterisation in USEtox™, according to general availability, importance and relevance for fate factor prediction.Each approach (63% and 75% of the minimum data set needed for characterisation in USEtox™) yielded 66 meta...
Characterising food environment exposure at home, at work, and along commuting journeys using data on adults in the UK.

Science.gov (United States)

Burgoine, Thomas; Monsivais, Pablo

2013-06-27

Socio-ecological models of behaviour suggest that dietary behaviours are potentially shaped by exposure to the food environment ('foodscape'). Research on associations between the foodscape and diet and health has largely focussed on foodscapes around the home, despite recognition that non-home environments are likely to be important in a more complete assessment of foodscape exposure. This paper characterises and describes foodscape exposure of different types, at home, at work, and along commuting routes for a sample of working adults in Cambridgeshire, UK. Home and work locations, and transport habits for 2,696 adults aged 29-60 were drawn from the Fenland Study, UK. Food outlet locations were obtained from local councils and classified by type - we focus on convenience stores, restaurants, supermarkets and takeaway food outlets. Density of and proximity to food outlets was characterised at home and work. Commuting routes were modelled based on the shortest street network distance between home and work, with exposure (counts of food outlets) that accounted for travel mode and frequency. We describe these three domains of food environment exposure using descriptive and inferential statistics. For all types of food outlet, we found very different foodscapes around homes and workplaces (with overall outlet exposure at work 125% higher), as well as a potentially substantial exposure contribution from commuting routes. On average, work and commuting environments each contributed to foodscape exposure at least equally to residential neighbourhoods, which only accounted for roughly 30% of total exposure. Furthermore, for participants with highest overall exposure to takeaway food outlets, workplaces accounted for most of the exposure. Levels of relative exposure between home, work and commuting environments were poorly correlated. Relying solely on residential neighbourhood characterisation greatly underestimated total foodscape exposure in this sample, with levels of
IAEA Perspectives on Radiological Characterisation

International Nuclear Information System (INIS)

O'Sullivan, Patrick; Ljubenov, Vladan

2012-01-01

Requirements for characterization of radiological and other hazards in nuclear facilities are reflected in the IAEA Safety Standards. WS-R-5, Safety Requirements for Decommissioning of Facilities using Radioactive Material, includes a requirement that 'During the preparation of the final decommissioning plan, the extent and type of radioactive material (irradiated and contaminated structures and components) at the facility shall be determined by means of a detailed characterization survey and on the basis of records collected during the operational period'. The subsidiary Safety Guide WS-G-2.1, Decommissioning of Nuclear Power Plants and Research Reactors, further elaborates that 'A survey of radiological and non-radiological hazards provides an important input for the safety assessment and for implementing a safe approach during the work'. Although the characterisation requirements addressed in the Safety Standards relate primarily to the detailed survey activities undertaken following the shutdown of the facility, it is evident that radiological characterization is of relevance to all major phases of the lifetime of a nuclear facility, including: - the siting phase - baseline surveys are undertaken to determine background radiation levels; - the construction phase - construction materials are retained to support future calculations of radioactivity distributions; - the operational phase - surveys are done regularly, with additional surveys being required following incidents involving plant contamination; - the transition phase - detailed radiological surveys are required to support the development of the final decommissioning plan; and - the closure phase - a final survey of the site and any remaining structures will be needed to support an application for release of the site from regulatory control. In the case of facilities that are already shut down, the main purpose of radiological characterisation is to provide a reliable database of information on the

Impedance Characterisation of the SPS Wire Scanner

CERN Document Server

AUTHOR|(CDS)2091911; Prof. Sillanpää, Mika

As a beam diagnostic tool, the SPS wire scanner interacts with the proton bunches traversing the vacuum pipes of the Super Proton Synchrotron particle accelerator. Following the interaction, the bunches decelerate or experience momentum kicks oﬀ-axis and couple energy to the cavity walls, resonances and to the diagnostic tool, the scanning wire. The beam coupling impedance and, in particular, the beam induced heating of the wire motivate the characterisation and redesign of the SPS wire scanner. In this thesis, we characterise RF-wise the low frequency modes of the SPS wire scanner. These have the highest contribution to the impedance. We measure the cavity modes in terms of resonance frequency and quality factor by traditional measurement techniques and data analysis. We carry out a 4-port measurement to evaluate the beam coupling to the scanning wire, that yields the spectral heating power. If combined with the simulations, one is able to extract the beam coupling impedance and deduce the spectral dissipa...
Methodology for characterisation of glass fibre composite architecture

DEFF Research Database (Denmark)

Hansen, Jens Zangenberg; Larsen, J.B.; Østergaard, R.C.

2012-01-01

of the fibres. The information is used for different analyses to investigate and characterise the fibre architecture. As an example, the methodology is applied to glass fibre reinforced composites with varying fibre contents. The different fibre volume fractions (FVFs) affect the number of contact points per......The present study outlines a methodology for microstructural characterisation of fibre reinforced composites containing circular fibres. Digital micrographs of polished cross-sections are used as input to a numerical image processing tool that determines spatial mapping and radii detection...... fibre, the communal fibre distance and the local FVF. The fibre diameter distribution and packing pattern remain somewhat similar for the considered materials. The methodology is a step towards a better understanding of the composite microstructure and can be used to evaluate the interconnection between...
Isotopic analysis of bullet lead samples

International Nuclear Information System (INIS)

Sankar Das, M.; Venkatasubramanian, V.S.; Sreenivas, K.

1976-01-01

The possibility of using the isotopic composition of lead for the identification of bullet lead is investigated. Lead from several spent bullets were converted to lead sulphide and analysed for the isotopic abundances using an MS-7 mass spectrometer. The abundances are measured relative to that for Pb 204 was too small to permit differentiation, while the range of variation of Pb 206 and Pb 207 and the better precision in their analyses permitted differentiating samples from one another. The correlation among the samples examined has been pointed out. The method is complementary to characterisation of bullet leads by the trace element composition. The possibility of using isotopically enriched lead for tagging bullet lead is pointed out. (author)
Physical and optical characterisation of carbon-silicon layers produced by rapid thermal chemical vapour deposition

International Nuclear Information System (INIS)

McBride, G.M.

1994-04-01

The Quplas II reactor is a novel chemical vapour deposition (CVD) system, which was recently designed and built at The Queen's University of Belfast. The system was intended to produce layers of Silicon (Si) for application in advanced bipolar transistor manufacture. It became clear that the system was capable of depositing novel materials such as Silicon-Carbon (Si-C) films which could have application as the emitter material in heterojunction bipolar transistors (HBT's) formed on silicon substrates. This work focuses mainly on the development of analytical techniques to allow characterisation of the deposited layers of Si-C and permit optimisation of both the process conditions and the deposition system. The techniques that were developed to characterise the Si-C films in terms of their physical and optical properties included: Secondary Ion Mass Spectroscopy (SIMS), X-Ray Diffractometry (XRD), Transmission and Scanning Electron Microscopy (TEM and SEM), Near Infrared (NIR) and Ultraviolet/Visible/Near Infrared (UV/VIS/NIR) Spectroscopy. From assessing the data obtained from the analysis of the samples using the techniques mentioned above, it was possible to characterise the Si-C films in terms of: stoichiometry, crystallinity, degree of oxygen contamination, thickness, optical roughness of the film/air and film/substrate interfaces, and energy bandgap. In the fabrication of Si-C films it was found to be necessary to use low process pressures in order to ensure that the film deposition was slow enough to allow for a more ordered growth process. This led to the formation of polycrystalline Si-C films which had greatly reduced levels of oxygen compared to earlier amorphous films. In addition the polycrystalline Si-C films tended to have optically rough film/air and film/substrate interfaces. For most samples it was possible to obtain the thickness of their Si-C films from their SIMS profiles. Based on the method of interferometry, the thickness of the Si-C films
Field sampling for monitoring migration and defining the areal extent of chemical contamination

International Nuclear Information System (INIS)

Thomas, J.M.; Skalski, J.R.; Eberhardt, L.L.; Simmons, M.A.

1984-11-01

Initial research on compositing, field designs, and site mapping oriented toward detecting spills and migration at commercial low-level radioactive or chemical waste sites is summarized. Results indicate that the significance test developed to detect samples containing high levels of contamination when they are mixed with several other samples below detectable limits (composites), will be highly effective with large sample sizes when contaminant levels frequently or greatly exceed a maximum acceptable level. These conditions of frequent and high contaminant levels are most likely to occur in regions of a commercial waste site where the priors (previous knowledge) about a spill or migration are highest. Conversely, initial investigations of Bayes sampling strategies suggest that field sampling efforts should be inversely proportional to the priors (expressed as probabilities) for the occurrence of contamination
Dynamic characterisation of the specific surface area for fracture networks

Science.gov (United States)

Cvetkovic, V.

2017-12-01

One important application of chemical transport is geological disposal of high-level nuclear waste for which crystalline rock is a prime candidate for instance in Scandinavia. Interconnected heterogeneous fractures of sparsely fractured rock such as granite, act as conduits for transport of dissolved tracers. Fluid flow is known to be highly channelized in such rocks. Channels imply narrow flow paths, adjacent to essentially stagnant water in the fracture and/or the rock matrix. Tracers are transported along channelised flow paths and retained by minerals and/or stagnant water, depending on their sorption properties; this mechanism is critical for rocks to act as a barrier and ultimately provide safety for a geological repository. The sorbing tracers are retained by diffusion and sorption on mineral surfaces, whereas non-sorbing tracers can be retained only by diffusion into stagnant water of fractures. The retention and transport properties of a sparsely fractured rock will primarily depend on the specific surface area (SSA) of the fracture network which is determined by the heterogeneous structure and flow. The main challenge when characterising SSA on the field-scale is its dependence on the flow dynamics. We first define SSA as a physical quantity and clarify its importance for chemical transport. A methodology for dynamic characterisation of SSA in fracture networks is proposed that relies on three sets of data: i) Flow rate data as obtained by a flow logging procedure; ii) transmissivity data as obtained by pumping tests; iii) fracture network data as obtained from outcrop and geophysical observations. The proposed methodology utilises these data directly as well as indirectly through flow and particle tracking simulations in three-dimensional discrete fracture networks. The methodology is exemplified using specific data from the Swedish site Laxemar. The potential impact of uncertainties is of particular significance and is illustrated for radionuclide
Development of an automatic characterisation system for silicon detectors

CERN Document Server

Hacker, J; Krammer, M; Wedenig, R

2002-01-01

The CMS experiment will be equipped with the largest silicon tracker in the world. The tracker will consist of about 25,000 silicon sensors which will cover an area of more than 200 m sup 2. Four quality test centres will carry out various checks on a representative sample of sensors to assure a homogeneous quality throughout the 2((1)/(2)) years of production. One of these centres is based in Vienna. To cope with the large number of sensors a fast and fully automatic characterisation system has been realised. We developed the software in LabView and built a cost-efficient probe station in house by assembling individual components and commercial instruments. Both the global properties of a sensor and the characteristic quantities of the individual strips can be measured. The measured data are immediately analysed and sent to a central database. The mechanical and electrical set-up will be explained and results from CMS prototype sensors are presented.
Development of an automatic characterisation system for silicon detectors

International Nuclear Information System (INIS)

Hacker, J.; Bergauer, T.; Krammer, M.; Wedenig, R.

2002-01-01

The CMS experiment will be equipped with the largest silicon tracker in the world. The tracker will consist of about 25,000 silicon sensors which will cover an area of more than 200 m 2 . Four quality test centres will carry out various checks on a representative sample of sensors to assure a homogeneous quality throughout the 2((1)/(2)) years of production. One of these centres is based in Vienna. To cope with the large number of sensors a fast and fully automatic characterisation system has been realised. We developed the software in LabView and built a cost-efficient probe station in house by assembling individual components and commercial instruments. Both the global properties of a sensor and the characteristic quantities of the individual strips can be measured. The measured data are immediately analysed and sent to a central database. The mechanical and electrical set-up will be explained and results from CMS prototype sensors are presented
Identification and Characterisation of Major Hydrocarbons in ...

African Journals Online (AJOL)

Identification and Characterisation of Major Hydrocarbons in Thermally Degraded Low Density Polyethylene Films. ... There were alkanes, alkenes, halogenated alkanes, and very few aromatics in the liquid product and, the hydrocarbons were observed to range between C10 - C27. The FTIR and GC-MS results show the ...
Detailed characterisation of the incident neutron beam on the TOSCA spectrometer

Science.gov (United States)

Pinna, Roberto S.; Rudić, Svemir; Capstick, Matthew J.; McPhail, David J.; Pooley, Daniel E.; Howells, Gareth D.; Gorini, Giuseppe; Fernandez-Alonso, Felix

2017-10-01

We report a detailed characterisation of the incident neutron beam on the TOSCA spectrometer. A bespoke time-of-flight neutron monitor has been designed, constructed and used to perform extensive spatially resolved measurements of the absolute neutron flux and its underlying time structure at the instrument sample position. The obtained data give a quantitative understanding of the current instrument beyond neutronic simulations and provide a baseline in order to assess the performance of the upgraded instrument. At an average proton current-on-target of 153 μA (ISIS Target Station 1; at the time of measurements) we have found that the wavelength-integrated neutron flux (from 0.28 Å to 4.65 Å) at the position of the TOSCA instrument sample (spatially averaged across the 3 × 3cm2 surface centred around (0,0) position) is approximately 1 . 2 × 106 neutrons cm-2s-1, while the whole beam has a homogeneous distribution across the 3 . 0 × 3 . 5cm2 sample surface. The spectra reproduced the well-known shape of the neutrons moderated by the room temperature water moderator and exhibit a neutron flux of 7 . 3 × 105 neutrons cm-2s-1Å-1 at 1 Å.
Petroleum Characterisation and Reservoir Dynamics - The Froey Field and the Rind Discovery, Norwegian Continental Shelf

Energy Technology Data Exchange (ETDEWEB)

Bhullar, Abid G.

1999-07-01

The objective of this thesis is to apply the fundamental principles of petroleum geochemistry integrated with petroleum/reservoir engineering and geological concepts to the dynamics and characterisation of petroleum reservoirs. The study is based on 600 core samples and 9 DST oils from 11 wells in the Froey Field and the Rind Discovery. The work is presented in five papers. Paper 1 is a detailed characterisation of the reservoirs using a petroleum geochemical approach. Paper 2 describes the application of a single reservoir geochemical screening technique to exploration, appraisal and production geology and reservoir/petroleum engineering. Paper 3 compares the Iatroscan TLC-FID screening technique and the extraction efficiency of micro-extraction used in this work with the well-established Rock-Eval geochemical screening method and with the Soxtec extraction method. Paper 4 refines the migration and filling models of Paper 1, and Paper 5 presents a comparison of models of petroleum generation, migration and accumulation based on geochemical data with 1D burial history, a ''pseudo well'' based on actual well data and regional seismic analysis representing the hydrocarbon generative basin conditions.
Characterisation of the steel concrete interface submitted to chloride-induced corrosion

International Nuclear Information System (INIS)

L'Hostis, V.; Amblard, E.; Guillot, W.; Paris, C.; Bellot-Gurlet, L.

2013-01-01

This paper deals with the characterisation by means of electrochemical, gravimetric and analytical methods of chloride-induced-corrosion behaviour of steel coupons embedded in chloride-containing-cement pastes. Corrosion rates were estimated from electrochemical measurements as well as gravimetric ones. They vary from 2.6 to 5.7μm/year for 5 and 10 g/L chloride-containing cement pastes. Analytical characterisations (including optical and electron microscopy and Raman micro-spectroscopy) showed that corrosion patterns are not depending on the chloride content of the cement paste (5 and 10 g/L chloride in the interstitial solution). A localised corrosion pattern composed of pits growing inside the metallic substratum, a corrosion products layer (CPL) and a transformed medium (TM) was pointed out. CPL can be divided into two sub-layers (CPL1 and CPL2), characterised by the presence or absence of calcium coming from the cement matrix. (authors)
Analytical protocols for characterisation of sulphur-free lignin

NARCIS (Netherlands)

Gosselink, R.J.A.; Abächerli, A.; Semke, H.; Malherbe, R.; Käuper, P.; Nadif, A.; Dam, van J.E.G.

2004-01-01

Interlaboratory tests for chemical characterisation of sulphur-free lignins were performed by five laboratories to develop useful analytical protocols, which are lacking, and identify quality-related properties. Protocols have been established for reproducible determination of the chemical
History of radiological characterisation in Studsvik - History of radiological characterisation in decommissioning projects in Studsvik

International Nuclear Information System (INIS)

Hedvall, Robert

2012-01-01

AB SVAFO is a nuclear waste technology and decommissioning company based in Sweden in the scenic surroundings of Studsvik on the Baltic coast. SVAFO is owned by the Swedish nuclear power industry. The company was created in 1992 by Sydsvenska Vaermekraft AB, Vattenfall AB, Forsmarks Kraftgrupp AB and Oskarshamns Kraftgrupp AB as a consequence of the Act on the Financing of the Management of Certain Radioactive Waste etc, from 1988. AB SVAFO's main business is to take care of formerly state-owned spent nuclear waste at the site, including small amounts of nuclear fuel. Buildings are also included, mainly nuclear waste storage buildings and a research reactor. Some buildings have already been decommissioned and all the fuel is treated. In the past 30 years, various decommissioning projects have been carried out, encompassing areas such as an underground research reactor, a Van de Graaff accelerator, 15,000 m 2 of nuclear laboratories, two 150 m 3 underground concrete sludge silos and several waste-storage buildings. Up till now only one or two persons did a simple characterisation before the project started to get the level of contamination. With the start of the decommissioning of the former uranium mine in Ranstad and the R2-reactor, more efforts have been put for the characterisation. The change in methods will be described. (author)
Purification and characterisation of ferritin from the Baltic blue mussel Mytilus trossulus

Directory of Open Access Journals (Sweden)

Potrykus Joanna

2009-12-01

Full Text Available Baltic blue mussels Mytilus trossulus were collected from the Gulf of Gdańsk (southern Baltic Sea in order to isolate ferritin from its soft tissues, as well as to purify and characterise this protein. Proteins were isolated from the inner organs of M. trossulus (hepatopancreas, gills and soft tissue residue by thermal denaturation(70°C and acidification (pH 4.5 of the homogenates, followed by ammonium sulphate ((NH42SO4 fractionation.The ferritin was then separated by ultracentrifugation (100 000 × g, 120 min.. The protein content in thepurified homogenates was determined by the Lowry method using bovine serum albumin(BSA and horse spleen ferritin (HSF as standards. PAGE-SDS and Western blotting analysis permitted identification of ferritinin the purified preparations. Additionally, the purified homogenates and mussel soft tissue were analysed for their heavy metal contents(especially cadmium and iron in a Video 11 E atomic absorption spectrophotometer, following wet digestion of the samples (HNO3/HClO4. The electrophoregrams showed that the inner organs of M. trossulus contained ferritin, which, like plant ferritin, is characterised by thepresence of subunits in the electrophoregram in the 26.6-28.0 kDa range. The highest ferritin content was recorded in the hepatopancreas,followed by the gills and the soft tissue residue. With regard to the sampling stations, the highest content of ferritin wasnoted in the animals sampled off Sopot (station D3, and in those collected by a diver off Jastarnia (W1 and Gdynia (W4. Ferritinisolated from the inner organs of mussels collected from these stations also contained the largest quantities of heavy metals(Cd and Fe. Ferritin isolated from the inner organs of mussels collected by a diver from wrecks - sites where the concentrationsof iron and other trace metals in the sea water are high - contained higher quantities of heavy metals (Cd and Fe than the ferritinisolated from the inner organs
Impact of cultivation on characterisation of species composition of soil bacterial communities.

Science.gov (United States)

McCaig, A E.; Grayston, S J.; Prosser, J I.; Glover, L A.

2001-03-01

The species composition of culturable bacteria in Scottish grassland soils was investigated using a combination of Biolog and 16S rDNA analysis for characterisation of isolates. The inclusion of a molecular approach allowed direct comparison of sequences from culturable bacteria with sequences obtained during analysis of DNA extracted directly from the same soil samples. Bacterial strains were isolated on Pseudomonas isolation agar (PIA), a selective medium, and on tryptone soya agar (TSA), a general laboratory medium. In total, 12 and 21 morphologically different bacterial cultures were isolated on PIA and TSA, respectively. Biolog and sequencing placed PIA isolates in the same taxonomic groups, the majority of cultures belonging to the Pseudomonas (sensu stricto) group. However, analysis of 16S rDNA sequences proved more efficient than Biolog for characterising TSA isolates due to limitations of the Microlog database for identifying environmental bacteria. In general, 16S rDNA sequences from TSA isolates showed high similarities to cultured species represented in sequence databases, although TSA-8 showed only 92.5% similarity to the nearest relative, Bacillus insolitus. In general, there was very little overlap between the culturable and uncultured bacterial communities, although two sequences, PIA-2 and TSA-13, showed >99% similarity to soil clones. A cloning step was included prior to sequence analysis of two isolates, TSA-5 and TSA-14, and analysis of several clones confirmed that these cultures comprised at least four and three sequence types, respectively. All isolate clones were most closely related to uncultured bacteria, with clone TSA-5.1 showing 99.8% similarity to a sequence amplified directly from the same soil sample. Interestingly, one clone, TSA-5.4, clustered within a novel group comprising only uncultured sequences. This group, which is associated with the novel, deep-branching Acidobacterium capsulatum lineage, also included clones isolated
Characterising the disintegration properties of tablets in opaque media using texture analysis

OpenAIRE

Scheuerle, Rebekah L.; Gerrard, Stephen E.; Kendall, Richard A.; Tuleu, Catherine; Slater, Nigel K.H.; Mahbubani, Krishnaa T.

2015-01-01

Tablet disintegration characterisation is used in pharmaceutical research, development, and quality control. Standard methods used to characterise tablet disintegration are often dependent on visual observation in measurement of disintegration times. This presents a challenge for disintegration studies of tablets in opaque, physiologically relevant media that could be useful for tablet formulation optimisation. In this study is explored an application of texture analysis disintegration testin...
Definably compact groups definable in real closed fields.II

OpenAIRE

Barriga, Eliana

2017-01-01

We continue the analysis of definably compact groups definable in a real closed field $\\mathcal{R}$. In [3], we proved that for every definably compact definably connected semialgebraic group $G$ over $\\mathcal{R}$ there are a connected $R$-algebraic group $H$, a definable injective map $\\phi$ from a generic definable neighborhood of the identity of $G$ into the group $H\\left(R\\right)$ of $R$-points of $H$ such that $\\phi$ acts as a group homomorphism inside its domain. The above result and o...
Characterisation and concentration profile of aluminium during ...

African Journals Online (AJOL)

An aluminium(Al) characterisation study was conducted at a surface water treatment plant (Buffalo Pound Water Treatment Plant (BPWTP) in Moose Jaw, Saskatchewan, Canada) to understand better the effect of alum coagulant on various Al fractions. The raw water source for BPWTP is Buffalo Pound Lake water. The Al ...
Characterisation of fracture network and groundwater preferential ...

African Journals Online (AJOL)

Characterisation of fractured rocks and evaluation of fracture connectivity are essential for the study of subsurface flow and transport in fractured rock aquifers. In this study, we use a new method to present fracture networks and analyse the connectivity of the fractures, based on the technique of randomly-generated ...

Characterisation of childhood and adolescence accidental fatalities ...

African Journals Online (AJOL)

Background: Accidental death in childhood and adolescence is posing a public health problem in Nigeria, as most of these deaths were not caused by the victims. There is need to research into the pattern and circumstances surrounding the death. Aim: To characterise and study accidental deaths in childhood and ...
The synthesis and characterisation of some aliphatic monoamides and diamides

International Nuclear Information System (INIS)

Ruikar, P.B.; Prabhu, D.R.; Mahajan, G.R.; Nagar, M.S.; Nair, G.M.; Subramanian, M.S.

1992-01-01

This report summarises the synthesis and characterisation of several symmetrical, unsymmetrical and branched chain amides which have potential application as alternate extractants to TBP in the Purex Process. Some substituted diamides which have importance in the removal of actinides from transuranium waste have also been synthesised and characterised. The amides contents determined by nonaqueous potentiometric titration indicate a purity of 97-100%. The relative basicity of these amides and diamides have been determined by measuring the equilibrium constants for the uptake of nitric acid by them. The streching frequency of their carbonyl bond has also been listed. (author). 26 refs., 3 tabs
Neutron spectrometry in mixed fields: characterisation of the Ra-1- reactor workplace

International Nuclear Information System (INIS)

Gregori, B.; Carelli, J.; Cruzate, J.; Papadopulos, S.

2006-01-01

The characterisation of the neutron spectrum of a workplace is an essential dosimetric tool for improving the assessment of the personal equivalent dose of the workers. In addition, if the operational conditions of the facility are well defined, the set of field spectra obtained may be used as a reference for comparing the performance of different type of neutron detectors. Recently, using a neutron spectrometric system based on a set of moderated spheres with 3 He detector, the characterisation of the neutron spectra in workplaces of the Argentine Reactor No. 1 (R.A. -1) has been carried out. The spectrometric system consists of 12 spheres made of the high density polyethylene d mean δ =0.95 g cm 3 , with diameters between 3'' and 12'' and a proportional counter of 3 He, 4 atm of nominal pressure, Centronic trade mark, located in the centre of the spheres. The neutron response matrix was calculated using the M.C.N.P. -I.V.B. code and E.N.D.F./B-VI library in the energy range between thermal neutron and 100 MeV. The neutron spectrum was unfolded using the M.A.X.E.D. unfolding code. The validation of the spectrometric system was performed at Cea-Cadarache (France) with of 252 Cf, Am Be, and 252 Cf + D 2 O sources. Therefore, in this work, the spectral fluence of the field in the selected points of the facility (R.A.-1) has been presented and the ambient dose equivalent, H *(10), and the personal dose equivalent, Hp(10), have been derived from the neutron fluence, applying ICRP-74 recommended fluence to dose conversion factors. The quantities evaluated have uncertainties less than 15%, which is considered good enough for radiation protection requirements. (authors)
Geological data acquisition for site characterisation at Olkiluoto: a framework for the phase of underground investigations

International Nuclear Information System (INIS)

Milnes, A.G.; Aaltonen, I.; Kemppainen, K.; Mattila, J.; Wikstroem, L.; Front, K.; Kaerki, A.; Gehoer, S.; Paulamaeki, S.; Paananen, M.; Ahokas, T.

2007-05-01

'Geological data acquisition' is a general term for the collection of observations and measurements by direct observation of exposed bedrock in the field (i.e. in natural outcrops and trenches, in drillholes, and in tunnels and other underground excavations). Only field-based data acquisition is included in this report: laboratory-based investigations will be continued, based on the field data and sampling, and all the data will be subject to discipline-specific processing, as the project proceeds. The ultimate aim of geological data acquisition is to provide the necessary data base for geological models of the bedrock of the Olkiluoto site, in connection with the construction of an underground rock characterisation facility, ONKALO, and a repository for spent nuclear fuel, at about 500m depth. Geological data acquisition plays a central role in site characterisation and modelling, and is intended to provide a solid platform on which the other disciplines (rock mechanics, hydrogeology, seismic risk assessment, etc.) can base their investigations. Based on consideration of a series of guidelines (e.g. modelling scale, source of data, level of investigation, national and international experience, special conditions at Olkiluoto, need for process understanding), a project-oriented 'framework' has been developed as a background to the different projects within the geological data acquisition programme. Each project will require its own system of data acquisition (methodology, spreadsheets, protocols, etc.), as described in the corresponding reports; the present report concentrates on the general principles which lie behind the different methodologies and data sheets. These principles are treated under three main headings: characterization of intact rock, characterization of deformation zone intersections, and characterization of individual fractures. Geological mapping of natural outcrops and trenches at Olkiluoto, and lithological logging of more than 40 rock cores
Radiological characterisation of contaminated concretes from the object 44/20 of NPP A1

International Nuclear Information System (INIS)

Slavik, O.; Listjak, M.; Pely, I.; Soos, F.

2005-01-01

Results of radiological characterisation of contaminated concretes from object 44/20 of the NPP A-1 Jaslovske Bohunice are summarized in this work. These works were carried out in VUJE in the laboratory of environmental dosimetry in 2004 and partially in 2005. The main results of radiological characterisation can be summarised as follow: (1) Contamination of concretes is in all cases surficial, it reaches up to 5-10 mm, the dominant contaminant is 137 Cs; (2) The spawn concrete is mostly contaminated only from one side (one being adjacent to the ceiling concrete), crucial part of them is even on this side contaminated in very low level complying with free release level; (3) The ceiling concrete blocks are contaminated mostly on one side, only (the inner side of shafts), their decontamination will require removing of about 5 mm thick surface layer. (4) The floor concrete is covered by heavily contaminated dust 137 CS, 100-500 Bq/g), originating from sorting of the wet RAW .Its decontamination will require removing of 10 mm thick surface concrete layer; (5) The core samples taken from the whole depth profile of the ceiling concrete show also only surface contamination, samples prepared from the deeper layers have not demonstrated any contamination in these layers. Control measurements of deeper concrete layers, however, went on with negative results also in year 2005; (6) The relative content for 90 Sr in these concretes is in average about 8%, for 241 Am determined by gamma-spectrometry is 0.4% and for 239 , 240 Pu determined radiochemically is 0.33% in comparison with the content of 137 Cs. (authors)
Characterisation of GERDA Phase-I detectors in liquid argon

Energy Technology Data Exchange (ETDEWEB)

Barnabe Heider, Marik; Schoenert, Stefan [Max-Planck-Institut fuer Kernphysik (Germany); Gusev, Konstantin [Russian Research Center, Kurchatov Institute (Russian Federation); Joint Institute for Nuclear Research (Russian Federation)

2009-07-01

GERDA will search for neutrinoless double beta decay in {sup 76}Ge by submerging bare enriched HPGe detectors in liquid argon. In GERDA Phase-I, reprocessed enriched-Ge detectors, which were previously operated by the Heidelberg-Moscow and IGEX collaborations, and reprocessed natural-Ge detectors from Genius-TF, will be redeployed. We have tested the operation and performance of bare HPGe detectors in liquid nitrogen and in liquid argon over more than three years with three non-enriched p-type prototype detectors. The detector handling and mounting procedures have been defined and the Phase-I detector technology, the low-mass assembly and the long-term stability in liquid argon have been tested successfully. The Phase-I detectors were reprocessed by Canberra Semiconductor NV, Olen, according to their standard technology but without the evaporation of a passivation layer. After their reprocessing, the detectors have been mounted in their low-mass holders and their characterisation in liquid argon performed. The leakage current, the counting characteristics and the efficiency of the detectors have been measured. The testing of the detectors was carried out in the liquid argon test stand of the GERDA underground Detector Laboratory (GDL) at LNGS. The detectors are now stored underground under vacuum until their operation in GERDA.
On the fate of carbon nanotubes : morphological characterisations

NARCIS (Netherlands)

Loos, J.; Grossiord, N.; Koning, C.E.; Regev, O.

2007-01-01

Single-walled and multi-walled carbon nanotubes (SWNTs and MWNTs) were characterised as-produced, after exfoliation and purification, and imbedded in the polymer matrix of nanocomposites by using various microscopic techniques. Transmission electron microscopy (TEM) shows thickness distribution as
Characterisation of metals in the electronic waste of complex mixtures of end-of-life ICT products for development of cleaner recovery technology.

Science.gov (United States)

Sun, Z H I; Xiao, Y; Sietsma, J; Agterhuis, H; Visser, G; Yang, Y

2015-01-01

Recycling of valuable metals from electronic waste, especially complex mixtures of end-of-life information and communication technology (ICT) products, is of great difficulty due to their complexity and heterogeneity. One of the important reasons is the lack of comprehensive characterisation on such materials, i.e. accurate compositions, physical/chemical properties. In the present research, we focus on developing methodologies for the characterisation of metals in an industrially processed ICT waste. The morphology, particle size distribution, compositional distribution, occurrence, liberation as well as the thermo-chemical properties of the ICT waste were investigated with various characterisation techniques, including X-ray Fluorescence Spectrometry (XRF), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy dispersed spectroscopy (EDS). Due to the high heterogeneity of the material, special sample preparation procedures were introduced to minimise the discrepancies during compositional analyses. As a result, a clearer overview of the ICT waste has been reached. This research provides better understanding of the extractability of each metal and improves the awareness of potential obstacles for extraction. It will lead to smarter decisions during further development of a clean and effective recovery process. Copyright © 2014 Elsevier Ltd. All rights reserved.
Fabrication and characterisation of a novel biomimetic anisotropic ceramic/polymer-infiltrated composite material.

Science.gov (United States)

Al-Jawoosh, Sara; Ireland, Anthony; Su, Bo

2018-04-10

To fabricate and characterise a novel biomimetic composite material consisting of aligned porous ceramic preforms infiltrated with polymer. Freeze-casting was used to fabricate and control the microstructure and porosity of ceramic preforms, which were subsequently infiltrated with 40-50% by volume UDMA-TEGDMA polymer. The composite materials were then subjected to characterisation, namely density, compression, three-point bend, hardness and fracture toughness testing. Samples were also subjected to scanning electron microscopy and computerised tomography (Micro-CT). Three-dimensional aligned honeycomb-like ceramic structures were produced and full interpenetration of the polymer phase was observed using micro-CT. Depending on the volume fraction of the ceramic preform, the density of the final composite ranged from 2.92 to 3.36g/cm 3 , compressive strength ranged from 206.26 to 253.97MPa, flexural strength from 97.73 to 145.65MPa, hardness ranged from 1.46 to 1.62GPa, and fracture toughness from 3.91 to 4.86MPam 1/2 . Freeze-casting provides a novel method to engineer composite materials with a unique aligned honeycomb-like interpenetrating structure, consisting of two continuous phases, inorganic and organic. There was a correlation between the ceramic fraction and the subsequent, density, strength, hardness and fracture toughness of the composite material. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.
Fast-Scan DSC and its role in pharmaceutical physical form characterisation and selection.

Science.gov (United States)

Ford, James L; Mann, Timothy E

2012-04-01

Conventional rate Differential Scanning Calorimetry (DSC) has been used for many years as a tool in the analysis of pharmaceutical materials. In recent years an extension of the technique to include fast heating and cooling rates has become more prevalent. Broadly termed Fast-Scan DSC, this review examines the current applications of this technique to the characterisation and selection of pharmaceutical materials. Its increasing use encompasses the characterisation of amorphousness in crystalline materials, the characterisation of polymorphs and polymorphic transitions, the solubility of drugs in polymers, and characterisation of dosage forms. Notwithstanding the advantages of analytical speed in analytical turnover, the review emphasises the advantages of Fast-Scan DSC in its sensitivity which allows the separation of overlapping thermal events, the reduction it provides in degradation during the scanning process and its role in determining solubility in waxy and polymeric based systems. A comparison of the uses of Fast-Scan DSC to modulated DSC techniques and localised thermal analysis is also given. © 2011 Elsevier B.V. All rights reserved.
Characterisation of colloidal drug delivery systems from the naked eye to Cryo-FESEM

DEFF Research Database (Denmark)

Krauel, Karen; Girvan, Liz; Hook, Sarah

2007-01-01

Poly(ethylcyanoacrylate) nanoparticles prepared by interfacial polymerisation on the basis of microemulsions were prepared in this study and both colloidal systems, nanoparticles and microemulsions, were analysed by visual observation and several microscopic techniques. Phase boundaries...... for the microemulsions of the two pseudoternary systems ethyloleate, polyoxyethylene 20 sorbitan mono-oleate/sorbitan monolaurate and water with and without butanol as a cosurfactant were determined by visual observation of the samples. Microemulsions containing liquid crystals were determined by polarisation light...... microscopy. Using freeze-fracture transmission electron microscopy and Cryo-field emission scanning electron microscopy the type of microemulsion (w/o droplet, bicontinuous, solution) was characterised. Nanoparticles prepared from the different types of microemulsion were additionally observed...
Application of nuclear and allied techniques for the characterisation of forensic samples

International Nuclear Information System (INIS)

Sudersanan, M.; Kayasth, S.R.; Pant, D.R.; Chattopadhyay, N.; Bhattacharyya, C.N.

2002-01-01

Full text: Forensic science deals with the application of various techniques for physics, chemistry and biology for crime investigation. The legal implication of such analysis put considerable restriction on the choice of analytical techniques. Moreover, the unknown nature of the materials, the limited availability of samples and the large number of elements to be analysed put considerable strain on the analytical chemist on the selection of the appropriate technique. The availability of nuclear techniques has considerably enhanced the scope of forensic analysis. This paper deals with the recent results on the use of nuclear and allied analytical techniques for forensic applications. One of the important types of samples of forensic importance pertain to the identification of gunshot residues. The use of nuclear techniques has considerably simplified the interpretation of results through the use of appropriate elements like Ba, Cu, Sb, Zn, As and Sn etc. The combination of non-nuclear techniques for elements like Pb and Ni which are not easily amenable to be analysed by NAA and the use of appropriate separation procedure has led to the use of this method as a valid and versatile analytical procedure. In view of the presence of a large amounts of extraneous materials like cloth, body tissues etc in these samples and the limited availability of materials, the procedures for sample collection, dissolution and analysis have been standardized. Analysis of unknown materials like powders, metallic pieces etc. for the possible presence of nuclear materials or as materials in illicit trafficking is becoming important in recent years. The use of multi-technique approach is important in this case. Use of non-destructive techniques like XRF and radioactive counting enables the preliminary identification of materials and for the detection of radioactivity. Subsequent analysis by NAA or other appropriate analytical methods allows the characterization of the materials. Such
A review of measurement and characterisation of airborne long-lived alpha-emitting radionuclides

International Nuclear Information System (INIS)

Bigu, J.

1993-01-01

Sampling principles, monitoring instrumentation and characterisation of Long-Lived Radioactive Dust (LLRD) generated in U-Th mine and mill operations are discussed. Methods and techniques for the quantification, radionuclide identification and the study of other important characteristics of LLRD (e.g., electrical charge) are reviewed. Furthermore, field and laboratory measurements and methods of radiation dose assessment are revised. Some emphasis is placed in this work on occupational worker exposure assessment and the principles, methods and techniques of 'external' radiation exposure, internal dosimetry, and dosimetric models. It is clear that in spite of constant advances in the several areas which are the subject of this paper, there is still considerable room for improvement. For example, there is no universally accepted sampling protocol and sampler for routine LLRD monitoring for occupational hygiene exposure calculation purposes. Other areas for improvement could include calibration of instrumentation and improved sensitivity in radionuclide quantification and identification. 105 refs., 6 tabs., 3 figs
Characterising and comparing the spawning habitats of anchovy ...

African Journals Online (AJOL)

The spawning habitats of anchovy Engraulis encrasicolus and sardine Sardinops sagax in the southern Benguela upwelling ecosystem were characterised by comparing their egg abundances with environmental variables measured concomitantly during two different survey programmes: the South African Sardine and ...
Physico-chemical characterisation of Slovak wines

Directory of Open Access Journals (Sweden)

Barbora Lapčíková

2017-01-01

Full Text Available The aim of the present study was characterisation of selected varieties of still wines produced in Slovak Republic in vintage year 2013 and one 2012. There were tested ten samples of nine varieties of wines originated from Malokarpatská "Lesser Carpathian" and Južnoslovenská "Southern Slovakia" wine regions of Slovak Republic, Dornfelder, Frankovka modrá, Svätovarinecké, Zweigeltrebe, Müller Thurgau, Veltlínské zelené, Rizling rýnsky, Rizling vlašský and Sauvignon wines. There were studied selected physico-chemical properties of tested wines as a total contents of anthocyanins and polyphenols by means of spectrophotometry, titratable acidity, density and chromatic characteristics. The highest content of anthocyanins (TAC was found in red wine Frankovka modrá, 183 mg.L-1 and the lowest for sample rose wine St. Laurent 19 mg.L-1. The content of total phenolic compounds as a gallic acid was in range 2833 to 1961 mg.L-1 for red wines, 1016 and 1013 mg.L-1 for rose wines, 1085 to 549 mg.L-1for white wines. Total acidy was average 6.3 ±0.3 g.L-1 only for Ryzling rýnský, 8.2 g.L-1 and Sauvignon rose 8.0 g.L-1 and was expressed as the amount of tartaric acid. Quality of wines can be expressed by colour intensity too. Was evaluated and compared intensity of colour in wines by CIE Lab method and the total differences between red, rose and white wine DE* was calculated. The most differences was found for Svätovarinecké a Frankovka modrá (2.5 - red wines ("clearly perceptible" and 4.9 for Veltlýnské zelené and Müller Thurgau - white wine ("moderating effect".
Simple, quick and cost-efficient: A universal RT-PCR and sequencing strategy for genomic characterisation of foot-and-mouth disease viruses.

Science.gov (United States)

Dill, V; Beer, M; Hoffmann, B

2017-08-01

Foot-and-mouth disease (FMD) is a major contributor to poverty and food insecurity in Africa and Asia, and it is one of the biggest threats to agriculture in highly developed countries. As FMD is extremely contagious, strategies for its prevention, early detection, and the immediate characterisation of outbreak strains are of great importance. The generation of whole-genome sequences enables phylogenetic characterisation, the epidemiological tracing of virus transmission pathways and is supportive in disease control strategies. This study describes the development and validation of a rapid, universal and cost-efficient RT-PCR system to generate genome sequences of FMDV, reaching from the IRES to the end of the open reading frame. The method was evaluated using twelve different virus strains covering all seven serotypes of FMDV. Additionally, samples from experimentally infected animals were tested to mimic diagnostic field samples. All primer pairs showed a robust amplification with a high sensitivity for all serotypes. In summary, the described assay is suitable for the generation of FMDV sequences from all serotypes to allow immediate phylogenetic analysis, detailed genotyping and molecular epidemiology. Copyright © 2017 Elsevier B.V. All rights reserved.
Characterising Event-Based DOM Inputs to an Urban Watershed

Science.gov (United States)

Croghan, D.; Bradley, C.; Hannah, D. M.; Van Loon, A.; Sadler, J. P.

2017-12-01

Dissolved Organic Matter (DOM) composition in urban streams is dominated by terrestrial inputs after rainfall events. Urban streams have particularly strong terrestrial-riverine connections due to direct input from terrestrial drainage systems. Event driven DOM inputs can have substantial adverse effects on water quality. Despite this, DOM from important catchment sources such as road drains and Combined Sewage Overflows (CSO's) remains poorly characterised within urban watersheds. We studied DOM sources within an urbanised, headwater watershed in Birmingham, UK. Samples from terrestrial sources (roads, roofs and a CSO), were collected manually after the onset of rainfall events of varying magnitude, and again within 24-hrs of the event ending. Terrestrial samples were analysed for fluorescence, absorbance and Dissolved Organic Carbon (DOC) concentration. Fluorescence and absorbance indices were calculated, and Parallel Factor Analysis (PARAFAC) was undertaken to aid sample characterization. Substantial differences in fluorescence, absorbance, and DOC were observed between source types. PARAFAC-derived components linked to organic pollutants were generally highest within road derived samples, whilst humic-like components tended to be highest within roof samples. Samples taken from the CSO generally contained low fluorescence, however this likely represents a dilution effect. Variation within source groups was particularly high, and local land use seemed to be the driving factor for road and roof drain DOM character and DOC quantity. Furthermore, high variation in fluorescence, absorbance and DOC was apparent between all sources depending on event type. Drier antecedent conditions in particular were linked to greater presence of terrestrially-derived components and higher DOC content. Our study indicates that high variations in DOM character occur between source types, and over small spatial scales. Road drains located on main roads appear to contain the poorest
Groundwater sampling and chemical characterisation of the Laxemar deep borehole KLX02

International Nuclear Information System (INIS)

Laaksoharju, M.; Skaarman, C.; Smellie, J.; Nilsson, A.C.

1995-02-01

The Laxemar deep borehole, KLX02 (1705 m depth), located close to the Aespoe Hard Rock Laboratory (HRL), has been investigated. Groundwater sampling was conducted on two occasions and using different methods. The first sampling was taken in the open borehole using the so-called Tube sampler; the second sampling carried out using the SKB-packer equipment to isolate pre-determined borehole sections. Groundwater compositions consist of two distinct groupings; one shallow to intermediate Sodium-Bicarbonate type (Na(Ca,K):HC 3 Cl(SO 4 )) to a depth of 1000 m, and the other of deep origin, a calcium-chloride type (Ca-Na(K):Cl-SO 4 (Br)), occurring below 1000 m. The deep brines contain up to 46000 mg of Cl per litre. The influence of borehole activities are seen in the tritium data which record significant tritium down to 1000 m, and even to 1420 m. Mixing modelling shows that water from the 1960's is the main source for this tritium. The high tritium values in the 1090-1096.2 m section are due to contamination of 1% shallow water from 1960 and 2% of modern shallow water. The upper 800 m of bedrock at Laxemar lies within a groundwater recharge area; the sub-vertical to moderate angled fracture zones facilitate groundwater circulation to considerable depths, at least to 800 m, thus accounting for some of the low saline brackish groundwaters in these conducting fracture zones. Below 1000 m the system is hydraulically and geochemically 'closed' such that highly saline brines exist in a near-stagnant environment. 30 refs, 22 figs, 8 tabs
DEFINED CONTRIBUTION PLANS, DEFINED BENEFIT PLANS, AND THE ACCUMULATION OF RETIREMENT WEALTH

Science.gov (United States)

Poterba, James; Rauh, Joshua; Venti, Steven; Wise, David

2010-01-01

The private pension structure in the United States, once dominated by defined benefit (DB) plans, is currently divided between defined contribution (DC) and DB plans. Wealth accumulation in DC plans depends on the participant's contribution behavior and on financial market returns, while accumulation in DB plans is sensitive to a participant's labor market experience and to plan parameters. This paper simulates the distribution of retirement wealth under representative DB and DC plans. It uses data from the Health and Retirement Study (HRS) to explore how asset returns, earnings histories, and retirement plan characteristics contribute to the variation in retirement wealth outcomes. We simulate DC plan accumulation by randomly assigning individuals a share of wages that they and their employer contribute to the plan. We consider several possible asset allocation strategies, with asset returns drawn from the historical return distribution. Our DB plan simulations draw earnings histories from the HRS, and randomly assign each individual a pension plan drawn from a sample of large private and public defined benefit plans. The simulations yield distributions of both DC and DB wealth at retirement. Average retirement wealth accruals under current DC plans exceed average accruals under private sector DB plans, although DC plans are also more likely to generate very low retirement wealth outcomes. The comparison of current DC plans with more generous public sector DB plans is less definitive, because public sector DB plans are more generous on average than their private sector counterparts. PMID:21057597
Derivation and characterisation of hESC lines from supernumerary embryos, experience from Odense, Denmark

DEFF Research Database (Denmark)

Harkness, Linda; Rasmussen, Iben Anne; Erb, Karin

2010-01-01

The derivation and characterisation of human embryonic stem cells provides a source of pluripotent stem cells with potential for clinical applications. Utilising locally sourced embryos from two IVF clinics, we derived and characterised five new cell lines for use in a non-clinical setting. Analy...

Combined rock-physical modelling and seismic inversion techniques for characterisation of stacked sandstone reservoir

NARCIS (Netherlands)

Justiniano, A.; Jaya, Y.; Diephuis, G.; Veenhof, R.; Pringle, T.

2015-01-01

The objective of the study is to characterise the Triassic massive stacked sandstone deposits of the Main Buntsandstein Subgroup at Block Q16 located in the West Netherlands Basin. The characterisation was carried out through combining rock-physics modelling and seismic inversion techniques. The
Applying Freeze Technology for Characterisation of Liquids, Sludge and Sediment

International Nuclear Information System (INIS)

Eriksson, Jens; Foster, Adam; Lindberg, Maria

2016-01-01

Full text of publication follows: Contaminated solids below a water table or solids in a water saturated environment can be major cost drivers and have a massive impact on the overall schedule and scope for a decommissioning project if not managed properly. One well recognized key activity in the preparation for decommissioning is to perform a proper characterisation covering all objects and areas which have been affected or potentially affected by contamination. Characterization of potentially contaminated material located below water or in water saturated environments can be difficult to perform accurately. Furthermore, traditional sampling techniques typically result in the disturbance or spreading of the contamination during sample collection. Sampling programs should be done in such a way that the radioactivity is contained (to avoid further spread of contamination), and in a way that the risk for cross contamination is minimised. Studsvik's Freeze Technology has been used to develop the necessary sampling techniques to meet these objectives. This technology is proven and frequently used for environmental characterization and remediation applications. The design of the sampling tools for radiological characterisation allows for samples to be taken at specific depths and at specific locations within the contaminated area without disturbing the contaminated material around the sample location. In addition to the sampling technique described above, a modified freeze sampling design has proven to be very useful in collecting frozen core samples that provide an accurate profile of the contamination and chemical and physical characteristics of the sediment or sludge as a function of depth into the sludge or sediment. Ultimately, this technique is used to develop a 3-D map of the physical characteristics and the chemical and radiological composition of the contaminated area. For many projects, this type of information will allow for a large reduction in the
Towards a complete characterisation of guaiacwood oil.

Science.gov (United States)

Tissandié, Loïc; Viciana, Stéphane; Brevard, Hugues; Meierhenrich, Uwe J; Filippi, Jean-Jacques

2018-05-01

Guaiacwood oil is a common perfume ingredient used in modern compositions for its suave woody-rosy scent. This essential oil is a byproduct of the timber industry obtained by hydrodistillation of the heartwood of Bulnesia sarmientoi, a tree native from Latin America. Despite being widely used in perfumery, guaiacwood oil has been poorly described in the past. This study aims at giving an in-depth characterisation of its chemical composition as well as disclosing the odorant compounds responsible for its characteristic fragrance. Our methodology was based on a combination of fractionation and analytical techniques, including comprehensive two-dimensional gas chromatography coupled to mass spectrometry and preparative capillary-gas chromatography. The entire analytical work led to the isolation of 20 constituents among which 14 have never been reported so far in natural extracts. Each isolated compound was fully characterised by spectroscopic methods. Finally, the accurate knowledge of the chemical composition permitted the identification of the odour-active constituents by gas chromatography-olfactometry. Copyright © 2018 Elsevier Ltd. All rights reserved.
Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I-Characterisation of Thermophysical Properties.

Science.gov (United States)

Tranchard, Pauline; Samyn, Fabienne; Duquesne, Sophie; Estèbe, Bruno; Bourbigot, Serge

2017-05-04

Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures) were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA), Simultaneous Thermal analysis (STA), Laser Flash analysis (LFA), and Fourier Transform Infrared (FTIR) analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D) model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper). The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering.
Characterisation, control, and energy management of electrified turbocharged diesel engines

International Nuclear Information System (INIS)

Zhao, Dezong; Winward, Edward; Yang, Zhijia; Stobart, Richard; Steffen, Thomas

2017-01-01

Highlights: • A real-time energy management framework for electrified engines is proposed. • A multi-variable robust controller is designed. • Characterisation on the air system of electrified diesel engines is given. • Reliable for engine downsizing because of the promising transient performance. - Abstract: The electrification of engine components offers significant opportunities for fuel efficiency improvements. The electrified turbocharger is one of the most attractive options since it recovers part of the engine exhaust gas mechanical energy to assist boosting. Therefore, the engine can be downsized through improved transient responsiveness. In the electrified turbocharger, an electric machine is mounted on the turbine shaft and changes the air system dynamics, so characterisation of the new layout is essential. A systematic control solution is required to manage energy flows in the hybrid system. In this paper, a framework for characterisation, control, and energy management for an electrified turbocharged diesel engine is proposed. The impacts of the electric machine on fuel economy and air system variables are analysed. Based on the characterisation, a two-level control structure is proposed. A real-time energy management strategy is employed as the supervisory level controller to generate the optimal values of critical variables, while a model-based multi-variable controller is designed as the low level controller to track the values. The two controllers work together in a cascade to address both fuel economy optimisation and battery state-of-charge maintenance. The proposed control strategy is validated on a high fidelity physical engine model. The tracking performance shows the proposed framework is a promising solution in regulating the behavior of electrified engines.
Location and characterisation of pollution sites by principal ...

African Journals Online (AJOL)

Location and characterisation of pollution sites by principal component analysis of trace contaminants in a slightly polluted seasonal river: a case study of the Arenales River (Salta, Argentina) ... Keywords: trace element contamination, water quality, principal component analysis, Arenales River, Salta, Argentina ...
Chemical and physicochemical characterisation of co-products from the vegetable food and agro industries

DEFF Research Database (Denmark)

Serena, Anja; Bach Knudsen, Knud Erik

2007-01-01

was responsible for the relatively low EDOM. There was a variation from year to year in the concentration of ash (Pprotein (P=0.04) and EDOM (P=0.003) in pea hull. In conclusion, co-products from the vegetable food and agro industries are characterised by a high......Six co-products from the vegetable food and agro industres in Denmark - brewer's spent grain, pea hull, seed residue (rye grass), potato pulp, sugar beet pulp and pectin residue - were collected eight times during two seasons (four samples from each season) (n = 8; N = 48). The samples were...... analysed for dry matter (DM), ash, sand, protein, amino acids, ether extract (EE), carbohydrate constituents, enzyme digestible organic matter (EDOM) and physicochemical properties-water binding capacity (WBC) and swelling. The co-products in general had a low DM (142-216 g/kg as is), EE (6-54 g/kg DM...
Molecular characterisation of protist parasites in human-habituated mountain gorillas (Gorilla beringei beringei), humans and livestock, from Bwindi impenetrable National Park, Uganda.

Science.gov (United States)

Nolan, Matthew J; Unger, Melisa; Yeap, Yuen-Ting; Rogers, Emma; Millet, Ilary; Harman, Kimberley; Fox, Mark; Kalema-Zikusoka, Gladys; Blake, Damer P

2017-07-18

Over 60 % of human emerging infectious diseases are zoonotic, and there is growing evidence of the zooanthroponotic transmission of diseases from humans to livestock and wildlife species, with major implications for public health, economics, and conservation. Zooanthroponoses are of relevance to critically endangered species; amongst these is the mountain gorilla (Gorilla beringei beringei) of Uganda. Here, we assess the occurrence of Cryptosporidium, Cyclospora, Giardia, and Entamoeba infecting mountain gorillas in the Bwindi Impenetrable National Park (BINP), Uganda, using molecular methods. We also assess the occurrence of these parasites in humans and livestock species living in overlapping/adjacent geographical regions. Diagnostic PCR detected Cryptosporidium parvum in one sample from a mountain gorilla (IIdA23G2) and one from a goat (based on SSU). Cryptosporidium was not detected in humans or cattle. Cyclospora was not detected in any of the samples analysed. Giardia was identified in three human and two cattle samples, which were linked to assemblage A, B and E of G. duodenalis. Sequences defined as belonging to the genus Entamoeba were identified in all host groups. Of the 86 sequence types characterised, one, seven and two have been recorded previously to represent genotypes of Cryptosporidium, Giardia, and Entamoeba, respectively, from humans, other mammals, and water sources globally. This study provides a snapshot of the occurrence and genetic make-up of selected protists in mammals in and around BINP. The genetic analyses indicated that 54.6% of the 203 samples analysed contained parasites that matched species, genotypes, or genetic assemblages found globally. Seventy-six new sequence records were identified here for the first time. As nothing is known about the zoonotic/zooanthroponotic potential of the corresponding parasites, future work should focus on wider epidemiological investigations together with continued surveillance of all parasites in
Sampling and characterisation of groundwater colloids in ONKALO at Olkiluoto, Finland 2009-2010

International Nuclear Information System (INIS)

Jaervinen, E.; Manninen, P.; Takala, M.; Vilhunen, S.

2011-04-01

The purpose of this study was to estimate the concentration of colloids and composition of the colloid phase on the basis of the water chemistry results of filtered and unfiltered water samples and to compare the results with the previous ones. The water samples were collected from groundwater stations ONK-PVA1 in December 2009 and ONKPVA5 in June 2010. The colloid concentrations were determined from scanning electron microscopy (SEM) micrographs taken from the filters. The change in the water chemistry due to filtration was also analysed. The decrease of element concentrations due to filtration would possibly reflect the composition of the colloid phase. Because the concentration of the colloids is very low, three parallel water samples were analysed three times with an Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) analyser so that the chemical differences between the filtered and unfiltered water could be evaluated. The colloid concentration in ONK-PVA1, determined by the single particle analysis of SEM micrographs, was 0.5 μg/l while the colloid concentration in ONK-PVA5 was 0.15 μg/l. The colloid phase composition could not be reliably determined due to the low colloid concentration. (orig.)
Synthesis and Characterisation of Eight Isomeric Bis(2-pyridyloxynaphthalenes

Directory of Open Access Journals (Sweden)

Peter J. Steel

2006-09-01

Full Text Available Eight isomeric bis(2-pyridyloxynaphthalenes have been prepared from reactions of 2-bromopyridine with the appropriate dihydroxynaphthalene and the products fully characterised by 1- and 2-D NMR spectroscopy.
Application of Fourier analysis to the study of roughness profiles of eroded samples

International Nuclear Information System (INIS)

Bethencourt, M.; Botana, F.J.; Calvino, J.J.; Marcos, M.; Rodriguez-Chacon, M.A.

1998-01-01

Fourier transforms are applied to analyse surface roughness profiles recorded on samples coming from erosion-corrosion essays. The information retrieved using this method clearly complements that revealed by the more classical roughness amplitude parameters. The analysis procedure here proposed can be applied not only to characterise the surface of corroded samples but, in general, to evaluate the quality of any surface after application of finishing treatments. (Author) 7 refs
Workplace Field Characterisation at Chernobyl Unit 4 Shelter

International Nuclear Information System (INIS)

Chumak, V.; Bakhanova, E.; Volosky, V.; Shylo, S.; Chernyshov, G.; Dmitrienko, A.; Rozumny, V.

2001-01-01

Full text: When assessment of effective dose is required, radiation field needs to be characterised in terms of energy spectrum and geometry of exposure. Prior to application of pre-calculated (e.g. ICRP 74) or site-specific conversion coefficients, one need to demonstrate compliance with one of standard irradiation geometries and determine appropriate energy (or energy spectrum). Particular conditions of the entombment of Chernobyl Unit 4 (Object 'Shelter') high dose rate fields, complex source-target geometry, presence of heavy shielding structures and, as a result, significant scattered component in radiation field make application of conventional area monitoring instruments like in situ spectrometers complicated if possible at all. Unique techniques and devices were developed for workplace field characterisation at Object 'Shelter'. The set of devices includes passive spectrometric system, which makes use of simultaneous exposing several TLD detectors placed inside spherical attenuators (principle much similar to Bonner sphere neutron spectroscopy). Deconvolution of gamma spectra is performed through solving a system of simultaneous linear equations. Geometry of irradiation at given workplace is determined by TLD detectors placed in the six-vector collimator. This simple device allows determination of anisotropy of radiation field, both horizontal and vertical. Another design incorporates portable gamma spectrometer with 1'x2' NaI detector placed in the specially designed lead-copper collimator with aperture compatible with the one of the described above six-vector passive system. The discussed experimental set-up was extensively tested in various locations within Object 'Shelter'. Results of both energy spectrum and exposure geometry characterisation demonstrated feasibility of the proposed approach. (author)
In-flight scalar calibration and characterisation of the Swarm magnetometry package

DEFF Research Database (Denmark)

Tøffner-Clausen, Lars; Lesur, Vincent; Olsen, Nils

2016-01-01

of magnetometers is demonstrated, confirming the high performance of these instruments. The results presented here, including the characterisation of a Sun-driven disturbance field, form the basis of the correction of the magnetic vector measurements from Swarm which is applied to the Swarm Level 1b magnetic data.......We present the in-flight scalar calibration and characterisation of the Swarm magnetometry package consisting of the absolute scalar magnetometer, the vector magnetometer, and the spacecraft structure supporting the instruments. A significant improvement in the scalar residuals between the pairs...
Physicochemical characterisation of hexanic seed oil extract from ...

African Journals Online (AJOL)

The physicochemical characterisation of oil extracts from Schinus molle seeds collected in South Africa was performed. The oils were extracted in hexane, physicochemical parameters determined and lipids profiled by gas chromatography, in order to determine its potential for use in industry, ethnomedicine and its ...
Characterisation of tectonic lineaments in the Central Equatorial ...

African Journals Online (AJOL)

Characterisation of tectonic lineaments in the Central Equatorial Atlantic region of Africa using Bouguer anomaly gravity data. ... Ife Journal of Science ... 3-D standard Euler deconvolution analysis was carried out on Bouguer anomaly gravity data for configuration definition and approximate depth estimate of tectonic ...
The concept of a 'microstructural fingerprint' for the characterization of samples in nuclear forensic science

International Nuclear Information System (INIS)

Ray, I.L.F.; Schubert, A.; Wallenius, M.

2002-01-01

In the examination of unknown specimens of nuclear materials the primary parameter of importance is the 'Isotopic Fingerprint' of the sample, mainly the ratios of the different isotopes of U and Pu which are present. In some cases, however, where no clear isotopic signature is found, or where there is a mixture of materials present, the isotopic fingerprint alone is not sufficient for a unique identification to be made. In this paper the concept of a 'Microstructural Fingerprint' of a sample is proposed and developed, which is complementary to the 'Isotopic Fingerprint' for the characterisation of materials which are under investigation in the field of nuclear forensic science. The proposal combines the techniques of Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Analysis (EDX), to define the microstructure of a suspect sample, a combination of techniques which has not been used before in nuclear forensic science. The microstructural information is particularly important in the case of powder samples, for the following reasons: 1) An essential prerequisite to an isotopic analysis, for example by Thermal Ionisation Mass Spectrometry (TIMS), is the information whether a powder sample consists of a single component, or is a mixture of several distinct components. If the material is multicomponent it must be separated and the individual components analysed separately. 2) Powder samples mainly represent precursor stages in the nuclear fuel cycle, and the microstructural analysis gives information on the production process and conditions (for example, the grain size in PuO 2 platelets produced by the calcination of oxalate precipitate, and the size and thickness distributions of the platelets themselves). 3) Powder samples can be mixed with other compounds with the deliberate intention of confusing the chemical or isotopic analysis of suspect materials. However the microstructural fingerprint of a component cannot
Spatial distribution and habitat characterisation of Anopheles larvae along the Kenyan coast.

Science.gov (United States)

Mwangangi, Joseph M; Mbogo, Charles M; Muturi, Ephantus J; Nzovu, Joseph G; Githure, John I; Yan, Guiyun; Minakawa, Noboru; Novak, Robert; Beier, John C

2007-03-01

A study was conducted to characterise larval habitats and to determine spatial heterogeneity of the Anopheles mosquito larvae. The study was conducted from May to June 1999 in nine villages along the Kenyan coast. Aquatic habitats were sampled by use of standard dipping technique. The habitats were characterised based on size, pH, distance to the nearest house, coverage of canopy, surface debris, algae and emergent plants, turbidity, substrate, and habitat type. A total of 110 aquatic habitats like stream pools (n=10); puddles (n=65); tire tracks (n=5); ponds (n=5) and swamps (n=25) were sampled in nine villages located in three districts of the Kenyan coast. A total of 7,263 Anopheles mosquito larvae were collected, 63.9% were early instars and 36.1% were late instars. Morphological identification of the III and IV instar larvae by use of microscopy yielded 90.66% (n=2377) Anopheles gambiae Complex, 0.88% (n=23) An. funestus, An. coustani 7.63% (n=200), An. rivulorum 0.42% (n=11), An. pharoensis 0.19% (n=5), An. swahilicus 0.08% (n=2), An. wilsoni 0.04% (n=1) and 0.11% (n=3) were unidentified. A subset of the An. gambiae Complex larvae identified morphologically, was further analysed using rDNA-PCR technique resulting in 68.22% (n=1290) An. gambiae s.s., 7.93% (n=150) An. arabiensis and 23.85% (n=451) An. merus. Multiple logistic regression model showed that emergent plants (p = 0.019), and floating debris (p = 0.038) were the best predictors of An. gambiae larval abundance in these habitats. Habitat type, floating debris and emergent plants were found to be the key factors determining the presence of Anopheles larvae in the habitats. For effective larval control, the type of habitat should be considered and most productive habitat type be given a priority in the mosquito abatement programme.
Compositional and structural characterisation of GaSb and GaInSb

International Nuclear Information System (INIS)

Corregidor, V.; Alves, E.; Alves, L.C.; Barradas, N.P.; Duffar, Th.; Franco, N.; Marques, C.; Mitric, A.

2005-01-01

Low band gap III-V semiconductors are researched for applications in thermophotovoltaic technology. GaSb crystal is often used as a substrate. Ga 1-x In x Sb is also a promising substrate material, because its lattice parameters can be adjusted by controlling x. We used a new method to synthesise GaSb and GaInSb, in which a high frequency alternate magnetic field is used to heat, to melt and to mix the elements. We present a compositional and structural characterisation of the materials using a combination of complementary techniques. Rutherford backscattering was used to determine accurately the composition of the GaSb. With proton induced X-ray emission in conjunction with a 3 x 3 μm 2 micro-beam we studied the homogeneity of the samples. Structural analysis and phase identification were done with X-ray diffraction. The results for GaSb show a homogeneous composition while the GaInSb samples were found to be strongly heterogeneous at the end of the ingot. The ingots produced are competitive feed material, when compared to other growth techniques, to be used in a second step for the production of good quality ternary crystals
Detection and molecular characterisation of equine infectious anaemia virus from field outbreaks in Slovenia.

Science.gov (United States)

Kuhar, U; Završnik, J; Toplak, I; Malovrh, T

2014-05-01

In 2009, a surprisingly high number of animals seropositive for equine infectious anaemia virus (EIAV; 26 horses from 13 farms) were detected in Slovenia. To develop a polymerase chain reaction (PCR) assay for the detection of the proviral nucleic acid, to phylogenetically characterise the Slovenian EIAV strains and to investigate whether transmission in utero occurred. Cross-sectional clinical study. In total, 26 horses (including 2 foals and 4 pregnant mares) and 4 fetuses were examined in this study. A PCR assay using the EIAV F1 and EIAV R1 primers was designed and tested using genomic DNA extracted from 28 spleen samples, 18 whole blood samples and 17 peripheral blood leucocyte samples. Amplicons of 22 PCRs obtained from the spleen samples were subjected to direct DNA sequencing and phylogenetic analysis. All spleen samples from 22 adult animals were positive for EIAV by PCR, whereas whole blood and the peripheral blood leucocyte samples were positive from only 4 animals. Spleen samples from foals and fetuses were negative by PCR. The Slovenian EIAV sequences could be mapped to 9 different branches of the phylogenetic tree. The PCR was able to detect different EIAV strains from spleen samples of seropositive animals detected in Slovenia. Phylogenetic analysis revealed high genetic diversity of the EIAV strains detected in Slovenia, with their closest relatives being European strains. In utero transmission in pregnant mares did not occur. © 2013 EVJ Ltd.
The subcontinental mantle beneath southern New Zealand, characterised by helium isotopes in intraplate basalts and gas-rich springs

Science.gov (United States)

Hoke, L.; Poreda, R.; Reay, A.; Weaver, S. D.

2000-07-01

New helium isotope data measured in Cenozoic intraplate basalts and their mantle xenoliths are compared with present-day mantle helium emission on a regional scale from thermal and nonthermal gas discharges on the South Island of New Zealand and the offshore Chatham Islands. Cenozoic intraplate basaltic volcanism in southern New Zealand has ocean island basalt affinities but is restricted to continental areas and absent from adjacent Pacific oceanic crust. Its distribution is diffuse and widespread, it is of intermittent timing and characterised by low magma volumes. Most of the 3He/ 4He ratios measured in fluid inclusions in mantle xenocrysts and basalt phenocrysts such as olivine, garnet, and amphibole fall within the narrow range of 8.5 ± 1.5 Ra (Ra is the atmospheric 3He/ 4He ratio) with a maximum value of 11.5 Ra. This range is characteristic of the relatively homogeneous and degassed upper MORB-mantle helium reservoir. No helium isotope ratios typical of the lower less degassed mantle (>12 Ra), such as exemplified by the modern hot-spot region of Hawaii (with up to 32 Ra) were measured. Helium isotope ratios of less than 8 Ra are interpreted in terms of dilution of upper mantle helium with a radiogenic component, due to either age of crystallisation or small-scale mantle heterogeneities caused by mixing of crustal material into the upper mantle. The crude correlation between age of samples and helium isotopes with generally lower R/Ra values in mantle xenoliths compared with host rock phenocrysts and the in general depleted Nd and Sr isotope ratios and the light rare earth element enrichment of the basalts supports derivation of melts as small melt fractions from a depleted upper mantle, with posteruptive ingrowth of radiogenic helium as a function of lithospheric age. In comparison, the regional helium isotope survey of thermal and nonthermal gas discharges of the South Island of New Zealand shows that mantle 3He anomalies in general do not show an obvious

Cloning, expression and characterisation of a novel gene encoding ...

African Journals Online (AJOL)

微软用户

2012-01-12

Jan 12, 2012 ... ... characterisation of a novel gene encoding a chemosensory protein from Bemisia ... The genomic DNA sequence comparisons revealed a 1490 bp intron ... have several conserved sequence motifs, including the. N-terminal ...
Isolation and characterisation of barium sulphate and titanium oxides in monument crusts

Energy Technology Data Exchange (ETDEWEB)

Luis Perez-Rodriguez, Jose; Carmen Jimenez de Haro, Maria del; Maqueda, Celia

2004-10-25

Black crusts from historical ornamental materials contain Ba and Ti. These elements are in low proportion, making their determination difficult and especially the characterisation of the phases in which they are present. For this reason, works on the mineralogical composition of the two elements in black crusts is scarce. Thus the isolation, previous to their characterisation, is important for the study of the surface layer in altered monuments. An acid attack for the isolation of barium sulphate and titanium oxides in black crusts from polluted areas has been used. The acid employed is a mixture of HF, HNO{sub 3} and HClO{sub 4}. The residue isolated by acid attack was analysed by energy dispersive X-ray fluorescence and X-ray diffraction. It was characterised, and the percentages of barite (barium sulphate), anatase (titanium oxide), and rutile (titanium oxide) phases present in the surface layers were calculated.
Characterisation of fume from hyperbaric welding operations

Energy Technology Data Exchange (ETDEWEB)

Ross, John A S; Semple, Sean [Environmental and Occupational Medicine, University of Aberdeen (United Kingdom); Duffin, Rodger [ELEGI Colt Laboratory, University of Edinburgh (United Kingdom); Kelly, Frank [Lung Biology Group, Kings College, University of London (United Kingdom); Seldmann, Joerg; Raab, Andrea, E-mail: j.a.ross@abdn.ac.u [Trace Element Speciation Laboratory, University of Aberdeen (United Kingdom)

2009-02-01

We report preliminary work characterising dust from hyperbaric welding trials carried out at increased pressure in a helium and oxygen atmosphere. Particle size and concentration were measured during welding. Samples for quartz and metal analysis and toxicity assessment were taken from a filter in the local fume extraction system. The residue of dust after metal extraction by nitric acid in hydrogen peroxide predominantly a non-metallic white powder assumed to be dust from welding rod coatings and thermal insulation material. Metallic analysis showed predominantly calcium, from the welding rod coating, and period 4 transition metals such as iron, manganese, magnesium and titanium (inductively coupled mass spectrometry, Agilent 7500c). The presence of zirconium indicated a contribution from grinding. The fume was nanoparticulate in nature with a mean particle diameter of 20-30 nm (MSI Inc WPS 1000XP). It showed an intermediate level of oxidative potential regarding the low-molecular weight respiratory tract lining fluid antioxidants ascorbate and glutathione and caused release of the inflammatory marker IL-8 in a human lung A 549 epithelial cell culture with no indication of cytotoxicity. The study findings have strong implications for the measurement techniques needed to assess fume exposure in hyperbaric welding and the provision of respiratory protection.
Characterisation of hydrides in a zirconium alloy, by EBSD

International Nuclear Information System (INIS)

Ubhi, H.S.; Larsen, K.

2012-01-01

Zirconium alloys are used in nuclear reactors owing to their low capture cross-section for thermal neutrons and good mechanical and corrosion properties. However, they do suffer from delayed hydrogen cracking (DHC) due to formation of hydride particles. This study shows how the electron back-scatter diffraction (EBSD) technique can be used to characterise hydrides and their orientation relationship with the matrix. Hydrided EB weld specimens were prepared by electro-polishing, characterised using Oxford instruments AZtecHKL EBSD apparatus and software attached to a FEG SEM. Hydrides were found to exist as fine intra granular plates and having the Blackburn orientation relationship, i.e. (0002)Zr//(111)hydride and (1120)Zr//(1-10)hydride. The hydrides were also found to contain sigma 3 boundaries as well as local misorientations. (author)
Physico-chemical characterisation of material fractions in household waste

DEFF Research Database (Denmark)

Götze, Ramona; Boldrin, Alessio; Scheutz, Charlotte

2016-01-01

State-of-the-art environmental assessment of waste management systems rely on data for the physico-chemical composition of individual material fractions comprising the waste in question. To derive the necessary inventory data for different scopes and systems, literature data from different sources...... and backgrounds are consulted and combined. This study provides an overview of physico-chemical waste characterisation data for individual waste material fractions available in literature and thereby aims to support the selection of data fitting to a specific scope and the selection of uncertainty ranges related...... to the data selection from literature. Overall, 97 publications were reviewed with respect to employed characterisation method, regional origin of the waste, number of investigated parameters and material fractions and other qualitative aspects. Descriptive statistical analysis of the reported physico...
Spatial distribution and habitat characterisation of mosquito species ...

African Journals Online (AJOL)

Background: Infections with mosquito-borne parasites are common in human populations inhabiting tropical regions of the world. Malaria is endemic along Kenyan Lake Victoria basin and its vectors are fresh water breeders. However, much less is known about the current spatial distribution and habitat characterisation of ...
A mechanical characterisation on multiple timescales of electroconductive magnetorheological elastomers

Science.gov (United States)

Schümann, M.; Morich, J.; Kaufhold, T.; Böhm, V.; Zimmermann, K.; Odenbach, S.

2018-05-01

Magnetorheological elastomers are a type of smart hybrid material which combines elastic properties of a soft elastomer matrix with magnetic properties of magnetic micro particles. This leads to a material with magnetically controllable mechanical properties of which the magnetorheological effect is the best known. The addition of electroconductive particles to the polymer mix adds electrical properties to the material behaviour. The resulting electrical resistance of the sample can be manipulated by external magnetic fields and mechanical loads. This results in a distinct interplay of mechanical, electrical and magnetic effects with a highly complex time behaviour. In this paper a mechanical characterisation on multiple time scales was conducted to get an insight on the short and long-term electrical and mechanical behaviour of this novel material. The results show a complex resistivity behaviour on several timescales, sensitive to magnetic fields and strain velocity. The observed material exhibits fatigue and relaxation behaviour, whereas the magnetorheological effect appears not to interfere with the piezoresistive properties.
Geophysical characterisation of the groundwater-surface water interface

Science.gov (United States)

McLachlan, P. J.; Chambers, J. E.; Uhlemann, S. S.; Binley, A.

2017-11-01

Interactions between groundwater (GW) and surface water (SW) have important implications for water quantity, water quality, and ecological health. The subsurface region proximal to SW bodies, the GW-SW interface, is crucial as it actively regulates the transfer of nutrients, contaminants, and water between GW systems and SW environments. However, geological, hydrological, and biogeochemical heterogeneity in the GW-SW interface makes it difficult to characterise with direct observations. Over the past two decades geophysics has been increasingly used to characterise spatial and temporal variability throughout the GW-SW interface. Geophysics is a powerful tool in evaluating structural heterogeneity, revealing zones of GW discharge, and monitoring hydrological processes. Geophysics should be used alongside traditional hydrological and biogeochemical methods to provide additional information about the subsurface. Further integration of commonly used geophysical techniques, and adoption of emerging techniques, has the potential to improve understanding of the properties and processes of the GW-SW interface, and ultimately the implications for water quality and environmental health.
Detection and characterisation of Complement protein activity in bovine milk by bactericidal sequestration assay.

Science.gov (United States)

Maye, Susan; Stanton, Catherine; Fitzgerald, Gerald F; Kelly, Philip M

2015-08-01

While the Complement protein system in human milk is well characterised, there is little information on its presence and activity in bovine milk. Complement forms part of the innate immune system, hence the importance of its contribution during milk ingestion to the overall defences of the neonate. A bactericidal sequestration assay, featuring a Complement sensitive strain, Escherichia coli 0111, originally used to characterise Complement activity in human milk was successfully applied to freshly drawn bovine milk samples, thus, providing an opportunity to compare Complement activities in both human and bovine milks. Although not identical in response, the levels of Complement activity in bovine milk were found to be closely comparable with that of human milk. Differential counts of Esch. coli 0111 after 2 h incubation were 6.20 and 6.06 log CFU/ml, for raw bovine and human milks, respectively - the lower value representing a stronger Complement response. Exposing bovine milk to a range of thermal treatments e.g. 42, 45, 65, 72, 85 or 95 °C for 10 min, progressively inhibited Complement activity by increasing temperature, thus confirming the heat labile nature of this immune protein system. Low level Complement activity was found, however, in 65 and 72 °C heat treated samples and in retailed pasteurised milk which highlights the outer limit to which high temperature, short time (HTST) industrial thermal processes should be applied if retention of activity is a priority. Concentration of Complement in the fat phase was evident following cream separation, and this was also reflected in the further loss of activity recorded in low fat variants of retailed pasteurised milk. Laboratory-based churning of the cream during simulated buttermaking generated an aqueous (buttermilk) phase with higher levels of Complement activity than the fat phase, thus pointing to a likely association with the milk fat globule membrane (MFGM) layer.
FragIdent – Automatic identification and characterisation of cDNA-fragments

Directory of Open Access Journals (Sweden)

Goehler Heike

2009-03-01

Full Text Available Abstract Background Many genetic studies and functional assays are based on cDNA fragments. After the generation of cDNA fragments from an mRNA sample, their content is at first unknown and must be assigned by sequencing reactions or hybridisation experiments. Even in characterised libraries, a considerable number of clones are wrongly annotated. Furthermore, mix-ups can happen in the laboratory. It is therefore essential to the relevance of experimental results to confirm or determine the identity of the employed cDNA fragments. However, the manual approach for the characterisation of these fragments using BLAST web interfaces is not suited for larger number of sequences and so far, no user-friendly software is publicly available. Results Here we present the development of FragIdent, an application for the automatic identification of open reading frames (ORFs within cDNA-fragments. The software performs BLAST analyses to identify the genes represented by the sequences and suggests primers to complete the sequencing of the whole insert. Gene-specific information as well as the protein domains encoded by the cDNA fragment are retrieved from Internet-based databases and included in the output. The application features an intuitive graphical interface and is designed for researchers without any bioinformatics skills. It is suited for projects comprising up to several hundred different clones. Conclusion We used FragIdent to identify 84 cDNA clones from a yeast two-hybrid experiment. Furthermore, we identified 131 protein domains within our analysed clones. The source code is freely available from our homepage at http://compbio.charite.de/genetik/FragIdent/.
Role of NAA in determination and characterisation of sampling behaviours of multiple elements in CRMs

International Nuclear Information System (INIS)

Tian Weizhi; Ni Bangfa; Wang Pingsheng; Nie Huiling

2002-01-01

Taking the advantage of high precision and accuracy of neutron activation analysis (NAA), sampling constants have been determined for multielements in several international and Chinese reference materials. The suggested technique may be used for finding elements in existing CRMs qualified for quality control (QC) of small size samples (several mg or less), and characterizing sampling behaviors of multielements in new CRMs specifically made for QC of microanalysis. (author)
Quantitative characterisation of complexity and predictability

International Nuclear Information System (INIS)

Badii, R.

1990-04-01

A measure of complexity for sequentially created symbolic patterns is introduced. The underlying grammatical rules are systematically detected in terms of variable-length prefix-free codewords and arranged on a 'logic' tree. Predictions on the scaling structure of the system are then formulated and compared with the observation. The discrepancy between the two, evaluated through a generalisation of the information gain, characterises the complexity of the system, relative to the unfolding scheme. (author) 1 fig., 20 refs
Soil sampling

International Nuclear Information System (INIS)

Fortunati, G.U.; Banfi, C.; Pasturenzi, M.

1994-01-01

This study attempts to survey the problems associated with techniques and strategies of soil sampling. Keeping in mind the well defined objectives of a sampling campaign, the aim was to highlight the most important aspect of representativeness of samples as a function of the available resources. Particular emphasis was given to the techniques and particularly to a description of the many types of samplers which are in use. The procedures and techniques employed during the investigations following the Seveso accident are described. (orig.)
Extensive characterisation of bioactive phenolic constituents from globe artichoke (Cynara scolymus L.) by HPLC-DAD-ESI-QTOF-MS.

Science.gov (United States)

Abu-Reidah, Ibrahim M; Arráez-Román, David; Segura-Carretero, Antonio; Fernández-Gutiérrez, Alberto

2013-12-01

The aim of this work was to characterise the phenolic compounds in artichoke (hearts) by using HPLC coupled to DAD-ESI-QTOF-MS, which proved useful in characterising 61 phenolic and other polar compounds. Notably, of the 61 compounds characterised, 34 new phenolic compounds with their isomers have been tentatively characterised in artichoke for the first time, namely: 3 hydroxybenzoic acids, 17 hydroxycinnamic acids, 4 lignans, 7 flavones, 2 flavonols, and 1 phenol derivative. Moreover, a total of 28 isomers of previously described phenolics have also been detected. The data compiled from the qualitative polyphenol characterisation indicate that the artichoke extract analysed (Blanca de Tudela variety) could be regarded as a bioactive functional food and also as a promising source of antioxidant phenolic compounds. Copyright © 2013 Elsevier Ltd. All rights reserved.
Municipal solid waste composition: Sampling methodology, statistical analyses, and case study evaluation

DEFF Research Database (Denmark)

Edjabou, Vincent Maklawe Essonanawe; Jensen, Morten Bang; Götze, Ramona

2015-01-01

Sound waste management and optimisation of resource recovery require reliable data on solid waste generation and composition. In the absence of standardised and commonly accepted waste characterisation methodologies, various approaches have been reported in literature. This limits both...... comparability and applicability of the results. In this study, a waste sampling and sorting methodology for efficient and statistically robust characterisation of solid waste was introduced. The methodology was applied to residual waste collected from 1442 households distributed among 10 individual sub......-areas in three Danish municipalities (both single and multi-family house areas). In total 17 tonnes of waste were sorted into 10-50 waste fractions, organised according to a three-level (tiered approach) facilitating,comparison of the waste data between individual sub-areas with different fractionation (waste...
The hydrological characterisation and water budget of a South ...

African Journals Online (AJOL)

The hydrological characterisation and water budget of a South African rehabilitated ... Hydrograph separation, based on stable isotopes (18O), revealed that the ... during the summer rains when the wetlands soil moisture deficit is close to 0, ...
Characterisation of Gut Microbiota in Ossabaw and Göttingen Minipigs as Models of Obesity and Metabolic Syndrome

DEFF Research Database (Denmark)

Pedersen, Rebecca; Ingerslev, Hans-Christian; Sturek, Michael

2013-01-01

Background Recent evidence suggests that the gut microbiota is an important contributing factor to obesity and obesity related metabolic disorders, known as the metabolic syndrome. The aim of this study was to characterise the intestinal microbiota in two pig models of obesity namely Göttingen mi...... obese Göttingen and Ossabaw minipigs. In both pig models diet seems to be the defining factor that shapes the gut microbiota as observed by changes in different bacteria divisions between lean and obese minipigs....... minipigs and the Ossabaw minipigs. Methods and Findings The cecal, ileal and colonic microbiota from lean and obese Osabaw and Göttingen minipigs were investigated by Illumina-based sequencing and by high throughput qPCR, targeting the 16S rRNA gene in different phylogenetic groups of bacteria. The weight...
Mass spectrometric characterisation of a condensation product between porphobilinogen and indolyl-3-acryloylglycine in urine of patients with acute intermittent porphyria.

Science.gov (United States)

Marcos, Josep; Ibañez, Maria; Ventura, Rosa; Segura, Jordi; To-Figueras, Jordi; Pozo, Oscar J

2015-07-01

We document the presence of a previously unknown species in the urine of patients with acute intermittent porphyria (AIP). The compound was fully characterised by liquid chromatography tandem mass spectrometry. Interpretation of both full spectrum acquisition and product ion spectra acquired in positive and negative ionisation modes by quadrupole time of flight MS allowed for the identification of a condensation product arising from porphobilinogen (PBG, increased in the urine of AIP patients) and indolyl-3-acryloylglycine (IAG, derived from indolylacrylic acid and present in human urine). The structure was unequivocally confirmed through comparison between the selected reaction monitoring chromatograms obtained from the urinary species and the condensation product qualitatively synthesised in the laboratory. Owing to the large amounts of both PBG and IAG in urine of AIP patients, the possible ex vivo formation of PBG-IAG in urine samples was evaluated. The product was spontaneously formed at room temperature, at 4 °C and even during storage at -20 °C when spiking a control sample with PBG. A positive correlation was found between PBG and PBG-IAG in samples collected from AIP patients. However, no correlation was found between PBG-IAG and IAG. Purified PBG-IAG did not form the characteristic chromogen after application of p-dimethylaminobenzaldehyde in HCl, thus suggesting that the current techniques used to measure PBG in urine of AIP patients based on Ehlrich's reaction do not detect this newly characterised PBG-IAG fraction. Copyright © 2015 John Wiley & Sons, Ltd.
Characterising and modelling regolith stratigraphy using multiple geophysical techniques

Science.gov (United States)

Thomas, M.; Cremasco, D.; Fotheringham, T.; Hatch, M. A.; Triantifillis, J.; Wilford, J.

2013-12-01

Regolith is the weathered, typically mineral-rich layer from fresh bedrock to land surface. It encompasses soil (A, E and B horizons) that has undergone pedogenesis. Below is the weathered C horizon that retains at least some of the original rocky fabric and structure. At the base of this is the lower regolith boundary of continuous hard bedrock (the R horizon). Regolith may be absent, e.g. at rocky outcrops, or may be many 10's of metres deep. Comparatively little is known about regolith, and critical questions remain regarding composition and characteristics - especially deeper where the challenge of collecting reliable data increases with depth. In Australia research is underway to characterise and map regolith using consistent methods at scales ranging from local (e.g. hillslope) to continental scales. These efforts are driven by many research needs, including Critical Zone modelling and simulation. Pilot research in South Australia using digitally-based environmental correlation techniques modelled the depth to bedrock to 9 m for an upland area of 128 000 ha. One finding was the inability to reliably model local scale depth variations over horizontal distances of 2 - 3 m and vertical distances of 1 - 2 m. The need to better characterise variations in regolith to strengthen models at these fine scales was discussed. Addressing this need, we describe high intensity, ground-based multi-sensor geophysical profiling of three hillslope transects in different regolith-landscape settings to characterise fine resolution (i.e. a number of frequencies; multiple frequency, multiple coil electromagnetic induction; and high resolution resistivity. These were accompanied by georeferenced, closely spaced deep cores to 9 m - or to core refusal. The intact cores were sub-sampled to standard depths and analysed for regolith properties to compile core datasets consisting of: water content; texture; electrical conductivity; and weathered state. After preprocessing (filtering, geo
Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I—Characterisation of Thermophysical Properties

Directory of Open Access Journals (Sweden)

Pauline Tranchard

2017-05-01

Full Text Available Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA, Simultaneous Thermal analysis (STA, Laser Flash analysis (LFA, and Fourier Transform Infrared (FTIR analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper. The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering.

Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I—Characterisation of Thermophysical Properties

Science.gov (United States)

Tranchard, Pauline; Samyn, Fabienne; Duquesne, Sophie; Estèbe, Bruno; Bourbigot, Serge

2017-01-01

Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures) were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA), Simultaneous Thermal analysis (STA), Laser Flash analysis (LFA), and Fourier Transform Infrared (FTIR) analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D) model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper). The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering. PMID:28772854
New Zealand guidelines for the collection of groundwater samples for chemical and isotopic analyses

International Nuclear Information System (INIS)

Rosen, M.R.; Cameron, S.G.; Reeves, R.R.; Taylor, C.B.

1999-01-01

Chemical and isotopic analyses of groundwater are important tools for differentiating between the natural composition and human-induced contaminants of groundwater. A comprehensive suite of inorganic water chemical analyses is necessary to characterise waters. The geology of New Zealand is diverse, so it is impractical to characterise a ''typical'' groundwater chemical composition. Each aquifer system should be evaluated individually because the major dissolved species contain useful information about the pathways of water through the soil zone into the aquifer. Analyses of major ions such as chloride, nitrate, potassium and sulphate often give indication of septic systems and agricultural contamination. The minor ions, while most are not considered contaminants, are often indicators of human activity. Iron and manganese are good indicators of Eh potential, which is an important control on the mobility of many heavy metals. The inexpensive inorganic chemical analytical suite should be used as a guide to advisability of more expensive contaminant testing. The purpose of this manual is to provide consistent groundwater sampling guidelines for use throughout New Zealand. Sinton's (1998) guide to groundwater sampling techniques provided a sound basis for the accurate collection of groundwater samples. However Sinton did not address sampling materials and techniques for the collection of samples for ultra trace component analysis or the collection of environmental isotope samples. These important aspects of groundwater sampling have been included in this updated manual. (author). 30 refs., 12 figs., 5 tabs., 1 appendix
Characterisation of Oil-Gas Mixtures by Raman Spectroscopy

DEFF Research Database (Denmark)

Hansen, Susanne Brunsgaard; Berg, Rolf W.; Stenby, Erling Halfdan

2004-01-01

. The present project deals with development of a technique for quick analysis of oil-gas mixtures. The main emphasis is laid on characterisation of gas phases in equilibrium with oil at high pressures and high temperatures by Raman spectroscopy. The Raman technique has a great potential of being useful, due...
Characterisation of middle-distillates by comprehensive two-dimensional gas chromatography (GC x GC): A powerful alternative for performing various standard analysis of middle-distillates.

Science.gov (United States)

Vendeuvre, Colombe; Ruiz-Guerrero, Rosario; Bertoncini, Fabrice; Duval, Laurent; Thiébaut, Didier; Hennion, Marie-Claire

2005-09-09

The detailed characterisation of middle distillates is essential for a better understanding of reactions involved in refining process. Owing to higher resolution power and enhanced sensitivity, comprehensive two-dimensional gas chromatography (GC x GC) is a powerful tool for improving characterisation of petroleum samples. The aim of this paper is to compare GC x GC and various ASTM methods -- gas chromatography (GC), liquid chromatography (LC) and mass spectrometry (MS) -- for group type separation and detailed hydrocarbon analysis. Best features of GC x GC are demonstrated and compared to these techniques in terms of cost, time consumption and accuracy. In particular, a new approach of simulated distillation (SimDis-GC x GC) is proposed: compared to the standard method ASTM D2887 it gives unequal information for better understanding of conversion process.
Visualizing the Sample Standard Deviation

Science.gov (United States)

Sarkar, Jyotirmoy; Rashid, Mamunur

2017-01-01

The standard deviation (SD) of a random sample is defined as the square-root of the sample variance, which is the "mean" squared deviation of the sample observations from the sample mean. Here, we interpret the sample SD as the square-root of twice the mean square of all pairwise half deviations between any two sample observations. This…
Characterisation of metal combustion with DUST code

Energy Technology Data Exchange (ETDEWEB)

García-Cascales, José R., E-mail: jr.garcia@upct.es [DITF, ETSII, Universidad Politécnica de Cartagena, Dr Fleming s/n, 30202 Murcia (Spain); Velasco, F.J.S. [Centro Universitario de la Defensa de San Javier, MDE-UPCT, C/Coronel Lopez Peña s/n, 30730 Murcia (Spain); Otón-Martínez, Ramón A.; Espín-Tolosa, S. [DITF, ETSII, Universidad Politécnica de Cartagena, Dr Fleming s/n, 30202 Murcia (Spain); Bentaib, Ahmed; Meynet, Nicolas; Bleyer, Alexandre [Institut de Radioprotection et Sûreté Nucléaire, BP 17, 92260 Fontenay-aux-Roses (France)

2015-10-15

Highlights: • This paper is part of the work carried out by researchers of the Technical University of Cartagena, Spain and the Institute of Radioprotection and Nuclear Security of France. • We have developed a code for the study of mobilisation and combustion that we have called DUST by using CAST3M, a multipurpose software for studying many different problems of Mechanical Engineering. • In this paper, we present the model implemented in the code to characterise metal combustion which describes the combustion model, the kinetic reaction rates adopted and includes a first comparison between experimental data and calculated ones. • The results are quite promising although suggest that improvement must be made on the kinetic of the reaction taking place. - Abstract: The code DUST is a CFD code developed by the Technical University of Cartagena, Spain and the Institute of Radioprotection and Nuclear Security, France (IRSN) with the objective to assess the dust explosion hazard in the vacuum vessel of ITER. Thus, DUST code permits the analysis of dust spatial distribution, remobilisation and entrainment, explosion, and combustion. Some assumptions such as particle incompressibility and negligible effect of pressure on the solid phase make the model quite appealing from the mathematical point of view, as the systems of equations that characterise the behaviour of the solid and gaseous phases are decoupled. The objective of this work is to present the model implemented in the code to characterise metal combustion. In order to evaluate its ability analysing reactive mixtures of multicomponent gases and multicomponent solids, two combustion problems are studied, namely H{sub 2}/N{sub 2}/O{sub 2}/C and H{sub 2}/N{sub 2}/O{sub 2}/W mixtures. The system of equations considered and finite volume approach are briefly presented. The closure relationships used are commented and special attention is paid to the reaction rate correlations used in the model. The numerical
Commercial Charcoal Characterisation For Water Purification

International Nuclear Information System (INIS)

Saryati; Sumardjo; Sutisna; Handayani, Ari; Suprapti, Siti

2001-01-01

In order to provide a drinking water purification substance, has been studied the charcoal characterisation that based on a porous profile and an adsorption properties of the charcoal. There were using the commercial charcoal like wood charcoals, coconut shell charcoals and activated charcoals. The porous profile was studied by using an electron microscope SEM-EDX and the adsorption properties was studied by using the water sample simulation that contains several metal ions. The concentration of all ions was ten times greater that the maximum ions concentration that permissible in the drinking water. From the grain surface microscopic analysis was shown that the pore structure of the wood charcoal was more regular than the coconut shell charcoal. Mean while the activated charcoal has pore more than wood and coconut shell charcoal. Grains size was not an adsorption parameter. The absorptivitas charcoal was affected by pH solution, but this effect was not linear proportion. There are no significant deference in the adsorptivitas among the tree charcoals that has been studied for Al 3 + , Cr 3+ , Ag 1 +, and Pb 2+ ions the adsorption was large enough (> 60%), for Mn 2+ , Fe 3+ , Se 4+ , Cd 2+ and Ba 2+ ions was 20%-60% dan for Mg 2+ , Na 1+ , Ca 2+ , and Zn 2+ ions was less than 20 %. Generally the wood and coconut shell charcoal absorptivity in the pH 4 solutions was lower than in the pH 5-7 solutions
Characterisation of Oyster Shell for Neutralisation of Bio- Leached ...

African Journals Online (AJOL)

Michael

2016-12-02

Dec 2, 2016 ... (Goodall et al., 2005; O'Connor and Dunne, 1994;. Kydros et al. ... while the gold is concentrated in the iron oxide (hemaetite) residue ..... leaching in the characterisation of complex gold ores” ... Australia, 413 pp. O'Connor ...
The characterisation and immobilisation of Winfrith reactor (SGHWR) wastes - annual report September 1985

International Nuclear Information System (INIS)

Holland, T.R.; Lee, D.J.

1985-09-01

Progress is reported in a programme to characterise both the sludge wastes generated during operation and maintenance of the Winfrith SGHWR, and the solidified end product after cementation. The main programme includes the preparation of more representative simulant sludges, the effect of scale on process parameters and product properties, continued tests on cemented sludge, the active demonstration of sludge homogenisation, sludge dewatering, the characterisation of homogenised active sludge and data evaluation and report presentation. (UK)
Characterising alluvial aquifers in a remote ephemeral catchment (Flinders River, Queensland) using a direct push tracer approach

Science.gov (United States)

Taylor, Andrew R.; Smith, Stanley D.; Lamontagne, Sébastien; Suckow, Axel

2018-01-01

The availability of reliable water supplies is a key factor limiting development in northern Australia. However, characterising groundwater resources in this remote part of Australia is challenging due to a lack of existing infrastructure and data. Here, direct push technology (DPT) was used to characterise shallow alluvial aquifers at two locations in the semiarid Flinders River catchment. DPT was used to evaluate the saturated thickness of the aquifer and estimate recharge rates by sampling for environmental tracers in groundwater (major ions, 2H, 18O, 3H and 14C). The alluvium at Fifteen Mile Reserve and Glendalough Station consisted of a mixture of permeable coarse sandy and gravely sediments and less permeable clays and silts. The alluvium was relatively thin (i.e. < 20 m) and, at the time of the investigation, was only partially saturated. Tritium (3H) concentrations in groundwater was ∼1 Tritium Unit (TU), corresponding to a mean residence time for groundwater of about 12 years. The lack of an evaporation signal for the 2H and 18O of groundwater suggests rapid localised recharge from overbank flood events as the primary recharge mechanism. Using the chloride mass balance technique (CMB) and lumped parameter models to interpret patterns in 3H in the aquifer, the mean annual recharge rate varied between 21 and 240 mm/yr. Whilst this recharge rate is relatively high for a semiarid climate, the alluvium is thin and heterogeneous hosting numerous alluvial aquifers with varied connectivity and limited storage capacity. Combining DPT and environmental tracers is a cost-effective strategy to characterise shallow groundwater resources in unconsolidated sedimentary aquifers in remote data sparse areas.
Characterisations of Partition of Unities Generated by Entire Functions in C^d

DEFF Research Database (Denmark)

Christensen, Ole; Kim, Hong Oh; Kim, Rae Young

2017-01-01

Collections of functions forming a partition of unity play an important role in analysis. In this paper we characterise for any N∈N the entire functions P for which the partition of unity condition ∑n∈ZdP(x+n)χ[0,N]d(x+n)=1 holds for all x∈Rd. The general characterisation leads to various easy wa...
Characterising price fixing: a journey through the looking glass with ANSAC

Directory of Open Access Journals (Sweden)

Kasturi Moodaliyar

2012-10-01

Full Text Available In February 2005 the Supreme Court of Appeal of South Africa ruled that in deciding whether firms have contravened section 4(1(b of the Competition Act 89 of 1998, as amended, by engaging in, for example, ‘per se’ illegal price fixing, the Competition Tribunal must admit evidence relating to the nature, purpose and effect of the horizontal agreement or practice in question. This article examines the economic and legal rationale, as well as the implications, for allowing an appropriate characterisation of conduct to determine whether such conduct falls within the per se prohibition. Firstly, we comment on the rationale behind the per se rule as a standard for the adjudication of certain types of conduct. We analyse a number of cases in the United States, which, post 1979, revolutionised the approach to the strict per se rule. Secondly, we examine how the per se standard is reflected in the particular structure found in section 4(1 of the Competition Act and evaluate whether it makes for a sufficiently robust application of the per se rule. Thirdly, the content of the Supreme Court decision regarding characterisation is critically examined with a view to assessing whether such characterisation is consistent with the policy objective of achieving maximum deterrence of hard core cartel behaviour like price fixing and market division. Finally, we explore and suggest (in the absence of a Tribunal decision a possible framework, based on decision theory, for determining a method of characterisation that is consistent with the robust application of the per se standard and is in line with the Supreme Court ruling.
57Fe Mössbauer and X-ray characterisation of sandstones

International Nuclear Information System (INIS)

Mulaba-Bafubiandi, A. F.; Waanders, F. B.

2013-01-01

Sandstones from the Free State province in South Africa have been mined and processed mainly by small scale and artisanal miners in the rural areas. In the present investigation basic fire proof and water absorption tests, X-ray and γ-ray based characterisation techniques were used to study the sandstones. The collected samples were grouped according to their apparent colour in day light conditions and the elemental analysis showed the presence of a high amount of oxygen (>52%) and silicon (>38%) with Mn, Al, Fe and Ca as major elements in proportions related to the colour distribution of the various sandstones. The uniaxial compressive stress was found to be the highest (56 MPa) for the greyish sandstone and the lowest (8 MPa) for the white sandstone sample, also associated with the lowest (Al+Fe)/Si value of 0.082. The humidity test showed that the 6 % water absorption was lower than the recommended ASTM value of 8 %. The sandstone samples were also subjected to various high temperatures to simulate possible fire conditions and it was found that the non alteration of the mineral species might be one of the reasons why the sandstones are regarded as the most refractory amongst the building materials typically used. Mössbauer spectroscopy revealed that iron is present in all the sandstones, mainly as Fe 3 + with the black sandstone showing an additional presence of 3 % Fe 2 + indicating that a higher iron content coupled to higher silicon content, contributes to an increase in the uniaxial compressive strength.
Nano-scaled semiconductor devices physics, modelling, characterisation, and societal impact

CERN Document Server

Gutiérrez-D, Edmundo A

2016-01-01

This book describes methods for the characterisation, modelling, and simulation prediction of these second order effects in order to optimise performance, energy efficiency and new uses of nano-scaled semiconductor devices.
Characterisation of thin films by phase modulated spectroscopic ellipsometry

International Nuclear Information System (INIS)

Bhattacharyya, D.; Das, N.C.

1998-07-01

A wide variety of thin film coatings, deposited by different techniques and with potential applications in various important areas, have been characterised by the Phase Modulated Spectroscopic Ellipsometer, installed recently in the Spectroscopy Division, B.A.R.C. The Phase Modulated technique provides a faster and more accurate data acquisition process than the conventional ellipsometry. The measured Ellipsometry spectra are fitted with theoretical spectra generated assuming an appropriate model regarding the sample. The fittings have been done objectively by minimising the squared difference (χ 2 ) between the measured and calculated values of the ellipsometric parameters and thus accurate information have been derived regarding the thickness and optical constants (viz, the refractive index and extinction coefficient) of the different layers, the surface roughness and the inhomogeneities present in the layers. Measurements have been done on (i) ion-implanted Si-wafers to investigate the formation of SiC layers, (ii) phenyl- silane coating on glass to investigate the surface modifications achieved for better adsorption of rhodamine dye on glass, (iii) GaN films on quartz to investigate the formation of high quality GaN layers by sputtering of GaAs targets, (iv) Diamond-like-coating (DLC) samples prepared by Chemical Vapour Deposition (CVD) to investigate the optical properties which would ultimately lead to an accurate estimation of the ratio of sp 3 and sp 2 bonded carbon atoms in the films and (v) SS 304 under different surface treatments to investigate the growth of different passive films. (author)
Inadequate Iodine Intake in Population Groups Defined by Age, Life Stage and Vegetarian Dietary Practice in a Norwegian Convenience Sample.

Science.gov (United States)

Brantsæter, Anne Lise; Knutsen, Helle Katrine; Johansen, Nina Cathrine; Nyheim, Kristine Aastad; Erlund, Iris; Meltzer, Helle Margrete; Henjum, Sigrun

2018-02-17

Inadequate iodine intake has been identified in populations considered iodine replete for decades. The objective of the current study is to evaluate urinary iodine concentration (UIC) and the probability of adequate iodine intake in subgroups of the Norwegian population defined by age, life stage and vegetarian dietary practice. In a cross-sectional survey, we assessed the probability of adequate iodine intake by two 24-h food diaries and UIC from two fasting morning spot urine samples in 276 participants. The participants included children ( n = 47), adolescents ( n = 46), adults ( n = 71), the elderly ( n = 23), pregnant women ( n = 45), ovo-lacto vegetarians ( n = 25), and vegans ( n = 19). In all participants combined, the median (95% CI) UIC was 101 (90, 110) µg/L, median (25th, 75th percentile) calculated iodine intake was 112 (77, 175) µg/day and median (25th, 75th percentile) estimated usual iodine intake was 101 (75, 150) µg/day. According to WHOs criteria for evaluation of median UIC, iodine intake was inadequate in the elderly, pregnant women, vegans and non-pregnant women of childbearing age. Children had the highest (82%) and vegans the lowest (14%) probability of adequate iodine intake according to reported food and supplement intakes. This study confirms the need for monitoring iodine intake and status in nationally representative study samples in Norway.
On Logical Characterisation of Human Concept Learning based on Terminological Systems

DEFF Research Database (Denmark)

Badie, Farshad

2018-01-01

The central focus of this article is the epistemological assumption that knowledge could be generated based on human beings' experiences and over their conceptions of the world. Logical characterisation of human inductive learning over their produced conceptions within terminological systems and ...... and analysis of actual human inductive reasoning (and learning). This research connects with the topics 'logic & learning', 'cognitive modelling' and 'terminological knowledge representation'.......The central focus of this article is the epistemological assumption that knowledge could be generated based on human beings' experiences and over their conceptions of the world. Logical characterisation of human inductive learning over their produced conceptions within terminological systems...
Structural, mechanical and light yield characterisation of heat treated LYSO:Ce single crystals for medical imaging applications

CERN Document Server

Mengucci, P; Auffray, E; Barucca, G; Cecchi, C; Chipaux, R; Cousson, A; Davì, F; Di Vara, N; Rinaldi, D; Santecchia, E

2015-01-01

Five single crystals of cerium-doped lutetium yttrium oxyorthosilicate (LYSO:Ce) grown by the Czochralski method were submitted to structural characterisation by X-ray (XRD) and neutron (ND) diffraction, scanning (SEM) and transmission (TEM) electron microscopy and energy dispersive microanalysis (EDS). The Ultimate Tensile Strength (UTS), the Young Modulus (YM) and the Light Yield (LY) of the samples were also measured in order to correlate the mechanical and the optical behaviour of the crystals with the characteristics of their microstructure. Two of the samples analysed were also heat treated at 300 °C for 10 h to evidence possible variations induced by the temperature in the optical and mechanical response of the crystals. Results showed that the mean compositional variations evidenced by the structural analyses do not affect the mechanical and optical behaviour of the samples. On the contrary, the thermal treatment could induce the formation of coherent spherical particles (size 10 to 15 nm), not unifo...
Characterisation of PV CIS module by artificial neural networks. A comparative study with other methods

International Nuclear Information System (INIS)

Almonacid, F.; Rus, C.; Hontoria, L.; Munoz, F.J.

2010-01-01

The presence of PV modules made with new technologies and materials is increasing in PV market, in special Thin Film Solar Modules (TFSM). They are ready to make a substantial contribution to the world's electricity generation. Although Si wafer-based cells account for the most of increase, technologies of thin film have been those of the major growth in last three years. During 2007 they grew 133%. On the other hand, manufacturers provide ratings for PV modules for conditions referred to as Standard Test Conditions (STC). However, these conditions rarely occur outdoors, so the usefulness and applicability of the indoors characterisation in standard test conditions of PV modules is a controversial issue. Therefore, to carry out a correct photovoltaic engineering, a suitable characterisation of PV module electrical behaviour is necessary. The IDEA Research Group from Jaen University has developed a method based on artificial neural networks (ANNs) to electrical characterisation of PV modules. An ANN was able to generate V-I curves of si-crystalline PV modules for any irradiance and module cell temperature. The results show that the proposed ANN introduces a good accurate prediction for si-crystalline PV modules performance when compared with the measured values. Now, this method is going to be applied for electrical characterisation of PV CIS modules. Finally, a comparative study with other methods, of electrical characterisation, is done. (author)
Base adsorption calorimetry for characterising surface acidity: a comparison between pulse flow and conventional ''static'' techniques

International Nuclear Information System (INIS)

Felix, S.P.; Savill-Jowitt, C.; Brown, D.R.

2005-01-01

A pulsed flow adsorption microcalorimeter (pulse-FMC) has been developed by modifying a Setaram 111. It is tested in comparison with a conventional pulsed static adsorption microcalorimeter (pulse-SMC) for characterising surface acidity of solid acid catalysts. Small pulses of 1% ammonia in helium are delivered to an activated catalyst sample and its surface acidity is differentially profiled in terms of the molar enthalpy of ammonia adsorption (ΔH ads o ) using a combination of differential scanning calorimeter (DSC) and a downstream thermal conductivity detector (TCD). The pulsing action and its sequences are controlled by in-house developed software and the TCD output also is logged into a PC. Thus, the pulse-FMC is fully automated. Two sulfonated polystyrene resin-type catalysts, Amberlyst 15 and Amberlyst 35, a zeolite of the type H + -ZSM-5 (CT 410) and an acid activated clay (Fulcat 220) are characterised at appropriate temperatures using both the new technique and the conventional static base adsorption method. ΔH ads o versus surface coverage profiles of all the four catalysts obtained from both pulse-FMC and the conventional method are found to be comparable. Results are interpreted in terms of the extent to which NH 3 adsorption on the catalysts surface is under thermodynamic control in the two methods

A rock characterisation facility consultative document

International Nuclear Information System (INIS)

1992-10-01

This U.K. Nirex Ltd., consultative document describes a proposed underground rock characterisation facility, east of Sellafield, for conducting geophysical surveys as a basis for refining long-term safety analysis of an underground repository for intermediate-level and low-level radioactive wastes. Planning application will be submitted in 1993. The construction of shafts and galleries is described and the site's geologic, topographical, climatic and archaeological features discussed. The effects to the local environment and on local populations and other socio-economic factors are discussed. (UK)
Electronic cigarettes: product characterisation and design considerations

OpenAIRE

Brown, Christopher J; Cheng, James M

2014-01-01

Objective To review the available evidence regarding electronic cigarette (e-cigarette) product characterisation and design features in order to understand their potential impact on individual users and on public health. Methods Systematic literature searches in 10 reference databases were conducted through October 2013. A total of 14 articles and documents and 16 patents were included in this analysis. Results Numerous disposable and reusable e-cigarette product options exist, representing w...
Characterisation of radionuclide migration and plant uptake for performance assessment

International Nuclear Information System (INIS)

Mathias, S. A.; Ireson, A. M.; Butler, A. P.; Jackson, B. M.; Wheater, H. S.

2008-01-01

Unsaturated vegetated soils are an important component in performance assessment models used to quantify risks associated with deep engineered repositories for underground radioactive waste disposal. Therefore, experimental studies, funded by Nirex over nearly 20 years, have been undertaken at Imperial College to study the transfer of radionuclides (Cl-36, I-129, Tc-99) from contaminated groundwater into crops. In parallel to this has been a modelling programme to aid interpretation of the experimental data, obtain parameter values characterising transport in soil and plant uptake and provide new representations of near-surface processes for performance assessment. A particular challenge in achieving these objectives is that the scale of the experimental work (typically ≤1 m) is much smaller than that required in performance assessment. In this paper, a new methodology is developed for up-scaling model results obtained at the experimental scale for use in catchment scale models. The method is based on characterising soil heterogeneity using soil texture. This has the advantage of allowing hydrological and radionuclide transport parameters to be correlated in a consistent manner. An initial investigation into the calculation of effective (i.e. up-scaled) hydrological and transport parameters has been undertaken and shows the results to be potentially highly (and non-linearly) sensitive to soil properties. Consequently, they have important implications for future site characterisation programmes supporting a proposed underground waste repository. (authors)
Characterisation of a novel reverse-biased PPD CMOS image sensor

Science.gov (United States)

Stefanov, K. D.; Clarke, A. S.; Ivory, J.; Holland, A. D.

2017-11-01

A new pinned photodiode (PPD) CMOS image sensor (CIS) has been developed and characterised. The sensor can be fully depleted by means of reverse bias applied to the substrate, and the principle of operation is applicable to very thick sensitive volumes. Additional n-type implants under the pixel p-wells, called Deep Depletion Extension (DDE), have been added in order to eliminate the large parasitic substrate current that would otherwise be present in a normal device. The first prototype has been manufactured on a 18 μm thick, 1000 Ω .cm epitaxial silicon wafers using 180 nm PPD image sensor process at TowerJazz Semiconductor. The chip contains arrays of 10 μm and 5.4 μm pixels, with variations of the shape, size and the depth of the DDE implant. Back-side illuminated (BSI) devices were manufactured in collaboration with Teledyne e2v, and characterised together with the front-side illuminated (FSI) variants. The presented results show that the devices could be reverse-biased without parasitic leakage currents, in good agreement with simulations. The new 10 μm pixels in both BSI and FSI variants exhibit nearly identical photo response to the reference non-modified pixels, as characterised with the photon transfer curve. Different techniques were used to measure the depletion depth in FSI and BSI chips, and the results are consistent with the expected full depletion.
Biosorption of mercury from aqueous solutions using highly characterised peats

Directory of Open Access Journals (Sweden)

A.M. Rizzuti

2015-02-01

Full Text Available This research investigated the biosorption of mercury from aqueous solutions by six highly characterised peats. Samples of the peats were tested both in unaltered condition and after being treated with hydrochloric acid (HCl to free up any occupied exchange sites. Other variables tested were sample dose, contact time, mixing temperature, and the concentration and pH of the mercury solution. Desorption studies were also performed, and tests were done to determine whether the peats could be re-used for mercury biosorption. The results indicate that all six peat types biosorb mercury from aqueous solutions extremely well (92−100 % removal and that their mercury removal capacities are not significantly affected by manipulation of the various factors tested. The factor that had the greatest impact on the mercury removal capacities of the peats was the pH of the mercury solution. The optimal mercury solution pH for mercury removal was in the range 5−7 for four of the peats and in the range 2−3 for the other two. The desorption results indicate that it may be possible to recover up to 41 % of the removed mercury. All of the peat types tested can be repeatedly re-used for additional mercury biosorption cycles. Hence, their disposal should not become a hazardous waste problem.
Listeria monocytogenes-carrying consortia in food industry. Composition, subtyping and numerical characterisation of mono-species biofilm dynamics on stainless steel.

Science.gov (United States)

Rodríguez-López, Pedro; Saá-Ibusquiza, Paula; Mosquera-Fernández, Maruxa; López-Cabo, Marta

2015-08-03

In order to find out how real Listeria monocytogenes-carrying biofilms are in industrial settings, a total of 270 environmental samples belonging to work surfaces from fish (n = 123), meat (n = 75) and dairy industries (n = 72) were analysed in order to detect L. monocytogenes. 12 samples were positive for L. monocytogenes and a total of 18 different species were identified as accompanying microbiota in fish and meat industry. No L. monocytogenes was found in samples from dairy industry. Molecular characterisation combining results of AscI and ApaI macrorestriction PFGE assays yielded 7 different subtypes of L. monocytogenes sharing in 71.43% of cases the same serogroup (1/2a-3a). Results from dynamic numerical characterisation between L. monocytogenes monospecies biofilms on stainless steel (SS) using MATLAB-based tool BIOFILMDIVER demonstrated that except in isolate A1, in which a significant increase in the percentage of covered area (CA), average diffusion distance (ADD) and maximum diffusion distance (MDD) was observed after 120 h of culture, no significant differences were observed in the dynamics of the rest of the L. monocytogenes isolates. Quantitative dual-species biofilm association experiments performed on SS indicated that L. monocytogenes cell counts presented lower values in mixed-species cultures with certain species at 24 and 48 h compared with mono-species culture. However, they remained unaltered after 72 h except when co-cultured with Serratia fonticola which presented differences in all sampling times and was also the dominant species within the dual-species biofilm. When considering frequency of appearance of accompanying species, an ecological distribution was demonstrated as Escherichia coli appeared to be the most abundant in fish industry and Carnobacterium spp. in meat industry. Copyright © 2015 Elsevier B.V. All rights reserved.
Characterisation of large zooplankton sampled with two different gears during midwinter in Rijpfjorden, Svalbard

Directory of Open Access Journals (Sweden)

Błachowiak-Samołyk Katarzyna

2017-12-01

Full Text Available During a midwinter cruise north of 80°N to Rijpfjorden, Svalbard, the composition and vertical distribution of the zooplankton community were studied using two different samplers 1 a vertically hauled multiple plankton sampler (MPS; mouth area 0.25 m2, mesh size 200 μm and 2 a horizontally towed Methot Isaacs Kidd trawl (MIK; mouth area 3.14 m2, mesh size 1500 μm. Our results revealed substantially higher species diversity (49 taxa than if a single sampler (MPS: 38 taxa, MIK: 28 had been used. The youngest stage present (CIII of Calanus spp. (including C. finmarchicus and C. glacialis was sampled exclusively by the MPS, and the frequency of CIV copepodites in MPS was double that than in MIK samples. In contrast, catches of the CV-CVI copepodites of Calanus spp. were substantially higher in the MIK samples (3-fold and 5-fold higher for adult males and females, respectively. The MIK sampling clearly showed that the highest abundances of all three Thysanoessa spp. were in the upper layers, although there was a tendency for the larger-sized euphausiids to occur deeper. Consistent patterns for the vertical distributions of the large zooplankters (e.g. ctenophores, euphausiids collected by the MPS and MIK samplers provided more complete data on their abundances and sizes than obtained by the single net. Possible mechanisms contributing to the observed patterns of distribution, e.g. high abundances of both Calanus spp. and their predators (ctenophores and chaetognaths in the upper water layers during midwinter are discussed.
Quantifying Human Response: Linking metrological and psychometric characterisations of Man as a Measurement Instrument

International Nuclear Information System (INIS)

Pendrill, L R; Fisher, William P Jr

2013-01-01

A better understanding of how to characterise human response is essential to improved person-centred care and other situations where human factors are crucial. Challenges to introducing classical metrological concepts such as measurement uncertainty and traceability when characterising Man as a Measurement Instrument include the failure of many statistical tools when applied to ordinal measurement scales and a lack of metrological references in, for instance, healthcare. The present work attempts to link metrological and psychometric (Rasch) characterisation of Man as a Measurement Instrument in a study of elementary tasks, such as counting dots, where one knows independently the expected value because the measurement object (collection of dots) is prepared in advance. The analysis is compared and contrasted with recent approaches to this problem by others, for instance using signal error fidelity
Modelling, analysis and validation of microwave techniques for the characterisation of metallic nanoparticles

Science.gov (United States)

Sulaimalebbe, Aslam

In the last decade, the study of nanoparticle (NP) systems has become a large and interesting research area due to their novel properties and functionalities, which are different from those of the bulk materials, and also their potential applications in different fields. It is vital to understand the behaviour and properties of nano-materials aiming at implementing nanotechnology, controlling their behaviour and designing new material systems with superior performance. Physical characterisation of NPs falls into two main categories, property and structure analysis, where the properties of the NPs cannot be studied without the knowledge of size and structure. The direct measurement of the electrical properties of metal NPs presents a key challenge and necessitates the use of innovative experimental techniques. There have been numerous reports of two/four point resistance measurements of NPs films and also electrical conductivity of NPs films using the interdigitated microarray (IDA) electrode. However, using microwave techniques such as open ended coaxial probe (OCP) and microwave dielectric resonator (DR) for electrical characterisation of metallic NPs are much more accurate and effective compared to other traditional techniques. This is because they are inexpensive, convenient, non-destructive, contactless, hazardless (i.e. at low power) and require no special sample preparation. This research is the first attempt to determine the microwave properties of Pt and Au NP films, which were appealing materials for nano-scale electronics, using the aforementioned microwave techniques. The ease of synthesis, relatively cheap, unique catalytic activities and control over the size and the shape were the main considerations in choosing Pt and Au NPs for the present study. The initial phase of this research was to implement and validate the aperture admittance model for the OCP measurement through experiments and 3D full wave simulation using the commercially available Ansoft
High-resolution melt-curve analysis of random-amplified-polymorphic-DNA markers, for the characterisation of pathogenic Leptospira

DEFF Research Database (Denmark)

Tulsiani, Suhella; Craig, S B; Graham, G C

2010-01-01

A new test for pathogenic Leptospira isolates, based on RAPD-PCR and high-resolution melt (HRM) analysis (which measures the melting temperature of amplicons in real time, using a fluorescent DNA-binding dye), has recently been developed. A characteristic profile of the amplicons can be used...... typed against 13 previously published RAPD primers, using a real-time cycler (the Corbett Life Science RotorGene 6000) and the optimised reagents from a commercial kit (Quantace SensiMix). RAPD-HRM at specific temperatures generated defining amplicon melt profiles for each of the tested serovars....... These profiles were evaluated as difference-curve graphs generated using the RotorGene software package, with a cut-off of at least 8 'U' (plus or minus). The results demonstrated that RAPD-HRM can be used to measure serovar diversity and establish identity, with a high degree of stability. The characterisation...
Characterisation of cemented/bituminized LAW and MAW waste products

International Nuclear Information System (INIS)

Vejmelka, P.; Johnsen, P.; Kluger, W.; Koester, R.

1987-01-01

In the context of work for characterising low and medium activity waste products, investigations were carried out to determine the release of radioactivity from binding waste in given accidents, such as mechanical and thermal loading for the operating phase of a final store. The effects of mechanical loads on MAW cement products and the effects of thermal laods on MAW cement and MAW bitumen products were examined. The release of fine dust reaching the lungs, with a particle size of ≤10 μm from a 200 litre roller seam cement binder with a maximum mechanical load of 3x10 5 Nm covering the accident case is about 1.5 g and therefore corresponds to ≅ 10 -4 % of the total radio-activity inventory for homogeneous products. With thermal loading (60 minute oil fire, 800 0 C) ≅ 10 -3 % of the radioactivity inventory is released via the release of water from the waste binder. The activity release of MAW bitumen products containing NaNO 3 (175 litre drum) with thermal load is considerably higher, as due to the NaNO 3 content of the products, after an induction period of about 20 minutes there is an exothermal reaction between the bitumen and the NaNO 3 , which leads to burning of the bitumen with considerable aerosol formation. The Na losses are about 32% and the Pu losses, derived from the results of laboratory experiments with samples containing Eu and Pu and samples containing Eu on the original size, are only 15% maximum, even with complete burn up. It was shown for all the investigations with samples of the original size that the effects of the load cases considered can be reduced or completely avoided by additional packing (concrete shielding). (orig./RB) [de
The Internet of Samples in the Earth Sciences (iSamples)

Science.gov (United States)

Carter, M. R.; Lehnert, K. A.

2015-12-01

Across most Earth Science disciplines, research depends on the availability of samples collected above, at, and beneath Earth's surface, on the moon and in space, or generated in experiments. Many domains in the Earth Sciences have recently expressed the need for better discovery, access, and sharing of scientific samples and collections (EarthCube End-User Domain workshops, 2012 and 2013, http://earthcube.org/info/about/end-user-workshops), as has the US government (OSTP Memo, March 2014). The Internet of Samples in the Earth Sciences (iSamples) is an initiative funded as a Research Coordination Network (RCN) within the EarthCube program to address this need. iSamples aims to advance the use of innovative cyberinfrastructure to connect physical samples and sample collections across the Earth Sciences with digital data infrastructures to revolutionize their utility for science. iSamples strives to build, grow, and foster a new community of practice, in which domain scientists, curators of sample repositories and collections, computer and information scientists, software developers and technology innovators engage in and collaborate on defining, articulating, and addressing the needs and challenges of physical samples as a critical component of digital data infrastructure. A primary goal of iSamples is to deliver a community-endorsed set of best practices and standards for the registration, description, identification, and citation of physical specimens and define an actionable plan for implementation. iSamples conducted a broad community survey about sample sharing and has created 5 different working groups to address the different challenges of developing the internet of samples - from metadata schemas and unique identifiers to an architecture of a shared cyberinfrastructure for collections, to digitization of existing collections, to education, and ultimately to establishing the physical infrastructure that will ensure preservation and access of the physical
Surface characterisation of synthetic coal chars made from model compounds

Energy Technology Data Exchange (ETDEWEB)

Arenillas, A.; Pevida, C.; Rubiera, F.; Palacios, J.M.; Navarrete, R.; Denoyel, R.; Rouquerol, J.; Pis, J.J. [Instituto Nacional del Carbon, CSIC, Oviedo (Spain)

2004-07-01

Knowledge of surface properties is essential for understanding the reaction mechanisms involved in several coal conversion processes. However, due to the complexity and heterogeneity of coal this is rather difficult and the use of known model compounds could be a valuable tool. Single model compounds have been widely used, but they give a quite simplified picture. In this work a mixture of model compounds in a phenol-formaldehyde matrix was cured in order to create cross-linked structures. The obtained synthetic coal was pyrolysed in a fixed bed reactor, under helium atmosphere. The surface composition of the chars was evaluated by XPS, adsorption gravimetry of water vapour, temperature-programmed desorption and potentiometric titration. Texture was characterised by N{sub 2} and CO{sub 2} adsorption isotherms at 77 and 273 K, respectively, and immersion calorimetry in benzene. The results obtained from the different techniques were contrasted in order to give an overview of the surface properties (chemical and physical) of the samples studied. Chars obtained under the same operating conditions from a high volatile bituminous coal were used as a reference.
Development of comprehensive techniques for coastal site characterisation. (1) Strategic overview

International Nuclear Information System (INIS)

Ota, Kunio; Amano, Kenji; Niizato, Tadafumi; Alexander, W. Russell; Yamanaka, Yoshiaki

2011-01-01

Any assessment of long-term repository safety will require development of a set of analyses and arguments to demonstrate the persistence of the key safety functions of the geological environment up to several hundred thousand years into the future. However, likely future global climatic and sea-level fluctuations and uplift/subsidence would result in a dramatic change in the location of the current coastline with a subsequent significant change to hydraulic and hydrochemical conditions at coastal sites. It is thus of great importance in the Japanese disposal programme to establish comprehensive techniques for coastal site characterisation. To this end, a systematic framework, which is known as a 'Geosynthesis Data Flow Diagram', has been formulated, which outlines a basic radmap of the geosynthesis methodology for characterising temporal and spatial changes of various properties and processes of coastal sites, with particular focus on the palaeohydrogeology. A basic strategy for stepwise surface-based investigations has also been proposed, which incorporates the geosynthesis methodology in an effective manner. This Technique has been introduced in an ongoing collaborative programme for characterising the coastal geological environment around Horonobe in northern Hokkaido, Japan, and now tested and optimised based on accumulated technical knowledge and experience during the progress of the investigations. (author)
Large-scale deployment of the Global Trigger Tool across a large hospital system: refinements for the characterisation of adverse events to support patient safety learning opportunities.

Science.gov (United States)

Good, V S; Saldaña, M; Gilder, R; Nicewander, D; Kennerly, D A

2011-01-01

The Institute for Healthcare Improvement encourages use of the Global Trigger Tool to objectively determine and monitor adverse events (AEs). Baylor Health Care System (BHCS) is an integrated healthcare delivery system in North Texas. The Global Trigger Tool was applied to BHCS's eight general acute care hospitals, two inpatient cardiovascular hospitals and two rehabilitation/long-term acute care hospitals. Data were collected from a monthly random sample of charts for each facility for patients discharged between 1 July 2006 and 30 June 2007 by external professional nurse auditors using an MS Access Tool developed for this initiative. In addition to the data elements recommended by Institute for Healthcare Improvement, BHCS developed fields to permit further characterisation of AEs to identify learning opportunities. A structured narrative description of each identified AE facilitated text mining to further characterise AEs. INITIAL FINDINGS: Based on this sample, AE rates were found to be 68.1 per 1000 patient days, or 50.8 per 100 encounters, and 39.8% of admissions were found to have ≥1 AE. Of all AEs identified, 61.2% were hospital-acquired, 10.1% of which were associated with a National Coordinating Council - Medical Error Reporting and Prevention harm score of "H or I" (near death or death). To enhance learning opportunities and guide quality improvement, BHCS collected data-such as preventability and AE source-to characterise the nature of AEs. Data are provided regularly to hospital teams to direct quality initiatives, moving from a general focus on reducing AEs to more specific programmes based on patterns of harm and preventability.
The mechanical response of lithographically defined break junctions

International Nuclear Information System (INIS)

Huisman, E. H.; Bakker, F. L.; Wees, B. J. van; Trouwborst, M. L.; Molen, S. J. van der

2011-01-01

We present an experimental study on the mechanical response of lithographically defined break junctions by measuring atomic chain formation, tunneling traces and Gundlach oscillations. The calibration factor, i.e., the ratio between the electrode movement and the bending of the substrate, is found to be 2.5 times larger than expected from a simple mechanical model. This result is consistent with previous finite-element calculations. Comparing different samples, the mechanical response is found to be similar for electrode separations >4 A. However, for smaller electrode separations significant sample-to-sample variations appear. These variations are ascribed to differences in the shape of the two electrodes on the atomic scale which cannot be controlled by the fabrication process.
Defining an optimum pumping-time requirement for sampling ground-water wells on the Hanford site

International Nuclear Information System (INIS)

Scharnhorst, N.L.

1982-04-01

The objective was to determine the optimum time period necessary to pump water from a well before a representative sample of the ground water can be obtained. It was assumed that a representative sample has been collected if the concentration of chemical parameters is the same in a number of samples taken consecutively, so that the concentration of parameters does not vary with time of collection. Ground-water samples used in this project were obtained by pumping selected wells on the Hanford Site. At each well, samples were taken at two minute intervals, and on each sample various chemical analyses were performed. Samples were checked for pH, sulfate, iron, specific conductivity, chloride, nitrate and alkalinity. The data showed that pH, alkalinity, sulfate and specific conductivity levels stabilized almost immediately after pumping of the well began. In many wells, the chloride and nitrate levels were unstable throughout the 38-minute sampling period. Iron levels, however, did not behave in either fashion. The concentration of iron in the samples was high when pumping began but dropped rapidly as pumping continued. The best explanation for this is that iron is flushed from the sides of the casing into the well when pumping begins. After several minutes of pumping, most of the dissolved iron is washed from the well casing and the iron concentration reaches a stable plateau representative of the iron concentration in the ground water.Since iron concentration takes longest to stabilize, the optimum pumping time for a well is based on the iron stabilization time for that well
Nutrient characterisation of river inflow into the estuaries of the ...

African Journals Online (AJOL)

Nutrient characterisation of river inflow into the estuaries of the Gouritz Water ... into the estuaries within the Gouritz Water Management Area (WMA) of South Africa. ... Long-term water quality monitoring data (dissolved inorganic nitrogen, i.e. ...
The spatial and temporal characterisation of flooding within the ...

African Journals Online (AJOL)

The inundated area of a wetland is characterised by annual and interannual variability. This paper presents remotely-sensed imagery in order to better understand the spatial and temporal patterns of flooding within the floodplain wetland of the Nyl River, Limpopo Province. A detailed understanding of the hydrological ...
Biochemical and biomechanical characterisation of equine cervical facet joint cartilage.

Science.gov (United States)

O'Leary, S A; White, J L; Hu, J C; Athanasiou, K A

2018-04-15

The equine cervical facet joint is a site of significant pathology. Located bilaterally on the dorsal spine, these diarthrodial joints work in conjunction with the intervertebral disc to facilitate appropriate spinal motion. Despite the high prevalence of pathology in this joint, the facet joint is understudied and thus lacking in viable treatment options. The goal of this study was to characterise equine facet joint cartilage and provide a comprehensive database describing the morphological, histological, biochemical and biomechanical properties of this tissue. Descriptive cadaver studies. A total of 132 facet joint surfaces were harvested from the cervical spines of six skeletally mature horses (11 surfaces per animal) for compiling biomechanical and biochemical properties of hyaline cartilage of the equine cervical facet joints. Gross morphometric measurements and histological staining were performed on facet joint cartilage. Creep indentation and uniaxial strain-to-failure testing were used to determine the biomechanical compressive and tensile properties. Biochemical assays included quantification of total collagen, sulfated glycosaminoglycan and DNA content. The facet joint surfaces were ovoid in shape with a flat articular surface. Histological analyses highlighted structures akin to articular cartilage of other synovial joints. In general, biomechanical and biochemical properties did not differ significantly between the inferior and superior joint surfaces as well as among spinal levels. Interestingly, compressive and tensile properties of cervical facet articular cartilage were lower than those of articular cartilage from other previously characterised equine joints. Removal of the superficial zone reduced the tissue's tensile strength, suggesting that this zone is important for the tensile integrity of the tissue. Facet surfaces were sampled at a single, central location and do not capture the potential topographic variation in cartilage properties. This

Characterisation of chemically-modified proteins by electrospray ionisation mass spectrometry

International Nuclear Information System (INIS)

Bennett, K.L.

1996-09-01

Electrospray mass spectrometry (ESI-MS) has been used to examine a range of intact monoclonal antibodies (MAbs), antibody fragments such as F(ab') 2 , F ab and F c , chemically-modified fragments and a range of other chemically-modified peptides and proteins as part of a broader study aimed at establishing ESI-MS as a method for the characterisation of radioimmunoconjugates (radiolabelled monoclonal antibodies). For example, the addition of up to 10 biotin molecules to the 'papain-sensitive' 50 kDa F ab fragment can be easily detected in ESI mass spectra. For intact MAbs, however, it is only possible to detect average shifts in the mass of intact antibodies following modification. Successful ESI-MS analysis of complexes formed between chelators and other small molecules conjugated to synthetic peptides, hen egg-white Iysozyme (HEL) (M r 14 306) and horse heart myoglobin (M r 16 951) has been demonstrated. ESI-MS offers considerable advantages compared with existing methods for the characterisation of chemically-conjugated proteins including speed and sensitivity of analysis and the capability for obtaining specific structural information. The conditions for ESI-MS of intact MAbs and MAb fragments have been examined in detail and it was found that 150 kDa MAbs generally required lower sample concentration and higher skimmer potentials compared with the 50 kDa F ab fragment and other lower molecular weight proteins. In addition, the m/z range over which ions from MAbs were observed was higher (m/z ∼2000-4500) than for smaller proteins. ESI-MS was also found to be useful for probing the action of the protease papain, that is used to generate MAb fragments (F(ab) '2, F ab and F c ). Further, different sensitivities to papain for different MAb preparations was demonstrated. Finally, the tandem mass spectra of a range of peptides modified by iodine and biotin were examined. In the case of biotinylated peptides, a characteristic fragment ion was identified that could
Assessment and Characterisation of Ireland's Green Tides (Ulva Species).

Science.gov (United States)

Wan, Alex H L; Wilkes, Robert J; Heesch, Svenja; Bermejo, Ricardo; Johnson, Mark P; Morrison, Liam

2017-01-01

Enrichment of nutrients and metals in seawater associated with anthropogenic activities can threaten aquatic ecosystems. Consequently, nutrient and metal concentrations are parameters used to define water quality. The European Union's Water Framework Directive (WFD) goes further than a contaminant-based approach and utilises indices to assess the Ecological Status (ES) of transitional water bodies (e.g. estuaries and lagoons). One assessment is based upon the abundance of opportunistic Ulva species, as an indication of eutrophication. The objective of this study was to characterise Ireland's Ulva blooms through the use of WFD assessment, metal concentrations and taxonomic identity. Furthermore, the study assessed whether the ecological assessment is related to the metal composition in the Ulva. WFD algal bloom assessment revealed that the largest surveyed blooms had an estimated biomass of 2164 metric tonnes (w/w). DNA sequences identified biomass from all locations as Ulva rigida, with the exception of New Quay, which was Ulva rotundata. Some blooms contained significant amounts of As, Cu, Cr, Pb and Sn. The results showed that all metal concentrations had a negative relationship (except Se) with the Ecological Quality Ratio (EQR). However, only in the case of Mn were these differences significant (p = 0.038). Overall, the metal composition and concentrations found in Ulva were site dependent, and not clearly related to the ES. Nevertheless, sites with a moderate or poor ES had a higher variability in the metals levels than in estuaries with a high ES.
Non-Destructive Radiological Characterisation Of Contaminated And Activated Concrete

International Nuclear Information System (INIS)

Cantrel, E.

2005-01-01

The decommissioning of nuclear facilities leads to large quantities of concrete and building material wastes. Radioactivity in building structures arise from very different physical processes such as neutron activation (bioshield), diffusion of the contaminants in the material (primary coolant leakage, maintenance and fuel loading) or aerosol deposition. The variety of the building material also extends the range of faced radiological characteristics. Therefore the minimization of concrete waste generation requires extensive characterisations and the availability of different measurement tools and methods. Up to now, these measurements came from the coring and the radiological analysis of the concrete, which is a destructive, long and costly technique. Looking for alternative solutions, SCK-CEN has started to investigate in collaboration with EDF -research and development and CEA (France) several non destructive methods based on gamma spectroscopy and different spectral examinations using mathematical calibration and modelling tools available on the market. Information on in-depth activity distribution can be derived from in situ gamma spectra by modelling absorption laws (peak to peak ratios) and photons interactions (Compton front) in the bulk of the concrete. As they combine modelling and measurement, the different methodologies being evaluated involve a lot of uncertainty sources linked to the measurement environment, to the knowledge available on site (historical background, material composition), to the operator responsible for the data acquisition and to the performance of the equipment. Therefore a detailed sensitivity analysis is required to define the range of applicability and the performances of the different methods
Assessment and Characterisation of Ireland's Green Tides (Ulva Species)

Science.gov (United States)

Wilkes, Robert J.; Heesch, Svenja; Bermejo, Ricardo; Johnson, Mark P.; Morrison, Liam

2017-01-01

Enrichment of nutrients and metals in seawater associated with anthropogenic activities can threaten aquatic ecosystems. Consequently, nutrient and metal concentrations are parameters used to define water quality. The European Union’s Water Framework Directive (WFD) goes further than a contaminant-based approach and utilises indices to assess the Ecological Status (ES) of transitional water bodies (e.g. estuaries and lagoons). One assessment is based upon the abundance of opportunistic Ulva species, as an indication of eutrophication. The objective of this study was to characterise Ireland’s Ulva blooms through the use of WFD assessment, metal concentrations and taxonomic identity. Furthermore, the study assessed whether the ecological assessment is related to the metal composition in the Ulva. WFD algal bloom assessment revealed that the largest surveyed blooms had an estimated biomass of 2164 metric tonnes (w/w). DNA sequences identified biomass from all locations as Ulva rigida, with the exception of New Quay, which was Ulva rotundata. Some blooms contained significant amounts of As, Cu, Cr, Pb and Sn. The results showed that all metal concentrations had a negative relationship (except Se) with the Ecological Quality Ratio (EQR). However, only in the case of Mn were these differences significant (p = 0.038). Overall, the metal composition and concentrations found in Ulva were site dependent, and not clearly related to the ES. Nevertheless, sites with a moderate or poor ES had a higher variability in the metals levels than in estuaries with a high ES. PMID:28045947
Characterisation of polyhydroxyalkanoate copolymers with controllable four-monomer composition.

Science.gov (United States)

Dai, Yu; Lambert, Lynette; Yuan, Zhiguo; Keller, Jurg

2008-03-20

Polyhydroxyalkanoate (PHA) copolymers comprising the four monomers 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), 3-hydroxy-2-methylvalerate (3HMV) and 3-hydroxy-2-methylbutyrate (3HMB) were generated using the recently discovered Defluviicoccus vanus-related glycogen accumulating organisms (DvGAOs) under anaerobic conditions without applying any nutrient limitations. The composition could be manipulated in a defined range by modifying the ratio of propionate and acetate provided in the feed stream. The PHAs produced were characterised as random copolymers (from propionate alone) or a mixture of random copolymers (from mixture of propionate and acetate) through microstructure analysis using 13C NMR spectroscopy. The sequence distribution of all eight comonomer pairs in the carbonyl region of 3HB and 3HV was identified and assigned with confidence utilising two-dimensional heteronuclear multiple bond coherence (HMBC) spectroscopy. Weight average molecular weights were in the range 390-560 kg/mol. Differential scanning calorimetry (DSC) traces showed that the melting temperature (Tm) varied between 70 and 161 degrees C and glass transition temperature (Tg) ranged from -8 to 0 degrees C. The incorporation of considerable amounts of 3HMV and 3HMB monomer units introduced additional "defects" into the PHBV copolymer structure and hence greatly lowered the crystallinity. The data indicate the potential of these four-monomer PHAs to be employed for practical applications, considering their favourable properties and the cost-effective production process using a mixed culture and simple carbon sources.
A novel textile characterisation approach using an embedded sensor system and segmented textile manipulation

Science.gov (United States)

Fial, Julian; Carosella, Stefan; Langheinz, Mario; Wiest, Patrick; Middendorf, Peter

2018-05-01

This paper investigates the application of sensors on carbon fibre textiles for the purpose of textile characterisation and draping process optimisation. The objective is to analyse a textile's condition during the draping operation and actively manipulate boundary conditions in order to create better preform qualities. Various realisations of textile integrated sensors are presented, focusing on the measurement of textile strain. Furthermore, a complex textile characterisation approach is presented where these sensors shall be implemented in.
Rapporteur's Report of the Workshop on Radiological Characterisation for Decommissioning

International Nuclear Information System (INIS)

Thierfeldt, Stefan

2012-01-01

In April 2012, the Nuclear Energy Agency, in co-operation with Studsvik Nuclear AB, the Swedish Radiation Safety Authority (SSM), Swedish Nuclear Fuel and Waste Management Company (SKB) and AB SVAFO, held a Workshop on Radiological Characterisation in Decommissioning in Studsvik near Nykoeping (Sweden). During three days, a wide range of presentations, posters, discussions and site visits brought together over 120 participants from 23 countries and 4 international organisations, the IAEA, the WNA, the European Commission and the OECD/NEA. Members of the Task Group on Radiological Characterisation for Decommissioning (RCD) of the WPDD were involved in the preparation of the workshop. Many decommissioning projects of all types of nuclear installations have progressed substantially and/or have been completed to brown field or green field conditions, so that it was the right time to bring together operators, regulators, scientists, consultants and contractors to exchange information and views and to evaluate the information on radiological characterisation gained from this multitude of projects. The outcome will be valuable for the large number of decommissioning projects about to start in the near future. The Workshop consisted of 5 topical sessions and a poster session. The topical sessions were complemented by discussions in the plenary and in smaller groups. This report provides a short summary of the various presentations and discussions. It concentrates on the outcome of the presentations, posters and discussions than giving an account of the spoken word
Wastewater treatment plants as a pathway for microplastics: Development of a new approach to sample wastewater-based microplastics.

Science.gov (United States)

Ziajahromi, Shima; Neale, Peta A; Rintoul, Llew; Leusch, Frederic D L

2017-04-01

Wastewater effluent is expected to be a pathway for microplastics to enter the aquatic environment, with microbeads from cosmetic products and polymer fibres from clothes likely to enter wastewater treatment plants (WWTP). To date, few studies have quantified microplastics in wastewater. Moreover, the lack of a standardized and applicable method to identify microplastics in complex samples, such as wastewater, has limited the accurate assessment of microplastics and may lead to an incorrect estimation. This study aimed to develop a validated method to sample and process microplastics from wastewater effluent and to apply the developed method to quantify and characterise wastewater-based microplastics in effluent from three WWTPs that use primary, secondary and tertiary treatment processes. We applied a high-volume sampling device that fractionated microplastics in situ and an efficient sample processing procedure to improve the sampling of microplastics in wastewater and to minimize the false detection of non-plastic particles. The sampling device captured between 92% and 99% of polystyrene microplastics using 25 μm-500 μm mesh screens in laboratory tests. Microplastic type, size and suspected origin in all studied WWTPs, along with the removal efficiency during the secondary and tertiary treatment stages, was investigated. Suspected microplastics were characterised using Fourier Transform Infrared spectroscopy, with between 22 and 90% of the suspected microplastics found to be non-plastic particles. An average of 0.28, 0.48 and 1.54 microplastics per litre of final effluent was found in tertiary, secondary and primary treated effluent, respectively. This study suggests that although low concentrations of microplastics are detected in wastewater effluent, WWTPs still have the potential to act as a pathway to release microplastics given the large volumes of effluent discharged to the aquatic environment. This study focused on a single sampling campaign, with
Biomimetic Coating on Porous Alumina for Tissue Engineering: Characterisation by Cell Culture and Confocal Microscopy

Directory of Open Access Journals (Sweden)

Elizabeth Kolos

2015-06-01

Full Text Available In this study porous alumina samples were prepared and then coated using the biomimetic coating technique using a five times Simulated Body Fluid (5.0SBF as the growth solution. A coating was achieved after pre-treatment with concentrated acid. From elemental analysis, the coating contained calcium and phosphorous, but also sodium and chlorine. Halite was identified by XRD, a sodium chloride phase. Sintering was done to remove the halite phase. Once halite was burnt off, the calcium phosphate crystals were not covered with halite and, therefore, the apatite phases can be clearly observed. Cell culturing showed sufficient cell attachment to the less porous alumina, Sample B, that has more calcium phosphate growth, while the porous alumina, Sample A, with minimal calcium phosphate growth attained very little cell attachment. This is likely due to the contribution that calcium phosphate plays in the attachment of bone-like cells to a bioinert ceramic such as alumina. These results were repeated on both SEM and confocal microscopy analysis. Confocal microscopy was a novel characterisation approach which gave useful information and was a visual aid.
Synthesis and structural characterisation using Rietveld and pair distribution function analysis of layered mixed titanium-zirconium phosphates

International Nuclear Information System (INIS)

Burnell, Victoria A.; Readman, Jennifer E.; Tang, Chiu C.; Parker, Julia E.; Thompson, Stephen P.; Hriljac, Joseph A.

2010-01-01

Crystalline metal (IV) phosphates with variable zirconium-to-titanium molar ratios of general formula (Ti 1-x Zr x )(HPO 4 ) 2 .H 2 O have been prepared by precipitation of soluble salts of the metals with phosphoric acid and heating the amorphous solids in 12 M H 3 PO 4 in an autoclave. The new materials are structurally characterised by Rietveld analysis of synchrotron X-ray powder diffraction data and pair distribution function (PDF) analysis of high energy synchrotron X-ray total scattering data. A broad range of zirconium-titanium phosphate solid solutions were formed showing isomorphous substitution of titanium by zirconium in the α-titanium phosphate lattice and vice versa for titanium substitution into the α-zirconium phosphate lattice. In both cases the solubility is partial with the coexistence of two substituted phases observed in samples with nominal compositions between the solubility limits. - Graphical abstract: Layered phosphates of general formula (Ti 1-x Zr x )(HPO 4 ).H 2 O have been prepared by the hydrothermal treatment of amorphous gels in phosphoric acid and characterised by Rietveld analysis of high resolution synchrotron X-ray powder diffraction data and pair distribution function analysis of high energy synchrotron X-ray total scattering data.
Nanocatalysts for Ethanol Oxidation: Synthesis and Characterisation

OpenAIRE

Bonesi, A.; Triaca, W. E.; Luna, A. M. Castro

2009-01-01

Carb on-supported binary PtSn/C and ternary PtSnNi/C catalysts were prepared for the electro-oxidation of ethanol. The carbon-supported nanoparticles were synthesised by employing a modified polyol methodology and characterised in terms of structure, morphology and composition by using XRD, EDX and TEM techniques. Their electro-catalytic behaviour for ethanol oxidation (EO) was investigated by employing a disc-composite electrode covered by a thin layer of catalyst imbedded in a Nafion polyme...
Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

Energy Technology Data Exchange (ETDEWEB)

Mackie, D.; Robson, J.D.; Withers, P.J. [School of Materials, University of Manchester, Manchester M13 9PL (United Kingdom); Turski, M. [Magnesium Elektron UK, Rake Lane, Manchester, M27 8BF (United Kingdom)

2015-06-15

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al{sub 8}Mn{sub 5} in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallic phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets.
Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

International Nuclear Information System (INIS)

Mackie, D.; Robson, J.D.; Withers, P.J.; Turski, M.

2015-01-01

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al 8 Mn 5 in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallic phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets
Characterisation of nasal Staphylococcus delphini and Staphylococcus pseudintermedius isolates from healthy donkeys in Tunisia.

Science.gov (United States)

Gharsa, H; Slama, K Ben; Gómez-Sanz, E; Gómez, P; Klibi, N; Zarazaga, M; Boudabous, A; Torres, C

2015-07-01

Staphylococcus intermedius group (SIG) bacteria can colonise the nares of some animals but are also emerging pathogens in humans and animals. To analyse SIG nasal carriage in healthy donkeys destined for food consumption in Tunisia and to characterise recovered isolates. Nasal swabs from 100 healthy donkeys were tested for SIG recovery, and isolates were identified by biochemical and molecular methods. Antimicrobial susceptibility of isolates was tested and detection of antimicrobial resistance and virulence genes was performed. Isolates were typed at the clonal level by multilocus sequence typing and SmaI pulsed-field gel electrophoresis. Staphylococcus delphini and Staphylococcus pseudintermedius (included in SIG) were obtained in 19% and 2% of the tested samples, respectively, and one isolate per sample was characterised. All isolates were meticillin susceptible and mecA negative. Most S. delphini and S. pseudintermedius isolates showed susceptibility to all antimicrobials tested, with the exception of 2 isolates resistant to tetracycline (tet(M) gene) or fusidic acid. The following toxin genes were identified (percentage of isolates): lukS-I (100%), lukF-I (9.5%), siet (100%), se-int (90%), seccanine (19%) and expA (9.5%). Thirteen different pulsed-field gel electrophoresis profiles were identified among the 21 SIG isolates. Additionally, the following 9 different sequence types (STs) were detected by multilocus sequence typing, 6 of them new: ST219 (6 isolates), ST12 (5 isolates), ST220 (3 isolates), ST13, ST50, ST193, ST196, ST218 and ST221 (one isolate each). Staphylococcus delphini and S. pseudintermedius are common nasal colonisers of donkeys, generally susceptible to the antimicrobials tested; nevertheless, these SIG isolates contain virulence genes, including the recently described exfoliative gene (expA) and several enterotoxin genes, with potential implications for public health. This is the first description of S. delphini in Tunisia. The
Chemical characterisation of fine particles from biomass burning

Energy Technology Data Exchange (ETDEWEB)

Saarnio, K.

2013-10-15

Biomass burning has lately started to attract attention because there is a need to decrease the carbon dioxide (CO{sub 2}) emissions from the combustion of fossil fuels. Biomass is considered as CO{sub 2} neutral fuel. However, the burning of biomass is one of the major sources of fine particles both at the local and global scale. In addition to the use of biomass as a fuel for heat energy production, biomass burning emissions can be caused, e.g. by slash-and-burn agriculture and wild open-land fires. Indeed, the emissions from biomass burning are crucially important for the assessment of the potential impacts on global climate and local air quality and hence on human health. The chemical composition of fine particles has a notable influence on these impacts. The overall object of this thesis was to gain knowledge on the chemistry of fine particles that originate from biomass burning as well as on the contribution of biomass burning emissions to the ambient fine particle concentrations. For this purpose novel analytical methods were developed and tested in this thesis. Moreover, the thesis is based on ambient aerosol measurements that were carried out in six European countries at 12 measurement sites during 2002-2011. Additionally, wood combustion experiments were conducted in a laboratory. The measurements included a wide range of techniques: filter and impactor samplings, offline chemical analyses (chromatographic and mass spectrometric techniques, thermal-optical method), and online measurements of particles' physical properties and chemical composition (incl. particle number and mass concentrations and size distributions, concentrations of carbonaceous components, water-soluble ions, and tracer compounds). This thesis presents main results of different studies aimed towards chemical characterisation of fine particle emissions from biomass burning. It was found that wood combustion had a significant influence on atmospheric fine particle concentrations in
Gas chromatographic-mass spectrometric characterisation of plant gums in samples from painted works of art.

Science.gov (United States)

Bonaduce, Ilaria; Brecoulaki, Hariclia; Colombini, Maria Perla; Lluveras, Anna; Restivo, Vincenzo; Ribechini, Erika

2007-12-21

This paper presents an analytical GC-MS procedure to study the chemical composition of plant gums, determining aldoses and uronic acids in one step. The procedure is based on the silylation of aldoses and uronic acids, released from plant gums by microwave assisted hydrolysis, and previously converted into the corresponding diethyl-dithioacetals and diethyl-dithioacetal lactones. Using this method only one peak for each compound is obtained, thus providing simple and highly reproducible chromatograms. The analytical procedure was optimised using reference samples of raw plant gums (arabic, karaya, ghatti, guar, locust bean and tragacanth, cherry, plum and peach gums), commercial watercolours and paint layers prepared according to ancient recipes at the Opificio delle Pietre Dure of Florence (Italy). To identify gum media in samples of unknown composition, a decisional schema for the gum identification and the principal component analysis of the relative sugar percentage contents were employed. The procedure was used to study samples collected from wall paintings from Macedonian tombs (4th-3rd centuries bc) and from the Mycenaean "Palace of Nestor" (13th century bc) in Pylos, Greece. The presence of carbohydrates was ascertained and plant gum binders (fruit and a mixture of tragacanth and fruit tree gums) were identified in some of the samples.
The use dynamic avalanching and fractal analysis to characterise uranium oxide powders

International Nuclear Information System (INIS)

Hobbs, J.W.; Rhodes, D.

2000-01-01

Direct thermal denitration is an attractive method of co-converting mixed-metal nitrate solutions of plutonium and uranium into oxide because of its apparent simplicity. Such benefits are often marred by the relatively poor powder quality and handling characteristics, which can be overcome by modifications to the process chemistry. To ensure that powder synthesis routes under assessment require the minimal further processing it is necessary to be able to characterise the powder fully in term of the key fundamental properties. This paper will demonstrate the use of a dynamic avalanching technique, fractal analysis and morphology to assess processing behaviour. The use of dynamic avalanching to uniquely characterise the chaotic flow properties of urania powders has proved successful and results have shown that this technique is capable of detecting small differences in processing behaviour due changes in morphologies and particle size distribution. This technique has promise for being able to provide nearly instantaneous feedback to the powder generation process being monitored (e.g. calcination, milling, mixing). The use of fractals to describe powders is an interesting characterisation tool when combined with morphological shape factors and the flow index. (authors)
Homosexual, gay, and lesbian: defining the words and sampling the populations.

Science.gov (United States)

Donovan, J M

1992-01-01

The lack of both specificity and consensus about definitions for homosexual, homosexuality, gay, and lesbian are first shown to confound comparative research and cumulative understanding because criteria for inclusion within the subject populations are often not consistent. The Description section examines sociolinguistic variables which determine patterns of preferred choice of terminology, and considers how these might impact gay and lesbian studies. Attitudes and style are found to influence word choice. These results are used in the second section to devise recommended definitional limits which would satisfy both communication needs and methodological purposes, especially those of sampling.
The characterisation of molecular boric acid by mass spectrometry and matrix isolation-infrared spectroscopy

International Nuclear Information System (INIS)

Ogden, J.S.; Young, N.A.; Bowsher, B.R.

1987-10-01

Boric acid (H 3 BO 3 ) is used as a soluble neutron absorber in the coolant of pressurised water reactors and will be an important species in defining the fission product chemistry of severe reactor accidents. Mass spectrometry and matrix isolation-infrared spectroscopy have been used to characterise boric acid in the vapour phase and hence assess the implications of any chemical interactions. Crystalline orthoboric acid vaporises to yield molecular H 3 BO 3 when heated in vacuum to approximately 40 0 C. The infrared spectrum of the vapour species isolated in low-temperature nitrogen matrices shows characteristic absorptions at 3668.5 (E'), 1426.2 (E'), 1009.9 (E'), 675.0 (A''), 513.8 (A'') and 448.9 (E') cm -1 , consistent with C 3h symmetry. These spectral assignments are supported by extensive isotope labelling, and by a partial normal co-ordinate analysis. These data will be used to quantify specific thermodynamic functions and hence assist in determining the magnitude of reactions such as boric acid with caesium iodide. (author)
Characterisation of a novel Mannheimia sp from Australian feedlot cattle

DEFF Research Database (Denmark)

Blackall, P.J.; Angen, Øystein; Fegan, N.

2001-01-01

glucosida, M granulomatis, M ruminalis and M varigena - using a range of phenotypic and genotypic methods. Results Phenotypic characterisation indicated that the isolates belonged to the trehalose-negative [Pasteurella] haemolytica complex. This complex has recently been reorganised into five species within...

Microscopic characterisation of suspended graphene grown by chemical vapour deposition

NARCIS (Netherlands)

Bignardi, L.; Dorp, W.F. van; Gottardi, S.; Ivashenko, O.; Dudin, P.; Barinov, A.; de Hosson, J.T.M.; Stöhr, M.; Rudolf, P.

2013-01-01

We present a multi-technique characterisation of graphene grown by chemical vapour deposition (CVD) and thereafter transferred to and suspended on a grid for transmission electron microscopy (TEM). The properties of the electronic band structure are investigated by angle-resolved photoelectron
Characterisation of the Interaction between Toroidal Vortex Structures and Flame Front Propagation

International Nuclear Information System (INIS)

Long, E J; Hargrave, G K; Jarvis, S; Justham, T; Halliwell, N

2006-01-01

Experimental laser diagnostic data is presented for flame characterisation during interactions with toroidal vortices generated in the wake of an annular obstacle. A novel twin section combustion chamber has been utilised to allow the controlled formation of stable eddy structures into which a flame front can propagate. High speed laser sheet visualisation was employed to record the flow field and flame front temporal development and high-speed digital particle image velocimetry was used to quantify the velocity field of the unburnt mixture ahead of the flame front. Results provide characterisation of the toroidal vortex/flame front interaction for a range of vortex scales of and recirculation strengths
Characterisation of the Interaction between Toroidal Vortex Structures and Flame Front Propagation

Energy Technology Data Exchange (ETDEWEB)

Long, E J; Hargrave, G K; Jarvis, S; Justham, T; Halliwell, N [Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, Loughborough, Leicestershire, LE11 3TU (United Kingdom)

2006-07-15

Experimental laser diagnostic data is presented for flame characterisation during interactions with toroidal vortices generated in the wake of an annular obstacle. A novel twin section combustion chamber has been utilised to allow the controlled formation of stable eddy structures into which a flame front can propagate. High speed laser sheet visualisation was employed to record the flow field and flame front temporal development and high-speed digital particle image velocimetry was used to quantify the velocity field of the unburnt mixture ahead of the flame front. Results provide characterisation of the toroidal vortex/flame front interaction for a range of vortex scales of and recirculation strengths.
Characterisation of the Interaction between Toroidal Vortex Structures and Flame Front Propagation

Science.gov (United States)

Long, E. J.; Hargrave, G. K.; Jarvis, S.; Justham, T.; Halliwell, N.

2006-07-01

Experimental laser diagnostic data is presented for flame characterisation during interactions with toroidal vortices generated in the wake of an annular obstacle. A novel twin section combustion chamber has been utilised to allow the controlled formation of stable eddy structures into which a flame front can propagate. High speed laser sheet visualisation was employed to record the flow field and flame front temporal development and high-speed digital particle image velocimetry was used to quantify the velocity field of the unburnt mixture ahead of the flame front. Results provide characterisation of the toroidal vortex/flame front interaction for a range of vortex scales of and recirculation strengths.
Growth and characterisation of lead iodide single crystals

International Nuclear Information System (INIS)

Tonn, Justus

2012-01-01

The work in hand deals with the growth and characterisation of lead iodide (PbI 2 ) single crystals. PbI 2 is regarded as a promising candidate for low-noise X- and gamma ray detection at room temperature. Its benefits if compared to conventional materials like HgI 2 , CdTe, Si, or GaAs lie in a band gap energy of 2.32 eV, an excellent ability to absorb radiation, and a high electrical resistivity. For an application of PbI 2 as detector material the growth and characterisation of crystals with high chemical and structural quality is extremely challenging. In light of this, the effectiveness of zone purification of the PbI 2 used for crystal growth was confirmed by spectroscopic analysis. Furthermore, technological aspects during processing of purified PbI 2 were investigated. With the help of thermal analysis, a correlation was found between the degree of exposing the source material to oxygen from the air and the structural quality of the resulting crystals. A hydrogen treatment was applied to PbI 2 as an effective method for the removal of oxidic pollutions, which resulted in a significant reduction of structural defects like polytypic growth and stress-induced cracking. The growth of PbI 2 single crystals was, among others, carried out by the Bridgman-Stockbarger method. In this context, much effort was put on the investigation of influences resulting from the design and preparation of ampoules. For the first time, crystal growth of PbI 2 was also carried out by the Czochralski method. If compared to the Bridgman-Stockbarger method, the Czochralski technique allowed a significantly faster growth of nearly crack-free crystals with a reproducible predetermination of crystallographic orientation. By an optimised sample preparation of PbI 2 , surface orientations perpendicular to the usually cleaved (0001) plane were realised. It is now possible to determine the material properties along directions which were so far not accessible. Thus, for example, the ratio of
X-ray characterisation of nanostructured materials

DEFF Research Database (Denmark)

Oddershede, Jette

X-ray powder di®raction (XRPD) is an excellent tool for characterising the bulk structure of crystalline materials. Along with the growing interest in exploiting materials with decreasing particle sizes and increasing number of defects, factors that complicate the traditional interpretation...... of the experi- mental XRPD patterns, the need for new interpretation methods has arisen. The method described in the present thesis is by no means new, in fact it was developed by Debye in 1915. However, the Debye method it is rather computationally heavy, so in practise it is only applicable to the X-ray char...
The glasses of the transept’s rosette of the cathedral of Tarragona: characterisation, classification and decay

Directory of Open Access Journals (Sweden)

García-Vallès, M.

2002-04-01

Full Text Available The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.

Se han caracterizado numerosas muestras de los vidrios que forman el rosetón del transepto de la catedral de Tarragona mediante SEM/EDS, XRD, FTIR y microsonda electrónica. La aplicación de análisis estadístico multivariante permite establecer una clasificación de las muestras que refleja anteriores intervenciones de restauración. Además, se han estudiado los mecanismos y procesos de degradación, y se han determinado los productos de alteración. Ha quedado demostrada una clara ifluencia biológica en la alteración de estos vidrios, cuya actividad es parcialmente controlada por su composición química.
Characterisation of bacterial brown spot pathogen from dry bean ...

African Journals Online (AJOL)

Pseudomonas syringae pv. syringae (Pss) causes bacterial brown spot (BBS) of beans (Phaseolus vulgaris L.), with yield losses of up to 55% in South Africa. Pss has a wide host range and for many of these, the pathogen has been biochemically and genetically characterised. However, few studies have been conducted on ...
Spectroscopic characterisation of the stellar content of ultra diffuse galaxies

Science.gov (United States)

Ruiz-Lara, T.; Beasley, M. A.; Falcón-Barroso, J.; Román, J.; Pinna, F.; Brook, C.; Di Cintio, A.; Martín-Navarro, I.; Trujillo, I.; Vazdekis, A.

2018-05-01

Understanding the peculiar properties of Ultra Diffuse Galaxies (UDGs) via spectroscopic analysis is a challenging task requiring very deep observations and exquisite data reduction. In this work we perform one of the most complete characterisations of the stellar component of UDGs to date using deep optical spectroscopic data from OSIRIS at GTC. We measure radial and rotation velocities, star formation histories (SFH) and mean population parameters, such as ages and metallicities, for a sample of five UDG candidates in the Coma cluster. From the radial velocities, we confirm the Coma membership of these galaxies. We find that their rotation properties, if detected at all, are compatible with dwarf-like galaxies. The SFHs of the UDG are dominated by old (˜ 7 Gyr), metal-poor ([M/H] ˜ -1.1) and α-enhanced ([Mg/Fe] ˜ 0.4) populations followed by a smooth or episodic decline which halted ˜ 2 Gyr ago, possibly a sign of cluster-induced quenching. We find no obvious correlation between individual SFH shapes and any UDG morphological properties. The recovered stellar properties for UDGs are similar to those found for DDO 44, a local UDG analogue resolved into stars. We conclude that the UDGs in our sample are extended dwarfs whose properties are likely the outcome of both internal processes, such as bursty SFHs and/or high-spin haloes, as well as environmental effects within the Coma cluster.
High temperature corrosion during biomass firing: improved understanding by depth resolved characterisation of corrosion products

DEFF Research Database (Denmark)

Okoro, Sunday Chukwudi; Montgomery, Melanie; Jappe Frandsen, Flemming

2015-01-01

changes within the near surface region (covering both the deposit and the steel surface). Such cross-section analysis was further complemented by plan view investigations (additionally involving X-ray diffraction) combined with removal of the corrosion products. Improved insights into the nature......The high temperature corrosion of an austenitic stainless steel (TP 347H FG), widely utilised as a superheater tube material in Danish power stations, was investigated to verify the corrosion mechanisms related to biomass firing. KCl coated samples were exposed isothermally to 560 degrees C...... of the corrosion products as a function of distance from the deposit surface were revealed through this comprehensive characterisation. Corrosion attack during simulated straw-firing conditions was observed to occur through both active oxidation and sulphidation mechanisms....
Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation

Science.gov (United States)

Roy, Rajat K.; Dutta, Siuli; Panda, Ashis K.; Rajinikanth, V.; Das, Swapan K.; Mitra, Amitava; Strangwood, M.; Davis, Claire L.

2018-07-01

The recovery and recrystallisation behaviours of cold rolled IF steel have been investigated by destructive (optical microscopy and hardness) and non-destructive electromagnetic sensor, (which allows direct measurement of strip samples with no surface preparation) techniques. The onset and completion of recrystallisation are clearly monitored through destructive techniques of optical microscopy and hardness measurements. The nucleation of new recrystallised grains is observed in the sample annealed at 600 °C/15 min, while completion of recrystallisation takes place at 700 °C/15 min. The destructive techniques are not very accurate in monitoring recovery, for example, changes in hardness of accounting for ≈60% change in the coercivity value. Therefore, the measurement of magnetic softening through an electromagnetic sensor acts a crucial role for understanding recovery and recrystallisation behaviours of steels during industrial processing. The present investigation is aimed not only for controlling product quality but also saving characterisation time through off line monitoring during steel processing at industry.
Disc valve for sampling erosive process streams

Science.gov (United States)

Mrochek, J.E.; Dinsmore, S.R.; Chandler, E.W.

1986-01-07

A four-port disc valve is described for sampling erosive, high temperature process streams. A rotatable disc defining opposed first and second sampling cavities rotates between fired faceplates defining flow passageways positioned to be alternatively in axial alignment with the first and second cavities. Silicon carbide inserts and liners composed of [alpha] silicon carbide are provided in the faceplates and in the sampling cavities to limit erosion while providing lubricity for a smooth and precise operation when used under harsh process conditions. 1 fig.
Calibrated atomic force microscope measurements of vickers hardness indentations and tip production and characterisation for scanning tunelling microscope

DEFF Research Database (Denmark)

Jensen, Carsten P.

Calibrated atomic force microscope measurements of vickers hardness indentations and tip production and characterisation for scanning tunelling microscope......Calibrated atomic force microscope measurements of vickers hardness indentations and tip production and characterisation for scanning tunelling microscope...
Deficient motion-defined and texture-defined figure-ground segregation in amblyopic children.

Science.gov (United States)

Wang, Jane; Ho, Cindy S; Giaschi, Deborah E

2007-01-01

Motion-defined form deficits in the fellow eye and the amblyopic eye of children with amblyopia implicate possible direction-selective motion processing or static figure-ground segregation deficits. Deficient motion-defined form perception in the fellow eye of amblyopic children may not be fully accounted for by a general motion processing deficit. This study investigates the contribution of figure-ground segregation deficits to the motion-defined form perception deficits in amblyopia. Performances of 6 amblyopic children (5 anisometropic, 1 anisostrabismic) and 32 control children with normal vision were assessed on motion-defined form, texture-defined form, and global motion tasks. Performance on motion-defined and texture-defined form tasks was significantly worse in amblyopic children than in control children. Performance on global motion tasks was not significantly different between the 2 groups. Faulty figure-ground segregation mechanisms are likely responsible for the observed motion-defined form perception deficits in amblyopia.
SEM/TIMS analysis trials on hotswipe samples taken from a shielded cell at Harwell

International Nuclear Information System (INIS)

Tushingham, J.; Vatter, I.; Cooke, R.

1998-09-01

The IAEA require advanced techniques and procedures for the detection of traces of actinides to be applied to their environmental sampling programme for nuclear safeguards as a means to detect undeclared activities. 'Swipe' samples taken from within nuclear facilities by IAEA inspectors require analysis to determine their actinide content and composition by bulk and particle measurements. The use of analytical equipment capable of analysing individual particles, particularly of actinides, is essential to optimise the IAEA's aim to monitor Member State's nuclear activities more proficiently. A trial has been undertaken at the Harwell Laboratory of AEA Technology to establish the efficacy of scanning electron microscopy (SEM) and thermal ionisation mass spectrometry (TIMS) for the particle and bulk characterisation, respectively, of actinides on samples taken from within a shielded cell. These measurements were supported by γ-spectrometry and α-spectrometry. 'Hotswipe' samples taken from within a shielded cell with a well-known recent history have been prepared for particle and bulk analysis. SEM has been used to characterise individual particles from the swipe samples and the results have been related to known cell activities. Samples were prepared for SEM using a simple procedure to minimise the potential for sample contamination. The method proved to be capable of identifying 1 μm particles that contained U, Pu, Pa and Np. The measurement of U/Pu ratios was limited to particles that contained >2% Pu in U by weight. TIMS, together with alpha spectrometry, has been used to determine the bulk actinide composition of the samples whilst gamma spectrometry has been used to determine the fission product composition. Further work to improve the potential of SEM, and also secondary ionisation mass spectrometry (SIMS), for the measurement of hotswipe samples has been proposed. (author)
Characterisation of micro and nano SQUIDs at variable temperature and magnetic field

Energy Technology Data Exchange (ETDEWEB)

Koehn, Claudia; Storm, Jan-Hendrik; Bechstein, Sylke; Schurig, Thomas [Physikalisch-Technische Bundesanstalt, Abbestrasse 2-12, 10587 Berlin (Germany)

2015-07-01

SQUIDs are highly suited to investigate the magnetic properties of samples with small dimensions, such as nanoparticles, or to read out nanoelectromechanical systems (NEMS). Due to the small sample size, SQUIDs with dimensions in the μm or nm regime are desirable. These micro or nano SQUIDs should have a low noise and no hysteresis in the current-voltage-characteristic, even when operated in high magnetic fields of up to several 100 mT. To investigate such SQUID, we developed measurement setups which can simulate the measurement conditions of the intended SQUID application. The design and performance of two measurement setups will be shown and compared. One setup uses a dipstick that is immersed in liquid helium and can be evacuated to provide SQUID temperatures between 4.5 K and 10 K. The other one uses an evaporation cryostat so that the temperature can be varied from 2 K to 60 K. Both setups are equipped with coils to enable SQUID operation in variable magnetic field. To minimize noise, the output of the SQUID under test is preamplified by a SQUID series array which is operated at 4.2 K. First results of the characterisation of micro and nano SQUIDs will be presented.
A reflectivity profilometer for the optical characterisation of graded reflectivity mirrors in the 250 nm - 1100 nm spectral region

International Nuclear Information System (INIS)

Colucci, Alessandro; Nichelatti, Enrico

1998-04-01

It's developed the prototype of an instrument that can be used for the optical characterisation of graded reflectivity mirrors at any wavelength in the spectral region from 250 nm to 1100 nm. The instrument utilises a high-pressure Xe arc lamp as light source. Light is spectrally filtered by means of a grating monochromator. The sample is illuminated with an image of the monochromator exit slit. After reflection from the sample, this image is projected onto a 1024-elements charge-coupled device linear array driven by a digital frame board and interfaced with a personal computer. It's tested the instrument accuracy by comparing measurement results with the corresponding ones obtained by means of a laser scanning technique. Measurement Rms repeatability has been estimated to be approximately of 0.8% [it
Design and Characterisation of III-V Semiconductor Nanowire Lasers

Science.gov (United States)

Saxena, Dhruv

The development of small, power-efficient lasers underpins many of the technologies that we utilise today. Semiconductor nanowires are promising for miniaturising lasers to even smaller dimensions. III-V semiconductors, such as Gallium Arsenide (GaAs) and Indium Phosphide (InP), are the most widely used materials for optoelectronic devices and so the development of nanowire lasers based on these materials is expected to have technologically significant outcomes. This PhD dissertation presents a comprehensive study of the design of III-V semiconductor nanowire lasers, with bulk and quantum confined active regions. Based on the design, various III-V semiconductor nanowire lasers are demonstrated, namely, GaAs nanowire lasers, GaAs/AlGaAs multi-quantum well (MQW) nanowire lasers and InP nanowire lasers. These nanowire lasers are shown to operate at room temperature, have low thresholds, and lase from different transverse modes. The structural and optoelectronic quality of nanowire lasers are characterised via electron microscopy and photoluminescence spectroscopic techniques. Lasing is characterised in all these devices by optical pumping. The lasing characteristics are analysed by rate equation modelling and the lasing mode(s) in these devices is characterised by threshold gain modelling, polarisation measurements and Fourier plane imaging. Firstly, GaAs nanowire lasers that operate at room temperature are demonstrated. This is achieved by determining the optimal nanowire diameter to reduce threshold gain and by passivating nanowires to improve their quantum efficiency (QE). High-quality surface passivated GaAs nanowires of suitable diameters are grown. The growth procedure is tailored to improve both QE and structural uniformity of nanowires. Room-temperature lasing is demonstrated from individual nanowires and lasing is characterised to be from TM01 mode by threshold gain modelling. To lower threshold even further, nanowire lasers with GaAs/AlGaAs coaxial multi
Characterisation and genesis of the Singhbhum uranium province, India

International Nuclear Information System (INIS)

Mahadevan, T.M.

1988-01-01

The Singhbhum Uranium province is characterised by the late Archaean predominantly granitic Singhbhum Craton and the associated Proterozoic mobile belts, the boundaries of which are marked by major crustal dislocations. The Singhbhum craton had two-phase evolution during the time range 4000-2900 million years and its stabilisation around 2900 million years was marked by the emplacement of K-rich granitoids and the early crustal enrichment of uranium. Two distinctive types of uranium mineralisation occur in the Province - (i) the early Quartz Pebble Conglomerate (QPC) type and (ii) the later economically most significant shear-controlled hydrothermal type. The QPC type is confined to the cratonic volcano-sedimentary basins, characterised by basal fluvial high-energy deposits, near-continental volcanics and banded iron formations spanning the time band of 2900-2500 million years. The shear controlled hydrothermal mineralisation is predominantly developed in a 200 km-long arcuate zone of intense and deep tectonisation, acid-(?) alkaline-basic magmatism, hydrothermal activity and metallogenesis. This shear zone represents a belt of intense crust-mantle interaction. Uranium mineralisation is polyphasic, polymetallic. The mineralogy is complex and the chemistry of the ores is greatly influenced by the lithology of the host rocks involved in the shear. Part of the shear zone grazing the Dhanjori, predominantly volcanic supra-crustals is richer in U, Cu, Ni, Mo and also contains minor Bi, Au, Ag, Te and Se, while the western trans-Dhanjori sector of the shear zone characterised by schists and quartzites with lesser volcanic component is relatively poorer in these metals. The ore bodies in the trans-Dhanjori sector are more peneconcordant, gradational, stratabound and have spherical variograms, while those in the Dhanjori sector are transgressive, sharp, highly mobilised, vein type with Dewijsian variograms. A synthesis leads to the conclusion that uranium mineralisation is
Drought characterisation based on an agriculture-oriented standardised precipitation index

Science.gov (United States)

Tigkas, Dimitris; Vangelis, Harris; Tsakiris, George

2018-03-01

Drought is a major natural hazard with significant effects in the agricultural sector, especially in arid and semi-arid regions. The accurate and timely characterisation of agricultural drought is crucial for devising contingency plans, including the necessary mitigation measures. Many drought indices have been developed during the last decades for drought characterisation and analysis. One of the most widely used indices worldwide is the Standardised Precipitation Index (SPI). Although other comprehensive indices have been introduced over the years, SPI remains the most broadly accepted index due to a number of reasons, the most important of which are its simple structure and the fact that it uses only precipitation data. In this paper, a modified version of SPI is proposed, namely the Agricultural Standardised Precipitation Index (aSPI), based on the substitution of the total precipitation by the effective precipitation, which describes more accurately the amount of water that can be used productively by the plants. Further, the selection of the most suitable reference periods and time steps for agricultural drought identification using aSPI is discussed. This conceptual enhancement of SPI aims at improving the suitability of the index for agricultural drought characterisation, while retaining the advantages of the original index, including its dependence only on precipitation data. The evaluation of the performance of both SPI and aSPI in terms of correlating drought magnitude with crop yield response in four regions of Greece under Mediterranean conditions indicated that aSPI is more robust than the original index in identifying agricultural drought.

Credit in Acceptance Sampling on Attributes

NARCIS (Netherlands)

Klaassen, Chris A.J.

2000-01-01

Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a
A neutron source for IGISOL-JYFLTRAP: Design and characterisation

Energy Technology Data Exchange (ETDEWEB)

Mattera, A.; Pomp, S.; Lantz, M.; Rakopoulos, V.; Solders, A.; Al-Adili, A.; Passoth, E.; Prokofiev, A.V.; Andersson, P.; Hjalmarsson, A. [Uppsala University, BOX 516, Uppsala (Sweden); Bedogni, R.; Esposito, A.; Gentile, A. [INFN-LNF, Frascati (Italy); Bortot, D. [INFN-LNF, Frascati (Italy); Politecnico di Milano, Milano (Italy); Gomez-Ros, J.M. [INFN-LNF, Frascati (Italy); CIEMAT, Madrid (Spain); Introini, M.V.; Pola, A. [Politecnico di Milano, Milano (Italy); Gorelov, D.; Penttilae, H.; Moore, I.D.; Rinta-Antila, S.; Kolhinen, V.S.; Eronen, T. [University of Jyvaeskylae (Finland)

2017-08-15

A white neutron source based on the Be(p, nx) reaction for fission studies at the IGISOL-JYFLTRAP facility has been designed and tested. 30MeV protons impinge on a 5mm thick water-cooled beryllium disc. The source was designed to produce at least 10{sup 12} fast neutrons/s on a secondary fission target, in order to reach competitive production rates of fission products far from the valley of stability. The Monte Carlo codes MCNPX and FLUKA were used in the design phase to simulate the neutron energy spectra. Two experiments to characterise the neutron field were performed: the first was carried out at The Svedberg Laboratory in Uppsala (SE), using an Extended-Range Bonner Sphere Spectrometer and a liquid scintillator which used the time-of-flight (TOF) method to determine the energy of the neutrons; the second employed Thin-Film Breakdown Counters for the measurement of the TOF, and activation foils, at the IGISOL facility in Jyvaeskylae (FI). Design considerations and the results of the two characterisation measurements are presented, providing benchmarks for the simulations. (orig.)
Characterising boiler ash from a circulating fluidised bed municipal solid waste incinerator and distribution of PCDD/F and PCB.

Science.gov (United States)

Zhang, Mengmei; Buekens, Alfons; Li, Xiaodong

2018-05-31

In this study, ash samples were collected from five locations situated in the boiler of a circulating fluidised bed municipal solid waste incinerator (high- and low-temperature superheater, evaporator tubes and upper and lower economiser). These samples represent a huge range of flue gas temperatures and were characterised for their particle size distribution, surface characteristics, elemental composition, chemical forms of carbon and chlorine and distribution of polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and biphenyls (PCB). Enrichment of chlorine, one of the main elements of organochlorinated pollutants, and copper, zinc and lead, major catalytic metals for dioxin-like compounds, was observed in lower-temperature ash deposits. The speciation of carbon and chlorine on ash surfaces was established, showing a positive correlation between organic chlorine and oxygen-containing carbon functional groups. The load of PCDD/F and PCB (especially dioxin-like PCB) tends to rise rapidly with falling temperature of flue gas, reaching their highest value in economiser ashes. The formation of PCDD/F congeners through the chlorophenol precursor route apparently was enhanced downstream the boiler. Principal component analysis (PCA) was applied to study the links between the ash characteristics and distribution of chloro-aromatics. The primary purpose of this study is improving the understanding of any links between the characteristics of ash from waste heat systems and its potential to form PCDD/F and PCB. The question is raised whether further characterisation of fly ash may assist to establish a diagnosis of poor plant operation, inclusive the generation, destruction and eventual emission of persistent organic pollutants (POPs).
Health Behaviour Change Through Computer Games: Characterising Interventions.

Science.gov (United States)

Poultney, Nathan; Maeder, Anthony; Ginige, Jeewani Anupama

2016-01-01

Recently games in the form of video, computer, or mobile apps have been utilised as an effective component of interventions for health behaviour change. This paper provides an overview of related projects reported in peer-review literature in the period 2006 to 2016. Nine highly relevant references were considered for analysis. The findings are presented according to 3 dimensions of characterisation: health intention, behaviour change principle, and health purpose.
"Dermatitis" defined.

Science.gov (United States)

Smith, Suzanne M; Nedorost, Susan T

2010-01-01

The term "dermatitis" can be defined narrowly or broadly, clinically or histologically. A common and costly condition, dermatitis is underresourced compared to other chronic skin conditions. The lack of a collectively understood definition of dermatitis and its subcategories could be the primary barrier. To investigate how dermatologists define the term "dermatitis" and determine if a consensus on the definition of this term and other related terms exists. A seven-question survey of dermatologists nationwide was conducted. Of respondents (n = 122), half consider dermatitis to be any inflammation of the skin. Nearly half (47.5%) use the term interchangeably with "eczema." Virtually all (> 96%) endorse the subcategory "atopic" under the terms "dermatitis" and "eczema," but the subcategories "contact," "drug hypersensitivity," and "occupational" are more highly endorsed under the term "dermatitis" than under the term "eczema." Over half (55.7%) personally consider "dermatitis" to have a broad meaning, and even more (62.3%) believe that dermatologists as a whole define the term broadly. There is a lack of consensus among experts in defining dermatitis, eczema, and their related subcategories.
Characterisation of phosphate rocks at kurun mountain, Sudan

International Nuclear Information System (INIS)

Abdelgader, G. A. M.

2014-08-01

This main objective of this study was to characterise some Sudanese phosphate raw materials collected from Jebel Kurun, located in the eastern part of Nuba Mountain, Western Sudan. The study also aimed to investigate the association between uranium and phosphate and to determine the concentration of some essential elements and trace elements in the phosphate rock. A total of 30 samples were collected from Karun's eastran mountains, near Abujibiha City and have been analyzed for the selected elements using x-ray fluorescence. The obtained results showed that the average concentration of elements was Ca (11.3) and Fe (1.7) as a percentage, while it was Cu (1617.7), Ni (258.4), Pb (185.9), Ti (27.62), V (3779.9), U (160.9), Zn (152.8) and Mn (776.3) in ppm. The average total phosphorus content (analyzed as P O5 %) using UV-visible spectrometer was found to be 30.54%. This could be considered is acceptable percentage for phosphate to be 30.54%. This could be considered is acceptable percentage for phosphate to be used in industrial fertilizers and phosphoric acid production. The average total calcium carbonate was 15.7%. For the elements distribution, uranium found to be more concentrated in the summit of Jebel Kurun, and it displayed a correlation with lead. Furthermore, four groups of association have been noticed, based on elements concentrations.(Author)
Sampling of contaminants from product gases of biomass gasifiers

Energy Technology Data Exchange (ETDEWEB)

Staahlberg, P.; Lappi, M.; Kurkela, E.; Simell, P.; Oesch, P.; Nieminen, M. [VTT Energy, Espoo (Finland). New Energy Technologies

1998-12-01

Reliable sampling and analysis of products from biomass gasification are essential for the successful process development and economical operation of commercial gasifiers. One of the most important and most difficult analytical tasks is to characterise the emissions from the gasifiers. This report presents a review of the sampling and analytical systems employed and developed when doing research on coal and biomass gasification. In addition to the sampling systems published in the literature, experiences obtained in various biomass gasification R and D projects of VTT in 1985-1995 are described. The present sampling methods used for different gas contaminants at VTT are also briefly presented. This report focuses mainly on the measurement of tars, nitrogen compounds and sulphur gases. Isokinetic and non-isokinetic sampling train systems are described and, in addition, special sampling apparatus based on liquid-quenched probe and gas dilution is briefly outlined. Sampling of tars with impinger systems and sampling of heavy tars with filter techniques are described in detail. Separate sampling of particulates is briefly discussed. From inorganic compounds the sampling systems used for H{sub 2}S and other sulphur gases, NH{sub 3} and HCN and HCl are presented. Proper storage of the samples is also included in the report. (orig.) 90 refs.
Complementary techniques for solid oxide electrolysis cell characterisation at the micro- and nano-scale

DEFF Research Database (Denmark)

Wiedenmann, D.; Hauch, Anne; Grobety, B.

2010-01-01

), material degradation and evaporation can occur, e.g., from the cell-sealing material, leading to poisoning effects and aging mechanisms that decrease the cell efficiency and long-term durability. To investigate such cell degradation processes, thorough examination of SOCs often requires a chemical...... approach for the structural and chemical characterisation of changes in aged cathode-supported electrolysis cells produced at Risø DTU, Denmark. Additionally, we present results from the characterisation of impurities at the electrolyte/hydrogen interface caused by evaporation of sealing material....
Contribution to the microwave characterisation of superconductive materials by means of sapphire resonators

International Nuclear Information System (INIS)

Hanus, Xavier

1993-01-01

The objective of this research thesis is to find a compact resonant structure which would allow the residual surface impedance of superconductive samples to be simply, quickly and economically characterised. The author first explains why he decided to use a sapphire single-crystal as inner dielectric, given some performance reached by resonant structures equipped with such inner dielectrics, and given constraints adopted from the start. He explains the origin of microwave losses which appear in this type of resonant structure, i.e. respectively the surface impedance as far as metallic losses are concerned, and the sapphire dielectric loss angle for as far as dielectric losses are concerned. The experimental installation and the principle of microwave measurements are described. The performance of different possible solutions of resonant structures from starting criteria is presented. The solution of the cavity-sapphire with a TE 011 resonant mode is derived [fr
Valorisation of chicken feathers: Characterisation of chemical properties.

Science.gov (United States)

Tesfaye, Tamrat; Sithole, Bruce; Ramjugernath, Deresh; Chunilall, Viren

2017-10-01

The characterisation of the chemical properties of the whole chicken feather and its fractions (barb and rachis), was undertaken to identify opportunities for valorizing this waste product. The authors have described the physical, morphological, mechanical, electrical and thermal properties of the chicken feathers and related them to potential valorisation routes of the waste. However, identification of their chemical properties is necessary to complete a comprehensive description of chicken feather fractions. Hence, the chicken feathers were thoroughly characterised by proximate and ultimate analyses, elemental composition, spectroscopic analyses, durability in different solvents, burning test, and hydrophobicity. The proximate analysis of chicken feathers revealed the following compositions: crude lipid (0.83%), crude fibre (2.15%), crude protein (82.36%), ash (1.49%), NFE (1.02%) and moisture content (12.33%) whereas the ultimate analyses showed: carbon (64.47%), nitrogen (10.41%), oxygen (22.34%), and sulphur (2.64%). FTIR analysis revealed that the chicken feather fractions contain amide and carboxylic groups indicative of proteinious functional groups; XRD showed a crystallinity index of 22. Durability and burning tests confirmed that feathers behaved similarly to animal fibre. This reveals that chicken feather can be a valuable raw material in textile, plastic, cosmetics, pharmaceuticals, biomedical and bioenergy industries. Copyright © 2017 Elsevier Ltd. All rights reserved.
Some antarctic soil cores from Wood Bay characterised by Moessbauer spectroscopy

International Nuclear Information System (INIS)

Bertelle, M.; Leotta, G.; Calogero, S.; Constantinescu, S.; Oddone, M.

1999-01-01

Marine, lacustrine and terrestrial soil cores, sampled in a restricted area of Wood Bay in Antarctica, were characterised by 57 Fe Moessbauer spectroscopy. The results of X-ray diffraction and instrumental neutron activation analysis are shortly discussed too. The soils, formed by mechanical disaggregation and weathering of rocks of volcanic origin from Mt. Melbourne, consist of alkaline feldspars, olivines, augitic clinopyroxenes, and iron oxides such as haematite, goethite, and magnetite. Lacustrine and terrestrial soils are richer in clinopyroxenes whereas marine soils are richer in olivines. This finding shows that the soils retain a content in olivines and clinopyroxenes comparable to that found in the parent lava outcropped from Mt. Melbourne volcano. The soils appear at the initial stage of weathering. Two main weathering effects are observed: 1. atmospheric oxygen determines the oxidation of the iron(II) present in olivines and clinopyroxenes and the neo-formed iron(III) is mainly retained in silicate sites as structural iron(III); 2. a part of magnetite, present as a primary constituent of the volcanic rocks, is oxidised to bulk haematite and goethite. (authors)
Programme for repository host rock characterisation in the ONKALO (ReRoC)

International Nuclear Information System (INIS)

Aalto, P.; Aaltonen, I.; Kemppainen, K.

2009-04-01

The excavation of the ONKALO is now entering the deep bedrock regime, where the ambient rock conditions are representative of those to be found in the vicinity of future deposition tunnels and deposition holes. It is proposed to study the properties of the rock under these conditions using specially-excavated rock rooms, investigation niches or stations and characterisation holes. This report provides an overview of these plans, which are designed to obtain the relevant site-specific knowledge. This report summarises the outstanding issues of the site modelling that are driving the deep rock investigations. It also lists the main long-term safety needs from the site characterisation and presents a short description of the data needs raised by the RSC (Rock Suitability Criteria) programme. The report presents the general characterisation programme of the ONKALO access tunnel. It includes geological mapping in the tunnel and the shafts and investigations in pilot, probe and characterisation hole. It also presents a programme for the pre-grouting hole studies in the shafts. The main aim of the report is to present the experimental studies that are to be carried out in the niches and studies that will be carried out below hydrogeological zone HZ20 at different locations in the tunnel, in order to obtain information on rock properties that are comparable to the rock at the disposal depth. This document provides a detailed discussion of the following experiments: (1) the sulphate reduction experiment at a depth of between 300-350 m to investigate the production, presence and effects of sulphide in the groundwater; (2) the hydrogeological interference experiment at tunnel chainage 3620 or 3748 for a detailed characterisation of connected fracture networks in the rock mass, representative of those in the near field of the deposition holes; (3) the rock matrix diffusion experiment(s) below chainage 4000 to determine the bedrock's essential retention properties for
Detecting and characterising ramp events in wind power time series

International Nuclear Information System (INIS)

Gallego, Cristóbal; Cuerva, Álvaro; Costa, Alexandre

2014-01-01

In order to implement accurate models for wind power ramp forecasting, ramps need to be previously characterised. This issue has been typically addressed by performing binary ramp/non-ramp classifications based on ad-hoc assessed thresholds. However, recent works question this approach. This paper presents the ramp function, an innovative wavelet- based tool which detects and characterises ramp events in wind power time series. The underlying idea is to assess a continuous index related to the ramp intensity at each time step, which is obtained by considering large power output gradients evaluated under different time scales (up to typical ramp durations). The ramp function overcomes some of the drawbacks shown by the aforementioned binary classification and permits forecasters to easily reveal specific features of the ramp behaviour observed at a wind farm. As an example, the daily profile of the ramp-up and ramp-down intensities are obtained for the case of a wind farm located in Spain
Sampling And Identifying Of Mould In The Library Building

Directory of Open Access Journals (Sweden)

Abdul Wahab Suriani Ngah

2016-01-01

Full Text Available Despite the growing concern over mould and fungi infestations on library building, little has been reported in the literature on the development of an objective tool and criteria for measuring and characterising the mould and fungi. In this paper, an objective based approach to mould and fungi growth assessment using various sampling techniques and its identification using microscopic observation are proposed. This study involved three library buildings of Higher Institution Educational in Malaysia for data collection purpose and study of mould growth. The mould sampling of three libraries was collected using Coriolis air sampler, settling plate air sampling using Malt Extract Agar (MEA, IAQ MOLD Alexeter IAQ-Pro Asp/Pen® Test and swab sampling techniques. The IAQ MOLD Alexeter IAQ-Pro Asp/Pen® Test and traditional method technique identified various mould species immediately on the site, and the microscopic observation identifies common types of the mould such as Aspergillus, Penicillium and Stachybotrys’s. The sample size and particular characteristics of each library will result in the mould growth pattern and finding.
Molecular identification of black-pigmented bacteria from subgingival samples of cats suffering from periodontal disease.

Science.gov (United States)

Pérez-Salcedo, L; Laguna, E; Sánchez, M C; Marín, M J; O'Connor, A; González, I; Sanz, M; Herrera, D

2015-04-01

To characterise the black-pigmented bacterial species found in the subgingival samples of cats with periodontal disease using molecular-based microbiological techniques. Sixty-five subgingival samples obtained from 50 cats with periodontal disease were analysed by polymerase chain reaction amplified ribosomal DNA restriction analysis and cloning and sequencing of the 16S rRNA genes. Among the 65 subgingival samples, eight phylogenetic profiles were obtained, of which the most prevalent species were: Porphyromonas gulae (40%), P. gingivalis/P. gulae (36 · 9%), P. gulae/Porphyromonas sp. UQD 406 (9 · 2%), Odoribacter denticanis (6 · 2%), P. gulae/Porphyromonas sp. UQD 348 (1 · 5%) and P. circumdentaria (1 · 5%). When compared with the species resulting from biochemical diagnosis, the identification of P. gulae was congruent in 70% of the cases, while colonies identified as P. intermedia-like corresponded in 80% of cases to P. gulae. The use of molecular-based microbiological diagnostic techniques resulted in a predominance of Porphyromonas spp. in the subgingival plaque of cats suffering from periodontal disease. Further characterisation of these bacteria identified P. gulae, O. denticanis and P. circumdentaria. The more frequently detected phylogenetic profiles corresponded to P. gingivalis and P. gulae. © 2015 British Small Animal Veterinary Association.
Characterisation of the Ionian-Lucanian coastal plain aquifer

OpenAIRE

Polemio, M.; Limoni, P.P.; Mitolo, D.; Santaloia, F.

2002-01-01

This paper deals with a Southern Italy area, 40 km by 10 km wide, located where four river valleys anastomose themselves in the coastal plain. The geological and hydrogeological features of the study area and the chemical-physical groundwater characterisation have been inferred from the data analysis of 1130 boreholes. Some aquifers, connected among them, constituted by soils of different geological origin -marine terraces deposits, river valley alluvial deposits and alluvial and coastal depo...
Syntactic definitions of undefined: On defining the undefined

NARCIS (Netherlands)

Z.M. Ariola (Zena); J.R. Kennaway (Richard); J.W. Klop (Jan Willem); M.R. Sleep (Ronan); F.-J. de Vries (Fer-Jan)

1994-01-01

textabstractIn the lambda-calculus, there is a standard notion of what terms should be considered to be “undefined”: the unsolvable terms. There are various equivalent characterisations of this property of terms. We attempt to find a similar notion for orthogonal term rewrite systems. We find that
The origin of groundwater salinity in granitic rocks: identification and characterisation of chloride sources

International Nuclear Information System (INIS)

Savoye, Sebastien

1998-01-01

This research thesis aims at clearly identifying the possible origins of chlorine in solution in underground waters in a granitic environment, and is thus a first step in the prediction of concentration of dissolved compounds in waters in crystalline environment, with respect to the geological context. In a first part, the author proposes a synthetic and critical overview of knowledge and previous studies: definition of the term 'salinity', presentation of geochemical tracers, presentation of available data on potential chlorine sources in granitic rocks. The author then describes the experimental protocols and studied sites, reports results of the characterisation of different chlorine tanks performed on samples from each studied site. Based on mass assessment calculations and on the use of tracers, the author finally discusses the contribution of each of the chlorine tanks to the salinity of underground waters [fr
Characterisation of TRISO fuel particles

International Nuclear Information System (INIS)

Lopez H, E.; Yang, D.

2012-10-01

The TRISO (tri structural isotropic) coated fuel particle is a key component contributing to the inherent safety of the High Temperature Reactor. A uranium kernel is coated with three layers of pyrolytic carbon and one of silicon carbide. The purpose of these coatings is to work as a miniature fission product containment vessel capable of enclosing all important radio nuclei under normal and off-normal reactor operating conditions. Due to the importance of these coatings, is of great interest to establish characterisation techniques capable of providing a detailed description of their microstructure and physical properties. Here we describe the use of Raman spectroscopy and two modulator generalised ellipsometry to study the anisotropy and thermal conductivity of pyrolytic carbon coatings, as well as the stoichiometry of the silicon carbide coatings and fibres. (Author)
Characterisation of social impacts in LCA. Part 2: implementation in six company case studies

DEFF Research Database (Denmark)

Dreyer, Louise Camilla; Hauschild, Michael Zwicky; Schierbeck, Jens

2010-01-01

, Restrictions of freedom of association and collective bargaining, and Child labour (Dreyer et al, 2009a). These impact categories are considered by the authors to be among the obligatory impact categories in a Social LCA. The characterisation models combine information about the way a company manages its...... or industrial branch or sector) of the company. The resulting indicator score represents the risk that violations take place of the labour right represented by the impact category. Results The social impact characterisation is performed for each of the six case studies using the methodology earlier developed...

Geological exploration strategies and site characterisation methodologies

International Nuclear Information System (INIS)

Sprecher, C.

1997-01-01

Starting with a short overview of the Swiss HLW disposal programme the paper addresses the more general issue of how site characterisation programmes can better be matched to the acknowledged data requirements of safety analysts and repository designers. Swiss experience suggests that measures to promote mutual understanding between geologistsand quantitative modelers and advance planning of the GEO-data-synthesis can help to bridge the gap separating performance assessment input parameters and field measurements. This represents a step towards more effective and cost efficient field investigations. (author). 4 figs
Microscopic characterisation of TIG-deposition and -welding

International Nuclear Information System (INIS)

Groot, P.

1992-11-01

In the framework of the European Fusion Technology Programme austenitic RVS AISI 316LN is considered as candidate material for the First Wall. In this report, among others, tungsten-arc (TIG) welding connections are investigated as a part of the ECN project 1.653. It concerns respectively; the deposition of TIG-electrode-material and the welding connection. The connections are fabricated by the Danish Welding Institute Svejsecentrals in Broendby. This study is supposed to give a welding qualification by microscopic characterisation of a TIG-deposition and a TIG-weld. 3 refs., 33 figs., 5 tabs
Geological exploration strategies and site characterisation methodologies

Energy Technology Data Exchange (ETDEWEB)

Sprecher, C. [National Cooperative for the Disposal of Radioactive Waste, Wettingen (Switzerland)

1997-12-31

Starting with a short overview of the Swiss HLW disposal programme the paper addresses the more general issue of how site characterisation programmes can better be matched to the acknowledged data requirements of safety analysts and repository designers. Swiss experience suggests that measures to promote mutual understanding between geologistsand quantitative modelers and advance planning of the GEO-data-synthesis can help to bridge the gap separating performance assessment input parameters and field measurements. This represents a step towards more effective and cost efficient field investigations. (author). 4 figs.
Characterising organic matter in recirculating aquaculture systems with fluorescence EEM spectroscopy

DEFF Research Database (Denmark)

Hambly, Adam; Arvin, Erik; Pedersen, Lars-Flemming

2015-01-01

The potential of recirculating aquaculture systems (RAS) in the aquaculture industry is increasingly being acknowledged. Along with intensified application, the need to better characterise and understand the accumulated dissolved organic matter (DOM) within these systems increases. Mature RASs...
Biological characterisation of Haliclona (?gellius) sp.: sponge and associated microorganisms.

NARCIS (Netherlands)

Sipkema, D.; Holmes, B.; Nichols, S.A.; Blanch, H.W.

2009-01-01

We have characterised the northern Pacific undescribed sponge Haliclona (?gellius) sp. based on rDNA of the sponge and its associated microorganisms. The sponge is closely related to Amphimedon queenslandica from the Great Barrier Reef as the near-complete 18S rDNA sequences of both sponges were
Physical characterisation of particles and rheological of a heterogeneous system used in low-pressure injection moulding; Caracterizacao fisica de particulas e reologica de um sistema heterogeneo utilizado em moldagem de pos por injecao a baixa pressao

Energy Technology Data Exchange (ETDEWEB)

Zampieron, Joao Vicente

2002-07-01

The powder injection moulding process is a recent technology, which offers as advantages a high production of complex geometry metal parts, with low cost, where secondary operations of machinery are unnecessary. The main of this thesis was centered on a coarse powders feedstock injection. The process begins with the composition of the mass, that is the combination of metal powders with organic binders. The following steps succeed injection in moulds, debinding, sintering and, if necessary, cleaning. For the formulation of the feedstock it is indispensable the characterisation of the powders. This is little mentioned in the open literature and brings up controversy among authors. At first, a series of powders characterisations of AISI 316 L stainless steel (below 25 {mu}m) was adopted. The next step was to characterise the rheological behaviour of the feedstock using different rheological apparatus, so as to find the most appropriate equipment to the low-pressure powder injection molding process. The mass has to present a favourable rheological behaviour, which is low viscosity. The results of the physical characterisation were correlated among themselves and with the rheological characterisation. This was undertaken with the purpose of finding agreement among their values. Finally, the possibility of injection of water and gas atomised stainless steel coarse powders feedstock was studied. This presents as main advantage, the reduction of costs for the process. According to the literature, only powders with size below 25 {mu}m are possible to be injected. Hence, starting from the physical characterisation of particles and rheological characterisation of the feedstock, the formulation of an appropriate mass was found for the coarse powders. These coarse powders were characterised by particles below 45 {mu}m. In this case it was necessary to alter drastically the feedstock composition, using high amounts of wax, which lead to unstable rheological conditions. But, it
Development of a perfusion reversed-phase high performance liquid chromatography method for the characterisation of maize products using multivariate analysis.

Science.gov (United States)

Rodriguez-Nogales, J M; Garcia, M C; Marina, M L

2006-02-03

A perfusion reversed-phase high performance liquid chromatography (RP-HPLC) method has been designed to allow rapid (3.4 min) separations of maize proteins with high resolution. Several factors, such as extraction conditions, temperature, detection wavelength and type and concentration of ion-pairing agent were optimised. A fine optimisation of the gradient elution was also performed by applying experimental design. Commercial maize products for human consumption (flours, precocked flours, fried snacks and extruded snacks) were characterised for the first time by perfusion RP-HPLC and their chromatographic profiles allowed a differentiation among products relating the different technological process used for their preparation. Furthermore, applying discriminant analysis makes it possible to group the samples according with the technological process suffered by maize products, obtaining a good prediction in 92% of the samples.
Characterisation of a novel enterobacteria phage, CAjan, isolated from rat faeces.

Science.gov (United States)

Carstens, Alexander B; Kot, Witold; Lametsch, Rene; Neve, Horst; Hansen, Lars H

2016-08-01

In this study, we describe the isolation and characterisation of the novel enterobacteria phage CAjan. This phage belongs to the order Caudovirales and the family Siphoviridae. The phage possesses a linear, double-stranded DNA genome consisting of 59,670 bp with a G+C content of 44.7 % and 91 predicted open reading frames (ORFs). Putative functions were assigned to 39 of the ORFs (37.4 %). The phage structural genes were furthermore functionally characterised by LC MS/MS. CAjan, together with Escherichia phage Seurat and Escherichia phage slur01, represent a novel and genetically distinct clade of Siphoviridae phages that could be considered to constitute a new phage genus. Despite limited sequence similarity, the phages in this group share a number of other common features, including genome structure and the presence of queuosine biosynthesis genes.
Geostatistical characterisation of geothermal parameters for a thermal aquifer storage site in Germany

Science.gov (United States)

Rodrigo-Ilarri, J.; Li, T.; Grathwohl, P.; Blum, P.; Bayer, P.

2009-04-01

The design of geothermal systems such as aquifer thermal energy storage systems (ATES) must account for a comprehensive characterisation of all relevant parameters considered for the numerical design model. Hydraulic and thermal conductivities are the most relevant parameters and its distribution determines not only the technical design but also the economic viability of such systems. Hence, the knowledge of the spatial distribution of these parameters is essential for a successful design and operation of such systems. This work shows the first results obtained when applying geostatistical techniques to the characterisation of the Esseling Site in Germany. In this site a long-term thermal tracer test (> 1 year) was performed. On this open system the spatial temperature distribution inside the aquifer was observed over time in order to obtain as much information as possible that yield to a detailed characterisation both of the hydraulic and thermal relevant parameters. This poster shows the preliminary results obtained for the Esseling Site. It has been observed that the common homogeneous approach is not sufficient to explain the observations obtained from the TRT and that parameter heterogeneity must be taken into account.
Precautionary measures to prevent damage, as defined in the Atomic Energy Law

International Nuclear Information System (INIS)

Marburger, P.

1983-01-01

The requirement to take every 'precaution which is necessary in the light of existing scientific knowledge and technology to prevent damage' (section 7, sub-section (2), no. 3 Atomic Energy Act) is not restricted to conventional (preventive) measures but is to be understood as a duty to actively provide for appropriate protection from conceivable damage. Below the level of legally binding laws and regulations, there is the level of scientific-technical codes and standards, which are of great significance to the licensing procedure under atomic energy law. As these codes and standards do not form part of the law but nevertheless represent the essence of scientific knowledge needed to fulfill the duty defined by the law, they are gaining full impact only through the licensing procedure, thus being transformed into concrete legal requirements. Hence one can say that the legal situation in atomic energy law relating to the licensing requirements as laid down in section 7, sub-section (2), no. 3 is presently characterised by a regulatory deficit. This regulatory deficit cannot be overcome by the means and tools offered by the current law. One possibility to fill the gap is to give a legally binding status to the safety guides defined by the deterministic safety concept, by listing the conceivable accidents to be mastered. This recommendable procedure could lead to an ordinance on the safety of nuclear installations. Such an ordinance could be kept abreast with technical progress and scientific knowledge by creating a referring legal instrument, pointing to, e.g., the KTA Safety Guide. (orig./HSCH) [de
Characterisation and prevention of exacerbations in frequently exacerbating patienst with COPD

NARCIS (Netherlands)

S. Uzun (Sevim)

2014-01-01

markdownabstract__Abstract__ Chronic obstructive pulmonary disease (COPD) is a disease which is characterised by airway inflammation and progressive airflow limitation with poor reversibility. Periods of acute deterioration lie in the natural course of the disease and are called exacerbations.
Mineralogical, geochemical and radiological characterisation of Selmo Formation in Batman area, Turkey.

Science.gov (United States)

Isik, Umit; Damla, Nevzat; Akkoca, Dicle Bal; Cevik, Uğur

2012-06-01

This work deals with the mineralogical, geochemical and radiological characterisations of Selmo Formation in Batman neighbourhood. The upper Miocene-Pliocene Selmo Formation is common in the centre of Batman and composed of carbonated sandy claystones and silty-sandy stone lenses. The common whole minerals of the samples are quartz, feldspars, calcite and dolomite. The clay minerals are smectite, illite, chlorite and mixed-layer clay (chlorite-smectite). The geochemical mean values of the samples are 51.7% SiO(2); 12.6% Al(2)O(3); 6.2% Fe(2)O(3); 3.6% MgO; 6.3% CaO; 1.1% Na(2)O; 1.7% K(2)O; 0.8% TiO(2); 0.2% P(2)O(5); 0.1% MnO; and 0.03% Cr(2)O(3). In addition, baseline maps for the concentrations of each radionuclide, the radium equivalent activity and the outdoor gamma dose rate distributions have been plotted for the study area. The mean activity concentrations of (226)Ra, (232)Th, (40)K and (137)Cs were determined to be 32, 24, 210 and 9 Bq kg(-1), respectively. The assessments of the radiological hazard indices, such as radium equivalent activity, absorbed dose rate in air, annual effective dose equivalent, excess lifetime cancer risk, external hazard index and internal hazard index, were calculated and compared with the internationally accepted reference values. This study shows that the concentrations of radioactivities in the measured samples were within the recommended safety limits and did not pose to be any significant source of radiation hazard.
Further characterisation of two Eimeria species (Eimeria quokka and Eimeria setonicis) in quokkas (Setonix brachyurus).

Science.gov (United States)

Austen, J M; Friend, J A; Yang, R; Ryan, U M

2014-03-01

The identification and characterisation of novel Eimeria species has largely been based on sporulated oocyst and sporocyst morphology, the host species and the geographical range. Variation in the size and shape of Eimeria oocysts across their host range however, make the identification and characterisation of novel species using traditional methodologies alone problematic. The use of molecular markers and phylogenetic analysis has greatly advanced our ability to characterise Eimeria species and has recently been applied to understand evolutionary relationships among Eimeria species from Australian marsupials. In the present study, Eimeria species isolated from quokkas (Setonix brachyurus) captured from Two Peoples Bay, Bald Island and Rottnest Island, Western Australia, were morphologically identified as Eimeria quokka and Eimeria setonicis. Both Eimeria species were identified as being polymorphic in nature with regards to sporulated oocyst and sporocyst morphometrics. Phylogenetic analysis using 18S rRNA and COI (cytochrome c oxidase subunit 1) genes, grouped E. quokka and E. setonicis within the Eimeria marsupial clade together with Eimeria trichosuri from brushtail possums, Eimeria macropodis from tammar wallabies (Macropus eugenii) and several unidentified macropod Eimeria species from western grey kangaroos (Macropus fuliginosus). This study is the first to characterise E. quokka and E. setonicis by molecular analysis, enabling more extensive resolution of evolutionary relationships among marsupial-derived Eimeria species. Copyright © 2014 Elsevier Inc. All rights reserved.
105-N Basin sediment disposition phase-one sampling and analysis plan

International Nuclear Information System (INIS)

1997-01-01

The sampling and analysis plan (SAP) for Phase 1 of the 105-N Basin sediment disposition project defines the sampling and analytical activities that will be performed for the engineering assessment phase (phase 1) of the project. A separate SAP defines the sampling and analytical activities that will be performed for the characterization phase (Phase 2) of the 105-N sediment disposition project. The Phase-1 SAP is presented in the introduction (Section 1.0), in the field sampling plan (FSP) (Section 2.0), and in the quality assurance project plan (QAPjP) (Section 3.0). The FSP defines the sampling and analytical methodologies to be performed. The QAPjP provides information on the quality assurance/quality control (QA/QC) parameters related to the sampling and analytical methodologies. This SAP defines the strategy and the methods that will be used to sample and analyze the sediment on the floor of the 105-N Basin. The resulting data will be used to develop and evaluate engineering designs for collecting and removing sediment from the basin
Vision based monitoring and characterisation of combustion flames

International Nuclear Information System (INIS)

Lu, G; Gilabert, G; Yan, Y

2005-01-01

With the advent of digital imaging and image processing techniques vision based monitoring and characterisation of combustion flames have developed rapidly in recent years. This paper presents a short review of the latest developments in this area. The techniques covered in this review are classified into two main categories: two-dimensional (2D) and 3D imaging techniques. Experimental results obtained on both laboratory- and industrial-scale combustion rigs are presented. Future developments in this area also included
Comprehensive characterisation of atmospheric aerosols in Budapest, Hungary: physicochemical properties of inorganic species

Science.gov (United States)

Salma, Imre; Maenhaut, Willy; Zemplén-Papp, Éva; Záray, Gyula

As part of an air pollution project in Budapest, aerosol samples were collected by stacked filter units and cascade impactors at an urban background site, two downtown sites, and within a road tunnel in field campaigns conducted in 1996, 1998 and 1999. Some criteria pollutants were also measured at one of the downtown sites. The aerosol samples were analysed by one or more of the following methods: instrumental neutron activation analysis, particle-induced X-ray emission analysis, a light reflection technique, gravimetry, thermal profiling carbon analysis and capillary electrophoresis. The quantities measured or derived include atmospheric concentrations of elements (from Na to U), of particulate matter, of black and elemental carbon, and total carbonaceous fraction, of some ionic species (e.g., nitrate and sulphate) in the fine ( EAD) or in both coarse (10- 2 μm EAD) and fine size fractions, atmospheric concentrations of NO, NO 2, SO 2, CO and total suspended particulate matter, and meteorological parameters. The analytical results were used for characterisation of the concentration levels, elemental composition, time trends, enrichment of and relationships among the aerosol species in coarse and fine size fractions, for studying their fine-to-coarse concentration ratios, spatial and temporal variability, for determining detailed elemental mass size distributions, and for examining the extent of chemical mass closure.
SPME-GC-MS analysis of commercial henna samples (Lawsonia inermis L.).

Science.gov (United States)

Mengoni, Tamara; Peregrina, Dolores Vargas; Censi, Roberta; Cortese, Manuela; Ricciutelli, Massimo; Maggi, Filippo; Di Martino, Piera

2016-01-01

The aim of this work was to provide a characterisation of volatile constituents from different commercial batches of henna (Lawsonia inermis) leaves of different geographic origin. Headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography-mass spectrometry (GC-MS) was used for the purpose. A total of 72 components were identified by GC-MS in the headspace of different henna samples which proved to differ considerably from each other, because they were characterised by different classes of components, mainly aliphatic compounds (9.0-64.7%), terpenoids (5.8-45.5%) and aromatics (7.9-45.2%), with alkanes (0.9-18.5%), aldehydes (2.1-18.8%) and carboxylic acids (3.1-29.3%), monoterpenes (3.4-30.0%) and sesquiterpenes (0.8-23.7%) and phenyl propanoids (0.6-43.1%), being the most abundant, respectively. Major representatives of these groups were n-hexadecane (0.5-4.7%), (2E)-hexenal (0.5-11.7%) and acetic acid (2.8-24.5%), limonene (0.8-14.7%), carvol (3.8-7.1%), geranyl acetone (1.4-7.9%) and (E)-caryophyllene (3.3-8.4%), and (E)-anethole (0.6-35.0%), respectively. We assume that factors such as the manufacturing process, the storage conditions and the different geographic origin of the samples may contribute to such variability.
Characterisation of model compounds and a synthetic coal by TG/MS/FTIR to represent the pyrolysis behaviour of coal

Energy Technology Data Exchange (ETDEWEB)

Arenillas, A.; Pevida, C.; Rubiera, F.; Garcia, R.; Pis, J.J. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain)

2004-06-01

Coal pyrolysis is the initial, accompanying reaction of a number of coal conversion processes such as hydrogenation, combustion and gasification. However, because of the inherent complexity of coal composition, it is difficult to describe coal pyrolysis clearly. Single model compounds have been used before in order to provide additional insight into the complex processes that occur in the pyrolysis of coal. Yet the picture obtained is a simplified one and certain important aspects such as coal structure, interactions between different surface groups and cross-links are omitted. The approach used in this work involves the preparation of a synthetic coal, SC, with a known structure by curing a mixture of single, well-defined model compounds. By means of chemical characterisation, the SC was shown to contain the macroscopic features of a high volatile coal (proximate and ultimate analyses). FTIR characterisation revealed the presence of functional groups similar to those of coal in the structure of the SC. Temperature-programmed pyrolysis tests were performed in a thermobalance linked to a mass spectrometer and a Fourier transform infrared analyser (TG/MS/FTIR). The thermal behaviour of the synthetic coal (i.e., rate of mass loss and the evolution profiles of gaseous compounds during pyrolysis tests) is very similar to that of the high volatile bituminous coal which was used as a reference material. The great advantage of using SC lies in the fact that its composition and structure can be accurately determined and employed in subsequent applications in basic and mechanistic studies.
Using Hidden Markov Models to characterise intermittent social behaviour in fish shoals

Science.gov (United States)

Bode, Nikolai W. F.; Seitz, Michael J.

2018-02-01

The movement of animals in groups is widespread in nature. Understanding this phenomenon presents an important problem in ecology with many applications that range from conservation to robotics. Underlying all group movements are interactions between individual animals and it is therefore crucial to understand the mechanisms of this social behaviour. To date, despite promising methodological developments, there are few applications to data of practical statistical techniques that inferentially investigate the extent and nature of social interactions in group movement. We address this gap by demonstrating the usefulness of a Hidden Markov Model approach to characterise individual-level social movement in published trajectory data on three-spined stickleback shoals ( Gasterosteus aculeatus) and novel data on guppy shoals ( Poecilia reticulata). With these models, we formally test for speed-mediated social interactions and verify that they are present. We further characterise this inferred social behaviour and find that despite the substantial shoal-level differences in movement dynamics between species, it is qualitatively similar in guppies and sticklebacks. It is intermittent, occurring in varying numbers of individuals at different time points. The speeds of interacting fish follow a bimodal distribution, indicating that they are either stationary or move at a preferred mean speed, and social fish with more social neighbours move at higher speeds, on average. Our findings and methodology present steps towards characterising social behaviour in animal groups.
Synthesis, characterisation and biological properties of gold(III) compounds with modified bipyridine and bipyridylamine ligands.

Science.gov (United States)

Casini, Angela; Diawara, Mariam Celine; Scopelliti, Rosario; Zakeeruddin, Shaik Mohammed; Grätzel, Michael; Dyson, Paul J

2010-03-07

Square planar gold(III) complexes that contain functionalised bipyridine ligands of general formula [Au(N--N)Cl(2)][PF(6)] [where N--N = 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine, 4,4'-dimethoxy-2,2'-bipyridine and 4,4'-diamino-2,2'-bipyridine] have been prepared and characterised by NMR spectroscopy and mass spectrometry. Two of the complexes have also been characterised in the solid state by X-ray crystallography. In addition, a gold(iii) compound bearing a dipyridin-2-ylamine ligand was also prepared and characterised. The complexes were found to undergo hydrolysis under pseudo-physiological conditions. Moreover, the complexes showed moderate to good cytotoxicity in vitro towards the A2780 human ovarian carcinoma cell line and the cisplatin resistant variant A2780cisR. Reactivity studies with biomolecules, such as reducing agents, plasmid DNA and a model protein (ubiquitin) were also performed to provide tentative insights into the mode of action of the complexes.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.