Hot-boning enhances cook yield of boneless skinless chicken thighs.

Science.gov (United States)

Zhuang, H; Bowker, B C; Buhr, R J; Brambila, G Sanchez

2014-06-01

Three experiments were conducted to evaluate the effects of postmortem deboning time on cook yield of boneless skinless chicken thighs. In experiment 1, chicken thigh meat was deboned at 0.75 (hot-bone), 2, and 24 h postmortem (PM) and trimmed to obtain mainly iliotibialis muscle. Samples were cooked directly from a frozen state. Cook yield of the muscle was significantly influenced by PM deboning time. Hot-boned thighs exhibited a 7% greater cook yield than the samples deboned at 24 h. In experiment 2, boneless skinless chicken thighs were deboned at 0.3, 2, and 24 h PM and cooked directly from a fresh, never-frozen state at 24 h PM. Cook yield of the hot-boned thighs was significantly higher than those of the 2 and 24 h deboned samples, which did not differ from each other. In experiment 3, whole legs (thigh + drumstick) were cut from the carcass backbone at 0.3 (hot-cut), 2, and 24 h PM. Thighs were separated from the legs (drumsticks) at either the same time the whole legs were removed from the carcasses or at 24 h PM. Intact thighs (bone in) were cooked fresh at 24 h PM. Color of fresh thigh muscles, cook yield, and Warner-Bratzler shear force of cooked samples were measured. Cook yield of the thighs cut from the backbone before chilling was significantly higher than those cut from the carcasses at 2 and 24 h PM, which did not differ from each other. The PM time at which intact thighs were separated from the leg (drumstick) did not influence cook yield. These results demonstrate that postmortem deboning time can significantly affect cook yield of boneless skinless chicken thigh products. Deboning chicken thighs after chilling reduces the cook yield. Differences in the cook yield of thighs may also result from the removal of whole chicken legs from the carcass backbone. Poultry Science Association Inc.

Sources of pre-analytical variations in yield of DNA extracted from blood samples: analysis of 50,000 DNA samples in EPIC.

Directory of Open Access Journals (Sweden)

Elodie Caboux

Full Text Available The European Prospective Investigation into Cancer and nutrition (EPIC is a long-term, multi-centric prospective study in Europe investigating the relationships between cancer and nutrition. This study has served as a basis for a number of Genome-Wide Association Studies (GWAS and other types of genetic analyses. Over a period of 5 years, 52,256 EPIC DNA samples have been extracted using an automated DNA extraction platform. Here we have evaluated the pre-analytical factors affecting DNA yield, including anthropometric, epidemiological and technical factors such as center of subject recruitment, age, gender, body-mass index, disease case or control status, tobacco consumption, number of aliquots of buffy coat used for DNA extraction, extraction machine or procedure, DNA quantification method, degree of haemolysis and variations in the timing of sample processing. We show that the largest significant variations in DNA yield were observed with degree of haemolysis and with center of subject recruitment. Age, gender, body-mass index, cancer case or control status and tobacco consumption also significantly impacted DNA yield. Feedback from laboratories which have analyzed DNA with different SNP genotyping technologies demonstrate that the vast majority of samples (approximately 88% performed adequately in different types of assays. To our knowledge this study is the largest to date to evaluate the sources of pre-analytical variations in DNA extracted from peripheral leucocytes. The results provide a strong evidence-based rationale for standardized recommendations on blood collection and processing protocols for large-scale genetic studies.

Preparation of higher-actinide burnup and cross section samples

International Nuclear Information System (INIS)

Adair, H.L.; Kobisk, E.H.; Quinby, T.C.; Thomas, D.K.; Dailey, J.M.

1981-01-01

A joint research program involving the United States and the United Kingdom was instigated about four years ago for the purpose of studying burnup of higher actinides using in-core irradiation in the fast reactor at Dounreay, Scotland. Simultaneously, determination of cross sections of a wide variety of higher actinide isotopes was proposed. Coincidental neutron flux and energy spectral measurements were to be made using vanadium encapsulated dosimetry materials in the immediate region of the burnup and cross section samples. The higher actinide samples chosen for the burnup study were 241 Am and 244 Cm in the forms of Am 2 O 3 , Cm 2 O 3 , and Am 6 Cm(RE) 7 O 21 , where (RE) represents a mixture of lanthanide sesquioxides. It is the purpose of this paper to describe technology development and its application in the preparation of the fuel specimens and the cross section specimens that are being used in this cooperative program

Yield, yield components and dry matter digestibility of alfalfa experimental populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available Alfalfa is the most important forage crop grown in the temperate regions. It is cultivated for production of vegetative aerial mass used fresh or as hay, and recently as haylage and silage. In many centres worldwide, efforts are made to breed and create new alfalfa cultivars with both higher yields and of higher nutritional value. The aim of this paper was to determine yield and digestibility of 12 experimental populations of alfalfa, and to compare their results to the yields of well-known domestic alfalfa commercial cultivars. The results show significant differences in yield of green forage and dry matter among alfalfa populations, as well as in yield components, height, proportion of leaves in yield and growth rate (tab. 1, 2 and 3. Differences between in vitro digestible dry matter (% and yields of in vitro digestible dry matter (t ha-1 were also significant (tab. 5 and 6. Yield and quality of experimental populations were at the same level or higher than of control cultivars. Synthetic SINUSA exceeded the control cutivars (NS Mediana ZMS V and Banat VS in yield and quality of dry matter. .

Predictors of mother and child DNA yields in buccal cell samples collected in pediatric cancer epidemiologic studies: a report from the Children's Oncology group.

Science.gov (United States)

Poynter, Jenny N; Ross, Julie A; Hooten, Anthony J; Langer, Erica; Blommer, Crystal; Spector, Logan G

2013-08-12

Collection of high-quality DNA is essential for molecular epidemiology studies. Methods have been evaluated for optimal DNA collection in studies of adults; however, DNA collection in young children poses additional challenges. Here, we have evaluated predictors of DNA quantity in buccal cells collected for population-based studies of infant leukemia (N = 489 mothers and 392 children) and hepatoblastoma (HB; N = 446 mothers and 412 children) conducted through the Children's Oncology Group. DNA samples were collected by mail using mouthwash (for mothers and some children) and buccal brush (for children) collection kits and quantified using quantitative real-time PCR. Multivariable linear regression models were used to identify predictors of DNA yield. Median DNA yield was higher for mothers in both studies compared with their children (14 μg vs. mothers or children in this analysis. The association with seasonality suggests that conditions during transport may influence DNA yield. The low yields observed in most children in these studies highlight the importance of developing alternative methods for DNA collection in younger age groups.

Optimizing rate of nitrogen application for higher growth and yield of wheat (triticum aestivum l.) cultivars

International Nuclear Information System (INIS)

Maqsood, M.; Shehzad, M.A.; Asim, A.; Ahmad, W.

2012-01-01

In order to optimize the nitrogen rates in three wheat (Triticum aestivum L.) cultivars for obtaining higher grain yield, a split plot experiment based on Randomized Complete Block Design with three replicates was conducted in the research field of University of Agriculture, Faisalabad during Rabi season 2006-07. Among treatments nitrogen levels (N0= 0, N/sub 1/= 50, N2= 100, N3= 150 kg ha/sup -1/) in main while wheat cultivars (V1= Punjnad-I, V/sub 2/= Fareed-2006, V3=Uqab-2000) were allocated in sub plots during the course of growing season. Traits as plant height, fertile tillers, spike length, spikelets spike-1, grains spike-1, 1000-grain weight, straw yield, grain yield and harvest index (HI) were significantly (P=0.05) affected by treatment combinations. Maximum grain yield was obtained by V3 (Uqab-2000) cultivar when treated with N3 (150 kg ha/sup -1/) fertilizer level. Also, results showed that with increasing nitrogen rates, wheat yield increases significantly up to a level of significance (P=0.05). Increasing nitrogen levels led to significantly increase in plant height (101.81 cm), spike bearing tillers (495.77), grains spike/sup -1/ (61.45), straw yield (8.60 t ha/sup -1/) and harvest index (36.17%) of V3 (Uqab-2000). In all traits except germination count, V3 (Uqab-2000) was found to be superior. (author)

Improving the Yield of Histological Sampling in Patients With Suspected Colorectal Cancer During Colonoscopy by Introducing a Colonoscopy Quality Assurance Program.

Science.gov (United States)

Gado, Ahmed; Ebeid, Basel; Abdelmohsen, Aida; Axon, Anthony

2011-08-01

Masses discovered by clinical examination, imaging or endoscopic studies that are suspicious for malignancy typically require biopsy confirmation before treatment is initiated. Biopsy specimens may fail to yield a definitive diagnosis if the lesion is extensively ulcerated or otherwise necrotic and viable tumor tissue is not obtained on sampling. The diagnostic yield is improved when multiple biopsy samples (BSs) are taken. A colonoscopy quality-assurance program (CQAP) was instituted in 2003 in our institution. The aim of this study was to determine the effect of instituting a CQAP on the yield of histological sampling in patients with suspected colorectal cancer (CRC) during colonoscopy. Initial assessment of colonoscopy practice was performed in 2003. A total of five patients with suspected CRC during colonoscopy were documented in 2003. BSs confirmed CRC in three (60%) patients and were nondiagnostic in two (40%). A quality-improvement process was instituted which required a minimum six BSs with adequate size of the samples from any suspected CRC during colonoscopy. A total of 37 patients for the period 2004-2010 were prospectively assessed. The diagnosis of CRC was confirmed with histological examination of BSs obtained during colonoscopy in 63% of patients in 2004, 60% in 2005, 50% in 2006, 67% in 2007, 100% in 2008, 67% in 2009 and 100% in 2010. The yield of histological sampling increased significantly ( p quality assurance and improvement program increased the yield of histological sampling in patients with suspected CRC during colonoscopy.

Impact of Different Milk Yields on Milk Quality in Bohemian Spotted Cattle

Directory of Open Access Journals (Sweden)

O. Hanuš

2007-01-01

Full Text Available The milk yield (MY is a significant economic and health factor. MY influences the health state of dairy cows, their reproduction performance, longevity and milk indicators (MIs. Differences within MIs between 2 higher (1; 8 348 kg per lactation; 240 individual milk samples and 2 lower yielding herds (2; 7 344; 239 of Bohemian Spotted dairy cows (B were tested. Sampling was carried out during summer and winter feeding seasons. Lactation factors were well balanced. Group 1 was on a higher genetical level, had better nutrition and higher MY by 13.7% (P P P > 0.05. The U was higher (5.707 > 4.365 mmol l-1 in group 1, AC and URN as well (0.0362 > 0.0238 mmol l-1 and 51.94 > 41.97%. It corresponds with nitrogen and energy metabolism.

Use of Capillary Blood Samples Leads to Higher Parasitemia Estimates and Higher Diagnostic Sensitivity of Microscopic and Molecular Diagnostics of Malaria than Venous Blood Samples.

Science.gov (United States)

Mischlinger, Johannes; Pitzinger, Paul; Veletzky, Luzia; Groger, Mirjam; Zoleko-Manego, Rella; Adegnika, Ayola A; Agnandji, Selidji T; Lell, Bertrand; Kremsner, Peter G; Tannich, Egbert; Mombo-Ngoma, Ghyslain; Mordmüller, Benjamin; Ramharter, Michael

2018-05-25

Diagnosis of malaria is usually based on samples of peripheral blood. However, it is unclear whether capillary (CAP) or venous (VEN) blood samples provide better diagnostic performance. Quantitative differences of parasitemia between CAP and VEN blood and diagnostic performance characteristics were investigated. Patients were recruited between September 2015 and February 2016 in Gabon. Light microscopy and qPCR quantified parasitemia of paired CAP and VEN samples, whose preparation followed the exact same methodology. CAP and VEN performance characteristics using microscopy were evaluated against a qPCR gold-standard. Microscopy revealed a median (IQR) parasites/L of 495 (853,243) in CAP and 429 (524,074) in VEN samples manifesting in a +16.6% (p=0.04) higher CAPparasitemia compared with VENparasitemia. Concordantly, qPCR demonstrated that -0.278 (p=0.006) cycles were required for signal detection in CAP samples. CAPsensitivity of microscopy relative to the gold-standard was 81.5% (77.485.6%) versus VENsensitivity of 73.4% (68.878.1%), while CAPspecificity and VENspecificity were 91%. CAPsensitivity and VENsensitivity dropped to 63.3% and 45.9%, respectively for a sub-population of low-level parasitemias while specificities were 92%. CAP sampling leads to higher parasitemias compared to VEN sampling and improves diagnostic sensitivity. These findings may have important implications for routine diagnostics, research and elimination campaigns of malaria.

On yield gaps and yield gains in intercropping

NARCIS (Netherlands)

Gou, Fang; Yin, Wen; Hong, Yu; Werf, van der Wopke; Chai, Qiang; Heerink, Nico; Ittersum, van Martin K.

2017-01-01

Wheat-maize relay intercropping has been widely used by farmers in northwest China, and based on field experiments agronomists report it has a higher productivity than sole crops. However, the yields from farmers’ fields have not been investigated yet. Yield gap analysis provides a framework to

Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

Science.gov (United States)

Duan, X.; Rong, L.; Gu, Z.; Feng, D.

2017-12-01

Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.

Effect of carrageenan addition on the yield and functional properties of charqui (Jerked Beef

Directory of Open Access Journals (Sweden)

Carlos Eduardo Rocha Garcia

2013-04-01

Full Text Available The objective of this work was to evaluate the application of carrageenan (CAR to improve the functional properties of the jerked beef (JF and to increase its processing yield. JB produced from Vastus lateralis with CAR (1.0% at 25ºC and NaCl (15.0% had approximately 15.0% higher moisture and a 32.0% higher processing yield in comparison to the control samples.JB-CAR presented shear force approximately 5.0 and 20% lower in the samples uncooked salted and desalted cooked, respectively, and sensorial acceptance above 80%. The results demonstrated the possibility of applying carrageenan to jerked beef in order to obtain an increase in the processing yield and a tender product while maintaining the sensorial quality and its intermediate-moisture meat product nature.

Synthetic Brassica napus L.: Development and Studies on Morphological Characters, Yield Attributes, and Yield

Directory of Open Access Journals (Sweden)

M. A. Malek

2012-01-01

Full Text Available Brassica napus was synthesized by hybridization between its diploid progenitor species B. rapa and B. oleracea followed by chromosome doubling. Cross with B. rapa as a female parent was only successful. Among three colchicine treatments (0.10, 0.15, and 0.20%, 0.15% gave the highest success (86% of chromosome doubling in the hybrids (AC; 2=19. Synthetic B. napus (AACC, 2=38 was identified with bigger petals, fertile pollens and seed setting. Synthetic B. napus had increased growth over parents and exhibited wider ranges with higher coefficients of variations than parents for morphological and yield contributing characters, and yield per plant. Siliqua length as well as beak length in synthetic B. napus was longer than those of the parents. Number of seeds per siliqua, 1000-seed weight and seed yield per plant in synthetic B. napus were higher than those of the parents. Although flowering time in synthetic B. napus was earlier than both parents, however the days to maturity was little higher over early maturing B. rapa parent. The synthesized B. napus has great potential to produce higher seed yield. Further screening and evaluation is needed for selection of desirable genotypes having improved yield contributing characters and higher seed yield.

Feasibility studies to assess the use of 236Pu as a radiochemical yield monitor in bioassay samples

International Nuclear Information System (INIS)

Sawant, P.D.; Kalsi, P.C.

2007-01-01

Various plutonium compounds are handled in nuclear facilities of BARC. Hence, there is a possibility of occupational workers getting exposed to Pu. In vitro bioassay monitoring in which Pu is separated by chemical procedures from excreta samples and estimated by alpha-spectrometry, is the method of choice for the evaluation of internal dose to the occupational workers handling Pu. However, this method requires a suitable Pu tracer for reducing the uncertainties due to chemical yield in the separation, electro-deposition and counting efficiency. 242 Pu is commonly used as a tracer but due to its non-availability, efforts were made earlier to indigenously synthesis 236 Pu by proton irradiation of 237 Np in BARC-TIFR pelletron facility. The present study, reports the feasibility of using 236 Pu as a radiochemical yield monitor (tracer) in bioassay samples. (author)

Effect of dislocation pile-up on size-dependent yield strength in finite single-crystal micro-samples

Energy Technology Data Exchange (ETDEWEB)

Pan, Bo; Shibutani, Yoji, E-mail: sibutani@mech.eng.osaka-u.ac.jp [Department of Mechanical Engineering, Osaka University, Suita 565-0871 (Japan); Zhang, Xu [State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace, Xi' an Jiaotong University, Xi' an 710049 (China); School of Mechanics and Engineering Science, Zhengzhou University, Zhengzhou 450001 (China); Shang, Fulin [State Key Laboratory for Strength and Vibration of Mechanical Structures, School of Aerospace, Xi' an Jiaotong University, Xi' an 710049 (China)

2015-07-07

Recent research has explained that the steeply increasing yield strength in metals depends on decreasing sample size. In this work, we derive a statistical physical model of the yield strength of finite single-crystal micro-pillars that depends on single-ended dislocation pile-up inside the micro-pillars. We show that this size effect can be explained almost completely by considering the stochastic lengths of the dislocation source and the dislocation pile-up length in the single-crystal micro-pillars. The Hall–Petch-type relation holds even in a microscale single-crystal, which is characterized by its dislocation source lengths. Our quantitative conclusions suggest that the number of dislocation sources and pile-ups are significant factors for the size effect. They also indicate that starvation of dislocation sources is another reason for the size effect. Moreover, we investigated the explicit relationship between the stacking fault energy and the dislocation “pile-up” effect inside the sample: materials with low stacking fault energy exhibit an obvious dislocation pile-up effect. Our proposed physical model predicts a sample strength that agrees well with experimental data, and our model can give a more precise prediction than the current single arm source model, especially for materials with low stacking fault energy.

99Mo Yield Using Large Sample Mass of MoO3 for Sustainable Production of 99Mo

Science.gov (United States)

Tsukada, Kazuaki; Nagai, Yasuki; Hashimoto, Kazuyuki; Kawabata, Masako; Minato, Futoshi; Saeki, Hideya; Motoishi, Shoji; Itoh, Masatoshi

2018-04-01

A neutron source from the C(d,n) reaction has the unique capability of producing medical radioisotopes such as 99Mo with a minimum level of radioactive waste. Precise data on the neutron flux are crucial to determine the best conditions for obtaining the maximum yield of 99Mo. The measured yield of 99Mo produced by the 100Mo(n,2n)99Mo reaction from a large sample mass of MoO3 agrees well with the numerical result estimated with the latest neutron data, which are a factor of two larger than the other existing data. This result establishes an important finding for the domestic production of 99Mo: approximately 50% of the demand for 99Mo in Japan could be met using a 100 g 100MoO3 sample mass with a single accelerator of 40 MeV, 2 mA deuteron beams.

Contributions to yield strength in an ultrafine grained 1050 aluminum alloy after DC current annealing

International Nuclear Information System (INIS)

Cao, Yiheng; He, Lizi; Zhou, Yizhou; Wang, Ping; Cui, Jianzhong

2016-01-01

The ultrafine grained (UFG) 1050 aluminum alloy was prepared by equal channel angular pressing at cryogenic temperature (cryoECAP). The evolution of the yield strength and microstructures of UFG 1050 aluminum alloy after direct electric current (DC current) annealing at 150–400 °C for 1 h were investigated by tensile test, electron back scattering diffraction pattern (EBSD) and transmission electron microscopy (TEM). For the cryoECAPed and annealed samples at 150–250 °C, the predominant boundaries are high angle boundaries (HABs) (>60%), many dislocations accumulate at subgrain and/or grain boundaries, the yield strength (126–159 MPa) mainly comes from the dislocation and grain boundary strengthening contributions. While an unusual increase in the yield strength (by 8.1–11.2%) observed in samples annealed at 150–200 °C is attributed to an additional strengthening contribution from the more HABs having stable structures which can act as effective barriers to dislocation motion during tensile deformation. When annealing at 300–400 °C, the microstructures are free of dislocations, the yield strength (29–45 MPa) comes from the grain boundary strengthening contribution. With the application of DC current, the larger grain size, lower dislocation density and higher fraction of LABs having misorientation angle between 3−7° in samples annealed at 150–250 °C result in the lower yield strength, while the smaller average grain sizes in samples annealed at 300–400 °C cause the higher yield strength.

Contributions to yield strength in an ultrafine grained 1050 aluminum alloy after DC current annealing

Energy Technology Data Exchange (ETDEWEB)

Cao, Yiheng [Key Lab of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819 (China); He, Lizi, E-mail: helizi@epm.neu.edu.cn [Key Lab of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819 (China); School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China); Zhou, Yizhou [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Wang, Ping; Cui, Jianzhong [Key Lab of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110819 (China); School of Materials Science and Engineering, Northeastern University, Shenyang 110819 (China)

2016-09-30

The ultrafine grained (UFG) 1050 aluminum alloy was prepared by equal channel angular pressing at cryogenic temperature (cryoECAP). The evolution of the yield strength and microstructures of UFG 1050 aluminum alloy after direct electric current (DC current) annealing at 150–400 °C for 1 h were investigated by tensile test, electron back scattering diffraction pattern (EBSD) and transmission electron microscopy (TEM). For the cryoECAPed and annealed samples at 150–250 °C, the predominant boundaries are high angle boundaries (HABs) (>60%), many dislocations accumulate at subgrain and/or grain boundaries, the yield strength (126–159 MPa) mainly comes from the dislocation and grain boundary strengthening contributions. While an unusual increase in the yield strength (by 8.1–11.2%) observed in samples annealed at 150–200 °C is attributed to an additional strengthening contribution from the more HABs having stable structures which can act as effective barriers to dislocation motion during tensile deformation. When annealing at 300–400 °C, the microstructures are free of dislocations, the yield strength (29–45 MPa) comes from the grain boundary strengthening contribution. With the application of DC current, the larger grain size, lower dislocation density and higher fraction of LABs having misorientation angle between 3−7° in samples annealed at 150–250 °C result in the lower yield strength, while the smaller average grain sizes in samples annealed at 300–400 °C cause the higher yield strength.

Studies of the physical, yield and failure behavior of aliphatic polyketones

Science.gov (United States)

Karttunen, Nicole Renee

This thesis describes an investigation into the multiaxial yield and failure behavior of an aliphatic polyketone terpolymer. The behavior is studied as a function of: stress state, strain rate, temperature, and sample processing conditions. Results of this work include: elucidation of the behavior of a recently commercialized polymer, increased understanding of the effects listed above, insight into the effects of processing conditions on the morphology of the polyketone, and a description of yield strength of this material as a function of stress state, temperature, and strain rate. The first portion of work focuses on the behavior of a set of samples that are extruded under "common" processing conditions. Following this reference set of tests, the effect of testing this material at different temperatures is studied. A total of four different temperatures are examined. In addition, the effect of altering strain rate is examined. Testing is performed under pseudo-strain rate control at constant nominal octahedral shear strain rate for each failure envelope. A total of three different rates are studied. An extension of the first portion of work involves modeling the yield envelope. This is done by combining two approaches: continuum level and molecular level. The use of both methods allows the description of the yield envelope as a function of stress state, strain rate and temperature. The second portion of work involves the effects of processing conditions. For this work, additional samples are extruded with different shear and thermal histories than the "standard" material. One set of samples is processed with shear rates higher and lower than the standard. A second set is processed at higher and lower cooling rates than the standard. In order to understand the structural cause for changes in behavior with processing conditions, morphological characterization is performed on these samples. In particular, the effect on spherulitic structure is important. Residual

Bulk density calculations from prompt gamma ray yield

International Nuclear Information System (INIS)

Naqvi, A.A.; Nagadi, M.M.; Al-Amoudi, O.S.B.; Maslehuddin, M.

2006-01-01

Full text: The gamma ray yield from a Prompt Gamma ray Neutron Activation Analysis (PGNAA) setup is a linear function of element concentration and neutron flux in a the sample with constant bulk density. If the sample bulk density varies as well, then the element concentration and the neutron flux has a nonlinear correlation with the gamma ray yield [1]. The measurement of gamma ray yield non-linearity from samples and a standard can be used to estimate the bulk density of the samples. In this study the prompt gamma ray yield from Blast Furnace Slag, Fly Ash, Silica Fumes and Superpozz cements samples have been measured as a function of their calcium and silicon concentration using KFUPM accelerator-based PGNAA setup [2]. Due to different bulk densities of the blended cement samples, the measured gamma ray yields have nonlinear correlation with calcium and silicon concentration of the samples. The non-linearity in the yield was observed to increase with gamma rays energy and element concentration. The bulk densities of the cement samples were calculated from ratio of gamma ray yield from blended cement and that from a Portland cement standard. The calculated bulk densities have good agreement with the published data. The result of this study will be presented

Measurement of 90Sr in fresh water samples

International Nuclear Information System (INIS)

Belanova, A.; Meresova, J.; Svetlik, I.; Tomaskova, L.

2008-01-01

This preliminary study show new experimental approach to the determination of the radionuclide 90 Sr in water samples. The new method of dynamic windows utilizing liquid scintillation counting was applied on model and surface water samples. Our results show the demand of separation technique with significantly higher yields. (authors)

Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

Science.gov (United States)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.

Extensive cultivation of soil and water samples yields various pathogens in patients with cystic fibrosis but not Burkholderia multivorans.

Science.gov (United States)

Peeters, Charlotte; Depoorter, Eliza; Praet, Jessy; Vandamme, Peter

2016-11-01

While the epidemiology of Burkholderia cepacia complex (Bcc) bacteria in cystic fibrosis (CF) patients suggests that Burkholderia multivorans is acquired from environmental sources, this species has rarely been isolated from soil and water samples. Multiple isolation strategies were applied to water and soil samples that were previously shown to be B. multivorans PCR positive. These included direct plating and liquid enrichment procedures and the use of selective media, acclimatizing recovery and co-cultivation with CF sputum. MALDI-TOF mass spectrometry and sequence analysis of 16S rRNA and housekeeping genes were used to identify all isolates. None of the approaches yielded B. multivorans isolates. Other Burkholderia species, several Gram-negative non-fermenting bacteria (including Cupriavidus, Inquilinus, Pandoraea, Pseudomonas and Stenotrophomonas) and rapidly growing mycobacteria (including Mycobacterium chelonae) were all isolated from water and soil samples. The use of Bcc isolation media yielded a surprisingly wide array of rare but often clinically relevant CF pathogens, confirming that soil and water are reservoirs of these infectious agents. Copyright © 2016 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

Wheat yield and physical properties of a brown latosol under no-tillage in south-central Paraná

Directory of Open Access Journals (Sweden)

Luiz Fernando Machado Kramer

2013-10-01

Full Text Available Soil management influences the chemical and physical properties of soil. Chemical conditions have been thoroughly studied, while the role of soil physical conditions regarding crop yield has been neglected. This study aimed to analyze the wheat yield and its relationship with physical properties of an Oxisol under no-tillage (NT. The study was carried out between 2010 and 2011, in Reserva do Iguaçu, State of Paraná, Brazil, on the Campo Bonito farm, after 25 years of NT management. Based on harvest maps of barley (2006, wheat (2007 and maize (2009 of a plot (150 ha, zones with higher and lower yield potential (Z1 and Z2, respectively were identified. Sampling grids with 16 units (50 x 50 m and three sampling points per unit were established. The wheat grain yield (GY and water infiltration capacity (WIC were evaluated in 2010. Soil samples with disturbed and undisturbed structure were collected from the 0.00-0.10 and 0.10-0.20 m layers. The former were used to determine soil organic carbon (Corg levels and the latter to determine soil bulk density (BD, total porosity (TP, macroporosity (Mac, and microporosity (Mic. Soil penetration resistance (PR and water content (SWC were also evaluated. The wheat GY of the whole plot was close to the regional average and the yield between the zones differed significantly, i.e. 22 % higher in Z1 than in Z2. No significant variation in Mic was observed between zones, but Z1 had higher Corg levels, SWC, TP and Mac and lower BD than Z2 in both soil layers, as well as a lower PR than Z2 in the 0.00-0.10 m layer. Therefore, soil physical conditions were more restrictive in Z2, in agreement with wheat yield and zone yield potential defined a priori, based on the harvest maps. Soil WIC in Z1 was significantly higher (30 % than in Z2, in agreement with the results of TP and Mac which were also higher in Z1 in both soil layers. The correlation analysis of data of the two layers showed a positive relationship between

Global evaluation of a semiempirical model for yield anomalies and application to within-season yield forecasting.

Science.gov (United States)

Schauberger, Bernhard; Gornott, Christoph; Wechsung, Frank

2017-11-01

Quantifying the influence of weather on yield variability is decisive for agricultural management under current and future climate anomalies. We extended an existing semiempirical modeling scheme that allows for such quantification. Yield anomalies, measured as interannual differences, were modeled for maize, soybeans, and wheat in the United States and 32 other main producer countries. We used two yield data sets, one derived from reported yields and the other from a global yield data set deduced from remote sensing. We assessed the capacity of the model to forecast yields within the growing season. In the United States, our model can explain at least two-thirds (63%-81%) of observed yield anomalies. Its out-of-sample performance (34%-55%) suggests a robust yield projection capacity when applied to unknown weather. Out-of-sample performance is lower when using remote sensing-derived yield data. The share of weather-driven yield fluctuation varies spatially, and estimated coefficients agree with expectations. Globally, the explained variance in yield anomalies based on the remote sensing data set is similar to the United States (71%-84%). But the out-of-sample performance is lower (15%-42%). The performance discrepancy is likely due to shortcomings of the remote sensing yield data as it diminishes when using reported yield anomalies instead. Our model allows for robust forecasting of yields up to 2 months before harvest for several main producer countries. An additional experiment suggests moderate yield losses under mean warming, assuming no major changes in temperature extremes. We conclude that our model can detect weather influences on yield anomalies and project yields with unknown weather. It requires only monthly input data and has a low computational demand. Its within-season yield forecasting capacity provides a basis for practical applications like local adaptation planning. Our study underlines high-quality yield monitoring and statistics as critical

Protein precipitation of diluted samples in SDS-containing buffer with acetone leads to higher protein recovery and reproducibility in comparison with TCA/acetone approach.

Science.gov (United States)

Santa, Cátia; Anjo, Sandra I; Manadas, Bruno

2016-07-01

Proteomic approaches are extremely valuable in many fields of research, where mass spectrometry methods have gained an increasing interest, especially because of the ability to perform quantitative analysis. Nonetheless, sample preparation prior to mass spectrometry analysis is of the utmost importance. In this work, two protein precipitation approaches, widely used for cleaning and concentrating protein samples, were tested and compared in very diluted samples solubilized in a strong buffer (containing SDS). The amount of protein recovered after acetone and TCA/acetone precipitation was assessed, as well as the protein identification and relative quantification by SWATH-MS yields were compared with the results from the same sample without precipitation. From this study, it was possible to conclude that in the case of diluted samples in denaturing buffers, the use of cold acetone as precipitation protocol is more favourable than the use of TCA/acetone in terms of reproducibility in protein recovery and number of identified and quantified proteins. Furthermore, the reproducibility in relative quantification of the proteins is even higher in samples precipitated with acetone compared with the original sample. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Local yield stress statistics in model amorphous solids

Science.gov (United States)

Barbot, Armand; Lerbinger, Matthias; Hernandez-Garcia, Anier; García-García, Reinaldo; Falk, Michael L.; Vandembroucq, Damien; Patinet, Sylvain

2018-03-01

We develop and extend a method presented by Patinet, Vandembroucq, and Falk [Phys. Rev. Lett. 117, 045501 (2016), 10.1103/PhysRevLett.117.045501] to compute the local yield stresses at the atomic scale in model two-dimensional Lennard-Jones glasses produced via differing quench protocols. This technique allows us to sample the plastic rearrangements in a nonperturbative manner for different loading directions on a well-controlled length scale. Plastic activity upon shearing correlates strongly with the locations of low yield stresses in the quenched states. This correlation is higher in more structurally relaxed systems. The distribution of local yield stresses is also shown to strongly depend on the quench protocol: the more relaxed the glass, the higher the local plastic thresholds. Analysis of the magnitude of local plastic relaxations reveals that stress drops follow exponential distributions, justifying the hypothesis of an average characteristic amplitude often conjectured in mesoscopic or continuum models. The amplitude of the local plastic rearrangements increases on average with the yield stress, regardless of the system preparation. The local yield stress varies with the shear orientation tested and strongly correlates with the plastic rearrangement locations when the system is sheared correspondingly. It is thus argued that plastic rearrangements are the consequence of shear transformation zones encoded in the glass structure that possess weak slip planes along different orientations. Finally, we justify the length scale employed in this work and extract the yield threshold statistics as a function of the size of the probing zones. This method makes it possible to derive physically grounded models of plasticity for amorphous materials by directly revealing the relevant details of the shear transformation zones that mediate this process.

Characteristics and Sampling Efficiency of Eight-Unit Linear Slot Impactor (EULSI)

National Research Council Canada - National Science Library

Kesavan, Jana S

2006-01-01

...%, respectively. The l-mum PSL and Bg particles yielded a sampling efficiency of 2l% + 3 and 17% + 12 respectively. The standard deviation for the measured sampling efficiency of the Bg particles was higher...

Preliminary study of light yield dependence on LAB liquid scintillator composition

International Nuclear Information System (INIS)

Ye Xingchen; Yu Boxiang; Zhou Xiang

2015-01-01

Liquid scintillator (LS) will be adopted as the detector material in JUNO (Jiangmen Underground Neutrino Observatory). The energy resolution requirement of JUNO is 3%, which has never previously been reached. To achieve this energy resolution, the light yield of liquid scintillator is an important factor. PPO (the fluor) and bis-MSB (the wavelength shifter) are the two main materials dissolved in LAB. To study the influence of these two materials on the transmission of scintillation photons in LS, 25 and 12 cm-long quartz vessels were used in a light yield experiment. LS samples with different concentration of PPO and bis-MSB were tested. At these lengths, the light yield growth is not obvious when the concentration of PPO is higher than 4 g/L. The influence from bis-MSB becomes insignificant when its concentration is higher than 8 mg/L. This result could provide some useful suggestions for the JUNO LS. (authors)

Yield strength, shear stress and toughness of YBCO samples textured by Bridgman technique

International Nuclear Information System (INIS)

Roa, J J; Capdevila, X G; Martinez, M; Segarra, M; Jimenez-Pique, E

2008-01-01

Mechanical properties of the orthorhombic phase of YBa 2 Cu 3 O 7-δ (Y-123) at room temperature have been investigated at different applied loads using nanoindentation technique. The study was carried out for several monodomains on the (001) planes for textured Bridgman samples with dispersed Y 2 BaCuO 5 (Y-211) particles as pinning centers. The yield strength (σ ys ), shear stress (τ m ) and toughness (K IC ) of Y123/Y211composite was determined at different applied loads. First and second mechanical properties have been calculated though the Hertz equations and the last one with Lawn et al. equations. Finally, the ultra-low imprints obtained by nanoindentation have been correlated with parameters obtained by Field Emission Scanning Electron Microscope (FE-SEM)

Comparison of sampling methods for hard-to-reach francophone populations: yield and adequacy of advertisement and respondent-driven sampling.

Science.gov (United States)

Ngwakongnwi, Emmanuel; King-Shier, Kathryn M; Hemmelgarn, Brenda R; Musto, Richard; Quan, Hude

2014-01-01

Francophones who live outside the primarily French-speaking province of Quebec, Canada, risk being excluded from research by lack of a sampling frame. We examined the adequacy of random sampling, advertising, and respondent-driven sampling for recruitment of francophones for survey research. We recruited francophones residing in the city of Calgary, Alberta, through advertising and respondentdriven sampling. These 2 samples were then compared with a random subsample of Calgary francophones derived from the 2006 Canadian Community Health Survey (CCHS). We assessed the effectiveness of advertising and respondent-driven sampling in relation to the CCHS sample by comparing demographic characteristics and selected items from the CCHS (specifically self-reported general health status, perceived weight, and having a family doctor). We recruited 120 francophones through advertising and 145 through respondent-driven sampling; the random sample from the CCHS consisted of 259 records. The samples derived from advertising and respondentdriven sampling differed from the CCHS in terms of age (mean ages 41.0, 37.6, and 42.5 years, respectively), sex (proportion of males 26.1%, 40.6%, and 56.6%, respectively), education (college or higher 86.7% , 77.9% , and 59.1%, respectively), place of birth (immigrants accounting for 45.8%, 55.2%, and 3.7%, respectively), and not having a regular medical doctor (16.7%, 34.5%, and 16.6%, respectively). Differences were not tested statistically because of limitations on the analysis of CCHS data imposed by Statistics Canada. The samples generated exclusively through advertising and respondent-driven sampling were not representative of the gold standard sample from the CCHS. Use of such biased samples for research studies could generate misleading results.

Measurements of sputtering yields for low-energy plasma ions

International Nuclear Information System (INIS)

Nishi, M.; Yamada, M.; Suckewer, S.; Rosengaus, E.

1979-04-01

Sputtering yields of various wall/limiter materials of fusion devices have been extensively measured in the relevant plasma environment for low-energy light ions (E 14 cm -3 and electron temperature up to 10eV. Target materials used were C (graphite), Ti, Mo, Ta, W, and Fe (stainless steel). In order to study the dependence of the sputtering yields on the incident energy of ions, the target samples were held at negative bias voltage up to 300V. The sputtering yields were determined by a weight-loss method and by spectral line intensity measurements. The data obtained in the present experiment agree well with those previously obtained at the higher energies (E greater than or equal to 200eV) by other authors using different schemes; the present data also extend to substantially lower energies (E approx. > 30eV) than hitherto

Satellite-based assessment of grassland yields

Science.gov (United States)

Grant, K.; Siegmund, R.; Wagner, M.; Hartmann, S.

2015-04-01

Cutting date and frequency are important parameters determining grassland yields in addition to the effects of weather, soil conditions, plant composition and fertilisation. Because accurate and area-wide data of grassland yields are currently not available, cutting frequency can be used to estimate yields. In this project, a method to detect cutting dates via surface changes in radar images is developed. The combination of this method with a grassland yield model will result in more reliable and regional-wide numbers of grassland yields. For the test-phase of the monitoring project, a study area situated southeast of Munich, Germany, was chosen due to its high density of managed grassland. For determining grassland cutting robust amplitude change detection techniques are used evaluating radar amplitude or backscatter statistics before and after the cutting event. CosmoSkyMed and Sentinel-1A data were analysed. All detected cuts were verified according to in-situ measurements recorded in a GIS database. Although the SAR systems had various acquisition geometries, the amount of detected grassland cut was quite similar. Of 154 tested grassland plots, covering in total 436 ha, 116 and 111 cuts were detected using CosmoSkyMed and Sentinel-1A radar data, respectively. Further improvement of radar data processes as well as additional analyses with higher sample number and wider land surface coverage will follow for optimisation of the method and for validation and generalisation of the results of this feasibility study. The automation of this method will than allow for an area-wide and cost efficient cutting date detection service improving grassland yield models.

Climatic and technological ceilings for Chinese rice stagnation based on yield gaps and yield trend pattern analysis.

Science.gov (United States)

Zhang, Tianyi; Yang, Xiaoguang; Wang, Hesong; Li, Yong; Ye, Qing

2014-04-01

Climatic or technological ceilings could cause yield stagnation. Thus, identifying the principal reasons for yield stagnation within the context of the local climate and socio-economic conditions are essential for informing regional agricultural policies. In this study, we identified the climatic and technological ceilings for seven rice-production regions in China based on yield gaps and on a yield trend pattern analysis for the period 1980-2010. The results indicate that 54.9% of the counties sampled experienced yield stagnation since the 1980. The potential yield ceilings in northern and eastern China decreased to a greater extent than in other regions due to the accompanying climate effects of increases in temperature and decreases in radiation. This may be associated with yield stagnation and halt occurring in approximately 49.8-57.0% of the sampled counties in these areas. South-western China exhibited a promising scope for yield improvement, showing the greatest yield gap (30.6%), whereas the yields were stagnant in 58.4% of the sampled counties. This finding suggests that efforts to overcome the technological ceiling must be given priority so that the available exploitable yield gap can be achieved. North-eastern China, however, represents a noteworthy exception. In the north-central area of this region, climate change has increased the yield potential ceiling, and this increase has been accompanied by the most rapid increase in actual yield: 1.02 ton ha(-1) per decade. Therefore, north-eastern China shows a great potential for rice production, which is favoured by the current climate conditions and available technology level. Additional environmentally friendly economic incentives might be considered in this region. © 2013 John Wiley & Sons Ltd.

The effect of blood sample positions in a water phantom at the time of irradiation on the dicentric yield

International Nuclear Information System (INIS)

Inoue, Yoshinori

1995-01-01

Blood samples of man and rabbit, placed at various distances from the surface of a water phantom with a dosimeter were exposed to 250mGy of 60 Co γ-rays. Increases in the dicentric yields in the lymphocytes were observed with increased distances from the surface of the water phantom. As a variation of the dicentric yield with increasing distance in water was found, in the experiment to obtain calibration curves for biological dosimetry, it is recommended that blood samples should be positioned at a constant distance from the surface of a water phantom at the time of irradiation. ICRU REPORT 23 recommends that the calibration measurement be carried out with an ionization chamber positioned at 5cm depth below the surface of a water phantom for 150 kV-10 MV X rays, and 137 Cs and 60 Co γ-rays. As the same reasons which determine a 5cm depth in the recommendation, should be applied to this case, it is desirable that the experiment be carried out with blood samples positioned at 5cm distance from the surface of a water phantom. (author)

Improved sugar yields from biomass sorghum feedstocks: comparing low-lignin mutants and pretreatment chemistries.

Science.gov (United States)

Godin, Bruno; Nagle, Nick; Sattler, Scott; Agneessens, Richard; Delcarte, Jérôme; Wolfrum, Edward

2016-01-01

For biofuel production processes to be economically efficient, it is essential to maximize the production of monomeric carbohydrates from the structural carbohydrates of feedstocks. One strategy for maximizing carbohydrate production is to identify less recalcitrant feedstock cultivars by performing some type of experimental screening on a large and diverse set of candidate materials, or by identifying genetic modifications (random or directed mutations or transgenic plants) that provide decreased recalcitrance. Economic efficiency can also be increased using additional pretreatment processes such as deacetylation, which uses dilute NaOH to remove the acetyl groups of hemicellulose prior to dilute acid pretreatment. In this work, we used a laboratory-scale screening tool that mimics relevant thermochemical pretreatment conditions to compare the total sugar yield of three near-isogenic brown midrib ( bmr ) mutant lines and the wild-type (WT) sorghum cultivar. We then compared results obtained from the laboratory-scale screening pretreatment assay to a large-scale pretreatment system. After pretreatment and enzymatic hydrolysis, the bmr mutants had higher total sugar yields than the WT sorghum cultivar. Increased pretreatment temperatures increased reactivity for all sorghum samples reducing the differences observed at lower reaction temperatures. Deacetylation prior to dilute acid pretreatment increased the total sugar yield for all four sorghum samples, and reduced the differences in total sugar yields among them, but solubilized a sizable fraction of the non-structural carbohydrates. The general trends of increased total sugar yield in the bmr mutant compared to the WT seen at the laboratory scale were observed at the large-scale system. However, in the larger reactor system, the measured total sugar yields were lower and the difference in total sugar yield between the WT and bmr sorghum was larger. Sorghum bmr mutants, which have a reduced lignin content showed

Sample preservation, transport and processing strategies for honeybee RNA extraction: Influence on RNA yield, quality, target quantification and data normalization.

Science.gov (United States)

Forsgren, Eva; Locke, Barbara; Semberg, Emilia; Laugen, Ane T; Miranda, Joachim R de

2017-08-01

Viral infections in managed honey bees are numerous, and most of them are caused by viruses with an RNA genome. Since RNA degrades rapidly, appropriate sample management and RNA extraction methods are imperative to get high quality RNA for downstream assays. This study evaluated the effect of various sampling-transport scenarios (combinations of temperature, RNA stabilizers, and duration) of transport on six RNA quality parameters; yield, purity, integrity, cDNA synthesis efficiency, target detection and quantification. The use of water and extraction buffer were also compared for a primary bee tissue homogenate prior to RNA extraction. The strategy least affected by time was preservation of samples at -80°C. All other regimens turned out to be poor alternatives unless the samples were frozen or processed within 24h. Chemical stabilizers have the greatest impact on RNA quality and adding an extra homogenization step (a QIAshredder™ homogenizer) to the extraction protocol significantly improves the RNA yield and chemical purity. This study confirms that RIN values (RNA Integrity Number), should be used cautiously with bee RNA. Using water for the primary homogenate has no negative effect on RNA quality as long as this step is no longer than 15min. Copyright © 2017 Elsevier B.V. All rights reserved.

Yield surface evolution for columnar ice

Science.gov (United States)

Zhou, Zhiwei; Ma, Wei; Zhang, Shujuan; Mu, Yanhu; Zhao, Shunpin; Li, Guoyu

A series of triaxial compression tests, which has capable of measuring the volumetric strain of the sample, were conducted on columnar ice. A new testing approach of probing the experimental yield surface was performed from a single sample in order to investigate yield and hardening behaviors of the columnar ice under complex stress states. Based on the characteristic of the volumetric strain, a new method of defined the multiaxial yield strengths of the columnar ice is proposed. The experimental yield surface remains elliptical shape in the stress space of effective stress versus mean stress. The effect of temperature, loading rate and loading path in the initial yield surface and deformation properties of the columnar ice were also studied. Subsequent yield surfaces of the columnar ice have been explored by using uniaxial and hydrostatic paths. The evolution of the subsequent yield surface exhibits significant path-dependent characteristics. The multiaxial hardening law of the columnar ice was established experimentally. A phenomenological yield criterion was presented for multiaxial yield and hardening behaviors of the columnar ice. The comparisons between the theoretical and measured results indicate that this current model is capable of giving a reasonable prediction for the multiaxial yield and post-yield properties of the columnar ice subjected to different temperature, loading rate and path conditions.

Seed yield components and their potential interaction in grasses - to what extend does seed weigth influence yield?

DEFF Research Database (Denmark)

Boelt, B; Gislum, R

2010-01-01

 In a first-year seed crop of red fescue (Festuca rubra L.) the degree of lodging was controlled by the use of Moddus (Trinexapac-ethyl). Seed weight was found to increase by the decreasing degree of lodging prior to harvest. The higher seed weights were accompanied by higher yields even though...... the number of reproductive tillers and floret site utilization (FSU) were unaffected by the treatments. Seed yield is affected by several yield components and reflects the interaction between the seed yield potential (e.g. number of reproductive tillers, number of spikelets and florets/spikelet per...... reproductive tiller), the utilization of the potential (e.g. seed set, seed weight) and the realization of the seed yield potential, defined as the number of florets forming a saleable seed. The realization of the seed yield potential is affected by seed retention, seed weight and other traits associated...

Pyrolysis of Lantana camara and Mimosa pigra: Influences of temperature, other process parameters and incondensable gas evolution on char yield and higher heating value.

Science.gov (United States)

Mundike, Jhonnah; Collard, François-Xavier; Görgens, Johann F

2017-11-01

Pyrolysis of invasive non-indigenous plants, Lantana camara (LC) and Mimosa pigra (MP) was conducted at milligram-scale for optimisation of temperature, heating rate and hold time on char yield and higher heating value (HHV). The impact of scaling-up to gram-scale was also studied, with chromatography used to correlate gas composition with HHV evolution. Statistically significant effects of temperature on char yield and HHV were obtained, while heating rate and hold time effects were insignificant. Milligram-scale maximised HHVs were 30.03MJkg -1 (525°C) and 31.01MJkg -1 (580°C) for LC and MP, respectively. Higher char yields and HHVs for MP were attributed to increased lignin content. Scaling-up promoted secondary char formation thereby increasing HHVs, 30.82MJkg -1 for LC and 31.61MJkg -1 for MP. Incondensable gas analysis showed that temperature increase beyond preferred values caused dehydrogenation that decreased HHV. Similarly, CO evolution profile explained differences in optimal HHV temperatures. Copyright © 2017 Elsevier Ltd. All rights reserved.

Yield of acid curd cheese produced from cow's milk from different lactation periods.

Science.gov (United States)

Salamończyk, Ewa; Młynek, Krzysztof; Guliński, Piotr; Zawadzka, Wiesława

2017-01-01

Milk production intensification has led in many countries, including Poland, to increased milk yields per cow. A higher milk yield resulted in changes in cow productivity, including extended lactations. There is a paucity of information on the quality of milk harvested during the last months of lactations exceed- ing 10 months. Production capacity cheese (“cheese expenditure”) is an important parameter of providing   a recovery as much as the possible components of the milk processed are dry substances, which in turn af- fects the economics of production. The aim of the study was to determine the influence of the lactation period (from standard lactation; extended lactation phase) on the performance of the acid curd cheese. the relation- ship between total protein content and acidity of fresh milk collected in two separate periods of lactation on the yield of acid cheese was also evaluated. The study included 1384 samples of milk collected from Polish Holstein-Friesian cows, the Black-White variety. The basic chemical composition of fresh milk and acid-curd cheese produced in the laboratory were analyzed. The cheese milk yield was evaluated on the basis of the quantity of the re- sulting curd mass. According to our estimates, under laboratory conditions an average of 100 kg of milk per cow in population produced an estimated 20.1 kg of curd cheese. The basic chemical composition of raw milk, which was diverse in terms of the period of lactation, showed a higher dry matter, fat and protein content in milk acquired during the extension phase of lactation compared to the milk of standard lactation. It has been found that the lower titratable acidity of fresh milk appeared with a higher yield of cheese curd. This difference was between 1.76 kg (with milk from cows milked during the extended lactation phase) to 2.72 kg from 100 kg of cheese milk (milk with the standard lactation). Thus, the optimum level of titratable acidity of milk for cheese yield is 6.0–7.5�

High-resolution mapping of yield curve shape and evolution for high porosity sandstones

Science.gov (United States)

Bedford, J. D.; Faulkner, D.; Wheeler, J.; Leclere, H.

2017-12-01

The onset of permanent inelastic deformation for porous rock is typically defined by a yield curve plotted in P-Q space, where P is the effective mean stress and Q is the differential stress. Sandstones usually have broadly elliptical shaped yield curves, with the low pressure side of the ellipse associated with localized brittle faulting (dilation) and the high pressure side with distributed ductile deformation (compaction). However recent works have shown that these curves might not be perfectly elliptical and that significant evolution in shape occurs with continued deformation. We therefore use a novel stress-probing methodology to map in high-resolution the yield curve shape for Boise and Idaho Gray sandstones (36-38% porosity) and also investigate curve evolution with increasing deformation. The data reveal yield curves with a much flatter geometry than previously recorded for porous sandstone and that the compactive side of the curve is partly comprised of a near vertical limb. The yield curve evolution is found to be strongly dependent on the nature of inelastic strain. Samples that were compacted under a deviatoric load, with a component of inelastic shear strain, were found to have yield curves with peaks that are approximately 50% higher than similar porosity samples that were hydrostatically compacted (i.e. purely volumetric strain). The difference in yield curve evolution along the different loading paths is attributed to mechanical anisotropy that develops during deviatoric loading by the closure of preferentially orientated fractures. Increased shear strain also leads to the formation of a plateau at the peak of the yield curve as samples deform along the deviatoric loading path. These results have important implications for understanding how the strength of porous rock evolves along different stress paths, including during fluid extraction from hydrocarbon reservoirs where the stress state is rarely isotropic.

Some compositional and health indicators of milk quality of dairy cows with higher milk yield at including of selected corn species into feeding ration

Directory of Open Access Journals (Sweden)

Jan Pozdíšek

2008-01-01

Full Text Available Because of economical reasons the substitution of maize by feed corn as wheat (Sulamit and triticale (Kitaro was revolved in concentrate part of dairy cow feeding rations. The design of mentioned replacement in feeding rations was carried out according to results of previous research (Pozdíšek and Vaculová, 2008 for nutrition experiment. The aim of this paper was to evaluate the possible effects of corn replacement in cow feeding rations on milk composition and properties. The expressively different variants of corn were selected for experiment in comparison to maize (reference. Dairy cows were fed by total mixed ration on the basis of maize and clover silage and hay. Otherwise the identical day feeding rations among cow groups differed only in concentrate portions ((K, control group maize 1.5 kg, wheat (P1 2.0 kg and triticale (P2 2.0 kg (experimental groups. Group feeding rations 1 (K, 2 (P1 and 3 (P2 had: NEL/kg dry (DM matter (6.524, 6.512 and 6.491; NL % in DM (17.9, 18.2 and 17.9; fibre % in DM (15.96, 15.74 and 15.72; PDIN/PDIE (1.189, 1.189 and 1.191. The experiment took six weeks, there were included 8, 9 and 9 cows (n = 26 of Czech Fleckvieh breed. Feed groups were well balanced in terms of milk yield, days in milk and number of lactation. The tie stable and pipeline milking equipment were used in experiment. Animals were milked twice a day and sampled at morning milking in intervals about seven days approximately. Cows were relatively healthy in terms of occurrence of milk secretion disorders. Within groups the individual milk samples (in total 182 in experiment were aggregated into bulk samples (n = 21 = 3 groups × 7 sampling periods, which were analysed on 45 milk indicators, 18 of them were evaluated in this paper. The differences in milk yield were significantly advantageous for K group (15.32 > 14.07 (wheat or 13.86 kg (triticale at morning milking, while fat (3.27 < 3.47 or 3.44 % was lower (P < 0.05. Lactose was not

Preparation of DNA from cytological material: effects of fixation, staining, and mounting medium on DNA yield and quality.

Science.gov (United States)

Dejmek, Annika; Zendehrokh, Nooreldin; Tomaszewska, Malgorzata; Edsjö, Anders

2013-07-01

Personalized oncology requires molecular analysis of tumor cells. Several studies have demonstrated that cytological material is suitable for DNA analysis, but to the authors' knowledge there are no systematic studies comparing how the yield and quality of extracted DNA is affected by the various techniques used for the preparation of cytological material. DNA yield and quality were compared using cultured human lung cancer cells subjected to different preparation techniques used in routine cytology, including fixation, mounting medium, and staining. The results were compared with the outcome of epidermal growth factor receptor (EGFR) genotyping of 66 clinical cytological samples using the same DNA preparation protocol. All tested protocol combinations resulted in fragment lengths of at least 388 base pairs. The mounting agent EcoMount resulted in higher yields than traditional xylene-based medium. Spray and ethanol fixation resulted in both a higher yield and better DNA quality than air drying. In liquid-based cytology (LBC) methods, CytoLyt solution resulted in a 5-fold higher yield than CytoRich Red. Papanicolaou staining provided twice the yield of hematoxylin and eosin staining in both liquid-based preparations. Genotyping outcome and quality control values from the clinical EGFR genotyping demonstrated a sufficient amount and amplifiability of DNA in both spray-fixed and air-dried cytological samples. Reliable clinical genotyping can be performed using all tested methods. However, in the cell line experiments, spray- or ethanol-fixed, Papanicolaou-stained slides provided the best results in terms of yield and fragment length. In LBC, the DNA recovery efficiency of the preserving medium may differ considerably, which should be taken into consideration when introducing LBC. Cancer (Cancer Cytopathol) 2013;121:344-353. © 2013 American Cancer Society. © 2013 American Cancer Society.

NIF total neutron yield diagnostic

International Nuclear Information System (INIS)

Cooper, Gary W.; Ruiz, Carlos L.

2001-01-01

We have designed a total neutron yield diagnostic for the National Ignition Facility (NIF) which is based on the activation of In and Cu samples. The particular approach that we have chosen is one in which we calibrate the entire counting system and which we call the ''F factor'' method. In this method, In and/or Cu samples are exposed to known sources of DD and DT neutrons. The activated samples are then counted with an appropriate system: a high purity Ge detector for In and a NaI coincidence system for Cu. We can then calculate a calibration factor, which relates measured activity to total neutron yield. The advantage of this approach is that specific knowledge of such quantities as cross sections and detector efficiencies is not needed. Unless the actual scattering environment of the NIF can be mocked up in the calibration experiment, the F factor will have to be modified using the results of a numerical simulation of the NIF scattering environment. In this article, the calibration factor methodology will be discussed and experimental results for the calibration factors will be presented. Total NIF neutron yields of 10 9 --10 19 can be measured with this method assuming a 50 cm stand-off distance can be employed for the lower yields

Improving the yield from fermentative hydrogen production.

Science.gov (United States)

Kraemer, Jeremy T; Bagley, David M

2007-05-01

Efforts to increase H(2) yields from fermentative H(2) production include heat treatment of the inoculum, dissolved gas removal, and varying the organic loading rate. Although heat treatment kills methanogens and selects for spore-forming bacteria, the available evidence indicates H(2) yields are not maximized compared to bromoethanesulfonate, iodopropane, or perchloric acid pre-treatments and spore-forming acetogens are not killed. Operational controls (low pH, short solids retention time) can replace heat treatment. Gas sparging increases H(2) yields compared to un-sparged reactors, but no relationship exists between the sparging rate and H(2) yield. Lower sparging rates may improve the H(2) yield with less energy input and product dilution. The reasons why sparging improves H(2) yields are unknown, but recent measurements of dissolved H(2) concentrations during sparging suggest the assumption of decreased inhibition of the H(2)-producing enzymes is unlikely. Significant disagreement exists over the effect of organic loading rate (OLR); some studies show relatively higher OLRs improve H(2) yield while others show the opposite. Discovering the reasons for higher H(2) yields during dissolved gas removal and changes in OLR will help improve H(2) yields.

Molecular Diagnostic Yield of Chromosomal Microarray Analysis and Whole-Exome Sequencing in Children With Autism Spectrum Disorder.

Science.gov (United States)

Tammimies, Kristiina; Marshall, Christian R; Walker, Susan; Kaur, Gaganjot; Thiruvahindrapuram, Bhooma; Lionel, Anath C; Yuen, Ryan K C; Uddin, Mohammed; Roberts, Wendy; Weksberg, Rosanna; Woodbury-Smith, Marc; Zwaigenbaum, Lonnie; Anagnostou, Evdokia; Wang, Zhuozhi; Wei, John; Howe, Jennifer L; Gazzellone, Matthew J; Lau, Lynette; Sung, Wilson W L; Whitten, Kathy; Vardy, Cathy; Crosbie, Victoria; Tsang, Brian; D'Abate, Lia; Tong, Winnie W L; Luscombe, Sandra; Doyle, Tyna; Carter, Melissa T; Szatmari, Peter; Stuckless, Susan; Merico, Daniele; Stavropoulos, Dimitri J; Scherer, Stephen W; Fernandez, Bridget A

2015-09-01

The use of genome-wide tests to provide molecular diagnosis for individuals with autism spectrum disorder (ASD) requires more study. To perform chromosomal microarray analysis (CMA) and whole-exome sequencing (WES) in a heterogeneous group of children with ASD to determine the molecular diagnostic yield of these tests in a sample typical of a developmental pediatric clinic. The sample consisted of 258 consecutively ascertained unrelated children with ASD who underwent detailed assessments to define morphology scores based on the presence of major congenital abnormalities and minor physical anomalies. The children were recruited between 2008 and 2013 in Newfoundland and Labrador, Canada. The probands were stratified into 3 groups of increasing morphological severity: essential, equivocal, and complex (scores of 0-3, 4-5, and ≥6). All probands underwent CMA, with WES performed for 95 proband-parent trios. The overall molecular diagnostic yield for CMA and WES in a population-based ASD sample stratified in 3 phenotypic groups. Of 258 probands, 24 (9.3%, 95%CI, 6.1%-13.5%) received a molecular diagnosis from CMA and 8 of 95 (8.4%, 95%CI, 3.7%-15.9%) from WES. The yields were statistically different between the morphological groups. Among the children who underwent both CMA and WES testing, the estimated proportion with an identifiable genetic etiology was 15.8% (95%CI, 9.1%-24.7%; 15/95 children). This included 2 children who received molecular diagnoses from both tests. The combined yield was significantly higher in the complex group when compared with the essential group (pairwise comparison, P = .002). [table: see text]. Among a heterogeneous sample of children with ASD, the molecular diagnostic yields of CMA and WES were comparable, and the combined molecular diagnostic yield was higher in children with more complex morphological phenotypes in comparison with the children in the essential category. If replicated in additional populations, these findings may

Response of maize varieties to nitrogen application for leaf area profile, crop growth, yield and yield components

International Nuclear Information System (INIS)

Akmal, M.; Hameed-urRehman; Farhatullah; Asim, M.; Akbar, H.

2010-01-01

An experiment was conducted at NWFP Agricultural University, Peshawar, to study maize varieties and Nitrogen (N) rates for growth, yield and yield components. Three varieties (Azam, Jalal and Sarhad white) and three N rates (90, 120, 150, kg N ha/sup -1/) were compared. Experiment was conducted in a Randomized Complete Block design; split plot arrangement with 4 replications. Uniform and recommended cultural practices were applied during the crop growth. The results revealed that maize variety 'Jalal' performed relatively better crop growth rate (CGR) and leaf area profile (LAP) at nodal position one to six as compared to the other two varieties (Sarhad white and Azam). This resulted higher radiation use efficiency by the crop canopy at vegetative stage of development and hence contributed higher assimilates towards biomass production. Heavier grains in number and weight were due to higher LAP and taller plants of Jalal which yielded higher in the climate. Nitrogen applications have shown that maize seed yield increase in quadratic fashion with increased N to a plateau level. Considering soil fertility status and cropping system, the 150 kg ha/sup -1/ N application to maize variety Jalal in Peshawar is required for maximum biological and seed production. (author)

Vulnerability of Maize Yields to Droughts in Uganda

Directory of Open Access Journals (Sweden)

Terence Epule Epule

2017-03-01

Full Text Available Climate projections in Sub-Saharan Africa (SSA forecast an increase in the intensity and frequency of droughts with implications for maize production. While studies have examined how maize might be affected at the continental level, there have been few national or sub-national studies of vulnerability. We develop a vulnerability index that combines sensitivity, exposure and adaptive capacity and that integrates agroecological, climatic and socio-economic variables to evaluate the national and spatial pattern of maize yield vulnerability to droughts in Uganda. The results show that maize yields in the north of Uganda are more vulnerable to droughts than in the south and nationally. Adaptive capacity is higher in the south of the country than in the north. Maize yields also record higher levels of sensitivity and exposure in the north of Uganda than in the south. Latitudinally, it is observed that maize yields in Uganda tend to record higher levels of vulnerability, exposure and sensitivity towards higher latitudes, while in contrast, the adaptive capacity of maize yields is higher towards the lower latitudes. In addition to lower precipitation levels in the north of the country, these observations can also be explained by poor soil quality in most of the north and socio-economic proxies, such as, higher poverty and lower literacy rates in the north of Uganda.

Comparing predicted yield and yield stability of willow and Miscanthus across Denmark

DEFF Research Database (Denmark)

Larsen, Søren; Jaiswal, Deepak; Bentsen, Niclas Scott

2016-01-01

was 12.1 Mg DM ha−1 yr−1 for willow and 10.2 Mg DM ha−1 yr−1 for Miscanthus. Coefficent of variation as a measure for yield stability was poorest on the sandy soils of northern and western Jutland and the year-to-year variation in yield was greatest on these soils. Willow was predicted to outyield...... Miscanthus on poor, sandy soils whereas Miscanthus was higher yielding on clay-rich soils. The major driver of yield in both crops was variation in soil moisture, with radiation and precipitation exerting less influence. This is the first time these two major feedstocks for northern Europe have been compared....... The semi-mechanistic crop model BioCro was used to simulate the production of both short rotation coppice (SRC) willow and Miscanthus across Denmark. Predictions were made from high spatial resolution soil data and weather records across this area for 1990-2010. The potential average, rain-fed mean yield...

Methane hydrate synthesis from ice: Influence of pressurization and ethanol on optimizing formation rates and hydrate yield

Science.gov (United States)

Chen, Po-Chun.; Huang, Wuu-Liang; Stern, Laura A.

2010-01-01

Polycrystalline methane gas hydrate (MGH) was synthesized using an ice-seeding method to investigate the influence of pressurization and ethanol on the hydrate formation rate and gas yield of the resulting samples. When the reactor is pressurized with CH4 gas without external heating, methane hydrate can be formed from ice grains with yields up to 25% under otherwise static conditions. The rapid temperature rise caused by pressurization partially melts the granular ice, which reacts with methane to form hydrate rinds around the ice grains. The heat generated by the exothermic reaction of methane hydrate formation buffers the sample temperature near the melting point of ice for enough time to allow for continuous hydrate growth at high rates. Surprisingly, faster rates and higher yields of methane hydrate were found in runs with lower initial temperatures, slower rates of pressurization, higher porosity of the granular ice samples, or mixtures with sediments. The addition of ethanol also dramatically enhanced the formation of polycrystalline MGH. This study demonstrates that polycrystalline MGH with varied physical properties suitable for different laboratory tests can be manufactured by controlling synthesis procedures or parameters. Subsequent dissociation experiments using a gas collection apparatus and flowmeter confirmed high methane saturation (CH 4·2O, with n = 5.82 ± 0.03) in the MGH. Dissociation rates of the various samples synthesized at diverse conditions may be fitted to different rate laws, including zero and first order.

The Effects of Drought Stress on Yield, Yield Components and Anti-oxidant of Two Garlic (Allium sativum L. Ecotypes with Different Planting Densities

Directory of Open Access Journals (Sweden)

shiva akbari

2016-07-01

Full Text Available Introduction Drought stress reduces plant growth by affecting various physiological and biochemical processes, such as photosynthesis, respiration, translocation, ion uptake, carbohydrates, nutrient metabolism and growth promoters. Garlic (Allium sativum L. is an annual bulb crop that has been cultivated since ancient times and was used as a spice and condiment for many centuries. Garlic is an important plant because of its pharmaceutical properties. The optimum yield of this bulb crop depends on well-managed irrigation, fertilization and cultivation practices. In the final and middle stages of growth, garlic is sensitive to water stress and low irrigation is unsuitable in these stages. This experiment was established to study the influence of drought stress and planting density on yield and its components and the non-enzymatic anti-oxidant content of two different garlic ecotypes. Materials and methods This study was conducted in 2011-2012 in a farmland at the south east of Semnan city. The experimental layout was a split-plot factorial with a randomized complete block design with three replications. The treatments were comprised of three factors: irrigation rates (60%, 80% and 100% of estimated crop evapotranspiration (ETC as the main plot and the factorial combination of three levels of planting density (30, 40 and 50 plants.m-2 and two ecotypes (Tabas and Toroud as the sub-plots. To estimate the crop water requirement, different meteorological parameters were collected from Semnan weather station and were used based on FAO-56 water irrigation calculation instructions. After harvesting, ten garlic plants were sampled randomly in each plot and bulb yield components were measured. To calculate the leaves anti-oxidant content, DPPH method was used. The statistical significances of mean values were assessed by analysis of variance and LSD tests at p≤0.05. All calculations were performed using SAS and Mstat-C softwares. Results and discussion

Yield and quality of brine-ripened cheeses, production from the milk of jersey and Simmental cows

Directory of Open Access Journals (Sweden)

Zh.T. Chitchyan

2016-06-01

Full Text Available Research has been conducted in Lusadzor community of Tavoush province in Armenia to determine the processability of milk samples collected from Jersey and Simmental cows for cheese manufacturing. The chemical composition as well as physical–chemical and technological parameters of the milk samples have been analyzed experimentally. In addition, the researchers estimated physical, chemical and organoleptic parameters as well as the yield of the cheese produced from the bulk milk collected from Jersey and Simmental cows. The results of the research proved that the milk samples collected from Jersey and Simmental cows possess the necessary physical–chemical and technological properties and can be used as high-quality raw material for manufacturing brine-ripened (pickled cheese. The highest content of dry matter, observed in the milk collected from Jersey cows, stemmed from the high contents of fat, protein and minerals. The content of lactose (milk sugar and physical characteristics (density, freezing temperature did not vary significantly across the samples. The rennet clots formed in the milk collected from Jersey cows were characterized by higher structural–mechanical parameters and syneresis. Jersey milk possesses the qualitative characteristics that best contribute to high cheese yield, which allows for the most efficient cheese production. Cheese manufactured from Jersey milk is distinguished by less water content, higher fat and protein contents and higher organoleptic indicators, which all together improve the quality of cheese turning it into a highly competitive product.

Influence of the tip mass on the tip-sample interactions in TM-AFM

Energy Technology Data Exchange (ETDEWEB)

Pishkenari, Hossein Nejat, E-mail: nejat@mech.sharif.edu [Nano-Robotics Laboratory, Center of Excellence in Design, Robotics and Automation, School of Mechanical Engineering, Sharif University of Technology, Tehran, P.O. Box 11365-9465 (Iran, Islamic Republic of); Meghdari, Ali [Nano-Robotics Laboratory, Center of Excellence in Design, Robotics and Automation, School of Mechanical Engineering, Sharif University of Technology, Tehran, P.O. Box 11365-9465 (Iran, Islamic Republic of)

2011-07-15

This paper focuses on the influences of the tip mass ratio (the ratio of the tip mass to the cantilever mass), on the excitation of higher oscillation eigenmodes and also on the tip-sample interaction forces in tapping mode atomic force microscopy (TM-AFM). A precise model for the cantilever dynamics capable of accurate simulations is essential for the investigation of the tip mass effects on the interaction forces. In the present work, the finite element method (FEM) is used for modeling the AFM cantilever to consider the oscillations of higher eigenmodes oscillations. In addition, molecular dynamics (MD) is used to calculate precise data for the tip-sample force as a function of tip vertical position with respect to the sample. The results demonstrate that in the presence of nonlinear tip-sample interaction forces, the tip mass ratio plays a significant role in the excitations of higher eigenmodes and also in the normal force applied on the surface. Furthermore, it has been shown that the difference between responses of the FEM and point-mass models in different system operational conditions is highly affected by the tip mass ratio. -- Highlights: {yields} A strong correlation exists between the tip mass ratio and the 18th harmonic amplitude. {yields} Near the critical tip mass ratio a small change in the tip mass may lead to a significant force change. {yields} Inaccuracy of the lumped model depends significantly on the tip mass ratio.

Influence of temperature on products yield of Eucalyptus microcorys carbonization

Directory of Open Access Journals (Sweden)

Renato da Silva Vieira

2013-03-01

Full Text Available During charcoal production different products are formed. These products are influenced primarily by the temperature of carbonization. Given that charcoal is the main input in the production of pig iron in Brazil, this study evaluated the influence of final temperature of carbonization of the products generated and also the influence of the radial and longitudinal sampling on the yield of each product. Samples were taken from internal and external position along the radius and also from three different heights from four Eucalyptus microcorys trees. The samples were carbonized in an electric furnace with an experimental water-cooled condenser and a collecting bottle of condensable volatile materials. The final temperatures of carbonization were 500, 600, 700, 800 and 900°C. The gravimetric yield, tar and non-condensable gases were calculated. The results showed no difference in the gravimetric yield in the longitudinal and radial positions studied, while the tar yield and non-condensable gases showed temperature variations of 700°C and 800°C and the variation of the gravimetric yield temperatures between 500°C to 900°C was 15%, the change of yield of tar from the radial direction of sampling was on average 8%, the variation of the yield of non-condensable gases in a radial sampling was on average 16%.

Targhee Russet: A high yielding dual purpose, long russet potato cultivar having higher protein and vitamin C content and resistance to tuber soft rot

Science.gov (United States)

Targhee Russet is a dark-skinned russet potato variety with tubers slightly longer than Russet Burbank. It produces higher total and marketable yields than does Russet Burbank at most of the sites it was tested in the western United States. Tuber dormancy is about 58 days shorter than Russet Burba...

A preliminary yield trial of some soybean mutant lines

International Nuclear Information System (INIS)

Ratma, Rivaie

1985-01-01

A preliminary yield trial of some soybean mutant lines, derived from irradiated Orba variety with dose of 0.40 kGy, were carried out during the wet and dry season in 1979-1982 in Muara and Citayam, Bogor. The result obtained showed that yield potential of mutant lines no. M6/40/10 was higher than that of the control in dry season in 1979 as well as in the wet season of 1979/80 in Muara. Whereas, the yield potential of the mutant lines no. M6/40/8 and no. M6/40/14 were higher than that of the control only in the wet season. The yield potential of semi dwarf mutant lines no. M6/40/68 was highly significant compared to that of the control in dry season in Muara and the wet season in 1981/82 in Citayam. Whereas, the yield potential of the mutant lines no. M6/40/69 was higher yield compared to that of the control in dry season in 1981 in Muara. (author). 10 refs

Soil Texture and Cultivar Effects on Rice (Oryza sativa, L. Grain Yield, Yield Components and Water Productivity in Three Water Regimes.

Directory of Open Access Journals (Sweden)

Fugen Dou

Full Text Available The objective of this study was to determine the effects of water regime/soil condition (continuous flooding, saturated, and aerobic, cultivar ('Cocodrie' and 'Rondo', and soil texture (clay and sandy loam on rice grain yield, yield components and water productivity using a greenhouse trial. Rice grain yield was significantly affected by soil texture and the interaction between water regime and cultivar. Significantly higher yield was obtained in continuous flooding than in aerobic and saturated soil conditions but the latter treatments were comparable to each other. For Rondo, its grain yield has decreased with soil water regimes in the order of continuous flooding, saturated and aerobic treatments. The rice grain yield in clay soil was 46% higher than in sandy loam soil averaged across cultivar and water regime. Compared to aerobic condition, saturated and continuous flooding treatments had greater panicle numbers. In addition, panicle number in clay soil was 25% higher than in sandy loam soil. The spikelet number of Cocodrie was 29% greater than that of Rondo, indicating that rice cultivar had greater effect on spikelet number than soil type and water management. Water productivity was significantly affected by the interaction of water regime and cultivar. Compared to sandy loam soil, clay soil was 25% higher in water productivity. Our results indicated that cultivar selection and soil texture are important factors in deciding what water management option to practice.

Development, yield and quality attributes of sugarcane cultivars fertigated by subsurface drip irrigation

Directory of Open Access Journals (Sweden)

André L. B. de O. Silva

2016-06-01

Full Text Available ABSTRACT The present study aimed to evaluate the development, yield and quality of four sugarcane cultivars fertigated by subsurface drip system. The experiment was carried out in Campinas-SP, Brazil, from January 2012 to November 2013, with the cultivars SP79-1011, IACSP94-2101, IACSP94-2094 and IACSP95-5000 subjected to daily irrigations. The irrigations depths were applied to bring soil moisture to field capacity. Soil moisture was monitored using soil moisture probes. Samples were collected along the crop cycle in order to evaluate crop development and yield, at the end of the first and second ratoons. Stalk height showed good correlation for the estimation of crop yield, with R2 equal to or higher than 0.96. The cultivar IACSP95-5000 showed the highest yield in the first ratoon. In the second ratoon the highest yield was observed in IACSP94-2101, followed by IACSP95-5000 and SP79-1011. Considering the yield results associated with the technological analysis, such as soluble solids content and apparent sucrose, the cultivar IACSP95-5000 excelled the others in the cultivation under subsurface drip irrigation.

Effect of NS-nitragin application on soybean yield and yield components

Directory of Open Access Journals (Sweden)

Marinković Jelena

2010-01-01

Full Text Available Agricultural soils of Serbia are low in soybean symbiotic bacteria and application of bacteriological preparations has been introduced as a regular cultivation practice when growing soybean. A trial was set up on experimental field of Institute of Field and Vegetable Crops from Novi Sad on chernozem soil using a randomized block design with four replicates. Mineral nitrogen fertilizers were used in rates of 0, 30, 60, and 90 kg ha-1 in the experiment. Each of the nitrogen treatments had two variations, with and without inoculation. The effects of inoculation and different nitrogen fertilizer rates on yield and yield components were determined based on the pod number, seed number, 1000 seed mass and protein and oil content in seeds. Significantly higher pod number was observed in inoculated plants with the application of 30 kg N ha-1. Inoculation with NS-Nitragin increased seed number per plant. In treatment with no mineral nitrogen applied and with application of 30 kg N ha-1 and 60 kg N ha-1, 1000 seed mass was statistically higher in inoculated plants than in uninoculated ones. Inoculation produced statistically significant difference in soybean yield only in the treatment with no mineral nitrogen applied. Inoculation and applied mineral nitrogen rates had no significant effect on protein content in soybean grain.

A numerical integration-based yield estimation method for integrated circuits

International Nuclear Information System (INIS)

Liang Tao; Jia Xinzhang

2011-01-01

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

A numerical integration-based yield estimation method for integrated circuits

Energy Technology Data Exchange (ETDEWEB)

Liang Tao; Jia Xinzhang, E-mail: tliang@yahoo.cn [Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

2011-04-15

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)

Yielding and flow of sheared colloidal glasses

International Nuclear Information System (INIS)

Petekidis, G; Vlassopoulos, D; Pusey, P N

2004-01-01

We have studied some of the rheological properties of suspensions of hard-sphere colloids with particular reference to behaviour near the concentration of the glass transition. First we monitored the strain on the samples during and after a transient step stress. We find that, at all values of applied step stress, colloidal glasses show a rapid, apparently elastic, recovery of strain after the stress is removed. This recovery is found even in samples which have flowed significantly during stressing. We attribute this behaviour to 'cage elasticity', the recovery of the stress-induced distorted environment of any particle to a more isotropic state when the stress is removed. Second, we monitored the stress as the strain rate dot γ of flowing samples was slowly decreased. Suspensions which are glassy at rest show a stress which becomes independent of dot γ as dot γ →0. This limiting stress can be interpreted as the yield stress of the glass and agrees well both with the yield stress deduced from the step stress and recovery measurements and that predicted by a recent mode coupling theory of sheared suspensions. Thus, the behaviours under steady shearing and transient step stress both support the idea that colloidal glasses have a finite yield stress. We note however that the samples do exhibit a slow accumulation of strain due to creep at stresses below the yield stress

Harvest season and head rice yield of upland rice cultivars submitted to parboiling

Directory of Open Access Journals (Sweden)

Diva Mendonça Garcia

2012-11-01

Full Text Available Normal 0 21 false false false PT-BR X-NONE X-NONE This work aimed to evaluate the effects of parboiling on the yield of upland rice cultivars harvested at different times. The cultivars were BRS Primavera and BRS Sertaneja, harvested at 30 and 47 days after flowering (DAF. For parboiling, samples were soaked in water bath at 65 °C in grain: water ratio of 1:1.6 in order to reach 25% and 30% moisture, and then were autoclaved for 10 minutes at 120 °C and 1.1 kg/cm2 of pressure. After drying up to 13% moisture in a greenhouse with forced air at 40 °C, samples were benefited, followed by separation using the trieur equipment and weighing to obtain the head rice yield. The results showed a higher yield for head rice harvested at 30 DAF than at 47 DAF (BRS Primavera 63.2 and 38.7%; BRS Sertaneja 68.5 and 55.7%, respectively. Parboiling increased the head rice yield, regardless of harvest season, but partly reflected the potential of the cultivar origin: BRS Primavera 70.06%, BRS Sertaneja 74.94%. It is concluded that the harvest season is one of the factors that most influence the quality of industrial rice and the effect of parboiling also depends on the potential of the material source.

YIELD STABILITY OF NEW HYBRID RICE ACROSS LOCATIONS

Directory of Open Access Journals (Sweden)

Satoto

2016-02-01

Full Text Available The adaptation of hybrid rice varieties mostly are in specific location and season, but there are some of the varieties have a wide adaptation then adopted by the farmer in the large area. Replicated yield trials were conducted to study the stability of hybrid rice yield and identify the best location to optimize their yield per ha. The trials were conducted in three location such as Sukamandi, Salatiga and Malang during two seasons in 2011. Data across location and season were analazed by using AMMI and Eberhart Russel methods. The AMMI analysis showed that the IR79156A/PK88 was adaptable to favorable environments but unstable. This hybrid is always performing well and produce the higher yield compare to check variety. Some of other hybrids were good only in specific location, i.e. IR62829A/BP2280-1E-12-22 and IR58029A/BP2280-1E-12-22. Those hybrids produced higher yield in Salatiga and Malang, respectively. Seem to AMMI analysis, the result of Eberhart and Russell method also showed that IR79156A/PK81 was the best hybrid with regression slope (b around 1 with the yield average higher than average of all hybrids. It indicated that this hybrid has a wide adaptation and probably can be cultivated in the wider ecosystem.

Impacts of Agro-Ecological Practices on Soil Losses and Cash Crop Yield

Directory of Open Access Journals (Sweden)

Daniela De Benedetto

2017-12-01

Full Text Available The aim of this study was to determine the impact of agro-ecological practices on soil losses, by assessing experimental field topography changes and cauliflower crop yield after an artificial extreme rainfall event. Data were collected in an innovative experimental device in which different combined agronomic strategies were tested such as hydraulic arrangement, crop rotations and agro-ecological service crops (ASC introduction. The collection of elevation data was carried out in kinematic way before rainfall, and in punctual surveys to evaluate the effects of artificial event on this parameter. Non-parametric tests were performed to evaluate differences between samples. High-resolution digital elevation models were generated from independent data using kriging, and elevation difference maps were produced. The results indicated that the data before and after the artificial rainfall were statistically different. The raised strips suffered soil loss showing that the strip with permanent intercropping was higher than that in the absence of ASC. A significant rise of elevation was registered in the furrowed strips after rainfall, and deposition of soil occurred at the lowest areas of the experimental field. Moreover, the study showed a relationship between cash crop yield and elevation: the areas with lower elevation (higher flooding were characterized by the lowest yield.

Effect of wheat gluten proteins on bioethanol yield from grain

Energy Technology Data Exchange (ETDEWEB)

Buresova, Iva [Agrotest Fyto, Ltd., Havlickova 2787/121, 767 01 Kromeriz (Czech Republic); Hrivna, Ludek [Mendel University in Brno, Zemedelska 1, 613 00 Brno (Czech Republic)

2011-04-15

Bioethanol can be used as motor fuel and/or as a gasoline enhancer. A high yield feedstock for bioethanol production is cereal grain. Cereal grains containing less gluten proteins (glutenin and gliadin), but high starch, are favoured by distillers because they increase the bioethanol conversion. The direct effect of wheat gluten proteins on bioethanol yield was studied on triticale grain. Examined triticale Presto 1R.1D{sub 5+10}-2 and Presto Valdy were developed by introducing selected segments of wheat chromosome 1D into triticale chromosome 1R. Even if the samples analysed in this study do not afford to make definitive assumptions, it can be noticed that in analysed cases the presence of gliadin had more significant effect on investigated parameters than the presence of glutenin. Despite the presence of glutenin subunits did not significantly decrease the investigated parameters - specific weight, Hagberg falling number and starch content in grain met the requirements for grain for bioethanol production - protein content was higher than is optimal. The fermentation experiments demonstrated good bioethanol yields but depression in grain yields caused by the presence of wheat gliadin and glutenin decreased the energy balance of Presto Valdy and Presto 1R.1D{sub 5+10}-2. (author)

Neutron moderation in a bulk sample and its effects on PGNAA setup geometry

International Nuclear Information System (INIS)

Al-Jarallah, M.I.; Naqvi, A.A.; Fazal-ur-Rehman,; Maselehuddin, M.; Abu-Jarad, F.; Raashid, M.

2003-01-01

In a prompt gamma ray neutron activation analysis (PGNAA) setup, the neutron moderation in the bulk sample also plays a key role. This can even dominate the thermalization effects of the external moderator in some cases. In order to study the neutron moderation effect in the bulk sample, moderators with two different sizes of the sample were tested at the King Fahd University of Petroleum and Minerals (KFUPM) PGNAA facility. In these tests, the thermal neutron relative intensity and prompt gamma ray yield from the two moderators were measured using nuclear track detectors (NTDs) and NaI detector, respectively. As predicted by Monte Carlo simulations, the measured intensity of thermal neutron inside the large sample cavity due to the external moderator was smaller than that from the smaller sample cavity. Due to its larger size, additional thermalization of neutrons will take place in the larger sample. In spite of smaller thermal neutron yield from the external moderator at the large sample location, higher yield of the prompt gamma ray was observed as compared to that from the smaller sample. This confirms the significance of neutron moderation effects in the bulk sample and can thereby affect the PGNAA geometry size. This allows larger samples in conjunction with smaller moderators in the PGNAA setup

Neutron moderation in a bulk sample and its effects on PGNAA setup geometry

Energy Technology Data Exchange (ETDEWEB)

Al-Jarallah, M.I. E-mail: mibrahim@kfupm.edu.sa; Naqvi, A.A.; Fazal-ur-Rehman,; Maselehuddin, M.; Abu-Jarad, F.; Raashid, M

2003-06-01

In a prompt gamma ray neutron activation analysis (PGNAA) setup, the neutron moderation in the bulk sample also plays a key role. This can even dominate the thermalization effects of the external moderator in some cases. In order to study the neutron moderation effect in the bulk sample, moderators with two different sizes of the sample were tested at the King Fahd University of Petroleum and Minerals (KFUPM) PGNAA facility. In these tests, the thermal neutron relative intensity and prompt gamma ray yield from the two moderators were measured using nuclear track detectors (NTDs) and NaI detector, respectively. As predicted by Monte Carlo simulations, the measured intensity of thermal neutron inside the large sample cavity due to the external moderator was smaller than that from the smaller sample cavity. Due to its larger size, additional thermalization of neutrons will take place in the larger sample. In spite of smaller thermal neutron yield from the external moderator at the large sample location, higher yield of the prompt gamma ray was observed as compared to that from the smaller sample. This confirms the significance of neutron moderation effects in the bulk sample and can thereby affect the PGNAA geometry size. This allows larger samples in conjunction with smaller moderators in the PGNAA setup.

SOIL QUALITY AND YIELD OF PINUS TAEDA IN THE PLANALTO CATARINENSE REGION

Directory of Open Access Journals (Sweden)

Cedinara Arruda Santana Morales

2010-12-01

Full Text Available In forest areas, the continual use of the soil alters its physical attributes and deteriorates its quality, in consequence of the traffic of machines used in forest operations, resulting in lower yields of crops. The relationship between soil quality at different sites and the production of Pinus taeda was evaluated in soils of the Planalto Catarinense region. Four farms were used, with two sites on each farm, chosen for the soil type and yield of the forest. The soil morphology was described and samples were collected in each pedogenetic horizon for physical and chemical analyses. Great variation exists in the physical attributes of the profiles, especially in the sequence and thickness of the horizons. Compaction was verified in the surface layer of the shallow profiles, evidenced by the higher bulk density and, or, soil resistance to penetration. In these profiles, the yield was reduced by between 14 and 36%, compared to the deeper profiles with a smaller degree of compaction.

Multilevel systematic sampling to estimate total fruit number for yield forecasts

DEFF Research Database (Denmark)

Wulfsohn, Dvora-Laio; Zamora, Felipe Aravena; Tellez, Camilla Potin

2012-01-01

procedure for unbiased estimation of fruit number for yield forecasts. In the Spring of 2009 we estimated the total number of fruit in several rows of each of 14 commercial fruit orchards growing apple (11 groves), kiwifruit (two groves), and table grapes (one grove) in central Chile. Survey times were 10...

Biochar boosts tropical but not temperate crop yields

Science.gov (United States)

Jeffery, Simon; Abalos, Diego; Prodana, Marija; Catarina Bastos, Ana; van Groenigen, Jan Willem; Hungate, Bruce A.; Verheijen, Frank

2017-05-01

Applying biochar to soil is thought to have multiple benefits, from helping mitigate climate change [1, 2], to managing waste [3] to conserving soil [4]. Biochar is also widely assumed to boost crop yield [5, 6], but there is controversy regarding the extent and cause of any yield benefit [7]. Here we use a global-scale meta-analysis to show that biochar has, on average, no effect on crop yield in temperate latitudes, yet elicits a 25% average increase in yield in the tropics. In the tropics, biochar increased yield through liming and fertilization, consistent with the low soil pH, low fertility, and low fertilizer inputs typical of arable tropical soils. We also found that, in tropical soils, high-nutrient biochar inputs stimulated yield substantially more than low-nutrient biochar, further supporting the role of nutrient fertilization in the observed yield stimulation. In contrast, arable soils in temperate regions are moderate in pH, higher in fertility, and generally receive higher fertilizer inputs, leaving little room for additional benefits from biochar. Our findings demonstrate that the yield-stimulating effects of biochar are not universal, but may especially benefit agriculture in low-nutrient, acidic soils in the tropics. Biochar management in temperate zones should focus on potential non-yield benefits such as lime and fertilizer cost savings, greenhouse gas emissions control, and other ecosystem services.

On the e-linac-based neutron yield

International Nuclear Information System (INIS)

Bunatyan, G.G.; Nikolenko, V.G.; Popov, A.B.

2010-01-01

We treat neutron generating in high atomic number materials due to the photonuclear reactions induced by the Bremsstrahlung of an electron beam produced by linear electron accelerator (e-linac). The dependence of neutron yield on the electron energy and the irradiated sample size is considered for various sample materials. The calculations are performed without resort to the so-called 'numerical Monte Carlo simulation'. The acquired neutron yields are well correlated with the data asserted in investigations performed at a number of the e-linac-driven neutron sources

Method for Determination of Neptunium in Large-Sized Urine Samples Using Manganese Dioxide Coprecipitation and ²⁴²Pu as Yield Tracer

DEFF Research Database (Denmark)

Qiao, Jixin; Hou, Xiaolin; Roos, Per

2013-01-01

A novel method for bioassay of large volumes of human urine samples using manganese dioxide coprecipitation for preconcentration was developed for rapid determination of 237Np. 242Pu was utilized as a nonisotopic tracer to monitor the chemical yield of 237Np. A sequential injection extraction chr...... and rapid analysis of neptunium contamination level for emergency preparedness....

Gas generation from Hanford grout samples

International Nuclear Information System (INIS)

Jonah, C.D.; Kapoor, S.; Matheson, M.S.; Mulac, W.A.; Meisel, D.

1996-01-01

In an extension of our work on the radiolytic processes that occur in the waste tanks at the Hanford site, we studied the gas generation from grout samples that contained nuclear waste simulants. Grout is one option for the long-term storage of low-level nuclear waste solutions but the radiolytic effects on grout have not been thoroughly defined. In particular, the generation of potentially flammable and hazardous gases required quantification. A research team at Argonne examined this issue and found that the total amount of gases generated radiolytically from the WHC samples was an order of magnitude higher than predicted. This implies that novel pathways fro charge migration from the solid grout to the associated water are responsible for gas evolution. The grout samples produced hydrogen, nitrous oxide, and carbon monoxide as well as nitrogen and oxygen. Yields of each of these substances were determined for doses that are equivalent to about 80 years storage of the grout. Carbon monoxide, which was produced in 2% yield, is of particular importance because even small amounts may adversely affect catalytic conversion instrumentation that has been planned for installation in the storage vaults

A large-scale, higher-level, molecular phylogenetic study of the insect order Lepidoptera (moths and butterflies)

Science.gov (United States)

Higher-level relationships within the Lepidoptera, and particularly within the species-rich subclade Ditrysia, are generally not well understood, although recent studies have yielded progress. 483 taxa spanning 115 of 124 families were sampled for 19 protein-coding nuclear genes. Their aligned nucle...

Wheat-yield response to irrigation and nitrogen

International Nuclear Information System (INIS)

Kirda, C.; Derici, R.; Kanber, R.; Yazar, A.; Koc, M.; Barutcular, C.

2000-01-01

Wheat-yield responses to the application of different rates of N fertilizer, under irrigated and rainfed conditions, were evaluated over four growing seasons. Nitrogen applied at tillering was utilized more effectively with proportionately less residual in the soil compared to that applied at planting. Subsequent crops of maize or cotton were positively affected by residual fertilizer N. Volatilization and leaching losses of applied N were small. Crop-water consumption showed strong positive associations with N rate. No wheat-grain-yield benefits accrued from irrigation, although straw yields were increased. Tiller production increased with N-fertilizer usage, however, tiller survival decreased at high N and was highest at 160 kg N ha -1 . Higher N rates produced higher stomatal conductance, increased rates of CO 2 assimilation and higher water-use efficiency. The CERES-Wheat growth-simulation model predicted rather closely the progress of dry-matter production, leaf area index, seasonal evapotranspiration, phenological development and of many other plant-growth attributes. The data indicated that the rate of 160 kg N ha -1 , which is commonly used by the farmers of the region, is acceptable, not only for optimum grain yields but also to minimize the risks of leaching NO 3 - to groundwater. (author)

Variables affecting simulated Be sputtering yields

Energy Technology Data Exchange (ETDEWEB)

Björkas, C., E-mail: carolina.bjorkas@helsinki.fi; Nordlund, K.

2013-08-15

Since beryllium is a strong candidate for the main plasma-facing material in future fusion reactors, its sputtering behaviour plays an important role in predicting the reactor’s life-time. Consensus about the actual sputtering yields has not yet been achieved, as observations are influenced by experimental method and/or studied sample. In this work, the beryllium sputtering due to deuterium and beryllium self-bombardment is analyzed using molecular dynamics simulations. The main methodological aspects that influence the outcome, such as flux and fluence of the bombardment, are highlighted, and it is shown that the simulated yields also depend on the sample structure and deuterium content.

A simplified field protocol for genetic sampling of birds using buccal swabs

Science.gov (United States)

Vilstrup, Julia T.; Mullins, Thomas D.; Miller, Mark P.; McDearman, Will; Walters, Jeffrey R.; Haig, Susan M.

2018-01-01

DNA sampling is an essential prerequisite for conducting population genetic studies. For many years, blood sampling has been the preferred method for obtaining DNA in birds because of their nucleated red blood cells. Nonetheless, use of buccal swabs has been gaining favor because they are less invasive yet still yield adequate amounts of DNA for amplifying mitochondrial and nuclear markers; however, buccal swab protocols often include steps (e.g., extended air-drying and storage under frozen conditions) not easily adapted to field settings. Furthermore, commercial extraction kits and swabs for buccal sampling can be expensive for large population studies. We therefore developed an efficient, cost-effective, and field-friendly protocol for sampling wild birds after comparing DNA yield among 3 inexpensive buccal swab types (2 with foam tips and 1 with a cotton tip). Extraction and amplification success was high (100% and 97.2% respectively) using inexpensive generic swabs. We found foam-tipped swabs provided higher DNA yields than cotton-tipped swabs. We further determined that omitting a drying step and storing swabs in Longmire buffer increased efficiency in the field while still yielding sufficient amounts of DNA for detailed population genetic studies using mitochondrial and nuclear markers. This new field protocol allows time- and cost-effective DNA sampling of juveniles or small-bodied birds for which drawing blood may cause excessive stress to birds and technicians alike.

Effects of planting pattern and density on growth indices, yield and yield component of corn (Zea mays in competition with redroot pigweed (Amaranthus retrofelexus(

Directory of Open Access Journals (Sweden)

alireza barkhi

2009-06-01

Full Text Available An experiment was conducted in 2002-2003 using split-split plot arrangement based on Rondomised Compelete Block Design with three replications at Feiz Abad Agricultural Research Station of Qazvin, in order to study of planting patterns and corn densitis effect in competition with redroot pigweed. Main plots inclouded two planting pattern of corn (P1: single row and P2: double row, sub plots inclouded two corn densities (D1:7 and D2:10 plant/m2 and sub sub plots inclouded 4 weed densities (C1:0, C2:2, C3:6, C4:12 plant/m2. Sampling conducted in 2-weekly intervals and growth indices evaluated. Results indicated that with increasing of weed density CGR, TDW, LAI, number of seeds in row, grain and ear yield decreased but plant height increased. Also LAI, CGR, TDW, number of weed seed and seed,s weight of weed increased. By increasing in corn density LAI, CGR, TDW, ear and grain yield increased, but length and diameter of ear and number of seeds in row decreased. Also LAI and CGR of weed increased, but TDW was decreased. In double row planting pattern just CGR, LAI, TDW of corn were higher significantly than single row planting pattern. But single row planting of weed caused higher LAI, NAR, RGR, CGR and TDW of weed in comparison with double row planting pattern. In 2-way interaction, double row planting pattern and zero densities and 2 weeds/m2 had highest grain yield respectively. There were no significant differences for 3-way interactions but double row planting pattern 10 plant density of corn/m2 zero weed/ m2 had highest grain yield.

YIELDING AND CONTENT OF SELECTED MICROELEMENTS IN MAIZE FERTILIZED WITH VARIOUS ORGANIC MATERIALS

Directory of Open Access Journals (Sweden)

Jerzy Wieczorek

2017-07-01

On the basis of conducted research it was found that various fertilizer combinations applied in the experiment had a significant influence on the test plant yielding. All compared fertilizer variants allowed maize to produce statistically significantly higher yield in comparison with the yield harvested from the unfertilized soils. Fertilization with sewage sludge I supplemented with mineral treatment and application of solely mineral salts proved the most beneficial for the maize yield. Applied fertilizer combinations affected the content of microelements. The highest concentrations of nickel in maize green mass were assessed in plant samples from the unfertilized object, whereas zinc and copper from mineral fertilization variant. Except of zinc, introducing additional metal doses did not influence their increased content in plant organs. Soil enrichment with zinc contained in sewage sludge I and II (respectively 77.4 mg and 49.9 mg ∙ pot-1 contributed to its elevated concentration in maize roots but at the same time this metal content statistically significantly decreased in maize shoots in comparison with the amounts determined in plants fertilized with mineral materials.

Bioactive compounds, antioxidant and binding activities and spear yield of Asparagus officinalis L.

Science.gov (United States)

Lee, Jong Won; Lee, Jeong Hyun; Yu, In Ho; Gorinstein, Shela; Bae, Jong Hyang; Ku, Yang Gyu

2014-06-01

The aim of this investigation was to find a proper harvesting period and establishing fern number, which effects the spear yield, bioactive compounds and antioxidant activities of Asparagus officinalis L. Spears were harvested at 2, 4, and 6 weeks after sprouting. Control for comparison was used without harvest. Spears and total yield increased with prolonged spear harvest period. In harvest of 6 weeks long optimum spear yield was the highest and fern numbers were 5 ~ 8. Bioactive compounds (polyphenols, flavonoids, flavanols, tannins and ascorbic acid) and the levels of antioxidant activities by ferric-reducing/antioxidant power (FRAP) and cupric reducing antioxidant capacity (CUPRAC) assays in asparagus ethanol extracts significantly differed in the investigated samples and were the highest at 6 weeks harvest period (P asparagus were studied by the interaction of polyphenol ethanol extracts with HSA, using 3D- FL. In conclusion, antioxidant status (bioactive compounds, binding and antioxidant activities) improved with the harvesting period and the first segment from spear tip. Appropriate harvesting is effective for higher asparagus yield and its bioactivity.

Effect of Limited Drip Irrigation Regime on Yield and Yield Components of Sesame under Mediterranean Conditions

Directory of Open Access Journals (Sweden)

Panayiota PAPASTYLIANOU

2017-05-01

Full Text Available Sesame is one of the most important oilseed crops in the world. Irrigation is of great importance to sesame production due to its positive effect on growth parameters. Although sesame has good drought tolerance compared with many other crops, it is particularly susceptible to drought damage during the seedling, flowering and seed filling stages and this can lead to yield loss. The aim of this study was to determine the response of sesame landraces to different irrigation applications during the 2015 growing season. The experiment was set up as a split plot design with three replicates, four main plots (irrigation treatments, designated as 100%, 75% 50% and 0 of the daily crop evapotranspiration and two sub-plots (sesame landraces, Limnos and Evros. Different characteristics such as plant height, number of seeds per capsule, and number of capsules per plant, seed yield, 1000-seed weight and % capsules without seeds, were recorded. The results indicated that all traits except 1000-seed weight were significantly affected by irrigation regimes. Plant height, shattering losses and number of capsules per plant decreased with increasing water shortage. Seed yield and number of seeds per capsule were less affected by irrigation level and showed higher values in the 50% of the daily crop evapotranspiration treatment. Limnos produced higher seed yield and number of seeds per capsule under all irrigation regimes. Evros showed higher plant height and shattering losses than Limnos. The results of this study suggest that sesame landraces can use water efficiently, are locally adapted and associated with traditional farming systems.

Comparison of Endotoxin Exposure Assessment by Bioaerosol Impinger and Filter-Sampling Methods

OpenAIRE

Duchaine, Caroline; Thorne, Peter S.; Mériaux, Anne; Grimard, Yan; Whitten, Paul; Cormier, Yvon

2001-01-01

Environmental assessment data collected in two prior occupational hygiene studies of swine barns and sawmills allowed the comparison of concurrent, triplicate, side-by-side endotoxin measurements using air sampling filters and bioaerosol impingers. Endotoxin concentrations in impinger solutions and filter eluates were assayed using the Limulus amebocyte lysate assay. In sawmills, impinger sampling yielded significantly higher endotoxin concentration measurements and lower variances than filte...

Two sampling methods yield distinct microbial signatures in the nasopharynges of asthmatic children.

Science.gov (United States)

Pérez-Losada, Marcos; Crandall, Keith A; Freishtat, Robert J

2016-06-16

The nasopharynx is a reservoir for pathogens associated with respiratory illnesses, such as asthma. Next-generation sequencing (NGS) has been used to characterize the nasopharyngeal microbiome during health and disease. Most studies so far have surveyed the nasopharynx as a whole; however, less is known about spatial variation (biogeography) in nasal microenvironments and how sampling techniques may capture that microbial diversity. We used targeted 16S rRNA MiSeq sequencing and two different sampling strategies [nasal washes (NW) and nasal brushes (NB)] to characterize the nasopharyngeal microbiota in 30 asthmatic children. Nasal brushing is more abrasive than nasal washing and targeted the inner portion of the inferior turbinate. This region is expected to be different from other nasal microenvironments. Nasal washing is not spatially specific. Our 30 × 2 nasal microbiomes generated 1,474,497 sequences, from which we identified an average of 157 and 186 OTUs per sample in the NW and NB groups, respectively. Microbiotas from NB showed significantly higher alpha-diversity than microbiotas from NW. Similarly, both nasal microbiotas were distinct from each other (PCoA) and significantly differed in their community composition and abundance in at least 9 genera (effective size ≥1 %). Nasopharyngeal microenvironments in asthmatic children contain microbiotas with different diversity and structure. Nasal washes and brushes capture that diversity differently. Future microbial studies of the nasopharynx need to be aware of potential spatial variation (biogeography).

Yield and dimensional quality of sawnwood in Guantanamo

Directory of Open Access Journals (Sweden)

Ibian Leyva Miguel

2017-12-01

Full Text Available The paper was carried out in the mobile sawmills LT 40 Yammar and Pekín of the Integral Military Farm Disembark by Duaba and the fixed sawmill of Cayo Güin branded Armentía of the Baracoa Agroforestry Company between the months of November of the 2014 to December of 2015 with the aim of improving the yield and dimensional quality of the lumber of Pinus cubensis Griseb. With this as main objective, the quality of the raw material used (long, thick, conicity, ovality, eccentricity and curvature of the shaft was analyzed. The yield was through a representative sampling of 132 logs distributed in the different sawmills and for dimensional quality, 100 pieces. As result, was observed that the raw material used was homogeneous in the diameter of the logs and the defect of the wood in the three sawmills, but in the Cayo Güín site, the logs were of greater dimensions. The Yammar and Perkin sawmills have an average yield of 70% higher than the one obtained in Cayo Güin where the result was of 55.5%. Mobile sawmills have greater dimensional control of sawn timber due to lower variation of the total process, Nonetheless, is accurate to state that the sawing system in the Cayo Güin establishment is out of control.

Effect of Mycorrhizal Fungus (Glomus spp on Wheat (Triticumaestivum Yield and Yield Components with Regard to Irrigation Water Quality

Directory of Open Access Journals (Sweden)

S Habibi

2016-02-01

Full Text Available Introduction Decrease in water quality affected by salinization of the water resources due to the drought is one of the limiting factors of plant production. Using mycorrhizal fungi is an important approach to deal with damaging effects during stress conditions. The symbiosis of arbuscular mycorrhiza (AM with the host plant and hence, the production of a very extensive network of hypha, enhances nutrient acquisition and improves water uptake in the host plant. The specialized network of hypha raises the uptake and translocation of nutrients to the plant, whereas it inhibits high uptake of Na and Cl and their transport to plant shoots compared with plant roots. Hence, AM can alleviate the stress of salinity on plant growth and increases their tolerance to the stresses. Materials and Methods In order to evaluate the influence of mycorrhizal fungi on yield and yield components of wheat, a greenhouse experiment was conducted in research farm of Shahid Chamran Ahvaz University. Experimental design was a randomized complete block design arranged in split factorial with three replications. The factors were water salinity (water quality including filtered water (EC ≥ 1 dS m-1, tap water (EC = 1/7-3 ds m-1, tap water plus NaCl and filtered water plus NaCl (EC = 8 ds m-1. Soil sterilization included sterilized and non-sterilized soil and mycorrhizal inoculation were in five levels (non-inoculated, inoculated with ‌Glomusmosseae, G. intraradices, G. geosporum and mixture of them. Yield and yield components were measured at crop maturity and colonization percentage of root was determined at flowering stage. Root colonization by AM was determined through preparing root samples at 1 g in each experimental unit, and roots were stained using the Gridline- Intersect Method. The harvest index and mycorrhizal dependency were also measured. Salinity levels determined approximate the threshold of wheat –tolerate- salinity before the results would rather

Search for B {yields} K{ell}{sup +}{ell}{sup -} and B {yields} K*(892){ell}{sup +}{ell}{sup -}

Energy Technology Data Exchange (ETDEWEB)

Aubert, B.

2004-02-12

The authors present preliminary results from a search for the flavor-changing neutral current decays B {yields} K{ell}{sup +}{ell}{sup -} and B {yields} K*(892){ell}{sup +}{ell}{sup -} using a sample of 22.7 x 10{sup 6} {Upsilon}(4S) {yields} B{bar B} decays collected with the BABAR detector at the PEP-II B Factory. They have reconstructed the following final states: B{sup +} {yields} K{sup +}{ell}{sup +}{ell}{sup -}, B{sup 0} {yields} K{sup 0}{ell}{sup +}{ell}{sup -} (K{sub s}{sup 0} {yields} {pi}{sup +} {pi}{sup -}), B{sup +} {yields} K*{sup +}{ell}{sup +}{ell}{sup -} (K*{sup +} {yields} K{sub s}{sup 0}{pi}{sup +}), and B{sup 0} {yields} K*{sup 0}{ell}{sup +}{ell}{sup -} (K*{sup 0} {yields} K{sup +}{pi}{sup -}), where {ell}{sup +}{ell}{sup -} is either an e{sup +}e{sup -} or {mu}{sup +}{mu}{sup -} pair. They obtain the 90% C.L. upper limits {Beta}(B {yields} K{ell}{sup +}{ell}{sup -}) < 0.6 x 10{sup -6} and {Beta}(B {yields} K*{ell}{sup +}{ell}{sup -}) < 2.5 x 10{sup -6}, close to the Standard Model predictions for these branching fractions.

Analysis of B{yields}K{sup *}{sub J}({yields}K{pi}){mu}{sup +}{mu}{sup -} in the higher kaon resonance region

Energy Technology Data Exchange (ETDEWEB)

Lue, Cai-Dian [Institute of High Energy Physics, Beijing, BJ (China); Wang, Wei [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2011-11-15

We study the resonant contributions in the process anti B{sup 0} {yields} K{sup -} {pi}{sup +}{mu}{sup +}{mu}{sup -} with the K{sup -}{pi}{sup +} invariant mass square m{sup 2}{sub K{pi}} element of [1, 5] GeV{sup 2}. Width effects of the involved strange mesons, K{sup *}(1410), K{sup *}{sub 0}(1430), K{sup *}{sub 2}(1430), K{sup *}(1680), K{sup *}{sub 3}(1780) and K{sup *}{sub 4}(2045), are incorporated. In terms of the helicity amplitudes, we derive a compact form for the full angular distributions, through which the branching ratios, forward-backward asymmetries and polarizations are attained. We propose that the uncertainties in the B {yields} K{sup *}{sub J} form factors can be pinned down by the measurements of a set of SU(3)-related processes. Using results from the large energy limit, we derive the dependence of branching fractions on the m{sub K{pi}}, and find that the K{sup *}{sub 2} resonance has a clear signature, in particular, in the transverse polarizations. (orig.)

Fluence-dependent sputtering yield of micro-architectured materials

Energy Technology Data Exchange (ETDEWEB)

Matthes, Christopher S.R.; Ghoniem, Nasr M., E-mail: ghoniem@ucla.edu; Li, Gary Z.; Matlock, Taylor S.; Goebel, Dan M.; Dodson, Chris A.; Wirz, Richard E.

2017-06-15

Highlights: • Sputtering yield is shown to be transient and heavily dependent on surface architecture. • Fabricated nano- and Microstructures cause geometric re-trapping of sputtered material, which leads to a self-healing mechanism. • Initially, the sputtering yield of micro-architectured Mo is approximately 1/2 the value as that of a planar surface. • The study demonstrates that the sputtering yield is a dynamic property, dependent on the surface structure of a material. • A developed phenomenological model mathematically describes the transient behavior of the sputtering yield as a function of plasma fluence. - Abstract: We present an experimental examination of the relationship between the surface morphology of Mo and its instantaneous sputtering rate as function of low-energy plasma ion fluence. We quantify the dynamic evolution of nano/micro features of surfaces with built-in architecture, and the corresponding variation in the sputtering yield. Ballistic deposition of sputtered atoms as a result of geometric re-trapping is observed, and re-growth of surface layers is confirmed. This provides a self-healing mechanism of micro-architectured surfaces during plasma exposure. A variety of material characterization techniques are used to show that the sputtering yield is not a fundamental property, but that it is quantitatively related to the initial surface architecture and to its subsequent evolution. The sputtering yield of textured molybdenum samples exposed to 300 eV Ar plasma is roughly 1/2 of the corresponding value for flat samples, and increases with ion fluence. Mo samples exhibited a sputtering yield initially as low as 0.22 ± 5%, converging to 0.4 ± 5% at high fluence. The sputtering yield exhibits a transient behavior as function of the integrated ion fluence, reaching a steady-state value that is independent of initial surface conditions. A phenomenological model is proposed to explain the observed transient sputtering phenomenon, and to

Measurements of beryllium sputtering yields at JET

Science.gov (United States)

Jet-Efda Contributors Stamp, M. F.; Krieger, K.; Brezinsek, S.

2011-08-01

The lifetime of the beryllium first wall in ITER will depend on erosion and redeposition processes. The physical sputtering yields for beryllium (both deuterium on beryllium (Be) and Be on Be) are of crucial importance since they drive the erosion process. Literature values of experimental sputtering yields show an order of magnitude variation so predictive modelling of ITER wall lifetimes has large uncertainty. We have reviewed the old beryllium yield experiments on JET and used current beryllium atomic data to produce revised beryllium sputtering yields. These experimental measurements have been compared with a simple physical sputtering model based on TRIM.SP beryllium yield data. Fair agreement is seen for beryllium yields from a clean beryllium limiter. However the yield on a beryllium divertor tile (with C/Be co-deposits) shows poor agreement at low electron temperatures indicating that the effect of the higher sputtering threshold for beryllium carbide is important.

Effect of sowing dates on yield and yield components on mutant-cum-hybrid lines of bread wheat

International Nuclear Information System (INIS)

Sial, M.A.; Arain, M.A.; Dahot, M.U.; Laghari, K.A.; Naqvi, M.H.; Markhand, G.S.; Mangrio, S.M.; Mirbahar, A.A.

2010-01-01

Twenty-one stable wheat mutant lines along with four check varieties viz., Sarsabz, Kiran-95, T.J.83 and Khirman were evaluated under normal and late sowing dates. The observations were recorded on phenological, morphological and meteorological parameters. Higher yield and improvement in various yield components were recorded at normal sowing as compared to late sowing. Six mutant lines showed superiority in yield than check varieties at normal sowings while three mutants produced more yield than check varieties except Sarsabz at late sowings. At normal sowing eleven mutant lines matured earlier than all check varieties including short duration variety T.J-83 whereas two mutant lines were earlier than Sarsabz and Kiran-95 and thirteen than T.J-83 and Khirman. (author)

Cigarettes, lung cancer, and coronary heart disease: the effects of inhalation and tar yield.

Science.gov (United States)

Higenbottam, T; Shipley, M J; Rose, G

1982-06-01

Ten-year mortality rates for lung cancer and coronary heart disease have been related to cigarette smoking habits in 17 475 male civil servants aged 40-64 and in sample of 8089 male British residents aged 35-69. Both diseases were more frequent in smokers. Lung cancer rates were higher overall for "non-inhalers", particularly in heavy smokers. Tar yield correlated with the risk of lung cancer in non-inhalers but less so in inhalers. Conversely, coronary deaths were more common among inhalers, and the effect of tar/nicotine yield (such as it was) was confined to inhalers. It appears that there are subtle interactions between the amount smoked, the tar/nicotine yield of the cigarette, and the style of smoking. Thus the effects of a change in cigarette characteristics are hard to predict, and they may be different for respiratory and cardiovascular disease.

Season of birth is associated with first-lactation milk yield in Holstein Friesian cattle.

Science.gov (United States)

Van Eetvelde, M; Kamal, M M; Vandaele, L; Opsomer, G

2017-12-01

The aim of the present research was to assess factors associated with first-lactation milk yield in dairy heifers, including maternal and environmental factors, factors related to the development of the heifer and factors related to its offspring such as gender of the calf. In addition, the potential underlying mechanism, in particular metabolic adaptations, was further explored. Data on body growth, reproduction and milk yield of 74 Holstein Friesian heifers on three herds in Flanders (Belgium) were collected. At birth, body measurements of the heifers were recorded and blood samples were taken (in order) to determine basal glucose and insulin concentrations. Body measurements were assessed every 3 months until first calving, and gender and weight of their first calf were recorded. Information on fertility and milk yield of the heifer and its dam were collected from the herd databases. Daily temperature and photoperiod were recorded from the database of the Belgian Royal Meteorological Institute. Linear mixed models were run with herd as a random factor, to account for differences in herd management. Heifers grew 867±80.7 g/day during their first year of life and were inseminated at 14.8±1.34 months. First calving took place at 24.5±1.93 months, at a weight of 642±61.5 kg and heifers produced 8506±1064 kg energy corrected milk during their first 305-day lactation. Regression models revealed that none of the maternal factors such as milk yield and parity, nor the growth of the heifer during the 1st year of life were associated with milk yield during first lactation. Age, and to a lesser extent BW at first parturition were positively associated with first-lactation milk yield. In addition, the season of birth, but not calving, had a significant influence on milk yield, with winter-born heifers producing less than heifers born in any other season. The lower yielding winter-born heifers had higher insulin concentrations at birth, whereas glucose concentrations

Predicting paddlefish roe yields using an extension of the Beverton–Holt equilibrium yield-per-recruit model

Science.gov (United States)

Colvin, M.E.; Bettoli, Phillip William; Scholten, G.D.

2013-01-01

Equilibrium yield models predict the total biomass removed from an exploited stock; however, traditional yield models must be modified to simulate roe yields because a linear relationship between age (or length) and mature ovary weight does not typically exist. We extended the traditional Beverton-Holt equilibrium yield model to predict roe yields of Paddlefish Polyodon spathula in Kentucky Lake, Tennessee-Kentucky, as a function of varying conditional fishing mortality rates (10-70%), conditional natural mortality rates (cm; 9% and 18%), and four minimum size limits ranging from 864 to 1,016mm eye-to-fork length. These results were then compared to a biomass-based yield assessment. Analysis of roe yields indicated the potential for growth overfishing at lower exploitation rates and smaller minimum length limits than were suggested by the biomass-based assessment. Patterns of biomass and roe yields in relation to exploitation rates were similar regardless of the simulated value of cm, thus indicating that the results were insensitive to changes in cm. Our results also suggested that higher minimum length limits would increase roe yield and reduce the potential for growth overfishing and recruitment overfishing at the simulated cm values. Biomass-based equilibrium yield assessments are commonly used to assess the effects of harvest on other caviar-based fisheries; however, our analysis demonstrates that such assessments likely underestimate the probability and severity of growth overfishing when roe is targeted. Therefore, equilibrium roe yield-per-recruit models should also be considered to guide the management process for caviar-producing fish species.

Effect of the Yield Stress and r-value Distribution on the Earing Profile of Cup Drawing with Yld2000-2d Yield Function

Science.gov (United States)

Lou, Yanshan; Bae, Gihyun; Lee, Changsoo; Huh, Hoon

2010-06-01

This paper deals with the effect of the yield stress and r-value distribution on the earing in the cup drawing. The anisotropic yield function, Yld2000-2d yield function, is selected to describe the anisotropy of two metal sheets, 719B and AA5182-O. The tool dimension is referred from the Benchmark problem of NUMISHEET'2002. The Downhill Simplex method is applied to identify the anisotropic coefficients in Yld2000-2d yield function. Simulations of the drawing process are performed to investigate the earing profile of two materials. The earing profiles obtained from simulations are compared with the analytical model developed by Hosford and Caddell. Simulations are conducted with respect to the change of the yield stress and r-value distribution, respectively. The correlation between the anisotropy and the earing tendency is investigated based on simulation data. Finally, the earing mechanism is analyzed through the deformation process of the blank during the cup deep drawing. It can be concluded that ears locate at angular positions with lower yield stress and higher r-value while the valleys appear at the angular position with higher yield stress and lower r-value. The effect of the yield stress distribution is more important for the cup height distribution than that of the r-value distribution.

Sampling designs and methods for estimating fish-impingement losses at cooling-water intakes

International Nuclear Information System (INIS)

Murarka, I.P.; Bodeau, D.J.

1977-01-01

Several systems for estimating fish impingement at power plant cooling-water intakes are compared to determine the most statistically efficient sampling designs and methods. Compared to a simple random sampling scheme the stratified systematic random sampling scheme, the systematic random sampling scheme, and the stratified random sampling scheme yield higher efficiencies and better estimators for the parameters in two models of fish impingement as a time-series process. Mathematical results and illustrative examples of the applications of the sampling schemes to simulated and real data are given. Some sampling designs applicable to fish-impingement studies are presented in appendixes

Effect of nitrogen and water deficit type on the yield gap between the potential and attainable wheat yield

Directory of Open Access Journals (Sweden)

Jiangang Liu

2015-12-01

Full Text Available Water deficit and N fertilizer are the two primary limiting factors for wheat yield in the North China plain, the most important winter wheat (Triticum aestivum L. production area in China. Analyzing the yield gap between the potential yield and the attainable yield can quantify the potential for increasing wheat production and exploring the limiting factors to yield gap in the high-yielding farming region of North China Plain. The Decision Support System for Agrotechnology Transfer (DSSAT model was used to identify methods to increase the grain yield and decrease the gap. In order to explore the impact of N and cultivars on wheat yield in the different drought types, the climate conditions during 1981 to 2011 growing seasons was categorized into low, moderate, and severe water deficit classes according to the anomaly percentage of the water deficit rate during the entire wheat growing season. There are differences (P < 0.0001 in the variations of the potential yields among three cultivars over 30 yr. For all three water deficit types, the more recent cultivars Jimai22 and Shijiazhuang8 had higher yields compared to the older 'Jinan17'. As the N fertilizer rate increased, the yield gap decreased more substantially during the low water deficit years because of the significant increase in attainable yield. Overall, the yield gaps were smaller with less water stress. Replacement of cultivars and appropriate N fertilizer application based on the forecasted drought types can narrow the yield gap effectively.

Path Analysis of Grain Yield and Yield Components and Some Agronomic Traits in Bread Wheat

Directory of Open Access Journals (Sweden)

Mohsen Janmohammadi

2014-01-01

Full Text Available Development of new bread wheat cultivars needs efficient tools to monitor trait association in a breeding program. This investigation was aimed to characterize grain yield components and some agronomic traits related to bread wheat grain yield. The efficiency of a breeding program depends mainly on the direction of the correlation between different traits and the relative importance of each component involved in contributing to grain yield. Correlation and path analysis were carried out in 56 bread wheat genotypes grown under field conditions of Maragheh, Iran. Observations were recorded on 18 wheat traits and correlation coefficient analysis revealed grain yield was positively correlated with stem diameter, spike length, floret number, spikelet number, grain diameter, grain length and 1000 seed weight traits. According to the variance inflation factor (VIF and tolerance as multicollinearity statistics, there are inconsistent relationships among the variables and all traits could be considered as first-order variables (Model I with grain yield as the response variable due to low multicollinearity of all measured traits. In the path coefficient analysis, grain yield represented the dependent variable and the spikelet number and 1000 seed weight traits were the independent ones. Our results indicated that the number of spikelets per spikes and leaf width and 1000 seed weight traits followed by the grain length, grain diameter and grain number per spike were the traits related to higher grain yield. The above mentioned traits along with their indirect causal factors should be considered simultaneously as an effective selection criteria evolving high yielding genotype because of their direct positive contribution to grain yield.

Assessment of Above- and Below-ground Competition between Sesame (Sesamume indicum L. and Pigweed (Amaranthus retroflexus and Its Effects on Sesame Yield and Yield Components

Directory of Open Access Journals (Sweden)

A.J Yanegh

2013-08-01

Full Text Available This study carried out in a factorial layout on completely randomaized block design with three replications, to evaluate the above- and below- ground competition between sesame (Sesamum indicum and pigweed (Amaranthus retroflexus, and their impacts on sesame yield and yield component. The experimental treatments were all combination of crop-weed competition (shoot competition, root competition and root-shoot competition and sesame plant densitys (1, 2 and 4 plant per pot. Plants were sown in plastic pots (24 cm diameter and 28 cm height in year 2010, at feild of Ferdowsi University of Mashhad. For study the shoot competition of sesame-pigweed, the roots were separated by plastic when the pots were filled with soil before sowing the seeds. Three weeks after emerging, shoots of plants were separated vertical barrier (30 x 70 cm for studing root competition. Results showed that competition treatments had a significant effect on seed weight per plant and yield components except 1000 seed weight. Among competition produced higher yield and yield components compared to othere treatments. However, sesame and pigweed biological weight in root-shoot competition was 2.6 and 13.7 respectively, that was higher than other competition treatments and was significant. Capsule number in main and sub branches, capsule number in plant, seed number in capsule and seed number in plant in complete competition treatment was 15, 2.58, 17.5, 43.7 and 693.89 respectively, that was higher than other treatments and differences among them was significant. Sesame density also had a significant effect on seed weight per plant and yield components. When low density were used (one plant, yield and yield components was more, therefore in one plant per pot density biological weight of sesame was 3.82 gr, and in higher densities the mentioned traits decreased significantly.

Quantitative reconstruction of PIXE-tomography data for thin samples using GUPIX X-ray emission yields

Energy Technology Data Exchange (ETDEWEB)

Michelet, C., E-mail: michelet@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Barberet, Ph., E-mail: barberet@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Devès, G., E-mail: deves@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Bouguelmouna, B., E-mail: bbouguel@gmail.com [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Bourret, S., E-mail: bourret@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Delville, M.-H., E-mail: delville@icmcb-bordeaux.cnrs.fr [Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB, UPR9048) CNRS, Université de Bordeaux, 87 avenue du Dr. A. Schweitzer, Pessac F-33608 (France); Le Trequesser, Q., E-mail: letreque@cenbg.in2p3.fr [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB, UPR9048) CNRS, Université de Bordeaux, 87 avenue du Dr. A. Schweitzer, Pessac F-33608 (France); Gordillo, N., E-mail: nuri.gordillo@gmail.com [Univ. Bordeaux, CENBG, UMR 5797, F-33170 Gradignan (France); CNRS, IN2P3, CENBG, UMR 5797, F-33170 Gradignan (France); Beasley, D.G., E-mail: d.beasley@ucl.ac.uk [Center of Medical Imaging Computing (CMIC), Department of Medical Physics & Bioengineering, University College London, Gower Street, London WC1E 6BT (United Kingdom); and others

2015-04-01

We present here a new development of the TomoRebuild software package, to perform quantitative Particle Induced X-ray Emission Tomography (PIXET) reconstruction. X-ray yields are obtained from the GUPIX code. The GUPIX data base is available for protons up to 5 MeV and also in the 20–100 MeV energy range, deuterons up to 6 MeV, {sup 3}He and alphas up to 12 MeV. In this version, X-ray yields are calculated for thin samples, i.e. without simulating X-ray attenuation. PIXET data reconstruction is kept as long as possible independent from Scanning Transmission Ion Microscopy Tomography (STIMT). In this way, the local mass distribution (in g/cm{sup 3}) of each X-ray emitting element is reconstructed in all voxels of the analyzed volume, only from PIXET data, without the need of associated STIMT data. Only the very last step of data analysis requires STIMT data, in order to normalize PIXET data to obtain concentration distributions, in terms of normalized mass fractions (in μg/g). For this, a noise correction procedure has been designed in ImageJ. Moreover sinogram or image misalignment can be corrected, as well as the difference in beam size between the two experiments. The main features of the TomoRebuild code, user friendly design and modular C++ implementation, were kept. The software package is portable and can run on Windows and Linux operating systems. An optional user-friendly graphic interface was designed in Java, as a plugin for the ImageJ graphic software package. Reconstruction examples are presented from biological specimens of Caenorhabditis elegans – a small nematode constituting a reference model for biology studies. The reconstruction results are compared between the different codes TomoRebuild, DISRA and JPIXET, and different reconstruction methods: Filtered BackProjection (FBP) and Maximum Likelihood Expectation Maximization (MLEM)

Changes in tar yields and cigarette design in samples of Chinese cigarettes, 2009 and 2012.

Science.gov (United States)

Schneller, Liane M; Zwierzchowski, Benjamin A; Caruso, Rosalie V; Li, Qiang; Yuan, Jiang; Fong, Geoffrey T; O'Connor, Richard J

2015-11-01

China is home to the greatest number of smokers as well as the greatest number of smoking-related deaths. An active and growing market of cigarettes marketed as 'light' or 'low tar' may keep health-concerned smokers from quitting, wrongly believing that such brands are less harmful. This study sought to observe changes in cigarette design characteristics and reported tar, nicotine and carbon monoxide (TNCO) levels in a sample of cigarette brands obtained in seven Chinese cities from 2009 to 2012. Cigarettes were purchased and shipped to Roswell Park Cancer Institute, where 91 pairs of packs were selected for physical cigarette design characteristic testing and recording of TNCO values. Data analysis was conducted using SPSS, and was initially characterised using descriptive statistics, correlations and generalised estimating equations to observe changes in brand varieties over time. Reported TNCO values on packs saw mean tar, nicotine and CO levels decrease from 2009 to 2012 by 7.9%, 4.5% and 6.0%, respectively. Ventilation was the only cigarette design feature that significantly changed over time (p<0.001), with an increase of 31.7%. Significant predictors of tar and CO yield overall were ventilation and per-cigarette tobacco weight, while for nicotine tobacco moisture was also an independent predictor of yield. The use of ventilation to decrease TNCO emissions is misleading smokers to believe that they are smoking a 'light/low' tar cigarette that is healthier, and is potentially forestalling the quitting behaviours that would begin to reduce the health burden of tobacco in China, and so should be prohibited. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

AMT1;1 transgenic rice plants with enhanced NH4(+) permeability show superior growth and higher yield under optimal and suboptimal NH4(+) conditions.

Science.gov (United States)

Ranathunge, Kosala; El-Kereamy, Ashraf; Gidda, Satinder; Bi, Yong-Mei; Rothstein, Steven J

2014-03-01

The major source of nitrogen for rice (Oryza sativa L.) is ammonium (NH4(+)). The NH4(+) uptake of roots is mainly governed by membrane transporters, with OsAMT1;1 being a prominent member of the OsAMT1 gene family that is known to be involved in NH4(+) transport in rice plants. However, little is known about its involvement in NH4(+) uptake in rice roots and subsequent effects on NH4(+) assimilation. This study shows that OsAMT1;1 is a constitutively expressed, nitrogen-responsive gene, and its protein product is localized in the plasma membrane. Its expression level is under the control of circadian rhythm. Transgenic rice lines (L-2 and L-3) overexpressing the OsAMT1;1 gene had the same root structure as the wild type (WT). However, they had 2-fold greater NH4(+) permeability than the WT, whereas OsAMT1;1 gene expression was 20-fold higher than in the WT. Analogous to the expression, transgenic lines had a higher NH4(+) content in the shoots and roots than the WT. Direct NH4(+) fluxes in the xylem showed that the transgenic lines had significantly greater uptake rates than the WT. Higher NH4(+) contents also promoted higher expression levels of genes in the nitrogen assimilation pathway, resulting in greater nitrogen assimilates, chlorophyll, starch, sugars, and grain yield in transgenic lines than in the WT under suboptimal and optimal nitrogen conditions. OsAMT1;1 also enhanced overall plant growth, especially under suboptimal NH4(+) levels. These results suggest that OsAMT1;1 has the potential for improving nitrogen use efficiency, plant growth, and grain yield under both suboptimal and optimal nitrogen fertilizer conditions.

AMT1;1 transgenic rice plants with enhanced NH4 + permeability show superior growth and higher yield under optimal and suboptimal NH4 + conditions

Science.gov (United States)

Rothstein, Steven J.

2014-01-01

The major source of nitrogen for rice (Oryza sativa L.) is ammonium (NH4 +). The NH4 + uptake of roots is mainly governed by membrane transporters, with OsAMT1;1 being a prominent member of the OsAMT1 gene family that is known to be involved in NH4 + transport in rice plants. However, little is known about its involvement in NH4 + uptake in rice roots and subsequent effects on NH4 + assimilation. This study shows that OsAMT1;1 is a constitutively expressed, nitrogen-responsive gene, and its protein product is localized in the plasma membrane. Its expression level is under the control of circadian rhythm. Transgenic rice lines (L-2 and L-3) overexpressing the OsAMT1;1 gene had the same root structure as the wild type (WT). However, they had 2-fold greater NH4 + permeability than the WT, whereas OsAMT1;1 gene expression was 20-fold higher than in the WT. Analogous to the expression, transgenic lines had a higher NH4 + content in the shoots and roots than the WT. Direct NH4 + fluxes in the xylem showed that the transgenic lines had significantly greater uptake rates than the WT. Higher NH4 + contents also promoted higher expression levels of genes in the nitrogen assimilation pathway, resulting in greater nitrogen assimilates, chlorophyll, starch, sugars, and grain yield in transgenic lines than in the WT under suboptimal and optimal nitrogen conditions. OsAMT1;1 also enhanced overall plant growth, especially under suboptimal NH4 + levels. These results suggest that OsAMT1;1 has the potential for improving nitrogen use efficiency, plant growth, and grain yield under both suboptimal and optimal nitrogen fertilizer conditions. PMID:24420570

Human blood RNA stabilization in samples collected and transported for a large biobank

Science.gov (United States)

2012-01-01

Background The Norwegian Mother and Child Cohort Study (MoBa) is a nation-wide population-based pregnancy cohort initiated in 1999, comprising more than 108.000 pregnancies recruited between 1999 and 2008. In this study we evaluated the feasibility of integrating RNA analyses into existing MoBa protocols. We compared two different blood RNA collection tube systems – the PAXgene™ Blood RNA system and the Tempus™ Blood RNA system - and assessed the effects of suboptimal blood volumes in collection tubes and of transportation of blood samples by standard mail. Endpoints to characterize the samples were RNA quality and yield, and the RNA transcript stability of selected genes. Findings High-quality RNA could be extracted from blood samples stabilized with both PAXgene and Tempus tubes. The RNA yields obtained from the blood samples collected in Tempus tubes were consistently higher than from PAXgene tubes. Higher RNA yields were obtained from cord blood (3 – 4 times) compared to adult blood with both types of tubes. Transportation of samples by standard mail had moderate effects on RNA quality and RNA transcript stability; the overall RNA quality of the transported samples was high. Some unexplained changes in gene expression were noted, which seemed to correlate with suboptimal blood volumes collected in the tubes. Temperature variations during transportation may also be of some importance. Conclusions Our results strongly suggest that special collection tubes are necessary for RNA stabilization and they should be used for establishing new biobanks. We also show that the 50,000 samples collected in the MoBa biobank provide RNA of high quality and in sufficient amounts to allow gene expression analyses for studying the association of disease with altered patterns of gene expression. PMID:22988904

Performance of a procedure for yield estimation in fruit orchards

DEFF Research Database (Denmark)

Aravena Zamora, Felipe; Potin, Camila; Wulfsohn, Dvora-Laio

Early estimation of expected fruit tree yield is important for the market planning and for growers and exporters to plan for labour and boxes. Large variations in tree yield may be found, posing a challenge for accurate yield estimation. We evaluated a multilevel systematic sampling procedure...

Evaluating differential nuclear DNA yield rates and osteocyte numbers among human bone tissue types: A synchrotron radiation micro-CT approach.

Science.gov (United States)

Andronowski, Janna M; Mundorff, Amy Z; Pratt, Isaac V; Davoren, Jon M; Cooper, David M L

2017-05-01

Molecular human identification has conventionally focused on DNA sampling from dense, weight-bearing cortical bone tissue, typically from femora or tibiae. A comparison of skeletal elements from three contemporary individuals demonstrated that elements with high quantities of cancellous bone yielded nuclear DNA at the highest rates, suggesting that preferentially sampling cortical bone may be suboptimal (Mundorff & Davoren, 2014). Despite these findings, the reason for the differential DNA yields between cortical and cancellous bone tissues remains unknown. The primary goal of this work is to ascertain whether differences in bone microstructure can be used to explain differential nuclear DNA yield among bone tissue types observed by Mundorff and Davoren (2014), with a focus on osteocytes and the three-dimensional (3D) quantification of their associated lacunae. Osteocytes and other bone cells are recognized to house DNA in bone tissue, thus examining the density of their lacunae may explain why nuclear DNA yield rates differ among bone tissue types. Lacunae were visualized and quantified using synchrotron radiation-based micro-Computed Tomographic imaging (SR micro-CT). Volumes of interest (VOIs) from cortical and cancellous bone tissues (n=129) were comparatively analyzed from the three skeletons sampled for Mundorff and Davoren's (2014) study. Analyses tested the primary hypothesis that the abundance and density of osteocytes (inferred from their lacunar spaces) vary between cortical and cancellous bone tissue types. Results demonstrated that osteocyte lacunar abundance and density vary between cortical and cancellous bone tissue types, with cortical bone VOIs containing a higher lacunar abundance and density. We found that the osteocyte lacunar density values are independent of nuclear DNA yield, suggesting an alternative explanation for the higher nuclear DNA yields from bones with greater quantities of cancellous bone tissue. The use of SR micro-CT allowed for

Comparison of biomolecule desorption yields for low and high energy primary ions

International Nuclear Information System (INIS)

Kamensky, I.; Hakansson, P.; Sundqvist, B.; McNeal, C.J.; MacFarlane, R.

1982-01-01

Ion induced desorption yields of molecular ions from samples of cesium iodide, glycylglycine, ergosterol, bleomycin and a trinucleoside diphosphate have been studied using primary beams of 54 MeV 63 Cu 9+ and 3 keV 133 Cs + . Mass analysis was performed with a time-of-flight technique. Each sample was studied with the same spectrometer for both low and high energy primary ions and without opening of the vacuum chamber in between the measurements. The results show that fast heavy ions give larger yields for all samples studied and that the yield ratios for high to low energy desorption increase with the mass of the sample molecule. (orig.)

Evaluation of Yield and Yield Components of Some Pinto bean (Phaseolus vulgaris L. Genotypes under Late Season Water Deficit Conditions

Directory of Open Access Journals (Sweden)

somayyeh soheili movahhed

2017-10-01

Full Text Available Introduction Drought or water deficit stress is the most important environmental factor which has severe negative impacts on crop yields, especially when the water stress occurs in the flowering stage. Iran is located in arid and semi-arid areas, therefore, attention to the effects of water deficit stress in different stages of plants growth seems necessary. Bean (Phaseolus vulgaris L. is one of the most important legumes that has a major contribution to human diet and provides an important part of the human protein. According to studies, cultivation areas of legumes in Iran are about 97300 hectares and its total production is about 208350 tons of grain. Bean is a fast-growing plant (Tran and Singh, 2002, thus soil water must be sufficiently available to ensure its desirable growth and yield. The aim of this study was to investigate the effect of drought stress on yield and yield components of some pinto bean (Phaseolus vulgaris L. cultivated in Zanjan province. Materials and methods An experiment was conducted as spilt plot based on randomized complete block design with four replications in Zanjan university research farm. Irrigation levels (control and drought stress and genotypes (Local khomein, Sadri, Ks21193 and Ks21189 were set in the main and subplot, respectively. Water deficit stress was applied during flowering stage (50% of the plants were at anthesis. Sampling was performed to measure yield and yield components at the end of the growth period and final maturity. In this experiment number of pod per Plant, numberof grain per pod, 100 grain weight, grain yield, biological yield and harvest index were measured. Results and Discussion In this experiment it was observed that drought stress, genotype and interact irrigation×genotyps were significantly for all traits except biological yield. Drought stress reduced number of pod perplant, number of grain per pod, 100 grain weight, grain yield, biological yield and Harvest Index. Results

FAKTOR YANG MEMPENGARUHI RISIKO KREDIT DAN YIELD OBLIGASI PADA PERUSAHAAN PERBANKAN

Directory of Open Access Journals (Sweden)

Asih Widajati

2017-03-01

Full Text Available Investing in bonds was preferred by investors with the reason that the bonds offer the returns that arepositive with fixed income so that more bond guarantee from the stock. Investors choose the bonds withrank considered (rating of bonds and bond return (expressed in yield. This study aimed to analyze theinfluence. corporate governance of credit risk, the influence of corporate governance on bond yield, theeffect of credit risk on the bond yield. The used data was secondary data. The research population was banksthat issue bonds from 2008 to 2010. Sampling was done by using purposive sampling technique so thatthere were 7 banks that meet the condition sets in the sample. Tests analysis used path analysis. The resultsshowed that corporate governance the effect to credit risk and yield bonds. The results showed that bondwas the choice of investors to invest.

Alteration in sample preparation to increase the yield of multiplex Polymerase Chain Reaction assay for diagnosis of genital ulcer disease

Directory of Open Access Journals (Sweden)

G Rao

2013-01-01

Full Text Available Purpose: Genital Ulcer Disease (GUD is common sexually transmitted infection (STI. Multiple studies have shown that GUDs are strongly associated with the transmission and the acquisition of HIV infection. An accurate diagnosis of common etiology of GUD namely Herpes, syphilis and Chancroid is possible using Multiplex PCR (M-PCR. However, frequent presence of Polymerase Chain Reaction inhibitors in the ulcer swab specimen limits the performance of the assay. In order to overcome this problem, alternative specimen preparation method was used. Materials and Methods: To determine the common etiology, GUD specimens obtained under an STI operations research study were tested with M-PCR after the samples were prepared using Roche Amplicor specimen preparation kit. PCR inhibiting samples were identified from that, which showed negative results. These samples were subjected to phenol-chloroform extraction and ethanol precipitation before the conduct of M-PCR on them. Results: Of the 237 GUD specimens tested, in 145 etiologies could be detected, whereas 92 samples were found negative. Further spiking with one of the target DNA, 128 of the negative samples were found to contain the inhibitors. These 126 samples were then subjected to phenol chloroform extraction and ethanol precipitation followed by M-PCR. Using this method for sample preparation, etiology could be determined in 46 (23% additional samples. This success rate of altered sample preparation method has been lower than that has reported. Conclusion: The results indicate that sample preparation using phenol chloroform extraction and ethanol precipitation, prior to M-PCR helps to eliminate the inhibitors and increase the yield of the assay. However, being a laborious procedure, it may be used for samples giving negative results after the screening by Roche Amplicor specimen preparation kit.

The Effect of Crop Residue and Different NPK Fertilizer Rates on yield Components and Yield of Wheat

Directory of Open Access Journals (Sweden)

fatemeh khamadi

2017-08-01

Full Text Available Introduction Integrated nutrient management involving crop residue/green manures and chemical fertilizer is potential alternative to provide a balanced supply of nutrients, enhance soil quality and thereby sustain higher productivity. The present experiment was undertaken to evaluate the effect of different crop residue management practices and NPK levels on yield components and yield of wheat. Materials and methods Field experiments were conducted during 2012-2014 at department of agronomy, Chamran University. Experiment was laid out in a randomized block designs in split plot arrangement. With three replications. Crop residues were assigned to main plot consistent CR1: wheat residue; CR2: rape residue; CR3: barley residue; CR4: barley residue + vetch; CR5: wheat straw + mungbean; CR6: vetch residue; CR7: mungbean residue; CR8: No residue incorporation as main plot and three NPK fertilizer rates: F1: (180N-120P-100K kg.ha-1; F2: (140N-90P-80K kg.ha-1; F3: (90N-60P-40K kg.ha-1 as sub plots. Twelve hills were collected at physiological maturity for measuring yield components from surrounding area of grain yield harvest area. Yield components, viz. number of spike per m2, seed per spike, 1000- grain weight, plant height were measured. Grain and straw yields were recorded from the central 5 m2 grain yield harvest area of each treatment and harvest index was calculated. Data were subjected to analysis by SAS and mean companions were performed using the Duncan multiple range test producer. Also, graphs were drawn in Excel software. Results and discussion The result of analysis variance showed significant difference between crop residues for evaluated traits. The result indicated that the highest biological and grain yield was obtained when wheat treated with CR5: wheat straw + mungbean (green manure and CR4: barley straw + vetch (green manure. Biological and grain yield increased 31 and 26% respectively by CR5 comparing with control. The highest

Quantitative Genetic Analysis for Yield and Yield Components in Boro Rice (Oryza sativa L.

Directory of Open Access Journals (Sweden)

Supriyo CHAKRABORTY

2010-03-01

Full Text Available Twenty-nine genotypes of boro rice (Oryza sativa L. were grown in a randomized block design with three replications in plots of 4m x 1m with a crop geometry of 20 cm x 20 cm between November-April, in Regional Agricultural Research Station, Nagaon, India. Quantitative data were collected on five randomly selected plants of each genotype per replication for yield/plant, and six other yield components, namely plant height, panicles/plant, panicle length, effective grains/panicle, 100 grain weight and harvest index. Mean values of the characters for each genotype were used for analysis of variance and covariance to obtain information on genotypic and phenotypic correlation along with coheritability between two characters. Path analyses were carried out to estimate the direct and indirect effects of boro rice�s yield components. The objective of the study was to identify the characters that mostly influence the yield for increasing boro rice productivity through breeding program. Correlation analysis revealed significant positive genotypic correlation of yield/plant with plant height (0.21, panicles/plant (0.53, panicle length (0.53, effective grains/panicle (0.57 and harvest index (0.86. Path analysis based on genotypic correlation coefficients elucidated high positive direct effect of harvest index (0.8631, panicle length (0.2560 and 100 grain weight (0.1632 on yield/plant with a residual effect of 0.33. Plant height and panicles/plant recorded high positive indirect effect on yield/plant via harvest index whereas effective grains/panicle on yield/plant via harvest index and panicle length. Results of the present study suggested that five component characters, namely harvest index, effective grains/plant, panicle length, panicles/plant and plant height influenced the yield of boro rice. A genotype with higher magnitude of these component characters could be either selected from the existing genotypes or evolved by breeding program for genetic

{sup 5}D{sub 3}{yields}{sup 7}F{sub J} emission of Tb doped sol-gel silica

Energy Technology Data Exchange (ETDEWEB)

Seed Ahmed, H.A.A.; Ntwaeaborwa, O.M.; Gusowski, M.A. [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa); Botha, J.R. [Department of Physics, Nelson Mandela Metropolitan University, Box 77000, Port Elizabeth 6031 (South Africa); Kroon, R.E., E-mail: KroonRE@ufs.ac.za [Department of Physics, University of the Free State, IB51, Box 339, Bloemfontein 9300 (South Africa)

2012-05-15

Amorphous silica samples doped with 0.1 and 1 mol% of terbium (Tb) were synthesized by the sol-gel method. In addition to the green light associated with {sup 5}D{sub 4}{yields}{sup 7}F{sub J} transitions of Tb{sup 3+}, the sample containing 0.1 mol% also emitted blue light as a result of {sup 5}D{sub 3}{yields}{sup 7}F{sub J} transitions during photoluminescence (PL) measurements. As a result of concentration quenching this blue emission was not observed for the samples doped with the higher concentration (1 mol%). However the blue {sup 5}D{sub 3} {yields}{sup 7}F{sub J} emission was observed in the 1 mol% doped samples during cathodoluminescence (CL) measurements. Since a rough calculation indicated that the excitation rate in the CL system where the blue emission is observed may be similar to a laser PL system under conditions where the blue emission is not observed, the difference is attributed to the nature of the excitation sources. It is suggested that during the CL excitation incident electrons can reduce non-luminescent Tb{sup 4+} ions in the silica, substituting for Si{sup 4+} ions, to the excited (Tb{sup 3+}) Low-Asterisk state and that these are responsible for the blue emission, which does not occur during PL excitation.

Effects of some biostimulators on yield and seed viability of linseed

Directory of Open Access Journals (Sweden)

Jevđović Radosav

2012-01-01

Full Text Available The impact of the application of some biostimulators on the yield and quality of linseed oil on humogley and chernozem. Tested fl ax cultivar Mira was produced in the Institute for Medicinal Plant Research ‘Dr Josif Pančić’ from Belgrade. EPIN EKSTRA and CIRKON were applied as biostimulators. The seed yield, germination energy (GE and total germination (TG were investigated. The higher average yield was achieved on the chernozem type of soil. A variant with the application of EPIN EKSTRA biostimulator gave the highest yield on both soil types. A variant with the application of CIRKON biostimulator gave slightly higher yield than the control, on both soil types. The highest germination energy and total germination were achieved in the variant with the application biostimulator EPIN EKSTRA.

Yields of hydrogen peroxide from the reaction of hydroxyl radical with organic compounds in solution and ice

Directory of Open Access Journals (Sweden)

T. Hullar

2011-07-01

Full Text Available Hydrogen peroxide (HOOH is a significant oxidant in atmospheric condensed phases (e.g., cloud and fog drops, aqueous particles, and snow that also photolyzes to form hydroxyl radical (^•OH. ^•OH can react with organics in aqueous phases to form organic peroxyl radicals and ultimately reform HOOH, but the efficiency of this process in atmospheric aqueous phases, as well as snow and ice, is not well understood. We investigate HOOH formation from ^•OH attack on 10 environmentally relevant organic compounds: formaldehyde, formate, glycine, phenylalanine, benzoic acid, octanol, octanal, octanoic acid, octanedioic acid, and 2-butoxyethanol. Liquid and ice samples with and without nitrate (as an ^•OH source were illuminated using simulated solar light, and HOOH formation rates were measured as a function of pH and temperature. For most compounds, the formation rate of HOOH without nitrate was the same as the background formation rate in blank water (i.e., illumination of the organic species does not produce HOOH directly, while formation rates with nitrate were greater than the water control (i.e., reaction of ^•OH with the organic species forms HOOH. Yields of HOOH, defined as the rate of HOOH production divided by the rate of ^•OH production, ranged from essentially zero (glycine to 0.24 (octanal, with an average of 0.12 ± 0.05 (95 % CI. HOOH production rates and yields were higher at lower pH values. There was no temperature dependence of the HOOH yield for formaldehyde or octanedioic acid between −5 to 20 °C and ice samples had approximately the same HOOH yield as the aqueous solutions. In contrast, HOOH yields in formate solutions were higher at 5 and 10 °C compared to −5 and 20 °C. Yields of HOOH in ice for solutions containing nitrate and either phenylalanine, benzoate, octanal, or octanoic acid were indistinguishable from zero. Our HOOH yields were approximately

Dynamic and rate-dependent yielding behavior of Co{sub 0.9}Ni{sub 0.1} microcluster based magnetorheological fluids

Energy Technology Data Exchange (ETDEWEB)

Arief, Injamamul; Mukhopadhyay, P.K., E-mail: pkm@bose.res.in

2016-01-01

In this paper we performed steady shear and oscillatory magnetorheological (MR) studies in magnetic fluids containing CoNi sub-micron sized clusters of 450 nm in diameter. Such Co-rich nanoclusters were synthesized by conventional homogeneous nucleation without any external surfactant or reducing agent in liquid polyol at elevated temperature. The x-ray diffraction, energy dispersive x-ray analysis, scanning and transmission electron microscopy studies were done for analyzing the sample composition and morphology. Two variants of fluid samples were prepared by dispersing 15 vol% and 20 vol% of CoNi powders in castor oil. Room temperature steady magnetoshear studies indicate viscoplastic behavior with stronger dependence of static yield stress on magnetization than a dipolar coupling that was operational in the dynamic yield stress. Magnetosweep measurements at constant shear rate showed interesting viscous relaxation at high magnetic fields. We also explored dynamical elastic behavior through oscillatory magnetorheological studies under both strain sweep and frequency sweep modes, and showed glass transition like phenomenon occurring in them above critical shear amplitudes. - Highlights: • A typical polymer/surfactant free polyol reduction method was used to synthesize large-scale Co{sub 0.9}Ni{sub 0.1} nanoclusters. • Room temperature rate-dependent magnetorheology of CoNi-nanoclusters based MR fluids revealed viscoplastic behavior. • Magnetic fields were replaced by powder particle magnetization (M) for better yield stress scaling. • In addition to previously reported M{sup 2}-dependence, higher order relations (~M{sup 3}) were also noted for static yield stress. • An interesting viscous relaxation phenomenon occurred at higher magnetic fields.

Impact of broiler processing scalding and chilling profiles on carcass and breast meat yield.

Science.gov (United States)

Buhr, R J; Walker, J M; Bourassa, D V; Caudill, A B; Kiepper, B H; Zhuang, H

2014-06-01

The effect of scalding and chilling procedures was evaluated on carcass and breast meat weight and yield in broilers. On 4 separate weeks (trials), broilers were subjected to feed withdrawal, weighed, and then stunned and bled in 4 sequential batches (n = 16 broilers/batch, 64 broilers/trial). In addition, breast skin was collected before scalding, after scalding, and after defeathering for proximate analysis. Each batch of 16 carcasses was subjected to either hard (60.0°C for 1.5 min) or soft (52.8°C for 3 min) immersion scalding. Following defeathering and evisceration, 8 carcasses/batch were air-chilled (0.5°C, 120 min, 86% RH) and 8 carcasses/batch were immersion water-chilled (water and ice 0.5°C, 40 min). Carcasses were reweighed individually following evisceration and following chilling. Breast meat was removed from the carcass and weighed within 4 h postmortem. There were significant (P defeathered eviscerated weights did not differ between the scalding and chilling treatments. During air-chilling all carcasses lost weight, resulting in postchill carcass yield of 73.0% for soft-scalded and 71.3% for hard-scalded carcasses, a difference of 1.7%. During water-chilling all carcasses gained weight, resulting in heavier postchill carcass weights (2,031 g) than for air-chilled carcasses (1,899 g). Postchill carcass yields were correspondingly higher for water-chilled carcasses, 78.2% for soft-scalded and 76.1% for hard-scalded carcasses, a difference of 2.1%. Only in trials 1 and 4 was breast meat yield significantly lower for hard-scalded, air-chilled carcasses (16.1 and 17.5%) than the other treatments. Proximate analysis of skin sampled after scalding or defeathering did not differ significantly in moisture (P = 0.2530) or lipid (P = 0.6412) content compared with skin sampled before scalding. Skin protein content was significantly higher (P defeathering. The hard-scalding method used in this experiment did not result in increased skin lipid loss either

Nut crop yield records show that budbreak-based chilling requirements may not reflect yield decline chill thresholds

Science.gov (United States)

Pope, Katherine S.; Dose, Volker; Da Silva, David; Brown, Patrick H.; DeJong, Theodore M.

2015-06-01

Warming winters due to climate change may critically affect temperate tree species. Insufficiently cold winters are thought to result in fewer viable flower buds and the subsequent development of fewer fruits or nuts, decreasing the yield of an orchard or fecundity of a species. The best existing approximation for a threshold of sufficient cold accumulation, the "chilling requirement" of a species or variety, has been quantified by manipulating or modeling the conditions that result in dormant bud breaking. However, the physiological processes that affect budbreak are not the same as those that determine yield. This study sought to test whether budbreak-based chilling thresholds can reasonably approximate the thresholds that affect yield, particularly regarding the potential impacts of climate change on temperate tree crop yields. County-wide yield records for almond ( Prunus dulcis), pistachio ( Pistacia vera), and walnut ( Juglans regia) in the Central Valley of California were compared with 50 years of weather records. Bayesian nonparametric function estimation was used to model yield potentials at varying amounts of chill accumulation. In almonds, average yields occurred when chill accumulation was close to the budbreak-based chilling requirement. However, in the other two crops, pistachios and walnuts, the best previous estimate of the budbreak-based chilling requirements was 19-32 % higher than the chilling accumulations associated with average or above average yields. This research indicates that physiological processes beyond requirements for budbreak should be considered when estimating chill accumulation thresholds of yield decline and potential impacts of climate change.

Nutrient Partitioning and Stoichiometry in Unburnt Sugarcane Ratoon at Varying Yield Levels

Directory of Open Access Journals (Sweden)

José Marcos Leite

2016-04-01

Full Text Available Unraveling nutrient imbalances in contemporary agriculture is a research priority to improve whenever possible yield and nutrient use efficiency in sugarcane (Saccharum spp. systems while minimizing the costs of cultivation (e.g., use of fertilizers and environmental concerns. The main goal of this study was therefore to investigate biomass and nutrient [nitrogen (N, phosphorus (P, and potassium (K] content, partitioning, stoichiometry and internal efficiencies in sugarcane ratoon at varying yield levels. Three sites were established on highly weathered tropical soils located in the Southeast region of Brazil. At all sites, seasonal biomass and nutrient uptake patterns were synthesized from four sampling times taken throughout the sugarcane ratoon season. At all sites, in-season nutrient partitioning (in diverse plant components, internal efficiencies (yield to nutrient content ratio and nutrient ratios (N:P and N:K were determined at harvesting. Sugarcane exhibited three distinct phases of plant growth, as follows: lag, exponential-linear, and stationary. Across sites, nutrient requirement per unit of yield was 1.4 kg N, 0.24 kg P, and 2.7 kg K per Mg of stalk produced, but nutrient removal varied with soil nutrient status (based on soil plus fertilizer nutrient supply and crop demand (potential yield. Dry leaves had lower nutrient content (N, P, and K and broader N:P and N:K ratios when compared with tops and stalks plant fractions. Greater sugarcane yield and narrowed N:P ratio (6:1 were verified for tops of sugarcane when increasing both N and P content. High-yielding sugarcane systems were related to higher nutrient content and more balanced N:P (6:1 and N:K (0.5:1 ratios.

[Study on High-yield Cultivation Measures for Arctii Fructus].

Science.gov (United States)

Liu, Shi-yong; Jiang, Xiao-bo; Wang, Tao; Sun, Ji-ye; Hu, Shang-qin; Zhang, Li

2015-02-01

To find out the high yield cultivation measures for Arctii Fructus. Completely randomized block experiment design method was used in the field planting, to analyze the effect of different cultivation way on agronomic characters, phenological phase,quality and quantity of Arctii Fructus. Arctium lappa planted on August 28 had the best results of plant height, thousand seeds weight and yield. The highest yield of Arctii Fructus was got at the density of 1,482 plants/667 m2. Arctiin content was in an increase trend with the planting time delay and planting density increasing. The plant height, thousand seeds weight, yield and arctiin content by split application of fertilizer were significantly higher than that by one-time fertilization. Compared with open field Arctium lappa, plant height, yield, arctiin content and relative water content of plastic film mulching Arctium lappa was higher by 7.74%, 10.87%, 6.38% and 24.20%, respectively. In the topping Arctium lappa, the yield was increased by 11.09%, with 39. 89% less branching number. Early planting time and topping shortened the growth cycle of Arctium lappa plant. The high-yield cultivation measures of Arctii Fructus are: around August 28 to sowing, planting density of 1 482 plants/667 m2, split application of fertilizer for four times, covering film on surface of the soil and topping in bolting.

Biogas and Methane Yield from Rye Grass

Directory of Open Access Journals (Sweden)

Tomáš Vítěz

2015-01-01

Full Text Available Biogas production in the Czech Republic has expanded substantially, including marginal regions for maize cultivation. Therefore, there are increasingly sought materials that could partially replace maize silage, as a basic feedstock, while secure both biogas production and its quality.Two samples of rye grass (Lolium multiflorum var. westerwoldicum silage with different solids content 21% and 15% were measured for biogas and methane yield. Rye grass silage with solid content of 15% reached an average specific biogas yield 0.431 m3·kg−1 of organic dry matter and an average specific methane yield 0.249 m3·kg−1 of organic dry matter. Rye grass silage with solid content 21% reached an average specific biogas yield 0.654 m3·kg−1 of organic dry matter and an average specific methane yield 0.399 m3·kg−1 of organic dry matter.

A higher yielding mutant of black gram with improved nodule formation

International Nuclear Information System (INIS)

Singh, R.K.; Raghuvanshi, S.S.

1987-01-01

Dry seeds of black gram (Vigna mungo (L) Hopper) var. T 9 with 12.2% moisture content were irradiated at 10, 20 and 30 krad of gamma rays. This was followed by combined treatment of one set in each dose with freshly prepared 0. 25% EMS in phosphate buffer at 7.0 pH at 30± deg. C for 6 hours. In M 2 population of 20 krad two mutants with pentafoliate instead of trifoliate leaves were found. This character was true breeding in M 3 M 6 generation. Crosses revealed monogenic recessive inheritance of this character. The proposed gene symbol is p5. This mutant has normal maturity period and the plant height is the same as T 9 (ca. 50 cm). Preliminary yield trials indicate superiority of the mutant line over control. The mutant line also shows a significant improvement in number and weight of root nodules, potentially improving green manuring value. Improvement of root nodulation in mungbean mutants was reported before by others

How taxonomic diversity, community structure, and sample size determine the reliability of higher taxon surrogates.

Science.gov (United States)

Neeson, Thomas M; Van Rijn, Itai; Mandelik, Yael

2013-07-01

Ecologists and paleontologists often rely on higher taxon surrogates instead of complete inventories of biological diversity. Despite their intrinsic appeal, the performance of these surrogates has been markedly inconsistent across empirical studies, to the extent that there is no consensus on appropriate taxonomic resolution (i.e., whether genus- or family-level categories are more appropriate) or their overall usefulness. A framework linking the reliability of higher taxon surrogates to biogeographic setting would allow for the interpretation of previously published work and provide some needed guidance regarding the actual application of these surrogates in biodiversity assessments, conservation planning, and the interpretation of the fossil record. We developed a mathematical model to show how taxonomic diversity, community structure, and sampling effort together affect three measures of higher taxon performance: the correlation between species and higher taxon richness, the relative shapes and asymptotes of species and higher taxon accumulation curves, and the efficiency of higher taxa in a complementarity-based reserve-selection algorithm. In our model, higher taxon surrogates performed well in communities in which a few common species were most abundant, and less well in communities with many equally abundant species. Furthermore, higher taxon surrogates performed well when there was a small mean and variance in the number of species per higher taxa. We also show that empirically measured species-higher-taxon correlations can be partly spurious (i.e., a mathematical artifact), except when the species accumulation curve has reached an asymptote. This particular result is of considerable practical interest given the widespread use of rapid survey methods in biodiversity assessment and the application of higher taxon methods to taxa in which species accumulation curves rarely reach an asymptote, e.g., insects.

The effect of urea with urease inhibitors and urea on yield and nitrate content in potato tubers

Directory of Open Access Journals (Sweden)

Karel Drápal

2013-01-01

Full Text Available The three-year field trial was established on two localities – Žabčice and Valečov in 2010–2012. Seven variants of nitrogen fertilization in four replications have been involved in this experiment – 100% of urea (U, 80% of urea, 60% of urea, 100% of UreaStabil (US, 80% of UreaStabil and 60% of UreaStabil, whilst 100% corresponded to 90 kg N.ha−1 after subtracting the content of Nmin in the soil, and the control variant without fertilization by mineral nitrogen. The two varieties with different lengths of vegetation periods have been chosen for the experiment – the early variety Karin and the mid-early variety Red Anna. In all cases, samples for the yield and qualitative analyses have been taken according to the phenological phase – the beginning of physiological maturity. The obtained results show that the highest average yield has been achieved in the variant of 100% of urea – 40.95 t. ha−1, the yield of this variant was statistically significantly higher than the yield of the other variants of fertilization (P < 0.05. Variants treated by urea without the urease inhibitor reached an average yield of 37.62 t.ha−1. However, this yield was not statistically significantly higher when comparing to the urea with the urease inhibitor (P > 0.05. In regard to localities, a relatively high average yield (44.58 t.ha−1 has been achieved on a characteristically potato-growing locality Valečov. This yield was statistically significantly higher than the one attained on the Žabčice locality (P < 0.05. In respect to varieties, the mid-early variety Red Anna attained a higher average yield (39.65 t. ha−1. Likewise, this yield was statistically significantly higher than the one of the early variety Karin (P < 0.05. The best year was 2012, in which the average yield of 38.73 t.ha−1 was achieved. This yield was statistically significantly higher than the yield of the year 2010 (P < 0.05. As far as nitrates are concerned, the

Tensile strength/yield strength (TS/YS) ratios of high-strength steel (HSS) reinforcing bars

Science.gov (United States)

Tavio, Anggraini, Retno; Raka, I. Gede Putu; Agustiar

2018-05-01

The building codes such as American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013 require that the ratio of tensile strength (TS) and yield strength (YS) should not less than 1.25. The requirement is based on the assumption that a capability of a structural member to develop inelastic rotation capacity is a function of the length of the yield region. This paper reports an investigation on various steel grades, namely Grades 420, 550, 650, and 700 MPa, to examine the impact of different TS/YS ratios if it is less or greater than the required value. Grades 550, 650, and 700 MPa were purposely selected with the intention to examine if these higher grades are still promising to be implemented in special structural systems since they are prohibited by the building codes for longitudinal reinforcement, whereas Grade 420 MPa bars are the maximum limit of yield strength of reinforcing bars that is allowable for longitudinal reinforcement of special structural systems. Tensile tests of these steel samples were conducted under displacement controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. From the study, it can be concluded that Grade 420 performed higher TS/YS ratios and they were able to reach up to more than 1.25. However, the High Strength Still (HSS) bars (Grades 550, 600, and 700 MPa) resulted in lower TS/YS ratios (less than 1.25) compared with those of Grade 420 MPa.

Comparison of breeding methods for forage yield in red clover

Directory of Open Access Journals (Sweden)

Libor Jalůvka

2009-01-01

Full Text Available Three methods of red clover (Trifolium pratense L. breeding for forage yield in two harvest years on locations in Bredelokke (Denmark, Hladké Životice (Czech Republic and Les Alleuds (France were compared. Three types of 46 candivars1, developed by A recurrent selection in subsequent generations (37 candivars, divided into early and late group, B polycross progenies (4 candivars and C ge­no-phe­no­ty­pic selection (5 candivars were compared. The trials were sown in 2005 and cut three times in 2006 and 2007; their evaluation is based primarily on total yield of dry matter. The candivars developed by polycross and geno-phenotypic selections gave significantly higher yields than candivars from the recurrent selection. However, the candivars developed by the methods B and C did not differ significantly. The candivars developed by these progressive methods were suitable for higher yielding and drier environment in Hladké Životice (where was the highest yield level even if averaged annual precipitation were lower by 73 and 113 mm in comparison to other locations, respectively; here was ave­ra­ge yield higher by 19 and 13% for B and C in comparison to A method. Highly significant interaction of the candivars with locations was found. It can be concluded that varieties specifically aimed to different locations by the methods B and C should be bred; also the parental entries should be selected there.

Yield gap analysis in long-term experiments with intensive rice cultivation

International Nuclear Information System (INIS)

Laureles, E.V.; Correa, T. Jr.; Buresh, R.J.

2007-01-01

The long-term continuous cropping experiment at IRRI is cultivated with three rice crops in a year, making it the world's most intensively cropped long-term rice experiment. The availability of comprehensive rice production records, compiled weather data, and tested crop models provides a means to evaluate long-term trends in measured and potential yields and yield gaps in this rice production system. Yield trends were assessed using the highest yielding cultivar in each cropping season from 1979 to 2005. Potential yield of the highest yielding cultivar in each season was determined using three rice models (ORYZA, TERM, and CERES) run with the actual transplanting and harvest dates for the cultivar. The yield gap was determined from the difference between the simulated potential grain yield and the measured grain yield. Measured and potential yields and the yield gap varied across seasons and years. Measured yields were higher in the dry season than in the early and late wet seasons. The yield gap tended to be higher in the wet season than in the dry season. Climatic parameters, particularly solar radiation, influenced the performance of rice cultivars. The relatively larger yield gaps in the late wet season than in the dry season were associated with increased spikelet sterility. The cumulative measured yield for the three annual rice crop was near 80 percent of the annual yield potential in years with best practices for fertilizer N and crop management. The long term trends suggest that effective timing and rates of N fertilization and effective control of diseases were critical in achieving 80 percent of the annual yield potential

High yield fabrication of fluorescent nanodiamonds

International Nuclear Information System (INIS)

Boudou, Jean-Paul; Curmi, Patrick A; Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf; Aubert, Pascal; Sennour, Mohamed; Thorel, Alain; Gaffet, Eric

2009-01-01

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

High yield fabrication of fluorescent nanodiamonds

Energy Technology Data Exchange (ETDEWEB)

Boudou, Jean-Paul; Curmi, Patrick A [Structure and Activity of Normal and Pathological Biomolecules-INSERM/UEVE U829, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Jelezko, Fedor; Wrachtrup, Joerg; Balasubramanian, Gopalakrischnan; Reuter, Rolf [3.Physikalisches Institut, University of Stuttgart, Pfaffenwaldring 57, D-70550 Stuttgart (Germany); Aubert, Pascal [Nanometric Media Laboratory, Universite d' Evry-Val d' Essonne, Batiment Maupertuis, Rue du pere Andre Jarlan, F-91025 Evry (France); Sennour, Mohamed; Thorel, Alain [Centre des Materiaux, Mines Paris, ParisTech, BP 87, F-91000 Evry (France); Gaffet, Eric [Nanomaterials Research Group-UMR 5060, CNRS, UTBM, Site de Sevenans, F-90010 Belfort (France)], E-mail: jpb.cnrs@free.fr, E-mail: pcurmi@univ-evry.fr, E-mail: f.jelezko@physik.uni-stuttgart.de

2009-06-10

A new fabrication method to produce homogeneously fluorescent nanodiamonds with high yields is described. The powder obtained by high energy ball milling of fluorescent high pressure, high temperature diamond microcrystals was converted in a pure concentrated aqueous colloidal dispersion of highly crystalline ultrasmall nanoparticles with a mean size less than or equal to 10 nm. The whole fabrication yield of colloidal quasi-spherical nanodiamonds was several orders of magnitude higher than those previously reported starting from microdiamonds. The results open up avenues for the industrial cost-effective production of fluorescent nanodiamonds with well-controlled properties.

Influence of gamma rays on the yield of Linum usitatissimum

International Nuclear Information System (INIS)

Ghouse, A.K.M.; Abidi, S.H.

1979-01-01

The impact of various acute doses of gamma-rays has been studied in an oil yielding Indian variety, Neelum of Linum usitatissimum. It has been found that gamma irradiation brings about an increase in the yield of the crop at lower doses upto 75 krads, while the higher ones like 125 and 150 krads reduce the yield to half. (auth.)

Accelerated yield learning in agressive lithography

Science.gov (United States)

Monahan, Kevin M.; Ashkenaz, Scott M.; Chen, Xing; Lord, Patrick J.; Merrill, Mark A.; Quattrini, Rich; Wiley, James N.

2000-06-01

As exposure wavelengths decrease from 248 nm to 193, 157, and even 13 nm (EUV), small process defects can cause collapse of the lithographic process window near the limits of resolution, particularly for the gate and contact structures in high- performance devices. Such sensitivity poses a challenge for lithography process module control. In this work, we show that yield loss can be caused by a combination of macro, micro, CD, and overlay defects. A defect is defined as any yield- affecting process variation. Each defect, regardless of cause, is assumed to have a specific 'kill potential.' The accuracy of the lithographic yield model can be improved by identifying those defects with the highest kill potential or, more importantly, those that pose the highest economic risk. Such economic considerations have led us to develop a simple heuristic model for understanding sampling strategies in defect metrology and for linking metrology capability to yield and profitability.

Supercritical fluid extraction of peach (Prunus persica) almond oil: process yield and extract composition.

Science.gov (United States)

Mezzomo, Natália; Mileo, Bruna R; Friedrich, Maria T; Martínez, Julian; Ferreira, Sandra R S

2010-07-01

Peach kernels are industrial residues from the peach processing, contain oil with important therapeutic properties and attractive nutritional aspects because of the high concentration of oleic and linoleic acids. The extraction method used to obtain natural compounds from raw matter is critical for product quality definition. Thus, the aim of this work was to compare peach almond extraction yields obtained by different procedures: soxhlet extractions (Sox) with different solvents; hydrodistillation (HD); ethanolic maceration (Mac) followed by fractionation with various solvents, and supercritical fluid extraction (SFE) at 30, 40 and 50 degrees C and at 100, 200 and 300bar, performed with pure CO(2) and with a co-solvent. The extracts were evaluated with respect to fatty acid composition (FAC), fractionated chemical profile (FCP) and total phenolic content (TPC). The Sox total yields were generally higher than those obtained by SFE. The crossover pressure for SFE was between 260 and 280bar. The FAC results show oleic and linoleic acids as main components, especially for Sox and SFE extracts. The FCP for samples obtained by Sox and Mac indicated the presence of benzaldehyde and benzyl alcohol, components responsible for almond flavor and with important industrial uses, whereas the SFE extracts present a high content of a possible flavonoid. The higher TPC values were obtained by Sox and Mac with ethanol. In general, the maximum pressure in SFE produced the highest yield, TPC and oleic acid content. The use of ethanol at 5% as co-solvent in SFE did not result in a significant effect on any evaluated parameter. The production of peach almond oil through all techniques is substantially adequate and SFE presented advantages, with respect to the quality of the extracts due to the high oleic acid content, as presented by some Sox samples. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Photogeneration of reactive transient species upon irradiation of natural water samples: Formation quantum yields in different spectral intervals, and implications for the photochemistry of surface waters.

Science.gov (United States)

Marchisio, Andrea; Minella, Marco; Maurino, Valter; Minero, Claudio; Vione, Davide

2015-04-15

Chromophoric dissolved organic matter (CDOM) in surface waters is a photochemical source of several transient species such as CDOM triplet states ((3)CDOM*), singlet oxygen ((1)O2) and the hydroxyl radical (OH). By irradiation of lake water samples, it is shown here that the quantum yields for the formation of these transients by CDOM vary depending on the irradiation wavelength range, in the order UVB > UVA > blue. A possible explanation is that radiation at longer wavelengths is preferentially absorbed by the larger CDOM fractions, which show lesser photoactivity compared to smaller CDOM moieties. The quantum yield variations in different spectral ranges were definitely more marked for (3)CDOM* and OH compared to (1)O2. The decrease of the quantum yields with increasing wavelength has important implications for the photochemistry of surface waters, because long-wavelength radiation penetrates deeper in water columns compared to short-wavelength radiation. The average steady-state concentrations of the transients ((3)CDOM*, (1)O2 and OH) were modelled in water columns of different depths, based on the experimentally determined wavelength trends of the formation quantum yields. Important differences were found between such modelling results and those obtained in a wavelength-independent quantum yield scenario. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biochar in vineyards: impact on soil quality and crop yield four years after the application

Science.gov (United States)

Ferreira, Carla; Verheijen, Frank; Puga, João; Keizer, Jacob; Ferreira, António

2017-04-01

Biochar is a recalcitrant organic carbon compound, created by biomass heating at high temperatures (300-1000°C) under low oxygen concentrations. Biochar application to agricultural soils has received increasing attention over the last years, due to its climate change mitigation and adaptation potential and reported improved soil properties and functions relevant to agronomic and environmental performance. Reported impacts are linked with increased cation exchange capacity, enhanced nutrient and water retention, and positive influences on soil microbial communities, which influence crop yields. Nevertheless, few studies have focused on mid-to-long term impacts of biochar application. This study investigated the impact of biochar on soil quality and crop yield four years after biochar application in a vineyard in North-Central Portugal. The site has a Mediterranean climate with a strong Atlantic Ocean influence, with mean annual rainfall and temperature of 1100 mm and 15°C, respectively. The soil is a relatively deep ( 80cm) sandy loam Cambisol, with gentle slopes (3°). The experimental design included three treatments: (i) control, without biochar; (ii) high biochar application rate (40 ton/ha); and (iii) biochar compost (40 ton/ha, 10% biochar). Three plots per treatment (2m×3m) were installed in March 2012, using a mini-rotavator (0-15cm depth). In May 2016, soil quality was also assessed through soil surveys and sampling. Penetration resistance was performed at the soil surface with a pocket penetrometer, and soil surface sampling rings were used for bulk density analyses (100 cm3). Bulked soil samples (0-30 cm) were collected in each plot for aggregate stability, microbial biomass (by chloroform fumigation extraction) and net mineralization rate (through photometric determination of non-incubated and incubated samples). Decomposition rate and litter stabilisation was assessed over a 3-month period through the Tea Bag Index (Keuskamp et al., 2013). The number

Yield and Yield Components of Vetch (Vigna radiata as Affected by the Use of Vermicompost and Phosphate Bio-fertilizer

Directory of Open Access Journals (Sweden)

Mohammad Mehdi Rahimi

2016-06-01

Full Text Available To evaluate the effects different levels of phosphate biofertilizer barvar-2 and vermi compost on yield and yield components of vetch plant (Vigna radiata L.in Yasouj a factorial experiments was performed in completely randomized design in crop year of 2013. Experimental treatments were phosphate biofertilizer barvar-2 at 3 levels (0, 50, 100 gram per hectare and vermicompost at 4 levels (0, 10, 20, 30 ton per hectare. In this study stem height, root length, biological yield, seed yield and harvest index was measured. ANOVA and comparison of means showed that vermicompost significantly increased stem height, economic and biological yields. Results, also, indicated that highest yield and biomass, 4.3 and 18.8 g/plant, observed respectively when 100 g/ha of barvar-2 and 30 t/ha of vermi compost were used. Using both of phosphate biofertilizer barvar-2 and vermicompost was better than their individnal usage. This indicates that combined use of these 2 factors would produce higher yield. It can be concluded that application of 100 g/ha of barvar-2 and 30 t/ha of vermicompost would a proper recommendation.

Effect of different tillage intensity on yields and yield-forming factors in winter wheat

Directory of Open Access Journals (Sweden)

Martin Houšť

2012-01-01

Full Text Available The paper presents results of a study on application of minimum tillage technologies when growing winter wheat. Experiments were performed in the sugar-beet-growing region with loamy chernozem within the period of 2005–2009. Aanalysed and evaluated were effects of different methods of soil processing on yield-forming factors in stands of winter wheat grown after three different preceding crops (i.e. alfalfa, maize for silage and pea. Evaluated were the following four variants of tillage: (1 conventional ploughing to the depth of 0.22 m (Variant 1; (2 ploughing to the depth of 0.15 m (Variant 2; (3 direct sowing into the untilled soil (Variant 3, and (4 shallow tillage to the depth of 0.10 m (Variant 4.The effect of different tillage intensity on winter wheat yields was statistically non-significant after all forecrops. After alfalfa, the highest and the lowest average yields were recorded in Variant 2 (i.e. with ploughing to the depth of 0.15 m and Variant 3 (direct sowing into the untilled soil, respectively. After maize grown for silage, higher yields were obtained in Variant 2 and Variant 1 (conventional ploughing while in Variants 4 and 3 the obtained yields were lower. When growing winter wheat after pea as a preceding crop, the highest and the lowest average yields were recorded after direct sowing (Variant 3 and in Variant 1 (i.e. ploughing to the depth of 0.22 m, respectively. Results of studies on effect of different tillage technologies on yields of winter wheat crops indicate that under the given pedological and climatic conditions it is possible to apply methods of reduced tillage intensity. However, the choice of the corresponding technology must be performed with regard to the type of preceding crop.

Accuracy of predicting milk yield from alternative recording schemes

NARCIS (Netherlands)

Berry, D.P.; Olori, V.E.; Cromie, A.R.; Rath, M.; Veerkamp, R.F.; Dilon, P.

2005-01-01

The effect of reducing the frequency of official milk recording and the number of recorded samples per test-day on the accuracy of predicting daily yield and cumulative 305-day yield was investigated. A control data set consisting of 58 210 primiparous cows with milk test-day records every 4 weeks

Using Worldview Satellite Imagery to Map Yield in Avocado (Persea americana: A Case Study in Bundaberg, Australia

Directory of Open Access Journals (Sweden)

Andrew Robson

2017-11-01

Full Text Available Accurate pre-harvest estimation of avocado (Persea americana cv. Haas yield offers a range of benefits to industry and growers. Currently there is no commercial yield monitor available for avocado tree crops and the manual count method used for yield forecasting can be highly inaccurate. Remote sensing using satellite imagery offers a potential means to achieve accurate pre-harvest yield forecasting. This study evaluated the accuracies of high resolution WorldView (WV 2 and 3 satellite imagery and targeted field sampling for the pre-harvest prediction of total fruit weight (kg·tree−1 and average fruit size (g and for mapping the spatial distribution of these yield parameters across the orchard block. WV 2 satellite imagery was acquired over two avocado orchards during 2014, and WV3 imagery was acquired in 2016 and 2017 over these same two orchards plus an additional three orchards. Sample trees representing high, medium and low vigour zones were selected from normalised difference vegetation index (NDVI derived from the WV images and sampled for total fruit weight (kg·tree−1 and average fruit size (g per tree. For each sample tree, spectral reflectance data was extracted from the eight band multispectral WV imagery and 18 vegetation indices (VIs derived. Principal component analysis (PCA and non-linear regression analysis was applied to each of the derived VIs to determine the index with the strongest relationship to the measured total fruit weight and average fruit size. For all trees measured over the three year period (2014, 2016, and 2017 a consistent positive relationship was identified between the VI using near infrared band one and the red edge band (RENDVI1 to both total fruit weight (kg·tree−1 (R2 = 0.45, 0.28, and 0.29 respectively and average fruit size (g (R2 = 0.56, 0.37, and 0.29 respectively across all orchard blocks. Separate analysis of each orchard block produced higher R2 values as well as identifying different

Effect of days in milk and milk yield on testing positive in milk antibody ELISA to Mycobacterium avium subsp. paratuberculosis in dairy cattle

DEFF Research Database (Denmark)

Nielsen, Søren Saxmose; Toft, Nils

2012-01-01

Milk samples are becoming more used as a diagnostic specimen for assessment of occurrence of antibodies to Mycobacterium avium subsp. paratuberculosis (MAP). This study assessed the effect of days in milk (DIM) and milk yield on testing positive in a commercial MAP specific milk antibody ELISA...... from the first couple of DIM should be excluded from MAP testing until further information on their significance is established. Milk yield also had a significant effect on odds of testing positive due to its diluting effect. Inclusion of milk yield in the interpretation of test results could improve...... among 222,774 Danish Holstein cows. Results showed that odds of testing positive on 1-2 DIM were 9-27 times higher than the rest of lactation, where the chance of testing positive varied less. The reason is most likely a high concentration of non-specific antibodies in colostrum. Consequently, samples...

Accelerated Solvent Extraction: An Innovative Sample Extraction Technique for Natural Products

International Nuclear Information System (INIS)

Hazlina Ahmad Hassali; Azfar Hanif Abd Aziz; Rosniza Razali

2015-01-01

Accelerated solvent extraction (ASE) is one of the novel techniques that have been developed for the extraction of phytochemicals from plants in order to shorten the extraction time, decrease the solvent consumption, increase the extraction yield and enhance the quality of extracts. This technique combines elevated temperatures and pressure with liquid solvents. This paper gives a brief overview of accelerated solvent extraction technique for sample preparation and its application to the extraction of natural products. Through practical examples, the effects of operational parameters such as temperature, volume of solvent used, extraction time and extraction yields on the performance of ASE are discussed. It is demonstrated that ASE technique allows reduced solvent consumption and shorter extraction time, while the extraction yields are even higher than those obtained with conventional methods. (author)

A Remote Sensing-Derived Corn Yield Assessment Model

Science.gov (United States)

Shrestha, Ranjay Man

Agricultural studies and food security have become critical research topics due to continuous growth in human population and simultaneous shrinkage in agricultural land. In spite of modern technological advancements to improve agricultural productivity, more studies on crop yield assessments and food productivities are still necessary to fulfill the constantly increasing food demands. Besides human activities, natural disasters such as flood and drought, along with rapid climate changes, also inflect an adverse effect on food productivities. Understanding the impact of these disasters on crop yield and making early impact estimations could help planning for any national or international food crisis. Similarly, the United States Department of Agriculture (USDA) Risk Management Agency (RMA) insurance management utilizes appropriately estimated crop yield and damage assessment information to sustain farmers' practice through timely and proper compensations. Through County Agricultural Production Survey (CAPS), the USDA National Agricultural Statistical Service (NASS) uses traditional methods of field interviews and farmer-reported survey data to perform annual crop condition monitoring and production estimations at the regional and state levels. As these manual approaches of yield estimations are highly inefficient and produce very limited samples to represent the entire area, NASS requires supplemental spatial data that provides continuous and timely information on crop production and annual yield. Compared to traditional methods, remote sensing data and products offer wider spatial extent, more accurate location information, higher temporal resolution and data distribution, and lower data cost--thus providing a complementary option for estimation of crop yield information. Remote sensing derived vegetation indices such as Normalized Difference Vegetation Index (NDVI) provide measurable statistics of potential crop growth based on the spectral reflectance and could

A combined simple bubbling method with high performance liquid chromatography purification strategy, higher radiochemical yield and purity and faster preparation of carbon-11-raclopride.

Science.gov (United States)

Huang, Huacheng; Ning, Yanli; Zhang, Bucheng; Lou, Cen

2015-01-01

Carbon-11-raclopride (¹¹C-R) is a positron-emitting radiotracer successfully used for the study of cognitive control and widely applied in PET imaging. A simple automated preparation of ¹¹C-R by using the reaction of carbon-(11)-methyl triflate (¹¹C-MeOTF) or ¹¹C-methyl iodide (¹¹C-MeI) with demethylraclopride is described. Specifically we used a simple setup applied an additional "U" reaction vessel for ¹¹C-MeOTf compared with ¹¹C-MeI and assessed the influence of several solvents and of the amount of the percussor for ¹¹C-methylation of demethylraclopride by the bubbling method. The reversal of retention order between product and its precursor has been achieved for ¹¹C-R, enabling collection of the purified ¹¹C-R by using the HPLC column after shorter retention time. By the improved radiosynthesis and purification strategy, ¹¹C-R could be prepared with higher radiochemical yield than that of the previous studies. The yield for ¹¹C-MeOTf was 76% and for ¹¹C-CH3I >26% and with better radiochemical purity (>99% based on both ¹¹C-MeOTf and ¹¹C-MeI) as compared to the previously obtained purity of ¹¹C-R using HPLC method with acetonitrile as a part of mobile phase. Furthermore, by using ethanol as the organic modifier, residual solvent analysis prior to human injection could be avoided and ¹¹C-R could be injected directly following simple dilution and sterile filtration. Improved radiosynthesis and HPLC purification in combination with ethanol containing eluent, extremely shortened the time for preparation of ¹¹C-R, gave a higher radiochemical yield and purity for ¹¹C-R and can be used for multiple and faster synthesis of ¹¹C-R and probably for other ¹¹C-labeled radiopharmaceuticals.

A higher yielding mutant of black gram with improved nodule formation

Energy Technology Data Exchange (ETDEWEB)

Singh, R K; Raghuvanshi, S S [Plant Genetic Unit, Department of Botany, University of Lucknow (India)

1987-07-01

Dry seeds of black gram (Vigna mungo (L) Hopper) var. T{sub 9} with 12.2% moisture content were irradiated at 10, 20 and 30 krad of gamma rays. This was followed by combined treatment of one set in each dose with freshly prepared 0. 25% EMS in phosphate buffer at 7.0 pH at 30{+-} deg. C for 6 hours. In M{sub 2} population of 20 krad two mutants with pentafoliate instead of trifoliate leaves were found. This character was true breeding in M{sub 3} M{sub 6} generation. Crosses revealed monogenic recessive inheritance of this character. The proposed gene symbol is p5. This mutant has normal maturity period and the plant height is the same as T{sub 9} (ca. 50 cm). Preliminary yield trials indicate superiority of the mutant line over control. The mutant line also shows a significant improvement in number and weight of root nodules, potentially improving green manuring value. Improvement of root nodulation in mungbean mutants was reported before by others.

Mutagenic effect of gamma-rays on improvement of yield attributing traits of greengram (Vigna radiata (L.) Wilczek)

International Nuclear Information System (INIS)

Das, T.R.; Baisakh, B.

2014-01-01

Seed samples of two morphologically distinct varieties (Sujata and OBGG-52) of greengram were treated with three doses of Gamma-rays (200 Gy, 400 Gy and 600 Gy). Mutagenic treatments in general showed reduction in mean values of germination, survival and plant growth traits in comparison to control in M 1 generation and the magnitude of reduction was directly related to the dose of the mutagens. The spectrum of chlorophyll mutations includes albina, xantha, chlorina, striata and viridis in both the varieties. The varied morphological mutations observed in leaf of both the genotypes were tricotyledonary, quadrifoliate, pentafoliate and lobed leaf. Early flowering, late flowering, tall plant, trailing type, profused poded, bold poded and sterile plant were also observed as an effect of mutagen in both the genotypes. The M 2 populations showed wider range of variations than the parent varieties. Magnitude of changes varied with mutagen dose and the varieties. Higher the dose of treatment, greater the shift in the mean and variance of different yield parameters. Genetic advance estimates showed that selection in M 2 populations would be effective in improving the yield/plant. Following selection among M 2 plants and M 3 progenies on the basis of higher yield, high yielding mutant cultures in both varieties were isolated in M 4 and evaluated in M 5 generation. Gamma-ray dose of 200 Gy was most effective for improving the yield traits in both the genotypes as it brought out improvement in pods/plant, pod length and 100-seed wt. where as 400 Gy improved 100- seed wt. in only Sujata and 600 Gy improved pod length and seeds/pod only. Isolation of high yielding lines from the gamma-rays treated population of greengram proved that different doses of gamma rays induced improvement of different yield attributing characters in greengram. (author)

Determination of selenium in food matrices by replicate sample neutron activation analysis

International Nuclear Information System (INIS)

Ventura, M.G.; Freitas, M.C.; Ventura, M.G.; Pacheco, A.M.G.

2009-01-01

The replicate sample instrumental neutron activation method was optimized and used for the determination of selenium in foodstuffs. The method was reliable, yielding accurate results. Lower detections limits were obtained after each successive irradiation. Different irradiation conditions were used depending on the type of sample. For samples with higher selenium contents (meat, fish, eggs), the measured selenium in the first replicate is in all cases larger than the detection limit, but a better accuracy was obtained with a larger number of replicates (2-3 replicates). For samples with extremely low selenium contents (vegetable samples), at least seven replicates were necessary to obtain a concentration value two times larger than the detection limit. (author)

Exposure to Cigarette Smoke Constituents in a Population of Adult Cigarette Smokers in the U.S. Who Spontaneously Switched to Cigarettes with Lower or Higher Machine Measured ‘Tar’ Yield

Directory of Open Access Journals (Sweden)

Muhammad-Kah RS

2014-12-01

Full Text Available Changes in exposure to cigarette smoke and smoking behavior were assessed in adult smokers participating in a multi-center, cross-sectional study who spontaneously switched to > 3 mg lower or higher machine measured ‘tar’ yield. Of 2,542 consenting smokers only 23 down-switchers (DWNSW and 68 up-switchers (UPSW met study eligibility criteria. Biomarkers of exposure (BOE to selected smoke constituents were measured. Large variability was observed in the BOEs (e.g. CV% for nicotine equivalents (nicotine and five of its metabolites, NE per day ranged from 59% to 78%. On average, DWNSW smoked two more cigarettes/day (+ 9% that had ~ 5.9 mg lower ‘tar’ yield. Mean NE/day were 12.0 ± 6.2 mg/day compared to 13.9 ± 8.2 mg/day after down switching. Slightly lower levels of NE/cigarette (-8%, total NNAL/day and per cigarette were observed (-18% and -23% in the DWNSW's. UPSW smoked two fewer cigarettes/day (-13% with higher ‘tar’ yield (~ 8.4 mg higher ‘tar’. NE/day was 12.5 ± 9.7 vs. 12.8 ± 9.0 mg/day. Total NNAL values per day and per cigarette were lower (-24% and -17%. Due to the large variability and insufficient power to detect significant differences in exposure based on post-hoc power calculations, no definitive conclusions can be drawn from this study. These results suggest that it might not be feasible to conduct a definitive assessment of changes in exposure among spontaneous switchers.

70-79 Effects of Crop Rotation and NP Fertilizer Rate on Grain Yield a

African Journals Online (AJOL)

amendment enabled maize yields and soil fertility to be maintained at a higher level. Multiple ... Higher grain yield and high net return of maize were realized following Niger seed, ...... Generation, Transfer and Gap Analysis Workshop. Nekemt ...

Carbon isotope discrimination and indirect selection for seed yield in lentil

International Nuclear Information System (INIS)

Matus, A.; Slinkard, A.E.; Van Kessel, C.

1995-01-01

Carbon isotope discrimination (CID) has been proposed as a secondary trait to indirectly select for improved seed yield and water-use efficiency. To determine the effectiveness of CID to indirectly select for seed yield, 10 diverse lentil (Lens culinaris Medikus) genotypes were grown at four locations in Saskatchewan in 1992 and 1993. Samples were collected for CID determination from leaves at flowering (CIDLF), leaves at maturity (CIDML) and seed at maturity (CIDMS). Variability for CID was present, but no crossover G x E interactions were observed. A significant crossover genotype by sampling date interaction for CID resulted from a change in ranking of genotypes for CIDLF and CIDML. Seed yield was positively correlated with CIDLF and CIDML. The phenotypic correlation between seed yield and CIDLF was 0.82** (df = 8). However, this highly significant relationship was an artifact resulting from the fact that samples for CIDLF were collected for all genotypes on the same day, although PI 244026, an early maturing genotype, flowered about 15 d earlier than the other lentil lines. When PI244026 was removed from the analysis, variability in CID was greatly reduced and the correlation between CIDLF and seed yield approached zero (r = 0.22, df = 7). The correlation between seed yield and CIDML remained positive and significant, but was inconsistent across locations and years. The broad sense heritability for CIDML (0.73 +/- 0.16) was lower than the broad sense heritability for seed yield (0.98 +/- 0.029). These results suggest that under the conditions tested CID should not be used to indirectly select for seed yield in lentil

Evaluation of high yielding soybean germplasm under water limitation.

Science.gov (United States)

Prince, Silvas J; Murphy, Mackensie; Mutava, Raymond N; Zhang, Zhengzhi; Nguyen, Na; Kim, Yoon Ha; Pathan, Safiullah M; Shannon, Grover J; Valliyodan, Babu; Nguyen, Henry T

2016-05-01

Limited information is available for soybean root traits and their plasticity under drought stress. To date, no studies have focused on examining diverse soybean germplasm for regulation of shoot and root response under water limited conditions across varying soil types. In this study, 17 genetically diverse soybean germplasm lines were selected to study root response to water limited conditions in clay (trial 1) and sandy soil (trial 2) in two target environments. Physiological data on shoot traits was measured at multiple crop stages ranging from early vegetative to pod filling. The phenotypic root traits, and biomass accumulation data are collected at pod filling stage. In trial 1, the number of lateral roots and forks were positively correlated with plot yield under water limitation and in trial 2, lateral root thickness was positively correlated with the hill plot yield. Plant Introduction (PI) 578477A and 088444 were found to have higher later root number and forks in clay soil with higher yield under water limitation. In sandy soil, PI458020 was found to have a thicker lateral root system and higher yield under water limitation. The genotypes identified in this study could be used to enhance drought tolerance of elite soybean cultivars through improved root traits specific to target environments. © 2015 Institute of Botany, Chinese Academy of Sciences.

Estimation of heterosis in yield and yield attributing traits in single cross hybrids of maize

Directory of Open Access Journals (Sweden)

Hari Prasad Sharma

2016-12-01

Full Text Available A field experiment was conducted at National Maize Research Program, Rampur, Chitwan, Nepal during winter season from 6th October, 2015 to 5th March 2016 to estimate different heterosis on single cross maize hybrids . Thirteen maize hybrids were tested randomized complete block design with three replications. Hybrid namely RML-98/RL-105 gave the highest standard heterosis (57.5% for grain yield over CP-666 followed by RML-4/NML-2 (32.6%, RML-95/RL-105 (29% and RML-5/RL-105 (20.6%. The hybrid RML-98/RL-105 produced the highest standard heterosis (75.1% for grain yield over Rajkumar followed by RML-4/NML-2(50.2%, RML-95/RL-105(46.6%, RML-5/RL-105 and (35.7%. Mid and better parent heterosis were significantly higher for yield and yield attributes viz. ear length, ear diameter, no of kernel row per ear, no of kernel per row and test weight. The highest positive mid-parent heterosis for grain yield was found in RML-98/RL-105 followed by RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2. For the grain yield the better parent heterosis was the highest in RML-98/RL-105, followed by RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2. These results suggested that maize production can be maximized by cultivating hybrids namely RML-98/RL-105, RML-5/RL-105, RML-95/RL-105, and RML-4/NML-2 .

Biochemical methane potential, biodegradability, alkali treatment and influence of chemical composition on methane yield of yard wastes.

Science.gov (United States)

Gunaseelan, Victor Nallathambi

2016-03-01

In this study, the biochemical CH4 potential, rate, biodegradability, NaOH treatment and the influence of chemical composition on CH4 yield of yard wastes generated from seven trees were examined. All the plant parts were sampled for their chemical composition and subjected to the biochemical CH4 potential assay. The component parts exhibited significant variation in biochemical CH4 potential, which was reflected in their ultimate CH4 yields that ranged from 109 to 382 ml g(-1) volatile solids added and their rate constants that ranged from 0.042 to 0.173 d(-1). The biodegradability of the yard wastes ranged from 0.26 to 0.86. Variation in the biochemical CH4 potential of the yard wastes could be attributed to variation in the chemical composition of the different fractions. In the Thespesia yellow withered leaf, Tamarindus fruit pericarp and Albizia pod husk, NaOH treatment enhanced the ultimate CH4 yields by 17%, 77% and 63%, respectively, and biodegradability by 15%, 77% and 61%, respectively, compared with the untreated samples. The effectiveness of NaOH treatment varied for different yard wastes, depending on the amounts of acid detergent fibre content. Gliricidia petals, Prosopis leaf, inflorescence and immature pod, Tamarindus seeds, Albizia seeds, Cassia seeds and Delonix seeds exhibited CH4 yields higher than 300 ml g(-1) volatile solids added. Multiple linear regression models for predicting the ultimate CH4 yield and biodegradability of yard wastes were designed from the results of this work. © The Author(s) 2016.

High velocity pulse biopsy device enables controllable and precise needle insertion and high yield tissue acquisition.

Science.gov (United States)

Schässburger, Kai-Uwe; Paepke, Stefan; Saracco, Ariel; Azavedo, Edward; Ekström, Christina; Wiksell, Hans

2018-02-01

Minimally invasive biopsies are a cornerstone of breast cancer management with ultrasound being the preferred guidance modality. New developments in breast cancer management and advances in imaging technologies bring new challenges to current biopsy methodologies. A new biopsy device (NeoNavia® biopsy system, 14 G) was developed. It incorporates a pneumatic needle insertion mechanism that is intended to provide better control of needle progression and enable stepwise insertion without noticeable deformation or displacement of surrounding tissue as visualized under ultrasound. A new method of tissue acquisition was designed to achieve a sampling yield higher than standard methodologies. Needle dynamics was assessed on a specifically designed test bed and sampling performance was compared to a Magnum® biopsy instrument (Bard, Covington, GA, USA) in representative tissue models. The histological quality of samples obtained ex-vivo was evaluated. A pneumatic pulse was measured to accelerate the needle to a maximum velocity of 21.2 ± 2.5 m/s on a stroke length of 2.5 mm, achieving significantly higher acceleration, maximum velocity and power than current biopsy devices. Mean weight of samples obtained by the NeoNavia device were 3.5, 4.6, and 4.3 times higher when sampling was performed in turkey breast, calf thymus and swine pancreas, respectively, as compared to samples obtained with the Magnum instrument. Ex-vivo analysis indicates that the method of tissue acquisition has no apparent negative impact on the histopathologic quality of obtained samples. Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Predicting spring barley yield from variety-specific yield potential, disease resistance and straw length, and from environment-specific disease loads and weed pressure

DEFF Research Database (Denmark)

Østergård, Hanne; Kristensen, Kristian; Pinnschmidt, Hans O.

2008-01-01

For low-input crop production, well-characterised varieties increase the possibilities of managing diseases and weeds. This analysis aims at developing a framework for analyzing grain yield using external varietal information about disease resistance, weed competitiveness and yield potential and ...... growth habit. Higher grain yield was thus predicted for taller plants under weed pressure. The results are discussed in relation to the model framework, impact of the considered traits and use of information from conventional variety testing in organic cropping systems....

Hot topic: Bovine milk samples yielding negative or nonspecific results in bacterial culturing--the possible role of PCR-single strand conformation polymorphism in mastitis diagnosis.

Science.gov (United States)

Schwaiger, K; Wimmer, M; Huber-Schlenstedt, R; Fehlings, K; Hölzel, C S; Bauer, J

2012-01-01

A large proportion of mastitis milk samples yield negative or nonspecific results (i.e., no mastitis pathogen can be identified) in bacterial culturing. Therefore, the culture-independent PCR-single strand conformation polymorphism method was applied to the investigation of bovine mastitis milk samples. In addition to the known mastitis pathogens, the method was suitable for the detection of fastidious bacteria such as Mycoplasma spp., which are often missed by conventional culturing methods. The detection of Helcococcus ovis in 4 samples might indicate an involvement of this species in pathogenesis of bovine mastitis. In conclusion, PCR-single-strand conformation polymorphism is a promising tool for gaining new insights into the bacteriological etiology of mastitis. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Soybean yield in relation to distance from the Itaipu reservoir

Science.gov (United States)

de Faria, Rogério Teixeira; Junior, Ruy Casão; Werner, Simone Silmara; Junior, Luiz Antônio Zanão; Hoogenboom, Gerrit

2016-07-01

Crops close to small water bodies may exhibit changes in yield if the water mass causes significant changes in the microclimate of areas near the reservoir shoreline. The scientific literature describes this effect as occurring gradually, with higher intensity in the sites near the shoreline and decreasing intensity with distance from the reservoir. Experiments with two soybean cultivars were conducted during four crop seasons to evaluate soybean yield in relation to distance from the Itaipu reservoir and determine the effect of air temperature and water availability on soybean crop yield. Fifteen experimental sites were distributed in three transects perpendicular to the Itaipu reservoir, covering an area at approximately 10 km from the shoreline. The yield gradient between the site closest to the reservoir and the sites farther away in each transect did not show a consistent trend, but varied as a function of distance, crop season, and cultivar. This finding indicates that the Itaipu reservoir does not affect the yield of soybean plants grown within approximately 10 km from the shoreline. In addition, the variation in yield among the experimental sites was not attributed to thermal conditions because the temperature was similar within transects. However, the crop water availability was responsible for higher differences in yield among the neighboring experimental sites related to water stress caused by spatial variability in rainfall, especially during the soybean reproductive period in January and February.

The effect of heating temperature on cytotoxicity and α-mangostin yield: Mangosteen pericarp juice and mangosteen extract

Science.gov (United States)

Mulia, Kamarza; Hasanah, Fitria; Krisanti, Elsa A.

2018-03-01

The pericarp of mangosteen (Garcinia mangostana L.) contains bioactive xanthones, with α-mangostin being the major component, has been known to possess antitumor, antiviral, and other pharmacological activities. In this study, the effect of elevated temperature during the preparation step of fresh mangosteen pericarp juice and mangosteen extract, on their α-mangostin yield and cytotoxicities was investigated. The cytotoxicity activity of fresh juice and mangosteen extract was investigated using the brine shrimp test. Heating the fresh pericarp mangosteen in water at 65°C for 30 minutes prior to blending produced a juice with higher α-mangostin yield and cytotoxicity compared to the traditional way of blending the juice at room temperature. Increasing α-mangostin yield of 9%-w/w due to heating was also observed when mangosteen extract was heated at 65°C, consistent with the increased cytotoxicity in terms of LC50 value. It is concluded that the effect of temperature on α-mangostin yield was in line with the temperature effect on cytotoxicity activity in all samples of pericarp juice and mangosteen extract in ethyl acetate fraction.

Using Low Resolution Satellite Imagery for Yield Prediction and Yield Anomaly Detection

Directory of Open Access Journals (Sweden)

Oscar Rojas

2013-04-01

Full Text Available Low resolution satellite imagery has been extensively used for crop monitoring and yield forecasting for over 30 years and plays an important role in a growing number of operational systems. The combination of their high temporal frequency with their extended geographical coverage generally associated with low costs per area unit makes these images a convenient choice at both national and regional scales. Several qualitative and quantitative approaches can be clearly distinguished, going from the use of low resolution satellite imagery as the main predictor of final crop yield to complex crop growth models where remote sensing-derived indicators play different roles, depending on the nature of the model and on the availability of data measured on the ground. Vegetation performance anomaly detection with low resolution images continues to be a fundamental component of early warning and drought monitoring systems at the regional scale. For applications at more detailed scales, the limitations created by the mixed nature of low resolution pixels are being progressively reduced by the higher resolution offered by new sensors, while the continuity of existing systems remains crucial for ensuring the availability of long time series as needed by the majority of the yield prediction methods used today.

Compressive sampling of polynomial chaos expansions: Convergence analysis and sampling strategies

International Nuclear Information System (INIS)

Hampton, Jerrad; Doostan, Alireza

2015-01-01

Sampling orthogonal polynomial bases via Monte Carlo is of interest for uncertainty quantification of models with random inputs, using Polynomial Chaos (PC) expansions. It is known that bounding a probabilistic parameter, referred to as coherence, yields a bound on the number of samples necessary to identify coefficients in a sparse PC expansion via solution to an ℓ 1 -minimization problem. Utilizing results for orthogonal polynomials, we bound the coherence parameter for polynomials of Hermite and Legendre type under their respective natural sampling distribution. In both polynomial bases we identify an importance sampling distribution which yields a bound with weaker dependence on the order of the approximation. For more general orthonormal bases, we propose the coherence-optimal sampling: a Markov Chain Monte Carlo sampling, which directly uses the basis functions under consideration to achieve a statistical optimality among all sampling schemes with identical support. We demonstrate these different sampling strategies numerically in both high-order and high-dimensional, manufactured PC expansions. In addition, the quality of each sampling method is compared in the identification of solutions to two differential equations, one with a high-dimensional random input and the other with a high-order PC expansion. In both cases, the coherence-optimal sampling scheme leads to similar or considerably improved accuracy

Compressive sampling of polynomial chaos expansions: Convergence analysis and sampling strategies

Science.gov (United States)

Hampton, Jerrad; Doostan, Alireza

2015-01-01

Sampling orthogonal polynomial bases via Monte Carlo is of interest for uncertainty quantification of models with random inputs, using Polynomial Chaos (PC) expansions. It is known that bounding a probabilistic parameter, referred to as coherence, yields a bound on the number of samples necessary to identify coefficients in a sparse PC expansion via solution to an ℓ1-minimization problem. Utilizing results for orthogonal polynomials, we bound the coherence parameter for polynomials of Hermite and Legendre type under their respective natural sampling distribution. In both polynomial bases we identify an importance sampling distribution which yields a bound with weaker dependence on the order of the approximation. For more general orthonormal bases, we propose the coherence-optimal sampling: a Markov Chain Monte Carlo sampling, which directly uses the basis functions under consideration to achieve a statistical optimality among all sampling schemes with identical support. We demonstrate these different sampling strategies numerically in both high-order and high-dimensional, manufactured PC expansions. In addition, the quality of each sampling method is compared in the identification of solutions to two differential equations, one with a high-dimensional random input and the other with a high-order PC expansion. In both cases, the coherence-optimal sampling scheme leads to similar or considerably improved accuracy.

Persistency of milk yield in Indonesian Holstein cows

Science.gov (United States)

Widyas, N.; Putra, F. Y.; Nugroho, T.; Pramono, A.; Susilowati, A.; Sutarno; Prastowo, S.

2018-03-01

Milk yield is an important trait in dairy industry; thus, information regarding this phenotype is essential to measure the productivity of a farm. Total milk yield in one lactation period was often predicted using information from samples collected within certain time intervals. The rate of change of milk production between two-time intervals is defined as persistency. This article aims to estimate the persistency of milk yield between lactation 1, 2 and 3 in Indonesian Friesian Holstein (IFH) cows. Data was collected from Limpakuwus stable, Baturraden Dairy Cattle Breeding Centre, Central Java Indonesia. Records were obtained from cows which started lactating on 2013 until the end of third lactation around the beginning of 2016. Milk yield from the first (L1), second (L2) and third (L3) lactations of 21 cows were recorded in kilograms. Samples were collected in 30 days basis interval started from the 10th day of lactation up to the 10th month. In this population, the cows first calving was around February – April 2013; while the second and third calving occurred all over the relevant year. The mean of milk yield for L1, L2 and L3 were 17.77±3.70, 16.09±5.17 and 13.73±4.02 Kg respectively. The peak of milk yields was achieved at the second month of the lactation for L1, L2 and L3. The persistency from the second to the tenth test days were 97, 93 and 94% for L1, L2 and L3, respectively. Milk yield persistency is representing ability of cow in maintain milk production after peak during lactation period. The more persistent shows better performance of dairy cattle as well as farm management. For that, persistency value could be used as valuable information in evaluating the management in Indonesian dairy farms.

Evaluation of sources of organic manure on the growth and yield of ...

African Journals Online (AJOL)

Moringa 20 t ha1 produce the highest dry matter of the plants. The least fruit number of fruits per plant than Kumba and fruit yield in t ha-1 was higher in Gilo. There was no significant interaction between varieties and manure. Yield of both varieties was higher in Makurdi than Obubra Moringa Oleifera leaf biomas and poultry ...

Effects of Row Spacing and Plant Density on Yield and Yield Components of Sweet Corn in Climatic Conditions of Isfahan

Directory of Open Access Journals (Sweden)

N. Khodaeian

2013-06-01

Full Text Available To evaluate the effects of row spacing and plant density on yield and yield components of sweet corn, variety KSC403, an experiment was conducted in Research Farm of Isfahan University of Technology, Isfahan, Iran, in 2007, as randomized complete block design with a split-plot layout and three replications. The main plots were allocated to two row spacing (60 and 75 cm and the sub-plots accommodated four levels of plant density (50000, 70000, 90000 and 110000 plants per ha. There was significant increase in leaf area index, shoot dry weight, 100-grain fresh weight and grain fresh yield, as row width was decreased from 75 to 60 cm but the plant height was decreased. There was no significant effect of row spacing on number of rows per ear, number of grains per row and number of grains per ear. Plant height, leaf area index, shoot dry weight per m2 and number of ears per m2 were increased with an increase in plant density. The number of rows per ear, number of grains per row, number of grains per ear, 100-grain fresh weight and grain fresh yield were significantly higher under plant densities of 90000 and 110000 as compared to 50000 and 70000 plants per ha. There was significant interaction between row spacing and plant density for leaf area index, shoot dry weight, number of grains per ear, 100-grain fresh weight and grain fresh yield. Under all plant densities, the grain fresh yield was higher in 60-cm row width compared to 70-cm row width. However, the difference between these two row spacing was not significant in plant densities of 50000 and 110000 plants per ha. The highest grain fresh yield (33940 kg/ha was achieved under row spacing 60 cm and 70000 plants per ha and the least grain fresh yield (20750 kg/ha was obtained in under 75 cm row width and 110000 plants per ha. Considering the obtained results of this experiment, to have maximum grain fresh yield of sweet corn under Isfahan climate, the row spacing of 60 cm and plant density of

Evaluation of the Effect of Rotation and Application Rate of Nitrogen on Yield, Yield Components and Nitrogen Efficiency Indexes in wheat

Directory of Open Access Journals (Sweden)

R Nasri

2016-02-01

seeding rate of 200 kg ha-1. Soil samples were collected after harvest of each crop from 0 to 30 cm and 31 to 60 cm soil depths using a soil auger. Wheat grain yield (according to 14% moisture obtained by harvesting the central area of 3 in 10 m in each plot. Yield components were determined from two randomly selected areas (2m2 within each plot. Plant samples collected at harvest were separated into grain and straw and oven-dried at 60˚C for 72hr. Biomass and grain sub samples analyzed for total N content using a micro-Kjeldahl digestion with sulfuric acid. The terminology of N efficiency parameters was considered according to Delogu et al, (11 and Lopez-Bellido & Lopez-Bellido, (22, Rahimizadeh et al. (30, Limon-Ortega et al. (20 methods. Results and Discussion The results showed that there were highly significant differences (P ≤ 0.01 in forage yield. There were also significant differences (P ≤ 0.05 in total dry weight, protein content and protein yield between treatments. Perko varieties produced higher fresh and dry matter yield with 69,586 (kg ha-1 and 7147 (kg ha-1, respectively compared to other varieties. Buko varieties showed greater protein percentage with 23.36 compared to the rest of the varieties. The highest and lowest grain yield, with 8345, and 4491 (kg ha-1 were obtained for Buko; wheat rotation and fallow, wheat rotation, respectively. The highest and lowest nitrogen uptake was obtained for Buko; wheat and clover, wheat rotation, respectively. The differences between the rotations were significant for various agronomic nitrogen efficiency. The rotation of oilseed radish and wheat showed greater nitrogen economic performance with 36.20 kg ha-1. By increasing nitrogen rate agronomic performance decreased with the exception in fallow- wheat. Physiological efficiency of nitrogen in fallow-wheat rotation was more than 39 (kg kg-1 of nitrogen. The maximum efficiency of nitrogen recovery was obtained for oilseed radish: wheat and Perko PVH; wheat

Contribution of insect pollinators to crop yield and quality varies with agricultural intensification

Directory of Open Access Journals (Sweden)

Ignasi Bartomeus

2014-03-01

Full Text Available Background. Up to 75% of crop species benefit at least to some degree from animal pollination for fruit or seed set and yield. However, basic information on the level of pollinator dependence and pollinator contribution to yield is lacking for many crops. Even less is known about how insect pollination affects crop quality. Given that habitat loss and agricultural intensification are known to decrease pollinator richness and abundance, there is a need to assess the consequences for different components of crop production.Methods. We used pollination exclusion on flowers or inflorescences on a whole plant basis to assess the contribution of insect pollination to crop yield and quality in four flowering crops (spring oilseed rape, field bean, strawberry, and buckwheat located in four regions of Europe. For each crop, we recorded abundance and species richness of flower visiting insects in ten fields located along a gradient from simple to heterogeneous landscapes.Results. Insect pollination enhanced average crop yield between 18 and 71% depending on the crop. Yield quality was also enhanced in most crops. For instance, oilseed rape had higher oil and lower chlorophyll contents when adequately pollinated, the proportion of empty seeds decreased in buckwheat, and strawberries’ commercial grade improved; however, we did not find higher nitrogen content in open pollinated field beans. Complex landscapes had a higher overall species richness of wild pollinators across crops, but visitation rates were only higher in complex landscapes for some crops. On the contrary, the overall yield was consistently enhanced by higher visitation rates, but not by higher pollinator richness.Discussion. For the four crops in this study, there is clear benefit delivered by pollinators on yield quantity and/or quality, but it is not maximized under current agricultural intensification. Honeybees, the most abundant pollinator, might partially compensate the loss of wild

Contribution of insect pollinators to crop yield and quality varies with agricultural intensification.

Science.gov (United States)

Bartomeus, Ignasi; Potts, Simon G; Steffan-Dewenter, Ingolf; Vaissière, Bernard E; Woyciechowski, Michal; Krewenka, Kristin M; Tscheulin, Thomas; Roberts, Stuart P M; Szentgyörgyi, Hajnalka; Westphal, Catrin; Bommarco, Riccardo

2014-01-01

Background. Up to 75% of crop species benefit at least to some degree from animal pollination for fruit or seed set and yield. However, basic information on the level of pollinator dependence and pollinator contribution to yield is lacking for many crops. Even less is known about how insect pollination affects crop quality. Given that habitat loss and agricultural intensification are known to decrease pollinator richness and abundance, there is a need to assess the consequences for different components of crop production. Methods. We used pollination exclusion on flowers or inflorescences on a whole plant basis to assess the contribution of insect pollination to crop yield and quality in four flowering crops (spring oilseed rape, field bean, strawberry, and buckwheat) located in four regions of Europe. For each crop, we recorded abundance and species richness of flower visiting insects in ten fields located along a gradient from simple to heterogeneous landscapes. Results. Insect pollination enhanced average crop yield between 18 and 71% depending on the crop. Yield quality was also enhanced in most crops. For instance, oilseed rape had higher oil and lower chlorophyll contents when adequately pollinated, the proportion of empty seeds decreased in buckwheat, and strawberries' commercial grade improved; however, we did not find higher nitrogen content in open pollinated field beans. Complex landscapes had a higher overall species richness of wild pollinators across crops, but visitation rates were only higher in complex landscapes for some crops. On the contrary, the overall yield was consistently enhanced by higher visitation rates, but not by higher pollinator richness. Discussion. For the four crops in this study, there is clear benefit delivered by pollinators on yield quantity and/or quality, but it is not maximized under current agricultural intensification. Honeybees, the most abundant pollinator, might partially compensate the loss of wild pollinators in

Epidemiology and impact of Fasciola hepatica exposure in high-yielding dairy herds.

Science.gov (United States)

Howell, Alison; Baylis, Matthew; Smith, Rob; Pinchbeck, Gina; Williams, Diana

2015-09-01

The liver fluke Fasciola hepatica is a trematode parasite with a worldwide distribution and is the cause of important production losses in the dairy industry. The aim of this observational study was to assess the prevalence of exposure to F. hepatica in a group of high yielding dairy herds, to determine the risk factors and investigate their associations with production and fertility parameters. Bulk milk tank samples from 606 herds that supply a single retailer with liquid milk were tested with an antibody ELISA for F. hepatica. Multivariable linear regression was used to investigate the effect of farm management and environmental risk factors on F. hepatica exposure. Higher rainfall, grazing boggy pasture, presence of beef cattle on farm, access to a stream or pond and smaller herd size were associated with an increased risk of exposure. Univariable regression was used to look for associations between fluke exposure and production-related variables including milk yield, composition, somatic cell count and calving index. Although causation cannot be assumed, a significant (phepatica exposure and estimated milk yield at the herd level, representing a 15% decrease in yield for an increase in F. hepatica exposure from the 25th to the 75th percentile. This remained significant when fertility, farm management and environmental factors were controlled for. No associations were found between F. hepatica exposure and any of the other production, disease or fertility variables. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Evaluation of Yield, Yield Components and Growth Indices of Safflower (Carthamus tinctorius L. in Conventional and Organic Farming Systems

Directory of Open Access Journals (Sweden)

Mahdieh Hajghani

2017-09-01

Full Text Available Introduction Application of organic fertilizers in sustainable agriculture systems improves yield sustainability of field crop. Safflower (Carthamus tinctorius L. is native to Middle East and belongs to the Asteraceae family. It is resistant to saline conditions, water stress, and can reach the deep-lying water of soil. The humic acid (HA mentioned as an environmentally friendly, organic matter with low levels of hormonal-like compounds is useful in improving agriculture production (Samavat and Malakuti 2006. The HA influence on plant growth depends on the source, concentration and molecular weight of the substance. Vermicompost is produced by earthworms, mainly Eisenia foetida, it has higher levels of available nutrients compared to the original materials of composts produced by other methods. Recent evidences suggest that using different amounts of vermicompost increased vegetative traits and concentration of minerals in sunflower. However, there has been little discussion about organic farming of safflower. The main objectives of the present study were to determine the effect of organic treatments on yield, yield components, and growth indices of safflower and to compare it with conventional agriculture. Materials and methods This research was conducted in Agricultural and Natural Resources Research Station in Kerman, Iran during 2012–2013. It was carried out in a randomized complete block (RCB design and had three replications. The current research has been performed to investigate the effects of two different sources of organic fertilizer on spring safflower. Four levels of vermicompost (V: 0, 3, 6 and 9 t ha-1 were considered in the main plots. Liquid humic acid at four different concentrations (HA: 0, 1000, 2000 and 3000 ppm were examined and kept in the subplots. Humic acid as a foliar treatment on leaf surface was applied twice at the beginning of stem elongation and at flowering times. In this study, aimed to compare organic farming

Sugarcane trash management assessed by the interaction of yield with soil properties

Directory of Open Access Journals (Sweden)

Flávio Carlos Dalchiavon

2013-12-01

Full Text Available Currently, sugarcane plays an important global role, particularly with a view to alternative energy sources. Thus, in a sugarcane field of the mill Vale do Paraná S/A Álcool e Açúcar, Rubineia, São Paulo State, managed under two green cane harvest systems (cane trash left on and cane trash removed from the soil, Pearson and spatial correlations between the sugarcane yield (variety RB855035 in the third cut and soil physical and chemical properties were studied to identify the property best correlated with stalk yield and the best harvest method. For this purpose, two geostatistical grids (121 sampling points on 1.30 ha were installed on a eutrophic Red Argisol (homogeneous slope of 0.065 m m-1, in 2011, to determine the properties: stalk yield and sugarcane plant population, and soil resistance to penetration, gravimetric moisture, bulk density, and carbon stock, in the layers 0-0.20 and 0.20-0.40 m. The data were analyzed by descriptive, linear correlation and geostatistical analysis. In both treatments, the property stand density was best correlated with sugarcane yield (r = 0.725 in the trash mulching treatment - TM and r = 0.769 in the trash removal treatment - TR. However, in relation to the soil properties, bulk density (0-0.20 m was best correlated (r = 0.305 in TM, r = 0.211 in TR. Similarly, from the spatial point of view, stand density was the property that best explained the sugarcane yield. However, in the TM treatment the density (0.20-0.40 m was the only soil property spatially correlated with stalk yield. The carbon stock in the soil of the TM was 11.5 % higher than in the TR treatment. Results of the TM treatment were best, also with regard to soil management and conservation.

Yield stress independent column buckling curves

DEFF Research Database (Denmark)

Stan, Tudor‐Cristian; Jönsson, Jeppe

2017-01-01

of the yield stress is to some inadequate degree taken into account in the Eurocode by specifying that steel grades of S460 and higher all belong to a common set of “raised” buckling curves. This is not satisfying as it can be shown theoretically that the current Eurocode formulation misses an epsilon factor......Using GMNIA and shell finite element modelling of steel columns it is ascertained that the buckling curves for given imperfections and residual stresses are not only dependent on the relative slenderness ratio and the cross section shape but also on the magnitude of the yield stress. The influence...... in the definition of the normalised imperfection magnitudes. By introducing this factor it seems that the GMNIA analysis and knowledge of the independency of residual stress levels on the yield stress can be brought together and give results showing consistency between numerical modelling and a simple modified...

Production yields of 2-alkylcyclobutanones in irradiated foods

Energy Technology Data Exchange (ETDEWEB)

Marchioni, E.; Ennahar, S. [Universite de Strasbourg, Illkirch (France). Faculte de Pharmacie. Lab. de Chimie Analytique et Sciences de l' Aliment], e-mail: marchion@unistra.fr, e-mail: ennahar@unistra.fr; Horvatovich, P. [University of Groningen (Netherlands). Dept. of Pharmacy. Analytical Biochemistry], e-mail: p.l.horvatovich@rug.nl; Ndiaye, B. [Centre Hospitalier National de Fann, Dakar (Senegal)], e-mail: ibamath@hotmail.com

2009-07-01

2-alkycyclobutanones are formed by irradiation exclusively, and are considered as unique radiolytic product (URP). Because of the URP character of the 2-alkycyclobutanones, these compounds are good marker of irradiation treatment. The European Committee for Standardization (CEN) developed an analytical method (EN 1785) for detection of 2-alkycyclobutanones having a detection limit of 0.2 pmol, limiting the application to foodstuffs treated for microbial disinfection (doses > 0.5 kGy), with fat content higher than 1.0 g %. The use of this EN 1785 and the supercritical extraction analytical methods allowed the determination of the production yields of 2-alkycyclobutanones in broad range of foodstuffs. The obtained production yields were between 0.20 and 12.21 nmol/mmol fatty acid/kGy), and showed strong dependency from he nature of the food matrix. The amount 2-alkycyclobutanones intake from irradiated foodstuffs by consumer calculated based on production yields determined in this work show, that the doses used in toxicological studies were much higher, than that are consumed by human through eating irradiated foods. (author)

Production yields of 2-alkylcyclobutanones in irradiated foods

International Nuclear Information System (INIS)

Marchioni, E.; Ennahar, S.

2009-01-01

2-alkycyclobutanones are formed by irradiation exclusively, and are considered as unique radiolytic product (URP). Because of the URP character of the 2-alkycyclobutanones, these compounds are good marker of irradiation treatment. The European Committee for Standardization (CEN) developed an analytical method (EN 1785) for detection of 2-alkycyclobutanones having a detection limit of 0.2 pmol, limiting the application to foodstuffs treated for microbial disinfection (doses > 0.5 kGy), with fat content higher than 1.0 g %. The use of this EN 1785 and the supercritical extraction analytical methods allowed the determination of the production yields of 2-alkycyclobutanones in broad range of foodstuffs. The obtained production yields were between 0.20 and 12.21 nmol/mmol fatty acid/kGy), and showed strong dependency from he nature of the food matrix. The amount 2-alkycyclobutanones intake from irradiated foodstuffs by consumer calculated based on production yields determined in this work show, that the doses used in toxicological studies were much higher, than that are consumed by human through eating irradiated foods. (author)

Delineating sampling procedures: Pedagogical significance of analysing sampling descriptions and their justifications in TESL experimental research reports

Directory of Open Access Journals (Sweden)

Jason Miin-Hwa Lim

2011-04-01

Full Text Available Teaching second language learners how to write research reports constitutes a crucial component in programmes on English for Specific Purposes (ESP in institutions of higher learning. One of the rhetorical segments in research reports that merit attention has to do with the descriptions and justifications of sampling procedures. This genre-based study looks into sampling delineations in the Method-related sections of research articles on the teaching of English as a second language (TESL written by expert writers and published in eight reputed international refereed journals. Using Swales’s (1990 & 2004 framework, I conducted a quantitative analysis of the rhetorical steps and a qualitative investigation into the language resources employed in delineating sampling procedures. This investigation has considerable relevance to ESP students and instructors as it has yielded pertinent findings on how samples can be appropriately described to meet the expectations of dissertation examiners, reviewers, and supervisors. The findings of this study have furnished insights into how supervisors and instructors can possibly teach novice writers ways of using specific linguistic mechanisms to lucidly describe and convincingly justify the sampling procedures in the Method sections of experimental research reports.

Deep tissue optical imaging of upconverting nanoparticles enabled by exploiting higher intrinsic quantum yield through use of millisecond single pulse excitation with high peak power

DEFF Research Database (Denmark)

Liu, Haichun; Xu, Can T.; Dumlupinar, Gökhan

2013-01-01

We have accomplished deep tissue optical imaging of upconverting nanoparticles at 800 nm, using millisecond single pulse excitation with high peak power. This is achieved by carefully choosing the pulse parameters, derived from time-resolved rate-equation analysis, which result in higher intrinsic...... quantum yield that is utilized by upconverting nanoparticles for generating this near infrared upconversion emission. The pulsed excitation approach thus promises previously unreachable imaging depths and shorter data acquisition times compared with continuous wave excitation, while simultaneously keeping...... therapy and remote activation of biomolecules in deep tissues....

Evaluation of common methods for sampling invertebrate pollinator assemblages: net sampling out-perform pan traps.

Science.gov (United States)

Popic, Tony J; Davila, Yvonne C; Wardle, Glenda M

2013-01-01

Methods for sampling ecological assemblages strive to be efficient, repeatable, and representative. Unknowingly, common methods may be limited in terms of revealing species function and so of less value for comparative studies. The global decline in pollination services has stimulated surveys of flower-visiting invertebrates, using pan traps and net sampling. We explore the relative merits of these two methods in terms of species discovery, quantifying abundance, function, and composition, and responses of species to changing floral resources. Using a spatially-nested design we sampled across a 5000 km(2) area of arid grasslands, including 432 hours of net sampling and 1296 pan trap-days, between June 2010 and July 2011. Net sampling yielded 22% more species and 30% higher abundance than pan traps, and better reflected the spatio-temporal variation of floral resources. Species composition differed significantly between methods; from 436 total species, 25% were sampled by both methods, 50% only by nets, and the remaining 25% only by pans. Apart from being less comprehensive, if pan traps do not sample flower-visitors, the link to pollination is questionable. By contrast, net sampling functionally linked species to pollination through behavioural observations of flower-visitation interaction frequency. Netted specimens are also necessary for evidence of pollen transport. Benefits of net-based sampling outweighed minor differences in overall sampling effort. As pan traps and net sampling methods are not equivalent for sampling invertebrate-flower interactions, we recommend net sampling of invertebrate pollinator assemblages, especially if datasets are intended to document declines in pollination and guide measures to retain this important ecosystem service.

effect of deficit irrigation on growth and yield of okro

African Journals Online (AJOL)

User

reduce the demand for irrigation water (Boland et al., 1993). Deficit irrigation is another way in which water use efficiency can be maximized for higher yields per unit of irrigation water. Stegman (1982) reported that the yield of maize, sprinkler irrigated to induce a 30 - 40 percent depletion of available water between.

Hydrogeochemical and stream sediment sampling for uranium in the sandstone environment

International Nuclear Information System (INIS)

Wenrich, K.J.

1985-01-01

Sandstone terranes commonly host uranium occurrences in the western United States. In addition, because sedimentary terranes, particularly shales and immature, not well cemented sandstone, contribute more sediment and soluble material than do plutonic, volcanic, or metamorphic terranes they are an excellent regime for hydrogeochemical and stream-sediment prospecting. Because of higher conductivity, and hence higher uranium content, of waters draining such environments the sampling need not be as precise nor the analytical detection limit as low as in other terranes to yield a successful survey. Nevertheless, reasonable preparation and care of the samples is recommended: (1) The water samples should be filtered through 0.45 μm membranes and acidified to a pH of less than 1. (2) Because the adsorption of uranium by organic material is so significant it is recommended that the reasonable finest stream-sediment fraction, 4 , conductivity, etc.) are useful in the data reduction towards the elimination of false anomalies. (author)

Performance of a Brazilian sample on the Portuguese translation of the BNI Screen for Higher Cerebral Functions.

Science.gov (United States)

Prigatano, George P; Souza, Lígia M N; Braga, Lucia W

2018-03-01

The Barrow Neurological Institute (BNI) Screen for Higher Cerebral Functions (BNIS) has been translated into several languages and found useful in evaluating multiple domains of cognitive and affective dysfunction, particularly in neuro-rehabilitation settings. Normative data from countries with high literacy rates have reported strikingly similar mean level of performance scores on this test, with age typically correlating higher with total score performance than education. In the present study, we obtain convenience sample normative data from a native Brazilian population on a Portuguese translation of the BNIS (i.e., BNIS-PT). The BNIS was translated into Portuguese by two native speaking Portuguese neuropsychologists who were also fluent in English. It was then administered to 201 normally functioning native Brazilian individuals who varied considerably in age and formal educational training. The mean BNIS total score was similar to what previous studies reported, but primarily in younger adults with at least 12 years of formal education. In this Brazilian sample, the correlation of educational level and BNIS total score was r = .68, p < .001. The correlation of age and BNIS total score was r = -.36, p < .001. This is the opposite pattern to that observed in previous standardization studies. The strong correlation of education with performance in various subtests was observed in all age groups (ages ranging from 15 to 85 years). This standardization study provides guidelines for calculating expected average performance levels on the BNIS-PT for Brazilian individuals with varying degrees of age and education. Educational level positively correlated with test performance on the BNIS-PT and was repeatedly observed to overshadow the effects of age, suggesting its important role in the development of higher cerebral functions in multiple domains in a Brazilian sample of normally functioning individuals.

Measurement of the decay asymmetries of the radiative hyperon decays {xi}{sup 0}{yields}{lambda}{gamma} and {xi}{sup 0}{yields}{sigma}{sup 0}{gamma} with the NA48/1 experiment; Messung der Zerfallsasymmetrien der radiativen Hyperonzerfaelle {xi}{sup 0}{yields}{lambda}{gamma} und {xi}{sup 0}{yields}{sigma}{sup 0}{gamma} mit dem NA48/1-Experiment

Energy Technology Data Exchange (ETDEWEB)

Behler, Matthias

2007-07-01

The radiative decay of a hyperon into a light hyperon and a photon allows to study the structure of the electroweak interaction of hadrons. For this purpose, the decay asymmetry is an appropriate observable. It describes the distribution of the daughter hyperon with respect to the polarization (vector)P of the mother hyperon by (dN)/(d cos({theta})){proportional_to}1+{alpha}vertical stroke (vector)P vertical stroke cos({theta}), where {theta} is the angle between (vector)P and the momentum of the daughter hyperon. The radiative decay {xi}{sup 0}{yields}{lambda}{sub {gamma}} is of particular interest since all calculations at quark level predict a positive decay asymmetry whereas two existing measurements result in a negative value of {alpha}{sub {xi}{sup 0}{yields}{lambda}{sub {gamma}}}=-0.73{+-}0.17. The goal of the analysis presented here was to verify these results and to improve the accuracy of the decay asymmetry measurement. In addition, the decay asymmetry of the similar decay {xi}{sup 0}{yields}{sigma}{sup 0}{sub {gamma}} was measured, and the well-known decay {xi}{sup 0}{yields}{lambda}{pi}{sup 0} was used to test the analysis strategy. During the data taking period in 2002, the NA48/1 experiment at CERN was searching for rare K{sub S} and hyperon decays. The collected data represents the world's largest sample of {xi}{sup 0} decays. From this sample, about 52,000 {xi}{sup 0}{yields}{lambda}{sub {gamma}} decays, 15,000 {xi}{sup 0}{yields}{sigma}{sup 0}{sub {gamma}} decays and 4 mill. {xi}{sup 0}{yields}{lambda}{pi}{sup 0} decays with small background were extracted as well as the corresponding anti {xi} decays. The available anti {xi} samples amount about one tenth of the {xi}{sup 0} samples. The measurement of the decay asymmetries was based on the comparison between data and a detailed Monte Carlo simulation, giving the following results: {alpha}{sub {xi}{sup 0}{yields}{lambda}{sub {gamma}}}=-0.701 {+-} 0.019{sub stat}{+-} 0.064{sub sys}, {alpha

Forage yield and quality response of annual ryegrass ( Lolium ...

African Journals Online (AJOL)

The dry matter (DM) content, in vitro organic matter digestibility (IVOMD), crude protein (CP) and metabolisable energy (ME) were higher in the treatments being irrigated once every two weeks. These results conclude that higher irrigation coupled with high N application significantly improved the dry matter yield, while water ...

Responses of Seed Yield, Yield Components and Some Morpho-physiological Traits of Wheat Cultivars (Triticum aestivum to the Application Methods of Fulzyme Biofertilizer

Directory of Open Access Journals (Sweden)

A. Eslami

2014-10-01

Full Text Available To study the effect of application methods of Fulzym biofertilizer (containing Bacillus subtilis on yield, yield components and some morpho-physiological characteristics of four cultivars wheat, an experiment was conducted in field of Astan Quds Razavi in 2010- 2011. The experiment performed was in split plot based on randomized complete block design with three replications. Four wheat cultivars (Falat, Pishtaz, Bahar and Toos were assigned to main plots and four biofertilizer application methods (as seed inoculation, using in irrigation water, seed inoculation and irrigation and control to sub plots. Results indicated that Falat had the lowest plant height (61.5 cm than other varieties. Plant height of Toos and Pishtaz were about 14.5 percent higher than Falat. Application methods of Fulzym increased chlorophyll content and plant height. Highest chlorophyll contents were obtained when seeds inoculated by Fulzyme and used through irrigation. At the end of growing season, it was found that chlorophyll content of Falat and Toos flag leaves were higher than Pishtaz and Bahar. It was also revealed that Bahar when Fulzyme was used showed a better response to treatments than other varieties as for as biological and seed yields were concerned. Highest seed yield produced by irrigation and combination of seed inoculation and irrigation (9063 and 8609 kg.ha-1 and lowest seed yield (5858 kg.ha-1 to Falat in the control treatment.

Factors affecting groundnut yield in pothwar region of Punjab, Pakistan

International Nuclear Information System (INIS)

Qasim, M.; Tariq, S.A.; Nasir, M.; Saeed, R.; Mahmood, M.A.

2016-01-01

Groundnut being an important oilseed crop in the Pothwar region of Pakistan has the productivity level of 609 kg ha/sup -1/ , much lower from the potential yield of 3000 kg ha/sup -1/. Present study was designed to explore factors affecting productivity of groundnut along with its profitability analysis. The sample farms were classified into small, medium and large farms. Farm-level crop data were gathered during two cropping seasons i.e., rabi 2008-09 and kharif 2009. One hundred and forty groundnut producers were selected for collecting data using the well-structured questionnaire from two important districts recognised for area and production of groundnut. Results showed that large farmers allocated significantly higher area (34 percent) to groundnut cultivation compared to other categories of farmers. The gross margins were also significantly higher at large farms. Ploughing frequency, seed rate and labor man-days have positive relationship with groundnut productivity. Therefore, the provision of improved groundnut production technologies package and improved seed to groundnut growers may enhance the productivity and area under this crop. (author)

Harvester development for new high yielding SRC crops and markets

Energy Technology Data Exchange (ETDEWEB)

Paulson, Mark

2005-07-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented.

Harvester development for new high yielding SRC crops and markets

International Nuclear Information System (INIS)

Paulson, Mark

2005-01-01

This report describes the development of harvesting equipment for short rotation cultivation (SRC) crops produced in the UK that can produce fuel to a required specification in a single pass at a cost that is profitable for the grower while minimising the cost of the product. Details are given of the manufacture and installation of new components for large crop harvesting, and production of fuel suitable for co-firing in a coal combustion system using pulverised fuel and fuel suitable for gasification. The development of the drive chain to cope with the higher yielding crops, field tests on SRC crops, and determination of the most economic harvesting system are discussed along with the remanufacture of the chipping drum, and production of market chip samples. Harvesting guidance and an economic analysis of harvesting systems are presented

Sampling in Developmental Science: Situations, Shortcomings, Solutions, and Standards.

Science.gov (United States)

Bornstein, Marc H; Jager, Justin; Putnick, Diane L

2013-12-01

Sampling is a key feature of every study in developmental science. Although sampling has far-reaching implications, too little attention is paid to sampling. Here, we describe, discuss, and evaluate four prominent sampling strategies in developmental science: population-based probability sampling, convenience sampling, quota sampling, and homogeneous sampling. We then judge these sampling strategies by five criteria: whether they yield representative and generalizable estimates of a study's target population, whether they yield representative and generalizable estimates of subsamples within a study's target population, the recruitment efforts and costs they entail, whether they yield sufficient power to detect subsample differences, and whether they introduce "noise" related to variation in subsamples and whether that "noise" can be accounted for statistically. We use sample composition of gender, ethnicity, and socioeconomic status to illustrate and assess the four sampling strategies. Finally, we tally the use of the four sampling strategies in five prominent developmental science journals and make recommendations about best practices for sample selection and reporting.

The effect of melliferous bee (Apis mellifera carnica poll and mechanical means on seed yield, yield components and quality of alfalfa seed (Medicago sativa L

Directory of Open Access Journals (Sweden)

Jevtić Goran

2005-01-01

Full Text Available Number of alfalfa pollinators in free pollination was investigated as well as effect of measures that promote pollination alfalfa (using sugar syrup and mechanical means. In first year of investigations, with higher precipitation, higher number of others pollinators (80,8 then honeybees (45,6 on alfalfa field was determined. In second year, there were much more honeybees (139,5 then all others alfalfa pollinators (12,37. Pollination improvement with sugar syrup had positive effect on seed yield and seed yield components since by this way more seeds were obtained compare to free pollination and by using mechanical means. Highest seed yield was obtained with sugar syrup (44,90 gm-2, with mechanical improvement of pollination 40,74 gm-2 and in free pollination 30,41 gm-2. As for yield components pollination improvement gave better results compare to free pollination. Pod setting and number of seeds per pod were especially significant compare to control. There were no statistically significant differences between free pollination and improved pollination for seed quality components (mass of 1000 seeds, energy of germination and germination ability.

Effect of planting date on yield of wheat genotypes in Sindh

International Nuclear Information System (INIS)

Khokhar, Z.; Hussain, I.

2010-01-01

Due to reduction in tillering period and increased risk of hot weather during grain filling, late planting results in linear reduction in wheat grain yield. A study was undertaken to determine the effects of planting dates on growth and yield of different wheat genotypes in Sindh. The trial was laid out in RCBD with split plot arrangement having four replications during 2000-01 and 2001-02 at Sakrand, Sindh. Four sowing dates i.e. November 1 and 15, December 1 and 15 were in main plots, whereas six wheat genotypes (V-7001, V-7002, V-7004, MPT-6, Abadgar-93, and Anmol-91) were in sub plots. Because of better tillering, plant growth, growth period, number of grain per unit area and grain weight, November 15 planted wheat had maximum grain yield of 5904 kg ha/sup -1/, followed by November 1 and December 1 which gave 5302 and 4948 kg ha/sup -1 /respectively. Wheat planted on December 15 resulted in minimum grain yield of 4756 kg ha/sup -1/. Wheat genotype, V-7002 had significantly (P<0.05) higher grain yield of 5578 kg ha/sup -1/ in comparison with other genotypes. Whereas genotype MPT-6 had grain yield of 5366 kg ha-1 that was also significantly higher than other genotypes. However, V-7004 had minimum grain yield of 4716 kg ha/sup -1/ in comparison with other genotypes. While evaluating performance of different genotypes on different sowing dates, V-7002 resulted in maximum yield on November 15 and late planting. On the other hand, V-7004 had lower yield on all planting dates. Results from the study revealed that maximum grain yield could be achieved with wheat planted in first fortnight of November and any delay in wheat planting might reduce wheat yield. (author)

Effect of Different Tillage Methods and Cover Crop Types on Yield and Yield Components of Wheat

Directory of Open Access Journals (Sweden)

Z Sharefee

2018-05-01

Full Text Available Introduction Conservation agriculture is an appropriate strategy for maintaining and improving agricultural resources which increases crop production and stability and also provides environmental protection. This attitude contributes to the conservation of natural resources (soil, water, and air and is one of the most effective ways to overcome the drought crisis, water management and compensation of soil organic matter in arid and semi-arid regions. The practice of zero-tillage decreases the mineralization of organic matter and contributes to the sequestration of organic carbon in the soil. Higher amounts of organic matter in the soil improve soil structure and root growth, water infiltration and retention, and cation exchange capacity. In addition, zero-tillage reduces soil compaction and crop production costs. Cover crops are cultivated to protect the soil from erosion and elements loss by leaching or runoff and also improve the soil moisture and temperature. Given that South Khorasan farmers still use traditional methods of cultivation of wheat, and cover crops have no place in their farming systems, the aim of this study was to investigate the effect of cover crops types and tillage systems on yield and yield components of wheat in Birjand region. Materials and Methods A split plot field experiment was conducted based on randomized complete block design with three replications at the Research Farm of the University of Birjand over the growing season of 2014-2015. The main factor was the type of tillage (no-till, reduced tillage and conventional tillage and cover crop type (chickling pea (Lathyrus sativus, rocket salad (Eruca sativa, triticale (X Triticosecale witmack, barley (Hordeum vulgaris and control (no cover crop was considered as sub plots. Cover crops were planted on July 2014. Before planting wheat, cover crops were dried through spraying paraquat herbicide using a backpack sprayer at a rate of 3 L ha-1. Then the three tillage

Evaluation of sampling methods for Bacillus spore-contaminated HVAC filters.

Science.gov (United States)

Calfee, M Worth; Rose, Laura J; Tufts, Jenia; Morse, Stephen; Clayton, Matt; Touati, Abderrahmane; Griffin-Gatchalian, Nicole; Slone, Christina; McSweeney, Neal

2014-01-01

The objective of this study was to compare an extraction-based sampling method to two vacuum-based sampling methods (vacuum sock and 37mm cassette filter) with regards to their ability to recover Bacillus atrophaeus spores (surrogate for Bacillus anthracis) from pleated heating, ventilation, and air conditioning (HVAC) filters that are typically found in commercial and residential buildings. Electrostatic and mechanical HVAC filters were tested, both without and after loading with dust to 50% of their total holding capacity. The results were analyzed by one-way ANOVA across material types, presence or absence of dust, and sampling device. The extraction method gave higher relative recoveries than the two vacuum methods evaluated (p≤0.001). On average, recoveries obtained by the vacuum methods were about 30% of those achieved by the extraction method. Relative recoveries between the two vacuum methods were not significantly different (p>0.05). Although extraction methods yielded higher recoveries than vacuum methods, either HVAC filter sampling approach may provide a rapid and inexpensive mechanism for understanding the extent of contamination following a wide-area biological release incident. Published by Elsevier B.V.

Effect of genotype and applied management on alfalfa yield and quality

Directory of Open Access Journals (Sweden)

Milić Dragan

2014-01-01

Full Text Available It is essential to apply advanced management for successful production of alfalfa hay with premium quality (high content of protein and minerals. The maximum yield and the best quality of alfalfa in Serbia can be obtained by cutting four or five times per year. In alfalfa stands, use of cutting system with three cuts per year is inefficient and does not allow full exploitation of cultivar genetic potential and environmental conditions. It is possible, and economically beneficial to grow alfalfa on pseudoglay soils after application of lime and organic manure, with recommended rates 2.5 t ha-1 lime and 30 t ha-1 manure. Cutting alfalfa at the beginning of flowering stage (5 cuts per year provides hay with better quality - higher content of crude protein and lower portion of fibre fractions (neutral detergent fibre, acid detergent fibre, acid detergent lignin, and there is no reduction in dry matter yield. There is no differences in alfalfa quality after application of lower (2.5 t ha-1 and higher dose (5.0 t ha-1 of lime + 30 t ha-1 of organic manure, but there is significant increase of dry matter yield and protein yield per hectare followed by higher level of metabolic energy per unit area. Upon the results of this study, base of successful alfalfa production would be to develop management system and cultivars for different environments that would maximize hay yields without significant loses of quality.

Sample Size for Measuring Grammaticality in Preschool Children from Picture-Elicited Language Samples

Science.gov (United States)

Eisenberg, Sarita L.; Guo, Ling-Yu

2015-01-01

Purpose: The purpose of this study was to investigate whether a shorter language sample elicited with fewer pictures (i.e., 7) would yield a percent grammatical utterances (PGU) score similar to that computed from a longer language sample elicited with 15 pictures for 3-year-old children. Method: Language samples were elicited by asking forty…

Effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean (Ricinus communis L.

Directory of Open Access Journals (Sweden)

parviz rezvani moghadam

2009-06-01

Full Text Available In order to study the effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean, an experiment was conducted at Experimental station, College of Agriculture, Ferdowsi University of Mashhad, Iran in years 2004-2005. The experimental treatments comprised all combinations of four sowing dates (11 April, 25 April, 8 May and 22 May and three different fertilizers (cow manure (30 tons/ha, compost (30 tons/ha, chemical fertilizers (100 kg/ha N and 250 kg/ha of super phosphate and no fertilizer as control. Different characteristics such as plant height, main inflorescence height, number of inflorescence per plant, number of secondary stems per plant, number of capsules per plant, number of grain per plant, grain weight per plant, 100 seed weight, grain yield, oil percentage and oil yield were recorded. A factorial arrangement based on a randomized complete block design with three replications was used. The results showed by delaying sowing date grain yield, seed oil percentage and oil yield were decreased, but there was no significant differences between 25 April, 8 May and 22 May sowing dates. Harvest index and 100 seed weight did not affect by neither sowing dates nor fertilizer treatments. The highest number of branches per plant, number of fertile inflorescences per plant, number of fertile capsules per plant, number of grain per plant, grain weight per plant and biological yield were obtained at 8 May sowing date on chemical fertilizer. Percentage of seed oil, grain yield and oil yield was higher at the first sowing date (11 April in compost and chemical fertilizer treatments. Keywords: Castor bean, sowing date, fertilizer, grain yield, oil percentage.

Nanoscale Roughness of Faults Explained by the Scale-Dependent Yield Stress of Geologic Materials

Science.gov (United States)

Thom, C.; Brodsky, E. E.; Carpick, R. W.; Goldsby, D. L.; Pharr, G.; Oliver, W.

2017-12-01

Despite significant differences in their lithologies and slip histories, natural fault surfaces exhibit remarkably similar scale-dependent roughness over lateral length scales spanning 7 orders of magnitude, from microns to tens of meters. Recent work has suggested that a scale-dependent yield stress may result in such a characteristic roughness, but experimental evidence in favor of this hypothesis has been lacking. We employ an atomic force microscope (AFM) operating in intermittent-contact mode to map the topography of the Corona Heights fault surface. Our experiments demonstrate that the Corona Heights fault exhibits isotropic self-affine roughness with a Hurst exponent of 0.75 +/- 0.05 at all wavelengths from 60 nm to 10 μm. If yield stress controls roughness, then the roughness data predict that yield strength varies with length scale as λ-0.25 +/ 0.05. To test the relationship between roughness and yield stress, we conducted nanoindentation tests on the same Corona Heights sample and a sample of the Yair Fault, a carbonate fault surface that has been previously characterized by AFM. A diamond Berkovich indenter tip was used to indent the samples at a nominally constant strain rate (defined as the loading rate divided by the load) of 0.2 s-1. The continuous stiffness method (CSM) was used to measure the indentation hardness (which is proportional to yield stress) and the elastic modulus of the sample as a function of depth in each test. For both samples, the yield stress decreases with increasing size of the indents, a behavior consistent with that observed for many engineering materials and recently for other geologic materials such as olivine. The magnitude of this "indentation size effect" is best described by a power-law with exponents of -0.12 +/- 0.06 and -0.18 +/- 0.08 for the Corona Heights and Yair Faults, respectively. These results demonstrate a link between surface roughness and yield stress, and suggest that fault geometry is the physical

A novel condition for stable nonlinear sampled-data models using higher-order discretized approximations with zero dynamics.

Science.gov (United States)

Zeng, Cheng; Liang, Shan; Xiang, Shuwen

2017-05-01

Continuous-time systems are usually modelled by the form of ordinary differential equations arising from physical laws. However, the use of these models in practice and utilizing, analyzing or transmitting these data from such systems must first invariably be discretized. More importantly, for digital control of a continuous-time nonlinear system, a good sampled-data model is required. This paper investigates the new consistency condition which is weaker than the previous similar results presented. Moreover, given the stability of the high-order approximate model with stable zero dynamics, the novel condition presented stabilizes the exact sampled-data model of the nonlinear system for sufficiently small sampling periods. An insightful interpretation of the obtained results can be made in terms of the stable sampling zero dynamics, and the new consistency condition is surprisingly associated with the relative degree of the nonlinear continuous-time system. Our controller design, based on the higher-order approximate discretized model, extends the existing methods which mainly deal with the Euler approximation. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Optimizing rice yields while minimizing yield-scaled global warming potential.

Science.gov (United States)

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.

Evaluation of common methods for sampling invertebrate pollinator assemblages: net sampling out-perform pan traps.

Directory of Open Access Journals (Sweden)

Tony J Popic

Full Text Available Methods for sampling ecological assemblages strive to be efficient, repeatable, and representative. Unknowingly, common methods may be limited in terms of revealing species function and so of less value for comparative studies. The global decline in pollination services has stimulated surveys of flower-visiting invertebrates, using pan traps and net sampling. We explore the relative merits of these two methods in terms of species discovery, quantifying abundance, function, and composition, and responses of species to changing floral resources. Using a spatially-nested design we sampled across a 5000 km(2 area of arid grasslands, including 432 hours of net sampling and 1296 pan trap-days, between June 2010 and July 2011. Net sampling yielded 22% more species and 30% higher abundance than pan traps, and better reflected the spatio-temporal variation of floral resources. Species composition differed significantly between methods; from 436 total species, 25% were sampled by both methods, 50% only by nets, and the remaining 25% only by pans. Apart from being less comprehensive, if pan traps do not sample flower-visitors, the link to pollination is questionable. By contrast, net sampling functionally linked species to pollination through behavioural observations of flower-visitation interaction frequency. Netted specimens are also necessary for evidence of pollen transport. Benefits of net-based sampling outweighed minor differences in overall sampling effort. As pan traps and net sampling methods are not equivalent for sampling invertebrate-flower interactions, we recommend net sampling of invertebrate pollinator assemblages, especially if datasets are intended to document declines in pollination and guide measures to retain this important ecosystem service.

Effect of Zeolite, Selenium and Silicon on Yield, Yield Components and Some Physiological Traits of Canola under Salt Stress Conditions

Directory of Open Access Journals (Sweden)

A Bybordi

2016-07-01

chlorophyll, relative water content, catalase, peroxidase and superoxide dismutase activity, as well as malondialdehyde, sodium and potassium content in the leaves. The samples were immediately frozen in liquid nitrogen and kept in -80° C freezer. At the end of the growing season, agronomic traits such as silique number, seed number on silique, 1000- grain weight, grain yield, biological yield and harvest index were recorded. Total oil percentage and fatty acids (oleic, linolenic and linoleic percentage were measured. Results and Discussion The combined analysis of variance indicated that the effect of year was significant on all studied traits, except for silique number, grain number in silique, linoleic acid, chlorophyll content and peroxidase activity. In addition, the results showed that the main effect of zeolite, selenium and silicon were significant on all canola studied traits. However, relative water content and peroxidase activity were not affected by silicon application. Comparison of means indicated that triple interaction was significant at 1000- grain weight, grain yield, biological yield, chlorophyll content, photosynthesis rate, relative water content and antioxidant enzyme activity. Some traits such as 1000- grain weight, grain yield, biological yield, harvest index, oil percentage, linolenic percentage and superoxide dismutase activity as well as sodium content in leaves were found to be higher in the second year compared with the first year. Zeolite significantly increased silique number and grain number in silique. Furthermore, harvest index increased with the increase of zeolite level. According to the results, selenium increased silique number, grain number in silique and harvest index in canola plants. Silicon foliar application also significantly increased silique number, grain number in silique and harvest index. The highest chlorophyll contents, photosynthesis rate and relative water content were registered when zeolite was applied at 10% w: w and

Yield and Yield Attributes Responses of Soybean (Glycine max L. Merrill to Elevated CO2 and Arbuscular Mycorrhizal Fungi Inoculation in the Humid Transitory Rainforest

Directory of Open Access Journals (Sweden)

Nurudeen ADEYEMI

2017-06-01

Full Text Available Variations in yield components and grain yield of arbuscular mycorrhizal fungi (AMF inoculated soybean varieties (Glycine max L. Merrill grown in CO2 enriched environment in the humid rainforest were tested.  A screen house trial was established with soybean varieties (‘TGx 1448-2E’, ‘TGx 1440-1E’ and ‘TGx 1740-2F’, AMF inoculation (with and without and CO2 enrichment (350±50 ppm and 550±50 ppm in open top chamber, arranged in completely randomised design, replicated three times. A field trial was also conducted; the treatments were arranged in a split-split plot configuration fitted into randomised complete block design. In the main plot the variant was CO2 enrichment, the sub-plot consisted of AMF inoculation (with and without, while the sub-sub plot consisted of soybean varieties, replicated three times. Both trials had significantly higher grain yield at elevated CO2 than ambient. This could be attributed to improved yield attributes, more spore count and root colonisation. In both trials, inoculated soybean had significantly higher dry pod weight than un-inoculated, which could suggest the increased grain yield observed on the field. AMF inoculated soybean varieties outperformed un-inoculated in both CO2 enriched and ambient concentrations. AMF inoculated soybean variety ‘TGx 1740-2F’ is most preferable in CO2 enriched environment, while variety ‘TGx 1448-2E’ had the most stable grain yield in all growth environments.

Economic Sustainability of Payments for Water Yield in Slash Pine Plantations in Florida

Directory of Open Access Journals (Sweden)

Andres Susaeta

2016-09-01

Full Text Available Forests play an important role with respect to water resources, and can be managed to increase surface- and groundwater recharge. With the creation of a forest water yield payment system, privately-owned forests, which comprise the majority of forest area in the Southeastern US, could become an important potential source of additional water supply. The economic tradeoffs between timber revenues and water yield are not well understood. To address this, we use the example case of slash pine production in Florida, and employ a forest stand-level optimal rotation model that incorporates forest management, and assessed a range of feasible water yield prices on forest profitability. Our analysis was limited to a range of water yield prices ($0.03, $0.07, and $0.30 kL−1 that would make water yield from slash pine economically competitive with water supply alternatives (e.g., reservoir construction. Even at relatively low water prices, we found that managing slash pine forests for both timber and water yield was preferred to managing just for timber when assuming an initial tree density less than 2200 trees·ha−1. However, with higher levels of initial tree planting density and low water prices, managing slash pine for timber production alone was more profitable unless stands are heavily-thinned, suggesting that even mid-rotation stands could be included in a forest water yield payments program. Compared to low-tree planting density and lightly thinned slash pine forests, an intensive approach of planting a lot of trees and then heavily thinning them generated 8% to 33% higher profits, and 11% more ($192 ha−1 on average. We conclude that payments for water yield are economically feasible for slash pine stands in Florida, and would benefit forest landowners, particularly with higher prices for water yield.

Milk Yield and Quality of Holstein and Jersey Breeds of Cattle in ...

African Journals Online (AJOL)

Friesian cows were used to evaluate the effects of breed, month of lactation and milking time on the milk yield and quality of commercial dairy cows under the tropical climate of Nigeria. Mean milk yield and milk protein were significantly higher ...

Yielding of leaf celery Apium graveolens L. var. secalinum Alef. depending on the number of harvests and irrigation

Directory of Open Access Journals (Sweden)

Ewa Rożek

2013-04-01

Full Text Available Leaf celery (Apium graveolensvar. secalinum is a vegetable with medicinal and spicy properties. Its numerous intensely fragrant leaves can be cut several times during the plant growing period. The aim of this study was to evaluate the effect of irrigation and number of harvests on leaf celery yield of the cultivars ‘Afina’ and‘Gewone Snij’. Plant irrigation significantly increased leaf yield and plant height of leaf celery. Higher total yield was obtained from non-irrigated plants when leaves were harvested three times, whereas for irrigated plants yield was higher in the case of two leaf harvests. Irrespective of the experimental factors, higher yield was obtained from the cultivar ‘Gewone Snij’.

Sampling in Developmental Science: Situations, Shortcomings, Solutions, and Standards

Science.gov (United States)

Bornstein, Marc H.; Jager, Justin; Putnick, Diane L.

2014-01-01

Sampling is a key feature of every study in developmental science. Although sampling has far-reaching implications, too little attention is paid to sampling. Here, we describe, discuss, and evaluate four prominent sampling strategies in developmental science: population-based probability sampling, convenience sampling, quota sampling, and homogeneous sampling. We then judge these sampling strategies by five criteria: whether they yield representative and generalizable estimates of a study’s target population, whether they yield representative and generalizable estimates of subsamples within a study’s target population, the recruitment efforts and costs they entail, whether they yield sufficient power to detect subsample differences, and whether they introduce “noise” related to variation in subsamples and whether that “noise” can be accounted for statistically. We use sample composition of gender, ethnicity, and socioeconomic status to illustrate and assess the four sampling strategies. Finally, we tally the use of the four sampling strategies in five prominent developmental science journals and make recommendations about best practices for sample selection and reporting. PMID:25580049

Evaluation of Mycorrhizal Fungi, Vermicompost and Humic Acid on Essence Yield and Root Colonization of Fennel

Directory of Open Access Journals (Sweden)

I. Akbari

2016-02-01

Full Text Available Introduction The main objective of sustainable agriculture is to decrease the off-farm inputs such as chemical fertilizers, increased farm nutrient cycle through reduced tillage and the use of biological and organic fertilizers. Studies on medicinal plants indicates that the use of sustainable farming systems provide the best conditions for the production of these plants. Mycorrhizal fungi, vermicompost and humic acid are samples of biological and organic fertilizer that can be used, to eliminate or substantially reduce the use of chemical inputs in order to increase the quantity, quality and stability of the products. Mycorrhizal fungi are one of the most important rhizosphere microorganisms which have symbiotic relation with root of most crops. Mycorrhizal symbiosis improves the soil physical (through expansion of hyphae of fungus, chemical (through increased absorption of nutrients and biological (the soil food web quality. These fungus increased nutrient uptake, such as phosphorus and some micronutrients, water uptake, reducing the negative effects of environmental stress and increase resistance to pathogens and improve the quality of their host plants. Fennel (Foeniculum vulgare Mill is one of the most important medicinal plants, as the essential oil from the seeds used in a variety of industries, pharmaceutical, food and cosmetic use. Anethole is important component of the essential oil of fennel seed. Materials and Methods This experiment was conducted as a factorial based on randomized complete block design in order to evaluate the effects of vermicompost application, humic acid and mycorrhizal fungi on quantitative and qualitative aspects of fennel yield at experimental farm of Shahrood University during growing season of 1391-92. This experiment includes 12 treatments and 3 applications. Vermicompost levels include: v1 (no application v2 (4 ton ha-1 v3 (8 ton ha-1. Mycorrhizal fungi include: m1 (no inoculation and m2 (inoculation and

The characteristics of high-yield genotype of early-mature mutant lines in barley

International Nuclear Information System (INIS)

Chen Xiulan; Han Yuepeng; He Zhentian; Yang Hefeng

2000-01-01

The correlation and genetic parameters of eight agronomic traits of 36 early mature mutant lines induced from barley Sunong 9052 were studied by stepwise regression and path analysis. The results showed that: (1) the growing period of early mutants was shortened 2-13 days from that of their parent and the trait of yield had a great mutation range; (2) the number of grain per panicle significantly correlated with the days from sowing to heading; (3) according to direct path coefficients, the main characters related with individual plant-yield were in order of productive panicle per plant > 1000-grain-weight > number of grain per panicle > fertility, the high-yield genotype had more productive panicle and higher 10000-grain-weight, and to increase the yield in the breeding of early mature mutation was to select the lines with more tillers and productive panicles, higher 1000-grain-weight and lower number of grain per panicle; (4) the higher broad-sense heritability and genetic variation coefficient were found in 1000-grain-weight and the days from sowing to heading

The Role of Iron and Zinc on Tuber Yield and Yield Components of Potato

Directory of Open Access Journals (Sweden)

Elham Jam

2015-08-01

Full Text Available The soils of potato production fields in Ardabil due to alkalinity and not having a proper crop rotations are deficient in micronutrients. To evaluate the effect of these micronutrients on the yield and some traits affecting potato tubers an experiment was conducted in a complete randomized block design with three replications in Ardabil during 2012. Micronutrient treatments used were the various concentrations of iron and zinc (0.002, 0.004 and 0.008 concentrations of these elements as Fe1Zn1, Fe1Zn2, Fe1Zn3, Fe2Zn1, Fe2Zn2, Fe2Zn3, Fe3Zn1 and Fe3Zn2 and a control treatment (Fe0Zn0. Analysis of variance of traits under study showed statistically significant differences among treatments in terms of tuber yield, number of tubers per plant, tuber size, skin thickness and volumetric weight and dry weight of tubers. The highest tuber yield (48.10 t.ha-1 and maximum skin thickness were obtained from Fe1Zn3 treatment. The highest tuber number belonged to Fe2Zn1 (0.004 and 0.002 concentrations of iron and zinc and Fe1Zn3 (0.002 and 0.008 concentrations of iron and zinc. Tuber weights higher than 35 grams and higest volumetric tuber weight were produced by using Fe3Zn2. The conclusion is this that using Fe1Zn3 traetment (0.002 and 0.008 concentrations resulted in highest tuber yield and thickness of tuber skin.

Devices used by automated milking systems are similarly accurate in estimating milk yield and in collecting a representative milk sample compared with devices used by farms with conventional milk recording

NARCIS (Netherlands)

Kamphuis, Claudia; Dela Rue, B.; Turner, S.A.; Petch, S.

2015-01-01

Information on accuracy of milk-sampling devices used on farms with automated milking systems (AMS) is essential for development of milk recording protocols. The hypotheses of this study were (1) devices used by AMS units are similarly accurate in estimating milk yield and in collecting

Executive Summary High-Yield Scenario Workshop Series Report

Energy Technology Data Exchange (ETDEWEB)

Leslie Park Ovard; Thomas H. Ulrich; David J. Muth Jr.; J. Richard Hess; Steven Thomas; Bryce Stokes

2009-12-01

To get a collective sense of the impact of research and development (R&D) on biomass resource availability, and to determine the feasibility that yields higher than baseline assumptions used for past assessments could be achieved to support U.S. energy independence, an alternate “High-Yield Scenario” (HYS) concept was presented to industry experts at a series of workshops held in December 2009. The workshops explored future production of corn/agricultural crop residues, herbaceous energy crops (HECs), and woody energy crops (WECs). This executive summary reports the findings of that workshop.

Electromagnetic Navigational Bronchoscopy versus CT-guided Percutaneous Sampling of Peripheral Indeterminate Pulmonary Nodules: A Cohort Study.

Science.gov (United States)

Bhatt, Kavita M; Tandon, Yasmeen K; Graham, Ruffin; Lau, Charles T; Lempel, Jason K; Azok, Joseph T; Mazzone, Peter J; Schneider, Erika; Obuchowski, Nancy A; Bolen, Michael A

2018-03-01

Purpose To compare the diagnostic yield and complication rates of electromagnetic navigational bronchoscopic (ENB)-guided and computed tomography (CT)-guided percutaneous tissue sampling of lung nodules. Materials and Methods Retrospectively identified were 149 patients sampled percutaneously with CT guidance and 146 patients who underwent ENB with transbronchial biopsy of a lung lesion between 2013 and 2015. Clinical data, incidence of complications, and nodule pathologic analyses were assessed through electronic medical record review. Lung nodule characteristics were reviewed through direct image analysis. Molecular marker studies and pathologic analyses from surgical excision were reviewed when available. Multiple-variable logistic regression models were built to compare the diagnostic yield and complication rates for each method and for different patient and disease characteristics. Results CT-guided sampling was more likely to be diagnostic than ENB-guided biopsy (86.0% [129 of 150] vs 66.0% [99 of 150], respectively), and this difference remained significant even after adjustments were made for patient and nodule characteristics (P guided sampling (P guided sampling, 88.9% [32 of 36]; CT-guided sampling, 82.0% [41 of 50]). The two groups had similar rates of major complications (symptomatic hemorrhage, P > .999; pneumothorax requiring chest tube and/or admission, P = .417). Conclusion CT-guided transthoracic biopsy provided higher diagnostic yield in the assessment of peripheral pulmonary nodules than navigational bronchoscopy with a similar rate of clinically relevant complications. © RSNA, 2017 Online supplemental material is available for this article.

Signal-background interference effects for gg{yields}H{yields}W{sup +}W{sup -} beyond leading order

Energy Technology Data Exchange (ETDEWEB)

Bonvini, Marco [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Caola, Fabrizio; Melnikov, Kirill [Johns Hopkins Univ., Baltimore (United States). Dept. of Physics and Astronomy; Forte, Stefano [Univ. di Milano, Sezione di Milano (Italy). Dipt. di Fisica; INFN, Sezione di Milano (Italy); Ridolfi, Giovanni [Univ. di Genova, Sezione di Genova (Italy). Dipt. di Fisica; INFN, Sezione di Genova (Italy)

2013-04-15

We study the effect of QCD corrections to the gg {yields} H {yields} W{sup +}W{sup -} signal-background interference at the LHC for a heavy Higgs boson. We construct a soft-collinear approximation to the NLO and NNLO corrections for the background process, which is exactly known only at LO. We estimate its accuracy by constructing and comparing the same approximation to the exact result for the signal process, which is known up to NNLO, and we conclude that we can describe the signal-background interference to better than O(10%) accuracy. We show that our result implies that, in practice, a fairly good approximation to higher-order QCD corrections to the interference may also be obtained by rescaling the known LO result by a K-factor computed using the signal process.

Comparison of heavy metal loads in stormwater runoff from major and minor urban roads using pollutant yield rating curves

International Nuclear Information System (INIS)

Davis, Brett; Birch, Gavin

2010-01-01

Trace metal export by stormwater runoff from a major road and local street in urban Sydney, Australia, is compared using pollutant yield rating curves derived from intensive sampling data. The event loads of copper, lead and zinc are well approximated by logarithmic relationships with respect to total event discharge owing to the reliable appearance of a first flush in pollutant mass loading from urban roads. Comparisons of the yield rating curves for these three metals show that copper and zinc export rates from the local street are comparable with that of the major road, while lead export from the local street is much higher, despite a 45-fold difference in traffic volume. The yield rating curve approach allows problematic environmental data to be presented in a simple yet meaningful manner with less information loss. - A simple method for representing data onroad runoff pollution allows comparisons among dissimilar sites and could form the basis for a pollution database.

Trading forests for yields in the Peruvian Amazon

Science.gov (United States)

Gibbs, Holly

2012-03-01

Our knowledge of how agriculture expands, and the types of land it replaces, is remarkably limited across the tropics. Most remote-sensing studies focus on the net gains and losses in forests and agricultural land rather than the land-use transition pathways (Gibbs et al 2010). Only a handful of studies identify land sources for new croplands or plantations, and then only for farming systems aggregated together (e.g., Koh and Wilcove 2008, Morton et al 2006, Gibbs et al 2010). Gutiérrez-Vélez et al (2011), however, have taken a leap forward by tracking the different expansion pathways for smallholder and industrial oil palm plantations. Using a combination of Landsat, MODIS and field surveys, they investigate whether higher yields in new agricultural lands spare forests in the Peruvian Amazon and in a smaller focus area in the Ucayali region. Across the Peruvian Amazon, they show that between 2000 and 2010, new high-yield oil palm plantations replaced forests 72% of the time and accounted for 1.3% of total deforestation, with most expansion occurring after 2006. Gutiérrez-Vélez et al went further in the Ucayali region and compared land sources for new high-yield and low-yield plantations. Expansion of higher-yield agricultural lands should logically reduce the total area needed for production, thus potentially sparing forests. In the Ucayali focus area, expansion of high-yield oil palm did convert less total land area but more forest was cleared than with low-yield expansion. Smaller-scale plantations tended to expand into already cleared areas while industrial-scale plantations traded their greater yields for forests, leading to higher land-clearing carbon emissions per production unit (Gibbs et al 2008). Gutiérrez-Vélez et al show that higher yields may require less land for production but more forest may be lost in the process, and they emphasize the need for stronger incentives for land sparing. The potential land-saving nature of these high-yield

Effect of Row Intercropping Patterns on Yield, Yield Components, and Weed Control of Fenugreek (Trigonellafoenumgreacum L. and Anise (Pimpinellaanisum L.

Directory of Open Access Journals (Sweden)

F Mardani

2016-02-01

Full Text Available Introduction Due to population growth and food shortage agricultural production is on increasing demand. In this order increasing cultivation area and yield per unit area are two ways of obtaining higheragricultural production (20. There is another important way that without incurring additional costs and use of water and fertilizer could result in higher production. This approach is increasing agricultural production per unit area by growing more than one crop in a year. Intercropping will be successful when competition for sources issless than competition within a species. Plants in the mixture can be chosen in a way that a species benefits from environmental changes caused by other species in mixed cultures directly (7, 15. Intercropping inhibits the growth and development of weeds and leads to increased production. Since the system will reduce the pesticide use, environmental pollution will be also less proportionally (37. Materials and Methods In order to evaluate the yield, yield components and potential weeds control under intercropping fenugreek and anise, an experiment was carried out based on a randomized complete block design with three replicationsat the Agricultural Research Field of Yasouj University during growing season of 2012-2013. Treatments included pure cultures of fenugreek and anise, single-row, double-row and three-tier intercropping of fenugreek and anise at no weed control and weed control conditions. Results and Discussion The results showed that different intercropping treatments had significant effects on pod number per plant, grain weight and grain and biological yield of fenugreek and also, on number of lateral branches, number of grains per plant and grain and biological yield of anise. There were nosignificant effects on plant height, number of lateral branches, number of grain per pod, harvest index of fenugreek, as well as plant height, number of umbel let per plant, seed weight and harvest index of anise. The

Effect of Integrated Nutrient Management on Yield and Yield ...

African Journals Online (AJOL)

Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...

Yield potential of a radiation induced early-dwarf mutant in linseed

International Nuclear Information System (INIS)

Nayar, G.G.

1975-01-01

An early maturing dwarf mutant, TL-1 was isolated in the high yielding linseed (Linum usitatissimum L.) wariety Neelum following seed irradiation with 50 kR gamma rays. The yield components of the mutant have been evaluated for its productivity in the M 7 generation. TL-1 is compact and significantly short in height (41.8 +- 2.71 cm) as compared to Neelum (79.2 +- 3.08 cm). In flowering the mutant is 30 days earlier than the parent under Trombay conditions. TL-1 and Neelum did not differ significantly in their mean number of primary branches. Although the mean seed yield per plant is lower, in 1000 seed weight the mutant is markedly superior to the parent. The oil content in TL-1 is significantly higher by 3.5 percent points than Neelum and its oil is lighter in colour. By growing more plants per unit area with reduced spacing, the yield potential of TL-1 was considerably increased. The productivity of oil per hectare per day of TL-1 was higher than Neelum. (author)

Climate Variability and Sugarcane Yield in Louisiana.

Science.gov (United States)

Greenland, David

2005-11-01

)], mean maximum August temperature, mean minimum February temperature, soil water surplus between April and September, and occurrence of autumn (fall) hurricanes, were built into a model to simulate adjusted yield values. The CCV model simulates the yield value with an rmse of 5.1 t ha-1. The mean of the adjusted yield data over the study period was 60.4 t ha-1, with values for the highest and lowest years being 73.1 and 50.6 t ha-1, respectively, and a standard deviation of 5.9 t ha-1. Presumably because of the almost constant high water table and soil water availability, higher precipitation totals, which are inversely related to radiation and temperature, tend to have a negative effect on the yields. Past trends in the values of critical climatic variables and general projections of future climate suggest that, with respect to the climatic environment and as long as land drainage is continued and maintained, future levels of sugarcane yield will rise in Louisiana.

High yield and facile microwave-assisted synthesis of conductive H_2SO_4 doped polyanilines

International Nuclear Information System (INIS)

Gizdavic-Nikolaidis, Marija R.; Jevremovic, Milutin M.; Milenkovic, Maja; Allison, Morgan C.; Stanisavljev, Dragomir R.; Bowmaker, Graham A.; Zujovic, Zoran D.

2016-01-01

The microwave-assisted synthesis of polyaniline (PANI) was performed using ammonium persulphate (APS) as oxidizing agent in 0.5 M–2.5 M concentration range of aqueous sulphuric acid (H_2SO_4) at 93 W applied microwave power of 10 min duration. The microwave (MW) synthesized PANIs had 3 times higher yield in comparison to PANI samples prepared using a classical method, CS (0 W MW power) at the same temperature for 10 min synthesis duration period. Fourier Transform Infrared (FTIR) and UV–Vis spectroscopies confirmed the formation of PANI structure in all products. The influence of H_2SO_4 acid dopant on the spin concentration of MW and CS H_2SO_4 doped PANI samples were examined by EPR spectroscopy, while the morphological characteristics were investigated by using scanning electron microscopy (SEM). XRD results showed amorphous phases in both MW and CS H_2SO_4 doped PANI samples. Conductivity measurements revealed ∼1.5 times higher conductivity values for MW H_2SO_4 doped PANI samples in comparison with PANI samples prepared by the CS method under same condition. The influence of sulfate anion in comparison to chloride anion as a dopant on morphological, dopant levels and conductivity properties of MW PANI samples were also investigated. - Highlights: • Nanoporous microwave synthesized doped polyanilines as chemical sensor material. • Morphology and physical properties of polyanilines depend on acid concentration. • Spin concentration is determined by the nature of the polyaniline synthesis.

Yield trends and yield gap analysis of major crops in the world

OpenAIRE

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are quantified, yield gaps evaluated by crop experts, current yield progress by breeding estimated, and different yield projections compared. Results show decreasing yield growth for wheat and rice, but ...

Evolution of uranium fission-fragment charge yields with neutron number. Strong effect of multi-chance fission on yield asymmetries

Energy Technology Data Exchange (ETDEWEB)

Moeller, Peter [Los Alamos National Laboratory, Theoretical Division, Los Alamos, NM (United States); Schmitt, Christelle [CEA/DSM-CNRS/IN2P3, Grand Accelerateur National d' Ions Lourds, Caen (France)

2017-01-15

We use the Brownian shape-motion model, with its recent extensions, which allow modeling of odd-even staggering, to calculate the evolution of fission-fragment charge distributions with neutron number for the compound-system sequence {sup 234}U, {sup 236}U, {sup 238}U, and {sup 240}U. We compare to experimental data where available, for neutron- and electromagnetic-induced fission over a compound-nucleus excitation energy range from about 6 to 20 MeV. A notable result of the study is that the evolution of the location of the peak charge yield from Z = 54 in {sup 234}U towards Z = 52 in heavier isotopes, seen in the experimental data, is present also in the calculated yields. We further show that to describe yields at higher compound-nucleus excitation energies, then, already at 20 MeV, it is necessary to take multi-chance fission into account. (orig.)

Equity yields

NARCIS (Netherlands)

Vrugt, E.; van Binsbergen, J.H.; Koijen, R.S.J.; Hueskes, W.

2013-01-01

We study a new data set of dividend futures with maturities up to ten years across three world regions: the US, Europe, and Japan. We use these asset prices to construct equity yields, analogous to bond yields. We decompose the equity yields to obtain a term structure of expected dividend growth

Hot spots of wheat yield decline with rising temperatures.

Science.gov (United States)

Asseng, Senthold; Cammarano, Davide; Basso, Bruno; Chung, Uran; Alderman, Phillip D; Sonder, Kai; Reynolds, Matthew; Lobell, David B

2017-06-01

Many of the irrigated spring wheat regions in the world are also regions with high poverty. The impacts of temperature increase on wheat yield in regions of high poverty are uncertain. A grain yield-temperature response function combined with a quantification of model uncertainty was constructed using a multimodel ensemble from two key irrigated spring wheat areas (India and Sudan) and applied to all irrigated spring wheat regions in the world. Southern Indian and southern Pakistani wheat-growing regions with large yield reductions from increasing temperatures coincided with high poverty headcounts, indicating these areas as future food security 'hot spots'. The multimodel simulations produced a linear absolute decline of yields with increasing temperature, with uncertainty varying with reference temperature at a location. As a consequence of the linear absolute yield decline, the relative yield reductions are larger in low-yielding environments (e.g., high reference temperature areas in southern India, southern Pakistan and all Sudan wheat-growing regions) and farmers in these regions will be hit hardest by increasing temperatures. However, as absolute yield declines are about the same in low- and high-yielding regions, the contributed deficit to national production caused by increasing temperatures is higher in high-yielding environments (e.g., northern India) because these environments contribute more to national wheat production. Although Sudan could potentially grow more wheat if irrigation is available, grain yields would be low due to high reference temperatures, with future increases in temperature further limiting production. © 2016 John Wiley & Sons Ltd.

Factors influencing diagnostic yield of CT-guided percutaneous core needle biopsy for bone lesions

International Nuclear Information System (INIS)

Li, Y.; Du, Y.; Luo, T.Y.; Yang, H.F.; Yu, J.H.; Xu, X.X.; Zheng, H.J.; Li, B.

2014-01-01

Aim: To evaluate the factors influencing diagnostic yield of computed tomography (CT)-guided percutaneous core needle biopsy (CNB) for bone lesions. Materials and methods: Between September 2005 and July 2011, 162 consecutive CT-guided CNB procedures were performed in 155 patients. The variables analysed were age, sex, lesion location, lesion type, lesion size, specimen size, biopsy needle gauge, and individual radiologist. The factors influencing diagnostic yield of CT-guided percutaneous CNB for bone lesions were determined by multivariate analysis of variables. Results: The diagnostic yield was 81.5%. Diagnostic yield was 89.9% for lytic bone lesions and 48.5% for sclerotic bone lesions (p < 0.001), and 89.2% for lesions ≥3 cm and 73.4% for lesions <3 cm (p = 0.010). The significant factors influencing diagnostic yield of CT-guided percutaneous CNB for bone lesions were lesion type [p < 0.001; odds ratio (OR) for a lytic lesion was approximately 12 times higher than that for a sclerotic lesion; 95% confidence interval (CI): 4.22–34.01], and lesion size (p = 0.012; OR for a lesion size ≥3 cm was about five-times higher than that for a lesion size <3 cm; 95% CI: 1.42–16.71). Conclusion: Lesion type and lesion size are determining factors in diagnostic yield. The higher diagnostic yield is correlated with lytic lesion and lesion size ≥3 cm

Yield models for Eucalyptus globulus fuelwood plantations in Ethiopia

Energy Technology Data Exchange (ETDEWEB)

Pukkala, T.; Pohjonen, V. (Joensuu Univ. (FI). Faculty of Forestry)

1990-01-01

Based on 53 tree analyses and 105 sample plots of Eucalyptus globulus, models for volume and biomass at single tree and stand levels were developed. The possible growing sites were divided into four site classes. In seedling stands, the site class I corresponds to yield class 44 m{sup 3} ha{sup -1} year{sup -1}, in coppice stands to yield class 46 m{sup 3} ha{sup -1} year{sup -1}. The site class IV corresponds in seedling stand to yield class 9 m{sup 3} ha{sup -1} year{sup -1}, in coppice stands to yield class 13 m{sup 3} ha{sup -1} year{sup -1}. The maximum mean annual increment was reached in seedling stands at the age of 18-19 years, in coppice stands at the age of 14 years. (author).

Effect of cropping system on yield of some sweetpotato and okra ...

African Journals Online (AJOL)

A field trial was conducted for 2 years to determine cropping system effect on yield of some sweetpotato and okra cultivars in an intercropping system. Sweetpotato variety TIS 87/0087 produced significantly (P<0.05) higher number of tubers per plant than Tis 8164 and Tis 2532.op.1.13 varieties. Tuber yield was also ...

Using historical wafermap data for automated yield analysis

International Nuclear Information System (INIS)

Tobin, K.W.; Karnowski, T.P.; Gleason, S.S.; Jensen, D.; Lakhani, F.

1999-01-01

To be productive and profitable in a modern semiconductor fabrication environment, large amounts of manufacturing data must be collected, analyzed, and maintained. This includes data collected from in- and off-line wafer inspection systems and from the process equipment itself. This data is increasingly being used to design new processes, control and maintain tools, and to provide the information needed for rapid yield learning and prediction. Because of increasing device complexity, the amount of data being generated is outstripping the yield engineer close-quote s ability to effectively monitor and correct unexpected trends and excursions. The 1997 SIA National Technology Roadmap for Semiconductors highlights a need to address these issues through open-quotes automated data reduction algorithms to source defects from multiple data sources and to reduce defect sourcing time.close quotes SEMATECH and the Oak Ridge National Laboratory have been developing new strategies and technologies for providing the yield engineer with higher levels of assisted data reduction for the purpose of automated yield analysis. In this article, we will discuss the current state of the art and trends in yield management automation. copyright 1999 American Vacuum Society

Biogas yield from Sicilian kitchen waste and cheese whey

Directory of Open Access Journals (Sweden)

Antonio Comparetti

2013-09-01

Full Text Available The aim of this study is to determine the chemical composition of kitchen waste and cheese whey, as well as the biogas yield obtained from the Anaerobic Digestion (AD tests of these two raw materials. Since the separated waste collection is performed in the town of Marineo (Palermo, a sample of kitchen waste, different from food industry one and included in the Organic Fraction of Municipal Solid Waste (OFMSW, was collected from the mass stored at the households of this town. Moreover, a sample of cheese whey was collected in a Sicilian mini dairy plant, where sheep milk is processed. This investigation was carried out inside laboratory digesters of Aleksandras Stulginskis University (Lithuania. Total Solids (TS resulted 15.6% in kitchen waste and 6% in cheese whey, while both the raw materials showed a high content of organic matter, 91.1% and 79.1%, respectively. The biogas yield resulted 104.6 l kg–1 from kitchen waste and 30.6 l kg–1 from cheese whey. The biogas yield from TS resulted 672.6 l kg–1 using kitchen waste and 384.7 l kg–1 using cheese whey. The biogas yield from Volatile Solids (VS resulted 738.9 l kg–1 using kitchen waste and 410.3 l kg–1 using cheese whey.

Determination of strontium-90 in soil samples

Energy Technology Data Exchange (ETDEWEB)

Chang, C C

1976-06-01

The determination of /sup 90/Sr in soil by tri-n-butyl phosphate (TBP) is often interfered with iron which is always present in soil sample. Based on the method given by the U.S. Environmental Protection Agency, HClO/sub 4/ is added to remove iron ions while the soil sample is analyzed with TBP. The effect of different concentrations of HClO/sub 4/ on extraction yield of iron and chemical yield of yttrium is investigated. The experimental results show that 2N HClO/sub 4/ is the optimum concentration. The chemical yield of yttrium can reach about 60 percent, and all iron ions can be removed. This method has successfully been applied to analyze the soil samples taken from the site of the nuclear power plant in North Taiwan.

On the absolute calibration of a DT fusion neutron yield diagnostic

Directory of Open Access Journals (Sweden)

Ruiz C.L.

2013-11-01

Full Text Available Recent advances in Inertial Confinement Fusion (ICF experiments at Lawrence Livermore National Laboratory's National Ignition Facility (NIF have underscored the need for accurate total yield measurements of DT neutrons because yield measurements provide a measure of the predicted performance of the experiments. Future gas-puff DT experiments at Sandia National Laboratory's Z facility will also require similar measurements. For ICF DT experiments, the standard technique for measuring the neutron (14.1 MeV yield, counts the activity (counts/minute induced in irradiated copper samples. This activity occurs by the 63Cu(n,2n62Cu reaction where 62Cu decays by positrons (β+ with a half-life of 9.67 minutes. The calibrations discussed here employ the associated-particle method (APM, where the α (4He particles from the T(d,n4He reaction are measured to infer neutron fluxes on a copper sample. The flux induces 62Cu activity, measured in a coincidence counting system. The method leads to a relationship between a DT neutron yield and copper activity known as the F-factor. The goal in future experiments is to apply this calibration to measure the yield at NIF with a combined uncertainty approaching 5%.

Unused natural variation can lift yield barriers in plant breeding.

Directory of Open Access Journals (Sweden)

Amit Gur

2004-10-01

Full Text Available Natural biodiversity is an underexploited sustainable resource that can enrich the genetic basis of cultivated plants with novel alleles that improve productivity and adaptation. We evaluated the progress in breeding for increased tomato (Solanum lycopersicum yield using genotypes carrying a pyramid of three independent yield-promoting genomic regions introduced from the drought-tolerant green-fruited wild species Solanum pennellii. Yield of hybrids parented by the pyramided genotypes was more than 50% higher than that of a control market leader variety under both wet and dry field conditions that received 10% of the irrigation water. This demonstration of the breaking of agricultural yield barriers provides the rationale for implementing similar strategies for other agricultural organisms that are important for global food security.

Effect of Seed Priming, Sowing methods and Bio-fertilizers on Yield and Yield Components of Seedy Watermelon (Citrullus Lanatus

Directory of Open Access Journals (Sweden)

M Zarandi

2018-02-01

Full Text Available Introduction Watermelon (Citrullus Lanatus is one of the most important fresh fruits in Iran particularly during summer. After China, in terms of production and cultivation area, Iran placed second in the world. Research conducted in different regions (especially in arid and semi-arid regions, like Iran indicated that poor germination and establishment of seedlings in the field causes low yield, particularly in vegetables. Seed priming, (to increase the percentage and rate of germination and transplanting to increase plant establishment and use of bio-fertilizers to increase food availability during the growing season are inevitable to transfer to ecological agriculture. The purpose of this research was to evaluate the effect of seeds osmopriming, transplanting and bio-fertilizers on watermelon grain yield. Materials and Methods This experiment was conducted at split plot based on complete block design with three replications in the Laboratory, Greenhouse and the Farm of the Faculty of Agriculture, Ferdowsi University of Mashhad in 2013. First factor was seed priming in two levels (unprimed and primed, the second factor was transplanting in two levels (direct sowing and transplantation and the third factor was bio-fertilizers containing pseudomonas and Azotobacter in two levels (non bio-fertilizers and bio-fertilizers. Leaf area index (LAI, number of fruits per plant, number of seeds per fruit, 1000 seed weight, grain yield and total dry matter were determined. Results and Discussion Transplants produced using osmoprimed seeds that had been sprayed with bio-fertilizers on the field (T2P2K2 had higher LAI than the other treatments (Table 3. Bio-fertilizers in both transplanting and direct sowing produced more LAI, but osmopriming of seeds with PEG 6000 had little impact on LAI (Table 3. LAI is one of the growth parameters which had a great effect to achieve maximum yield that needs to be at higher level before flowering. Izadkhah et al. (2010 and

Contrasting response of biomass and grain yield to severe drought in Cappelle Desprez and Plainsman V wheat cultivars

Directory of Open Access Journals (Sweden)

Kenny Paul

2016-02-01

Full Text Available We report a case study of natural variations and correlations of some photosynthetic parameters, green biomass and grain yield in Cappelle Desprez and Plainsman V winter wheat (Triticum aestivum L. cultivars, which are classified as being drought sensitive and tolerant, respectively. We monitored biomass accumulation from secondary leaves in the vegetative phase and grain yield from flag leaves in the grain filling period. Interestingly, we observed higher biomass production, but lower grain yield stability in the sensitive Cappelle cultivar, as compared to the tolerant Plainsman cv. Higher biomass production in the sensitive variety was correlated with enhanced water-use efficiency. Increased cyclic electron flow around PSI was also observed in the Cappelle cv. under drought stress as shown by light intensity dependence of the ratio of maximal quantum yields of Photosystem I and Photosystem II, as well by the plot of the Photosystem I electron transport rate as a function of Photosystem II electron transport rate. Higher CO2 uptake rate in flag leaves of the drought-stressed Plainsman cv. during grain filling period correlates well with its higher grain yield and prolonged transpiration rate through spikes. The increase in drought factor (DFI and performance (PI indices calculated from variable chlorophyll fluorescence parameters of secondary leaves also showed correlation with higher biomass in the Cappelle cultivar during the biomass accumulation period. However, during the grain filling period, DFI and PI parameters of the flag leaves were higher in the tolerant Plainsman V cultivar and showed correlation with grain yield stability. Our results suggest that overall biomass and grain yield may respond differentially to drought stress in different wheat cultivars and therefore phenotyping for green biomass cannot be used as a general approach to predict grain yield. We also conclude that photosynthetic efficiency of flag and secondary leaves

Line tester analysis of yield and yield related attributed in different sunflower genotypes

International Nuclear Information System (INIS)

Din, S.U.; Khan, M.A.; Usman, K.; Sayal, O.U.

2014-01-01

This paper encompasses the study of line * tester analysis to chalk out genetic implications regarding yield and yield relating components in different genotypes of sunflower. Eight parents (four CMS lines and four restorers) along with their sixteen F1 hybrids were considered and planted in Randomized Complete Block Design (RCBD) replicated thrice at experimental area of Oilseed Research Program, National Agriculture Research Centre (NARC), Islamabad, Pakistan in 2011. Combining ability for some important morphological traits included days to flower initiation, days to flower completion, days to maturity, plant height, head diameter and seed yield plant-1. In this concern general combining ability (GCA), reciprocals combining ability (RCA) and specific combining ability (SCA) for all traits were studied. The GCA and SCA variances due to lines and testers interaction were significant for all the characters. However, the magnitude of GCAs from CMS lines (females) and restorers (pollinators) were higher than the SCA indicating preponderance of additive genes in the expression of all the traits. Among the lines, CMS-HA-54 whereas in testers, RHP-71, by manifesting maximum GCA effects were considered as the best general combiners for almost all the traits indicating the presence of more additive gene effects in these parents, therefore may serve as potential parents for hybridization and to improve the characters studied. Among the F1 hybrids, CMS HA-99 * RHP-76 (1.54, 212.65) and CMS HA-101 * RHP-73 (0.91, 432.73) were found as the best specific combiners for head or capitulum and seed yield. Hence, if farming community and researchers include these hybrids in their selection and hybridization program for the trait under study optimum result may be obtained. (author)

Аbоut a theoretical yield of glucose from starch

Directory of Open Access Journals (Sweden)

V. V. Ananskikh

2016-01-01

Full Text Available Starch is the raw materials for production of crystal food glucose. With at enzyme conversion of the high purity starch, it is possible to receive glucosic syrups of a glucose equivalent (GE 98%, where there is about 95% glucose and maltose and maltotriose – of about 5%. Starch hydrolysis is carried out with a gain of solids. Thus, 100 kg of amylum is possible to give up to 109.81 kg of glucose syrup on dry basis. Taking in account the losses at manufacture steps a yield can decrease to 105.61 kg. The purified glucose syrup is concentrated up to 73–75% of dry matters and goes to a crystallization step. Crystallization of glucose is carried out in a supersaturated solution within 56–70 hours at reduced temperature from 46–48 °C to 24–26 °C, resulting a mixture of glucose crystals and an intercrystal run-off syrup called a massecuite. The crystallization process is stopped when a 50% of crystals content in massecuite is reached. At the same time glucose yield will be 105.61/2 = 52.8%. Crystallization is carried out according to the single-stage scheme, with partial return of the end product – hydrol into the hydrolised syrup. Then the massecuite is sent to a centrifugation step for dividing glucose crystals and a run-off syrup, which is partially returned to the initial syrup to reduce in GE. The second part of the run-off syrup goes to realization. It must be kept in mind: the higher GE of the glucose syrup sent to a crystallization step, the more quantity of a hydrol is possible to be returned to hydrolysed syrup. Therefore, it is in a resulted a higher yield of glucose crystals. On the basis of the carried-out calculations the computer program was made with which it is possible to define a theoretical glucose and a hydrol yield, while changing values of a hydrolysed syrup. The higher GE values of a hydrolysed syrup are the higher yield of crystal glucose and the lower one of hydrol are. So, at 98% GE of a hydrolysed syrup it is

Colored plastic mulch microclimates affect strawberry fruit yield and quality.

Science.gov (United States)

Shiukhy, Saeid; Raeini-Sarjaz, Mahmoud; Chalavi, Vida

2015-08-01

Significant reduction of strawberry (Fragaria × ananassa, Duch.) fruit yield and quality, as a consequence of conventional cultivation method, is common in the Caspian Sea region, Iran. Recently, growers started using plastic mulches to overcome these shortcomings. Plastic mulches have different thermal and radiation properties and could affect strawberry fruit yield and quality. In the present study, the effect of different colored plastic mulches (black, red, and white) along with conventional practice was tested on yield and quality of strawberry Camarosa cultivar, in a completely randomized block design. Colored plastic mulches had highly significant effect on fruit weight, size, and phytochemical contents. In the most harvest times, mean fruit weight was significantly higher in red plastic relative to white and control treatments. Total fruit weight of plastic mulches was not significantly different, while all were statistically higher than that of control. Fruit size significantly increased over red plastic mulch. Total fruit numbers over plastic mulches were significantly higher than that of control treatment. The content of phenolic compounds was similar between treatments, while anthocyanin content, IC(50) value, and flavonoid content significantly were affected by colored plastics. In conclusion, colored plastic mulches could affect strawberry fruit weight and quality through altering strawberry thermal and radiation environment.

Enhanced yield of phenolic extracts from banana peels (Musa acuminata Colla AAA) and cinnamon barks (Cinnamomum varum) and their antioxidative potentials in fish oil.

Science.gov (United States)

Anal, Anil Kumar; Jaisanti, Sirorat; Noomhorm, Athapol

2014-10-01

The bioactive compounds of banana peels and cinnamon barks were extracted by vacuum microwave and ultrasonic-assisted extraction methods at pre-determined temperatures and times. These methods enhance the yield extracts in shorter time. The highest yields of both extracts were obtained from the conditions which employed the highest temperature and the longest time. The extracts' yield from cinnamon bark method was higher by ultrasonic than vacuum microwave method, while vacuum microwave method gave higher extraction yield from banana peel than ultrasonic method. The phenolic contents of cinnamon bark and banana peel extracts were 467 and 35 mg gallic acid equivalent/g extract, respectively. The flavonoid content found in banana peel and cinnamon bark extracts were 196 and 428 mg/g quercetin equivalent, respectively. In addition, it was found that cinnamon bark gave higher 2,2-Diphenyl-1-1 picryhydrazyl (DPPH) radical scavenging activity and total antioxidant activity (TAA). The antioxidant activity of the extracts was analyzed by measuring the peroxide and p-anisidine values after oxidation of fish oils, stored for a month (30 days) at 25 °C and showed lesser peroxide and p-anisidine values in the fish oils containing the sample extracts in comparison to the fish oil without containing any extract. The banana peel and cinnamon extracts had shown the ability as antioxidants to prevent the oxidation of fish oil and might be considered as rich sources of natural antioxidant.

Sensitivity of CERES-Maize yield simulation to the selected weather data

International Nuclear Information System (INIS)

Zalud, Z.; Stastna, M.

2000-01-01

Sensitivity analysis of selected weather data runs after successful parametrization and validation of the CERES-Maize simulation model. Estimation of the potential yield has been carried out during the long term experiment (1980-1997) as well as the estimation of influence of meteorological parameters on the simulation results for the water-limited yield. 10 % under and over stimulation of global radiation and precipitation as well as increasing and decreasing temperature by 1 deg C on simulated potential and water-limited yield have been done. In most of the years, air temperature underestimation resulted in a higher simulated grain yield and overstimulation shown a lower yield for water limited level. Overestimation of precipitation during wet days in growing period of the maize leads to an increase of amount of water available for the plant and to increase the yield. Underestimation of global radiation by 10 % resulted in a decline in simulated grain yield from -8.8 to -9.9 %. The overestimation caused increase of the yield from 7.8 to 10 %. Overestimation by 10 % resulted in a slight underestimation of the yield in low yielding years and underestimation of global radiation by 10 % in overestimation of the yield. The effect was opposite in high yielding years

Effects of irrigation regime and salinity on soil characteristics and yield of tomato

Directory of Open Access Journals (Sweden)

Rita Leogrande

2012-03-01

Full Text Available A field experiment was conducted in Mediterranean conditions to evaluate the effects of different irrigation volumes and water quality on yield performance of tomato crop. The tomato crop was irrigated re-establishing 50 (I1, 75 (I2 and 100% (I3 of the crop evapotranspiration (ETc with two water quality: fresh water with EC 0.9 dS m-1 (FW and saline water with EC 6 dSm-1 (SW. At harvest, total and marketable yield, weight, number, , total soluble solids (TSS and dry matter of fruit were calculated, The results showed no statistical differences among the three different irrigation volumes on tomato yield and quality. The salinity treatment did not affect yield, probably because the soil salinity in the root zone on average remained below the threshold of tomato salt tolerance. Instead, salinity improved fruit quality parameters as dry matter and TSS by 13 and 8 %, respectively. After the first field application of saline water, soil saturated extract cations (SSEC, electrical conductivity of soil paste extract (ECe, sodium absorption ratio (SAR and exchangeable sodium percentage (ESP cations increased; the largest increase of cations, in particular of Na, occurred in the top layer. At the end of the experiment, the absolute value of SSEC, ECe and SAR, for all the effects studied, were lower than those recorded in 2007. This behavior was suitable to the reduced volumes of treatments administered in 2009 in respect to the 2007. Furthermore, the higher total rainfall recorded in 2009 increased the leaching and downward movement of salts out of the sampling depth.

Whey cheese: membrane technology to increase yields.

Science.gov (United States)

Riera, Francisco; González, Pablo; Muro, Claudia

2016-02-01

Sweet cheese whey has been used to obtain whey cheese without the addition of milk. Pre-treated whey was concentrated by nanofiltration (NF) at different concentration ratios (2, 2.5 and 2.8) or by reverse osmosis (RO) (2-3 times). After the concentration, whey was acidified with lactic acid until a final pH of 4.6-4.8, and heated to temperatures between 85 and 90 °C. The coagulated fraction (supernatant) was collected and freely drained over 4 h. The cheese-whey yield and protein, fat, lactose and ash recoveries in the final product were calculated. The membrane pre-concentration step caused an increase in the whey-cheese yield. The final composition of products was compared with traditional cheese-whey manufacture products (without membrane concentration). Final cheese yields found were to be between 5 and 19.6%, which are higher than those achieved using the traditional 'Requesón' process.

PERFORMANCE OF YIELD AND YIELD CONTRIBUTING CHARACTERISTICS OF BC2F3 POPULATION WITH ADDITION OF BLAST RESISTANT GENE

Directory of Open Access Journals (Sweden)

Muhammad Mahmudul Hasan

2015-10-01

Full Text Available ABSTRACTThe study was carried out in the University Putra Malaysia (UPM Rice Research Centre to evaluate the yield performance of newly developed selected blast resistant plants of BC2F3 generations derived from a cross between MR263, a high yielding rice variety but blast susceptible and Pongsu Seribu 1, donor with blast resistant (Pi-7(tand Pi-d (t1, Pir2-3(tgenes and qLN2 QTL, Malaysian local variety. On the basis of assessed traits, the plants 12, 6, 7, 5, 21, 22, 5, 26, 11, 8, 10, 13 and 15 had the higher yield, blast resistant and good morphological traits. More than 70% heritability was found in days to maturity, plant height, tiller numbers per hill, and panicle per hill, 80% heritability was found in filled grain and yield per hill and more than 90% heritability was found in grain length, grain width and seed weight. Cluster analysis based on the traits grouped 30 plants along with MR263 into seven clusters. According to PCA, the first four principal components account for about 69.3% total variation for all measured traits and exhibited high correlation among the characteristics analyzed.

Phosphorescence quantum yield determination with time-gated fluorimeter and Tb(III)-acetylacetonate as luminescence reference

Energy Technology Data Exchange (ETDEWEB)

Penzkofer, A., E-mail: alfons.penzkofer@physik.uni-regensburg.de [Fakultät für Physik, Universität Regensburg, Universitätsstrasse 31, D-93053 Regensburg (Germany)

2013-03-29

Highlights: ► Procedure for absolute phosphorescence quantum yield measurement is described. ► Experimental setup for absolute luminescence quantum yield standard calibration. ► Tb(acac){sub 3} proposed as phosphorescence quantum yield reference standard. ► Luminescence quantum yield of Tb(acac){sub 3} in cyclohexane measured. ► Luminescence lifetime of Tb(acac){sub 3} in cyclohexane measured. - Abstract: Phosphorescence quantum yield measurements of fluorescent and phosphorescent samples require the use of time-gated fluorimeters in order to discriminate against the fluorescence contribution. As reference standard a non-fluorescent luminescent compound is needed for absolute phosphorescence quantum yield determination. For this purpose the luminescence behavior of the rare earth chelate terbium(III)-acetylacetonate (Tb(acac){sub 3}) was studied (determination of luminescence quantum yield and luminescence lifetime). The luminescence quantum yield of Tb(acac){sub 3} was determined by using an external light source and operating the fluorimeter in chemo/bioluminescence mode with a fluorescent dye (rhodamine 6G in methanol) as reference standard. A procedure is developed for absolute luminescence (phosphorescence) quantum yield determination of samples under investigation with a time-gated fluorimeter using a non-fluorescent luminescent compound of known luminescence quantum yield and luminescence lifetime.

A high throughput DNA extraction method with high yield and quality

Directory of Open Access Journals (Sweden)

Xin Zhanguo

2012-07-01

Full Text Available Abstract Background Preparation of large quantity and high quality genomic DNA from a large number of plant samples is a major bottleneck for most genetic and genomic analyses, such as, genetic mapping, TILLING (Targeting Induced Local Lesion IN Genome, and next-generation sequencing directly from sheared genomic DNA. A variety of DNA preparation methods and commercial kits are available. However, they are either low throughput, low yield, or costly. Here, we describe a method for high throughput genomic DNA isolation from sorghum [Sorghum bicolor (L. Moench] leaves and dry seeds with high yield, high quality, and affordable cost. Results We developed a high throughput DNA isolation method by combining a high yield CTAB extraction method with an improved cleanup procedure based on MagAttract kit. The method yielded large quantity and high quality DNA from both lyophilized sorghum leaves and dry seeds. The DNA yield was improved by nearly 30 fold with 4 times less consumption of MagAttract beads. The method can also be used in other plant species, including cotton leaves and pine needles. Conclusion A high throughput system for DNA extraction from sorghum leaves and seeds was developed and validated. The main advantages of the method are low cost, high yield, high quality, and high throughput. One person can process two 96-well plates in a working day at a cost of $0.10 per sample of magnetic beads plus other consumables that other methods will also need.

Temporal changes in climatic variables and their impact on crop yields in southwestern China.

Science.gov (United States)

Liu, Hong-Bin; Gou, Yu; Wang, Hong-Ye; Li, Hong-Mei; Wu, Wei

2014-08-01

Knowledge of variability in climatic variables changes and its impact on crop yields is important for farmers and policy makers, especially in southwestern China where rainfed agriculture is dominant. In the current study, six climatic parameters (mean temperature, rainfall, relative humidity, sunshine hours, temperature difference, and rainy days) and aggregated yields of three main crops (rice: Oryza sativa L., oilseed rape: Brassica napus L., and tobacco: Nicotiana tabacum L.) during 1985-2010 were collected and analyzed for Chongqing-a large agricultural municipality of China. Climatic variables changes were detected by Mann-Kendall test. Increased mean temperature and temperature difference and decreased relative humidity were found in annual and oilseed rape growth time series (Pchanges in climatic variables in this region. Yield of rice increased with rainfall (Pclimatic variables to crop yields. Temperature difference and sunshine hours had higher direct and indirect effects via other climatic variables on yields of rice and tobacco. Mean temperature, relative humidity, rainy days, and temperature difference had higher direct and indirect effects via others on yield of oilseed rape.

Perilymph sampling from the cochlear apex: a reliable method to obtain higher purity perilymph samples from scala tympani.

Science.gov (United States)

Salt, Alec N; Hale, Shane A; Plonkte, Stefan K R

2006-05-15

Measurements of drug levels in the fluids of the inner ear are required to establish kinetic parameters and to determine the influence of specific local delivery protocols. For most substances, this requires cochlear fluids samples to be obtained for analysis. When auditory function is of primary interest, the drug level in the perilymph of scala tympani (ST) is most relevant, since drug in this scala has ready access to the auditory sensory cells. In many prior studies, ST perilymph samples have been obtained from the basal turn, either by aspiration through the round window membrane (RWM) or through an opening in the bony wall. A number of studies have demonstrated that such samples are likely to be contaminated with cerebrospinal fluid (CSF). CSF enters the basal turn of ST through the cochlear aqueduct when the bony capsule is perforated or when fluid is aspirated. The degree of sample contamination has, however, not been widely appreciated. Recent studies have shown that perilymph samples taken through the round window membrane are highly contaminated with CSF, with samples greater than 2microL in volume containing more CSF than perilymph. In spite of this knowledge, many groups continue to sample from the base of the cochlea, as it is a well-established method. We have developed an alternative, technically simple method to increase the proportion of ST perilymph in a fluid sample. The sample is taken from the apex of the cochlea, a site that is distant from the cochlear aqueduct. A previous problem with sampling through a perforation in the bone was that the native perilymph rapidly leaked out driven by CSF pressure and was lost to the middle ear space. We therefore developed a procedure to collect all the fluid that emerged from the perforated apex after perforation. We evaluated the method using a marker ion trimethylphenylammonium (TMPA). TMPA was applied to the perilymph of guinea pigs either by RW irrigation or by microinjection into the apical turn. The

Near-Infrared Spectroscopy Combined with Multivariate Calibration to Predict the Yield of Sesame Oil Produced by Traditional Aqueous Extraction Process

Directory of Open Access Journals (Sweden)

Yong-Dong Xu

2017-01-01

Full Text Available Sesame oil produced by the traditional aqueous extraction process (TAEP has been recognized by its pleasant flavor and high nutrition value. This paper developed a rapid and nondestructive method to predict the sesame oil yield by TAEP using near-infrared (NIR spectroscopy. A collection of 145 sesame seed samples was measured by NIR spectroscopy and the relationship between the TAEP oil yield and the spectra was modeled by least-squares support vector machine (LS-SVM. Smoothing, taking second derivatives (D2, and standard normal variate (SNV transformation were performed to remove the unwanted variations in the raw spectra. The results indicated that D2-LS-SVM (4000–9000 cm−1 obtained the most accurate calibration model with root mean square error of prediction (RMSEP of 1.15 (%, w/w. Moreover, the RMSEP was not significantly influenced by different initial values of LS-SVM parameters. The calibration model could be helpful to search for sesame seeds with higher TAEP oil yields.

Maximum credibly yield for deuteriuim-filled double shell imaging targets meeting requirements for yield bin Category A

Energy Technology Data Exchange (ETDEWEB)

Wilson, Douglas Carl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Loomis, Eric Nicholas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-17

We are anticipating our first NIF double shell shot using an aluminum ablator and a glass inner shell filled with deuterium shown in figure 1. The expected yield is between a few 10¹⁰ to a few 10¹¹ dd neutrons. The maximum credible yield is 5e+13. This memo describes why, and what would be expected with variations on the target. This memo evaluates the maximum credible yield for deuterium filled double shell capsule targets with an aluminum ablator shell and a glass inner shell in yield Category A (< 10¹⁴ neutrons). It also pertains to fills of gas diluted with hydrogen, helium (³He or ⁴He), or any other fuel except tritium. This memo does not apply to lower z ablator dopants, such as beryllium, as this would increase the ablation efficiency. This evaluation is for 5.75 scale hohlraum targets of either gold or uranium with helium gas fills with density between 0 and 1.6 mg/cc. It could be extended to other hohlraum sizes and shapes with slight modifications. At present only laser pulse energies up to 1.5 MJ were considered with a single step laser pulse of arbitrary shape. Since yield decreases with laser energy for this target, the memo could be extended to higher laser energies if desired. These maximum laser parameters of pulses addressed here are near the edge of NIF’s capability, and constitute the operating envelope for experiments covered by this memo. We have not considered multiple step pulses, would probably create no advantages in performance, and are not planned for double shell capsules. The main target variables are summarized in Table 1 and explained in detail in the memo. Predicted neutron yields are based on 1D and 2D clean simulations.

Influence of yield surface curvature on the macroscopic yielding and ductile failure of isotropic porous plastic materials

Science.gov (United States)

Dæhli, Lars Edvard Bryhni; Morin, David; Børvik, Tore; Hopperstad, Odd Sture

2017-10-01

Numerical unit cell models of an approximative representative volume element for a porous ductile solid are utilized to investigate differences in the mechanical response between a quadratic and a non-quadratic matrix yield surface. A Hershey equivalent stress measure with two distinct values of the yield surface exponent is employed as the matrix description. Results from the unit cell calculations are further used to calibrate a heuristic extension of the Gurson model which incorporates effects of the third deviatoric stress invariant. An assessment of the porous plasticity model reveals its ability to describe the unit cell response to some extent, however underestimating the effect of the Lode parameter for the lower triaxiality ratios imposed in this study when compared to unit cell simulations. Ductile failure predictions by means of finite element simulations using a unit cell model that resembles an imperfection band are then conducted to examine how the non-quadratic matrix yield surface influences the failure strain as compared to the quadratic matrix yield surface. Further, strain localization predictions based on bifurcation analyses and imperfection band analyses are undertaken using the calibrated porous plasticity model. These simulations are then compared to the unit cell calculations in order to elucidate the differences between the various modelling strategies. The current study reveals that strain localization analyses using an imperfection band model and a spatially discretized unit cell are in reasonable agreement, while the bifurcation analyses predict higher strain levels at localization. Imperfection band analyses are finally used to calculate failure loci for the quadratic and the non-quadratic matrix yield surface under a wide range of loading conditions. The underlying matrix yield surface is demonstrated to have a pronounced influence on the onset of strain localization.

Impact of organic and inorganic fertilizers on growth, fruit yield ...

African Journals Online (AJOL)

Fruit yield obtained with Ogbomoso local was 45 and 56% higher than what was obtained for Roma VF and Califonia wonder, respectively. In terms of vitamin C content, Roma VF fertilized with 50% NPK + 50% TC gave the highest value which is 23 to 67% higher than values obtained from the other treatment combinations.

Calculated secondary yields for proton broadband using DECAY TURTLE

International Nuclear Information System (INIS)

Sondgeroth, A.

1995-02-01

The calculations for the yields were done by Al Sondgeroth and Anthony Malensek. The authors used the DECAY deck called PBSEC E.DAT from the CMS DECKS library. After obtaining the run modes and calibration modes from the liaison physicist, they made individual decay runs, using DECAY TURTLE from the CMS libraries and a production spectrum subroutine which was modified by Anthony, for each particle and decay mode for all particle types coming out of the target box. Results were weighted according to branching ratios for particles with more than one decay mode. The production spectra were produced assuming beryllium as the target. The optional deuterium target available to broadband will produce slightly higher yields. It should be noted that they did not include pion yields from klong decays because they could not simulate three body decays. Pions from klongs would add a very small fraction to the total yield

Evaluation of Yield, Yield Components and Essential Oil Content of Marigold (Calendula officinalis L. with the Use of Nitrogen and Vermicompost

Directory of Open Access Journals (Sweden)

Alireza Pazoki

2016-10-01

Full Text Available Environmenal problems resulting from application of nitrogen fertilizers in the production plant materials led agricultural specialists to use clean and alternative methods to towards the organic farming and use of organic fertilizers. In this study, thus, the effect of nitrogen and vermicompost fertilizer rates on yield, yield components, essential oil content and some morphological traits of marigold was studied in a split plot experiment based on completely randomized blocks design with 3 replications in Shahr-e-Rey region during 2013 growing season. Nitrogen rates with 3 levels (0, 60, 120 and 180 kg.ha-1 were assigned to main plots and vermicompost with 3 levels (0, 10, and 20 t.ha-1 to the sub plots. Mean comparison of simple effects indicated that the plants treated with 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 organic fertilizer vermicompost produced higher trait values under study than control (non application of vermincompost. Interaction effect of experimented factors was significant on all traits under evaluation. Thus, highest seed yield (1567 kg.ha-1, biological yield (6664 kg.ha-1 and essential oil yield (8.85 kg.ha-1 obtained by the application of 120 kg.ha-1 nitrogen fertilizer and 20 t.ha-1 varmicompost. Based on the results obtained it could be said that nitrogen and vermicompost may improve seed and biological yield and yield components of marigold.

Spot sputum samples are at least as good as early morning samples for identifying Mycobacterium tuberculosis.

Science.gov (United States)

Murphy, Michael E; Phillips, Patrick P J; Mendel, Carl M; Bongard, Emily; Bateson, Anna L C; Hunt, Robert; Murthy, Saraswathi; Singh, Kasha P; Brown, Michael; Crook, Angela M; Nunn, Andrew J; Meredith, Sarah K; Lipman, Marc; McHugh, Timothy D; Gillespie, Stephen H

2017-10-27

The use of early morning sputum samples (EMS) to diagnose tuberculosis (TB) can result in treatment delay given the need for the patient to return to the clinic with the EMS, increasing the chance of patients being lost during their diagnostic workup. However, there is little evidence to support the superiority of EMS over spot sputum samples. In this new analysis of the REMoxTB study, we compare the diagnostic accuracy of EMS with spot samples for identifying Mycobacterium tuberculosis pre- and post-treatment. Patients who were smear positive at screening were enrolled into the study. Paired sputum samples (one EMS and one spot) were collected at each trial visit pre- and post-treatment. Microscopy and culture on solid LJ and liquid MGIT media were performed on all samples; those missing corresponding paired results were excluded from the analyses. Data from 1115 pre- and 2995 post-treatment paired samples from 1931 patients enrolled in the REMoxTB study were analysed. Patients were recruited from South Africa (47%), East Africa (21%), India (20%), Asia (11%), and North America (1%); 70% were male, median age 31 years (IQR 24-41), 139 (7%) co-infected with HIV with a median CD4 cell count of 399 cells/μL (IQR 318-535). Pre-treatment spot samples had a higher yield of positive Ziehl-Neelsen smears (98% vs. 97%, P = 0.02) and LJ cultures (87% vs. 82%, P = 0.006) than EMS, but there was no difference for positivity by MGIT (93% vs. 95%, P = 0.18). Contaminated and false-positive MGIT were found more often with EMS rather than spot samples. Surprisingly, pre-treatment EMS had a higher smear grading and shorter time-to-positivity, by 1 day, than spot samples in MGIT culture (4.5 vs. 5.5 days, P spot samples in those with unfavourable outcomes, there were no differences in smear or culture results, and positive results were not detected earlier in Kaplan-Meier analyses in either EMS or spot samples. Our data do not support the hypothesis that EMS

The yield of different pleural fluid volumes for Mycobacterium tuberculosis culture.

Science.gov (United States)

von Groote-Bidlingmaier, Florian; Koegelenberg, Coenraad Frederik; Bolliger, Chris T; Chung, Pui Khi; Rautenbach, Cornelia; Wasserman, Elizabeth; Bernasconi, Maurizio; Friedrich, Sven Olaf; Diacon, Andreas Henri

2013-03-01

We prospectively compared the culture yields of two pleural fluid volumes (5 and 100 ml) inoculated in liquid culture medium in 77 patients of whom 58 (75.3%) were diagnosed with pleural tuberculosis. The overall fluid culture yield was high (60.3% of cases with pleural tuberculosis). The larger volume had a faster time to positivity (329 vs 376 h, p=0.055) but its yield was not significantly higher (53.5% vs 50%; p=0.75). HIV-positive patients were more likely to have positive cultures (78.9% vs 51.5%; p=0.002).

Effect of tillage fertilizer treatments on maize fodder yield under rainfed conditions of Pakistan

International Nuclear Information System (INIS)

Khaliq, P.; Cheema, N.M.; Malik, M.A.

2012-01-01

The effect of deep and shallow tillage and fertilizer treatments i.e., recommended dose of fertilizer (RF), farm yard manure (FYM) and recommended dose of fertilizer plus farmyard manure (RF+FYM) on maize fodder yield was studied under rainfed conditions of Pakistan. It was observed that the emergence count m-2, maize fodder biomass, plant height, number of leaves per plant and maize fodder yield enhanced, with the application of RF+FYM. However, the effect of FYM+RF and recommended dose of fertilizer was statistically non-significant and on average basis RF+FYM treatment produced higher green fodder (19971.5 kg ha/sup -1/) than fodder yield of 18349.1 kg ha/sup -1/ produced by applying recommended dose of fertilizer. However, green fodder yield produced with these two fertilizer treatments were significantly higher than that of the FYM and control treatments. The FYM treatment gave lowest fodder yield (16997 kg ha/sup -1/) and was significantly lower than the fodder yield (17278.7 kg ha/sup -1/) obtained in control treatment. The nutrient availability in RF+FYM treatment significantly increased the biomass production, however, application of FYM promoted the weed infestation that reduced the green fodder yield of maize, but it improved the overall forage yield as recorded in RF+FYM treatment. The effect of deep tillage on maize fodder yield was non-significant. (author)

Thermal decomposition of expanded polystyrene in a pebble bed reactor to get higher liquid fraction yield at low temperatures

International Nuclear Information System (INIS)

Chauhan, R.S.; Gopinath, S.; Razdan, P.; Delattre, C.; Nirmala, G.S.; Natarajan, R.

2008-01-01

Expanded polystyrene is one of the polymers produced in large quantities due to its versatile application in different fields. This polymer is one of the most intractable components in municipal solid waste. Disposal of polymeric material by pyrolysis or catalytic cracking yields valuable hydrocarbon fuels or monomers. Literature reports different types of reactors and arrangements that have uniform temperatures during pyrolysis and catalytic cracking. The present study focuses on reducing the temperature to maximize the quantity of styrene monomer in the liquid product. A bench scale reactor has been developed to recover the styrene monomer and other valuable chemicals. Experiments were carried under partial oxidation and vacuum conditions in the temperature range of 300-500 deg. C. In the pyrolysis optimization studies, the best atmospheric condition was determined to be vacuum, the pyrolysis temperature should be 500 deg. C, yield of liquid product obtained was 91.7% and yield of styrene obtained was 85.5%. In the characterization studies, distillation and IR spectroscopy experiments were carried out. The remaining of the liquid product comprises of benzene, ethyl benzene, and styrene dimers and trimers

Yield Mapping in Salix; Skoerdekartering av salix

Energy Technology Data Exchange (ETDEWEB)

Anderson, Christoffer; Gilbertsson, Mikael; Rogstrand, Gustav; Thylen, Lars

2004-09-01

The most common species for energy forest production is willow. Willow is able to produce a large amount of biomass in a short period of time. Growing willow has a potential to render a good financial result for the farmer if cultivated on fields with the right conditions and plenty of water. Under the right conditions growing willow can give the farmer a net income of 3,000 SEK (about 430 USD) per hectare and year, which is something that common cereal crops cannot compete with. However, this is not the common case since willow is often grown as a substitute crop on fields where cereal crop yield is low. The aim of this study was to reveal if it is possible to measure yield variability in willow, and if it is possible to describe the reasons for yield variation both within the field but also between different fields. Yield mapping has been used in conventional farming for about a decade. The principles for yield mapping are to continuously measure the yield while registering location by the use of GPS when harvesting the field. The collected data is then used to search for spatial variations within the field, and to try to understand the reasons for this variation. Since there is currently no commercial equipment for yield mapping in willow, a yield mapping system had to be developed within this project. The new system was installed on a Claas Jaguar harvester. The principle for yield mapping on the Claas Jaguar harvester is to measure the distance between the feeding rollers. This distance is correlated to the flow through the harvester. The speed and position of the machine was registered using GPS. Knowing the working width of the harvester this information was used to calculate the yield. All collected data was stored on a PDA computer. Soil samples were also collected from the yield mapped fields. This was to be able to test yield against both physical and chemical soil parameters. The result shows that it is possible to measure spatial variations of yield in

The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

Directory of Open Access Journals (Sweden)

A Ardakani

2016-12-01

flowering (25P+25V+50F, and 25% at planting+50% at vegetative stage and 25%at early boll development (25P+50V+25B as the subplot. The seeds planted had been acid-delinted and treated with chemicals against seed and seedling diseases. Plots consisted of six rows spaced 0.5 min row and 0.2 m in plant (10 plants m-2 and 6 m in length. To evaluate yield components of cotton including plant height, sympodial branch number, boll number, boll weight, 10 individual plants were selected randomly from final harvest area. At harvesting time one meter square from the beginning and a half meter around each plot was removed as a marginal effect. The remaining area was harvested by hand for determine of lint and biological yield. Seed-cotton samples were ginned to separate the fiber (lint from the seed. Lint percentage (% was calculated as the weight of lint to weight of the seed-cotton. The statistical analyses were performed by SAS software Ver. 9.1. The mean separation was done through Fischer least significant difference (FLSD test at alpha 0.05. Results and Discussion Analysis of variance showed that boll weight, seed cotton yield and biological yield were significantly affected by potassium rate, whereas plant height, number of sympodial branch, boll number and lint percentage was not affected by potassium rate. All traits were affected by potassium application method except plant height and lint percentage. Plant height, boll weight, seed cotton yield and lint percentage were affected by interaction of potassium rate and application method. Increasing of K level up to 150 kg ha-1 increased boll weight (23.64%, seed cotton yield (17.67%, and biological yield (9.86% in comparison with the application of 75 kg ha-1. Plant height, sympodial branch number and lint percentage did not respond to K rate. K application as 25% at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+25B had the highest boll weight, seed

Breeding high yielding varieties of pigeon pea, mungbean and black gram using induced mutations

International Nuclear Information System (INIS)

Pawar, S.E.; Wanjari, K.B.

1994-01-01

The present communication emphasis the developing of high yielding varieties of pigeon pea, mungbean and black gram using induced mutation with disease resistance in these crops. This would help in stabilisation of the higher yield potential

EFFECT OF BODY CONDITION AND SEASON ON THE YIELD AND QUALITY OF CATTLE EMBRYOS

Directory of Open Access Journals (Sweden)

Elena Kubovičová

2013-02-01

Full Text Available Unsatisfactory reproductive performance in dairy cows has been associated with environmental influences, such as season, chronic and acute changes in dietary intake and body composition. These factors can affect fertility especially ovarian function and yield and quality of oocytes and embryos. In our study the cow ´s body condition affected the overall embryo recovery rate (proportion of collected embryos to palpated corpora lutea. The significantly higher number of embryos was collected from cows with BCS 2.5- 2.75 (68.32 % embryo recovery rate and 3.0- 3.25 (63.30 % compared to the cows with BCS 2.0-2.25 (53.33% and 3.5-4.0 (47.87%; P0.05. On the contrary, the yield of transferable embryos was higher (P<0.05 during the autumn months (78.94% compared to spring (58.38% or summer (60.00% months. In conclusion, body condition and season may affect the yield and quality of bovine embryos. Higher embryo yield was recorded in average BCS (2.5-3.25 cows, whilst most transferable embryos were obtained in the higher BCS (3.5-4.0. Our results indicate that the best season for collection of transferable bovine embryos is autumn.

Calibrating passive sampling and passive dosing techniques to lipid based concentrations

DEFF Research Database (Denmark)

Mayer, Philipp; Schmidt, Stine Nørgaard; Annika, A.

2011-01-01

Equilibrium sampling into various formats of the silicone polydimethylsiloxane (PDMS) is increasingly used to measure the exposure of hydrophobic organic chemicals in environmental matrices, and passive dosing from silicone is increasingly used to control and maintain their exposure in laboratory...... coated vials and with Head Space Solid Phase Microextraction (HS-SPME) yielded lipid based concentrations that were in good agreement with each other, but about a factor of two higher than measured lipid-normalized concentrations in the organisms. Passive dosing was applied to bioconcentration...

Reported credibility techniques in higher education evaluation studies that use qualitative methods: A research synthesis.

Science.gov (United States)

Liao, Hongjing; Hitchcock, John

2018-06-01

This synthesis study examined the reported use of credibility techniques in higher education evaluation articles that use qualitative methods. The sample included 118 articles published in six leading higher education evaluation journals from 2003 to 2012. Mixed methods approaches were used to identify key credibility techniques reported across the articles, document the frequency of these techniques, and describe their use and properties. Two broad sets of techniques were of interest: primary design techniques (i.e., basic), such as sampling/participant recruitment strategies, data collection methods, analytic details, and additional qualitative credibility techniques (e.g., member checking, negative case analyses, peer debriefing). The majority of evaluation articles reported use of primary techniques although there was wide variation in the amount of supporting detail; most of the articles did not describe the use of additional credibility techniques. This suggests that editors of evaluation journals should encourage the reporting of qualitative design details and authors should develop strategies yielding fuller methodological description. Copyright © 2018 Elsevier Ltd. All rights reserved.

Estimating yield gaps at the cropping system level.

Science.gov (United States)

Guilpart, Nicolas; Grassini, Patricio; Sadras, Victor O; Timsina, Jagadish; Cassman, Kenneth G

2017-05-01

Yield gap analyses of individual crops have been used to estimate opportunities for increasing crop production at local to global scales, thus providing information crucial to food security. However, increases in crop production can also be achieved by improving cropping system yield through modification of spatial and temporal arrangement of individual crops. In this paper we define the cropping system yield potential as the output from the combination of crops that gives the highest energy yield per unit of land and time, and the cropping system yield gap as the difference between actual energy yield of an existing cropping system and the cropping system yield potential. Then, we provide a framework to identify alternative cropping systems which can be evaluated against the current ones. A proof-of-concept is provided with irrigated rice-maize systems at four locations in Bangladesh that represent a range of climatic conditions in that country. The proposed framework identified (i) realistic alternative cropping systems at each location, and (ii) two locations where expected improvements in crop production from changes in cropping intensity (number of crops per year) were 43% to 64% higher than from improving the management of individual crops within the current cropping systems. The proposed framework provides a tool to help assess food production capacity of new systems ( e.g. with increased cropping intensity) arising from climate change, and assess resource requirements (water and N) and associated environmental footprint per unit of land and production of these new systems. By expanding yield gap analysis from individual crops to the cropping system level and applying it to new systems, this framework could also be helpful to bridge the gap between yield gap analysis and cropping/farming system design.

Stock density and fruit yield of African walnut, Plukenetia conophora Mull-Arg (Syn. Tetracarpidium conophorum in tropical lowland rainforests of southwest Nigeria

Directory of Open Access Journals (Sweden)

TO Amusa

2014-12-01

Full Text Available Despite the huge socio-economic potentials of the African walnut, Plukenetia conophora Mull-Arg, there is a dearth of information on stock density and yield studies under different site conditions. Therefore, this study was carried out to investigate the stock density and fruit yields of P. conophora in three different habitats (i.e. less disturbed natural forest, recently disturbed natural forest and plantation forest within Omo Forest Reserve (OFR and Shasha Forest Reserve (SFR of Nigeria. Stratified random sampling technique was used to carry out inventory survey. Fruit yields were determined by collecting fruit falls through double sampling approach. Both descriptive and inferential statistics were used in analyzing the data at P = 0.05. Stock densities of P. conophora were 5.33+1.7stands/ha, 14.67+2.05stands/ha and 16.00+2.94stands/ha in OFR, while they were 7.33+0.47stands/ha, 14.67+1.25stands/ha and 10.67+04.7stands/ha in SFR for recently disturbed forest, less disturbed forest and plantation forest respectively. There were significant differences in number and distribution of species by forest types, but not between forest reserves. The mean yield of P. conophora/ha/yr was estimated at 7,800.00kg for OFR and 6,534.00kg for SFR. Yields from plantation area contributed more in OFR, while yields from less disturbed natural forest area were higher in SFR. Yields from recently disturbed natural forest were consistently lower in the two reserves. These results show that P. conophora thrives better in plantation and old re-growth forests. This information is pertinent towards improving the management of the species, increase its productivity and enhance benefits in a more sustainable manner to the rural populace.

Debranching improves morpho-physiological characters, fruit quality and yield of tomato

International Nuclear Information System (INIS)

Mondal, M.M.A.; Razzaque, A.H.M.

2016-01-01

Farmers are commercially cultivated tomato with different levels of shoot pruning but this production practice has not been defined clearly. The experiment was conducted under sub-tropical condition to assess the effect of different levels of debranching on morpho-physiological, reproductive and yield contributing characters in determinate tomato cultivar cv. Binatomato-5. The debranching levels were: i) control, ii) only main stem (MS), iii) MS with 2 branches, iv) MS with 3 branches and v) MS with 4 branches. Based on recommended spacing (50 cm * 50 cm), the higher fruit yield plant-1 as well as fruit yield per hectare were observed in more branch bearing plants of the treatment control (MS with 5-6 branches), MS with 3 branches and MS with 4 branches due to production of higher number of fruits plant-1 with being the highest in MS with 3 branches due to increase fruit size. The lowest fruit yield per plant as well as per hectare was observed in uniculm plants due to lower number of fruits per plant. This study suggests that plants that have MS with three branches may be recommended for commercial cultivation of tomato under sub-tropical condition. (author)

VERMICOMPOST APPLICATION IMPROVING SEMIARID-GROWN CORN GREEN EAR AND GRAIN YIELDS

Directory of Open Access Journals (Sweden)

PAULO SÉRGIO LIMA E SILVA

2017-01-01

Full Text Available Intensive corn farming quickly depletes soil organic matter in the nutrient-poor soils of the Brazilian semiarid region. Application of vermicompost, an excellent organic fertilizer, could help solve that problem. This study evaluated the effect of applying Eisenia fetida vermicompost in the seeding furrows, at 0, 2, 4, 6, 8, and 10 Mg.ha-1 application rates, on the green ear yield and grain yield of two corn cultivars. Treatments were replicated five times with split-plots (vermicompost application rates within plots in a completely randomized block design. The number of mature ears, number of kernels per ear (cultivar BR 106, and 100-kernel weight (cultivar AG 1051 were not affected by vermicompost application rate. However, vermicompost application increased total number and weight of unhusked and husked marketable green ears as well as grain yield. Total number of green ears was higher in cultivar BR 106 than in cultivar AG 1051. Conversely, grain yield and total ear weight and marketable weight of unhusked and husked green ears was higher in cultivar AG 1051, but responses in the latter two traits were dose-dependent.

Grapevine yield components and composition of Isabel grape produced according to the organic and conventional systems

Directory of Open Access Journals (Sweden)

Miele Alberto

2016-01-01

Full Text Available There is an increasing demand for organic grapes by the juice industry of Serra Gaúcha, Brazil. This region presents a humid and hot summer, ideal climatic conditions for the development of a number of diseases. To control such diseases and problems brought about by other organisms, growers apply pesticides on the grapevines which may leave residues in grapes. However, in general, grapes produced by organic system have lower yield, but there is a lack of research data on this subject. Thus, an experiment was carried out over three years in order to compare the yield components and the physicochemical composition of the must of Isabel grapes conducted in both production systems. When the grapes were ripe, variables related to yield components were evaluated, such as the number of clusters/vine, yield/vine and weight/cluster. Then the grapes were sampled and taken to the laboratory where they were crushed and the musts were centrifuged and analyzed. The 3-year data mean were submitted to correlation analysis and Principal Component Analysis. The results show that conventional grapevines produced 2.18 times more than organic. However, the grapes from the organic system had higher density, Brix, pH, Brix/titratable acidity ratio, P and Mg but lower K, and Ca varied little between both production systems.

Tradeoffs between water requirements and yield stability in annual vs. perennial crops

Science.gov (United States)

Vico, Giulia; Brunsell, Nathaniel A.

2018-02-01

Population growth and changes in climate and diets will likely further increase the pressure on agriculture and water resources globally. Currently, staple crops are obtained from annuals plants. A shift towards perennial crops may enhance many ecosystem services, but at the cost of higher water requirements and lower yields. It is still unclear when the advantages of perennial crops overcome their disadvantages and perennial crops are thus a sustainable solution. Here we combine a probabilistic description of the soil water balance and crop development with an extensive dataset of traits of congeneric annuals and perennials to identify the conditions for which perennial crops are more viable than annual ones with reference to yield, yield stability, and effective use of water. We show that the larger and more developed roots of perennial crops allow a better exploitation of soil water resources and a reduction of yield variability with respect to annual species, but their yields remain lower when considering grain crops. Furthermore, perennial crops have higher and more variable irrigation requirements and lower water productivity. These results are important to understand the potential consequences for yield, its stability, and water resource use of a shift from annual to perennial crops and, more generally, if perennial crops may be more resilient than annual crops in the face of climatic fluctuations.

A global water supply reservoir yield model with uncertainty analysis

International Nuclear Information System (INIS)

Kuria, Faith W; Vogel, Richard M

2014-01-01

Understanding the reliability and uncertainty associated with water supply yields derived from surface water reservoirs is central for planning purposes. Using a global dataset of monthly river discharge, we introduce a generalized model for estimating the mean and variance of water supply yield, Y, expected from a reservoir for a prespecified reliability, R, and storage capacity, S assuming a flow record of length n. The generalized storage–reliability–yield (SRY) relationships reported here have numerous water resource applications ranging from preliminary water supply investigations, to economic and climate change impact assessments. An example indicates how our generalized SRY relationship can be combined with a hydroclimatic model to determine the impact of climate change on surface reservoir water supply yields. We also document that the variability of estimates of water supply yield are invariant to characteristics of the reservoir system, including its storage capacity and reliability. Standardized metrics of the variability of water supply yields are shown to depend only on the sample size of the inflows and the statistical characteristics of the inflow series. (paper)

Determinants of bond yield spread changes in South Africa | Radier ...

African Journals Online (AJOL)

This paper offers an emerging market perspective on the determinants of bond yield spread changes. The study covers the period 2005-2013 and it is based on a sample of 106 corporate vanilla bonds listed on the South African market. To capture the impact of the financial crisis of 2007-2008, the sample period is split into ...

MISSE 2 PEACE Polymers Experiment Atomic Oxygen Erosion Yield Error Analysis

Science.gov (United States)

McCarthy, Catherine E.; Banks, Bruce A.; deGroh, Kim, K.

2010-01-01

Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. To address this, 40 different polymer samples and a sample of pyrolytic graphite, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the International Space Station (ISS) for nearly 4 years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2). The purpose of the PEACE Polymers experiment was to obtain accurate mass loss measurements in space to combine with ground measurements in order to accurately calculate the atomic oxygen erosion yields of a wide variety of polymeric materials exposed to the LEO space environment for a long period of time. Error calculations were performed in order to determine the accuracy of the mass measurements and therefore of the erosion yield values. The standard deviation, or error, of each factor was incorporated into the fractional uncertainty of the erosion yield for each of three different situations, depending on the post-flight weighing procedure. The resulting error calculations showed the erosion yield values to be very accurate, with an average error of 3.30 percent.

Yield Stress Reduction of DWPF Melter Feed Slurries

International Nuclear Information System (INIS)

Stone, M.E.; Smith, M.E.

2007-01-01

, then quenched with a water spray. Approximately 90% of the frit was converted to beads by this process. Yield stress reduction was measured by preparing melter feed slurries (using nonradioactive HLW simulants) that contain beads and comparing the yield stress with melter feed containing frit. A second set of tests was performed with beads of various diameters to determine if a decrease in diameter affected the results. Smaller particle size was shown to increase yield stress when frit is utilized. The settling rate of the beads was required to match the settling rate of the frit, therefore a decrease in particle size was anticipated. Settling tests were conducted in water, xanthan gum solutions, and in non-radioactive simulants of the HLW. The tests used time-lapse video-graphy as well as solids sampling to evaluate the settling characteristics of beads compared to frit of the same particle size. A preliminary melt rate evaluation was performed using a dry-fed Melt Rate Furnace (MRF) developed by SRNL. Preliminary evaluation of the impact of beading the frit on the frit addition system were completed by conducting flow loop testing. A recirculation loop was built with a total length of about 30 feet. Pump power, flow rate, outlet pressure, and observations of the flow in the horizontal upper section of the loop were noted. The recirculation flow was then gradually reduced and the above items recorded until settling was noted in the recirculation line. Overall, the data shows that the line pressure increased as the solids were increased for the same flow rate. In addition, the line pressure was higher for Frit 320 than the beads at the same solids level and flow. With the observations, a determination of minimum velocity to prevent settling could be done, but a graph of the line pressures versus velocity for the various tests was deemed to more objective. The graph shows that the inflection point in pressure drop is about the same for the beads and Frit 320. This

Foliar copper uptake by maize plants: effects on growth and yield

Directory of Open Access Journals (Sweden)

Rogério Hidalgo Barbosa

2013-09-01

Full Text Available A slight increase in the levels of a certain nutrient can cause a significant increase in crop yield or can cause phytotoxicity symptoms. Thus, the aim of this study was to evaluate the effect of foliar application of copper (Cu on the growth and yield of DG-501 maize. The experiment was carried out between December 2009 and April 2010 in conventional tillage. When plants were with six to eight leaves, Cu (0, 100, 200, 300, 400, 500 and 600g ha-1 was applied to the leaves. Treatments were arranged in randomized complete block with five replications. When 50% of the plants were in flowering, it was evaluated the plant height, culm diameter, height of the first ear insertion, leaf area, and chlorophyll content. At harvest, it was evaluated diameter and length of the ear, yield and thousand grain weight. There was a linear reduction in the plant height and in the height of the first ear insertion with increasing Cu doses. On the other hand, chlorophyll content, leaf area, diameter and length of ear, thousand grain weight and yield increased at doses up to 100g ha-1 Cu, however, decreased at higher doses. Therefore, foliar Cu application at doses higher than 100g ha-1 has toxic effect in maize plants with losses in growth and yield.

Atomic Oxygen Erosion Yield Dependence Upon Texture Development in Polymers

Science.gov (United States)

Banks, Bruce A.; Loftus, Ryan J.; Miller, Sharon K.

2016-01-01

The atomic oxygen erosion yield (volume of a polymer that is lost due to oxidation per incident atom) of polymers is typically assumed to be reasonably constant with increasing fluence. However polymers containing ash or inorganic pigments, tend to have erosion yields that decrease with fluence due to an increasing presence of protective particles on the polymer surface. This paper investigates two additional possible causes for erosion yields of polymers that are dependent upon atomic oxygen. These are the development of surface texture which can cause the erosion yield to change with fluence due to changes in the aspect ratio of the surface texture that develops and polymer specific atomic oxygen interaction parameters. The surface texture development under directed hyperthermal attack produces higher aspect ratio surface texture than isotropic thermal energy atomic oxygen attack. The fluence dependence of erosion yields is documented for low Kapton H (DuPont, Wilmington, DE) effective fluences for a variety of polymers under directed hyperthermal and isotropic thermal energy attack.

K/Ar hornblende ages from the higher Himalaya: implications for India-Asia collision and Himalayan metamorphosis

International Nuclear Information System (INIS)

Sorkhabi, R.B.; Stump, A.K.; Jain, A.K.; Manickavasagam, R.M.; Nishimura Susumu

1993-01-01

Two amphibolite samples from the Higher Himalayan Crystalline (HHC) belt from the Suru Valley, Zanskar, have yielded Eocene K/Ar hornblende cooling ages between 40 and 45 Ma, thus indicating much older peak metamorphic conditions in northern parts of the Indian Plate. These ages are in conformity with almost identical ages from metamorphic complexes across the Nanga Parbat syntaxis in Pakistan and reveal a 65 to 70-Ma collision phase of the Indian indentor in the NW-Himalaya. (author). 21 refs., 2 figs

Comparing milk yield, chemical properties and somatic cell count from organic and conventional mountain farming systems

Directory of Open Access Journals (Sweden)

Marcello Bianchi

2010-01-01

Full Text Available A study was undertaken to investigate the effects of farming systems (organic vs. conventional, diet (hay/concentrate vs. pasture and their interaction on milk yield, gross composition and fatty acid (FA profile of dairy cows bred in mountainous areas. For this purpose four dairy farms (two organic and two conventional were chosen in the alpine territory of Aosta Valley (NW Italy; individual milk yield was recorded daily and bulk milk samples were collected monthly from February to September 2007 to cover dietary variations. Higher levels of milk production (P<0.05 and lower milk protein amounts (P<0.01 were observed in the organic farms with respect to the conventional ones, while no significant differences were noticed in milk fat and lactose contents and in somatic cell count. Concerning fatty acids, only small differences were detected between organic and conventional milk and such differences seemed to be related mainly to the stabled period. Diet affected almost all variables studied: pasture feeding provided a significant improvement in the fatty acid composition in both organic and conventional systems leading to lower hypercholesterolemic saturated fatty acids, higher mono- and polyunsaturated fatty acids and conjugated linoleic acid amounts (P<0.001.

Investigation of Tolerance, Yield and Yield Components of Wheat Cultivars to Salinity of Irrigation Water at Sensitive Stages of Growth

Directory of Open Access Journals (Sweden)

B Saadatian

2013-04-01

Full Text Available This research in order to study of tolerance ability of wheat cultivates yield and yield components to salinity of irrigation water at sensitive stages of growth, was carried out as a factorial based on a randomized complete block design with 3 replications at greenhouse of Agricultural Faculty of Bu-Ali Sina University, in 2009. Treatments were included wheat cultivars of Alvand, Tous, Sayson and Navid and salinity of irrigation water induced by sodium chloride at five levels of 0, 4, 8, 12 and 16 dS m-1. The results showed that percentage and rate of emergence, plant height, 1000-grain weight, number of seed per spike, number of spike per pot, biological and grain yield reduced by increasing salinity level. At all stress levels Navid cv. had highest emergence percentage. In non-stress and 4 dS m-1, Alvand cv. and at higher levels of stress, Tous cv. had high height in reproductive phase. At control and 4 dS m-1, Sayson cv. and at 8, 12 and 16 dS m-1, Tous cv. in majority of yield and yield components traits had significant superior than other cultivars. Tolerance index of Sayson cv. at 4 and 8 dS m-1 was more than other cultivars but at 12 and 16 dS m-1, maximum value of this index was belonged to Tous cv. At all salinity levels, Alvand cv. had least tolerance index to stress. Number of spike per pot had maximum direct effect on grain yield of wheat cultivars in stress condition. Also indirect effect of biological yield via number of spike per pot than other its indirect effects, had maximum share in wheat seed yield.

Cacao Crop Management Zones Determination Based on Soil Properties and Crop Yield

Directory of Open Access Journals (Sweden)

Perla Silva Matos de Carvalho

Full Text Available ABSTRACT: The use of management zones has ensured yield success for numerous agricultural crops. In spite of this potential, studies applying precision agricultural techniques to cacao plantations are scarce or almost nonexistent. The aim of the present study was to delineate management zones for cacao crop, create maps combining soil physical properties and cacao tree yield, and identify what combinations best fit within the soil chemical properties. The study was conducted in 2014 on a cacao plantation in a Nitossolo Háplico Eutrófico (Rhodic Paleudult in Bahia, Brazil. Soil samples were collected in a regular sampling grid with 120 sampling points in the 0.00-0.20 m soil layer, and pH(H2O, P, K+, Ca2+, Mg2+, Na+, H+Al, Fe, Zn, Cu, Mn, SB, V, TOC, effective CEC, CEC at pH 7.0, coarse sand, fine sand, clay, and silt were determined. Yield was measured in all the 120 points every month and stratified into annual, harvest, and early-harvest cacao yields. Data were subjected to geostatistical analysis, followed by ordinary kriging interpolation. The management zones were defined through a Fuzzy K-Means algorithm for combinations between soil physical properties and cacao tree yield. Concordance analysis was carried out between the delineated zones and soil chemical properties using Kappa coefficients. The zones that best classified the soil chemical properties were defined from the early-harvest cacao yield map associated with the clay or sand fractions. Silt content proved to be an inadequate variable for defining management zones for cacao production. The delineated management zones described the spatial variability of the soil chemical properties, and are therefore important for site-specific management in the cacao crop.

Impact of NDF degradability of corn silage on the milk yield potential of dairy cows

Directory of Open Access Journals (Sweden)

Mauro Spanghero

2010-01-01

Full Text Available The neutral detergent fibre (NDF degradability of corn silage samples, measured in vitro (ivNDFd by a filter bag system, was used to examine (i the relationship between the ivNDFd and that calculated from acid detergent lignin (L content (NDFd and (ii the impact of ivNDFd variations on the predicted milk yield (MY of dairy cows fed corn silage based diets. A total of 173 samples of corn silage were collected during a period of three years (2001-03 in different dairy farms of the Po Valley (Northern Italy. Each sample was analysed for chemical composition and was also tested in triplicate for the ivNDFd using the DaisyII incubator (Ankom, Tech. Co., Fairport, NY, USA with incubation time of 48hs. Moreover, the NDFd of samples was calculated from the L contents, while the measured ivNDFd values were used to estimate the NEl, the potential dry matter intakes (DMI and to predict the MY of cows. Corn silage samples of the three years were similar for NDF and starch contents (44.2 and 30.7% DM, on average, respectively while samples from 2003, in comparison with 2001 and 2002, had lower crude protein (6.9 vs 8.3-8.4% DM, P<0.01 and L contents (3.3 vs 3.6-3.9% DM, P<0.01 and higher ivNDFd values (53.3 vs 45.6-47.8%, P<0.01. The relationship between ivNDFd and NDFd was weak (R2=0.09, not significant. The MY predicted from the NEl content and DMI of corn silage (5.5 MJ/kg DM and 8.9 kg/d minus the maintenance energy costs, was 11.5 kg/d on average (coefficient of variation 20%. Our simulations indicate that a variation of ivNDFd by +1.0% changes the NEl of corn silage to have an expected variation in milk yield of +0.15 kg/d. If the ivNDFd is also used to predict the corn silage DMI then a +1.0% variation in ivNDFd of corn silage produces an overall +0.23 kg/d MY variation. The present results indicate that ivNDFd is highly variable in corn silage populations and differences in this nutritional parameter have an appreciable impact on the predicted milk

A Theoretical Model for Estimation of Yield Strength of Fiber Metal Laminate

Science.gov (United States)

Bhat, Sunil; Nagesh, Suresh; Umesh, C. K.; Narayanan, S.

2017-08-01

The paper presents a theoretical model for estimation of yield strength of fiber metal laminate. Principles of elasticity and formulation of residual stress are employed to determine the stress state in metal layer of the laminate that is found to be higher than the stress applied over the laminate resulting in reduced yield strength of the laminate in comparison with that of the metal layer. The model is tested over 4A-3/2 Glare laminate comprising three thin aerospace 2014-T6 aluminum alloy layers alternately bonded adhesively with two prepregs, each prepreg built up of three uni-directional glass fiber layers laid in longitudinal and transverse directions. Laminates with prepregs of E-Glass and S-Glass fibers are investigated separately under uni-axial tension. Yield strengths of both the Glare variants are found to be less than that of aluminum alloy with use of S-Glass fiber resulting in higher laminate yield strength than with the use of E-Glass fiber. Results from finite element analysis and tensile tests conducted over the laminates substantiate the theoretical model.

Light affects Varronia curassavica essential oil yield by increasing trichomes frequency

Directory of Open Access Journals (Sweden)

Emily V.R. da S. Feijó

Full Text Available Light can act on essential oil yield directly on synthesis of secondary metabolites, or indirectly on plant growth. Varronia curassavica Jacq., Boraginaceae, is a native medicinal species from Brazil known as “erva-baleeira”, with anti-inflammatory activity related to its essential oil. Despite pharmacological evidences of this species and its economic importance for herbal medicine production, little is known about the effect of light on growth and essential oil production. This study aimed to analyze the influence of different irradiances on growth, frequency of trichomes, essential oil yield and composition of V. curassavica. The irradiance affected plant growth, but no significant alteration on leaf biomass was detected. The increase in essential oil content under higher irradiance reflected on essential oil yield, and is associated with higher frequency of glandular, globular trichomes. The essential oil composition, rich in caryophyllene derivatives was affected by irradiance, but α-humulene, the constituent of pharmaceutical interest, remained unchanged.

Plant yield and nitrogen content of a digitgrass in response to azospirillum inoculation

Energy Technology Data Exchange (ETDEWEB)

Schank, S.C.; Weier, K.L.; MacRae, I.C.

1981-02-01

Two Australian soils, a vertisol (pH 6.8, 0.299% N) and a sandy yellow podzol (pH 6.2, 0.042% N), were used with digitgrass, Digitaria sp. X46-2 (PI 421785), in a growth room experiment. Comparisons were made between plants inoculated with live and autoclaved bacterial suspensions of Australian and Brazilian isolates of Azospirillum brasilense. Seedlings were inoculated on days 10 and 35. Acetylene-reducing activity was measured five times during the experiment. Dry matter yields of the digitgrass on the podzol (low N) inoculated with liver bacteria were 23% higher than those of the controls. On the vertisol (high N), yield increases from inoculation with live bacteria were 8.5%. The higher-yielding plants had significantly lower precent nitrogen, but when total nitrogen of the tops was calculated, the inoculated plants had a higher total N than did the controls (P = 0.04). Acetylene-reducing activity was variable in the experiment, ranging from 0.5 to 11.9 mu mol of C2H2 core -1 day -1. Live bacterial treatment induced a proliferation of roots, possible earlier maturity, higher percent dry matter, and a higher total N in the tops. (Refs. 21).

Mass production of multi-wall carbon nanotubes by metal dusting process with high yield

Energy Technology Data Exchange (ETDEWEB)

Ghorbani, H. [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of); Rashidi, A.M., E-mail: Rashidiam@ripi.ir [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, P.O. Box 14665-1998, Tehran (Iran, Islamic Republic of); Rastegari, S.; Mirdamadi, S. [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of); Alaei, M. [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, P.O. Box 14665-1998, Tehran (Iran, Islamic Republic of)

2011-05-15

Research highlights: {yields} Synthesis of carbon nanotubes over Fe-Ni nanoparticles supported alloy 304L. {yields} Production of carbon nanotubes with high yield (700-1000%) and low cost catalyst. {yields} Optimum growth condition is CO/H{sub 2} = 1/1, 100 cm{sup 3}/min, at 620 {sup o}C under long term repetitive thermal cycling. {yields} Possibility of the mass production by metal dusting process with low cost. -- Abstract: Carbon nanotube materials were synthesized over Fe-Ni nanoparticles generated during disintegration of the surface of alloy 304L under metal dusting environment. The metal dusting condition was simulated and optimized through exposing stainless steel samples during long term repetitive thermal cycling in CO/H{sub 2} = 1/1, total gas flow rate 100 cm{sup 3}/min, at 620 {sup o}C for 300 h. After reaction, surface morphology of the samples and also carbonaceous deposition which had grown on sample surfaces were examined by stereoscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results revealed that multi-wall carbon nanotubes could be formed over nanocatalyst generated on the alloy surface by exploiting metal dusting process. By optimization of reaction parameters the yields of carbon nanotube materials obtained were 700-1000%. Also it has been shown herein that the amount of carbon nanotube materials remarkably increases when the reaction time is extended up to 300 h, indicating a possibility of the mass production by this easy method.

Differential metabolite profiles during fruit development in high-yielding oil palm mesocarp.

Directory of Open Access Journals (Sweden)

Huey Fang Teh

Full Text Available To better understand lipid biosynthesis in oil palm mesocarp, in particular the differences in gene regulation leading to and including de novo fatty acid biosynthesis, a multi-platform metabolomics technology was used to profile mesocarp metabolites during six critical stages of fruit development in comparatively high- and low-yielding oil palm populations. Significantly higher amino acid levels preceding lipid biosynthesis and nucleosides during lipid biosynthesis were observed in a higher yielding commercial palm population. Levels of metabolites involved in glycolysis revealed interesting divergence of flux towards glycerol-3-phosphate, while carbon utilization differences in the TCA cycle were proven by an increase in malic acid/citric acid ratio. Apart from insights into the regulation of enhanced lipid production in oil palm, these results provide potentially useful metabolite yield markers and genes of interest for use in breeding programmes.

Gamma rays role in the improvement of yield and early maturity in soybean

Energy Technology Data Exchange (ETDEWEB)

Moualla, M Y; Ali, N M [Atomic Energy Commission, P.O.Box 6091, Damascus (Syrian Arab Republic)

1995-10-01

Seeds from soybean variety glycine max (L) Merr., were irradiated with three doses of gamma rays: 100, 150 and 200 Gray in order to obtain high yielding and early maturity mutants to grown after wheat in a two crop rotation. All the three doses induced morphological and physiological variation and malformation that increased with increasing the dose. Coefficient of variation values were higher in M2 than in their respective values of M3. The results showed no selection efficiency under the non optimal environmental growing conditions with this lack of efficiency being more evident for yield than for early maturity. Using FTAB statistical programme 20 M2 and M3 plant were selected for each character and when evaluated in the following generation, it was clear that selection efficiency was higher for early maturity than for yield; the latter being high yielding and 4 early maturing m 4 mutants were obtained. 3 tabs.

Gamma rays role in the improvement of yield and early maturity in soybean

International Nuclear Information System (INIS)

Moualla, M.Y.; Ali, N.M.

1995-01-01

Seeds from soybean variety glycine max (L) Merr., were irradiated with three doses of gamma rays: 100, 150 and 200 Gray in order to obtain high yielding and early maturity mutants to grown after wheat in a two crop rotation. All the three doses induced morphological and physiological variation and malformation that increased with increasing the dose. Coefficient of variation values were higher in M2 than in their respective values of M3. The results showed no selection efficiency under the non optimal environmental growing conditions with this lack of efficiency being more evident for yield than for early maturity. Using FTAB statistical programme 20 M2 and M3 plant were selected for each character and when evaluated in the following generation, it was clear that selection efficiency was higher for early maturity than for yield; the latter being high yielding and 4 early maturing m 4 mutants were obtained. 3 tabs

Rigid particle revisited: Extrinsic curvature yields the Dirac equation

Energy Technology Data Exchange (ETDEWEB)

Deriglazov, Alexei, E-mail: alexei.deriglazov@ufjf.edu.br [Depto. de Matemática, ICE, Universidade Federal de Juiz de Fora, MG (Brazil); Laboratory of Mathematical Physics, Tomsk Polytechnic University, 634050 Tomsk, Lenin Ave. 30 (Russian Federation); Nersessian, Armen, E-mail: arnerses@ysu.am [Yerevan State University, 1 Alex Manoogian St., Yerevan 0025 (Armenia); Laboratory of Mathematical Physics, Tomsk Polytechnic University, 634050 Tomsk, Lenin Ave. 30 (Russian Federation)

2014-03-01

We reexamine the model of relativistic particle with higher-derivative linear term on the first extrinsic curvature (rigidity). The passage from classical to quantum theory requires a number of rather unexpected steps which we report here. We found that, contrary to common opinion, quantization of the model in terms of so(3.2)-algebra yields massive Dirac equation. -- Highlights: •New way of canonical quantization of relativistic rigid particle is proposed. •Quantization made in terms of so(3.2) angular momentum algebra. •Quantization yields massive Dirac equation.

Relation between academic yield and stress in medical students

Directory of Open Access Journals (Sweden)

Sandra Patricia González Peña

2006-12-01

Full Text Available Objective. To study risk factors that where found as influence in the academic yield (stress, alcohol, friendships, depression and family relations in the students of the Medicine Faculty of the Universidad de Manizales. Materials and methods: Descriptive study integrated by random selected sample, who were attending of II to XI semester of the Medicine faculty. An anonymous survey was conduced about sociodemographic, cultural, academic and motivational characteristics,including stress, depresión, family disfunction and substance abuse. We correlated all variables with academic yield using chi square test, Pearson`s coefficient and lineal regression. Results: 212 students of ages between 17 and 31 years where analyzed, in which the majority where from another city. Some of the factors were detected which affect the academic yield of the students as it is stress, depression, the family function and friendships among others. Conclusions: A significant relation between academic yield and stress was found. In turn, stress variable was influenced by depression, alcohol and family relation.

impacts of climate and farming management on maize yield

African Journals Online (AJOL)

ACSS

2015-11-24

Nov 24, 2015 ... Dry spells may affect crop growth and final yields, even .... Supplemental soil information, up to the depth of. 93 cm was .... be slightly cooler (Tmax) due to its higher attitude. (1807 m ... All climate data processing and plotting.

[Milk yield and environmental factors: Multiple regression analysis of the association between milk yield and udder health, fertility data and replacement rate].

Science.gov (United States)

Fölsche, C; Staufenbiel, R

2014-01-01

The relationship between milk yield and both fertility and general animal health in dairy herds is discussed from opposing viewpoints. The hypothesis (1) that raising the herd milk yield would decrease fertility results, the number of milk cells as an indicator for udder health and the replacement rate as a global indicator for animal health as well as increasing the occurrence of specific diseases as a herd problem was compared to the opposing hypotheses that there is no relationship (2) or that there is a differentiated and changing relationship (3). A total of 743 herd examinations, considered independent, were performed in 489 herds between 1995 and 2010. The milk yield, fertility rate, milk cell count, replacement rate, categorized herd problems and management information were recorded. The relationship between the milk yield and both the fertility data and animal health was evaluated using simple and multiple regression analyses. The period between calving and the first service displayed no significant relationship to the herd milk yield. Simple regression analysis showed that the period between calving and gestation, the calving interval and the insemination number were significantly positively associated with the herd milk yield. This positive correlation was lost in multiple regression analysis. The milk cell count and replacement rate using both the simple and multiple regression analyses displayed a significant negative relationship to the milk yield. The alternative hypothesis (3) was confirmed. A higher milk yield has no negative influence on the milk cell count and the replacement rate in terms of the udder and general health. When parameterizing the fertility, the herd milk yield should be considered. Extending the resting time may increase the milk yield while preventing a decline in the insemination index.

Secondary scintillation yield from GEM and THGEM gaseous electron multipliers for direct dark matter search

Science.gov (United States)

Monteiro, C. M. B.; Fernandes, L. M. P.; Veloso, J. F. C. A.; Oliveira, C. A. B.; dos Santos, J. M. F.

2012-07-01

The search for alternatives to PMTs as photosensors in optical TPCs for rare event detection has significantly increased in the last few years. In particular, in view of the next generation large volume detectors, the use of photosensors with lower natural radioactivity, such as large area APDs or GM-APDs, with the additional possibility of sparse surface coverage, triggered the intense study of secondary scintillation production in micropattern electron multipliers, such as GEMs and THGEMs, as alternatives to the commonly used uniform electric field region between two parallel meshes. The much higher scintillation output obtained from the electron avalanches in such microstructures presents an advantage in those situations. The accurate knowledge of the amount of such scintillation is important for correct detector simulation and optimization. It will also serve as a benchmark for software tools developed and/or under development for the calculation of the amount of such scintillation.The secondary scintillation yield, or electroluminescence yield, in the electron avalanches of GEMs and THGEMs operating in gaseous xenon and argon has been determined for different gas pressures. At 1 bar, THGEMs deliver electroluminescence yields that are more than one order of magnitude higher when compared to those achieved in GEMs and two orders of magnitude when compared to those achieved in a uniform field gap. The THGEM electroluminescence yield presents a faster decrease with pressure when comparing to the GEM electroluminescence yield, reaching similar values to what is achieved in GEMs for xenon pressures of 2.5 bar, but still one order of magnitude higher than that produced in a uniform field gap. Another exception is the GEM operating in argon, which presents an electroluminescence yield similar to that produced in a uniform electric field gap, while the THGEM achieves yields that are more than one order of magnitude higher.

Pyrolysis and liquefaction of acetone and mixed acetone/ tetralin swelled Mukah Balingian Malaysian sub-bituminous coal-The effect on coal conversion and oil yield

International Nuclear Information System (INIS)

Mohd Pauzi Abdullah; Mohd Azlan Mohd Ishak; Khudzir Ismail

2008-01-01

The effect of swelling on Mukah Balingian (MB) Malaysian sub-bituminous coal macrostructure was observed by pyrolysing the swelled coal via thermogravimetry under nitrogen at ambient pressure. The DTG curves of the pyrolyzed swelled coal samples show the presence of evolution peaks at temperature ranging from 235 - 295 degree Celsius that are due to releasing of light molecular weight hydrocarbons. These peaks, however, were not present in the untreated coal, indicating some changes in the coal macrostructure has occurred in the swelled coal samples. The global pyrolysis kinetics for coal that follows the first-order decomposition reaction was used to evaluate the activation energy of the pyrolyzed untreated and swelled coal samples. The results thus far have shown that the activation energy for the acetone and mixed acetone/ tetralin-swelled coal samples exhibit lower values than untreated coal, indicating less energy is required during the pyrolysis process due to the weakening of the coal-coal macromolecular interaction network. Moreover, liquefaction on the swelled coal samples that was carried out at temperatures ranging from 360 to 450 degree Celsius at 4 MPa of nitrogen pressure showed the enhancement of the coal conversion and oil yield at temperature of 420 degree Celsius, with retrogressive reaction started to dominate at higher temperature as indicated by decreased and increased in oil yield and high molecular weight pre-asphaltene, respectively. These observations suggest that the solvent swelling pre-treatment using acetone and mixed acetone/ tetralin can improve the coal conversion and oil yields at less severe liquefaction condition. (author)

Yield trends and yield gap analysis of major crops in the world

NARCIS (Netherlands)

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are

Quartz crystal microbalance-based system for high-sensitivity differential sputter yield measurements

International Nuclear Information System (INIS)

Rubin, B.; Topper, J. L.; Farnell, C. C.; Yalin, A. P.

2009-01-01

We present a quartz crystal microbalance-based system for high sensitivity differential sputter yield measurements of different target materials due to ion bombardment. The differential sputter yields can be integrated to find total yields. Possible ion beam conditions include ion energies in the range of 30-350 eV and incidence angles of 0 deg. - 70 deg. from normal. A four-grid ion optics system is used to achieve a collimated ion beam at low energy (<100 eV) and a two-grid ion optics is used for higher energies (up to 750 eV). A complementary weight loss approach is also used to measure total sputter yields. Validation experiments are presented that confirm high sensitivity and accuracy of sputter yield measurements.

The effect of sowing date and plant density on yield and yield components of safflower (Carthamus tinctorious L. in Rokh plateau .

Directory of Open Access Journals (Sweden)

seyd fazel fazeli kakhaki

2009-06-01

Full Text Available To investigate the effect of sowing date and plant density on yield and yield components of safflower ( Carthamus tinctorious as well as evaluating the possibility of the second sowing of the plant in Torbat Heidariyeh , a field experiment was conducted in Rokh, Cold Season Cereal Research Station 2005 . The experiment was conducted in split plot arrangement in complete randomized block design with four replications . Main plots were sowing date in five levels including 9 April, 10 May, 31 May, 20 June, 11 July and sub plots were plant density in three levels including 300000, 400000, 500000 plants per hectar. Some charactristics such as the number of capitulum per square meter, seed number in capitulum, seed weight, harvest index and seed yeild was evaluated.The highest seed yield was obtained in first sowing date in 3347 kg/ha and a delay in sowing date resulted a decrease in yield. The cold weather in (05/11/2005 caused flower fertility not accured, consequently, sowing was not successful . Results showed that the effect of sowing date on yield depends on the number of capitulum per unit area and the number of grains per capitulum. These two characteristics in th first sowing date in respect of the other dates were higher. The effect of density on yield was significant resulted on yield increase due to capitulum increase in unit area. As a result, the first sowing date with the highest density is recommended. However, The third and fourth sowing date can be considered as the second planting in a sequeational cropping system .

Delayed neutron yield from fast neutron induced fission of 238U

International Nuclear Information System (INIS)

Piksaikin, V.M.; Kazakov, L.E.; Isaev, S.G.; Roshchenko, V.A.; Goverdovski, A.A.; Tertytchnyi, R.G.

2002-01-01

The measurements of the total delayed neutron yield from fast neutron induced fission of 238 U were made. The experimental method based on the periodic irradiation of the fissionable sample by neutrons from a suitable nuclear reaction had been employed. The preliminary results on the energy dependence of the total delayed neutron yield from fission of 238 U are obtained. According to the comparison of experimental data with our prediction based on correlation properties of delayed neutron characteristics, it is concluded that the value of the total delayed neutron yield near the threshold of (n,f) reaction is not a constant. (author)

Stability Parameters for Grain Yield and its Component Traits in Maize Hybrids of Different FAO Maturity Groups

Directory of Open Access Journals (Sweden)

Dragan Djurovic

2014-12-01

Full Text Available An objective evaluation of maize hybrids in intensive cropping systems requires identification not only of yield components and other agronomically important traits but also of stability parameters. Grain yield and its components were assessed in 11 maize hybrids with different lengths of growing season (FAO 300-700 maturity groups using analysis of variance and regression analysis at three different locations in Western Serbia. The test hybrids and locations showed significant differences in grain yield, grain moisture content at maturity, 1,000-kernel weight and ear length. A significant interaction was observed between all traits and the environment. The hybrids with higher mean values of the traits, regardless of maturity group, generally exhibited sensitivity i.e. adaptation to more favourable environmental conditions as compared to those having lower mean values. Regression coefficient (bi values for grain yield mostly suggested no significant differences relative to the mean. The medium-season hybrid gave high yields and less favourable values of stability parameters at most locations and in most years, as compared to mediumlate hybrids. As compared to medium-early hybrids, medium-late hybrids (FAO 600 and 700 mostly exhibited unfavourable values of stability parameters i.e. a specific response and better adaptation to favourable environmental conditions, and gave higher average yields. Apart from producing lower average yields, FAO 300 and 400 hybrids showed higher yield stability as compared to the other hybrids tested. Medium-late hybrids had higher yields and showed a better response to favourable environmental conditions compared to early-maturing hybrids. Therefore, they can be recommended for intensive cultural practices and low-stress environments. Due to their more favourable stability parameter values, medium-early hybrids can be recommended for low-intensity cultural practices and stressful environments.

Photophysics of the variable quantum yield of asymmetric bilirubin

International Nuclear Information System (INIS)

Troup, G.J.

1998-01-01

Full text: Bilirubin (BR), responsible for neonatal jaundice, is a molecule containing two pyrromethenone chromophores conjoined by a 'saturated' carbon CH 2 group. Because this disease is cured by phototherapy, BR has been extensively studied by laser means. When the chromophores in each half of the molecule are identical, we have symmetrical BR (SBR); when they are not, we have asymmetric BR (ASBR). The quantum yield of the photoproducts in simple organic solution from SBR is not wavelength-dependent, while that from ASBR is. Because of the proximity of the two chromophores, both the SBR and ASBR systems are subject to Davidoff (dynamic electric dipole) splitting of the chromophore excited states. A quantum mechanical calculation shows that when the two (ASBR) chromophore states are not degenerate, the higher Davidoff state is preferentially occupied by the chromophore with the 'original' higher energy, and the lower Davidoff state by the chromophore of 'original' lower energy. This is just what is required for the quantum yield to vary with wavelength. If the variation of the quantum yield of ASBR in the presence of human serum albumen is approximated by a square-wave (narrow line approximation), the deduced ratio of the short wavelength photoproduct yield with the long wavelength one is in agreement with accepted values for the 'original' energy difference of the chromophores, and the Davidoff splitting parameter. A previous explanation has involved variation of relaxation processes with wavelength, but only qualitatively. The quantum yields for SBRs bonded to HSA are not yet published, but show wavelength variation, possibly from asymmetric bonding. In 0.1% ammonia/methanol however, there is no such variation for the SBRs, while for ASBR, there is, and the photoproduct ratios for long and short wavelength are reciprocals of one another, as predicted by our theory

Characterization of serrated yielding in service exposed Inconel 625 alloy

International Nuclear Information System (INIS)

Chatterjee, Arnomitra; Sharma, Garima; Chakravartty, J.K.

2016-01-01

The Alloy-625 is an austentic alloy which is being used for a variety of components in the aerospace, marine, chemical and nuclear industries. Tensile tests have been carried out on service exposed Inconel 625 ammonia cracker tube used at heavy water production plant to study the effect of microstructure on the mechanical properties of the material. Owing to temperature gradient during in service condition the microstructure was different in top (T), middle (M) and bottom (B) sections of the tube. The stress-strain curve obtained from conventional tensile test was found to exhibit serrated yielding with in an intermediate temperature regime of 250-600 °C. Both normal and inverse Portevin-Le Chatelier (PLC) effect could be identified at lower and higher temperature regime respectively. The normal behavior was associated with type (A+B) serrations and interstitial atom C was held responsible for the aging of dislocations in this region. On the contrary, the serrations were of type C in nature in inverse PLC regime and were attributed to the locking of dislocations by substitutional Mo atoms. Further analyses of activation energy and transition temperature for normal to inverse PLC dynamics, supported with Transmission Electron Microscopy (TEM) observation revealed that the basic deformation mechanism was different in M and B samples than that in the T samples. While the deformation in T samples were achieved by usual dislocation migration, in M and B samples it was through the propagation of stacking faults in large γ” precipitates. The transition temperature from normal to inverse PLC dynamics also varied appreciably in T samples than that of the M and B ones which could be explained in terms of the delayed depletion of Mo solutes in solution for T samples. (author)

Evaluation Of Yield And Chemical Properties Of Some Faba Bean (Vicia FABA L.) Mutants Induced By GAMMA Radiation And Ethyl Methane Sulphonate

International Nuclear Information System (INIS)

Sallam, E.M.; Nasr, E.H.; Attia, Z.M.; Shawki, H.A.

2013-01-01

This investigation aims to study the effect of physical and chemical mutagens on the yield and chemical properties as well as amino acids composition of defatted faba bean (Vicia faba L.) seeds meal as a control (Giza 2) compared with mutants produced by gamma radiation and ethyl methane sulphonate (EMS). Also, the functional properties of these samples were determined. The results indicated high differences between mutation for seed yield and its components than the untreated samples. In addition, radiation mutation of faba bean seeds showed slight increase in protein content as the main constituent of faba bean seeds as well as total oil percentages in some mutant of these seeds in return of decreasing in total carbohydrate. Furthermore, radiation mutation had detectable effects on the total amino acids contents of faba bean seeds meal which had a higher percentages on essential amino acids (EAA) and non-essential amino acids (NEAA) and mutant 3 was the highest values of EAA and NEAA as compared to the control. On the other hand, radiation mutation improved the protein functional properties of some mutant of faba bean meal flour than the other mutant samples as compared to local commercial variety

Fission-product yields for thermal-neutron fission of curium-243

International Nuclear Information System (INIS)

Breederland, D.G.

1982-01-01

Cumulative fission yields for 25 gamma rays emitted during the decay of 23 fission products produced by thermal-neutron fission of 243 Cm have been determined. Using Ge(Li) spectroscopy, 33 successive pulse-height spectra of gamma rays emitted from a 77-ng sample of 243 Cm over a period of approximately two and one-half months were analyzed. Reduction of these spectra resulted in the identification and matching of gamma-ray energies and half-lives to specific radionuclides. Using these results, 23 cumulative fission-product yields were calculated. Only those radionuclides having half-lives between 6 hours and 65 days were observed. Prior to this experiment, no fission-product yields had been recorded for 243 Cm

Effect of Mycorrhiza Symbiosis on Yield, Yield Components and Water Use Efficiency of Sesame (Sesamum indicum L. Affected by Different Irrigation Regimes in Mashhad Condition

Directory of Open Access Journals (Sweden)

A Koocheki

2016-02-01

Full Text Available Introduction Plant association with mycorrhiza has been considered as one of the options to improve input efficiency particularly for water and nutrient - (Allen and Musik, 1993; Bolan, 1991. This has been due to kncreasing the absorbing area of the root and therefore better contact with water and nutrients. Inoculation with mycorrhiza enhances nutrient uptake with low immobility such as phosphorus and solphur-, improve association and could be an option to drought and other environmental abnormalities such as salinity (Rice et al., 2002. Moreover, higher water use efficiency (WUE for crops -has been reported in the literatures (Sekhara and Reddy, 1993.The sustainable use of scarce water resources in Iran is a priority for agricultural development. The pressure of using water in agriculture sector is increasing, so creating ways to improve water-use efficiency and taking a full advantage of available water are crucial. Water stress reduce crop yield by impairing the growth of crop canopy and biomass. Scheduling water application is very crucial for efficient use of drip irrigation system, as excessive irrigation reduces yield, while inadequate irrigation causes water stress and reduces production. The aim of present study was to evaluate the symbiotic effect of mycorrhiza on yield, yield components and water use efficiency of sesame under different irrigation regimes in Mashhad. Material and Methods In order to investigate the impact of inoculation with two species of Arbuscular mycorrhiza fungi on yield, yield components and water use efficiency (WUE of sesame (Sesamum indicum L. under different irrigation regimes, an experiment was conducted as split plot based on a randomized complete block design with three replications during two growing seasons 2009-2010 and 2010-2011 at the Agricultural Research Station, College of Agriculture, Ferdowsi University of Mashhad.. The experimental factors were three irrigation regimes include 2000, 3000 and

Simulating the potential yield and yield gaps of sugar beet due to water and nitrogen limitations in Khorasan province using SUCROS model

Directory of Open Access Journals (Sweden)

R Deihimfard

2015-12-01

Full Text Available Introduction Crop productivity is highly constrained by water and nitrogen limitations in many areas of the world (Kalra et al., 2007. Therefore, there is a need to investigate more on nitrogen and water management to achieve higher production as well as quality. Irrigated sugar beet in the cropping systems of Khorasan province in northeastern of Iran accounts for about 34% of the land area under sugar beet production (~115,000 ha with an average yield of around 36 t.ha-1 (Anonymous, 2009. However, there is a huge yield gap (the difference between potential and water and nitrogen-limited yield mainly due to biotic and abiotic factors causing major reduction in farmers’ yield. Accordingly, yield gap analysis should be carried out to reduce the yield reduction and reach the farmer’s yield to the potential yield. The current study aimed to simulate potential yield as well as yield gap related to water and nitrogen shortage in the major sugar beet-growing areas of Khorasan province of Iran. Materials and methods This study was carried out in 6 locations across Khorasan province, which is located in the northeast of Iran. Long term weather data for 1986 to 2009 were obtained from Iran Meteorological Organization for 6 selected locations. The weather data included daily sunshine hours (h, daily maximum and minimum temperatures (◦C, and daily rainfall (mm. Daily solar radiation was estimated using the Goudriaan (1993 method. The validated SUCROSBEET model (Deihimfard, 2011; Deihimfard et al., 2011 was then used to estimate potential, water and nitrogen-limited yield and yield gap of sugar beet for 6 selected locations across the Khorasan province in the northeast of Iran. This model simulates the impacts of weather, genotype and management factors on crop growth and development, soil water and nitrogen balance on a daily basis and finally it predicts crop yield. The model requires input data, including local weather and soil conditions, cultivar

EFFECT OF COVER CROPS ON SOIL ATTRIBUTES, PLANT NUTRITION, AND IRRIGATED TROPICAL RICE YIELD

Directory of Open Access Journals (Sweden)

ANDRE FROES DE BORJA REIS

2017-01-01

Full Text Available In flood plains, cover crops are able to alter soil properties and significantly affect rice nutrition and yield. The aims of this study were to determine soil properties, plant nutrition, and yield of tropical rice cultivated on flood plains after cover crop cultivation with conventional tillage (CT and no-tillage system (NTS at low and high nitrogen (N fertilization levels. The experimental design was a randomized block in a split-split-plot scheme with four replications. In the main plots were cover crops sunhemp (Crotalaria juncea and C. spectabilis, velvet bean (Mucuna aterrima, jackbean (Canavalia ensiformis, pigeon pea (Cajanus cajan, Japanese radish (Raphanus sativus, cowpea (Vigna unguiculata and a fallow field. In the subplots were the tillage systems (CT or NTS. The nitrogen fertilization levels in the sub-subplots were (10 kg N ha-1 and 45 kg N ha-1. All cover crops except Japanese radish significantly increased mineral soil nitrogen and nitrate concentrations. Sunhemp, velvet bean, and cowpea significantly increased soil ammonium content. The NTS provides higher mineral nitrogen and ammonium content than that by CT. Overall, cover crops provided higher levels of nutrients to rice plants in NTS than in CT. Cover crops provide greater yield than fallow treatments. Rice yield was higher in NTS than in CT, and greater at a higher rather than lower nitrogen fertilization level.

42 CFR 431.814 - Sampling plan and procedures.

Science.gov (United States)

2010-10-01

... reliability of the reduced sample. (4) The sample selection procedure. Systematic random sampling is... sampling, and yield estimates with the same or better precision than achieved in systematic random sampling... 42 Public Health 4 2010-10-01 2010-10-01 false Sampling plan and procedures. 431.814 Section 431...

Parameter Optimization for Enhancement of Ethanol Yield by Atmospheric Pressure DBD-Treated Saccharomyces cerevisiae

International Nuclear Information System (INIS)

Dong Xiaoyu; Yuan Yulian; Tang Qian; Dou Shaohua; Di Lanbo; Zhang Xiuling

2014-01-01

In this study, Saccharomyces cerevisiae (S. cerevisiae) was exposed to dielectric barrier discharge plasma (DBD) to improve its ethanol production capacity during fermentation. Response surface methodology (RSM) was used to optimize the discharge-associated parameters of DBD for the purpose of maximizing the ethanol yield achieved by DBD-treated S. cerevisiae. According to single factor experiments, a mathematical model was established using Box-Behnken central composite experiment design, with plasma exposure time, power supply voltage, and exposed-sample volume as impact factors and ethanol yield as the response. This was followed by response surface analysis. Optimal experimental parameters for plasma discharge-induced enhancement in ethanol yield were plasma exposure time of 1 min, power voltage of 26 V, and an exposed sample volume of 9 mL. Under these conditions, the resulting yield of ethanol was 0.48 g/g, representing an increase of 33% over control. (plasma technology)

Transuranium analysis methodologies for biological and environmental samples

International Nuclear Information System (INIS)

Wessman, R.A.; Lee, K.D.; Curry, B.; Leventhal, L.

1978-01-01

Analytical procedures for the most abundant transuranium nuclides in the environment (i.e., plutonium and, to a lesser extent, americium) are available. There is a lack of procedures for doing sequential analysis for Np, Pu, Am, and Cm in environmental samples, primarily because of current emphasis on Pu and Am. Reprocessing requirements and waste disposal connected with the fuel cycle indicate that neptunium and curium must be considered in environmental radioactive assessments. Therefore it was necessary to develop procedures that determine all four of these radionuclides in the environment. The state of the art of transuranium analysis methodology as applied to environmental samples is discussed relative to different sample sources, such as soil, vegetation, air, water, and animals. Isotope-dilution analysis with 243 Am ( 239 Np) and 236 Pu or 242 Pu radionuclide tracers is used. Americium and curium are analyzed as a group, with 243 Am as the tracer. Sequential extraction procedures employing bis(2-ethyl-hexyl)orthophosphoric acid (HDEHP) were found to result in lower yields and higher Am--Cm fractionation than ion-exchange methods

Relation of watershed setting and stream nutrient yields at selected sites in central and eastern North Carolina, 1997-2008

Science.gov (United States)

Harden, Stephen L.; Cuffney, Thomas F.; Terziotti, Silvia; Kolb, Katharine R.

2013-01-01

Data collected between 1997 and 2008 at 48 stream sites were used to characterize relations between watershed settings and stream nutrient yields throughout central and eastern North Carolina. The focus of the investigation was to identify environmental variables in watersheds that influence nutrient export for supporting the development and prioritization of management strategies for restoring nutrient-impaired streams. Nutrient concentration data and streamflow data compiled for the 1997 to 2008 study period were used to compute stream yields of nitrate, total nitrogen (N), and total phosphorus (P) for each study site. Compiled environmental data (including variables for land cover, hydrologic soil groups, base-flow index, streams, wastewater treatment facilities, and concentrated animal feeding operations) were used to characterize the watershed settings for the study sites. Data for the environmental variables were analyzed in combination with the stream nutrient yields to explore relations based on watershed characteristics and to evaluate whether particular variables were useful indicators of watersheds having relatively higher or lower potential for exporting nutrients. Data evaluations included an examination of median annual nutrient yields based on a watershed land-use classification scheme developed as part of the study. An initial examination of the data indicated that the highest median annual nutrient yields occurred at both agricultural and urban sites, especially for urban sites having large percentages of point-source flow contributions to the streams. The results of statistical testing identified significant differences in annual nutrient yields when sites were analyzed on the basis of watershed land-use category. When statistical differences in median annual yields were noted, the results for nitrate, total N, and total P were similar in that highly urbanized watersheds (greater than 30 percent developed land use) and (or) watersheds with greater

High yield and facile microwave-assisted synthesis of conductive H{sub 2}SO{sub 4} doped polyanilines

Energy Technology Data Exchange (ETDEWEB)

Gizdavic-Nikolaidis, Marija R., E-mail: m.gizdavic@auckland.ac.nz [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland Mail Centre, Auckland, 1142 (New Zealand); Faculty of Physical Chemistry, Studentski Trg 12-16, PO Box 137, 11001, Belgrade (Serbia); Jevremovic, Milutin M. [Public Company Nuclear Facilities of Serbia, 12-14 Mike Petrovica Alasa, Vinca, 11351, Belgrade (Serbia); Milenkovic, Maja [Faculty of Physical Chemistry, Studentski Trg 12-16, PO Box 137, 11001, Belgrade (Serbia); Allison, Morgan C. [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland Mail Centre, Auckland, 1142 (New Zealand); Stanisavljev, Dragomir R. [Faculty of Physical Chemistry, Studentski Trg 12-16, PO Box 137, 11001, Belgrade (Serbia); Bowmaker, Graham A. [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland Mail Centre, Auckland, 1142 (New Zealand); Zujovic, Zoran D. [School of Chemical Sciences, The University of Auckland, Private Bag 92019, Auckland Mail Centre, Auckland, 1142 (New Zealand); MacDiarmid Institute for Advanced Materials and Nanotechnology, Victoria University of Wellington, PO Box 600, Wellington, 6140 (New Zealand); Institute of General and Physical Chemistry, Studentski Trg 12-16, 11001, Belgrade (Serbia)

2016-04-15

The microwave-assisted synthesis of polyaniline (PANI) was performed using ammonium persulphate (APS) as oxidizing agent in 0.5 M–2.5 M concentration range of aqueous sulphuric acid (H{sub 2}SO{sub 4}) at 93 W applied microwave power of 10 min duration. The microwave (MW) synthesized PANIs had 3 times higher yield in comparison to PANI samples prepared using a classical method, CS (0 W MW power) at the same temperature for 10 min synthesis duration period. Fourier Transform Infrared (FTIR) and UV–Vis spectroscopies confirmed the formation of PANI structure in all products. The influence of H{sub 2}SO{sub 4} acid dopant on the spin concentration of MW and CS H{sub 2}SO{sub 4} doped PANI samples were examined by EPR spectroscopy, while the morphological characteristics were investigated by using scanning electron microscopy (SEM). XRD results showed amorphous phases in both MW and CS H{sub 2}SO{sub 4} doped PANI samples. Conductivity measurements revealed ∼1.5 times higher conductivity values for MW H{sub 2}SO{sub 4} doped PANI samples in comparison with PANI samples prepared by the CS method under same condition. The influence of sulfate anion in comparison to chloride anion as a dopant on morphological, dopant levels and conductivity properties of MW PANI samples were also investigated. - Highlights: • Nanoporous microwave synthesized doped polyanilines as chemical sensor material. • Morphology and physical properties of polyanilines depend on acid concentration. • Spin concentration is determined by the nature of the polyaniline synthesis.

High yield CTMP fibres as a possibility of the more efficient yield of wood raw material

Directory of Open Access Journals (Sweden)

Klašnja Bojana A.

2004-01-01

Full Text Available The evident shortage of wood as a raw material has become a limiting factor in the pulp and paper industry which is the greatest consumer of wood in Europe. The situation in our country is similar. During the few past years, the production of poplar and willow pulpwood was 220.000 m3 per year, which is insufficient for the planned increase in the production of sulphate pulp (175.000 tons till 2005. This paper deals with the aspects of the more efficient yield of raw material, based on the significantly higher yield of CTMP fibres, as well as with the significance of the lower adverse effect on the environment. It also analyses the conditions of production and the quality of the obtained fibres, as a possible substitute for chemical pulp and secondary fibres in papers of different quality. The main reasons for the production and use of CTMP fibres in our country are reported.

Determinants of the Government Bond Yield in Spain: A Loanable Funds Model

Directory of Open Access Journals (Sweden)

Yu Hsing

2015-07-01

Full Text Available This paper applies demand and supply analysis to examine the government bond yield in Spain. The sample ranges from 1999.Q1 to 2014.Q2. The EGARCH model is employed in empirical work. The Spanish government bond yield is positively associated with the government debt/GDP ratio, the short-term Treasury bill rate, the expected inflation rate, the U.S. 10 year government bond yield and a dummy variable representing the debt crisis and negatively affected by the GDP growth rate and the expected nominal effective exchange rate.

Yields of fission products produced by thermal-neutron fission of 249Cf

International Nuclear Information System (INIS)

Dickens, J.K.; McConnell, J.W.

1981-01-01

Absolute yields have been determined for 107 gamma rays emitted in the decay of 97 fission products representing 54 mass chains created during thermal-neutron fission of 249 Cf. These results include 14 mass chains for which no prior yield data exist. Using a Ge(Li) detector, spectra were obtained of gamma rays emanating from a 0.4 μg sample of 249 Cf between 45 s and 0.4 yr after very short irradiations of the 249 Cf by thermal neutrons. On the basis of measured gamma-ray yields and known nuclear data, total chain mass yields and relative uncertainties were obtained for 51 masses between 89 and 156. The absolute overall normalization uncertainty is approx.8%. The measured A-chain cumulative yields make up 77% of the total light mass (A 249 Cf

Sensory, yield and quality differences between organically and conventionally grown winter wheat.

Science.gov (United States)

Arncken, Christine M; Mäder, Paul; Mayer, Jochen; Weibel, Franco P

2012-11-01

Consumers expect organic produce to have higher environmental, health and sensory related qualities than conventional produce. In order to test sensory differences between bio-dynamically, bio-organically and conventionally grown winter wheat (Triticum aestivum L., cv. Runal), we performed double-blinded triangle tests with two panels on dry wholemeal flour from the harvest years 2006, 2007 and 2009 and from two field replicates of the 'DOK' long-term farming system comparison field trial near Basel, Switzerland. Yield and quality parameters were also assessed. Significant farming system effects were found for yield (up to 42% reduction in the organic system), thousand kernel weight, hectolitre weight and crude protein content across the three years. In the triangle tests one out of 12 pair-wise farming system comparisons (PFSCs) on wholemeal flour made from the different wheat samples showed significant sensory differentiation (between bio-dynamically and conventionally grown wheat). When all data from the three harvest years and two panels were aggregated, a statistically significant effect (P = 0.045) of PFSCs on the number of correct answers became evident. Although testing of dry wholemeal flour was very challenging for panellists, we were able to show that sensory differences between farming systems can occur. Copyright © 2012 Society of Chemical Industry.

Evaluation of yield and N2 fixation of mutant lines of groundnut in Malaysia

International Nuclear Information System (INIS)

Rusli, I.; Harun, A.R.; Rahman, K.A.; Shamsuddin, S.; Rahim, K.A.; Danso, S.K.A.

1998-01-01

The 15 N-dilution technique was used to evaluate N 2 fixation in groundnut (Arachis hypogaea L.) in three field trials of cultivars Matjan and V-13 (parents), their selected mutant lines, and a other local and foreign genotypes. Matjan mutant MJ/40/42 consistently produced the highest pod yields, at above 4 t ha -1 , 14-22% higher yields than the parent. In contrast, none of the V-13 mutants had consistently better yields than the parent. The mutant lines did not show consistent agronomic performance from year to year. Total dry matter yield did not correlate with pod yield, and pod yield did not correlate with amount of N fixed

Yields of ZP sweet maize hybrids in dependence on sowing densities

Directory of Open Access Journals (Sweden)

Srdić Jelena

2008-01-01

Full Text Available Sweet maize differs from maize of standard grain quality by many important traits that affect the ear appearance, and especially by traits controlling taste. The ear appearance trait encompasses the kernel row number, configuration, row pattern (direction and arrangement, seed set, kernel width and depth, ear shape and size. The quality of immature kernels is controlled by genes by which sweet maize differs from common maize. In order to obtain high-ranking and high-quality yields, it is necessary to provide the most suitable cropping practices for sweet maize hybrids developed at the Maize Research Institute, Zemun Polje. The adequate sowing density is one of more important elements of correct cropping practices. The objective of the present study was to determine the effect of four sowing densities in four ZP sweet maize hybrids of different FAO maturity groups on ear qualitative traits and yields obtained on chernozem type of soil in Zemun Polje. The observed traits of sweet maize (ear length, kernel row number, number of kernels per row, yield and shelling percentage significantly varied over years. The higher sowing density was the higher yield of sweet maize was, hence the highest ear yield of 9.67 t ha-1 , on the average for all four hybrids, was recorded at the highest sowing density of 70,000 plants ha-1. The highest yield was detected in the hybrid ZP 424su. The highest shelling percentage (67.81% was found in the hybrid ZP 521su at the sowing density of 60,000 plants ha-1. Generally, it can be stated that sweet maize hybrids of a shorter growing season (FAO 400 could be cultivated up to 70,000 plants ha-1, while those of a longer growing season (FAO 500 could be grown up to 60,000 plants ha-1. In such a way, the most favorable parameters of yields and the highest yields can be obtained.

Deep rooting conferred by DEEPER ROOTING 1 enhances rice yield in paddy fields.

Science.gov (United States)

Arai-Sanoh, Yumiko; Takai, Toshiyuki; Yoshinaga, Satoshi; Nakano, Hiroshi; Kojima, Mikiko; Sakakibara, Hitoshi; Kondo, Motohiko; Uga, Yusaku

2014-07-03

To clarify the effect of deep rooting on grain yield in rice (Oryza sativa L.) in an irrigated paddy field with or without fertilizer, we used the shallow-rooting IR64 and the deep-rooting Dro1-NIL (a near-isogenic line homozygous for the Kinandang Patong allele of DEEPER ROOTING 1 (DRO1) in the IR64 genetic background). Although total root length was similar in both lines, more roots were distributed within the lower soil layer of the paddy field in Dro1-NIL than in IR64, irrespective of fertilizer treatment. At maturity, Dro1-NIL showed approximately 10% higher grain yield than IR64, irrespective of fertilizer treatment. Higher grain yield of Dro1-NIL was mainly due to the increased 1000-kernel weight and increased percentage of ripened grains, which resulted in a higher harvest index. After heading, the uptake of nitrogen from soil and leaf nitrogen concentration were higher in Dro1-NIL than in IR64. At the mid-grain-filling stage, Dro1-NIL maintained higher cytokinin fluxes from roots to shoots than IR64. These results suggest that deep rooting by DRO1 enhances nitrogen uptake and cytokinin fluxes at late stages, resulting in better grain filling in Dro1-NIL in a paddy field in this study.

The influence of aging stress on the yield point phenomenon in the zirconium alloy, ozhennite 0.5

International Nuclear Information System (INIS)

Dickson, J.I.; Sayar, A.

1977-01-01

The influence of aging stress on the occurrence of yield points during interrupted tensile tests was studied in the temperature range 423 to 623 K for aging times of 2 to 10 min. The results indicate that at the lower temperatures the yield points are produced by dislocation rearrangements, with a minimum yield drop resulting from an aging close to the internal stress estimated by an unloading to zero stress relaxation technique. Above approximately 458 K, solute atoms can play an important role in the formation of the yield points. When this solute strain-aging occurs strongly, a maximum yield drop is at times obtained by aging at a stress close to the measured internal stress. At the higher deformation temperatures, the yield drop decreases more rapidly with increasing plastic strain, which result appears related to the greater amount of tangling of dislocations produced at the higher temperatures. (Auth.)

Improving Aspergillus niger tannase yield by N+ ion beam implantation

Directory of Open Access Journals (Sweden)

Wei Jin

2013-02-01

Full Text Available This work aimed to improve tannase yield of Aspergillus niger through N+ ion beam implantation in submerged fermentation. The energy and dose of N+ ion beam implantation were investigated. The results indicated that an excellent mutant was obtained through nine successive implantations under the conditions of 10 keV and 30-40 (×2.6×10(13 ions/cm², and its tannase yield reached 38.5 U/mL, which was about five-time higher than the original strain. The study on the genetic stability of the mutant showed that its promising performance in tannase production could be stable. The studies of metal ions and surfactants affecting tannase yield indicated that manganese ions, stannum ions, xylene and SDS contained in the culture medium had positive effects on tannase production under submerged fermentation. Magnesium ions, in particular, could enhance the tannase yield by the mutant increasing by 42%, i.e. 53.6 U/mL. Accordingly, low-energy ion implantation could be a desirable approach to improve the fungal tannase yield for its commercial application.

Rapid determination of actinides in seawater samples

International Nuclear Information System (INIS)

Maxwell, S.L.; Culligan, B.K.; Hutchison, J.B.; Utsey, R.C.; McAlister, D.R.

2014-01-01

A new rapid method for the determination of actinides in seawater samples has been developed at the Savannah River National Laboratory. The actinides can be measured by alpha spectrometry or inductively-coupled plasma mass spectrometry. The new method employs novel pre-concentration steps to collect the actinide isotopes quickly from 80 L or more of seawater. Actinides are co-precipitated using an iron hydroxide co-precipitation step enhanced with Ti +3 reductant, followed by lanthanum fluoride co-precipitation. Stacked TEVA Resin and TRU Resin cartridges are used to rapidly separate Pu, U, and Np isotopes from seawater samples. TEVA Resin and DGA Resin were used to separate and measure Pu, Am and Cm isotopes in seawater volumes up to 80 L. This robust method is ideal for emergency seawater samples following a radiological incident. It can also be used, however, for the routine analysis of seawater samples for oceanographic studies to enhance efficiency and productivity. In contrast, many current methods to determine actinides in seawater can take 1-2 weeks and provide chemical yields of ∼30-60 %. This new sample preparation method can be performed in 4-8 h with tracer yields of ∼85-95 %. By employing a rapid, robust sample preparation method with high chemical yields, less seawater is needed to achieve lower or comparable detection limits for actinide isotopes with less time and effort. (author)

The suitability of the IOM foam sampler for bioaerosol sampling in Occupational Environments.

Science.gov (United States)

Haatainen, Susanna; Laitinen, Juha; Linnainmaa, Markku; Reponen, Tiina; Kalliokoski, Pentti

2010-01-01

Concurrent samples were collected with Andersen and IOM foam samplers to determine whether if the IOM foam sampler can be applied to collect culturable microorganisms. Two different kinds of aerosols were studied: peat dust in a power plant and mist from coolant fluid aerosolized during grinding of blades and rollers in a paper mill. In the power plant, the concentrations of fungi were 2-3 times higher in the IOM samples than in the Andersen samples. However, more fungal genera were identified in the latter case. The methods yielded similar concentrations of bacteria and actinobacteria in the power plant. On the other hand, the performance of the IOM foam sampler was very poor in the paper mill, where stress-sensitive gram-negative bacteria dominated; low concentration of bacteria was detected in only one IOM sample even though the concentration of bacteria often exceeded even the upper detection limit in the Andersen impactor samples. It could be concluded that the IOM foam sampler performs quite well for collecting inhalable fungi and actinobacteria. However, the Andersen sampler provides better information on fungal genera and concentrations of gram-negative bacteria. Personal sampling with the IOM foam sampler provided an important benefit in the power plant, where the concentration ratio of personal to stationary samples was much higher for bacteria than for inhalable or respirable dust.

Tradeoffs between vigor and yield for crops grown under different management systems

Science.gov (United States)

Simic Milas, Anita; Keller Vincent, Robert; Romanko, Matthew; Feitl, Melina; Rupasinghe, Prabha

2016-04-01

Remote sensing can provide an effective means for rapid and non-destructive monitoring of crop status and biochemistry. Monitoring pattern of traditional vigor algorithms generated from Landsat 8 OLI satellite data represents a robust method that can be widely used to differentiate the status of crops, as well as to monitor nutrient uptake functionality of differently treated seeds grown under different managements. This study considers 24 factorial parcels of winter wheat in 2013, corn in 2014, and soybeans in 2015, grown under four different types of agricultural management. The parcels are located at the Kellogg Biological Station, Long-Term Ecological Research site in the State of Michigan USA. At maturity, the organic crops exhibit significantly higher vigor and significantly lower yield than conventionally managed crops under different treatments. While organic crops invest in their metabolism at the expense of their yield, the conventional crops manage to increase their yield at the expense of their vigor. Landsat 8 OLI is capable of 1) differentiating the biochemical status of crops under different treatments at maturity, and 2) monitoring the tradeoff between crop yield and vigor that can be controlled by the seed treatments and proper conventional applications, with the ultimate goal of increasing food yield and food availability, and 3) distinguishing between organic and conventionally treated crops. Timing, quantity and types of herbicide applications have a great impact on early and pre-harvest vigor, maturity and yield of conventionally treated crops. Satellite monitoring using Landsat 8 is an optimal tool for coordinating agricultural applications, soil practices and genetic coding of the crop to produce higher yield as well as have early crop maturity, desirable in northern climates.

Frequency of cardiac arrhythmias in high and low- yielding dairy cows

Directory of Open Access Journals (Sweden)

Afshin Jafari Dehkordi

2014-06-01

Full Text Available Electrocardiography (ECG may be used to recognize cardiac disorders. Levels of milk production may change the serum electrolytes which its imbalance has a role in cardiac arrhythmia. Fifty high yielding and fifty low yielding Holstein dairy cows were used in this study. Electrocardiography was recorded by base-apex lead and blood samples were collected from jugular vein for measurement of serum elements such as sodium, potassium, calcium, phosphorous, iron and magnesium. Cardiac dysrhythmias were detected more frequent in low yielding Holstein cows (62.00% compared to high yielding Holstein cows (46.00%. The cardiac dysrhythmias that were observed in low yielding Holstein cows included sinus arrhythmia (34.70%, wandering pacemaker (22.45 %, bradycardia (18.37%, tachycardia (10.20%, atrial premature beat (2.04%, sinoatrial block (2.04%, atrial fibrillation (8.16% and atrial tachycardia (2.04%. The cardiac dysrhythmias were observed in high yielding Holstein cows including, sinus arrhythmia (86.95% and wandering pacemaker (13.05%. Also, notched P wave was observed to be 30% and 14% in high- and low- yielding Holstein cows respectively. The serum calcium concentration of low yielding Holstein cows was significantly lower than that of high yielding Holstein cows. There was not any detectable significant difference in other serum elements between high- and low- yielding Holstein cows. Based on the result of present study, could be concluded that low serum concentration of calcium results to more frequent dysrhythmias in low yielding Holstein cows.

Yields of base damage products in crystalline DNA produced by the direct-type effect

International Nuclear Information System (INIS)

Gilbert, D.C.; Bernhard, W.A.; Swarts, S.G.

2003-01-01

Our aim is to determine the yields of base damage products due to direct-type effects in well-defined DNA samples. The sample, crystalline d(GCACGCGTGC) 2 , which contains Co(III), has been structurally characterized by others using X-ray crystallography and the free radical yields measured by our laboratory using EPR spectroscopy. Polycrystalline samples were x-irradiated (70 KeV) at room temperature (RT) to doses up to 150 kGy. Following dissolution under air, the base products were identified and quantified using GC-MS. 7,8-dihydro-8-oxoguanine (8-oxo-G) is the primary base damage product found, with a yield of ∼0.09 μmoles/J, whereas 2,6-diamino-4-oxo-5-formamidopyrimidine (FpyG) was below the limits of detection of the GC-MS assay. Radiation yields for 5,6-dihydrothymine (DHT) and 5-hydroxymethyluracil of 0.0017 and 0.0042 μmoles/J, respectively, were also observed. These results differ from those obtained in a previous study of solid-state hydrated DNA irradiated at RT (Swarts et al., Radiat. Res. 145: 304-14, 1996), where the yields of FpyG and DHT were approximately 11% and 20% that of 8-oxo-G, respectively. Our working hypothesis is that Co(III) in crystalline d(GCACGCGTGC) 2 modifies the product distribution. Based on the EPR data, the influence of Co(III) on the initial distribution of radical trapping is negligible. This suggests that electron transfer from the pyrimidines to Co(III) occurs either upon annealing and/or upon solvation, thereby competing with dihydropyrimidine formation. While strand break (sb) yields for d(GCACGCGTGC) 2 are not yet completed, in earlier work on crystals of other oligomers, we obtained sb yields of 0.06-0.16 μmoles/J. We anticipate, therefore, that the stoichiometry between 8-oxo-G and sb formation will be about 1:1

Agricultural land use doubled sediment yield of western China's rivers

Science.gov (United States)

Schmidt, A. H.; Bierman, P. R.; Sosa-Gonzalez, V.; Neilson, T. B.; Rood, D. H.; Martin, J.; Hill, M.

2017-12-01

Land use changes, such as deforestation and agriculture, increase soil erosion rates on the scale of hillslopes and small drainage basins; however, the effects of these changes on the sediment load in larger rivers is poorly quantified, with a few studies scattered globally, and only 10 data points in the world's most populous nation, China. At 20 different sites in western China, we compare contemporary (1945-1987) fluvial sediment yield data collected daily over 4 to 26 years (median = 19 years) to long-term measures of erosion (sediment generation) based on new isotopic measurements of in situ 10Be in river sediments. We find that median sediment transport at these sites exceeds background sediment generation rates by a factor of two (from 0.13 to 5.79 times, median 1.85 times) and that contemporary sediment yield is statistically significantly different from long-term sediment yield (p measured unsupported 210Pb and 137Cs in 130 detrital samples from throughout the region. We find that only 4 samples (those from high elevation, low relief watersheds) have detectable 137Cs and 31 samples have detectable unsupported 210Pb. The lack of 137Cs in most samples suggests high rates of erosion in the 1950s-1960s when 137Cs would have been delivered to the landscape. Detectable 210Pb in 25% of the watersheds suggests that in some areas erosion rates have slowed since that time allowing 210Pb to accumulate to measurable levels. Together, these data sets demonstrate that upstream agricultural land use has significantly increased sediment supply to rivers in western China, likely increasing turbidity and decreasing ecosystem services such as fisheries.

A crop model-based approach for sunflower yields

Directory of Open Access Journals (Sweden)

João Guilherme Dal Belo Leite

2014-10-01

Full Text Available Pushed by the Brazilian biodiesel policy, sunflower (Helianthus annuus L. production is becoming increasingly regarded as an option to boost farmers' income, particularly under semi-arid conditions. Biodiesel related opportunities increase the demand for decision-making information at different levels, which could be met by simulation models. This study aimed to evaluate the performance of the crop model OILCROP-SUN to simulate sunflower development and growth under Brazilian conditions and to explore sunflower water- and nitrogen-limited, water-limited and potential yield and yield variability over an array of sowing dates in the northern region of the state of Minas Gerais, Brazil. For model calibration, an experiment was conducted in which two sunflower genotypes (H358 and E122 were cultivated in a clayey soil. Growth components (leaf area index, above ground biomass, grain yield and development stages (crop phenology were measured. A database composed of 27 sunflower experiments from five Brazilian regions was used for model evaluation. The spatial yield distribution of sunflower was mapped using ordinary kriging in ArcGIS. The model simulated sunflower grain productivity satisfactorily (Root Mean Square Error ≈ 13 %. Simulated yields were relatively high (1,750 to 4,250 kg ha-1 and the sowing window was fairly wide (Oct to Feb for northwestern locations, where sunflower could be cultivated as a second crop (double cropping at the end of the rainy season. The hybrid H358 had higher yields for all simulated sowing dates, growth conditions and selected locations.

Membrane bioreactor biomass characteristics and microbial yield at ...

African Journals Online (AJOL)

In this study, a laboratory-scale MBR and SBR were operated in parallel and at very low MCRTs (3 d, 2 d, 1 d and 0.5 d) to assess the relative bioreactor performance, biomass characteristics, and microbial yield. This study confirmed that the MBR maintains higher solids levels and better overall effluent quality than ...

Determination of experimental K-shell fluorescence yield for ...

Indian Academy of Sciences (India)

calcium compounds using a Si(Li) X-ray detector system (FWHM=5.96 keV at 160 eV). The samples were excited by 5.96 keV photons produced by a 55Fe radioisotope source. The experimental values are systematically lower than the theoretical values. Keywords. X-ray; fluorescence yield; cross-section and chemical ...

Modelling crop yield in Iberia under drought conditions

Science.gov (United States)

Ribeiro, Andreia; Páscoa, Patrícia; Russo, Ana; Gouveia, Célia

2017-04-01

The improved assessment of the cereal yield and crop loss under drought conditions are essential to meet the increasing economy demands. The growing frequency and severity of the extreme drought conditions in the Iberian Peninsula (IP) has been likely responsible for negative impacts on agriculture, namely on crop yield losses. Therefore, a continuous monitoring of vegetation activity and a reliable estimation of drought impacts is crucial to contribute for the agricultural drought management and development of suitable information tools. This works aims to assess the influence of drought conditions in agricultural yields over the IP, considering cereal yields from mainly rainfed agriculture for the provinces with higher productivity. The main target is to develop a strategy to model drought risk on agriculture for wheat yield at a province level. In order to achieve this goal a combined assessment was made using a drought indicator (Standardized Precipitation Evapotranspiration Index, SPEI) to evaluate drought conditions together with a widely used vegetation index (Normalized Difference Vegetation Index, NDVI) to monitor vegetation activity. A correlation analysis between detrended wheat yield and SPEI was performed in order to assess the vegetation response to each time scale of drought occurrence and also identify the moment of the vegetative cycle when the crop yields are more vulnerable to drought conditions. The time scales and months of SPEI, together with the months of NDVI, better related with wheat yield were chosen to perform a multivariate regression analysis to simulate crop yield. Model results are satisfactory and highlighted the usefulness of such analysis in the framework of developing a drought risk model for crop yields. In terms of an operational point of view, the results aim to contribute to an improved understanding of crop yield management under dry conditions, particularly adding substantial information on the advantages of combining

VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

African Journals Online (AJOL)

journal

Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.

Satellite-based studies of maize yield spatial variations and their causes in China

Science.gov (United States)

Zhao, Y.

2013-12-01

Maize production in China has been expanding significantly in the past two decades, but yield has become relatively stagnant in the past few years, and needs to be improved to meet increasing demand. Multiple studies found that the gap between potential and actual yield of maize is as large as 40% to 60% of yield potential. Although a few major causes of yield gap have been qualitatively identified with surveys, there has not been spatial analysis aimed at quantifying relative importance of specific biophysical and socio-economic causes, information which would be useful for targeting interventions. This study analyzes the causes of yield variation at field and village level in Quzhou county of North China Plain (NCP). We combine remote sensing and crop modeling to estimate yields in 2009-2012, and identify fields that are consistently high or low yielding. To establish the relationship between yield and potential factors, we gather data on those factors through a household survey. We select targeted survey fields such that not only both extremes of yield distribution but also all soil texture categories in the county is covered. Our survey assesses management and biophysical factors as well as social factors such as farmers' access to agronomic knowledge, which is approximated by distance to the closest demonstration plot or 'Science and technology backyard'. Our survey covers 10 townships, 53 villages and 180 fields. Three to ten farmers are surveyed depending on the amount of variation present among sub pixels of each field. According to survey results, we extract the amount of variation within as well as between villages and or soil type. The higher within village or within field variation, the higher importance of management factors. Factors such as soil type and access to knowledge are more represented by between village variation. Through regression and analysis of variance, we gain more quantitative and thorough understanding of causes to yield variation at

Effects of supplemental irrigation on water consumption characteristics and grain yield in different wheat cultivars

Directory of Open Access Journals (Sweden)

Meng Weiwei

2015-06-01

Full Text Available Shortage of water resources is a major limiting factor for wheat (Triticum aestivum L. production in the North China Plain. The objectives of this study were to evaluate the effects of supplemental irrigation (SI on water use characteristics and grain yield of the wheat cultivars 'Jimai 22'and 'Zhouyuan 9369'. Two supplemental irrigation treatment regimens were designed based on target relative soil moisture contents in 0-140 cm soil layers at jointing rising to 75% of field capacity (FC for each cultivar, and at anthesis rising to 65% and 75% (W1, and 70% and 80% (W2 in 2009-2010 and 2010-2011, respectively. Rain-fed (W0 treatment was used as control. Under W1, grain yield of 'Jimai 22' was 5.22% higher than that of W2, and water use efficiency (WUE of 'Zhouyuan 9369' was 4.0% higher than that under W2. No significant differences in WUE of 'Jimai 22' and grain yield of 'Zhouyuan 9369' were observed for the two treatment regimens in 2009-2010. Grain yield and WUE in W1 were higher than those of W2 for both cultivars in 2010-2011. W1 enhanced soil water consumption compared to W2, especially in the 100-200 cm soil layers, for both cultivars in 2009-2011. Meanwhile, 'Jimai 22' showed higher soil water consumption and ET from anthesis to mature stage, which resulted in increase in grain yield and WUE of 'Jimai 22' by 8.15-21.7% and 7.75-11.73% in 2009-2010 and 2010-2011, respectively, compared with 'Zhouyuan 9369'. Thus, our results showed that SI increased the yield and WUE of 'Jimai 22' and W1 was the better treatment regimen.

Influence of Previous Crop on Durum Wheat Yield and Yield Stability in a Long-term Experiment

Directory of Open Access Journals (Sweden)

Anna Maria Stellacci

2011-02-01

Full Text Available Long-term experiments are leading indicators of sustainability and serve as an early warning system to detect problems that may compromise future productivity. So the stability of yield is an important parameter to be considered when judging the value of a cropping system relative to others. In a long-term rotation experiment set up in 1972 the influence of different crop sequences on the yields and on yield stability of durum wheat (Triticum durum Desf. was studied. The complete field experiment is a split-split plot in a randomized complete block design with two replications; the whole experiment considers three crop sequences: 1 three-year crop rotation: sugar-beet, wheat + catch crop, wheat; 2 one-year crop rotation: wheat + catch crop; 3 wheat continuous crop; the split treatments are two different crop residue managements; the split-split plot treatments are 18 different fertilization formulas. Each phase of every crop rotation occurred every year. In this paper only one crop residue management and only one fertilization treatment have been analized. Wheat crops in different rotations are coded as follows: F1: wheat after sugar-beet in three-year crop rotation; F2: wheat after wheat in three-year crop rotation; Fc+i: wheat in wheat + catch crop rotation; Fc: continuous wheat. The following two variables were analysed: grain yield and hectolitre weight. Repeated measures analyses of variance and stability analyses have been perfomed for the two variables. The stability analysis was conducted using: three variance methods, namely the coefficient of variability of Francis and Kannenberg, the ecovalence index of Wricke and the stability variance index of Shukla; the regression method of Eberhart and Russell; a method, proposed by Piepho, that computes the probability of one system outperforming another system. It has turned out that each of the stability methods used has enriched of information the simple variance analysis. The Piepho�

Potato yield and quality as a function of the plant density

Directory of Open Access Journals (Sweden)

Eero Varis

1975-05-01

Full Text Available The effects of potato plant density on yield quantity and quality were investigated at the Hankkija Plant Breeding Institute from 1971-73, using seed rates of 1600, 3200 and 4800 kg/ha, and seed sizes of 40, 80 and 120 g. The varieties used were Ijsselster and Record. The number of stems per m2 rose with increasing seed rate and with increasing seed size. Stem number increased with seed rate faster for small seed than for large. The response in stem number was greater for Ijsselster than for Record. The number of stems per seed tuber fell as the plant density rose. The number of tubers per m2 altered in the same direction as the number of stems, but less responsively. The reason for this was that the number of tubers per stem decreased with increasing plant density. The tuber yield showed a continual increase with increasing plant density. At the lowest stem densities (less than 20—25 stems/m2 small seed gave better results than other sizes, but at the higher plant densities, the importance of seed size faded away and the yield was dependant on the plant density alone. Net yield (gross yield 2 x seed rate, however, was higher the smaller the seed used, whatever the stem density. Tuber size decreased when plant density increased, the proportion of large tubers diminishing most, especially when small seed was used. The proportion of small tubers altered more for Ijsselster than for Record. Seed size and seed rate did not on average significantly affect the proportion of Class I potatoes, though small seed gave results slightly better than other sizes. The starch content of the yield rose when the seed rate was increased (16.0-16.3 -16.5 % and fell with increasing seed size (16.5 16.2 16.1 %. The maximum variation was 15.8-16.7 %. The specific gravity distribution improved with increasing plant density. Raw discolouration of the tubers did not alter significantly as the plant density rose. Blackening of the tubers decreased with increasing plant

Fission product yields

International Nuclear Information System (INIS)

Valenta, V.; Hep, J.

1978-01-01

Data are summed up necessary for determining the yields of individual fission products from different fissionable nuclides. Fractional independent yields, cumulative and isobaric yields are presented here for the thermal fission of 235 U, 239 Pu, 241 Pu and for fast fission (approximately 1 MeV) of 235 U, 238 U, 239 Pu, 241 Pu; these values are included into the 5th version of the YIELDS library, supplementing the BIBFP library. A comparison is made of experimental data and possible improvements of calculational methods are suggested. (author)

Effects of Plant Density on Sweet and Baby Corn (Hybrid KSC 403 Yield and Yield Components

Directory of Open Access Journals (Sweden)

H Bavi

2016-07-01

GlM procedure. Means of all treatments were comprised using least significant difference (LSD at 5 % probability level. Results and Discussion The effects of plant density on yield components of baby corn was significant. Increasing the plant densities increased the ear number and percentage of non-standard ears. The Highest yield of ear without husk, standard and non-standard were obtained (2649.5, 766.97, and 3043.9 kg.ha-1, respectively with 13 plants.m-2. In sweet corn, increasing plant density from 7 to 13 plants.m-2, decreased row per ear, grain per row and thousand grain weight. Highest grain yield (1232.5 kg ha-1 and green ear (12607.2 kg ha-1 of sweet corn were obtained with plant density of 9.m-2. Conclusions Analysis of correlation showed that in both baby and sweet corn, there were positive and significant correlations between yield and its components. There was the high number of non-standard ears in all experimental treatments. In sweet corn, the standard ear without husk yield has positive and significant correlation with all traits except the percentage of standard ear and sheathed ear weight. In addition, unsuitable climate conditions during silking stage reduced the yield of sweet corn through the high number of aborted florets. Yield of sweet corn yield showed negative and significant correlation with grain row per ear and grain per row. However, increasing the ear number.m-2 increased yield in higher plant densities up to 9 plant.m-2 density. Generally, the baby corn had high yield with good quality in this region, but, standard ear percent of the baby corn of the hybrid KSC 403 was very low. On the other hand, sweet corn grain yield was low due to high air temperatures during pollination and maturity stages.

Responses of Winter Wheat Yields to Warming-Mediated Vernalization Variations Across Temperate Europe

Directory of Open Access Journals (Sweden)

Xiuchen Wu

2017-10-01

Full Text Available Rapid climate warming, with much higher warming rates in winter and spring, could affect the vernalization fulfillment, a critical process for induction of crop reproductive growth and consequent grain filling in temperate winter crops. However, regional observational evidence of the effects of historical warming-mediated vernalization variations on temperate winter crop yields is lacking. Here, we statistically quantified the interannual sensitivity of winter wheat yields to vernalization degree days (VDD during 1975–2009 and its spatial relationship with multi-year mean VDD over temperate Europe (TE, using EUROSTAT crop yield statistics, observed and simulated crop phenology data and gridded daily climate data. Our results revealed a pervasively positive interannual sensitivity of winter wheat yields to variations in VDD (γVDD over TE, with a mean γVDD of 2.8 ± 1.5 kg ha−1 VDD−1. We revealed a significant (p < 0.05 negative exponential relationship between γVDD and multi-year mean VDD for winter wheat across TE, with higher γVDD in winter wheat planting areas with lower multi-year mean VDD. Our findings shed light on potential vulnerability of winter wheat yields to warming-mediated vernalization variations over TE, particularly considering a likely future warmer climate.

Nutritional status of high yielding crossbred cow around parturition

Directory of Open Access Journals (Sweden)

Mohammad Yousuf

2016-03-01

Materials and methods: Nutritional status of cows around the peri-parturient period was investigated for six months in dairy farm. Seven to eight months' pregnant cows were selected for this study. Blood samples from 24 randomly selected cows were collected at stage-1, -2 and -3. The serum was stored at -20C until analyzing glucose, total protein (TP, albumin (Alb, triglycerides (Tg, cholesterol, high density lipoprotein (HDL, low density lipoprotein (LDL, calcium (Ca, magnesium (Mg and phosphorus (P. Results: An increasing trend of glucose level was evidenced (P=0.07 during stage-1. Instead, higher levels of TP were found during stage-3 as compared to the stage-1 and -2. The Alb levels differed significantly (P<0.01 among different stages. A significantly increased (P<0.01 cholesterol, Tg, and HDL were found after parturition (stage-2 and -3 than before parturition (stage-1. LDL was significantly (P=0.02 increased during stage-2 and -3. A significantly higher level of Ca (P<0.01, Mg (P<0.01 and P (P=0.03 were present during stage-1. Glucose, TP, cholesterol and Tg were significantly higher (P<0.01 in cows two months after parturition, while Alb was found to be the highest (P<0.01 in cows immediately after parturition. An increasing trend of LDL (P=0.07 and HDL (P=0.07 were found in the cows two months after parturition. However, Ca levels were significantly (P=0.04 higher in cows two months after parturition. Conclusion: The results indicate that there is alteration of biochemical levels among the study population at three different stages, and these data may be helpful in using the necessary nutrients to the the high yielding cows around their parturition. [J Adv Vet Anim Res 2016; 3(1.000: 68-74

Synthesis of crystalline Ce-activated garnet phosphor powders and technique to characterize their scintillation light yield

Science.gov (United States)

Gordienko, E.; Fedorov, A.; Radiuk, E.; Mechinsky, V.; Dosovitskiy, G.; Vashchenkova, E.; Kuznetsova, D.; Retivov, V.; Dosovitskiy, A.; Korjik, M.; Sandu, R.

2018-04-01

This work reports on a process of preparation of garnet phosphor powders and a technique for light yield evaluation of strongly light scattering samples. Powders of scintillation compounds could be used as individual materials or as samples for express tests of scintillation properties. However, estimation of their light yield (LY) is complicated by strong light scattering of this kind of materials. Ce3+-activated yttrium-aluminum and gallium-gadolinium-aluminum garnet phosphor powders, Y3Al5O12 (YAG:Ce) and Gd3Ga3Al2O12 (GGAG:Ce), were obtained using a modified coprecipitation technique. Ga tends to residue in mother liquor in ammonia media, but the modification allows to avoid the loss of components. We propose an approach for sample preparation and LY measurement setup with alpha particles excitation, allowing to decrease light scattering influence and to estimate a light yield of powder samples. This approach is used to evaluate the obtained powders.

Assessment of genetic diversity in tomato for fruit morphology, composition and yield

International Nuclear Information System (INIS)

Zaif, K.; Amjad, M.; Saeed, A.

2016-01-01

Postharvest losses are of great concern in vegetable crops, including tomato, due to their perishable nature. Damage to tomato fruit during transportation is related to its shape besides other factors. Therefore, this study was conducted to assess genetic diversity in the available tomato germplasm (35 genotypes) for fruit morphology, biochemical composition and yield. Considerable variation was observed for all studied traits except number of locules per fruit, TSS and reducing sugars, for which very low range was recorded. While, moderate level of variation existed for stem-end blockiness, blossom-end blockiness and elongated shape which suggested that fruit of most of the varieties could belong to more than one category of fruit shape. Fruit length and diameter had significantly positive correlation with heart shape of tomato, while later was also correlated with blossom-end-blockiness. Heart shape of tomato fruit was also correlated with stem-end blockiness. Yield showed significantly positive correlation with number of inflorescence per plant. Principal component analysis (PCA) revealed PC-I to PC-VI had Eigen values >1, which contributed 73.86% of total variability for different traits. The highest factor loading values for blossom-end-blockiness, stem-end-blockiness, heart shape and elongated shape was recorded in PC-6, PC-4, PC-6 and PC-2, respectively. Thirty five genotypes were grouped into three clusters. Higher yield and stem-end-blockiness was observed in genotypes from cluster II, while higher values for blossom-end-blockiness, heart shape and elongated shape were noticed in cluster I followed by cluster III. So, it can be assumed that genotypes in cluster II showed higher yield and also possessed blocky fruit, a desirable character for transportation and processing purpose. Moreover, it is suggested that genotypes of cluster I and cluster II can be crossed to find heterosis for yield and fruit shape related traits. (author)

Simulating maize yield and bomass with spatial variability of soil field capacity

Science.gov (United States)

Ma, Liwang; Ahuja, Lajpat; Trout, Thomas; Nolan, Bernard T.; Malone, Robert W.

2015-01-01

Spatial variability in field soil properties is a challenge for system modelers who use single representative values, such as means, for model inputs, rather than their distributions. In this study, the root zone water quality model (RZWQM2) was first calibrated for 4 yr of maize (Zea mays L.) data at six irrigation levels in northern Colorado and then used to study spatial variability of soil field capacity (FC) estimated in 96 plots on maize yield and biomass. The best results were obtained when the crop parameters were fitted along with FCs, with a root mean squared error (RMSE) of 354 kg ha–1 for yield and 1202 kg ha–1 for biomass. When running the model using each of the 96 sets of field-estimated FC values, instead of calibrating FCs, the average simulated yield and biomass from the 96 runs were close to measured values with a RMSE of 376 kg ha–1 for yield and 1504 kg ha–1 for biomass. When an average of the 96 FC values for each soil layer was used, simulated yield and biomass were also acceptable with a RMSE of 438 kg ha–1 for yield and 1627 kg ha–1 for biomass. Therefore, when there are large numbers of FC measurements, an average value might be sufficient for model inputs. However, when the ranges of FC measurements were known for each soil layer, a sampled distribution of FCs using the Latin hypercube sampling (LHS) might be used for model inputs.

Making biodiversity-friendly cocoa pay: combining yield, certification, and REDD for shade management.

Science.gov (United States)

Waldron, A; Justicia, R; Smith, L E

2015-03-01

The twin United Nations' Millennium Development Goals of biodiversity preservation and poverty reduction both strongly depend on actions in the tropics. In particular, traditional agroforestry could be critical to both biological conservation and human livelihoods in human-altered rainforest areas. However, traditional agroforestry is rapidly disappearing, because the system itself is economically precarious, and because the forest trees that shade traditional crops are now perceived to be overly detrimental to agricultural yield. Here, we show a case where the commonly used agroforestry shade metric, canopy cover, would indeed suggest complete removal of shade trees to maximize yield, with strongly negative biodiversity and climate implications. However, a yield over 50% higher was achievable if approximately 100 shade trees per hectare were planted in a spatially organized fashion, a win-win for biodiversity and the smallholder. The higher yield option was detected by optimizing simultaneously for canopy cover, and a second shade metric, neighboring tree density, which was designed to better capture the yield value of ecological services flowing from forest trees. Nevertheless, even a 50% yield increase may prove insufficient to stop farmers converting away from traditional agroforestry. To further increase agroforestry rents, we apply our results to the design of a sustainable certification (eco-labelling) scheme for cocoa-based products in a biodiversity hotspot, and consider their implications for the use of the United Nations REDD (reducing emissions from deforestation and forest degradation) program in agroforestry systems. Combining yield boost, certification, and REDD has the potential to incentivize eco-friendly agroforestry and lift smallholders out of poverty, simultaneously.

Effects of Methanol Spraying on Qualitative traits, Yield and Yield Components of Soybean (Glycine max L. under Drought Stress Conditions

Directory of Open Access Journals (Sweden)

J Esazadeh Panjali Kharabasi

2017-12-01

spraying. By increasing drought stress, proline content increased, while other traits were decreased and 70 percentage of available soil moisture depletion decreased the seed yield by 51.2%over than the control. With increasing of methanol spraying to 21 of volumetric percentage, all the investigate traits, except the proline content increased and increasing the volumetric percentage methanol more than it, was reduces them. The maximum amounts of quantity traits and stomatal conductance of soybean obtained at 21 volumetric percentage of methanol spraying, and the seed yield of this treatment was 25.6%higher than the control . These results are in agreement with those obtained by Purmousavi et al., (2009, Ruhul Amin et al., (2009, Shahmoradi et al., (2009 and Ibrahim and Kandil, (2007, who found that deficit irrigation, caused a significant decrease in yield and yield components of soybean. In general, irrigation decreasing may be lead to reducing photosynthesis activity and induce imbalanced relations between plant hormones and biological processes in the plant organs as a whole. These conditions in the treated soil are undoubtedly of great importance throughout the vegetative growth and dry matter accumulation in soybean plants. Drought stress reduces leaf size, stem extension and root proliferation; it disturbs plant water relations as well as dry matter production (Farooq et al., 2009. Conclusions In general, the results of experiment showed that the maximum amounts of quantitative traits, stomatal conductance and proline content of soybean, obtained by 21 volumetric percentage of methanol spraying and by this treatment, the seed yield was 25.6 % higher than control.

Influence of levels of nitrogen and management on seed cotton yield and 15N recovery by cotton

International Nuclear Information System (INIS)

Arulmozhiselvan, K.; Govindaswamy, M.

1999-01-01

Cotton var.MCU.5 showed varied response to N levels under different management practices. Higher yields were associated at 60-80 kg N ha -1 under combined application of urea, FYM and azospirillum. Whereas urea alone registered higher yield at 100-120 kg N ha -1 , high 15 N recovery (35.84%) was found to be associated with urea + FYM combination. (author)

Optimization of MR fluid Yield stress using Taguchi Method and Response Surface Methodology Techniques

Science.gov (United States)

Mangal, S. K.; Sharma, Vivek

2018-02-01

Magneto rheological fluids belong to a class of smart materials whose rheological characteristics such as yield stress, viscosity etc. changes in the presence of applied magnetic field. In this paper, optimization of MR fluid constituents is obtained with on-state yield stress as response parameter. For this, 18 samples of MR fluids are prepared using L-18 Orthogonal Array. These samples are experimentally tested on a developed & fabricated electromagnet setup. It has been found that the yield stress of MR fluid mainly depends on the volume fraction of the iron particles and type of carrier fluid used in it. The optimal combination of the input parameters for the fluid are found to be as Mineral oil with a volume percentage of 67%, iron powder of 300 mesh size with a volume percentage of 32%, oleic acid with a volume percentage of 0.5% and tetra-methyl-ammonium-hydroxide with a volume percentage of 0.7%. This optimal combination of input parameters has given the on-state yield stress as 48.197 kPa numerically. An experimental confirmation test on the optimized MR fluid sample has been then carried out and the response parameter thus obtained has found matching quite well (less than 1% error) with the numerically obtained values.

yield and yield componemts of extra early maize (zea mays l.)

African Journals Online (AJOL)

SHARIFAI

maize crop and improve the soil structures and chemical nutrients of the soil. The significant interaction between intra-row spacing and poultry manure on cob diameter, 100 grain weight and grain yield showed the importance of poultry manure on yield and yield components of maize crop. Poultry manure increases both ...

An adapted yield criterion for the evolution of subsequent yield surfaces

Science.gov (United States)

Küsters, N.; Brosius, A.

2017-09-01

In numerical analysis of sheet metal forming processes, the anisotropic material behaviour is often modelled with isotropic work hardening and an average Lankford coefficient. In contrast, experimental observations show an evolution of the Lankford coefficients, which can be associated with a yield surface change due to kinematic and distortional hardening. Commonly, extensive efforts are carried out to describe these phenomena. In this paper an isotropic material model based on the Yld2000-2d criterion is adapted with an evolving yield exponent in order to change the yield surface shape. The yield exponent is linked to the accumulative plastic strain. This change has the effect of a rotating yield surface normal. As the normal is directly related to the Lankford coefficient, the change can be used to model the evolution of the Lankford coefficient during yielding. The paper will focus on the numerical implementation of the adapted material model for the FE-code LS-Dyna, mpi-version R7.1.2-d. A recently introduced identification scheme [1] is used to obtain the parameters for the evolving yield surface and will be briefly described for the proposed model. The suitability for numerical analysis will be discussed for deep drawing processes in general. Efforts for material characterization and modelling will be compared to other common yield surface descriptions. Besides experimental efforts and achieved accuracy, the potential of flexibility in material models and the risk of ambiguity during identification are of major interest in this paper.

Farm size, land yields, and the agricultural production function: an analysis for fifteen developing countries

Energy Technology Data Exchange (ETDEWEB)

Cornia, G A

1985-04-01

This paper analyzes the relationship between factor inputs, land yields, and labor productivity for farms of different size on the basis of FAO farm management data for 15 developing countries. For all but three countries a strong negative correlation is found between farm size on the one side, and factor inputs and yields per hectare on the other. The fitting of unconstrained production functions to the above data suggests that in only few cases can the decline in yields for increasing farm size be attributed to decreasing returns to scale. The higher yields observed in small farms are mainly to be ascribed to higher factor inputs and to a more intensive use of land. Therefore, where conspicuous labor surpluses exist, the superiority of small farming provides solid arguments in favor of land redistribution. Such an agrarian reform would determine higher output, higher labor absorption and a more equitable income distribution, thus contributing in a decisive manner to the alleviation of rural poverty. The paper also provides estimates of cross-sectional production functions for the 15 countries analyzed. Empirical relations are found between the output elasticities of land, labor, and intermediate inputs and physical indicators of their scarcity. The paper concludes by proposing a simple method for deriving a long-term production function for agriculture. 23 references, 3 figures, 6 tables.

Zero tillage: A potential technology to improve cotton yield

Directory of Open Access Journals (Sweden)

Abbas Hafiz Ghazanfar

2016-01-01

Full Text Available Zero tillage technology revealed with no use of any soil inverting technique to grow crops. The crop plant seed is planted in the soil directly after irrigation to make the soil soft without any replenishing in soil layers. A study was conducted to evaluate cotton genotypes FH-114 and FH-142 for the consecutive three years of growing seasons from 2013-15. The seed of both genotypes was sown with two date of sowing, 1 March and 1 May of each three years of sowing under three tillage treatments (zero tillage, minimum tillage and conventional tillage in triplicate completely randomized split-split plot design. It was found from results that significant differences were recorded for tillage treatments, date of sowing, genotypes and their interactions. Multivariate analysis was performed to evaluate the yield and it attributed traits for potential of FH-114 and FH-142 cotton genotypes. The genotype FH-142 was found with higher and batter performance as compared to FH-114 under zero tillage, minimum tillage and conventional tillage techniques. The traits bolls per plant, boll weight, fibre fineness, fibre strength, plant height, cotton yield per plant and sympodial branches per plant were found as most contributing traits towards cotton yield and production. It was also found that FH-142 gives higher output in terms of economic gain under zero tillage with 54% increase as compared to conventional tillage technique. It was suggested that zero tillage technology should be adopted to improve cotton yield and quality. It was also recommended that further study to evaluate zero tillage as potential technology should be performed with different regions, climate and timing throughout the world.

Crop yield response to water stress imposed at different growth stages

International Nuclear Information System (INIS)

Iqbal, M.; Mahmood Shah, M.; Wisal, M.

1995-01-01

Potato requires sufficient soil moisture and fertilization to produce high yields but the present water resoures are limited compared to the cultivable land, field experiments were conduced from 1991 to 1995 to study relationship between yield and crop water use as a function of water stress imposed at different growth stages. The irrigation treatments involved application of full and stress watering s selectively at four growth stages : Establishment , Flowering Tuber formation and ripening. In full watering, full water requirements of the crop were met, i.e., ET sub a = ET sub m whereas in stress watering about half the amount of full watering was applied, i.e., ET sub a < ET sub m. Changes in moisture content of the soil pre files after irrigation were monitored with the help of neutron moisture probe in order to compute ET sub a by the water balance method. The results obtained showed that the tuber yield was produced by full watering ( T 1) and the lowest by continuous stress watering (T 2). A plot of relative yield against relative evapotranspiration deficit revealed that ripening was the lest sensitive whereas early development followed by flowering the most sensitive growth stage to water stress. The crop water use efficiencies were generally higher in the treatments where a combination of normal and stress watering was applied compared to where all - normal watering s were applied. The traditional irrigation practice resulted in wasteful water application with relatively lower yields, hence the results from this project will have high value for the farming community to get this higher yields with scarce water resources. The studies with labelled fertilizer showed that planting and earthing - up were equally important growth stages of potato for applying fertilizer for its efficient utilization. 3 figs; 25 tabs; 12 refs (Author)

Isolation and characterization of higher metallofullerenes Ca@C92 ...

Indian Academy of Sciences (India)

Administrator

allofullerenes containing alkaline earth metal ions could be isolated although their relative yields are extremely low. Ca@C92 and Ca@C94 are also ... est cage size for lanthanide and alkaline earth higher metallofullerenes isolated and ... suming stage is to remove abundant hollow small cage fullerenes and enrich higher ...

Residual biogas yield of digestate from agricultural biogas plants; Restgaspotenzial in Gaerresten aus landwirtschaftlichen Biogasanlagen

Energy Technology Data Exchange (ETDEWEB)

Lehner, Andreas; Effenberger, Mathias; Kissel, Rainer; Gronauer, Andreas [Bayerische Landesanstalt fuer Landwirtschaft, Freising (Germany). Arbeitsgruppe Biogastechnologie und Reststoffmanagement

2009-07-01

To evaluate the residual biogas yield during storage, biogas tests at a temperature of 22 C were performed with samples of liquid digested residue from 15 agricultural biogas plants (BGP). Values of residual biogas yield between 0.3 and 1.3 % with respect to the biogas yield from the raw input materials were measured. For the two one-stage BGP, the value was about 1.2 %. For the two-stage plants, a residual biogas yield (RBY) of 0.9 % was determined as opposed to 0.4 % for the three-stage plants. With a single exception, the RBY was clearly below 1.0 % if the overall hydraulic retention time in the BGP was equal to or larger than 100 days. For the majority of samples, the residual biogas yield showed a positive correlation with the level of volatile fatty acids in the digestate. Since the real conditions in storage tanks cannot be simulated with a simple batch-test, the results are not representative for the actual biogas production and potential methane emissions from the digestate during open storage. (orig.)

Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... 7 × 7 incomplete diallel cross of seven wheat parents during the crop season of 2009 to 2010. Mean square of general ... Genetic background and yield traits of the seven parents. Parent. Pedigree. Released year ..... Correlation and path analysis for yield and yield contributing characters in wheat (Triticum ...

Rheology and TIC/TOC results of ORNL tank samples

International Nuclear Information System (INIS)

Pareizs, J. M.; Hansen, E. K.

2013-01-01

The Savannah River National Laboratory (SRNL)) was requested by Oak Ridge National Laboratory (ORNL) to perform total inorganic carbon (TIC), total organic carbon (TOC), and rheological measurements for several Oak Ridge tank samples. As received slurry samples were diluted and submitted to SRNL-Analytical for TIC and TOC analyses. Settled solids yield stress (also known as settled shear strength) of the as received settled sludge samples were determined using the vane method and these measurements were obtained 24 hours after the samples were allowed to settled undisturbed. Rheological or flow properties (Bingham Plastic viscosity and Bingham Plastic yield stress) were determined from flow curves of the homogenized or well mixed samples. Other targeted total suspended solids (TSS) concentrations samples were also analyzed for flow properties and these samples were obtained by diluting the as-received sample with de-ionized (DI) water

Violet-to-Blue Gain and Lasing from Colloidal CdS Nanoplatelets: Low-Threshold Stimulated Emission Despite Low Photoluminescence Quantum Yield

Energy Technology Data Exchange (ETDEWEB)

Diroll, Benjamin T.; Talapin, Dmitri V.; Schaller, Richard D.

2017-02-13

Amplified spontaneous emission (ASE) and lasing from solution-processed materials are demonstrated in the challenging violet-to-blue (430–490 nm) spectral region for colloidal nanoplatelets of CdS and newly synthesized core/shell CdS/ZnS nanoplatelets. Despite modest band-edge photoluminescence quantum yields of 2% or less for single excitons, which we show results from hole trapping, the samples exhibit low ASE thresholds. Furthermore, four-monolayer CdS samples show ASE at shorter wavelengths than any reported film of colloidal quantum-confined material. This work underlines that low quantum yields for single excitons do not necessarily lead to a poor gain medium. The low ASE thresholds originate from negligible dispersion in thickness, large absorption cross sections of 2.8 × 10–14 cm–2, and rather slow (150 to 300 ps) biexciton recombination. We show that under higher-fluence excitation, ASE can kinetically outcompete hole trapping. Using nanoplatelets as the gain medium, lasing is observed in a linear optical cavity. This work confirms the fundamental advantages of colloidal quantum well structures as gain media, even in the absence of high photoluminescence efficiency.

Fabrication of fluorographene nanosheets with high yield and good quality based on supercritical fluid-phase exfoliation

Energy Technology Data Exchange (ETDEWEB)

Chen, Qi; Ji, Yan; Zhang, Danying; Shi, Jia [Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, College of Chemical Engineering (China); Xiao, Yinghong, E-mail: yhxiao@njnu.edu.cn [Nanjing Normal University, Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, College of Chemistry and Materials Science (China); Che, Jianfei, E-mail: xiaoche@mail.njust.edu.cn [Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, College of Chemical Engineering (China)

2016-07-15

This article presents a novel and simple method of supercritical fluid-phase exfoliation to fabricate fluorographene (FG) nanosheets with high yield and good quality. After soaking with supercritical CO{sub 2} and glycol at 10 MPa and 50 °C for 24 h, fluoride graphite powder was exfoliated by the intercalated CO{sub 2} and glycol molecules during an abrupt depressurization step. Here, supercritical CO{sub 2} acted as a penetrant and glycol acted as a “molecular wedge” to exfoliate fluoride graphite very well. The properties of FG nanosheets were detected by TEM, AFM, UV spectra, FTIR, XPS, Raman spectra, and XRD, which show the possibility of producing thickness-controlled FG nanosheets by varying numbers of supercritical CO{sub 2} process and the high yield of pure FG nanosheets of 32 wt%, four times higher than that of the sample treated only by the traditional method of sonication. Its simplicity, high productivity, low cost, and short processing time make this technique suitable for large-scale manufacturing of FG nanosheets.

IFCC guideline for sampling, measuring and reporting ionized magnesium in plasma

DEFF Research Database (Denmark)

Rayana, M.C. Ben; Burnett, R.W.; Covington, A.K.

2008-01-01

Analyzers with ion-selective electrodes (ISEs) for ionized magnesium (iMg) should yield comparable and unbiased results for iMg. This IFCC guideline on sampling, measuring and reporting iMg in plasma provides a prerequisite to achieve this goal [in this document, "plasma" refers to circulating...... plasma and the forms in which it is sampled, namely the plasma phase of anticoagulated whole blood (or "blood"), plasma separated from blood cells, or serum]. The guideline recommends measuring and reporting ionized magnesium as a substance concentration relative to the substance concentration...... of magnesium in primary aqueous calibrants with magnesium, sodium, and calcium chloride of physiological ionic strength. The recommended name is "the concentration of ionized magnesium in plasma". Based on this guideline, results will be approximately 3% higher than the true substance concentration and 4...

Irrigation offsets wheat yield reductions from warming temperatures

Science.gov (United States)

Tack, Jesse; Barkley, Andrew; Hendricks, Nathan

2017-11-01

Temperature increases due to climate change are expected to cause substantial reductions in global wheat yields. However, uncertainty remains regarding the potential role for irrigation as an adaptation strategy to offset heat impacts. Here we utilize over 7000 observations spanning eleven Kansas field-trial locations, 180 varieties, and 29 years to show that irrigation significantly reduces the negative impact of warming temperatures on winter wheat yields. Dryland wheat yields are estimated to decrease about eight percent for every one-degree Celsius increase in temperature, yet irrigation completely offsets this negative impact in our sample. As in previous studies, we find that important interactions exist between heat stress and precipitation for dryland production. Here, uniquely, we observe both dryland and irrigated trials side-by-side at the same locations and find that precipitation does not provide the same reduction in heat stress as irrigation. This is likely to be because the timing, intensity, and volume of water applications influence wheat yields, so the ability to irrigate—rather than relying on rainfall alone—has a stronger influence on heat stress. We find evidence of extensive differences of water-deficit stress impacts across varieties. This provides some evidence of the potential for adapting to hotter and drier climate conditions using optimal variety selection. Overall, our results highlight the critical role of water management for future global food security. Water scarcity not only reduces crop yields through water-deficit stress, but also amplifies the negative effects of warming temperatures.

Yield risks in global maize markets: Historical evidence and projections in key regions of the world

Directory of Open Access Journals (Sweden)

Nelson B. Villoria

2018-03-01

Full Text Available Simultaneous worldwide crop failures stemming from a more unstable climate may reduce the scope for international trade to compensate food shortages and stabilize food prices across the various regions of the world. Understanding the effects of changes in crop productivity on global markets requires knowledge about the extent to which crop yields may be systematically related across producing and consuming centers. This short communication contributes to this knowledge by investigating the potential changes in the strength of two key sources of supply risks in global maize markets: yield variance and cross-country yield correlation. We focus on the largest producing and consuming countries of the world. We capitalize on yield projections from the Global Gridded Crop Model Intercomparison project. Exploratory analysis of the skill of the underlying GGCMI models in reproducing key moments of the distribution of observed yields reveals that they overstate observed variances but faithfully reproduce observed patterns of cross-country correlations. We find no evidence of an increase in the degree of cross-country dependency of maize yields. We also find a higher incidence of what would be considered extremely low maize yields by present-time standards stemming from the projected downward trend in yields levels toward mid-century. The weak dependency of maize yields across countries, an the possibility of reducing the higher incidence of extremes through policies aimed to reverse the climate-induced downward trends in yields, suggest that international trade can become a valuable tool to ameliorate the effects of more unstable crop yields. Keywords: Extremely low yields, Maize markets, Food prices, Agricultural yields, Systemic risk in agriculture, Global agriculture, AgMIP, Global gridded crop model intercomparison

Determination of the fission products yields, lanthanide and yttrium, in the fission of 238U with neutrons of fission spectra

International Nuclear Information System (INIS)

Nicoli, I.G.

1981-06-01

A radiochemical investigation is performed to measure the cumulative fission product yields of several lantanides and yttrium nuclides in the 238 U by fission neutron spectra. Natural and depleted uranium are irradiated under the same experimental conditions in order to find a way to subtract the contribution of the 235 U fission. 235 U percentage in the natural uranium was 3.5 times higher than in the depleted uranium. Uranium oxides samples are irradiated inside the core of the Argonaut Reactor, at the Instituto de Engenharia Nuclear, and the lantanides and yttrium are chemically separated. The fission products gamma activities were detected, counted and analysed in a system constituted by a high resolution Ge(Li) detector, 4096 multichannel analyser and a PDP-11 computer. Cumulative yields for fission products with half-lives between 1 to 33 hours are measured: 93 Y, 141 La, 142 La, 143 Ce and 149 Nd. The chain total yields are calculated. The cumulative fission yields measured for 93 Y, 141 La, 142 La, 143 Ce and 149 Nd are 4,49%, 4,54%, 4,95%, 4,16% and 1,37% respectively and they are in good agreement with the values found in the literature. (Author) [pt

Influence of micronutrients and their method of application on yield and yield components of sunflower

International Nuclear Information System (INIS)

Baraich, A.A.K.; Gandahi, A.W.

2016-01-01

The sunflower (Helianthus annuus L.) has been recognized as a crop with high potentials that can successfully meet future oil requirements of the country. Formulation of micronutrients (MN) based fertilizer, in terms of application rate and method, and uptake of MN by sunflower has the ability not only to ensure nutrients availability to plants particularly in MN-limiting environments but also can manipulate the environmental hazards associated with over inorganic fertilization. To support this view, clear experimental evidence is still lacking. In addition, the current experiments aimed to evaluate the influence of MN and its method of application on yield and yield components of sunflower cultivars/hybrids. Three sunflower cultivars (HO-1, Hysun-39 and Ausigold-62) along with three MN (Z, B and Fe) and two application methods (soil and foliar) were used in the experiment. Three Zn application rate (3, 5 and 8 kg ha-1) along with 0.75 kg ha-1 B and 0.30 kg Fe ha-1 were used in four combinations such as 0-0-0, 0-0.75-0.30, 0-0.75-0.30, 3-0.75-0.30, 5-0.75-0.30, 8-0.75-0.30 kg Z, B and Fe ha-1, respectively. A control (no MN) treatment was also included for comparison. Two year averaged study exhibited that foliar application of Zn, B and Fe at rate of 8-0.30-0.75 kg ha-1 increased stem girth, head diameter, number of seeds head-1, seed weight head-1, seed index, oil content and seed yield by 21%, 27%, 13%, 34%, 19%, 24 and 31%, respectively over control. Among cultivars/hybrids, the hybrids HO-1 and Hysun-39 had taller plants, seed weight head-1, seeds head-1 and earlier in flowering and maturity. Flowering and maturity was delayed in Ausi Gold-62 with higher seed index and oil content. It is concluded that foliar application of micronutrients at the rate of 8+0.75+0.30 Zn, B and Fe kg ha-1 had substantially improved yield and yield related traits of sunflower cultivars HO-1, Hysun-39 and Ausi gold-62. (author)

Effects of cutting frequency on alfalfa yield and yield components in ...

African Journals Online (AJOL)

Effects of cutting frequency on alfalfa yield and yield components in Songnen Plain, Northeast China. J Chen, F Tang, R Zhu, C Gao, G Di, Y Zhang. Abstract. The productivity and quality of alfalfa (Medicago sativa L.) is strongly influenced by cutting frequency (F). To clarify that the yield and quality of alfalfa if affected by F, ...

Fixed-bed hydrogen pyrolysis of rapeseed: product yields and compositions

International Nuclear Information System (INIS)

Onay, O.; Kockar, O.M.; Gaines, A.F.; Snape, C.E.

2006-01-01

The fixed-bed hydro pyrolysis tests have been conducted on a sample of rapeseed to investigate the effect of hydro pyrolysis on the yields and chemical structures of bio-oils, with a view to improving overall product quality. A ammonium dioxydithiomolybdenate catalyst has been used in some tests to further increase conversion. The maximum bio-oil yield of 84% was obtained in hydrogen atmosphere (with catalyst) at hydrogen pressure of 15 MPa, hydrogen flow rate of 10 dm 3 min -1 , hydro pyrolysis temperature of 520 degree C, and heating rate of 5 o Cmin -1 . Then this bio-oil was characterized by elemental analysis and some spectroscopic and chromatographic techniques. And finally, this bio-oil yield and chemical composition compared with oil obtained from fast pyrolysis condition

Evaluation of Yield and Yield Components of Oilseed Rape in the Wheat-Oilseed Rape Strip Intercropping Influenced by Chemical and Biological Fertilizers

Directory of Open Access Journals (Sweden)

R Amirmardfar

2015-01-01

Full Text Available To evaluate the effects of wheat (Triticum aestivum and oilseed rape (Brassica napus strip intercropping on yield components, seed and biological yields of oilseed rape, field experiments were carried out as factorial based on randomized complete block design with three replications at Research Farm of Tabriz University, Tabriz, Iran during 2010-2012 cropping seasons. The first factor consisted of four types of wheat and oilseed rape cropping system, sole crop of oilseed rape (A1,: strip intercropping with 8:3 (A2, 12:4 (A3 and 16:5 (A4 of wheat and oilseed rape rows, respectively and the other factor consisted of two fertilizer levels, B1: 100% chemical fertilizers (urea and triple superphosphate and B2: 50% chemical fertilizers + biofertilizers (Nitrazhin and Barvar2. The results showed that strip intercropping of wheat- oilseed rape resulted in significant increase in yield components, seed yield per occupied unit area and biological yield per occupied unit area of oilseed rape as compared with mono-cropping. The number of silique per plant in intercropping systems was significantly higher than that of mono-cropping. The highest seed yield was obtained in the 16:5 rows of wheat-oilseed rape with 343.76 g.m-2 and the lowest mean was observed in mono-cropping of oilseed rape with 260.21 g.m-2. Biological yield per occupied unit area and seed yield per intercropped unit area in B1 were significantly greater than that of B2, but this treatment had no significant effect on the other traits. Because, B1 and B2 had no significant difference in seed yield per occupied unit area and due to the importance of reduction in chemical fertilizers consumption and food and environmental health care, strip intercropping of wheat-oilseed rape under 50% chemical fertilizers + biofertilizers can be recommended as a suitable cultural method.

Evaluation of Skin Surface as an Alternative Source of Reference DNA Samples: A Pilot Study.

Science.gov (United States)

Albujja, Mohammed H; Bin Dukhyil, Abdul Aziz; Chaudhary, Abdul Rauf; Kassab, Ahmed Ch; Refaat, Ahmed M; Babu, Saranya Ramesh; Okla, Mohammad K; Kumar, Sachil

2018-01-01

An acceptable area for collecting DNA reference sample is a part of the forensic DNA analysis development. The aim of this study was to evaluate skin surface cells (SSC) as an alternate source of reference DNA sample. From each volunteer (n = 10), six samples from skin surface areas (forearm and fingertips) and two traditional samples (blood and buccal cells) were collected. Genomic DNA was extracted and quantified then genotyped using standard techniques. The highest DNA concentration of SSC samples was collected using the tape/forearm method of collection (2.1 ng/μL). Cotton swabs moistened with ethanol yielded higher quantities of DNA than swabs moistened with salicylic acid, and it gave the highest percentage of full STR profiles (97%). This study supports the use of SSC as a noninvasive sampling technique and as a extremely useful source of DNA reference samples among certain cultures where the use of buccal swabs can be considered socially unacceptable. © 2017 American Academy of Forensic Sciences.

Heterogeneous global crop yield response to biochar: a meta-regression analysis

International Nuclear Information System (INIS)

Crane-Droesch, Andrew; Torn, Margaret S; Abiven, Samuel; Jeffery, Simon

2013-01-01

Biochar may contribute to climate change mitigation at negative cost by sequestering photosynthetically fixed carbon in soil while increasing crop yields. The magnitude of biochar’s potential in this regard will depend on crop yield benefits, which have not been well-characterized across different soils and biochars. Using data from 84 studies, we employ meta-analytical, missing data, and semiparametric statistical methods to explain heterogeneity in crop yield responses across different soils, biochars, and agricultural management factors, and then estimate potential changes in yield across different soil environments globally. We find that soil cation exchange capacity and organic carbon were strong predictors of yield response, with low cation exchange and low carbon associated with positive response. We also find that yield response increases over time since initial application, compared to non-biochar controls. High reported soil clay content and low soil pH were weaker predictors of higher yield response. No biochar parameters in our dataset—biochar pH, percentage carbon content, or temperature of pyrolysis—were significant predictors of yield impacts. Projecting our fitted model onto a global soil database, we find the largest potential increases in areas with highly weathered soils, such as those characterizing much of the humid tropics. Richer soils characterizing much of the world’s important agricultural areas appear to be less likely to benefit from biochar. (letter)

Appraisal of pressmud and inorganic fertilizers on soil properties yield and sugarcane quality

International Nuclear Information System (INIS)

Sarwar, M.A.; Ibrahim, M.; Tahir, M.; Ahmad, K.; Khan, Z.I.; Valeem, E.E.

2010-01-01

A field experiment was conducted under semi-arid climatic conditions to evaluate the response of pressmud in combination with inorganic fertilizers and alone (only inorganic fertilizers) on the yield and sugarcane quality parameters besides a value-added product (locally called Gur). It is obvious from the results that inorganic fertilizer use (T2) has increased the tillers per plant, number of millable canes, stripped cane yield, sugar yield and juice present cane by 38.95 %, 38.66 %, 51.96 %, 54.92 % and 21.9 5% respectively, over the control (T1). Similarly when higher dose of pressmud was applied in integration with inorganic fertilizers (in T3), it increased total soluble solids, sucrose, purity, CSS and sugar recovery of juice by 7.83 %, 10.42 %, 2.80 %, 12.06 %, and 12.07 %, over the control (T1). The studies concluded that higher doses of mineral fertilizers increased gur % juice but it did not improve gur quality as done by higher doses of organic manures. Soil properties were also investigated before and after crop harvest. Maximum fertilizer use efficiency (124.29) was recorded in T2. (author)

Study of B{sup {+-}} {yields} K{sup {+-}}{pi}{sup 0} and B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup 0} decay modes with the BABAR detector and constraints from B {yields} {pi}{pi}, K{pi}, KK modes on the CKM matrix; Etude des desintegrations B{sup {+-}} {yields} K{sup {+-}}{pi}{sup 0} et B{sup {+-}} {yields} {pi}{sup {+-}}{pi}{sup 0} avec le detecteur BABAR et contraintes des modes B {yields} {pi}{pi}, K{pi}, KK sur la matrice CKM

Energy Technology Data Exchange (ETDEWEB)

Malcles, J

2006-04-15

The analysis of B{sup {+-}} {yields} pi{sup {+-}}{pi}{sup 0} and B{sup {+-}} {yields} K{sup {+-}}{pi}{sup 0} modes has been done with a sample of 227 millions of B pairs corresponding to 205 fb{sup -1} of data collected between october 1999 and july 2004 with the BABAR detector. The branching ratios and CP asymmetries obtained are: Br({pi}{pi}{sup 0}) = (5.57 {+-} 0.60 {+-} 0.33)*10{sup -6}; Br(K{pi}{sup 0}) (11.50 {+-} 0.65 {+-} 0.57)*10{sup -6}; A({pi}{pi}{sup 0}) = (-0.007 {+-} 0.104 {+-} 0.023); and A(K{pi}{sup 0}) = (0.066 {+-} 0.055 {+-} 0.010). The constraints on the angle alpha of the unitarity triangle have been derived from the isospin analysis of B {yields} {pi}{pi} modes. The isospin symmetry has also been used to relate B {yields} K{pi} modes in order to constraint the CKM matrix. More significant constraints have been obtained with the SU(3) symmetry for B, Bs {yields} {pi}{pi}/ K{pi}/ KK modes. They are in good agreement with the Standard CKM fit. It has been shown that such an analysis will be competitive with the Standard CKM fit in the future and will allow to determine SU(3) breaking or New Physics parameters from data. (author)

Ideotype population exploration: growth, photosynthesis, and yield components at different planting densities in winter oilseed rape (Brassica napus L.).

Science.gov (United States)

Ma, Ni; Yuan, Jinzhan; Li, Ming; Li, Jun; Zhang, Liyan; Liu, Lixin; Naeem, Muhammad Shahbaz; Zhang, Chunlei

2014-01-01

Rapeseed is one of the most important edible oil crops in the world and the seed yield has lagged behind the increasing demand driven by population growth. Winter oilseed rape (Brassica napus L.) is widely cultivated with relatively low yield in China, so it is necessary to find the strategies to improve the expression of yield potential. Planting density has great effects on seed yield of crops. Hence, field experiments were conducted in Wuhan in the Yangtze River basin with one conventional variety (Zhongshuang 11, ZS11) and one hybrid variety (Huayouza 9, HYZ9) at five planting densities (27.0×10(4), 37.5×10(4), 48.0×10(4), 58.5×10(4), 69.0×10(4) plants ha(-1)) during 2010-2012 to investigate the yield components. The physiological traits for high-yield and normal-yield populations were measured during 2011-2013. Our results indicated that planting densities of 58.5×10(4) plants ha(-1) in ZS11 and 48.0×10(4) plants ha(-1) in HYZ9 have significantly higher yield compared with the density of 27.0×10(4) plants ha(-1) for both varieties. The ideal silique numbers for ZS11 and HYZ9 were ∼0.9×10(4) (n m(-2)) and ∼1×10(4) (n m(-2)), respectively, and ideal primary branches for ZS11 and HYZ9 were ∼250 (n m(-2)) and ∼300 (n m(-2)), respectively. The highest leaf area index (LAI) and silique wall area index (SAI) was ∼5.0 and 7.0, respectively. Moreover, higher leaf net photosynthetic rate (Pn) and water use efficiency (WUE) were observed in the high-yield populations. A significantly higher level of silique wall photosynthesis and rapid dry matter accumulation were supposed to result in the maximum seed yield. Our results suggest that increasing the planting density within certain range is a feasible approach for higher seed yield in winter rapeseed in China.

YIELD AND ITS COMPONENTS IN FIELD PEA (Pisum arvense L. LINES

Directory of Open Access Journals (Sweden)

A TEKELI

2004-04-01

Full Text Available Morphological characters such as main stem length (cm, number of branches per plant, leaf length (cm, number of leaves per main stem, number of leaflets per leaf, diameter of main stem (mm, pods / main stem and seeds / pod as well as agricultural herbage yield (t ha-1, dry matter yield (t ha-1, seed yield (t ha-1, crude protein (% were investigated in Trakya, during the 1999-2002. The maximum main stem length (124.375 cm, leaf length (24.808 cm, number of pods per main stem (16.526, herbage yield (27.881 t ha-1, dry matter yield (7.319 t ha-1 and seed yield (2.590 t ha-1 were determined from the 16-K and 16-DY field pea lines. K line has given higher values than four lines for the number of branches per plant (5.567. Main stem diameter ranged from 3.077 to 4.300 mm. It’s found that the 23.025 leaves/main stem, 6.833 leaflets/leaf, 7.692 seeds/pod and 17.550% crude protein from the field pea lines.

Yield QTL analysis of Oryza sativa x O. glumaepatula introgression lines

Directory of Open Access Journals (Sweden)

Priscila Nascimento Rangel

2013-03-01

Full Text Available The objective of this work was to evaluate the yield performance of two generations (BC2F2 and BC2F9 of introgression lines developed from the interspecific cross between Oryza sativa and O. glumaepatula, and to identify the SSR markers associated to yield. The wild accession RS‑16 (O. glumaepatula was used as donor parent in the backcross with the high yielding cultivar Cica‑8 (O. sativa. A set of 114 BC2F1 introgression lines was genotyped with 141 polymorphic SSR loci distributed across the whole rice genome. Molecular analysis showed that in average 22% of the O. glumaepatula genome was introgressed into BC2F1 generation. Nine BC2F9 introgression lines had a significantly higher yield than the genitor Cica‑8, thus showing a positive genome interaction among cultivated rice and the wild O. glumaepatula. Seven QTL were identified in the overall BC2F2, with one marker interval (4879‑EST20 of great effect on yield. The alleles with positive effect on yield came from the cultivated parent Cica‑8.

Evolutionary agroecology: individual fitness and population yield in wheat (Triticum aestivum).

Science.gov (United States)

Weiner, Jacob; Du, Yan-Lei; Zhang, Cong; Qin, Xiao-Liang; Li, Feng-Min

2017-09-01

Although the importance of group selection in nature is highly controversial, several researchers have argued that plant breeding for agriculture should be based on group selection, because the goal in agriculture is to optimize population production, not individual fitness. A core hypothesis behind this claim is that crop genotypes with the highest individual fitness in a mixture of genotypes will not produce the highest population yield, because fitness is often increased by "selfish" behaviors, which reduce population performance. We tested this hypothesis by growing 35 cultivars of spring wheat (Triticum aestivum L.) in mixtures and monocultures, and analyzing the relationship between population yield in monoculture and individual yield in mixture. The relationship was unimodal, as predicted. The highest-yielding populations were from cultivars that had intermediate fitness, and these produced, on average, 35% higher yields than cultivars with the highest fitness. It is unlikely that plant breeding or genetic engineering can improve traits that natural selection has been optimizing for millions of years, but there is unutilized potential in traits that increase crop yield by decreasing individual fitness. © 2017 by the Ecological Society of America.

YIELD AND QUALITY OF YELLOW PASSION FRUITS ACCORDING TO ORGANIC FERTILIZATION AND ALTERNATIVE PHYTOSANITARY MANAGEMENT

Directory of Open Access Journals (Sweden)

Anália Lúcia Vieira Pacheco

2017-10-01

Full Text Available Growing yellow passion fruit is a profitable activity, with a high demand for labor, and it is practiced especially by family-based farmers. However, the production cost is rather high and a significant part of this cost is associated with the expenses related to fertilization and phytosanitary treatments necessary for obtaining satisfactory yields and high commercial quality fruit. Therefore, the objective of this study was to evaluate the effect of using organic compound in fertilization of plants and alternative products in phytosanitary treatments on the yield and quality of fruits. Yellow passion fruits were submitted to three types of fertilization (mineral, organic and organic-mineral and two types of phytosanitary treatment (‘conventional’ and ‘alternative’. This experiment evaluated fruit yield (kg/plant and fruit quality by using the following evaluations: seedless pulp yield, soluble solids content (SS, titratable acidity (TA, SS/TA ratio and vitamin C content. The different types of fertilization did not interfere in fruit yield, however, plants under conventional phytosanitary treatment displayed higher yields. The SS content and TA of the fruits were influenced only by fertilization, where plants that received mineral and organic-mineral fertilization produced fruit with higher contents of SS and TA. Pulp yield, SS/TA ratio and vitamin C content were not influenced by any of the evaluated factors. Regarding cultivation of passion fruit, it is possible to substitute some mineral fertilizers for organic fertilizers with no negative effects on the fruit yield or quality. However, the substitution of pesticides for alternative products compromises fruit yield.

Comparison of alkali fusion and acid digestion methods for radiochemical separation of Uranium from dietary samples

International Nuclear Information System (INIS)

Kamesh Viswanathan, B.; Arunachalam, Kantha D.; Sathesh Kumar, A.; Jayakrishana, K.; Shanmugamsundaram, H.; Rao, D.D.

2014-01-01

Several methods exist for separation and measurement of uranium in dietary samples such as neutron activation analysis (NAA), alpha spectrometric determination, inductively coupled plasma mass spectrometry (ICP-MS) and fluorimetry. For qualitative determination of activity, NAA and alpha spectrometry are said to be superior to evaluate the isotopes of uranium ( 238 U, 234 U and 235 U). In case of alpha spectrometry, the samples have to undergo radiochemical analysis for separation from other elements for uranium detection. In our studies, uranium was determined in food matrices by acid digestion (AD) and alkali fusion (AF) methods. The recovery yield of uranium in food matrices was compared in order to get consistent yield. The average activity levels of 238 U and 234 U in food samples were calculated based on recovery yield of 232 U in the samples. The average recovery of 232 U in AD method was 22 ± 8% and in AF method, it was 14.9 ± 1.3%. The spread is more in AD method than the AF method from their mean. The lowest recovery of 232 U was found in AF method. This is due to the interference of other elements in the sample during electroplating. Experimental results showed that the uranium separation by AD method has better recovery than the AF method. The consistency in recovery of 232 U was better for AF method, which was lower than the AD method. However, overall for both the methods, the recovery can be termed as poor and need rigorous follow up studies for consistently higher recoveries (>50%) in these type of biological samples. There are reports indicating satisfactory recoveries of around 80% with 232 U as tracer in the food matrices

New high yielding mutant varieties of mustard (Brassica campestris L. var. yellow sarson)

International Nuclear Information System (INIS)

Rahman, A.; Das, M.L.; Pathan, A.J.

1992-01-01

Mutation breeding work at the Bangladesh Institute of Nuclear Agriculture has been successful with the development of a number of promising mutants and with the release of two mutant varieties of mustard (Brassica campestris L. var. Yellow Sarson), Agrani and Safal, for commercial cultivation in Bangladesh. The mutant varieties have higher seed and oil yield with higher biomass production, tolerance to Alternaria blight and aphid under field conditions. The average seed yield of the varieties is 1726 and 1754 kg/ha as compared to 1447 kg/ha of the best check Sonali. These varieties have 42-43 per cent oil in the seed. (author). 7 refs., 3 tabs

Effects of Drought Stress on Canola (Brassica napus L. Genotypes Yield and Yield Components

Directory of Open Access Journals (Sweden)

R Khani

2018-02-01

in SAS ver. 9.2 and Minitab ver. 17 to test for normality. Means were separated using Fishers Least Significant Difference (LSD set at a 0.05 significance level. Results and Discussion As expected, canola genotypes showed different responses to availability of water at flowering and pod setting growth stages. Results indicated that drought stress at flowering and pod setting growth stages had severe influence on canola genotypes yield and its components. L72, L146, L183, L210 and Karaj 2 genotypes tend to produce higher yields compared to other genotypes in no-stress conditions. Hence, these genotypes are suitable for planting in irrigated lands or place that enough precipitation downfall especially in their phenological growth stages. In contrast, these genotypes are not suitable for planting in arid or semi-arid regions like Iran, because the yields reduced severely in drought stress conditions. However, KR18, HW101, SW101 and Karaj3 genotypes could not produce as same yield as L72, L146, L183, L210 and Karaj2 genotypes in no-stress condition, they had minimum yield loss in susceptible phenological growth stages especially flowering growth stage compared to other genotypes. L183 genotype could produce yield similar to tolerant genotypes, but its yield loss was high in comparison with no stress condition. Conclusions Based on our findings in this study, KR18, HW101, SW101 and Karaj3 can be considered the best among other 18 genotypes in the selection of genotypes tolerant to drought stress occurring in flowering and pod setting stages. However, this study must be repeated in other climates and different drought stress conditions to acknowledge what we achieved in this research. After that, decision can be made about planting these genotypes tolerant in arid and semi-arid regions. In this regard, we can also do more comprehensive works can be done on breeding of these genotypes, because water crisis will be the future challenge in Iran.

Evaluation of selenium in biological sample of arsenic exposed female skin lesions and skin cancer patients with related to non-exposed skin cancer patients

Energy Technology Data Exchange (ETDEWEB)

Kolachi, Nida F.; Kazi, Tasneem G., E-mail: tgkazi@yahoo.com; Wadhwa, Sham K.; Afridi, Hassan I.; Baig, Jameel A.; Khan, Sumaira; Shah, Faheem

2011-08-01

The antagonistic effects between selenium (Se) and arsenic (As) suggest that low Se status plays an important role in arsenism development. The objective of present study was to assess Se contents in biological samples of As exposed females have skin lesions and cancer with related to non-exposed skin cancer patients. The biological samples (blood and scalp hair) of As exposed group comprises, female skin cancer (ESC) patients admitted in cancer hospitals have skin lesions (ESL) and exposed referents have not both diseases (ER), belongs to As exposed area of Pakistan. For comparative purposes, age matched female skin cancerous patient (RP) and non-cancerous females (NER) belong to non-exposed areas were also selected. The As and Se in acid digests of biological samples were pre-concentrated by complexing with chelating agent (ammonium pyrrolidinedithiocarbamate), and resulted complexes were extracted into non-ionic extractant (Triton X-114), prior to analysis by electrothermal atomic absorption spectrometry. The enhancement factor of about 25 was obtained by pre-concentrating 10 mL of sample solutions. The accuracy of the optimized procedure was evaluated by using certified reference material (BCR 397) with certified values for Se and As and standard addition method at three concentration levels in real samples. No significant differences was observed (p > 0.05) when comparing the values obtained by the proposed method, added and certified values of both elements. The biological samples of ESC patients had 2-3 folds higher As and lower Se levels as compared to RP (p < 0.001). Understudied exposed referents have high level of As and lower Se contents as compared to referents subjects of non-exposed area (p < 0.01). The higher concentration of As and lower levels of Se in biological samples of cancerous patients are consisted with reported studies. - Research Highlights: {yields} Advance extraction method for the enrichment of arsenic and selenium in biological

Histograms showing variations in oil yield, water yield, and specific gravity of oil from Fischer assay analyses of oil-shale drill cores and cuttings from the Piceance Basin, northwestern Colorado

Science.gov (United States)

Dietrich, John D.; Brownfield, Michael E.; Johnson, Ronald C.; Mercier, Tracey J.

2014-01-01

Recent studies indicate that the Piceance Basin in northwestern Colorado contains over 1.5 trillion barrels of oil in place, making the basin the largest known oil-shale deposit in the world. Previously published histograms display oil-yield variations with depth and widely correlate rich and lean oil-shale beds and zones throughout the basin. Histograms in this report display oil-yield data plotted alongside either water-yield or oil specific-gravity data. Fischer assay analyses of core and cutting samples collected from exploration drill holes penetrating the Eocene Green River Formation in the Piceance Basin can aid in determining the origins of those deposits, as well as estimating the amount of organic matter, halite, nahcolite, and water-bearing minerals. This report focuses only on the oil yield plotted against water yield and oil specific gravity.

Specified assurance level sampling procedure

International Nuclear Information System (INIS)

Willner, O.

1980-11-01

In the nuclear industry design specifications for certain quality characteristics require that the final product be inspected by a sampling plan which can demonstrate product conformance to stated assurance levels. The Specified Assurance Level (SAL) Sampling Procedure has been developed to permit the direct selection of attribute sampling plans which can meet commonly used assurance levels. The SAL procedure contains sampling plans which yield the minimum sample size at stated assurance levels. The SAL procedure also provides sampling plans with acceptance numbers ranging from 0 to 10, thus, making available to the user a wide choice of plans all designed to comply with a stated assurance level

Atomic Oxygen Erosion Yield Prediction for Spacecraft Polymers in Low Earth Orbit

Science.gov (United States)

Banks, Bruce A.; Backus, Jane A.; Manno, Michael V.; Waters, Deborah L.; Cameron, Kevin C.; deGroh, Kim K.

2009-01-01

The ability to predict the atomic oxygen erosion yield of polymers based on their chemistry and physical properties has been only partially successful because of a lack of reliable low Earth orbit (LEO) erosion yield data. Unfortunately, many of the early experiments did not utilize dehydrated mass loss measurements for erosion yield determination, and the resulting mass loss due to atomic oxygen exposure may have been compromised because samples were often not in consistent states of dehydration during the pre-flight and post-flight mass measurements. This is a particular problem for short duration mission exposures or low erosion yield materials. However, as a result of the retrieval of the Polymer Erosion and Contamination Experiment (PEACE) flown as part of the Materials International Space Station Experiment 2 (MISSE 2), the erosion yields of 38 polymers and pyrolytic graphite were accurately measured. The experiment was exposed to the LEO environment for 3.95 years from August 16, 2001 to July 30, 2005 and was successfully retrieved during a space walk on July 30, 2005 during Discovery s STS-114 Return to Flight mission. The 40 different materials tested (including Kapton H fluence witness samples) were selected specifically to represent a variety of polymers used in space as well as a wide variety of polymer chemical structures. The MISSE 2 PEACE Polymers experiment used carefully dehydrated mass measurements, as well as accurate density measurements to obtain accurate erosion yield data for high-fluence (8.43 1021 atoms/sq cm). The resulting data was used to develop an erosion yield predictive tool with a correlation coefficient of 0.895 and uncertainty of +/-6.3 10(exp -25)cu cm/atom. The predictive tool utilizes the chemical structures and physical properties of polymers to predict in-space atomic oxygen erosion yields. A predictive tool concept (September 2009 version) is presented which represents an improvement over an earlier (December 2008) version.

YIELD OF Pinus taeda L. IN THINNED STAND IN THE CAMPOS DE CIMA DA SERRA REGION, RIO GRANDE DO SUL.

Directory of Open Access Journals (Sweden)

Luiz Ernesto Grillo Elesbão

2011-03-01

Full Text Available This work was carried out with the objective of studying the yield of Pinus taeda L., planted in an initial spacing of 3 x 2 m, located in Canela, Rio Grande do Sul state. The amostral population was submitted to one and two selective thinning, beyond a control sample, without thinning. The selective low thinning was conducted with reduction of the basal area to levels of 28 m2/ha. At age 17, the total yield of the control sample, without thinning, was 886.3 m3ha-1; with one thinning at age 11 the yield was 756.6 m3ha-1, resulting in losses of yield of 14.6% compared to the control; with two selective at ages 11 and 15, the yield was 732.9 m3ha-1, resulting in losses of yield in relation with the control sample, without thinning, of 17.3%. The selective thinning allowed a significant gain in diameter, up to age 17, with the execution of a selective thinning at age 11 an average diameter of 33.4 cm; with two selective thinning at ages 11 and 15 an average diameter of 33.5 cm; and an average diameter of 24.3 cm in the control sample, without thinning.

90Sr and 137Cs in environmental samples from Dolon near the Semipalatinsk Nuclear Test Site.

Science.gov (United States)

Gastberger, M; Steinhäusler, F; Gerzabek, M H; Hubmer, A; Lettner, H

2000-09-01

The (90)Sr and (137)Cs activities of soil, plant, and milk samples from the village of Dolon, located close to the Semipalatinsk Nuclear Test Site in Kazakhstan, were determined. The areal deposition at the nine sampling sites is in the range of sites both nuclides mainly have remained in the top 6 cm of the soil profiles; at others they were partly transported into deeper soil layers since the deposition. For most of the samples the (90)Sr yield after destruction of the soil matrix is significantly higher than after extracting with 6 M HCl indicating that (90)Sr is partly associated with fused silicates. The low mean (90)Sr activity concentrations of vegetation samples (14 Bq kg(-1) dw) and milk samples (0.05 Bq kg(-1) fw) suggest that this has favorable consequences in terms of limiting its bioavailability.

Study of genetic behavior of some early maturing and high yielding mutant lines of soybean in different locations

International Nuclear Information System (INIS)

Mir Ali, N.; Moualla, M.

2007-01-01

this study aimed at checking the stability of some mutant lines from soybean varieties in different locations and to select the best performing lines in each location. These lines 15 were selected according to previous experiments as being early maturing and/or that yield higher than the control. The study lasted three years, the experiment plants were grown in 3 locations: Raqa, Idleb and Lattakia. The experiment was designed as RCBD with 3 replicates for each variety. Results showed significant difference between lines, Locations and year in both earliness and yield, A significant interaction was realized between (line X location) and (line X year) for earliness and yield. For earliness (line X year) was not significant. The reverse situation was realized for yield. Location X year of yield and earliness was significant. Earliness was correlated positively with all characters (except for 100-seed-weight). Yield was positively and significantly correlated with characters of all lines. Three lines with higher yield than the control (142.61%) and same maturity time were selected. (author)

Isolation of endothelial colony-forming cells from blood samples collected from the jugular and cephalic veins of healthy adult horses.

Science.gov (United States)

Sharpe, Ashley N; Seeto, Wen J; Winter, Randolph L; Zhong, Qiao; Lipke, Elizabeth A; Wooldridge, Anne A

2016-10-01

OBJECTIVE To evaluate optimal isolation of endothelial colony-forming cells (ECFCs) from peripheral blood of horses. SAMPLE Jugular and cephalic venous blood samples from 17 adult horses. PROCEDURES Each blood sample was divided; isolation was performed with whole blood adherence (WBA) and density gradient centrifugation (DGC). Isolated cells were characterized by uptake of 1,1'-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate-labeled acetylated low-density lipoprotein (DiI-Ac-LDL), vascular tubule formation, and expression of endothelial (CD34, CD105, vascular endothelial growth factor receptor-2, and von Willebrand factor) and hematopoietic (CD14) cell markers by use of indirect immunofluorescence assay (IFA) and flow cytometry. RESULTS Colonies with cobblestone morphology were isolated from 15 of 17 horses. Blood collected from the cephalic vein yielded colonies significantly more often (14/17 horses) than did blood collected from the jugular vein (8/17 horses). Of 14 cephalic blood samples with colonies, 13 were obtained with DGC and 8 with WBA. Of 8 jugular blood samples with colonies, 8 were obtained with DGC and 4 with WBA. Colony frequency (colonies per milliliter of blood) was significantly higher for cephalic blood samples and samples isolated with DGC. Cells formed vascular tubules, had uptake of DiI-Ac-LDL, and expressed endothelial markers by use of IFA and flow cytometry, which confirmed their identity as ECFCs. CONCLUSIONS AND CLINICAL RELEVANCE Maximum yield of ECFCs was obtained for blood samples collected from both the jugular and cephalic veins and use of DGC to isolate cells. Consistent yield of ECFCs from peripheral blood of horses will enable studies to evaluate diagnostic and therapeutic uses.

A new set of parameters for 5 Gaussian fission yields systematics

International Nuclear Information System (INIS)

Katakura, Jun-ichi

2003-01-01

A new set of parameters for 5 Gaussian-type fission yields systematics has been proposed for applying to high energy neutron or proton fission and to various kinds of fissioning systems including minor actinides. The mass yields calculated using the systematics were compared with various kinds of measured data including the fission with incident energy higher than 100 MeV and the fission of minor actinide nuclides. The comparisons showed rather good agreement between the calculated values and measured ones for various kinds of fissioning systems. (author)