Urban air quality assessment using monitoring data of fractionized aerosol samples, chemometrics and meteorological conditions.

Science.gov (United States)

Yotova, Galina I; Tsitouridou, Roxani; Tsakovski, Stefan L; Simeonov, Vasil D

2016-01-01

The present article deals with assessment of urban air by using monitoring data for 10 different aerosol fractions (0.015-16 μm) collected at a typical urban site in City of Thessaloniki, Greece. The data set was subject to multivariate statistical analysis (cluster analysis and principal components analysis) and, additionally, to HYSPLIT back trajectory modeling in order to assess in a better way the impact of the weather conditions on the pollution sources identified. A specific element of the study is the effort to clarify the role of outliers in the data set. The reason for the appearance of outliers is strongly related to the atmospheric condition on the particular sampling days leading to enhanced concentration of pollutants (secondary emissions, sea sprays, road and soil dust, combustion processes) especially for ultra fine and coarse particles. It is also shown that three major sources affect the urban air quality of the location studied-sea sprays, mineral dust and anthropogenic influences (agricultural activity, combustion processes, and industrial sources). The level of impact is related to certain extent to the aerosol fraction size. The assessment of the meteorological conditions leads to defining of four downwind patterns affecting the air quality (Pelagic, Western and Central Europe, Eastern and Northeastern Europe and Africa and Southern Europe). Thus, the present study offers a complete urban air assessment taking into account the weather conditions, pollution sources and aerosol fractioning.

REMOTE SENSING IMAGE QUALITY ASSESSMENT EXPERIMENT WITH POST-PROCESSING

Directory of Open Access Journals (Sweden)

W. Jiang

2018-04-01

Full Text Available This paper briefly describes the post-processing influence assessment experiment, the experiment includes three steps: the physical simulation, image processing, and image quality assessment. The physical simulation models sampled imaging system in laboratory, the imaging system parameters are tested, the digital image serving as image processing input are produced by this imaging system with the same imaging system parameters. The gathered optical sampled images with the tested imaging parameters are processed by 3 digital image processes, including calibration pre-processing, lossy compression with different compression ratio and image post-processing with different core. Image quality assessment method used is just noticeable difference (JND subject assessment based on ISO20462, through subject assessment of the gathered and processing images, the influence of different imaging parameters and post-processing to image quality can be found. The six JND subject assessment experimental data can be validated each other. Main conclusions include: image post-processing can improve image quality; image post-processing can improve image quality even with lossy compression, image quality with higher compression ratio improves less than lower ratio; with our image post-processing method, image quality is better, when camera MTF being within a small range.

Quality evaluation of processed clay soil samples | Steiner-Asiedu ...

African Journals Online (AJOL)

Introduction: This study assessed the microbial quality of clay samples sold on two of the major Ghanaian markets. Methods: The study was a cross-sectional assessing the evaluation of processed clay and effects it has on the nutrition of the consumers in the political capital town of Ghana. The items for the examination was ...

Evaluating Quality of Aged Archival Formalin-Fixed Paraffin-Embedded Samples for RNA-Sequencing

Science.gov (United States)

Archival formalin-fixed paraffin-embedded (FFPE) samples offer a vast, untapped source of genomic data for biomarker discovery. However, the quality of FFPE samples is often highly variable, and conventional methods to assess RNA quality for RNA-sequencing (RNA-seq) are not infor...

The Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual

Energy Technology Data Exchange (ETDEWEB)

Folley, G.; Pearson, L.; Crosby, C. [Alaska Dept. of Environmental Conservation, Soldotna, AK (United States); DeCola, E.; Robertson, T. [Nuka Research and Planning Group, Seldovia, AK (United States)

2006-07-01

A comprehensive water quality sampling program was conducted in response to the oil spill that occurred when the M/V Selendang Ayu ship ran aground near a major fishing port at Unalaska Island, Alaska in December 2004. In particular, the sampling program focused on the threat of spilled oil to the local commercial fisheries resources. Spill scientists were unable to confidently model the movement of oil away from the wreck because of limited oceanographic data. In order to determine which fish species were at risk of oil contamination, a real-time assessment of how and where the oil was moving was needed, because the wreck became a continual source of oil release for several weeks after the initial grounding. The newly developed methods and procedures used to detect whole oil during the sampling program will be presented in the Alaska Commercial Fisheries Water Quality Sampling Methods and Procedures Manual which is currently under development. The purpose of the manual is to provide instructions to spill managers while they try to determine where spilled oil has or has not been encountered. The manual will include a meaningful data set that can be analyzed in real time to assess oil movement and concentration. Sections on oil properties and processes will be included along with scientific water quality sampling methods for whole and dissolved phase oil to assess potential contamination of commercial fishery resources and gear in Alaska waters during an oil spill. The manual will present a general discussion of factors that should be considered when designing a sampling program after a spill. In order to implement Alaska's improved seafood safety measures, the spatial scope of spilled oil must be known. A water quality sampling program can provide state and federal fishery managers and food safety inspectors with important information as they identify at-risk fisheries. 11 refs., 7 figs.

Assessment of Quality of Assay Data on Drill Samples from Golden ...

African Journals Online (AJOL)

The success of a mining company is dependent on the integrity of the resource database. The quality of assay data and thus the validity of the database can only be guaranteed when appropriate sampling and assaying protocols have been implemented. It is necessary to convince investors and project financiers that ...

Groundwater Quality Assessment Based on Improved Water Quality Index in Pengyang County, Ningxia, Northwest China

Directory of Open Access Journals (Sweden)

Li Pei-Yue

2010-01-01

Full Text Available The aim of this work is to assess the groundwater quality in Pengyang County based on an improved water quality index. An information entropy method was introduced to assign weight to each parameter. For calculating WQI and assess the groundwater quality, total 74 groundwater samples were collected and all these samples subjected to comprehensive physicochemical analysis. Each of the groundwater samples was analyzed for 26 parameters and for computing WQI 14 parameters were chosen including chloride, sulphate, pH, chemical oxygen demand (COD, total dissolved solid (TDS, total hardness (TH, nitrate, ammonia nitrogen, fluoride, total iron (Tfe, arsenic, iodine, aluminum, nitrite, metasilicic acid and free carbon dioxide. At last a zoning map of different water quality was drawn. Information entropy weight makes WQI perfect and makes the assessment results more reasonable. The WQI for 74 samples ranges from 12.40 to 205.24 and over 90% of the samples are below 100. The excellent quality water area covers nearly 90% of the whole region. The high value of WQI has been found to be closely related with the high values of TDS, fluoride, sulphate, nitrite and TH. In the medium quality water area and poor quality water area, groundwater needs some degree of pretreated before consumption. From the groundwater conservation view of point, the groundwater still need protection and long term monitoring in case of future rapid industrial development. At the same time, preventive actions on the agricultural non point pollution sources in the plain area are also need to be in consideration.

Drinking water quality assessment.

Science.gov (United States)

Aryal, J; Gautam, B; Sapkota, N

2012-09-01

Drinking water quality is the great public health concern because it is a major risk factor for high incidence of diarrheal diseases in Nepal. In the recent years, the prevalence rate of diarrhoea has been found the highest in Myagdi district. This study was carried out to assess the quality of drinking water from different natural sources, reservoirs and collection taps at Arthunge VDC of Myagdi district. A cross-sectional study was carried out using random sampling method in Arthunge VDC of Myagdi district from January to June,2010. 84 water samples representing natural sources, reservoirs and collection taps from the study area were collected. The physico-chemical and microbiological analysis was performed following standards technique set by APHA 1998 and statistical analysis was carried out using SPSS 11.5. The result was also compared with national and WHO guidelines. Out of 84 water samples (from natural source, reservoirs and tap water) analyzed, drinking water quality parameters (except arsenic and total coliform) of all water samples was found to be within the WHO standards and national standards.15.48% of water samples showed pH (13) higher than the WHO permissible guideline values. Similarly, 85.71% of water samples showed higher Arsenic value (72) than WHO value. Further, the statistical analysis showed no significant difference (Pwater for collection taps water samples of winter (January, 2010) and summer (June, 2010). The microbiological examination of water samples revealed the presence of total coliform in 86.90% of water samples. The results obtained from physico-chemical analysis of water samples were within national standard and WHO standards except arsenic. The study also found the coliform contamination to be the key problem with drinking water.

Optimizing Scoring and Sampling Methods for Assessing Built Neighborhood Environment Quality in Residential Areas

Science.gov (United States)

Adu-Brimpong, Joel; Coffey, Nathan; Ayers, Colby; Berrigan, David; Yingling, Leah R.; Thomas, Samantha; Mitchell, Valerie; Ahuja, Chaarushi; Rivers, Joshua; Hartz, Jacob; Powell-Wiley, Tiffany M.

2017-01-01

Optimization of existing measurement tools is necessary to explore links between aspects of the neighborhood built environment and health behaviors or outcomes. We evaluate a scoring method for virtual neighborhood audits utilizing the Active Neighborhood Checklist (the Checklist), a neighborhood audit measure, and assess street segment representativeness in low-income neighborhoods. Eighty-two home neighborhoods of Washington, D.C. Cardiovascular Health/Needs Assessment (NCT01927783) participants were audited using Google Street View imagery and the Checklist (five sections with 89 total questions). Twelve street segments per home address were assessed for (1) Land-Use Type; (2) Public Transportation Availability; (3) Street Characteristics; (4) Environment Quality and (5) Sidewalks/Walking/Biking features. Checklist items were scored 0–2 points/question. A combinations algorithm was developed to assess street segments’ representativeness. Spearman correlations were calculated between built environment quality scores and Walk Score®, a validated neighborhood walkability measure. Street segment quality scores ranged 10–47 (Mean = 29.4 ± 6.9) and overall neighborhood quality scores, 172–475 (Mean = 352.3 ± 63.6). Walk scores® ranged 0–91 (Mean = 46.7 ± 26.3). Street segment combinations’ correlation coefficients ranged 0.75–1.0. Significant positive correlations were found between overall neighborhood quality scores, four of the five Checklist subsection scores, and Walk Scores® (r = 0.62, p health behaviors and outcomes. PMID:28282878

Microbial quality of some commercial yoghurt samples in Awka ...

African Journals Online (AJOL)

Microbiological quality of ten commercial samples representing ten different brands of yoghurt marketed in Awka metropolis, Anambra State was assessed using standard microbiological procedures. The analysis carried out was aimed at determining the presence and level of both bacterial and fungal contaminants in the ...

Quality evaluation of processed clay soil samples.

Science.gov (United States)

Steiner-Asiedu, Matilda; Harrison, Obed Akwaa; Vuvor, Frederick; Tano-Debrah, Kwaku

2016-01-01

This study assessed the microbial quality of clay samples sold on two of the major Ghanaian markets. The study was a cross-sectional assessing the evaluation of processed clay and effects it has on the nutrition of the consumers in the political capital town of Ghana. The items for the examination was processed clay soil samples. Staphylococcus spp and fecal coliforms including Klebsiella, Escherichia, and Shigella and Enterobacterspp were isolated from the clay samples. Samples from the Kaneshie market in Accra recorded the highest total viable counts 6.5 Log cfu/g and Staphylococcal count 5.8 Log cfu/g. For fecal coliforms, Madina market samples had the highest count 6.5 Log cfu/g and also recorded the highest levels of yeast and mould. For Koforidua, total viable count was highest in the samples from the Zongo market 6.3 Log cfu/g. Central market samples had the highest count of fecal coliforms 4.6 Log cfu/g and yeasts and moulds 6.5 Log cfu/g. "Small" market recorded the highest staphylococcal count 6.2 Log cfu/g. The water activity of the clay samples were low, and ranged between 0.65±0.01 and 0.66±0.00 for samples collected from Koforidua and Accra respectively. The clay samples were found to contain Klebsiella spp. Escherichia, Enterobacter, Shigella spp. staphylococcus spp., yeast and mould. These have health implications when consumed.

Assessment of Groundwater Quality of Ilorin Metropolis using Water Quality Index Approach

Directory of Open Access Journals (Sweden)

J. A. Olatunji

2015-06-01

Full Text Available Groundwater as a source of potable water is becoming more important in Nigeria. Therefore, the need to ascertain the continuing potability of the sources cannot be over emphasised. This study is aimed at assessing the quality of selected groundwater samples from Ilorin metropolis, Nigeria, using the water quality index (WQI method. Twenty two water samples were collected, 10 samples from boreholes and 12 samples from hand dug wells. All these were analysed for their physico – chemical properties. The parameters used for calculating the water quality index include the following: pH, total hardness, total dissolved solid, calcium, fluoride, iron, potassium, sulphate, nitrate and carbonate. The water quality index for the twenty two samples ranged from 0.66 to 756.02 with an average of 80.77. Two of the samples exceeded 100, which is the upper limit for safe drinking water. The high values of WQI from the sampling locations are observed to be due to higher values of iron and fluoride. This study reveals that the investigated groundwaters are mostly potable and can be consumed without treatment. Nonetheless, the sources identified to be unsafe should be treated before consumption.

Drinking Water Quality Assessment in Tetova Region

OpenAIRE

B. H. Durmishi; M. Ismaili; A. Shabani; Sh. Abduli

2012-01-01

Problem statement: The quality of drinking water is a crucial factor for human health. The objective of this study was the assessment of physical, chemical and bacteriological quality of the drinking water in the city of Tetova and several surrounding villages in the Republic of Macedonia for the period May 2007-2008. The sampling and analysis are conducted in accordance with State Regulation No. 57/2004, which is in compliance with EU and WHO standards. A total of 415 samples were taken for ...

Optimizing Scoring and Sampling Methods for Assessing Built Neighborhood Environment Quality in Residential Areas

Directory of Open Access Journals (Sweden)

Joel Adu-Brimpong

2017-03-01

Full Text Available Optimization of existing measurement tools is necessary to explore links between aspects of the neighborhood built environment and health behaviors or outcomes. We evaluate a scoring method for virtual neighborhood audits utilizing the Active Neighborhood Checklist (the Checklist, a neighborhood audit measure, and assess street segment representativeness in low-income neighborhoods. Eighty-two home neighborhoods of Washington, D.C. Cardiovascular Health/Needs Assessment (NCT01927783 participants were audited using Google Street View imagery and the Checklist (five sections with 89 total questions. Twelve street segments per home address were assessed for (1 Land-Use Type; (2 Public Transportation Availability; (3 Street Characteristics; (4 Environment Quality and (5 Sidewalks/Walking/Biking features. Checklist items were scored 0–2 points/question. A combinations algorithm was developed to assess street segments’ representativeness. Spearman correlations were calculated between built environment quality scores and Walk Score®, a validated neighborhood walkability measure. Street segment quality scores ranged 10–47 (Mean = 29.4 ± 6.9 and overall neighborhood quality scores, 172–475 (Mean = 352.3 ± 63.6. Walk scores® ranged 0–91 (Mean = 46.7 ± 26.3. Street segment combinations’ correlation coefficients ranged 0.75–1.0. Significant positive correlations were found between overall neighborhood quality scores, four of the five Checklist subsection scores, and Walk Scores® (r = 0.62, p < 0.001. This scoring method adequately captures neighborhood features in low-income, residential areas and may aid in delineating impact of specific built environment features on health behaviors and outcomes.

Learning Receptive Fields and Quality Lookups for Blind Quality Assessment of Stereoscopic Images.

Science.gov (United States)

Shao, Feng; Lin, Weisi; Wang, Shanshan; Jiang, Gangyi; Yu, Mei; Dai, Qionghai

2016-03-01

Blind quality assessment of 3D images encounters more new challenges than its 2D counterparts. In this paper, we propose a blind quality assessment for stereoscopic images by learning the characteristics of receptive fields (RFs) from perspective of dictionary learning, and constructing quality lookups to replace human opinion scores without performance loss. The important feature of the proposed method is that we do not need a large set of samples of distorted stereoscopic images and the corresponding human opinion scores to learn a regression model. To be more specific, in the training phase, we learn local RFs (LRFs) and global RFs (GRFs) from the reference and distorted stereoscopic images, respectively, and construct their corresponding local quality lookups (LQLs) and global quality lookups (GQLs). In the testing phase, blind quality pooling can be easily achieved by searching optimal GRF and LRF indexes from the learnt LQLs and GQLs, and the quality score is obtained by combining the LRF and GRF indexes together. Experimental results on three publicly 3D image quality assessment databases demonstrate that in comparison with the existing methods, the devised algorithm achieves high consistent alignment with subjective assessment.

Evaluation of groundwater quality and assessment of scaling potential and corrosiveness of water samples in Kadkan aquifer, Khorasan-e-Razavi Province, Iran.

Science.gov (United States)

Esmaeili-Vardanjani, Mostafa; Rasa, Iraj; Amiri, Vahab; Yazdi, Mohammad; Pazand, Kaveh

2015-02-01

The chemical analysis of 129 groundwater samples in the Kadkan area, Khorasan-e-Razavi Province, NE of Iran was evaluated to determine the hydrochemical processes, assessment of groundwater quality for irrigation purposes, corrosiveness, and scaling potential of the groundwater. Accordingly, the suitability of groundwater for irrigation was evaluated based on the sodium adsorption ratio, residual sodium carbonate, sodium percent, salinity hazard, and US Salinity Laboratory hazard diagram. Based on the electrical conductivity and sodium adsorption ratio, the dominant classes are C3-S1, C3-S2, C2-S1, and C4-S2. According to the Wilcox plot, about 50 % of the samples fall in the "Excellent to Good" and "Good to Permissible" classes. Besides, the Langelier saturation index, Ryznar stability index (RSI), Larson-Skold index, and Puckorius scaling index were evaluated for assessing the corrosiveness and scaling potential of the groundwater. Corrosiveness and scaling indices stated that the majority of samples are classified into "Aggressive" and "Very Aggressive" category. In addition, chloride and sulfate interfere in 90 % of the samples. Assessment of hydrochemical characteristics indicates Na-Mg-Cl as the predominant hydrochemical type. Spatial distribution of hydrochemical parameters indicates that hydrochemical processes are influenced by geology and hydrogeology of Kadkan aquifer. The Gibbs plots gave an indication that groundwater chemistry in this area may have acquired the chemistry mainly from evaporation and mineral precipitation. Grouping the samples based on Q-mode hierarchical cluster analysis helped to more separation of similar samples. The R-mode HCA grouped analyzed parameters into two groups based on similarity of hydrochemical characteristics. As a result, the samples collected in northern and southern parts of the study area show the best quality (i.e., lowest salinity) for some purposes such as irrigation and drinking.

Cluster designs to assess the prevalence of acute malnutrition by lot quality assurance sampling: a validation study by computer simulation.

Science.gov (United States)

Olives, Casey; Pagano, Marcello; Deitchler, Megan; Hedt, Bethany L; Egge, Kari; Valadez, Joseph J

2009-04-01

Traditional lot quality assurance sampling (LQAS) methods require simple random sampling to guarantee valid results. However, cluster sampling has been proposed to reduce the number of random starting points. This study uses simulations to examine the classification error of two such designs, a 67x3 (67 clusters of three observations) and a 33x6 (33 clusters of six observations) sampling scheme to assess the prevalence of global acute malnutrition (GAM). Further, we explore the use of a 67x3 sequential sampling scheme for LQAS classification of GAM prevalence. Results indicate that, for independent clusters with moderate intracluster correlation for the GAM outcome, the three sampling designs maintain approximate validity for LQAS analysis. Sequential sampling can substantially reduce the average sample size that is required for data collection. The presence of intercluster correlation can impact dramatically the classification error that is associated with LQAS analysis.

Groundwater-quality data from the National Water-Quality Assessment Project, January through December 2014 and select quality-control data from May 2012 through December 2014

Science.gov (United States)

Arnold, Terri L.; Bexfield, Laura M.; Musgrove, MaryLynn; Lindsey, Bruce D.; Stackelberg, Paul E.; Barlow, Jeannie R.; Desimone, Leslie A.; Kulongoski, Justin T.; Kingsbury, James A.; Ayotte, Joseph D.; Fleming, Brandon J.; Belitz, Kenneth

2017-10-05

Groundwater-quality data were collected from 559 wells as part of the National Water-Quality Assessment Project of the U.S. Geological Survey National Water-Quality Program from January through December 2014. The data were collected from four types of well networks: principal aquifer study networks, which are used to assess the quality of groundwater used for public water supply; land-use study networks, which are used to assess land-use effects on shallow groundwater quality; major aquifer study networks, which are used to assess the quality of groundwater used for domestic supply; and enhanced trends networks, which are used to evaluate the time scales during which groundwater quality changes. Groundwater samples were analyzed for a large number of water-quality indicators and constituents, including major ions, nutrients, trace elements, volatile organic compounds, pesticides, radionuclides, and some constituents of special interest (arsenic speciation, chromium [VI] and perchlorate). These groundwater-quality data, along with data from quality-control samples, are tabulated in this report and in an associated data release.

Quality assessment of pharmaceutical tablet samples using Fourier transform near infrared spectroscopy and multivariate analysis

Science.gov (United States)

Kandpal, Lalit Mohan; Tewari, Jagdish; Gopinathan, Nishanth; Stolee, Jessica; Strong, Rick; Boulas, Pierre; Cho, Byoung-Kwan

2017-09-01

Determination of the content uniformity, assessed by the amount of an active pharmaceutical ingredient (API), and hardness of pharmaceutical materials is important for achieving a high-quality formulation and to ensure the intended therapeutic effects of the end-product. In this work, Fourier transform near infrared (FT-NIR) spectroscopy was used to determine the content uniformity and hardness of a pharmaceutical mini-tablet and standard tablet samples. Tablet samples were scanned using an FT-NIR instrument and tablet spectra were collected at wavelengths of 1000-2500 nm. Furthermore, multivariate analysis was applied to extract the relationship between the FT-NIR spectra and the measured parameters. The results of FT-NIR spectroscopy for API and hardness prediction were as precise as the reference high-performance liquid chromatography and mechanical hardness tests. For the prediction of mini-tablet API content, the highest coefficient of determination for the prediction (R2p) was found to be 0.99 with a standard error of prediction (SEP) of 0.72 mg. Moreover, the standard tablet hardness measurement had a R2p value of 0.91 with an SEP of 0.25 kg. These results suggest that FT-NIR spectroscopy is an alternative and accurate nondestructive measurement tool for the detection of the chemical and physical properties of pharmaceutical samples.

Independent assessment of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) sample preparation quality: A novel statistical approach for quality scoring.

Science.gov (United States)

Kooijman, Pieter C; Kok, Sander J; Weusten, Jos J A M; Honing, Maarten

2016-05-05

Preparation of samples according to an optimized method is crucial for accurate determination of polymer sample characteristics by Matrix-Assisted Laser Desorption Ionization (MALDI) analysis. Sample preparation conditions such as matrix choice, cationization agent, deposition technique or even the deposition volume should be chosen to suit the sample of interest. Many sample preparation protocols have been developed and employed, yet finding the optimal sample preparation protocol remains a challenge. Because an objective comparison between the results of diverse protocols is not possible, "gut-feeling" or "good enough" is often decisive in the search for an optimum. This implies that sub-optimal protocols are used, leading to a loss of mass spectral information quality. To address this problem a novel analytical strategy based on MALDI imaging and statistical data processing was developed in which eight parameters were formulated to objectively quantify the quality of sample deposition and optimal MALDI matrix composition and finally sum up to an overall quality score of the sample deposition. These parameters can be established in a fully automated way using commercially available mass spectrometry imaging instruments without any hardware adjustments. With the newly developed analytical strategy the highest quality MALDI spots were selected, resulting in more reproducible and more valuable spectra for PEG in a variety of matrices. Moreover, our method enables an objective comparison of sample preparation protocols for any analyte and opens up new fields of investigation by presenting MALDI performance data in a clear and concise way. Copyright © 2016 Elsevier B.V. All rights reserved.

External quality assessment for KRAS testing is needed: setup of a European program and report of the first joined regional quality assessment rounds

DEFF Research Database (Denmark)

Bellon, Ellen; Ligtenberg, Marjolijn J L; Tejpar, Sabine

2011-01-01

. In an effort to ensure optimal, uniform, and reliable community-based KRAS testing throughout Europe, a KRAS external quality assessment (EQA) scheme was set up. The first large assessment round included 59 laboratories from eight different European countries. For each country, one regional scheme organizer...... expand this program to more laboratories to provide a robust estimate of the quality of KRAS testing in Europe, and provide the basis for remedial measures and harmonization....... prepared and distributed the samples for the participants of their own country. The samples included unstained sections of 10 invasive colorectal carcinomas with known KRAS mutation status. The samples were centrally validated by one of two reference laboratories. The laboratories were allowed to use...

Quality-control design for surface-water sampling in the National Water-Quality Network

Science.gov (United States)

Riskin, Melissa L.; Reutter, David C.; Martin, Jeffrey D.; Mueller, David K.

2018-04-10

The data-quality objectives for samples collected at surface-water sites in the National Water-Quality Network include estimating the extent to which contamination, matrix effects, and measurement variability affect interpretation of environmental conditions. Quality-control samples provide insight into how well the samples collected at surface-water sites represent the true environmental conditions. Quality-control samples used in this program include field blanks, replicates, and field matrix spikes. This report describes the design for collection of these quality-control samples and the data management needed to properly identify these samples in the U.S. Geological Survey’s national database.

Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach

NARCIS (Netherlands)

van Leth, Frank; den Heijer, Casper; Beerepoot, Marielle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

2017-01-01

Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates

Sequential sampling: a novel method in farm animal welfare assessment.

Science.gov (United States)

Heath, C A E; Main, D C J; Mullan, S; Haskell, M J; Browne, W J

2016-02-01

Lameness in dairy cows is an important welfare issue. As part of a welfare assessment, herd level lameness prevalence can be estimated from scoring a sample of animals, where higher levels of accuracy are associated with larger sample sizes. As the financial cost is related to the number of cows sampled, smaller samples are preferred. Sequential sampling schemes have been used for informing decision making in clinical trials. Sequential sampling involves taking samples in stages, where sampling can stop early depending on the estimated lameness prevalence. When welfare assessment is used for a pass/fail decision, a similar approach could be applied to reduce the overall sample size. The sampling schemes proposed here apply the principles of sequential sampling within a diagnostic testing framework. This study develops three sequential sampling schemes of increasing complexity to classify 80 fully assessed UK dairy farms, each with known lameness prevalence. Using the Welfare Quality herd-size-based sampling scheme, the first 'basic' scheme involves two sampling events. At the first sampling event half the Welfare Quality sample size is drawn, and then depending on the outcome, sampling either stops or is continued and the same number of animals is sampled again. In the second 'cautious' scheme, an adaptation is made to ensure that correctly classifying a farm as 'bad' is done with greater certainty. The third scheme is the only scheme to go beyond lameness as a binary measure and investigates the potential for increasing accuracy by incorporating the number of severely lame cows into the decision. The three schemes are evaluated with respect to accuracy and average sample size by running 100 000 simulations for each scheme, and a comparison is made with the fixed size Welfare Quality herd-size-based sampling scheme. All three schemes performed almost as well as the fixed size scheme but with much smaller average sample sizes. For the third scheme, an overall

The quality assessment to drinking water supplied to Islamabad

International Nuclear Information System (INIS)

Mohammad, D.; Hussain, F.; Ashraf, H.; Hussain, S.; Rana, N.N.; Anwar, K.; Sami, Z.; Dil, S.

1997-01-01

Drinking water supply system of Islamabad draws major quantities of water from sources such as Simli dam, Rawal dam and the underground aquifer through an integrated system of tube wells sunk in different parts of the city. For an extensive assessment of drinking water quality samples were collected at source from 80 CDA tube wells. Samples were also collected from 3 to 5 predetermined consumer points in sectors 1-8, 1-9, 1-10, G-9, G-10, F-9 and F-10. All these samples apart form coliform organisms, cationic and anionic species present, were analyzed for different parameters required to delineate the drinking water quality using the most reliable techniques like ICP-AES, AAS, HPLC, TIMS and Electro-chemistry. The tube well water samples, generally, contained higher amounts of the TDS and hence higher Ca++ and Mg++ concentration as compared with those of dam water samples. Further all these samples contained reasonable concentration of Sr, an element usually associated with calcite deposits. Samples were also checked for the total radioactivity and were found to be free of such contamination. The results have been discussed with a view to assess the quality of drinking water during the stipulated period. (author)

Environmetric data interpretation to assess surface water quality

International Nuclear Information System (INIS)

Simeonova, P.; Papazova, P.; Lovchinov, V.

2013-01-01

Two multivariate statistical methods (Cluster analysis /CA/ and Principal components analysis /PCA/) were applied for model assessment of the water quality of Maritsa River and Tundja River on Bulgarian territory. The study used long-term monitoring data from many sampling sites characterized by various surface water quality indicators. The application of CA to the indicators results in formation of clusters showing the impact of biological, anthropogenic and eutrophication sources. For further assessment of the monitoring data, PCA was implemented, which identified, again, latent factors confirming, in principle, the clustering output. Their identification coincide correctly to the location of real pollution sources along the rivers catchments. The linkage of the sampling sites along the river flow by CA identified several special patterns separated by specific tracers levels. The apportionment models of the pollution determined the contribution of each one of identified pollution factors to the total concentration of each one of the water quality parameters. Thus, a better risk management of the surface water quality is achieved both on local and national level

Hanford Sampling Quality Management Plan (HSQMP)

International Nuclear Information System (INIS)

Hyatt, J.E.

1995-06-01

HSQMP establishes quality requirements in response to DOE Order 5700. 6C and to 10 Code of Federal Regulations 830.120. HSQMP is designed to meet the needs of Richland Operations Office for controlling the quality of services provided by sampling operations. It is issued through the Analytical Services Program of the Waste Programs Division. This document describes the Environmental Sampling and Analysis Program activities considered to represent the best management activities necessary to achieve a sampling program with adequate control

Assessment of groundwater quality and evaluation of scaling and corrosiveness potential of drinking water samples in villages of Chabahr city, Sistan and Baluchistan province in Iran.

Science.gov (United States)

Abbasnia, Abbas; Alimohammadi, Mahmood; Mahvi, Amir Hossein; Nabizadeh, Ramin; Yousefi, Mahmood; Mohammadi, Ali Akbar; Pasalari, Hassan; Mirzabeigi, Majid

2018-02-01

The aims of this study were to assess and analysis of drinking water quality of Chabahar villages in Sistan and Baluchistan province by water quality index (WQI) and to investigate the water stability in subjected area. The results illustrated that the average values of LSI, RSI, PSI, LS, and AI was 0.5 (±0.34), 6.76 (±0.6), 6.50 (±0.99), 2.71 (±1.59), and 12.63 (±0.34), respectively. The calculation of WQI for groundwater samples indicated that 25% of the samples could be considered as excellent water, 50% of the samples were classified as good water category and 25% of the samples showed poor water category.

An assessment of groundwater quality using water quality index in Chennai, Tamil Nadu, India

Directory of Open Access Journals (Sweden)

I Nanda Balan

2012-01-01

Full Text Available Context : Water, the elixir of life, is a prime natural resource. Due to rapid urbanization in India, the availability and quality of groundwater have been affected. According to the Central Groundwater Board, 80% of Chennai′s groundwater has been depleted and any further exploration could lead to salt water ingression. Hence, this study was done to assess the groundwater quality in Chennai city. Aim : To assess the groundwater quality using water quality index in Chennai city. Materials and Methods: Chennai city was divided into three zones based on the legislative constituency and from these three zones three locations were randomly selected and nine groundwater samples were collected and analyzed for physiochemical properties. Results: With the exception of few parameters, most of the water quality assessment parameters showed parameters within the accepted standard values of Bureau of Indian Standards (BIS. Except for pH in a single location of zone 1, none of the parameters exceeded the permissible values for water quality assessment as prescribed by the BIS. Conclusion: This study demonstrated that in general the groundwater quality status of Chennai city ranged from excellent to good and the groundwater is fit for human consumption based on all the nine parameters of water quality index and fluoride content.

Clustered lot quality assurance sampling to assess immunisation coverage: increasing rapidity and maintaining precision.

Science.gov (United States)

Pezzoli, Lorenzo; Andrews, Nick; Ronveaux, Olivier

2010-05-01

Vaccination programmes targeting disease elimination aim to achieve very high coverage levels (e.g. 95%). We calculated the precision of different clustered lot quality assurance sampling (LQAS) designs in computer-simulated surveys to provide local health officers in the field with preset LQAS plans to simply and rapidly assess programmes with high coverage targets. We calculated sample size (N), decision value (d) and misclassification errors (alpha and beta) of several LQAS plans by running 10 000 simulations. We kept the upper coverage threshold (UT) at 90% or 95% and decreased the lower threshold (LT) progressively by 5%. We measured the proportion of simulations with d unvaccinated individuals if the coverage was LT% (pLT) to calculate alpha (1-pLT). We divided N in clusters (between 5 and 10) and recalculated the errors hypothesising that the coverage would vary in the clusters according to a binomial distribution with preset standard deviations of 0.05 and 0.1 from the mean lot coverage. We selected the plans fulfilling these criteria: alpha LQAS plans dividing the lot in five clusters with N = 50 (5 x 10) and d = 4 to evaluate programmes with 95% coverage target and d = 7 to evaluate programmes with 90% target. These plans will considerably increase the feasibility and the rapidity of conducting the LQAS in the field.

Using lot quality assurance sampling to assess measurements for growth monitoring in a developing country's primary health care system.

Science.gov (United States)

Valadez, J J; Brown, L D; Vargas, W V; Morley, D

1996-04-01

Local supervisors used lot quality assurance sampling (LQAS) during routine household visits to assess the technical quality of Costa Rican community-based health workers (CHW): measuring and recording weights of children, interpreting their growth trend and providing nutrition education to mothers. Supervisors sampled 10 households in each of 12 Health Areas (4-8 hours per area). No more than two performance errors were allowed for each CHW. This LQAS decision rule resulted in judgments with a sensitivity and specificity of about 95 percent. Three categories of results are reported: (1) CHW adequately weighed children, calculated ages, identified children requiring nutritional services, and used the growth chart. (2) They needed to improve referral, education, and documentation skills. (3) The lack of system support to regularly provide growth cards, supplementary feeding to identified malnourished children, and other essential materials may have discouraged some CHW resulting in them not applying their skills. Supervisors regularly using LQAS should, by the sixth round of supervision, identify at least 90 percent of inadequately performing CHW. This paper demonstrates the strength of LQAS, namely, to be used easily by low level local health workers to identify poorly functioning components of growth monitoring and promotion.

Evaluation of primary immunization coverage of infants under universal immunization programme in an urban area of bangalore city using cluster sampling and lot quality assurance sampling techniques.

Science.gov (United States)

K, Punith; K, Lalitha; G, Suman; Bs, Pradeep; Kumar K, Jayanth

2008-07-01

Is LQAS technique better than cluster sampling technique in terms of resources to evaluate the immunization coverage in an urban area? To assess and compare the lot quality assurance sampling against cluster sampling in the evaluation of primary immunization coverage. Population-based cross-sectional study. Areas under Mathikere Urban Health Center. Children aged 12 months to 23 months. 220 in cluster sampling, 76 in lot quality assurance sampling. Percentages and Proportions, Chi square Test. (1) Using cluster sampling, the percentage of completely immunized, partially immunized and unimmunized children were 84.09%, 14.09% and 1.82%, respectively. With lot quality assurance sampling, it was 92.11%, 6.58% and 1.31%, respectively. (2) Immunization coverage levels as evaluated by cluster sampling technique were not statistically different from the coverage value as obtained by lot quality assurance sampling techniques. Considering the time and resources required, it was found that lot quality assurance sampling is a better technique in evaluating the primary immunization coverage in urban area.

An assessment of drinking-water quality post-Haiyan.

Science.gov (United States)

Magtibay, Bonifacio; Anarna, Maria Sonabel; Fernando, Arturo

2015-01-01

Access to safe drinking-water is one of the most important public health concerns in an emergency setting. This descriptive study reports on an assessment of water quality in drinking-water supply systems in areas affected by Typhoon Haiyan immediately following and 10 months after the typhoon. Water quality testing and risk assessments of the drinking-water systems were conducted three weeks and 10 months post-Haiyan. Portable test kits were used to determine the presence of Escherichia coli and the level of residual chlorine in water samples. The level of risk was fed back to the water operators for their action. Of the 121 water samples collected three weeks post-Haiyan, 44% were contaminated, while 65% (244/373) of samples were found positive for E. coli 10 months post-Haiyan. For the three components of drinking-water systems - source, storage and distribution - the proportions of contaminated systems were 70%, 67% and 57%, respectively, 10 months after Haiyan. Vulnerability to faecal contamination was attributed to weak water safety programmes in the drinking-water supply systems. Poor water quality can be prevented or reduced by developing and implementing a water safety plan for the systems. This, in turn, will help prevent waterborne disease outbreaks caused by contaminated water post-disaster.

A Preliminary Assessment of Groundwater Samples around a Filling ...

African Journals Online (AJOL)

This paper is a preliminary assessment of groundwater samples around a filling station in Diobu area of Port Harcourt for four years at intervals of two years with a view to determine the level of groundwater pollution. It examines the physiochemical, major ions and heavy metal aspect of groundwater quality around the study ...

Power quality assessment

International Nuclear Information System (INIS)

Fathi, H.M.E.

2012-01-01

The electrical power systems are exposed to different types of power quality disturbances problems. Assessment of power quality is necessary for maintaining accurate operation of sensitive equipment's especially for nuclear installations, it also ensures that unnecessary energy losses in a power system are kept at a minimum which lead to more profits. With advanced in technology growing of industrial / commercial facilities in many region. Power quality problems have been a major concern among engineers; particularly in an industrial environment, where there are many large-scale type of equipment. Thus, it would be useful to investigate and mitigate the power quality problems. Assessment of Power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. The choice of monitoring equipment in a survey is also important to ascertain a solution to these power quality problems. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards); then, if problems exist, recommendation of mitigation techniques must be considered. The main objective of the present work is to investigate and mitigate of power quality problems in nuclear installations. Normally electrical power is supplied to the installations via two sources to keep good reliability. Each source is designed to carry the full load. The Assessment of power quality was performed at the nuclear installations for both sources at different operation conditions. The thesis begins with a discussion of power quality definitions and the results of previous studies in power quality monitoring. The assessment determines that one source of electricity was deemed to have relatively good power quality; there were several disturbances, which exceeded the thresholds. Among of them are fifth harmonic, voltage swell, overvoltage and flicker. While the second

Higher quality of molecular testing, an unfulfilled priority: Results from external quality assessment for KRAS mutation testing in colorectal cancer.

Science.gov (United States)

Tembuyser, Lien; Ligtenberg, Marjolijn J L; Normanno, Nicola; Delen, Sofie; van Krieken, J Han; Dequeker, Elisabeth M C

2014-05-01

Precision medicine is now a key element in clinical oncology. RAS mutational status is a crucial predictor of responsiveness to anti-epidermal growth factor receptor agents in metastatic colorectal cancer. In an effort to guarantee high-quality testing services in molecular pathology, the European Society of Pathology has been organizing an annual KRAS external quality assessment program since 2009. In 2012, 10 formalin-fixed, paraffin-embedded samples, of which 8 from invasive metastatic colorectal cancer tissue and 2 artificial samples of cell line material, were sent to more than 100 laboratories from 26 countries with a request for routine KRAS testing. Both genotyping and clinical reports were assessed independently. Twenty-seven percent of the participants genotyped at least 1 of 10 samples incorrectly. In total, less than 5% of the distributed specimens were genotyped incorrectly. Genotyping errors consisted of false negatives, false positives, and incorrectly genotyped mutations. Twenty percent of the laboratories reported a technical error for one or more samples. A review of the written reports showed that several essential elements were missing, most notably a clinical interpretation of the test result, the method sensitivity, and the use of a reference sequence. External quality assessment serves as a valuable educational tool in assessing and improving molecular testing quality and is an important asset for monitoring quality assurance upon incorporation of new biomarkers in diagnostic services. Copyright © 2014 American Society for Investigative Pathology and the Association for Molecular Pathology. Published by Elsevier Inc. All rights reserved.

Assessment of surface water quality using hierarchical cluster analysis

Directory of Open Access Journals (Sweden)

Dheeraj Kumar Dabgerwal

2016-02-01

Full Text Available This study was carried out to assess the physicochemical quality river Varuna inVaranasi,India. Water samples were collected from 10 sites during January-June 2015. Pearson correlation analysis was used to assess the direction and strength of relationship between physicochemical parameters. Hierarchical Cluster analysis was also performed to determine the sources of pollution in the river Varuna. The result showed quite high value of DO, Nitrate, BOD, COD and Total Alkalinity, above the BIS permissible limit. The results of correlation analysis identified key water parameters as pH, electrical conductivity, total alkalinity and nitrate, which influence the concentration of other water parameters. Cluster analysis identified three major clusters of sampling sites out of total 10 sites, according to the similarity in water quality. This study illustrated the usefulness of correlation and cluster analysis for getting better information about the river water quality.International Journal of Environment Vol. 5 (1 2016,  pp: 32-44

Evaluation of primary immunization coverage of infants under universal immunization programme in an urban area of Bangalore city using cluster sampling and lot quality assurance sampling techniques

Directory of Open Access Journals (Sweden)

Punith K

2008-01-01

Full Text Available Research Question: Is LQAS technique better than cluster sampling technique in terms of resources to evaluate the immunization coverage in an urban area? Objective: To assess and compare the lot quality assurance sampling against cluster sampling in the evaluation of primary immunization coverage. Study Design: Population-based cross-sectional study. Study Setting: Areas under Mathikere Urban Health Center. Study Subjects: Children aged 12 months to 23 months. Sample Size: 220 in cluster sampling, 76 in lot quality assurance sampling. Statistical Analysis: Percentages and Proportions, Chi square Test. Results: (1 Using cluster sampling, the percentage of completely immunized, partially immunized and unimmunized children were 84.09%, 14.09% and 1.82%, respectively. With lot quality assurance sampling, it was 92.11%, 6.58% and 1.31%, respectively. (2 Immunization coverage levels as evaluated by cluster sampling technique were not statistically different from the coverage value as obtained by lot quality assurance sampling techniques. Considering the time and resources required, it was found that lot quality assurance sampling is a better technique in evaluating the primary immunization coverage in urban area.

Using lot quality-assurance sampling and area sampling to identify priority areas for trachoma control: Viet Nam.

Science.gov (United States)

Myatt, Mark; Mai, Nguyen Phuong; Quynh, Nguyen Quang; Nga, Nguyen Huy; Tai, Ha Huy; Long, Nguyen Hung; Minh, Tran Hung; Limburg, Hans

2005-10-01

To report on the use of lot quality-assurance sampling (LQAS) surveys undertaken within an area-sampling framework to identify priority areas for intervention with trachoma control activities in Viet Nam. The LQAS survey method for the rapid assessment of the prevalence of active trachoma was adapted for use in Viet Nam with the aim of classifying individual communes by the prevalence of active trachoma among children in primary school. School-based sampling was used; school sites to be sampled were selected using an area-sampling approach. A total of 719 communes in 41 districts in 18 provinces were surveyed. Survey staff found the LQAS survey method both simple and rapid to use after initial problems with area-sampling methods were identified and remedied. The method yielded a finer spatial resolution of prevalence than had been previously achieved in Viet Nam using semiquantitative rapid assessment surveys and multistage cluster-sampled surveys. When used with area-sampling techniques, the LQAS survey method has the potential to form the basis of survey instruments that can be used to efficiently target resources for interventions against active trachoma. With additional work, such methods could provide a generally applicable tool for effective programme planning and for the certification of the elimination of trachoma as a blinding disease.

Welfare Quality assessment protocol for laying hens = Welfare Quality assessment protocol voor leghennen

NARCIS (Netherlands)

Niekerk, van T.G.C.M.; Gunnink, H.; Reenen, van C.G.

2012-01-01

Results of a study on the Welfare Quality® assessment protocol for laying hens. It reports the development of the integration of welfare assessment as scores per criteria as well as simplification of the Welfare Quality® assessment protocol. Results are given from assessment of 122 farms.

Searching for the Optimal Sampling Solution: Variation in Invertebrate Communities, Sample Condition and DNA Quality.

Directory of Open Access Journals (Sweden)

Martin M Gossner

Full Text Available There is a great demand for standardising biodiversity assessments in order to allow optimal comparison across research groups. For invertebrates, pitfall or flight-interception traps are commonly used, but sampling solution differs widely between studies, which could influence the communities collected and affect sample processing (morphological or genetic. We assessed arthropod communities with flight-interception traps using three commonly used sampling solutions across two forest types and two vertical strata. We first considered the effect of sampling solution and its interaction with forest type, vertical stratum, and position of sampling jar at the trap on sample condition and community composition. We found that samples collected in copper sulphate were more mouldy and fragmented relative to other solutions which might impair morphological identification, but condition depended on forest type, trap type and the position of the jar. Community composition, based on order-level identification, did not differ across sampling solutions and only varied with forest type and vertical stratum. Species richness and species-level community composition, however, differed greatly among sampling solutions. Renner solution was highly attractant for beetles and repellent for true bugs. Secondly, we tested whether sampling solution affects subsequent molecular analyses and found that DNA barcoding success was species-specific. Samples from copper sulphate produced the fewest successful DNA sequences for genetic identification, and since DNA yield or quality was not particularly reduced in these samples additional interactions between the solution and DNA must also be occurring. Our results show that the choice of sampling solution should be an important consideration in biodiversity studies. Due to the potential bias towards or against certain species by Ethanol-containing sampling solution we suggest ethylene glycol as a suitable sampling solution when

Human DNA quantification and sample quality assessment: Developmental validation of the PowerQuant(®) system.

Science.gov (United States)

Ewing, Margaret M; Thompson, Jonelle M; McLaren, Robert S; Purpero, Vincent M; Thomas, Kelli J; Dobrowski, Patricia A; DeGroot, Gretchen A; Romsos, Erica L; Storts, Douglas R

2016-07-01

Quantification of the total amount of human DNA isolated from a forensic evidence item is crucial for DNA normalization prior to short tandem repeat (STR) DNA analysis and a federal quality assurance standard requirement. Previous commercial quantification methods determine the total human DNA and total human male DNA concentrations, but provide limited information about the condition of the DNA sample. The PowerQuant(®) System includes targets for quantification of total human and total human male DNA as well as targets for evaluating whether the human DNA is degraded and/or PCR inhibitors are present in the sample. A developmental validation of the PowerQuant(®) System was completed, following SWGDAM Validation Guidelines, to evaluate the assay's specificity, sensitivity, precision and accuracy, as well as the ability to detect degraded DNA or PCR inhibitors. In addition to the total human DNA and total human male DNA concentrations in a sample, data from the degradation target and internal PCR control (IPC) provide a forensic DNA analyst meaningful information about the quality of the isolated human DNA and the presence of PCR inhibitors in the sample that can be used to determine the most effective workflow and assist downstream interpretation. Copyright © 2016 The Author(s). Published by Elsevier Ireland Ltd.. All rights reserved.

Assessing primary care data quality.

Science.gov (United States)

Lim, Yvonne Mei Fong; Yusof, Maryati; Sivasampu, Sheamini

2018-04-16

Purpose The purpose of this paper is to assess National Medical Care Survey data quality. Design/methodology/approach Data completeness and representativeness were computed for all observations while other data quality measures were assessed using a 10 per cent sample from the National Medical Care Survey database; i.e., 12,569 primary care records from 189 public and private practices were included in the analysis. Findings Data field completion ranged from 69 to 100 per cent. Error rates for data transfer from paper to web-based application varied between 0.5 and 6.1 per cent. Error rates arising from diagnosis and clinical process coding were higher than medication coding. Data fields that involved free text entry were more prone to errors than those involving selection from menus. The authors found that completeness, accuracy, coding reliability and representativeness were generally good, while data timeliness needs to be improved. Research limitations/implications Only data entered into a web-based application were examined. Data omissions and errors in the original questionnaires were not covered. Practical implications Results from this study provided informative and practicable approaches to improve primary health care data completeness and accuracy especially in developing nations where resources are limited. Originality/value Primary care data quality studies in developing nations are limited. Understanding errors and missing data enables researchers and health service administrators to prevent quality-related problems in primary care data.

Social Advertising Quality: Assessment Criteria

Directory of Open Access Journals (Sweden)

S. B. Kalmykov

2017-01-01

Full Text Available Purpose: the The purpose of the publication is development of existing criterial assessment in social advertising sphere. The next objectives are provided for its achievement: to establish research methodology, to develop the author’s version of necessary notional apparatus and conceptual generalization, to determine the elements of social advertising quality, to establish the factors of its quality, to conduct the systematization of existing criteria and measuring instruments of quality assessment, to form new criteria of social advertising quality, to apply received results for development of criterial assessment to determine the further research perspectives. Methods: the methodology of research of management of social advertising interaction with target audience, which has dynamic procedural character with use of sociological knowledge multivariate paradigmatic status, has been proposed. Results: the primary received results: the multivariate paradigmatic research basis with use of works of famous domestic and foreign scientists in sociology, qualimetry and management spheres; the definitions of social advertising, its quality, sociological quality provision system, target audience behavior model during social advertising interaction are offered; the quality factors with three groups by level of effect on consumer are established; the systematization of existing quality and its measure instruments assessment criteria by detected social advertising quality elements are conducted; the two new criteria and its management quality assessment measuring instruments in social advertising sphere are developed; the one of the common groups of production quality criteria – adaptability with considering of new management quality criteria and conducted systematization of existing social advertising creative quality assessment criteria development; the perspective of further perfection of quality criterial assessment based on social advertising

Microbiological assessment along the fish production chain of the Norwegian pelagic fisheries sector--Results from a spot sampling programme.

Science.gov (United States)

Svanevik, Cecilie Smith; Roiha, Irja Sunde; Levsen, Arne; Lunestad, Bjørn Tore

2015-10-01

Microbes play an important role in the degradation of fish products, thus better knowledge of the microbiological conditions throughout the fish production chain may help to optimise product quality and resource utilisation. This paper presents the results of a ten-year spot sampling programme (2005-2014) of the commercially most important pelagic fish species harvested in Norway. Fish-, surface-, and storage water samples were collected from fishing vessels and processing factories. Totally 1,181 samples were assessed with respect to microbiological quality, hygiene and food safety. We introduce a quality and safety assessment scheme for fresh pelagic fish recommending limits for heterotrophic plate counts (HPC), thermos tolerant coliforms, enterococci and Listeria monocytogenes. According to the scheme, in 25 of 41 samplings, sub-optimal conditions were found with respect to quality, whereas in 21 and 9 samplings, samples were not in compliance concerning hygiene and food safety, respectively. The present study has revealed that the quality of pelagic fish can be optimised by improving the hygiene conditions at some critical points at an early phase of the production chain. Thus, the proposed assessment scheme may provide a useful tool for the industry to optimise quality and maintain consumer safety of pelagic fishery products. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Microbiological Quality Assessment of Ready-To-Eat Kilishi Sold in ...

African Journals Online (AJOL)

Microbiological Quality Assessment of Ready-To-Eat Kilishi Sold in Abuja, Nigeria. ... Animal Production Research Advances ... A total of twelve samples of ready-to-eat dried meat product, kilishi, were purchased from different sale-points in Abuja, Nigeria and a study conducted on them to assess their microbiological ...

Improving data quality and supervision of antiretroviral therapy sites in Malawi: an application of Lot Quality Assurance Sampling

Directory of Open Access Journals (Sweden)

Hedt-Gauthier Bethany L

2012-07-01

Full Text Available Abstract Background High quality program data is critical for managing, monitoring, and evaluating national HIV treatment programs. By 2009, the Malawi Ministry of Health had initiated more than 270,000 patients on HIV treatment at 377 sites. Quarterly supervision of these antiretroviral therapy (ART sites ensures high quality care, but the time currently dedicated to exhaustive record review and data cleaning detracts from other critical components. The exhaustive record review is unlikely to be sustainable long term because of the resources required and increasing number of patients on ART. This study quantifies the current levels of data quality and evaluates Lot Quality Assurance Sampling (LQAS as a tool to prioritize sites with low data quality, thus lowering costs while maintaining sufficient quality for program monitoring and patient care. Methods In January 2010, a study team joined supervision teams at 19 sites purposely selected to reflect the variety of ART sites. During the exhaustive data review, the time allocated to data cleaning and data discrepancies were documented. The team then randomly sampled 76 records from each site, recording secondary outcomes and the time required for sampling. Results At the 19 sites, only 1.2% of records had discrepancies in patient outcomes and 0.4% in treatment regimen. However, data cleaning took 28.5 hours in total, suggesting that data cleaning for all 377 ART sites would require over 350 supervision-hours quarterly. The LQAS tool accurately identified the sites with the low data quality, reduced the time for data cleaning by 70%, and allowed for reporting on secondary outcomes. Conclusions Most sites maintained high quality records. In spite of this, data cleaning required significant amounts of time with little effect on program estimates of patient outcomes. LQAS conserves resources while maintaining sufficient data quality for program assessment and management to allow for quality patient

Improving data quality and supervision of antiretroviral therapy sites in Malawi: an application of Lot Quality Assurance Sampling.

Science.gov (United States)

Hedt-Gauthier, Bethany L; Tenthani, Lyson; Mitchell, Shira; Chimbwandira, Frank M; Makombe, Simon; Chirwa, Zengani; Schouten, Erik J; Pagano, Marcello; Jahn, Andreas

2012-07-09

High quality program data is critical for managing, monitoring, and evaluating national HIV treatment programs. By 2009, the Malawi Ministry of Health had initiated more than 270,000 patients on HIV treatment at 377 sites. Quarterly supervision of these antiretroviral therapy (ART) sites ensures high quality care, but the time currently dedicated to exhaustive record review and data cleaning detracts from other critical components. The exhaustive record review is unlikely to be sustainable long term because of the resources required and increasing number of patients on ART. This study quantifies the current levels of data quality and evaluates Lot Quality Assurance Sampling (LQAS) as a tool to prioritize sites with low data quality, thus lowering costs while maintaining sufficient quality for program monitoring and patient care. In January 2010, a study team joined supervision teams at 19 sites purposely selected to reflect the variety of ART sites. During the exhaustive data review, the time allocated to data cleaning and data discrepancies were documented. The team then randomly sampled 76 records from each site, recording secondary outcomes and the time required for sampling. At the 19 sites, only 1.2% of records had discrepancies in patient outcomes and 0.4% in treatment regimen. However, data cleaning took 28.5 hours in total, suggesting that data cleaning for all 377 ART sites would require over 350 supervision-hours quarterly. The LQAS tool accurately identified the sites with the low data quality, reduced the time for data cleaning by 70%, and allowed for reporting on secondary outcomes. Most sites maintained high quality records. In spite of this, data cleaning required significant amounts of time with little effect on program estimates of patient outcomes. LQAS conserves resources while maintaining sufficient data quality for program assessment and management to allow for quality patient care.

Food and feed safety assessment: the importance of proper sampling.

Science.gov (United States)

Kuiper, Harry A; Paoletti, Claudia

2015-01-01

The general principles for safety and nutritional evaluation of foods and feed and the potential health risks associated with hazardous compounds are described as developed by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO) and further elaborated in the European Union-funded project Safe Foods. We underline the crucial role of sampling in foods/feed safety assessment. High quality sampling should always be applied to ensure the use of adequate and representative samples as test materials for hazard identification, toxicological and nutritional characterization of identified hazards, as well as for estimating quantitative and reliable exposure levels of foods/feed or related compounds of concern for humans and animals. The importance of representative sampling is emphasized through examples of risk analyses in different areas of foods/feed production. The Theory of Sampling (TOS) is recognized as the only framework within which to ensure accuracy and precision of all sampling steps involved in the field-to-fork continuum, which is crucial to monitor foods and feed safety. Therefore, TOS must be integrated in the well-established FAO/WHO risk assessment approach in order to guarantee a transparent and correct frame for the risk assessment and decision making process.

Headspace screening: A novel approach for fast quality assessment of the essential oil from culinary sage.

Science.gov (United States)

Cvetkovikj, Ivana; Stefkov, Gjoshe; Acevska, Jelena; Karapandzova, Marija; Dimitrovska, Aneta; Kulevanova, Svetlana

2016-07-01

Quality assessment of essential oil (EO) from culinary sage (Salvia officinalis L., Lamiaceae) is limited by the long pharmacopoeial procedure. The aim of this study was to employ headspace (HS) sampling in the quality assessment of sage EO. Different populations (30) of culinary sage were assessed using GC/FID/MS analysis of the hydrodistilled EO (pharmacopoeial method) and HS sampling directly from leaves. Compound profiles from both procedures were evaluated according to ISO 9909 and GDC standards for sage EO quality, revealing compliance for only 10 populations. Factors to convert HS values, for the target ISO and GDC components, into theoretical EO values were calculated. Statistical analysis revealed a significant relationship between HS and EO values for seven target components. Consequently, HS sampling could be used as a complementary extraction technique for rapid screening in quality assessment of sage EOs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing genetic polymorphisms using DNA extracted from cells present in saliva samples

Directory of Open Access Journals (Sweden)

Nemoda Zsofia

2011-12-01

Full Text Available Abstract Background Technical advances following the Human Genome Project revealed that high-quality and -quantity DNA may be obtained from whole saliva samples. However, usability of previously collected samples and the effects of environmental conditions on the samples during collection have not been assessed in detail. In five studies we document the effects of sample volume, handling and storage conditions, type of collection device, and oral sampling location, on quantity, quality, and genetic assessment of DNA extracted from cells present in saliva. Methods Saliva samples were collected from ten adults in each study. Saliva volumes from .10-1.0 ml, different saliva collection devices, sampling locations in the mouth, room temperature storage, and multiple freeze-thaw cycles were tested. One representative single nucleotide polymorphism (SNP in the catechol-0-methyltransferase gene (COMT rs4680 and one representative variable number of tandem repeats (VNTR in the serotonin transporter gene (5-HTTLPR: serotonin transporter linked polymorphic region were selected for genetic analyses. Results The smallest tested whole saliva volume of .10 ml yielded, on average, 1.43 ± .77 μg DNA and gave accurate genotype calls in both genetic analyses. The usage of collection devices reduced the amount of DNA extracted from the saliva filtrates compared to the whole saliva sample, as 54-92% of the DNA was retained on the device. An "adhered cell" extraction enabled recovery of this DNA and provided good quality and quantity DNA. The DNA from both the saliva filtrates and the adhered cell recovery provided accurate genotype calls. The effects of storage at room temperature (up to 5 days, repeated freeze-thaw cycles (up to 6 cycles, and oral sampling location on DNA extraction and on genetic analysis from saliva were negligible. Conclusions Whole saliva samples with volumes of at least .10 ml were sufficient to extract good quality and quantity DNA. Using

Tracking the Quality of Care for Sick Children Using Lot Quality Assurance Sampling: Targeting Improvements of Health Services in Jigawa, Nigeria

OpenAIRE

Oladele, Edward Adekola; Ormond, Louise; Adeyemi, Olusegun; Patrick, David; Okoh, Festus; Oresanya, Olusola Bukola; Valadez, Joseph J.

2012-01-01

BACKGROUND\\ud \\ud In Nigeria, 30% of child deaths are due to malaria. The National Malaria Control Program of Nigeria (NMCP) during 2009 initiated a program to improve the quality of paediatric malaria services delivered in health facilities (HF). This study reports a rapid approach used to assess the existing quality of services in Jigawa state at decentralised levels of the health system.\\ud \\ud METHODS\\ud \\ud NMCP selected Lot Quality Assurance Sampling (LQAS) to identify the variation in ...

Quality Assessment of TPB-Based Questionnaires: A Systematic Review

Science.gov (United States)

Oluka, Obiageli Crystal; Nie, Shaofa; Sun, Yi

2014-01-01

Objective This review is aimed at assessing the quality of questionnaires and their development process based on the theory of planned behavior (TPB) change model. Methods A systematic literature search for studies with the primary aim of TPB-based questionnaire development was conducted in relevant databases between 2002 and 2012 using selected search terms. Ten of 1,034 screened abstracts met the inclusion criteria and were assessed for methodological quality using two different appraisal tools: one for the overall methodological quality of each study and the other developed for the appraisal of the questionnaire content and development process. Both appraisal tools consisted of items regarding the likelihood of bias in each study and were eventually combined to give the overall quality score for each included study. Results 8 of the 10 included studies showed low risk of bias in the overall quality assessment of each study, while 9 of the studies were of high quality based on the quality appraisal of questionnaire content and development process. Conclusion Quality appraisal of the questionnaires in the 10 reviewed studies was successfully conducted, highlighting the top problem areas (including: sample size estimation; inclusion of direct and indirect measures; and inclusion of questions on demographics) in the development of TPB-based questionnaires and the need for researchers to provide a more detailed account of their development process. PMID:24722323

Assessment of drinking water quality around Kudankulam nuclear power plant site using fuzzy synthetic evaluation

International Nuclear Information System (INIS)

Ramesh, S.; Pratheeba, V.; Murugesan, A.G.; Dahiya, S.

2007-01-01

A method based on concept of fuzzy set theory is used for decision-making in the assessment of physicochemical quality of drinking water. Conventional method for water quality assessment does not consider the uncertainties involved either in measurement of water quality parameters or in the limits provided by the regulatory bodies. Fuzzy synthetic evaluation model gives the certainty levels for the quality class of the water based on the prescribed limit of various regulatory bodies and opinion of the experts from the field of drinking water quality. In this paper application of fuzzy rule based method is illustrated with twelve drinking water samples from the residential locality in the vicinity of Kudankulam Nuclear Power Plant site. These samples were analysed for fifteen different physico-chemical parameters, out of them eleven important parameters were used for the quality assessment using fuzzy synthetic evaluation approach. From this study. it has been concluded that out of 12 samples seven are in desirable category with certainty level of 53-100 percent and rest of the samples belongs to acceptable category whose certainty level ranges from 67 to 96 percent. Water from these sources can be used for the drinking purpose if alternate water source is not available without any health concern on the basis of physicochemical characteristics. (author)

Patent Assessment Quality

DEFF Research Database (Denmark)

Burke, Paul F.; Reitzig, Markus

2006-01-01

The increasing number of patent applications worldwide and the extension of patenting to the areas of software and business methods have triggered a debate on "patent quality". While patent quality may have various dimensions, this paper argues that consistency in the decision making on the side...... of the patent office is one important dimension, particularly in new patenting areas (emerging technologies). In order to understand whether patent offices appear capable of providing consistent assessments of a patent's technological quality in such novel industries from the beginning, we study the concordance...... of the European Patent Office's (EPO's) granting and opoposition decisions for individual patents. We use the historical example of biotech patens filed between 1978 until 1986, the early stage of the industry. Our results indicate that the EPO shows systematically different assessments of technological quality...

OCT as a convenient tool to assess the quality and application of organotypic retinal samples

Science.gov (United States)

Gater, Rachel; Khoshnaw, Nicholas; Nguyen, Dan; El Haj, Alicia J.; Yang, Ying

2016-03-01

Eye diseases such as macular degeneration and glaucoma have profound consequences on the quality of human life. Without treatment, these diseases can lead to loss of sight. To develop better treatments for retinal diseases, including cell therapies and drug intervention, establishment of an efficient and reproducible 3D native retinal tissue system, enabled over a prolonged culture duration, will be valuable. The retina is a complex tissue, consisting of ten layers with a different density and cellular composition to each. Uniquely, as a light transmitting tissue, retinal refraction of light differs among the layers, forming a good basis to use optical coherence tomography (OCT) in assessing the layered structure of the retina and its change during the culture and treatments. In this study, we develop a new methodology to generate retinal organotypic tissues and compare two substrates: filter paper and collagen hydrogel, to culture the organotypic tissue. Freshly slaughtered pig eyes have been obtained for use in this study. The layered morphology of intact organotypic retinal tissue cultured on two different substrates has been examined by spectral domain OCT. The viability of the tissues has been examined by live/dead fluorescence dye kit to cross validate the OCT images. For the first time, it is demonstrated that the use of a collagen hydrogel supports the viability of retinal organotypic tissue, capable of prolonged culture up to 2 weeks. OCT is a convenient tool for appraising the quality and application of organotypic retinal samples and is important in the development of current organotypic models.

Information System Quality Assessment Methods

OpenAIRE

Korn, Alexandra

2014-01-01

This thesis explores challenging topic of information system quality assessment and mainly process assessment. In this work the term Information System Quality is defined as well as different approaches in a quality definition for different domains of information systems are outlined. Main methods of process assessment are overviewed and their relationships are described. Process assessment methods are divided into two categories: ISO standards and best practices. The main objective of this w...

Major ion chemistry and quality assessment of groundwater in Haripur area

International Nuclear Information System (INIS)

Akram, W.; Tariq, J.A.; Ahmad, M.

2011-07-01

Study was conducted for investigating chemical composition of groundwater, identifying the compositional types of groundwater, delineating the processes controlling the groundwater chemistry and assessing the groundwater quality for drinking / irrigation uses. Groundwater samples collected from shallow (hand pumps, open well, motor pumps) and deep (tube wells) aquifers were analyzed for major cations (Na/sup +/,K/sup +, Ca/sup 2+/, Mg/sup 2+/) and anions (HCO/sub 3/, Cl/sup '/, SO/sub 4/). The data indicated that Ca/sub 2/ is the dominant cation in most of the samples followed by Mg/sup 2+/ whereas HCO/sub 3/ is the most abundant anion in all samples. Hydrochemistry provides a clear indication of active recharge of shallow and deep aquifers by modern meteoric water. Carbonate dissolution was found to be the prevailing process controlling the groundwater chemistry. Chemical quality was assessed for drinking purpose by comparing with WHO, Indian and national standards, and for irrigation purpose using empirical indices such as SAR and RSC. The results show that groundwater meets the norms of good quality drinking water and can be safely used for irrigation. (author)

Using Data Mining for Wine Quality Assessment

Science.gov (United States)

Cortez, Paulo; Teixeira, Juliana; Cerdeira, António; Almeida, Fernando; Matos, Telmo; Reis, José

Certification and quality assessment are crucial issues within the wine industry. Currently, wine quality is mostly assessed by physicochemical (e.g alcohol levels) and sensory (e.g. human expert evaluation) tests. In this paper, we propose a data mining approach to predict wine preferences that is based on easily available analytical tests at the certification step. A large dataset is considered with white vinho verde samples from the Minho region of Portugal. Wine quality is modeled under a regression approach, which preserves the order of the grades. Explanatory knowledge is given in terms of a sensitivity analysis, which measures the response changes when a given input variable is varied through its domain. Three regression techniques were applied, under a computationally efficient procedure that performs simultaneous variable and model selection and that is guided by the sensitivity analysis. The support vector machine achieved promising results, outperforming the multiple regression and neural network methods. Such model is useful for understanding how physicochemical tests affect the sensory preferences. Moreover, it can support the wine expert evaluations and ultimately improve the production.

Design and methods of the Midwest Stream Quality Assessment (MSQA), 2013

Science.gov (United States)

Garrett, Jessica D.; Frey, Jeffrey W.; Van Metre, Peter C.; Journey, Celeste A.; Nakagaki, Naomi; Button, Daniel T.; Nowell, Lisa H.

2017-10-18

During 2013, the U.S. Geological Survey (USGS) National Water-Quality Assessment Project (NAWQA), in collaboration with the USGS Columbia Environmental Research Center, the U.S. Environmental Protection Agency (EPA) National Rivers and Streams Assessment (NRSA), and the EPA Office of Pesticide Programs assessed stream quality across the Midwestern United States. This Midwest Stream Quality Assessment (MSQA) simultaneously characterized watershed and stream-reach water-quality stressors along with instream biological conditions, to better understand regional stressor-effects relations. The MSQA design focused on effects from the widespread agriculture in the region and urban development because of their importance as ecological stressors of particular concern to Midwest region resource managers.A combined random stratified selection and a targeted selection based on land-use data were used to identify and select sites representing gradients in agricultural intensity across the region. During a 14-week period from May through August 2013, 100 sites were selected and sampled 12 times for contaminants, nutrients, and sediment. This 14-week water-quality “index” period culminated with an ecological survey of habitat, periphyton, benthic macroinvertebrates, and fish at all sites. Sediment was collected during the ecological survey for analysis of sediment chemistry and toxicity testing. Of the 100 sites, 50 were selected for the MSQA random stratified group from 154 NRSA sites planned for the region, and the other 50 MSQA sites were selected as targeted sites to more evenly cover agricultural and urban stressor gradients in the study area. Of the 50 targeted sites, 12 were in urbanized watersheds and 21 represented “good” biological conditions or “least disturbed” conditions. The remaining 17 targeted sites were selected to improve coverage of the agricultural intensity gradient or because of historical data collection to provide temporal context for the

Water Quality Assessment of Ayeyarwady River in Myanmar

Science.gov (United States)

Thatoe Nwe Win, Thanda; Bogaard, Thom; van de Giesen, Nick

2015-04-01

Myanmar's socio-economic activities, urbanisation, industrial operations and agricultural production have increased rapidly in recent years. With the increase of socio-economic development and climate change impacts, there is an increasing threat on quantity and quality of water resources. In Myanmar, some of the drinking water coverage still comes from unimproved sources including rivers. The Ayeyarwady River is the main river in Myanmar draining most of the country's area. The use of chemical fertilizer in the agriculture, the mining activities in the catchment area, wastewater effluents from the industries and communities and other development activities generate pollutants of different nature. Therefore water quality monitoring is of utmost importance. In Myanmar, there are many government organizations linked to water quality management. Each water organization monitors water quality for their own purposes. The monitoring is haphazard, short term and based on individual interest and the available equipment. The monitoring is not properly coordinated and a quality assurance programme is not incorporated in most of the work. As a result, comprehensive data on the water quality of rivers in Myanmar is not available. To provide basic information, action is needed at all management levels. The need for comprehensive and accurate assessments of trends in water quality has been recognized. For such an assessment, reliable monitoring data are essential. The objective of our work is to set-up a multi-objective surface water quality monitoring programme. The need for a scientifically designed network to monitor the Ayeyarwady river water quality is obvious as only limited and scattered data on water quality is available. However, the set-up should also take into account the current socio-economic situation and should be flexible to adjust after first years of monitoring. Additionally, a state-of-the-art baseline river water quality sampling program is required which

A novel, fuzzy-based air quality index (FAQI) for air quality assessment

Science.gov (United States)

Sowlat, Mohammad Hossein; Gharibi, Hamed; Yunesian, Masud; Tayefeh Mahmoudi, Maryam; Lotfi, Saeedeh

2011-04-01

The ever increasing level of air pollution in most areas of the world has led to development of a variety of air quality indices for estimation of health effects of air pollution, though the indices have their own limitations such as high levels of subjectivity. Present study, therefore, aimed at developing a novel, fuzzy-based air quality index (FAQI ) to handle such limitations. The index developed by present study is based on fuzzy logic that is considered as one of the most common computational methods of artificial intelligence. In addition to criteria air pollutants (i.e. CO, SO 2, PM 10, O 3, NO 2), benzene, toluene, ethylbenzene, xylene, and 1,3-butadiene were also taken into account in the index proposed, because of their considerable health effects. Different weighting factors were then assigned to each pollutant according to its priority. Trapezoidal membership functions were employed for classifications and the final index consisted of 72 inference rules. To assess the performance of the index, a case study was carried out employing air quality data at five different sampling stations in Tehran, Iran, from January 2008 to December 2009, results of which were then compared to the results obtained from USEPA air quality index (AQI). According to the results from present study, fuzzy-based air quality index is a comprehensive tool for classification of air quality and tends to produce accurate results. Therefore, it can be considered useful, reliable, and suitable for consideration by local authorities in air quality assessment and management schemes. Fuzzy-based air quality index (FAQI).

Air Quality Assessment Using Interpolation Technique

Directory of Open Access Journals (Sweden)

Awkash Kumar

2016-07-01

Full Text Available Air pollution is increasing rapidly in almost all cities around the world due to increase in population. Mumbai city in India is one of the mega cities where air quality is deteriorating at a very rapid rate. Air quality monitoring stations have been installed in the city to regulate air pollution control strategies to reduce the air pollution level. In this paper, air quality assessment has been carried out over the sample region using interpolation techniques. The technique Inverse Distance Weighting (IDW of Geographical Information System (GIS has been used to perform interpolation with the help of concentration data on air quality at three locations of Mumbai for the year 2008. The classification was done for the spatial and temporal variation in air quality levels for Mumbai region. The seasonal and annual variations of air quality levels for SO2, NOx and SPM (Suspended Particulate Matter have been focused in this study. Results show that SPM concentration always exceeded the permissible limit of National Ambient Air Quality Standard. Also, seasonal trends of pollutant SPM was low in monsoon due rain fall. The finding of this study will help to formulate control strategies for rational management of air pollution and can be used for many other regions.

Quality assessment of laparoscopic hysterectomy

NARCIS (Netherlands)

Driessen, S.R.C.

2017-01-01

Quality assessment is surgical care is very important, though very difficult. With this thesis we attempted to overcome the limitations of currently used quality indicators and developed a dynamic, unique quality assessment tool to reflect upon individual surgical performance with case-mix

Conformity Assessment in Nuclear Material and Environmental Sample Analysis

International Nuclear Information System (INIS)

Aregbe, Y.; Jakopic, R.; Richter, S.; Venchiarutti, C.

2015-01-01

Safeguards conclusions are based to a large extent on comparison of measurement results between operator and safeguards laboratories. Measurement results must state traceability and uncertainties to be comparable. Recent workshops held at the IAEA and in the frame of the European Safeguards Research and Development Association (ESARDA), reviewed different approaches for Nuclear Material Balance Evaluation (MBE). Among those, the ''bottom-up'' approach requires assessment of operators and safeguards laboratories measurement systems and capabilities. Therefore, inter-laboratory comparisons (ILCs) with independent reference values provided for decades by JRC-IRMM, CEA/CETAMA and US DOE are instrumental to shed light on the current state of practice in measurements of nuclear material and environmental swipe samples. Participating laboratories are requested to report the measurement results with associated uncertainties, and have the possibility to benchmark those results against independent and traceable reference values. The measurement capability of both the IAEA Network of Analytical Laboratories (NWAL) and the nuclear operator's analytical services participating in ILCs can be assessed against the independent reference values as well as against internationally agreed quality goals, in compliance with ISO 13528:2005. The quality goals for nuclear material analysis are the relative combined standard uncertainties listed in the ITV2010. Concerning environmental swipe sample analysis, the IAEA defined measurement quality goals applied in conformity assessment. The paper reports examples from relevant inter-laboratory comparisons, looking at laboratory performance according to the purpose of the measurement and the possible use of the result in line with the IUPAC International Harmonized Protocol. Tendencies of laboratories to either overestimate and/or underestimate uncertainties are discussed using straightforward graphical tools to evaluate

quality assessment of sandcrete blocks produced in adeta, kwara

African Journals Online (AJOL)

HOD

This research assessed the quality of blocks produced in. Adeta, Ilorin West ... compared with the Nigerian Industrial Standards (NIS) specifications. ... to provide aesthetics to buildings and serve as control ... Cement is a construction material used in bonding with ... calculated as a percentage of the total sample weight.

Quality control in public participation assessments of water quality: the OPAL Water Survey.

Science.gov (United States)

Rose, N L; Turner, S D; Goldsmith, B; Gosling, L; Davidson, T A

2016-07-22

Public participation in scientific data collection is a rapidly expanding field. In water quality surveys, the involvement of the public, usually as trained volunteers, generally includes the identification of aquatic invertebrates to a broad taxonomic level. However, quality assurance is often not addressed and remains a key concern for the acceptance of publicly-generated water quality data. The Open Air Laboratories (OPAL) Water Survey, launched in May 2010, aimed to encourage interest and participation in water science by developing a 'low-barrier-to-entry' water quality survey. During 2010, over 3000 participant-selected lakes and ponds were surveyed making this the largest public participation lake and pond survey undertaken to date in the UK. But the OPAL approach of using untrained volunteers and largely anonymous data submission exacerbates quality control concerns. A number of approaches were used in order to address data quality issues including: sensitivity analysis to determine differences due to operator, sampling effort and duration; direct comparisons of identification between participants and experienced scientists; the use of a self-assessment identification quiz; the use of multiple participant surveys to assess data variability at single sites over short periods of time; comparison of survey techniques with other measurement variables and with other metrics generally considered more accurate. These quality control approaches were then used to screen the OPAL Water Survey data to generate a more robust dataset. The OPAL Water Survey results provide a regional and national assessment of water quality as well as a first national picture of water clarity (as suspended solids concentrations). Less than 10 % of lakes and ponds surveyed were 'poor' quality while 26.8 % were in the highest water quality band. It is likely that there will always be a question mark over untrained volunteer generated data simply because quality assurance is uncertain

The WIPP Water Quality Sampling Program

International Nuclear Information System (INIS)

Uhland, D.; Morse, J.G.; Colton, D.

1986-01-01

The Waste Isolation Pilot Plant (WIPP), a Department of Energy facility, will be used for the underground disposal of wastes. The Water Quality Sampling Program (WQSP) is designed to obtain representative and reproducible water samples to depict accurate water composition data for characterization and monitoring programs in the vicinity of the WIPP. The WQSP is designed to input data into four major programs for the WIPP project: Geochemical Site Characterization, Radiological Baseline, Environmental Baseline, and Performance Assessment. The water-bearing units of interest are the Culebra and Magneta Dolomite Members of the Rustler Formation, units in the Dewey Lake Redbeds, and the Bell Canyon Formation. At least two chemically distinct types of water occur in the Culebra, one being a sodium/potassium chloride water and the other being a calcium/magnesium sulfate water. Water from the Culebra wells to the south of the WIPP site is distinctly fresher and tends to be of the calcium/magnesium sulfate type. Water in the Culebra in the north and around the WIPP site is distinctly fresher and tends to be of the sodium/potassium chloride type and is much higher in total dissolved solids. The program, which is currently 1 year old, will continue throughout the life of the facility as part of the Environmental Monitoring Program

Reliability of medical audit in quality assessment of medical care

Directory of Open Access Journals (Sweden)

Camacho Luiz Antonio Bastos

1996-01-01

Full Text Available Medical audit of hospital records has been a major component of quality of care assessment, although physician judgment is known to have low reliability. We estimated interrater agreement of quality assessment in a sample of patients with cardiac conditions admitted to an American teaching hospital. Physician-reviewers used structured review methods designed to improve quality assessment based on judgment. Chance-corrected agreement for the items considered more relevant to process and outcome of care ranged from low to moderate (0.2 to 0.6, depending on the review item and the principal diagnoses and procedures the patients underwent. Results from several studies seem to converge on this point. Comparisons among different settings should be made with caution, given the sensitivity of agreement measurements to prevalence rates. Reliability of review methods in their current stage could be improved by combining the assessment of two or more reviewers, and by emphasizing outcome-oriented events.

The Northeast Stream Quality Assessment

Science.gov (United States)

Van Metre, Peter C.; Riva-Murray, Karen; Coles, James F.

2016-04-22

In 2016, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) is assessing stream quality in the northeastern United States. The goal of the Northeast Stream Quality Assessment (NESQA) is to assess the quality of streams in the region by characterizing multiple water-quality factors that are stressors to aquatic life and evaluating the relation between these stressors and biological communities. The focus of NESQA in 2016 will be on the effects of urbanization and agriculture on stream quality in all or parts of eight states: Connecticut, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont.Findings will provide the public and policymakers with information about the most critical factors affecting stream quality, thus providing insights about possible approaches to protect the health of streams in the region. The NESQA study will be the fourth regional study conducted as part of NAWQA and will be of similar design and scope to the first three, in the Midwest in 2013, the Southeast in 2014, and the Pacific Northwest in 2015 (http://txpub.usgs.gov/RSQA/).

Chapter 5: Quality assurance/quality control in stormwater sampling

Science.gov (United States)

Sampling the quality of stormwater presents unique challenges because stormwater flow is relatively short-lived with drastic variability. Furthermore, storm events often occur with little advance warning, outside conventional work hours, and under adverse weather conditions. Therefore, most stormwat...

Air quality assessment in Salim Slam Tunnel

International Nuclear Information System (INIS)

El-Fadel, M.; Hashisho, Z.; Saikaly, P.

1999-01-01

Full text.Vehicle emissions constitute a serious occupational environmental hazard particularly in confined spaces such as tunnels and underground parking garages. these emissions at elevated concentrations, can cause adverse health effects, which range from nausea and eye irritation to mutagenicity, carcinogenicity and even death. This paper presents an environmental air quality assessment in a tunnel located in a highly congested urban area. For this purpose, air samples were collected and analyzed for the presence of primary air pollutants, priority metals, and volatile organic carbons. Air quality modeling was conducted to simulate variations of pollutant concentrations in the tunnel under worst case scenarios including traffic congestion and no air ventilation. Field measurements and mathematical simulation results were used to develop a strategy for proper air quality management in tunnels

High quality copy number and genotype data from FFPE samples using Molecular Inversion Probe (MIP) microarrays

Energy Technology Data Exchange (ETDEWEB)

Wang, Yuker; Carlton, Victoria E.H.; Karlin-Neumann, George; Sapolsky, Ronald; Zhang, Li; Moorhead, Martin; Wang, Zhigang C.; Richardson, Andrea L.; Warren, Robert; Walther, Axel; Bondy, Melissa; Sahin, Aysegul; Krahe, Ralf; Tuna, Musaffe; Thompson, Patricia A.; Spellman, Paul T.; Gray, Joe W.; Mills, Gordon B.; Faham, Malek

2009-02-24

A major challenge facing DNA copy number (CN) studies of tumors is that most banked samples with extensive clinical follow-up information are Formalin-Fixed Paraffin Embedded (FFPE). DNA from FFPE samples generally underperforms or suffers high failure rates compared to fresh frozen samples because of DNA degradation and cross-linking during FFPE fixation and processing. As FFPE protocols may vary widely between labs and samples may be stored for decades at room temperature, an ideal FFPE CN technology should work on diverse sample sets. Molecular Inversion Probe (MIP) technology has been applied successfully to obtain high quality CN and genotype data from cell line and frozen tumor DNA. Since the MIP probes require only a small ({approx}40 bp) target binding site, we reasoned they may be well suited to assess degraded FFPE DNA. We assessed CN with a MIP panel of 50,000 markers in 93 FFPE tumor samples from 7 diverse collections. For 38 FFPE samples from three collections we were also able to asses CN in matched fresh frozen tumor tissue. Using an input of 37 ng genomic DNA, we generated high quality CN data with MIP technology in 88% of FFPE samples from seven diverse collections. When matched fresh frozen tissue was available, the performance of FFPE DNA was comparable to that of DNA obtained from matched frozen tumor (genotype concordance averaged 99.9%), with only a modest loss in performance in FFPE. MIP technology can be used to generate high quality CN and genotype data in FFPE as well as fresh frozen samples.

Soil bioassays as tools for sludge compost quality assessment

International Nuclear Information System (INIS)

Domene, Xavier; Sola, Laura; Ramirez, Wilson; Alcaniz, Josep M.; Andres, Pilar

2011-01-01

Composting is a waste management technology that is becoming more widespread as a response to the increasing production of sewage sludge and the pressure for its reuse in soil. In this study, different bioassays (plant germination, earthworm survival, biomass and reproduction, and collembolan survival and reproduction) were assessed for their usefulness in the compost quality assessment. Compost samples, from two different composting plants, were taken along the composting process, which were characterized and submitted to bioassays (plant germination and collembolan and earthworm performance). Results from our study indicate that the noxious effects of some of the compost samples observed in bioassays are related to the low organic matter stability of composts and the enhanced release of decomposition endproducts, with the exception of earthworms, which are favored. Plant germination and collembolan reproduction inhibition was generally associated with uncomposted sludge, while earthworm total biomass and reproduction were enhanced by these materials. On the other hand, earthworm and collembolan survival were unaffected by the degree of composting of the wastes. However, this pattern was clear in one of the composting procedures assessed, but less in the other, where the release of decomposition endproducts was lower due to its higher stability, indicating the sensitivity and usefulness of bioassays for the quality assessment of composts.

Assessment of Urban Infrastructure Quality and User Satisfaction in ...

African Journals Online (AJOL)

This study assessed urban infrastructure quality and the level of user satisfaction with urban infrastructure in low income residential neighbourhoods in Minna, Nigeria. Five (5) neighbourhoods were selected for the study, and a total of 250 housing units were sampled. Questionnaire was administered on households that fell ...

Groundwater-quality data in 12 GAMA study units: Results from the 2006–10 initial sampling period and the 2008–13 trend sampling period, California GAMA Priority Basin Project

Science.gov (United States)

Mathany, Timothy M.

2017-03-09

The Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) program was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey in cooperation with the California State Water Resources Control Board. From 2004 through 2012, the GAMA-PBP collected samples and assessed the quality of groundwater resources that supply public drinking water in 35 study units across the State. Selected sites in each study unit were sampled again approximately 3 years after initial sampling as part of an assessment of temporal trends in water quality by the GAMA-PBP. Twelve of the study units, initially sampled during 2006–11 (initial sampling period) and sampled a second time during 2008–13 (trend sampling period) to assess temporal trends, are the subject of this report.The initial sampling was designed to provide a spatially unbiased assessment of the quality of untreated groundwater used for public water supplies in the 12 study units. In these study units, 550 sampling sites were selected by using a spatially distributed, randomized, grid-based method to provide spatially unbiased representation of the areas assessed (grid sites, also called “status sites”). After the initial sampling period, 76 of the previously sampled status sites (approximately 10 percent in each study unit) were randomly selected for trend sampling (“trend sites”). The 12 study units sampled both during the initial sampling and during the trend sampling period were distributed among 6 hydrogeologic provinces: Coastal (Northern and Southern), Transverse Ranges and Selected Peninsular Ranges, Klamath, Modoc Plateau and Cascades, and Sierra Nevada Hydrogeologic Provinces. For the purposes of this trend report, the six hydrogeologic provinces were grouped into two hydrogeologic regions based on location: Coastal and Mountain.The groundwater samples were analyzed for a number of synthetic organic

SEMEN QUALITY ASSESSMENT OF NEW ZEALAND WHITE RABBIT BUCKS

Directory of Open Access Journals (Sweden)

Martyna Błaszczyk

2013-02-01

Full Text Available Rabbits have been extensively used as a model for large animals and humans. All the reproduction techniques employed with farm animals can be performed with the low-cost rabbit model, and certain placental membrane characteristics make them especially relevant for studies of human teratology. The purpose of this study was to assess semen quality of New Zealand White rabbits. The material represents semen samples collected from adult rabbits (n=30. The semen was obtained by means of artificial vagina. All samples were analyzed using CASA Sperm VisionTM system. To assessed spermatozoa morphology (the length and the width of head and tail; presence of abnormal spermatozoa we used QuickPhoto Micro system. Received data were statistically analyzed. Our research showed decrease of semen parameters value after one hour storage in 37°C. Correlation analysis showed negative correlation between presence of spermatozoa with separated flagellum and CASA parameters value e.g. motility, progressive motility, DAP, DCL, DSL, VAP, VCL, VSL, ALH and BCF. From among 3000 analyzed spermatozoa 14.2% posed abnormal forms. We observed negative influence of semen storage on its quality. Also negative correlations between all types of tail defect and motility of spermatozoa were detectedRabbits have been extensively used as a model for large animals and humans. All the reproduction techniques employed with farm animals can be performed with the low-cost rabbit model, and certain placental membrane characteristics make them especially relevant for studies of human teratology. The purpose of this study was to assess semen quality of New Zealand White rabbits. The material represents semen samples collected from adult rabbits (n=30. The semen was obtained by means of artificial vagina. All samples were analyzed using CASA Sperm VisionTM system. To assessed spermatozoa morphology (the length and the width of head and tail; presence of abnormal spermatozoa we used Quick

Quality assurance guidance for laboratory assessment plates in support of EM environmental sampling and analysis activities

International Nuclear Information System (INIS)

1994-05-01

This document is one of several guidance documents developed to support the EM (DOE Environmental Restoration and Waste Management) Analytical Services program. Its purpose is to introduce assessment plates that can be used to conduct performance assessments of an organization's or project's ability to meet quality goals for analytical laboratory activities. These assessment plates are provided as non-prescriptive guidance to EM-support organizations responsible for collection of environmental data for remediation and waste management programs at DOE facilities. The assessments evaluate objectively all components of the analytical laboratory process to determine their proper selection and use

Groundwater quality assessment using geospatial and statistical tools in Salem District, Tamil Nadu, India

Science.gov (United States)

Arulbalaji, P.; Gurugnanam, B.

2017-10-01

The water quality study of Salem district, Tamil Nadu has been carried out to assess the water quality for domestic and irrigation purposes. For this purpose, 59 groundwater samples were collected and analyzed for pH, electrical conductivity (EC), total dissolved solids (TDS), major anions (HCO3 -, CO3 -, F-, Cl-, NO2 - + NO3 -, and SO4 2-), major cations (Ca2+ Mg2+, Na+, and K+), alkalinity (ALK), and hardness (HAR). To assess the water quality, the following chemical parameters were calculated based on the analytical results, such as Piper plot, water quality index (WQI), sodium adsorption ratio (SAR), magnesium hazard (MH), Kelly index (KI), and residual sodium carbonate (RSC). Wilcox diagram represents that 23% of the samples are excellent to good, 40% of the samples are good to permissible, 10% of the samples are permissible to doubtful, 24% of the samples are doubtful unsuitable, and only 3% of the samples are unsuitable for irrigation. SAR values shows that 52% of the samples indicate high-to-very high and low-to-medium alkali water. KI values indicate good quality (30%) and not suitable (70%) for irrigation purposes. RSC values indicate that 89% of samples are suitable for irrigation purposes. MH reveals that 17% suitable and 83% samples are not suitable for irrigation purposes and for domestic purposes the excellent (8%), good (48%), and poor (44%). The agricultural waste, fertilizer used, soil leaching, urban runoff, livestock waste, and sewages are the sources of poor water quality. Some samples are not suitable for irrigation purposes due to high salinity, hardness, and magnesium concentration. In general, the groundwater of the Salem district was polluted by agricultural activities, anthropogenic activities, ion exchange, and weathering.

Soil structural quality assessment for soil protection regulation

Science.gov (United States)

Johannes, Alice; Boivin, Pascal

2017-04-01

Soil quality assessment is rapidly developing worldwide, though mostly focused on the monitoring of arable land and soil fertility. Soil protection regulations assess soil quality differently, focusing on priority pollutants and threshold values. The soil physical properties are weakly considered, due to lack of consensus and experimental difficulties faced with characterization. Non-disputable, easy to perform and inexpensive methods should be available for environmental regulation to be applied, which is unfortunately not the case. As a consequence, quantitative soil physical protection regulation is not applied, and inexpensive soil physical quality indicators for arable soil management are not available. Overcoming these limitations was the objective of a research project funded by the Swiss federal office for environment (FOEN). The main results and the perspectives of application are given in this presentation. A first step of the research was to characterize soils in a good structural state (reference soils) under different land use. The structural quality was assessed with field expertise and Visual Evaluation of the Soil Structure (VESS), and the physical properties were assessed with Shrinkage analysis. The relationships between the physical properties and the soil constituents were linear and highly determined. They represent the reference properties of the corresponding soils. In a second step, the properties of physically degraded soils were analysed and compared to the reference properties. This allowed defining the most discriminant parameters departing the different structure qualities and their threshold limits. Equivalent properties corresponding to these parameters but inexpensive and easy to determine were defined and tested. More than 90% of the samples were correctly classed with this method, which meets, therefore, the requirements for practical application in regulation. Moreover, result-oriented agri-environmental schemes for soil quality

Application of plant metabonomics in quality assessment for large-scale production of traditional Chinese medicine.

Science.gov (United States)

Ning, Zhangchi; Lu, Cheng; Zhang, Yuxin; Zhao, Siyu; Liu, Baoqin; Xu, Xuegong; Liu, Yuanyan

2013-07-01

The curative effects of traditional Chinese medicines are principally based on the synergic effect of their multi-targeting, multi-ingredient preparations, in contrast to modern pharmacology and drug development that often focus on a single chemical entity. Therefore, the method employing a few markers or pharmacologically active constituents to assess the quality and authenticity of the complex preparations has a number of severe challenges. Metabonomics can provide an effective platform for complex sample analysis. It is also reported to be applied to the quality analysis of the traditional Chinese medicine. Metabonomics enables comprehensive assessment of complex traditional Chinese medicines or herbal remedies and sample classification of diverse biological statuses, origins, or qualities in samples, by means of chemometrics. Identification, processing, and pharmaceutical preparation are the main procedures in the large-scale production of Chinese medicinal preparations. Through complete scans, plants metabonomics addresses some of the shortfalls of single analyses and presents a considerable potential to become a sharp tool for traditional Chinese medicine quality assessment. Georg Thieme Verlag KG Stuttgart · New York.

The Pacific northwest stream quality assessment

Science.gov (United States)

Van Metre, Peter C.; Morace, Jennifer L.; Sheibley, Rich W.

2015-01-01

In 2015, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) program is assessing stream quality in the Pacific Northwest. The goals of the Pacific Northwest Stream Quality Assessment (Pacific Northwest study) are to assess the quality of streams in the region by characterizing multiple water-quality factors that are stressors to aquatic life and to evaluate the relation between these stressors and biological communities. The effects of urbanization and agriculture on stream quality for the Puget Lowlands and Willamette Valley are the focus of this regional study. Findings will provide the public and policymakers with information regarding which human and environmental factors are the most critical in affecting stream quality and, thus, provide insights about possible approaches to protect or improve the health of streams in the region.

Tracking the quality of care for sick children using lot quality assurance sampling: targeting improvements of health services in Jigawa, Nigeria.

Directory of Open Access Journals (Sweden)

Edward Adekola Oladele

Full Text Available BACKGROUND: In Nigeria, 30% of child deaths are due to malaria. The National Malaria Control Program of Nigeria (NMCP during 2009 initiated a program to improve the quality of paediatric malaria services delivered in health facilities (HF. This study reports a rapid approach used to assess the existing quality of services in Jigawa state at decentralised levels of the health system. METHODS: NMCP selected Lot Quality Assurance Sampling (LQAS to identify the variation in HF service quality among Senatorial Districts (SD. LQAS was selected because it was affordable and could be used by local health workers (HW in a population-based survey. NMCP applied a 2-stage LQAS using a structured Rapid Health Facility Assessment (R-HFA tool to identify high and low performing SD for specified indicators. FINDINGS: LQAS identified variations in HF performance (n = 21 and enabled resources to be targeted to address priorities. All SD exhibited deficient essential services, supplies and equipment. Only 9.7% of HF had Artemisinin-based Combination Therapies and other first-line treatments for childhood illnesses. No SD and few HF exhibited adequate HW performance for the assessment, treatment or counselling of sick children. Using the IMCI algorithm, 17.5% of HW assessed the child's vaccination status, 46.8% assessed nutritional status, and 65.1% assessed children for dehydration. Only 5.1% of HW treatments were appropriate for the assessment. Exit interviews revealed that 5.1% of caregivers knew their children's illness, and only 19.9% could accurately describe how to administer the prescribed drug. CONCLUSION: This R-HFA, using LQAS principles, is a rapid, simple tool for assessing malaria services and can be used at scale. It identified technical deficiencies that could be corrected by improved continuing medical education, targeted supervision, and recurrent R-HFA assessments of the quality of services.

Tracking the quality of care for sick children using lot quality assurance sampling: targeting improvements of health services in Jigawa, Nigeria.

Science.gov (United States)

Oladele, Edward Adekola; Ormond, Louise; Adeyemi, Olusegun; Patrick, David; Okoh, Festus; Oresanya, Olusola Bukola; Valadez, Joseph J

2012-01-01

In Nigeria, 30% of child deaths are due to malaria. The National Malaria Control Program of Nigeria (NMCP) during 2009 initiated a program to improve the quality of paediatric malaria services delivered in health facilities (HF). This study reports a rapid approach used to assess the existing quality of services in Jigawa state at decentralised levels of the health system. NMCP selected Lot Quality Assurance Sampling (LQAS) to identify the variation in HF service quality among Senatorial Districts (SD). LQAS was selected because it was affordable and could be used by local health workers (HW) in a population-based survey. NMCP applied a 2-stage LQAS using a structured Rapid Health Facility Assessment (R-HFA) tool to identify high and low performing SD for specified indicators. LQAS identified variations in HF performance (n = 21) and enabled resources to be targeted to address priorities. All SD exhibited deficient essential services, supplies and equipment. Only 9.7% of HF had Artemisinin-based Combination Therapies and other first-line treatments for childhood illnesses. No SD and few HF exhibited adequate HW performance for the assessment, treatment or counselling of sick children. Using the IMCI algorithm, 17.5% of HW assessed the child's vaccination status, 46.8% assessed nutritional status, and 65.1% assessed children for dehydration. Only 5.1% of HW treatments were appropriate for the assessment. Exit interviews revealed that 5.1% of caregivers knew their children's illness, and only 19.9% could accurately describe how to administer the prescribed drug. This R-HFA, using LQAS principles, is a rapid, simple tool for assessing malaria services and can be used at scale. It identified technical deficiencies that could be corrected by improved continuing medical education, targeted supervision, and recurrent R-HFA assessments of the quality of services.

Indoor air quality investigation and health risk assessment at correctional institutions.

Science.gov (United States)

Ofungwu, Joseph

2005-04-01

A comprehensive indoor air-quality (IAQ) investigation was conducted at a state correctional facility in New Jersey, USA with a lengthy history of IAQ problems. The IAQ investigation comprised preliminary indoor air screening using direct readout instrumentation, indoor air/surface wipe sampling and laboratory analysis, as well as a heating, ventilation, and air-conditioning system evaluation, and a building envelope survey. In addition to air sampling, a human health risk assessment was performed to evaluate the potential for exposure to site-related air contaminants with respect to the inmate and worker populations. The risk assessment results for the prison facility indicated the potential for significant health risks for the inmate population, possibly reflecting the effects of their confinement and extended exposure to indoor air contaminants, as compared to the prison guard and worker population. Based on the results of the risk assessment, several mitigation measures are recommended to minimize prison population health risks and improve indoor air quality at prison facilities.

An Assessment of the AGA and CCFA Quality Indicators in a Sample of Patients Diagnosed with Inflammatory Bowel Disease.

Science.gov (United States)

Tkacz, Joseph; Brady, Brenna L; Meyer, Roxanne; Lofland, Jennifer H; Ruetsch, Charles; Coelho-Prabhu, Nayantara

2015-11-01

Inflammatory bowel disease (IBD) is a chronic relapsing disease characterized by activation of the mucosal immune system and inflammation of the gastrointestinal tract. Management of IBD places a significant burden on the health care system because of the complexity of treatment, variability in patient outcomes, and chronic nature of the disease.  To investigate the American Gastroenterological Association (AGA) and Crohn's and Colitis Foundation of America's (CCFA) quality measurement sets in a sample of IBD patients. Fourteen quality measures were restated for application to a claims database and calculated using Optum Clinformatics DataMart database. Selected measures were calculated over calendar year 2011. Performance measures ranged from 0.4% for AGA measure 9, prophylaxis for venous thromboembolism, to 66.9% for AGA measure 8, testing for Clostridium difficile. CCFA outcome measures ranged from 0.6% qualifying for CCFA O10, report of fecal incontinence, to 32.9% for CCFA O1, prednisone usage. In addition to Clostridium difficile testing, the use of appropriate corticosteroid-sparing therapy (51.1%) and testing for latent tuberculosis before initiating anti-tumor necrosis factor therapy (45.0%) were the highest achieved measures. This is the first examination of IBD quality measures using administrative claims. Rates of achievement across measures were variable and likely affected by the ability to calculate certain measures with claims data. Future studies should further examine measurement of IBD quality indicators in claims data to assess the validity of claims-based analyses and to ascertain whether measure attainment translates into better overall health or IBD-related outcomes.

Lot quality assurance sampling (LQAS) for monitoring a leprosy elimination program.

Science.gov (United States)

Gupte, M D; Narasimhamurthy, B

1999-06-01

In a statistical sense, prevalences of leprosy in different geographical areas can be called very low or rare. Conventional survey methods to monitor leprosy control programs, therefore, need large sample sizes, are expensive, and are time-consuming. Further, with the lowering of prevalence to the near-desired target level, 1 case per 10,000 population at national or subnational levels, the program administrator's concern will be shifted to smaller areas, e.g., districts, for assessment and, if needed, for necessary interventions. In this paper, Lot Quality Assurance Sampling (LQAS), a quality control tool in industry, is proposed to identify districts/regions having a prevalence of leprosy at or above a certain target level, e.g., 1 in 10,000. This technique can also be considered for identifying districts/regions at or below the target level of 1 per 10,000, i.e., areas where the elimination level is attained. For simulating various situations and strategies, a hypothetical computerized population of 10 million persons was created. This population mimics the actual population in terms of the empirical information on rural/urban distributions and the distribution of households by size for the state of Tamil Nadu, India. Various levels with respect to leprosy prevalence are created using this population. The distribution of the number of cases in the population was expected to follow the Poisson process, and this was also confirmed by examination. Sample sizes and corresponding critical values were computed using Poisson approximation. Initially, villages/towns are selected from the population and from each selected village/town households are selected using systematic sampling. Households instead of individuals are used as sampling units. This sampling procedure was simulated 1000 times in the computer from the base population. The results in four different prevalence situations meet the required limits of Type I error of 5% and 90% Power. It is concluded that

Quality Control Samples for the Radiological Determination of Tritium in Urine Samples

International Nuclear Information System (INIS)

Ost'pezuk, P.; Froning, M.; Laumen, S.; Richert, I.; Hill, P.

2004-01-01

The radioactive decay product of tritium is a low energy beta that cannot penetrate the outer dead layer of human skin. Therefore , the main hazard associated with tritium is internal exposure. In addition, due to the relatively long half life and short biological half life, tritium must be ingested in large amounts to pose a significant health risk. On the other hand, the internal exposure should be kept as low as practical. For incorporation monitoring of professional radiation workers the quality control is of utmost importance. In the Research Centre Juelich GmbH (FZJ) a considerable fraction of monitoring by excretion analysis relates to the isotope Tritium. Usually an aliquot of an urine sample is mixed with a liquid scintillator and measured in a liquid scintillation counter. Quality control samples in the form of three kind of internal reference samples (blank, reference samples with low activity and reference sample with elevated activity) were prepared from a mixed, Tritium (free) urine samples. 1 ml of these samples were pipetted into a liquid scintillation vial. In the part of theses vials a known amounts of Tritium were added. All these samples were stored at 20 degrees. Based on long term use of all these reference samples it was possible to construct appropriate control charts with the upper and lower alarm limits. Daily use of these reference samples decrease significantly the risk for false results in original urine with no significant increase of the determination time. (Author) 2 refs

Design and methods of the Pacific Northwest Stream Quality Assessment (PNSQA), 2015

Science.gov (United States)

Sheibley, Rich W.; Morace, Jennifer L.; Journey, Celeste A.; Van Metre, Peter C.; Bell, Amanda H.; Nakagaki, Naomi; Button, Daniel T.; Qi, Sharon L.

2017-08-25

In 2015, the U.S. Geological Survey (USGS) National Water-Quality Assessment (NAWQA) project conducted the Pacific Northwest Stream Quality Assessment (PNSQA) to investigate stream quality across the western part of the Pacific Northwest. The goal of the PNSQA was to assess the health of streams in the region by characterizing multiple water-quality factors that are stressors to in-stream aquatic life and by evaluating the relation between these stressors and the condition of biological communities. The effects of urbanization and agriculture on stream quality for the Puget Lowland and Willamette Valley Level III Ecoregions were the focus of this regional study. Findings will help inform the public and policymakers about human and environmental factors that are the most critical in affecting stream quality and, thus, provide insights into possible strategies to protect or improve the health of streams in the region.Land-use data were used in the study to identify and select sites within the region that ranged in levels of urban and agricultural development. A total of 88 sites were selected across the region—69 were on streams that explicitly spanned a range of urban land use in their watersheds, 8 were on streams in agricultural watersheds, and 11 were reference sites with little or no development in their watersheds. Depending on the type of land use, sites were sampled for contaminants, nutrients, and sediment for either a 4- or 10-week period during April, May, and June 2015. This water-quality “index period” was immediately followed with an ecological survey of all sites that included stream habitat, benthic algae, benthic macroinvertebrates, and fish. Additionally, streambed sediment was collected during the ecological survey for analysis of sediment chemistry and toxicity testing.This report provides a detailed description of the specific study components and methods of the PNSQA, including (1) surveys of stream habitat and aquatic biota, (2) discrete

Assessment of sleep quality in bipolar euthymic patients.

Science.gov (United States)

Keskin, Necla; Tamam, Lut; Ozpoyraz, Nurgul

2018-01-01

Sleep quality is affected in bipolar disorder even in euthymic episodes. The aim of this study was to assess sleep quality in bipolar euthymic patients, determine related clinical characteristics and evaluate its effects on functionality. A total of 122 outpatients were included. Scales were used to confirm that patients were euthymic. Mini Mental Test was performed to exclude patients with a diagnosis of dementia. A data form for socio-demographic features and clinical characteristics of bipolar disorder have been completed. SCID-I and SCID II were used. The general features of sleep were investigated by General Sleep Questionnaire. All patients completed Pittsburgh Sleep Quality Index, Epworth Sleepiness Scale and Bipolar Disorder Functioning Questionnaire. 56.5% of our sample had poor sleep quality. Patients with poor sleep had a longer time to fall asleep and more frequent waking after sleep onset. Caffeine use and smoking, history of suicide attempts, seasonality, comorbidity of lifetime anxiety, somatoform and impulse control disorders, using antidepressant medication and administration of electroconvulsive therapy were significantly higher; emotional and intellectual functioning, household relations, taking initiative, self-sufficiency and total functionality were lower in bipolar patients with poor sleep quality (p<0.05). The strongest predictor of sleep quality problem was seasonality, recording an odds ratio of 3.91. Sleep quality is closely related with clinical features of bipolar disorder. Sleep quality is affected negatively in euthymic episodes of bipolar disorder and poor sleep quality cause loss in functionality. Assessment of sleep disturbances routinely in psychiatric interviews and dealing with sleep problems regardless mood episodes may improve sleep quality, thereby functionality and quality of life. Copyright © 2017 Elsevier Inc. All rights reserved.

Cluster analysis and quality assessment of logged water at an irrigation project, eastern Saudi Arabia.

Science.gov (United States)

Hussain, Mahbub; Ahmed, Syed Munaf; Abderrahman, Walid

2008-01-01

A multivariate statistical technique, cluster analysis, was used to assess the logged surface water quality at an irrigation project at Al-Fadhley, Eastern Province, Saudi Arabia. The principal idea behind using the technique was to utilize all available hydrochemical variables in the quality assessment including trace elements and other ions which are not considered in conventional techniques for water quality assessments like Stiff and Piper diagrams. Furthermore, the area belongs to an irrigation project where water contamination associated with the use of fertilizers, insecticides and pesticides is expected. This quality assessment study was carried out on a total of 34 surface/logged water samples. To gain a greater insight in terms of the seasonal variation of water quality, 17 samples were collected from both summer and winter seasons. The collected samples were analyzed for a total of 23 water quality parameters including pH, TDS, conductivity, alkalinity, sulfate, chloride, bicarbonate, nitrate, phosphate, bromide, fluoride, calcium, magnesium, sodium, potassium, arsenic, boron, copper, cobalt, iron, lithium, manganese, molybdenum, nickel, selenium, mercury and zinc. Cluster analysis in both Q and R modes was used. Q-mode analysis resulted in three distinct water types for both the summer and winter seasons. Q-mode analysis also showed the spatial as well as temporal variation in water quality. R-mode cluster analysis led to the conclusion that there are two major sources of contamination for the surface/shallow groundwater in the area: fertilizers, micronutrients, pesticides, and insecticides used in agricultural activities, and non-point natural sources.

SPIDIA-RNA: second external quality assessment for the pre-analytical phase of blood samples used for RNA based analyses.

Directory of Open Access Journals (Sweden)

Francesca Malentacchi

Full Text Available One purpose of the EC funded project, SPIDIA, is to develop evidence-based quality guidelines for the pre-analytical handling of blood samples for RNA molecular testing. To this end, two pan-European External Quality Assessments (EQAs were implemented. Here we report the results of the second SPIDIA-RNA EQA. This second study included modifications in the protocol related to the blood collection process, the shipping conditions and pre-analytical specimen handling for participants. Participating laboratories received two identical proficiency blood specimens collected in tubes with or without an RNA stabilizer. For pre-defined specimen storage times and temperatures, laboratories were asked to perform RNA extraction from whole blood according to their usual procedure and to return extracted RNA to the SPIDIA facility for further analysis. These RNA samples were evaluated for purity, yield, integrity, stability, presence of interfering substances, and gene expression levels for the validated markers of RNA stability: FOS, IL1B, IL8, GAPDH, FOSB and TNFRSF10c. Analysis of the gene expression results of FOS, IL8, FOSB, and TNFRSF10c, however, indicated that the levels of these transcripts were significantly affected by blood collection tube type and storage temperature. These results demonstrated that only blood collection tubes containing a cellular RNA stabilizer allowed reliable gene expression analysis within 48 h from blood collection for all the genes investigated. The results of these two EQAs have been proposed for use in the development of a Technical Specification by the European Committee for Standardization.

Attention modeling for video quality assessment

DEFF Research Database (Denmark)

You, Junyong; Korhonen, Jari; Perkis, Andrew

2010-01-01

averaged spatiotemporal pooling. The local quality is derived from visual attention modeling and quality variations over frames. Saliency, motion, and contrast information are taken into account in modeling visual attention, which is then integrated into IQMs to calculate the local quality of a video frame...... average between the global quality and the local quality. Experimental results demonstrate that the combination of the global quality and local quality outperforms both sole global quality and local quality, as well as other quality models, in video quality assessment. In addition, the proposed video...... quality modeling algorithm can improve the performance of image quality metrics on video quality assessment compared to the normal averaged spatiotemporal pooling scheme....

Ground-water-quality assessment of the Central Oklahoma aquifer, Oklahoma; hydrologic, water-quality, and quality-assurance data 1987-90

Science.gov (United States)

Ferree, D.M.; Christenson, S.C.; Rea, A.H.; Mesander, B.A.

1992-01-01

This report presents data collected from 202 wells between June 1987 and September 1990 as part of the Central Oklahoma aquifer pilot study of the National Water-Quality Assessment Program. The report describes the sampling networks, the sampling procedures, and the results of the ground-water quality and quality-assurance sample analyses. The data tables consist of information about the wells sampled and the results of the chemical analyses of ground water and quality-assurance sampling. Chemical analyses of ground-water samples in four sampling networks are presented: A geochemical network, a low-density survey bedrock network, a low-density survey alluvium and terrace deposits network, and a targeted urban network. The analyses generally included physical properties, major ions, nutrients, trace substances, radionuclides, and organic constituents. The chemical analyses of the ground-water samples are presented in five tables: (1) Physical properties and concentrations of major ions, nutrients, and trace substances; (2) concentrations of radionuclides and radioactivities; (3) carbon isotope ratios and delta values (d-values) of selected isotopes; (4) concentrations of organic constituents; and (5) organic constituents not reported in ground-water samples. The quality of the ground water sampled varied substantially. The sum of constituents (dissolved solids) concentrations ranged from 71 to 5,610 milligrams per liter, with 38 percent of the wells sampled exceeding the Secondary Maximum Contaminant Level of 500 milligrams per liter established under the Safe Drinking Water Act. Values of pH ranged from 5.7 to 9.2 units with 20 percent of the wells outside the Secondary Maximum Contaminant Level of 6.5 to 8.5 units. Nitrite plus nitrate concentrations ranged from less than 0.1 to 85 milligrams per liter with 8 percent of the wells exceeding the proposed Maximum Contaminant Level of 10 milligrams per liter. Concentrations of trace substances were highly variable

Environmental quality assessment of Upper Birim River (Ghana)

International Nuclear Information System (INIS)

Asmah, M. H.; Hodgson, I. O. A.; Cobbina, S. J.; Ablordey, A. A.

2013-01-01

The communities along the Upper Birim River use the water resource for domestic and agricultural purposes, and the environmental quality of the river was assessed to determine the level of pollution and associated health risk from consumption and direct contact with the water. The water quality was assessed by the physico-chemical and bacteriological quality parameters. In addition, the impacts of land use activities along the river were also evaluated. Water samples were collected from 6 locations from November 2010 to January 2011 (dry season), and March to May 2011 (wet season). While the mean values of the physico-chemical parameters were within the Ghana Standards Authority (GSA) safety limits for drinking water, the levels of Fe (33.56 ± 31.94 mg/L), As (0.052± 0.088 mg/L) and Mn (4.01± 4.42 mg/L) were higher than the recommended GSA limits. The faecal contaminations were high, as the mean total coliforms, mean faecal coliforms and the level of faecal streptococci were respectively 1925± 708 cfu/100 ml, 1073±900 cfu/100 mL and 16±9 cfu/100 ml. The water quality index (WQI) of 71.79 for the Birim River indicated that most uses of the water were protected, but a few might be threatened or impaired. Hazard quotients determined for Hg, As and Ag were less than 1 at all sampling stations, implying low health risk. Provision of adequate sanitary facilities, enforcement of environmental regulations and introduction of livelihood diversification programmes would safeguard the integrity of the River from adverse anthropogenic activities. (au)

Visual signal quality assessment quality of experience (QOE)

CERN Document Server

Ma, Lin; Lin, Weisi; Ngan, King

2015-01-01

This book provides comprehensive coverage of the latest trends/advances in subjective and objective quality evaluation for traditional visual signals, such as 2D images and video, as well as the most recent challenges for the field of multimedia quality assessment and processing, such as mobile video and social media. Readers will learn how to ensure the highest storage/delivery/ transmission quality of visual content (including image, video, graphics, animation, etc.) from the server to the consumer, under resource constraints, such as computation, bandwidth, storage space, battery life, etc.    Provides an overview of quality assessment for traditional visual signals; Covers newly emerged visual signals such as social media, 3D image/video, mobile video, high dynamic range (HDR) images, graphics/animation, etc., which demand better quality of experience (QoE); Helps readers to develop better quality metrics and processing methods for newly emerged visual signals; Enables testing, optimizing, benchmarking...

An approach based on HPLC-fingerprint and chemometrics to quality consistency evaluation of Matricaria chamomilla L. commercial samples

Directory of Open Access Journals (Sweden)

Agnieszka Viapiana

2016-10-01

Full Text Available Chamomile has been used as an herbal medication since ancient times and is still popular because it contains various bioactive phytochemicals that could provide therapeutic effects. In this study, a simple and reliable HPLC method was developed to evaluate the quality consistency of nineteen chamomile samples through establishing a chromatographic fingerprint, quantification of phenolic compounds and determination of antioxidant activity. For fingerprint analysis, 12 peaks were selected as the common peaks to evaluate the similarities of commercial samples of chamomile obtained from different manufacturers. A similarity analysis was performed to assess the similarity/dissimilarity of chamomile samples where values varied from 0.868 to 0.990 what indicating that samples from different manufacturers were consistent. Additionally, simultaneous quantification of five phenolic acids (gallic, caffeic, syringic, p-coumaric, ferulic and four flavonoids (rutin, myricetin, quercetin and keampferol was performed to interpret the quality consistency. In quantitative analysis, the nine individual phenolic compounds showed good regression (r > 0.9975. Inter- and intra-day precisions for all analysed compounds expressed as relative standard deviation (CV ranged from 0.05% to 3.12%. Since flavonoids and other polyphenols are commonly recognised as natural antioxidants, the antioxidant activity of chamomile samples was evaluated using 1,1-diphenyl-2-picrylhydrazyl (DPPH radical scavenging activity and ferric reducing/antioxidant power (FRAP assay. Correlation analysis was used to assess the relationship between antioxidant activity and phenolic composition, and multivariate analysis (PCA and HCA were applied to distinguish chamomile samples. Results shown in the study indicate high similarity of chamomile samples among them, widely spread in the market and commonly used by people as infusions or teas, as well as that there were no statistically significant

An Approach Based on HPLC-Fingerprint and Chemometrics to Quality Consistency Evaluation of Matricaria chamomilla L. Commercial Samples

Science.gov (United States)

Viapiana, Agnieszka; Struck-Lewicka, Wiktoria; Konieczynski, Pawel; Wesolowski, Marek; Kaliszan, Roman

2016-01-01

Chamomile has been used as an herbal medication since ancient times and is still popular because it contains various bioactive phytochemicals that could provide therapeutic effects. In this study, a simple and reliable HPLC method was developed to evaluate the quality consistency of nineteen chamomile samples through establishing a chromatographic fingerprint, quantification of phenolic compounds and determination of antioxidant activity. For fingerprint analysis, 12 peaks were selected as the common peaks to evaluate the similarities of commercial samples of chamomile obtained from different manufacturers. A similarity analysis was performed to assess the similarity/dissimilarity of chamomile samples where values varied from 0.868 to 0.990 what indicating that samples from different manufacturers were consistent. Additionally, simultaneous quantification of five phenolic acids (gallic, caffeic, syringic, p-coumaric, ferulic) and four flavonoids (rutin, myricetin, quercetin and keampferol) was performed to interpret the quality consistency. In quantitative analysis, the nine individual phenolic compounds showed good regression (r > 0.9975). Inter- and intra-day precisions for all analyzed compounds expressed as relative standard deviation (CV) ranged from 0.05% to 3.12%. Since flavonoids and other polyphenols are commonly recognized as natural antioxidants, the antioxidant activity of chamomile samples was evaluated using 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and ferric reducing/antioxidant power (FRAP) assay. Correlation analysis was used to assess the relationship between antioxidant activity and phenolic composition, and multivariate analysis (PCA and HCA) were applied to distinguish chamomile samples. Results shown in the study indicate high similarity of chamomile samples among them, widely spread in the market and commonly used by people as infusions or teas, as well as that there were no statistically significant differences among

The use of a lot quality assurance sampling methodology to assess and manage primary health interventions in conflict-affected West Darfur, Sudan.

Science.gov (United States)

Pham, Kiemanh; Sharpe, Emily Chambers; Weiss, William M; Vu, Alexander

2016-01-01

Organizations working in conflict-affected areas have a need to monitor and evaluate their programs, however this is often difficult due to the logistical challenges of conflict areas. Lot quality assurance sampling may be a suitable method of assessing programs in these situations. We conducted a secondary data analysis of information collected during Medair's routine program management functions. Medair's service area in West Darfur, Sudan was divided into seven supervisory areas. Using the available population information, a sampling frame was developed and interviews were conducted from randomly selected caretakers of children in each supervisory area every six months over 19 months. A survey instrument with questions related to key indicators for immunizations and maternal, newborn, and child health was used for the interviews. Based on Medair's goals for each indicator, decision rules were calculated for the indicators; these decision rules determined which supervisory areas and indicators performed adequately in each assessment period. Pearson's chi-squared tests, adjusted for the survey design using STATA "svy: tab" commands, were used to detect overall differences in coverage in this analysis. The coverage of tetanus toxoid vaccination among pregnant women increased from 47.2 to 69.7 % ( p value = 0.046), and births attended by a skilled health professional increased from 35.7 to 52.7 % ( p value = 0.025) from the first to last assessment periods. Measles vaccinations declined from 72.0 to 54.1 % ( p value = 0.046). The estimated coverage for the proportion of women receiving a postpartum dose of vitamin A (54.7 to 61.3 %, p value = 0.44); pregnant women receiving a clean delivery kit (54.6 to 47.1 %, p value = 0.49); and pentavalent vaccinations (49.7 to 42.1 %, p value = 0.28) did not significantly change. Lot quality assurance sampling was a feasible method for Medair staff to evaluate and optimize primary health programs

Report on the NAT-9 quality control exercise on uranium isotopes in two soil samples

International Nuclear Information System (INIS)

Bleise, Andreas

2001-04-01

The International Atomic Energy Agency (IAEA) section of Nutritional and Health related Environmental Studies (NAHRES) organized a quality control study for laboratories analysing samples from the UNEP field mission to Kosovo. Quality control was the major responsibility of the IAEA in the UN field assessment team. The NAT-9 quality control study consists of two soil materials from the IAEA Laboratories in Seibersdorf. The scope of this exercise was to determine the content of the uranium isotopes U-234, U-235 and U-238. The IAEA did not provide specific instructions, the participants were encouraged to apply their established analytical procedures to the samples. Five laboratories were invited to participate, four laboratories submitted results. For each soil sample 10 laboratory mean values were reported, using ICP-MS (3 laboratories) and α-spectrometry (1 laboratory). The participating laboratories were capable to distinguish the different uranium isotopes. All laboratories obtained the natural uranium ratio between U-235 and U-238. However, the results highlight a particular analytical weak spot. Although the methods of measuring the analytical signals are highly dependable, the sample preparation steps, in particular the sample dissolution procedure, appears to be lacking total quality control and has contributed to the deviations from the reported target values. One laboratory has documented evidence that extensive and well-controlled digestion methods can yield measurement results close to the target values. (author)

Higher Education Quality Assessment Model: Towards Achieving Educational Quality Standard

Science.gov (United States)

Noaman, Amin Y.; Ragab, Abdul Hamid M.; Madbouly, Ayman I.; Khedra, Ahmed M.; Fayoumi, Ayman G.

2017-01-01

This paper presents a developed higher education quality assessment model (HEQAM) that can be applied for enhancement of university services. This is because there is no universal unified quality standard model that can be used to assess the quality criteria of higher education institutes. The analytical hierarchy process is used to identify the…

Quality assessment of some brands of vitamin C (ascorbic acid ...

African Journals Online (AJOL)

The quality of some brands of vitamin C tablets marketed in the city of Uyo, Nigeria was assessed. All the ten samples passed the uniformity of weight and disintegration time tests as specified in the British Pharmacopoeia and. United States Pharmacopoeia for effervescent, uncoated, dispersible tablets. However, the ...

Semi-annual report of the Department of Energy, Office of Environmental Management, Quality Assessment Program

Energy Technology Data Exchange (ETDEWEB)

Greenlaw, P.D.; Minick, S.K.

1998-07-01

This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML`s results and are reported back to the participating contractors 30 days later. This report presents the results from the analysis of the 48th set of environmental quality assessment samples (QAP XLVIII) that were received on or before June 1, 1998.

Semi-annual report of the Department of Energy, Office of Environmental Management, Quality Assessment Program

International Nuclear Information System (INIS)

Greenlaw, P.D.; Minick, S.K.

1998-01-01

This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML's results and are reported back to the participating contractors 30 days later. This report presents the results from the analysis of the 48th set of environmental quality assessment samples (QAP XLVIII) that were received on or before June 1, 1998

Assessment of air quality in Haora River basin using fuzzy multiple-attribute decision making techniques.

Science.gov (United States)

Singh, Ajit Pratap; Chakrabarti, Sumanta; Kumar, Sumit; Singh, Anjaney

2017-08-01

This paper deals with assessment of air quality in Haora River basin using two techniques. Initially, air quality indices were evaluated using a modified EPA method. The indices were also evaluated using a fuzzy comprehensive assessment (FCA) method. The results obtained from the fuzzy comprehensive assessment method were compared to that obtained from the modified EPA method. To illustrate the applicability of the methodology proposed herein, a case study has been presented. Air samples have been collected at 10 sampling sites located along Haora River. Six important air pollutants, namely, carbon monoxide, sulfur dioxide, nitrogen dioxide, suspended particulate matter (SPM), PM 10 , and lead, were monitored continuously, and air quality maps were generated on the GIS platform. Comparison of the methodologies has clearly highlighted superiority and robustness of the fuzzy comprehensive assessment method in determining air quality indices under study. It has effectively addressed the inherent uncertainties involved in the evaluation, modeling, and interpretation of sampling data, which was beyond the scope of the traditional weighted approaches employed otherwise. The FCA method is robust and prepares a credible platform of air quality evaluation and identification, in face of the uncertainties that remain eclipsed in the traditional approaches like the modified EPA method. The insights gained through the present study are believed to be of pivotal significance in guiding the development and implementation of effective environmental remedial action plans in the study area.

National Coastal Condition Assessment (NCCA) Sampling Areas Map, Hawaiian Islands Shoreline, 2015, US EPA Region 9

Data.gov (United States)

U.S. Environmental Protection Agency — The National Coastal Condition Assessment (NCCA) is a national coastal monitoring program with rigorous quality assurance protocols and standardized sampling...

Surface sediment quality relative to port activities: A contaminant-spectrum assessment.

Science.gov (United States)

Yu, Shen; Hong, Bing; Ma, Jun; Chen, Yongshan; Xi, Xiuping; Gao, Jingbo; Hu, Xiuqin; Xu, Xiangrong; Sun, Yuxin

2017-10-15

Ports are facing increasing environmental concerns with their importance to the global economy. Numerous studies indicated sediment quality deterioration in ports; however, the deterioration is not discriminated for each port activity. This study investigated a spectrum of contaminants (metals and organic pollutants) in surface sediments at 20 sampling points in Port Ningbo, China, one of the top five world ports by volume. The spectrum of contaminants (metals and organic pollutants) was quantified following marine sediment quality guidelines of China and USA and surface sediment quality was assessed according to thresholds of the two guidelines. Coupling a categorical matrix of port activities with the matrix of sedimentary contaminants revealed that contaminants were highly associated with the port operations. Ship repair posed a severe chemical risk to sediment. Operations of crude oil and coal loadings were two top activities related to organic pollutants in sediments while port operations of ore and container loadings discharged metals. Among the 20 sampling points, Cu, Zn, Pb, and DDT and its metabolites were the priority contaminants influencing sediment quality. Overall, surface sediments in Port Ningbo had relatively low environmental risks but ship repair is an environmental concern that must be addressed. This study provides a practical approach for port activity-related quality assessment of surface sediments in ports that could be applicable in many world sites. Copyright © 2017 Elsevier B.V. All rights reserved.

Water-quality assessment of part of the Upper Mississippi River Basin, Minnesota and Wisconsin - Ground-water quality in three different land-use areas, 1996-98

Science.gov (United States)

Fong, Alison L.

2000-01-01

The surficial sand and gravel aquifer is susceptible to effects from land-use in the Upper Mississippi River Basin study unit of the National Water-Quality Assessment (NAWQA) Program. The purpose of this report is to describe the ground-water quality and the assessment of how different land-uses affect the shallow ground-water quality in the surficial sand and gravel aquifer. Ground-water quality was compared in three different land-use areas; an urban residential/commercial area on the edge of the Anoka Sand Plain in a portion of the Twin Cities metropolitan area (urban study), an intensive agricultural area in the Anoka Sand Plain (agricultural study), and a forested area in the Bemidji-Bagley Sand Plain (forested study). Ground water was sampled and analyzed for about 200 constituents, including physical parameters, major ions, selected trace elements, nutrients, dissolved organic carbon, selected pesticides, selected volatile organic compounds (VOCs), and tritium. The urban study wells were sampled during June and July 1996. The agricultural study wells were sampled during May and September 1998. The forested study wells were sampled during June 1998.

Assessing product image quality for online shopping

Science.gov (United States)

Goswami, Anjan; Chung, Sung H.; Chittar, Naren; Islam, Atiq

2012-01-01

Assessing product-image quality is important in the context of online shopping. A high quality image that conveys more information about a product can boost the buyer's confidence and can get more attention. However, the notion of image quality for product-images is not the same as that in other domains. The perception of quality of product-images depends not only on various photographic quality features but also on various high level features such as clarity of the foreground or goodness of the background etc. In this paper, we define a notion of product-image quality based on various such features. We conduct a crowd-sourced experiment to collect user judgments on thousands of eBay's images. We formulate a multi-class classification problem for modeling image quality by classifying images into good, fair and poor quality based on the guided perceptual notions from the judges. We also conduct experiments with regression using average crowd-sourced human judgments as target. We compute a pseudo-regression score with expected average of predicted classes and also compute a score from the regression technique. We design many experiments with various sampling and voting schemes with crowd-sourced data and construct various experimental image quality models. Most of our models have reasonable accuracies (greater or equal to 70%) on test data set. We observe that our computed image quality score has a high (0.66) rank correlation with average votes from the crowd sourced human judgments.

Assessment of Groundwater quality in Krishnagiri and Vellore Districts in Tamil Nadu, India

Science.gov (United States)

Shanmugasundharam, A.; Kalpana, G.; Mahapatra, S. R.; Sudharson, E. R.; Jayaprakash, M.

2017-07-01

Groundwater quality is important as it is the main factor determining its suitability for drinking, domestic, agricultural and industrial purposes. The suitability of groundwater for drinking and irrigation has been assessed in north and eastern part of Krishnagiri district, South-western part of Vellore district and contiguous with Andhra Pradesh states, India. A total of 31 groundwater samples were collected in the study area. The groundwater quality assessment has been carried out by evaluating the physicochemical parameters such as pH, EC, TDS, {HCO}3^{ - }, Cl-, {SO}4^{2 - }, Ca2+, Mg2+, Na+ and K+. The dominant cations are in the order of Na+ > K+ > Ca2+ > Mg2+ while the dominant anions have the trends of Cl- > {HCO}3^{ - } > {SO}4^{2 - } > CO3. The quality of the water is evaluated using Wilcox diagram and the results reveals that most of the samples are found to be suitable for irrigation. Based on these parameters, groundwater has been assessed in favor of its suitability for drinking and irrigation purpose.

Assessment of water quality from water harvesting using small farm reservoir for irrigation

Science.gov (United States)

Dewi, W. S.; Komariah; Samsuri, I. Y.; Senge, M.

2018-03-01

This study aims to assess the quality of rainfall-runoff water harvesting using small farm reservoir (SFR) for irrigation. Water quality assessment criteria based on RI Government Regulation number 82 the year 2001 on Water Quality Management and Pollution Control, and FAO Irrigation Water Quality Guidelines 1985. The experiment was conducted in the dry land of Wonosari Village, Gondangrejo District, Karanganyar Regency. SFR size was 10 m x 3 m x 2 m. Water quality measurements are done every week, ten times. Water samples were taken at 6 points, namely: distance of 2.5 m, 5 m, and 7.5 m from the inlet, at depth 25 cm and 175 cm from surface water. In each sampling point replicated three times. Water quality parameters include dissolved oxygen (DO), Turbidity (TSS), water pH, Nitrate (NO3), and Phosphate. The results show that water harvesting that collected in SFR meets both standards quality used, so the water is feasible for agricultural irrigation. The average value of harvested water was DO 2.6 mg/l, TSS 62.7 mg/l, pH 6.6, P 5.3 mg/l and NO3 0.16 mg/l. Rainfall-runoff water harvesting using SFR prospectus for increasing save water availability for irrigation.

Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

OpenAIRE

Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

2015-01-01

Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

Assessment of quality of drinking water in Amasaman, Accra (Ghana)

International Nuclear Information System (INIS)

Quarcoo, G.; Hodgson, I. O. A.; Ampofo, J. A.; Cobbina, S. J.; Koku, J. E.

2014-01-01

The physico-chemical and microbial quality attributes of untreated water samples from hand dug wells and treated water delivered by tankers (mobile services) were assessed to determine the susceptibility of Amasaman community to water borne diseases. The physico-chemical parameters of all the water sources for domestic use were within the World Health Organization (WHO) drinking water guidelines and Ghana Standards (GS), with the exception of turbidity and colour which showed higher values for the well waters. With respect to the microbial quality, the waters from the hand-dug wells and tanker services showed presence of both total and faecal coliforms, at levels higher than WHO and GS values of zero counts per 100 mL for drinking water. The poor microbial quality (presence of coliform bacteria) of all the water samples suggested susceptibility and exposure of the community to waterborne diseases on continuously drinking the available water. (au)

Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool.

Science.gov (United States)

Ho, Robin S T; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel Y S; Chung, Vincent C H

2015-01-08

Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. To assess the methodological quality of MAs on COPD treatments. A cross-sectional study on MAs of COPD trials. MAs published during 2000-2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods.

Estimation after classification using lot quality assurance sampling: corrections for curtailed sampling with application to evaluating polio vaccination campaigns.

Science.gov (United States)

Olives, Casey; Valadez, Joseph J; Pagano, Marcello

2014-03-01

To assess the bias incurred when curtailment of Lot Quality Assurance Sampling (LQAS) is ignored, to present unbiased estimators, to consider the impact of cluster sampling by simulation and to apply our method to published polio immunization data from Nigeria. We present estimators of coverage when using two kinds of curtailed LQAS strategies: semicurtailed and curtailed. We study the proposed estimators with independent and clustered data using three field-tested LQAS designs for assessing polio vaccination coverage, with samples of size 60 and decision rules of 9, 21 and 33, and compare them to biased maximum likelihood estimators. Lastly, we present estimates of polio vaccination coverage from previously published data in 20 local government authorities (LGAs) from five Nigerian states. Simulations illustrate substantial bias if one ignores the curtailed sampling design. Proposed estimators show no bias. Clustering does not affect the bias of these estimators. Across simulations, standard errors show signs of inflation as clustering increases. Neither sampling strategy nor LQAS design influences estimates of polio vaccination coverage in 20 Nigerian LGAs. When coverage is low, semicurtailed LQAS strategies considerably reduces the sample size required to make a decision. Curtailed LQAS designs further reduce the sample size when coverage is high. Results presented dispel the misconception that curtailed LQAS data are unsuitable for estimation. These findings augment the utility of LQAS as a tool for monitoring vaccination efforts by demonstrating that unbiased estimation using curtailed designs is not only possible but these designs also reduce the sample size. © 2014 John Wiley & Sons Ltd.

Proxy Graph: Visual Quality Metrics of Big Graph Sampling.

Science.gov (United States)

Nguyen, Quan Hoang; Hong, Seok-Hee; Eades, Peter; Meidiana, Amyra

2017-06-01

Data sampling has been extensively studied for large scale graph mining. Many analyses and tasks become more efficient when performed on graph samples of much smaller size. The use of proxy objects is common in software engineering for analysis and interaction with heavy objects or systems. In this paper, we coin the term 'proxy graph' and empirically investigate how well a proxy graph visualization can represent a big graph. Our investigation focuses on proxy graphs obtained by sampling; this is one of the most common proxy approaches. Despite the plethora of data sampling studies, this is the first evaluation of sampling in the context of graph visualization. For an objective evaluation, we propose a new family of quality metrics for visual quality of proxy graphs. Our experiments cover popular sampling techniques. Our experimental results lead to guidelines for using sampling-based proxy graphs in visualization.

Anti-malarial drug quality in Lagos and Accra - a comparison of various quality assessments

Directory of Open Access Journals (Sweden)

Bate Roger

2010-06-01

Full Text Available Abstract Background Two major cities in West Africa, Accra, the capital of Ghana, and Lagos, the largest city of Nigeria, have significant problems with substandard pharmaceuticals. Both have actively combated the problem in recent years, particularly by screening products on the market using the Global Pharma Health Fund e.V. Minilab® protocol. Random sampling of medicines from the two cities at least twice over the past 30 months allows a tentative assessment of whether improvements in drug quality have occurred. Since intelligence provided by investigators indicates that some counterfeit producers may be adapting products to pass Minilab tests, the results are compared with those from a Raman spectrometer and discrepancies are discussed. Methods Between mid-2007 and early-2010, samples of anti-malarial drugs were bought covertly from pharmacies in Lagos on three different occasions (October 2007, December 2008, February 2010, and from pharmacies in Accra on two different occasions (October 2007, February 2010. All samples were tested using the Minilab® protocol, which includes disintegration and active ingredient assays as well as visual inspection, and most samples were also tested by Raman spectrometry. Results In Lagos, the failure rate in the 2010 sampling fell to 29% of the 2007 finding using the Minilab® protocol, 53% using Raman spectrometry, and 46% using visual inspection. In Accra, the failure rate in the 2010 sampling fell to 54% of the 2007 finding using the Minilab® protocol, 72% using Raman spectrometry, and 90% using visual inspection. Conclusions The evidence presented shows that drug quality is probably improving in both cities, especially Lagos, since major reductions of failure rates over time occur with all means of assessment. Many more samples failed when examined by Raman spectrometry than by Minilab® protocol. The discrepancy is most likely caused by the two techniques measuring different aspects of the medication

Rapid assessment of Schistosoma mansoni: the validity, applicability and cost-effectiveness of the Lot Quality Assurance Sampling method in Uganda.

Science.gov (United States)

Brooker, Simon; Kabatereine, Narcis B; Myatt, Mark; Russell Stothard, J; Fenwick, Alan

2005-07-01

Rapid and accurate identification of communities at highest risk of morbidity from schistosomiasis is key for sustainable control. Although school questionnaires can effectively and inexpensively identify communities with a high prevalence of Schistosoma haematobium, parasitological screening remains the preferred option for S. mansoni. To help reduce screening costs, we investigated the validity of Lot Quality Assurance Sampling (LQAS) in classifying schools according to categories of S. mansoni prevalence in Uganda, and explored its applicability and cost-effectiveness. First, we evaluated several sampling plans using computer simulation and then field tested one sampling plan in 34 schools in Uganda. Finally, cost-effectiveness of different screening and control strategies (including mass treatment without prior screening) was determined, and sensitivity analysis undertaken to assess the effect of infection levels and treatment costs. In identifying schools with prevalences > or =50%, computer simulations showed that LQAS had high levels of sensitivity and specificity (>90%) at sample sizes LQAS where 15 children were sampled had excellent diagnostic performance (sensitivity: 100%, specificity: 96.4%, positive predictive value: 85.7% and negative predictive value: 92.3%). Screening using LQAS was more cost-effective than mass treating all schools (US$218 vs. US$482/high prevalence school treated). Threshold analysis indicated that parasitological screening and mass treatment would become equivalent for settings where prevalence > or =50% in 75% of schools and for treatment costs of US$0.19 per schoolchild. We conclude that, in Uganda, LQAS provides a rapid, valid and cost-effective method for guiding decision makers in allocating finite resources for the control of schistosomiasis.

Extending cluster Lot Quality Assurance Sampling designs for surveillance programs

OpenAIRE

Hund, Lauren; Pagano, Marcello

2014-01-01

Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance based on the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than ...

Assessment of Quality and Safety of Street-vended Fried West ...

African Journals Online (AJOL)

This study was carried out to assess the quality and safety of street-vended fried West African ilisha (Ilisha africana) from major markets in Ibadan, Oyo State, Nigeria. A total number of 100 fried fish samples obtained from ten major markets in Ibadan, Oyo State, Nigeria were analysed in the laboratory for: proximate ...

Water Quality Assessment and Management

Science.gov (United States)

Overview of Clean Water Act (CWA) restoration framework including; water quality standards, monitoring/assessment, reporting water quality status, TMDL development, TMDL implementation (point & nonpoint source control)

ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Larisa Alexejevna Ismagilova

2016-12-01

Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

Assessment Quality in Tertiary Education: An Integrative Literature Review

OpenAIRE

Gerritsen-van Leeuwenkamp, Karin; Joosten-ten Brinke, Desirée; Kester, Liesbeth

2018-01-01

In tertiary education, inferior assessment quality is a problem that has serious consequences for students, teachers, government, and society. A lack of a clear and overarching conceptualization of assessment quality can cause difficulties in guaranteeing assessment quality in practice. Thus, the aim of this study is to conceptualize assessment quality in tertiary education by providing an overview of the assessment quality criteria, their influences, the evaluation of the assessment quality ...

Form Quality in Rorschach Comprehensive System and R-PAS: Sample of Psychiatric Cases

Directory of Open Access Journals (Sweden)

Latife Yazigi

2016-04-01

Full Text Available Abstract The creation of the Rorschach Performance Assessment System (R-PAS requires research that allows its use in the Brazilian population. The Formal Quality (FQ category is essential both for clinic and research. The aim of this study was to compare form quality variables in Rorschach protocols from psychiatric patients and ratings coded in the Comprehensive System (CS and R-PAS. The sample comprised 206 Rorschach protocols from adult patients in psychiatric treatment, who were also assessed by SCID-I and SCID-II. Most protocols were administered in the CS and recoded according to the R-PAS. The kappa coefficient was calculated, and we compared the means of these variables in both systems. The kappa results varied from almost perfect to substantial consistency for all variables, however, the descriptive statistics confirmed that the R-PAS elicits more FQ Ordinary coding while the CS elicits more FQ minus coding.

Kaolin Quality Prediction from Samples: A Bayesian Network Approach

International Nuclear Information System (INIS)

Rivas, T.; Taboada, J.; Ordonez, C.; Matias, J. M.

2009-01-01

We describe the results of an expert system applied to the evaluation of samples of kaolin for industrial use in paper or ceramic manufacture. Different machine learning techniques - classification trees, support vector machines and Bayesian networks - were applied with the aim of evaluating and comparing their interpretability and prediction capacities. The predictive capacity of these models for the samples analyzed was highly satisfactory, both for ceramic quality and paper quality. However, Bayesian networks generally proved to be the most useful technique for our study, as this approach combines good predictive capacity with excellent interpretability of the kaolin quality structure, as it graphically represents relationships between variables and facilitates what-if analyses.

External Quality Assessment for KRAS Testing Is Needed: Setup of a European Program and Report of the First Joined Regional Quality Assessment Rounds

Science.gov (United States)

Bellon, Ellen; Ligtenberg, Marjolijn J.L.; Tejpar, Sabine; Cox, Karen; de Hertogh, Gert; de Stricker, Karin; Edsjö, Anders; Gorgoulis, Vassilis; Höfler, Gerald; Jung, Andreas; Kotsinas, Athanassios; Laurent-Puig, Pierre; López-Ríos, Fernando; Hansen, Tine Plato; Rouleau, Etienne; Vandenberghe, Peter; van Krieken, Johan J.M.

2011-01-01

The use of epidermal growth factor receptor–targeting antibodies in metastatic colorectal cancer has been restricted to patients with wild-type KRAS tumors by the European Medicines Agency since 2008, based on data showing a lack of efficacy and potential harm in patients with mutant KRAS tumors. In an effort to ensure optimal, uniform, and reliable community-based KRAS testing throughout Europe, a KRAS external quality assessment (EQA) scheme was set up. The first large assessment round included 59 laboratories from eight different European countries. For each country, one regional scheme organizer prepared and distributed the samples for the participants of their own country. The samples included unstained sections of 10 invasive colorectal carcinomas with known KRAS mutation status. The samples were centrally validated by one of two reference laboratories. The laboratories were allowed to use their own preferred method for histological evaluation, DNA isolation, and mutation analysis. In this study, we analyze the setup of the KRAS scheme. We analyzed the advantages and disadvantages of the regional scheme organization by analyzing the outcome of genotyping results, analysis of tumor percentage, and written reports. We conclude that only 70% of laboratories correctly identified the KRAS mutational status in all samples. Both the false-positive and false-negative results observed negatively affect patient care. Reports of the KRAS test results often lacked essential information. We aim to further expand this program to more laboratories to provide a robust estimate of the quality of KRAS testing in Europe, and provide the basis for remedial measures and harmonization. PMID:21441573

Water quality assessment of the rivers in bauxite mining area at ...

African Journals Online (AJOL)

Water quality assessment of the rivers in bauxite mining area at Kuantan Pahang. ... mining area. Water samples were collected at Kuantan River, Riau River, Pinang River and Pandan Rivers. ... All these rivvers were classified into class II based on INWQS and required conventional treatment for water supply purposes.

[Quality of DNA from archival pathological samples of gallbladder cancer].

Science.gov (United States)

Roa, Iván; de Toro, Gonzalo; Sánchez, Tamara; Slater, Jeannie; Ziegler, Anne Marie; Game, Anakaren; Arellano, Leonardo; Schalper, Kurt; de Aretxabala, Xabier

2013-12-01

The quality of the archival samples stored at pathology services could be a limiting factor for molecular biology studies. To determine the quality of DNA extracted from gallbladder cancer samples at different institutions. One hundred ninety four samples coming from five medical centers in Chile, were analyzed. DNA extraction was quantified determining genomic DNA concentration. The integrity of DNA was determined by polymerase chain reaction amplification of different length fragments of a constitutive gene (β-globin products of 110, 268 and 501 base pairs). The mean DNA concentration obtained in 194 gallbladder cancer samples was 48 ± 43.1 ng/µl. In 22% of samples, no amplification was achieved despite obtaining a mean DNA concentration of 58.3 ng/ul. In 81, 67 and 22% of samples, a DNA amplification of at least 110, 268 or 501 base pairs was obtained, respectively. No differences in DNA concentration according to the source of the samples were demonstrated. However, there were marked differences in DNA integrity among participating centers. Samples from public hospitals were of lower quality than those from private clinics. Despite some limitations, in 80% of cases, the integrity of DNA in archival samples from pathology services in our country would allow the use of molecular biology techniques.

Quality Assessment in the Primary care

Directory of Open Access Journals (Sweden)

Muharrem Ak

2013-04-01

Full Text Available -Quality Assessment in the Primary care Dear Editor; I have read the article titled as “Implementation of Rogi Kalyan Samiti (RKS at Primary Health Centre Durvesh” with great interest. Shrivastava et all concluded that assessment mechanism for the achievement of objectives for the suggested RKS model was not successful (1. Hereby I would like to emphasize the importance of quality assessment (QA especially in the era of newly established primary care implementations in our country. Promotion of quality has been fundamental part of primary care health services. Nevertheless variations in quality of care exist even in the developed countries. Accomplishment of quality in the primary care has some barriers like administration and directorial factors, absence of evidence-based medicine practice lack of continuous medical education. Quality of health care is no doubt multifaceted model that covers all components of health structures and processes of care. Quality in the primary care set up includes patient physician relationship, immunization, maternal, adolescent, adult and geriatric health care, referral, non-communicable disease management and prescribing (2. Most countries are recently beginning the implementation of quality assessments in all walks of healthcare. Organizations like European society for quality and safety in family practice (EQuiP endeavor to accomplish quality by collaboration. There are reported developments and experiments related to the methodology, processes and outcomes of quality assessments of health care. Quality assessments will not only contribute the accomplishment of the program / project but also detect the areas where obstacles also exist. In order to speed up the adoption of QA and to circumvent the occurrence of mistakes, health policy makers and family physicians from different parts of the world should share their experiences. Consensus on quality in preventive medicine implementations can help to yield

Summary and evaluation of pesticides in field blanks collected for the National Water-Quality Assessment Program, 1992-95

Science.gov (United States)

Martin, Jeffrey D.; Gilliom, Robert J.; Schertz, Terry L.

1999-01-01

Field blanks are quality-control samples used to assess contamination in environmental water samples. Contamination is the unintentional introduction of a chemical (pesticides in this instance) into an environmental water sample from sources such as inadequately cleaned equipment, dirty hands, dust, rain, or fumes. Contamination causes a positive bias in analytical measurements that may need to be considered in the analysis and interpretation of the environmental data. Estimates of pesticide contamination in environmental water samples collected for the National Water-Quality Assessment (NAWQA) Program are used to qualify, where needed, interpretations of the occurrence and distribution of pesticides in the surface and ground waters of the United States.

Non-human biota dose assessment. Sensitivity analysis and knowledge quality assessment

International Nuclear Information System (INIS)

Smith, K.; Robinson, C.; Jackson, D.; La Cruz, I. de; Zinger, I.; Avila, R.

2010-10-01

This report provides a summary of a programme of work, commissioned within the BIOPROTA collaborative forum, to assess the quantitative and qualitative elements of uncertainty associated with biota dose assessment of potential impacts of long-term releases from geological disposal facilities (GDF). Quantitative and qualitative aspects of uncertainty were determined through sensitivity and knowledge quality assessments, respectively. Both assessments focused on default assessment parameters within the ERICA assessment approach. The sensitivity analysis was conducted within the EIKOS sensitivity analysis software tool and was run in both generic and test case modes. The knowledge quality assessment involved development of a questionnaire around the ERICA assessment approach, which was distributed to a range of experts in the fields of non-human biota dose assessment and radioactive waste disposal assessments. Combined, these assessments enabled critical model features and parameters that are both sensitive (i.e. have a large influence on model output) and of low knowledge quality to be identified for each of the three test cases. The output of this project is intended to provide information on those parameters that may need to be considered in more detail for prospective site-specific biota dose assessments for GDFs. Such information should help users to enhance the quality of their assessments and build greater confidence in the results. (orig.)

Assessing the quality of restored images in optical long-baseline interferometry

Science.gov (United States)

Gomes, Nuno; Garcia, Paulo J. V.; Thiébaut, Éric

2017-03-01

Assessing the quality of aperture synthesis maps is relevant for benchmarking image reconstruction algorithms, for the scientific exploitation of data from optical long-baseline interferometers, and for the design/upgrade of new/existing interferometric imaging facilities. Although metrics have been proposed in these contexts, no systematic study has been conducted on the selection of a robust metric for quality assessment. This article addresses the question: what is the best metric to assess the quality of a reconstructed image? It starts by considering several metrics and selecting a few based on general properties. Then, a variety of image reconstruction cases are considered. The observational scenarios are phase closure and phase referencing at the Very Large Telescope Interferometer (VLTI), for a combination of two, three, four and six telescopes. End-to-end image reconstruction is accomplished with the MIRA software, and several merit functions are put to test. It is found that convolution by an effective point spread function is required for proper image quality assessment. The effective angular resolution of the images is superior to naive expectation based on the maximum frequency sampled by the array. This is due to the prior information used in the aperture synthesis algorithm and to the nature of the objects considered. The ℓ1-norm is the most robust of all considered metrics, because being linear it is less sensitive to image smoothing by high regularization levels. For the cases considered, this metric allows the implementation of automatic quality assessment of reconstructed images, with a performance similar to human selection.

A content validated questionnaire for assessment of self reported venous blood sampling practices.

Science.gov (United States)

Bölenius, Karin; Brulin, Christine; Grankvist, Kjell; Lindkvist, Marie; Söderberg, Johan

2012-01-19

Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

APPLICATION OF LOT QUALITY ASSURANCE SAMPLING FOR ASSESSING DISEASE CONTROL PROGRAMMES - EXAMINATION OF SOME METHODOLOGICAL ISSUES

OpenAIRE

T. R. RAMESH RAO

2011-01-01

Lot Quality Assurance Sampling (LQAS), a statistical tool in industrial setup, has been in use since 1980 for monitoring and evaluation of programs on disease control / immunization status among children / health workers performance in health system. While conducting LQAS in the field, there are occasions, even after due care of design, there are practical and methodological issues to be addressed before it is recommended for implementation and intervention. LQAS is applied under the assumpti...

Assessing the quality of healthcare provided to children.

Science.gov (United States)

Mangione-Smith, R; McGlynn, E A

1998-10-01

pediatric population that can be most affected by variations in the quality of care. Improving the care provided to these children is likely to have the largest impact on quality of life and longevity. The low prevalence of most severe pediatric diseases also makes it difficult to evaluate the effectiveness of new treatment modalities; multi-center trials or long enrollment periods are usually required to obtain a large enough patient sample to conduct the necessary randomized controlled trials or cohort studies. Another challenge encountered when measuring quality of care for children is that, in most cases, they depend on adults to both obtain care and to report on the outcomes of that care. Parents and their children may have different perceptions of what defines health or have different levels of satisfaction with the care they receive. Children, particularly those with special needs, also depend on a broad range of services including the medical system, community intervention programs, social programs, and school-based services. Dependency on these various services adds to the difficulty of measuring and appropriately attributing health outcomes observed in children to a particular service delivery entity. Adolescents also depend on adults for access to some of their care; however, they have special needs related to confidentiality and parent-child information sharing. Adolescents commonly seek care at facilities, such as school-based clinics, that allow them to obtain confidential care. These facilities usually provide out-of-health plan care for these children, which raises special issues related to information availability for quality assessments and for assessing utilization patterns in this population. If the source of poor health outcomes is not known, quality improvement is not possible. The many challenges faced when constructing pediatric (this term will be used to refer to both children and adolescents) quality of care measures have resulted in few of these

Sampling quality assurance guidance in support of EM environmental sampling and analysis activities

International Nuclear Information System (INIS)

1994-05-01

This document introduces quality assurance guidance pertaining to the design and implementation of sampling procedures and processes for collecting environmental data for DOE's Office of EM (Environmental Restoration and Waste Management)

Perceived Quality of Full HD Video - Subjective Quality Assessment

Directory of Open Access Journals (Sweden)

Juraj Bienik

2016-01-01

Full Text Available In recent years, an interest in multimedia services has become a global trend and this trend is still rising. The video quality is a very significant part from the bundle of multimedia services, which leads to a requirement for quality assessment in the video domain. Video quality of a streamed video across IP networks is generally influenced by two factors “transmission link imperfection and efficiency of compression standards. This paper deals with subjective video quality assessment and the impact of the compression standards H.264, H.265 and VP9 on perceived video quality of these compression standards. The evaluation is done for four full HD sequences, the difference of scenes is in the content“ distinction is based on Spatial (SI and Temporal (TI Index of test sequences. Finally, experimental results follow up to 30% bitrate reducing of H.265 and VP9 compared with the reference H.264.

Lot quality assurance sampling for monitoring coverage and quality of a targeted condom social marketing programme in traditional and non-traditional outlets in India

OpenAIRE

Piot, Bram; Mukherjee, Amajit; Navin, Deepa; Krishnan, Nattu; Bhardwaj, Ashish; Sharma, Vivek; Marjara, Pritpal

2010-01-01

Objectives This study reports on the results of a large-scale targeted condom social marketing campaign in and around areas where female sex workers are present. The paper also describes the method that was used for the routine monitoring of condom availability in these sites. Methods The lot quality assurance sampling (LQAS) method was used for the assessment of the geographical coverage and quality of coverage of condoms in target areas in four states and along selected national highways in...

Physicochemical Assessment of Surface and Groundwater Quality of the Greater Chittagong Region of Bangladesh

Directory of Open Access Journals (Sweden)

M. J. Ahmed

2010-12-01

Full Text Available The study was carried out to assess surface and groundwater quality of the greater Chittagong (Chittagong and Cox’s Bazar districts and Chittagong Hill Tracts (Rangamati, Khagrachhari and Bandarban districts of Bangladesh. To study the various physicochemical and microbiological parameters, surface water samples from the Karnafuli, Halda, Sangu, Matamuhuri, Bakkhali, Naf, Kasalong, Chingri and Mayani Rivers, Kaptai Lake and groundwater samples from almost every Upazilas, smaller administrative unit of Bangladesh, were collected and analyzed. The statistical methods of sampling were used for collecting samples. Samples were preserved using suitable preservation methods. Water samples from the freshwater resources were collected from different points and tide conditions and at different seasons for continuous monitoring during the hydrological years 2008-2009. The collected samples were analyzed for the following parameters: pH, electrical conductivity (EC, total dissolved solids (TDS, total suspended solids (TSS, total solids (TS, dissolved oxygen (DO, transparency, acidity, dissolved carbon dioxide, total alkalinity, total hardness, chloride, ammonia-N, hydrogen sulfide, sulphate-S, o-phosphate-P, biochemical oxygen demand (BOD, chemical oxygen demand (COD, nitrate-N, nitrite-N, total nitrite and nitrate-N, arsenic, iron, manganese, copper, nickel, chromium, cadmium, lead, calcium, magnesium, sodium and potassium using the procedure outlined in the standard methods. Average values of maximum physicochemical and microbiological parameters studied for the Karnafuli River were found higher than the World Health Organization (WHO guideline. The maximum water quality parameters of Kaptai Lake and other Rivers of Chittagong region were existed within the permissible limits of WHO guideline. The data showed the water quality slightly differs in pre-monsoon and post-monsoon than monsoon season. The concentration of different constituents of most of

Design, analysis, and interpretation of field quality-control data for water-sampling projects

Science.gov (United States)

Mueller, David K.; Schertz, Terry L.; Martin, Jeffrey D.; Sandstrom, Mark W.

2015-01-01

The process of obtaining and analyzing water samples from the environment includes a number of steps that can affect the reported result. The equipment used to collect and filter samples, the bottles used for specific subsamples, any added preservatives, sample storage in the field, and shipment to the laboratory have the potential to affect how accurately samples represent the environment from which they were collected. During the early 1990s, the U.S. Geological Survey implemented policies to include the routine collection of quality-control samples in order to evaluate these effects and to ensure that water-quality data were adequately representing environmental conditions. Since that time, the U.S. Geological Survey Office of Water Quality has provided training in how to design effective field quality-control sampling programs and how to evaluate the resultant quality-control data. This report documents that training material and provides a reference for methods used to analyze quality-control data.

A systematic review of instruments that assess the implementation of hospital quality management systems.

Science.gov (United States)

Groene, Oliver; Botje, Daan; Suñol, Rosa; Lopez, Maria Andrée; Wagner, Cordula

2013-10-01

Health-care providers invest substantial resources to establish and implement hospital quality management systems. Nevertheless, few tools are available to assess implementation efforts and their effect on quality and safety outcomes. This review aims to (i) identify instruments to assess the implementation of hospital quality management systems, (ii) describe their measurement properties and (iii) assess the effects of quality management on quality improvement and quality of care outcomes. We performed a systematic literature search from 1990 to 2011 in PubMed, CINAHL, EMBASE, Cochrane Library and Web of Science. In addition, we used snowball strategies, screened the reference lists of eligible papers, reviewed grey literature and contacted experts in the field. and data extraction Two reviewers screened eligible papers based on pre-defined inclusion and exclusion criteria and all authors extracted data. Eligible papers are described in terms of general characteristics (settings, type and level of respondents, mode of data collection), methodological properties (sampling strategy, item derivation, conceptualization of quality management, assessment of reliability and validity, scoring) and application/implementation (accounting for context, organizational adaptations, sensitivity to change, deployment and effect size). Eighteen papers were deemed eligible for inclusion. While some common domains emerged in measurement conceptualization, substantial differences in scope persist. The instruments' measurement properties were insufficiently described and only few instruments assessed links between the implementation of quality management systems (QMS) and improvement strategies or outcomes. There is currently no well-established measure to assess the implementation and effectiveness of quality management systems. Future research should address this gap.

Semi-annual report of the Department of Energy, Office of Environmental Management, Quality Assessment Program

International Nuclear Information System (INIS)

Greenlaw, P.D.

1998-01-01

This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML's results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 4 days after the reporting deadline via the Internet at www.eml.doe.gov. This report presents the results from the analysis of the 47th set of environmental quality assessment samples (QAP XLVII) that were received on or before December 1, 1997

Effects of sparse sampling schemes on image quality in low-dose CT

International Nuclear Information System (INIS)

Abbas, Sajid; Lee, Taewon; Cho, Seungryong; Shin, Sukyoung; Lee, Rena

2013-01-01

Purpose: Various scanning methods and image reconstruction algorithms are actively investigated for low-dose computed tomography (CT) that can potentially reduce a health-risk related to radiation dose. Particularly, compressive-sensing (CS) based algorithms have been successfully developed for reconstructing images from sparsely sampled data. Although these algorithms have shown promises in low-dose CT, it has not been studied how sparse sampling schemes affect image quality in CS-based image reconstruction. In this work, the authors present several sparse-sampling schemes for low-dose CT, quantitatively analyze their data property, and compare effects of the sampling schemes on the image quality.Methods: Data properties of several sampling schemes are analyzed with respect to the CS-based image reconstruction using two measures: sampling density and data incoherence. The authors present five different sparse sampling schemes, and simulated those schemes to achieve a targeted dose reduction. Dose reduction factors of about 75% and 87.5%, compared to a conventional scan, were tested. A fully sampled circular cone-beam CT data set was used as a reference, and sparse sampling has been realized numerically based on the CBCT data.Results: It is found that both sampling density and data incoherence affect the image quality in the CS-based reconstruction. Among the sampling schemes the authors investigated, the sparse-view, many-view undersampling (MVUS)-fine, and MVUS-moving cases have shown promising results. These sampling schemes produced images with similar image quality compared to the reference image and their structure similarity index values were higher than 0.92 in the mouse head scan with 75% dose reduction.Conclusions: The authors found that in CS-based image reconstructions both sampling density and data incoherence affect the image quality, and suggest that a sampling scheme should be devised and optimized by use of these indicators. With this strategic

Assessing quality of reports on randomized clinical trials in nursing journals.

Science.gov (United States)

Parent, Nicole; Hanley, James A

2009-01-01

Several surveys have presented the quality of reports on randomized clinical trials (RCTs) published in general and specialty medical journals. The aim of these surveys was to raise scientific consciousness on methodological aspects pertaining to internal and external validity. These reviews have suggested that the methodological quality could be improved. We conducted a survey of reports on RCTs published in nursing journals to assess their methodological quality. The features we considered included sample size, flow of participants, assessment of baseline comparability, randomization, blinding, and statistical analysis. We collected data from all reports of RCTs published between January 1994 and December 1997 in Applied Nursing Research, Heart & Lung and Nursing Research. We hand-searched the journals and included all 54 articles in which authors reported that individuals have been randomly allocated to distinct groups. We collected data using a condensed form of the Consolidated Standards of Reporting Trials (CONSORT) statement for structured reporting of RCTs (Begg et al., 1996). Sample size calculations were included in only 22% of the reports. Only 48% of the reports provided information about the type of randomization, and a mere 22% described blinding strategies. Comparisons of baseline characteristics using hypothesis tests were abusively produced in more than 76% of the reports. Excessive use and unstructured reports of significance testing were common (59%), and all reports failed to provide magnitude of treatment differences with confidence intervals. Better methodological quality in reports of RCTs will contribute to increase the standards of nursing research.

Continuous quality control of the blood sampling procedure using a structured observation scheme

DEFF Research Database (Denmark)

Seemann, T. L.; Nybo, M.

2015-01-01

Background: An important preanalytical factor is the blood sampling procedure and its adherence to the guidelines, i.e. CLSI and ISO 15189, in order to ensure a consistent quality of the blood collection. Therefore, it is critically important to introduce quality control on this part of the process....... As suggested by the EFLM working group on the preanalytical phase we introduced continuous quality control of the blood sampling procedure using a structured observation scheme to monitor the quality of blood sampling performed on an everyday basis. Materials and methods: Based on our own routines the EFLM....... Conclusion: It is possible to establish a continuous quality control on blood sampling. It has been well accepted by the staff and we have already been able to identify critical areas in the sampling process. We find that continuous auditing increase focus on the quality of blood collection which ensures...

Guidelines for quality assurance and quality control of fish taxonomic data collected as part of the National Water-Quality Assessment Program

Science.gov (United States)

Walsh, Stephen Joseph; Meador, Michael R.

1998-01-01

Fish community structure is characterized by the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program as part of a perennial, multidisciplinary approach to evaluating the physical, chemical, and biological conditions of the Nation's water resources. The objective of quality assurance and quality control of fish taxonomic data that are collected as part of the NAWQA Program is to establish uniform guidelines and protocols for the identification, processing, and archiving of fish specimens to ensure that accurate and reliable data are collected. Study unit biologists, collaborating with regional biologists and fish taxonomic specialists, prepare a pre-sampling study plan that includes a preliminary faunal list and identification of an ichthyological curation center for receiving preserved fish specimens. Problematic taxonomic issues and protected taxa also are identified in the study plan, and collecting permits are obtained in advance of sampling activities. Taxonomic specialists are selected to identify fish specimens in the field and to assist in determining what fish specimens should be sacrificed, fixed, and preserved for laboratory identification, independent taxonomic verification, and long-term storage in reference or voucher collections. Quantitative and qualitative sampling of fishes follows standard methods previously established for the NAWQA Program. Common ichthyological techniques are used to process samples in the field and prepare fish specimens to be returned to the laboratory or sent to an institutional repository. Taxonomic identifications are reported by using a standardized list of scientific names that provides nomenclatural consistency and uniformity across study units.

A quantitative method to analyze the quality of EIA information in wind energy development and avian/bat assessments

International Nuclear Information System (INIS)

Chang, Tony; Nielsen, Erik; Auberle, William; Solop, Frederic I.

2013-01-01

The environmental impact assessment (EIA) has been a tool for decision makers since the enactment of the National Environmental Policy Act (NEPA). Since that time, few analyses have been performed to verify the quality of information and content within EIAs. High quality information within assessments is vital in order for decision makers, stake holders, and the public to understand the potential impact of proposed actions on the ecosystem and wildlife species. Low quality information has been a major cause for litigation and economic loss. Since 1999, wind energy development has seen an exponential growth with unknown levels of impact on wildlife species, in particular bird and bat species. The purpose of this article is to: (1) develop, validate, and apply a quantitative index to review avian/bat assessment quality for wind energy EIAs; and (2) assess the trends and status of avian/bat assessment quality in a sample of wind energy EIAs. This research presents the development and testing of the Avian and Bat Assessment Quality Index (ABAQI), a new approach to quantify information quality of ecological assessments within wind energy development EIAs in relation to avian and bat species based on review areas and factors derived from 23 state wind/wildlife siting guidance documents. The ABAQI was tested through a review of 49 publicly available EIA documents and validated by identifying high variation in avian and bat assessments quality for wind energy developments. Of all the reviewed EIAs, 66% failed to provide high levels of preconstruction avian and bat survey information, compared to recommended factors from state guidelines. This suggests the need for greater consistency from recommended guidelines by state, and mandatory compliance by EIA preparers to avoid possible habitat and species loss, wind energy development shut down, and future lawsuits. - Highlights: ► We developed, validated, and applied a quantitative index to review avian/bat assessment quality

A quantitative method to analyze the quality of EIA information in wind energy development and avian/bat assessments

Energy Technology Data Exchange (ETDEWEB)

Chang, Tony, E-mail: tc282@nau.edu [Environmental Science and Policy Program, School of Earth Science and Environmental Sustainability, Northern Arizona University, 602 S Humphreys P.O. Box 5694, Flagstaff, AZ, 86011 (United States); Nielsen, Erik, E-mail: erik.nielsen@nau.edu [Environmental Science and Policy Program, School of Earth Science and Environmental Sustainability, Northern Arizona University, 602 S Humphreys P.O. Box 5694, Flagstaff, AZ, 86011 (United States); Auberle, William, E-mail: william.auberle@nau.edu [Civil and Environmental Engineering Program, Department of Civil and Environmental Engineering, Northern Arizona University, 2112 S Huffer Ln P.O. Box 15600, Flagstaff, AZ, 860011 (United States); Solop, Frederic I., E-mail: fred.solop@nau.edu [Political Science Program, Department of Politics and International Affairs, Northern Arizona University, P.O. Box 15036, Flagstaff, AZ 86001 (United States)

2013-01-15

The environmental impact assessment (EIA) has been a tool for decision makers since the enactment of the National Environmental Policy Act (NEPA). Since that time, few analyses have been performed to verify the quality of information and content within EIAs. High quality information within assessments is vital in order for decision makers, stake holders, and the public to understand the potential impact of proposed actions on the ecosystem and wildlife species. Low quality information has been a major cause for litigation and economic loss. Since 1999, wind energy development has seen an exponential growth with unknown levels of impact on wildlife species, in particular bird and bat species. The purpose of this article is to: (1) develop, validate, and apply a quantitative index to review avian/bat assessment quality for wind energy EIAs; and (2) assess the trends and status of avian/bat assessment quality in a sample of wind energy EIAs. This research presents the development and testing of the Avian and Bat Assessment Quality Index (ABAQI), a new approach to quantify information quality of ecological assessments within wind energy development EIAs in relation to avian and bat species based on review areas and factors derived from 23 state wind/wildlife siting guidance documents. The ABAQI was tested through a review of 49 publicly available EIA documents and validated by identifying high variation in avian and bat assessments quality for wind energy developments. Of all the reviewed EIAs, 66% failed to provide high levels of preconstruction avian and bat survey information, compared to recommended factors from state guidelines. This suggests the need for greater consistency from recommended guidelines by state, and mandatory compliance by EIA preparers to avoid possible habitat and species loss, wind energy development shut down, and future lawsuits. - Highlights: Black-Right-Pointing-Pointer We developed, validated, and applied a quantitative index to review

A content validated questionnaire for assessment of self reported venous blood sampling practices

Directory of Open Access Journals (Sweden)

Bölenius Karin

2012-01-01

Full Text Available Abstract Background Venous blood sampling is a common procedure in health care. It is strictly regulated by national and international guidelines. Deviations from guidelines due to human mistakes can cause patient harm. Validated questionnaires for health care personnel can be used to assess preventable "near misses"--i.e. potential errors and nonconformities during venous blood sampling practices that could transform into adverse events. However, no validated questionnaire that assesses nonconformities in venous blood sampling has previously been presented. The aim was to test a recently developed questionnaire in self reported venous blood sampling practices for validity and reliability. Findings We developed a questionnaire to assess deviations from best practices during venous blood sampling. The questionnaire contained questions about patient identification, test request management, test tube labeling, test tube handling, information search procedures and frequencies of error reporting. For content validity, the questionnaire was confirmed by experts on questionnaires and venous blood sampling. For reliability, test-retest statistics were used on the questionnaire answered twice. The final venous blood sampling questionnaire included 19 questions out of which 9 had in total 34 underlying items. It was found to have content validity. The test-retest analysis demonstrated that the items were generally stable. In total, 82% of the items fulfilled the reliability acceptance criteria. Conclusions The questionnaire could be used for assessment of "near miss" practices that could jeopardize patient safety and gives several benefits instead of assessing rare adverse events only. The higher frequencies of "near miss" practices allows for quantitative analysis of the effect of corrective interventions and to benchmark preanalytical quality not only at the laboratory/hospital level but also at the health care unit/hospital ward.

The Challenges of Data Quality and Data Quality Assessment in the Big Data Era

Directory of Open Access Journals (Sweden)

Li Cai

2015-05-01

Full Text Available High-quality data are the precondition for analyzing and using big data and for guaranteeing the value of the data. Currently, comprehensive analysis and research of quality standards and quality assessment methods for big data are lacking. First, this paper summarizes reviews of data quality research. Second, this paper analyzes the data characteristics of the big data environment, presents quality challenges faced by big data, and formulates a hierarchical data quality framework from the perspective of data users. This framework consists of big data quality dimensions, quality characteristics, and quality indexes. Finally, on the basis of this framework, this paper constructs a dynamic assessment process for data quality. This process has good expansibility and adaptability and can meet the needs of big data quality assessment. The research results enrich the theoretical scope of big data and lay a solid foundation for the future by establishing an assessment model and studying evaluation algorithms.

SPIDIA-DNA: An External Quality Assessment for the pre-analytical phase of blood samples used for DNA-based analyses

Czech Academy of Sciences Publication Activity Database

Malentacchi, F.; Pazzagli, M.; Simi, L.; Orlando, C.; Wyrich, R.; Hartmann, C.C.; Verderio, P.; Pizzamiglio, S.; Ciniselli, C.M.; Tichopád, Aleš; Kubista, Mikael; Gelmini, S.

-, č. 424 (2013), s. 274-286 ISSN 0009-8981 Institutional research plan: CEZ:AV0Z50520701 Keywords : Pre-analytical phase * DNA quality * Blood samples Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 2.764, year: 2013

Image Quality Modeling and Characterization of Nyquist Sampled Framing Systems with Operational Considerations for Remote Sensing

Science.gov (United States)

Garma, Rey Jan D.

The trade between detector and optics performance is often conveyed through the Q metric, which is defined as the ratio of detector sampling frequency and optical cutoff frequency. Historically sensors have operated at Q ≈ 1, which introduces aliasing but increases the system modulation transfer function (MTF) and signal-to-noise ratio (SNR). Though mathematically suboptimal, such designs have been operationally ideal when considering system parameters such as pointing stability and detector performance. Substantial advances in read noise and quantum efficiency of modern detectors may compensate for the negative aspects associated with balancing detector/optics performance, presenting an opportunity to revisit the potential for implementing Nyquist-sampled (Q ≈ 2) sensors. A digital image chain simulation is developed and validated against a laboratory testbed using objective and subjective assessments. Objective assessments are accomplished by comparison of the modeled MTF and measurements from slant-edge photographs. Subjective assessments are carried out by performing a psychophysical study where subjects are asked to rate simulation and testbed imagery against a DeltaNIIRS scale with the aid of a marker set. Using the validated model, additional test cases are simulated to study the effects of increased detector sampling on image quality with operational considerations. First, a factorial experiment using Q-sampling, pointing stability, integration time, and detector performance is conducted to measure the main effects and interactions of each on the response variable, DeltaNIIRS. To assess the fidelity of current models, variants of the General Image Quality Equation (GIQE) are evaluated against subject-provided ratings and two modified GIQE versions are proposed. Finally, using the validated simulation and modified IQE, trades are conducted to ascertain the feasibility of implementing Q ≈ 2 designs in future systems.

Assessing the quality of reproductive health services in Egypt via exit interviews.

Science.gov (United States)

Zaky, Hassan H M; Khattab, Hind A S; Galal, Dina

2007-05-01

This study assesses the quality of reproductive health services using client satisfaction exit interviews among three groups of primary health care units run by the Ministry of Health and Population of Egypt. Each group applied a different model of intervention. The Ministry will use the results in assessing its reproductive health component in the health sector reform program, and benefits from the strengths of other models of intervention. The sample was selected in two stages. First, a stratified random sampling procedure was used to select the health units. Then the sample of female clients in each health unit was selected using the systematic random approach, whereby one in every two women visiting the unit was approached. All women in the sample coming for reproductive health services were included in the analysis. The results showed that reproductive health beneficiaries at the units implementing the new health sector reform program were more satisfied with the quality of services. Still there were various areas where clients showed significant dissatisfaction, such as waiting time, interior furnishings, cleanliness of the units and consultation time. The study showed that the staff of these units did not provide a conductive social environment as other interventions did. A significant proportion of women expressed their intention to go to private physicians owing to their flexible working hours and variety specializations. Beneficiaries were generally more satisfied with the quality of health services after attending the reformed units than the other types of units, but the generalization did not fully apply. Areas of weakness are identified.

Blind image quality assessment based on aesthetic and statistical quality-aware features

Science.gov (United States)

Jenadeleh, Mohsen; Masaeli, Mohammad Masood; Moghaddam, Mohsen Ebrahimi

2017-07-01

The main goal of image quality assessment (IQA) methods is the emulation of human perceptual image quality judgments. Therefore, the correlation between objective scores of these methods with human perceptual scores is considered as their performance metric. Human judgment of the image quality implicitly includes many factors when assessing perceptual image qualities such as aesthetics, semantics, context, and various types of visual distortions. The main idea of this paper is to use a host of features that are commonly employed in image aesthetics assessment in order to improve blind image quality assessment (BIQA) methods accuracy. We propose an approach that enriches the features of BIQA methods by integrating a host of aesthetics image features with the features of natural image statistics derived from multiple domains. The proposed features have been used for augmenting five different state-of-the-art BIQA methods, which use statistical natural scene statistics features. Experiments were performed on seven benchmark image quality databases. The experimental results showed significant improvement of the accuracy of the methods.

Building a high level sample processing and quality assessment model for biogeochemical measurements: a case study from the ocean acidification community

Science.gov (United States)

Thomas, R.; Connell, D.; Spears, T.; Leadbetter, A.; Burger, E. F.

2016-12-01

The scientific literature heavily features small-scale studies with the impact of the results extrapolated to regional/global importance. There are on-going initiatives (e.g. OA-ICC, GOA-ON, GEOTRACES, EMODNet Chemistry) aiming to assemble regional to global-scale datasets that are available for trend or meta-analyses. Assessing the quality and comparability of these data requires information about the processing chain from "sampling to spreadsheet". This provenance information needs to be captured and readily available to assess data fitness for purpose. The NOAA Ocean Acidification metadata template was designed in consultation with domain experts for this reason; the core carbonate chemistry variables have 23-37 metadata fields each and for scientists generating these datasets there could appear to be an ever increasing amount of metadata expected to accompany a dataset. While this provenance metadata should be considered essential by those generating or using the data, for those discovering data there is a sliding scale between what is considered discovery metadata (title, abstract, contacts, etc.) versus usage metadata (methodology, environmental setup, lineage, etc.), the split depending on the intended use of data. As part of the OA-ICC's activities, the metadata fields from the NOAA template relevant to the sample processing chain and QA criteria have been factored to develop profiles for, and extensions to, the OM-JSON encoding supported by the PROV ontology. While this work started focused on carbonate chemistry variable specific metadata, the factorization could be applied within the O&M model across other disciplines such as trace metals or contaminants. In a linked data world with a suitable high level model for sample processing and QA available, tools and support can be provided to link reproducible units of metadata (e.g. the standard protocol for a variable as adopted by a community) and simplify the provision of metadata and subsequent discovery.

Image quality assessment using deep convolutional networks

Science.gov (United States)

Li, Yezhou; Ye, Xiang; Li, Yong

2017-12-01

This paper proposes a method of accurately assessing image quality without a reference image by using a deep convolutional neural network. Existing training based methods usually utilize a compact set of linear filters for learning features of images captured by different sensors to assess their quality. These methods may not be able to learn the semantic features that are intimately related with the features used in human subject assessment. Observing this drawback, this work proposes training a deep convolutional neural network (CNN) with labelled images for image quality assessment. The ReLU in the CNN allows non-linear transformations for extracting high-level image features, providing a more reliable assessment of image quality than linear filters. To enable the neural network to take images of any arbitrary size as input, the spatial pyramid pooling (SPP) is introduced connecting the top convolutional layer and the fully-connected layer. In addition, the SPP makes the CNN robust to object deformations to a certain extent. The proposed method taking an image as input carries out an end-to-end learning process, and outputs the quality of the image. It is tested on public datasets. Experimental results show that it outperforms existing methods by a large margin and can accurately assess the image quality on images taken by different sensors of varying sizes.

Improvement in quality of life and sexual functioning in a comorbid sample after the unified protocol transdiagnostic group treatment.

Science.gov (United States)

de Ornelas Maia, Ana Claudia Corrêa; Sanford, Jenny; Boettcher, Hannah; Nardi, Antonio E; Barlow, David

2017-10-01

Patients with multiple mental disorders often experience sexual dysfunction and reduced quality of life. The unified protocol (UP) is a transdiagnostic treatment for emotional disorders that has the potential to improve quality of life and sexual functioning via improved emotion management. The present study evaluates changes in quality of life and sexual functioning in a highly comorbid sample treated with the UP in a group format. Forty-eight patients were randomly assigned to either a UP active-treatment group or a medication-only control group. Treatment was delivered in 14 sessions over the course of 4 months. Symptoms of anxiety and depression were assessed using the Beck Anxiety Inventory and Beck Depression Inventory. Sexual functioning was assessed by the Arizona Sexual Experience Scale (ASEX), and quality of life was assessed by the World Health Organization Quality of Life-BREF scale (WHOQOL-BREF). Quality of life, anxiety and depression all significantly improved among participants treated with the UP. Some improvement in sexual functioning was also noted. The results support the efficacy of the UP in improving quality of life and sexual functioning in comorbid patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aerial photography flight quality assessment with GPS/INS and DEM data

Science.gov (United States)

Zhao, Haitao; Zhang, Bing; Shang, Jiali; Liu, Jiangui; Li, Dong; Chen, Yanyan; Zuo, Zhengli; Chen, Zhengchao

2018-01-01

The flight altitude, ground coverage, photo overlap, and other acquisition specifications of an aerial photography flight mission directly affect the quality and accuracy of the subsequent mapping tasks. To ensure smooth post-flight data processing and fulfill the pre-defined mapping accuracy, flight quality assessments should be carried out in time. This paper presents a novel and rigorous approach for flight quality evaluation of frame cameras with GPS/INS data and DEM, using geometric calculation rather than image analysis as in the conventional methods. This new approach is based mainly on the collinearity equations, in which the accuracy of a set of flight quality indicators is derived through a rigorous error propagation model and validated with scenario data. Theoretical analysis and practical flight test of an aerial photography mission using an UltraCamXp camera showed that the calculated photo overlap is accurate enough for flight quality assessment of 5 cm ground sample distance image, using the SRTMGL3 DEM and the POSAV510 GPS/INS data. An even better overlap accuracy could be achieved for coarser-resolution aerial photography. With this new approach, the flight quality evaluation can be conducted on site right after landing, providing accurate and timely information for decision making.

Groundwater quality assessment of the quaternary unconsolidated sedimentary basin near the Pi river using fuzzy evaluation technique

Science.gov (United States)

Mohamed, Adam Khalifa; Liu, Dan; Mohamed, Mohamed A. A.; Song, Kai

2018-05-01

The present study was carried out to assess the groundwater quality for drinking purposes in the Quaternary Unconsolidated Sedimentary Basin of the North Chengdu Plain, China. Six groups of water samples (S1, S2, S3, S4, S5, and S6) are selected in the study area. These samples were analyzed for 19 different physicochemical water quality parameters to assess groundwater quality. The physicochemical parameters of groundwater were compared with China's Quality Standards for Groundwater (GB/T14848-93). Interpretation of physicochemical data revealed that groundwater in the basin was slightly alkaline. Total hardness and total dissolved solid values show that the investigated water is classified as very hard and fresh water, respectively. The sustainability of groundwater for drinking purposes was assessed based on the fuzzy mathematics evaluation (FME) method. The results of the assessment were classified into five groups based on their relative suitability for portable use (grade I = most suitable to grade V = least suitable), according to (GB/T 14848-93). The assessment results reveal that the quality of groundwater in most of the wells was class I, II and III and suitable for drinking purposes, but well (S2) has been found to be in class V, which is classified as very poor and cannot be used for drinking. Also, the FME method was compared with the comprehensive evaluation method. The FME method was found to be more comprehensive and reasonable to assess groundwater quality. This study can provide an important frame of reference for decision making on improving groundwater quality in the study area and nearby surrounding.

Core sampling system spare parts assessment

International Nuclear Information System (INIS)

Walter, E.J.

1995-01-01

Soon, there will be 4 independent core sampling systems obtaining samples from the underground tanks. It is desirable that these systems be available for sampling during the next 2 years. This assessment was prepared to evaluate the adequacy of the spare parts identified for the core sampling system and to provide recommendations that may remediate overages or inadequacies of spare parts

Groundwater sampling: Chapter 5

Science.gov (United States)

Wang, Qingren; Munoz-Carpena, Rafael; Foster, Adam; Migliaccio, Kati W.; Li, Yuncong; Migliaccio, Kati

2011-01-01

About the book: As water quality becomes a leading concern for people and ecosystems worldwide, it must be properly assessed in order to protect water resources for current and future generations. Water Quality Concepts, Sampling, and Analyses supplies practical information for planning, conducting, or evaluating water quality monitoring programs. It presents the latest information and methodologies for water quality policy, regulation, monitoring, field measurement, laboratory analysis, and data analysis. The book addresses water quality issues, water quality regulatory development, monitoring and sampling techniques, best management practices, and laboratory methods related to the water quality of surface and ground waters. It also discusses basic concepts of water chemistry and hydrology related to water sampling and analysis; instrumentation; water quality data analysis; and evaluation and reporting results.

Towards Quality Assessment in an EFL Programme

Science.gov (United States)

Ali, Holi Ibrahim Holi; Al Ajmi, Ahmed Ali Saleh

2013-01-01

Assessment is central in education and the teaching-learning process. This study attempts to explore the perspectives and views about quality assessment among teachers of English as a Foreign Language (EFL), and to find ways of promoting quality assessment. Quantitative methodology was used to collect data. To answer the study questions, a…

SPIDIA-RNA: First external quality assessment for the pre-analytical phase of blood samples used for RNA based analyses

Czech Academy of Sciences Publication Activity Database

Pazzagli, M.; Malentacchi, F.; Simi, L.; Wyrich, R.; Guenther, K.; Hartmann, C.; Verderio, P.; Pizzamiglio, S.; Ciniselli, C.M.; Tichopád, Aleš; Kubista, Mikael; Gelmini, S.

2013-01-01

Roč. 59, č. 1 (2013), s. 20-31 ISSN 1046-2023 Institutional research plan: CEZ:AV0Z50520701 Keywords : Pre-analytical phase * RNA quality * Blood samples Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.221, year: 2013

Biota dose assessment of small mammals sampled near uranium mines in northern Arizona

Energy Technology Data Exchange (ETDEWEB)

Jannik, T. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Minter, K. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kuhne, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kubilius, W. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2018-01-09

In 2015, the U. S. Geological Survey (USGS) collected approximately 50 small mammal carcasses from Northern Arizona uranium mines and other background locations. Based on the highest gross alpha results, 11 small mammal samples were selected for radioisotopic analyses. None of the background samples had significant gross alpha results. The 11 small mammals were identified relative to the three ‘indicator’ mines located south of Fredonia, AZ on the Kanab Plateau (Kanab North Mine, Pinenut Mine, and Arizona 1 Mine) (Figure 1-1) and are operated by Energy Fuels Resources Inc. (EFRI). EFRI annually reports soil analysis for uranium and radium-226 using Arizona Department of Environmental Quality (ADEQ)-approved Standard Operating Procedures for Soil Sampling (EFRI 2016a, 2016b, 2017). In combination with the USGS small mammal radioiosotopic tissue analyses, a biota dose assessment was completed by Savannah River National Laboratory (SRNL) using the RESidual RADioactivity-BIOTA (RESRAD-BIOTA, V. 1.8) dose assessment tool provided by the Argonne National Laboratory (ANL 2017).

Groundwater quality assessment for domestic and agriculture purposes in Puducherry region

Science.gov (United States)

Sridharan, M.; Senthil Nathan, D.

2017-11-01

Totally about 174 groundwater samples have been collected during pre-monsoon and post-monsoon season to study the suitability for domestic and agriculture purposes along the coastal aquifers of Puducherry region. Parameters such as pH, total dissolved solids (TDS), electrical conductivity (EC), sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), bicarbonate (HCO3), chloride (Cl) and sulfate (SO4) were analyzed to assess the suitability of groundwater for domestic purposes. Sodium adsorption ratio (SAR), magnesium adsorption ratio (MAR), residual sodium bicarbonate (RSC), soluble sodium percentage (Na%), permeability index (PI) and chlorinity index were assessed for irrigation purposes. The higher concentration of ions such as Na, Ca, Cl and So4 indicates seawater intrusion, mineral dissolution, intense agricultural practices and improper sewage disposal. The level of EC, TDS and hardness in the water samples indicates that maximum of them are suitable for drinking and domestic purposes. The parameters such as SAR, Na%, PI, MAR and Chlorinity index indicates that majority of water sample are very good to moderately suitable for agriculture. In pre-monsoon, RSC of about 5.7% of samples was higher which when used for a longer time alter the soil properties and reduce crop production. Wilcox diagram suggests that water samples are of medium saline to low sodium type indicating that groundwater is suitable for irrigation. Temporal variation of groundwater quality shows significant increasing trend in EC, TDS and ions like Mg, K and Cl in the last decade, mainly due to anthropogenic activities with little geogenic impact in the quality of groundwater.

Quality of life assessment of patients with schizophrenic spectrum disorders from Psychosocial Care Centers

Directory of Open Access Journals (Sweden)

Tatiana Fernandes Carpinteiro da Silva

2011-01-01

Full Text Available OBJECTIVE: Assessing the quality of life and the clinical and social-demographic factors associated in schizophrenic spectrum patients (ICD-10 F20-F29 attending CAPS at the programmatic area 3.0. METHODS: A cross-sectional study was carried out in a sample of schizophrenic spectrum patients who have been enrolled in 2008 in CAPS in programmatic area (AP 3 at Rio de Janeiro city, using MINIPLUS to assess schizophrenia spectrum disorder and use of psychoactive substances, Positive and Negative Symptoms Scale (PANSS to assess psychiatric symptoms and Quality of Life Scale (QLS-BR to assess the quality of life. RESULTS: Seventy nine patients were included, of whom 74 (93.7% presented some impairment in quality of life. The most frequently affected area was occupational performance. Variables that showed a significant association with severe impairment of quality of life were: marital status, race, occupation, who patients lived with, homelessness, having children, previous psychiatric hospitalization, negative symptoms and symptoms designated as not applicable (being characterized by a lack of typical positive and negative symptoms. CONCLUSION: The knowledge of these factors should be crucial to implement health policies and psychosocial rehabilitation programs focused on improving the quality of life of these patients.

Assessing the effects of regional payment for watershed services program on water quality using an intervention analysis model.

Science.gov (United States)

Lu, Yan; He, Tian

2014-09-15

Much attention has been recently paid to ex-post assessments of socioeconomic and environmental benefits of payment for ecosystem services (PES) programs on poverty reduction, water quality, and forest protection. To evaluate the effects of a regional PES program on water quality, we selected chemical oxygen demand (COD) and ammonia-nitrogen (NH3-N) as indicators of water quality. Statistical methods and an intervention analysis model were employed to assess whether the PES program produced substantial changes in water quality at 10 water-quality sampling stations in the Shaying River watershed, China during 2006-2011. Statistical results from paired-sample t-tests and box plots of COD and NH3-N concentrations at the 10 stations showed that the PES program has played a positive role in improving water quality and reducing trans-boundary water pollution in the Shaying River watershed. Using the intervention analysis model, we quantitatively evaluated the effects of the intervention policy, i.e., the watershed PES program, on water quality at the 10 stations. The results suggest that this method could be used to assess the environmental benefits of watershed or water-related PES programs, such as improvements in water quality, seasonal flow regulation, erosion and sedimentation, and aquatic habitat. Copyright © 2014 Elsevier B.V. All rights reserved.

Statistical issues in reporting quality data: small samples and casemix variation.

Science.gov (United States)

Zaslavsky, A M

2001-12-01

To present two key statistical issues that arise in analysis and reporting of quality data. Casemix variation is relevant to quality reporting when the units being measured have differing distributions of patient characteristics that also affect the quality outcome. When this is the case, adjustment using stratification or regression may be appropriate. Such adjustments may be controversial when the patient characteristic does not have an obvious relationship to the outcome. Stratified reporting poses problems for sample size and reporting format, but may be useful when casemix effects vary across units. Although there are no absolute standards of reliability, high reliabilities (interunit F > or = 10 or reliability > or = 0.9) are desirable for distinguishing above- and below-average units. When small or unequal sample sizes complicate reporting, precision may be improved using indirect estimation techniques that incorporate auxiliary information, and 'shrinkage' estimation can help to summarize the strength of evidence about units with small samples. With broader understanding of casemix adjustment and methods for analyzing small samples, quality data can be analysed and reported more accurately.

Assessing the quality of care in a new nation: South Sudan's first national health facility assessment.

Science.gov (United States)

Berendes, Sima; Lako, Richard L; Whitson, Donald; Gould, Simon; Valadez, Joseph J

2014-10-01

We adapted a rapid quality of care monitoring method to a fragile state with two aims: to assess the delivery of child health services in South Sudan at the time of independence and to strengthen local capacity to perform regular rapid health facility assessments. Using a two-stage lot quality assurance sampling (LQAS) design, we conducted a national cross-sectional survey among 156 randomly selected health facilities in 10 states. In each of these facilities, we obtained information on a range of access, input, process and performance indicators during structured interviews and observations. Quality of care was poor with all states failing to achieve the 80% target for 14 of 19 indicators. For example, only 12% of facilities were classified as acceptable for their adequate utilisation by the population for sick-child consultations, 16% for staffing, 3% for having infection control supplies available and 0% for having all child care guidelines. Health worker performance was categorised as acceptable in only 6% of cases related to sick-child assessments, 38% related to medical treatment for the given diagnosis and 33% related to patient counselling on how to administer the prescribed drugs. Best performance was recorded for availability of in-service training and supervision, for seven and ten states, respectively. Despite ongoing instability, the Ministry of Health developed capacity to use LQAS for measuring quality of care nationally and state-by-state, which will support efficient and equitable resource allocation. Overall, our data revealed a desperate need for improving the quality of care in all states. © 2014 John Wiley & Sons Ltd.

Assessment of aggregate quality and petrographic properties' influence on rock quality: A case study from Nordland county, Norway

Science.gov (United States)

Kløve Keiding, Jakob; Erichsen, Eyolf; Heldal, Tom; Aslaksen Aasly, Kari

2017-04-01

Good access to construction materials is crucial for future infrastructure development and continued economic growth. In Norway >80 % of construction materials come from crushed aggregates and represent an growing share of the consumption. Although recycling to some extend can cover the need for construction materials, economic growth, increasing population and urbanization necessitates exploitation of new rock resources in Norway as well as many other parts of the world. Aggregates must fulfill a number of technical requirements to ensure high quality and long life expectancy of new roads, buildings and structures. Aggregates also have to be extracted near the consumer market. Particularly for road construction strict criteria are in place for wearing course for roads with high traffic density. Thus knowledge of mechanical rock quality is paramount for both exploitation as well as future resource and land-use planning but is often not assessed or mapped beyond the quarry scale. The Geological survey of Norway runs a database with information about crushed aggregate deposits from >1500 Norwegian quarries and sample sites. Here we use mechanical test analyses from the database to assess the aggregate quality in the Nordland county, Norway. Maps have been produced linking bed rock geology with rock quality parameters. The survey documents that the county is challenged in meeting the requirements for roads with high traffic density and especially in the middle parts of the county many samples have weak mechanical properties. This to some degree reflect that weak Cambro-Silurian rocks like phyllite, schist, carbonate and greenstone are abundant in Nordland. Typically mechanically stronger rock types such as gabbro, monzonite and granite are also exposed in large parts of the county, but are also characterized by relative poor or very variable mechanical test quality. Preliminary results indicate that many intrinsic parameters influence the mechanical rock strength, but

STANDARDIZING QUALITY ASSESSMENT OF FUSED REMOTELY SENSED IMAGES

Directory of Open Access Journals (Sweden)

C. Pohl

2017-09-01

Full Text Available The multitude of available operational remote sensing satellites led to the development of many image fusion techniques to provide high spatial, spectral and temporal resolution images. The comparison of different techniques is necessary to obtain an optimized image for the different applications of remote sensing. There are two approaches in assessing image quality: 1. Quantitatively by visual interpretation and 2. Quantitatively using image quality indices. However an objective comparison is difficult due to the fact that a visual assessment is always subject and a quantitative assessment is done by different criteria. Depending on the criteria and indices the result varies. Therefore it is necessary to standardize both processes (qualitative and quantitative assessment in order to allow an objective image fusion quality evaluation. Various studies have been conducted at the University of Osnabrueck (UOS to establish a standardized process to objectively compare fused image quality. First established image fusion quality assessment protocols, i.e. Quality with No Reference (QNR and Khan's protocol, were compared on varies fusion experiments. Second the process of visual quality assessment was structured and standardized with the aim to provide an evaluation protocol. This manuscript reports on the results of the comparison and provides recommendations for future research.

Standardizing Quality Assessment of Fused Remotely Sensed Images

Science.gov (United States)

Pohl, C.; Moellmann, J.; Fries, K.

2017-09-01

The multitude of available operational remote sensing satellites led to the development of many image fusion techniques to provide high spatial, spectral and temporal resolution images. The comparison of different techniques is necessary to obtain an optimized image for the different applications of remote sensing. There are two approaches in assessing image quality: 1. Quantitatively by visual interpretation and 2. Quantitatively using image quality indices. However an objective comparison is difficult due to the fact that a visual assessment is always subject and a quantitative assessment is done by different criteria. Depending on the criteria and indices the result varies. Therefore it is necessary to standardize both processes (qualitative and quantitative assessment) in order to allow an objective image fusion quality evaluation. Various studies have been conducted at the University of Osnabrueck (UOS) to establish a standardized process to objectively compare fused image quality. First established image fusion quality assessment protocols, i.e. Quality with No Reference (QNR) and Khan's protocol, were compared on varies fusion experiments. Second the process of visual quality assessment was structured and standardized with the aim to provide an evaluation protocol. This manuscript reports on the results of the comparison and provides recommendations for future research.

Factor Analysis in Assessing the Research Methodology Quality of Systematic Reviews

Directory of Open Access Journals (Sweden)

Andrada Elena URDA-CÎMPEAN

2011-12-01

Full Text Available Introduction: Many high quality systematic reviews available from medical journals, data bases and other electronic sources differ in quality and provide different answers to the same question. The literature recommended the use of a checklist type approach, which exceeds many of the problems associated with measurements. Aim: This study proposes to identify in a checklist type approach the most commonly used factors (from a methodological point of view in assessing the quality of systematic reviews, and then mirror the actual stage of medical writing. We want to analyze the factors’ occurrence and / or their development in the text and in the abstract of systematic reviews published in 2011. Methods: The present study randomly selected only free full text systematic reviews published in 2011, systematic reviews found in Pubmed and in Cochrane Database. The most commonly used factors were identified in PRISMA statement and quality measurement tools. Results: The evaluated systematic reviews mentioned or developed several of the factors studied. Only 78% of the papers surveyed have used the correct IMRAD format and 59% of them have mentioned the sample size used. The correspondence between the content of the paper and its abstract is summarized in the proportion of 54.63% and 51.85% for the two sets of factors, and it can lead to scarce appreciation of the article provided that only abstracts are read. Conclusions: Researchers do not properly take into consideration scientific articles and assessment tools used for quality evaluation. They should place more value over methodological factors which help assess systematic review quality, while journals form the only party who can enforce quality standards in medical writing.

A Critical Analysis of Assessment Quality in Genomics and Bioinformatics Education Research

Science.gov (United States)

Campbell, Chad E.; Nehm, Ross H.

2013-01-01

The growing importance of genomics and bioinformatics methods and paradigms in biology has been accompanied by an explosion of new curricula and pedagogies. An important question to ask about these educational innovations is whether they are having a meaningful impact on students’ knowledge, attitudes, or skills. Although assessments are necessary tools for answering this question, their outputs are dependent on their quality. Our study 1) reviews the central importance of reliability and construct validity evidence in the development and evaluation of science assessments and 2) examines the extent to which published assessments in genomics and bioinformatics education (GBE) have been developed using such evidence. We identified 95 GBE articles (out of 226) that contained claims of knowledge increases, affective changes, or skill acquisition. We found that 1) the purpose of most of these studies was to assess summative learning gains associated with curricular change at the undergraduate level, and 2) a minority (<10%) of studies provided any reliability or validity evidence, and only one study out of the 95 sampled mentioned both validity and reliability. Our findings raise concerns about the quality of evidence derived from these instruments. We end with recommendations for improving assessment quality in GBE. PMID:24006400

The ESO Diffuse Interstellar Bands Large Exploration Survey (EDIBLES) . I. Project description, survey sample, and quality assessment

Science.gov (United States)

Cox, Nick L. J.; Cami, Jan; Farhang, Amin; Smoker, Jonathan; Monreal-Ibero, Ana; Lallement, Rosine; Sarre, Peter J.; Marshall, Charlotte C. M.; Smith, Keith T.; Evans, Christopher J.; Royer, Pierre; Linnartz, Harold; Cordiner, Martin A.; Joblin, Christine; van Loon, Jacco Th.; Foing, Bernard H.; Bhatt, Neil H.; Bron, Emeric; Elyajouri, Meriem; de Koter, Alex; Ehrenfreund, Pascale; Javadi, Atefeh; Kaper, Lex; Khosroshadi, Habib G.; Laverick, Mike; Le Petit, Franck; Mulas, Giacomo; Roueff, Evelyne; Salama, Farid; Spaans, Marco

2017-10-01

The carriers of the diffuse interstellar bands (DIBs) are largely unidentified molecules ubiquitously present in the interstellar medium (ISM). After decades of study, two strong and possibly three weak near-infrared DIBs have recently been attributed to the C60^+ fullerene based on observational and laboratory measurements. There is great promise for the identification of the over 400 other known DIBs, as this result could provide chemical hints towards other possible carriers. In an effort tosystematically study the properties of the DIB carriers, we have initiated a new large-scale observational survey: the ESO Diffuse Interstellar Bands Large Exploration Survey (EDIBLES). The main objective is to build on and extend existing DIB surveys to make a major step forward in characterising the physical and chemical conditions for a statistically significant sample of interstellar lines-of-sight, with the goal to reverse-engineer key molecular properties of the DIB carriers. EDIBLES is a filler Large Programme using the Ultraviolet and Visual Echelle Spectrograph at the Very Large Telescope at Paranal, Chile. It is designed to provide an observationally unbiased view of the presence and behaviour of the DIBs towards early-spectral-type stars whose lines-of-sight probe the diffuse-to-translucent ISM. Such a complete dataset will provide a deep census of the atomic and molecular content, physical conditions, chemical abundances and elemental depletion levels for each sightline. Achieving these goals requires a homogeneous set of high-quality data in terms of resolution (R 70 000-100 000), sensitivity (S/N up to 1000 per resolution element), and spectral coverage (305-1042 nm), as well as a large sample size (100+ sightlines). In this first paper the goals, objectives and methodology of the EDIBLES programme are described and an initial assessment of the data is provided.

Fuzzy model for determination and assessment of groundwater quality in the city of Zrenjanin, Serbia

Directory of Open Access Journals (Sweden)

Kiurski-Milosević Jelena Ž.

2015-01-01

Full Text Available The application of the fuzzy logic for determination and assessment of the chemical quality of groundwater for drinking purposes in the city of Zrenjanin is presented. The degree of certainty and uncertainties are one of the problems in the most commonly used methods for assessing the water quality. Fuzzy logic can successfully handle these problems. Evaluation of fuzzy model was carried out on the samples from two representative wells that are located at depths of two aquifers from which water is taken to supply the population as drinking water. The samples were analyzed on 8 different chemical water quality parameters. In the research arsenic concentration (As3+, As5+ is considered as the dominant parameter due to its suspecting carcinogenic effects on human health. This type of research is for the first time conducted in the city of Zrenjanin, middle Banat region. [Projekat Ministarstva nauke Republike Srbije, br. MNTR174009 i br. TR34014

Assessing users satisfaction with service quality in Slovenian public library

Directory of Open Access Journals (Sweden)

Igor Podbrežnik

2016-07-01

Full Text Available Purpose: A research was made into user satisfaction with regard to the quality of library services in one of the Slovenian public libraries. The aim was to establish the type of service quality level actually expected by the users, and to determine their satisfaction with the current quality level of available library services.Methodology: The research was performed by means of the SERVQUAL measuring tool which was used to determine the size and direction of the gap between the detected and the expected quality of library services among public library users.Results: Different groups of users provide different assessments of specific quality factors, and a library cannot satisfy the expectations of each and every user if most quality factors display discrepancies between the estimated perception and expectations. The users expect more reliable services and more qualified library staff members who would understand and allocate time for each user’s individual needs. The largest discrepancies from the expectations are detected among users in the under-35 age group and among the more experienced and skilled library users. The results of factor analysis confirm the fact that a higher number of quality factors can be explained by three common factors affecting the satisfaction of library users. A strong connection between user satisfaction and their assessment of the integral quality of services and loyalty has been established.Research restrictions: The research results should not be generalised and applied to all Slovenian public libraries since they differ in many important aspects. In addition, a non-random sampling method was used.Research originality/Applicability: The conducted research illustrates the use of a measuring tool that was developed with the aim of determining the satisfaction of users with the quality of library services in Slovenian public libraries. Keywords: public library, user satisfaction, quality of library services, user

Clinical Music Study Quality Assessment Scale (MUSIQUAS)

NARCIS (Netherlands)

Jaschke, A.C.; Eggermont, L.H.P.; Scherder, E.J.A.; Shippton, M.; Hiomonides, I.

2013-01-01

AIMS Quality assessment of studies is essential for the understanding and application of these in systematic reviews and meta analyses, the two “gold standards” of medical sciences. Publications in scientific journals have extensively used assessment scales to address poor methodological quality,

Institutional Consequences of Quality Assessment

Science.gov (United States)

Joao Rosa, Maria; Tavares, Diana; Amaral, Alberto

2006-01-01

This paper analyses the opinions of Portuguese university rectors and academics on the quality assessment system and its consequences at the institutional level. The results obtained show that university staff (rectors and academics, with more of the former than the latter) held optimistic views of the positive consequences of quality assessment…

Assessment of the Quality of Water Treated and Distributed By the Akwa Ibom State Water Company

OpenAIRE

N. O. Eddy; A. S. Ekop

2007-01-01

The quality of water treated and distributed by the Akwa Ibom Water Company has been assessed by analyzing samples of water collected from different distribution points for their physiochemical parameters, major ions, nutrients and bacteriological quality. The observed values were compared with standard values given by the World Health Organization for portable water. The quality of the analysed water is found fit for human consumption.

Image Quality Assessment for Fake Biometric Detection: Application to Iris, Fingerprint, and Face Recognition.

Science.gov (United States)

Galbally, Javier; Marcel, Sébastien; Fierrez, Julian

2014-02-01

To ensure the actual presence of a real legitimate trait in contrast to a fake self-manufactured synthetic or reconstructed sample is a significant problem in biometric authentication, which requires the development of new and efficient protection measures. In this paper, we present a novel software-based fake detection method that can be used in multiple biometric systems to detect different types of fraudulent access attempts. The objective of the proposed system is to enhance the security of biometric recognition frameworks, by adding liveness assessment in a fast, user-friendly, and non-intrusive manner, through the use of image quality assessment. The proposed approach presents a very low degree of complexity, which makes it suitable for real-time applications, using 25 general image quality features extracted from one image (i.e., the same acquired for authentication purposes) to distinguish between legitimate and impostor samples. The experimental results, obtained on publicly available data sets of fingerprint, iris, and 2D face, show that the proposed method is highly competitive compared with other state-of-the-art approaches and that the analysis of the general image quality of real biometric samples reveals highly valuable information that may be very efficiently used to discriminate them from fake traits.

Groundwater quality assessment of urban Bengaluru using multivariate statistical techniques

Science.gov (United States)

Gulgundi, Mohammad Shahid; Shetty, Amba

2018-03-01

Groundwater quality deterioration due to anthropogenic activities has become a subject of prime concern. The objective of the study was to assess the spatial and temporal variations in groundwater quality and to identify the sources in the western half of the Bengaluru city using multivariate statistical techniques. Water quality index rating was calculated for pre and post monsoon seasons to quantify overall water quality for human consumption. The post-monsoon samples show signs of poor quality in drinking purpose compared to pre-monsoon. Cluster analysis (CA), principal component analysis (PCA) and discriminant analysis (DA) were applied to the groundwater quality data measured on 14 parameters from 67 sites distributed across the city. Hierarchical cluster analysis (CA) grouped the 67 sampling stations into two groups, cluster 1 having high pollution and cluster 2 having lesser pollution. Discriminant analysis (DA) was applied to delineate the most meaningful parameters accounting for temporal and spatial variations in groundwater quality of the study area. Temporal DA identified pH as the most important parameter, which discriminates between water quality in the pre-monsoon and post-monsoon seasons and accounts for 72% seasonal assignation of cases. Spatial DA identified Mg, Cl and NO3 as the three most important parameters discriminating between two clusters and accounting for 89% spatial assignation of cases. Principal component analysis was applied to the dataset obtained from the two clusters, which evolved three factors in each cluster, explaining 85.4 and 84% of the total variance, respectively. Varifactors obtained from principal component analysis showed that groundwater quality variation is mainly explained by dissolution of minerals from rock water interactions in the aquifer, effect of anthropogenic activities and ion exchange processes in water.

Application of reference materials for quality assessment in neutron activation analysis

International Nuclear Information System (INIS)

Obrusnik, I.; Eckschlager, K.

1993-01-01

It is generally accepted that an analytical procedure can be regarded as an information production system yielding information on the composition of the analyzed sample. Thus, information theory can be useful and the quantities characterizing the information properties of an analytical method may be applied not only as evaluation criteria but also as objective functions in the optimization. The usability of information theory is demonstrated on the example of neutron activation analysis. Both precision and bias of NAA results are taken into account together with the possible use of reference materials for quality assessment. The influence of the above-mentioned parameters on information properties such as information gain and profitability of NAA results is discussed in detail. It has been proved that information theory is especially useful in choosing suitable reference materials for the quality assessment of routine analytical procedures not only with respect to matrix and analyte concentration in the sample but also to concentrations and uncertainties of certified values in the CRM used. In the extreme trace analysis, CRMs with relatively large uncertainties and very low certified concentrations can still yield rather high information gain of results. (author) 14 refs.; 9 figs

Assessment Quality in Tertiary Education: An Integrative Literature Review

NARCIS (Netherlands)

Gerritsen-van Leeuwenkamp, Karin; Joosten-ten Brinke, Desirée; Kester, Liesbeth

2018-01-01

In tertiary education, inferior assessment quality is a problem that has serious consequences for students, teachers, government, and society. A lack of a clear and overarching conceptualization of assessment quality can cause difficulties in guaranteeing assessment quality in practice. Thus, the

Environmental quality assessment of groundwater resources in Al Jabal Al Akhdar, Sultanate of Oman

Science.gov (United States)

Al-Kalbani, Mohammed Saif; Price, Martin F.; Ahmed, Mushtaque; Abahussain, Asma; O'Higgins, Timothy

2017-11-01

The research was conducted to assess the quality of groundwater resources of Al Jabal Al Akhdar, Oman. 11 drinking water sources were sampled during summer and winter seasons during 2012-2013 to evaluate their physico-chemical quality indicators; and assess their suitability for drinking and other domestic purposes. Sample collection, handling and processing followed the standard methods recommended by APHA and analyzed in quality assured laboratories using appropriate analytical methods and instrumental techniques. The results show that the quality parameters in all drinking water resources are within the permissible limits set by Omani and WHO standards; and the drinking water quality index is good or medium in quality based on NFS-WQI classification criteria, indicating their suitability for human consumption. There is an indication of the presence of high nitrate concentrations in some groundwater wells, which require more investigations and monitoring program to be conducted on regular basis to ensure good quality water supply for the residents in the mountain. The trilinear Piper diagram shows that most of the drinking water resources of the study area fall in the field of calcium and bicarbonate type with some magnesium bicarbonate type indicating that most of the major ions are natural in origin due to the geology of the region. This study is a first step towards providing indicators on groundwater quality of this fragile mountain ecosystem, which will be the basis for future planning decisions on corrective demand management measures to protect groundwater resources of Al Jabal Al Akhdar.

Rapid quality assessment of Radix Aconiti Preparata using direct analysis in real time mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Zhu Hongbin; Wang Chunyan; Qi Yao [Changchun Center of Mass Spectrometry and Chemical Biology Laboratory, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); University of Chinese Academy of Sciences, Beijing 100039 (China); Song Fengrui, E-mail: songfr@ciac.jl.cn [Changchun Center of Mass Spectrometry and Chemical Biology Laboratory, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Liu Zhiqiang; Liu Shuying [Changchun Center of Mass Spectrometry and Chemical Biology Laboratory, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China)

2012-11-08

Highlights: Black-Right-Pointing-Pointer DART MS combined with PCA and HCA was used to rapidly identify markers of Radix Aconiti. Black-Right-Pointing-Pointer The DART MS behavior of six aconitine-type alkaloids was investigated. Black-Right-Pointing-Pointer Chemical markers were recognized between the qualified and unqualified samples. Black-Right-Pointing-Pointer DART MS was shown to be an effective tool for quality control of Radix Aconiti Preparata. - Abstract: This study presents a novel and rapid method to identify chemical markers for the quality control of Radix Aconiti Preparata, a world widely used traditional herbal medicine. In the method, the samples with a fast extraction procedure were analyzed using direct analysis in real time mass spectrometry (DART MS) combined with multivariate data analysis. At present, the quality assessment approach of Radix Aconiti Preparata was based on the two processing methods recorded in Chinese Pharmacopoeia for the purpose of reducing the toxicity of Radix Aconiti and ensuring its clinical therapeutic efficacy. In order to ensure the safety and effectivity in clinical use, the processing degree of Radix Aconiti should be well controlled and assessed. In the paper, hierarchical cluster analysis and principal component analysis were performed to evaluate the DART MS data of Radix Aconiti Preparata samples in different processing times. The results showed that the well processed Radix Aconiti Preparata, unqualified processed and the raw Radix Aconiti could be clustered reasonably corresponding to their constituents. The loading plot shows that the main chemical markers having the most influence on the discrimination amongst the qualified and unqualified samples were mainly some monoester diterpenoid aconitines and diester diterpenoid aconitines, i.e. benzoylmesaconine, hypaconitine, mesaconitine, neoline, benzoylhypaconine, benzoylaconine, fuziline, aconitine and 10-OH-mesaconitine. The established DART MS approach in

Rapid quality assessment of Radix Aconiti Preparata using direct analysis in real time mass spectrometry

International Nuclear Information System (INIS)

Zhu Hongbin; Wang Chunyan; Qi Yao; Song Fengrui; Liu Zhiqiang; Liu Shuying

2012-01-01

Highlights: ► DART MS combined with PCA and HCA was used to rapidly identify markers of Radix Aconiti. ► The DART MS behavior of six aconitine-type alkaloids was investigated. ► Chemical markers were recognized between the qualified and unqualified samples. ► DART MS was shown to be an effective tool for quality control of Radix Aconiti Preparata. - Abstract: This study presents a novel and rapid method to identify chemical markers for the quality control of Radix Aconiti Preparata, a world widely used traditional herbal medicine. In the method, the samples with a fast extraction procedure were analyzed using direct analysis in real time mass spectrometry (DART MS) combined with multivariate data analysis. At present, the quality assessment approach of Radix Aconiti Preparata was based on the two processing methods recorded in Chinese Pharmacopoeia for the purpose of reducing the toxicity of Radix Aconiti and ensuring its clinical therapeutic efficacy. In order to ensure the safety and effectivity in clinical use, the processing degree of Radix Aconiti should be well controlled and assessed. In the paper, hierarchical cluster analysis and principal component analysis were performed to evaluate the DART MS data of Radix Aconiti Preparata samples in different processing times. The results showed that the well processed Radix Aconiti Preparata, unqualified processed and the raw Radix Aconiti could be clustered reasonably corresponding to their constituents. The loading plot shows that the main chemical markers having the most influence on the discrimination amongst the qualified and unqualified samples were mainly some monoester diterpenoid aconitines and diester diterpenoid aconitines, i.e. benzoylmesaconine, hypaconitine, mesaconitine, neoline, benzoylhypaconine, benzoylaconine, fuziline, aconitine and 10-OH-mesaconitine. The established DART MS approach in combination with multivariate data analysis provides a very flexible and reliable method for quality

Assessing health-related quality of life in urology ? a survey of 4500 German urologists

OpenAIRE

Schmick, A.; Juergensen, M.; Rohde, V.; Katalinic, A.; Waldmann, A.

2017-01-01

Background Urological diseases and their treatment may negatively influence continence, potency, and health-related quality of life (HRQOL). Although current guidelines recommend HRQOL assessment in clinical urology, specific guidance on how to assess HRQOL is frequently absent. We evaluated whether and how urologists assess HRQOL and how they determine its practicality. Methods A random sample of 4500 (from 5200 identified German urologists) was drawn and invited to participate in a postal s...

Assessing Assessment Quality: Criteria for Quality Assurance in Design of (Peer) Assessment for Learning--A Review of Research Studies

Science.gov (United States)

Tillema, Harm; Leenknecht, Martijn; Segers, Mien

2011-01-01

The interest in "assessment for learning" (AfL) has resulted in a search for new modes of assessment that are better aligned to students' learning how to learn. However, with the introduction of new assessment tools, also questions arose with respect to the quality of its measurement. On the one hand, the appropriateness of traditional,…

Evaluation of the radiological quality of the water on Bikini and Eneu Islands in 1975: dose assessment based on initial sampling

International Nuclear Information System (INIS)

Noshkin, V.E.; Robison, W.L.; Wong, K.M.; Eagle, R.J.

1977-01-01

This report describes the radiological quality of the groundwater on the two main islands (Eneu and Bikini) of Bikini Atoll during June 1975 (from data obtained from water samples collected at old and new well sites on both islands) and the cistern water on Bikini Island. Based on analyses of these samples, we found that the cistern water from Bikini Island is both chemically and radiologically acceptable as drinking water in accordance with standard limits established by the U.S. Public Health Service. However, on both islands the quality of the groundwater varied from one site to another. At some wells both chemical and radiological quality are acceptable; at others one or both are unacceptable according to U.S. Public Health Standards. The doses we predict from consumption of both cistern and groundwater are acceptable under federal guidelines. However, doses predicted from consumption of groundwater are high enough to warrant careful evaluation of other potential exposure pathways

Computer graphics for quality control in the INAA of geological samples

International Nuclear Information System (INIS)

Grossman, J.N.; Baedecker, P.A.

1987-01-01

A data reduction system for the routine instrumental activation analysis of samples is described, with particular emphasis on interactive graphics capabilities for evaluating analytical quality. Graphics procedures were developed to interactively control the analysis of selected photopeaks during spectral analysis, and to evaluate detector performance during a given counting cycle. Graphics algorithms are also used to compare the data on reference samples with accepted values, to prepare quality control charts to evaluate long term precision and to search for systematic variations in data on reference samples as a function of time. (author)

Groundwater Quality Assessment Based on Geographical Information System and Groundwater Quality Index

Directory of Open Access Journals (Sweden)

Zahra Derakhshan

2015-06-01

Full Text Available Iran is located in an arid and semi-arid part of the world. Accordingly, the management of the water resources in the country is a priority. In this regard, determining the quality and pollution of surface water and groundwater is very important, especially in areas where groundwater resources are used for drinking. Groundwater quality index (GQI checks the components of the available water with various quality levels. To assess the quality of drinking groundwater of Yazd-Ardakan plain according to GQI in geographical information system (GIS environment, the electrical conductivity, sodium, calcium, magnesium, chlorine, pH, sodium adsorption ratio, bicarbonate, sulfate, potassium, water hardness, and all substances dissolved in the waters of 80 wells were determined. The samples were obtained from Yazd Regional Water Organization from 2005 to 2014. Using this data, the map components were plotted by Kriging geostatistical method. Then, the map of GQI was prepared after normalizing each map component, switching to a rating map, and extracting the weight of each component from the rating map. Based on the GQI index map, the index point which was 87 in 2005 has increased to 81 in 2014. These maps show a decline in groundwater quality from west to the east region. This decline in groundwater quality is due to the existence of Neogene Organizations in the east and geomorphologic unit of the bare epandage pediment in the west. The map removal and single-parameter sensitivity analysis showed that GQI index in Yazd-Ardakan plain is more sensitive to the components of electrical conductivity (EC, total dissolved solids (TDS, and total hardness (TH. Therefore, these components should be monitored more carefully and repeatedly.

Development of a quality-assessment tool for experimental bruxism studies: reliability and validity.

Science.gov (United States)

Dawson, Andreas; Raphael, Karen G; Glaros, Alan; Axelsson, Susanna; Arima, Taro; Ernberg, Malin; Farella, Mauro; Lobbezoo, Frank; Manfredini, Daniele; Michelotti, Ambra; Svensson, Peter; List, Thomas

2013-01-01

To combine empirical evidence and expert opinion in a formal consensus method in order to develop a quality-assessment tool for experimental bruxism studies in systematic reviews. Tool development comprised five steps: (1) preliminary decisions, (2) item generation, (3) face-validity assessment, (4) reliability and discriminitive validity assessment, and (5) instrument refinement. The kappa value and phi-coefficient were calculated to assess inter-observer reliability and discriminative ability, respectively. Following preliminary decisions and a literature review, a list of 52 items to be considered for inclusion in the tool was compiled. Eleven experts were invited to join a Delphi panel and 10 accepted. Four Delphi rounds reduced the preliminary tool-Quality-Assessment Tool for Experimental Bruxism Studies (Qu-ATEBS)- to 8 items: study aim, study sample, control condition or group, study design, experimental bruxism task, statistics, interpretation of results, and conflict of interest statement. Consensus among the Delphi panelists yielded good face validity. Inter-observer reliability was acceptable (k = 0.77). Discriminative validity was excellent (phi coefficient 1.0; P reviews of experimental bruxism studies, exhibits face validity, excellent discriminative validity, and acceptable inter-observer reliability. Development of quality assessment tools for many other topics in the orofacial pain literature is needed and may follow the described procedure.

An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys.

Science.gov (United States)

Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

2010-02-01

Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators-'household possession of any bednet' and 'household possession of any insecticide-treated bednet (ITN)'. As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices.

The Groundwater Performance Assessment Project Quality Assurance Plan

International Nuclear Information System (INIS)

Luttrell, Stuart P.

2006-01-01

U.S. Department of Energy (DOE) has monitored groundwater on the Hanford Site since the 1940s to help determine what chemical and radiological contaminants have made their way into the groundwater. As regulatory requirements for monitoring increased in the 1980s, there began to be some overlap between various programs. DOE established the Groundwater Performance Assessment Project (groundwater project) in 1996 to ensure protection of the public and the environment while improving the efficiency of monitoring activities. The groundwater project is designed to support all groundwater monitoring needs at the site, eliminate redundant sampling and analysis, and establish a cost-effective hierarchy for groundwater monitoring activities. This document provides the quality assurance guidelines that will be followed by the groundwater project. This QA Plan is based on the QA requirements of DOE Order 414.1C, Quality Assurance, and 10 CFR 830, Subpart A--General Provisions/Quality Assurance Requirements as delineated in Pacific Northwest National Laboratory's Standards-Based Management System. In addition, the groundwater project is subject to the Environmental Protection Agency (EPA) Requirements for Quality Assurance Project Plans (EPA/240/B-01/003, QA/R-5). The groundwater project has determined that the Hanford Analytical Services Quality Assurance Requirements Documents (HASQARD, DOE/RL-96-68) apply to portions of this project and to the subcontractors. HASQARD requirements are discussed within applicable sections of this plan

Quality Assessment in Oncology

International Nuclear Information System (INIS)

Albert, Jeffrey M.; Das, Prajnan

2012-01-01

The movement to improve healthcare quality has led to a need for carefully designed quality indicators that accurately reflect the quality of care. Many different measures have been proposed and continue to be developed by governmental agencies and accrediting bodies. However, given the inherent differences in the delivery of care among medical specialties, the same indicators will not be valid across all of them. Specifically, oncology is a field in which it can be difficult to develop quality indicators, because the effectiveness of an oncologic intervention is often not immediately apparent, and the multidisciplinary nature of the field necessarily involves many different specialties. Existing and emerging comparative effectiveness data are helping to guide evidence-based practice, and the increasing availability of these data provides the opportunity to identify key structure and process measures that predict for quality outcomes. The increasing emphasis on quality and efficiency will continue to compel the medical profession to identify appropriate quality measures to facilitate quality improvement efforts and to guide accreditation, credentialing, and reimbursement. Given the wide-reaching implications of quality metrics, it is essential that they be developed and implemented with scientific rigor. The aims of the present report were to review the current state of quality assessment in oncology, identify existing indicators with the best evidence to support their implementation, and propose a framework for identifying and refining measures most indicative of true quality in oncologic care.

Quality Assessment in Oncology

Energy Technology Data Exchange (ETDEWEB)

Albert, Jeffrey M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Das, Prajnan, E-mail: prajdas@mdanderson.org [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States)

2012-07-01

The movement to improve healthcare quality has led to a need for carefully designed quality indicators that accurately reflect the quality of care. Many different measures have been proposed and continue to be developed by governmental agencies and accrediting bodies. However, given the inherent differences in the delivery of care among medical specialties, the same indicators will not be valid across all of them. Specifically, oncology is a field in which it can be difficult to develop quality indicators, because the effectiveness of an oncologic intervention is often not immediately apparent, and the multidisciplinary nature of the field necessarily involves many different specialties. Existing and emerging comparative effectiveness data are helping to guide evidence-based practice, and the increasing availability of these data provides the opportunity to identify key structure and process measures that predict for quality outcomes. The increasing emphasis on quality and efficiency will continue to compel the medical profession to identify appropriate quality measures to facilitate quality improvement efforts and to guide accreditation, credentialing, and reimbursement. Given the wide-reaching implications of quality metrics, it is essential that they be developed and implemented with scientific rigor. The aims of the present report were to review the current state of quality assessment in oncology, identify existing indicators with the best evidence to support their implementation, and propose a framework for identifying and refining measures most indicative of true quality in oncologic care.

Influence of sample quality on phenylalanine and 17-hydroxyprogesterone levels in neonatal screening

OpenAIRE

del Río Fabre, Lesley; González, Ernesto C; Frómeta, Amarilys; Castells, Elisa M; Tejeda, Yileidis

2010-01-01

Quality of the sample and phenylalanine and 17-hydroxyprogesterone levels in neonatal screening. In the programs for neonatal screening many different analytes are quantified from dried blood on filter paper cards. Several factors affect the quality of the samples invalidating their employment in the laboratory: inadequate collection procedures, quality of the filter paper, the drying, storage and transportation under extreme environmental conditions. This article aims to show how the quality...

EPIDEMIOLOGI UNTUK 'QUALITY ASSESSMENT' PELAYANAN KESEHATAN GIGI MULUT

Directory of Open Access Journals (Sweden)

Zaura Anggraeni Matram

2015-08-01

Full Text Available The need for quality assessment and assurance in health and oral health becomes an issue of major concern in Indonesia, particularly in relation to the significant decrease of available resources due to the persistence economical crisis. Financial and socioeconomical impacts have led to the need for low cost - high quality accessible oral care. Dentists are ultimately responsibel for the quality of care performed in Public Helath Center (Puskesmas especially for School and Community Dental Programmes often performed by various type of health manpower such as dental nurses and cadres (volunteers. In this paper, emphasis has been placed on two epidemiological models to assess the quality of outcomes of service as well as management control for quality assessment in School Dental Programme. Respectively epidemiological moderls were developed for assessing the effectiveness of oral health education and simple oral prophylaxis carried out the School Dental Programme (known as UKGS. With these epidemiological approaches, it is hope dentists will gain increase appreciation for qualitative assessment quality of care instead of just quantitavely meeting the target that many health administrations use it to indicate success.

No-reference visual quality assessment for image inpainting

Science.gov (United States)

Voronin, V. V.; Frantc, V. A.; Marchuk, V. I.; Sherstobitov, A. I.; Egiazarian, K.

2015-03-01

Inpainting has received a lot of attention in recent years and quality assessment is an important task to evaluate different image reconstruction approaches. In many cases inpainting methods introduce a blur in sharp transitions in image and image contours in the recovery of large areas with missing pixels and often fail to recover curvy boundary edges. Quantitative metrics of inpainting results currently do not exist and researchers use human comparisons to evaluate their methodologies and techniques. Most objective quality assessment methods rely on a reference image, which is often not available in inpainting applications. Usually researchers use subjective quality assessment by human observers. It is difficult and time consuming procedure. This paper focuses on a machine learning approach for no-reference visual quality assessment for image inpainting based on the human visual property. Our method is based on observation that Local Binary Patterns well describe local structural information of the image. We use a support vector regression learned on assessed by human images to predict perceived quality of inpainted images. We demonstrate how our predicted quality value correlates with qualitative opinion in a human observer study. Results are shown on a human-scored dataset for different inpainting methods.

Oral health-related quality of life of a consecutive sample of Spanish dental patients

OpenAIRE

Montero Martín, Javier; Yarte, José María; Bravo Pérez, Manuel; López-Valverde Centeno, Antonio

2011-01-01

Objectives: Assessment of the oral health-related quality of life and the modulating factors of patients deman-- ding dental treatment in the city of Salamanca, through the use of two validated instruments: the OIDP-sp (Oral Impacts on Daily Performance) and OHIP-14 (Oral Health Impact Profile). Study design: the study was conducted on a consecutive sample of 200 patients aged 18-65 years visiting an Integral Dental Centre in the city of Salamanca. Two validated instruments (OIDP-sp and OHIP-...

Improving the Yield of Histological Sampling in Patients With Suspected Colorectal Cancer During Colonoscopy by Introducing a Colonoscopy Quality Assurance Program.

Science.gov (United States)

Gado, Ahmed; Ebeid, Basel; Abdelmohsen, Aida; Axon, Anthony

2011-08-01

Masses discovered by clinical examination, imaging or endoscopic studies that are suspicious for malignancy typically require biopsy confirmation before treatment is initiated. Biopsy specimens may fail to yield a definitive diagnosis if the lesion is extensively ulcerated or otherwise necrotic and viable tumor tissue is not obtained on sampling. The diagnostic yield is improved when multiple biopsy samples (BSs) are taken. A colonoscopy quality-assurance program (CQAP) was instituted in 2003 in our institution. The aim of this study was to determine the effect of instituting a CQAP on the yield of histological sampling in patients with suspected colorectal cancer (CRC) during colonoscopy. Initial assessment of colonoscopy practice was performed in 2003. A total of five patients with suspected CRC during colonoscopy were documented in 2003. BSs confirmed CRC in three (60%) patients and were nondiagnostic in two (40%). A quality-improvement process was instituted which required a minimum six BSs with adequate size of the samples from any suspected CRC during colonoscopy. A total of 37 patients for the period 2004-2010 were prospectively assessed. The diagnosis of CRC was confirmed with histological examination of BSs obtained during colonoscopy in 63% of patients in 2004, 60% in 2005, 50% in 2006, 67% in 2007, 100% in 2008, 67% in 2009 and 100% in 2010. The yield of histological sampling increased significantly ( p quality assurance and improvement program increased the yield of histological sampling in patients with suspected CRC during colonoscopy.

Towards web documents quality assessment for digital humanities scholars

NARCIS (Netherlands)

Ceolin, D.; Noordegraaf, Julia; Aroyo, L.M.; van Son, C.M.; Nejdl, Wolfgang; Hall, Wendy; Parigi, Paolo; Staab, Steffen

2016-01-01

We present a framework for assessing the quality of Web documents, and a baseline of three quality dimensions: trustworthiness, objectivity and basic scholarly quality. Assessing Web document quality is a "deep data" problem necessitating approaches to handle both data size and complexity.

Integrated assessment of river health based on the conditions of water quality,aquatic life and physical habitat

Institute of Scientific and Technical Information of China (English)

MENG Wei; ZHANG Nan; ZHANG Yuan; ZHENG Binghui

2009-01-01

The health conditions of Liao River were assessed using 25 sampling sites in April 2005, with water quality index, biotic index and physical habitat quality index.Based on the method of cluster analysis (CA) for water quality indices, it reveals that heavily polluted sites of Liao River are located at estuary and mainstream.The aquatic species surveyed were attached algae and benthic invertebrates.The result shows that the diversity and biomass of attached algae and benthic index of biotic integrity (B-IBI) are degrading as the chemical and physical quality of water bodies deteriorating.Physiochemical parameters, BOD5, CODCr, TN, TP, NH3-N, DO, petroleum hydrocarbon and conductivity, were statistically analyzed with principal component analysis and correlation analysis.The statistical results were incorporated into the integrated assessing water quality index, combining fecal coliform count, attached algae diversity, B-IBI and physical habitat quality score, a comprehensive integrated assessing system of river ecological health was established.Based on the systimetic assesment, the assessed sites are categorized into 9 "healthy" and "sub-healthy" sites and 8 "sub-sick" and "sick" sites.

Extending cluster lot quality assurance sampling designs for surveillance programs.

Science.gov (United States)

Hund, Lauren; Pagano, Marcello

2014-07-20

Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

Water-quality assessment of the Kentucky River basin, Kentucky; results of investigations of surface-water quality, 1987-90

Science.gov (United States)

Haag, K.H.; Garcia, Rene; Jarrett, G.L.; Porter, S.D.

1995-01-01

The U.S. Geological Survey investigated the water quality of the Kentucky River Basin in Kentucky as part of the National Water-Quality Assessment program. Data collected during 1987-90 were used to describe the spatial and temporal variability of water-quality constituents including metals and trace elements, nutrients, sediments, pesticides, dissolved oxygen, and fecal-coliform bacteria. Oil-production activities were the source of barium, bromide, chloride, magnesium, and sodium in several watersheds. High concentrations of aluminum, iron, and zinc were related to surface mining in the Eastern Coal Field Region. High concentrations of lead and zinc occurred in streambed sediments in urban areas, whereas concentrations of arsenic, strontium, and uranium were associated with natural geologic sources. Concentrations of phosphorus were significantly correlated with urban and agricultural land use. The high phosphorus content of Bluegrass Region soils was an important source of phosphorus in streams. At many sites in urban areas, most of the stream nitrogen load was attributable to wastewater-treatment-plant effluent. Average suspended-sediment concentrations were positively correlated with discharge. There was a downward trend in suspended-sediment concentrations downstream in the Kentucky River main stem during the study. The most frequently detected herbicides in water samples were atrazine, 2,4-D, alachlor, metolachlor, and dicamba. Diazinon, malathion, and parathion were the most frequently detected organophosphate insecticides in water samples. Detectable concentrations of aldrin, chlordane, DDT, DDE, dieldrin, endrin, endosulfan, heptachlor, and lindane were found in streambed-sediment samples. Dissolved-oxygen concentrations were sometimes below the minimum concentration needed to sustain aquatic life. At some sites, high concentrations of fecal-indicator bacteria were found and water samples did not meet sanitary water-quality criteria.

Validation of a combi oven cooking method for preparation of chicken breast meat for quality assessment.

Science.gov (United States)

Zhuang, H; Savage, E M

2008-10-01

Quality assessment results of cooked meat can be significantly affected by sample preparation with different cooking techniques. A combi oven is a relatively new cooking technique in the U.S. market. However, there was a lack of published data about its effect on quality measurements of chicken meat. Broiler breast fillets deboned at 24-h postmortem were cooked with one of the 3 methods to the core temperature of 80 degrees C. Cooking methods were evaluated based on cooking operation requirements, sensory profiles, Warner-Bratzler (WB) shear and cooking loss. Our results show that the average cooking time for the combi oven was 17 min compared with 31 min for the commercial oven method and 16 min for the hot water method. The combi oven did not result in a significant difference in the WB shear force values, although the cooking loss of the combi oven samples was significantly lower than the commercial oven and hot water samples. Sensory profiles of the combi oven samples did not significantly differ from those of the commercial oven and hot water samples. These results demonstrate that combi oven cooking did not significantly affect sensory profiles and WB shear force measurements of chicken breast muscle compared to the other 2 cooking methods. The combi oven method appears to be an acceptable alternative for preparing chicken breast fillets in a quality assessment.

Many quality measurements, but few quality measures assessing the quality of breast cancer care in women: a systematic review.

Science.gov (United States)

Schachter, Howard M; Mamaladze, Vasil; Lewin, Gabriela; Graham, Ian D; Brouwers, Melissa; Sampson, Margaret; Morrison, Andra; Zhang, Li; O'Blenis, Peter; Garritty, Chantelle

2006-12-18

Breast cancer in women is increasingly frequent, and care is complex, onerous and expensive, all of which lend urgency to improvements in care. Quality measurement is essential to monitor effectiveness and to guide improvements in healthcare. Ten databases, including Medline, were searched electronically to identify measures assessing the quality of breast cancer care in women (diagnosis, treatment, followup, documentation of care). Eligible studies measured adherence to standards of breast cancer care in women diagnosed with, or in treatment for, any histological type of adenocarcinoma of the breast. Reference lists of studies, review articles, web sites, and files of experts were searched manually. Evidence appraisal entailed dual independent assessments of data (e.g., indicators used in quality measurement). The extent of each quality indicator's scientific validation as a measure was assessed. The American Society of Clinical Oncology (ASCO) was asked to contribute quality measures under development. Sixty relevant reports identified 58 studies with 143 indicators assessing adherence to quality breast cancer care. A paucity of validated indicators (n = 12), most of which assessed quality of life, only permitted a qualitative data synthesis. Most quality indicators evaluated processes of care. While some studies revealed patterns of under-use of care, all adherence data require confirmation using validated quality measures. ASCO's current development of a set of quality measures relating to breast cancer care may hold the key to conducting definitive studies.

Feasibility of using of a simplified question in assessing diet quality of adolescents.

Science.gov (United States)

Rodrigues, Paulo Rogério Melo; Gonçalves-Silva, Regina Maria Veras; Ferreira, Márcia Gonçalves; Pereira, Rosangela Alves

2017-05-01

This study aims to analyze the applicability of a simplified question in assessing diet quality of adolescents in a cross-sectional school-based study carried out in a sample of high school students. Diet quality self-perception was obtained when the participant was inquired about own diet considering "excellent", "good", "fair" or "poor" responses. We evaluated meals habits and food intake through food frequency questionnaire. The revised version of the Brazilian Healthy Eating Index (BHEI-R) was estimated and we identified three dietary patterns using factor analysis. "Good" self-perceived diet quality was reported by 56% of adolescents and was associated with regular consumption of fruits and vegetables, meal profile and high healthy eating index scores. However, consumption of foods harmful to health was not perceived as characteristic that affects diet quality. The evaluated question showed sensitivity of 28% to detect good quality diets and specificity of 79% to identify low nutritional value diets. The use of a simplified question to assess dietary habits of adolescents is limited, since the consumption of high-fat, high-sugar and high-sodium food was not recognized as an indicator of low quality diet.

Quality-of-life assessment of family planning adopters through user perspectives in the district of Karimnagar

Directory of Open Access Journals (Sweden)

Kameswararao Avasarala

2009-01-01

Full Text Available Background: Small families adopting family planning are usually considered happy families. They are expected to lead a better qualitative life. Quality-of-life (QOL is routinely assessed for knowing patients′ health status. Recently, the QOL concept has become increasingly popular for evaluating the impact of public health interventions. Hitherto, QOL is usually assessed by means of program achievements or indicators, which may sometimes be misleading. Hence, the new culture of QOL assessment by means of user perspectives is now becoming popular. Research Questions: 1 Is the quality-of-life of family planning (FP adopters better than that of non-FP adopters? 2 Are the user perspectives helpful in QOL assessment? Materials and Methods: A cross-sectional descriptive study was carried out among 50 FP adopting families and 50 non-FP adopting families from the village of Vutoor and the city of Karimnagar in Andhra Pradesh. Sampling Methods: Random sampling, Proportions and Chi square test. Results: Program perspectives revealed a better standard of living for FP adopters because they have amenities like housing, television, and vehicles and less mortality and morbidity ( P < 0.001. However, they lack positive feelings towards life, general adaptation, personal relationships, and leisure opportunities. Finally, self-assessment by FP adopters themselves revealed no significant increase in their qualitative life after family planning ( P = 0.05. Conclusions: While assessing the impact of a health program on quality-of-life, multiple methods of assessments including user perspectives are better than program indicators alone.

Objective and Subjective Assessment of Digital Pathology Image Quality

Directory of Open Access Journals (Sweden)

Prarthana Shrestha

2015-03-01

Full Text Available The quality of an image produced by the Whole Slide Imaging (WSI scanners is of critical importance for using the image in clinical diagnosis. Therefore, it is very important to monitor and ensure the quality of images. Since subjective image quality assessments by pathologists are very time-consuming, expensive and difficult to reproduce, we propose a method for objective assessment based on clinically relevant and perceptual image parameters: sharpness, contrast, brightness, uniform illumination and color separation; derived from a survey of pathologists. We developed techniques to quantify the parameters based on content-dependent absolute pixel performance and to manipulate the parameters in a predefined range resulting in images with content-independent relative quality measures. The method does not require a prior reference model. A subjective assessment of the image quality is performed involving 69 pathologists and 372 images (including 12 optimal quality images and their distorted versions per parameter at 6 different levels. To address the inter-reader variability, a representative rating is determined as a one-tailed 95% confidence interval of the mean rating. The results of the subjective assessment support the validity of the proposed objective image quality assessment method to model the readers’ perception of image quality. The subjective assessment also provides thresholds for determining the acceptable level of objective quality per parameter. The images for both the subjective and objective quality assessment are based on the HercepTestTM slides scanned by the Philips Ultra Fast Scanners, developed at Philips Digital Pathology Solutions. However, the method is applicable also to other types of slides and scanners.

Quality control for measurement of soil samples containing 237Np and 241Am as radiotracer

International Nuclear Information System (INIS)

Sha Lianmao; Zhang Caihong; Song Hailong; Ren Xiaona; Han Yuhu; Zhang Aiming; Chu Taiwei

2003-01-01

This paper reports quality control (QC) for the measurement of soil samples containing 237 Np and 241 Am as radiotracers in migration test of transuranic nuclides. All of the QC were done independently by the QA members of analytical work. It mainly included checking 5%-10% of the total analyzed samples; preparing blank samples, blind replicate sample and spiked samples used as quality control samples to check the quality of analytical work

Quality Assessment of Family Planning Sterilization Services at Health Care Facilities: Case Record Audit.

Science.gov (United States)

Mathur, Medha; Goyal, Ram Chandra; Mathur, Navgeet

2017-05-01

Quality of sterilization services is a matter of concern in India because population control is a necessity. Family Planning Sterilization (FPS) services provided at public health care facilities need to be as per Standard Operating Procedures. To assess the quality of FPS services by audit of case records at selected health care facilities. This cross-sectional study was conducted for two and a half year duration at selected public health care facilities of central India by simple random sampling where FPS services were provided. As per the standards of Government of India, case records were audited and compliance was calculated to assess the quality of services. Results of record audit were satisfactory but important criteria like previous contraceptive history and postoperative counselling were found to be deviated from standards. At Primary Health Centres (PHCs) only 89.5% and at Community Health Centres (CHCs) 58.7% of records were having details of previous contraceptive history. Other criteria like mental illness (only 70% at CHCs) assessment were also inadequate. Although informed consent was found to be having 100% compliance in all records. Quality of care in FPS services is the matter of concern in present scenario for better quality of services. This study may enlighten the policy makers regarding improvements needed for providing quality care.

Computer graphics for quality control in the INAA of geological samples

Science.gov (United States)

Grossman, J.N.; Baedecker, P.A.

1987-01-01

A data reduction system for the routine instrumental activation analysis of samples is described, with particular emphasis on interactive graphics capabilities for evaluating analytical quality. Graphics procedures have been developed to interactively control the analysis of selected photopeaks during spectral analysis, and to evaluate detector performance during a given counting cycle. Graphics algorithms are also used to compare the data on reference samples with accepted values, to prepare quality control charts to evaluate long term precision and to search for systematic variations in data on reference samples as a function of time. ?? 1987 Akade??miai Kiado??.

Blood venous sample collection: Recommendations overview and a checklist to improve quality.

Science.gov (United States)

Giavarina, Davide; Lippi, Giuseppe

2017-07-01

The extra-analytical phases of the total testing process have substantial impact on managed care, as well as an inherent high risk of vulnerability to errors which is often greater than that of the analytical phase. The collection of biological samples is a crucial preanalytical activity. Problems or errors occurring shortly before, or soon after, this preanalytical step may impair sample quality and characteristics, or else modify the final results of testing. The standardization of fasting requirements, rest, patient position and psychological state of the patient are therefore crucial for mitigating the impact of preanalytical variability. Moreover, the quality of materials used for collecting specimens, along with their compatibility, can guarantee sample quality and persistence of chemical and physical characteristics of the analytes over time, so safeguarding the reliability of testing. Appropriate techniques and sampling procedures are effective to prevent problems such as hemolysis, undue clotting in the blood tube, draw of insufficient sample volume and modification of analyte concentration. An accurate identification of both patient and blood samples is a key priority as for other healthcare activities. Good laboratory practice and appropriate training of operators, by specifically targeting collection of biological samples, blood in particular, may greatly improve this issue, thus lowering the risk of errors and their adverse clinical consequences. The implementation of a simple and rapid check-list, including verification of blood collection devices, patient preparation and sampling techniques, was found to be effective for enhancing sample quality and reducing some preanalytical errors associated with these procedures. The use of this tool, along with implementation of objective and standardized systems for detecting non-conformities related to unsuitable samples, can be helpful for standardizing preanalytical activities and improving the quality of

Rapid quality assessment of Radix Aconiti Preparata using direct analysis in real time mass spectrometry.

Science.gov (United States)

Zhu, Hongbin; Wang, Chunyan; Qi, Yao; Song, Fengrui; Liu, Zhiqiang; Liu, Shuying

2012-11-08

This study presents a novel and rapid method to identify chemical markers for the quality control of Radix Aconiti Preparata, a world widely used traditional herbal medicine. In the method, the samples with a fast extraction procedure were analyzed using direct analysis in real time mass spectrometry (DART MS) combined with multivariate data analysis. At present, the quality assessment approach of Radix Aconiti Preparata was based on the two processing methods recorded in Chinese Pharmacopoeia for the purpose of reducing the toxicity of Radix Aconiti and ensuring its clinical therapeutic efficacy. In order to ensure the safety and effectivity in clinical use, the processing degree of Radix Aconiti should be well controlled and assessed. In the paper, hierarchical cluster analysis and principal component analysis were performed to evaluate the DART MS data of Radix Aconiti Preparata samples in different processing times. The results showed that the well processed Radix Aconiti Preparata, unqualified processed and the raw Radix Aconiti could be clustered reasonably corresponding to their constituents. The loading plot shows that the main chemical markers having the most influence on the discrimination amongst the qualified and unqualified samples were mainly some monoester diterpenoid aconitines and diester diterpenoid aconitines, i.e. benzoylmesaconine, hypaconitine, mesaconitine, neoline, benzoylhypaconine, benzoylaconine, fuziline, aconitine and 10-OH-mesaconitine. The established DART MS approach in combination with multivariate data analysis provides a very flexible and reliable method for quality assessment of toxic herbal medicine. Copyright © 2012 Elsevier B.V. All rights reserved.

Water quality in Atlantic rainforest mountain rivers (South America): quality indices assessment, nutrients distribution, and consumption effect.

Science.gov (United States)

Avigliano, Esteban; Schenone, Nahuel

2016-08-01

The South American Atlantic rainforest is a one-of-a-kind ecosystem considered as a biodiversity hotspot; however, in the last decades, it was intensively reduced to 7 % of its original surface. Water resources and water quality are one of the main goods and services this system provides to people. For monitoring and management recommendations, the present study is focused on (1) determining the nutrient content (nitrate, nitrite, ammonium, and phosphate) and physiochemical parameters (temperature, pH, electrical conductivity, turbidity, dissolved oxygen, and total dissolved solids) in surface water from 24 rainforest mountain rivers in Argentina, (2) analyzing the human health risk, (3) assessing the environmental distribution of the determined pollutants, and (4) analyzing water quality indices (WQIobj and WQImin). In addition, for total coliform bacteria, a dataset was used from literature. Turbidity, total dissolved solids, and nitrite (NO2 (-)) exceeded the guideline value recommended by national or international guidelines in several sampling stations. The spatial distribution pattern was analyzed by Principal Component Analysis and Factor Analysis (PCA/FA) showing well-defined groups of rivers. Both WQI showed good adjustment (R (2) = 0.89) and rated water quality as good or excellent in all sampling sites (WQI > 71). Therefore, this study suggests the use of the WQImin for monitoring water quality in the region and also the water treatment of coliform, total dissolved solids, and turbidity.

Total Quality Management of Information System for Quality Assessment of Pesantren Using Fuzzy-SERVQUAL

Science.gov (United States)

Faizah, Arbiati; Syafei, Wahyul Amien; Isnanto, R. Rizal

2018-02-01

This research proposed a model combining an approach of Total Quality Management (TQM) and Fuzzy method of Service Quality (SERVQUAL) to asses service quality. TQM implementation was as quality management orienting on customer's satisfaction by involving all stakeholders. SERVQUAL model was used to measure quality service based on five dimensions such as tangible, reliability, responsiveness, assurance, and empathy. Fuzzy set theory was to accommodate subjectivity and ambiguity of quality assessment. Input data consisted of indicator data and quality assessment aspect. Input data was, then, processed to be service quality assessment questionnaires of Pesantren by using Fuzzy method to get service quality score. This process consisted of some steps as follows : inputting dimension and questionnaire data to data base system, filling questionnaire through system, then, system calculated fuzzification, defuzzification, gap of quality expected and received by service receivers, and calculating each dimension rating showing quality refinement priority. Rating of each quality dimension was, then, displayed at dashboard system to enable users to see information. From system having been built, it could be known that tangible dimension had the highest gap, -0.399, thus it needs to be prioritized and gets evaluation and refinement action soon.

Assessment of long-term gas sampling design at two commercial manure-belt layer barns.

Science.gov (United States)

Chai, Li-Long; Ni, Ji-Qin; Chen, Yan; Diehl, Claude A; Heber, Albert J; Lim, Teng T

2010-06-01

Understanding temporal and spatial variations of aerial pollutant concentrations is important for designing air quality monitoring systems. In long-term and continuous air quality monitoring in large livestock and poultry barns, these systems usually use location-shared analyzers and sensors and can only sample air at limited number of locations. To assess the validity of the gas sampling design at a commercial layer farm, a new methodology was developed to map pollutant gas concentrations using portable sensors under steady-state or quasi-steady-state barn conditions. Three assessment tests were conducted from December 2008 to February 2009 in two manure-belt layer barns. Each barn was 140.2 m long and 19.5 m wide and had 250,000 birds. Each test included four measurements of ammonia and carbon dioxide concentrations at 20 locations that covered all operating fans, including six of the fans used in the long-term sampling that represented three zones along the lengths of the barns, to generate data for complete-barn monitoring. To simulate the long-term monitoring, gas concentrations from the six long-term sampling locations were extracted from the 20 assessment locations. Statistical analyses were performed to test the variances (F-test) and sample means (t test) between the 6- and 20-sample data. The study clearly demonstrated ammonia and carbon dioxide concentration gradients that were characterized by increasing concentrations from the west to east ends of the barns following the under-cage manure-belt travel direction. Mean concentrations increased from 7.1 to 47.7 parts per million (ppm) for ammonia and from 2303 to 3454 ppm for carbon dioxide from the west to east of the barns. Variations of mean gas concentrations were much less apparent between the south and north sides of the barns, because they were 21.2 and 20.9 ppm for ammonia and 2979 and 2951 ppm for carbon dioxide, respectively. The null hypotheses that the variances and means between the 6- and 20

An assessment of quality of water from boreholes in Bindura District, Zimbabwe

Science.gov (United States)

Hoko, Zvikomborero

This study assessed the water quality of 144 boreholes in Bindura District in Mashonaland Province of Zimbabwe as part of a borehole rehabilitation project implemented by a local NGO. In previous studies it has been observed that some boreholes are not used for domestic purposes because of consumer perceived poor water quality. Consequently, communities have resorted to unsafe alternative water sources thus creating health risks. The study was carried out in June 2005. The objectives of the study were to assess the levels of parameters associated with the aesthetics of the water and to compare them with guideline values for drinking water. The study also investigated the relationship between some of the measured water quality and the consumer perceived water quality. Measured water quality parameters included pH, temperature, electrical conductivity (EC), turbidity, calcium (Ca), magnesium (Mg) and iron (Fe). All parameters were measured in the field except Ca, Mg and Fe, which were measured in a laboratory using a spectrophotometer. Consumer perceptions on water quality were investigated through interviews with the consumer community. Turbidity was found to be 0.75-428(20.8 ± 59.2; n = 144) NTU, pH 5.7-9.3 (6.88 ± 0.46; n = 144), temperature 18-26.8 (22.6 ± 2.1; n = 144) °C. EC 26-546 (199 ± 116; n = 144) μS/cm, Ca 6-71.6 (26.9 ± 14.1; n = 81) mg/l, Mg 1.2-49.6 (12.3 ± 10.0; n = 81) mg/l and Fe 0.08-9.60 (0.56 ± 1.15; n = 81) mg/l. Some 23% of the samples had pH outside the recommended range of 6.5-8.5, whilst 59% of the samples had turbidity values exceeding the 5NTU WHO limit. For EC, all samples had values less than the WHO derived limit of 1380 μS/cm. All Ca and magnesium values were within the common and recommended levels of 100 mg/l and 70 mg/l respectively. Iron had values greater than the WHO and SAZ limit of 0.3 mg/l in 36% of the samples. Water quality was deemed satisfactory for taste and soap consumption by 95% and 72% of the respondents

Many quality measurements, but few quality measures assessing the quality of breast cancer care in women: A systematic review

Directory of Open Access Journals (Sweden)

Zhang Li

2006-12-01

Full Text Available Abstract Background Breast cancer in women is increasingly frequent, and care is complex, onerous and expensive, all of which lend urgency to improvements in care. Quality measurement is essential to monitor effectiveness and to guide improvements in healthcare. Methods Ten databases, including Medline, were searched electronically to identify measures assessing the quality of breast cancer care in women (diagnosis, treatment, followup, documentation of care. Eligible studies measured adherence to standards of breast cancer care in women diagnosed with, or in treatment for, any histological type of adenocarcinoma of the breast. Reference lists of studies, review articles, web sites, and files of experts were searched manually. Evidence appraisal entailed dual independent assessments of data (e.g., indicators used in quality measurement. The extent of each quality indicator's scientific validation as a measure was assessed. The American Society of Clinical Oncology (ASCO was asked to contribute quality measures under development. Results Sixty relevant reports identified 58 studies with 143 indicators assessing adherence to quality breast cancer care. A paucity of validated indicators (n = 12, most of which assessed quality of life, only permitted a qualitative data synthesis. Most quality indicators evaluated processes of care. Conclusion While some studies revealed patterns of under-use of care, all adherence data require confirmation using validated quality measures. ASCO's current development of a set of quality measures relating to breast cancer care may hold the key to conducting definitive studies.

Post-traumatic stress syndrome in a large sample of older adults: determinants and quality of life.

Science.gov (United States)

Lamoureux-Lamarche, Catherine; Vasiliadis, Helen-Maria; Préville, Michel; Berbiche, Djamal

2016-01-01

The aims of this study are to assess in a sample of older adults consulting in primary care practices the determinants and quality of life associated with post-traumatic stress syndrome (PTSS). Data used came from a large sample of 1765 community-dwelling older adults who were waiting to receive health services in primary care clinics in the province of Quebec. PTSS was measured with the PTSS scale. Socio-demographic and clinical characteristics were used as potential determinants of PTSS. Quality of life was measured with the EuroQol-5D-3L (EQ-5D-3L) EQ-Visual Analog Scale and the Satisfaction With Your Life Scale. Multivariate logistic and linear regression models were used to study the presence of PTSS and different measures of health-related quality of life and quality of life as a function of study variables. The six-month prevalence of PTSS was 11.0%. PTSS was associated with age, marital status, number of chronic disorders and the presence of an anxiety disorder. PTSS was also associated with the EQ-5D-3L and the Satisfaction with Your Life Scale. PTSS is prevalent in patients consulting in primary care practices. Primary care physicians should be aware that PTSS is also associated with a decrease in quality of life, which can further negatively impact health status.

Daily Encounter Cards-Evaluating the Quality of Documented Assessments.

Science.gov (United States)

Cheung, Warren J; Dudek, Nancy; Wood, Timothy J; Frank, Jason R

2016-10-01

Concerns over the quality of work-based assessment (WBA) completion has resulted in faculty development and rater training initiatives. Daily encounter cards (DECs) are a common form of WBA used in ambulatory care and shift work settings. A tool is needed to evaluate initiatives aimed at improving the quality of completion of this widely used form of WBA. The completed clinical evaluation report rating (CCERR) was designed to provide a measure of the quality of documented assessments on in-training evaluation reports. The purpose of this study was to provide validity evidence to support using the CCERR to assess the quality of DEC completion. Six experts in resident assessment grouped 60 DECs into 3 quality categories (high, average, and poor) based on how informative each DEC was for reporting judgments of the resident's performance. Eight supervisors (blinded to the expert groupings) scored the 10 most representative DECs in each group using the CCERR. Mean scores were compared to determine if the CCERR could discriminate based on DEC quality. Statistically significant differences in CCERR scores were observed between all quality groups ( P  evaluate DEC quality. It can serve as an outcome measure for studying interventions targeted at improving the quality of assessments documented on DECs.

Mercury analysis in hair: Comparability and quality assessment within the transnational COPHES/DEMOCOPHES project.

Science.gov (United States)

Esteban, Marta; Schindler, Birgit Karin; Jiménez, José Antonio; Koch, Holger Martin; Angerer, Jürgen; Rosado, Montserrat; Gómez, Silvia; Casteleyn, Ludwine; Kolossa-Gehring, Marike; Becker, Kerstin; Bloemen, Louis; Schoeters, Greet; Den Hond, Elly; Sepai, Ovnair; Exley, Karen; Horvat, Milena; Knudsen, Lisbeth E; Joas, Anke; Joas, Reinhard; Aerts, Dominique; Biot, Pierre; Borošová, Daniela; Davidson, Fred; Dumitrascu, Irina; Fischer, Marc E; Grander, Margaretha; Janasik, Beata; Jones, Kate; Kašparová, Lucie; Larssen, Thorjørn; Naray, Miklos; Nielsen, Flemming; Hohenblum, Philipp; Pinto, Rui; Pirard, Catherine; Plateel, Gregory; Tratnik, Janja Snoj; Wittsiepe, Jürgen; Castaño, Argelia

2015-08-01

Human biomonitoring (HBM) is an effective tool for assessing actual exposure to chemicals that takes into account all routes of intake. Although hair analysis is considered to be an optimal biomarker for assessing mercury exposure, the lack of harmonization as regards sampling and analytical procedures has often limited the comparison of data at national and international level. The European-funded projects COPHES and DEMOCOPHES developed and tested a harmonized European approach to Human Biomonitoring in response to the European Environment and Health Action Plan. Herein we describe the quality assurance program (QAP) for assessing mercury levels in hair samples from more than 1800 mother-child pairs recruited in 17 European countries. To ensure the comparability of the results, standard operating procedures (SOPs) for sampling and for mercury analysis were drafted and distributed to participating laboratories. Training sessions were organized for field workers and four external quality-assessment exercises (ICI/EQUAS), followed by the corresponding web conferences, were organized between March 2011 and February 2012. ICI/EQUAS used native hair samples at two mercury concentration ranges (0.20-0.71 and 0.80-1.63) per exercise. The results revealed relative standard deviations of 7.87-13.55% and 4.04-11.31% for the low and high mercury concentration ranges, respectively. A total of 16 out of 18 participating laboratories the QAP requirements and were allowed to analyze samples from the DEMOCOPHES pilot study. Web conferences after each ICI/EQUAS revealed this to be a new and effective tool for improving analytical performance and increasing capacity building. The procedure developed and tested in COPHES/DEMOCOPHES would be optimal for application on a global scale as regards implementation of the Minamata Convention on Mercury. Copyright © 2014 Elsevier Inc. All rights reserved.

Characterizing sampling and quality screening biases in infrared and microwave limb sounding

Science.gov (United States)

Millán, Luis F.; Livesey, Nathaniel J.; Santee, Michelle L.; von Clarmann, Thomas

2018-03-01

This study investigates orbital sampling biases and evaluates the additional impact caused by data quality screening for the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) and the Aura Microwave Limb Sounder (MLS). MIPAS acts as a proxy for typical infrared limb emission sounders, while MLS acts as a proxy for microwave limb sounders. These biases were calculated for temperature and several trace gases by interpolating model fields to real sampling patterns and, additionally, screening those locations as directed by their corresponding quality criteria. Both instruments have dense uniform sampling patterns typical of limb emission sounders, producing almost identical sampling biases. However, there is a substantial difference between the number of locations discarded. MIPAS, as a mid-infrared instrument, is very sensitive to clouds, and measurements affected by them are thus rejected from the analysis. For example, in the tropics, the MIPAS yield is strongly affected by clouds, while MLS is mostly unaffected. The results show that upper-tropospheric sampling biases in zonally averaged data, for both instruments, can be up to 10 to 30 %, depending on the species, and up to 3 K for temperature. For MIPAS, the sampling reduction due to quality screening worsens the biases, leading to values as large as 30 to 100 % for the trace gases and expanding the 3 K bias region for temperature. This type of sampling bias is largely induced by the geophysical origins of the screening (e.g. clouds). Further, analysis of long-term time series reveals that these additional quality screening biases may affect the ability to accurately detect upper-tropospheric long-term changes using such data. In contrast, MLS data quality screening removes sufficiently few points that no additional bias is introduced, although its penetration is limited to the upper troposphere, while MIPAS may cover well into the mid-troposphere in cloud-free scenarios. We emphasize that the

lessons and challenges from software quality assessment

African Journals Online (AJOL)

DJFLEX

www.globaljournalseries.com, Email: info@globaljournalseries.com ... ASSESSMENT: THE CASE OF SPACE SYSTEMS SOFTWARE. ... KEYWORDS: Software, Software Quality ,Quality Standard, Characteristics, ... and communication, etc.

Building quality into performance and safety assessment software

International Nuclear Information System (INIS)

Wojciechowski, L.C.

2011-01-01

Quality assurance is integrated throughout the development lifecycle for performance and safety assessment software. The software used in the performance and safety assessment of a Canadian deep geological repository (DGR) follows the CSA quality assurance standard CSA-N286.7 [1], Quality Assurance of Analytical, Scientific and Design Computer Programs for Nuclear Power Plants. Quality assurance activities in this standard include tasks such as verification and inspection; however, much more is involved in producing a quality software computer program. The types of errors found with different verification methods are described. The integrated quality process ensures that defects are found and corrected as early as possible. (author)

Sampling in Qualitative Research: Improving the Quality of ...

African Journals Online (AJOL)

Sampling consideration in qualitative research is very important, yet in practice this appears not to be given the prominence and the rigour it deserves among Higher Education researchers. Accordingly, the quality of research outcomes in Higher Education has suffered from low utilisation. This has motivated the production ...

Assessing quality in cardiac surgery

Directory of Open Access Journals (Sweden)

Samer A.M. Nashef

2005-07-01

Full Text Available There is a the strong temporal, if not causal, link between the intervention and the outcome in cardiac surgery and therefore a link becomes established between operative mortality and the measurement of surgical performance. In Britain the law stipulates that data collected by any public body or using public funds must be made freely available. Tools and mechanisms we devise and develop are likely to form the models on which the quality of care is assessed in other surgical and perhaps medical specialties. Measuring professional performance should be done by the profession. To measure risk there are a number of scores as crude mortality is not enough. A very important benefit of assessing the risk of death is to use this knowledge in the determination of the indication to operate. The second benefit is in the assessment of the quality of care as risk prediction gives a standard against performance of hospitals and surgeons. Peer review and “naming and shaming” are two mechanisms to monitor quality. There are two potentially damaging outcomes from the publication of results in a league-table form: the first is the damage to the hospital; the second is to refuse to operate on high-risk patients. There is a real need for quality monitoring in medicine in general and in cardiac surgery in particular. Good quality surgical work requires robust knowledge of three crucial variables: activity, risk prediction and performance. In Europe, the three major specialist societies have agreed to establish the European Cardiovascular and Thoracic Surgery Institute of Accreditation (ECTSIA. Performance monitoring is soon to become imperative. If we surgeons are not on board, we shall have no control on its final destination, and the consequences may be equally damaging to us and to our patients.

Product analysis and initial reliability testing of the total mesorectal excision-quality assessment instrument.

Science.gov (United States)

Simunovic, Marko R; DeNardi, Franco G; Coates, Angela J; Szalay, David A; Eva, Kevin W

2014-07-01

Product analysis of rectal cancer resection specimens before specimen fixation may provide an immediate and relevant evaluation of surgical performance. We tested the interrater reliability (IRR) of a product analysis tool called the Total Mesorectal Excision-Quality Assessment Instrument (TME-QA). Participants included two gold standard raters, five pathology assistants, and eight pathologists. Domains of the TME-QA reflect total mesorectal excision principles including: (1) completeness of mesorectal margin; (2) completeness of mesorectum; (3) coning of distal mesorectum; (4) physical defects; and (5) overall specimen quality. Specimens were scored independently. We used the generalizability theory to assess the tool's internal consistency and IRR. There were 39 specimens and 120 ratings. Mean overall specimen quality scores for the gold standard raters, pathologists, and assistants were 4.43, 4.43, and 4.50, respectively (p > 0.85). IRR for the first nine items was 0.68 for the full sample, 0.62 for assistants alone, 0.63 for pathologists alone, and 0.74 for gold standard raters alone. IRR for the item overall specimen quality was 0.67 for the full sample, 0.45 for assistants, 0.80 for pathologists, and 0.86 for gold standard raters. IRR increased for all groups when scores were averaged across two raters. Assessment of surgical specimens using the TME-QA may provide rapid and relevant feedback to surgeons about their technical performance. Our results show good internal consistency and IRR when the TME-QA is used by pathologists. However, for pathology assistants, multiple ratings with the averaging of scores may be needed.

Assessing website pharmacy drug quality: safer than you think?

Directory of Open Access Journals (Sweden)

Roger Bate

Full Text Available BACKGROUND: Internet-sourced drugs are often considered suspect. The World Health Organization reports that drugs from websites that conceal their physical address are counterfeit in over 50 percent of cases; the U.S. Food and Drug Administration (FDA works with the National Association of Boards of Pharmacy (NABP to regularly update a list of websites likely to sell drugs that are illegal or of questionable quality. METHODS AND FINDINGS: This study examines drug purchasing over the Internet, by comparing the sales of five popular drugs from a selection of websites stratified by NABP or other ratings. The drugs were assessed for price, conditions of purchase, and basic quality. Prices and conditions of purchase varied widely. Some websites advertised single pills while others only permitted the purchase of large quantities. Not all websites delivered the exact drugs ordered, some delivered no drugs at all; many websites shipped from multiple international locations, and from locations that were different from those advertised on the websites. All drug samples were tested against approved U.S. brand formulations using Raman spectrometry. Many (17 websites substituted drugs, often in different formulations from the brands requested. These drugs, some of which were probably generics or perhaps non-bioequivalent copy versions, could not be assessed accurately. Of those drugs that could be assessed, none failed from "approved", "legally compliant" or "not recommended" websites (0 out of 86, whereas 8.6% (3 out of 35 failed from "highly not recommended" and unidentifiable websites. CONCLUSIONS: Of those drugs that could be assessed, all except Viagra(R passed spectrometry testing. Of those that failed, few could be identified either by a country of manufacture listed on the packaging, or by the physical location of the website pharmacy. If confirmed by future studies on other drug samples, then U.S. consumers should be able to reduce their risk by

Doctors or technicians: assessing quality of medical education

Directory of Open Access Journals (Sweden)

Tayyab Hasan

2010-09-01

Full Text Available Tayyab HasanPAPRSB Institute of Health Sciences, University Brunei Darussalam, Bandar Seri Begawan, BruneiAbstract: Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products.Keywords: educational quality, medical education, quality control, quality assessment, quality management models

Food quality assessment in parent–child dyads

DEFF Research Database (Denmark)

Bech-Larsen, Tino; Jensen, Birger Boutrup

2011-01-01

When the buyer and the consumer of a food product are not identical, the risk of discrepancies between food quality expectations and experience is even higher than when the buyer is also the consumer. In such situations the interpersonal aspects of food quality formation become the focus...... of attention. The purpose of this article is to discuss the interpersonal aspects of food quality formation, and to explore these in the context of parents buying new types of healthier in-between meals for their children. To pursue this we introduce the concept of dyadic quality assessment and apply...... parental knowledge of their children’s quality assessments significantly affect the willingness to pay. Accordingly, interaction between parents and children should be promoted when developing, testing and marketing new and healthier food products for children....

Capture and exploration of sample quality data to inform and improve the management of a screening collection.

Science.gov (United States)

Charles, Isabel; Sinclair, Ian; Addison, Daniel H

2014-04-01

A new approach to the storage, processing, and interrogation of the quality data for screening samples has improved analytical throughput and confidence and enhanced the opportunities for learning from the accumulating records. The approach has entailed the design, development, and implementation of a database-oriented system, capturing information from the liquid chromatography-mass spectrometry capabilities used for assessing the integrity of samples in AstraZeneca's screening collection. A Web application has been developed to enable the visualization and interactive annotation of the analytical data, monitor the current sample queue, and report the throughput rate. Sample purity and identity are certified automatically on the chromatographic peaks of interest if predetermined thresholds are reached on key parameters. Using information extracted in parallel from the compound registration and container inventory databases, the chromatographic and spectroscopic profiles for each vessel are linked to the sample structures and storage histories. A search engine facilitates the direct comparison of results for multiple vessels of the same or similar compounds, for single vessels analyzed at different time points, or for vessels related by their origin or process flow. Access to this network of information has provided a deeper understanding of the multiple factors contributing to sample quality assurance.

Audiovisual quality assessment and prediction for videotelephony

CERN Document Server

Belmudez, Benjamin

2015-01-01

The work presented in this book focuses on modeling audiovisual quality as perceived by the users of IP-based solutions for video communication like videotelephony. It also extends the current framework for the parametric prediction of audiovisual call quality. The book addresses several aspects related to the quality perception of entire video calls, namely, the quality estimation of the single audio and video modalities in an interactive context, the audiovisual quality integration of these modalities and the temporal pooling of short sample-based quality scores to account for the perceptual quality impact of time-varying degradations.

Quality assurance techniques for activation analysis

International Nuclear Information System (INIS)

Becker, D.A.

1984-01-01

The principles and techniques of quality assurance are applied to the measurement method of activation analysis. Quality assurance is defined to include quality control and quality assessment. Plans for quality assurance include consideration of: personnel; facilities; analytical design; sampling and sample preparation; the measurement process; standards; and documentation. Activation analysis concerns include: irradiation; chemical separation; counting/detection; data collection, and analysis; and calibration. Types of standards discussed include calibration materials and quality assessment materials

Quality of life assessment in intellectual disabilities: the Escala Pessoal de Resultados versus the World Health Quality of Life-BREF.

Science.gov (United States)

Simões, Cristina; Santos, Sofia; Claes, Claudia

2015-02-01

The aim of this study is to compare the applications of the Escala Pessoal de Resultados (EPR) and the World Health Quality of Life-BREF (WHOQOL-BREF) in quality of life (QOL) assessment of people with intellectual disabilities (ID). A total of 216 adults with ID were assessed (age ranging from 18 to 64 years; 128 people were diagnosed with mild, and 88 with moderate ID). The two scales were administered to each person to obtain their perception about their QOL. Statistically significant correlations (weak to moderate) were observed between both scales. The EPR and the WHOQOL-BREF demonstrated adequate reliability, construct, and discriminant validity in our sample. However, the group of adults with moderate ID scored higher on the WHOQOL-BREF than on the EPR. Results indicated that the two assessment instruments aim to evaluate different measures, and seem to be not interchangeable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Predicting personal preferences in subjective video quality assessment

DEFF Research Database (Denmark)

Korhonen, Jari

2017-01-01

In this paper, we study the problem of predicting the visual quality of a specific test sample (e.g. a video clip) experienced by a specific user, based on the ratings by other users for the same sample and the same user for other samples. A simple linear model and algorithm is presented, where...... the characteristics of each test sample are represented by a set of parameters, and the individual preferences are represented by weights for the parameters. According to the validation experiment performed on public visual quality databases annotated with raw individual scores, the proposed model can predict...

Semi-annual report of the Department of Energy, Office of Environmental Restoration and Waste Management, Quality Assessment Program

International Nuclear Information System (INIS)

Sanderson, C.G.; Scarpitta, S.C.

1992-01-01

This report presents the results from the analysis of the 36th set of environmental quality assessment samples (QAP 36) that were received on or before January 2, 1992. This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are complied with EML's results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 3 days after the reporting deadline via a modem-telephone connection to the EML computer

Semi-annual report of the Department of Energy, Office of Environmental Restoration and Waste Management, Quality Assessment Program

International Nuclear Information System (INIS)

Sanderson, C.G.; Klusek, C.S.

1993-01-01

This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML's results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 3 days after the reporting deadline via a modem-telephone connection to the EML computer. This report presents the results from the analysis of the 38th set of environmental quality assessment samples (QAP XXXVIII) that were received on or before June 2, 1993

Balancing Attended and Global Stimuli in Perceived Video Quality Assessment

DEFF Research Database (Denmark)

You, Junyong; Korhonen, Jari; Perkis, Andrew

2011-01-01

. This paper proposes a quality model based on the late attention selection theory, assuming that the video quality is perceived via two mechanisms: global and local quality assessment. First we model several visual features influencing the visual attention in quality assessment scenarios to derive......The visual attention mechanism plays a key role in the human perception system and it has a significant impact on our assessment of perceived video quality. In spite of receiving less attention from the viewers, unattended stimuli can still contribute to the understanding of the visual content...... an attention map using appropriate fusion techniques. The global quality assessment as based on the assumption that viewers allocate their attention equally to the entire visual scene, is modeled by four carefully designed quality features. By employing these same quality features, the local quality model...

Sperm quality assessment via separation and sedimentation in a microfluidic device.

Science.gov (United States)

Chen, Chang-Yu; Chiang, Tsun-Chao; Lin, Cheng-Ming; Lin, Shu-Sheng; Jong, De-Shien; Tsai, Vincent F-S; Hsieh, Ju-Ton; Wo, Andrew M

2013-09-07

A major reason for infertility is due to male factors, including the quality of spermatozoa, which is a primary factor and often difficult to assess, particularly the total sperm concentration and its motile percentage. This work presents a simple microfluidic device to assess sperm quality by quantifying both total and motile sperm counts. The key design feature of the microfluidic device is two channels separated by a permeative phase-guide structure, where one channel is filled with raw semen and the other with pure buffer. The semen sample was allowed to reach equilibrium in both chambers, whereas non-motile sperms remained in the original channel, and roughly half of the motile sperms would swim across the phase-guide barrier into the buffer channel. Sperms in each channel agglomerated into pellets after centrifugation, with the corresponding area representing total and motile sperm concentrations. Total sperm concentration up to 10(8) sperms per ml and motile percentage in the range of 10-70% were tested, encompassing the cutoff value of 40% stated by World Health Organization standards. Results from patient samples show compact and robust pellets after centrifugation. Comparison of total sperm concentration between the microfluidic device and the Makler chamber reveal they agree within 5% and show strong correlation, with a coefficient of determination of R(2) = 0.97. Motile sperm count between the microfluidic device and the Makler chamber agrees within 5%, with a coefficient of determination of R(2) = 0.84. Comparison of results from the Makler Chamber, sperm quality analyzer, and the microfluidic device revealed that results from the microfluidic device agree well with the Makler chamber. The sperm microfluidic chip analyzes both total and motile sperm concentrations in one spin, is accurate and easy to use, and should enable sperm quality analysis with ease.

Data on assessment of groundwater quality for drinking and irrigation in rural area Sarpol-e Zahab city, Kermanshah province, Iran.

Science.gov (United States)

Soleimani, Hamed; Abbasnia, Abbas; Yousefi, Mahmood; Mohammadi, Ali Akbar; Khorasgani, Fazlollah Changani

2018-04-01

In present study 30 groundwater samples were collected from Sarpol-e Zahab area, Kermanshah province of Iran in order to assess the quality of groundwater in subjected area and determining its suitability for drinking and agricultural purposes. Also the variations in the quality levels of groundwater were compared over the years of 2015 and 2016. Statistical analyses including Spearman correlation coefficients and factor analysis display good correlation between physicochemical parameters (EC, TDS and TH) and Na + , Mg 2+ , Ca 2+ , Cl - and [Formula: see text] ionic constituents. Also in order to assess water quality for irrigation we used the United States Department of Agriculture (USDA) classification which is based on SAR for irrigation suitability assessment. In addition, the residual sodium carbonate (RSC), %Na, PI, KR, SSP, MH, EC characteristics were calculated for all samples and used for assessment of irrigation suitability. Based on these indicators, for every two years, the quality of water for agriculture is in good and excellent category. The Piper classification for hydro geochemical facies indicates that the water in the study area is of Ca-HCO 3 - type. However, the study of water hardness shows that more than 80% of samples are in hard and very hard water class. Therefore, there is a need for decisions to refine and soften the water.

Pre-analytical sample quality: metabolite ratios as an intrinsic marker for prolonged room temperature exposure of serum samples.

Directory of Open Access Journals (Sweden)

Gabriele Anton

Full Text Available Advances in the "omics" field bring about the need for a high number of good quality samples. Many omics studies take advantage of biobanked samples to meet this need. Most of the laboratory errors occur in the pre-analytical phase. Therefore evidence-based standard operating procedures for the pre-analytical phase as well as markers to distinguish between 'good' and 'bad' quality samples taking into account the desired downstream analysis are urgently needed. We studied concentration changes of metabolites in serum samples due to pre-storage handling conditions as well as due to repeated freeze-thaw cycles. We collected fasting serum samples and subjected aliquots to up to four freeze-thaw cycles and to pre-storage handling delays of 12, 24 and 36 hours at room temperature (RT and on wet and dry ice. For each treated aliquot, we quantified 127 metabolites through a targeted metabolomics approach. We found a clear signature of degradation in samples kept at RT. Storage on wet ice led to less pronounced concentration changes. 24 metabolites showed significant concentration changes at RT. In 22 of these, changes were already visible after only 12 hours of storage delay. Especially pronounced were increases in lysophosphatidylcholines and decreases in phosphatidylcholines. We showed that the ratio between the concentrations of these molecule classes could serve as a measure to distinguish between 'good' and 'bad' quality samples in our study. In contrast, we found quite stable metabolite concentrations during up to four freeze-thaw cycles. We concluded that pre-analytical RT handling of serum samples should be strictly avoided and serum samples should always be handled on wet ice or in cooling devices after centrifugation. Moreover, serum samples should be frozen at or below -80°C as soon as possible after centrifugation.

Analytical laboratory quality assurance guidance in support of EM environmental sampling and analysis activities

International Nuclear Information System (INIS)

1994-05-01

This document introduces QA guidance pertaining to design and implementation of laboratory procedures and processes for collecting DOE Environmental Restoration and Waste Management (EM) ESAA (environmental sampling and analysis activities) data. It addresses several goals: identifying key laboratory issues and program elements to EM HQ and field office managers; providing non-prescriptive guidance; and introducing environmental data collection program elements for EM-263 assessment documents and programs. The guidance describes the implementation of laboratory QA elements within a functional QA program (development of the QA program and data quality objectives are not covered here)

Assessing Volunteered Geographic Information (vgi) Quality Based on CONTRIBUTORS' Mapping Behaviours

Science.gov (United States)

Bégin, D.; Devillers, R.; Roche, S.

2013-05-01

VGI changed the mapping landscape by allowing people that are not professional cartographers to contribute to large mapping projects, resulting at the same time in concerns about the quality of the data produced. While a number of early VGI studies used conventional methods to assess data quality, such approaches are not always well adapted to VGI. Since VGI is a user-generated content, we posit that features and places mapped by contributors largely reflect contributors' personal interests. This paper proposes studying contributors' mapping processes to understand the characteristics and quality of the data produced. We argue that contributors' behaviour when mapping reflects contributors' motivation and individual preferences in selecting mapped features and delineating mapped areas. Such knowledge of contributors' behaviour could allow for the derivation of information about the quality of VGI datasets. This approach was tested using a sample area from OpenStreetMap, leading to a better understanding of data completeness for contributor's preferred features.

Measuring data quality for ongoing improvement a data quality assessment framework

CERN Document Server

Sebastian-Coleman, Laura

2013-01-01

The Data Quality Assessment Framework shows you how to measure and monitor data quality, ensuring quality over time. You'll start with general concepts of measurement and work your way through a detailed framework of more than three dozen measurement types related to five objective dimensions of quality: completeness, timeliness, consistency, validity, and integrity. Ongoing measurement, rather than one time activities will help your organization reach a new level of data quality. This plain-language approach to measuring data can be understood by both business and IT and provides pra

[Sampling in quality control of medicinal materials-A case of Epimedium].

Science.gov (United States)

Wang, Chuanyi; Cao, Jinyi; Liang, Yun; Huang, Wenhua; Guo, Baolin

2009-04-01

To investigate the effect of the different individual number of sampling on the assay results of the medicinal materials. Epimedium pubescens and E. brevicornu were used as samples. The 6 sampling levels were formulated as 1 individual, 5, 10, 20, 30, 50 individuals mix, each level with 3 parallels and 1 individual level5 parallels. The contents of epimedin C and icariin, and the peak areas of epimedin A, epimedin B, rhamnosyl icarisid II and icarisid II in all samples were analyzed by HPLC. The variation degree varied with species and chemical constituents, but the RSD and the deviation from the true value decreased with the increase of individual number on the same chemical constituent. The sampling number should be more than 10 individuals in quality control of Epimedium, and 50 or more individuals would be better for representing the quality of medicinal materials.

Characterization of the effect of sample quality on high density oligonucleotide microarray data using progressively degraded rat liver RNA

Directory of Open Access Journals (Sweden)

Rosenzweig Barry A

2007-09-01

Full Text Available Abstract Background The interpretability of microarray data can be affected by sample quality. To systematically explore how RNA quality affects microarray assay performance, a set of rat liver RNA samples with a progressive change in RNA integrity was generated by thawing frozen tissue or by ex vivo incubation of fresh tissue over a time course. Results Incubation of tissue at 37°C for several hours had little effect on RNA integrity, but did induce changes in the transcript levels of stress response genes and immune cell markers. In contrast, thawing of tissue led to a rapid loss of RNA integrity. Probe sets identified as most sensitive to RNA degradation tended to be located more than 1000 nucleotides upstream of their transcription termini, similar to the positioning of control probe sets used to assess sample quality on Affymetrix GeneChip® arrays. Samples with RNA integrity numbers less than or equal to 7 showed a significant increase in false positives relative to undegraded liver RNA and a reduction in the detection of true positives among probe sets most sensitive to sample integrity for in silico modeled changes of 1.5-, 2-, and 4-fold. Conclusion Although moderate levels of RNA degradation are tolerated by microarrays with 3'-biased probe selection designs, in this study we identify a threshold beyond which decreased specificity and sensitivity can be observed that closely correlates with average target length. These results highlight the value of annotating microarray data with metrics that capture important aspects of sample quality.

Water quality assessment with hierarchical cluster analysis based on Mahalanobis distance.

Science.gov (United States)

Du, Xiangjun; Shao, Fengjing; Wu, Shunyao; Zhang, Hanlin; Xu, Si

2017-07-01

Water quality assessment is crucial for assessment of marine eutrophication, prediction of harmful algal blooms, and environment protection. Previous studies have developed many numeric modeling methods and data driven approaches for water quality assessment. The cluster analysis, an approach widely used for grouping data, has also been employed. However, there are complex correlations between water quality variables, which play important roles in water quality assessment but have always been overlooked. In this paper, we analyze correlations between water quality variables and propose an alternative method for water quality assessment with hierarchical cluster analysis based on Mahalanobis distance. Further, we cluster water quality data collected form coastal water of Bohai Sea and North Yellow Sea of China, and apply clustering results to evaluate its water quality. To evaluate the validity, we also cluster the water quality data with cluster analysis based on Euclidean distance, which are widely adopted by previous studies. The results show that our method is more suitable for water quality assessment with many correlated water quality variables. To our knowledge, it is the first attempt to apply Mahalanobis distance for coastal water quality assessment.

Predictive no-reference assessment of video quality

NARCIS (Netherlands)

Torres Vega, M.; Mocanu, D.C.; Stavrou, S.; Liotta, A.

2017-01-01

Among the various means to evaluate the quality of video streams, light-weight No-Reference (NR) methods have low computation and may be executed on thin clients. Thus, these methods would be perfect candidates in cases of real-time quality assessment, automated quality control and in adaptive

Quality of assessments within reach: Review study of research and results of the quality of assessments

NARCIS (Netherlands)

Maassen, Nathalie Anthonia Maria; Hopster-den Otter, Dorothea; Wools, S.; Hemker, B.T.; Straetmans, G.J.J.M.; Eggen, Theodorus Johannes Hendrikus Maria

2015-01-01

Educational tests and assessments are important instruments to measure a student’s knowledge and skills. The question that is addressed in this review study is: “which aspects are currently considered as important to the quality of educational assessments?” Furthermore, it is explored how this

Assessment of Soil Quality of Croplands in the Corn Belt of Northeast China

Directory of Open Access Journals (Sweden)

Xiaoyan Li

2018-01-01

Full Text Available The increasing global demands for land resource with increasing population have resulted in occurrence of soil degradation in many regions of the world. Assessment of soil quality has become the basic work for agricultural sustainable development and selecting regional indicators effectively has become very important since there are no standard evaluation methods and universal indicators. In this study, taking the Corn Belt of Northeast China as the study area, seven indicators—obstacle horizon thickness, cation exchange capacity, pH, soil organic matter, total nitrogen, total potassium, and available Fe—were selected to constitute the minimum data set from sixteen indictors of the total data set to assess the soil quality. The soil quality of the study area was dominated by moderate grade, increasing from west to east. The soil quality of Yushu, Changchun and Shuangyang had higher values, and that of Nongan was the lowest. We found that the distribution of cation exchange capacity has a good consistency with the assessment result of the soil quality. Black soils were distributed in the middle part of the study region from north to south and accounted for a higher quality, exactly where the areas of rapid urbanization are located. An ANOVA analysis showed that soil quality in the Corn Belt of Northeast China was greatly affected by topographic factors and agricultural management and climate was not the principal factor affecting soil quality. Though the minimum data set slightly reduced the evaluation accuracy, a large sampling density in our study was able to improve the precision loss that resulted from reducing the number of indicators to a certain extent.

The economic impact of poor sample quality in clinical chemistry laboratories: results from a global survey.

Science.gov (United States)

Erdal, Erik P; Mitra, Debanjali; Khangulov, Victor S; Church, Stephen; Plokhoy, Elizabeth

2017-03-01

Background Despite advances in clinical chemistry testing, poor blood sample quality continues to impact laboratory operations and the quality of results. While previous studies have identified the preanalytical causes of lower sample quality, few studies have examined the economic impact of poor sample quality on the laboratory. Specifically, the costs associated with workarounds related to fibrin and gel contaminants remain largely unexplored. Methods A quantitative survey of clinical chemistry laboratory stakeholders across 10 international regions, including countries in North America, Europe and Oceania, was conducted to examine current blood sample testing practices, sample quality issues and practices to remediate poor sample quality. Survey data were used to estimate costs incurred by laboratories to mitigate sample quality issues. Results Responses from 164 participants were included in the analysis, which was focused on three specific issues: fibrin strands, fibrin masses and gel globules. Fibrin strands were the most commonly reported issue, with an overall incidence rate of ∼3%. Further, 65% of respondents indicated that these issues contribute to analyzer probe clogging, and the majority of laboratories had visual inspection and manual remediation practices in place to address fibrin- and gel-related quality problems (55% and 70%, respectively). Probe maintenance/replacement, visual inspection and manual remediation were estimated to carry significant costs for the laboratories surveyed. Annual cost associated with lower sample quality and remediation related to fibrin and/or gel globules for an average US laboratory was estimated to be $100,247. Conclusions Measures to improve blood sample quality present an important step towards improved laboratory operations.

Lot quality assurance sampling for monitoring coverage and quality of a targeted condom social marketing programme in traditional and non-traditional outlets in India.

Science.gov (United States)

Piot, Bram; Mukherjee, Amajit; Navin, Deepa; Krishnan, Nattu; Bhardwaj, Ashish; Sharma, Vivek; Marjara, Pritpal

2010-02-01

This study reports on the results of a large-scale targeted condom social marketing campaign in and around areas where female sex workers are present. The paper also describes the method that was used for the routine monitoring of condom availability in these sites. The lot quality assurance sampling (LQAS) method was used for the assessment of the geographical coverage and quality of coverage of condoms in target areas in four states and along selected national highways in India, as part of Avahan, the India AIDS initiative. A significant general increase in condom availability was observed in the intervention area between 2005 and 2008. High coverage rates were gradually achieved through an extensive network of pharmacies and particularly of non-traditional outlets, whereas traditional outlets were instrumental in providing large volumes of condoms. LQAS is seen as a valuable tool for the routine monitoring of the geographical coverage and of the quality of delivery systems of condoms and of health products and services in general. With a relatively small sample size, easy data collection procedures and simple analytical methods, it was possible to inform decision-makers regularly on progress towards coverage targets.

Real Time Face Quality Assessment for Face Log Generation

DEFF Research Database (Denmark)

Kamal, Nasrollahi; Moeslund, Thomas B.

2009-01-01

Summarizing a long surveillance video to just a few best quality face images of each subject, a face-log, is of great importance in surveillance systems. Face quality assessment is the back-bone for face log generation and improving the quality assessment makes the face logs more reliable....... Developing a real time face quality assessment system using the most important facial features and employing it for face logs generation are the concerns of this paper. Extensive tests using four databases are carried out to validate the usability of the system....

Data Quality Assessment Report for the Remedial Investigation of Hanford Site Releases to the Columbia River, Hanford Site, Washington

Energy Technology Data Exchange (ETDEWEB)

L.C. Hulstrom

2010-09-21

This report summarizes the results of the data quality assessment that was performed on the analytical data generated in connection with the 2008/2009 surface water, sediment, and soil data collection; groundwater upwelling investigation sample collection; and fish tissue sample collection.

Data Quality Assessment Report for the Remedial Investigation of Hanford Site Releases to the Columbia River, Hanford Site, Washington

Energy Technology Data Exchange (ETDEWEB)

L.C. Hulstrom

2010-08-10

This report summarizes the results of the data quality assessment that was performed on the analytical data generated in connection with the 2008/2009 surface water, sediment, and soil data collection; groundwater upwelling investigation sample collection; and fish tissue sample collection.

Words that describe chronic musculoskeletal pain: implications for assessing pain quality across cultures.

Science.gov (United States)

Sharma, Saurab; Pathak, Anupa; Jensen, Mark P

2016-01-01

People from different cultures who speak different languages may experience pain differently. This possible variability has important implications for evaluating the validity of pain quality measures that are directly translated into different languages without cultural adaptations. The aim of this study was to evaluate the impact of language and culture on the validity of pain quality measures by comparing the words that individuals with chronic pain from Nepal use to describe their pain with those used by patients from the USA. A total of 101 individuals with chronic musculoskeletal pain in Nepal were asked to describe their pain. The rates of the different pain descriptor domains and phrases used by the Nepali sample were then compared to the published rates of descriptors used by patients from the USA. The content validity of commonly used measures for assessing pain quality was then evaluated. While there was some similarity between patients from Nepal and the USA in how they describe pain, there were also important differences, especially in how pain quality was described. For example, many patients from Nepal used metaphors to describe their pain. Also, the patients from Nepal often used a category of pain descriptor - which describes a physical state - not used by patients from the USA. Only the original McGill Pain Questionnaire was found to have content validity for assessing pain quality in patients from Nepal, although other existing pain quality measures could be adapted to be content valid by adding one or two additional descriptors, depending on the measure in question. The findings indicate that direct translations of measures that are developed using samples of patients from one country or culture are not necessarily content valid for use in other countries or cultures; some adaptations may be required in order for such measures to be most useful in new language and culture.

Quality improvement of interdisciplinary rounds by leadership training based on essential quality indicators of the Interdisciplinary Rounds Assessment Scale.

Science.gov (United States)

Ten Have, Elsbeth C M; Nap, Raoul E; Tulleken, Jaap E

2013-10-01

The implementation of interdisciplinary teams in the intensive care unit (ICU) has focused attention on leadership behavior. Daily interdisciplinary rounds (IDRs) in ICUs integrate leadership behavior and interdisciplinary teamwork. The purpose of this intervention study was to measure the effect of leadership training on the quality of IDRs in the ICU. A nonrandomized intervention study was conducted in four ICUs for adults. The intervention was a 1-day training session in a simulation environment and workplace-based feedback sessions. Measurement included 28 videotaped IDRs (total, 297 patient presentations) that were assessed with 10 essential quality indicators of the validated IDR Assessment Scale. Participants were 19 intensivists who previously had no formal training in leading IDRs. They were subdivided by cluster sampling into a control group (ten experienced intensivists) and intervention group (nine intensive care fellows). Mann-Whitney U test was used to compare results between control and intervention groups. Baseline measurements of control and intervention groups revealed two indicators that differed significantly. The frequency of yes ratings for the intervention group significantly increased for seven of the ten indicators from before to after intervention. The frequency of yes ratings after training was significantly greater in the intervention than control groups for eight of the ten essential quality indicators. The leadership training improved the quality of the IDRs performed in the ICUs. This may improve quality and safety of patient care.

Flow cytometry for feline lymphoma: a retrospective study about pre-analytical factors possibly affecting the quality of samples

Directory of Open Access Journals (Sweden)

Serena Bernardi

2017-05-01

Full Text Available Introduction Flow cytometry (FC is an increasingly required technique on which veterinary oncologists rely to have an accurate, fast, minimally invasive lymphoma or leukemia diagnosis. FC has been studied and applied with great results in canine oncology, whereas in feline oncology the use of this technique is still to be experienced. This is mainly due to a supposed discomfort in sampling, because of the high prevalence of intra-abdominal lymphomas. The purpose of the present study is to investigate whether any pre-analytical factor might affect the quality of suspected feline lymphoma samples for FC analysis. Methods 97 consecutive samples of suspected feline lymphoma were retrospectively selected from the authors’ institution FC database. The referring veterinarians were recalled and interrogated about several different variables, including signalling, features of the lesion, features of the sampling procedure and the experience of veterinarians performing the sampling. Statistical analyses were performed to assess the possible influence of these variables on the cellularity of the samples and the likelihood of being finally processed for FC. Results None of the investigated variables significantly influenced the quality of the submitted samples, but the needle size, with 21G needles providing the highest cellularity (Table 1. Notably, the samples quality did not vary between peripheral and intra-abdominal lesions. Sample cellularity alone influenced the likelihood of being processed. About a half of the cats required pharmacological restraint. Side effects were reported in one case only (transient swelling after peripheral lymph node sampling. Conclusions FC can be safely applied to cases of suspected feline lymphomas, even for intra-abdominal lesions. 21G needle should be preferred for sampling. This study provides the bases for the spread of this minimally invasive, fast and cost-effective technique in feline medicine.

Posttraumatic stress disorder: prevalences, comorbidities and quality of life in a community sample of young adults

OpenAIRE

Medeiros, Letícia Galery; Silva, Ricardo Azevedo da; Souza, Luciano Dias de Mattos; Silva, Giovanna Del Grande da; Pinheiro, Ricardo Tavares; Jansen, Karen

2015-01-01

Objectives To verify the prevalence of current posttraumatic stress disorder (PTSD) in young adults, the occurrence of comorbidities and its association with quality of life. Methods This is a cross-sectional population-based study. The targeted population consisted on individuals aged 18 to 24 years old, who lived in the urban area of Pelotas-RS, Brazil. Cluster sampling was applied. PTSD and its comorbidities were assessed using the Mini International Neuropsychiatric Interview (MINI 5.0), ...

No-Reference Video Quality Assessment by HEVC Codec Analysis

DEFF Research Database (Denmark)

Huang, Xin; Søgaard, Jacob; Forchhammer, Søren

2015-01-01

This paper proposes a No-Reference (NR) Video Quality Assessment (VQA) method for videos subject to the distortion given by High Efficiency Video Coding (HEVC). The proposed assessment can be performed either as a BitstreamBased (BB) method or as a Pixel-Based (PB). It extracts or estimates...... the transform coefficients, estimates the distortion, and assesses the video quality. The proposed scheme generates VQA features based on Intra coded frames, and then maps features using an Elastic Net to predict subjective video quality. A set of HEVC coded 4K UHD sequences are tested. Results show...... that the quality scores computed by the proposed method are highly correlated with the subjective assessment....

The integrated quality assessment of Chinese commercial dry red wine based on a method of online HPLC-DAD-CL combined with HPLC-ESI-MS.

Science.gov (United States)

Yu, Hai-Xiang; Sun, Li-Qiong; Qi, Jin

2014-07-01

To apply an integrated quality assessment strategy to investigate the quality of multiple Chinese commercial dry red wine samples. A comprehensive method was developed by combining a high performance liquid chromatography-diode array detector-chemiluminescence (HPLC-DAD-CL) online hyphenated system with an HPLC-ESI-MS technique. Chromatographic and H2O2-scavenging active fingerprints of thirteen batches of different, commercially available Chinese dry red wine samples were obtained and analyzed. Twenty-five compounds, including eighteen antioxidants were identified and evaluated. The dominant and characteristic antioxidants in the samples were identified. The relationships between antioxidant potency and the cultivated variety of grape, producing area, cellaring period, and trade mark are also discussed. The results provide the feasibility for an integrated quality assessment strategy to be efficiently and objectively used in quality (especially antioxidant activity) assessment and identification of dry red wine. Copyright © 2014 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

The effects of storage temperature and duration of blood samples on DNA and RNA qualities.

Science.gov (United States)

Huang, Lien-Hung; Lin, Pei-Hsien; Tsai, Kuo-Wang; Wang, Liang-Jen; Huang, Ying-Hsien; Kuo, Ho-Chang; Li, Sung-Chou

2017-01-01

DNA and RNA samples from blood are the common examination target for non-invasive physical tests and/or biomedical studies. Since high-quality DNA and RNA samples guarantee the correctness of these tests and/or studies, we investigated the effects of storage temperature and storage duration of whole blood on DNA and RNA qualities. Subjects were enrolled to donate blood samples which were stored for different durations and at different temperatures, followed by the examinations on RNA quality, qPCR, DNA quality and DNA methylation. For RNA, we observed obvious quality decline with storage duration longer than 24 hours. Storage at low temperature does not keep RNA samples from degradation. And, storing whole blood samples in freezer dramatically damage RNA. For DNA, quality decline was not observed even with storage duration for 15 days. However, DNA methylation significantly altered with storage duration longer than three days. Storage duration within 24 hours is critical for collecting high-quality RNA samples for next-generation sequencing (NGS) assays (RIN≧8). If microarray assays are expected (RIN≧7), storage duration within 32 hours is acceptable. Although DNA is resistant within 15 days when kept in whole blood, DNA quantity dramatically decreases owing to WBC lysis. In addition, duration for more than three days significantly alter DNA methylation status, globally and locally. Our result provides a reference for dealing with blood samples.

Daily Encounter Cards—Evaluating the Quality of Documented Assessments

Science.gov (United States)

Cheung, Warren J.; Dudek, Nancy; Wood, Timothy J.; Frank, Jason R.

2016-01-01

ABSTRACT Background  Concerns over the quality of work-based assessment (WBA) completion has resulted in faculty development and rater training initiatives. Daily encounter cards (DECs) are a common form of WBA used in ambulatory care and shift work settings. A tool is needed to evaluate initiatives aimed at improving the quality of completion of this widely used form of WBA. Objective  The completed clinical evaluation report rating (CCERR) was designed to provide a measure of the quality of documented assessments on in-training evaluation reports. The purpose of this study was to provide validity evidence to support using the CCERR to assess the quality of DEC completion. Methods  Six experts in resident assessment grouped 60 DECs into 3 quality categories (high, average, and poor) based on how informative each DEC was for reporting judgments of the resident's performance. Eight supervisors (blinded to the expert groupings) scored the 10 most representative DECs in each group using the CCERR. Mean scores were compared to determine if the CCERR could discriminate based on DEC quality. Results  Statistically significant differences in CCERR scores were observed between all quality groups (P < .001). A generalizability analysis demonstrated the majority of score variation was due to differences in DECs. The reliability with a single rater was 0.95. Conclusions  The CCERR is a reliable and valid tool to evaluate DEC quality. It can serve as an outcome measure for studying interventions targeted at improving the quality of assessments documented on DECs. PMID:27777675

Validity of portfolio assessment: which qualities determine ratings?

NARCIS (Netherlands)

Driessen, E.W.; Overeem, K.; Tartwijk, J. van; Vleuten, C.P.M. van der; Muijtjens, A.M.M.

2006-01-01

The portfolio is becoming increasingly accepted as a valuable tool for learning and assessment. The validity of portfolio assessment, however, may suffer from bias due to irrelevant qualities, such as lay-out and writing style. We examined the possible effects of such qualities in a portfolio

Automatic Assessment of Pathological Voice Quality Using Higher-Order Statistics in the LPC Residual Domain

Directory of Open Access Journals (Sweden)

JiYeoun Lee

2009-01-01

Full Text Available A preprocessing scheme based on linear prediction coefficient (LPC residual is applied to higher-order statistics (HOSs for automatic assessment of an overall pathological voice quality. The normalized skewness and kurtosis are estimated from the LPC residual and show statistically meaningful distributions to characterize the pathological voice quality. 83 voice samples of the sustained vowel /a/ phonation are used in this study and are independently assessed by a speech and language therapist (SALT according to the grade of the severity of dysphonia of GRBAS scale. These are used to train and test classification and regression tree (CART. The best result is obtained using an optima l decision tree implemented by a combination of the normalized skewness and kurtosis, with an accuracy of 92.9%. It is concluded that the method can be used as an assessment tool, providing a valuable aid to the SALT during clinical evaluation of an overall pathological voice quality.

Semi-annual report of the Department of Energy, Deputy Assistant Secretary for Environment, Quality Assessment Program

International Nuclear Information System (INIS)

Sanderson, C.G.; Scarpitta, S.C.

1991-01-01

This report presents the results from the analysis of the 34th set of environmental quality assessment samples (QAP 34) that were received on or before June 10, 1991. This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML's results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 3 days after the reporting deadline via a modem-telephone connection to the EML computer. The ''EML value'' listed in the tables to which the contractors' results are compared is the mean of replicate determination for each nuclide. The EML uncertainty is the standard error of the mean. All other uncertainties are as reported by the participants

Efficient sampling to determine distribution of fruit quality and yield in a commercial apple orchard

DEFF Research Database (Denmark)

Martinez Vega, Mabel Virginia; Wulfsohn, D.; Zamora, I.

2012-01-01

In situ assessment of fruit quality and yield can provide critical data for marketing and for logistical planning of the harvest, as well as for site-specific management. Our objective was to develop and validate efficient field sampling procedures for this purpose. We used the previously reported...... ‘fractionator’ tree sampling procedure and supporting handheld software (Gardi et al., 2007; Wulfsohn et al., 2012) to obtain representative samples of fruit from a 7.6-ha apple orchard (Malus ×domestica ‘Fuji Raku Raku’) in central Chile. The resulting sample consisted of 70 fruit on 56 branch segments...... of yield. Estimated marketable yield was 295.8±50.2 t. Field and packinghouse records indicated that of 348.2 t sent to packing (52.4 t or 15% higher than our estimate), 263.0 t was packed for export (32.8 t less or -12% error compared to our estimate). The estimated distribution of caliber compared very...

The quality of sample surveys in a developing nation

Directory of Open Access Journals (Sweden)

Paul A Bourne

2010-08-01

Full Text Available Paul A Bourne1, Christopher AD Charles2,3, Neva South-Bourne4, Chloe Morris1, Denise Eldemire-Shearer1, Maureen D Kerr-Campbell51Department of Community Health and Psychiatry, Faculty of Medical Sciences, University of the West Indies, Mona, Kingston, Jamaica; 2King Graduate School, Monroe College, Bronx, New York, USA; 3Center for Victim Support, Harlem Hospital Center, New York, USA; 4Research assistant for Paul A Bourne; 5Systems Development Unit, Main Library, Faculty of Humanities and Education, University of the West Indies, Mona, Kingston, JamaicaBackground: In Jamaica, population census began in 1844, and many intercensal ratios obtained from the census data showed that there is a general high degree of accuracy of the data. However, statistics from the Jamaican Ministry of Health showed that there are inaccuracies in health data collected from males using sample surveys.Objectives: The objectives of the present research are to 1 investigate the accuracy of a national sample survey, 2 explore the feasibility and quality of using a subnational sample survey to represent a national survey, 3 aid other scholars in understanding the probability of using national sample surveys and subnational sample surveys, 4 assess older men’s ­evaluation of their health status, and 5 determine whether dichotomization changes self-evaluated health status.Methods: For the current study, the data used in the analysis were originally collected from 2 different sources: 1 the Jamaica Survey of Living Conditions (JSLC and 2 Survey of Older Men (SOM. Cross validation of self-evaluated data of men in Jamaica was done with comparable samples of the complete JSLC data and the SOM data, where men older than 55 years were selected from each sample.Results: In study 1, 50.2% of respondents indicated at least good self-evaluated health status compared with 74.0% in study 2. Statistical associations were found between health status and survey sample (Χ2 [df = 5

STS 131 Return Samples: Assessment of Air Quality Aboard the Shuttle (STS-131) and International Space Station (19A)

Science.gov (United States)

James, John T.

2010-01-01

The toxicological assessments of 1 grab sample canister (GSC) from the Shuttle are reported in Table 1. Analytical methods have not changed from earlier reports. The recoveries of the 3 surrogates (C-13-acetone, fluorobenzene, and chlorobenzene) from the Shuttle GSC were 100%, 93%, and 101%, respectively. Based on the historical experience using end-of-mission samples, the Shuttle atmosphere was acceptable for human respiration.

Automated image quality assessment for chest CT scans.

Science.gov (United States)

Reeves, Anthony P; Xie, Yiting; Liu, Shuang

2018-02-01

Medical image quality needs to be maintained at standards sufficient for effective clinical reading. Automated computer analytic methods may be applied to medical images for quality assessment. For chest CT scans in a lung cancer screening context, an automated quality assessment method is presented that characterizes image noise and image intensity calibration. This is achieved by image measurements in three automatically segmented homogeneous regions of the scan: external air, trachea lumen air, and descending aorta blood. Profiles of CT scanner behavior are also computed. The method has been evaluated on both phantom and real low-dose chest CT scans and results show that repeatable noise and calibration measures may be realized by automated computer algorithms. Noise and calibration profiles show relevant differences between different scanners and protocols. Automated image quality assessment may be useful for quality control for lung cancer screening and may enable performance improvements to automated computer analysis methods. © 2017 American Association of Physicists in Medicine.

Assessing quality of life in young adult cancer survivors: development of the Survivorship-Related Quality of Life scale.

Science.gov (United States)

Park, Crystal L; Wortmann, Jennifer H; Hale, Amy E; Cho, Dalnim; Blank, Thomas O

2014-10-01

Scientific advances in treatments and outcomes for those diagnosed with cancer in late adolescence and early adulthood depend, in part, on the availability of adequate assessment tools to measure health-related quality of life (HRQOL) for survivors in this age group. Domains especially relevant to late adolescence and young adulthood (LAYA; e.g., education and career, committed romantic relationships, worldview formation) are typically overlooked in studies assessing the impact of cancer, usually more appropriate for middle-aged or older survivors. Current HRQOL measures also tend to assess issues that are salient during or shortly after treatment rather than reflecting life years after treatment. To develop a new measure to better capture the experience of LAYA cancer survivors in longer-term survivorship (the LAYA Survivorship-Related Quality of Life measure, LAYA-SRQL), we completed an extensive measure development process. After a literature review and focus groups with LAYA cancer survivors, we generated items and ran confirmatory factor and reliability analyses using a sample of 292 LAYA cancer survivors. We then examined validity using existing measures of physical and mental health, quality of life, and impact of cancer. The final model consisted of two domains (satisfaction and impact), each consisting of ten factors: existential/spirituality, coping, relationship, dependence, vitality, health care, education/career, fertility, intimacy/sexuality, and cognition/memory. Confirmatory factor analysis and validity analyses indicated that the LAYA-SRQL is a psychometrically sound instrument with good validity. The LAYA-SRQL fills an important need in survivorship research, providing a way to assess HRQOL in LAYAs in a developmentally informed way.

Groundwater quality data in 15 GAMA study units: results from the 2006–10 Initial sampling and the 2009–13 resampling of wells, California GAMA Priority Basin Project

Science.gov (United States)

Kent, Robert

2015-08-31

The Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) program was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). From May 2004 to March 2012, the GAMA-PBP collected samples from more than 2,300 wells in 35 study units across the State. Selected wells in each study unit were sampled again approximately 3 years after initial sampling as part of an assessment of temporal trends in water quality by the GAMA-PBP. This triennial (every 3 years) trend sampling of GAMA-PBP study units concluded in December 2013. Fifteen of the study units, initially sampled between January 2006 and June 2010 and sampled a second time between April 2009 and April 2013 to assess temporal trends, are the subject of this report.

Variation in marital quality in a national sample of divorced women.

Science.gov (United States)

James, Spencer L

2015-06-01

Previous work has compared marital quality between stably married and divorced individuals. Less work has examined the possibility of variation among divorcés in trajectories of marital quality as divorce approaches. This study addressed that hole by first examining whether distinct trajectories of marital quality can be discerned among women whose marriages ended in divorce and, second, the profile of women who experienced each trajectory. Latent class growth analyses with longitudinal data from a nationally representative sample were used to "look backward" from the time of divorce. Although demographic and socioeconomic variables from this national sample did not predict the trajectories well, nearly 66% of divorced women reported relatively high levels of both happiness and communication and either low or moderate levels of conflict. Future research including personality or interactional patterns may lead to theoretical insights about patterns of marital quality in the years leading to divorce. (c) 2015 APA, all rights reserved).

A framework for assessing Health Economic Evaluation (HEE) quality appraisal instruments.

Science.gov (United States)

Langer, Astrid

2012-08-16

Health economic evaluations support the health care decision-making process by providing information on costs and consequences of health interventions. The quality of such studies is assessed by health economic evaluation (HEE) quality appraisal instruments. At present, there is no instrument for measuring and improving the quality of such HEE quality appraisal instruments. Therefore, the objectives of this study are to establish a framework for assessing the quality of HEE quality appraisal instruments to support and improve their quality, and to apply this framework to those HEE quality appraisal instruments which have been subject to more scrutiny than others, in order to test the framework and to demonstrate the shortcomings of existing HEE quality appraisal instruments. To develop the quality assessment framework for HEE quality appraisal instruments, the experiences of using appraisal tools for clinical guidelines are used. Based on a deductive iterative process, clinical guideline appraisal instruments identified through literature search are reviewed, consolidated, and adapted to produce the final quality assessment framework for HEE quality appraisal instruments. The final quality assessment framework for HEE quality appraisal instruments consists of 36 items organized within 7 dimensions, each of which captures a specific domain of quality. Applying the quality assessment framework to four existing HEE quality appraisal instruments, it is found that these four quality appraisal instruments are of variable quality. The framework described in this study should be regarded as a starting point for appraising the quality of HEE quality appraisal instruments. This framework can be used by HEE quality appraisal instrument producers to support and improve the quality and acceptance of existing and future HEE quality appraisal instruments. By applying this framework, users of HEE quality appraisal instruments can become aware of methodological deficiencies

Quality assessment of graphene: Continuity, uniformity,and accuracy of mobility measurements

Institute of Scientific and Technical Information of China (English)

David M.A.Mackenzie; Timothy J.Booth; Lene Gammelgaard; Johanna Zultak; Bjarke S.Jessen; Peter Bφggild; Dirch H.Petersen; Jonas D.Buron; Patrick R.Whelan; José M.Caridad; Martin Bjergfelt; Birong Luo; Abhay Shivayogimath; Anne L.Smitshuysen; Joachim D.Thomsen

2017-01-01

With the increasing availability of large-area graphene,the ability to rapidly and accurately assess the quality of the electrical properties has become critically important.For practical applications,spatial variability in carrier density and carrier mobility must be controlled and minimized.We present a simple framework for assessing the quality and homogeneity of large-area graphene devices.The field effect in both exfoliated graphene devices encapsulated in hexagonal boron nitride and chemical vapor-deposited (CVD) devices was measured in dual current-voltage configurations and used to derive a single,gate-dependent effective shape factor,β,for each device.β is a sensitive indicator of spatial homogeneity that can be obtained from samples of arbitrary shape.All 50 devices investigated in this study show a variation (up to tenfold) inβ as a function of the gate bias.Finite element simulations suggest that spatial doping inhomogeneity,rather than mobility inhomogeneity,is the primary cause of the gate dependence ofβ,and that measurable variations ofβ can be caused by doping variations as small as 1010 cm-2.Our results suggest that local variations in the position of the Dirac point alter the current flow and thus the effective sample shape as a function of the gate bias.We also found that such variations lead to systematic errors in carrier mobility calculations,which can be revealed by inspecting the correspondingβ factor.

Arbuscular mycorrhiza in soil quality assessment

DEFF Research Database (Denmark)

Kling, M.; Jakobsen, I.

1998-01-01

aggregates and to the protection of plants against drought and root pathogens. Assessment of soil quality, defined as the capacity of a soil to function within ecosystem boundaries to sustain biological productivity, maintain environmental quality, and promote plant health, should therefore include both......Arbuscular mycorrhizal (AM) fungi constitute a living bridge for the transport of nutrients from soil to plant roots, and are considered as the group of soil microorganisms that is of most direct importance to nutrient uptake by herbaceous plants. AM fungi also contribute to the formation of soil...... quantitative and qualitative measurements of this important biological resource. Various methods for the assessment of the potential for mycorrhiza formation and function are presented. Examples are given of the application of these methods to assess the impact of pesticides on the mycorrhiza....

Using questionnaires to assess the quality of life and multidimensionality of fibromyalgia patients.

Science.gov (United States)

Martins, Marielza Regina Ismael; Polvero, Letícia Oliveira; Rocha, Carlos Eduardo; Foss, Marcos Henrique; Santos Junior, Randolfo Dos

2012-01-01

Fibromyalgia syndrome (FMS) is a painful condition of unknown etiology, highly prevalent, and associated with other conditions, which causes great impact on daily life and quality of life. To assess, due to the multifactorial character of the FMS, the discriminating power of instruments used to identify good indicators of self-assessment and self-knowledge. This is a descriptive, exploratory, comparative, cross-sectional study with quantitative approach, and sample comprising a treatment group (T), diagnosed with FMS (n = 63) and a control group (C), undergoing interconsultation at the Pain Outpatient Clinic (n = 75). The following instruments were used: Fibromyalgia Impact Questionnaire (FIQ); visual analogue scale (VAS); McGill Pain Questionnaire; and the Post-Sleep Inventory (PSI). To evaluate the quality of life, Medical Outcomes Study 12-item Short-Form Health Survey (SF-12) was used. In the two groups, female gender predominated. The mean age of the sample was 42.3 ± 4.3 years, 45% were married, and the average schooling was 8 ± 3.5 years. The mean duration of pain was 3.2 years, and a mean time of two years were required for the clinical diagnosis of FMS in group T. Group T had higher levels of pain, anxiety, and depression, worse quality of sleep, less flexibility, and worse quality of life, although some of these symptoms were also present in group C. All instruments had good discriminating power (P < 0.05), especially FIQ, VAS and PSI, whose areas under the ROC curve were greater.

Identification and assessment of potential water quality impact factors for drinking-water reservoirs.

Science.gov (United States)

Gu, Qing; Deng, Jinsong; Wang, Ke; Lin, Yi; Li, Jun; Gan, Muye; Ma, Ligang; Hong, Yang

2014-06-10

Various reservoirs have been serving as the most important drinking water sources in Zhejiang Province, China, due to the uneven distribution of precipitation and severe river pollution. Unfortunately, rapid urbanization and industrialization have been continuously challenging the water quality of the drinking-water reservoirs. The identification and assessment of potential impacts is indispensable in water resource management and protection. This study investigates the drinking water reservoirs in Zhejiang Province to better understand the potential impact on water quality. Altogether seventy-three typical drinking reservoirs in Zhejiang Province encompassing various water storage levels were selected and evaluated. Using fifty-two reservoirs as training samples, the classification and regression tree (CART) method and sixteen comprehensive variables, including six sub-sets (land use, population, socio-economy, geographical features, inherent characteristics, and climate), were adopted to establish a decision-making model for identifying and assessing their potential impacts on drinking-water quality. The water quality class of the remaining twenty-one reservoirs was then predicted and tested based on the decision-making model, resulting in a water quality class attribution accuracy of 81.0%. Based on the decision rules and quantitative importance of the independent variables, industrial emissions was identified as the most important factor influencing the water quality of reservoirs; land use and human habitation also had a substantial impact on water quality. The results of this study provide insights into the factors impacting the water quality of reservoirs as well as basic information for protecting reservoir water resources.

An assessment of the microbiological quality of liver-based pâté in England 2012-13: comparison of samples collected at retail and from catering businesses.

Science.gov (United States)

McLAUCHLIN, J; Jørgensen, F; Aird, H; Charlett, A; Elviss, N; Fenelon, D; Fox, A; Willis, C; Amar, C F L

2017-06-01

The purpose of this study was to investigate the microbiological quality of liver pâté. During 2012-13, a total of 870 samples, unrelated to the investigation of food-poisoning outbreaks, were collected either at retail (46%), catering (53%) or the point of manufacture (1%) and were tested using standard methods to detect Salmonella spp. or Campylobacter spp., and to enumerate for Listeria spp., including Listeria monocytogenes, Clostridium perfringens, coagulase-positive staphylococci including Staphylococcus aureus, Bacillus spp., including Bacillus cereus, Escherichia coli, Enterobacteriaceae, and aerobic colony counts (ACCs). Seventy-three percent of samples were of satisfactory microbiological quality, 18% were borderline and 9% unsatisfactory. Salmonella spp. or Campylobacter spp. was not recovered from any sample. The most common causes of unsatisfactory results were elevated ACCs (6% of the samples) and high Enterobacteriaceae counts (4% of samples). The remaining unsatisfactory results were due to elevated counts of: E. coli (three samples); B. cereus (one sample at 2·6 × 105 cfu/g); or L. monocytogenes (one sample at 2·9 × 103 cfu/g). Pâté from retail was less likely to be contaminated with L. monocytogenes than samples collected from catering and samples from supermarkets were of significantly better microbiological quality than those from catering establishments.

Assessment of the assessment: Evaluation of the model quality estimates in CASP10

KAUST Repository

Kryshtafovych, Andriy

2013-08-31

The article presents an assessment of the ability of the thirty-seven model quality assessment (MQA) methods participating in CASP10 to provide an a priori estimation of the quality of structural models, and of the 67 tertiary structure prediction groups to provide confidence estimates for their predicted coordinates. The assessment of MQA predictors is based on the methods used in previous CASPs, such as correlation between the predicted and observed quality of the models (both at the global and local levels), accuracy of methods in distinguishing between good and bad models as well as good and bad regions within them, and ability to identify the best models in the decoy sets. Several numerical evaluations were used in our analysis for the first time, such as comparison of global and local quality predictors with reference (baseline) predictors and a ROC analysis of the predictors\\' ability to differentiate between the well and poorly modeled regions. For the evaluation of the reliability of self-assessment of the coordinate errors, we used the correlation between the predicted and observed deviations of the coordinates and a ROC analysis of correctly identified errors in the models. A modified two-stage procedure for testing MQA methods in CASP10 whereby a small number of models spanning the whole range of model accuracy was released first followed by the release of a larger number of models of more uniform quality, allowed a more thorough analysis of abilities and inabilities of different types of methods. Clustering methods were shown to have an advantage over the single- and quasi-single- model methods on the larger datasets. At the same time, the evaluation revealed that the size of the dataset has smaller influence on the global quality assessment scores (for both clustering and nonclustering methods), than its diversity. Narrowing the quality range of the assessed models caused significant decrease in accuracy of ranking for global quality predictors but

Surface water quality assessment using factor analysis

African Journals Online (AJOL)

2006-01-16

Jan 16, 2006 ... Surface water, groundwater quality assessment and environ- .... Urbanisation influences the water cycle through changes in flow and water ..... tion of aquatic life, CCME water quality Index 1, 0. User`s ... Water, Air Soil Pollut.

Noise Estimation and Quality Assessment of Gaussian Noise Corrupted Images

Science.gov (United States)

Kamble, V. M.; Bhurchandi, K.

2018-03-01

Evaluating the exact quantity of noise present in an image and quality of an image in the absence of reference image is a challenging task. We propose a near perfect noise estimation method and a no reference image quality assessment method for images corrupted by Gaussian noise. The proposed methods obtain initial estimate of noise standard deviation present in an image using the median of wavelet transform coefficients and then obtains a near to exact estimate using curve fitting. The proposed noise estimation method provides the estimate of noise within average error of +/-4%. For quality assessment, this noise estimate is mapped to fit the Differential Mean Opinion Score (DMOS) using a nonlinear function. The proposed methods require minimum training and yields the noise estimate and image quality score. Images from Laboratory for image and Video Processing (LIVE) database and Computational Perception and Image Quality (CSIQ) database are used for validation of the proposed quality assessment method. Experimental results show that the performance of proposed quality assessment method is at par with the existing no reference image quality assessment metric for Gaussian noise corrupted images.

Quality of life assessment of children with thalassemia

OpenAIRE

Masyitah Sri Wahyuni; Muhammad Ali; Nelly Rosdiana; Bidasari Lubis

2011-01-01

Background Thalassemia is a chronic disease that is becoming a major health problem in the world, including the Mediterranean, as well as Malaysia, Thailand and Indonesia. This condition clearly affects the patient's quality of life, because of the condition itself and the effects of treatment. Assessment is needed to detennine actions to be taken to improve the quality of life in thalassemic children. Objective To assess the differences in quality of life of thalassemic children comp...

Strategies for soil quality assessment using VNIR gyperspectral spectroscopy in a western Kenya Chronosequence

Science.gov (United States)

Kinoshita, Rintaro; Moebius-Clune, Bianca N.; van Es, Harold M.; Hively, W. Dean; Bilgilis, A. Volkan

2012-01-01

Visible and near-infrared reflectance spectroscopy (VNIRS) is a rapid and nondestructive method that can predict multiple soil properties simultaneously, but its application in multidimensional soil quality (SQ) assessment in the tropics still needs to be further assessed. In this study, VNIRS (350–2500 nm) was employed to analyze 227 air-dried soil samples of Ultisols from a soil chronosequence in western Kenya and assess 16 SQ indicators. Partial least squares regression (PLSR) was validated using the full-site cross-validation method by grouping samples from each farm or forest site. Most suitable models successfully predicted SQ indicators (R2 ≥ 0.80; ratio of performance to deviation [RPD] ≥ 2.00) including soil organic matter (OMLOI), active C, Ca, cation exchange capacity (CEC), and clay. Moderately-well predicted indicators (0.50 ≤ R2 pwp), and field capacity (Θfc). Poorly predicted indicators (R2 < 0.50; RPD < 1.40) were EC, S, P, available water capacity (AWC), K, Zn, and penetration resistance. Combining VNIRS with selected field- and laboratory-measured SQ indicator values increased predictability. Furthermore, VNIRS showed moderate to substantial agreement in predicting interpretive SQ scores and a composite soil quality index (CSQI) especially when combined with directly measured SQ indicator values. In conclusion, VNIRS has good potential for low cost, rapid assessment of physical and biological SQ indicators but conventional soil chemical tests may need to be retained to provide comprehensive SQ assessments.

Quality of life in patients on chronic dialysis: self-assessment 3 months after the start of treatment. The Necosad Study Group

NARCIS (Netherlands)

Merkus, M. P.; Jager, K. J.; Dekker, F. W.; Boeschoten, E. W.; Stevens, P.; Krediet, R. T.

1997-01-01

The aim of the present multicenter study was to assess quality of life of Dutch dialysis patients 3 months after the start of chronic dialysis treatment. The quality of life was compared with the quality of life of a general population sample, and the impact of demographic, clinical, renal function,

Use of the landfill water pollution index (LWPI) for groundwater quality assessment near the landfill sites.

Science.gov (United States)

Talalaj, Izabela A; Biedka, Pawel

2016-12-01

The purpose of the paper is to assess the groundwater quality near the landfill sites using landfill water pollution index (LWPI). In order to investigate the scale of groundwater contamination, three landfills (E, H and S) in different stages of their operation were taken into analysis. Samples of groundwater in the vicinity of studied landfills were collected four times each year in the period from 2004 to 2014. A total of over 300 groundwater samples were analysed for pH, EC, PAH, TOC, Cr, Hg, Zn, Pb, Cd, Cu, as required by the UE legal acts for landfill monitoring system. The calculated values of the LWPI allowed the quantification of the overall water quality near the landfill sites. The obtained results indicated that the most negative impact on groundwater quality is observed near the old Landfill H. Improper location of piezometer at the Landfill S favoured infiltration of run-off from road pavement into the soil-water environment. Deep deposition of the groundwater level at Landfill S area reduced the landfill impact on the water quality. Conducted analyses revealed that the LWPI can be used for evaluation of water pollution near a landfill, for assessment of the variability of water pollution with time and for comparison of water quality from different piezometers, landfills or time periods. The applied WQI (Water Quality Index) can also be an important information tool for landfill policy makers and the public about the groundwater pollution threat from landfill.

Multiple category-lot quality assurance sampling: a new classification system with application to schistosomiasis control.

Science.gov (United States)

Olives, Casey; Valadez, Joseph J; Brooker, Simon J; Pagano, Marcello

2012-01-01

Originally a binary classifier, Lot Quality Assurance Sampling (LQAS) has proven to be a useful tool for classification of the prevalence of Schistosoma mansoni into multiple categories (≤10%, >10 and LQAS (MC-LQAS) have not received full treatment. We explore the analytical properties of MC-LQAS, and validate its use for the classification of S. mansoni prevalence in multiple settings in East Africa. We outline MC-LQAS design principles and formulae for operating characteristic curves. In addition, we derive the average sample number for MC-LQAS when utilizing semi-curtailed sampling and introduce curtailed sampling in this setting. We also assess the performance of MC-LQAS designs with maximum sample sizes of n=15 and n=25 via a weighted kappa-statistic using S. mansoni data collected in 388 schools from four studies in East Africa. Overall performance of MC-LQAS classification was high (kappa-statistic of 0.87). In three of the studies, the kappa-statistic for a design with n=15 was greater than 0.75. In the fourth study, where these designs performed poorly (kappa-statistic less than 0.50), the majority of observations fell in regions where potential error is known to be high. Employment of semi-curtailed and curtailed sampling further reduced the sample size by as many as 0.5 and 3.5 observations per school, respectively, without increasing classification error. This work provides the needed analytics to understand the properties of MC-LQAS for assessing the prevalance of S. mansoni and shows that in most settings a sample size of 15 children provides a reliable classification of schools.

Evaluating how variants of floristic quality assessment indicate wetland condition.

Science.gov (United States)

Kutcher, Thomas E; Forrester, Graham E

2018-03-28

Biological indicators are useful tools for the assessment of ecosystem condition. Multi-metric and multi-taxa indicators may respond to a broader range of disturbances than simpler indicators, but their complexity can make them difficult to interpret, which is critical to indicator utility for ecosystem management. Floristic Quality Assessment (FQA) is an example of a biological assessment approach that has been widely tested for indicating freshwater wetland condition, but less attention has been given to clarifying the factors controlling its response. FQA quantifies the aggregate of vascular plant species tolerance to habitat degradation (conservatism), and model variants have incorporated species richness, abundance, and indigenity (native or non-native). To assess bias, we tested FQA variants in open-canopy freshwater wetlands against three independent reference measures, using practical vegetation sampling methods. FQA variants incorporating species richness did not correlate with our reference measures and were influenced by wetland size and hydrogeomorphic class. In contrast, FQA variants lacking measures of species richness responded linearly to reference measures quantifying individual and aggregate stresses, suggesting a broad response to cumulative degradation. FQA variants incorporating non-native species, and a variant additionally incorporating relative species abundance, improved performance over using only native species. We relate our empirical findings to ecological theory to clarify the functional properties and implications of the FQA variants. Our analysis indicates that (1) aggregate conservatism reliably declines with increased disturbance; (2) species richness has varying relationships with disturbance and increases with site area, confounding FQA response; and (3) non-native species signal human disturbance. We propose that incorporating species abundance can improve FQA site-level relevance with little extra sampling effort. Using our

Assessing human error during collecting a hydrocarbon sample of ...

African Journals Online (AJOL)

This paper reports the assessment method of the hydrocarbon sample collection standard operation procedure (SOP) using THERP. The Performance Shaping Factors (PSF) from THERP analyzed and assessed the human errors during collecting a hydrocarbon sample of a petrochemical refinery plant. Twenty-two ...

ASSESSING SMALL SAMPLE WAR-GAMING DATASETS

Directory of Open Access Journals (Sweden)

W. J. HURLEY

2013-10-01

Full Text Available One of the fundamental problems faced by military planners is the assessment of changes to force structure. An example is whether to replace an existing capability with an enhanced system. This can be done directly with a comparison of measures such as accuracy, lethality, survivability, etc. However this approach does not allow an assessment of the force multiplier effects of the proposed change. To gauge these effects, planners often turn to war-gaming. For many war-gaming experiments, it is expensive, both in terms of time and dollars, to generate a large number of sample observations. This puts a premium on the statistical methodology used to examine these small datasets. In this paper we compare the power of three tests to assess population differences: the Wald-Wolfowitz test, the Mann-Whitney U test, and re-sampling. We employ a series of Monte Carlo simulation experiments. Not unexpectedly, we find that the Mann-Whitney test performs better than the Wald-Wolfowitz test. Resampling is judged to perform slightly better than the Mann-Whitney test.

Assessing Participation in Secondary Education Quality Enhancement

African Journals Online (AJOL)

Assessing Participation in Secondary Education Quality Enhancement: Teachers, Parents and Communities in Cross River State. ... ailing economy, low moral values and philosophy of the end justifies the means were reasons for low parents and communities involvement in secondary education-quality improvement.

A Review of Data Quality Assessment Methods for Public Health Information Systems

Directory of Open Access Journals (Sweden)

Hong Chen

2014-05-01

Full Text Available High quality data and effective data quality assessment are required for accurately evaluating the impact of public health interventions and measuring public health outcomes. Data, data use, and data collection process, as the three dimensions of data quality, all need to be assessed for overall data quality assessment. We reviewed current data quality assessment methods. The relevant study was identified in major databases and well-known institutional websites. We found the dimension of data was most frequently assessed. Completeness, accuracy, and timeliness were the three most-used attributes among a total of 49 attributes of data quality. The major quantitative assessment methods were descriptive surveys and data audits, whereas the common qualitative assessment methods were interview and documentation review. The limitations of the reviewed studies included inattentiveness to data use and data collection process, inconsistency in the definition of attributes of data quality, failure to address data users’ concerns and a lack of systematic procedures in data quality assessment. This review study is limited by the coverage of the databases and the breadth of public health information systems. Further research could develop consistent data quality definitions and attributes. More research efforts should be given to assess the quality of data use and the quality of data collection process.

A new four-step hierarchy method for combined assessment of groundwater quality and pollution.

Science.gov (United States)

Zhu, Henghua; Ren, Xiaohua; Liu, Zhizheng

2017-12-28

A new four-step hierarchy method was constructed and applied to evaluate the groundwater quality and pollution of the Dagujia River Basin. The assessment index system is divided into four types: field test indices, common inorganic chemical indices, inorganic toxicology indices, and trace organic indices. Background values of common inorganic chemical indices and inorganic toxicology indices were estimated with the cumulative-probability curve method, and the results showed that the background values of Mg 2+ (51.1 mg L -1 ), total hardness (TH) (509.4 mg L -1 ), and NO 3 - (182.4 mg L -1 ) are all higher than the corresponding grade III values of Quality Standard for Groundwater, indicating that they were poor indicators and therefore were not included in the groundwater quality assessment. The quality assessment results displayed that the field test indices were mainly classified as grade II, accounting for 60.87% of wells sampled. The indices of common inorganic chemical and inorganic toxicology were both mostly in the range of grade III, whereas the trace organic indices were predominantly classified as grade I. The variabilities and excess ratios of the indices were also calculated and evaluated. Spatial distributions showed that the groundwater with poor quality indices was mainly located in the northeast of the basin, which was well-connected with seawater intrusion. Additionally, the pollution assessment revealed that groundwater in well 44 was classified as "moderately polluted," wells 5 and 8 were "lightly polluted," and other wells were classified as "unpolluted."

The external quality assessment scheme: Five years experience as a participating laboratory

Directory of Open Access Journals (Sweden)

Chaudhary Rajendra

2010-01-01

Full Text Available Background and Aim : Quality assurance in blood banking includes active participation in the external quality program. Such a program offers valuable benefits to patient care, their safety, and an overall quality of laboratory practices. In the year 2002, we participated in the External Quality Assessment Scheme (EQAS under the World Health Organization (WHO, Bureau of Laboratory Quality Standards, Thailand. Materials and Methods: In the current study we evaluated our EQAS test result of the past five years, from 2003 to 2007. Test results of all blood samples such as ABO grouping, D typing, antibody screening, antibody identification, and transfusion transmitted infection (TTI testing were analyzed and documented. Results: Discordant results in one or more instances were observed with antibody identification, weak D testing, and tests for anti-HIV1/2 and HBsAg. Twice we failed to detect the ′anti-Mia′ antibody in the issued sample and that could be attributed to the absence of the corresponding antigen in the used cell panel. HBsAg was missed due to its critically low titer in the serum and the comparatively low sensitivity of our Enzyme-Linked Immunosorbent Assay (ELISA test kit. Conclusion: All these failures in the last five years have helped us to significantly improve our transfusion service in terms of performance evaluation, patient care and safety issues, and the overall quality of laboratory practices. We therefore recommend all laboratories and hospitals to participate in the EQAS program, which will definitely help them to improve from what they learn.

A Chinese version of the City of Hope Quality of Life-Ostomy Questionnaire: validity and reliability assessment.

Science.gov (United States)

Gao, Wenjun; Yuan, Changrong; Wang, Jichuan; Du, Jiarui; Wu, Huiqiao; Qian, Xiaojie; Hinds, Pamela S

2013-01-01

The City of Hope Quality of Life-Ostomy Questionnaire is a widely accepted scale to assess quality of life in ostomy patients. However, the validity and reliability of the Chinese version (C-COH) have not been studied. The objective of the study was to assess the validity and reliability of the C-COH among ostomy patients sampled from Shanghai from August 2010 to June 2011. Content validity was examined based on the reviews of a panel of 10 experts; test-retest was conducted to assess the item reliabilities of the scale; a pilot sample (n = 274) was selected to explore the factorial structure of the C-COH using exploratory factor analysis; a validation sample (n = 370) was selected to confirm the findings from the exploratory study using confirmatory factor analysis (CFA). Statistical package SPSS version 16.0 was used for the exploratory factor analysis, and Amos 17.0 was used for the CFA. The C-COH was developed by modifying 1 item and excluding 11 items from the original scale. Four factors/subscales (physical well-being, psychological well-being, social well-being, and spiritual well-being) were identified and confirmed in the C-COH The scale reliabilities estimated from the CFA results for the 4 subscales were 0.860, 0.885, 0.864, and 0.686, respectively. Findings support the reliability and validity of the C-COH. The C-COH could be a useful measure of the level of quality of life among Chinese patients with a stoma and may provide important intervention implications for healthcare providers to help improve the life quality of patients with a stoma.

Application of fuzzy set theory for integral assessment of agricultural products quality

Science.gov (United States)

Derkanosova, N. M.; Ponomareva, I. N.; Shurshikova, G. V.; Vasilenko, O. A.

2018-05-01

The methodology of integrated assessment of quality and safety of agricultural products, approbated by the example of indicators of wheat grain in relation to the provision of consumer properties of bakery products, was developed. Determination of the level of quality of the raw ingredients will allow direct using of agricultural raw materials for food production, taking into account ongoing technology, types of products, and, respectively, rational use of resource potential of the agricultural sector. The mathematical tool of the proposed method is a fuzzy set theory. The fuzzy classifier to evaluate the properties of the grain is formed. The set of six indicators normalized by the national standard is determined; values are ordered and represented by linguistic variables with a trapeziform membership function; the rules for calculation of membership functions are presented. Specific criteria values for individual indicators in shaping the quality of the finished products are considered. For one of the samples of wheat grain values of membership; functions of the linguistic variable "level" for all indicators and the linguistic variable "level of quality" were calculated. It is established that the studied sample of grain obtains the 2 (average) level of quality. Accordingly, it can be recommended for the production of bakery products with higher requirements for the structural-mechanical properties bakery and puff pastry products hearth bread and flour confectionery products of the group of hard dough cookies and crackers

Quality Assessment of Compressed Video for Automatic License Plate Recognition

DEFF Research Database (Denmark)

Ukhanova, Ann; Støttrup-Andersen, Jesper; Forchhammer, Søren

2014-01-01

Definition of video quality requirements for video surveillance poses new questions in the area of quality assessment. This paper presents a quality assessment experiment for an automatic license plate recognition scenario. We explore the influence of the compression by H.264/AVC and H.265/HEVC s...... recognition in our study has a behavior similar to human recognition, allowing the use of the same mathematical models. We furthermore propose an application of one of the models for video surveillance systems......Definition of video quality requirements for video surveillance poses new questions in the area of quality assessment. This paper presents a quality assessment experiment for an automatic license plate recognition scenario. We explore the influence of the compression by H.264/AVC and H.265/HEVC...... standards on the recognition performance. We compare logarithmic and logistic functions for quality modeling. Our results show that a logistic function can better describe the dependence of recognition performance on the quality for both compression standards. We observe that automatic license plate...

An assessment of service quality among internal customers : the case of the Botswana Mascom wireless company / Julia Mpopi Mogotsi

OpenAIRE

Mogotsi, Julia Mpopi

2012-01-01

The general objective of this study is to assess the internal service quality at Mascom Wireless. Both qualitative and quantitative research methods were used to establish the number of employees who are not happy with their internal service quality and to find out what they suggest could be done to solve the problems that exist. A total of 110 employees out of 280 were given the questionnaire and only 64 of the sampled people responded . A random sampling technique was used to...

Multiple category-lot quality assurance sampling: a new classification system with application to schistosomiasis control.

Directory of Open Access Journals (Sweden)

Casey Olives

Full Text Available Originally a binary classifier, Lot Quality Assurance Sampling (LQAS has proven to be a useful tool for classification of the prevalence of Schistosoma mansoni into multiple categories (≤10%, >10 and <50%, ≥50%, and semi-curtailed sampling has been shown to effectively reduce the number of observations needed to reach a decision. To date the statistical underpinnings for Multiple Category-LQAS (MC-LQAS have not received full treatment. We explore the analytical properties of MC-LQAS, and validate its use for the classification of S. mansoni prevalence in multiple settings in East Africa.We outline MC-LQAS design principles and formulae for operating characteristic curves. In addition, we derive the average sample number for MC-LQAS when utilizing semi-curtailed sampling and introduce curtailed sampling in this setting. We also assess the performance of MC-LQAS designs with maximum sample sizes of n=15 and n=25 via a weighted kappa-statistic using S. mansoni data collected in 388 schools from four studies in East Africa.Overall performance of MC-LQAS classification was high (kappa-statistic of 0.87. In three of the studies, the kappa-statistic for a design with n=15 was greater than 0.75. In the fourth study, where these designs performed poorly (kappa-statistic less than 0.50, the majority of observations fell in regions where potential error is known to be high. Employment of semi-curtailed and curtailed sampling further reduced the sample size by as many as 0.5 and 3.5 observations per school, respectively, without increasing classification error.This work provides the needed analytics to understand the properties of MC-LQAS for assessing the prevalance of S. mansoni and shows that in most settings a sample size of 15 children provides a reliable classification of schools.

Sampling for quality assurance of grading decisions in diabetic retinopathy screening: designing the system to detect errors.

Science.gov (United States)

Slattery, Jim

2005-01-01

To evaluate various designs for a quality assurance system to detect and control human errors in a national screening programme for diabetic retinopathy. A computer simulation was performed of some possible ways of sampling the referral decisions made during grading and of different criteria for initiating more intensive QA investigations. The effectiveness of QA systems was assessed by the ability to detect a grader making occasional errors in referral. Substantial QA sample sizes are needed to ensure against inappropriate failure to refer. Detection of a grader who failed to refer one in ten cases can be achieved with a probability of 0.58 using an annual sample size of 300 and 0.77 using a sample size of 500. An unmasked verification of a sample of non-referrals by a specialist is the most effective method of internal QA for the diabetic retinopathy screening programme. Preferential sampling of those with some degree of disease may improve the efficiency of the system.

E-Services quality assessment framework for collaborative networks

Science.gov (United States)

Stegaru, Georgiana; Danila, Cristian; Sacala, Ioan Stefan; Moisescu, Mihnea; Mihai Stanescu, Aurelian

2015-08-01

In a globalised networked economy, collaborative networks (CNs) are formed to take advantage of new business opportunities. Collaboration involves shared resources and capabilities, such as e-Services that can be dynamically composed to automate CN participants' business processes. Quality is essential for the success of business process automation. Current approaches mostly focus on quality of service (QoS)-based service selection and ranking algorithms, overlooking the process of service composition which requires interoperable, adaptable and secure e-Services to ensure seamless collaboration, data confidentiality and integrity. Lack of assessment of these quality attributes can result in e-Service composition failure. The quality of e-Service composition relies on the quality of each e-Service and on the quality of the composition process. Therefore, there is the need for a framework that addresses quality from both views: product and process. We propose a quality of e-Service composition (QoESC) framework for quality assessment of e-Service composition for CNs which comprises of a quality model for e-Service evaluation and guidelines for quality of e-Service composition process. We implemented a prototype considering a simplified telemedicine use case which involves a CN in e-Healthcare domain. To validate the proposed quality-driven framework, we analysed service composition reliability with and without using the proposed framework.

Mars Sample Return Architecture Assessment Study

Science.gov (United States)

Centuori, S.; Hermosín, P.; Martín, J.; De Zaiacomo, G.; Colin, S.; Godfrey, A.; Myles, J.; Johnson, H.; Sachdev, T.; Ahmed, R.

2018-04-01

Current paper presents the results of ESA funded activity "Mars Sample Return Architecture Assessment Study" carried-out by DEIMOS Space, Lockheed Martin UK Ampthill, and MDA Corporation, where more than 500 mission design options have been studied.

Supporting visual quality assessment with machine learning

NARCIS (Netherlands)

Gastaldo, P.; Zunino, R.; Redi, J.

2013-01-01

Objective metrics for visual quality assessment often base their reliability on the explicit modeling of the highly non-linear behavior of human perception; as a result, they may be complex and computationally expensive. Conversely, machine learning (ML) paradigms allow to tackle the quality

the research quality plus (rq+) assessment instrument

International Development Research Centre (IDRC) Digital Library (Canada)

Thomas Schwandt

THE RESEARCH QUALITY PLUS (RQ+) ASSESSMENT INSTRUMENT ... consistent way to allow for further meta-analysis about research quality over time. ... Addresses complex and integrative problems, requiring systems-based approaches ..... benefits or financial costs for participants that might not be appropriate in the ...

Oral health-related quality of life of a consecutive sample of Spanish dental patients.

Science.gov (United States)

Montero, Javier; Yarte, José-María; Bravo, Manuel; López-Valverde, Antonio

2011-09-01

Assessment of the oral health-related quality of life and the modulating factors of patients demanding dental treatment in the city of Salamanca, through the use of two validated instruments: the OIDP-sp (Oral Impacts on Daily Performance) and OHIP-14 (Oral Health Impact Profile). the study was conducted on a consecutive sample of 200 patients aged 18-65 years visiting an Integral Dental Centre in the city of Salamanca. Two validated instruments (OIDP-sp and OHIP-14) were used to measure the oral health-related quality of life. An analogue visual scale was used to register oral satisfaction. Data on sociodemographic background, behavioural and clinical factors were also gathered. ANOVA, T Student Test, and both Pearson and Spearman correlations coefficients were used for the statistical analysis. according to the OIDP, 68.5% suffered from some kind of impact in their oral quality of life, while impact prevalence with the OHIP was 85%. Some other factors influencing the quality of life and degree of satisfaction were revealed. patients over 45 years, regardless of their gender, from high social class, living in rural areas and with poor hygiene, showed higher impact and lower satisfaction. The study also revealed some clinical conditions closely related to the level of satisfaction.

Lot quality assurance sampling to monitor supplemental immunization activity quality: an essential tool for improving performance in polio endemic countries.

Science.gov (United States)

Brown, Alexandra E; Okayasu, Hiromasa; Nzioki, Michael M; Wadood, Mufti Z; Chabot-Couture, Guillaume; Quddus, Arshad; Walker, George; Sutter, Roland W

2014-11-01

Monitoring the quality of supplementary immunization activities (SIAs) is a key tool for polio eradication. Regular monitoring data, however, are often unreliable, showing high coverage levels in virtually all areas, including those with ongoing virus circulation. To address this challenge, lot quality assurance sampling (LQAS) was introduced in 2009 as an additional tool to monitor SIA quality. Now used in 8 countries, LQAS provides a number of programmatic benefits: identifying areas of weak coverage quality with statistical reliability, differentiating areas of varying coverage with greater precision, and allowing for trend analysis of campaign quality. LQAS also accommodates changes to survey format, interpretation thresholds, evaluations of sample size, and data collection through mobile phones to improve timeliness of reporting and allow for visualization of campaign quality. LQAS becomes increasingly important to address remaining gaps in SIA quality and help focus resources on high-risk areas to prevent the continued transmission of wild poliovirus. © Crown copyright 2014.

Multidrug resistance among new tuberculosis cases: detecting local variation through lot quality-assurance sampling.

Science.gov (United States)

Hedt, Bethany Lynn; van Leth, Frank; Zignol, Matteo; Cobelens, Frank; van Gemert, Wayne; Nhung, Nguyen Viet; Lyepshina, Svitlana; Egwaga, Saidi; Cohen, Ted

2012-03-01

Current methodology for multidrug-resistant tuberculosis (MDR TB) surveys endorsed by the World Health Organization provides estimates of MDR TB prevalence among new cases at the national level. On the aggregate, local variation in the burden of MDR TB may be masked. This paper investigates the utility of applying lot quality-assurance sampling to identify geographic heterogeneity in the proportion of new cases with multidrug resistance. We simulated the performance of lot quality-assurance sampling by applying these classification-based approaches to data collected in the most recent TB drug-resistance surveys in Ukraine, Vietnam, and Tanzania. We explored 3 classification systems- two-way static, three-way static, and three-way truncated sequential sampling-at 2 sets of thresholds: low MDR TB = 2%, high MDR TB = 10%, and low MDR TB = 5%, high MDR TB = 20%. The lot quality-assurance sampling systems identified local variability in the prevalence of multidrug resistance in both high-resistance (Ukraine) and low-resistance settings (Vietnam). In Tanzania, prevalence was uniformly low, and the lot quality-assurance sampling approach did not reveal variability. The three-way classification systems provide additional information, but sample sizes may not be obtainable in some settings. New rapid drug-sensitivity testing methods may allow truncated sequential sampling designs and early stopping within static designs, producing even greater efficiency gains. Lot quality-assurance sampling study designs may offer an efficient approach for collecting critical information on local variability in the burden of multidrug-resistant TB. Before this methodology is adopted, programs must determine appropriate classification thresholds, the most useful classification system, and appropriate weighting if unbiased national estimates are also desired.

42 CFR 460.136 - Internal quality assessment and performance improvement activities.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Internal quality assessment and performance improvement activities. 460.136 Section 460.136 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES....136 Internal quality assessment and performance improvement activities. (a) Quality assessment and...

Rapid habitability assessment of Mars samples by pyrolysis-FTIR

Science.gov (United States)

Gordon, Peter R.; Sephton, Mark A.

2016-02-01

Pyrolysis Fourier transform infrared spectroscopy (pyrolysis FTIR) is a potential sample selection method for Mars Sample Return missions. FTIR spectroscopy can be performed on solid and liquid samples but also on gases following preliminary thermal extraction, pyrolysis or gasification steps. The detection of hydrocarbon and non-hydrocarbon gases can reveal information on sample mineralogy and past habitability of the environment in which the sample was created. The absorption of IR radiation at specific wavenumbers by organic functional groups can indicate the presence and type of any organic matter present. Here we assess the utility of pyrolysis-FTIR to release water, carbon dioxide, sulfur dioxide and organic matter from Mars relevant materials to enable a rapid habitability assessment of target rocks for sample return. For our assessment a range of minerals were analyzed by attenuated total reflectance FTIR. Subsequently, the mineral samples were subjected to single step pyrolysis and multi step pyrolysis and the products characterised by gas phase FTIR. Data from both single step and multi step pyrolysis-FTIR provide the ability to identify minerals that reflect habitable environments through their water and carbon dioxide responses. Multi step pyrolysis-FTIR can be used to gain more detailed information on the sources of the liberated water and carbon dioxide owing to the characteristic decomposition temperatures of different mineral phases. Habitation can be suggested when pyrolysis-FTIR indicates the presence of organic matter within the sample. Pyrolysis-FTIR, therefore, represents an effective method to assess whether Mars Sample Return target rocks represent habitable conditions and potential records of habitation and can play an important role in sample triage operations.

Development and testing of a scale for assessing the quality of home nursing.

Science.gov (United States)

Chiou, Chii-Jun; Wang, Hsiu-Hung; Chang, Hsing-Yi

2016-03-01

To develop a home nursing quality scale and to evaluate its psychometric properties. This was a 3-year study. In the first year, 19 focus group interviews with caregivers of people using home nursing services were carried out in northern, central and southern Taiwan. Content analysis was carried out and a pool of questionnaire items compiled. In the second year (2007), study was carried out on a stratified random sample selected from home nursing organizations covered by the national health insurance scheme in southern Taiwan. The study population was the co-resident primary caregivers of home care nursing service users. Item analysis and exploratory factor analysis were carried out on data from 365 self-administered questionnaires collected from 13 selected home care organizations. In the third year (2008), a random sample of participants was selected from 206 hospital-based home care nursing organizations throughout Taiwan, resulting in completion of 294 questionnaires from 27 organizations. Confirmatory factor analysis was then carried out on the scale, and the validity and reliability of the scale assessed. The present study developed a reliable and valid home nursing quality scale from the perspective of users of home nursing services. The scale comprised three factors: dependability, communication skills and service usefulness. This scale is of practical value for the promotion of long-term community care aging in local policies. The scale is ready to be used to assess the quality of services provided by home care nursing organizations. © 2015 Japan Geriatrics Society.

External quality assessment on detection of hepatitis C virus RNA in clinical laboratories of China.

Science.gov (United States)

Wang, Lu-nan; Zhang, Rui; Shen, Zi-yu; Chen, Wen-xiang; Li, Jin-ming

2008-06-05

As with many studies carried out in European countries, a quality assurance program has been established by the National Center for Clinical Laboratories in China (NCCL). The results showed that the external quality assessment significantly improves laboratory performance for quantitative evaluation of hepatitis C virus (HCV) RNA. Serum panels were delivered twice annually to the clinical laboratories which performed HCV RNA detection in China. Each panel made up of 5 coded samples. All laboratories were requested to carry out the detection within the required time period and report on testing results which contained qualitative and/or quantitative test findings, reagents used and relevant information about apparatus. All the positive samples were calibrated against the first International Standard for HCV RNA in a collaborative study and the range of comparison target value (TG) designated as +/- 0.5 log. The numbers of laboratories reporting on qualitative testing results for the first and second time external quality assessment were 168 and 167 in the year of 2003 and increased to 209 and 233 in 2007; the numbers of laboratories reporting on quantitative testing results were 134 and 147 in 2003 and rose to 340 and 339 in 2007. Deviation between the mean value for quantitative results at home in 2003 and the target value was above 0.5 log, which was comparatively high. By 2007, the target value was close to the national average except for the low concentrated specimens (10(3) IU/ml). The percentage of results within the range of GM +/- 0.5 log(10) varied from 8.2% to 93.5%. Some laboratories had some difficulties in the exact quantification of the lowest (3.00 log IU/ml) as well as of the highest viral levels (6.37 log IU/ml) values, very near to the limits of the dynamic range of the assays. The comparison of these results with the previous study confirms that a regular participation in external quality assessment (EQA) assures the achievement of a high

Developing and validating a psychometric scale for image quality assessment

International Nuclear Information System (INIS)

Mraity, H.; England, A.; Hogg, P.

2014-01-01

Purpose: Using AP pelvis as a catalyst, this paper explains how a psychometric scale for image quality assessment can be created using Bandura's theory for self-efficacy. Background: Establishing an accurate diagnosis is highly dependent upon the quality of the radiographic image. Image quality, as a construct (i.e. set of attributes that makes up the image quality), continues to play an essential role in the field of diagnostic radiography. The process of assessing image quality can be facilitated by using criteria, such as the European Commission (EC) guidelines for quality criteria as published in 1996. However, with the advent of new technology (Computed Radiography and Digital Radiography), some of the EC criteria may no longer be suitable for assessing the visual quality of a digital radiographic image. Moreover, a lack of validated visual image quality scales in the literature can also lead to significant variations in image quality evaluation. Creating and validating visual image quality scales, using a robust methodology, could reduce variability and improve the validity and reliability of perceptual image quality evaluations

Study on a pattern classification method of soil quality based on simplified learning sample dataset

Science.gov (United States)

Zhang, Jiahua; Liu, S.; Hu, Y.; Tian, Y.

2011-01-01

Based on the massive soil information in current soil quality grade evaluation, this paper constructed an intelligent classification approach of soil quality grade depending on classical sampling techniques and disordered multiclassification Logistic regression model. As a case study to determine the learning sample capacity under certain confidence level and estimation accuracy, and use c-means algorithm to automatically extract the simplified learning sample dataset from the cultivated soil quality grade evaluation database for the study area, Long chuan county in Guangdong province, a disordered Logistic classifier model was then built and the calculation analysis steps of soil quality grade intelligent classification were given. The result indicated that the soil quality grade can be effectively learned and predicted by the extracted simplified dataset through this method, which changed the traditional method for soil quality grade evaluation. ?? 2011 IEEE.

Doctors or technicians: assessing quality of medical education.

Science.gov (United States)

Hasan, Tayyab

2010-01-01

Medical education institutions usually adapt industrial quality management models that measure the quality of the process of a program but not the quality of the product. The purpose of this paper is to analyze the impact of industrial quality management models on medical education and students, and to highlight the importance of introducing a proper educational quality management model. Industrial quality management models can measure the training component in terms of competencies, but they lack the educational component measurement. These models use performance indicators to assess their process improvement efforts. Researchers suggest that the performance indicators used in educational institutions may only measure their fiscal efficiency without measuring the quality of the educational experience of the students. In most of the institutions, where industrial models are used for quality assurance, students are considered as customers and are provided with the maximum services and facilities possible. Institutions are required to fulfill a list of recommendations from the quality control agencies in order to enhance student satisfaction and to guarantee standard services. Quality of medical education should be assessed by measuring the impact of the educational program and quality improvement procedures in terms of knowledge base development, behavioral change, and patient care. Industrial quality models may focus on academic support services and processes, but educational quality models should be introduced in parallel to focus on educational standards and products.

Efficient sampling to determine the distribution of fruit quality and yield in a commercial apple orchard

DEFF Research Database (Denmark)

Martinez, M.; Wulfsohn, Dvora-Laio; Zamora, I.

2012-01-01

In situ assessment of fruit quality and yield can provide critical data for marketing and for logistical planning of the harvest, as well as for site-specific management. Our objective was to develop and validate efficient field sampling procedures for this purpose. We used the previously reported...... 'fractionator' tree sampling procedure and supporting handheld software (Gardi et al., 2007; Wulfsohn et al., 2012) to obtain representative samples of fruit from a 7.6-ha apple orchard (Malus ×domestica 'Fuji Raku Raku') in central Chile. The resulting sample consisted of 70 fruit on 56 branch segments...... of yield. Estimated marketable yield was 295.8±50.2 t. Field and packinghouse records indicated that of 348.2 t sent to packing (52.4 t or 15% higher than our estimate), 263.0 t was packed for export (32.8 t less or -12% error compared to our estimate). The estimated distribution of caliber compared very...

The art of assessing quality for images and video

International Nuclear Information System (INIS)

Deriche, M.

2011-01-01

The early years of this century have witnessed a tremendous growth in the use of digital multimedia data for di?erent communication applications. Researchers from around the world are spending substantial research efforts in developing techniques for improving the appearance of images/video. However, as we know, preserving high quality is a challenging task. Images are subject to distortions during acquisition, compression, transmission, analysis, and reconstruction. For this reason, the research area focusing on image and video quality assessment has attracted a lot of attention in recent years. In particular, compression applications and other multimedia applications need powerful techniques for evaluating quality objectively without human interference. This tutorial will cover the di?erent faces of image quality assessment. We will motivate the need for robust image quality assessment techniques, then discuss the main algorithms found in the literature with a critical perspective. We will present the di?erent metrics used for full reference, reduced reference and no reference applications. We will then discuss the difference between image and video quality assessment. In all of the above, we will take a critical approach to explain which metric can be used for which application. Finally we will discuss the different approaches to analyze the performance of image/video quality metrics, and end the tutorial with some perspectives on newly introduced metrics and their potential applications.

A research review of quality assessment for software

Science.gov (United States)

1991-01-01

Measures were recommended to assess the quality of software submitted to the AdaNet program. The quality factors that are important to software reuse are explored and methods of evaluating those factors are discussed. Quality factors important to software reuse are: correctness, reliability, verifiability, understandability, modifiability, and certifiability. Certifiability is included because the documentation of many factors about a software component such as its efficiency, portability, and development history, constitute a class for factors important to some users, not important at all to other, and impossible for AdaNet to distinguish between a priori. The quality factors may be assessed in different ways. There are a few quantitative measures which have been shown to indicate software quality. However, it is believed that there exists many factors that indicate quality and have not been empirically validated due to their subjective nature. These subjective factors are characterized by the way in which they support the software engineering principles of abstraction, information hiding, modularity, localization, confirmability, uniformity, and completeness.

Methodology for Assessing the Quality of Agribusiness Activity Based on the Environmentally Responsible Approach

Directory of Open Access Journals (Sweden)

Anna Antonovna Anfinogentova

2017-06-01

Full Text Available The article is devoted to the research and development of quality evaluation methods of agro-industrial enterprises activity in the regional economy with the use of the ecological approach. The hypothesis of the study is that the activity of the economic entities (as well as of agribusiness must be assessed not only in the context of economic efficiency and effectiveness, but also in the context of environmental ethics and environmental aggression. As the initial data, we have used the indicators of economic statistics of Russian agrarian-oriented regions, as well as the data received from management reporting on the sample of enterprises of three regions (the Belgorod and Moscow regions, Krasnodar Territory. The article offers the economic and mathematical approach for measuring the level of the environmental responsibility of agro-industrial enterprises on the basic formula of the Mandelbrot set and statistical indicator of Hurst. Our scientific contribution is the development of a modified methodology for assessing the quality of the activity of agro-industrial enterprises using the parameter characterizing the level of environmental ethics and environmental aggression of these entities. The main result of the study is the approbation of the method, which has shown its practical applicability and relative coherence with certain indicators of regional ecological statistics. The proposed method is characterized by the integration of the different mathematical approaches and as an adaptive assessment tool that can be used to assess the quality of the activity of both agro-industrial enterprises and enterprises of other industries and fields of the economy. In the further works, the authors plan to develop methodological approaches to the assessment of the quality of agro-industrial products. At the same time, the main attention will be paid to the ecological and social component of the quality.

Association between product quality control and process quality control of bulk milk

NARCIS (Netherlands)

Velthuis, A.; Asseldonk, van M.A.P.M.

2010-01-01

Assessment of dairy-milk quality is based on product quality control (testing bulk-milk samples) and process quality control (auditing dairy farms). It is unknown whether process control improves product quality. To quantify possible association between product control and process control a

Quality assessments for cancer centers in the European Union.

Science.gov (United States)

Wind, Anke; Rajan, Abinaya; van Harten, Wim H

2016-09-07

Cancer centers are pressured to deliver high-quality services that can be measured and improved, which has led to an increase of assessments in many countries. A critical area of quality improvement is to improve patient outcome. An overview of existing assessments can help stakeholders (e.g., healthcare professionals, managers and policy makers) improve the quality of cancer research and care and lead to patient benefits. This paper presents key aspects of assessments undertaken by European cancer centers, such as: are assessments mandatory or voluntary? Do they focus on evaluating research, care or both? And are they international or national? A survey was sent to 33 cancer centers in 28 European Union member states. Participants were asked to score the specifics for each assessment that they listed. Based on the responses from 19 cancer centers from 18 member states, we found 109 assessments. The numbers have steadily increased from 1990's till 2015. Although, a majority of assessments are on patient-care aspects (n = 45), it is unclear how many of those include assessing patient benefits. Only few assessments cover basic research. There is an increasing trend towards mixed assessments (i.e., combining research and patient-care aspects) The need for assessments in cancer centers is increasing. To improve efforts in the quality of research and patient care and to prevent new assessments that "reinvent the wheel", it is advised to start comparative research into the assessments that are likely to bring patient benefits and improve patient outcome. Do assessments provide consistent and reliable information that create added value for all key stakeholders?

Comparison of Different Matrices as Potential Quality Control Samples for Neurochemical Dementia Diagnostics

NARCIS (Netherlands)

Lelental, Natalia; Brandner, Sebastian; Kofanova, Olga; Blennow, Kaj; Zetterberg, Henrik; Andreasson, Ulf; Engelborghs, Sebastiaan; Mroczko, Barbara; Gabryelewicz, Tomasz; Teunissen, Charlotte; Mollenhauer, Brit; Parnetti, Lucilla; Chiasserini, Davide; Molinuevo, Jose Luis; Perret-Liaudet, Armand; Verbeek, Marcel M.; Andreasen, Niels; Brosseron, Frederic; Bahl, Justyna M. C.; Herukka, Sanna-Kaisa; Hausner, Lucrezia; Froelich, Lutz; Labonte, Anne; Poirier, Judes; Miller, Anne-Marie; Zilka, Norbert; Kovacech, Branislav; Urbani, Andrea; Suardi, Silvia; Oliveira, Catarina; Baldeiras, Ines; Dubois, Bruno; Rot, Uros; Lehmann, Sylvain; Skinningsrud, Anders; Betsou, Fay; Wiltfang, Jens; Gkatzima, Olymbia; Winblad, Bengt; Buchfelder, Michael; Kornhuber, Johannes; Lewczuk, Piotr

2016-01-01

Background: Assay-vendor independent quality control (QC) samples for neurochemical dementia diagnostics (NDD) biomarkers are so far commercially unavailable. This requires that NDD laboratories prepare their own QC samples, for example by pooling leftover cerebrospinal fluid (CSF) samples.

Assessment of Power Quality Problems for TRIGA PUSPATI Reactor (RTP)

International Nuclear Information System (INIS)

Mohd Fazli Zakaria; Ramachandaramurthy, V.K.

2016-01-01

The electrical power systems are exposed to different types of power quality disturbances. Investigation and monitoring of power quality is necessary to maintain accurate operation of sensitive equipment especially for nuclear installations. This paper will discuss the power quality problems observed at the electrical sources of PUSPATI TRIGA Reactor (RTP). Assessment of power quality requires the identification of any anomalous behavior on a power system, which adversely affects the normal operation of electrical or electronic equipment. A power quality assessment involves gathering data resources; analyzing the data (with reference to power quality standards) then, if problems exist, recommendation of mitigation techniques must be considered. Field power quality data is collected by power quality recorder and analyzed with reference to power quality standards. Normally the electrical power is supplied to the RTP via two sources in order to keep a good reliability where each of them is designed to carry the full load. The assessment of power quality during reactor operation was performed for both electrical sources. There were several disturbances such as voltage harmonics and flicker that exceeded the thresholds. (author)

Brain imaging with synthetic MR in children: clinical quality assessment

Energy Technology Data Exchange (ETDEWEB)

Betts, Aaron M.; Serai, Suraj [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States); Leach, James L.; Jones, Blaise V. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States); University of Cincinnati College of Medicine, Cincinnati, OH (United States); Zhang, Bin [Cincinnati Children' s Hospital Medical Center, Biostatistics and Epidemiology, Cincinnati, OH (United States)

2016-10-15

Synthetic magnetic resonance imaging is a quantitative imaging technique that measures inherent T1-relaxation, T2-relaxation, and proton density. These inherent tissue properties allow synthesis of various imaging sequences from a single acquisition. Clinical use of synthetic MR imaging has been described in adult populations. However, use of synthetic MR imaging has not been previously reported in children. The purpose of this study is to report our assessment of diagnostic image quality using synthetic MR imaging in children. Synthetic MR acquisition was obtained in a sample of children undergoing brain MR imaging. Image quality assessments were performed on conventional and synthetic T1-weighted, T2-weighted, and FLAIR images. Standardized linear measurements were performed on conventional and synthetic T2 images. Estimates of patient age based upon myelination patterns were also performed. Conventional and synthetic MR images were evaluated on 30 children. Using a 4-point assessment scale, conventional imaging performed better than synthetic imaging for T1-weighted, T2-weighted, and FLAIR images. When the assessment was simplified to a dichotomized scale, the conventional and synthetic T1-weighted and T2-weighted images performed similarly. However, the superiority of conventional FLAIR images persisted in the dichotomized assessment. There were no statistically significant differences between linear measurements made on T2-weighted images. Estimates of patient age based upon pattern of myelination were also similar between conventional and synthetic techniques. Synthetic MR imaging may be acceptable for clinical use in children. However, users should be aware of current limitations that could impact clinical utility in the software version used in this study. (orig.)

A systematic literature review of open source software quality assessment models.

Science.gov (United States)

Adewumi, Adewole; Misra, Sanjay; Omoregbe, Nicholas; Crawford, Broderick; Soto, Ricardo

2016-01-01

Many open source software (OSS) quality assessment models are proposed and available in the literature. However, there is little or no adoption of these models in practice. In order to guide the formulation of newer models so they can be acceptable by practitioners, there is need for clear discrimination of the existing models based on their specific properties. Based on this, the aim of this study is to perform a systematic literature review to investigate the properties of the existing OSS quality assessment models by classifying them with respect to their quality characteristics, the methodology they use for assessment, and their domain of application so as to guide the formulation and development of newer models. Searches in IEEE Xplore, ACM, Science Direct, Springer and Google Search is performed so as to retrieve all relevant primary studies in this regard. Journal and conference papers between the year 2003 and 2015 were considered since the first known OSS quality model emerged in 2003. A total of 19 OSS quality assessment model papers were selected. To select these models we have developed assessment criteria to evaluate the quality of the existing studies. Quality assessment models are classified into five categories based on the quality characteristics they possess namely: single-attribute, rounded category, community-only attribute, non-community attribute as well as the non-quality in use models. Our study reflects that software selection based on hierarchical structures is found to be the most popular selection method in the existing OSS quality assessment models. Furthermore, we found that majority (47%) of the existing models do not specify any domain of application. In conclusion, our study will be a valuable contribution to the community and helps the quality assessment model developers in formulating newer models and also to the practitioners (software evaluators) in selecting suitable OSS in the midst of alternatives.

Water Quality Assessment and Total Maximum Daily Loads Information (ATTAINS)

Data.gov (United States)

U.S. Environmental Protection Agency — The Water Quality Assessment TMDL Tracking And Implementation System (ATTAINS) stores and tracks state water quality assessment decisions, Total Maximum Daily Loads...

Comparison of test specific sediment effect concentrations with marine sediment quality assessment guidelines

International Nuclear Information System (INIS)

Carr, R.S.; Biedenbach, J.M.; MacDonald, D.D.

1995-01-01

As part of NOAA's National Status and Trends (NS and T) Bioeffects Assessment program and studies conducted by the National Biological Service, numerous sediment quality assessment surveys have recently been conducted along the Atlantic and Gulf coasts of the US using the sea urchin (Arbacia punctulata) fertilization and embryological development tests with pore water. Additional toxicity tests were also conducted in conjunction with most of these studies. The areas that have been sampled include Boston harbor, Massachusetts; Charleston Harbor, Winyah Bay, and Savannah River, South Carolina; St. Simon Sound, Georgia; Biscayne Bay, Tampa Bay, Choctawhatchee Bay, Apalachicola Bay, St. Andrew Bay, and Pensacola Bay, Florida; Galveston Bay, Lavaca Bay, and Sabine Lake, Texas, and 200 stations in the vicinity of offshore oil and gas production platforms in the Gulf of Mexico. Sufficient data are now available from this series of surveys to calculate test specific sediment effect concentrations (SECs). Based on these recent studies, SECs were developed for the sea urchin porewater and amphipod tests and compared with existing marine sediment quality assessment guidelines

Assessment of heavy metal contamination and sediment quality in the Cimadur river, Banten

International Nuclear Information System (INIS)

Rina Mulyaningsih; Siti Suprapti

2015-01-01

River sediment quality assessment can be done by the calculation of pollution index. The existence of gold mining activities in Cikotok suspected to have an impact on Cimadur river quality degradation. Calculations pollution index by heavy metal Hg, As, Cr, Co and Zn contained in river sediment Cimadur Cikotok Banten have been performed. Sediment sampling has conducted at 9 locations along the Cimadur River. Quantification of heavy metals in the samples was done by using the neutron activation analysis technique. The result of assessment based on enrichment factor showed that there has been an increase in concentration of heavy metals Hg, As, Cr, Co and Zn due to anthropogenic factors. Based on the value of index geo accumulation it was known that the sampling location has been polluted, predominantly by Hg and As. Heavy metals contained in the sediments provide ecological risk to the environment with following order: Cr < Zn < As < Hg. Based on the value of pollution load index (PLI), all locations were polluted by heavy metals Hg, As, Cr, Co and Zn. The sources of heavy metals could be from natural rocks or gold mining activities. Evaluation based on potential ecological risk index, showed that heavy metal pollution will give impact of ecological risk to the surrounding environment from low level to high, so it is necessary to do environmental monitoring and management appropriate for reducing the pollution in that location. (author)

42 CFR 493.1299 - Standard: Postanalytic systems quality assessment.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Postanalytic systems quality assessment. 493.1299 Section 493.1299 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH....1291. (b) The postanalytic systems quality assessment must include a review of the effectiveness of...

42 CFR 493.1249 - Standard: Preanalytic systems quality assessment.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Preanalytic systems quality assessment. 493.1249 Section 493.1249 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH....1241 through 493.1242. (b) The preanalytic systems quality assessment must include a review of the...

Food quality assessment in parent-offspring dyads

DEFF Research Database (Denmark)

Bech-Larsen, Tino; Jensen, Birger Boutrup

When the buyer and the consumer of a food product are not identical, the risk of discrepancies between food quality expectations and experiences is even higher. We introduce the concept of dyadic quality assessment and apply it to an exploration of parents' willingness to pay for new and healthier...

Analysis of quality raw data of second generation sequencers with Quality Assessment Software.

Science.gov (United States)

Ramos, Rommel Tj; Carneiro, Adriana R; Baumbach, Jan; Azevedo, Vasco; Schneider, Maria Pc; Silva, Artur

2011-04-18

Second generation technologies have advantages over Sanger; however, they have resulted in new challenges for the genome construction process, especially because of the small size of the reads, despite the high degree of coverage. Independent of the program chosen for the construction process, DNA sequences are superimposed, based on identity, to extend the reads, generating contigs; mismatches indicate a lack of homology and are not included. This process improves our confidence in the sequences that are generated. We developed Quality Assessment Software, with which one can review graphs showing the distribution of quality values from the sequencing reads. This software allow us to adopt more stringent quality standards for sequence data, based on quality-graph analysis and estimated coverage after applying the quality filter, providing acceptable sequence coverage for genome construction from short reads. Quality filtering is a fundamental step in the process of constructing genomes, as it reduces the frequency of incorrect alignments that are caused by measuring errors, which can occur during the construction process due to the size of the reads, provoking misassemblies. Application of quality filters to sequence data, using the software Quality Assessment, along with graphing analyses, provided greater precision in the definition of cutoff parameters, which increased the accuracy of genome construction.