WorldWideScience

Sample records for sample performance survey

  1. Optimal sampling designs for large-scale fishery sample surveys in Greece

    Directory of Open Access Journals (Sweden)

    G. BAZIGOS

    2007-12-01

    The paper deals with the optimization of the following three large scale sample surveys: biological sample survey of commercial landings (BSCL, experimental fishing sample survey (EFSS, and commercial landings and effort sample survey (CLES.

  2. A Bayesian Justification for Random Sampling in Sample Survey

    Directory of Open Access Journals (Sweden)

    Glen Meeden

    2012-07-01

    Full Text Available In the usual Bayesian approach to survey sampling the sampling design, plays a minimal role, at best. Although a close relationship between exchangeable prior distributions and simple random sampling has been noted; how to formally integrate simple random sampling into the Bayesian paradigm is not clear. Recently it has been argued that the sampling design can be thought of as part of a Bayesian's prior distribution. We will show here that under this scenario simple random sample can be given a Bayesian justification in survey sampling.

  3. Galaxy redshift surveys with sparse sampling

    International Nuclear Information System (INIS)

    Chiang, Chi-Ting; Wullstein, Philipp; Komatsu, Eiichiro; Jee, Inh; Jeong, Donghui; Blanc, Guillermo A.; Ciardullo, Robin; Gronwall, Caryl; Hagen, Alex; Schneider, Donald P.; Drory, Niv; Fabricius, Maximilian; Landriau, Martin; Finkelstein, Steven; Jogee, Shardha; Cooper, Erin Mentuch; Tuttle, Sarah; Gebhardt, Karl; Hill, Gary J.

    2013-01-01

    Survey observations of the three-dimensional locations of galaxies are a powerful approach to measure the distribution of matter in the universe, which can be used to learn about the nature of dark energy, physics of inflation, neutrino masses, etc. A competitive survey, however, requires a large volume (e.g., V survey ∼ 10Gpc 3 ) to be covered, and thus tends to be expensive. A ''sparse sampling'' method offers a more affordable solution to this problem: within a survey footprint covering a given survey volume, V survey , we observe only a fraction of the volume. The distribution of observed regions should be chosen such that their separation is smaller than the length scale corresponding to the wavenumber of interest. Then one can recover the power spectrum of galaxies with precision expected for a survey covering a volume of V survey (rather than the volume of the sum of observed regions) with the number density of galaxies given by the total number of observed galaxies divided by V survey (rather than the number density of galaxies within an observed region). We find that regularly-spaced sampling yields an unbiased power spectrum with no window function effect, and deviations from regularly-spaced sampling, which are unavoidable in realistic surveys, introduce calculable window function effects and increase the uncertainties of the recovered power spectrum. On the other hand, we show that the two-point correlation function (pair counting) is not affected by sparse sampling. While we discuss the sparse sampling method within the context of the forthcoming Hobby-Eberly Telescope Dark Energy Experiment, the method is general and can be applied to other galaxy surveys

  4. Air sampling system for airborne surveys

    International Nuclear Information System (INIS)

    Jupiter, C.; Tipton, W.J.

    1975-01-01

    An air sampling system has been designed for installation on the Beechcraft King Air A-100 aircraft as a part of the Aerial Radiological Measuring System (ARMS). It is intended for both particle and whole gas sampling. The sampling probe is designed for isokinetic sampling and is mounted on a removable modified escape hatch cover, behind the co-pilot's seat, and extends about two feet forward of the hatch cover in the air stream lines. Directly behind the sampling probe inside the modified hatch cover is an expansion chamber, space for a 5-inch diameter filter paper cassette, and an optional four-stage cascade impactor for particle size distribution measurements. A pair of motors and blower pumps provide the necessary 0.5 atmosphere pressure across the type MSA 1106 B glass fiber filter paper to allow a flow rate of 50 cfm. The MSA 1106 B filter paper is designed to trap sub-micrometer particles with a high efficiency; it was chosen to enable a quantitative measurement of airborne radon daughters, one of the principal sources of background signals when radiological surveys are being performed. A venturi section and pressure gauges allow air flow rate measurements so that airborne contaminant concentrations may be quantified. A whole gas sampler capable of sampling a cubic meter of air is mounted inside the aircraft cabin. A nuclear counting system on board the aircraft provides capability for α, β and γ counting of filter paper samples. Design data are presented and types of survey missions which may be served by this system are described

  5. National Sample Survey of Registered Nurses

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Sample Survey of Registered Nurses (NSSRN) Download makes data from the survey readily available to users in a one-stop download. The Survey has been...

  6. THE FMOS-COSMOS SURVEY OF STAR-FORMING GALAXIES AT z ∼ 1.6. III. SURVEY DESIGN, PERFORMANCE, AND SAMPLE CHARACTERISTICS

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, J. D.; Sugiyama, N. [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo, Kashiwa, 277-8583 (Japan); Kashino, D. [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Nagoya, 464-8602 (Japan); Sanders, D.; Zahid, J.; Kewley, L. J.; Chu, J.; Hasinger, G. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI, 96822 (United States); Kartaltepe, J. S. [National Optical Astronomy Observatory, 950 N. Cherry Ave., Tucson, AZ, 85719 (United States); Arimoto, N. [Subaru Telescope, 650 North A’ohoku Place, Hilo, Hawaii, 96720 (United States); Renzini, A. [Instituto Nazionale de Astrofisica, Osservatorio Astronomico di Padova, vicolo dell’Osservatorio 5, I-35122, Padova, Italy, EU (Italy); Rodighiero, G.; Baronchelli, I. [Dipartimento di Fisica e Astronomia, Universita di Padova, vicolo Osservatorio, 3, I-35122, Padova (Italy); Daddi, E.; Juneau, S. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d’Astrophysique, CEA Saclay (France); Nagao, T. [Graduate School of Science and Engineering, Ehime University, 2-5 Bunkyo-cho, Matsuyama 790-8577 (Japan); Lilly, S. J.; Carollo, C. M. [Institute of Astronomy, ETH Zürich, CH-8093, Zürich (Switzerland); Capak, P. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Ilbert, O., E-mail: john.silverman@ipmu.jp [Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326, F-13388, Marseille (France); and others

    2015-09-15

    We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Hα emission line that falls within the H-band (1.6–1.8 μm) spectroscopic window from star-forming galaxies with 1.4 < z < 1.7 and M{sub stellar} ≳ 10{sup 10} M{sub ⊙}. With the high multiplex capability of FMOS, it is now feasible to construct samples of over 1000 galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R ∼ 2600) effectively separates Hα and [N ii]λ6585, thus enabling studies of the gas-phase metallicity and photoionization state of the interstellar medium. The primary aim of our program is to establish how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection places priority on those detected in the far-infrared by Herschel/PACS to assess the level of obscured star formation and investigate, in detail, outliers from the star formation rate (SFR)—stellar mass relation. Galaxies with Hα detections are followed up with FMOS observations at shorter wavelengths using the J-long (1.11–1.35 μm) grating to detect Hβ and [O iii]λ5008 which provides an assessment of the extinction required to measure SFRs not hampered by dust, and an indication of embedded active galactic nuclei. With 460 redshifts measured from 1153 spectra, we assess the performance of the instrument with respect to achieving our goals, discuss inherent biases in the sample, and detail the emission-line properties. Our higher-level data products, including catalogs and spectra, are available to the community.

  7. Mahalanobis' Contributions to Sample Surveys

    Indian Academy of Sciences (India)

    Sample Survey started its operations in October 1950 under the ... and adopted random cuts for estimating the acreage under jute ... demographic factors relating to indebtedness, unemployment, ... traffic surveys, demand for currency coins and average life of .... Mahalanobis derived the optimum allocation in stratified.

  8. Using Linked Survey Paradata to Improve Sampling Strategies in the Medical Expenditure Panel Survey

    Directory of Open Access Journals (Sweden)

    Mirel Lisa B.

    2017-06-01

    Full Text Available Using paradata from a prior survey that is linked to a new survey can help a survey organization develop more effective sampling strategies. One example of this type of linkage or subsampling is between the National Health Interview Survey (NHIS and the Medical Expenditure Panel Survey (MEPS. MEPS is a nationally representative sample of the U.S. civilian, noninstitutionalized population based on a complex multi-stage sample design. Each year a new sample is drawn as a subsample of households from the prior year’s NHIS. The main objective of this article is to examine how paradata from a prior survey can be used in developing a sampling scheme in a subsequent survey. A framework for optimal allocation of the sample in substrata formed for this purpose is presented and evaluated for the relative effectiveness of alternative substratification schemes. The framework is applied, using real MEPS data, to illustrate how utilizing paradata from the linked survey offers the possibility of making improvements to the sampling scheme for the subsequent survey. The improvements aim to reduce the data collection costs while maintaining or increasing effective responding sample sizes and response rates for a harder to reach population.

  9. The rise of survey sampling

    NARCIS (Netherlands)

    Bethlehem, J.

    2009-01-01

    This paper is about the history of survey sampling. It describes how sampling became an accepted scientific method. From the first ideas in 1895 it took some 50 years before the principles of probability sampling were widely accepted. This papers has a focus on developments in official statistics in

  10. Analyzing Repeated Measures Marginal Models on Sample Surveys with Resampling Methods

    Directory of Open Access Journals (Sweden)

    James D. Knoke

    2005-12-01

    Full Text Available Packaged statistical software for analyzing categorical, repeated measures marginal models on sample survey data with binary covariates does not appear to be available. Consequently, this report describes a customized SAS program which accomplishes such an analysis on survey data with jackknifed replicate weights for which the primary sampling unit information has been suppressed for respondent confidentiality. First, the program employs the Macro Language and the Output Delivery System (ODS to estimate the means and covariances of indicator variables for the response variables, taking the design into account. Then, it uses PROC CATMOD and ODS, ignoring the survey design, to obtain the design matrix and hypothesis test specifications. Finally, it enters these results into another run of CATMOD, which performs automated direct input of the survey design specifications and accomplishes the appropriate analysis. This customized SAS program can be employed, with minor editing, to analyze general categorical, repeated measures marginal models on sample surveys with replicate weights. Finally, the results of our analysis accounting for the survey design are compared to the results of two alternate analyses of the same data. This comparison confirms that such alternate analyses, which do not properly account for the design, do not produce useful results.

  11. Use of Lot quality assurance sampling surveys to evaluate community health worker performance in rural Zambia: a case of Luangwa district.

    Science.gov (United States)

    Mwanza, Moses; Zulu, Japhet; Topp, Stephanie M; Musonda, Patrick; Mutale, Wilbroad; Chilengi, Roma

    2017-04-17

    The Better Health Outcomes through Mentoring and Assessment (BHOMA) project is a cluster randomized controlled trial aimed at reducing age-standardized mortality rates in three rural districts through involvement of Community Health Workers (CHWs), Traditional Birth Attendants (TBAs), and Neighborhood Health Committees (NHCs). CHWs conduct quarterly surveys on all households using a questionnaire that captures key health events occurring within their catchment population. In order to validate contact with households, we utilize the Lot Quality Assurance Sampling (LQAS) methodology. In this study, we report experiences of applying the LQAS approach to monitor performance of CHWs in Luangwa District. Between April 2011 and December 2013, seven health facilities in Luangwa district were enrolled into the BHOMA project. The health facility catchment areas were divided into 33 geographic zones. Quality assurance was performed each quarter by randomly selecting zones representing about 90% of enrolled catchment areas from which 19 households per zone where also randomly identified. The surveys were conducted by CHW supervisors who had been trained on using the LQAS questionnaire. Information collected included household identity number (ID), whether the CHW visited the household, duration of the most recent visit, and what health information was discussed during the CHW visit. The threshold for success was set at 75% household outreach by CHWs in each zone. There are 4,616 total households in the 33 zones. This yielded a target of 32,212 household visits by community health workers during the 7 survey rounds. Based on the set cutoff point for passing the surveys (at least 75% households confirmed as visited), only one team of CHWs at Luangwa high school failed to reach the target during round 1 of the surveys; all the teams otherwise registered successful visits in all the surveys. We have employed the LQAS methodology for assurance that quarterly surveys were

  12. Statistical literacy and sample survey results

    Science.gov (United States)

    McAlevey, Lynn; Sullivan, Charles

    2010-10-01

    Sample surveys are widely used in the social sciences and business. The news media almost daily quote from them, yet they are widely misused. Using students with prior managerial experience embarking on an MBA course, we show that common sample survey results are misunderstood even by those managers who have previously done a statistics course. In general, they fare no better than managers who have never studied statistics. There are implications for teaching, especially in business schools, as well as for consulting.

  13. A two-phase sampling survey for nonresponse and its paradata to correct nonresponse bias in a health surveillance survey.

    Science.gov (United States)

    Santin, G; Bénézet, L; Geoffroy-Perez, B; Bouyer, J; Guéguen, A

    2017-02-01

    The decline in participation rates in surveys, including epidemiological surveillance surveys, has become a real concern since it may increase nonresponse bias. The aim of this study is to estimate the contribution of a complementary survey among a subsample of nonrespondents, and the additional contribution of paradata in correcting for nonresponse bias in an occupational health surveillance survey. In 2010, 10,000 workers were randomly selected and sent a postal questionnaire. Sociodemographic data were available for the whole sample. After data collection of the questionnaires, a complementary survey among a random subsample of 500 nonrespondents was performed using a questionnaire administered by an interviewer. Paradata were collected for the complete subsample of the complementary survey. Nonresponse bias in the initial sample and in the combined samples were assessed using variables from administrative databases available for the whole sample, not subject to differential measurement errors. Corrected prevalences by reweighting technique were estimated by first using the initial survey alone and then the initial and complementary surveys combined, under several assumptions regarding the missing data process. Results were compared by computing relative errors. The response rates of the initial and complementary surveys were 23.6% and 62.6%, respectively. For the initial and the combined surveys, the relative errors decreased after correction for nonresponse on sociodemographic variables. For the combined surveys without paradata, relative errors decreased compared with the initial survey. The contribution of the paradata was weak. When a complex descriptive survey has a low response rate, a short complementary survey among nonrespondents with a protocol which aims to maximize the response rates, is useful. The contribution of sociodemographic variables in correcting for nonresponse bias is important whereas the additional contribution of paradata in

  14. Sample design for the residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  15. The quality of sample surveys in a developing nation

    Directory of Open Access Journals (Sweden)

    Paul A Bourne

    2010-08-01

    Full Text Available Paul A Bourne1, Christopher AD Charles2,3, Neva South-Bourne4, Chloe Morris1, Denise Eldemire-Shearer1, Maureen D Kerr-Campbell51Department of Community Health and Psychiatry, Faculty of Medical Sciences, University of the West Indies, Mona, Kingston, Jamaica; 2King Graduate School, Monroe College, Bronx, New York, USA; 3Center for Victim Support, Harlem Hospital Center, New York, USA; 4Research assistant for Paul A Bourne; 5Systems Development Unit, Main Library, Faculty of Humanities and Education, University of the West Indies, Mona, Kingston, JamaicaBackground: In Jamaica, population census began in 1844, and many intercensal ratios obtained from the census data showed that there is a general high degree of accuracy of the data. However, statistics from the Jamaican Ministry of Health showed that there are inaccuracies in health data collected from males using sample surveys.Objectives: The objectives of the present research are to 1 investigate the accuracy of a national sample survey, 2 explore the feasibility and quality of using a subnational sample survey to represent a national survey, 3 aid other scholars in understanding the probability of using national sample surveys and subnational sample surveys, 4 assess older men’s ­evaluation of their health status, and 5 determine whether dichotomization changes self-evaluated health status.Methods: For the current study, the data used in the analysis were originally collected from 2 different sources: 1 the Jamaica Survey of Living Conditions (JSLC and 2 Survey of Older Men (SOM. Cross validation of self-evaluated data of men in Jamaica was done with comparable samples of the complete JSLC data and the SOM data, where men older than 55 years were selected from each sample.Results: In study 1, 50.2% of respondents indicated at least good self-evaluated health status compared with 74.0% in study 2. Statistical associations were found between health status and survey sample (Χ2 [df = 5

  16. Sample design considerations of indoor air exposure surveys

    International Nuclear Information System (INIS)

    Cox, B.G.; Mage, D.T.; Immerman, F.W.

    1988-01-01

    Concern about the potential for indoor air pollution has prompted recent surveys of radon and NO 2 concentrations in homes and personal exposure studies of volatile organics, carbon monoxide and pesticides, to name a few. The statistical problems in designing sample surveys that measure the physical environment are diverse and more complicated than those encountered in traditional surveys of human attitudes and attributes. This paper addresses issues encountered when designing indoor air quality (IAQ) studies. General statistical concepts related to target population definition, frame creation, and sample selection for area household surveys and telephone surveys are presented. The implications of different measurement approaches are discussed, and response rate considerations are described

  17. Sample size methods for estimating HIV incidence from cross-sectional surveys.

    Science.gov (United States)

    Konikoff, Jacob; Brookmeyer, Ron

    2015-12-01

    Understanding HIV incidence, the rate at which new infections occur in populations, is critical for tracking and surveillance of the epidemic. In this article, we derive methods for determining sample sizes for cross-sectional surveys to estimate incidence with sufficient precision. We further show how to specify sample sizes for two successive cross-sectional surveys to detect changes in incidence with adequate power. In these surveys biomarkers such as CD4 cell count, viral load, and recently developed serological assays are used to determine which individuals are in an early disease stage of infection. The total number of individuals in this stage, divided by the number of people who are uninfected, is used to approximate the incidence rate. Our methods account for uncertainty in the durations of time spent in the biomarker defined early disease stage. We find that failure to account for this uncertainty when designing surveys can lead to imprecise estimates of incidence and underpowered studies. We evaluated our sample size methods in simulations and found that they performed well in a variety of underlying epidemics. Code for implementing our methods in R is available with this article at the Biometrics website on Wiley Online Library. © 2015, The International Biometric Society.

  18. [Study of spatial stratified sampling strategy of Oncomelania hupensis snail survey based on plant abundance].

    Science.gov (United States)

    Xun-Ping, W; An, Z

    2017-07-27

    Objective To optimize and simplify the survey method of Oncomelania hupensis snails in marshland endemic regions of schistosomiasis, so as to improve the precision, efficiency and economy of the snail survey. Methods A snail sampling strategy (Spatial Sampling Scenario of Oncomelania based on Plant Abundance, SOPA) which took the plant abundance as auxiliary variable was explored and an experimental study in a 50 m×50 m plot in a marshland in the Poyang Lake region was performed. Firstly, the push broom surveyed data was stratified into 5 layers by the plant abundance data; then, the required numbers of optimal sampling points of each layer through Hammond McCullagh equation were calculated; thirdly, every sample point in the line with the Multiple Directional Interpolation (MDI) placement scheme was pinpointed; and finally, the comparison study among the outcomes of the spatial random sampling strategy, the traditional systematic sampling method, the spatial stratified sampling method, Sandwich spatial sampling and inference and SOPA was performed. Results The method (SOPA) proposed in this study had the minimal absolute error of 0.213 8; and the traditional systematic sampling method had the largest estimate, and the absolute error was 0.924 4. Conclusion The snail sampling strategy (SOPA) proposed in this study obtains the higher estimation accuracy than the other four methods.

  19. Sampling guidelines for oral fluid-based surveys of group-housed animals.

    Science.gov (United States)

    Rotolo, Marisa L; Sun, Yaxuan; Wang, Chong; Giménez-Lirola, Luis; Baum, David H; Gauger, Phillip C; Harmon, Karen M; Hoogland, Marlin; Main, Rodger; Zimmerman, Jeffrey J

    2017-09-01

    Formulas and software for calculating sample size for surveys based on individual animal samples are readily available. However, sample size formulas are not available for oral fluids and other aggregate samples that are increasingly used in production settings. Therefore, the objective of this study was to develop sampling guidelines for oral fluid-based porcine reproductive and respiratory syndrome virus (PRRSV) surveys in commercial swine farms. Oral fluid samples were collected in 9 weekly samplings from all pens in 3 barns on one production site beginning shortly after placement of weaned pigs. Samples (n=972) were tested by real-time reverse-transcription PCR (RT-rtPCR) and the binary results analyzed using a piecewise exponential survival model for interval-censored, time-to-event data with misclassification. Thereafter, simulation studies were used to study the barn-level probability of PRRSV detection as a function of sample size, sample allocation (simple random sampling vs fixed spatial sampling), assay diagnostic sensitivity and specificity, and pen-level prevalence. These studies provided estimates of the probability of detection by sample size and within-barn prevalence. Detection using fixed spatial sampling was as good as, or better than, simple random sampling. Sampling multiple barns on a site increased the probability of detection with the number of barns sampled. These results are relevant to PRRSV control or elimination projects at the herd, regional, or national levels, but the results are also broadly applicable to contagious pathogens of swine for which oral fluid tests of equivalent performance are available. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  20. Does self-selection affect samples' representativeness in online surveys? An investigation in online video game research.

    Science.gov (United States)

    Khazaal, Yasser; van Singer, Mathias; Chatton, Anne; Achab, Sophia; Zullino, Daniele; Rothen, Stephane; Khan, Riaz; Billieux, Joel; Thorens, Gabriel

    2014-07-07

    The number of medical studies performed through online surveys has increased dramatically in recent years. Despite their numerous advantages (eg, sample size, facilitated access to individuals presenting stigmatizing issues), selection bias may exist in online surveys. However, evidence on the representativeness of self-selected samples in online studies is patchy. Our objective was to explore the representativeness of a self-selected sample of online gamers using online players' virtual characters (avatars). All avatars belonged to individuals playing World of Warcraft (WoW), currently the most widely used online game. Avatars' characteristics were defined using various games' scores, reported on the WoW's official website, and two self-selected samples from previous studies were compared with a randomly selected sample of avatars. We used scores linked to 1240 avatars (762 from the self-selected samples and 478 from the random sample). The two self-selected samples of avatars had higher scores on most of the assessed variables (except for guild membership and exploration). Furthermore, some guilds were overrepresented in the self-selected samples. Our results suggest that more proficient players or players more involved in the game may be more likely to participate in online surveys. Caution is needed in the interpretation of studies based on online surveys that used a self-selection recruitment procedure. Epidemiological evidence on the reduced representativeness of sample of online surveys is warranted.

  1. Can Weighting Compensate for Sampling Issues in Internet Surveys?

    NARCIS (Netherlands)

    Vaske, J.J.; Jacobs, M.H.; Sijtsma, M.T.J.; Beaman, J.

    2011-01-01

    While Internet surveys have increased in popularity, results may not be representative of target populations. Weighting is commonly used to compensate for sampling issues. This article compared two surveys conducted in the Netherlands—a random mail survey (n = 353) and a convenience Internet survey

  2. Nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia.

    Science.gov (United States)

    Krleza, Jasna Lenicek

    2014-01-01

    Capillary sampling is increasingly used to obtain blood for laboratory tests in volumes as small as necessary and as non-invasively as possible. Whether capillary blood sampling is also frequent in Croatia, and whether it is performed according to international laboratory standards is unclear. All medical laboratories that participate in the Croatian National External Quality Assessment Program (N = 204) were surveyed on-line to collect information about the laboratory's parent institution, patient population, types and frequencies of laboratory tests based on capillary blood samples, choice of reference intervals, and policies and procedures specifically related to capillary sampling. Sampling practices were compared with guidelines from the Clinical and Laboratory Standards Institute (CLSI) and the World Health Organization (WHO). Of the 204 laboratories surveyed, 174 (85%) responded with complete questionnaires. Among the 174 respondents, 155 (89%) reported that they routinely perform capillary sampling, which is carried out by laboratory staff in 118 laboratories (76%). Nearly half of respondent laboratories (48%) do not have a written protocol including order of draw for multiple sampling. A single puncture site is used to provide capillary blood for up to two samples at 43% of laboratories that occasionally or regularly perform such sampling. Most respondents (88%) never perform arterialisation prior to capillary blood sampling. Capillary blood sampling is highly prevalent in Croatia across different types of clinical facilities and patient populations. Capillary sampling procedures are not standardised in the country, and the rate of laboratory compliance with CLSI and WHO guidelines is low.

  3. Sample Size Calculations for Population Size Estimation Studies Using Multiplier Methods With Respondent-Driven Sampling Surveys.

    Science.gov (United States)

    Fearon, Elizabeth; Chabata, Sungai T; Thompson, Jennifer A; Cowan, Frances M; Hargreaves, James R

    2017-09-14

    While guidance exists for obtaining population size estimates using multiplier methods with respondent-driven sampling surveys, we lack specific guidance for making sample size decisions. To guide the design of multiplier method population size estimation studies using respondent-driven sampling surveys to reduce the random error around the estimate obtained. The population size estimate is obtained by dividing the number of individuals receiving a service or the number of unique objects distributed (M) by the proportion of individuals in a representative survey who report receipt of the service or object (P). We have developed an approach to sample size calculation, interpreting methods to estimate the variance around estimates obtained using multiplier methods in conjunction with research into design effects and respondent-driven sampling. We describe an application to estimate the number of female sex workers in Harare, Zimbabwe. There is high variance in estimates. Random error around the size estimate reflects uncertainty from M and P, particularly when the estimate of P in the respondent-driven sampling survey is low. As expected, sample size requirements are higher when the design effect of the survey is assumed to be greater. We suggest a method for investigating the effects of sample size on the precision of a population size estimate obtained using multipler methods and respondent-driven sampling. Uncertainty in the size estimate is high, particularly when P is small, so balancing against other potential sources of bias, we advise researchers to consider longer service attendance reference periods and to distribute more unique objects, which is likely to result in a higher estimate of P in the respondent-driven sampling survey. ©Elizabeth Fearon, Sungai T Chabata, Jennifer A Thompson, Frances M Cowan, James R Hargreaves. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 14.09.2017.

  4. Sample survey methods as a quality assurance tool in a general practice immunisation audit.

    Science.gov (United States)

    Cullen, R

    1994-04-27

    In a multidoctor family practice there are often just too many sets of patients records to make it practical to repeat an audit by census of even an age band of the practice on a regular basis. This paper attempts to demonstrate how sample survey methodology can be incorporated into the quality assurance cycle. A simple random sample (with replacement) of 120 from 580 children with permanent records who were aged between 6 weeks and 2 years old from an Auckland general practice was performed, with sample size selected to give a predetermined precision. The survey was then repeated after 4 weeks. Both surveys were able to be completed within the course of a normal working day. An unexpectedly low level of under 2 years olds that were recorded as not overdue for any immunisations was found (22.5%) with only a modest improvement after a standard telephone/letter catch up campaign. Seventy-two percent of the sample held a group one community services card. The advantages of properly conducted sample surveys in producing useful estimates of known precision without disrupting office routines excessively were demonstrated. Through some attention to methodology, the trauma of a practice census can be avoided.

  5. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality

    Science.gov (United States)

    Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

    2018-01-01

    Introduction Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. Materials and methods The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. Results The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. Conclusions The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in

  6. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

    Science.gov (United States)

    L'Engle, Kelly; Sefa, Eunice; Adimazoya, Edward Akolgo; Yartey, Emmanuel; Lenzi, Rachel; Tarpo, Cindy; Heward-Mills, Nii Lante; Lew, Katherine; Ampeh, Yvonne

    2018-01-01

    Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample. The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census. The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample. The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit dialing of mobile

  7. Survey research with a random digit dial national mobile phone sample in Ghana: Methods and sample quality.

    Directory of Open Access Journals (Sweden)

    Kelly L'Engle

    Full Text Available Generating a nationally representative sample in low and middle income countries typically requires resource-intensive household level sampling with door-to-door data collection. High mobile phone penetration rates in developing countries provide new opportunities for alternative sampling and data collection methods, but there is limited information about response rates and sample biases in coverage and nonresponse using these methods. We utilized data from an interactive voice response, random-digit dial, national mobile phone survey in Ghana to calculate standardized response rates and assess representativeness of the obtained sample.The survey methodology was piloted in two rounds of data collection. The final survey included 18 demographic, media exposure, and health behavior questions. Call outcomes and response rates were calculated according to the American Association of Public Opinion Research guidelines. Sample characteristics, productivity, and costs per interview were calculated. Representativeness was assessed by comparing data to the Ghana Demographic and Health Survey and the National Population and Housing Census.The survey was fielded during a 27-day period in February-March 2017. There were 9,469 completed interviews and 3,547 partial interviews. Response, cooperation, refusal, and contact rates were 31%, 81%, 7%, and 39% respectively. Twenty-three calls were dialed to produce an eligible contact: nonresponse was substantial due to the automated calling system and dialing of many unassigned or non-working numbers. Younger, urban, better educated, and male respondents were overrepresented in the sample.The innovative mobile phone data collection methodology yielded a large sample in a relatively short period. Response rates were comparable to other surveys, although substantial coverage bias resulted from fewer women, rural, and older residents completing the mobile phone survey in comparison to household surveys. Random digit

  8. Nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia

    Science.gov (United States)

    Krleza, Jasna Lenicek

    2014-01-01

    Introduction: Capillary sampling is increasingly used to obtain blood for laboratory tests in volumes as small as necessary and as non-invasively as possible. Whether capillary blood sampling is also frequent in Croatia, and whether it is performed according to international laboratory standards is unclear. Materials and methods: All medical laboratories that participate in the Croatian National External Quality Assessment Program (N = 204) were surveyed on-line to collect information about the laboratory’s parent institution, patient population, types and frequencies of laboratory tests based on capillary blood samples, choice of reference intervals, and policies and procedures specifically related to capillary sampling. Sampling practices were compared with guidelines from the Clinical and Laboratory Standards Institute (CLSI) and the World Health Organization (WHO). Results: Of the 204 laboratories surveyed, 174 (85%) responded with complete questionnaires. Among the 174 respondents, 155 (89%) reported that they routinely perform capillary sampling, which is carried out by laboratory staff in 118 laboratories (76%). Nearly half of respondent laboratories (48%) do not have a written protocol including order of draw for multiple sampling. A single puncture site is used to provide capillary blood for up to two samples at 43% of laboratories that occasionally or regularly perform such sampling. Most respondents (88%) never perform arterialisation prior to capillary blood sampling. Conclusions: Capillary blood sampling is highly prevalent in Croatia across different types of clinical facilities and patient populations. Capillary sampling procedures are not standardised in the country, and the rate of laboratory compliance with CLSI and WHO guidelines is low. PMID:25351353

  9. Northern Marshall Islands radiological survey: sampling and analysis summary

    Energy Technology Data Exchange (ETDEWEB)

    Robison, W.L.; Conrado, C.L.; Eagle, R.J.; Stuart, M.L.

    1981-07-23

    A radiological survey was conducted in the Northern Marshall Islands to document reamining external gamma exposures from nuclear tests conducted at Enewetak and Bikini Atolls. An additional program was later included to obtain terrestrial and marine samples for radiological dose assessment for current or potential atoll inhabitants. This report is the first of a series summarizing the results from the terrestrial and marine surveys. The sample collection and processing procedures and the general survey methodology are discussed; a summary of the collected samples and radionuclide analyses is presented. Over 5400 samples were collected from the 12 atolls and 2 islands and prepared for analysis including 3093 soil, 961 vegetation, 153 animal, 965 fish composite samples (average of 30 fish per sample), 101 clam, 50 lagoon water, 15 cistern water, 17 groundwater, and 85 lagoon sediment samples. A complete breakdown by sample type, atoll, and island is given here. The total number of analyses by radionuclide are 8840 for /sup 241/Am, 6569 for /sup 137/Cs, 4535 for /sup 239 +240/Pu, 4431 for /sup 90/Sr, 1146 for /sup 238/Pu, 269 for /sup 241/Pu, and 114 each for /sup 239/Pu and /sup 240/Pu. A complete breakdown by sample category, atoll or island, and radionuclide is also included.

  10. Northern Marshall Islands radiological survey: sampling and analysis summary

    International Nuclear Information System (INIS)

    Robison, W.L.; Conrado, C.L.; Eagle, R.J.; Stuart, M.L.

    1981-01-01

    A radiological survey was conducted in the Northern Marshall Islands to document reamining external gamma exposures from nuclear tests conducted at Enewetak and Bikini Atolls. An additional program was later included to obtain terrestrial and marine samples for radiological dose assessment for current or potential atoll inhabitants. This report is the first of a series summarizing the results from the terrestrial and marine surveys. The sample collection and processing procedures and the general survey methodology are discussed; a summary of the collected samples and radionuclide analyses is presented. Over 5400 samples were collected from the 12 atolls and 2 islands and prepared for analysis including 3093 soil, 961 vegetation, 153 animal, 965 fish composite samples (average of 30 fish per sample), 101 clam, 50 lagoon water, 15 cistern water, 17 groundwater, and 85 lagoon sediment samples. A complete breakdown by sample type, atoll, and island is given here. The total number of analyses by radionuclide are 8840 for 241 Am, 6569 for 137 Cs, 4535 for 239+240 Pu, 4431 for 90 Sr, 1146 for 238 Pu, 269 for 241 Pu, and 114 each for 239 Pu and 240 Pu. A complete breakdown by sample category, atoll or island, and radionuclide is also included

  11. Non-response weighting adjustment approach in survey sampling ...

    African Journals Online (AJOL)

    Hence the discussion is illustrated with real examples from surveys (in particular 2003 KDHS) conducted by Central Bureau of Statistics (CBS) - Kenya. Some suggestions are made for improving the quality of non-response weighting. Keywords: Survey non-response; non-response adjustment factors; weighting; sampling ...

  12. A Survey of Archaeological Samples Dated in 1985

    DEFF Research Database (Denmark)

    Mejdahl, Vagn

    1986-01-01

    A survey is given of archaeological samples received for dating in 1985 at the Nordic Laboratory for Thermoluminescence Dating. A total of 66 samples were dated, 42 of which were burnt stones. All results were corrected for short-term fading as measured for samples stored at room temperature...

  13. Surveying immigrants without sampling frames - evaluating the success of alternative field methods.

    Science.gov (United States)

    Reichel, David; Morales, Laura

    2017-01-01

    This paper evaluates the sampling methods of an international survey, the Immigrant Citizens Survey, which aimed at surveying immigrants from outside the European Union (EU) in 15 cities in seven EU countries. In five countries, no sample frame was available for the target population. Consequently, alternative ways to obtain a representative sample had to be found. In three countries 'location sampling' was employed, while in two countries traditional methods were used with adaptations to reach the target population. The paper assesses the main methodological challenges of carrying out a survey among a group of immigrants for whom no sampling frame exists. The samples of the survey in these five countries are compared to results of official statistics in order to assess the accuracy of the samples obtained through the different sampling methods. It can be shown that alternative sampling methods can provide meaningful results in terms of core demographic characteristics although some estimates differ to some extent from the census results.

  14. A Survey of Archaeological Samples Dated in 1984

    DEFF Research Database (Denmark)

    Mejdahl, Vagn

    A survey is given of archaeological samples dated in 1984 at the Nordic Laboratory for Thermoluminescence Dating. A total of 79 samples were dated, 49 of which were burnt stones. All results were corrected for fading as measured for samples stored for four weeks at room temperature. The alpha dose...

  15. Hospital survey on patient safety culture: psychometric analysis on a Scottish sample.

    Science.gov (United States)

    Sarac, Cakil; Flin, Rhona; Mearns, Kathryn; Jackson, Jeanette

    2011-10-01

    To investigate the psychometric properties of the Hospital Survey on Patient Safety Culture on a Scottish NHS data set. The data were collected from 1969 clinical staff (estimated 22% response rate) from one acute hospital from each of seven Scottish Health boards. Using a split-half validation technique, the data were randomly split; an exploratory factor analysis was conducted on the calibration data set, and confirmatory factor analyses were conducted on the validation data set to investigate and check the original US model fit in a Scottish sample. Following the split-half validation technique, exploratory factor analysis results showed a 10-factor optimal measurement model. The confirmatory factor analyses were then performed to compare the model fit of two competing models (10-factor alternative model vs 12-factor original model). An S-B scaled χ(2) square difference test demonstrated that the original 12-factor model performed significantly better in a Scottish sample. Furthermore, reliability analyses of each component yielded satisfactory results. The mean scores on the climate dimensions in the Scottish sample were comparable with those found in other European countries. This study provided evidence that the original 12-factor structure of the Hospital Survey on Patient Safety Culture scale has been replicated in this Scottish sample. Therefore, no modifications are required to the original 12-factor model, which is suggested for use, since it would allow researchers the possibility of cross-national comparisons.

  16. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

    OpenAIRE

    Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

  17. Human-Robot Site Survey and Sampling for Space Exploration

    Science.gov (United States)

    Fong, Terrence; Bualat, Maria; Edwards, Laurence; Flueckiger, Lorenzo; Kunz, Clayton; Lee, Susan Y.; Park, Eric; To, Vinh; Utz, Hans; Ackner, Nir

    2006-01-01

    NASA is planning to send humans and robots back to the Moon before 2020. In order for extended missions to be productive, high quality maps of lunar terrain and resources are required. Although orbital images can provide much information, many features (local topography, resources, etc) will have to be characterized directly on the surface. To address this need, we are developing a system to perform site survey and sampling. The system includes multiple robots and humans operating in a variety of team configurations, coordinated via peer-to-peer human-robot interaction. In this paper, we present our system design and describe planned field tests.

  18. An assessment of Lot Quality Assurance Sampling to evaluate malaria outcome indicators: extending malaria indicator surveys.

    Science.gov (United States)

    Biedron, Caitlin; Pagano, Marcello; Hedt, Bethany L; Kilian, Albert; Ratcliffe, Amy; Mabunda, Samuel; Valadez, Joseph J

    2010-02-01

    Large investments and increased global prioritization of malaria prevention and treatment have resulted in greater emphasis on programme monitoring and evaluation (M&E) in many countries. Many countries currently use large multistage cluster sample surveys to monitor malaria outcome indicators on a regional and national level. However, these surveys often mask local-level variability important to programme management. Lot Quality Assurance Sampling (LQAS) has played a valuable role for local-level programme M&E. If incorporated into these larger surveys, it would provide a comprehensive M&E plan at little, if any, extra cost. The Mozambique Ministry of Health conducted a Malaria Indicator Survey (MIS) in June and July 2007. We applied LQAS classification rules to the 345 sampled enumeration areas to demonstrate identifying high- and low-performing areas with respect to two malaria program indicators-'household possession of any bednet' and 'household possession of any insecticide-treated bednet (ITN)'. As shown by the MIS, no province in Mozambique achieved the 70% coverage target for household possession of bednets or ITNs. By applying LQAS classification rules to the data, we identify 266 of the 345 enumeration areas as having bednet coverage severely below the 70% target. An additional 73 were identified with low ITN coverage. This article demonstrates the feasibility of integrating LQAS into multistage cluster sampling surveys and using these results to support a comprehensive national, regional and local programme M&E system. Furthermore, in the recommendations we outlined how to integrate the Large Country-LQAS design into macro-surveys while still obtaining results available through current sampling practices.

  19. Emigration Rates From Sample Surveys: An Application to Senegal.

    Science.gov (United States)

    Willekens, Frans; Zinn, Sabine; Leuchter, Matthias

    2017-12-01

    What is the emigration rate of a country, and how reliable is that figure? Answering these questions is not at all straightforward. Most data on international migration are census data on foreign-born population. These migrant stock data describe the immigrant population in destination countries but offer limited information on the rate at which people leave their country of origin. The emigration rate depends on the number leaving in a given period and the population at risk of leaving, weighted by the duration at risk. Emigration surveys provide a useful data source for estimating emigration rates, provided that the estimation method accounts for sample design. In this study, emigration rates and confidence intervals are estimated from a sample survey of households in the Dakar region in Senegal, which was part of the Migration between Africa and Europe survey. The sample was a stratified two-stage sample with oversampling of households with members abroad or return migrants. A combination of methods of survival analysis (time-to-event data) and replication variance estimation (bootstrapping) yields emigration rates and design-consistent confidence intervals that are representative for the study population.

  20. A Survey of Blue-Noise Sampling and Its Applications

    KAUST Repository

    Yan, Dongming; Guo, Jian-Wei; Wang, Bin; Zhang, Xiao-Peng; Wonka, Peter

    2015-01-01

    In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

  1. A Survey of Blue-Noise Sampling and Its Applications

    KAUST Repository

    Yan, Dongming

    2015-05-05

    In this paper, we survey recent approaches to blue-noise sampling and discuss their beneficial applications. We discuss the sampling algorithms that use points as sampling primitives and classify the sampling algorithms based on various aspects, e.g., the sampling domain and the type of algorithm. We demonstrate several well-known applications that can be improved by recent blue-noise sampling techniques, as well as some new applications such as dynamic sampling and blue-noise remeshing.

  2. A Study on the Representative Sampling Survey for Radionuclide Analysis of RI Waste

    Energy Technology Data Exchange (ETDEWEB)

    Jee, K. Y. [KAERI, Daejeon (Korea, Republic of); Kim, Juyoul; Jung, Gunhyo [FNC Tech. Co., Daejeon (Korea, Republic of)

    2007-07-15

    We developed a quantitative method for attaining a representative sample during sampling survey of RI waste. Considering a source, process, and type of RI waste, the method computes the number of sample, confidence interval, variance, and coefficient of variance. We also systematize the method of sampling survey logically and quantitatively. The result of this study can be applied to sampling survey of low- and intermediate-level waste generated from nuclear power plant during the transfer process to disposal facility.

  3. A survey of archaeological samples dated in 1984

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1985-10-01

    A survey is given of archaeological samples dated in 1984 at the Nordic Laboratory for Thermoluminescence Dating. A total of 79 samples were dated, 49 of which were burnt stones. All results were corrected for fading as measured for samples stored for four weeks at room temperature. The alpha dose contribution from uranium in the quartz and feldspar grains was included assuming an alpha efficiency facotr of 0.1 for quartz and 0.2 for feldspars. (author)

  4. Sampling and Analysis Plan for Supplemental Environmental Project: Aquatic Life Surveys

    Energy Technology Data Exchange (ETDEWEB)

    Berryhill, Jesse Tobias [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gaukler, Shannon Marie [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-26

    As part of a settlement agreement for nuclear waste incidents in 2014, several supplemental environment projects (SEPs) were initiated at Los Alamos National Laboratory (LANL or the Laboratory) between the U.S. Department of Energy and the state of New Mexico. One SEP from this agreement consists of performing aquatic life surveys and will be used to assess the applicability of using generic ambient water-quality criteria (AWQC) for aquatic life. AWQC are generic criteria developed by the U.S. Environmental Protection Agency (EPA) to cover a broad range of aquatic species and are not unique to a specific region or state. AWQC are established by a composition of toxicity data, called species sensitivity distributions (SSDs), and are determined by LC50 (lethal concentration of 50% of the organisms studied) acute toxicity experiments for chemicals of interest. It is of interest to determine whether aquatic species inhabiting waters on the Pajarito Plateau are adequately protected using the current generic AWQC. The focus of this study will determine which aquatic species are present in ephemeral, intermittent, and perennial waters within LANL boundaries and from reference waters adjacent to LANL. If the species identified from these waters do not generally represent species used in the SSDs, then SSDs may need to be modified and AWQC may need to be updated. This sampling and analysis plan details the sampling methodology, surveillance locations, temporal scheduling, and analytical approaches that will be used to complete aquatic life surveys. A significant portion of this sampling and analysis plan was formalized by referring to Appendix E: SEP Aquatic Life Surveys DQO (Data Quality Objectives).

  5. Sample Archaeological Survey of Public Use Areas, Milford Lake, Kansas

    Science.gov (United States)

    1982-09-01

    especially ceramics); Middle "" Mississippian, Middle Woodland and Central Plains archaeology ; the engineering and building technology of the Maya ...Sample Archaeological Survey of Public Use Areas -- 0C 0 awo (L" . .614 4.- -. 1?CNOV 1 40484 * , "n. O ji - 0" By Laura S. Schwiekhard Thn ’.iint haUs...RECIPIENT’S CATALOG NUMBER 4. TITLE (and Subtitle) 5. TYPE OF REPORT & PERIOD COVERED Milford Lake, Kansas Sample Archaeological Survey of Public Use

  6. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  7. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  8. A survey of archaeological samples dated in 1987

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1988-10-01

    A survey is given of archaeological samples dated in 1987 at the Nordic Laboratory for Thermoluminescence Dating. A total of 74 samples were dated. The results were corrected for short-term fading of feldspars as measured for samples stored at room temperature for four weeks or at 100 deg. C for two weeks. The beta dose from potassium and rubidium in feldspar, and the alpha dose from uranium and thorium in quartz and feldspar were included, assuming alpha efficiency factors of 0.1 for quartz and 0.2 for feldspar. (author) 20 tabs., 29 refs

  9. A survey of archaeological samples dated in 1985

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1986-11-01

    A survey is given of archaeological samples received for dating in 1985 at the Nordic Laboratory for Thermoluminescence Dating. A total of 66 samples were dated, 42 of which were burnt stones. All results were corrected for short- term fading as measured for samples stored at room temperature for four weeks. The beta dose from potassium and rubidium in feldspar and the alpha dose from uranium and thorium in quarts and feldspar were included assuming alpha efficiency factors of 0.1 for quartz and 0.2 for feldspar. (author)

  10. A survey of archaeological samples dated in 1986

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1987-10-01

    A survey is given of archaeological samples dated in 1986 at the Nordic Laboratory for Thermoluminescence Dating. A total of 56 samples were dated. The results were corrected for shortterm fading measured for samples stored for four weeks at room temperature or at 100 deg. C. The beta dose from potassium and rubidium in feldspar and the alpha dose from uranium and thorium in quartz and feldspar grain were included assuming alpha efficiency factors of 0.1 and 0.2 for quartz and feldspar, respectively. 21 refs. (author)

  11. Harmonizing Measures of Cognitive Performance Across International Surveys of Aging Using Item Response Theory.

    Science.gov (United States)

    Chan, Kitty S; Gross, Alden L; Pezzin, Liliana E; Brandt, Jason; Kasper, Judith D

    2015-12-01

    To harmonize measures of cognitive performance using item response theory (IRT) across two international aging studies. Data for persons ≥65 years from the Health and Retirement Study (HRS, N = 9,471) and the English Longitudinal Study of Aging (ELSA, N = 5,444). Cognitive performance measures varied (HRS fielded 25, ELSA 13); 9 were in common. Measurement precision was examined for IRT scores based on (a) common items, (b) common items adjusted for differential item functioning (DIF), and (c) DIF-adjusted all items. Three common items (day of date, immediate word recall, and delayed word recall) demonstrated DIF by survey. Adding survey-specific items improved precision but mainly for HRS respondents at lower cognitive levels. IRT offers a feasible strategy for harmonizing cognitive performance measures across other surveys and for other multi-item constructs of interest in studies of aging. Practical implications depend on sample distribution and the difficulty mix of in-common and survey-specific items. © The Author(s) 2015.

  12. Nationwide survey of policies and practices related to capillary blood sampling in medical laboratories in Croatia

    OpenAIRE

    Lenicek Krleza, Jasna

    2014-01-01

    Introduction: Capillary sampling is increasingly used to obtain blood for laboratory tests in volumes as small as necessary and as non-invasively as possible. Whether capillary blood sampling is also frequent in Croatia, and whether it is performed according to international laboratory standards is unclear. Materials and methods: All medical laboratories that participate in the Croatian National External Quality Assessment Program (N = 204) were surveyed on-line to collect information about t...

  13. A survey of archaeological samples dated in 1988

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1989-08-01

    A survey is given of archaeological samples dated in 1988 at the Nordic Laboratory for Thermoluminescence Dating. A total of 67 samples were dated. The results were corrected for short-term fading of feldspars as measured for samples stored at room temperature for four weeks or at 100 deg. C for two weeks. The beta dose from potassium and rubidium in feldspar, and the alpha dose from uranium and thorium in quartz and feldspar were included assuming alpha efficiency factors of 0.1 for quartz and 0.2 for feldspar. (author) 22 tabs., 1 ill., 14 refs

  14. National Sample Survey of Registered Nurses II. Status of Nurses: November 1980.

    Science.gov (United States)

    Bentley, Barbara S.; And Others

    This report provides data describing the nursing population as determined by the second national sample survey of registered nurses. A brief introduction is followed by a chapter that presents an overview of the survey methodology, including details on the sampling design, the response rate, and the statistical reliability. Chapter 3 provides a…

  15. Novel platform for ocean survey and autonomous sampling using multi-agent system

    OpenAIRE

    Taher, Tawfiq; Weymouth, G.D.; Varghese, Tony

    2013-01-01

    In-situ surveying and sampling of ocean environments provides critical data for laboratory work and oceanographic research. However, sampling a time-varying ocean field is often time and resource limited-meaning that samples often miss the features of interest. This paper presents a modular autonomous multi-agent robotic system which has been developed to accommodate a variety of research activities. This paper demonstrates the complementary capabilities of the agents by simultaneously survey...

  16. Pairing call-response surveys and distance sampling for a mammalian carnivore

    Science.gov (United States)

    Hansen, Sara J. K.; Frair, Jacqueline L.; Underwood, Harold B.; Gibbs, James P.

    2015-01-01

    Density estimates accounting for differential animal detectability are difficult to acquire for wide-ranging and elusive species such as mammalian carnivores. Pairing distance sampling with call-response surveys may provide an efficient means of tracking changes in populations of coyotes (Canis latrans), a species of particular interest in the eastern United States. Blind field trials in rural New York State indicated 119-m linear error for triangulated coyote calls, and a 1.8-km distance threshold for call detectability, which was sufficient to estimate a detection function with precision using distance sampling. We conducted statewide road-based surveys with sampling locations spaced ≥6 km apart from June to August 2010. Each detected call (be it a single or group) counted as a single object, representing 1 territorial pair, because of uncertainty in the number of vocalizing animals. From 524 survey points and 75 detections, we estimated the probability of detecting a calling coyote to be 0.17 ± 0.02 SE, yielding a detection-corrected index of 0.75 pairs/10 km2 (95% CI: 0.52–1.1, 18.5% CV) for a minimum of 8,133 pairs across rural New York State. Importantly, we consider this an index rather than true estimate of abundance given the unknown probability of coyote availability for detection during our surveys. Even so, pairing distance sampling with call-response surveys provided a novel, efficient, and noninvasive means of monitoring populations of wide-ranging and elusive, albeit reliably vocal, mammalian carnivores. Our approach offers an effective new means of tracking species like coyotes, one that is readily extendable to other species and geographic extents, provided key assumptions of distance sampling are met.

  17. Human performance in radiological survey scanning

    International Nuclear Information System (INIS)

    Brown, W.S.; Abelquist, E.W.

    1998-03-01

    The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor's performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors' performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments

  18. Human performance in radiological survey scanning

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Abelquist, E.W. [Oak Ridge Inst. for Science and Education, TN (United States)

    1998-03-01

    The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor`s performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors` performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments.

  19. Manual for the Portable Handheld Neutron Counter (PHNC) for Neutron Survey and the Measurement of Plutonium Samples

    International Nuclear Information System (INIS)

    Menlove, H.O.

    2005-01-01

    We have designed a portable neutron detector for passive neutron scanning measurement and coincidence counting of bulk samples of plutonium. The counter will be used for neutron survey applications as well as the measurement of plutonium samples for portable applications. The detector uses advanced design 3 He tubes to increase the efficiency and battery operated shift register electronics. This report describes the hardware, performance, and calibration for the system

  20. Impact of mental disorders on work performance in a community sample of workers in Japan: the World Mental Health Japan Survey 2002-2005.

    Science.gov (United States)

    Tsuchiya, Masao; Kawakami, Norito; Ono, Yutaka; Nakane, Yoshibumi; Nakamura, Yosikazu; Fukao, Akira; Tachimori, Hisateru; Iwata, Noboru; Uda, Hidenori; Nakane, Hideyuki; Watanabe, Makoto; Oorui, Masashi; Naganuma, Yoichi; Furukawa, Toshiaki A; Kobayashi, Masayo; Ahiko, Tadayuki; Takeshima, Tadashi; Kikkawa, Takehiko

    2012-06-30

    Most studies that investigate the impact of mental disorders on work performance have been conducted in Western countries, but this study examines the impact of common mental disorders on sick leave and on-the-job work performance in a community sample of Japanese workers. Data from the World Mental Health Japan survey were analyzed. A subsample of 530 workers aged 20-60years were interviewed using the WHO Composite International Diagnostic Interview 3.0. The WHO Health and Work Performance Questionnaire, was used to assess sick days and on-the-job work performance for the previous 30days. Linear regression was used to estimate the impact of mental disorders on these indicators of work performance over 12months. Mood disorders, including major depressive disorder, and alcohol abuse/dependence were significantly associated with decreased on-the-job performance. There were no significant associations between mental disorders and sick/absent days. Consistent with previous studies, major depression has a great impact on on-the-job work performance in Japan. The lost productivity was estimated at approximately 28-30 lost days per year. A similar decrease in on-the-job work performance was found for alcohol abuse/dependence, which is stronger than that in other countries, probably attributable to greater tolerance of problematic drinking at Japanese worksites. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

    Science.gov (United States)

    Lanata, C F; Black, R E

    1991-01-01

    Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

  2. On the problems of PPS sampling in multi-character surveys ...

    African Journals Online (AJOL)

    This paper, which is on the problems of PPS sampling in multi-character surveys, compares the efficiency of some estimators used in PPSWR sampling for multiple characteristics. From a superpopulation model, we computed the expected variances of the different estimators for each of the first two finite populations ...

  3. Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

    Energy Technology Data Exchange (ETDEWEB)

    Harlan, Susan R. [University of Utah School of Medicine, Department of Radiology, Salt Lake City, UT (United States); Nixon, G.W.; Prince, Jeffrey S. [Primary Children' s Medical Center, Department of Medical Imaging, Salt Lake City, UT (United States); Campbell, Kristine A.; Hansen, Karen [University of Utah School of Medicine, Department of Pediatrics, Salt Lake City, UT (United States)

    2009-09-15

    Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

  4. Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

    International Nuclear Information System (INIS)

    Harlan, Susan R.; Nixon, G.W.; Prince, Jeffrey S.; Campbell, Kristine A.; Hansen, Karen

    2009-01-01

    Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

  5. A Systematic Review of Published Respondent-Driven Sampling Surveys Collecting Behavioral and Biologic Data.

    Science.gov (United States)

    Johnston, Lisa G; Hakim, Avi J; Dittrich, Samantha; Burnett, Janet; Kim, Evelyn; White, Richard G

    2016-08-01

    Reporting key details of respondent-driven sampling (RDS) survey implementation and analysis is essential for assessing the quality of RDS surveys. RDS is both a recruitment and analytic method and, as such, it is important to adequately describe both aspects in publications. We extracted data from peer-reviewed literature published through September, 2013 that reported collected biological specimens using RDS. We identified 151 eligible peer-reviewed articles describing 222 surveys conducted in seven regions throughout the world. Most published surveys reported basic implementation information such as survey city, country, year, population sampled, interview method, and final sample size. However, many surveys did not report essential methodological and analytical information for assessing RDS survey quality, including number of recruitment sites, seeds at start and end, maximum number of waves, and whether data were adjusted for network size. Understanding the quality of data collection and analysis in RDS is useful for effectively planning public health service delivery and funding priorities.

  6. Optimum sample size to estimate mean parasite abundance in fish parasite surveys

    Directory of Open Access Journals (Sweden)

    Shvydka S.

    2018-03-01

    Full Text Available To reach ethically and scientifically valid mean abundance values in parasitological and epidemiological studies this paper considers analytic and simulation approaches for sample size determination. The sample size estimation was carried out by applying mathematical formula with predetermined precision level and parameter of the negative binomial distribution estimated from the empirical data. A simulation approach to optimum sample size determination aimed at the estimation of true value of the mean abundance and its confidence interval (CI was based on the Bag of Little Bootstraps (BLB. The abundance of two species of monogenean parasites Ligophorus cephali and L. mediterraneus from Mugil cephalus across the Azov-Black Seas localities were subjected to the analysis. The dispersion pattern of both helminth species could be characterized as a highly aggregated distribution with the variance being substantially larger than the mean abundance. The holistic approach applied here offers a wide range of appropriate methods in searching for the optimum sample size and the understanding about the expected precision level of the mean. Given the superior performance of the BLB relative to formulae with its few assumptions, the bootstrap procedure is the preferred method. Two important assessments were performed in the present study: i based on CIs width a reasonable precision level for the mean abundance in parasitological surveys of Ligophorus spp. could be chosen between 0.8 and 0.5 with 1.6 and 1x mean of the CIs width, and ii the sample size equal 80 or more host individuals allows accurate and precise estimation of mean abundance. Meanwhile for the host sample size in range between 25 and 40 individuals, the median estimates showed minimal bias but the sampling distribution skewed to the low values; a sample size of 10 host individuals yielded to unreliable estimates.

  7. Nonprobability Web Surveys to Measure Sexual Behaviors and Attitudes in the General Population: A Comparison With a Probability Sample Interview Survey

    Science.gov (United States)

    Burkill, Sarah; Couper, Mick P; Conrad, Frederick; Clifton, Soazig; Tanton, Clare; Phelps, Andrew; Datta, Jessica; Mercer, Catherine H; Sonnenberg, Pam; Prah, Philip; Mitchell, Kirstin R; Wellings, Kaye; Johnson, Anne M; Copas, Andrew J

    2014-01-01

    Background Nonprobability Web surveys using volunteer panels can provide a relatively cheap and quick alternative to traditional health and epidemiological surveys. However, concerns have been raised about their representativeness. Objective The aim was to compare results from different Web panels with a population-based probability sample survey (n=8969 aged 18-44 years) that used computer-assisted self-interview (CASI) for sensitive behaviors, the third British National Survey of Sexual Attitudes and Lifestyles (Natsal-3). Methods Natsal-3 questions were included on 4 nonprobability Web panel surveys (n=2000 to 2099), 2 using basic quotas based on age and sex, and 2 using modified quotas based on additional variables related to key estimates. Results for sociodemographic characteristics were compared with external benchmarks and for sexual behaviors and opinions with Natsal-3. Odds ratios (ORs) were used to express differences between the benchmark data and each survey for each variable of interest. A summary measure of survey performance was the average absolute OR across variables. Another summary measure was the number of key estimates for which the survey differed significantly (at the 5% level) from the benchmarks. Results For sociodemographic variables, the Web surveys were less representative of the general population than Natsal-3. For example, for men, the average absolute OR for Natsal-3 was 1.14, whereas for the Web surveys the average absolute ORs ranged from 1.86 to 2.30. For all Web surveys, approximately two-thirds of the key estimates of sexual behaviors were different from Natsal-3 and the average absolute ORs ranged from 1.32 to 1.98. Differences were appreciable even for questions asked by CASI in Natsal-3. No single Web survey performed consistently better than any other did. Modified quotas slightly improved results for men, but not for women. Conclusions Consistent with studies from other countries on less sensitive topics, volunteer Web

  8. Semi-automatic surface sediment sampling system - A prototype to be implemented in bivalve fishing surveys

    Science.gov (United States)

    Rufino, Marta M.; Baptista, Paulo; Pereira, Fábio; Gaspar, Miguel B.

    2018-01-01

    In the current work we propose a new method to sample surface sediment during bivalve fishing surveys. Fishing institutes all around the word carry out regular surveys with the aim of monitoring the stocks of commercial species. These surveys comprise often more than one hundred of sampling stations and cover large geographical areas. Although superficial sediment grain sizes are among the main drivers of benthic communities and provide crucial information for studies on coastal dynamics, overall there is a strong lack of this type of data, possibly, because traditional surface sediment sampling methods use grabs, that require considerable time and effort to be carried out on regular basis or on large areas. In face of these aspects, we developed an easy and un-expensive method to sample superficial sediments, during bivalve fisheries monitoring surveys, without increasing survey time or human resources. The method was successfully evaluated and validated during a typical bivalve survey carried out on the Northwest coast of Portugal, confirming that it had any interference with the survey objectives. Furthermore, the method was validated by collecting samples using a traditional Van Veen grabs (traditional method), which showed a similar grain size composition to the ones collected by the new method, on the same localities. We recommend that the procedure is implemented on regular bivalve fishing surveys, together with an image analysis system to analyse the collected samples. The new method will provide substantial quantity of data on surface sediment in coastal areas, using a non-expensive and efficient manner, with a high potential application in different fields of research.

  9. Methodology for performing surveys for fixed contamination

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1994-10-01

    This report describes a methodology for performing instrument surveys for fixed contamination that can be used to support the release of material from radiological areas, including release to controlled areas and release from radiological control. The methodology, which is based on a fast scan survey and a series of statistical, fixed measurements, meets the requirements of the U.S. Department of Energy Radiological Control Manual (RadCon Manual) (DOE 1994) and DOE Order 5400.5 (DOE 1990) for surveys for fixed contamination and requires less time than a conventional scan survey. The confidence interval associated with the new methodology conforms to the draft national standard for surveys. The methodology that is presented applies only to surveys for fixed contamination. Surveys for removable contamination are not discussed, and the new methodology does not affect surveys for removable contamination

  10. Samples and data accessibility in research biobanks: an explorative survey

    Directory of Open Access Journals (Sweden)

    Marco Capocasa

    2016-02-01

    Full Text Available Biobanks, which contain human biological samples and/or data, provide a crucial contribution to the progress of biomedical research. However, the effective and efficient use of biobank resources depends on their accessibility. In fact, making bio-resources promptly accessible to everybody may increase the benefits for society. Furthermore, optimizing their use and ensuring their quality will promote scientific creativity and, in general, contribute to the progress of bio-medical research. Although this has become a rather common belief, several laboratories are still secretive and continue to withhold samples and data. In this study, we conducted a questionnaire-based survey in order to investigate sample and data accessibility in research biobanks operating all over the world. The survey involved a total of 46 biobanks. Most of them gave permission to access their samples (95.7% and data (85.4%, but free and unconditioned accessibility seemed not to be common practice. The analysis of the guidelines regarding the accessibility to resources of the biobanks that responded to the survey highlights three issues: (i the request for applicants to explain what they would like to do with the resources requested; (ii the role of funding, public or private, in the establishment of fruitful collaborations between biobanks and research labs; (iii the request of co-authorship in order to give access to their data. These results suggest that economic and academic aspects are involved in determining the extent of sample and data sharing stored in biobanks. As a second step of this study, we investigated the reasons behind the high diversity of requirements to access biobank resources. The analysis of informative answers suggested that the different modalities of resource accessibility seem to be largely influenced by both social context and legislation of the countries where the biobanks operate.

  11. Modern survey sampling

    CERN Document Server

    Chaudhuri, Arijit

    2014-01-01

    Exposure to SamplingAbstract Introduction Concepts of Population, Sample, and SamplingInitial RamificationsAbstract Introduction Sampling Design, Sampling SchemeRandom Numbers and Their Uses in Simple RandomSampling (SRS)Drawing Simple Random Samples with and withoutReplacementEstimation of Mean, Total, Ratio of Totals/Means:Variance and Variance EstimationDetermination of Sample SizesA.2 Appendix to Chapter 2 A.More on Equal Probability Sampling A.Horvitz-Thompson EstimatorA.SufficiencyA.LikelihoodA.Non-Existence Theorem More Intricacies Abstract Introduction Unequal Probability Sampling StrategiesPPS Sampling Exploring Improved WaysAbstract Introduction Stratified Sampling Cluster SamplingMulti-Stage SamplingMulti-Phase Sampling: Ratio and RegressionEstimationviiviii ContentsControlled SamplingModeling Introduction Super-Population ModelingPrediction Approach Model-Assisted Approach Bayesian Methods Spatial SmoothingSampling on Successive Occasions: Panel Rotation Non-Response and Not-at-Homes Weighting Adj...

  12. Evaluating the quality of sampling frames used in European cross-national surveys

    NARCIS (Netherlands)

    Maineri, A.M.; Scherpenzeel, A.; Bristle, Johanna; Pflüger, Senta-Melissa; Butt, Sarah; Zins, Stefan; Emery, Tom; Luijkx, R.

    This report addresses the quality of the population registers which are currently being used as sampling frames in countries participating in the four cross-European surveys cooperating in SERISS: the European Social Survey (ESS), the European Values Study (EVS), the Gender and Generations Program

  13. [Comparison study on sampling methods of Oncomelania hupensis snail survey in marshland schistosomiasis epidemic areas in China].

    Science.gov (United States)

    An, Zhao; Wen-Xin, Zhang; Zhong, Yao; Yu-Kuan, Ma; Qing, Liu; Hou-Lang, Duan; Yi-di, Shang

    2016-06-29

    To optimize and simplify the survey method of Oncomelania hupensis snail in marshland endemic region of schistosomiasis and increase the precision, efficiency and economy of the snail survey. A quadrate experimental field was selected as the subject of 50 m×50 m size in Chayegang marshland near Henghu farm in the Poyang Lake region and a whole-covered method was adopted to survey the snails. The simple random sampling, systematic sampling and stratified random sampling methods were applied to calculate the minimum sample size, relative sampling error and absolute sampling error. The minimum sample sizes of the simple random sampling, systematic sampling and stratified random sampling methods were 300, 300 and 225, respectively. The relative sampling errors of three methods were all less than 15%. The absolute sampling errors were 0.221 7, 0.302 4 and 0.047 8, respectively. The spatial stratified sampling with altitude as the stratum variable is an efficient approach of lower cost and higher precision for the snail survey.

  14. Sampling strategy for a large scale indoor radiation survey - a pilot project

    International Nuclear Information System (INIS)

    Strand, T.; Stranden, E.

    1986-01-01

    Optimisation of a stratified random sampling strategy for large scale indoor radiation surveys is discussed. It is based on the results from a small scale pilot project where variances in dose rates within different categories of houses were assessed. By selecting a predetermined precision level for the mean dose rate in a given region, the number of measurements needed can be optimised. The results of a pilot project in Norway are presented together with the development of the final sampling strategy for a planned large scale survey. (author)

  15. A sample of galaxy pairs identified from the LAMOST spectral survey and the Sloan Digital Sky Survey

    International Nuclear Information System (INIS)

    Shen, Shi-Yin; Argudo-Fernández, Maria; Chen, Li; Feng, Shuai; Hou, Jin-Liang; Shao, Zheng-Yi; Chen, Xiao-Yan; Luo, A-Li; Wu, Hong; Yang, Hai-Feng; Yang, Ming; Hou, Yong-Hui; Wang, Yue-Fei; Jiang, Peng; Wang, Ting-Gui; Jing, Yi-Peng; Kong, Xu; Wang, Wen-Ting; Luo, Zhi-Jian; Wu, Xue-Bing

    2016-01-01

    A small fraction (< 10%) of the SDSS main galaxy (MG) sample has not been targeted with spectroscopy due to the effect of fiber collisions. These galaxies have been compiled into the input catalog of the LAMOST ExtraGAlactic Surveys and named the complementary galaxy sample. In this paper, we introduce this project and status of the spectroscopies associated with the complementary galaxies in the first two years of the LAMOST spectral survey (till Sep. of 2014). Moreover, we present a sample of 1102 galaxy pairs identified from the LAMOST complementary galaxies and SDSS MGs, which are defined as two members that have a projected distance smaller than 100 h −1 70 kpc and a recessional velocity difference smaller than 500 km s −1 . Compared with galaxy pairs that are only selected from SDSS, the LAMOST-SDSS pairs have the advantages of not being biased toward large separations and therefore act as a useful supplement in statistical studies of galaxy interaction and galaxy merging. (paper)

  16. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali.

    Science.gov (United States)

    Minetti, Andrea; Riera-Montes, Margarita; Nackers, Fabienne; Roederer, Thomas; Koudika, Marie Hortense; Sekkenes, Johanne; Taconet, Aurore; Fermon, Florence; Touré, Albouhary; Grais, Rebecca F; Checchi, Francesco

    2012-10-12

    Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS) approach has been proposed as an alternative, as smaller sample sizes are required. We explored (i) the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii) the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i) health areas not requiring supplemental activities; ii) health areas requiring additional vaccination; iii) health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3), standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Small sample cluster surveys (10 × 15) are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  17. AngularJS Performance: A Survey Study

    OpenAIRE

    Ramos, Miguel; Valente, Marco Tulio; Terra, Ricardo

    2017-01-01

    AngularJS is a popular JavaScript MVC-based framework to construct single-page web applications. In this paper, we report the results of a survey with 95 professional developers about performance issues of AngularJS applications. We report common practices followed by developers to avoid performance problems (e.g., use of third-party or custom components), the general causes of performance problems in AngularJS applications (e.g., inadequate architecture decisions taken by AngularJS users), a...

  18. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-07-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  19. The U.S. Geological Survey Geologic Collections Management System (GCMS)—A master catalog and collections management plan for U.S. Geological Survey geologic samples and sample collections

    Science.gov (United States)

    ,

    2015-01-01

    The U.S. Geological Survey (USGS) is widely recognized in the earth science community as possessing extensive collections of earth materials collected by research personnel over the course of its history. In 2006, a Geologic Collections Inventory was conducted within the USGS Geology Discipline to determine the extent and nature of its sample collections, and in 2008, a working group was convened by the USGS National Geologic and Geophysical Data Preservation Program to examine ways in which these collections could be coordinated, cataloged, and made available to researchers both inside and outside the USGS. The charge to this working group was to evaluate the proposition of creating a Geologic Collections Management System (GCMS), a centralized database that would (1) identify all existing USGS geologic collections, regardless of size, (2) create a virtual link among the collections, and (3) provide a way for scientists and other researchers to obtain access to the samples and data in which they are interested. Additionally, the group was instructed to develop criteria for evaluating current collections and to establish an operating plan and set of standard practices for handling, identifying, and managing future sample collections. Policies and procedures promoted by the GCMS would be based on extant best practices established by the National Science Foundation and the Smithsonian Institution. The resulting report—USGS Circular 1410, “The U.S. Geological Survey Geologic Collections Management System (GCMS): A Master Catalog and Collections Management Plan for U.S. Geological Survey Geologic Samples and Sample Collections”—has been developed for sample repositories to be a guide to establishing common practices in the collection, retention, and disposal of geologic research materials throughout the USGS.

  20. 36 CFR 9.42 - Well records and reports, plots and maps, samples, tests and surveys.

    Science.gov (United States)

    2010-07-01

    ... Well records and reports, plots and maps, samples, tests and surveys. Any technical data gathered... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Well records and reports, plots and maps, samples, tests and surveys. 9.42 Section 9.42 Parks, Forests, and Public Property...

  1. Dealing with trade-offs in destructive sampling designs for occupancy surveys.

    Directory of Open Access Journals (Sweden)

    Stefano Canessa

    Full Text Available Occupancy surveys should be designed to minimise false absences. This is commonly achieved by increasing replication or increasing the efficiency of surveys. In the case of destructive sampling designs, in which searches of individual microhabitats represent the repeat surveys, minimising false absences leads to an inherent trade-off. Surveyors can sample more low quality microhabitats, bearing the resultant financial costs and producing wider-spread impacts, or they can target high quality microhabitats were the focal species is more likely to be found and risk more severe impacts on local habitat quality. We show how this trade-off can be solved with a decision-theoretic approach, using the Millewa Skink Hemiergis millewae from southern Australia as a case study. Hemiergis millewae is an endangered reptile that is best detected using destructive sampling of grass hummocks. Within sites that were known to be occupied by H. millewae, logistic regression modelling revealed that lizards were more frequently detected in large hummocks. If this model is an accurate representation of the detection process, searching large hummocks is more efficient and requires less replication, but this strategy also entails destruction of the best microhabitats for the species. We developed an optimisation tool to calculate the minimum combination of the number and size of hummocks to search to achieve a given cumulative probability of detecting the species at a site, incorporating weights to reflect the sensitivity of the results to a surveyor's priorities. The optimisation showed that placing high weight on minimising volume necessitates impractical replication, whereas placing high weight on minimising replication requires searching very large hummocks which are less common and may be vital for H. millewae. While destructive sampling methods are sometimes necessary, surveyors must be conscious of the ecological impacts of these methods. This study provides a

  2. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali

    Directory of Open Access Journals (Sweden)

    Minetti Andrea

    2012-10-01

    Full Text Available Abstract Background Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS approach has been proposed as an alternative, as smaller sample sizes are required. Methods We explored (i the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. Results VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i health areas not requiring supplemental activities; ii health areas requiring additional vaccination; iii health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3, standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Conclusions Small sample cluster surveys (10 × 15 are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  3. Sample size reduction in groundwater surveys via sparse data assimilation

    KAUST Repository

    Hussain, Z.; Muhammad, A.

    2013-01-01

    In this paper, we focus on sparse signal recovery methods for data assimilation in groundwater models. The objective of this work is to exploit the commonly understood spatial sparsity in hydrodynamic models and thereby reduce the number of measurements to image a dynamic groundwater profile. To achieve this we employ a Bayesian compressive sensing framework that lets us adaptively select the next measurement to reduce the estimation error. An extension to the Bayesian compressive sensing framework is also proposed which incorporates the additional model information to estimate system states from even lesser measurements. Instead of using cumulative imaging-like measurements, such as those used in standard compressive sensing, we use sparse binary matrices. This choice of measurements can be interpreted as randomly sampling only a small subset of dug wells at each time step, instead of sampling the entire grid. Therefore, this framework offers groundwater surveyors a significant reduction in surveying effort without compromising the quality of the survey. © 2013 IEEE.

  4. Sample size reduction in groundwater surveys via sparse data assimilation

    KAUST Repository

    Hussain, Z.

    2013-04-01

    In this paper, we focus on sparse signal recovery methods for data assimilation in groundwater models. The objective of this work is to exploit the commonly understood spatial sparsity in hydrodynamic models and thereby reduce the number of measurements to image a dynamic groundwater profile. To achieve this we employ a Bayesian compressive sensing framework that lets us adaptively select the next measurement to reduce the estimation error. An extension to the Bayesian compressive sensing framework is also proposed which incorporates the additional model information to estimate system states from even lesser measurements. Instead of using cumulative imaging-like measurements, such as those used in standard compressive sensing, we use sparse binary matrices. This choice of measurements can be interpreted as randomly sampling only a small subset of dug wells at each time step, instead of sampling the entire grid. Therefore, this framework offers groundwater surveyors a significant reduction in surveying effort without compromising the quality of the survey. © 2013 IEEE.

  5. Research Note Pilot survey to assess sample size for herbaceous ...

    African Journals Online (AJOL)

    A pilot survey to determine sub-sample size (number of point observations per plot) for herbaceous species composition assessments, using a wheel-point apparatus applying the nearest-plant method, was conducted. Three plots differing in species composition on the Zululand coastal plain were selected, and on each plot ...

  6. Satellite-aided survey sampling and implementation in low- and middle-income contexts: a low-cost/low-tech alternative.

    Science.gov (United States)

    Haenssgen, Marco J

    2015-01-01

    The increasing availability of online maps, satellite imagery, and digital technology can ease common constraints of survey sampling in low- and middle-income countries. However, existing approaches require specialised software and user skills, professional GPS equipment, and/or commercial data sources; they tend to neglect spatial sampling considerations when using satellite maps; and they continue to face implementation challenges analogous to conventional survey implementation methods. This paper presents an alternative way of utilising satellite maps and digital aides that aims to address these challenges. The case studies of two rural household surveys in Rajasthan (India) and Gansu (China) compare conventional survey sampling and implementation techniques with the use of online map services such as Google, Bing, and HERE maps. Modern yet basic digital technology can be integrated into the processes of preparing, implementing, and monitoring a rural household survey. Satellite-aided systematic random sampling enhanced the spatial representativeness of the village samples and entailed savings of approximately £4000 compared to conventional household listing, while reducing the duration of the main survey by at least 25 %. This low-cost/low-tech satellite-aided survey sampling approach can be useful for student researchers and resource-constrained research projects operating in low- and middle-income contexts with high survey implementation costs. While achieving transparent and efficient survey implementation at low costs, researchers aiming to adopt a similar process should be aware of the locational, technical, and logistical requirements as well as the methodological challenges of this strategy.

  7. Sampling effects on the identification of roadkill hotspots: Implications for survey design.

    Science.gov (United States)

    Santos, Sara M; Marques, J Tiago; Lourenço, André; Medinas, Denis; Barbosa, A Márcia; Beja, Pedro; Mira, António

    2015-10-01

    Although locating wildlife roadkill hotspots is essential to mitigate road impacts, the influence of study design on hotspot identification remains uncertain. We evaluated how sampling frequency affects the accuracy of hotspot identification, using a dataset of vertebrate roadkills (n = 4427) recorded over a year of daily surveys along 37 km of roads. "True" hotspots were identified using this baseline dataset, as the 500-m segments where the number of road-killed vertebrates exceeded the upper 95% confidence limit of the mean, assuming a Poisson distribution of road-kills per segment. "Estimated" hotspots were identified likewise, using datasets representing progressively lower sampling frequencies, which were produced by extracting data from the baseline dataset at appropriate time intervals (1-30 days). Overall, 24.3% of segments were "true" hotspots, concentrating 40.4% of roadkills. For different groups, "true" hotspots accounted from 6.8% (bats) to 29.7% (small birds) of road segments, concentrating from 60% (lizards, lagomorphs, carnivores) of roadkills. Spatial congruence between "true" and "estimated" hotspots declined rapidly with increasing time interval between surveys, due primarily to increasing false negatives (i.e., missing "true" hotspots). There were also false positives (i.e., wrong "estimated" hotspots), particularly at low sampling frequencies. Spatial accuracy decay with increasing time interval between surveys was higher for smaller-bodied (amphibians, reptiles, small birds, small mammals) than for larger-bodied species (birds of prey, hedgehogs, lagomorphs, carnivores). Results suggest that widely used surveys at weekly or longer intervals may produce poor estimates of roadkill hotspots, particularly for small-bodied species. Surveying daily or at two-day intervals may be required to achieve high accuracy in hotspot identification for multiple species. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Performance samples on academic tasks : improving prediction of academic performance

    NARCIS (Netherlands)

    Tanilon, Jenny

    2011-01-01

    This thesis is about the development and validation of a performance-based test, labeled as Performance Samples on academic tasks in Education and Child Studies (PSEd). PSEd is designed to identify students who are most able to perform the academic tasks involved in an Education and Child Studies

  9. A survey on exploring key performance indicators

    Directory of Open Access Journals (Sweden)

    Mohammed Badawy

    2016-12-01

    Full Text Available Key Performance Indicators (KPIs allows gathering knowledge and exploring the best way to achieve organization goals. Many researchers have provided different ideas for determining KPI's either manually, and semi-automatic, or automatic which is applied in different fields. This work concentrates on providing a survey of different approaches for exploring and predicting key performance indicators (KPIs.

  10. Conducting a respondent-driven sampling survey with the use of existing resources in Sydney, Australia.

    Science.gov (United States)

    Paquette, Dana M; Bryant, Joanne; Crawford, Sione; de Wit, John B F

    2011-07-01

    Respondent-driven sampling (RDS) is a form of chain-referral sampling that is increasingly being used for HIV behavioural surveillance. When used for surveillance purposes, a sampling method should be relatively inexpensive and simple to operate. This study examined whether an RDS survey of people who inject drugs (PWID) in Sydney, Australia, could be successfully conducted through the use of minimal and existing resources. The RDS survey was conducted on the premises of a local needle and syringe program (NSP) with some adjustments to take into account the constraints of existing resources. The impact of the survey on clients and on staff was examined by summarizing NSP service data and by conducting post-survey discussions with NSP staff. From November 2009 till March 2010, 261 participants were recruited in 16 waves. A significant increase was found in the number of services provided by the NSP during and after data collection. Generally, staff felt that the survey had a positive impact by exposing a broader group of people to the NSP. However, conducting the survey may have led to privacy issues for NSP clients due to an increased number of people gathering around the NSP. This study shows that RDS can be conducted with the use of minimal and existing resources under certain conditions (e.g., use of a self-administered questionnaire and no biological samples taken). A more detailed cost-utility analysis is needed to determine whether RDS' advantages outweigh potential challenges when compared to simpler and less costly convenience methods. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  11. Robust H2 performance for sampled-data systems

    DEFF Research Database (Denmark)

    Rank, Mike Lind

    1997-01-01

    Robust H2 performance conditions under structured uncertainty, analogous to well known methods for H∞ performance, have recently emerged in both discrete and continuous-time. This paper considers the extension into uncertain sampled-data systems, taking into account inter-sample behavior. Convex...... conditions for robust H2 performance are derived for different uncertainty sets...

  12. African Primary Care Research: Performing surveys using questionnaires

    OpenAIRE

    Govender, Indiran; Mabuza, Langalibalele H.; Ogunbanjo, Gboyega A.; Mash, Bob

    2014-01-01

    The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on pri...

  13. Simulating the Performance of Ground-Based Optical Asteroid Surveys

    Science.gov (United States)

    Christensen, Eric J.; Shelly, Frank C.; Gibbs, Alex R.; Grauer, Albert D.; Hill, Richard E.; Johnson, Jess A.; Kowalski, Richard A.; Larson, Stephen M.

    2014-11-01

    We are developing a set of asteroid survey simulation tools in order to estimate the capability of existing and planned ground-based optical surveys, and to test a variety of possible survey cadences and strategies. The survey simulator is composed of several layers, including a model population of solar system objects and an orbital integrator, a site-specific atmospheric model (including inputs for seeing, haze and seasonal cloud cover), a model telescope (with a complete optical path to estimate throughput), a model camera (including FOV, pixel scale, and focal plane fill factor) and model source extraction and moving object detection layers with tunable detection requirements. We have also developed a flexible survey cadence planning tool to automatically generate nightly survey plans. Inputs to the cadence planner include camera properties (FOV, readout time), telescope limits (horizon, declination, hour angle, lunar and zenithal avoidance), preferred and restricted survey regions in RA/Dec, ecliptic, and Galactic coordinate systems, and recent coverage by other asteroid surveys. Simulated surveys are created for a subset of current and previous NEO surveys (LINEAR, Pan-STARRS and the three Catalina Sky Survey telescopes), and compared against the actual performance of these surveys in order to validate the model’s performance. The simulator tracks objects within the FOV of any pointing that were not discovered (e.g. too few observations, too trailed, focal plane array gaps, too fast or slow), thus dividing the population into “discoverable” and “discovered” subsets, to inform possible survey design changes. Ongoing and future work includes generating a realistic “known” subset of the model NEO population, running multiple independent simulated surveys in coordinated and uncoordinated modes, and testing various cadences to find optimal strategies for detecting NEO sub-populations. These tools can also assist in quantifying the efficiency of novel

  14. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. Methods We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. Results MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%–95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. Conclusions National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. PMID:26965869

  15. French people and renewable energies. Results of the survey performed by IPSOS for the SER - January 2013

    International Nuclear Information System (INIS)

    2013-01-01

    This Power Point document presents, under the form of tables, graphs and figures, the results of a survey performed in December 2012 on a representative sample of 1012 persons over 18 year old. This survey addressed the energy issue within the public debate and action (knowledge of the issue and debate on energy transition, opinion on the importance of the issue of energy in the government's action), the perception of the various renewable energies, the development of renewable energies, and the knowledge and use of the different renewable energies

  16. Statistical searches for microlensing events in large, non-uniformly sampled time-domain surveys: A test using palomar transient factory data

    Energy Technology Data Exchange (ETDEWEB)

    Price-Whelan, Adrian M.; Agüeros, Marcel A. [Department of Astronomy, Columbia University, 550 W 120th Street, New York, NY 10027 (United States); Fournier, Amanda P. [Department of Physics, Broida Hall, University of California, Santa Barbara, CA 93106 (United States); Street, Rachel [Las Cumbres Observatory Global Telescope Network, Inc., 6740 Cortona Drive, Suite 102, Santa Barbara, CA 93117 (United States); Ofek, Eran O. [Benoziyo Center for Astrophysics, Weizmann Institute of Science, 76100 Rehovot (Israel); Covey, Kevin R. [Lowell Observatory, 1400 West Mars Hill Road, Flagstaff, AZ 86001 (United States); Levitan, David; Sesar, Branimir [Division of Physics, Mathematics, and Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Laher, Russ R.; Surace, Jason, E-mail: adrn@astro.columbia.edu [Spitzer Science Center, California Institute of Technology, Mail Stop 314-6, Pasadena, CA 91125 (United States)

    2014-01-20

    Many photometric time-domain surveys are driven by specific goals, such as searches for supernovae or transiting exoplanets, which set the cadence with which fields are re-imaged. In the case of the Palomar Transient Factory (PTF), several sub-surveys are conducted in parallel, leading to non-uniform sampling over its ∼20,000 deg{sup 2} footprint. While the median 7.26 deg{sup 2} PTF field has been imaged ∼40 times in the R band, ∼2300 deg{sup 2} have been observed >100 times. We use PTF data to study the trade off between searching for microlensing events in a survey whose footprint is much larger than that of typical microlensing searches, but with far-from-optimal time sampling. To examine the probability that microlensing events can be recovered in these data, we test statistics used on uniformly sampled data to identify variables and transients. We find that the von Neumann ratio performs best for identifying simulated microlensing events in our data. We develop a selection method using this statistic and apply it to data from fields with >10 R-band observations, 1.1 × 10{sup 9} light curves, uncovering three candidate microlensing events. We lack simultaneous, multi-color photometry to confirm these as microlensing events. However, their number is consistent with predictions for the event rate in the PTF footprint over the survey's three years of operations, as estimated from near-field microlensing models. This work can help constrain all-sky event rate predictions and tests microlensing signal recovery in large data sets, which will be useful to future time-domain surveys, such as that planned with the Large Synoptic Survey Telescope.

  17. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys.

    Science.gov (United States)

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-09-01

    To examine sociodemographic and behavioural differences between men who have sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey. We compared 148 MSM aged 18-64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010-2012, with men in the same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European MSM Internet Survey (EMIS); 797 in the London Gay Men's Sexual Health Survey; and 1234 in Scotland's Gay Men's Sexual Health Survey. Analyses compared men reporting at least one male sexual partner (past year) on similarly worded questions and multivariable analyses accounted for sociodemographic differences between the surveys. MSM in convenience surveys were younger and better educated than MSM in Natsal-3, and a larger proportion identified as gay (85%-95% vs 62%). Partner numbers were higher and same-sex anal sex more common in convenience surveys. Unprotected anal intercourse was more commonly reported in EMIS. Compared with Natsal-3, MSM in convenience surveys were more likely to report gonorrhoea diagnoses and HIV testing (both past year). Differences between the samples were reduced when restricting analysis to gay-identifying MSM. National probability surveys better reflect the population of MSM but are limited by their smaller samples of MSM. Convenience surveys recruit larger samples of MSM but tend to over-represent MSM identifying as gay and reporting more sexual risk behaviours. Because both sampling strategies have strengths and weaknesses, methods are needed to triangulate data from probability and convenience surveys. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  18. Performance of local information-based link prediction: a sampling perspective

    Science.gov (United States)

    Zhao, Jichang; Feng, Xu; Dong, Li; Liang, Xiao; Xu, Ke

    2012-08-01

    Link prediction is pervasively employed to uncover the missing links in the snapshots of real-world networks, which are usually obtained through different kinds of sampling methods. In the previous literature, in order to evaluate the performance of the prediction, known edges in the sampled snapshot are divided into the training set and the probe set randomly, without considering the underlying sampling approaches. However, different sampling methods might lead to different missing links, especially for the biased ways. For this reason, random partition-based evaluation of performance is no longer convincing if we take the sampling method into account. In this paper, we try to re-evaluate the performance of local information-based link predictions through sampling method governed division of the training set and the probe set. It is interesting that we find that for different sampling methods, each prediction approach performs unevenly. Moreover, most of these predictions perform weakly when the sampling method is biased, which indicates that the performance of these methods might have been overestimated in the prior works.

  19. A Nationwide Random Sampling Survey of Potential Complicated Grief in Japan

    Science.gov (United States)

    Mizuno, Yasunao; Kishimoto, Junji; Asukai, Nozomu

    2012-01-01

    To investigate the prevalence of significant loss, potential complicated grief (CG), and its contributing factors, we conducted a nationwide random sampling survey of Japanese adults aged 18 or older (N = 1,343) using a self-rating Japanese-language version of the Complicated Grief Brief Screen. Among them, 37.0% experienced their most significant…

  20. Predicting sample size required for classification performance

    Directory of Open Access Journals (Sweden)

    Figueroa Rosa L

    2012-02-01

    Full Text Available Abstract Background Supervised learning methods need annotated data in order to generate efficient models. Annotated data, however, is a relatively scarce resource and can be expensive to obtain. For both passive and active learning methods, there is a need to estimate the size of the annotated sample required to reach a performance target. Methods We designed and implemented a method that fits an inverse power law model to points of a given learning curve created using a small annotated training set. Fitting is carried out using nonlinear weighted least squares optimization. The fitted model is then used to predict the classifier's performance and confidence interval for larger sample sizes. For evaluation, the nonlinear weighted curve fitting method was applied to a set of learning curves generated using clinical text and waveform classification tasks with active and passive sampling methods, and predictions were validated using standard goodness of fit measures. As control we used an un-weighted fitting method. Results A total of 568 models were fitted and the model predictions were compared with the observed performances. Depending on the data set and sampling method, it took between 80 to 560 annotated samples to achieve mean average and root mean squared error below 0.01. Results also show that our weighted fitting method outperformed the baseline un-weighted method (p Conclusions This paper describes a simple and effective sample size prediction algorithm that conducts weighted fitting of learning curves. The algorithm outperformed an un-weighted algorithm described in previous literature. It can help researchers determine annotation sample size for supervised machine learning.

  1. Improved sampling for airborne surveys to estimate wildlife population parameters in the African Savannah

    NARCIS (Netherlands)

    Khaemba, W.; Stein, A.

    2002-01-01

    Parameter estimates, obtained from airborne surveys of wildlife populations, often have large bias and large standard errors. Sampling error is one of the major causes of this imprecision and the occurrence of many animals in herds violates the common assumptions in traditional sampling designs like

  2. Adaptive geostatistical sampling enables efficient identification of malaria hotspots in repeated cross-sectional surveys in rural Malawi.

    Directory of Open Access Journals (Sweden)

    Alinune N Kabaghe

    Full Text Available In the context of malaria elimination, interventions will need to target high burden areas to further reduce transmission. Current tools to monitor and report disease burden lack the capacity to continuously detect fine-scale spatial and temporal variations of disease distribution exhibited by malaria. These tools use random sampling techniques that are inefficient for capturing underlying heterogeneity while health facility data in resource-limited settings are inaccurate. Continuous community surveys of malaria burden provide real-time results of local spatio-temporal variation. Adaptive geostatistical design (AGD improves prediction of outcome of interest compared to current random sampling techniques. We present findings of continuous malaria prevalence surveys using an adaptive sampling design.We conducted repeated cross sectional surveys guided by an adaptive sampling design to monitor the prevalence of malaria parasitaemia and anaemia in children below five years old in the communities living around Majete Wildlife Reserve in Chikwawa district, Southern Malawi. AGD sampling uses previously collected data to sample new locations of high prediction variance or, where prediction exceeds a set threshold. We fitted a geostatistical model to predict malaria prevalence in the area.We conducted five rounds of sampling, and tested 876 children aged 6-59 months from 1377 households over a 12-month period. Malaria prevalence prediction maps showed spatial heterogeneity and presence of hotspots-where predicted malaria prevalence was above 30%; predictors of malaria included age, socio-economic status and ownership of insecticide-treated mosquito nets.Continuous malaria prevalence surveys using adaptive sampling increased malaria prevalence prediction accuracy. Results from the surveys were readily available after data collection. The tool can assist local managers to target malaria control interventions in areas with the greatest health impact and is

  3. Performance of Ductless Personalized Ventilation in Open-Plan Office - Field Survey

    DEFF Research Database (Denmark)

    Dalewski, Mariusz; Ezzat Khalifa, H.; Melikov, Arsen Krikor

    2013-01-01

    A field survey was conducted in an architectural company located in Syracuse, USA. 54 employees who participated in the survey performed mostly design work. Large open-plan office and several single offices ventilated by displacement air distribution were included in the survey. Ductless...

  4. Insomnia and the Performance of US Workers: Results from the America Insomnia Survey

    Science.gov (United States)

    Kessler, Ronald C.; Berglund, Patricia A.; Coulouvrat, Catherine; Hajak, Goeran; Roth, Thomas; Shahly, Victoria; Shillington, Alicia C.; Stephenson, Judith J.; Walsh, James K.

    2011-01-01

    Study Objectives: To estimate the prevalence and associations of broadly defined (i.e., meeting full ICD-10, DSM-IV, or RDC/ICSD-2 inclusion criteria) insomnia with work performance net of comorbid conditions in the America Insomnia Survey (AIS). Design/Setting: Cross-sectional telephone survey. Participants: National sample of 7,428 employed health plan subscribers (ages 18+). Interventions: None. Measurements and Results: Broadly defined insomnia was assessed with the Brief Insomnia Questionnaire (BIQ). Work absenteeism and presenteeism (low on-the-job work performance defined in the metric of lost workday equivalents) were assessed with the WHO Health and Work Performance Questionnaire (HPQ). Regression analysis examined associations between insomnia and HPQ scores controlling 26 comorbid conditions based on self-report and medical/pharmacy claims records. The estimated prevalence of insomnia was 23.2%. Insomnia was significantly associated with lost work performance due to presenteeism (χ21 = 39.5, P absenteeism (χ21 = 3.2, P = 0.07), with an annualized individual-level association of insomnia with presenteeism equivalent to 11.3 days of lost work performance. This estimate decreased to 7.8 days when controls were introduced for comorbid conditions. The individual-level human capital value of this net estimate was $2,280. If we provisionally assume these estimates generalize to the total US workforce, they are equivalent to annualized population-level estimates of 252.7 days and $63.2 billion. Conclusions: Insomnia is associated with substantial workplace costs. Although experimental studies suggest some of these costs could be recovered with insomnia disease management programs, effectiveness trials are needed to obtain precise estimates of return-on-investment of such interventions from the employer perspective. Citation: Kessler RC; Berglund PA; Coulouvrat C; Hajak G; Roth T; Shahly V; Shillington AC; Stephenson JJ; Walsh JK. Insomnia and the performance

  5. Sampling methods. A survey of methods in use in the Nordic countries

    International Nuclear Information System (INIS)

    Isaksson, M.

    2000-10-01

    This report is a survey of sampling techniques currently in use for radioactivity measurements in the Nordic countries, but restricted to sampling techniques for pasture, soil and deposition in emergency situations. It is found that the participating laboratories apply similar sampling procedures for pasture, including cutting height and size of sampled areas. Soil samples are generally taken by some sort of corer of different diameter. The number of cores taken varies, different sampling patterns are used, and pooling of the samples is done by some of the laboratories. The analysis of pasture and of soil is made with Nal-detectors or by high-resolution gamma spectrometry on fresh or dried samples. Precipitation collectors of a range of sizes are used to determine the activity concentration in precipitation and of dry deposited radionuclides. The analysis is made with high-resolution gamma-spectrometry, either directly on a water sample or on ion exchange resins. (au)

  6. CT dose survey in adults: what sample size for what precision?

    International Nuclear Information System (INIS)

    Taylor, Stephen; Muylem, Alain van; Howarth, Nigel; Gevenois, Pierre Alain; Tack, Denis

    2017-01-01

    To determine variability of volume computed tomographic dose index (CTDIvol) and dose-length product (DLP) data, and propose a minimum sample size to achieve an expected precision. CTDIvol and DLP values of 19,875 consecutive CT acquisitions of abdomen (7268), thorax (3805), lumbar spine (3161), cervical spine (1515) and head (4106) were collected in two centers. Their variabilities were investigated according to sample size (10 to 1000 acquisitions) and patient body weight categories (no weight selection, 67-73 kg and 60-80 kg). The 95 % confidence interval in percentage of their median (CI95/med) value was calculated for increasing sample sizes. We deduced the sample size that set a 95 % CI lower than 10 % of the median (CI95/med ≤ 10 %). Sample size ensuring CI95/med ≤ 10 %, ranged from 15 to 900 depending on the body region and the dose descriptor considered. In sample sizes recommended by regulatory authorities (i.e., from 10-20 patients), mean CTDIvol and DLP of one sample ranged from 0.50 to 2.00 times its actual value extracted from 2000 samples. The sampling error in CTDIvol and DLP means is high in dose surveys based on small samples of patients. Sample size should be increased at least tenfold to decrease this variability. (orig.)

  7. CT dose survey in adults: what sample size for what precision?

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Stephen [Hopital Ambroise Pare, Department of Radiology, Mons (Belgium); Muylem, Alain van [Hopital Erasme, Department of Pneumology, Brussels (Belgium); Howarth, Nigel [Clinique des Grangettes, Department of Radiology, Chene-Bougeries (Switzerland); Gevenois, Pierre Alain [Hopital Erasme, Department of Radiology, Brussels (Belgium); Tack, Denis [EpiCURA, Clinique Louis Caty, Department of Radiology, Baudour (Belgium)

    2017-01-15

    To determine variability of volume computed tomographic dose index (CTDIvol) and dose-length product (DLP) data, and propose a minimum sample size to achieve an expected precision. CTDIvol and DLP values of 19,875 consecutive CT acquisitions of abdomen (7268), thorax (3805), lumbar spine (3161), cervical spine (1515) and head (4106) were collected in two centers. Their variabilities were investigated according to sample size (10 to 1000 acquisitions) and patient body weight categories (no weight selection, 67-73 kg and 60-80 kg). The 95 % confidence interval in percentage of their median (CI95/med) value was calculated for increasing sample sizes. We deduced the sample size that set a 95 % CI lower than 10 % of the median (CI95/med ≤ 10 %). Sample size ensuring CI95/med ≤ 10 %, ranged from 15 to 900 depending on the body region and the dose descriptor considered. In sample sizes recommended by regulatory authorities (i.e., from 10-20 patients), mean CTDIvol and DLP of one sample ranged from 0.50 to 2.00 times its actual value extracted from 2000 samples. The sampling error in CTDIvol and DLP means is high in dose surveys based on small samples of patients. Sample size should be increased at least tenfold to decrease this variability. (orig.)

  8. A Unimodal Model for Double Observer Distance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Earl F Becker

    Full Text Available Distance sampling is a widely used method to estimate animal population size. Most distance sampling models utilize a monotonically decreasing detection function such as a half-normal. Recent advances in distance sampling modeling allow for the incorporation of covariates into the distance model, and the elimination of the assumption of perfect detection at some fixed distance (usually the transect line with the use of double-observer models. The assumption of full observer independence in the double-observer model is problematic, but can be addressed by using the point independence assumption which assumes there is one distance, the apex of the detection function, where the 2 observers are assumed independent. Aerially collected distance sampling data can have a unimodal shape and have been successfully modeled with a gamma detection function. Covariates in gamma detection models cause the apex of detection to shift depending upon covariate levels, making this model incompatible with the point independence assumption when using double-observer data. This paper reports a unimodal detection model based on a two-piece normal distribution that allows covariates, has only one apex, and is consistent with the point independence assumption when double-observer data are utilized. An aerial line-transect survey of black bears in Alaska illustrate how this method can be applied.

  9. Belief Control Practices and Organizational Performances: A Survey ...

    African Journals Online (AJOL)

    Belief Control Practices and Organizational Performances: A Survey of Sugar Industry in Kenya. ... employees in the company core values and design of strategic control systems to cope with changing internal and external operating business ...

  10. Comparing the performance of cluster random sampling and integrated threshold mapping for targeting trachoma control, using computer simulation.

    Directory of Open Access Journals (Sweden)

    Jennifer L Smith

    Full Text Available Implementation of trachoma control strategies requires reliable district-level estimates of trachomatous inflammation-follicular (TF, generally collected using the recommended gold-standard cluster randomized surveys (CRS. Integrated Threshold Mapping (ITM has been proposed as an integrated and cost-effective means of rapidly surveying trachoma in order to classify districts according to treatment thresholds. ITM differs from CRS in a number of important ways, including the use of a school-based sampling platform for children aged 1-9 and a different age distribution of participants. This study uses computerised sampling simulations to compare the performance of these survey designs and evaluate the impact of varying key parameters.Realistic pseudo gold standard data for 100 districts were generated that maintained the relative risk of disease between important sub-groups and incorporated empirical estimates of disease clustering at the household, village and district level. To simulate the different sampling approaches, 20 clusters were selected from each district, with individuals sampled according to the protocol for ITM and CRS. Results showed that ITM generally under-estimated the true prevalence of TF over a range of epidemiological settings and introduced more district misclassification according to treatment thresholds than did CRS. However, the extent of underestimation and resulting misclassification was found to be dependent on three main factors: (i the district prevalence of TF; (ii the relative risk of TF between enrolled and non-enrolled children within clusters; and (iii the enrollment rate in schools.Although in some contexts the two methodologies may be equivalent, ITM can introduce a bias-dependent shift as prevalence of TF increases, resulting in a greater risk of misclassification around treatment thresholds. In addition to strengthening the evidence base around choice of trachoma survey methodologies, this study illustrates

  11. The economic impact of poor sample quality in clinical chemistry laboratories: results from a global survey.

    Science.gov (United States)

    Erdal, Erik P; Mitra, Debanjali; Khangulov, Victor S; Church, Stephen; Plokhoy, Elizabeth

    2017-03-01

    Background Despite advances in clinical chemistry testing, poor blood sample quality continues to impact laboratory operations and the quality of results. While previous studies have identified the preanalytical causes of lower sample quality, few studies have examined the economic impact of poor sample quality on the laboratory. Specifically, the costs associated with workarounds related to fibrin and gel contaminants remain largely unexplored. Methods A quantitative survey of clinical chemistry laboratory stakeholders across 10 international regions, including countries in North America, Europe and Oceania, was conducted to examine current blood sample testing practices, sample quality issues and practices to remediate poor sample quality. Survey data were used to estimate costs incurred by laboratories to mitigate sample quality issues. Results Responses from 164 participants were included in the analysis, which was focused on three specific issues: fibrin strands, fibrin masses and gel globules. Fibrin strands were the most commonly reported issue, with an overall incidence rate of ∼3%. Further, 65% of respondents indicated that these issues contribute to analyzer probe clogging, and the majority of laboratories had visual inspection and manual remediation practices in place to address fibrin- and gel-related quality problems (55% and 70%, respectively). Probe maintenance/replacement, visual inspection and manual remediation were estimated to carry significant costs for the laboratories surveyed. Annual cost associated with lower sample quality and remediation related to fibrin and/or gel globules for an average US laboratory was estimated to be $100,247. Conclusions Measures to improve blood sample quality present an important step towards improved laboratory operations.

  12. Shorlist Masterplan Wind. Evaluation of the sampling grid of the year-round ichthyoplankton survey

    NARCIS (Netherlands)

    Bolle, L.J.; Beek, van J.K.L.

    2011-01-01

    Within the research programme 'Shortlist Masterplan Wind' a year-round ichthyoplankton survey is being carried out. The sampling area is based on known spawning concentrations and prevailing currents.

  13. African primary care research: performing surveys using questionnaires.

    Science.gov (United States)

    Govender, Indiran; Mabuza, Langalibalele H; Ogunbanjo, Gboyega A; Mash, Bob

    2014-04-25

    The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on primary care research, with other articles in the series focusing on the structure of the research proposal and the literature review, as well as quantitative data analysis.

  14. A survey of archaeological and geological samples dated in 1990

    International Nuclear Information System (INIS)

    Mejdahl, V.

    1991-01-01

    A survey of dated archaeological and geological samples is given, using thermoluminescence dating. Some of the sediment samples were also dated by means of optically stimulated luminescence (OSL) using a newly developed infrared diode system. In most cases the luminescence dates are in accordance with archaeological and geological estimates. Some discrepancies were found because some feldspar samples exhibited severe anomalous fading. It may be possible to avoid this problem by basing the dating on OSL of quartz. For sediment samples of Eemian or Early Weichselian age severe underestimates were encountered with both methods. The reason might be related to the large difference between the natural dose rate and that used in laboratory irradiations. Traps corresponding to low-temperature peaks such as the 150 deg. C peak in feldspars will remain almost empty under natural conditions, but will fill up to saturation under laboratory irradiation and thereby more charges will be captured in high-temperature traps. As a result, natural growth curves and laboratory produced luminescence growth curves will have different slopes and this will lead to underestimation. This problem might avoided by holding samples at an elevated temperature during laboratory irradiation, thus keeping the low-temperature traps empty. Preliminary experiments where feldspar samples were held at 130 deg. C during irradiation have given promising results. (AB) (31 refs.)

  15. Evaluation of common methods for sampling invertebrate pollinator assemblages: net sampling out-perform pan traps.

    Science.gov (United States)

    Popic, Tony J; Davila, Yvonne C; Wardle, Glenda M

    2013-01-01

    Methods for sampling ecological assemblages strive to be efficient, repeatable, and representative. Unknowingly, common methods may be limited in terms of revealing species function and so of less value for comparative studies. The global decline in pollination services has stimulated surveys of flower-visiting invertebrates, using pan traps and net sampling. We explore the relative merits of these two methods in terms of species discovery, quantifying abundance, function, and composition, and responses of species to changing floral resources. Using a spatially-nested design we sampled across a 5000 km(2) area of arid grasslands, including 432 hours of net sampling and 1296 pan trap-days, between June 2010 and July 2011. Net sampling yielded 22% more species and 30% higher abundance than pan traps, and better reflected the spatio-temporal variation of floral resources. Species composition differed significantly between methods; from 436 total species, 25% were sampled by both methods, 50% only by nets, and the remaining 25% only by pans. Apart from being less comprehensive, if pan traps do not sample flower-visitors, the link to pollination is questionable. By contrast, net sampling functionally linked species to pollination through behavioural observations of flower-visitation interaction frequency. Netted specimens are also necessary for evidence of pollen transport. Benefits of net-based sampling outweighed minor differences in overall sampling effort. As pan traps and net sampling methods are not equivalent for sampling invertebrate-flower interactions, we recommend net sampling of invertebrate pollinator assemblages, especially if datasets are intended to document declines in pollination and guide measures to retain this important ecosystem service.

  16. Insomnia and the performance of US workers: results from the America insomnia survey.

    Science.gov (United States)

    Kessler, Ronald C; Berglund, Patricia A; Coulouvrat, Catherine; Hajak, Goeran; Roth, Thomas; Shahly, Victoria; Shillington, Alicia C; Stephenson, Judith J; Walsh, James K

    2011-09-01

    To estimate the prevalence and associations of broadly defined (i.e., meeting full ICD-10, DSM-IV, or RDC/ICSD-2 inclusion criteria) insomnia with work performance net of comorbid conditions in the America Insomnia Survey (AIS). Cross-sectional telephone survey. National sample of 7,428 employed health plan subscribers (ages 18+). None. Broadly defined insomnia was assessed with the Brief Insomnia Questionnaire (BIQ). Work absenteeism and presenteeism (low on-the-job work performance defined in the metric of lost workday equivalents) were assessed with the WHO Health and Work Performance Questionnaire (HPQ). Regression analysis examined associations between insomnia and HPQ scores controlling 26 comorbid conditions based on self-report and medical/pharmacy claims records. The estimated prevalence of insomnia was 23.2%. Insomnia was significantly associated with lost work performance due to presenteeism (χ² (1) = 39.5, P absenteeism (χ² (1) = 3.2, P = 0.07), with an annualized individual-level association of insomnia with presenteeism equivalent to 11.3 days of lost work performance. This estimate decreased to 7.8 days when controls were introduced for comorbid conditions. The individual-level human capital value of this net estimate was $2,280. If we provisionally assume these estimates generalize to the total US workforce, they are equivalent to annualized population-level estimates of 252.7 days and $63.2 billion. Insomnia is associated with substantial workplace costs. Although experimental studies suggest some of these costs could be recovered with insomnia disease management programs, effectiveness trials are needed to obtain precise estimates of return-on-investment of such interventions from the employer perspective.

  17. Small-vessel Survey and Auction Sampling to Estimate Growth and Maturity of Eteline Snappers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Small-vessel Survey and Auction Sampling to Estimate Growth and Maturity of Eteline Snappers and Improve Data-Limited Stock Assessments. This biosampling project...

  18. National sample survey to assess the new case disease burden of leprosy in India

    Directory of Open Access Journals (Sweden)

    Kiran Katoch

    2017-01-01

    Full Text Available A national sample survey of leprosy was undertaken in partnership with Indian Council of Medical Research (ICMR institutions, National Leprosy Eradication Programme (NLEP, Panchayati Raj members, and treated leprosy patients to detect new cases of leprosy in India. The objectives of the survey were to estimate the new leprosy case load; record both Grade 1 and Grade 2 disabilities in the new cases; and to assess the magnitude of stigma and discrimination prevalent in the society. A cluster based, cross-sectional survey involving all States was used for the door-to-door survey using inverse sampling methodology. Rural and urban clusters were sampled separately. The population screened for detecting 28 new cases in rural and 30 in urban clusters was enumerated, recorded and analyzed. Data capture and analysis in different schedules were the main tools used. For quality control three tiers of experts were utilized for the confirmation of cases and disabilities. Self-stigma was assessed in more than half of the total new patients detected with disabilities by the approved questionnaire. A different questionnaire was used to assess the stigma in the community. A population of 14,725,525 (10,302,443 rural; 4,423,082 urban was screened and 2161 new cases - 1300 paucibacillary (PB and 861 multibacillary (MB were detected. New case estimates for leprosy was 330,346 (95% Confidence limits, 287,445-380,851. Disabilities observed in these cases were 2.05/100,000 population and 13.9 per cent (302/2161 in new cases. Self-stigma in patients with disabilities was reduced, and the patients were well accepted by the spouse, neighbour, at workplace and in social functions.

  19. Nuclear safeguards surveys as performed by the Albuquerque operations office

    International Nuclear Information System (INIS)

    Jewell, D.

    1987-01-01

    The nuclear safeguards survey program as administered by the Albuquerque Operations Office (AL) is comprehensive in scope and evaluates the facility's safeguards program for an entire appraisal period. The survey program focuses on both the integrated and graded safeguards concepts and includes both compliance and performance evaluations. The program utilizes independent measurement support to verify facility inventory values and measurement system capabilities. The AL survey program is oriented towards facility development and management as opposed to development and management by numerous detailed departmental directives

  20. Relationship Between Hospital Performance on a Patient Satisfaction Survey and Surgical Quality.

    Science.gov (United States)

    Sacks, Greg D; Lawson, Elise H; Dawes, Aaron J; Russell, Marcia M; Maggard-Gibbons, Melinda; Zingmond, David S; Ko, Clifford Y

    2015-09-01

    The Centers for Medicare and Medicaid Services include patient experience as a core component of its Value-Based Purchasing program, which ties financial incentives to hospital performance on a range of quality measures. However, it remains unclear whether patient satisfaction is an accurate marker of high-quality surgical care. To determine whether hospital performance on a patient satisfaction survey is associated with objective measures of surgical quality. Retrospective observational study of participating American College of Surgeons National Surgical Quality Improvement Project (ACS NSQIP) hospitals. We used data from a linked database of Medicare inpatient claims, ACS NSQIP, the American Hospital Association annual survey, and Hospital Compare from December 2, 2004, through December 31, 2008. A total of 103 866 patients older than 65 years undergoing inpatient surgery were included. Hospitals were grouped by quartile based on their performance on the Hospital Consumer Assessment of Healthcare Providers and Systems survey. Controlling for preoperative risk factors, we created hierarchical logistic regression models to predict the occurrence of adverse postoperative outcomes based on a hospital's patient satisfaction scores. Thirty-day postoperative mortality, major and minor complications, failure to rescue, and hospital readmission. Of the 180 hospitals, the overall mean patient satisfaction score was 68.0% (first quartile mean, 58.7%; fourth quartile mean, 76.7%). Compared with patients treated at hospitals in the lowest quartile, those at the highest quartile had significantly lower risk-adjusted odds of death (odds ratio = 0.85; 95% CI, 0.73-0.99), failure to rescue (odds ratio = 0.82; 95% CI, 0.70-0.96), and minor complication (odds ratio = 0.87; 95% CI, 0.75-0.99). This translated to relative risk reductions of 11.1% (P = .04), 12.6% (P = .02), and 11.5% (P = .04), respectively. No significant relationship was noted between patient satisfaction

  1. Evaluation of common methods for sampling invertebrate pollinator assemblages: net sampling out-perform pan traps.

    Directory of Open Access Journals (Sweden)

    Tony J Popic

    Full Text Available Methods for sampling ecological assemblages strive to be efficient, repeatable, and representative. Unknowingly, common methods may be limited in terms of revealing species function and so of less value for comparative studies. The global decline in pollination services has stimulated surveys of flower-visiting invertebrates, using pan traps and net sampling. We explore the relative merits of these two methods in terms of species discovery, quantifying abundance, function, and composition, and responses of species to changing floral resources. Using a spatially-nested design we sampled across a 5000 km(2 area of arid grasslands, including 432 hours of net sampling and 1296 pan trap-days, between June 2010 and July 2011. Net sampling yielded 22% more species and 30% higher abundance than pan traps, and better reflected the spatio-temporal variation of floral resources. Species composition differed significantly between methods; from 436 total species, 25% were sampled by both methods, 50% only by nets, and the remaining 25% only by pans. Apart from being less comprehensive, if pan traps do not sample flower-visitors, the link to pollination is questionable. By contrast, net sampling functionally linked species to pollination through behavioural observations of flower-visitation interaction frequency. Netted specimens are also necessary for evidence of pollen transport. Benefits of net-based sampling outweighed minor differences in overall sampling effort. As pan traps and net sampling methods are not equivalent for sampling invertebrate-flower interactions, we recommend net sampling of invertebrate pollinator assemblages, especially if datasets are intended to document declines in pollination and guide measures to retain this important ecosystem service.

  2. Can smartphones measure momentary quality of life and participation? A proof of concept using experience sampling surveys with university students.

    Science.gov (United States)

    Liddle, Jacki; Wishink, Anna; Springfield, Liz; Gustafsson, Louise; Ireland, David; Silburn, Peter

    2017-08-01

    Understanding quality of life and participation is a key aspect of occupational therapy research. The use of smartphones to deliver experience-sampling surveys may provide an accessible way to monitor these outcomes. This study used smartphone-based experience sampling methods (ESM) to investigate factors influencing momentary quality of life (mQOL) of university students. A convenience sample of students at an Australian university participated. Using a custom smartphone application, ESM surveys were sent six to eight times, every second day, over a week. Participants indicated their mQOL, occupational participation, occupational enjoyment, social context and location via surveys and provided demographic and health information in a single self-report questionnaire. The relationship between mQOL and variables was analysed at the survey level using logistic regression. Forty students completed 391 surveys. Higher mQOL was significantly related to participation in productive occupations (z = 3.48; P = 0.001), moderate (z = 4.00; P sample, analysing at the individual level, and using ESM in conjunction with other methodologies is recommended. © 2017 Occupational Therapy Australia.

  3. Prevalence of dementia-associated disability among Chinese older adults: results from a national sample survey.

    Science.gov (United States)

    Li, Ning; Zhang, Lei; Du, Wei; Pang, Lihua; Guo, Chao; Chen, Gong; Zheng, Xiaoying

    2015-03-01

    Due to rapid population aging and a tidal wave of dementia, dementia has become an urgent public health issue in China. Few large-scale surveys on dementia have been conducted in China and little was known about the magnitude of dysfunction and disability caused by dementia. In this study, using national sample survey data, we aimed to describe the prevalence rate of dementia-associated disability, its associated factors, and daily activities and social functions of people with dementia-associated disability in Chinese older adults. We used the second China National Sample Survey on Disability, comprising 2,526,145 persons from 771,797 households. Identification for dementia was based on consensus manuals. Standard weighting procedures were used to construct sample weights considering the multistage stratified cluster sampling survey scheme. Population weighted numbers, weighted prevalence, and the odd ratios (ORs) were calculated. The prevalence rate of dementia-associated disability was 4.64% (95% CI: 4.26-5.01) and it accounted for 41.03% of mental disability among Chinese older adults. Urban residence (OR: 1.33 [1.12-1.57]), older age (80+ years) (OR: 4.12 [3.38-.03]), illiteracy (OR: 1.79 [1.27-2.53]), and currently not married (OR: 1.15 [1.00-1.32]) were associated with increased risk of dementia-associated disability. Compared with those with mental disability of other causes and those with other types of disabilities, older adults with dementia-asscoiated disability were more likely to have severe or extreme difficulty in daily activities and social functions. Countermeasures are warranted to obtain a more precise overview of dementia in China, and strategies on enhancing early identification, treatment, and rehabilitation should be developed for people with dementia. Copyright © 2015 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

  4. The ESO Diffuse Interstellar Bands Large Exploration Survey (EDIBLES) . I. Project description, survey sample, and quality assessment

    Science.gov (United States)

    Cox, Nick L. J.; Cami, Jan; Farhang, Amin; Smoker, Jonathan; Monreal-Ibero, Ana; Lallement, Rosine; Sarre, Peter J.; Marshall, Charlotte C. M.; Smith, Keith T.; Evans, Christopher J.; Royer, Pierre; Linnartz, Harold; Cordiner, Martin A.; Joblin, Christine; van Loon, Jacco Th.; Foing, Bernard H.; Bhatt, Neil H.; Bron, Emeric; Elyajouri, Meriem; de Koter, Alex; Ehrenfreund, Pascale; Javadi, Atefeh; Kaper, Lex; Khosroshadi, Habib G.; Laverick, Mike; Le Petit, Franck; Mulas, Giacomo; Roueff, Evelyne; Salama, Farid; Spaans, Marco

    2017-10-01

    The carriers of the diffuse interstellar bands (DIBs) are largely unidentified molecules ubiquitously present in the interstellar medium (ISM). After decades of study, two strong and possibly three weak near-infrared DIBs have recently been attributed to the C60^+ fullerene based on observational and laboratory measurements. There is great promise for the identification of the over 400 other known DIBs, as this result could provide chemical hints towards other possible carriers. In an effort tosystematically study the properties of the DIB carriers, we have initiated a new large-scale observational survey: the ESO Diffuse Interstellar Bands Large Exploration Survey (EDIBLES). The main objective is to build on and extend existing DIB surveys to make a major step forward in characterising the physical and chemical conditions for a statistically significant sample of interstellar lines-of-sight, with the goal to reverse-engineer key molecular properties of the DIB carriers. EDIBLES is a filler Large Programme using the Ultraviolet and Visual Echelle Spectrograph at the Very Large Telescope at Paranal, Chile. It is designed to provide an observationally unbiased view of the presence and behaviour of the DIBs towards early-spectral-type stars whose lines-of-sight probe the diffuse-to-translucent ISM. Such a complete dataset will provide a deep census of the atomic and molecular content, physical conditions, chemical abundances and elemental depletion levels for each sightline. Achieving these goals requires a homogeneous set of high-quality data in terms of resolution (R 70 000-100 000), sensitivity (S/N up to 1000 per resolution element), and spectral coverage (305-1042 nm), as well as a large sample size (100+ sightlines). In this first paper the goals, objectives and methodology of the EDIBLES programme are described and an initial assessment of the data is provided.

  5. Global review of health care surveys using lot quality assurance sampling (LQAS), 1984-2004.

    Science.gov (United States)

    Robertson, Susan E; Valadez, Joseph J

    2006-09-01

    We conducted a global review on the use of lot quality assurance sampling (LQAS) to assess health care services, health behaviors, and disease burden. Publications and reports on LQAS surveys were sought from Medline and five other electronic databases; the World Health Organization; the World Bank; governments, nongovernmental organizations, and individual scientists. We identified a total of 805 LQAS surveys conducted by different management groups during January 1984 through December 2004. There was a striking increase in the annual number of LQAS surveys conducted in 2000-2004 (128/year) compared with 1984-1999 (10/year). Surveys were conducted in 55 countries, and in 12 of these countries there were 10 or more LQAS surveys. Geographically, 317 surveys (39.4%) were conducted in Africa, 197 (28.5%) in the Americas, 115 (14.3%) in the Eastern Mediterranean, 114 (14.2%) in South-East Asia, 48 (6.0%) in Europe, and 14 (1.8%) in the Western Pacific. Health care parameters varied, and some surveys assessed more than one parameter. There were 320 surveys about risk factors for HIV/AIDS/sexually transmitted infections; 266 surveys on immunization coverage, 240 surveys post-disasters, 224 surveys on women's health, 142 surveys on growth and nutrition, 136 surveys on diarrheal disease control, and 88 surveys on quality management. LQAS surveys to assess disease burden included 23 neonatal tetanus mortality surveys and 12 surveys on other diseases. LQAS is a practical field method which increasingly is being applied in assessment of preventive and curative health services, and may offer new research opportunities to social scientists. When LQAS data are collected recurrently at multiple time points, they can be used to measure the spatial variation in behavior change. Such data provide insight into understanding relationships between various investments in social, human, and physical capital, and into the effectiveness of different public health strategies in achieving

  6. Effects of sample survey design on the accuracy of classification tree models in species distribution models

    Science.gov (United States)

    Thomas C. Edwards; D. Richard Cutler; Niklaus E. Zimmermann; Linda Geiser; Gretchen G. Moisen

    2006-01-01

    We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by...

  7. Off-road sampling reveals a different grassland bird community than roadside sampling: implications for survey design and estimates to guide conservation

    Directory of Open Access Journals (Sweden)

    Troy I. Wellicome

    2014-06-01

    concern. Our results highlight the need to develop appropriate corrections for bias in estimates derived from roadside sampling, and the need to design surveys that sample bird communities across a more representative cross-section of the landscape, both near and far from roads.

  8. Competitiveness of firms, performance and customer orientation measures – empirical survey results

    Directory of Open Access Journals (Sweden)

    Alena Klapalová

    2011-01-01

    Full Text Available The purpose of this paper is to presents results from two empirical surveys concerning selected factors which can be connected to customer orientation, performance and competitiveness of firms. The purpose of the surveys was also to reveal potential differences between sectors arising from not only the different influences of internal but as well as external environment. A survey instrument was developed to analyse the relationship between several variables measuring customer orientation of surveyed firms and between these factors and level of financial performance. Several statistical methods were applied to analyse the data, specifically descriptive statistics (means and standard deviations, one-way analysis of variance (ANOVA with Bonferroni post-hoc test using financial performance for clustering firms and for assessment of potential differences of customer orientation criteria evaluation and Spearman rank correlation coefficients to assess the linear bivariate relationship between customer orientation variables. The results of ANOVA show that only the innovativeness is distinctive distinguishing criteria in conformity with the indicators of financial prosperity and that there are some differences between companies from two groups of sectors within the managers’ perception of customer orientation criteria performance.

  9. Relationship between Performance of Quantity Surveying Students in Building Construction and Construction Measurement Courses

    Directory of Open Access Journals (Sweden)

    Olatunde Nathaniel Ayinde

    2018-01-01

    Full Text Available Stakeholders in the educational sector over the century have devoted substantial resources in seeking ways of improving students’ academic performance, yet, the desired improved academic performance has not been achieved. By appraising the relationship between the performance of Quantity Surveying (QS students in Building Construction and Construction Measurement courses; the study identified a major curriculum drafting deficiency in the QS programmes in Nigeria which if addressed could help achieve the much needed improved students’ academic performance. The specific objectives of the study were to determine the performance of QS students in Building construction and construction Measurement Courses; and to determine whether a relationship exist in the performances of QS students in the two subject areas. Purposive sampling technique was used to select Federal Polytechnic Ede, Osun State for the study. Random sampling technique was used to select 241 students who provide data for the study. Close ended questionnaire was used to collect data for the study and data was analyzed using frequency, percentile and correlation analysis. Finding indicates that 43% of the respondents on the average put up good performances in Building Construction Courses while only 19% of the respondents on the average had good grades in Construction Measurement Courses. Results also showed that a significant relationship exist between the performance of QS students in Building Construction and Construction Measurement courses as 83.3% (five out of six pair courses shows significant positive linear correlation. The study recommends that a quick curriculum re-adjustment should be initiated so as to enhance improved academic performance by QS Students especially in Construction Measurement courses.

  10. THE HETDEX PILOT SURVEY. I. SURVEY DESIGN, PERFORMANCE, AND CATALOG OF EMISSION-LINE GALAXIES

    International Nuclear Information System (INIS)

    Adams, Joshua J.; Blanc, Guillermo A.; Gebhardt, Karl; Hao, Lei; Byun, Joyce; Fry, Alex; Jeong, Donghui; Komatsu, Eiichiro; Hill, Gary J.; Cornell, Mark E.; MacQueen, Phillip J.; Drory, Niv; Bender, Ralf; Hopp, Ulrich; Kelzenberg, Ralf; Ciardullo, Robin; Gronwall, Caryl; Finkelstein, Steven L.; Gawiser, Eric; Kelz, Andreas

    2011-01-01

    We present a catalog of emission-line galaxies selected solely by their emission-line fluxes using a wide-field integral field spectrograph. This work is partially motivated as a pilot survey for the upcoming Hobby-Eberly Telescope Dark Energy Experiment. We describe the observations, reductions, detections, redshift classifications, line fluxes, and counterpart information for 397 emission-line galaxies detected over 169 □' with a 3500-5800 A bandpass under 5 A full-width-half-maximum (FWHM) spectral resolution. The survey's best sensitivity for unresolved objects under photometric conditions is between 4 and 20x 10 -17 erg s -1 cm -2 depending on the wavelength, and Lyα luminosities between 3 x 10 42 and 6 x 10 42 erg s -1 are detectable. This survey method complements narrowband and color-selection techniques in the search of high-redshift galaxies with its different selection properties and large volume probed. The four survey fields within the COSMOS, GOODS-N, MUNICS, and XMM-LSS areas are rich with existing, complementary data. We find 105 galaxies via their high-redshift Lyα emission at 1.9 44 □' which appear to be extended Lyα nebulae. We also find three high-z objects with rest-frame Lyα EW above the level believed to be achievable with normal star formation, EW 0 >240 A. Future papers will investigate the physical properties of this sample.

  11. Spatial pattern corrections and sample sizes for forest density estimates of historical tree surveys

    Science.gov (United States)

    Brice B. Hanberry; Shawn Fraver; Hong S. He; Jian Yang; Dan C. Dey; Brian J. Palik

    2011-01-01

    The U.S. General Land Office land surveys document trees present during European settlement. However, use of these surveys for calculating historical forest density and other derived metrics is limited by uncertainty about the performance of plotless density estimators under a range of conditions. Therefore, we tested two plotless density estimators, developed by...

  12. Performance Analysis of Low-Cost Single-Frequency GPS Receivers in Hydrographic Surveying

    Science.gov (United States)

    Elsobeiey, M.

    2017-10-01

    The International Hydrographic Organization (IHO) has issued standards that provide the minimum requirements for different types of hydrographic surveys execution to collect data to be used to compile navigational charts. Such standards are usually updated from time to time to reflect new survey techniques and practices and must be achieved to assure both surface navigation safety and marine environment protection. Hydrographic surveys can be classified to four orders namely, special order, order 1a, order 1b, and order 2. The order of hydrographic surveys to use should be determined in accordance with the importance to the safety of navigation in the surveyed area. Typically, geodetic-grade dual-frequency GPS receivers are utilized for position determination during data collection in hydrographic surveys. However, with the evolution of high-sensitivity low-cost single-frequency receivers, it is very important to evaluate the performance of such receivers. This paper investigates the performance of low-cost single-frequency GPS receivers in hydrographic surveying applications. The main objective is to examine whether low-cost single-frequency receivers fulfil the IHO standards for hydrographic surveys. It is shown that the low-cost single-frequency receivers meet the IHO horizontal accuracy for all hydrographic surveys orders at any depth. However, the single-frequency receivers meet only order 2 requirements for vertical accuracy at depth more than or equal 100 m.

  13. Proposal of sampling protocols to verify possible performance objectives for Campylobacter species control in Italian broiler batches

    Directory of Open Access Journals (Sweden)

    Gerardo Manfreda

    2013-04-01

    Full Text Available Campylobacteriosis represents the most important food-borne illness in the EU. Broilers, as well as poultry meat, spread the majority of strains responsible for human cases. The main aims of this study were to suggest an approach for the definition of performance objectives (POs based on prevalence and concentration of Campylobacter species (spp. in broiler carcasses; moreover, sampling plans to determine the acceptability of broiler batches at the slaughterhouses in relation to such POs were formulated. The dataset used in this study was the one regarding Italy composed during the European Food Safety Authority baseline survey which was performed in the EU in 2008. A total of 393 carcasses obtained from 393 different batches collected from 48 Italian slaughterhouses were included in the analysis. Uncertainty in prevalence and concentration of Campylobacter spp. on carcasses was quantified assuming a beta and log normal distribution. Statistical analysis and distribution fitting were performed in ModelRisk v4.3 (Monte Carlo simulation with 10,000 iterations. By taking the 50th percentile of prevalence distribution as safety limit, sampling plans were subsequently calculated basing on the binomial approach. Final values of number of samples were equal to 4 or 5 to test with qualitative analysis. Considering a limit of quantification of 10 colony forming units/g, a higher number of samples (i.e. 10-13 would be necessary to test using enumeration. An increase of the sensibility of the analytical technique should be necessary to achieve realistic and useful sampling plans based on concentration data.

  14. Using mark-recapture distance sampling methods on line transect surveys

    Science.gov (United States)

    Burt, Louise M.; Borchers, David L.; Jenkins, Kurt J.; Marques, Tigao A

    2014-01-01

    Mark–recapture distance sampling (MRDS) methods are widely used for density and abundance estimation when the conventional DS assumption of certain detection at distance zero fails, as they allow detection at distance zero to be estimated and incorporated into the overall probability of detection to better estimate density and abundance. However, incorporating MR data in DS models raises survey and analysis issues not present in conventional DS. Conversely, incorporating DS assumptions in MR models raises issues not present in conventional MR. As a result, being familiar with either conventional DS methods or conventional MR methods does not on its own put practitioners in good a position to apply MRDS methods appropriately. This study explains the sometimes subtly different varieties of MRDS survey methods and the associated concepts underlying MRDS models. This is done as far as possible without giving mathematical details – in the hope that this will make the key concepts underlying the methods accessible to a wider audience than if we were to present the concepts via equations.

  15. A radon survey performed in caves in Slovenia

    International Nuclear Information System (INIS)

    Jovanovic, P.

    2002-01-01

    A survey of radon and radon decay product concentrations in several caves in a limestone region in Slovenia was initiated in 1986. In the period from 1989 to 1998, monthly surveys were undertaken in several caves which are open to tourists or used for speleotherapy purposes. The reason for carrying out these surveys, were dose estimates obtained for the guides and medical staff working in the caves. Daily average radon gas concentration determined ranged from several 100 Bq/m 3 up to 27 kBq/m 3 . Higher values were measured in the summer period. The equilibrium factors derived ranged from 0.05 to 0.89, with the higher values being measured in the winter period in vertical caves. In horizontal caves (with two entrances located opposite one another) these values ranged between 0.55 and 0.89. Annual doses estimated on the basis of various lung models ranged from 10 mSv to 85 mSv per year and per 2000 working hours. A significant difference was observed between the doses estimated by means of dosimetric models, and those estimated on the basis of the epidemiological model presented in ICRP 65. The value for the unattached fraction indicated in ICRP 65 is about 3%, but our measurements performed in the caves yielded higher values of up to 15%, with this highest value being determined in the Postojna cave. In the coming years, we will perform measurements to obtain the values for concentrations of unattached particles of radon daughters and values for particle-size distribution in the 3 different caves with the highest occupancy times for visitors. There are no regulations in force in Slovenia affecting exposures to elevated radon and radon daughter concentrations among underground workers. The health inspectorate can impose radiation monitoring measures for the purposes of performing dose calculations for underground workers. The results from such monitoring measures will contribute to the establishment of an ordinance regulating the performance of measurements at low

  16. The Italian national survey on radon indoors run by several different regional laboratories: Sampling strategy, realization and follow-up

    International Nuclear Information System (INIS)

    Bochicchio, F.; Risica, S.; Piermattei, S.

    1993-01-01

    The paper outlines the criteria and organization adopted by the Italian National Institutions in carrying out a representative national survey to evaluate the distribution of radon concentration and the exposure of the Italian population to natural radiation indoors. The main items of the survey - i.e. sampling design, choice of the sample size (5000 dwellings), organization, analysis of the actual sample structure, questionnaire to collect data about families and their dwellings, experimental set up and communication with the public - are discussed. Some results, concerning a first fraction of the total sample, are also presented. (author). 13 refs, 2 figs, 2 tabs

  17. Mentoring perception and academic performance: an Academic Health Science Centre survey.

    Science.gov (United States)

    Athanasiou, Thanos; Patel, Vanash; Garas, George; Ashrafian, Hutan; Shetty, Kunal; Sevdalis, Nick; Panzarasa, Pietro; Darzi, Ara; Paroutis, Sotirios

    2016-10-01

    To determine the association between professors' self-perception of mentoring skills and their academic performance. Two hundred and fifteen professors from Imperial College London, the first Academic Health Science Centre (AHSC) in the UK, were surveyed. The instrument adopted was the Mentorship Skills Self-Assessment Survey. Statement scores were aggregated to provide a score for each shared core, mentor-specific and mentee-specific skill. Univariate and multivariate regression analyses were used to evaluate their relationship with quantitative measures of academic performance (publications, citations and h-index). There were 104 professors that responded (response rate 48%). There were no statistically significant negative correlations between any mentoring statement and any performance measure. In contrast, several mentoring survey items were positively correlated with academic performance. The total survey score for frequency of application of mentoring skills had a statistically significant positive association with number of publications (B=0.012, SE=0.004, p=0.006), as did the frequency of acquiring mentors with number of citations (B=1.572, SE=0.702, p=0.030). Building trust and managing risks had a statistically significant positive association with h-index (B=0.941, SE=0.460, p=0.047 and B=0.613, SE=0.287, p=0.038, respectively). This study supports the view that mentoring is associated with high academic performance. Importantly, it suggests that frequent use of mentoring skills and quality of mentoring have positive effects on academic performance. Formal mentoring programmes should be considered a fundamental part of all AHSCs' configuration. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  18. Estimating 137Cs ingestion doses to Saamis in Kautokeino (Norway) using whole body counting vs. dietary survey results and food samples

    International Nuclear Information System (INIS)

    Skuterud, L.; Bergan, T.; Mehli, H.

    2002-01-01

    From 1965 to 1990 whole body measurements were carried out on an annual basis. Since then, 3-year cycles have been followed. In most years, the reindeer keepers have provided samples of reindeer meat for radiocaesium analysis. In 1989-1990 and 1999 dietary surveys were performed in conjunction with the whole-body monitoring. Earlier diet information is available from a separate study in 1963. Rough estimates of the radiocaesium intake by the studied population in Kautokeino have indicated that the dietary surveys have overestimated the radiocaesium intake. The aim of the present study was to evaluate the available information from Kautokeino, and to derive some conclusions regarding the reindeer meat consumption by today's reindeer keepers, and what 137 Cs ingestion doses they are exposed to. (LN)

  19. Analysis and radiological assessment of survey results and samples from the beaches around Sellafield

    International Nuclear Information System (INIS)

    Webb, G.A.M.; Fry, F.A.

    1983-12-01

    After radioactive sea debris had been found on beaches near the BNFL, Sellafield, plant, NRPB was asked by the Department of the Environment to analyse some of the samples collected and to assess the radiological hazard to members of the public. A report is presented containing an analysis of survey reports for the period 19 November - 4 December 1983 and preliminary results of the analysis of all samples received, together with the Board's recommendations. (author)

  20. A study on human performance enhancement plan in maintenance field by survey on actual condition of human performance tools - 15035

    International Nuclear Information System (INIS)

    Park, J.; Jeong, H.; Kim, Y.

    2015-01-01

    Human errors in nuclear power plant are one of the important factors that may cause reactor trip. Most operating companies of nuclear power plants manage human factor systematically through tools like HPES (Human Performance Enhancement), PSR (Periodic Safety Review), OE (Operating Experience), human performance tools, safety culture assessment and CAP (Corrective Action Program). But human factors are managed passively in maintenance field, because maintenance works are carrying out by partner companies. KHNP also contracts the maintenance work to the partner companies, and advise them to use human performance tools. But the actual condition on partner companies has not been surveyed. This paper suggests some plans that can improve human performance by analyzing the opinion of partner company employees about the causes and solutions of human errors, by analyzing utilization of human performance tools and by comparing the results of the partner companies survey with the results of the operating company survey. The survey is conducted to 3 partner companies by similar contents and categories in order to compare partner company with operating company, and the main analysis fields are the following: -1) Level of understanding and utilization of the human performance tools, -2) Difficulties of applying the human performance tools, -3) Level of employee's training (or education) in the use of the human performance tools, and -4) Root causes of human errors and countermeasures. (authors)

  1. An international comparison of the Ohio department of aging-resident satisfaction survey: applicability in a U.S. and Canadian sample.

    Science.gov (United States)

    Cooke, Heather A; Yamashita, Takashi; Brown, J Scott; Straker, Jane K; Baiton Wilkinson, Susan

    2013-12-01

    The majority of resident satisfaction surveys available for use in assisted living settings have been developed in the United States; however, empirical assessment of their measurement properties remains limited and sporadic, as does knowledge regarding their applicability for use in settings outside of the United States. This study further examines the psychometric properties of the Ohio Department of Aging-Resident Satisfaction Survey (ODA-RSS) and explores its applicability within a sample of Canadian assisted living facilities. Data were collected from 9,739 residential care facility (RCF) residents in Ohio, United States and 938 assisted-living residents in British Columbia, Canada. Confirmatory factor analysis was used to assess the instrument's psychometric properties within the 2 samples. Although the ODA-RSS appears well suited for assessing resident satisfaction in Ohio RCFs, it is less so in British Columbia assisted living settings. Adequate reliability and validity were observed for all 8 measurable instrument domains in the Ohio sample, but only 4 (Care and Services, Employee Relations, Employee Responsiveness, and Communications) in the British Columbia sample. The ODA-RSS performs best in an environment that encompasses a wide range of RCF types. In settings where greater uniformity and standardization exist, more nuanced questions may be required to detect variation between facilities. It is not sufficient to assume that rigorous development and empirical testing of a tool ensures its applicability in states or countries other than that in which it was initially developed.

  2. Trypanosoma brucei gambiense trypanosomiasis in Terego county, northern Uganda, 1996: a lot quality assurance sampling survey.

    Science.gov (United States)

    Hutin, Yvan J F; Legros, Dominique; Owini, Vincent; Brown, Vincent; Lee, Evan; Mbulamberi, Dawson; Paquet, Christophe

    2004-04-01

    We estimated the pre-intervention prevalence of Trypanosoma brucei gambiense (Tbg) trypanosomiasis using the lot quality assurance sampling (LQAS) methods in 14 parishes of Terego County in northern Uganda. A total of 826 participants were included in the survey sample in 1996. The prevalence of laboratory confirmed Tbg trypanosomiasis adjusted for parish population sizes was 2.2% (95% confidence interval =1.1-3.2). This estimate was consistent with the 1.1% period prevalence calculated on the basis of cases identified through passive and active screening in 1996-1999. Ranking of parishes in four categories according to LQAS analysis of the 1996 survey predicted the prevalences observed during the first round of active screening in the population in 1997-1998 (P LQAS were validated by the results of the population screening, suggesting that these survey methods may be useful in the pre-intervention phase of sleeping sickness control programs.

  3. Tobacco smoking surveillance: is quota sampling an efficient tool for monitoring national trends? A comparison with a random cross-sectional survey.

    Directory of Open Access Journals (Sweden)

    Romain Guignard

    Full Text Available OBJECTIVES: It is crucial for policy makers to monitor the evolution of tobacco smoking prevalence. In France, this monitoring is based on a series of cross-sectional general population surveys, the Health Barometers, conducted every five years and based on random samples. A methodological study has been carried out to assess the reliability of a monitoring system based on regular quota sampling surveys for smoking prevalence. DESIGN / OUTCOME MEASURES: In 2010, current and daily tobacco smoking prevalences obtained in a quota survey on 8,018 people were compared with those of the 2010 Health Barometer carried out on 27,653 people. Prevalences were assessed separately according to the telephone equipment of the interviewee (landline phone owner vs "mobile-only", and logistic regressions were conducted in the pooled database to assess the impact of the telephone equipment and of the survey mode on the prevalences found. Finally, logistic regressions adjusted for sociodemographic characteristics were conducted in the random sample in order to determine the impact of the needed number of calls to interwiew "hard-to-reach" people on the prevalence found. RESULTS: Current and daily prevalences were higher in the random sample (respectively 33.9% and 27.5% in 15-75 years-old than in the quota sample (respectively 30.2% and 25.3%. In both surveys, current and daily prevalences were lower among landline phone owners (respectively 31.8% and 25.5% in the random sample and 28.9% and 24.0% in the quota survey. The required number of calls was slightly related to the smoking status after adjustment for sociodemographic characteristics. CONCLUSION: Random sampling appears to be more effective than quota sampling, mainly by making it possible to interview hard-to-reach populations.

  4. The Swift Gamma-Ray Burst Host Galaxy Legacy Survey. I. Sample Selection and Redshift Distribution

    Science.gov (United States)

    Perley, D. A.; Kruhler, T.; Schulze, S.; Postigo, A. De Ugarte; Hjorth, J.; Berger, E.; Cenko, S. B.; Chary, R.; Cucchiara, A.; Ellis, R.; hide

    2016-01-01

    We introduce the Swift Gamma-Ray Burst Host Galaxy Legacy Survey (SHOALS), a multi-observatory high redshift galaxy survey targeting the largest unbiased sample of long-duration gamma-ray burst (GRB) hosts yet assembled (119 in total). We describe the motivations of the survey and the development of our selection criteria, including an assessment of the impact of various observability metrics on the success rate of afterglow-based redshift measurement. We briefly outline our host galaxy observational program, consisting of deep Spitzer/IRAC imaging of every field supplemented by similarly deep, multicolor optical/near-IR photometry, plus spectroscopy of events without preexisting redshifts. Our optimized selection cuts combined with host galaxy follow-up have so far enabled redshift measurements for 110 targets (92%) and placed upper limits on all but one of the remainder. About 20% of GRBs in the sample are heavily dust obscured, and at most 2% originate from z > 5.5. Using this sample, we estimate the redshift-dependent GRB rate density, showing it to peak at z approx. 2.5 and fall by at least an order of magnitude toward low (z = 0) redshift, while declining more gradually toward high (z approx. 7) redshift. This behavior is consistent with a progenitor whose formation efficiency varies modestly over cosmic history. Our survey will permit the most detailed examination to date of the connection between the GRB host population and general star-forming galaxies, directly measure evolution in the host population over cosmic time and discern its causes, and provide new constraints on the fraction of cosmic star formation occurring in undetectable galaxies at all redshifts.

  5. Performance evaluation soil samples utilizing encapsulation technology

    Science.gov (United States)

    Dahlgran, James R.

    1999-01-01

    Performance evaluation soil samples and method of their preparation using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

  6. Comparing two survey methods of measuring health-related indicators: Lot Quality Assurance Sampling and Demographic Health Surveys.

    Science.gov (United States)

    Anoke, Sarah C; Mwai, Paul; Jeffery, Caroline; Valadez, Joseph J; Pagano, Marcello

    2015-12-01

    Two common methods used to measure indicators for health programme monitoring and evaluation are the demographic and health surveys (DHS) and lot quality assurance sampling (LQAS); each one has different strengths. We report on both methods when utilised in comparable situations. We compared 24 indicators in south-west Uganda, where data for prevalence estimations were collected independently for the two methods in 2011 (LQAS: n = 8876; DHS: n = 1200). Data were stratified (e.g. gender and age) resulting in 37 comparisons. We used a two-sample two-sided Z-test of proportions to compare both methods. The average difference between LQAS and DHS for 37 estimates was 0.062 (SD = 0.093; median = 0.039). The average difference among the 21 failures to reject equality of proportions was 0.010 (SD = 0.041; median = 0.009); among the 16 rejections, it was 0.130 (SD = 0.010, median = 0.118). Seven of the 16 rejections exhibited absolute differences of 0.10 and 0.20 (mean = 0.261, SD = 0.083). There is 75.7% agreement across the two surveys. Both methods yield regional results, but only LQAS provides information at less granular levels (e.g. the district level) where managerial action is taken. The cost advantage and localisation make LQAS feasible to conduct more frequently, and provides the possibility for real-time health outcomes monitoring. © 2015 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

  7. Sampling Efficiency and Performance of Selected Thoracic Aerosol Samplers.

    Science.gov (United States)

    Görner, Peter; Simon, Xavier; Boivin, Alexis; Bau, Sébastien

    2017-08-01

    Measurement of worker exposure to a thoracic health-related aerosol fraction is necessary in a number of occupational situations. This is the case of workplaces with atmospheres polluted by fibrous particles, such as cotton dust or asbestos, and by particles inducing irritation or bronchoconstriction such as acid mists or flour dust. Three personal and two static thoracic aerosol samplers were tested under laboratory conditions. Sampling efficiency with respect to particle aerodynamic diameter was measured in a horizontal low wind tunnel and in a vertical calm air chamber. Sampling performance was evaluated against conventional thoracic penetration. Three of the tested samplers performed well, when sampling the thoracic aerosol at nominal flow rate and two others performed well at optimized flow rate. The limit of flow rate optimization was found when using cyclone samplers. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  8. Extending cluster lot quality assurance sampling designs for surveillance programs.

    Science.gov (United States)

    Hund, Lauren; Pagano, Marcello

    2014-07-20

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

  9. Sampling in epidemiological research: issues, hazards and pitfalls

    Science.gov (United States)

    Tyrer, Stephen; Heyman, Bob

    2016-01-01

    Surveys of people's opinions are fraught with difficulties. It is easier to obtain information from those who respond to text messages or to emails than to attempt to obtain a representative sample. Samples of the population that are selected non-randomly in this way are termed convenience samples as they are easy to recruit. This introduces a sampling bias. Such non-probability samples have merit in many situations, but an epidemiological enquiry is of little value unless a random sample is obtained. If a sufficient number of those selected actually complete a survey, the results are likely to be representative of the population. This editorial describes probability and non-probability sampling methods and illustrates the difficulties and suggested solutions in performing accurate epidemiological research. PMID:27087985

  10. Effect of sample size on bias correction performance

    Science.gov (United States)

    Reiter, Philipp; Gutjahr, Oliver; Schefczyk, Lukas; Heinemann, Günther; Casper, Markus C.

    2014-05-01

    The output of climate models often shows a bias when compared to observed data, so that a preprocessing is necessary before using it as climate forcing in impact modeling (e.g. hydrology, species distribution). A common bias correction method is the quantile matching approach, which adapts the cumulative distribution function of the model output to the one of the observed data by means of a transfer function. Especially for precipitation we expect the bias correction performance to strongly depend on sample size, i.e. the length of the period used for calibration of the transfer function. We carry out experiments using the precipitation output of ten regional climate model (RCM) hindcast runs from the EU-ENSEMBLES project and the E-OBS observational dataset for the period 1961 to 2000. The 40 years are split into a 30 year calibration period and a 10 year validation period. In the first step, for each RCM transfer functions are set up cell-by-cell, using the complete 30 year calibration period. The derived transfer functions are applied to the validation period of the respective RCM precipitation output and the mean absolute errors in reference to the observational dataset are calculated. These values are treated as "best fit" for the respective RCM. In the next step, this procedure is redone using subperiods out of the 30 year calibration period. The lengths of these subperiods are reduced from 29 years down to a minimum of 1 year, only considering subperiods of consecutive years. This leads to an increasing number of repetitions for smaller sample sizes (e.g. 2 for a length of 29 years). In the last step, the mean absolute errors are statistically tested against the "best fit" of the respective RCM to compare the performances. In order to analyze if the intensity of the effect of sample size depends on the chosen correction method, four variations of the quantile matching approach (PTF, QUANT/eQM, gQM, GQM) are applied in this study. The experiments are further

  11. Gathering Opinions on Depression Information Needs and Preferences: Samples and Opinions in Clinic Versus Web-Based Surveys.

    Science.gov (United States)

    Bernstein, Matthew T; Walker, John R; Sexton, Kathryn A; Katz, Alan; Beatie, Brooke E

    2017-04-24

    There has been limited research on the information needs and preferences of the public concerning treatment for depression. Very little research is available comparing samples and opinions when recruitment for surveys is done over the Web as opposed to a personal invitation to complete a paper survey. This study aimed to (1) to explore information needs and preferences among members of the public and (2) compare Clinic and Web samples on sample characteristics and survey findings. Web survey participants were recruited with a notice on three self-help association websites (N=280). Clinic survey participants were recruited by a research assistant in the waiting rooms of a family medicine clinic and a walk-in medical clinic (N=238) and completed a paper version of the survey. The Clinic and Web samples were similar in age (39.0 years, SD 13.9 vs 40.2 years, SD 12.5, respectively), education, and proportion in full time employment. The Clinic sample was more diverse in demographic characteristics and closer to the demographic characteristics of the region (Winnipeg, Canada) with a higher proportion of males (102/238 [42.9%] vs 45/280 [16.1%]) and nonwhites (Aboriginal, Asian, and black) (69/238 [29.0%] vs 39/280 [13.9%]). The Web sample reported a higher level of emotional distress and had more previous psychological (224/280 [80.0%] vs 83/238 [34.9%]) and pharmacological (202/280 [72.1%] vs 57/238 [23.9%]) treatment. In terms of opinions, most respondents in both settings saw information on a wide range of topics around depression treatment as very important including information about treatment choices, effectiveness of treatment, how long it takes treatment to work, how long treatment continues, what happens when treatment stops, advantages and disadvantages of treatments, and potential side effects. Females, respondents with a white background, and those who had received or felt they would have benefited from therapy in the past saw more information topics as very

  12. A Survey for Spectroscopic Binaries in a Large Sample of G Dwarfs

    Science.gov (United States)

    Udry, S.; Mayor, M.; Latham, D. W.; Stefanik, R. P.; Torres, G.; Mazeh, T.; Goldberg, D.; Andersen, J.; Nordstrom, B.

    For more than 5 years now, the radial velocities for a large sample of G dwarfs (3,347 stars) have been monitored in order to obtain an unequaled set of orbital parameters for solar-type stars (~400 orbits, up to now). This survey provides a considerable improvement on the classical systematic study by Duquennoy and Mayor (1991; DM91). The observational part of the survey has been carried out in the context of a collaboration between the Geneva Observatory on the two coravel spectrometers for the southern sky and CfA at Oakridge and Whipple Observatories for the northern sky. As a first glance at these new results, we will address in this contribution a special aspect of the orbital eccentricity distribution, namely the disappearance of the void observed in DM91 for quasi-circular orbits with periods larger than 10 days.

  13. Performance of an active well coincidence counter for HEU samples

    International Nuclear Information System (INIS)

    Ferrari, Francesca; Peerani, Paolo

    2010-01-01

    Neutron coincidence counting is the reference NDA technique used in nuclear safeguards to measure the mass of nuclear material in samples. For high-enriched uranium (HEU) samples active neutron interrogation is generally performed and the most common device used by nuclear inspectors is the Active Well Coincidence Counter (AWCC). Within her master thesis at the Polytechnic of Milan, the first author performed an intensive study on the characteristics and performances of the AWCC in order to assess the 235 U mass in HEU oxide samples at the PERLA laboratory of JRC. The work has been summarised in this paper that starts with the optimisation of the use of AWCC for nuclear safeguards, describing the calibration procedure, reporting results of a series of verification measurements, summarising the performances that can be obtained with this instruments during inspections at fuel production plants and concluding with the discussion of uncertainties related to these measurements.

  14. THE SLOAN DIGITAL SKY SURVEY QUASAR LENS SEARCH. IV. STATISTICAL LENS SAMPLE FROM THE FIFTH DATA RELEASE

    International Nuclear Information System (INIS)

    Inada, Naohisa; Oguri, Masamune; Shin, Min-Su; Kayo, Issha; Fukugita, Masataka; Strauss, Michael A.; Gott, J. Richard; Hennawi, Joseph F.; Morokuma, Tomoki; Becker, Robert H.; Gregg, Michael D.; White, Richard L.; Kochanek, Christopher S.; Chiu, Kuenley; Johnston, David E.; Clocchiatti, Alejandro; Richards, Gordon T.; Schneider, Donald P.; Frieman, Joshua A.

    2010-01-01

    We present the second report of our systematic search for strongly lensed quasars from the data of the Sloan Digital Sky Survey (SDSS). From extensive follow-up observations of 136 candidate objects, we find 36 lenses in the full sample of 77,429 spectroscopically confirmed quasars in the SDSS Data Release 5. We then define a complete sample of 19 lenses, including 11 from our previous search in the SDSS Data Release 3, from the sample of 36,287 quasars with i Λ = 0.84 +0.06 -0.08 (stat.) +0.09 -0.07 (syst.) assuming a flat universe, which is in good agreement with other cosmological observations. We also report the discoveries of seven binary quasars with separations ranging from 1.''1 to 16.''6, which are identified in the course of our lens survey. This study concludes the construction of our statistical lens sample in the full SDSS-I data set.

  15. Evaluation of Respondent-Driven Sampling

    Science.gov (United States)

    McCreesh, Nicky; Frost, Simon; Seeley, Janet; Katongole, Joseph; Tarsh, Matilda Ndagire; Ndunguse, Richard; Jichi, Fatima; Lunel, Natasha L; Maher, Dermot; Johnston, Lisa G; Sonnenberg, Pam; Copas, Andrew J; Hayes, Richard J; White, Richard G

    2012-01-01

    Background Respondent-driven sampling is a novel variant of link-tracing sampling for estimating the characteristics of hard-to-reach groups, such as HIV prevalence in sex-workers. Despite its use by leading health organizations, the performance of this method in realistic situations is still largely unknown. We evaluated respondent-driven sampling by comparing estimates from a respondent-driven sampling survey with total-population data. Methods Total-population data on age, tribe, religion, socioeconomic status, sexual activity and HIV status were available on a population of 2402 male household-heads from an open cohort in rural Uganda. A respondent-driven sampling (RDS) survey was carried out in this population, employing current methods of sampling (RDS sample) and statistical inference (RDS estimates). Analyses were carried out for the full RDS sample and then repeated for the first 250 recruits (small sample). Results We recruited 927 household-heads. Full and small RDS samples were largely representative of the total population, but both samples under-represented men who were younger, of higher socioeconomic status, and with unknown sexual activity and HIV status. Respondent-driven-sampling statistical-inference methods failed to reduce these biases. Only 31%-37% (depending on method and sample size) of RDS estimates were closer to the true population proportions than the RDS sample proportions. Only 50%-74% of respondent-driven-sampling bootstrap 95% confidence intervals included the population proportion. Conclusions Respondent-driven sampling produced a generally representative sample of this well-connected non-hidden population. However, current respondent-driven-sampling inference methods failed to reduce bias when it occurred. Whether the data required to remove bias and measure precision can be collected in a respondent-driven sampling survey is unresolved. Respondent-driven sampling should be regarded as a (potentially superior) form of convenience-sampling

  16. Evaluation of respondent-driven sampling.

    Science.gov (United States)

    McCreesh, Nicky; Frost, Simon D W; Seeley, Janet; Katongole, Joseph; Tarsh, Matilda N; Ndunguse, Richard; Jichi, Fatima; Lunel, Natasha L; Maher, Dermot; Johnston, Lisa G; Sonnenberg, Pam; Copas, Andrew J; Hayes, Richard J; White, Richard G

    2012-01-01

    Respondent-driven sampling is a novel variant of link-tracing sampling for estimating the characteristics of hard-to-reach groups, such as HIV prevalence in sex workers. Despite its use by leading health organizations, the performance of this method in realistic situations is still largely unknown. We evaluated respondent-driven sampling by comparing estimates from a respondent-driven sampling survey with total population data. Total population data on age, tribe, religion, socioeconomic status, sexual activity, and HIV status were available on a population of 2402 male household heads from an open cohort in rural Uganda. A respondent-driven sampling (RDS) survey was carried out in this population, using current methods of sampling (RDS sample) and statistical inference (RDS estimates). Analyses were carried out for the full RDS sample and then repeated for the first 250 recruits (small sample). We recruited 927 household heads. Full and small RDS samples were largely representative of the total population, but both samples underrepresented men who were younger, of higher socioeconomic status, and with unknown sexual activity and HIV status. Respondent-driven sampling statistical inference methods failed to reduce these biases. Only 31%-37% (depending on method and sample size) of RDS estimates were closer to the true population proportions than the RDS sample proportions. Only 50%-74% of respondent-driven sampling bootstrap 95% confidence intervals included the population proportion. Respondent-driven sampling produced a generally representative sample of this well-connected nonhidden population. However, current respondent-driven sampling inference methods failed to reduce bias when it occurred. Whether the data required to remove bias and measure precision can be collected in a respondent-driven sampling survey is unresolved. Respondent-driven sampling should be regarded as a (potentially superior) form of convenience sampling method, and caution is required

  17. Multiple surveys employing a new sample-processing protocol reveal the genetic diversity of placozoans in Japan.

    Science.gov (United States)

    Miyazawa, Hideyuki; Nakano, Hiroaki

    2018-03-01

    Placozoans, flat free-living marine invertebrates, possess an extremely simple bauplan lacking neurons and muscle cells and represent one of the earliest-branching metazoan phyla. They are widely distributed from temperate to tropical oceans. Based on mitochondrial 16S rRNA sequences, 19 haplotypes forming seven distinct clades have been reported in placozoans to date. In Japan, placozoans have been found at nine locations, but 16S genotyping has been performed at only two of these locations. Here, we propose a new processing protocol, "ethanol-treated substrate sampling," for collecting placozoans from natural environments. We also report the collection of placozoans from three new locations, the islands of Shikine-jima, Chichi-jima, and Haha-jima, and we present the distribution of the 16S haplotypes of placozoans in Japan. Multiple surveys conducted at multiple locations yielded five haplotypes that were not reported previously, revealing high genetic diversity in Japan, especially at Shimoda and Shikine-jima Island. The observed geographic distribution patterns were different among haplotypes; some were widely distributed, while others were sampled only from a single location. However, samplings conducted on different dates at the same sites yielded different haplotypes, suggesting that placozoans of a given haplotype do not inhabit the same site constantly throughout the year. Continued sampling efforts conducted during all seasons at multiple locations worldwide and the development of molecular markers within the haplotypes are needed to reveal the geographic distribution pattern and dispersal history of placozoans in greater detail.

  18. Optimum strata boundaries and sample sizes in health surveys using auxiliary variables.

    Science.gov (United States)

    Reddy, Karuna Garan; Khan, Mohammad G M; Khan, Sabiha

    2018-01-01

    Using convenient stratification criteria such as geographical regions or other natural conditions like age, gender, etc., is not beneficial in order to maximize the precision of the estimates of variables of interest. Thus, one has to look for an efficient stratification design to divide the whole population into homogeneous strata that achieves higher precision in the estimation. In this paper, a procedure for determining Optimum Stratum Boundaries (OSB) and Optimum Sample Sizes (OSS) for each stratum of a variable of interest in health surveys is developed. The determination of OSB and OSS based on the study variable is not feasible in practice since the study variable is not available prior to the survey. Since many variables in health surveys are generally skewed, the proposed technique considers the readily-available auxiliary variables to determine the OSB and OSS. This stratification problem is formulated into a Mathematical Programming Problem (MPP) that seeks minimization of the variance of the estimated population parameter under Neyman allocation. It is then solved for the OSB by using a dynamic programming (DP) technique. A numerical example with a real data set of a population, aiming to estimate the Haemoglobin content in women in a national Iron Deficiency Anaemia survey, is presented to illustrate the procedure developed in this paper. Upon comparisons with other methods available in literature, results reveal that the proposed approach yields a substantial gain in efficiency over the other methods. A simulation study also reveals similar results.

  19. 75 FR 57263 - New Policy Announcing That Traditional Horizontal Survey Projects Performed With Terrestrial...

    Science.gov (United States)

    2010-09-20

    ... Traditional Horizontal Survey Projects Performed With Terrestrial Survey Techniques Will No Longer Be Accepted... for additional information should be directed to Mr. Mark Eckl, Observation and Analysis Division... horizontal surveys requires use of resources that are limited and will be used more appropriately elsewhere...

  20. Men who have sex with men in Great Britain: comparing methods and estimates from probability and convenience sample surveys

    OpenAIRE

    Prah, Philip; Hickson, Ford; Bonell, Chris; McDaid, Lisa M; Johnson, Anne M; Wayal, Sonali; Clifton, Soazig; Sonnenberg, Pam; Nardone, Anthony; Erens, Bob; Copas, Andrew J; Riddell, Julie; Weatherburn, Peter; Mercer, Catherine H

    2016-01-01

    Objective: To examine sociodemographic and behavioural differences between men whohave sex with men (MSM) participating in recent UK convenience surveys and a national probability sample survey.\\ud Methods: We compared 148 MSM aged 18–64 years interviewed for Britain's third National Survey of Sexual Attitudes and Lifestyles (Natsal-3) undertaken in 2010–2012, with men inthe same age range participating in contemporaneous convenience surveys of MSM: 15 500 British resident men in the European...

  1. Quarry Haul Road Ecological Survey

    International Nuclear Information System (INIS)

    1992-09-01

    This biological survey was performed to document the summer flora and fauna found along the haul road constructed as part of the remedial action for the quarry bulk waste. State and Federal species listed as threatened or endangered were noted if encountered while surveying. Sampling locations were equally spaced along the quarry haul road, and a survey for vegetation and birds conducted at each location. Bird observations were conducted as breeding bird surveys once in June of 1991, and again in June of 1992. Each year's survey includes two observations in the early morning and one late in the evening. Vegetation surveys were conducted in 1991 using quadrants and transects. mammal, reptile, and amphibian sightings were noted as encountered

  2. The Lyα reference sample. I. Survey outline and first results for Markarian 259

    International Nuclear Information System (INIS)

    Östlin, Göran; Hayes, Matthew; Duval, Florent; Sandberg, Andreas; Rivera-Thorsen, Thøger; Marquart, Thomas; Adamo, Angela; Melinder, Jens; Guaita, Lucia; Micheva, Genoveva; Orlitová, Ivana; Atek, Hakim; Cannon, John M.; Pardy, Stephen A.; Gruyters, Pieter; Herenz, Edmund Christian; Kunth, Daniel; Laursen, Peter; Mas-Hesse, J. Miguel; Otí-Floranes, Héctor

    2014-01-01

    The Lyα Reference Sample (LARS) is a substantial program with the Hubble Space Telescope (HST) that provides a sample of local universe laboratory galaxies in which to study the detailed astrophysics of the visibility and strength of the Lyαline of neutral hydrogen. Lyα is the dominant spectral line in use for characterizing high-redshift (z) galaxies. This paper presents an overview of the survey, its selection function, and HST imaging observations. The sample was selected from the combined GALEX+Sloan Digital Sky Survey catalog at z = 0.028-0.19, in order to allow Lyα to be captured with combinations of long-pass filters in the Solar Blind Channel (SBC) of the Advanced Camera for Surveys (ACS) onboard HST. In addition, LARS utilizes Hα and Hβ narrowband and u, b, i broadband imaging with ACS and the Wide Field Camera 3 (WFC3). In order to study galaxies in which large numbers of Lyα photons are produced (whether or not they escape), we demanded an Hα equivalent width W(Hα) ≥100 Å. The final sample of 14 galaxies covers far-UV (FUV, λ ∼ 1500 Å) luminosities that overlap with those of high-z Lyα emitters (LAEs) and Lyman break galaxies (LBGs), making LARS a valid comparison sample. We present the reduction steps used to obtain the Lyα images, including our LARS eXtraction software (LaXs), which utilizes pixel-by-pixel spectral synthesis fitting of the energy distribution to determine and subtract the continuum at Lyα. We demonstrate that the use of SBC long-pass-filter combinations increase the signal-to-noise ratio by an order of magnitude compared to the nominal Lyα filter available in SBC. To exemplify the science potential of LARS, we also present some first results for a single galaxy, Mrk 259 (LARS #1). This irregular galaxy shows bright and extended (indicative of resonance scattering) but strongly asymmetric Lyα emission. Spectroscopy from the Cosmic Origins Spectrograph on board HST centered on the brightest UV knot shows a moderate

  3. The Lyα reference sample. I. Survey outline and first results for Markarian 259

    Energy Technology Data Exchange (ETDEWEB)

    Östlin, Göran; Hayes, Matthew; Duval, Florent; Sandberg, Andreas; Rivera-Thorsen, Thøger; Marquart, Thomas; Adamo, Angela; Melinder, Jens; Guaita, Lucia; Micheva, Genoveva [Department of Astronomy, Stockholm University, Oscar Klein Centre, AlbaNova, Stockholm SE-106 91 (Sweden); Orlitová, Ivana [Observatoire de Genève, Université de Genève, Chemin des Maillettes 51, 1290 Versoix (Switzerland); Atek, Hakim [Laboratoire d' Astrophysique, Ecole Polytechnique Fédérale de Lausanne, Observatoire de Sauverny, CH-1290 Versoix (Switzerland); Cannon, John M.; Pardy, Stephen A. [Department of Physics and Astronomy, Macalester College, 1600 Grand Avenue, Saint Paul, MN 55105 (United States); Gruyters, Pieter [Department of Physics and Astronomy, Division of Astronomy and Space Physics, Uppsala University, Box 516, 75120 Uppsala (Sweden); Herenz, Edmund Christian [Leibniz-Institute for Astrophysics Potsdam (AIP), innoFSPEC, An der Sternwarte 16, D-14482 Potsdam (Germany); Kunth, Daniel [Institut d' Astrophysique Paris, 98bis Bd Arago, F-75014 Paris (France); Laursen, Peter [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, DK-2100 Copenhagen (Denmark); Mas-Hesse, J. Miguel [Centro de Astrobiologa (CSIC-INTA), Departamento de Astrofsica, POB 78, E-28691, Villanueva de la Cañada (Spain); Otí-Floranes, Héctor [Instituto de Astronoma, Universidad Nacional Autnoma de Mxico, Apdo. Postal 106, Ensenada B. C. 22800 (Mexico); and others

    2014-12-10

    The Lyα Reference Sample (LARS) is a substantial program with the Hubble Space Telescope (HST) that provides a sample of local universe laboratory galaxies in which to study the detailed astrophysics of the visibility and strength of the Lyαline of neutral hydrogen. Lyα is the dominant spectral line in use for characterizing high-redshift (z) galaxies. This paper presents an overview of the survey, its selection function, and HST imaging observations. The sample was selected from the combined GALEX+Sloan Digital Sky Survey catalog at z = 0.028-0.19, in order to allow Lyα to be captured with combinations of long-pass filters in the Solar Blind Channel (SBC) of the Advanced Camera for Surveys (ACS) onboard HST. In addition, LARS utilizes Hα and Hβ narrowband and u, b, i broadband imaging with ACS and the Wide Field Camera 3 (WFC3). In order to study galaxies in which large numbers of Lyα photons are produced (whether or not they escape), we demanded an Hα equivalent width W(Hα) ≥100 Å. The final sample of 14 galaxies covers far-UV (FUV, λ ∼ 1500 Å) luminosities that overlap with those of high-z Lyα emitters (LAEs) and Lyman break galaxies (LBGs), making LARS a valid comparison sample. We present the reduction steps used to obtain the Lyα images, including our LARS eXtraction software (LaXs), which utilizes pixel-by-pixel spectral synthesis fitting of the energy distribution to determine and subtract the continuum at Lyα. We demonstrate that the use of SBC long-pass-filter combinations increase the signal-to-noise ratio by an order of magnitude compared to the nominal Lyα filter available in SBC. To exemplify the science potential of LARS, we also present some first results for a single galaxy, Mrk 259 (LARS #1). This irregular galaxy shows bright and extended (indicative of resonance scattering) but strongly asymmetric Lyα emission. Spectroscopy from the Cosmic Origins Spectrograph on board HST centered on the brightest UV knot shows a moderate

  4. An automated radiological survey method for performing site remediation and decommissioning

    International Nuclear Information System (INIS)

    Handy, R.G.; Bolch, W.E.; Harder, G.F.; Tolaymat, T.M.

    1994-01-01

    A portable, computer-based method of performing environmental monitoring and assessment for site remediation and decommissioning has been developed. The integrated system has been developed to provide for survey time reductions and real-time data analysis. The technique utilizes a notebook 486 computer with the necessary hardware and software components that makes it possible to be used in an almost unlimited number of environmental monitoring and assessment scenarios. The results from a pilot, open-quotes hide-and-seekclose quotes gamma survey and an actual alpha decontamination survey were elucidated. It was found that a open-quotes hide-and-seekclose quotes survey could come up with timely and accurate conclusions about the position of the source. The use of the automated system in a Th-232 alpha survey resulted in a reduction in the standard time necessary to do a radiological survey. In addition, the ability to analyze the data on-site allowed for identification and location of areas which needed further decontamination. Finally, a discussion on possible future improvements and field conclusions was made

  5. Creel survey sampling designs for estimating effort in short-duration Chinook salmon fisheries

    Science.gov (United States)

    McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

    2013-01-01

    Chinook Salmon Oncorhynchus tshawytscha sport fisheries in the Columbia River basin are commonly monitored using roving creel survey designs and require precise, unbiased catch estimates. The objective of this study was to examine the relative bias and precision of total catch estimates using various sampling designs to estimate angling effort under the assumption that mean catch rate was known. We obtained information on angling populations based on direct visual observations of portions of Chinook Salmon fisheries in three Idaho river systems over a 23-d period. Based on the angling population, Monte Carlo simulations were used to evaluate the properties of effort and catch estimates for each sampling design. All sampling designs evaluated were relatively unbiased. Systematic random sampling (SYS) resulted in the most precise estimates. The SYS and simple random sampling designs had mean square error (MSE) estimates that were generally half of those observed with cluster sampling designs. The SYS design was more efficient (i.e., higher accuracy per unit cost) than a two-cluster design. Increasing the number of clusters available for sampling within a day decreased the MSE of estimates of daily angling effort, but the MSE of total catch estimates was variable depending on the fishery. The results of our simulations provide guidelines on the relative influence of sample sizes and sampling designs on parameters of interest in short-duration Chinook Salmon fisheries.

  6. ACS sampling system: design, implementation, and performance evaluation

    Science.gov (United States)

    Di Marcantonio, Paolo; Cirami, Roberto; Chiozzi, Gianluca

    2004-09-01

    By means of ACS (ALMA Common Software) framework we designed and implemented a sampling system which allows sampling of every Characteristic Component Property with a specific, user-defined, sustained frequency limited only by the hardware. Collected data are sent to various clients (one or more Java plotting widgets, a dedicated GUI or a COTS application) using the ACS/CORBA Notification Channel. The data transport is optimized: samples are cached locally and sent in packets with a lower and user-defined frequency to keep network load under control. Simultaneous sampling of the Properties of different Components is also possible. Together with the design and implementation issues we present the performance of the sampling system evaluated on two different platforms: on a VME based system using VxWorks RTOS (currently adopted by ALMA) and on a PC/104+ embedded platform using Red Hat 9 Linux operating system. The PC/104+ solution offers, as an alternative, a low cost PC compatible hardware environment with free and open operating system.

  7. What Are Probability Surveys used by the National Aquatic Resource Surveys?

    Science.gov (United States)

    The National Aquatic Resource Surveys (NARS) use probability-survey designs to assess the condition of the nation’s waters. In probability surveys (also known as sample-surveys or statistical surveys), sampling sites are selected randomly.

  8. Don't spin the pen: two alternative methods for second-stage sampling in urban cluster surveys

    Directory of Open Access Journals (Sweden)

    Rose Angela MC

    2007-06-01

    Full Text Available Abstract In two-stage cluster surveys, the traditional method used in second-stage sampling (in which the first household in a cluster is selected is time-consuming and may result in biased estimates of the indicator of interest. Firstly, a random direction from the center of the cluster is selected, usually by spinning a pen. The houses along that direction are then counted out to the boundary of the cluster, and one is then selected at random to be the first household surveyed. This process favors households towards the center of the cluster, but it could easily be improved. During a recent meningitis vaccination coverage survey in Maradi, Niger, we compared this method of first household selection to two alternatives in urban zones: 1 using a superimposed grid on the map of the cluster area and randomly selecting an intersection; and 2 drawing the perimeter of the cluster area using a Global Positioning System (GPS and randomly selecting one point within the perimeter. Although we only compared a limited number of clusters using each method, we found the sampling grid method to be the fastest and easiest for field survey teams, although it does require a map of the area. Selecting a random GPS point was also found to be a good method, once adequate training can be provided. Spinning the pen and counting households to the boundary was the most complicated and time-consuming. The two methods tested here represent simpler, quicker and potentially more robust alternatives to spinning the pen for cluster surveys in urban areas. However, in rural areas, these alternatives would favor initial household selection from lower density (or even potentially empty areas. Bearing in mind these limitations, as well as available resources and feasibility, investigators should choose the most appropriate method for their particular survey context.

  9. Sampling Approaches for Multi-Domain Internet Performance Measurement Infrastructures

    Energy Technology Data Exchange (ETDEWEB)

    Calyam, Prasad

    2014-09-15

    The next-generation of high-performance networks being developed in DOE communities are critical for supporting current and emerging data-intensive science applications. The goal of this project is to investigate multi-domain network status sampling techniques and tools to measure/analyze performance, and thereby provide “network awareness” to end-users and network operators in DOE communities. We leverage the infrastructure and datasets available through perfSONAR, which is a multi-domain measurement framework that has been widely deployed in high-performance computing and networking communities; the DOE community is a core developer and the largest adopter of perfSONAR. Our investigations include development of semantic scheduling algorithms, measurement federation policies, and tools to sample multi-domain and multi-layer network status within perfSONAR deployments. We validate our algorithms and policies with end-to-end measurement analysis tools for various monitoring objectives such as network weather forecasting, anomaly detection, and fault-diagnosis. In addition, we develop a multi-domain architecture for an enterprise-specific perfSONAR deployment that can implement monitoring-objective based sampling and that adheres to any domain-specific measurement policies.

  10. 40 CFR 141.723 - Requirements to respond to significant deficiencies identified in sanitary surveys performed by EPA.

    Science.gov (United States)

    2010-07-01

    ... deficiencies identified in sanitary surveys performed by EPA. 141.723 Section 141.723 Protection of Environment... performed by EPA, systems must respond in writing to significant deficiencies identified in sanitary survey... will address significant deficiencies noted in the survey. (d) Systems must correct significant...

  11. The effects of sampling bias and model complexity on the predictive performance of MaxEnt species distribution models.

    Science.gov (United States)

    Syfert, Mindy M; Smith, Matthew J; Coomes, David A

    2013-01-01

    Species distribution models (SDMs) trained on presence-only data are frequently used in ecological research and conservation planning. However, users of SDM software are faced with a variety of options, and it is not always obvious how selecting one option over another will affect model performance. Working with MaxEnt software and with tree fern presence data from New Zealand, we assessed whether (a) choosing to correct for geographical sampling bias and (b) using complex environmental response curves have strong effects on goodness of fit. SDMs were trained on tree fern data, obtained from an online biodiversity data portal, with two sources that differed in size and geographical sampling bias: a small, widely-distributed set of herbarium specimens and a large, spatially clustered set of ecological survey records. We attempted to correct for geographical sampling bias by incorporating sampling bias grids in the SDMs, created from all georeferenced vascular plants in the datasets, and explored model complexity issues by fitting a wide variety of environmental response curves (known as "feature types" in MaxEnt). In each case, goodness of fit was assessed by comparing predicted range maps with tree fern presences and absences using an independent national dataset to validate the SDMs. We found that correcting for geographical sampling bias led to major improvements in goodness of fit, but did not entirely resolve the problem: predictions made with clustered ecological data were inferior to those made with the herbarium dataset, even after sampling bias correction. We also found that the choice of feature type had negligible effects on predictive performance, indicating that simple feature types may be sufficient once sampling bias is accounted for. Our study emphasizes the importance of reducing geographical sampling bias, where possible, in datasets used to train SDMs, and the effectiveness and essentialness of sampling bias correction within MaxEnt.

  12. Environmental Survey preliminary report, Lawrence Livermore National Laboratory, Livermore, California

    Energy Technology Data Exchange (ETDEWEB)

    1987-12-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE) Lawrence Livermore National Laboratory (LLNL), conducted December 1 through 19, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with LLNL. The Survey covers all environmental media all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at LLNL, and interviews with site personnel. A Sampling and Analysis Plan was developed to assist in further assessing certain of the environmental problems identified during performance of on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory. When completed, the results will be incorporated into the LLNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the LLNL Survey. 70 refs., 58 figs., 52 tabs.,

  13. THE CHANDRA COSMOS-LEGACY SURVEY: THE z > 3 SAMPLE

    Energy Technology Data Exchange (ETDEWEB)

    Marchesi, S.; Civano, F.; Urry, C. M. [Yale Center for Astronomy and Astrophysics, 260 Whitney Avenue, New Haven, CT 06520 (United States); Salvato, M. [Max-Planck-Institut für extraterrestrische Physik, Giessenbachstrasse 1, D-85748 Garching bei München (Germany); Shankar, F. [Department of Physics and Astronomy, University of Southampton, Highfield, SO17 1BJ (United Kingdom); Comastri, A.; Lanzuisi, G.; Vignali, C.; Zamorani, G.; Brusa, M.; Gilli, R. [INAF–Osservatorio Astronomico di Bologna, via Ranzani 1, 40127 Bologna (Italy); Elvis, M. [Harvard Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Trakhtenbrot, B.; Schawinski, K. [Institute for Astronomy, Department of Physics, ETH Zurich, Wolfgang-Pauli-Strasse 27, CH-8093 Zurich (Switzerland); Allevato, V. [Department of Physics, University of Helsinki, Gustaf Hällströmin katu 2a, FI-00014 Helsinki (Finland); Fiore, F. [INAF–Osservatorio Astronomico di Roma, via di Frascati 33, I-00040 Monte Porzio Catone (Italy); Griffiths, R. [Physics and Astronomy Department, Natural Sciences Division, University of Hawaii at Hilo, 200 W. Kawili Street, Hilo, HI 96720 (United States); Hasinger, G. [Institute for Astronomy, 2680 Woodlawn Drive, University of Hawaii, Honolulu, HI 96822 (United States); Miyaji, T. [Instituto de Astronomía sede Ensenada, Universidad Nacional Autónoma de México, Km. 103, Carret. Tijunana-Ensenada, Ensenada, BC (Mexico); Treister, E. [Universidad de Concepción, Departamento de Astronomía, Casilla 160-C, Concepción (Chile)

    2016-08-20

    We present the largest high-redshift (3 < z < 6.85) sample of X-ray-selected active galactic nuclei (AGNs) on a contiguous field, using sources detected in the Chandra COSMOS-Legacy survey. The sample contains 174 sources, 87 with spectroscopic redshift and the other 87 with photometric redshift (z {sub phot}). In this work, we treat z {sub phot} as a probability-weighted sum of contributions, adding to our sample the contribution of sources with z {sub phot} < 3 but z {sub phot} probability distribution >0 at z > 3. We compute the number counts in the observed 0.5–2 keV band, finding a decline in the number of sources at z > 3 and constraining phenomenological models of the X-ray background. We compute the AGN space density at z > 3 in two different luminosity bins. At higher luminosities (log L (2–10 keV) > 44.1 erg s{sup −1}), the space density declines exponentially, dropping by a factor of ∼20 from z ∼ 3 to z ∼ 6. The observed decline is ∼80% steeper at lower luminosities (43.55 erg s{sup −1} < logL(2–10 keV) < 44.1 erg s{sup −1}) from z ∼ 3 to z ∼ 4.5. We study the space density evolution dividing our sample into optically classified Type 1 and Type 2 AGNs. At log L (2–10 keV) > 44.1 erg s{sup −1}, unobscured and obscured objects may have different evolution with redshift, with the obscured component being three times higher at z ∼ 5. Finally, we compare our space density with predictions of quasar activation merger models, whose calibration is based on optically luminous AGNs. These models significantly overpredict the number of expected AGNs at log L (2–10 keV) > 44.1 erg s{sup −1} with respect to our data.

  14. Survey Mode Effects on Valuation of Environmental Goods

    Directory of Open Access Journals (Sweden)

    Jason Bell

    2011-04-01

    Full Text Available This article evaluates the effect of the choice of survey recruitment mode on the value of water quality in lakes, rivers, and streams. Four different modes are compared: bringing respondents to one central location after phone recruitment, mall intercepts in two states, national phone-mail survey, and an Internet survey with a national, probability-based panel. The modes differ in terms of the representativeness of the samples, non-response rates, sample selection effects, and consistency of responses. The article also shows that the estimated value of water quality can differ substantially depending on the survey mode. The national Internet panel has the most desirable properties with respect to performance on the four important survey dimensions of interest.

  15. Wide Field Infrared Survey Telescope [WFIRST]: telescope design and simulated performance

    Science.gov (United States)

    Goullioud, R.; Content, D. A.; Kuan, G. M.; Moore, J. D.; Chang, Z.; Sunada, E. T.; Villalvazo, J.; Hawk, J. P.; Armani, N. V.; Johnson, E. L.; Powell, C. A.

    2012-09-01

    The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics missions by the Astro2010 Decadal Survey, incorporating the Joint Dark Energy Mission payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of the Astro2010 Decadal Survey, the team has been working with the WFIRST Science Definition Team to refine mission and payload concepts. We present the current interim reference mission point design of the payload, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slit-less spectroscopy science channels. We also present the first results of Structural/Thermal/Optical performance modeling of the telescope point design.

  16. The THU-NAOC transient survey: the performance and results from the first year

    International Nuclear Information System (INIS)

    Zhang Tian-Meng; Zhou Xu; Nie Jun-Dan; Jiang Zhao-Ji; Ma Jun; Wang Ling-Zhi; Zhou Zhi-Min; Zou Hu; Wang Xiao-Feng; Chen Jun-Cheng; Zhou Li; Li Wen-Xiong; Liu Qing; Mo Jun; Zhang Kai-Cheng; Yao Xin-Yu; Zhao Xu-Lin; Huang Fang; Zhang Ju-Jia; Wu Chao

    2015-01-01

    The Tsinghua University-National Astronomical Observatories, Chinese Academy of Sciences (NAOC) Transient Survey is an automatic survey that conducts a systematic exploration of optical transients. This project utilizes a 60/90 cm Schmidt telescope at the Xinglong Station of NAOC. This survey repeatedly covers ∼ 1000 square degrees of the northern sky with a cadence of 3–4 d. With an exposure of 60 s, the survey reaches a limiting unfiltered magnitude of about 19.5 mag, which enables us to discover supernovae in their relatively young stages. We describe the overall performance of our survey during the first year and present some preliminary results. (research papers)

  17. How to Use the School Survey of Practices Associated with High Performance. REL 2016-162

    Science.gov (United States)

    Weinstock, Phyllis; Yumoto, Futoshi; Abe, Yasuyo; Meyers, Coby; Wan, Yinmei

    2016-01-01

    This report describes and explains how to use the School Survey of Practices Associated with High Performance, which measures the degree to which schools are engaging in practices associated with high performance. State education departments and school districts can use the survey results to identify and describe school practices associated with…

  18. Improving the collection of knowledge, attitude and practice data with community surveys: a comparison of two second-stage sampling methods.

    Science.gov (United States)

    Davis, Rosemary H; Valadez, Joseph J

    2014-12-01

    Second-stage sampling techniques, including spatial segmentation, are widely used in community health surveys when reliable household sampling frames are not available. In India, an unresearched technique for household selection is used in eight states, which samples the house with the last marriage or birth as the starting point. Users question whether this last-birth or last-marriage (LBLM) approach introduces bias affecting survey results. We conducted two simultaneous population-based surveys. One used segmentation sampling; the other used LBLM. LBLM sampling required modification before assessment was possible and a more systematic approach was tested using last birth only. We compared coverage proportions produced by the two independent samples for six malaria indicators and demographic variables (education, wealth and caste). We then measured the level of agreement between the caste of the selected participant and the caste of the health worker making the selection. No significant difference between methods was found for the point estimates of six malaria indicators, education, caste or wealth of the survey participants (range of P: 0.06 to >0.99). A poor level of agreement occurred between the caste of the health worker used in household selection and the caste of the final participant, (Κ = 0.185), revealing little association between the two, and thereby indicating that caste was not a source of bias. Although LBLM was not testable, a systematic last-birth approach was tested. If documented concerns of last-birth sampling are addressed, this new method could offer an acceptable alternative to segmentation in India. However, inter-state caste variation could affect this result. Therefore, additional assessment of last birth is required before wider implementation is recommended. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2013; all rights reserved.

  19. Optimal Allocation of Sampling Effort in Depletion Surveys

    Science.gov (United States)

    We consider the problem of designing a depletion or removal survey as part of estimating animal abundance for populations with imperfect capture or detection rates. In a depletion survey, animals are captured from a given area, counted, and withheld from the population. This proc...

  20. Radiological Survey Results for Areas A1 North, A5A, A6, and B2 at the Molycorp Washington Remediation Project, Washington, Pennsylvania

    International Nuclear Information System (INIS)

    W.C. Adams

    2007-01-01

    Perform radiological surveys of the Molycorp Washington Remediation Project (MWRP) facility in Washington, Pennsylvania. The U.S. Nuclear Regulatory Commission (NRC) requested the Oak Ridge Institute for Science and Education (ORISE) to provide limited training pertaining to ORISE radiological soil scanning and sampling procedures to the Pennsylvania Department of Environmental Protection (PADEP) personnel. In addition, the NRC also requested that ORISE perform radiological surveys of the Molycorp Washington Remediation Project (MWRP) facility in Washington, Pennsylvania (Figure 1). ORISE has and will continue to interface with PADEP personnel in a joint effort to perform confirmatory radiological surveys, consisting of gamma scans and soil sampling, at the MWRP facility. PADEP personnel will continue to submit soil samples that they collect to ORISE for analyses. PADEP sample results, along with ORISE results, will be provided to the NRC and PADEP so that decisions regarding the radiological status of the surveyed areas can be determined. ORISE performed radiological surveys during the period of November 28 and 29, 2006. The survey unit (SU) available for ORISE radiological survey activities was Area A1 North. The MWRP final status survey (FSS) results for Area A1 North were reviewed prior to these survey activities. Prior to ORISE's survey activities, PADEP personnel had performed radiological surveys and collected soil samples from SU Areas A5A and A6. These samples were provided to ORISE for analyses while on site. After the ORISE radiological surveys, PADEP personnel collected soil samples from SU Areas A2 and B2 and these samples were shipped to ORISE for analyses in January 2007. Figure 2 depicts the MWRP Areas A through D; ORISE and PADEP personnel performed survey activities in portions of Areas A and B. For interlaboratory comparison analyses with MWRP's site contractor, Malcolm Pirnie (MP), ORISE requested soil samples from the Area A1 soil stockpiles

  1. Rapid Active Sampling Surveys as a Tool to Evaluate Factors Associated with Acute Gastroenteritis and Norovirus Infection among Children in Rural Guatemala.

    Science.gov (United States)

    Olson, Daniel; Lamb, Molly M; Lopez, Maria R; Paniagua-Avila, Maria A; Zacarias, Alma; Samayoa-Reyes, Gabriela; Cordon-Rosales, Celia; Asturias, Edwin J

    2017-09-01

    We examined burden and factors associated with norovirus (NoV) acute gastroenteritis (AGE) among children in rural Guatemala. Children age 6 weeks to 17 years were enrolled into three AGE surveillance groups, using two-stage cluster sampling: a prospective participatory syndromic surveillance (PSS) cohort and two cross-sectional rapid active sampling (RAS) surveys, conducted from April 2015 to February 2016. Epidemiologic and NoV testing data were used to identify factors associated with NoV infection, AGE, and NoV+ AGE. The three cross-sectional surveys (PSS enrollment visit, RAS Survey 1, and RAS Survey 2) enrolled 1,239 children, who reported 134 (11%) AGE cases, with 20% of AGE and 11% of non-AGE samples positive for NoV. Adjusted analyses identified several modifiable factors associated with AGE and NoV infection. The cross-sectional RAS surveys were practical and cost-effective in identifying population-level risk factors for AGE and NoV, supporting their use as a tool to direct limited public health resources toward high-risk populations.

  2. Variable selection and estimation for longitudinal survey data

    KAUST Repository

    Wang, Li

    2014-09-01

    There is wide interest in studying longitudinal surveys where sample subjects are observed successively over time. Longitudinal surveys have been used in many areas today, for example, in the health and social sciences, to explore relationships or to identify significant variables in regression settings. This paper develops a general strategy for the model selection problem in longitudinal sample surveys. A survey weighted penalized estimating equation approach is proposed to select significant variables and estimate the coefficients simultaneously. The proposed estimators are design consistent and perform as well as the oracle procedure when the correct submodel was known. The estimating function bootstrap is applied to obtain the standard errors of the estimated parameters with good accuracy. A fast and efficient variable selection algorithm is developed to identify significant variables for complex longitudinal survey data. Simulated examples are illustrated to show the usefulness of the proposed methodology under various model settings and sampling designs. © 2014 Elsevier Inc.

  3. Hydrazine Determination in Sludge Samples by High Performance Liquid Chromatography

    Energy Technology Data Exchange (ETDEWEB)

    G. Elias; G. A. Park

    2006-02-01

    A high-performance liquid chromatographic method using ultraviolet (UV) detection was developed to detect and quantify hydrazine in a variety of environmental matrices. The method was developed primarily for sludge samples, but it is also applicable to soil and water samples. The hydrazine in the matrices was derivatized to their hydrazones with benzaldehyde. The derivatized hydrazones were separated using high performance liquid chromatography (HPLC) with a reversed-phase C-18 column in an isocratic mode with methanol-water (95:5, v/v), and detected with UV detection at 313 nm. The detection limit (25 ml) for the new analytical method is 0.0067 mg ml-1of hydrazine. Hydrazine showed low recovery in soil samples because components in soil oxidized hydrazine. Sludge samples that contained relatively high soil content also showed lower recovery. The technique is relatively simple and cost-effective, and is applicable for hydrazine analysis in different environmental matrices.

  4. Spread of Traditional Medicines in India: Results of National Sample Survey Organization's Perception Survey on Use of AYUSH.

    Science.gov (United States)

    Srinivasan, R; Sugumar, V Raji

    2015-10-04

    For the first time, we have a comprehensive database on usage of AYUSH (acronym for Ayurveda, naturopathy and Yoga, Unani, Siddha, and Homeopathy) in India at the household level. This article aims at exploring the spread of the traditional medical systems in India and the perceptions of people on the access and effectiveness of these medical systems using this database. The article uses the unit level data purchased from the National Sample Survey Organization, New Delhi. Household is the basic unit of survey and the data are the collective opinion of the household. This survey shows that less than 30% of Indian households use the traditional medical systems. There is also a regional pattern in the usage of particular type of traditional medicine, reflecting the regional aspects of the development of such medical systems. The strong faith in AYUSH is the main reason for its usage; lack of need for AYUSH and lack of awareness about AYUSH are the main reasons for not using it. With regard to source of medicines in the traditional medical systems, home is the main source in the Indian medical system and private sector is the main source in Homeopathy. This shows that there is need for creating awareness and improving access to traditional medical systems in India. By and large, the users of AYUSH are also convinced about the effectiveness of these traditional medicines. © The Author(s) 2015.

  5. International survey blauwe wijting. Elke seconde een sample

    NARCIS (Netherlands)

    Faessler, S.M.M.

    2011-01-01

    IJMuiden- in 2011 wordt voor het eerst de jaarlijkse blauwe wijting survey gecoördineerd door Schascha Fässler, geboren Zwitser en sinds 2009 als 'fisheries acoustics' scientist' werkzaam bij IMARES in IJmuiden. In onderstaand artikel gaat Fässler nader in op acoustics in het algemeen en de survey

  6. Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada

    International Nuclear Information System (INIS)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs

  7. An open-population hierarchical distance sampling model

    Science.gov (United States)

    Sollmann, Rachel; Beth Gardner,; Richard B Chandler,; Royle, J. Andrew; T Scott Sillett,

    2015-01-01

    Modeling population dynamics while accounting for imperfect detection is essential to monitoring programs. Distance sampling allows estimating population size while accounting for imperfect detection, but existing methods do not allow for direct estimation of demographic parameters. We develop a model that uses temporal correlation in abundance arising from underlying population dynamics to estimate demographic parameters from repeated distance sampling surveys. Using a simulation study motivated by designing a monitoring program for island scrub-jays (Aphelocoma insularis), we investigated the power of this model to detect population trends. We generated temporally autocorrelated abundance and distance sampling data over six surveys, using population rates of change of 0.95 and 0.90. We fit the data generating Markovian model and a mis-specified model with a log-linear time effect on abundance, and derived post hoc trend estimates from a model estimating abundance for each survey separately. We performed these analyses for varying number of survey points. Power to detect population changes was consistently greater under the Markov model than under the alternatives, particularly for reduced numbers of survey points. The model can readily be extended to more complex demographic processes than considered in our simulations. This novel framework can be widely adopted for wildlife population monitoring.

  8. An open-population hierarchical distance sampling model.

    Science.gov (United States)

    Sollmann, Rahel; Gardner, Beth; Chandler, Richard B; Royle, J Andrew; Sillett, T Scott

    2015-02-01

    Modeling population dynamics while accounting for imperfect detection is essential to monitoring programs. Distance sampling allows estimating population size while accounting for imperfect detection, but existing methods do not allow for estimation of demographic parameters. We develop a model that uses temporal correlation in abundance arising from underlying population dynamics to estimate demographic parameters from repeated distance sampling surveys. Using a simulation study motivated by designing a monitoring program for Island Scrub-Jays (Aphelocoma insularis), we investigated the power of this model to detect population trends. We generated temporally autocorrelated abundance and distance sampling data over six surveys, using population rates of change of 0.95 and 0.90. We fit the data generating Markovian model and a mis-specified model with a log-linear time effect on abundance, and derived post hoc trend estimates from a model estimating abundance for each survey separately. We performed these analyses for varying numbers of survey points. Power to detect population changes was consistently greater under the Markov model than under the alternatives, particularly for reduced numbers of survey points. The model can readily be extended to more complex demographic processes than considered in our simulations. This novel framework can be widely adopted for wildlife population monitoring.

  9. Amostra mestra e geoprocessamento: tecnologias para inquéritos domiciliares Master sample and geoprocessing: technologies for household surveys

    Directory of Open Access Journals (Sweden)

    Nilza Nunes da Silva

    2003-08-01

    census enumeration areas in several epidemiological surveys using updated information from the National Survey of Households (PNAD. METHODS: Address data file comprising 72 census enumeration areas was kept as primary sampling units for the city of São Paulo. During the period 1995-2000, three distinct household samples were drawn using the two-stage cluster sampling procedure. Geographic Information System (GIS technology allowed delimiting boundaries, blocks and streets for any primary sampling unit and printing updated maps for selected sub-samples. RESULTS: Twenty-five thousand dwellings made up the permanent address data file of the master sample. A cheaper and quicker selection of each sample, plus gathering information on demographic and topographical profiles of census enumeration areas were the main contribution of the study results. CONCLUSIONS: The master sample concept, integrated with GIS technology, is an advantageous alternative sampling design for household surveys in urban areas. Using the list of addresses from the PNAD updated yearly, although limiting its application to the most populated Brazilian cities, avoids the need of creating an independent sampling procedure for each individual survey carried out in the period between demographic censuses, and it is an important contribution for planning sampling surveys in public health.

  10. Environmental Survey preliminary report, Portsmouth Uranium Enrichment Complex, Piketon, Ohio

    International Nuclear Information System (INIS)

    1987-08-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Portsmouth Uranium Enrichment Complex (PUEC), conducted August 4 through August 15, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Team specialists are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at PUEC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Argonne National Laboratory. When completed, the results will be incorporated into the PUEC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the PUEC Survey. 55 refs., 22 figs., 21 tabs

  11. Precision of systematic and random sampling in clustered populations: habitat patches and aggregating organisms.

    Science.gov (United States)

    McGarvey, Richard; Burch, Paul; Matthews, Janet M

    2016-01-01

    Natural populations of plants and animals spatially cluster because (1) suitable habitat is patchy, and (2) within suitable habitat, individuals aggregate further into clusters of higher density. We compare the precision of random and systematic field sampling survey designs under these two processes of species clustering. Second, we evaluate the performance of 13 estimators for the variance of the sample mean from a systematic survey. Replicated simulated surveys, as counts from 100 transects, allocated either randomly or systematically within the study region, were used to estimate population density in six spatial point populations including habitat patches and Matérn circular clustered aggregations of organisms, together and in combination. The standard one-start aligned systematic survey design, a uniform 10 x 10 grid of transects, was much more precise. Variances of the 10 000 replicated systematic survey mean densities were one-third to one-fifth of those from randomly allocated transects, implying transect sample sizes giving equivalent precision by random survey would need to be three to five times larger. Organisms being restricted to patches of habitat was alone sufficient to yield this precision advantage for the systematic design. But this improved precision for systematic sampling in clustered populations is underestimated by standard variance estimators used to compute confidence intervals. True variance for the survey sample mean was computed from the variance of 10 000 simulated survey mean estimates. Testing 10 published and three newly proposed variance estimators, the two variance estimators (v) that corrected for inter-transect correlation (ν₈ and ν(W)) were the most accurate and also the most precise in clustered populations. These greatly outperformed the two "post-stratification" variance estimators (ν₂ and ν₃) that are now more commonly applied in systematic surveys. Similar variance estimator performance rankings were found with

  12. Facilities Performance Indicators Report, 2004-05. Facilities Core Data Survey

    Science.gov (United States)

    Glazner, Steve, Ed.

    2006-01-01

    The purpose of "Facilities Performance Indicators" is to provide a representative set of statistics about facilities in educational institutions. The second iteration of the web-based Facilities Core Data Survey was posted and available to facilities professionals at more than 3,000 institutions in the Fall of 2005. The website offered a printed…

  13. The Sloan Digital Sky Survey Quasar Lens Search. IV. Statistical Lens Sample from the Fifth Data Release

    Energy Technology Data Exchange (ETDEWEB)

    Inada, Naohisa; /Wako, RIKEN /Tokyo U., ICEPP; Oguri, Masamune; /Natl. Astron. Observ. of Japan /Stanford U., Phys. Dept.; Shin, Min-Su; /Michigan U. /Princeton U. Observ.; Kayo, Issha; /Tokyo U., ICRR; Strauss, Michael A.; /Princeton U. Observ.; Hennawi, Joseph F.; /UC, Berkeley /Heidelberg, Max Planck Inst. Astron.; Morokuma, Tomoki; /Natl. Astron. Observ. of Japan; Becker, Robert H.; /LLNL, Livermore /UC, Davis; White, Richard L.; /Baltimore, Space Telescope Sci.; Kochanek, Christopher S.; /Ohio State U.; Gregg, Michael D.; /LLNL, Livermore /UC, Davis /Exeter U.

    2010-05-01

    We present the second report of our systematic search for strongly lensed quasars from the data of the Sloan Digital Sky Survey (SDSS). From extensive follow-up observations of 136 candidate objects, we find 36 lenses in the full sample of 77,429 spectroscopically confirmed quasars in the SDSS Data Release 5. We then define a complete sample of 19 lenses, including 11 from our previous search in the SDSS Data Release 3, from the sample of 36,287 quasars with i < 19.1 in the redshift range 0.6 < z < 2.2, where we require the lenses to have image separations of 1 < {theta} < 20 and i-band magnitude differences between the two images smaller than 1.25 mag. Among the 19 lensed quasars, 3 have quadruple-image configurations, while the remaining 16 show double images. This lens sample constrains the cosmological constant to be {Omega}{sub {Lambda}} = 0.84{sub -0.08}{sup +0.06}(stat.){sub -0.07}{sup + 0.09}(syst.) assuming a flat universe, which is in good agreement with other cosmological observations. We also report the discoveries of 7 binary quasars with separations ranging from 1.1 to 16.6, which are identified in the course of our lens survey. This study concludes the construction of our statistical lens sample in the full SDSS-I data set.

  14. The Estimated Impact of Performing Arts on Adolescent Mood within a Community Sample of Mental Health Professionals

    Science.gov (United States)

    King, Alan; Grieves, Julie; Opp, Dean

    2007-01-01

    In a brief survey, the authors solicited professional opinions regarding the probable impact of performing arts on adolescent mood stability using a hypothetical scenario where 20 moderately depressed 15-year-olds agreed to participate in a high school play, musical, or other singing performance. The results of the survey indicated that clinicians…

  15. Experimental performance evaluation of two stack sampling systems in a plutonium facility

    International Nuclear Information System (INIS)

    Glissmeyer, J.A.

    1992-04-01

    The evaluation of two routine stack sampling systems at the Z-Plant plutonium facility operated by Rockwell International for USERDA is part of a larger study, sponsored by Rockwell and conducted by Battelle, Pacific Northwest Laboratories, of gaseous effluent sampling systems. The gaseous effluent sampling systems evaluated are located at the main plant ventilation stack (291-Z-1) and at a vessel vent stack (296-Z-3). A preliminary report, which was a paper study issued in April 1976, identified many deficiencies in the existing sampling systems and made recommendations for corrective action. The objectives of this experimental evaluation of those sampling systems were as follows: Characterize the radioactive aerosols in the stack effluents; Develop a tracer aerosol technique for validating particulate effluent sampling system performance; Evaluate the performance of the existing routine sampling systems and their compliance with the sponsor's criteria; and Recommend corrective action where required. The tracer aerosol approach to sampler evaluation was chosen because the low concentrations of radioactive particulates in the effluents would otherwise require much longer sampling times and thus more time to complete this evaluation. The following report describes the sampling systems that are the subject of this study and then details the experiments performed. The results are then presented and discussed. Much of the raw and finished data are included in the appendices

  16. Radiological survey results at 5 Porter Street, Beverly, Massachusetts (VB019)

    International Nuclear Information System (INIS)

    Foley, R.D.; Johnson, C.A.

    1992-07-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 5 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Site Remedial Action Program guidelines

  17. Radiological survey results at 2 Porter Street, Beverly, Massachusetts (VB005)

    International Nuclear Information System (INIS)

    Foley, R.D.; Carrier, R.F.

    1992-08-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 2 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples fore radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

  18. Radiological survey results at 9 Porter Street, Beverly, Massachusetts (VB020)

    International Nuclear Information System (INIS)

    Foley, R.D.; Johnson, C.A.

    1992-07-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 9 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

  19. Environmental Survey preliminary report, Kansas City Plant, Kansas City, Missouri

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE), Kansas City Plant (KCP), conducted March 23 through April 3, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the KCP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data observations of the operations performed at the KCP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the KCP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the KCP Survey. 94 refs., 39 figs., 55 tabs.

  20. Environmental Survey preliminary report, Kansas City Plant, Kansas City, Missouri

    International Nuclear Information System (INIS)

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE), Kansas City Plant (KCP), conducted March 23 through April 3, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the KCP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data observations of the operations performed at the KCP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the KCP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the KCP Survey. 94 refs., 39 figs., 55 tabs

  1. Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs.

  2. Heavy mineral survey for uranium in the Philippines

    International Nuclear Information System (INIS)

    Tauchid, M.; Santos, G. Jr.; Hernandez, E.; Bernido, C.

    1983-01-01

    A reconnaissance geochemical survey for uranium was carried out in the island of Samar in the Philippines covering an area of about 13,000 km 2 . The survey represents the first practical demonstration in the country of the use of geochemical techniques to outline large possibly interesting areas within a short period and with modest monetary expenditure. The survey entailed the systematic collection of 1530 heavy mineral concentrates, stream sediments and water samples, and the measurement of radioactivity at 510 stations along the major drainage system of Samar. The average sampling density was 1/20-25 km 2 . All solid samples were analysed for U, Cu, Pb, Zn, Mn, Ag, Co and Ni. Uranium, radon, conductivity and pH were measured in most of the water samples collected. More than 9000 chemical determinations were made. Results of the survey clearly point to the usefulness of heavy mineral sampling at the low density level of observation. The non-magnetic fraction of the heavy mineral concentrates outlined strong and well defined areas of interest for most of the elements analysed. Stream sediment sampling at this sampling density indicated weaker, less clearly defined anomalies. Uranium and radon analyses performed on stream water samples and ground scintillometer readings provided invaluable complementary information relevant to the evaluation of the island's uranium potential. (author)

  3. Using Electronic Surveys: Advice from Survey Professionals.

    Directory of Open Access Journals (Sweden)

    David M. Shannon

    2002-01-01

    Full Text Available The study reports the perceptions and recommendations of sixty-two experienced survey..researchers from the American Educational Research Association regarding the use of..electronic surveys. The most positive aspects cited for the use of electronic surveys were..reduction of costs (i.e., postage, phone charges, the use of electronic mail for pre-notification or..follow-up purposes, and the compatibility of data with existing software programs. These..professionals expressed limitations in using electronic surveys pertaining to the limited..sampling frame as well as issues of confidentiality, privacy, and the credibility of the sample...They advised that electronic surveys designed with the varied technological background and..capabilities of the respondent in mind, follow sound principles of survey construction, and be..administered to pre-notified, targeted populations with published email addresses.

  4. Dark Energy Survey Year 1 Results: Galaxy Sample for BAO Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Crocce, M.; et al.

    2017-12-17

    We define and characterise a sample of 1.3 million galaxies extracted from the first year of Dark Energy Survey data, optimised to measure Baryon Acoustic Oscillations in the presence of significant redshift uncertainties. The sample is dominated by luminous red galaxies located at redshifts $z \\gtrsim 0.6$. We define the exact selection using color and magnitude cuts that balance the need of high number densities and small photometric redshift uncertainties, using the corresponding forecasted BAO distance error as a figure-of-merit in the process. The typical photo-$z$ uncertainty varies from $2.3\\%$ to $3.6\\%$ (in units of 1+$z$) from $z=0.6$ to $1$, with number densities from $200$ to $130$ galaxies per deg$^2$ in tomographic bins of width $\\Delta z = 0.1$. Next we summarise the validation of the photometric redshift estimation. We characterise and mitigate observational systematics including stellar contamination, and show that the clustering on large scales is robust in front of those contaminants. We show that the clustering signal in the auto-correlations and cross-correlations is generally consistent with theoretical models, which serves as an additional test of the redshift distributions.

  5. Using the Superpopulation Model for Imputations and Variance Computation in Survey Sampling

    Directory of Open Access Journals (Sweden)

    Petr Novák

    2012-03-01

    Full Text Available This study is aimed at variance computation techniques for estimates of population characteristics based on survey sampling and imputation. We use the superpopulation regression model, which means that the target variable values for each statistical unit are treated as random realizations of a linear regression model with weighted variance. We focus on regression models with one auxiliary variable and no intercept, which have many applications and straightforward interpretation in business statistics. Furthermore, we deal with caseswhere the estimates are not independent and thus the covariance must be computed. We also consider chained regression models with auxiliary variables as random variables instead of constants.

  6. Performance Comparison of Reconstruction Algorithms in Discrete Blind Multi-Coset Sampling

    DEFF Research Database (Denmark)

    Grigoryan, Ruben; Arildsen, Thomas; Tandur, Deepaknath

    2012-01-01

    This paper investigates the performance of different reconstruction algorithms in discrete blind multi-coset sampling. Multi-coset scheme is a promising compressed sensing architecture that can replace traditional Nyquist-rate sampling in the applications with multi-band frequency sparse signals...

  7. Technical basis for the performance of radiological surveys in support of nuclear facility decommissioning/deactivation utilizing the Laser-Assisted Ranging and Data System (LARADS)

    International Nuclear Information System (INIS)

    Wade, C.D.

    1997-06-01

    This document describes the implementation of the Laser-Assisted Ranging and Data System (LARADS) as it applies to performing radiological surveys on facility exterior and interior surfaces. The LARADS enables the system operator to document scanning measurements, stationary radiological measurements, and sample locations of surfaces, with the radiological readings and exact coordinates (<2 cm [0.8 in.] precision) automatically logged in real-time. After the survey is completed, the information is downloaded to a geographical information system, and the radiological information is overlaid on a digital picture of the survey area or may be generated as a computer- aided drafted drawing. The final product is a track map or contour of the survey area that clearly shows the area covered by the detector and the locations of elevated readings. The exact reproducibility of data facilitates locating hot spots for remediation and provides for objective review by regulators and verifiers

  8. Using lot quality-assurance sampling and area sampling to identify priority areas for trachoma control: Viet Nam.

    Science.gov (United States)

    Myatt, Mark; Mai, Nguyen Phuong; Quynh, Nguyen Quang; Nga, Nguyen Huy; Tai, Ha Huy; Long, Nguyen Hung; Minh, Tran Hung; Limburg, Hans

    2005-10-01

    To report on the use of lot quality-assurance sampling (LQAS) surveys undertaken within an area-sampling framework to identify priority areas for intervention with trachoma control activities in Viet Nam. The LQAS survey method for the rapid assessment of the prevalence of active trachoma was adapted for use in Viet Nam with the aim of classifying individual communes by the prevalence of active trachoma among children in primary school. School-based sampling was used; school sites to be sampled were selected using an area-sampling approach. A total of 719 communes in 41 districts in 18 provinces were surveyed. Survey staff found the LQAS survey method both simple and rapid to use after initial problems with area-sampling methods were identified and remedied. The method yielded a finer spatial resolution of prevalence than had been previously achieved in Viet Nam using semiquantitative rapid assessment surveys and multistage cluster-sampled surveys. When used with area-sampling techniques, the LQAS survey method has the potential to form the basis of survey instruments that can be used to efficiently target resources for interventions against active trachoma. With additional work, such methods could provide a generally applicable tool for effective programme planning and for the certification of the elimination of trachoma as a blinding disease.

  9. The NuSTAR  Extragalactic Surveys: X-Ray Spectroscopic Analysis of the Bright Hard-band Selected Sample

    Science.gov (United States)

    Zappacosta, L.; Comastri, A.; Civano, F.; Puccetti, S.; Fiore, F.; Aird, J.; Del Moro, A.; Lansbury, G. B.; Lanzuisi, G.; Goulding, A.; Mullaney, J. R.; Stern, D.; Ajello, M.; Alexander, D. M.; Ballantyne, D. R.; Bauer, F. E.; Brandt, W. N.; Chen, C.-T. J.; Farrah, D.; Harrison, F. A.; Gandhi, P.; Lanz, L.; Masini, A.; Marchesi, S.; Ricci, C.; Treister, E.

    2018-02-01

    We discuss the spectral analysis of a sample of 63 active galactic nuclei (AGN) detected above a limiting flux of S(8{--}24 {keV})=7× {10}-14 {erg} {{{s}}}-1 {{cm}}-2 in the multi-tiered NuSTAR extragalactic survey program. The sources span a redshift range z=0{--}2.1 (median =0.58). The spectral analysis is performed over the broad 0.5–24 keV energy range, combining NuSTAR with Chandra and/or XMM-Newton data and employing empirical and physically motivated models. This constitutes the largest sample of AGN selected at > 10 {keV} to be homogeneously spectrally analyzed at these flux levels. We study the distribution of spectral parameters such as photon index, column density ({N}{{H}}), reflection parameter ({\\boldsymbol{R}}), and 10–40 keV luminosity ({L}{{X}}). Heavily obscured ({log}[{N}{{H}}/{{cm}}-2]≥slant 23) and Compton-thick (CT; {log}[{N}{{H}}/{{cm}}-2]≥slant 24) AGN constitute ∼25% (15–17 sources) and ∼2–3% (1–2 sources) of the sample, respectively. The observed {N}{{H}} distribution agrees fairly well with predictions of cosmic X-ray background population-synthesis models (CXBPSM). We estimate the intrinsic fraction of AGN as a function of {N}{{H}}, accounting for the bias against obscured AGN in a flux-selected sample. The fraction of CT AGN relative to {log}[{N}{{H}}/{{cm}}-2]=20{--}24 AGN is poorly constrained, formally in the range 2–56% (90% upper limit of 66%). We derived a fraction (f abs) of obscured AGN ({log}[{N}{{H}}/{{cm}}-2]=22{--}24) as a function of {L}{{X}} in agreement with CXBPSM and previous zvalues.

  10. Statistical properties of mean stand biomass estimators in a LIDAR-based double sampling forest survey design.

    Science.gov (United States)

    H.E. Anderson; J. Breidenbach

    2007-01-01

    Airborne laser scanning (LIDAR) can be a valuable tool in double-sampling forest survey designs. LIDAR-derived forest structure metrics are often highly correlated with important forest inventory variables, such as mean stand biomass, and LIDAR-based synthetic regression estimators have the potential to be highly efficient compared to single-stage estimators, which...

  11. Information Sharing, Cooperative Behaviour and Hotel Performance: A Survey of the Kenyan Hospitality Industry

    Directory of Open Access Journals (Sweden)

    Sammy Odari Namusonge

    2015-10-01

    Full Text Available Information sharing is the life blood of supply chain collaboration. Its role in achieving operational performance of supply chains has been widely acclaimed. However whether information sharing would result in improved performance in the context of the hospitality industry has not been empirically determined. This study sought to find out the role of information sharing on hotel performance when the relationship was mediated by cooperative behaviour. A survey design was employed where proportionate stratified sampling was used to select 50 out of 57 town hotels. Data was collected through the use of questionnaires as well interview guides to the procurement\\supply chain departments of these hotels. Logarithmic transformations were used in conjunction with multiple regression analysis to determine the relationship between information sharing, cooperative behaviour and hotel performance. The study concludes that information sharing in the Kenyan hospitality industry does not directly relate to hotel performance. Its relationship is mediated by cooperative behaviour (trust and attitude with supply chain partners. This suggests that information sharing is essential but insufficient by itself to bring significant performance improvements in hotels in the Kenyan hospitality industry. A possible reason for this is that this collaborative practice is highly dependent on information sharing capability, structure of the information as well as culture. Through quadrant analysis the study identifies and recommends the sharing of information about long term strategic plans and events such as entering new markets and acquiring a new customer base as an area of primary priority for improvement.

  12. A Performance Survey on Stack-based and Register-based Virtual Machines

    OpenAIRE

    Fang, Ruijie; Liu, Siqi

    2016-01-01

    Virtual machines have been widely adapted for high-level programming language implementations and for providing a degree of platform neutrality. As the overall use and adaptation of virtual machines grow, the overall performance of virtual machines has become a widely-discussed topic. In this paper, we present a survey on the performance differences of the two most widely adapted types of virtual machines - the stack-based virtual machine and the register-based virtual machine - using various...

  13. A Survey of the Duties and Job Performance of Student Assistants in Access Services

    Science.gov (United States)

    Tolppanen, Bradley P.; Derr, Janice

    2009-01-01

    The results of a recently conducted Web-based survey of Access Services department supervisors are presented in this article. The survey, which was completed by 94 respondents, identified 19 core tasks completed by student assistants and further found a high overall approval of student assistant job performance. The information generated by the…

  14. Like a virgin (mother): analysis of data from a longitudinal, US population representative sample survey

    OpenAIRE

    Herring, Amy H; Attard, Samantha M; Gordon-Larsen, Penny; Joyner, William H; Halpern, Carolyn T

    2013-01-01

    Objective To estimate the incidence of self report of pregnancy without sexual intercourse (virgin pregnancy) and factors related to such reporting, in a population representative group of US adolescents and young adults. Design Longitudinal, population representative sample survey. Setting Nationally representative, multiethnic National Longitudinal Study of Adolescent Health, United States. Participants 7870 women enrolled at wave I (1995) and completing the most recent wave of data collect...

  15. STATISTICAL EVALUATION OF SMALL SCALE MIXING DEMONSTRATION SAMPLING AND BATCH TRANSFER PERFORMANCE - 12093

    Energy Technology Data Exchange (ETDEWEB)

    GREER DA; THIEN MG

    2012-01-12

    The ability to effectively mix, sample, certify, and deliver consistent batches of High Level Waste (HLW) feed from the Hanford Double Shell Tanks (DST) to the Waste Treatment and Immobilization Plant (WTP) presents a significant mission risk with potential to impact mission length and the quantity of HLW glass produced. DOE's Tank Operations Contractor, Washington River Protection Solutions (WRPS) has previously presented the results of mixing performance in two different sizes of small scale DSTs to support scale up estimates of full scale DST mixing performance. Currently, sufficient sampling of DSTs is one of the largest programmatic risks that could prevent timely delivery of high level waste to the WTP. WRPS has performed small scale mixing and sampling demonstrations to study the ability to sufficiently sample the tanks. The statistical evaluation of the demonstration results which lead to the conclusion that the two scales of small DST are behaving similarly and that full scale performance is predictable will be presented. This work is essential to reduce the risk of requiring a new dedicated feed sampling facility and will guide future optimization work to ensure the waste feed delivery mission will be accomplished successfully. This paper will focus on the analytical data collected from mixing, sampling, and batch transfer testing from the small scale mixing demonstration tanks and how those data are being interpreted to begin to understand the relationship between samples taken prior to transfer and samples from the subsequent batches transferred. An overview of the types of data collected and examples of typical raw data will be provided. The paper will then discuss the processing and manipulation of the data which is necessary to begin evaluating sampling and batch transfer performance. This discussion will also include the evaluation of the analytical measurement capability with regard to the simulant material used in the demonstration tests. The

  16. Radiological survey results at Porter Street City Park, Beverly, Massachusetts (VB026)

    International Nuclear Information System (INIS)

    Foley, R.D.; Johnson, C.A.

    1992-08-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the Porter Street City Park, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

  17. Formerly utilized MED/AEC sites remedial action program. Radiological survey of the Middlesex Sampling Plant, Middlesex, New Jersey. Final report

    International Nuclear Information System (INIS)

    1977-11-01

    The results of a radiological survey of the former Middlesex Sampling Plant, Middlesex, New Jersey, are presented in this report. The surveyed property served as a uranium ore sampling plant during the 1940's and early 1950's. It was released for unrestricted use in 1968 following a radiological survey by the Atomic Energy Commission and is now a reserve training center for the U.S. Marine Sixth Motor Transport Battalion. The present survey was undertaken to determine whether the existing radiological status of the property is consistent with current health guidelines and radiation protection practices. The radiological survey included measurement of residual alpha and beta-gamma contamination levels, radon and radon daughter concentrations in buildings, external gamma radiation levels on the site and on adjacent property, and radium concentrations in soil on the site and on adjacent property. Surface contamination levels exceeded U.S. Nuclear Regulatory Commission (NRC) guidelines and 222 Rn concentration levels exceeded the non-occupational maximum permissible concentration MPC/sub a/ of 3 pCi/liter in some structures. These results indicate the possible need for extensive radon and radon daughter measurements in structures both onsite and offsite over periods as suggested by the U.S. Surgeon General

  18. Representative mass reduction in sampling

    DEFF Research Database (Denmark)

    Petersen, Lars; Esbensen, Harry Kim; Dahl, Casper Kierulf

    2004-01-01

    We here present a comprehensive survey of current mass reduction principles and hardware available in the current market. We conduct a rigorous comparison study of the performance of 17 field and/or laboratory instruments or methods which are quantitatively characterized (and ranked) for accuracy...... dividers, the Boerner Divider, the ??spoon method??, alternate/fractional shoveling and grab sampling. Only devices based on riffle splitting principles (static or rotational) passes the ultimate representativity test (with minor, but significant relative differences). Grab sampling, the overwhelmingly...... most often used mass reduction method, performs appallingly?its use must be discontinued (with the singular exception for completely homogenized fine powders). Only proper mass reduction (i.e. carried out in complete compliance with all appropriate design principles, maintenance and cleaning rules) can...

  19. The U.S. Geological Survey's TRIGA® reactor

    Science.gov (United States)

    DeBey, Timothy M.; Roy, Brycen R.; Brady, Sally R.

    2012-01-01

    The U.S. Geological Survey (USGS) operates a low-enriched uranium-fueled, pool-type reactor located at the Federal Center in Denver, Colorado. The mission of the Geological Survey TRIGA® Reactor (GSTR) is to support USGS science by providing information on geologic, plant, and animal specimens to advance methods and techniques unique to nuclear reactors. The reactor facility is supported by programs across the USGS and is organizationally under the Associate Director for Energy and Minerals, and Environmental Health. The GSTR is the only facility in the United States capable of performing automated delayed neutron analyses for detecting fissile and fissionable isotopes. Samples from around the world are submitted to the USGS for analysis using the reactor facility. Qualitative and quantitative elemental analyses, spatial elemental analyses, and geochronology are performed. Few research reactor facilities in the United States are equipped to handle the large number of samples processed at the GSTR. Historically, more than 450,000 sample irradiations have been performed at the USGS facility. Providing impartial scientific information to resource managers, planners, and other interested parties throughout the world is an integral part of the research effort of the USGS.

  20. Environmental Survey preliminary report, Y-12 Plant, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1987-11-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE), Y-12 Plant, conducted November 10 through 21 and December 9 through 11, 1986. This Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Y-12 Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Y-12, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the Y-12 Plant Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Y-12 Plant Survey. 80 refs., 76 figs., 61 tabs

  1. Environmental Survey preliminary report, Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1987-11-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the Department of Energy (DOE), Y-12 Plant, conducted November 10 through 21 and December 9 through 11, 1986. This Survey is being conducted by a multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Y-12 Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations performed at Y-12, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by DOE's Argonne National Laboratory. When completed, the results will be incorporated into the Y-12 Plant Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Y-12 Plant Survey. 80 refs., 76 figs., 61 tabs.

  2. A survey on relationship between capital structure, free cash flow and diversification and firm performance of listed companies in Tehran Stock Exchange

    Directory of Open Access Journals (Sweden)

    Mohammad Khodaei Valahzaghard

    2014-10-01

    Full Text Available This paper presents an empirical investigation to study the effects of free cash flow, share diversification and capital structure on Tobin-Q in selected firms on Tehran Stock Exchange. The population of the survey includes 520 firms listed on this exchange until year 2012 and the survey uses a sample of 105 firms, randomly. The study uses the models originally developed by Palepu (1985 [Palepu, K. (1985. Diversification strategy, profit performance and the entropy measure. Strategic Management Journal, 6(3, 239-255.] to measure the effects of different factors on Tobin Q. The study has indicated that while capital structure and free cash flow influence positively on Tobin Q, diversification has maintained a negative and meaningful relationship with Tobin Q.

  3. Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR

    Directory of Open Access Journals (Sweden)

    Bochaton Audrey

    2007-06-01

    Full Text Available Abstract Background Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. Methods We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. Application We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. Conclusion This paper describes the conceptual reasoning behind

  4. Sampling in health geography: reconciling geographical objectives and probabilistic methods. An example of a health survey in Vientiane (Lao PDR).

    Science.gov (United States)

    Vallée, Julie; Souris, Marc; Fournet, Florence; Bochaton, Audrey; Mobillion, Virginie; Peyronnie, Karine; Salem, Gérard

    2007-06-01

    Geographical objectives and probabilistic methods are difficult to reconcile in a unique health survey. Probabilistic methods focus on individuals to provide estimates of a variable's prevalence with a certain precision, while geographical approaches emphasise the selection of specific areas to study interactions between spatial characteristics and health outcomes. A sample selected from a small number of specific areas creates statistical challenges: the observations are not independent at the local level, and this results in poor statistical validity at the global level. Therefore, it is difficult to construct a sample that is appropriate for both geographical and probability methods. We used a two-stage selection procedure with a first non-random stage of selection of clusters. Instead of randomly selecting clusters, we deliberately chose a group of clusters, which as a whole would contain all the variation in health measures in the population. As there was no health information available before the survey, we selected a priori determinants that can influence the spatial homogeneity of the health characteristics. This method yields a distribution of variables in the sample that closely resembles that in the overall population, something that cannot be guaranteed with randomly-selected clusters, especially if the number of selected clusters is small. In this way, we were able to survey specific areas while minimising design effects and maximising statistical precision. We applied this strategy in a health survey carried out in Vientiane, Lao People's Democratic Republic. We selected well-known health determinants with unequal spatial distribution within the city: nationality and literacy. We deliberately selected a combination of clusters whose distribution of nationality and literacy is similar to the distribution in the general population. This paper describes the conceptual reasoning behind the construction of the survey sample and shows that it can be

  5. Issues in environmental survey design

    International Nuclear Information System (INIS)

    Iachan, R.

    1989-01-01

    Several environmental survey design issues are discussed and illustrated with surveys designed by Research Triangle Institute statisticians. Issues related to sampling and nonsampling errors are illustrated for indoor air quality surveys, radon surveys, pesticide surveys, and occupational and personal exposure surveys. Sample design issues include the use of auxiliary information (e.g. for stratification), and sampling in time. We also discuss the reduction and estimation of nonsampling errors, including nonresponse and measurement bias

  6. [The methodology and sample description of the National Survey on Addiction Problems in Hungary 2015 (NSAPH 2015)].

    Science.gov (United States)

    Paksi, Borbala; Demetrovics, Zsolt; Magi, Anna; Felvinczi, Katalin

    2017-06-01

    This paper introduces the methods and methodological findings of the National Survey on Addiction Problems in Hungary (NSAPH 2015). Use patterns of smoking, alcohol use and other psychoactive substances were measured as well as that of certain behavioural addictions (problematic gambling - PGSI, DSM-V, eating disorders - SCOFF, problematic internet use - PIUQ, problematic on-line gaming - POGO, problematic social media use - FAS, exercise addictions - EAI-HU, work addiction - BWAS, compulsive buying - CBS). The paper describes the applied measurement techniques, sample selection, recruitment of respondents and the data collection strategy as well. Methodological results of the survey including reliability and validity of the measures are reported. The NSAPH 2015 research was carried out on a nationally representative sample of the Hungarian adult population aged 16-64 yrs (gross sample 2477, net sample 2274 persons) with the age group of 18-34 being overrepresented. Statistical analysis of the weight-distribution suggests that weighting did not create any artificial distortion in the database leaving the representativeness of the sample unaffected. The size of the weighted sample of the 18-64 years old adult population is 1490 persons. The extent of the theoretical margin of error in the weighted sample is ±2,5%, at a reliability level of 95% which is in line with the original data collection plans. Based on the analysis of reliability and the extent of errors beyond sampling within the context of the database we conclude that inconsistencies create relatively minor distortions in cumulative prevalence rates; consequently the database makes possible the reliable estimation of risk factors related to different substance use behaviours. The reliability indexes of measurements used for prevalence estimates of behavioural addictions proved to be appropriate, though the psychometric features in some cases suggest the presence of redundant items. The comparison of

  7. Balanced sampling

    NARCIS (Netherlands)

    Brus, D.J.

    2015-01-01

    In balanced sampling a linear relation between the soil property of interest and one or more covariates with known means is exploited in selecting the sampling locations. Recent developments make this sampling design attractive for statistical soil surveys. This paper introduces balanced sampling

  8. The Hubble Space Telescope Medium Deep Survey Cluster Sample: Methodology and Data

    Science.gov (United States)

    Ostrander, E. J.; Nichol, R. C.; Ratnatunga, K. U.; Griffiths, R. E.

    1998-12-01

    We present a new, objectively selected, sample of galaxy overdensities detected in the Hubble Space Telescope Medium Deep Survey (MDS). These clusters/groups were found using an automated procedure that involved searching for statistically significant galaxy overdensities. The contrast of the clusters against the field galaxy population is increased when morphological data are used to search around bulge-dominated galaxies. In total, we present 92 overdensities above a probability threshold of 99.5%. We show, via extensive Monte Carlo simulations, that at least 60% of these overdensities are likely to be real clusters and groups and not random line-of-sight superpositions of galaxies. For each overdensity in the MDS cluster sample, we provide a richness and the average of the bulge-to-total ratio of galaxies within each system. This MDS cluster sample potentially contains some of the most distant clusters/groups ever detected, with about 25% of the overdensities having estimated redshifts z > ~0.9. We have made this sample publicly available to facilitate spectroscopic confirmation of these clusters and help more detailed studies of cluster and galaxy evolution. We also report the serendipitous discovery of a new cluster close on the sky to the rich optical cluster Cl l0016+16 at z = 0.546. This new overdensity, HST 001831+16208, may be coincident with both an X-ray source and a radio source. HST 001831+16208 is the third cluster/group discovered near to Cl 0016+16 and appears to strengthen the claims of Connolly et al. of superclustering at high redshift.

  9. [Sampling and measurement methods of the protocol design of the China Nine-Province Survey for blindness, visual impairment and cataract surgery].

    Science.gov (United States)

    Zhao, Jia-liang; Wang, Yu; Gao, Xue-cheng; Ellwein, Leon B; Liu, Hu

    2011-09-01

    To design the protocol of the China nine-province survey for blindness, visual impairment and cataract surgery to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery. The protocol design was began after accepting the task for the national survey for blindness, visual impairment and cataract surgery from the Department of Medicine, Ministry of Health, China, in November, 2005. The protocol in Beijing Shunyi Eye Study in 1996 and Guangdong Doumen County Eye Study in 1997, both supported by World Health Organization, was taken as the basis for the protocol design. The relative experts were invited to discuss and prove the draft protocol. An international advisor committee was established to examine and approve the draft protocol. Finally, the survey protocol was checked and approved by the Department of Medicine, Ministry of Health, China and Prevention Program of Blindness and Deafness, WHO. The survey protocol was designed according to the characteristics and the scale of the survey. The contents of the protocol included determination of target population and survey sites, calculation of the sample size, design of the random sampling, composition and organization of the survey teams, determination of the examinee, the flowchart of the field work, survey items and methods, diagnostic criteria of blindness and moderate and sever visual impairment, the measures of the quality control, the methods of the data management. The designed protocol became the standard and practical protocol for the survey to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery.

  10. THE ALFALFA H α SURVEY. I. PROJECT DESCRIPTION AND THE LOCAL STAR FORMATION RATE DENSITY FROM THE FALL SAMPLE

    International Nuclear Information System (INIS)

    Sistine, Angela Van; Salzer, John J.; Janowiecki, Steven; Sugden, Arthur; Giovanelli, Riccardo; Haynes, Martha P.; Jaskot, Anne E.; Wilcots, Eric M.

    2016-01-01

    The ALFALFA H α survey utilizes a large sample of H i-selected galaxies from the ALFALFA survey to study star formation (SF) in the local universe. ALFALFA H α contains 1555 galaxies with distances between ∼20 and ∼100 Mpc. We have obtained continuum-subtracted narrowband H α images and broadband R images for each galaxy, creating one of the largest homogeneous sets of H α images ever assembled. Our procedures were designed to minimize the uncertainties related to the calculation of the local SF rate density (SFRD). The galaxy sample we constructed is as close to volume-limited as possible, is a robust statistical sample, and spans a wide range of galaxy environments. In this paper, we discuss the properties of our Fall sample of 565 galaxies, our procedure for deriving individual galaxy SF rates, and our method for calculating the local SFRD. We present a preliminary value of log(SFRD[ M ⊙ yr −1 Mpc −3 ]) = −1.747 ± 0.018 (random) ±0.05 (systematic) based on the 565 galaxies in our Fall sub-sample. Compared to the weighted average of SFRD values around z ≈ 2, our local value indicates a drop in the global SFRD of a factor of 10.2 over that lookback time.

  11. Mapping species distributions with MAXENT using a geographically biased sample of presence data: a performance assessment of methods for correcting sampling bias.

    Science.gov (United States)

    Fourcade, Yoan; Engler, Jan O; Rödder, Dennis; Secondi, Jean

    2014-01-01

    MAXENT is now a common species distribution modeling (SDM) tool used by conservation practitioners for predicting the distribution of a species from a set of records and environmental predictors. However, datasets of species occurrence used to train the model are often biased in the geographical space because of unequal sampling effort across the study area. This bias may be a source of strong inaccuracy in the resulting model and could lead to incorrect predictions. Although a number of sampling bias correction methods have been proposed, there is no consensual guideline to account for it. We compared here the performance of five methods of bias correction on three datasets of species occurrence: one "virtual" derived from a land cover map, and two actual datasets for a turtle (Chrysemys picta) and a salamander (Plethodon cylindraceus). We subjected these datasets to four types of sampling biases corresponding to potential types of empirical biases. We applied five correction methods to the biased samples and compared the outputs of distribution models to unbiased datasets to assess the overall correction performance of each method. The results revealed that the ability of methods to correct the initial sampling bias varied greatly depending on bias type, bias intensity and species. However, the simple systematic sampling of records consistently ranked among the best performing across the range of conditions tested, whereas other methods performed more poorly in most cases. The strong effect of initial conditions on correction performance highlights the need for further research to develop a step-by-step guideline to account for sampling bias. However, this method seems to be the most efficient in correcting sampling bias and should be advised in most cases.

  12. Measuring the health of the Indian elderly: evidence from National Sample Survey data

    Directory of Open Access Journals (Sweden)

    Mahal Ajay

    2010-11-01

    Full Text Available Abstract Background Comparable health measures across different sets of populations are essential for describing the distribution of health outcomes and assessing the impact of interventions on these outcomes. Self-reported health (SRH is a commonly used indicator of health in household surveys and has been shown to be predictive of future mortality. However, the susceptibility of SRH to influence by individuals' expectations complicates its interpretation and undermines its usefulness. Methods This paper applies the empirical methodology of Lindeboom and van Doorslaer (2004 to investigate elderly health in India using data from the 52nd round of the National Sample Survey conducted in 1995-96 that includes both an SRH variable as well as a range of objective indicators of disability and ill health. The empirical testing was conducted on stratified homogeneous groups, based on four factors: gender, education, rural-urban residence, and region. Results We find that region generally has a significant impact on how women perceive their health. Reporting heterogeneity can arise not only from cut-point shifts, but also from differences in health effects by objective health measures. In contrast, we find little evidence of reporting heterogeneity due to differences in gender or educational status within regions. Rural-urban residence does matter in some cases. The findings are robust with different specifications of objective health indicators. Conclusions Our exercise supports the thesis that the region of residence is associated with different cut-points and reporting behavior on health surveys. We believe this is the first paper that applies the Lindeboom-van Doorslaer methodology to data on the elderly in a developing country, showing the feasibility of applying this methodology to data from many existing cross-sectional health surveys.

  13. Sampling and analysis plan for the preoperational environmental survey for the immobilized low activity waste (ILAW) project W-465

    International Nuclear Information System (INIS)

    Mitchell, R.M.

    1998-01-01

    This document provides a detailed description of the Sampling and Analysis Plan for the Preoperational Survey to be conducted at the Immobilized Low Activity Waste (ILAW) Project Site in the 200 East Area

  14. ESTIMATING PHOTOMETRIC REDSHIFTS OF QUASARS VIA THE k-NEAREST NEIGHBOR APPROACH BASED ON LARGE SURVEY DATABASES

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yanxia; Ma He; Peng Nanbo; Zhao Yongheng [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, 100012 Beijing (China); Wu Xuebing, E-mail: zyx@bao.ac.cn [Department of Astronomy, Peking University, 100871 Beijing (China)

    2013-08-01

    We apply one of the lazy learning methods, the k-nearest neighbor (kNN) algorithm, to estimate the photometric redshifts of quasars based on various data sets from the Sloan Digital Sky Survey (SDSS), the UKIRT Infrared Deep Sky Survey (UKIDSS), and the Wide-field Infrared Survey Explorer (WISE; the SDSS sample, the SDSS-UKIDSS sample, the SDSS-WISE sample, and the SDSS-UKIDSS-WISE sample). The influence of the k value and different input patterns on the performance of kNN is discussed. kNN performs best when k is different with a special input pattern for a special data set. The best result belongs to the SDSS-UKIDSS-WISE sample. The experimental results generally show that the more information from more bands, the better performance of photometric redshift estimation with kNN. The results also demonstrate that kNN using multiband data can effectively solve the catastrophic failure of photometric redshift estimation, which is met by many machine learning methods. Compared with the performance of various other methods of estimating the photometric redshifts of quasars, kNN based on KD-Tree shows superiority, exhibiting the best accuracy.

  15. ESTIMATING PHOTOMETRIC REDSHIFTS OF QUASARS VIA THE k-NEAREST NEIGHBOR APPROACH BASED ON LARGE SURVEY DATABASES

    International Nuclear Information System (INIS)

    Zhang Yanxia; Ma He; Peng Nanbo; Zhao Yongheng; Wu Xuebing

    2013-01-01

    We apply one of the lazy learning methods, the k-nearest neighbor (kNN) algorithm, to estimate the photometric redshifts of quasars based on various data sets from the Sloan Digital Sky Survey (SDSS), the UKIRT Infrared Deep Sky Survey (UKIDSS), and the Wide-field Infrared Survey Explorer (WISE; the SDSS sample, the SDSS-UKIDSS sample, the SDSS-WISE sample, and the SDSS-UKIDSS-WISE sample). The influence of the k value and different input patterns on the performance of kNN is discussed. kNN performs best when k is different with a special input pattern for a special data set. The best result belongs to the SDSS-UKIDSS-WISE sample. The experimental results generally show that the more information from more bands, the better performance of photometric redshift estimation with kNN. The results also demonstrate that kNN using multiband data can effectively solve the catastrophic failure of photometric redshift estimation, which is met by many machine learning methods. Compared with the performance of various other methods of estimating the photometric redshifts of quasars, kNN based on KD-Tree shows superiority, exhibiting the best accuracy.

  16. A random cluster survey and a convenience sample give comparable estimates of immunity to vaccine preventable diseases in children of school age in Victoria, Australia.

    Science.gov (United States)

    Kelly, Heath; Riddell, Michaela A; Gidding, Heather F; Nolan, Terry; Gilbert, Gwendolyn L

    2002-08-19

    We compared estimates of the age-specific population immunity to measles, mumps, rubella, hepatitis B and varicella zoster viruses in Victorian school children obtained by a national sero-survey, using a convenience sample of residual sera from diagnostic laboratories throughout Australia, with those from a three-stage random cluster survey. When grouped according to school age (primary or secondary school) there was no significant difference in the estimates of immunity to measles, mumps, hepatitis B or varicella. Compared with the convenience sample, the random cluster survey estimated higher immunity to rubella in samples from both primary (98.7% versus 93.6%, P = 0.002) and secondary school students (98.4% versus 93.2%, P = 0.03). Despite some limitations, this study suggests that the collection of a convenience sample of sera from diagnostic laboratories is an appropriate sampling strategy to provide population immunity data that will inform Australia's current and future immunisation policies. Copyright 2002 Elsevier Science Ltd.

  17. Test plan for evaluating the performance of the in-tank fluidic sampling system

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    The PHMC will provide Low Activity Wastes (LAW) tank wastes for final treatment by a privatization contractor from double-shell feed tanks, 241-AP-102 and 241-AP-104, Concerns about the inability of the baseline ''grab'' sampling to provide large volume samples within time constraints has led to the development of a conceptual sampling system that would be deployed in a feed tank riser, This sampling system will provide large volume, representative samples without the environmental, radiation exposure, and sample volume impacts of the current base-line ''grab'' sampling method. This test plan identifies ''proof-of-principle'' cold tests for the conceptual sampling system using simulant materials. The need for additional testing was identified as a result of completing tests described in the revision test plan document, Revision 1 outlines tests that will evaluate the performance and ability to provide samples that are representative of a tanks' content within a 95 percent confidence interval, to recovery from plugging, to sample supernatant wastes with over 25 wt% solids content, and to evaluate the impact of sampling at different heights within the feed tank. The test plan also identifies operating parameters that will optimize the performance of the sampling system

  18. Geochemical reanalysis of historical U.S. Geological Survey sediment samples from the Tonsina area, Valdez Quadrangle, Alaska

    Science.gov (United States)

    Werdon, Melanie B.; Granitto, Matthew; Azain, Jaime S.

    2015-01-01

    The State of Alaska’s Strategic and Critical Minerals (SCM) Assessment project, a State-funded Capital Improvement Project (CIP), is designed to evaluate Alaska’s statewide potential for SCM resources. The SCM Assessment is being implemented by the Alaska Division of Geological & Geophysical Surveys (DGGS), and involves obtaining new airborne-geophysical, geological, and geochemical data. As part of the SCM Assessment, thousands of historical geochemical samples from DGGS, U.S. Geological Survey (USGS), and U.S. Bureau of Mines archives are being reanalyzed by DGGS using modern, quantitative, geochemical-analytical methods. The objective is to update the statewide geochemical database to more clearly identify areas in Alaska with SCM potential. The USGS is also undertaking SCM-related geologic studies in Alaska through the federally funded Alaska Critical Minerals cooperative project. DGGS and USGS share the goal of evaluating Alaska’s strategic and critical minerals potential and together created a Letter of Agreement (signed December 2012) and a supplementary Technical Assistance Agreement (#14CMTAA143458) to facilitate the two agencies’ cooperative work. Under these agreements, DGGS contracted the USGS in Denver to reanalyze historical USGS sediment samples from Alaska. For this report, DGGS funded reanalysis of 128 historical USGS sediment samples from the statewide Alaska Geochemical Database Version 2.0 (AGDB2; Granitto and others, 2013). Samples were chosen from the Tonsina area in the Chugach Mountains, Valdez quadrangle, Alaska (fig. 1). The USGS was responsible for sample retrieval from the National Geochemical Sample Archive (NGSA) in Denver, Colorado through the final quality assurance/quality control (QA/QC) of the geochemical analyses obtained through the USGS contract lab. The new geochemical data are published in this report as a coauthored DGGS report, and will be incorporated into the statewide geochemical databases of both agencies

  19. Extending cluster Lot Quality Assurance Sampling designs for surveillance programs

    OpenAIRE

    Hund, Lauren; Pagano, Marcello

    2014-01-01

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance based on the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than ...

  20. BMR in a Brazilian adult probability sample: the Nutrition, Physical Activity and Health Survey.

    Science.gov (United States)

    Anjos, Luiz A; Wahrlich, Vivian; Vasconcellos, Mauricio Tl

    2014-04-01

    To measure BMR in a probability sample of adults from an urban city of Brazil and to compare indirectly measured BMR (BMRi) with BMR predicted from different equations. BMR data were obtained by indirect calorimetry and estimated by different predictive equations (Schofield; Harris and Benedict; Henry and Rees). Anthropometric and body composition measures were also obtained. The Nutrition, Physical Activity and Health Survey (PNAFS), a household survey conducted in Niterói, Rio de Janeiro state, Brazil. Representative sample of 529 adults (aged ≥20 years; 339 females) living in Niterói, Rio de Janeiro state, Brazil. Mean BMRi values were 5839.7 (se 73.9) kJ/d and 4758.1 (se 39.5) kJ/d for men and women, respectively. Predicted BMR by all equations was significantly higher (difference between means and 95% CI did not include zero) than BMRi in both men and women of all ages. Overall bias in BMR (predicted BMR minus BMRi) using the Schofield equations (overestimation of about 20%) was higher than when using the Henry and Rees equations (13% and 16% overestimation for males and females, respectively). The percentage of individuals whose BMR predicted by the Schofield equations fell within 10% of BMRi was very low (7.8% and 14.1% of males nd females, respectively). Current available predictive equations of BMR are not adequate to estimate BMR in Brazilians living in Niterói, Rio de Janeiro, Brazil.

  1. THE BOSS EMISSION-LINE LENS SURVEY (BELLS). I. A LARGE SPECTROSCOPICALLY SELECTED SAMPLE OF LENS GALAXIES AT REDSHIFT {approx}0.5

    Energy Technology Data Exchange (ETDEWEB)

    Brownstein, Joel R.; Bolton, Adam S.; Pandey, Parul [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Schlegel, David J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Eisenstein, Daniel J. [Harvard College Observatory, 60 Garden Street, MS 20, Cambridge, MA 02138 (United States); Kochanek, Christopher S. [Department of Astronomy and Center for Cosmology and Astroparticle Physics, Ohio State University, Columbus, OH 43210 (United States); Connolly, Natalia [Department of Physics, Hamilton College, Clinton, NY 13323 (United States); Maraston, Claudia [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth PO1 3FX (United Kingdom); Seitz, Stella [University Observatory Munich, Scheinstrasse 1, 81679 Muenchen (Germany); Wake, David A. [Department of Astronomy, Yale University, New Haven, CT 06520 (United States); Wood-Vasey, W. Michael [Pittsburgh Center for Particle Physics, Astrophysics, and Cosmology (PITT-PACC), Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Brinkmann, Jon [Apache Point Observatory, P.O. Box 59, Sunspot, NM 88349 (United States); Schneider, Donald P. [Department of Astronomy and Astrophysics and Institute for Gravitation and the Cosmos, Pennsylvania State University, University Park, PA 16802 (United States); Weaver, Benjamin A. [Center for Cosmology and Particle Physics, New York University, New York, NY 10003 (United States)

    2012-01-01

    We present a catalog of 25 definite and 11 probable strong galaxy-galaxy gravitational lens systems with lens redshifts 0.4 {approx}< z {approx}< 0.7, discovered spectroscopically by the presence of higher-redshift emission lines within the Baryon Oscillation Spectroscopic Survey (BOSS) of luminous galaxies, and confirmed with high-resolution Hubble Space Telescope (HST) images of 44 candidates. Our survey extends the methodology of the Sloan Lens Advanced Camera for Surveys survey (SLACS) to higher redshift. We describe the details of the BOSS spectroscopic candidate detections, our HST ACS image processing and analysis methods, and our strong gravitational lens modeling procedure. We report BOSS spectroscopic parameters and ACS photometric parameters for all candidates, and mass-distribution parameters for the best-fit singular isothermal ellipsoid models of definite lenses. Our sample to date was selected using only the first six months of BOSS survey-quality spectroscopic data. The full five-year BOSS database should produce a sample of several hundred strong galaxy-galaxy lenses and in combination with SLACS lenses at lower redshift, strongly constrain the redshift evolution of the structure of elliptical, bulge-dominated galaxies as a function of luminosity, stellar mass, and rest-frame color, thereby providing a powerful test for competing theories of galaxy formation and evolution.

  2. Survey of statistical and sampling needs for environmental monitoring of commercial low-level radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    Eberhardt, L.L.; Thomas, J.M.

    1986-07-01

    This project was designed to develop guidance for implementing 10 CFR Part 61 and to determine the overall needs for sampling and statistical work in characterizing, surveying, monitoring, and closing commercial low-level waste sites. When cost-effectiveness and statistical reliability are of prime importance, then double sampling, compositing, and stratification (with optimal allocation) are identified as key issues. If the principal concern is avoiding questionable statistical practice, then the applicability of kriging (for assessing spatial pattern), methods for routine monitoring, and use of standard textbook formulae in reporting monitoring results should be reevaluated. Other important issues identified include sampling for estimating model parameters and the use of data from left-censored (less than detectable limits) distributions

  3. Department of Defense Physical Strength and Job Performance Survey: Report on the Ability of First-Term Enlisted Personnel to Perform Physically Demanding Work

    National Research Council Canada - National Science Library

    Cooper, Barrie

    2002-01-01

    ... to perform physically demanding tasks. Within each service, 10 occupational specialties with moderate to high strength requirements were identified as the target populations for the DOD Physical Strength mid Job Performance Survey...

  4. Weak lensing magnification in the Dark Energy Survey Science Verification data

    Science.gov (United States)

    Garcia-Fernandez, M.; Sanchez, E.; Sevilla-Noarbe, I.; Suchyta, E.; Huff, E. M.; Gaztanaga, E.; Aleksić, J.; Ponce, R.; Castander, F. J.; Hoyle, B.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Benoit-Lévy, A.; Bernstein, G. M.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Diehl, H. T.; Eifler, T. F.; Evrard, A. E.; Fernandez, E.; Flaugher, B.; Fosalba, P.; Frieman, J.; García-Bellido, J.; Gerdes, D. W.; Giannantonio, T.; Gruen, D.; Gruendl, R. A.; Gschwend, J.; Gutierrez, G.; James, D. J.; Jarvis, M.; Kirk, D.; Krause, E.; Kuehn, K.; Kuropatkin, N.; Lahav, O.; Lima, M.; MacCrann, N.; Maia, M. A. G.; March, M.; Marshall, J. L.; Melchior, P.; Miquel, R.; Mohr, J. J.; Plazas, A. A.; Romer, A. K.; Roodman, A.; Rykoff, E. S.; Scarpine, V.; Schubnell, M.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Tarle, G.; Thomas, D.; Walker, A. R.; Wester, W.; DES Collaboration

    2018-05-01

    In this paper, the effect of weak lensing magnification on galaxy number counts is studied by cross-correlating the positions of two galaxy samples, separated by redshift, using the Dark Energy Survey Science Verification data set. This analysis is carried out for galaxies that are selected only by its photometric redshift. An extensive analysis of the systematic effects, using new methods based on simulations is performed, including a Monte Carlo sampling of the selection function of the survey.

  5. Enantioselective analysis of chloramphenicol residues in honey samples by chiral LC-MS/MS and results of a honey survey.

    Science.gov (United States)

    Rimkus, Gerhard G; Hoffmann, Dirk

    2017-06-01

    Chloramphenicol (CAP) is a broad-spectrum antibiotic used widely in both human and veterinary medication. Since 1994, CAP has not been authorised for use in food-producing animals in the European Union due to several adverse effects. A minimum required performance level (MRPL) of 0.3 µg kg - 1 was established in 2003. The CAP molecule contains two asymmetric centres, thus in total four para-CAP stereoisomers exist. Only the RR-CAP enantiomer is bioactive, having significant antimicrobial activity. For the first time a chiral LC-MS/MS method is reported to identify and quantify the four CAP enantiomers at residue levels in honey samples. The method was validated at two concentration levels. The decision limits (CCα) and detection capabilities (CCß) were well below 0.3 µg kg - 1 , with limits of quantification (LOQs) between 0.08 and 0.12 µg kg - 1 for all four enantiomers. The method provides a sensitive and reliable analysis of CAP enantiomers in honey, and proved its robustness during the daily routine analyses of numerous honey samples. In an internal honey survey, in total 40 honey samples from different geographical regions with identified CAP residues at or above the MRPL were reanalysed by chiral LC-MS/MS. In nine honey samples only the bioactive RR-CAP was detected as anticipated. However, in all other 31 honey samples the non-bioactive SS-CAP was also identified and quantified unambiguously. In 10 of these samples, mixtures of RR- and SS-CAP were analysed, and in 21 samples only the SS-CAP enantiomer, with concentrations up to 2.2 µg kg - 1 . Most of these samples are honeys from Ukraine and Eastern Europe. This is the first report of SS-CAP residues in food samples. The potential sources for these findings are discussed and the need of further systematic studies emphasised. It is recommended to examine in more depth the toxicological profile of the individual CAP stereoisomers.

  6. Sloan Digital Sky Survey: Performance and Lessons Learned from the First Two Years of Operations

    Science.gov (United States)

    Boroski, William N.; Gunn, James E.; Kron, Richard G.; Peoples, John, Jr.

    2002-12-01

    Over a 5-year observing period, the Sloan Digital Sky Survey (SDSS) will acquire data to construct a digital 5-color photometric map of the Northern Galactic sky to about 23rd magnitude, and a correspondingly large and homogeneous spectroscopic survey. The SDSS is in a unique class of projects, in that all aspects of the SDSS infrastructure, from the telescopes and instruments, to software and operations staffing, were designed and assembled specifically to conduct this Survey. To ensure success, observing operations are run in production mode and performance metrics are used to measure progress over time. The methodology of preparing the performance baseline plan, and an assessment of Survey progress after two full years of operation, are reviewed and some lessons learned discussed. In particular, the SDSS has benefited greatly by asking peers in the field to participate in external reviews that periodically assess performance and offer independent, fresh views of potential areas of concerns. Additionally, difficulties caused by the absence of an experienced systems-engineering staff during the final phase of construction and commissioning are reviewed. The challenges of building a production machine out of complex and state-of-the-art sub-systems cannot be overstated. In the case of the SDSS, insufficient systems engineering led to problems meeting initial image quality requirements, primarily because of problems with the thermal performance of the telescope and its environment. A concerted campaign to deal with these issues was successful, but that success came rather later than we would have liked. The improvements made to address the situation, and the resulting increase in operational performance, are discussed.

  7. Use of methods for specifying the target difference in randomised controlled trial sample size calculations: Two surveys of trialists' practice.

    Science.gov (United States)

    Cook, Jonathan A; Hislop, Jennifer M; Altman, Doug G; Briggs, Andrew H; Fayers, Peter M; Norrie, John D; Ramsay, Craig R; Harvey, Ian M; Vale, Luke D

    2014-06-01

    the most recent trial, the target difference was usually one viewed as important by a stakeholder group, mostly also viewed as a realistic difference given the interventions under evaluation, and sometimes one that led to an achievable sample size. The response rates achieved were relatively low despite the surveys being short, well presented, and having utilised reminders. Substantial variations in practice exist with awareness, use, and willingness to recommend methods varying substantially. The findings support the view that sample size calculation is a more complex process than would appear to be the case from trial reports and protocols. Guidance on approaches for sample size estimation may increase both awareness and use of appropriate formal methods. © The Author(s), 2014.

  8. Virological Sampling of Inaccessible Wildlife with Drones.

    Science.gov (United States)

    Geoghegan, Jemma L; Pirotta, Vanessa; Harvey, Erin; Smith, Alastair; Buchmann, Jan P; Ostrowski, Martin; Eden, John-Sebastian; Harcourt, Robert; Holmes, Edward C

    2018-06-02

    There is growing interest in characterizing the viromes of diverse mammalian species, particularly in the context of disease emergence. However, little is known about virome diversity in aquatic mammals, in part due to difficulties in sampling. We characterized the virome of the exhaled breath (or blow) of the Eastern Australian humpback whale ( Megaptera novaeangliae ). To achieve an unbiased survey of virome diversity, a meta-transcriptomic analysis was performed on 19 pooled whale blow samples collected via a purpose-built Unmanned Aerial Vehicle (UAV, or drone) approximately 3 km off the coast of Sydney, Australia during the 2017 winter annual northward migration from Antarctica to northern Australia. To our knowledge, this is the first time that UAVs have been used to sample viruses. Despite the relatively small number of animals surveyed in this initial study, we identified six novel virus species from five viral families. This work demonstrates the potential of UAVs in studies of virus disease, diversity, and evolution.

  9. Contributions to sampling statistics

    CERN Document Server

    Conti, Pier; Ranalli, Maria

    2014-01-01

    This book contains a selection of the papers presented at the ITACOSM 2013 Conference, held in Milan in June 2013. ITACOSM is the bi-annual meeting of the Survey Sampling Group S2G of the Italian Statistical Society, intended as an international  forum of scientific discussion on the developments of theory and application of survey sampling methodologies and applications in human and natural sciences. The book gathers research papers carefully selected from both invited and contributed sessions of the conference. The whole book appears to be a relevant contribution to various key aspects of sampling methodology and techniques; it deals with some hot topics in sampling theory, such as calibration, quantile-regression and multiple frame surveys, and with innovative methodologies in important topics of both sampling theory and applications. Contributions cut across current sampling methodologies such as interval estimation for complex samples, randomized responses, bootstrap, weighting, modeling, imputati...

  10. THE ALFALFA H α SURVEY. I. PROJECT DESCRIPTION AND THE LOCAL STAR FORMATION RATE DENSITY FROM THE FALL SAMPLE

    Energy Technology Data Exchange (ETDEWEB)

    Sistine, Angela Van [Department of Physics, University of Wisconsin-Milwaukee, Milwaukee, WI 53211 (United States); Salzer, John J.; Janowiecki, Steven [Department of Astronomy, Indiana University, Bloomington, IN 47405 (United States); Sugden, Arthur [Department of Endocrinology, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA 02115 (United States); Giovanelli, Riccardo; Haynes, Martha P. [Center for Astrophysics and Planetary Science, Cornell University, Ithaca, NY 14853 (United States); Jaskot, Anne E. [Department of Astronomy, Smith College, Northampton, MA 01063 (United States); Wilcots, Eric M. [Department of Astronomy, University of Wisconsin-Madison, Madison, WI 53706 (United States)

    2016-06-10

    The ALFALFA H α survey utilizes a large sample of H i-selected galaxies from the ALFALFA survey to study star formation (SF) in the local universe. ALFALFA H α contains 1555 galaxies with distances between ∼20 and ∼100 Mpc. We have obtained continuum-subtracted narrowband H α images and broadband R images for each galaxy, creating one of the largest homogeneous sets of H α images ever assembled. Our procedures were designed to minimize the uncertainties related to the calculation of the local SF rate density (SFRD). The galaxy sample we constructed is as close to volume-limited as possible, is a robust statistical sample, and spans a wide range of galaxy environments. In this paper, we discuss the properties of our Fall sample of 565 galaxies, our procedure for deriving individual galaxy SF rates, and our method for calculating the local SFRD. We present a preliminary value of log(SFRD[ M {sub ⊙} yr{sup −1} Mpc{sup −3}]) = −1.747 ± 0.018 (random) ±0.05 (systematic) based on the 565 galaxies in our Fall sub-sample. Compared to the weighted average of SFRD values around z ≈ 2, our local value indicates a drop in the global SFRD of a factor of 10.2 over that lookback time.

  11. Survey research.

    Science.gov (United States)

    Alderman, Amy K; Salem, Barbara

    2010-10-01

    Survey research is a unique methodology that can provide insight into individuals' perspectives and experiences and can be collected on a large population-based sample. Specifically, in plastic surgery, survey research can provide patients and providers with accurate and reproducible information to assist with medical decision-making. When using survey methods in research, researchers should develop a conceptual model that explains the relationships of the independent and dependent variables. The items of the survey are of primary importance. Collected data are only useful if they accurately measure the concepts of interest. In addition, administration of the survey must follow basic principles to ensure an adequate response rate and representation of the intended target sample. In this article, the authors review some general concepts important for successful survey research and discuss the many advantages this methodology has for obtaining limitless amounts of valuable information.

  12. Sample Loss and Survey Bias in Estimates of Social Security Beneficiaries: A Tale of Two Surveys.

    OpenAIRE

    John L. Czajka; James Mabli; Scott Cody

    2008-01-01

    Data from the Census Bureau’s Survey of Income and Program Participation (SIPP) and the Current Population Survey (CPS) provide information on current and potential beneficiaries served by Social Security Administration (SSA) programs. SSA also links administrative records to the records of survey respondents who provide Social Security numbers. These matched data expand the content of the SIPP and CPS files to fields available only through SSA and Internal Revenue Service records—such as l...

  13. Reproductive performance in a select sample of dairy herds.

    Science.gov (United States)

    Ferguson, James D; Skidmore, Andrew

    2013-02-01

    Sixteen herds were selected from a pool of 64 herds nominated by consultants for participation in a national survey to demonstrate excellence in reproductive performance. For inclusion in the survey, herds had to have comprehensive records in a farm computer database or participate in a Dairy Herd Improvement Association record system and have superior reproductive performance as judged by the herd advisor. Herd managers were asked to fill out a questionnaire to describe their reproductive management practices and provide herd records for data analysis. Reproductive analysis was based on individual cow records for active and cull dairy cows that calved during the calendar year 2010. Breeding records by cow were used to calculate indices for insemination rate (IR), conception rate (CR), pregnancy rate (PR), and culling. Herds ranged in size from 262 to 6,126 lactating and dry cows, with a mean of 1,654 [standard deviation (SD) 1,494] cows. Mean days to first insemination (DFS) was 71.2d (SD 4.7d), and IR for first insemination was 86.9%. Mean days between inseminations were 33.4d (SD 3.1d), and 15.4% of insemination intervals were greater than 48 d (range: 7.2 to 21.5%). First-service conception rate was 44.4% (SD 4.8%) across all herds and ranged from 37.5 to 51.8%. Mean PR was 32.0% (SD 3.9%) with a range of 26.5 to 39.4%. Lactation cull rate was 32.2% (SD 12.4%) with a range from 13.6 to 58.1%. Compared with mean data and SD for herds in the Raleigh Dairy Herd Improvement Association system, mean indices for these herds ranked them in the 99 th percentile for IR (using heat detection rate as comparison), 99 th percentile for PR, the bottom 18.6 percentile for DFS, and around the 50th percentile for CR. This suggests that excellent herd reproductive performance was associated with reproductive management that resulted in high insemination rates combined with average CR. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights

  14. Influence of tow duration on catch performance of trawl survey in the Mediterranean Sea.

    Directory of Open Access Journals (Sweden)

    Antonello Sala

    Full Text Available The aim of this study was to assess the effect of tow duration on catch per unit of swept area (CPUE, trawl catch performance, and the proportion of the species caught in a trawl survey. Longer tows are expected to have a greater probability of catching species. An average of 26 species were caught in the first 30 minutes, whereas only about one additional species was caught in the next 30 minutes in longer tows. The shorter tows involved a decrement in catch weight for 11 of the 12 target species sampled, demonstrating that tow duration did affect catch per unit of swept area CPUE. The shorter tows were associated with a significant reduction of the overall CPUE in terms of weight of the main target species and of the total catch (circa 60%. The same strong reduction of around 70% was found in particular for European hake (Merluccius merluccius and surmullet (Mullus spp and 50% for Nephrops (Nephrops norvegicus. The shorter tows were less efficient in catching large-sized hake, surmullet, Nephrops, Atlantic horse mackerel (Trachurus trachurus, and poor cod (Trisopterus minutus, even though the difference was significant only for Nephrops. Regardless of the p-value statistic, these findings suggest that the continuity of survey time series would be severely impaired by changing tow duration. Further work is required to explore a way to reduce tow duration without reducing CPUE.

  15. Overestimation of test performance by ROC analysis: Effect of small sample size

    International Nuclear Information System (INIS)

    Seeley, G.W.; Borgstrom, M.C.; Patton, D.D.; Myers, K.J.; Barrett, H.H.

    1984-01-01

    New imaging systems are often observer-rated by ROC techniques. For practical reasons the number of different images, or sample size (SS), is kept small. Any systematic bias due to small SS would bias system evaluation. The authors set about to determine whether the area under the ROC curve (AUC) would be systematically biased by small SS. Monte Carlo techniques were used to simulate observer performance in distinguishing signal (SN) from noise (N) on a 6-point scale; P(SN) = P(N) = .5. Four sample sizes (15, 25, 50 and 100 each of SN and N), three ROC slopes (0.8, 1.0 and 1.25), and three intercepts (0.8, 1.0 and 1.25) were considered. In each of the 36 combinations of SS, slope and intercept, 2000 runs were simulated. Results showed a systematic bias: the observed AUC exceeded the expected AUC in every one of the 36 combinations for all sample sizes, with the smallest sample sizes having the largest bias. This suggests that evaluations of imaging systems using ROC curves based on small sample size systematically overestimate system performance. The effect is consistent but subtle (maximum 10% of AUC standard deviation), and is probably masked by the s.d. in most practical settings. Although there is a statistically significant effect (F = 33.34, P<0.0001) due to sample size, none was found for either the ROC curve slope or intercept. Overestimation of test performance by small SS seems to be an inherent characteristic of the ROC technique that has not previously been described

  16. Tumescent liposuction report performance measurement initiative: national survey results.

    Science.gov (United States)

    Hanke, William; Cox, Sue Ellen; Kuznets, Naomi; Coleman, William P

    2004-07-01

    This study was created by the Accreditation Association for Ambulatory Health Care Institute for Quality Improvement to measure clinical performance and improvement opportunities for physicians and ambulatory health-care organizations. Data were collected prospectively between February 2001 and August 2002. Thirty-nine study centers participated, and 688 patients who had tumescent liposuction were surveyed and followed for 6 months. The objective was to determine patient satisfaction with tumescent liposuction and examine current liposuction practice and the safety of tumescent liposuction in a representative cohort of patients. The Accreditation Association for Ambulatory Health Care Institute for Quality Improvement collected prospective data from February 2001 to August 2002 from 68 organizations registered for this study. Ultimately 39 organizations submitted 688 useable cases performed totally with local anesthesia, "tumescent technique." The overall clinical complication rate found in the Accreditation Association for Ambulatory Health Care Institute for Quality Improvement study was 0.7% (5 of 702). There was a minor complication rate of 0.57%. The major complication rate was 0.14% with one patient requiring hospitalization. Seventy-five percent of the patients reported no discomfort during their procedures. Of the 59% of patients who responded to a 6-month postoperative survey, 91% were positive about their decision to have liposuction (rating of 4 or 5 on a scale of 1-5) and 84% had high levels (4 or 5 on a scale of 1-5) of overall satisfaction with the procedure. Our findings are consistent with others in that tumescent liposuction is a safe procedure with a low complication rate and high patient satisfaction.

  17. Sensor performance as a function of sampling (d) and optical blur (Fλ)

    NARCIS (Netherlands)

    Bijl, P.; Hogervorst, M.A.

    2009-01-01

    Detector sampling and optical blur are two major factors affecting Target Acquisition (TA) performance with modern EO and IR systems. In order to quantify their relative significance, we simulated five realistic LWIR and MWIR sensors from very under-sampled (detector pitch d >> diffraction blur Fλ)

  18. Engagement with HIV prevention treatment and care among female sex workers in Zimbabwe: a respondent driven sampling survey.

    Science.gov (United States)

    Cowan, Frances M; Mtetwa, Sibongile; Davey, Calum; Fearon, Elizabeth; Dirawo, Jeffrey; Wong-Gruenwald, Ramona; Ndikudze, Theresa; Chidiya, Samson; Benedikt, Clemens; Busza, Joanna; Hargreaves, James R

    2013-01-01

    To determine the HIV prevalence and extent of engagement with HIV prevention and care among a representative sample of Zimbabwean sex workers working in Victoria Falls, Hwange and Mutare. Respondent driven sampling (RDS) surveys conducted at each site. Sex workers were recruited using respondent driven sampling with each respondent limited to recruiting 2 peers. Participants completed an interviewer-administered questionnaire and provided a finger prick blood sample for HIV antibody testing. Statistical analysis took account of sampling method. 870 women were recruited from the three sites. HIV prevalence was between 50 and 70%. Around half of those confirmed HIV positive were aware of their HIV status and of those 50-70% reported being enrolled in HIV care programmes. Overall only 25-35% of those with laboratory-confirmed HIV were accessing antiretroviral therapy. Among those reporting they were HIV negative, 21-28% reported having an HIV test in the last 6 months. Of those tested HIV negative, most (65-82%) were unaware of their status. Around two-thirds of sex workers reported consistent condom use with their clients. As in other settings, sex workers reported high rates of gender based violence and police harassment. This survey suggests that prevalence of HIV is high among sex workers in Zimbabwe and that their engagement with prevention, treatment and care is sub-optimal. Intensifying prevention and care interventions for sex workers has the potential to markedly reduce HIV and social risks for sex workers, their clients and the general population in Zimbabwe and elsewhere in the region.

  19. Methodology of the fasting sub-sample from the Mexican Health Survey, 2000 Metodología de la submuestra de suero de la Encuesta Nacional de Salud 2000

    OpenAIRE

    Simón Barquera; Citlalli Carrión; Ismael Campos; Juan Espinosa; Juan Rivera; Gustavo Olaiz-Fernández

    2007-01-01

    OBJECTIVE: To report the comparative results of the sub-sample of fasting adults selected for the biochemical measurement of cardiovascular risk factors and the rest of the Mexican Health Survey (MHS) (2000) participants. MATERIAL AND METHODS: The nationally representative, cross-sectional Mexican Health Survey (2000) was analyzed. Survey participants reporting a fasting state period of 9- to 12-h were included in a sub-sample (n= 2 535) and compared with all other participants (n= 41 126). P...

  20. SDSS-II SUPERNOVA SURVEY: AN ANALYSIS OF THE LARGEST SAMPLE OF TYPE IA SUPERNOVAE AND CORRELATIONS WITH HOST-GALAXY SPECTRAL PROPERTIES

    International Nuclear Information System (INIS)

    Wolf, Rachel C.; Gupta, Ravi R.; Sako, Masao; Fischer, John A.; March, Marisa C.; Fischer, Johanna-Laina; D’Andrea, Chris B.; Smith, Mathew; Kessler, Rick; Scolnic, Daniel M.; Jha, Saurabh W.; Campbell, Heather; Nichol, Robert C.; Olmstead, Matthew D.; Richmond, Michael; Schneider, Donald P.

    2016-01-01

    Using the largest single-survey sample of Type Ia supernovae (SNe Ia) to date, we study the relationship between properties of SNe Ia and those of their host galaxies, focusing primarily on correlations with Hubble residuals (HRs). Our sample consists of 345 photometrically classified or spectroscopically confirmed SNe Ia discovered as part of the SDSS-II Supernova Survey (SDSS-SNS). This analysis utilizes host-galaxy spectroscopy obtained during the SDSS-I/II spectroscopic survey and from an ancillary program on the SDSS-III Baryon Oscillation Spectroscopic Survey that obtained spectra for nearly all host galaxies of SDSS-II SN candidates. In addition, we use photometric host-galaxy properties from the SDSS-SNS data release such as host stellar mass and star formation rate. We confirm the well-known relation between HR and host-galaxy mass and find a 3.6 σ significance of a nonzero linear slope. We also recover correlations between HR and host-galaxy gas-phase metallicity and specific star formation rate as they are reported in the literature. With our large data set, we examine correlations between HR and multiple host-galaxy properties simultaneously and find no evidence of a significant correlation. We also independently analyze our spectroscopically confirmed and photometrically classified SNe Ia and comment on the significance of similar combined data sets for future surveys.

  1. Surface radiation survey and soil sampling of the 300-FF-1 operable unit, Hanford Site, southeastern Washington: A case study

    International Nuclear Information System (INIS)

    Teel, S.S.; Olsen, K.B.

    1990-10-01

    The methods used for conducting a radiological characterization of the soil surface for the Phase I Remedial Investigation of a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) site is presented via a case study. The study site is an operable unit (300-FF-1) located in and adjacent to the 300 Area of the US Department of Energy's Hanford Site in southeastern Washington State. The operable unit contains liquid and solid waste disposal facilities associated with nuclear fuels fabrication. Continuous surface radiation surveying and soil sampling of selected locations were conducted. Contamination was found in several locations within the operable unit including areas near the liquid and solid waste disposal facilities. Instruments used during surveying included portable beta/gamma (P-11) detectors, and the Ultrasonic Ranging and Data System using an NaI (Tl) detector. Laboratory analyses results indicate that above-background radiation levels were primarily due to the presence of uranium. Both types of field instruments used in the study were effective in detecting surface contamination from radionuclides; however, each had specific advantages. Guidelines are presented for the optimum use of these instruments when performing a radiological characterization of the soil surface. 4 refs., 3 figs., 3 tabs

  2. Lessons learnt on recruitment and fieldwork from a pilot European human biomonitoring survey

    DEFF Research Database (Denmark)

    Fiddicke, Ulrike; Becker, Kerstin; Schwedler, Gerda

    2015-01-01

    , training of interviewers in all issues of recruitment, fieldwork and sampling through information material and training sessions is crucial. A survey involving many European countries needs time for preparation and conduct. Materials for quality control prepared for all steps of recruitment, fieldwork...... biomonitoring (HBM) survey which came into action as the pilot study DEMOCOPHES (DEMOnstration of a study to COordinate and Perform Human biomonitoring on a European Scale). Seventeen European countries conducted a survey with harmonized instruments for, inter alia, recruitment, fieldwork and sampling......, in autumn/winter 2011/2012. Based on the countries' experiences of conducting the pilot study, following lessons learnt were compiled: the harmonized fieldwork instruments (basic questionnaire, urine and hair sampling) turned out to be very valuable for future HBM surveys on the European scale. A school...

  3. Training, Innovation and Business Performance: An Analysis of the Business Longitudinal Survey.

    Science.gov (United States)

    Dockery, A. Michael

    This paper uses the Australian Bureau of Statistics' Business Longitudinal Survey to explore relationships between training, innovation, and firm performance for Australian businesses with less than 200 employees. The longitudinal nature of the data is used to test various hypotheses about the nature of the link between training, business changes,…

  4. Results of the radiological survey at Two Mile Creek, Tonawanda, New York (TNY002)

    International Nuclear Information System (INIS)

    Murray, M.E.; Rodriguez, R.E.; Uziel, M.S.

    1997-08-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at Two Mile Creek, Tonawanda, New York. The survey was performed in November 1991 and May 1996. The purpose of the survey was to determine if radioactive materials from work performed under government contract at the Linde Air Products Division of Union Carbide Corporation, Tonawanda, New York, had been transported into the creek. The survey included a surface gamma scan in accessible areas near the creek and the collection of soil, sediment, and core samples for radionuclide analyses. Survey results indicate that no significant material originating at the Linde plant is presently in the creek. Three of the 1991 soil sample locations on the creek bank and one near the lake contained slightly elevated concentrations of 238 U with radionuclide distributions similar to that found in materials resulting from former processing activities at the Linde site

  5. Comparison of two mammalian surveys made with camera traps in southeastern Brazil, focusing the abundance of wild mammals and domestic dogs.

    Science.gov (United States)

    Carvalho, W D; Adania, C H; Esbérard, C E L

    2013-02-01

    Sampling allows assessing the impact of human activities on mammal communities. It is also possible to assess the accuracy of different sampling methods, especially when the sampling effort is similar. The present study aimed at comparing two mammalian surveys carried out over a three-year interval, in terms of sampling effort, capture success, abundance of domestic dogs, impact of human activities, and relative biomass using camera traps, in the Serra do Japi Biological Reserve and surroundings, located in Jundiaí, state of São Paulo, southeastern Brazil. The total richness recorded was 13 species, one domestic and 12 wild mammals. Sampling effort in both surveys was similar, but capture success and number of captures differed. The abundance of wild mammals and dogs did also differ between surveys. There was a highly significant correlation between abundance of wild mammals and capture effort for the survey performed in 2006/2007, but not for the survey performed in 2009/2010. The difference between samples may be related to human disturbance, since the number of domestic mammals photographed was higher in the second survey, three years after the first survey. Despite being a reserve, the area is still under pressure from urbanization, biological invasion, environmental degradation, and hunting, which may reduce the abundance of wild mammals.

  6. Breaking Free of Sample Size Dogma to Perform Innovative Translational Research

    Science.gov (United States)

    Bacchetti, Peter; Deeks, Steven G.; McCune, Joseph M.

    2011-01-01

    Innovative clinical and translational research is often delayed or prevented by reviewers’ expectations that any study performed in humans must be shown in advance to have high statistical power. This supposed requirement is not justifiable and is contradicted by the reality that increasing sample size produces diminishing marginal returns. Studies of new ideas often must start small (sometimes even with an N of 1) because of cost and feasibility concerns, and recent statistical work shows that small sample sizes for such research can produce more projected scientific value per dollar spent than larger sample sizes. Renouncing false dogma about sample size would remove a serious barrier to innovation and translation. PMID:21677197

  7. How Big of a Problem is Analytic Error in Secondary Analyses of Survey Data?

    Directory of Open Access Journals (Sweden)

    Brady T West

    Full Text Available Secondary analyses of survey data collected from large probability samples of persons or establishments further scientific progress in many fields. The complex design features of these samples improve data collection efficiency, but also require analysts to account for these features when conducting analysis. Unfortunately, many secondary analysts from fields outside of statistics, biostatistics, and survey methodology do not have adequate training in this area, and as a result may apply incorrect statistical methods when analyzing these survey data sets. This in turn could lead to the publication of incorrect inferences based on the survey data that effectively negate the resources dedicated to these surveys. In this article, we build on the results of a preliminary meta-analysis of 100 peer-reviewed journal articles presenting analyses of data from a variety of national health surveys, which suggested that analytic errors may be extremely prevalent in these types of investigations. We first perform a meta-analysis of a stratified random sample of 145 additional research products analyzing survey data from the Scientists and Engineers Statistical Data System (SESTAT, which describes features of the U.S. Science and Engineering workforce, and examine trends in the prevalence of analytic error across the decades used to stratify the sample. We once again find that analytic errors appear to be quite prevalent in these studies. Next, we present several example analyses of real SESTAT data, and demonstrate that a failure to perform these analyses correctly can result in substantially biased estimates with standard errors that do not adequately reflect complex sample design features. Collectively, the results of this investigation suggest that reviewers of this type of research need to pay much closer attention to the analytic methods employed by researchers attempting to publish or present secondary analyses of survey data.

  8. How Big of a Problem is Analytic Error in Secondary Analyses of Survey Data?

    Science.gov (United States)

    West, Brady T.; Sakshaug, Joseph W.; Aurelien, Guy Alain S.

    2016-01-01

    Secondary analyses of survey data collected from large probability samples of persons or establishments further scientific progress in many fields. The complex design features of these samples improve data collection efficiency, but also require analysts to account for these features when conducting analysis. Unfortunately, many secondary analysts from fields outside of statistics, biostatistics, and survey methodology do not have adequate training in this area, and as a result may apply incorrect statistical methods when analyzing these survey data sets. This in turn could lead to the publication of incorrect inferences based on the survey data that effectively negate the resources dedicated to these surveys. In this article, we build on the results of a preliminary meta-analysis of 100 peer-reviewed journal articles presenting analyses of data from a variety of national health surveys, which suggested that analytic errors may be extremely prevalent in these types of investigations. We first perform a meta-analysis of a stratified random sample of 145 additional research products analyzing survey data from the Scientists and Engineers Statistical Data System (SESTAT), which describes features of the U.S. Science and Engineering workforce, and examine trends in the prevalence of analytic error across the decades used to stratify the sample. We once again find that analytic errors appear to be quite prevalent in these studies. Next, we present several example analyses of real SESTAT data, and demonstrate that a failure to perform these analyses correctly can result in substantially biased estimates with standard errors that do not adequately reflect complex sample design features. Collectively, the results of this investigation suggest that reviewers of this type of research need to pay much closer attention to the analytic methods employed by researchers attempting to publish or present secondary analyses of survey data. PMID:27355817

  9. Summary of microsatellite instability test results from laboratories participating in proficiency surveys: proficiency survey results from 2005 to 2012.

    Science.gov (United States)

    Boyle, Theresa A; Bridge, Julia A; Sabatini, Linda M; Nowak, Jan A; Vasalos, Patricia; Jennings, Lawrence J; Halling, Kevin C

    2014-03-01

    The College of American Pathologists surveys are the largest laboratory peer comparison programs in the world. These programs allow laboratories to regularly evaluate their performance and improve the accuracy of the patient test results they provide. Proficiency testing is offered twice a year to laboratories performing microsatellite instability testing. These surveys are designed to emulate clinical practice, and some surveys have more challenging cases to encourage the refinement of laboratory practices. This report summarizes the results and trends in microsatellite instability proficiency testing from participating laboratories from the inception of the program in 2005 through 2012. We compiled and analyzed data for 16 surveys of microsatellite instability proficiency testing during 2005 to 2012. The number of laboratories participating in the microsatellite instability survey has more than doubled from 42 to 104 during the 8 years analyzed. An average of 95.4% of the laboratories correctly classified each of the survey test samples from the 2005A through 2012B proficiency challenges. In the 2011B survey, a lower percentage of laboratories (78.4%) correctly classified the specimen, possibly because of overlooking subtle changes of microsatellite instability and/or failing to enrich the tumor content of the specimen to meet the limit of detection of their assay. In general, laboratories performed well in microsatellite instability testing. This testing will continue to be important in screening patients with colorectal and other cancers for Lynch syndrome and guiding the management of patients with sporadic colorectal cancer.

  10. Infall and outflow motions towards a sample of massive star-forming regions from the RMS survey

    Science.gov (United States)

    Cunningham, N.; Lumsden, S. L.; Moore, T. J. T.; Maud, L. T.; Mendigutía, I.

    2018-06-01

    We present the results of an outflow and infall survey towards a distance-limited sample of 31 massive star-forming regions drawn from the Red MSX source (RMS) survey. The presence of young, active outflows is identified from SiO (8-7) emission and the infall dynamics are explored using HCO+/H13CO+ (4-3) emission. We investigate if the infall and outflow parameters vary with source properties, exploring whether regions hosting potentially young active outflows show similarities or differences with regions harbouring more evolved, possibly momentum-driven, `fossil' outflows. SiO emission is detected towards approximately 46 per cent of the sources. When considering sources with and without an SiO detection (i.e. potentially active and fossil outflows, respectively), only the 12CO outflow velocity shows a significant difference between samples, indicating SiO is more prevalent towards sources with higher outflow velocities. Furthermore, we find the SiO luminosity increases as a function of the Herschel 70 μm to WISE 22 μm flux ratio, suggesting the production of SiO is prevalent in younger, more embedded regions. Similarly, we find tentative evidence that sources with an SiO detection have a smaller bolometric luminosity-to-mass ratio, indicating SiO (8-7) emission is associated with potentially younger regions. We do not find a prevalence towards sources displaying signatures of infall in our sample. However, the higher energy HCO+ transitions may not be the best suited tracer of infall at this spatial resolution in these regions.

  11. Environmental Survey preliminary report, Hanford Site, Richland, Washington

    International Nuclear Information System (INIS)

    1987-08-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Hanford Site, conducted August 18 through September 5, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Hanford Site. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Hanford Site, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the Hanford Site. The Interim Report will reflect the final determinations of the Hanford Site Survey. 44 refs., 88 figs., 74 tabs

  12. Environmental Survey preliminary report, Hanford Site, Richland, Washington

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Hanford Site, conducted August 18 through September 5, 1986. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Hanford Site. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Hanford Site, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the Hanford Site. The Interim Report will reflect the final determinations of the Hanford Site Survey. 44 refs., 88 figs., 74 tabs.

  13. Environmental Survey preliminary report, Pantex Facility, Amarillo, Texas

    International Nuclear Information System (INIS)

    1987-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Pantex Facility, conducted November 3 through 14, 1986.The Survey is being conducted by an interdisciplinary team of environmental specialist, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Pantex Facility. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Pantex Facility, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory. When completed, the results will be incorporated into the Pantex Facility Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the Pantex Facility. 65 refs., 44 figs., 27 tabs

  14. Environmental Survey preliminary report, Pantex Facility, Amarillo, Texas

    Energy Technology Data Exchange (ETDEWEB)

    1987-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Pantex Facility, conducted November 3 through 14, 1986.The Survey is being conducted by an interdisciplinary team of environmental specialist, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Pantex Facility. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Pantex Facility, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory. When completed, the results will be incorporated into the Pantex Facility Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the Pantex Facility. 65 refs., 44 figs., 27 tabs.

  15. Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado

    International Nuclear Information System (INIS)

    1987-06-01

    This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs

  16. Environmental Survey preliminary report, Rocky Flats Plant, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    1987-06-01

    This report presents the preliminary findings of the Environmental Survey of the United States Department of Energy (DOE), Rocky Flats Plant (RFP), conducted August 11 through 22, 1986. The Survey is being conducted by an multidisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the RFP. The Survey covers all environmental media and all areas of environmental regulations. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data observations of the operations carried on at RFP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activates. The Sampling and Analysis Plan is being executed by DOE's Oak Ridge National Laboratory. When completed, the results will be incorporated into the RFP Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the RFP Survey. 75 refs., 24 figs., 33 tabs.

  17. Effort versus Reward: Preparing Samples for Fungal Community Characterization in High-Throughput Sequencing Surveys of Soils.

    Directory of Open Access Journals (Sweden)

    Zewei Song

    Full Text Available Next generation fungal amplicon sequencing is being used with increasing frequency to study fungal diversity in various ecosystems; however, the influence of sample preparation on the characterization of fungal community is poorly understood. We investigated the effects of four procedural modifications to library preparation for high-throughput sequencing (HTS. The following treatments were considered: 1 the amount of soil used in DNA extraction, 2 the inclusion of additional steps (freeze/thaw cycles, sonication, or hot water bath incubation in the extraction procedure, 3 the amount of DNA template used in PCR, and 4 the effect of sample pooling, either physically or computationally. Soils from two different ecosystems in Minnesota, USA, one prairie and one forest site, were used to assess the generality of our results. The first three treatments did not significantly influence observed fungal OTU richness or community structure at either site. Physical pooling captured more OTU richness compared to individual samples, but total OTU richness at each site was highest when individual samples were computationally combined. We conclude that standard extraction kit protocols are well optimized for fungal HTS surveys, but because sample pooling can significantly influence OTU richness estimates, it is important to carefully consider the study aims when planning sampling procedures.

  18. SSGSS: THE SPITZER–SDSS–GALEX SPECTROSCOPIC SURVEY

    International Nuclear Information System (INIS)

    O'Dowd, Matthew J.; Schiminovich, David; Johnson, Benjamin D.; Treyer, Marie A.; Martin, Christopher D.; Wyder, Ted K.; Charlot, Stéphane; Heckman, Timothy M.; Martins, Lucimara P.; Seibert, Mark; Van der Hulst, J. M.

    2011-01-01

    The Spitzer-SDSS-GALEX Spectroscopic Survey (SSGSS) provides a new sample of 101 star-forming galaxies at z < 0.2 with unprecedented multi-wavelength coverage. New mid- to far-infrared spectroscopy from the Spitzer Space Telescope is added to a rich suite of previous imaging and spectroscopy, including ROSAT, Galaxy Evolution Explorer, Sloan Digital Sky Survey, Two Micron All Sky Survey, and Spitzer/SWIRE. Sample selection ensures an even coverage of the full range of normal galaxy properties, spanning two orders of magnitude in stellar mass, color, and dust attenuation. In this paper we present the SSGSS data set, describe the science drivers, and detail the sample selection, observations, data reduction, and quality assessment. Also in this paper, we compare the shape of the thermal continuum and the degree of silicate absorption of these typical, star-forming galaxies to those of starburst galaxies. We investigate the link between star formation rate, infrared luminosity, and total polycyclic aromatic hydrocarbon luminosity, with a view to calibrating the latter for spectral energy distribution models in photometric samples and at high redshift. Last, we take advantage of the 5-40 μm spectroscopic and far-infrared photometric coverage of this sample to perform detailed fitting of the Draine et al. dust models, and investigate the link between dust mass and star formation history and active galactic nucleus properties.

  19. A survey of college-bound high school graduates regarding circadian preference, caffeine use, and academic performance.

    Science.gov (United States)

    Cole, James S

    2015-03-01

    This study examines the relationships between circadian preference and caffeine use with academic performance and hours spent studying for recent high school graduates entering their first year of college. Entering first-year college students enrolled at 90 baccalaureate-level institutions across the USA were invited to complete the Beginning College Survey of Student Engagement (BCSSE) and the Composite Scale of Morningness (CSM) as well as answer questions regarding caffeine consumption. Surveys were administered on each campus during the summer months of 2013. Only those that graduated from a US high school in the spring of 2013 were included in this study. The final sample for this study included 25,200 students that completed the BCSSE, CSM, and questions regarding caffeine consumption. Evening types (E-types) were significantly less likely to report earning A/A-'s in high school and less likely to study 16 or more hours per week compared to intermediate or morning types (M-types) (p students reported an average of 1.1 servings of caffeine per day, with 39 % reporting no caffeine consumption. M-types were more likely to consume no caffeine (54 %) compared to E-types that also indicated no daily caffeine (31 %) (p amount (7 %) (p high school. However, the apparent advantage that morning types had over evening types regarding high school grades was completely ameliorated once three or more servings of caffeine were consumed per day. This study provides additional information to educators and health professionals to create programs and provide resource to help adolescents better understand the impact of their sleep behaviors and use of caffeine on their academic performance.

  20. Point process models for spatio-temporal distance sampling data from a large-scale survey of blue whales

    KAUST Repository

    Yuan, Yuan; Bachl, Fabian E.; Lindgren, Finn; Borchers, David L.; Illian, Janine B.; Buckland, Stephen T.; Rue, Haavard; Gerrodette, Tim

    2017-01-01

    Distance sampling is a widely used method for estimating wildlife population abundance. The fact that conventional distance sampling methods are partly design-based constrains the spatial resolution at which animal density can be estimated using these methods. Estimates are usually obtained at survey stratum level. For an endangered species such as the blue whale, it is desirable to estimate density and abundance at a finer spatial scale than stratum. Temporal variation in the spatial structure is also important. We formulate the process generating distance sampling data as a thinned spatial point process and propose model-based inference using a spatial log-Gaussian Cox process. The method adopts a flexible stochastic partial differential equation (SPDE) approach to model spatial structure in density that is not accounted for by explanatory variables, and integrated nested Laplace approximation (INLA) for Bayesian inference. It allows simultaneous fitting of detection and density models and permits prediction of density at an arbitrarily fine scale. We estimate blue whale density in the Eastern Tropical Pacific Ocean from thirteen shipboard surveys conducted over 22 years. We find that higher blue whale density is associated with colder sea surface temperatures in space, and although there is some positive association between density and mean annual temperature, our estimates are consistent with no trend in density across years. Our analysis also indicates that there is substantial spatially structured variation in density that is not explained by available covariates.

  1. Point process models for spatio-temporal distance sampling data from a large-scale survey of blue whales

    KAUST Repository

    Yuan, Yuan

    2017-12-28

    Distance sampling is a widely used method for estimating wildlife population abundance. The fact that conventional distance sampling methods are partly design-based constrains the spatial resolution at which animal density can be estimated using these methods. Estimates are usually obtained at survey stratum level. For an endangered species such as the blue whale, it is desirable to estimate density and abundance at a finer spatial scale than stratum. Temporal variation in the spatial structure is also important. We formulate the process generating distance sampling data as a thinned spatial point process and propose model-based inference using a spatial log-Gaussian Cox process. The method adopts a flexible stochastic partial differential equation (SPDE) approach to model spatial structure in density that is not accounted for by explanatory variables, and integrated nested Laplace approximation (INLA) for Bayesian inference. It allows simultaneous fitting of detection and density models and permits prediction of density at an arbitrarily fine scale. We estimate blue whale density in the Eastern Tropical Pacific Ocean from thirteen shipboard surveys conducted over 22 years. We find that higher blue whale density is associated with colder sea surface temperatures in space, and although there is some positive association between density and mean annual temperature, our estimates are consistent with no trend in density across years. Our analysis also indicates that there is substantial spatially structured variation in density that is not explained by available covariates.

  2. Ochratoxin A in raisins and currants: basic extraction procedure used in two small marketing surveys of the occurrence and control of the heterogeneity of the toxins in samples.

    Science.gov (United States)

    Möller, T E; Nyberg, M

    2003-11-01

    A basic extraction procedure for analysis of ochratoxin A (OTA) in currants and raisins is described, as well as the occurrence of OTA and a control of heterogeneity of the toxin in samples bought for two small marketing surveys 1999/2000 and 2001/02. Most samples in the surveys were divided into two subsamples that were individually prepared as slurries and analysed separately. The limit of quantification for the method was estimated as 0.1 microg kg(-1) and recoveries of 85, 90 and 115% were achieved in recovery experiments at 10, 5 and 0.1 microg kg(-1), respectively. Of all 118 subsamples analysed in the surveys, 96 (84%) contained ochratoxin A at levels above the quantification level and five samples (4%) contained more than the European Community legislation of 10 microg kg(-1). The OTA concentrations found in the first survey were in the range Big differences were often achieved between individual subsamples of the original sample, which indicate a wide heterogeneous distribution of the toxin. Data from the repeatability test as well as recovery experiments from the same slurries showed that preparation of slurries as described here seemed to give a homogeneous and representative sample. The extraction with the basic sodium bicarbonate-methanol mixture used in the surveys gave similar or somewhat higher OTA values on some samples tested in a comparison with a weak phosphoric acid water-methanol extraction mixture.

  3. Evaluation of carbon monoxide in blood samples from the second health and nutrition survey. Progress report No. 1

    Energy Technology Data Exchange (ETDEWEB)

    Radford, E.P.

    1976-01-01

    This is a study of carbon monoxide (CO) in the blood of human subjects participating in the Second National Health and Nutrition Survey (HANES II), a detailed study of health indicators in sample populations of many communities throughout the U.S. The purpose of this aspect of the survey is to evaluate the levels of blood carboxyhemoglobin in normal individuals of all ages in typical U.S. communities, from whom accurate histories and clinical studies are available. This report gives results of the first of three years of analyses. A careful calibration of the analytical method has been completed, and more than 3000 blood samples have been analyzed. Although smoking histories are not yet available to permit evaluation of carboxyhemoglobin in non-smokers, in children under 12 years of age, blood COHb has been found to be consistently low, with less than 3% greater than 1.5% COHb. These preliminary results suggest that urban exposure to carbon monoxide among the general population is not now significant in the U.S., at least during the period of these early examinations.

  4. Report for fiscal 1999 on basic commercialization survey related to geological structure surveys in overseas countries (Kalewa area, Myanmar); 1999 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Myanmar Kalewa chiku) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Commercialization survey was performed on the coal beds in the Kalewa area in the Union of Myanmar by means of geological structure surveys. The site surveys included on-the-ground survey, test drilling survey, sample collection and analysis, and infrastructure survey. The on-the-ground survey area spread out about 5.5 km{sup 2}, wherein nine test wells were drilled (for total distance of 2,046.74 m), and coal and rock sample collection and analysis were carried out on six samples. The infrastructure survey was performed on coal transporting roads, and barge loading planned points and facilities. As a result of the test drilling survey, existence of coal beds with thickness of 4 ft, 9 ft and 6ft was identified. Since the 9-ft bed in particular exists stably with inclination of 40 to 42 degrees over the whole subject area, it was made clear that the bed can be the object of mining as the main coal bed. The coal is the ordinary coal with such good qualities as ash content of 4.72%, total sulfur content of 0.22%, and total calorific power of 6,500 to 6,570 kcal/kg. The defined coal quantity for the 9-ft bed is four million tons, or 7.7 million tons in total if the estimated coal quantity is added. The quantity will amount to 15.3 million tons when those of the 4-ft and 6-ft beds are added. (NEDO)

  5. Results of the radiological survey at the Town of Tonawanda Landfill, Tonawanda, New York (TNY001)

    International Nuclear Information System (INIS)

    Rodriguez, R.E.; Murray, M.E.; Uziel, M.S.

    1992-10-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the Town of Tonawanda Landfill, Tonawanda, New York. The survey was performed in September 1991. The purpose of the survey was to determine if radioactive materials from work performed under government contract at the Linde Air Products Division of Union Carbide Corporation, Tonawanda, New York, had been deposited in the landfill. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey suggest that material originating at the Linde plant may have been deposited in the landfill. Soil samples S54 and B12 contained technologically enhanced levels of 238 U not unlike the product formerly produced by the Linde plant. In contrast, samples B4A, B5A and B7B, containing elevated concentrations of 226 Ra and 230 Th with much lower concentrations of 238 U, were similar to the residue or byproduct of the refinery operation conducted at the Linde plant. In 24 instances, soil samples from the Town of Tonawanda Landfill exceeded DOE guideline values for 238 U, 226 Ra, and/or 230 Th in surface or subsurface soil. Nine of these samples contained radionuclide concentrations more than 30 times the guideline value

  6. Understanding Sample Surveys: Selective Learning about Social Science Research Methods

    Science.gov (United States)

    Currin-Percival, Mary; Johnson, Martin

    2010-01-01

    We investigate differences in what students learn about survey methodology in a class on public opinion presented in two critically different ways: with the inclusion or exclusion of an original research project using a random-digit-dial telephone survey. Using a quasi-experimental design and data obtained from pretests and posttests in two public…

  7. Regional soil erosion assessment based on a sample survey and geostatistics

    Science.gov (United States)

    Yin, Shuiqing; Zhu, Zhengyuan; Wang, Li; Liu, Baoyuan; Xie, Yun; Wang, Guannan; Li, Yishan

    2018-03-01

    Soil erosion is one of the most significant environmental problems in China. From 2010 to 2012, the fourth national census for soil erosion sampled 32 364 PSUs (Primary Sampling Units, small watersheds) with the areas of 0.2-3 km2. Land use and soil erosion controlling factors including rainfall erosivity, soil erodibility, slope length, slope steepness, biological practice, engineering practice, and tillage practice for the PSUs were surveyed, and the soil loss rate for each land use in the PSUs was estimated using an empirical model, the Chinese Soil Loss Equation (CSLE). Though the information collected from the sample units can be aggregated to estimate soil erosion conditions on a large scale; the problem of estimating soil erosion condition on a regional scale has not been addressed well. The aim of this study is to introduce a new model-based regional soil erosion assessment method combining a sample survey and geostatistics. We compared seven spatial interpolation models based on the bivariate penalized spline over triangulation (BPST) method to generate a regional soil erosion assessment from the PSUs. Shaanxi Province (3116 PSUs) in China was selected for the comparison and assessment as it is one of the areas with the most serious erosion problem. Ten-fold cross-validation based on the PSU data showed the model assisted by the land use, rainfall erosivity factor (R), soil erodibility factor (K), slope steepness factor (S), and slope length factor (L) derived from a 1 : 10 000 topography map is the best one, with the model efficiency coefficient (ME) being 0.75 and the MSE being 55.8 % of that for the model assisted by the land use alone. Among four erosion factors as the covariates, the S factor contributed the most information, followed by K and L factors, and R factor made almost no contribution to the spatial estimation of soil loss. The LS factor derived from 30 or 90 m Shuttle Radar Topography Mission (SRTM) digital elevation model (DEM) data

  8. Can we do better than the grid survey: Optimal synoptic surveys in presence of variable uncertainty and decorrelation scales

    Science.gov (United States)

    Frolov, Sergey; Garau, Bartolame; Bellingham, James

    2014-08-01

    Regular grid ("lawnmower") survey is a classical strategy for synoptic sampling of the ocean. Is it possible to achieve a more effective use of available resources if one takes into account a priori knowledge about variability in magnitudes of uncertainty and decorrelation scales? In this article, we develop and compare the performance of several path-planning algorithms: optimized "lawnmower," a graph-search algorithm (A*), and a fully nonlinear genetic algorithm. We use the machinery of the best linear unbiased estimator (BLUE) to quantify the ability of a vehicle fleet to synoptically map distribution of phytoplankton off the central California coast. We used satellite and in situ data to specify covariance information required by the BLUE estimator. Computational experiments showed that two types of sampling strategies are possible: a suboptimal space-filling design (produced by the "lawnmower" and the A* algorithms) and an optimal uncertainty-aware design (produced by the genetic algorithm). Unlike the space-filling designs that attempted to cover the entire survey area, the optimal design focused on revisiting areas of high uncertainty. Results of the multivehicle experiments showed that fleet performance predictors, such as cumulative speed or the weight of the fleet, predicted the performance of a homogeneous fleet well; however, these were poor predictors for comparing the performance of different platforms.

  9. Chance constrained problems: penalty reformulation and performance of sample approximation technique

    Czech Academy of Sciences Publication Activity Database

    Branda, Martin

    2012-01-01

    Roč. 48, č. 1 (2012), s. 105-122 ISSN 0023-5954 R&D Projects: GA ČR(CZ) GBP402/12/G097 Institutional research plan: CEZ:AV0Z10750506 Keywords : chance constrained problems * penalty functions * asymptotic equivalence * sample approximation technique * investment problem Subject RIV: BB - Applied Statistics, Operational Research Impact factor: 0.619, year: 2012 http://library.utia.cas.cz/separaty/2012/E/branda-chance constrained problems penalty reformulation and performance of sample approximation technique.pdf

  10. Impact of Cesium decontamination on performances of high activity sample analysis

    Energy Technology Data Exchange (ETDEWEB)

    Maillard, Christophe; Boyer-Deslys, Valerie; Dautheribes, Jean L.; Esbelin, Eric; Beres, Andre; Jan, Steve; Baghdadi, Sarah; Rivier, Cedric [CEA, Nuclear Energy Division, Bagnols sur Ceze (France). RadioChemistry and Processes Dept.

    2017-09-01

    Experiments in the ATALANTE facility can lead to high activity samples (for example the dissolution of hulls and spent fuels), essentially coming from the presence of {sup 137}Cs. Usually, these samples are handled in a shielded cell. The removal of this radionuclide from the sample would make it possible to handle it in glove boxes without having to perform an important dilution in the shielded cells beforehand. It would allow to analyze samples using techniques usually implemented in glove boxes (such as ICP, α spectrometry..) and to reach lower detection and quantification limits. To do so, a separation by extraction chromatography using a Triskem AMP-PAN column was developed. A cesium decontamination factor higher than 5 x 10{sup 4} and detection limits improvement up to a factor 100 were obtained.

  11. Geochemical drainage surveys for uranium: sampling and analytical methods based on trial surveys in Pennsylvania

    International Nuclear Information System (INIS)

    Rose, A.W.; Keith, M.L.; Suhr, N.H.

    1976-01-01

    Geochemical surveys near sandstone-type uranium prospects in northeastern and north-central Pennsylvania show that the deposits can be detected by carefully planned stream sediment surveys, but not by stream water surveys. Stream waters at single sites changed in U content by x10 to 50 during the 18 months of our studies, and even near known prospects, contain less than 0.2 ppB U most of the time. Uranium extractable from stream sediment by acetic acid--H 2 O 2 provides useful contrast between mineralized and nonmineralized drainages of a square mile or less; total U in sediment does not. High organic material results in increased U content of sediments and must be corrected. Changes in U content of sediment with time reach a maximum of x3 and appear to be of short duration. A sediment of about 200 mi 2 near Jim Thorpe detects anomalies extending over several square miles near known occurrences and a second anomaly about two miles northeast of Penn Haven Jct. A similar survey in Lycoming-Sullivan Counties shows anomalous zones near known prospects of the Beaver Lake area and northwest of Muncy Creek. As, Mn, Pb, and V are enriched in the mineralized zones, and perhaps in surrounding halo zones, but do not appear to be pathfinder elements useful for reconnaissance exploration

  12. Using Social Media and Targeted Snowball Sampling to Survey a Hard-to-reach Population: A Case Study

    Directory of Open Access Journals (Sweden)

    Gary Dusek

    2015-08-01

    Full Text Available Response rates to the academic surveys used in quantitative research are decreasing and have been for several decades among both individuals and organizations. Given this trend, providing doctoral students an opportunity to complete their dissertations in a timely and cost effective manner may necessitate identifying more innovative and relevant ways to collect data while maintaining appropriate research standards and rigor. The case of a research study is presented which describes the data collection process used to survey a hard-to-reach population. It details the use of social media, in this case LinkedIn, to facilitate the distribution of the web-based survey. A roadmap to illustrate how this data collection process unfolded is presented, as well as several “lessons learned” during this journey. An explanation of the considerations that impacted the sampling design is provided. The goal of this case study is to provide researchers, including doctoral students, with realistic expectations and an awareness of the benefits and risks associated with the use of this method of data collection.

  13. Annual Omnibus Survey: A survey of life in Qatar 2014

    OpenAIRE

    Diop, Abdoulaye; Gengler, Justin John; Khan, Mohammad N.; Traugott, Michael; Elawad, Elmogiera Fadlallh; Al Ansari, Majed; Le, Kien T.; El-Maghraby, Engi; Elkassem, Rima Charbaji; Qutteina, Yara; Al Khulaifi, Buthaina; Nasrallah, Catherine; Al Subaey, Mohammed; Mustafa, Semsia Al-Ali; Alqassass, Haneen

    2015-01-01

    This Executive Summary presents the highlights of the 2014 Omnibus survey, the fourth in a series of Omnibus surveys since 2010. The surveys were carried out by the Social and Economic Survey Research Institute (SESRI) of Qatar University. Each Omnibus survey interviews a large and representative sample of Qatari citizens, resident expatriates and laborers. In these surveys, we asked a number of questions covering several topics of importance to Qatari society, including their ...

  14. Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan

    OpenAIRE

    Pong, Suet-ling; Johnston, Jamie; Chen, Vivien

    2010-01-01

    Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting–school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American st...

  15. Spatial delayed nonmatching-to-sample performances in long-living Ames dwarf mice.

    Science.gov (United States)

    Derenne, Adam; Brown-Borg, Holly M; Martner, Sarah; Wolff, Wendy; Frerking, Morgan

    2014-01-17

    Ames dwarf mice have an extended lifespan by comparison with normal mice. Behavioral testing has revealed that sometimes Ames dwarf mice also evince superior performances relative to normal mice, but in other cases they do not. In this experiment, Ames dwarf and normal mice were compared on a T-maze test and on a delayed nonmatching-to-sample variant of a T-maze test. On the simple T-maze, Ames dwarf and normal mice committed comparable numbers of errors. On the nonmatching-to-sample task, normal mice mastered the discrimination by the end of the experiment while Ames dwarf mice did not. The apparatus, distances traveled and session duration were equivalent between the two tasks. The poorer performances of Ames dwarf mice on the nonmatching-to-sample task suggests that Ames dwarf mice may not be as capable of learning relatively cognitively complex tasks as normal mice. © 2013.

  16. Hepatitis C bio-behavioural surveys in people who inject drugs-a systematic review of sensitivity to the theoretical assumptions of respondent driven sampling.

    Science.gov (United States)

    Buchanan, Ryan; Khakoo, Salim I; Coad, Jonathan; Grellier, Leonie; Parkes, Julie

    2017-07-11

    New, more effective and better-tolerated therapies for hepatitis C (HCV) have made the elimination of HCV a feasible objective. However, for this to be achieved, it is necessary to have a detailed understanding of HCV epidemiology in people who inject drugs (PWID). Respondent-driven sampling (RDS) can provide prevalence estimates in hidden populations such as PWID. The aims of this systematic review are to identify published studies that use RDS in PWID to measure the prevalence of HCV, and compare each study against the STROBE-RDS checklist to assess their sensitivity to the theoretical assumptions underlying RDS. Searches were undertaken in accordance with PRISMA systematic review guidelines. Included studies were English language publications in peer-reviewed journals, which reported the use of RDS to recruit PWID to an HCV bio-behavioural survey. Data was extracted under three headings: (1) survey overview, (2) survey outcomes, and (3) reporting against selected STROBE-RDS criteria. Thirty-one studies met the inclusion criteria. They varied in scale (range 1-15 survey sites) and the sample sizes achieved (range 81-1000 per survey site) but were consistent in describing the use of standard RDS methods including: seeds, coupons and recruitment incentives. Twenty-seven studies (87%) either calculated or reported the intention to calculate population prevalence estimates for HCV and two used RDS data to calculate the total population size of PWID. Detailed operational and analytical procedures and reporting against selected criteria from the STROBE-RDS checklist varied between studies. There were widespread indications that sampling did not meet the assumptions underlying RDS, which led to two studies being unable to report an estimated HCV population prevalence in at least one survey location. RDS can be used to estimate a population prevalence of HCV in PWID and estimate the PWID population size. Accordingly, as a single instrument, it is a useful tool for

  17. The Danish Health Examination Survey 2007-2008 (DANHES 2007-2008)

    DEFF Research Database (Denmark)

    Eriksen, Louise; Grønbæk, Morten; Helge, Jørn Wulff

    2011-01-01

    AIMS: The Danish Health Examination Survey (DANHES 2007-2008) was carried out by the National Institute of Public Health, University of Southern Denmark, in 13 Danish municipalities in 2007-2008. The focus of the survey was diet, smoking, alcohol, and physical activity. The aim of the survey......, and living conditions, and a supplementary food frequency questionnaire. The health examination contained measurements of blood pressure, resting heart rate, height, weight, fat percentage, waist and hip circumference, blood and hair samples, spirometry, bone mineral density, physical performance, muscle...

  18. Recruiting migrants for health research through social network sites: an online survey among chinese migrants in australia.

    Science.gov (United States)

    Hu, Jie; Wong, Kam Cheong; Wang, Zhiqiang

    2015-04-27

    Traditionally, postal surveys or face to face interviews are the main approaches for health researchers to obtain essential research data. However, with the prevalence of information technology and Internet, Web-based surveys are gaining popularity in health research. This study aims to report the process and outcomes of recruiting Chinese migrants through social network sites in Australia and to examine the sample characteristics of online recruitment by comparing the sample which was recruited by an online survey to a sample of Australian Chinese migrants collected by a postal survey. Descriptive analyses were performed to describe and compare the process and outcomes of online recruitment with postal survey questionnaires. Chi square tests and t tests were performed to assess the differences between the two samples for categorical and continuous variables respectively. In total, 473 Chinese migrants completed the online health survey from July to October 2013. Out of 426 participants recruited through the three Chinese social network sites in Australia, over 86.6% (369/426) were recruited within six weeks. Participants of the Web-based survey were younger, with a higher education level or had resided in Australia for less time compared to those recruited via a postal survey. However, there was no significant difference in gender, marital status, and professional occupation. The recruitment of Chinese migrants through social network sites in our online survey was feasible. Compared to a postal survey of Chinese migrants, the online survey attracted different group of Chinese migrants who may have diverse health needs and concerns. Our findings provided insightful information for researchers who are considering employing a Web-based approach to recruit migrants and ethnic minority participants.

  19. The SAGES Legacy Unifying Globulars and Galaxies survey (SLUGGS): sample definition, methods, and initial results

    Energy Technology Data Exchange (ETDEWEB)

    Brodie, Jean P.; Romanowsky, Aaron J.; Jennings, Zachary G.; Pota, Vincenzo; Kader, Justin; Roediger, Joel C.; Villaume, Alexa; Arnold, Jacob A.; Woodley, Kristin A. [University of California Observatories, 1156 High Street, Santa Cruz, CA 95064 (United States); Strader, Jay [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Forbes, Duncan A.; Pastorello, Nicola; Usher, Christopher; Blom, Christina; Kartha, Sreeja S. [Centre for Astrophysics and Supercomputing, Swinburne University, Hawthorn, VIC 3122 (Australia); Foster, Caroline; Spitler, Lee R., E-mail: jbrodie@ucsc.edu [Australian Astronomical Observatory, P.O. Box 915, North Ryde, NSW 1670 (Australia)

    2014-11-20

    We introduce and provide the scientific motivation for a wide-field photometric and spectroscopic chemodynamical survey of nearby early-type galaxies (ETGs) and their globular cluster (GC) systems. The SAGES Legacy Unifying Globulars and GalaxieS (SLUGGS) survey is being carried out primarily with Subaru/Suprime-Cam and Keck/DEIMOS. The former provides deep gri imaging over a 900 arcmin{sup 2} field-of-view to characterize GC and host galaxy colors and spatial distributions, and to identify spectroscopic targets. The NIR Ca II triplet provides GC line-of-sight velocities and metallicities out to typically ∼8 R {sub e}, and to ∼15 R {sub e} in some cases. New techniques to extract integrated stellar kinematics and metallicities to large radii (∼2-3 R {sub e}) are used in concert with GC data to create two-dimensional (2D) velocity and metallicity maps for comparison with simulations of galaxy formation. The advantages of SLUGGS compared with other, complementary, 2D-chemodynamical surveys are its superior velocity resolution, radial extent, and multiple halo tracers. We describe the sample of 25 nearby ETGs, the selection criteria for galaxies and GCs, the observing strategies, the data reduction techniques, and modeling methods. The survey observations are nearly complete and more than 30 papers have so far been published using SLUGGS data. Here we summarize some initial results, including signatures of two-phase galaxy assembly, evidence for GC metallicity bimodality, and a novel framework for the formation of extended star clusters and ultracompact dwarfs. An integrated overview of current chemodynamical constraints on GC systems points to separate, in situ formation modes at high redshifts for metal-poor and metal-rich GCs.

  20. Environmental Survey preliminary report, Feed Materials Production Center, Fernald, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    This report presents the preliminary findings from the first phase of the environmental survey of the United States Department of Energy (DOE) Feed Materials Production Center (FMPC), conducted June 16 through 27, 1986. The survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the survey is to identify environmental problems and areas of environmental risk associated with the FMPC. The survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the survey involves the review of existing site environmental data, observations of the operations carried on at FMPC, and interviews with site personnel. The survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its onsite activities. The Sampling and Analysis Plan will be executed by a DOE national laboratory or a support contractor. When completed, the results will be incorporated into the FMPC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the FMPC survey. 41 refs., 20 figs., 25 tabs.

  1. Environmental Survey preliminary report, Brookhaven National Laboratory, Upton, New York

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Brookhaven National Laboratory (BNL) conducted April 6 through 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with BNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at BNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Oak Ridge National Laboratory. When completed, the results will be incorporated into the BNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the BNL Survey. 80 refs., 24 figs., 48 tabs.

  2. Environmental Survey preliminary report, Brookhaven National Laboratory, Upton, New York

    International Nuclear Information System (INIS)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Brookhaven National Laboratory (BNL) conducted April 6 through 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with BNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at BNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Oak Ridge National Laboratory. When completed, the results will be incorporated into the BNL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the BNL Survey. 80 refs., 24 figs., 48 tabs

  3. The outlier sample effects on multivariate statistical data processing geochemical stream sediment survey (Moghangegh region, North West of Iran)

    International Nuclear Information System (INIS)

    Ghanbari, Y.; Habibnia, A.; Memar, A.

    2009-01-01

    In geochemical stream sediment surveys in Moghangegh Region in north west of Iran, sheet 1:50,000, 152 samples were collected and after the analyze and processing of data, it revealed that Yb, Sc, Ni, Li, Eu, Cd, Co, as contents in one sample is far higher than other samples. After detecting this sample as an outlier sample, the effect of this sample on multivariate statistical data processing for destructive effects of outlier sample in geochemical exploration was investigated. Pearson and Spear man correlation coefficient methods and cluster analysis were used for multivariate studies and the scatter plot of some elements together the regression profiles are given in case of 152 and 151 samples and the results are compared. After investigation of multivariate statistical data processing results, it was realized that results of existence of outlier samples may appear as the following relations between elements: - true relation between two elements, which have no outlier frequency in the outlier sample. - false relation between two elements which one of them has outlier frequency in the outlier sample. - complete false relation between two elements which both have outlier frequency in the outlier sample

  4. Cluster-sample surveys and lot quality assurance sampling to evaluate yellow fever immunisation coverage following a national campaign, Bolivia, 2007.

    Science.gov (United States)

    Pezzoli, Lorenzo; Pineda, Silvia; Halkyer, Percy; Crespo, Gladys; Andrews, Nick; Ronveaux, Olivier

    2009-03-01

    To estimate the yellow fever (YF) vaccine coverage for the endemic and non-endemic areas of Bolivia and to determine whether selected districts had acceptable levels of coverage (>70%). We conducted two surveys of 600 individuals (25 x 12 clusters) to estimate coverage in the endemic and non-endemic areas. We assessed 11 districts using lot quality assurance sampling (LQAS). The lot (district) sample was 35 individuals with six as decision value (alpha error 6% if true coverage 70%; beta error 6% if true coverage 90%). To increase feasibility, we divided the lots into five clusters of seven individuals; to investigate the effect of clustering, we calculated alpha and beta by conducting simulations where each cluster's true coverage was sampled from a normal distribution with a mean of 70% or 90% and standard deviations of 5% or 10%. Estimated coverage was 84.3% (95% CI: 78.9-89.7) in endemic areas, 86.8% (82.5-91.0) in non-endemic and 86.0% (82.8-89.1) nationally. LQAS showed that four lots had unacceptable coverage levels. In six lots, results were inconsistent with the estimated administrative coverage. The simulations suggested that the effect of clustering the lots is unlikely to have significantly increased the risk of making incorrect accept/reject decisions. Estimated YF coverage was high. Discrepancies between administrative coverage and LQAS results may be due to incorrect population data. Even allowing for clustering in LQAS, the statistical errors would remain low. Catch-up campaigns are recommended in districts with unacceptable coverage.

  5. Results of the radiological survey of the Excelsior Steel Ball Company, Tonawanda, New York (TNY005)

    International Nuclear Information System (INIS)

    McKenzie, S.P.; Brown, K.S.

    1998-07-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted two radiological surveys of property belonging to the Excelsior Steel Ball Company, which is surrounded on three sides by the former site of the Linde Uranium Refinery, Tonawanda, New York. The surveys were performed in September 1997 and February 1998. The purpose of the first survey was to determine if radioactive residuals were present from previous activities at the former Linde site. The Linde Air Products Division of Union Carbide Corporation, Tonawanda, New York, had used radioactive materials at that location for work performed under government contract from 1942 through 1948. The purpose of the second survey was to collect additional biased samples from an area of the site where biased sample results showed slightly elevated levels of thorium-232

  6. Evaluation of Mechanisms to Improve Performance of Mobile Phone Surveys in Low- and Middle-Income Countries: Research Protocol.

    Science.gov (United States)

    Gibson, Dustin G; Pariyo, George William; Wosu, Adaeze C; Greenleaf, Abigail R; Ali, Joseph; Ahmed, Saifuddin; Labrique, Alain B; Islam, Khaleda; Masanja, Honorati; Rutebemberwa, Elizeus; Hyder, Adnan A

    2017-05-05

    Mobile phone ownership and access have increased rapidly across low- and middle-income countries (LMICs) within the last decade. Concomitantly, LMICs are experiencing demographic and epidemiologic transitions, where non-communicable diseases (NCDs) are increasingly becoming leading causes of morbidity and mortality. Mobile phone surveys could aid data collection for prevention and control of these NCDs but limited evidence of their feasibility exists. The objective of this paper is to describe a series of sub-studies aimed at optimizing the delivery of interactive voice response (IVR) and computer-assisted telephone interviews (CATI) for NCD risk factor data collection in LMICs. These sub-studies are designed to assess the effect of factors such as airtime incentive timing, amount, and structure, survey introduction characteristics, different sampling frames, and survey modality on key survey metrics, such as survey response, completion, and attrition rates. In a series of sub-studies, participants will be randomly assigned to receive different airtime incentive amounts (eg, 10 minutes of airtime versus 20 minutes of airtime), different incentive delivery timings (airtime delivered before survey begins versus delivery upon completion of survey), different survey introductions (informational versus motivational), different narrative voices (male versus female), and different sampling frames (random digit dialing versus mobile network operator-provided numbers) to examine which study arms will yield the highest response and completion rates. Furthermore, response and completion rates and the inter-modal reliability of the IVR and CATI delivery methods will be compared. Research activities are expected to be completed in Bangladesh, Tanzania, and Uganda in 2017. This is one of the first studies to examine the feasibility of using IVR and CATI for systematic collection of NCD risk factor information in LMICs. Our findings will inform the future design and

  7. Explaining health care expenditure variation: large-sample evidence using linked survey and health administrative data.

    Science.gov (United States)

    Ellis, Randall P; Fiebig, Denzil G; Johar, Meliyanni; Jones, Glenn; Savage, Elizabeth

    2013-09-01

    Explaining individual, regional, and provider variation in health care spending is of enormous value to policymakers but is often hampered by the lack of individual level detail in universal public health systems because budgeted spending is often not attributable to specific individuals. Even rarer is self-reported survey information that helps explain this variation in large samples. In this paper, we link a cross-sectional survey of 267 188 Australians age 45 and over to a panel dataset of annual healthcare costs calculated from several years of hospital, medical and pharmaceutical records. We use this data to distinguish between cost variations due to health shocks and those that are intrinsic (fixed) to an individual over three years. We find that high fixed expenditures are positively associated with age, especially older males, poor health, obesity, smoking, cancer, stroke and heart conditions. Being foreign born, speaking a foreign language at home and low income are more strongly associated with higher time-varying expenditures, suggesting greater exposure to adverse health shocks. Copyright © 2013 John Wiley & Sons, Ltd.

  8. Hospital network performance: a survey of hospital stakeholders' perspectives.

    Science.gov (United States)

    Bravi, F; Gibertoni, D; Marcon, A; Sicotte, C; Minvielle, E; Rucci, P; Angelastro, A; Carradori, T; Fantini, M P

    2013-02-01

    Hospital networks are an emerging organizational form designed to face the new challenges of public health systems. Although the benefits introduced by network models in terms of rationalization of resources are known, evidence about stakeholders' perspectives on hospital network performance from the literature is scanty. Using the Competing Values Framework of organizational effectiveness and its subsequent adaptation by Minvielle et al., we conducted in 2009 a survey in five hospitals of an Italian network for oncological care to examine and compare the views on hospital network performance of internal stakeholders (physicians, nurses and the administrative staff). 329 questionnaires exploring stakeholders' perspectives were completed, with a response rate of 65.8%. Using exploratory factor analysis of the 66 items of the questionnaire, we identified 4 factors, i.e. Centrality of relationships, Quality of care, Attractiveness/Reputation and Staff empowerment and Protection of workers' rights. 42 items were retained in the analysis. Factor scores proved to be high (mean score>8 on a 10-item scale), except for Attractiveness/Reputation (mean score 6.79), indicating that stakeholders attach a higher importance to relational and health care aspects. Comparison of factor scores among stakeholders did not reveal significant differences, suggesting a broadly shared view on hospital network performance. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  9. Geochemical reanalysis of historical U.S. Geological Survey sediment samples from the Zane Hills, Hughes and Shungnak quadrangles, Alaska

    Science.gov (United States)

    Werdon, Melanie B.; Granitto, Matthew; Azain, Jaime S.

    2015-01-01

    The State of Alaska’s Strategic and Critical Minerals (SCM) Assessment project, a State-funded Capital Improvement Project (CIP), is designed to evaluate Alaska’s statewide potential for SCM resources. The SCM Assessment is being implemented by the Alaska Division of Geological & Geophysical Surveys (DGGS), and involves obtaining new airborne-geophysical, geological, and geochemical data. As part of the SCM Assessment, thousands of historical geochemical samples from DGGS, U.S. Geological Survey (USGS), and U.S. Bureau of Mines archives are being reanalyzed by DGGS using modern, quantitative, geochemical-analytical methods. The objective is to update the statewide geochemical database to more clearly identify areas in Alaska with SCM potential.The USGS is also undertaking SCM-related geologic studies in Alaska through the federally funded Alaska Critical Minerals cooperative project. DGGS and USGS share the goal of evaluating Alaska’s strategic and critical minerals potential and together created a Letter of Agreement (signed December 2012) and a supplementary Technical Assistance Agreement (#14CMTAA143458) to facilitate the two agencies’ cooperative work. Under these agreements, DGGS contracted the USGS in Denver to reanalyze historical USGS sediment samples from Alaska.For this report, DGGS funded reanalysis of 105 historical USGS sediment samples from the statewide Alaska Geochemical Database Version 2.0 (AGDB2; Granitto and others, 2013). Samples were chosen from the Zane Hills area in the Hughes and Shungnak quadrangles, Alaska (fig. 1). The USGS was responsible for sample retrieval from the National Geochemical Sample Archive (NGSA) in Denver, Colorado through the final quality assurance/quality control (QA/QC) of the geochemical analyses obtained through the USGS contract lab. The new geochemical data are published in this report as a coauthored DGGS report, and will be incorporated into the statewide geochemical databases of both agencies.

  10. The environmental survey manual

    International Nuclear Information System (INIS)

    1987-08-01

    The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

  11. Does ICT influence supply chain management and performance? A review of survey-based research

    NARCIS (Netherlands)

    Zhang, Xuan; van Donk, Dirk Pieter; van der Vaart, Taco

    2011-01-01

    Purpose - The purpose of this paper is to review and classify survey-based research connecting information and communication technology (ICT), supply chain management (SCM), and supply chain (SC) performance. The review evaluates present empirical results and aims at detecting explanations for

  12. The Horonobe Underground Research Laboratory (Tentative name) Project. A program on survey and research performed from earth surface

    International Nuclear Information System (INIS)

    2001-03-01

    The Horonobe Underground Research Laboratory (Tentative name) Project under planning at Horonobe-machi by the Japan Nuclear Cycle Development Institute (JNC) is a research facility on deep underground shown in the Long-term program on research, development and application of nuclear energy (June, 1994)' (LPNE), where some researches on the deep underground targeted at sedimentary rocks are carried out. The plan on The Horonobe Underground Research Laboratory performed at Horonobe-machi' is an about 20 years plan ranging from beginning to finishing of its survey and research, which is carried out by three steps such as 'Survey and research performed from earth surface', 'Survey and research performed under excavation of road', and Survey and research performed by using the road'. The Horonobe Underground Research Laboratory is one of research facilities on deep underground shown its importance in LPNE, and carries out some researches on the deep underground at a target of the sedimentary rocks. And also The Horonobe Underground Research Laboratory confirms some technical reliability and support on stratum disposal shown in the 'Technical reliability on stratum disposal of the high level radioactive wastes. The Second Progress Report of R and D on geological disposal' summarized on November, 1999 by JNC through actual tests and researches at the deep stratum. The obtained results are intended to reflect to disposal business of The Horonobe Underground Research Laboratory and safety regulation and so on performed by the government, together with results of stratum science research, at the Tono Geoscience Center, of geological disposal R and D at the Tokai Works, or of international collaborations. For R and D at the The Horonobe Underground Research Laboratory after 2000, following subjects are shown: 1) Survey technique on long-term stability of geological environment, 2) Survey technique on geological environment, 3) Engineering technique on engineered barrier and

  13. Report for fiscal 1998 on basic commercialization survey related to geological structure surveys in overseas countries (Manguerra, the Philippines); 1998 nendo kaigai chishitsu kozo nado chosa ni kakawaru kigyoka kiso chosa (Philippines Manguerra) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Commercialization survey was performed on the mines in the Manguerra district in the Philippines by means of geological structure surveys. The site surveys included geological and test drilling surveys, and those on conditions for developing underground mining mines, and infrastructures. The geological survey area spread out about 5 km{sup 2}, two test wells were drilled (to depths of 330 m and 290 m), trench survey was performed on 58 locations, and coal sample collection and analysis were carried out on eight locations. Furthermore, surveys were extended to the Manguerra mine operating status, on-the-ground facilities, roads for transportation, marketing, and related laws and regulations. As a result of the surveys, the Manguerra district was suggested of frequent sea water inundation into the coal field, leading to a view that the district is unstable from the viewpoint of development of coal beds. However, samples collected from the existing mining area indicated to have less water content and ash and high calorific power. The coal has high product value. The result of coal quantity calculation indicated 320122 tons as the total of defined and estimated quantity. The great depth mining plan was prepared from the viewpoints of actual yield, productivity, safety aspects, technological enhancement, and suppression of additional investments to minimum. (NEDO)

  14. Communication Problems in Turner Syndrome: A Sample Survey.

    Science.gov (United States)

    Van Borsel, John; Dhooge, Inge; Verhoye, Kristof; Derde, Kristel; Curfs, Leopold

    1999-01-01

    A survey of 128 females (ages 2-58) with Turner syndrome found almost one quarter were receiving or had received treatment for stuttering, articulation problems, and/or delayed language development, with the latter two disorders being checked most frequently. Only 4 or the 68 individuals receiving growth hormone treatment reported voice changes.…

  15. 2010 Survey on cell phone use while performing cardiopulmonary bypass.

    Science.gov (United States)

    Smith, T; Darling, E; Searles, B

    2011-09-01

    Cell phone use in the U.S. has increased dramatically over the past decade and text messaging among adults is now mainstream. In professions such as perfusion, where clinical vigilance is essential to patient care, the potential distraction of cell phones may be especially problematic. However, the extent of this as an issue is currently unknown. Therefore, the purpose of this study was to (1) determine the frequency of cell phone use in the perfusion community, and (2) to identify concerns and opinions among perfusionists regarding cell phone use. In October 2010, a link to a 19-question survey (surveymonkey.com) was posted on the AmSECT (PerfList) and Perfusion.com (PerfMail) forums. There were 439 respondents. Demographic distribution is as follows; Chief Perfusionist (30.5%), Staff Perfusionist (62.0%), and Other (7.5%), with age ranges of 20-30 years (14.2%), 30-40 years (26.5%), 40-50 years (26.7%), 50-60 years (26.7%), >60 years (5.9%). The use of a cell phone during the performance of cardiopulmonary bypass (CPB) was reported by 55.6% of perfusionists. Sending text messages while performing CPB was acknowledged by 49.2%, with clear generational differences detected when cross-referenced with age groups. For smart phone features, perfusionists report having accessed e-mail (21%), used the internet (15.1%), or have checked/posted on social networking sites (3.1%) while performing CPB. Safety concerns were expressed by 78.3% who believe that cell phones can introduce a potentially significant safety risk to patients. Speaking on a cell phone and text messaging during CPB are regarded as "always an unsafe practice" by 42.3% and 51.7% of respondents, respectively. Personal distraction by cell phone use that negatively affected performance was admitted by 7.3%, whereas witnessing another perfusionist distracted with phone/text while on CPB was acknowledged by 33.7% of respondents. This survey suggests that the majority of perfusionists believe cell phones raise

  16. Comprehensive engineering and radiological survey of the Bochvar VNIINM site

    International Nuclear Information System (INIS)

    Bazhanov, M.S.; Belousov, S.V.; Grishin, E.Zh.; Kotov, A.L.; Kuznetsov, A.Yu.; Savin, S.K.; Sukhanov, L.P.; Chernikov, M.A.; Utrobin, D.V.

    2012-01-01

    The comprehensive engineering and radiological survey (CERS) of Bochvar VNIINM war performed in 2010-2012. During the performance of the survey, radiometric measurements were taken to determine the total activity of α-emitting radionuclides in the air of work rooms, gas releases and in the environment, α- and β-emitting radionuclides in the air of work rooms, air releases from the site, waste waters, samples of snow, soil and vegetation, and in process oils. As a result of the work, experience was obtained in performing CERS of buildings and territory, standardized CERS programmes were developed, essential information was collected about radioactive contamination of both buildings and territory of the Bochvar VNIINM [ru

  17. Complex surveys analysis of categorical data

    CERN Document Server

    Mukhopadhyay, Parimal

    2016-01-01

    The primary objective of this book is to study some of the research topics in the area of analysis of complex surveys which have not been covered in any book yet. It discusses the analysis of categorical data using three models: a full model, a log-linear model and a logistic regression model. It is a valuable resource for survey statisticians and practitioners in the field of sociology, biology, economics, psychology and other areas who have to use these procedures in their day-to-day work. It is also useful for courses on sampling and complex surveys at the upper-undergraduate and graduate levels. The importance of sample surveys today cannot be overstated. From voters’ behaviour to fields such as industry, agriculture, economics, sociology, psychology, investigators generally resort to survey sampling to obtain an assessment of the behaviour of the population they are interested in. Many large-scale sample surveys collect data using complex survey designs like multistage stratified cluster designs. The o...

  18. THE TIME DOMAIN SPECTROSCOPIC SURVEY: VARIABLE SELECTION AND ANTICIPATED RESULTS

    Energy Technology Data Exchange (ETDEWEB)

    Morganson, Eric; Green, Paul J. [Harvard Smithsonian Center for Astrophysics, 60 Garden St, Cambridge, MA 02138 (United States); Anderson, Scott F.; Ruan, John J. [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States); Myers, Adam D. [Department of Physics and Astronomy, University of Wyoming, Laramie, WY 82071 (United States); Eracleous, Michael; Brandt, William Nielsen [Department of Astronomy and Astrophysics, 525 Davey Laboratory, The Pennsylvania State University, University Park, PA 16802 (United States); Kelly, Brandon [Department of Physics, Broida Hall, University of California, Santa Barbara, CA 93106-9530 (United States); Badenes, Carlos [Department of Physics and Astronomy and Pittsburgh Particle Physics, Astrophysics and Cosmology Center (PITT PACC), University of Pittsburgh, 3941 O’Hara St, Pittsburgh, PA 15260 (United States); Bañados, Eduardo [Max-Planck-Institut für Astronomie, Königstuhl 17, D-69117 Heidelberg (Germany); Blanton, Michael R. [Center for Cosmology and Particle Physics, Department of Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Bershady, Matthew A. [Department of Astronomy, University of Wisconsin, 475 N. Charter St., Madison, WI 53706 (United States); Borissova, Jura [Instituto de Física y Astronomía, Universidad de Valparaíso, Av. Gran Bretaña 1111, Playa Ancha, Casilla 5030, and Millennium Institute of Astrophysics (MAS), Santiago (Chile); Burgett, William S. [GMTO Corp, Suite 300, 251 S. Lake Ave, Pasadena, CA 91101 (United States); Chambers, Kenneth, E-mail: emorganson@cfa.harvard.edu [Institute for Astronomy, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); and others

    2015-06-20

    We present the selection algorithm and anticipated results for the Time Domain Spectroscopic Survey (TDSS). TDSS is an Sloan Digital Sky Survey (SDSS)-IV Extended Baryon Oscillation Spectroscopic Survey (eBOSS) subproject that will provide initial identification spectra of approximately 220,000 luminosity-variable objects (variable stars and active galactic nuclei across 7500 deg{sup 2} selected from a combination of SDSS and multi-epoch Pan-STARRS1 photometry. TDSS will be the largest spectroscopic survey to explicitly target variable objects, avoiding pre-selection on the basis of colors or detailed modeling of specific variability characteristics. Kernel Density Estimate analysis of our target population performed on SDSS Stripe 82 data suggests our target sample will be 95% pure (meaning 95% of objects we select have genuine luminosity variability of a few magnitudes or more). Our final spectroscopic sample will contain roughly 135,000 quasars and 85,000 stellar variables, approximately 4000 of which will be RR Lyrae stars which may be used as outer Milky Way probes. The variability-selected quasar population has a smoother redshift distribution than a color-selected sample, and variability measurements similar to those we develop here may be used to make more uniform quasar samples in large surveys. The stellar variable targets are distributed fairly uniformly across color space, indicating that TDSS will obtain spectra for a wide variety of stellar variables including pulsating variables, stars with significant chromospheric activity, cataclysmic variables, and eclipsing binaries. TDSS will serve as a pathfinder mission to identify and characterize the multitude of variable objects that will be detected photometrically in even larger variability surveys such as Large Synoptic Survey Telescope.

  19. Sample substitution can be an acceptable data-collection strategy: the case of the Belgian Health Interview Survey.

    Science.gov (United States)

    Demarest, Stefaan; Molenberghs, Geert; Van der Heyden, Johan; Gisle, Lydia; Van Oyen, Herman; de Waleffe, Sandrine; Van Hal, Guido

    2017-11-01

    Substitution of non-participating households is used in the Belgian Health Interview Survey (BHIS) as a method to obtain the predefined net sample size. Yet, possible effects of applying substitution on response rates and health estimates remain uncertain. In this article, the process of substitution with its impact on response rates and health estimates is assessed. The response rates (RR)-both at household and individual level-according to the sampling criteria were calculated for each stage of the substitution process, together with the individual accrual rate (AR). Unweighted and weighted health estimates were calculated before and after applying substitution. Of the 10,468 members of 4878 initial households, 5904 members (RRind: 56.4%) of 2707 households (RRhh: 55.5%) participated. For the three successive (matched) substitutes, the RR dropped to 45%. The composition of the net sample resembles the one of the initial samples. Applying substitution did not produce any important distorting effects on the estimates. Applying substitution leads to an increase in non-participation, but does not impact the estimations.

  20. 105-F and DR Phase 1 Sampling and Analysis Plan

    International Nuclear Information System (INIS)

    Curry, L.R.

    1998-06-01

    This SAP presents the rationale and strategy for characterization of specific rooms within the 105-F and 105-DR reactor buildings. Figures 1-1 and 1-2 identify the rooms that are the subject of this SAP. These rooms are to be decontaminated and demolished as an initial step (Phase 1 ) in the Interim Safe Storage process for these reactors. Section 1.0 presents the background and sites history for the reactor buildings and summarizes the data quality objective process, which provides the logical basis for this SAP. Preliminary surveys indicate that little radiochemical contamination is present. Section 2.0 presents the quality assurance project plan, which includes a project management structure, sampling methods and quality control, and oversight of the sampling process. Section 2.2.1 summarizes the sampling methods, reflecting the radiological and chemical sampling designs presented in Tables 1-17 and 1-18. Section 3.0 presents the Field Sampling Plan for Phase 1. The sampling design is broken into two stages. Stage 1 will verify the list of radioactive constituents of concern and generate the isotopic distribution. The objectives of Stage 2 are to estimate the radionuclide inventories of room debris, quantify chemical contamination, and survey room contents for potential salvage or recycle. Table 3-1 presents the sampling activities to be performed in Stage 1. Tables 1-17 and 1-18 identify samples to be collected in Stage 2. Stage 2 will consist primarily of survey data collection, with fixed laboratory samples to be collected in areas showing visible stains. Quality control sampling requirements are presented in Table 3-2

  1. Analysis of low birth weight and its co-variants in Bangladesh based on a sub-sample from nationally representative survey.

    Science.gov (United States)

    Khan, Jahidur Rahman; Islam, Md Mazharul; Awan, Nabil; Muurlink, Olav

    2018-03-06

    Low birth weight (LBW) remains a leading global cause of childhood morbidity and mortality. This study leverages a large national survey to determine current prevalence and socioeconomic, demographic and heath related factors associated with LBW in Bangladesh. Data from the Multiple Indicator Cluster Survey (MICS) 2012-13 of Bangladesh were analyzed. A total of 2319 women for whom contemporaneous birth weight data was available and who had a live birth in the two years preceding the survey were sampled for this study. However, this analysis only was able to take advantage of 29% of the total sample with 71% missing birth weight for newborns. The indicator, LBW (rates observed in Rajshahi (11%) and highest rates in Rangpur (28%). Education of mothers (adjusted odds ratio [AOR] 0.52, 95% confidence interval [CI] 0.39-0.68 for secondary or higher educated mother) and poor antenatal care (ANC) (AOR 1.40, 95% CI 1.04-1.90) were associated with LBW after adjusting for mother's age, parity and cluster effects. Mothers from wealthier families were less likely to give birth to an LBW infant. Further indicators that wealth continues to play a role in LBW were that place of delivery, ANC and delivery assistance by quality health workers were significantly associated with LBW. However there has been a notable fall in LBW prevalence in Bangladesh since the last comparable survey (prevalence 36%), and an evidence of possible elimination of rural/urban disparities. Low birth weight remains associated with key indicators not just of maternal poverty (notably adequate maternal education) but also markers of structural poverty in health care (notably quality ANC). Results based on this sub-sample indicate LBW is still a public health concern in Bangladesh and an integrated effort from all stakeholders should be continued and interventions based on the study findings should be devised to further reduce the risk of LBW.

  2. Nested PCR detection of malaria directly using blood filter paper samples from epidemiological surveys.

    Science.gov (United States)

    Li, Peipei; Zhao, Zhenjun; Wang, Ying; Xing, Hua; Parker, Daniel M; Yang, Zhaoqing; Baum, Elizabeth; Li, Wenli; Sattabongkot, Jetsumon; Sirichaisinthop, Jeeraphat; Li, Shuying; Yan, Guiyun; Cui, Liwang; Fan, Qi

    2014-05-08

    Nested PCR is considered a sensitive and specific method for detecting malaria parasites and is especially useful in epidemiological surveys. However, the preparation of DNA templates for PCR is often time-consuming and costly. A simplified PCR method was developed to directly use a small blood filter paper square (2 × 2 mm) as the DNA template after treatment with saponin. This filter paper-based nested PCR method (FP-PCR) was compared to microscopy and standard nested PCR with DNA extracted by using a Qiagen DNA mini kit from filter paper blood spots of 204 febrile cases. The FP-PCR technique was further applied to evaluate malaria infections in 1,708 participants from cross-sectional epidemiological surveys conducted in Myanmar and Thailand. The FP-PCR method had a detection limit of ~0.2 parasites/μL blood, estimated using cultured Plasmodium falciparum parasites. With 204 field samples, the sensitivity of the FP-PCR method was comparable to that of the standard nested PCR method, which was significantly higher than that of microscopy. Application of the FP-PCR method in large cross-sectional studies conducted in Myanmar and Thailand detected 1.9% (12/638) and 6.2% (66/1,070) asymptomatic Plasmodium infections, respectively, as compared to the detection rates of 1.3% (8/638) and 0.04% (4/1,070) by microscopy. This FP-PCR method was much more sensitive than microscopy in detecting Plasmodium infections. It drastically increased the detection sensitivity of asymptomatic infections in cross-sectional surveys conducted in Thailand and Myanmar, suggesting that this FP-PCR method has a potential for future applications in malaria epidemiology studies.

  3. Environmental Survey preliminary report, Oak Ridge Gaseous Diffusion Plant, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy's (DOE) Oak Ridge Gaseous Diffusion Plant (ORGDP) conducted March 14 through 25, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental risk associated with ORGDP. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORGDP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during is on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory (INEL). When completed, the results will be incorporated into the ORGDP Survey findings for in inclusion into the Environmental Survey Summary Report. 120 refs., 41 figs., 74 tabs

  4. Systematic sampling with errors in sample locations

    DEFF Research Database (Denmark)

    Ziegel, Johanna; Baddeley, Adrian; Dorph-Petersen, Karl-Anton

    2010-01-01

    analysis using point process methods. We then analyze three different models for the error process, calculate exact expressions for the variances, and derive asymptotic variances. Errors in the placement of sample points can lead to substantial inflation of the variance, dampening of zitterbewegung......Systematic sampling of points in continuous space is widely used in microscopy and spatial surveys. Classical theory provides asymptotic expressions for the variance of estimators based on systematic sampling as the grid spacing decreases. However, the classical theory assumes that the sample grid...... is exactly periodic; real physical sampling procedures may introduce errors in the placement of the sample points. This paper studies the effect of errors in sample positioning on the variance of estimators in the case of one-dimensional systematic sampling. First we sketch a general approach to variance...

  5. Development and Evaluation of a Novel Survey Tool Assessing Inpatient Consult Service Performance.

    Science.gov (United States)

    Miloslavsky, Eli M; Chang, Yuchiao

    2017-12-01

    Subspecialty consultation in inpatient medicine is increasing, and enhancing performance of consultation services may have a broad-reaching impact. Multisource feedback is an important tool in assessing competence and improving performance. A mechanism for primary team resident feedback on performance of consult services has not been described. We developed and evaluated an instrument designed to assess internal medicine (IM) subspecialty inpatient consult service performance. We hypothesized that the instrument would be feasible to administer and provide important information to fellowship directors. The instrument was administered in 2015 and 2016 at a single academic center. All IM residents were invited to evaluate 10 IM subspecialty consult services on 4 items and an overall satisfaction rating. The instrument allowed for free-text feedback to fellows. Program directors completed another survey assessing the impact of the consult service evaluation. A total of 113 residents responded (47 in 2015 and 66 in 2016, for a combined response rate of 35%). Each of the 4 items measured (communication, professionalism, teaching, and pushback) correlated significantly with the overall satisfaction rating in univariate and multivariate analyses. There were no differences in ratings across postgraduate year or year of administration. There was considerable variation in ratings among the services evaluated. The 7 program directors who provided feedback found the survey useful and made programmatic changes following evaluation implementation. A primary team resident evaluation of inpatient medicine subspecialty consult services is feasible, provides valuable information, and is associated with changes in consult service structure and curricula.

  6. Comparison of the performances of the CS model coil and the Good Joint SULTAN sample

    International Nuclear Information System (INIS)

    Wesche, Rainer; Herzog, Robert; Bruzzone, Pierluigi

    2008-01-01

    The relevance of short sample measurements in SULTAN for the prediction of the performance of the coils of the International Thermonuclear Experimental Reactor (ITER) is assessed using the case of the Nb 3 Sn high-field central solenoid model coil (CSMC) conductor, for which both coil performance and short sample SULTAN results (Good Joint (GJ) sample) are available. A least-squares fit procedure, based on a uniform current distribution among the strands and the Durham scaling relations for the field, temperature and strain dependences of the strand J c provides a thermal strain of -0.294% and a degradation factor of approximately 60% for the GJ sample. In the calculation of the voltage along Layer 1A of the CSMC the hoop stress and the variation of the magnetic field in the conductor cross-section were taken into account. The temperature profile, used in the calculations, is based on published temperature profiles and empirical relations between helium inlet and outlet temperatures. A comparison with the GJ results indicates that short sample measurements in SULTAN provide a conservative estimate of the coil performance

  7. Effects of procurement on project performance:a survey of Swedish construction clients

    OpenAIRE

    Eriksson, Per-Erik; Vennström, Anders

    2009-01-01

    In order to increase the efficiency of the construction industry development and improvement of procurement procedures is vital. The purpose of this investigation is to increase the understanding of how procurement procedures affect project performance. A procurement model including eight hypotheses is first developed on the basis of a literature review and then tested through multivariate statistical techniques based on empirical data collected through a survey investigation of 106 Swedish c...

  8. Inclusion of mobile phone numbers into an ongoing population health survey in New South Wales, Australia: design, methods, call outcomes, costs and sample representativeness.

    Science.gov (United States)

    Barr, Margo L; van Ritten, Jason J; Steel, David G; Thackway, Sarah V

    2012-11-22

    In Australia telephone surveys have been the method of choice for ongoing jurisdictional population health surveys. Although it was estimated in 2011 that nearly 20% of the Australian population were mobile-only phone users, the inclusion of mobile phone numbers into these existing landline population health surveys has not occurred. This paper describes the methods used for the inclusion of mobile phone numbers into an existing ongoing landline random digit dialling (RDD) health survey in an Australian state, the New South Wales Population Health Survey (NSWPHS). This paper also compares the call outcomes, costs and the representativeness of the resultant sample to that of the previous landline sample. After examining several mobile phone pilot studies conducted in Australia and possible sample designs (screening dual-frame and overlapping dual-frame), mobile phone numbers were included into the NSWPHS using an overlapping dual-frame design. Data collection was consistent, where possible, with the previous years' landline RDD phone surveys and between frames. Survey operational data for the frames were compared and combined. Demographic information from the interview data for mobile-only phone users, both, and total were compared to the landline frame using χ2 tests. Demographic information for each frame, landline and the mobile-only (equivalent to a screening dual frame design), and the frames combined (with appropriate overlap adjustment) were compared to the NSW demographic profile from the 2011 census using χ2 tests. In the first quarter of 2012, 3395 interviews were completed with 2171 respondents (63.9%) from the landline frame (17.6% landline only) and 1224 (36.1%) from the mobile frame (25.8% mobile only). Overall combined response, contact and cooperation rates were 33.1%, 65.1% and 72.2% respectively. As expected from previous research, the demographic profile of the mobile-only phone respondents differed most (more that were young, males, Aboriginal

  9. New workplace practices and firm performance in manufacturing:

    DEFF Research Database (Denmark)

    Pozzoli, Dario; Cristini, Annalisa

    Using data from the 2004 Workplace Employee Relations Survey on British establishments and two surveys on manufacturing firms located in the North of Italy, we look at the diffusion of new workplace practices in the two countries and at their impact on the firm's performance. We find that the Ita......Using data from the 2004 Workplace Employee Relations Survey on British establishments and two surveys on manufacturing firms located in the North of Italy, we look at the diffusion of new workplace practices in the two countries and at their impact on the firm's performance. We find...... that the Italian and British samples differ more in terms of composition of the set practices than in terms of overall incidence, but the statistical associations between some of the practices and the firm's performance are robust across countries. The counterfactual analysis shows that could the Italian firms...

  10. A two-stage cluster sampling method using gridded population data, a GIS, and Google EarthTM imagery in a population-based mortality survey in Iraq

    Directory of Open Access Journals (Sweden)

    Galway LP

    2012-04-01

    Full Text Available Abstract Background Mortality estimates can measure and monitor the impacts of conflict on a population, guide humanitarian efforts, and help to better understand the public health impacts of conflict. Vital statistics registration and surveillance systems are rarely functional in conflict settings, posing a challenge of estimating mortality using retrospective population-based surveys. Results We present a two-stage cluster sampling method for application in population-based mortality surveys. The sampling method utilizes gridded population data and a geographic information system (GIS to select clusters in the first sampling stage and Google Earth TM imagery and sampling grids to select households in the second sampling stage. The sampling method is implemented in a household mortality study in Iraq in 2011. Factors affecting feasibility and methodological quality are described. Conclusion Sampling is a challenge in retrospective population-based mortality studies and alternatives that improve on the conventional approaches are needed. The sampling strategy presented here was designed to generate a representative sample of the Iraqi population while reducing the potential for bias and considering the context specific challenges of the study setting. This sampling strategy, or variations on it, are adaptable and should be considered and tested in other conflict settings.

  11. Environmental Survey preliminary report, Stanford Linear Accelerator Center, Stanford, California

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    This report presents the preliminary findings from the first phase of the Survey of the US Department of Energy (DOE) Stanford Linear Accelerator Center (SLAC) at Stanford, California, conducted February 29 through March 4, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the SLAC. The Survey covers all environmental media and all areas of environmental regulation and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the SLAC, and interviews with site personnel. The Survey team is developing a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the SLAC facility. The Interim Report will reflect the final determinations of the SLAC Survey. 95 refs., 25 figs., 25 tabs.

  12. Environmental Survey preliminary report, Stanford Linear Accelerator Center, Stanford, California

    International Nuclear Information System (INIS)

    1988-07-01

    This report presents the preliminary findings from the first phase of the Survey of the US Department of Energy (DOE) Stanford Linear Accelerator Center (SLAC) at Stanford, California, conducted February 29 through March 4, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the SLAC. The Survey covers all environmental media and all areas of environmental regulation and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the SLAC, and interviews with site personnel. The Survey team is developing a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the SLAC facility. The Interim Report will reflect the final determinations of the SLAC Survey. 95 refs., 25 figs., 25 tabs

  13. 76 FR 47612 - AAR Manufacturing, Inc.; Completion of Radiological Survey Activities at CSX Transportation...

    Science.gov (United States)

    2011-08-05

    ... Plan list in August 1994. In May 1997, NRC inspectors performed a limited radiation survey of the CSXT..., 1997, letter; the report identified three locations with elevated levels of thorium in the soil (ADAMS... CSXT property. Based on the survey and sampling results, as well as an all- pathways analysis of the...

  14. Degree of patient satisfaction with health care performance assesed by marketing surveys.

    Science.gov (United States)

    Druguş, Daniela; Azoicăi, Doina

    2015-01-01

    Marketing surveys of the health system collect useful information to develop effective management strategies. The research aim consisted in measuring patient satisfaction with health care quality. The qualitative research was based on an online SurveyMonkey open-ended questionnaire. The analysis of patient satisfaction/dissatisfaction with healthcare professionals was performed in 1838 patients. Correlation analysis allowed the identification of some determinants associated with patient satisfaction. The variable most commonly associated with satisfaction was "I got adequate information about procedures/treatment" according to 32.2% of respondents. The patients who were dissatisfied most commonly complained that they were "Not adequately informed about maneuvers and treatment", reported by 40.0% of respondents. This study provides a basis for building an original model for determining the variables of an efficient healthcare system which to ensure a high degree of patient satisfaction.

  15. Survey of maternal sleep practices in late pregnancy in a multi-ethnic sample in South Auckland, New Zealand.

    Science.gov (United States)

    Cronin, Robin S; Chelimo, Carol; Mitchell, Edwin A; Okesene-Gafa, Kara; Thompson, John M D; Taylor, Rennae S; Hutchison, B Lynne; McCowan, Lesley M E

    2017-06-17

    The Auckland Stillbirth study demonstrated a two-fold increased risk of late stillbirth for women who did not go to sleep on their left side. Two further studies have confirmed an increased risk of late stillbirth with supine sleep position. As sleep position is modifiable, we surveyed self-reported late pregnancy sleep position, knowledge about sleep position, and views about changing going-to-sleep position. Participants in this 2014 survey were pregnant women (n = 377) in their third trimester from South Auckland, New Zealand, a multi-ethnic and predominantly low socio-economic population. An ethnically-representative sample was obtained using random sampling. Multivariable logistic regression was performed to identify factors independently associated with non-left sided going-to-sleep position in late pregnancy. Respondents were 28 to 42 weeks' gestation. Reported going-to-sleep position in the last week was left side (30%), right side (22%), supine (3%), either side (39%) and other (6%). Two thirds (68%) reported they had received advice about sleep position. Non-left sleepers were asked if they would be able to change to their left side if it was better for their baby; 87% reported they would have little or no difficulty changing. Women who reported a non-left going-to-sleep position were more likely to be of Maori (aOR 2.64 95% CI 1.23-5.66) or Pacific (aOR 2.91 95% CI 1.46-5.78) ethnicity; had a lower body mass index (BMI) (aOR 0.93 95% CI 0.89-0.96); and were less likely to sleep on the left-hand side of the bed (aOR 3.29 95% CI 2.03-5.32). Maternal going-to-sleep position in the last week was side-lying in 91% of participants. The majority had received advice to sleep on their side or avoid supine sleep position. Sleeping on the left-hand side of the bed was associated with going-to-sleep on the left side. Most non-left sleepers reported their sleeping position could be modified to the left side suggesting a public health intervention about sleep

  16. Attitudes to, and experience of, pooled sampling for sexually transmitted infection testing: a web-based survey of English sexual health services.

    Science.gov (United States)

    Shaw, Jonathan; Saunders, John Michael; Hughes, Gwenda

    2018-05-01

    Chlamydia trachomatis and Neisseria gonorrhoeae testing guidance recommends extragenital screening with locally validated nucleic acid amplification tests, with anatomical sites tested separately. Evidence supports multi-patient combined aliquot pooled sampling (PS) for population screening; evidence for within-patient PS is sparse. Within-patient PS could be more cost-effective for triple-site testing, but requires distinct clinical pathways and consideration over loss of information to guide risk assessments and treatment. We explored PS attitudes and practices amongst clinicians in England. A cross-sectional web-based survey was distributed to clinical leads of sexual health services throughout England in February 2016. Fifty-two (52/216, 23%) services responded. One service reported current within-patient PS and two were awaiting implementation. Of the 49 services not pooling, five were considering implementation. Concerns raised included the inability to distinguish infection site(s) (36/52, 69%), absence of national guidance (34/52, 65%) and reduced assay performance (18/52, 34%). Only 8/52 (15%) considered the current level of evidence sufficient to support PS, with 40/52 (77%) requesting further validation studies and 39/52 (77%) national guidance. PS was rarely used by respondents to this survey, although the response rate was low. The clinical challenges presented by PS need to be addressed through further development of the evidence base.

  17. Survey of natural and artificial radionuclide contents in soil samples from some areas of the AP Kosovo (Serbia)

    International Nuclear Information System (INIS)

    Adrovic, Feriz; Kosanovic, Katica; Jakupi, Bajram; Krstic, Gordana; Filipovic, Radmila

    2008-01-01

    After the war conflict in the Autonomous Province of Kosovo and Metohija (Serbia), NATO published data on locations where they used ammunition with depleted uranium. In these regions there were localized points of concentrated contamination, so called 'contamination points'. Taking into consideration the amounts of depleted uranium ammunition used by the NATO, obviously the number of these points in the area of Kosovo and Metohija is not negligible. Within the past 7 years there have been conducted various radiological and other surveys in this area. Majority of these surveys were focused around contamination points. The fact is that so far there has been surveyed only a small percentage of the contaminated area in this region, and apparently there are more contamination points outside the surveyed area. Taking into account the mobility of depleted uranium from contaminated areas by various transportation processes (underground waters, winds and diverse mechanical contacts of people, animals, and other activities), the idea of this work was to investigate possible contamination from depleted uranium not only at the locations indicated and published by the NATO in their reports, but also in the wider area around the zones of NATO strikes. In this paper we presented results of gamma spectrometry analysis of soil samples from wider area of the Autonomous Province of Kosovo and Metohija. We used semiconductor HpGe detector with 30% relative efficiency and the resolution FWHM(1332 keV)=1,78 keV. Spectral analysis were made on the basis of the present gamma lines, using a software package. The activity concentrations of the investigated radionuclides in the soil samples were ranged in the following intervals: 226 Ra from 19 to 55 Bq/kg, 235 U from 1,2 to 4,6 Bq/kg, 238 U from 26 to 95 Bq/kg, 40 K from 83 to 648 Bq/kg, 137 Cs from 1 to 176 Bq/kg. (author)

  18. Regional soil erosion assessment based on a sample survey and geostatistics

    Directory of Open Access Journals (Sweden)

    S. Yin

    2018-03-01

    Full Text Available Soil erosion is one of the most significant environmental problems in China. From 2010 to 2012, the fourth national census for soil erosion sampled 32 364 PSUs (Primary Sampling Units, small watersheds with the areas of 0.2–3 km2. Land use and soil erosion controlling factors including rainfall erosivity, soil erodibility, slope length, slope steepness, biological practice, engineering practice, and tillage practice for the PSUs were surveyed, and the soil loss rate for each land use in the PSUs was estimated using an empirical model, the Chinese Soil Loss Equation (CSLE. Though the information collected from the sample units can be aggregated to estimate soil erosion conditions on a large scale; the problem of estimating soil erosion condition on a regional scale has not been addressed well. The aim of this study is to introduce a new model-based regional soil erosion assessment method combining a sample survey and geostatistics. We compared seven spatial interpolation models based on the bivariate penalized spline over triangulation (BPST method to generate a regional soil erosion assessment from the PSUs. Shaanxi Province (3116 PSUs in China was selected for the comparison and assessment as it is one of the areas with the most serious erosion problem. Ten-fold cross-validation based on the PSU data showed the model assisted by the land use, rainfall erosivity factor (R, soil erodibility factor (K, slope steepness factor (S, and slope length factor (L derived from a 1 : 10 000 topography map is the best one, with the model efficiency coefficient (ME being 0.75 and the MSE being 55.8 % of that for the model assisted by the land use alone. Among four erosion factors as the covariates, the S factor contributed the most information, followed by K and L factors, and R factor made almost no contribution to the spatial estimation of soil loss. The LS factor derived from 30 or 90 m Shuttle Radar Topography Mission

  19. Psychometric evaluation of an inpatient consumer survey measuring satisfaction with psychiatric care.

    Science.gov (United States)

    Ortiz, Glorimar; Schacht, Lucille

    2012-01-01

    Measurement of consumers' satisfaction in psychiatric settings is important because it has been correlated with improved clinical outcomes and administrative measures of high-quality care. These consumer satisfaction measurements are actively used as performance measures required by the accreditation process and for quality improvement activities. Our objectives were (i) to re-evaluate, through exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), the structure of an instrument intended to measure consumers' satisfaction with care in psychiatric settings and (ii) to examine and publish the psychometric characteristics, validity and reliability, of the Inpatient Consumer Survey (ICS). To psychometrically test the structure of the ICS, 34 878 survey results, submitted by 90 psychiatric hospitals in 2008, were extracted from the Behavioral Healthcare Performance Measurement System (BHPMS). Basic descriptive item-response and correlation analyses were performed for total surveys. Two datasets were randomly created for analysis. A random sample of 8229 survey results was used for EFA. Another random sample of 8261 consumer survey results was used for CFA. This same sample was used to perform validity and reliability analyses. The item-response analysis showed that the mean range for a disagree/agree five-point scale was 3.10-3.94. Correlation analysis showed a strong relationship between items. Six domains (dignity, rights, environment, empowerment, participation, and outcome) with internal reliabilities between good to moderate (0.87-0.73) were shown to be related to overall care satisfaction. Overall reliability for the instrument was excellent (0.94). Results from CFA provided support for the domains structure of the ICS proposed through EFA. The overall findings from this study provide evidence that the ICS is a reliable measure of consumer satisfaction in psychiatric inpatient settings. The analysis has shown the ICS to provide valid and

  20. Explaining discrepancies in reproductive health indicators from population-based surveys and exit surveys: a case from Rwanda.

    Science.gov (United States)

    Meekers, D; Ogada, E A

    2001-06-01

    Reproductive health programmes often need exit surveys and population-based surveys for monitoring and evaluation. This study investigates why such studies produce discrepant estimates of condom use, sexual behaviour and condom brand knowledge, and discusses the implications for future use of exit surveys for programme monitoring. Logistic regression is used to explain differences between a household survey of 1295 persons and an exit survey among a random sample of 2550 consumers at retail outlets in RWANDA: Discrepancies in ever use of condoms and risky sexual behaviours are due to differences in socioeconomic status of the two samples. After controls, exit surveys at most outlet types have the same results as the household survey. Only exit surveys at bars, nightclubs and hotels yield significantly different estimates. However, the above-average knowledge of Prudence Plus condoms in the exit interviews is not attributable to socioeconomic or demographic variables, most likely because respondents have seen the product at the outlets. Information about condom use and sexual behaviour obtained from exit surveys appears as accurate as that obtained through household surveys. Nevertheless, exit surveys must be used cautiously. Because exit surveys may include wealthier and better-educated respondents, they are not representative of the general population. The composition of exit survey samples should be validated through existing household surveys. Comparisons across survey types are generally unadvisable, unless they control for sample differences. When generalizing to the population at large is not needed (e.g. for studies aimed at identifying the characteristics and behaviour of users of particular products or services), exit surveys can provide an appropriate alternative to household surveys.

  1. Small Scale Mixing Demonstration Batch Transfer and Sampling Performance of Simulated HLW - 12307

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Jesse; Townson, Paul; Vanatta, Matt [EnergySolutions, Engineering and Technology Group, Richland, WA, 99354 (United States)

    2012-07-01

    The ability to effectively mix, sample, certify, and deliver consistent batches of High Level Waste (HLW) feed from the Hanford Double Shell Tanks (DST) to the Waste treatment Plant (WTP) has been recognized as a significant mission risk with potential to impact mission length and the quantity of HLW glass produced. At the end of 2009 DOE's Tank Operations Contractor, Washington River Protection Solutions (WRPS), awarded a contract to EnergySolutions to design, fabricate and operate a demonstration platform called the Small Scale Mixing Demonstration (SSMD) to establish pre-transfer sampling capacity, and batch transfer performance data at two different scales. This data will be used to examine the baseline capacity for a tank mixed via rotational jet mixers to transfer consistent or bounding batches, and provide scale up information to predict full scale operational performance. This information will then in turn be used to define the baseline capacity of such a system to transfer and sample batches sent to WTP. The Small Scale Mixing Demonstration (SSMD) platform consists of 43'' and 120'' diameter clear acrylic test vessels, each equipped with two scaled jet mixer pump assemblies, and all supporting vessels, controls, services, and simulant make up facilities. All tank internals have been modeled including the air lift circulators (ALCs), the steam heating coil, and the radius between the wall and floor. The test vessels are set up to simulate the transfer of HLW out of a mixed tank, and collect a pre-transfer sample in a manner similar to the proposed baseline configuration. The collected material is submitted to an NQA-1 laboratory for chemical analysis. Previous work has been done to assess tank mixing performance at both scales. This work involved a combination of unique instruments to understand the three dimensional distribution of solids using a combination of Coriolis meter measurements, in situ chord length distribution

  2. A survey on blood group determination

    Science.gov (United States)

    Radhika, K.; Sowjanya, S. J.; Ramya, T.

    2018-04-01

    Detection of blood group is an essential factor in critical conditions before performing blood transfer. At presently tests are conducted by lab technicians manually in the laboratory. When the test is done by technicians with large samples it becomes monotonous to do and sometimes it leads to incorrect results and even its time consuming to get the result. The research survey proposal is to reduce the physical work to identify the blood group with a paper-based device. The paper is having a long thermometer with two ends. By using this we can detect the blood type by changing the color of the paper. Chemical reactions between dye, Bromo creosol green, and blood serum proteins, were performed to test the blood sample. The paper becomes teal or brown color, depending on whether the association of antibodies and antigens are present. It gives the result within 30 seconds, which is quicker than traditional detection system. The tested blood sample had a good accuracy rate.

  3. Consistently low prevalence of syphilis among female sex workers in Jinan, China: findings from two consecutive respondent driven sampling surveys.

    Directory of Open Access Journals (Sweden)

    Meizhen Liao

    Full Text Available BACKGROUND: Routine surveillance using convenient sampling found low prevalence of HIV and syphilis among female sex workers in China. Two consecutive surveys using respondent driven sampling were conducted in 2008 and 2009 to examine the prevalence of HIV and syphilis among female sex workers in Jinan, China. METHODS: A face-to-face interview was conducted to collect demographic, behavioral and service utilization information using a structured questionnaire. Blood samples were drawn for serological tests of HIV-1 antibody and syphilis antibody. Respondent Driven Sampling Analysis Tool was used to generate population level estimates. RESULTS: In 2008 and in 2009, 363 and 432 subjects were recruited and surveyed respectively. Prevalence of syphilis was 2.8% in 2008 and 2.2% in 2009, while no HIV case was found in both years. Results are comparable to those from routine sentinel surveillance system in the city. Only 60.8% subjects in 2008 and 48.3% in 2009 reported a consistent condom use with clients during the past month. Over 50% subjects had not been covered by any HIV-related services in the past year, with only 15.6% subjects in 2008 and 13.1% in 2009 ever tested for HIV. CONCLUSIONS: Despite the low prevalence of syphilis and HIV, risk behaviors are common. Targeted interventions to promote the safe sex and utilization of existing intervention services are still needed to keep the epidemic from growing.

  4. Comparative Study of Complex Survey Estimation Software in ONS

    Directory of Open Access Journals (Sweden)

    Andy Fallows

    2015-09-01

    Full Text Available Many official statistics across the UK Government Statistical Service (GSS are produced using data collected from sample surveys. These survey data are used to estimate population statistics through weighting and calibration techniques. For surveys with complex or unusual sample designs, the weighting can be fairly complicated. Even in more simple cases, appropriate software is required to implement survey weighting and estimation. As with other stages of the survey process, it is preferable to use a standard, generic calibration tool wherever possible. Standard tools allow for efficient use of resources and assist with the harmonisation of methods. In the case of calibration, the Office for National Statistics (ONS has experience of using the Statistics Canada Generalized Estimation System (GES across a range of business and social surveys. GES is a SAS-based system and so is only available in conjunction with an appropriate SAS licence. Given recent initiatives and encouragement to investigate open source solutions across government, it is appropriate to determine whether there are any open source calibration tools available that can provide the same service as GES. This study compares the use of GES with the calibration tool ‘R evolved Generalized software for sampling estimates and errors in surveys’ (ReGenesees available in R, an open source statistical programming language which is beginning to be used in many statistical offices. ReGenesees is a free R package which has been developed by the Italian statistics office (Istat and includes functionality to calibrate survey estimates using similar techniques to GES. This report describes analysis of the performance of ReGenesees in comparison to GES to calibrate a representative selection of ONS surveys. Section 1.1 provides a brief introduction to the current use of SAS and R in ONS. Section 2 describes GES and ReGenesees in more detail. Sections 3.1 and 3.2 consider methods for

  5. Borderline personality symptoms and work performance: a population-based survey.

    Science.gov (United States)

    Juurlink, Trees T; Ten Have, Margreet; Lamers, Femke; van Marle, Hein J F; Anema, Johannes R; de Graaf, Ron; Beekman, Aartjan T F

    2018-06-19

    This study aims to elucidate the interplay between borderline personality symptoms and working conditions as a pathway for impaired work performance among workers in the general population. Cross-sectional data from the Netherlands Mental Health Survey and Incidence Study-2 (NEMESIS-2) were used, including 3672 workers. Borderline personality symptoms were measured with the International Personality Disorder Examination (IPDE) questionnaire. Working conditions (decision latitude, psychological job demands, job security and co-worker support) were assessed with the Job Content Questionnaire (JCQ). Impaired work performance was assessed as total work loss days per month, defined as the sum of days of three types of impaired work performance (inability to work, cut-down to work, and diminished quality at work). These were assessed with the WHO Disability Assessment Schedule (WHO-DAS). Common mental disorders (CMD) were assessed with the Composite International Diagnostic Interview (CIDI). Number of borderline personality symptoms was consistently associated with impaired work performance, even after controlling for type or number of adverse working conditions and co-occurrence of CMD. Borderline personality symptoms were associated with low decision latitude, job insecurity and low co-worker support. The relationship between borderline personality symptoms and work performance diminished slightly after controlling for type or number of working conditions. The current study shows that having borderline personality symptoms is a unique determinant of work performance. This association seems partially explained through the impact of borderline personality symptoms on working conditions. Future studies are warranted to study causality and should aim at diminishing borderline personality symptoms and coping with working conditions.

  6. Chapter 27: Deja vu All Over Again: Using NVO Tools to Re-Investigate a Complete Sample of Texas Radio Survey Sources

    Science.gov (United States)

    Lucas, Ray A.; Rohde, David; Tamura, Takayuki; van Dyne, Jeffrey

    At the first NVO Summer School in September 2004, a complete sample of Texas Radio Survey sources, first derived in 1989 and subsequently observed with the VLA in A-array snapshot mode in 1990, was revisited. The original investigators had never had the occasion to reduce the A-array 5-minute snapshot data, nor to do any other significant follow-up, though the sample still seemed a possibly useful but relatively small study of radio galaxies, AGN, quasars, extragalactic sources, and galaxy clusters, etc. At the time of the original sample definition in late 1989, the best optical material available for the region was the SRC-J plate from the UK Schmidt Telescope in Australia. In much more recent times, the Sloan Digital Sky Survey has included the region in its DR2 data release, so good multicolor optical imaging in a number of standard bandpasses has finally become available. These data, along with other material in the radio, infrared, and (where available) were used to get a better preliminary idea of the nature of the objects in the 1989 sample. We also investigated one of the original questions: whether these radio sources with steeper (or at least non-flat) radio spectra were associated with galaxy clusters, and in some cases higher-redshift galaxy clusters and AGN. A rudimentary web service was created which allowed the user to perform simple cone searches and SIAP image extractions of specified field sizes for multiwavelength data across the electromagnetic spectrum, and a prototype web page was set up which would display the resulting images in wavelength order across the page for sources in the sample. Finally, as an additional investigation, using radio and X-ray IDs as a proxy for AGN which might be associated with large, central cluster galaxies, positional matches of radio and X-ray sources from two much larger catalogs were done using the tool TOPCAT in order to search for the degree of correlation between ID positions, radio luminosity, and cluster

  7. The Foundation Supernova Survey: motivation, design, implementation, and first data release

    Science.gov (United States)

    Foley, Ryan J.; Scolnic, Daniel; Rest, Armin; Jha, S. W.; Pan, Y.-C.; Riess, A. G.; Challis, P.; Chambers, K. C.; Coulter, D. A.; Dettman, K. G.; Foley, M. M.; Fox, O. D.; Huber, M. E.; Jones, D. O.; Kilpatrick, C. D.; Kirshner, R. P.; Schultz, A. S. B.; Siebert, M. R.; Flewelling, H. A.; Gibson, B.; Magnier, E. A.; Miller, J. A.; Primak, N.; Smartt, S. J.; Smith, K. W.; Wainscoat, R. J.; Waters, C.; Willman, M.

    2018-03-01

    The Foundation Supernova Survey aims to provide a large, high-fidelity, homogeneous, and precisely calibrated low-redshift Type Ia supernova (SN Ia) sample for cosmology. The calibration of the current low-redshift SN sample is the largest component of systematic uncertainties for SN cosmology, and new data are necessary to make progress. We present the motivation, survey design, observation strategy, implementation, and first results for the Foundation Supernova Survey. We are using the Pan-STARRS telescope to obtain photometry for up to 800 SNe Ia at z ≲ 0.1. This strategy has several unique advantages: (1) the Pan-STARRS system is a superbly calibrated telescopic system, (2) Pan-STARRS has observed 3/4 of the sky in grizyP1 making future template observations unnecessary, (3) we have a well-tested data-reduction pipeline, and (4) we have observed ˜3000 high-redshift SNe Ia on this system. Here, we present our initial sample of 225 SN Ia grizP1 light curves, of which 180 pass all criteria for inclusion in a cosmological sample. The Foundation Supernova Survey already contains more cosmologically useful SNe Ia than all other published low-redshift SN Ia samples combined. We expect that the systematic uncertainties for the Foundation Supernova Sample will be two to three times smaller than other low-redshift samples. We find that our cosmologically useful sample has an intrinsic scatter of 0.111 mag, smaller than other low-redshift samples. We perform detailed simulations showing that simply replacing the current low-redshift SN Ia sample with an equally sized Foundation sample will improve the precision on the dark energy equation-of-state parameter by 35 per cent, and the dark energy figure of merit by 72 per cent.

  8. The Apollo lunar samples collection analysis and results

    CERN Document Server

    Young, Anthony

    2017-01-01

    This book focuses on the specific mission planning for lunar sample collection, the equipment used, and the analysis and findings concerning the samples at the Lunar Receiving Laboratory in Texas. Anthony Young documents the collection of Apollo samples for the first time for readers of all backgrounds, and includes interviews with many of those involved in planning and analyzing the samples. NASA contracted with the U.S. Geologic Survey to perform classroom and field training of the Apollo astronauts. NASA’s Geology Group within the Manned Spacecraft Center in Houston, Texas, helped to establish the goals of sample collection, as well as the design of sample collection tools, bags, and storage containers. In this book, detailed descriptions are given on the design of the lunar sampling tools, the Modular Experiment Transporter used on Apollo 14, and the specific areas of the Lunar Rover vehicle used for the Apollo 15, 16, and 17 missions, which carried the sampling tools, bags, and other related equipment ...

  9. Air and smear sample calculational tool for Fluor Hanford Radiological control

    International Nuclear Information System (INIS)

    BAUMANN, B.L.

    2003-01-01

    A spreadsheet calculation tool was developed to automate the calculations performed for determining the concentration of airborne radioactivity and smear counting as outlined in HNF--13536, Section 5.2.7, ''Analyzing Air and Smear Samples''. This document reports on the design and testing of the calculation tool. Radiological Control Technicians (RCTs) will save time and reduce hand written and calculation errors by using an electronic form for documenting and calculating work place air samples. Current expectations are RCTs will perform an air sample and collect the filter or perform a smear for surface contamination. RCTs will then survey the filter for gross alpha and beta/gamma radioactivity and with the gross counts utilize either hand calculation method or a calculator to determine activity on the filter. The electronic form will allow the RCT with a few key strokes to document the individual's name, payroll, gross counts, instrument identifiers; produce an error free record. This productivity gain is realized by the enhanced ability to perform mathematical calculations electronically (reducing errors) and at the same time, documenting the air sample

  10. The relationships between pesticide metabolites and neurobehavioral test performance in the third National Health and Nutrition Examination Survey.

    Science.gov (United States)

    Krieg, Edward F

    2013-01-01

    Regression analysis was used to estimate and test for relationships between urinary pesticide metabolites and neurobehavioral test performance in adults, 20 to 59 years old, participating in the third National Health and Nutrition Examination Survey. The 12 pesticide metabolites included 2 naphthols, 8 phenols, a phenoxyacetic acid, and a pyridinol. The 3 neurobehavioral tests included in the survey were simple reaction time, symbol-digit substitution, and serial digit learning. As the 2,4-dichlorophenol, 2,5-dichlorophenol, and the pentachlorophenol concentrations increased, performance on the serial digit learning test improved. As the 2,5-dichlorophenol concentration increased, performance on the symbol-digit substitution test improved. At low concentrations, the parent compounds of these metabolites may act at acetylcholine and γ-aminobutyric acid synapses in the central nervous system to improve neurobehavioral test performance.

  11. Patient grouping for dose surveys and establishment of diagnostic reference levels in paediatric computed tomography

    International Nuclear Information System (INIS)

    Vassileva, J.; Rehani, M.

    2015-01-01

    There has been confusion in literature on whether paediatric patients should be grouped according to age, weight or other parameters when dealing with dose surveys. The present work aims to suggest a pragmatic approach to achieve reasonable accuracy for performing patient dose surveys in countries with limited resources. The analysis is based on a subset of data collected within the IAEA survey of paediatric computed tomography (CT) doses, involving 82 CT facilities from 32 countries in Asia, Europe, Africa and Latin America. Data for 6115 patients were collected, in 34.5 % of which data for weight were available. The present study suggests that using four age groups, <1, >1-5, >5-10 and >10-15 y, is realistic and pragmatic for dose surveys in less resource countries and for the establishment of DRLs. To ensure relevant accuracy of results, data for >30 patients in a particular age group should be collected if patient weight is not known. If a smaller sample is used, patient weight should be recorded and the median weight in the sample should be within 5-10 % from the median weight of the sample for which the DRLs were established. Comparison of results from different surveys should always be performed with caution, taking into consideration the way of grouping of paediatric patients. Dose results can be corrected for differences in patient weight/age group. (authors)

  12. Does Self-Selection Affect Samples’ Representativeness in Online Surveys? An Investigation in Online Video Game Research

    Science.gov (United States)

    van Singer, Mathias; Chatton, Anne; Achab, Sophia; Zullino, Daniele; Rothen, Stephane; Khan, Riaz; Billieux, Joel; Thorens, Gabriel

    2014-01-01

    Background The number of medical studies performed through online surveys has increased dramatically in recent years. Despite their numerous advantages (eg, sample size, facilitated access to individuals presenting stigmatizing issues), selection bias may exist in online surveys. However, evidence on the representativeness of self-selected samples in online studies is patchy. Objective Our objective was to explore the representativeness of a self-selected sample of online gamers using online players’ virtual characters (avatars). Methods All avatars belonged to individuals playing World of Warcraft (WoW), currently the most widely used online game. Avatars’ characteristics were defined using various games’ scores, reported on the WoW’s official website, and two self-selected samples from previous studies were compared with a randomly selected sample of avatars. Results We used scores linked to 1240 avatars (762 from the self-selected samples and 478 from the random sample). The two self-selected samples of avatars had higher scores on most of the assessed variables (except for guild membership and exploration). Furthermore, some guilds were overrepresented in the self-selected samples. Conclusions Our results suggest that more proficient players or players more involved in the game may be more likely to participate in online surveys. Caution is needed in the interpretation of studies based on online surveys that used a self-selection recruitment procedure. Epidemiological evidence on the reduced representativeness of sample of online surveys is warranted. PMID:25001007

  13. Impact of participant incentives and direct and snowball sampling on survey response rate in an ethnically diverse community: results from a pilot study of physical activity and the built environment.

    Science.gov (United States)

    Perez, Daniel F; Nie, Jason X; Ardern, Chris I; Radhu, Natasha; Ritvo, Paul

    2013-02-01

    Community-wide efforts to encourage healthy behaviours must respond to the needs of existing neighbourhoods, especially those where low physical activity (PA) is associated with social, economic, and cultural challenges. This study reports on the effect of direct and snowball sampling strategies and financial incentive levels on the response rates of a built environment and PA survey in a predominately urban, low-SES new-immigrant community. Women residing in the Jane-Finch neighbourhood of Toronto, Ontario were selected to participate by quasi-random sampling, yielding a response rate of 41.5%. The survey completion rate per contact attempt increased 2-fold when incentives were increased from $10 to $20 and a further threefold following the increase from $20 to $30. Snowball sampled respondents were older, less likely to have full-time employment, and had lower educational attainment than directly sampled participants. With appropriate incentives, face-to-face contact, and snowball sampling, survey-based research is feasible within a low-SES, high minority population.

  14. Model Complexity and Out-of-Sample Performance: Evidence from S&P 500 Index Returns

    NARCIS (Netherlands)

    Kaeck, Andreas; Rodrigues, Paulo; Seeger, Norman J.

    We apply a range of out-of-sample specification tests to more than forty competing stochastic volatility models to address how model complexity affects out-of-sample performance. Using daily S&P 500 index returns, model confidence set estimations provide strong evidence that the most important model

  15. Cloud service performance evaluation: status, challenges, and opportunities – a survey from the system modeling perspective

    Directory of Open Access Journals (Sweden)

    Qiang Duan

    2017-05-01

    Full Text Available With rapid advancement of Cloud computing and networking technologies, a wide spectrum of Cloud services have been developed by various providers and utilized by numerous organizations as indispensable ingredients of their information systems. Cloud service performance has a significant impact on performance of the future information infrastructure. Thorough evaluation on Cloud service performance is crucial and beneficial to both service providers and consumers; thus forming an active research area. Some key technologies for Cloud computing, such as virtualization and the Service-Oriented Architecture (SOA, bring in special challenges to service performance evaluation. A tremendous amount of effort has been put by the research community to address these challenges and exciting progress has been made. Among the work on Cloud performance analysis, evaluation approaches developed with a system modeling perspective play an important role. However, related works have been reported in different sections of the literature; thus lacking a big picture that shows the latest status of this area. The objectives of this article is to present a survey that reflects the state of the art of Cloud service performance evaluation from the system modeling perspective. This articles also examines open issues and challenges to the surveyed evaluation approaches and identifies possible opportunities for future research in this important field.

  16. Survalytics: An Open-Source Cloud-Integrated Experience Sampling, Survey, and Analytics and Metadata Collection Module for Android Operating System Apps.

    Science.gov (United States)

    O'Reilly-Shah, Vikas; Mackey, Sean

    2016-06-03

    We describe here Survalytics, a software module designed to address two broad areas of need. The first area is in the domain of surveys and app analytics: developers of mobile apps in both academic and commercial environments require information about their users, as well as how the apps are being used, to understand who their users are and how to optimally approach app development. The second area of need is in the field of ecological momentary assessment, also referred to as experience sampling: researchers in a wide variety of fields, spanning from the social sciences to psychology to clinical medicine, would like to be able to capture daily or even more frequent data from research subjects while in their natural environment. Survalytics is an open-source solution for the collection of survey responses as well as arbitrary analytic metadata from users of Android operating system apps. Surveys may be administered in any combination of one-time questions and ongoing questions. The module may be deployed as a stand-alone app for experience sampling purposes or as an add-on to existing apps. The module takes advantage of free-tier NoSQL cloud database management offered by the Amazon Web Services DynamoDB platform to package a secure, flexible, extensible data collection module. DynamoDB is capable of Health Insurance Portability and Accountability Act compliant storage of personal health information. The provided example app may be used without modification for a basic experience sampling project, and we provide example questions for daily collection of blood glucose data from study subjects. The module will help researchers in a wide variety of fields rapidly develop tailor-made Android apps for a variety of data collection purposes.

  17. Survalytics: An Open-Source Cloud-Integrated Experience Sampling, Survey, and Analytics and Metadata Collection Module for Android Operating System Apps

    Science.gov (United States)

    Mackey, Sean

    2016-01-01

    Background We describe here Survalytics, a software module designed to address two broad areas of need. The first area is in the domain of surveys and app analytics: developers of mobile apps in both academic and commercial environments require information about their users, as well as how the apps are being used, to understand who their users are and how to optimally approach app development. The second area of need is in the field of ecological momentary assessment, also referred to as experience sampling: researchers in a wide variety of fields, spanning from the social sciences to psychology to clinical medicine, would like to be able to capture daily or even more frequent data from research subjects while in their natural environment. Objective Survalytics is an open-source solution for the collection of survey responses as well as arbitrary analytic metadata from users of Android operating system apps. Methods Surveys may be administered in any combination of one-time questions and ongoing questions. The module may be deployed as a stand-alone app for experience sampling purposes or as an add-on to existing apps. The module takes advantage of free-tier NoSQL cloud database management offered by the Amazon Web Services DynamoDB platform to package a secure, flexible, extensible data collection module. DynamoDB is capable of Health Insurance Portability and Accountability Act compliant storage of personal health information. Results The provided example app may be used without modification for a basic experience sampling project, and we provide example questions for daily collection of blood glucose data from study subjects. Conclusions The module will help researchers in a wide variety of fields rapidly develop tailor-made Android apps for a variety of data collection purposes. PMID:27261155

  18. Genotyping of Toxoplasma Gondii Isolates from Soil Samples in Tehran, Iran

    Directory of Open Access Journals (Sweden)

    M Tavalla

    2013-06-01

    Full Text Available Background: The protozoan parasite Toxoplasma gondii can infect any warm blooded nucleated cells. One of the ways for human infection is ingestion of oocysts directly from soil or via infected fruits or vegetables. To survey the potential role of T. gondii oocyst in soil samples, the present study was conducted in Tehran City, Iran.Methods: A total of 150 soil samples were collected around rubbish dumps, children's play ground, parks and public places. Oocysts recovery was performed by sodium nitrate flotation method on soil samples. For molecular detection, PCR reaction targeting B1 gene was performed and then, the posi­tive results were confirmed using repetitive 529 bp DNA fragment in other PCR reaction. Finally, the positive samples were genotyped at the SAG2 locus.Results: Toxoplasma DNA was found in 13 soil samples. After genotyping and RFLP analysis in SAG2 locus, nine positive samples were revealed type III, one positive sample was type I whereas three samples revealed mixed infection (type, I & III.Conclusion: The predominant genotype in Tehran soil samples is type III.

  19. Environmental Survey preliminary report, Oak Ridge Gaseous Diffusion Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1989-02-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy's (DOE) Oak Ridge Gaseous Diffusion Plant (ORGDP) conducted March 14 through 25, 1988. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental risk associated with ORGDP. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORGDP, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during is on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory (INEL). When completed, the results will be incorporated into the ORGDP Survey findings for in inclusion into the Environmental Survey Summary Report. 120 refs., 41 figs., 74 tabs.

  20. Penggunaan Metode Respondent Driven Sampling (Rds dalam Survey Pemasaran Beras di Provinsi Kepulauan Riau

    Directory of Open Access Journals (Sweden)

    Herena Pudjihastuti

    2014-06-01

    Full Text Available As a Free Trade Zone (FTZ, the province of Riau Islands has a different pattern of strategic commodity (such as rice marketing comparing to other regions in Indonesia. To anticipate and control the negative effects of the implementation of FTZ policy, It is necessary to study about rice marketing trade system in the Riau Islands region. The study was conducted to identify patterns of supply and marketing of food (rice and analyze the marketing margin and marketing efficiency as well as the factors that influence it. The study was conducted through desk study and field surveys. Secondary data was collected from various sources and primary data collected through interviews with selected respondents using Respondent Driven Sampling method (RDS. The study shows that the structure of the rice market in Riau Islands can be categorized as monopolistic. Most of the rice supply comes from outside the region and import, the supply chain is quite simple, the price is relatively stable and relatively efficient marketing and resilience of rice reserves are relatively high for merchants. Nevertheless, the Riau islands will be very susceptible to interference distribution. Required efforts of the provincial government of Riau Islands to provide sufficient rice reserves. This paper gives an example of the use of the RDS method in marketing surveys.

  1. Survey of aflatoxins in retail samples of whole and ground black and white peppercorns.

    Science.gov (United States)

    Adzahan, N; Jalili, M; Jinap, S

    2009-01-01

    A total of 126 local and imported samples of commercial white and black pepper in Malaysia were analysed for aflatoxins B1, B2, G1 and G2 (AFB1, AFB2, AFG1, AFG2) content using high-performance liquid chromatography (HPLC) with a fluorescence detector (FD). An acetonitrile-methanol-water (17 : 29 : 54; v/v) mixture was used as a mobile phase and clean-up was using an immunoaffinity column (IAC). Seventy out of 126 (55.5%) samples were contaminated with total aflatoxins, although only low levels of aflatoxins were found ranging from 0.1 to 4.9 ng g(-1). Aflatoxin B1 showed the highest incidence of contamination and was found in all contaminated samples. There was a significant difference between type of samples and different brands (p < 0.05). The results showed black peppers were more contaminated than white peppers.

  2. Optimising cluster survey design for planning schistosomiasis preventive chemotherapy.

    Directory of Open Access Journals (Sweden)

    Sarah C L Knowles

    2017-05-01

    Full Text Available The cornerstone of current schistosomiasis control programmes is delivery of praziquantel to at-risk populations. Such preventive chemotherapy requires accurate information on the geographic distribution of infection, yet the performance of alternative survey designs for estimating prevalence and converting this into treatment decisions has not been thoroughly evaluated.We used baseline schistosomiasis mapping surveys from three countries (Malawi, Côte d'Ivoire and Liberia to generate spatially realistic gold standard datasets, against which we tested alternative two-stage cluster survey designs. We assessed how sampling different numbers of schools per district (2-20 and children per school (10-50 influences the accuracy of prevalence estimates and treatment class assignment, and we compared survey cost-efficiency using data from Malawi. Due to the focal nature of schistosomiasis, up to 53% simulated surveys involving 2-5 schools per district failed to detect schistosomiasis in low endemicity areas (1-10% prevalence. Increasing the number of schools surveyed per district improved treatment class assignment far more than increasing the number of children sampled per school. For Malawi, surveys of 15 schools per district and 20-30 children per school reliably detected endemic schistosomiasis and maximised cost-efficiency. In sensitivity analyses where treatment costs and the country considered were varied, optimal survey size was remarkably consistent, with cost-efficiency maximised at 15-20 schools per district.Among two-stage cluster surveys for schistosomiasis, our simulations indicated that surveying 15-20 schools per district and 20-30 children per school optimised cost-efficiency and minimised the risk of under-treatment, with surveys involving more schools of greater cost-efficiency as treatment costs rose.

  3. Survey Relationship between IT-business Alignment and Business Performance: Using Structural Equation Model

    Directory of Open Access Journals (Sweden)

    amir manian

    2009-09-01

    Full Text Available In spite of importance of IT deployment, nowadays in many organizations we are witness of appearing problems related to dissatisfaction of business needs due to high investment in the field of IT. The fervent debate concerning IT productivity–or lack of such productivity- named productivity paradox persuade us to survey relationship between IT–business alignment and business performance. The purpose of this research is to investigate whether IT-business alignment could have a decisive influence on their performance in IT-base firms by adopting a contingency theory perspective and operationalizing the fit systemically. Also to measure organizational performance, we adopt BSC framework which is not applied in this matter yet. Finally, this paper will explore the notion that alignment between business and IT is the key to achieving improved business performance through IT.

  4. Survey Methods, Traditional, Public Opinion Polling

    DEFF Research Database (Denmark)

    Elmelund-Præstekær, Christian; Hopmann, David Nicolas; Pedersen, Rasmus Tue

    2017-01-01

    Traditional public opinion polls are surveys in which a random sample of a given population is asked questions about their attitudes, knowledge, or behavior. If conducted properly, the answers from such surveys are approximately representative of the entire population. Traditional public opinion...... polling is typically based on four different methods of data gathering, or combinations hereof: face-to-face, postal surveys, phone surveys, and web surveys. Given that opinion polls are based on a sample, we cannot be sure that the sample reflects public opinion perfectly, however—even if randomness...... is perfect. Moreover, responses may be highly dependent on the contextual information provided with the question. Also, it may be difficult to capture past or complex causes of attitudes or behavior. In short, surveys are a precise way of measuring public opinion, but they do not come without challenges....

  5. Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

    International Nuclear Information System (INIS)

    Mccoy, J.C.

    1997-01-01

    The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

  6. Geochemical reanalysis of historical U.S. Geological Survey sediment samples from the Haines area, Juneau and Skagway quadrangles, southeast Alaska

    Science.gov (United States)

    Werdon, Melanie B.; Granitto, Matthew; Azain, Jaime S.

    2015-01-01

    The State of Alaska’s Strategic and Critical Minerals (SCM) Assessment project, a State-funded Capital Improvement Project (CIP), is designed to evaluate Alaska’s statewide potential for SCM resources. The SCM Assessment is being implemented by the Alaska Division of Geological & Geophysical Surveys (DGGS), and involves obtaining new airborne-geophysical, geological, and geochemical data. As part of the SCM Assessment, thousands of historical geochemical samples from DGGS, U.S. Geological Survey (USGS), and U.S. Bureau of Mines archives are being reanalyzed by DGGS using modern, quantitative, geochemical-analytical methods. The objective is to update the statewide geochemical database to more clearly identify areas in Alaska with SCM potential. The USGS is also undertaking SCM-related geologic studies in Alaska through the federally funded Alaska Critical Minerals cooperative project. DGGS and USGS share the goal of evaluating Alaska’s strategic and critical minerals potential and together created a Letter of Agreement (signed December 2012) and a supplementary Technical Assistance Agreement (#14CMTAA143458) to facilitate the two agencies’ cooperative work. Under these agreements, DGGS contracted the USGS in Denver to reanalyze historical USGS sediment samples from Alaska. For this report, DGGS funded reanalysis of 212 historical USGS sediment samples from the statewide Alaska Geochemical Database Version 2.0 (AGDB2; Granitto and others, 2013). Samples were chosen from the Chilkat, Klehini, Tsirku, and Takhin river drainages, as well as smaller drainages flowing into Chilkat and Chilkoot Inlets near Haines, Skagway Quadrangle, Southeast Alaska. Additionally some samples were also chosen from the Juneau gold belt, Juneau Quadrangle, Southeast Alaska (fig. 1). The USGS was responsible for sample retrieval from the National Geochemical Sample Archive (NGSA) in Denver, Colorado through the final quality assurance/quality control (QA/QC) of the geochemical

  7. Comparing distribution models for small samples of overdispersed counts of freshwater fish

    Science.gov (United States)

    Vaudor, Lise; Lamouroux, Nicolas; Olivier, Jean-Michel

    2011-05-01

    The study of species abundance often relies on repeated abundance counts whose number is limited by logistic or financial constraints. The distribution of abundance counts is generally right-skewed (i.e. with many zeros and few high values) and needs to be modelled for statistical inference. We used an extensive dataset involving about 100,000 fish individuals of 12 freshwater fish species collected in electrofishing points (7 m 2) during 350 field surveys made in 25 stream sites, in order to compare the performance and the generality of four distribution models of counts (Poisson, negative binomial and their zero-inflated counterparts). The negative binomial distribution was the best model (Bayesian Information Criterion) for 58% of the samples (species-survey combinations) and was suitable for a variety of life histories, habitat, and sample characteristics. The performance of the models was closely related to samples' statistics such as total abundance and variance. Finally, we illustrated the consequences of a distribution assumption by calculating confidence intervals around the mean abundance, either based on the most suitable distribution assumption or on an asymptotical, distribution-free (Student's) method. Student's method generally corresponded to narrower confidence intervals, especially when there were few (≤3) non-null counts in the samples.

  8. On Survey Data Analysis in Corporate Finance

    OpenAIRE

    Serita, Toshio

    2008-01-01

    Recently, survey data analysis has emerged as a new method for testing hypotheses andfor clarifying the relative importance of different factors in corporate finance decisions. This paper investigates the advantages and drawbacks of survey data analysis, methodology of survey data analysis such as questionnaire design, and analytical methods for survey data, incomparison with traditional large sample analysis. We show that survey data analysis does not replace traditional large sample analysi...

  9. Probability Sampling Method for a Hidden Population Using Respondent-Driven Sampling: Simulation for Cancer Survivors.

    Science.gov (United States)

    Jung, Minsoo

    2015-01-01

    When there is no sampling frame within a certain group or the group is concerned that making its population public would bring social stigma, we say the population is hidden. It is difficult to approach this kind of population survey-methodologically because the response rate is low and its members are not quite honest with their responses when probability sampling is used. The only alternative known to address the problems caused by previous methods such as snowball sampling is respondent-driven sampling (RDS), which was developed by Heckathorn and his colleagues. RDS is based on a Markov chain, and uses the social network information of the respondent. This characteristic allows for probability sampling when we survey a hidden population. We verified through computer simulation whether RDS can be used on a hidden population of cancer survivors. According to the simulation results of this thesis, the chain-referral sampling of RDS tends to minimize as the sample gets bigger, and it becomes stabilized as the wave progresses. Therefore, it shows that the final sample information can be completely independent from the initial seeds if a certain level of sample size is secured even if the initial seeds were selected through convenient sampling. Thus, RDS can be considered as an alternative which can improve upon both key informant sampling and ethnographic surveys, and it needs to be utilized for various cases domestically as well.

  10. The Selected Method and Tools for Performance Measurement in the Green Supply Chain—Survey Analysis in Poland

    Directory of Open Access Journals (Sweden)

    Blanka Tundys

    2018-02-01

    Full Text Available The methods and tools for the performance measurement and evaluation of the green supply chain management are very important elements for the construction and function of this type of supply chain. The result is a presentation of the considerations underlying a very general model, which presents some selected tools, but no breakdown of individual industries. The considerations undertaken are important and have scientific added value as usually in practice, a very large number of tools are used to assess the supply chain, which are not always correlated or adapted to the specificity of the chain. It is worth pointing out which of the already used or completely new tools and methods will be most useful for assessing the green supply chain. The structure of the paper covers the theoretical and empirical. It includes an introduction, our goals and hypotheses, state of the art, methodology, empirical findings, and discussion. We present the definitional differences between green and sustainable supply chains and focus on the selection and identification of methods for the framework model for evaluating the green supply chain. In the next step, the theoretical and selected method and tools were compared to a survey of Poland. On the basis of the survey, we present the findings and discussions found in this area. The main methodology used includes a literature review, a survey analysis using a questionnaire and statistical tools. The survey was carried out in 2015 in sample organizations in Poland. The research results showed that organizations were aware of the environmental elements of measuring and assessing the supply chain from an environmental point of view, but their use depended on many factors: the area, size of the organization, or the industry. If certain boundary conditions are met and the organizations are aware of the essence of environmental aspects in the chain, then they are applying green measures to the supply chain. These findings

  11. Soil sampling

    International Nuclear Information System (INIS)

    Fortunati, G.U.; Banfi, C.; Pasturenzi, M.

    1994-01-01

    This study attempts to survey the problems associated with techniques and strategies of soil sampling. Keeping in mind the well defined objectives of a sampling campaign, the aim was to highlight the most important aspect of representativeness of samples as a function of the available resources. Particular emphasis was given to the techniques and particularly to a description of the many types of samplers which are in use. The procedures and techniques employed during the investigations following the Seveso accident are described. (orig.)

  12. Association between attempted suicide and academic performance indicators among middle and high school students in Mexico: results from a national survey.

    Science.gov (United States)

    Orozco, Ricardo; Benjet, Corina; Borges, Guilherme; Moneta Arce, María Fátima; Fregoso Ito, Diana; Fleiz, Clara; Villatoro, Jorge Ameth

    2018-01-01

    Students' mental health is associated to academic performance. In high income countries, higher students' grades are related to lower odds of suicidal behaviors, but studies on other indicators of academic performance are more limited, specially in middle income countries. Data from 28,519 middle and high school students selected with multistage clustered sampling in the Mexican National Survey of Student's Drug Use. Using a self-administered questionnaire, lifetime suicidal attempt and four indicators of academic performance were assessed: age inconsistency with grade level, not being a student in the last year, perceived academic performance and number of failed courses. Multiple logistic regression models were used to control for sociodemographic and school characteristics. The lifetime prevalence of attempted suicide was 3.0% for middle school students and 4.2% for high school students. Among middle school students, statistically adjusted significant associations of suicide attempt with academic performance indicators were: not being a student the year before, worse self-perceived performance and a higher number of failed courses; among high school students, predictors were failed courses and self-perceived academic performance, with ORs of 1.65 and 1.96 for the categories of good and fair/poor respectively, compared to those who reported very good performance. Self-perceived academic performance was the main indicator for suicide in both school levels. Suicide prevention efforts in Mexico's schools should include asking students about the perception they have about their own academic performance.

  13. New methods for sampling sparse populations

    Science.gov (United States)

    Anna Ringvall

    2007-01-01

    To improve surveys of sparse objects, methods that use auxiliary information have been suggested. Guided transect sampling uses prior information, e.g., from aerial photographs, for the layout of survey strips. Instead of being laid out straight, the strips will wind between potentially more interesting areas. 3P sampling (probability proportional to prediction) uses...

  14. Enhancing sampling design in mist-net bat surveys by accounting for sample size optimization

    OpenAIRE

    Trevelin, Leonardo Carreira; Novaes, Roberto Leonan Morim; Colas-Rosas, Paul François; Benathar, Thayse Cristhina Melo; Peres, Carlos A.

    2017-01-01

    The advantages of mist-netting, the main technique used in Neotropical bat community studies to date, include logistical implementation, standardization and sampling representativeness. Nonetheless, study designs still have to deal with issues of detectability related to how different species behave and use the environment. Yet there is considerable sampling heterogeneity across available studies in the literature. Here, we approach the problem of sample size optimization. We evaluated the co...

  15. Confirmatory Survey Results for the Reactor Building Dome Upper Structural Surfaces, Rancho Saco Nuclear Generating Station, Herald, California

    International Nuclear Information System (INIS)

    Wade C. Adams

    2006-01-01

    Results from a confirmatory survey of the upper structural surfaces of the Reactor Building Dome at the Rancho Seco Nuclear Generating Station (RSNGS) performed by the Oak Ridge Institute for Science and Education for the NRC. Also includes results of interlaboratory comparison analyses on several archived soil samples that would be provided by RSNGS personnel. The confirmatory surveys were performed on June 7 and 8, 2006

  16. Mass Functions of the Active Black Holes in Distant Quasars from the Large Bright Quasar Survey, the Bright Quasar Survey, and the Color-Selected Sample of the SDSS Fall Equatorial Stripe

    DEFF Research Database (Denmark)

    Vestergaard, Marianne; Osmer, Patrick S.

    2009-01-01

    We present mass functions of distant actively accreting supermassive black holes residing in luminous quasars discovered in the Large Bright Quasar Survey, the Bright Quasar Survey, and the Fall Equatorial Stripe of the Sloan Digital Sky Survey (SDSS). The quasars cover a wide range of redshifts (0...... functions at similar redshifts based on the SDSS Data Release 3 quasar catalog presented by Vestergaard et al. We see clear evidence of cosmic downsizing in the comoving space density distribution of active black holes in the LBQS sample alone. In forthcoming papers, further analysis, comparison......, and discussion of these mass functions will be made with other existing black hole mass functions, notably that based on the SDSS DR3 quasar catalog. We present the relationships used to estimate the black hole mass based on the MgII emission line; the relations are calibrated to the Hbeta and CIV relations...

  17. Evaluating the performance of species richness estimators: sensitivity to sample grain size

    DEFF Research Database (Denmark)

    Hortal, Joaquín; Borges, Paulo A. V.; Gaspar, Clara

    2006-01-01

    and several recent estimators [proposed by Rosenzweig et al. (Conservation Biology, 2003, 17, 864-874), and Ugland et al. (Journal of Animal Ecology, 2003, 72, 888-897)] performed poorly. 3.  Estimations developed using the smaller grain sizes (pair of traps, traps, records and individuals) presented similar....... Data obtained with standardized sampling of 78 transects in natural forest remnants of five islands were aggregated in seven different grains (i.e. ways of defining a single sample): islands, natural areas, transects, pairs of traps, traps, database records and individuals to assess the effect of using...

  18. Sample selection may bias the outcome of an adolescent mental health survey: results from a five-year follow-up of 4171 adolescents.

    Science.gov (United States)

    Kekkonen, V; Kivimäki, P; Valtonen, H; Hintikka, J; Tolmunen, T; Lehto, S M; Laukkanen, E

    2015-02-01

    The representativeness of the data is one of the main issues in evaluating the significance of research findings. Dropping out is common in adolescent mental health research, and may distort the results. Nevertheless, very little is known about the types of systematic bias that may affect studies in a) the informed consent phase and b) later in follow-up phases. The authors addressed this gap in knowledge in a five-year follow-up study on a sample of adolescents aged 13-18 years. The data were collected using self-report questionnaires. The baseline sample consisted of 4171 adolescents, 1827 (43.8%) of whom gave consent to be contacted for a follow-up survey, but only 797 (19.1%) participated in the follow-up. Binary logistic regression models were used to explain the participation. Young age, female gender, a high number of hobbies, good performance at school in the native language and general subjects, family disintegration such as divorce, high parental employment, and symptoms of depression and anxiety were associated with both consent and participation. However, the effect of mental health aspects was smaller than the effect of age and gender. This study confirmed the possibility of systematic selection bias by adolescents' sociodemographic characteristics. The representativeness of the study sample might have been improved by more intense recruitment strategies. Copyright © 2014 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  19. Types of non-probabilistic sampling used in marketing research. „Snowball” sampling

    OpenAIRE

    Manuela Rozalia Gabor

    2007-01-01

    A significant way of investigating a firm’s market is the statistical sampling. The sampling typology provides a non / probabilistic models of gathering information and this paper describes thorough information related to network sampling, named “snowball” sampling. This type of sampling enables the survey of occurrence forms concerning the decision power within an organisation and of the interpersonal relation network governing a certain collectivity, a certain consumer panel. The snowball s...

  20. National-scale vegetation change across Britain; an analysis of sample-based surveillance data from the Countryside Surveys of 1990 and 1998

    NARCIS (Netherlands)

    Smart, S.M.; Clarke, R.T.; Poll, van de H.M.; Robertson, E.J.; Shield, E.R.; Bunce, R.G.H.; Maskell, L.C.

    2003-01-01

    Patterns of vegetation across Great Britain (GB) between 1990 and 1998 were quantified based on an analysis of plant species data from a total of 9596 fixed plots. Plots were established on a stratified random basis within 501 1 km sample squares located as part of the Countryside Survey of GB.

  1. Aerial radiological survey of the La Salle County Station and surrounding area, Seneca, Illinois. Date of survey: July 1981

    International Nuclear Information System (INIS)

    Hobaugh, J.L.

    1982-06-01

    An aerial radiological survey was performed from 14 to 31 July 1981 over a 270-square-kilometer area centered on the La Salle County Station near Seneca, Illinois. The survey was conducted by EG and G for the US Nuclear Regulatory Commission. All gamma ray data were collected by flying lines spaced 152 meters (500 ft) apart at an altitude of 91 meters (300 ft) above ground level. Processed data showed that all gamma rays detected within the survey area were those expected from naturally occurring background emitters. Count rates obtained from the aerial platform were converted to exposure rates at 1 meter above the ground and are presented in the form of an isoradiation contour map. The observed exposure rates for the survey area were between 5 and 14 microroentgens per hour (μR/h), with most of the area ranging from 8 to 14 μR/h. The exposure rate obtained from soil samples taken from within the survey site displayed positive agreement with the aerial data

  2. CALIFA: a diameter-selected sample for an integral field spectroscopy galaxy survey

    Czech Academy of Sciences Publication Activity Database

    Walcher, C.J.; Wisotzki, L.; Bekeraite, S.; Husemann, B.; Iglesias-Paramo, J.; Backsmann, N.; Barrera-Ballesteros, J.; Catalán-Torrecilla, C.; Cortijo-Ferrero, C.; del Olmo, A.; Garcia Lorenzo, B.; Falcon-Barroso, J.; Jílková, J.; Kalinová, V.; Mast, D.; Marino, R.A.; Méndez-Abreu, J.; Pasqual, A.; Sanchez, S.F.; Trager, S.; Zibetti, S.; Aguerri, J.A.L.; Alves, J.; Bland-Hawthorn, J.; Boselli, A.; Castillo-Morales, A.; Fernandes, R.C.; Flores, H.; Galbany, L.; Gallazzi, A.; Garcia-Benito, R.; Gil de Paz, A.; Gonzalez Delgado, R.; Jahnke, K.; Jungwiert, Bruno

    2014-01-01

    Roč. 569, September (2014), A1/1-A1/18 ISSN 0004-6361 Institutional support: RVO:67985815 Keywords : surveys * digital sky survey * active galactic nuclei Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 4.378, year: 2014

  3. TQM and firms performance: An EFQM excellence model research based survey

    Directory of Open Access Journals (Sweden)

    Santos-Vijande, M. L.

    2007-01-01

    Full Text Available The purpose of this article is to develop an instrument for measuring TQM implementation following the European Foundation for Quality Management Excellence Model and to provide empirical evidence on the relationship between management practices and measures of business performance in the model. To this end, the study employs survey data collected from Spanish manufacturing and service firms. Confirmatory factor analysis is used to test the psychometric properties of the measurement scales and the hypothesized relationships between total quality management practices and organizational performance are examined using structural equation modeling. The findings of the research indicate that the adoption of the TQM practices suggested in the EFQM Excellence Model allows firms to outperform their competitors in the results criteria included in the Model. Therefore, this paper provides a valuable benchmarking data for firms as it substantiates the EFQM Enabler’s contribution to the attainment of competitive advantage.

  4. Characteristic Performance Evaluation of a new SAGe Well Detector for Small and Large Sample Geometries

    International Nuclear Information System (INIS)

    Adekola, A.S.; Colaresi, J.; Douwen, J.; Jaederstroem, H.; Mueller, W.F.; Yocum, K.M.; Carmichael, K.

    2015-01-01

    Environmental scientific research requires a detector that has sensitivity low enough to reveal the presence of any contaminant in the sample at a reasonable counting time. Canberra developed the germanium detector geometry called Small Anode Germanium (SAGe) Well detector, which is now available commercially. The SAGe Well detector is a new type of low capacitance germanium well detector manufactured using small anode technology capable of advancing many environmental scientific research applications. The performance of this detector has been evaluated for a range of sample sizes and geometries counted inside the well, and on the end cap of the detector. The detector has energy resolution performance similar to semi-planar detectors, and offers significant improvement over the existing coaxial and Well detectors. Energy resolution performance of 750 eV Full Width at Half Maximum (FWHM) at 122 keV γ-ray energy and resolution of 2.0 - 2.3 keV FWHM at 1332 keV γ-ray energy are guaranteed for detector volumes up to 425 cm 3 . The SAGe Well detector offers an optional 28 mm well diameter with the same energy resolution as the standard 16 mm well. Such outstanding resolution performance will benefit environmental applications in revealing the detailed radionuclide content of samples, particularly at low energy, and will enhance the detection sensitivity resulting in reduced counting time. The detector is compatible with electric coolers without any sacrifice in performance and supports the Canberra Mathematical efficiency calibration method (In situ Object Calibration Software or ISOCS, and Laboratory Source-less Calibration Software or LABSOCS). In addition, the SAGe Well detector supports true coincidence summing available in the ISOCS/LABSOCS framework. The improved resolution performance greatly enhances detection sensitivity of this new detector for a range of sample sizes and geometries counted inside the well. This results in lower minimum detectable

  5. Characteristic Performance Evaluation of a new SAGe Well Detector for Small and Large Sample Geometries

    Energy Technology Data Exchange (ETDEWEB)

    Adekola, A.S.; Colaresi, J.; Douwen, J.; Jaederstroem, H.; Mueller, W.F.; Yocum, K.M.; Carmichael, K. [Canberra Industries Inc., 800 Research Parkway, Meriden, CT 06450 (United States)

    2015-07-01

    Environmental scientific research requires a detector that has sensitivity low enough to reveal the presence of any contaminant in the sample at a reasonable counting time. Canberra developed the germanium detector geometry called Small Anode Germanium (SAGe) Well detector, which is now available commercially. The SAGe Well detector is a new type of low capacitance germanium well detector manufactured using small anode technology capable of advancing many environmental scientific research applications. The performance of this detector has been evaluated for a range of sample sizes and geometries counted inside the well, and on the end cap of the detector. The detector has energy resolution performance similar to semi-planar detectors, and offers significant improvement over the existing coaxial and Well detectors. Energy resolution performance of 750 eV Full Width at Half Maximum (FWHM) at 122 keV γ-ray energy and resolution of 2.0 - 2.3 keV FWHM at 1332 keV γ-ray energy are guaranteed for detector volumes up to 425 cm{sup 3}. The SAGe Well detector offers an optional 28 mm well diameter with the same energy resolution as the standard 16 mm well. Such outstanding resolution performance will benefit environmental applications in revealing the detailed radionuclide content of samples, particularly at low energy, and will enhance the detection sensitivity resulting in reduced counting time. The detector is compatible with electric coolers without any sacrifice in performance and supports the Canberra Mathematical efficiency calibration method (In situ Object Calibration Software or ISOCS, and Laboratory Source-less Calibration Software or LABSOCS). In addition, the SAGe Well detector supports true coincidence summing available in the ISOCS/LABSOCS framework. The improved resolution performance greatly enhances detection sensitivity of this new detector for a range of sample sizes and geometries counted inside the well. This results in lower minimum detectable

  6. Sample preparation of environmental samples using benzene synthesis followed by high-performance LSC

    International Nuclear Information System (INIS)

    Filippis, S. De; Noakes, J.E.

    1991-01-01

    Liquid scintillation counting (LSC) techniques have been widely employed as the detection method for determining environmental levels of tritium and 14 C. Since anthropogenic and nonanthropogenic inputs to the environment are a concern, sampling the environment surrounding a nuclear power facility or fuel reprocessing operation requires the collection of many different sample types, including agriculture products, water, biota, aquatic life, soil, and vegetation. These sample types are not suitable for the direct detection of tritium of 14 C for liquid scintillation techniques. Each sample type must be initially prepared in order to obtain the carbon or hydrogen component of interest and present this in a chemical form that is compatible with common chemicals used in scintillation counting applications. Converting the sample of interest to chemically pure benzene as a sample preparation technique has been widely accepted for processing samples for radiocarbon age-dating applications. The synthesized benzene is composed of the carbon or hydrogen atoms from the original sample and is ideal as a solvent for LSC with excellent photo-optical properties. Benzene synthesis followed by low-background scintillation counting can be applied to the preparation and measurement of environmental samples yielding good detection sensitivities, high radionuclide counting efficiency, and shorter preparation time. The method of benzene synthesis provides a unique approach to the preparation of a wide variety of environmental sample types using similar chemistry for all samples

  7. The COMT Val158 allele is associated with impaired delayed-match-to-sample performance in ADHD

    Directory of Open Access Journals (Sweden)

    Matthews Natasha

    2012-05-01

    Full Text Available Abstract Background This study explored the association between three measures of working memory ability and genetic variation in a range of catecholamine genes in a sample of children with ADHD. Methods One hundred and eighteen children with ADHD performed three working memory measures taken from the CANTAB battery (Spatial Span, Delayed-match-to-sample, and Spatial Working Memory. Associations between performance on working memory measures and allelic variation in catecholamine genes (including those for the noradrenaline transporter [NET1], the dopamine D4 and D2 receptor genes [DRD4; DRD2], the gene encoding dopamine beta hydroxylase [DBH] and catechol-O-methyl transferase [COMT] were investigated using regression models that controlled for age, IQ, gender and medication status on the day of test. Results Significant associations were found between performance on the delayed-match-to-sample task and COMT genotype. More specifically, val/val homozygotes produced significantly more errors than did children who carried a least one met allele. There were no further associations between allelic variants and performance across the other working memory tasks. Conclusions The working memory measures employed in the present study differed in the degree to which accurate task performance depended upon either the dynamic updating and/or manipulation of items in working memory, as in the spatial span and spatial working memory tasks, or upon the stable maintenance of representations, as in the delay-match–to-sample task. The results are interpreted as evidence of a relationship between tonic dopamine levels associated with the met COMT allele and the maintenance of stable working memory representations required to perform the delayed-match-to-sample-task.

  8. The Performance Analysis Based on SAR Sample Covariance Matrix

    Directory of Open Access Journals (Sweden)

    Esra Erten

    2012-03-01

    Full Text Available Multi-channel systems appear in several fields of application in science. In the Synthetic Aperture Radar (SAR context, multi-channel systems may refer to different domains, as multi-polarization, multi-interferometric or multi-temporal data, or even a combination of them. Due to the inherent speckle phenomenon present in SAR images, the statistical description of the data is almost mandatory for its utilization. The complex images acquired over natural media present in general zero-mean circular Gaussian characteristics. In this case, second order statistics as the multi-channel covariance matrix fully describe the data. For practical situations however, the covariance matrix has to be estimated using a limited number of samples, and this sample covariance matrix follow the complex Wishart distribution. In this context, the eigendecomposition of the multi-channel covariance matrix has been shown in different areas of high relevance regarding the physical properties of the imaged scene. Specifically, the maximum eigenvalue of the covariance matrix has been frequently used in different applications as target or change detection, estimation of the dominant scattering mechanism in polarimetric data, moving target indication, etc. In this paper, the statistical behavior of the maximum eigenvalue derived from the eigendecomposition of the sample multi-channel covariance matrix in terms of multi-channel SAR images is simplified for SAR community. Validation is performed against simulated data and examples of estimation and detection problems using the analytical expressions are as well given.

  9. A recurrent neural network for classification of unevenly sampled variable stars

    Science.gov (United States)

    Naul, Brett; Bloom, Joshua S.; Pérez, Fernando; van der Walt, Stéfan

    2018-02-01

    Astronomical surveys of celestial sources produce streams of noisy time series measuring flux versus time (`light curves'). Unlike in many other physical domains, however, large (and source-specific) temporal gaps in data arise naturally due to intranight cadence choices as well as diurnal and seasonal constraints1-5. With nightly observations of millions of variable stars and transients from upcoming surveys4,6, efficient and accurate discovery and classification techniques on noisy, irregularly sampled data must be employed with minimal human-in-the-loop involvement. Machine learning for inference tasks on such data traditionally requires the laborious hand-coding of domain-specific numerical summaries of raw data (`features')7. Here, we present a novel unsupervised autoencoding recurrent neural network8 that makes explicit use of sampling times and known heteroskedastic noise properties. When trained on optical variable star catalogues, this network produces supervised classification models that rival other best-in-class approaches. We find that autoencoded features learned in one time-domain survey perform nearly as well when applied to another survey. These networks can continue to learn from new unlabelled observations and may be used in other unsupervised tasks, such as forecasting and anomaly detection.

  10. The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

    International Nuclear Information System (INIS)

    Böhringer, Hans; Chon, Gayoung; Trümper, Joachim; Retzlaff, Jörg; Meisenheimer, Klaus; Schartel, Norbert

    2017-01-01

    As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10 −12 erg s −1 cm −2 (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ 8 and Ω m , yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

  11. The Extended Northern ROSAT Galaxy Cluster Survey (NORAS II). I. Survey Construction and First Results

    Energy Technology Data Exchange (ETDEWEB)

    Böhringer, Hans; Chon, Gayoung; Trümper, Joachim [Max-Planck-Institut für Extraterrestrische Physik, D-85748 Garching (Germany); Retzlaff, Jörg [ESO, D-85748 Garching (Germany); Meisenheimer, Klaus [Max-Planck-Institut für Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Schartel, Norbert [ESAC, Camino Bajo del Castillo, Villanueva de la Cañada, E-28692 Madrid (Spain)

    2017-05-01

    As the largest, clearly defined building blocks of our universe, galaxy clusters are interesting astrophysical laboratories and important probes for cosmology. X-ray surveys for galaxy clusters provide one of the best ways to characterize the population of galaxy clusters. We provide a description of the construction of the NORAS II galaxy cluster survey based on X-ray data from the northern part of the ROSAT All-Sky Survey. NORAS II extends the NORAS survey down to a flux limit of 1.8 × 10{sup −12} erg s{sup −1} cm{sup −2} (0.1–2.4 keV), increasing the sample size by about a factor of two. The NORAS II cluster survey now reaches the same quality and depth as its counterpart, the southern REFLEX II survey, allowing us to combine the two complementary surveys. The paper provides information on the determination of the cluster X-ray parameters, the identification process of the X-ray sources, the statistics of the survey, and the construction of the survey selection function, which we provide in numerical format. Currently NORAS II contains 860 clusters with a median redshift of z  = 0.102. We provide a number of statistical functions, including the log N –log S and the X-ray luminosity function and compare these to the results from the complementary REFLEX II survey. Using the NORAS II sample to constrain the cosmological parameters, σ {sub 8} and Ω{sub m}, yields results perfectly consistent with those of REFLEX II. Overall, the results show that the two hemisphere samples, NORAS II and REFLEX II, can be combined without problems into an all-sky sample, just excluding the zone of avoidance.

  12. Using the Malcolm Baldrige "are we making progress" survey for organizational self-assessment and performance improvement.

    Science.gov (United States)

    Shields, Judith A; Jennings, Jerry L

    2013-01-01

    A national healthcare company applied the Malcolm Baldrige Criteria for Performance Excellence and its "Are We Making Progress?" survey as an annual organizational self-assessment to identify areas for improvement. For 6 years, Liberty Healthcare Corporation reviewed the survey results on an annual basis to analyze positive and negative trends, monitor company progress toward targeted goals and develop new initiatives to address emerging areas for improvement. As such, the survey provided a simple and inexpensive methodology to gain useful information from employees at all levels and from multiple service sites and business sectors. In particular, it provided a valuable framework for assessing and improving the employees' commitment to the company's mission and values, high standards and ethics, quality of work, and customer satisfaction. The methodology also helped the company to incorporate the philosophy and principles of continuous quality improvement in a unified fashion. Corporate and local leadership used the same measure to evaluate the performance of individual programs relative to each other, to the company as a whole, and to the "best practices" standard of highly successful companies that received the Malcolm Baldrige National Quality Award. © 2012 National Association for Healthcare Quality.

  13. Radiological Survey Results for the Niagara Mohawk Right-of-Way, Tonawanda, New York (TNY004)

    International Nuclear Information System (INIS)

    McKenzie, S.P.; Uziel, M.S.

    1998-01-01

    At the request of the U.S. Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey of a small portion of the Niagara Mohawk Power Corporation right-of-way in Tonawanda, New York. The purpose of the survey was to determine if radioactive residuals had migrated from or been redistributed onto the Niagara Mohawk right-of-way from the former Linde property to the west. The Linde Air Products Division of Union Carbide Corporation, Tonawanda New York, had used radioactive materials at that location for work performed under government contract from 1942 through 1948. The survey was performed in May 1996 in response to Formerly Utilized Sites Remedial Action Program (FUSRAP) requirements. These requirements dictate that the radiological status of certain vicinity properties shall be assessed and documented according to prescribed procedures prior to certification of the property for release for unrestricted use. Such release can only be granted if the property is found to be within current applicable authorized limits. The survey included a gamma scan of accessible areas and the collection and radionuclide analysis of soil samples from the portion of right-of-way located east of the former Linde plant site and north of the railway spur entrance gate. Results of the survey indicate that radioactive material probably originating from the Linde plant is located on the Niagara Mohawk right-of-way in the area surveyed. Surface gamma exposure rates were elevated above typical background levels. Four scattered surface soil samples exceeded DOE guideline values for 238 U, and 8 of 13 surface soil samples exceeded DOE guideline values for 226 Ra. The radionuclide distribution in these samples was similar to that found in materials resulting from former processing activities at the Linde site. It is recommended that the property be designated for remedial action by DOE

  14. [The general survey for chondromalacia of 2,743 Chinese population].

    Science.gov (United States)

    Guo, K; Ye, Q; Zeng, X; Lin, J; Wu, Z

    1998-06-01

    To evaluate the distribution of chondromalacia patella in Chinese population. A random cluster sampling survey was performed covering 2,743 subjects varied in age, sex and occupation in 1995. The prevalence rate is 36.2%. The occurrence in women was higher than that in men (P chondromalacia patella in China.

  15. Geochemical reanalysis of historical U.S. Geological Survey sediment samples from the Kougarok area, Bendeleben and Teller quadrangles, Seward Peninsula, Alaska

    Science.gov (United States)

    Werdon, Melanie B.; Granitto, Matthew; Azain, Jaime S.

    2015-01-01

    The State of Alaska’s Strategic and Critical Minerals (SCM) Assessment project, a State-funded Capital Improvement Project (CIP), is designed to evaluate Alaska’s statewide potential for SCM resources. The SCM Assessment is being implemented by the Alaska Division of Geological & Geophysical Surveys (DGGS), and involves obtaining new airborne-geophysical, geological, and geochemical data. As part of the SCM Assessment, thousands of historical geochemical samples from DGGS, U.S. Geological Survey (USGS), and U.S. Bureau of Mines archives are being reanalyzed by DGGS using modern, quantitative, geochemical-analytical methods. The objective is to update the statewide geochemical database to more clearly identify areas in Alaska with SCM potential. The USGS is also undertaking SCM-related geologic studies in Alaska through the federally funded Alaska Critical Minerals cooperative project. DGGS and USGS share the goal of evaluating Alaska’s strategic and critical minerals potential and together created a Letter of Agreement (signed December 2012) and a supplementary Technical Assistance Agreement (#14CMTAA143458) to facilitate the two agencies’ cooperative work. Under these agreements, DGGS contracted the USGS in Denver to reanalyze historical USGS sediment samples from Alaska. For this report, DGGS funded reanalysis of 302 historical USGS sediment samples from the statewide Alaska Geochemical Database Version 2.0 (AGDB2; Granitto and others, 2013). Samples were chosen from the Kougarok River drainage as well as smaller adjacent drainages in the Bendeleben and Teller quadrangles, Seward Peninsula, Alaska (fig. 1). The USGS was responsible for sample retrieval from the National Geochemical Sample Archive (NGSA) in Denver, Colorado through the final quality assurance/quality control (QA/QC) of the geochemical analyses obtained through the USGS contract lab. The new geochemical data are published in this report as a coauthored DGGS report, and will be incorporated

  16. Evaluation of surface sampling method performance for Bacillus Spores on clean and dirty outdoor surfaces.

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Mollye C.; Einfeld, Wayne; Boucher, Raymond M.; Brown, Gary Stephen; Tezak, Matthew Stephen

    2011-06-01

    Recovery of Bacillus atrophaeous spores from grime-treated and clean surfaces was measured in a controlled chamber study to assess sampling method performance. Outdoor surfaces investigated by wipe and vacuum sampling methods included stainless steel, glass, marble and concrete. Bacillus atrophaeous spores were used as a surrogate for Bacillus anthracis spores in this study designed to assess whether grime-coated surfaces significantly affected surface sampling method performance when compared to clean surfaces. A series of chamber tests were carried out in which known amounts of spores were allowed to gravitationally settle onto both clean and dirty surfaces. Reference coupons were co-located with test coupons in all chamber experiments to provide a quantitative measure of initial surface concentrations of spores on all surfaces, thereby allowing sampling recovery calculations. Results from these tests, carried out under both low and high humidity conditions, show that spore recovery from grime-coated surfaces is the same as or better than spore recovery from clean surfaces. Statistically significant differences between method performance for grime-coated and clean surfaces were observed in only about half of the chamber tests conducted.

  17. Environmental survey preliminary report, Mound Plant, Miamisburg, Ohio

    Energy Technology Data Exchange (ETDEWEB)

    1987-03-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Mound Plant, conducted August 18 through 29, 1986. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the Mound Plant. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the Mound Plant, and interviews with site personnel. The Survey found no environmental problems at the Mound Plant that represent an immediate threat to human life. The environmental problems identified at the Mound Plant by the Survey confirm that the site is confronted with a number of environmental problems which are by and large a legacy from past practices at a time when environmental problems were less well understood. Theses problems vary in terms of their magnitude and risk, as described in this report. Although the sampling and analysis performed by the Mound Plant Survey will assist in further identifying environmental problems at the site, a complete understanding of the significance of some of the environmental problems identified requires a level of study and characterization that is beyond the scope of the Survey. Actions currently under way or planned at the site, particularly the Phase II activities of the Comprehensive Environmental Analysis and Response Program (CEARP) as developed and implemented by the Albuquerque Operations Office, will contribute toward meeting this requirement. 85 refs., 24 figs., 20 tabs.

  18. Single point aerosol sampling: Evaluation of mixing and probe performance in a nuclear stack

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, J.C.; Fairchild, C.I.; Wood, G.O. [Los Alamos National Laboratory, NM (United States)] [and others

    1995-02-01

    Alternative Reference Methodologies (ARMs) have been developed for sampling of radionuclides from stacks and ducts that differ from the methods required by the U.S. EPA. The EPA methods are prescriptive in selection of sampling locations and in design of sampling probes whereas the alternative methods are performance driven. Tests were conducted in a stack at Los Alamos National Laboratory to demonstrate the efficacy of the ARMs. Coefficients of variation of the velocity tracer gas, and aerosol particle profiles were determined at three sampling locations. Results showed numerical criteria placed upon the coefficients of variation by the ARMs were met at sampling stations located 9 and 14 stack diameters from flow entrance, but not at a location that is 1.5 diameters downstream from the inlet. Experiments were conducted to characterize the transmission of 10 {mu}m aerodynamic equivalent diameter liquid aerosol particles through three types of sampling probes. The transmission ratio (ratio of aerosol concentration at the probe exit plane to the concentration in the free stream) was 107% for a 113 L/min (4-cfm) anisokinetic shrouded probe, but only 20% for an isokinetic probe that follows the EPA requirements. A specially designed isokinetic probe showed a transmission ratio of 63%. The shrouded probe performance would conform to the ARM criteria; however, the isokinetic probes would not.

  19. Mapping performance of the fishery industries innovation: A survey in the North Coast of Java

    Science.gov (United States)

    Yusuf, M.; Legowo, A. M.; Albaarri, A. N.; Darmanto, Y. S.; Agustini, T. W.; Setyastuti, A. I.

    2018-01-01

    This study aimed to put the performance indicators of industry innovation fisheries which would be used as inputs to create innovation strategies in order to win the market competition, especially in USA. Survey and in-depth interviews were conducted on 10 industries with shrimp, tuna and crab commodities representing the fishery industry in Indonesia to USA export destination. The result of mapping performance of innovation indicators of Indonesian Fishery Industry resulted the 10’s strategies alternative to win the market. Based on survey result indicate that “the regulation of catch and/or harvest of cultivation factor” is considered the weakest factor in develop innovation with a score of 3.3, while the international trade factor are considered as the strongest factor in developing innovation development with scores 5,0. Aggressive strategy by strengthening the strength owned by the internal industry was by always looking at the opportunity, so that they could take the opportunity to win the market competition at the right time.

  20. Infrared survey of 50 buildings constructed during 100 years: thermal performances and damage conditions

    Science.gov (United States)

    Ljungberg, Sven-Ake

    1995-03-01

    Different building constructions and craftsmanship give rise to different thermal performance and damage conditions. The building stock of most industrial countries consists of buildings of various age, and constructions, from old historic buildings with heavy stone or wooden construction, to new buildings with heavy or light concrete construction, or modern steel or wooden construction. In this paper the result from a detailed infrared survey of 50 buildings from six Swedish military camps is presented. The presentation is limited to a comparison of thermal performance and damage conditions of buildings of various ages, functions, and constructions, of a building period of more than 100 years. The result is expected to be relevant even to civilian buildings. Infrared surveys were performed during 1992-1993, with airborne, and mobile short- and longwave infrared systems, out- and indoor thermography. Interpretation and analysis of infrared data was performed with interactive image and analyzing systems. Field inspections were carried out with fiber optics system, and by ocular inspections. Air-exchange rate was measured in order to quantify air leakages through the building envelope, indicated in thermograms. The objects studied were single-family houses, barracks, office-, service-, school- and exercise buildings, military hotels and restaurants, aircraft hangars, and ship factory buildings. The main conclusions from this study are that most buildings from 1880 - 1940 have a solid construction with a high quality of craftsmanship, relatively good thermal performance, due to extremely thick walls, and adding insulation at the attic floor. From about 1940 - 1960 the quality of construction, thermal performance and craftsmanship seem to vary a lot. Buildings constructed during the period of 1960 - 1990 have in general the best thermal performance due to a better insulation capacity, however, also one finds here the greatest variety of problems. The result from this

  1. The integration of intrapreneurship into a performance management model

    Directory of Open Access Journals (Sweden)

    Thabo WL Foba

    2007-02-01

    Full Text Available This study aimed to investigate the feasibility of using the dynamics of intrapreneurship to develop a new generation performance management model based on the structural dynamics of the Balanced Score Card approach. The literature survey covered entrepreneurship, from which the construct, intrapreneurship, was synthesized. Reconstructive logic and Hermeneutic methodology were used in studying the performance management systems and the Balanced Score Card approach. The dynamics were then integrated into a new approach for the management of performance of intrapreneurial employees in the corporate environment. An unstructured opinion survey followed: a sample of intrapreneurship students evaluated and validated the model’s conceptual feasibility and probable practical value.

  2. Influence Of Competence Cultural Organization And Job Satisfaction Of Career Development And Implications On The Performance Of EmployeesSurvey On State-Owned Enterprises Soes In The Region Of Cirebon

    Directory of Open Access Journals (Sweden)

    Zuki Kurniawan

    2017-12-01

    Full Text Available The purpose of this study is describing and analyzing the influence of competence organizational culture and career development for job satisfaction and its implications on the performance of employees. The purpose of this study is determining the effect of competence organizational culture and career development for satisfaction and its implications for employee performance improvement of SOEs in the region of Cirebon either partially or simultaneously. The method used is descriptive verification with the type of survey sampling using simple random sampling technique. The object of the study is conducting on employees of State Owned Enterprises SOEs Cirebon region with the sample of 240 respondents from the population of 605. The data analysis is descriptive analysis and verification using the Structural Equation Model SEM with the program Linear Structural Relationship LISREL 8.80. The results showed that partial and simultaneous job satisfaction career development competency and organizational culture affect the performance. Competencies organizational culture career development and job satisfaction simultaneously positive and significant effect on employee performance. However the partial organizational culture is not significant to affect the performance of employee. The greatest good for job satisfaction on employee performance and career development is variable. Managerial implications based on the analysis of research need to improve performance through job satisfaction in any aspect expectations are met while the priority in improving job satisfaction and employee performance should give priority to the aspects of career development assessment further premises employee competence skills and later human aspects of organizational culture with aspect results orientation.

  3. Effect of sampling and diagnostic effort on the assessment of schistosomiasis and soil-transmitted helminthiasis and drug efficacy: a meta-analysis of six drug efficacy trials and one epidemiological survey.

    Science.gov (United States)

    Levecke, Bruno; Brooker, Simon J; Knopp, Stefanie; Steinmann, Peter; Sousa-Figueiredo, Jose Carlos; Stothard, J Russell; Utzinger, Jürg; Vercruysse, Jozef

    2014-12-01

    It is generally recommended to perform multiple stool examinations in order to improve the diagnostic accuracy when assessing the impact of mass drug administration programmes to control human intestinal worm infections and determining efficacy of the drugs administered. However, the collection and diagnostic work-up of multiple stool samples increases costs and workload. It has been hypothesized that these increased efforts provide more accurate results when infection and drug efficacy are summarized by prevalence (proportion of subjects infected) and cure rate (CR, proportion of infected subjects that become egg-negative after drug administration), respectively, but not when these indicators are expressed in terms of infection intensity and egg reduction rate (ERR). We performed a meta-analysis of six drug efficacy trials and one epidemiological survey. We compared prevalence and intensity of infection, CR and ERR based on collection of one or two stool samples that were processed with single or duplicate Kato-Katz thick smears. We found that the accuracy of prevalence estimates and CR was lowest with the minimal sampling effort, but that this was not the case for estimating infection intensity and ERR. Hence, a single Kato-Katz thick smear is sufficient for reporting infection intensity and ERR following drug treatment.

  4. Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico

    International Nuclear Information System (INIS)

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs

  5. Environmental Survey preliminary report, Los Alamos National Laboratory, Los Alamos, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Los Alamos National Laboratory (LANL), conducted March 29, 1987 through April 17, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at the LANL, and interviews with site personnel. The Survey team developed Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by the Idaho National Engineering Laboratory. When completed, the results will be incorporated into the LANL Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey for the LANL. 65 refs., 68 figs., 73 tabs.

  6. Environmental Survey preliminary report, Laboratory for Energy-Related Health Research, Davis, California

    International Nuclear Information System (INIS)

    1988-03-01

    This report presents the preliminary findings from the first phase of the Survey of the United States Department of Energy (DOE) Laboratory for Energy-Related Health Research (LEHR) at the University of California, Davis (UC Davis), conducted November 16 through 20, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LEHR. The Survey covers all environmental media and all areas of environmental regulation, and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the LEHR and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the LEHR at UC Davis. The Interim Report will reflect the final determinations of the LEHR Survey. 75 refs., 26 figs., 23 tabs

  7. British Association for the Study of Community Dentistry (BASCD) guidance on sampling for surveys of child dental health. A BASCD coordinated dental epidemiology programme quality standard.

    Science.gov (United States)

    Pine, C M; Pitts, N B; Nugent, Z J

    1997-03-01

    The British Association for the Study of Community Dentistry (BASCD) is responsible for the coordination of locally based surveys of child dental health which permit local and national comparisons between health authorities and regions. These surveys began in 1985/86 in England and Wales, 1987/88 in Scotland and 1993/94 in Northern Ireland. BASCD has taken an increasing lead in setting quality standards in discussion with the NHS Epidemiology Coordinators of the Dental Epidemiology Programme. This paper comprises guidance on the sampling for these surveys.

  8. The Influence of Motivation on Employees' Performance: A Study of ...

    African Journals Online (AJOL)

    user

    motivation on employees' performance of selected manufacturing firms in Anambra State ..... Research Design: The survey research design method was used in this study. ... manager, the accountant, and the production manager). The sample.

  9. Environmental Survey preliminary report, Strategic Petroleum Reserve, Texas and Louisiana Gulf Coast

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This report presents the preliminary environmental findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Strategic Petroleum Reserve (SPR), located in Louisiana and Texas, and conducted in two segments from November 30 through December 11, 1987, and February 1 through 10, 1988. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SPR. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involved the review of existing site environmental data, observations of the operations carried on at SPR, and interviews with site personnel. The Survey team has developed a Sampling and Analysis Plan to assist in further assessing specific environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by Idaho National Engineering Laboratory. When completed, the results will be incorporated into the SPR Survey findings for inclusion into the Environmental Survey Summary Report. The Summary Report will reflect the final determinations of the SPR Survey and the other DOE site-specific Surveys. 200 refs., 50 figs., 30 tabs.

  10. Environmental Survey preliminary report, Morgantown Energy Technology Center, Morgantown, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Morgantown Energy Technology Center (METC) conducted November 30 through December 4, 1987. In addition, the preliminary findings of the Laramie Project Office (LPO) Survey, which was conducted as part of the METC Survey on January 25 through 29, 1988, are presented in Appendices E and F. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with METC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at METC, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities at METC. The Sampling and Analysis Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the results will be incorporated into the METC Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the Survey METC. 60 refs., 28 figs., 43 tabs.

  11. Aerial radiological survey of the Feed Materials Production Center and surrounding area, Fernald, Ohio. Date of survey: April 1985

    International Nuclear Information System (INIS)

    1985-10-01

    An aerial radiological survey was performed over the area surrounding the Feed Materials Production Center, located near Fernald, Ohio, during the period April 24 to 27, 1985. The survey covered a 70-square-kilometer (27-square-mile) area centered on the plant. The highest exposure rates, in excess of 0.35 milliroentgens per hour (mR/h), were inferred from the data measured directly over the plant. This radiation was due to the presence of nuclides which were consistent with normal plant operations. For the remainder of the survey area, the inferred radiation exposure rates, varying from 6 to 12 microroentgens per hour (μR/h), were due to naturally-occurring potassium, uranium, thorium, and daughter products. The reported exposure rate values include an estimated cosmic ray contribution of 3.7μR/h. Ground-based measurements, conducted during the time of the aerial survey, were compared to the aerial results. Pressurized ionization chamber readings and a group of soil samples were acquired at several locations within the survey area. The exposure rate values obtained from these measurements were in agreement with the inferred aerial results. Soil sample results showed several areas just outside the site boundary with slightly elevated amounts of U-238. The levels, however, were well below the detection limit of the aerial system. The only off-site area that showed apparent above background activity in the aerial data was directly west of the storage silos. The symmetric shape of the contours, however, suggests that these elevated levels are due to ''shine'' from material stored on-site in the silos and not to actual off-site contamination. Detailed comparison of the 1985 aerial survey data with a previous survey conducted in 1976 showed no significant change in any area outside the plant boundary. 6 refs., 9 figs., 3 tabs

  12. The first DC performance test and analysis of CC conductor short sample at ASIPP conductor test facility

    International Nuclear Information System (INIS)

    Shi Yi; Wu Yu; Liu Huajun; Long Feng; Qian Li; Ren Zhibin; Li Shaolei; Liu Bo; Chen Jinglin

    2012-01-01

    Highlights: ► In this study the first DC performance experiments of ITER correction coil conductor short sample have been carried out in ASIPP test facility. ► A CC conductor short sample was fabricated and tested to confirm the capability of this test facility for qualification tests of CC conductors. ► There is no obvious impact of cycling on DC performance measurement. ► Those measured results of current sharing temperature are in agreement with the expected results from strand scaling - Abstract: The first DC performance experiments of ITER correction coil (CC) conductor short sample have been carried out in the conductor test facility of Institute of Plasma Physics, CAS (ASIPP) in January this year. Those experiments aim to investigate the DC performance of ITER CC conductor. The tested conductor short sample is bended as a half circle with the diameter of 270 mm to meet the background magnetic field shape. The half circle part of sample is longer than the final twist pitch. The current sharing temperature (T cs ) in the 3.86 T external magnetic field (B ex ), ≤12 kA could be measured including the critical current (I c ) run. There is no obvious impact of 1000 cycles on DC performance. Those measured T cs results are in agreement with the expected results from strand scaling.

  13. A survey of clinical performance skills requirements in medical radiation technology

    International Nuclear Information System (INIS)

    Rowntree, P.A.; Veitch, J.D.

    1993-01-01

    This paper outlines the reasons behind carry out a study of clinical performance skills requirements and the method being used to gather data. It describes the changes which have occurred in radiographer education in Queensland, the broader impact brought about by changes in professional body requirements and the development of a Competency based Standards Document for the profession. The paper provides examples of the survey design and layout being developed for distribution to third year students in the Medical Imaging Technology major of the Bachelor of Applied Science (Medical Radiation Technology) Queensland University of Technology, graduates and clinical departments in Queensland. 1 tab., 1 fig

  14. Oblique Chest Views as a Routine Part of Skeletal Surveys Performed for Possible Physical Abuse--Is This Practice Worthwhile?

    Science.gov (United States)

    Hansen, Karen Kirhofer; Prince, Jeffrey S.; Nixon, G. William

    2008-01-01

    Objective: To evaluate the utility of oblique chest views in the diagnosis of rib fractures when used as a routine part of the skeletal survey performed for possible physical abuse. Methods: Oblique chest views have been part of the routine skeletal survey protocol at Primary Children's Medical Center since October 2002. Dictated radiology reports…

  15. Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

    Directory of Open Access Journals (Sweden)

    Simms Victoria

    2007-03-01

    Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

  16. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  17. Performance of the Brazilian laboratories on radionuclide analysis in environmental samples

    International Nuclear Information System (INIS)

    Vianna, Maria Elizabeth; Tauhata, Luiz; Oliveira, Josue P.; Oliveira, Antonio E.; Clain, Almir F.; Garcia, Luiz Carlos; Conceicao, Cirilo C. da

    1995-01-01

    The performance of fifteen Brazilian environmental radioanalytical laboratories was evaluated after their participation in nine intercomparison runs of the National Intercomparison Program, PNI, offered by the Instituto de Radioprotecao e Dosimetria, CNEN. A total of 549 radionuclide determinations in environmental samples were evaluated. The results classified as Good ranged from 56.4% for Alpha and Beta Gross determinations up to 84.9% for Gamma spectrometry determinations. These results shows that the best performance in radionuclide determination is reached in gamma spectrometry analyses and the worst in Alpha and Beta Gross determinations. This general behavior is similar to the one reached by other laboratories in international intercomparison programs. (author). 1 ref., 1 fig., 1 tab

  18. Amostras complexas em inquéritos populacionais: planejamento e implicações na análise estatística dos dados Complex Sampling Design in Population Surveys: Planning and effects on statistical data analysis

    Directory of Open Access Journals (Sweden)

    Célia Landmann Szwarcwald

    2008-05-01

    Full Text Available A avaliação do desempenho dos sistemas de saúde das nações vem ganhando importância crescente entre os gestores do setor saúde. Entre os instrumentais de avaliação do desempenho de saúde, destacam-se os inquéritos nacionais de saúde, cada vez mais utilizados para avaliar o estado de saúde da população e a assistência de saúde prestada do ponto de vista do usuário. A maioria dos inquéritos nacionais de saúde não usa amostragem aleatória simples, em parte por restrições orçamentárias, em parte por limites de tempo associado à coleta de dados. Em geral, utiliza-se combinação de vários métodos probabilísticos de amostragem para seleção de uma amostra representativa da população, chamada de desenho complexo de amostragem. Entre os métodos de amostragem mais utilizados conjuntamente, destacam-se a amostra aleatória simples, a amostragem estratificada, e a amostragem por conglomerados. Resultante desse processo, a preocupação subseqüente é a análise de dados provenientes de amostras complexas. Este artigo trata de questões relacionadas à análise estatística de dados obtidos através de pesquisas com desenhos complexos de amostragem. Apresentam-se os problemas que ocorrem quando a análise estatística não incorpora a estrutura do plano amostral. Ao ignorar o desenho de amostragem, a análise estatística tradicional, sob a suposição de amostragem aleatória simples, pode produzir incorreções tanto para as estimativas médias como para as respectivas variâncias, comprometendo os resultados, os testes de hipóteses e as conclusões da pesquisa. Para a exemplificação dos métodos, é utilizada a Pesquisa Mundial de Saúde (PMS, realizada no Brasil em 2003.The evaluation of the health systems of nations has been gaining increasing importance among health managers. Among the evaluation tools for the performance of health systems, nationwide health surveys have been more and more used to evaluate the

  19. Snowball sampling by mail: application to a survey of smokers in the general population.

    Science.gov (United States)

    Etter, J F; Perneger, T V

    2000-02-01

    In a series of surveys intended for current and former smokers but sent to a random sample of the general population, we asked never smokers and smokers who did not wish to participate to transmit the questionnaire to any ever smoker they knew. We compared participants who received the questionnaire directly from us (original participants) to participants who received it from an addressee (secondary participants). Questionnaires on smoking were mailed to 3300 residents of Geneva (Switzerland) in 1997, and returned by 1167 people (35%). The final sample consisted of similar numbers of original participants (n = 578, primary response rate = 18% of total sample, or about 46% of ever smokers) and secondary participants (n = 566). Original participants were 1.7 years older than secondary participants (P = 0.03) and were more likely to be men (50% versus 43%, P = 0.009). Proportions of current smokers, stages of change, confidence in ability to quit smoking, cigarettes per day and attempts to quit smoking were similar in the two groups. Secondary participants had lower self-efficacy scores (-0.30 standard deviation (SD) units, P < 0.03), and they derived more pleasure from smoking (+0.25 SD units, P = 0.04). Among ex-smokers, direct participants were less active than secondary participants in coping with the temptation to smoke (-0.58 SD units, P = 0.002). Associations between smoking-related variables were similar in original and secondary participants. Allowing non-eligible addressees to transmit the questionnaire to someone else doubled the response rate, produced moderate bias on some variables only and had no detectable impact on associations between smoking-related variables.

  20. Can roads be used as transects for primate population surveys?.

    Science.gov (United States)

    Hilário, Renato R; Rodrigues, Flávio H G; Chiarello, Adriano G; Mourthé, Italo

    2012-01-01

    Line transect distance sampling (LTDS) can be applied to either trails or roads. However, it is likely that sampling along roads might result in biased density estimates. In this paper, we compared the results obtained with LTDS applied on trails and roads for two primate species (Callithrix penicillata and Callicebus nigrifrons) to clarify whether roads are appropriate transects to estimate densities. We performed standard LTDS surveys in two nature reserves in south-eastern Brazil. Effective strip width and population density were different between trails and roads for C. penicillata, but not for C. nigrifrons. The results suggest that roads are not appropriate for use as transects in primate surveys, at least for some species. Further work is required to fully understand this issue, but in the meantime we recommend that researchers avoid using roads as transects or treat roads and trails as covariates when sampling on roads is unavoidable. Copyright © 2012 S. Karger AG, Basel.

  1. Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan.

    Science.gov (United States)

    Pong, Suet-Ling; Johnston, Jamie; Chen, Vivien

    2010-01-01

    Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting-school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US.

  2. Performance of the Lot Quality Assurance Sampling Method Compared to Surveillance for Identifying Inadequately-performing Areas in Matlab, Bangladesh

    OpenAIRE

    Bhuiya, Abbas; Hanifi, S.M.A.; Roy, Nikhil; Streatfield, P. Kim

    2007-01-01

    This paper compared the performance of the lot quality assurance sampling (LQAS) method in identifying inadequately-performing health work-areas with that of using health and demographic surveillance system (HDSS) data and examined the feasibility of applying the method by field-level programme supervisors. The study was carried out in Matlab, the field site of ICDDR,B, where a HDSS has been in place for over 30 years. The LQAS method was applied in 57 work-areas of community health workers i...

  3. Planning schistosomiasis control: investigation of alternative sampling strategies for Schistosoma mansoni to target mass drug administration of praziquantel in East Africa.

    Science.gov (United States)

    Sturrock, Hugh J W; Gething, Pete W; Ashton, Ruth A; Kolaczinski, Jan H; Kabatereine, Narcis B; Brooker, Simon

    2011-09-01

    In schistosomiasis control, there is a need to geographically target treatment to populations at high risk of morbidity. This paper evaluates alternative sampling strategies for surveys of Schistosoma mansoni to target mass drug administration in Kenya and Ethiopia. Two main designs are considered: lot quality assurance sampling (LQAS) of children from all schools; and a geostatistical design that samples a subset of schools and uses semi-variogram analysis and spatial interpolation to predict prevalence in the remaining unsurveyed schools. Computerized simulations are used to investigate the performance of sampling strategies in correctly classifying schools according to treatment needs and their cost-effectiveness in identifying high prevalence schools. LQAS performs better than geostatistical sampling in correctly classifying schools, but at a cost with a higher cost per high prevalence school correctly classified. It is suggested that the optimal surveying strategy for S. mansoni needs to take into account the goals of the control programme and the financial and drug resources available.

  4. A two-phase sampling design for increasing detections of rare species in occupancy surveys

    Science.gov (United States)

    Pacifici, Krishna; Dorazio, Robert M.; Dorazio, Michael J.

    2012-01-01

    1. Occupancy estimation is a commonly used tool in ecological studies owing to the ease at which data can be collected and the large spatial extent that can be covered. One major obstacle to using an occupancy-based approach is the complications associated with designing and implementing an efficient survey. These logistical challenges become magnified when working with rare species when effort can be wasted in areas with none or very few individuals. 2. Here, we develop a two-phase sampling approach that mitigates these problems by using a design that places more effort in areas with higher predicted probability of occurrence. We compare our new sampling design to traditional single-season occupancy estimation under a range of conditions and population characteristics. We develop an intuitive measure of predictive error to compare the two approaches and use simulations to assess the relative accuracy of each approach. 3. Our two-phase approach exhibited lower predictive error rates compared to the traditional single-season approach in highly spatially correlated environments. The difference was greatest when detection probability was high (0·75) regardless of the habitat or sample size. When the true occupancy rate was below 0·4 (0·05-0·4), we found that allocating 25% of the sample to the first phase resulted in the lowest error rates. 4. In the majority of scenarios, the two-phase approach showed lower error rates compared to the traditional single-season approach suggesting our new approach is fairly robust to a broad range of conditions and design factors and merits use under a wide variety of settings. 5. Synthesis and applications. Conservation and management of rare species are a challenging task facing natural resource managers. It is critical for studies involving rare species to efficiently allocate effort and resources as they are usually of a finite nature. We believe our approach provides a framework for optimal allocation of effort while

  5. A new unbiased stochastic derivative estimator for discontinuous sample performances with structural parameters

    NARCIS (Netherlands)

    Peng, Yijie; Fu, Michael C.; Hu, Jian Qiang; Heidergott, Bernd

    In this paper, we propose a new unbiased stochastic derivative estimator in a framework that can handle discontinuous sample performances with structural parameters. This work extends the three most popular unbiased stochastic derivative estimators: (1) infinitesimal perturbation analysis (IPA), (2)

  6. Business Studies Academic Performance Differences of Secondary School Juniors in Akwa Ibom State of Nigeria

    Science.gov (United States)

    Udoukpong, Bassey E.; Emah, Ime E.; Umoren, Shirley E.

    2012-01-01

    The research examined the differences in the academic performance in Business Studies of a sampled secondary school junior students in Akwa Ibom State of Nigeria. A sample of 290 (138 male and 152 female) Junior Secondary Three (9th grade) students was surveyed. The students' variables' being examined vis-à-vis academic performance in Business…

  7. Investigation of radioactivities on the wood samples taken from a fishing boat, the 5th Sumiyoshimaru

    International Nuclear Information System (INIS)

    Shizuma, Kiyoshi; Iwatani, Kazuo; Hasai, Hiromi

    1991-01-01

    Radioactivity survey has been performed on samples taken from a fishing boat, the 5th Sumiyoshimaru. This boat has been presumed to be exposed to the fallout of Bikini hydrogen bomb test. Gamma-ray measurements have been carried out for six wood samples and two soil samples. Since the 137 Cs concentration estimated for all samples were comparable to the fallout of the nuclear test, it was hard to judge whether the boat was definitely exposed to the Bikini fallout. (author)

  8. Investigation of radioactivities on the wood samples taken from a fishing boat, the 5th Sumiyoshimaru

    Energy Technology Data Exchange (ETDEWEB)

    Shizuma, Kiyoshi; Iwatani, Kazuo; Hasai, Hiromi (Hiroshima Univ., Higashi-Hiroshima (Japan). Faculty of Engineering)

    1991-03-01

    Radioactivity survey has been performed on samples taken from a fishing boat, the 5th Sumiyoshimaru. This boat has been presumed to be exposed to the fallout of Bikini hydrogen bomb test. Gamma-ray measurements have been carried out for six wood samples and two soil samples. Since the {sup 137}Cs concentration estimated for all samples were comparable to the fallout of the nuclear test, it was hard to judge whether the boat was definitely exposed to the Bikini fallout. (author).

  9. Environmental Survey preliminary report, Oak Ridge National Laboratory (X-10), Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Oak Ridge National Laboratory (ORNL), X-10 site, conducted August 17 through September 4, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ORNL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ORNL, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for ORNL. The Interim Report will reflect the final determinations of the ORNL Survey. 120 refs., 68 figs., 71 tabs.

  10. Finite sample performance of the E-M algorithm for ranks data modelling

    Directory of Open Access Journals (Sweden)

    Angela D'Elia

    2007-10-01

    Full Text Available We check the finite sample performance of the maximum likelihood estimators of the parameters of a mixture distribution recently introduced for modelling ranks/preference data. The estimates are derived by the E-M algorithm and the performance is evaluated both from an univariate and bivariate points of view. While the results are generally acceptable as far as it concerns the bias, the Monte Carlo experiment shows a different behaviour of the estimators efficiency for the two parameters of the mixture, mainly depending upon their location in the admissible parametric space. Some operative suggestions conclude the paer.

  11. Final Report For Independent Confirmatory Survey Summary And Results For The Hematite Decommissioning Project, Festus, Missouri

    International Nuclear Information System (INIS)

    Bailey, Erika N.; Lee, Jason D.

    2012-01-01

    ORAU conducted confirmatory surveys of the Hematite site during the period of June 12 through June 13, 2012. The survey activities included in-process inspections, document review, walkover surveys, sampling activities, and laboratory analysis of split samples. WEC was forthcoming with information relating to practices, procedures, and surface scan results. Scans performed by the WEC technician were extremely thorough and methodical. The WEC and ORAU technicians identified the same areas of elevated activity with comparable detector responses. WEC sampling of re-use soils, waste soils, sediments, and groundwater were conducted under ORAU observation. The sampling efforts observed by ORAU were performed in accordance with site-specific procedures and in a manner sufficient to provide quality supporting data. Three observations were made during groundwater sampling activities. First, the water level indicator was re-used without submitting rinse blank. Second, bubbles created during tubing extraction could indicate the presence of volatilized organic compounds. Third, samplers did not use a photo ionization detector prior to sample collection to indicate the presence of volatile organic vapors. Results of split samples indicated a high level of comparability between the WEC and ORAU/ORISE radiological laboratories. Analytical practices and procedures appear to be sufficient in providing quality radiochemical data. All concentrations from the Soil Re-Use Area and sediment samples are below Uniform radionuclide-specific derived concentration guideline level (DCGL W ) limits; thus, comparisons to the less conservative stratified geometry were not required. Results were compared to individual DCGLs and using the sum of fractions approach. Both composite soil samples collected from the Waste Handling Area (Bins 1 and 4) were well below the prescribed USEI waste acceptance criteria

  12. Results of the radiological survey at the former Alba Craft Laboratory site properties, Oxford, Ohio (OXO001)

    International Nuclear Information System (INIS)

    Murray, M.E.; Brown, K.S.; Mathis, R.A.

    1993-03-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the former Alba Craft Laboratory Site Properties, Oxford, Ohio. The survey was performed in July and September of 1992. The purpose of the survey was to determine whether the property was contaminated with radioactive residues, primarily 238 U, from uranium machining operations conducted for National Lead of Ohio, a prime Atomic Energy Commission contractor. The survey included scan measurement of direct radiation levels inside and outside the former laboratory, outdoors on eight properties adjoining the former laboratory, and the city right-of-way adjacent to the surveyed properties. Radionuclide concentrations were determined in outdoor surface and subsurface soil samples taken from each property and the exterior of the laboratory. Fixed surface residual radioactivity was measured inside the laboratory and outside the building. Air samples were collected, direct exposure was measured, and samples were collected to measure transferable radioactivity inside the building. Results of the survey indicate areas where surface and soil contamination level s are above the DOE guidelines for uncontrolled areas

  13. Survey of EEC solid waste arisings and performance of non-destructive assay systems

    International Nuclear Information System (INIS)

    Bremner, W.B.; Adaway, D.W.; Yates, A.

    1992-01-01

    This report covers the work carried out during an one-year contract which surveyed the radioactive solid waste arisings in EEC Member States and also tabulated information on the performance of the non-destructive assay (NDA) system used. The work was jointly carried out with CEA partners at Cadarache and Paris. The tabulated data give information on types, packaging, associated activity, and NDA capability of the utilities or research organisations. Some short comings in NDA capabilities are identified and possible solutions are given

  14. Strategic cost management, contingent factors and performance in services

    Directory of Open Access Journals (Sweden)

    Odysseas Pavlatos

    2018-06-01

    Full Text Available The purpose of this paper is to investigate the relationship between contextual factors identified from contingency-based research, the extent of the use of strategic cost management (SCM techniques and business performance in services. An empirical survey was conducted on a sample of 88 services in Greece. The analysis of the survey data indicates that the use of strategic cost management techniques in services can be considered quite satisfactory. By drawing on the grounds of contingency theory, five factors were identified as potentially exhibiting an emergent relationship with strategic cost management. The five factors are; (1 Perceived environmental uncertainty, (2 Structure, (3 Organizational life cycle stage, (4 Strategy and (5 Size. The survey revealed that SCM usage is positively affected by these five contingent factors, while SCM usage, in turn, positively affects performance. A significant mediating effect of SCM usage on performance is evident.

  15. Lot quality assurance sampling for screening communities hyperendemic for Schistosoma mansoni.

    Science.gov (United States)

    Rabarijaona, L P; Boisier, P; Ravaoalimalala, V E; Jeanne, I; Roux, J F; Jutand, M A; Salamon, R

    2003-04-01

    Lot quality assurance sampling (LQAS) was evaluated for rapid low cost identification of communities where Schistosoma mansoni infection was hyperendemic in southern Madagascar. In the study area, S. mansoni infection shows very focused and heterogeneous distribution requiring multifariousness of local surveys. One sampling plan was tested in the field with schoolchildren and several others were simulated in the laboratory. Randomization and stool specimen collection were performed by voluntary teachers under direct supervision of the study staff and no significant problem occurred. As expected from Receiver Operating Characteristic (ROC) curves, all sampling plans allowed correct identification of hyperendemic communities and of most of the hypoendemic ones. Frequent misclassifications occurred for communities with intermediate prevalence and the cheapest plans had very low specificity. The study confirmed that LQAS would be a valuable tool for large scale screening in a country with scarce financial and staff resources. Involving teachers, appeared to be quite feasible and should not lower the reliability of surveys. We recommend that the national schistosomiasis control programme systematically uses LQAS for identification of communities, provided that sample sizes are adapted to the specific epidemiological patterns of S. mansoni infection in the main regions.

  16. Environmental Survey preliminary report, Argonne National Laboratory, Argonne, Illinois

    International Nuclear Information System (INIS)

    1988-11-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Argonne National Laboratory (ANL), conducted June 15 through 26, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ANL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S ampersand A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S ampersand A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the S ampersand A results will be incorporated into the Argonne National Laboratory Environmental Survey findings for inclusion in the Environmental Survey Summary Report. 75 refs., 24 figs., 60 tabs

  17. Environmental Survey preliminary report, Argonne National Laboratory, Argonne, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    1988-11-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Argonne National Laboratory (ANL), conducted June 15 through 26, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with ANL. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at ANL, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the S A results will be incorporated into the Argonne National Laboratory Environmental Survey findings for inclusion in the Environmental Survey Summary Report. 75 refs., 24 figs., 60 tabs.

  18. Radiological survey results at 4400 Piehl Road, Ottawa Lake, Michigan

    International Nuclear Information System (INIS)

    Foley, R.D.; Johnson, C.A.

    1993-04-01

    At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 4400 Piehl Road in Ottawa Lake, Michigan. The survey was performed in September, 1992. The purpose of the survey was to determine if materials containing uranium from work performed under government contract at the former Baker Brothers facility in Toledo, Ohio had been transported off-site to this neighboring area. The radiological survey included surface gamma scans indoors and outdoors, alpha and beta scans inside the house and attached garage, beta-gamma scans of the hard surfaces outside, and the collection of soil, water, and dust samples for radionuclide analyses. Results of the survey demonstrated that the majority of the measurements on the property were within DOE guidelines. However, the presence of isolated spots of uranium contamination were found in two areas where materials were allegedly transported to the property from the former Baker Brothers site. Uranium uptake by persons on the property by ingestion is fairly unlikely, but inhalation is a possibility. Based on these findings, it is recommended that the residential property at 4400 Piehl Road in Ottawa Lake, Michigan be considered for inclusion under FUSRAP

  19. Coupling methods for multistage sampling

    OpenAIRE

    Chauvet, Guillaume

    2015-01-01

    Multistage sampling is commonly used for household surveys when there exists no sampling frame, or when the population is scattered over a wide area. Multistage sampling usually introduces a complex dependence in the selection of the final units, which makes asymptotic results quite difficult to prove. In this work, we consider multistage sampling with simple random without replacement sampling at the first stage, and with an arbitrary sampling design for further stages. We consider coupling ...

  20. Job Satification And Performance Of Academic Librarians In ...

    African Journals Online (AJOL)

    A survey of the examination of the factors that affect job satisfaction and performance of academic librarians was conducted on selected eight universities comprising both state and federal universities, in southwest Nigeria. Simple random sampling technique was use to select 130 respondents across the institution of study.

  1. Performance evaluation of an importance sampling technique in a Jackson network

    Science.gov (United States)

    brahim Mahdipour, E.; Masoud Rahmani, Amir; Setayeshi, Saeed

    2014-03-01

    Importance sampling is a technique that is commonly used to speed up Monte Carlo simulation of rare events. However, little is known regarding the design of efficient importance sampling algorithms in the context of queueing networks. The standard approach, which simulates the system using an a priori fixed change of measure suggested by large deviation analysis, has been shown to fail in even the simplest network settings. Estimating probabilities associated with rare events has been a topic of great importance in queueing theory, and in applied probability at large. In this article, we analyse the performance of an importance sampling estimator for a rare event probability in a Jackson network. This article carries out strict deadlines to a two-node Jackson network with feedback whose arrival and service rates are modulated by an exogenous finite state Markov process. We have estimated the probability of network blocking for various sets of parameters, and also the probability of missing the deadline of customers for different loads and deadlines. We have finally shown that the probability of total population overflow may be affected by various deadline values, service rates and arrival rates.

  2. Evaluation of the performance of the shields in the EPMAs used for radioactive samples

    International Nuclear Information System (INIS)

    Matsui, Hiroki; Suzuki, Miho; Obata, Hiroki; Kanazawa, Hiroyuki

    2014-06-01

    The Reactor Fuel Examination Facility (RFEF) in Japan Atomic Energy Agency (JAEA) has been used for Post Irradiation Examinations (PIEs) to verify the reliability and safety of the nuclear fuels irradiated in commercial reactors. EPMA (Electron Probe Micro Analyzer) has been utilized for the qualitative analysis of the fission product in the fuel pellet and the detailed observation of the oxide layers formed at the inner and outer surfaces of fuel cladding. Commercial EPMAs were remodeled so that the EPMAs can be applied for radioactive samples. Several shields were set in the EPMA to avoid the gamma-rays which radiate from a radioactive sample to the proportional counter in the EPMA. It is important to calculate this shielding performance adequately to maintain the precision of analysis. This report describes the results of re-evaluation of the performance of the shields in the EPMAs in the RFEF by using the Particle and Heavy Ion Transport Code System (PHITS) and the examination results of gamma-ray effect to the X-ray spectrum data by using a radioactive sample. (author)

  3. Species undersampling in tropical bat surveys: effects on emerging biodiversity patterns.

    Science.gov (United States)

    Meyer, Christoph F J; Aguiar, Ludmilla M S; Aguirre, Luis F; Baumgarten, Julio; Clarke, Frank M; Cosson, Jean-François; Estrada Villegas, Sergio; Fahr, Jakob; Faria, Deborah; Furey, Neil; Henry, Mickaël; Jenkins, Richard K B; Kunz, Thomas H; Cristina MacSwiney González, M; Moya, Isabel; Pons, Jean-Marc; Racey, Paul A; Rex, Katja; Sampaio, Erica M; Stoner, Kathryn E; Voigt, Christian C; von Staden, Dietrich; Weise, Christa D; Kalko, Elisabeth K V

    2015-01-01

    sampling protocols, and consequently for increasing the cost-effectiveness in tropical bat surveys or monitoring programmes. The dependence of the performance of species subsets on structural assemblage characteristics (total assemblage abundance, proportion of rare species), however, underscores the importance of adaptive monitoring schemes and of establishing surrogate performance on a site by site basis based on pilot surveys. © 2014 The Authors. Journal of Animal Ecology © 2014 British Ecological Society.

  4. The Evaluation of Teachers' Job Performance Based on Total Quality Management (TQM)

    Science.gov (United States)

    Shahmohammadi, Nayereh

    2017-01-01

    This study aimed to evaluate teachers' job performance based on total quality management (TQM) model. This was a descriptive survey study. The target population consisted of all primary school teachers in Karaj (N = 2917). Using Cochran formula and simple random sampling, 340 participants were selected as sample. A total quality management…

  5. The effect of mode and context on survey results: Analysis of data from the Health Survey for England 2006 and the Boost Survey for London

    Directory of Open Access Journals (Sweden)

    Roth Marilyn A

    2010-09-01

    Full Text Available Abstract Background Health-related data at local level could be provided by supplementing national health surveys with local boosts. Self-completion surveys are less costly than interviews, enabling larger samples to be achieved for a given cost. However, even when the same questions are asked with the same wording, responses to survey questions may vary by mode of data collection. These measurement differences need to be investigated further. Methods The Health Survey for England in London ('Core' and a London Boost survey ('Boost' used identical sampling strategies but different modes of data collection. Some data were collected by face-to-face interview in the Core and by self-completion in the Boost; other data were collected by self-completion questionnaire in both, but the context differed. Results were compared by mode of data collection using two approaches. The first examined differences in results that remained after adjusting the samples for differences in response. The second compared results after using propensity score matching to reduce any differences in sample composition. Results There were no significant differences between the two samples for prevalence of some variables including long-term illness, limiting long-term illness, current rates of smoking, whether participants drank alcohol, and how often they usually drank. However, there were a number of differences, some quite large, between some key measures including: general health, GHQ12 score, portions of fruit and vegetables consumed, levels of physical activity, and, to a lesser extent, smoking consumption, the number of alcohol units reported consumed on the heaviest day of drinking in the last week and perceived social support (among women only. Conclusion Survey mode and context can both affect the responses given. The effect is largest for complex question modules but was also seen for identical self-completion questions. Some data collected by interview and self

  6. Organizational Justice as an Antecedent of Job Performance

    Directory of Open Access Journals (Sweden)

    Aizzat Mohd. Nasurdin

    2013-06-01

    Full Text Available The present research examines the influence of organizational justice (distributive justice and procedural justice on predicting job performance (task performance and contextual performance. Survey data were drawn from a sample of 136 customer-contact employees within the telecommunications industry in Malaysia. Results of the regression analysis illustrate that distributive justice alone has a significant and positive relationship with task performance. On the other hand, only procedural justice is found to be significantly and positively related to contextual performance. Implications of the findings and directions for future research are highlighted.

  7. Ergonomics in office-based surgery: a survey-guided observational study.

    Science.gov (United States)

    Esser, Adam C; Koshy, James G; Randle, Henry W

    2007-11-01

    The practice of office-based surgery is increasing in many specialties. Using Mohs surgery as a model, we investigated the role of ergonomics in office-based surgery to limit work-related musculoskeletal disorders. All Mayo Clinic surgeons currently performing Mohs surgery and Mohs surgeons trained at Mayo Clinic between 1990 and 2004 received a questionnaire survey between May 2003 and September 2004. A sample of respondents were videotaped during surgery. The main outcome measures were survey responses and an ergonomist's identification of potential causes of musculoskeletal disorders. All 17 surgeons surveyed responded. Those surveyed spend a mean of 24 hours per week in surgery. Sixteen said they had symptoms caused by or made worse by performing surgery. Symptom onset occurred on average at age 35.4 years. The most common complaints were pain and stiffness in the neck, shoulders, and lower back and headaches. Videotapes of 6 surgeons revealed problems with operating room setup, awkward posture, forceful exertion, poor positioning, lighting, and duration of procedures. Symptoms of musculoskeletal injuries are common and may begin early in a physician's career. Modifying footwear, flooring, table height, operating position, lighting, and surgical instruments may improve the ergonomics of office-based surgery.

  8. Authoritarian Parenting and Asian Adolescent School Performance: Insights from the US and Taiwan

    Science.gov (United States)

    Pong, Suet-ling; Johnston, Jamie; Chen, Vivien

    2014-01-01

    Our study re-examines the relationship between parenting and school performance among Asian students. We use two sources of data: wave I of the Adolescent Health Longitudinal Survey (Add Health), and waves I and II of the Taiwan Educational Panel Survey (TEPS). Analysis using Add Health reveals that the Asian-American/European-American difference in the parenting–school performance relationship is due largely to differential sample sizes. When we select a random sample of European-American students comparable to the sample size of Asian-American students, authoritarian parenting also shows no effect for European-American students. Furthermore, analysis of TEPS shows that authoritarian parenting is negatively associated with children's school achievement, while authoritative parenting is positively associated. This result for Taiwanese Chinese students is similar to previous results for European-American students in the US. PMID:24850978

  9. Delayed match-to-sample early performance decrement in monkeys after 60Co irradiation

    International Nuclear Information System (INIS)

    Bruner, A.; Bogo, V.; Jones, R.K.

    1975-01-01

    Sixteen monkeys were trained on a delayed match-to-sample task (DMTS) based on shock avoidance and irradiated with single, whole-body exposures of from 396 to 2000 rad 60 Co (midbody dose) at between 163 and 233 rad/min. Pre- to post-irradiation performance changes were assessed using a penalty-scaling measure which differentially weighted incorrect responses, response omissions, and error-omission sequences. Thirteen of the animals displayed early performance decrement, including five incapacitations, at lower doses (less than 1000 rad) than heretofore found effective. This was considered a function of task complexity, measurement sensitivity, and gamma effectiveness. The minimum effective midbody dose for inducing decrement using the DMTS task was estimated to be on the order of 500 rad. The nature of early, transient performance decrement seems to reflect more of an inability to perform than an inability to perform correctly

  10. Roadside Survey of Ants on Oahu, Hawaii

    Science.gov (United States)

    Tong, Reina L.; Grace, J. Kenneth; Krushelnycky, Paul D.

    2018-01-01

    Hawaii is home to over 60 ant species, including five of the six most damaging invasive ants. Although there have been many surveys of ants in Hawaii, the last island-wide hand-collection survey of ants on Oahu was conducted in 1988–1994. In 2012, a timed hand-collection of ants was made at 44 sites in a systematic, roadside survey throughout Oahu. Ants were identified and species distribution in relation to elevation, precipitation and soil type was analyzed. To assess possible convenience sampling bias, 15 additional sites were sampled further from roads to compare with the samples near roads. Twenty-four species of ants were found and mapped; Pheidole megacephala (F.), Ochetellus glaber (Mayr), and Technomyrmex difficilis Forel were the most frequently encountered ants. For six ant species, a logistic regression was performed with elevation, average annual precipitation, and soil order as explanatory variables. O. glaber was found in areas with lower precipitation around Oahu. Paratrechina longicornis (Latrielle) and Tetramorium simillimum (Smith, F.) were found more often in lower elevations and in areas with the Mollisol soil order. Elevation, precipitation, and soil type were not significant sources of variation for P. megacephala, Plagiolepis alluaudi Emery, and T. difficilis. P. megacephala was associated with fewer mean numbers of ants where it occurred. Ant assemblages near and far from roads did not significantly differ. Many species of ants remain established on Oahu, and recent invaders are spreading throughout the island. Mapping ant distributions contributes to continued documentation and understanding of these pests. PMID:29439503

  11. Workplace bullying and relationships with health and performance among a sample of New Zealand veterinarians.

    Science.gov (United States)

    Gardner, D H; Rasmussen, W

    2018-03-01

    To examine the relationships between workplace bullying, destructive leadership and team conflict, and physical health, strain, self-reported performance and intentions to quit among veterinarians in New Zealand, and how these relationships could be moderated by psychological capital and perceived organisational support. Data were collected by means of an online survey, distributed to members of the New Zealand Veterinary Association. Participation was voluntary and all responses were anonymous and confidential. Scores for the variables measured were based on responses to questions or statements with responses categorised on a linear scale. A series of regression analyses were used to assess mediation or moderation by intermediate variables on the relationships between predictor variables and dependent variables. Completed surveys were provided by 197 veterinarians, of which 32 (16.2%) had been bullied at work, i.e. they had experienced two or more negative acts at least weekly over the previous 6 months, and nine (4.6%) had experienced cyber-bullying. Mean scores for workplace bullying were higher for female than male respondents, and for non-managers than managers (pbullying were positively associated with scores for destructive leadership and team conflict, physical health, strain, and intentions to quit (pbullying and team conflict mediated the relationship between destructive leadership and strain, physical health and intentions to quit. Perceived organisational support moderated the effects of workplace bullying on strain and self-reported job performance (pbullied. The negative effects of destructive leadership on strain, physical health and intentions to quit were mediated by team conflict and workplace bullying. It should be noted that the findings of this study were based on a survey of self-selected participants and the findings may not represent the wider population of New Zealand veterinarians.

  12. Determination of pharmaceutical compounds in surface- and ground-water samples by solid-phase extraction and high-performance liquid chromatography-electrospray ionization mass spectrometry

    Science.gov (United States)

    Cahill, J.D.; Furlong, E.T.; Burkhardt, M.R.; Kolpin, D.; Anderson, L.G.

    2004-01-01

    Commonly used prescription and over-the-counter pharmaceuticals are possibly present in surface- and ground-water samples at ambient concentrations less than 1 μg/L. In this report, the performance characteristics of a combined solid-phase extraction isolation and high-performance liquid chromatography–electrospray ionization mass spectrometry (HPLC–ESI-MS) analytical procedure for routine determination of the presence and concentration of human-health pharmaceuticals are described. This method was developed and used in a recent national reconnaissance of pharmaceuticals in USA surface waters. The selection of pharmaceuticals evaluated for this method was based on usage estimates, resulting in a method that contains compounds from diverse chemical classes, which presents challenges and compromises when applied as a single routine analysis. The method performed well for the majority of the 22 pharmaceuticals evaluated, with recoveries greater than 60% for 12 pharmaceuticals. The recoveries of angiotensin-converting enzyme inhibitors, a histamine (H2) receptor antagonist, and antihypoglycemic compound classes were less than 50%, but were retained in the method to provide information describing the potential presence of these compounds in environmental samples and to indicate evidence of possible matrix enhancing effects. Long-term recoveries, evaluated from reagent-water fortifications processed over 2 years, were similar to initial method performance. Method detection limits averaged 0.022 μg/L, sufficient for expected ambient concentrations. Compound-dependent matrix effects on HPLC/ESI-MS analysis, including enhancement and suppression of ionization, were observed as a 20–30% increase in measured concentrations for three compounds and greater than 50% increase for two compounds. Changing internal standard and more frequent ESI source maintenance minimized matrix effects. Application of the method in the national survey demonstrates that several

  13. Aerial radiological survey of the Grand Gulf Nuclear Station and surrounding area, Port Gibson, Mississippi. Date of survey: March 1982

    International Nuclear Information System (INIS)

    Ballatore, L.A.; Hilton, L.K.

    1982-09-01

    An aerial radiological survey was performed from 11 to 20 March 1982 over a 260-square-kilometer area centered on the Grand Gulf Nuclear Station at Port Gibson, Mississippi (the station was not yet in operation at the time of the survey). All gamma ray data were collected by flying east-west lines spaced 152 meters apart at an altitude 91 meters above ground level. Processed data showed that all gamma rays detected within the survey area were those expected from naturally occurring terrestrial background emitters. Count rates obtained from the aerial platform were converted to exposure rates at 1 meter above the ground and are presented in the form of an isoradiation contour map. The observed exposure rates were between 5 and 13 microroentgens per hour (μR/h), with most of the area ranging from 9 to 10 μR/h. These values include an estimated cosmic ray contribution of 3.6 μR/h. The exposure rate obtained from soil samples and ionization chamber measurements taken from within the survey site displayed positive agreement with the aerial data

  14. Automotive Mechanics Occupational Performance Survey. Interim Report.

    Science.gov (United States)

    Borcher, Sidney D.; Leiter, Paul B.

    The purpose of this federally-funded interim report is to present the results of a task inventory analysis survey of automotive mechanics completed by project staff within the Instructional Systems Design Program at the Center for Vocational and Technical Education. Intended for use in curriculum development for vocational education programs in…

  15. Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

  16. Groundwater sampling in uranium reconnaissance

    International Nuclear Information System (INIS)

    Butz, T.R.

    1977-03-01

    The groundwater sampling program is based on the premise that ground water geochemistry reflects the chemical composition of, and geochemical processes active in the strata from which the sample is obtained. Pilot surveys have shown that wells are the best source of groundwater, although springs are sampled on occasion. The procedures followed in selecting a sampling site, the sampling itself, and the field measurements, as well as the site records made, are described

  17. A study on the representative sampling survey for the inspection of the clearance level for the radioisotope waste

    International Nuclear Information System (INIS)

    Hong Joo Ahn; Se Chul Sohn; Kwang Yong Jee; Ju Youl Kim; In Koo Lee

    2007-01-01

    Utilization facilities for radioisotope (RI) are increasing annually in South Korea, and the total number was 2,723, as of December 31, 2005. The inspection of a clearance level is a very important problem in order to ensure a social reliance for releasing radioactive materials to the environment. Korean regulations for such a clearance are described in Notice No. 2001-30 of the Ministry of Science and Technology (MOST) and Notice No. 2002-67 of the Ministry of Commerce, Industry and Energy (MOCIE). Most unsealed sources in RI waste drums at a storage facility are low-level beta-emitters with short half-lives, so it is impossible to measure their inventories by a nondestructive analysis. Furthermore, RI wastes generated from hospital, educational and research institutes and industry have a heterogeneous, multiple, irregular, and a small quantity of a waste stream. This study addresses a representative (master) sampling survey and analysis plan for RI wastes because a complete enumeration of waste drums is impossible and not desirable in terms of a cost and efficiency. The existing approaches to a representative sampling include a judgmental, simple random, stratified random, systematic grid, systematic random, composite, and adaptive sampling. A representative sampling plan may combine two or more of the above sampling approaches depending on the type and distribution of a waste stream. Stratified random sampling (constrained randomization) is proven to be adequate for a sampling design of a RI waste regarding a half-life, surface dose, undertaking time to a storage facility, and type of waste. The developed sampling protocol includes estimating the number of drums within a waste stream, estimating the number of samples, and a confirmation of the required number of samples. The statistical process control for a quality assurance plan includes control charts and an upper control limit (UCL) of 95% to determine whether a clearance level is met or not. (authors)

  18. Results of the radiological survey at the former Associate Aircraft Tool and Manufacturing Company site, Fairfield, Ohio (FOH001)

    International Nuclear Information System (INIS)

    Murray, M.E.; Carrier, R.F.; Mathis, R.A.

    1993-03-01

    At the request of the US Department of Energy (DOE), a team from oak Ridge National Laboratory conducted a radiological survey of the former Associate Aircraft Tool and Manufacturing Company facility, Fairfield, Ohio. The survey was performed in July and September 1992. The purpose of the survey was to determine if the facility had become contaminated with residuals containing radioactive materials during the work performed under government contract from February to September, 1956. The survey included gamma scanning over a circumscribed area around and outside of the building, and gamma scanning over most accessible indoor floor surfaces as well as the collection of soil and other samples for radionuclide analyses. Roof trusses were beta-gamma scanned in locations where floor contamination was found. Results of the survey demonstrated radionuclide concentrations in indoor and outdoor samples, and radiation measurements over floor and overhead surfaces, in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines. Elevated uranium concentrations outdoors were limited to several small, isolated spots. Radiation measurements exceeded guidelines indoors over numerous spots and areas inside the building, mainly in the areas that had been used in the early government work

  19. Recommended procedures for performance testing of radiobioassay laboratories: Volume 2, In vitro samples

    International Nuclear Information System (INIS)

    Fenrick, H.W.; MacLellan, J.A.

    1988-11-01

    Draft American National Standards Institute (ANSI) Standard N13.30 (Performance Criteria for Radiobioassay) was developed for the US Department of Energy and the US Nuclear Regulatory Commission to help ensure that bioassay laboratories provide accurate and consistent results. The draft standard specifies the criteria for defining the procedures necessary to establish a bioassay performance-testing laboratory and program. The bioassay testing laboratory will conduct tests to evaluate the performance of service laboratories. Pacific Northwest Laboratory helped develop testing procedures as part of an effort to evaluate the performance criteria by testing the existing measurement capabilities of various bioassay laboratories. This report recommends guidelines for the preparation, handling, storage, distribution, shipping, and documentation of in vitro test samples (artificial urine and fecal matter) for indirect bioassay. The data base and recommended records system for documenting radiobioassay performance at the service laboratories are also presented. 8 refs., 3 tabs

  20. Short Communication: A Simple Method for Performing Worm-Egg Counts on Sodium Acetate Formaldehyde-Preserved Samples

    Directory of Open Access Journals (Sweden)

    Wayne Melrose

    2012-01-01

    Full Text Available The Kato Katz method is the most common way of performing worm-egg counts on human faecal samples, but it must be done in the field using freshly collected samples. This makes it difficult to use in remote, poorly accessible situations. This paper describes a simple method for egg counts on preserved samples collected in the field and sent to a central location for further processing.

  1. Symptom burden and its relationship to functional performance in patients with chronic obstructive pulmonary disease

    OpenAIRE

    Melhem, Omar

    2016-01-01

    The aim of this study was to explore symptom burden and its relationship to functional performance in patients with COPD. A descriptive, cross-sectional, correlational survey design was used and a sample of 214 patients with COPD. The sample was recruited from patients attending one of the major teaching hospitals in Dublin. Symptom burden was measured using the Memorial Symptom Assessment Scale (MSAS), and the functional performance was measured using the Functional Performance Inventory-Sho...

  2. Geochemical reanalysis of historical U.S. Geological Survey sediment samples from the northeastern Alaska Range, Healy, Mount Hayes, Nabesna, and Tanacross quadrangles, Alaska

    Science.gov (United States)

    Werdon, Melanie B.; Granitto, Matthew; Azain, Jaime S.

    2015-01-01

    The State of Alaska’s Strategic and Critical Minerals (SCM) Assessment project, a State-funded Capital Improvement Project (CIP), is designed to evaluate Alaska’s statewide potential for SCM resources. The SCM Assessment is being implemented by the Alaska Division of Geological & Geophysical Surveys (DGGS), and involves obtaining new airborne-geophysical, geological, and geochemical data. As part of the SCM Assessment, thousands of historical geochemical samples from DGGS, U.S. Geological Survey (USGS), and U.S. Bureau of Mines archives are being reanalyzed by DGGS using modern, quantitative, geochemical-analytical methods. The objective is to update the statewide geochemical database to more clearly identify areas in Alaska with SCM potential. The USGS is also undertaking SCM-related geologic studies in Alaska through the federally funded Alaska Critical Minerals cooperative project. DGGS and USGS share the goal of evaluating Alaska’s strategic and critical minerals potential and together created a Letter of Agreement (signed December 2012) and a supplementary Technical Assistance Agreement (#14CMTAA143458) to facilitate the two agencies’ cooperative work. Under these agreements, DGGS contracted the USGS in Denver to reanalyze historical USGS sediment samples from Alaska. For this report, DGGS funded reanalysis of 670 historical USGS sediment samples from the statewide Alaska Geochemical Database Version 2.0 (AGDB2; Granitto and others, 2013). Samples were chosen from the northeastern Alaska Range, in the Healy, Mount Hayes, Nabesna, and Tanacross quadrangles, Alaska (fig. 1). The USGS was responsible for sample retrieval from the National Geochemical Sample Archive (NGSA) in Denver, Colorado through the final quality assurance/quality control (QA/QC) of the geochemical analyses obtained through the USGS contract lab. The new geochemical data are published in this report as a coauthored DGGS report, and will be incorporated into the statewide geochemical

  3. Visual Sample Plan Version 7.0 User's Guide

    Energy Technology Data Exchange (ETDEWEB)

    Matzke, Brett D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Newburn, Lisa LN [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hathaway, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilson, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dowson, Scott T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sego, Landon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pulsipher, Brent A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-03-01

    User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination. The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.

  4. Chapter 6. Dwarf mistletoe surveys

    Science.gov (United States)

    J.A. Muir; B. Moody

    2002-01-01

    Dwarf mistletoe surveys are conducted for a variety of vegetation management objectives. Various survey and sampling techniques are used either at a broad, landscape scale in forest planning or program review, or at an individual, stand, site level for specific project implementation. Standard and special surveys provide data to map mistletoe distributions and quantify...

  5. Extreme Variability Quasars from the Sloan Digital Sky Survey and the Dark Energy Survey

    Science.gov (United States)

    Rumbaugh, N.; Shen, Yue; Morganson, Eric; Liu, Xin; Banerji, M.; McMahon, R. G.; Abdalla, F. B.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Capozzi, D.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Cunha, C. E.; D’Andrea, C. B.; da Costa, L. N.; DePoy, D. L.; Desai, S.; Doel, P.; Frieman, J.; García-Bellido, J.; Gruen, D.; Gruendl, R. A.; Gschwend, J.; Gutierrez, G.; Honscheid, K.; James, D. J.; Kuehn, K.; Kuhlmann, S.; Kuropatkin, N.; Lima, M.; Maia, M. A. G.; Marshall, J. L.; Martini, P.; Menanteau, F.; Plazas, A. A.; Reil, K.; Roodman, A.; Sanchez, E.; Scarpine, V.; Schindler, R.; Schubnell, M.; Sheldon, E.; Smith, M.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Walker, A. R.; Wester, W.; (DES Collaboration

    2018-02-01

    We perform a systematic search for long-term extreme variability quasars (EVQs) in the overlapping Sloan Digital Sky Survey and 3 Year Dark Energy Survey imaging, which provide light curves spanning more than 15 years. We identified ∼1000 EVQs with a maximum change in g-band magnitude of more than 1 mag over this period, about 10% of all quasars searched. The EVQs have L bol ∼ 1045–1047 erg s‑1 and L/L Edd ∼ 0.01–1. Accounting for selection effects, we estimate an intrinsic EVQ fraction of ∼30%–50% among all g≲ 22 quasars over a baseline of ∼15 yr. We performed detailed multi-wavelength, spectral, and variability analyses for the EVQs and compared them to their parent quasar sample. We found that EVQs are distinct from a control sample of quasars matched in redshift and optical luminosity: (1) their UV broad emission lines have larger equivalent widths; (2) their Eddington ratios are systematically lower; and (3) they are more variable on all timescales. The intrinsic difference in quasar properties for EVQs suggests that internal processes associated with accretion are the main driver for the observed extreme long-term variability. However, despite their different properties, EVQs seem to be in the tail of a continuous distribution of quasar properties, rather than standing out as a distinct population. We speculate that EVQs are normal quasars accreting at relatively low rates, where the accretion flow is more likely to experience instabilities that drive the changes in flux by a factor of a few on multi-year timescales.

  6. Effect of the Target Motion Sampling Temperature Treatment Method on the Statistics and Performance

    Science.gov (United States)

    Viitanen, Tuomas; Leppänen, Jaakko

    2014-06-01

    Target Motion Sampling (TMS) is a stochastic on-the-fly temperature treatment technique that is being developed as a part of the Monte Carlo reactor physics code Serpent. The method provides for modeling of arbitrary temperatures in continuous-energy Monte Carlo tracking routines with only one set of cross sections stored in the computer memory. Previously, only the performance of the TMS method in terms of CPU time per transported neutron has been discussed. Since the effective cross sections are not calculated at any point of a transport simulation with TMS, reaction rate estimators must be scored using sampled cross sections, which is expected to increase the variances and, consequently, to decrease the figures-of-merit. This paper examines the effects of the TMS on the statistics and performance in practical calculations involving reaction rate estimation with collision estimators. Against all expectations it turned out that the usage of sampled response values has no practical effect on the performance of reaction rate estimators when using TMS with elevated basis cross section temperatures (EBT), i.e. the usual way. With 0 Kelvin cross sections a significant increase in the variances of capture rate estimators was observed right below the energy region of unresolved resonances, but at these energies the figures-of-merit could be increased using a simple resampling technique to decrease the variances of the responses. It was, however, noticed that the usage of the TMS method increases the statistical deviances of all estimators, including the flux estimator, by tens of percents in the vicinity of very strong resonances. This effect is actually not related to the usage of sampled responses, but is instead an inherent property of the TMS tracking method and concerns both EBT and 0 K calculations.

  7. Automated transient identification in the Dark Energy Survey

    Energy Technology Data Exchange (ETDEWEB)

    Goldstein, D. A. [Univ. of California, Berkeley, CA (United States); Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). et al.

    2015-08-20

    We describe an algorithm for identifying point-source transients and moving objects on reference-subtracted optical images containing artifacts of processing and instrumentation. The algorithm makes use of the supervised machine learning technique known as Random Forest. We present results from its use in the Dark Energy Survey Supernova program (DES-SN), where it was trained using a sample of 898,963 signal and background events generated by the transient detection pipeline. After reprocessing the data collected during the first DES-SN observing season (2013 September through 2014 February) using the algorithm, the number of transient candidates eligible for human scanning decreased by a factor of 13.4, while only 1.0 percent of the artificial Type Ia supernovae (SNe) injected into search images to monitor survey efficiency were lost, most of which were very faint events. Here we characterize the algorithm's performance in detail, and we discuss how it can inform pipeline design decisions for future time-domain imaging surveys, such as the Large Synoptic Survey Telescope and the Zwicky Transient Facility.

  8. 2010 Dry and 2009 - 2010 Wet Season Branchiopod Survey Report, Site 300

    Energy Technology Data Exchange (ETDEWEB)

    Dexter, W

    2011-03-14

    Lawrence Livermore National Laboratory (LLNL) requested that Condor Country Consulting, Inc. (CCCI) perform wet season surveys and manage the dry season sampling for listed branchiopods in two ponded locations within the Site 300 Experimental Test Site. Site 300 is located in Alameda and San Joaquin Counties, located between the Cities of Livermore and Tracy. The two pool locations have been identified for possible amphibian enhancement activities in support of the Compensation Plan for impacts tied to the Building 850 soil clean-up project. The Building 850 project design resulted in formal consultation with the U.S. Fish and Wildlife Service (USFWS) as an amendment (File 81420-2009-F-0235) to the site-wide Biological Opinion (BO) (File 1-1-02-F-0062) in the spring of 2009 and requires mitigation for the California tiger salamander (AMCA, Ambystoma californiense) and California red-legged frog (CRLF, Rana draytonii) habitat loss. Both pools contain breeding AMCA, but do not produce metamorphs due to limited hydroperiod. The pool to the southeast (Pool BC-FS-2) is the preferred site for amphibian enhancement activities, and the wetland to northwest (Pool OA-FS-1) is the alternate location for enhancement. However, prior to enhancement, LLNL has been directed by USFWS (BO Conservation Measure 17 iii) to 'conduct USFWS protocol-level branchiopod surveys to determine whether listed brachiopod species are present within the compensation area.' CCCI conducted surveys for listed branchiopods in the 2009-2010 wet season to determine the presence of federally-listed branchiopods at the two pools (previous surveys with negative findings were performed by CCCI in 2001-2002 and 2002-2003 onsite). Surveys were conducted to partially satisfy the survey requirements of the USFWS 'Interim Survey Guidelines to Permittees for Recovery Permits under Section 10(a)(1)(A) of the Endangered Species Act for the Listed Vernal Pool Branchiopods' ('Guidelines, USFWS

  9. Obscured AGN at z similar to 1 from the zCOSMOS-Bright Survey : I. Selection and optical properties of a [Ne v]-selected sample

    NARCIS (Netherlands)

    Mignoli, M.; Vignali, C.; Gilli, R.; Comastri, A.; Zamorani, G.; Bolzonella, M.; Bongiorno, A.; Lamareille, F.; Nair, P.; Pozzetti, L.; Lilly, S. J.; Carollo, C. M.; Contini, T.; Kneib, J. -P.; Le Fevre, O.; Mainieri, V.; Renzini, A.; Scodeggio, M.; Bardelli, S.; Caputi, K.; Cucciati, O.; de la Torre, S.; de Ravel, L.; Franzetti, P.; Garilli, B.; Iovino, A.; Kampczyk, P.; Knobel, C.; Kovac, K.; Le Borgne, J. -F.; Le Brun, V.; Maier, C.; Pello, R.; Peng, Y.; Montero, E. Perez; Presotto, V.; Silverman, J. D.; Tanaka, M.; Tasca, L.; Tresse, L.; Vergani, D.; Zucca, E.; Bordoloi, R.; Cappi, A.; Cimatti, A.; Koekemoer, A. M.; McCracken, H. J.; Moresco, M.; Welikala, N.

    Aims. The application of multi-wavelength selection techniques is essential for obtaining a complete and unbiased census of active galactic nuclei (AGN). We present here a method for selecting z similar to 1 obscured AGN from optical spectroscopic surveys. Methods. A sample of 94 narrow-line AGN

  10. The prevalence of workaholism: a survey study in a nationally representative sample of Norwegian employees.

    Directory of Open Access Journals (Sweden)

    Cecilie Schou Andreassen

    Full Text Available Workaholism has become an increasingly popular area for empirical study. However, most studies examining the prevalence of workaholism have used non-representative samples and measures with poorly defined cut-off scores. To overcome these methodological limitations, a nationally representative survey among employees in Norway (N = 1,124 was conducted. Questions relating to gender, age, marital status, caretaker responsibility for children, percentage of full-time equivalent, and educational level were asked. Workaholism was assessed by the use of a psychometrically validated instrument (i.e., Bergen Work Addiction Scale. Personality was assessed using the Mini-International Personality Item Pool. Results showed that the prevalence of workaholism was 8.3% (95% CI  = 6.7-9.9%. An adjusted logistic regression analysis showed that workaholism was negatively related to age and positively related to the personality dimensions agreeableness, neuroticism, and intellect/imagination. Implications for these findings are discussed.

  11. A survey of large scale gamma irradiators in the United States

    International Nuclear Information System (INIS)

    Smyth, R.C.; Simmons, R.C.; Dougherty, D.K.

    1987-01-01

    NUS Corporation (NUS) was contracted by the US Department of Energy (DOE) to perform a survey of Cs-137 and Co-60 irradiators in the US. The results of this survey, in the form of matrix listings of irradiators and their specifications, are included in subsequent sections of this report. The US Department of Agriculture (USDA) will use the survey results as a preliminary guide for potential use in regionalized food irradiation research. The survey was limited to the identification of operable irradiators which are owned and/or operated by private industry, educational institutions, and government facilities. To the extent available, specific information for each unit was included in the report. This information includes radioactive material, chemical matrix of fuel, containment capsule material and form, curies per capsule and total activity, sample chamber size, and irradiator availability

  12. Twenty-Three High-Redshift Supernovae from the Institute for Astronomy Deep Survey: Doubling the Supernova Sample at z > 0.7

    Science.gov (United States)

    Barris, Brian J.; Tonry, John L.; Blondin, Stéphane; Challis, Peter; Chornock, Ryan; Clocchiatti, Alejandro; Filippenko, Alexei V.; Garnavich, Peter; Holland, Stephen T.; Jha, Saurabh; Kirshner, Robert P.; Krisciunas, Kevin; Leibundgut, Bruno; Li, Weidong; Matheson, Thomas; Miknaitis, Gajus; Riess, Adam G.; Schmidt, Brian P.; Smith, R. Chris; Sollerman, Jesper; Spyromilio, Jason; Stubbs, Christopher W.; Suntzeff, Nicholas B.; Aussel, Hervé; Chambers, K. C.; Connelley, M. S.; Donovan, D.; Henry, J. Patrick; Kaiser, Nick; Liu, Michael C.; Martín, Eduardo L.; Wainscoat, Richard J.

    2004-02-01

    We present photometric and spectroscopic observations of 23 high-redshift supernovae (SNe) spanning a range of z=0.34-1.03, nine of which are unambiguously classified as Type Ia. These SNe were discovered during the IfA Deep Survey, which began in 2001 September and observed a total of 2.5 deg2 to a depth of approximately m~25-26 in RIZ over 9-17 visits, typically every 1-3 weeks for nearly 5 months, with additional observations continuing until 2002 April. We give a brief description of the survey motivations, observational strategy, and reduction process. This sample of 23 high-redshift SNe includes 15 at z>=0.7, doubling the published number of objects at these redshifts, and indicates that the evidence for acceleration of the universe is not due to a systematic effect proportional to redshift. In combination with the recent compilation of Tonry et al. (2003), we calculate cosmological parameter density contours that are consistent with the flat universe indicated by the cosmic microwave background (Spergel et al. 2003). Adopting the constraint that Ωtotal=1.0, we obtain best-fit values of (Ωm,ΩΛ)=(0.33,0.67) using 22 SNe from this survey augmented by the literature compilation. We show that using the empty-beam model for gravitational lensing does not eliminate the need for ΩΛ>0. Experience from this survey indicates great potential for similar large-scale surveys while also revealing the limitations of performing surveys for z>1 SNe from the ground. CFHT: Based in part on observations obtained at the Canada-France-Hawaii Telescope (CFHT), which is operated by the National Research Council of Canada, the Institut National des Science de l'Univers of the Centre National de la Recherche Scientifique of France, and the University of Hawaii. CTIO: Based in part on observations taken at the Cerro Tololo Inter-American Observatory. Keck: Some of the data presented herein were obtained at the W. M. Keck Observatory, which is operated as a scientific partnership

  13. Stress level and academic performance of university students in ...

    African Journals Online (AJOL)

    This study examined the relationship between level of stress and students' academic performance in Universities in Kwara State, Nigeria. The study adopted a descriptive survey research design. Proportional stratified random sampling was used to select 300 students for the study. A “Students' Stress Level Questionnaire ...

  14. Preferential sampling in veterinary parasitological surveillance

    Directory of Open Access Journals (Sweden)

    Lorenzo Cecconi

    2016-04-01

    Full Text Available In parasitological surveillance of livestock, prevalence surveys are conducted on a sample of farms using several sampling designs. For example, opportunistic surveys or informative sampling designs are very common. Preferential sampling refers to any situation in which the spatial process and the sampling locations are not independent. Most examples of preferential sampling in the spatial statistics literature are in environmental statistics with focus on pollutant monitors, and it has been shown that, if preferential sampling is present and is not accounted for in the statistical modelling and data analysis, statistical inference can be misleading. In this paper, working in the context of veterinary parasitology, we propose and use geostatistical models to predict the continuous and spatially-varying risk of a parasite infection. Specifically, breaking with the common practice in veterinary parasitological surveillance to ignore preferential sampling even though informative or opportunistic samples are very common, we specify a two-stage hierarchical Bayesian model that adjusts for preferential sampling and we apply it to data on Fasciola hepatica infection in sheep farms in Campania region (Southern Italy in the years 2013-2014.

  15. The Effects of Organizational Justice on Positive Organizational Behavior: Evidence from a Large-Sample Survey and a Situational Experiment

    Science.gov (United States)

    Pan, Xiaofu; Chen, Mengyan; Hao, Zhichao; Bi, Wenfen

    2018-01-01

    Employees' positive organizational behavior (POB) is not only to promote organizational function but also improve individual and organizational performance. As an important concept in organizational research, organizational justice is thought to be a universal predictor of employee and organizational outcomes. The current set of two studies examined the effects of organizational justice (OJ) on POB of employees with two different studies, a large-sample survey and a situational experiment. In study 1, a total of 2,566 employees from 45 manufacturing enterprises completed paper-and-pencil questionnaires assessing organizational justice (OJ) and positive organizational behavior (POB) of employees. In study 2, 747 employees were randomly sampled to participate in the situational experiment with 2 × 2 between-subjects design. They were asked to read one of the four situational stories and to image that this situation happen to the person in the story or them, and then they were asked to imagine how the person in the story or they would have felt and what the person or they subsequently would have done. The results of study 1 suggested that OJ was correlated with POB of employees and OJ is a positive predictor of POB. The results of study 2 suggested that OJ had significant effects on POB and negative organizational behavior (NOB). Procedural justice accounted for significantly more variance than distributive justice in POB of employees. Distributive justice and procedural justice have different influences on POB and NOB in terms of effectiveness and direction. The effect of OJ on POB was greater than that of NOB. In addition, path analysis indicated that the direct effect of OJ on POB was smaller than its indirect effect. Thus, many intermediary effects could possibly be between them. PMID:29375434

  16. The Effects of Organizational Justice on Positive Organizational Behavior: Evidence from a Large-Sample Survey and a Situational Experiment.

    Science.gov (United States)

    Pan, Xiaofu; Chen, Mengyan; Hao, Zhichao; Bi, Wenfen

    2017-01-01

    Employees' positive organizational behavior (POB) is not only to promote organizational function but also improve individual and organizational performance. As an important concept in organizational research, organizational justice is thought to be a universal predictor of employee and organizational outcomes. The current set of two studies examined the effects of organizational justice (OJ) on POB of employees with two different studies, a large-sample survey and a situational experiment. In study 1, a total of 2,566 employees from 45 manufacturing enterprises completed paper-and-pencil questionnaires assessing organizational justice (OJ) and positive organizational behavior (POB) of employees. In study 2, 747 employees were randomly sampled to participate in the situational experiment with 2 × 2 between-subjects design. They were asked to read one of the four situational stories and to image that this situation happen to the person in the story or them, and then they were asked to imagine how the person in the story or they would have felt and what the person or they subsequently would have done. The results of study 1 suggested that OJ was correlated with POB of employees and OJ is a positive predictor of POB. The results of study 2 suggested that OJ had significant effects on POB and negative organizational behavior (NOB). Procedural justice accounted for significantly more variance than distributive justice in POB of employees. Distributive justice and procedural justice have different influences on POB and NOB in terms of effectiveness and direction. The effect of OJ on POB was greater than that of NOB. In addition, path analysis indicated that the direct effect of OJ on POB was smaller than its indirect effect. Thus, many intermediary effects could possibly be between them.

  17. Use of proficiency samples to assess diagnostic laboratories in France performing a Trichinella digestion assay.

    Science.gov (United States)

    Vallée, Isabelle; Macé, Pauline; Forbes, Lorry; Scandrett, Brad; Durand, Benoit; Gajadhar, Alvin; Boireau, Pascal

    2007-07-01

    Routine diagnosis of animal trichinellosis for food safety and trade relies on a method of artificial digestion to free Trichinella muscle larvae from meat for subsequent identification by microscopy. As part of a quality control system, the French National Reference Laboratory (NRL) initiated ring trials to determine the sensitivity of the test performed in the 72 routine diagnostic laboratories in France. A method was devised to obtain calibrated meat samples containing known numbers of capsules with Trichinella spiralis muscle larvae. This method was based on an incomplete artificial digestion of Trichinella-infected mice carcasses to allow the collection of intact Trichinella capsules. Capsules were placed into a meatball of 100 +/- 2 g of pork and horsemeat to produce proficiency samples. Three categories of samples were prepared: small (3 to 5 capsules), medium (7 to 10), and large (12 to 15). The sensitivity was expressed as the percentage of muscle larvae recovered from each proficiency sample. Reproducibility was tested with ring trials organized between two NRLs (France and Canada), and a reference sensitivity of 84.9% was established. National ring trials were then organized in France, with the 72 routine diagnostic laboratories each receiving four proficiency samples per session. After five sessions, an improvement in the digest test sensitivity was observed. Results at the fifth session indicated sensitivities of 78.60% +/- 23.70%, 81.19% +/- 19.59%, and 80.52% +/- 14.71% muscle larvae for small, medium, and large samples, respectively. This study supports the use of proficiency samples to accurately evaluate the performance of routine diagnostic laboratories that conduct digestion tests for animal trichinellosis diagnosis.

  18. A prevalence survey of every-day activities in pregnancy

    Directory of Open Access Journals (Sweden)

    Hadfield Ruth M

    2010-08-01

    Full Text Available Abstract Background Research into the effects of common activities during pregnancy is sparse and often contradictory. To examine whether common activities are an acute trigger of pregnancy complications the prevalence of these activities are necessary to determine sample size estimates. The aim of this study is to ascertain the prevalence of selected activities in any seven day period during pregnancy. Methods The study was conducted in the antenatal clinic of a teaching hospital with tertiary obstetric and neonatal care in Sydney, Australia between August 2008 and April 2009. Women who were at least 20 weeks pregnant and able to read English completed a questionnaire to assess whether they had performed a list of activities in the seven days prior to survey completion. Results were analysed using frequency tabulations, contingency table analyses and chi square tests. Results A total of 766 surveys were completed, 29 surveys were excluded as the women completing them were less than 20 weeks pregnant, while 161 women completed the survey more than once. Ninety seven per cent of women completed the survey when approached for the first time, while 87% completed the survey when approached a subsequent time. In the week prior to completing the survey 82.6% of women had consumed a caffeinated beverage, 42.1% had had sexual intercourse, 32.7% had lifted something over 12 kilograms, 21.4% had consumed alcohol and 6.4% had performed vigorous exercise. The weekly prevalence of heavy lifting was higher for multiparous women compared to nulliparous women. Conclusions The results of this study can be used to inform future research into activities as acute triggers of pregnancy complications.

  19. A NEAR-INFRARED SPECTROSCOPIC SURVEY OF COOL WHITE DWARFS IN THE SLOAN DIGITAL SKY SURVEY

    International Nuclear Information System (INIS)

    Kilic, Mukremin; Kowalski, Piotr M.; Von Hippel, Ted

    2009-01-01

    We present near-infrared photometric observations of 15 and spectroscopic observations of 38 cool white dwarfs (WDs). This is the largest near-infrared spectroscopic survey of cool WDs to date. Combining the Sloan Digital Sky Survey photometry and our near-infrared data, we perform a detailed model atmosphere analysis. The spectral energy distributions of our objects are explained fairly well by model atmospheres with temperatures ranging from 6300 K down to 4200 K. Two WDs show significant absorption in the infrared, and are best explained with mixed H/He atmosphere models. Based on the up-to-date model atmosphere calculations by Kowalski and Saumon, we find that the majority of the stars in our sample have hydrogen-rich atmospheres. We do not find any pure helium atmosphere WDs below 5000 K, and we find a trend of increasing hydrogen to helium ratio with decreasing temperature. These findings present an important challenge to understanding the spectral evolution of WDs.

  20. Primer on Health Surveys

    Directory of Open Access Journals (Sweden)

    David L Nordstrom

    2012-06-01

    Full Text Available The aim of this paper is to introduce novice researchers to surveys as a method of data collection. It starts with the definition of a survey, its major purposes and types as well as changes in the goals surveys have helped to achieve over time. Advantages and disadvantages of surveys over population censuses and medical examinations are discussed. Approaches to questionnaire construction are introduced along with properties that questionnaires are evaluated for. Modes of administration, sample size issues, and data analysis approaches are also introduced. The primer is illustrated with examples of surveys conducted in different countries with various public health purposes.

  1. Photometric classification of type Ia supernovae in the SuperNova Legacy Survey with supervised learning

    Energy Technology Data Exchange (ETDEWEB)

    Möller, A. [Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Ruhlmann-Kleider, V.; Leloup, C.; Neveu, J.; Palanque-Delabrouille, N.; Rich, J. [Irfu, SPP, CEA Saclay, F-91191 Gif sur Yvette Cedex (France); Carlberg, R. [Department of Astronomy and Astrophysics, University of Toronto, 50 St. George Street, Toronto, ON M5S 3H8 (Canada); Lidman, C. [Australian Astronomical Observatory, North Ryde, NSW 2113 (Australia); Pritchet, C., E-mail: anais.moller@anu.edu.au, E-mail: vanina.ruhlmann-kleider@cea.fr, E-mail: clement.leloup@cea.fr, E-mail: jneveu@lal.in2p3.fr, E-mail: nathalie.palanque-delabrouille@cea.fr, E-mail: james.rich@cea.fr, E-mail: raymond.carlberg@utoronto.ca, E-mail: chris.lidman@aao.gov.au, E-mail: pritchet@uvic.ca [Department of Physics and Astronomy, University of Victoria, P.O. Box 3055, Victoria, BC V8W 3P6 (Canada)

    2016-12-01

    In the era of large astronomical surveys, photometric classification of supernovae (SNe) has become an important research field due to limited spectroscopic resources for candidate follow-up and classification. In this work, we present a method to photometrically classify type Ia supernovae based on machine learning with redshifts that are derived from the SN light-curves. This method is implemented on real data from the SNLS deferred pipeline, a purely photometric pipeline that identifies SNe Ia at high-redshifts (0.2 < z < 1.1). Our method consists of two stages: feature extraction (obtaining the SN redshift from photometry and estimating light-curve shape parameters) and machine learning classification. We study the performance of different algorithms such as Random Forest and Boosted Decision Trees. We evaluate the performance using SN simulations and real data from the first 3 years of the Supernova Legacy Survey (SNLS), which contains large spectroscopically and photometrically classified type Ia samples. Using the Area Under the Curve (AUC) metric, where perfect classification is given by 1, we find that our best-performing classifier (Extreme Gradient Boosting Decision Tree) has an AUC of 0.98.We show that it is possible to obtain a large photometrically selected type Ia SN sample with an estimated contamination of less than 5%. When applied to data from the first three years of SNLS, we obtain 529 events. We investigate the differences between classifying simulated SNe, and real SN survey data. In particular, we find that applying a thorough set of selection cuts to the SN sample is essential for good classification. This work demonstrates for the first time the feasibility of machine learning classification in a high- z SN survey with application to real SN data.

  2. Photometric classification of type Ia supernovae in the SuperNova Legacy Survey with supervised learning

    International Nuclear Information System (INIS)

    Möller, A.; Ruhlmann-Kleider, V.; Leloup, C.; Neveu, J.; Palanque-Delabrouille, N.; Rich, J.; Carlberg, R.; Lidman, C.; Pritchet, C.

    2016-01-01

    In the era of large astronomical surveys, photometric classification of supernovae (SNe) has become an important research field due to limited spectroscopic resources for candidate follow-up and classification. In this work, we present a method to photometrically classify type Ia supernovae based on machine learning with redshifts that are derived from the SN light-curves. This method is implemented on real data from the SNLS deferred pipeline, a purely photometric pipeline that identifies SNe Ia at high-redshifts (0.2 < z < 1.1). Our method consists of two stages: feature extraction (obtaining the SN redshift from photometry and estimating light-curve shape parameters) and machine learning classification. We study the performance of different algorithms such as Random Forest and Boosted Decision Trees. We evaluate the performance using SN simulations and real data from the first 3 years of the Supernova Legacy Survey (SNLS), which contains large spectroscopically and photometrically classified type Ia samples. Using the Area Under the Curve (AUC) metric, where perfect classification is given by 1, we find that our best-performing classifier (Extreme Gradient Boosting Decision Tree) has an AUC of 0.98.We show that it is possible to obtain a large photometrically selected type Ia SN sample with an estimated contamination of less than 5%. When applied to data from the first three years of SNLS, we obtain 529 events. We investigate the differences between classifying simulated SNe, and real SN survey data. In particular, we find that applying a thorough set of selection cuts to the SN sample is essential for good classification. This work demonstrates for the first time the feasibility of machine learning classification in a high- z SN survey with application to real SN data.

  3. Methods of the National Nutrition Survey 1999

    OpenAIRE

    Resano-Pérez, Elsa; Méndez-Ramírez, Ignacio; Shamah-Levy, Teresa; Rivera, Juan A; Sepúlveda-Amor, Jaime

    2003-01-01

    OBJECTIVE: To describe the methods and analyses of the 1999 National Nutrition Survey (NNS-99). MATERIAL AND METHODS: The 1999 National Nutrition Survey (NNS-99) is a probabilistic survey with nationwide representativity. The NNS-99 included four regions and urban and rural areas of Mexico. The last sampling units were households, selected through stratified cluster sampling. The study population consisted of children under five years of age, school-age children (6-11 years), and women of chi...

  4. [A respondent-driven sampling survey on HIV and risk factors among men who have sex with men in Chongqing].

    Science.gov (United States)

    Ouyang, Lin; Feng, Lian-gui; Ding, Xian-bin; Zhao, Jin-kou; Xu, Jing; Han, Mei; Zhou, Chao

    2009-10-01

    To examine HIV prevalence and related risk factors among men who have sex with men (MSM) in Chongqing, and to explore the feasibility of using respondent-driven sampling (RDS) in the survey. Based on results from formative research, a RDS survey was designed and conducted to collect demographic, behavioral and serologic data. RDSAT was used to calculate point estimation and confidence intervals. SPSS was used for bi-variate analysis using RDSAT exported weighed data. NETDRAW was used to draw network diagram. Among 617 subjects recruited, the adjusted HIV and syphilis prevalence rates were 16.8% and 10.9%, respectively. 73.0% of the subjects were 20 to 29 years old and 72.9% were officially registered residents of Chongqing. 83.4% were single, with the proportion of students the highest, accounting for 24.6%. During the last six months, 83.4% of them reported ever having anal sex, and 54.0% reported having unprotected anal sex. This survey confirmed that Chongqing had a higher reported HIV prevalence among MSM than from other Chinese cities. Comprehensive intervention services were required to address this alarmingly high prevalence, with focus on intervention through internet and those having syphilis infection. RDS seemed one of the effective ways of recruiting hidden MSM populations in Chongqing which had a large population of active MSM who did not frequently visit MSM venues as compared with snowball method.

  5. Assessing representativeness of sampling methods for reaching men who have sex with men: a direct comparison of results obtained from convenience and probability samples.

    Science.gov (United States)

    Schwarcz, Sandra; Spindler, Hilary; Scheer, Susan; Valleroy, Linda; Lansky, Amy

    2007-07-01

    Convenience samples are used to determine HIV-related behaviors among men who have sex with men (MSM) without measuring the extent to which the results are representative of the broader MSM population. We compared results from a cross-sectional survey of MSM recruited from gay bars between June and October 2001 to a random digit dial telephone survey conducted between June 2002 and January 2003. The men in the probability sample were older, better educated, and had higher incomes than men in the convenience sample, the convenience sample enrolled more employed men and men of color. Substance use around the time of sex was higher in the convenience sample but other sexual behaviors were similar. HIV testing was common among men in both samples. Periodic validation, through comparison of data collected by different sampling methods, may be useful when relying on survey data for program and policy development.

  6. The Determination of Polyethylene Glycol in Untreated Urine Samples by High Performance Liquid Chromatography for Intestinal Permeability Studies

    DEFF Research Database (Denmark)

    Larsen, Elfinn; Pedersen, Walther Batsberg; Philipsen, E.

    1985-01-01

    Polyethylene glycol in urine samples has been investigated by high performance liquid chromatography. The molecular weights ranged from 634 to 1338. The urine samples were applied to the chromatographic system without any pre-treatment. For samples with a concentration of 0.2% polyethylene glycol...

  7. Grating scattering BRDF and imaging performances: A test survey performed in the frame of the flex mission

    Science.gov (United States)

    Harnisch, Bernd; Deep, Atul; Vink, Ramon; Coatantiec, Claude

    2017-11-01

    Key components in optical spectrometers are the gratings. Their influence on the overall infield straylight of the spectrometer depends not only on the technology used for grating fabrication but also on the potential existence of ghost images caused by irregularities of the grating constant. For the straylight analysis of spectrometer no general Bidirectional Reflectance Distribution Function (BRDF) model of gratings exist, as it does for optically smooth surfaces. These models are needed for the determination of spectrometer straylight background and for the calculation of spectrometer out of band rejection performances. Within the frame of the Fluorescence Earth Explorer mission (FLEX), gratings manufactured using different technologies have been investigated in terms of straylight background and imaging performance in the used diffraction order. The gratings which have been investigated cover a lithographically written grating, a volume Bragg grating, two holographic gratings and an off-the-shelf ruled grating. In this paper we present a survey of the measured bidirectional reflectance/transmittance distribution function and the determination of an equivalent surface micro-roughness of the gratings, describing the scattering of the grating around the diffraction order. This is specifically needed for the straylight modeling of the spectrometer.

  8. Authentic leadership, performance, and job satisfaction: the mediating role of empowerment.

    Science.gov (United States)

    Wong, Carol A; Laschinger, Heather K S

    2013-04-01

    To report a study conducted to test a model linking authentic leadership of managers with nurses' perceptions of structural empowerment, performance, and job satisfaction. Authentic leadership has been proposed as the root element of effective leadership needed to build healthier work environments because there is special attention to the development of empowering leader-follower relationships. Although the influence of leadership style and empowerment on job satisfaction is well documented, there are few studies examining the influence of authentic leadership on nurses' empowerment and work outcomes. A non-experimental, predictive survey. In 2008, a random sample of 600 Registered Nurses working in acute care hospitals across Ontario in Canada was surveyed. The final sample consisted of 280 (48% response rate) nurses. Variables were measured using the Authentic Leadership Questionnaire, Conditions of Work Effectiveness Questionnaire, Global Job Satisfaction Survey, and General Performance scale. The theoretical model was tested using structural equation modelling. The final model fit the data acceptably. Authentic leadership significantly and positively influenced staff nurses' structural empowerment, which in turn increased job satisfaction and self-rated performance. The results suggest that the more managers are seen as authentic, by emphasizing transparency, balanced processing, self-awareness and high ethical standards, the more nurses perceive they have access to workplace empowerment structures, are satisfied with their work, and report higher performance. © 2012 Blackwell Publishing Ltd.

  9. Public perceptions of key performance indicators of healthcare in Alberta, Canada.

    Science.gov (United States)

    Northcott, Herbert C; Harvey, Michael D

    2012-06-01

    To examine the relationship between public perceptions of key performance indicators assessing various aspects of the health-care system. Cross-sequential survey research. Annual telephone surveys of random samples of adult Albertans selected by random digit dialing and stratified according to age, sex and region (n = 4000 for each survey year). The survey questionnaires included single-item measures of key performance indicators to assess public perceptions of availability, accessibility, quality, outcome and satisfaction with healthcare. Cronbach's α and factor analysis were used to assess the relationship between key performance indicators focusing on the health-care system overall and on a recent interaction with the health-care system. The province of Alberta, Canada during the years 1996-2004. Four thousand adults randomly selected each survey year. Survey questions measuring public perceptions of healthcare availability, accessibility, quality, outcome and satisfaction with healthcare. Factor analysis identified two principal components with key performance indicators focusing on the health system overall loading most strongly on the first component and key performance indicators focusing on the most recent health-care encounter loading most strongly on the second component. Assessments of the quality of care most recently received, accessibility of that care and perceived outcome of care tended to be higher than the more general assessments of overall health system quality and accessibility. Assessments of specific health-care encounters and more general assessments of the overall health-care system, while related, nevertheless comprise separate dimensions for health-care evaluation.

  10. Analysis of business process maturity and organisational performance relations

    Directory of Open Access Journals (Sweden)

    Kalinowski T. Bartosz

    2016-12-01

    Full Text Available The paper aims to present results of the study on business process maturity in relation to organisational performance. A two-phase methodology, based on literature review and survey was used. The literature is a source of knowledge about business process maturity and organisational performance, whereas the research on process maturity vs organisational performance in Polish Enterprises provides findings based on 84 surveyed companies. The main areas of the research covered: identification and analysis of maturity related variables and identification of organisational performance perspectives and its relation to process maturity. The study shows that there is a significant positive relation between process maturity and organisational performance. Although there are research on such relation available, they are scarce and have some significant limitations in terms of research sample or the scope of maturity or organisational performance covered. This publication is part of a project funded by the National Science Centre awarded by decision number DEC-2011/01/D/HS4/04070.

  11. Performance test of SAUNA xenon mobile sampling system

    International Nuclear Information System (INIS)

    Hu Dan; Yang Bin; Yang Weigeng; Jia Huaimao; Wang Shilian; Li Qi; Zhao Yungang; Fan Yuanqing; Chen Zhanying; Chang Yinzhong; Liu Shujiang; Zhang Xinjun; Wang Jun

    2011-01-01

    In this article, the structure and basic functions of SAUNA noble gas xenon mobile sampling system are introduced. The sampling capability of this system is about 2.2 mL per day, as a result from a 684-h operation. The system can be transported to designated locations conveniently to collect xenon sample for routine or emergency environment monitoring. (authors)

  12. Survey of mammography practice in Croatia: Equipment performance, image quality and dose

    International Nuclear Information System (INIS)

    Faj, D.; Stimac, D.; Ivezic, Z.; Kasabasic, M.; Ivkovic, A.; Posedel, D.; Kubelka, D.; Ilakovac, V.; Brnic, Z.; Bjelac, O.C.

    2008-01-01

    A national audit of mammography equipment performance, image quality and dose has been conducted in Croatia. Film-processing parameters, optical density (OD), average glandular dose (AGD) to the standard breast, viewing conditions and image quality were examined using TOR(MAM) test object. Average film gradient ranged from 2.6 to 3.7, with a mean of 3.1. Tube voltage used for imaging of the standard 45 mm polymethylmethacrylate phantom ranged from 24 to 34 kV, and OD ranged from 0.75 to 1.94 with a mean of 1.26. AGD to the standard breast ranged from 0.4 to 2.3 mGy with a mean of 1.1 mGy. Besides clinical conditions, the authors have imaged the standard phantom in the referent conditions with 28 kV and OD as close as possible to 1.5. Then, AGD ranged from 0.5 to 2.6 mGy with a mean of 1.3 mGy. Image viewing conditions were generally unsatisfying with ambient light up to 500 lx and most of the viewing boxes with luminance between 1000 and 2000 cd per m 2 . TOR(MAM) scoring of images taken in clinical and referent conditions was done by local radiologists in local image viewing conditions and by the referent radiologist in good image viewing conditions. Importance of OD and image viewing conditions for diagnostic information were analysed. The survey showed that the main problem in Croatia is the lack of written quality assurance/quality control (QA/QC) procedures. Consequently, equipment performance, image quality and dose are unstable and activities to improve image quality or to reduce the dose are not evidence-based. This survey also had an educational purpose, introducing in Croatia the QC based on European Commission Guidelines. (authors)

  13. Pilot pulsar surveys with LOFAR

    NARCIS (Netherlands)

    Coenen, T.

    2013-01-01

    We are performing two complementary pilot pulsar surveys as part of LOFAR commissioning. The LOFAR Pilot Pulsar Survey (LPPS) is a shallow all-sky survey using an incoherent combination of LOFAR stations. The LOFAR Tied-Array Survey (LOTAS) is a deeper pilot survey using 19 simultaneous tied-array

  14. Mean consumption, poverty and inequality in rural India in the 60th round of the National Sample Survey.

    Science.gov (United States)

    Jha, Raghbendra; Gaiha, Raghav; Sharma, Anurag

    2010-01-01

    This article reports on mean consumption, poverty (all three FGT measures) and inequality during 2004 for rural India using National Sample Survey (NSS) data for the 60th Round. Mean consumption at the national level is much higher than the poverty line. However, the Gini coefficient is higher than in recent earlier rounds. The headcount ratio is 22.9 per cent. Mean consumption, all three measures of poverty and the Gini coefficient are computed at the level of 20 states and 63 agro-climatic zones in these 20 states. It is surmised that despite impressive growth rates deprivation is pervasive, pockets of severe poverty persist, and inequality is rampant.

  15. The SOAR Gravitational Arc Survey – I. Survey overview and photometric catalogues

    Energy Technology Data Exchange (ETDEWEB)

    Furlanetto, Cristina; Santiago, Basílio X.; Makler, Martín; Cypriano, Eduardo S.; Caminha, Gabriel B.; Pereira, Maria E. S.; Neto, Angelo Fausti; Estrada, Juan; Lin, Huan; Hao, Jiangang; McKay, Timothy A.; da Costa, Luiz N.; Maia, Marcio A. G.

    2013-04-11

    We present the first results of the SOAR (Southern Astrophysical Research) Gravitational Arc Survey (SOGRAS). The survey imaged 47 clusters in two redshift intervals centered at $z=0.27$ and $z=0.55$, targeting the richest clusters in each interval. Images were obtained in the $g'$, $r'$ and $i'$ bands using the SOAR Optical Imager (SOI), with a median seeing of 0.83, 0.76 and 0.71 arcsec, respectively, in these filters. Most of the survey clusters are located within the Sloan Digital Sky Survey (SDSS) Stripe 82 region and all of them are in the SDSS footprint. Photometric calibration was therefore performed using SDSS stars located in our SOI fields. We reached for galaxies in all fields the detection limits of $g \\sim 23.5$, $r \\sim 23$ and $i \\sim 22.5$ for a signal-to-noise ratio (S/N) = 3. As a by-product of the image processing, we generated a source catalogue with 19760 entries, the vast majority of which are galaxies, where we list their positions, magnitudes and shape parameters. We compared our galaxy shape measurements to those of local galaxies and concluded that they were not strongly affected by seeing. From the catalogue data, we are able to identify a red sequence of galaxies in most clusters in the lower $z$ range. We found 16 gravitational arc candidates around 8 clusters in our sample. They tend to be bluer than the central galaxies in the lensing cluster. A preliminary analysis indicates that $\\sim 10%$ of the clusters have arcs around them, with a possible indication of a larger efficiency associated to the high-$z$ systems when compared to the low-$z$ ones. Deeper follow-up images with Gemini strengthen the case for the strong lensing nature of the candidates found in this survey.

  16. Roof Moisture Surveys: Current State Of The Technology

    Science.gov (United States)

    Tobiasson, Wayne

    1983-03-01

    Moisture is the big enemy of compact roofing systems. Non-destructive nuclear, capacitance and infrared methods can all find wet insulation in such roofs but a few core samples are needed for verification. Nuclear and capacitance surveys generate quantitative results at grid points but examine only a small portion of the roof. Quantitative results are not usually provided by infrared scanners but they can rapidly examine every square inch of the roof. Being able to find wet areas when they are small is an important advantage. Prices vary with the scope of the investigation. For a particular scope, the three techniques are often cost-competitive. The limitations of each technique are related to the people involved as well as the equipment. When the right people are involved, non-destructive surveys are a very effective method for improving the long-term performance and reducing the life-cycle costs of roofing systems. Plans for the maintenance, repair or replacement of a roof should include a roof moisture survey.

  17. Effect of the Target Motion Sampling temperature treatment method on the statistics and performance

    International Nuclear Information System (INIS)

    Viitanen, Tuomas; Leppänen, Jaakko

    2015-01-01

    Highlights: • Use of the Target Motion Sampling (TMS) method with collision estimators is studied. • The expected values of the estimators agree with NJOY-based reference. • In most practical cases also the variances of the estimators are unaffected by TMS. • Transport calculation slow-down due to TMS dominates the impact on figures-of-merit. - Abstract: Target Motion Sampling (TMS) is a stochastic on-the-fly temperature treatment technique that is being developed as a part of the Monte Carlo reactor physics code Serpent. The method provides for modeling of arbitrary temperatures in continuous-energy Monte Carlo tracking routines with only one set of cross sections stored in the computer memory. Previously, only the performance of the TMS method in terms of CPU time per transported neutron has been discussed. Since the effective cross sections are not calculated at any point of a transport simulation with TMS, reaction rate estimators must be scored using sampled cross sections, which is expected to increase the variances and, consequently, to decrease the figures-of-merit. This paper examines the effects of the TMS on the statistics and performance in practical calculations involving reaction rate estimation with collision estimators. Against all expectations it turned out that the usage of sampled response values has no practical effect on the performance of reaction rate estimators when using TMS with elevated basis cross section temperatures (EBT), i.e. the usual way. With 0 Kelvin cross sections a significant increase in the variances of capture rate estimators was observed right below the energy region of unresolved resonances, but at these energies the figures-of-merit could be increased using a simple resampling technique to decrease the variances of the responses. It was, however, noticed that the usage of the TMS method increases the statistical deviances of all estimators, including the flux estimator, by tens of percents in the vicinity of very

  18. The performance effect of the Lean package – a survey study using a structural equation model

    DEFF Research Database (Denmark)

    Kristensen, Thomas Borup; Israelsen, Poul

    Purpose - Our aim is to test and validate a system-wide approach using mediating relationships in a structural equation model in order to understand how the practices of Lean affect performance. Design/methodology/approach – A cross-sectional survey with 200 responding companies indicating...... that they use Lean. This is analyzed in a structural quation model setting. Findings - Previous quantitative research has shown mixed results for the performance of Lean because they have not addressed the system-wide mediating relations between Lean practices. We find that Companies using a system...... practices in creating improved performance. Hence, we develop a new systemwide structural equation model approach with multiple mediations, and we validate this with substantial tests....

  19. Performance of the lot quality assurance sampling method compared to surveillance for identifying inadequately-performing areas in Matlab, Bangladesh.

    Science.gov (United States)

    Bhuiya, Abbas; Hanifi, S M A; Roy, Nikhil; Streatfield, P Kim

    2007-03-01

    This paper compared the performance of the lot quality assurance sampling (LQAS) method in identifying inadequately-performing health work-areas with that of using health and demographic surveillance system (HDSS) data and examined the feasibility of applying the method by field-level programme supervisors. The study was carried out in Matlab, the field site of ICDDR,B, where a HDSS has been in place for over 30 years. The LQAS method was applied in 57 work-areas of community health workers in ICDDR,B-served areas in Matlab during July-September 2002. The performance of the LQAS method in identifying work-areas with adequate and inadequate coverage of various health services was compared with those of the HDSS. The health service-coverage indicators included coverage of DPT, measles, BCG vaccination, and contraceptive use. It was observed that the difference in the proportion of work-areas identified to be inadequately performing using the LQAS method with less than 30 respondents, and the HDSS was not statistically significant. The consistency between the LQAS method and the HDSS in identifying work-areas was greater for adequately-performing areas than inadequately-performing areas. It was also observed that the field managers could be trained to apply the LQAS method in monitoring their performance in reaching the target population.

  20. Utility FGD Survey, January--December 1989. Volume 2, Design performance data for operating FGD systems, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)

    1992-03-01

    The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.