WorldWideScience

Sample records for sample accurately represents

  1. On the representativeness of behavior observation samples in classrooms.

    Science.gov (United States)

    Tiger, Jeffrey H; Miller, Sarah J; Mevers, Joanna Lomas; Mintz, Joslyn Cynkus; Scheithauer, Mindy C; Alvarez, Jessica

    2013-01-01

    School consultants who rely on direct observation typically conduct observational samples (e.g., 1 30-min observation per day) with the hopes that the sample is representative of performance during the remainder of the day, but the representativeness of these samples is unclear. In the current study, we recorded the problem behavior of 3 referred students for 4 consecutive school days between 9:30 a.m. and 2:30 p.m. using duration recording in consecutive 10-min sessions. We then culled 10-min, 20-min, 30-min, and 60-min observations from the complete record and compared these observations to the true daily mean to assess their accuracy (i.e., how well individual observations represented the daily occurrence of target behaviors). The results indicated that when behavior occurred with low variability, the majority of brief observations were representative of the overall levels; however, when behavior occurred with greater variability, even 60-min observations did not accurately capture the true levels of behavior. © Society for the Experimental Analysis of Behavior.

  2. Obtaining Samples Representative of Contaminant Distribution in an Aquifer

    International Nuclear Information System (INIS)

    Schalla, Ronald; Spane, Frank A.; Narbutovskih, Susan M.; Conley, Scott F.; Webber, William D.

    2002-01-01

    Historically, groundwater samples collected from monitoring wells have been assumed to provide average indications of contaminant concentrations within the aquifer over the well-screen interval. In-well flow circulation, heterogeneity in the surrounding aquifer, and the sampling method utilized, however, can significantly impact the representativeness of samples as contaminant indicators of actual conditions within the surrounding aquifer. This paper identifies the need and approaches essential for providing cost-effective and technically meaningful groundwater-monitoring results. Proper design of the well screen interval is critical. An accurate understanding of ambient (non-pumping) flow conditions within the monitoring well is essential for determining the contaminant distribution within the aquifer. The ambient in-well flow velocity, flow direction and volumetric flux rate are key to this understanding. Not only do the ambient flow conditions need to be identified for preferential flow zones, but also the probable changes that will be imposed under dynamic conditions that occur during groundwater sampling. Once the in-well flow conditions are understood, effective sampling can be conducted to obtain representative samples for specific depth zones or zones of interest. The question of sample representativeness has become an important issue as waste minimization techniques such as low flow purging and sampling are implemented to combat the increasing cost of well purging and sampling at many hazardous waste sites. Several technical approaches (e.g., well tracer techniques and flowmeter surveys) can be used to determine in-well flow conditions, and these are discussed with respect to both their usefulness and limitations. Proper fluid extraction methods using minimal, (low) volume and no purge sampling methods that are used to obtain representative samples of aquifer conditions are presented

  3. Verification of Representative Sampling in RI waste

    International Nuclear Information System (INIS)

    Ahn, Hong Joo; Song, Byung Cheul; Sohn, Se Cheul; Song, Kyu Seok; Jee, Kwang Yong; Choi, Kwang Seop

    2009-01-01

    For evaluating the radionuclide inventories for RI wastes, representative sampling is one of the most important parts in the process of radiochemical assay. Sampling to characterized RI waste conditions typically has been based on judgment or convenience sampling of individual or groups. However, it is difficult to get a sample representatively among the numerous drums. In addition, RI waste drums might be classified into heterogeneous wastes because they have a content of cotton, glass, vinyl, gloves, etc. In order to get the representative samples, the sample to be analyzed must be collected from selected every drum. Considering the expense and time of analysis, however, the number of sample has to be minimized. In this study, RI waste drums were classified by the various conditions of the half-life, surface dose, acceptance date, waste form, generator, etc. A sample for radiochemical assay was obtained through mixing samples of each drum. The sample has to be prepared for radiochemical assay and although the sample should be reasonably uniform, it is rare that a completely homogeneous material is received. Every sample is shredded by a 1 ∼ 2 cm 2 diameter and a representative aliquot taken for the required analysis. For verification of representative sampling, classified every group is tested for evaluation of 'selection of representative drum in a group' and 'representative sampling in a drum'

  4. Sample representativeness verification of the FADN CZ farm business sample

    Directory of Open Access Journals (Sweden)

    Marie Prášilová

    2011-01-01

    Full Text Available Sample representativeness verification is one of the key stages of statistical work. After having joined the European Union the Czech Republic joined also the Farm Accountancy Data Network system of the Union. This is a sample of bodies and companies doing business in agriculture. Detailed production and economic data on the results of farming business are collected from that sample annually and results for the entire population of the country´s farms are then estimated and assessed. It is important hence, that the sample be representative. Representativeness is to be assessed as to the number of farms included in the survey and also as to the degree of accordance of the measures and indices as related to the population. The paper deals with the special statistical techniques and methods of the FADN CZ sample representativeness verification including the necessary sample size statement procedure. The Czech farm population data have been obtained from the Czech Statistical Office data bank.

  5. Representative Sampling for reliable data analysis

    DEFF Research Database (Denmark)

    Petersen, Lars; Esbensen, Kim Harry

    2005-01-01

    regime in order to secure the necessary reliability of: samples (which must be representative, from the primary sampling onwards), analysis (which will not mean anything outside the miniscule analytical volume without representativity ruling all mass reductions involved, also in the laboratory) and data...

  6. Representative process sampling - in practice

    DEFF Research Database (Denmark)

    Esbensen, Kim; Friis-Pedersen, Hans Henrik; Julius, Lars Petersen

    2007-01-01

    Didactic data sets representing a range of real-world processes are used to illustrate "how to do" representative process sampling and process characterisation. The selected process data lead to diverse variogram expressions with different systematics (no range vs. important ranges; trends and....../or periodicity; different nugget effects and process variations ranging from less than one lag to full variogram lag). Variogram data analysis leads to a fundamental decomposition into 0-D sampling vs. 1-D process variances, based on the three principal variogram parameters: range, sill and nugget effect...

  7. Experimental verification of air flow rate measurement for representative isokinetic air sampling in ventilation stacks

    International Nuclear Information System (INIS)

    Okruhlica, P.; Mrtvy, M.; Kopecky, Z.

    2009-01-01

    Nuclear facilities are obliged to monitor their discharge's influence on environment. Main monitored factions in NPP's ventilation stacks are usually noble gasses, particulates and iodine. These factions are monitored in air sampled from ventilation stack by means of sampling rosette and bypass followed with on-line measuring monitors and balance sampling devices with laboratory evaluations. Correct air flow rate measurement and representative iso-kinetic air sampling system is essential for physical correct and metrological accurate evaluation of discharge influence on environment. Pairs of measuring sensors (Anemometer, pressure gauge, thermometer and humidity meter) are symmetrically placed in horizontal projection of stack on positions based on measured air flow velocity distribution characteristic, Analogically diameter of sampling rosette nozzles and their placement in the middle of 6 - 7 annuluses are calculated for assurance of representative iso-kinetic sampling. (authors)

  8. Experimental verification of air flow rate measurement for representative isokinetic air sampling in ventilation stacks

    International Nuclear Information System (INIS)

    Okruhlica, P.; Mrtvy, M.; Kopecky, Z.

    2008-01-01

    Nuclear facilities are obliged to monitor their discharge's influence on environment. Main monitored factions in NPP's ventilation stacks are usually noble gasses, particulates and iodine. These factions are monitored in air sampled from ventilation stack by means of sampling rosette and bypass followed with on-line measuring monitors and balance sampling devices with laboratory evaluations. Correct air flow rate measurement and representative iso-kinetic air sampling system is essential for physical correct and metrological accurate evaluation of discharge influence on environment. Pairs of measuring sensors (Anemometer, pressure gauge, thermometer and humidity meter) are symmetrically placed in horizontal projection of stack on positions based on measured air flow velocity distribution characteristic, Analogically diameter of sampling rosette nozzles and their placement in the middle of 6- 7 annuluses are calculated for assurance of representative iso-kinetic sampling. (authors)

  9. γ-Ray spectrometry of radon in water and the role of radon to representatively sample aquifers

    International Nuclear Information System (INIS)

    Talha, S.A.; Lindsay, R.; Newman, R.T.; Meijer, R.J. de; Maleka, P.P.; Hlatshwayo, I.N.; Mlwilo, N.A.; Mohanty, A.K.

    2008-01-01

    Measurement of radon in water by γ-ray spectrometry using a HPGe detector has been investigated to determine aquifer characteristics. The radon activity concentration is determined by taking the weighted average of the concentrations derived from γ-ray lines associated with 214 Pb and 214 Bi decay. The role of accurate radon data to representatively sample aquifers was also investigated by studying a semi-cased borehole. A simplified physical model describing the change of radon concentration with the pumping time, reproduces the data and predicts the time for representative sampling of the aquifer

  10. Archived neonatal dried blood spot samples can be used for accurate whole genome and exome-targeted next-generation sequencing

    DEFF Research Database (Denmark)

    Hollegaard, Mads Vilhelm; Grauholm, Jonas; Nielsen, Ronni

    2013-01-01

    Dried blood spot samples (DBSS) have been collected and stored for decades as part of newborn screening programmes worldwide. Representing almost an entire population under a certain age and collected with virtually no bias, the Newborn Screening Biobanks are of immense value in medical studies......, for example, to examine the genetics of various disorders. We have previously demonstrated that DNA extracted from a fraction (2×3.2mm discs) of an archived DBSS can be whole genome amplified (wgaDNA) and used for accurate array genotyping. However, until now, it has been uncertain whether wgaDNA from DBSS...... can be used for accurate whole genome sequencing (WGS) and exome sequencing (WES). This study examined two individuals represented by three different types of samples each: whole-blood (reference samples), 3-year-old DBSS spotted with reference material (refDBSS), and 27- to 29-year-old archived...

  11. Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples

    Energy Technology Data Exchange (ETDEWEB)

    Shine, E. P.; Poirier, M. R.

    2013-10-29

    Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and

  12. Defining And Characterizing Sample Representativeness For DWPF Melter Feed Samples

    International Nuclear Information System (INIS)

    Shine, E. P.; Poirier, M. R.

    2013-01-01

    Representative sampling is important throughout the Defense Waste Processing Facility (DWPF) process, and the demonstrated success of the DWPF process to achieve glass product quality over the past two decades is a direct result of the quality of information obtained from the process. The objective of this report was to present sampling methods that the Savannah River Site (SRS) used to qualify waste being dispositioned at the DWPF. The goal was to emphasize the methodology, not a list of outcomes from those studies. This methodology includes proven methods for taking representative samples, the use of controlled analytical methods, and data interpretation and reporting that considers the uncertainty of all error sources. Numerous sampling studies were conducted during the development of the DWPF process and still continue to be performed in order to evaluate options for process improvement. Study designs were based on use of statistical tools applicable to the determination of uncertainties associated with the data needs. Successful designs are apt to be repeated, so this report chose only to include prototypic case studies that typify the characteristics of frequently used designs. Case studies have been presented for studying in-tank homogeneity, evaluating the suitability of sampler systems, determining factors that affect mixing and sampling, comparing the final waste glass product chemical composition and durability to that of the glass pour stream sample and other samples from process vessels, and assessing the uniformity of the chemical composition in the waste glass product. Many of these studies efficiently addressed more than one of these areas of concern associated with demonstrating sample representativeness and provide examples of statistical tools in use for DWPF. The time when many of these designs were implemented was in an age when the sampling ideas of Pierre Gy were not as widespread as they are today. Nonetheless, the engineers and

  13. Towards Representative Metallurgical Sampling and Gold Recovery Testwork Programmes

    Directory of Open Access Journals (Sweden)

    Simon C. Dominy

    2018-05-01

    Full Text Available When developing a process flowsheet, the risks in achieving positive financial outcomes are minimised by ensuring representative metallurgical samples and high quality testwork. The quality and type of samples used are as important as the testwork itself. The key characteristic required of any set of samples is that they represent a given domain and quantify its variability. There are those who think that stating a sample(s is representative makes it representative without justification. There is a need to consider both (1 in-situ and (2 testwork sub-sample representativity. Early ore/waste characterisation and domain definition are required, so that sampling and testwork protocols can be designed to suit the style of mineralisation in question. The Theory of Sampling (TOS provides an insight into the causes and magnitude of errors that may occur during the sampling of particulate materials (e.g., broken rock and is wholly applicable to metallurgical sampling. Quality assurance/quality control (QAQC is critical throughout all programmes. Metallurgical sampling and testwork should be fully integrated into geometallurgical studies. Traditional metallurgical testwork is critical for plant design and is an inherent part of geometallurgy. In a geometallurgical study, multiple spatially distributed small-scale tests are used as proxies for process parameters. These will be validated against traditional testwork results. This paper focusses on sampling and testwork for gold recovery determination. It aims to provide the reader with the background to move towards the design, implementation and reporting of representative and fit-for-purpose sampling and testwork programmes. While the paper does not intend to provide a definitive commentary, it critically assesses the hard-rock sampling methods used and their optimal collection and preparation. The need for representative sampling and quality testwork to avoid financial and intangible losses is

  14. Accurate EPR radiosensitivity calibration using small sample masses

    Science.gov (United States)

    Hayes, R. B.; Haskell, E. H.; Barrus, J. K.; Kenner, G. H.; Romanyukha, A. A.

    2000-03-01

    We demonstrate a procedure in retrospective EPR dosimetry which allows for virtually nondestructive sample evaluation in terms of sample irradiations. For this procedure to work, it is shown that corrections must be made for cavity response characteristics when using variable mass samples. Likewise, methods are employed to correct for empty tube signals, sample anisotropy and frequency drift while considering the effects of dose distribution optimization. A demonstration of the method's utility is given by comparing sample portions evaluated using both the described methodology and standard full sample additive dose techniques. The samples used in this study are tooth enamel from teeth removed during routine dental care. We show that by making all the recommended corrections, very small masses can be both accurately measured and correlated with measurements of other samples. Some issues relating to dose distribution optimization are also addressed.

  15. Accurate EPR radiosensitivity calibration using small sample masses

    International Nuclear Information System (INIS)

    Hayes, R.B.; Haskell, E.H.; Barrus, J.K.; Kenner, G.H.; Romanyukha, A.A.

    2000-01-01

    We demonstrate a procedure in retrospective EPR dosimetry which allows for virtually nondestructive sample evaluation in terms of sample irradiations. For this procedure to work, it is shown that corrections must be made for cavity response characteristics when using variable mass samples. Likewise, methods are employed to correct for empty tube signals, sample anisotropy and frequency drift while considering the effects of dose distribution optimization. A demonstration of the method's utility is given by comparing sample portions evaluated using both the described methodology and standard full sample additive dose techniques. The samples used in this study are tooth enamel from teeth removed during routine dental care. We show that by making all the recommended corrections, very small masses can be both accurately measured and correlated with measurements of other samples. Some issues relating to dose distribution optimization are also addressed

  16. Sample size estimation and sampling techniques for selecting a representative sample

    Directory of Open Access Journals (Sweden)

    Aamir Omair

    2014-01-01

    Full Text Available Introduction: The purpose of this article is to provide a general understanding of the concepts of sampling as applied to health-related research. Sample Size Estimation: It is important to select a representative sample in quantitative research in order to be able to generalize the results to the target population. The sample should be of the required sample size and must be selected using an appropriate probability sampling technique. There are many hidden biases which can adversely affect the outcome of the study. Important factors to consider for estimating the sample size include the size of the study population, confidence level, expected proportion of the outcome variable (for categorical variables/standard deviation of the outcome variable (for numerical variables, and the required precision (margin of accuracy from the study. The more the precision required, the greater is the required sample size. Sampling Techniques: The probability sampling techniques applied for health related research include simple random sampling, systematic random sampling, stratified random sampling, cluster sampling, and multistage sampling. These are more recommended than the nonprobability sampling techniques, because the results of the study can be generalized to the target population.

  17. Accurate Sample Time Reconstruction of Inertial FIFO Data

    Directory of Open Access Journals (Sweden)

    Sebastian Stieber

    2017-12-01

    Full Text Available In the context of modern cyber-physical systems, the accuracy of underlying sensor data plays an increasingly important role in sensor data fusion and feature extraction. The raw events of multiple sensors have to be aligned in time to enable high quality sensor fusion results. However, the growing number of simultaneously connected sensor devices make the energy saving data acquisition and processing more and more difficult. Hence, most of the modern sensors offer a first-in-first-out (FIFO interface to store multiple data samples and to relax timing constraints, when handling multiple sensor devices. However, using the FIFO interface increases the negative influence of individual clock drifts—introduced by fabrication inaccuracies, temperature changes and wear-out effects—onto the sampling data reconstruction. Furthermore, additional timing offset errors due to communication and software latencies increases with a growing number of sensor devices. In this article, we present an approach for an accurate sample time reconstruction independent of the actual clock drift with the help of an internal sensor timer. Such timers are already available in modern sensors, manufactured in micro-electromechanical systems (MEMS technology. The presented approach focuses on calculating accurate time stamps using the sensor FIFO interface in a forward-only processing manner as a robust and energy saving solution. The proposed algorithm is able to lower the overall standard deviation of reconstructed sampling periods below 40 μ s, while run-time savings of up to 42% are achieved, compared to single sample acquisition.

  18. 40 CFR Appendix I to Part 261 - Representative Sampling Methods

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Representative Sampling Methods I...—Representative Sampling Methods The methods and equipment used for sampling waste materials will vary with the form and consistency of the waste materials to be sampled. Samples collected using the sampling...

  19. Accurate determination of rates from non-uniformly sampled relaxation data

    Energy Technology Data Exchange (ETDEWEB)

    Stetz, Matthew A.; Wand, A. Joshua, E-mail: wand@upenn.edu [University of Pennsylvania Perelman School of Medicine, Johnson Research Foundation and Department of Biochemistry and Biophysics (United States)

    2016-08-15

    The application of non-uniform sampling (NUS) to relaxation experiments traditionally used to characterize the fast internal motion of proteins is quantitatively examined. Experimentally acquired Poisson-gap sampled data reconstructed with iterative soft thresholding are compared to regular sequentially sampled (RSS) data. Using ubiquitin as a model system, it is shown that 25 % sampling is sufficient for the determination of quantitatively accurate relaxation rates. When the sampling density is fixed at 25 %, the accuracy of rates is shown to increase sharply with the total number of sampled points until eventually converging near the inherent reproducibility of the experiment. Perhaps contrary to some expectations, it is found that accurate peak height reconstruction is not required for the determination of accurate rates. Instead, inaccuracies in rates arise from inconsistencies in reconstruction across the relaxation series that primarily manifest as a non-linearity in the recovered peak height. This indicates that the performance of an NUS relaxation experiment cannot be predicted from comparison of peak heights using a single RSS reference spectrum. The generality of these findings was assessed using three alternative reconstruction algorithms, eight different relaxation measurements, and three additional proteins that exhibit varying degrees of spectral complexity. From these data, it is revealed that non-linearity in peak height reconstruction across the relaxation series is strongly correlated with errors in NUS-derived relaxation rates. Importantly, it is shown that this correlation can be exploited to reliably predict the performance of an NUS-relaxation experiment by using three or more RSS reference planes from the relaxation series. The RSS reference time points can also serve to provide estimates of the uncertainty of the sampled intensity, which for a typical relaxation times series incurs no penalty in total acquisition time.

  20. Recruitment of representative samples for low incidence cancer populations: Do registries deliver?

    Directory of Open Access Journals (Sweden)

    Sanson-Fisher Rob

    2011-01-01

    Full Text Available Abstract Background Recruiting large and representative samples of adolescent and young adult (AYA cancer survivors is important for gaining accurate data regarding the prevalence of unmet needs in this population. This study aimed to describe recruitment rates for AYAs recruited through a cancer registry with particular focus on: active clinician consent protocols, reasons for clinicians not providing consent and the representativeness of the final sample. Methods Adolescents and young adults aged 14 to19 years inclusive and listed on the cancer registry from January 1 2002 to December 31 2007 were identified. An active clinician consent protocol was used whereby the registry sent a letter to AYAs primary treating clinicians requesting permission to contact the survivors. The registry then sent survivors who received their clinician's consent a letter seeking permission to forward their contact details to the research team. Consenting AYAs were sent a questionnaire which assessed their unmet needs. Results The overall consent rate for AYAs identified as eligible by the registry was 7.8%. Of the 411 potentially eligible survivors identified, just over half (n = 232, 56% received their clinician's consent to be contacted. Of those 232 AYAs, 65% were unable to be contacted. Only 18 AYAs (7.8% refused permission for their contact details to be passed on to the research team. Of the 64 young people who agreed to be contacted, 50% (n = 32 completed the questionnaire. Conclusions Cancer registries which employ active clinician consent protocols may not be appropriate for recruiting large, representative samples of AYAs diagnosed with cancer. Given that AYA cancer survivors are highly mobile, alternative methods such as treatment centre and clinic based recruitment may need to be considered.

  1. Representative mass reduction in sampling

    DEFF Research Database (Denmark)

    Petersen, Lars; Esbensen, Harry Kim; Dahl, Casper Kierulf

    2004-01-01

    We here present a comprehensive survey of current mass reduction principles and hardware available in the current market. We conduct a rigorous comparison study of the performance of 17 field and/or laboratory instruments or methods which are quantitatively characterized (and ranked) for accuracy...... dividers, the Boerner Divider, the ??spoon method??, alternate/fractional shoveling and grab sampling. Only devices based on riffle splitting principles (static or rotational) passes the ultimate representativity test (with minor, but significant relative differences). Grab sampling, the overwhelmingly...... most often used mass reduction method, performs appallingly?its use must be discontinued (with the singular exception for completely homogenized fine powders). Only proper mass reduction (i.e. carried out in complete compliance with all appropriate design principles, maintenance and cleaning rules) can...

  2. Sampling designs matching species biology produce accurate and affordable abundance indices

    Directory of Open Access Journals (Sweden)

    Grant Harris

    2013-12-01

    Full Text Available Wildlife biologists often use grid-based designs to sample animals and generate abundance estimates. Although sampling in grids is theoretically sound, in application, the method can be logistically difficult and expensive when sampling elusive species inhabiting extensive areas. These factors make it challenging to sample animals and meet the statistical assumption of all individuals having an equal probability of capture. Violating this assumption biases results. Does an alternative exist? Perhaps by sampling only where resources attract animals (i.e., targeted sampling, it would provide accurate abundance estimates more efficiently and affordably. However, biases from this approach would also arise if individuals have an unequal probability of capture, especially if some failed to visit the sampling area. Since most biological programs are resource limited, and acquiring abundance data drives many conservation and management applications, it becomes imperative to identify economical and informative sampling designs. Therefore, we evaluated abundance estimates generated from grid and targeted sampling designs using simulations based on geographic positioning system (GPS data from 42 Alaskan brown bears (Ursus arctos. Migratory salmon drew brown bears from the wider landscape, concentrating them at anadromous streams. This provided a scenario for testing the targeted approach. Grid and targeted sampling varied by trap amount, location (traps placed randomly, systematically or by expert opinion, and traps stationary or moved between capture sessions. We began by identifying when to sample, and if bears had equal probability of capture. We compared abundance estimates against seven criteria: bias, precision, accuracy, effort, plus encounter rates, and probabilities of capture and recapture. One grid (49 km2 cells and one targeted configuration provided the most accurate results. Both placed traps by expert opinion and moved traps between capture

  3. Sampling designs matching species biology produce accurate and affordable abundance indices.

    Science.gov (United States)

    Harris, Grant; Farley, Sean; Russell, Gareth J; Butler, Matthew J; Selinger, Jeff

    2013-01-01

    Wildlife biologists often use grid-based designs to sample animals and generate abundance estimates. Although sampling in grids is theoretically sound, in application, the method can be logistically difficult and expensive when sampling elusive species inhabiting extensive areas. These factors make it challenging to sample animals and meet the statistical assumption of all individuals having an equal probability of capture. Violating this assumption biases results. Does an alternative exist? Perhaps by sampling only where resources attract animals (i.e., targeted sampling), it would provide accurate abundance estimates more efficiently and affordably. However, biases from this approach would also arise if individuals have an unequal probability of capture, especially if some failed to visit the sampling area. Since most biological programs are resource limited, and acquiring abundance data drives many conservation and management applications, it becomes imperative to identify economical and informative sampling designs. Therefore, we evaluated abundance estimates generated from grid and targeted sampling designs using simulations based on geographic positioning system (GPS) data from 42 Alaskan brown bears (Ursus arctos). Migratory salmon drew brown bears from the wider landscape, concentrating them at anadromous streams. This provided a scenario for testing the targeted approach. Grid and targeted sampling varied by trap amount, location (traps placed randomly, systematically or by expert opinion), and traps stationary or moved between capture sessions. We began by identifying when to sample, and if bears had equal probability of capture. We compared abundance estimates against seven criteria: bias, precision, accuracy, effort, plus encounter rates, and probabilities of capture and recapture. One grid (49 km(2) cells) and one targeted configuration provided the most accurate results. Both placed traps by expert opinion and moved traps between capture sessions

  4. Sampling designs matching species biology produce accurate and affordable abundance indices

    Science.gov (United States)

    Farley, Sean; Russell, Gareth J.; Butler, Matthew J.; Selinger, Jeff

    2013-01-01

    Wildlife biologists often use grid-based designs to sample animals and generate abundance estimates. Although sampling in grids is theoretically sound, in application, the method can be logistically difficult and expensive when sampling elusive species inhabiting extensive areas. These factors make it challenging to sample animals and meet the statistical assumption of all individuals having an equal probability of capture. Violating this assumption biases results. Does an alternative exist? Perhaps by sampling only where resources attract animals (i.e., targeted sampling), it would provide accurate abundance estimates more efficiently and affordably. However, biases from this approach would also arise if individuals have an unequal probability of capture, especially if some failed to visit the sampling area. Since most biological programs are resource limited, and acquiring abundance data drives many conservation and management applications, it becomes imperative to identify economical and informative sampling designs. Therefore, we evaluated abundance estimates generated from grid and targeted sampling designs using simulations based on geographic positioning system (GPS) data from 42 Alaskan brown bears (Ursus arctos). Migratory salmon drew brown bears from the wider landscape, concentrating them at anadromous streams. This provided a scenario for testing the targeted approach. Grid and targeted sampling varied by trap amount, location (traps placed randomly, systematically or by expert opinion), and traps stationary or moved between capture sessions. We began by identifying when to sample, and if bears had equal probability of capture. We compared abundance estimates against seven criteria: bias, precision, accuracy, effort, plus encounter rates, and probabilities of capture and recapture. One grid (49 km2 cells) and one targeted configuration provided the most accurate results. Both placed traps by expert opinion and moved traps between capture sessions, which

  5. Testing a groundwater sampling tool: Are the samples representative?

    International Nuclear Information System (INIS)

    Kaback, D.S.; Bergren, C.L.; Carlson, C.A.; Carlson, C.L.

    1989-01-01

    A ground water sampling tool, the HydroPunch trademark, was tested at the Department of Energy's Savannah River Site in South Carolina to determine if representative ground water samples could be obtained without installing monitoring wells. Chemical analyses of ground water samples collected with the HydroPunch trademark from various depths within a borehole were compared with chemical analyses of ground water from nearby monitoring wells. The site selected for the test was in the vicinity of a large coal storage pile and a coal pile runoff basin that was constructed to collect the runoff from the coal storage pile. Existing monitoring wells in the area indicate the presence of a ground water contaminant plume that: (1) contains elevated concentrations of trace metals; (2) has an extremely low pH; and (3) contains elevated concentrations of major cations and anions. Ground water samples collected with the HydroPunch trademark provide in excellent estimate of ground water quality at discrete depths. Groundwater chemical data collected from various depths using the HydroPunch trademark can be averaged to simulate what a screen zone in a monitoring well would sample. The averaged depth-discrete data compared favorably with the data obtained from the nearby monitoring wells

  6. A hybrid solution using computational prediction and measured data to accurately determine process corrections with reduced overlay sampling

    Science.gov (United States)

    Noyes, Ben F.; Mokaberi, Babak; Mandoy, Ram; Pate, Alex; Huijgen, Ralph; McBurney, Mike; Chen, Owen

    2017-03-01

    Reducing overlay error via an accurate APC feedback system is one of the main challenges in high volume production of the current and future nodes in the semiconductor industry. The overlay feedback system directly affects the number of dies meeting overlay specification and the number of layers requiring dedicated exposure tools through the fabrication flow. Increasing the former number and reducing the latter number is beneficial for the overall efficiency and yield of the fabrication process. An overlay feedback system requires accurate determination of the overlay error, or fingerprint, on exposed wafers in order to determine corrections to be automatically and dynamically applied to the exposure of future wafers. Since current and future nodes require correction per exposure (CPE), the resolution of the overlay fingerprint must be high enough to accommodate CPE in the overlay feedback system, or overlay control module (OCM). Determining a high resolution fingerprint from measured data requires extremely dense overlay sampling that takes a significant amount of measurement time. For static corrections this is acceptable, but in an automated dynamic correction system this method creates extreme bottlenecks for the throughput of said system as new lots have to wait until the previous lot is measured. One solution is using a less dense overlay sampling scheme and employing computationally up-sampled data to a dense fingerprint. That method uses a global fingerprint model over the entire wafer; measured localized overlay errors are therefore not always represented in its up-sampled output. This paper will discuss a hybrid system shown in Fig. 1 that combines a computationally up-sampled fingerprint with the measured data to more accurately capture the actual fingerprint, including local overlay errors. Such a hybrid system is shown to result in reduced modelled residuals while determining the fingerprint, and better on-product overlay performance.

  7. Sampling device for withdrawing a representative sample from single and multi-phase flows

    Science.gov (United States)

    Apley, Walter J.; Cliff, William C.; Creer, James M.

    1984-01-01

    A fluid stream sampling device has been developed for the purpose of obtaining a representative sample from a single or multi-phase fluid flow. This objective is carried out by means of a probe which may be inserted into the fluid stream. Individual samples are withdrawn from the fluid flow by sampling ports with particular spacings, and the sampling parts are coupled to various analytical systems for characterization of the physical, thermal, and chemical properties of the fluid flow as a whole and also individually.

  8. Patch-based visual tracking with online representative sample selection

    Science.gov (United States)

    Ou, Weihua; Yuan, Di; Li, Donghao; Liu, Bin; Xia, Daoxun; Zeng, Wu

    2017-05-01

    Occlusion is one of the most challenging problems in visual object tracking. Recently, a lot of discriminative methods have been proposed to deal with this problem. For the discriminative methods, it is difficult to select the representative samples for the target template updating. In general, the holistic bounding boxes that contain tracked results are selected as the positive samples. However, when the objects are occluded, this simple strategy easily introduces the noises into the training data set and the target template and then leads the tracker to drift away from the target seriously. To address this problem, we propose a robust patch-based visual tracker with online representative sample selection. Different from previous works, we divide the object and the candidates into several patches uniformly and propose a score function to calculate the score of each patch independently. Then, the average score is adopted to determine the optimal candidate. Finally, we utilize the non-negative least square method to find the representative samples, which are used to update the target template. The experimental results on the object tracking benchmark 2013 and on the 13 challenging sequences show that the proposed method is robust to the occlusion and achieves promising results.

  9. Determination of geostatistically representative sampling locations in Porsuk Dam Reservoir (Turkey)

    Science.gov (United States)

    Aksoy, A.; Yenilmez, F.; Duzgun, S.

    2013-12-01

    Several factors such as wind action, bathymetry and shape of a lake/reservoir, inflows, outflows, point and diffuse pollution sources result in spatial and temporal variations in water quality of lakes and reservoirs. The guides by the United Nations Environment Programme and the World Health Organization to design and implement water quality monitoring programs suggest that even a single monitoring station near the center or at the deepest part of a lake will be sufficient to observe long-term trends if there is good horizontal mixing. In stratified water bodies, several samples can be required. According to the guide of sampling and analysis under the Turkish Water Pollution Control Regulation, a minimum of five sampling locations should be employed to characterize the water quality in a reservoir or a lake. The European Union Water Framework Directive (2000/60/EC) states to select a sufficient number of monitoring sites to assess the magnitude and impact of point and diffuse sources and hydromorphological pressures in designing a monitoring program. Although existing regulations and guidelines include frameworks for the determination of sampling locations in surface waters, most of them do not specify a procedure in establishment of monitoring aims with representative sampling locations in lakes and reservoirs. In this study, geostatistical tools are used to determine the representative sampling locations in the Porsuk Dam Reservoir (PDR). Kernel density estimation and kriging were used in combination to select the representative sampling locations. Dissolved oxygen and specific conductivity were measured at 81 points. Sixteen of them were used for validation. In selection of the representative sampling locations, care was given to keep similar spatial structure in distributions of measured parameters. A procedure was proposed for that purpose. Results indicated that spatial structure was lost under 30 sampling points. This was as a result of varying water

  10. On the Representativeness of Norming Samples for Aptitude Test

    National Research Council Canada - National Science Library

    Sims, William

    2003-01-01

    ...). We regressed aptitude test scores on demographics and concluded that: ̂ Norming sample for aptitude tests must be representative of the target population with respect to age, race"ethnicity, gender, respondent's education, and mother's...

  11. Representativeness-based sampling network design for the State of Alaska

    Science.gov (United States)

    Forrest M. Hoffman; Jitendra Kumar; Richard T. Mills; William W. Hargrove

    2013-01-01

    Resource and logistical constraints limit the frequency and extent of environmental observations, particularly in the Arctic, necessitating the development of a systematic sampling strategy to maximize coverage and objectively represent environmental variability at desired scales. A quantitative methodology for stratifying sampling domains, informing site selection,...

  12. Devices used by automated milking systems are similarly accurate in estimating milk yield and in collecting a representative milk sample compared with devices used by farms with conventional milk recording

    NARCIS (Netherlands)

    Kamphuis, Claudia; Dela Rue, B.; Turner, S.A.; Petch, S.

    2015-01-01

    Information on accuracy of milk-sampling devices used on farms with automated milking systems (AMS) is essential for development of milk recording protocols. The hypotheses of this study were (1) devices used by AMS units are similarly accurate in estimating milk yield and in collecting

  13. Quantitative analysis of nano-pore geomaterials and representative sampling for digital rock physics

    Science.gov (United States)

    Yoon, H.; Dewers, T. A.

    2014-12-01

    Geomaterials containing nano-pores (e.g., shales and carbonate rocks) have become increasingly important for emerging problems such as unconventional gas and oil resources, enhanced oil recovery, and geologic storage of CO2. Accurate prediction of coupled geophysical and chemical processes at the pore scale requires realistic representation of pore structure and topology. This is especially true for chalk materials, where pore networks are small and complex, and require characterization at sub-micron scale. In this work, we apply laser scanning confocal microscopy to characterize pore structures and microlithofacies at micron- and greater scales and dual focused ion beam-scanning electron microscopy (FIB-SEM) for 3D imaging of nanometer-to-micron scale microcracks and pore distributions. With imaging techniques advanced for nano-pore characterization, a problem of scale with FIB-SEM images is how to take nanometer scale information and apply it to the thin-section or larger scale. In this work, several texture characterization techniques including graph-based spectral segmentation, support vector machine, and principal component analysis are applied for segmentation clusters represented by 1-2 FIB-SEM samples per each cluster. Geometric and topological properties are analyzed and lattice-Boltzmann method (LBM) is used to obtain permeability at several different scales. Upscaling of permeability to the Darcy scale (e.g., the thin-section scale) with image dataset will be discussed with emphasis on understanding microfracture-matrix interaction, representative volume for FIB-SEM sampling, and multiphase flow and reactive transport. Funding from the DOE Basic Energy Sciences Geosciences Program is gratefully acknowledged. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under

  14. Assessing terpene content variability of whitebark pine in order to estimate representative sample size

    Directory of Open Access Journals (Sweden)

    Stefanović Milena

    2013-01-01

    Full Text Available In studies of population variability, particular attention has to be paid to the selection of a representative sample. The aim of this study was to assess the size of the new representative sample on the basis of the variability of chemical content of the initial sample on the example of a whitebark pine population. Statistical analysis included the content of 19 characteristics (terpene hydrocarbons and their derivates of the initial sample of 10 elements (trees. It was determined that the new sample should contain 20 trees so that the mean value calculated from it represents a basic set with a probability higher than 95 %. Determination of the lower limit of the representative sample size that guarantees a satisfactory reliability of generalization proved to be very important in order to achieve cost efficiency of the research. [Projekat Ministarstva nauke Republike Srbije, br. OI-173011, br. TR-37002 i br. III-43007

  15. Risk Gambling and Personality: Results from a Representative Swedish Sample.

    Science.gov (United States)

    Sundqvist, Kristina; Wennberg, Peter

    2015-12-01

    The association between personality and gambling has been explored previously. However, few studies are based on representative populations. This study aimed at examining the association between risk gambling and personality in a representative Swedish population. A random Swedish sample (N = 19,530) was screened for risk gambling using the Lie/Bet questionnaire. The study sample (N = 257) consisted of those screening positive on Lie/Bet and completing a postal questionnaire about gambling and personality (measured with the NODS-PERC and the HP5i respectively). Risk gambling was positively correlated with Negative Affectivity (a facet of Neuroticism) and Impulsivity (an inversely related facet of Conscientiousness), but all associations were weak. When taking age and gender into account, there were no differences in personality across game preference groups, though preferred game correlated with level of risk gambling. Risk gamblers scored lower than the population norm data with respect to Negative Affectivity, but risk gambling men scored higher on Impulsivity. The association between risk gambling and personality found in previous studies was corroborated in this study using a representative sample. We conclude that risk and problem gamblers should not be treated as a homogeneous group, and prevention and treatment interventions should be adapted according to differences in personality, preferred type of game and the risk potential of the games.

  16. Phylogenetic representativeness: a new method for evaluating taxon sampling in evolutionary studies

    Directory of Open Access Journals (Sweden)

    Passamonti Marco

    2010-04-01

    Full Text Available Abstract Background Taxon sampling is a major concern in phylogenetic studies. Incomplete, biased, or improper taxon sampling can lead to misleading results in reconstructing evolutionary relationships. Several theoretical methods are available to optimize taxon choice in phylogenetic analyses. However, most involve some knowledge about the genetic relationships of the group of interest (i.e., the ingroup, or even a well-established phylogeny itself; these data are not always available in general phylogenetic applications. Results We propose a new method to assess taxon sampling developing Clarke and Warwick statistics. This method aims to measure the "phylogenetic representativeness" of a given sample or set of samples and it is based entirely on the pre-existing available taxonomy of the ingroup, which is commonly known to investigators. Moreover, our method also accounts for instability and discordance in taxonomies. A Python-based script suite, called PhyRe, has been developed to implement all analyses we describe in this paper. Conclusions We show that this method is sensitive and allows direct discrimination between representative and unrepresentative samples. It is also informative about the addition of taxa to improve taxonomic coverage of the ingroup. Provided that the investigators' expertise is mandatory in this field, phylogenetic representativeness makes up an objective touchstone in planning phylogenetic studies.

  17. Spatiotemporally Representative and Cost-Efficient Sampling Design for Validation Activities in Wanglang Experimental Site

    Directory of Open Access Journals (Sweden)

    Gaofei Yin

    2017-11-01

    Full Text Available Spatiotemporally representative Elementary Sampling Units (ESUs are required for capturing the temporal variations in surface spatial heterogeneity through field measurements. Since inaccessibility often coexists with heterogeneity, a cost-efficient sampling design is mandatory. We proposed a sampling strategy to generate spatiotemporally representative and cost-efficient ESUs based on the conditioned Latin hypercube sampling scheme. The proposed strategy was constrained by multi-temporal Normalized Difference Vegetation Index (NDVI imagery, and the ESUs were limited within a sampling feasible region established based on accessibility criteria. A novel criterion based on the Overlapping Area (OA between the NDVI frequency distribution histogram from the sampled ESUs and that from the entire study area was used to assess the sampling efficiency. A case study in Wanglang National Nature Reserve in China showed that the proposed strategy improves the spatiotemporally representativeness of sampling (mean annual OA = 74.7% compared to the single-temporally constrained (OA = 68.7% and the random sampling (OA = 63.1% strategies. The introduction of the feasible region constraint significantly reduces in-situ labour-intensive characterization necessities at expenses of about 9% loss in the spatiotemporal representativeness of the sampling. Our study will support the validation activities in Wanglang experimental site providing a benchmark for locating the nodes of automatic observation systems (e.g., LAINet which need a spatially distributed and temporally fixed sampling design.

  18. Technical developments for accurate determination of amount of samples used for TOF measurements

    Directory of Open Access Journals (Sweden)

    Terada Kazushi

    2017-01-01

    Full Text Available Activity determination of 241,243Am samples has been performed with two separate methods of calorimetry and gamma-ray spectroscopy. Decay heat measurements of the samples were carried out by using a calorimeter, and activities of the samples were accurately determined with uncertainties less than 0.45%. The primary source of uncertainty in the calorimetric method is the accuracy of available half-life data. Gamma-ray detection efficiencies of a HPGe detector were determined with uncertainties of 1.5% by combining measured efficiencies and Monte Carlo simulation. Activities of the samples were determined with uncertainties less than 2.0% by gamma-ray spectroscopy and were concordant with those of the calorimetry.

  19. Diagnostic Accuracy of the Posttraumatic Stress Disorder Checklist–Civilian Version in a Representative Military Sample

    DEFF Research Database (Denmark)

    Karstoft, Karen-Inge; Andersen, Søren B.; Bertelsen, Mette

    2014-01-01

    This study aimed to assess the diagnostic accuracy of the Posttraumatic Stress Disorder Checklist-Civilian Version (PCL-C; Weathers, Litz, Herman, Huska, & Keane, 1993) and to establish the most accurate cutoff for prevalence estimation of posttraumatic stress disorder (PTSD) in a representative...

  20. Towards a representative periphytic diatom sample

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available The need to acquire a representative periphytic diatom sample for river water quality monitoring has been recognised in the development of existing diatom indices, important in the development and employment of diatom monitoring tools for the Water Framework Directive. In this study, a nested design with replication is employed to investigate the magnitude of variation in diatom biomass, composition and Trophic Diatom Index at varying scales within a small chalk river. The study shows that the use of artificial substrates may not result in diatom communities that are typical of the surrounding natural substrates. Periphytic diatom biomass and composition varies between artificial and natural substrates, riffles and glides and between two stretches of the river channel. The study also highlights the existence of high variation in diatom frustule frequency and biovolume at the individual replicate scale which may have implications for the use of diatoms in routine monitoring.

  1. Recruiting a representative sample in adherence research-The MALT multisite prospective cohort study experience.

    Science.gov (United States)

    Shemesh, Eyal; Mitchell, Jeffrey; Neighbors, Katie; Feist, Susan; Hawkins, Andre; Brown, Amanda; Wanrong, Yin; Anand, Ravinder; Stuber, Margaret L; Annunziato, Rachel A

    2017-12-01

    Medication adherence is an important determinant of transplant outcomes. Attempts to investigate adherence are frequently undermined by selection bias: It is very hard to recruit and retain non-adherent patients in research efforts. This manuscript presents recruitment strategies and results from the MALT (Medication Adherence in children who had a Liver Transplant) multisite prospective cohort study. MALT sites recruited 400 pediatric liver transplant patients who agreed to be followed for 2 years. The primary purpose was to determine whether a marker of adherence, the Medication Level Variability Index (MLVI), predicts rejection outcomes. The present manuscript describes methods used in MALT to ensure that a representative sample was recruited, and presents detailed recruitment results. MALT sites were able to recruit a nationally representative sample, as determined by a comparison between the MALT cohort and a national sample of transplant recipients. Strategies that helped ensure that the sample was representative included monitoring of the outcome measure in comparison with a national sample, drastically limiting patient burden, and specific recruitment methods. We discuss the importance of a representative sample in adherence research and recommend that future efforts to study adherence pay special attention to sample characteristics. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  2. OSMOSE experiment representativity studies.

    Energy Technology Data Exchange (ETDEWEB)

    Aliberti, G.; Klann, R.; Nuclear Engineering Division

    2007-10-10

    The OSMOSE program aims at improving the neutronic predictions of advanced nuclear fuels through measurements in the MINERVE facility at the CEA-Cadarache (France) on samples containing the following separated actinides: Th-232, U-233, U-234, U-235, U-236, U-238, Np-237, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, Am-241, Am-243, Cm-244 and Cm-245. The goal of the experimental measurements is to produce a database of reactivity-worth measurements in different neutron spectra for the separated heavy nuclides. This database can then be used as a benchmark for integral reactivity-worth measurements to verify and validate reactor analysis codes and integral cross-section values for the isotopes tested. In particular, the OSMOSE experimental program will produce very accurate sample reactivity-worth measurements for a series of actinides in various spectra, from very thermalized to very fast. The objective of the analytical program is to make use of the experimental data to establish deficiencies in the basic nuclear data libraries, identify their origins, and provide guidelines for nuclear data improvements in coordination with international programs. To achieve the proposed goals, seven different neutron spectra can be created in the MINERVE facility: UO2 dissolved in water (representative of over-moderated LWR systems), UO2 matrix in water (representative of LWRs), a mixed oxide fuel matrix, two thermal spectra containing large epithermal components (representative of under-moderated reactors), a moderated fast spectrum (representative of fast reactors which have some slowing down in moderators such as lead-bismuth or sodium), and a very hard spectrum (representative of fast reactors with little moderation from reactor coolant). The different spectra are achieved by changing the experimental lattice within the MINERVE reactor. The experimental lattice is the replaceable central part of MINERVE, which establishes the spectrum at the sample location. This configuration

  3. Accurate recapture identification for genetic mark–recapture studies with error-tolerant likelihood-based match calling and sample clustering

    Science.gov (United States)

    Sethi, Suresh; Linden, Daniel; Wenburg, John; Lewis, Cara; Lemons, Patrick R.; Fuller, Angela K.; Hare, Matthew P.

    2016-01-01

    Error-tolerant likelihood-based match calling presents a promising technique to accurately identify recapture events in genetic mark–recapture studies by combining probabilities of latent genotypes and probabilities of observed genotypes, which may contain genotyping errors. Combined with clustering algorithms to group samples into sets of recaptures based upon pairwise match calls, these tools can be used to reconstruct accurate capture histories for mark–recapture modelling. Here, we assess the performance of a recently introduced error-tolerant likelihood-based match-calling model and sample clustering algorithm for genetic mark–recapture studies. We assessed both biallelic (i.e. single nucleotide polymorphisms; SNP) and multiallelic (i.e. microsatellite; MSAT) markers using a combination of simulation analyses and case study data on Pacific walrus (Odobenus rosmarus divergens) and fishers (Pekania pennanti). A novel two-stage clustering approach is demonstrated for genetic mark–recapture applications. First, repeat captures within a sampling occasion are identified. Subsequently, recaptures across sampling occasions are identified. The likelihood-based matching protocol performed well in simulation trials, demonstrating utility for use in a wide range of genetic mark–recapture studies. Moderately sized SNP (64+) and MSAT (10–15) panels produced accurate match calls for recaptures and accurate non-match calls for samples from closely related individuals in the face of low to moderate genotyping error. Furthermore, matching performance remained stable or increased as the number of genetic markers increased, genotyping error notwithstanding.

  4. In search of a representative sample of residential building work.

    Science.gov (United States)

    Lobb, Brenda; Woods, Gregory R

    2012-09-01

    Most research investigating injuries in construction work is limited by reliance on work samples unrepresentative of the multiple, variable-cycle tasks involved, resulting in incomplete characterisation of ergonomic exposures. In this case study, a participatory approach was used including hierarchical task analysis and site observations of a typical team of house builders in New Zealand, over several working days, to obtain a representative work sample. The builders' work consisted of 14 goal-defined jobs using varying subsets of 15 task types, each taking from less than 1 s to more than 1 h and performed in a variety of postures. Task type and duration varied within and between participants and days, although all participants spent at least 25% of the time moving from place to place, mostly carrying materials, and more than half the time either reaching up or bending down to work. This research has provided a description of residential building work based on a work sample more nearly representative than those previously published and has demonstrated a simple, low-cost but robust field observation method that can provide a valid basis for further study of hazard exposures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  5. Depression and Suicidality among Bisexual Youth: A Nationally Representative Sample

    Science.gov (United States)

    Taliaferro, Lindsay A.; Gloppen, Kari M.; Muehlenkamp, Jennifer J.; Eisenberg, Marla E.

    2018-01-01

    To address gaps in the literature on bisexual youth, we used the first nationally representative sample of high school students from the United States to determine profiles of behaviors related to depressive symptoms, a suicide attempt, and a medically-serious attempt. We examined the data from 922 bisexual students in grades 9-12 who completed…

  6. Video Games Exposure and Sexism in a Representative Sample of Adolescents.

    Science.gov (United States)

    Bègue, Laurent; Sarda, Elisa; Gentile, Douglas A; Bry, Clementine; Roché, Sebastian

    2017-01-01

    Research has indicated that many video games are saturated with stereotypes of women and that these contents may cultivate sexism. The purpose of this study was to assess the relationship between video game exposure and sexism for the first time in a large and representative sample. Our aim was also to measure the strength of this association when two other significant and well-studied sources of sexism, television exposure and religiosity, were also included in a multivariate model. A representative sample of 13520 French youth aged 11-19 years completed a survey measuring weekly video game and television exposure, religiosity, and sexist attitudes toward women. Controlling for gender and socioeconomic level, results showed that video game exposure and religiosity were both related to sexism. Implications of these results for future research on sexism in video games are discussed.

  7. Stuttering Attitudes among Turkish Family Generations and Neighbors from Representative Samples

    Science.gov (United States)

    Ozdemir, R. Sertan; St. Louis, Kenneth O.; Topbas, Seyhun

    2011-01-01

    Purpose: Attitudes toward stuttering, measured by the "Public Opinion Survey of Human Attributes-Stuttering" ("POSHA-S"), are compared among (a) two different representative samples; (b) family generations (children, parents, and either grandparents or uncles and aunts) and neighbors; (c) children, parents, grandparents/adult…

  8. A Study on the Representative Sampling Survey for Radionuclide Analysis of RI Waste

    Energy Technology Data Exchange (ETDEWEB)

    Jee, K. Y. [KAERI, Daejeon (Korea, Republic of); Kim, Juyoul; Jung, Gunhyo [FNC Tech. Co., Daejeon (Korea, Republic of)

    2007-07-15

    We developed a quantitative method for attaining a representative sample during sampling survey of RI waste. Considering a source, process, and type of RI waste, the method computes the number of sample, confidence interval, variance, and coefficient of variance. We also systematize the method of sampling survey logically and quantitatively. The result of this study can be applied to sampling survey of low- and intermediate-level waste generated from nuclear power plant during the transfer process to disposal facility.

  9. Fast and accurate algorithm for the computation of complex linear canonical transforms.

    Science.gov (United States)

    Koç, Aykut; Ozaktas, Haldun M; Hesselink, Lambertus

    2010-09-01

    A fast and accurate algorithm is developed for the numerical computation of the family of complex linear canonical transforms (CLCTs), which represent the input-output relationship of complex quadratic-phase systems. Allowing the linear canonical transform parameters to be complex numbers makes it possible to represent paraxial optical systems that involve complex parameters. These include lossy systems such as Gaussian apertures, Gaussian ducts, or complex graded-index media, as well as lossless thin lenses and sections of free space and any arbitrary combinations of them. Complex-ordered fractional Fourier transforms (CFRTs) are a special case of CLCTs, and therefore a fast and accurate algorithm to compute CFRTs is included as a special case of the presented algorithm. The algorithm is based on decomposition of an arbitrary CLCT matrix into real and complex chirp multiplications and Fourier transforms. The samples of the output are obtained from the samples of the input in approximately N log N time, where N is the number of input samples. A space-bandwidth product tracking formalism is developed to ensure that the number of samples is information-theoretically sufficient to reconstruct the continuous transform, but not unnecessarily redundant.

  10. Age Differences in Personality: Evidence from a Nationally Representative Australian Sample

    Science.gov (United States)

    Lucas, Richard E.; Donnellan, M. Brent

    2009-01-01

    Cross-sectional age differences in the Big Five personality traits were examined in a nationally representative sample of Australians (N = 12,618; age range = 15-84). Extraversion, Neuroticism, and Openness were negatively associated with age, whereas Agreeableness and Conscientiousness were positively associated with age. Effect sizes comparing…

  11. Method to make accurate concentration and isotopic measurements for small gas samples

    Science.gov (United States)

    Palmer, M. R.; Wahl, E.; Cunningham, K. L.

    2013-12-01

    Carbon isotopic ratio measurements of CO2 and CH4 provide valuable insight into carbon cycle processes. However, many of these studies, like soil gas, soil flux, and water head space experiments, provide very small gas sample volumes, too small for direct measurement by current constant-flow Cavity Ring-Down (CRDS) isotopic analyzers. Previously, we addressed this issue by developing a sample introduction module which enabled the isotopic ratio measurement of 40ml samples or smaller. However, the system, called the Small Sample Isotope Module (SSIM), does dilute the sample during the delivery with inert carrier gas which causes a ~5% reduction in concentration. The isotopic ratio measurements are not affected by this small dilution, but researchers are naturally interested accurate concentration measurements. We present the accuracy and precision of a new method of using this delivery module which we call 'double injection.' Two portions of the 40ml of the sample (20ml each) are introduced to the analyzer, the first injection of which flushes out the diluting gas and the second injection is measured. The accuracy of this new method is demonstrated by comparing the concentration and isotopic ratio measurements for a gas sampled directly and that same gas measured through the SSIM. The data show that the CO2 concentration measurements were the same within instrument precision. The isotopic ratio precision (1σ) of repeated measurements was 0.16 permil for CO2 and 1.15 permil for CH4 at ambient concentrations. This new method provides a significant enhancement in the information provided by small samples.

  12. Adherence rates to the Mediterranean diet are low in a representative sample of Greek children and adolescents

    NARCIS (Netherlands)

    Kontogianni, Meropi D; Vidra, Nikoletta; Farmaki, Anastasia-Eleni; Koinaki, Stella; Belogianni, Katerina; Sofrona, Stavroula; Magkanari, Flora; Yannakoulia, Mary

    2008-01-01

    Data from studies in pediatric samples exploring adherence to the Mediterranean diet are scarce. The aim of the present work was to explore adherence to a Mediterranean diet pattern in a representative sample of Greek children and adolescents. The study sample (n = 1305, 3-18 y) was representative

  13. Psychiatric disorders in a representative sample of incarcerated boys in the Netherlands

    NARCIS (Netherlands)

    Vreugdenhil, Coby; Doreleijers, Theo A. H.; Vermeiren, Robert; Wouters, Luuk F. J. M.; van den Brink, Wim

    2004-01-01

    Objective: To determine the prevalence of psychiatric disorders among incarcerated male adolescents and to investigate the influence of psychopathology on allocation to either plain detention or detention with compulsory treatment. Method: A cross-sectional study of a representative sample (N = 204)

  14. Forecasting elections with mere recognition from small, lousy samples: A comparison of collective recognition, wisdom of crowds, and representative polls

    Directory of Open Access Journals (Sweden)

    Wolfgang Gaissmeier

    2011-02-01

    Full Text Available We investigated the extent to which the human capacity for recognition helps to forecast political elections: We compared naive recognition-based election forecasts computed from convenience samples of citizens' recognition of party names to (i standard polling forecasts computed from representative samples of citizens' voting intentions, and to (ii simple---and typically very accurate---wisdom-of-crowds-forecasts computed from the same convenience samples of citizens' aggregated hunches about election results. Results from four major German elections show that mere recognition of party names forecast the parties' electoral success fairly well. Recognition-based forecasts were most competitive with the other models when forecasting the smaller parties' success and for small sample sizes. However, wisdom-of-crowds-forecasts outperformed recognition-based forecasts in most cases. It seems that wisdom-of-crowds-forecasts are able to draw on the benefits of recognition while at the same time avoiding its downsides, such as lack of discrimination among very famous parties or recognition caused by factors unrelated to electoral success. Yet it seems that a simple extension of the recognition-based forecasts---asking people what proportion of the population would recognize a party instead of whether they themselves recognize it---is also able to eliminate these downsides.

  15. Early menarche and childhood adversities in a nationally representative sample

    OpenAIRE

    Henrichs, Kimberly L; McCauley, Heather L; Miller, Elizabeth; Styne, Dennis M; Saito, Naomi; Breslau, Joshua

    2014-01-01

    Background Epidemiological evidence suggests that early menarche, defined as onset of menses at age 11 or earlier, has increased in prevalence in recent birth cohorts and is associated with multiple poor medical and mental health outcomes in adulthood. There is evidence that childhood adversities occurring prior to menarche contribute to early menarche. Methods Data collected in face-to-face interviews with a nationally representative sample of women age 18 and over (N = 3288), as part of the...

  16. Applying an Occupational Classification to a National Representative Sample of Work Histories of Young Men and Women.

    Science.gov (United States)

    Nafziger, Dean H.; And Others

    Holland's occupational classification was used to analyze the work histories of a national representative sample of young men and women age 14-24. This study extended previous tests of the classification in three ways: (1) It was applied for the first time to a national, representative sample of women, (2) For the sample of men, 3-year…

  17. Procedures for sampling and sample-reduction within quality assurance systems for solid biofuels

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-15

    The bias introduced when sampling solid biofuels from stockpiles or containers instead of from moving streams is assessed as well as the number and size of samples required to represent accurately the bulk sample, variations introduced when reducing bulk samples into samples for testing, and the usefulness of sample reduction methods. Details are given of the experimental work carried out in Sweden and Denmark using sawdust, wood chips, wood pellets, forestry residues and straw. The production of a model European Standard for quality assurance of solid biofuels is examined.

  18. Does self-selection affect samples' representativeness in online surveys? An investigation in online video game research.

    Science.gov (United States)

    Khazaal, Yasser; van Singer, Mathias; Chatton, Anne; Achab, Sophia; Zullino, Daniele; Rothen, Stephane; Khan, Riaz; Billieux, Joel; Thorens, Gabriel

    2014-07-07

    The number of medical studies performed through online surveys has increased dramatically in recent years. Despite their numerous advantages (eg, sample size, facilitated access to individuals presenting stigmatizing issues), selection bias may exist in online surveys. However, evidence on the representativeness of self-selected samples in online studies is patchy. Our objective was to explore the representativeness of a self-selected sample of online gamers using online players' virtual characters (avatars). All avatars belonged to individuals playing World of Warcraft (WoW), currently the most widely used online game. Avatars' characteristics were defined using various games' scores, reported on the WoW's official website, and two self-selected samples from previous studies were compared with a randomly selected sample of avatars. We used scores linked to 1240 avatars (762 from the self-selected samples and 478 from the random sample). The two self-selected samples of avatars had higher scores on most of the assessed variables (except for guild membership and exploration). Furthermore, some guilds were overrepresented in the self-selected samples. Our results suggest that more proficient players or players more involved in the game may be more likely to participate in online surveys. Caution is needed in the interpretation of studies based on online surveys that used a self-selection recruitment procedure. Epidemiological evidence on the reduced representativeness of sample of online surveys is warranted.

  19. Like a virgin (mother): analysis of data from a longitudinal, US population representative sample survey

    OpenAIRE

    Herring, Amy H; Attard, Samantha M; Gordon-Larsen, Penny; Joyner, William H; Halpern, Carolyn T

    2013-01-01

    Objective To estimate the incidence of self report of pregnancy without sexual intercourse (virgin pregnancy) and factors related to such reporting, in a population representative group of US adolescents and young adults. Design Longitudinal, population representative sample survey. Setting Nationally representative, multiethnic National Longitudinal Study of Adolescent Health, United States. Participants 7870 women enrolled at wave I (1995) and completing the most recent wave of data collect...

  20. Difficulties in obtaining representative samples for compliance with the Ballast Water Management Convention

    Digital Repository Service at National Institute of Oceanography (India)

    Carney, K.J; Basurko, O.C; Pazouki, K.; Marsham, S.; Delany, J; Desai, D.V.; Anil, A.C; Mesbahi, E.

    water, the shape, size and number of ballast tanks and the heterogeneous distribution of organisms within tanks. These factors hinder efforts to obtain samples that truly represent the total ballast water onboard a vessel. A known cell density...

  1. Rats track odour trails accurately using a multi-layered strategy with near-optimal sampling.

    Science.gov (United States)

    Khan, Adil Ghani; Sarangi, Manaswini; Bhalla, Upinder Singh

    2012-02-28

    Tracking odour trails is a crucial behaviour for many animals, often leading to food, mates or away from danger. It is an excellent example of active sampling, where the animal itself controls how to sense the environment. Here we show that rats can track odour trails accurately with near-optimal sampling. We trained rats to follow odour trails drawn on paper spooled through a treadmill. By recording local field potentials (LFPs) from the olfactory bulb, and sniffing rates, we find that sniffing but not LFPs differ between tracking and non-tracking conditions. Rats can track odours within ~1 cm, and this accuracy is degraded when one nostril is closed. Moreover, they show path prediction on encountering a fork, wide 'casting' sweeps on encountering a gap and detection of reappearance of the trail in 1-2 sniffs. We suggest that rats use a multi-layered strategy, and achieve efficient sampling and high accuracy in this complex task.

  2. Demonstration/Validation of Incremental Sampling at Two Diverse Military Ranges and Development of an Incremental Sampling Tool

    Science.gov (United States)

    2010-06-01

    Sampling (MIS)? • Technique of combining many increments of soil from a number of points within exposure area • Developed by Enviro Stat (Trademarked...Demonstrating a reliable soil sampling strategy to accurately characterize contaminant concentrations in spatially extreme and heterogeneous...into a set of decision (exposure) units • One or several discrete or small- scale composite soil samples collected to represent each decision unit

  3. Two-dimensional structure and kinematics of a representative sample of low-z ULIRGs

    International Nuclear Information System (INIS)

    Garcia-Marin, M; Colina, L; Arribas, S

    2008-01-01

    We present the optical INTEGRAL integral field spectroscopy data and Hubble Space Telescope archive images obtained for a representative sample of 22 local Ultraluminous Infrared Galaxies (ULIRGs L IR >10 12 L o-dot ). The sample has been designed for fulfilling a program aimed at studying the internal structure and kinematics of this type of galaxies. Taking advantage of the two-dimensional nature of the data, we study the structure of the stellar and ionized gas, the internal ionization state and the gas kinematics. In this contribution we present the sample and the most important results obtained so far.

  4. The prevalence of Nonsuicidal Self-Injury (NSSI in a representative sample of the German population

    Directory of Open Access Journals (Sweden)

    Paul L. Plener

    2016-10-01

    Full Text Available Abstract Background Non-suicidal self-injury (NSSI is a proposed new “condition for further study” in the DSM-5. To date no prevalence data has been available on this diagnostic entity from a representative sample of the general population. Methods A representative sample of the German population (N = 2509, mean age = 48.8 years, SD = 18.1, female 55.4 % completed the NSSI section of the German version of the Self-Injurious Thoughts and Behaviors Interview (SITBI-G. Results A history of NSSI at least once during lifetime was reported by 3.1 % of all participants, with higher lifetime prevalence rates in younger age groups. DSM-5 NSSI disorder criteria were met by 0.3 %. The most common function of NSSI was automatic negative reinforcement (e.g. to alleviate negative feelings. Conclusions To the best of our knowledge, this is the first study reporting rates for the proposed NSSI category in DSM-5 from a representative sample of the general population. In comparison to findings from community samples of adolescents, adults seem to have lower lifetime prevalence rates of NSSI, thus making it necessary to emphasize prevention and treatment efforts in younger age groups.

  5. A new, accurate predictive model for incident hypertension

    DEFF Research Database (Denmark)

    Völzke, Henry; Fung, Glenn; Ittermann, Till

    2013-01-01

    Data mining represents an alternative approach to identify new predictors of multifactorial diseases. This work aimed at building an accurate predictive model for incident hypertension using data mining procedures.......Data mining represents an alternative approach to identify new predictors of multifactorial diseases. This work aimed at building an accurate predictive model for incident hypertension using data mining procedures....

  6. Modeling Optimal Cutoffs for the Brazilian Household Food Insecurity Measurement Scale in a Nationwide Representative Sample.

    Science.gov (United States)

    Interlenghi, Gabriela S; Reichenheim, Michael E; Segall-Corrêa, Ana M; Pérez-Escamilla, Rafael; Moraes, Claudia L; Salles-Costa, Rosana

    2017-07-01

    Background: This is the second part of a model-based approach to examine the suitability of the current cutoffs applied to the raw score of the Brazilian Household Food Insecurity Measurement Scale [Escala Brasileira de Insegurança Alimentar (EBIA)]. The approach allows identification of homogeneous groups who correspond to severity levels of food insecurity (FI) and, by extension, discriminant cutoffs able to accurately distinguish these groups. Objective: This study aims to examine whether the model-based approach for identifying optimal cutoffs first implemented in a local sample is replicated in a countrywide representative sample. Methods: Data were derived from the Brazilian National Household Sample Survey of 2013 ( n = 116,543 households). Latent class factor analysis (LCFA) models from 2 to 5 classes were applied to the scale's items to identify the number of underlying FI latent classes. Next, identification of optimal cutoffs on the overall raw score was ascertained from these identified classes. Analyses were conducted in the aggregate data and by macroregions. Finally, model-based classifications (latent classes and groupings identified thereafter) were contrasted to the traditionally used classification. Results: LCFA identified 4 homogeneous groups with a very high degree of class separation (entropy = 0.934-0.975). The following cutoffs were identified in the aggregate data: between 1 and 2 (1/2), 5 and 6 (5/6), and 10 and 11 (10/11) in households with children and/or adolescents category emerged consistently in all analyses. Conclusions: Nationwide findings corroborate previous local evidence that households with an overall score of 1 are more akin to those scoring negative on all items. These results may contribute to guide experts' and policymakers' decisions on the most appropriate EBIA cutoffs. © 2017 American Society for Nutrition.

  7. Accurate Frequency Estimation Based On Three-Parameter Sine-Fitting With Three FFT Samples

    Directory of Open Access Journals (Sweden)

    Liu Xin

    2015-09-01

    Full Text Available This paper presents a simple DFT-based golden section searching algorithm (DGSSA for the single tone frequency estimation. Because of truncation and discreteness in signal samples, Fast Fourier Transform (FFT and Discrete Fourier Transform (DFT are inevitable to cause the spectrum leakage and fence effect which lead to a low estimation accuracy. This method can improve the estimation accuracy under conditions of a low signal-to-noise ratio (SNR and a low resolution. This method firstly uses three FFT samples to determine the frequency searching scope, then – besides the frequency – the estimated values of amplitude, phase and dc component are obtained by minimizing the least square (LS fitting error of three-parameter sine fitting. By setting reasonable stop conditions or the number of iterations, the accurate frequency estimation can be realized. The accuracy of this method, when applied to observed single-tone sinusoid samples corrupted by white Gaussian noise, is investigated by different methods with respect to the unbiased Cramer-Rao Low Bound (CRLB. The simulation results show that the root mean square error (RMSE of the frequency estimation curve is consistent with the tendency of CRLB as SNR increases, even in the case of a small number of samples. The average RMSE of the frequency estimation is less than 1.5 times the CRLB with SNR = 20 dB and N = 512.

  8. Sleepiness and Motor Vehicle Crashes in a Representative Sample of Portuguese Drivers: The Importance of Epidemiological Representative Surveys.

    Science.gov (United States)

    Gonçalves, M; Peralta, A R; Monteiro Ferreira, J; Guilleminault, Christian

    2015-01-01

    Sleepiness is considered to be a leading cause of crashes. Despite the huge amount of information collected in questionnaire studies, only some are based on representative samples of the population. Specifics of the populations studied hinder the generalization of these previous findings. For the Portuguese population, data from sleep-related car crashes/near misses and sleepiness while driving are missing. The objective of this study is to determine the prevalence of near-miss and nonfatal motor vehicle crashes related to sleepiness in a representative sample of Portuguese drivers. Structured phone interviews regarding sleepiness and sleep-related crashes and near misses, driving habits, demographic data, and sleep quality were conducted using the Pittsburgh Sleep Quality Index and sleep apnea risk using the Berlin questionnaire. A multivariate regression analysis was used to determine the associations with sleepy driving (feeling sleepy or falling asleep while driving) and sleep-related near misses and crashes. Nine hundred subjects, representing the Portuguese population of drivers, were included; 3.1% acknowledged falling asleep while driving during the previous year and 0.67% recalled sleepiness-related crashes. Higher education, driving more than 15,000 km/year, driving more frequently between 12:00 a.m. and 6 a.m., fewer years of having a driver's license, less total sleep time per night, and higher scores on the Epworth Sleepiness Scale (ESS) were all independently associated with sleepy driving. Sleepiness-related crashes and near misses were associated only with falling asleep at the wheel in the previous year. Sleep-related crashes occurred more frequently in drivers who had also had sleep-related near misses. Portugal has lower self-reported sleepiness at the wheel and sleep-related near misses than most other countries where epidemiological data are available. Different population characteristics and cultural, social, and road safety specificities may

  9. Association of post-traumatic stress disorder and obesity in a nationally representative sample.

    Science.gov (United States)

    Pagoto, Sherry L; Schneider, Kristin L; Bodenlos, Jamie S; Appelhans, Bradley M; Whited, Matthew C; Ma, Yunsheng; Lemon, Stephenie C

    2012-01-01

    Recent studies suggest a possible link between post-traumatic stress disorder (PTSD) and obesity risk, which would have implications for the development of obesity-related diseases in this population. The present study examined the association between PTSD and obesity and whether this association differed by sex in a representative sample of the US population. A secondary objective was to determine whether the association between PTSD and obesity was mediated by binge eating disorder (BED). Data were from the Collaborative Psychiatric Epidemiology Surveys (CPES), which comprises three nationally representative cross-sectional surveys that were conducted between 2001 and 2003. Logistic regression analyses weighted to represent the general US adult population were performed. In the total sample of 20,013 participants, rates of obesity were 24.1% for persons without a lifetime history of PTSD and 32.6% among persons with PTSD in the past year. Adjusting for socio-demographic characteristics, depression, substance and alcohol abuse/dependence, and psychotropic medication status, past year PTSD was associated with greater likelihood of obesity (odds ratio (OR) = 1.51; 95% confidence interval (CI) = 1.18, 1.95), with no differences by gender. BED did not statistically mediate the relationship between PTSD and obesity. The present study provides support for a link between PTSD and obesity. Findings further existing literature by indicating that the association is consistent across sexes and is not statistically mediated by BED.

  10. Symptoms and problems in a nationally representative sample of advanced cancer patients

    DEFF Research Database (Denmark)

    Johnsen, Anna Thit; Petersen, Morten Aagaard; Pedersen, Lise

    2009-01-01

    Little is known about the need for palliative care among advanced cancer patients who are not in specialist palliative care. The purpose was to identify prevalence and predictors of symptoms and problems in a nationally representative sample of Danish advanced cancer patients. Patients with cancer...... or not were associated with several symptoms and problems. This is probably the first nationally representative study of its kind. It shows that advanced cancer patients in Denmark have symptoms and problems that deserve attention and that some patient groups are especially at risk....... predictors. In total, 977 (60%) patients participated. The most frequent symptoms/problems were fatigue (57%; severe 22%) followed by reduced role function, insomnia and pain. Age, cancer stage, primary tumour, type of department, marital status and whether the patient had recently been hospitalized...

  11. 76 FR 69585 - Testing and Labeling Pertaining to Product Certification Regarding Representative Samples for...

    Science.gov (United States)

    2011-11-08

    ... 1107 Testing and Labeling Pertaining to Product Certification Regarding Representative Samples for... [CPSC Docket No. CPSC-2011-0082] Testing and Labeling Pertaining to Product Certification Regarding... to Product Certification.'' The proposed rule was intended to implement what was then known as...

  12. Representativeness of two sampling procedures for an internet intervention targeting cancer-related distress: a comparison of convenience and registry samples.

    Science.gov (United States)

    Owen, Jason E; Bantum, Erin O'Carroll; Criswell, Kevin; Bazzo, Julie; Gorlick, Amanda; Stanton, Annette L

    2014-08-01

    Internet interventions often rely on convenience sampling, yet convenience samples may differ in important ways from systematic recruitment approaches. The purpose of this study was to evaluate potential demographic, medical, and psychosocial differences between Internet-recruited and registry-recruited cancer survivors in an Internet-based intervention. Participants were recruited from a cancer registry (n = 80) and via broad Internet outreach efforts (n = 160). Participants completed a set of self-report questionnaires, and both samples were compared to a population-based sample of cancer survivors (n = 5,150). The Internet sample was younger, better educated, more likely to be female, had longer time since diagnosis, and had more advanced stage of disease (p's sample was over-represented by men and those with prostate or other cancer types (p's sample also exhibited lower quality of life and social support and greater mood disturbance (p's convenience and systematic samples differ has important implications for external validity and potential for dissemination of Internet-based interventions.

  13. Sampling in epidemiological research: issues, hazards and pitfalls

    Science.gov (United States)

    Tyrer, Stephen; Heyman, Bob

    2016-01-01

    Surveys of people's opinions are fraught with difficulties. It is easier to obtain information from those who respond to text messages or to emails than to attempt to obtain a representative sample. Samples of the population that are selected non-randomly in this way are termed convenience samples as they are easy to recruit. This introduces a sampling bias. Such non-probability samples have merit in many situations, but an epidemiological enquiry is of little value unless a random sample is obtained. If a sufficient number of those selected actually complete a survey, the results are likely to be representative of the population. This editorial describes probability and non-probability sampling methods and illustrates the difficulties and suggested solutions in performing accurate epidemiological research. PMID:27087985

  14. Health Correlates of Insomnia Symptoms and Comorbid Mental Disorders in a Nationally Representative Sample of US Adolescents

    NARCIS (Netherlands)

    Blank, M.; Zhang, J.H.; Lamers, F.; Taylor, A.D.; Hickie, I.B.; Merikangas, K.R.

    2015-01-01

    Study Objectives: To estimate the prevalence and health correlates of insomnia symptoms and their association with comorbid mental disorders in a nationally representative sample of adolescents in the United States. Design: National representative cross-sectional study. Setting: Population-based

  15. [Anxiety in a representative sample of the Spanish population over 50 years-old].

    Science.gov (United States)

    Carreira Capeáns, Cecilia; Facal, David

    Anxiety is common throughout the ageing process. The objective of this study is to estimate the prevalence of anxiety in a representative sample of the Spanish population over 50 years-old. The data of this study come from the Pilot Study developed within the Longitudinal Ageing Study in Spain (ELES), in which a representative sample of the non-institutionalised Spanish population was evaluated. An analysis was performed on the data of 1086 people who answered the question «I am now going to read a list with a series of diseases or health problems. I would like you to tell me if your doctor has diagnosed any of them». The tools used were a questionnaire consisting of 218 questions, along with standardised tests, such as the Spanish version of the Mini-Mental State Examination. Anxiety was reported to have been diagnosed at some time in 14.3% of the sample. The prevalence was higher in women than in men (77.8 vs. 22.2%), decreasing with age, and related to different chronic diseases. The results show that the prevalence of anxiety throughout the lifespan is noticeable in people over 50 years, and should be taken into account, especially in the female population and in those with chronic diseases. Copyright © 2017 SEGG. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. Investigating sex differences in psychological predictors of snack intake among a large representative sample

    NARCIS (Netherlands)

    Adriaanse, M.A.; Evers, C.; Verhoeven, A.A.C.; de Ridder, D.T.D.

    It is often assumed that there are substantial sex differences in eating behaviour (e.g. women are more likely to be dieters or emotional eaters than men). The present study investigates this assumption in a large representative community sample while incorporating a comprehensive set of

  17. Disentangling the Relationship between Child Maltreatment and Violent Delinquency: Using a Nationally Representative Sample

    Science.gov (United States)

    Yun, Ilhong; Ball, Jeremy D.; Lim, Hyeyoung

    2011-01-01

    This study uses the National Longitudinal Study of Adolescents (Add Health) data, a nationally representative sample of adolescents, to disentangle the relationship between child maltreatment and violent delinquency. Also examined are potential moderating effects of gender, socioeconomic status (SES), and religiosity on the association between…

  18. Structure-based sampling and self-correcting machine learning for accurate calculations of potential energy surfaces and vibrational levels

    Science.gov (United States)

    Dral, Pavlo O.; Owens, Alec; Yurchenko, Sergei N.; Thiel, Walter

    2017-06-01

    We present an efficient approach for generating highly accurate molecular potential energy surfaces (PESs) using self-correcting, kernel ridge regression (KRR) based machine learning (ML). We introduce structure-based sampling to automatically assign nuclear configurations from a pre-defined grid to the training and prediction sets, respectively. Accurate high-level ab initio energies are required only for the points in the training set, while the energies for the remaining points are provided by the ML model with negligible computational cost. The proposed sampling procedure is shown to be superior to random sampling and also eliminates the need for training several ML models. Self-correcting machine learning has been implemented such that each additional layer corrects errors from the previous layer. The performance of our approach is demonstrated in a case study on a published high-level ab initio PES of methyl chloride with 44 819 points. The ML model is trained on sets of different sizes and then used to predict the energies for tens of thousands of nuclear configurations within seconds. The resulting datasets are utilized in variational calculations of the vibrational energy levels of CH3Cl. By using both structure-based sampling and self-correction, the size of the training set can be kept small (e.g., 10% of the points) without any significant loss of accuracy. In ab initio rovibrational spectroscopy, it is thus possible to reduce the number of computationally costly electronic structure calculations through structure-based sampling and self-correcting KRR-based machine learning by up to 90%.

  19. Environmental sampling for trace analysis

    International Nuclear Information System (INIS)

    Markert, B.

    1994-01-01

    Often too little attention is given to the sampling before and after actual instrumental measurement. This leads to errors, despite increasingly sensitive analytical systems. This is one of the first books to pay proper attention to representative sampling. It offers an overview of the most common techniques used today for taking environmental samples. The techniques are clearly presented, yield accurate and reproducible results and can be used to sample -air - water - soil and sediments - plants and animals. A comprehensive handbook, this volume provides an excellent starting point for researchers in the rapidly expanding field of environmental analysis. (orig.)

  20. Spectrally accurate contour dynamics

    International Nuclear Information System (INIS)

    Van Buskirk, R.D.; Marcus, P.S.

    1994-01-01

    We present an exponentially accurate boundary integral method for calculation the equilibria and dynamics of piece-wise constant distributions of potential vorticity. The method represents contours of potential vorticity as a spectral sum and solves the Biot-Savart equation for the velocity by spectrally evaluating a desingularized contour integral. We use the technique in both an initial-value code and a newton continuation method. Our methods are tested by comparing the numerical solutions with known analytic results, and it is shown that for the same amount of computational work our spectral methods are more accurate than other contour dynamics methods currently in use

  1. An active learning representative subset selection method using net analyte signal

    Science.gov (United States)

    He, Zhonghai; Ma, Zhenhe; Luan, Jingmin; Cai, Xi

    2018-05-01

    To guarantee accurate predictions, representative samples are needed when building a calibration model for spectroscopic measurements. However, in general, it is not known whether a sample is representative prior to measuring its concentration, which is both time-consuming and expensive. In this paper, a method to determine whether a sample should be selected into a calibration set is presented. The selection is based on the difference of Euclidean norm of net analyte signal (NAS) vector between the candidate and existing samples. First, the concentrations and spectra of a group of samples are used to compute the projection matrix, NAS vector, and scalar values. Next, the NAS vectors of candidate samples are computed by multiplying projection matrix with spectra of samples. Scalar value of NAS is obtained by norm computation. The distance between the candidate set and the selected set is computed, and samples with the largest distance are added to selected set sequentially. Last, the concentration of the analyte is measured such that the sample can be used as a calibration sample. Using a validation test, it is shown that the presented method is more efficient than random selection. As a result, the amount of time and money spent on reference measurements is greatly reduced.

  2. Ordinary or peculiar men? Comparing the customers of prostitutes with a nationally representative sample of men.

    Science.gov (United States)

    Monto, Martin A; Milrod, Christine

    2014-07-01

    Recent media attention implies that prostitution seeking is widespread, an "ordinary" aspect of masculine sexual behavior. Other accounts suggest that customers are "peculiar," characterized by distinct qualities, perversions, or psychological impairments. Using the nationally representative General Social Survey (GSS), this study demonstrates that prostitution seeking is relatively uncommon. Only about 14% of men in the United States report having ever paid for sex, and only 1% report having done so during the previous year. Furthermore, this study dissects whether customers are ordinary or peculiar by comparing a new sample of active customers who solicit sex on the Internet with an older sample of arrested customers, a sample of customers from the GSS, and a nationally representative sample of noncustomers. The customers of Internet sexual service providers differed greatly from men in general and also from other customers. The remaining samples of customers differed slightly from noncustomers in general. We argue for a balanced perspective that recognizes the significant variety among customers. There is no evidence of a peculiar quality that differentiates customers in general from men who have not paid for sex. © The Author(s) 2013.

  3. Accurate quantification of polycyclic aromatic hydrocarbons in dust samples using microwave-assisted solvent extraction combined with isotope-dilution mass spectrometry

    International Nuclear Information System (INIS)

    Itoh, Nobuyasu; Fushimi, Akihiro; Yarita, Takashi; Aoyagi, Yoshie; Numata, Masahiko

    2011-01-01

    Highlights: → We applied MAE-IDMS for accurate quantification of PAHs in dust samples. → Both partitioning and isotopic equilibria can be achieved using this technique. → MAE-IDMS can provide accurate concentrations even if extraction efficiencies were low. → Characteristics of samples strongly affected for low extraction efficiencies of PAHs. - Abstract: For accurate quantification of polycyclic aromatic hydrocarbons (PAHs) in dust samples, we investigated the use of microwave-assisted solvent extraction (MAE) combined with isotope-dilution mass spectrometry (IDMS) using deuterium-labelled PAHs (D-PAHs). Although MAE with a methanol/toluene mixture (1:3 by volume) at 160 deg. C for 40 min was best for extracting PAHs from tunnel dust among examined, the recovery yields of D-PAHs decreased with increasing molecular weight (<40% for MW ≥ 264; that of deuterium-labelled indeno[123-cd]pyrene (D-IcdP) was only 7.1%). Although the residues were extracted a second time, the observed concentrations did not change dramatically (<5%), and the recovery yields of heavier D-PAHs (i.e., MW ≥ 264) were approximately half of those of the first extract, including D-IcdP (3.4%). These results suggest that both partitioning and isotopic equilibria of PAHs and D-PAHs between sample and solvent were achieved for extractable heavier PAHs under the condition. Thus, the observed concentrations of PAHs obtained by MAE-IDMS were reasonable, even though recovery yields of D-PAHs were <50%. From the results of carbon analyses and extractable contents, lower recovery yields of D-PAHs from the tunnel dust were due to a large content of char with low extractable contents.

  4. Personality factors and suicide risk in a representative sample of the German general population.

    Directory of Open Access Journals (Sweden)

    Victor Blüml

    Full Text Available OBJECTIVE: Previous research has shown an association between certain personality characteristics and suicidality. Methodological differences including small sample sizes and missing adjustment for possible confounding factors could explain the varying results. The aim of this study was to assess the impact of the Big Five personality dimensions on suicidality in a representative population based sample of adults. METHOD: Interviews were conducted in a representative German population-based sample (n=2555 in 2011. Personality characteristics were assessed using the Big Five Inventory-10 (BFI-10 and suicide risk was assessed with the Suicidal Behaviors Questionnaire-Revised (SBQ-R. Multivariate logistic regression models were calculated adjusting for depression, anxiety, and various sociodemographic variables. RESULTS: Neuroticism and openness were significantly associated with suicide risk, while extraversion and conscientiousness were found to be protective. Significant sex differences were observed. For males, extraversion and conscientiousness were protective factors. Neuroticism and openness were found to be associated with suicide risk only in females. These associations remained significant after adjusting for covariates. CONCLUSION: The results highlight the role of personality dimensions as risk factors for suicide-related behaviors. Different personality dimensions are significantly associated with suicide-related behaviors even when adjusting for other known risk factors of suicidality.

  5. Use of Loran-C navigation system to accurately determine sampling site location in an above ground cooling reservoir

    International Nuclear Information System (INIS)

    Lockwood, R.E.; Blankinship, D.R.

    1994-01-01

    Environmental monitoring programs often require accurate determination of sampling site locations in aquatic environments. This is especially true when a open-quotes pictureclose quotes of high resolution is needed for observing a changing variable in a given area and location is assumed to be important to the distribution of that variable. Sample site location can be difficult if few visible land marks are available for reference on a large body of water. The use of navigational systems such as Global Positioning System (GPS) and its predecessor, Loran-C, provide an excellent method for sample site location. McFarland (1992) discusses the practicality of GPS for location determination. This article discusses the use of Loran-C in a sampling scheme implemented at the South Texas Project Electrical Generating Station (STPEGS), Wadsworth, Texas

  6. Development of salt-tolerance interface for an high performance liquid chromatography/inductively coupled plasma mass spectrometry system and its application to accurate quantification of DNA samples.

    Science.gov (United States)

    Takasaki, Yuka; Sakagawa, Shinnosuke; Inagaki, Kazumi; Fujii, Shin-Ichiro; Sabarudin, Akhmad; Umemura, Tomonari; Haraguchi, Hiroki

    2012-02-03

    Accurate quantification of DNA is highly important in various fields. Determination of phosphorus by ICP-MS is one of the most effective methods for accurate quantification of DNA due to the fixed stoichiometry of phosphate to this molecule. In this paper, a smart and reliable method for accurate quantification of DNA fragments and oligodeoxythymidilic acids by hyphenated HPLC/ICP-MS equipped with a highly efficient interface device is presented. The interface was constructed of a home-made capillary-attached micronebulizer and temperature-controllable cyclonic spray chamber (IsoMist). As a separation column for DNA samples, home-made methacrylate-based weak anion-exchange monolith was employed. Some parameters, which include composition of mobile phase, gradient program, inner and outer diameters of capillary, temperature of spray chamber etc., were optimized to find the best performance for separation and accurate quantification of DNA samples. The proposed system could achieve many advantages, such as total consumption for small amount sample analysis, salt-tolerance for hyphenated analysis, high accuracy and precision for quantitative analysis. Using this proposed system, the samples of 20 bp DNA ladder (20, 40, 60, 80, 100, 120, 140, 160, 180, 200, 300, 400, 500 base pairs) and oligodeoxythymidilic acids (dT(12-18)) were rapidly separated and accurately quantified. Copyright © 2011 Elsevier B.V. All rights reserved.

  7. High throughput and accurate serum proteome profiling by integrated sample preparation technology and single-run data independent mass spectrometry analysis.

    Science.gov (United States)

    Lin, Lin; Zheng, Jiaxin; Yu, Quan; Chen, Wendong; Xing, Jinchun; Chen, Chenxi; Tian, Ruijun

    2018-03-01

    Mass spectrometry (MS)-based serum proteome analysis is extremely challenging due to its high complexity and dynamic range of protein abundances. Developing high throughput and accurate serum proteomic profiling approach capable of analyzing large cohorts is urgently needed for biomarker discovery. Herein, we report a streamlined workflow for fast and accurate proteomic profiling from 1μL of blood serum. The workflow combined an integrated technique for highly sensitive and reproducible sample preparation and a new data-independent acquisition (DIA)-based MS method. Comparing with standard data dependent acquisition (DDA) approach, the optimized DIA method doubled the number of detected peptides and proteins with better reproducibility. Without protein immunodepletion and prefractionation, the single-run DIA analysis enables quantitative profiling of over 300 proteins with 50min gradient time. The quantified proteins span more than five orders of magnitude of abundance range and contain over 50 FDA-approved disease markers. The workflow allowed us to analyze 20 serum samples per day, with about 358 protein groups per sample being identified. A proof-of-concept study on renal cell carcinoma (RCC) serum samples confirmed the feasibility of the workflow for large scale serum proteomic profiling and disease-related biomarker discovery. Blood serum or plasma is the predominant specimen for clinical proteomic studies while the analysis is extremely challenging for its high complexity. Many efforts had been made in the past for serum proteomics for maximizing protein identifications, whereas few have been concerned with throughput and reproducibility. Here, we establish a rapid, robust and high reproducible DIA-based workflow for streamlined serum proteomic profiling from 1μL serum. The workflow doesn't need protein depletion and pre-fractionation, while still being able to detect disease-relevant proteins accurately. The workflow is promising in clinical application

  8. Socioeconomic Determinants of Bullying in the Workplace: A National Representative Sample in Japan

    OpenAIRE

    Tsuno, Kanami; Kawakami, Norito; Tsutsumi, Akizumi; Shimazu, Akihito; Inoue, Akiomi; Odagiri, Yuko; Yoshikawa, Toru; Haratani, Takashi; Shimomitsu, Teruichi; Kawachi, Ichiro

    2015-01-01

    Bullying in the workplace is an increasingly recognized threat to employee health. We sought to test three hypotheses related to the determinants of workplace bullying: power distance at work; safety climate; and frustration related to perceived social inequality. A questionnaire survey was administered to a nationally representative community-based sample of 5,000 residents in Japan aged 20-60 years. The questionnaire included questions about employment, occupation, company size, education, ...

  9. Examination of Hydrate Formation Methods: Trying to Create Representative Samples

    Energy Technology Data Exchange (ETDEWEB)

    Kneafsey, T.J.; Rees, E.V.L.; Nakagawa, S.; Kwon, T.-H.

    2011-04-01

    Forming representative gas hydrate-bearing laboratory samples is important so that the properties of these materials may be measured, while controlling the composition and other variables. Natural samples are rare, and have often experienced pressure and temperature changes that may affect the property to be measured [Waite et al., 2008]. Forming methane hydrate samples in the laboratory has been done a number of ways, each having advantages and disadvantages. The ice-to-hydrate method [Stern et al., 1996], contacts melting ice with methane at the appropriate pressure to form hydrate. The hydrate can then be crushed and mixed with mineral grains under controlled conditions, and then compacted to create laboratory samples of methane hydrate in a mineral medium. The hydrate in these samples will be part of the load-bearing frame of the medium. In the excess gas method [Handa and Stupin, 1992], water is distributed throughout a mineral medium (e.g. packed moist sand, drained sand, moistened silica gel, other porous media) and the mixture is brought to hydrate-stable conditions (chilled and pressurized with gas), allowing hydrate to form. This method typically produces grain-cementing hydrate from pendular water in sand [Waite et al., 2004]. In the dissolved gas method [Tohidi et al., 2002], water with sufficient dissolved guest molecules is brought to hydrate-stable conditions where hydrate forms. In the laboratory, this is can be done by pre-dissolving the gas of interest in water and then introducing it to the sample under the appropriate conditions. With this method, it is easier to form hydrate from more soluble gases such as carbon dioxide. It is thought that this method more closely simulates the way most natural gas hydrate has formed. Laboratory implementation, however, is difficult, and sample formation is prohibitively time consuming [Minagawa et al., 2005; Spangenberg and Kulenkampff, 2005]. In another version of this technique, a specified quantity of gas

  10. Alpha Matting with KL-Divergence Based Sparse Sampling.

    Science.gov (United States)

    Karacan, Levent; Erdem, Aykut; Erdem, Erkut

    2017-06-22

    In this paper, we present a new sampling-based alpha matting approach for the accurate estimation of foreground and background layers of an image. Previous sampling-based methods typically rely on certain heuristics in collecting representative samples from known regions, and thus their performance deteriorates if the underlying assumptions are not satisfied. To alleviate this, we take an entirely new approach and formulate sampling as a sparse subset selection problem where we propose to pick a small set of candidate samples that best explains the unknown pixels. Moreover, we describe a new dissimilarity measure for comparing two samples which is based on KLdivergence between the distributions of features extracted in the vicinity of the samples. The proposed framework is general and could be easily extended to video matting by additionally taking temporal information into account in the sampling process. Evaluation on standard benchmark datasets for image and video matting demonstrates that our approach provides more accurate results compared to the state-of-the-art methods.

  11. Patterns of Childhood Abuse and Neglect in a Representative German Population Sample.

    Directory of Open Access Journals (Sweden)

    Christoph Schilling

    Full Text Available Different types of childhood maltreatment, like emotional abuse, emotional neglect, physical abuse, physical neglect and sexual abuse are interrelated because of their co-occurrence. Different patterns of childhood abuse and neglect are associated with the degree of severity of mental disorders in adulthood. The purpose of this study was (a to identify different patterns of childhood maltreatment in a representative German community sample, (b to replicate the patterns of childhood neglect and abuse recently found in a clinical German sample, (c to examine whether participants reporting exposure to specific patterns of child maltreatment would report different levels of psychological distress, and (d to compare the results of the typological approach and the results of a cumulative risk model based on our data set.In a cross-sectional survey conducted in 2010, a representative random sample of 2504 German participants aged between 14 and 92 years completed the Childhood Trauma Questionnaire (CTQ. General anxiety and depression were assessed by standardized questionnaires (GAD-2, PHQ-2. Cluster analysis was conducted with the CTQ-subscales to identify different patterns of childhood maltreatment.Three different patterns of childhood abuse and neglect could be identified by cluster analysis. Cluster one showed low values on all CTQ-scales. Cluster two showed high values in emotional and physical neglect. Only cluster three showed high values in physical and sexual abuse. The three patterns of childhood maltreatment showed different degrees of depression (PHQ-2 and anxiety (GAD-2. Cluster one showed lowest levels of psychological distress, cluster three showed highest levels of mental distress.The results show that different types of childhood maltreatment are interrelated and can be grouped into specific patterns of childhood abuse and neglect, which are associated with differing severity of psychological distress in adulthood. The results

  12. Patterns of Childhood Abuse and Neglect in a Representative German Population Sample

    Science.gov (United States)

    Schilling, Christoph; Weidner, Kerstin; Brähler, Elmar; Glaesmer, Heide; Häuser, Winfried; Pöhlmann, Karin

    2016-01-01

    Background Different types of childhood maltreatment, like emotional abuse, emotional neglect, physical abuse, physical neglect and sexual abuse are interrelated because of their co-occurrence. Different patterns of childhood abuse and neglect are associated with the degree of severity of mental disorders in adulthood. The purpose of this study was (a) to identify different patterns of childhood maltreatment in a representative German community sample, (b) to replicate the patterns of childhood neglect and abuse recently found in a clinical German sample, (c) to examine whether participants reporting exposure to specific patterns of child maltreatment would report different levels of psychological distress, and (d) to compare the results of the typological approach and the results of a cumulative risk model based on our data set. Methods In a cross-sectional survey conducted in 2010, a representative random sample of 2504 German participants aged between 14 and 92 years completed the Childhood Trauma Questionnaire (CTQ). General anxiety and depression were assessed by standardized questionnaires (GAD-2, PHQ-2). Cluster analysis was conducted with the CTQ-subscales to identify different patterns of childhood maltreatment. Results Three different patterns of childhood abuse and neglect could be identified by cluster analysis. Cluster one showed low values on all CTQ-scales. Cluster two showed high values in emotional and physical neglect. Only cluster three showed high values in physical and sexual abuse. The three patterns of childhood maltreatment showed different degrees of depression (PHQ-2) and anxiety (GAD-2). Cluster one showed lowest levels of psychological distress, cluster three showed highest levels of mental distress. Conclusion The results show that different types of childhood maltreatment are interrelated and can be grouped into specific patterns of childhood abuse and neglect, which are associated with differing severity of psychological distress in

  13. Problematic Social Media Use: Results from a Large-Scale Nationally Representative Adolescent Sample.

    Science.gov (United States)

    Bányai, Fanni; Zsila, Ágnes; Király, Orsolya; Maraz, Aniko; Elekes, Zsuzsanna; Griffiths, Mark D; Andreassen, Cecilie Schou; Demetrovics, Zsolt

    2017-01-01

    Despite social media use being one of the most popular activities among adolescents, prevalence estimates among teenage samples of social media (problematic) use are lacking in the field. The present study surveyed a nationally representative Hungarian sample comprising 5,961 adolescents as part of the European School Survey Project on Alcohol and Other Drugs (ESPAD). Using the Bergen Social Media Addiction Scale (BSMAS) and based on latent profile analysis, 4.5% of the adolescents belonged to the at-risk group, and reported low self-esteem, high level of depression symptoms, and elevated social media use. Results also demonstrated that BSMAS has appropriate psychometric properties. It is concluded that adolescents at-risk of problematic social media use should be targeted by school-based prevention and intervention programs.

  14. Intergenerational Transmission of Marital Violence: Results From a Nationally Representative Sample of Men.

    Science.gov (United States)

    Murshid, Nadine Shaanta; Murshid, Navine

    2015-09-16

    The present study assesses the association between childhood exposure to parental violence and perpetration of marital violence as adults among a representative sample of 3,396 men in Bangladesh. We used secondary analysis of survey data from the nationally representative Bangladesh Demographic and Health Survey 2007 to examine factors associated with perpetration of martial violence among 3,396 ever-married men between the ages of 16 and 50 years. Outcome measure, marital violence perpetration, was measured using a modified Conflict Tactics Scale, and predictor variables included childhood exposure to parental violence, justification of marital violence, marital duration, religion, and demographic variables. Results indicate that marital violence perpetration is significantly associated with childhood exposure to marital violence, suggesting a cycle of violence that is maintained across generations. Implications for policy and practice are discussed. © The Author(s) 2015.

  15. Radial line-scans as representative sampling strategy in dried-droplet laser ablation of liquid samples deposited on pre-cut filter paper disks

    Energy Technology Data Exchange (ETDEWEB)

    Nischkauer, Winfried [Institute of Chemical Technologies and Analytics, Vienna University of Technology, Vienna (Austria); Department of Analytical Chemistry, Ghent University, Ghent (Belgium); Vanhaecke, Frank [Department of Analytical Chemistry, Ghent University, Ghent (Belgium); Bernacchi, Sébastien; Herwig, Christoph [Institute of Chemical Engineering, Vienna University of Technology, Vienna (Austria); Limbeck, Andreas, E-mail: Andreas.Limbeck@tuwien.ac.at [Institute of Chemical Technologies and Analytics, Vienna University of Technology, Vienna (Austria)

    2014-11-01

    Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL{sup −1} with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with

  16. Representative Delay Measurements (RDM: Facing the Challenge of Modern Networks

    Directory of Open Access Journals (Sweden)

    Joachim Fabini

    2015-02-01

    Full Text Available Network access technologies have evolved significantly in the last years. They deploy novel mechanisms like reactive capacity allocation and time-slotted operation to optimize overall network capacity. From a single node's perspective, such optimizations decrease network determinism and measurement repeatability. Evolving application fields like machine to machine (M2M communications or real-time gaming often have strict real-time requirements to operate correctly. Highly accurate delay measurements are necessary to monitor network compliance with application demands or to detect deviations of normal network behavior, which may be caused by network failures, misconfigurations or attacks. This paper analyzes factors that challenge active delay measurements in modern networks. It introduces the Representative Delay Measurement tool (RDM that addresses these factors and proposes solutions that conform to requirements of the recently published RFC7312. Delay measurement results acquired using RDM in live networks confirm that advanced measurement methods can significantly improve the quality of measurement samples by isolating systematic network behavior. The resulting high-quality samples are one prerequisite for accurate statistics that support proper operation of subsequent algorithms and applications.

  17. Problematic Social Media Use: Results from a Large-Scale Nationally Representative Adolescent Sample.

    Directory of Open Access Journals (Sweden)

    Fanni Bányai

    Full Text Available Despite social media use being one of the most popular activities among adolescents, prevalence estimates among teenage samples of social media (problematic use are lacking in the field. The present study surveyed a nationally representative Hungarian sample comprising 5,961 adolescents as part of the European School Survey Project on Alcohol and Other Drugs (ESPAD. Using the Bergen Social Media Addiction Scale (BSMAS and based on latent profile analysis, 4.5% of the adolescents belonged to the at-risk group, and reported low self-esteem, high level of depression symptoms, and elevated social media use. Results also demonstrated that BSMAS has appropriate psychometric properties. It is concluded that adolescents at-risk of problematic social media use should be targeted by school-based prevention and intervention programs.

  18. The Paternal Landscape along the Bight of Benin - Testing Regional Representativeness of West-African Population Samples Using Y-Chromosomal Markers.

    Directory of Open Access Journals (Sweden)

    Maarten H D Larmuseau

    Full Text Available Patterns of genetic variation in human populations across the African continent are still not well studied in comparison with Eurasia and America, despite the high genetic and cultural diversity among African populations. In population and forensic genetic studies a single sample is often used to represent a complete African region. In such a scenario, inappropriate sampling strategies and/or the use of local, isolated populations may bias interpretations and pose questions of representativeness at a macrogeographic-scale. The non-recombining region of the Y-chromosome (NRY has great potential to reveal the regional representation of a sample due to its powerful phylogeographic information content. An area poorly characterized for Y-chromosomal data is the West-African region along the Bight of Benin, despite its important history in the trans-Atlantic slave trade and its large number of ethnic groups, languages and lifestyles. In this study, Y-chromosomal haplotypes from four Beninese populations were determined and a global meta-analysis with available Y-SNP and Y-STR data from populations along the Bight of Benin and surrounding areas was performed. A thorough methodology was developed allowing comparison of population samples using Y-chromosomal lineage data based on different Y-SNP panels and phylogenies. Geographic proximity turned out to be the best predictor of genetic affinity between populations along the Bight of Benin. Nevertheless, based on Y-chromosomal data from the literature two population samples differed strongly from others from the same or neighbouring areas and are not regionally representative within large-scale studies. Furthermore, the analysis of the HapMap sample YRI of a Yoruban population from South-western Nigeria based on Y-SNPs and Y-STR data showed for the first time its regional representativeness, a result which is important for standard population and forensic genetic applications using the YRI sample

  19. MAFsnp: A Multi-Sample Accurate and Flexible SNP Caller Using Next-Generation Sequencing Data

    Science.gov (United States)

    Hu, Jiyuan; Li, Tengfei; Xiu, Zidi; Zhang, Hong

    2015-01-01

    Most existing statistical methods developed for calling single nucleotide polymorphisms (SNPs) using next-generation sequencing (NGS) data are based on Bayesian frameworks, and there does not exist any SNP caller that produces p-values for calling SNPs in a frequentist framework. To fill in this gap, we develop a new method MAFsnp, a Multiple-sample based Accurate and Flexible algorithm for calling SNPs with NGS data. MAFsnp is based on an estimated likelihood ratio test (eLRT) statistic. In practical situation, the involved parameter is very close to the boundary of the parametric space, so the standard large sample property is not suitable to evaluate the finite-sample distribution of the eLRT statistic. Observing that the distribution of the test statistic is a mixture of zero and a continuous part, we propose to model the test statistic with a novel two-parameter mixture distribution. Once the parameters in the mixture distribution are estimated, p-values can be easily calculated for detecting SNPs, and the multiple-testing corrected p-values can be used to control false discovery rate (FDR) at any pre-specified level. With simulated data, MAFsnp is shown to have much better control of FDR than the existing SNP callers. Through the application to two real datasets, MAFsnp is also shown to outperform the existing SNP callers in terms of calling accuracy. An R package “MAFsnp” implementing the new SNP caller is freely available at http://homepage.fudan.edu.cn/zhangh/softwares/. PMID:26309201

  20. A study on the representative sampling survey for the inspection of the clearance level for the radioisotope waste

    International Nuclear Information System (INIS)

    Hong Joo Ahn; Se Chul Sohn; Kwang Yong Jee; Ju Youl Kim; In Koo Lee

    2007-01-01

    Utilization facilities for radioisotope (RI) are increasing annually in South Korea, and the total number was 2,723, as of December 31, 2005. The inspection of a clearance level is a very important problem in order to ensure a social reliance for releasing radioactive materials to the environment. Korean regulations for such a clearance are described in Notice No. 2001-30 of the Ministry of Science and Technology (MOST) and Notice No. 2002-67 of the Ministry of Commerce, Industry and Energy (MOCIE). Most unsealed sources in RI waste drums at a storage facility are low-level beta-emitters with short half-lives, so it is impossible to measure their inventories by a nondestructive analysis. Furthermore, RI wastes generated from hospital, educational and research institutes and industry have a heterogeneous, multiple, irregular, and a small quantity of a waste stream. This study addresses a representative (master) sampling survey and analysis plan for RI wastes because a complete enumeration of waste drums is impossible and not desirable in terms of a cost and efficiency. The existing approaches to a representative sampling include a judgmental, simple random, stratified random, systematic grid, systematic random, composite, and adaptive sampling. A representative sampling plan may combine two or more of the above sampling approaches depending on the type and distribution of a waste stream. Stratified random sampling (constrained randomization) is proven to be adequate for a sampling design of a RI waste regarding a half-life, surface dose, undertaking time to a storage facility, and type of waste. The developed sampling protocol includes estimating the number of drums within a waste stream, estimating the number of samples, and a confirmation of the required number of samples. The statistical process control for a quality assurance plan includes control charts and an upper control limit (UCL) of 95% to determine whether a clearance level is met or not. (authors)

  1. Chapter 2: Sampling strategies in forest hydrology and biogeochemistry

    Science.gov (United States)

    Roger C. Bales; Martha H. Conklin; Branko Kerkez; Steven Glaser; Jan W. Hopmans; Carolyn T. Hunsaker; Matt Meadows; Peter C. Hartsough

    2011-01-01

    Many aspects of forest hydrology have been based on accurate but not necessarily spatially representative measurements, reflecting the measurement capabilities that were traditionally available. Two developments are bringing about fundamental changes in sampling strategies in forest hydrology and biogeochemistry: (a) technical advances in measurement capability, as is...

  2. Representative process sampling for reliable data analysis

    DEFF Research Database (Denmark)

    Julius, Lars Petersen; Esbensen, Kim

    2005-01-01

    (sampling variances) can be reduced greatly however, and sampling biases can be eliminated completely, by respecting a simple set of rules and guidelines provided by TOS. A systematic approach for description of process heterogeneity furnishes in-depth knowledge about the specific variability of any 1-D lot...

  3. Iterative Adaptive Sampling For Accurate Direct Illumination

    National Research Council Canada - National Science Library

    Donikian, Michael

    2004-01-01

    This thesis introduces a new multipass algorithm, Iterative Adaptive Sampling, for efficiently computing the direct illumination in scenes with many lights, including area lights that cause realistic soft shadows...

  4. An individual urinary proteome analysis in normal human beings to define the minimal sample number to represent the normal urinary proteome

    Directory of Open Access Journals (Sweden)

    Liu Xuejiao

    2012-11-01

    Full Text Available Abstract Background The urinary proteome has been widely used for biomarker discovery. A urinary proteome database from normal humans can provide a background for discovery proteomics and candidate proteins/peptides for targeted proteomics. Therefore, it is necessary to define the minimum number of individuals required for sampling to represent the normal urinary proteome. Methods In this study, inter-individual and inter-gender variations of urinary proteome were taken into consideration to achieve a representative database. An individual analysis was performed on overnight urine samples from 20 normal volunteers (10 males and 10 females by 1DLC/MS/MS. To obtain a representative result of each sample, a replicate 1DLCMS/MS analysis was performed. The minimal sample number was estimated by statistical analysis. Results For qualitative analysis, less than 5% of new proteins/peptides were identified in a male/female normal group by adding a new sample when the sample number exceeded nine. In addition, in a normal group, the percentage of newly identified proteins/peptides was less than 5% upon adding a new sample when the sample number reached 10. Furthermore, a statistical analysis indicated that urinary proteomes from normal males and females showed different patterns. For quantitative analysis, the variation of protein abundance was defined by spectrum count and western blotting methods. And then the minimal sample number for quantitative proteomic analysis was identified. Conclusions For qualitative analysis, when considering the inter-individual and inter-gender variations, the minimum sample number is 10 and requires a balanced number of males and females in order to obtain a representative normal human urinary proteome. For quantitative analysis, the minimal sample number is much greater than that for qualitative analysis and depends on the experimental methods used for quantification.

  5. Associations among School Characteristics and Foodservice Practices in a Nationally Representative Sample of United States Schools

    Science.gov (United States)

    Thomson, Jessica L.; Tussing-Humphreys, Lisa M.; Martin, Corby K.; LeBlanc, Monique M.; Onufrak, Stephen J.

    2012-01-01

    Objective: Determine school characteristics associated with healthy/unhealthy food service offerings or healthy food preparation practices. Design: Secondary analysis of cross-sectional data. Setting: Nationally representative sample of public and private elementary, middle, and high schools. Participants: Data from the 2006 School Health Policies…

  6. When Is Network Lasso Accurate?

    Directory of Open Access Journals (Sweden)

    Alexander Jung

    2018-01-01

    Full Text Available The “least absolute shrinkage and selection operator” (Lasso method has been adapted recently for network-structured datasets. In particular, this network Lasso method allows to learn graph signals from a small number of noisy signal samples by using the total variation of a graph signal for regularization. While efficient and scalable implementations of the network Lasso are available, only little is known about the conditions on the underlying network structure which ensure network Lasso to be accurate. By leveraging concepts of compressed sensing, we address this gap and derive precise conditions on the underlying network topology and sampling set which guarantee the network Lasso for a particular loss function to deliver an accurate estimate of the entire underlying graph signal. We also quantify the error incurred by network Lasso in terms of two constants which reflect the connectivity of the sampled nodes.

  7. Accurate Digital Polymerase Chain Reaction Quantification of Challenging Samples Applying Inhibitor-Tolerant DNA Polymerases.

    Science.gov (United States)

    Sidstedt, Maja; Romsos, Erica L; Hedell, Ronny; Ansell, Ricky; Steffen, Carolyn R; Vallone, Peter M; Rådström, Peter; Hedman, Johannes

    2017-02-07

    Digital PCR (dPCR) enables absolute quantification of nucleic acids by partitioning of the sample into hundreds or thousands of minute reactions. By assuming a Poisson distribution for the number of DNA fragments present in each chamber, the DNA concentration is determined without the need for a standard curve. However, when analyzing nucleic acids from complex matrixes such as soil and blood, the dPCR quantification can be biased due to the presence of inhibitory compounds. In this study, we evaluated the impact of varying the DNA polymerase in chamber-based dPCR for both pure and impure samples using the common PCR inhibitor humic acid (HA) as a model. We compared the TaqMan Universal PCR Master Mix with two alternative DNA polymerases: ExTaq HS and Immolase. By using Bayesian modeling, we show that there is no difference among the tested DNA polymerases in terms of accuracy of absolute quantification for pure template samples, i.e., without HA present. For samples containing HA, there were great differences in performance: the TaqMan Universal PCR Master Mix failed to correctly quantify DNA with more than 13 pg/nL HA, whereas Immolase (1 U) could handle up to 375 pg/nL HA. Furthermore, we found that BSA had a moderate positive effect for the TaqMan Universal PCR Master Mix, enabling accurate quantification for 25 pg/nL HA. Increasing the amount of DNA polymerase from 1 to 5 U had a strong effect for ExTaq HS, elevating HA-tolerance four times. We also show that the average Cq values of positive reactions may be used as a measure of inhibition effects, e.g., to determine whether or not a dPCR quantification result is reliable. The statistical models developed to objectively analyze the data may also be applied in quality control. We conclude that the choice of DNA polymerase in dPCR is crucial for the accuracy of quantification when analyzing challenging samples.

  8. Assessing representativeness of sampling methods for reaching men who have sex with men: a direct comparison of results obtained from convenience and probability samples.

    Science.gov (United States)

    Schwarcz, Sandra; Spindler, Hilary; Scheer, Susan; Valleroy, Linda; Lansky, Amy

    2007-07-01

    Convenience samples are used to determine HIV-related behaviors among men who have sex with men (MSM) without measuring the extent to which the results are representative of the broader MSM population. We compared results from a cross-sectional survey of MSM recruited from gay bars between June and October 2001 to a random digit dial telephone survey conducted between June 2002 and January 2003. The men in the probability sample were older, better educated, and had higher incomes than men in the convenience sample, the convenience sample enrolled more employed men and men of color. Substance use around the time of sex was higher in the convenience sample but other sexual behaviors were similar. HIV testing was common among men in both samples. Periodic validation, through comparison of data collected by different sampling methods, may be useful when relying on survey data for program and policy development.

  9. Measuring the gut microbiome in birds: Comparison of faecal and cloacal sampling.

    Science.gov (United States)

    Videvall, Elin; Strandh, Maria; Engelbrecht, Anel; Cloete, Schalk; Cornwallis, Charlie K

    2018-05-01

    The gut microbiomes of birds and other animals are increasingly being studied in ecological and evolutionary contexts. Numerous studies on birds and reptiles have made inferences about gut microbiota using cloacal sampling; however, it is not known whether the bacterial community of the cloaca provides an accurate representation of the gut microbiome. We examined the accuracy with which cloacal swabs and faecal samples measure the microbiota in three different parts of the gastrointestinal tract (ileum, caecum, and colon) using a case study on juvenile ostriches, Struthio camelus, and high-throughput 16S rRNA sequencing. We found that faeces were significantly better than cloacal swabs in representing the bacterial community of the colon. Cloacal samples had a higher abundance of Gammaproteobacteria and fewer Clostridia relative to the gut and faecal samples. However, both faecal and cloacal samples were poor representatives of the microbial communities in the caecum and ileum. Furthermore, the accuracy of each sampling method in measuring the abundance of different bacterial taxa was highly variable: Bacteroidetes was the most highly correlated phylum between all three gut sections and both methods, whereas Actinobacteria, for example, was only strongly correlated between faecal and colon samples. Based on our results, we recommend sampling faeces, whenever possible, as this sample type provides the most accurate assessment of the colon microbiome. The fact that neither sampling technique accurately portrayed the bacterial community of the ileum nor the caecum illustrates the difficulty in noninvasively monitoring gut bacteria located further up in the gastrointestinal tract. These results have important implications for the interpretation of avian gut microbiome studies. © 2017 John Wiley & Sons Ltd.

  10. Predictors of type 2 diabetes in a nationally representative sample of adults with psychosis

    OpenAIRE

    Foley, Debra L; Mackinnon, Andrew; Morgan, Vera A; Watts, Gerald F; McGrath, John J; Castle, David J; Waterreus, Anna; Galletly, Cherrie A

    2014-01-01

    Antipsychotic drugs such as clozapine and olanzapine are associated with an increased risk for type 2 diabetes, but relatively little is known about the relationship between risk factors for type 2 diabetes established in the general population and type 2 diabetes in people with psychosis. We estimated the prevalence of established risk factors and their association with type 2 diabetes in a nationally representative sample of people with an ICD-10 psychosis (N=1642) who gave a fasting blood ...

  11. Ethnic Variations of Pathways Linking Socioeconomic Status, Parenting, and Preacademic Skills in a Nationally Representative Sample

    Science.gov (United States)

    Iruka, Iheoma U.; Dotterer, Aryn M.; Pungello, Elizabeth P.

    2014-01-01

    Research Findings: Grounded in the investment model and informed by the integrative theory of the study of minority children, this study used the Early Childhood Longitudinal Study-Birth Cohort data set, a nationally representative sample of young children, to investigate whether the association between socioeconomic status (family income and…

  12. Fast Physically Accurate Rendering of Multimodal Signatures of Distributed Fracture in Heterogeneous Materials.

    Science.gov (United States)

    Visell, Yon

    2015-04-01

    This paper proposes a fast, physically accurate method for synthesizing multimodal, acoustic and haptic, signatures of distributed fracture in quasi-brittle heterogeneous materials, such as wood, granular media, or other fiber composites. Fracture processes in these materials are challenging to simulate with existing methods, due to the prevalence of large numbers of disordered, quasi-random spatial degrees of freedom, representing the complex physical state of a sample over the geometric volume of interest. Here, I develop an algorithm for simulating such processes, building on a class of statistical lattice models of fracture that have been widely investigated in the physics literature. This algorithm is enabled through a recently published mathematical construction based on the inverse transform method of random number sampling. It yields a purely time domain stochastic jump process representing stress fluctuations in the medium. The latter can be readily extended by a mean field approximation that captures the averaged constitutive (stress-strain) behavior of the material. Numerical simulations and interactive examples demonstrate the ability of these algorithms to generate physically plausible acoustic and haptic signatures of fracture in complex, natural materials interactively at audio sampling rates.

  13. Groundwater recharge: Accurately representing evapotranspiration

    CSIR Research Space (South Africa)

    Bugan, Richard DH

    2011-09-01

    Full Text Available of solutes in unsaturated, partially saturated and fully saturated porous media (Simunek et al., 1999). It uses Richards' equation for variably-saturated water flow and the convection-dispersion equations for heat and solute transport, based on Fick?s Law... be of irregular shape and having non-uniform soil with a prescribed degree of anisotropy. Water flow can occur in the vertical plane, horizontal plane or radially on both sides of a vertical axis of symmetry. The boundaries of the system can be set at constant...

  14. The Stages of Change in Smoking Cessation in a Representative Sample of Korean Adult Smokers

    OpenAIRE

    Jhun, Hyung-Joon; Seo, Hong-Gwan

    2006-01-01

    This study reports the stages of change in smoking cessation in a representative sample of Korean adult smokers. The study subjects, all adult smokers (n=2,422), were recruited from the second Korea National Health and Nutrition Examination Survey conducted in 2001. The stages of change were categorized using demographic (age and sex), socioeconomic (education, residence, and household income), and smoking characteristics (age at smoking onset, duration of smoking, and number of cigarettes sm...

  15. Use of reference samples for more accurate RBS analyses

    International Nuclear Information System (INIS)

    Lanford, W.A.; Pelicon, P.; Zorko, B.; Budnar, M.

    2002-01-01

    While one of the primary assets of RBS analysis is that it is quantitative without use of reference samples, for certain types of analyses the precision of the method can be improved by measuring RBS spectra of unknowns relative to the RBS spectra of a similar known sample. The advantage of such an approach is that one can reduce (or eliminate) the uncertainties that arise from error in the detector solid angle, beam current integration efficiency, scattering cross-section, and stopping powers. We have used this approach extensively to determine the composition (x) of homogeneous thin films of TaN x using as reference samples films of pure Ta. Our approach is to measure R=(Ta count) unknown /(Ta count) standard and use RUMP to determine the function x(R). Once the function x(R) has been determined, this approach makes it easy to analyze many samples quickly. Other analyses for which this approach has proved useful are determination of the composition (x) of WN x , SiO x H y and SiN x H y , using W, SiO 2 and amorphous Si as reference samples, respectively

  16. Sampling and sample processing in pesticide residue analysis.

    Science.gov (United States)

    Lehotay, Steven J; Cook, Jo Marie

    2015-05-13

    Proper sampling and sample processing in pesticide residue analysis of food and soil have always been essential to obtain accurate results, but the subject is becoming a greater concern as approximately 100 mg test portions are being analyzed with automated high-throughput analytical methods by agrochemical industry and contract laboratories. As global food trade and the importance of monitoring increase, the food industry and regulatory laboratories are also considering miniaturized high-throughput methods. In conjunction with a summary of the symposium "Residues in Food and Feed - Going from Macro to Micro: The Future of Sample Processing in Residue Analytical Methods" held at the 13th IUPAC International Congress of Pesticide Chemistry, this is an opportune time to review sampling theory and sample processing for pesticide residue analysis. If collected samples and test portions do not adequately represent the actual lot from which they came and provide meaningful results, then all costs, time, and efforts involved in implementing programs using sophisticated analytical instruments and techniques are wasted and can actually yield misleading results. This paper is designed to briefly review the often-neglected but crucial topic of sample collection and processing and put the issue into perspective for the future of pesticide residue analysis. It also emphasizes that analysts should demonstrate the validity of their sample processing approaches for the analytes/matrices of interest and encourages further studies on sampling and sample mass reduction to produce a test portion.

  17. Generalized weighted ratio method for accurate turbidity measurement over a wide range.

    Science.gov (United States)

    Liu, Hongbo; Yang, Ping; Song, Hong; Guo, Yilu; Zhan, Shuyue; Huang, Hui; Wang, Hangzhou; Tao, Bangyi; Mu, Quanquan; Xu, Jing; Li, Dejun; Chen, Ying

    2015-12-14

    Turbidity measurement is important for water quality assessment, food safety, medicine, ocean monitoring, etc. In this paper, a method that accurately estimates the turbidity over a wide range is proposed, where the turbidity of the sample is represented as a weighted ratio of the scattered light intensities at a series of angles. An improvement in the accuracy is achieved by expanding the structure of the ratio function, thus adding more flexibility to the turbidity-intensity fitting. Experiments have been carried out with an 850 nm laser and a power meter fixed on a turntable to measure the light intensity at different angles. The results show that the relative estimation error of the proposed method is 0.58% on average for a four-angle intensity combination for all test samples with a turbidity ranging from 160 NTU to 4000 NTU.

  18. Accurate determination of sulfur in gasoline and related fuel samples using isotope dilution ICP-MS with direct sample injection and microwave-assisted digestion.

    Science.gov (United States)

    Heilmann, Jens; Boulyga, Sergei F; Heumann, Klaus G

    2004-09-01

    Inductively coupled plasma isotope-dilution mass spectrometry (ICP-IDMS) with direct injection of isotope-diluted samples into the plasma, using a direct injection high-efficiency nebulizer (DIHEN), was applied for accurate sulfur determinations in sulfur-free premium gasoline, gas oil, diesel fuel, and heating oil. For direct injection a micro-emulsion consisting of the corresponding organic sample and an aqueous 34S-enriched spike solution with additions of tetrahydronaphthalene and Triton X-100, was prepared. The ICP-MS parameters were optimized with respect to high sulfur ion intensities, low mass-bias values, and high precision of 32S/34S ratio measurements. For validation of the DIHEN-ICP-IDMS method two certified gas oil reference materials (BCR 107 and BCR 672) were analyzed. For comparison a wet-chemical ICP-IDMS method was applied with microwave-assisted digestion using decomposition of samples in a closed quartz vessel inserted into a normal microwave system. The results from both ICP-IDMS methods agree well with the certified values of the reference materials and also with each other for analyses of other samples. However, the standard deviation of DIHEN-ICP-IDMS was about a factor of two higher (5-6% RSD at concentration levels above 100 mircog g(-1)) compared with those of wet-chemical ICP-IDMS, mainly due to inhomogeneities of the micro-emulsion, which causes additional plasma instabilities. Detection limits of 4 and 18 microg g(-1) were obtained for ICP-IDMS in connection with microwave-assisted digestion and DIHEN-ICP-IDMS, respectively, with a sulfur background of the used Milli-Q water as the main limiting factor for both methods.

  19. Accurate determination of sulfur in gasoline and related fuel samples using isotope dilution ICP-MS with direct sample injection and microwave-assisted digestion

    Energy Technology Data Exchange (ETDEWEB)

    Heilmann, Jens; Boulyga, Sergei F.; Heumann, Klaus G. [Johannes Gutenberg-University, Institute of Inorganic Chemistry and Analytical Chemistry, Mainz (Germany)

    2004-09-01

    Inductively coupled plasma isotope-dilution mass spectrometry (ICP-IDMS) with direct injection of isotope-diluted samples into the plasma, using a direct injection high-efficiency nebulizer (DIHEN), was applied for accurate sulfur determinations in sulfur-free premium gasoline, gas oil, diesel fuel, and heating oil. For direct injection a micro-emulsion consisting of the corresponding organic sample and an aqueous {sup 34}S-enriched spike solution with additions of tetrahydronaphthalene and Triton X-100, was prepared. The ICP-MS parameters were optimized with respect to high sulfur ion intensities, low mass-bias values, and high precision of {sup 32}S/{sup 34}S ratio measurements. For validation of the DIHEN-ICP-IDMS method two certified gas oil reference materials (BCR 107 and BCR 672) were analyzed. For comparison a wet-chemical ICP-IDMS method was applied with microwave-assisted digestion using decomposition of samples in a closed quartz vessel inserted into a normal microwave system. The results from both ICP-IDMS methods agree well with the certified values of the reference materials and also with each other for analyses of other samples. However, the standard deviation of DIHEN-ICP-IDMS was about a factor of two higher (5-6% RSD at concentration levels above 100 {mu}g g{sup -1}) compared with those of wet-chemical ICP-IDMS, mainly due to inhomogeneities of the micro-emulsion, which causes additional plasma instabilities. Detection limits of 4 and 18 {mu}g g{sup -1} were obtained for ICP-IDMS in connection with microwave-assisted digestion and DIHEN-ICP-IDMS, respectively, with a sulfur background of the used Milli-Q water as the main limiting factor for both methods. (orig.)

  20. Prevalence and correlates of bullying victimisation and perpetration in a nationally representative sample of Australian youth.

    Science.gov (United States)

    Thomas, Hannah J; Connor, Jason P; Lawrence, David M; Hafekost, Jennifer M; Zubrick, Stephen R; Scott, James G

    2017-09-01

    Bullying prevalence studies are limited by varied measurement methods and a lack of representative samples. This study estimated the national prevalence of bullying victimisation, perpetration and combined victim-perpetration experiences in a representative population-based sample of Australian youth. The relationships between the three types of bullying involvement with a range of mental health symptoms and diagnoses were also examined. A randomly selected nationally representative sample aged 11-17 years ( N = 2967, M age = 14.6 years; 51.6% male) completed the youth component of the Second Australian Child and Adolescent Survey of Mental Health and Wellbeing (Young Minds Matter). Parents or carers also completed a structured face-to-face interview that asked questions about a single randomly selected child in the household. The youth survey comprised self-reported bullying victimisation and perpetration (Olweus Bully-Victim Questionnaire-adapted), psychological distress (K10), emotional and behavioural problems (Strengths and Difficulties Questionnaire), as well as self-harm, suicide attempts and substance use. Modules from the Diagnostic Interview Schedule for Children Version IV were administered to all youth and parents to assess for mental disorder diagnoses (major depressive disorder, any anxiety disorder and any externalising disorder [attention-deficit hyperactivity disorder, oppositional defiant disorder and conduct disorder]). The 12-month prevalence of bullying victimisation was 13.3%, perpetration 1.6% and victim-perpetration 1.9%. Logistic regression models showed all forms of involvement in bullying were associated with increased risk of psychological distress, emotional and behavioural problems, substance use, self-harm and attempted suicide. Victimisation and victim-perpetration were associated with youth-reported major depressive disorder. There were also significant associations between bullying involvement and parent-reported diagnoses of major

  1. The prevalence of discrimination across racial groups in contemporary America: Results from a nationally representative sample of adults.

    Directory of Open Access Journals (Sweden)

    Brian B Boutwell

    Full Text Available A large body of social science research is devoted to understanding the causes and correlates of discrimination. Comparatively less effort has been aimed at providing a general prevalence estimate of discrimination using a nationally representative sample. The current study is intended to offer such an estimate using a large sample of American respondents (N = 14,793 while also exploring perceptions regarding why respondents felt they were discriminated against. The results provide a broad estimate of self-reported discrimination experiences-an event that was only reported by about one-quarter of all sample members-across racial and ethnic categories.

  2. The prevalence of discrimination across racial groups in contemporary America: Results from a nationally representative sample of adults

    Science.gov (United States)

    Nedelec, Joseph L.; Winegard, Bo; Shackelford, Todd; Beaver, Kevin M.; Vaughn, Michael; Barnes, J. C.; Wright, John P.

    2017-01-01

    A large body of social science research is devoted to understanding the causes and correlates of discrimination. Comparatively less effort has been aimed at providing a general prevalence estimate of discrimination using a nationally representative sample. The current study is intended to offer such an estimate using a large sample of American respondents (N = 14,793) while also exploring perceptions regarding why respondents felt they were discriminated against. The results provide a broad estimate of self-reported discrimination experiences—an event that was only reported by about one-quarter of all sample members—across racial and ethnic categories. PMID:28837680

  3. Sexuality education in a representative sample of Portuguese schools: examining the impact of legislation.

    Science.gov (United States)

    Rocha, Ana Cristina; Duarte, Cidália

    2015-02-01

    To share Portugal's experience with school-based sexuality education, and to describe its implementation at a local level, following an ecological model and using a mixed methodology approach. The study also examines the impact of the latest policies put into effect, identifying potential weaknesses and strengths affecting the effectiveness of sexuality education enforcement. A representative sample of 296 schools in Portugal was analysed. Teachers representing the school completed a questionnaire and were asked to share any kind of official document from their sexuality education project (such as curriculum content). A subsample of these documents was analysed by two coders. Quantitative analysis was carried out using descriptive statistics. The majority of Portuguese schools delivered sexuality education, in line with Portuguese technical guidelines and international recommendations. There were common procedures in planning, implementation and evaluation of sexuality education. Some strengths and weaknesses were identified. Results highlighted the impact of the various systems on the planning, enforcement and evaluation of sexuality education in school. The latest policies introduced valuable changes in school-based sexuality education. A way of assessing effectiveness of sexuality education is still needed.

  4. The prevalence of workaholism: a survey study in a nationally representative sample of Norwegian employees.

    Directory of Open Access Journals (Sweden)

    Cecilie Schou Andreassen

    Full Text Available Workaholism has become an increasingly popular area for empirical study. However, most studies examining the prevalence of workaholism have used non-representative samples and measures with poorly defined cut-off scores. To overcome these methodological limitations, a nationally representative survey among employees in Norway (N = 1,124 was conducted. Questions relating to gender, age, marital status, caretaker responsibility for children, percentage of full-time equivalent, and educational level were asked. Workaholism was assessed by the use of a psychometrically validated instrument (i.e., Bergen Work Addiction Scale. Personality was assessed using the Mini-International Personality Item Pool. Results showed that the prevalence of workaholism was 8.3% (95% CI  = 6.7-9.9%. An adjusted logistic regression analysis showed that workaholism was negatively related to age and positively related to the personality dimensions agreeableness, neuroticism, and intellect/imagination. Implications for these findings are discussed.

  5. Associated factors of obesity in Spanish representative samples.

    Science.gov (United States)

    Ortega Anta, Rosa M; López-Solaber, Ana M; Pérez-Farinós, Napoleón

    2013-09-01

    Given the dramatic increase in the prevalence of obesity and the serious health and economic consequences, the scientific community, health professionals and health agencies are looking for the best strategies to prevent/ fight this trend. In order to plan the most appropriate intervention measures the first step is to identify the associated factors of obesity. This paper presents the results of research conducted/coordinated by our research team and promoted by the Spanish Food Safety Agency (AESAN), in the last five years. These studies were focussed on representative samples of the Spanish population, paying attention to the condition of overweight/obesity and their associated factors. The first study, FANPE ("Fuentes alimentarias de nutrientes de la población española") (2009), was centered in 418 adults (18-60 years) from 15 provinces (30 sampling points). Its aim was to analyze the dietary sources of nutrients, paying particular attention to sodium. This research showed that the risk of overweight/obesity increa ses with age, in people who have follow weight control diets, in ex-smokers, married people and those who slept less than 8.5 hours per day, while the risk is lower in women, people who make sport and those with a University degree. It was also found that overweight people had higher sodium intake and urine excretion. Therefore, and having in mind that 88.2% of the subjects took more than 2 g/day of sodium (the maximum recommended), it is advised to lower the sodium intake not only from the health point of view but also as a probably strategy against obesity. The study ALADINO (Estudio de Alimentación, Actividad física, Desarrollo Infantil y Obesidad--Study of the Diet, Physical Activity, Child Development and Obesity) (2010-2011) was focused on 7659 children (6-9 years) from 19 autonomous communities. We founded a higher percentage of overweight/obesity in boys than in girls, and a significant increase in the figures from the age of 7. Being

  6. Heparin removal by ecteola-cellulose pre-treatment enables the use of plasma samples for accurate measurement of anti-Yellow fever virus neutralizing antibodies.

    Science.gov (United States)

    Campi-Azevedo, Ana Carolina; Peruhype-Magalhães, Vanessa; Coelho-Dos-Reis, Jordana Grazziela; Costa-Pereira, Christiane; Yamamura, Anna Yoshida; Lima, Sheila Maria Barbosa de; Simões, Marisol; Campos, Fernanda Magalhães Freire; de Castro Zacche Tonini, Aline; Lemos, Elenice Moreira; Brum, Ricardo Cristiano; de Noronha, Tatiana Guimarães; Freire, Marcos Silva; Maia, Maria de Lourdes Sousa; Camacho, Luiz Antônio Bastos; Rios, Maria; Chancey, Caren; Romano, Alessandro; Domingues, Carla Magda; Teixeira-Carvalho, Andréa; Martins-Filho, Olindo Assis

    2017-09-01

    Technological innovations in vaccinology have recently contributed to bring about novel insights for the vaccine-induced immune response. While the current protocols that use peripheral blood samples may provide abundant data, a range of distinct components of whole blood samples are required and the different anticoagulant systems employed may impair some properties of the biological sample and interfere with functional assays. Although the interference of heparin in functional assays for viral neutralizing antibodies such as the functional plaque-reduction neutralization test (PRNT), considered the gold-standard method to assess and monitor the protective immunity induced by the Yellow fever virus (YFV) vaccine, has been well characterized, the development of pre-analytical treatments is still required for the establishment of optimized protocols. The present study intended to optimize and evaluate the performance of pre-analytical treatment of heparin-collected blood samples with ecteola-cellulose (ECT) to provide accurate measurement of anti-YFV neutralizing antibodies, by PRNT. The study was designed in three steps, including: I. Problem statement; II. Pre-analytical steps; III. Analytical steps. Data confirmed the interference of heparin on PRNT reactivity in a dose-responsive fashion. Distinct sets of conditions for ECT pre-treatment were tested to optimize the heparin removal. The optimized protocol was pre-validated to determine the effectiveness of heparin plasma:ECT treatment to restore the PRNT titers as compared to serum samples. The validation and comparative performance was carried out by using a large range of serum vs heparin plasma:ECT 1:2 paired samples obtained from unvaccinated and 17DD-YFV primary vaccinated subjects. Altogether, the findings support the use of heparin plasma:ECT samples for accurate measurement of anti-YFV neutralizing antibodies. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Stochastic sampling of the RNA structural alignment space.

    Science.gov (United States)

    Harmanci, Arif Ozgun; Sharma, Gaurav; Mathews, David H

    2009-07-01

    A novel method is presented for predicting the common secondary structures and alignment of two homologous RNA sequences by sampling the 'structural alignment' space, i.e. the joint space of their alignments and common secondary structures. The structural alignment space is sampled according to a pseudo-Boltzmann distribution based on a pseudo-free energy change that combines base pairing probabilities from a thermodynamic model and alignment probabilities from a hidden Markov model. By virtue of the implicit comparative analysis between the two sequences, the method offers an improvement over single sequence sampling of the Boltzmann ensemble. A cluster analysis shows that the samples obtained from joint sampling of the structural alignment space cluster more closely than samples generated by the single sequence method. On average, the representative (centroid) structure and alignment of the most populated cluster in the sample of structures and alignments generated by joint sampling are more accurate than single sequence sampling and alignment based on sequence alone, respectively. The 'best' centroid structure that is closest to the known structure among all the centroids is, on average, more accurate than structure predictions of other methods. Additionally, cluster analysis identifies, on average, a few clusters, whose centroids can be presented as alternative candidates. The source code for the proposed method can be downloaded at http://rna.urmc.rochester.edu.

  8. High-throughput automated microfluidic sample preparation for accurate microbial genomics.

    Science.gov (United States)

    Kim, Soohong; De Jonghe, Joachim; Kulesa, Anthony B; Feldman, David; Vatanen, Tommi; Bhattacharyya, Roby P; Berdy, Brittany; Gomez, James; Nolan, Jill; Epstein, Slava; Blainey, Paul C

    2017-01-27

    Low-cost shotgun DNA sequencing is transforming the microbial sciences. Sequencing instruments are so effective that sample preparation is now the key limiting factor. Here, we introduce a microfluidic sample preparation platform that integrates the key steps in cells to sequence library sample preparation for up to 96 samples and reduces DNA input requirements 100-fold while maintaining or improving data quality. The general-purpose microarchitecture we demonstrate supports workflows with arbitrary numbers of reaction and clean-up or capture steps. By reducing the sample quantity requirements, we enabled low-input (∼10,000 cells) whole-genome shotgun (WGS) sequencing of Mycobacterium tuberculosis and soil micro-colonies with superior results. We also leveraged the enhanced throughput to sequence ∼400 clinical Pseudomonas aeruginosa libraries and demonstrate excellent single-nucleotide polymorphism detection performance that explained phenotypically observed antibiotic resistance. Fully-integrated lab-on-chip sample preparation overcomes technical barriers to enable broader deployment of genomics across many basic research and translational applications.

  9. A comprehensive literature review reflecting fifteen years of debate regarding the representativity of reverse circulation vs blast hole drill sampling

    DEFF Research Database (Denmark)

    Engström, Karin

    2017-01-01

    Blast hole sampling is widely used for grade control by the mining industry all over the world, both in precious and base metal open pit mining. Blast hole (BH) samples are often regarded as inferior in comparison to “proper drill sampling” like reverse circulation (RC) and diamond (core) drilling...... (DD), and are accused of lacking representativity by the sampling community. The present paper aims at collecting all peer reviewed publications from 2000 onwards that concern open pit mine sampling performance of BH, RC and/or DD drill sampling. This will form a comprehensive literature review...

  10. Sample Preparation for Electron Probe Microanalysis-Pushing the Limits.

    Science.gov (United States)

    Geller, Joseph D; Engle, Paul D

    2002-01-01

    There are two fundamental considerations in preparing samples for electron probe microanalysis (EPMA). The first one may seem obvious, but we often find it is overlooked. That is, the sample analyzed should be representative of the population from which it comes. The second is a direct result of the assumptions in the calculations used to convert x-ray intensity ratios, between the sample and standard, to concentrations. Samples originate from a wide range of sources. During their journey to being excited under the electron beam for the production of x rays there are many possibilities for sample alteration. Handling can contaminate samples by adding extraneous matter. In preparation, the various abrasives used in sizing the sample by sawing, grinding and polishing can embed themselves. The most accurate composition of a contaminated sample is, at best, not representative of the original sample; it is misleading. Our laboratory performs EPMA analysis on customer submitted samples and prepares over 250 different calibration standards including pure elements, compounds, alloys, glasses and minerals. This large variety of samples does not lend itself to mass production techniques, including automatic polishing. Our manual preparation techniques are designed individually for each sample. The use of automated preparation equipment does not lend itself to this environment, and is not included in this manuscript. The final step in quantitative electron probe microanalysis is the conversion of x-ray intensities ratios, known as the "k-ratios," to composition (in mass fraction or atomic percent) and/or film thickness. Of the many assumptions made in the ZAF (where these letters stand for atomic number, absorption and fluorescence) corrections the localized geometry between the sample and electron beam, or takeoff angle, must be accurately known. Small angular errors can lead to significant errors in the final results. The sample preparation technique then becomes very

  11. Results from tests of TFL Hydragard sampling loop

    International Nuclear Information System (INIS)

    Steimke, J.L.

    1995-03-01

    When the Defense Waste Processing Facility (DWPF) is operational, processed radioactive sludge will be transferred in batches to the Slurry Mix Evaporator (SME), where glass frit will be added and the contents concentrated by boiling. Batches of the slurry mixture are transferred from the SME to the Melter Feed Tank (MFT). Hydragard reg-sign sampling systems are used on the SME and the MFT for collecting slurry samples in vials for chemical analysis. An accurate replica of the Hydragard sampling system was built and tested in the thermal Fluids Laboratory (TFL) to determine the hydragard accuracy. It was determined that the original Hydragard valve frequently drew a non-representative sample stream through the sample vial that ranged from frit enriched to frit depleted. The Hydragard valve was modified by moving the plunger and its seat backwards so that the outer surface of the plunger was flush with the inside diameter of the transfer line when the valve was open. The slurry flowing through the vial accurately represented the composition of the slurry in the reservoir for two types of slurries, different dilution factors, a range of transfer flows and a range of vial flows. It was then found that the 15 ml of slurry left in the vial when the Hydragard valve was closed, which is what will be analyzed at DWPF, had a lower ratio of frit to sludge as characterized by the lithium to iron ratio than the slurry flowing through it. The reason for these differences is not understood at this time but it is recommended that additional experimentation be performed with the TFL Hydragard loop to determine the cause

  12. The challenge of accurately documenting bee species richness in agroecosystems: bee diversity in eastern apple orchards

    Science.gov (United States)

    Russo, Laura; Park, Mia; Gibbs, Jason; Danforth, Bryan

    2015-01-01

    Bees are important pollinators of agricultural crops, and bee diversity has been shown to be closely associated with pollination, a valuable ecosystem service. Higher functional diversity and species richness of bees have been shown to lead to higher crop yield. Bees simultaneously represent a mega-diverse taxon that is extremely challenging to sample thoroughly and an important group to understand because of pollination services. We sampled bees visiting apple blossoms in 28 orchards over 6 years. We used species rarefaction analyses to test for the completeness of sampling and the relationship between species richness and sampling effort, orchard size, and percent agriculture in the surrounding landscape. We performed more than 190 h of sampling, collecting 11,219 specimens representing 104 species. Despite the sampling intensity, we captured wild bees did not appear to be a factor, as we found no correlation between honeybee and wild bee abundance. Our study shows that the pollinator fauna of agroecosystems can be diverse and challenging to thoroughly sample. We demonstrate that there is high temporal variation in community composition and that sites vary widely in the sampling effort required to fully describe their diversity. In order to maximize pollination services provided by wild bee species, we must first accurately estimate species richness. For researchers interested in providing this estimate, we recommend multiyear studies and rarefaction analyses to quantify the gap between observed and expected species richness. PMID:26380684

  13. Are extracted materials truly representative of original samples? Impact of C18 extraction on CDOM optical and chemical properties

    Directory of Open Access Journals (Sweden)

    Andrea A Andrew

    2016-02-01

    Full Text Available Some properties of dissolved organic matter (DOM and chromophoric dissolved organic matter (CDOM can be easily measured directly on whole waters, while others require sample concentration and removal of natural salts. To increase CDOM content and eliminate salts, solid phase extraction is often employed. Biases following extraction and elution are inevitable, thus raising the question of how truly representative the extracted material is of the original. In this context, we investigated the wavelength dependence of extraction efficiency for C18 cartridges with respect to CDOM optical properties using samples obtained from the Middle Atlantic Bight (MAB and the Equatorial Atlantic Ocean (EAO. Further, we compared the optical changes of C18 extracts and the corresponding whole water following chemical reduction with sodium borohydride (NaBH4.C18 cartridges preferentially extracted long-wavelength absorbing/emitting material for samples impacted by riverine input. Extraction efficiency overall decreased with offshore distance away from riverine input. Spectral slopes of C18-OM samples were also almost always lower than those of their corresponding CDOM samples supporting the preferential extraction of higher molecular weight absorbing material. The wavelength dependence of the optical properties (absorption, fluorescence emission and quantum yield of the original water samples and their corresponding extracted material were very similar. C18 extracts and corresponding water samples further exhibited comparable optical changes following NaBH4 reduction, thus suggesting a similarity in nature (structure of the optically active extracted material, independent of geographical locale. Altogether, these data suggested a strong similarity between C18 extracts and corresponding whole waters, thus indicating that extracts are representative of the CDOM content of original waters.

  14. Are Extracted Materials Truly Representative of Original Samples? Impact of C18 Extraction on CDOM Optical and Chemical Properties.

    Science.gov (United States)

    Andrew, Andrea A; Del Vecchio, Rossana; Zhang, Yi; Subramaniam, Ajit; Blough, Neil V

    2016-01-01

    Some properties of dissolved organic matter (DOM) and chromophoric dissolved organic matter (CDOM) can be easily measured directly on whole waters, while others require sample concentration and removal of natural salts. To increase CDOM content and eliminate salts, solid phase extraction (SPE) is often employed. Biases following extraction and elution are inevitable, thus raising the question of how truly representative the extracted material is of the original. In this context, we investigated the wavelength dependence of extraction efficiency for C18 cartridges with respect to CDOM optical properties using samples obtained from the Middle Atlantic Bight (MAB) and the Equatorial Atlantic Ocean (EAO). Further, we compared the optical changes of C18 extracts and the corresponding whole water following chemical reduction with sodium borohydride (NaBH4). C18 cartridges preferentially extracted long-wavelength absorbing/emitting material for samples impacted by riverine input. Extraction efficiency overall decreased with offshore distance away from riverine input. Spectral slopes of C18-OM samples were also almost always lower than those of their corresponding CDOM samples supporting the preferential extraction of higher molecular weight absorbing material. The wavelength dependence of the optical properties (absorption, fluorescence emission, and quantum yield) of the original water samples and their corresponding extracted material were very similar. C18 extracts and corresponding water samples further exhibited comparable optical changes following NaBH4 reduction, thus suggesting a similarity in nature (structure) of the optically active extracted material, independent of geographical locale. Altogether, these data suggested a strong similarity between C18 extracts and corresponding whole waters, thus indicating that extracts are representative of the CDOM content of original waters.

  15. Are extracted materials truly representative of original samples? Impact of C18 extraction on CDOM optical and chemical properties

    Science.gov (United States)

    Andrew, Andrea; Del Vecchio, Rossana; Zhang, Yi; Subramaniam, Ajit; Blough, Neil

    2016-02-01

    Some properties of dissolved organic matter (DOM) and chromophoric dissolved organic matter (CDOM) can be easily measured directly on whole waters, while others require sample concentration and removal of natural salts. To increase CDOM content and eliminate salts, solid phase extraction is often employed. Biases following extraction and elution are inevitable, thus raising the question of how truly representative the extracted material is of the original. In this context, we investigated the wavelength dependence of extraction efficiency for C18 cartridges with respect to CDOM optical properties using samples obtained from the Middle Atlantic Bight (MAB) and the Equatorial Atlantic Ocean (EAO). Further, we compared the optical changes of C18 extracts and the corresponding whole water following chemical reduction with sodium borohydride (NaBH4). C18 cartridges preferentially extracted long-wavelength absorbing/emitting material for samples impacted by riverine input. Extraction efficiency overall decreased with offshore distance away from riverine input. Spectral slopes of C18-OM samples were also almost always lower than those of their corresponding CDOM samples supporting the preferential extraction of higher molecular weight absorbing material. The wavelength dependence of the optical properties (absorption, fluorescence emission and quantum yield) of the original water samples and their corresponding extracted material were very similar. C18 extracts and corresponding water samples further exhibited comparable optical changes following NaBH4 reduction, thus suggesting a similarity in nature (structure) of the optically active extracted material, independent of geographical locale. Altogether, these data suggested a strong similarity between C18 extracts and corresponding whole waters, thus indicating that extracts are representative of the CDOM content of original waters.

  16. Optimism is universal: exploring the presence and benefits of optimism in a representative sample of the world.

    Science.gov (United States)

    Gallagher, Matthew W; Lopez, Shane J; Pressman, Sarah D

    2013-10-01

    Current theories of optimism suggest that the tendency to maintain positive expectations for the future is an adaptive psychological resource associated with improved well-being and physical health, but the majority of previous optimism research has been conducted in industrialized nations. The present study examined (a) whether optimism is universal, (b) what demographic factors predict optimism, and (c) whether optimism is consistently associated with improved subjective well-being and perceived health worldwide. The present study used representative samples of 142 countries that together represent 95% of the world's population. The total sample of 150,048 individuals had a mean age of 38.28 (SD = 16.85) and approximately equal sex distribution (51.2% female). The relationships between optimism, subjective well-being, and perceived health were examined using hierarchical linear modeling. Results indicated that most individuals and most countries worldwide are optimistic and that higher levels of optimism are associated with improved subjective well-being and perceived health worldwide. The present study provides compelling evidence that optimism is a universal phenomenon and that the associations between optimism and improved psychological functioning are not limited to industrialized nations. © 2012 Wiley Periodicals, Inc.

  17. Determination of a representative volume element based on the variability of mechanical properties with sample size in bread.

    Science.gov (United States)

    Ramírez, Cristian; Young, Ashley; James, Bryony; Aguilera, José M

    2010-10-01

    Quantitative analysis of food structure is commonly obtained by image analysis of a small portion of the material that may not be the representative of the whole sample. In order to quantify structural parameters (air cells) of 2 types of bread (bread and bagel) the concept of representative volume element (RVE) was employed. The RVE for bread, bagel, and gelatin-gel (used as control) was obtained from the relationship between sample size and the coefficient of variation, calculated from the apparent Young's modulus measured on 25 replicates. The RVE was obtained when the coefficient of variation for different sample sizes converged to a constant value. In the 2 types of bread tested, the tendency of the coefficient of variation was to decrease as the sample size increased, while in the homogeneous gelatin-gel, it remained always constant around 2.3% to 2.4%. The RVE resulted to be cubes with sides of 45 mm for bread, 20 mm for bagels, and 10 mm for gelatin-gel (smallest sample tested). The quantitative image analysis as well as visual observation demonstrated that bread presented the largest dispersion of air-cell sizes. Moreover, both the ratio of maximum air-cell area/image area and maximum air-cell height/image height were greater for bread (values of 0.05 and 0.30, respectively) than for bagels (0.03 and 0.20, respectively). Therefore, the size and the size variation of air cells present in the structure determined the size of the RVE. It was concluded that RVE is highly dependent on the heterogeneity of the structure of the types of baked products.

  18. Reproducibility of preclinical animal research improves with heterogeneity of study samples

    Science.gov (United States)

    Vogt, Lucile; Sena, Emily S.; Würbel, Hanno

    2018-01-01

    Single-laboratory studies conducted under highly standardized conditions are the gold standard in preclinical animal research. Using simulations based on 440 preclinical studies across 13 different interventions in animal models of stroke, myocardial infarction, and breast cancer, we compared the accuracy of effect size estimates between single-laboratory and multi-laboratory study designs. Single-laboratory studies generally failed to predict effect size accurately, and larger sample sizes rendered effect size estimates even less accurate. By contrast, multi-laboratory designs including as few as 2 to 4 laboratories increased coverage probability by up to 42 percentage points without a need for larger sample sizes. These findings demonstrate that within-study standardization is a major cause of poor reproducibility. More representative study samples are required to improve the external validity and reproducibility of preclinical animal research and to prevent wasting animals and resources for inconclusive research. PMID:29470495

  19. Method for more accurate transmittance measurements of low-angle scattering samples using an integrating sphere with an entry port beam diffuser

    International Nuclear Information System (INIS)

    Nilsson, Annica M.; Jonsson, Andreas; Jonsson, Jacob C.; Roos, Arne

    2011-01-01

    For most integrating sphere measurements, the difference in light distribution between a specular reference beam and a diffused sample beam can result in significant errors. The problem becomes especially pronounced in integrating spheres that include a port for reflectance or diffuse transmittance measurements. The port is included in many standard spectrophotometers to facilitate a multipurpose instrument, however, absorption around the port edge can result in a detected signal that is too low. The absorption effect is especially apparent for low-angle scattering samples, because a significant portion of the light is scattered directly onto that edge. In this paper, a method for more accurate transmittance measurements of low-angle light-scattering samples is presented. The method uses a standard integrating sphere spectrophotometer, and the problem with increased absorption around the port edge is addressed by introducing a diffuser between the sample and the integrating sphere during both reference and sample scan. This reduces the discrepancy between the two scans and spreads the scattered light over a greater portion of the sphere wall. The problem with multiple reflections between the sample and diffuser is successfully addressed using a correction factor. The method is tested for two patterned glass samples with low-angle scattering and in both cases the transmittance accuracy is significantly improved.

  20. Foresight begins with FMEA. Delivering accurate risk assessments.

    Science.gov (United States)

    Passey, R D

    1999-03-01

    If sufficient factors are taken into account and two- or three-stage analysis is employed, failure mode and effect analysis represents an excellent technique for delivering accurate risk assessments for products and processes, and for relating them to legal liability. This article describes a format that facilitates easy interpretation.

  1. Studying the sampling representativeness in the NPP ventilation ducts

    International Nuclear Information System (INIS)

    Sosnovskij, R.I.; Fedchenko, T.K.; Minin, S.A.

    2000-01-01

    Measurements of the gas and aerosol voluminous activity in the NPP ventilation ducts are an important source of information on the radiation contaminants ingress into the environmental medium. These measurements include sampling, samples transport and proper measurements. The work is devoted to calculation of metrological characteristics of the sampling systems for the NPP gas-aerosol releases by different parameters of these systems and ventilation ducts. The results obtained are intended for application by designing such systems and their metrological certification [ru

  2. The Cycle of Violence: Examining Attitudes Toward and Experiences of Corporal Punishment in a Representative German Sample.

    Science.gov (United States)

    Witt, Andreas; Fegert, Jörg M; Rodens, Klaus P; Brähler, Elmar; Lührs Da Silva, Claudia; Plener, Paul L

    2017-09-01

    The use of corporal punishment (CP) is controversial despite the negative consequences of its use that have been documented. Consequences include the use of CP by those who experienced CP themselves, described in the theory of the cycle of violence. There are little data on the cycle of violence, especially on those who break it and in representative samples. This study examines the cycle of violence in a representative sample by analyzing experiences of and attitudes toward CP. Attitudes toward, and own experiences of, CP by their parents were assessed in a sample of 2,519 individuals (female 54.6%, age range = 14-99 years, M = 48.9 years). Latent class analysis (LCA) was used to identify subgroups of participants who support and oppose CP. Breaking the cycle, defined as having experienced CP and opposing CP, was examined. Factors associated with positive and negative attitudes toward CP were identified using group comparisons and binary logistic regression. The majority of the sample opposed CP (56%), whereas one third supported less severe forms of CP and 8.2% also supported severe CP. Those supporting CP reported having experienced CP by their parents more often. Of those who had experienced CP, 47% were identified as breaking the cycle. Female gender, younger age, not being divorced, and being married and living together, as well as a higher level of education were associated with breaking the cycle. Even though CP was legally banned in Germany, a relatively high proportion still reports positive attitudes toward and experiences of CP. The ban of CP by the federal government seems to be an effective measure to change attitudes on a societal level as rates were lower in comparison with earlier studies. Future studies should examine interactions between different types of CP, attitudes toward its use, and additional mediating factors.

  3. Radial line-scans as representative sampling strategy in dried-droplet laser ablation of liquid samples deposited on pre-cut filter paper disks.

    Science.gov (United States)

    Nischkauer, Winfried; Vanhaecke, Frank; Bernacchi, Sébastien; Herwig, Christoph; Limbeck, Andreas

    2014-11-01

    Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL - 1 with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with

  4. Radial line-scans as representative sampling strategy in dried-droplet laser ablation of liquid samples deposited on pre-cut filter paper disks

    Science.gov (United States)

    Nischkauer, Winfried; Vanhaecke, Frank; Bernacchi, Sébastien; Herwig, Christoph; Limbeck, Andreas

    2014-11-01

    Nebulising liquid samples and using the aerosol thus obtained for further analysis is the standard method in many current analytical techniques, also with inductively coupled plasma (ICP)-based devices. With such a set-up, quantification via external calibration is usually straightforward for samples with aqueous or close-to-aqueous matrix composition. However, there is a variety of more complex samples. Such samples can be found in medical, biological, technological and industrial contexts and can range from body fluids, like blood or urine, to fuel additives or fermentation broths. Specialized nebulizer systems or careful digestion and dilution are required to tackle such demanding sample matrices. One alternative approach is to convert the liquid into a dried solid and to use laser ablation for sample introduction. Up to now, this approach required the application of internal standards or matrix-adjusted calibration due to matrix effects. In this contribution, we show a way to circumvent these matrix effects while using simple external calibration for quantification. The principle of representative sampling that we propose uses radial line-scans across the dried residue. This compensates for centro-symmetric inhomogeneities typically observed in dried spots. The effectiveness of the proposed sampling strategy is exemplified via the determination of phosphorus in biochemical fermentation media. However, the universal viability of the presented measurement protocol is postulated. Detection limits using laser ablation-ICP-optical emission spectrometry were in the order of 40 μg mL- 1 with a reproducibility of 10 % relative standard deviation (n = 4, concentration = 10 times the quantification limit). The reported sensitivity is fit-for-purpose in the biochemical context described here, but could be improved using ICP-mass spectrometry, if future analytical tasks would require it. Trueness of the proposed method was investigated by cross-validation with

  5. Validation of the Narcissistic Admiration and Rivalry Questionnaire Short Scale (NARQ-S) in convenience and representative samples.

    Science.gov (United States)

    Leckelt, Marius; Wetzel, Eunike; Gerlach, Tanja M; Ackerman, Robert A; Miller, Joshua D; Chopik, William J; Penke, Lars; Geukes, Katharina; Küfner, Albrecht C P; Hutteman, Roos; Richter, David; Renner, Karl-Heinz; Allroggen, Marc; Brecheen, Courtney; Campbell, W Keith; Grossmann, Igor; Back, Mitja D

    2018-01-01

    Due to increased empirical interest in narcissism across the social sciences, there is a need for inventories that can be administered quickly while also reliably measuring both the agentic and antagonistic aspects of grandiose narcissism. In this study, we sought to validate the factor structure, provide representative descriptive data and reliability estimates, assess the reliability across the trait spectrum, and examine the nomological network of the short version of the Narcissistic Admiration and Rivalry Questionnaire (NARQ-S; Back et al., 2013). We used data from a large convenience sample (total N = 11,937) as well as data from a large representative sample (total N = 4,433) that included responses to other narcissism measures as well as related constructs, including the other Dark Triad traits, Big Five personality traits, and self-esteem. Confirmatory factor analysis and item response theory were used to validate the factor structure and estimate the reliability across the latent trait spectrum, respectively. Results suggest that the NARQ-S shows a robust factor structure and is a reliable and valid short measure of the agentic and antagonistic aspects of grandiose narcissism. We also discuss future directions and applications of the NARQ-S as a short and comprehensive measure of grandiose narcissism. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  6. Design, analysis, and interpretation of field quality-control data for water-sampling projects

    Science.gov (United States)

    Mueller, David K.; Schertz, Terry L.; Martin, Jeffrey D.; Sandstrom, Mark W.

    2015-01-01

    The process of obtaining and analyzing water samples from the environment includes a number of steps that can affect the reported result. The equipment used to collect and filter samples, the bottles used for specific subsamples, any added preservatives, sample storage in the field, and shipment to the laboratory have the potential to affect how accurately samples represent the environment from which they were collected. During the early 1990s, the U.S. Geological Survey implemented policies to include the routine collection of quality-control samples in order to evaluate these effects and to ensure that water-quality data were adequately representing environmental conditions. Since that time, the U.S. Geological Survey Office of Water Quality has provided training in how to design effective field quality-control sampling programs and how to evaluate the resultant quality-control data. This report documents that training material and provides a reference for methods used to analyze quality-control data.

  7. Sample Preparation for Electron Probe Microanalysis—Pushing the Limits

    Science.gov (United States)

    Geller, Joseph D.; Engle, Paul D.

    2002-01-01

    There are two fundamental considerations in preparing samples for electron probe microanalysis (EPMA). The first one may seem obvious, but we often find it is overlooked. That is, the sample analyzed should be representative of the population from which it comes. The second is a direct result of the assumptions in the calculations used to convert x-ray intensity ratios, between the sample and standard, to concentrations. Samples originate from a wide range of sources. During their journey to being excited under the electron beam for the production of x rays there are many possibilities for sample alteration. Handling can contaminate samples by adding extraneous matter. In preparation, the various abrasives used in sizing the sample by sawing, grinding and polishing can embed themselves. The most accurate composition of a contaminated sample is, at best, not representative of the original sample; it is misleading. Our laboratory performs EPMA analysis on customer submitted samples and prepares over 250 different calibration standards including pure elements, compounds, alloys, glasses and minerals. This large variety of samples does not lend itself to mass production techniques, including automatic polishing. Our manual preparation techniques are designed individually for each sample. The use of automated preparation equipment does not lend itself to this environment, and is not included in this manuscript. The final step in quantitative electron probe microanalysis is the conversion of x-ray intensities ratios, known as the “k-ratios,” to composition (in mass fraction or atomic percent) and/or film thickness. Of the many assumptions made in the ZAF (where these letters stand for atomic number, absorption and fluorescence) corrections the localized geometry between the sample and electron beam, or takeoff angle, must be accurately known. Small angular errors can lead to significant errors in the final results. The sample preparation technique then becomes very

  8. Accurate and reproducible measurements of RhoA activation in small samples of primary cells.

    Science.gov (United States)

    Nini, Lylia; Dagnino, Lina

    2010-03-01

    Rho GTPase activation is essential in a wide variety of cellular processes. Measurement of Rho GTPase activation is difficult with limited material, such as tissues or primary cells that exhibit stringent culture requirements for growth and survival. We defined parameters to accurately and reproducibly measure RhoA activation (i.e., RhoA-GTP) in cultured primary keratinocytes in response to serum and growth factor stimulation using enzyme-linked immunosorbent assay (ELISA)-based G-LISA assays. We also established conditions that minimize RhoA-GTP in unstimulated cells without affecting viability, allowing accurate measurements of RhoA activation on stimulation or induction of exogenous GTPase expression. Copyright 2009 Elsevier Inc. All rights reserved.

  9. The Relationship between Child Abuse, Parental Divorce, and Lifetime Mental Disorders and Suicidality in a Nationally Representative Adult Sample

    Science.gov (United States)

    Afifi, Tracie O.; Boman, Jonathan; Fleisher, William; Sareen, Jitender

    2009-01-01

    Objectives: To determine how the experiences of child abuse and parental divorce are related to long-term mental health outcomes using a nationally representative adult sample after adjusting for sociodemographic variables and parental psychopathology. Methods: Data were drawn from the National Comorbidity Survey (NCS, n=5,877; age 15-54 years;…

  10. Sexual orientation and future parenthood in a 2011-2013 nationally representative United States sample.

    Science.gov (United States)

    Riskind, Rachel G; Tornello, Samantha L

    2017-09-01

    Previous researchers have found evidence for differences in parenting goals between lesbian and gay people and their heterosexual peers. However, no previous research has quantified the parenting goals of bisexual people or evaluated parenting goals as a function of sexual partner gender. In addition, political and social climates for sexual minority people had improved rapidly since the last representative data on lesbian and gay peoples' plans for parenthood were collected. We analyzed data from 3,941 childless lesbian, gay, bisexual, and heterosexual participants from the 2011-2013 National Survey of Family Growth (NSFG; United States Department of Health and Human Services, Centers for Disease Control and Prevention, National Center for Health Statistics, 2014), a nationally representative sample of United States residents aged 15 to 44 years. We found that statistically significant, within-gender sexual orientation differences in parenting plans persist, despite social and legal changes. Consistent with hypotheses, bisexual men's parenting desires and intentions were similar to those of their heterosexual male peers and different from those of their gay male peers, while bisexual women's reports were more mixed. Also consistent with hypotheses, the gender of the most recent sexual partner was a strong predictor of parenting goals. We discuss implications for mental and reproductive health-care providers, attorneys, social workers, and others who interact with sexual minority adults. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  11. Walking, body mass index, and self-rated health in a representative sample of Spanish adults

    Directory of Open Access Journals (Sweden)

    Vicente Romo-Perez

    2016-01-01

    Full Text Available Abstract Obesity and physical inactivity (PI are risk factors for chronic diseases and are associated with lifestyle and environmental factors. The study tested the association between PI, body mass index (BMI, and self-rated health in a representative sample of the Spanish adult population (N = 21,486. The sample included 41.5% men, with mean age 52.3 years (± 18.03, and age range 20-82 years. Prevalence of overweight/obesity was 34.2%/12.7% in women and 52.1%/12.7% in men (p < 0.001 for obesity in both sexes. 53% of women and 57.5% of men met recommended levels of physical activity by walking (≥ 150 minutes/week. According to logistic regression analysis, individuals that walked less had higher risk of overweight or obesity. Data from the population-based surveillance study support suggestions that regular walking by adults is associated with positive self-rated health and better BMI profile. Obesity and low/very low self-rated health have low prevalence rates to meet the recommendations.

  12. Concurrent and simultaneous polydrug use: latent class analysis of an Australian nationally representative sample of young adults.

    Directory of Open Access Journals (Sweden)

    Lake-Hui eQuek

    2013-11-01

    Full Text Available Background: Alcohol use and illicit drug use peak during young adulthood (around 18-29 years of age, but comparatively little is known about polydrug use in nationally representative samples of young adults. Drawing on a nationally representative cross-sectional survey (Australian National Drug Strategy Household Survey, this study examines polydrug use patterns and associated psychosocial risk factors among young adults (n = 3,333; age 19-29. Method: The use of a broad range of licit and illicit drugs were examined, including alcohol, tobacco, cannabis, cocaine, hallucinogens, ecstasy, ketamine, GHB, inhalants, steroids, barbiturates, meth/amphetamines, heroin, methadone/buprenorphine, other opiates, painkillers and tranquillizers/sleeping pills. Latent class analysis was employed to identify patterns of polydrug use. Results: Polydrug use in this sample was best described using a 5-class solution. The majority of young adults predominantly used alcohol only (52.3%, alcohol and tobacco (34.18%. The other classes were cannabis, ecstasy, and licit drug use (9.4%, cannabis, amphetamine derivative, and licit drug use (2.8%, and sedative and alcohol use (1.3%. Young adult males with low education and/or high income were most at risk of polydrug use. Conclusion: Almost half of young adults reported polydrug use, highlighting the importance of post-high school screening for key risk factors and polydrug use profiles, and the delivery of early intervention strategies targeting illicit drugs.

  13. Illicit drug use among rave attendees in a nationally representative sample of US high school seniors.

    Science.gov (United States)

    Palamar, Joseph J; Griffin-Tomas, Marybec; Ompad, Danielle C

    2015-07-01

    The popularity of electronic dance music and rave parties such as dance festivals has increased in recent years. Targeted samples of party-goers suggest high rates of drug use among attendees, but few nationally representative studies have examined these associations. We examined sociodemographic correlates of rave attendance and relationships between rave attendance and recent (12-month) use of various drugs in a representative sample of US high school seniors (modal age: 18) from the Monitoring the Future study (2011-2013; Weighted N=7373). One out of five students (19.8%) reported ever attending a rave, and 7.7% reported attending at least monthly. Females and highly religious students were less likely to attend raves, and Hispanics, students residing in cities, students with higher income and those who go out for fun multiple times per week were more likely to attend. Rave attendees were more likely than non-attendees to report use of an illicit drug other than marijuana (35.5% vs. 15.6%, p<0.0001). Attendees were more likely to report use of each of the 18 drugs assessed, and attendees were more likely to report more frequent use (≥6 times) of each drug (ps<0.0001). Controlling for sociodemographic covariates, frequent attendance (monthly or more often) was associated with higher odds of use of each drug (ps<0.0001). Frequent attendees were at highest risk for use of "club drugs." Findings from this study can help inform prevention and harm reduction among rave attendees at greatest risk for drug use. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  14. Attention-Deficit/Hyperactivity Disorder Symptoms and Life Satisfaction in a Representative Adolescent and Adult Sample.

    Science.gov (United States)

    Hennig, Timo; Koglin, Ute; Schmidt, Sören; Petermann, Franz; Brähler, Elmar

    2017-09-01

    Although it is well documented that attention-deficit/hyperactivity disorder (ADHD) is associated with reduced life satisfaction, the mechanisms that might explain this co-occurrence are unclear. We examined the correlation of ADHD symptoms with life satisfaction and whether this association is mediated by (lacking) social support and depressive symptoms. Self-reported ADHD symptoms, life satisfaction, social support, and depressive symptoms were assessed in a representative, predominantly adult sample from the general population (14-91 years, N = 2517). Attention-deficit/hyperactivity disorder symptoms correlated negatively with life satisfaction (r = -0.41, p life satisfaction. Counteracting problems with social relationships and treating depressive symptoms may help to increase life satisfaction in adults with ADHD symptoms.

  15. Accurate signal reconstruction for higher order Lagrangian–Eulerian back-coupling in multiphase turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Zwick, D; Balachandar, S [Department of Mechanical and Aerospace Engineering, University of Florida, FL, United States of America (United States); Sakhaee, E; Entezari, A, E-mail: dpzwick@ufl.edu [Department of Computer and Information Science and Engineering, University of Florida, FL, United States of America (United States)

    2017-10-15

    Multiphase flow simulation serves a vital purpose in applications as diverse as engineering design, natural disaster prediction, and even study of astrophysical phenomena. In these scenarios, it can be very difficult, expensive, or even impossible to fully represent the physical system under consideration. Even still, many such real-world applications can be modeled as a two-phase flow containing both continuous and dispersed phases. Consequentially, the continuous phase is thought of as a fluid and the dispersed phase as particles. The continuous phase is typically treated in the Eulerian frame of reference and represented on a fixed grid, while the dispersed phase is treated in the Lagrangian frame and represented by a sample distribution of Lagrangian particles that approximate a cloud. Coupling between the phases requires interpolation of the continuous phase properties at the locations of the Lagrangian particles. This interpolation step is straightforward and can be performed at higher order accuracy. The reverse process of projecting the Lagrangian particle properties from the sample points to the Eulerian grid is complicated by the time-dependent non-uniform distribution of the Lagrangian particles. In this paper we numerically examine three reconstruction, or projection, methods: (i) direct summation (DS), (ii) least-squares, and (iii) sparse approximation. We choose a continuous representation of the dispersed phase property that is systematically varied from a simple single mode periodic signal to a more complex artificially constructed turbulent signal to see how each method performs in reconstruction. In these experiments, we show that there is a link between the number of dispersed Lagrangian sample points and the number of structured grid points to accurately represent the underlying functional representation to machine accuracy. The least-squares method outperforms the other methods in most cases, while the sparse approximation method is able to

  16. Fostering accurate HIV/AIDS knowledge among unmarried youths in Cameroon: do family environment and peers matter?

    Science.gov (United States)

    Tsala Dimbuene, Zacharie; Kuate Defo, Barthelemy

    2011-05-19

    The last three decades have seen a series of HIV interventions in sub-Saharan Africa. However, youths still have a mixture of correct and incorrect HIV/AIDS knowledge of transmission routes and prevention strategies. Previous studies have identified parents and peers as the most important socializing agents for youths. This paper assesses the relationships between family structure, family/peer communication about sexuality and accurate knowledge of transmission routes and prevention strategies. Data were drawn from the Cameroon Family Life and Health Survey (CFHS) conducted in 2002. The CFHS collected information on a representative sample of 4950 people aged 10 years and over nested within 1765 selected households from the 75 localities forming the administrative prefecture of Bandjoun, using detailed questionnaires about family, HIV/AIDS/STDs knowledge, sexual behaviors, contraception, health, media exposure, household assets and neighborhood characteristics. The survey cooperation rates were high (97%). For the purpose of this study, a sub-sample of 2028 unmarried youths aged 12-29 years was utilized. Overall, 42% of respondents reported accurate knowledge of documented HIV transmission routes whereas 21% of them had inaccurate knowledge such as AIDS can be transmitted through mosquito bites or casual contact with an infected person. Only 9% of respondents were knowledgeable about all HIV prevention strategies. Multivariate analyses showed that family structure, communication with parents/guardians and peers about sexual topics were significantly associated with accurate HIV knowledge. Additionally, age, education, sexual experience and migration had significant effects on accurate knowledge. Finally, living in poor households and disadvantaged neighborhoods significantly increased inaccurate knowledge of HIV transmission modes and prevention strategies. This paper evidenced the limited effects of HIV interventions/programmes in sub-Saharan Africa. Indeed, few

  17. Dating of a representative pottery sample from the basin of Sayula, Jalisco in Mexico using the thermoluminescence method

    Energy Technology Data Exchange (ETDEWEB)

    Mercado U, H. [CINVESTAV, Unidad Monterrey, Nuevo Leon (Mexico); Schaaf, P.; Ramirez, A. [Instituto de Geofisica, UNAM, 04510 Mexico D.F. (Mexico); Gonzalez, P.R. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico); Brunet, J. [CUCSH, Universidad de Guadalajara, Jalisco (Mexico)

    2006-07-01

    In this work is presented a study of dating of the representative pottery sample from the west of Mexico, in a predominantly saline region. The study is carried out with the thermoluminescence method and the fine grain technique. The archaeological region was begun to study from 1990. This work also presents an historical and geographical context of the region and its relevance in the western culture of Mexico. (Author)

  18. Dating of a representative pottery sample from the basin of Sayula, Jalisco in Mexico using the thermoluminescence method

    International Nuclear Information System (INIS)

    Mercado U, H.; Schaaf, P.; Ramirez, A.; Gonzalez, P.R.; Brunet, J.

    2006-01-01

    In this work is presented a study of dating of the representative pottery sample from the west of Mexico, in a predominantly saline region. The study is carried out with the thermoluminescence method and the fine grain technique. The archaeological region was begun to study from 1990. This work also presents an historical and geographical context of the region and its relevance in the western culture of Mexico. (Author)

  19. A multiple regression analysis for accurate background subtraction in 99Tcm-DTPA renography

    International Nuclear Information System (INIS)

    Middleton, G.W.; Thomson, W.H.; Davies, I.H.; Morgan, A.

    1989-01-01

    A technique for accurate background subtraction in 99 Tc m -DTPA renography is described. The technique is based on a multiple regression analysis of the renal curves and separate heart and soft tissue curves which together represent background activity. It is compared, in over 100 renograms, with a previously described linear regression technique. Results show that the method provides accurate background subtraction, even in very poorly functioning kidneys, thus enabling relative renal filtration and excretion to be accurately estimated. (author)

  20. Acrolein and asthma attack prevalence in a representative sample of the United States adult population 2000-2009.

    Science.gov (United States)

    deCastro, B Rey

    2014-01-01

    Acrolein is an air toxic and highly potent respiratory irritant. There is little epidemiology available, but US EPA estimates that outdoor acrolein is responsible for about 75 percent of non-cancer respiratory health effects attributable to air toxics in the United States, based on the Agency's 2005 NATA (National-Scale Air Toxics Assessment) and acrolein's comparatively potent inhalation reference concentration of 0.02 µg/m3. Assess the association between estimated outdoor acrolein exposure and asthma attack reported by a representative cross-sectional sample of the adult United States population. NATA 2005 chronic outdoor acrolein exposure estimates at the census tract were linked with residences oif adults (≥18 years old) in the NHIS (National Health Interview Survey) 2000-2009 (n = 271,348 subjects). A sample-weighted logistic regression model characterized the association between the prevalence of reporting at least one asthma attack in the 12 months prior to survey interview and quintiles of exposure to outdoor acrolein, controlling for potential confounders. In the highest quintile of outdoor acrolein exposure (0.05-0.46 µg/m3), there was a marginally significant increase in the asthma attack pOR (prevalence-odds ratio [95% CI]  = 1.08 [0.98∶1.19]) relative to the lowest quintile. The highest quintile was also associated with a marginally significant increase in prevalence-odds (1.13 [0.98∶1.29]) in a model limited to never smokers (n = 153,820). Chronic exposure to outdoor acrolein of 0.05-0.46 µg/m3 appears to increase the prevalence-odds of having at least one asthma attack in the previous year by 8 percent in a representative cross-sectional sample of the adult United States population.

  1. Acrolein and asthma attack prevalence in a representative sample of the United States adult population 2000-2009.

    Directory of Open Access Journals (Sweden)

    B Rey deCastro

    Full Text Available BACKGROUND: Acrolein is an air toxic and highly potent respiratory irritant. There is little epidemiology available, but US EPA estimates that outdoor acrolein is responsible for about 75 percent of non-cancer respiratory health effects attributable to air toxics in the United States, based on the Agency's 2005 NATA (National-Scale Air Toxics Assessment and acrolein's comparatively potent inhalation reference concentration of 0.02 µg/m3. OBJECTIVES: Assess the association between estimated outdoor acrolein exposure and asthma attack reported by a representative cross-sectional sample of the adult United States population. METHODS: NATA 2005 chronic outdoor acrolein exposure estimates at the census tract were linked with residences oif adults (≥18 years old in the NHIS (National Health Interview Survey 2000-2009 (n = 271,348 subjects. A sample-weighted logistic regression model characterized the association between the prevalence of reporting at least one asthma attack in the 12 months prior to survey interview and quintiles of exposure to outdoor acrolein, controlling for potential confounders. RESULTS: In the highest quintile of outdoor acrolein exposure (0.05-0.46 µg/m3, there was a marginally significant increase in the asthma attack pOR (prevalence-odds ratio [95% CI]  = 1.08 [0.98∶1.19] relative to the lowest quintile. The highest quintile was also associated with a marginally significant increase in prevalence-odds (1.13 [0.98∶1.29] in a model limited to never smokers (n = 153,820. CONCLUSIONS: Chronic exposure to outdoor acrolein of 0.05-0.46 µg/m3 appears to increase the prevalence-odds of having at least one asthma attack in the previous year by 8 percent in a representative cross-sectional sample of the adult United States population.

  2. Examining the "Veggie" personality: Results from a representative German sample.

    Science.gov (United States)

    Pfeiler, Tamara M; Egloff, Boris

    2018-01-01

    An increasing proportion of people choose to follow a vegetarian diet. To date, however, little is known about if and how individual differences in personality relate to following a vegetarian diet. In the two studies presented here, we aimed to (1) estimate the prevalence of self-defined vegetarians in two waves of a German representative sample (N = 4496 and 5125, respectively), (2) analyze the effect of socio-demographic variables on dietary behavior, and (3) examine individual differences between vegetarians and meat eaters in personality traits, political attitudes, and health-related variables. In Study 1, a strict definition of vegetarians was used, while in Study 2 the definition was laxer, to include also individuals who only predominantly followed a vegetarian diet. The prevalence of self-defined vegetarians was 2.74% in Study 1, and 5.97% in Study 2. Participants who were female, younger, and more educated were more likely to report following a vegetarian diet in both studies, and vegetarians had higher income as compared to meat eaters in Study 2. We also found differences between vegetarians and meat eaters with regard to personality traits, political attitudes, and health-related variables. Stepwise logistic regression analyses showed a unique effect beyond socio-demographic variables for openness (Studies 1 and 2), conscientiousness (Study 1), trust (Study 2), conservatism (Studies 1 and 2), and level of interest in politics (Study 1) on diet: Individuals with higher scores in openness and political interest had a higher probability of being vegetarian, whereas people with higher scores in conscientiousness and conservatism had a smaller likelihood of being vegetarian. We conclude that there are individual differences between vegetarians and meat eaters in socio-demographics, personality traits, and political attitudes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Iron status and its determinants in a nationally representative sample of pregnant women.

    Science.gov (United States)

    Vandevijvere, Stefanie; Amsalkhir, Sihame; Van Oyen, Herman; Egli, Ines; Ines, Egli; Moreno-Reyes, Rodrigo

    2013-05-01

    Iron-deficiency anemia is associated with adverse neonatal health outcomes. Iron status and its determinants were assessed in a representative sample of Belgian pregnant women. Blood samples were collected and a questionnaire was completed face-to-face. Hemoglobin (Hb) and mean cell volume were measured using a Beckman Coulter Hematology Analyzer and serum ferritin (SF) and transferrin receptor (sTfr) concentrations by immunoassay. In total, 55 obstetric clinics and 1,311 pregnant women were included. Approximately 40% of third-trimester and 6% of first-trimester women had SF levels less than 15 μg/L. Approximately 21% of third-trimester and 4% of first-trimester women had anemia (Hb 8.5 mg/L). The median body iron stores were 8.1 mg/kg among first-trimester women, but only 3.6 mg/kg among third-trimester women. SF levels were significantly positively associated with age and education level, and were higher among nulliparous women and lower among North-African women. sTfr concentrations were significantly negatively associated with age and were lower among smokers, nulliparous women, and women who planned their pregnancy. Despite the fact that two thirds of Belgian pregnant women took iron-containing supplements, iron deficiency and iron-deficiency anemia were frequent in third-trimester women. The World Health Organization regards this as a moderate public health problem. National iron supplementation guidelines are needed in Belgium to optimize iron status during pregnancy. Copyright © 2013 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  4. An Accurate and Dynamic Computer Graphics Muscle Model

    Science.gov (United States)

    Levine, David Asher

    1997-01-01

    A computer based musculo-skeletal model was developed at the University in the departments of Mechanical and Biomedical Engineering. This model accurately represents human shoulder kinematics. The result of this model is the graphical display of bones moving through an appropriate range of motion based on inputs of EMGs and external forces. The need existed to incorporate a geometric muscle model in the larger musculo-skeletal model. Previous muscle models did not accurately represent muscle geometries, nor did they account for the kinematics of tendons. This thesis covers the creation of a new muscle model for use in the above musculo-skeletal model. This muscle model was based on anatomical data from the Visible Human Project (VHP) cadaver study. Two-dimensional digital images from the VHP were analyzed and reconstructed to recreate the three-dimensional muscle geometries. The recreated geometries were smoothed, reduced, and sliced to form data files defining the surfaces of each muscle. The muscle modeling function opened these files during run-time and recreated the muscle surface. The modeling function applied constant volume limitations to the muscle and constant geometry limitations to the tendons.

  5. Air sampling in the workplace

    International Nuclear Information System (INIS)

    Hickey, E.E.; Stoetzel, G.A.; Strom, D.J.; Cicotte, G.R.; Wiblin, C.M.; McGuire, S.A.

    1993-09-01

    This report provides technical information on air sampling that will be useful for facilities following the recommendations in the NRC's Regulatory Guide 8.25, Revision 1, ''Air sampling in the Workplace.'' That guide addresses air sampling to meet the requirements in NRC's regulations on radiation protection, 10 CFR Part 20. This report describes how to determine the need for air sampling based on the amount of material in process modified by the type of material, release potential, and confinement of the material. The purposes of air sampling and how the purposes affect the types of air sampling provided are discussed. The report discusses how to locate air samplers to accurately determine the concentrations of airborne radioactive materials that workers will be exposed to. The need for and the methods of performing airflow pattern studies to improve the accuracy of air sampling results are included. The report presents and gives examples of several techniques that can be used to evaluate whether the airborne concentrations of material are representative of the air inhaled by workers. Methods to adjust derived air concentrations for particle size are described. Methods to calibrate for volume of air sampled and estimate the uncertainty in the volume of air sampled are described. Statistical tests for determining minimum detectable concentrations are presented. How to perform an annual evaluation of the adequacy of the air sampling is also discussed

  6. Health Correlates of Insomnia Symptoms and Comorbid Mental Disorders in a Nationally Representative Sample of US Adolescents

    Science.gov (United States)

    Blank, Madeleine; Zhang, Jihui; Lamers, Femke; Taylor, Adrienne D.; Hickie, Ian B.; Merikangas, Kathleen R.

    2015-01-01

    Study Objectives: To estimate the prevalence and health correlates of insomnia symptoms and their association with comorbid mental disorders in a nationally representative sample of adolescents in the United States. Design: National representative cross-sectional study. Setting: Population-based sample from the US adolescents. Measurements and Results: A total of 6,483 individuals aged between 13–18 y in the National Comorbidity Survey-Adolescent Supplement (NCS-A) with both individual and parental reports of mental health were included in this study. Participants were classified with insomnia symptoms if they reported difficulty initiating sleep, difficulty maintaining sleep, and/or early morning awakening, nearly every day for at least 2 w in the past year. Nearly one-third of adolescents reported insomnia symptoms for at least 2 w during the previous year. Hispanic and black youth were significantly more likely to report insomnia symptoms (42.0% and 41.3%, respectively) than non-Hispanic white youth (30.4%). Adolescents with insomnia symptoms were at a higher risk for all classes of mental disorders {odds ratio [OR] (95% confidence interval [CI]: 3.4 (2.9–4.0)} including mood, anxiety, behavioral, substance use, and eating disorders, suicidality [OR (95% CI): 2.63 (1.34–5.16)], poor perceived mental health [OR (95% CI): 2.01 (1.02–3.96)], chronic medical conditions [OR (95% CI): 1.94 (1.55–2.43)], smoking [OR (95% CI: 2.60 (1.00–6.72)], and obesity [OR (95% CI: 1.46 (1.10–1.93)] than those without insomnia symptoms. Adolescents with insomnia symptoms and comorbid mental disorders manifested even greater rates of these indicators of negative health behaviors and disorders than those with mental disorders alone (P Insomnia symptoms are reported by one-third of adolescents in the general population. Insomnia symptoms, even in the absence of concomitant depression or other mental disorders, are associated with serious health conditions, risk factors

  7. Association Between Objectively Measured Physical Activity and Erectile Dysfunction among a Nationally Representative Sample of American Men.

    Science.gov (United States)

    Loprinzi, Paul D; Edwards, Meghan

    2015-09-01

    Emerging work suggests an inverse association between physical activity and erectile dysfunction (ED). The majority of this cross-sectional research comes from convenience samples and all studies on this topic have employed self-report physical activity methodology. Therefore, the purpose of this brief-report, confirmatory research study was to examine the association between objectively measured physical activity and ED in a national sample of Americans. Data from the 2003-2004 National Health and Nutrition Examination Survey were used. Six hundred ninety-two adults between the ages of 50 and 85 years (representing 33.2 million adults) constituted the analytic sample. Participants wore an ActiGraph 7164 accelerometer (ActiGraph, Pensacola, FL, USA) for up to 7 days with ED assessed via self-report. The main outcome measure used was ED assessed via self-report. After adjustments, for every 30 min/day increase in moderate-to-vigorous physical activity, participants had a 43% reduced odds of having ED (odds ratioadjusted  = 0.57; 95% confidence interval: 0.40-0.81; P = 0.004). This confirmatory study employing an objective measure of physical activity in a national sample suggests an inverse association between physical activity and ED. © 2015 International Society for Sexual Medicine.

  8. Relationship of personality disorders to the course of major depressive disorder in a nationally representative sample.

    Science.gov (United States)

    Skodol, Andrew E; Grilo, Carlos M; Keyes, Katherine M; Geier, Timothy; Grant, Bridget F; Hasin, Deborah S

    2011-03-01

    The purpose of this study was to examine the effects of specific personality disorder comorbidity on the course of major depressive disorder in a nationally representative sample. Data were drawn from 1,996 participants in a national survey. Participants who met criteria for major depressive disorder at baseline in face-to-face interviews (in 2001-2002) were reinterviewed 3 years later (in 2004-2005) to determine persistence and recurrence. Predictors included all DSM-IV personality disorders. Control variables included demographic characteristics, other axis I disorders, family and treatment histories, and previously established predictors of the course of major depressive disorder. A total of 15.1% of participants had persistent major depressive disorder, and 7.3% of those who remitted had a recurrence. Univariate analyses indicated that avoidant, borderline, histrionic, paranoid, schizoid, and schizotypal personality disorders all elevated the risk for persistence. With axis I comorbidity controlled, all personality disorders except histrionic personality disorder remained significant. With all other personality disorders controlled, borderline and schizotypal disorders remained significant predictors. In final, multivariate analyses that controlled for age at onset of major depressive disorder, the number of previous episodes, duration of the current episode, family history, and treatment, borderline personality disorder remained a robust predictor of major depressive disorder persistence. Neither personality disorders nor other clinical variables predicted recurrence. In this nationally representative sample of adults with major depressive disorder, borderline personality disorder robustly predicted persistence, a finding that converges with recent clinical studies. Personality psychopathology, particularly borderline personality disorder, should be assessed in all patients with major depressive disorder, considered in prognosis, and addressed in treatment.

  9. Relationship of Personality Disorders to the Course of Major Depressive Disorder in a Nationally Representative Sample

    Science.gov (United States)

    Skodol, Andrew E.; Grilo, Carlos M.; Keyes, Katherine; Geier, Timothy; Grant, Bridget F.; Hasin, Deborah S.

    2011-01-01

    Objective The purpose of this study was to examine the effects of specific personality disorder co-morbidity on the course of major depressive disorder in a nationally-representative sample. Method Data were drawn from 1,996 participants in a national survey. Participants who met criteria for major depressive disorder at baseline in face-to-face interviews (2001–2002) were re-interviewed three years later (2004–2005) to determine persistence and recurrence. Predictors included all DSM-IV personality disorders. Control variables included demographic characteristics, other Axis I disorders, family and treatment histories, and previously established predictors of the course of major depressive disorder. Results 15.1% of participants had persistent major depressive disorder and 7.3% of those who remitted had a recurrence. Univariate analyses indicated that avoidant, borderline, histrionic, paranoid, schizoid, and schizotypal personality disorders all elevated the risk for persistence. With Axis I co-morbidity controlled, all but histrionic personality disorder remained significant. With all other personality disorders controlled, borderline and schizotypal remained significant predictors. In final, multivariate analyses that controlled for age at onset of major depressive disorder, number of previous episodes, duration of current episode, family history, and treatment, borderline personality disorder remained a robust predictor of major depressive disorder persistence. Neither personality disorders nor other clinical variables predicted recurrence. Conclusions In this nationally-representative sample of adults with major depressive disorder, borderline personality disorder robustly predicted persistence, a finding that converges with recent clinical studies. Personality psychopathology, particularly borderline personality disorder, should be assessed in all patients with major depressive disorder, considered in prognosis, and addressed in treatment. PMID:21245088

  10. Viewing child pornography: prevalence and correlates in a representative community sample of young Swedish men.

    Science.gov (United States)

    Seto, Michael C; Hermann, Chantal A; Kjellgren, Cecilia; Priebe, Gisela; Svedin, Carl Göran; Långström, Niklas

    2015-01-01

    Most research on child pornography use has been based on selected clinical or criminal justice samples; risk factors for child pornography use in the general population remain largely unexplored. In this study, we examined prevalence, risk factors, and correlates of viewing depictions of adult-child sex in a population-representative sample of 1,978 young Swedish men (17-20 years, Mdn = 18 years, overall response rate, 77 %). In an anonymous, school-based survey, participants self-reported sexual coercion experiences, attitudes and beliefs about sex, perceived peer attitudes, and sexual interests and behaviors; including pornography use, sexual interest in children, and sexually coercive behavior. A total of 84 (4.2 %) young men reported they had ever viewed child pornography. Most theory-based variables were moderately and significantly associated with child pornography viewing and were consistent with models of sexual offending implicating both antisociality and sexual deviance. In multivariate logistic regression analysis, 7 of 15 tested factors independently predicted child pornography viewing and explained 42 % of the variance: ever had sex with a male, likely to have sex with a child aged 12-14, likely to have sex with a child 12 or less, perception of children as seductive, having friends who have watched child pornography, frequent pornography use, and ever viewed violent pornography. From these, a 6-item Child Pornography Correlates Scale was constructed and then cross-validated in a similar but independent Norwegian sample.

  11. A computational study of a fast sampling valve designed to sample soot precursors inside a forming diesel spray plume

    International Nuclear Information System (INIS)

    Dumitrescu, Cosmin; Puzinauskas, Paulius V.; Agrawal, Ajay K.; Liu, Hao; Daly, Daniel T.

    2009-01-01

    Accurate chemical reaction mechanisms are critically needed to fully optimize combustion strategies for modern internal-combustion engines. These mechanisms are needed to predict emission formation and the chemical heat release characteristics for traditional direct-injection diesel as well as recently-developed and proposed variant combustion strategies. Experimental data acquired under conditions representative of such combustion strategies are required to validate these reaction mechanisms. This paper explores the feasibility of developing a fast sampling valve which extracts reactants at known locations in the spray reaction structure to provide these data. CHEMKIN software is used to establish the reaction timescales which dictate the required fast sampling capabilities. The sampling process is analyzed using separate FLUENT and CHEMKIN calculations. The non-reacting FLUENT CFD calculations give a quantitative estimate of the sample quantity as well as the fluid mixing and thermal history. A CHEMKIN reactor network has been created that reflects these mixing and thermal time scales and allows a theoretical evaluation of the quenching process

  12. Association between intimate partner violence and child maltreatment in a representative student sample in Hong Kong.

    Science.gov (United States)

    Chan, Ko Ling

    2015-04-01

    The study examined the prevalence of the co-occurrence of intimate partner violence (IPV) and child maltreatment (CM) to determine whether IPV is a factor associated with the latter. A total of 5,841 students from a representative sample of schools in Hong Kong were surveyed. The results show that the lifetime and preceding-year co-occurrence rates of IPV and CM were 12.3% and 3.6%, respectively. IPV and parents' use of psychological aggression and corporal punishment led to increased odds of physical violence. This study suggests a need for the comprehensive assessment of IPV and CM. © The Author(s) 2015.

  13. Exploring the Relation between Prenatal and Neonatal Complications and Later Autistic-Like Features in a Representative Community Sample of Twins

    Science.gov (United States)

    Ronald, Angelica; Happe, Francesca; Dworzynski, Katharina; Bolton, Patrick; Plomin, Robert

    2010-01-01

    Prenatal and neonatal events were reported by parents of 13,690 eighteen-month-old twins enrolled in the Twins Early Development Study, a representative community sample born in England and Wales. At ages 7-8, parents and teachers completed questionnaires on social and nonsocial autistic-like features and parents completed the Childhood Asperger…

  14. Investigating sex differences in psychological predictors of snack intake among a large representative sample.

    Science.gov (United States)

    Adriaanse, Marieke A; Evers, Catharine; Verhoeven, Aukje A C; de Ridder, Denise T D

    2016-03-01

    It is often assumed that there are substantial sex differences in eating behaviour (e.g. women are more likely to be dieters or emotional eaters than men). The present study investigates this assumption in a large representative community sample while incorporating a comprehensive set of psychological eating-related variables. A community sample was employed to: (i) determine sex differences in (un)healthy snack consumption and psychological eating-related variables (e.g. emotional eating, intention to eat healthily); (ii) examine whether sex predicts energy intake from (un)healthy snacks over and above psychological variables; and (iii) investigate the relationship between psychological variables and snack intake for men and women separately. Snack consumption was assessed with a 7d snack diary; the psychological eating-related variables with questionnaires. Participants were members of an Internet survey panel that is based on a true probability sample of households in the Netherlands. Men and women (n 1292; 45 % male), with a mean age of 51·23 (sd 16·78) years and a mean BMI of 25·62 (sd 4·75) kg/m2. Results revealed that women consumed more healthy and less unhealthy snacks than men and they scored higher than men on emotional and restrained eating. Women also more often reported appearance and health-related concerns about their eating behaviour, but men and women did not differ with regard to external eating or their intentions to eat more healthily. The relationships between psychological eating-related variables and snack intake were similar for men and women, indicating that snack intake is predicted by the same variables for men and women. It is concluded that some small sex differences in psychological eating-related variables exist, but based on the present data there is no need for interventions aimed at promoting healthy eating to target different predictors according to sex.

  15. Extraordinary tunable dynamic range of electrochemical aptasensor for accurate detection of ochratoxin A in food samples

    Directory of Open Access Journals (Sweden)

    Lin Cheng

    2017-06-01

    Full Text Available We report the design of a sensitive, electrochemical aptasensor for detection of ochratoxin A (OTA with an extraordinary tunable dynamic sensing range. This electrochemical aptasensor is constructed based on the target induced aptamer-folding detection mechanism and the recognition between OTA and its aptamers results in the conformational change of the aptamer probe and thus signal changes for measurement. The dynamic sensing range of the electrochemical aptasensor is successfully tuned by introduction of free assistant aptamer probes in the sensing system. Our electrochemical aptasensor shows an extraordinary dynamic sensing range of 11-order magnitude of OTA concentration from 10−8 to 102 ng/g. Of great significance, the signal response in all OTA concentration ranges is at the same current scale, demonstrating that our sensing protocol in this research could be applied for accurate detections of OTA in a broad range without using any complicated treatment of signal amplification. Finally, OTA spiked red wine and maize samples in different dynamic sensing ranges are determined with the electrochemical aptasensor under optimized sensing conditions. This tuning strategy of dynamic sensing range may offer a promising platform for electrochemical aptasensor optimizations in practical applications.

  16. Accurate determination of light elements by charged particle activation analysis

    International Nuclear Information System (INIS)

    Shikano, K.; Shigematsu, T.

    1989-01-01

    To develop accurate determination of light elements by CPAA, accurate and practical standardization methods and uniform chemical etching are studied based on determination of carbon in gallium arsenide using the 12 C(d,n) 13 N reaction and the following results are obtained: (1)Average stopping power method with thick target yield is useful as an accurate and practical standardization method. (2)Front surface of sample has to be etched for accurate estimate of incident energy. (3)CPAA is utilized for calibration of light element analysis by physical method. (4)Calibration factor of carbon analysis in gallium arsenide using the IR method is determined to be (9.2±0.3) x 10 15 cm -1 . (author)

  17. Dietary Risk Factors by Race/Ethnicity, Age-Group, and Gender in a Representative Sample of US Older Adults.

    Science.gov (United States)

    Vaccaro, J A; Huffman, F G

    2017-01-01

    To explore the relationships among ethnicity/race, gender, demographics, age-group and dietary health in a nationally representative sample of older adults. Cross-sectional study. Data for this study were collected by interview in the mobile examination centers from the National Health and Nutrition Examination Surveys, 2011 - 2012. U.S. representative sample of adults aged 55 years and older (N = 1860) from five ethnic/racial groups. All participants read, understood, and signed informed consent forms under data collection procedures by trained individuals. Sociodemographics were collected by trained interviewers using a general questionnaire. Food groups were determined by 24-hour recall using the validated USDA Automated Multiple-Pass Method. Data were presented by cross-tabulation and logistic regression to investigate relationships among race/ethnicity, gender, and age groups. Over 70% of older adults failed to consume 2.75 cups of combined fruits and vegetables. Other Hispanics (Hispanics excluding Mexican Americans) had higher Odds of sugar-containing food consumption compared to non-Hispanic Whites (adjusted model). Being older and female were protective factors for over-consumption of sugar. Older Americans are not meeting dietary guidelines and there are differences by gender and ethnicity. Since diet has been associated with quality of life and medical costs, public health interventions can benefit by knowing age-, gender- and racial/ethnic- specific dietary behaviors.

  18. Satisfaction with life scale in a representative sample of Spanish adults: validation and normative data.

    Science.gov (United States)

    Vázquez, Carmelo; Duque, Almudena; Hervás, Gonzalo

    2013-01-01

    The Satisfaction with Life Scale (SWLS) is a measure widely used to assess life satisfaction. This paper aims to test its psychometric properties, factor structure, and distribution scores across age, gender, education, and employment status. For this purpose, a representative sample of the Spanish population (N = 2,964) was used. Although analyses showed no significant differences across age or gender, participants with higher education level and those who held an occupation were more satisfied with their lives. Confirmatory factor analysis revealed a unifactorial structure with significant correlations between the SWLS, and subjective happiness and social support. The internal consistency of the scale was .88. Thus, our results indicate that the Spanish version of the SWLS is a valid and reliable measure of life satisfaction within the Spanish context.

  19. Short version of the Zimbardo Time Perspective Inventory (ZTPI-short) with and without the Future-Negative scale, verified on nationally representative samples

    Czech Academy of Sciences Publication Activity Database

    Košťál, Jaroslav; Klicperová-Baker, Martina; Lukavská, K.; Lukavský, Jiří

    2016-01-01

    Roč. 25, č. 2 (2016), s. 169-192 ISSN 0961-463X Institutional support: RVO:68081740 Keywords : ZTPI * ZTPI-short * time perspective * temporal orientation * representative sample Subject RIV: AN - Psychology Impact factor: 1.206, year: 2016

  20. Highly Accurate Prediction of Jobs Runtime Classes

    OpenAIRE

    Reiner-Benaim, Anat; Grabarnick, Anna; Shmueli, Edi

    2016-01-01

    Separating the short jobs from the long is a known technique to improve scheduling performance. In this paper we describe a method we developed for accurately predicting the runtimes classes of the jobs to enable this separation. Our method uses the fact that the runtimes can be represented as a mixture of overlapping Gaussian distributions, in order to train a CART classifier to provide the prediction. The threshold that separates the short jobs from the long jobs is determined during the ev...

  1. Detecting representative data and generating synthetic samples to improve learning accuracy with imbalanced data sets.

    Directory of Open Access Journals (Sweden)

    Der-Chiang Li

    Full Text Available It is difficult for learning models to achieve high classification performances with imbalanced data sets, because with imbalanced data sets, when one of the classes is much larger than the others, most machine learning and data mining classifiers are overly influenced by the larger classes and ignore the smaller ones. As a result, the classification algorithms often have poor learning performances due to slow convergence in the smaller classes. To balance such data sets, this paper presents a strategy that involves reducing the sizes of the majority data and generating synthetic samples for the minority data. In the reducing operation, we use the box-and-whisker plot approach to exclude outliers and the Mega-Trend-Diffusion method to find representative data from the majority data. To generate the synthetic samples, we propose a counterintuitive hypothesis to find the distributed shape of the minority data, and then produce samples according to this distribution. Four real datasets were used to examine the performance of the proposed approach. We used paired t-tests to compare the Accuracy, G-mean, and F-measure scores of the proposed data pre-processing (PPDP method merging in the D3C method (PPDP+D3C with those of the one-sided selection (OSS, the well-known SMOTEBoost (SB study, and the normal distribution-based oversampling (NDO approach, and the proposed data pre-processing (PPDP method. The results indicate that the classification performance of the proposed approach is better than that of above-mentioned methods.

  2. Evaluation of mixing downstream of tees in duct systems with respect to single point representative air sampling.

    Science.gov (United States)

    Kim, Taehong; O'Neal, Dennis L; Ortiz, Carlos

    2006-09-01

    Air duct systems in nuclear facilities must be monitored with continuous sampling in case of an accidental release of airborne radionuclides. The purpose of this work is to identify the air sampling locations where the velocity and contaminant concentrations fall below the 20% coefficient of variation required by the American National Standards Institute/Health Physics Society N13.1-1999. Experiments of velocity and tracer gas concentration were conducted on a generic "T" mixing system which included combinations of three sub ducts, one main duct, and air velocities from 0.5 to 2 m s (100 to 400 fpm). The experimental results suggest that turbulent mixing provides the accepted velocity coefficients of variation after 6 hydraulic diameters downstream of the T-junction. About 95% of the cases achieved coefficients of variation below 10% by 6 hydraulic diameters. However, above a velocity ratio (velocity in the sub duct/velocity in the main duct) of 2, velocity profiles were uniform in a shorter distance downstream of the T-junction as the velocity ratio went up. For the tracer gas concentration, the distance needed for the coefficients of variation to drop 20% decreased with increasing velocity ratio due to the sub duct airflow momentum. The results may apply to other duct systems with similar geometries and, ultimately, be a basis for selecting a proper sampling location under the requirements of single point representative sampling.

  3. Creating a sampling frame for population-based veteran research: Representativeness and overlap of VA and Department of Defense databases

    OpenAIRE

    Donna L. Washington, MD, MPH; Su Sun, MPH; Mark Canning, BA

    2010-01-01

    Most veteran research is conducted in Department of Veterans Affairs (VA) healthcare settings, although most veterans obtain healthcare outside the VA. Our objective was to determine the adequacy and relative contributions of Veterans Health Administration (VHA), Veterans Benefits Administration (VBA), and Department of Defense (DOD) administrative databases for representing the U.S. veteran population, using as an example the creation of a sampling frame for the National Survey of Women Vete...

  4. Testing the main prediction of the Interpersonal Theory of Suicide in a representative sample of the German general population.

    Science.gov (United States)

    Glaesmer, Heide; Hallensleben, Nina; Forkmann, Thomas; Spangenberg, Lena; Kapusta, Nestor; Teismann, Tobias

    2017-03-15

    To evaluate the main prediction of the Interpersonal Theory of Suicide (IPTS): 3-way-interaction of perceived burdensomeness (PB), thwarted belongingness (TB), and acquired capability (AC) for the prediction of suicidal behavior in a representative population sample. A total of 2513 participants completed measures of suicidal behavior, TB, PB, acquired capability (AC-FAD), and symptoms of depression and anxiety. The two-way-interaction of TB and PB, and the three-way interaction of TB, PB and AC-FAD predict suicidality. Given the cross-sectional nature of the data, conclusions on causality should be handled carefully. The main prediction of the IPTS has been proven in a general population sample. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. How accurately are climatological characteristics and surface water and energy balances represented for the Colombian Caribbean Catchment Basin?

    Science.gov (United States)

    Hoyos, Isabel; Baquero-Bernal, Astrid; Hagemann, Stefan

    2013-09-01

    In Colombia, the access to climate related observational data is restricted and their quantity is limited. But information about the current climate is fundamental for studies on present and future climate changes and their impacts. In this respect, this information is especially important over the Colombian Caribbean Catchment Basin (CCCB) that comprises over 80 % of the population of Colombia and produces about 85 % of its GDP. Consequently, an ensemble of several datasets has been evaluated and compared with respect to their capability to represent the climate over the CCCB. The comparison includes observations, reconstructed data (CPC, Delaware), reanalyses (ERA-40, NCEP/NCAR), and simulated data produced with the regional climate model REMO. The capabilities to represent the average annual state, the seasonal cycle, and the interannual variability are investigated. The analyses focus on surface air temperature and precipitation as well as on surface water and energy balances. On one hand the CCCB characteristics poses some difficulties to the datasets as the CCCB includes a mountainous region with three mountain ranges, where the dynamical core of models and model parameterizations can fail. On the other hand, it has the most dense network of stations, with the longest records, in the country. The results can be summarised as follows: all of the datasets demonstrate a cold bias in the average temperature of CCCB. However, the variability of the average temperature of CCCB is most poorly represented by the NCEP/NCAR dataset. The average precipitation in CCCB is overestimated by all datasets. For the ERA-40, NCEP/NCAR, and REMO datasets, the amplitude of the annual cycle is extremely high. The variability of the average precipitation in CCCB is better represented by the reconstructed data of CPC and Delaware, as well as by NCEP/NCAR. Regarding the capability to represent the spatial behaviour of CCCB, temperature is better represented by Delaware and REMO, while

  6. Early menarche and childhood adversities in a nationally representative sample.

    Science.gov (United States)

    Henrichs, Kimberly L; McCauley, Heather L; Miller, Elizabeth; Styne, Dennis M; Saito, Naomi; Breslau, Joshua

    2014-01-01

    Epidemiological evidence suggests that early menarche, defined as onset of menses at age 11 or earlier, has increased in prevalence in recent birth cohorts and is associated with multiple poor medical and mental health outcomes in adulthood. There is evidence that childhood adversities occurring prior to menarche contribute to early menarche. Data collected in face-to-face interviews with a nationally representative sample of women age 18 and over (N = 3288), as part of the National Comorbidity Survey-Replication, were analyzed. Associations between pre-menarchal childhood adversities and menarche at age 11 or earlier were estimated in discrete time survival models with statistical adjustment for age at interview, ethnicity, and body mass index. Adversities investigated included physical abuse, sexual abuse, neglect, biological father absence from the home, other parent loss, parent mental illness, parent substance abuse, parent criminality, inter-parental violence, serious physical illness in childhood, and family economic adversity. Mean age at menarche varied across decadal birth cohorts (χ(2)₍₄₎ = 21.41, p Childhood adversities were also more common in younger than older cohorts. Of the 11 childhood adversities, 5 were associated with menarche at age 11 or earlier, with OR of 1.3 or greater. Each of these five adversities is associated with a 26% increase in the odds of early menarche (OR = 1.26, 95% CI 1.14-1.39). The relationship between childhood sexual abuse and early menarche was sustained after adjustment for co-occurring adversities. (OR = 1.77, 95% CI 1.21-2.6). Evidence from this study is consistent with hypothesized physiological effects of early childhood family environment on endocrine development. Childhood sexual abuse is the adversity most strongly associated with early menarche. However, because of the complex way that childhood adversities cluster within families, the more generalized influence of highly dysfunctional

  7. Fostering accurate HIV/AIDS knowledge among unmarried youths in Cameroon: Do family environment and peers matter?

    Directory of Open Access Journals (Sweden)

    Kuate Defo Barthelemy

    2011-05-01

    Full Text Available Abstract Background The last three decades have seen a series of HIV interventions in sub-Saharan Africa. However, youths still have a mixture of correct and incorrect HIV/AIDS knowledge of transmission routes and prevention strategies. Previous studies have identified parents and peers as the most important socializing agents for youths. This paper assesses the relationships between family structure, family/peer communication about sexuality and accurate knowledge of transmission routes and prevention strategies. Methods Data were drawn from the Cameroon Family Life and Health Survey (CFHS conducted in 2002. The CFHS collected information on a representative sample of 4 950 people aged 10 years and over nested within 1 765 selected households from the 75 localities forming the administrative prefecture of Bandjoun, using detailed questionnaires about family, HIV/AIDS/STDs knowledge, sexual behaviors, contraception, health, media exposure, household assets and neighborhood characteristics. The survey cooperation rates were high (97%. For the purpose of this study, a sub-sample of 2 028 unmarried youths aged 12 - 29 years was utilized. Results Overall, 42% of respondents reported accurate knowledge of documented HIV transmission routes whereas 21% of them had inaccurate knowledge such as AIDS can be transmitted through mosquito bites or casual contact with an infected person. Only 9% of respondents were knowledgeable about all HIV prevention strategies. Multivariate analyses showed that family structure, communication with parents/guardians and peers about sexual topics were significantly associated with accurate HIV knowledge. Additionally, age, education, sexual experience and migration had significant effects on accurate knowledge. Finally, living in poor households and disadvantaged neighborhoods significantly increased inaccurate knowledge of HIV transmission modes and prevention strategies. Conclusions This paper evidenced the limited

  8. Acrolein and Asthma Attack Prevalence in a Representative Sample of the United States Adult Population 2000 – 2009

    Science.gov (United States)

    deCastro, B. Rey

    2014-01-01

    Background Acrolein is an air toxic and highly potent respiratory irritant. There is little epidemiology available, but US EPA estimates that outdoor acrolein is responsible for about 75 percent of non-cancer respiratory health effects attributable to air toxics in the United States, based on the Agency's 2005 NATA (National-Scale Air Toxics Assessment) and acrolein's comparatively potent inhalation reference concentration of 0.02 µg/m3. Objectives Assess the association between estimated outdoor acrolein exposure and asthma attack reported by a representative cross-sectional sample of the adult United States population. Methods NATA 2005 chronic outdoor acrolein exposure estimates at the census tract were linked with residences oif adults (≥18 years old) in the NHIS (National Health Interview Survey) 2000 – 2009 (n = 271,348 subjects). A sample-weighted logistic regression model characterized the association between the prevalence of reporting at least one asthma attack in the 12 months prior to survey interview and quintiles of exposure to outdoor acrolein, controlling for potential confounders. Results In the highest quintile of outdoor acrolein exposure (0.05 – 0.46 µg/m3), there was a marginally significant increase in the asthma attack pOR (prevalence-odds ratio [95% CI]  = 1.08 [0.98∶1.19]) relative to the lowest quintile. The highest quintile was also associated with a marginally significant increase in prevalence-odds (1.13 [0.98∶1.29]) in a model limited to never smokers (n = 153,820). Conclusions Chronic exposure to outdoor acrolein of 0.05 – 0.46 µg/m3 appears to increase the prevalence-odds of having at least one asthma attack in the previous year by 8 percent in a representative cross-sectional sample of the adult United States population. PMID:24816802

  9. Socioeconomic determinants of bullying in the workplace: a national representative sample in Japan.

    Science.gov (United States)

    Tsuno, Kanami; Kawakami, Norito; Tsutsumi, Akizumi; Shimazu, Akihito; Inoue, Akiomi; Odagiri, Yuko; Yoshikawa, Toru; Haratani, Takashi; Shimomitsu, Teruichi; Kawachi, Ichiro

    2015-01-01

    Bullying in the workplace is an increasingly recognized threat to employee health. We sought to test three hypotheses related to the determinants of workplace bullying: power distance at work; safety climate; and frustration related to perceived social inequality. A questionnaire survey was administered to a nationally representative community-based sample of 5,000 residents in Japan aged 20-60 years. The questionnaire included questions about employment, occupation, company size, education, household income, and subjective social status (SSS). We inquired about both the witnessing and personal experience of workplace bullying during the past 30 days. Among 2,384 respondents, data were analyzed from 1,546 workers. Multiple logistic regression analyses were used to examine the social determinants of workplace bullying. Six percent and 15 percent of the total sample reported experiencing or witnessing workplace bullying, respectively. After adjusting for gender and age, temporary employees (Odds Ratio [OR]: 2.45 [95% Confidence Interval (CI) = 1.03-5.85]), junior high school graduates (OR: 2.62 [95%CI: 1.01-6.79]), workers with lowest household income (OR: 4.13 [95%CI:1.58-10.8]), and workers in the lowest SSS stratum (OR: 4.21 [95%CI:1.66-10.7]) were at increased risk of experiencing workplace bullying. When all variables were entered simultaneously in the model, a significant inverse association was observed between higher SSS and experiencing bullying (p = 0.002). Similarly in terms of witnessing bullying; SSS was significantly inversely associated (p = 0.017) while temporary employees reported a significantly higher risk of witnessing bullying compared to permanent workers (OR: 2.25 [95%CI:1.04 to 4.87]). The significant association between SSS and experiencing/witnessing workplace bullying supports the frustration hypothesis. The power distance hypothesis was also partly supported by the finding that temporary employees experienced a higher prevalence of

  10. Socioeconomic determinants of bullying in the workplace: a national representative sample in Japan.

    Directory of Open Access Journals (Sweden)

    Kanami Tsuno

    Full Text Available Bullying in the workplace is an increasingly recognized threat to employee health. We sought to test three hypotheses related to the determinants of workplace bullying: power distance at work; safety climate; and frustration related to perceived social inequality. A questionnaire survey was administered to a nationally representative community-based sample of 5,000 residents in Japan aged 20-60 years. The questionnaire included questions about employment, occupation, company size, education, household income, and subjective social status (SSS. We inquired about both the witnessing and personal experience of workplace bullying during the past 30 days. Among 2,384 respondents, data were analyzed from 1,546 workers. Multiple logistic regression analyses were used to examine the social determinants of workplace bullying. Six percent and 15 percent of the total sample reported experiencing or witnessing workplace bullying, respectively. After adjusting for gender and age, temporary employees (Odds Ratio [OR]: 2.45 [95% Confidence Interval (CI = 1.03-5.85], junior high school graduates (OR: 2.62 [95%CI: 1.01-6.79], workers with lowest household income (OR: 4.13 [95%CI:1.58-10.8], and workers in the lowest SSS stratum (OR: 4.21 [95%CI:1.66-10.7] were at increased risk of experiencing workplace bullying. When all variables were entered simultaneously in the model, a significant inverse association was observed between higher SSS and experiencing bullying (p = 0.002. Similarly in terms of witnessing bullying; SSS was significantly inversely associated (p = 0.017 while temporary employees reported a significantly higher risk of witnessing bullying compared to permanent workers (OR: 2.25 [95%CI:1.04 to 4.87]. The significant association between SSS and experiencing/witnessing workplace bullying supports the frustration hypothesis. The power distance hypothesis was also partly supported by the finding that temporary employees experienced a higher prevalence

  11. Sampling Development

    Science.gov (United States)

    Adolph, Karen E.; Robinson, Scott R.

    2011-01-01

    Research in developmental psychology requires sampling at different time points. Accurate depictions of developmental change provide a foundation for further empirical studies and theories about developmental mechanisms. However, overreliance on widely spaced sampling intervals in cross-sectional and longitudinal designs threatens the validity of…

  12. Victimization and adversity among children experiencing war-related parental absence or deployment in a nationally representative US sample.

    Science.gov (United States)

    Turner, Heather A; Finkelhor, David; Hamby, Sherry; Henly, Megan

    2017-05-01

    This study compares children and youth who have experienced lifetime war-related parental absence or deployment with those having no such history on a variety of victimization types, non-victimization adversity, trauma symptoms, and delinquency; and assesses whether cumulative adversity and victimization help to explain elevated emotional and behavioral problems among children of parents who have experienced war-related absence or deployment. The National Surveys of Children's Exposure to Violence (NatSCEV) are comprised of three cross-sectional telephone surveys conducted in 2008, 2011, and 2014. Data were collected on the experiences of children aged one month to seventeen years. In each survey, interviews were conducted with youth 10-17 years old and with caregivers of children 0-9 years old. The analyses use pooled data from all three U.S. nationally-representative samples (total sample size of 13,052). Lifetime parental war-related absence or deployment was a marker for elevated childhood exposure to a wide array of victimization and adversity types. Cumulative past year exposure to multiple forms of victimization and adversity fully explained elevated trauma symptoms and delinquency in this population of children. Given the breadth of victimization and adversity risk, children with histories of parental war-related absence or deployment, as well as their families, represent important target groups for broad-based prevention and interventions to reduce exposure and ameliorate consequences when it does occur. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Marital status as a candidate moderator variable of male-female differences in sexual jealousy: the need for representative population samples.

    Science.gov (United States)

    Voracek, M

    2001-04-01

    Evolutionary psychological theories predict pronounced and universal male-female differences in sexual jealousy. Recent cross-cultural research, using the forced-choice jealousy items pioneered by Buss, et al., 1992, repeatedly found a large sex differential on these self-report measures: men significantly more often than women choose their mate's imagined sexual infidelity to be more distressing or upsetting to them than an imagined emotional infidelity. However, this body of evidence is solely based on undergraduate samples and does not take into account demographic factors. This study examined male-female differences in sexual jealousy in a community sample (N = 335, Eastern Austria). Within a logistic regression model, with other variables controlled for, marital status was a stronger predictor for sexual jealousy than respondents' sex. Contrary to previous research, the sex differential's effect size was only modest. These findings stress the pitfalls of prematurely generalizing evidence from undergraduate samples to the general population and the need for representative population samples in this research area.

  14. Dietary intakes of pesticides based on community duplicate diet samples.

    Science.gov (United States)

    Melnyk, Lisa Jo; Xue, Jianping; Brown, G Gordon; McCombs, Michelle; Nishioka, Marcia; Michael, Larry C

    2014-01-15

    The calculation of dietary intake of selected pesticides was accomplished using food samples collected from individual representatives of a defined demographic community using a community duplicate diet approach. A community of nine participants was identified in Apopka, FL from which intake assessments of organophosphate (OP) and pyrethroid pesticides were made. From these nine participants, sixty-seven individual samples were collected and subsequently analyzed by gas chromatography/mass spectrometry. Measured concentrations were used to estimate dietary intakes for individuals and for the community. Individual intakes of total OP and pyrethroid pesticides ranged from 6.7 to 996 ng and 1.2 to 16,000 ng, respectively. The community intake was 256 ng for OPs and 3430 ng for pyrethroid pesticides. The most commonly detected pesticide was permethrin, but the highest overall intake was of bifenthrin followed by esfenvalerate. These data indicate that the community in Apopka, FL, as represented by the nine individuals, was potentially exposed to both OP and pyrethroid pesticides at levels consistent with a dietary model and other field studies in which standard duplicate diet samples were collected. Higher levels of pyrethroid pesticides were measured than OPs, which is consistent with decreased usage of OPs. The diversity of pyrethroid pesticides detected in food samples was greater than expected. Continually changing pesticide usage patterns need to be considered when determining analytes of interest for large scale epidemiology studies. The Community Duplicate Diet Methodology is a tool for researchers to meet emerging exposure measurement needs that will lead to more accurate assessments of intake which may enhance decisions for chemical regulation. Successfully determining the intake of pesticides through the dietary route will allow for accurate assessments of pesticide exposures to a community of individuals, thereby significantly enhancing the research benefit

  15. Testing of Small Graphite Samples for Nuclear Qualification

    Energy Technology Data Exchange (ETDEWEB)

    Julie Chapman

    2010-11-01

    Accurately determining the mechanical properties of small irradiated samples is crucial to predicting the behavior of the overal irradiated graphite components within a Very High Temperature Reactor. The sample size allowed in a material test reactor, however, is limited, and this poses some difficulties with respect to mechanical testing. In the case of graphite with a larger grain size, a small sample may exhibit characteristics not representative of the bulk material, leading to inaccuracies in the data. A study to determine a potential size effect on the tensile strength was pursued under the Next Generation Nuclear Plant program. It focuses first on optimizing the tensile testing procedure identified in the American Society for Testing and Materials (ASTM) Standard C 781-08. Once the testing procedure was verified, a size effect was assessed by gradually reducing the diameter of the specimens. By monitoring the material response, a size effect was successfully identified.

  16. Biomass Thermogravimetric Analysis: Uncertainty Determination Methodology and Sampling Maps Generation

    Science.gov (United States)

    Pazó, Jose A.; Granada, Enrique; Saavedra, Ángeles; Eguía, Pablo; Collazo, Joaquín

    2010-01-01

    The objective of this study was to develop a methodology for the determination of the maximum sampling error and confidence intervals of thermal properties obtained from thermogravimetric analysis (TG), including moisture, volatile matter, fixed carbon and ash content. The sampling procedure of the TG analysis was of particular interest and was conducted with care. The results of the present study were compared to those of a prompt analysis, and a correlation between the mean values and maximum sampling errors of the methods were not observed. In general, low and acceptable levels of uncertainty and error were obtained, demonstrating that the properties evaluated by TG analysis were representative of the overall fuel composition. The accurate determination of the thermal properties of biomass with precise confidence intervals is of particular interest in energetic biomass applications. PMID:20717532

  17. Child sexual abuse as a risk factor for teen dating violence: Findings from a representative sample of Quebec youth

    OpenAIRE

    Hébert, Martine; Moreau, Catherine; Blais, Martin; Lavoie, Francine; Guerrier, Mireille

    2016-01-01

    Child sexual abuse (CSA) is identified as a significant risk factor for later victimization in the context of adult intimate relationships, but less is known about the risk associated with CSA in early romantic relationships. This paper aims to document the association between CSA and teen dating victimization in a large representative sample of Quebec high-school students. As part of the Youths’ Romantic Relationships Project, 8,194 teens completed measures on CSA and psychological, physical...

  18. The prevalence of couple infertility in the United States from a male perspective: evidence from a nationally representative sample

    OpenAIRE

    Louis, Jean Fredo; Thoma, Marie E.; Sørensen, Ditte Nørbo; McLain, Alexander C.; King, Rosalind B.; Sundaram, Rajeshwari; Keiding, Niels; Buck Louis, Germaine M.

    2013-01-01

    Infertility is a couple based fecundity impairment, though population level research is largely based upon information reported by female partners. Of the few studies focusing on male partners, most focus on the utilization of infertility services rather than efforts to estimate the prevalence and determinants of infertility as reported by male partners. Data from a nationally-representative sample of men aged 15–44 years who participated in the 2002 National Survey of Family Growth (NSFG) we...

  19. Sex differences in the association between perceived stress and adiposity in a nationally representative sample.

    Science.gov (United States)

    Suglia, Shakira F; Pamplin, John R; Forde, Allana T; Shelton, Rachel C

    2017-10-01

    Prior studies examining the association between perceived stress and adiposity have reported mixed findings, and sex differences have largely not been examined. We examined the relationship between perceived stress and body mass index (BMI) and waist circumference in young adults in the National Longitudinal Study of Adolescent to Adult Health. Participants (mean age 29 years; N = 14,044) completed the short form of Cohen's Perceived Stress Scale during a home visit. Height, weight, and waist circumference were assessed during the same visit. BMI was calculated based on measured height and weight. In the sample, 52% were male and 65% were identified as white. In adjusted linear regression analyses, a sex by Perceived Stress Scale interaction was noted (P stress was statistically significantly associated with lower BMI (β: -0.09; standard error [SE]: 0.05) and was associated with lower waist circumference, although not statistically significant (β: -0.18; SE: 0.10) among men. No associations were noted among women. In this nationally representative sample of young adults, perceived stress was associated with lower levels of adiposity among men. Noted differences could be attributed to different behavioral and coping strategies in response to stress between men and women as well as biological mechanisms which should be explored further. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Sampling of suspended particulate matter using particle traps in the Rhône River: Relevance and representativeness for the monitoring of contaminants.

    Science.gov (United States)

    Masson, M; Angot, H; Le Bescond, C; Launay, M; Dabrin, A; Miège, C; Le Coz, J; Coquery, M

    2018-05-10

    Monitoring hydrophobic contaminants in surface freshwaters requires measuring contaminant concentrations in the particulate fraction (sediment or suspended particulate matter, SPM) of the water column. Particle traps (PTs) have been recently developed to sample SPM as cost-efficient, easy to operate and time-integrative tools. But the representativeness of SPM collected with PTs is not fully understood, notably in terms of grain size distribution and particulate organic carbon (POC) content, which could both skew particulate contaminant concentrations. The aim of this study was to evaluate the representativeness of SPM characteristics (i.e. grain size distribution and POC content) and associated contaminants (i.e. polychlorinated biphenyls, PCBs; mercury, Hg) in samples collected in a large river using PTs for differing hydrological conditions. Samples collected using PTs (n = 74) were compared with samples collected during the same time period by continuous flow centrifugation (CFC). The grain size distribution of PT samples shifted with increasing water discharge: the proportion of very fine silts (2-6 μm) decreased while that of coarse silts (27-74 μm) increased. Regardless of water discharge, POC contents were different likely due to integration by PT of high POC-content phytoplankton blooms or low POC-content flood events. Differences in PCBs and Hg concentrations were usually within the range of analytical uncertainties and could not be related to grain size or POC content shifts. Occasional Hg-enriched inputs may have led to higher Hg concentrations in a few PT samples (n = 4) which highlights the time-integrative capacity of the PTs. The differences of annual Hg and PCB fluxes calculated either from PT samples or CFC samples were generally below 20%. Despite some inherent limitations (e.g. grain size distribution bias), our findings suggest that PT sampling is a valuable technique to assess reliable spatial and temporal trends of particulate

  1. REPRESENTATIVE OF LGBTT IN PRINTED LOCAL PRESS GAZIANTEP SAMPLE (2009-2014

    Directory of Open Access Journals (Sweden)

    Fatma Yeşil

    2017-07-01

    Full Text Available The basic aim of the paper is an attempt to find out how Van Dijk's critical discourse analysis of LGBTT (Lesbian, Gay, Bisexual, Transvestite, Transsexual individuals who are represented at the local press. Sabah, Hâkimiyet, Express, Gaziantep27, Olay and Telgraf newspapers were selected from Gaziantep Printed Local Press for the study and how these LGBTT people were represented in these newspapers. The articles reviewed for the study were published between 2009 and 2014 is a key criterion for LGBTT people to be involved directly or indirectly (with links to various topics under different headings. In the context of Van Dijk's critical discourse analysis based on the study, and in the light of the determined criteria, the existing news obtained were carefully scanned from newspapers, examined and analyzed in detail by the method of critical discourse analysis.

  2. Sexual Violence Experienced in the Sport Context by a Representative Sample of Quebec Adolescents

    Science.gov (United States)

    Parent, Sylvie; Lavoie, Francine; Thibodeau, Marie-Ève; Hébert, Martine; Blais, Martin

    2016-01-01

    This is the first study to report the prevalence of sexual violence perpetrated by a sport coach within a representative sample of the general population of adolescents aged between 14 and 17 years (N = 6 450). The questionnaire administered in high schools includes self-reported measures on a variety of dimensions relevant to the study of victimization, including sexual abuse, sexual contacts perceived as consensual, sexual harassment and involvement in an organized sport context. Descriptive and chi-square analyses were performed. The results show that 0.5% of adolescents experienced sexual abuse involving a coach. When considering all adolescents who experienced sexual abuse in their lifetime (10.2%), it appears that 5.3% of them were victims of sexual abuse by a coach. Participants also reported experiencing sexual harassment from a coach (0.4%) and consensual sexual contacts (1.2%) with a coach in the 12 months preceeding the study. Questions are raised on the overrepresentation of boys in situations of sexual victimization experiences in an organized sport context. PMID:25873593

  3. Pathological narcissism and maladaptive self-regulatory behaviours in a nationally representative sample of Canadian men.

    Science.gov (United States)

    Kealy, David; Ogrodniczuk, John S; Rice, Simon M; Oliffe, John L

    2017-10-01

    Clinical observation has linked externalizing coping strategies such as substance overuse and aggressive behaviours with narcissistic personality dysfunction. This study examined the relationship between pathological narcissism and maladaptive self-regulatory behaviours among Canadian men. An online survey was distributed among a stratified, nationally representative sample of 1000 men from across Canada. The survey included brief self-report measures of pathological narcissism, maladaptive externalizing coping behaviours, and general psychological distress. After controlling for the effects of age and general psychological distress, pathological narcissism was found to be significantly associated with alcohol overuse and aggressive behaviour. Significant though modest interaction effects were found between pathological narcissism and age - with regards to drug use - and distress - with regards to risk-taking behaviour. The findings point to the need for attention to narcissistic dysfunction as a clinical and public health issue among men. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Gambling and violence in a nationally representative sample of UK men.

    Science.gov (United States)

    Roberts, Amanda; Coid, Jeremy; King, Robert; Murphy, Raegan; Turner, John; Bowden-Jones, Henrietta; Du Preez, Katie Palmer; Landon, Jason

    2016-12-01

    The relationship between violence and problem gambling in general population samples is under-researched and requires further attention to inform treatment and prevention efforts. We investigated the relationship between gambling problems and violence among men and sought to determine if the link can be accounted for by mental disorders, alcohol and drug dependence and impulsivity. A cross-sectional survey. A UK representative general population survey conducted in 2009. A total of 3025 UK men aged 18-64 years. Binary logistic regression was used to examine relationships. Outcome measures included gambling behaviour and self-reports of violence. Covariates included alcohol and drug dependence, mental illness, impulsivity and socio-demography. Problem gambling and probable pathological gambling were associated with increased odds of the perpetration of violence [adjusted odd ratios (AOR) = 3.09, confidence interval (CI) = 1.90-5.00 and 4.09, CI = 2.76-6.30, respectively] and a range of other behaviours, such as using a weapon (AORs = 4.93, CI = 2.52-9.63 and 6.33, CI = 3.52-11.38) and the perpetration of intimate partner violence (AOR = 9.80, CI =2.45-39.04). The results were attenuated when adjusted for comorbid mental illness and impulsivity, but remained statistically significant. Alcohol and drug dependence had the most impact; relationships were most attenuated when they added into the models, with the latter having the largest effect. Among men in the United Kingdom, self-reports of problem/pathological gambling remain predictive of a range of measures of violent behaviour after adjusting for alcohol and drug dependence, comorbid mental disorder and impulsivity; of the covariates, alcohol and drug dependence have the greatest effect in attenuating the gambling-violence association. © 2016 Society for the Study of Addiction.

  5. Investigating the link between liking versus wanting self-esteem and depression in a nationally representative sample of American adults.

    Science.gov (United States)

    Bushman, Brad J; Moeller, Scott J; Konrath, Sara; Crocker, Jennifer

    2012-10-01

    The self-esteem movement has been around since the 1970s, and may have influenced how much value people place on self-esteem. We predicted a negative relationship between age and the amount of value placed on self-esteem boosts. We also investigated the correlates of liking versus wanting self-esteem boosts (and other pleasant rewards) on depression. A nationally representative sample of American adults (N = 867) indicated how much they liked and wanted several pleasant rewards (i.e., sex, food, alcohol, money, friendship, self-esteem boost). They also completed a standardized measure of depressive symptoms. As expected, there was a negative relationship between age and valuing self-esteem boosts, sex, and alcohol. People with depressive symptoms wanted self-esteem boosts, even though they did not like them very much. Similar effects were obtained for depressive symptoms and alcohol and friendship. This is the first research to show that self-esteem boosts are more valued among a nationally representative sample of younger American adults. It also is the first research to explore the association between depression and the motivation to boost self-esteem. People with depressive symptoms want self-esteem, and may pursue it, but this pursuit may feel unrewarding because they do not derive pleasure from it. © 2012 The Authors. Journal of Personality © 2012, Wiley Periodicals, Inc.

  6. Accurate and noninvasive embryos screening during in vitro fertilization (IVF) assisted by Raman analysis of embryos culture medium Accurate and noninvasive embryos screening during IVF

    Science.gov (United States)

    Shen, A. G.; Peng, J.; Zhao, Q. H.; Su, L.; Wang, X. H.; Hu, J. M.; Yang, J.

    2012-04-01

    In combination with morphological evaluation tests, we employ Raman spectroscopy to select higher potential reproductive embryos during in vitro fertilization (IVF) based on chemical composition of embryos culture medium. In this study, 57 Raman spectra are acquired from both higher and lower quality embryos culture medium (ECM) from 10 patients which have been preliminarily confirmed by clinical assay. Data are fit by using a linear combination model of least squares method in which 12 basis spectra represent the chemical features of ECM. The final fitting coefficients provide insight into the chemical compositions of culture medium samples and are subsequently used as criterion to evaluate the quality of embryos. The relative fitting coefficients ratios of sodium pyruvate/albumin and phenylalanine/albumin seem act as key roles in the embryo screening, attaining 85.7% accuracy in comparison with clinical pregnancy. The good results demonstrate that Raman spectroscopy therefore is an important candidate for an accurate and noninvasive screening of higher quality embryos, which potentially decrease the time-consuming clinical trials during IVF.

  7. The Longitudinal Relation Between Peer Violent Victimization and Delinquency: Results From a National Representative Sample of U.S. Adolescents

    OpenAIRE

    Jackson, Corrie L.; Hanson, Rochelle F.; Amstadter, Ananda B.; Saunders, Benjamin E.; Kilpatrick, Dean G.

    2012-01-01

    Using a nationally representative sample of adolescents from the United States aged 12 to 17 years (Wave 1, n = 3,614; Wave 2, n = 2,511), this study examined (a) demographic and descriptive information about peer violent victimization (PVV); and (b) the longitudinal relation between a history of PVV and delinquency. Results indicated that 12.4% of adolescents reported lifetime exposure to PVV, and many of these adolescents with a previous history of PVV also reported exposure to other forms ...

  8. Representing vision and blindness.

    Science.gov (United States)

    Ray, Patrick L; Cox, Alexander P; Jensen, Mark; Allen, Travis; Duncan, William; Diehl, Alexander D

    2016-01-01

    There have been relatively few attempts to represent vision or blindness ontologically. This is unsurprising as the related phenomena of sight and blindness are difficult to represent ontologically for a variety of reasons. Blindness has escaped ontological capture at least in part because: blindness or the employment of the term 'blindness' seems to vary from context to context, blindness can present in a myriad of types and degrees, and there is no precedent for representing complex phenomena such as blindness. We explore current attempts to represent vision or blindness, and show how these attempts fail at representing subtypes of blindness (viz., color blindness, flash blindness, and inattentional blindness). We examine the results found through a review of current attempts and identify where they have failed. By analyzing our test cases of different types of blindness along with the strengths and weaknesses of previous attempts, we have identified the general features of blindness and vision. We propose an ontological solution to represent vision and blindness, which capitalizes on resources afforded to one who utilizes the Basic Formal Ontology as an upper-level ontology. The solution we propose here involves specifying the trigger conditions of a disposition as well as the processes that realize that disposition. Once these are specified we can characterize vision as a function that is realized by certain (in this case) biological processes under a range of triggering conditions. When the range of conditions under which the processes can be realized are reduced beyond a certain threshold, we are able to say that blindness is present. We characterize vision as a function that is realized as a seeing process and blindness as a reduction in the conditions under which the sight function is realized. This solution is desirable because it leverages current features of a major upper-level ontology, accurately captures the phenomenon of blindness, and can be

  9. Determining Sample Size for Accurate Estimation of the Squared Multiple Correlation Coefficient.

    Science.gov (United States)

    Algina, James; Olejnik, Stephen

    2000-01-01

    Discusses determining sample size for estimation of the squared multiple correlation coefficient and presents regression equations that permit determination of the sample size for estimating this parameter for up to 20 predictor variables. (SLD)

  10. Psychometric properties of the Hare Psychopathy Checklist-Revised (PCL-R) in a representative sample of Canadian federal offenders.

    Science.gov (United States)

    Storey, Jennifer E; Hart, Stephen D; Cooke, David J; Michie, Christine

    2016-04-01

    The Hare Psychopathy Checklist-Revised (PCL-R; Hare, 2003) is a commonly used psychological test for assessing traits of psychopathic personality disorder. Despite the abundance of research using the PCL-R, the vast majority of research used samples of convenience rather than systematic methods to minimize sampling bias and maximize the generalizability of findings. This potentially complicates the interpretation of test scores and research findings, including the "norms" for offenders from the United States and Canada included in the PCL-R manual. In the current study, we evaluated the psychometric properties of PCL-R scores for all male offenders admitted to a regional reception center of the Correctional Service of Canada during a 1-year period (n = 375). Because offenders were admitted for assessment prior to institutional classification, they comprise a sample that was heterogeneous with respect to correctional risks and needs yet representative of all offenders in that region of the service. We examined the distribution of PCL-R scores, classical test theory indices of its structural reliability, the factor structure of test items, and the external correlates of test scores. The findings were highly consistent with those typically reported in previous studies. We interpret these results as indicating it is unlikely any sampling limitations of past research using the PCL-R resulted in findings that were, overall, strongly biased or unrepresentative. (c) 2016 APA, all rights reserved).

  11. Under-five mortality among mothers employed in agriculture: findings from a nationally representative sample

    Directory of Open Access Journals (Sweden)

    Rajvir Singh

    2015-01-01

    Full Text Available Background. India accounts for 24% to all under-five mortality in the world. Residence in rural area, poverty and low levels of mother’s education are known confounders of under-five mortality. Since two-thirds of India’s population lives in rural areas, mothers employed in agriculture present a particularly vulnerable population in the Indian context and it is imperative that concerns of this sizeable population are addressed in order to achieve MDG4 targets of reducing U5MR to fewer than 41 per 1,000 by 2015. This study was conducted to examine factors associated with under-five mortality among mothers employed in agriculture.Methods. Data was retrieved from National Family Household Survey-3 in India (2008. The study population is comprised of a national representative sample of single children aged 0 to 59 months and born to mothers aged 15 to 49 years employed in agriculture from all 29 states of India. Univariate and Multivariate Cox PH regression analysis was used to analyse the Hazard Rates of mortality. The predictive power of child mortality among mothers employed in agriculture was assessed by calculating the area under the receiver operating characteristic (ROC curve.Results. An increase in mothers’ ages corresponds with a decrease in child mortality. Breastfeeding reduces child mortality by 70% (HR 0.30, 0.25–0.35, p = 0.001. Standard of Living reduces child mortality by 32% with high standard of living (HR 0.68, 0.52–0.89, 0.001 in comparison to low standard of living. Prenatal care (HR 0.40, 0.34–0.48, p = 0.001 and breastfeeding health nutrition education (HR 0.45, 0.31–0.66, p = 0.001 are associated significant factors for child mortality. Birth Order five is a risk factor for mortality (HR 1.49, 1.05–2.10, p = 0.04 in comparison to Birth Order one among women engaged in agriculture while the household size (6–10 members and ≥ 11 members is significant in reducing child mortality in comparison to ≤5 members

  12. Under-five mortality among mothers employed in agriculture: findings from a nationally representative sample.

    Science.gov (United States)

    Singh, Rajvir; Tripathi, Vrijesh

    2015-01-01

    Background. India accounts for 24% to all under-five mortality in the world. Residence in rural area, poverty and low levels of mother's education are known confounders of under-five mortality. Since two-thirds of India's population lives in rural areas, mothers employed in agriculture present a particularly vulnerable population in the Indian context and it is imperative that concerns of this sizeable population are addressed in order to achieve MDG4 targets of reducing U5MR to fewer than 41 per 1,000 by 2015. This study was conducted to examine factors associated with under-five mortality among mothers employed in agriculture. Methods. Data was retrieved from National Family Household Survey-3 in India (2008). The study population is comprised of a national representative sample of single children aged 0 to 59 months and born to mothers aged 15 to 49 years employed in agriculture from all 29 states of India. Univariate and Multivariate Cox PH regression analysis was used to analyse the Hazard Rates of mortality. The predictive power of child mortality among mothers employed in agriculture was assessed by calculating the area under the receiver operating characteristic (ROC) curve. Results. An increase in mothers' ages corresponds with a decrease in child mortality. Breastfeeding reduces child mortality by 70% (HR 0.30, 0.25-0.35, p = 0.001). Standard of Living reduces child mortality by 32% with high standard of living (HR 0.68, 0.52-0.89, 0.001) in comparison to low standard of living. Prenatal care (HR 0.40, 0.34-0.48, p = 0.001) and breastfeeding health nutrition education (HR 0.45, 0.31-0.66, p = 0.001) are associated significant factors for child mortality. Birth Order five is a risk factor for mortality (HR 1.49, 1.05-2.10, p = 0.04) in comparison to Birth Order one among women engaged in agriculture while the household size (6-10 members and ≥ 11 members) is significant in reducing child mortality in comparison to ≤5 members in the house. Under

  13. Gambling Type, Substance Abuse, Health and Psychosocial Correlates of Male and Female Problem Gamblers in a Nationally Representative French Sample.

    Science.gov (United States)

    Bonnaire, C; Kovess-Masfety, V; Guignard, R; Richard, J B; du Roscoät, E; Beck, F

    2017-06-01

    Many studies carried out on treatment-seeking problem gamblers (PG) have reported high levels of comorbid substance use disorders, and mental and physical health problems. Nevertheless, general population studies are still sparse, most of them have been carried out in the United States or Canada, and gender differences have not always been considered. Thus, the aim of this study was to describe the type of games, and psychological and physical correlates in male and female PG in a nationally representative French sample. The total sample studied involved 25,647 subjects aged 15-85 years, including 333 PG and 25,314 non-problem gamblers (NPG). Data were extracted from a large survey of a representative sample of the French general population. They were evaluated for sociodemographic variables, gambling behavior, type of gambling activity, substance use, psychological distress, body mass index, chronic disease, and lack of sleep. Overall, there were significant differences between PG and NPG in gender, age, education, employment and marital status, substance use disorders (alcohol, tobacco, cannabis, cocaine and heroin), psychological distress, obesity, lack of sleep and type of gambling activity. Although male and female PG had different profiles, the gambling type, especially strategic games, appeared as an important variable in the relationship between gender and problem gambling. This research underlines the importance of considering gender differences and gambling type in the study of gambling disorders. Identifying specific factors in the relationship between gender, gambling type and gambling problems may help improve clinical interventions and health promotion strategies.

  14. Are Video Games a Gateway to Gambling? A Longitudinal Study Based on a Representative Norwegian Sample.

    Science.gov (United States)

    Molde, Helge; Holmøy, Bjørn; Merkesdal, Aleksander Garvik; Torsheim, Torbjørn; Mentzoni, Rune Aune; Hanns, Daniel; Sagoe, Dominic; Pallesen, Ståle

    2018-06-05

    The scope and variety of video games and monetary gambling opportunities are expanding rapidly. In many ways, these forms of entertainment are converging on digital and online video games and gambling sites. However, little is known about the relationship between video gaming and gambling. The present study explored the possibility of a directional relationship between measures of problem gaming and problem gambling, while also controlling for the influence of sex and age. In contrast to most previous investigations which are based on cross-sectional designs and non-representative samples, the present study utilized a longitudinal design conducted over 2 years (2013, 2015) and comprising 4601 participants (males 47.2%, age range 16-74) drawn from a random sample from the general population. Video gaming and gambling were assessed using the Gaming Addiction Scale for Adolescents and the Canadian Problem Gambling Index, respectively. Using an autoregressive cross-lagged structural equation model, we found a positive relationship between scores on problematic gaming and later scores on problematic gambling, whereas we found no evidence of the reverse relationship. Hence, video gaming problems appear to be a gateway behavior to problematic gambling behavior. In future research, one should continue to monitor the possible reciprocal behavioral influences between gambling and video gaming.

  15. Internet Addiction Among Elementary and Middle School Students in China: A Nationally Representative Sample Study

    Science.gov (United States)

    Li, Yajun; Zhang, Xinghui; Lu, Furong; Zhang, Qin

    2014-01-01

    Abstract The purpose of this study was to examine the prevalence of Internet addiction in a nationally representative sample of Chinese elementary and middle school students and to investigate Internet addiction among Internet users with different usages. The data were from the National Children's Study of China (NCSC) in which 24,013 fourth- to ninth-grade students were recruited from 100 counties in 31 provinces in China. Only 54.2% of the students had accessed the Internet. According to the criteria of Young's Diagnostic Questionnaire (YDQ), an eight-item instrument, the prevalence of Internet addiction in the total sample was 6.3%, and among Internet users was 11.7%. Among the Internet users, males (14.8%) and rural students (12.1%) reported Internet addiction more than females (7.0%) and urban students (10.6%). The percentage of Internet addicts in elementary school students (11.5%) was not significantly lower than the percentage of middle school students (11.9%). There was no statistically significant difference between the four geographical regions (9.6%, 11.5%, 12.3%, 11.1%) characterized by different levels of economy, health, education, and social environment. As the frequency of Internet use and time spent online per week increased, the percentage of Internet addicts increased. When considering the location and purpose of Internet use, the percentage of Internet addicts was highest in adolescents typically surfing in Internet cafes (18.1%) and playing Internet games (22.5%). PMID:23971432

  16. Socioeconomic Determinants of Bullying in the Workplace: A National Representative Sample in Japan

    Science.gov (United States)

    Tsutsumi, Akizumi; Shimazu, Akihito; Inoue, Akiomi; Odagiri, Yuko; Yoshikawa, Toru; Haratani, Takashi; Shimomitsu, Teruichi

    2015-01-01

    Bullying in the workplace is an increasingly recognized threat to employee health. We sought to test three hypotheses related to the determinants of workplace bullying: power distance at work; safety climate; and frustration related to perceived social inequality. A questionnaire survey was administered to a nationally representative community-based sample of 5,000 residents in Japan aged 20–60 years. The questionnaire included questions about employment, occupation, company size, education, household income, and subjective social status (SSS). We inquired about both the witnessing and personal experience of workplace bullying during the past 30 days. Among 2,384 respondents, data were analyzed from 1,546 workers. Multiple logistic regression analyses were used to examine the social determinants of workplace bullying. Six percent and 15 percent of the total sample reported experiencing or witnessing workplace bullying, respectively. After adjusting for gender and age, temporary employees (Odds Ratio [OR]: 2.45 [95% Confidence Interval (CI) = 1.03–5.85]), junior high school graduates (OR: 2.62 [95%CI: 1.01–6.79]), workers with lowest household income (OR: 4.13 [95%CI:1.58–10.8]), and workers in the lowest SSS stratum (OR: 4.21 [95%CI:1.66–10.7]) were at increased risk of experiencing workplace bullying. When all variables were entered simultaneously in the model, a significant inverse association was observed between higher SSS and experiencing bullying (p = 0.002). Similarly in terms of witnessing bullying; SSS was significantly inversely associated (p = 0.017) while temporary employees reported a significantly higher risk of witnessing bullying compared to permanent workers (OR: 2.25 [95%CI:1.04 to 4.87]). The significant association between SSS and experiencing/witnessing workplace bullying supports the frustration hypothesis. The power distance hypothesis was also partly supported by the finding that temporary employees experienced a higher prevalence

  17. A systematic random sampling scheme optimized to detect the proportion of rare synapses in the neuropil.

    Science.gov (United States)

    da Costa, Nuno Maçarico; Hepp, Klaus; Martin, Kevan A C

    2009-05-30

    Synapses can only be morphologically identified by electron microscopy and this is often a very labor-intensive and time-consuming task. When quantitative estimates are required for pathways that contribute a small proportion of synapses to the neuropil, the problems of accurate sampling are particularly severe and the total time required may become prohibitive. Here we present a sampling method devised to count the percentage of rarely occurring synapses in the neuropil using a large sample (approximately 1000 sampling sites), with the strong constraint of doing it in reasonable time. The strategy, which uses the unbiased physical disector technique, resembles that used in particle physics to detect rare events. We validated our method in the primary visual cortex of the cat, where we used biotinylated dextran amine to label thalamic afferents and measured the density of their synapses using the physical disector method. Our results show that we could obtain accurate counts of the labeled synapses, even when they represented only 0.2% of all the synapses in the neuropil.

  18. Assessing genetic polymorphisms using DNA extracted from cells present in saliva samples

    Directory of Open Access Journals (Sweden)

    Nemoda Zsofia

    2011-12-01

    Full Text Available Abstract Background Technical advances following the Human Genome Project revealed that high-quality and -quantity DNA may be obtained from whole saliva samples. However, usability of previously collected samples and the effects of environmental conditions on the samples during collection have not been assessed in detail. In five studies we document the effects of sample volume, handling and storage conditions, type of collection device, and oral sampling location, on quantity, quality, and genetic assessment of DNA extracted from cells present in saliva. Methods Saliva samples were collected from ten adults in each study. Saliva volumes from .10-1.0 ml, different saliva collection devices, sampling locations in the mouth, room temperature storage, and multiple freeze-thaw cycles were tested. One representative single nucleotide polymorphism (SNP in the catechol-0-methyltransferase gene (COMT rs4680 and one representative variable number of tandem repeats (VNTR in the serotonin transporter gene (5-HTTLPR: serotonin transporter linked polymorphic region were selected for genetic analyses. Results The smallest tested whole saliva volume of .10 ml yielded, on average, 1.43 ± .77 μg DNA and gave accurate genotype calls in both genetic analyses. The usage of collection devices reduced the amount of DNA extracted from the saliva filtrates compared to the whole saliva sample, as 54-92% of the DNA was retained on the device. An "adhered cell" extraction enabled recovery of this DNA and provided good quality and quantity DNA. The DNA from both the saliva filtrates and the adhered cell recovery provided accurate genotype calls. The effects of storage at room temperature (up to 5 days, repeated freeze-thaw cycles (up to 6 cycles, and oral sampling location on DNA extraction and on genetic analysis from saliva were negligible. Conclusions Whole saliva samples with volumes of at least .10 ml were sufficient to extract good quality and quantity DNA. Using

  19. Accurate determination of antenna directivity

    DEFF Research Database (Denmark)

    Dich, Mikael

    1997-01-01

    The derivation of a formula for accurate estimation of the total radiated power from a transmitting antenna for which the radiated power density is known in a finite number of points on the far-field sphere is presented. The main application of the formula is determination of directivity from power......-pattern measurements. The derivation is based on the theory of spherical wave expansion of electromagnetic fields, which also establishes a simple criterion for the required number of samples of the power density. An array antenna consisting of Hertzian dipoles is used to test the accuracy and rate of convergence...

  20. Attitudes toward Bisexual Men and Women among a Nationally Representative Probability Sample of Adults in the United States.

    Science.gov (United States)

    Dodge, Brian; Herbenick, Debby; Friedman, M Reuel; Schick, Vanessa; Fu, Tsung-Chieh Jane; Bostwick, Wendy; Bartelt, Elizabeth; Muñoz-Laboy, Miguel; Pletta, David; Reece, Michael; Sandfort, Theo G M

    2016-01-01

    As bisexual individuals in the United States (U.S.) face significant health disparities, researchers have posited that these differences may be fueled, at least in part, by negative attitudes, prejudice, stigma, and discrimination toward bisexual individuals from heterosexual and gay/lesbian individuals. Previous studies of individual and social attitudes toward bisexual men and women have been conducted almost exclusively with convenience samples, with limited generalizability to the broader U.S. Our study provides an assessment of attitudes toward bisexual men and women among a nationally representative probability sample of heterosexual, gay, lesbian, and other-identified adults in the U.S. Data were collected from the 2015 National Survey of Sexual Health and Behavior (NSSHB), via an online questionnaire with a probability sample of adults (18 years and over) from throughout the U.S. We included two modified 5-item versions of the Bisexualities: Indiana Attitudes Scale (BIAS), validated sub-scales that were developed to measure attitudes toward bisexual men and women. Data were analyzed using descriptive statistics, gamma regression, and paired t-tests. Gender, sexual identity, age, race/ethnicity, income, and educational attainment were all significantly associated with participants' attitudes toward bisexual individuals. In terms of responses to individual scale items, participants were most likely to "neither agree nor disagree" with all attitudinal statements. Across sexual identities, self-identified other participants reported the most positive attitudes, while heterosexual male participants reported the least positive attitudes. As in previous research on convenience samples, we found a wide range of demographic characteristics were related with attitudes toward bisexual individuals in our nationally-representative study of heterosexual, gay/lesbian, and other-identified adults in the U.S. In particular, gender emerged as a significant characteristic

  1. Diet- and Body Size-related Attitudes and Behaviors Associated with Vitamin Supplement Use in a Representative Sample of Fourth-grade Students in Texas

    Science.gov (United States)

    The objective of this research was to examine diet- and body size-related attitudes and behaviors associated with supplement use in a representative sample of fourth-grade students in Texas. The research design consisted of cross-sectional data from the School Physical Activity and Nutrition study, ...

  2. Ultra-processed food purchases in Norway: a quantitative study on a representative sample of food retailers.

    Science.gov (United States)

    Solberg, Siri Løvsjø; Terragni, Laura; Granheim, Sabrina Ionata

    2016-08-01

    To identify the use of ultra-processed foods - vectors of salt, sugar and fats - in the Norwegian diet through an assessment of food sales. Sales data from a representative sample of food retailers in Norway, collected in September 2005 (n 150) and September 2013 (n 170), were analysed. Data consisted of barcode scans of individual food item purchases, reporting type of food, price, geographical region and retail concept. Foods were categorized as minimally processed, culinary ingredients, processed products and ultra-processed. Indicators were share of purchases and share of expenditure on food categories. Six geographical regions in Norway. The barcode data included 296 121 observations in 2005 and 501 938 observations in 2013. Ultra-processed products represented 58·8 % of purchases and 48·8 % of expenditure in 2013. Minimally processed foods accounted for 17·2 % of purchases and 33·0 % of expenditure. Every third purchase was a sweet ultra-processed product. Food sales changed marginally in favour of minimally processed foods and in disfavour of processed products between 2005 and 2013 (χ 2 (3)=203 195, Pprocessed products accounted for the majority of food sales in Norway, indicating a high consumption of such products. This could be contributing to rising rates of overweight, obesity and non-communicable diseases in the country, as findings from other countries indicate. Policy measures should aim at decreasing consumption of ultra-processed products and facilitating access (including economic) to minimally processed foods.

  3. Culturally appropriate methodology in obtaining a representative sample of South Australian Aboriginal adults for a cross-sectional population health study: challenges and resolutions.

    Science.gov (United States)

    Marin, Tania; Taylor, Anne Winifred; Grande, Eleonora Dal; Avery, Jodie; Tucker, Graeme; Morey, Kim

    2015-05-19

    The considerably lower average life expectancy of Aboriginal and Torres Strait Islander Australians, compared with non-Aboriginal and non-Torres Strait Islander Australians, has been widely reported. Prevalence data for chronic disease and health risk factors are needed to provide evidence based estimates for Australian Aboriginal and Torres Strait Islanders population health planning. Representative surveys for these populations are difficult due to complex methodology. The focus of this paper is to describe in detail the methodological challenges and resolutions of a representative South Australian Aboriginal population-based health survey. Using a stratified multi-stage sampling methodology based on the Australian Bureau of Statistics 2006 Census with culturally appropriate and epidemiological rigorous methods, 11,428 randomly selected dwellings were approached from a total of 209 census collection districts. All persons eligible for the survey identified as Aboriginal and/or Torres Strait Islander and were selected from dwellings identified as having one or more Aboriginal person(s) living there at the time of the survey. Overall, the 399 interviews from an eligible sample of 691 SA Aboriginal adults yielded a response rate of 57.7%. These face-to-face interviews were conducted by ten interviewers retained from a total of 27 trained Aboriginal interviewers. Challenges were found in three main areas: identification and recruitment of participants; interviewer recruitment and retainment; and using appropriate engagement with communities. These challenges were resolved, or at least mainly overcome, by following local protocols with communities and their representatives, and reaching agreement on the process of research for Aboriginal people. Obtaining a representative sample of Aboriginal participants in a culturally appropriate way was methodologically challenging and required high levels of commitment and resources. Adhering to these principles has resulted in a

  4. Development of anatomically and dielectrically accurate breast phantoms for microwave imaging applications

    Science.gov (United States)

    O'Halloran, M.; Lohfeld, S.; Ruvio, G.; Browne, J.; Krewer, F.; Ribeiro, C. O.; Inacio Pita, V. C.; Conceicao, R. C.; Jones, E.; Glavin, M.

    2014-05-01

    Breast cancer is one of the most common cancers in women. In the United States alone, it accounts for 31% of new cancer cases, and is second only to lung cancer as the leading cause of deaths in American women. More than 184,000 new cases of breast cancer are diagnosed each year resulting in approximately 41,000 deaths. Early detection and intervention is one of the most significant factors in improving the survival rates and quality of life experienced by breast cancer sufferers, since this is the time when treatment is most effective. One of the most promising breast imaging modalities is microwave imaging. The physical basis of active microwave imaging is the dielectric contrast between normal and malignant breast tissue that exists at microwave frequencies. The dielectric contrast is mainly due to the increased water content present in the cancerous tissue. Microwave imaging is non-ionizing, does not require breast compression, is less invasive than X-ray mammography, and is potentially low cost. While several prototype microwave breast imaging systems are currently in various stages of development, the design and fabrication of anatomically and dielectrically representative breast phantoms to evaluate these systems is often problematic. While some existing phantoms are composed of dielectrically representative materials, they rarely accurately represent the shape and size of a typical breast. Conversely, several phantoms have been developed to accurately model the shape of the human breast, but have inappropriate dielectric properties. This study will brie y review existing phantoms before describing the development of a more accurate and practical breast phantom for the evaluation of microwave breast imaging systems.

  5. Validation of a 16-Item Short Form of the Czech Version of the Experiences in Close Relationships Revised Questionnaire in a Representative Sample

    Czech Academy of Sciences Publication Activity Database

    Kaščáková, N.; Husárová, D.; Hašto, J.; Kolarčik, P.; Poláčková Šolcová, Iva; Madarasová Gecková, A.; Tavel, P.

    2016-01-01

    Roč. 119, č. 3 (2016), s. 804-825 ISSN 0033-2941 Institutional support: RVO:68081740 Keywords : Short form of the ECR-R * Experiences in Close Relationships Revised Questionnaire * validation * attachment anxiety * attachment avoidance * attachment styles * representative sample Subject RIV: AN - Psychology Impact factor: 0.629, year: 2016

  6. Is parenting style a predictor of suicide attempts in a representative sample of adolescents?

    Science.gov (United States)

    Donath, Carolin; Graessel, Elmar; Baier, Dirk; Bleich, Stefan; Hillemacher, Thomas

    2014-04-26

    Suicidal ideation and suicide attempts are serious but not rare conditions in adolescents. However, there are several research and practical suicide-prevention initiatives that discuss the possibility of preventing serious self-harm. Profound knowledge about risk and protective factors is therefore necessary. The aim of this study is a) to clarify the role of parenting behavior and parenting styles in adolescents' suicide attempts and b) to identify other statistically significant and clinically relevant risk and protective factors for suicide attempts in a representative sample of German adolescents. In the years 2007/2008, a representative written survey of N = 44,610 students in the 9th grade of different school types in Germany was conducted. In this survey, the lifetime prevalence of suicide attempts was investigated as well as potential predictors including parenting behavior. A three-step statistical analysis was carried out: I) As basic model, the association between parenting and suicide attempts was explored via binary logistic regression controlled for age and sex. II) The predictive values of 13 additional potential risk/protective factors were analyzed with single binary logistic regression analyses for each predictor alone. Non-significant predictors were excluded in Step III. III) In a multivariate binary logistic regression analysis, all significant predictor variables from Step II and the parenting styles were included after testing for multicollinearity. Three parental variables showed a relevant association with suicide attempts in adolescents - (all protective): mother's warmth and father's warmth in childhood and mother's control in adolescence (Step I). In the full model (Step III), Authoritative parenting (protective: OR: .79) and Rejecting-Neglecting parenting (risk: OR: 1.63) were identified as significant predictors (p parental separation events. Parenting style does matter. While children of Authoritative parents profit, children of

  7. Internet Gaming Disorder Among Slovenian Primary Schoolchildren: Findings From a Nationally Representative Sample of Adolescents

    Science.gov (United States)

    Pontes, Halley M.; Macur, Mirna; Griffiths, Mark D.

    2016-01-01

    Background and aims Since the inclusion of Internet Gaming Disorder (IGD) in the latest (fifth) edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) as a tentative disorder, a few psychometric screening instruments have been developed to assess IGD, including the 9-item Internet Gaming Disorder Scale – Short-Form (IGDS9-SF) – a short, valid, and reliable instrument. Methods Due to the lack of research on IGD in Slovenia, this study aimed to examine the psychometric properties of the IGDS9-SF in addition to investigating the prevalence rates of IGD in a nationally representative sample of eighth graders from Slovenia (N = 1,071). Results The IGDS9-SF underwent rigorous psychometric scrutiny in terms of validity and reliability. Construct validation was investigated with confirmatory factor analysis to examine the factorial structure of the IGDS9-SF and a unidimensional structure appeared to fit the data well. Concurrent and criterion validation were also investigated by examining the association between IGD and relevant psychosocial and game-related measures, which warranted these forms of validity. In terms of reliability, the Slovenian version IGDS9-SF obtained excellent results regarding its internal consistency at different levels, and the test appears to be a valid and reliable instrument to assess IGD among Slovenian youth. Finally, the prevalence rates of IGD were found to be around 2.5% in the whole sample and 3.1% among gamers. Discussion and conclusion Taken together, these results illustrate the suitability of the IGDS9-SF and warrants further research on IGD in Slovenia. PMID:27363464

  8. An affordable proxy of representative national survey on radon concentration in dwellings: Design, organisation and preliminary evaluation of representativeness

    International Nuclear Information System (INIS)

    Antignani, Sara; Carelli, Vinicio; Cordedda, Carlo; Zonno, Fedele; Ampollini, Marco; Carpentieri, Carmela; Venoso, Gennaro; Bochicchio, Francesco

    2013-01-01

    Representative national surveys in dwellings are important to unbiasedly evaluate the exposure of the general population to radon. In Italy, a representative national survey was conducted from 1989 to 1996, which involved about 5600 dwellings in 232 towns. Later on, some Regions carried out more detailed surveys, but a new national survey in dwellings is necessary in order to obtain a more thorough estimate of radon concentration distribution over the Italian territory. The need to make this survey in an affordable way led to implement a new approach based on the collaboration between the Istituto Superiore di Sanità and a national company with workplaces and employees' homes throughout the country. The intent is to carry out a proxy of a population representative survey by measuring radon concentration in the homes of a random sample of the company employees. The realisation of this survey was affordable, thanks to the availability of corporate e-mail for each employee, intranet service, and company internal mail service. A dedicated web procedure and e-questionnaires allowed to automatically manage the contact with employees and to collect their data, which were both cost- and time-saving. Using this e-mail contact approach, 53% of contacted employees consented to participate in the survey. Radon concentration passive measuring devices were distributed to about 7000 dwellings, using about 14000 CR-39 detectors (two measured rooms per dwelling). In order to reduce costs, the devices were exposed for 12 months instead of two consecutive 6-month periods (as with the former national survey). A first checking of the actual representativeness of the sample was done by comparing characteristics of dwellings and occupants in the sample with corresponding data from the latest National Census. This was accomplished thanks to the fact that the questions in the survey questionnaire were tailored to the categories adopted for the Census questionnaire. A preliminary

  9. Accurate isotope ratio mass spectrometry. Some problems and possibilities

    International Nuclear Information System (INIS)

    Bievre, P. de

    1978-01-01

    The review includes reference to 190 papers, mainly published during the last 10 years. It covers the following: important factors in accurate isotope ratio measurements (precision and accuracy of isotope ratio measurements -exemplified by determinations of 235 U/ 238 U and of other elements including 239 Pu/ 240 Pu; isotope fractionation -exemplified by curves for Rb, U); applications (atomic weights); the Oklo natural nuclear reactor (discovered by UF 6 mass spectrometry at Pierrelatte); nuclear and other constants; isotope ratio measurements in nuclear geology and isotope cosmology - accurate age determination; isotope ratio measurements on very small samples - archaeometry; isotope dilution; miscellaneous applications; and future prospects. (U.K.)

  10. Marijuana withdrawal and aggression among a representative sample of U.S. marijuana users

    Science.gov (United States)

    Smith, Philip H.; Homish, Gregory G.; Leonard, Kenneth E.; Collins, R. Lorraine

    2013-01-01

    Background Previous laboratory-based research suggests that withdrawal from marijuana may cause increased aggression. It is unclear whether this finding extends beyond the laboratory setting to the general population of marijuana users. The purpose of this study was to test a cross-sectional association between marijuana withdrawal symptoms and aggression among a representative sample of U.S. adult marijuana users, and to test whether this association was moderated by previous history of aggression. Methods Data were analyzed from the National Epidemiologic Survey on Alcohol and Related Conditions. Wave Two data (2004–2005) were used for all variables except for history of aggression, which was assessed during the Wave One interview (2001–2002). Two outcomes were examined: self-report general aggression and relationship aggression. Odds ratios for aggression based on withdrawal symptoms and the interaction between withdrawal symptoms and history of aggression were calculated using logistic regression, adjusting for covariates and accounting for the complex survey design. Results Among marijuana users with a history of aggression, marijuana withdrawal was associated with approximately 60% higher odds of past year relationship aggression (p aggression among those without a history of aggression, and no association with general aggression regardless of history of aggression. Conclusions The findings from this study support the notion that laboratory-based increases in aggression due to marijuana withdrawal extend to the general population of marijuana users who have a previous history of aggression. PMID:23380439

  11. The development and validation of the Male Genital Self-Image Scale: results from a nationally representative probability sample of men in the United States.

    Science.gov (United States)

    Herbenick, Debby; Schick, Vanessa; Reece, Michael; Sanders, Stephanie A; Fortenberry, J Dennis

    2013-06-01

    Numerous factors may affect men's sexual experiences, including their health status, past trauma or abuse, medication use, relationships, mood, anxiety, and body image. Little research has assessed the influence of men's genital self-image on their sexual function or behaviors and none has done so in a nationally representative sample. The purpose of this study was to, in a nationally representative probability sample of men ages 18 to 60, assess the reliability and validity of the Male Genital Self-Image Scale (MGSIS), and to examine the relationship between scores on the MGSIS and men's scores on the International Index of Erectile Function (IIEF). The MGSIS was developed in two stages. Phase One involved a review of the literature and an analysis of cross-sectional survey data. Phase Two involved an administration of the scale items to a nationally representative sample of men in the United States ages 18 to 60. Measures include demographic items, the IIEF, and the MGSIS. Overall, most men felt positively about their genitals. However, 24.6% of men expressed some discomfort letting a healthcare provider examine their genitals and about 20% reported dissatisfaction with their genital size. The MGSIS was found to be reliable and valid, with the MGSIS-5 (consisting of five items) being the best fit to the data. The MGSIS was found to be a reliable and valid measure. In addition, men's scores on the MGSIS-5 were found to be positively related to men's scores on the IIEF. © 2013 International Society for Sexual Medicine.

  12. The influence of polycyclic aromatic hydrocarbons on lung function in a representative sample of the Canadian population.

    Science.gov (United States)

    Cakmak, Sabit; Hebbern, Chris; Cakmak, Jasmine D; Dales, Robert E

    2017-09-01

    We investigated the associations between exposure to polycyclic aromatic hydrocarbons (PAHs) and selected respiratory physiologic measures in cycles 2 and 3 of the Canadian Health Measures Survey, a nationally representative population sample. Using generalized linear mixed models, we tested the association between selected PAH metabolites and 1-second forced expiratory volume (FEV 1 ), forced vital capacity (FVC), and the ratio between the two (FEV 1 /FVC) in 3531 people from 6 to 79 years of age. An interquartile change in urinary PAH metabolite was associated with significant decrements in FEV 1 and FVC for eight PAHs, 2-hydroxynapthalene, 1-, and 2-hydroxyphenanthrene, 2-, 3-, and 9-hydroxyfluorene and 3- and 4-hydroxyphenanthrene. Exposure to PAH may negatively affect lung function in the Canadian population. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  13. Calculating ensemble averaged descriptions of protein rigidity without sampling.

    Science.gov (United States)

    González, Luis C; Wang, Hui; Livesay, Dennis R; Jacobs, Donald J

    2012-01-01

    Previous works have demonstrated that protein rigidity is related to thermodynamic stability, especially under conditions that favor formation of native structure. Mechanical network rigidity properties of a single conformation are efficiently calculated using the integer body-bar Pebble Game (PG) algorithm. However, thermodynamic properties require averaging over many samples from the ensemble of accessible conformations to accurately account for fluctuations in network topology. We have developed a mean field Virtual Pebble Game (VPG) that represents the ensemble of networks by a single effective network. That is, all possible number of distance constraints (or bars) that can form between a pair of rigid bodies is replaced by the average number. The resulting effective network is viewed as having weighted edges, where the weight of an edge quantifies its capacity to absorb degrees of freedom. The VPG is interpreted as a flow problem on this effective network, which eliminates the need to sample. Across a nonredundant dataset of 272 protein structures, we apply the VPG to proteins for the first time. Our results show numerically and visually that the rigidity characterizations of the VPG accurately reflect the ensemble averaged [Formula: see text] properties. This result positions the VPG as an efficient alternative to understand the mechanical role that chemical interactions play in maintaining protein stability.

  14. Extending the alias Monte Carlo sampling method to general distributions

    International Nuclear Information System (INIS)

    Edwards, A.L.; Rathkopf, J.A.; Smidt, R.K.

    1991-01-01

    The alias method is a Monte Carlo sampling technique that offers significant advantages over more traditional methods. It equals the accuracy of table lookup and the speed of equal probable bins. The original formulation of this method sampled from discrete distributions and was easily extended to histogram distributions. We have extended the method further to applications more germane to Monte Carlo particle transport codes: continuous distributions. This paper presents the alias method as originally derived and our extensions to simple continuous distributions represented by piecewise linear functions. We also present a method to interpolate accurately between distributions tabulated at points other than the point of interest. We present timing studies that demonstrate the method's increased efficiency over table lookup and show further speedup achieved through vectorization. 6 refs., 12 figs., 2 tabs

  15. Influence of Medical Representatives on Prescribing Practices in Mekelle, Northern Ethiopia.

    Directory of Open Access Journals (Sweden)

    Birhanu Demeke Workneh

    Full Text Available Drug promotion by medical representatives is one of the factors that influence physicians' prescribing decisions and choice of drugs.To assess the influence of medical representatives on prescribing practice of physicians in health facilities, Mekelle, Northern Ethiopia.Facility-based cross-sectional study was conducted enrolling all physicians working in public and private health facilities. All public and private health facilities were included and similarly, all physicians rendering services in these facilities were sampled in the study. The data were collected from February to March, 2015. Data were then entered into Epidata Version 3.1 and transferred to STATA version 12 for analysis. Both bivariable and multivariable logistic regressions were used to determine predictors.Of the ninety physicians approached in this study, 40 (48.2% of the physicians believed that their prescribing decisions were influenced by visits of medical representatives (MRs. The odds of physicians who received gifts from MRs being influenced to prescribe their respective products was six times higher than those who reported not accepting any gifts [AOR = 6.56, 95% CI: 2.25, 19.13]. Stationery materials 23(35.4% and drug samples 20(54.2% were the commonest kinds of gifts given to physicians and face to face talking 45(54.2% was the most frequent promotional methods. The finding of this study showed that around thirty-nine percent of MRs have had negative attitude toward competitors' product. Moreover, working in private health facility was also another predictor of influence of prescribing decision in the study area [AOR = 12.78, 95% CI: 1.31, 124.56].Nearly half of the physicians working in Mekelle reported that their prescribing decisions were influenced by MRs in the last 12 months. Accepting gifts and working in private health facilities were predictors of influencing prescribing decisions. However, most MRs fails to provide adequate and accurate information

  16. Attitudes toward Bisexual Men and Women among a Nationally Representative Probability Sample of Adults in the United States

    Science.gov (United States)

    Herbenick, Debby; Friedman, M. Reuel; Schick, Vanessa; Fu, Tsung-Chieh (Jane); Bostwick, Wendy; Bartelt, Elizabeth; Muñoz-Laboy, Miguel; Pletta, David; Reece, Michael; Sandfort, Theo G. M.

    2016-01-01

    As bisexual individuals in the United States (U.S.) face significant health disparities, researchers have posited that these differences may be fueled, at least in part, by negative attitudes, prejudice, stigma, and discrimination toward bisexual individuals from heterosexual and gay/lesbian individuals. Previous studies of individual and social attitudes toward bisexual men and women have been conducted almost exclusively with convenience samples, with limited generalizability to the broader U.S. population. Our study provides an assessment of attitudes toward bisexual men and women among a nationally representative probability sample of heterosexual, gay, lesbian, and other-identified adults in the U.S. Data were collected from the 2015 National Survey of Sexual Health and Behavior (NSSHB), via an online questionnaire with a probability sample of adults (18 years and over) from throughout the U.S. We included two modified 5-item versions of the Bisexualities: Indiana Attitudes Scale (BIAS), validated sub-scales that were developed to measure attitudes toward bisexual men and women. Data were analyzed using descriptive statistics, gamma regression, and paired t-tests. Gender, sexual identity, age, race/ethnicity, income, and educational attainment were all significantly associated with participants' attitudes toward bisexual individuals. In terms of responses to individual scale items, participants were most likely to “neither agree nor disagree” with all attitudinal statements. Across sexual identities, self-identified other participants reported the most positive attitudes, while heterosexual male participants reported the least positive attitudes. As in previous research on convenience samples, we found a wide range of demographic characteristics were related with attitudes toward bisexual individuals in our nationally-representative study of heterosexual, gay/lesbian, and other-identified adults in the U.S. In particular, gender emerged as a significant

  17. Convergent synthesis of a deuterium-labeled serine dipeptide lipid for analysis of biological samples.

    Science.gov (United States)

    Dietz, Christopher; Clark, Robert B; Nichols, Frank C; Smith, Michael B

    2017-05-30

    Bacterial serine dipeptide lipids are known to promote inflammatory processes and are detected in human tissues associated with periodontal disease or atherosclerosis. Accurate quantification of bacterial serine lipid, specifically lipid 654 [((S)-15-methyl-3-((13-methyltetradecanoyl)oxy)hexadecanoyl)glycyl-l-serine, (3S)-l-serine] isolated from Porphyromonas gingivalis, in biological samples requires the preparation of a stable isotope internal standard for sample supplementation and subsequent mass spectrometric analysis. This report describes the convergent synthesis of a deuterium-substituted serine dipeptide lipid, which is an isotopically labeled homologue that represents a dominant form of serine dipeptide lipid recovered in bacteria. Copyright © 2017 John Wiley & Sons, Ltd.

  18. Accurate Rapid Lifetime Determination on Time-Gated FLIM Microscopy with Optical Sectioning.

    Science.gov (United States)

    Silva, Susana F; Domingues, José Paulo; Morgado, António Miguel

    2018-01-01

    Time-gated fluorescence lifetime imaging microscopy (FLIM) is a powerful technique to assess the biochemistry of cells and tissues. When applied to living thick samples, it is hampered by the lack of optical sectioning and the need of acquiring many images for an accurate measurement of fluorescence lifetimes. Here, we report on the use of processing techniques to overcome these limitations, minimizing the acquisition time, while providing optical sectioning. We evaluated the application of the HiLo and the rapid lifetime determination (RLD) techniques for accurate measurement of fluorescence lifetimes with optical sectioning. HiLo provides optical sectioning by combining the high-frequency content from a standard image, obtained with uniform illumination, with the low-frequency content of a second image, acquired using structured illumination. Our results show that HiLo produces optical sectioning on thick samples without degrading the accuracy of the measured lifetimes. We also show that instrument response function (IRF) deconvolution can be applied with the RLD technique on HiLo images, improving greatly the accuracy of the measured lifetimes. These results open the possibility of using the RLD technique with pulsed diode laser sources to determine accurately fluorescence lifetimes in the subnanosecond range on thick multilayer samples, providing that offline processing is allowed.

  19. Accurate determination of Curium and Californium isotopic ratios by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS) in 248Cm samples for transmutation studies

    Energy Technology Data Exchange (ETDEWEB)

    Gourgiotis, A.; Isnard, H.; Aubert, M.; Dupont, E.; AlMahamid, I.; Cassette, P.; Panebianco, S.; Letourneau, A.; Chartier, F.; Tian, G.; Rao, L.; Lukens, W.

    2011-02-01

    The French Atomic Energy Commission has carried out several experiments including the mini-INCA (INcineration of Actinides) project for the study of minor-actinide transmutation processes in high intensity thermal neutron fluxes, in view of proposing solutions to reduce the radiotoxicity of long-lived nuclear wastes. In this context, a Cm sample enriched in {sup 248}Cm ({approx}97 %) was irradiated in thermal neutron flux at the High Flux Reactor (HFR) of the Laue-Langevin Institute (ILL). This work describes a quadrupole ICP-MS (ICP-QMS) analytical procedure for precise and accurate isotopic composition determination of Cm before sample irradiation and of Cm and Cf after sample irradiation. The factors that affect the accuracy and reproducibility of isotopic ratio measurements by ICP-QMS, such as peak centre correction, detector dead time, mass bias, abundance sensitivity and hydrides formation, instrumental background, and memory blank were carefully evaluated and corrected. Uncertainties of the isotopic ratios, taking into account internal precision of isotope ratio measurements, peak tailing, and hydrides formations ranged from 0.3% to 1.3%. This uncertainties range is quite acceptable for the nuclear data to be used in transmutation studies.

  20. Simple and accurate quantification of BTEX in ambient air by SPME and GC-MS.

    Science.gov (United States)

    Baimatova, Nassiba; Kenessov, Bulat; Koziel, Jacek A; Carlsen, Lars; Bektassov, Marat; Demyanenko, Olga P

    2016-07-01

    Benzene, toluene, ethylbenzene and xylenes (BTEX) comprise one of the most ubiquitous and hazardous groups of ambient air pollutants of concern. Application of standard analytical methods for quantification of BTEX is limited by the complexity of sampling and sample preparation equipment, and budget requirements. Methods based on SPME represent simpler alternative, but still require complex calibration procedures. The objective of this research was to develop a simpler, low-budget, and accurate method for quantification of BTEX in ambient air based on SPME and GC-MS. Standard 20-mL headspace vials were used for field air sampling and calibration. To avoid challenges with obtaining and working with 'zero' air, slope factors of external standard calibration were determined using standard addition and inherently polluted lab air. For polydimethylsiloxane (PDMS) fiber, differences between the slope factors of calibration plots obtained using lab and outdoor air were below 14%. PDMS fiber provided higher precision during calibration while the use of Carboxen/PDMS fiber resulted in lower detection limits for benzene and toluene. To provide sufficient accuracy, the use of 20mL vials requires triplicate sampling and analysis. The method was successfully applied for analysis of 108 ambient air samples from Almaty, Kazakhstan. Average concentrations of benzene, toluene, ethylbenzene and o-xylene were 53, 57, 11 and 14µgm(-3), respectively. The developed method can be modified for further quantification of a wider range of volatile organic compounds in air. In addition, the new method is amenable to automation. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Mental models accurately predict emotion transitions.

    Science.gov (United States)

    Thornton, Mark A; Tamir, Diana I

    2017-06-06

    Successful social interactions depend on people's ability to predict others' future actions and emotions. People possess many mechanisms for perceiving others' current emotional states, but how might they use this information to predict others' future states? We hypothesized that people might capitalize on an overlooked aspect of affective experience: current emotions predict future emotions. By attending to regularities in emotion transitions, perceivers might develop accurate mental models of others' emotional dynamics. People could then use these mental models of emotion transitions to predict others' future emotions from currently observable emotions. To test this hypothesis, studies 1-3 used data from three extant experience-sampling datasets to establish the actual rates of emotional transitions. We then collected three parallel datasets in which participants rated the transition likelihoods between the same set of emotions. Participants' ratings of emotion transitions predicted others' experienced transitional likelihoods with high accuracy. Study 4 demonstrated that four conceptual dimensions of mental state representation-valence, social impact, rationality, and human mind-inform participants' mental models. Study 5 used 2 million emotion reports on the Experience Project to replicate both of these findings: again people reported accurate models of emotion transitions, and these models were informed by the same four conceptual dimensions. Importantly, neither these conceptual dimensions nor holistic similarity could fully explain participants' accuracy, suggesting that their mental models contain accurate information about emotion dynamics above and beyond what might be predicted by static emotion knowledge alone.

  2. Mental models accurately predict emotion transitions

    Science.gov (United States)

    Thornton, Mark A.; Tamir, Diana I.

    2017-01-01

    Successful social interactions depend on people’s ability to predict others’ future actions and emotions. People possess many mechanisms for perceiving others’ current emotional states, but how might they use this information to predict others’ future states? We hypothesized that people might capitalize on an overlooked aspect of affective experience: current emotions predict future emotions. By attending to regularities in emotion transitions, perceivers might develop accurate mental models of others’ emotional dynamics. People could then use these mental models of emotion transitions to predict others’ future emotions from currently observable emotions. To test this hypothesis, studies 1–3 used data from three extant experience-sampling datasets to establish the actual rates of emotional transitions. We then collected three parallel datasets in which participants rated the transition likelihoods between the same set of emotions. Participants’ ratings of emotion transitions predicted others’ experienced transitional likelihoods with high accuracy. Study 4 demonstrated that four conceptual dimensions of mental state representation—valence, social impact, rationality, and human mind—inform participants’ mental models. Study 5 used 2 million emotion reports on the Experience Project to replicate both of these findings: again people reported accurate models of emotion transitions, and these models were informed by the same four conceptual dimensions. Importantly, neither these conceptual dimensions nor holistic similarity could fully explain participants’ accuracy, suggesting that their mental models contain accurate information about emotion dynamics above and beyond what might be predicted by static emotion knowledge alone. PMID:28533373

  3. Prevalence and Predictors of Bullying Behavior among Overweight and Obese Youth in a Nationally Representative Sample.

    Science.gov (United States)

    Odar Stough, Cathleen; Merianos, Ashley; Nabors, Laura; Peugh, James

    2016-08-01

    Child and adolescent overweight and obesity are independent risk factors for poor social outcomes. Whether children who are overweight display greater bullying behaviors than normal weight peers, controlling for demographic and other social-ecological factors, was examined. The influence of child (e.g., mental health), family (e.g., income, parent mental health, and exposure to domestic violence), and community (e.g., exposure to neighborhood violence, unfair treatment based on race or ethnic group) factors on bullying risk in the subset of children who are overweight and obese was explored. We conducted a secondary data analysis of the 2011-2012 National Survey of Children's Health, a cross-sectional study providing a nationally representative sample of participants, using a series of multinomial logistic regressions in Mplus software (Muthén & Muthén, Los Angeles, CA). Participants were 41,361 youth ages 10-17 years. Despite statistically significant differences in unadjusted analyses, no differences were found in bullying behavior by weight status once controlling for other factors. Child, family, and neighborhood factors predicted bullying behavior in both the overall sample and the subset of overweight and obese youth. However, some risk factors were unique to children who were overweight or obese. Children who are overweight or obese are not at greater risk for engaging in bullying behavior than normal weight peers. Health professionals targeting bullying behavior should be aware of the impact child, family, and neighborhood factors have on bullying by overweight and obese children and adolescents.

  4. Convenience Sampling of Children Presenting to Hospital-Based Outpatient Clinics to Estimate Childhood Obesity Levels in Local Surroundings.

    Science.gov (United States)

    Gilliland, Jason; Clark, Andrew F; Kobrzynski, Marta; Filler, Guido

    2015-07-01

    Childhood obesity is a critical public health matter associated with numerous pediatric comorbidities. Local-level data are required to monitor obesity and to help administer prevention efforts when and where they are most needed. We hypothesized that samples of children visiting hospital clinics could provide representative local population estimates of childhood obesity using data from 2007 to 2013. Such data might provide more accurate, timely, and cost-effective obesity estimates than national surveys. Results revealed that our hospital-based sample could not serve as a population surrogate. Further research is needed to confirm this finding.

  5. 21 CFR 111.80 - What representative samples must you collect?

    Science.gov (United States)

    2010-04-01

    ..., PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS Requirement to Establish a Production and... manufactured batch at points, steps, or stages, in the manufacturing process as specified in the master... statistical sampling plan (or otherwise every finished batch), before releasing for distribution to verify...

  6. Accurate determination of trace amounts of phosphorus in geological samples by inductively coupled plasma atomic emission spectrometry with ion-exchange separation

    International Nuclear Information System (INIS)

    Asoh, Kazuya; Ebihara, Mitsuru

    2013-01-01

    Graphical abstract: -- Highlights: •We set up an effective ICP-AES procedure for determining trace P in rock samples. •Some certified values of P for reference rock samples were proved to be doubtful. •Accurate and reliable data were presented for a suite of geological reference rocks. -- Abstract: In order to determine trace amounts of phosphorus in geological and cosmochemical rock samples, simple as well as reliable analytical schemes using an ICP-AES instrument were investigated. A (conventional) ICP-AES procedure could determine phosphorus contents at the level of several 100 μg g −1 with a reasonable reproducibility ( −1 ; 1σ). An ICP-AES procedure coupled with matrix-separation using cation and anion exchange resins could lower the quantification level down to 1 μg g −1 or even lower under the present experimental conditions. The matrix-separation ICP-AES procedure developed in this study was applied to twenty-one geological reference samples issued by Geological Survey of Japan. Obtained values vary from 1250 μg g −1 for JB-3 (basalt) to 2.07 μg g −1 for JCt-1 (carbonate). Matrix-separation ICP-AES yielded reasonable reproducibility (less than 8.3%; 1σ) of three replicate analyses for all the samples analyzed. In comparison of our data with certificate values as well as literature or reported values, there appear to be an apparent (and large) discrepancy between our values and certificate/reported values regardless of phosphorus contents. Based on the reproducibility of our data and the analytical capability of the matrix-separation ICP-AES procedure developed in this study (in terms of quantification limit, recovery, selectivity of an analyte through pre-concentration process, etc.), it is concluded that certified values for several reference standard rocks should be reevaluated and revised accordingly. It may be further pointed that some phosphorus data reported in literatures should be critically evaluated when they are to be

  7. Personality and attitudinal correlates of meat consumption: Results of two representative German samples.

    Science.gov (United States)

    Pfeiler, Tamara M; Egloff, Boris

    2018-02-01

    The vast amount of meat consumed in the Western world is critically discussed with regard to negative health consequences, environmental impact, and ethical concerns for animals, emphasizing the need to extend knowledge regarding the correlates of meat consumption in the general population. In the present article, we conducted two studies examining the associations between meat consumption and personality traits, political attitudes, and environmental attitudes in two large German representative samples (N total  = 8,879, aged 18-96 years). Cross-sectional data on frequency of meat consumption, socio-demographics, personality traits, and political and environmental attitudes were collected via self-reports. In both studies, male sex, younger age, and lower educational attainment were significantly positively related to meat consumption. In Study 1, results of the partial correlations and the hierarchical regression analysis controlling for socio-demographics showed that the personality traits of openness and agreeableness, as well as conservative political and social views, explained unique variance in meat consumption. In Study 2, partial correlations and hierarchical regression analyses showed that openness, agreeableness, and conscientiousness were all uniquely negatively related to meat consumption. Moreover, these analyses documented that people scoring high in right-wing attitudes and low in pro-environmental attitudes reported more overall meat consumption. Taken together, these two studies provided evidence that socio-demographics, personality traits, and attitudes are indeed related to how much meat is consumed. Implications and future prospects for the study of individual differences in meat consumption are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Parenting style and mental disorders in a nationally representative sample of US adolescents.

    Science.gov (United States)

    Eun, John David; Paksarian, Diana; He, Jian-Ping; Merikangas, Kathleen Ries

    2018-01-01

    We examined associations between parenting style and past-year mental disorders in a nationally representative cross-sectional survey of US adolescents and whether the associations differed by adolescent demographic characteristics. The sample included 6483 adolescents aged 13-18 years who were interviewed for a full range of DSM-IV mental disorders. Parenting style was assessed by adolescent-reported maternal and paternal care and control using items from the Parental Bonding Instrument. We controlled for socio-demographics, parental history of mental disorders, stressful life events, sexual violence, inter-parental conflict, and household composition. We also tested for two-way interactions between parental care and control and adolescent age, sex, and race/ethnicity. In adjusted models, high maternal care was associated with lower odds of depressive, eating, and behavioral disorders, and high maternal control was associated with greater odds of depressive, anxiety, eating, and behavioral disorders. High paternal care was associated with lower odds of social phobia and alcohol abuse/dependence. High paternal control was associated with greater odds of agoraphobia and alcohol abuse/dependence but with lower odds of attention-deficit/hyperactivity disorder. Associations of maternal and paternal control with anxiety disorders and substance abuse/dependence differed by sex. High paternal care was associated with lower odds of anxiety disorders only among Hispanics and non-Hispanic blacks. Perceived parental care and control were associated with adolescent mental disorders after controlling for multiple potential confounders. Differential patterns of association were found according to adolescent sex and race/ethnicity. Findings have implications for prevention and intervention programs that incorporate familial contextual factors.

  9. Is parenting style a predictor of suicide attempts in a representative sample of adolescents?

    Science.gov (United States)

    2014-01-01

    Background Suicidal ideation and suicide attempts are serious but not rare conditions in adolescents. However, there are several research and practical suicide-prevention initiatives that discuss the possibility of preventing serious self-harm. Profound knowledge about risk and protective factors is therefore necessary. The aim of this study is a) to clarify the role of parenting behavior and parenting styles in adolescents’ suicide attempts and b) to identify other statistically significant and clinically relevant risk and protective factors for suicide attempts in a representative sample of German adolescents. Methods In the years 2007/2008, a representative written survey of N = 44,610 students in the 9th grade of different school types in Germany was conducted. In this survey, the lifetime prevalence of suicide attempts was investigated as well as potential predictors including parenting behavior. A three-step statistical analysis was carried out: I) As basic model, the association between parenting and suicide attempts was explored via binary logistic regression controlled for age and sex. II) The predictive values of 13 additional potential risk/protective factors were analyzed with single binary logistic regression analyses for each predictor alone. Non-significant predictors were excluded in Step III. III) In a multivariate binary logistic regression analysis, all significant predictor variables from Step II and the parenting styles were included after testing for multicollinearity. Results Three parental variables showed a relevant association with suicide attempts in adolescents – (all protective): mother’s warmth and father’s warmth in childhood and mother’s control in adolescence (Step I). In the full model (Step III), Authoritative parenting (protective: OR: .79) and Rejecting-Neglecting parenting (risk: OR: 1.63) were identified as significant predictors (p < .001) for suicidal attempts. Seven further variables were interpreted to be

  10. Learning in later life: participation in formal, non-formal and informal activities in a nationally representative Spanish sample.

    Science.gov (United States)

    Villar, Feliciano; Celdrán, Montserrat

    2013-06-01

    This article examines the participation of Spanish older people in formal, non-formal and informal learning activities and presents a profile of participants in each kind of learning activity. We used data from a nationally representative sample of Spanish people between 60 and 75 years old ( n  = 4,703). The data were extracted from the 2007 Encuesta sobre la Participación de la Población Adulta en Actividades de Aprendizaje (EADA, Survey on Adult Population Involvement in Learning Activities). Overall, only 22.8 % of the sample participated in a learning activity. However, there was wide variation in the participation rates for the different types of activity. Informal activities were far more common than formal ones. Multivariate logistic regression indicated that education level and involvement in social and cultural activities were associated with likelihood of participating, regardless of the type of learning activity. When these variables were taken into account, age did not predict decreasing participation, at least in non-formal and informal activities. Implications for further research, future trends and policies to promote older adult education are discussed.

  11. Seeing and Being Seen: Predictors of Accurate Perceptions about Classmates’ Relationships

    Science.gov (United States)

    Neal, Jennifer Watling; Neal, Zachary P.; Cappella, Elise

    2015-01-01

    This study examines predictors of observer accuracy (i.e. seeing) and target accuracy (i.e. being seen) in perceptions of classmates’ relationships in a predominantly African American sample of 420 second through fourth graders (ages 7 – 11). Girls, children in higher grades, and children in smaller classrooms were more accurate observers. Targets (i.e. pairs of children) were more accurately observed when they occurred in smaller classrooms of higher grades and involved same-sex, high-popularity, and similar-popularity children. Moreover, relationships between pairs of girls were more accurately observed than relationships between pairs of boys. As a set, these findings suggest the importance of both observer and target characteristics for children’s accurate perceptions of classroom relationships. Moreover, the substantial variation in observer accuracy and target accuracy has methodological implications for both peer-reported assessments of classroom relationships and the use of stochastic actor-based models to understand peer selection and socialization processes. PMID:26347582

  12. Organizational factors associated with work-related sleep problems in a nationally representative sample of Korean workers.

    Science.gov (United States)

    Park, Jae Bum; Nakata, Akinori; Swanson, Naomi G; Chun, Heekyoung

    2013-02-01

    The purpose of this study was to assess the association of organizational factors with work-related sleep problems (WRSP) among Korean workers. The data were derived from the First Korean Working Conditions Survey conducted in 2006 with a representative sample of the Korean working population (n = 10,039). The overall prevalence of WRSP was 5.1% (95% confidence interval (CI) 4.7-5.5). Those who experienced sexual harassment at work (adjusted odds ratio (aOR) 3.47: 95% CI 1.77-6.81), discrimination due to sex (aOR 2.44: 95% CI 1.36-4.36) or age (aOR 2.22: 95% CI 1.52-3.23), violence at work (aOR 1.98: 95% CI 1.06-3.68), threat of violence (aOR 1.96: 95% CI 1.05-3.66), poor work-life balance (aOR 1.78: 95% CI 1.44-2.20), low job satisfaction (aOR 1.69: 95% CI 1.37-2.09), high cognitive (OR 1.64: 95% CI 1.32-2.03) and emotional (aOR 1.53: 95% CI 1.22-1.91) demands, job insecurity (aOR 1.32: 95% CI 1.07-1.63), and high work intensity (aOR 1.55: 95% CI: 95% CI 1.25-1.92) had an increased risk of WRSP compared to their respective counterparts (p social support was not significantly associated with WRSP (aOR 0.88: 95% CI 0.67-1.15). The results revealed that poor psychosocial working conditions may be related to a high prevalence of WRSP among representative Korean workers.

  13. Determinants of Childhood Obesity in Representative Sample of Children in North East of Iran

    Directory of Open Access Journals (Sweden)

    Fereshteh Baygi

    2012-01-01

    Full Text Available Childhood obesity has become, a global public health problem, and epidemiological studies are important to identify its determinants in different populations. This study aimed to investigate factors associated with obesity in a representative sample of children in Neishabour, Iran. This study was conducted among 1500 randomly selected 6–12-year-old students from urban areas of Neishabour, northeast of Iran. Then, through a case-control study, 114 obese (BMI≥95th percentile of Iranian reference children were selected as the case group and were compared with 102 controls (15th≤BMI<85th percentile. Factors suggested to be associated with weight status were investigated, for example, parental obesity, child physical activity levels, socio-economic status (SES, and so forth. The analysis was conducted using univariate and multivariate logistic regression (MLR in SPSS version 16. In univariate logistic regression model, birth weight, birth order, family extension, TV watching, sleep duration, physical activity, parents’ job, parents’ education, parental obesity history, and SES were significantly associated with children’s obesity. After MLR analysis, physical activity and parental obesity history remained statistically significant in the model. Our findings showed that physical activity and parental obesity history are the most important determinants for childhood obesity in our population. This finding should be considered in implementation of preventive interventions.

  14. Predictors of utilisation of dental care services in a nationally representative sample of adults.

    Science.gov (United States)

    Guiney, H; Woods, N; Whelton, H; Morgan, K

    2011-12-01

    The objective of this study was to identify the predictors of utilisation of dental care services in Ireland. The 2007 Irish Survey of Lifestyle, Attitudes and Nutrition is a cross-sectional study, conducted in 2006/2007 (n = 10,364), by interviews at home to a representative sample of adults aged 18 years or over. Multivariate logistic regression was used to investigate the influence of socioeconomic, predisposing and enabling factors on the odds of males and females having a dental visit in the past year. The significant predictors of visiting the dentist in the past year were for males: having 3rd level education, employment status, earning 50,000 euros or more, location of residence, use of a car, brushing frequently, and dentition status. For females, the predictors were being between 25-34 or 55-64 years-old, education level, earning 50,000 euros or more, location of residence, use of a car, brushing frequently and dentition status. Predictors of the use of dental services vary by gender. Predictors common to both genders were education level, higher income, location of residence, use of a car, brushing frequently and dentition status. Many of the predictors of dental visiting in the past year are also related to social inequalities in health. These predictors may be useful markers of impact for policies designed to address inequalities in access to oral health services.

  15. An Optimal Strategy for Accurate Bulge-to-disk Decomposition of Disk Galaxies

    Energy Technology Data Exchange (ETDEWEB)

    Gao Hua [Department of Astronomy, School of Physics, Peking University, Beijing 100871 (China); Ho, Luis C. [Kavli Institute for Astronomy and Astrophysics, Peking University, Beijing 100871 (China)

    2017-08-20

    The development of two-dimensional (2D) bulge-to-disk decomposition techniques has shown their advantages over traditional one-dimensional (1D) techniques, especially for galaxies with non-axisymmetric features. However, the full potential of 2D techniques has yet to be fully exploited. Secondary morphological features in nearby disk galaxies, such as bars, lenses, rings, disk breaks, and spiral arms, are seldom accounted for in 2D image decompositions, even though some image-fitting codes, such as GALFIT, are capable of handling them. We present detailed, 2D multi-model and multi-component decomposition of high-quality R -band images of a representative sample of nearby disk galaxies selected from the Carnegie-Irvine Galaxy Survey, using the latest version of GALFIT. The sample consists of five barred and five unbarred galaxies, spanning Hubble types from S0 to Sc. Traditional 1D decomposition is also presented for comparison. In detailed case studies of the 10 galaxies, we successfully model the secondary morphological features. Through a comparison of best-fit parameters obtained from different input surface brightness models, we identify morphological features that significantly impact bulge measurements. We show that nuclear and inner lenses/rings and disk breaks must be properly taken into account to obtain accurate bulge parameters, whereas outer lenses/rings and spiral arms have a negligible effect. We provide an optimal strategy to measure bulge parameters of typical disk galaxies, as well as prescriptions to estimate realistic uncertainties of them, which will benefit subsequent decomposition of a larger galaxy sample.

  16. An Optimal Strategy for Accurate Bulge-to-disk Decomposition of Disk Galaxies

    Science.gov (United States)

    Gao, Hua; Ho, Luis C.

    2017-08-01

    The development of two-dimensional (2D) bulge-to-disk decomposition techniques has shown their advantages over traditional one-dimensional (1D) techniques, especially for galaxies with non-axisymmetric features. However, the full potential of 2D techniques has yet to be fully exploited. Secondary morphological features in nearby disk galaxies, such as bars, lenses, rings, disk breaks, and spiral arms, are seldom accounted for in 2D image decompositions, even though some image-fitting codes, such as GALFIT, are capable of handling them. We present detailed, 2D multi-model and multi-component decomposition of high-quality R-band images of a representative sample of nearby disk galaxies selected from the Carnegie-Irvine Galaxy Survey, using the latest version of GALFIT. The sample consists of five barred and five unbarred galaxies, spanning Hubble types from S0 to Sc. Traditional 1D decomposition is also presented for comparison. In detailed case studies of the 10 galaxies, we successfully model the secondary morphological features. Through a comparison of best-fit parameters obtained from different input surface brightness models, we identify morphological features that significantly impact bulge measurements. We show that nuclear and inner lenses/rings and disk breaks must be properly taken into account to obtain accurate bulge parameters, whereas outer lenses/rings and spiral arms have a negligible effect. We provide an optimal strategy to measure bulge parameters of typical disk galaxies, as well as prescriptions to estimate realistic uncertainties of them, which will benefit subsequent decomposition of a larger galaxy sample.

  17. An Optimal Strategy for Accurate Bulge-to-disk Decomposition of Disk Galaxies

    International Nuclear Information System (INIS)

    Gao Hua; Ho, Luis C.

    2017-01-01

    The development of two-dimensional (2D) bulge-to-disk decomposition techniques has shown their advantages over traditional one-dimensional (1D) techniques, especially for galaxies with non-axisymmetric features. However, the full potential of 2D techniques has yet to be fully exploited. Secondary morphological features in nearby disk galaxies, such as bars, lenses, rings, disk breaks, and spiral arms, are seldom accounted for in 2D image decompositions, even though some image-fitting codes, such as GALFIT, are capable of handling them. We present detailed, 2D multi-model and multi-component decomposition of high-quality R -band images of a representative sample of nearby disk galaxies selected from the Carnegie-Irvine Galaxy Survey, using the latest version of GALFIT. The sample consists of five barred and five unbarred galaxies, spanning Hubble types from S0 to Sc. Traditional 1D decomposition is also presented for comparison. In detailed case studies of the 10 galaxies, we successfully model the secondary morphological features. Through a comparison of best-fit parameters obtained from different input surface brightness models, we identify morphological features that significantly impact bulge measurements. We show that nuclear and inner lenses/rings and disk breaks must be properly taken into account to obtain accurate bulge parameters, whereas outer lenses/rings and spiral arms have a negligible effect. We provide an optimal strategy to measure bulge parameters of typical disk galaxies, as well as prescriptions to estimate realistic uncertainties of them, which will benefit subsequent decomposition of a larger galaxy sample.

  18. Representative sampling of animal feed and mixtures in the Danish agricultural sector

    DEFF Research Database (Denmark)

    Petersen, Lars; Esbensen, Kim Harry

    2005-01-01

    Sampling of grain, animal feeds (solid & liquid) including important mineral mixtures in the Danish agricultural sector is subject to an ongoing investigation with the objective of improving existing (sub-optimal) sampling procedures. Results from the first 6 months are presented here; the projec...

  19. Exploring the relationship between sequence similarity and accurate phylogenetic trees.

    Science.gov (United States)

    Cantarel, Brandi L; Morrison, Hilary G; Pearson, William

    2006-11-01

    We have characterized the relationship between accurate phylogenetic reconstruction and sequence similarity, testing whether high levels of sequence similarity can consistently produce accurate evolutionary trees. We generated protein families with known phylogenies using a modified version of the PAML/EVOLVER program that produces insertions and deletions as well as substitutions. Protein families were evolved over a range of 100-400 point accepted mutations; at these distances 63% of the families shared significant sequence similarity. Protein families were evolved using balanced and unbalanced trees, with ancient or recent radiations. In families sharing statistically significant similarity, about 60% of multiple sequence alignments were 95% identical to true alignments. To compare recovered topologies with true topologies, we used a score that reflects the fraction of clades that were correctly clustered. As expected, the accuracy of the phylogenies was greatest in the least divergent families. About 88% of phylogenies clustered over 80% of clades in families that shared significant sequence similarity, using Bayesian, parsimony, distance, and maximum likelihood methods. However, for protein families with short ancient branches (ancient radiation), only 30% of the most divergent (but statistically significant) families produced accurate phylogenies, and only about 70% of the second most highly conserved families, with median expectation values better than 10(-60), produced accurate trees. These values represent upper bounds on expected tree accuracy for sequences with a simple divergence history; proteins from 700 Giardia families, with a similar range of sequence similarities but considerably more gaps, produced much less accurate trees. For our simulated insertions and deletions, correct multiple sequence alignments did not perform much better than those produced by T-COFFEE, and including sequences with expressed sequence tag-like sequencing errors did not

  20. Application of dynamic pseudo fission products and actinides for accurate burnup calculations

    Energy Technology Data Exchange (ETDEWEB)

    Hoogenboom, J.E.; Leege, P.F.A. de [Technische Univ. Delft (Netherlands). Interfacultair Reactor Inst.; Kloosterman, J.L.

    1996-09-01

    The introduction of pseudo fission products for accurate fine-group spectrum calculations during burnup is discussed. The calculation of the density of the pseudo nuclides is done before each spectrum calculation from the actual densities and their cross sections of all nuclides to be lumped into a pseudo fission product. As there are also many actinides formed in the fuel during its life cycle, a pseudo actinide with fission cross section is also introduced. From a realistic burnup calculation it is demonstrated that only a few fission products and actinides need to be included explicitly in a spectrum calculation. All other fission products and actinides can be accurately represented in the pseudo nuclides. (author)

  1. Accurate and fast methods to estimate the population mutation rate from error prone sequences

    Directory of Open Access Journals (Sweden)

    Miyamoto Michael M

    2009-08-01

    Full Text Available Abstract Background The population mutation rate (θ remains one of the most fundamental parameters in genetics, ecology, and evolutionary biology. However, its accurate estimation can be seriously compromised when working with error prone data such as expressed sequence tags, low coverage draft sequences, and other such unfinished products. This study is premised on the simple idea that a random sequence error due to a chance accident during data collection or recording will be distributed within a population dataset as a singleton (i.e., as a polymorphic site where one sampled sequence exhibits a unique base relative to the common nucleotide of the others. Thus, one can avoid these random errors by ignoring the singletons within a dataset. Results This strategy is implemented under an infinite sites model that focuses on only the internal branches of the sample genealogy where a shared polymorphism can arise (i.e., a variable site where each alternative base is represented by at least two sequences. This approach is first used to derive independently the same new Watterson and Tajima estimators of θ, as recently reported by Achaz 1 for error prone sequences. It is then used to modify the recent, full, maximum-likelihood model of Knudsen and Miyamoto 2, which incorporates various factors for experimental error and design with those for coalescence and mutation. These new methods are all accurate and fast according to evolutionary simulations and analyses of a real complex population dataset for the California seahare. Conclusion In light of these results, we recommend the use of these three new methods for the determination of θ from error prone sequences. In particular, we advocate the new maximum likelihood model as a starting point for the further development of more complex coalescent/mutation models that also account for experimental error and design.

  2. Health correlates of insomnia symptoms and comorbid mental disorders in a nationally representative sample of US adolescents.

    Science.gov (United States)

    Blank, Madeleine; Zhang, Jihui; Lamers, Femke; Taylor, Adrienne D; Hickie, Ian B; Merikangas, Kathleen R

    2015-01-01

    To estimate the prevalence and health correlates of insomnia symptoms and their association with comorbid mental disorders in a nationally representative sample of adolescents in the United States. National representative cross-sectional study. Population-based sample from the US adolescents. A total of 6,483 individuals aged between 13–18 y in the National Comorbidity Survey-Adolescent Supplement (NCS-A) with both individual and parental reports of mental health were included in this study. Participants were classified with insomnia symptoms if they reported difficulty initiating sleep, difficulty maintaining sleep, and/or early morning awakening, nearly every day for at least 2 w in the past year. Nearly one-third of adolescents reported insomnia symptoms for at least 2 w during the previous year. Hispanic and black youth were significantly more likely to report insomnia symptoms (42.0% and 41.3%, respectively) than non-Hispanic white youth (30.4%). Adolescents with insomnia symptoms were at a higher risk for all classes of mental disorders {odds ratio [OR] (95% confidence interval [CI]: 3.4 (2.9–4.0)} including mood, anxiety, behavioral, substance use, and eating disorders, suicidality [OR (95% CI): 2.63 (1.34–5.16)], poor perceived mental health [OR (95% CI): 2.01 (1.02–3.96)], chronic medical conditions [OR (95% CI): 1.94 (1.55–2.43)], smoking [OR (95% CI: 2.60 (1.00–6.72)], and obesity [OR (95% CI: 1.46 (1.10–1.93)] than those without insomnia symptoms. Adolescents with insomnia symptoms and comorbid mental disorders manifested even greater rates of these indicators of negative health behaviors and disorders than those with mental disorders alone (P Insomnia symptoms are reported by one-third of adolescents in the general population. Insomnia symptoms, even in the absence of concomitant depression or other mental disorders, are associated with serious health conditions, risk factors, and suicidality. Comorbid mental disorders potentiate the

  3. Prevalence of childhood sexual abuse and timing of disclosure in a representative sample of adults from Quebec.

    Science.gov (United States)

    Hébert, Martine; Tourigny, Marc; Cyr, Mireille; McDuff, Pierre; Joly, Jacques

    2009-09-01

    Our study sought to explore patterns of disclosure of child sexual abuse (CSA) in a sample of adult men and women. A telephone survey conducted with a representative sample of adults (n = 804) from Quebec assessed the prevalence of CSA and disclosure patterns. Analyses were carried out to determine whether disclosure groups differed in terms of psychological distress and symptoms of posttraumatic stress, and a logistic regression was used to examine factors associated with prompt disclosure. Prevalence of CSA was 22.1% for women and 9.7% for men. About 1 survivor out of 5 had never disclosed the abuse, with men more likely not to have told anyone, than women. Only 21.2% of adults reported prompt disclosure (within a month of the first abusive event), while 57.5% delayed disclosure (more than 5 years after the first episode). CSA victims who never disclosed the abuse and those who delayed disclosure were more likely to obtain scores of psychological distress and posttraumatic stress achieving clinical levels, compared with adults without a history of CSA. In the multivariate analysis, experiencing CSA involving a perpetrator outside the immediate family and being female were factors independently associated with prompt disclosure. A significant number of adult women and men reported experiencing CSA, and most victims attested to either not disclosing or significantly delaying abuse disclosure.

  4. Application of morphological and physiological parameters representative of a Brazilian population sample in the respiratory tract model

    International Nuclear Information System (INIS)

    Dos Reis, A. A.; Cardoso, J. C. S.; Lourenco, M. C.

    2007-01-01

    The human respiratory tract model (HRTM) adopted by ICRP in its Publication 66 accounts for the morphology and physiology of the respiratory tract. The characteristics of air drawn into the lungs and exhaled are greatly influenced by the morphology of the respiratory tract, which causes numerous changes in pressure, flow rate, direction and humidity as air moves into and out of the lungs. These characteristics are important to determine the fractional deposition. It is known that the morphology and physiology are influenced by environmental, occupational and economic conditions. The ICRP recommends, for a reliable evaluation of the regional deposition, the use of parameters from a local population wherever such information is available. The main purpose of this study is to verify the influence of using the morphology and physiology parameters representative of a sample of the Brazilian population on the deposition model of the ICRP Publication 66 model. (authors)

  5. Development of a Novel Reference Plasmid for Accurate Quantification of Genetically Modified Kefeng6 Rice DNA in Food and Feed Samples

    Directory of Open Access Journals (Sweden)

    Liang Li

    2013-01-01

    Full Text Available Reference plasmids are an essential tool for the quantification of genetically modified (GM events. Quantitative real-time PCR (qPCR is the most commonly used method to characterize and quantify reference plasmids. However, the precision of this method is often limited by calibration curves, and qPCR data can be affected by matrix differences between the standards and samples. Here, we describe a digital PCR (dPCR approach that can be used to accurately measure the novel reference plasmid pKefeng6 and quantify the unauthorized variety of GM rice Kefeng6, eliminating the issues associated with matrix effects in calibration curves. The pKefeng6 plasmid was used as a calibrant for the quantification of Kefeng6 rice by determining the copy numbers of event- (77 bp and taxon-specific (68 bp fragments, their ratios, and their concentrations. The plasmid was diluted to five different concentrations. The third sample (S3 was optimized for the quantification range of dPCR according to previous reports. The ratio between the two fragments was 1.005, which closely approximated the value certified by sequencing, and the concentration was found to be 792 copies/μL. This method was precise, with an RSD of ~3%. These findings demonstrate the advantages of using the dPCR method to characterize reference materials.

  6. Online Recruitment: Feasibility, Cost, and Representativeness in a Study of Postpartum Women.

    Science.gov (United States)

    Leach, Liana S; Butterworth, Peter; Poyser, Carmel; Batterham, Philip J; Farrer, Louise M

    2017-03-08

    Online recruitment is feasible, low-cost, and can provide high-quality epidemiological data. However, little is known about the feasibility of recruiting postpartum women online, or sample representativeness. The current study investigates the feasibility of recruiting a population of postpartum women online for health research and examines sample representativeness. Two samples of postpartum women were compared: those recruited online as participants in a brief survey of new mothers (n=1083) and those recruited face-to-face as part of a nationally representative study (n=579). Sociodemographic, general health, and mental health characteristics were compared between the two samples. Obtaining a sample of postpartum women online for health research was highly efficient and low-cost. The online sample over-represented those who were younger (aged 25-29 years), were in a de facto relationship, had higher levels of education, spoke only English at home, and were first-time mothers. Members of the online sample were significantly more likely to have poor self-rated health and poor mental health than the nationally representative sample. Health differences remained after adjusting for sociodemographic differences. Potential exists for feasible and low-cost e-epidemiological research with postpartum populations; however, researchers should consider the potential influence of sample nonrepresentativeness. ©Liana S Leach, Peter Butterworth, Carmel Poyser, Philip J Batterham, Louise M Farrer. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 08.03.2017.

  7. Choosing a suitable sample size in descriptive sampling

    International Nuclear Information System (INIS)

    Lee, Yong Kyun; Choi, Dong Hoon; Cha, Kyung Joon

    2010-01-01

    Descriptive sampling (DS) is an alternative to crude Monte Carlo sampling (CMCS) in finding solutions to structural reliability problems. It is known to be an effective sampling method in approximating the distribution of a random variable because it uses the deterministic selection of sample values and their random permutation,. However, because this method is difficult to apply to complex simulations, the sample size is occasionally determined without thorough consideration. Input sample variability may cause the sample size to change between runs, leading to poor simulation results. This paper proposes a numerical method for choosing a suitable sample size for use in DS. Using this method, one can estimate a more accurate probability of failure in a reliability problem while running a minimal number of simulations. The method is then applied to several examples and compared with CMCS and conventional DS to validate its usefulness and efficiency

  8. Prevalence of Hearing Loss Among a Representative Sample of Canadian Children and Adolescents, 3 to 19 Years of Age.

    Science.gov (United States)

    Feder, Katya Polena; Michaud, David; McNamee, James; Fitzpatrick, Elizabeth; Ramage-Morin, Pamela; Beauregard, Yves

    There are no nationally representative hearing loss (HL) prevalence data available for Canadian youth using direct measurements. The present study objectives were to estimate national prevalence of HL using audiometric pure-tone thresholds (0.5 to 8 kHz) and or distortion product otoacoustic emissions (DPOAEs) for children and adolescents, aged 3 to 19 years. This cross-sectional population-based study presents findings from the 2012/2013 Canadian Health Measures Survey, entailing an in-person household interview and hearing measurements conducted in a mobile examination clinic. The initial study sample included 2591 participants, aged 3 to 19 years, representing 6.5 million Canadians (3.3 million males). After exclusions, subsamples consisted of 2434 participants, aged 3 to 19 years and 1879 participants, aged 6 to 19 years, with valid audiometric results. Eligible participants underwent otoscopic examination, tympanometry, DPOAE, and audiometry. HL was defined as a pure-tone average >20 dB for 6- to 18-year olds and ≥26 dB for 19-year olds, for one or more of the following: four-frequency (0.5, 1, 2, and 4 kHz) pure-tone average, high-frequency (3, 4, 6, and 8 kHz) pure-tone average, and low-frequency (0.5, 1, and 2 kHz) pure-tone average. Mild HL was defined as >20 to 40 dB (6- to 18-year olds) and ≥26 to 40 dB (19-year olds). Moderate or worse HL was defined as >40 dB (6- to 19-year olds). HL in 3- to 5-year olds (n = 555) was defined as absent DPOAEs as audiometry was not conducted. Self-reported HL was evaluated using the Health Utilities Index Mark 3 hearing questions. The primary study outcome indicates that 7.7% of Canadian youth, aged 6 to 19, had any HL, for one or more pure-tone average. Four-frequency pure-tone average and high-frequency pure-tone average HL prevalence was 4.7 and 6.0%, respectively, whereas 5.8% had a low-frequency pure-tone average HL. Significantly more children/adolescents had unilateral HL. Mild HL was significantly

  9. Calculating ensemble averaged descriptions of protein rigidity without sampling.

    Directory of Open Access Journals (Sweden)

    Luis C González

    Full Text Available Previous works have demonstrated that protein rigidity is related to thermodynamic stability, especially under conditions that favor formation of native structure. Mechanical network rigidity properties of a single conformation are efficiently calculated using the integer body-bar Pebble Game (PG algorithm. However, thermodynamic properties require averaging over many samples from the ensemble of accessible conformations to accurately account for fluctuations in network topology. We have developed a mean field Virtual Pebble Game (VPG that represents the ensemble of networks by a single effective network. That is, all possible number of distance constraints (or bars that can form between a pair of rigid bodies is replaced by the average number. The resulting effective network is viewed as having weighted edges, where the weight of an edge quantifies its capacity to absorb degrees of freedom. The VPG is interpreted as a flow problem on this effective network, which eliminates the need to sample. Across a nonredundant dataset of 272 protein structures, we apply the VPG to proteins for the first time. Our results show numerically and visually that the rigidity characterizations of the VPG accurately reflect the ensemble averaged [Formula: see text] properties. This result positions the VPG as an efficient alternative to understand the mechanical role that chemical interactions play in maintaining protein stability.

  10. Accurate phylogenetic classification of DNA fragments based onsequence composition

    Energy Technology Data Exchange (ETDEWEB)

    McHardy, Alice C.; Garcia Martin, Hector; Tsirigos, Aristotelis; Hugenholtz, Philip; Rigoutsos, Isidore

    2006-05-01

    Metagenome studies have retrieved vast amounts of sequenceout of a variety of environments, leading to novel discoveries and greatinsights into the uncultured microbial world. Except for very simplecommunities, diversity makes sequence assembly and analysis a verychallenging problem. To understand the structure a 5 nd function ofmicrobial communities, a taxonomic characterization of the obtainedsequence fragments is highly desirable, yet currently limited mostly tothose sequences that contain phylogenetic marker genes. We show that forclades at the rank of domain down to genus, sequence composition allowsthe very accurate phylogenetic 10 characterization of genomic sequence.We developed a composition-based classifier, PhyloPythia, for de novophylogenetic sequence characterization and have trained it on adata setof 340 genomes. By extensive evaluation experiments we show that themethodis accurate across all taxonomic ranks considered, even forsequences that originate fromnovel organisms and are as short as 1kb.Application to two metagenome datasets 15 obtained from samples ofphosphorus-removing sludge showed that the method allows the accurateclassification at genus level of most sequence fragments from thedominant populations, while at the same time correctly characterizingeven larger parts of the samples at higher taxonomic levels.

  11. An accurate determination of the flux within a slab

    International Nuclear Information System (INIS)

    Ganapol, B.D.; Lapenta, G.

    1993-01-01

    During the past decade, several articles have been written concerning accurate solutions to the monoenergetic neutron transport equation in infinite and semi-infinite geometries. The numerical formulations found in these articles were based primarily on the extensive theoretical investigations performed by the open-quotes transport greatsclose quotes such as Chandrasekhar, Busbridge, Sobolev, and Ivanov, to name a few. The development of numerical solutions in infinite and semi-infinite geometries represents an example of how mathematical transport theory can be utilized to provide highly accurate and efficient numerical transport solutions. These solutions, or analytical benchmarks, are useful as open-quotes industry standards,close quotes which provide guidance to code developers and promote learning in the classroom. The high accuracy of these benchmarks is directly attributable to the rapid advancement of the state of computing and computational methods. Transport calculations that were beyond the capability of the open-quotes supercomputersclose quotes of just a few years ago are now possible at one's desk. In this paper, we again build upon the past to tackle the slab problem, which is of the next level of difficulty in comparison to infinite media problems. The formulation is based on the monoenergetic Green's function, which is the most fundamental transport solution. This method of solution requires a fast and accurate evaluation of the Green's function, which, with today's computational power, is now readily available

  12. Do Voters Learn? Evidence that Voters Respond Accurately to Changes in Political Parties’ Policy Positions

    DEFF Research Database (Denmark)

    Seeberg, Henrik Bech; Slothuus, Rune; Stubager, Rune

    2017-01-01

    A premise of the mass–elite linkage at the heart of representative democracy is that voters notice changes in political parties’ policy positions and update their party perceptions accordingly. However, recent studies question the ability of voters accurately to perceive changes in parties...... attention to parties when they visibly change policy position. Second, voters update their perceptions of the party positions much more accurately than would have been expected if they merely relied on a ‘coalition heuristic’ as a rule-of-thumb. These findings imply that under some conditions voters...

  13. Past-Year Treatment Utilization Among Individuals Meeting DSM-5 PTSD Criteria: Results From a Nationally Representative Sample.

    Science.gov (United States)

    Hale, Andrew C; Sripada, Rebecca K; Bohnert, Kipling M

    2018-03-01

    Little is known regarding treatment utilization among individuals meeting DSM-5 criteria for posttraumatic stress disorder (PTSD). Data were analyzed from the third wave of the National Epidemiologic Survey on Alcohol and Related Conditions, a nationally representative sample using DSM-5 criteria. Factors related to increased odds of PTSD treatment utilization for individuals meeting lifetime criteria included some college education versus less than a high school degree (odds ratio [OR]=3.17), having health insurance versus no insurance (OR=2.86), having a comorbid phobia disorder versus not having a phobia disorder (OR=1.36), and greater PTSD symptom count (OR=1.11). Older age (OR=.40), identifying as black or Asian versus white non-Hispanic (OR=.70 and OR=.28, respectively), and greater social functioning (OR=.98) were associated with decreased odds of PTSD treatment utilization. Results highlight factors that may be useful in identifying population subgroups with PTSD that are at risk for underutilization of services.

  14. The determination of the botanical origin in honeys with over-represented pollen: combination of melissopalynological, sensory and physicochemical analysis.

    Science.gov (United States)

    Rodopoulou, Maria-Anna; Tananaki, Chrysoula; Dimou, Maria; Liolios, Vasilios; Kanelis, Dimitrios; Goras, Georgios; Thrasyvoulou, Andreas

    2018-05-01

    Pollen analysis of honey is the basic method for the determination of its botanical origin. However, the presence of over-represented pollen in honeys may lead the analysis to false results. This can be more severe if this pollen is present in unifloral under-represented honeys of commercial importance (e.g. thyme honey). In the present study, we investigated the abundance of over-represented pollen grains on several quality characteristics in honey samples. In particular, we mixed honeys characterised as over-represented, specifically chestnut and eucalyptus, with thyme honeys in different analogies, and we also analysed the melissopalynological, organoleptic, physicochemical (water content, electrical conductivity, colour) and volatile characteristics of the blends. The most sensitive parameters were the microscopic characteristics, followed by the organoleptic ones. Blends of thyme honey with an originally low percentage of thyme pollen were the most influenced and could not be characterised as unifloral regarding their melissopalynological characteristics, even when they were mixed with small quantities of honeys with over-represented pollen (i.e. 5%). The present study confirms that, in the case of presence of over-represented pollen in honeys, pollen analysis alone cannot give trustworthy results for the determination of the botanical origin, even though their exclusion during pollen analysis, when they are present in percentages of up to 30%, could provide more accurate results. Consequently, pollen analysis should also be combined with the other analyses, especially in honeys with under-represented and over-represented pollens, to give safer results for the botanical characterisation of honeys. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  15. Fourier Transform Mass Spectrometry and Nuclear Magnetic Resonance Analysis for the Rapid and Accurate Characterization of Hexacosanoylceramide.

    Science.gov (United States)

    Ross, Charles W; Simonsick, William J; Bogusky, Michael J; Celikay, Recep W; Guare, James P; Newton, Randall C

    2016-06-28

    Ceramides are a central unit of all sphingolipids which have been identified as sites of biological recognition on cellular membranes mediating cell growth and differentiation. Several glycosphingolipids have been isolated, displaying immunomodulatory and anti-tumor activities. These molecules have generated considerable interest as potential vaccine adjuvants in humans. Accurate analyses of these and related sphingosine analogues are important for the characterization of structure, biological function, and metabolism. We report the complementary use of direct laser desorption ionization (DLDI), sheath flow electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) and high-field nuclear magnetic resonance (NMR) analysis for the rapid, accurate identification of hexacosanoylceramide and starting materials. DLDI does not require stringent sample preparation and yields representative ions. Sheath-flow ESI yields ions of the product and byproducts and was significantly better than monospray ESI due to improved compound solubility. Negative ion sheath flow ESI provided data of starting materials and products all in one acquisition as hexacosanoic acid does not ionize efficiently when ceramides are present. NMR provided characterization of these lipid molecules complementing the results obtained from MS analyses. NMR data was able to differentiate straight chain versus branched chain alkyl groups not easily obtained from mass spectrometry.

  16. Fourier Transform Mass Spectrometry and Nuclear Magnetic Resonance Analysis for the Rapid and Accurate Characterization of Hexacosanoylceramide

    Directory of Open Access Journals (Sweden)

    Charles W. Ross

    2016-06-01

    Full Text Available Ceramides are a central unit of all sphingolipids which have been identified as sites of biological recognition on cellular membranes mediating cell growth and differentiation. Several glycosphingolipids have been isolated, displaying immunomodulatory and anti-tumor activities. These molecules have generated considerable interest as potential vaccine adjuvants in humans. Accurate analyses of these and related sphingosine analogues are important for the characterization of structure, biological function, and metabolism. We report the complementary use of direct laser desorption ionization (DLDI, sheath flow electrospray ionization (ESI Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS and high-field nuclear magnetic resonance (NMR analysis for the rapid, accurate identification of hexacosanoylceramide and starting materials. DLDI does not require stringent sample preparation and yields representative ions. Sheath-flow ESI yields ions of the product and byproducts and was significantly better than monospray ESI due to improved compound solubility. Negative ion sheath flow ESI provided data of starting materials and products all in one acquisition as hexacosanoic acid does not ionize efficiently when ceramides are present. NMR provided characterization of these lipid molecules complementing the results obtained from MS analyses. NMR data was able to differentiate straight chain versus branched chain alkyl groups not easily obtained from mass spectrometry.

  17. Large-volume constant-concentration sampling technique coupling with surface-enhanced Raman spectroscopy for rapid on-site gas analysis

    Science.gov (United States)

    Zhang, Zhuomin; Zhan, Yisen; Huang, Yichun; Li, Gongke

    2017-08-01

    In this work, a portable large-volume constant-concentration (LVCC) sampling technique coupling with surface-enhanced Raman spectroscopy (SERS) was developed for the rapid on-site gas analysis based on suitable derivatization methods. LVCC sampling technique mainly consisted of a specially designed sampling cell including the rigid sample container and flexible sampling bag, and an absorption-derivatization module with a portable pump and a gas flowmeter. LVCC sampling technique allowed large, alterable and well-controlled sampling volume, which kept the concentration of gas target in headspace phase constant during the entire sampling process and made the sampling result more representative. Moreover, absorption and derivatization of gas target during LVCC sampling process were efficiently merged in one step using bromine-thiourea and OPA-NH4+ strategy for ethylene and SO2 respectively, which made LVCC sampling technique conveniently adapted to consequent SERS analysis. Finally, a new LVCC sampling-SERS method was developed and successfully applied for rapid analysis of trace ethylene and SO2 from fruits. It was satisfied that trace ethylene and SO2 from real fruit samples could be actually and accurately quantified by this method. The minor concentration fluctuations of ethylene and SO2 during the entire LVCC sampling process were proved to be samples were achieved in range of 95.0-101% and 97.0-104% respectively. It is expected that portable LVCC sampling technique would pave the way for rapid on-site analysis of accurate concentrations of trace gas targets from real samples by SERS.

  18. Social and psychological resources associated with health status in a representative sample of adults affected by the 2004 Florida hurricanes.

    Science.gov (United States)

    Ruggiero, Kenneth J; Amstadter, Ananda B; Acierno, Ron; Kilpatrick, Dean G; Resnick, Heidi S; Tracy, Melissa; Galea, Sandro

    2009-01-01

    Overall health status after a disaster may be associated with long-term physical morbidity and mortality. Little is known about factors associated with overall health status in the aftermath of disasters. We examined self-rated health in relation to disaster characteristics, social resources, and post-disaster outcomes in a sample of adults who experienced the 2004 Florida hurricanes. We interviewed a representative sample of 1,452 adults aged 18 years and older residing in the 33 Florida counties that were in the direct path of at least one of the 2004 hurricanes (Charley, Frances, Ivan, Jeanne). Overall health status was assessed using a self-rating format known to be predictive of mortality. Poor self-rated health was endorsed by 14.6% of the sample. Final multivariable models showed that poor self-rated health was associated with older age (p hurricane (p = 0.03), low social support (p = 0.03), and depression (p = 0.003) since the hurricane. Self-rated health following the Florida hurricanes was strongly associated with two variables (social support and depression) that potentially can be mitigated through targeted interventions after disasters. Future work should evaluate secondary prevention strategies that can address general health-related concerns in the wake of a disaster.

  19. Prescription pain reliever misuse and levels of pain impairment: 3-year course in a nationally representative outpatient sample of US adults

    Directory of Open Access Journals (Sweden)

    Novak SP

    2016-06-01

    Full Text Available Scott P Novak,1 Cristie Glasheen,1 Carl L Roland,2 1Behavioral Health Epidemiology, RTI International, 2Clinical Sciences and Outcomes Evidence, Pfizer Inc., Durham, NC, USA Background: The primary aim of this work was to present the prevalence data from the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC, a representative 3-year longitudinal survey (ages 18+ years that captured information on patterns of self-reported pain interference and prescription pain reliever misuse. A second aim was to assess the degree to which the risk of various types of opioid misuse (onset, desistance, and incidence of dependence was related to the longitudinal course of self-reported pain interference over the 3-year period. Methods: We used a two-wave, nationally representative sample of adults (aged 18+ years in which the baseline data were collected during 2001–2002 and a single follow-up was obtained ~3 years later (2004–2005 with 34,332 respondents with complete data on study variables for both waves. Results: Our findings indicated that ~10% reported high pain interference in the past month at each wave. There was tremendous stability in levels of pain, with ~5% reporting consistent levels of high impairment over the 3-year study, a proxy for chronic pain. Levels of pain were more strongly associated with prescription pain reliever misuse concurrently rather than prospectively, and the association was largely linear, with the likelihood of misuse increasing with levels of pain. Finally, health service factors were also prominent predictors of onset, but not the outcomes, of desistance or transitions to problem use. Conclusion: This study is the first to use a nationally representative sample with measures of pain and drug use history collected over an extended period. These results may help provide clinicians with an understanding that the risk of misuse is greatest when pain is active and may help guide the selection of

  20. Creating a sampling frame for population-based veteran research: representativeness and overlap of VA and Department of Defense databases.

    Science.gov (United States)

    Washington, Donna L; Sun, Su; Canning, Mark

    2010-01-01

    Most veteran research is conducted in Department of Veterans Affairs (VA) healthcare settings, although most veterans obtain healthcare outside the VA. Our objective was to determine the adequacy and relative contributions of Veterans Health Administration (VHA), Veterans Benefits Administration (VBA), and Department of Defense (DOD) administrative databases for representing the U.S. veteran population, using as an example the creation of a sampling frame for the National Survey of Women Veterans. In 2008, we merged the VHA, VBA, and DOD databases. We identified the number of unique records both overall and from each database. The combined databases yielded 925,946 unique records, representing 51% of the 1,802,000 U.S. women veteran population. The DOD database included 30% of the population (with 8% overlap with other databases). The VHA enrollment database contributed an additional 20% unique women veterans (with 6% overlap with VBA databases). VBA databases contributed an additional 2% unique women veterans (beyond 10% overlap with other databases). Use of VBA and DOD databases substantially expands access to the population of veterans beyond those in VHA databases, regardless of VA use. Adoption of these additional databases would enhance the value and generalizability of a wide range of studies of both male and female veterans.

  1. Sampling procedures for inventory of commercial volume tree species in Amazon Forest.

    Science.gov (United States)

    Netto, Sylvio P; Pelissari, Allan L; Cysneiros, Vinicius C; Bonazza, Marcelo; Sanquetta, Carlos R

    2017-01-01

    The spatial distribution of tropical tree species can affect the consistency of the estimators in commercial forest inventories, therefore, appropriate sampling procedures are required to survey species with different spatial patterns in the Amazon Forest. For this, the present study aims to evaluate the conventional sampling procedures and introduce the adaptive cluster sampling for volumetric inventories of Amazonian tree species, considering the hypotheses that the density, the spatial distribution and the zero-plots affect the consistency of the estimators, and that the adaptive cluster sampling allows to obtain more accurate volumetric estimation. We use data from a census carried out in Jamari National Forest, Brazil, where trees with diameters equal to or higher than 40 cm were measured in 1,355 plots. Species with different spatial patterns were selected and sampled with simple random sampling, systematic sampling, linear cluster sampling and adaptive cluster sampling, whereby the accuracy of the volumetric estimation and presence of zero-plots were evaluated. The sampling procedures applied to species were affected by the low density of trees and the large number of zero-plots, wherein the adaptive clusters allowed concentrating the sampling effort in plots with trees and, thus, agglutinating more representative samples to estimate the commercial volume.

  2. Determination of representative renal depth for accurate attenuation corred in measurement of glomerular filtration rate in transplanted kidney

    International Nuclear Information System (INIS)

    Oh, Soon Nam; Kim, Sung Hoon; Rha, Sung Eun; Chung, Yong An; Yoo, Ie Ryung; Sohn, Hyung Sun; Lee, Sung Young; Chung, Soo Kyo

    2002-01-01

    To measure reliable glomerular filtration rate by using the representative values of transplanted renal depths, which are measured with ultrasonography. We included 54 patients (26 men, 28 women), with having both renal scintigraphy and ultrasonography after renal transplantation. We measured DFR with Gates' method using the renal depth measured by ultrasonography, and median and mean ones in each patient. We compared GFR derived from ultrasonography-measured renal depth with GFR derived from median and mean renal depths. The correlation coefficients were obtained among GFR derived from ultrasonography-measured renal depths, median and mean renal depth under linear regression analysis. We determined whether GFR derived from median or mean renal depth could substitute GFR derived from ultrasonography-measured renal depth with Bland-Altman method. We analyze the expected errors of the GFR using representative renal depth in terms of age, sex, weight, height, creatinine value, and body surface. The transplanted renal depths range from 3.20 cm to 5.96 cm. The mean value and standard deviation of renal depths measured by ultrasonography are 4.09±0.65 cm in men, and 4.24±0.78 cm in women. The median value of renal depths measured by ultrasonography is 4.36 cm in men and 4.14 cm in women. The GFR derived from median renal depth is more consistent with GFR derived from ultrasonography-measured renal depth than GFR derived from mean renal depth. Differences of GFR derived from median and ultrasonography-measured renal depth are not significantly different in the groups classified with creatinine value, age, sex, height, weight and body surface. When median value is adapted as a representative renal depth, we could obtain reliable GFR in transplanted kidney simply

  3. Assessing the Risk Factors of Cyber and Mobile Phone Bullying Victimization in a Nationally Representative Sample of Singapore Youth.

    Science.gov (United States)

    Holt, Thomas J; Fitzgerald, Sarah; Bossler, Adam M; Chee, Grace; Ng, Esther

    2016-04-01

    This study utilized routine activity theory to examine the relationships between online behaviors, target suitability, and cyber and mobile phone-based bullying victimization in a nationally representative sample of youth from nine schools across Singapore. Key measures in all three categories-access to technology, online routine behaviors, and target suitability-were significant predictors of both forms of bullying victimization. In particular, females and victims of physical bullying were more likely to experience both forms of victimization. Access to technology and online routine behaviors predicted cyber and mobile phone-based bullying victimization differently. These findings demonstrate that routine activity theory is a viable framework to understand online bullying in non-Western nations, consistent with the existing literature on Western nations. © The Author(s) 2014.

  4. A NEW CLINICAL PREDICTION CRITERION ACCURATELY DETERMINES A SUBSET OF PATIENTS WITH BILATERAL PRIMARY ALDOSTERONISM BEFORE ADRENAL VENOUS SAMPLING.

    Science.gov (United States)

    Kocjan, Tomaz; Janez, Andrej; Stankovic, Milenko; Vidmar, Gaj; Jensterle, Mojca

    2016-05-01

    Adrenal venous sampling (AVS) is the only available method to distinguish bilateral from unilateral primary aldosteronism (PA). AVS has several drawbacks, so it is reasonable to avoid this procedure when the results would not affect clinical management. Our objective was to identify a clinical criterion that can reliably predict nonlateralized AVS as a surrogate for bilateral PA that is not treated surgically. A retrospective diagnostic cross-sectional study conducted at Slovenian national endocrine referral center included 69 consecutive patients (mean age 56 ± 8 years, 21 females) with PA who underwent AVS. PA was confirmed with the saline infusion test (SIT). AVS was performed sequentially during continuous adrenocorticotrophic hormone (ACTH) infusion. The main outcome measures were variables associated with nonlateralized AVS to derive a clinical prediction rule. Sixty-seven (97%) patients had a successful AVS and were included in the statistical analysis. A total of 39 (58%) patients had nonlateralized AVS. The combined criterion of serum potassium ≥3.5 mmol/L, post-SIT aldosterone AVS. The best overall classification accuracy (50/67 = 75%) was achieved using the post-SIT aldosterone level AVS. Our clinical prediction criterion appears to accurately determine a subset of patients with bilateral PA who could avoid unnecessary AVS and immediately commence with medical treatment.

  5. Life course persistent and adolescence limited conduct disorder in a nationally representative US sample: prevalence, predictors, and outcomes.

    Science.gov (United States)

    Moore, Ashlee A; Silberg, Judy L; Roberson-Nay, Roxann; Mezuk, Briana

    2017-04-01

    The course of conduct disorder (CD) is heterogeneous. Moffitt proposed the heuristic of life course persistent (LCP) and adolescence limited (AL) to differentiate etiologically distinct forms of antisocial behavior (AB), each with distinct predictors and consequences, although a few studies have assessed this demarcation within the context of CD. The objective of this study was to apply Moffitt's taxonomy in a nationally representative US sample to investigate the prevalence, predictors, and outcomes of LCP and AL CD. Data come from the Collaborative Psychiatric Epidemiology Studies, a set of population-based nationally representative cross-sectional surveys (N = 20,130). Predictors included harsh discipline, maternal and paternal closeness, poverty in childhood, history of learning disability, parental deviance, and nativity. Outcomes included substance use, employment status, education attainment, marital status, income level, and self-rated mental and physical health. The prevalence of LCP and AL CD was 0.5 and 4.6%, respectively, for females, and 1.9 and 5.1%, respectively, for males. Low childhood SES [Odds Ratio (OR) = 3.49], lack of maternal closeness (OR = 2.50), and history of harsh discipline (OR = 2.17) increased odds of LCP group membership. The LCP group had higher odds of developing substance use disorders (OR = 2.00) relative to AL. LCP CD is more strongly influenced by childhood environment and confers increased odds for substance use problems in adulthood relative to AL CD.

  6. Sample selection via angular distance in the space of the arguments of an artificial neural network

    Science.gov (United States)

    Fernández Jaramillo, J. M.; Mayerle, R.

    2018-05-01

    In the construction of an artificial neural network (ANN) a proper data splitting of the available samples plays a major role in the training process. This selection of subsets for training, testing and validation affects the generalization ability of the neural network. Also the number of samples has an impact in the time required for the design of the ANN and the training. This paper introduces an efficient and simple method for reducing the set of samples used for training a neural network. The method reduces the required time to calculate the network coefficients, while keeping the diversity and avoiding overtraining the ANN due the presence of similar samples. The proposed method is based on the calculation of the angle between two vectors, each one representing one input of the neural network. When the angle formed among samples is smaller than a defined threshold only one input is accepted for the training. The accepted inputs are scattered throughout the sample space. Tidal records are used to demonstrate the proposed method. The results of a cross-validation show that with few inputs the quality of the outputs is not accurate and depends on the selection of the first sample, but as the number of inputs increases the accuracy is improved and differences among the scenarios with a different starting sample have and important reduction. A comparison with the K-means clustering algorithm shows that for this application the proposed method with a smaller number of samples is producing a more accurate network.

  7. Cream of the Crop: Clinical Representativeness of Eligible and Ineligible Cannabis Users in Research.

    Science.gov (United States)

    Rosen, Alexis S; Sodos, Louise M; Hirst, Rayna B; Vaughn, Dylan; Lorkiewicz, Sara A

    2018-03-06

    Experts have recommended criteria (Gonzalez et al., 2002) for recruiting pure chronic cannabis users (i.e., those without polysubstance use or psychiatric illness) when evaluating cannabis' non-acute effects on cognition. We sought to demonstrate the implications of using such criteria by examining characteristics of respondents who completed an eligibility screening for a parent study evaluating the cognitive effects of chronic cannabis use. Over a 3-year, 8-month period, 612 respondents from the community completed an eligibility screening based on recommendations in the cannabis literature. Using independent samples t-tests and chi-square tests, we examined whether qualified/eligible respondents (n = 219) differed from non-qualified/ineligible respondents (n = 393). Compared to ineligible cannabis users, eligible cannabis-using respondents were significantly younger, used cannabis more frequently, used alcohol less frequently, and were less likely to have a history of other drug use, a psychiatric diagnosis, or to have used psychiatric medication. Conclusions/Importance: Our findings indicate that eligible/pure cannabis users are not representative of typical cannabis users in the general community (i.e., ineligible users with polysubstance use and/or psychiatric diagnoses) who ultimately comprised the majority of our cannabis-using sample (65.2%). Thus, typical cannabis users may be more accurately characterized as polysubstance users, posing a number of challenges related to the generalizability of findings from studies utilizing pure samples of cannabis users. Recruiting samples of typical cannabis users will improve external validity in research. Furthermore, reporting comprehensive characteristics of such samples will enable consumers to gauge the applicability of study findings to populations of interest.

  8. A single lysis solution for the analysis of tissue samples by different proteomic technologies

    DEFF Research Database (Denmark)

    Gromov, P.; Celis, J.E.; Gromova, I.

    2008-01-01

    -based proteomics (reverse-phase lysate arrays or direct antibody arrays), allowing the direct comparison of qualitative and quantitative data yielded by these technologies when applied to the same samples. The usefulness of the CLB1 solution for gel-based proteomics was further established by 2D PAGE analysis...... dissease, is driving scientists to increasingly use clinically relevant samples for biomarker and target discovery. Tissues are heterogeneous and as a result optimization of sample preparation is critical for generating accurate, representative, and highly reproducible quantitative data. Although a large...... number of protocols for preparation of tissue lysates has been published, so far no single recipe is able to provide a "one-size fits all" solubilization procedure that can be used to analyse the same lysate using different proteomics technologies. Here we present evidence showing that cell lysis buffer...

  9. High burden of homelessness among sexual-minority adolescents: findings from a representative Massachusetts high school sample.

    Science.gov (United States)

    Corliss, Heather L; Goodenow, Carol S; Nichols, Lauren; Austin, S Bryn

    2011-09-01

    We compared the prevalence of current homelessness among adolescents reporting a minority sexual orientation (lesbian/gay, bisexual, unsure, or heterosexual with same-sex sexual partners) with that among exclusively heterosexual adolescents. We combined data from the 2005 and 2007 Massachusetts Youth Risk Behavior Survey, a representative sample of public school students in grades 9 though 12 (n = 6317). Approximately 25% of lesbian/gay, 15% of bisexual, and 3% of exclusively heterosexual Massachusetts public high school students were homeless. Sexual-minority males and females had an odds of reporting current homelessness that was between 4 and 13 times that of their exclusively heterosexual peers. Sexual-minority youths' greater likelihood of being homeless was driven by their increased risk of living separately from their parents or guardians. Youth homelessness is linked with numerous threats such as violence, substance use, and mental health problems. Although discrimination and victimization related to minority sexual orientation status are believed to be important causal factors, research is needed to improve our understanding of the risks and protective factors for homelessness and to determine effective strategies to prevent homelessness in this population.

  10. Noniterative accurate algorithm for the exact exchange potential of density-functional theory

    International Nuclear Information System (INIS)

    Cinal, M.; Holas, A.

    2007-01-01

    An algorithm for determination of the exchange potential is constructed and tested. It represents a one-step procedure based on the equations derived by Krieger, Li, and Iafrate (KLI) [Phys. Rev. A 46, 5453 (1992)], implemented already as an iterative procedure by Kuemmel and Perdew [Phys. Rev. Lett. 90, 043004 (2003)]. Due to suitable transformation of the KLI equations, we can solve them avoiding iterations. Our algorithm is applied to the closed-shell atoms, from Be up to Kr, within the DFT exchange-only approximation. Using pseudospectral techniques for representing orbitals, we obtain extremely accurate values of total and orbital energies with errors at least four orders of magnitude smaller than known in the literature

  11. Body Mass Index Percentile Curves for 7 To 18 Year Old Children and Adolescents; are the Sample Populations from Tehran Nationally Representative?

    Directory of Open Access Journals (Sweden)

    Mostafa Hosseini

    2016-06-01

    Full Text Available Background: The children’s body composition status is an important indicator of health condition evaluated through their body mass index (BMI. We aimed to provide standardized percentile curves of BMI in a population of Iranian children and adolescents. We assessed the nationally representative of sample populations from Tehran. Materials and Methods: A total sample of 14,865 children aged 7-18 years was gathered. The Lambda-Mu-Sigma method was used to derive sex-specific smoothed centiles for age via the Lambda-Mu-Sigma Chart Maker Program. Finally, the prevalence of overweight and obesity with 95% confidence interval (CI was calculated. Results: BMI percentiles obtained from Tehran’s population, except for the 10th percentile, seem to be very slightly greater than the urban boys from all over Iran. BMI percentiles have an increasing trend by age that is S-shaped with a slight slope. Only in the 90th and 97th percentiles of BMI for girls, this rising trend seems to stop. Boys generally have higher BMIs than girls. The exceptions are younger ages of 90th and 97th percentiles and older ages of 3rd and 10th percentiles. A total number of 1,008 (13.20%; 95% CI: 12.46-13.98 boys and 603 (8.34%; 95% CI: 7.72-9.00 girls were categorized as overweight and obese. Obesity were observed in 402 (5.27%; 95% CI: 4.79-5.79 boys and 274 (3.76%; 95% CI: 3.35-4.22 girls. Conclusion: We construct BMI percentile curves by age and gender for 7 to 18 years Iranian children and adolescents. It can be concluded that sample populations from Tehran are nationally representative.

  12. Accurate measurement of gene copy number for human alpha-defensin DEFA1A3.

    Science.gov (United States)

    Khan, Fayeza F; Carpenter, Danielle; Mitchell, Laura; Mansouri, Omniah; Black, Holly A; Tyson, Jess; Armour, John A L

    2013-10-20

    Multi-allelic copy number variants include examples of extensive variation between individuals in the copy number of important genes, most notably genes involved in immune function. The definition of this variation, and analysis of its impact on function, has been hampered by the technical difficulty of large-scale but accurate typing of genomic copy number. The copy-variable alpha-defensin locus DEFA1A3 on human chromosome 8 commonly varies between 4 and 10 copies per diploid genome, and presents considerable challenges for accurate high-throughput typing. In this study, we developed two paralogue ratio tests and three allelic ratio measurements that, in combination, provide an accurate and scalable method for measurement of DEFA1A3 gene number. We combined information from different measurements in a maximum-likelihood framework which suggests that most samples can be assigned to an integer copy number with high confidence, and applied it to typing 589 unrelated European DNA samples. Typing the members of three-generation pedigrees provided further reassurance that correct integer copy numbers had been assigned. Our results have allowed us to discover that the SNP rs4300027 is strongly associated with DEFA1A3 gene copy number in European samples. We have developed an accurate and robust method for measurement of DEFA1A3 copy number. Interrogation of rs4300027 and associated SNPs in Genome-Wide Association Study SNP data provides no evidence that alpha-defensin copy number is a strong risk factor for phenotypes such as Crohn's disease, type I diabetes, HIV progression and multiple sclerosis.

  13. Jenis Sample: Keuntungan dan Kerugiannya

    OpenAIRE

    Suprapto, Agus

    1994-01-01

    Sample is a part of a population that are used in a study for purposes of making estimation about the nature of the total population that is obtained with sampling technic. Sampling technic is more adventagous than cencus because it can reduce cost, time, and it can gather deeper information and more accurate data. It is useful to distinguish two major types of sampling technics. First, Prob bility sampling i.e. simple random sampling. Second, Non Probability sampling i.e. systematic sam­plin...

  14. Chronic Stereotype Threat Is Associated With Mathematical Achievement on Representative Sample of Secondary Schoolgirls: The Role of Gender Identification, Working Memory, and Intellectual Helplessness

    OpenAIRE

    Sylwia Bedyńska; Izabela Krejtz; Grzegorz Sedek

    2018-01-01

    Stereotype threat affects performance in many different groups across many different domains. Despite a large body of experimental research on situational stereotype threat, little attention has been paid to the consequences of repeated experience of stereotype threat. Using structural equation modeling on data from a representative sample of girls from secondary schools, the current research examined the relations of chronic stereotype threat with mathematical achievement, and effectiveness ...

  15. Bell violation using entangled photons without the fair-sampling assumption.

    Science.gov (United States)

    Giustina, Marissa; Mech, Alexandra; Ramelow, Sven; Wittmann, Bernhard; Kofler, Johannes; Beyer, Jörn; Lita, Adriana; Calkins, Brice; Gerrits, Thomas; Nam, Sae Woo; Ursin, Rupert; Zeilinger, Anton

    2013-05-09

    The violation of a Bell inequality is an experimental observation that forces the abandonment of a local realistic viewpoint--namely, one in which physical properties are (probabilistically) defined before and independently of measurement, and in which no physical influence can propagate faster than the speed of light. All such experimental violations require additional assumptions depending on their specific construction, making them vulnerable to so-called loopholes. Here we use entangled photons to violate a Bell inequality while closing the fair-sampling loophole, that is, without assuming that the sample of measured photons accurately represents the entire ensemble. To do this, we use the Eberhard form of Bell's inequality, which is not vulnerable to the fair-sampling assumption and which allows a lower collection efficiency than other forms. Technical improvements of the photon source and high-efficiency transition-edge sensors were crucial for achieving a sufficiently high collection efficiency. Our experiment makes the photon the first physical system for which each of the main loopholes has been closed, albeit in different experiments.

  16. Buffer AVL Alone Does Not Inactivate Ebola Virus in a Representative Clinical Sample Type.

    Science.gov (United States)

    Smither, Sophie J; Weller, Simon A; Phelps, Amanda; Eastaugh, Lin; Ngugi, Sarah; O'Brien, Lyn M; Steward, Jackie; Lonsdale, Steve G; Lever, Mark S

    2015-10-01

    Rapid inactivation of Ebola virus (EBOV) is crucial for high-throughput testing of clinical samples in low-resource, outbreak scenarios. The EBOV inactivation efficacy of Buffer AVL (Qiagen) was tested against marmoset serum (EBOV concentration of 1 × 10(8) 50% tissue culture infective dose per milliliter [TCID50 · ml(-1)]) and murine blood (EBOV concentration of 1 × 10(7) TCID50 · ml(-1)) at 4:1 vol/vol buffer/sample ratios. Posttreatment cell culture and enzyme-linked immunosorbent assay (ELISA) analysis indicated that treatment with Buffer AVL did not inactivate EBOV in 67% of samples, indicating that Buffer AVL, which is designed for RNA extraction and not virus inactivation, cannot be guaranteed to inactivate EBOV in diagnostic samples. Murine blood samples treated with ethanol (4:1 [vol/vol] ethanol/sample) or heat (60°C for 15 min) also showed no viral inactivation in 67% or 100% of samples, respectively. However, combined Buffer AVL and ethanol or Buffer AVL and heat treatments showed total viral inactivation in 100% of samples tested. The Buffer AVL plus ethanol and Buffer AVL plus heat treatments were also shown not to affect the extraction of PCR quality RNA from EBOV-spiked murine blood samples. © Crown copyright 2015.

  17. Prevalence and sociodemographic associations of common mental disorders in a nationally representative sample of the general population of Greece.

    Science.gov (United States)

    Skapinakis, Petros; Bellos, Stefanos; Koupidis, Sotirios; Grammatikopoulos, Ilias; Theodorakis, Pavlos N; Mavreas, Venetsanos

    2013-06-04

    No study in Greece has assessed so far the full range of common mental disorders using a representative sample of the population from both mainland and insular regions of the country. The aim of the present paper was to present the results of the first such study. The study was carried out between 2009-2010 in a nationally representative sample of 4894 individuals living in private households in Greece. Common mental disorders in the past week were assessed with the revised Clinical Interview Schedule (CIS-R). We also assessed alcohol use disorders (using AUDIT), smoking and cannabis use. 14% of the population (Male: 11%, Female: 17%) was found to have clinically significant psychiatric morbidity according to the scores on the CIS-R. The prevalence (past seven days) of specific common mental disorders was as follows: Generalized Anxiety Disorder: 4.10% (95% CI: 3.54, 4.65); Depression: 2.90% (2.43, 3.37); Panic Disorder: 1.88% (1.50, 2.26); Obsessive-Compulsive Disorder: 1.69% (1.33, 2.05); All Phobias: 2.79% (2.33, 3.26); Mixed anxiety-depression: 2.67% (2.22, 3.12). Harmful alcohol use was reported by 12.69% of the population (11.75, 13.62). Regular smoking was reported by 39.60% of the population (38.22, 40.97) while cannabis use (at least once during the past month) by 2.06% (1.66, 2.46). Clinically significant psychiatric morbidity was positively associated with the following variables: female gender, divorced or widowed family status, low educational status and unemployment. Use of all substances was more common in men compared to women. Common mental disorders were often comorbid, undertreated, and associated with a lower quality of life. The findings of the present study can help in the better planning and development of mental health services in Greece, especially in a time of mental health budget restrictions.

  18. Improvement of the Work Environment and Work-Related Stress: A Cross-Sectional Multilevel Study of a Nationally Representative Sample of Japanese Workers.

    Science.gov (United States)

    Watanabe, Kazuhiro; Tabuchi, Takahiro; Kawakami, Norito

    2017-03-01

    This cross-sectional multilevel study aimed to investigate the relationship between improvement of the work environment and work-related stress in a nationally representative sample in Japan. The study was based on a national survey that randomly sampled 1745 worksites and 17,500 nested employees. The survey asked the worksites whether improvements of the work environment were conducted; and it asked the employees to report the number of work-related stresses they experienced. Multilevel multinominal logistic and linear regression analyses were conducted. Improvement of the work environment was not significantly associated with any level of work-related stress. Among men, it was significantly and negatively associated with the severe level of work-related stress. The association was not significant among women. Improvements to work environments may be associated with reduced work-related stress among men nationwide in Japan.

  19. Sex in Australia: autoerotic, esoteric and other sexual practices engaged in by a representative sample of adults.

    Science.gov (United States)

    Richters, Juliet; Grulich, Andrew E; de Visser, Richard O; Smith, Anthony M A; Rissel, Chris E

    2003-01-01

    To describe the prevalence of a range of autoerotic and other non-coital sexual practices among Australians. Computer-assisted telephone interviews were completed by a representative sample of 10,173 men and 9,134 women aged 16-59 years (response rate 73.1%). Respondents were asked whether in the past year they had: masturbated, engaged in various other autoerotic activities, or engaged in any of six other non-coital or esoteric practices. Half of the respondents (65% men, 35% women) had masturbated in the past year. Nearly half (48%) of the men and 25% of the women had masturbated in the past four weeks, among whom men had done so a mean of 5.8 times and women 3.3 times. About a quarter of all respondents had watched an X-rated film (37% men, 16% women), 12% of men and 14% of women had used a sex toy, and 17% of men and 2% of women had visited an Internet sex site. 17% of men and 14% of women had engaged in digital-anal stimulation with a partner. Phone sex, role play or dressing up, bondage and discipline, sadomasochism or dominance and submission (BDSM-DS), fisting (rectal or vaginal, insertive or receptive) and rimming (oral-anal stimulation) were all engaged in by less than 5% of the sample. Most of the practices studied were engaged in by more men than women. A range of autoerotic activities are both substitutes for partnered sex and additional sources of pleasure for people with sexual partners.

  20. Accurate and precise determination of small quantity uranium by means of automatic potentiometric titration

    International Nuclear Information System (INIS)

    Liu Quanwei; Luo Zhongyan; Zhu Haiqiao; Wu Jizong

    2007-01-01

    For high radioactivity level of dissolved solution of spent fuel and the solution of uranium product, radioactive hazard must be considered and reduced as low as possible during accurate determination of uranium. In this work automatic potentiometric titration was applied and the sample only 10 mg of uranium contained was taken in order to reduce the harm of analyzer suffered from the radioactivity. RSD<0.06%, at the same time the result can be corrected for more reliable and accurate measurement. The determination method can effectively reduce the harm of analyzer suffered from the radioactivity, and meets the requirement of reliable accurate measurement of uranium. (authors)

  1. Association of Some Vitamins and Minerals with Periodontitis in a Nationally Representative Sample of Korean Young Adults.

    Science.gov (United States)

    Park, Ji-A; Lee, Jung-Hwa; Lee, Hyo-Jin; Jin, Bo-Hyoung; Bae, Kwang-Hak

    2017-08-01

    The purpose of this study was to investigate whether the intakes of some kinds of vitamins and minerals are associated with periodontitis in a nationally representative sample of young adults. This study comprised 2049 young adults aged 19-39 years who took both periodontal examination and nutrition survey. The vitamin and mineral intakes were calculated from dietary intake data gained by complete one-day 24-h recall interviews, and the intake levels for each nutrient were classified by the Recommended Nutrient Intake (RNI) in Dietary Reference Intakes for Koreans and median values. Periodontitis was assessed using Community Periodontal Index (CPI). Multivariate logistic regression analyses were performed in a whole sample and subgroups with the strata of gender or smoking, following a complex sampling design. In analyses according to RNI, a lower intake of niacin was significantly associated with periodontitis in young adults (odd ratio [OR] 1.47, 95% confidential interval [CI] 1.09-2.00) and in its subgroup of women (OR 1.70; 95% CI 1.10-2.64) and current non-smokers (OR 1.75; 95% CI 1.22-2.51). Whereas, in analyses according to median intake values, there were significant associations of periodontitis with a lower intake of niacin in women (OR 1.58; 95% CI 1.02-2.46) and current non-smokers (OR 1.50; 95% CI 1.01-2.22), with lower intake of vitamin C in women (OR 1.66; 95% CI 1.04-2.64) and in current non-smokers (OR 1.49; 95% CI 1.04-2.14), with lower intake of iron in women (OR 1.85; 95% CI 1.11-3.07), and with lower intake of vitamin A marginally in women (OR 1.56; 95% CI 1.00-2.44). In young adults, periodonitis is significantly associated with the lower intakes of niacin, vitamin C, and iron, especially in women and current non-smokers.

  2. Commutability of food microbiology proficiency testing samples.

    Science.gov (United States)

    Abdelmassih, M; Polet, M; Goffaux, M-J; Planchon, V; Dierick, K; Mahillon, J

    2014-03-01

    Food microbiology proficiency testing (PT) is a useful tool to assess the analytical performances among laboratories. PT items should be close to routine samples to accurately evaluate the acceptability of the methods. However, most PT providers distribute exclusively artificial samples such as reference materials or irradiated foods. This raises the issue of the suitability of these samples because the equivalence-or 'commutability'-between results obtained on artificial vs. authentic food samples has not been demonstrated. In the clinical field, the use of noncommutable PT samples has led to erroneous evaluation of the performances when different analytical methods were used. This study aimed to provide a first assessment of the commutability of samples distributed in food microbiology PT. REQUASUD and IPH organized 13 food microbiology PTs including 10-28 participants. Three types of PT items were used: genuine food samples, sterile food samples and reference materials. The commutability of the artificial samples (reference material or sterile samples) was assessed by plotting the distribution of the results on natural and artificial PT samples. This comparison highlighted matrix-correlated issues when nonfood matrices, such as reference materials, were used. Artificially inoculated food samples, on the other hand, raised only isolated commutability issues. In the organization of a PT-scheme, authentic or artificially inoculated food samples are necessary to accurately evaluate the analytical performances. Reference materials, used as PT items because of their convenience, may present commutability issues leading to inaccurate penalizing conclusions for methods that would have provided accurate results on food samples. For the first time, the commutability of food microbiology PT samples was investigated. The nature of the samples provided by the organizer turned out to be an important factor because matrix effects can impact on the analytical results. © 2013

  3. Attention deficit hyperactivity disorder, other mental health problems, substance use, and driving: examination of a population-based, representative canadian sample.

    Science.gov (United States)

    Vingilis, Evelyn; Mann, Robert E; Erickson, Patricia; Toplak, Maggie; Kolla, Nathan J; Seeley, Jane; Jain, Umesh

    2014-01-01

    The purpose of this study is to examine the relationships among self-reported screening measures of attention deficit hyperactivity disorder (ADHD), other psychiatric problems, and driving-related outcomes in a provincially representative sample of adults 18 years and older living in the province of Ontario, Canada. The study examined the results of the Centre for Addictions and Mental Health (CAMH) Ontario Monitor, an ongoing repeated cross-sectional telephone survey of Ontario adults over a 2-year period. Measures included ADHD measures (Adult ADHD Self-Report Scale-V1.1 [ASRS-V1.1], previous ADHD diagnosis, ADHD medication use); psychiatric distress measures (General Health Questionnaire [GHQ12], use of pain, anxiety, and depression medication); antisocial behavior measure (The Antisocial Personality Disorder Scale from the Mini-International Neuropsychiatric Interview [APD]); substance use and abuse measures (alcohol, cannabis, and cocaine), Alcohol Use Disorders Identification Test (AUDIT), Alcohol, Smoking and Substance Involvement Screening Test (ASSIST), driving-related outcomes (driving after drinking, driving after cannabis use, street racing, collisions in past year), and sociodemographics (gender, age, vehicle-kilometers traveled). A total of 4,014 Ontario residents were sampled, of which 3,485 reported having a valid driver's license. Overall, 3.22% screened positive for ADHD symptoms on the ASRS-V1.1 screening tool. A greater percentage of those who screened positive were younger, reported previous ADHD diagnosis and medication use, distress, antisocial behavior, anti-anxiety and antidepressant medication use, substance use, and social problems compared to those who screened negative. However, there were no statistically significant differences between those who screened positive or negative for ADHD symptoms on self-reported driving after having 2 or more drinks in the previous hour; within an hour of using cannabis, marijuana, or hash; or in a

  4. On Practical Sampling of Bidirectional Reflectance

    DEFF Research Database (Denmark)

    Nielsen, Jannik Boll

    for reconstructing full and accurate BRDFs from only a few measurements is presented. It is here demonstrated that with as little as 20 point-samples, a BRDF can accurately be reconstructed. Furthermore utilising the field of view of a camera, this may be reduced to as little as two images. With this, the thesis...

  5. Representing Spatial Layout According to Intrinsic Frames of Reference.

    Science.gov (United States)

    Xie, Chaoxiang; Li, Shiyi; Tao, Weidong; Wei, Yiping; Sun, Hong-Jin

    2017-01-01

    Mou and McNamara have suggested that object locations are represented according to intrinsic reference frames. In three experiments, we investigated the limitations of intrinsic reference frames as a mean to represent object locations in spatial memory. Participants learned the locations of seven or eight common objects in a rectangular room and then made judgments of relative direction based on their memory of the layout. The results of all experiments showed that when all objects were positioned regularly, judgments of relative direction were faster or more accurate for novel headings that were aligned with the primary intrinsic structure than for other novel headings; however, when one irregularly positioned object was added to the layout, this advantage was eliminated. The experiments further indicated that with a single view at study, participants could represent the layout from either an egocentric orientation or a different orientation, according to experimental instructions. Together, these results suggest that environmental reference frames and intrinsic axes can influence performance for novel headings, but their role in spatial memory depends on egocentric experience, layout regularity, and instructions.

  6. Psychometric properties and measurement invariance of the Beck hopelessness scale (BHS): results from a German representative population sample.

    Science.gov (United States)

    Kliem, Sören; Lohmann, Anna; Mößle, Thomas; Brähler, Elmar

    2018-04-25

    The Beck Hopelessness Scale (BHS) has been the most frequently used instrument for the measurement of hopelessness in the past 40 years. Only recently has it officially been translated into German. The psychometric properties and factor structure of the BHS have been cause for intensive debate in the past. Based on a representative sample of the German population (N = 2450) item analysis including item sensitivity, item-total correlation and item difficulty was performed. Confirmatory factor analyses (CFA) for several factor solutions from the literature were performed. Multiple group factor analysis was performed to assess measurement invariance. Construct validity was assessed via the replication of well-established correlations with concurrently assessed measures. Most items exhibited adequate properties. Items #4, #8 and #13 exhibited poor item characteristics- each of these items had previously received negative evaluations in international studies. A one-dimensional factor solution, favorable for the calculation and interpretation of a sum score, was regarded as adequate. A bi-factor model with one content factor and two method factors (defined by positive/negative item coding) resulted in an excellent model fit. Cronbach's alpha in the current sample was .87. Hopelessness, as measured by the BHS, significantly correlated in the expected direction with suicidal ideation (r = .36), depression (r = .53) and life satisfaction (r = -.53). Strict measurement invariance could be established regarding gender and depression status. Due to limited research regarding the interpretation of fit indices with dichotomous data, interpretation of CFA results needs to remain tentative. The BHS is a valid measure of hopelessness in various subgroups of the general population. Future research could aim at replicating these findings using item response theory and cross-cultural samples. A one-dimensional bi-factor model seems appropriate even in a non

  7. Quantitative determination of minerals in Nevada Test Site samples by x-ray diffraction

    International Nuclear Information System (INIS)

    Pawloski, G.A.

    1983-07-01

    The external standard intensity ratio technique has been developed into a routine procedure for quantitatively determining mineralogic compositions of Nevada Test Site (NTS) samples by x-ray diffraction. This technique used ratios of x-ray intensity peaks from the same run which eliminates many possible errors. Constants have been determined for each of thirteen minerals commonly found in NTS samples - quartz, montmorillonite, illite, clinoptilolite, cristobalite, feldspars, calcite, dolomite, hornblende, kaolinite, muscovite, biotite, and amorphous glass. Ratios of the highest intensity peak of each mineral to be quantified in the sample and the highest intensity peak of quartz are used to calculate sample composition. The technique has been tested on samples with three to eleven components representative of geologic environments at NTS, and is accurate to 7.0 wt % of the total sample. The minimum amount of each of these minerals detectable by x-ray diffraction has also been determined. QUANTS is a computer code that calculates mineral contents and produces a report sheet. Constants for minerals in NTS samples other than those listed above can easily be determined, and added to QUANTS at any time

  8. Raman spectroscopy for highly accurate estimation of the age of refrigerated porcine muscle

    Science.gov (United States)

    Timinis, Constantinos; Pitris, Costas

    2016-03-01

    The high water content of meat, combined with all the nutrients it contains, make it vulnerable to spoilage at all stages of production and storage even when refrigerated at 5 °C. A non-destructive and in situ tool for meat sample testing, which could provide an accurate indication of the storage time of meat, would be very useful for the control of meat quality as well as for consumer safety. The proposed solution is based on Raman spectroscopy which is non-invasive and can be applied in situ. For the purposes of this project, 42 meat samples from 14 animals were obtained and three Raman spectra per sample were collected every two days for two weeks. The spectra were subsequently processed and the sample age was calculated using a set of linear differential equations. In addition, the samples were classified in categories corresponding to the age in 2-day steps (i.e., 0, 2, 4, 6, 8, 10, 12 or 14 days old), using linear discriminant analysis and cross-validation. Contrary to other studies, where the samples were simply grouped into two categories (higher or lower quality, suitable or unsuitable for human consumption, etc.), in this study, the age was predicted with a mean error of ~ 1 day (20%) or classified, in 2-day steps, with 100% accuracy. Although Raman spectroscopy has been used in the past for the analysis of meat samples, the proposed methodology has resulted in a prediction of the sample age far more accurately than any report in the literature.

  9. Do 16 Polycyclic Aromatic Hydrocarbons Represent PAH Air Toxicity?

    Science.gov (United States)

    Samburova, Vera; Zielinska, Barbara; Khlystov, Andrey

    2017-08-15

    Estimation of carcinogenic potency based on analysis of 16 polycyclic aromatic hydrocarbons (PAHs) ranked by U.S. Environmental Protection Agency (EPA) is the most popular approach within scientific and environmental air quality management communities. The majority of PAH monitoring projects have been focused on particle-bound PAHs, ignoring the contribution of gas-phase PAHs to the toxicity of PAH mixtures in air samples. In this study, we analyzed the results of 13 projects in which 88 PAHs in both gas and particle phases were collected from different sources (biomass burning, mining operation, and vehicle emissions), as well as in urban air. The aim was to investigate whether 16 particle-bound U.S. EPA priority PAHs adequately represented health risks of inhalation exposure to atmospheric PAH mixtures. PAH concentrations were converted to benzo(a)pyrene-equivalent (BaPeq) toxicity using the toxic equivalency factor (TEF) approach. TEFs of PAH compounds for which such data is not available were estimated using TEFs of close isomers. Total BaPeq toxicities (∑ 88 BaPeq) of gas- and particle-phase PAHs were compared with BaPeq toxicities calculated for the 16 particle-phase EPA PAH (∑ 16EPA BaPeq). The results showed that 16 EPA particle-bound PAHs underrepresented the carcinogenic potency on average by 85.6% relative to the total (gas and particle) BaPeq toxicity of 88 PAHs. Gas-phase PAHs, like methylnaphthalenes, may contribute up to 30% of ∑ 88 BaPeq. Accounting for other individual non-EPA PAHs (i.e., benzo(e)pyrene) and gas-phase PAHs (i.e., naphthalene, 1- and 2-methylnaphthalene) will make the risk assessment of PAH-containing air samples significantly more accurate.

  10. Easy and accurate reconstruction of whole HIV genomes from short-read sequence data with shiver

    Science.gov (United States)

    Blanquart, François; Golubchik, Tanya; Gall, Astrid; Bakker, Margreet; Bezemer, Daniela; Croucher, Nicholas J; Hall, Matthew; Hillebregt, Mariska; Ratmann, Oliver; Albert, Jan; Bannert, Norbert; Fellay, Jacques; Fransen, Katrien; Gourlay, Annabelle; Grabowski, M Kate; Gunsenheimer-Bartmeyer, Barbara; Günthard, Huldrych F; Kivelä, Pia; Kouyos, Roger; Laeyendecker, Oliver; Liitsola, Kirsi; Meyer, Laurence; Porter, Kholoud; Ristola, Matti; van Sighem, Ard; Cornelissen, Marion; Kellam, Paul; Reiss, Peter

    2018-01-01

    Abstract Studying the evolution of viruses and their molecular epidemiology relies on accurate viral sequence data, so that small differences between similar viruses can be meaningfully interpreted. Despite its higher throughput and more detailed minority variant data, next-generation sequencing has yet to be widely adopted for HIV. The difficulty of accurately reconstructing the consensus sequence of a quasispecies from reads (short fragments of DNA) in the presence of large between- and within-host diversity, including frequent indels, may have presented a barrier. In particular, mapping (aligning) reads to a reference sequence leads to biased loss of information; this bias can distort epidemiological and evolutionary conclusions. De novo assembly avoids this bias by aligning the reads to themselves, producing a set of sequences called contigs. However contigs provide only a partial summary of the reads, misassembly may result in their having an incorrect structure, and no information is available at parts of the genome where contigs could not be assembled. To address these problems we developed the tool shiver to pre-process reads for quality and contamination, then map them to a reference tailored to the sample using corrected contigs supplemented with the user’s choice of existing reference sequences. Run with two commands per sample, it can easily be used for large heterogeneous data sets. We used shiver to reconstruct the consensus sequence and minority variant information from paired-end short-read whole-genome data produced with the Illumina platform, for sixty-five existing publicly available samples and fifty new samples. We show the systematic superiority of mapping to shiver’s constructed reference compared with mapping the same reads to the closest of 3,249 real references: median values of 13 bases called differently and more accurately, 0 bases called differently and less accurately, and 205 bases of missing sequence recovered. We also

  11. Sample-size effects in fast-neutron gamma-ray production measurements: solid-cylinder samples

    International Nuclear Information System (INIS)

    Smith, D.L.

    1975-09-01

    The effects of geometry, absorption and multiple scattering in (n,Xγ) reaction measurements with solid-cylinder samples are investigated. Both analytical and Monte-Carlo methods are employed in the analysis. Geometric effects are shown to be relatively insignificant except in definition of the scattering angles. However, absorption and multiple-scattering effects are quite important; accurate microscopic differential cross sections can be extracted from experimental data only after a careful determination of corrections for these processes. The results of measurements performed using several natural iron samples (covering a wide range of sizes) confirm validity of the correction procedures described herein. It is concluded that these procedures are reliable whenever sufficiently accurate neutron and photon cross section and angular distribution information is available for the analysis. (13 figures, 5 tables) (auth)

  12. Fast and accurate three-dimensional point spread function computation for fluorescence microscopy.

    Science.gov (United States)

    Li, Jizhou; Xue, Feng; Blu, Thierry

    2017-06-01

    The point spread function (PSF) plays a fundamental role in fluorescence microscopy. A realistic and accurately calculated PSF model can significantly improve the performance in 3D deconvolution microscopy and also the localization accuracy in single-molecule microscopy. In this work, we propose a fast and accurate approximation of the Gibson-Lanni model, which has been shown to represent the PSF suitably under a variety of imaging conditions. We express the Kirchhoff's integral in this model as a linear combination of rescaled Bessel functions, thus providing an integral-free way for the calculation. The explicit approximation error in terms of parameters is given numerically. Experiments demonstrate that the proposed approach results in a significantly smaller computational time compared with current state-of-the-art techniques to achieve the same accuracy. This approach can also be extended to other microscopy PSF models.

  13. Representativeness of soil samples collected to assess mining-related contamination of flood plains in southeast Kansas

    Science.gov (United States)

    Juracek, Kyle E.

    2015-01-01

    Historical lead and zinc mining in the Tri-State Mining District (TSMD), located in parts of southeast Kansas, southwest Missouri, and northeast Oklahoma, has resulted in a substantial ongoing input of lead and zinc to the environment (Juracek, 2006; Juracek and Becker, 2009). In response to concern about the mining-related contamination, southeast Cherokee County, Kansas, was listed on the U.S. Environmental Protection Agency’s (USEPA) National Priority List as a Superfund hazardous waste site (fig. 1). To provide some of the information needed to support remediation efforts in the Cherokee County Superfund site, a study was begun in 2009 by the U.S. Geological Survey (USGS) that was requested and funded by USEPA. As part of the study, surficial-soil sampling was used to investigate the extent and magnitude of mining-related lead and zinc contamination in the flood plains of the Spring River and several tributaries within the Superfund site. In mining-affected areas, flood-plain soils had lead and zinc concentrations that far exceeded background levels as well as probable-effects guidelines for toxic aquatic biological effects (Juracek, 2013). Lead- and zinc-contaminated flood plains are a concern, in part, because they represent a long-term source of contamination to the fluvial environment.

  14. Frequency of Aggressive Behaviors in a Nationally Representative Sample of Iranian Children and Adolescents: The CASPIAN-IV Study.

    Science.gov (United States)

    Sadinejad, Morteza; Bahreynian, Maryam; Motlagh, Mohammad-Esmaeil; Qorbani, Mostafa; Movahhed, Mohsen; Ardalan, Gelayol; Heshmat, Ramin; Kelishadi, Roya

    2015-01-01

    This study aims to explore the frequency of aggressive behaviors among a nationally representative sample of Iranian children and adolescents. This nationwide study was performed on a multi-stage sample of 6-18 years students, living in 30 provinces in Iran. Students were asked to confidentially report the frequency of aggressive behaviors including physical fighting, bullying and being bullied in the previous 12 months, using the questionnaire of the World Health Organization Global School Health Survey. In this cross-sectional study, 13,486 students completed the study (90.6% participation rate); they consisted of 49.2% girls and 75.6% urban residents. The mean age of participants was 12.47 years (95% confidence interval: 12.29, 12.65). In total, physical fight was more prevalent among boys than girls (48% vs. 31%, P bulling to other classmates had a higher frequency among boys compared to girls (29% vs. 25%, P bulling to others). Physical fighting was more prevalent among rural residents (40% vs. 39%, respectively, P = 0.61), while being bullied was more common among urban students (27% vs. 26%, respectively, P = 0.69). Although in this study the frequency of aggressive behaviors was lower than many other populations, still these findings emphasize on the importance of designing preventive interventions that target the students, especially in early adolescence, and to increase their awareness toward aggressive behaviors. Implications for future research and aggression prevention programming are recommended.

  15. Robust and accurate vectorization of line drawings.

    Science.gov (United States)

    Hilaire, Xavier; Tombre, Karl

    2006-06-01

    This paper presents a method for vectorizing the graphical parts of paper-based line drawings. The method consists of separating the input binary image into layers of homogeneous thickness, skeletonizing each layer, segmenting the skeleton by a method based on random sampling, and simplifying the result. The segmentation method is robust with a best bound of 50 percent noise reached for indefinitely long primitives. Accurate estimation of the recognized vector's parameters is enabled by explicitly computing their feasibility domains. Theoretical performance analysis and expression of the complexity of the segmentation method are derived. Experimental results and comparisons with other vectorization systems are also provided.

  16. Exploring Representativeness and Informativeness for Active Learning.

    Science.gov (United States)

    Du, Bo; Wang, Zengmao; Zhang, Lefei; Zhang, Liangpei; Liu, Wei; Shen, Jialie; Tao, Dacheng

    2017-01-01

    How can we find a general way to choose the most suitable samples for training a classifier? Even with very limited prior information? Active learning, which can be regarded as an iterative optimization procedure, plays a key role to construct a refined training set to improve the classification performance in a variety of applications, such as text analysis, image recognition, social network modeling, etc. Although combining representativeness and informativeness of samples has been proven promising for active sampling, state-of-the-art methods perform well under certain data structures. Then can we find a way to fuse the two active sampling criteria without any assumption on data? This paper proposes a general active learning framework that effectively fuses the two criteria. Inspired by a two-sample discrepancy problem, triple measures are elaborately designed to guarantee that the query samples not only possess the representativeness of the unlabeled data but also reveal the diversity of the labeled data. Any appropriate similarity measure can be employed to construct the triple measures. Meanwhile, an uncertain measure is leveraged to generate the informativeness criterion, which can be carried out in different ways. Rooted in this framework, a practical active learning algorithm is proposed, which exploits a radial basis function together with the estimated probabilities to construct the triple measures and a modified best-versus-second-best strategy to construct the uncertain measure, respectively. Experimental results on benchmark datasets demonstrate that our algorithm consistently achieves superior performance over the state-of-the-art active learning algorithms.

  17. Accurate depth profiling for ultra-shallow implants using backside-SIMS

    International Nuclear Information System (INIS)

    Hongo, Chie; Tomita, Mitsuhiro; Takenaka, Miyuki

    2004-01-01

    We studied methods for accurate depth profiling for ultra-shallow implants using backside-SIMS. For the measurement of ultra-shallow profiles, the effects of surface transient and atomic mixing are not negligible. Therefore, we applied backside-SIMS to analyze ultra-shallow doping in order to exclude these effects. Backside-SIMS profiles show a sharper ion implantation tail than surface-side-SIMS profiles. In addition, the primary ion energy dependence becomes weaker when backside-SIMS is used [Surf. Interf. Anal. 29 (2000) 362; Appl. Surf. Sci. 203-204 (2003) 264; J. Vac. Sci. Technol. B 21 (2003) 1422]. However, the peak concentration of the backside sample was lower than that of the surface-side sample. Therefore, the sample flatness was estimated using the SIMS response function. Furthermore, SIMS profiles were simulated using SIMS response functions. This simulation shows how the sample flatness affects the SIMS profile

  18. Combining linear polarization spectroscopy and the Representative Layer Theory to measure the Beer-Lambert law absorbance of highly scattering materials.

    Science.gov (United States)

    Gobrecht, Alexia; Bendoula, Ryad; Roger, Jean-Michel; Bellon-Maurel, Véronique

    2015-01-01

    Visible and Near Infrared (Vis-NIR) Spectroscopy is a powerful non destructive analytical method used to analyze major compounds in bulk materials and products and requiring no sample preparation. It is widely used in routine analysis and also in-line in industries, in-vivo with biomedical applications or in-field for agricultural and environmental applications. However, highly scattering samples subvert Beer-Lambert law's linear relationship between spectral absorbance and the concentrations. Instead of spectral pre-processing, which is commonly used by Vis-NIR spectroscopists to mitigate the scattering effect, we put forward an optical method, based on Polarized Light Spectroscopy to improve the absorbance signal measurement on highly scattering samples. This method selects part of the signal which is less impacted by scattering. The resulted signal is combined in the Absorption/Remission function defined in Dahm's Representative Layer Theory to compute an absorbance signal fulfilling Beer-Lambert's law, i.e. being linearly related to concentration of the chemicals composing the sample. The underpinning theories have been experimentally evaluated on scattering samples in liquid form and in powdered form. The method produced more accurate spectra and the Pearson's coefficient assessing the linearity between the absorbance spectra and the concentration of the added dye improved from 0.94 to 0.99 for liquid samples and 0.84-0.97 for powdered samples. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Integrating the Theory of Sampling into Underground Mine Grade Control Strategies

    Directory of Open Access Journals (Sweden)

    Simon C. Dominy

    2018-05-01

    Full Text Available Grade control in underground mines aims to deliver quality tonnes to the process plant via the accurate definition of ore and waste. It comprises a decision-making process including data collection and interpretation; local estimation; development and mining supervision; ore and waste destination tracking; and stockpile management. The foundation of any grade control programme is that of high-quality samples collected in a geological context. The requirement for quality samples has long been recognised, where they should be representative and fit-for-purpose. Once a sampling error is introduced, it propagates through all subsequent processes contributing to data uncertainty, which leads to poor decisions and financial loss. Proper application of the Theory of Sampling reduces errors during sample collection, preparation, and assaying. To achieve quality, sampling techniques must minimise delimitation, extraction, and preparation errors. Underground sampling methods include linear (chip and channel, grab (broken rock, and drill-based samples. Grade control staff should be well-trained and motivated, and operating staff should understand the critical need for grade control. Sampling must always be undertaken with a strong focus on safety and alternatives sought if the risk to humans is high. A quality control/quality assurance programme must be implemented, particularly when samples contribute to a reserve estimate. This paper assesses grade control sampling with emphasis on underground gold operations and presents recommendations for optimal practice through the application of the Theory of Sampling.

  20. Funnel metadynamics as accurate binding free-energy method

    Science.gov (United States)

    Limongelli, Vittorio; Bonomi, Massimiliano; Parrinello, Michele

    2013-01-01

    A detailed description of the events ruling ligand/protein interaction and an accurate estimation of the drug affinity to its target is of great help in speeding drug discovery strategies. We have developed a metadynamics-based approach, named funnel metadynamics, that allows the ligand to enhance the sampling of the target binding sites and its solvated states. This method leads to an efficient characterization of the binding free-energy surface and an accurate calculation of the absolute protein–ligand binding free energy. We illustrate our protocol in two systems, benzamidine/trypsin and SC-558/cyclooxygenase 2. In both cases, the X-ray conformation has been found as the lowest free-energy pose, and the computed protein–ligand binding free energy in good agreement with experiments. Furthermore, funnel metadynamics unveils important information about the binding process, such as the presence of alternative binding modes and the role of waters. The results achieved at an affordable computational cost make funnel metadynamics a valuable method for drug discovery and for dealing with a variety of problems in chemistry, physics, and material science. PMID:23553839

  1. The U-tube sampling methodology and real-time analysis of geofluids

    International Nuclear Information System (INIS)

    Freifeld, Barry; Perkins, Ernie; Underschultz, James; Boreham, Chris

    2009-01-01

    The U-tube geochemical sampling methodology, an extension of the porous cup technique proposed by Wood (1973), provides minimally contaminated aliquots of multiphase fluids from deep reservoirs and allows for accurate determination of dissolved gas composition. The initial deployment of the U-tube during the Frio Brine Pilot CO 2 storage experiment, Liberty County, Texas, obtained representative samples of brine and supercritical CO 2 from a depth of 1.5 km. A quadrupole mass spectrometer provided real-time analysis of dissolved gas composition. Since the initial demonstration, the U-tube has been deployed for (1) sampling of fluids down gradient of the proposed Yucca Mountain High-Level Waste Repository, Armagosa Valley, Nevada (2) acquiring fluid samples beneath permafrost in Nunuvut Territory, Canada, and (3) at a CO 2 storage demonstration project within a depleted gas reservoir, Otway Basin, Victoria, Australia. The addition of in-line high-pressure pH and EC sensors allows for continuous monitoring of fluid during sample collection. Difficulties have arisen during U-tube sampling, such as blockage of sample lines from naturally occurring waxes or from freezing conditions; however, workarounds such as solvent flushing or heating have been used to address these problems. The U-tube methodology has proven to be robust, and with careful consideration of the constraints and limitations, can provide high quality geochemical samples.

  2. Fast and accurate calculation of dilute quantum gas using Uehling–Uhlenbeck model equation

    Energy Technology Data Exchange (ETDEWEB)

    Yano, Ryosuke, E-mail: ryosuke.yano@tokiorisk.co.jp

    2017-02-01

    The Uehling–Uhlenbeck (U–U) model equation is studied for the fast and accurate calculation of a dilute quantum gas. In particular, the direct simulation Monte Carlo (DSMC) method is used to solve the U–U model equation. DSMC analysis based on the U–U model equation is expected to enable the thermalization to be accurately obtained using a small number of sample particles and the dilute quantum gas dynamics to be calculated in a practical time. Finally, the applicability of DSMC analysis based on the U–U model equation to the fast and accurate calculation of a dilute quantum gas is confirmed by calculating the viscosity coefficient of a Bose gas on the basis of the Green–Kubo expression and the shock layer of a dilute Bose gas around a cylinder.

  3. The Association between Mental Health and Violence among a Nationally Representative Sample of College Students from the United States.

    Science.gov (United States)

    Schwartz, Joseph A; Beaver, Kevin M; Barnes, J C

    2015-01-01

    Recent violent attacks on college campuses in the United States have sparked discussions regarding the prevalence of psychiatric disorders and the perpetration of violence among college students. While previous studies have examined the potential association between mental health problems and violent behavior, the overall pattern of findings flowing from this literature remain mixed and no previous studies have examined such associations among college students. The current study makes use of a nationally representative sample of 3,929 college students from the National Epidemiologic Study on Alcohol and Related Conditions (NESARC) to examine the prevalence of seven violent behaviors and 19 psychiatric disorder diagnoses tapping mood, anxiety, personality, and substance use disorders. Associations between individual and composite psychiatric disorder diagnoses and violent behaviors were also examined. Additional analyses were adjusted for the comorbidity of multiple psychiatric diagnoses. The results revealed that college students were less likely to have engaged in violent behavior relative to the non-student sample, but a substantial portion of college students had engaged in violent behavior. Age- and sex-standardized prevalence rates indicated that more than 21% of college students reported at least one violent act. In addition, more than 36% of college students had at least one diagnosable psychiatric disorder. Finally, the prevalence of one or more psychiatric disorders significantly increased the odds of violent behavior within the college student sample. These findings indicate that violence and psychiatric disorders are prevalent on college campuses in the United States, though perhaps less so than in the general population. In addition, college students who have diagnosable psychiatric disorders are significantly more likely to engage in various forms of violent behavior.

  4. High prevalence of thiamine (vitamin B1) deficiency in early childhood among a nationally representative sample of Cambodian women of childbearing age and their children

    DEFF Research Database (Denmark)

    Whitfield, Kyly C; Smith, Geoffry; Chamnan, Chhoun

    2017-01-01

    the thiamine status (measured as erythrocyte thiamine diphosphate concentrations; eThDP) among a representative sample of Cambodian women of childbearing age (15-49 y) and their young children (6-69 mo). METHODOLOGY/PRINCIPLE FINDINGS: Samples for this cross-sectional analysis were collected as part...... of a national micronutrient survey linked to the Cambodian Demographic and Health Survey (CDHS) 2014. One-sixth of households taking part in the CDHS were randomly selected and re-visited for additional blood sampling for eThDP analysis (719 women and 761 children). Thiamine status was assessed using different...... cut-offs from literature. Women were mean (SD) 30 (6) y, and children (46% girls) were 41 (17) mo. Women had lower mean (95% CI) eThDP of 150 nmol/L (146-153) compared to children, 174 nmol/L (171-179; P

  5. Improvements to robotics-inspired conformational sampling in rosetta.

    Directory of Open Access Journals (Sweden)

    Amelie Stein

    Full Text Available To accurately predict protein conformations in atomic detail, a computational method must be capable of sampling models sufficiently close to the native structure. All-atom sampling is difficult because of the vast number of possible conformations and extremely rugged energy landscapes. Here, we test three sampling strategies to address these difficulties: conformational diversification, intensification of torsion and omega-angle sampling and parameter annealing. We evaluate these strategies in the context of the robotics-based kinematic closure (KIC method for local conformational sampling in Rosetta on an established benchmark set of 45 12-residue protein segments without regular secondary structure. We quantify performance as the fraction of sub-Angstrom models generated. While improvements with individual strategies are only modest, the combination of intensification and annealing strategies into a new "next-generation KIC" method yields a four-fold increase over standard KIC in the median percentage of sub-Angstrom models across the dataset. Such improvements enable progress on more difficult problems, as demonstrated on longer segments, several of which could not be accurately remodeled with previous methods. Given its improved sampling capability, next-generation KIC should allow advances in other applications such as local conformational remodeling of multiple segments simultaneously, flexible backbone sequence design, and development of more accurate energy functions.

  6. Prevalence of sleep duration on an average school night among 4 nationally representative successive samples of American high school students, 2007-2013.

    Science.gov (United States)

    Basch, Charles E; Basch, Corey H; Ruggles, Kelly V; Rajan, Sonali

    2014-12-11

    Consistency, quality, and duration of sleep are important determinants of health. We describe sleep patterns among demographically defined subgroups from the Youth Risk Behavior Surveillance System reported in 4 successive biennial representative samples of American high school students (2007 to 2013). Across the 4 waves of data collection, 6.2% to 7.7% of females and 8.0% to 9.4% of males reported obtaining 9 or more hours of sleep. Insufficient duration of sleep is pervasive among American high school students. Despite substantive public health implications, intervention research on this topic has received little attention.

  7. The WIPP Water Quality Sampling Program

    International Nuclear Information System (INIS)

    Uhland, D.; Morse, J.G.; Colton, D.

    1986-01-01

    The Waste Isolation Pilot Plant (WIPP), a Department of Energy facility, will be used for the underground disposal of wastes. The Water Quality Sampling Program (WQSP) is designed to obtain representative and reproducible water samples to depict accurate water composition data for characterization and monitoring programs in the vicinity of the WIPP. The WQSP is designed to input data into four major programs for the WIPP project: Geochemical Site Characterization, Radiological Baseline, Environmental Baseline, and Performance Assessment. The water-bearing units of interest are the Culebra and Magneta Dolomite Members of the Rustler Formation, units in the Dewey Lake Redbeds, and the Bell Canyon Formation. At least two chemically distinct types of water occur in the Culebra, one being a sodium/potassium chloride water and the other being a calcium/magnesium sulfate water. Water from the Culebra wells to the south of the WIPP site is distinctly fresher and tends to be of the calcium/magnesium sulfate type. Water in the Culebra in the north and around the WIPP site is distinctly fresher and tends to be of the sodium/potassium chloride type and is much higher in total dissolved solids. The program, which is currently 1 year old, will continue throughout the life of the facility as part of the Environmental Monitoring Program

  8. Association between the prevalence of depression and age in a large representative German sample of people aged 53 to 80 years.

    Science.gov (United States)

    Wild, Beate; Herzog, Wolfgang; Schellberg, Dieter; Lechner, Sabine; Niehoff, Doro; Brenner, Hermann; Rothenbacher, Dietrich; Stegmaier, Christa; Raum, Elke

    2012-04-01

    The aim of the study was to determine the association between the prevalence of clinically significant depression and age in a large representative sample of elderly German people. In the second follow-up (2005-2007) of the ESTHER cohort study, the 15-item geriatric depression scale (GDS-15) as well as a sociodemographic and clinical questionnaire were administered to a representative sample of 8270 people of ages 53 to 80 years. The prevalence of clinically significant depression was estimated using a GDS cut-off score of 5/6. Prevalence rates were estimated for the different age categories. Association between depression and age was analyzed using logistic regression, adjusted for gender, co-morbid medical disorders, education, marital status, physical activity, smoking, self-perceived cognitive impairment, and anti-depressive medication. Of the participants, 7878 (95.3%) completed more than twelve GDS items and were included in the study. The prevalence of clinically significant depression was 16.0% (95%CI = [15.2; 16.6]). The function of depression prevalence dependent on age group showed a U-shaped pattern (53-59: 21.0%, CI = [18.9; 23.3]; 60-64: 17.7%, CI = [15.7; 19.7]; 65-69: 12.6%, CI = [11.2; 14.0]; 70-74: 14.4%, CI = [12.6; 16.0]; 75-80: 17.1%, CI = [14.9; 19.4]). Adjusted odds ratios showed that the chances of being depressive decrease with the age category but remain relatively stable for people aged 65 and over. The prevalence of depression in the elderly seems to be associated with the age category. Adjusted odds ratios showed that people aged 60 and older had lower chances of being depressive than people aged 53 to 59 years. Copyright © 2011 John Wiley & Sons, Ltd.

  9. Age, sex, and racial differences in harsh physical punishment: results from a nationally representative United States sample.

    Science.gov (United States)

    Taillieu, Tamara L; Afifi, Tracie O; Mota, Natalie; Keyes, Katherine M; Sareen, Jitender

    2014-12-01

    The purpose of this research was to examine age, sex, and racial differences in the prevalence of harsh physical punishment in childhood in a nationally representative sample of the United States. Data were from the National Epidemiologic Survey on Alcohol and Related Conditions (NESARC) collected in 2004 and 2005 (n=34,653). Logistic regression analyses were conducted to examine age, sex, and racial differences in the prevalence of harsh physical punishment. Results suggest that the prevalence of harsh physical punishment has been decreasing among more recently born age groups; however, there appear to be sex and racial differences in this trend over time. The magnitude of the decrease appears to be stronger for males than for females. By race, the decrease in harsh physical punishment over time is only apparent among Whites; Black participants demonstrate little change over time, and harsh physical punishment seems to be increasing over time among Hispanics. Prevention and intervention efforts that educate about the links of physical punishment to negative outcomes and alternative non-physical discipline strategies may be particularly useful in reducing the prevalence of harsh physical punishment over time. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. The relationship between nonstandard working and mental health in a representative sample of the South Korean population.

    Science.gov (United States)

    Kim, Il-Ho; Muntaner, Carles; Khang, Young-Ho; Paek, Domyung; Cho, Sung-Il

    2006-08-01

    In light of escalating job insecurity due to increasing numbers of nonstandard workers, this study examined the association between nonstandard employment and mental health among South Korean workers. We analyzed a representative weighted sample of 2086 men and 1194 women aged 20-64 years, using data from the 1998 Korean National Health and Nutrition Examination Survey. Nonstandard employment included part-time work, temporary work, and daily work. Mental health was measured with indicators of self-reported depression and suicidal ideation. Based on age-adjusted prevalence of mental health, nonstandard employees were more likely to be mentally ill compared to standard employees. Furthermore, nonstandard work status was associated with poor mental health after adjusting for socioeconomic position (education, occupational class, and income) and health behaviors (smoking, alcohol consumption, and exercise). However, the pattern of the relationship between nonstandard work and mental health differed by gender. Female gender was significantly associated with poor mental health. Although males tended to report more suicidal ideation, this difference was not statistically significant. Considering the increasing prevalence of nonstandard working conditions in South Korea, the results call for more longitudinal research on the mental health effects of nonstandard work.

  11. Improved method for rapid and accurate isolation and identification of Streptococcus mutans and Streptococcus sobrinus from human plaque samples.

    Science.gov (United States)

    Villhauer, Alissa L; Lynch, David J; Drake, David R

    2017-08-01

    Mutans streptococci (MS), specifically Streptococcus mutans (SM) and Streptococcus sobrinus (SS), are bacterial species frequently targeted for investigation due to their role in the etiology of dental caries. Differentiation of S. mutans and S. sobrinus is an essential part of exploring the role of these organisms in disease progression and the impact of the presence of either/both on a subject's caries experience. Of vital importance to the study of these organisms is an identification protocol that allows us to distinguish between the two species in an easy, accurate, and timely manner. While conducting a 5-year birth cohort study in a Northern Plains American Indian tribe, the need for a more rapid procedure for isolating and identifying high volumes of MS was recognized. We report here on the development of an accurate and rapid method for MS identification. Accuracy, ease of use, and material and time requirements for morphological differentiation on selective agar, biochemical tests, and various combinations of PCR primers were compared. The final protocol included preliminary identification based on colony morphology followed by PCR confirmation of species identification using primers targeting regions of the glucosyltransferase (gtf) genes of SM and SS. This method of isolation and identification was found to be highly accurate, more rapid than the previous methodology used, and easily learned. It resulted in more efficient use of both time and material resources. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. A Bayesian Method for Weighted Sampling

    OpenAIRE

    Lo, Albert Y.

    1993-01-01

    Bayesian statistical inference for sampling from weighted distribution models is studied. Small-sample Bayesian bootstrap clone (BBC) approximations to the posterior distribution are discussed. A second-order property for the BBC in unweighted i.i.d. sampling is given. A consequence is that BBC approximations to a posterior distribution of the mean and to the sampling distribution of the sample average, can be made asymptotically accurate by a proper choice of the random variables that genera...

  13. Child sexual abuse as a risk factor for teen dating violence: Findings from a representative sample of Quebec youth

    Science.gov (United States)

    Hébert, Martine; Moreau, Catherine; Blais, Martin; Lavoie, Francine; Guerrier, Mireille

    2016-01-01

    Child sexual abuse (CSA) is identified as a significant risk factor for later victimization in the context of adult intimate relationships, but less is known about the risk associated with CSA in early romantic relationships. This paper aims to document the association between CSA and teen dating victimization in a large representative sample of Quebec high-school students. As part of the Youths’ Romantic Relationships Project, 8,194 teens completed measures on CSA and psychological, physical and sexual dating violence. After controlling for other interpersonal traumas, results show that CSA contributed to all three forms of dating victimization among both boys and girls. The heightened risk of revictimization appears to be stronger for male victims of CSA. Intervention and prevention efforts are clearly needed to reduce the vulnerability of male and female victims of sexual abuse who are entering the crucial phase of adolescence and first romantic relationships. PMID:29308104

  14. [Rosenberg self-esteem scale: validation in a representative sample of Chilean adults].

    Science.gov (United States)

    Rojas-Barahona, Cristian A; Zegers, Beatriz; Förster, Carla E

    2009-06-01

    Self-esteem is positively associated to the well being of people and could be a good mental health indicator. To determine the reliability and validity of the Rosenberg Self-esteem Scale in a Chilean adult sample. The instrument was applied to 473 subjects living in the Metropolitan Region of Santiago, evenly distributed according to gender, age, educational level and income. The Neugarten Life Satisfaction index (LSI-A) was also applied to the sample. Cronbach's alpha for reliability of the scale was 0.754. There was no gender bias and factor analysis grouped items into two factors (5 positive and 5 negative). The instrument had a correlation of 0.455 with the LSI-A. The Rosenberg Self-esteem Scale meets the criteria for validity and reliability of a quality instrument to measure self-esteem in Chile.

  15. Negative associations between corpus callosum midsagittal area and IQ in a representative sample of healthy children and adolescents.

    Directory of Open Access Journals (Sweden)

    Hooman Ganjavi

    Full Text Available Documented associations between corpus callosum size and cognitive ability have heretofore been inconsistent potentially owing to differences in sample characteristics, differing methodologies in measuring CC size, or the use of absolute versus relative measures. We investigated the relationship between CC size and intelligence quotient (IQ in the NIH MRI Study of Normal Brain Development sample, a large cohort of healthy children and adolescents (aged six to 18, n = 198 recruited to be representative of the US population. CC midsagittal area was measured using an automated system that partitioned the CC into 25 subregions. IQ was measured using the Wechsler Abbreviated Scale of Intelligence (WASI. After correcting for total brain volume and age, a significant negative correlation was found between total CC midsagittal area and IQ (r = -0.147; p = 0.040. Post hoc analyses revealed a significant negative correlation in children (age<12 (r = -0.279; p = 0.004 but not in adolescents (age≥12 (r = -0.005; p = 0.962. Partitioning the subjects by gender revealed a negative correlation in males (r = -0.231; p = 0.034 but not in females (r = 0.083; p = 0.389. Results suggest that the association between CC and intelligence is mostly driven by male children. In children, a significant gender difference was observed for FSIQ and PIQ, and in males, a significant age-group difference was observed for FSIQ and PIQ. These findings suggest that the correlation between CC midsagittal area and IQ may be related to age and gender.

  16. How Are Feedbacks Represented in Land Models?

    Directory of Open Access Journals (Sweden)

    Yang Chen

    2016-09-01

    Full Text Available Land systems are characterised by many feedbacks that can result in complex system behaviour. We defined feedbacks as the two-way influences between the land use system and a related system (e.g., climate, soils and markets, both of which are encompassed by the land system. Land models that include feedbacks thus probably more accurately mimic how land systems respond to, e.g., policy or climate change. However, representing feedbacks in land models is a challenge. We reviewed articles incorporating feedbacks into land models and analysed each with predefined indicators. We found that (1 most modelled feedbacks couple land use systems with transport, soil and market systems, while only a few include feedbacks between land use and social systems or climate systems; (2 equation-based land use models that follow a top-down approach prevail; and (3 feedbacks’ effects on system behaviour remain relatively unexplored. We recommend that land system modellers (1 consider feedbacks between land use systems and social systems; (2 adopt (bottom-up approaches suited to incorporating spatial heterogeneity and better representing land use decision-making; and (3 pay more attention to nonlinear system behaviour and its implications for land system management and policy.

  17. Accurate anisotropic material modelling using only tensile tests for hot and cold forming

    Science.gov (United States)

    Abspoel, M.; Scholting, M. E.; Lansbergen, M.; Neelis, B. M.

    2017-09-01

    Accurate material data for simulations require a lot of effort. Advanced yield loci require many different kinds of tests and a Forming Limit Curve (FLC) needs a large amount of samples. Many people use simple material models to reduce the effort of testing, however some models are either not accurate enough (i.e. Hill’48), or do not describe new types of materials (i.e. Keeler). Advanced yield loci describe the anisotropic materials behaviour accurately, but are not widely adopted because of the specialized tests, and data post-processing is a hurdle for many. To overcome these issues, correlations between the advanced yield locus points (biaxial, plane strain and shear) and mechanical properties have been investigated. This resulted in accurate prediction of the advanced stress points using only Rm, Ag and r-values in three directions from which a Vegter yield locus can be constructed with low effort. FLC’s can be predicted with the equations of Abspoel & Scholting depending on total elongation A80, r-value and thickness. Both predictive methods are initially developed for steel, aluminium and stainless steel (BCC and FCC materials). The validity of the predicted Vegter yield locus is investigated with simulation and measurements on both hot and cold formed parts and compared with Hill’48. An adapted specimen geometry, to ensure a homogeneous temperature distribution in the Gleeble hot tensile test, was used to measure the mechanical properties needed to predict a hot Vegter yield locus. Since for hot material, testing of stress states other than uniaxial is really challenging, the prediction for the yield locus adds a lot of value. For the hot FLC an A80 sample with a homogeneous temperature distribution is needed which is due to size limitations not possible in the Gleeble tensile tester. Heating the sample in an industrial type furnace and tensile testing it in a dedicated device is a good alternative to determine the necessary parameters for the FLC

  18. Accurate thickness measurement of graphene

    International Nuclear Information System (INIS)

    Shearer, Cameron J; Slattery, Ashley D; Stapleton, Andrew J; Shapter, Joseph G; Gibson, Christopher T

    2016-01-01

    Graphene has emerged as a material with a vast variety of applications. The electronic, optical and mechanical properties of graphene are strongly influenced by the number of layers present in a sample. As a result, the dimensional characterization of graphene films is crucial, especially with the continued development of new synthesis methods and applications. A number of techniques exist to determine the thickness of graphene films including optical contrast, Raman scattering and scanning probe microscopy techniques. Atomic force microscopy (AFM), in particular, is used extensively since it provides three-dimensional images that enable the measurement of the lateral dimensions of graphene films as well as the thickness, and by extension the number of layers present. However, in the literature AFM has proven to be inaccurate with a wide range of measured values for single layer graphene thickness reported (between 0.4 and 1.7 nm). This discrepancy has been attributed to tip-surface interactions, image feedback settings and surface chemistry. In this work, we use standard and carbon nanotube modified AFM probes and a relatively new AFM imaging mode known as PeakForce tapping mode to establish a protocol that will allow users to accurately determine the thickness of graphene films. In particular, the error in measuring the first layer is reduced from 0.1–1.3 nm to 0.1–0.3 nm. Furthermore, in the process we establish that the graphene-substrate adsorbate layer and imaging force, in particular the pressure the tip exerts on the surface, are crucial components in the accurate measurement of graphene using AFM. These findings can be applied to other 2D materials. (paper)

  19. Dietary Acid Load and Potassium Intake Associate with Blood Pressure and Hypertension Prevalence in a Representative Sample of the German Adult Population

    Directory of Open Access Journals (Sweden)

    Danika Krupp

    2018-01-01

    Full Text Available Diets rich in fruits and vegetables, like the Dietary Approaches to Stop Hypertension (DASH-diet, are usually characterized by high potassium intake and reduced dietary acid load, and have been shown to reduce blood pressure (BP. However, the relevance of potential renal acid load (PRAL for BP has not been compared with the relevance to BP of urinary biomarker (K-urine- and dietary food frequency questionnaire (K-FFQ-based estimates of potassium intake in a general adult population sample. For 6788 participants (aged 18–79 years of the representative German Health-Interview and Examination Survey for Adults (DEGS1, associations of PRAL, K-urine, and K-FFQ with BP and hypertension prevalence were cross-sectionally examined in multivariable linear and logistic regression models. PRAL was significantly associated with higher systolic BP (p = 0.0002 and higher hypertension prevalence (Odds ratio [OR] high vs. low PRAL = 1.45, p = 0.0004 in models adjusted for age, sex, body mass index (BMI, estimated sodium intake, kidney function, relevant medication, and further important covariates. Higher estimates of K-FFQ and K-urine were related to lower systolic BP (p = 0.04 and p < 0.0001 and lower hypertension prevalence (OR = 0.82, p = 0.04 and OR = 0.77, p = 0.02 as well as a lower diastolic BP (p = 0.03 and p = 0.0003. Our results show, for the first time in a comparative analysis of a large representative population sample, significant relationships of BP and hypertension prevalence with questionnaire- and biomarker-based estimates of potassium intake and with an estimate of dietary acid load.

  20. Personality correlates of type 1 diabetes in a national representative sample

    OpenAIRE

    Čukić, Iva; Weiss, Alexander

    2016-01-01

    We examined cross-sectional relationships between personality traits and type 1 diabetes. The sample (N=8490) was taken from the 1982-84 wave of the National Health and Nutrition Examination Survey Epidemiological Follow-up Study. We fit three logistic regression models to test whether neuroticism, extraversion, openness, or the Type A behavior pattern were associated with type 1 diabetes. Model 1 included sex, age, race/ethnicity and all four personality traits. Model 2 added depressive symp...

  1. Eating style, overeating and weight gain. A prospective 2-year follow-up study in a representative Dutch sample.

    Science.gov (United States)

    van Strien, Tatjana; Herman, C Peter; Verheijden, Marieke W

    2012-12-01

    This study examined which individuals are particularly at risk for developing overweight and whether there are behavioral lifestyle factors that may attenuate this susceptibility. A prospective study with a 2-year follow-up was conducted in a sample representative of the general population of The Netherlands (n=590). Body mass change (self-reported) was assessed in relation to overeating and change in physical activity (both self-reported), dietary restraint, emotional eating, and external eating, as assessed by the Dutch Eating Behavior Questionnaire. There was a consistent main (suppressive) effect of increased physical activity on BMI change. Only emotional eating and external eating moderated the relation between overeating and body mass change. However, the interaction effect of external eating became borderline significant with Yes or No meaningful weight gain (weight gain >3%) as dependent variable. It was concluded that whilst increasing physical activity may attenuate weight gain, particularly high emotional eaters seem at risk for developing overweight, because overconsumption seems to be more strongly related to weight gain in people with high degrees of emotional eating. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. How many standard area diagram sets are needed for accurate disease severity assessment

    Science.gov (United States)

    Standard area diagram sets (SADs) are widely used in plant pathology: a rater estimates disease severity by comparing an unknown sample to actual severities in the SADs and interpolates an estimate as accurately as possible (although some SADs have been developed for categorizing disease too). Most ...

  3. Large Sample Neutron Activation Analysis of Heterogeneous Samples

    International Nuclear Information System (INIS)

    Stamatelatos, I.E.; Vasilopoulou, T.; Tzika, F.

    2018-01-01

    A Large Sample Neutron Activation Analysis (LSNAA) technique was developed for non-destructive analysis of heterogeneous bulk samples. The technique incorporated collimated scanning and combining experimental measurements and Monte Carlo simulations for the identification of inhomogeneities in large volume samples and the correction of their effect on the interpretation of gamma-spectrometry data. Corrections were applied for the effect of neutron self-shielding, gamma-ray attenuation, geometrical factor and heterogeneous activity distribution within the sample. A benchmark experiment was performed to investigate the effect of heterogeneity on the accuracy of LSNAA. Moreover, a ceramic vase was analyzed as a whole demonstrating the feasibility of the technique. The LSNAA results were compared against results obtained by INAA and a satisfactory agreement between the two methods was observed. This study showed that LSNAA is a technique capable to perform accurate non-destructive, multi-elemental compositional analysis of heterogeneous objects. It also revealed the great potential of the technique for the analysis of precious objects and artefacts that need to be preserved intact and cannot be damaged for sampling purposes. (author)

  4. Home Circadian Phase Assessments with Measures of Compliance Yield Accurate Dim Light Melatonin Onsets.

    Science.gov (United States)

    Burgess, Helen J; Wyatt, James K; Park, Margaret; Fogg, Louis F

    2015-06-01

    There is a need for the accurate assessment of circadian phase outside of the clinic/laboratory, particularly with the gold standard dim light melatonin onset (DLMO). We tested a novel kit designed to assist in saliva sampling at home for later determination of the DLMO. The home kit includes objective measures of compliance to the requirements for dim light and half-hourly saliva sampling. Participants were randomized to one of two 10-day protocols. Each protocol consisted of two back-to-back home and laboratory phase assessments in counterbalanced order, separated by a 5-day break. Laboratory or participants' homes. Thirty-five healthy adults, age 21-62 y. N/A. Most participants received at least one 30-sec epoch of light > 50 lux during the home phase assessments (average light intensity 4.5 lux), but on average for light > 50 lux or sampling errors. There was no significant difference between the home and laboratory DLMOs (P > 0.05); on average the home DLMOs occurred 9.6 min before the laboratory DLMOs. The home DLMOs were highly correlated with the laboratory DLMOs (r = 0.91, P dim light melatonin onsets (DLMOs) demonstrates that including objective measures of light exposure and sample timing during home saliva sampling can lead to accurate home DLMOs. Circadian Phase Assessments at Home, http://clinicaltrials.gov/show/NCT01487252, NCT01487252. © 2015 Associated Professional Sleep Societies, LLC.

  5. Sampling of charged liquid radwaste stored in large tanks

    International Nuclear Information System (INIS)

    Tchemitcheff, E.; Domage, M.; Bernard-Bruls, X.

    1995-01-01

    The final safe disposal of radwaste, in France and elsewhere, entails, for liquid effluents, their conversion to a stable solid form, hence implying their conditioning. The production of conditioned waste with the requisite quality, traceability of the characteristics of the packages produced, and safe operation of the conditioning processes, implies at least the accurate knowledge of the chemical and radiochemical properties of the effluents concerned. The problem in sampling the normally charged effluents is aggravated for effluents that have been stored for several years in very large tanks, without stirring and retrieval systems. In 1992, SGN was asked by Cogema to study the retrieval and conditioning of LL/ML chemical sludge and spent ion-exchange resins produced in the operation of the UP2 400 plant at La Hague, and stored temporarily in rectangular silos and tanks. The sampling aspect was crucial for validating the inventories, identifying the problems liable to arise in the aging of the effluents, dimensioning the retrieval systems and checking the transferability and compatibility with the downstream conditioning process. Two innovative self-contained systems were developed and built for sampling operations, positioned above the tanks concerned. Both systems have been operated in active conditions and have proved totally satisfactory for taking representative samples. Today SGN can propose industrially proven overall solutions, adaptable to the various constraints of many spent fuel cycle operators

  6. The longitudinal relation between peer violent victimization and delinquency: results from a national representative sample of u.s. Adolescents.

    Science.gov (United States)

    Jackson, Corrie L; Hanson, Rochelle F; Amstadter, Ananda B; Saunders, Benjamin E; Kilpatrick, Dean G

    2013-05-01

    Using a nationally representative sample of adolescents from the United States aged 12 to 17 years (Wave 1, n = 3,614; Wave 2, n = 2,511), this study examined (a) demographic and descriptive information about peer violent victimization (PVV); and (b) the longitudinal relation between a history of PVV and delinquency. Results indicated that 12.4% of adolescents reported lifetime exposure to PVV, and many of these adolescents with a previous history of PVV also reported exposure to other forms of interpersonal violence, with witnessing community/school violence being the most commonly endorsed exposure category. Males, older adolescents, African American adolescents, and adolescents from low-income households were significantly more likely to endorse PVV. Regardless of the victim's gender, the majority of the perpetrators were male. After controlling for exposure to other forms of interpersonal violence and a history of delinquency, PVV was related to subsequent delinquency. Implications for policy, practice, and future research are discussed.

  7. Representativeness of two sampling procedures for an internet intervention targeting cancer-related distress: a comparison of convenience and registry samples

    OpenAIRE

    Owen, Jason E.; Bantum, Erin O'Carroll; Criswell, Kevin; Bazzo, Julie; Gorlick, Amanda; Stanton, Annette L.

    2013-01-01

    Internet interventions often rely on convenience sampling, yet convenience samples may differ in important ways from systematic recruitment approaches. The purpose of this study was to evaluate potential demographic, medical, and psychosocial differences between Internet-recruited and registry-recruited cancer survivors in an Internet-based intervention. Participants were recruited from a cancer registry (n = 80) and via broad Internet outreach efforts (n = 160). Participants completed a set ...

  8. Short communication: Genetic lag represents commercial herd genetic merit more accurately than the 4-path selection model.

    Science.gov (United States)

    Dechow, C D; Rogers, G W

    2018-05-01

    Expectation of genetic merit in commercial dairy herds is routinely estimated using a 4-path genetic selection model that was derived for a closed population, but commercial herds using artificial insemination sires are not closed. The 4-path model also predicts a higher rate of genetic progress in elite herds that provide artificial insemination sires than in commercial herds that use such sires, which counters other theoretical assumptions and observations of realized genetic responses. The aim of this work is to clarify whether genetic merit in commercial herds is more accurately reflected under the assumptions of the 4-path genetic response formula or by a genetic lag formula. We demonstrate by tracing the transmission of genetic merit from parents to offspring that the rate of genetic progress in commercial dairy farms is expected to be the same as that in the genetic nucleus. The lag in genetic merit between the nucleus and commercial farms is a function of sire and dam generation interval, the rate of genetic progress in elite artificial insemination herds, and genetic merit of sires and dams. To predict how strategies such as the use of young versus daughter-proven sires, culling heifers following genomic testing, or selective use of sexed semen will alter genetic merit in commercial herds, genetic merit expectations for commercial herds should be modeled using genetic lag expectations. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  9. Accurate monitoring developed by EDF for FA-3-EPRTM and UK-EPRTM: chemistry-radiochemistry design and procedures

    International Nuclear Information System (INIS)

    Tigeras, Arancha; Bouhrizi, Sofia; Pierre, Marine; L'Orphelin, Jean-Matthieu

    2012-09-01

    The monitoring of chemistry and radiochemistry parameters is a fundamental need in nuclear power plants in order to ensure: - The reactivity control in real time, - The barrier integrity surveillance by means of the fuel cladding failures detection and the primary-pressure boundary components control, - The water quality to limit the radiation build-up and the material corrosion permitting to prepare the maintenance, radioprotection and waste operations. - The efficiency of treatment systems and hence the minimization of chemical and radiochemical substances discharges The relevant chemistry and radiochemistry parameters to be monitored are selected depending on the chemistry conditioning of systems, the source term evaluations, the corrosion mechanisms and the radioactivity consequences. In spite of the difficulties for obtaining representative samples under all circumstances, the EPR M design provides the appropriate provisions and analytical procedures for ensuring the reliable and accurate monitoring of parameters in compliance with the specification requirements. The design solutions, adopted for Flamanville 3-EPR M and UK-EPR M , concerning the sampling conditions and locations, the on-line and analytical equipment, the procedures and the results transmission to control room and chemistry laboratory are supported by ALARP considerations, international experience and researches concerning the nuclides behavior (corrosion product and actinides solubility, fission product degassing, impurities and additives reactions also). This paper details the means developed by EDF for making successful and meaningful sampling and measurements to achieve the essential objectives associated with the monitoring. (authors)

  10. Methods for Efficiently and Accurately Computing Quantum Mechanical Free Energies for Enzyme Catalysis.

    Science.gov (United States)

    Kearns, F L; Hudson, P S; Boresch, S; Woodcock, H L

    2016-01-01

    Enzyme activity is inherently linked to free energies of transition states, ligand binding, protonation/deprotonation, etc.; these free energies, and thus enzyme function, can be affected by residue mutations, allosterically induced conformational changes, and much more. Therefore, being able to predict free energies associated with enzymatic processes is critical to understanding and predicting their function. Free energy simulation (FES) has historically been a computational challenge as it requires both the accurate description of inter- and intramolecular interactions and adequate sampling of all relevant conformational degrees of freedom. The hybrid quantum mechanical molecular mechanical (QM/MM) framework is the current tool of choice when accurate computations of macromolecular systems are essential. Unfortunately, robust and efficient approaches that employ the high levels of computational theory needed to accurately describe many reactive processes (ie, ab initio, DFT), while also including explicit solvation effects and accounting for extensive conformational sampling are essentially nonexistent. In this chapter, we will give a brief overview of two recently developed methods that mitigate several major challenges associated with QM/MM FES: the QM non-Boltzmann Bennett's acceptance ratio method and the QM nonequilibrium work method. We will also describe usage of these methods to calculate free energies associated with (1) relative properties and (2) along reaction paths, using simple test cases with relevance to enzymes examples. © 2016 Elsevier Inc. All rights reserved.

  11. Frequency of aggressive behaviors in a nationally representative sample of Iranian children and adolescents: The CASPIAN-IV study

    Directory of Open Access Journals (Sweden)

    Morteza Sadinejad

    2015-01-01

    Full Text Available Background: This study aims to explore the frequency of aggressive behaviors among a nationally representative sample of Iranian children and adolescents. Methods: This nationwide study was performed on a multi-stage sample of 6-18 years students, living in 30 provinces in Iran. Students were asked to confidentially report the frequency of aggressive behaviors including physical fighting, bullying and being bullied in the previous 12 months, using the questionnaire of the World Health Organization Global School Health Survey. Results: In this cross-sectional study, 13,486 students completed the study (90.6% participation rate; they consisted of 49.2% girls and 75.6% urban residents. The mean age of participants was 12.47 years (95% confidence interval: 12.29, 12.65. In total, physical fight was more prevalent among boys than girls (48% vs. 31%, P < 0.001. Higher rates of involvement in two other behaviors namely being bullied and bulling to other classmates had a higher frequency among boys compared to girls (29% vs. 25%, P < 0.001 for being bullied and (20% vs. 14%, P < 0.001 for bulling to others. Physical fighting was more prevalent among rural residents (40% vs. 39%, respectively, P = 0.61, while being bullied was more common among urban students (27% vs. 26%, respectively, P = 0.69. Conclusions: Although in this study the frequency of aggressive behaviors was lower than many other populations, still these findings emphasize on the importance of designing preventive interventions that target the students, especially in early adolescence, and to increase their awareness toward aggressive behaviors. Implications for future research and aggression prevention programming are recommended.

  12. Measurement of extremely (2) H-enriched water samples by laser spectrometry: application to batch electrolytic concentration of environmental tritium samples.

    Science.gov (United States)

    Wassenaar, L I; Kumar, B; Douence, C; Belachew, D L; Aggarwal, P K

    2016-02-15

    Natural water samples artificially or experimentally enriched in deuterium ((2) H) at concentrations up to 10,000 ppm are required for various medical, environmental and hydrological tracer applications, but are difficult to measure using conventional stable isotope ratio mass spectrometry. Here we demonstrate that off-axis integrated cavity output (OA-ICOS) laser spectrometry, along with (2) H-enriched laboratory calibration standards and appropriate analysis templates, allows for low-cost, fast, and accurate determinations of water samples having δ(2) HVSMOW-SLAP values up to at least 57,000 ‰ (~9000 ppm) at a processing rate of 60 samples per day. As one practical application, extremely (2) H-enriched samples were measured by laser spectrometry and compared to the traditional (3) H Spike-Proxy method in order to determine tritium enrichment factors in the batch electrolysis of environmental waters. Highly (2) H-enriched samples were taken from different sets of electrolytically concentrated standards and low-level (tritium samples, and all cases returned accurate and precise initial low-level (3) H results. The ability to quickly and accurately measure extremely (2) H-enriched waters by laser spectrometry will facilitate the use of deuterium as a tracer in numerous environmental and other applications. For low-level tritium operations, this new analytical ability facilitated a 10-20 % increase in sample productivity through the elimination of spike standards and gravimetrics, and provides immediate feedback on electrolytic enrichment cell performance. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  13. [Considering housing arrangements in elderly life: factors influencing plans concerning future housing arrangements and preferences in a representative sample of 45+ year olds].

    Science.gov (United States)

    Spangenberg, L; Glaesmer, H; Brähler, E; Kersting, A; Strauß, B

    2013-04-01

    Providing care and support for the elderly is a future challenge. Using regression analysis, a representative population-based sample (n = 1,445) was examined with respect to whether they had considered future housing and which variables influenced their thoughts and preferences. The majority of the sample reported thinking about housing in old age and preferred to stay at home in old age. Thoughts about future housing and housing preferences were predicted by different factors in the age groups analyzed. Thinking about future housing was positively associated with increasing age and depression. Other relevant predictors were gender, living with a partner, images of old age (especially negative ones), and anticipated subjective health. These variables also predicted housing preferences. Thoughts about future living arrangements are widespread, and their importance increases with age. The wishes reported do contrast to a certain extent with reality. Planning future care as well as developing consultation guidelines should address these issues while considering the reported influences.

  14. Marketing norm perception among medical representatives in Indian pharmaceutical industry.

    Science.gov (United States)

    Nagashekhara, Molugulu; Agil, Syed Omar Syed; Ramasamy, Ravindran

    2012-03-01

    Study of marketing norm perception among medical representatives is an under-portrayed component that deserves further perusal in the pharmaceutical industry. The purpose of this study is to find out the perception of marketing norms among medical representatives. The research design is quantitative and cross sectional study with medical representatives as unit of analysis. Data is collected from medical representatives (n=300) using a simple random and cluster sampling using a structured questionnaire. Results indicate that there is no difference in the perception of marketing norms among male and female medical representatives. But there is a difference in opinion among domestic and multinational company's medical representatives. Educational back ground of medical representatives also shows the difference in opinion among medical representatives. Degree holders and multinational company medical representatives have high perception of marketing norms compare to their counterparts. The researchers strongly believe that mandatory training on marketing norms is beneficial in decision making process during the dilemmas in the sales field.

  15. Evaluation of Respondent-Driven Sampling

    Science.gov (United States)

    McCreesh, Nicky; Frost, Simon; Seeley, Janet; Katongole, Joseph; Tarsh, Matilda Ndagire; Ndunguse, Richard; Jichi, Fatima; Lunel, Natasha L; Maher, Dermot; Johnston, Lisa G; Sonnenberg, Pam; Copas, Andrew J; Hayes, Richard J; White, Richard G

    2012-01-01

    Background Respondent-driven sampling is a novel variant of link-tracing sampling for estimating the characteristics of hard-to-reach groups, such as HIV prevalence in sex-workers. Despite its use by leading health organizations, the performance of this method in realistic situations is still largely unknown. We evaluated respondent-driven sampling by comparing estimates from a respondent-driven sampling survey with total-population data. Methods Total-population data on age, tribe, religion, socioeconomic status, sexual activity and HIV status were available on a population of 2402 male household-heads from an open cohort in rural Uganda. A respondent-driven sampling (RDS) survey was carried out in this population, employing current methods of sampling (RDS sample) and statistical inference (RDS estimates). Analyses were carried out for the full RDS sample and then repeated for the first 250 recruits (small sample). Results We recruited 927 household-heads. Full and small RDS samples were largely representative of the total population, but both samples under-represented men who were younger, of higher socioeconomic status, and with unknown sexual activity and HIV status. Respondent-driven-sampling statistical-inference methods failed to reduce these biases. Only 31%-37% (depending on method and sample size) of RDS estimates were closer to the true population proportions than the RDS sample proportions. Only 50%-74% of respondent-driven-sampling bootstrap 95% confidence intervals included the population proportion. Conclusions Respondent-driven sampling produced a generally representative sample of this well-connected non-hidden population. However, current respondent-driven-sampling inference methods failed to reduce bias when it occurred. Whether the data required to remove bias and measure precision can be collected in a respondent-driven sampling survey is unresolved. Respondent-driven sampling should be regarded as a (potentially superior) form of convenience-sampling

  16. Calculating a Continuous Metabolic Syndrome Score Using Nationally Representative Reference Values.

    Science.gov (United States)

    Guseman, Emily Hill; Eisenmann, Joey C; Laurson, Kelly R; Cook, Stephen R; Stratbucker, William

    2018-02-26

    The prevalence of metabolic syndrome in youth varies on the basis of the classification system used, prompting implementation of continuous scores; however, the use of these scores is limited to the sample from which they were derived. We sought to describe the derivation of the continuous metabolic syndrome score using nationally representative reference values in a sample of obese adolescents and a national sample obtained from National Health and Nutrition Examination Survey (NHANES) 2011-2012. Clinical data were collected from 50 adolescents seeking obesity treatment at a stage 3 weight management center. A second analysis relied on data from adolescents included in NHANES 2011-2012, performed for illustrative purposes. The continuous metabolic syndrome score was calculated by regressing individual values onto nationally representative age- and sex-specific standards (NHANES III). Resultant z scores were summed to create a total score. The final sample included 42 obese adolescents (15 male and 35 female subjects; mean age, 14.8 ± 1.9 years) and an additional 445 participants from NHANES 2011-2012. Among the clinical sample, the mean continuous metabolic syndrome score was 4.16 ± 4.30, while the NHANES sample mean was quite a bit lower, at -0.24 ± 2.8. We provide a method to calculate the continuous metabolic syndrome by comparing individual risk factor values to age- and sex-specific percentiles from a nationally representative sample. Copyright © 2018 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  17. Towards accurate emergency response behavior

    International Nuclear Information System (INIS)

    Sargent, T.O.

    1981-01-01

    Nuclear reactor operator emergency response behavior has persisted as a training problem through lack of information. The industry needs an accurate definition of operator behavior in adverse stress conditions, and training methods which will produce the desired behavior. Newly assembled information from fifty years of research into human behavior in both high and low stress provides a more accurate definition of appropriate operator response, and supports training methods which will produce the needed control room behavior. The research indicates that operator response in emergencies is divided into two modes, conditioned behavior and knowledge based behavior. Methods which assure accurate conditioned behavior, and provide for the recovery of knowledge based behavior, are described in detail

  18. Relationship between sleep characteristics and measures of body size and composition in a nationally-representative sample.

    Science.gov (United States)

    Xiao, Qian; Gu, Fangyi; Caporaso, Neil; Matthews, Charles E

    2016-01-01

    Short sleep has been linked to obesity. However, sleep is a multidimensional behavior that cannot be characterized solely by sleep duration. There is limited study that comprehensively examined different sleep characteristics in relation to obesity. We examined various aspects of sleep in relation to adiposity in 2005-2006 NHANES participants who were 18 or older and free of cardiovascular disease, cancer, emphysema, chronic bronchitis and depression ( N  = 3995). Sleep characteristics were self-reported, and included duration, overall quality, onset latency, fragmentation, daytime sleepiness, snoring, and sleep disorders. Body measurements included weight, height, waist circumference, and dual-energy X-ray absorptiometry measured fat mass. Snoring was associated with higher BMI (adjusted difference in kg/m 2 comparing snoring for 5+ nights/week with no snoring (95 % confidence interval), 1.85 (0.88, 2.83)), larger waist circumference (cm, 4.52 (2.29, 6.75)), higher percentage of body fat (%, 1.61 (0.84, 2.38)), and higher android/gynoid ratio (0.03 (0.01, 0.06)). The associations were independent of sleep duration and sleep quality, and cannot be explained by the existence of sleep disorders such as sleep apnea. Poor sleep quality (two or more problematic sleep conditions) and short sleep duration (body size and fat composition, although the effects were attenuated after snoring was adjusted. In a nationally representative sample of healthy US adults, snoring, short sleep, and poor sleep quality were associated with higher adiposity.

  19. CREPT-MCNP code for efficiency calibration of HPGe detectors with the representative point method.

    Science.gov (United States)

    Saegusa, Jun

    2008-01-01

    The representative point method for the efficiency calibration of volume samples has been previously proposed. For smoothly implementing the method, a calculation code named CREPT-MCNP has been developed. The code estimates the position of a representative point which is intrinsic to each shape of volume sample. The self-absorption correction factors are also given to make correction on the efficiencies measured at the representative point with a standard point source. Features of the CREPT-MCNP code are presented.

  20. Soil sampling

    International Nuclear Information System (INIS)

    Fortunati, G.U.; Banfi, C.; Pasturenzi, M.

    1994-01-01

    This study attempts to survey the problems associated with techniques and strategies of soil sampling. Keeping in mind the well defined objectives of a sampling campaign, the aim was to highlight the most important aspect of representativeness of samples as a function of the available resources. Particular emphasis was given to the techniques and particularly to a description of the many types of samplers which are in use. The procedures and techniques employed during the investigations following the Seveso accident are described. (orig.)

  1. Accurate Delayed Matching-to-Sample Responding without Rehearsal: An Unintentional Demonstration with Children

    Science.gov (United States)

    Ratkos, Thom; Frieder, Jessica E.; Poling, Alan

    2016-01-01

    Research on joint control has focused on mediational responses, in which simultaneous stimulus control from two sources leads to the emission of a single response, such as choosing a comparison stimulus in delayed matching-to-sample. Most recent studies of joint control examined the role of verbal mediators (i.e., rehearsal) in evoking accurate…

  2. Dual-view inverted selective plane illumination microscopy (diSPIM) with improved background rejection for accurate 3D digital pathology

    Science.gov (United States)

    Hu, Bihe; Bolus, Daniel; Brown, J. Quincy

    2018-02-01

    Current gold-standard histopathology for cancerous biopsies is destructive, time consuming, and limited to 2D slices, which do not faithfully represent true 3D tumor micro-morphology. Light sheet microscopy has emerged as a powerful tool for 3D imaging of cancer biospecimens. Here, we utilize the versatile dual-view inverted selective plane illumination microscopy (diSPIM) to render digital histological images of cancer biopsies. Dual-view architecture enabled more isotropic resolution in X, Y, and Z; and different imaging modes, such as adding electronic confocal slit detection (eCSD) or structured illumination (SI), can be used to improve degraded image quality caused by background signal of large, scattering samples. To obtain traditional H&E-like images, we used DRAQ5 and eosin (D&E) staining, with 488nm and 647nm laser illumination, and multi-band filter sets. Here, phantom beads and a D&E stained buccal cell sample have been used to verify our dual-view method. We also show that via dual view imaging and deconvolution, more isotropic resolution has been achieved for optical cleared human prostate sample, providing more accurate quantitation of 3D tumor architecture than was possible with single-view SPIM methods. We demonstrate that the optimized diSPIM delivers more precise analysis of 3D cancer microarchitecture in human prostate biopsy than simpler light sheet microscopy arrangements.

  3. Atmospheric parameters and magnesium and calcium NLTE abundances for a sample of 16 ultra metal-poor stars

    Science.gov (United States)

    Sitnova, Tatyana; Mashonkina, Lyudmila; Ezzeddine, Rana; Frebel, Anna

    2018-06-01

    The most metal-poor stars provide important observational clues to the astrophysical objects that enriched the primordial gas with heavy elements. Accurate atmospheric parameters is a prerequisite of determination of accurate abundances. We present atmospheric parameters and abundances of calcium and magnesium for a sample of 16 ultra-metal poor (UMP) stars. In spectra of UMP stars, iron is represented only by lines of Fe I, while calcium is represented with lines of Ca I and Ca II, which can be used for determination/checking of effective temperature and surface gravity. Accurate calculations of synthetic spectra of UMP stars require non-local thermodynamic equilibrium (NLTE) treatment of line formation, since deviations from LTE grow with metallicity decreasing. The method of atmospheric parameter determination is based on NLTE analysis of lines of Ca I and Ca II, multi-band photometry, and isochrones. The method was tested in advance with the ultra metal-poor giant CD-38 245, where, in addition, trigonometric parallax measurements from Gaia DR1 and lines of Fe I and Fe II are available. Using photometric Teff = 4900 K and distance based log g = 2.0 for CD-38 245, we derived consistent within error bars NLTE abundances from Fe I and Fe II and Ca I and Ca II, while LTE leads to a discrepancy of 0.6 dex between Ca I and Ca II. We determined NLTE and LTE abundances of magnesium and calcium in 16 stars of the sample. For the majority of stars, as expected, [Ca/Mg] NLTE abundance ratios are close to 0, while LTE leads to systematically higher [Ca/Mg], by up to 0.3 dex, and larger spread of [Ca/Mg] for different stars. Three stars of our sample are strongly enhanced in magnesium, with [Mg/Ca] of 1.3 dex. It is worth noting that, for these three stars, we got very similar [Mg/Ca] of 1.30, 1.45, and 1.29, in contrast to the data from the literature, where, for the same stars, [Mg/Ca] vary from 0.7 to 1.4. Very similar [Mg/Ca] abundance ratios of these stars argue that

  4. Stratified Sampling to Define Levels of Petrographic Variation in Coal Beds: Examples from Indonesia and New Zealand

    Directory of Open Access Journals (Sweden)

    Tim A. Moore

    2016-01-01

    Full Text Available DOI: 10.17014/ijog.3.1.29-51Stratified sampling of coal seams for petrographic analysis using block samples is a viable alternative to standard methods of channel sampling and particulate pellet mounts. Although petrographic analysis of particulate pellets is employed widely, it is both time consuming and does not allow variation within sampling units to be assessed - an important measure in any study whether it be for paleoenvironmental reconstruction or in obtaining estimates of industrial attributes. Also, samples taken as intact blocks provide additional information, such as texture and botanical affinity that cannot be gained using particulate pellets. Stratified sampling can be employed both on ‘fine’ and ‘coarse’ grained coal units. Fine-grained coals are defined as those coal intervals that do not contain vitrain bands greater than approximately 1 mm in thickness (as measured perpendicular to bedding. In fine-grained coal seams, a reasonable sized block sample (with a polished surface area of ~3 cm2 can be taken that encapsulates the macroscopic variability. However, for coarse-grained coals (vitrain bands >1 mm a different system has to be employed in order to accurately account for the larger particles. Macroscopic point counting of vitrain bands can accurately account for those particles>1 mm within a coal interval. This point counting method is conducted using something as simple as string on a coal face with marked intervals greater than the largest particle expected to be encountered (although new technologies are being developed to capture this type of information digitally. Comparative analyses of particulate pellets and blocks on the same interval show less than 6% variation between the two sample types when blocks are recalculated to include macroscopic counts of vitrain. Therefore even in coarse-grained coals, stratified sampling can be used effectively and representatively.

  5. Sampling Strategies and Processing of Biobank Tissue Samples from Porcine Biomedical Models.

    Science.gov (United States)

    Blutke, Andreas; Wanke, Rüdiger

    2018-03-06

    In translational medical research, porcine models have steadily become more popular. Considering the high value of individual animals, particularly of genetically modified pig models, and the often-limited number of available animals of these models, establishment of (biobank) collections of adequately processed tissue samples suited for a broad spectrum of subsequent analyses methods, including analyses not specified at the time point of sampling, represent meaningful approaches to take full advantage of the translational value of the model. With respect to the peculiarities of porcine anatomy, comprehensive guidelines have recently been established for standardized generation of representative, high-quality samples from different porcine organs and tissues. These guidelines are essential prerequisites for the reproducibility of results and their comparability between different studies and investigators. The recording of basic data, such as organ weights and volumes, the determination of the sampling locations and of the numbers of tissue samples to be generated, as well as their orientation, size, processing and trimming directions, are relevant factors determining the generalizability and usability of the specimen for molecular, qualitative, and quantitative morphological analyses. Here, an illustrative, practical, step-by-step demonstration of the most important techniques for generation of representative, multi-purpose biobank specimen from porcine tissues is presented. The methods described here include determination of organ/tissue volumes and densities, the application of a volume-weighted systematic random sampling procedure for parenchymal organs by point-counting, determination of the extent of tissue shrinkage related to histological embedding of samples, and generation of randomly oriented samples for quantitative stereological analyses, such as isotropic uniform random (IUR) sections generated by the "Orientator" and "Isector" methods, and vertical

  6. Limited Sampling Strategy for Accurate Prediction of Pharmacokinetics of Saroglitazar: A 3-point Linear Regression Model Development and Successful Prediction of Human Exposure.

    Science.gov (United States)

    Joshi, Shuchi N; Srinivas, Nuggehally R; Parmar, Deven V

    2018-03-01

    Our aim was to develop and validate the extrapolative performance of a regression model using a limited sampling strategy for accurate estimation of the area under the plasma concentration versus time curve for saroglitazar. Healthy subject pharmacokinetic data from a well-powered food-effect study (fasted vs fed treatments; n = 50) was used in this work. The first 25 subjects' serial plasma concentration data up to 72 hours and corresponding AUC 0-t (ie, 72 hours) from the fasting group comprised a training dataset to develop the limited sampling model. The internal datasets for prediction included the remaining 25 subjects from the fasting group and all 50 subjects from the fed condition of the same study. The external datasets included pharmacokinetic data for saroglitazar from previous single-dose clinical studies. Limited sampling models were composed of 1-, 2-, and 3-concentration-time points' correlation with AUC 0-t of saroglitazar. Only models with regression coefficients (R 2 ) >0.90 were screened for further evaluation. The best R 2 model was validated for its utility based on mean prediction error, mean absolute prediction error, and root mean square error. Both correlations between predicted and observed AUC 0-t of saroglitazar and verification of precision and bias using Bland-Altman plot were carried out. None of the evaluated 1- and 2-concentration-time points models achieved R 2 > 0.90. Among the various 3-concentration-time points models, only 4 equations passed the predefined criterion of R 2 > 0.90. Limited sampling models with time points 0.5, 2, and 8 hours (R 2 = 0.9323) and 0.75, 2, and 8 hours (R 2 = 0.9375) were validated. Mean prediction error, mean absolute prediction error, and root mean square error were prediction of saroglitazar. The same models, when applied to the AUC 0-t prediction of saroglitazar sulfoxide, showed mean prediction error, mean absolute prediction error, and root mean square error model predicts the exposure of

  7. On Optimal, Minimal BRDF Sampling for Reflectance Acquisition

    DEFF Research Database (Denmark)

    Nielsen, Jannik Boll; Jensen, Henrik Wann; Ramamoorthi, Ravi

    2015-01-01

    The bidirectional reflectance distribution function (BRDF) is critical for rendering, and accurate material representation requires data-driven reflectance models. However, isotropic BRDFs are 3D functions, and measuring the reflectance of a flat sample can require a million incident and outgoing...... direction pairs, making the use of measured BRDFs impractical. In this paper, we address the problem of reconstructing a measured BRDF from a limited number of samples. We present a novel mapping of the BRDF space, allowing for extraction of descriptive principal components from measured databases......, such as the MERL BRDF database. We optimize for the best sampling directions, and explicitly provide the optimal set of incident and outgoing directions in the Rusinkiewicz parameterization for n = {1, 2, 5, 10, 20} samples. Based on the principal components, we describe a method for accurately reconstructing BRDF...

  8. Rapid Classification and Identification of Multiple Microorganisms with Accurate Statistical Significance via High-Resolution Tandem Mass Spectrometry.

    Science.gov (United States)

    Alves, Gelio; Wang, Guanghui; Ogurtsov, Aleksey Y; Drake, Steven K; Gucek, Marjan; Sacks, David B; Yu, Yi-Kuo

    2018-06-05

    Rapid and accurate identification and classification of microorganisms is of paramount importance to public health and safety. With the advance of mass spectrometry (MS) technology, the speed of identification can be greatly improved. However, the increasing number of microbes sequenced is complicating correct microbial identification even in a simple sample due to the large number of candidates present. To properly untwine candidate microbes in samples containing one or more microbes, one needs to go beyond apparent morphology or simple "fingerprinting"; to correctly prioritize the candidate microbes, one needs to have accurate statistical significance in microbial identification. We meet these challenges by using peptide-centric representations of microbes to better separate them and by augmenting our earlier analysis method that yields accurate statistical significance. Here, we present an updated analysis workflow that uses tandem MS (MS/MS) spectra for microbial identification or classification. We have demonstrated, using 226 MS/MS publicly available data files (each containing from 2500 to nearly 100,000 MS/MS spectra) and 4000 additional MS/MS data files, that the updated workflow can correctly identify multiple microbes at the genus and often the species level for samples containing more than one microbe. We have also shown that the proposed workflow computes accurate statistical significances, i.e., E values for identified peptides and unified E values for identified microbes. Our updated analysis workflow MiCId, a freely available software for Microorganism Classification and Identification, is available for download at https://www.ncbi.nlm.nih.gov/CBBresearch/Yu/downloads.html . Graphical Abstract ᅟ.

  9. Parent-Child Connectedness and Long-Term Risk for Suicidal Ideation in a Nationally Representative Sample of US Adolescents.

    Science.gov (United States)

    Kuramoto-Crawford, S Janet; Ali, Mir M; Wilcox, Holly C

    2017-09-01

    Few studies have addressed on the role of parent-child connectedness (PCC) on adolescents' risk for suicidal ideation from a longitudinal, developmental perspective. This study examined PCC during adolescence and risk of suicidal ideation into adulthood among a nationally representative sample of American adolescents. The study includes 13,234 adolescents aged 11-18 from the National Longitudinal Study of Adolescent to Adult Health (Add Health) who were surveyed during adolescence (1994-1995) and then again in early adulthood (2008-2009). Multinomial logistic regression estimated the association between PCC during adolescence and having ideation during the adolescence period only, in adulthood only, and in both adolescence and adulthood as compared with those without suicidal ideation. After adjusting for depressive symptoms and other parent and adolescent characteristics, adolescents in two-parent households who reported higher PCC during adolescence had lower relative risk of having ideation during adolescence alone and in both adolescence and adulthood. In mother-only households, higher mother connectedness was also associated with decreased risk of having adolescent ideation. PCC is an important modifiable target for the prevention of suicidal ideation from adolescence into adulthood.

  10. Independent assessment of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) sample preparation quality: Effect of sample preparation on MALDI-MS of synthetic polymers.

    Science.gov (United States)

    Kooijman, Pieter C; Kok, Sander; Honing, Maarten

    2017-02-28

    Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) provides detailed and in-depth information about the molecular characteristics of synthetic polymers. To obtain the most accurate results the sample preparation parameters should be chosen to suit the sample and the aim of the experiment. Because the underlying principles of MALDI are still not fully known, a priori determination of optimal sample preparation protocols is often not possible. Employing an automated sample preparation quality assessment method recently presented by us we quantified the sample preparation quality obtained using various sample preparation protocols. Six conventional matrices with and without added potassium as a cationization agent and six ionic liquid matrices (ILMs) were assessed using poly(ethylene glycol) (PEG), polytetrahydrofuran (PTHF) and poly(methyl methacrylate) (PMMA) as samples. All sample preparation protocols were scored and ranked based on predefined quality parameters and spot-to-spot repeatability. Clearly distinctive preferences were observed in matrix identity and cationization agent for PEG, PTHF and PMMA, as the addition of an excess of potassium cationization agent results in an increased score for PMMA and a contrasting matrix-dependent effect for PTHF and PEG. The addition of excess cationization agent to sample mixtures dissipates any overrepresentation of high molecular weight polymer species. Our results show reduced ionization efficiency and similar sample deposit homogeneity for all tested ILMs, compared with well-performing conventional MALDI matrices. The results published here represent a start in the unsupervised quantification of sample preparation quality for MALDI samples. This method can select the best sample preparation parameters for any synthetic polymer sample and the results can be used to formulate hypotheses on MALDI principles. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  11. Developing Water Sampling Standards

    Science.gov (United States)

    Environmental Science and Technology, 1974

    1974-01-01

    Participants in the D-19 symposium on aquatic sampling and measurement for water pollution assessment were informed that determining the extent of waste water stream pollution is not a cut and dry procedure. Topics discussed include field sampling, representative sampling from storm sewers, suggested sampler features and application of improved…

  12. Does universal 16S rRNA gene amplicon sequencing of environmental communities provide an accurate description of nitrifying guilds?

    DEFF Research Database (Denmark)

    Diwan, Vaibhav; Albrechtsen, Hans-Jørgen; Smets, Barth F.

    2018-01-01

    amplicon sequencing and from guild targeted approaches. The universal amplicon sequencing provided 1) accurate estimates of nitrifier composition, 2) clustering of the samples based on these compositions consistent with sample origin, 3) estimates of the relative abundance of the guilds correlated...

  13. Canadian consumer issues in accurate and fair electricity metering

    International Nuclear Information System (INIS)

    2000-07-01

    The Public Interest Advocacy Centre (PIAC), located in Ottawa, participates in regulatory proceedings concerning electricity and natural gas to support public and consumer interest. PIAC provides legal representation, research and policy support and public advocacy. A study aimed toward the determination of the issues at stake for residential electricity consumers in the provision of fair and accurate electricity metering, was commissioned by Measurement Canada in consultation with Industry Canada's Consumer Affairs. The metering of electricity must be carried out in a fair and efficient manner for all residential consumers. The Electricity, Gas and Inspection Act was developed to ensure compliance with standards for measuring instrumentation. The accurate metering of electricity through the distribution systems for electricity in Canada represents the main focus of this study and report. The role played by Measurement Canada and the increased efficiencies of service delivery by Measurement Canada or the changing of electricity market conditions are of special interest. The role of Measurement Canada was explained, as were the concerns of residential consumers. A comparison was then made between the interests of residential consumers and those of commercial and industrial electricity consumers in electricity metering. Selected American and Commonwealth jurisdictions were reviewed in light of their electricity metering practices. A section on compliance and conflict resolution was included, in addition to a section on the use of voluntary codes for compliance and conflict resolution

  14. Improved Patient Size Estimates for Accurate Dose Calculations in Abdomen Computed Tomography

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang-Lae [Yonsei University, Wonju (Korea, Republic of)

    2017-07-15

    The radiation dose of CT (computed tomography) is generally represented by the CTDI (CT dose index). CTDI, however, does not accurately predict the actual patient doses for different human body sizes because it relies on a cylinder-shaped head (diameter : 16 cm) and body (diameter : 32 cm) phantom. The purpose of this study was to eliminate the drawbacks of the conventional CTDI and to provide more accurate radiation dose information. Projection radiographs were obtained from water cylinder phantoms of various sizes, and the sizes of the water cylinder phantoms were calculated and verified using attenuation profiles. The effective diameter was also calculated using the attenuation of the abdominal projection radiographs of 10 patients. When the results of the attenuation-based method and the geometry-based method shown were compared with the results of the reconstructed-axial-CT-image-based method, the effective diameter of the attenuation-based method was found to be similar to the effective diameter of the reconstructed-axial-CT-image-based method, with a difference of less than 3.8%, but the geometry-based method showed a difference of less than 11.4%. This paper proposes a new method of accurately computing the radiation dose of CT based on the patient sizes. This method computes and provides the exact patient dose before the CT scan, and can therefore be effectively used for imaging and dose control.

  15. Reconstructing the temporal ordering of biological samples using microarray data.

    Science.gov (United States)

    Magwene, Paul M; Lizardi, Paul; Kim, Junhyong

    2003-05-01

    Accurate time series for biological processes are difficult to estimate due to problems of synchronization, temporal sampling and rate heterogeneity. Methods are needed that can utilize multi-dimensional data, such as those resulting from DNA microarray experiments, in order to reconstruct time series from unordered or poorly ordered sets of observations. We present a set of algorithms for estimating temporal orderings from unordered sets of sample elements. The techniques we describe are based on modifications of a minimum-spanning tree calculated from a weighted, undirected graph. We demonstrate the efficacy of our approach by applying these techniques to an artificial data set as well as several gene expression data sets derived from DNA microarray experiments. In addition to estimating orderings, the techniques we describe also provide useful heuristics for assessing relevant properties of sample datasets such as noise and sampling intensity, and we show how a data structure called a PQ-tree can be used to represent uncertainty in a reconstructed ordering. Academic implementations of the ordering algorithms are available as source code (in the programming language Python) on our web site, along with documentation on their use. The artificial 'jelly roll' data set upon which the algorithm was tested is also available from this web site. The publicly available gene expression data may be found at http://genome-www.stanford.edu/cellcycle/ and http://caulobacter.stanford.edu/CellCycle/.

  16. Vapor and gas sampling of single-shell tank 241-B-102 using the in situ vapor sampling system

    International Nuclear Information System (INIS)

    Lockrem, L.L.

    1997-01-01

    The Vapor Issue Resolution Program tasked the Vapor Team (the team) to collect representative headspace samples from Hanford Site single-shell tank (SST) 241-B-102. This document presents sampling data resulting from the April 18, 1996 sampling of SST 241-B-102. Analytical results will be presented in a separate report issued by Pacific Northwest National Laboratory (PNNL), which supplied and analyzed the sampling media. The team, consisting of Sampling and Mobile Laboratories (SML) and Special Analytical Studies (SAS) personnel, used the vapor sampling system (VSS) to collect representative samples of the air, gases, and vapors from the headspace of SST 241-B-102 with sorbent traps and SUMMA canisters

  17. Explicitly represented polygon wall boundary model for the explicit MPS method

    Science.gov (United States)

    Mitsume, Naoto; Yoshimura, Shinobu; Murotani, Kohei; Yamada, Tomonori

    2015-05-01

    This study presents an accurate and robust boundary model, the explicitly represented polygon (ERP) wall boundary model, to treat arbitrarily shaped wall boundaries in the explicit moving particle simulation (E-MPS) method, which is a mesh-free particle method for strong form partial differential equations. The ERP model expresses wall boundaries as polygons, which are explicitly represented without using the distance function. These are derived so that for viscous fluids, and with less computational cost, they satisfy the Neumann boundary condition for the pressure and the slip/no-slip condition on the wall surface. The proposed model is verified and validated by comparing computed results with the theoretical solution, results obtained by other models, and experimental results. Two simulations with complex boundary movements are conducted to demonstrate the applicability of the E-MPS method to the ERP model.

  18. Flight Vehicle Control and Aerobiological Sampling Applications

    OpenAIRE

    Techy, Laszlo

    2009-01-01

    Aerobiological sampling using unmanned aerial vehicles (UAVs) is an exciting research field blending various scientific and engineering disciplines. The biological data collected using UAVs helps to better understand the atmospheric transport of microorganisms. Autopilot-equipped UAVs can accurately sample along pre-defined flight plans and precisely regulated altitudes. They can provide even greater utility when they are networked together in coordinated sampling missions: such measurements ...

  19. Teknik Sampling Snowball dalam Penelitian Lapangan

    OpenAIRE

    Nina Nurdiani

    2014-01-01

    Field research can be associated with both qualitative and quantitative research methods, depending on the problems faced and the goals to be achieved. The success of data collection in the field research depends on the determination of the appropriate sampling technique, to obtain accurate data, and reliably. In studies that have problems related to specific issues, requiring a non-probability sampling techniques one of which is the snowball sampling technique. This technique is useful for f...

  20. Getting DNA copy numbers without control samples.

    Science.gov (United States)

    Ortiz-Estevez, Maria; Aramburu, Ander; Rubio, Angel

    2012-08-16

    The selection of the reference to scale the data in a copy number analysis has paramount importance to achieve accurate estimates. Usually this reference is generated using control samples included in the study. However, these control samples are not always available and in these cases, an artificial reference must be created. A proper generation of this signal is crucial in terms of both noise and bias.We propose NSA (Normality Search Algorithm), a scaling method that works with and without control samples. It is based on the assumption that genomic regions enriched in SNPs with identical copy numbers in both alleles are likely to be normal. These normal regions are predicted for each sample individually and used to calculate the final reference signal. NSA can be applied to any CN data regardless the microarray technology and preprocessing method. It also finds an optimal weighting of the samples minimizing possible batch effects. Five human datasets (a subset of HapMap samples, Glioblastoma Multiforme (GBM), Ovarian, Prostate and Lung Cancer experiments) have been analyzed. It is shown that using only tumoral samples, NSA is able to remove the bias in the copy number estimation, to reduce the noise and therefore, to increase the ability to detect copy number aberrations (CNAs). These improvements allow NSA to also detect recurrent aberrations more accurately than other state of the art methods. NSA provides a robust and accurate reference for scaling probe signals data to CN values without the need of control samples. It minimizes the problems of bias, noise and batch effects in the estimation of CNs. Therefore, NSA scaling approach helps to better detect recurrent CNAs than current methods. The automatic selection of references makes it useful to perform bulk analysis of many GEO or ArrayExpress experiments without the need of developing a parser to find the normal samples or possible batches within the data. The method is available in the open-source R package

  1. Trends of VOC exposures among a nationally representative sample: Analysis of the NHANES 1988 through 2004 data sets

    Science.gov (United States)

    Su, Feng-Chiao; Mukherjee, Bhramar; Batterman, Stuart

    2011-09-01

    Exposures to volatile organic compounds (VOCs) are ubiquitous due to emissions from personal, commercial and industrial products, but quantitative and representative information regarding long term exposure trends is lacking. This study characterizes trends from 1988 to 2004 for the 15 VOCs measured in blood in five cohorts of the National Health and Nutrition Examination Survey (NHANES), a large and representative sample of U.S. adults. Trends were evaluated at various percentiles using linear quantile regression (QR) models, which were adjusted for solvent-related occupations and cotinine levels. Most VOCs showed decreasing trends at all quantiles, e.g., median exposures declined by 2.5 (m,p-xylene) to 6.4 (tetrachloroethene) percent per year over the 15 year period. Trends varied by VOC and quantile, and were grouped into three patterns: similar decreases at all quantiles (including benzene, toluene); most rapid decreases at upper quantiles (ethylbenzene, m,p-xylene, o-xylene, styrene, chloroform, tetrachloroethene); and fastest declines at central quantiles (1,4-dichlorobenzene). These patterns reflect changes in exposure sources, e.g., upper-percentile exposures may result mostly from occupational exposure, while lower percentile exposures arise from general environmental sources. Both VOC emissions aggregated at the national level and VOC concentrations measured in ambient air also have declined substantially over the study period and are supportive of the exposure trends, although the NHANES data suggest the importance of indoor sources and personal activities on VOC exposures. While piecewise QR models suggest that exposures of several VOCs decreased little or any during the 1990's, followed by more rapid decreases from 1999 to 2004, questions are raised concerning the reliability of VOC data in several of the NHANES cohorts and its applicability as an exposure indicator, as demonstrated by the modest correlation between VOC levels in blood and personal air

  2. Accurate expansion of cylindrical paraxial waves for its straightforward implementation in electromagnetic scattering

    International Nuclear Information System (INIS)

    Naserpour, Mahin; Zapata-Rodríguez, Carlos J.

    2018-01-01

    Highlights: • Paraxial beams are represented in a series expansion in terms of Bessel wave functions. • The coefficients of the series expansion can be analytically determined by using the pattern in the focal plane. • In particular, Gaussian beams and apertured wave fields have been critically examined. • This representation of the wave field is adequate for scattering problems with shaped beams. - Abstract: The evaluation of vector wave fields can be accurately performed by means of diffraction integrals, differential equations and also series expansions. In this paper, a Bessel series expansion which basis relies on the exact solution of the Helmholtz equation in cylindrical coordinates is theoretically developed for the straightforward yet accurate description of low-numerical-aperture focal waves. The validity of this approach is confirmed by explicit application to Gaussian beams and apertured focused fields in the paraxial regime. Finally we discuss how our procedure can be favorably implemented in scattering problems.

  3. Accurate and robust brain image alignment using boundary-based registration.

    Science.gov (United States)

    Greve, Douglas N; Fischl, Bruce

    2009-10-15

    The fine spatial scales of the structures in the human brain represent an enormous challenge to the successful integration of information from different images for both within- and between-subject analysis. While many algorithms to register image pairs from the same subject exist, visual inspection shows that their accuracy and robustness to be suspect, particularly when there are strong intensity gradients and/or only part of the brain is imaged. This paper introduces a new algorithm called Boundary-Based Registration, or BBR. The novelty of BBR is that it treats the two images very differently. The reference image must be of sufficient resolution and quality to extract surfaces that separate tissue types. The input image is then aligned to the reference by maximizing the intensity gradient across tissue boundaries. Several lower quality images can be aligned through their alignment with the reference. Visual inspection and fMRI results show that BBR is more accurate than correlation ratio or normalized mutual information and is considerably more robust to even strong intensity inhomogeneities. BBR also excels at aligning partial-brain images to whole-brain images, a domain in which existing registration algorithms frequently fail. Even in the limit of registering a single slice, we show the BBR results to be robust and accurate.

  4. A population-based nested case control study on recurrent pneumonias in children with severe generalized cerebral palsy: ethical considerations of the design and representativeness of the study sample

    Directory of Open Access Journals (Sweden)

    Benninga Marc A

    2005-07-01

    Full Text Available Abstract Background In children with severe generalized cerebral palsy, pneumonias are a major health issue. Malnutrition, dysphagia, gastro-oesophageal reflux, impaired respiratory function and constipation are hypothesized risk factors. Still, no data are available on the relative contribution of these possible risk factors in the described population. This paper describes the initiation of a study in 194 children with severe generalized cerebral palsy, on the prevalence and on the impact of these hypothesized risk factors of recurrent pneumonias. Methods/Design A nested case-control design with 18 months follow-up was chosen. Dysphagia, respiratory function and constipation will be assessed at baseline, malnutrition and gastro-oesophageal reflux at the end of the follow-up. The study population consists of a representative population sample of children with severe generalized cerebral palsy. Inclusion was done through care-centres in a predefined geographical area and not through hospitals. All measurements will be done on-site which sets high demands on all measurements. If these demands were not met in "gold standard" methods, other methods were chosen. Although the inclusion period was prolonged, the desired sample size of 300 children was not met. With a consent rate of 33%, nearly 10% of all eligible children in the Netherlands are included (n = 194. The study population is subtly different from the non-participants with regard to severity of dysphagia and prevalence rates of pneumonias and gastro-oesophageal reflux. Discussion Ethical issues complicated the study design. Assessment of malnutrition and gastro-oesophageal reflux at baseline was considered unethical, since these conditions can be easily treated. Therefore, we postponed these diagnostics until the end of the follow-up. In order to include a representative sample, all eligible children in a predefined geographical area had to be contacted. To increase the consent rate, on

  5. The use of indicator taxa as representatives of communities in bioassessment

    NARCIS (Netherlands)

    Nijboer, R.C.; Verdonschot, P.F.M.; Werf, van der D.C.

    2005-01-01

    1. Sampling and processing of benthic macroinvertebrate samples is time consuming and expensive. Although a number of cost-cutting options exist, a frequently asked question is how representative a subset of data is of the whole community, in particular in areas where habitat diversity is high (like

  6. Microfabricated Devices for Sample Extraction, Concentrations, and Related Sample Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Gang; Lin, Yuehe

    2006-12-01

    This is an invited book chapter. As with other analytical techniques, sample pretreatments, sample extraction, sample introduction, and related techniques are of extreme importance for micro-electro-mechanical systems (MEMS). Bio-MEMS devices and systems start with a sampling step. The biological sample then usually undergoes some kinds of sample preparation steps before the actual analysis. These steps may involve extracting the target sample from its matrix, removing interferences from the sample, derivatizing the sample to detectable species, or performing a sample preconcentration step. The integration of the components for sample pretreatment into microfluidic devices represents one of the remaining the bottle-neck towards achieving true miniaturized total analysis systems (?TAS). This chapter provides a thorough state-of-art of the developments in this field to date.

  7. Technical note: Instantaneous sampling intervals validated from continuous video observation for behavioral recording of feedlot lambs.

    Science.gov (United States)

    Pullin, A N; Pairis-Garcia, M D; Campbell, B J; Campler, M R; Proudfoot, K L

    2017-11-01

    When considering methodologies for collecting behavioral data, continuous sampling provides the most complete and accurate data set whereas instantaneous sampling can provide similar results and also increase the efficiency of data collection. However, instantaneous time intervals require validation to ensure accurate estimation of the data. Therefore, the objective of this study was to validate scan sampling intervals for lambs housed in a feedlot environment. Feeding, lying, standing, drinking, locomotion, and oral manipulation were measured on 18 crossbred lambs housed in an indoor feedlot facility for 14 h (0600-2000 h). Data from continuous sampling were compared with data from instantaneous scan sampling intervals of 5, 10, 15, and 20 min using a linear regression analysis. Three criteria determined if a time interval accurately estimated behaviors: 1) ≥ 0.90, 2) slope not statistically different from 1 ( > 0.05), and 3) intercept not statistically different from 0 ( > 0.05). Estimations for lying behavior were accurate up to 20-min intervals, whereas feeding and standing behaviors were accurate only at 5-min intervals (i.e., met all 3 regression criteria). Drinking, locomotion, and oral manipulation demonstrated poor associations () for all tested intervals. The results from this study suggest that a 5-min instantaneous sampling interval will accurately estimate lying, feeding, and standing behaviors for lambs housed in a feedlot, whereas continuous sampling is recommended for the remaining behaviors. This methodology will contribute toward the efficiency, accuracy, and transparency of future behavioral data collection in lamb behavior research.

  8. Accurate episomal HIV 2-LTR circles quantification using optimized DNA isolation and droplet digital PCR.

    Science.gov (United States)

    Malatinkova, Eva; Kiselinova, Maja; Bonczkowski, Pawel; Trypsteen, Wim; Messiaen, Peter; Vermeire, Jolien; Verhasselt, Bruno; Vervisch, Karen; Vandekerckhove, Linos; De Spiegelaere, Ward

    2014-01-01

    In HIV-infected patients on combination antiretroviral therapy (cART), the detection of episomal HIV 2-LTR circles is a potential marker for ongoing viral replication. Quantification of 2-LTR circles is based on quantitative PCR or more recently on digital PCR assessment, but is hampered due to its low abundance. Sample pre-PCR processing is a critical step for 2-LTR circles quantification, which has not yet been sufficiently evaluated in patient derived samples. We compared two sample processing procedures to more accurately quantify 2-LTR circles using droplet digital PCR (ddPCR). Episomal HIV 2-LTR circles were either isolated by genomic DNA isolation or by a modified plasmid DNA isolation, to separate the small episomal circular DNA from chromosomal DNA. This was performed in a dilution series of HIV-infected cells and HIV-1 infected patient derived samples (n=59). Samples for the plasmid DNA isolation method were spiked with an internal control plasmid. Genomic DNA isolation enables robust 2-LTR circles quantification. However, in the lower ranges of detection, PCR inhibition caused by high genomic DNA load substantially limits the amount of sample input and this impacts sensitivity and accuracy. Moreover, total genomic DNA isolation resulted in a lower recovery of 2-LTR templates per isolate, further reducing its sensitivity. The modified plasmid DNA isolation with a spiked reference for normalization was more accurate in these low ranges compared to genomic DNA isolation. A linear correlation of both methods was observed in the dilution series (R2=0.974) and in the patient derived samples with 2-LTR numbers above 10 copies per million peripheral blood mononuclear cells (PBMCs), (R2=0.671). Furthermore, Bland-Altman analysis revealed an average agreement between the methods within the 27 samples in which 2-LTR circles were detectable with both methods (bias: 0.3875±1.2657 log10). 2-LTR circles quantification in HIV-infected patients proved to be more

  9. Water sampling device for fuel rod failure monitoring

    International Nuclear Information System (INIS)

    Oogami, Hideaki; Echigoya, Hironori; Matsuoka, Tesshi.

    1991-01-01

    The device of the present invention accurately samples coolants in a channel box as sampling water even if the upper end of the channel box of a fuel assembly is positioned at the same height or lower than the upper end of an upper lattice plate. An existent device comprises an outer cap, an inner cap, an air supply pipe and a water sampling tube. In addition, the device of the present invention comprises a sealing material disposed at the end of the outer cap for keeping liquid sealing with the upper lattice plate and a water level monitoring pipe extended to lower than the inner cap passing through the liquid sealing of the outer cap for sucking the atmosphere in the outer cap. Pressurized air is sent through the air supply pipe, to lower the water level of the coolants in the outer cap and the water level monitoring pipe sucks the pressurized air, by which the inside and the outside of the channel box are partitioned. Subsequently, if the sample water is sampled by a sampling tube, sampling water which enables accurate evaluation for radioactivity concentration in the fuel assembly can be obtained. (I.S.)

  10. Accurate Complex Systems Design: Integrating Serious Games with Petri Nets

    Directory of Open Access Journals (Sweden)

    Kirsten Sinclair

    2016-03-01

    Full Text Available Difficulty understanding the large number of interactions involved in complex systems makes their successful engineering a problem. Petri Nets are one graphical modelling technique used to describe and check proposed designs of complex systems thoroughly. While automatic analysis capabilities of Petri Nets are useful, their visual form is less so, particularly for communicating the design they represent. In engineering projects, this can lead to a gap in communications between people with different areas of expertise, negatively impacting achieving accurate designs.In contrast, although capable of representing a variety of real and imaginary objects effectively, behaviour of serious games can only be analysed manually through interactive simulation. This paper examines combining the complementary strengths of Petri Nets and serious games. The novel contribution of this work is a serious game prototype of a complex system design that has been checked thoroughly. Underpinned by Petri Net analysis, the serious game can be used as a high-level interface to communicate and refine the design.Improvement of a complex system design is demonstrated by applying the integration to a proof-of-concept case study.   

  11. AtRTD2: A Reference Transcript Dataset for accurate quantification of alternative splicing and expression changes in Arabidopsis thaliana RNA-seq data

    KAUST Repository

    Zhang, Runxuan; Calixto, Cristiane P G; Marquez, Yamile; Venhuizen, Peter; Tzioutziou, Nikoleta A; Guo, Wenbin; Spensley, Mark; Frei dit Frey, Nicolas; Hirt, Heribert; James, Allan B; Nimmo, Hugh G; Barta, Andrea; Kalyna, Maria; Brown, John W S

    2016-01-01

    transcript assemblies. AtRTD2 increases the diversity of transcripts and through application of stringent filters represents the most extensive and accurate transcript collection for Arabidopsis to date. We have demonstrated a generally good correlation

  12. Accurate and Precise Titriraetric Analysis of Uranium in Nuclear Fuels. RCN Report

    International Nuclear Information System (INIS)

    Tolk, A.; Lingerak, W.A.; Verheul-Klompmaker, T.A.

    1970-09-01

    For the accurate and precise titrimetric analysis of uranium in nuclear fuels, the material is dissolved in orthophosphoric and nitric acids. The nitric acid is fumed off, and the U (VI) present is analysed reductometrically in a CO 2 -atmosphere with iron (II) ammonium sulfate. For U 3 O 8 -test-sample aliquots of resp. 800 and 80 mg coefficients of variation of 0.012 resp. 0.11% are measured. (author)

  13. Theory of sampling: four critical success factors before analysis.

    Science.gov (United States)

    Wagner, Claas; Esbensen, Kim H

    2015-01-01

    Food and feed materials characterization, risk assessment, and safety evaluations can only be ensured if QC measures are based on valid analytical data, stemming from representative samples. The Theory of Sampling (TOS) is the only comprehensive theoretical framework that fully defines all requirements to ensure sampling correctness and representativity, and to provide the guiding principles for sampling in practice. TOS also defines the concept of material heterogeneity and its impact on the sampling process, including the effects from all potential sampling errors. TOS's primary task is to eliminate bias-generating errors and to minimize sampling variability. Quantitative measures are provided to characterize material heterogeneity, on which an optimal sampling strategy should be based. Four critical success factors preceding analysis to ensure a representative sampling process are presented here.

  14. Decision tree for accurate infection timing in individuals newly diagnosed with HIV-1 infection.

    Science.gov (United States)

    Verhofstede, Chris; Fransen, Katrien; Van Den Heuvel, Annelies; Van Laethem, Kristel; Ruelle, Jean; Vancutsem, Ellen; Stoffels, Karolien; Van den Wijngaert, Sigi; Delforge, Marie-Luce; Vaira, Dolores; Hebberecht, Laura; Schauvliege, Marlies; Mortier, Virginie; Dauwe, Kenny; Callens, Steven

    2017-11-29

    There is today no gold standard method to accurately define the time passed since infection at HIV diagnosis. Infection timing and incidence measurement is however essential to better monitor the dynamics of local epidemics and the effect of prevention initiatives. Three methods for infection timing were evaluated using 237 serial samples from documented seroconversions and 566 cross sectional samples from newly diagnosed patients: identification of antibodies against the HIV p31 protein in INNO-LIA, SediaTM BED CEIA and SediaTM LAg-Avidity EIA. A multi-assay decision tree for infection timing was developed. Clear differences in recency window between BED CEIA, LAg-Avidity EIA and p31 antibody presence were observed with a switch from recent to long term infection a median of 169.5, 108.0 and 64.5 days after collection of the pre-seroconversion sample respectively. BED showed high reliability for identification of long term infections while LAg-Avidity is highly accurate for identification of recent infections. Using BED as initial assay to identify the long term infections and LAg-Avidity as a confirmatory assay for those classified as recent infection by BED, explores the strengths of both while reduces the workload. The short recency window of p31 antibodies allows to discriminate very early from early infections based on this marker. BED recent infection results not confirmed by LAg-Avidity are considered to reflect a period more distant from the infection time. False recency predictions in this group can be minimized by elimination of patients with a CD4 count of less than 100 cells/mm3 or without no p31 antibodies. For 566 cross sectional sample the outcome of the decision tree confirmed the infection timing based on the results of all 3 markers but reduced the overall cost from 13.2 USD to 5.2 USD per sample. A step-wise multi assay decision tree allows accurate timing of the HIV infection at diagnosis at affordable effort and cost and can be an important

  15. Investigating the factorial structure and availability of work time control in a representative sample of the Swedish working population.

    Science.gov (United States)

    Albrecht, Sophie C; Kecklund, Göran; Tucker, Philip; Leineweber, Constanze

    2016-05-01

    Past research has often neglected the sub-dimensions of work time control (WTC). Moreover, differences in levels of WTC with respect to work and demographic characteristics have not yet been examined in a representative sample. We investigated these matters in a recent sample of the Swedish working population. The study was based on the 2014 data collection of the Swedish Longitudinal Occupational Survey of Health. We assessed the structure of the WTC measure using exploratory and confirmatory factor analysis. Differences in WTC by work and demographic characteristics were examined with independent samplet-tests, one-way ANOVAs and gender-stratified logistic regressions. Best model fit was found for a two-factor structure that distinguished between control over daily hours and control over time off (root mean square error of approximation = 0.06; 95% CI 0.04 to 0.09; Comparative Fit Index (CFI) = 0.99). Women, shift and public-sector workers reported lower control in relation to both factors. Age showed small associations with WTC, while a stronger link was suggested for civil status and family situation. Night, roster and rotating shift work seemed to be the most influential factors on reporting low control over daily hours and time off. Our data confirm the two-dimensional structure underlying WTC, namely the components 'control over daily hours' and 'control over time off'. Women, public-sector and shift workers reported lower levels of control. Future research should examine the public health implications of WTC, in particular whether increased control over daily hours and time off can reduce health problems associated with difficult working-time arrangements. © 2015 the Nordic Societies of Public Health.

  16. Experimental study and modelling of the well-mixing length. Application to the representativeness of sampling points in duct

    International Nuclear Information System (INIS)

    Alengry, Jonathan

    2014-01-01

    Monitoring of gaseous releases from nuclear installations in the environment and air cleaning efficiency measurement are based on regular measurements of concentrations of contaminants in outlet chimneys and ventilation systems. The concentration distribution may be heterogeneous at the measuring point if the distance setting of the mixing is not sufficient. The question is about the set up of the measuring point in duct and the error compared to the homogeneous concentration in case of non-compliance with this distance. This study defines the so-called 'well mixing length' from laboratory experiments. The bench designed for these tests allowed to reproduce flows in long circular and rectangular ducts, each including a bend. An optical measurement technique has been developed, calibrated and used to measure the concentration distribution of a tracer injected in the flow. The experimental results in cylindrical duct have validated an analytical model based on the convection-diffusion equation of a tracer, and allowed to propose models of good mixing length and representativeness of sampling points. In rectangular duct, the acquired measures constitute a first database on the evolution of the homogenization of a tracer, in the perspective of numerical simulations exploring more realistic conditions for measurements in situ. (author) [fr

  17. Accurate Evaluation of Quantum Integrals

    Science.gov (United States)

    Galant, D. C.; Goorvitch, D.; Witteborn, Fred C. (Technical Monitor)

    1995-01-01

    Combining an appropriate finite difference method with Richardson's extrapolation results in a simple, highly accurate numerical method for solving a Schrodinger's equation. Important results are that error estimates are provided, and that one can extrapolate expectation values rather than the wavefunctions to obtain highly accurate expectation values. We discuss the eigenvalues, the error growth in repeated Richardson's extrapolation, and show that the expectation values calculated on a crude mesh can be extrapolated to obtain expectation values of high accuracy.

  18. An automated blood sampling system used in positron emission tomography

    International Nuclear Information System (INIS)

    Eriksson, L.; Bohm, C.; Kesselberg, M.

    1988-01-01

    Fast dynamic function studies with positron emission tomography (PET), has the potential to give accurate information of physiological functions of the brain. This capability can be realised if the positron camera system accurately quantitates the tracer uptake in the brain with sufficiently high efficiency and in sufficiently short time intervals. However, in addition, the tracer concentration in blood, as a function of time, must be accurately determined. This paper describes and evaluates an automated blood sampling system. Two different detector units are compared. The use of the automated blood sampling system is demonstrated in studies of cerebral blood flow, in studies of the blood-brain barrier transfer of amino acids and of the cerebral oxygen consumption. 5 refs.; 7 figs

  19. Accurate 3D reconstruction of bony surfaces using ultrasonic synthetic aperture techniques for robotic knee arthroplasty.

    Science.gov (United States)

    Kerr, William; Rowe, Philip; Pierce, Stephen Gareth

    2017-06-01

    Robotically guided knee arthroplasty systems generally require an individualized, preoperative 3D model of the knee joint. This is typically measured using Computed Tomography (CT) which provides the required accuracy for preoperative surgical intervention planning. Ultrasound imaging presents an attractive alternative to CT, allowing for reductions in cost and the elimination of doses of ionizing radiation, whilst maintaining the accuracy of the 3D model reconstruction of the joint. Traditional phased array ultrasound imaging methods, however, are susceptible to poor resolution and signal to noise ratios (SNR). Alleviating these weaknesses by offering superior focusing power, synthetic aperture methods have been investigated extensively within ultrasonic non-destructive testing. Despite this, they have yet to be fully exploited in medical imaging. In this paper, the ability of a robotic deployed ultrasound imaging system based on synthetic aperture methods to accurately reconstruct bony surfaces is investigated. Employing the Total Focussing Method (TFM) and the Synthetic Aperture Focussing Technique (SAFT), two samples were imaged which were representative of the bones of the knee joint: a human-shaped, composite distal femur and a bovine distal femur. Data were captured using a 5MHz, 128 element 1D phased array, which was manipulated around the samples using a robotic positioning system. Three dimensional surface reconstructions were then produced and compared with reference models measured using a precision laser scanner. Mean errors of 0.82mm and 0.88mm were obtained for the composite and bovine samples, respectively, thus demonstrating the feasibility of the approach to deliver the sub-millimetre accuracy required for the application. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  20. Calibration of tip and sample temperature of a scanning tunneling microscope using a superconductive sample

    Energy Technology Data Exchange (ETDEWEB)

    Stocker, Matthias; Pfeifer, Holger; Koslowski, Berndt, E-mail: berndt.koslowski@uni-ulm.de [Institute of Solid State Physics, University of Ulm, D-89069 Ulm (Germany)

    2014-05-15

    The temperature of the electrodes is a crucial parameter in virtually all tunneling experiments. The temperature not only controls the thermodynamic state of the electrodes but also causes thermal broadening, which limits the energy resolution. Unfortunately, the construction of many scanning tunneling microscopes inherits a weak thermal link between tip and sample in order to make one side movable. Such, the temperature of that electrode is badly defined. Here, the authors present a procedure to calibrate the tip temperature by very simple means. The authors use a superconducting sample (Nb) and a standard tip made from W. Due to the asymmetry in the density of states of the superconductor (SC)—normal metal (NM) tunneling junction, the SC temperature controls predominantly the density of states while the NM controls the thermal smearing. By numerically simulating the I-V curves and numerically optimizing the tip temperature and the SC gap width, the tip temperature can be accurately deduced if the sample temperature is known or measureable. In our case, the temperature dependence of the SC gap may serve as a temperature sensor, leading to an accurate NM temperature even if the SC temperature is unknown.

  1. Calibration of tip and sample temperature of a scanning tunneling microscope using a superconductive sample

    International Nuclear Information System (INIS)

    Stocker, Matthias; Pfeifer, Holger; Koslowski, Berndt

    2014-01-01

    The temperature of the electrodes is a crucial parameter in virtually all tunneling experiments. The temperature not only controls the thermodynamic state of the electrodes but also causes thermal broadening, which limits the energy resolution. Unfortunately, the construction of many scanning tunneling microscopes inherits a weak thermal link between tip and sample in order to make one side movable. Such, the temperature of that electrode is badly defined. Here, the authors present a procedure to calibrate the tip temperature by very simple means. The authors use a superconducting sample (Nb) and a standard tip made from W. Due to the asymmetry in the density of states of the superconductor (SC)—normal metal (NM) tunneling junction, the SC temperature controls predominantly the density of states while the NM controls the thermal smearing. By numerically simulating the I-V curves and numerically optimizing the tip temperature and the SC gap width, the tip temperature can be accurately deduced if the sample temperature is known or measureable. In our case, the temperature dependence of the SC gap may serve as a temperature sensor, leading to an accurate NM temperature even if the SC temperature is unknown

  2. Sampling pig farms at the abattoir in a cross-sectional study - Evaluation of a sampling method.

    Science.gov (United States)

    Birkegård, Anna Camilla; Halasa, Tariq; Toft, Nils

    2017-09-15

    A cross-sectional study design is relatively inexpensive, fast and easy to conduct when compared to other study designs. Careful planning is essential to obtaining a representative sample of the population, and the recommended approach is to use simple random sampling from an exhaustive list of units in the target population. This approach is rarely feasible in practice, and other sampling procedures must often be adopted. For example, when slaughter pigs are the target population, sampling the pigs on the slaughter line may be an alternative to on-site sampling at a list of farms. However, it is difficult to sample a large number of farms from an exact predefined list, due to the logistics and workflow of an abattoir. Therefore, it is necessary to have a systematic sampling procedure and to evaluate the obtained sample with respect to the study objective. We propose a method for 1) planning, 2) conducting, and 3) evaluating the representativeness and reproducibility of a cross-sectional study when simple random sampling is not possible. We used an example of a cross-sectional study with the aim of quantifying the association of antimicrobial resistance and antimicrobial consumption in Danish slaughter pigs. It was not possible to visit farms within the designated timeframe. Therefore, it was decided to use convenience sampling at the abattoir. Our approach was carried out in three steps: 1) planning: using data from meat inspection to plan at which abattoirs and how many farms to sample; 2) conducting: sampling was carried out at five abattoirs; 3) evaluation: representativeness was evaluated by comparing sampled and non-sampled farms, and the reproducibility of the study was assessed through simulated sampling based on meat inspection data from the period where the actual data collection was carried out. In the cross-sectional study samples were taken from 681 Danish pig farms, during five weeks from February to March 2015. The evaluation showed that the sampling

  3. Inclusion of mobile phone numbers into an ongoing population health survey in New South Wales, Australia: design, methods, call outcomes, costs and sample representativeness.

    Science.gov (United States)

    Barr, Margo L; van Ritten, Jason J; Steel, David G; Thackway, Sarah V

    2012-11-22

    In Australia telephone surveys have been the method of choice for ongoing jurisdictional population health surveys. Although it was estimated in 2011 that nearly 20% of the Australian population were mobile-only phone users, the inclusion of mobile phone numbers into these existing landline population health surveys has not occurred. This paper describes the methods used for the inclusion of mobile phone numbers into an existing ongoing landline random digit dialling (RDD) health survey in an Australian state, the New South Wales Population Health Survey (NSWPHS). This paper also compares the call outcomes, costs and the representativeness of the resultant sample to that of the previous landline sample. After examining several mobile phone pilot studies conducted in Australia and possible sample designs (screening dual-frame and overlapping dual-frame), mobile phone numbers were included into the NSWPHS using an overlapping dual-frame design. Data collection was consistent, where possible, with the previous years' landline RDD phone surveys and between frames. Survey operational data for the frames were compared and combined. Demographic information from the interview data for mobile-only phone users, both, and total were compared to the landline frame using χ2 tests. Demographic information for each frame, landline and the mobile-only (equivalent to a screening dual frame design), and the frames combined (with appropriate overlap adjustment) were compared to the NSW demographic profile from the 2011 census using χ2 tests. In the first quarter of 2012, 3395 interviews were completed with 2171 respondents (63.9%) from the landline frame (17.6% landline only) and 1224 (36.1%) from the mobile frame (25.8% mobile only). Overall combined response, contact and cooperation rates were 33.1%, 65.1% and 72.2% respectively. As expected from previous research, the demographic profile of the mobile-only phone respondents differed most (more that were young, males, Aboriginal

  4. Representing major soil variability at regional scale by constrained Latin Hypercube Sampling of remote sensing data

    NARCIS (Netherlands)

    Mulder, V.L.; Bruin, de S.; Schaepman, M.E.

    2013-01-01

    This paper presents a sparse, remote sensing-based sampling approach making use of conditioned Latin Hypercube Sampling (cLHS) to assess variability in soil properties at regional scale. The method optimizes the sampling scheme for a defined spatial population based on selected covariates, which are

  5. Trace-element measurement in human blood samples

    International Nuclear Information System (INIS)

    Hamidian, M.R.; Ebrahimi-Fakhar, F.

    1992-01-01

    It is conceivable that some essential elements such as zinc, iron, calcium, copper, phosphorus, selenium, etc., have a major impact on biological and metabolical functions in the human body. The concentration of these elements is normally very minute and changes within a naturally set tolerance. The accurate measurement of these elements in biological samples, such as in blood, is one of the objectives of medical physics in diagnosis. There are many sophisticated methods to measure the accurate amount of each element in biological samples. The methods used in this project are a combination of proton-induced X-ray emission (PIXE) and neutron activation analysis (NAA). The PIXE and NAA are fast and reliable techniques for multielement analysis at the level of parts per million and less

  6. The accurate assessment of small-angle X-ray scattering data.

    Science.gov (United States)

    Grant, Thomas D; Luft, Joseph R; Carter, Lester G; Matsui, Tsutomu; Weiss, Thomas M; Martel, Anne; Snell, Edward H

    2015-01-01

    Small-angle X-ray scattering (SAXS) has grown in popularity in recent times with the advent of bright synchrotron X-ray sources, powerful computational resources and algorithms enabling the calculation of increasingly complex models. However, the lack of standardized data-quality metrics presents difficulties for the growing user community in accurately assessing the quality of experimental SAXS data. Here, a series of metrics to quantitatively describe SAXS data in an objective manner using statistical evaluations are defined. These metrics are applied to identify the effects of radiation damage, concentration dependence and interparticle interactions on SAXS data from a set of 27 previously described targets for which high-resolution structures have been determined via X-ray crystallography or nuclear magnetic resonance (NMR) spectroscopy. The studies show that these metrics are sufficient to characterize SAXS data quality on a small sample set with statistical rigor and sensitivity similar to or better than manual analysis. The development of data-quality analysis strategies such as these initial efforts is needed to enable the accurate and unbiased assessment of SAXS data quality.

  7. Validated sampling strategy for assessing contaminants in soil stockpiles

    International Nuclear Information System (INIS)

    Lame, Frank; Honders, Ton; Derksen, Giljam; Gadella, Michiel

    2005-01-01

    Dutch legislation on the reuse of soil requires a sampling strategy to determine the degree of contamination. This sampling strategy was developed in three stages. Its main aim is to obtain a single analytical result, representative of the true mean concentration of the soil stockpile. The development process started with an investigation into how sample pre-treatment could be used to obtain representative results from composite samples of heterogeneous soil stockpiles. Combining a large number of random increments allows stockpile heterogeneity to be fully represented in the sample. The resulting pre-treatment method was then combined with a theoretical approach to determine the necessary number of increments per composite sample. At the second stage, the sampling strategy was evaluated using computerised models of contaminant heterogeneity in soil stockpiles. The now theoretically based sampling strategy was implemented by the Netherlands Centre for Soil Treatment in 1995. It was applied to all types of soil stockpiles, ranging from clean to heavily contaminated, over a period of four years. This resulted in a database containing the analytical results of 2570 soil stockpiles. At the final stage these results were used for a thorough validation of the sampling strategy. It was concluded that the model approach has indeed resulted in a sampling strategy that achieves analytical results representative of the mean concentration of soil stockpiles. - A sampling strategy that ensures analytical results representative of the mean concentration in soil stockpiles is presented and validated

  8. Impacts on quality of life related to dental caries in a national representative sample of Thai 12- and 15-year-olds.

    Science.gov (United States)

    Krisdapong, S; Prasertsom, P; Rattanarangsima, K; Sheiham, A

    2013-01-01

    Dental caries is generally given the highest priority in national oral health services for school-aged populations. Yet, there is no study exploring the impacts on quality of life specifically related to dental caries in national samples of school-aged children. This study assessed prevalence and characteristics of oral impacts attributed to dental caries on quality of life and compared them with overall oral health impacts. In addition, associations of oral impacts attributed to dental caries and dental caries status were investigated. A national representative sample of 1,063 12- and 811 15-year-olds completed a sociodemographic and behavioural questionnaire, and were orally examined and interviewed about oral health-related quality of life using the Child-OIDP or OIDP indexes, respectively. Associations of condition-specific impacts (CS impacts) attributed to dental caries with components of DMF were investigated using χ(2) tests and multivariate logistic regressions. CS impacts attributed to dental caries were reported by nearly half the children and such impacts accounted for half of overall oral impacts from all oral conditions. The majority of impacts were of little intensity and affected only 1-2 daily performances, particularly performances on Eating, Emotional stability and Cleaning teeth. CS impacts were significantly positively associated with number of decayed teeth, and strongly associated with severe decay. Copyright © 2012 S. Karger AG, Basel.

  9. 21 CFR 203.39 - Donation of drug samples to charitable institutions.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Donation of drug samples to charitable... SERVICES (CONTINUED) DRUGS: GENERAL PRESCRIPTION DRUG MARKETING Samples § 203.39 Donation of drug samples... donation record accurately describes the drug sample delivered and that no drug sample is adulterated or...

  10. The influence of stress, depression, and anxiety on PSA screening rates in a nationally representative sample.

    Science.gov (United States)

    Kotwal, Ashwin A; Schumm, Phil; Mohile, Supriya G; Dale, William

    2012-12-01

    Prostate-specific antigen (PSA) testing for prostate cancer is controversial, with concerning rates of both overscreening and underscreening. The reasons for the observed rates of screening are unknown, and few studies have examined the relationship of psychological health to PSA screening rates. Understanding this relationship can help guide interventions to improve informed decision-making for screening. A nationally representative sample of men 57-85 years old without prostate cancer (N = 1169) from the National Social life, Health and Aging Project was analyzed. The independent relationship of validated psychological health scales measuring stress, anxiety, and depression to PSA testing rates was assessed using multivariable logistic regression analyses. PSA screening rates were significantly lower for men with higher perceived stress [odds ratio (OR) = 0.76, P = 0.006], but not for higher depressive symptoms (OR = 0.89, P = 0.22) when accounting for stress. Anxiety influences PSA screening through an interaction with number of doctor visits (P = 0.02). Among the men who visited the doctor once those with higher anxiety were less likely to be screened (OR = 0.65, P = 0.04). Conversely, those who visited the doctor 10+ times with higher anxiety were more likely to be screened (OR = 1.71, P = 0.04). Perceived stress significantly lowers PSA screening likelihood, and it seems to partly mediate the negative relationship of depression with screening likelihood. Anxiety affects PSA screening rates differently for men with different numbers of doctor visits. Interventions to influence PSA screening rates should recognize the role of the patients' psychological state to improve their likelihood of making informed decisions and improve screening appropriateness.

  11. Intraoperative bone and bone marrow sampling: a simple method for accurate measurement of uptake of radiopharmaceuticals in bone and bone marrow

    International Nuclear Information System (INIS)

    Oyen, W.J.G.; Buijs, W.C.A.M.; Kampen, A. van; Koenders, E.B.; Claessens, R.A.M.J.; Corstens, F.H.M.

    1993-01-01

    Accurate estimation of bone marrow uptake of radiopharmaceuticals is of crucial importance for accurate whole body dosimetry. In this study, a method for obtaining normal bone marrow and bone during routine surgery without inconvenience to volunteers is suggested and compared to an indirect method. In five volunteers (group 1), 4 MBq 111 In-labelled human polyclonal IgG ( 111 In-IgG) was administered 48h before placement of a total hip prosthesis. After resection of the femoral head and neck, bone marrow was aspirated from the medullary space with a biopsy needle. In five patients, suspected of having infectious disease (group 2), bone marrow uptake was calculated according to a well-accepted method using regions of interest over the lumbar spine, 48h after injection of 75 MBq 111 In-IgG. Bone marrow uptake in group 1 (4.5 ±1.3%D kg -1 ) was significantly lower than that in group 2 (8.5 ± 2.1%D kg -1 ) (P<0.01). Blood and plasma activity did not differ significantly for both groups. This method provides a system for directly and accurately measuring uptake and retention in normal bone marrow and bone of all radiopharmaceuticals at various time points. It is a safe and simple procedure without any discomfort to the patient. Since small amounts of activity are sufficient, the radiation dose to the patient is low. (author)

  12. Accurate and noninvasive embryos screening during in vitro fertilization (IVF) assisted by Raman analysis of embryos culture medium

    International Nuclear Information System (INIS)

    Shen, A G; Peng, J; Su, L; Wang, X H; Hu, J M; Zhao, Q H; Yang, J

    2012-01-01

    In combination with morphological evaluation tests, we employ Raman spectroscopy to select higher potential reproductive embryos during in vitro fertilization (IVF) based on chemical composition of embryos culture medium. In this study, 57 Raman spectra are acquired from both higher and lower quality embryos culture medium (ECM) from 10 patients which have been preliminarily confirmed by clinical assay. Data are fit by using a linear combination model of least squares method in which 12 basis spectra represent the chemical features of ECM. The final fitting coefficients provide insight into the chemical compositions of culture medium samples and are subsequently used as criterion to evaluate the quality of embryos. The relative fitting coefficients ratios of sodium pyruvate/albumin and phenylalanine/albumin seem act as key roles in the embryo screening, attaining 85.7% accuracy in comparison with clinical pregnancy. The good results demonstrate that Raman spectroscopy therefore is an important candidate for an accurate and noninvasive screening of higher quality embryos, which potentially decrease the time-consuming clinical trials during IVF

  13. Approaching system equilibrium with accurate or not accurate feedback information in a two-route system

    Science.gov (United States)

    Zhao, Xiao-mei; Xie, Dong-fan; Li, Qi

    2015-02-01

    With the development of intelligent transport system, advanced information feedback strategies have been developed to reduce traffic congestion and enhance the capacity. However, previous strategies provide accurate information to travelers and our simulation results show that accurate information brings negative effects, especially in delay case. Because travelers prefer to the best condition route with accurate information, and delayed information cannot reflect current traffic condition but past. Then travelers make wrong routing decisions, causing the decrease of the capacity and the increase of oscillations and the system deviating from the equilibrium. To avoid the negative effect, bounded rationality is taken into account by introducing a boundedly rational threshold BR. When difference between two routes is less than the BR, routes have equal probability to be chosen. The bounded rationality is helpful to improve the efficiency in terms of capacity, oscillation and the gap deviating from the system equilibrium.

  14. Use of psychotherapy in a representative adult community sample in São Paulo, Brazil

    Science.gov (United States)

    Blay, Sergio L.; Fillenbaum, Gerda G.; da Silva, Paula Freitas R.; Peluso, Erica T.

    2014-01-01

    Little is known about the use of psychotherapy to treat common mental disorders in a major city in a middle income country. Data come from in-home interviews with a stratified random sample of 2,000 community residents age 18–65 in the city of São Paulo, Brazil. The information obtained included sociodemographic characteristics; psychotropic drugs; mental status; and lifetime, previous 12 months, and current use of psychotherapy. Logistic regression was used to examine determinants of use of psychotherapy. Of the sample, 22.7% met General Health Questionnaire-12 criteria for common mental disorders. Lifetime, previous 12 months, and current use of psychotherapy were reported by 14.6%, 4.6%, and 2.3% of the sample respectively. Users were typically women, more educated, higher income, not married, unemployed, with common mental disorders. Further analysis found that 47% (with higher education and income) paid out-of-pocket, and 53% used psychotropic medication. Psychotherapy does not appear to be the preferred treatment for common mental disorders. PMID:25118139

  15. Applying Exploratory Structural Equation Modeling to Examine the Student-Teacher Relationship Scale in a Representative Greek Sample.

    Science.gov (United States)

    Tsigilis, Nikolaos; Gregoriadis, Athanasios; Grammatikopoulos, Vasilis; Zachopoulou, Evridiki

    2018-01-01

    Teacher-child relationships in early childhood are a fundamental prerequisite for children's social, emotional, and academic development. The Student-Teacher Relationship Scale (STRS) is one of the most widely accepted and used instruments that evaluate the quality of teacher-child relationships. STRS is a 28-item questionnaire that assess three relational dimensions, Closeness, Conflict, and Dependency. The relevant literature has shown a pattern regarding the difficulty to support the STRS factor structure with CFA, while it is well-documented with EFA. Recently, a new statistical technique was proposed to combine the best of the CFA and EFA namely, the Exploratory Structural Equation Modeling (ESEM). The purpose of this study was (a) to examine the factor structure of the STRS in a Greek national sample. Toward this end, the ESEM framework was applied in order to overcome the limitations of EFA and CFA, (b) to confirm previous findings about the cultural influence in teacher-child relationship patterns, and (c) to examine the invariance of STRS across gender and age. Early educators from a representative Greek sample size of 535 child care and kindergarten centers completed the STRS for 4,158 children. CFA as well as ESEM procedures were implemented. Results showed that ESEM provided better fit to the data than CFA in both groups, supporting the argument that CFA is an overly restrictive approach in comparison to ESEM for the study of STRS. All primary loadings were statistically significant and were associated with their respective latent factors. Contrary to the existing literature conducted in USA and northern Europe, the association between Closeness and Dependency yielded a positive correlation. This finding is in line with previous studies conducted in Greece and confirm the existence of cultural differences in teacher-child relationships. In addition, findings supported the configural, metric, scalar, and variance/covariance equivalence of the STRS

  16. Applying Exploratory Structural Equation Modeling to Examine the Student-Teacher Relationship Scale in a Representative Greek Sample

    Directory of Open Access Journals (Sweden)

    Nikolaos Tsigilis

    2018-05-01

    Full Text Available Teacher-child relationships in early childhood are a fundamental prerequisite for children's social, emotional, and academic development. The Student-Teacher Relationship Scale (STRS is one of the most widely accepted and used instruments that evaluate the quality of teacher-child relationships. STRS is a 28-item questionnaire that assess three relational dimensions, Closeness, Conflict, and Dependency. The relevant literature has shown a pattern regarding the difficulty to support the STRS factor structure with CFA, while it is well-documented with EFA. Recently, a new statistical technique was proposed to combine the best of the CFA and EFA namely, the Exploratory Structural Equation Modeling (ESEM. The purpose of this study was (a to examine the factor structure of the STRS in a Greek national sample. Toward this end, the ESEM framework was applied in order to overcome the limitations of EFA and CFA, (b to confirm previous findings about the cultural influence in teacher-child relationship patterns, and (c to examine the invariance of STRS across gender and age. Early educators from a representative Greek sample size of 535 child care and kindergarten centers completed the STRS for 4,158 children. CFA as well as ESEM procedures were implemented. Results showed that ESEM provided better fit to the data than CFA in both groups, supporting the argument that CFA is an overly restrictive approach in comparison to ESEM for the study of STRS. All primary loadings were statistically significant and were associated with their respective latent factors. Contrary to the existing literature conducted in USA and northern Europe, the association between Closeness and Dependency yielded a positive correlation. This finding is in line with previous studies conducted in Greece and confirm the existence of cultural differences in teacher-child relationships. In addition, findings supported the configural, metric, scalar, and variance/covariance equivalence of

  17. [Acceptance of lot sampling: its applicability to the evaluation of the primary care services portfolio].

    Science.gov (United States)

    López-Picazo Ferrer, J

    2001-05-15

    To determine the applicability of the acceptance of lot quality assurance sampling (LQAS) in the primary care service portfolio, comparing its results with those given by classic evaluation. Compliance with the minimum technical norms (MTN) of the service of diabetic care was evaluated through the classic methodology (confidence 95%, accuracy 5%, representativeness of area, sample of 376 histories) and by LQAS (confidence 95%, power 80%, representativeness of primary care team (PCT), defining a lot by MTN and PCT, sample of 13 histories/PCT). Effort, information obtained and its operative nature were assessed. 44 PCTs from Murcia Primary Care Region. Classic methodology: compliance with MTN ranged between 91.1% (diagnosis, 95% CI, 84.2-94.0) and 30% (repercussion in viscera, 95% CI, 25.4-34.6). Objectives in three MTN were reached (diagnosis, history and EKG). LQAS: no MTN was accepted in all the PCTs, being the most accepted (42 PCT, 95.6%) and the least accepted (24 PCT, 55.6%). In 9 PCT all were accepted (20.4%), and in 2 none were accepted (4.5%). Data were analysed through Pareto charts. Classic methodology offered accurate results, but did not identify which centres were those that did not comply (general focus). LQAS was preferable for evaluating MTN and probably coverage because: 1) it uses small samples, which foment internal quality-improvement initiatives; 2) it is easy and rapid to execute; 3) it identifies the PCT and criteria where there is an opportunity for improvement (specific focus), and 4) it can be used operatively for monitoring.

  18. Metabolite signal identification in accurate mass metabolomics data with MZedDB, an interactive m/z annotation tool utilising predicted ionisation behaviour 'rules'

    Directory of Open Access Journals (Sweden)

    Snowdon Stuart

    2009-07-01

    Full Text Available Abstract Background Metabolomics experiments using Mass Spectrometry (MS technology measure the mass to charge ratio (m/z and intensity of ionised molecules in crude extracts of complex biological samples to generate high dimensional metabolite 'fingerprint' or metabolite 'profile' data. High resolution MS instruments perform routinely with a mass accuracy of Results Metabolite 'structures' harvested from publicly accessible databases were converted into a common format to generate a comprehensive archive in MZedDB. 'Rules' were derived from chemical information that allowed MZedDB to generate a list of adducts and neutral loss fragments putatively able to form for each structure and calculate, on the fly, the exact molecular weight of every potential ionisation product to provide targets for annotation searches based on accurate mass. We demonstrate that data matrices representing populations of ionisation products generated from different biological matrices contain a large proportion (sometimes > 50% of molecular isotopes, salt adducts and neutral loss fragments. Correlation analysis of ESI-MS data features confirmed the predicted relationships of m/z signals. An integrated isotope enumerator in MZedDB allowed verification of exact isotopic pattern distributions to corroborate experimental data. Conclusion We conclude that although ultra-high accurate mass instruments provide major insight into the chemical diversity of biological extracts, the facile annotation of a large proportion of signals is not possible by simple, automated query of current databases using computed molecular formulae. Parameterising MZedDB to take into account predicted ionisation behaviour and the biological source of any sample improves greatly both the frequency and accuracy of potential annotation 'hits' in ESI-MS data.

  19. A high-precision sampling scheme to assess persistence and transport characteristics of micropollutants in rivers.

    Science.gov (United States)

    Schwientek, Marc; Guillet, Gaëlle; Rügner, Hermann; Kuch, Bertram; Grathwohl, Peter

    2016-01-01

    Increasing numbers of organic micropollutants are emitted into rivers via municipal wastewaters. Due to their persistence many pollutants pass wastewater treatment plants without substantial removal. Transport and fate of pollutants in receiving waters and export to downstream ecosystems is not well understood. In particular, a better knowledge of processes governing their environmental behavior is needed. Although a lot of data are available concerning the ubiquitous presence of micropollutants in rivers, accurate data on transport and removal rates are lacking. In this paper, a mass balance approach is presented, which is based on the Lagrangian sampling scheme, but extended to account for precise transport velocities and mixing along river stretches. The calculated mass balances allow accurate quantification of pollutants' reactivity along river segments. This is demonstrated for representative members of important groups of micropollutants, e.g. pharmaceuticals, musk fragrances, flame retardants, and pesticides. A model-aided analysis of the measured data series gives insight into the temporal dynamics of removal processes. The occurrence of different removal mechanisms such as photooxidation, microbial degradation, and volatilization is discussed. The results demonstrate, that removal processes are highly variable in time and space and this has to be considered for future studies. The high precision sampling scheme presented could be a powerful tool for quantifying removal processes under different boundary conditions and in river segments with contrasting properties. Copyright © 2015. Published by Elsevier B.V.

  20. Assessing childhood maltreatment and mental health correlates of disordered eating profiles in a nationally representative sample of English females.

    Science.gov (United States)

    Armour, Cherie; Műllerová, Jana; Fletcher, Shelley; Lagdon, Susan; Burns, Carol Rhonda; Robinson, Martin; Robinson, Jake

    2016-03-01

    Previous research suggests that childhood maltreatment is associated with the onset of eating disorders (ED). In turn, EDs are associated with alternative psychopathologies such as depression and posttraumatic stress disorder (PTSD), and with suicidality. Moreover, it has been reported that various ED profiles may exist. The aim of the current study was to examine the profiles of disordered eating and the associations of these with childhood maltreatment and with mental health psychopathology. The current study utilised a representative sample of English females (N = 4206) and assessed for the presence of disordered eating profiles using Latent Class Analysis. Multinomial logistic regression was implemented to examine the associations of childhood sexual and physical abuse with the disordered eating profiles and the associations of these with PTSD, depression and suicidality. Results supported those of previous findings in that we found five latent classes of which three were regarded as disordered eating classes. Significant relationships were found between these and measures of childhood trauma and mental health outcomes. Childhood sexual and physical abuse increased the likelihood of membership in disordered eating classes and these in turn increased the likelihood of adverse mental health and suicidal outcomes.

  1. The Benefits of Sample Return: Connecting Apollo Soils and Diviner Lunar Radiometer Remote Sensing Data

    Science.gov (United States)

    Greenhagen, B. T.; Donaldson-Hanna, K. L.; Thomas, I. R.; Bowles, N. E.; Allen, C. C.; Pieters, C. M.; Paige, D. A.

    2014-01-01

    The Diviner Lunar Radiometer, onboard NASA's Lunar Reconnaissance Orbiter, has produced the first global, high resolution, thermal infrared observations of an airless body. The Moon, which is the most accessible member of this most abundant class of solar system objects, is also the only body for which we have extraterrestrial samples with known spatial context. Here we present the results of a comprehensive study to reproduce an accurate simulated lunar environment, evaluate the most appropriate sample and measurement conditions, collect thermal infrared spectra of a representative suite of Apollo soils, and correlate them with Diviner observations of the lunar surface. We find that analyses of Diviner observations of individual sampling stations and SLE measurements of returned Apollo soils show good agreement, while comparisons to thermal infrared reflectance under terrestrial conditions do not agree well, which underscores the need for SLE measurements and validates the Diviner compositional dataset. Future work includes measurement of additional soils in SLE and cross comparisons with measurements in JPL Simulated Airless Body Emission Laboratory (SABEL).

  2. Passive sampling methods for contaminated sediments

    DEFF Research Database (Denmark)

    Peijnenburg, Willie J.G.M.; Teasdale, Peter R.; Reible, Danny

    2014-01-01

    “Dissolved” concentrations of contaminants in sediment porewater (Cfree) provide a more relevant exposure metric for risk assessment than do total concentrations. Passive sampling methods (PSMs) for estimating Cfree offer the potential for cost-efficient and accurate in situ characterization...

  3. Log sampling methods and software for stand and landscape analyses.

    Science.gov (United States)

    Lisa J. Bate; Torolf R. Torgersen; Michael J. Wisdom; Edward O. Garton; Shawn C. Clabough

    2008-01-01

    We describe methods for efficient, accurate sampling of logs at landscape and stand scales to estimate density, total length, cover, volume, and weight. Our methods focus on optimizing the sampling effort by choosing an appropriate sampling method and transect length for specific forest conditions and objectives. Sampling methods include the line-intersect method and...

  4. Association of Dietary Behaviors with Physical Activity in a Nationally Representative Sample of Children and Adolescents: the CASPIAN- IV Study

    Directory of Open Access Journals (Sweden)

    Saeid Safiri

    2016-03-01

    Full Text Available Background: Nutritional health and adequate physical activity (PA, especially in childhood and grow periods, have a substantial role in health. This study assessed the association of dietary behaviors (main courses and snacks intake with PA in children and adolescents. Materials and Methods: Using multistage random cluster sampling method, a representative sample of 14,880 school students were selected from urban and rural areas of 30 provinces of Iran. Through a validated questionnaire, daily consumption of main course ( breakfast, lunch, and dinner as well as daily consumption of different snacks and health foods ( fast foods, milk, vegetables, dry fruits, fresh fruits, sweetened beverages, salty snacks and sweets were recorded for every participants. Information of past week weekly frequency of leisure time PA was collected. Results: Overall, 13,486 out of 14,880 students (response rate: 90.6% participated in this survey. Participants consisted of 6,640 (49.2% girls and 75.6% urban residents; their mean and standard deviation (SD age was 12.47 (3.36 years. Daily consumption of fresh fruits (odds ratio [OR]: 1.35, 95%confidence interval [CI]: 1.20-1.52, dried fruits (OR: 1.21; 95%CI: 1.06-1.40, vegetable (OR: 1.39; 95% CI: 1.24-1.56, and milk (OR: 1.35; 95% CI: 1.21-1.52 increased the odds of high PA compare to low PA in adjusted model.  Skipping the breakfast, lunch and dinner decreased the odds of moderate and high PA compare to low PA (P

  5. Determination of calcium, potassium, manganese, iron, copper and zinc levels in representative samples of two onion cultivars using total reflection X-ray fluorescence and ultrasound extraction procedure

    International Nuclear Information System (INIS)

    Alvarez, J.; Marco, L.M.; Arroyo, J.; Greaves, E.D.; Rivas, R.

    2003-01-01

    The chemical characterization of onion cultivar samples is an important tool for the enhancement of their productivity due to the fact that chemical composition is closed related to the quality of the products. A new sample preparation procedure for elemental characterization is proposed, involving the acid extraction of the analytes from crude samples by means of an ultrasonic bath, avoiding the required digestion of samples in vegetable tissue analysis. The technique of total reflection X-ray fluorescence (TXRF) was successfully applied for the simultaneous determination of the elements Ca, K, Mn, Fe, Cu and Zn. The procedure was compared with the wet ashing and dry ashing procedures for all the elements using multivariate analysis and the Scheffe test. The technique of flame atomic absorption spectrometry (FAAS) was employed for comparison purposes and accuracy evaluation of the proposed analysis method. A good agreement between the two techniques was found when using the dry ashing and ultrasound leaching procedures. The levels of each element found for representative samples of two onion cultivars (Yellow Granex PRR 502 and 438 Granex) were also compared by the same method. Levels of K, Mn and Zn were significantly higher in the 438 Granex cultivar, while levels of Ca, Fe and Cu were significantly higher in the Yellow Granex PRR 502 cultivar

  6. An accurate measurement of the baryonic Tully-Fisher relation with heavily gas-dominated ALFALFA galaxies

    Science.gov (United States)

    Papastergis, E.; Adams, E. A. K.; van der Hulst, J. M.

    2016-09-01

    We use a sample of 97 galaxies selected from the Arecibo legacy fast ALFA (ALFALFA) 21 cm survey to make an accurate measurement of the baryonic Tully-Fisher relation (BTFR). These galaxies are specifically selected to be heavily gas-dominated (Mgas/M∗ ≳ 2.7) and to be oriented edge-on. The former property ensures that the error on the galactic baryonic mass is small, despite the large systematic uncertainty involved in galactic stellar mass estimates. The latter property means that rotational velocities can be derived directly from the width of the 21 cm emission line, without any need for inclination corrections. We measure a slope for the linewidth-based BTFR of α = 3.75 ± 0.11, a value that is somewhat steeper than (but in broad agreement with) previous literature results. The relation is remarkably tight, with almost all galaxies being located within a perpendicular distance of ± 0.1 dex from the best fit line. The low observational error budget for our sample enables us to establish that, despite its tightness, the measured linewidth-based BTFR has some small (I.e., non-zero) intrinsic scatter. We furthermore find a systematic difference in the BTFR of galaxies with "double-horned" 21 cm line profiles - suggestive of flat outer galactic rotation curves - and those with "peaked" profiles - suggestive of rising rotation curves. When we restrict our sample of galaxies to objects in the former category, we measure a slightly steeper slope of α = 4.13 ± 0.15. Overall, the high-accuracy measurement of the BTFR presented in this article is intended as a reliable observational benchmark against which to test theoretical expectations. Here we consider a representative set of semi-analytic models and hydrodynamic simulations in the lambda cold dark matter (ΛCDM) context, as well as modified Newtonian dynamics (MOND). In the near future, interferometric follow-up observations of several sample members will enable us to further refine the BTFR measurement, and

  7. Accurately fitting advanced training. Flexible simulator training by modular training course concepts

    International Nuclear Information System (INIS)

    Sickora, Katrin; Cremer, Hans-Peter

    2010-01-01

    Every employee of a power plant contributes with his individual expertise to the success of the enterprise. Certainly personal skills of employees differ from each other as well as power plants are different. With respect to effective simulator training this means that no two simulator training courses can be identical. To exactly meet the requirements of our customers KWS has developed modules for simulation training courses. Each module represents either a technical subject or addresses a topic in the field of soft skills. An accurately fitting combination of several of these modules to the needs of our customers allows for most efficient simulator training courses. (orig.)

  8. Getting DNA copy numbers without control samples

    Directory of Open Access Journals (Sweden)

    Ortiz-Estevez Maria

    2012-08-01

    Full Text Available Abstract Background The selection of the reference to scale the data in a copy number analysis has paramount importance to achieve accurate estimates. Usually this reference is generated using control samples included in the study. However, these control samples are not always available and in these cases, an artificial reference must be created. A proper generation of this signal is crucial in terms of both noise and bias. We propose NSA (Normality Search Algorithm, a scaling method that works with and without control samples. It is based on the assumption that genomic regions enriched in SNPs with identical copy numbers in both alleles are likely to be normal. These normal regions are predicted for each sample individually and used to calculate the final reference signal. NSA can be applied to any CN data regardless the microarray technology and preprocessing method. It also finds an optimal weighting of the samples minimizing possible batch effects. Results Five human datasets (a subset of HapMap samples, Glioblastoma Multiforme (GBM, Ovarian, Prostate and Lung Cancer experiments have been analyzed. It is shown that using only tumoral samples, NSA is able to remove the bias in the copy number estimation, to reduce the noise and therefore, to increase the ability to detect copy number aberrations (CNAs. These improvements allow NSA to also detect recurrent aberrations more accurately than other state of the art methods. Conclusions NSA provides a robust and accurate reference for scaling probe signals data to CN values without the need of control samples. It minimizes the problems of bias, noise and batch effects in the estimation of CNs. Therefore, NSA scaling approach helps to better detect recurrent CNAs than current methods. The automatic selection of references makes it useful to perform bulk analysis of many GEO or ArrayExpress experiments without the need of developing a parser to find the normal samples or possible batches within the

  9. SNP Data Quality Control in a National Beef and Dairy Cattle System and Highly Accurate SNP Based Parentage Verification and Identification

    Directory of Open Access Journals (Sweden)

    Matthew C. McClure

    2018-03-01

    Full Text Available A major use of genetic data is parentage verification and identification as inaccurate pedigrees negatively affect genetic gain. Since 2012 the international standard for single nucleotide polymorphism (SNP verification in Bos taurus cattle has been the ISAG SNP panels. While these ISAG panels provide an increased level of parentage accuracy over microsatellite markers (MS, they can validate the wrong parent at ≤1% misconcordance rate levels, indicating that more SNP are needed if a more accurate pedigree is required. With rapidly increasing numbers of cattle being genotyped in Ireland that represent 61 B. taurus breeds from a wide range of farm types: beef/dairy, AI/pedigree/commercial, purebred/crossbred, and large to small herd size the Irish Cattle Breeding Federation (ICBF analyzed different SNP densities to determine that at a minimum ≥500 SNP are needed to consistently predict only one set of parents at a ≤1% misconcordance rate. For parentage validation and prediction ICBF uses 800 SNP (ICBF800 selected based on SNP clustering quality, ISAG200 inclusion, call rate (CR, and minor allele frequency (MAF in the Irish cattle population. Large datasets require sample and SNP quality control (QC. Most publications only deal with SNP QC via CR, MAF, parent-progeny conflicts, and Hardy-Weinberg deviation, but not sample QC. We report here parentage, SNP QC, and a genomic sample QC pipelines to deal with the unique challenges of >1 million genotypes from a national herd such as SNP genotype errors from mis-tagging of animals, lab errors, farm errors, and multiple other issues that can arise. We divide the pipeline into two parts: a Genotype QC and an Animal QC pipeline. The Genotype QC identifies samples with low call rate, missing or mixed genotype classes (no BB genotype or ABTG alleles present, and low genotype frequencies. The Animal QC handles situations where the genotype might not belong to the listed individual by identifying: >1 non

  10. Simulation of DNAPL migration in heterogeneous translucent porous media based on estimation of representative elementary volume

    Science.gov (United States)

    Wu, Ming; Wu, Jianfeng; Wu, Jichun

    2017-10-01

    When the dense nonaqueous phase liquid (DNAPL) comes into the subsurface environment, its migration behavior is crucially affected by the permeability and entry pressure of subsurface porous media. A prerequisite for accurately simulating DNAPL migration in aquifers is then the determination of the permeability, entry pressure and corresponding representative elementary volumes (REV) of porous media. However, the permeability, entry pressure and corresponding representative elementary volumes (REV) are hard to determine clearly. This study utilizes the light transmission micro-tomography (LTM) method to determine the permeability and entry pressure of two dimensional (2D) translucent porous media and integrates the LTM with a criterion of relative gradient error to quantify the corresponding REV of porous media. As a result, the DNAPL migration in porous media might be accurately simulated by discretizing the model at the REV dimension. To validate the quantification methods, an experiment of perchloroethylene (PCE) migration is conducted in a two-dimensional heterogeneous bench-scale aquifer cell. Based on the quantifications of permeability, entry pressure and REV scales of 2D porous media determined by the LTM and relative gradient error, different models with different sizes of discretization grid are used to simulate the PCE migration. It is shown that the model based on REV size agrees well with the experimental results over the entire migration period including calibration, verification and validation processes. This helps to better understand the microstructures of porous media and achieve accurately simulating DNAPL migration in aquifers based on the REV estimation.

  11. Development of an accurate, sensitive, and robust isotope dilution laser ablation ICP-MS method for simultaneous multi-element analysis (chlorine, sulfur, and heavy metals) in coal samples

    International Nuclear Information System (INIS)

    Boulyga, Sergei F.; Heilmann, Jens; Heumann, Klaus G.; Prohaska, Thomas

    2007-01-01

    A method for the direct multi-element determination of Cl, S, Hg, Pb, Cd, U, Br, Cr, Cu, Fe, and Zn in powdered coal samples has been developed by applying inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) with laser-assisted introduction into the plasma. A sector-field ICP-MS with a mass resolution of 4,000 and a high-ablation rate laser ablation system provided significantly better sensitivity, detection limits, and accuracy compared to a conventional laser ablation system coupled with a quadrupole ICP-MS. The sensitivity ranges from about 590 cps for 35 Cl + to more than 6 x 10 5 cps for 238 U + for 1 μg of trace element per gram of coal sample. Detection limits vary from 450 ng g -1 for chlorine and 18 ng g -1 for sulfur to 9.5 pg g -1 for mercury and 0.3 pg g -1 for uranium. Analyses of minor and trace elements in four certified reference materials (BCR-180 Gas Coal, BCR-331 Steam Coal, SRM 1632c Trace Elements in Coal, SRM 1635 Trace Elements in Coal) yielded good agreement of usually not more than 5% deviation from the certified values and precisions of less than 10% relative standard deviation for most elements. Higher relative standard deviations were found for particular elements such as Hg and Cd caused by inhomogeneities due to associations of these elements within micro-inclusions in coal which was demonstrated for Hg in SRM 1635, SRM 1632c, and another standard reference material (SRM 2682b, Sulfur and Mercury in Coal). The developed LA-ICP-IDMS method with its simple sample pretreatment opens the possibility for accurate, fast, and highly sensitive determinations of environmentally critical contaminants in coal as well as of trace impurities in similar sample materials like graphite powder and activated charcoal on a routine basis. (orig.)

  12. Development of an accurate, sensitive, and robust isotope dilution laser ablation ICP-MS method for simultaneous multi-element analysis (chlorine, sulfur, and heavy metals) in coal samples.

    Science.gov (United States)

    Boulyga, Sergei F; Heilmann, Jens; Prohaska, Thomas; Heumann, Klaus G

    2007-10-01

    A method for the direct multi-element determination of Cl, S, Hg, Pb, Cd, U, Br, Cr, Cu, Fe, and Zn in powdered coal samples has been developed by applying inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) with laser-assisted introduction into the plasma. A sector-field ICP-MS with a mass resolution of 4,000 and a high-ablation rate laser ablation system provided significantly better sensitivity, detection limits, and accuracy compared to a conventional laser ablation system coupled with a quadrupole ICP-MS. The sensitivity ranges from about 590 cps for (35)Cl+ to more than 6 x 10(5) cps for (238)U+ for 1 microg of trace element per gram of coal sample. Detection limits vary from 450 ng g(-1) for chlorine and 18 ng g(-1) for sulfur to 9.5 pg g(-1) for mercury and 0.3 pg g(-1) for uranium. Analyses of minor and trace elements in four certified reference materials (BCR-180 Gas Coal, BCR-331 Steam Coal, SRM 1632c Trace Elements in Coal, SRM 1635 Trace Elements in Coal) yielded good agreement of usually not more than 5% deviation from the certified values and precisions of less than 10% relative standard deviation for most elements. Higher relative standard deviations were found for particular elements such as Hg and Cd caused by inhomogeneities due to associations of these elements within micro-inclusions in coal which was demonstrated for Hg in SRM 1635, SRM 1632c, and another standard reference material (SRM 2682b, Sulfur and Mercury in Coal). The developed LA-ICP-IDMS method with its simple sample pretreatment opens the possibility for accurate, fast, and highly sensitive determinations of environmentally critical contaminants in coal as well as of trace impurities in similar sample materials like graphite powder and activated charcoal on a routine basis.

  13. Accurate hydrocarbon estimates attained with radioactive isotope

    International Nuclear Information System (INIS)

    Hubbard, G.

    1983-01-01

    To make accurate economic evaluations of new discoveries, an oil company needs to know how much gas and oil a reservoir contains. The porous rocks of these reservoirs are not completely filled with gas or oil, but contain a mixture of gas, oil and water. It is extremely important to know what volume percentage of this water--called connate water--is contained in the reservoir rock. The percentage of connate water can be calculated from electrical resistivity measurements made downhole. The accuracy of this method can be improved if a pure sample of connate water can be analyzed or if the chemistry of the water can be determined by conventional logging methods. Because of the similarity of the mud filtrate--the water in a water-based drilling fluid--and the connate water, this is not always possible. If the oil company cannot distinguish between connate water and mud filtrate, its oil-in-place calculations could be incorrect by ten percent or more. It is clear that unless an oil company can be sure that a sample of connate water is pure, or at the very least knows exactly how much mud filtrate it contains, its assessment of the reservoir's water content--and consequently its oil or gas content--will be distorted. The oil companies have opted for the Repeat Formation Tester (RFT) method. Label the drilling fluid with small doses of tritium--a radioactive isotope of hydrogen--and it will be easy to detect and quantify in the sample

  14. Characterizing the context of sedentary lifestyles in a representative sample of adults: a cross-sectional study from the physical activity measurement study project.

    Science.gov (United States)

    Kim, Youngwon; Welk, Gregory J

    2015-12-09

    Research has clearly demonstrated that excess time spent on sedentary behavior (SB) increases health risks in the population. However, the lack of information on the context of SB in the population prevents a detailed understanding of sedentary lifestyles. The purpose of this study was to characterize the context of SB in a representative sample of adults and to examine differences across various socio-demographic indicators. A diverse sample of 1442 adults (ages 20-71 year) completed an interviewer-administered 24-h activity recall to provide detailed information about the time, type and location of the previous day's activities. All reported activities were matched with MET scores from the Compendium of Physical Activity but only SB (i.e., METS Work: 27.5%, Community: 24.8%, Home/Indoor: 20.5%, Home/Outdoor: 15.8%, and Transportation: 11.3%). Patterns of SB allocations varied considerably across different socio-demographic indicators indicating the extreme variability in SB in the population. The findings provide unique insights about the context of SB at the population level, and can serve as a guide for developing intervention/policy studies to reduce sedentary time and minimize disparities in SB.

  15. Associations between Delinquency and Suicidal Behaviors in a Nationally Representative Sample of Adolescents

    Science.gov (United States)

    Thompson, Martie P.; Kingree, J. B.; Ho, Ching-hua

    2006-01-01

    Suicide was the second leading cause of death for 14-17 years olds in 2002. Prior studies indicate that suicidal behaviors are especially common among juvenile delinquents, yet this association has not been examined in a national sample. The 2003 Youth Risk Behavior Surveillance System was used to examine associations between suicidal behaviors…

  16. Large-volume constant-concentration sampling technique coupling with surface-enhanced Raman spectroscopy for rapid on-site gas analysis.

    Science.gov (United States)

    Zhang, Zhuomin; Zhan, Yisen; Huang, Yichun; Li, Gongke

    2017-08-05

    In this work, a portable large-volume constant-concentration (LVCC) sampling technique coupling with surface-enhanced Raman spectroscopy (SERS) was developed for the rapid on-site gas analysis based on suitable derivatization methods. LVCC sampling technique mainly consisted of a specially designed sampling cell including the rigid sample container and flexible sampling bag, and an absorption-derivatization module with a portable pump and a gas flowmeter. LVCC sampling technique allowed large, alterable and well-controlled sampling volume, which kept the concentration of gas target in headspace phase constant during the entire sampling process and made the sampling result more representative. Moreover, absorption and derivatization of gas target during LVCC sampling process were efficiently merged in one step using bromine-thiourea and OPA-NH 4 + strategy for ethylene and SO 2 respectively, which made LVCC sampling technique conveniently adapted to consequent SERS analysis. Finally, a new LVCC sampling-SERS method was developed and successfully applied for rapid analysis of trace ethylene and SO 2 from fruits. It was satisfied that trace ethylene and SO 2 from real fruit samples could be actually and accurately quantified by this method. The minor concentration fluctuations of ethylene and SO 2 during the entire LVCC sampling process were proved to be gas targets from real samples by SERS. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Sampling in practice

    DEFF Research Database (Denmark)

    Esbensen, Kim Harry; Petersen, Lars

    2005-01-01

    A basic knowledge of the Theory of Sampling (TOS) and a set of only eight sampling unit operations is all the practical sampler needs to ensure representativeness of samples extracted from all kinds of lots: production batches, - truckloads, - barrels, sub-division in the laboratory, sampling...... in nature and in the field (environmental sampling, forestry, geology, biology), from raw materials or manufactory processes etc. We here can only give a brief introduction to the Fundamental Sampling Principle (FSP) and these eight Sampling Unit Operations (SUO’s). Always respecting FSP and invoking only...... the necessary SUO’s (dependent on the practical situation) is the only prerequisite needed for eliminating all sampling bias and simultaneously minimizing sampling variance, and this is in addition a sure guarantee for making the final analytical results trustworthy. No reliable conclusions can be made unless...

  18. OSM-Classic : An optical imaging technique for accurately determining strain

    Science.gov (United States)

    Aldrich, Daniel R.; Ayranci, Cagri; Nobes, David S.

    OSM-Classic is a program designed in MATLAB® to provide a method of accurately determining strain in a test sample using an optical imaging technique. Measuring strain for the mechanical characterization of materials is most commonly performed with extensometers, LVDT (linear variable differential transistors), and strain gauges; however, these strain measurement methods suffer from their fragile nature and it is not particularly easy to attach these devices to the material for testing. To alleviate these potential problems, an optical approach that does not require contact with the specimen can be implemented to measure the strain. OSM-Classic is a software that interrogates a series of images to determine elongation in a test sample and hence, strain of the specimen. It was designed to provide a graphical user interface that includes image processing with a dynamic region of interest. Additionally, the stain is calculated directly while providing active feedback during the processing.

  19. Investigation of representing hysteresis in macroscopic models of two-phase flow in porous media using intermediate scale experimental data

    Science.gov (United States)

    Cihan, Abdullah; Birkholzer, Jens; Trevisan, Luca; Gonzalez-Nicolas, Ana; Illangasekare, Tissa

    2017-01-01

    Incorporating hysteresis into models is important to accurately capture the two phase flow behavior when porous media systems undergo cycles of drainage and imbibition such as in the cases of injection and post-injection redistribution of CO2 during geological CO2 storage (GCS). In the traditional model of two-phase flow, existing constitutive models that parameterize the hysteresis associated with these processes are generally based on the empirical relationships. This manuscript presents development and testing of mathematical hysteretic capillary pressure—saturation—relative permeability models with the objective of more accurately representing the redistribution of the fluids after injection. The constitutive models are developed by relating macroscopic variables to basic physics of two-phase capillary displacements at pore-scale and void space distribution properties. The modeling approach with the developed constitutive models with and without hysteresis as input is tested against some intermediate-scale flow cell experiments to test the ability of the models to represent movement and capillary trapping of immiscible fluids under macroscopically homogeneous and heterogeneous conditions. The hysteretic two-phase flow model predicted the overall plume migration and distribution during and post injection reasonably well and represented the postinjection behavior of the plume more accurately than the nonhysteretic models. Based on the results in this study, neglecting hysteresis in the constitutive models of the traditional two-phase flow theory can seriously overpredict or underpredict the injected fluid distribution during post-injection under both homogeneous and heterogeneous conditions, depending on the selected value of the residual saturation in the nonhysteretic models.

  20. How accurately can other people infer your thoughts—And does culture matter?

    Science.gov (United States)

    Valanides, Constantinos; Sheppard, Elizabeth; Mitchell, Peter

    2017-01-01

    This research investigated how accurately people infer what others are thinking after observing a brief sample of their behaviour and whether culture/similarity is a relevant factor. Target participants (14 British and 14 Mediterraneans) were cued to think about either positive or negative events they had experienced. Subsequently, perceiver participants (16 British and 16 Mediterraneans) watched videos of the targets thinking about these things. Perceivers (both groups) were significantly accurate in judging when targets had been cued to think of something positive versus something negative, indicating notable inferential ability. Additionally, Mediterranean perceivers were better than British perceivers in making such inferences, irrespective of nationality of the targets, something that was statistically accounted for by corresponding group differences in levels of independently measured collectivism. The results point to the need for further research to investigate the possibility that being reared in a collectivist culture fosters ability in interpreting others’ behaviour. PMID:29112972

  1. How accurately can other people infer your thoughts-And does culture matter?

    Science.gov (United States)

    Valanides, Constantinos; Sheppard, Elizabeth; Mitchell, Peter

    2017-01-01

    This research investigated how accurately people infer what others are thinking after observing a brief sample of their behaviour and whether culture/similarity is a relevant factor. Target participants (14 British and 14 Mediterraneans) were cued to think about either positive or negative events they had experienced. Subsequently, perceiver participants (16 British and 16 Mediterraneans) watched videos of the targets thinking about these things. Perceivers (both groups) were significantly accurate in judging when targets had been cued to think of something positive versus something negative, indicating notable inferential ability. Additionally, Mediterranean perceivers were better than British perceivers in making such inferences, irrespective of nationality of the targets, something that was statistically accounted for by corresponding group differences in levels of independently measured collectivism. The results point to the need for further research to investigate the possibility that being reared in a collectivist culture fosters ability in interpreting others' behaviour.

  2. Teknik Sampling Snowball dalam Penelitian Lapangan

    Directory of Open Access Journals (Sweden)

    Nina Nurdiani

    2014-12-01

    Full Text Available Field research can be associated with both qualitative and quantitative research methods, depending on the problems faced and the goals to be achieved. The success of data collection in the field research depends on the determination of the appropriate sampling technique, to obtain accurate data, and reliably. In studies that have problems related to specific issues, requiring a non-probability sampling techniques one of which is the snowball sampling technique. This technique is useful for finding, identifying, selecting and taking samples in a network or chain of relationships. Phased implementation procedures performed through interviews and questionnaires. Snowball sampling technique has strengths and weaknesses in its application. Field research housing sector become the case study to explain this sampling technique.

  3. Dietary predictors of childhood obesity in a representative sample of children in north east of Iran.

    Science.gov (United States)

    Baygi, Fereshteh; Qorbani, Mostafa; Dorosty, Ahmad Reza; Kelishadi, Roya; Asayesh, Hamid; Rezapour, Aziz; Mohammadi, Younes; Mohammadi, Fatemeh

    2013-07-01

    The prevalence of obesity is increasing in Iranian youngsters. This study aimed to assess some dietary determinants of obesity in a representative sample of children in Neishabour, a city in northeastern, Iran. This case-control study was conducted among 114 school students, aged 6-12 years, with a body mass index (BMI) ≥95th (based on percentile of Iranian children) as the case group and 102 age- and gender-matched controls, who were selected from their non-obese classmates. Nutrient intake data were collected by trained nutritionists by using two 24-hour-dietary recalls through maternal interviews in the presence of their child. A food frequency questionnaire was used for detecting the snack consumption patterns. Statistical analysis was done using univariate and multivariate logistic regression (MLR) by SPSS version 16. In univariate logistic regression, total energy, protein, carbohydrate, fat (including saturated, mono- and poly-unsaturated fat), and dietary fiber were the positive predictors of obesity in studied children. The estimated crude ORs for frequency of corn-based extruded snacks, carbonated beverages, potato chips, fast foods, and chocolate consumption were statistically significant. After MLR analysis, the association of obesity remained significant with energy intake (OR = 2.489, 95%CI: 1.667-3.716), frequency of corn-based extruded snacks (OR = 1.122, 95%CI: 1.007-1.250), and potato chips (OR = 1.143, 95%CI:1.024-1.276). The MLR analysis showed that dietary fiber (OR = 0.601, 95%CI: 0.368-0.983) and natural fruit juice intake (OR = 0.909, 95%CI: 0.835-0.988) were protective factors against obesity. The findings serve to confirm the role of an unhealthy diet, notably calorie-dense snacks, in childhood obesity. Healthy dietary habits, such as the consumption of high-fiber foods, should be encouraged among children.

  4. A neural algorithm for the non-uniform and adaptive sampling of biomedical data.

    Science.gov (United States)

    Mesin, Luca

    2016-04-01

    Body sensors are finding increasing applications in the self-monitoring for health-care and in the remote surveillance of sensitive people. The physiological data to be sampled can be non-stationary, with bursts of high amplitude and frequency content providing most information. Such data could be sampled efficiently with a non-uniform schedule that increases the sampling rate only during activity bursts. A real time and adaptive algorithm is proposed to select the sampling rate, in order to reduce the number of measured samples, but still recording the main information. The algorithm is based on a neural network which predicts the subsequent samples and their uncertainties, requiring a measurement only when the risk of the prediction is larger than a selectable threshold. Four examples of application to biomedical data are discussed: electromyogram, electrocardiogram, electroencephalogram, and body acceleration. Sampling rates are reduced under the Nyquist limit, still preserving an accurate representation of the data and of their power spectral densities (PSD). For example, sampling at 60% of the Nyquist frequency, the percentage average rectified errors in estimating the signals are on the order of 10% and the PSD is fairly represented, until the highest frequencies. The method outperforms both uniform sampling and compressive sensing applied to the same data. The discussed method allows to go beyond Nyquist limit, still preserving the information content of non-stationary biomedical signals. It could find applications in body sensor networks to lower the number of wireless communications (saving sensor power) and to reduce the occupation of memory. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. SAMPLING IN EXTERNAL AUDIT - THE MONETARY UNIT SAMPLING METHOD

    Directory of Open Access Journals (Sweden)

    E. Dascalu

    2016-12-01

    Full Text Available This article approaches the general issue of diminishing the evidence investigation space in audit activities, by means of sampling techniques, given that in the instance of a significant data volume an exhaustive examination of the assessed popula¬tion is not possible and/or effective. The general perspective of the presentation involves dealing with sampling risk, in essence, the risk that a selected sample may not be representative for the overall population, in correlation with the audit risk model and with the component parts of this model (inherent risk, control risk and non detection risk and highlights the inter-conditionings between these two models.

  6. Evaluation of biomass fuel sampling in heat and power plants; Utvaerdering av mekanisk och manuell provtagning av biobraensle vid energiverk

    Energy Technology Data Exchange (ETDEWEB)

    Werkelin, R [Norrkoeping Energi AB (Sweden); Ryk, L [SGS Solid Fuels AB (Sweden)

    1996-06-01

    This report describes bias-test of manual and mechanical sampling systems of bio-fuels at 6 Swedish plants. Two parallel series of 30 samples each were taken at each plant. One series of samples was taken by the normal procedure. The samples of the other series were taken by a reference method. Either by stopped belt and taking a full cut using a sampling frame or by manual increment division of a whole truck-load was used with the assistance of a pay-loader. The rectangular pile formed was divided in 120 squares. Some of the sampling systems gave biased samples. This was due to drawing too small increments, having too small openings of the sampling tools and making errors in sample preparation. Determination of moisture was more accurate than determination of ash content. Ash is more heterogeneously distributed in biofuels than moisture. Ash bearing components as clay or stone segregate easily. Although the project has not been able to show that mechanical sampling gives a more representative moisture sampling than manual sampling, it is recommended to invest in mechanical sampling if possible. The reason for this is to reduce the risk of human error and for safety reasons. 14 refs, figs, tabs, photos

  7. An accurate measurement of the baryonic Tully-Fisher relation with heavily gas-dominated ALFALFA galaxies

    NARCIS (Netherlands)

    Papastergis, E.; Adams, E. A. K.; van der Hulst, J. M.

    2016-01-01

    We use a sample of 97 galaxies selected from the Arecibo legacy fast ALFA (ALFALFA) 21 cm survey to make an accurate measurement of the baryonic Tully-Fisher relation (BTFR). These galaxies are specifically selected to be heavily gas-dominated (Mgas/M∗ ≳ 2.7) and to be oriented edge-on. The former

  8. Smoking and its risk factors in Chinese elementary and middle school students: a nationally representative sample study.

    Science.gov (United States)

    Zhang, Xinghui; Li, Yajun; Zhang, Qin; Lu, Furong; Wang, Yun

    2014-05-01

    The purpose of this study was to examine the prevalence of smoking in a nationally representative sample of Chinese elementary and middle school students and to investigate its risk factors from families and schools. The data were from the National Children's Study of China (NCSC), in which 24,013 fourth- to ninth-grade students were recruited from 100 counties in 31 provinces in China. Chi-square tests and one-way ANOVAs were used to analyze the relationships between smoking and the risk factors. Logistic regressions were used to calculate odds ratios. The prevalence of ever smokers and current smokers were 19.0% and 5.4%. Focusing on current smokers, boys, middle school students, rural students, boarding students, non-only children and those owning parents with low educational levels reported smoking significantly more than girls, elementary school students, urban students, non-boarding students, only children and those owning parents with high educational levels. Lower trust and support from teachers and higher parent-child conflict positively predicted both smoking and smoking frequency. Lower trust and support from classmates was associated with higher possibility of smoking. However, higher trust and support from classmates was associated with higher smoking frequency. Teacher smoking and friend smoking were only predictive of smoking, but not of smoking frequency. Boys, middle school students, rural students, boarding students, non-only children and those owning parents with low educational levels need special attention. The most risk factors for smoking and smoking frequency were lower trust and support from teachers and higher parent-child conflict. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Dispersive liquid-liquid microextraction and gas chromatography accurate mass spectrometry for extraction and non-targeted profiling of volatile and semi-volatile compounds in grape marc distillates.

    Science.gov (United States)

    Fontana, Ariel; Rodríguez, Isaac; Cela, Rafael

    2018-04-20

    The suitability of dispersive liquid-liquid microextraction (DLLME) and gas chromatography accurate mass spectrometry (GC-MS), based on a time-of-flight (TOF) MS analyzer and using electron ionization (EI), for the characterization of volatile and semi-volatile profiles of grape marc distillates (grappa) are evaluated. DLLME conditions are optimized with a selection of compounds, from different chemical families, present in the distillate spirit. Under final working conditions, 2.5 mL of sample and 0.5 mL of organic solvents are consumed in the sample preparation process. The absolute extraction efficiencies ranged from 30 to 100%, depending on the compound. For the same sample volume, DLLME provided higher responses than solid-phase microextraction (SPME) for most of the model compounds. The GC-EI-TOF-MS records of grappa samples were processed using a data mining non-targeted search algorithm. In this way, chromatographic peaks and accurate EI-MS spectra of sample components were linked. The identities of more than 140 of these components are proposed from comparison of their accurate spectra with those in a low resolution EI-MS database, accurate masses of most intense fragment ions of known structure, and available chromatographic retention index. The use of chromatographic and spectral data, associated to the set of components mined from different grappa samples, for multivariate analysis purposes is also illustrated in the study. Copyright © 2018 Elsevier B.V. All rights reserved.

  10. On the development of automatic sample preparation devices

    International Nuclear Information System (INIS)

    Oesselmann, J.

    1987-01-01

    Modern mass spectrometers for stable isotope analysis offer accurate isotope ratio results from gaseous samples (CO 2 , N 2 , H 2 , SO 2 ) in a completely automated fashion. However, most samples of interest either are associated with contaminant gases or the gas has to be liberated by a chemical procedure prior to measurement. In most laboratories this sample preparation step is performed manually. As a consequence, sample throughput is rather low and - despite skilful operation - the preparation procedure varies slightly from one sample to the next affecting mainly the reproducibility of the data. (author)

  11. Rapid and Accurate Behavioral Health Diagnostic Screening: Initial Validation Study of a Web-Based, Self-Report Tool (the SAGE-SR).

    Science.gov (United States)

    Brodey, Benjamin; Purcell, Susan E; Rhea, Karen; Maier, Philip; First, Michael; Zweede, Lisa; Sinisterra, Manuela; Nunn, M Brad; Austin, Marie-Paule; Brodey, Inger S

    2018-03-23

    The Structured Clinical Interview for DSM (SCID) is considered the gold standard assessment for accurate, reliable psychiatric diagnoses; however, because of its length, complexity, and training required, the SCID is rarely used outside of research. This paper aims to describe the development and initial validation of a Web-based, self-report screening instrument (the Screening Assessment for Guiding Evaluation-Self-Report, SAGE-SR) based on the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) and the SCID-5-Clinician Version (CV) intended to make accurate, broad-based behavioral health diagnostic screening more accessible within clinical care. First, study staff drafted approximately 1200 self-report items representing individual granular symptoms in the diagnostic criteria for the 8 primary SCID-CV modules. An expert panel iteratively reviewed, critiqued, and revised items. The resulting items were iteratively administered and revised through 3 rounds of cognitive interviewing with community mental health center participants. In the first 2 rounds, the SCID was also administered to participants to directly compare their Likert self-report and SCID responses. A second expert panel evaluated the final pool of items from cognitive interviewing and criteria in the DSM-5 to construct the SAGE-SR, a computerized adaptive instrument that uses branching logic from a screener section to administer appropriate follow-up questions to refine the differential diagnoses. The SAGE-SR was administered to healthy controls and outpatient mental health clinic clients to assess test duration and test-retest reliability. Cutoff scores for screening into follow-up diagnostic sections and criteria for inclusion of diagnoses in the differential diagnosis were evaluated. The expert panel reduced the initial 1200 test items to 664 items that panel members agreed collectively represented the SCID items from the 8 targeted modules and DSM criteria for the covered

  12. Representativeness and seasonality of major ion records derived from NEEM firn cores

    Directory of Open Access Journals (Sweden)

    G. Gfeller

    2014-10-01

    Full Text Available The seasonal and annual representativeness of ionic aerosol proxies (among others, calcium, sodium, ammonium and nitrate in various firn cores in the vicinity of the NEEM drill site in northwest Greenland have been assessed. Seasonal representativeness is very high as one core explains more than 60% of the variability within the area. The inter-annual representativeness, however, can be substantially lower (depending on the species making replicate coring indispensable to derive the atmospheric variability of aerosol species. A single core at the NEEM site records only 30% of the inter-annual atmospheric variability in some species, while five replicate cores are already needed to cover approximately 70% of the inter-annual atmospheric variability in all species. The spatial representativeness is very high within 60 cm, rapidly decorrelates within 10 m but does not diminish further within 3 km. We attribute this to wind reworking of the snow pack leading to sastrugi formation. Due to the high resolution and seasonal representativeness of the records we can derive accurate seasonalities of the measured species for modern (AD 1990–2010 times as well as for pre-industrial (AD 1623–1750 times. Sodium and calcium show similar seasonality (peaking in February and March respectively for modern and pre-industrial times, whereas ammonium and nitrate are influenced by anthropogenic activities. Nitrate and ammonium both peak in May during modern times, whereas during pre-industrial times ammonium peaked during July–August and nitrate during June–July.

  13. MULTI-K: accurate classification of microarray subtypes using ensemble k-means clustering

    Directory of Open Access Journals (Sweden)

    Ashlock Daniel

    2009-08-01

    Full Text Available Abstract Background Uncovering subtypes of disease from microarray samples has important clinical implications such as survival time and sensitivity of individual patients to specific therapies. Unsupervised clustering methods have been used to classify this type of data. However, most existing methods focus on clusters with compact shapes and do not reflect the geometric complexity of the high dimensional microarray clusters, which limits their performance. Results We present a cluster-number-based ensemble clustering algorithm, called MULTI-K, for microarray sample classification, which demonstrates remarkable accuracy. The method amalgamates multiple k-means runs by varying the number of clusters and identifies clusters that manifest the most robust co-memberships of elements. In addition to the original algorithm, we newly devised the entropy-plot to control the separation of singletons or small clusters. MULTI-K, unlike the simple k-means or other widely used methods, was able to capture clusters with complex and high-dimensional structures accurately. MULTI-K outperformed other methods including a recently developed ensemble clustering algorithm in tests with five simulated and eight real gene-expression data sets. Conclusion The geometric complexity of clusters should be taken into account for accurate classification of microarray data, and ensemble clustering applied to the number of clusters tackles the problem very well. The C++ code and the data sets tested are available from the authors.

  14. MULTI-K: accurate classification of microarray subtypes using ensemble k-means clustering.

    Science.gov (United States)

    Kim, Eun-Youn; Kim, Seon-Young; Ashlock, Daniel; Nam, Dougu

    2009-08-22

    Uncovering subtypes of disease from microarray samples has important clinical implications such as survival time and sensitivity of individual patients to specific therapies. Unsupervised clustering methods have been used to classify this type of data. However, most existing methods focus on clusters with compact shapes and do not reflect the geometric complexity of the high dimensional microarray clusters, which limits their performance. We present a cluster-number-based ensemble clustering algorithm, called MULTI-K, for microarray sample classification, which demonstrates remarkable accuracy. The method amalgamates multiple k-means runs by varying the number of clusters and identifies clusters that manifest the most robust co-memberships of elements. In addition to the original algorithm, we newly devised the entropy-plot to control the separation of singletons or small clusters. MULTI-K, unlike the simple k-means or other widely used methods, was able to capture clusters with complex and high-dimensional structures accurately. MULTI-K outperformed other methods including a recently developed ensemble clustering algorithm in tests with five simulated and eight real gene-expression data sets. The geometric complexity of clusters should be taken into account for accurate classification of microarray data, and ensemble clustering applied to the number of clusters tackles the problem very well. The C++ code and the data sets tested are available from the authors.

  15. Comparison of soil solution sampling techniques to assess metal fluxes from contaminated soil to groundwater.

    Science.gov (United States)

    Coutelot, F; Sappin-Didier, V; Keller, C; Atteia, O

    2014-12-01

    The unsaturated zone plays a major role in elemental fluxes in terrestrial ecosystems. A representative chemical analysis of soil pore water is required for the interpretation of soil chemical phenomena and particularly to assess Trace Elements (TEs) mobility. This requires an optimal sampling system to avoid modification of the extracted soil water chemistry and allow for an accurate estimation of solute fluxes. In this paper, the chemical composition of soil solutions sampled by Rhizon® samplers connected to a standard syringe was compared to two other types of suction probes (Rhizon® + vacuum tube and Rhizon® + diverted flow system). We investigated the effects of different vacuum application procedures on concentrations of spiked elements (Cr, As, Zn) mixed as powder into the first 20 cm of 100-cm columns and non-spiked elements (Ca, Na, Mg) concentrations in two types of columns (SiO2 sand and a mixture of kaolinite + SiO2 sand substrates). Rhizon® was installed at different depths. The metals concentrations showed that (i) in sand, peak concentrations cannot be correctly sampled, thus the flux cannot be estimated, and the errors can easily reach a factor 2; (ii) in sand + clay columns, peak concentrations were larger, indicating that they could be sampled but, due to sorption on clay, it was not possible to compare fluxes at different depths. The different samplers tested were not able to reflect the elemental flux to groundwater and, although the Rhizon® + syringe device was more accurate, the best solution remains to be the use of a lysimeter, whose bottom is kept continuously at a suction close to the one existing in the soil.

  16. Demonstration of disinfection procedure for the development of accurate blood glucose meters in accordance with ISO 15197:2013

    Science.gov (United States)

    Lin, Wen-Ye; Chang, Jung-Tzu; Chu, Chun-Feng

    2017-01-01

    Despite measures to reduce disease transmission, a risk can occur when blood glucose meters (BGMs) are used on multiple individuals or by caregivers assisting a patient. The laboratory and in-clinic performance of a BGM system before and after disinfection should be demonstrated to guarantee accurate readings and reliable control of blood glucose (BG) for patients. In this study, an effective disinfection procedure, conducting wiping 10 times to assure a one minute contact time of the disinfectant on contaminated surface, was first demonstrated using test samples of the meter housing materials, including acrylonitrile butadiene styrene (ABS), polymethyl methacrylate (PMMA), and polycarbonate (PC), in accordance with ISO 15197:2013. After bench studies comprising 10,000 disinfection cycles, the elemental compositions of the disinfected ABS, PMMA, and PC samples were almost the same as in the original samples, as indicated by electron spectroscopy for chemical analysis. Subsequently, the validated disinfection procedure was then directly applied to disinfect 5 commercial BGM systems composed of ABS, PMMA, or PC to observe the effect of the validated disinfection procedure on meter accuracy. The results of HBsAg values after treatment with HBV sera and disinfectant wipes for each material were less than the LoD of each material of 0.020 IU/mL. Before and after the multiple disinfection cycles, 900 of 900 samples (100%) were within the system accuracy requirements of ISO 15197:2013. All of the systems showed high performance before and after the series of disinfection cycles and met the ISO 15197:2013 requirements. In addition, our results demonstrated multiple cleaning and disinfection cycles that represented normal use over the lifetime of a meter of 3–5 years. Our validated cleaning and disinfection procedure can be directly applied to other registered disinfectants for cleaning commercial BGM products in the future. PMID:28683148

  17. Operationalization and Validation of the Stopping Elderly Accidents, Deaths, and Injuries (STEADI) Fall Risk Algorithm in a Nationally Representative Sample

    Science.gov (United States)

    Lohman, Matthew C.; Crow, Rebecca S.; DiMilia, Peter R.; Nicklett, Emily J.; Bruce, Martha L.; Batsis, John A.

    2017-01-01

    Background Preventing falls and fall-related injuries among older adults is a public health priority. The Stopping Elderly Accidents, Deaths, and Injuries (STEADI) tool was developed to promote fall risk screening and encourage coordination between clinical and community-based fall prevention resources; however, little is known about the tool’s predictive validity or adaptability to survey data. Methods Data from five annual rounds (2011–2015) of the National Health and Aging Trends Study (NHATS), a representative cohort of adults age 65 and older in the US. Analytic sample respondents (n=7,392) were categorized at baseline as having low, moderate, or high fall risk according to the STEADI algorithm adapted for use with NHATS data. Logistic mixed-effects regression was used to estimate the association between baseline fall risk and subsequent falls and mortality. Analyses incorporated complex sampling and weighting elements to permit inferences at a national level. Results Participants classified as having moderate and high fall risk had 2.62 (95% CI: 2.29, 2.99) and 4.76 (95% CI: 3.51, 6.47) times greater odds of falling during follow-up compared to those with low risk, respectively, controlling for sociodemographic and health related risk factors for falls. High fall risk was also associated with greater likelihood of falling multiple times annually but not with greater risk of mortality. Conclusion The adapted STEADI clinical fall risk screening tool is a valid measure for predicting future fall risk using survey cohort data. Further efforts to standardize screening for fall risk and to coordinate between clinical and community-based fall prevention initiatives are warranted. PMID:28947669

  18. Measuring nanocurie quantities of tritium bred in metallic lithium and lithium oxide samples

    International Nuclear Information System (INIS)

    Bertone, P.C.

    1985-01-01

    The LBM program requires that nanocurie quantities of tritium, bred in both lithium oxide pellets and lithium samples, be measured with an uncertainty not exceeding + or - 6%. Two methods of accurately measuring nanocurie quantities of tritium bred in LBM lithium oxide pellets and one method of accurately measuring nanocurie quantities of tritium bred in lithium samples are described. Potential errors associated with these tritium measurement techniques are also discussed

  19. Robust weak measurements on finite samples

    International Nuclear Information System (INIS)

    Tollaksen, Jeff

    2007-01-01

    A new weak measurement procedure is introduced for finite samples which yields accurate weak values that are outside the range of eigenvalues and which do not require an exponentially rare ensemble. This procedure provides a unique advantage in the amplification of small nonrandom signals by minimizing uncertainties in determining the weak value and by minimizing sample size. This procedure can also extend the strength of the coupling between the system and measuring device to a new regime

  20. Out-of-Pocket Expenditures on Complementary Health Approaches Associated with Painful Health Conditions in a Nationally Representative Adult Sample

    Science.gov (United States)

    Nahin, Richard L.; Stussman, Barbara J.; Herman, Patricia M.

    2015-01-01

    National surveys suggest that millions of adults in the United States use complementary health approaches such as acupuncture, chiropractic manipulation, and herbal medicines to manage painful conditions such as arthritis, back pain and fibromyalgia. Yet, national and per person out-of-pocket (OOP) costs attributable to this condition-specific use are unknown. In the 2007 National Health Interview Survey, use of complementary health approaches, reasons for this use, and associated OOP costs were captured in a nationally representative sample of 5,467 adults. Ordinary least square regression models that controlled for co-morbid conditions were used to estimate aggregate and per person OOP costs associated with 14 painful health conditions. Individuals using complementary approaches spent a total of $14.9 billion (S.E. $0.9 billion) OOP on these approaches to manage these painful conditions. Total OOP expenditures seen in those using complementary approaches for their back pain ($8.7 billion, S.E. $0.8 billion) far outstripped that of any other condition, with the majority of these costs ($4.7 billion, S.E. $0.4 billion) resulting from visits to complementary providers. Annual condition-specific per-person OOP costs varied from a low of $568 (SE $144) for regular headaches, to a high of $895 (SE $163) for fibromyalgia. PMID:26320946

  1. Standard practices for sampling uranium-Ore concentrate

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These practices are intended to provide the nuclear industry with procedures for obtaining representative bulk samples from uranium-ore concentrates (UOC) (see Specification C967). 1.2 These practices also provide for obtaining a series of representative secondary samples from the original bulk sample for the determination of moisture and other test purposes, and for the preparation of pulverized analytical samples (see Test Methods C1022). 1.3 These practices consist of a number of alternative procedures for sampling and sample preparation which have been shown to be satisfactory through long experience in the nuclear industry. These procedures are described in the following order. Stage Procedure Section Primary Sampling One-stage falling stream 4 Two-stage falling stream 5 Auger 6 Secondary Sampling Straight-path (reciprocating) 7 Rotating (Vezin) 8, 9 Sample Preparation 10 Concurrent-drying 11-13 Natural moisture 14-16 Calcination 17, 18 Sample Packaging 19 Wax s...

  2. Mental health and resiliency following 44 months of terrorism: a survey of an Israeli national representative sample

    Science.gov (United States)

    Bleich, Avi; Gelkopf, Marc; Melamed, Yuval; Solomon, Zahava

    2006-01-01

    Background Israeli citizens have been exposed to intense and ongoing terrorism since September 2000. We previously studied the mental health impact of terrorism on the Israeli population (Bleich et al., 2002), however the long-term impact of ongoing terrorism has not yet been examined. The present study evaluated the psychological sequelae of 44 months of terrorism in Israel, and sought to identify factors that may contribute to vulnerability and resilience. Methods This was a telephone survey using strata sampling of 828 households, which reached a representative sample of 702 adult Israeli residents (84.8% contact rate). In total, 501 people (60.5%) agreed to participate. The methodology was similar to that of our previous study. Exposure to terrorism and other traumatic events, number of traumatic stress-related symptoms (TSRS), percentage of respondents with symptom criteria for post-traumatic stress disorder (PTSD), traumatic stress (TS) resiliency and feelings of depression, anxiety, optimism, sense of safety, and help-seeking were the main outcome measures. Results In total, 56 participants (11.2%) were directly exposed to a terrorist incident, and 101 (20.2%) had family members or friends exposed. Respondents reported a mean ± SD of 5.0 ± 4.5 TSRS; 45 (9%) met symptom criteria for PTSD; and 72 (14.4%) were TS-resilient. There were 147 participants (29.5%) who felt depressed, 50 (10.4%) felt anxious, and almost half (235; 47%) felt life-threatening danger; 48 (9.7%) felt the need for professional help. Women and people of Arab ethnicity had more TSRS, more PTSD, and less TS resiliency. Injury following a life-threatening experience, a major stressful life event, and a major loss of income were associated with PTSD. Immigrant status, lower education, low sense of safety, low sense of social support, high societal distress, and injury following life-threatening experiences were associated with TSRS. TSRS did not increase with exposure severity. This study

  3. [Extracting THz absorption coefficient spectrum based on accurate determination of sample thickness].

    Science.gov (United States)

    Li, Zhi; Zhang, Zhao-hui; Zhao, Xiao-yan; Su, Hai-xia; Yan, Fang

    2012-04-01

    Extracting absorption spectrum in THz band is one of the important aspects in THz applications. Sample's absorption coefficient has a complex nonlinear relationship with its thickness. However, as it is not convenient to measure the thickness directly, absorption spectrum is usually determined incorrectly. Based on the method proposed by Duvillaret which was used to precisely determine the thickness of LiNbO3, the approach to measuring the absorption coefficient spectra of glutamine and histidine in frequency range from 0.3 to 2.6 THz(1 THz = 10(12) Hz) was improved in this paper. In order to validate the correctness of this absorption spectrum, we designed a series of experiments to compare the linearity of absorption coefficient belonging to one kind amino acid in different concentrations. The results indicate that as agreed by Lambert-Beer's Law, absorption coefficient spectrum of amino acid from the improved algorithm performs better linearity with its concentration than that from the common algorithm, which can be the basis of quantitative analysis in further researches.

  4. Rapid and accurate biofuel moisture content gauging using magnetic resonance measurement technology

    Energy Technology Data Exchange (ETDEWEB)

    Jaervinen, T.

    2013-04-15

    Biomass is extensively utilised in energy production and as a raw material, such as for the production of liquid biofuels. All those processes will benefit if the moisture content of bio material is known in advance as accurately as possible under transient circumstances. Biofuel trade is increasingly based on the calorific value of fuels. In the first step, this also increases the need for rapid and accurate moisture content determination. During the last few years, large biofuel standardisation has been implemented, emphasising biofuel quality control at all stages of the utilisation chain. In principle, the moisture instrumental measurement can be utilised by many technologies and procedures. Typical techniques are infrared, radiofrequency, microwave, radiometric, electrical conductivity, capacitance, and impedance. Nuclear magnetic resonance (MR) and thermal neutron absorption are also applied. The MR measurement principle has been known and utilised already since the early 1950s. It has become the basic instrumental analysis tool in chemistry. It is also well-known as a very accurate method for analysing most compounds, especially substances containing hydrogen. The utilisation of MR metering is expanded extensively to medical diagnostics as a form of magnetic resonance imaging (MRI). Because of the precision of the MR principle, there have for a long time been efforts to apply it in new and different areas, and to make more user-friendly, smaller, and even portable devices. Such a device was designed by Vaisala a few years ago. VTT has utilised Vaisala's MR prototype for approximately one year for moisture content measurement of different biofuels. The first step in the use of an MR device for moisture determination was the definition of its measurement accuracy compared to the standard method (EN 14774). Those tests proved that the absolute precision seems to be comparable to the standard moisture content measurement method. It was also found out that

  5. Automated selected reaction monitoring software for accurate label-free protein quantification.

    Science.gov (United States)

    Teleman, Johan; Karlsson, Christofer; Waldemarson, Sofia; Hansson, Karin; James, Peter; Malmström, Johan; Levander, Fredrik

    2012-07-06

    Selected reaction monitoring (SRM) is a mass spectrometry method with documented ability to quantify proteins accurately and reproducibly using labeled reference peptides. However, the use of labeled reference peptides becomes impractical if large numbers of peptides are targeted and when high flexibility is desired when selecting peptides. We have developed a label-free quantitative SRM workflow that relies on a new automated algorithm, Anubis, for accurate peak detection. Anubis efficiently removes interfering signals from contaminating peptides to estimate the true signal of the targeted peptides. We evaluated the algorithm on a published multisite data set and achieved results in line with manual data analysis. In complex peptide mixtures from whole proteome digests of Streptococcus pyogenes we achieved a technical variability across the entire proteome abundance range of 6.5-19.2%, which was considerably below the total variation across biological samples. Our results show that the label-free SRM workflow with automated data analysis is feasible for large-scale biological studies, opening up new possibilities for quantitative proteomics and systems biology.

  6. Computer-based personality judgments are more accurate than those made by humans.

    Science.gov (United States)

    Youyou, Wu; Kosinski, Michal; Stillwell, David

    2015-01-27

    Judging others' personalities is an essential skill in successful social living, as personality is a key driver behind people's interactions, behaviors, and emotions. Although accurate personality judgments stem from social-cognitive skills, developments in machine learning show that computer models can also make valid judgments. This study compares the accuracy of human and computer-based personality judgments, using a sample of 86,220 volunteers who completed a 100-item personality questionnaire. We show that (i) computer predictions based on a generic digital footprint (Facebook Likes) are more accurate (r = 0.56) than those made by the participants' Facebook friends using a personality questionnaire (r = 0.49); (ii) computer models show higher interjudge agreement; and (iii) computer personality judgments have higher external validity when predicting life outcomes such as substance use, political attitudes, and physical health; for some outcomes, they even outperform the self-rated personality scores. Computers outpacing humans in personality judgment presents significant opportunities and challenges in the areas of psychological assessment, marketing, and privacy.

  7. How accurately can other people infer your thoughts-And does culture matter?

    Directory of Open Access Journals (Sweden)

    Constantinos Valanides

    Full Text Available This research investigated how accurately people infer what others are thinking after observing a brief sample of their behaviour and whether culture/similarity is a relevant factor. Target participants (14 British and 14 Mediterraneans were cued to think about either positive or negative events they had experienced. Subsequently, perceiver participants (16 British and 16 Mediterraneans watched videos of the targets thinking about these things. Perceivers (both groups were significantly accurate in judging when targets had been cued to think of something positive versus something negative, indicating notable inferential ability. Additionally, Mediterranean perceivers were better than British perceivers in making such inferences, irrespective of nationality of the targets, something that was statistically accounted for by corresponding group differences in levels of independently measured collectivism. The results point to the need for further research to investigate the possibility that being reared in a collectivist culture fosters ability in interpreting others' behaviour.

  8. Practical guidance on representing the heteroscedasticity of residual errors of hydrological predictions

    Science.gov (United States)

    McInerney, David; Thyer, Mark; Kavetski, Dmitri; Kuczera, George

    2016-04-01

    Appropriate representation of residual errors in hydrological modelling is essential for accurate and reliable probabilistic streamflow predictions. In particular, residual errors of hydrological predictions are often heteroscedastic, with large errors associated with high runoff events. Although multiple approaches exist for representing this heteroscedasticity, few if any studies have undertaken a comprehensive evaluation and comparison of these approaches. This study fills this research gap by evaluating a range of approaches for representing heteroscedasticity in residual errors. These approaches include the 'direct' weighted least squares approach and 'transformational' approaches, such as logarithmic, Box-Cox (with and without fitting the transformation parameter), logsinh and the inverse transformation. The study reports (1) theoretical comparison of heteroscedasticity approaches, (2) empirical evaluation of heteroscedasticity approaches using a range of multiple catchments / hydrological models / performance metrics and (3) interpretation of empirical results using theory to provide practical guidance on the selection of heteroscedasticity approaches. Importantly, for hydrological practitioners, the results will simplify the choice of approaches to represent heteroscedasticity. This will enhance their ability to provide hydrological probabilistic predictions with the best reliability and precision for different catchment types (e.g. high/low degree of ephemerality).

  9. 40 CFR 761.312 - Compositing of samples.

    Science.gov (United States)

    2010-07-01

    ... to composite surface wipe test samples and to use the composite measurement to represent the PCB concentration of the entire surface. Composite samples consist of more than one sample gauze extracted and... arithmetic mean of the composited samples. (a) Compositing samples from surfaces to be used or reused. For...

  10. Determination of protein carbonyls in plasma, cell extracts, tissue homogenates, isolated proteins: Focus on sample preparation and derivatization conditions.

    Science.gov (United States)

    Weber, Daniela; Davies, Michael J; Grune, Tilman

    2015-08-01

    Protein oxidation is involved in regulatory physiological events as well as in damage to tissues and is thought to play a key role in the pathophysiology of diseases and in the aging process. Protein-bound carbonyls represent a marker of global protein oxidation, as they are generated by multiple different reactive oxygen species in blood, tissues and cells. Sample preparation and stabilization are key steps in the accurate quantification of oxidation-related products and examination of physiological/pathological processes. This review therefore focuses on the sample preparation processes used in the most relevant methods to detect protein carbonyls after derivatization with 2,4-dinitrophenylhydrazine with an emphasis on measurement in plasma, cells, organ homogenates, isolated proteins and organelles. Sample preparation, derivatization conditions and protein handling are presented for the spectrophotometric and HPLC method as well as for immunoblotting and ELISA. An extensive overview covering these methods in previously published articles is given for researchers who plan to measure protein carbonyls in different samples. © 2015 Published by Elsevier Ltd.

  11. Calibration samples for accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Hershberger, R.L.; Flynn, D.S.; Gabbard, F.

    1981-01-01

    Radioactive samples with precisely known numbers of atoms are useful as calibration sources for lifetime measurements using accelerator mass spectrometry. Such samples can be obtained in two ways: either by measuring the production rate as the sample is created or by measuring the decay rate after the sample has been obtained. The latter method requires that a large sample be produced and that the decay constant be accurately known. The former method is a useful and independent alternative, especially when the decay constant is not well known. The facilities at the University of Kentucky for precision measurements of total neutron production cross sections offer a source of such calibration samples. The possibilities, while quite extensive, would be limited to the proton rich side of the line of stability because of the use of (p,n) and (α,n) reactions for sample production

  12. Accurate first-principles structures and energies of diversely bonded systems from an efficient density functional.

    Science.gov (United States)

    Sun, Jianwei; Remsing, Richard C; Zhang, Yubo; Sun, Zhaoru; Ruzsinszky, Adrienn; Peng, Haowei; Yang, Zenghui; Paul, Arpita; Waghmare, Umesh; Wu, Xifan; Klein, Michael L; Perdew, John P

    2016-09-01

    One atom or molecule binds to another through various types of bond, the strengths of which range from several meV to several eV. Although some computational methods can provide accurate descriptions of all bond types, those methods are not efficient enough for many studies (for example, large systems, ab initio molecular dynamics and high-throughput searches for functional materials). Here, we show that the recently developed non-empirical strongly constrained and appropriately normed (SCAN) meta-generalized gradient approximation (meta-GGA) within the density functional theory framework predicts accurate geometries and energies of diversely bonded molecules and materials (including covalent, metallic, ionic, hydrogen and van der Waals bonds). This represents a significant improvement at comparable efficiency over its predecessors, the GGAs that currently dominate materials computation. Often, SCAN matches or improves on the accuracy of a computationally expensive hybrid functional, at almost-GGA cost. SCAN is therefore expected to have a broad impact on chemistry and materials science.

  13. 14 CFR 1274.906 - Designation of New Technology Representative and Patent Representative.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Designation of New Technology... Conditions § 1274.906 Designation of New Technology Representative and Patent Representative. Designation of New Technology Representative and Patent Representative July 2002 (a) For purposes of administration...

  14. Educational Attainment by Life Course Sexual Attraction: Prevalence and Correlates in a Nationally Representative Sample of Young Adults

    Science.gov (United States)

    Walsemann, Katrina M.; Lindley, Lisa L.; Gentile, Danielle; Welihindha, Shehan V.

    2014-01-01

    Researchers know relatively little about the educational attainment of sexual minorities, despite the fact that educational attainment is consistently associated with a range of social, economic, and health outcomes. We examined whether sexual attraction in adolescence and early adulthood was associated with educational attainment in early adulthood among a nationally representative sample of US young adults. We analyzed Waves I and IV restricted data from the National Longitudinal Study of Adolescent Health (n=14,111). Sexual orientation was assessed using self-reports of romantic attraction in Waves I (adolescence) and IV (adulthood). Multinomial regression models were estimated and all analyses were stratified by gender. Women attracted to the same-sex in adulthood only had lower educational attainment compared to women attracted only to the opposite-sex in adolescence and adulthood. Men attracted to the same-sex in adolescence only had lower educational attainment compared to men attracted only to the opposite-sex in adolescence and adulthood. Adolescent experiences and academic performance attenuated educational disparities among men and women. Adjustment for adolescent experiences also revealed a suppression effect; women attracted to the same-sex in adolescence and adulthood had lower predicted probabilities of having a high school diploma or less compared to women attracted only to the opposite-sex in adolescence and adulthood. Our findings challenge previous research documenting higher educational attainment among sexual minorities in the US. Additional population-based studies documenting the educational attainment of sexual minority adults are needed. PMID:25382888

  15. Integrated Translatome and Proteome: Approach for Accurate Portraying of Widespread Multifunctional Aspects of Trichoderma

    Science.gov (United States)

    Sharma, Vivek; Salwan, Richa; Sharma, P. N.; Gulati, Arvind

    2017-01-01

    Genome-wide studies of transcripts expression help in systematic monitoring of genes and allow targeting of candidate genes for future research. In contrast to relatively stable genomic data, the expression of genes is dynamic and regulated both at time and space level at different level in. The variation in the rate of translation is specific for each protein. Both the inherent nature of an mRNA molecule to be translated and the external environmental stimuli can affect the efficiency of the translation process. In biocontrol agents (BCAs), the molecular response at translational level may represents noise-like response of absolute transcript level and an adaptive response to physiological and pathological situations representing subset of mRNAs population actively translated in a cell. The molecular responses of biocontrol are complex and involve multistage regulation of number of genes. The use of high-throughput techniques has led to rapid increase in volume of transcriptomics data of Trichoderma. In general, almost half of the variations of transcriptome and protein level are due to translational control. Thus, studies are required to integrate raw information from different “omics” approaches for accurate depiction of translational response of BCAs in interaction with plants and plant pathogens. The studies on translational status of only active mRNAs bridging with proteome data will help in accurate characterization of only a subset of mRNAs actively engaged in translation. This review highlights the associated bottlenecks and use of state-of-the-art procedures in addressing the gap to accelerate future accomplishment of biocontrol mechanisms. PMID:28900417

  16. Independent assessment of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) sample preparation quality : Effect of sample preparation on MALDI-MS of synthetic polymers

    NARCIS (Netherlands)

    Kooijman, Pieter C.; Kok, Sander; Honing, Maarten

    2017-01-01

    Rationale: Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) provides detailed and in-depth information about the molecular characteristics of synthetic polymers. To obtain the most accurate results the sample preparation parameters should be chosen to suit the sample and the

  17. Sample sizes and model comparison metrics for species distribution models

    Science.gov (United States)

    B.B. Hanberry; H.S. He; D.C. Dey

    2012-01-01

    Species distribution models use small samples to produce continuous distribution maps. The question of how small a sample can be to produce an accurate model generally has been answered based on comparisons to maximum sample sizes of 200 observations or fewer. In addition, model comparisons often are made with the kappa statistic, which has become controversial....

  18. Gender differences in the associations of gambling activities and suicidal behaviors with problem gambling in a nationally representative French sample.

    Science.gov (United States)

    Husky, Mathilde M; Michel, Grégory; Richard, Jean-Baptiste; Guignard, Romain; Beck, François

    2015-06-01

    The objectives of the present study are to describe gender differences in factors associated with moderate risk and problem gambling. Data were extracted from the 2010 Health Barometer, a large survey on a representative sample of the general population aged 15-85 years living in France (n=27,653), carried out by the National Institute for Health Promotion and Health Education. Data were collected between October 2009 and July 2010. A computer-assisted telephone interview system was used. The findings indicate that men are three times more likely to experience problems with gambling. Men and women have different patterns of gambling activities. Men were more involved with Rapido, internet gambling, sports and racetrack betting, poker, and casino tables, whereas women gambled more often on scratch games. Both men and women engaging in immediate reward games were significantly more likely to experience difficulties with gambling. This association, however, was stronger in women. Furthermore, suicidal ideation and behaviors were more likely to be associated with gambling problems in women as compared to men. The study underscores the importance of considering gender-related differences in the study of gambling behaviors. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Premenstrual dysphoric disorder as a correlate of suicidal ideation, plans, and attempts among a nationally representative sample.

    Science.gov (United States)

    Pilver, Corey E; Libby, Daniel J; Hoff, Rani A

    2013-03-01

    Suicide is a major public health concern and a leading cause of death in the United States. Psychopathology is an established risk factor for non-fatal suicidal behavior; however, it is unclear whether premenstrual dysphoric disorder (PMDD), a psychiatric disorder specific to women, is correlated with these outcomes. The objective of this study was to determine if PMDD status was associated with suicidal ideation, plans, and attempts, independent of socio-demographic factors and psychiatric comorbidity. We conducted a secondary data analysis of 3,965 American women aged 18-40 who participated in the Collaborative Psychiatric Epidemiology Survey. Descriptive statistics and forward stepwise logistic regression modeling were performed using SUDAAN software. The prevalence of non-fatal suicidal behaviors increased in a graded fashion according to PMDD status. Although the control for demographic characteristics and psychiatric comorbidity greatly attenuated the unadjusted association between PMDD and suicidal behaviors, women with PMDD remained significantly more likely than women with no premenstrual symptoms to report suicidal ideation (OR 2.22; 95% CI 1.40-3.53), plans (OR 2.27; 95% CI 1.20-4.28), and attempts (OR 2.10; 95% CI 1.08-4.08). Only the likelihood of suicidal ideation was significantly elevated among women with moderate/severe premenstrual syndrome (PMS; OR 1.49; 95% CI 1.17-1.88), compared to women with no premenstrual symptoms. PMDD was strongly and independently associated with non-fatal suicidal behaviors among a nationally representative sample. These findings suggest that clinicians treating women with PMDD should assess and be vigilant for signs of non-fatal suicidal behavior, and that clinicians should evaluate and treat the premenstrual symptoms of women who express these behaviors.

  20. Can Nonurgent Emergency Department Care Costs be Reduced? Empirical Evidence from a U.S. Nationally Representative Sample.

    Science.gov (United States)

    Xin, Haichang; Kilgore, Meredith L; Sen, Bisakha Pia; Blackburn, Justin

    2015-09-01

    A well-functioning primary care system has the capacity to provide effective care for patients to avoid nonurgent emergency department (ED) use and related costs. This study examined how patients' perceived deficiency in ambulatory care is associated with nonurgent ED care costs nationwide. This retrospective cohort study used data from the 2010-2011 Medical Expenditure Panel Survey. This study chose usual source of care, convenience of needed medical care, and patient evaluation of care quality as the main independent variables. The marginal effect following a multivariate logit model was employed to analyze the urgent vs. nonurgent ED care costs in 2011, after controlling for covariates in 2010. The endogeneity was accounted for by the time lag effect and controlling for education levels. Sample weights and variance were adjusted with the survey procedures to make results nationally representative. Patient-perceived poor and intermediate levels of primary care quality had higher odds of nonurgent ED care costs (odds ratio [OR] = 2.22, p = 0.035, and OR = 2.05, p = 0.011, respectively) compared to high-quality care, with a marginal effect (at means) of 13.0% and 11.5% higher predicted probability of nonurgent ED care costs. Costs related to these ambulatory care quality deficiencies amounted to $229 million for private plans (95% confidence interval [CI] $100 million-$358 million), $58.5 million for public plans (95% CI $33.9 million-$83.1 million), and an overall of $379 million (95% CI $229 million-$529 million) nationally. These findings highlight the improvement in ambulatory care quality as the potential target area to effectively reduce nonurgent ED care costs. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Using semantics for representing experimental protocols.

    Science.gov (United States)

    Giraldo, Olga; García, Alexander; López, Federico; Corcho, Oscar

    2017-11-13

    An experimental protocol is a sequence of tasks and operations executed to perform experimental research in biological and biomedical areas, e.g. biology, genetics, immunology, neurosciences, virology. Protocols often include references to equipment, reagents, descriptions of critical steps, troubleshooting and tips, as well as any other information that researchers deem important for facilitating the reusability of the protocol. Although experimental protocols are central to reproducibility, the descriptions are often cursory. There is the need for a unified framework with respect to the syntactic structure and the semantics for representing experimental protocols. In this paper we present "SMART Protocols ontology", an ontology for representing experimental protocols. Our ontology represents the protocol as a workflow with domain specific knowledge embedded within a document. We also present the S ample I nstrument R eagent O bjective (SIRO) model, which represents the minimal common information shared across experimental protocols. SIRO was conceived in the same realm as the Patient Intervention Comparison Outcome (PICO) model that supports search, retrieval and classification purposes in evidence based medicine. We evaluate our approach against a set of competency questions modeled as SPARQL queries and processed against a set of published and unpublished protocols modeled with the SP Ontology and the SIRO model. Our approach makes it possible to answer queries such as Which protocols use tumor tissue as a sample. Improving reporting structures for experimental protocols requires collective efforts from authors, peer reviewers, editors and funding bodies. The SP Ontology is a contribution towards this goal. We build upon previous experiences and bringing together the view of researchers managing protocols in their laboratory work. Website: https://smartprotocols.github.io/ .

  2. Genometa--a fast and accurate classifier for short metagenomic shotgun reads.

    Science.gov (United States)

    Davenport, Colin F; Neugebauer, Jens; Beckmann, Nils; Friedrich, Benedikt; Kameri, Burim; Kokott, Svea; Paetow, Malte; Siekmann, Björn; Wieding-Drewes, Matthias; Wienhöfer, Markus; Wolf, Stefan; Tümmler, Burkhard; Ahlers, Volker; Sprengel, Frauke

    2012-01-01

    Metagenomic studies use high-throughput sequence data to investigate microbial communities in situ. However, considerable challenges remain in the analysis of these data, particularly with regard to speed and reliable analysis of microbial species as opposed to higher level taxa such as phyla. We here present Genometa, a computationally undemanding graphical user interface program that enables identification of bacterial species and gene content from datasets generated by inexpensive high-throughput short read sequencing technologies. Our approach was first verified on two simulated metagenomic short read datasets, detecting 100% and 94% of the bacterial species included with few false positives or false negatives. Subsequent comparative benchmarking analysis against three popular metagenomic algorithms on an Illumina human gut dataset revealed Genometa to attribute the most reads to bacteria at species level (i.e. including all strains of that species) and demonstrate similar or better accuracy than the other programs. Lastly, speed was demonstrated to be many times that of BLAST due to the use of modern short read aligners. Our method is highly accurate if bacteria in the sample are represented by genomes in the reference sequence but cannot find species absent from the reference. This method is one of the most user-friendly and resource efficient approaches and is thus feasible for rapidly analysing millions of short reads on a personal computer. The Genometa program, a step by step tutorial and Java source code are freely available from http://genomics1.mh-hannover.de/genometa/ and on http://code.google.com/p/genometa/. This program has been tested on Ubuntu Linux and Windows XP/7.

  3. Genometa--a fast and accurate classifier for short metagenomic shotgun reads.

    Directory of Open Access Journals (Sweden)

    Colin F Davenport

    Full Text Available Metagenomic studies use high-throughput sequence data to investigate microbial communities in situ. However, considerable challenges remain in the analysis of these data, particularly with regard to speed and reliable analysis of microbial species as opposed to higher level taxa such as phyla. We here present Genometa, a computationally undemanding graphical user interface program that enables identification of bacterial species and gene content from datasets generated by inexpensive high-throughput short read sequencing technologies. Our approach was first verified on two simulated metagenomic short read datasets, detecting 100% and 94% of the bacterial species included with few false positives or false negatives. Subsequent comparative benchmarking analysis against three popular metagenomic algorithms on an Illumina human gut dataset revealed Genometa to attribute the most reads to bacteria at species level (i.e. including all strains of that species and demonstrate similar or better accuracy than the other programs. Lastly, speed was demonstrated to be many times that of BLAST due to the use of modern short read aligners. Our method is highly accurate if bacteria in the sample are represented by genomes in the reference sequence but cannot find species absent from the reference. This method is one of the most user-friendly and resource efficient approaches and is thus feasible for rapidly analysing millions of short reads on a personal computer.The Genometa program, a step by step tutorial and Java source code are freely available from http://genomics1.mh-hannover.de/genometa/ and on http://code.google.com/p/genometa/. This program has been tested on Ubuntu Linux and Windows XP/7.

  4. Improved Methods of Carnivore Faecal Sample Preservation, DNA Extraction and Quantification for Accurate Genotyping of Wild Tigers

    Science.gov (United States)

    Harika, Katakam; Mahla, Ranjeet Singh; Shivaji, Sisinthy

    2012-01-01

    Background Non-invasively collected samples allow a variety of genetic studies on endangered and elusive species. However due to low amplification success and high genotyping error rates fewer samples can be identified up to the individual level. Number of PCRs needed to obtain reliable genotypes also noticeably increase. Methods We developed a quantitative PCR assay to measure and grade amplifiable nuclear DNA in feline faecal extracts. We determined DNA degradation in experimentally aged faecal samples and tested a suite of pre-PCR protocols to considerably improve DNA retrieval. Results Average DNA concentrations of Grade I, II and III extracts were 982pg/µl, 9.5pg/µl and 0.4pg/µl respectively. Nearly 10% of extracts had no amplifiable DNA. Microsatellite PCR success and allelic dropout rates were 92% and 1.5% in Grade I, 79% and 5% in Grade II, and 54% and 16% in Grade III respectively. Our results on experimentally aged faecal samples showed that ageing has a significant effect on quantity and quality of amplifiable DNA (pDNA degradation occurs within 3 days of exposure to direct sunlight. DNA concentrations of Day 1 samples stored by ethanol and silica methods for a month varied significantly from fresh Day 1 extracts (p0.05). DNA concentrations of fresh tiger and leopard faecal extracts without addition of carrier RNA were 816.5pg/µl (±115.5) and 690.1pg/µl (±207.1), while concentrations with addition of carrier RNA were 49414.5pg/µl (±9370.6) and 20982.7pg/µl (±6835.8) respectively. Conclusions Our results indicate that carnivore faecal samples should be collected as freshly as possible, are better preserved by two-step method and should be extracted with addition of carrier RNA. We recommend quantification of template DNA as this facilitates several downstream protocols. PMID:23071624

  5. Determination of hardiness by psychosocial and behavioural variables in a representative Czech population sample

    Czech Academy of Sciences Publication Activity Database

    Kebza, V.; Šolcová, Iva

    2008-01-01

    Roč. 23, Suppl. 1 (2008), s. 158 ISSN 0887-0446 R&D Projects: GA AV ČR(CZ) IAA 700250701 Institutional research plan: CEZ:AV0Z70250504 Keywords : hardiness * Czech population sample * social support Subject RIV: AN - Psychology

  6. An Accurate Framework for Arbitrary View Pedestrian Detection in Images

    Science.gov (United States)

    Fan, Y.; Wen, G.; Qiu, S.

    2018-01-01

    We consider the problem of detect pedestrian under from images collected under various viewpoints. This paper utilizes a novel framework called locality-constrained affine subspace coding (LASC). Firstly, the positive training samples are clustered into similar entities which represent similar viewpoint. Then Principal Component Analysis (PCA) is used to obtain the shared feature of each viewpoint. Finally, the samples that can be reconstructed by linear approximation using their top- k nearest shared feature with a small error are regarded as a correct detection. No negative samples are required for our method. Histograms of orientated gradient (HOG) features are used as the feature descriptors, and the sliding window scheme is adopted to detect humans in images. The proposed method exploits the sparse property of intrinsic information and the correlations among the multiple-views samples. Experimental results on the INRIA and SDL human datasets show that the proposed method achieves a higher performance than the state-of-the-art methods in form of effect and efficiency.

  7. Development of a mathematical phantom representing a 10-year-old child for use in internal dosimetry calculations

    International Nuclear Information System (INIS)

    Deus, S.F.; Poston, J.W.

    1976-01-01

    With the increased growth of nuclear energy generating facilities, estimates of absorbed radiation dose to human population groups (e.g., children) are required. In addition, children are being exposed to many nuclear medicine procedures and accurate dose estimates are needed. The main purpose of this research is to design a mathematical phantom representing as closely as possible a 10-year old child

  8. Enhancing sampling design in mist-net bat surveys by accounting for sample size optimization

    OpenAIRE

    Trevelin, Leonardo Carreira; Novaes, Roberto Leonan Morim; Colas-Rosas, Paul François; Benathar, Thayse Cristhina Melo; Peres, Carlos A.

    2017-01-01

    The advantages of mist-netting, the main technique used in Neotropical bat community studies to date, include logistical implementation, standardization and sampling representativeness. Nonetheless, study designs still have to deal with issues of detectability related to how different species behave and use the environment. Yet there is considerable sampling heterogeneity across available studies in the literature. Here, we approach the problem of sample size optimization. We evaluated the co...

  9. A class representative model for Pure Parsimony Haplotyping under uncertain data.

    Directory of Open Access Journals (Sweden)

    Daniele Catanzaro

    Full Text Available The Pure Parsimony Haplotyping (PPH problem is a NP-hard combinatorial optimization problem that consists of finding the minimum number of haplotypes necessary to explain a given set of genotypes. PPH has attracted more and more attention in recent years due to its importance in analysis of many fine-scale genetic data. Its application fields range from mapping complex disease genes to inferring population histories, passing through designing drugs, functional genomics and pharmacogenetics. In this article we investigate, for the first time, a recent version of PPH called the Pure Parsimony Haplotype problem under Uncertain Data (PPH-UD. This version mainly arises when the input genotypes are not accurate, i.e., when some single nucleotide polymorphisms are missing or affected by errors. We propose an exact approach to solution of PPH-UD based on an extended version of Catanzaro et al.[1] class representative model for PPH, currently the state-of-the-art integer programming model for PPH. The model is efficient, accurate, compact, polynomial-sized, easy to implement, solvable with any solver for mixed integer programming, and usable in all those cases for which the parsimony criterion is well suited for haplotype estimation.

  10. MCNPX calculations of dose rate distribution inside samples treated in the research gamma irradiating facility at CTEx

    Energy Technology Data Exchange (ETDEWEB)

    Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G., E-mail: tiagorusin@ime.eb.b, E-mail: rebello@ime.eb.b, E-mail: vellozo@cbpf.b, E-mail: renatoguedes@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Nuclear; Vital, Helio C., E-mail: vital@ctex.eb.b [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil); Silva, Ademir X., E-mail: ademir@con.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Engenharia Nuclear

    2011-07-01

    A cavity-type cesium-137 research irradiating facility at CTEx has been modeled by using the Monte Carlo code MCNPX. The irradiator has been daily used in experiments to optimize the use of ionizing radiation for conservation of many kinds of food and to improve materials properties. In order to correlate the effects of the treatment, average doses have been calculated for each irradiated sample, accounting for the measured dose rate distribution in the irradiating chambers. However that approach is only approximate, being subject to significant systematic errors due to the heterogeneous internal structure of most samples that can lead to large anisotropy in attenuation and Compton scattering properties across the media. Thus this work is aimed at further investigating such uncertainties by calculating the dose rate distribution inside the items treated such that a more accurate and representative estimate of the total absorbed dose can be determined for later use in the effects-versus-dose correlation curves. Samples of different simplified geometries and densities (spheres, cylinders, and parallelepipeds), have been modeled to evaluate internal dose rate distributions within the volume of the samples and the overall effect on the average dose. (author)

  11. MCNPX calculations of dose rate distribution inside samples treated in the research gamma irradiating facility at CTEx

    International Nuclear Information System (INIS)

    Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G.; Silva, Ademir X.

    2011-01-01

    A cavity-type cesium-137 research irradiating facility at CTEx has been modeled by using the Monte Carlo code MCNPX. The irradiator has been daily used in experiments to optimize the use of ionizing radiation for conservation of many kinds of food and to improve materials properties. In order to correlate the effects of the treatment, average doses have been calculated for each irradiated sample, accounting for the measured dose rate distribution in the irradiating chambers. However that approach is only approximate, being subject to significant systematic errors due to the heterogeneous internal structure of most samples that can lead to large anisotropy in attenuation and Compton scattering properties across the media. Thus this work is aimed at further investigating such uncertainties by calculating the dose rate distribution inside the items treated such that a more accurate and representative estimate of the total absorbed dose can be determined for later use in the effects-versus-dose correlation curves. Samples of different simplified geometries and densities (spheres, cylinders, and parallelepipeds), have been modeled to evaluate internal dose rate distributions within the volume of the samples and the overall effect on the average dose. (author)

  12. Evaluation of respondent-driven sampling.

    Science.gov (United States)

    McCreesh, Nicky; Frost, Simon D W; Seeley, Janet; Katongole, Joseph; Tarsh, Matilda N; Ndunguse, Richard; Jichi, Fatima; Lunel, Natasha L; Maher, Dermot; Johnston, Lisa G; Sonnenberg, Pam; Copas, Andrew J; Hayes, Richard J; White, Richard G

    2012-01-01

    Respondent-driven sampling is a novel variant of link-tracing sampling for estimating the characteristics of hard-to-reach groups, such as HIV prevalence in sex workers. Despite its use by leading health organizations, the performance of this method in realistic situations is still largely unknown. We evaluated respondent-driven sampling by comparing estimates from a respondent-driven sampling survey with total population data. Total population data on age, tribe, religion, socioeconomic status, sexual activity, and HIV status were available on a population of 2402 male household heads from an open cohort in rural Uganda. A respondent-driven sampling (RDS) survey was carried out in this population, using current methods of sampling (RDS sample) and statistical inference (RDS estimates). Analyses were carried out for the full RDS sample and then repeated for the first 250 recruits (small sample). We recruited 927 household heads. Full and small RDS samples were largely representative of the total population, but both samples underrepresented men who were younger, of higher socioeconomic status, and with unknown sexual activity and HIV status. Respondent-driven sampling statistical inference methods failed to reduce these biases. Only 31%-37% (depending on method and sample size) of RDS estimates were closer to the true population proportions than the RDS sample proportions. Only 50%-74% of respondent-driven sampling bootstrap 95% confidence intervals included the population proportion. Respondent-driven sampling produced a generally representative sample of this well-connected nonhidden population. However, current respondent-driven sampling inference methods failed to reduce bias when it occurred. Whether the data required to remove bias and measure precision can be collected in a respondent-driven sampling survey is unresolved. Respondent-driven sampling should be regarded as a (potentially superior) form of convenience sampling method, and caution is required

  13. Detection of Locally Over-Represented GO Terms in Protein-Protein Interaction Networks

    Science.gov (United States)

    LAVALLÉE-ADAM, MATHIEU; COULOMBE, BENOIT; BLANCHETTE, MATHIEU

    2015-01-01

    High-throughput methods for identifying protein-protein interactions produce increasingly complex and intricate interaction networks. These networks are extremely rich in information, but extracting biologically meaningful hypotheses from them and representing them in a human-readable manner is challenging. We propose a method to identify Gene Ontology terms that are locally over-represented in a subnetwork of a given biological network. Specifically, we propose several methods to evaluate the degree of clustering of proteins associated to a particular GO term in both weighted and unweighted PPI networks, and describe efficient methods to estimate the statistical significance of the observed clustering. We show, using Monte Carlo simulations, that our best approximation methods accurately estimate the true p-value, for random scale-free graphs as well as for actual yeast and human networks. When applied to these two biological networks, our approach recovers many known complexes and pathways, but also suggests potential functions for many subnetworks. Online Supplementary Material is available at www.liebertonline.com. PMID:20377456

  14. Operationalisation and validation of the Stopping Elderly Accidents, Deaths, and Injuries (STEADI) fall risk algorithm in a nationally representative sample.

    Science.gov (United States)

    Lohman, Matthew C; Crow, Rebecca S; DiMilia, Peter R; Nicklett, Emily J; Bruce, Martha L; Batsis, John A

    2017-12-01

    Preventing falls and fall-related injuries among older adults is a public health priority. The Stopping Elderly Accidents, Deaths, and Injuries (STEADI) tool was developed to promote fall risk screening and encourage coordination between clinical and community-based fall prevention resources; however, little is known about the tool's predictive validity or adaptability to survey data. Data from five annual rounds (2011-2015) of the National Health and Aging Trends Study (NHATS), a representative cohort of adults age 65 years and older in the USA. Analytic sample respondents (n=7392) were categorised at baseline as having low, moderate or high fall risk according to the STEADI algorithm adapted for use with NHATS data. Logistic mixed-effects regression was used to estimate the association between baseline fall risk and subsequent falls and mortality. Analyses incorporated complex sampling and weighting elements to permit inferences at a national level. Participants classified as having moderate and high fall risk had 2.62 (95% CI 2.29 to 2.99) and 4.76 (95% CI 3.51 to 6.47) times greater odds of falling during follow-up compared with those with low risk, respectively, controlling for sociodemographic and health-related risk factors for falls. High fall risk was also associated with greater likelihood of falling multiple times annually but not with greater risk of mortality. The adapted STEADI clinical fall risk screening tool is a valid measure for predicting future fall risk using survey cohort data. Further efforts to standardise screening for fall risk and to coordinate between clinical and community-based fall prevention initiatives are warranted. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  15. Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6) in a Nationally Representative Sample of Adolescents.

    Science.gov (United States)

    Demetrovics, Zsolt; Király, Orsolya; Koronczai, Beatrix; Griffiths, Mark D; Nagygyörgy, Katalin; Elekes, Zsuzsanna; Tamás, Domokos; Kun, Bernadette; Kökönyei, Gyöngyi; Urbán, Róbert

    2016-01-01

    Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item) version of the Problematic Internet Use Questionnaire (PIUQ) on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87) and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities). Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30) was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item) PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates.

  16. Adverse childhood experiences predict earlier age of drinking onset: results from a representative US sample of current or former drinkers.

    Science.gov (United States)

    Rothman, Emily F; Edwards, Erika M; Heeren, Timothy; Hingson, Ralph W

    2008-08-01

    Our goal was to determine whether adverse childhood experiences predicted the age at which drinking was initiated and drinking motives in a representative sample of current or former drinkers in the United States. In 2006, a probability sample of 3592 US current or former drinkers aged 18 to 39 were surveyed. Multinomial logistic regression examined whether each of 10 adverse childhood experiences was associated with earlier ages of drinking onset, controlling for demographics, parental alcohol use, parental attitudes toward drinking, and peers' drinking in adolescence. We also examined whether there was a graded relationship between the number of adverse childhood experiences and age of drinking onset and whether adverse childhood experiences were related to self-reported motives for drinking during the first year that respondents drank. Sixty-six percent of respondents reported >or=1 adverse childhood experiences, and 19% reported experiencing >or=4. The most commonly reported adverse childhood experiences were parental separation/divorce (41.3%), living with a household member who was a problem drinker (28.7%), mental illness of a household member (24.8%), and sexual abuse (19.1%). Of the 10 specific adverse childhood experiences assessed, 5 were significantly associated with initiating drinking at or=21 years of age) after adjustment for confounders, including physical abuse, sexual abuse, having a mentally ill household member, substance abuse in the home, and parental discord or divorce. Compared with those without adverse childhood experiences, respondents with adverse childhood experiences were substantially more likely to report that they drank to cope during the first year that they used alcohol. Results suggest that children with particular adverse childhood experiences may initiate drinking earlier than their peers and that they may be more likely to drink to cope with problems (rather than for pleasure or to be social).

  17. Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6) in a Nationally Representative Sample of Adolescents

    Science.gov (United States)

    Demetrovics, Zsolt; Király, Orsolya; Koronczai, Beatrix; Griffiths, Mark D.; Nagygyörgy, Katalin; Elekes, Zsuzsanna; Tamás, Domokos; Kun, Bernadette; Kökönyei, Gyöngyi; Urbán, Róbert

    2016-01-01

    Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item) version of the Problematic Internet Use Questionnaire (PIUQ) on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87) and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities). Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30) was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item) PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates. PMID:27504915

  18. Psychometric Properties of the Problematic Internet Use Questionnaire Short-Form (PIUQ-SF-6 in a Nationally Representative Sample of Adolescents.

    Directory of Open Access Journals (Sweden)

    Zsolt Demetrovics

    Full Text Available Despite the large number of measurement tools developed to assess problematic Internet use, numerous studies use measures with only modest investigation into their psychometric properties. The goal of the present study was to validate the short (6-item version of the Problematic Internet Use Questionnaire (PIUQ on a nationally representative adolescent sample (n = 5,005; mean age 16.4 years, SD = 0.87 and to determine a statistically established cut-off value. Data were collected within the framework of the European School Survey Project on Alcohol and Other Drugs project. Results showed an acceptable fit of the original three-factor structure to the data. In addition, a MIMIC model was carried out to justify the need for three distinct factors. The sample was divided into users at-risk of problematic Internet use and those with no-risk using a latent profile analysis. Two latent classes were obtained with 14.4% of adolescents belonging to the at-risk group. Concurrent and convergent validity were tested by comparing the two groups across a number of variables (i.e., time spent online, academic achievement, self-esteem, depressive symptoms, and preferred online activities. Using the at-risk latent profile analysis class as the gold standard, a cut-off value of 15 (out of 30 was suggested based on sensitivity and specificity analyses. In conclusion, the brief version of the (6-item PIUQ also appears to be an appropriate measure to differentiate between Internet users at risk of developing problematic Internet use and those not at risk. Furthermore, due to its brevity, the shortened PIUQ is advantageous to utilize within large-scale surveys assessing many different behaviors and/or constructs by reducing the overall number of survey questions, and as a consequence, likely increasing completion rates.

  19. Does Self-Selection Affect Samples’ Representativeness in Online Surveys? An Investigation in Online Video Game Research

    Science.gov (United States)

    van Singer, Mathias; Chatton, Anne; Achab, Sophia; Zullino, Daniele; Rothen, Stephane; Khan, Riaz; Billieux, Joel; Thorens, Gabriel

    2014-01-01

    Background The number of medical studies performed through online surveys has increased dramatically in recent years. Despite their numerous advantages (eg, sample size, facilitated access to individuals presenting stigmatizing issues), selection bias may exist in online surveys. However, evidence on the representativeness of self-selected samples in online studies is patchy. Objective Our objective was to explore the representativeness of a self-selected sample of online gamers using online players’ virtual characters (avatars). Methods All avatars belonged to individuals playing World of Warcraft (WoW), currently the most widely used online game. Avatars’ characteristics were defined using various games’ scores, reported on the WoW’s official website, and two self-selected samples from previous studies were compared with a randomly selected sample of avatars. Results We used scores linked to 1240 avatars (762 from the self-selected samples and 478 from the random sample). The two self-selected samples of avatars had higher scores on most of the assessed variables (except for guild membership and exploration). Furthermore, some guilds were overrepresented in the self-selected samples. Conclusions Our results suggest that more proficient players or players more involved in the game may be more likely to participate in online surveys. Caution is needed in the interpretation of studies based on online surveys that used a self-selection recruitment procedure. Epidemiological evidence on the reduced representativeness of sample of online surveys is warranted. PMID:25001007

  20. Development of an accurate, sensitive, and robust isotope dilution laser ablation ICP-MS method for simultaneous multi-element analysis (chlorine, sulfur, and heavy metals) in coal samples

    Energy Technology Data Exchange (ETDEWEB)

    Boulyga, Sergei F. [University of Natural Resources and Applied Life Sciences, Department of Chemistry, Division of Analytical Chemistry-VIRIS Laboratory, Vienna (Austria); Johannes Gutenberg-University, Institute of Inorganic Chemistry and Analytical Chemistry, Mainz (Germany); Heilmann, Jens; Heumann, Klaus G. [Johannes Gutenberg-University, Institute of Inorganic Chemistry and Analytical Chemistry, Mainz (Germany); Prohaska, Thomas [University of Natural Resources and Applied Life Sciences, Department of Chemistry, Division of Analytical Chemistry-VIRIS Laboratory, Vienna (Austria)

    2007-10-15

    A method for the direct multi-element determination of Cl, S, Hg, Pb, Cd, U, Br, Cr, Cu, Fe, and Zn in powdered coal samples has been developed by applying inductively coupled plasma isotope dilution mass spectrometry (ICP-IDMS) with laser-assisted introduction into the plasma. A sector-field ICP-MS with a mass resolution of 4,000 and a high-ablation rate laser ablation system provided significantly better sensitivity, detection limits, and accuracy compared to a conventional laser ablation system coupled with a quadrupole ICP-MS. The sensitivity ranges from about 590 cps for {sup 35}Cl{sup +} to more than 6 x 10{sup 5} cps for {sup 238}U{sup +} for 1 {mu}g of trace element per gram of coal sample. Detection limits vary from 450 ng g{sup -1} for chlorine and 18 ng g{sup -1} for sulfur to 9.5 pg g{sup -1} for mercury and 0.3 pg g{sup -1} for uranium. Analyses of minor and trace elements in four certified reference materials (BCR-180 Gas Coal, BCR-331 Steam Coal, SRM 1632c Trace Elements in Coal, SRM 1635 Trace Elements in Coal) yielded good agreement of usually not more than 5% deviation from the certified values and precisions of less than 10% relative standard deviation for most elements. Higher relative standard deviations were found for particular elements such as Hg and Cd caused by inhomogeneities due to associations of these elements within micro-inclusions in coal which was demonstrated for Hg in SRM 1635, SRM 1632c, and another standard reference material (SRM 2682b, Sulfur and Mercury in Coal). The developed LA-ICP-IDMS method with its simple sample pretreatment opens the possibility for accurate, fast, and highly sensitive determinations of environmentally critical contaminants in coal as well as of trace impurities in similar sample materials like graphite powder and activated charcoal on a routine basis. (orig.)