Geologic data for borehole ERDA-9, Eddy County, New Mexico

International Nuclear Information System (INIS)

Jones, C.L.

1981-01-01

Borehole ERDA-9 is an exploratory well drilled in eastern Eddy County, New Mexico to evaluate and test salt beds for disposal of nuclear wastes. The drilling was done between April 28 and June 4, 1976. Lithologic and stratigraphic details of the geologic section in ERDA-9 are described herein. The selection includes: (1) the Mescalero caliche and the Gatuna Formation of Pleistocene age, (2) the Santa Rosa Sandstone of Triassic age, and (3) the Dewey Lake Red Beds, the Rustler Formation, the Salado Formation, and part of the Castile Formation; all of Permian age

Effects of lithology on geothermal gradient on the southeast Nigeria ...

African Journals Online (AJOL)

A study of the effects of lithologic formations on geothermal gradients is carried out in the south-east Niger Delta, Nigeria, using continuous temperature and lithologic log data from closely-spaced petroleum wells. The gradient profiles obtained for the deep wells, logged to depths between 6500 ft (1981m) and 8500ft ...

Evaluation the complex lithologies in the oil well using spectral density instrument

International Nuclear Information System (INIS)

Zivanov, M.; Martinovic, S.; Jakovljevic, B.

1991-01-01

Spectral density instrument for logging in the oil wells, beside density, measure photo electrical cross section. The principles of logging are discussed of modern spectral density. Results of logging are used dor determining the complex lithology in the oil well. With this instrument are obtained the more accurate and reliable logging results and better lithology rate and reliable logging results and better lithology determination in the formations. (author)

Physical and lithological properties Oligocene-Miocene formations of the Okhotsk-Kamchatka Basin (to 85-th Anniversary of Professor Yuri Konstantinovich Burlin

Directory of Open Access Journals (Sweden)

E.E. Karnyushina

2017-05-01

Full Text Available The purpose of the investigation was the prediction of physical and lithological properties of volcanogenic-sedimentary formations at different depths. For this purpose Oligocene-Miocene sediments from a number of wells within the Icha and Kolpakovsky depressions of Okhotsk-Kamchatka oil and gas basin have been studied. Relationship between temperature and fluid conditions of the katagenesis zone and the change in the rocks composition, their porosity, permeability, density, thermal conductivity were identified. Superposed phenomena and characteristics of the reservoir rocks transformations within the water-hydrocarbon contacts in the gas and gas condensate pools have been considered. The relationship between volcanogenic-sedimentary rocks physical and lithological properties and the formation of non-stationary geothermal regime has been shown. The article is devoted to the head of these investigations – Professor Yuri Konstantinovich Burlin (1931-2011. 12 Oktober this year, he would have turned his 85 years.

Regional well-log correlation in the New Mexico portion of the Delaware Basin

International Nuclear Information System (INIS)

Borns, D.J.; Shaffer, S.E.

1985-09-01

Although well logs provide the most complete record of stratigraphy and structure in the northern Delaware Basin, regional interpretations of these logs generate problems of ambiguous lithologic signatures and on-hole anomalies. Interpretation must therefore be based on log-to-log correlation rather than on inferences from single logs. In this report, logs from 276 wells were used to make stratigraphic picks of Ochoan horizons (the Rustler, Salado, and Castile Formations) in the New Mexico portion of the Delaware Basin. Current log correlation suggests that: (1) the Castile is characterized by lateral thickening and thinning; (2) some Castile thinnings are of Permian age; (3) irregular topography in the Guadalupian Bell Canyon Formation may produce apparent structures in the overlying Ochoan units; and (4) extensive dissolution of the Salado is not apparent in the area of the Waste Isolation Pilot Project (WIPP) site. 13 refs., 37 figs

Leveraging Trillions of Pixels for Flood Mitigation Decisions Support in the Rio Salado Basin, Argentina

Science.gov (United States)

Sullivan, J.; Routh, D.; Tellman, B.; Doyle, C.; Tomlin, J. N.

2017-12-01

The Rio Salado River Basin in Argentina is an economically important region that generates 25-30 percent of Argentina's grain and meat production. Between 2000-2011, floods in the basin caused nearly US$4.5 billion in losses and affected 5.5 million people. With the goal of developing cost-efficient flood monitoring and prediction capabilities in the Rio Salado Basin to support decision making, Cloud to Street is developing satellite based analytics to cover information gaps and improve monitoring capacity. This talk will showcase the Flood Risk Dashboard developed by Cloud to Street to support monitoring and decision-making at the level of provincial and national water management agencies in the Rio Salado Watershed. The Dashboard is based on analyzing thousands of MODIS, Landsat, and Sentinel scenes in Google Earth Engine to reconstruct the spatial history of flooding in the basin. The tool, iteratively designed with the end-user, shows a history of floodable areas with specific return times, exposed land uses and population, precipitation hyetographs, and spatial and temporal flood trends in the basin. These trends are used to understand both the impact of past flood mitigation investments (i.e. wetland reconstruction) and identify shifting flood risks. Based on this experience, we will also describe best practices on making remote sensing "flood dashboards" for water agencies.

Joint Inversion of Geochemical Data and Geophysical Logs for Lithology Identification in CCSD Main Hole

Science.gov (United States)

Deng, Chengxiang; Pan, Heping; Luo, Miao

2017-12-01

The Chinese Continental Scientific Drilling (CCSD) main hole is located in the Sulu ultrahigh-pressure metamorphic (UHPM) belt, providing significant opportunities for studying the metamorphic strata structure, kinetics process and tectonic evolution. Lithology identification is the primary and crucial stage for above geoscientific researches. To release the burden of log analyst and improve the efficiency of lithology interpretation, many algorithms have been developed to automate the process of lithology prediction. While traditional statistical techniques, such as discriminant analysis and K-nearest neighbors classifier, are incompetent in extracting nonlinear features of metamorphic rocks from complex geophysical log data; artificial intelligence algorithms are capable of solving nonlinear problems, but most of the algorithms suffer from tuning parameters to be global optimum to establish model rather than local optimum, and also encounter challenges in making the balance between training accuracy and generalization ability. Optimization methods have been applied extensively in the inversion of reservoir parameters of sedimentary formations using well logs. However, it is difficult to obtain accurate solution from the logging response equations of optimization method because of the strong overlapping of nonstationary log signals when applied in metamorphic formations. As oxide contents of each kinds of metamorphic rocks are relatively less overlapping, this study explores an approach, set in a metamorphic formation model and using the Broyden Fletcher Goldfarb Shanno (BFGS) optimization algorithm to identify lithology from oxide data. We first incorporate 11 geophysical logs and lab-collected geochemical data of 47 core samples to construct oxide profile of CCSD main hole by using backwards stepwise multiple regression method, which eliminates irrelevant input logs step by step for higher statistical significance and accuracy. Then we establish oxide response

Lithology and Bedrock Geotechnical Properties in Controlling Rock and Ice Mass Movements in Mountain Cryosphere

Science.gov (United States)

Karki, A.; Kargel, J. S.

2017-12-01

Landslides and ice avalanches kill >5000 people annually (D. Petley, 2012, Geology http://dx.doi.org/10.1130/G33217.1); destroy or damage homes and infrastructure; and create secondary hazards, such as flooding due to blocked rivers. Critical roles of surface slope, earthquake shaking, soil characteristics and saturation, river erosional undercutting, rainfall intensity, snow loading, permafrost thaw, freeze-thaw and frost shattering, debuttressing of unstable masses due to glacier thinning, and vegetation burn or removal are well-known factors affecting landslides and avalanches. Lithology-dependent bedrock physicochemical-mechanical properties—especially brittle elastic and shear strength, and chemical weathering properties that affect rock strength, are also recognized controls on landsliding and avalanching, but are not commonly considered in detail in landslide susceptibility assessment. Lithology controls the formation of weakened, weathered bedrock; the formation and accumulation of soils; soil saturation-related properties of grain size distribution, porosity, and permeability; and soil creep related to soil wetting-drying and freeze-thaw. Lithology controls bedrock abrasion and glacial erosion and debris production rates, the formation of rough or smoothed bedrock surface by glaciation, fluvial, and freeze-thaw processes. Lithologic variability (e.g., bedding; fault and joint structure) affects contrasts in chemical weathering rates, porosity, and susceptibility to frost shattering and chemical weathering, hence formation of overhanging outcrops and weakened slip planes. The sudden failure of bedrock or sudden slip of ice on bedrock, and many other processes depend on rock lithology, microstructure (porosity and permeability), and macrostructure (bedding; faults). These properties are sometimes considered in gross terms for landslide susceptibility assessment, but in detailed applications to specific development projects, and in detailed mapping over

Lithology identification of aquifers from geophysical well logs and fuzzy logic analysis: Shui-Lin Area, Taiwan

Science.gov (United States)

Hsieh, Bieng-Zih; Lewis, Charles; Lin, Zsay-Shing

2005-04-01

The purpose of this study is to construct a fuzzy lithology system from well logs to identify formation lithology of a groundwater aquifer system in order to better apply conventional well logging interpretation in hydro-geologic studies because well log responses of aquifers are sometimes different from those of conventional oil and gas reservoirs. The input variables for this system are the gamma-ray log reading, the separation between the spherically focused resistivity and the deep very-enhanced resistivity curves, and the borehole compensated sonic log reading. The output variable is groundwater formation lithology. All linguistic variables are based on five linguistic terms with a trapezoidal membership function. In this study, 50 data sets are clustered into 40 training sets and 10 testing sets for constructing the fuzzy lithology system and validating the ability of system prediction, respectively. The rule-based database containing 12 fuzzy lithology rules is developed from the training data sets, and the rule strength is weighted. A Madani inference system and the bisector of area defuzzification method are used for fuzzy inference and defuzzification. The success of training performance and the prediction ability were both 90%, with the calculated correlation of training and testing equal to 0.925 and 0.928, respectively. Well logs and core data from a clastic aquifer (depths 100-198 m) in the Shui-Lin area of west-central Taiwan are used for testing the system's construction. Comparison of results from core analysis, well logging and the fuzzy lithology system indicates that even though the well logging method can easily define a permeable sand formation, distinguishing between silts and sands and determining grain size variation in sands is more subjective. These shortcomings can be improved by a fuzzy lithology system that is able to yield more objective decisions than some conventional methods of log interpretation.

Water quality for supplementary irrigation in the Quequén Salado River Basin (Argentina

Directory of Open Access Journals (Sweden)

Mario Fabián Marini

2004-01-01

Full Text Available El presente trabajo está centrado en el estudio de la calidad de agua de los cursos que integran la cuenca hidrográfica del río Quequén Salado, Argentina, con el objeto de evaluar su empleo para riego suplementario. Se realizaron determinaciones de salinidad y sodicidad en muestras de agua tomadas en distintos tramos de los ríos y arroyos de la cuenca, así como en las lagunas más importantes, durante la primavera y el verano de los años 1998, 1999 y 2000. El estudio se cumplimentó con la caracterización química de los principales cursos. En base a los valores de conductividad eléctrica y RAS obtenidos, se cartografiaron aquellos sectores de la cuenca con calidades de riego similares. De acuerdo a estos resultados se establecieron los tipos de cultivo que podrían regarse teniendo en cuenta el grado de tolerancia de cada uno. Las aguas de los arroyos provenientes del sector de sierra son de muy buena calidad, y no presentan restricciones para casi ningún tipo de cultivos. Aunque de menor aptitud, los cursos de la cuenca media permiten el riego de los principales cultivos de la zona como el trigo, maíz, girasol, soja y sorgo, entre otros. El agua del río Quequén Salado presenta valores de salinidad sólo tolerados por la cebada y algunas pasturas. No obstante, no se recomienda su uso por su elevada sodisidad. Entre los constituyentes secundarios se determinó el contenido de boro, ya que este elemento puede resultar muy tóxico para determinadas especies. No se encontraron concentraciones superiores al límite permisible de 1 mg/ l, pudiéndose mencionar máximos de 0.84 mg/ l en el río Quequén Salado y 0.76 mg/ l en uno de los afluentes principales.

The Chicxulub crater - impact metamorphism of sulfate and carbonate lithologies

Science.gov (United States)

Deutsch, A.; Langenhorst, F.; Hornemann, U.; Ivanov, B. A.

2003-04-01

It is discussed whether in the aftermath of the Chicxulub event, impact-released CO_2 and SO_x have changed the Earth's climate, acting also as lethal thread for life. Undoubtedly, vaporization of carbonates and sulfates, which are major target lithologies at the Chicxulub impact site, occurred in the footprint of the projectile. What happened to these lithologies outside this very restricted zone was so far unconstrained. Petrologic observations on PEMEX and UNAM as well as on the CSDP cores allow to set up a general classification for shock-related pro-grade effects on sulfate and carbonate sedimentary rocks. Shock effects in lithic breccias are restricted to brecciation and formation of twins in calcite. Suevites mostly lack melted carbonate clasts; annealing effects in anhydrite fragments are absent. The underlying melt breccias contain anhydrite fragments still displaying a sedimentary texture, and limestone clasts, whose texture reflect crystallization from melt. Impact melt breccias from deeper levels frequently contain partially resorbed anhydrite clasts and a melt matrix with the Ca-rich mineral assemblage quartz + plagioclase + clinopyroxene; this mineral assemblage provides evidence for partial dissociation of CaSO_4. Large clasts of anhydrite consist of equant crystals with 120^o triple junctions, a feature indicative for re-crystallization in the solid state. Tagamites (impact melt rocks) are virtually free of clasts from sedimentary lithologies. These rocks have an extremely high formation temperature, which caused total dissociation of CaSO_4 and CaCO_3. Finally, up to 100 μm wide veins of anhydrite + calcite + quartz cut the matrix of all lithologies except the tagamites. They probably represent "degassing vents". The given scheme is in qualitative accordance with data of shock recovery and annealing experiments as well as with modeling results. In addition, it substantiates that annealing plays a fundamental role in the impact metamorphism of

Hydrology and Hydraulic Properties of a Bedded Evaporite Formation

International Nuclear Information System (INIS)

BEAUHEIM, RICHARD L.; ROBERTS, RANDALL M.

2000-01-01

The Permian Salado Formation in the Delaware Basin of New Mexico is an extensively studied evaporite deposit because it is the host formation for the Waste Isolation Pilot Plant, a repository for transuranic wastes. Geologic and hydrologic studies of the Salado conducted since the mid-1970's have led to the development of a conceptual model of the hydrogeology of the formation that involves far-field permeability in anhydrite layers and at least some impure halite layers. Pure halite layers and some impure halite layers may not possess an interconnected pore network adequate to provide permeability. Pore pressures are probably very close to lithostatic pressure. In the near field around an excavation, dilation, creep, and shear have created and/or enhanced permeability and decreased pore pressure. Whether flow occurs in the far field under natural gradients or only after some threshold gradient is reached is unknown. If far-field flow does occur, mean pore velocities are probably on the order of a meter per hundreds of thousands to tens of millions of years. Flow dimensions inferred from most hydraulic-test responses are subradial, which is believed to reflect channeling of flow through fracture networks, or portions of fractures, that occupy a diminishing proportion of the radially available space, or through percolation networks that are not ''saturated'' (fully interconnected). This is probably related to the directional nature of the permeability created or enhanced by excavation effects. Inferred values of permeability cannot be separated from their associated flow dimensions. Therefore, numerical models of flow and transport should include heterogeneity that is structured to provide the same flow dimensions as are observed in hydraulic tests. Modeling of the Salado Formation around the WIPP repository should also include coupling between hydraulic properties and the evolving stress field because hydraulic properties change as the stress field changes

The Quequén Salado river basin: Geology and biochronostratigraphy of the Mio-Pliocene boundary in the southern Pampean plain, Argentina

Science.gov (United States)

Beilinson, E.; Gasparini, G. M.; Tomassini, R. L.; Zárate, M. A.; Deschamps, C. M.; Barendregt, R. W.; Rabassa, J.

2017-07-01

The Quequén Salado river basin has been the focus of several contributions since the first decades of the XX century, namely dealing with the general geological features of the deposits and with the vertebrate remains. In this paper, the Neogene geological history documented by the Quequén Salado river exposures is reconstructed by means of stratigraphic, sedimentological and paleomagnetic studies along with the paleontological analysis of vertebrate remains. The study area is a crucial setting not only to better understand the evolution of the southern Pampas basin during the late Miocene-early Pliocene interval, but also to test the validity of the biochronologic and biostratigraphic schemes, especially the "Irenense". A geological model for the Quequén Salado river valley is proposed: a case of downcutting and headward erosion that contributes with a coherent interpretation to explain the spatial distribution of facies and fossil taxa: the younger in the distal sector of the Quequén Salado middle basin and the older in the lower basin. The sedimentary record is believed to represent the distal reaches of a distributary fluvial system that drained from the Ventania ranges. The stratigraphic section of Paso del Indio Rico results a key stratigraphic site to fully understand the stratigraphic nature of the boundary between the Miocene and the Pliocene (the Huayquerian and Montehermosan stages/ages). In this sense, two stratigraphically superposed range zones have been recognized in the area: Xenodontomys ellipticus Range Zone (latest Miocene-early Pliocene; late Huayquerian), and Eumysops laeviplicatus Range Zone (early Pliocene; Montehermosan). Taking into account the available geological and paleontological evidences, the "Irenense" would not represent a valid biostratigraphic unit, since, according to the geological model here proposed, it would be represented by elements of the Xenodontomys ellipticus Range Zone in the lower QS basin and by elements of the

Reconnaissance Study of the Archaeological and Related Resources of the Lower Puerco and Salado Drainages, Central New Mexico.

Science.gov (United States)

1980-01-01

brings areas of both the Puerco and Salado with the up a myriad of sociocultural implications. 9 :...t.’" - ./ KUI.UA LAVZ , 11 U: s,/ MACA ... Cocina , Sandoval County, New Mexico. School of American Research, Santa Fe. Wilson, John P. 1971 An archaeological survey of the Reserve Oil and Mineral

Multiple biomarkers responses in Prochilodus lineatus allowed assessing changes in the water quality of Salado River basin (Santa Fe, Argentina)

Energy Technology Data Exchange (ETDEWEB)

Cazenave, Jimena, E-mail: jcazenave@inali.unl.edu.a [Laboratorio de Ictiologia, Instituto Nacional de Limnologia (INALI-CONICET-UNL), Paraje El Pozo, Ciudad Universitaria UNL, 3000 Santa Fe (Argentina); Bacchetta, Carla; Parma, Maria J.; Scarabotti, Pablo A. [Laboratorio de Ictiologia, Instituto Nacional de Limnologia (INALI-CONICET-UNL), Paraje El Pozo, Ciudad Universitaria UNL, 3000 Santa Fe (Argentina); Wunderlin, Daniel A. [Dto. Bioquimica Clinica-CIBICI-CONICET, Facultad de Ciencias Quimicas, Universidad Nacional de Cordoba, Haya de la Torre esq Medina Allende, Ciudad Universitaria, 5000 Cordoba (Argentina)

2009-11-15

This field study assessed water quality of Salado River basin by using a set of biomarkers in the fish Prochilodus lineatus. Multiple biomarkers were measured, including morphological indexes (condition factor, liver somatic index), hematological (red and white blood cells) and biochemical (glucose, total protein and cholinesterase activity) parameters. Besides, detoxication and oxidative stress markers (antioxidant enzymes, lipid peroxidation) were measured in liver, gills and kidney. Despite water quality assessment did not show marked differences among sites, biomarkers responses indicate that fish are living under stressful environmental conditions. According to multivariate analysis glucose, glutathione S-transferase activity, lipid peroxidation levels and the count of white blood cells are key biomarkers to contribute to discrimination of sites. So, we suggest use those biomarkers in future monitoring of freshwater aquatic systems. - A battery of biomarkers was successfully applied to assess the health of the fish Prochilodus lineatus from Salado River basin.

Multiple biomarkers responses in Prochilodus lineatus allowed assessing changes in the water quality of Salado River basin (Santa Fe, Argentina)

International Nuclear Information System (INIS)

Cazenave, Jimena; Bacchetta, Carla; Parma, Maria J.; Scarabotti, Pablo A.; Wunderlin, Daniel A.

2009-01-01

This field study assessed water quality of Salado River basin by using a set of biomarkers in the fish Prochilodus lineatus. Multiple biomarkers were measured, including morphological indexes (condition factor, liver somatic index), hematological (red and white blood cells) and biochemical (glucose, total protein and cholinesterase activity) parameters. Besides, detoxication and oxidative stress markers (antioxidant enzymes, lipid peroxidation) were measured in liver, gills and kidney. Despite water quality assessment did not show marked differences among sites, biomarkers responses indicate that fish are living under stressful environmental conditions. According to multivariate analysis glucose, glutathione S-transferase activity, lipid peroxidation levels and the count of white blood cells are key biomarkers to contribute to discrimination of sites. So, we suggest use those biomarkers in future monitoring of freshwater aquatic systems. - A battery of biomarkers was successfully applied to assess the health of the fish Prochilodus lineatus from Salado River basin.

Epidermal characteristics of toxic plants for cattle from the Salado River basin (Buenos Aires, Argentina Caracteres epidérmicos de las plantas tóxicas para el ganado de la Depresión del Salado (Buenos Aires, Argentina

Directory of Open Access Journals (Sweden)

Susana E. Freire

2005-12-01

Full Text Available One hundred and eighty species belonging to 41 families inhabiting the Salado River Basin of the province of Buenos Aires (Argentina were previously reported to be toxic for cattle. The purpose of this study was to provide a tool to distinguish the taxa when the plant material is desintegrated. In this way, an approach to the identification of these taxa through leaf epidermal features (anticlinal epidermal cell wall patterns, cuticular ornamentation, stomata, and hair types is performed. A key to the 180 species as well as illustrations of diagnostic characters are given.Las plantas tóxicas para el ganado están representadas en la Depresión del Salado (provincia de Buenos Aires, Argentina por 180 especies pertenecientes a 41 familias. El objetivo del presente trabajo es determinar estos taxa a partir de material desintegrado, utilizando caracteres epidérmicos foliares (paredes anticlinales de las células epidérmicas, ornamentación de la cutícula, tipos de estomas y pelos. Se brinda una clave para la determinación de las especies e ilustraciones de los caracteres diagnósticos.

Aeroradiospectrometry in the lithological mapping and environmental monitoring of Wadi Araba Area

International Nuclear Information System (INIS)

El-Sadek, Mohamed A.; Ammar, Ahmad A.; Sabry, Ahmad M.

2002-01-01

The aim of this airborne radiospectrometric study is to delineate, modify, and correct the regional lithology as well as to define and monitor the environmental background of Wadi Araba area, Northern Eastern, Egypt. The study uses the aerial radiospectrometric survey data and the regional geological map as the main sources of the information. The aeroradiospectrometric survey data have been statistically analyzed and correlated with the compiled geological map of the area under study. This analysis resulted in the delineation of several new interpreted radiometric lithologic (IRL) units. Corresponding statistical characteristics have been computed and established for each IRL unit in the investigated area. The various four statistical inference tests were applied to the total count (T.C.) radiometric characteristic statistics to determine whether or not a statistically significant difference exists between the computed statistics possessed by the different IRL units (normal distributions) in the studied area. The four tests include the Bartlett's, Analysis of Variance (ANOVA), Fisher's (F) and Students (t). From the results of statistical inference tests, only one group of IRL units from Rod El-Hamal Formation (RHF-2, RHF-3 and RHF-4) as well as only one group from Wadi Irkas Formation (WIF-2, WIF-5 and WIF-7) could be considered as belonging to one and same parent lithological population. Moreover, one pair from Wadi Irkas Formation (WIF-3 and WIF-8), as well as one group (QtS-4, QtS-7 and QtS-8) and three pairs (QtS-3 and QtS-5), (QtS-10 and QtS-17) and (QtS-12 and QtS-13) from Quaternary Sediments could be considered as belonging to one and the same parent lithological populations from the radioactivity point of view. The dose-rate map of the study area shows that the maximum dose-arte value originating from the terrestrial gamma-radiation reaches 0.36 mSv/y. This value is associated with the Rod El-Hamal Formation, which remains in the safe side and within the

Evaluating the effect of lithology on porosity development in ridgetops in the Appalachian Piedmont

Science.gov (United States)

Marcon, V.; Gu, X.; Fisher, B.; Brantley, S. L.

2016-12-01

Together, chemical and physical processes transform fresh bedrock into friable weathered material. Even in systems where lithology, tectonic history, and climatic history are all known, it is challenging to predict the depth of weathering because the mechanisms that control the rate of regolith formation are not understood. In the Appalachian Piedmont, where rates of regolith formation and erosion are thought to be in a rough steady state, the depth of weathering varies with lithology. The Piedmont provides a controlled natural environment to isolate the effects of lithology on weathering processes so we can start to understand the mechanisms that initiate and drive weathering. Weathering is deepest over feldspathic rocks (schist/granite) with regolith 20-30m thick and thinnest over mafic and ultramafic rocks (diabase/serpentinite) with regolith serpentinization reactions and lost from collapse during weathering. Serpentinite consists of easily weathered hydrous minerals with little quartz. Comparatively, rocks with more quartz (e.g. schist) have a supportive skeleton as the rock weathers. This quartz skeleton could prevent the collapse of pores and result in isovolumetric weathering. Non-isovolumetric weathering limits infiltration of reactive fluids deeper into the rock, minimizing regolith formation in serpentinite due to its lack of a quartz skeleton. Given this, fracture toughness may be an important parameter to consider in terms of predicting regolith thickness.

Origins of the Salado, Seven Rivers, and San Andres salt margins in Texas and New Mexico: Revision 1: Topical report

International Nuclear Information System (INIS)

Boyd, S.D.; Murphy, P.J.

1987-02-01

The present boundaries of the San Andres, Seven Rivers, and Salado salts generally lie along the periphery of the Palo Duro and Tucumcari Basins. Various geologic mechanisms occurring singularly or in combination determined the positions of the salt margins. These mechanisms include nondeposition of salt and syndepositional and postdepositional dissolution. In New Mexico, San Andres units pinch out against the Pedernal and Sierra Grande Uplifts, indicating that nondeposition established the original salt margins there. Syndepositional dissolution of exposed Upper San Andres salts occurred in response to Guadalupian upwarp of the basin margins. Triassic erosion differentially removed Permian salt-bearing formations along the uplifts. Late Tertiary dissolution is indicated by fill of north-south trending collapse valleys. In Texas, Guadalupian upwarp along the Amarillo Uplift caused pinchout of Units 2 and 3 in the Lower San Andres and influenced the deposition of subsequent salt-bearing strata. The discontinuity of Upper San Andres evaporites across the Amarillo Uplift suggests syndepositional dissolution. Along the eastern and northeastern basin margin, dissolution may have accompanied Triassic erosion of locally uplifted Upper Permian strata. Tertiary dissolution is recognized beneath anomalously thick Ogallala Formation sections that overlie collasped Permian strata. 49 refs., 31 figs., 2 tabs

Inventario de fuentes de agua superficial en las subcuencas de los ríos Salado y Huayllumayo

OpenAIRE

Autoridad Nacional del Agua. Dirección de Conservación y Planeamiento de Recursos Hídricos; Autoridad Nacional del Agua. Administración Local de Agua Alto Apurímac Velille

2013-01-01

Realiza el inventario de las fuentes de agua superficial, brindando información sobre almacenamientos (lagunas y represas), manantiales, ríos, quebradas, humedales y glaciares de las subcuencas de los ríos Salado, Cañipía y Huayllumayo (ubicadas en Cusco y Puno), con el propósito de conocer su estado situacional y promover la gestión sostenible del recurso hídrico en la cuenca.

Draft Title 40 CFR 191 compliance certification application for the Waste Isolation Pilot Plant. Volume 8: Appendices HYDRO, IRD, LTM, NUTS, PAR, PMR, QAPD, RBP

International Nuclear Information System (INIS)

1995-01-01

Geohydrologic data have been collected in the Los Medanos area at the US Department of Energy's proposed Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico since 1975 as part of a study evaluating the feasibility of storing defense-associated nuclear wastes within the bedded salt of the Salado Formation of Permian age. Drilling and hydrologic testing have identified three principal water-bearing zones above the Salado Formation and one below that could potentially transport wastes to the biosphere if the proposed facility were breached. The zones above the Salado are the contact between the Rustler and Salado Formations and the Culebra and Magenta Dolomite Members of the Rustler Formation of Permian age. The zone below the Salado Formation consists of channel sandstones in the Bell Canyon Formation of the Permian Delaware Mountain Group. Determinations of hydraulic gradients, directions of flow, and hydraulic properties were hindered because of the negligible permeability of the water-bearing zones. Special techniques in drilling, well completion, and hydraulic testing have been developed to determine the hydrologic characteristics of these water-producing zones

Draft Title 40 CFR 191 compliance certification application for the Waste Isolation Pilot Plant. Volume 8: Appendices HYDRO, IRD, LTM, NUTS, PAR, PMR, QAPD, RBP

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-03-31

Geohydrologic data have been collected in the Los Medanos area at the US Department of Energy`s proposed Waste Isolation Pilot Plant (WIPP) site in southeastern New Mexico since 1975 as part of a study evaluating the feasibility of storing defense-associated nuclear wastes within the bedded salt of the Salado Formation of Permian age. Drilling and hydrologic testing have identified three principal water-bearing zones above the Salado Formation and one below that could potentially transport wastes to the biosphere if the proposed facility were breached. The zones above the Salado are the contact between the Rustler and Salado Formations and the Culebra and Magenta Dolomite Members of the Rustler Formation of Permian age. The zone below the Salado Formation consists of channel sandstones in the Bell Canyon Formation of the Permian Delaware Mountain Group. Determinations of hydraulic gradients, directions of flow, and hydraulic properties were hindered because of the negligible permeability of the water-bearing zones. Special techniques in drilling, well completion, and hydraulic testing have been developed to determine the hydrologic characteristics of these water-producing zones.

Summary of lithologic logging of new and existing boreholes at Yucca Mountain, Nevada, March 1994 to June 1994

International Nuclear Information System (INIS)

Geslin, J.K.; Moyer, T.C.

1995-01-01

This report summarizes lithologic logging of core from boreholes at Yucca Mountain, Nevada, conducted from March 1994 to June 1994. Units encountered during logging include Quaternary-Tertiary alluvium and colluvium, Tertiary Rainier Mesa Tuff, all units in the Tertiary Paintbrush Group, and Tertiary Calico Hills Formation. Logging results are presented in a table of contact depths for core from unsaturated zone neutron (UZN) boreholes and graphic lithologic logs for core from north ramp geology (NRG) boreholes

El balance hídrico en la Cuenca del Río Quequén Salado, Argentina

OpenAIRE

Mario Fabián Marini; María Cintia Píccolo

2000-01-01

En este trabajo se determina el balance hídrico de la cuenca del río Quequén Salado y el régimen hidrológico del mismo. La superficie total de la cuenca es de 10.174 km2, y se encuentra en una zona donde las actividades agrícola-ganaderas son importantes. El objetivo principal de esta investigación es calcular los balances hídricos para varias localidades pertenecientes a la cuenca del río principal. Los objetivos secundarios son determinar las disponibilidades hídricas de la c...

Role of Lithology and Rock Structure in Drainage Development in ...

African Journals Online (AJOL)

Lithology and Rock structure play a vital role in the development of Drainage Network in any drainage basin. The drainage patterns upon land surface develop as directed by the underlying lithology and rock structure. In fact, lithology and rock structure together shape the basin and are decisive parameters of nature and ...

Non-Salado flow and transport position paper. Revision 1

International Nuclear Information System (INIS)

Axness, C.; Beauheim, R.; Behl, Y.

1994-01-01

The US Department of Energy (DOE) is preparing to request the US Environmental Protection Agency (EPA) to certify compliance of the Waste Isolation Pilot Plant (WIPP) with long-term requirements of the environmental Radiation Protection Standards for Management and Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Waste (40 CFR Part 191). The DOE must also demonstrate compliance with the long-term requirements of the Land Disposal Restrictions of the Resource Conservation and Recovery Act (RCRA) (40 CFR Part 268.6). Sandia National Laboratories (SNL) has ben conducting iterative performance assessments (PAs) for the the WIPP to provide guidance to the project on the technical activities required to determine long-term performance of the WIPP disposal system. The most recent PA was conducted in 1992. The objectives of this paper are to: (1) Identify and describe the relationship between non-Salado hydrology and the array of scenarios that might be relevant to the long-term performance of the repository. (2) Identify and describe the array of conceptual and mechanistic models that are required to evaluate the scenarios for the purpose of compliance. (3) Identify and describe the data/information that are required to support the conceptual and mechanistic models

Stratigraphy and dissolution of the Rustler Formation

International Nuclear Information System (INIS)

Bachman, G.O.

1985-01-01

The Rustler Formation is the uppermost evaporite-bearing unit in the Permian Ochoan series in southeastern New Mexico. It rests on the Salado Formation which includes the salt beds where the mined facility for the Waste Isolation Pilot Plant (WIPP) is being constructed. An understanding of the physical stratigraphy of the Rustler Formation is pertinent to studies of the WIPP site because some portions of the Rustler are water-bearing and may provide paths for circulating waters to come into contact with, and dissolve, evaporites within the Ochoan sequence. Knowledge of the processes, magnitude, and history of evaporite dissolution in the vicinity of the WIPP site is important to an evaluation of the integrity of the site. 2 refs., 2 figs

Use of bore logging for the determination of lithological characteristics of the Boom clay formation and interest for correlations in clay

International Nuclear Information System (INIS)

Neerdael, B.; Bonne, A.; Manfroy, P.; Vandenberghe, N.; Fierens, E.; Laga, P.

1981-01-01

It is first recalled that the purpose of the HADES project of the CEN/SCK at Mol (Belgium) is to study the possibility of geological disposal for radioactive wastes in the Boom clay formation at a depth between +-160 and 270 m. The different steps and aspects of the site investigation are exposed, and for each of them, the specific techniques used are reviewed. One of these steps is elaborated more in detail. It covers namely the lateral extrapolation of the lithological variations as established from a very detailed analysis of the initial cored boring. Among the usefull methods, the most practical and refined results were obtained from the resistivity logs in the reconnaissance holes. Finally, examples are shown of very detailed correlation on site scale, scale of the hydrogeological entity and regional scale (occurrence of Boom clay on the belgian territory)

Variability in properties of Salado Mass Concrete

International Nuclear Information System (INIS)

Wakeley, L.D.; Harrington, P.T.; Hansen, F.D.

1995-08-01

Salado Mass Concrete (SMC) has been developed for use as a seal component in the Waste Isolation Pilot Plant. This concrete is intended to be mixed from pre-bagged materials, have an initial slump of 10 in., and remain pumpable and placeable for two hours after mixing. It is a mass concrete because it will be placed in monoliths large enough that the heat generated during cement hydration has the potential to cause thermal expansion and subsequent cracking, a phenomenon to avoid in the seal system. This report describes effects on concrete properties of changes in ratio of water to cement, batch size, and variations in characteristics of different lots of individual components of the concrete. The research demonstrates that the concrete can be prepared from laboratory-batched or pre-bagged dry materials in batches from 1.5 ft 3 to 5.0 yd 3 , with no chemical admixtures other than the sodium chloride added to improve bonding with the host rock, at a water-to-cement ratio ranging from 0.36 to 0.42. All batches prepared according to established procedures had adequate workability for at least 1.5 hours, and achieved or exceeded the target compressive strength of 4500 psi at 180 days after casting. Portland cement and fly ash from different lots or sources did not have a measurable effect on concrete properties, but variations in a shrinkage-compensating cement used as a component of the concrete did appear to affect workability. A low initial temperature and the water-reducing and set-retarding functions of the salt are critical to meeting target properties

BILLIARDS: Baseline Instrumented Lithology Lander, Inspector and Asteroid Redirection Demonstration System

Science.gov (United States)

Marcus, Matthew; Sloane, Joshua; Ortiz, Oliver; Barbee, Brent

2015-01-01

BILLIARDS Baseline Instrumented Lithology Lander, Inspector, and Asteroid Redirection Demonstration System Proposed demonstration mission for Billiard-Ball concept Select asteroid pair with natural close approach to minimize cost and complexity Primary Objectives Rendezvous with a small (10m), near Earth (alpha) asteroid Maneuver the alpha asteroid to a collision with a 100m (beta) asteroid Produce a detectable deflection or disruption of the beta asteroid Secondary objectives Contribute knowledge of asteroid composition and characteristics Contribute knowledge of small-body formation Opportunity for international collaboration

Estimation of Lithological Classification in Taipei Basin: A Bayesian Maximum Entropy Method

Science.gov (United States)

Wu, Meng-Ting; Lin, Yuan-Chien; Yu, Hwa-Lung

2015-04-01

In environmental or other scientific applications, we must have a certain understanding of geological lithological composition. Because of restrictions of real conditions, only limited amount of data can be acquired. To find out the lithological distribution in the study area, many spatial statistical methods used to estimate the lithological composition on unsampled points or grids. This study applied the Bayesian Maximum Entropy (BME method), which is an emerging method of the geological spatiotemporal statistics field. The BME method can identify the spatiotemporal correlation of the data, and combine not only the hard data but the soft data to improve estimation. The data of lithological classification is discrete categorical data. Therefore, this research applied Categorical BME to establish a complete three-dimensional Lithological estimation model. Apply the limited hard data from the cores and the soft data generated from the geological dating data and the virtual wells to estimate the three-dimensional lithological classification in Taipei Basin. Keywords: Categorical Bayesian Maximum Entropy method, Lithological Classification, Hydrogeological Setting

Basic data report for drilling and hydrologic testing of drillhole DOE-2 at the Waste Isolation Pilot Plant (WIIP) site

Energy Technology Data Exchange (ETDEWEB)

Mercer, J.W.; Beauheim, R.L.; Snyder, R.P.; Fairer, G.M.

1987-04-01

Drillhole DOE-2 was drilled to investigate a structural depression marked by the downward displacement of stratigraphic markers in the Salado Formation. Contrary to several hypotheses, halite layers were thicker in the lower part of the Salado, not thinner as a result of any removal of halite. The upper Castile anhydrite in Drillhole DOE-2 is anomalously thick and is strongly deformed relative to the anhydrite in adjacent drillholes. In contrast, the halite was <8 ft thick and significantly thinner than usually encountered. The lower Castile anhydrite appears to be normal. The depression within the correlated marker beds in the Salado Formation in Drillhole DOE-2 is interpreted as a result of gravity-driven deformation of the underlying Castile Formation. Several stratigraphic units were hydrologically tested in Drillhole DOE-2. Testing of the unsaturated lower portion of the Dewey Lake Red Beds was unsuccessful because of exceptionally small rates of fluid intake. Drill-stem tests were conducted in five intervals in the Rustler Formation, over the Marker Bed 138-139 interval in the Salado formation, and over three sandstone members of the Bell Canyon Formation. A pumping test was conducted in the Culebra Dolomite Member of the Rustler Formation. Pressure-pulse tests were conducted over the entire Salado Formation. Fluid samples were collected from the Culebra Dolomite Member and from the Hays Member of the Bell Canyon Formation. 31 refs., 31 figs., 5 tabs.

Basic data report for drilling and hydrologic testing of drillhole DOE-2 at the Waste Isolation Pilot Plant (WIIP) site

International Nuclear Information System (INIS)

Mercer, J.W.; Beauheim, R.L.; Snyder, R.P.; Fairer, G.M.

1987-04-01

Drillhole DOE-2 was drilled to investigate a structural depression marked by the downward displacement of stratigraphic markers in the Salado Formation. Contrary to several hypotheses, halite layers were thicker in the lower part of the Salado, not thinner as a result of any removal of halite. The upper Castile anhydrite in Drillhole DOE-2 is anomalously thick and is strongly deformed relative to the anhydrite in adjacent drillholes. In contrast, the halite was <8 ft thick and significantly thinner than usually encountered. The lower Castile anhydrite appears to be normal. The depression within the correlated marker beds in the Salado Formation in Drillhole DOE-2 is interpreted as a result of gravity-driven deformation of the underlying Castile Formation. Several stratigraphic units were hydrologically tested in Drillhole DOE-2. Testing of the unsaturated lower portion of the Dewey Lake Red Beds was unsuccessful because of exceptionally small rates of fluid intake. Drill-stem tests were conducted in five intervals in the Rustler Formation, over the Marker Bed 138-139 interval in the Salado formation, and over three sandstone members of the Bell Canyon Formation. A pumping test was conducted in the Culebra Dolomite Member of the Rustler Formation. Pressure-pulse tests were conducted over the entire Salado Formation. Fluid samples were collected from the Culebra Dolomite Member and from the Hays Member of the Bell Canyon Formation. 31 refs., 31 figs., 5 tabs

Evaluation of the lithology contents and types of clay minerals using downhole spectral analyzer of natural gamma radiation

International Nuclear Information System (INIS)

Zivanov, M.; Savicic, M.; Grbovic, G.

1992-01-01

The microprocessor downhole spectrum analyzer of natural gamma radiation is an important part of the new generation of geophysical well logging systems. This instrument produces complete energy spectra of the penetrated formations. here physical principles of logging are shown. based on the logging results from one of the wells complex lithology was identified, together with shale contents in the formation and types of clay and minerals. (author)

Study on the application of seismic sedimentology in a stratigraphic-lithologic reservoir in central Junggar Basin

Science.gov (United States)

Yu, Yixin; Xia, Zhongmou

2017-06-01

This paper discusses the research idea of description for stratigraphic-lithologic reservoir based on seismic sedimentology methods. The sandstone reservoir of Jurrassic XiShanyao Formation in Junggar Basin is studied according to the theory and approaches of seismic sedimentology. By making full use of borehole data, the technologies of layer correlation based on the stratigraphic sequence framework, the forward seismic modeling, the stratal slicing and lithologic inversion are applied. It describes the range of denudation line, the distribution characteristics of sedimentary facies of the strata, the vertical and horizontal distribution of sand bodies and the favourable oil-gas bearing prospective area. The results shows that study area are dominated braided delta deposition including underwater distributary channel and distributary bay microfacies, the nip-out lines of the formation are northeast to southwest from north to south, the second Middle Jurassic sand body is the most widely distributed one among three sand bodies, the prospective oil-gas bearing area located in the south part and around the YG2 well area. The study result is effective on the practice of exploration in study area.

Salt deposits of Los Medanos Area, Eddy and Lea counties, New Mexico

International Nuclear Information System (INIS)

Jones, C.L.; Cooley, M.E.; Bachman, G.O.

1973-01-01

The salt deposits of Los Medanos area, in Eddy and Lea Counties, southeastern New Mexico, are being considered for possible use as a receptacle for radioactive wastes in a pilot-plant repository. The salt deposits of the area are in three evaporite formations: the Castile, Salado, and Rustler formations, in ascending order. The three formations are dominantly anhydrite and rock salt; but some gypsum, potassium ores, carbonate rock, and fine-grained clastic rocks are present. They have combined thicknesses of slightly more than 4000 feet, of which roughly one-half belongs to the Salado. Both the Castile and the Rustler are richer in anhydrite and poorer in rock salt than the Salado, and they provide this salt-rich formation with considerable protection from any fluids which might be present in underlying or overlying rocks. The Salado Formation contains many thick seams of rock salt at moderate depths below the surface. The rock salt has a substantial cover of well-consolidated rocks, and it is very little deformed structurally. 37 refs., 48 figs., 4 tabs

Geophysical Study of Lithologies Attributes At Isihor Village, Edo ...

African Journals Online (AJOL)

These attributes include depth, thickness of lithologies or rock types beneath the sea level or earth's surface. Geophysical prospect of lithologies in this studied area is vital for many economic and environmental reasons for examples a large portion of the world's fossil fuels such as oil, gas and coal are found in stratified ...

Lithology-dependent In Situ Stress in Heterogeneous Carbonate Reservoirs

Science.gov (United States)

Pham, C. N.; Chang, C.

2017-12-01

Characterization of in situ stress state for various geomechanical aspects in petroleum development may be particularly difficult in carbonate reservoirs in which rock properties are generally heterogeneous. We demonstrate that the variation of in situ stress in highly heterogeneous carbonate reservoirs is closely related to the heterogeneity in rock mechanical property. The carbonate reservoir studied consists of numerous sequential layers gently folded, exhibiting wide ranges of porosity (0.01 - 0.29) and Young's modulus (25 - 85 GPa) depending on lithology. Wellbore breakouts and drilling-induced tensile fractures (DITFs) observed in the image logs obtained from several wells indicate that the in situ state of stress orientation changes dramatically with depth and location. Even in a wellbore, the azimuth of the maximum horizontal stress changes by as much as 60° within a depth interval of 500 m. This dramatic change in stress orientation is inferred to be due to the contrast in elastic properties between different rock layers which are bent by folding in the reservoir. The horizontal principal stress magnitudes are constrained by back-calculating stress conditions necessary to induce the observed wellbore failures using breakout width and the presence of DITFs. The horizontal stresses vary widely, which cannot be represented by a constant stress gradient with depth. The horizontal principal stress gradient increases with Young's modulus of layer monotonically, indicating that a stiffer layer conveys a higher horizontal stress. This phenomenon can be simulated using a numerical modelling, in which the horizontal stress magnitudes depend on stiffness of individual layers although the applied far-field stress conditions are constant. The numerical results also suggest that the stress concentration at the wellbore wall is essentially higher in a stiffer layer, promoting the possibility of wellbore breakout formation. These results are in agreement with our

Basic data report for Drillhole AEC 7 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1983-01-01

AEC 7 is a borehole drilled in western Lea County, New Mexico, in section 31, T.21S.,R.32E. AEC 7 was drilled to 3918 feet in 1974 by Oak Ridge National Laboratory; Sandia deepened the hole to 4732 ft in 1979. The borehole provided stratigraphic and lithologic information in the initial and final drilling. The borehole was used extensively for tests of borehole plugs and plugging operations. AEC 7 penetrated, in descending order, Holocene sands and Mescalero caliche (8 ft), Santa Rosa Sandstone (109 ft), Dewey Lake Red Beds (542 ft), Rustler Formation (325 ft), Salado Formation (2014 ft), Castile Formation (1521 ft), and the upper Bell Canyon Formation (197 ft). Cores were obtained from much of the borehole. An extensive suite of geophysical logs provides information on stratigraphy, lithology, and structure. Beds were in normal stratigraphic sequence and without structural deformation except in the lower Castile. Anhydrite II and Halite II appear to be repeated in the borehole. This section was penetrated during deepening by Sandia; the structural complication is consistent with deformation found nearby in ERDA 6. The potential site on which AEC 7 is located was abandoned in 1976 after ERDA 6 was drilled. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

A lithology identification method for continental shale oil reservoir based on BP neural network

Science.gov (United States)

Han, Luo; Fuqiang, Lai; Zheng, Dong; Weixu, Xia

2018-06-01

The Dongying Depression and Jiyang Depression of the Bohai Bay Basin consist of continental sedimentary facies with a variable sedimentary environment and the shale layer system has a variety of lithologies and strong heterogeneity. It is difficult to accurately identify the lithologies with traditional lithology identification methods. The back propagation (BP) neural network was used to predict the lithology of continental shale oil reservoirs. Based on the rock slice identification, x-ray diffraction bulk rock mineral analysis, scanning electron microscope analysis, and the data of well logging and logging, the lithology was divided with carbonate, clay and felsic as end-member minerals. According to the core-electrical relationship, the frequency histogram was then used to calculate the logging response range of each lithology. The lithology-sensitive curves selected from 23 logging curves (GR, AC, CNL, DEN, etc) were chosen as the input variables. Finally, the BP neural network training model was established to predict the lithology. The lithology in the study area can be divided into four types: mudstone, lime mudstone, lime oil-mudstone, and lime argillaceous oil-shale. The logging responses of lithology were complicated and characterized by the low values of four indicators and medium values of two indicators. By comparing the number of hidden nodes and the number of training times, we found that the number of 15 hidden nodes and 1000 times of training yielded the best training results. The optimal neural network training model was established based on the above results. The lithology prediction results of BP neural network of well XX-1 showed that the accuracy rate was over 80%, indicating that the method was suitable for lithology identification of continental shale stratigraphy. The study provided the basis for the reservoir quality and oily evaluation of continental shale reservoirs and was of great significance to shale oil and gas exploration.

The nevado-filábride complex in the western part of Sierra de los Filabres (Betic Internal Zone), structure and lithologic succession

Energy Technology Data Exchange (ETDEWEB)

Sanz de Galdeano, C.; López Garrido, A.

2016-07-01

In the western part of Sierra de los Filabres (in the Nevado-Filábride Complex, within the Betic Internal Zone) several tectonic units have been described, in varying numbers depending on the author describing them. However, new cartographical data show that the limits of these units pass through the lithological formations without displacing them. Moreover, the rocks belonging to some units that are supposedly situated in a lower tectonic position really belong to higher formations. From bottom to top, these lithological formations are the following: (1) dark schists and quartzites; (2) quartzites, sandstones, sands, lutites, schists, and mica schists; (3) schists; (4) marbles, schists, and mica schists. High-angle reverse faults are associated with the great E-W anticline of Sierra de los Filabres. The existence of sands and apparent lutites visibly interlayered between rocks, such as schists and mica schists with garnets, poses a metamorphic problem that has not as yet been addressed. (Author)

Reconstruction of the 2015 Atacama Floods: Influence of Legacy Mining Deposits in the Salado River Mouth

Science.gov (United States)

Fuenzalida Callejas, M. J.; Contreras Vargas, M. T.; Escauriaza, C. R.

2016-12-01

In March 2015, the Salado watershed in the Atacama Desert was affected by unusual storms that unleashed floods never recorded before in northern Chile. Chañaral, an urban center located at the mouth of the Salado River, suffered the most catastrophic consequences on the population and infrastructure. Several natural and anthropic factors contributed to the magnitude and effects observed in this event. The total precipitation, of more than 80 mm in the upper section of the basin, produced a massive and rapid hyperconcentrated flow from the Andean foothills, which propagated along the channel with high velocities, depositing more than 2 m of mud in Chañaral. The dynamics of the flood in the city was also influenced by mine tailings deposited at the river mouth. The mining industry in this region during the previous century deposited approximately 200 million tons of mine tailings in the Chañaral Bay. The accumulation of this legacy mining deposits at the river mouth changed the local morphodynamics, which exacerbated the impacts of the flood. The objective of this work is to improve our understanding of the factors that affect the hydrodynamic of floods in hyper-arid regions. We perform numerical simulations using data collected in the field to reconstruct the event of March 2015 in Chañaral, integrating hydrological and hydrodynamic models to propagate the hydrograph in the city with high resolution. By using the reconstruction of the hydrograph and peak flow estimated by Wilcox et al., 2016, we simulate the flood using a two-dimensional model of the shallow-water equations, fully coupled with the sediment concentration (Contreras & Escauriaza, 2016). To identify the influence of the tailing deposits on the flow hydrodynamics, we use high-resolution data of the pre- and post-disaster topography. We compare the performance of different methodologies to assess the destructive power of the flood, considering also the influence of the sediment concentration in the

Geologic and well-construction data for the H-10 borehole complex near the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

Science.gov (United States)

Wells, J.G.; Drellack, S.L.

1983-01-01

The H-10 borehole complex, a group of three closely spaced boreholes, is located 3 1/2 miles southeast of the proposed Waste Isolation Pilot Plant site in west-central Lea County, New Mexico. The geological data presented in this report are part of a site-characterization study for the possible storage of defense-associated radioactive wastes within salt beds of the Salado Formation of Permian age. Each borehole was designated to penetrate a distinct water-bearing zone: H-10a (total depth 1 ,318 feet) was completed just below the Magenta Dolomite Member of the Rustler Formation of Permian age; H-10b (total depth 1 ,398 feet) was completed just below the Culebra Dolomite Member of the Rustler Formation; and H-10c (total depth 1,538 feet) was completed below the Rustler Formation-Salado Formation contact. The geologic units penetrated in borehole H-10c are surficial alluvium and eolian sand of Holocene age (0-5 feet); the Mescalero caliche (5-9 feet) and the Gatuna Formation (9-90 feet) of Pleistocene age; formation in the Dockum Group (Chinle Formation, 90-482 feet and Santa Rosa Sandstone, 482-658 feet) of Late Triassic age; and the Dewey Lake Red Beds (658-1,204 feet), the Rustler Formation (1,204-1,501 feet), and part of the Salado Formation (1,501-1,538 feet), all of Permian age. The sections of the Rustler and Salado Formations penetrated by borehole H-10c are complete and contain little or no evidence of dissolution of halite and associated rocks, indicating that the eastward-moving dissolution on top of the Salado, found just to the west of the WIPP site, has not reached the H-10 site. (USGS)

Basic Data Report for Drillhole SNL-12 (C-2954)

Energy Technology Data Exchange (ETDEWEB)

Powers, Dennis W. [Washington Regulatory and Environmental Services (United States)

2005-01-20

SNL-12 (permitted by the New Mexico State Engineer as C-2954) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation near the margin of dissolution of halite in the upper part of the Salado south of the Waste Isolation Pilot Plant (WIPP). SNL-12 is located in the southeast quarter of section 20, T23S, R31E, in eastern Eddy County, New Mexico. SNL-12 was drilled to a total depth of 905 ft below the ground level. Below surface dune sand and the Berino soil, SNL-12 encountered, in order, the Mescalero caliche, Gatu?a, Dewey Lake, Rustler, and uppermost Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Meda?os Members and into the uppermost Salado Formation. Geophysical logs were acquired from the open hole to total depth, and the drillhole was successfully completed with a screened interval open across the Culebra. At SNL-12, the uppermost Salado cores display displacive halite crystals in clastic-rich units below an amalgamated sulfate at the top of the formation. There is no indication of thinning of the upper Salado due to postdepositional dissolution, and this is consistent with predrilling expectations.

Basic Data Report for Drillhole SNL-12 (C-2954) (Waste Isolation Pilot Plant)

International Nuclear Information System (INIS)

Powers, Dennis W.

2005-01-01

SNL-12 (permitted by the New Mexico State Engineer as C-2954) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation near the margin of dissolution of halite in the upper part of the Salado south of the Waste Isolation Pilot Plant (WIPP). SNL-12 is located in the southeast quarter of section 20, T23S, R31E, in eastern Eddy County, New Mexico. SNL-12 was drilled to a total depth of 905 ft below the ground level. Below surface dune sand and the Berino soil, SNL-12 encountered, in order, the Mescalero caliche, Gatu?a, Dewey Lake, Rustler, and uppermost Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Medanos Members and into the uppermost Salado Formation. Geophysical logs were acquired from the open hole to total depth, and the drillhole was successfully completed with a screened interval open across the Culebra. At SNL-12, the uppermost Salado cores display displacive halite crystals in clastic-rich units below an amalgamated sulfate at the top of the formation. There is no indication of thinning of the upper Salado due to postdepositional dissolution, and this is consistent with predrilling expectations.

Summary of lithologic logging of new and existing boreholes at Yucca Mountain, Nevada, August 1993 to February 1994

Energy Technology Data Exchange (ETDEWEB)

Geslin, J.K.; Moyer, T.C.; Buesch, D.C.

1995-05-01

Yucca Mountain, Nevada, is being investigated as a potential site for a high-level radioactive waste repository. This report summarizes the lithologic logging of new and existing boreholes at Yucca Mountain that was done from August 1993 to February 1994 by the Rock Characteristics Section, Yucca Mountain Project Branch, US Geological Survey (USGS). Units encountered during logging include Quaternary-Tertiary alluvium/colluvium, Tertiary Rainier Mesa Tuff, all units in the Tertiary Paintbrush Group, Tertiary Calico Hills Formation and Tertiary Prow Pass Tuff. We present criteria used for recognition of stratigraphic contacts, logging results as tables of contact depths for core from neutron (UZN) boreholes and graphical lithologic logs for core from non-UZN boreholes, and descriptions of several distinctive nonwelded tuffs recognized in the PTn hydrogeologic unit of the Paintbrush Group.

Summary of lithologic logging of new and existing boreholes at Yucca Mountain, Nevada, August 1993 to February 1994

International Nuclear Information System (INIS)

Geslin, J.K.; Moyer, T.C.; Buesch, D.C.

1995-01-01

Yucca Mountain, Nevada, is being investigated as a potential site for a high-level radioactive waste repository. This report summarizes the lithologic logging of new and existing boreholes at Yucca Mountain that was done from August 1993 to February 1994 by the Rock Characteristics Section, Yucca Mountain Project Branch, US Geological Survey (USGS). Units encountered during logging include Quaternary-Tertiary alluvium/colluvium, Tertiary Rainier Mesa Tuff, all units in the Tertiary Paintbrush Group, Tertiary Calico Hills Formation and Tertiary Prow Pass Tuff. We present criteria used for recognition of stratigraphic contacts, logging results as tables of contact depths for core from neutron (UZN) boreholes and graphical lithologic logs for core from non-UZN boreholes, and descriptions of several distinctive nonwelded tuffs recognized in the PTn hydrogeologic unit of the Paintbrush Group

Aves acuáticas del estero El Salado, Puerto Vallarta, Jalisco

Directory of Open Access Journals (Sweden)

Fabio Germán Cupul Magaña

2015-06-01

Full Text Available El estero El Salado es un cuerpo costero único en la región de Bahía de Banderas, México, que se encuentra sometido a la fuerte presión del crecimiento urbano de la ciudad de Puerto Vallarta, Jalisco. Su evaluación como hábitat para la avifauna acuática puede contribuir al establecimiento de las bases técnicas para la toma de decisiones acertadas en el diseño de estrategias de conservación y explotación de sus hábitats. Con este fin, de junio de 1996 a mayo de 1997, se realizó una visita mensual al estero. En cada visita se realizaron dos transectos de 250 m de largo, de la boca a la cabeza del estero, de acuerdo al método modificado del censo de transecto en banda. Se determinaron 28 especies de aves acuáticas y se contabilizaron 1,304 individuos. De acuerdo con su presencia a lo largo del año, se registraron 16 especies residentes, 11 residentes de invierno y una migratoria. Los resultados ponen de manifiesto la importancia de la zona como espacio de sustentación alimenticia, de descanso y de anidación para aves acuáticas temporales y residentes.

Examination of Multiple Lithologies Within the Primitive Ordinary Chondrite NWA 5717

Science.gov (United States)

Cato, M. J.; Simon, J. I.; Ross, D. K.; Morris, R. V.

2017-01-01

Northwest Africa 5717 is a primitive (subtype 3.05) ungrouped ordinary chondrite which contains two apparently distinct lithologies. In large cut meteorite slabs, the darker of these, lithology A, looks to host the second, much lighter in color, lithology B (upper left, Fig. 1). The nature of the boundary between the two is uncertain, ranging from abrupt to gradational and not always following particle boundaries. The distinction between the lithologies, beyond the obvious color differences, has been supported by a discrepancy in oxygen isotopes and an incongruity in the magnesium contents of chondrule olivine. Here, quantitative textural analysis and mineralogical methods have been used to investigate the two apparent lithologies within NWA 5717. Olivine grains contained in a thin section from NWA 7402, thought to be paired to 5717, were also measured to re-examine the distinct compositional range among the light and dark areas. Procedure: Particles from a high-resolution mosaic image of a roughly 13x15cm slice of NWA 5717 were traced in Adobe Photoshop. Due to the large size of the sample, visually representative regions of each lithology were chosen to be analyzed. The resulting layers of digitized particles were imported into ImageJ, which was used to measure their area, along with the axes, the angle from horizontal, and the centroid coordinates of ellipses fitted to each particle following the approach. Resulting 2D pixel areas were converted to spherical diameters employing the unfolding algorithm, which outputs a 3D particle size distribution based on digitized 2D size frequency data. Spatstat was used to create kernel density plots of the centroid coordinates for each region. X-ray compositional maps, microprobe analyses, and Mossbauer spectroscopy was conducted on a thin section of NWA 7402, tentatively paired to NWA 5717.

A Lithology Based Map Unit Schema For Onegeology Regional Geologic Map Integration

Science.gov (United States)

Moosdorf, N.; Richard, S. M.

2012-12-01

A system of lithogenetic categories for a global lithological map (GLiM, http://www.ifbm.zmaw.de/index.php?id=6460&L=3) has been compiled based on analysis of lithology/genesis categories for regional geologic maps for the entire globe. The scheme is presented for discussion and comment. Analysis of units on a variety of regional geologic maps indicates that units are defined based on assemblages of rock types, as well as their genetic type. In this compilation of continental geology, outcropping surface materials are dominantly sediment/sedimentary rock; major subdivisions of the sedimentary category include clastic sediment, carbonate sedimentary rocks, clastic sedimentary rocks, mixed carbonate and clastic sedimentary rock, colluvium and residuum. Significant areas of mixed igneous and metamorphic rock are also present. A system of global categories to characterize the lithology of regional geologic units is important for Earth System models of matter fluxes to soils, ecosystems, rivers and oceans, and for regional analysis of Earth surface processes at global scale. Because different applications of the classification scheme will focus on different lithologic constituents in mixed units, an ontology-type representation of the scheme that assigns properties to the units in an analyzable manner will be pursued. The OneGeology project is promoting deployment of geologic map services at million scale for all nations. Although initial efforts are commonly simple scanned map WMS services, the intention is to move towards data-based map services that categorize map units with standard vocabularies to allow use of a common map legend for better visual integration of the maps (e.g. see OneGeology Europe, http://onegeology-europe.brgm.fr/ geoportal/ viewer.jsp). Current categorization of regional units with a single lithology from the CGI SimpleLithology (http://resource.geosciml.org/201202/ Vocab2012html/ SimpleLithology201012.html) vocabulary poorly captures the

Geologic and well-construction data for the H-10 borehole complex near the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

International Nuclear Information System (INIS)

Wells, J.G.; Drellack, S.L. Jr.

1983-01-01

The H-10 borehole complex, a group of three closely spaced boreholes, is located 4 miles southeast of the proposed Waste Isolation Pilot Plant site in west-central Lea County, New Mexico. The holes were drilled during August and October 1979 to obtain geologic and hydrologic data to better define the regional ground-water-flow system. The geologic data presented in this report are part of a site-characterization study for the possible storage of defense-associated radioactive wastes within salt beds of the Salado Formation of Permian age. The geologic data include detailed descriptions of cores, cuttings, and geophysical logs. Each borehole was designed to penetrate a distinct water-bearing zone: H-10a (total depth 1318 feet) was completed just below the Magenta Dolomite Member of the Rustler Formation of Permian age; H-10b (total depth 1398 feet) was completed just below the Culebra Dolomite Member of the Rustler Formation; and H-10c (total depth 1538 feet) was completed below the Rustler Formation-Salado Formation contact. The geologic units penetrated in borehole H-10c are surficial alluvium and eolian sand of Holocene age (0 to 5 feet); the Mescalero caliche (5 to 9 feet) and the Gatuna Formation (9 to 90 feet) of Pleistocene age: formations in the Dockum Group (Chinle Formation, 90 to 482 feet and Santa Rosa Sandstone, 482 to 658 feet) of Late Triassic age; and the Dewey Lake Red Beds (658 to 1204 feet), the Rustler Formation (1204 to 1501 feet), and part of the Salado Formation (1501 to 1538 feet), all of Permian age. The sections of the Rustler and Salado Formations penetrated by borehole H-10c are complete and contain little or no evidence of dissolution of halite and associated rocks, indicating that the eastward-moving dissolution within the Rustler or on top of the Salado, found west of the Waste Isolation Pilot Plant site, has not reached the H-10 site

Evaluating the Use of an Object-Based Approach to Lithological Mapping in Vegetated Terrain

Directory of Open Access Journals (Sweden)

Stephen Grebby

2016-10-01

Full Text Available Remote sensing-based approaches to lithological mapping are traditionally pixel-oriented, with classification performed on either a per-pixel or sub-pixel basis with complete disregard for contextual information about neighbouring pixels. However, intra-class variability due to heterogeneous surface cover (i.e., vegetation and soil or regional variations in mineralogy and chemical composition can result in the generation of unrealistic, generalised lithological maps that exhibit the “salt-and-pepper” artefact of spurious pixel classifications, as well as poorly defined contacts. In this study, an object-based image analysis (OBIA approach to lithological mapping is evaluated with respect to its ability to overcome these issues by instead classifying groups of contiguous pixels (i.e., objects. Due to significant vegetation cover in the study area, the OBIA approach incorporates airborne multispectral and LiDAR data to indirectly map lithologies by exploiting associations with both topography and vegetation type. The resulting lithological maps were assessed both in terms of their thematic accuracy and ability to accurately delineate lithological contacts. The OBIA approach is found to be capable of generating maps with an overall accuracy of 73.5% through integrating spectral and topographic input variables. When compared to equivalent per-pixel classifications, the OBIA approach achieved thematic accuracy increases of up to 13.1%, whilst also reducing the “salt-and-pepper” artefact to produce more realistic maps. Furthermore, the OBIA approach was also generally capable of mapping lithological contacts more accurately. The importance of optimising the segmentation stage of the OBIA approach is also highlighted. Overall, this study clearly demonstrates the potential of OBIA for lithological mapping applications, particularly in significantly vegetated and heterogeneous terrain.

Linking descriptive geology and quantitative machine learning through an ontology of lithological concepts

Science.gov (United States)

Klump, J. F.; Huber, R.; Robertson, J.; Cox, S. J. D.; Woodcock, R.

2014-12-01

Despite the recent explosion of quantitative geological data, geology remains a fundamentally qualitative science. Numerical data only constitute a certain part of data collection in the geosciences. In many cases, geological observations are compiled as text into reports and annotations on drill cores, thin sections or drawings of outcrops. The observations are classified into concepts such as lithology, stratigraphy, geological structure, etc. These descriptions are semantically rich and are generally supported by more quantitative observations using geochemical analyses, XRD, hyperspectral scanning, etc, but the goal is geological semantics. In practice it has been difficult to bring the different observations together due to differing perception or granularity of classification in human observation, or the partial observation of only some characteristics using quantitative sensors. In the past years many geological classification schemas have been transferred into ontologies and vocabularies, formalized using RDF and OWL, and published through SPARQL endpoints. Several lithological ontologies were compiled by stratigraphy.net and published through a SPARQL endpoint. This work is complemented by the development of a Python API to integrate this vocabulary into Python-based text mining applications. The applications for the lithological vocabulary and Python API are automated semantic tagging of geochemical data and descriptions of drill cores, machine learning of geochemical compositions that are diagnostic for lithological classifications, and text mining for lithological concepts in reports and geological literature. This combination of applications can be used to identify anomalies in databases, where composition and lithological classification do not match. It can also be used to identify lithological concepts in the literature and infer quantitative values. The resulting semantic tagging opens new possibilities for linking these diverse sources of data.

Characterizing hydrogeologic heterogeneity using lithologic data

International Nuclear Information System (INIS)

Flach, G.P.; Hamm, L.L.; Harris, M.K.; Thayer, P.A.; Haselow, J.S.; Smits, A.D.

1995-01-01

Large-scale (> 1 m) variability in hydraulic conductivity is usually the main influence on field-scale groundwater flow patterns and dispersive transport. Sediment lithologic descriptions and geophysical logs typically offer finer spatial resolution, and therefore more potential information about site-scale heterogeneity, than other site characterization data. In this study, a technique for generating a heterogeneous, three-dimensional hydraulic conductivity field from sediment lithologic descriptions is presented. The approach involves creating a three-dimensional, fine-scale representation of mud (silt + clay) percentage using a stratified interpolation algorithm. Mud percentage is then translated into horizontal and vertical conductivity using direct correlations derived from measured data and inverse groundwater flow modeling. Lastly, the fine-scale conductivity fields are averaged to create a coarser grid for use in groundwater flow and transport modeling. The approach is demonstrated using a finite-element groundwater flow model of a Savannah River Site solid radioactive and hazardous waste burial ground. Hydrostratigraphic units in the area consist of fluvial, deltaic, and shallow marine sand, mud and calcareous sediment that exhibit abrupt facies changes over short distances

Deep-seated salt dissolution in the Delaware basin, Texas and New Mexico

International Nuclear Information System (INIS)

Anderson, R.Y.

1981-01-01

Patterns of salt dissolution in the Delaware Basin are related to the bedrock geometry and hydrology that developed following uplift, tilting, and erosion in the late Cenozoic, and the greatest volume of salt has been removed since that time. During the Permian, some salt was dissolved from the top of the Castile Formation before deposition of the Salado Formation and from the top of the Salado before deposition of the Rustler Formation. In addition, some salt dissolution occurred after the Permian and before the Cretaceous. Post-uplift surface dissolution has progressed across the Delaware Basin from south to north and west to east and generally down the regional dip. Deep-seated dissolution has occurred around the margin of the basin where the Capitan Limestone aquifer is in contact with the Permian evaporites and within the basin where selective dissolution in the lower Salado has undercut the overlying salt beds of the middle and upper Salado. Dissolution has not advanced down regional dip uniformly but has left outliers of salt and has progressed selectively into structurally predisposed areas. This selective advance has significance for the stability of the U.S. Department of Energy's Waste Isolation Pilot Plant (WIPP) site

Basic data report for drillhole ERDA 6 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1983-01-01

ERDA 6 was drilled in eastern Eddy County, New Mexico, to investigate a candidate site for a nuclear waste repository. The site was subsequently rejected on the basis of geological data. ERDA 6 was drilled in the NE 1/4 SE 1/4, section 35, T21S,R31E. The borehole encountered, from top to bottom, 17 ft of Quaternary deposits, 55 ft of the Triassic Santa Rosa Sandstone, 466 ft of the Dewey Lake Red Beds, 273 ft of the Rustler Formation, 1785.5 ft of the Salado Formation and 374.5 ft of the upper Castile Formation, all of Permian age. Cores or drill cuttings were taken throughout the hole. A suite of wireline geophysical logs was run to a depth of 883 ft to facilitate the recognition and correlation of rock units, to assure identification of major lithologies and to provide depth determinations independent of drill-pipe measurements. The site at ERDA 6 was rejected because the structure of the lower Salado and the Castile is too severe to develop a repository along a single set of beds. The borehole also intersected a reservoir of pressurized brine and gas at about 2710'. The pore volume for the reservoir was estimated to be in the range from about 200,000 to about 2 million barrels. ERDA 6 was re-entered in 1981 by the Department of Energy (DOE) for the purpose of further testing the brine reservoir. Those tests are described in separate reports by the DOE and its contractors. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Basic data report for drillhole ERDA 6 (Waste Isolation Pilot Plant - WIPP)

Energy Technology Data Exchange (ETDEWEB)

1983-01-01

ERDA 6 was drilled in eastern Eddy County, New Mexico, to investigate a candidate site for a nuclear waste repository. The site was subsequently rejected on the basis of geological data. ERDA 6 was drilled in the NE 1/4 SE 1/4, section 35, T21S,R31E. The borehole encountered, from top to bottom, 17 ft of Quaternary deposits, 55 ft of the Triassic Santa Rosa Sandstone, 466 ft of the Dewey Lake Red Beds, 273 ft of the Rustler Formation, 1785.5 ft of the Salado Formation and 374.5 ft of the upper Castile Formation, all of Permian age. Cores or drill cuttings were taken throughout the hole. A suite of wireline geophysical logs was run to a depth of 883 ft to facilitate the recognition and correlation of rock units, to assure identification of major lithologies and to provide depth determinations independent of drill-pipe measurements. The site at ERDA 6 was rejected because the structure of the lower Salado and the Castile is too severe to develop a repository along a single set of beds. The borehole also intersected a reservoir of pressurized brine and gas at about 2710'. The pore volume for the reservoir was estimated to be in the range from about 200,000 to about 2 million barrels. ERDA 6 was re-entered in 1981 by the Department of Energy (DOE) for the purpose of further testing the brine reservoir. Those tests are described in separate reports by the DOE and its contractors. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes.

Geohydrology of the proposed Waste Isolation Pilot Plant site in southeastern New Mexico

International Nuclear Information System (INIS)

Mercer, J.W.; Gonzalez, D.D.

1981-01-01

The proposed site for the U.S. Department of Energy's Waste Isolation Pilot Plant (WIPP) is in the Los Medanos area located about 40 km east of Carlsbad, in eastern Eddy County, NM. Geohydrologic data have been collected from this area since 1972, and the data will be used as part of a study evaluating the feasibility of storing defense-associated transuranic wastes in bedded salt at a depth of 655 m. The salt beds are within the Salado Formation of Permian age. The study presented includes the determination of ground-water flow boundaries; potentiometric heads; ground-water chemistry; and hydraulic properties through pump, slug, pressure-pulse, and tracer tests. Data collected during drilling and testing 30 hydrologic holes have indicated three zones above the Salado Formation that could potentially transport wastes to the biosphere if the proposed facility is breached. These zones include the Magenta and Culebra Dolomite members of the Rustler Formation and the contact zone between the Rustler and Salado formations

Cyclostratigraphic analysis of the Middle to lower Upper Ordovician Postolonnec Formation in the Armorican Massif (France): integrating pXRF, gammay-ray and lithological data

Science.gov (United States)

Sinnesael, Matthias; Loi, Alfredo; Dabard, Marie-Pierre; Vandenbroucke, Thijs; Claeys, Philippe

2017-04-01

The Middle to lower Upper Ordovician sections of the Crozon Peninsula area (Postolonnec Formation, Armorican Massif, western France) show multi-order eustatic sea-level changes (Dabard et al., 2015). The sections are characterized by siliciclastic facies, which were deposited in tidal to storm-dominated shelf environments. Dabard et al. (2015) analysed the facies, their stacking patterns, and gamma-ray data and applied backstripping to identify subsidence and several orders of sea-level change. The main stratigraphic constraints are coming from (chitinozoan) biostratigraphy. The 3th to 5th orders changes are hypothesized to correspond to various frequencies related to astronomical forcing. This study investigates the potential added value of portable X-Ray Fluorescence (pXRF) and the application of spectral analyses. High-resolution (cm-scale) non-destructive pXRF and natural gamma-ray measurements were carried out on 14 m of section that was equally logged on a cm resolution. The pXRF measurements on the surface of the outcrops are compared with earlier results of wavelength dispersive XRF spectrometry and ICP-MS. The potassium records of the pXRF and gamma-ray logs are comparable and essentially reflect lithological variations (i.e., between mudstone and coarse sandstones). Other reliably measured elements also reflected lithological aspects such as clay-sandstone alternations (e.g. K, Rb, Ti), placer locations (Zr, Ce, Ti) and potentially clay mineralogy and condensation horizons (Ni, Zn, Co, Mn). Spectral analyses of the various proxies (lithology, natural gamma-ray and pXRF) are compared with each other. Both the new high-resolution data (14 m of section) as well as the published low-resolution data (which span almost 400 m of Darriwilian-Sandbian) were analyzed. The study reveals strong indications for the imprint of obliquity, precession and eccentricity. Obtaining age constraints, in addition to the existing biostratigraphical framework is a challenge in

Basic data report for drillhole AEC 8 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1983-01-01

AEC 8 was originally drilled in 1974 to a depth of 3028 ft by Oak Ridge National Laboratory as part of the initial investigations of a site for radioactive waste disposal. In 1976, Sandia National Laboratories deepened the borehole from the top of the Castile Formation into the Bell Canyon Formation to test the hydraulic properties of the Bell Canyon. The borehole encountered in descending order Holocene sands (20 ft), Mescalero caliche (6 ft), Santa Rosa Sandstone (143 ft), Dewey Lake Redbeds (491 ft), Rustler Formation (322 ft), Salado Formation (1990 ft), Castile Formation (1335 ft), and the upper Bell Canyon Formation (603 ft). The borehole stratigraphy is in normal order and there is no significant deformation. An extensive suite of geophysical logs provides information on the lithology and stratigraphy. The potentiometric surfaces of Bell Canyon fluid-bearing zones are 550 ft (for the zone at 4821 ft to 4827 ft) and 565 ft below land surface (for the zone at 4844 to 4860 ft). The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Pena de muerte en Colombia visión formal y visión real. Estudio de Caso: La masacre de El Salado

OpenAIRE

Carrillo Flórez, Mónica Julie

2013-01-01

Este trabajo final de grado evalúa la existencia de la pena de muerte en Colombia en su visión formal y real, a través del estudio de caso de la masacre de El Salado, en la cual las Autodefensas Unidas de Colombia toman la justicia en sus manos ejecutando a más de 60 civiles. Inicialmente se hace una descripción de cómo se ha tratado el tema de la pena de muerte a lo largo de la historia, dando una breve apreciación de lo que representa y ha representado para la civilización occidental, así ...

Basic data report for drillhole WIPP 12 (Waste Isolation Pilot Plant-WIPP)

International Nuclear Information System (INIS)

1982-10-01

WIPP 12 is a borehole drilled in eastern Eddy County, New Mexico, to investigate the stratigraphy, structure and lithology in the WIPP area. WIPP 12 was drilled in section 17, T22S,R31E, between November 9 and December 7, 1978. The hole was drilled to a depth of 2785.8 ft. It encountered from top to bottom, 16.2 ft of sand, 3 ft of Mescalero Caliche and 9.6 ft of the Gatuna Formation, all of Quaternary age; 138.2 ft of the Triassic Santa Rosa Formation, 483 ft of the Dewey Lake Red Beds, 326 ft of the Rustler Formation, 1771.5 ft of the Salado Formation, and 48.3 ft of the Castile Formation, all of Permian age. Cores or cuttings were obtained for the entire hole. A suite of geophysical logs, including neutron gamma and density curves, was run to the full depth of WIPP 12. The borehole demonstrated that the elevation of the top of the Castile is about 160' above the same horizon in ERDA 9. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Del desastre de Getares a la victoria del Salado : la crítica situación de la zona del Estrecho en 1340

Directory of Open Access Journals (Sweden)

Manuel López Fernández

2007-01-01

Full Text Available A comienzos de 1340 se presagiaba en el Estrecho de Gibraltar una ofensiva meriní. Castilla contaba con una flota insuficiente para frenar a los musulmanes y el reino de Aragón, que también colaboraba en la vigilancia de aquellas aguas, había reducido sus efectivos al mínimo. Así las cosas, en el mes de abril la flota castellano-aragonesa sufrió una aplastante derrota en la Ensenada de Getares, a la que siguió el traslado de un importante contingente marroquí a la Península y el posterior cerco a Tarifa. Alfonso XI, con la ayuda del rey de Portugal, acudió a descercar esta plaza y acabó imponiéndose en la batalla del Salado. Las consecuencias posteriores de esta victoria resultaron fundamentales para el dominio del Estrecho.At the beginning of 1340, a Merini attack was expected in the Straits of Gibraltar. The kingdom of Castile had an inadequate navy to stop the Muslims, and the Aragón’s kingdom, which also helped in the surveillance of that sea area, had reduced his troops to the minimum. In April, the Castilian - Aragonese navy suffered a crushing defeat in the Getares inlet, followed by the pass of one important Moroccans’ contingent to the Peninsula and the later siege to Tarifa. Alfonso XI, with the help of the King of Portugal, came to free the city from the siege, and later on he won the Salado Battle. The subsequent consequences of this victory were essential for the Straits control.

The effects of lithology and base level on topography in the northern alpine foreland

Science.gov (United States)

Baumann, Sebastian; Robl, Jörg; Prasicek, Günther; Salcher, Bernhard; Keil, Melanie

2018-07-01

The evolution of topography is driven by climate and tectonics, and strongly influenced by substrate properties and different base levels. The contributions of these factors may vary in space and time and are thus difficult to disentangle. Our study area, the Hausruck-Kobernaußerwald range, has a rather uniform climatic and tectonic history but is drained by rivers with different base levels and consists of contrasting sedimentary rocks, mainly due to different sedimentation environments. This makes them an ideal location to study the effects of lithology and base level on topography. To decipher the roles of these influences, we used a high-resolution digital elevation model and performed a series of morphometric analyses. Longitudinal river profiles indicate that all channels in the study area, independent from base level, bed rock and overall morphological expression, are well graded. Hypsometry shows no evidence for base level effects on the present topography, while variations in the hypsometric curves coincide with lithological differences. This is also reflected in contrasts of mean elevation and slope distributions. Lithology-dependent variations in channel concavity and catchment-wide hypsometric integrals show that lithology controls both channel incision and hillslope processes in the study area. Our results further indicate that variations in channel and catchment metrics are not linked to the prevalence of different rock types alone, but to different successions of lithological units along the channels and within the catchments. Variations in channel slope and geomorphological mapping suggest that lithology-dependent landsliding is the dominant process causing the observed large-scale landscape diversity in the Hausruck-Kobernaußerwald range.

Nationwide lithological interpretation of cone penetration tests using neural networks

Science.gov (United States)

van Maanen, Peter-Paul; Schokker, Jeroen; Harting, Ronald; de Bruijn, Renée

2017-04-01

The Geological Survey of the Netherlands (GSN) systematically produces 3D stochastic geological models of the Dutch subsurface. These voxel models are regarded essential in answering subsurface-related questions on, for example, aggregate resource potential, groundwater flow, land subsidence hazard and the planning and realization of large-scale infrastructural works. GeoTOP is the most recent and detailed generation of 3D voxel models. This model describes 3D stratigraphical and lithological variability up to a depth of 50 m using voxels of 100 × 100 × 0.5 m. Currently, visually described borehole samples are the primary input of these large-scale 3D geological models, both when modeling architecture and composition. Although tens of thousands of cone penetration tests (CPTs) are performed each year, mainly in the reconnaissance phase of construction activities, these data are hardly used as geological model input. There are many reasons why it is of interest to utilize CPT data for geological and lithological modeling of the Dutch subsurface, such as: 1) CPTs are more abundant than borehole descriptions, 2) CPTs are cheaper and easier to gather, and 3) CPT data are more quantitative and uniform than visual sample descriptions. This study uses CPTs and the lithological descriptions of associated nearby undisturbed drilling cores collected by the GSN to establish a nationwide reference dataset for physical and chemical properties of the shallow subsurface. The 167 CPT-core pairs were collected at 160 locations situated in the North, West and South of the Netherlands. These locations were chosen to cover the full extent of geological units and lithological composition in the upper 30 to 40 m of the subsurface in these areas. The distance between the CPT location and associated borehole is small, varying between 0 and 30 m, with an average of 6 m. For each 2 cm CPT interval the data was automatically annotated with the lithoclass from the associated core using a

water quality of the high-montane Juan Cojo and El Salado's basins (Glrardota - Antioqula, Colombia)

International Nuclear Information System (INIS)

Gomez Marin, Ana Maria; Naranjo Fernandez, Dario; Martinez, Andres Alfonso; Gallego Suarez, Dario de Jesus

2007-01-01

This work is a preliminary diagnosis of the actual state of the high-montane water sources located in the Juan Cojo's and El Salado's basins of the NE side of the Aburra valley' both belong to the Girardota municipality (6 degrades 20.951' N, 75 celsius 27.199' W between 1900 and 2500 meter above sea level in the central montane chain. in order to achieve this work several samples were taken in august 10, 11, 17 and 19 of 2004. this preliminary study includes the physicochemical and microbiological evaluation of 30 sampling points. just one of the 30 sampling points exhibited absence of microbiological pollution due to fecal and total coliforms. this fact suggests bad practices in the final disposal of domestic and farming water residuals. in the other hand, the physicochemical and the ICA (water quality index) evaluation reveal that the sampled water sources exhibit typical characteristics of common low-montane ,non-polluted water sources. in other words, although pollution levels found in those water sources are not alarming, they do not exhibit the typical pollution levels found in natural high-montane waters, as they should, even we could find some sampling points with meso-eutrophic conditions

Lithological control on gas hydrate saturation as revealed by signal classification of NMR logging data

Science.gov (United States)

Bauer, Klaus; Kulenkampff, Johannes; Henninges, Jan; Spangenberg, Erik

2015-09-01

In this paper, nuclear magnetic resonance (NMR) downhole logging data are analyzed with a new strategy to study gas hydrate-bearing sediments in the Mackenzie Delta (NW Canada). In NMR logging, transverse relaxation time (T2) distribution curves are usually used to determine single-valued parameters such as apparent total porosity or hydrocarbon saturation. Our approach analyzes the entire T2 distribution curves as quasi-continuous signals to characterize the rock formation. We apply self-organizing maps, a neural network clustering technique, to subdivide the data set of NMR curves into classes with a similar and distinctive signal shape. The method includes (1) preparation of data vectors, (2) unsupervised learning, (3) cluster definition, and (4) classification and depth mapping of all NMR signals. Each signal class thus represents a specific pore size distribution which can be interpreted in terms of distinct lithologies and reservoir types. A key step in the interpretation strategy is to reconcile the NMR classes with other log data not considered in the clustering analysis, such as gamma ray, hydrate saturation, and other logs. Our results defined six main lithologies within the target zone. Gas hydrate layers were recognized by their low signal amplitudes for all relaxation times. Most importantly, two subtypes of hydrate-bearing shaly sands were identified. They show distinct NMR signals and differ in hydrate saturation and gamma ray values. An inverse linear relationship between hydrate saturation and clay content was concluded. Finally, we infer that the gas hydrate is not grain coating, but rather, pore filling with matrix support is the preferred growth habit model for the studied formation.

Lithologic boundaries from gravity and magnetic anomalies over ...

Indian Academy of Sciences (India)

67

The data was acquired at ~25 m spacing. The surveys were taken for determination of lithological boundaries, depths and nature of causative source using Euler depth solutions and radially averaged power spectrum (RAPS). Residual anomaly maps of gravity and magnetic. Manuscript. Click here to view linked References.

Basic data report for deepening of drillhole WIPP 13 (Waste Isolation Pilot Plant-WIPP)

International Nuclear Information System (INIS)

1982-10-01

WIPP 13 is a borehole drilled in eastern Eddy County, New Mexico, in section 17, T22S,R31E, in order to investigate a subsurface seismic disturbed zone. The first 1035 ft of the borehole were drilled in July and August 1978. The deepening of WIPP 13 was performed in 1979 between August and October. This report documents the deepening of WIPP 13 to 3861.8 ft. Only rocks of the Permian, Salado and Castile Formations were penetrated in the deepening. Cores were obtained for some portions of the hole and cuttings were collected from some of the sections which were not cored (see Table 1). A suite of geophysical logs was run to provide information on lithology, structure and geochemistry. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Basic data report for drillhole WIPP 26 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1979-08-01

WIPP 26 was drilled in Nash Draw (SE 1/4 NE 1/4, sec. 29, T22S, R30E) in Eddy County, New Mexico, to determine subsurface stratigraphy and examine dissolution features above undisturbed salt in the Salado Formation. Determination of dissolution rates will refine previous estimates and provide short-term (geologically) rates for WIPP risk assessments. The borehole encountered, from top to bottom, surficial deposits (10 ft with full materials for pad), Rustler Formation (299 ft), and the upper 194 ft of the Salado Formation. A dissolution residue, 11 ft thick, is at the top of the Salado Formation overlying halite-rich beds. In addition to obtaining nearly continuous core from the surface to total depth (503 ft), geophysical logs were taken to measure acoustic velocities, density, radioactivity, and formation resistivity. An interpretive report on dissolution in Nash Draw will be based on combined borehole basin data, surface mapping, and laboratory analyses of Nash Draw rocks and fluids. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes and to then be converted to a repository. The WIPP will also provide research facilities for interactions between high-level waste and salt

Geologic and well-construction data for the H-8 borehole complex near the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

Science.gov (United States)

Wells, J.G.; Drellack, S.L.

1982-01-01

The H-8 complex, a group of three closely-spaced boreholes, is located 9 miles south of the proposed Waste Isolation Pilot Plant site in southeastern Eddy County, New Mexico. The holes were drilled during July, August, and September of 1979 to obtain geologic and hydrologic data to better define the regional ground-water-flow system. The geologic data presented in this report are part of a site-characterization study for the possible disposal of defense-associated radioactive wastes within salt beds of the Salado Formation of Permian age. The geologic data include detailed descriptions of cores, cuttings, and geophysical logs. Each borehole was designed to penetrate a distinct water-bearing zone: H-8a (total depth 505 feet) was completed just below the Magenta Dolomite Member of the Rustler Formation of Permian Age; H-8b (total depth 624 feet) was completed just belows the Culebra Dolomite Member of the Rustler Formation; and H-8c (total depth 808 feet) was completed just below the Rustler Formation-Salado Formation contact. The geologic units penetrated in borehole H-8c are surficial alluvium and eolian sand of Holocene age (0-4 feet); the Mescalero caliche (4-10 feet) and Gatuna Formation (10-153 feet) , both of Pleistocene age; and the Dewey Lake Red Beds (153-399 feet), the Rustler Formation (399-733 feet), and part of the Salado Formation penetrated by borehole H-8c is composed of residue from dissolution of halite and associated rocks, and the hydration of anhydrite to gypsum, indicating that the eastward-moving dissolution front on top of the Salado, found just to the west of the WIPP site, has reached the H-8 site. (USGS)

Development of stochastic indicator models of lithology, Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Rautman, C.A.; Robey, T.H.

1994-01-01

Indicator geostatistical techniques have been used to produce a number of fully three-dimensional stochastic simulations of large-scale lithologic categories at the Yucca Mountain site. Each realization reproduces the available drill hole data used to condition the simulation. Information is propagated away from each point of observation in accordance with a mathematical model of spatial continuity inferred through soft data taken from published geologic cross sections. Variations among the simulated models collectively represent uncertainty in the lithology at unsampled locations. These stochastic models succeed in capturing many major features of welded-nonwelded lithologic framework of Yucca Mountain. However, contacts between welded and nonwelded rock types for individual simulations appear more complex than suggested by field observation, and a number of probable numerical artifacts exist in these models. Many of the apparent discrepancies between the simulated models and the general geology of Yucca Mountain represent characterization uncertainty, and can be traced to the sparse site data used to condition the simulations. Several vertical stratigraphic columns have been extracted from the three-dimensional stochastic models for use in simplified total-system performance assessment exercises. Simple, manual adjustments are required to eliminate the more obvious simulation artifacts and to impose a secondary set of deterministic geologic features on the overall stratigraphic framework provided by the indictor models

Lithological mapping of Kanjamalai hill using hyperspectral remote sensing tools in Salem district, Tamil Nadu, India

Science.gov (United States)

Arulbalaji, Palanisamy; Balasubramanian, Gurugnanam

2017-07-01

This study uses advanced spaceborne thermal emission and reflection radiometer (ASTER) hyperspectral remote sensing techniques to discriminate rock types composing Kanjamalai hill located in the Salem district of Tamil Nadu, India. Kanjamalai hill is of particular interest because it contains economically viable iron ore deposits. ASTER hyperspectral data were subjected to principal component analysis (PCA), independent component analysis (ICA), and minimum noise fraction (MNF) to improve identification of lithologies remotely and to compare these digital data results with published geologic maps. Hyperspectral remote sensing analysis indicates that PCA (R∶G∶B=2∶1∶3), MNF (R∶G∶B=3∶2∶1), and ICA (R∶G∶B=1∶3∶2) provide the best band combination for effective discrimination of lithological rock types composing Kanjamalai hill. The remote sensing-derived lithological map compares favorably with a published geological map from Geological Survey of India and has been verified with ground truth field investigations. Therefore, ASTER data-based lithological mapping provides fast, cost-effective, and accurate geologic data useful for lithological discrimination and identification of ore deposits.

The influence of spatial variability of lithological and morphometric characters on drainage network arrangement

Science.gov (United States)

Coco, Laura; Buccolini, Marcello

2015-04-01

Several factors control the spatial setting and temporal development of the drainage systems: climate, sea level changes, lithology, tectonics, morphometry, land use and land cover. The present work deals with the role of spatial variability of lithology and morphometry on drainage networks arrangement and presents some preliminary evaluations. The test area was the Periadriatic belt of central Italy, composed of Plio-Pleistocene foredeep succession (clay, sands and conglomerate) arranged in a northeastern vergence monocline. We analyzed 37 small basins directly flowing in the Adriatic Sea (18 in Abruzzi and 19 in Marche Region) that have homogenous climatic, eustatic, tectonic, land use and land cover features. For this reason, we could focus our research on lithology and morphometry. We used 10 m cell-size Italian DEM (TINITALY) supplying by INGV (National Institute of Geophysics and Volcanology) [from http://tinitaly.pi.ingv.it/] as source of morphometric data, and extracted watersheds and stream networks through an automatic procedure included in TauDEM toolbox within ArcGIS 9.3 [freely downloaded from http://hydrology.usu.edu/taudem/taudem5/index.html]. For each drainage basin, we reconstructed the topography prior to the inception of fluvial incision through the Topo-to-Raster interpolation tool, considering the heights of the watershed divide as elevation points and obtaining the pre-incision DEM in which the fluvial valleys resulted filled. On this DEM, we calculated the Morphometric Slope Index (MSI), developed by Buccolini et al. (2012), using the formula M SI = Rc -L -Ar/A2D in which Rc is circularity ratio, L is slope length, A2D and Ar are plane and surface area, respectively. In particular, Ar represents the three-dimensional area calculated on the pre-incision DEM. This index is a unique reference index for basin morphometry including both areal and linear features, such as size, shape, inclination, length and width. As drainage network parameter we

Influence of lithological characters of coal bearing formation on stability of roof of coal seams

Energy Technology Data Exchange (ETDEWEB)

Meng Zhao-ping; Peng Su-ping; Li Guo-qing; Huang Wei; Lu Jun; Lei Zhi-yong [CUMT, Beijing (China). School of Resources and Safety Engineering

2003-07-01

Lithology is one of the important factors influencing the stability of roof of coal seams. In order to investigate this, the phenomenon of underground pressure and distribution of pressure were studied by using the local observation and simulation test with similar materials. The observation results show that the distance of initial weighting and periodic weighting of the mudstone roof is shorter than that of sandstone roofs. The sandstone roof with a high strength has a longer distance of initial weighting and periodic weighting, the abutment stress on the working face is big and the height of caving and fracture zone is high. The peak point of abutment stress in the sandstone roof is near to the working face and the pressure bump is inclined to occur. The result is contrary to that in case of the mudstone roof with a low strength. While in the transition zone of nipped sandstone, roof rock-mass is broken and is poor in stability, therefore, it is difficult to hold the roof.

Gamma-gamma density and lithology tools simulation based on GEANT4 advanced low energy Compton scattering (GALECS) package

International Nuclear Information System (INIS)

Esmaeili-sani, Vahid; Moussavi-zarandi, Ali; Boghrati, Behzad; Afarideh, Hossein

2012-01-01

Geophysical bore-hole data represent the physical properties of rocks, such as density and formation lithology, as a function of depth in a well. Properties of rocks are obtained from gamma ray transport logs. Transport of gamma rays, from a 137 Cs point gamma source situated in a bore-hole tool, through rock media to detectors, has been simulated using a GEANT4 radiation transport code. The advanced Compton scattering concepts were used to gain better analyses about well formation. The simulation and understanding of advanced Compton scattering highly depends on how accurately the effects of Doppler broadening and Rayleigh scattering are taken into account. A Monte Carlo package that simulates the gamma-gamma well logging tools based on GEANT4 advanced low energy Compton scattering (GALECS).

The Relationship Between Lithology and Slope Morphology in the Tucson Mountains, Arizona.

Directory of Open Access Journals (Sweden)

Kamel Khanchoul

2008-05-01

Full Text Available The relationship between lithology and slope morphology is investigated at eight sites on granitic, andesitic, andsedimentary hillslopes in the Tucson Mountains, Arizona. Several methods are used in the study. Topographic profi lesare constructed. Skewness indices, slope length, and mean slope angles of the different slope profi les are computed andcompared with each other. Debris size analysis has permitted for some profi les, the determination of hillfront/piedmontjunctions. The nature and structural characteristics of the bedrock are the ones that determine the hillslope morphologyin this semi-arid region. There are, as a matter of fact, variations in profi les on the same bedrock nature but differentlyexposed. More precise morphologic studies have been also done in comparing the different lithologic pairs. They havepermitted to show some similarities in shapes. The granitic-andesitic slopes and andesiic-sedimentary slopes are thebest comparisons which show the relationship between lithology and slope morphology. The granitic-sedimentary sloperelationship is shown in the hillfront concavities, mountain front and piedmont mean slope angles.

Influence of Aggregate Wettability with Different Lithology Aggregates on Concrete Drying Shrinkage

Directory of Open Access Journals (Sweden)

Yuanchen Guo

2015-01-01

Full Text Available The correlation of the wettability of different lithology aggregates and the drying shrinkage of concrete materials is studied, and some influential factors such as wettability and wetting angle are analyzed. A mercury porosimeter is used to measure the porosities of different lithology aggregates accurately, and the pore size ranges that significantly affect the drying shrinkage of different lithology aggregate concretes are confirmed. The pore distribution curve of the different coarse aggregates is also measured through a statistical method, and the contact angle of different coarse aggregates and concrete is calculated according to the linear fitting relationship. Research shows that concrete strength is determined by aggregate strength. Aggregate wettability is not directly correlated with concrete strength, but wettability significantly affects concrete drying shrinkage. In all types’ pores, the greatest impacts on wettability are capillary pores and gel pores, especially for the pores of the size locating 2.5–50 nm and 50–100 nm two ranges.

Lithological controls on gas hydrate saturation: Insights from signal classification of NMR downhole data

Science.gov (United States)

Bauer, Klaus; Kulenkampff, Johannes; Henninges, Jan; Spangenberg, Erik

2016-04-01

Nuclear magnetic resonance (NMR) downhole data are analyzed with a new strategy to study gas hydrate-bearing sediments in the Mackenzie Delta (NW Canada). NMR logging is a powerful tool to study geological reservoir formations. The measurements are based on interactions between the magnetic moments of protons in geological formation water and an external magnetic field. Inversion of the measured raw data provides so-called transverse relaxation time (T2) distribution curves or spectra. Different parts of the T2 curve are related with distinct pore radii and corresponding fluid components. A common practice in the analysis of T2 distribution curves is to extract single-valued parameters such as apparent total porosity. Moreover, the derived total NMR apparent porosity and the gamma-gamma density log apparent porosity can be combined to estimate gas hydrate saturation in hydrate-bearing sediments. To avoid potential loss of information, in our new approach we analyze the entire T2 distribution curves as quasi-continuous signals to characterize the rock formation. The approach is applied to NMR data measured in gas hydrate research well Mallik 5L-38. We use self-organizing maps, a neural network clustering technique, to subdivide the data set of NMR T2 distribution curves into classes with a similar and distinctive signal shape. The method includes (1) preparation of data vectors, (2) unsupervised learning, (3) cluster definition, and (4) classification and depth mapping of all NMR signals. Each signal class thus represents a specific pore size distribution which can be interpreted in terms of distinct lithologies and reservoir types. A key step in the interpretation strategy is to reconcile the NMR classes with other log data not considered in the clustering analysis, such as gamma ray, photo-electric factor, hydrate saturation, and other logs. Our results defined six main lithologies within the target zone. Gas hydrate layers were recognized by their low signal

Application of element logging to lithologic identification of key horizons in Sichuan–Chongqing gas provinces

Directory of Open Access Journals (Sweden)

Ping Yin

2018-03-01

Full Text Available With the popularization and application of fast drilling technology in Sichuan–Chongqing gas provinces, the returned cuttings are fine and even powdered, so the traditional cutting lithology identification methods are not applicable any longer. In this paper, qualitative lithology identification and quantitative interpretation based on element logging were conducted on the key oil and gas bearing layers in this area according to the principle of elemental geochemistry. The study results show that: (1 different lithologies can be identified easily because of their different element logging characteristics. For example, basalts have the element characteristics of 0.35 0.55. (2 Clastic rocks, carbonate rocks, sulphate and transition rocks in the category of sedimentary rocks can be identified based on the element combination of (Al + Si + Fe and (Ca + Mg + S. Among them, clastic rocks have (Al + Si + Fe >31%, carbonate rocks have (Al + Si + Fe 36%. (3 Then, based on the element combination of (Si + K + Ca+Si/Al and (Al + Si + Fe + K+(Ca + S/Mg, sandstone, mudstone (shale, gypsum, dolomite, limestone and transition rocks can be identified. Finally, a qualitative identification chart and a set of quantitative interpretation software of element logging on key horizons in Sichuan–Chongqing gas provinces were developed to make this method convenient for field application. This method was applied on site in ten wells (such as Well MX207 in Sichuan–Chongqing gas provinces. It is indicated that the coincidence rate of lithology identification is in the range of 88.75–95.22% (averaging 92.42%. Obviously, it can satisfy the requirements of fast lithology identification while drilling of key oil and gas horizons in Sichuan–Chongqing gas provinces. Keywords: Sichuan–Chongqing gas provinces, Key horizon, Element logging, Lithologic identification while drilling, Quantitative lithologic interpretation, Qualitative

Determinación de la rugosidad superficial y anchos de inundación en la planicie del río Salado (Santa Fe) para la crecida de 2003

OpenAIRE

Imhoff, Matías; Trento, Alfredo

2012-01-01

Las planicies de inundación en ríos de llanura cumplen un papel fundamental en las crecidas, puesto que almacenan y conducen una parte importante del caudal, de lo cual se deriva la importancia de la correcta representación de la rugosidad superficial en las modelaciones hidrodinámicas. La zona de estudio corresponde al tramo del río Salado (Santa Fe, Argentina) comprendido entre la confluencia con el Arroyo Cululú y la ruta provincial N° 70. El objetivo fue determinar la rugosidad superficia...

Interrelationship of density and lithological characteristics of intersaline deposits of the Pripyatskiy basin

Energy Technology Data Exchange (ETDEWEB)

Anpilogov, A.P.; Bulyga, V.Kh.; Ksenofontov, V.A.; Ur' yev, I.I.

1980-01-01

Based on materials of lithological study and zoning of the lower Zadonskiy, upper Zadonskiy and Yeletskiy deposits of the Pripyatskiy basin with regard for the depth of occurrence of the rocks, a map was compiled for isodensities of the intersaline complex. Variability in the values of density over the area and the total correspondence of the configuration of isodens to the extent of the lithological fields and the main geostructural elements are established.

Slope position and Soil Lithological Effects on Live Leaf Nitrogen Concentration.

Science.gov (United States)

Szink, I.; Adams, T. S.; Orr, A. S.; Eissenstat, D. M.

2017-12-01

Soil lithology has been shown to have an effect on plant physiology from the roots to the leaves. Soils at ridgetop positions are typically more shallow and drier than soils at valley floor positions. Additionally, sandy soils tend to have a much lower water holding capacity and can be much harder for plants to draw nutrients from. We hypothesized that leaves from trees in shale derived soil at ridgetop positions will have lower nitrogen concentration than those in valley floor positions, and that this difference will be more pronounced in sandstone derived soils. This is due to the movement of nitrogen through the soil in a catchment, and the holding and exchange capacities of shale and sandstone lithologies. To test this, we collected live leaves using shotgun sampling from two locations in Central Pennsylvania from the Susquehanna Shale Hills Critical Zone Observatory (SSHCZO); one location where soils are underlain by the Rose Hill Shale, and one from where soils are underlain by the Tuscarora Sandstone formation. We then measured, dried, and massed in order to determine specific leaf area (SLA). Afterwards, we powderized the leaves to determined their C:N ratio using a CE Instruments EA 1110 CHNS-O elemental Analyzer based on the "Dumas Method". We found that live leaves of the same species at higher elevations had lower nitrogen concentrations than those at lower elevations, which is consistent with our hypothesis. However, the comparison of leaves from all species in the catchment is not as strong, suggesting that there is a species specific effect on nitrogen concentration within leaves. We are currently processing additional leaves from other shale and sandstone sites. These results highlight the effect of abiotic environments on leaf nutrient concentrations, and the connection between belowground and aboveground tree physiology.

Basic Data Report for Drillhole SNL-9 (C-2950)

International Nuclear Information System (INIS)

Powers, Dennis W.

2005-01-01

SNL-9 (permitted by the State Engineer as C-2950) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation within a proposed re-entrant of the margin of halite dissolved from the upper part of the Salado near Livingston Ridge. SNL-9 is located in the southeast quarter of section 23, T22S, R30E, in eastern Eddy County, New Mexico. SNL-9 was drilled to a total depth of 845 ft below the ground surface. Below surface dune sand and the Berino soil, SNL-9 encountered, in order, the Mescalero caliche, Gatuna, Dewey Lake, Rustler, and uppermost Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Medanos Members and into the uppermost Salado Formation. Geophysical logs were acquired from the open hole to total depth, and the drillhole was successfully completed with a screened interval open across the Culebra.

Basic Data Report for Drillhole SNL-9 (C-2950)

Energy Technology Data Exchange (ETDEWEB)

Dennis W. Powers; Washington Regulatory and Environmental Services

2005-01-19

SNL-9 (permitted by the State Engineer as C-2950) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation within a proposed re-entrant of the margin of halite dissolved from the upper part of the Salado near Livingston Ridge. SNL-9 is located in the southeast quarter of section 23, T22S, R30E, in eastern Eddy County, New Mexico. SNL-9 was drilled to a total depth of 845 ft below the ground surface. Below surface dune sand and the Berino soil, SNL-9 encountered, in order, the Mescalero caliche, Gatuna, Dewey Lake, Rustler, and uppermost Salado Formations. Two intervals were cored: 1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and 2) from the lower Tamarisk Member through the Culebra Dolomite and Los Meda?os Members and into the uppermost Salado Formation. Geophysical logs were acquired from the open hole to total depth, and the drillhole was successfully completed with a screened interval open across the Culebra.

Gamma-gamma density and lithology tools simulation based on GEANT4 advanced low energy Compton scattering (GALECS) package

Energy Technology Data Exchange (ETDEWEB)

Esmaeili-sani, Vahid, E-mail: vaheed_esmaeely80@yahoo.com [Department of Nuclear Engineering and Physics, Amirkabir University of Technology, P.O. Box 4155-4494, Tehran (Iran, Islamic Republic of); Moussavi-zarandi, Ali; Boghrati, Behzad; Afarideh, Hossein [Department of Nuclear Engineering and Physics, Amirkabir University of Technology, P.O. Box 4155-4494, Tehran (Iran, Islamic Republic of)

2012-02-01

Geophysical bore-hole data represent the physical properties of rocks, such as density and formation lithology, as a function of depth in a well. Properties of rocks are obtained from gamma ray transport logs. Transport of gamma rays, from a {sup 137}Cs point gamma source situated in a bore-hole tool, through rock media to detectors, has been simulated using a GEANT4 radiation transport code. The advanced Compton scattering concepts were used to gain better analyses about well formation. The simulation and understanding of advanced Compton scattering highly depends on how accurately the effects of Doppler broadening and Rayleigh scattering are taken into account. A Monte Carlo package that simulates the gamma-gamma well logging tools based on GEANT4 advanced low energy Compton scattering (GALECS).

Basic data report for Drillhole WIPP 28 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1979-08-01

WIPP 28 was drilled in Nash Draw (NE 1/4, sec. 18, T.21S., R.31E.) in Eddy County, New Mexico, to determine subsurface stratigraphy and examine dissolution features above undisturbed salt in the Salado Formation. Determination of dissolution rates will refine previous estimates and provide short-term (geologically) rates for WIPP risk assessments. The borehole encountered, from top to bottom, Mescalero caliche (12 ft with fill material for pad), Dewey Lake Red Beds (203 ft), Rustler Formation (316 ft), and the upper 270 ft of the Salado Formation. A dissolution residue, 58 ft thick, is at the top of the Salado Formation overlying halite-rich beds. In addition to obtaining nearly continuous core from the surface to total depth (801 ft), geophysical logs were taken to measure acoustic velocities, density, radioactivity, and formation resistivity. An interpretive report on dissolution in Nash Draw will be based on combined borehole basin data, surface mapping, and laboratory analyses of Nash Draw rocks and fluids. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes and to then be converted to a repository. The WIPP will also provide research facilities for interactions between high-level waste and salt

Basic data report for drillhole WIPP 25 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1979-09-01

WIPP 25 was drilled on the eastern edge of Nash Draw (SW 1/4, Sec. 15, T22S, R30E) in Eddy County, New Mexico, to determine subsurface stratigraphy and examine dissolution features above undisturbed salt in the Salado Formation. Determination of dissolution rates will refine previous estimates and provide short-term (geologically) rates for WIPP risk assessments. The borehole encountered, from top to bottom, Pleistocene sediments (17 ft with fill material for pad), Dewey Lake Red Beds (215 ft, Rustler Formation (333 ft, and 90 ft of the upper Salado Formation. A dissolution residue, 37 ft thick, is at the top of the Salado Formation overlying halite-rich beds. In addition to obtaining nearly continuous core from the surface to total depth (655 ft, geophysical logs were taken to measure acoustic velocities, density, radioactivity, and formation resistivity. An interpretive report on dissolution in Nash Draw will be based on combined borehole basin data, surface mapping, and laboratory analyses of Nash Draw rocks and fluids. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes and to then be converted to a repository. The WIPP will also provide research facilities for interactions between high-level waste and salt

Hydraulic-test interpretations for Well DOE-2 at the Waste Isolation Pilot Plant (WIPP) site

International Nuclear Information System (INIS)

Beauheim, R.L.

1986-11-01

Eleven different zones were tested in Well DOE-2 in five phases of testing between 1984 and 1986. Testing techniques included a constant-head, borehole-infiltration test, drill-stem tests, slug tests, pressure-pulse tests, and multiwell pumping tests. Four of the zones tested - the lower Dewey Lake Red Beds, the Tamarisk Member of the Rustler Formation, the lower unnamed member of the Rustler Formation and Rustler/Salado contact, and the entire Salado Formation - had permeabilities too low to measure with the equipment and test techniques used. The other zones had permeabilities ranging over six orders of magnitude. No saturated strata were encountered above the Rustler Formation, although parts of the middle Dewey Lake Red Beds appear to have appreciable permeability

WIPP air-intake shaft disturbed-rock zone study

International Nuclear Information System (INIS)

Dale, T.; Hurtado, L.D.

1996-01-01

The disturbed-rock zone surrounding the air-intake shaft at the Waste Isolation Pilot Plant (WIPP) site was investigated to determine the extent and the permeability of the disturbed-rock zone as a function of radial distance from the 6.1 m diameter shaft, at different elevations within the Salado. Gas- and brine-permeability tests were performed in the bedded halite of the Salado formation at two levels within the air-intake shaft. The gas- and brine-permeability test results demonstrated that the radial distance to an undisturbed formation permeability of 1 x 10 -21 m 2 was less than 3.0 m

Use of lithological model for substantiating the outlook for gas content of red plate deposits (Saksoniy) of Poland

Energy Technology Data Exchange (ETDEWEB)

Ancupow, P W; Bakun, M M; Bojarska, J; Glowacki, E; Korab, Z; Sniegiriewa, O W

1981-01-01

The enterprise ''Geonafta'' (Warsaw) jointly with the VNIGNI (Moscow) has made detailed lithological-facial studies of the section of the red plate of the Polish lowland. A detailed lithological-stratigraphic plan has been developed with isolation of complexes, A, B, C, D, E/sub 1/ and E/sub 2/ based on the average quantity of mineral composition. Based on the plan, detailed correlation comparisons were made of the sections of the Saksaonskiy stage (upper part of the red plate). In the Polish part of the Permian basin, three main zones are isolated for dispersal of lithofacial complexes: A (southern zone), B (central and C (northern). For each zone typical lithofacial models are constructed which include five complexes (elements A, B, C, D, E) which characterize different of the Permian paleoriver (paleo-Olova). In addition to lithology, the elements are distinguished by the specific nature of formation of the gas traps. Facial analysis of the deposits associated with the paleo-Olava make it possible to predict the development of other river paleosystems in the southern part of the deposits of the Saksoniya of zones A, B, and C confirms the opinion of two stages of development of the Saksaonskiy basin which were distinguished according to conditions of sedimentation. A link has been established between the gas structural traps in the zone of premountain debris cones and zones of development of paleo-watersheds. This link which is specific for the Permian basin of Poland must be taken into consideration in determining the trends for further prospecting. New potential sites of gas prospecting in the Saksaonskiy deposits are associated in particular with the promising nature of the paleoelevation slopes.

Lithostratigraphy does not always equal lithology: lessons learned in communicating uncertainty from stochastic modelling glacial and post glacial deposits in Glasgow U.K.

Science.gov (United States)

Kearsey, Tim; Williams, John; Finlayson, Andrew; Williamson, Paul; Dobbs, Marcus; Kingdon, Andrew; Campbell, Diarmad

2014-05-01

Geological maps and 3D models usually depict lithostragraphic units which can comprise of many different types of sediment (lithologies). The lithostratigraphic units shown on maps and 3D models of glacial and post glacial deposits in Glasgow are substantially defined by the method of the formation and age of the unit rather than its lithological composition. Therefore, a simple assumption that the dominant lithology is the most common constituent of any stratigraphic unit is erroneous and is only 58% predictive of the actual sediment types seen in a borehole. This is problematic for non-geologist such as planners, regulators and engineers attempting to use these models to inform their decisions and can lead to such users viewing maps and models as of limited use in such decision making. We explore the extent to which stochastic modelling can help to make geological models more predictive of lithology in heterolithic units. Stochastic modelling techniques are commonly used to model facies variations in oil field models. The techniques have been applied to an area containing >4000 coded boreholes to investigate the glacial and fluvial deposits in the centre of the city of Glasgow. We test the predictions from this method by deleting percentages of the control data and re-running the simulations to determine how predictability varies with data density. We also explore the best way of displaying such stochastic models to and suggest that displaying the data as probability maps rather than a single definitive answer better illustrates the uncertainties inherent in the input data. Finally we address whether is it possible truly to be able to predict lithology in such geological facies. The innovative Accessing Subsurface Knowledge (ASK) network was recently established in the Glasgow are by the British Geological Survey and Glasgow City Council to deliver and exchange subsurface data and knowledge. This provides an idea opportunity to communicate and test a range of

40Ar/ 39Ar dating of Late Permian evaporites, southeastern New Mexico, USA

Science.gov (United States)

Renne, Paul R.; Sharp, Warren D.; Montañez, Isabel P.; Becker, Tim A.; Zierenberg, Robert A.

2001-12-01

40Ar/ 39Ar dating of the potassium-magnesium sulfate mineral langbeinite from Permian evaporites of the Salado formation near Carlsbad, New Mexico, provides quantitative evidence that some salts in these deposits have not recrystallized for 251 Myr since deposition. Survival of Permian salts supports the possibility that Bacillus bacteria recovered from nearby halite was isolated in a closed system and represents a sample of uncontaminated Permian life. Local recrystallization of langbeinite and other nearby minerals is also indicated by the dating, suggesting both the need and the opportunity to document closed system behavior more rigorously. The shoaling and desiccation event recorded by the Salado formation began at least 1 Myr before the Permian-Triassic boundary. Temporal correlation of the Salado with the Zechstein evaporites of north-central Europe supports previously inferred regression models for the origin of these deposits. Significant paleoenvironmental change at the Permian-Triassic boundary thus occurred on a time scale more protracted than that implied by geologically instantaneous events such as bolide impacts.

Geological factors of deposit formation

International Nuclear Information System (INIS)

Grushevoj, G.V.

1980-01-01

Geologic factors of hydrogenic uranium deposit formation are considered. Structural, formation and lithological-facies factors of deposit formation, connected with zones of stratal oxidation, are characterized. Peculiarities of deposit localization, connected with orogenic structures of Mesozoic and lenozoic age, are described. It is noted that deposits of anagenous group are widely spread in Paleozoic formations, infiltration uranium deposits are localized mainly in Cenozoic sediments, while uranium mineralization both anagenous and infiltration groups are widely developed in Mesozoic sediments. Anagenous deposits were formed in non-oxygen situation, their age varies from 200 to 55 mln years. Infiltration deposit formation is determined by asymmetric oxidation zonation, their age varies from 10 - 40 mln years to dozens of thousand years [ru

Aquifer geometry, lithology, and water levels in the Anza–Terwilliger area—2013, Riverside and San Diego Counties, California

Science.gov (United States)

Landon, Matthew K.; Morita, Andrew Y.; Nawikas, Joseph M.; Christensen, Allen H.; Faunt, Claudia C.; Langenheim, Victoria E.

2015-11-24

The population of the Anza–Terwilliger area relies solely on groundwater pumped from the alluvial deposits and surrounding bedrock formations for water supply. The size, characteristics, and current conditions of the aquifer system in the Anza–Terwilliger area are poorly understood, however. In response to these concerns, the U.S. Geological Survey, in cooperation with the High Country Conservancy and Rancho California Water District, undertook a study to (1) improve mapping of groundwater basin geometry and lithology and (2) to resume groundwater-level monitoring last done during 2004–07 in the Anza–Terwilliger area. 

Lithologic features and Uranium possibilities of the granites of ...

African Journals Online (AJOL)

Preliminary lithologic and uranium investigation conducted in Pupule and environs to investigate further the area of uranium mineralisation in the neighbouring district revealed that the area is not attractive for further uranium search. Geologic field mapping shows that the area like most other parts of the region is underlain ...

Lithological Classification Using Sentinel-2A Data in the Shibanjing Ophiolite Complex in Inner Mongolia, China

Directory of Open Access Journals (Sweden)

Wenyan Ge

2018-04-01

Full Text Available As a source of data continuity between Landsat and SPOT, Sentinel-2 is an Earth observation mission developed by the European Space Agency (ESA, which acquires 13 bands in the visible and near-infrared (VNIR to shortwave infrared (SWIR range. In this study, a Sentinel-2A imager was utilized to assess its ability to perform lithological classification in the Shibanjing ophiolite complex in Inner Mongolia, China. Five conventional machine learning methods, including artificial neural network (ANN, k-nearest neighbor (k-NN, maximum likelihood classification (MLC, random forest classifier (RFC, and support vector machine (SVM, were compared in order to find an optimal classifier for lithological mapping. The experiment revealed that the MLC method offered the highest overall accuracy. After that, Sentinel-2A image was compared with common multispectral data ASTER and Landsat-8 OLI (operational land imager for lithological mapping using the MLC method. The comparison results showed that the Sentinel-2A imagery yielded a classification accuracy of 74.5%, which was 2.5% and 5.08% higher than those of the ASTER and OLI imagery, respectively, indicating that Sentinel-2A imagery is adequate for lithological discrimination, due to its high spectral resolution in the VNIR to SWIR range. Moreover, different data combinations of Sentinel-2A + ASTER + DEM (digital elevation model and OLI + ASTER + DEM data were tested on lithological mapping using the MLC method. The best mapping result was obtained from Sentinel-2A + ASTER + DEM dataset, demonstrating that OLI can be replaced by Sentinel-2A, which, when combined with ASTER, can achieve sufficient bandpasses for lithological classification.

"Un nuevo puerto para Buenos Aires". La boca del río Salado como alternativa a los bloqueos portuarios en el Río de la Plata (1830-1850

Directory of Open Access Journals (Sweden)

Antonio Galarza

2014-05-01

Full Text Available This article presents an analysis of the commerce that took place at the mouth of the Salado River, which was born from the war with the Brazilian Empire (1825-1828 in an alternate port to the one in the provincial capital of Buenos Aires. By delving into sources that have not been explored much by investigations on this subject, we study the various economic activities that took place in this new port—transportation, freight, import, and export— between 1830 and late 1850. Simultaneously, we examine the problems that the need for control over these activities generated for the authorities.

Mapping Post-Fire Vegetation Recovery at Different Lithologies of Taygetos mt (greece) with Multi-Temporal Remote Sensing Data

Science.gov (United States)

Vassilakis, Emmanuel; Mallinis, George; Christopoulou, Anastasia; Farangitakis, Georgios-Pavlos; Papanikolaou, Ioannis; Arianoutsou, Margarita

2017-04-01

Mt Taygetos (2407m), located at southern Peloponnese (Greece) suffered a large fire during the summer of 2007. The fire burned approximately 45% of the area covered by the endemic Greek fir (Abies cephalonica) and Black Pine (Pinus nigra) forest ecosystems. The aim of the current study is to examine the potential differences on post-fire vegetation recovery imposed by the lithology as well as the geomorphology of the given area over sites of the same climatic and landscape conditions (elevation, aspect, slope etc.). The main lithologies consist of carbonate, permeable, not easily erodible formations (limestones and marbles) and clastic, impermeable (schists, slate and flysch) erodible ones. A time-series of high spatial resolution satellite images were interpreted, analyzed and compared in order to detect changes in vegetation coverage which could prioritize areas of interest for fieldwork campaigns. The remote sensing datasets were acquired before (Ikonos-2), a few months after (Quickbird-2) and some years after (Worldview-3) the 2007 fire. High resolution Digital Elevation Model was used for the ortho-rectification and co-registration of the remote sensing data, but also for the extraction of the mountainous landscape characteristics. The multi-temporal image dataset was analyzed through GEographic-Object Based Image Analysis (GEOBIA). Objects corresponding to different vegetation types through time were identified through spectral and textural features. The classification results were combined with basic layers such as lithological outcrops, pre-fire vegetation, landscape morphology etc., supplementing a spatial geodatabase used for classifying burnt areas with varying post-fire plant community recovery. We validated the results of the classification during fieldwork and found that at a local scale, where the landscape features are quite similar, the bedrock type proves to be an important factor for vegetation recovery, as it clearly defines the soil generation

Lithological and Mineralogical Characteristics and Forming Conditions of the Jurassic Sediments on the West Siberian Basin

Directory of Open Access Journals (Sweden)

R.R. Khaziev

2017-11-01

Full Text Available In the present work, lithological and mineralogical features, granulometric composition, as well as reservoir properties of the formation YuV1-1 of the Ety-Purovsky oil field are considered. It is established that the main rock-forming minerals of the reservoir – quartz, potassium feldspar and mica, also fragments of rocks, including carbonate rocks, are also found. Sandstone is diagnosed as carbonate greywack by the examined thin sections. According to the granulometry data, the formation is characterized as fine-grained sandstone with a dominant fraction of grains of 0.1-0.25 mm (47% of the total mass. According to the petrogenetic Passega diagram it was established that the formation was formed under the conditions of the gradation suspension generated in the lower parts of the fast river streams, directly at the bottom, which agrees with the literature data. Moreover, according to design factors (So, Q3, Q1, it is established that the formation is characterized by a poor degree of sorting of the sand material, as well as low roundness of grains and deteriorated reservoir properties, measured in laboratory conditions. It follows from the analysis that the reservoir is characterized by low productivity, and its development requires the use of hydraulic fracturing at an early stage of development.

Hydraulic testing around Room Q: Evaluation of the effects of mining on the hydraulic properties of Salado Evaporites

Energy Technology Data Exchange (ETDEWEB)

Domski, P.S.; Upton, D.T. [INTERA, Inc., Albuquerque, NM (United States); Beauheim, R.L. [Sandia National Laboratories, Albuquerque, NM (United States)

1996-03-01

Room Q is a 109-m-long cylindrical excavation in the Salado Formation at the Waste Isolation Pilot Plant (WIPP) site. Fifteen boreholes were drilled and instrumented around Room Q so that tests could be conducted to determine the effects of room excavation on the hydraulic properties of the surrounding evaporate rocks. Pressure-buildup and pressure-pulse tests were conducted in all of the boreholes before Room Q was mined. The data sets from only eight of the boreholes are adequate for parameter estimation, and five of those are of poor quality. Constant-pressure flow tests and pressure-buildup tests were conducted after Room Q was mined, producing eleven interpretable data sets, including two of poor quality. Pre-mining transmissivities interpreted from the three good-quality data sets ranged from 1 x 10{sup -15} to 5 x 10{sup -14} m{sup 2}/s (permeability-thickness products of 2 x 10{sup -22} to 9 x 10{sup -21} m{sup 3}) for test intervals ranging in length from 0.85 to 1.37 m. Pre-mining average permeabilities, which can be considered representative of undisturbed, far-field conditions, were 6 x 10{sup -20} and 8 x 10{sup -20} m{sup 2} for anhydrite, and 3 x 10{sup -22} m{sup 2} for halite. Post-mining transmissivities interpreted from the good-quality data sets ranged from 1 x 10{sup -16} to 3 x 10{sup -13} m{sup 2}/s (permeability-thickness products of 2 x 10{sup -23} to 5 x 10{sup -20} m{sup 3}). Post-mining average permeabilities for anhydrite ranged from 8 x 10{sup -20} to 1 x 10{sup -19} m{sup 2}. The changes in hydraulic properties and pore pressures that were observed can be attributed to one or a combination of three processes: stress reduction, changes in pore connectivity, and flow towards Room Q. The effects of the three processes cannot be individually quantified with the available data.

Hydraulic testing around Room Q: Evaluation of the effects of mining on the hydraulic properties of Salado Evaporites

International Nuclear Information System (INIS)

Domski, P.S.; Upton, D.T.; Beauheim, R.L.

1996-03-01

Room Q is a 109-m-long cylindrical excavation in the Salado Formation at the Waste Isolation Pilot Plant (WIPP) site. Fifteen boreholes were drilled and instrumented around Room Q so that tests could be conducted to determine the effects of room excavation on the hydraulic properties of the surrounding evaporate rocks. Pressure-buildup and pressure-pulse tests were conducted in all of the boreholes before Room Q was mined. The data sets from only eight of the boreholes are adequate for parameter estimation, and five of those are of poor quality. Constant-pressure flow tests and pressure-buildup tests were conducted after Room Q was mined, producing eleven interpretable data sets, including two of poor quality. Pre-mining transmissivities interpreted from the three good-quality data sets ranged from 1 x 10 -15 to 5 x 10 -14 m 2 /s (permeability-thickness products of 2 x 10 -22 to 9 x 10 -21 m 3 ) for test intervals ranging in length from 0.85 to 1.37 m. Pre-mining average permeabilities, which can be considered representative of undisturbed, far-field conditions, were 6 x 10 -20 and 8 x 10 -20 m 2 for anhydrite, and 3 x 10 -22 m 2 for halite. Post-mining transmissivities interpreted from the good-quality data sets ranged from 1 x 10 -16 to 3 x 10 -13 m 2 /s (permeability-thickness products of 2 x 10 -23 to 5 x 10 -20 m 3 ). Post-mining average permeabilities for anhydrite ranged from 8 x 10 -20 to 1 x 10 -19 m 2 . The changes in hydraulic properties and pore pressures that were observed can be attributed to one or a combination of three processes: stress reduction, changes in pore connectivity, and flow towards Room Q. The effects of the three processes cannot be individually quantified with the available data

Contribution to the knowledge of the Val le Chico Uruguay formation

International Nuclear Information System (INIS)

Pirelli, H.

1999-01-01

This research has been designed to contribute with Val le Chico Uruguay formation knowledge, taking into the alkaline type tectonic environment, geochronology, granitoid types, lithologies and mineralizations existing in the area

Analysis of hydraulic tests of the Culebra and Magenta Dolomites and Dewey Lake Redbeds conducted at the Waste Isolation Pilot Plant Site

International Nuclear Information System (INIS)

Beauheim, R.L.

1998-09-01

This report presents interpretations of hydraulic tests conducted at 15 well locations in the vicinity of the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico between 1980 and 1996. The WIPP is a US Department of Energy (DOE) facility to demonstrate safe disposal of transuranic wastes arising form the nation's defense programs. The WIPP repository lies within bedded halite of the Salado Formation, 2,155 ft below ground surface. The tests reported herein were, with two exceptions, conducted in the Culebra Dolomite member of the Rustler Formation, which overlies the Salado Formation. The remaining tests were conducted in the Magenta Member of the Rustler and in the overlying formation, the Dewey Lake Redbeds. This report completes the documentation of hydraulic-test interpretations used as input to the WIPP Compliance Certification Application (US DOE, 1996)

Lithological-morphological map of Italy: Instrument for environmental protection

International Nuclear Information System (INIS)

Noe', L.

1991-01-01

This paper describes the development by ENEA (Italian Commission for New Technologies, Energy and the Environment) of a map which identifies and coordinates the principal lithological and morphological features of Italy's environmental ecosystems. The map is intended especially for use in site characterization studies and environmental impacts assessments in construction projects involving hydroelectric power dams and geothermal power plants

A Comparison of Anorthositic Lunar Lithologies: Variation on the FAN Theme

Science.gov (United States)

Nyquist, L. E.; Shih, C-Y.; Yamaguchi, A.; Mittlefehldt, D. W.; Peng, Z. X.; Park, J.; Herzog, G. F.; Shirai, N.

2014-01-01

Certain anorthositic rocks that are rare in the returned lunar samples have been identified among lunar meteorites. The variety of anorthosites in the Apollo collection also is more varied than is widely recognized. James eta. identified three lithologies in a composite clast o ferroan anorthosite (FAN)-suite rocks in lunar breccia 64435. They further divided all FANs into four subgroups: anorthositic ferroan (AF), mafic magnesian (MM), mafic ferroan (MF), and anorthositic sodic (AS, absent in the 64435 clast). Here we report Sm-Nd isotopic studies of the lithologies present in the 64435 composite clast and compare the new data to our previous data for lunar anorthosites incuding lunar anorthositic meteorites. Mineralogy-petrography, in situ trace element studies, Sr-isotope studies, and Ar-Ar chronology are included, but only the Nd-isotopic studies are currently complete.

Nuevo y definitivo estudio técnico de balance hídrico integral cuenca alta del río Apurímac hasta la confluencia con el río salado: informe final

OpenAIRE

Programa de las Naciones Unidas para el Medio Ambiente; Oficina de Naciones Unidas de Servicios para Proyectos; Proyecto EBHICA

2013-01-01

Contiene el informe final del Estudio de Balance Hídrico Integral de la Cuenca Alta del Río Apurímac hasta la Confluencia con el Río Salado (EBHICA). Luego de una presentación, este el documento brinda las conclusiones y recomendaciones del estudio y seguidamente desarrolla 19 capítulos que tratan la descripción general de la cuenca, antecedentes, información cartográfica, características, análisis de datos, entre otros aspectos.

Distribución y concentración de Coliformes totales, Coliformes fecales, Escherichia coli Y Enterococos en el agua y sedimento en el estero salado (tramos B, D, E Y G)

OpenAIRE

Baños Cruz, Luís Guillermo

2012-01-01

Se realizaron dos muestreos en marea roja, uno en Diciembre del 2009 y el otro en Enero del 2010, para determinar los microorganismos en el Estero Salado como indicadores de contaminación. El análisis incluyó parámetros fisicoquímicos como pH, salinidad, temperatura y oxígeno disuelto, y además la medición de las bacterias coliformes totales, coliformes fecales, Escherichia coli y enterococos. Se obtuvieron altos niveles de contaminación bacteriana en el agua. La mayor contaminación está...

Investigating lithological and geophysical relationships with applications to geological uncertainty analysis using Multiple-Point Statistical methods

DEFF Research Database (Denmark)

Barfod, Adrian

The PhD thesis presents a new method for analyzing the relationship between resistivity and lithology, as well as a method for quantifying the hydrostratigraphic modeling uncertainty related to Multiple-Point Statistical (MPS) methods. Three-dimensional (3D) geological models are im...... is to improve analysis and research of the resistivity-lithology relationship and ensemble geological/hydrostratigraphic modeling. The groundwater mapping campaign in Denmark, beginning in the 1990’s, has resulted in the collection of large amounts of borehole and geophysical data. The data has been compiled...... in two publicly available databases, the JUPITER and GERDA databases, which contain borehole and geophysical data, respectively. The large amounts of available data provided a unique opportunity for studying the resistivity-lithology relationship. The method for analyzing the resistivity...

Lithological model of the South China crust based on integrated geophysical data

International Nuclear Information System (INIS)

Zhao, Bing; Bai, Zhiming; Xu, Tao; Zhang, Zhi; Badal, José

2013-01-01

The structure and petrology of the earth's crust is critical to understand the growth and evolution of the continents. In this paper, we present the crustal lithological model along the 400-km-long seismic profile between Lianxian, near Hunan Province, and Gangkou Island, near Guangzhou City, South China. This model is based on an integrated geophysical data set including P-wave velocity (V P ), S-wave velocity (V S ), V P /V S ratio, mass density (ρ) and Lamé impedances (ρλ, ρµ), which are compared to those determined by laboratory measurements on a variety of crustal rock samples. The Bouguer gravity anomaly together with the seismic velocity enables us to constrain density. The heat flow and thermal field allow us to carry out corrections for temperature. Pressure correction is based on depth. We directly compare the property parameters determined from the South China seismic data with laboratory measurements made at the same conditions of pressure and temperature. Inversion of the available data for rock lithology indicates that there are substantial differences in the crustal lithology of the Yangtze and Cathaysia blocks. While the average lithology of the upper crust in both blocks is mainly characterized by granite–granodiorite and biotite gneiss, the granite–granodiorite layer is much thicker beneath the Cathaysia block. The middle crust in these two domains is not entirely similar, being granite–granodiorite and granite gneiss as the best fit for the Yangtze block, and granite gneiss and biotite gneiss for the Cathaysia block. The lower crust is composed of biotite gneiss, paragranulite and amphibolite for the Yangtze block, whereas biotite gneiss, paragranulite, diorite, mica quartz schist, amphibolite, green schist facies basalt and hornblende provide the best fit for the Cathaysia block. The results demonstrate that to the east of the Chenzhou–Linwu fault (CLF) that is the southern segment of the Jiangshan–Shaoxing fault, the lithology

lithologic features and uranium possibilities of the granites of pupule

African Journals Online (AJOL)

Preliminary lithologic and uranium investigation conducted in Pupule and environs to investigate further the area of uranium mineralisation in the neighbouring district revealed that the area is not attractive for further uranium search. Geologic field mapping shows that the area like most other parts of the region is underlain ...

Analysis of hydraulic tests of the Culebra and Magenta Dolomites and Dewey Lake Redbeds conducted at the Waste Isolation Pilot Plant Site

Energy Technology Data Exchange (ETDEWEB)

Beauheim, R.L. [Sandia National Labs., Albuquerque, NM (United States). Geohydrology Dept.; Ruskauff, G.J. [Duke Engineering and Services, Inc., Albuquerque, NM (United States)

1998-09-01

This report presents interpretations of hydraulic tests conducted at 15 well locations in the vicinity of the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico between 1980 and 1996. The WIPP is a US Department of Energy (DOE) facility to demonstrate safe disposal of transuranic wastes arising form the nation`s defense programs. The WIPP repository lies within bedded halite of the Salado Formation, 2,155 ft below ground surface. The tests reported herein were, with two exceptions, conducted in the Culebra Dolomite member of the Rustler Formation, which overlies the Salado Formation. The remaining tests were conducted in the Magenta Member of the Rustler and in the overlying formation, the Dewey Lake Redbeds. This report completes the documentation of hydraulic-test interpretations used as input to the WIPP Compliance Certification Application (US DOE, 1996).

Pedological Heterogeneity of Soils Developed from Lithologies of the Pirambóia, Sanga-do-Cabral, and Guará Geological Formations in Southern Brazil

Directory of Open Access Journals (Sweden)

Pablo Grahl dos Santos

Full Text Available ABSTRACT The source material is one of the factors that most influence soil genesis and the mainly responsible for the nature, composition, and behavior of the soil. Given the geological complexity of the Santa Maria River basin, the objective of this study was to investigate whether the new lithologies described recently may be responsible for a greater variation in soil properties, as well as in the soil taxonomy itself. The study area is located in the municipality of Rosário do Sul, RS, Brazil at 30° 15’ 28” S and 54° 54’ 50” W, with average altitude of 132 m and climate type Cfa. This study was supported by a cartographic base composed of topographic charts, geological maps, satellite images, digital elevation models, and maps of geomorphometric variables, with the support of GPS receivers and GIS. Topolithosequences were defined from soils developed from the Pirambóia, Sanga-do-Cabral, and Guará Formations, and soil profiles were chosen based on types of source materials, variations in relief, and altitude. A classical model of slope compartmentalization was applied for correlation of the geomorphic surfaces with pedogenesis. Soil profiles were described in a general and morphological manner, and soil samples were collected for analysis. The physical and chemical properties determined were particle size, active and potential acidity, organic C content, Ca2+, Mg2+, K+, and Al3+. The sum of bases, CEC, flocculation activity and degree of flocculation of the clay fraction, and base (V, aluminum (m, and sodium saturation were calculated. Soil properties were evaluated through factor analysis and grouping, which allowed profiles to be grouped based on their variables and identification of which variables were preponderant in distinguishing them. Furthermore, multivariate analysis allowed statistical differentiation of the profiles in the same lithostratigraphic unit and in different relief positions, and also differentiation of

Experimental Investigations into the Effects of Lithology on Acoustic Emission

Directory of Open Access Journals (Sweden)

Baozhu Tian

2015-11-01

Full Text Available In order to study how lithology affects acoustic emissions (AE, a series of tunnel rock burst simulation experiments, monitored by acoustic emission instruments, were conducted on granite, marble and basalt. By analyzing the characteristic parameters, this study found that AE events occur more frequently during the rock burst process on granite and basalt. Marble remains dormant until 75% of the loading time before the peak, at which point, cracks develop rapidly and AE events dramatically increase. During the rock burst process, the AE energy release demonstrates that low energy is released in the incubation phase and robust energy is released during the later phase. Before the rock burst occurs, increased in the heterogeneity index Cv values of the AE event are subject to lithology. The Cv values of granite and basalt have an increase of about 0.2-0.4, while marble shows an increase of 1.0-1.2. The heterogeneity index Cv value of an AE event is in line with the rock burst process.

Towards automatic lithological classification from remote sensing data using support vector machines

Science.gov (United States)

Yu, Le; Porwal, Alok; Holden, Eun-Jung; Dentith, Michael

2010-05-01

Remote sensing data can be effectively used as a mean to build geological knowledge for poorly mapped terrains. Spectral remote sensing data from space- and air-borne sensors have been widely used to geological mapping, especially in areas of high outcrop density in arid regions. However, spectral remote sensing information by itself cannot be efficiently used for a comprehensive lithological classification of an area due to (1) diagnostic spectral response of a rock within an image pixel is conditioned by several factors including the atmospheric effects, spectral and spatial resolution of the image, sub-pixel level heterogeneity in chemical and mineralogical composition of the rock, presence of soil and vegetation cover; (2) only surface information and is therefore highly sensitive to the noise due to weathering, soil cover, and vegetation. Consequently, for efficient lithological classification, spectral remote sensing data needs to be supplemented with other remote sensing datasets that provide geomorphological and subsurface geological information, such as digital topographic model (DEM) and aeromagnetic data. Each of the datasets contain significant information about geology that, in conjunction, can potentially be used for automated lithological classification using supervised machine learning algorithms. In this study, support vector machine (SVM), which is a kernel-based supervised learning method, was applied to automated lithological classification of a study area in northwestern India using remote sensing data, namely, ASTER, DEM and aeromagnetic data. Several digital image processing techniques were used to produce derivative datasets that contained enhanced information relevant to lithological discrimination. A series of SVMs (trained using k-folder cross-validation with grid search) were tested using various combinations of input datasets selected from among 50 datasets including the original 14 ASTER bands and 36 derivative datasets (including 14

A coupled mechanical/hydrologic model for WIPP shaft seals

International Nuclear Information System (INIS)

Ehgartner, B.

1991-06-01

Effective sealing of the Waste Isolation Pilot Plant (WIPP) shafts will be required to isolate defense-generated transuranic wastes from the accessible environment. Shafts penetrate water-bearing hard rock formations before entering a massive creeping-salt formation (Salado) where the WIPP is located. Short and long-term seals are planned for the shafts. Short-term seals, a composite of concrete and bentonite, will primarily be located in the hard rock formations separating the water-bearing zones from the Salado Formation. These seals will limit water flow to the underlying long-term seals in the Salado. The long-term seals will consist of lengthly segments of initially unsaturated crushed salt. Creep closure of the shaft will consolidate unsaturated crushed salt, thereby reducing its permeability. However, water passing through the upper short-term seals and brine inherent to the salt host rock itself will eventually saturate the crushed salt and consolidation could be inhibited. Before saturating, portions of the crushed salt in the shafts are expected to consolidate to a permeability equivalent to the salt host rock, thereby effectively isolating the waste from the overlying water-bearing formations. A phenomenological model is developed for the coupled mechanical/hydrologic behavior of sealed WIPP shafts. The model couples creep closure of the shaft, crushed salt consolidation, and the associated reduction in permeability with Darcy's law for saturated fluid flow to predict the overall permeability of the shaft seal system with time. 17 refs., 6 figs., 1 tab

Sensitivity analysis of solute transport in fractures and determination of anisotropy within the Culebra dolomite

International Nuclear Information System (INIS)

Rehfeldt, K.

1984-09-01

The Waste Isolation Pilot Plant (WIPP) is a U.S. Department of Energy facility for demonstrating the disposal of defense transuranic (TRU) radioactive waste. The WIPP is located approximately 26 miles east of Carlsbad, New Mexico. It lies in the northern part of the Delaware Basin, an oval shaped sedimentary trough nearly surrounded by the Capitan reef. The basin is composed primarily of a thick sequence of evaporites with overlying clastic sedimentary rocks. The major formations of interest in the Delaware Basin at the WIPP site consist, in stratigraphially ascending order, the Castile, Salado, and Rustler Formations and the Dewey Lake Redbeds. The Castile Formation is the basal unit in the evaporite sequence and consists of thick layers of anhydrite and halite. The Castile has been termed anhydrite-rich and is differentiated on this basis from the overlying halite-rich Salado Formation. 23 refs., 11 figs., 7 tabs

Geostatistical analysis of the relationship between airborne electromagnetic data and borehole lithological data

DEFF Research Database (Denmark)

Barfod, Adrian; Møller, Ingelise; Christiansen, Anders Vest

2015-01-01

resistivity values, revealing different distribution functions for lithological categories. A very large and extensive dataset is available in Denmark through the national geophysical and borehole databases. These databases contain all geophysical and borehole data in Denmark and covers a large part of its......We present a large-scale study of the relationship between dense airborne SkyTEM resistivity data and sparse lithological borehole data. Airborne electromagnetic (AEM) data contains information about subsurface geology and hydrologic properties; however extracting this information is not trivial....... Today, geophysical data is used in combination with borehole data to create detailed geological models of the subsurface. The overall statistical relationship is, however, not widely known. The objective of this study is to develop a method for understanding the relationship between petrophysical...

Xenoliths from Bunyaruguru volcanic field: Some insights into lithology of East African Rift upper mantle

Science.gov (United States)

Muravyeva, N. S.; Senin, V. G.

2018-01-01

The mineral composition of mantle xenoliths from kamafugites of the Bunyaruguru volcanic field has been determined. The major and some trace elements (Si, Ti, Al, Fe, Mn, Mg, Ca, Na, K, Cr, Ni, Ba, Sr, La, Ce, Nd, Nb) has been analyzed in olivine, clinopyroxene, phlogopite, Cr-spinel, titanomagnetite, perovskite and carbonates of xenoliths and their host lavas. Bunyaruguru is one of three (Katwe-Kikorongo, Fort Portal and Bunyaruguru) volcanic fields included in the Toro-Ankole province located on the North end of the West Branch of the East African Rift. The xenoliths from three craters within the Bunyaruguru volcanic field revealed the different character of metasomatic alteration, reflecting the heterogeneity of the mantle on the kilometer scale. The most unusual finding was composite glimmerite-wehrlite xenolith from the crater Kazimiro, which contains the fresh primary high-Mg olivine with inclusions of Cr-spinel that had not been previously identified in this area. The different composition of phenocryst and xenolith minerals indicates that the studied xenoliths are not cumulus of enclosing magma, but the composition of xenoliths characterizes the lithology of the upper mantle of the area. The carbonate melt inclusions in olivine Fo90 demonstrate the existence of primary carbonatitic magmas in Bunyaruguru upper mantle. The results of texture and chemical investigation of the xenolith minerals indicate the time sequence of metasomatic alteration of Bunyaruguru upper mantle: MARID metasomatism at the first stage followed by carbonate metasomatism. The abundances of REE in perovskites from kamafugite are 2-4 times higher than similar values for xenolith. Therefore the kamafugite magma was been generated from a more enriched mantle source than the source of the xenoliths. The evaluation of P-T conditions formation of clinopyroxene xenolith revealed the range of pressure 20-65 kbar and the temperatures range 830-1040 °C. The pressure of clinopyroxene phenocryst

Las mujeres víctimas de El Salado: una reflexión ética del conflicto armado

Directory of Open Access Journals (Sweden)

María Camila Hernández Ceballos

2015-12-01

Full Text Available Este ensayo busca analizar, desde una perspectiva ética, los daños causados sobre las mujeres víctimas de violencia sexual en el contexto del conflicto armado, con énfasis especial en la situación vivida por las mujeres de El Salado y la violencia perpetrada por los paramilitares, que fue una de las más sanguinarias y sádicas. También pretende analizar, después de 15 años de esta masacre, cuáles han sido las dinámicas de resistencias que han realizado las mujeres víctimas, además de sus procesos de reconstrucción de memoria, a través de la teoría de la ética de la memoria. Además, de realizar una reflexión sobre los daños que ha causado el conflicto armado a la participación política de las mujeres y el fortalecimiento de la democracia. Finalmente, a través de las teorías de la ética de la responsabilidad y del compromiso, entender la responsabilidad del Estado frente a los hechos y la responsabilidad que, como mujer y ciudadana, debo asumir frente al conflicto y las injusticias estructurales contra las mujeres que en él se replican.

Geology of the Early Arikareean sharps formation on the Pine Ridge Indian Reservation and surrounding areas of South Dakota and Nebraska.

Science.gov (United States)

McConnell, Thomas H; Dibenedetto, Joseph N

2012-01-01

Based on geologic mapping, measured sections, and lithologic correlations, the local features of the upper and lower type areas of the Early Arikareean (30.8-20.6 million years ago) Sharps Formation are revised and correlated. The Sharps Formation above the basal Rockyford Member is divided into two members of distinct lithotypes. The upper 233 feet of massive siltstones and sandy siltstones is named the Gooseneck Road Member. The middle member, 161 feet of eolian volcaniclastic siltstones with fluvially reworked volcaniclastic lenses and sandy siltstone sheets, is named the Wolff Camp Member. An ashey zone at the base of the Sharps Formation is described and defined as the Rockyford Ash Zone (RAZ) in the same stratigraphic position as the Nonpareil Ash Zone (NPAZ) in Nebraska. Widespread marker beds of fresh water limestones at 130 feet above the base of the Sharps Formation and a widespread reddish-brown clayey siltstone at 165 feet above the base of the Sharps Formation are described. The Brown Siltstone Beds of Nebraska are shown to be a southern correlative of the Wolff Camp Member and the Rockyford Member of the Sharps Formation. Early attempts to correlate strata in the Great Plains were slow in developing. Recognition of the implications of the paleomagnetic and lithologic correlations of this paper will provide an added datum assisting researchers in future biostratigraphic studies. Based on similar lithologies, the Sharps Formation, currently assigned to the Arikaree Group, should be reassigned to the White River Group.

Geologic and well-construction data for the H-9 borehole complex near the proposed Waste Isolation Pilot Plant site, southeastern New Mexico

Science.gov (United States)

Drellack, S.L.; Wells, J.G.

1982-01-01

The H-9 complex, a group of three closely spaced boreholes, is located 5.5 miles south of the proposed Waste Isolation Pilot Plant (WIPP) site in east-central Eddy County, New Mexico. The holes were drilled during July, August, and September 1979 to obtain geologic and hydrologic data to better define the regional ground-water-flow system. The geologic data presented in this report are part of a site-characterization study for the possible storage of defense-associated radioactive wastes within salt beds of the Salado Formation of Permian age. The geologic data include detailed descriptions of cores, cuttings, and geophysical logs. Each borehole was designed to penetrate a distinct water-bearing zone: H-9a (total depth 559 feet) was completed just below the Magenta Dolomite Member of the Rustler Formation; H-9b (total depth 708 feet) was completed just below the Culebra Dolomite Member of the Rustler Formation; H-9c (total depth 816 feet) was completed below the Rustler Formation-Salado Formation contact. The geologic units penetrated in borehole H-9c are eolian sand of Holocene age (0-5 feet); the Gatuna Formation of Pleistocene age; (5-25 feet); and the Dewey Lake Red Beds (25-455 feet), the Rustler Formation (455.791 feet), and part of the Salado Formation (791-816 feet), all of Permian age. Three sections (494-501 feet, 615-625 feet, 692-712 feet) in the Rustler Formation penetrated by borehole H-9c are composed of remnant anhydrite (locally altered to gypsum) and clay and silt residue from the dissolution of much thicker seams of argillaceous and silty halite. This indicates that the eastward-moving dissolution within the Rustler Formation, found just to the west of the WIPP site, is present at the H-9 site. (USGS)

Geochemistry of Salado formation brines recovered from the Waste Isolation Pilot Plant (WIPP) repository

International Nuclear Information System (INIS)

Abitz, R.; Myers, J.; Drez, P.; Deal, D.

1990-01-01

Intergranular brines recovered from the repository horizon of the Waste Isolation Pilot Plant (WIPP) have major- and trace-element compositions that reflect seawater evaporation and diagenetic processes. Brines obtained from repository drill holes are heterogeneous with respect to composition but their compositional fields are distinct from those obtained from fluid inclusions in WIPP halite. The heterogeneity of brine compositions within the drill-hole population indicates a lack of mixing and fluid homogenization within the salt at the repository level. Compositional differences between intergranular (drill hole) and intragranular (fluid inclusions) brines is attributed to isolation of the latter from diagenetic fluids that were produced from dehydration reactions involving gypsum and clay minerals. Modeling of brine-rock equilibria indicates that equilibration with evaporite minerals controls the concentrations of major elements in the brine. Drill-hole brines are in equilibrium with the observed repository minerals halite, anhydrite, magnesite, polyhalite and quartz. The equilibrium model supports the derivation of drill-hole brines from near-field fluid, rather than large-scale vertical migration of fluids from the overlying Rustler or underlying Castile Formations. 13 refs., 6 figs., 6 tabs

Geochemistry of Salado Formation brines recovered from the Waste Isolation Pilot Plant (WIPP) repository

International Nuclear Information System (INIS)

Abitz, R.; Myers, J.; Drez, P.; Deal, D.

1990-01-01

Intergranular brines recovered from the repository horizon of the Waste Isolation Pilot Plant (WIPP) have major- and trace-element compositions that reflect seawater evaporation and diagenetic processes. Brines obtained from repository drill holes are heterogenous with respect to composition, but their compositional fields are distinct from those obtained from fluid inclusions in WIPP halite. The heterogeneity of brine compositions within the drill-hole population indicates a lack of mixing and fluid homogenization within the salt at the repository level. Compositional differences between intergranular (drill hole) and intragranular (fluid inclusions) brines is attributed to isolation of the latter from diagenetic fluids that were produced from dehydration reactions involving gypsum and clay minerals. Modeling of brine-rock equilibria indicates that equilibration with evaporite minerals controls the concentrations of major elements in the brine. Drill-hole brines are in equilibrium with the observed repository minerals halite, anhydrite, magnesite, polyhalite and quartz. The equilibrium model supports the derivation of drill-hole brines from near-field fluid, rather than large-scale vertical migration of fluids from the overlying Rustler or underlying Castile Formations. 13 refs., 6 figs., 6 tabs

Lithologic boundaries from gravity and magnetic anomalies over Proterozoic Dalma volcanics

Science.gov (United States)

Yadav, Pramod Kumar; Adhikari, P. K.; Srivastava, Shalivahan; Maurya, Ved P.; Tripathi, Anurag; Singh, Shailendra; Singh, Roshan K.; Bage, Ashish K.

2018-03-01

Dalma volcanics (DVs) has intruded the older Singhbhum Group of Metapelites. Despite DVs being rich in mineralisation, its boundaries are not clearly demarcated. Gravity and magnetic surveys have been attempted for mapping the boundaries in DVs. These surveys were made in the northern fringe of the DVs over an area of ˜ 0.70 km2 along 13 parallel lines at 50 m spacing. The data was acquired at ˜ 25 m spacing. The surveys were taken for determination of lithological boundaries, depths and nature of causative source using Euler depth solutions and radially averaged power spectrum (RAPS). Residual anomaly maps of gravity and magnetic intensity show the same trend as that of Bouguer gravity anomaly and total magnetic intensity anomaly map indicating towards shallow sources. The magnetic map in general follows the same pattern as that of gravity anomaly maps. The map shows coincident high gravity and magnetic anomalies. These anomalies together with resistivity signatures confirm that the northern fringe of DVs hosts volcanogenic massive sulphide settings. The Euler depth solution delineated the lateral boundaries and nature of the source. It seems that the source is of spherical nature lying within a depth range of 25-40 m. The obtained lithological (vertical) units from RAPS are between Lower DVs, Upper DVs and Singhbhum Group Metapelites at depths of ˜ 15, ˜ 25 and ˜ 40 m, respectively. The metallogeny is associated with the Upper DVs and the corresponding delineated lithological (vertical) unit is indicative of the top of the ore body. Good agreement is observed with the geological succession from the drilling data and resistivity data. The findings suggest that the northern fringe of DVs could be a preferred target for drilling.

Classification of lithological units based on geophysical borehole logging - data from the Stripa mine

International Nuclear Information System (INIS)

Triumf, C.A.

1992-06-01

At the Crosshole site, located at the 360 m level in the Stripa mine, six boreholes F1-F6 have been drilled in a fanlike fashion. To achieve further knowledge of the geological conditions in the rock volumes outside the major tectonized zones, a classification of the pseudo-lithology has been carried out using data from boreholes F3-F6. The analysis has been supported by determination of density and magnetic susceptibility on core samples from boreholes F1-F5. This study demonstrates that the bulk of the tectonically less disturbed rock, forming the matrix in a network of dominant tectonical features, can be considered as homogeneous according to the silicate density. Three volumes with deviating lithology have however been identified in more than one borehole. Furthermore narrow sections are encountered, showing mineralogical, and probably also, micro-structural deviations from the normal granite. These narrow sections are irregularly spread along the boreholes. Their irregular distribution and narrowness, prevents correlation between boreholes. The result of the lithology identification is displayed using a modified Briggs cube. The method used in this project is applicable in many stages of an investigation programme where different disciplines are co-operating and partly complex information must be passed between individuals. (au)

A review of WIPP [Waste Isolation Pilot Plant] repository clays and their relationship to clays of adjacent strata

International Nuclear Information System (INIS)

Krumhansl, J.L.; Kimball, K.M.; Stein, C.L.

1990-12-01

The Salado Formation is a thick evaporite sequence located in the Permian Delaware Basin of southeastern New Mexico. This study focuses on the intense diagenetic alteration that has affected the small amounts of clay, feldspar, and quartz washed into the basin during salt deposition. These changes are of more than academic interest since this formation also houses the WIPP (Waste Isolation Pilot Plant). Site characterization concerns warrant compiling a detailed data base describing the clays in and around the facility horizon. An extensive sampling effort was undertaken to address these programmatic issues as well as to provide additional insight regarding diagenetic mechanisms in the Salado. Seventy-five samples were collected from argillaceous partings in halite at the stratigraphic level of the Waste Isolation Pilot Plant (WIPP). These were compared with twenty-eight samples from cores of the Vaca Triste member of the Salado, a thin clastic unit at the top of the McNutt potash zone, and with a clay-rich sample from the lower contact of the Culebra Dolomite (in the overlying Rustler Formation). These settings were compared to assess the influence of differences in brine chemistry (i.e., halite and potash facies, normal to hypersaline marine conditions) and sediment composition (clays, sandy silt, dolomitized limestone) on diagenetic processes. 44 refs., 11 figs., 5 tabs

Performance evaluation of groundwater model hydrostratigraphy from airborne electromagnetic data and lithological borehole logs

DEFF Research Database (Denmark)

Marker, Pernille Aabye; Foged, N.; He, X.

2015-01-01

resistivity and clay fraction are classified into hydrostratigraphic zones using k-means clustering. Hydraulic conductivity values of the zones are estimated by hydrological calibration using hydraulic head and stream discharge observations. The method is applied to a Danish case study. Benchmarking......Large-scale hydrological models are important decision support tools in water resources management. The largest source of uncertainty in such models is the hydrostratigraphic model. Geometry and configuration of hydrogeological units are often poorly determined from hydrogeological data alone. Due...... present a novel method to automatically integrate large AEM data sets and lithological information into large-scale hydrological models. Clay-fraction maps are produced by translating geophysical resistivity into clay-fraction values using lithological borehole information. Voxel models of electrical...

Lithologic Effects on Landscape Response to Base Level Changes: A Modeling Study in the Context of the Eastern Jura Mountains, Switzerland

Science.gov (United States)

Yanites, Brian J.; Becker, Jens K.; Madritsch, Herfried; Schnellmann, Michael; Ehlers, Todd A.

2017-11-01

Landscape evolution is a product of the forces that drive geomorphic processes (e.g., tectonics and climate) and the resistance to those processes. The underlying lithology and structural setting in many landscapes set the resistance to erosion. This study uses a modified version of the Channel-Hillslope Integrated Landscape Development (CHILD) landscape evolution model to determine the effect of a spatially and temporally changing erodibility in a terrain with a complex base level history. Specifically, our focus is to quantify how the effects of variable lithology influence transient base level signals. We set up a series of numerical landscape evolution models with increasing levels of complexity based on the lithologic variability and base level history of the Jura Mountains of northern Switzerland. The models are consistent with lithology (and therewith erodibility) playing an important role in the transient evolution of the landscape. The results show that the erosion rate history at a location depends on the rock uplift and base level history, the range of erodibilities of the different lithologies, and the history of the surface geology downstream from the analyzed location. Near the model boundary, the history of erosion is dominated by the base level history. The transient wave of incision, however, is quite variable in the different model runs and depends on the geometric structure of lithology used. It is thus important to constrain the spatiotemporal erodibility patterns downstream of any given point of interest to understand the evolution of a landscape subject to variable base level in a quantitative framework.

Shear weakening for different lithologies observed at different saturation stages

Science.gov (United States)

Diethart-Jauk, Elisabeth; Gegenhuber, Nina

2018-01-01

For this study, samples from different lithologies ("Leitha"-limestone, "Dachstein"-limestone, "Haupt"-dolomite, "Bunt"-sandstone, Grey Berea sandstone, granite, quartzite and basalt) were selected. Samples were dried at 70 °C, respectively 105 °C and were saturated with brine. Mass, porosity, permeability, compressional and shear wave velocity were determined from dry and brine saturated samples at laboratory conditions, based on an individual measurement program. Shear modulus was calculated to find out, if shear weakening exists for the dataset. Shear weakening means that shear modulus of dry samples is higher than of saturated samples, but it is assumed that shear modulus is unaffected by saturation. "Dachstein"-limestone and basalt show shear weakening, quartzite samples show both weakening and hardening. Granite samples are affected by temperature, after drying with 105 °C no change can be observed anymore. "Bunt"-sandstone samples show a change in the shear modulus in a small extent, although they may contain clay minerals. The other lithologies show no effect. Explanations for carbonate samples can be the complicated pore structure, for basalt it could be that weathering creates clay minerals which are known as causes for a change of the shear modulus. Fluid viscosity can also be an important factor.

Analysis of solutes in groundwaters from the Rustler Formation at and near the Waste Isolation Pilot Plant site

International Nuclear Information System (INIS)

Robinson, K.L.

1997-09-01

Between 1976 and 1986, groundwater samples from more than 60 locations in the vicinity of the Waste Isolation Pilot Plant site were collected and analyzed for a variety of major, minor, and trace solutes. Most of the samples were from the Rustler Formation (the Culebra Dolomite, the Magenta Dolomite, or the zone at the contact between the Rustler and underlying Salado Formations) or the Dewey Lake Red Beds. The analytical data from the laboratories are presented here with accompanying discussions of sample collection methods, supporting field measurements, and laboratory analytical methods. A comparison of four data sets and a preliminary evaluation of the data for the major solutes (Cl - , SO 4 -2 , Na, K, Ca, and Mg) shows that the data for samples analyzed by UNC/Bendix for SNL seem to be the most reliable, but that at some locations, samples representative of the native, unperturbed groundwater have not been collected. At other locations, the water chemistry has apparently changed between sampling episodes

Characterization of major lithologic units underlying the lower American River using water-borne continuous resistivity profiling, Sacramento, California, June 2008

Science.gov (United States)

Ball, Lyndsay B.; Teeple, Andrew

2013-01-01

The levee system of the lower American River in Sacramento, California, is situated above a mixed lithology of alluvial deposits that range from clay to gravel. In addition, sand deposits related to hydraulic mining activities underlie the floodplain and are preferentially prone to scour during high-flow events. In contrast, sections of the American River channel have been observed to be scour resistant. In this study, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, explores the resistivity structure of the American River channel to characterize the extent and thickness of lithologic units that may impact the scour potential of the area. Likely lithologic structures are interpreted, but these interpretations are non-unique and cannot be directly related to scour potential. Additional geotechnical data would provide insightful data on the scour potential of certain lithologic units. Additional interpretation of the resistivity data with respect to these results may improve interpretations of lithology and scour potential throughout the American River channel and floodplain. Resistivity data were collected in three profiles along the American River using a water-borne continuous resistivity profiling technique. After processing and modeling these data, inverted resistivity profiles were used to make interpretations about the extent and thickness of possible lithologic units. In general, an intermittent high-resistivity layer likely indicative of sand or gravel deposits extends to a depth of around 30 feet (9 meters) and is underlain by a consistent low-resistivity layer that likely indicates a high-clay content unit that extends below the depth of investigation (60 feet or 18 meters). Immediately upstream of the Watt Avenue Bridge, the high-resistivity layer is absent, and the low-resistivity layer extends to the surface where a scour-resistant layer has been previously observed in the river bed.

Comparación de los cambios químicos y microbiológicos en la maduración del queso Colonia salado tradicionalmente y por impregnación al vacío

Directory of Open Access Journals (Sweden)

María José Crosa

2011-05-01

Full Text Available El queso Colonia es un queso típico uruguayo, elaborado según los criterios de calidad y tradición quesera de inmigrantes suizos radicados en el departamento de Colonia. Su investigación y publicación aportan conocimiento para la difusión de un proceso que aún no presenta denominación de origen protegida. El objetivo del estudio fue investigar si la tecnología de salado por impregnación en vacío afecta el proceso de maduración del queso Colonia en comparación con el proceso de salado tradicional. Para el seguimiento de los cambios se realizaron determinaciones del índice de maduración, concentración del cloruro de sodio en agua del queso, el pH y la evolución de las bacterias Lactococcus lactis, Lactococcus lactis subsp. diacetylactis, Leuconostoc subsp. mesenteroides y Propionibacterium. Al fi nalizar la maduración, se evaluaron sensorialmente los atributos de textura, sabor y aroma, apariencia externa y apariencia interna. Las condiciones operativas elegidas del salado por impregnación en vacío lograron el mismo ingreso de sal que las del proceso tradicional y en la mitad del tiempo. No se observaron diferencias en ningunode los parámetros químicos y microbiológicos estudiados. En lo sensorial tampoco se apreciaron diferencias en el fl avor, textura y apariencia externa. Se hallaron ciertas diferencias en el tamaño y distribución de los ojos.Abstract“Colonia” type cheese is a typical Uruguayan cheese, elaborated following the quality standards and cheese making tradition brought by Swiss immigrants settled down at the Uruguayan department of Colonia. Its study and outreach provide knowledge to the diffusion of a process wich does not present a protected designation of origin. The aim of the study was to analize if the vacuum impregnation technology affects Colonia cheese ripening process compared with the traditional salting methods. Chemical, microbiological and sensory changes during ripening after both, SIV and

Hydraulic Characterization Activities in Support of the Shaft-Seals Fluid-Flow Modeling Integration into the WIPP EPA Compliance Certification Application

International Nuclear Information System (INIS)

Knowles, M.K.; Hurtado, L.D.; Dale, Tim

1997-12-01

The Waste Isolation Pilot Plant (WIPP) is a planned geologic repository for permanent disposal of transuranic waste generated by the U.S. Department of Energy. Disposal regions consist of panels and drifts mined from the bedded salt of the Salado Formation at a depth of approximately 650 m below the surface. This lithology is part of the 225 million year old Delaware Basin, and is geographically located in southeastern New Mexico. Four shafts service the facility needs for air intake, exhaust, waste handling, and salt handling. As the science advisor for the project, Sandia National Laboratories developed the WIPP shaft sealing system design. This design is a fundamental component of the application process for facility licensing, and has been found acceptable by stakeholders and regulatory agencies. The seal system design is founded on results obtained from laboratory and field experiments, numerical modeling, and engineering judgment. This paper describes a field test program to characterize the fluid flow properties in the WIPP shafts at representative seal locations. This work was conducted by Duke Engineering and Services under contract to Sandia National Laboratories in support of the seal system design

An analysis of the lithology to resistivity relationships using airborne EM and boreholes

DEFF Research Database (Denmark)

Barfod, Adrian A.S.; Christiansen, Anders Vest; Møller, Ingelise

2014-01-01

We present a study of the relationship between dense airborne skyTEM resistivity data and sparse lithological borehole data. Understanding the resistivity structure of the subsurface is of great importance to hydrogeological surveys and to ensure a high standard for groundwater quality. Borehole ...

Determination of Soft Lithology Causes The Land Subsidence in Coastal Semarang City by Resistivity Methods

Science.gov (United States)

Widada, Sugeng; Saputra, Sidhi; Hariadi

2018-02-01

Semarang City is located in the northern coastal plain of Java which is geologically composed of alluvial deposits. The process of the sediment diagenesis has caused a land subsidence. On the other hand, the development of the industrial, service, education and housing sectors has increased the number of building significantly. The number of building makes the pressure of land surface increased, and finally, this also increased the rate of land subsidence. The drilling data indicates that not all layers of lithology are soft layers supporting the land subsidence. However, vertical distribution of the soft layer is still unclear. This study used Resistivity method to map out the soft zone layers of lithology. Schlumberger electrode configuration with sounding system method was selected to find a good vertical resolution and maximum depth. The results showed that the lithology layer with resistivity less than 3 ohm is a layer of clay and sandy clay that has the low bearing capacity so easily compressed by pressure load. A high land subsidence is happening in the thick soft layer. The thickness of that layer is smaller toward the direction of avoiding the beach. The improvement of the bearing capacity of this layer is expected to be a solution to the problem of land subsidence.

Lithologically inherited variation in Pb isotope ratios in sedimentary soils in The Netherlands

NARCIS (Netherlands)

Walraven, N.; Gaans, P.F.M. van; Veer, G. van der; Os, B.J.H. van; Klaver, G.T.; Vriend, S.P.; Middelburg, J.J.; Davies, G.R.

2013-01-01

Knowledge on the lithologically inherited variation in present day Pb isotope ratios in soils is remarkably limited. Such information is essential to determine the anthropogenic Pb fraction and anthropogenic Pb sources in Pb-polluted soils. This study presents results of a survey of subsoil samples

Borehole Stability in High-Temperature Formations

Science.gov (United States)

Yan, Chuanliang; Deng, Jingen; Yu, Baohua; Li, Wenliang; Chen, Zijian; Hu, Lianbo; Li, Yang

2014-11-01

In oil and gas drilling or geothermal well drilling, the temperature difference between the drilling fluid and formation will lead to an apparent temperature change around the borehole, which will influence the stress state around the borehole and tend to cause borehole instability in high geothermal gradient formations. The thermal effect is usually not considered as a factor in most of the conventional borehole stability models. In this research, in order to solve the borehole instability in high-temperature formations, a calculation model of the temperature field around the borehole during drilling is established. The effects of drilling fluid circulation, drilling fluid density, and mud displacement on the temperature field are analyzed. Besides these effects, the effect of temperature change on the stress around the borehole is analyzed based on thermoelasticity theory. In addition, the relationships between temperature and strength of four types of rocks are respectively established based on experimental results, and thermal expansion coefficients are also tested. On this basis, a borehole stability model is established considering thermal effects and the effect of temperature change on borehole stability is also analyzed. The results show that the fracture pressure and collapse pressure will both increase as the temperature of borehole rises, and vice versa. The fracture pressure is more sensitive to temperature. Temperature has different effects on collapse pressures due to different lithological characters; however, the variation of fracture pressure is unrelated to lithology. The research results can provide a reference for the design of drilling fluid density in high-temperature wells.

Simulating reservoir lithologies by an actively conditioned Markov chain model

Science.gov (United States)

Feng, Runhai; Luthi, Stefan M.; Gisolf, Dries

2018-06-01

The coupled Markov chain model can be used to simulate reservoir lithologies between wells, by conditioning them on the observed data in the cored wells. However, with this method, only the state at the same depth as the current cell is going to be used for conditioning, which may be a problem if the geological layers are dipping. This will cause the simulated lithological layers to be broken or to become discontinuous across the reservoir. In order to address this problem, an actively conditioned process is proposed here, in which a tolerance angle is predefined. The states contained in the region constrained by the tolerance angle will be employed for conditioning in the horizontal chain first, after which a coupling concept with the vertical chain is implemented. In order to use the same horizontal transition matrix for different future states, the tolerance angle has to be small. This allows the method to work in reservoirs without complex structures caused by depositional processes or tectonic deformations. Directional artefacts in the modeling process are avoided through a careful choice of the simulation path. The tolerance angle and dipping direction of the strata can be obtained from a correlation between wells, or from seismic data, which are available in most hydrocarbon reservoirs, either by interpretation or by inversion that can also assist the construction of a horizontal probability matrix.

Structural and Lithological Controls upon Fluid Migration within the Chalk and Upper Greensand Aquifers in the Chilterns and Lambourn Downs

OpenAIRE

Thompson, Sally

2002-01-01

The influence of lithological heterogeneities, structural discontinuities and discontinuity surface mineralisation upon groundwater migration within the Chalk and the Upper Greensand of southern England has been investigated. Lithological heterogeneities in the Chalk succession include marl seams, hardgrounds, tabular flints and nodular flints. Each of these heterogeneities has a lower intrinsic porosity and permeability than in the calcite rich chalk. The influence that each of these ...

Systematic Lithologic Calibration of Neogene Mass-Transport Deposits Seismic Character in Mississippi Canyon of the Northern Gulf of Mexico, USA.

Science.gov (United States)

Gutierrez, M. A.; Snedden, J.

2017-12-01

Few publications have attempted detailed lithologic calibration of Mass Transport Deposits, usually as a byproduct of mud log descriptions. While the principal motivation for further understanding these slope failure deposits are driven by the economics of deep-water hydrocarbon exploration, the geohazard-related risks of storm-wave loading, and the shallow gas, also provide a driving concern for these deposits. Such risks can be mitigated and prevented by in depth analysis of slope stability and failure. The Mississippi Canyon of the Northern Gulf of Mexico is one of the few basins to contain enough available density of seismic and well data to provide a well-constrained lithologic characterization throughout a MTD-rich continental margin. The proposed hypothesis evaluates: 1) the differences between attached and detached MTDs in the Neogene Northern Gulf of Mexico through seismic characterization and well log analysis, 2) variations of MTD dimensions and map geometries in relation to depositional age throughout the northeastern and northcentral Gulf of Mexico, and 3) the differentiation between sand-prone and shale-prone MTD's in relation to associated depositional mechanisms. This study will attempt lithologic calibration of MTDs in Pleistocene -Miocene strata of the study area through integration of seismic observations (focused in supra-salt basins, which have the highest seismic data quality) and lithologic related information extracted from logs, mud logs (cuttings), and available core data to further constrain the distribution of MTD types, lithology, and geometries. Initial interpretations reflect a variance of seismic character responses to the presence of sandstone and shale (constrained by wells) throughout different regions and salt tectonic domains of the MTD geobodies. Further analysis will relate different seismic facies throughout MTDs to improve the understanding of seismic character and related lithologic facies throughout the deposits, in

Reactivity of Ordinary Portland Cement (OPC) grout and various lithologies from the Harwell research site

International Nuclear Information System (INIS)

Milodowski, A.E.; George, I.A.; Bloodworth, A.J.; Robins, N.S.

1985-08-01

Ordinary Portland Cement (OPC) has been used in the completion of boreholes on the Harwell Research Site, AERE, Oxfordshire. The purpose of this study was to examine the effect of OPC and the alkaline pore fluids generated during its setting on the various lithological types encountered in the boreholes. To facilitate this, samples of core representing the various rock types were selected and cement-rock composites were prepared from these in the laboratory to simulate the borehole cements. After a curing period of 15 months the cores and associated cement plugs were examined for any signs of reactivity or bonding. The best cement-rock bonding was shown by naturally well-cemented sandstone and limestone lithologies. Although no significant chemical reaction was seen to have occurred between OPC and rock, the OPC appears able to bind onto the rock surface because of the rigidity of the rock surface. Therefore, the best cement rock bonding and seal with OPC may be expected in the limestones of the Great Oolite Group, Inferior Oolite Group and parts of the Corallian Beds. Because of the reactivity of OPC towards certain lithologies a better borehole seal in such a sedimentary sequence might be achieved using a bentonite backfill in those parts of the sequence which either react with or bond only weakly to OPC. (author)

Formation evaluation of fractured basement, Cambay Basin, India

International Nuclear Information System (INIS)

Gupta, Saurabh Datta; Farooqui, M Y; Chatterjee, Rima

2012-01-01

Unconventional reservoirs such as fractured basalts, shale gas and tight sand are currently playing an important role in producing a significant amount of hydrocarbon. The Deccan Trap basaltic rocks form the basement of the Cambay Basin, India, and hold commercially producible hydrocarbon. In this study two wells drilled through fractured basalts are chosen for evaluating the lithology, porosity and oil saturation of the reservoir sections. Well logs, such as gamma ray, high resolution resistivity, litho density, compensated neutron and elemental capture spectroscopy, have been used in cross-plotting techniques for lithology and mineral identification. Formation micro imagery log data have been analysed to quantify the fractures and porosity in the fractured reservoirs for a well in the south Ahmedabad block of the Cambay Basin. The results of the analysis of two wells are presented and discussed and they are found to be in good agreement with geological and production data. (paper)

The impact of mixing lithologies in clast shape measurements on its discriminatory power - a case study from a temperate Alpine glacier

Science.gov (United States)

Lukas, S.; Coray, S.; Graf, A.; Schlüchter, C.

2009-04-01

Clast shape measurements have become a standard tool in the reconstruction of transport histories in a variety of depositional settings (Demir et al., 2009). In glacial environments, the combined use of clast form and roundness has become an established tool in the past 15 years or so, and environments where this tool has been used range from temperate and polythermal to cold-based glaciers. In addition, the method has been transferred to palaeo-environments where the knowledge gained in aforementioned studies has taken the degree of accuracy in sedimentological investigations to a higher level (cf. Lukas et al., 2009, and references therein). All of these studies use the approach originally advocated by Benn and Ballantyne (1994), but perhaps the most notable difference is that some researchers mix different lithologies within their samples of 50 clasts. However, the role of lithology on clast shape in a glacial environment has never been systematically analysed, except for one pilot study (Bennett et al., 1997). Likewise, some previous studies have highlighted the problem of distinguishing between fluvial and subglacially-transported clasts using co-variance plots, and thus, more work is needed in both these respects. We here present a set of clast shape data gathered from the foreland and surrounding slopes of temperate Findelengletscher, Switzerland, to (a) test the versatility of clast shape in distinguishing of populations of clasts transported along different paths and (b) assess the role of lithology on the discriminatory potential of the method, most notably using co-variance plots. The main result of this pilot study is that the sampled lithology has a marked effect on clast shape results within the same control group. This is manifest in an overlap of envelopes in both RA- or RWR-C40-covariance plots. If kept separate, all three lithologies display separate control envelopes, in this case in RWR-C40-co-variance plots, thus keeping their discriminatory

Riesgo de anegamiento: estimaciones para la Cuenca Baja del Río Salado Flooding risk in the Salado River Basin

Directory of Open Access Journals (Sweden)

Pablo Mauricio Vázquez

2009-12-01

.571 ha eran sitios donde la recurrencia de anegamiento fue >40%, y que el 7,98% de la superficie destinada a verdeos (51.504 ha se realizaron en sitios riesgosos.It is well documented that the lower basin of the Salado River has been always exposed to frequent floods. Nevertheless, from 1986 to 2001 the cultivated surface of the Flooding Pampas increased by 69%, being this agricultural expansion mostly over lands that have been periodically affected by floods. A flooding risk analysis was carried out in order to assist with the planning and disposition of farming activities in the Flooding Pampas. For this purpose, the recurrence of precipitations was calculated over 20 meteorological stations, and linked to a by-pixel flooding frequency layer resultant from an analysis of a time-series of satellite images. Results denote that extreme events of accumulated precipitation have been registered in all seasons, being autumn and winter flooding events more prolonged than the spring and summer ones. Even though autumn and winter had similar flooding durabilities, autumn turned out to be the critical season as a result of a higher frequency of flooding events in April and May. Severe flooding could occur when precipitations exceed 150-200 mm, as precipitation accumulations of these magnitudes were related to flooded areas equivalent to 68.76% of the region (5,844,709 ha. Anthropic structures contributed to as much as 2.11% of the regional flooding, as shown by the flooding pattern of the region, being channels 12, 11 and 9, as well as the provincial highway No. 9 and the train rail from Metrovías the main impediments for the water flow. For the 2003-2004 period, we deter-mined through remote sensing techniques that 22.8% of the surface with crop production (173,571 ha corresponded to areas with a flooding recurrence higher than 40%, whereas only 7.98% of the surface with sown pastures (51,504 ha corresponded to risky areas.

Analysis on depositional system and discussion on ore-formation conditions of channel sandstone type uranium deposit. Taking Dongsheng area, Ordos meso-cenozoic basin as an example

International Nuclear Information System (INIS)

Wu Rengui; Yu Dagan; Zhu Minqiang; Zhou Wanpeng; Chen Anping

2003-01-01

Applying the theory of depositional system, the depositional facies and depositional systems of the Zhiluo Formation in Dongsheng area are systematically analysed, and the authors proposed that sediments of the Zhiluo Formation are of fluvial facies, and streams of the Zhiluo time experienced three evolution stages, namely: the early braided stream, the middle low sinuosity meandering stream and the late high sinuosity meandering stream. Based on features of paleoclimatic evolution, the Zhiluo Formation is divided into two lithological members. The lower lithological member consists of sediments of braided and low sinuosity meandering streams under humid-ward paleoclimatic conditions forming grey sedimentary formation. The upper member is composed of sediments of meandering streams under arid-hot paleoclimatic conditions representing complex-colored (mainly red) sedimentary formation. It is suggested that uranium mineralization in the study area is of channel sandstone type and controlled by braided channel sediments. Besides, the ore-formation conditions for channel sandstone type uranium deposit are preliminarily discussed

Parameters controlling fracturing distribution: example of an Upper Jurassic marly-calcareous formation (eastern Paris Basin)

International Nuclear Information System (INIS)

Andre, G.; Rebours, H.; Wileveau, Y.; Proudhon, B.

2006-01-01

Study of fractures along a 490-m vertical section of marl/limestone alternations in the Upper Jurassic (Meuse/Haute-Marne underground research laboratory-eastern Paris Basin) reveals their organization and the different states of palaeo-stress. Type and extension of tectonic structures seem to be controlled principally by lithology and secondary by depth. Also, it appears deviations of Alpine palaeo-stresses between Kimmeridgian and Oxfordian formations. These deviations are related to the presence of marl/limestone contacts. The vertical evolution of current horizontal maximum stress shows a similar behaviour, with deviations at the walls of Callovo-Oxfordian argilites. These results allow us to point out and to discuss the impact of lithology, rheology and depth on fracturing occurrence and distribution. Furthermore, this study suggests the role of Callovo-Oxfordian as a barrier for fracture development between the limestones of Dogger and Oxfordian formations. (authors)

Itataia's phosphorous-uraniferous deposit - Alteration and argilization influence in physical processing of the mineralized lithologies

International Nuclear Information System (INIS)

Rosa, C.V.

1986-01-01

This study was developed by NUCLEBRAS, firstly defining the quality and quantity of the Itataia ore body untill the 480 m level of the future pit, considering the lithological types, the P 2 O 5 and U 3 O 8 contents and the alteration and argillization of the rocks. The following step was to establish the physicochemical character of the mineralized lithologies according to the phases of alteration/argillization. Finally it was compared the results of these two stages with the results of the pilot treatment, related to the gangue in the phosphoric acid concentrate. The method showed the difficulties in each host rock, differently altered/argillized for future process and allowed to the identification of seven types of material to supply the Itataia pilot plant. (author) [pt

The Messinian evaporites in the Levant Basin: lithology, deformation and its evolution

Science.gov (United States)

Feng, Ye; Steinberg, Josh; Reshef, Moshe

2017-04-01

The lithological composition of the Messinian evaporite in the Levant Basin remains controversial and salt deformation mechanisms are still not fully understood, due to the lack of high resolution 3D depth seismic data and well logs that record the entire evaporite sequence. We demonstrate how 3D Pre-stack depth migration (PSDM) and intra-salt tomography can lead to improved salt imaging. Using 3D PSDM seismic data with great coverage and deepwater well log data from recently drilled boreholes, we reveal intra-salt reflective units associated with thin clastic layers and a seismic transparent background consisting of uniform pure halite. Structural maps of all internal reflectors are generated for stratigraphy and attributes analysis. High amplitude fan structures in the lowermost intra-salt reflector are observed, which may indicate the source of the clastic formation during the Messinian Salinity Crisis (MSC). The Messinian evaporite in the Levant Basin comprises six units; the uppermost unit thickens towards the northwest, whereas the other units are uniform in thickness. The top of salt (TS) horizon is relatively horizontal, while all other intra-salt reflectors and base of salt (BS) dip towards the northwest. Different seismic attributes are used for identification of intra-salt deformation patterns. Maximum curvature maps show NW-striking thrust faults on the TS and upper intra-salt units, and dip azimuth maps are used to show different fold orientations between the TS and intra-salt units, which indicate a two-phase deformation mechanism: basin NW tilting as syn-depositional phase and NNE spreading of Plio-Pleistocene overburden as post-depositional phase. RMS amplitude maps are used to identify a channelized system on the TS. An evaporite evolution model during the MSC of the Levant Basin is therefore established based on all the observations. Finally the mechanical properties of the salts will be utilized to explore salt deformation in the Levant Basin

Evolved-Lithology Clasts in Lunar Breccias: Relating Petrogenetic Diversity to Measured Water Content

Science.gov (United States)

Christoffersen, R.; Simon, J. J.; Ross, D. K.

2017-01-01

Studies of the inventory and distribution of water in lunar rocks have recently begun to focus on alkali suite samples as possible water repositories, particularly the most highly evolved granitoid lithologies. Although H analyses of feldspars in these rocks have so far pointed to 'low' (less than 20 ppm) H2O contents, there is sufficient variability in the dataset (e.g., 2-20 ppm) to warrant consideration of the petrogenetic factors that may have caused some granitoid-to-intermediate rocks to be dryer or wetter than others. Given that all examples of these rocks occur as clasts in complex impact breccias, the role of impact and other factors in altering water contents established by primary igneous processes becomes a major factor. We are supporting our ongoing SIMS studies of water in evolved lunar lithologies with systematic SEM and EPMA observations. Here we report a synthesis of the observations as part of developing discriminating factors for reconstructing the thermal, crystallization and shock history of these samples as compared with their water contents.

An automated method to build groundwater model hydrostratigraphy from airborne electromagnetic data and lithological borehole logs

DEFF Research Database (Denmark)

Marker, Pernille Aabye; Foged, N.; He, X.

2015-01-01

of electrical resistivity and clay fraction are classified into hydrostratigraphic zones using k-means clustering. Hydraulic conductivity values of the zones are estimated by hydrological calibration using hydraulic head and stream discharge observations. The method is applied to a Danish case study......Large-scale integrated hydrological models are important decision support tools in water resources management. The largest source of uncertainty in such models is the hydrostratigraphic model. Geometry and configuration of hydrogeological units are often poorly determined from hydrogeological data......-scale groundwater models. We present a novel method to automatically integrate large AEM data-sets and lithological information into large-scale hydrological models. Clay-fraction maps are produced by translating geophysical resistivity into clay-fraction values using lithological borehole information. Voxel models...

The depth of sub-lithospheric diamond formation and the redistribution of carbon in the deep mantle

Science.gov (United States)

Beyer, Christopher; Frost, Daniel J.

2017-03-01

Most diamonds form in the Earth's lithosphere but a small proportion contain Si-rich majoritic garnet inclusions that indicate formation in the deeper mantle. The compositions of syngenetic garnet inclusions can potential yield information on both the depth and mantle lithology in which the diamonds formed. Pressure dependent changes in garnet compositions have been calibrated using the results of experiments conducted in a multi-anvil apparatus at pressures between 6 and 16 GPa and temperatures of 1000 to 1400 °C. Using the results of these experiments a barometer was formulated based on an empirical parameterisation of the two major majoritic substitutions, referred to as majorite (Maj; Al3+ =Mg2+ +Si4+), and Na-majorite (Na-Maj; Mg2+ +Al3+ =Na+ +Si4+). Moreover, previously published experimental garnet compositions from basaltic, kimberlite, komatiite and peridotite bulk compositions were included in the calibration, which consequently covers pressures from 6 to 20 GPa and temperatures from 900 to 2100 °C. Experimental pressures are reproduced over these conditions with a standard deviation of 0.86 GPa. The barometer is used to determine equilibration pressures of approximately 500 reported garnet inclusions in diamonds from a range of localities. As the majority of these inclusions are proposed to be syngenetic this allows a detailed picture of diamond formation depths and associated source rocks to be established using inclusion chemistry. Geographic differences in diamond source rocks are mapped within the sub-lithospheric mantle to over 500 km depth. Continuous diamond formation occurs over this depth range within lithologies with eclogitic affinities but also in lithologies that appear transitional between eclogitic and peridotitic bulk compositions, with an affinity to pyroxenites. The geographic differences between eclogitic and pyroxenitic diamond source rocks are rationalised in terms of diamond formation within downwelling and upwelling regimes

The Chicxulub event - sulfur-bearing minerals and lithologies

Science.gov (United States)

Strauss, H.; Deutsch, A.

2003-04-01

Evaporates form a major target lithology at the Chicxulub impact site. One of the postulated effects of the impact event at the Cretaceous/Tertiary boundary is the impact-induced dissociation of anhydrite to form sulfur-oxides and a solid residue; large isotope fractionation effects in sulfur should accompany this process. We have analyzed the sulfur isotope composition of (i) annealed anhydrite clasts in impact melt breccias of PEMEX core Yucatan-6 N 19, (ii) unshocked anhydrite from the CSDP well Yaxcopoil-1, which belong to the megabreccia below the suevite layer (YAX-1 1369, and 1376 m depth), and (iii) sulfide grains of hydrothermal origin in a finest-grained breccia, which transects a large limestone block of this megabreccia at a depth of 1369 m. Samples of groups (i) and (ii) yielded δ34S values between 18.0 and 19.8 ppm CDT (unweighted mean is 18.3 ppm, n=7), with one slightly lower value of 15.3 ppm for an anhydrite clast in Y-6 N19/Part 6. These data are in agreement with the δ34S value for the Late Cretaceous seawater (Strauss 1999). The δ34S obviously remained unchanged despite the fact that textural features indicate a severe annealing of the clasts in the impact melt. Sulfides of group (iii) show δ34S values around 41 ppm CDT (n=7), which are quite unusual values if these minerals are of non-biogenic origin. In contrast, δ34S for the yellow glass from the K/T boundary at Haiti range from 1.5 to 13.2 ppm (Chaussidon et al. 1996). Using this preliminary evidence, we conclude that only distant ejecta lithologies, and probably secondary material inside the crater, may display impact-related fractionation of sulfur isotopes. This observation is consistent with petrologic data, modeling results as well as of shock recovery and annealing experiments: anhydrite obviously is quite resistant to shock-related dissociation.

Lithological and mineralogical changes observed in a core from the western Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Reddy, N.P.C.; Rao, K.M.; Putra, S.V.S; Rao, Ch.M.

Lithological and mineralogical studies were carried out on sediments from a 650 cm long core from the north western Bay of Bengal at a depth of 2700 m. These studies demarcate a boundary at 380 cm designated as unit 1 from 0-380 cm and unit 2 from...

The geologic structures observed in drillhole DOE-2 and their possible origins: Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Borns, D.J.

1987-07-01

Questions remain as the origins of evaporite deformation within the Salado and Castile formations. Two miles north of the WIPP site, a stacked sequence of depressions was indicated by shallow boreholes. Such structures raise questions regarding the role of dissolution and gravity tectonics at the WIPP site. To investigate these structures, DOE drilled hole DOE-2 north of the WIPP site. At DOE-2, the downward displacement of stratigraphic markers in the Salado confirmed the presence of stacked depressions, which were the primary target of the drilling program. The halitic units between the marker beds were thickened compared to the average section determined from basin-wide drilling. The remaining question is whether dissolution occurred in the underlying Castile and resulted in the deformation of the Salado. Markers in the anhydrite units indicate recumbent structures and thickening of the anhydrite units by folding. As a consequence, the Castile Formation is nearly its average thickness, with the folded thickness of anhydrite compensating for the missing halite. The nearby thickening of halite within the Castile, the absence of relic anhydrite laminae in the attenuated halite units, and the high strain fabric of the remaining halite suggest that dissolution was not the dominant process in the Castile. The favored hypothesis for the Castile structures is salt flow in response to gravity inversion of the anhydrite and halite units of the Castile. 21 refs., 18 figs

Lithofacies characterization related to the Raigon Formation located in the southern area of the San Jose Department

International Nuclear Information System (INIS)

Spoturno, J.; Morales, E.; Cazaux, S.; Aubet, N.; Loureiro, J.

2004-01-01

In this work the different lithofacies characterization related to the Raigon Formation, located in the southern area of the San Jose Department, is exposed supported by surface and subsurface data. Six stratigraphical sections were constructed considering lithological borehole descriptions to the aim of making a contribution on the spatial distribution, thickness, disposition, lithofaciological variations of this Formation and its stratigraphical relationships with other units [es

Basic Data Report for Drillhole SNL-3 (C-2949)

Energy Technology Data Exchange (ETDEWEB)

Dennis W. Powers; Washington Regulatory and Environmental Services

2005-01-20

SNL-3 (permitted by the New Mexico State Engineer as C-2949) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation within a dissolution reentrant north of the WIPP site and well east of Livingston Ridge. SNL-3 is located in the southeast quarter of section 34, T21S, R31E, in eastern Eddy County, New Mexico. SNL-3 was drilled to a total depth of 970 ft below ground level (bgl). Below surface dune sand, SNL-3 encountered, in order, the Mescalero caliche, Gatuna, Dewey Lake, Rustler, and upper Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Meda?os Members and into the uppermost Salado.

Basic Data Report for Drillhole SNL-3 (C-2949) (Waste Isolation Pilot Plant)

International Nuclear Information System (INIS)

Powers, Dennis W.

2005-01-01

SNL-3 (permitted by the New Mexico State Engineer as C-2949) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation within a dissolution reentrant north of the WIPP site and well east of Livingston Ridge. SNL-3 is located in the southeast quarter of section 34, T21S, R31E, in eastern Eddy County, New Mexico. SNL-3 was drilled to a total depth of 970 ft below ground level (bgl). Below surface dune sand, SNL-3 encountered, in order, the Mescalero caliche, Gatuna, Dewey Lake, Rustler, and upper Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Medanos Members and into the uppermost Salado.

LP-HT anatectic processes and lithological heterogeneity in the Mindelo Migmatite Complex (NW Portugal

Directory of Open Access Journals (Sweden)

Areias, M.

2014-12-01

Full Text Available The Mindelo Migmatitic Complex crops out in the coastal zone north of Porto (Portugal and consists of a set of migmatitic and granitic lithologies. Field relationships, petrography, geochemistry and isotopic signature of the various lithologies allow inferring the sequence of anatectic processes that resulted in their characteristic lithological heterogeneity. The metasedimentary sequences (Schist-Greywacke Complex show chemical composition and isotopic signature identical to the metatexites. So is suggested to be the protolith of Mindelo Migmatite Complex lithologies. The melting has occurred in several structural levels and thus at different pressure and temperature conditions, resulting in rocks with specific characteristics. In shallow levels ( 3. The several pulses of different fluids that affected the Mindelo Migmatitic Complex probably are related to the emplacement of the syn and late- D3 variscan granites. The Mindelo Migmatite Complex represents an example of migmatites formed in low pressure conditions and illustrates some of the reactions involving melting in high grade pelitic rocks and subsequent mineral alterations due to infiltration of late different fluids.El Complejo Migmatítico de Mindelo aflora en la zona costera de Portugal al norte de Oporto y se compone de un conjunto de litologías migmatíticas y graníticas. Las relaciones de campo, petrografía, geoquímica y las características isotópicas de las diferentes litologías permiten inferir la secuencia de procesos anatécticos que dio lugar a su típica heterogeneidad litológica. La composición química e isotópica de la secuencia metasedimentaria del Complejo Esquisto-Grauváquico es idéntica a la de las metatexitas, lo que sugiere que sea el protolito de las litologías del Complejo de Mindelo. La fusión se ha producido en varios niveles estructurales y por lo tanto en diferentes condiciones de presión y temperatura, dando lugar a rocas con caracter

Petrophysical study of Szolnok Formation, Endrod gas field,

Directory of Open Access Journals (Sweden)

Abdel Moktader A. El Sayed

2017-03-01

Full Text Available Results of both porosity and permeability can be used by geologists, petrophysicists, and petroleum engineers to evaluate reservoir rock, heterogeneity, and pore space history through the time of deposition and lithifaction. On the other hand, reservoir quality as well as reservoir classification could be performed based on these data correlation. The Szolnok Formation is composed mainly of turbidity elastic deposits while siltstones are intercalated by sandstone beds and streaks of marls. In the present study, 213 core samples are obtained from the Szolnok Formation of the Great Hungarian plain, Hungary. Both horizontal and vertical permeability are measured. The Szolnok Formation has two main lithologic groups: 1. clean sandstone (141 samples and 2. siltstone – marl (72 samples, it can easily differentiate between good, intermediate or even bad reservoirs. Acoustic laboratory measurements have been carried out for only 30 sandstone rock samples parallel to the bedding plane (horizontal. This paper aims to evaluate some petrophysical relationships. On the other hand, both Wyllie and Raymer models were applied for porosity estimation from seismic velocity. It is worthy to mention that reservoir diagnosis of the Szolnok Formation was our target as well. Both the porosity and permeability variation range characterizing the detected lithologic facies of the Szolnok Formation are useful for reservoir zonation. The relationship between helium and mercury porosity for whole studied samples and sandstone samples as well, are supported by a high correlation coefficient and allow its application for prediction of porosity while it reduces costs and time of laboratory measurements. The evaluation of different calculated equations for porosity from compressional wave velocity data of the Szolnok Formation are studied and the relationship between velocity and porosity displays a clear inverse trend. The comparison between laboratory porosity and sonic

Deformation of evaporites near the Waste Isolation Pilot Plant (WIPP) site

International Nuclear Information System (INIS)

Borns, D.J.; Barrows, L.J.; Powers, D.W.; Snyder, R.P.

1983-03-01

Layered evaporite units of Ochoan age in the Delaware Basin are 1000 m thick. They are divided into three stratigraphic units (listed in order of increasing age): the Rustler Formation, the Salado Formation, the Castile Formation. These units, especially the Castile, are deformed along portions of the margin of the Delaware Basin and in some areas internal to the basin. Hypotheses of origin of deformation considered are: gravity foundering; gravity sliding; gypsum dehydration; dissolution; and depositional variations. Gravity foundering and sliding are considered the most probable causes of deformation. However, no hypothesis adequately answers why the deformation has a limited areal distribution. A possible explanation would be areal variations in rock strength caused by variations of intergranular water content. Age and timing of deformation are also crucial. Standard stratigraphic arguments based on superposition may not apply to such a highly incompetent material as halite. Gravity foundering could have happened at any time since deposition including the present; gravity sliding would probably have occurred since basin tilting began in the Cenozoic. Deformation could be ongoing. However, the strain rates are such (10 - 16 s - 1 ) that deformation would progress slowly relative to the facility's time frame of 2.5 x 10 5 y. Deformation of Salado units would be minimal ( 4 to 10 6 y to develop. At these strain rates, fractures that connect the fractured anhydrites of the Castile with the middle Salado could not develop. Deformation should not directly jeopardize the facility over the next 2.5 x 10 5 y

Comparison of Different Machine Learning Algorithms for Lithological Mapping Using Remote Sensing Data and Morphological Features: A Case Study in Kurdistan Region, NE Iraq

Science.gov (United States)

Othman, Arsalan; Gloaguen, Richard

2015-04-01

Topographic effects and complex vegetation cover hinder lithology classification in mountain regions based not only in field, but also in reflectance remote sensing data. The area of interest "Bardi-Zard" is located in the NE of Iraq. It is part of the Zagros orogenic belt, where seven lithological units outcrop and is known for its chromite deposit. The aim of this study is to compare three machine learning algorithms (MLAs): Maximum Likelihood (ML), Support Vector Machines (SVM), and Random Forest (RF) in the context of a supervised lithology classification task using Advanced Space-borne Thermal Emission and Reflection radiometer (ASTER) satellite, its derived, spatial information (spatial coordinates) and geomorphic data. We emphasize the enhancement in remote sensing lithological mapping accuracy that arises from the integration of geomorphic features and spatial information (spatial coordinates) in classifications. This study identifies that RF is better than ML and SVM algorithms in almost the sixteen combination datasets, which were tested. The overall accuracy of the best dataset combination with the RF map for the all seven classes reach ~80% and the producer and user's accuracies are ~73.91% and 76.09% respectively while the kappa coefficient is ~0.76. TPI is more effective with SVM algorithm than an RF algorithm. This paper demonstrates that adding geomorphic indices such as TPI and spatial information in the dataset increases the lithological classification accuracy.

Catalog of borehole lithologic logs from the 600 Area, Hanford Site

International Nuclear Information System (INIS)

Fecht, K.R.; Lillie, J.T.

1982-03-01

Rockwell Hanford Operations (Rockwell) geoscientists are studying the Hanford Site subsurface environment to assure safe management operations, disposal, and storage of radioactive waste. As part of this effort, geoscientists have collected geotechnical data from about 3000 boreholes drilled on the Hanford Site since the early 1900s. These boreholes have been used for subsurface geologic, hydrologic, and engineering investigation, water supply, ground-water monitoring, and natural gas production. This report is a catalog of all obtainable (about 800) lithologic logs from boreholes in a portion of the Hanford Site known as the 600 Area

(U-Th)/He thermochronometric constraints on the late Miocene-Pliocene northern Cordillera Real, tectonic development of the northern Cordillera Real, tectonic development of the Interandean Depression, the Spikings, Ecuador.

Science.gov (United States)

Spikings, R. A.; Crowhurst, P. V.

2004-12-01

The low sensitivity of apatite fission track (AFT) thermochronometry at temperatures less than ˜60 °C suggests that AFT data sets from the Andean Cordilleras may have frequently failed to identify specific periods after 9 Ma when cooling rates were high. Forward modeling of (U-Th)/He apatite age data obtained from the juxtaposed Paleozoic-Mesozoic Alao, Loja, and Salado terranes in the northern Cordillera Real, Ecuador, has improved the resolution of previous AFT thermal histories for the past 9 My. The Alao and Loja terranes form a coherent, structural block that resided at temperatures greater than 70-80 °C until ˜3.3-2.8 Ma and then cooled rapidly to less than 40 °C at rates of >15 °C/My. Intraterrane variations in the cooling and exhumation histories in the Salado terrane suggest that nonterrane-bounding faults played a significant role during its Pliocene-Recent evolution. The Salado terrane preserves an older history that reveals elevated cooling rates during 22-19 and 18-15 Ma. Subsequently, the terrane cooled rapidly from greater than 90 °C to less than 40 °C during 11-8 and 5.5-3.5 Ma at rates of >8 °C/My. Vertical reactivation of the Llanganates fault, which separates the Salado and Loja terranes, during the Pliocene-Recent coincides with the main stages of formation of the juxtaposed Interandean Depression, which provides further constraints on the growth phases of the depression and the Cordillera.

INFLUENCE OF SEDIMENT SUPPLY, LITHOLOGY, AND WOOD DEBRIS ON THE DISTRIBUTION OF BEDROCK AND ALLUVIAL CHANNELS

Science.gov (United States)

Field surveys in the Willapa River basin, Washington State, indicate that the drainage area?channel slope threshold describing the distribution of bedrock and alluvial channels is influenced by the underlying lithology and that local variations in sediment supply can overwhelm ba...

Lithological history and ductile deformation: the lessons for long-term stability of large-scales structures in the olkiluoto

International Nuclear Information System (INIS)

Wikstrom, L.; Aaltonen, I.; Mattila, J.

2009-01-01

The Olkiluoto site has been chosen as a repository site for the high-level nuclear waste in 2001. Investigations in the site have been ongoing since 1987. The basic idea in the crystalline nuclear waste site still is that the solid repository block surrounded by deformation zones can host a safe repository. It is impossible to say that neither the major ductile nor large-scale brittle deformation zones are stable, but it is possible to say that the tectonic processes have been active in a stable way for billions of years by reactivating the old features time after time and there are no signs of new large features formed in the vicinity of the site during the present time including post-glacial period. Understanding the geological history, especially the ductile deformation and over thrusting, begins from the understanding of the lithological features, mainly rock types, in the island. Vice versa, the occurrence and location of the lithological features are interpreted according to ductile deformation. In addition, you cannot study only present brittle deformation but you need to understand also older ductile and lithological features to be able to understand why these brittle features are where they are and to be able to predict them. (authors)

Investigation of the structure and lithology of bedrock concealed by basin fill, using ground-based magnetic-field-profile data acquired in the San Rafael Basin, southeastern Arizona

Science.gov (United States)

Bultman, Mark W.

2013-01-01

Data on the Earth’s total-intensity magnetic field acquired near ground level and at measurement intervals as small as 1 m include information on the spatial distribution of nearsurface magnetic dipoles that in many cases are unique to a specific lithology. Such spatial information is expressed in the texture (physical appearance or characteristics) of the data at scales of hundreds of meters to kilometers. These magnetic textures are characterized by several descriptive statistics, their power spectrum, and their multifractal spectrum. On the basis of a graphical comparison and textural characterization, ground-based magnetic-field profile data can be used to estimate bedrock lithology concealed by as much as 100 m of basin fill in some cases, information that is especially important in assessing and exploring for concealed mineral deposits. I demonstrate that multifractal spectra of ground-based magnetic-field-profile data can be used to differentiate exposed lithologies and that the shape and position of the multifractal spectrum of the ground-based magnetic-field-profile of concealed lithologies can be matched to the upward-continued multifractal spectrum of an exposed lithology to help distinguish the concealed lithology. In addition, ground-based magnetic-field-profile data also detect minute differences in the magnetic susceptibility of rocks over small horizontal and vertical distances and so can be used for precise modeling of bedrock geometry and structure, even when that bedrock is concealed by 100 m or more of nonmagnetic basin fill. Such data contain valuable geologic information on the bedrock concealed by basin fill that may not be so visible in aeromagnetic data, including areas of hydrothermal alteration, faults, and other bedrock structures. Interpretation of these data in the San Rafael Basin, southeastern Arizona, has yielded results for estimating concealed lithologies, concealed structural geology, and a concealed potential mineral

Lithology, hydrologic characteristics, and water quality of the Arkansas River Valley alluvial aquifer in the vicinity of Van Buren, Arkansas

Science.gov (United States)

Kresse, Timothy M.; Westerman, Drew A.; Hart, Rheannon M.

2015-01-01

A study to assess the potential of the Arkansas River Valley alluvial aquifer in the vicinity of Van Buren, Arkansas, as a viable source of public-supply water was conducted by the U.S. Geological Survey in cooperation with the Little Rock, District, U.S. Army Corps of Engineers. An important study component was to identify possible changes in hydrologic conditions following installation of James W. Trimble Lock and Dam 13 (December 1969) on the Arkansas River near the study area. Data were gathered for the study in regard to the lithology, hydrologic characteristics, and water quality of the aquifer. Lithologic information was obtained from drillers’ logs of wells drilled from 1957 through 1959. Water-quality samples were collected from 10 irrigation wells and analyzed for inorganic constituents and pesticides. To evaluate the potential viability of the alluvial aquifer in the Van Buren area, these data were compared to similar stratigraphic, lithologic, and groundwater-quality data from the Arkansas River Valley alluvial aquifer at Dardanelle, Ark., where the aquifer provides a proven, productive, sole-source of public-supply water.

Origin of marls from the Polish Outer Carpathians: lithological and sedimentological aspects

Science.gov (United States)

Górniak, Katarzyna

2012-10-01

Outcrops of marls, occurring within the sandstone-shaly flysch deposits of the Polish part of Outer Carpathians, considered to be locus typicus of these rocks, were described, measured and sampled. Lithologic features of marls, representing 15 complexes of different age and occurring in 15 complexes of various tectonic units, are presented (Fig. 1, 2). The present studies were concerning Jurassic marls from the Silesian Unit (Goleszów Marls), Upper Cretaceous marls from the Skole and Sub-Silesian Units (Siliceous-Fucoid and Węgierka Marls and Węglowka, Frydek, Jasienica and Zegocina Marls respectively), and Eocene-Oligocene marls from the Magura, Fore-Magura and Skole Units (Łącko, Zembrzyce, Budzów, Leluchów and Niwa, as well as Grybów and Sub-Cergowa and Dynów Marls respectively). The former opinions on lithology, age, formal subdivision, sedimentation conditions and genesis of these rocks are discussed (Table 1, 2; Fig. 1). Detailed description of the above mentioned marl-bearing complexes are presented and for each of them the typical lithological features are determined (Tables 3 - 20). The results of profiling are presented against the background of geological studies of the Carpathian marls. The results of lithologic studies are compared to form a classification scheme and are used as the basis of distinguishing genetic types of marls. Moreover, the interpretation of the conditions of sedimentation of these rocks is presented. According to the present author’s studies, in the outcrops of marls considered to be locus typicus of the above mentioned rocks, there are both monolithic and polylithic complexes exposed. The polylithic complexes contain apart from marls intercalations of arenaceous-shaly flysch (Table 19). Event sedimentation of marly facies, appearing at different times and in various parts of the Carpathian basin is the result of periodically repeating conditions favouring the sedimentation of marls. Carpathian marls seem to be

Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia

Science.gov (United States)

Ghaheri, Samira; Suhaili, Mohd; Sapari, Nasiman; Momeni, Mohammadsadegh

2017-12-01

Kudat Formation originated from deep marine environment. Three lithofacies association of deep marine turbidity channel was discovered in three Members of the Kudat Formation in Kudat Peninsula, Sabah, Malaysia. Turbidite and deep marine architecture elements was described based on detailed sedimentological studies. Four architecture elements were identified based on each facies association and their lithology properties and character: inner external levee that was formed by turbidity flows spill out from their confinement of channel belt; Lobes sheet that was formed during downslope debris flows associated with levee; Channel fill which sediments deposited from high to low density currents with different value of sediment concentration; and overbank terrace which was formed by rapid suspension sedimentation. The depositional environment of Kudat Formation is shelf to deep marine fan.

Sensitivity of the hypsometric integral (HI and its connections with lithology and neotectonics in the Rodna Mountains, Romanian Carpathians

Directory of Open Access Journals (Sweden)

Andrei ZAMOSTEANU

2015-10-01

Full Text Available This study investigates the sensitivity of the hypsometric integral (HI and its connections with lithology and neotectonics from northern Romanian Carpathians, Rodna Mountains. Two types of DEM was used in analysis (a 30m DEM resolution with specific grid size and a non-gridded 30m DEM resolution. Several methods have been applied in order to calculate HI as: the CalHypso GIS extension was used to automatically extract multiple hypsometric curves from digital elevation model (DEM and to calculate the main statistics related to the HI by applying polynomial fits; local indices of spatial autocorrelation were applied using Anselin Local Moran’s I and Getis-Ord Gi* in order to see if HI distribution has spatial patterns values and selection of valid squares (500m2 grid using 30m DEM using ArcMap 10.1 for the lithological analysis. The values of the hypsometric kurtosis density, kurtosis, skew and density skew are increasing eastwards. Values of hypsometric skewness for the northern slope are in range between 0.290 – 0.816 and sowthern part between 0.414 – 0.507. The results show that HI values are higher than 0.5 in the areas with recent tectonic influences especially in northern part near Dragoş Vodă fault system. The formations with a Oligocene, Miocene, Pleistocene and Holocene age have low values (<0.5 wile the other ones from Precambrian, Cambrian, Silurian, Eocene, Miocene and Pliocene age have higher values (>0.5. Comparing HI values from these two analysis (500m grid size DEM and the DEM without grid size of the DEM we find some slightly differences in HI values specially in the northern part of the range on Repedea, Negoiescu Mare, Fântâna and Lala basins

Lithological classification assisted by the joint inversion of electrical and seismic data at a control site in northeast Mexico

Science.gov (United States)

Infante, Victor; Gallardo, Luis A.; Montalvo-Arrieta, Juan C.; Navarro de León, Ignacio

2010-02-01

In this paper, evidence is presented that the combination of geospectral images and geophysical signatures (resistivity-velocity cross-plots) is a good tool to provide a natural visualization of the distribution and variations of lithological features in a test site. This was confirmed by the correlation between the electrical resistivity and seismic velocity values obtained after cross-gradient joint inversion at two profiles and geotechnical information provided by shallow boreholes in a site located in the Earth Sciences School grounds in Linares, Northeastern Mexico. The results obtained from this study show how the cross-gradient joint inversion facilitates the analysis of hydrological estimates and assists in lithological classification of subsurface materials.

Porosity, single-phase permeability, and capillary pressure data from preliminary laboratory experiments on selected samples from Marker Bed 139 at the Waste Isolation Pilot Plant. Volume 1 of 3: Main report, appendix A

Energy Technology Data Exchange (ETDEWEB)

Howarth, S.M.; Christian-Frear, T.

1997-08-01

Three groups of core samples from Marker Bed 139 of the Salado Formation at the Waste Isolation Pilot Plant (WIPP) were analyzed to provide data to support the development of numerical models used to predict the long-term hydrologic and structural response of the WIPP repository. These laboratory experiments, part of the FY93 Experimental Scoping Activities of the Salado Two-Phase Flow Laboratory Program, were designed to (1) generate WIPP-specific porosity and single-phase permeability data, (2) provide information needed to design and implement planned tests to measure two-phase flow properties, including threshold pressure, capillary pressure, and relative permeability, and (3) evaluate the suitability of using analog correlations for the Salado Formation to assess the long-term performance of the WIPP. This report contains a description of the boreholes core samples, the core preparation techniques used, sample sizes, testing procedures, test conditions, and results of porosity and single-phase permeability tests performed at three laboratories: TerraTek, Inc. (Salt Lake City, UT), RE/SPEC, Inc. (Rapid City, SD), and Core Laboratories-Special Core Analysis Laboratory (Carrollton, TX) for Rock Physics Associates. In addition, this report contains the only WIPP-specific two-phase-flow capillary-pressure data for twelve core samples. The WIPP-specific data generated in this laboratory study and in WIPP field-test programs and information from suitable analogs will form the basis for specification of single- and two-phase flow parameters for anhydrite markers beds for WIPP performance assessment calculations.

Porosity, single-phase permeability, and capillary pressure data from preliminary laboratory experiments on selected samples from Marker Bed 139 at the Waste Isolation Pilot Plant. Volume 1 of 3: Main report, appendix A

International Nuclear Information System (INIS)

Howarth, S.M.; Christian-Frear, T.

1997-08-01

Three groups of core samples from Marker Bed 139 of the Salado Formation at the Waste Isolation Pilot Plant (WIPP) were analyzed to provide data to support the development of numerical models used to predict the long-term hydrologic and structural response of the WIPP repository. These laboratory experiments, part of the FY93 Experimental Scoping Activities of the Salado Two-Phase Flow Laboratory Program, were designed to (1) generate WIPP-specific porosity and single-phase permeability data, (2) provide information needed to design and implement planned tests to measure two-phase flow properties, including threshold pressure, capillary pressure, and relative permeability, and (3) evaluate the suitability of using analog correlations for the Salado Formation to assess the long-term performance of the WIPP. This report contains a description of the boreholes core samples, the core preparation techniques used, sample sizes, testing procedures, test conditions, and results of porosity and single-phase permeability tests performed at three laboratories: TerraTek, Inc. (Salt Lake City, UT), RE/SPEC, Inc. (Rapid City, SD), and Core Laboratories-Special Core Analysis Laboratory (Carrollton, TX) for Rock Physics Associates. In addition, this report contains the only WIPP-specific two-phase-flow capillary-pressure data for twelve core samples. The WIPP-specific data generated in this laboratory study and in WIPP field-test programs and information from suitable analogs will form the basis for specification of single- and two-phase flow parameters for anhydrite markers beds for WIPP performance assessment calculations

Contingency table analysis of pebble lithology and roundness: A case study of Huangshui River, China and comparison to rivers in the Rocky Mountains, USA

Science.gov (United States)

Miao, X.; Lindsey, D.A.; Lai, Z.; Liu, Xiuying

2010-01-01

Contingency table analysis of pebble lithology and roundness is an effective way to identify the source terrane of a drainage basin and to distinguish changes in basin size, piracy, tectonism, and other events. First, the analysis to terrace gravel deposited by the Huangshui River, northeastern Tibet Plateau, China, shows statistically contrasting pebble populations for the oldest terrace (T7, Dadongling, 1.2. Ma) and the youngest terraces (T0-T3, ?. 0.15. Ma). Two fluvial processes are considered to explain the contrast in correlation between lithology and roundness in T7 gravel versus T0-T3 gravel: 1) reworking of T7 gravel into T0-T3 gravel and 2) growth in the size of the river basin between T7 and T0-T3 times. We favor growth in basin size as the dominant process, from comparison of pebble counts and contingency tables. Second, comparison of results from Huangshui River of China to three piedmont streams of the Rocky Mountains, USA highlights major differences in source terrane and history. Like Rocky Mountain piedmont gravel from Colorado examples, the Huangshui gravels show a preference (observed versus expected frequency) for rounded granite. But unlike Rocky Mountain gravel, Huangshui gravel shows a preference for angular quartzite and for rounded sandstone. In conclusion, contrasting behavior of lithologies during transport, not always apparent in raw pebble counts, is readily analyzed using contingency tables to identify the provenance of individual lithologies, including recycled clasts. Results of the analysis may help unravel river history, including changes in basin size and lithology. ?? 2009.

Anatomy of a mountain: The Thebes Limestone Formation (Lower Eocene) at Gebel Gurnah, Luxor, Nile Valley, Upper Egypt

Science.gov (United States)

King, Christopher; Dupuis, Christian; Aubry, Marie-Pierre; Berggren, William A.; Knox, Robert O.'B.; Galal, Wael Fathi; Baele, Jean-Marc

2017-12-01

We present a detailed geologic study of the Thebes Formation at Gebel Gurnah in its locus typicus on the West Bank (opposite Luxor) of the Nile River in the Upper Nile Valley, Egypt. This is the first detailed measurement and lithologic description of the ∼340 m thick (predominantly) carbonate section. The Thebes Formation is divided into thirteen major lithic units (A to M). We interpret data on the lithologic succession and variations, whole rock/clay mineralogy, and macro/micropaleontology in terms of deposition on a shallow carbonate platform episodically influenced by continental runoff, and describe six depositional sequences that we place in the global framework of Lower Eocene (Ypresian) sequence stratigraphy. We note however significant incompatibilities between the Thebes depositional sequences and the global sequences. We emend the definition of the Thebes Formation by defining its top as corresponding to level 326 m at the top of Nodular Limestone 'L' (NLL), and assigning the overlying beds to the Minia Limestone Formation. New biostratigraphic data and revision of previous studies establish the direct assignment of the Thebes Formation to planktonic foraminiferal Zones E4/P6b (upper part), E5/P7 and (indirectly) Zone E6/P8, and (probably, indirectly) Zone E7a/;P9;, and to calcareous nannofossil Zone NP12 and lower Zone NP13 of the Lower Eocene (Ypresian) and provide a temporal framework spanning ∼ 2.8 Myr from towards the end of the Early Eocene. Dominantly carbonate deposition, with a strongly reduced detrital influx, occurred on a very wide shelf (probably) at least ∼ 100 km from the coastline. The thick sedimentary succession and the marked vertical lithologic variations are interpreted as resulting from sea level fluctuations imprinted on a long-term decrease in sea-level associated with rapid subsidence reflecting tectonic relaxation after the major Late Paleocene tectonic reorganization of the Syrian Arc.

Lithological and fluvial controls on the geomorphology of tropical montane stream channels in Puerto Rico

Science.gov (United States)

Andrew S. Pike; F.N. Scatena; Ellen E. Wohl

2010-01-01

An extensive survey and topographic analysis of fi ve watersheds draining the Luquillo Mountains in north-eastern Puerto Rico was conducted to decouple the relative infl uences of lithologic and hydraulic forces in shaping the morphology of tropical montane stream channels. The Luquillo Mountains are a steep landscape composed of volcaniclastic and igneous rocks that...

Biostratigraphy of the Garau Formation in Naft well subsurface stratigraphic section, South Kermanshah

Directory of Open Access Journals (Sweden)

Y., Ezampanah,

2012-01-01

Full Text Available In order to biostratigraphy of the Garau Formation in the centeral Lurestan, one subsurface section (Naft well in Naft anticline, south Kermanshah was selected and studied. The drilled thickness of the Garau Formation in this section is up to 485 meters and lithologically composed of argillaceous limestones and dark gray marls. In this research 1150 thin sections of subsurface Naft well section were studied. In biostratigraphic studies of the Garau Formation in study section 61 species belong to 17 genera of planktonic foraminifera were recognized and 9 biozones were identified. Based on distribution of fossils and biozones identificated, the age of the Garau Formation in drilled part of the subsurface Naft well section is Early Aptian to Early Cenomanian.

Latest Paleocene lithologic and biotic events in neritic deposits of southwestern New Jersey

Science.gov (United States)

Gibson, Thomas G.; Bybell, Laurel M.; Owens, James P.

1993-01-01

In the southwestern New Jersey Coastal Plain, four drill holes contain continuous neritic sedimentation across the Paleocene/Eocene boundary (calcareous nannofossil Zone NP 9/NP 10 boundary). Significant lithologic and biotic changes occur in these strata near the top of the Paleocene. Global warming, increased precipitation, and other oceanographic and climatic events that have been recognized in high-latitude, deep-oceanic deposits of the latest Paleocene also influenced mid-latitude, shallow-marine, and terrestrial environments of the western North Atlantic. The diverse, well-preserved calcareous nannofossil flora that is present throughout the entire New Jersey boundary section accurately places these events within the uppermost part of the upper Paleocene Zone NP 9. Several rapid but gradational changes occur within a 1.1-m interval near the top of Zone NP 9. The changes include (1) a change in lithology from glauconitic quartz sand to clay, (2) a change in clay mineral suites from illite/smectite-dominated to kaolinite-dominated, (3) a change in benthic foraminiferal assemblages to a lower diversity fauna suggestive of low-oxygen environments, (4) a significant increase in planktonic foraminiferal abundance, and (5) an increased species turnover rate in marine calcareous nannofossils. Pollen was sparse in the New Jersey drill holes, but terrestrial sporomorph species in Virginia exhibit increased turnover rates at a correlative level. Foraminiferal assemblages and lithology indicate that relative sea level rose in New Jersey at the same time as these late Paleocene events occurred in late Biochron NP 9. The higher sea levels influenced sediment type and absolute abundance of planktonic foraminifers in the deposits. Above the initial increase of kaolinite in the upper part of Zone NP 9, the kaolinite percentage continues to increase, and the maximum kaolinite value occurs in the uppermost part of Zone NP 9. There are few changes in either the sediments or the

HCMM: Soil moisture in relation to geologic structure and lithology, northern California

Science.gov (United States)

Rich, E. I. (Principal Investigator)

1981-01-01

Some HCMM images of about 80,000 sq km in northern California were qualitatively evaluated for usefulness in regional geologic investigations of structure and lithology. The thermal characteristics recorded vary among the several geomorphic provinces and depends chiefly on the topographic expression and vegetation cover. Identification of rock types, or groups of rock types, was most successfully carried out within the semi-arid parts of the region; however, extensive features, such as faults, folds and volcanic fields could be delineated. Comparisons of seasonally obtained HCMM images were limited value, except in semi-arid regions.

Lithology and mineralogy recognition from geochemical logging tool data using multivariate statistical analysis.

Science.gov (United States)

Konaté, Ahmed Amara; Ma, Huolin; Pan, Heping; Qin, Zhen; Ahmed, Hafizullah Abba; Dembele, N'dji Dit Jacques

2017-10-01

The availability of a deep well that penetrates deep into the Ultra High Pressure (UHP) metamorphic rocks is unusual and consequently offers a unique chance to study the metamorphic rocks. One such borehole is located in the southern part of Donghai County in the Sulu UHP metamorphic belt of Eastern China, from the Chinese Continental Scientific Drilling Main hole. This study reports the results obtained from the analysis of oxide log data. A geochemical logging tool provides in situ, gamma ray spectroscopy measurements of major and trace elements in the borehole. Dry weight percent oxide concentration logs obtained for this study were SiO 2 , K 2 O, TiO 2 , H 2 O, CO 2 , Na 2 O, Fe 2 O 3 , FeO, CaO, MnO, MgO, P 2 O 5 and Al 2 O 3 . Cross plot and Principal Component Analysis methods were applied for lithology characterization and mineralogy description respectively. Cross plot analysis allows lithological variations to be characterized. Principal Component Analysis shows that the oxide logs can be summarized by two components related to the feldspar and hydrous minerals. This study has shown that geochemical logging tool data is accurate and adequate to be tremendously useful in UHP metamorphic rocks analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Lithological and seasonal variations in radon concentrations in Cypriot groundwaters

International Nuclear Information System (INIS)

Tasoula Kiliari; Anastasia Tsiaili; Ioannis Pashalidis

2010-01-01

The paper presents and discusses radon activity concentrations in Cypriot groundwater systems as a function of the background lithology and seasonal/meteorological conditions using an airborne radon monitoring system (ARM) after separation of radon by out-gassing. Radiometric analysis of groundwater samples obtained from non-contaminated systems showed that radon concentration in groundwaters varies strongly (0.1-10 Bq L -1 ) depending mainly on the hosting geological matrix but also to lesser degree on atmospheric/meteorological conditions. The associated excess annual dose has been estimated to range between 10 -6 and 10 -4 mSv y -1 , which is an insignificant contribution to the radiation exposure of the Cypriot population caused by airborne radon (0.5 ± 0.4 mSv y -1 ). (author)

Peculiar lithological structure features of a productive horizon of the Shatlyk gas deposit

International Nuclear Information System (INIS)

Gergedava, Sh.K.; Sokolova, T.F.; Friman, Yu.T.

1975-01-01

Investigation results on the lithologic heterogeneity of the productive horizon in the Shatlyk gas field are cited. The work was performed by a set of commercial and geophysical procedures involving the method of spontaneous polarization potentials, side electrical sounding with five probes, cavernometry, microsounding, side logging and radiometry (neutron gamma method and gamma method). The structural peculiarity of the Shatlyk horizon was shown to possibly lead to non-uniform movement of seam waters during drilling and to flooding of wells

Lithologic influences on groundwater recharge through incised glacial till from profile to regional scales: Evidence from glaciated Eastern Nebraska

Science.gov (United States)

Gates, John B.; Steele, Gregory V.; Nasta, Paolo; Szilagyi, Jozsef

2014-01-01

Variability in sediment hydraulic properties associated with landscape depositional and erosional features can influence groundwater recharge processes by affecting soil-water storage and transmission. This study considers recharge to aquifers underlying river-incised glaciated terrain where the distribution of clay-rich till is largely intact in upland locations but has been removed by alluvial erosion in stream valleys. In a stream-dissected glacial region in eastern Nebraska (Great Plains region of the United States), recharge estimates were developed for nested profile, aquifer, and regional scales using unsaturated zone profile measurements (matric potentials, Cl- and 3H), groundwater tracers (CFC-12 and SF6), and a remote sensing-assisted water balance model. Results show a consistent influence of till lithology on recharge rates across nested spatial scales despite substantial uncertainty in all recharge estimation methods, suggesting that minimal diffuse recharge occurs through upland glacial till lithology whereas diffuse recharge occurs in river valleys where till is locally absent. Diffuse recharge is estimated to account for a maximum of 61% of total recharge based on comparison of diffuse recharge estimated from the unsaturated zone (0-43 mm yr-1) and total recharge estimated from groundwater tracers (median 58 mm yr-1) and water balance modeling (median 56 mm yr-1). The results underscore the importance of lithologic controls on the distributions of both recharge rates and mechanisms.

The relationship between depositional system and ore-formation of sandstone-type uranium deposits in Dongsheng area, Ordos basin

International Nuclear Information System (INIS)

Zhao Honggang; Ou Guangxi

2006-01-01

The analysis on depositional system plays a very important role in studying sandstone-type uranium deposits. Based on depositional system analysis and sequence stratigraphy, and through the study of depositional system characteristics and the spatial distribution of sedimentary facies, the evolution of sedimentary environments as well as the sequence stratigraphy of Zhiluo Formation in Dongsheng area, Ordos basin, authors have come to the following conclusions, (1) the spatial distribution of sand bodies is controlled by the planar distribution of sedimentary facies, which, in turn, affects the spatial distribution of ore-hosting sand bodies; (2) the evolution of sedimentary facies and sedimentary environments creates good lithofacies and lithological conditions favorable for interlayer oxidation; (3) the spatial lithologic combination of 'three layer structure' is controlled by sedimentary sequence. (authors)

Lithology, monsoon and sea-surface current control on provenance, dispersal and deposition of sediments over the Andaman continental shelf

Digital Repository Service at National Institute of Oceanography (India)

Damodararao, K.; Singh, S.K.; Rai, V.K.; Ramaswamy, V.; Rao, P.S.

, constrain their transport pathways and assess the factors influencing the erosion in the catchment and their dispersal and deposition over the Andaman Shelf region. Major elemental compositions of the shelf sediments suggest mafic lithology...

Basic data report for drillhole WIPP 11 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1982-02-01

Seismic reflection data from petroleum industry sources showed anomalous reflectors in the Castile Formation over a small area about 3 miles north of the center of the Waste Isolation Pilot Plant (WIPP) site. Additional corroborative seismic reflection data were collected as part of WIPP investigations, and WIPP 11 was drilled to investigate the anomaly. WIPP 11 was drilled near the northwest corner of Section 9, T.22.S., R.31E. it penetrated, in descending order, sand dune deposits and the Gatuna Formation (29'), Santa Rosa Sandstone (132'), Dewey Lake Red Beds (502'), Rustler Formation (288'), Salado Formation (1379'), and most of the Castile Formation (1240'). Beds within the lower part of the Salado, and the upper anhydrite of the Castile, are thinner than normal; these beds are displaced upward structurally by the upper Castile halite which is highly thickened (about 968'). The lowest halite is thin (51') and the basal anhydrite was not completely penetrated. Subsequent seismic and borehole data has shown WIPP 11 to be in a structural complex now identified as the disturbed zone. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level waste, though there are no plans at this time to dispose of high level waste or spent fuel at WIPP

Results of a downhole formation microscanner study in a Juro-Triassic-aged sedimentary deposit (Passaic Formation)

International Nuclear Information System (INIS)

Fischer, J.A.; Fischer, J.J.; Bullwinkel, R.J.

1994-01-01

Studies to determine the structural and geohydrological properties of the Passaic Formation were performed at two sites. Both sites are located in northeastern New Jersey, within the Juro-Triassic-aged Newark Basin. The Passaic Formation rocks are described in the literature as a reddish brown, thin to massively bedded, sedimentary deposit with lithology ranging from claystone through conglomerate. A fractured open-quotes layer cakeclose quotes model has been proposed (and is generally accepted) to describe the prevailing geohydrological conditions. The Formation MicroScanner tool was used in four wells drilled for these projects (two at each site). In addition to this microresistivity tool, a suite of other oil field geophysical tools (Gamma, Induction, Dipmeter, Temperature, and Neutron probes) were also utilized. The data collected with the Formation MicroScanner were correlated with detailed logs and the continuous core retrieved from three of the wells. Pump test data was also obtained at both sites. The geophysical data obtained at both sites allowed the direct identification of fractures and their orientation in relation to bedding. Fracture and bedding aperture size and orientation were measured. The results, as presented in this paper, show a high degree of inhomogeneity at both sites rather than the conventional layer cake model. For appropriate site analyses it was necessary to significantly refine the previously assumed Passaic Formation geohydrological and structural model. 14 refs., 4 figs

Radon in soil gas: distributions and correlations with the lithologies and pedologies of RMBH - Metropolitan region of Belo Horizonte - Minas Gerais - Brazil

International Nuclear Information System (INIS)

Lara, Evelise G.; Santos, Talita de O.; Oliveira, Arno Heeren de

2013-01-01

The concentration of radon in the soil gas is an important indicator to predict the radon geologic potential, usually indicated by Geological Radon Potential - GEORP, which is defined as the percent number of dwellings with indoor air radon concentration above the U.S.EPA action limit. The objective of this work was to investigate the distribution of radon concentration in soil gas and its relation with the pedologies and lithologies in the RMBH. The radon concentrations in soil gas were determined by using an AlphaGUARD monitor at 150 measurement points over the lithologies and pedologies of the area. The concentrations 226 Ra were determined by gamma spectrometry (HPGe) and U and Th by ICP-MS. The permeabilities of the soil were determined by using the RADON-JOK permeameter. Regarding pedologies, the perferric Red Latosols had the highest concentrations, with arithmetic mean to 60.6 ± 8.7 kBq.m -3 . Regarding lithologies, areas where the bedrocks are predominantly schists and metagraywackes showed the highest radon concentrations, with arithmetic mean to 46.5 ± 9.9 kBq.m -3 . The areas of lithology or pedology, in which the average radon concentrations are the highest also exhibit higher GEORP, e.g. for the perferric Red Latosol pedology shows GEORP of 26,5%. In this pedology, over 50% of the measurement points shows radon concentrations above of 50.0 kBq.m -3 , that, by the 'Swedish Criteria' classifies the area as high radon risk. The correlation with GEORP is even more significant when the radon concentration in soil gas is combined with soil permeability, through the Soil Radon Index indicator. (author)

Radon in soil gas: distributions and correlations with the lithologies and pedologies of RMBH - Metropolitan region of Belo Horizonte - Minas Gerais - Brazil

Energy Technology Data Exchange (ETDEWEB)

Lara, Evelise G.; Santos, Talita de O.; Oliveira, Arno Heeren de, E-mail: evelise.lara@gmail.com, E-mail: talitaolsantos@yahoo.com.br, E-mail: heeren@nuclear.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, M.G (Brazil). Dept. de Engenharia Nuclear; Rocha, Zildete; Palmieri, Helena E. Leonhardt; Brito, Walter de; Araujo, Gabriela Bastos D. de, E-mail: rochaz@cdtn.br, E-mail: help@cdtn.br, E-mail: britow@cdtn.br, E-mail: gabibastosdias@hotmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2013-07-01

The concentration of radon in the soil gas is an important indicator to predict the radon geologic potential, usually indicated by Geological Radon Potential - GEORP, which is defined as the percent number of dwellings with indoor air radon concentration above the U.S.EPA action limit. The objective of this work was to investigate the distribution of radon concentration in soil gas and its relation with the pedologies and lithologies in the RMBH. The radon concentrations in soil gas were determined by using an AlphaGUARD monitor at 150 measurement points over the lithologies and pedologies of the area. The concentrations {sup 226}Ra were determined by gamma spectrometry (HPGe) and U and Th by ICP-MS. The permeabilities of the soil were determined by using the RADON-JOK permeameter. Regarding pedologies, the perferric Red Latosols had the highest concentrations, with arithmetic mean to 60.6 ± 8.7 kBq.m{sup -3}. Regarding lithologies, areas where the bedrocks are predominantly schists and metagraywackes showed the highest radon concentrations, with arithmetic mean to 46.5 ± 9.9 kBq.m{sup -3}. The areas of lithology or pedology, in which the average radon concentrations are the highest also exhibit higher GEORP, e.g. for the perferric Red Latosol pedology shows GEORP of 26,5%. In this pedology, over 50% of the measurement points shows radon concentrations above of 50.0 kBq.m{sup -3}, that, by the 'Swedish Criteria' classifies the area as high radon risk. The correlation with GEORP is even more significant when the radon concentration in soil gas is combined with soil permeability, through the Soil Radon Index indicator. (author)

Origin and chemical composition of evaporite deposits

Science.gov (United States)

Moore, George William

1960-01-01

A comparative study of marine evaporite deposits forming at the present time along the pacific coast of central Mexico and evaporite formations of Permian age in West Texas Basin was made in order to determine if the modern sediments provide a basis for understanding environmental conditions that existed during deposition of the older deposits. The field work was supplemented by investigations of artificial evaporite minerals precipitated in the laboratory and by study of the chemical composition of halite rock of different geologic ages. The environment of deposition of contemporaneous marine salt deposits in Mexico is acidic, is strongly reducing a few centimeters below the surface, and teems with microscopic life. Deposition of salt, unlike that of many other sediments, is not wholly a constructional phenomenon. Permanent deposits result only if a favorable balance exists between deposition in the dry season and dissolution in the wet season. Evaporite formations chosen for special study in the West Texas Basin are, in ascending order, the Castile, Salado, and Rustler formations, which have a combined thickness of 1200 meters. The Castile formation is largely composed of gypsum rock, the Salado, halite rock, and the Rustler, quartz and carbonate sandstone. The lower part of the Castile formation is bituminous and contains limestone laminae. The Castile and Rustler formations thicken to the south at the expense of salt of the intervening Salado formation. The clastic rocks of the Rustler formation are interpreted as the deposits of a series of barrier islands north of which halite rock of the Salado was deposited. The salt is believed to have formed in shallow water of uniform density that was mixed by the wind. Where water depth exceeded the depth of the wind mixing, density stratification developed, and gypsum was deposited. Dense water of high salinity below the density discontinuity was overlain by less dense, more normally saline water which was derived from

HCMM: Soil moisture in relation to geologic structure and lithology, northern California. [Sacremento Valley

Science.gov (United States)

Rich, E. I. (Principal Investigator)

1979-01-01

The author has identified the following significant results. A preliminary analysis of the HCMM imagery of the project area indicated that locally some differentiation of lithologic units within the Northern Coast Range may be possible. Of significance, however, was a thermally cool linear area that appeared on the 30 May 1978 Nite-IR. This linear feature seemed to coincide with the Bear Mt. Fault and with the axis of the Chico Monocline along the eastern margin of the Sacramento Valley.

Enhancement of Jahani (Firouzabad salt dome lithological units, using principal components analysis

Directory of Open Access Journals (Sweden)

Houshang Pourcaseb

2016-04-01

Full Text Available In this study, principal components analysis was used to investigate lithological characteristics of Jahani salt dome, Firouzabad. The spectral curves of rocks in the study area show that the evaporate rocks have the highest reflectance at specified wavelengths. The highest reflection has been seen in gypsum and white salt, while minimal reflection can be observed in the igneous rocks from the region. The results show that PCs have significantly low information. It is clear that PC1 shows more information in the highest variance while PC2 has less information. Regional geological map and field controls show compatibility between the enhanced zones and outcrops in the field.

Characterization and 3D reservoir modelling of fluvial sandstones of the Williams Fork Formation, Rulison Field, Piceance Basin, Colorado, USA

International Nuclear Information System (INIS)

Pranter, Matthew J; Vargas, Marielis F; Davis, Thomas L

2008-01-01

This study describes the stratigraphic characteristics and distribution of fluvial deposits of the Upper Cretaceous Williams Fork Formation in a portion of Rulison Field and addresses 3D geologic modelling of reservoir sand bodies and their associated connectivity. Fluvial deposits include isolated and stacked point-bar deposits, crevasse splays and overbank (floodplain) mudrock. Within the Williams Fork Formation, the distribution and connectivity of fluvial sandstones significantly impact reservoir productivity and ultimate recovery. The reservoir sandstones are primarily fluvial point-bar deposits interbedded with shales and coals. Because of the lenticular geometry and limited lateral extent of the reservoir sandstones (common apparent widths of ∼500–1000 ft; ∼150–300 m), relatively high well densities (e.g. 10 acre (660 ft; 200 m) spacing) are often required to deplete the reservoir. Heterogeneity of these fluvial deposits includes larger scale stratigraphic variability associated with vertical stacking patterns and structural heterogeneities associated with faults that exhibit lateral and reverse offsets. The discontinuous character of the fluvial sandstones and lack of distinct marker beds in the middle and upper parts of the Williams Fork Formation make correlation between wells tenuous, even at a 10 acre well spacing. Some intervals of thicker and amalgamated sandstones within the middle and upper Williams Fork Formation can be correlated across greater distances. To aid correlation and for 3D reservoir modelling, vertical lithology proportion curves were used to estimate stratigraphic trends and define the stratigraphic zonation within the reservoir interval. Object-based and indicator-based modelling methods have been applied to the same data and results from the models were compared. Results from the 3D modelling indicate that sandstone connectivity increases with net-to-gross ratio and, at lower net-to-gross ratios (<30%), differences exist in

Recent developments in the conceptual geologic and hydrologic understanding of the WIPP site, Southeastern New Mexico

International Nuclear Information System (INIS)

Lappin, A.R.

1987-01-01

Hydrologic and geochemical characterization of the WIPP site has progressed significantly since the 1980 WIPP Final Environmental Impact Statement. In 1980, the entire Rustler Formation was modeled as a single hydrologic unit, assumed to be isotropic, single-porosity, and completely confined. Variability within the Rustler was evaluated only on the basis of testing at individual wells. In the 1983 WIPP Site and Preliminary Design Validation effort, the Salado Formation, in which the WIPP facility is being constructed, was assumed to be anhydrous, except for fluid inclusions and mineralogically bound water. Recent hydrologic and tracer testing at the WIPP indicates: 1) The local importance of dual-porosity behavior in hydraulic response and transport in parts of the Culebra Dolomite Member of the Rustler Formation; 2) the presence of distinct high- and low-transmissivity regions within the Culebra; and 3) the possible importance of vertical fluid flow within the Rustler. Recent analyses indicate that fluids encountered in the WIPP facility and in experimental brine-migration studies are grain-boundary fluids, chemically distinct from fluid inclusions. Fluid-inclination compositions appear to have been determined shortly after the halite deposition. Because of the times required for diagenetic reactions controlling their compositions, the grain-boundary fluids within the Salado probably have a residence time of several million years

Evaluation of tectonic impact on radon level of lithological units

International Nuclear Information System (INIS)

Wolkowicz, S.; Strzelecki, R.

2000-01-01

The radon potential maps of the Sudetes Mountains and Upper Silesian Coal Basin have been prepared on a base of arithmetic mean value of radon concentration in soil air in distinguished lithological/stratigraphic units. Both zones of shallow position of ground table and the fault zones influence value of this parameter: the first one affects in specific conditions lowering of background values, the second ones - origin of values several and teen times higher than rock background values. Estimation of power of tectonic influence on general radon potential of the lithological units has been made on a base of examination of histograms of distribution of radon concentration in soil air. In the Sudetes area, 0 % to about 30 % of the measurements is related to fault zones. Higher tectonic engagement (about 30 %) characterizes the Karkonosze Granites, Izera Gneisses and Strzegom Granites. In the cases of Karkonosze Granites and the Strzegom Granites, rock background values concentrations in soil air are a little than 50 kBq/m 3 , what is the value defined for lower threshold of high radon risk areas. In conclusion, presence of numerous fault zones and fissures increases radon risk category with one class. Background modal values of radon emanations, defined for the studied units, in the 5 cases fulfill criteria for medium radon risk areas, and in other cases do not exceed of the threshold 10 kBq/m 3 . It displays, that in the case of low radon potential rocks only a few-percent rich population of measurements related to tectonic zones, is sufficient to substantially deform of the image of the studied unit radon potential. For instance, medium radon potential characterizes the Klodzko - Zloty Stok Granites (the arithmetic mean value of this class is 36.15 kBq/m 3 , n=104) and small tectonic engagement (about 3.8 %). In the result the modal value belongs to the class 20-30 kBq/m 3 . The Poreba Beds in the Upper Silesian Coal Basin are characterised by almost the same radon

Application of cluster and discriminant analyses to diagnose lithological heterogeneity of the parent material according to its particle-size distribution

Science.gov (United States)

Giniyatullin, K. G.; Valeeva, A. A.; Smirnova, E. V.

2017-08-01

Particle-size distribution in soddy-podzolic and light gray forest soils of the Botanical Garden of Kazan Federal University has been studied. The cluster analysis of data on the samples from genetic soil horizons attests to the lithological heterogeneity of the profiles of all the studied soils. It is probable that they are developed from the two-layered sediments with the upper colluvial layer underlain by the alluvial layer. According to the discriminant analysis, the major contribution to the discrimination of colluvial and alluvial layers is that of the fraction >0.25 mm. The results of canonical analysis show that there is only one significant discriminant function that separates alluvial and colluvial sediments on the investigated territory. The discriminant function correlates with the contents of fractions 0.05-0.01, 0.25-0.05, and >0.25 mm. Classification functions making it possible to distinguish between alluvial and colluvial sediments have been calculated. Statistical assessment of particle-size distribution data obtained for the plow horizons on ten plowed fields within the garden indicates that this horizon is formed from colluvial sediments. We conclude that the contents of separate fractions and their ratios cannot be used as a universal criterion of the lithological heterogeneity. However, adequate combination of the cluster and discriminant analyses makes it possible to give a comprehensive assessment of the lithology of soil samples from data on the contents of sand and silt fractions, which considerably increases the information value and reliability of the results.

Biostratigraphy of the Gurpi Formation in Zagros Basin, Iran

Directory of Open Access Journals (Sweden)

2015-10-01

Full Text Available Introdaction   The Gurpi Formation is developed in the central of the Zagros fold in Khuzestan, Lorestan and Fars provinces of southwestern Iran, defined az theZagros basin ,The Gurpi refers to Gurpi Mountain in the Kuzestan province.type section gurpi,which is N of the Lali oil wells and N-E of Masjed – Soleiman city,comprises 320m argillaceous limestone and gry-to-blueshale marl(James and Wynd,1965Although the boundary the Gurpi Formation and the underlying Ilam Formation is reported to be gradual,the altered facies found at this boundrary could be a sign of a low disconformity or even unconformity.In some place,the Ilam Formation does not exist and tne Gurpi Formation lie abave the Sarvak Formation.The upper boundry of the Gurpi Formation is more noticeable and there are different overlying formations.In Khozstan province,the Gurpi Formation is overlain by purplr shale of pabdeh Formation with signs of unconformity.The Gurpi Formation is not always concurrent. Biostratigraphy and lithological characteries of the Gurpi Formation were studied by James and Wynd (1965, Taheri (1998, KameliAzao (2002, Zarei (2005, Hematinasab (2008, Madavian (2009, Tavalaian (2011. This research study aims at describing the biostratigraphy of Gurpi Formation.In this study five stratigraphic section is investigate for its Planktonc Foraminiforal content.     Method and Matrials   This study involves five stratigraphic sections from the Gurpi Formation that were measured the ticknes and determind of Litostratigrapic limit as well as recognizd of detail litostrstigray the Gurpi Formation.More than 525 thine sections were examined. Some samples from the underlying Pabdeh Formation were also analysed for comparison. then recognizd Genus and species of Planktonic foraminifera and biozones mentioned wells have been introduced. In order to the biozonation of Gurpi Formation, stratigraphic distribution of well- known foraminifora is recognizd and then biozones are

Biostratigraphy of the Gurpi Formation in Zagros Basin, Iran

Directory of Open Access Journals (Sweden)

Abbas Sadeghi

2015-09-01

Full Text Available   Introdaction   The Gurpi Formation is developed in the central of the Zagros fold in Khuzestan, Lorestan and Fars provinces of southwestern Iran, defined az theZagros basin ,The Gurpi refers to Gurpi Mountain in the Kuzestan province.type section gurpi,which is N of the Lali oil wells and N-E of Masjed – Soleiman city,comprises 320m argillaceous limestone and gry-to-blueshale marl(James and Wynd,1965Although the boundary the Gurpi Formation and the underlying Ilam Formation is reported to be gradual,the altered facies found at this boundrary could be a sign of a low disconformity or even unconformity.In some place,the Ilam Formation does not exist and tne Gurpi Formation lie abave the Sarvak Formation.The upper boundry of the Gurpi Formation is more noticeable and there are different overlying formations.In Khozstan province,the Gurpi Formation is overlain by purplr shale of pabdeh Formation with signs of unconformity.The Gurpi Formation is not always concurrent. Biostratigraphy and lithological characteries of the Gurpi Formation were studied by James and Wynd (1965, Taheri (1998, KameliAzao (2002, Zarei (2005, Hematinasab (2008, Madavian (2009, Tavalaian (2011. This research study aims at describing the biostratigraphy of Gurpi Formation.In this study five stratigraphic section is investigate for its Planktonc Foraminiforal content.     Method and Matrials   This study involves five stratigraphic sections from the Gurpi Formation that were measured the ticknes and determind of Litostratigrapic limit as well as recognizd of detail litostrstigray the Gurpi Formation.More than 525 thine sections were examined. Some samples from the underlying Pabdeh Formation were also analysed for comparison. then recognizd Genus and species of Planktonic foraminifera and biozones mentioned wells have been introduced. In order to the biozonation of Gurpi Formation, stratigraphic distribution of well- known foraminifora is recognizd and

Characteristics of Methane Hydrate Formation in Artificial and Natural Media

Directory of Open Access Journals (Sweden)

Qingbai Wu

2013-03-01

Full Text Available The formation of methane hydrate in two significantly different media was investigated, using silica gel as an artificial medium and loess as a natural medium. The methane hydrate formation was observed through the depletion of water in the matrix, measured via the matrix potential and the relationship between the matrix potential and the water content was determined using established equations. The velocity of methane hydrate nucleation slowed over the course of the reaction, as it relied on water transfer to the hydrate surfaces with lower Gibbs free energy after nucleation. Significant differences in the reactions in the two types of media arose from differences in the water retention capacity and lithology of media due to the internal surface area and pore size distributions. Compared with methane hydrate formation in silica gel, the reaction in loess was much slower and formed far less methane hydrate. The results of this study will advance the understanding of how the properties of the environment affect the formation of gas hydrates in nature.

Airborne EM, Lithology and in-situ Data Used for Quantizing Groundwater Salinity in Zeeland (NL)

Science.gov (United States)

Meyer, U.; Siemon, B.; van Baaren, E.; Dabekaussen, W.; Delsman, J. R.; Karaoulis, M.; Gunnink, J.; Pauw, P.; Vermaas, T.

2017-12-01

In a setting of predominantly saline surface waters in Zeeland, the Netherlands, the only available shallow fresh groundwater is present in the form of freshwater lenses floating on top of the saline groundwater. This fresh water is vital for agricultural, industrial, ecological, water conservation and drinking water functions. An essential first step for managing the usable water properly is to know the present spatial fresh-brackish-saline groundwater distribution. As traditional salinity monitoring is labor-intensive, airborne electromagnetics, which is fast and can cover large areas in short time, is an efficient alternative. A consortium of BGR, Deltares and TNO conducted FRESHEM Zeeland (FREsh Salt groundwater distribution by Helicopter ElectroMagnetic survey in the Province of Zeeland) in 2014-17. An area of more than 2000 square km was surveyed using BGR's helicopter-borne geophysical system totaling to about 9,600 line-km. The HEM data, after inversion to 2.5 Million resistivity-depth models for each of the three 1D inversion procedures applied (Marquardt single site, smooth and sharp laterally constrained inversion), served as base-line information for further interpretation. A probabilistic Monte Carlo approach combines HEM resistivities, 3D lithology model data (GeoTOP), laboratory results (formation factor and surface conductivity) and local in-situ groundwater measurements for the translation of resistivity to Chloride concentration. The resulting 3D voxel model enables stakeholders to implement spatial Chloride concentration in their groundwater models.

Landsat TM data processing for lithological discrimination in the Caraculo area (Namibe Province, SW Angola)

Science.gov (United States)

Alberti, A.; Alessandro, V.; Pieruccini, U.; Pranzini, E.

1993-10-01

Landsat TM data were used for lithological discrimination and mapping in the little-known, semiarid 900 km 2 area around Caraculo station and the middle course of the Rio Giraul (Namibe Province, SW Angola) following two main procedures. The first of these was based on visual evaluation of three-band composites, band-ratio composites and Principal Component Analysis. The second method relied on the extraction of spectral signatures, and their use to obtain automatic classifications. Satisfactory results were reached with the first procedure, thus allowing - with limited support of ground information — the draft of a lithological map, while the second method was not systematically efficient, even for confirmation of data acquired with the first procedure. Image interpretation suggests that an extensive but hithertoun differentiated metasedimentary complex consisting of a heterogeneous supracrustal sequence should be subdivided into at least two units. Field observations proved that one of these is marked by a notable frequency of marbles and the other is characterized by a widespread occurrence of amphibolitic bodies. Moreover, a belt of undetermined (thermally metamorphosed ?) metamorphic rocks is interposed between them. The distinction of so far unidentified units, though restricted to interpretation of processed Landsat TM data, has significant geological implications also in the regional context and will be helpful in guiding future work with conventional geological methods.

Evaluation of repeated measurements of radon-222 concentrations in well water sampled from bedrock aquifers of the Piedmont near Richmond, Virginia, USA: Effects of lithology and well characteristics

International Nuclear Information System (INIS)

Harris, Shelley A.; Billmeyer, Ernest R.; Robinson, Michael A.

2006-01-01

Radon ( 222 Rn) concentrations in 26 ground water wells of two distinct lithologies in the Piedmont of Virginia were measured to assess variation in ground water radon concentrations (GWRC), to evaluate differences in concentrations related to well characteristics, lithology, and spatial distributions, and to assess the feasibility of predicting GWRC. Wells were sampled in accordance with American Public Health Association Method 7500 Rn-B, with modifications to include a well shaft profile analysis that determined the minimum purge time sufficient to remove the equivalent of one column of water from each well. Statistically significant differences in GWRC were found in the Trssu (1482±1711 pCi/L) and Mpg (7750±5188 pCi/L) lithologies, however, no significant differences were found among GWRC at each well over time. Using multiple regression, 86% of the variability (R 2 ) in the GWRC was explained by the lithology, latitudinal class, and water table elevation of the wells. The GWRC in a majority of the wells studied exceed US Environmental Protection Agency designated maximum contaminant level and AMCL. Results support modifications to sampling procedures and indicate that, in previous studies, variations in GWRC concentrations over time may have been due in part to differences in sampling procedures and not in source water

Landsat 5 TM images and DEM in lithologic mapping of Payen Volcanic Field (Mendoza Province, Argentina)

International Nuclear Information System (INIS)

Fornaciai, A.; Bisson, M.; Mazzarini, F.; Del Carlo, P.; Pasquare, G.

2009-01-01

Satellite image such as Landsat 5 TM scene provides excellent representation of Earth and synoptic view of large geographic areas in different band combination. Landsat TM images allow automatic and semi-automatic classification of land cover, nevertheless the software frequently may some difficulties in distinguishing between similar radiometric surfaces. In this case, the use of Digital Elevation Model (DEM) can be an important tool to identify different surface covers. In this study, several False Color Composite (FCC) of Landsat 5 TM Image, DEM and the respective draped image of them, were used to delineate lithological boundaries and tectonic features of regional significance of the Paven Volcanic Field (PVF). PFV is a Quaternary fissural structure belonging to the black-arc extensional areas of the Andes in the Mendoza Province (Argentina) characterized by many composite basaltic lava flow fields. The necessity to identify different lava flows with the same composition, and then with same spectral features, allows to highlight the improvement of synergic use of TM images and shaded DEM in the visual interpretation. Information obtained from Satellite data and DEM have been compared with previous geological maps and transferred into a topographical base map. Based on these data a new lithological map at 1:100.000 scale has been presented [it

Use of spectral gamma ray as a lithology guide for fault rocks: A case study from the Wenchuan Earthquake Fault Scientific Drilling project Borehole 4 (WFSD-4).

Science.gov (United States)

Amara Konaté, Ahmed; Pan, Heping; Ma, Huolin; Qin, Zhen; Guo, Bo; Yevenyo Ziggah, Yao; Kounga, Claude Ernest Moussounda; Khan, Nasir; Tounkara, Fodé

2017-10-01

The main purpose of the Wenchuan Earthquake Fault Scientific drilling project (WFSD) was to produce an in-depth borehole into the Yingxiu-Beichuan (YBF) and Anxian-Guanxian faults in order to gain a much better understanding of the physical and chemical properties as well as the mechanical faulting involved. Five boreholes, namely WFSD-1, WFSD-2, WFSD-3P, WFSD-3 and WFSD-4, were drilled during the project entirety. This study, therefore, presents first-hand WFSD-4 data on the lithology (original rocks) and fault rocks that have been obtained from the WFSD project. In an attempt to determine the physical properties and the clay minerals of the lithology and fault rocks, this study analyzed the spectral gamma ray logs (Total gamma ray, Potassium, Thorium and Uranium) recorded in WFSD-4 borehole on the Northern segment of the YBF. The obtained results are presented as cross-plots and statistical multi log analysis. Both lithology and fault rocks show a variability of spectral gamma ray (SGR) logs responses and clay minerals. This study has shown the capabilities of the SGR logs for well-logging of earthquake faults and proves that SGR logs together with others logs in combination with drill hole core description is a useful method of lithology and fault rocks characterization. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integration of DAS (distributed acoustic sensing) vertical seismic profile and geostatistically modeled lithology data to characterize an enhanced geothermal system.

Science.gov (United States)

Cronin, S. P.; Trainor Guitton, W.; Team, P.; Pare, A.; Jreij, S.; Powers, H.

2017-12-01

In March 2016, a 4-week field data acquisition took place at Brady's Natural Lab (BNL), an enhanced geothermal system (EGS) in Fallan, NV. During these 4 weeks, a vibe truck executed 6,633 sweeps, recorded by nodal seismometers, horizontal distributed acoustic sensing (DAS) cable, and 400 meters of vertical DAS cable. DAS provides lower signal to noise ratio than traditional geophones but better spatial resolution. The analysis of DAS VSP included Fourier transform, and filtering to remove all up-going energy. Thus, allowing for accurate first arrival picking. We present an example of the Gradual Deformation Method (GDM) using DAS VSP and lithological data to produce a distribution of valid velocity models of BNL. GDM generates continuous perturbations of prior model realizations seeking the best match to the data (i.e. minimize the misfit). Prior model realizations honoring the lithological data were created using sequential Gaussian simulation, a commonly used noniterative geostatistical method. Unlike least-squares-based methods of inversion, GDM readily incorporates a priori information, such as a variogram calculated from well-based lithology information. Additionally, by producing a distribution of models, as opposed to one optimal model, GDM allows for uncertainty quantification. This project aims at assessing the integrated technologies ability to monitor changes in the water table (possibly to one meter resolution) by exploiting the dependence of seismic wave velocities on water saturation of the subsurface. This project, which was funded in part by the National Science Foundation, is a part of the PoroTomo project, funded by a grant from the U.S. Department of Energy.

Lithology and uranium potential of Jurassic formations in the San Ysidro--Cuba and majors ranch areas, northwestern New Mexico

International Nuclear Information System (INIS)

Santos, E.S.

1975-01-01

The aggregate thickness of sedimentary rocks of Jurassic age near the eastern and southeastern margin of the San Juan Basin in Sandoval County, N. Mex., is about 1150 feet (350 metres). The Entrada Sandstone is the base. The Entrada Sandstone, 97 to 227 feet (30 to 69 m) thick, consists of red and brown siltstone and fine-grained sandstone and brown and white sandstone. The Todilto Formation, 5 to 125 feet (1.5 to 38 m) thick, consists of a limestone unit and a massive white gypsum unit. The Summerville Formation, 0 to 50 feet (0 to 15 m) thick, consists of variegated, interstratified mudstone, claystone, siltstone, and sandstone. The Morrison Formation, 750 to 870 feet (229 to 265 m) thick, is divided into three members. The Recapture Member consists mainly of red and white color-banded fine-grained sandstone. The Westwater Canyon and Brushy Basin Members consist mainly of red and green mudstone interstratified with grayish-orange arkosic sandstone. The upper unit of the Brushy Basin Member is called the Jackpile sandstone, a name of economic usage. Most of the sandstone in the Morrison Formation above the Recapture Member in the area studied is considered to be a potential host for uranium ore deposits. (auth)

Subsurface imaging of water electrical conductivity, hydraulic permeability and lithology at contaminated sites by induced polarization

Science.gov (United States)

Maurya, P. K.; Balbarini, N.; Møller, I.; Rønde, V.; Christiansen, A. V.; Bjerg, P. L.; Auken, E.; Fiandaca, G.

2018-05-01

At contaminated sites, knowledge about geology and hydraulic properties of the subsurface and extent of the contamination is needed for assessing the risk and for designing potential site remediation. In this study, we have developed a new approach for characterizing contaminated sites through time-domain spectral induced polarization. The new approach is based on: (1) spectral inversion of the induced polarization data through a reparametrization of the Cole-Cole model, which disentangles the electrolytic bulk conductivity from the surface conductivity for delineating the contamination plume; (2) estimation of hydraulic permeability directly from the inverted parameters using a laboratory-derived empirical equation without any calibration; (3) the use of the geophysical imaging results for supporting the geological modelling and planning of drilling campaigns. The new approach was tested on a data set from the Grindsted stream (Denmark), where contaminated groundwater from a factory site discharges to the stream. Two overlapping areas were covered with seven parallel 2-D profiles each, one large area of 410 m × 90 m (5 m electrode spacing) and one detailed area of 126 m × 42 m (2 m electrode spacing). The geophysical results were complemented and validated by an extensive set of hydrologic and geologic information, including 94 estimates of hydraulic permeability obtained from slug tests and grain size analyses, 89 measurements of water electrical conductivity in groundwater, and four geological logs. On average the IP-derived and measured permeability values agreed within one order of magnitude, except for those close to boundaries between lithological layers (e.g. between sand and clay), where mismatches occurred due to the lack of vertical resolution in the geophysical imaging. An average formation factor was estimated from the correlation between the imaged bulk conductivity values and the water conductivity values measured in groundwater, in order to

Mechanical-Stratigraphic Characterization of the Eagle Ford Formation in Outcrop and Core, McMullen and Terrell Counties, Texas

Science.gov (United States)

Xu, G.; Chester, J. S.; Chester, F. M.

2017-12-01

The objective of this project is to characterize the geomechanical properties of individual and composite lithologic units over length scales of decimeter to tens of meters. We have characterized the stratigraphy and lithology of the Eagle Ford Formation in outcrops at Lozier and Antonio Canyons of West TX, and in core taken at 3.2 km depth in McMullen County, TX. Dominant lithologies examined include reworked ash layers, argillaceous mudstone, organic-rich mudstone, foraminifera wackestone, packstone, pyritic packstone, and foraminifera/dolomitic packstone-grainstone. Samples of these units are deformed in triaxial compression at 1- 40 MPa confining pressure (Pc), and room temperature and humidity. The elastic properties, pre-fracture yielding (ductility), and fracture strength are primarily a function of particle size, texture (degree of mud versus grain support), and composition. Young's Modulus (YM) and Poison's Ratio (PR) increase similarly with an increase in grain-support and carbonate content, and a decrease in organic matter and clay. The greatest change occurs at the transition from mud-supported to grain-supported textures where YM and PR increase by a factor of 3 and 1.5, respectively. Both YM and PR can display anisotropy with directional variation of 30%, most notably in micro-laminated units, but also in the more massive pyritic packstones. Overall, pre-fracture ductility decreases with an increase in carbonate content; ductile strain in the argillaceous- and organic-rich-mudstones is 1.4%, 3-4 times greater than that in the packstone/grainstone. Fracture strength increases with an increase in carbonate content and a decrease in clay content. The organic rich mudstone fails at 130 MPa, is nearly 2 times stronger than argillaceous mudstones, and 50% weaker than packstone/grainstones at 1 MPa Pc. The angle of internal friction is 45 degrees for all lithologies, consistent with a transition in fracture from opening- to shear-mode between 1 to 15 MPa Pc

Geochemical insights into the lithology of mantle sources for Cenozoic alkali basalts in West Qinling, China

Science.gov (United States)

Dai, Li-Qun; Zheng, Fei; Zhao, Zi-Fu; Zheng, Yong-Fei

2018-03-01

Although alkali basalts are common in oceanic islands and continental rifts, the lithology of their mantle sources is still controversial. While the peridotite is usually viewed as a common source lithology, there are increasing studies suggesting significant contributions from ultramafic metasomatites such as carbonated peridotite, pyroxenite and hornblendite to the origin of alkali basalts. The present study indicates that carbonated peridotite plus hornblendite would have served as the mantle sources of Cenozoic alkali basalts from the West Qinling orogen in China. The target basalts show low SiO2 contents of 36.9 to 40.8 wt% and highly variable Na2O + K2O contents from 0.86 to 4.77 wt%, but high CaO contents of 12.5 to 16.3 wt% and CaO/Al2O3 ratios of 1.42 to 2.19. They are highly enriched in the majority of incompatible trace elements, but depleted in Rb, K, Pb, Zr, Hf, and Ti. Furthermore, they exhibit high (La/Yb)N, Zr/Hf, Ce/Pb and Nb/Ta ratios, but low Ti/Eu and Hf/Sm ratios. Generally, with increasing (La/Yb)N and CaO/Al2O3 ratios, their Ti/Eu and Hf/Sm ratios decrease whereas their Zr/Hf, Ce/Pb and Nb/Ta ratios increase. These major and trace element features are similar to those of carbonatites and hornblendite-derived melts to some extent, but significantly different from those of mid-ocean ridge basalts (MORB). This suggests that the alkali basalts would be originated from metasomatic mantle sources. A comparison of the major-trace elements in the alkali basalts with those of some representative mantle-derived melts indicates that the source lithology of alkali basalts is a kind of ultramafic metasomatites that are composed of carbonated peridotite and hornblendite. Such metasomatites would be generated by reaction of the depleted MORB mantle peridotite with hydrous, carbonate-bearing felsic melts derived from partial melting of the subducted Paleotethyan oceanic crust. Therefore, the melt-peridotite reaction at the slab-mantle interface in the

Formation of the oil composition of the Yu0 Bazhenov formation, Salym oil field

Directory of Open Access Journals (Sweden)

E.V. Soboleva

2017-05-01

Full Text Available The Bazhenov horizon of Western Siberia has been studied in considerable detail from different perspectives and different methods, a large number of studies have been devoted to a wide range of issues related to the lithological composition of rocks, their reservoir properties, the study of organic matter, properties and composition of oil at various analytical levels, and many others. This work is devoted to restoring conditions for the formation of oil properties and composition of the Yu0 Salym oil field, based mainly on the geochemical aspects of the study of oil changes both in area and in the section within the productive layer of Salym structure, using some geological data, such as structural plan for the reflecting horizon B (the roof of the Bazhenov formation, having a complex configuration, reservoir temperatures and pressure, well flow rates, and others. There is no single reservoir at the Salym field in the Yu0 formation. For the conclusions of the geological-geochemical interpretation, a sampling of 61 samples of oil from exploration, appraisal and production wells of the initial stages of production was used, since in the future when oil is extracted, the ecology in the deposits changes, and 21 samples of oil from other fields in the West Siberian oil and gas basin. Conventionally, three types of oils are distinguished, differing in their physicochemical parameters, group hydrocarbon and molecular composition. It was suggested that in addition to the own organic matter of the Bazhenov formation, hydrocarbon fluids of the Vasyugan, Tyumen formations and possibly Paleozoic rocks were involved in the formation of the oil composition. The flow of light liquid hydrocarbons and gases occurred along the zones of faults of different genesis and duration of existence.

Utilizing borehole electrical images to interpret lithofacies of fan-delta: A case study of Lower Triassic Baikouquan Formation in Mahu Depression, Junggar Basin, China

Directory of Open Access Journals (Sweden)

Yuan Rui

2017-11-01

Full Text Available Large-scale conglomerate fan-delta aprons were typical deposits on the slope of Mahu Depression during the Early Triassic. Without outcrops, it is difficult to study the lithofacies only by examining the limited cores from the main oil-bearing interval of the Baikouquan Formation. Borehole electrical imaging log provides abundant high-resolution geologic information that is obtainable only from real rocks previously. Referring to the lithology and sedimentary structure of cores, a case study of fan-deltas in the Lower Triassic Baikouquan Formation of the Mahu Depression presents a methodology for interpreting the complicated lithofacies utilizing borehole electrical images. Eleven types of lithologies and five types of sedimentary structures are summarized in borehole electrical images. The sediments are fining upward from gravel to silt and clay in the Baikouquan Formation. Fine-pebbles and granules are the main deposits in T1b1 and T1b2, but sandstones, siltstones and mudstones are more developed in T1b3. The main sedimentary textures are massive beddings, cross beddings and scour-and-fill structures. Parallel and horizontal beddings are more developed in T1b3 relatively. On integrated analysis of the lithology and sedimentary structure, eight lithofacies from electrical images, referred to as image lithofacies, is established for the fan-deltas. Granules to coarse-pebbles within massive beddings, granules to coarse-pebbles within cross and parallel beddings, siltstones within horizontal and massive beddings are the most developed lithofacies respectively in T1b1, T1b2 and T1b3. It indicates a gradual rise of the lake level of Mahu depression during the Early Triassic, with the fan-delta aprons retrograding towards to the margin of the basin. Therefore, the borehole electrical imaging log compensate for the limitation of cores of the Baikouquan Formation, providing an effective new approach to interpret the lithofacies of fan-delta.

Utilizing borehole electrical images to interpret lithofacies of fan-delta: A case study of Lower Triassic Baikouquan Formation in Mahu Depression, Junggar Basin, China

Science.gov (United States)

Yuan, Rui; Zhang, Changmin; Tang, Yong; Qu, Jianhua; Guo, Xudong; Sun, Yuqiu; Zhu, Rui; Zhou, Yuanquan (Nancy)

2017-11-01

Large-scale conglomerate fan-delta aprons were typical deposits on the slope of Mahu Depression during the Early Triassic. Without outcrops, it is difficult to study the lithofacies only by examining the limited cores from the main oil-bearing interval of the Baikouquan Formation. Borehole electrical imaging log provides abundant high-resolution geologic information that is obtainable only from real rocks previously. Referring to the lithology and sedimentary structure of cores, a case study of fan-deltas in the Lower Triassic Baikouquan Formation of the Mahu Depression presents a methodology for interpreting the complicated lithofacies utilizing borehole electrical images. Eleven types of lithologies and five types of sedimentary structures are summarized in borehole electrical images. The sediments are fining upward from gravel to silt and clay in the Baikouquan Formation. Fine-pebbles and granules are the main deposits in T1b1 and T1b2, but sandstones, siltstones and mudstones are more developed in T1b3. The main sedimentary textures are massive beddings, cross beddings and scour-and-fill structures. Parallel and horizontal beddings are more developed in T1b3 relatively. On integrated analysis of the lithology and sedimentary structure, eight lithofacies from electrical images, referred to as image lithofacies, is established for the fan-deltas. Granules to coarse-pebbles within massive beddings, granules to coarse-pebbles within cross and parallel beddings, siltstones within horizontal and massive beddings are the most developed lithofacies respectively in T1b1, T1b2 and T1b3. It indicates a gradual rise of the lake level of Mahu depression during the Early Triassic, with the fan-delta aprons retrograding towards to the margin of the basin. Therefore, the borehole electrical imaging log compensate for the limitation of cores of the Baikouquan Formation, providing an effective new approach to interpret the lithofacies of fan-delta.

The StreamCat Dataset: Accumulated Attributes for NHDPlusV2 (Version 2.1) Catchments for the Conterminous United States: Surficial Lithology in Watershed

Data.gov (United States)

U.S. Environmental Protection Agency — This dataset represents the density of 18 USGS lithology classes within individual, local NHDPlusV2 catchments and upstream, contributing watersheds(see Data Sources...

Formation evaluation in liquid-dominated geothermal reservoirs

Energy Technology Data Exchange (ETDEWEB)

Ershaghi, I.; Dougherty, E.E.; Handy, L.L.

1981-04-01

Studies relative to some formation evaluation aspects of geothermal reservoirs are reported. The particular reservoirs considered were the liquid dominated type with a lithology of the sedimentary nature. Specific problems of interest included the resistivity behavior of brines and rocks at elevated temperatures and studies on the feasibility of using the well log resistivity data to obtain estimates of reservoir permeability. Several papers summarizing the results of these studies were presented at various technical meetings for rapid dissemination of the results to potential users. These papers together with a summary of data most recently generated are included. A brief review of the research findings precedes the technical papers. Separate abstracts were prepared for four papers. Five papers were abstracted previously for EDB.

The influence of sea-level changes on tropical coastal lowlands; the Pleistocene Coropina Formation, Suriname

Science.gov (United States)

Wong, Th. E.; de Kramer, R.; de Boer, P. L.; Langereis, C.; Sew-A-Tjon, J.

2009-04-01

The Pleistocene Coropina Formation largely constitutes the Old Coastal Plain of Suriname. It is exposed fully only in open-pit bauxite mines in the central coastal plain as part of the unconsolidated overburden of Paleocene-Eocene bauxites. This study deals with the stratigraphy, sedimentology and chronology of this formation, and is based on a study in the recently closed Lelydorp-III bauxite mine operated by N.V. BHP Billiton Maatschappij Suriname. The Coropina Formation consists of the Para and Lelydorp Members. We present a detailed lithological subdivision of these members. In the Para Member, four units are discerned which are grouped in two transgressive cycles, both ranging upward from terrestrial towards chenier and coastal mudflat deposits reflecting glacio-eustatic sea-level changes. The sandy sediments represent fluviatile and beach-bar (chenier) deposits, and were supplied by rivers from the Precambrian basement and to a lesser extent by westward longshore coastal drift. Clays, largely derived from the Amazon River and transported alongshore over the shelf, were deposited in extensive coastal mudflats. The Lelydorp Member, also comprising four units, represents a depositional system that is closely comparable to the recent Suriname coastal setting, i.e., a lateral and vertical alternation of mudflat and chenier deposits formed over a period characterised by more or less constant sea level. Palaeomagnetic data indicate a dominantly reversed magnetic polarity in the Para Member, whereas the Lelydorp Member shows a normal magnetic polarity with a minor reversed polarity overprint. The reversed polarities of the Para Member exclude a Brunhes Chron (0.78-0.0 Ma) age, and thus assign it to the Matuyama Chron (2.58-0.78 Ma). This implies that the Coropina Formation is much older than hitherto assumed, and that one or more (long-term) hiatuses are not recognizable in the lithological succession.

Lithological and land-use based assessment of heavy metal pollution in soils surrounding a cement plant in SW Europe.

Science.gov (United States)

Cutillas-Barreiro, Laura; Pérez-Rodríguez, Paula; Gómez-Armesto, Antía; Fernández-Sanjurjo, María José; Álvarez-Rodríguez, Esperanza; Núñez-Delgado, Avelino; Arias-Estévez, Manuel; Nóvoa-Muñoz, Juan Carlos

2016-08-15

We study the influence of phasing out a cement plant on the heavy metal (Hg, Pb and Cr) content in the surrounding soils, taking into account factors often neglected, such as contributions due to local lithology or land use. The range of total Hg was 10-144µg kg(-1), reaching up to 41 and 145mgkg(-1) for total contents of Pb and Cr, respectively. Forest soils showed higher concentration of Hg than prairie soils, indicating the importance of land use on the accumulation of volatile heavy metals in soils. In forest soils, total Hg showed a trend to decrease with soil depth, whereas in prairie soils the vertical pattern of heavy metal concentrations was quite homogeneous. In most cases, the distance to the cement plant was not a factor of influence in the soils content of the analyzed heavy metals. Total Pb and Cr contents in soils nearby the cement plant were quite similar to those found in the local lithology, resulting in enrichment factor values (EF's) below 2. This suggests that soil parent material is the main source of these heavy metals in the studied soils, while the contribution of the cement plant to Pb and Cr soil pollution was almost negligible. On the contrary, the soils surrounding the cement plant accumulate a significant amount of Hg, compared to the underlying lithology. This was especially noticeable in forest soils, where Hg EF achieved values up to 36. These results are of relevance, bearing in mind that Hg accumulation in soils may be an issue of environmental concern, particularly in prairie soils, where temporal flooding can favor Hg transformation to highly toxic methyl-Hg. In addition, the concurrence of acid soils and total-Cr concentrations in the range of those considered phytotoxic should be also stressed. Copyright © 2016 Elsevier B.V. All rights reserved.

Lithologic Controls on Structure Highlight the Role of Fluids in Failure of a Franciscan Complex Accretionary Prism Thrust Fault

Science.gov (United States)

Bartram, H.; Tobin, H. J.; Goodwin, L. B.

2015-12-01

Plate-bounding subduction zone thrust systems are the source of major earthquakes and tsunamis, but their mechanics and internal structure remain poorly understood and relatively little-studied compared to faults in continental crust. Exposures in exhumed accretionary wedges present an opportunity to study seismogenic subduction thrusts in detail. In the Marin Headlands, a series of thrusts imbricates mechanically distinct lithologic units of the Mesozoic Franciscan Complex including pillow basalt, radiolarian chert, black mudstone, and turbidites. We examine variations in distribution and character of structure and vein occurrence in two exposures of the Rodeo Cove thrust, a fossil plate boundary exposed in the Marin Headlands. We observe a lithologic control on the degree and nature of fault localization. At Black Sand Beach, deformation is localized in broad fault cores of sheared black mudstone. Altered basalts, thrust over greywacke, mudstone, and chert, retain their coherence and pillow structures. Veins are only locally present. In contrast, mudstone is virtually absent from the exposure 2 km away at Rodeo Beach. At this location, deformation is concentrated in the altered basalts, which display evidence of extensive vein-rock interaction. Altered basalts exhibit a pervasive foliation, which is locally disrupted by both foliation-parallel and cross-cutting carbonate-filled veins and carbonate cemented breccia. Veins are voluminous (~50%) at this location. All the structures are cut by anastomosing brittle shear zones of foliated cataclasite or gouge. Analyses of vein chemistry will allow us to compare the sources of fluids that precipitated the common vein sets at Rodeo Beach to the locally developed veins at Black Sand Beach. These observations lead us to hypothesize that in the absence of a mechanically weak lithology, elevated pore fluid pressure is required for shear failure. If so, the vein-rich altered basalt at Rodeo Beach may record failure of an

Lithology and Stratigraphy of Holes Drilled in LANL-Use Areas of the Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

Lance B. Prothro; Sigmund L. Drellack, Jr.; Brian M. Allen

1999-07-01

Geologic data for ten holes drilled in areas used by Los Alamos National Laboratory at the Nevada Test Site are presented in this report. The holes include emplacement holes, instrumentation holes, and Underground Test Area wells drilled during calendar years 1991 through 1995. For each hole a stratigraphic log, a detailed lithologic log, and one or two geologic cross sections are presented, along with a supplemental data sheet containing information about the drilling operations, geology, or references. For three of the holes, graphic data summary sheets with geologic and geophysical data are provided as plates.

Waste Isolation Pilot Plant: Draft Supplement Environmental Impact Statement

International Nuclear Information System (INIS)

1989-04-01

The US Department of Energy (DOE) has prepared this supplement to the 1980 Final Environmental Impact Statement (FEIS) for the Waste Isolation Pilot Plant (WIPP) in order to assess the environmental impacts that may occur from the continued development of the WIPP as a minced geologic repository for transuranic (TRU) waste. Since the publication of the FEIS in October 1980, new data collected at the WIPP have led to changes in the understanding of the hydrogeologic characteristics of the area and their potential implications for the long-term performance of the WIPP. In addition, there have been changes in the FEIS Proposed Action and new regulatory requirements. This supplement to the FEIS (SEIS) evaluates the environmental consequences of the Proposed Action as modified since 1980 in light of new data and assumptions. The new information pertains mainly to the geologic and hydrologic systems at the WIPP site and their effect on the long-term performance of the WIPP. The SEIS includes new data indicating that: the permeability of the Salado Formation, the geologic formation in which the WIPP underground facilities are located, is lower than previously believed; the moisture content of the Salado Formation and the consequent brine inflow is higher than previously believed; a higher transmissivity zone is present in the Rustler Formation in the southeastern portion of the WIPP site; and ''salt creep'' (convergence) in the repository occurs faster than previously believed. Volume 2 contains 11 appendices

Summary of site-characterization studies conducted from 1983 through 1987 at the Waste Isolation Pilot Plant (WIPP) site, southeastern New Mexico

International Nuclear Information System (INIS)

Lappin, A.R.

1988-01-01

The Waste Isolation Pilot Plant (WIPP) is being excavated at a depth of approximately 655 m in bedded halites. Site-characterization activities at the WIPP site began in 1976. Characterization activities since 1983 have had the objective of updating the conceptual model for the geologic and hydrologic behavior of the WIPP site and vicinity. This paper discusses aspects of the general conceptual model significant to both site characterization and performance assessment. The geological and hydrologic behavior of the WIPP site and vicinity is transient, and has been transient since at least deposition of the Permian Salado Formation containing the underground workings of the WIPP facility. The Salado Formation deforms regionally in response to gravity, but is very low in permeability, except within approximately two meters of the WIPP facility. The Culebra Dolomite Member of the Rustler Formation dominates the hydrology at the WIPP site. Hydrologic measurements, geologic studies, major-element and minor-element distributions in Culebra fluids, and the results of isotopic studies (stable-isotope, radiocarbon, uranium-disequilibrium, and 87 Sr/ 86 Sr) are consistent with the interpretations that, although the Culebra dominates flow within the Rustler at the WIPP site and Rustler karst is not present, there has been limited vertical fluid movement within the Rustler and between the Rustler and the overlying Dewey Lake Red Beds

Site selection and evaluation studies of the Waste Isolation Pilot Plant (WIPP), Los Medanos, Eddy County, NM

International Nuclear Information System (INIS)

Griswold, G.B.

1977-12-01

Bedded-salt deposits of the Salado Formation have been selected for evaluation for a proposed Waste Isolation Pilot Plant (WIPP) to be located in Eddy County, NM, approximately 26 mi east of Carlsbad. Site selection and evaluation studies that included geologic mapping, geophysical surveys, drilling, and resource appraisal were conducted over and under the prospective location. The lower portion of the Salado meets essential criteria for waste isolation. Beds chosen for waste storage lie 2074 to 2730 ft below the surface. High-purity salt exists at these depths, and the geologic structure revealed by geophysical surveys indicates that these beds are essentially flat. Additional geophysical surveys are now under way. The initial interpretation of the new data indicates that more structure may exist in the salt beds in the northern portion of the site area. Full evaluation of potentially commercial deposits of potash and natural gas within the WIPP site will be reported by separate studies, as will be the hydrologic details of the region

Radon and Radioactivity in Spanish Spas of Different Geological Formations

International Nuclear Information System (INIS)

Rodenas, C.; Gomez, J.; Soto, J.; Quindos, L.S.; Maraver, F.

2009-01-01

Gross-α and gross-β activity, 222 Rn and 226 Ra of 82 thermal water samples in Spain were performed in order to determine their radioactivity. Gross- α and gross- β activity ranged from LLD to 17 Bq.l - 1 and from LLD to 60 Bq.l - 1, respectively. 226 Ra concentrations ranged from - 1. 222 Rn concentrations ranged from - 1. The observed values were correlated with the geological formations and structure of the area. Significant differences have been found depending on the geological characteristics of the area of the reference. The highest levels are usually found in granites but concentrations vary considerably between spring waters within each lithology

LITHOLOGIC CONDITIONS OF THE WATER TABLE LOGGING IN THE AREA OF HAĆKI VILLAGE IN THE BIELSKA PLAIN

Directory of Open Access Journals (Sweden)

Krzysztof Micun

2016-05-01

Full Text Available The aim of the study was to examine lithological conditions of the water table in the area of Haćki village located in the Bielska Plain. The study involved the measurements of water level in dug wells, hand drill probing to a depth of 5 m, acquiring the samples of water-bearing deposits and analysing their granulation. The results of analyses allowed to calculate the permeability coefficient. The geological structure of the area is dominated by dusty deposits of various origins. Such deposits’ formation directly affects the conditions of filtration and depth of the water table. Groundwater logging near Haćki village in the Bielska Plain appears at a depth of several tens of centimeters to 2 meters in the depressions field and up a little over 5 meters in the case of higher ground surfaces. The presence of perched water was revealed on the hills, periodic leachates at the foot of the hills and scarps and one periodic spring. Water-bearing deposits are medium sands, fine sands and loamy fine sands or fine sands with silt. Consequently, the permeability coefficient is low or even very low. Its values range from 0,001 m·d-1 to 3,8 m·d-1 (d – 24 hours. The widespread presence of dusty deposits in the area affects the limited efficiency of the water table.

Qualitatively Modeling solute fate and transport across scales in an agricultural catchment with diverse lithology

Science.gov (United States)

Wayman, C. R.; Russo, T. A.; Li, L.; Forsythe, B.; Hoagland, B.

2017-12-01

As part of the Susquehanna Shale Hills Critical Zone Observatory (SSHCZO) project, we have collected geochemical and hydrological data from several subcatchments and four monitoring sites on the main stem of Shaver's Creek, in Huntingon county, Pennsylvania. One subcatchment (0.43 km2) is under agricultural land use, and the monitoring locations on the larger Shaver's Creek (up to 163 km2) drain watersheds with 0 to 25% agricultural area. These two scales of investigation, coupled with advances made across the SSHCZO on multiple lithologies allow us to extrapolate from the subcatchment to the larger watershed. We use geochemical surface and groundwater data to estimate the solute and water transport regimes within the catchment, and to show how lithology and land use are major controls on ground and surface water quality. One area of investigation includes the transport of nutrients between interflow and regional groundwater, and how that connectivity may be reflected in local surface waters. Water and nutrient (Nitrogen) isotopes, will be used to better understand the relative contributions of local and regional groundwater and interflow fluxes into nearby streams. Following initial qualitative modeling, multiple hydrologic and nutrient transport models (e.g. SWAT and CYCLES/PIHM) will be evaluated from the subcatchment to large watershed scales. We will evaluate the ability to simulate the contributions of regional groundwater versus local groundwater, and also impacts of agricultural land management on surface water quality. Improving estimations of groundwater contributions to stream discharge will provide insight into how much agricultural development can impact stream quality and nutrient loading.

Ground deformation at collapse calderas: influence of host rock lithology and reservoir multiplicity

Energy Technology Data Exchange (ETDEWEB)

Geyer, A; Gottsmann, J [Department of Earth Sciences, University of Bristol, Wills Memorial Building, Queen' s Road, BS8 1RJ, Bristol (United Kingdom)], E-mail: A.GeverTraver@bristol.ac.uk

2008-10-01

A variety of source mechanisms have been proposed to account for observed caldera deformation. Here we present a systematic set of new results from numerical forward modelling using a Finite Element Method. which provides a link between measured ground deformation and the inaccessible deformation source. We simulate surface displacements due to pressure changes in a shallow oblate reservoir overlain by host rock with variable mechanical properties. We find that the amplitude and wavelength of resultant ground deformation is dependent on the distribution of mechanically stiff and soft lithologies and their relative distribution above a reservoir. In addition, we note an influence of layering on the critical ratio of horizontal over vertical displacements, a criterion employed to discriminate between different finite source geometries.

Effect of lithological variations of mine roof on chock shield support using numerical modeling technique

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-09-15

Interaction between chock shield supports, the most popular powered supports in Indian longwall mines, and surrounding coal measure strata is analyzed using finite element models. Thickness and material properties of the main roof, the immediate roof and the coal seam are varied to simulate various geological conditions of Indian coal measure strata. Contact/gap elements are inserted in between the main roof and overburden layer to allow strata separation. Nonlinear material properties are applied with plastic corrections based on Drucker-Prager yield criterion. This paper illustrates effects of lithological variations on shield load, abutment stress, yield zone and longwall face convergence.

Ordovician and Silurian Phi Kappa and Trail Creek formations, Pioneer Mountains, central Idaho; stratigraphic and structural revisions, and new data on graptolite faunas

Science.gov (United States)

Dover, James H.; Berry, William B.N.; Ross, Reuben James

1980-01-01

Recent geologic mapping in the northern Pioneer Mountains combined with the identification of graptolites from 116 new collections indicate that the Ordovician and Silurian Phi Kappa and Trail Creek Formations occur in a series of thrust-bounded slices within a broad zone of imbricate thrust faulting. Though confirming a deformational style first reported in a 1963 study by Michael Churkin, our data suggest that the complexity and regional extent of the thrust zone were not previously recognized. Most previously published sections of the Phi Kappa and Trail Creek Formations were measured across unrecognized thrust faults and therefore include not only structural repetitions of graptolitic Ordovician and Silurian rocks but also other tectonically juxtaposed lithostratigraphic units of diverse ages as well. Because of this discovery, the need to reconsider the stratigraphic validity of these formations and their lithology, nomenclature, structural distribution, facies relations, and graptolite faunas has arisen. The Phi Kappa Formation in most thrust slices has internal stratigraphic continuity despite the intensity of deformation to which it was subjected. As revised herein, the Phi Kappa Formation is restricted to a structurally repeated succession of predominantly black, carbonaceous, graptolitic argillite and shale. Some limy, light-gray-weathering shale occurs in the middle part of the section, and fine-grained locally pebbly quartzite is present at the base. The basal quartzite is here named the Basin Gulch Quartzite Member of the Phi Kappa. The Phi Kappa redefined on a lithologic basis represents the span of Ordovician time from W. B. N. Berry's graptolite zones 2-4 through 15 and also includes approximately 17 m of lithologically identical shale of Early and Middle Silurian age at the top. The lower contact of the formation as revised is tectonic. The Phi Kappa is gradationally overlain by the Trail Creek Formation as restricted herein. Most of the coarser

Sealing of exploratory boreholes in clay reactivity of ordinary portland cement (OPC) grouts and various lithologies from the Harwell research site. Volume 1

International Nuclear Information System (INIS)

Milodowski, A.E.; George, I.A.; Bloodworth, A.J.; Robins, N.S.

1986-01-01

As part of a research programme on the disposal of radioactive wastes in clay, Ordinary Portland Cement (OPC) has been used in the completion of boreholes on the Harwell Research Site, AERE, Oxfordshire. The purpose of this study was to examine the effect of OPC and the alkaline pore fluids generated during its setting on the various lithological types encountered in the boreholes. To facilitate this, samples of core representing the various rock types were selected and cement-rock composites were prepared from these in the laboratory to simulate the borehole cements. After a curing period of 15 months the cores and associated cement plugs were examined for any signs of reactivity or bonding. The best cement-rock bonding was shown by naturally well-cemented sandstone and limestone lithologies. Although no significant chemical reaction was seen to have occurred between OPC and rock, the OPC appears able to bind onto the rock surface because of the rigidity of the rock surface. Therefore, the best cement rock bonding and seal with OPC may be expected in the limestones of the Great Oolite Group, Inferior Oolite Group and parts of the Corallian beds. Because of the reactivity of OPC towards certain lithologies a better borehole seal in such a sedimentary sequence might be achieved using a bentonite backfill in those parts of the sequence which either react with or bond only weakly to OPC

Method and device for measuring formation characteristics of geological formations

International Nuclear Information System (INIS)

Antkiw, S.; Murphy, R.D.

1981-01-01

A well-logging system is described which uses a pulsed neutron source and which by combining measurements of gamma spectra and neutron characteristics enables such parameters as salinity, porosity, water saturation, lithology and schistosity to be registered directly. (JIW)

Mapping groundwater reserves in northwestern Cambodia with the combined use of data from lithologs and time-domain-electromagnetic and magnetic-resonance soundings

Science.gov (United States)

Valois, Remi; Vouillamoz, Jean-Michel; Lun, Sambo; Arnout, Ludovic

2018-01-01

Lack of access to water is the primary constraint to development in rural areas of northwestern Cambodia. Communities lack water for both domestic and irrigation purposes. To provide access to drinking water, governmental and aid agencies have focused on drilling shallow boreholes but they have not had a clear understanding of groundwater potential. The goal of this study has been to improve hydrogeological knowledge of two districts in Oddar Meanchey Province by analyzing borehole lithologs and geophysical data sets. The comparison of 55 time-domain electromagnetic (TEM) soundings and lithologs, as well as 66 magnetic-resonance soundings (MRS) with TEM soundings, allows a better understanding of the links between geology, electrical resistivity and hydrogeological parameters such as the specific yield (S y) derived from MRS. The main findings are that water inflow and S y are more related to electrical resistivity and elevation than to the litholog description. Indeed, conductive media are associated with a null value of S y, whereas resistive rocks at low elevation are always linked to strictly positive S y. A new methodology was developed to create maps of groundwater reserves based on 612 TEM soundings and the observed relationship between resistivity and S y. TEM soundings were inverted using a quasi-3D modeling approach called `spatially constrained inversion'. Such maps will, no doubt, be very useful for borehole siting and in the economic development of the province because they clearly distinguish areas of high groundwater-reserves potential from areas that lack reserves.

Parameters controlling fracturing distribution: example of an Upper Jurassic marly-calcareous formation (eastern Paris Basin); Parametres controlant la distribution de la fracturation: exemple dans une serie marno-calcaire du Jurassique superieur (Est du bassin de Paris)

Energy Technology Data Exchange (ETDEWEB)

Andre, G.; Rebours, H.; Wileveau, Y. [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), Laboratoire de recherche souterrain de Meuse/Haute-Marne, 55 - Bure (France); Proudhon, B. [GEO.TER, 34 - Clapiers (France)

2006-10-15

Study of fractures along a 490-m vertical section of marl/limestone alternations in the Upper Jurassic (Meuse/Haute-Marne underground research laboratory-eastern Paris Basin) reveals their organization and the different states of palaeo-stress. Type and extension of tectonic structures seem to be controlled principally by lithology and secondary by depth. Also, it appears deviations of Alpine palaeo-stresses between Kimmeridgian and Oxfordian formations. These deviations are related to the presence of marl/limestone contacts. The vertical evolution of current horizontal maximum stress shows a similar behaviour, with deviations at the walls of Callovo-Oxfordian argilites. These results allow us to point out and to discuss the impact of lithology, rheology and depth on fracturing occurrence and distribution. Furthermore, this study suggests the role of Callovo-Oxfordian as a barrier for fracture development between the limestones of Dogger and Oxfordian formations. (authors)

Subsurface imaging of water electrical conductivity, hydraulic permeability and lithology at contaminated sites by induced polarization

DEFF Research Database (Denmark)

Maurya, P. K.; Balbarini, Nicola; Møller, I.

2018-01-01

At contaminated sites, knowledge about geology and hydraulic properties of the subsurface and extent of the contamination is needed for assessing the risk and for designing potential site remediation. In this study, we have developed a new approach for characterizing contaminated sites through time...... geological logs. On average the IP-derived and measured permeability values agreed within one order of magnitude, except for those close to boundaries between lithological layers (e.g. between sand and clay), where mismatches occurred due to the lack of vertical resolution in the geophysical imaging...

Basic data report for drillhole WIPP 27 (Waste Isolation Pilot Plant)

International Nuclear Information System (INIS)

1979-10-01

WIPP 27 was drilled in Eddy County, New Mexico (NM 1/4 sec. 21, T21S, R30E) to investigate evaporite dissolution features and to determine the stratigraphy of surface and near-surface formations. The borehole encountered, from top to bottom, 79 feet of Quaternary deposits, 73 feet of the Rustler Formation, and 171 feet of the upper portion of the Salado Formation. Consecutive cores were obtained for the entire depth of WIPP 27. Geophysical logs measure acoustic velocities, density, radioactivity, and formation resistivity. An interpretive report on dissolution in Nash Draw will be based on combined borehole data, surface mapping and laboratory analyses of Nash Draw rocks and fluids

Possibilities for the storage of radioactive waste in deep clay formations

International Nuclear Information System (INIS)

Le Pochat, G.; Lienhardt, M.J.; Peaudecerf, P.; Platel, J.P.; Simon, J.M.; Berest, P.; Charpentier, J.P.; Andre-Jehan, R.

1984-02-01

The possible storage sites in deep clay formations have been studied in parts of large French sedimentary basins which prima facie seem to have suitable characteristics. The most suitable areas were chosen on the basis of earlier oil prospecting data consisting of information on seismic movements, diagraphic well-logging data and old samples that happened to have been preserved. At the same time, the lithology of the clay formations can be determined from mineralogical studies on samples taken from boreholes or from outcrops. Before carrying out in situ experiments concerned with the geotechnical characterization of the deep clays, measurements were made in the laboratory on samples obtained in two ways: from tertiary clay outcrops and from cores taken at 950 m in the clay layers during oil well logging. The results of studies carried out on tertiary clays in Les Landes illustrate this procedure

Strain localization in the lower crust: brittle precursors versus lithological heterogeneities (Musgrave Ranges, Central Australia)

Science.gov (United States)

Hawemann, Friedrich; Mancktelow, Neil; Wex, Sebastian; Pennacchioni, Giorgio; Camacho, Alfredo

2016-04-01

The Davenport shear zone in Central Australia is a strike-slip ductile shear zone developed during the Petermann Orogeny (~ 550 Ma). The conditions of shearing are estimated to be amphibolite-eclogite facies (650 °C, 1.2 GPa). The up to seven kilometre thick mylonite zone encloses several large low strain domains with excellent exposure, thus allowing a thorough study of the initiation of shear zones. Quartzo-feldspathic gneisses and granitoids inherit a suite of lithological heterogeneities such as quartz-rich pegmatites, mafic layers and dykes. When in a favourable orientation to the shortening direction, these rheologically different pre-existing layers might be expected to localize deformation. However, with the singular exception of long, continuous and fine-grained dolerite dykes, this is not observed. Quartz-rich pegmatites are mostly unsheared, even if in a favourable orientation, and sometimes boudinaged or folded. There are instead many shear zones only a few mm to cm in width, extending up to tens of metres, which are in fact oriented at a very high angle to the shortening direction. Parallel to these, a network of little to moderately overprinted brittle fractures are observed, commonly marked by pseudotachylyte (pst) and sometimes new biotite. Shear reactivation of these precursor fractures is generally limited to the length of the initial fracture and typically re-uses and shears the pst. The recrystallized mineral assemblage in the sheared pst consists of Cpx+Grt+Fsp±Ky and is the same to that in the adjacent sheared gneiss, with the same PT estimates (650 °C, 1.2 GPa). In some cases, multiple generations of cross-cutting and sheared pst demonstrate alternating fracture and flow during progressive shear zone development and a clear tendency for subsequent pst formation to also localize in the existing shear zone. The latest pst may be both unsheared and unrecrystallized (no grt) and is probably related to a late stage, still localized within the

Stratigraphic and structural data for the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge, Tennessee: preliminary results from test borehole ORNL-JOY No. 2

International Nuclear Information System (INIS)

Haase, C.S.; Walls, E.C.; Farmer, C.D.

1985-06-01

To resolve long-standing problems with the stratigraphy of the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge National Laboratory (ORNL), an 828.5-m-deep test borehole was drilled. Continuous rock core was recovered from the 17.7- to 828.5-m-deep interval; temperature, caliper, neutron, gamma-ray, and acoustic (velocity and televiewer) logs were obtained. The Conasauga Group at the study site is 572.4 m thick and comprises six formations that are - in descending stratigraphic order - Maynardville Limestone (98.8 m), Nolichucky Shale (167.9 m), Maryville Limestone (141.1 m), Rogersville Shale (39.6 m), Rutledge Limestone (30.8 m), and Pumpkin Valley Shale (94.2 m). The formations are lithologically complex, ranging from clastics that consist of shales, mudstones, and siltstones to carbonates that consist of micrites, wackestones, packstones, and conglomerates. The Rome Formation is 188.1 m thick and consists of variably bedded mudstones, siltstones, and sandstones. The Rome Formation thickness represents 88.1 m of relatively undeformed section and 100.0 m of highly deformed, jumbled, and partially repeated section. The bottom of the Rome Formation is marked by a tectonic disconformity that occurs within a 46-m-thick, intensely deformed interval caused by motion along the Copper Creek fault. Results from this study establish the stratigraphy and the lithology of the Conasauga Group and the Rome Formation near ORNL and, for the first time, allow for the unambiguous correlation of cores and geophysical logs from boreholes elsewhere in the ORNL vicinity. 45 refs., 26 figs., 2 tabs

Mesoarchean Banded Iron Formation sequences in Dixon Island-Cleaverville Formation, Pilbara Australia: Oxygenic signal from DXCL project

Science.gov (United States)

Kiyokawa, S.; Ito, T.; Ikehara, M.; Yamaguchi, K. E.; Naraoka, H.; Onoue, T.; Horie, K.; Sakamoto, R.; Aihara, Y.; Miki, T.

2013-12-01

The 3.2-3.1 Ga Dixon island-Cleaverville formations are well-preserved Banded Iron Formation (BIF) within hydrothermal oceanic sequence at oceanic island arc setting (Kiyokawa et al., 2002, 2006, 2012). The stratigraphy of the Dixon Island (3195+15Ma) -Cleaverville (3108+13Ma) formations shows the well preserved environmental condition at the Mesoarchean ocean floor. The stratigraphy of these formations are formed about volcano-sedimentary sequences with hydrothermal chert, black shale and banded iron formation to the top. Based on the scientific drilling of DXCL project at 2007 and 2011, detail lithology between BIF sequence was clearly understood. Four drilling holes had been done at coastal sites; the Dixon Island Formation is DX site (100m) and the Cleaverville Formation is CL2 (40m), CL1 (60m) and CL3 (200m) sites and from stratigraphic bottom to top. Coarsening and thickening upward black shale-BIF sequences are well preserved of the stratigraphy form the core samples. The Dixon Island Formation consists komatiite-rhyolite sequences with many hydrothermal veins and very fine laminated cherty rocks above them. The Cleaverville Formation contains black shale, fragments-bearing pyroclastic beds, white chert, greenish shale and BIF. The CL3 core, which drilled through BIF, shows siderite-chert beds above black shale identified before magnetite lamination bed. U-Pb SHRIMP data of the tuff in lower Dixon Island Formation is 3195+15 Ma and the pyroclastic sequence below the Cleaverville BIF is 3108+13 Ma. Sedimentation rate of these sequence is 2-8 cm/ 1000year. The hole section of the organic carbon rich black shales below BIF are similar amount of organic content and 13C isotope (around -30per mill). There are very weak sulfur MIF signal (less 0.2%) in these black shale sequence. Our result show that thick organic rich sediments may be triggered to form iron rich siderite and magnetite iron beds. The stratigraphy in this sequence quite resemble to other Iron

Krypton-81 in groundwater of the Culebra Dolomite near the Waste Isolation Pilot Plant, New Mexico.

Science.gov (United States)

Sturchio, Neil C; Kuhlman, Kristopher L; Yokochi, Reika; Probst, Peter C; Jiang, Wei; Lu, Zheng-Tian; Mueller, Peter; Yang, Guo-Min

2014-05-01

The Waste Isolation Pilot Plant (WIPP) in New Mexico is the first geologic repository for disposal of transuranic nuclear waste from defense-related programs of the US Department of Energy. It is constructed within halite beds of the Permian-age Salado Formation. The Culebra Dolomite, confined within Rustler Formation evaporites overlying the Salado Formation, is a potential pathway for radionuclide transport from the repository to the accessible environment in the human-disturbed repository scenario. Although extensive subsurface characterization and numerical flow modeling of groundwater has been done in the vicinity of the WIPP, few studies have used natural isotopic tracers to validate the flow models and to better understand solute transport at this site. The advent of Atom-Trap Trace Analysis (ATTA) has enabled routine measurement of cosmogenic (81)Kr (half-life 229,000 yr), a near-ideal tracer for long-term groundwater transport. We measured (81)Kr in saline groundwater sampled from two Culebra Dolomite monitoring wells near the WIPP site, and compared (81)Kr model ages with reverse particle-tracking results of well-calibrated flow models. The (81)Kr model ages are ~130,000 and ~330,000 yr for high-transmissivity and low-transmissivity portions of the formation, respectively. Compared with flow model results which indicate a relatively young mean hydraulic age (~32,000 yr), the (81)Kr model ages imply substantial physical attenuation of conservative solutes in the Culebra Dolomite and provide limits on the effective diffusivity of contaminants into the confining aquitards. Copyright © 2014 Elsevier B.V. All rights reserved.

Lithologic and hydrologic controls of mixed alluvial-bedrock channels in flood-prone fluvial systems: bankfull and macrochannels in the Llano River watershed, central Texas, USA

Science.gov (United States)

Heitmuller, Frank T.; Hudson, Paul F.; Asquith, William H.

2015-01-01

The rural and unregulated Llano River watershed located in central Texas, USA, has a highly variable flow regime and a wide range of instantaneous peak flows. Abrupt transitions in surface lithology exist along the main-stem channel course. Both of these characteristics afford an opportunity to examine hydrologic, lithologic, and sedimentary controls on downstream changes in channel morphology. Field surveys of channel topography and boundary composition are coupled with sediment analyses, hydraulic computations, flood-frequency analyses, and geographic information system mapping to discern controls on channel geometry (profile, pattern, and shape) and dimensions along the mixed alluvial-bedrock Llano River and key tributaries. Four categories of channel classification in a downstream direction include: (i) uppermost ephemeral reaches, (ii) straight or sinuous gravel-bed channels in Cretaceous carbonate sedimentary zones, (iii) straight or sinuous gravel-bed or bedrock channels in Paleozoic sedimentary zones, and (iv) straight, braided, or multithread mixed alluvial–bedrock channels with sandy beds in Precambrian igneous and metamorphic zones. Principal findings include: (i) a nearly linear channel profile attributed to resistant bedrock incision checkpoints; (ii) statistically significant correlations of both alluvial sinuosity and valley confinement to relatively high f (mean depth) hydraulic geometry values; (iii) relatively high b (width) hydraulic geometry values in partly confined settings with sinuous channels upstream from a prominent incision checkpoint; (iv) different functional flow categories including frequently occurring events (high f values (most ≤ 0.45) that develop at sites with unit stream power values in excess of 200 watts per square meter (W/m2); and (vi) downstream convergence of hydraulic geometry exponents for bankfull and macrochannels, explained by co-increases of flood magnitude and noncohesive sandy sediments that collectively

The use of the MCNP code for the quantitative analysis of elements in geological formations

Energy Technology Data Exchange (ETDEWEB)

Cywicka-Jakiel, T.; Woynicka, U. [The Henryk Niewodniczanski Institute of Nuclear Physics, Krakow (Poland); Zorski, T. [University of Mining and Metallurgy, Faculty of Geology, Geophysics and Environmental Protection, Krakow (Poland)

2003-07-01

The Monte Carlo modelling calculations using the MCNP code have been performed, which support the spectrometric neutron-gamma (SNGL) borehole logging. The SNGL enables the lithology identification through the quantitative analysis of the elements in geological formations and thus can be very useful for the oil and gas industry as well as for prospecting of the potential host rocks for radioactive waste disposal. In the SNGL experiment, gamma-rays induced by the neutron interactions with the nuclei of the rock elements are detected using the gamma-ray probe of complex mechanical and electronic construction. The probe has to be calibrated for a wide range of the elemental concentrations, to assure the proper quantitative analysis. The Polish Calibration Station in Zielona Gora is equipped with a limited number of calibration standards. An extension of the experimental calibration and the evaluation of the effect of the so-called side effects (for example the borehole and formation salinity variation) on the accuracy of the SNGL method can be done by the use of the MCNP code. The preliminary MCNP results showing the effect of the borehole and formation fluids salinity variations on the accuracy of silicon (Si), calcium (Ca) and iron (Fe) content determination are presented in the paper. The main effort has been focused on a modelling of the complex SNGL probe situated in a fluid filled borehole, surrounded by a geological formation. Track length estimate of the photon flux from the (n,gamma) interactions as a function of gamma-rays energy was used. Calculations were run on the PC computer with AMD Athlon 1.33 GHz processor. Neutron and photon cross-sections libraries were taken from the MCNP4c package and based mainly on the ENDF/B-6, ENDF/B-5 and MCPLIB02 data. The results of simulated experiment are in conformity with results of the real experiment performed with the use of the main lithology models (sandstones, limestones and dolomite). (authors)

The use of the MCNP code for the quantitative analysis of elements in geological formations

International Nuclear Information System (INIS)

Cywicka-Jakiel, T.; Woynicka, U.; Zorski, T.

2003-01-01

The Monte Carlo modelling calculations using the MCNP code have been performed, which support the spectrometric neutron-gamma (SNGL) borehole logging. The SNGL enables the lithology identification through the quantitative analysis of the elements in geological formations and thus can be very useful for the oil and gas industry as well as for prospecting of the potential host rocks for radioactive waste disposal. In the SNGL experiment, gamma-rays induced by the neutron interactions with the nuclei of the rock elements are detected using the gamma-ray probe of complex mechanical and electronic construction. The probe has to be calibrated for a wide range of the elemental concentrations, to assure the proper quantitative analysis. The Polish Calibration Station in Zielona Gora is equipped with a limited number of calibration standards. An extension of the experimental calibration and the evaluation of the effect of the so-called side effects (for example the borehole and formation salinity variation) on the accuracy of the SNGL method can be done by the use of the MCNP code. The preliminary MCNP results showing the effect of the borehole and formation fluids salinity variations on the accuracy of silicon (Si), calcium (Ca) and iron (Fe) content determination are presented in the paper. The main effort has been focused on a modelling of the complex SNGL probe situated in a fluid filled borehole, surrounded by a geological formation. Track length estimate of the photon flux from the (n,gamma) interactions as a function of gamma-rays energy was used. Calculations were run on the PC computer with AMD Athlon 1.33 GHz processor. Neutron and photon cross-sections libraries were taken from the MCNP4c package and based mainly on the ENDF/B-6, ENDF/B-5 and MCPLIB02 data. The results of simulated experiment are in conformity with results of the real experiment performed with the use of the main lithology models (sandstones, limestones and dolomite). (authors)

Quantification of soil loss in various lithological areas of the western Middle Atlas Central: application to the Ras-Elma, Tamelalet and Sebab watershed (Tigrigra watershed, Morocco)

Science.gov (United States)

Achiban, Hassan; Taous, Ali; El-Khantoury, Ismail; El Mderssa, Mohamed; Amechrouq, Ali

2018-05-01

The present study proposes to evaluate the extent of erosion according to the lithology in three sub-watersheds (Ras Elma, Sebab and Tamelalet) belonging to the Tigrigra basin and evolving in humid climatic context. The methodology adopts the revised universal soil loss equation (RUSLE). The results obtained make it possible to establish erosion class maps via GIS. A clear spatial difference in soil loss is observed, between the three sub-basins and in proportion to the lithology: on average 42.15 t/ha/year on Paleozoic schistose soils, against 17.06 t/ha/year on carbonate substrates Mesozoic and 8.46 t/ha/year on quaternary basalts. Correlations between soil loss and RUSLE factors are established. Soil infiltration regimes on different substrates are studied.

Tacuari formation (Nov. Nom.): Lithostratigraphy, facies, environment, age and geological significance (Cerro Largo - Uruguay)

International Nuclear Information System (INIS)

Veroslavsky, G.; De Santa Ana, H.; Daners, G.

2006-01-01

The definition of the Tacuari formation is proposed to group a set of glacial and fossiliferous siliciclastic rock deposited during the Upper proterozoic in the northeast of Uruguay. Up to this paper these lithologies were included in the San Gregorio formation (Carboniferous - Permian - Norte Basin). However, Leiosphaeridia tenuissima, L, minutissima, Myxcocooides distola, M, siderophila, Soldadophycus bossil and S. major were recorded in these rocks.This finded motivated the accomplishment of geological surveys that allowed to ferify the glacial origin of the Tacuari formation, to define its stratigraphic relationships and to corroborate its affectation by the Sierra Ballena shear zone. Two association of facies were recognized in the Tacuari formation: the base is represented by facies association A (outwash plains), characterized diamictites, sandostones and pelites; at the top, the facies association B (glaciomarine) includes a package of rhythmites with dropstones. On account of the tectonic setting, nature of sedimentation, age, and fossils, the definition of Tacuari formation constitutes a novel contribution to the regional evolutionary model of the Upper proterozoic. discussion of posible stratigraphc correlations with other neoproterozoic units of Western wondwana is also attempted

Lithological and structural bedrock model of the Haestholmen study site, Loviisa, SE Finland

International Nuclear Information System (INIS)

Front, K.; Paulamaeki, S.; Ahokas, H.; Anttila, P.

1999-10-01

The Haestholmen study site is located within the anorogenic Wiborg rapakivi granite batholith, 1640 1630 Ma in age. The bedrock consists of various rapakivi granites, which can be divided into three groups or lithological units: (1) wiborgite and pyterlite, (2) porphyritic rapakivi granite, and (3) even-grained or weakly porphyritic rapakivi granite, pyterlite being the dominant rock type. The evengrained and weakly porphyritic rapakivi granite has been interpreted to form a younger intrusive unit with a thickness of ca. 500 m, dipping approx. 20 deg to the NNW-NNE. Surface fractures form a distinct orthogonal system, with three perpendicular fracture directions: fractures dipping steeply (dip >75 deg) to the NE-SW and NW-SE plus subhorizontal (dip -3 m 2 /s to 1*10 -7 m 2 /s, the average being 1-10 -5 m 2 /s. (orig.)

Preliminary study of the favorability for uranium in the Madera Limestone, and Cutler and Chinle Formations of the Sierra Nacimiento-Jemez Mountains area, New Mexico

International Nuclear Information System (INIS)

Vizcaino, H.P.; O'Neill, A.J.; Dotterer, F.E.

1978-01-01

Small, surficial, secondary uranium deposits are present in several formations in the Sierra Nacimiento-Jemez Mountains region, but none of significant size are known. Field surveys indicate that the deposits are laterally discontinuous and are, in most cases, associated with carbonaceous debris. Mineral contents of as much as 0.18 percent U 3 O 8 are recorded. There are 2 known deposits in the Pennsylvanian Madera Limestone, 18 in the Permian Cutler Formation, and 3 in the Triassic Chinle Formation. The Madera Limestone consists of a lower and an upper member. The lower member is predominantly a dense limestone and is lithologically unfavorable. The upper member, which consists of several arkosic units interbedded with cherty limestone, is not a favorable host rock because of its thin arkosic units, the paucity of carbonaceous debris, and its lithologically unfavorable limestone. The Cutler Formation consists mostly of interfingering siltstones and fine- to coarse-grained feldspathic and arkosic sandstones of fluvial origin. The sandstones are generally lenticular, average about 40 ft in thickness, and are favorable. Cutler equivalents south of lat 36 0 N. (Abo and Yeso Formations) were not included in this study. The Chinle Formation in the project area consists of five members. The Agua Zarca Member, medium-grained to conglomeratic sandstone with beds that average 30 ft in thickness, is the only unit in the Chinle considered favorable. The stratigraphic units under consideration have been eroded and deformed; beds dip steeply. Upturned and deeply dissected beds afford access to infiltrating waters; oxidation and flushing of pre-existing uranium deposits is therefore suspected. The uranium deposits in the Madera, Cutler, and Chinle are likely to be remnants, and the probability of locating any large deposits within the area is therefore low

Petrographic and X-ray diffraction analyses of selected samples from Marker Bed 139 at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Fredrich, J.T.; Zeuch, D.H.

1996-04-01

The Waste Isolation Pilot Plant (WIPP) is located 660 m underground in the Salado Formation which consists of thick, horizontally bedded pure and impure salt and thin, laterally continuous clay and anhydrite interbeds. The Salado Two-Phase Flow Laboratory Program was established to provide site-specific-two-phase flow and other related rock properties to support performance assessment modeling of the WIPP repository. Owing to their potentially significant role in the hydrologic response of the repository, the program initially focused on the anhydrite interbeds, and in particular, on Marker Bed 139 (MB 139), which lies approximately 1 m below the planned waste storage rooms. This report synthesizes petrographic and X-ray powder diffraction studies performed to support the Salado Two-Phase Flow Laboratory Program. Experimental scoping activities in this area were performed in FY 1993 by three independent laboratories in order to: (1) quantify the mineral composition to support laboratory studies of hydrologic properties and facilitate correlation of transport properties with composition; (2) describe textures, including grain size; and (3) describe observed porosity. Samples from various depths were prepared from six 6-inch diameter cores which were obtained by drilling into the marker bed from the floor of two separate rooms. The petrographic analyses are augmented here with additional study of the original thin sections, and the pore structure observations are also examined in relation to an independent observational study of microcracks in Marker Bed 139 core samples performed in FY 1994 by the Geomechanics Department at Sandia National Laboratories

Petrographic and X-ray diffraction analyses of selected samples from Marker Bed 139 at the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Fredrich, J.T.; Zeuch, D.H. [Sandia National Labs., Albuquerque, NM (United States). Geomechanics Dept.

1996-04-01

The Waste Isolation Pilot Plant (WIPP) is located 660 m underground in the Salado Formation which consists of thick, horizontally bedded pure and impure salt and thin, laterally continuous clay and anhydrite interbeds. The Salado Two-Phase Flow Laboratory Program was established to provide site-specific-two-phase flow and other related rock properties to support performance assessment modeling of the WIPP repository. Owing to their potentially significant role in the hydrologic response of the repository, the program initially focused on the anhydrite interbeds, and in particular, on Marker Bed 139 (MB 139), which lies approximately 1 m below the planned waste storage rooms. This report synthesizes petrographic and X-ray powder diffraction studies performed to support the Salado Two-Phase Flow Laboratory Program. Experimental scoping activities in this area were performed in FY 1993 by three independent laboratories in order to: (1) quantify the mineral composition to support laboratory studies of hydrologic properties and facilitate correlation of transport properties with composition; (2) describe textures, including grain size; and (3) describe observed porosity. Samples from various depths were prepared from six 6-inch diameter cores which were obtained by drilling into the marker bed from the floor of two separate rooms. The petrographic analyses are augmented here with additional study of the original thin sections, and the pore structure observations are also examined in relation to an independent observational study of microcracks in Marker Bed 139 core samples performed in FY 1994 by the Geomechanics Department at Sandia National Laboratories.

The Pliocene Horcón Formation, Central Chile: a case study of earthquake-induced landslide susceptibility

Science.gov (United States)

Valdivia, D.; Elgueta, S.; Hodgkin, A.; Marquardt, C.; del Valle, F.; Yáñez Morroni, G.

2017-12-01

Stability slope analysis is typically focused on modeling using cohesion and friction angle parameters but in earthquake-induced landslides, susceptibility is correlated more to lithological and stratigraphic parameters. In sedimentary deposits whose cohesion and diagenesis are very low, the risk of landslides increases. The Horcón Formation, which crops out continuously along cliffs in Central Chile between 32.5° and 33°S, is a Miocene-Pliocene well preserved, horizontally stratified unit composed of marine strata which overlies Paleozoic-Mesozoic igneous basement. During the Quaternary, the sequence was tectonically uplifted 80 meters and covered by unconsolidated eolian deposits. Given that Seismotectonic and Barrier-Asperity models suggest the occurrence of a forthcoming megathrust earthquake in a segment which includes this area, the Horcón Formation constitutes a good case study to characterize the susceptibility of this type of sediment for mass movements triggered by earthquakes. Field mapping, stratigraphic and sedimentological studies, including petrographic analyses to determine lithological composition and paragenesis of diagenetic events, have been carried out along with limited gravimetric profiling and CPTU drill tests. High resolution digital elevation modeling has also been applied. This work has led to the recognition of a shallow marine lithofacies association composed of weakly lithified fossiliferous and bioturbated medium to fine grained litharenite, mudstone, and fine conglomerate. The low grade of diagenesis in the sedimentary deposits was in response to a short period of burial and a subsequent accelerated uplift evidenced along the coast of Chile during the Quaternary. We have generated a predictive model of landslide susceptibility for the Horcón Formation and for the overlying Quaternary eolian deposits incorporating variables such as composition and diagenesis of lithofacies, slope, structures, weathering and landcover. The model

Salt dissolution and collapse at the Wink Sink in West Texas

International Nuclear Information System (INIS)

Johnson, K.S.

1986-06-01

The Wink Sink, in Winkler County, Texas, is a collapse feature that formed in June 1980 when an underground dissolution cavity migrated upward by successive roof failures until it breached the land surface. The original cavity developed in the Permian Salado Formation salt beds more than 1300 feet below ground level. Natural dissolution of salt occurred in the vicinity of the Wink Sink in several episodes that began as early as Salado time and recurred in later Permian, Triassic, and Cenozoic time. Although natural dissolution cavity and resultant collapse were influenced by petroleum production activity in the immediate area. Drilling, completion, and plugging procedures used on an abandoned oil well at the site of the sink appear to have created a conduit that enabled water to circulate down the borehole and dissolve the salt. When the dissolution cavity became large enough, the roof failed and the overlying rocks collapsed into the cavity. Similar collapse features exist where underground salt beds have been intentionally dissolved during solution mining or accidentally dissolved as a result of petroleum production activities

Calculation of density and permeability of compacted crushed salt within an engineered shaft sealing system

International Nuclear Information System (INIS)

Loken, M.; Statham, W.

1997-01-01

Crushed salt from the host Salado Formation is proposed as a sealing material in one component of a multicomponent seal system design for the shafts of the Waste Isolation Pilot Plant (WIPP), a mined geological repository for storage and disposal of transuranic radioactive wastes located near Carlsbad, New Mexico. The crushed salt will be compacted and placed at a density approaching 90% of the intact density of the host Salado salt. Creep closure of the shaft will further compact the crushed salt over time, thereby reducing the crushed-salt permeability from the initial state and creating an effective long-term seal. A structural model and a fluid flow model have been developed to provide an estimate of crushed-salt reconsolidation rate as a function of depth, time, and pore pressure. Model results are obtained in terms of crushed-salt permeability as a function of time and depth within the salt column. Model results indicate that average salt column permeability will be reduced to 3.3 x 10 -20 m 2 in about 100 years, which provides for an acceptable long-term seal component

U-Pb SHRIMP ages of volcanic zircons from the Merrions and Turondale Formations, New South Wales, and the early devonian time-scale: a biostratigraphic and sedimentological assessment

International Nuclear Information System (INIS)

Packham, G.H.

2003-01-01

U-Pb ages for volcanic zircons from the Lower Devonian Turondale and Merrions Formations initially dated by Jagodzinski and Black (1999) have been recalculated by Compston (2000, 2001). The Turondale, Waterbeach and Merrions Formations are, in ascending stratigraphic order, three of the Lower Devonian deep-water formations of the Hill End Trough. The recent discovery of a Lochkovian conodont fauna of the delta zone in derived limestone blocks from the uppermost beds of the Turondale Formation has established a maximum age for that horizon. The principal lithological assemblages of the formations are volcanic (megaturbidite and lavas), epiclastic turbidites and essentially hemipelagic lithologies. The mean zircon ages, determined by Sensitive High-Resolution Ion MicroProbe (SHRIMP), suggest a long duration for the Merrions Formation, 615 m thick and 91% volcanic, and a very much shorter interval for the upper two-thirds of the Turondale Formation, 360 m thick and 34% volcanic, plus the intervening non-volcanic Waterbeach Formation, 512 m thick. A sedimentological model based on scaled depositional rates for the facies has been used to estimate the relative accumulation rates and durations of the succession from the base of the Turondale Formation to the top of the Merrions Formation The model indicates that the Merrions Formation accumulated in a much shorter time than the interval from the top of the lower Turondale Formation to the base of the Merrions Formation. The analytical uncertainties of the Jagodzinski and Black (1999) zircon ages are large enough to be compatible with the sedimentological model, but the smaller analytical uncertainties calculated by Compston (2000, 2001) fall far from the scaled sedimentological model. Grouping together of the lower Merrions Formation and lower Turondale Formation zircon dates in Compston (2000) for a single mid-Lochkovian age is in conflict with the biostratigraphic and sedimentological evidence available and the derived

Methods and apparatus for measurement of electronic properties of geological formations through borehole casing

Science.gov (United States)

Vail, W.B. III.

1989-11-21

Methods and apparatus are provided for measuring electronic properties of geological formations and cement layers adjacent to cased boreholes including resistivities, polarization phenomena and dielectric constants. Current is passed from an electrode in electrical contact with the interior of the borehole casing to an electrode on the surface of the earth. At least three voltage measuring electrodes in electrical contact with the interior of the casing measure the voltage at various points thereon. The voltage differences between discrete pairs of the voltage measuring electrodes provide a measurement of differential current conducted into formation in the vicinity of those electrodes. These measurements facilitate calculation of the resistivities of the adjacent geological formations as well as an indication of whether cement is present. Measurements of the differential voltage response to transient currents provide a measurement of the polarization phenomena in formation as well as the capacitance of the casing in contact with the formation which is useful for determining whether oil and gas are present. Lithological characteristics of the formation such as the presence or absence of clay can also be determined. A calibration procedure is provided for minimizing errors induced by variations in the casing. The device also may be placed within the pipe attached to a drill bit while drilling open holes. 48 figs.

Formation and mechanism of the abnormal pressure zone and its relation to oil and gas accumulations in the Eastern Jiuquan Basin, northwest China

Institute of Scientific and Technical Information of China (English)

陈建平; 黄第藩

1996-01-01

Three abnormal overpressure zoes with a planar top at different depths occur in the Ying’er Depression in the Eastern Jiuquan Basin. The distance and the temperature difference between them are about 1 000 m and 30℃, respectively. The studies of sedimentary history, nature of formation water, variation of geothermal gradient and examination of thin sections, and the relationship between lithologic section and formation pressure show that there are conditions for formation of abnormal overpressure zones in the Ying’er Depression. Aquathermal pressuring and the overlying sediment load are main factors forming the abnormal overpressure zones. The study indicates that most of oil and gas in the Ying’er Depression accumulated in reservoirs above or under the seals or in the top of the compartments.

Soft-sediment deformation in a tectonically active area: The Plio-Pleistocene Zarzal Formation in the Cauca Valley (Western Colombia)

Science.gov (United States)

Neuwerth, Ralph; Suter, Fiore; Guzman, Carlos A.; Gorin, Georges E.

2006-04-01

The Plio-Pleistocene Zarzal Formation corresponds to fluvio-lacustrine sediments deposited in an intramontane depression within the Colombian Andes, associated with the Cauca-Romeral Fault System. It crops out mainly in the Cauca Valley where numerous field sections have permitted the mapping of the vertical and lateral lithological variations. Lacustrine deposits of sands, silts, clays and diatomites are interbedded with fluvial sand and gravel beds and fluvio-volcanic mass flows derived from the volcanic Central Cordillera. Numerous soft-sediment deformation structures are encountered in this formation, particularly in fine- to medium-grained sands, silts and clays: load structures (load casts, flame structures, pseudonodules), water escape structures (water escape cusps, dish-and-pillar and pocket-and-pillar structures), soft-sediment intrusions (clastic sills and dykes), disturbed laminites, convolute laminations, slumps and synsedimentary faulting. Deformation mechanisms and driving forces are related essentially to gravitational instabilities, dewatering, liquidization and brittle deformations. Field and regional geological data show that most of these deformations are related to seismicity and can be interpreted as seismites. This area has a geological and recent seismic history and outcrops show both syn- and post-depositional faulting related to the transpressional regime of this part of the Colombian Andes, which generates strike-slip faults and associated local normal faults. The drainage pattern within the Zarzal Formation shows the signature of neotectonics. Moreover, the fine to coarse-grained sands of the Zarzal Formation are lithologies prone to liquefaction when affected by seismic waves. The intercalation of the deformed intervals within undisturbed strata confirms the catastrophic nature of the events. Finally, the large areal extent of the deformations and the type of structures are compatible with seismites. Consequently, the existence of

Nanggulan Formation and Its Problem As a Basement in Kulonprogo Basin, Yogyakarta

Directory of Open Access Journals (Sweden)

Hill Gendoet Hartono

2017-03-01

Full Text Available DOI: 10.17014/ijog.4.2.71-80Nanggulan Formation consists of the oldest clastic rock sequence exposed in Kulonprogo area, Yogyakarta. This paper discusses the position of Nanggulan Formation as a basement. The method used in this research is surface and subsurface investigations based on gravity surveys. The rock assemblage is exposed and distributed partly in the east flank of Kulonprogo Mountains with weak undulated morphology. The rock sequence is composed of sand to clay grain sizes such as sandstone, quartz sandstone, calcareous sandstone, claystone, fossiliferous claystone, calcareous claystone, siltstone, and coal seam intercalations. The total thickness of the sequence is less than 200 m. Based on the fossil and palynology investigations, previous investigators concluded the age of the rock was Eocene to Middle Miocene. The geological structures developed in the rocks are the lithological stratification, fractures, folding, and faulting. The subsurface interpretation based on gravity data revealed the rock was located under the andesite breccias with 2.44 g/cc density. The density of the rock sequence was 2.63 g/cc. The gravity interpretation shows a strong indication that Nanggulan Formation underlies the andesitic breccias presumably associated with Old Andesite Formation exposed in Kulonprogo Mountains. The limited distribution, the thickness, and the closed environmental deposition of Nanggulan Formation found in the present investigation raised problems on the position of the formation as the basement of Old Andesite Formation occurring in the Kulonprogo Mountain.

The influence of lithology on surface water sources | Science ...

Science.gov (United States)

Understanding the temporal and spatial variability of surface water sources within a basin is vital to our ability to manage the impacts of climate variability and land cover change. Water stable isotopes can be used as a tool to determine geographic and seasonal sources of water at the basin scale. Previous studies in the Coastal Range of Oregon reported that the variation in the isotopic signatures of surface water does not conform to the commonly observed “rainout effect”, which exhibits a trend of increasing isotopic depletion with rising elevation. The primary purpose of this research is to investigate the mechanisms governing seasonal and spatial variations in the isotopic signature of surface waters within the Marys River Basin, located in the leeward side of the Oregon Coastal Range. Surface water and precipitation samples were collected every 2-3 weeks for isotopic analysis of δ18O and δ2H for one year. Results indicate a significant difference in isotopic signature between watersheds underlain by basalt and sandstone. The degree of separation was the most distinct during the summer when low flows reflect deeper groundwater sources, whereas isotopic signatures during the rainy season (fall and winter) showed a greater degree of similarity between the two lithologies. This indicates that baseflow within streams drained by sandstone versus basalt is being supplied from two distinctly separate water sources. In addition, Marys River flow at the outle

Lithologic Control on the Form of Soil Mantled Hillslopes

Science.gov (United States)

Johnstone, S. A.; Hilley, G. E.

2014-12-01

Slopes on steady-state soil-mantled hillslopes tend to increase downslope in a way that balances local transport capacity with the sediment supplied from progressively larger source areas. Most predictions for the transport of soil depend purely on topographic slope and constants. Thus, soil mantled topography should evolve toward smooth forms in which soils act to buffer these forms from the underlying geologic structure. However, in the Gabilan Mesa, CA, oscillations in the slope of soil-mantled hillslopes mirror oscillations in the underlying stratigraphy. Using field measurements of stratigraphy and soil depths, topographic analysis, and numerical modeling, we demonstrate that variations in rock type can impact the form of soil-mantled hillslopes. Specifically, variations in the properties of underlying rocks may yield different soil thicknesses. Balancing transport rates across these variations in thickness requires slopes to change when soil transport depends on both soil thickness and slope. A compilation of published data on the variation in activity with depth of various transport processes provides the basis for a geomorphic transport law (GTL) that generalizes the depth dependence of various transport processes. While this GTL is explicitly depth dependent, it is also capable of describing situations in which hillslope transport is relatively insensitive to variations in thickness and therefore essentially equivalent to existing formulations. We use dimensional analysis and numerical modeling to demonstrate the conditions under which transport on soil mantled slopes, and consequently topographic forms, may be sensitive to variations in soil thickness and therefore lithology.

Lithologic and hydrologic controls of mixed alluvial-bedrock channels in flood-prone fluvial systems: bankfull and macrochannels in the Llano River watershed, central Texas, USA

Science.gov (United States)

Heitmuller, Frank T.; Hudson, Paul F.; Asquith, William H.

2015-01-01

The rural and unregulated Llano River watershed located in central Texas, USA, has a highly variable flow regime and a wide range of instantaneous peak flows. Abrupt transitions in surface lithology exist along the main-stem channel course. Both of these characteristics afford an opportunity to examine hydrologic, lithologic, and sedimentary controls on downstream changes in channel morphology. Field surveys of channel topography and boundary composition are coupled with sediment analyses, hydraulic computations, flood-frequency analyses, and geographic information system mapping to discern controls on channel geometry (profile, pattern, and shape) and dimensions along the mixed alluvial-bedrock Llano River and key tributaries. Four categories of channel classification in a downstream direction include: (i) uppermost ephemeral reaches, (ii) straight or sinuous gravel-bed channels in Cretaceous carbonate sedimentary zones, (iii) straight or sinuous gravel-bed or bedrock channels in Paleozoic sedimentary zones, and (iv) straight, braided, or multithread mixed alluvial–bedrock channels with sandy beds in Precambrian igneous and metamorphic zones. Principal findings include: (i) a nearly linear channel profile attributed to resistant bedrock incision checkpoints; (ii) statistically significant correlations of both alluvial sinuosity and valley confinement to relatively high f (mean depth) hydraulic geometry values; (iii) relatively high b (width) hydraulic geometry values in partly confined settings with sinuous channels upstream from a prominent incision checkpoint; (iv) different functional flow categories including frequently occurring events (< 1.5-year return periods) that mobilize channel-bed material and less frequent events that determine bankfull channel (1.5- to 3-year return periods) and macrochannel (10- to 40-year return periods) dimensions; (v) macrochannels with high f values (most ≤ 0.45) that develop at sites with unit stream power values in excess

An evaluation of the suitability of ERTS data for the purposes of petroleum exploration. [lithology and geological structure of Anadarko Basin of Oklahoma and Texas

Science.gov (United States)

Collins, R. J. (Principal Investigator); Mccown, F. P.; Stonis, L. P.; Petzel, G. J.; Everett, J. R.

1974-01-01

The author has identified the following significant results. ERTS-1 data give exploration geologists a new perspective for looking at the earth. The data are excellent for interpreting regional lithologic and structural relationships and quickly directing attention to areas of greatest exploration interest. Information derived from ERTS data useful for petroleum exploration include: linear features, general lithologic distribution, identification of various anomalous features, some details of structures controlling hydrocarbon accumulation, overall structural relationships, and the regional context of the exploration province. Many anomalies (particularly geomorphic anomalies) correlate with known features of petroleum exploration interest. Linears interpreted from the imagery that were checked in the field correlate with fractures. Bands 5 and 7 and color composite imagery acquired during the periods of maximum and minimum vegetation vigor are best for geologic interpretation. Preliminary analysis indicates that use of ERTS imagery can substantially reduce the cost of petroleum exploration in relatively unexplored areas.

Remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Slick Rock, Colorado: Appendix B to Attachment 3, lithologic logs

International Nuclear Information System (INIS)

1994-03-01

This appendix contains the lithologic logs and monitor well construction information for the remedial action plan for uranium mill tailings sites at Slick Rock, CO. Data from each borehole is presented graphically and a stratigraphic description is given

Lithological discrimination of accretionary complex (Sivas, northern Turkey) using novel hybrid color composites and field data

Science.gov (United States)

Özkan, Mutlu; Çelik, Ömer Faruk; Özyavaş, Aziz

2018-02-01

One of the most appropriate approaches to better understand and interpret geologic evolution of an accretionary complex is to make a detailed geologic map. The fact that ophiolite sequences consist of various rock types may require a unique image processing method to map each ophiolite body. The accretionary complex in the study area is composed mainly of ophiolitic and metamorphic rocks along with epi-ophiolitic sedimentary rocks. This paper attempts to map the Late Cretaceous accretionary complex in detail in northern Sivas (within İzmir-Ankara-Erzincan Suture Zone in Turkey) by the analysis of all of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) bands and field study. The new two hybrid color composite images yield satisfactory results in delineating peridotite, gabbro, basalt, and epi-ophiolitic sedimentary rocks of the accretionary complex in the study area. While the first hybrid color composite image consists of one principle component (PC) and two band ratios (PC1, 3/4, 4/6 in the RGB), the PC5, the original ASTER band 4 and the 3/4 band ratio images were assigned to the RGB colors to generate the second hybrid color composite image. In addition to that, the spectral indices derived from the ASTER thermal infrared (TIR) bands discriminate clearly ultramafic, siliceous, and carbonate rocks from adjacent lithologies at a regional scale. Peridotites with varying degrees of serpentinization illustrated as a single color were best identified in the spectral indices map. Furthermore, the boundaries of ophiolitic rocks based on fieldwork were outlined in detail in some parts of the study area by superimposing the resultant maps of ASTER maps on Google Earth images of finer spatial resolution. Eventually, the encouraging geologic map generated by the image analysis of ASTER data strongly correlates with lithological boundaries from a field survey.

Utilizing Integrated Prediction Error Filter Analysis (INPEFA) to divide base-level cycle of fan-deltas: A case study of the Triassic Baikouquan Formation in Mabei Slope Area, Mahu Depression, Junggar Basin, China

Science.gov (United States)

Yuan, Rui; Zhu, Rui; Qu, Jianhua; Wu, Jun; You, Xincai; Sun, Yuqiu; Zhou, Yuanquan (Nancy)

2018-05-01

The Mahu Depression is an important hydrocarbon-bearing foreland sag located at the northwestern margin of the Junggar Basin, China. On the northern slope of the depression, large coarse-grained proximal fan-delta depositional systems developed in the Lower Triassic Baikouquan Formation (T1b). Some lithologic hydrocarbon reservoirs have been found in the conglomerates of the formation since recent years. However, the rapid vertical and horizontal lithology variations make it is difficult to divide the base-level cycle of the formation using the conventional methods. Spectral analysis technologies, such as Integrated Prediction Error Filter Analysis (INPEFA), provide another effective way to overcome this difficultly. In this paper, processed by INPEFA, conventional resistivity logs are utilized to study the base-level cycle of the fan-delta depositional systems. The negative trend of the INPEFA curve indicates the base-level fall semi-cycles, adversely, positive trend suggests the rise semi-cycles. Base-level cycles of Baikouquan Formation are divided in single and correlation wells. One long-term base-level rise semi-cycle, including three medium-term base-level cycles, is identified overall the Baikouquan Formation. The medium-term base-level cycles are characterized as rise semi-cycles mainly in the fan-delta plain, symmetric cycles in the fan-delta front and fall semi-cycles mainly in the pro-fan-delta. The short-term base-level rise semi-cycles most developed in the braided channels, sub-aqueous distributary channels and sheet sands. While, the interdistributary bays and pro-fan-delta mud indicate short-term base-level fall semi-cycles. Finally, based on the method of INPEFA, sequence filling model of Baikouquan formation is established.

Microfacies, sedimentary environment and diagenesis of the upper part of Dalan and Kangan Formations in the Kuh-e Surmeh area, Folded Zagros

Directory of Open Access Journals (Sweden)

Mohammadhossein Adabi

2012-01-01

Full Text Available The upper part of Dallan and Kangan formations (Permian-Triassic, are located in the Kuh-e Surmeh area in folded Zagros Basin with a thickness of 325 m overlying by Nar evaporite member and underlying by Dashtak Formation. Dominant lithology of these formations are limestone and dolomite. Our purpose in this study is to identify microfacieses, sedimentary environment and diagenetic proceses. To overcome this aim, thin sections petrographic studies, leaded to identify 12 microfacieses related to 4 facieses belt: tidal flat, lagoon, shoal and open marine. The observed microfacies patterns indicate a ramp carbonate platform as depositional environment. Based on petrographic studies, the important diagenetic processes in these formations consist of: micritization, dolomitization, cementation, stilolitization and chemical and physical compactions. Burial diagenesis is dominated diagenetic event. The observed porosities in this section are primary and secondary such as fenestral, vuggy, fracture, moldic, interparticle, intraparticle and channel

PALAEOENVIRONMENTAL INTERPPRETATION OF THE LATE TRIASSIC FRAELE FORMATION (ORTLES NAPPE, AUSTROALPINE DOMAIN, LOMBARDY

Directory of Open Access Journals (Sweden)

FABRIZIO BERRA

1997-03-01

Full Text Available The Fraele Formation crops out in the Ortles Nappe (upper Valtellina, Northern Italy, structurally part of the Central Austroalpine Domain. It consists of fine siliciclastics alternating with carbonates, mostly limestones,rare dolostones and marls. The formation differs lithologically from the underlying Norian Dolomia del Cristallo because of different paleonvironmental evolution.The change in environmental parameters was controlled mainly by a climatic change to more humid conditions.This favoured on one hand the mobilisation and trasport by rivers of siliciclastic material from the continent to the Tethys gulf,and on the other influenced the sea-water chemistry.Freshwater influxes lowered salinity and inhibited early dolomitisation. Input of low density freshwater resulted in the astablishment of a permanent water mass stratification which influenced the benthic life. This paleoenvironmental reconstruction fits with the sudden clastic input which occurred in several palaeogeographic domains of the western Tethys realm (Austroalpine, Southalpine, Apennine, Hungary, Poland, Slovakia during the Late Norian.  

Depositional History and Sequence Stratigraphy of the Middle Ordovician Yeongheung Formation (Yeongweol Group), Taebaeksan Basin, mid-east Korea

Science.gov (United States)

Kwon, Yoo Jin; Kwon, Yi Kyun

2017-04-01

The Middle Ordovician Yeongheung Formation consists of numerous meter-scale, shallowing-upward cycles which were deposited on a shallow-marine carbonate platform. Many diagnostic sedimentary textures and structures such as supratidal laminite, tepee structure, and solution-collapsed breccia are observed, which enable to infer the dry climate and high salinity conditions during deposition of the formation. In order to understand its depositional history, this study focuses on vertical and spatial stacking patterns of the second- to third-order sequences through the detailed outcrop description and geologic mapping. A total 19 lithofacies have been recognized, which can be grouped into 5 facies associations (FAs): FA1 (Supratidal flat), FA2 (Supratidal or dolomitization of peritidal facies), FA3 (Intertidal flat), FA4 (Shallow subtidal to peritidal platform), FA5 (Shallow subtidal shoal). Global mega-sequence boundary (Sauk-Tippecanoe) occurs in solution-collapsed breccia zone in the lower part of the formation. Correlation of the shallowing-upward cycle stacking pattern across the study area defines 6 transgressive-regressive depositional sequences. Each depositional sequences comprises a package of vertical and spatial staking of shallow subtidal cycles in the lower part and peritidal cycles in the upper part of the formation. According to sequence stratigraphic interpretation, the reconstructed relative sea-level curve of the Yeongweol platform is very similar to that of the Taebaek platform. Based on the absence of siliciclastic sequence such as the Jigunsan Formation and the lithologic & stratigraphic differences, however, the Yeongweol and Taebaek groups might not belong to a single depositional system within the North China platform. The Yeongweol Group can be divided by the four subunits into their unique lithologic successions and geographic distributions. The Eastern subunit of the Yeongweol Group is composed dominantly of carbonate rocks with a high

Geochronology and geochemistry of lithologies of the Tabuaço W-prospect area (Northern Portugal)

Science.gov (United States)

Cerejo, Tiago; Francisco Santos, Jose; Sousa, Joao Carlos; Castanho, Nuno; Sergio, Gabriel; Ribeiro, Sara

2016-04-01

This work is focussed on lithologies occurring at Quinta de São Pedro das Águias, which is located in the Tabuaço prospect (an area of 45 km2 where exploration for W-skarn deposits is taking place, in northern Portugal, close to the Douro valley). At Quinta de São Pedro das Águias several lithologies are recognized: "normal" phyllites, black phyllites (graphite-bearing), marbles, calcsilicate (s.s.) rocks and skarns (sometimes, scheelite-bearing), belonging to the Bateiras Formation, of the Douro Group (one of the two major subdivisions of the Neoproterozoic-Cambrian Dúrico-Beirão Supergroup); Paredes da Beira-Tabuaço granite; several aplitic and pegmatitic bodies. The studied area belongs to the Central Iberian Zone, a geotectonic unit of the Iberian Variscan Chain. Rb-Sr isotope analyses done in the scope of this work, provided a 316 ± 7 Ma whole-rock isochron (MSWD = 1.7; initial 87Sr/86Sr = 0.7146) for the granitoids, using the 87Rb decay constant recently recommended by IUPAC-IUGS (Villa et al., 2015). This date is interpreted here as the emplacement age of those rocks, during a late stage of the Variscan D3. The granite revealed a S-type nature, namely because it is a muscovite granite, it shows a peraluminous composition (average A/CNK = 1.28), and the Sr and Nd isotope fingerprints (-8.9 ≤ ɛNd(316Ma) ≤ -7.8; +0.7105 ≤ 87Sr/86Sr(316Ma) ≤ 0.7182) fit into the composition of metasedimentary crust. The analysed phyllites show the following isotopic compositions: -9.7 ≤ ɛNd(316Ma) ≤ -8.2; +0.7148 ≤ 87Sr/86Sr(316Ma) ≤ 0.7188. Therefore, the isotope signatures, at 316 Ma, of the granite and of the studied metapelites overlap, suggesting that the parental magma was generated by anatexis of Grupo do Douro metasediments. According to their petrographic, geochemical and isotopic features, aplites and pegmatites are viewed as extreme differentiates from the granite. São Pedro das Águias metapelites show biotite zone parageneses

Conceptual plan: Two-Phase Flow Laboratory Program for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Howarth, S.M.

1993-07-01

The Salado Two-Phase Flow Laboratory Program was established to address concerns regarding two-phase flow properties and to provide WIPP-specific, geologically consistent experimental data to develop more appropriate correlations for Salado rock to replace those currently used in Performance Assessment models. Researchers in Sandia's Fluid Flow and Transport Department originally identified and emphasized the need for laboratory measurements of Salado threshold pressure and relative permeability. The program expanded to include the measurement of capillary pressure, rock compressibility, porosity, and intrinsic permeability and the assessment of core damage. Sensitivity analyses identified the anhydrite interbed layers as the most likely path for the dissipation of waste-generated gas from waste-storage rooms because of their relatively high permeability. Due to this the program will initially focus on the anhydrite interbed material. The program may expand to include similar rock and flow measurements on other WIPP materials including impure halite, pure halite, and backfill and seal materials. This conceptual plan presents the scope, objectives, and historical documentation of the development of the Salado Two-Phase Flow Program through January 1993. Potential laboratory techniques for assessing core damage and measuring porosity, rock compressibility, capillary and threshold pressure, permeability as a function of stress, and relative permeability are discussed. Details of actual test designs, test procedures, and data analysis are not included in this report, but will be included in the Salado Two-Phase Flow Laboratory Program Test Plan pending the results of experimental and other scoping activities in FY93

Variation in stable carbon isotopes in organic matter from the Gunflint Iron Formation

International Nuclear Information System (INIS)

Barghoorn, E.S.; Knoll, A.H.; Dembicki, H. Jr.; Meinschein, W.G.

1977-01-01

In order to examine possible variations in organic carbon isotopic ratios within a single Precambrian formation, the kerogen separated from 15 samples of the approximately 2000 m.y. old Gunflint Iron Formation and the conformably overlying Rove Formation, representing a wide range of lithologies and geographic localities, was isotopically analyzed. From the resulting data, four conclusions can be drawn: (1) delta 13 C values of the shallow water algal chert facies are significantly more negative (-25 to -30 parts per thousand) than those of the deeper water chert-carbonate and taconite facies (-15 to -20 parts per thousand). Comparative data for modern marine algal mats shows a range of delta 13 C values from -8.4 to -19 parts per thousand PDB. Values obtained for fresh water mats were slightly more negative. (2) These differences in isotopic ratios can be correlated with similar differences in preserved microbiotas. (3) Anthraxolite lenses are depleted in 13 C relative to the reduced carbon in surrounding sediments. (4) The effect of Keweenawan diabase intrusions upon the carbon isotopic composition is pronounced, but limited to the immediate vicinity of the contact. (author)

Origin of acid orthoderived and paraderived geologic formations of the central part of the province of Limousin (France). A possible source for uraniferous leucogranite

International Nuclear Information System (INIS)

Bourguignon, A.

1988-01-01

Important metamorphic formations of the central part of the province of Limousin are studied by chemical investigations for characterization of their primary signature. Four large orthoderived formations are compared: Dronne, Meuzac, and Thaurion arcs and leptynite formations. The typology of the parent magmatism of orthogneiss and leptynite allows to find leack most of plutonic associations known in the Variscan chain (subalkaline, calcoalkaline, aluminous). Interpretation of primary geochemical fractionation in rocks from the Dronne are suggests cogenetism of the whole facies following a fractionated crystallization process. Moreover rocks from the Dronne arc have a peraluminous character with high U and Th content related to subalkaline magmatism which make of them a potential source of uraniferous peraluminous leucogranites. Paraderived formations are represented by 3 mica schist formations and 2 gneiss formations. Each unit is individualized by geochemical study of mica schist. Gneiss formation are chemically distinct. These differences confirm that they belong to distinct lithologic units. Trace elements are used to precise the paleogeotectonic context of original sediment deposition [fr

Configuration of the mudstones, gray- and coffee-colored shale lithologic units, zones of silica and epidote, and their relation to the tectonics of the Cerro Prieto geothermal field

Energy Technology Data Exchange (ETDEWEB)

Cobo R, J.M.

1981-01-01

Based on well cuttings, five lithological units have been recognized within the area of what is now the Cerro Prieto geothermal field. These five units are described. Differences in origin, mineralogy, grading, color, compaction, etc., are shown.

Thermodynamic Properties of Magnesium Chloride Hydroxide Hydrate (Mg3Cl(OH)5:4H2O, Phase 5), and Its importance to Nuclear Waste Isolation in Geological Repositories in Salt Formations

Science.gov (United States)

Xiong, Y.; Deng, H.; Nemer, M. B.; Johnsen, S.

2009-12-01

MgO (bulk, pure MgO corresponding to the mineral periclase) is the only engineered barrier certified by the Environmental Protection Agency for emplacement in the Waste Isolation Pilot Plant (WIPP) in the US, and an Mg(OH)2-based engineered barrier (bulk, pure Mg(OH)2 corresponding to brucite) is to be employed in the Asse repository in Germany. Both the WIPP and the Asse are located in salt formations. The WIPP is a U.S. Department of Energy geological repository being used for the permanent disposal of defense-related transuranic waste (TRU waste). The repository is 655 m below the surface, and is situated in the Salado Formation, a Permian salt bed mainly composed of halite, and of lesser amounts of polyhalite, anhydrite, gypsum, magnesite, clays and quartz. The WIPP Generic Weep Brine (GWB), a Na-Mg-Cl dominated brine, is associated with the Salado Formation. The previous vendor for MgO for the WIPP was Premier Chemicals and the current vendor is Martin Marietta Materials. Experimental studies of both Premier MgO and Martin Marietta MgO with the GWB at SNL indicate the formation of magnesium chloride hydroxide hydrate, Mg3Cl(OH)5:4H2O, termed as phase 5. However, this important phase is lacking in the existing thermodynamic database. In this study, the solubility constant of phase 5 is determined from a series of solubility experiments in MgCl2-NaCl solutions. The solubility constant at 25 oC for the following reaction, Mg3Cl(OH)5:4H2O + 5H+ = 3Mg2+ + 9H2O(l) + Cl- is recommended as 43.21±0.33 (2σ) based on the Specific Interaction Theory (SIT) model for extrapolation to infinite dilution. The log K obtained via the Pitzer equations is identical to the above value within the quoted uncertainty. The Gibbs free energy and enthalpy of formation for phase 5 at 25 oC are derived as -3384±2 (2σ) kJ mol-1 and -3896±6 (2σ) kJ mol-1, respectively. The standard entropy and heat capacity of phase 5 at 25 oC are estimated as 393±20 J mol-1 K-1 and 374±19 J mol-1 K

Investigating Microbial Biofilm Formations on Crustal Rock Substrates

Science.gov (United States)

Weiser, M.; D'Angelo, T.; Carr, S. A.; Orcutt, B.

2017-12-01

Ocean crust hosts microbial life that, in some cases, alter the component rocks as a means of obtaining energy. Variations in crust lithology, included trace metal and mineral content, as well as the chemistry of the fluids circulating through them, provide substrates for some microbes to metabolize, leading to formation of biofilm community structures. Microbes have different parameters for the situations in which they will form biofilms, but they must have some source of energy in excess at the site of biofilm formation for them to become stationary and form the carbohydrate-rich structures connecting the cells to one another and the substrate. Generally, the requirements for microbes to form biofilms on crustal minerals are unclear. We designed two experiments to test (1) mineral preference and biofilm formation rates by natural seawater microbial communities, and (2) biofilm development as a function of phosphate availability for an organism isolated from subseafloor ocean crust. In Experiment 1, we observed that phyric basalt groundmass is preferentially colonized over aphyric basalt or metal sulfides in a shallow water and oxic seawater environment. In experiment 2, tests of the anaerobic heterotroph Thalassospira bacteria isolated from oceanic crustal fluids showed that they preferentially form biofilms, lose motility, and increase exponentially in number over time in higher-PO4 treatments (50 micromolar), including with phosphate-doped basalts, than in treatments with low phosphate concentrations (0.5 micromolar) often found in crustal fluids. These observations suggest phosphate as a main driver of biofilm formation in subsurface crust. Overall, these data suggest that the drivers of microbial biofilm formation on crustal substrates are selective to the substrate conditions, which has important implications for estimating the global biomass of life harbored in oceanic crust.

Milankovitch-scale correlations between deeply buried microbial populations and biogenic ooze lithology

Science.gov (United States)

Aiello, I.W.; Bekins, B.A.

2010-01-01

The recent discoveries of large, active populations of microbes in the subseafloor of the world's oceans supports the impact of the deep biosphere biota on global biogeochemical cycles and raises important questions concerning the functioning of these extreme environments for life. These investigations demonstrated that subseafloor microbes are unevenly distributed and that cell abundances and metabolic activities are often independent from sediment depths, with increased prokaryotic activity at geochemical and/or sedimentary interfaces. In this study we demonstrate that microbial populations vary at the scale of individual beds in the biogenic oozes of a drill site in the eastern equatorial Pacific (Ocean Drilling Program Leg 201, Site 1226). We relate bedding-scale changes in biogenic ooze sediment composition to organic carbon (OC) and microbial cell concentrations using high-resolution color reflectance data as proxy for lithology. Our analyses demonstrate that microbial concentrations are an order of magnitude higher in the more organic-rich diatom oozes than in the nannofossil oozes. The variations mimic small-scale variations in diatom abundance and OC, indicating that the modern distribution of microbial biomass is ultimately controlled by Milankovitch-frequency variations in past oceanographic conditions. ?? 2010 Geological Society of America.

Intergranular fluid compositions from the Waste Isolation Pilot Plant (WIPP) southeastern New Mexico

International Nuclear Information System (INIS)

Krumhansl, J.L.; Kimball, K.M.; Stein, C.L.

1991-01-01

The objective of this study was to perform a systematic sampling of the intergranular brines that slowly ''weep'' from four of the main stratigraphic units exposed in the WIPP. This information was added to the data base on brine compositions used in performance assessment and also employed in characterizing Salado Formation hydrology at the repository horizon. Concentrations of Na, K, Mg, Ca, Cl, SO 4 , and Br were all highly variable. It was also established that this variability reflects neither post-excavation evaporation nor imprecision in the analytical techniques. Compositional variability on the length scale of a few tens of centimeters is as large as that found over several hundreds of meters. Stratigraphy did not appear to exert any control over weep brine compositions. Programmatically relevant applications of these results are: (1) a valid performance assessment must consider the possibility of a wide range of brines, rather than carry out evaluations using a single ''best'' average brine, and (2) the Salado appears not to function as a continuous aquifer since brines originating millions of years ago have failed to homogenize though separated by only short distances. 10 refs., 19 figs., 11 tabs

Room Q data report: Test borehole data from April 1989 through November 1991

International Nuclear Information System (INIS)

Jensen, A.L.; Howard, C.L.; Jones, R.L.; Peterson, T.P.

1993-03-01

Pore-pressure and fluid-flow tests were performed in 15 boreholes drilled into the bedded evaporites of the Salado Formation from within the Waste Isolation Pilot Plant (WIPP). The tests measured fluid flow and pore pressure within the Salado. The boreholes were drilled into the previously undisturbed host rock around a proposed cylindrical test room, Room Q, located on the west side of the facility about 655 m below ground surface. The boreholes were about 23 m deep and ranged over 27.5 m of stratigraphy. They were completed and instrumented before excavation of Room Q. Tests were conducted in isolated zones at the end of each borehole. Three groups of 5 isolated zones extend above, below, and to the north of Room Q at increasing distances from the room axis. Measurements recorded before, during, and after the mining of the circular test room provided data about borehole closure, pressure, temperature, and brine seepage into the isolated zones. The effects of the circular excavation were recorded. This data report presents the data collected from the borehole test zones between April 25, 1989 and November 25, 1991. The report also describes test development, test equipment, and borehole drilling operations

Basic data report for drillhole ERDA 9 (Waste Isolation Pilot Plant WIPP)

International Nuclear Information System (INIS)

1983-01-01

ERDA 9 was drilled in eastern Eddy County, New Mexico, to investigate and test salt beds for the disposal of nuclear wastes. The hole was placed near the SE corner of section 20, T22S,R31E. It was drilled between April 28 and June 4, 1976, to a depth of 2889 ft (measured from a kelly bushing altitude of 3,420.4 ft MSL). The borehole encountered, from top to bottom, Holocene deposits (including artificial fill) of 22 ft, the Pleistocene Mescalero Caliche (5 ft) and Gatuna Formation (27 ft), 9 ft of the Triassic Santa Rosa Sandstone, and 487 ft of the Dewey Lake Red Beds, 290 ft of the Rustler Formation, 1976 ft of the Salado Formation and 53 ft of the Castile Formation, all of Permian age. Cuttings were collected at 5-ft intervals for the land surface to a depth of 1090 ft, and consecutive cores were taken to a depth of 2876.6 ft. A suite of wireline geophysical logs was run the full length of the borehole to measure distribution of radioactive elements and hydrogen, and variations in rock density and elastic velocity. On the basis of the borehole findings and related hydrological and geophysical programs, the site was judged suitable to pursue the extensive geological characterization program which followed. The core from ERDA 9 provided a suite of samples extensively tested for rock mechanics, physical properties, and mineralogy. Drill-stem tests in ERDA 9 indicated no significant fluids or permeability in the Salado beds of interest. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Water retention and availability in soils of the State of Santa Catarina-Brazil: effect of textural classes, soil classes and lithology

Directory of Open Access Journals (Sweden)

André da Costa

2013-12-01

Full Text Available The retention and availability of water in the soil vary according to the soil characteristics and determine plant growth. Thus, the aim of this study was to evaluate water retention and availability in the soils of the State of Santa Catarina, Brazil, according to the textural class, soil class and lithology. The surface and subsurface horizons of 44 profiles were sampled in different regions of the State and different cover crops to determine field capacity, permanent wilting point, available water content, particle size, and organic matter content. Water retention and availability between the horizons were compared in a mixed model, considering the textural classes, the soil classes and lithology as fixed factors and profiles as random factors. It may be concluded that water retention is greater in silty or clayey soils and that the organic matter content is higher, especially in Humic Cambisols, Nitisols and Ferralsol developed from igneous or sedimentary rocks. Water availability is greater in loam-textured soils, with high organic matter content, especially in soils of humic character. It is lower in the sandy texture class, especially in Arenosols formed from recent alluvial deposits or in gravelly soils derived from granite. The greater water availability in the surface horizons, with more organic matter than in the subsurface layers, illustrates the importance of organic matter for water retention and availability.

Lithological architecture and petrography of the Mako Birimian greenstone belt, Kédougou-Kéniéba Inlier, eastern Senegal

Science.gov (United States)

Dabo, Moussa; Aïfa, Tahar; Gning, Ibrahima; Faye, Malick; Ba, Mamadou Fallou; Ngom, Papa Malick

2017-07-01

The new lithological and petrographic data obtained in the Mako sector are analyzed in the light of the geochemical data available in the literature. It consists of ultramaic, mafic rocks of tholeiitic affinities associated with intermediate and felsic rocks of calc-alkaline affinities and with intercalations of sedimentary rocks. The whole unit is intruded by Eburnean granitoids and affected by a greenschist to amphibolite facies metamorphism related to a high grade hydrothermalism. It consists of: (i) ultramafic rocks composed of a fractional crystallization succession of lherzolites, wehrlites and pyroxenites with mafic rock inclusions; (ii) layered, isotropic and pegmatitic metagabbros which gradually pass to metabasalts occur at the top; (iii) massive and in pillow metabasalts with locally tapered vesicles, completely or partially filled with quartzo-feldspathic minerals; (iv) quarzites locally overlying the mafic rocks and thus forming the top of the lower unit. This ultramafic-mafic lower unit presents a tholeiitic affinity near to the OIB or N-MORB. It represents the Mako Ophiolitic Complex (MOC), a lithospheric fragment of Birimian lithospheric crust. The upper unit is a mixed volcanic complex arranged in the tectonic corridors. From bottom to top it comprises the following: (i) andesitic, and (ii) rhyodacitic and rhyolitic lava flows and tuffs, respectively. They present a calc-alkaline affinity of the active margins. Three generations of Eburnean granitoids are recognized: (i) early (2215-2160 Ma); (ii) syn-tectonics (2150-2100 Ma) and post-tectonics (2090-2040 Ma). The lithological succession, geochemical and metamorphic characteristics of these units point to an ophiolitic supra-subduction zone.

Discrimination of Sedimentary Lithologies Through Unmixing of EO-1 Hyperion Data: Melville Island, Canadian High Arctic

Science.gov (United States)

Leverington, D. W.

2008-12-01

The use of remote-sensing techniques in the discrimination of rock and soil classes in northern regions can help support a diverse range of activities including environmental characterization, mineral exploration, and the study of Quaternary paleoenvironments. Images of low spectral resolution can commonly be used in the mapping of lithological classes possessing distinct spectral characteristics, but hyperspectral databases offer greater potential for discrimination of materials distinguished by more subtle reflectance properties. Orbiting sensors offer an especially flexible and cost-effective means for acquisition of data to workers unable to conduct airborne surveys. In an effort to better constrain the utility of hyperspectral datasets in northern research, this study undertook to investigate the effectiveness of EO-1 Hyperion data in the discrimination and mapping of surface classes at a study area on Melville Island, Nunavut. Bedrock units in the immediate study area consist of late-Paleozoic clastic and carbonate sequences of the Sverdrup Basin. Weathered and frost-shattered felsenmeer, predominantly taking the form of boulder- to pebble-sized clasts that have accumulated in place and that mantle parent bedrock units, is the most common surface material in the study area. Hyperion data were converted from at-sensor radiance to reflectance, and were then linearly unmixed on the basis of end-member spectra measured from field samples. Hyperion unmixing results effectively portray the general fractional cover of six end members, although the fraction images of several materials contain background values that in some areas overestimate surface exposure. The best separated end members include the snow, green vegetation, and red-weathering sandstone classes, whereas the classes most negatively affected by elevated fraction values include the mudstone, limestone, and 'other' sandstone classes. Local overestimates of fractional cover are likely related to the

Petrological-geochemical characteristics of coarse-grained clastic sedimentary rocks of Quantou Formation, Cretaceous in Songliao basin and their geological significance

International Nuclear Information System (INIS)

Wang Gan; Zhang Bangtong

2005-01-01

Clastic sedimentary rocks of Quantou Formation, Cretaceous in Qing-an area, Songliao basin are mainly composed of sandstone, mudstone and siltstone. The petrological-chemical analysis of clastic sedimentary rocks from Quantou Formation, Cretaceous indicates that their lithology mainly consists of arkose, shale and minor rock debris sandstone and greywacke by chemical classification of bulk elements. REE distribution pattern displays the apparent enrichment of LREE and negative anomaly of Eu and is similar to that of NASC and PAAS. The ratio of trace-element in sedimentary rocks to that of upper crust shows gentle character. All the above features indicate that these sedimentary rocks were slowly deposited under weakly active tectonic setting. They are sediments typical for passive continental margin and active continental margin. It is suggested that material source of clastic sediments of Quantou Formation, Cretaceous in Qing-an area, Songliao basin was originated from Hercynian granite of Zhangguangchai Mountain, and the granite was originated from upper crust. (authors)

Diagenetic Microcrystalline Opal Varieties from the Monterey Formation, CA: HRTEM Study of Structures and Phase Transformation Mechanisms

Science.gov (United States)

Cady, Sherry L.; Wenk, H.-R.; DeVincenzi, Don (Technical Monitor)

1994-01-01

Microcrystalline opal varieties form as intermediary precipitates during the diagenetic transformation of biogenically precipitated non-crystalline opal (opal-A) to microquartz. With regard to the Monterey Formation of California, X-ray powder diffraction studies have shown that a decrease in the primary d-spacing of opal-CT toward that of cristobalite occurs with increasing diagenesis. The initial timing of opal-CT/quartz formation and the value of the primary opal-CT d-spacing, are influenced by the sediment. lithology. Transmission electron microscopy methods (CTEM/HRTEM) were used to investigate the structure of the diagenetic phases and establish transformation mechanisms between the varieties of microcrystalline opals in charts and porcelanites from the Monterey Formation. HRTEM images revealed that the most common fibrous varieties of microcrystalline opals contain varying amounts of structural disorder. Finite lamellar units of cristobalite-and tridymite-type. layer sequences were found to be randomly stacked in a direction perpendicular to the fiber axis. Disordered and ordered fibers were found to have coprecipitated within the same radial fiber bundles that formed within the matrix of the Most siliceous samples. HRTEM images, which reveal that the fibers within radial and lepispheric fiber bundles branch non-crystallographically, support an earlier proposal that microspheres in chert grow via a spherulitic growth mechanism. A less common variety of opal-CT was found to be characterized by non-parallel (low-angle) stacking sequences that often contain twinned lamellae. Tabular-shaped crystals of orthorhombic tridymite (PO-2) were also identified in the porcelanite samples. A shift in the primary d-spacing of opal-CT has been interpreted as an indication of solid-state ordering g toward a predominantly cristobalite structure, (opal-C). Domains of opal-C were identified as topotactically-oriented overgrowths on discrete Sections of opal-CT fibers and as

Brine Sampling and Evaluation Program: 1988 report

International Nuclear Information System (INIS)

Deal, D.E.; Abitz, R.J.; Case, J.B.; Crawley, M.E.; Deshler, R.M.; Drez, P.E.; Givens, C.A.; King, R.B.; Myers, J.; Pietz, J.M.; Roggenthen, W.M.; Tyburski, J.R.; Belski, D.S.; Niou, S.; Wallace, M.G.

1989-12-01

The data presented in this report are the result of Brine Sampling and Evaluation Program (BSEP) activities at the Waste Isolation Pilot Plant (WIPP) during 1988. These activities, which are a continuation and update of studies that began in 1982 as part of the Site Validation Program, were formalized as the BSEP in 1985 to document and investigate the origins, hydraulic characteristics, extent, and composition of brine occurrences in the Permian Salado Formation, and seepage of that brine into the excavations at the WIPP. Previous BSEP reports (Deal and Case, 1987; Deal and others, 1987) described the results of ongoing activities that monitor brine inflow into boreholes in the facility, moisture content of the Salado Formation, brine geochemistry, and brine weeps and crusts. The information provided in this report updates past work and describes progress made during the calendar year 1988. During 1988, BSEP activities focused on four major areas to describe and quantify brine activity: (1) monitoring of brine inflow parameters, e.g., measuring brines recovered from holes drilled upward from the underground drifts (upholes), downward from the underground drifts (downholes), and near-horizontal holes; (2) characterizing the brine, e.g., the geochemistry of the brine and the presence of bacteria and their possible interactions with experiments and operations; (3) characterizing formation properties associated with the occurrence of brine; e.g., determining the water content of various geologic units, examining these units in boreholes using a video camera system, and measuring their resistivity (conductivity); and (4) modeling to examine the interaction of salt deformation near the workings and brine seepage through the deforming salt. 77 refs., 48 figs., 32 tabs

Gnome-Coach, New Mexico Site Fact Sheet

International Nuclear Information System (INIS)

2009-01-01

The Gnome-Coach Site is located in southern Eddy County, New Mexico, 11 miles east of the Pecos River and 25 miles southeast of the city of Carlsbad. The site is approximately 680 acres. The land is currently withdrawn from all forms of disposition under the public land laws, including U.S. mining laws and leasing under mineral leasing laws. On December 10, 1961, a 3-kiloton-yield nuclear device was detonated at a depth of 1,183 feet below ground surface in a thick, bedded salt deposit within the Salado Formation.

Comparison of lithological mapping results from airborne hyperspectral VNIR-SWIR, LWIR and combined data

Science.gov (United States)

Feng, Jilu; Rogge, Derek; Rivard, Benoit

2018-02-01

This study investigates using the Airborne Hyperspectral Imaging Systems (AISA) visible and short-wave infrared (SWIR) and Spatially Enhanced Broadband Array Spectrograph System (SEBASS) longwave infrared (LWIR) (2 and 4 m spatial resolution, respectively) imagery independently and in combination to produce detailed lithologic maps in a subarctic region (Cape Smith Belt, Nunavik, Canada) where regionally metamorphosed lower greenschist mafic, ultramafic and sedimentary rocks are exposed in the presence of lichen coatings. We make use of continuous wavelet analysis (CWA) to improve the radiometric quality of the imagery through the minimization of random noise and the enhancement of spectral features, the minimization of residual errors in the ISAC radiometric correction and target temperature estimation in the case of the LWIR data, the minimization of line to line residual calibration effects that lead to inconsistencies in data mosaics, and the reduction in variability of the spectral continuum introduced by variable illumination and topography. The use of CWA also provides a platform to directly combine the wavelet scale spectral profiles of the SWIR and LWIR after applying a scalar correction factor to the LWIR such that the dynamic range of two data sets have equal weight. This is possible using CWA as the datasets are normalized to a zero mean allowing spectra from different spectral regions to be adjoined. Lithologic maps are generated using an iterative spectral unmixing approach with image spectral endmembers extracted from the SWIR and LWIR imagery based on locations defined from previous work of the study area and field mapping information. Unmixing results of the independent SWIR and LWIR data, and the combined data show clear benefits to using the CWA combined imagery. The analysis showed SWIR and LWIR imagery highlight similar regions and spatial distributions for the three ultramafic units (dunite, peridotite, pyroxenite). However, significant

Lithological Influences on Occurrence of High-Fluoride Waters in The Central Kenya Rift

Science.gov (United States)

Olaka, L. A.; Musolff, A.; Mulch, A.; Olago, D.; Odada, E. O.

2013-12-01

Within the East African rift, groundwater recharge results from the complex interplay of geology, land cover, geomorphology, climate and on going volcano-tectonic processes across a broad range of spatial and temporal scales. The interrelationships between these factors create complex patterns of water availability, reliability and quality. The hydrochemical evolution of the waters is further complex due to the different climatic regimes and geothermal processes going on in this area. High fluoridic waters within the rift have been reported by few studies, while dental fluorosis is high among the inhabitants of the rift. The natural sources of fluoride in waters can be from weathering of fluorine bearing minerals in rocks, volcanic or fumarolic activities. Fluoride concentration in water depends on a number of factors including pH, temperature, time of water-rock formation contact and geochemical processes. Knowledge of the sources and dispersion of fluoride in both surface and groundwaters within the central Kenya rift and seasonal variations between wet and dry seasons is still poor. The Central Kenya rift is marked by active tectonics, volcanic activity and fumarolic activity, the rocks are majorly volcanics: rhyolites, tuffs, basalts, phonolites, ashes and agglomerates some are highly fractured. Major NW-SE faults bound the rift escarpment while the rift floor is marked by N-S striking faults We combine petrographic, hydrochemistry and structural information to determine the sources and enrichment pathways of high fluoridic waters within the Naivasha catchment. A total of 120 water samples for both the dry season (January-February2012) and after wet season (June-July 2013) from springs, rivers, lakes, hand dug wells, fumaroles and boreholes within the Naivasha catchment are collected and analysed for fluoride, physicochemical parameters and stable isotopes (δ2 H, δ18 O) in order to determine the origin and evolution of the waters. Additionally, 30 soil and

Basic data report for drillhole WIPP 32 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1980-11-01

WIPP 32 is an exploratory borehole drilled to examine the subsurface at a small topographic high in Nash Draw. The borehole is located in east-central Eddy County, New Mexico, in NE 1/4 SE 1/4 Sec. 33, T.22S., R.29E. and was drilled in August, 1979. The hole was drilled to a depth of 390 feet, and encountered, from top to bottom, the Rustler Formation (166') and the upper Salado Formation (224'). Core was taken from 4 to 353 feet. Geophysical logs were run the full length of the hole to measure formation properties. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes. The WIPP will also provide facilities to research interactions between high-level waste and salt

The effect of lithology on valley width, terrace distribution, and coarse sediment provenance in a tectonically stable catchment with flat-lying stratigraphy

Science.gov (United States)

Amanda Keen-Zebert,; Hudson, Mark R.; Stephanie L. Shepherd,; Evan A. Thaler,

2017-01-01

How rock resistance or erodibility affects fluvial landforms and processes is an outstanding question in geomorphology that has recently garnered attention owing to the recognition that the erosion rates of bedrock channels largely set the pace of landscape evolution. In this work, we evaluate valley width, terrace distribution, and sediment provenance in terms of reach scale variation in lithology in the study reach and discuss the implications for landscape evolution in a catchment with relatively flat2

Lithologic combinations in Romanesque churches of Álava, northern Spain

Directory of Open Access Journals (Sweden)

Martínez-Torres, L. M.

2014-03-01

Full Text Available Certain windows and doorways on twenty five Romanesque churches of Álava (XII–XIII centuries were built using six types of rock in nine different combinations. These compositions were intended to highlight the contrast in colour between different rocks, from which it can be deduced that the openings were not hewn to be painted. After almost seven centuries during which the use of stone was anecdotal, Romanesque artists burst in with colourful blends, demonstrating a broad knowledge of the characteristics of each rock and its availability. The uniqueness of these openings is represented on lithologic maps which, in addition to facilitating its analysis and dissemination, serve as a reference in its restoration.Algunas ventanas y portadas de veinticinco iglesias románicas de Álava (siglos XII-XIII fueron construidas con hasta seis tipos de rocas en nueve combinaciones diferentes. Estas composiciones pretendían resaltar el contraste cromático entre rocas distintas, de lo que se deduce que los vanos no fueron tallados para ser policromados. Después de casi siete siglos en los que el uso de la piedra fuera anecdótico, los artistas románicos irrumpen con mezclas coloristas, mostrando un amplio conocimiento de las características de cada roca y su disponibilidad. La singularidad de estos vanos está representada en mapas litológicos que, además de facilitar su análisis y divulgación, servirán de referencia en su restauración

Soil chemistry in lithologically diverse datasets: the quartz dilution effect

Science.gov (United States)

Bern, Carleton R.

2009-01-01

National- and continental-scale soil geochemical datasets are likely to move our understanding of broad soil geochemistry patterns forward significantly. Patterns of chemistry and mineralogy delineated from these datasets are strongly influenced by the composition of the soil parent material, which itself is largely a function of lithology and particle size sorting. Such controls present a challenge by obscuring subtler patterns arising from subsequent pedogenic processes. Here the effect of quartz concentration is examined in moist-climate soils from a pilot dataset of the North American Soil Geochemical Landscapes Project. Due to variable and high quartz contents (6.2–81.7 wt.%), and its residual and inert nature in soil, quartz is demonstrated to influence broad patterns in soil chemistry. A dilution effect is observed whereby concentrations of various elements are significantly and strongly negatively correlated with quartz. Quartz content drives artificial positive correlations between concentrations of some elements and obscures negative correlations between others. Unadjusted soil data show the highly mobile base cations Ca, Mg, and Na to be often strongly positively correlated with intermediately mobile Al or Fe, and generally uncorrelated with the relatively immobile high-field-strength elements (HFS) Ti and Nb. Both patterns are contrary to broad expectations for soils being weathered and leached. After transforming bulk soil chemistry to a quartz-free basis, the base cations are generally uncorrelated with Al and Fe, and negative correlations generally emerge with the HFS elements. Quartz-free element data may be a useful tool for elucidating patterns of weathering or parent-material chemistry in large soil datasets.

Lithological and Hydrothermal Alteration Mapping of Epithermal, Porphyry and Tourmaline Breccia Districts in the Argentine Andes Using ASTER Imagery

Directory of Open Access Journals (Sweden)

Francisco J. Testa

2018-01-01

Full Text Available The area of interest is located on the eastern flank of the Andean Cordillera, San Juan province, Argentina. The 3600 km2 area is characterized by Siluro-Devonian to Neogene sedimentary and igneous rocks and unconsolidated Quaternary sediments. Epithermal, porphyry-related, and magmatic-hydrothermal breccia-hosted ore deposits, common in this part of the Frontal Cordillera, are associated with various types of hydrothermal alteration assemblages. Kaolinite – alunite-rich argillic, quartz – illite-rich phyllic, epidote – chlorite – calcite-rich propylitic and silicic are the most common hydrothermal alteration assemblages in the study area. VNIR, SWIR and TIR ASTER data were used to characterize geological features on a portion of the Frontal Cordillera. Red-green-blue band combinations, band ratios, logical operations, mineral indices and principal component analysis were applied to successfully identify rock types and hydrothermal alteration zones in the study area. These techniques were used to enhance geological features to contrast different lithologies and zones with high concentrations of argillic, phyllic, propylitic alteration mineral assemblages and silicic altered rocks. Alteration minerals detected with portable short-wave infrared spectrometry in hand specimens confirmed the capability of ASTER to identify hydrothermal alteration assemblages. The results from field control areas confirmed the presence of those minerals in the areas classified by ASTER processing techniques and allowed mapping the same mineralogy where pixels had similar information. The current study proved ASTER processing techniques to be valuable mapping tools for geological reconnaissance of a large area of the Argentinean Frontal Cordillera, providing preliminary lithologic and hydrothermal alteration maps that are accurate as well as cost and time effective.

Laboratory column experiments for radionuclide adsorption studies of the Culebra dolomite member of the Rustler Formation

International Nuclear Information System (INIS)

Lucero, D.A.; Heath, C.E.; Brown, G.O.

1998-04-01

Radionuclide transport experiments were carried out using intact cores obtained from the Culebra member of the Rustler Formation inside the Waste Isolation Pilot Plant, Air Intake Shaft. Twenty-seven separate tests are reported here and include experiments with 3 H, 22 Na, 241 Am, 239 Np, 228 Th, 232 U and 241 Pu, and two brine types, AIS and ERDA 6. The 3 H was bound as water and provides a measure of advection, dispersion, and water self-diffusion. The other tracers were injected as dissolved ions at concentrations below solubility limits, except for americium. The objective of the intact rock column flow experiments is to demonstrate and quantify transport retardation coefficients, (R) for the actinides Pu, Am, U, Th and Np, in intact core samples of the Culebra Dolomite. The measured R values are used to estimate partition coefficients, (kd) for the solute species. Those kd values may be compared to values obtained from empirical and mechanistic adsorption batch experiments, to provide predictions of actinide retardation in the Culebra. Three parameters that may influence actinide R values were varied in the experiments; core, brine and flow rate. Testing five separate core samples from four different core borings provided an indication of sample variability. While most testing was performed with Culebra brine, limited tests were carried out with a Salado brine to evaluate the effect of intrusion of those lower waters. Varying flow rate provided an indication of rate dependent solute interactions such as sorption kinetics

Sedimentary features of the Blackhawk formation (Cretaceous) at Sunnyside, Carbon County, Utah

Science.gov (United States)

Maberry, John O.

1968-01-01

The Blackhawk Formation at Sunnyside, Utah, was deposited along the western margin of the Western Interior Cretaceous sea during southeastward withdrawal of the sea. Sand was the dominant type of land-derived sediment deposited in the Sunnyside district during the regressive phases. Sand bodies prograded seaward in response to changing sediment supply from a source west of Sunnyside. Where conditions were favorable for the accumulation of vegetable material, peat deposits formed and were later changed to bituminous Coal by diagenesis. Studies of the coal bed show that the coals were formed from accumulation of small, low-growing plants and plant debris that was transported into the area of accumulation. Remains of large plants in the coals are rare. Trace fossils, which are tracks, trails and burrows formed by organisms and preserved in the rock, are extremely abundant in the Blackhawk rocks. These biogenic sedimentary structures are common in Cretaceous deposits throughout the western United States. Trace fossil distribution in the rocks is controlled by the depositional environment preferred by their creators. A study of the trace fossils of a. locality allows a more precise determination of the conditions during deposition of the sediments. Water depth, bottom conditions, salinity, current velocity and amount of suspended nutrients in the water are some of the environmental factors that may be reconstructed by studying trace fossils. The Blackhawk Formation at Sunnyside comprises the members, the Kenilworth Member and the Sunnyside Member. Field studies show that the formation may be further subdivided in the Sunnyside district., according to the precepts of units of mappable thickness and similar lithologic characteristics. The Blackhawk pinches out eastward and north. ward into the Mancos Shale, and names for submembers become meaningless. Names are of value in the region of interest, however, because of the prominence of the named units. Coal mining is the

Effluent migration from septic tank systems in two different lithologies, Broward County, Florida

Science.gov (United States)

Waller, B.G.; Howie, Barbara; Causaras, C.R.

1987-01-01

Two septic tank test sites, one in sand and one in limestone, in Broward County, Florida, were analyzed for effluent migration. Groundwater from shallow wells, both in background areas and hydraulically down-gradient of the septic tank system, was sampled during a 16-month period from April 1983 through August 1984. Water quality indicators were used to determine the effluent affected zone near the septic tank systems. Specific conductance levels and concentrations of chloride, sulfate, ammonium, and nitrate indicated effluent movement primarily in a vertical direction with abrupt dilution as it moved down-gradient. Effluent was detected in the sand to a depth more than 20 ft below the septic tank outlet, but was diluted to near background conditions 50 ft down-gradient from the tank. Effluent in the limestone was detected in all three observation wells to depths exceeding 25 ft below the septic tank outlet and was diluted, but still detectable, 40 ft down-gradient. The primary controls on effluent movement from septic tank systems in Broward County are the lithology and layering of the geologic materials, hydraulic gradients, and the volume and type of use the system receives. (Author 's abstract)

Almahata Sitta MS-MU-011 and MS-MU-012: Formation Conditions of Two Unusual Rocks From the Ureilite Parent Body

Science.gov (United States)

Mikouchi, T.; Takenouchi, A.; Zolensky, M. E.; Hoffmann, V. H.

2018-01-01

Almahata Sitta meteorites are unique polymict breccia, comprising of many different meteorite groups as individual fragments dominated by ureilite lithologies and are considered to be recovered fragments of the asteroid 2008TC3. Recently, two unusual Almahata Sitta samples (MS-MU-011 and MS-MU-012) have been reported that show close petrogenetic relationships to ureilites. MS-MU-011 is a trachyandesite mainly composed of feldspar (plagioclase and anorthoclase) and pyroxene (pigeonite and augite) having ureilitic oxygen isotopic ratios. MS-MU-012 is the first ureilite example (unbrecciated) containing primary plagioclase crystals. The findings of these two rock types are important to better understand formation conditions of ureilites and the evolution of their parent body(s). In this abstract we discuss formation conditions of these ureilite-related rocks using redox state estimate by Fe valence states of plagioclase and olivine cooling rate calculations.

HCMM: Soil moisture in relation to geologic structure and lithology, northern California. [Northern Coast Range, Sacramento Valley, and the Modoc Plateau

Science.gov (United States)

Rich, E. I. (Principal Investigator)

1981-01-01

Heat capacity mapping mission images of about 80,000 sq km in northern California were qualitatively evaluated for usefulness in regional geologic investigations of structure and lithology. The thermal characteristics recorded vary among the several geomorphic provinces and depend chiefly on the topographic expression and vegetation cover. Identification of rock types, or groups of rock types, was most successfully carried out within the semiarid parts of the region; however, extensive features, such as faults, folds and volcanic fields could be delineated. Comparisons of seasonally obtained HCMM images are of limited value except in semiarid regions.

spMC: an R-package for 3D lithological reconstructions based on spatial Markov chains

Science.gov (United States)

Sartore, Luca; Fabbri, Paolo; Gaetan, Carlo

2016-09-01

The paper presents the spatial Markov Chains (spMC) R-package and a case study of subsoil simulation/prediction located in a plain site of Northeastern Italy. spMC is a quite complete collection of advanced methods for data inspection, besides spMC implements Markov Chain models to estimate experimental transition probabilities of categorical lithological data. Furthermore, simulation methods based on most known prediction methods (as indicator Kriging and CoKriging) were implemented in spMC package. Moreover, other more advanced methods are available for simulations, e.g. path methods and Bayesian procedures, that exploit the maximum entropy. Since the spMC package was developed for intensive geostatistical computations, part of the code is implemented for parallel computations via the OpenMP constructs. A final analysis of this computational efficiency compares the simulation/prediction algorithms by using different numbers of CPU cores, and considering the example data set of the case study included in the package.

Dust deposition in southern Nevada and California, 1984-1989: Relations to climate, source area, and source lithology

Science.gov (United States)

Reheis, Marith C.; Kihl, Rolf

1995-05-01

Dust samples collected annually for 5 years from 55 sites in southern Nevada and California provide the first regional source of information on modern rates of dust deposition, grain size, and mineralogical and chemical composition relative to climate and to type and lithology of dust source. The average silt and clay flux (rate of deposition) in southern Nevada and southeastern California ranges from 4.3 to 15.7 g/m2/yr, but in southwestern California the average silt and clay flux is as high as 30 g/m2/yr. The climatic factors that affect dust flux interact with each other and with the factors of source type (playas versus alluvium), source lithology, geographic area, and human disturbance. Average dust flux increases with mean annual temperature but is not correlated to decreases in mean annual precipitation because the regional winds bring dust to relatively wet areas. In contrast, annual dust flux mostly reflects changes in annual precipitation (relative drought) rather than temperature. Although playa and alluvial sources produce about the same amount of dust per unit area, the total volume of dust from the more extensive alluvial sources is much larger. In addition, playa and alluvial sources respond differently to annual changes in precipitation. Most playas produce dust that is richer in soluble salts and carbonate than that from alluvial sources (except carbonate-rich alluvium). Gypsum dust may be produced by the interaction of carbonate dust and anthropogenic or marine sulfates. The dust flux in an arid urbanizing area may be as much as twice that before disturbance but decreases when construction stops. The mineralogic and major-oxide composition of the dust samples indicates that sand and some silt is locally derived and deposited, whereas clay and some silt from different sources can be far-traveled. Dust deposited in the Transverse Ranges of California by the Santa Ana winds appears to be mainly derived from sources to the north and east.

Lithological indicators of loess sedimentation of SW Poland

Directory of Open Access Journals (Sweden)

Krawczyk Marcin

2017-12-01

Full Text Available High-resolution grain-size investigations were carried out in two SW Polish loess sections: Biały Kościół (Niemcza-Strzelin Hills and Zaprężyn (Trzebnica Hills. Each sequence was sampled by using the same methodology and samples were taken at 5 centimeters intervals. The particle size distribution was obtained with a Mastersizer 2000 laser, used for diffraction methods. From the obtained results the basic parameters and grain size indicators were calculated: Mz, Grain Size Index ratio, U-ratio and the percentage content of clay ( 63 μm. Both loess-soil sequences are composed of interfluve and slope loess facies and consist of five litho-pedostratigraphic units developed during the Late Pleistocene and Holocene: two loess units L1LL1, L1LL2 and three polygenetic fossil soils sets S0, S1 and L1SS1. The distance between these two profiles is about 60 km. Zaprężyn, as a section located more to the north, has almost no lower younger loess and higher level of weathering which could be related to proximity of this site to the Ice Sheet margin. The climate here was more extreme and harsh. What is more, the difference in development of soil L1SS1 can be observed: while in Biały Kościół pedogenesis process was slower and less disturbed than in Zaprężyn. The upper part of L1SS1 in Biały Kościół was deformed by gelifluction, frost heave and other periglacial processes. Mz indicator by the grain-size distribution in these sediments reflects subtle variations in the climatic system. Moreover, in Zaprężyn the content of sand fraction is higher than in Biały Kościół what can be the evidence of short episodes of strong winds during cold period of sedimentation. The aim of this paper is to compare two loess profiles by their stratigraphical and lithological similarities which are result of climate conditions and features of surrounding environment.

Depositional system of the Bayangobi formation, lower cretaceous and its control over in-situ leachable sandstone-type uranium deposits in Chagandelesu area, Inner Mongolia

International Nuclear Information System (INIS)

Zhang Wanliang

2002-01-01

Chagandelesu area is situated in the eastern part of Bayangobi basin, Inner Mongolia. In the Early Cretaceous, a detrital rock series (Bayangobi Formation) with a thickness of about 1000 m was formed within a down-faulted basin under the extensional tectonic regime. The Bayangobi Formation is the prospecting target for interlayer oxidation zone sandstone-type uranium deposits, and is divided into three lithologic members: the lower member-- proluvial (alluvial), subaqueous fan or fan-delta facies sediments; the middle member-shallow lacustrine-semi-deep lacustrine-deep lacustrine facies sediments; the upper member-littoral shallow lacustrine or delta facies sediments. The facies order of Bayangobi Formation represents the evolution process of basin water from the shallow (early period) to the deep (middle period) then again to the shallow (late period) level. The Bayangobi Formation composed of a third sequence order reflects respectively a lowstand system tract (LST), a transgressive system tract (TST) and a highstand system tract (HST). The author also makes an analysis on physical properties of psammites of Bayangobi Formation, and proposes that psammites of delta and littoral shallow lacustrine facies are favourable for the formation of interlayer oxidation zone sandstone-type uranium deposits

Combined tide and storm influence on facies sedimentation of miocene Miri Formation, Sarawak

International Nuclear Information System (INIS)

Yuniarta Ulfa; Nasiman Sapari; Zuhar Zahir Tuan Harith

2011-01-01

This study was conducted on the sedimentary rocks belonging to the Miri Formation (Middle - Late Miocene). The primary objective of the present study is to provide additional interpretation on the stratigraphy of the Miri Formation in the Miri Field based on the new information gathered from new outcrops in the area. Five outcrops were examined in detail on sedimentology and stratigraphy. Based on lithology, sedimentary structures, bedding geometry and traces fossil, the sediments of the Miri Formation were grouped into fourteen lithofacies. Influence of tide and storm during the depositional processes of the formation were indicated by the group of two main facies associations which are: (i) tide-dominated estuary; and (ii) wave-and-storm dominated facies associations. The tide-dominated estuary system of the Miri Formation are includes variety of sub environments: estuary mouth or tidal channel and sand bars (characterized by trough cross-stratified sandstone with mud drapes facies), estuary channel or upper flow regime of sand flat (characterized by parallel stratified sandstone with mud-laminas facies), mixed-tidal flat (characterized by wavy and flaser bedded sandstone facies), and mud-tidal flat (characterized by rhythmic stratified sandstone-mudstone and lenticular bedding facies). The wave-and-storm dominated varied from lower to middle shore face (characterized by hummocky cross-stratified sandstone and rhythmic parallel stratified sandstone and laminated siltstone facies), upper shore face (characterized by swaley cross-stratified sandstone), lower shore face inter bedded to bioturbated sandstone and siltstone facies), and offshore transitional (characterized by bioturbated sandstone and mudstone inter bedding with parallel to hummocky cross-stratified sandstone facies). (author)

The groundwater regime of the Harwell region

International Nuclear Information System (INIS)

Alexander, J.

1983-12-01

A regional hydrogeological assessment has been undertaken in the Harwell area utilizing currently available geological information and water level data. Since the dissolution and transport of any disposed waste would be controlled by the rate and direction of groundwater movement through a potential repository, a detailed knowledge of regional and local hydrogeology is essential. This study is based on the tenet that very slow groundwater movement, through a sequence of clay lithologies, is measurable at widely separated points within intervening high permeability systems. The analysis of available data from high permeability units within a regional groundwater flow-system provides a general flow model which takes into account inter-lithology water movement in general and vertical water movement across low permeability formations in particular. Groundwater contour maps have been constructed for the Chalk, Upper Greensand, Corallian and Great Oolite lithologies. These show that in the Cretaceous and Jurassic formations of the Harwell area, groundwater movement is predominantly in the horizontal direction with a smaller proportion of vertical flow taking place between adjacent formations. The potential for vertical movement, both upwards and downwards through intervening low permeability clay lithologies is evident. The results are discussed. (author)

Applying of the Artificial Neural Networks (ANN) to Identify and Characterize Sweet Spots in Shale Gas Formations

Science.gov (United States)

Puskarczyk, Edyta

2018-03-01

The main goal of the study was to enhance and improve information about the Ordovician and Silurian gas-saturated shale formations. Author focused on: firstly, identification of the shale gas formations, especially the sweet spots horizons, secondly, classification and thirdly, the accurate characterization of divisional intervals. Data set comprised of standard well logs from the selected well. Shale formations are represented mainly by claystones, siltstones, and mudstones. The formations are also partially rich in organic matter. During the calculations, information about lithology of stratigraphy weren't taken into account. In the analysis, selforganizing neural network - Kohonen Algorithm (ANN) was used for sweet spots identification. Different networks and different software were tested and the best network was used for application and interpretation. As a results of Kohonen networks, groups corresponding to the gas-bearing intervals were found. The analysis showed diversification between gas-bearing formations and surrounding beds. It is also shown that internal diversification in sweet spots is present. Kohonen algorithm was also used for geological interpretation of well log data and electrofacies prediction. Reliable characteristic into groups shows that Ja Mb and Sa Fm which are usually treated as potential sweet spots only partially have good reservoir conditions. It is concluded that ANN appears to be useful and quick tool for preliminary classification of members and sweet spots identification.

Evaporite dissolution relevant to the WIPP site, northern Delaware Basin, southeastern New Mexico

International Nuclear Information System (INIS)

Lambert, S.J.

1982-01-01

Evaluation of the threat of natural dissolution of host evaporites to the integrity of the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico has taken into consideration (1) the volume of missing rock salt, (2) the occurrence (or not) of characteristic dissolution brines, (3) geomorphic features, some of which are unrelated to dissolution, and (4) the time intervals over which dissolution may have been active. Even under the assumption that all missing halite was originally present and has been removed by dissolution, there is no evidence of active preferential removal of the lower Salado Formation halite by any geologically reasonable process. The geologic record contains evidence of dissolution in the Triassic and Jurassic; to constrain all removal of basinal halite to the late Cenozoic yields an unrealistically high rate of removal. Application to the lower Salado of a stratabound mechanism known to be active in Nash Draw, a near-surface feature within the Basin, allows a minimum survival time of 2,500,000 years to be predicted for the subsurface facility for storage of radioactive waste at WIPP. This calculation is based on an analysis of all known dissolution features in the Delaware Basin, and takes into account the wetter (pluvial) climate during the past 600,000 years. 2 figures, 1 table

WIPP Hydrology Program Waste Isolation Pilot Plant southeastern New Mexico. Hydrologic data report No. 2

International Nuclear Information System (INIS)

1985-12-01

This report contains basic hydrologic data for aquifer tests and water-level measurements conducted at the Waste Isolation Pilot Plant (WIPP) site over the period 1983 through November 1985. Part A summarizes data collected during a series of pumping and slug tests conducted during 1983 and 1984 in wells at the H-2 and H-9 hydropads, and in well H-12. Water-level data collected in 1983 and 1984 at the H-2 hydropads and Appendixes tabulate water-level, drawdown, millivolt, and pressure data collected with automated Data Acquisition Systems (DAS's) during the aquifer tests for both the test wells and the observation wells, and water-level data collected with electric water-level sounders. Part B is a detailed presentation of pumping tests conducted at the H-11 hydropad in May and June, 1985. Part B discusses the automated DAS, water-level measurement devices, the discharge measurement system, well and equipment configurations, and provides plots of pressure or water-level response in both the pumping and observation wells. Pressure data collected with the DAS, depth to water collected with the water-level sounders in observation wells, and measured pumping rate data are tabulated. Part C presents January through November, 1985 water-level data collected from wells in the observation-well network at and near the WIPP site. The types of devices utilized are discussed and the water-level plots obtained from the water-level data for the Magenta, the Culebra, the Rustler-Salado contact zone, the Bell Canyon Formation, and the Salado/Castile Formations are presented. Water levels are tabulated

Fluid injection for salt water disposal and enhanced oil recovery as a potential problem for the WIPP: Proceedings of a June 1995 workshop and analysis

International Nuclear Information System (INIS)

Silva, M.K.

1996-08-01

The Waste Isolation Pilot Plant (WIPP) is a facility of the U.S. Department of Energy (DOE), designed and constructed for the permanent disposal of transuranic (TRU) defense waste. The repository is sited in the New Mexico portion of the Delaware Basin, at a depth of 655 meters, in the salt beds of the Salado Formation. The WIPP is surrounded by reserves and production of potash, crude oil and natural gas. In selecting a repository site, concerns about extensive oil field development eliminated the Mescalero Plains site in Chaves County and concerns about future waterflooding in nearby oil fields helped eliminate the Alternate II site in Lea County. Ultimately, the Los Medanos site in Eddy County was selected, relying in part on the conclusion that there were no oil reserves at the site. For oil field operations, the problem of water migrating from the injection zone, through other formations such as the Salado, and onto adjacent property has long been recognized. In 1980, the DOE intended to prohibit secondary recovery by waterflooding in one mile buffer surrounding the WIPP Site. However, the DOE relinquished the right to restrict waterflooding based on a natural resources report which maintained that there was a minimal amount of crude oil likely to exist at the WIPP site, hence waterflooding adjacent to the WIPP would be unlikely. This document presents the workshop presentations and analyses for the fluid injection for salt water disposal and enhanced oil recovery utilizing fluid injection and their potential effects on the WIPP facility

Brine Sampling and Evaluation Program, 1991 report

Energy Technology Data Exchange (ETDEWEB)

Deal, D.E.; Abitz, R.J.; Myers, J.; Martin, M.L.; Milligan, D.J.; Sobocinski, R.W.; Lipponer, P.P.J. [International Technology Corp., Albuquerque, NM (United States); Belski, D.S. [Westinghouse Electric Corp., Carlsbad, NM (United States). Waste Isolation Div.

1993-09-01

The data presented in this report are the result of Brine Sampling and Evaluation Program (BSEP) activities at the Waste Isolation Pilot Plan (WIPP) during 1991. These BSEP activities document and investigate the origins, hydraulic characteristics, extent, and composition of brine occurrences in the Permian Salado Formation and seepage of that brine into the excavations at the WIPP. When excavations began at the WIPP in 1982, small brine seepages (weeps) were observed on the walls. Brine studies began as part of the Site Validation Program and were formalized as a program in its own right in 1985. During nine years of observations (1982--1991), evidence has mounted that the amount of brine seeping into the WIPP excavations is limited, local, and only a small fraction of that required to produce hydrogen gas by corroding the metal in the waste drums and waste inventory. The data through 1990 is discussed in detail and summarized by Deal and others (1991). The data presented in this report describes progress made during the calendar year 1991 and focuses on four major areas: (1) quantification of the amount of brine seeping across vertical surfaces in the WIPP excavations (brine ``weeps); (2) monitoring of brine inflow, e.g., measuring brines recovered from holes drilled downward from the underground drifts (downholes), upward from the underground drifts (upholes), and from subhorizontal holes; (3) further characterization of brine geochemistry; and (4) preliminary quantification of the amount of brine that might be released by squeezing the underconsolidated clays present in the Salado Formation.

Basic Data Report for Drillhole SNL-1 (C-2953)

International Nuclear Information System (INIS)

Powers, Dennis W.

2005-01-01

SNL-1 (permitted by the New Mexico State Engineer as C-2953) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation near the margin of dissolution of halite in the upper Permian Salado Formation in the northeast arm of Nash Draw. SNL-1 is located in the northwest quarter of section 16, T21S, R31E, in eastern Eddy County, New Mexico, and it is adjacent to the tailings pile of Mississippi Potash Incorporated (now Intrepid) East mine to test for the presence of shallow zones that might include brine infiltrated from the tailings pile. SNL-1 was drilled to a total depth of 644 ft below ground level (bgl). Below surface wash, SNL-1 encountered, in order, the Mescalero caliche, Dewey Lake, and Rustler Formations.

Basic Data Report for Drillhole SNL-1 (C-2953)

Energy Technology Data Exchange (ETDEWEB)

Dennis W. Powers; Washington Regulatory and Environmental Services

2005-01-19

SNL-1 (permitted by the New Mexico State Engineer as C-2953) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation near the margin of dissolution of halite in the upper Permian Salado Formation in the northeast arm of Nash Draw. SNL-1 is located in the northwest quarter of section 16, T21S, R31E, in eastern Eddy County, New Mexico, and it is adjacent to the tailings pile of Mississippi Potash Incorporated (now Intrepid) East mine to test for the presence of shallow zones that might include brine infiltrated from the tailings pile. SNL-1 was drilled to a total depth of 644 ft below ground level (bgl). Below surface wash, SNL-1 encountered, in order, the Mescalero caliche, Dewey Lake, and Rustler Formations.

Groundwater monitoring at the waste isolation pilot plant

International Nuclear Information System (INIS)

Kehrman, R.; Broberg, K.; Tatro, G.; Richardson, R.; Dasczcyszak, W.

1990-01-01

This paper discusses the Groundwater Monitoring Program (GMP) being conducted at the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. The Regulatory and Environmental Programs (REP) section of the Environment, Safety and Health department (ES ampersand H) is responsible for conducting environmental monitoring at the WIPP. Groundwater monitoring is one of the ongoing environmental activities currently taking place. The REP section includes water-quality sampling and water-level monitoring. The WIPP Project is a research and development facility designed to demonstrate the safe disposal of defense-generated TRU and mixed waste in a geologic repository. The Salado Formation of Permian age serves as the repository medium. The Salado Formation consists of bedded salt and associated evaporites. The formation is 602 meters thick at the site area; the top surface is located at a subsurface depth of 262 meters (10). The repository lies at a subsurface depth of 655 meters. Water-quality sampling for physical, chemical, and radiological parameters has been an ongoing activity at the WIPP site for the past six years, and will continue through the life of the project. Data collected from this program to date, has been used by Sandia National Laboratories for site characterization and performance assessment work. The data has also been used to establish a baseline of preoperational radiological and nonradiological groundwater quality. Once the facility begins receiving waste, this baseline will be used to determine if the WIPP facility influences or alters groundwater quality over time. The water quality of a well is determined while the well is continuously pumped. Serial samples of the pumped water are collected and tested for pH, Eh, temperature, specific gravity, specific conductivity, alkalinity, chlorides, divalent cations, ferrous iron, and total iron. 13 refs., 4 figs., 1 tab

Calcareous nannofossils and sedimentary facies in the Upper Cretaceous Bozeş Formation (Southern Apuseni Mountains, Romania

Directory of Open Access Journals (Sweden)

Ramona Balc

2012-02-01

Full Text Available The lithology, sedimentology and biostratigraphy of the Bozes Formation, which crop out in the SE Metaliferi Mountains (Apuseni Mts. have been investigated in order to establish the age of the deposits and the depositional environment. The sedimentary structures and facies are interpreted as indicating a deep-water depositional environment, representing part of a submarine fan lobe. Three facies assemblages have been identified and described. Calcareous nannofossils were used to determine the age of the investigated deposits. The presence of Lucianorhabdus cayeuxii and Calculites obscurus indicates the CC17 biozone, while UC13 Zone is pointed out by the continuous occurrence of Arkhangelskiella cymbiformis and the absence of Broinsonia parca parca. Thus, the age of the studied deposits is Late Santonian -?Early Campanian.

Geological and petrophysical characterization of the Ferron Sandstone for 3-D simulation of a fluvial-deltaic reservoir. Deliverable 2.5.4, Ferron Sandstone lithologic strip logs, Emergy & Sevier Counties, Utah: Volume I

Energy Technology Data Exchange (ETDEWEB)

Allison, M.L.

1995-12-08

Strip logs for 491 wells were produced from a digital subsurface database of lithologic descriptions of the Ferron Sandstone Member of the Mancos Shale. This subsurface database covers wells from the parts of Emery and Sevier Counties in central Utah that occur between Ferron Creek on the north and Last Chance Creek on the south. The lithologic descriptions were imported into a logging software application designed for the display of stratigraphic data. Strip logs were produced at a scale of one inch equals 20 feet. The strip logs were created as part of a study by the Utah Geological Survey to develop a comprehensive, interdisciplinary, and qualitative characterization of a fluvial-deltaic reservoir using the Ferron Sandstone as a surface analogue. The study was funded by the U.S. Department of Energy (DOE) under the Geoscience/Engineering Reservoir Characterization Program.

Consistent lithological units and its influence on geomechanical stratification in shale reservoir: case study from Baltic Basin, Poland.

Science.gov (United States)

Pachytel, Radomir; Jarosiński, Marek; Bobek, Kinga

2017-04-01

Geomechanical investigations in shale reservoir are crucial to understand rock behavior during hydraulic fracturing treatment and to solve borehole wall stability problem. Anisotropy should be considered as key mechanical parameter while trying to characterize shale properties in variety of scales. We are developing a concept of step-by-step approach to characterize and upscale the Consistent Lithological Units (CLU) at several scales of analysis. We decided that the most regional scale model, comparable to lithostratigraphic formations, is too general for hydraulic fracture propagation study thus a more detailed description is needed. The CLU's hierarchic model aims in upscale elastic properties with their anisotropy based on available data from vertical borehole. For the purpose of our study we have an access to continuous borehole core profile and full set of geophysical logging from several wells in the Pomeranian part of the Ordovician and Silurian shale complex belongs to the Baltic Basin. We are focused on shale properties that might be crucial for mechanical response to hydraulic fracturing: mineral components, porosity, density, elastic parameters and natural fracture pattern. To prepare the precise CLU model we compare several methods of determination and upscaling every single parameter used for consistent units secretion. Mineralogical data taken from ULTRA log, GEM log, X-ray diffraction and X-ray fluorescence were compared with Young modulus from sonic logs and Triaxial Compressive Strength Tests. The results showed the impact of clay content and porosity increase on Young's modulus reduction while carbonates (both calcite and dolomite) have stronger impact on elastic modulus growth, more than quartz, represented here mostly by detrital particles. Comparing the shales of similar composition in a few wells of different depths we concluded that differences in diagenesis and compaction due to variation in formation depth in a range of 1 km has negligible

Gabbroic lithologies of the dike-gabbro transition, Hole GT3A, Oman Drilling Project

Science.gov (United States)

Jesus, A. P. M.; Koepke, J.; Morishita, T.; Beinlich, A.; Johnson, K. T. M.; Greenberger, R. N.; Harris, M.; Michibayashi, K.; de Obeso, J. C.

2017-12-01

Hole GT3A intersects 400 m of oceanic crust providing unique insight into the dike-gabbro transition and the variability of the high level gabbros in the Samail ophiolite. Olivine gabbro and olivine bearing gabbro occur exclusively within the Upper Gabbro Sequence (16 % thickness; 111.02 m - 127.89 m) whereas oxide gabbro and disseminated oxide gabbro represent ca 5 % of the Lower Gabbro Sequence (233.84 m - 398.21 m). Gabbro with less than 1 vol. % olivine and oxide is the most common lithology in both Gabbro Sequences (10-13 %). Most gabbroic rocks were classified as "varitextured" due to textural and grain size macroscopic variations forming irregular domains/patches. Varitextured gabbros are medium-grained (1-5 mm), with seriate grain size distribution and subophitic/poikilitic to granular textural domains. Poikilitic domains comprise clinopyroxene with plagioclase chadacrysts, whereas in granular domains plagioclase interstices are filled by green-brown magmatic hornblende; plagioclase is zoned in both domains. Olivine (bearing) gabbros have 4-8 mm skeletal olivine pseudomorphs with roundish inclusions of chromite and plagioclase. Oxide (disseminated) gabbros comprise variable amounts of plagioclase, clinopyroxene, Oman paleo ridge.

Geology of the Cannonball Formation (Paleocene) in the Williston basin, with reference to uranium potential. Report of investigation No. 57

International Nuclear Information System (INIS)

Cvancara, A.M.

1976-01-01

The Paleocene Cannonball Formation is a marine, non-lignitic-bearing clastic sequence in the lower part of the Fort Union Group. It is overlain by the lignite-bearing Tongue River Formation in places and both overlain and underlain by the lignite-bearing Ludlow Formation in places. The Cannonball crops out primarily in southwest-central North Dakota and probably occurs throughout the western one-half of the state. It occurs also in northwestern South Dakota and may extend into parts of Saskatchewan and Manitoba. Poorly consolidated, very fine- to fine-grained, light to medium brownish yellow-weathering sandstone and light gray-weathering, sandy mudstone are the principal types of lithology. Mudstone generally predominates in North Dakota whereas sandstone seems to predominate in South Dakota. Although uranium in the Williston basin has been found almost entirely in lignite and nonmarine carbonaceous rocks, its occurrence in the marine Cannonball Formation is possible. If the Cannonball, Ludlow, Tongue River, and Sentinel Butte Formations are at least partly penecontemporaneous, a variety of depositional environments were in areal juxtaposition during the Paleocene. Streams originating or passing through coastal plain bogs could have carried uranium ions (derived from volcanic materials) to the Cannonball sea where they were deposited syngenetically. Epigenetic uranium may occur in Cannonball mudstones or sandstones that directly underlie the Ludlow Formation, which is known to contain volcanic materials

Geotechnical properties of La Arganosa Formation (Upper Cretaceous, Oviedo); Propiedades geotecnicas de la Formacion La Arganosa (Cretacico Superior, Oviedo)

Energy Technology Data Exchange (ETDEWEB)

Pando, L.; Gutierrez Claverol, M.; Flor-Blanco, G.

2011-07-01

It is performed the first geotechnical synthesis for La Arganosa Formation, the Cretaceous lithostratigraphic unit with very low geomechanical quality under the urban core of Oviedo; it also configures a major regional aquifer. In this study, geotechnical parameters of identification and condition, as well as physical and hydraulic ones, are compiled, statistically treated and interpreted. They were obtained from about 400 laboratory tests and more than 250 field tests around the city. The unit, of detrital origin, is bounded at the bottom and top by limestone lithologies, and is made up of soils and very soft rocks in alternating granular and cohesive layers. It discusses the main properties that define its geotechnical behavior: particle size distribution, plasticity, strength, compactness, consistency, compressibility, expansivity, collapsibility, permeability, and chemical aggressiveness of the materials and water. Furthermore, same numerical values are provided for reference forward guidance for future research to develop on this formation. (Author) 31 refs.

Laboratory column experiments for radionuclide adsorption studies of the Culebra dolomite member of the Rustler Formation

Energy Technology Data Exchange (ETDEWEB)

Lucero, D.A.; Heath, C.E. [Sandia National Labs., Albuquerque, NM (United States); Brown, G.O. [Oklahoma State Univ., Stillwater, OK (United States). Biosystems and Agricultural Engineering Dept.

1998-04-01

Radionuclide transport experiments were carried out using intact cores obtained from the Culebra member of the Rustler Formation inside the Waste Isolation Pilot Plant, Air Intake Shaft. Twenty-seven separate tests are reported here and include experiments with {sup 3}H, {sup 22}Na, {sup 241}Am, {sup 239}Np, {sup 228}Th, {sup 232}U and {sup 241}Pu, and two brine types, AIS and ERDA 6. The {sup 3}H was bound as water and provides a measure of advection, dispersion, and water self-diffusion. The other tracers were injected as dissolved ions at concentrations below solubility limits, except for americium. The objective of the intact rock column flow experiments is to demonstrate and quantify transport retardation coefficients, (R) for the actinides Pu, Am, U, Th and Np, in intact core samples of the Culebra Dolomite. The measured R values are used to estimate partition coefficients, (kd) for the solute species. Those kd values may be compared to values obtained from empirical and mechanistic adsorption batch experiments, to provide predictions of actinide retardation in the Culebra. Three parameters that may influence actinide R values were varied in the experiments; core, brine and flow rate. Testing five separate core samples from four different core borings provided an indication of sample variability. While most testing was performed with Culebra brine, limited tests were carried out with a Salado brine to evaluate the effect of intrusion of those lower waters. Varying flow rate provided an indication of rate dependent solute interactions such as sorption kinetics.

Inferring the lithology of borehole rocks by applying neural network classifiers to downhole logs: an example from the Ocean Drilling Program

Science.gov (United States)

Benaouda, D.; Wadge, G.; Whitmarsh, R. B.; Rothwell, R. G.; MacLeod, C.

1999-02-01

In boreholes with partial or no core recovery, interpretations of lithology in the remainder of the hole are routinely attempted using data from downhole geophysical sensors. We present a practical neural net-based technique that greatly enhances lithological interpretation in holes with partial core recovery by using downhole data to train classifiers to give a global classification scheme for those parts of the borehole for which no core was retrieved. We describe the system and its underlying methods of data exploration, selection and classification, and present a typical example of the system in use. Although the technique is equally applicable to oil industry boreholes, we apply it here to an Ocean Drilling Program (ODP) borehole (Hole 792E, Izu-Bonin forearc, a mixture of volcaniclastic sandstones, conglomerates and claystones). The quantitative benefits of quality-control measures and different subsampling strategies are shown. Direct comparisons between a number of discriminant analysis methods and the use of neural networks with back-propagation of error are presented. The neural networks perform better than the discriminant analysis techniques both in terms of performance rates with test data sets (2-3 per cent better) and in qualitative correlation with non-depth-matched core. We illustrate with the Hole 792E data how vital it is to have a system that permits the number and membership of training classes to be changed as analysis proceeds. The initial classification for Hole 792E evolved from a five-class to a three-class and then to a four-class scheme with resultant classification performance rates for the back-propagation neural network method of 83, 84 and 93 per cent respectively.

Anciet marble quarries in Lesvos island Greece

Science.gov (United States)

Mataragkas, M.; Mataragkas, D.

2009-04-01

ANCIENT MARBLE QUARRIES IN LESBOS ISLAND, GREECE Varti- Matarangas M.1 & Matarangas D. 1 Institute of Geological and Mining Exploration (IGME), Olympic Village, Entrance C, ACHARNAE 13677, GREECE myrsini@igme.gr , myrsini@otenet.g r A B S T R A C T Ten ancient marble quarries of Lesbos Island, most of them previously unknown, have been studied, in the frame of the research study on the ancient marble quarries in the Aegean Sea. In the present paper the geological, petrological and morphological features of the aforementioned quarries are examined. Concerning the six ancient quarries located in the areas of Tarti, Agia Paraskevi (Tsaf), Mageiras, Loutra, Latomi (Plomari) and Thermi, the authochthonous neopaleozoic unit constitutes their geological formation, while their hosting lithological formations are the included crystalline limestone lens like beds. In two ancient quarries in the areas Moria and Alyfanta, the geological formation is the authochthonous upper Triassic series and the hosting lithological formation the upper Triassic carbonate sequence, while in the areas of Akrasi-Abeliko and Karyni, the geological formation is the thrust Triassic unit and the lithological hosting formations are the included strongly deformed or not crystalline limestone lenticular beds. Furthermore, the petrographic features were also determined permitting the identification of the building stones that have been used.

Remedial Action Plan and Site Design for Stabilization of the Inactive Uranium Mill Tailings Sites at Slick Rock, Colorado: Appendix B to Attachment 3, Lithologic logs and monitor well construction information. Final report

International Nuclear Information System (INIS)

1995-09-01

This volume contains lithology logs and monitor well construction information for: NC processing site; UC processing site; and Burro Canyon disposal site. This information pertains to the ground water hydrology investigations which is attachment 3 of this series of reports

Stratigraphy of the Kapalga Formation north of Pine Creek and its relationship to base metal mineralization

International Nuclear Information System (INIS)

Goulevitch, J.

1980-01-01

The lithology, stratigraphy and mineralization of the Kapalga Formation (South Alligator Group) is described from the Margaret Syncline in the Pine Creek area of the Northern Territory of Australia. An interdigitation of carbonaceous siltstones and mudstones, chert, ashstones and tuffaceous chert, greywacke, siltstone, mudstone and minor banded iron formation (b.i.f.) characterises the Formation. These rocks define a vertical facies transition between low energy sediments of the underlying Koolpin Formation, and high energy sediments of the overlying Burrell Creek Formation. This transition is interlayered with numerous ashstone-tuffaceous chert horizons which were deposited during the waning stage of Gerowie Tuff sedimentation. The boundary between the Kapalga Formation of the South Alligator Group and the Burrell Creek Formation of the Finniss River Group is strictly conformable in this part of the Pine Creek 'Geosyncline'. Relict devitrified shards have been recognised in the Gerowie Tuff in the Margaret Syncline and these observations along with whole-rock chemical analyses conclusively support claims by previous investigators that these rocks are volcanic derivatives. Base metal mineralization at Iron Blow and Mt. Bonnie occurs as massive, stratiform, sulphide-silicate-carbonate lodes. The deposits are at the same stratigraphic level towards the base of the Kapalga Formation and minor stratification parallel with bedding has been observed. These features, and the association of the lodes with mud-flow breccias, lead to the conclusion that the lodes are syngenetic in origin. Thermochemical consideration of the sulphide assemblages together with the temporal relationship between the mineralization and Gerowie Tuff point to diagenetic devitrification of the underlying tuffaceous rocks as the source of the mineralization. Recent publications of experimental data from reaction of seawater and volcanic glass provide information which supports this thesis, and

Depositional Architecture of Late Cambrian-Early Ordovician Siliciclastic Barik Formation; Al Huqf Area, Oman

Science.gov (United States)

Abbasi, Iftikhar Ahmed

2017-04-01

Early Paleozoic siliciclastics sediments of the Haima Supergroup are subdivided into a number of formations and members based on lithological characteristics of various rock sequences. One of the distinct sandstone sequence, the Barik Formation (Late Cambrian-Early Ordovician) of the Andam Group is a major deep gas reservoir in central Oman. The sandstone bodies are prospective reservoir rocks while thick shale and clay interbeds act as effective seal. Part of the Barik Formation (lower and middle part) is exposed in isolated outcrops in Al Huqf area as interbedded multistoried sandstone, and green and red shale. The sandstone bodies are up to 2 meters thick and can be traced laterally for 300 m to over 1 km. Most of sandstone bodies show both lateral and vertical stacking. Two types of sandstone lithofacies are identified on the basis of field characteristics; a plane-bedded sandstone lithofacies capping thick red and green color shale beds, and a cross-bedded sandstone lithofacies overlying the plane-bedded sandstone defining coarsening upward sequences. The plane-bedded sandstone at places contains Cruziana ichnofacies and bivalve fragments indicating deposition by shoreface processes. Thick cross-bedded sandstone is interpreted to be deposited by the fluvial dominated deltaic processes. Load-casts, climbing ripples and flaser-bedding in siltstone and red shale indicate influence of tidal processes at times during the deposition of the formation. This paper summarizes results of a study carried out in Al Huqf area outcrops to analyze the characteristics of the sandstone-body geometry, internal architecture, provenance and diagenetic changes in the lower and middle part of the formation. The study shows build-up of a delta complex and its progradation over a broad, low-angle shelf where fluvial processes operate beside shoreface processes in a vegetation free setting. Keywords: Andam Group, Barik Formation, Ordovician sandstone, Al Huqf, Central Oman,

The source rock characters of U-rich granite

Energy Technology Data Exchange (ETDEWEB)

Mingyue, Feng; Debao, He [CNNC Key Laboratory of Uranium Resources Exploration and Evaluation Technology, Beijing Research Institute of Uranium Geology (China)

2012-03-15

This paper discusses the stratum composition, lithological association, uranium content of crust and the activation, migration, concentration of uranium at each tectonic cycle in South China. The authors point out that the source rock of U-rich granite is U-rich continental crust which is rich in Si, Al and K. The lithological association is mainly composed of terrestrial clastic rocks formation of mudstone and sandstone, mingled with intermediate-acidic, mafic pyroclastic rocks and carbonate rocks formation. During tectonic movements, the rocks had undergone regional metamorphism, migmatitization, granitization, and formed U-rich granites finally. (authors)

The source rock characters of U-rich granite

International Nuclear Information System (INIS)

Feng Mingyue; He Debao

2012-01-01

This paper discusses the stratum composition, lithological association, uranium content of crust and the activation, migration, concentration of uranium at each tectonic cycle in South China. The authors point out that the source rock of U-rich granite is U-rich continental crust which is rich in Si, Al and K. The lithological association is mainly composed of terrestrial clastic rocks formation of mudstone and sandstone, mingled with intermediate-acidic, mafic pyroclastic rocks and carbonate rocks formation. During tectonic movements, the rocks had undergone regional metamorphism, migmatitization, granitization, and formed U-rich granites finally. (authors)

Lithology and temperature: How key mantle variables control rift volcanism

Science.gov (United States)

Shorttle, O.; Hoggard, M.; Matthews, S.; Maclennan, J.

2015-12-01

Continental rifting is often associated with extensive magmatic activity, emplacing millions of cubic kilometres of basalt and triggering environmental change. The lasting geological record of this volcanic catastrophism are the large igneous provinces found at the margins of many continents and abrupt extinctions in the fossil record, most strikingly that found at the Permo-Triassic boundary. Rather than being considered purely a passive plate tectonic phenomenon, these episodes are frequently explained by the involvement of mantle plumes, upwellings of mantle rock made buoyant by their high temperatures. However, there has been debate over the relative role of the mantle's temperature and composition in generating the large volumes of magma involved in rift and intra-plate volcanism, and even when the mantle is inferred to be hot, this has been variously attributed to mantle plumes or continental insulation effects. To help resolve these uncertainties we have combined geochemical, geophysical and modelling results in a two stage approach: Firstly, we have investigated how mantle composition and temperature contribute to melting beneath Iceland, the present day manifestation of the mantle plume implicated in the 54Ma break up of the North Atlantic. By considering both the igneous crustal production on Iceland and the chemistry of its basalts we have been able to place stringent constraints on the viable temperature and lithology of the Icelandic mantle. Although a >100°C excess temperature is required to generate Iceland's thick igneous crust, geochemistry also indicates that pyroxenite comprises 10% of its source. Therefore, the dynamics of rifting on Iceland are modulated both by thermal and compositional mantle anomalies. Secondly, we have performed a global assessment of the mantle's post break-up thermal history to determine the amplitude and longevity of continental insulation in driving excess volcanism. Using seismically constrained igneous crustal

Using laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) to explore geochemical taphonomy of vertebrate fossils in the upper cretaceous two medicine and Judith River formations of Montana

Science.gov (United States)

Rogers, R.R.; Fricke, H.C.; Addona, V.; Canavan, R.R.; Dwyer, C.N.; Harwood, C.L.; Koenig, A.E.; Murray, R.; Thole, J.T.; Williams, J.

2010-01-01

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine rare earth element (REE) content of 76 fossil bones collected from the Upper Cretaceous (Campanian) Two Medicine (TMF) and Judith River (JRF) Formations of Montana. REE content is distinctive at the formation scale, with TMF samples exhibiting generally higher overall REE content and greater variability in REE enrichment than JRF samples. Moreover, JRF bones exhibit relative enrichment in heavy REE, whereas TMF bones span heavy and light enrichment fields in roughly equal proportions. TMF bones are also characterized by more negative Ce anomalies and greater U enrichment than JRF bones, which is consistent with more oxidizing diagenetic conditions in the TMF. Bonebeds in both formations show general consistency in REE content, with no indication of spatial or temporal mixing within sites. Previous studies, however, suggest that the bonebeds in question are attritional assemblages that accumulated over considerable time spans. The absence of geochemical evidence for mixing is consistent with diagenesis transpiring in settings that remained chemically and hydrologically stable during recrystallization. Lithology-related patterns in REE content were also compared, and TMF bones recovered from fluvial sandstones show relative enrichment in heavy REE when compared with bones recovered from fine-grained floodplain deposits. In contrast, JRF bones, regardless of lithologic context (sandstone versus mudstone), exhibit similar patterns of REE uptake. This result is consistent with previous reconstructions that suggest that channel-hosted microfossil bonebeds of the JRF developed via the reworking of preexisting concentrations embedded in the interfluve. Geochemical data further indicate that reworked elements were potentially delivered to channels in a recrystallized condition, which is consistent with rapid adsorption of REE postmortem. Copyright ?? 2010, SEPM (Society for

Review of mathematical models to describe the food salting process

Directory of Open Access Journals (Sweden)

Julián Andrés Gómez-Salazar

2015-01-01

Full Text Available El salado y posterior curado forman parte del procesado tradicional de conservación de carne y pescado. En él se añaden difere ntes conservantes (cloruro sódico, nitritos, nitratos, entre otros. En la actualidad se está aumentando el control sobre la cantid ad de sales añadidas y el tiempo de salado. Por ello es importante conocer los factores que controlan la penetración de sal y las condicio nes de proceso más adecuadas. Los mecanismos de transferencia de las s ales en el sólido son aspectos muy interesantes a considerar en las industrias de procesado de carne y pescado. Los modelos matemáticos son la mejor manera de conocer los factores controlantes e n estos procesos. Éstos representan y explican los datos observados y p redicen el comportamiento bajo diferentes condiciones. El objet ivo de este trabajo es describir el uso de modelos matemáticos para si milar el salado de carne y pescado y los beneficios derivados d e su uso. La mayoría de los modelos utilizados para describir el proceso de salado son difusionales, basados en la segunda ley de Fick, aun que también son utilizados los modelos empíricos. Para propósitos d e modelización debe ser garantizada una buena descripción de lo s resultados experimentales. La complejidad del modelo dependerá del objetivo a alcanzar será analizado en cada caso.

Groundwater flow in the Rustler Formation, Waste Isolation Pilot Plant (WIPP), southeast New Mexico (SENM). Interim report

International Nuclear Information System (INIS)

Gonzalez, D.D.

1983-03-01

In hypothetical breach scenarios for the WIPP, the Culebra Dolomite in the Rustler Formation has historically been considered the aquifer most likely to play a significant role in transporting radioisotopes to the biosphere. Recently, it was determined that breach scenarios involving connection of aquifers above and below the Salado Formation where waste emplacement is planned would not result in an upward flow of water into the Rustler aquifers. Considerable hydrologic investigation has focused on the Culebra, since some scenarios might result in contamination of this aquifer. In such events the Culebra would provide more rapid transport of radioisotopes from the WIPP than any of the other aquifers in the WIPP area. Hydrologic tests conducted in three-well arrays at four different locations near the WIPP are described. Tracer tests at the H-6 wells northwest of the WIPP indicated an effective porosity of 0.007 in the principal direction of flow and a dispersivity of 33 ft. At the H-2 wells, 1-1/4 mi W-SW of the center of the WIPP site, the effective porosity in the principal flow direction is 0.18 and the dispersivity is 17 ft. Anisotropy of transmissivity was determined from pumping tests at the H-4, H-5, and H-6 wells. The principal direction of transmissivity is roughly NW-SE at all three locations. The ratio of the major-to-minor transmissivity components varies only from 2.1 to 2.7, even though the transmissivity itself varies three orders of magnitude among the three locations. This information, coupled with transmissivity and head potential data, indicates that flow patterns near the WIPP site are toward the southeast. Present estimates for flow rates are 1 to 10 ft/y. Values of transmissivity for the Culebra vary six orders of magnitude over the extent of the study area, decreasing monotonically from 10 3 ft 2 /d in Nash Draw to 10 - 3 ft 2 /d on the east side of the WIPP site

Petrologic comparisons of Cayley and Descartes on the basis of Apollo 16 soils from stations 4 and 11

Science.gov (United States)

Basu, A.; Mckay, D. S.

1984-01-01

Petrologic aspects of the Cayley and Descartes formations are reviewed in the light of new data on Apollo 16 soils. Specific comparison of the modal abundances of lithic fragments in drive tube sample 64001/2 from the slopes of Stone Mountain (station 4) and in soil 67941 from the North Ray Crater rim (station 11) shows that melt rocks, especially poikilitic rocks, are more abundant at station 4 than at station 11; the reverse is true for fragmental breccias. Such lithologic differences suggest that stations 4 and 11 do not belong to the same geologic formation. Metamorphosed breccias are pervasive in both the formations and may represent a local component that has been reworked and diluted as fresh materials were added. Lithologic compositions inferred from the study of soil samples are different from lithologic compositions inferred from the study of rake samples or breccia clasts. This difference may be related to a mixing of material of different grain size distributions. The petrology of soils at the Apollo 16 site may not accurately reflect original material associated with either the Descartes or the Cayley formation because of extensive mixing with local material.

Hielo salado y helado casero

Directory of Open Access Journals (Sweden)

Franco Bagnoli

2016-04-01

Full Text Available Este experimento se presenta ante el público asistente a un evento científico acompañado por la lectura de un cómic. Así, de modo simpático se propicia la reflexión sobre un hecho físico bien conocido a nivel práctico y bastante utilizado, pero cuyos fundamentos físicos no siempre se comprenden: al introducir sal entre hielo se reduce la temperatura de la mezcla y se derrite el hielo.

Using Thermal Inactivation Kinetics to Calculate the Probability of Extreme Spore Longevity: Implications for Paleomicrobiology and Lithopanspermia

Science.gov (United States)

Nicholson, Wayne L.

2003-12-01

Thermal inactivation kinetics with extrapolation were used to model the survival probabilities of spores of various Bacillus species over time periods of millions of years at the historical ambient temperatures (25-40 °) encountered within the 250 million-year-old Salado formation, from which the putative ancient spore-forming bacterium Salibacillus marismortui strain 2-9-3 was recovered. The model indicated extremely low-to-moderate survival probabilities for spores of mesophiles, but surprisingly high survival probabilities for thermophilic spores. The significance of the results are discussed in terms of the survival probabilities of (i) terrestrial spores in ancient geologic samples and (ii) spores transported between planets within impact ejecta.

Progress in long-lived radioactive waste management and disposal at the waste isolation pilot plant

International Nuclear Information System (INIS)

Triay, I.R.; Matthews, M.L.; Eriksson, L.G.

2001-01-01

The Salado Formation is buried more than 350 m beneath the sands and cacti of the Chihuahuan Desert and hosts the Waste Isolation Pilot Plant (WIPP) deep geological repository at a depth of approximately 650 m. Since the WIPP repository is at least 10 years ahead of any other repository development for long-lived radioactive waste, other radioactive waste management organizations and institutions could benefit both scientifically and politically from sharing the lessons learned at WIPP. Benefits would include using existing expertise and facilities to cost-effectively address and solve program-specific issues and to train staff. The characteristics of the WIPP repository and infrastructure are described in this paper. (author)

Progress in long-lived radioactive waste management and disposal at the waste isolation pilot plant

Energy Technology Data Exchange (ETDEWEB)

Triay, I R; Matthews, M L [U.S. Dept. of Energy Carlsbad Field Office, New Mexico (United States); Eriksson, L G [GRAM, Inc., Albuquerque, NM (United States)

2001-07-01

The Salado Formation is buried more than 350 m beneath the sands and cacti of the Chihuahuan Desert and hosts the Waste Isolation Pilot Plant (WIPP) deep geological repository at a depth of approximately 650 m. Since the WIPP repository is at least 10 years ahead of any other repository development for long-lived radioactive waste, other radioactive waste management organizations and institutions could benefit both scientifically and politically from sharing the lessons learned at WIPP. Benefits would include using existing expertise and facilities to cost-effectively address and solve program-specific issues and to train staff. The characteristics of the WIPP repository and infrastructure are described in this paper. (author)

Review of mathematical models to describe the food salting process

OpenAIRE

Julián Andrés Gómez-Salazar; Gabriela Clemente-Polo; Neus Sanjuán-Pelliccer

2015-01-01

El salado y posterior curado forman parte del procesado tradicional de conservación de carne y pescado. En él se añaden difere ntes conservantes (cloruro sódico, nitritos, nitratos, entre otros). En la actualidad se está aumentando el control sobre la cantid ad de sales añadidas y el tiempo de salado. Por ello es importante conocer los factores que controlan la penetración de sal y las condicio nes de proceso más adecuadas. Los mecanismos de transferencia de las s ales en el sólido son a...

Evaluación de los efectos agudos en la función pulmonar por exposición a material particulado fino (MP 2.5) en niños que viven próximos a una playa contaminada con relaciones mineros, Chañaral, Chile

OpenAIRE

Cáceres Lillo, Dante Daniel

2015-01-01

Introducción: Producto de la gran actividad minera de la III Región de Atacama en el norte de Chile se vertieron al curso del rio El Salado millones de toneladas de relaves (con alto contenido de metales) sin tratamiento al curso del Rio Salado, los que fueron a dar a la bahía de la ciudad de Chañaral formando una extensa playa artificial. Estos relaves han producido un marcado efecto deletéreo sobre la flora y fauna marina del sector y en la calidad de vida de las poblaciones que...

Evaluación de los efectos agudos en la función pulmonar por exposición a material particulado fino (MP 2.5) en niños que viven próximos a una playa masivamente contaminada con relaves mineros, Chañaral, Chile

OpenAIRE

Cáceres Lillo, Dante Daniel

2015-01-01

Introducción: Producto de la gran actividad minera de la III Región de Atacama en el norte de Chile se vertieron al curso del rio El Salado millones de toneladas de relaves (con alto contenido de metales) sin tratamiento al curso del Rio Salado, los que fueron a dar a la bahía de la ciudad de Chañaral formando una extensa playa artificial. Estos relaves han producido un marcado efecto deletéreo sobre la flora y fauna marina del sector y en la calidad de vida de las poblaciones que viven adyac...

Method and apparatus for neutron induced gamma ray logging for lithology identification

International Nuclear Information System (INIS)

Oliver, D.W.; Culver, R.B.

1981-01-01

The patent describes a neutron-gamma well logging technique which can distinguish between sandstone and limestone formations irrespective of water salinity in the formation. The formation surrounding a borehole is irradiated by fast neutrons and the resulting gamma rays are counted. The gamma rays are converted to electrical signals in three distinct steps; the first two signals result from gamma rays associated with calcium content of the formation and the third signal from gamma rays associated with silicon content. Gamma rays resulting from irradiation of calcium are counted at two non-contiguous energy bands. (O.T.)

Defining in-situ stress magnitude and the responses of geology to stress anisotropy in heterogeneous lithologies for the United Kingdom

Science.gov (United States)

Kingdon, A.; Fellgett, M. W.; Williams, J. D. O.

2017-12-01

Exploitation of shale gas in the USA has led to interest in similar UK deposits. After tremors at the Preese Hall well in 2011, the process of hydraulic fracturing has become contentious. In-situ stress orientation controls the direction that fractures propagate from a well. World Stress Map (WSM) data coverage for the UK has historically been sparse. Improvements to the stress orientations for the UK are vital for reducing risk levels of induced seismicity. In some offshore basins, maximum horizontal stress (SHMax) is sub-parallel to major inverted Permo-Triassic faults, episodically reactivated during the Cenozoic, indicating a degree of structural control. Understanding for UK stress magnitude has been poor. Data for Northern England has been augmented with new estimates of vertical stress (Sv), minimum horizontal stress (Shmin) and pore pressure, focussed on potentially prospective basins east and west of the Pennines. Calculated values combined with legacy hydraulic fracturing and overcoring data show vertical stress gradients vary from 23 to 26 MPa/Km-1. Cheshire and Scotland show higher Shmin values by 2 MPa/Km-1 compared to Yorkshire and South East England. SHMax values exceeds the Sv which in turn exceeds Shmin indicating a predominantly strike slip environment. Pore pressure appears to be uniformly hydrostatic across the studied regions. There is some evidence above 1200 m depth of reverse faulting in igneous rocks in Cornwall, Leicestershire and Cumbria. Analysis of borehole imaging for the lithologically heterogeneous Carboniferous Coal Measures, highlights variability failure modes over confined vertical intervals. Breakouts are disproportionately located in "seatearths", palaeosols located stratigraphically beneath coal seams. Drilling induced tensile fractures are located within close proximity in overbank silt/clay facies and relatively massive channel sands that typically over and underlie coal deposits. Strength tests show that breakouts occur in

Sedimentology of the Upper Triassic-Lower Jurassic (?) Mosolotsane Formation (Karoo Supergroup), Kalahari Karoo Basin, Botswana

Science.gov (United States)

Bordy, Emese M.; Segwabe, Tebogo; Makuke, Bonno

2010-08-01

The Mosolotsane Formation (Lebung Group, Karoo Supergroup) in the Kalahari Karoo Basin of Botswana is a scantly exposed, terrestrial red bed succession which is lithologically correlated with the Late Triassic to Early Jurassic Molteno and Elliot Formations (Karoo Supergroup) in South Africa. New evidence derived from field observations and borehole data via sedimentary facies analysis allowed the assessment of the facies characteristics, distribution and thickness variation as well as palaeo-current directions and sediment composition, and resulted in the palaeo-environmental reconstruction of this poorly known unit. Our results show that the Mosolotsane Formation was deposited in a relatively low-sinuosity meandering river system that drained in a possibly semi-arid environment. Sandstone petrography revealed mainly quartz-rich arenites that were derived from a continental block provenance dominated by metamorphic and/or igneous rocks. Palaeo-flow measurements indicate reasonably strong, unidirectional current patterns with mean flow directions from southeast and east-southeast to northwest and west-northwest. Regional thickness and facies distributions as well as palaeo-drainage indicators suggest that the main depocenter of the Mosolotsane Formation was in the central part of the Kalahari Karoo Basin. Separated from this main depocenter by a west-northwest - east-southeast trending elevated area, an additional depocenter was situated in the north-northeast part of the basin and probably formed part of the Mid-Zambezi Karoo Basin. In addition, data also suggests that further northeast-southwest trending uplands probably existed in the northwest and east, the latter separating the main Kalahari Karoo depocenter from the Tuli Basin.

Geochemical Survey of Pernambuco

International Nuclear Information System (INIS)

Horowitz, A.; Duarte, P.J.; Almeida, M.G. de; Medeiros, M.O.

1988-01-01

The area studied i this work is located in a triangle formed by the Sibiro and Boca da Mata Sugar-Mills and Serinhaem country. In the Cabo Formation the search determinated conglomerates, arcos and clays. Although the highest geochemical activity have been done in the decomposed crystalin, and the values from Cabo Formation don't be encourager, this formation has lithology compatible with uranium mineralization. The Cabo Formation's sediments presents lithologic variations very expressives, with conglomerates, arcoses and clay silts, which determinate the choise of the area. This area presented favorable to uranium prospecting and to others elements interesting to ragional geochemistry. The atomic absorption analysis, fluorimetry and spectrometry were done for the following elements: Zn, V, Ti, Ni, Pb, Mn, Ga, Cu, Co, Bi, Ag, B, Mo, and U. (C.D.G.) [pt

Litho- and biostratigraphy of the Opalinus Clay and bounding formations in the Mont Terri rock laboratory (Switzerland)

International Nuclear Information System (INIS)

Hostettler, B.; Reisdorf, A. G.; Jaeggi, D.

2017-01-01

A 250 m-deep inclined well, the Mont Terri BDB-1, was drilled through the Jurassic Opalinus Clay and its bounding formations at the Mont Terri rock laboratory (NW Switzerland). For the first time, a continuous section from (oldest to youngest) the topmost members of the Staffelegg Formation to the basal layers of the Hauptrogenstein Formation is now available in the Mont Terri area. We extensively studied the drill core for lithostratigraphy and biostratigraphy, drawing upon three sections from the Mont Terri area. The macropaleontological, micropaleontological, and palynostratigraphical data are complementary, not only spatially but they also cover almost all biozones from the Late Toarcian to the Early Bajocian. We ran a suite of geophysical logs to determine formational and intraformational boundaries based on clay content in the BDB-1 well. In the framework of an interdisciplinary study, analysis of the above-mentioned formations permitted us to process and derive new and substantial data for the Mont Terri area in a straightforward way. Some parts of the lithologic inventory, stratigraphic architecture, thickness variations, and biostratigraphic classification of the studied formations deviate considerably from occurrences in northern Switzerland that crop out further to the east. For instance, with the exception of the Sissach Member, no further lithostratigraphic subdivision in members is proposed for the Passwang Formation. Also noteworthy is that the ca. 130 m-thick Opalinus Clay in the BDB-1 core is 20 m thinner than that equivalent section found in the Mont Terri tunnel. The lowermost 38 m of the Opalinus Clay can be attributed chronostratigraphically solely to the Aalensis Zone (Late Toarcian). Deposition of the Opalinus Clay began at the same time farther east in northern Switzerland (Aalensis Subzone, Aalensis Zone), but in the Mont Terri area the sedimentation rate was two or three orders of magnitude higher. (authors)

Litho- and biostratigraphy of the Opalinus Clay and bounding formations in the Mont Terri rock laboratory (Switzerland)

Energy Technology Data Exchange (ETDEWEB)

Hostettler, B. [Naturhistorisches Museum der Burgergemeinde Berne, Berne (Switzerland); Reisdorf, A. G. [Geologisch-Paläontologisches InstitutUniversität Basle, Basle (Switzerland); Jaeggi, D. [Swisstopo, Federal Office of Topography, Wabern (Switzerland); and others

2017-04-15

A 250 m-deep inclined well, the Mont Terri BDB-1, was drilled through the Jurassic Opalinus Clay and its bounding formations at the Mont Terri rock laboratory (NW Switzerland). For the first time, a continuous section from (oldest to youngest) the topmost members of the Staffelegg Formation to the basal layers of the Hauptrogenstein Formation is now available in the Mont Terri area. We extensively studied the drill core for lithostratigraphy and biostratigraphy, drawing upon three sections from the Mont Terri area. The macropaleontological, micropaleontological, and palynostratigraphical data are complementary, not only spatially but they also cover almost all biozones from the Late Toarcian to the Early Bajocian. We ran a suite of geophysical logs to determine formational and intraformational boundaries based on clay content in the BDB-1 well. In the framework of an interdisciplinary study, analysis of the above-mentioned formations permitted us to process and derive new and substantial data for the Mont Terri area in a straightforward way. Some parts of the lithologic inventory, stratigraphic architecture, thickness variations, and biostratigraphic classification of the studied formations deviate considerably from occurrences in northern Switzerland that crop out further to the east. For instance, with the exception of the Sissach Member, no further lithostratigraphic subdivision in members is proposed for the Passwang Formation. Also noteworthy is that the ca. 130 m-thick Opalinus Clay in the BDB-1 core is 20 m thinner than that equivalent section found in the Mont Terri tunnel. The lowermost 38 m of the Opalinus Clay can be attributed chronostratigraphically solely to the Aalensis Zone (Late Toarcian). Deposition of the Opalinus Clay began at the same time farther east in northern Switzerland (Aalensis Subzone, Aalensis Zone), but in the Mont Terri area the sedimentation rate was two or three orders of magnitude higher. (authors)

Ostracoda (Arthropoda, Crustacea from the Riachuelo Formation, Sergipe-Alagoas Basin, Brazil, Upper Aptian-Albian

Directory of Open Access Journals (Sweden)

Lucas Silveira Antonietto

2016-11-01

Full Text Available The Sergipe-Alagoas Basin has one of the most complete, exposed lithological successions of the Cretaceous period in the continental margin of Brazil. It captures several phases of the evolution of the South Atlantic Ocean, including rift, gulf and drift. The upper Aptian–Albian Riachuelo Formation corresponds to the first stages of the southern proto-Atlantic Ocean invasion in that basin. The present study reviews the taxonomic identification and ecology of 39 ostracod species of this formation, proposing a new genus – Gabonorygma gen. nov. – and three new species – Praebythoceratina deltalata sp. nov., Gabonorygma sergipana gen. et sp. nov. and Brachycythere smithsoniana sp. nov. Other taxa include Conchoecia? sp. 1, Cytherella sp. 1, C. besrineensis comb. nov., Cytherelloidea aff. globosa, C. btaterensis, Bairdoppilata sp. 1, Bairdoppilata sp. 2, B. comanchensis comb. nov., B. pseudoseptentrionalis, Robsoniella falklandensis, Cetacella sp. 1, Paracypris eniotmetos, Harbinia sinuata?, H. crepata, Liasina sp. 1, Praebythoceratina amsittenensis comb. nov., P. trinodosa comb. nov., Patellacythere sp. 1, P. shimonensis comb. nov., Xestoleberis? sp. 1, Xestoleberis? sp. 2, Apatocythere? sp. 1, Neocythere? aff. pseudovanveeni, N. (Physocythere tenuis, Aracajuia antiqua comb. nov., A. benderi, A. fragilis comb. nov., Eocytheropteron sp. 1, Metacytheropteron aff. minuta, Microceratina? sp. 1, M. azazoulensis, Veenia guianensis, Algeriana? sp. 1, Quasihermanites? sp. 1 and Sergipella viviersae.

Le Carbonifère du Maroc central : les formations de Migoumess, de Tirhela et d'Idmarrach. Lithologie, biostratigraphie et conséquences géodynamiquesThe Carboniferous formations of Migoumess, Tirhela and Idmarrach (central Morocco): lithology, biostratigraphy and geodynamic consequences

Science.gov (United States)

Berkhli, Mostafa; Vachard, Daniel

2002-01-01

New biostratigraphical data based on foraminifers, algae and pseudo-algae indicate that the limestone pebbles of the channelized polygenic conglomerates of the Migoumess formation contain Late Visean (V3b γ-V3c) assemblages. That confirms the Westphalian age attributed to this formation by Hollard [Zdt. Geol. Ges. 129 (1978) 495-512]. The Tournaisian age assigned to it by palynology [C. R. Acad. Sci. Paris, série II 310 (1990) 1573-1576] cannot be retained. The Tirhela formation, Late Visean and Serpukhovian (E1) in age, is coeval with the Akerchi formation [Berkhli, thèse d'État, 1999; Berkhli et al., J. Afr. Earth Sci. (accepté)]. The Idmarrach formation, mapped as a thrust sheet [C. R. Acad. Sci. Paris, série II 310 (1990) 1573-1576], is dated as Serpukhovian (E1) and its thrusting is consequently post-Serpukhovian. Palaeogeographic and geodynamic consequences are listed. To cite this article: M. Berkhli, D. Vachard, C. R. Geoscience 334 (2002) 67-72

El Paso Formation - a Lower Ordovician platform carbonate deposit

Energy Technology Data Exchange (ETDEWEB)

Clemons, R.E.

1987-05-01

The eastward-transgressive Lower Ordovician El Paso Formation conformably overlies Bliss Sandstone in southern New Mexico. Locally, lower El Paso was deposited on low hills of plutonic and volcanic rocks. The region subsided gradually throughout Canadian time, receiving the El Paso carbonate rock blanket up to 460 m thick. Lithologic and chronologic correlative rocks were deposited over most of the southwestern US as the first Paleozoic carbonate platform sequence. The El Paso Formation contains four members, listed here in ascending order: Hitt Canyon, Jose, McKelligon, and Padre. Gradually decreasing sand content upward through the Hitt Canyon indicates deepening water and/or greater distance to shore. Girvanella(.) oncolites are locally abundant. Stromatolite mounds near the top of the Hitt Canyon, combined with an influx of sand, ooids, and rounded bioclasts in the Jose Member, recorded a shoaling phase. The overlying McKelligon Member contains little or no sand, and sponge-Calathium mounds are prominent at some locales. Stromatolite mounds are interbedded with sponge-Calathium mounds in a few sections. Lower Padre Member beds are typically silty to sandy and locally contain thinly-laminated zones. The Padre contains more restricted fauna that includes traces of ostracods. Pervasive bioturbation of El Paso beds and fauna consisting of echinoderms, sponges, gastropods, trilobites, Nuia, Calathium, cephalopods, and algae plus minor brachiopods and Pulchrilamina indicate predominating shallow-subtidal environments. Low-energy platform environments, in which a large volume of micritic muds accumulated, were disturbed thousands of times by storms producing abundant thin, poorly washed biosparite, intrasparite, and intrasparrudite lenses.

Lithologic Coring in the Lower Anacostia Tidal Watershed, Washington, D.C., July 2002

Science.gov (United States)

Tenbus, Frederick J.

2003-01-01

Little is known about the volumetric flux of ground water to the lower tidal Anacostia River, or whether ground-water flow is an important component of the contaminant load in this part of the Anacostia River. The watershed is in the eastern part of Washington, D.C., and has been subjected to over 200 years of urbanization and modifications of the river channel and nearby land areas. These anthropogenic factors, along with tidal fluctuations in the river, make ground-water data collection and interpretations difficult. The U.S. Geological Survey is cooperating with the District of Columbia Department of Health, Environmental Health Administration, Bureau of Environmental Quality, Water Quality Division, in a study to assess nonpoint-source pollution from ground water into the lower tidal Anacostia River. Lithologic cores from drilling activities conducted during July 2002 in the study area have been interpreted in the context of geologic and hydrogeologic information from previous studies in the lower Anacostia tidal watershed. These interpretations can help achieve the overall project goals of characterizing ground-water flow and contaminant load in the study area. Hydrostratigraphic units encountered during drilling generally consisted of late Pleistocene to Holocene fluvial deposits overlying Cretaceous fluvial/deltaic deposits. Cores collected in Beaverdam Creek and the Anacostia River indicated high- and low-energy environments of deposition, respectively. Two cores collected near the river showed different types of anthropogenic fill underlain by low-energy deposits, which were in turn underlain by sand and gravel. A third core collected near the river consisted primarily of sand and gravel with no artificial fill.

Microbial reduction of uranium(VI) in sediments of different lithologies collected from Sellafield

International Nuclear Information System (INIS)

Newsome, Laura; Morris, Katherine; Trivedi, Divyesh; Atherton, Nick; Lloyd, Jonathan R.

2014-01-01

Highlights: • U(VI) (aq) mobility can be controlled by stimulating biogeochemical interactions. • Indigenous microbes in varied sediments reduced U(VI) to insoluble U(IV). • Sediment cell numbers and amount of bioavailable Fe(III) could limit this process. - Abstract: The presence of uranium in groundwater at nuclear sites can be controlled by microbial processes. Here we describe the results from stimulating microbial reduction of U(VI) in sediment samples obtained from a nuclear-licensed site in the UK. A variety of different lithology sediments were selected to represent the heterogeneity of the subsurface at a site underlain by glacial outwash deposits and sandstone. The natural sediment microbial communities were stimulated via the addition of an acetate/lactate electron donor mix and were monitored for changes in geochemistry and molecular ecology. Most sediments facilitated the removal of 12 ppm U(VI) during the onset of Fe(III)-reducing conditions; this was reflected by an increase in the proportion of known Fe(III)- and U(VI)-reducing species. However U(VI) remained in solution in two sediments and Fe(III)-reducing conditions did not develop. Sequential extractions, addition of an Fe(III)-enrichment culture and most probable number enumerations revealed that a lack of bioavailable iron or low cell numbers of Fe(III)-reducing bacteria may be responsible. These results highlight the potential for stimulation of microbial U(VI)-reduction to be used as a bioremediation strategy at UK nuclear sites, and they emphasise the importance of both site-specific and borehole-specific investigations to be completed prior to implementation

Resource Conservation and Recovery Act, Part B Permit Application

International Nuclear Information System (INIS)

1993-01-01

The Waste Isolation Pilot Plant (WIPP), which is designed for receipt, handling, storage, and permanent isolation of defense-generated transuranic wastes, is being excavated at a depth of approximately 655 m in bedded halites of the Permian Salado Formation of southeastern New Mexico. Site-characterization activities at the present WIPP site began in 1976. Full construction of the facility began in 1983, after completion of ''Site and Preliminary Design Validation'' (SPDV) activities and reporting. Site-characterization activities since 1983 have had the objectives of updating or refining the overall conceptual model of the geologic, hydrologic, and structural behavior of the WIPP site and providing data adequate for use in WIPP performance assessment. This report has four main objectives: 1. Summarize the results of WIPP site-characterization studies carried out since the spring of 1983 as a result of specific agreements between the US Department of Energy and the State of New Mexico. 2. Summarize the results and status of site-characterization and facility-characterization studies carried out since 1983, but not specifically included in mandated agreements. 3. Compile the results of WIPP site-characterization studies into an internally consistent conceptual model for the geologic, hydrologic, geochemical, and structural behavior of the WIPP site. This model includes some consideration of the effects of the WIPP facility and shafts on the local characteristics of the Salado and Rustler Formations. 4. Discuss the present limitations and/or uncertainties in the conceptual geologic model of the WIPP site and facility. The objectives of this report are limited in scope, and do not include determination of whether or not the WIPP Project will comply with repository-performance criteria developed by the US Environmental Protection Agency (40CFR191)

Resource Conservation and Recovery Act, Part B Permit Application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 4, Chapter D, Appendix D1 (beginning), Revision 3

Energy Technology Data Exchange (ETDEWEB)

Lappin, A. R.

1993-03-01

The Waste Isolation Pilot Plant (WIPP), which is designed for receipt, handling, storage, and permanent isolation of defense-generated transuranic wastes, is being excavated at a depth of approximately 655 m in bedded halites of the Permian Salado Formation of southeastern New Mexico. Site-characterization activities at the present WIPP site began in 1976. Full construction of the facility began in 1983, after completion of ``Site and Preliminary Design Validation`` (SPDV) activities and reporting. Site-characterization activities since 1983 have had the objectives of updating or refining the overall conceptual model of the geologic, hydrologic, and structural behavior of the WIPP site and providing data adequate for use in WIPP performance assessment. This report has four main objectives: 1. Summarize the results of WIPP site-characterization studies carried out since the spring of 1983 as a result of specific agreements between the US Department of Energy and the State of New Mexico. 2. Summarize the results and status of site-characterization and facility-characterization studies carried out since 1983, but not specifically included in mandated agreements. 3. Compile the results of WIPP site-characterization studies into an internally consistent conceptual model for the geologic, hydrologic, geochemical, and structural behavior of the WIPP site. This model includes some consideration of the effects of the WIPP facility and shafts on the local characteristics of the Salado and Rustler Formations. 4. Discuss the present limitations and/or uncertainties in the conceptual geologic model of the WIPP site and facility. The objectives of this report are limited in scope, and do not include determination of whether or not the WIPP Project will comply with repository-performance criteria developed by the US Environmental Protection Agency (40CFR191).

Episodic vein formation in Gale crater, Mars: evidence for an extended history of liquid water

Science.gov (United States)

Kronyak, R. E.; Fedo, C.; Banham, S.; Edgett, K. S.; Newsom, H. E.; Nachon, M.; Kah, L. C.

2017-12-01

The sedimentary rock record of Gale crater is consistent with deposition in an ancient lake basin. These strata represent aqueous and potentially habitable past conditions that existed over a relatively small part of Mars' geologic history. Post-depositional fluid migration is recorded by the presence of veins, which have been prevalent features throughout Curiosity's mission. These veins record later episodes of fluid flow and represent an extended history of liquid water stability, and perhaps habitability. White Ca-sulfate veins are observed in the Bradbury (Yellowknife Bay), Mount Sharp (Murray formation), and Siccar Point (Stimson formation) groups across a range of lithologies. At Yellowknife Bay and in the Stimson, Ca-sulfate veins characteristically exhibit mm-scale thicknesses. In the Pahrump Hills (PH) area, 62% of measured veins in the Murray formation are material occurs along the interface between wall rock and Ca-sulfate and is interpreted as a precursor vein fill. Gray veins at PH are more erosionally resistant relative to Ca-sulfate and average 1 mm in width. Additionally, gray veins exhibit elevated Mg and depleted Ca, distinguishing them compositionally from Ca-sulfate veins. Veins continue locally throughout the stratigraphic section. The lowermost Stimson sandstones at the Missoula outcrop contain white clasts and elevated Ca-sulfate, suggesting the formation of Murray veins prior to the deposition of the Stimson formation. Near the Old Soaker outcrop, bedding-parallel sulfate may represent syndepositional gypsum precipitation. In the context of time, the multiple vein systems identified in the Gale crater sedimentary fill shed light on the sequence and evolution of fluids responsible for their deposition. It is envisioned that sulfates first precipitated contemporaneously with the deposition of the Murray formation, followed by burial, lithification, and fracturing to form the earliest gray and sulfate veins. The Murray was then exhumed and

Monitoring electrical properties for improving the lithological and hydrological characterization of landslides

Science.gov (United States)

Malet, J. P.; Gance, J.; Lajaunie, M.; Gallistl, J.; Denchik, N.; Flores Orozco, A.; Ottowitz, D.; Supper, R.; Sailhac, P.; Gautier, S.; Schmutz, M.

2017-12-01

Imaging water flows in landslides is of critical importance as the distribution of pore-fluid pressures controls the dynamics (acceleration, deceleration) of the material. Detecting and imaging water is a difficult task, not only because of the complex topography and the small dimensions of the geological structures, but also because the landslide material consists of unsaturated porous and heterogeneous fractured media, leading to multi-scale water-flow properties. Further, these properties can change in time, in relation to temperature, rainfall and biological forcings. Electrical properties are relevant proxies of the sub-surface hydrological properties. In order to image water in landslide bodies, we propose to combine multi-frequency electrical and electromagnetic measurements using campaigns or permanent instruments, and surface/boreole investigations, installed on several unstable slopes in France. To evaluate the information gained from electrical properties for different geological conditions, we discuss electrical and electro-magnetic imaging results for data collected at four different landslides located in France (Super-Sauze and La Valette in the South East Alps, Lodève lin the southern border of the Massif Central Massif, and Séchilienne in the North French Alps). Time-lapse electrical DC resistivity observations, complex electrical conductivity (conduction and polarization/chargeability) measured by IP imaging methods, and controlled-source electromagnetic (CS-AMT) methods are discussed. Imaging results demonstrate an improved lithological characterization of the landslide structures (delineation of the sliding planes, identification of the fractures, discrimination of clay lenses with enhanced resolution); further, water infiltration within the soil matrix and/or the fractures is discriminated allowing better modelling of the hydrological regime of the landslides at the slope scale. This research is conducted in the frame of the project HYDROSLIDE

Spatial variations in fault friction related to lithology from rupture and afterslip of the 2014 South Napa, California, earthquake

Science.gov (United States)

Michael Floyd,; Richard Walters,; John Elliot,; Funning, Gareth J.; Svarc, Jerry L.; Murray, Jessica R.; Andy Hooper,; Yngvar Larsen,; Petar Marinkovic,; Bürgmann, Roland; Johanson, Ingrid; Tim Wright,

2016-01-01

Following earthquakes, faults are often observed to continue slipping aseismically. It has been proposed that this afterslip occurs on parts of the fault with rate-strengthening friction that are stressed by the mainshock, but our understanding has been limited by a lack of immediate, high-resolution observations. Here we show that the behavior of afterslip following the 2014 South Napa earthquake varied over distances of only a few kilometers. This variability cannot be explained by coseismic stress changes alone. We present daily positions from continuous and survey GPS sites that we re-measured within 12 hours of the mainshock, and surface displacements from the new Sentinel-1 radar mission. This unique geodetic data set constrains the distribution and evolution of coseismic and postseismic fault slip with exceptional resolution in space and time. We suggest that the observed heterogeneity in behavior is caused by lithological controls on the frictional properties of the fault plane.

History of geophysical studies at the Waste Isolation Pilot Plant (WIPP), southeastern New Mexico

International Nuclear Information System (INIS)

Borns, D.J.

1997-01-01

A variety of geophysical methods including the spectrum of seismic, electrical, electromagnetic and potential field techniques have supported characterization, monitoring and experimental studies at the Waste Isolation Pilot Plant (WIPP). The geophysical studies have provided significant understanding of the nature of site deformation, tectonics and stability. Geophysical methods have delineated possible brine reservoirs beneath the underground facility and have defined the disturbed rock zone that forms around underground excavations. The role of geophysics in the WIPP project has evolved with the project. The early uses were for site characterization to satisfy site selection criteria or factors. As the regulatory framework for WIPP grew since 1980, the geophysics program supported experimental and field programs such as Salado hydrogeology and underground room systems and excavations. In summary, the major types of issues that geophysical studies addressed for WIPP are: Site Characterization; Castile Brine Reservoirs; Rustler/Dewey Lake Hydrogeology; Salado Hydrogeology; and Excavation Effects. The nature of geophysics programs for WIPP has been to support investigation rather than being the principal investigation itself. The geophysics program has been used to define conceptual models (e.g., the Disturbed Rock Zone-DRZ) or to test conceptual models (e.g., high transmissivity zones in the Rustler Formation). The geophysics program primarily supported larger characterization and experimental programs. Funding was not available for the complete documentation and interpretation. Therefore, a great deal of the geophysics survey information resides in contractor reports

Lithological Effects on Evaporation and Direct Infiltration Through the Unsaturated Zone in Damascus Oasis (Syria)

International Nuclear Information System (INIS)

Abou zakhem, B.

2004-01-01

Soil water movement is directly affected by the lithology and texture of soil profile. The objective of this study is to determine water movement mechanism through the unsaturated zone, by estimating the direct infiltration rate and evaporation process in Damascus Oasis, using isotope techniques. Two soil profiles were drilled using a hand-auger. Soil samples were subjected to granulometry, mineralogy, chemical and isotopic analysis. Isotopic measurements indicate that the evaporation front is located at shallow depth between 0 and 2 m. Variations in isotopic content indicate to the alternation of wet and dry periods corresponding to infiltration and evaporation processes respectively. Results show considerable difference in isotopic content between the unsaturated zone and the groundwater, which is mainly attributed to limited recharge of the aquifer through the unsaturated. Whereas the indirect groundwater recharge is considered to be more predominant. Chloride concentration correspond to stable isotopes in the unsaturated zone, it increases proportionally with the evaporation rate. Using chemical balance of Chloride, it was possible to estimate the effective recharge average rate which is ranging between 1.8 mm/y and 0.45 mm/y. The calculated mean evaporation rate according to Barnes and Allison model is 18.1 mm/y at water table level of 3 m depth. This rate decreases to 2.4 mm/y at 6 m depth. (author)

Sedimentary facies and lithologic characters as main factors controlling hydrocarbon accumulations and their critical conditions

Directory of Open Access Journals (Sweden)

Jun-Qing Chen

2015-10-01

Full Text Available Taking more than 1000 clastic hydrocarbon reservoirs of Bohai Bay Basin, Tarim Basin and Junggar Basin, China as examples, the paper has studied the main controlling factors of hydrocarbon reservoirs and their critical conditions to reveal the hydrocarbon distribution and to optimize the search for favorable targets. The results indicated that the various sedimentary facies and lithologic characters control the critical conditions of hydrocarbon accumulations, which shows that hydrocarbon is distributed mainly in sedimentary facies formed under conditions of a long-lived and relatively strong hydrodynamic environment; 95% of the hydrocarbon reservoirs and reserves in the three basins is distributed in siltstones, fine sandstones, lithified gravels and pebble-bearing sandstones; moreover, the probability of discovering conventional hydrocarbon reservoirs decreases with the grain size of the clastic rock. The main reason is that the low relative porosity and permeability of fine-grained reservoirs lead to small differences in capillary force compared with surrounding rocks small and insufficiency of dynamic force for hydrocarbon accumulation; the critical condition for hydrocarbon entering reservoir is that the interfacial potential in the surrounding rock (Φn must be more than twice of that in the reservoir (Φs; the probability of hydrocarbon reservoirs distribution decreases in cases where the hydrodynamic force is too high or too low and when the rocks have too coarse or too fine grains.

Lithological and petrophysical properties and prospects of oil and gas presence of Kalinsky series in Absheron

International Nuclear Information System (INIS)

Kheirov, M.B; Dilbazi, Z.H; Askerov, F.H; Imanov, A.D

2002-01-01

Full text: The presentation is dedicated to summarizing the results of studying lithological and petrographic peculiarities and petrophysical properties of relatively scarcely studied rocks of lower Pliocene Kalinsky Series in Absheron, particularly its lower horizons, as well as to determining the regularities of these properties change about the area, as well as along the geological section.These generalizations cover the areas of Gala, Turkany,Gala-Dubendy,Govsany,Garachukhur, Bina, Zykh, Peschany island, Chilov, Khali, Gryazevaya sopka, Pirallakhy, and they are necessary for determining the direction of exploration and increasing the efficiently of productive horizons development.Kalinsky series (KaS) is represented mostly by the alternation of siltstones,sandstones and shale and subjected to lithofacial changes along the section and about the area.Within the area under analysis the Kalinsky series thickness is changeable and decreases towards north-west (the crest), besides it pinches out, thus promoting lithostratigraphical traps occurrence. In this direction the arenosity of reservoir rocks increases.The The exposure of the 4-th and 5-th horizons of Kalinsky series in Peschany Island, Zyrya and Gryazevaya sopka gives us an opportunity to expect the occurrence of the corresponding formations in other areas as well. In the reservoir sections studied Kalinsky series is mostly of polymictic composition and is represented by badly sorted rocks.the sorting coefficient is within the range 2,5-4,7.Sands and sandstones occur relatively seldom.Silt fraction mostly prevails in their granulometric composition.The sand fraction content is close to the content of silt fraction in Surakhany, Garachukhur, Gum adasy, Zykh and Govsany (Fig.1).The reservoir rocks clayiness ranges within 12%-35%.Pelite fraction is the smallest in Surakhany, Peschany Island and Bina, while in Turkany, Gala, Gala-dubendy, Turkany-deniz and Gryazevaya sopka this fraction increases, attaining 28

Effects of host rock stratigraphy on the formation of ring-faults and the initiation of collapse calderas

International Nuclear Information System (INIS)

Kinvig, H S; Geyer, A; Gottsmann, J

2008-01-01

Most collapse calderas can be attributed to subsidence of the magma chamber roof along bounding sub-vertical normal faults (ring-faults) after a decompression of the magma chamber, following eruption. Here, we present new numerical models that use a Finite Element Method to investigate the effects of variable crustal stratigraphy (lithology/thickness/order of strata) above a magma chamber, on local stress field distribution and how these in turn compare with existing criteria for ring-fault initiation. Results indicate that the occurrence and relative distribution of mechanically different lithologies may be influential in generating or inhibiting caldera collapse.

Effects of host rock stratigraphy on the formation of ring-faults and the initiation of collapse calderas

Energy Technology Data Exchange (ETDEWEB)

Kinvig, H S; Geyer, A; Gottsmann, J [Department of Earth Sciences, University of Bristol, Wills Memorial Building, Queen' s Road, BS8 1RJ, Bristol (United Kingdom)

2008-10-01

Most collapse calderas can be attributed to subsidence of the magma chamber roof along bounding sub-vertical normal faults (ring-faults) after a decompression of the magma chamber, following eruption. Here, we present new numerical models that use a Finite Element Method to investigate the effects of variable crustal stratigraphy (lithology/thickness/order of strata) above a magma chamber, on local stress field distribution and how these in turn compare with existing criteria for ring-fault initiation. Results indicate that the occurrence and relative distribution of mechanically different lithologies may be influential in generating or inhibiting caldera collapse.

Khadum Formation of Pre-Caucasus region as potential source of oil shales: geology and geochemistry

Directory of Open Access Journals (Sweden)

N.Sh. Yandarbiev1

2017-05-01

Full Text Available One of the main modern aim for oil industry is the development of hydrocarbon extraction technologies from «oil shale». In Russia there are kerogen-saturated carbonate-clayey-siliceous deposits of the Bazhenov Formation, carbonate rocks of the Volga-Ural and Timan-Pechora oil and gas bearing basins and clayey Maikop series of Pre-Caucasus region. The Khadum Formation is lower part of the Maikop series represented by carbonate-clay and clayey deposits. On the basis of long-term field and laboratory investigation conducted by specialists of the Oil and Gas Department from Geological Faculty of the Lomonosov Moscow State University. a comprehensive study of the lithological composition, structure, geochemical, hydrogeological and hydrodynamic characteristics of the Paleogene section and monitoring of the drilled wells, the prospects of the oil and gas potential of the Khadum deposits of the Oligocene in the Eastern Pre-Caucasus oil and gas bearing basin were estimated. 11 gas and 19 oil deposits are discovered within the Khadum deposits, and they are confined to the sand layers and lenses, but most of the Khadum section belongs to «unconventional» sources of hydrocarbons. Based on the integrated approach, a map of oil and gas potential prospects for the Khadum deposits was constructed. Highly prospective territories for drilling for oil, areas with small and medium perspectives, and gas prospecting areas have been singled out. Recommendations are given for drilling and technology for the development of the Pre-Caucasus oil shales, based on the world experience in the development of such formations.

Fault zones as barriers to, or conduits for, fluid flow in argillaceous formations. A microstructural and petrophysical perspective

International Nuclear Information System (INIS)

Clennell, M.B.; Knipe, R.J.; Fisher, Q.J.

1998-01-01

To improve quantitative predictions of the hydrogeological impact of faults, it is necessary to understand the relationship between the mechanics of rock deformation and the evolution of petrophysical properties. A wide range of fault rocks was analysed, many of the findings and techniques can be applied to lower permeability environments. During fault slip, the microstructure of intact rock is changed by mechanical and chemical processes that together constitute the deformation mechanisms through which the rock volume around and within the fault is strained. Deformation mechanisms all act to reduce porosity and permeability of fault rocks with respect to their precursor lithology. Even thin layers of high permeability may act as important flow pathways, and the potential for fault zones to seal or inter-link high-permeability domains must be taken into account when assessing the suitability of a particular formation for long-term waste disposal. (R.P.)

27 CFR 9.163 - Salado Creek.

Science.gov (United States)

2010-04-01

... Patterson Quadrangle map, section 19, T6S, R8E, at the intersection of Interstate Highway 5 and Fink Road... miles along the aqueduct to its intersection with Fink Road in section 19, T6S, R8E; then (11) Follow Fink Road northwest for approximately 0.5 miles, returning to the beginning point at the intersection...

The dynamics of sediment size and transient erosional signals in heterogeneous lithologies

Science.gov (United States)

Lyons, N. J.; Gasparini, N. M.; Crosby, B. T.; Wehrs, K.; Willenbring, J. K.

2017-12-01

preservation of a base level change signal in low order streams. This result implies that transient erosion signals inferred using topography can be transformed or destroyed in certain lithologies, complicating efforts to infer climatic and tectonic history from topography.

Research on sequence stratigraphy of Shuixigou group, jurassic in Yili basin

International Nuclear Information System (INIS)

Li Shengfu; Wang Guo; Wei Anxin; Qi Junrang; Zhang Zhongwang

2006-01-01

The Shuixigou Group, Jurassic in Yili basin is a set of coal-bearing clastic formation formed under basically consistent tectonic stress and sedimentary environment. In the middle of the Group (Sangonghe Formation) abrupt changes appear in the lithology and the colour of rocks, and an abrupt turning in logging curve appears correspondingly. Using the point view of sequence stratigraphy, the authors analyse the above phenomenon in aspects of the chrono-stratigraphy, the lithology, the sedimentary system tract, the sedimentary rhythum, as well as the interpretation of logging curves, and suggest that a unconformity surface (or a sequence boundary) exists in the middle of the Group, and try make a re-division of sequence stratigraphy for the Shuixigou Group. (authors)

Caldera formation and varied eruption styles on North Pacific seamounts: the clastic lithofacies record

Science.gov (United States)

Portner, Ryan A.; Clague, Dave A.; Paduan, Jennifer B.

2014-08-01

Detailed examination of volcaniclastic and sedimentary rocks collected from the Taney (30 Ma), President Jackson (4 Ma), Vance (3 Ma) and Alarcon (2 Ma) near-ridge seamount chains of the North Pacific reveals seven clastic lithofacies that record various modes of eruption, magma fragmentation, and particle dispersal. Lithofacies are distinguished by differences in lithology, bedding habit, compositional heterogeneity, and relationship to volcanic landforms. Breccia lithofacies were produced through mechanical fragmentation during caldera collapse (polymict) or effusive eruptions onto steep slopes (monomict). Rare globular lapilli mudstone lithofacies contain clasts with morphologies formed by magma-sediment mingling processes (peperite). Seamount summit pyroclastic deposits include proximal lapilli tuff with vesicular pyroclasts, and more distal limu o Pele tuff lithofacies. Much finer-grained hydrothermal mudstone/tuff lithofacies occurs around caldera rims and contains greenschist minerals, hydrothermal clays and basaltic ash that record subsurface phreatomagmatic fragmentation processes. Very fine-grained ash is transported to distal regions by oceanic currents and hydrothermal plumes, and is a component of the regional pelagic sediment budget. Pyroclastic lithofacies only occur on seamount summits suggesting formation during the latter stages of seamount evolution. As a seamount drifts away from an adjacent ridge axis and associated heat source, its magma supply is reduced allowing for magmatic gas buildup and mild explosive eruptions. During this stage, the diminished melt supply under the seamount is unable to fully compensate for extension along the ridge axis and vertical seamount growth. Lateral intrusion into spreading-related structures in this stage causes magma withdrawal and caldera formation. Formation of caldera ring faults also promotes seawater ingress into subseafloor hydrothermal cells, which interact with magma conduits causing phreatomagmatic

Lithological and petrophysical properties and prospects of oil and gas presence of Kalinsky series in Absheron

International Nuclear Information System (INIS)

Kheirov, M.B; Dilbazi, Z.H; Askerov, F.H; Imanov, A.D.

2002-01-01

Full text:The presentation is is dedicated to summarizing the results of studying lithological and petrographic peculiarities and petrophysical properties of relatively scarcely studied rocks of lower Pliocene Kalinsky Series in Absheron, particularly its lower horizons, as well as to determining the regularities of these properties change about the area, as well as along the geological section. These generalisation cover the areas of Gala, Turkany, Gala-Dubendy, Govsany, Garachukhur, Bina, Zykh, Peschany island, Chilov, Khali, Gryazevaya sopka, Pirallakhy, and they are necessary for determining the direction of exploration and increasing the efficiency of productive horizons development. Kalinsky series is represented mostly by the alternation of siltstones, sandstones and shale and subjected to lithofacial changes along the section and about the area. In the reservoir sections studied Kalinsky series is mostly of polymetallic composition and is represented by badly sorted rocks. The sorting coefficient is within the range 2.5-4.7. Sands and sandstones occur relatively seldom. Thus, Kalinsky series, and its lower horizons in particular are scarcely studied. In some areas these horizons in particular are scarcely studied. In some areas horizons are not exposed. That is why for the purpose of oil and gas presence degree clarification it is necessary to resume exploration in Absheron oil and gas bearing region Kalinsky series, and in particular in its lower horizons

Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 6. Baseline rock properties-shale

International Nuclear Information System (INIS)

1978-04-01

This volume, Y/OWI/TM36/6 Baseline Rock Properties--Shale, is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-36'' which supplements a ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44.'' The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. The report is a result of a literature survey of the rock properties of shales occurring in the United States. Firstly, data were collected from a wide variety of sources in order to obtain a feel for the range of properties encountered. Secondly, some typical shales were selected for detailed review and these are written up as separate chapters in this report. Owing to the wide variability in lithology and properties of shales occurring in the United States, it became necessary to focus the study on consolidated illite shales. Using the specific information already generated, a consistent set of intact properties for a typical, consolidated illite shale was obtained. Correction factors, largely based on geological considerations, were then applied to the intact data in order to yield typical rock mass properties for this type of shale. Lastly, excavation problems in shale formations were reviewed and three tunnel jobs were written up as case histories

Geomechanical analyses to investigate wellbore/mine interactions in the Potash Enclave of Southeastern New Mexico.

Energy Technology Data Exchange (ETDEWEB)

Ehgartner, Brian L.; Bean, James E. (Sandia Staffing Alliance, LLC, Albuquerque, NM); Arguello, Jose Guadalupe, Jr.; Stone, Charles Michael

2010-04-01

Geomechanical analyses have been performed to investigate potential mine interactions with wellbores that could occur in the Potash Enclave of Southeastern New Mexico. Two basic models were used in the study; (1) a global model that simulates the mechanics associated with mining and subsidence and (2) a wellbore model that examines the resulting interaction impacts on the wellbore casing. The first model is a 2D approximation of a potash mine using a plane strain idealization for mine depths of 304.8 m (1000 ft) and 609.6 m (2000 ft). A 3D wellbore model then considers the impact of bedding plane slippage across single and double cased wells cemented through the Salado formation. The wellbore model establishes allowable slippage to prevent casing yield.

The formation mechanism and prognosis on the prospect of pegmatite type uranium deposit in Eastern Qinling of China

Energy Technology Data Exchange (ETDEWEB)

Mingyue, Feng; Jiashu, Rong; Zhifu, Sun; Ziyang, Xu; Hongjie, Xie [Beijing Research Inst. of Uranium Geology (China); Qifeng, Liu [North-West of Geologic Exploration of Nuclear Industry, Xi` an (China)

1996-12-01

Lithologies of Qinling Group are composed of pelite-felsic metamorphic rocks, basic metamorphic rocks and calcareous metamorphic rocks. The Pelite-felsic metamorphic rocks account for the most part of the sequence and the bulk of the Qinling Group. The Pelite-felsic metamorphic rocks associated with uranium-hosting pegmatite are characterized by high content of SiO{sub 2} and alkali, higher content of potassium than that of sodium, and moderate content of uranium. The granites in Eastern Qinling can be divided into two genetic types, i.e. I-type and S-type. Three types of pegmatites located in the study region can be attributed to one series of unified evolution of remelting magma and are connected with each other, as well as differ from each other. They resulted from partial melting of Qinling Group. Uhosting pegmatite is the new U-hosting body. The pegmatite-type uranium deposit are of new type too. The formation of such deposit is attributed to gaseous transfer differentiation. The plate subduction of recent tectonic regime, the dome-formed granite Massif, the pegmatite vein system that resulted from the metamorphism of Qinling Group occurred in Qinling during Early Paleozoic are the main conditions for the formation of pegmatite-type uranium deposits. (5 refs., 10 tabs.).

The formation mechanism and prognosis on the prospect of pegmatite type uranium deposit in Eastern Qinling of China

International Nuclear Information System (INIS)

Feng Mingyue; Rong Jiashu; Sun Zhifu; Xu Ziyang; Xie Hongjie; Liu Qifeng

1996-12-01

Lithologies of Qinling Group are composed of pelite-felsic metamorphic rocks, basic metamorphic rocks and calcareous metamorphic rocks. The Pelite-felsic metamorphic rocks account for the most part of the sequence and the bulk of the Qinling Group. The Pelite-felsic metamorphic rocks associated with uranium-hosting pegmatite are characterized by high content of SiO 2 and alkali, higher content of potassium than that of sodium, and moderate content of uranium. The granites in Eastern Qinling can be divided into two genetic types, i.e. I-type and S-type. Three types of pegmatites located in the study region can be attributed to one series of unified evolution of remelting magma and are connected with each other, as well as differ from each other. They resulted from partial melting of Qinling Group. Uhosting pegmatite is the new U-hosting body. The pegmatite-type uranium deposit are of new type too. The formation of such deposit is attributed to gaseous transfer differentiation. The plate subduction of recent tectonic regime, the dome-formed granite Massif, the pegmatite vein system that resulted from the metamorphism of Qinling Group occurred in Qinling during Early Paleozoic are the main conditions for the formation of pegmatite-type uranium deposits. (5 refs., 10 tabs.)

Formation mechanism of land subsidence in the North China Plain

Science.gov (United States)

Guo, Haipeng; Cheng, Guoming

2014-05-01

Land subsidence is a progressive and gradual geological disaster, whose development is irreversible. Due to rapid development of industrialization and urbanization, land subsidence occurs commonly in the North China Plain, and has become the main environmental factor impacting sustainable economic and social development. This study presents a brief review on the current situation of land subsidence in the North China Plain. Then the hydrologic, hydrogeologic and anthropogenic conditions favorable for the formation of land subsidence are analyzed, indicating that the formation of land subsidence is mainly determined by local geological condition and enabling conditions, e.g. long-term excessive exploitation of groundwater and engineering construction. A correlation analysis was conducted in both the North China Plain and Cangzhou region, a typical area where severe land subsidence occurs, of the quantitative relationship between deep groundwater yield and the land subsidence. The analysis results indicate that the land subsidence volume accounts for 40% to 44% of deep water yield in the North China Plain, indirectly showing the proportion of released water from compressibility of the aquifer and the aquitard in deep groundwater yield. In Cangzhou region, this proportion was calculated as 58%, far greater than that of the North China Plain. This is induced by the local lithologic structure and recharge condition of deep groundwater in Cangzhou region. The analysis of soil samples in Cangzhou region shows that strong relations exist among different physical parameters, and good change laws of compression with depth and pressure are found for soil samples. The hydraulic conductivities of clay are six orders of magnitude greater than those of the aquifer, implying the strong hypothesis of land subsidence. This analysis provides data and scientific basis for further study on formation mechanism of land subsidence in Cangzhou region and objective evaluation of its

Characterization of samples of a cement-borehole plug in bedded evaporites

International Nuclear Information System (INIS)

Scheetz, B.E.; Grutzeck, M.W.; Wakeley, L.D.; Roy, D.M.

1979-07-01

This report describes the laboratory characterization of a section of an eighteen-year-old cement-based plug emplaced to seal a four-inch (ten-centimeter) borehole in the Salado Formation near Carlsbad, NM. The dominantly halite salt strata contain a horizon rich in potassium-bearing minerals such as langbeinite, in the plug region. Other host rock minerals identified include illite, kainite, magnesite, syngenite and polyhalite. Identified in the plug were: the cement phase calcium silicate hydrate (C-S-H having an intermediate degree of crystallinity), Friedel's salt, halite, sylvite and portlandite. The plug, though intact, unfractured on a macroscale, and forming an adequate physical bond with the salt formation, was weak and permeable relative to the surrounding bedded salt. Characterization of the plug and rock was carried out by a combination of measurements: compressive strength, permeability, density and porosity, thermal measurements (DTA, TGA), x-ray diffractometry, SEM and optical (including thin section) microscopy, and energy-dispersive x-ray analysis for chemical composition

Great earthquakes along the Western United States continental margin: implications for hazards, stratigraphy and turbidite lithology

Science.gov (United States)

Nelson, C. H.; Gutiérrez Pastor, J.; Goldfinger, C.; Escutia, C.

2012-11-01

We summarize the importance of great earthquakes (Mw ≳ 8) for hazards, stratigraphy of basin floors, and turbidite lithology along the active tectonic continental margins of the Cascadia subduction zone and the northern San Andreas Transform Fault by utilizing studies of swath bathymetry visual core descriptions, grain size analysis, X-ray radiographs and physical properties. Recurrence times of Holocene turbidites as proxies for earthquakes on the Cascadia and northern California margins are analyzed using two methods: (1) radiometric dating (14C method), and (2) relative dating, using hemipelagic sediment thickness and sedimentation rates (H method). The H method provides (1) the best estimate of minimum recurrence times, which are the most important for seismic hazards risk analysis, and (2) the most complete dataset of recurrence times, which shows a normal distribution pattern for paleoseismic turbidite frequencies. We observe that, on these tectonically active continental margins, during the sea-level highstand of Holocene time, triggering of turbidity currents is controlled dominantly by earthquakes, and paleoseismic turbidites have an average recurrence time of ~550 yr in northern Cascadia Basin and ~200 yr along northern California margin. The minimum recurrence times for great earthquakes are approximately 300 yr for the Cascadia subduction zone and 130 yr for the northern San Andreas Fault, which indicates both fault systems are in (Cascadia) or very close (San Andreas) to the early window for another great earthquake. On active tectonic margins with great earthquakes, the volumes of mass transport deposits (MTDs) are limited on basin floors along the margins. The maximum run-out distances of MTD sheets across abyssal-basin floors along active margins are an order of magnitude less (~100 km) than on passive margins (~1000 km). The great earthquakes along the Cascadia and northern California margins cause seismic strengthening of the sediment, which

Conservación del plancton y protección de las cuencas hídricas. El caso de la Cuenca Inferior del Río del Salado, Provincia de Buenos Aires, Argentina

Directory of Open Access Journals (Sweden)

Néstor Gabellone

2013-10-01

Full Text Available A diferencia de los principios para la conservación de recursos bióticos terrestres o marinos, en la conservación de recursos hídricos no se asigna importancia a los componentes bióticos y ninguna al plancton. Pocas de las miles de especies identificadas en esta comunidad figuran en una lista de especies en peligro o amenazadas dela Unión Internacionalparala Conservacióndela Naturaleza(UICN. Por ende, a nivel mundial no se les concede ningún tipo de protección. Desde la década del 1990, en ecología y biogeografía diferentes autores, han enfatizado la necesidad de reconocer la biodiversidad en relación al funcionamiento de los ecosistemas. En este sentido cabe plantearse los siguientes cuestionamientos: ¿Los organismos acuáticos, principalmente del plancton, merecen ser considerados objetos de conservación? ¿Mantener la integridad ecológica de los cuerpos de agua es suficiente para su conservación?La Cuencadel Río Salado, localizada en la provincia de Buenos Aires, transporta excesos de agua y nutrientes durante inundaciones hacia la Bahía Samborombón  (un Sitio Ramsar. A pesar de períodos de sequía e inundación, los cambios de la salinidad producto de la influencia marina y el aporte de efluentes agropecuarios, los ambientes acuáticos mantienen un aceptable grado de conservación y biodiversidad. La estructura del plancton se mantiene dominada por clorofitas unicelulares, rotíferos Brachionidae y ciliados tintínidos en la cuenca inferior y crustáceos en sectores vinculados a ambientes lénticos. La comunidad planctónica es compleja, resiliente y está integrada por más de 300 especies.  Las especies clave permitirían que el río mantenga su rol como ecosistema de servicio. Proponemos para ríos de llanura la visión territorial, multiescala, dentro del concepto de riverine landscape, que incluye tanto la conservación composicional (Biodiversidad como funcional (Integridad Ecológica. 

History of geophysical studies at the Waste Isolation Pilot Plant (WIPP), southeastern New Mexico

International Nuclear Information System (INIS)

Borns, D.J.

1997-01-01

A variety of geophysical methods including the spectrum of seismic, electrical, electromagnetic and potential field techniques have used support characterization, monitoring and experimental studies at the Waste Isolation Pilot Plant (WIPP). The geophysical studies have provided significant understanding of the nature of site deformation, tectonics and stability. Geophysical methods have delineated possible brine reservoirs beneath the underground facility and have defined the disturbed rock zone that forms around underground excavations. The role of geophysics in the WIPP project has evolved with the project. The early uses were for site characterization to satisfy site selection criteria or factors. As the regulatory framework for WIPP grew since 1980, the geophysics program was focused on support of experimental and field programs such as Salado hydrogeology and underground room systems and excavations. In summary, the major types of issues that geophysical studies addressed for WIPP are: Issue 1: Site Characterization; Issue 2: Castile Brine Reservoirs; Issue 3: Rustler /Dewey Lake Hydrogeology; Issue 4: Salado Hydrogeology; and Issue 5: Excavation Effects. The nature of geophysics program for WIPP has been to support investigation rather than being the principal investigation itself. The geophysics program has been used to define conceptual models (e.g., the Disturbed Rock Zone-DRZ) or to test conceptual models (e.g., high transmissivity zones in the Rustler Formation). An effect of being a support program is that as new project priorities arose the funding for the geophysics program was limited and withdrawn. An outcome is that much of the geophysics survey information resides in contractor reports since final interpretation reports were not funded

Rescuing the Cahoon Mine drill cores: Opportunities for modern mapping of the ca. 1.7 Ga Freedom Formation in southern Wisconsin

Science.gov (United States)

Stanley, V.; Stewart, E.

2016-12-01

Rock cores collected during historic mineral exploration can provide invaluable data for modern analyses, but only if the samples are properly curated. The Cahoon Mine operated in Baraboo, WI during the 1910's and produced iron ore from the ca. 1.7 Ga Freedom Formation. The Freedom Formation is part of the well-known Baraboo-interval stratigraphy and is only present in the subsurface of Wisconsin (Weidman, 1904). Seventeen exploratory drill cores were rescued by Wisconsin Geological and Natural History Survey (WGNHS) from the original drying house at the mine site. The condition of the containers endangered the stratigraphic context of the collection; identifiers and depth markings were often obscured or lost. The individual core pieces were coated in residue and dust. Most of what is known about the Freedom Formation is from core logs and master's theses from the early 1900's (Leith, 1935; Schmidt, 1951). Ongoing subsurface mapping of the Baraboo-interval sediments and underlying basement of southern Wisconsin integrates new and existing subsurface and regional geophysical datasets. Mapping involves calibrating unique signals in regional aeromagnetic data to known lithology from drill core and cuttings. The Freedom Formation is especially important in this process as its iron-rich composition and regional continuity causes it to have a somewhat unique signal in regional aeromagnetic data. The Cahoon Mine cores in the WGNHS repository are the most extensive collection of physical samples from the Freedom Formation still in existence. We are in the process of curating the cores to facilitate their use in ongoing bedrock mapping. Today the cost and logistics of extensive sampling of this unit makes the existing core collection irreplaceable. We transferred the material to new containers, digitally recorded metadata, and created archival labels. As a result of this effort, the Cahoon Mine cores are now stored in a format that is physically and digitally accessible.

Structural and lithological conditioning of the large karst systems of the Sierra de los Organos, Pinar del Rio, Cuba; Condicionantes estructurales y litologicas de los grandes sistemas karsticos de la Sierra de los Organos, Pinar del Rio, Cuba

Energy Technology Data Exchange (ETDEWEB)

Diaz Guanche, C.; Ramirez Hernandez, R.; Farfan Gonzalez, H.; Estevez Cruz, E.; Ordaz Hernandez, A.; Aldana Vilas, C.

2016-07-01

he karst, a complex phenomenon, is governed by a number of variables which dictate its genesis and evolution. Among these variables tectonic settings and lithology play the main role. In Cuba, approximately 65% of the territory is occupied by karst. The Sierra de los Organos, part of Cordillera de Guaniguanico, has some of the largest karstic systems in the country. With the aim of demonstrating the relationship between the spatial and morphological development of the underground karstic systems and the geological structure and lithology of the area, several structural and morphological measurements and field observations have been made. These measurements and observations allowing us to conclude that the karstic processes take place mainly in massive, relatively homogeneous and very thick limestone in the Sierra de los Organos. Moreover, these rocks are characterized by both low porosity and a high degree of fracturing. These karstic forms are also conditioned by the existence of various fracturing systems with general NE-SW and NW-SE orientations. Interception of these fracturing systems provides, as expected, areas with the largest volumes of karstic cavities. (Author)

Lithofacies Architecturing and Hydrocarbon Reservoir Potential of Lumshiwal Formation: Surghar Range, Trans-Indus Ranges, North Pakistan

Directory of Open Access Journals (Sweden)

Iftikhar Alam

2015-12-01

Full Text Available Western environs of the Indo-Pak Plate are comprised of thick Mesozoic sedimentary sequence and extensively extended toward Trans-Indus Salt ranges of North Pakistan. This sequence consists of detrital clastic sediments in the lower level and shallow to deep marine sediments in the upper level. In the Trans-Indus Salt ranges the Lumshiwal Formation represents the transitional level of the lower Cretaceous sequence. In Surghar Range the lower part of formation is composed of cyclic alteration of clayey, silty, very fine grained greenish gray, glauconitic sandstone to rusty brownish gray sandstone. The middle part of formation is comprised of thick bedded to massive, cliff forming, sugary texture, whitish to light yellowish gray occasionally rusty brownish gray medium to coarse grained, moderate to well cemented sandstone. The upper part is comprised of feldspathic, ferruginous, weathering yellowish brown, rusty brown to light gray with locally calcareous sandstone beds. The sandstone is reddish to brownish gray, coarse to granules texture, moderately cemented thick bedded to massive. Total thickness of the formation is 220m at Baroch Nala section 230m in Karandi section at a dip of 60°. Along trend lithological variations and diversified primary sedimentary structures which classifies fifteen different sub-lithofacie in Lumshiwal. Middle and upper parts of the formation show massive to thick, current bedded deposits. Lithofacies analysis revealed that the Lumshiwal Formation was deposited in shallow marine for the lower cyclic part to transitionally prodeltaic to deltaic for the middle to upper part respectively. High silica contents in the upper part compare to the middle and lower part of the formation. On the basis of high silica and low alumina with other low fractions of rock fragments, the sandstone is categorized into quartzarenite, sub-litharenite and sub-arkose. Cross beds in the middle and upper parts of formation indicate west to east

Valley formation by groundwater seepage, pressurized groundwater outbursts and crater-lake overflow in flume experiments with implications for Mars

Science.gov (United States)

Marra, Wouter A.; Braat, Lisanne; Baar, Anne W.; Kleinhans, Maarten G.

2014-04-01

Remains of fluvial valleys on Mars reveal the former presence of water on the surface. However, the source of water and the hydrological setting is not always clear, especially in types of valleys that are rare on Earth and where we have limited knowledge of the processes involved. We investigated three hydrological scenarios for valley formation on Mars: hydrostatic groundwater seepage, release of pressurized groundwater and crater-lake overflow. Using physical modeling in laboratory experiments and numerical hydrological modeling we quantitatively studied the morphological development and processes involved in channel formation that result from these different sources of water in unconsolidated sediment. Our results show that valleys emerging from seeping groundwater by headward erosion form relatively slowly as fluvial transport takes place in a channel much smaller than the valley. Pressurized groundwater release forms a characteristic source area at the channel head by fluidization processes. This head consist of a pit in case of superlithostatic pressure and may feature small radial channels and collapse features. Valleys emerging from a crater-lake overflow event develop quickly in a run-away process of rim erosion and discharge increase. The valley head at the crater outflow point has a converging fan shape, and the rapid incision of the rim leaves terraces and collapse features. Morphological elements observed in the experiments can help in identifying the formative processes on Mars, when considerations of experimental scaling and lithological characteristics of the martian surface are taken into account. These morphological features might reveal the associated hydrological settings and formative timescales of a valley. An estimate of formative timescale from sediment transport is best based on the final channel dimensions for groundwater seepage valleys and on the valley dimensions for pressurized groundwater release and crater-lake overflow valleys. Our

Development of the Conceptual Models for Chemical Conditions and Hydrology Used in the 1996 Performance Assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

LARSON, KURT W.

2000-01-01

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) facility for the permanent disposal of defense-related transuranic (TRU) waste. US Environmental Protection Agency (EPA) regulations specify that the DOE must demonstrate on a sound basis that the WIPP disposal system will effectively contain long-lived alpha-emitting radionuclides within its boundaries for 10,000 years following closure. In 1996, the DOE submitted the ''40 CFR Part 191 Compliance Certification Application for the Waste Isolation Pilot Plant'' (CCA) to the EPA. The CCA proposed that the WIPP site complies with EPA's regulatory requirements. Contained within the CCA are descriptions of the scientific research conducted to characterize the properties of the WIPP site and the probabilistic performance assessment (PA) conducted to predict the containment properties of the WIPP disposal system. In May 1998, the EPA certified that the TRU waste disposal at the WIPP complies with its regulations. Waste disposal operations at WIPP commenced on March 28, 1999. The 1996 WIPP PA model of the disposal system included conceptual and mathematical representations of key hydrologic and geochemical processes. These key processes were identified over a 22-year period involving data collection, data interpretation, computer models, and sensitivity studies to evaluate the importance of uncertainty and of processes that were difficult to evaluate by other means. Key developments in the area of geochemistry were the evaluation of gas generation mechanisms in the repository; development of a model of chemical conditions in the repository and actinide concentrations in brine; selecting MgO backfill and demonstrating its effects experimentally; and determining the chemical retardation capability of the Culebra. Key developments in the area of hydrology were evacuating the potential for groundwater to dissolve the Salado Formation (the repository host formation), development of a regional model for

Development of the conceptual models for chemical conditions and hydrology used in the 1996 performance assessment for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Larson, K.W.

2000-01-01

The Waste Isolation Pilot Plant (WIPP) is a US Department of Energy (DOE) facility for the permanent disposal of defense-related transuranic (TRU) waste. US Environmental Protection Agency (EPA) regulations specify that the DOE must demonstrate on a sound basis that the WIPP disposal system will effectively contain long-lived alpha-emitting radionuclides within its boundaries for 10,000 years following closure. In 1996, the DOE submitted the 40 CFR Part 191 Compliance Certification Application for the Waste Isolation Pilot Plant (CCA) to the EPA. The CCA proposed that the WIPP site complies with EPA's regulatory requirements. Contained within the CCA are descriptions of the scientific research conducted to characterize the properties of the WIPP site and the probabilistic performance assessment (PA) conducted to predict the containment properties of the WIPP disposal system. In May 1998, the EPA certified that the TRU waste disposal at the WIPP complies with its regulations. Waste disposal operations at WIPP commenced on 28 March 1999. The 1996 WIPP PA model of the disposal system included conceptual and mathematical representations of key hydrologic and geochemical processes. These key processes were identified over a 22-year period involving data collection, data interpretation, computer models, and sensitivity studies to evaluate the importance of uncertainty and of processes that were difficult to evaluate by other means. Key developments in the area of geochemistry were the evaluation of gas generation mechanisms in the repository; development of a model of chemical conditions in the repository and actinide concentrations in brine; selecting MgO backfill and demonstrating its effects experimentally; and, determining the chemical retardation capability of the Culebra. Key developments in the area of hydrology were evaluating the potential for groundwater to dissolve the Salado Formation (the repository host formation); development of a regional model for

Recovery and Lithologic Analysis of Sediment from Hole UT-GOM2-1-H002, Green Canyon 955, Northern Gulf of Mexico

Science.gov (United States)

Kinash, N.; Cook, A.; Sawyer, D.; Heber, R.

2017-12-01

In May 2017 the University of Texas led a drilling and pressure coring expedition in the northern Gulf of Mexico, UT-GOM2-01. The holes were located in Green Canyon Block 955, where the Gulf of Mexico Joint Industry Project Leg II identified an approximately 100m thick hydrate-filled course-grained levee unit in 2009. Two separate wells were drilled into this unit: Holes H002 and H005. In Hole H002, a cutting shoe drill bit was used to collect the pressure cores, and only 1 of the 8 cores collected was pressurized during recovery. The core recovery in Hole H002 was generally poor, about 34%, while the only pressurized core had 45% recovery. In Hole H005, a face bit was used during pressure coring where 13 cores were collected and 9 cores remained pressurized. Core recovery in Hole H005 was much higher, at about 75%. The type of bit was not the only difference between the holes, however. Drilling mud was used throughout the drilling and pressure coring of Hole H002, while only seawater was used during the first 80m of pressure cores collected in Hole H005. Herein we focus on lithologic analysis of Hole H002 with the goal of documenting and understanding core recovery in Hole H002 to compare with Hole H005. X-ray Computed Tomography (XCT) images were collected by Geotek on pressurized cores, mostly from Hole H005, and at Ohio State on unpressurized cores, mostly from Hole H002. The XCT images of unpressurized cores show minimal sedimentary structures and layering, unlike the XCT images acquired on the pressurized, hydrate-bearing cores. Only small sections of the unpressurized cores remained intact. The unpressurized cores appear to have two prominent facies: 1) silt that did not retain original sedimentary fabric and often was loose within the core barrel, and 2) dense mud sections with some sedimentary structures and layering present. On the XCT images, drilling mud appears to be concentrated on the sides of cores, but also appears in layers and fractures within

Updated procedures for using drill cores and cuttings at the Lithologic Core Storage Library, Idaho National Laboratory, Idaho

Science.gov (United States)

Hodges, Mary K.V.; Davis, Linda C.; Bartholomay, Roy C.

2018-01-30

In 1990, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy Idaho Operations Office, established the Lithologic Core Storage Library at the Idaho National Laboratory (INL). The facility was established to consolidate, catalog, and permanently store nonradioactive drill cores and cuttings from subsurface investigations conducted at the INL, and to provide a location for researchers to examine, sample, and test these materials.The facility is open by appointment to researchers for examination, sampling, and testing of cores and cuttings. This report describes the facility and cores and cuttings stored at the facility. Descriptions of cores and cuttings include the corehole names, corehole locations, and depth intervals available.Most cores and cuttings stored at the facility were drilled at or near the INL, on the eastern Snake River Plain; however, two cores drilled on the western Snake River Plain are stored for comparative studies. Basalt, rhyolite, sedimentary interbeds, and surficial sediments compose most cores and cuttings, most of which are continuous from land surface to their total depth. The deepest continuously drilled core stored at the facility was drilled to 5,000 feet below land surface. This report describes procedures and researchers' responsibilities for access to the facility and for examination, sampling, and return of materials.

Thallium isotope variations in an ore-bearing continental igneous setting: Collahuasi Formation, northern Chile

Science.gov (United States)

Baker, R. G. A.; Rehkämper, M.; Ihlenfeld, C.; Oates, C. J.; Coggon, R.

2010-08-01

Thallium is a highly incompatible element and a large fraction of the bulk silicate Earth Tl budget is, therefore, expected to reside in the continental crust. Nonetheless, the Tl isotope systematics of continental rocks are essentially unexplored at present. Here, we present new Tl isotope composition and concentration data for a suite of 36 intrusive and extrusive igneous rocks from the vicinity of porphyry Cu deposits in the Collahuasi Formation of the Central Andes in northern Chile. The igneous lithologies of the rocks are variably affected by the hydrothermal alteration that accompanied the formation of the Cu deposits. The samples display Tl concentrations that vary by more than an order of magnitude, from 0.1 to 3.2 μg/g, whilst ɛ 205Tl ranges between -5.1 and +0.1 (ɛ 205Tl is the deviation of the 205Tl/ 203Tl isotope ratio of a sample from a standard in parts per 10 4). These variations are primarily thought to be a consequence of hydrothermal alteration processes, including metasomatic transport of Tl, and formation/breakdown of Tl-bearing minerals, which are associated with small but significant Tl isotope effects. The Tl abundances show excellent correlations with both K and Rb concentrations but no co-variation with Cu. This demonstrates that Tl displays only limited chalcophile affinity in the continental crust of the Collahuasi Formation, but behaves as a lithophile element with a distribution that is primarily governed by partitioning of Tl + into K +-bearing phases. Collahuasi samples with propylitic alteration features, which are derived from the marginal parts of the hydrothermal systems, have, on average, slightly lighter Tl isotope compositions than rocks from the more central sericitic and argillic alteration zones. This small but statistically significant difference most likely reflects preferential retention of isotopically heavy Tl in alteration phases, such as white micas and clays, which formed during sericitic and argillic alteration.

Nuclear energy and radioactive waste disposal in the age of recycling

International Nuclear Information System (INIS)

Conca, James L.; Apted, Michael

2007-01-01

The magnitude of humanity's energy needs requires that we embrace a multitude of various energy sources and applications. For a variety of reasons, nuclear energy must be a major portion of the distribution, at least one third. The often-cited strategic hurdle to this approach is nuclear waste disposal. Present strategies concerning disposal of nuclear waste need to be changed if the world is to achieve both a sustainable energy distribution by 2040 and solve the largest environmental issue of the 21. century - global warming. It is hoped that ambitious proposals to replace fossil fuel power generation by alternatives will drop the percentage of fossil fuel use substantially, but the absolute amount of fossil fuel produced electricity must be kept at or below its present 10 trillion kW-hrs/year. Unfortunately, the rapid growth in consumption to over 30 trillion kW-hrs/year by 2040, means that 20 trillion kW-hrs/yr of non-fossil fuel generated power has to come from other sources. If half of that comes from alternative non-nuclear, non-hydroelectric sources (an increase of 3000%), then nuclear still needs to increase by a factor of four worldwide to compensate. Many of the reasons nuclear energy did not expand after 1970 in North America (proliferation, capital costs, operational risks, waste disposal, and public fear) are no longer a problem. The WIPP site in New Mexico, an example of a solution to the nuclear waste disposal issue, and also to public fear, is an operating deep geologic nuclear waste repository in the massive bedded salt of the Salado Formation. WIPP has been operating for eight years, and as of this writing, has disposed of over 50,000 m 3 of transuranic waste (>100 nCi/g but <23 Curie/liter) including high activity waste. The Salado Formation is an ideal host for any type of nuclear waste, especially waste from recycled spent fuel. (authors)

Geology of hole drill thermal infra basaltic (Guarani Aquifer System) in Salto Uruguay

International Nuclear Information System (INIS)

Goso, C.; Muzio, R.; Marmisolle, J.; De Souza, S.

2004-01-01

This paper deals with the lithological description of a thermal infrabasaltic (Guarani Aquifer System) hole drill cutting in Dayman (Kanarek Hotel), Salto department (Uruguay). This hole drill shows 152 meters of Buena Vista Formation (Upper Permian- Lower Triassic), 188 meters of Tacuarembo Formation (Upper Jurassic-Lower Cretaceous) and 940meters of Arapey Formation (Lower Cretaceous). Petrographical studies of six basaltic levels were done [es

Murgabskaya Oblast, a promising gas region of Central Asia

Energy Technology Data Exchange (ETDEWEB)

Amanniyazov, K.N.; Abdyyev, A.A.

1981-01-01

Gas fields of the Murgabskiy region are multiple-bed. The industrial gas content is associated with the sandy-terrigenous formations of the Shatlyk productive level of the lower Goterivskiy stage. The gas formation is anticlinal, occasionally floating. A map is compiled for the dispersal of the Shatlyk level which isolates the lithological composition, thickness, zones of dispersal of sandstone, etc. A description is provided for the map plan of the Shatlyk level. Alternation of sandy-argillaceous and carbonate rocks created favorable prerequisites for the development in the deposits of the Neocomian of lithological-physical pairs of ''collectors-mantles'', the basis for trap formation in structures and zones of lithological substitution. Within the Murgabskiy region, the greatest outlook for discovering new gas fields is confined to the Shatlyk level. It is associated with the central part of the Murgabskiy Basin where major deposits have already been discovered. A group of structures in the eastern submersion of the Kopetdag trough at the junction of the Murgabskiy Basin is important. The structures at the junction of East Kopetdag and the Murgabskiy Basin may be promising. The outlook for possible gas is associated with deposits of the lower cretaceous and Sharaplinksiy level. The main task must be comprehensive in investigation of the suprasaline apt-Neocomian and Kimmeridgian-Tithonian deposits as possible multiple-bed gas and oil containing masses.

Great earthquakes along the Western United States continental margin: implications for hazards, stratigraphy and turbidite lithology

Directory of Open Access Journals (Sweden)

C. H. Nelson

2012-11-01

Full Text Available We summarize the importance of great earthquakes (M_w ≳ 8 for hazards, stratigraphy of basin floors, and turbidite lithology along the active tectonic continental margins of the Cascadia subduction zone and the northern San Andreas Transform Fault by utilizing studies of swath bathymetry visual core descriptions, grain size analysis, X-ray radiographs and physical properties. Recurrence times of Holocene turbidites as proxies for earthquakes on the Cascadia and northern California margins are analyzed using two methods: (1 radiometric dating (¹⁴C method, and (2 relative dating, using hemipelagic sediment thickness and sedimentation rates (H method. The H method provides (1 the best estimate of minimum recurrence times, which are the most important for seismic hazards risk analysis, and (2 the most complete dataset of recurrence times, which shows a normal distribution pattern for paleoseismic turbidite frequencies. We observe that, on these tectonically active continental margins, during the sea-level highstand of Holocene time, triggering of turbidity currents is controlled dominantly by earthquakes, and paleoseismic turbidites have an average recurrence time of ~550 yr in northern Cascadia Basin and ~200 yr along northern California margin. The minimum recurrence times for great earthquakes are approximately 300 yr for the Cascadia subduction zone and 130 yr for the northern San Andreas Fault, which indicates both fault systems are in (Cascadia or very close (San Andreas to the early window for another great earthquake.

On active tectonic margins with great earthquakes, the volumes of mass transport deposits (MTDs are limited on basin floors along the margins. The maximum run-out distances of MTD sheets across abyssal-basin floors along active margins are an order of magnitude less (~100 km than on passive margins (~1000 km. The great earthquakes along the Cascadia and northern California margins

Lithology, hydro-dynamism and thermicity in the multi-layer sedimentary system intersected by the Andra deep borehole of Montiers-sur-Saulx (Meuse, France)

International Nuclear Information System (INIS)

Landrein, Philippe; Vigneron, Georges; Delay, Jacques; Lebon, Patrick; Pagel, Maurice

2013-01-01

their own sampling on cores dedicated to the Andra studies as well as on cores that were positioned to suit their own research themes. The Callovo-Oxfordian and the upper part of the Dogger were cored continuously from 526 m to 770 m in depth. The method used for the lower part, from 770 to 2001 m (MD),was percussion air drilling with punctual core extraction for certain horizons. Numerous logs were carried out during drilling, others were differed, and two thermal logs were performed 9 months after drilling: These logs and the cores helped to establish a stratigraphic log consistent with previous Andra drilling results in the Dogger and the Malm, as well as the Chevillon 1 drilling for the Liassic and Triassic units. Information obtained from the deep borehole confirmed the progressive northeasterly thickening of the Callovo-Oxfordian layer as well as its lithological vertical and horizontal consistency. The measurements of hydraulic transmissivity in Callovo-Oxfordian formation show the same range than in other places in the Transposition zone. In the Dogger, a clear link between the permeability of certain levels and the depositional environments was brought to light. For the deep formations (Lias and Trias), the series is consistent with the one deduced from previous drillings. Only the formation of the lower Keuper 'Marnes irisees' is thicker than expected. The reconstruction of the thickness of the formations, achieved thanks to the seismic campaign and nearest oil drillings, shows that the EST433 borehole is located in a hollow area where the Keuper formations are thicker. The borehole results show that the upper and middle Lias and Trias facies have a very low porosity and that only the lower Trias contains aquiferous levels. Thus, a series of a thousand meters with no significant porosity separates the Dogger aquifer from that of the lower Trias. Interpretation of the seismic profiles reveals the existence of faults, mainly in the western part of the zone, but

The effect of barite mud on the division of the detector energy window in density logging while drilling

International Nuclear Information System (INIS)

Zhang Li; Sun Jianmeng; Yu Huawei; Jiang Dong; Zhang Jing

2012-01-01

In the litho-density logging, formation density and lithology were acquired by calculating the total counts in certain energy window. Therefore, the division of the energy window directly affects the evaluation of density and lithology value. In the process of the energy window division, mud type affects the determination of the range of energy window. In this work, Monte Carlo simulation method was applied to study the range of energy window regarding to water mud and barite mud, respectively. The results show that the range of the energy window with barite mud is less than that of the water mud, and lithology identification will have greater' error in the barite mud. It is important to analyze influencing factors and improve the measurement accuracy of the litho-density logging. (authors)

Geologic-seismic models, prediction of shallow-water lacustrine delta sandbody and hydrocarbon potential in the Late Miocene, Huanghekou Sag, Bohai Bay Basin, northern China

Directory of Open Access Journals (Sweden)

Hao Liu

2018-01-01

Full Text Available The Huanghekou Sag is located at the southeast part of the Bohai Bay Basin, northern China. Large-scale shallow lake delta developed in the Neogene provided suitable geological conditions for the formation of a subtle oil-gas reservoir in this area. The key for analyzing sandstone reservoir and sedimentary facies is by using seismic attributes (amplitude to establish the relationship between lithology combination and seismic attributes. The lower unit of Late Miocene Minghuazhen Formation at the BZ34 block in the Huanghekou Sag was subdivided into 10 parasequence sets (PSS. Thicker sandstones mainly occurred in PSS1 and PSS10, whereas thin sandstones are mostly observed within other parasequence sets. This study presents statistics and analyses of lithology, i.e., statistics of root-mean-square (RMS amplitude and lithology of well locations in different parasequence sets of the study area, as well as 1-D forward seismic models of 7 types of lithology combinations, the establishment of a spatial distribution of 2-D sandbody, forward seismic models etc. Our study indicates that high amplitude peaks correspond to thicker sandbodies, while low amplitude indicates non-development of sandbodies (generally less than 2 m, and medium amplitude agrees well with large sets of mudstones interbedded with medium and thinner sandstones. Different sand–mudstone combinations genetically reflect a combination of multiple micro-facies, therefore, amplitude features can predict sandbodies as well as facies characteristics.

Gully formation in terrestrial simple craters: Meteor Crater, USA and Lonar Crater, India

Science.gov (United States)

Kumar, P.; Head, J. W.; Kring, D. A.

2007-12-01

Geomorphic features such as gullies, valley networks, and channels on Mars have been used as a proxy to understand the climate and landscape evolution of Mars. Terrestrial analogues provide significant insight as to how the various exogenic and endogenic processes might contribute to the evolution of these martian landscapes. We describe here a terrestrial example from Meteor Crater, which shows a spectacular development of gullies throughout the inner wall in response to rainwater precipitation, snow melting and groundwater discharge. As liquid water has been envisaged as one of the important agents of landscape sculpturing, Meteor Crater remains a useful landmark, where planetary geologists can learn some lessons. We also show here how the lithology and structural framework of this crater controls the gully distribution. Like many martian impact craters, it was emplaced in layered sedimentary rocks with an exceptionally well-developed centripetal drainage pattern consisting of individual alcoves, channels and fans. Some of the gullies originate from the rim crest and others from the middle crater wall, where a lithologic transition occurs. Deeply incised alcoves are well-developed on the soft sandstones of the Coconino Formation exposed on the middle crater wall, beneath overlying dolomite. In general, the gully locations are along crater wall radial fractures and faults, which are favorable locales of groundwater flow and discharge; these structural discontinuities are also the locales where the surface runoff from rain precipitation and snow melting can preferentially flow, causing degradation. Like martian craters, channels are well developed on the talus deposits and alluvial fans on the periphery of the crater floor. In addition, lake sediments on the crater floor provide significant evidence of a past pluvial climate, when groundwater seeped from springs on the crater wall. Caves exposed on the lower crater level may point to percolation of surface runoff

The effect of stratigraphic dip on brine inflow and gas migration at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Webb, S.W.; Larson, K.W.

1996-02-01

The natural dip of the Salado Formation at the Waste Isolation Pilot Plant (WIPP), although regionally only about 111, has the potential to affect brine inflow and gas-migration distances due to buoyancy forces. Current models, including those in WIPP Performance Assessment calculations, assume a perfectly horizontal repository and stratigraphy. With the addition of buoyancy forces due to the dip, brine and gas flow patterns can be affected. Brine inflow may increase due to countercurrent flow, and gas may preferentially migrate up dip. This scoping study has used analytical and numerical modeling to evaluate the impact of the dip on brine inflow and gas-migration distances at the WIPP in one, two, and three dimensions. Sensitivities to interbed permeabilities, two-phase curves, gas-generation rates, and interbed fracturing were studied

The effect of stratigraphic dip on brine inflow and gas migration at the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Webb, S.W. [Sandia National Labs., Albuquerque, NM (United States); Larson, K.W. [INTERA, Inc., Albuquerque, NM (United States)

1996-02-01

The natural dip of the Salado Formation at the Waste Isolation Pilot Plant (WIPP), although regionally only about 111, has the potential to affect brine inflow and gas-migration distances due to buoyancy forces. Current models, including those in WIPP Performance Assessment calculations, assume a perfectly horizontal repository and stratigraphy. With the addition of buoyancy forces due to the dip, brine and gas flow patterns can be affected. Brine inflow may increase due to countercurrent flow, and gas may preferentially migrate up dip. This scoping study has used analytical and numerical modeling to evaluate the impact of the dip on brine inflow and gas-migration distances at the WIPP in one, two, and three dimensions. Sensitivities to interbed permeabilities, two-phase curves, gas-generation rates, and interbed fracturing were studied.

Model for transient creep of southeastern New Mexico rock salt

International Nuclear Information System (INIS)

Herrmann, W.; Wawersik, W.R.; Lauson, H.S.

1980-11-01

In a previous analysis, existing experimental data pertaining to creep tests on rock salt from the Salado formation of S.E. New Mexico were fitted to an exponential transient creep law. While very early time portions of creep strain histories were not fitted very well for tests at low temperatures and stresses, initial creep rates in particular generally being underestimated, the exponential creep law has the property that the transient creep strain approaches a finite limit with time, and is therefore desirable from a creep modelling point of view. In this report, an analysis of transient creep is made. It is found that exponential transient creep can be related to steady-state creep through a universal creep curve. The resultant description is convenient for creep analyses where very early time behavior is not important

Physico-chemical assessment of borehole water used by schools in ...

African Journals Online (AJOL)

samie.amidou

2013-07-24

Jul 24, 2013 ... soil pore spaces and in fractures of lithologic formation. Groundwater quality ... of geological material through which groundwater moves and the quality of ... compounds such as magnesium, calcium and chlorides. However ...

Basic data report for drillhole WIPP 19 (Waste Isolation Pilot Plant-WIPP)

International Nuclear Information System (INIS)

1980-03-01

WIPP 19 is an exploratory borehole whose objective was to determine the nature of the near-surface formations after seismic information indicated a possible fault. The borehole is located in section 20, T.22S., R.31E., in eastern Eddy County, New Mexico, and was drilled between April 6 and May 4, 1978. The hole was drilled to a depth of 1038.2 feet and encountered, from top to bottom, surficial Holocene deposits (7', including artificial fill for drill pad), the Mescalero caliche (7'), the Santa Rosa Sandstone (82'), the Dewey Lake Red Beds (494'), the Rustler Formation (315'), and the upper portion of the Salado Formation (143'). Cuttings were collected at 10-foot intervals. A suite of geophysical logs was run to measure acoustic velocities, density, and radioactivity. On the basis of comparison with other geologic sections drilled in the area, the WIPP 19 section is a normal stratigraphic sequence and it does not show structural disruption. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes. The WIPP will also provide facilities to research interactions between high-level waste and salt

Basic data report for drillhole WIPP 21 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1980-03-01

WIPP 21 is an exploratory borehole whose objective is to determine the nature of the near-surface formations after seismic information indicated a possible fault. The borehole is located in section 20, T.22S., R.31E., in eastern Eddy County, New Mexico, and was drilled between May 24 and 26, 1978. The hole was drilled to a depth of 1046 feet and encountered, from top to bottom, surficial Holocene deposits (6', including artificial fill for drill pad), the Mescalero caliche (6'), the Santa Rosa Sandstone (34'), the Dewey Lake Red Beds (487'), the Rustler Formation (308'), and the upper portion of the Salado Formation (178'). Cuttings were collected at 10-foot intervals. A suite of goephysical logs was run to measure acoustic velocities, density, and radioactivity. On the basis of comparison with other geologic sections drilled in the area, the WIPP 21 section is a normal stratigraphic sequence and it does not show structural disruption. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes. The WIPP will also provide facilities to research interactions between high-level waste and salt

Basic data report for drillhole WIPP 18 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1980-03-01

WIPP 18 is an exploratory borehole whose objective is to determine the nature of the near-surface formations after seismic information indicated a possible fault. The borehole is located in section 20, T.22S., R.31E., in eastern Eddy County, New Mexico, and was drilled between March 14 and 30, 1978. The hole was drilled to a depth of 1060 feet and encountered, from top to bottom, surficial Holocene deposits (5', including artificial fill for drill pad), the Mescalero caliche (4'), the Santa Rosa Sandstone (129'), the Dewey Lake Red Beds (475'), the Rustler Formation (315'), and the upper portion of the Salado Formation (132'). Cuttings were collected at 10-foot intervals. A suite of geophysical logs was run to measure acoustic velocities, density, and radioactivity. On the basis of comparison with other geologic sections drilled in the area, the WIPP 18 section is a normal stratigraphic sequence and it does not show structural disruption. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes. The WIPP will also provide facilities to research interactions between high-level waste and salt

Basic data report for Drillhole WIPP 22 (Waste Isolation Pilot Plant, WIPP)

International Nuclear Information System (INIS)

1980-03-01

WIPP 22 is an exploratory borehole whose objective is to determine the nature of the near-surface formations after seismic information indicated a possible fault. The borehole is located in section 20, T.22S., R.31E., in eastern Eddy County, New Mexico, and was drilled between March 14 and 30, 1978. The hole was drilled to a depth of 1448 feet and encountered, from top to bottom, surficial Holocene deposits (6', including artificial fill for drill pad), the Mescalero caliche (7'), the Santa Rosa Sandstone (68'), the Dewey Lake Red Beds (492'), the Rustler Formation (311'), and the upper portion of the Salado Formation (565'). Cuttings were collected at 10-foot intervals. A suite of geophysical logs was run to measure acoustic velocities, density, and radioactivity. On the basis of comparison with other geologic sections drilled in the area, the WIPP 22 section is a normal stratigraphic sequence and it does not show structural disruption. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic defense wastes. The WIPP will also provide facilities to research interactions between high-level waste and salt

Evolution of hydrologic systems and brine geochemistry in a deforming salt medium: Data from WIPP brine seeps

International Nuclear Information System (INIS)

Deal, D.E.; Roggenthen, W.M.

1991-01-01

The Brine Sampling and Evaluation Program (BSEP) is a formalized continuation of studies that began in 1982 as part of the Site Validation Program. The program was established in 1985. The mission was to document and investigate the origins, hydraulic characteristics, extent, and composition of brine occurrences in the Permian Salado Formation and the seepage of that brine into the WIPP excavations. This document focuses on the cumulative data obtained from the BSEP. The overall activities of the BSEP described and quantified the brine. It includes documentation and study of brine inflow into boreholes in the facility. The BSEP investigated the occurrence and development of brine weeps, crusts, and brine geochemistry. The presence of salt-tolerant bacteria in the workings was recorded and their possible interactions with experiments and operations, was assessed. The formation properties associated with the occurrence of brine was characterized. The determination of formation properties included the water content of various geologic units, direct examination of these units in boreholes using a video camera system, and measurement of electrical properties relatable to the brine contents. Modeling examined the interaction of salt deformation near the workings and the flow of brine through the deforming rocks. 34 refs

Sub-surface lithology, distribution of uranium and other trace elements and sulphur isotope studies of Bhuj formation in the Bharasar area, Kachchh district, Gujarat, India

International Nuclear Information System (INIS)

Thangavel, S.; Maithani, P.B.; Banerjee, Rahul

1998-01-01

Lower Cretaceous Bhuj Formation as recorded in the drilled core in the Bharasar area, Kachchh district, Gujarat comprises marginal marine to fluvio-deltaic sediments of sandstone, siltstone, clay and carbonaceous shales with pyrite and coalified matter. Drill-core samples of sandstone chemically analysed 3 O 8 whereas basic rock/dolerite up to 16 ppm eU 3 O 8 indicating contamination of overlying sediments. 34 S values of euhedral pyrite from the sandstone with admixed patches of mud stone and siltstone have a wide range of +0.71 per mil to +43.20 per mil with an average of 16.04 per mil, which indicate a sedimentary source for sulphur, probably either marine sulphate, sea water or geosynclinal sediments

DOE capabilities for in-situ characterization and monitoring of formation properties in the vadose zone

International Nuclear Information System (INIS)

Hearst, J.R.; Brodeur, J.R.; Koizumi, C.J.; Conaway, J.G.; Mikesell, J.L.; Nelson, P.H.; Stromswold, D.C.; Wilson, R.D.

1993-09-01

The DOE Environmental Restoration (ER) Program faces the difficult task of characterizing the properties of the subsurface and identifying and mapping a large number of contaminants at landfills, surface disposal areas, spill sites, nuclear waste tanks, and subsurface contaminant plumes throughout the complex of DOE facilities. Geophysical borehole logs can measure formation properties such as bulk density, water content, and lithology, and can quantitatively analyze for radionuclides and such elements as chlorine and heavy metals. Since these measurements can be replaced as desired, they can be used for both initial characterization and monitoring of changes in contaminant concentration and water content (sometimes linked to contaminant migration), at a fraction of the cost of conventional sampling. The techniques develop at several DOE laboratories, and the experience that the authors have gained in making in-situ measurements in the vadose zone, are applicable to problems at many other DOE sites. Moreover, they can capitalize on existing inventories of boreholes. By building on this experience workers involved in ER projects at those sites should be able to obtain high-quality data at substantial reductions in cost and time

Depositional features of the Middle Jurassic formation of Field N and their influence on optimal drilling schedule

International Nuclear Information System (INIS)

Mishina, D; Rukavishnikov, V; Belozerov, B; Bochkov, A

2015-01-01

The Middle Jurassic formation of Field N represented by 4 hydrodynamically connected layers (J5-6, J4, J3 and J2) contains 42% of the field STOIIP. The J2-6 formation is characterized as a gas-oil-condensate massive lithologically and tectonically screened accumulation with a gas cap (J2, J3 layers) and bottom water (J5-6 layer). Oil is predominantly in the J3 and J4 layers. There is a high risk of early gas coning from gas-bearing layers to oil producing wells determined on the basis of production test results, which can significantly decrease the life of the well. To select a more optimal drilling schedule, it is necessary to take the risk of early gas coning into account and determine distinctive features within the gas- saturated zone that can reduce it. The presence of a thick shale barrier between the J2 and J3 layers with thicknesses varying from 0 to 30 m is recognized as the beginning of a transgression cycle, and if the gas cap is only in the J2 layer, this barrier with the thickness of more than 5 m can extensively prevent early gas coning into oil producing wells. The integration of geological information represented by the probability map constructed and petrophysical information represented by the kh map provide the more precise determination of an optimal drilling schedule

Geological map of Uruguay Esc 1,100,000. Guayabos Sheet N-15

International Nuclear Information System (INIS)

Gancio, F.; Ford, I.

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Guayabos) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils of Arapey, Guichon, Mercedes and Asencio formations in the Cretaceous period

Porosity Development in a Coastal Setting: A Reactive Transport Model to Assess the Influence of Heterogeneity of Hydrological, Geochemical and Lithological Conditions

Science.gov (United States)

Maqueda, A.; Renard, P.; Cornaton, F. J.

2014-12-01

Coastal karst networks are formed by mineral dissolution, mainly calcite, in the freshwater-saltwater mixing zone. The problem has been approached first by studying the kinetics of calcite dissolution and then coupling ion-pairing software with flow and mass transport models. Porosity development models require high computational power. A workaround to reduce computational complexity is to assume the calcite dissolution reaction is relatively fast, thus equilibrium chemistry can be used to model it (Sanford & Konikow, 1989). Later developments allowed the full coupling of kinetics and transport in a model. However kinetics effects of calcite dissolution were found negligible under the single set of assumed hydrological and geochemical boundary conditions. A model is implemented with the coupling of FeFlow software as the flow & transport module and PHREEQC4FEFLOW (Wissmeier, 2013) ion-pairing module. The model is used to assess the influence of heterogeneities in hydrological, geochemical and lithological boundary conditions on porosity evolution. The hydrologic conditions present in the karst aquifer of Quintana Roo coast in Mexico are used as a guide for generating inputs for simulations.

Basic data report for drillhole WIPP 13 (Waste isolation pilot plant - WIPP)

International Nuclear Information System (INIS)

1979-10-01

The borehole WIPP-13 was drilled in the SW 1/4 section 17, T22S, R31E of eastern Eddy County during July and August, 1978, to investigate the nature of a resistivity anomaly. The stratigraphic section was normal, consisting of 13 feet of Quaternary deposits (including artificial fill for drill pad), 53 feet of the Triassic Santa Rosa Sandstone, 451 feet of Dewey Lake Red Beds, 269 feet of the Rustler Formation and 179 feet of the upper member of the Salado Formation. Consecutive cores were taken from 570 to 595, 656 to 729, and 827 to 878 feet. Cuttings were collected at 10-foot intervals throughout the rest of the hole. Geophysical logs were run to aid in interpretation of the stratigraphy. The WIPP is to demonstrate (through limited operations) disposal technology for transuranic (TRU) defense wastes. Eventual conversion of the facility to a repository for TRU defense wastes is anticipated. The WIPP will also provide research facilities for interactions between high-level waste and salt

Isolation of a 250 million-year-old halotolerant bacterium from a primary salt crystal

Science.gov (United States)

Vreeland, Russell H.; Rosenzweig, William D.; Powers, Dennis W.

2000-10-01

Bacteria have been found associated with a variety of ancient samples, however few studies are generally accepted due to questions about sample quality and contamination. When Cano and Borucki isolated a strain of Bacillus sphaericus from an extinct bee trapped in 25-30 million-year-old amber, careful sample selection and stringent sterilization techniques were the keys to acceptance. Here we report the isolation and growth of a previously unrecognized spore-forming bacterium (Bacillus species, designated 2-9-3) from a brine inclusion within a 250million-year-old salt crystal from the Permian Salado Formation. Complete gene sequences of the 16S ribosomal DNA show that the organism is part of the lineage of Bacillus marismortui and Virgibacillus pantothenticus. Delicate crystal structures and sedimentary features indicate the salt has not recrystallized since formation. Samples were rejected if brine inclusions showed physical signs of possible contamination. Surfaces of salt crystal samples were sterilized with strong alkali and acid before extracting brines from inclusions. Sterilization procedures reduce the probability of contamination to less than 1 in 10 9.

Basic data report for Drillhole WIPP 14 (Waste Isolation Pilot Plant - WIPP)

International Nuclear Information System (INIS)

1982-08-01

Borehole WIPP 14 is an exploratory well drilled in eastern Eddy County, New Mexico, in section 9, T22S,R31E. The borehole was drilled to a depth of 1000.0 ft measured from ground level. It penetrated, from top to bottom, 15.4 ft of Quaternary sands, 125.6 ft of the Triassic Santa Rosa Sandstone, and in the Permian strata, 497.7 ft of the Dewey Lake Red Beds, 312.9 ft of the Rustler Formation and 48.4 ft of the Upper Salado Formation. Seven hundred feet of the well were cored, at consecutive and nonconsecutive 10-ft intervals to a depth of 925.5 ft. Cuttings were collected where core was not taken. Density, gamma ray neutron and caliper logs were run the full depth of the hole. The WIPP is a demonstration facility for the disposal of transuranic (TRU) waste from defense programs. The WIPP will also provide a research facility to investigate the interactions between bedded salt and high level wastes

Riesgo de anegamiento: estimaciones para la Cuenca Baja del Río Salado Flooding risk in the Salado River Basin

OpenAIRE

Pablo Mauricio Vázquez; Fabián Néstor Cabria; María Del Carmen Rojas; Mirta Beatriz Calandroni

2009-01-01

Está documentado que de 1986 al 2001 se incrementó en un 69% el área cultivada en sectores de la Pampa Deprimida, y que el avance agrícola se realizó sobre tierras que cíclicamente fueron afectadas por excesos de agua (anegamiento o inundación). Con el propósito de auxiliar la planificación y el ordenamiento de actividades agropecuarias en tierras de la Pampa Deprimida, nos propusimos generar información que denote el riesgo de anegamiento o inundación. Para alcanzar este objetivo se calculó ...

Geological map of Uruguay Esc 1,100,000. Bizcocho Sheet N-0-21

International Nuclear Information System (INIS)

Ford, I; Gancio, F

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Bizcocho) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics of the lower Proterozoic in the socket of the La Plata river, Upper Cretaceous in Mercedes and Asencio formations, lower Tertiary in Palmitas and Fray Bentos formations and soils characteristics of the Quaternary period

Site study plan for intermediate hydrology clusters tests wells Deaf Smith County Site, Texas

International Nuclear Information System (INIS)

1988-01-01

To characterize the geologic, geochemical, and hydrologic characteristics of intermediate-depth formations at the proposed Deaf Smith County, Texas, repository site, wells called Intermediate Hydrology clusters will test the Dewey Lake, Alibates, Salado, Yates, Upper and Lower Seven Rivers, and Queen Grayburg Formations. Sixteen wells will be installed at six locations. One location will have four wills, two locations will have three wells, and three locations will have two wells for a total of 16 wells. Testing of the formations is to proceed from the bottom up, with 2-day pumping tests at the less permeable formations. Tracer tests and tests for verticall hydraulic properties will be designed and performed after other hydrologic tests are completed. After testing, selected wells are to be completed as single or possibly dual monitoring wells to observe water-level trends. To develop a hydrogeologic testing plan, the response of each formation to potential testing procedures was evaluated using design values and an assumend range for hydraulic parameters. These evaluations indicate that hydraulic properties of a sandy zone of the Dockum, the lower Sever Rivers, and possibly the Alibates and Queen/Grayburg can be determined by pumping tests. Standard of shut-in slug tests must be conducted in the remaining formations. Tests of very long duration would be required to determine the verticla properties of less permeable formations. Tracer tests would also require weeks or months. 61 figs., 34 refs., 4 tabs

Ca isotopes in the Ebro River Basin: mixing and lithological tracer

Science.gov (United States)

Guerrot, C.; Negrel, P. J.; Millot, R.; Petelet-Giraud, E.; Brenot, A.

2012-12-01

A large investigation of the Ebro River catchment was done in the past years regarding hydrogen, oxygen, lithium, boron, sulphur and oxygen from SO4 and strontium isotope measurements together with major and trace elements in the dissolved load of 25 river samples collected within the Ebro River Basin in Spain (Millot et al., Geophysical Research Abstracts, Vol. 14, EGU2012-2062, 2012). The Ebro River (928 km long, 85,530 km2 drainage basin) located in North-Eastern Spain rises near the Atlantic coast in the Cantabrian Mountains and flows into the western Mediterranean Sea through several large cities and agricultural, mining and industrial areas. The river is one of the largest contributors of freshwater in the Mediterranean Sea and ends in the Ebro delta, one of the most important wetlands in Europe. Bedrocks of the Ebro River Basin are mainly dominated by carbonates and evaporites from the Paleozoic and Mesozoic terrains. The Ebro river mainstream was sampled at Amposta one time per month between June 2005 and May 2006 and secondly, the Ebro River along its main course and its main tributaries were sampled during one field campaign in April 2006. The behaviour of Ca and its isotopes during water/rock interactions at the scale of a large river basin having various lithologies will be investigated in addition with Sr, S (SO4) and O (SO4) isotopes. One objective is to characterize the processes controlling the isotope signatures of a large river draining predominantly sedimentary bedrocks. The δ44Ca ratio (δ44/40 normalised to Seawater) ranged between -0.87 and -1.09‰ along the Ebro main stream, increasing towards the delta as the Ca content increase. In Amposta, the δ44Ca ratio ranged between -0.66 and -1.04‰ and tends to decrease with the increasing discharge. These variations are very similar to those given by the 87Sr/86Sr ratios and Sr contents. For the tributaries, the δ44Ca ratio ranged between -0.43 and -1.04‰ whereas the anhydrite-gypsum bedrock

Geological map of Uruguay Esc 1,100,000. Cololo Sheet 0-19

International Nuclear Information System (INIS)

Morales, H.; Ford, I.; Montana, J.

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Cololo) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils of Holocene, Oligocene and upper Cretaceous in Asencio and Fray Bentos formations

Formation of shatter cones by symmetric fracture bifurcation: Phenomenological modeling and validation

Science.gov (United States)

Kenkmann, Thomas; Hergarten, Stefan; Kuhn, Thomas; Wilk, Jakob

2016-08-01

Several models of shatter cone formation require a heterogeneity at the cone apex of high impedance mismatch to the surrounding bulk rock. This heterogeneity is the source of spherically expanding waves that interact with the planar shock front or the following release wave. While these models are capable of explaining the overall conical shape of shatter cones, they are not capable of explaining the subcone structure and the diverging and branching striations that characterize the surface of shatter cones and lead to the so-called horse-tailing effect. Here, we use the hierarchical arrangement of subcone ridges of shatter cone surfaces as key for understanding their formation. Tracing a single subcone ridge from its apex downward reveals that each ridge branches after some distance into two symmetrically equivalent subcone ridges. This pattern is repeated to form new branches. We propose that subcone ridges represent convex-curved fracture surfaces and their intersection corresponds to the bifurcation axis. The characteristic diverging striations are interpreted as the intersection lineations delimiting each subcone. Multiple symmetric crack branching is the result of rapid fracture propagation that may approach the Raleigh wave speed. We present a phenomenological model that fully constructs the shatter cone geometry to any order. The overall cone geometry including apex angle of the enveloping cone and the degree of concavity (horse-tailing) is largely governed by the convexity of the subcone ridges. Straight cones of various apical angles, constant slope, and constant bifurcation angles form if the subcone convexity is low (30°). Increasing subcone convexity leads to a stronger horse-tailing effect and the bifurcation angles increase with increasing distance from the enveloping cone apex. The model predicts possible triples of enveloping cone angle, bifurcation angle, and subcone angle. Measurements of these quantities on four shatter cones from different

Geologic report of the Maquoketa Shale, New Albany Shale, and Borden Group rocks in the Illinois Basin as potential solid waste repository sites

International Nuclear Information System (INIS)

Droste, J.B.; Vitaliano, C.J.

1976-06-01

We have evaluated the Illinois Basin in order to select a ''target site'' for a possible solid nuclear waste repository. In the process we have been mindful of geology (particularly stratigraphy and lithology and structure), terrane, population density, land use, land ownership and accessibility. After taking these restrictions into account, we have singled out a strip of land in south central Indiana in which we have selected four potential sites worthy of further exploration. In three of the sites the geology, lithology, and depth below the surface are more than adequate for crypt purposes in two separate formations--the Maquoketa Shale of the Ordovician System and the New Albany Shale-Borden Group of the Upper Devonian-Mississippian Systems. The interval between the two is several hundred feet. The geology and associated features in the fourth site are undoubtedly similar to those in the first three. In all four selections a sizeable proportion of the land is in public ownership and the population density in the nonpublicly owned land is low. The geology, lithology, and position of the target formations have been projected into the sites in question from data provided by drill core records of the Indiana Geological Survey. Precise details would, of course, require exploratory drilling on the selected site

SUBTASK 1.7 EVALUATION OF KEY FACTORS AFFECTING SUCCESSFUL OIL PRODUCTION IN THE BAKKEN FORMATION, NORTH DAKOTA PHASE II

Energy Technology Data Exchange (ETDEWEB)

Darren D. Schmidt; Steven A. Smith; James A. Sorensen; Damion J. Knudsen; John A. Harju; Edward N. Steadman

2011-10-31

Production from the Bakken and Three Forks Formations continues to trend upward as forecasts predict significant production of oil from unconventional resources nationwide. As the U.S. Geological Survey reevaluates the 3.65 billion bbl technically recoverable estimate of 2008, technological advancements continue to unlock greater unconventional oil resources, and new discoveries continue within North Dakota. It is expected that the play will continue to expand to the southwest, newly develop in the northeastern and northwestern corners of the basin in North Dakota, and fully develop in between. Although not all wells are economical, the economic success rate has been near 75% with more than 90% of wells finding oil. Currently, only about 15% of the play has been drilled, and recovery rates are less than 5%, providing a significant future of wells to be drilled and untouched hydrocarbons to be pursued through improved stimulation practices or enhanced oil recovery. This study provides the technical characterizations that are necessary to improve knowledge, provide characterization, validate generalizations, and provide insight relative to hydrocarbon recovery in the Bakken and Three Forks Formations. Oil-saturated rock charged from the Bakken shales and prospective Three Forks can be produced given appropriate stimulation treatments. Highly concentrated fracture stimulations with ceramic- and sand-based proppants appear to be providing the best success for areas outside the Parshall and Sanish Fields. Targeting of specific lithologies can influence production from both natural and induced fracture conductivity. Porosity and permeability are low, but various lithofacies units within the formation are highly saturated and, when targeted with appropriate technology, release highly economical quantities of hydrocarbons.

Evolution of multi-mineral formation evaluation using LWD data in complex carbonates offshore Brazil

Energy Technology Data Exchange (ETDEWEB)

Ferraris, Paolo; Borovskaya, Irina [Schlumberger, Houston, TX (United States)

2012-07-01

Petrophysical Formation Evaluation using Logging While Drilling (LWD) measurements is a new requisite when drilling in carbonates reservoirs offshore Brazil. These reservoirs are difficult to characterize due to an unusual mixture of the minerals constituting the matrix and affecting rock texture. As wells are getting deeper and more expensive, an early identification of the drilled targets potential is necessary for valuable decisions. Brazil operators have been especially demanding towards service providers, pushing for development of suitable services able to positively identify and quantify not only the presence of hydrocarbons but also their flowing capability. In addition to the standard gamma ray / resistivity / porosity and density measurements, three new measurements have proven to be critical to evaluate complex carbonate formations: Nuclear Magnetic Resonance (NMR), Spectroscopy and Capture Cross-Section (sigma). Under appropriate logging conditions, NMR data provides lithology independent porosity, bound and free fluids fractions, reservoir texture and permeability. Capture Spectroscopy allows assessment of mineral composition in terms of calcite, dolomite, quartz and clay fractions, and in addition highlights presence of other heavier minerals. Finally, sigma allows performing a volumetric formation evaluation without requiring custom optimization of the classical exponents used in all forms of resistivity saturation equations. All these new measurements are inherently statistical and if provided by wireline after drilling the well they may result in significant usage of rig time. When acquired simultaneously while drilling they have three very clear advantages: 1) no extra rig time, 2) improved statistics due to long formation exposure (drilling these carbonates is a slow process and rate of penetration (ROP) rarely exceeds 10 m/hr), 3) less invasion effect and better hole condition. This paper describes the development of two LWD tools performing the

Geological map of Uruguay scale 1.100.000 Canada Nieto Sheet P-23

International Nuclear Information System (INIS)

Ferrando, L; Eugui, W; Cabrera, Z; Elias, R

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Canada Nieto) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils of the pre devoniam period in the Mercedes , Asencio and Fray Bentos formations

Permian Triassic palynofloral transition in Chintalapudi area ...

Indian Academy of Sciences (India)

The entire 606 m-thick sedimentary sequence in borecore MCP-7 from Chintalapudi area, Chintalapudi sub-basin has been lithologically designated as Kamthi Formation. However, the palynological investigation revealed five distinct palynoassemblages, which essentially fall under two groups, one group ...

Geological map of Uruguay scale 1,100,000. Agraciada Sheet R-23, Nueva Palmira Sheet R- 24

International Nuclear Information System (INIS)

Ferrando, L.; Eugui, W.; Cabrera, Z.; Elias, R.

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Agraciada and Nueva Palmira) and the explanatory memoranda which describes the geological , lithological and sedimentological soil characteristics of: Fray Bentos, Camacho, Raygon, Libertad and Villa Soriano formations

Geological formation characterisation by acoustic waves

International Nuclear Information System (INIS)

Mari, J.L.; Gaudiani, P.; Delay, J.

2010-01-01

Document available in extended abstract form only. For many years, the transmission of a sonic wave through formations has been used for drilling measurements. The tools used are of monopole or dipole type. Monopole-type tools are the most commonly used. Sources and receivers are multidirectional. In the fluid, sources generate a compression wave which creates in the formation a compression wave (P wave) and a shear wave (S wave) at the refraction limit angles. In a vertical well, such tools permit the recording of five propagation modes: the refracted compression wave, the refracted shear wave (only in fast formations), the fluid wave, two dispersive guided modes which are the pseudo Rayleigh waves (only in fast formations) and the Stoneley waves. Full waveform acoustic measurements are represented as constant-offset sections or as common source point gathers, similar to those used in seismic operations. For the different modes, the acoustic parameters which are usually measured are: picked time, amplitude and frequency. The acoustic parameters allow one to determine the propagation velocities of the various modes and some petro-physical parameters and to obtain lithologic and mechanical information if the shear velocity of the formation has been measured. Usually the picking of the refracted S wave is difficult due to the interferences of different wave trains such as leaky modes associated with the refracted P waves and the pseudo Rayleigh. To compute a continuous log of shear velocity, we propose an hybrid method based on the local measurement of the shear velocity (picking of the arrival time of the refracted S wave) and on the analysis of the dispersion curve of the Stoneley modes ( Biot 1956, White 1965). We also show the benefit of using a shape index parameter named Ic, computed from the amplitudes (A1, A2 and A3) of the first refracted P wave to detect acoustic anomalies specially in fractured formation. The Ic parameter is independent of the energy of

The silicon isotopic composition of fine-grained river sediments and its relation to climate and lithology

Science.gov (United States)

Bayon, G.; Delvigne, C.; Ponzevera, E.; Borges, A. V.; Darchambeau, F.; De Deckker, P.; Lambert, T.; Monin, L.; Toucanne, S.; André, L.

2018-05-01

The δ30Si stable isotopic composition of silicon in soils and fine-grained sediments can provide insights into weathering processes on continents, with important implications on the Si budget of modern and past oceans. To further constrain the factors controlling the distribution of Si isotopes in sediments, we have analysed a large number (n = 50) of separate size-fractions of sediments and suspended particulate materials collected near the mouth of rivers worldwide. This includes some of the world's largest rivers (e.g. Amazon, Congo, Mackenzie, Mississippi, Murray-Darling, Nile, Yangtze) and rivers from the case study areas of the Congo River Basin and Northern Ireland. Silt-size fractions exhibit a mean Si isotopic composition (δ30Si = -0.21 ± 0.19‰; 2 s.d.) similar to that previously inferred for the upper continental crust. In contrast, clay-size fractions display a much larger range of δ30Si values from -0.11‰ to -2.16‰, which yield a global δ30Siclay of -0.57 ± 0.60‰ (2 s.d.) representative of the mean composition of the average weathered continental crust. Overall, these new data show that the Si isotopic signature transported by river clays is controlled by the degree of chemical weathering, as inferred from strong relationships with Al/Si ratios. At a global scale, the clay-bound Si isotopic composition of the world's largest river systems demonstrates a link with climate, defining a general correlation with mean annual temperature (MAT) in corresponding drainage basins. While the distribution of Si isotopes in river sediments also appears to be influenced by the tectonic setting, lithological effects and sediment recycling from former sedimentary cycles, our results pave the way for their use as paleo-weathering and paleo-climate proxies in the sedimentary record.

Study of Diagenetic Features in Rudist Buildups of Cretaceous Edwards Formation Using Ground Based Hyperspectral Scanning and Terrestrial LiDAR

Science.gov (United States)

Krupnik, D.; Khan, S.; Okyay, U.; Hartzell, P. J.; Biber, K.

2015-12-01

Ground based remote sensing is a novel technique for development of digital outcrop models which can be instrumental in performing detailed qualitative and quantitative sedimentological analysis for the study of depositional environment, diagenetic processes, and hydrocarbon reservoir characterization. For this investigation, ground-based hyperspectral data collection is combined with terrestrial LiDAR to study outcrops of Late Albian rudist buildups of the Edwards formation in the Lake Georgetown Spillway in Williamson County, Texas. The Edwards formation consists of shallow water deposits of reef and associated inter-reef facies, including rudist bioherms and biostromes. It is a significant aquifer and was investigated as a hydrocarbon play in south central Texas. Hyperspectral data were used to map compositional variation in the outcrop by distinguishing spectral properties unique to each material. Lithological variation was mapped in detail to investigate the structure and composition of rudist buildups. Hyperspectral imagery was registered to a 3D model produced from the LiDAR point cloud with an accuracy of up to one pixel. Flat-topped toucasid-rich bioherm facies were distinguished from overlying toucasid-rich biostrome facies containing chert nodules, overlying sucrosic dolostones, and uppermost peloid wackestones and packstones of back-reef facies. Ground truth was established by petrographic study of samples from this area and has validated classification products of remote sensing data. Several types of porosity were observed and have been associated with increased dolomitization. This ongoing research involves integration of remotely sensed datasets to analyze geometrical and compositional properties of this carbonate formation at a finer scale than traditional methods have achieved and seeks to develop a workflow for quick and efficient ground based remote sensing-assisted outcrop studies.

Hydrogeological and hydrochemical characterization of unconfined aquifer located in the alteration mantle of the Serra Geral Formation, in the Taquari-Antas river basin, northeast of Rio Grande do Sul State

Directory of Open Access Journals (Sweden)

Gisele Cemin

2012-08-01

Full Text Available This paper presents the hydrogeological and hydrochemical characterization of the unconfined aquifer located in the alteration mantle in the volcanic rocks from Serra Geral Formation, in the northeast region of Rio Grande do Sul State. This aquifer is conditioned by the soil, topography, lithology and climate, being characterized by a saturated layer thinner than 1,7 m, static levels between 0 and 1 m and low flow (<0,5 m3/h. These waters are of calcium or magnesium bicarbonate type, and low alkalinity and electrical conductivity, low calcium, magnesium, sodium, potassium and chloride concentrations, and high iron and manganese concentrations. Additionally, these waters have high concentration of nitrates (mean above 10 mg/L and the presence of total coliforms. These characteristics evidence a quick circulation between the recharging and discharge zones in the aquifer.

The bedrock electrical conductivity structure of Northern Ireland

Science.gov (United States)

Beamish, David

2013-08-01

An airborne geophysical survey of the whole of Northern Ireland has provided over 4.8 M estimates of the bedrock conductivity over the wide range of geological formations present. This study investigates how such data can be used to provide additional knowledge in relation to existing digital geological map information. A by-product of the analysis is a simplification of the spatially aggregated information obtained in such surveys. The methodology used is a GIS-based attribution of the conductivity estimates using a lithological classification of the bedrock formations. A 1:250k geological classification of the data is performed leading to a 56 unit lithological and geostatistical analysis of the conductivity information. The central moments (medians) of the classified data are used to provide a new digital bedrock conductivity map of Northern Ireland with values ranging from 0.32 to 41.36 mS m-1. This baseline map of conductivities displays a strong correspondence with an existing 4 quadrant, chrono-geological description of Northern Ireland. Once defined, the baseline conductivity map allows departures from the norm to be assessed across each specific lithological unit. Bulk electrical conductivity is controlled by a number of petrophysical parameters and it is their variation that is assessed by the procedures employed. The igneous rocks are found to display the largest variability in conductivity values and many of the statistical distributions are multi-modal. A sequence of low-value modes in these data are associated with intrusives within volcanic complexes. These and much older Neoproterzoic rocks appear to represent very low porosity formations that may be the product of rapid cooling during emplacement. By way of contrast, extensive flood basalts (the Antrim lavas) record a well-defined and much higher median value (12.24 mS m-1) although they display complex spatial behaviour in detail. Sedimentary rocks appear to follow the broad behaviours anticipated

AUTHOR INDEX

Indian Academy of Sciences (India)

Magnetic anomalies of offshore Krishna–Godavari basin, eastern continental margin of India. 405. Tewari Ram Chandra. Application of Markov chain and entropy analysis to lithologic succession – an example from the early. Permian Barakar Formation, Bellampalli coalfield,. Andhra Pradesh, India. 583. Thakur Alpana.

Preliminary three-dimensional geohydrologic framework of the San Antonio Creek Groundwater Basin, Santa Barbara County, California

Science.gov (United States)

Cromwell, G.; Sweetkind, D. S.; O'leary, D. R.

2017-12-01

The San Antonio Creek Groundwater Basin is a rural agricultural area that is heavily dependent on groundwater to meet local water demands. The U.S. Geological Survey (USGS) is working cooperatively with Santa Barbara County and Vandenberg Air Force Base to assess the quantity and quality of the groundwater resources within the basin. As part of this assessment, an integrated hydrologic model that will help stakeholders to effectively manage the water resources in the basin is being developed. The integrated hydrologic model includes a conceptual model of the subsurface geology consisting of stratigraphy and variations in lithology throughout the basin. The San Antonio Creek Groundwater Basin is a relatively narrow, east-west oriented valley that is structurally controlled by an eastward-plunging syncline. Basin-fill material beneath the valley floor consists of relatively coarse-grained, permeable, marine and non-marine sedimentary deposits, which are underlain by fine-grained, low-permeability, marine sedimentary rocks. To characterize the system, surficial and subsurface geohydrologic data were compiled from geologic maps, existing regional geologic models, and lithology and geophysical logs from boreholes, including two USGS multiple-well sites drilled as part of this study. Geohydrologic unit picks and lithologic variations are incorporated into a three-dimensional framework model of the basin. This basin (model) includes six geohydrologic units that follow the structure and stratigraphy of the area: 1) Bedrock - low-permeability marine sedimentary rocks; 2) Careaga Formation - fine to coarse grained near-shore sandstone; 3) Paso Robles Formation, lower portion - sandy-gravely deposits with clay and limestone; 4) Paso Robles Formation, middle portion - clayey-silty deposits; 5) Paso Robles Formation, upper portion - sandy-gravely deposits; and 6) recent Quaternary deposits. Hydrologic data show that the upper and lower portions of the Paso Robles Formation are

Time-transgressive tunnel valley formation indicated by infill sediment structure, North Sea - the role of glaciohydraulic supercooling

DEFF Research Database (Denmark)

Kristensen, Thomas Bojer; Piotrowski, Jan; Huuse, Mads

2008-01-01

Structure and lithology of the infill sediments from 16 subglacial buried tunnel valleys of Pleistocene age in the North Sea were analyzed using 3D seismic data and geophysical log data from five hydrocarbon exploration wells. The infill sediments are characterized by three seismic facies: Facies...

LITHOSTRATIGRAPHY, CONODONT BIOSTRATIGRAPHY AND DEPOSITIONAL ENVIRONMENT OF THE MIDDLE DEVONIAN (GIVETIAN TO EARLY CARBONIFEROUS (TOURNAISIAN LIPAK FORMATION IN THE PIN VALLEY OF SPITI (NW INDIA

Directory of Open Access Journals (Sweden)

ERICH DRAGANITS

2002-03-01

Full Text Available Bed-by-bed lithostratigraphic sections combined with sequence stratigraphy and conodont biostratigraphy provide new information on the depositional environment and age of the Lipak Formation in the Pin Valley (Spiti. The formation comprises mixed siliciclastic and calcareous sediments at lower levels, richly fossiliferous limestones with two distinct sandstone incursions at higher levels, and dark mudstones followed by a thin siltstone interval. The upper limit of the Lipak Formation is defined by the angular unconformity below the sandstones of the Permian Gechang Formation. Lithologic correlation with sections in upper Lahaul indicates that, in the Pin Valley, the formation has been truncated just below its characteristic gypsum horizon. The lower boundary of the Lipak Formation is gradational from coastal arenites of the Muth Formation; the mappable boundary is drawn at the first appearance of dark carbonaceous, argillaceous siltstone and shale.Sedimentary structures, microfacies and conodont faunas indicate a general shallow marine depositional environment of the Lipak Formation in the Pin Valley; five sequence stratigraphic units have been distinguished. Conodont data demonstrate that the lowest 33 m of the Lipak Formation of the Pin Valley is mid to late Early varcus Subzone with characteristic species of Icriodus and Bipennatus. A previously unrecognised hiatus at c. 33 m above the base, at the boundary of sequence stratigraphic units S1 and S2, represents the interval Middle varcus Subzone to at least the end of the late Famennian Early expansa Zone. Because this hiatus does not correspond to a mappable boundary, no division of the Lipak Formation into named stratigraphic units is suggested, but we refer informally to the sediments represented by cycle S1 as Lipak A, and the sediments represented by cycles S2-S5 as Lipak B. Determination of S1 as Early varcus Subzone provides a maximum age for the gradationally underlying Muth Formation

Lavalleja group (Uruguay), a neoproterozoic metavolcanic-metasedimentary sequence:geochemistry and geochronological features

International Nuclear Information System (INIS)

Preciozzi, F.; Sanchez Bettucci, L.; Basei, M.

2003-01-01

The Lavalleja Group is located in the southern portion of the Dom Feliciano Belt, being correlated with the Porongos and Brusque Groups in Brazil. This Group has a granitic-gneissic basement probably associated to the Valentines Block and Pavas Terrane, with ages ranging from 1.75 to 2.1 Ga (U-Pb determination). An older basement probably occurs. This Group is characterized by narrow bands of metasedimentary and metavolcanic rocks and is subdivided into three formations (Sánchez-Bettucci, 1998). The first one includes lithologies with a very low to anquimetamorphism degree; the second one is formed by rocks with low metamorphism degree (lower greenschist facies) and the last one presents an upper greenschist facies in transition to upper and lower amphibolite facies. They correspond respectively to the Minas, Fuente del Puma and Zanja del Tigre Formations. The Minas Formation includes only metasedimentary rocks: limestones, dolomites, metapelites, quartzites and arkoses. The Fuente del Puma Formation is formed by three units (Sanchez-Bettucci, 1998): the sedimentary, volcanic and hornblenditic gabbros units. The Zanja del Tigre Formation shows lithologies of medium metamorphism degree, developed to the east of the two other Formations. Syn-collisional to postectonic granitic bodies are associated to the Lavalleja Group. These granitic bodies correspond to the Carapé Complex. The paleoproterozoic basement of Lavalleja Group and Carapé Complex is named Campanero Unit

Prediction of acid mine drainage generation potential of various lithologies using static tests: Etili coal mine (NW Turkey) as a case study.

Science.gov (United States)

Yucel, Deniz Sanliyuksel; Baba, Alper

2016-08-01

The Etili neighborhood in Can County (northwestern Turkey) has large reserves of coal and has been the site of many small- to medium-scale mining operations since the 1980s. Some of these have ceased working while others continue to operate. Once activities cease, the mining facilities and fields are usually abandoned without rehabilitation. The most significant environmental problem is acid mine drainage (AMD). This study was carried out to determine the acid generation potential of various lithological units in the Etili coal mine using static test methods. Seventeen samples were selected from areas with high acidic water concentrations: from different alteration zones belonging to volcanic rocks, from sedimentary rocks, and from coals and mine wastes. Static tests (paste pH, standard acid-base accounting, and net acid generation tests) were performed on these samples. The consistency of the static test results showed that oxidation of sulfide minerals, especially pyrite-which is widely found not only in the alteration zones of volcanic rocks but also in the coals and mine wastes-is the main factor controlling the generation of AMD in this mine. Lack of carbonate minerals in the region also increases the occurrence of AMD.

The Cannery Formation--Devonian to Early Permian arc-marginal deposits within the Alexander Terrane, Southeastern Alaska

Science.gov (United States)

Karl, Susan M.; Layer, Paul W.; Harris, Anita G.; Haeussler, Peter J.; Murchey, Benita L.

2011-01-01

The Cannery Formation consists of green, red, and gray ribbon chert, siliceous siltstone, graywacke-chert turbidites, and volcaniclastic sandstone. Because it contains early Permian fossils at and near its type area in Cannery Cove, on Admiralty Island in southeastern Alaska, the formation was originally defined as a Permian stratigraphic unit. Similar rocks exposed in Windfall Harbor on Admiralty Island contain early Permian bryozoans and brachiopods, as well as Mississippian through Permian radiolarians. Black and green bedded chert with subordinate lenses of limestone, basalt, and graywacke near Kake on Kupreanof Island was initially correlated with the Cannery Formation on the basis of similar lithology but was later determined to contain Late Devonian conodonts. Permian conglomerate in Keku Strait contains chert cobbles inferred to be derived from the Cannery Formation that yielded Devonian and Mississippian radiolarians. On the basis of fossils recovered from a limestone lens near Kake and chert cobbles in the Keku Strait area, the age of the Cannery Formation was revised to Devonian and Mississippian, but this revision excludes rocks in the type locality, in addition to excluding bedded chert on Kupreanof Island east of Kake that contains radiolarians of Late Pennsylvanian and early Permian age. The black chert near Kake that yielded Late Devonian conodonts is nearly contemporaneous with black chert interbedded with limestone that also contains Late Devonian conodonts in the Saginaw Bay Formation on Kuiu Island. The chert cobbles in the conglomerate in Keku Strait may be derived from either the Cannery Formation or the Saginaw Bay Formation and need not restrict the age of the Cannery Formation, regardless of their source. The minimum age of the Cannery Formation on both Admiralty Island and Kupreanof Island is constrained by the stratigraphically overlying fossiliferous Pybus Formation, of late early and early late Permian age. Because bedded radiolarian

An integrated analysis of the March 2015 Atacama floods

Science.gov (United States)

Wilcox, Andrew C.; Escauriaza, Cristian; Agredano, Roberto; Mignot, Emmanuel; Zuazo, Vicente; Otárola, Sebastián.; Castro, Lina; Gironás, Jorge; Cienfuegos, Rodrigo; Mao, Luca

2016-08-01

In March 2015 unusual ocean and atmospheric conditions produced many years' worth of rainfall in a 48 h period over northern Chile's Atacama Desert, one of Earth's driest regions, resulting in catastrophic flooding. Here we describe the hydrologic and geomorphic drivers of and responses to the 2015 Atacama floods. In the Salado River, we estimated a flood peak discharge of approximately 1000 m3/s, which caused widespread damage and high sediment loads that were primarily derived from valley-fill erosion; hillslopes remained surprisingly intact despite their lack of vegetation. In the coastal city of Chañaral, flooding of the Salado River produced maximum water depths over 4.5 m, meters thick mud deposition in buildings and along city streets, and coastal erosion. The Atacama flooding has broad implications in the context of hazard reduction, erosion of contaminated legacy mine tailings, and the Atacama's status as a terrestrial analog for Mars.

Geological map of Uruguay Esc 1,100,000. Bequelo Sheet N0-20

International Nuclear Information System (INIS)

Montana, J.; Ford, I.; Morales, H.

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Bequelo) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics of the precambrian period in the Bequelo stream as well as the Mercedes , Asencio and Fray Bentos formations

Geological map of Uruguay Esc 1,100,000. Molles Sheet K-19

International Nuclear Information System (INIS)

Ford, I

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Molles) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils belong to the Cretaceous, Tertiary and Quaternary period in Arapey, Mercedes, Asencio, Palmitas, Fray Bentos and Libertad formations

Geological map of Uruguay Esc 1,100,000. Chafalote Sheet D-26

International Nuclear Information System (INIS)

Masquelin, H; Tabo, F

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Chafalote) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils. The area corresponding to Chafalote is located in central and eastern metamorphic formation constituted by Lavalleja-Rocha group

Controls on the molecular and carbon isotopic composition of organic matter deposited in a Kimmeridgian euxinic shelf sea: Evidence for preservation of carbohydrates through sulfurisation

NARCIS (Netherlands)

Sinninghe Damsté, J.S.; Kaam-Peters, H.M.E. van; Schouten, S.; Koster, J.

1998-01-01

Thirteen samples from the Kimmeridge Clay Formation (KCF) in Dorset, covering all different lithologies, were studied using bulk and molecular geochemical and microscopical techniques. Our data show that the positive correlation between TOC and 13CTOC reported for shales (Huc et al., 1992) also

Geological map of Uruguay Esc 1,100,000. Palmitas Sheet 0- 22

International Nuclear Information System (INIS)

Ford, I.; Gancio, F

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Molles) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils belong to the Proterozoic, Cretaceous, Tertiary and Quaternary period in Mercedes, Asencio, Palmitas and Fray Bentos formations

Příspěvek k litologii křídových souvrství na profilu Bystrý potok u Trojanovic (slezská jednotka, vnější Západní Karpaty, Česká republika)

Czech Academy of Sciences Publication Activity Database

Boorová, D.; Jansa, L. F.; Matýsek, D.; Skupien, P.; Vašíček, Zdeněk

2008-01-01

Roč. 93, - (2008), s. 185-217 ISSN 1211-8796 Grant - others:GA ČR(CZ) GA205/05/0917 Program:GA Institutional research plan: CEZ:AV0Z30860518 Keywords : Silesian Unit * lithology * Lhoty - Mazák formations Subject RIV: DB - Geology ; Mineralogy

Dynamics of soil organic carbon in density fractions during post-agricultural succession over two lithology types, southwest China.

Science.gov (United States)

Wen, Li; Li, Dejun; Chen, Hao; Wang, Kelin

2017-10-01

Agricultural abandonment has been proposed as an effective way to enhance soil organic carbon (SOC) sequestration. Nevertheless, SOC sequestration in the long term is largely determined by whether the stable SOC fractions will increase. Here the dynamics of SOC fractions during post-agricultural succession were investigated in a karst region, southwest China using a space-for-time substitution approach. Cropland, grassland, shrubland and secondary forest were selected from areas underlain by dolomite and limestone, respectively. Density fractionation was used to separate bulk SOC into free light fraction (FLFC) and heavy fraction (HFC). FLFC contents were similar over dolomite and limestone, but bulk SOC and HFC contents were greater over limestone than over dolomite. FLFC content in the forest was greater than in the other vegetation types, but bulk SOC and HFC contents increased from the cropland through to the forest for areas underlain by dolomite. The contents of bulk SOC and its fractions were similar among the four vegetation types over limestone. The proportion of FLFC in bulk SOC was higher over dolomite than over limestone, but the case was inverse for the proportion of HFC, indicating SOC over limestone was more stable. However, the proportions of both FLFC and HFC were similar among the four vegetation types, implying that SOC stability was not changed by cropland conversion. Exchangeable calcium explained most of the variance of HFC content. Our study suggests that lithology not only affects SOC content and its stability, but modulates the dynamics of SOC fractions during post-agricultural succession. Copyright © 2017 Elsevier Ltd. All rights reserved.

Assessment of landslide risk using gis and statistical methods in kysuce region

Directory of Open Access Journals (Sweden)

Barančoková Mária

2014-03-01

Full Text Available The landslide susceptibility was assessed based on multivariation analysis. The input parameters were represented by lithology, land use, slope inclination and average annual precipitation. These parameters were evaluated as independent variables, and the existing landslides as dependent variables. The individual input parameters were reclassified and spatially adjusted. Spatial analysis resulted in 15 988 combinations of input parameters representing the homogeneous condition unit (HCU . Based on the landslide density within individual units, the HCU polygons have been classified according to landslide risk into stable, conditionally stable, conditionally stable and unstable (subdivided into low, medium and high landslide risk. A total of 2002 HCU s were affected by landslides, and the remaining 13 986 were not affected. The total HCU area affected by landslides is about 156.92 km2 (20.1%. Stable areas covered 623.01 km2 (79.8%, and conditionally stable areas covered 228.77 km2 (29.33% out of this area. Unstable areas were divided into three levels of landslide risk - low, medium and high risk. An area of 111.19 km2 (14.3% represents low landslide risk, medium risk 29.7 km2 (3.8% and 16.01 km2 (2% represents high risk. Since Zlín Formation lithological unit covers approximately one-third of the study area, it also influences the overall landslide risk assessment. This lithological formation covers the largest area within all landslide risk classes as well as in conditionally stable areas. The most frequent slope class was in the range of 14-19. The higher susceptibility of Zlín Formation to landslides is caused mainly by different geomorphological value of claystone and sandstone sequence. The higher share of claystone results in higher susceptibility of this formation to exogenous degradation processes.

Densities and Kinematic Viscosities for the Systems Benzene + Methyl Formate, Benzene + Ethyl Formate, Benzene + Propyl Formate, and Benzene + Butyl Formate

DEFF Research Database (Denmark)

Emmerling, Uwe; Rasmussen, Peter

1998-01-01

a Redlich-Kister type of expression with temperature-independent parameters and the data for the systems benzene + ethyl formate, benzene + propyl formate, and benzene + butyl formate with temperature-dependent parameters. The viscosities have furthermore been compared to values predicted by means of the GC......Densities and kinematic viscosities have been measured for the system benzene + methyl formate at 20°C and for the systems benzene + ethyl formate, benzene + propyl formate, and benzene + butyl formate from 20°C to 50°C. The results for the system benzene + methyl formate have been correlated using...

Equivalent formation strength as a proxy tool for exploring the existence and distribution of gas hydrates

Science.gov (United States)

Hamada, Y.; Yamada, Y.; Sanada, Y.; Nakamura, Y.; Kido, Y. N.; Moe, K.

2017-12-01

Gas hydrates bearing layer can be normally identified by a basement simulating reflector (BSR) or well logging because of their high acoustic- and electric impedance compared to the surrounding formation. These characteristics of the gas hydrate can also represent contrast of in-situ formation strength. We here attempt to describe gas hydrate bearing layers based on the equivalent strength (EST). The Indian National Gas Hydrate Program (NGHP) Expedition 02 was executed 2015 off the eastern margin of the Indian Peninsula to investigate distribution and occurrence of gas hydrates. From 25 drill sites, downhole logging data, cored samples, and drilling performance data were collected. Recorded drilling performance data was converted to the EST, which is a developed mechanical strength calculated only by drilling parameters (top drive torque, rotation per minute , rate of penetration , and drill bit diameter). At a representative site, site 23, the EST shows constant trend of 5 to 10 MPa, with some positive peaks at 0 - 270 mbsf interval, and sudden increase up to 50 MPa above BSR depth (270 - 290 mbsf). Below the BSR, the EST stays at 5-10 MPa down to the bottom of the hole (378 mbsf). Comparison of the EST with logging data and core sample description suggests that the depth profiles of the EST reflect formation lithology and gas hydrate content: the EST increase in the sand-rich layer and the gas hydrate bearing zone. Especially in the gas hydrate zone, the EST curve indicates approximately the same trend with that of P-wave velocity and resistivity measured by downhole logging. Cross plot of the increment of the EST and resistivity revealed the relation between them is roughly logarithmic, indicating the increase and decrease of the EST strongly depend on the saturation factor of gas hydrate. These results suggest that the EST, proxy of in-situ formation strength, can be an indicator of existence and amount of the gas-hydrate layer. Although the EST was calculated

Advances in complex reservoir evaluation based on geophysical well logs

Energy Technology Data Exchange (ETDEWEB)

Fertl, W.H.; Sinha, A.K. (Western Atlas International, Inc., Houston, TX (USA)); McDougall, J.G. (Western Atlas Canada Ltd., Calgary, AB (Canada))

1988-09-01

The matrix of reservoirs having complex lithologies, cause different density, neutron, and acoustic responses. Therefore the lithologies and effective porosity of reservoirs can be determined by using various crossplot techniques on data collected from two of these logs. The Complex Reservoir Analysis program (CRA) computes lithology, porosity, water saturation and relative permeabilities in formations with interbedded limestone, dolomite, and anhydrite. Porosity options include crossplot and individual log response techniques. Corrections for light hydrocarbons were applied. In solving for porosity and mineral volumes, sand, limestone, dolomite, and anhydrite lines were defined on either density/neutron or neutron/acoustic crossplots. Four additional mineral lines were specified. Incorporation of Pe data from the Z-Densilog provided a significant advance in evaluating complex reservoirs via the Z-CRA analysis. The classic reservoir evaluation program CLASS, was used to perform both minerals and shaly evaluation based on density, neutron, resistivity, and natural gamma ray spectral measurements. Computations included total and effective porosities, fluid saturation distribution based on the Wasman-Smits model, productivity indices, and volume and distribution of clay minerals. Additional computed formation parameters included log-derived cation exchange capacity and hydrogen index of dry clay matrix to determine the type and amount of smectite, illite and chlorite/kaolinite present. Canadian field experiences was used to illustrate and support the techniques described. 11 refs., 11 figs., 6 tabs.

Discovery of abundant cellulose microfibers encased in 250 Ma Permian halite: a macromolecular target in the search for life on other planets.

Science.gov (United States)

Griffith, Jack D; Willcox, Smaranda; Powers, Dennis W; Nelson, Roger; Baxter, Bonnie K

2008-04-01

In this study, we utilized transmission electron microscopy to examine the contents of fluid inclusions in halite (NaCl) and solid halite crystals collected 650 m below the surface from the Late Permian Salado Formation in southeastern New Mexico (USA). The halite has been isolated from contaminating groundwater since deposition approximately 250 Ma ago. We show that abundant cellulose microfibers are present in the halite and appear remarkably intact. The cellulose is in the form of 5 nm microfibers as well as composite ropes and mats, and was identified by resistance to 0.5 N NaOH treatment and susceptibility to cellulase enzyme treatment. These cellulose microfibers represent the oldest native biological macromolecules to have been directly isolated, examined biochemically, and visualized (without growth or replication) to date. This discovery points to cellulose as an ideal macromolecular target in the search for life on other planets in our Solar System.

Geological map of Uruguay Esc 1,100,000. El Ombu Sheet N-18

International Nuclear Information System (INIS)

Ford, I

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (El Ombu) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils belong to the Cretaceous, Tertiary and Quaternary period in Arapey, Mercedes, Asencio, Palmitas, Fray Bentos and Libertad formations

Estimation of the petrophysical parameters of sediments from Chad ...

African Journals Online (AJOL)

Porosity was estimated from three methods, and polynomial trends having fits ranging between 0.0604 and 0.478 describe depth - porosity variations. Interpretation of the trends revealed lithology trend that agree with the trends of shaliness. Estimates of average effective porosities of formations favorably compared with ...

Geological map of Uruguay Esc 1,100,000. Paso del Palmar Sheet N-19

International Nuclear Information System (INIS)

Ford, I.; Montana, J.; Morales, H.

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Paso del Palmar) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils belong to Cretaceous, Tertiary and Quaternary period in San Gregorio, Arapey, Mercedes, Asencio and Fray Bentos formations

Ground-water investigations of the Project Gnome area, Eddy and Lea Counties, New Mexico

Science.gov (United States)

Cooper, J.B.

1962-01-01

The U.S. Atomic Energy Commission, through the Office of Test Operations, Albuquerque Operations Office, plans to detonate a nuclear device in a massive salt bed 1,200 feet beneath the land surface. The project, known as Project Gnome, is an element of the Plowshare program--a study of peacetime applications of nuclear fission. The location of the proposed underground shot is in a sparsely-populated area in southeastern Eddy County, N. Mex., east of the Pecos River and about 25 miles southeast of the city of Carlsbad. The area is arid to Semiarid and ground water is a vital factor in the economic utilization of the land, which is primarily used for stock raising. An investigation of the Project Gnome site and surrounding area for the purposes of evaluating the ground-water resources and the possible effect upon them from the detonation of the nuclear shot was desired by the Commission. This report describes work done by the U.S. Geological Survey on behalf of the Commission and presents results of the investigation of the ground-water resources and geology of the area. The most intensive investigations were made within a 15-mile radius of the site of Project Gnome and mainly on the east side of the Pecos River. The total area of study of over 1,200 square miles includes parts of Eddy and Lea Counties, N. Mex. The Project Gnome site is in the sedimentary Delaware Basin. It is underlain by about 18,000 feet of sedimentary rocks ranging in age from Ordovician to Recent. Upper Permian evaporitic rocks, which contain the principal source of potash available in the United States, are worked in nearby mines. The potash minerals are found in a massive salt bed about 1,400 feet thick in the Salado Formation of Permian age. The land surface of the area is covered mostly by a wind-blown sand and caliche; however, rocks of the Rustler Formation of Permian age and younger rocks of Permian, Triassic, Pleistocene(?) and Recent age crop out at several localities. Solution by

Area of Interest 1, CO₂ at the Interface. Nature and Dynamics of the Reservoir/Caprock Contact and Implications for Carbon Storage Performance

Energy Technology Data Exchange (ETDEWEB)

Mozley, Peter [New Mexico Institute Of Mining And Technology, Socorro, NM (United States); Evans, James [New Mexico Institute Of Mining And Technology, Socorro, NM (United States); Dewers, Thomas [New Mexico Institute Of Mining And Technology, Socorro, NM (United States)

2014-10-31

We examined the influence of geologic features present at the reservoir/caprock interface on the transmission of supercritical CO₂ into and through caprock. We focused on the case of deformation-band faults in reservoir lithologies that intersect the interface and transition to opening-mode fractures in caprock lithologies. Deformation-band faults are exceeding common in potential CO₂ injection units and our fieldwork in Utah indicates that this sort of transition is common. To quantify the impact of these interface features on flow and transport we first described the sedimentology and permeability characteristics of selected sites along the Navajo Sandstone (reservoir lithology) and Carmel Formation (caprock lithology) interface, and along the Slickrock Member (reservoir lithology) and Earthy Member (caprock lithology) of the Entrada Sandstone interface, and used this information to construct conceptual permeability models for numerical analysis. We then examined the impact of these structures on flow using single-phase and multiphase numerical flow models for these study sites. Key findings include: (1) Deformation-band faults strongly compartmentalize the reservoir and largely block cross-fault flow of supercritical CO₂. (2) Significant flow of CO₂ through the fractures is possible, however, the magnitude is dependent on the small-scale geometry of the contact between the opening-mode fracture and the deformation band fault. (3) Due to the presence of permeable units in the caprock, caprock units are capable of storing significant volumes of CO₂, particularly when the fracture network does not extend all the way through the caprock. The large-scale distribution of these deformation-bandfault-to-opening-mode-fractures is related to the curvature of the beds, with greater densities of fractures in high curvature regions. We also examined core and outcrops from the Mount Simon Sandstone and Eau Claire

Geological and physicochemical controls of the spatial distribution of partition coefficients for radionuclides (Sr-90, Cs-137, Co-60, Pu-239,240 and Am-241) at a site of nuclear reactors and radioactive waste disposal (St. Petersburg region, Russian Federation).

Science.gov (United States)

Rumynin, Vyacheslav G; Nikulenkov, Anton M

2016-10-01

The paper presents a study of the sorption properties of sediments of different geological ages and lithological types, governing radionuclide retention in the subsurface (up to 160 m beneath the surface) within the area of potential influence of the Northwestern Center of Atomic Energy (NWCAE), St. Petersburg region, RF. The focus of this work is mostly on the sedimentary rocks of two types, i.e., weakly cemented sandstone and lithified clay formations of Cambrian and Vendian series. The first lithological unit is associated with a groundwater reservoir (Lomonosov aquifer), and the second one, with both a relative aquitard in the upper part of the Vendian formation (Kotlin clay) and a regional aquifer (Gdov aquifer) in the lower part of the formation. The main mechanisms responsible for the variability of the sorption distribution coefficient (Kd, defined as the ratio of the concentration of solute on solid phase to its concentration in solution at equilibrium) was identified for radionuclides such as Sr-90, Cs-137, Co-60, Pu-239,240, and Am-241. It was shown that the main factors contributing to the chemical heterogeneity of the Cambrian sandstone were related to the presence of secondary minerals (iron and magnesium oxides and hydroxides produced by the weathering process) in trace amounts, forming correlated layer structures. The statistical analysis of nonlinear isotherms confirmed this conclusion. For the Vendian formation, a determinate trend was established in the Kd change over depth as a result of temporal trends in the sedimentation process and pore-water chemistry. The geostatistical characteristics and the spatial correlation models for describing linear sorption of different radionuclides are not identical, and the exhibition of chemical heterogeneity of sedimentary rock of a particular lithological type depends on radionuclide chemistry. Moreover, variogram analysis for some Kd data sets (both in Cambrian and Vendian formations) demonstrates the

Lithological and structural bedrock model of the Haestholmen study site, Loviisa, SE Finland

Energy Technology Data Exchange (ETDEWEB)

Front, K.; Paulamaeki, S.; Ahokas, H.; Anttila, P

1999-10-01

The Haestholmen study site is located within the anorogenic Wiborg rapakivi granite batholith, 1640 1630 Ma in age. The bedrock consists of various rapakivi granites, which can be divided into three groups or lithological units: (1) wiborgite and pyterlite, (2) porphyritic rapakivi granite, and (3) even-grained or weakly porphyritic rapakivi granite, pyterlite being the dominant rock type. The evengrained and weakly porphyritic rapakivi granite has been interpreted to form a younger intrusive unit with a thickness of ca. 500 m, dipping approx. 20 deg to the NNW-NNE. Surface fractures form a distinct orthogonal system, with three perpendicular fracture directions: fractures dipping steeply (dip >75 deg) to the NE-SW and NW-SE plus subhorizontal (dip <30 deg) fractures. The fracturing in the outcrops is sparse,the average fracture frequency being 0.6 fractures/m. The majority of the fractures in the drill cores are horizontal or very gently dipping and there is no difference in fracture orientations in regard to rock type or depth. Core samples are usually slightly fractured (1 - 3 fractures/m), even-grained rapakivi granites being in places abundantly fractured (3 10 fractures/m. The broken sections in Haestholmen core samples represent about 4.6 % of the total length of the samples. Calcite, dolomite, Fe- hydroxides and clay minerals (illite, montmorillonite and kaolinite) form the most typical fracture mineral phases throughout the drill cores. Core discing is locally seen as repeated fracture-like subparallel cracks in core with spacing of about some millimetres to tens of millimetres. The structural model contains 27 structures (denoted by the term R+number), more than half of which have been verified by direct observations from boreholes or from the VLJ repository. The remaining structures are mainly based on the geophysical interpretation, and have been classified as probable or possible fracture zones. In addition, local structures with uncertain orientation

Paleomagnetic data for Siberia and Baltica in the context of testing some geodynamic models of the formation of the Central Asian Mobile Belt

Science.gov (United States)

Shatsillo, A. V.; Kuznetsov, N. B.; Dronov, A. V.

2017-09-01

The synthesis of the paleomagnetic data for the Siberian (Siberia) and East European (Baltica) platforms shows that since the Early Paleozoic they could have experienced coherent movements as a part of consolidated continental agglomeration (a composite continent), which also includes the Arctida continent. Based on the paleomagnetic data, the relative positions of the Siberia and Baltica during the Ordovician is reconstructed, and a series of paleogeographical reconstructions describing the drift of the composite continent is suggested. The results of the lithologic-facial analysis of the sedimentation settings within the Ordovician basins of the Siberian and East European platforms and paleoclimatic markers are consistent with the suggested configuration and paleogeographical position of the composite continent. The suggested reconstructions and the ages of detrital zircons from the Early Paleozoic complexes of the platform margins and some objects of the Central Asian Mobile Belt (CAMB) reasonably well agree with the hypothesis (Sengör et al., 1993) which interprets the formation of the structure of CAMB Paleozoides as a result of the evolution of the island arc stretching along the margins of Siberia and Baltica.

Characteristics of volcanic reservoirs and distribution rules of effective reservoirs in the Changling fault depression, Songliao Basin

Directory of Open Access Journals (Sweden)

Pujun Wang

2015-11-01

Full Text Available In the Songliao Basin, volcanic oil and gas reservoirs are important exploration domains. Based on drilling, logging, and 3D seismic (1495 km2 data, 546 sets of measured physical properties and gas testing productivity of 66 wells in the Changling fault depression, Songliao Basin, eruptive cycles and sub-lithofacies were distinguished after lithologic correction of the 19,384 m volcanic well intervals, so that a quantitative analysis was conducted on the relation between the eruptive cycles, lithologies and lithofacies and the distribution of effective reservoirs. After the relationship was established between lithologies, lithofacies & cycles and reservoir physical properties & oil and gas bearing situations, an analysis was conducted on the characteristics of volcanic reservoirs and the distribution rules of effective reservoirs. It is indicated that 10 eruptive cycles of 3 sections are totally developed in this area, and the effective reservoirs are mainly distributed at the top cycles of eruptive sequences, with those of the 1st and 3rd Members of Yingcheng Formation presenting the best reservoir properties. In this area, there are mainly 11 types of volcanic rocks, among which rhyolite, rhyolitic tuff, rhyolitic tuffo lava and rhyolitic volcanic breccia are the dominant lithologies of effective reservoirs. In the target area are mainly developed 4 volcanic lithofacies (11 sub-lithofacies, among which upper sub-lithofacies of effusive facies and thermal clastic sub-lithofacies of explosion lithofacies are predominant in effective reservoirs. There is an obvious corresponding relationship between the physical properties of volcanic reservoirs and the development degree of effective reservoirs. The distribution of effective reservoirs is controlled by reservoir physical properties, and the formation of effective reservoirs is influenced more by porosity than by permeability. It is concluded that deep volcanic gas exploration presents a good

Vertical Electrical Sounding as a Viable Tool for Investigating ...

African Journals Online (AJOL)

... in the range 0.50m- 180.0m and thicknesses in the range 0.50m-75.0m. Area of probable subsurface lithological formations and their thicknesses have been identified for economical purposes, environmental purposes, engineering purposes, especially for future, mining of industries foundation operations and drilling.

Blending mining and nuclear industries at the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Walls, J.R.

1990-01-01

At the Waste Isolation Pilot Plant (WIPP) traditional procedures for underground mining activities have been significantly altered in order to assure underground safety and project adherence to numerous regulatory requirements. Innovative techniques have been developed for WIPP underground procedures, mining equipment, and operating environments. The mining emphasis at WIPP is upon the quality of the excavation, not (as in conventional mines) on the production of ore. The WIPP is a United States Department of Energy (DOE) project that is located 30 miles southeast of Carlsbad, New Mexico, where the nation's first underground engineered nuclear repository is being constructed. The WIPP site was selected because of its location amidst a 607 meter thick salt bed, which provides a remarkably stable rock formation for the permanent storage of nuclear waste. The underground facility is located 655 meters below the earth's surface, in the Salado formation, which comprises two-hundred million year old halites with minor amounts of clay and anhydrites. When completed, the WIPP underground facility will consist of two components: approximately 81 square kilometers of experimental areas, and approximately 405 square kilometers of repository. 3 figs

Phosphogenesis in the 2460 and 2728 million-year-old banded iron formations as evidence for biological cycling of phosphate in the early biosphere.

Science.gov (United States)

Li, Yi-Liang; Sun, Si; Chan, Lung S

2012-01-01

The banded iron formation deposited during the first 2 billion years of Earth's history holds the key to understanding the interplay between the geosphere and the early biosphere at large geological timescales. The earliest ore-scale phosphorite depositions formed almost at ∼2.0-2.2 billion years ago bear evidence for the earliest bloom of aerobic life. The cycling of nutrient phosphorus and how it constrained primary productivity in the anaerobic world of Archean-Palaeoproterozoic eons are still open questions. The controversy centers about whether the precipitation of ultrafine ferric oxyhydroxide due to the microbial Fe(II) oxidation in oceans earlier than 1.9 billion years substantially sequestrated phosphate, and whether this process significantly limited the primary productivity of the early biosphere. In this study, we report apatite radial flowers of a few micrometers in the 2728 million-year-old Abitibi banded iron formation and the 2460 million-year-old Kuruman banded iron formation and their similarities to those in the 535 million-year-old Lower Cambrian phosphorite. The lithology of the 535 Million-year-old phosphorite as a biosignature bears abundant biomarkers that reveal the possible similar biogeochemical cycling of phosphorus in the Later Archean and Palaeoproterozoic oceans. These apatite radial flowers represent the primary precipitation of phosphate derived from the phytoplankton blooms in the euphotic zones of Neoarchean and Palaoeproterozoic oceans. The unbiased distributions of the apatite radial flowers within sub-millimeter bands do not support the idea of an Archean Crisis of Phosphate. This is the first report of the microbial mediated mineralization of phosphorus before the Great Oxidation Event when the whole biosphere was still dominated by anaerobic microorganisms.

Stratigraphy, age, and depositional setting of the Miocene Barstow Formation at Harvard Hill, central Mojave Desert, California

Science.gov (United States)

Leslie, Shannon R.; Miller, David M.; Wooden, Joseph L.; Vazquez, Jorge A.

2010-01-01

New detailed geologic mapping and geochronology of the Barstow Formation at Harvard Hill, 30 km east of Barstow, CA, help to constrain Miocene paleogeography and tectonics of the central Mojave Desert. A northern strand of the Quaternary ENE-striking, sinistral Manix fault divides the Barstow Formation at Harvard Hill into two distinct lithologic assemblages. Strata north of the fault consist of: a green rhyolitic tuff, informally named the Shamrock tuff; lacustrine sandstone; partially silicified thin-bedded to massive limestone; and alluvial sandstone to pebble conglomerate. Strata south of the fault consist of: lacustrine siltstone and sandstone; a rhyolitic tuff dated at 19.1 Ma (U-Pb); rock-avalanche breccia deposits; partially silicified well-bedded to massive limestone; and alluvial sandstone and conglomerate. Our U-Pb zircon dating of the Shamrock tuff by SHRIMP-RG yields a peak probability age of 18.7 ± 0.1 Ma. Distinctive outcrop characteristics, mineralogy, remanent magnetization, and zircon geochemistry (Th/U) suggest that the Shamrock tuff represents a lacustrine facies of the regionally extensive Peach Spring Tuff (PST). Here we compare zircon age and geochemical analyses from the Shamrock tuff with those of the PST at Stoddard Wash and provide new insight into the age of zircon crystallization in the PST rhyolite. Results of our field studies show that Miocene strata at Harvard Hill mostly accumulated in a lacustrine environment, although depositional environments varied from a relatively deep lake to a very shallow lake or even onshore setting. Rock-avalanche breccias and alluvial deposits near the base of the exposed section indicate proximity to a steep basin margin and detrital studies suggest a southern source for coarse-grained deposits; therefore, we may infer a southern basin-margin setting at Harvard Hill during the early Miocene. Our geochronology demonstrates that deposition of the Barstow Formation at Harvard Hill extended from before

Multispectral Thermal Imagery and Its Application to the Geologic Mapping of the Koobi Fora Formation, Northwestern Kenya

Energy Technology Data Exchange (ETDEWEB)

Green, Mary K. [Univ. of New Mexico, Albuquerque, NM (United States)

2005-12-01

The Koobi Fora Formation in northwestern Kenya has yielded more hominin fossils dated between 2.1 and 1.2 Ma than any other location on Earth. This research was undertaken to discover the spectral signatures of a portion of the Koobi Fora Formation using imagery from the DOE's Multispectral Thermal Imager (MTI) satellite. Creation of a digital geologic map from MTI imagery was a secondary goal of this research. MTI is unique amongst multispectral satellites in that it co-collects data from 15 spectral bands ranging from the visible to the thermal infrared with a ground sample distance of 5 meters per pixel in the visible and 20 meters in the infrared. The map was created in two stages. The first was to correct the base MTI image using spatial accuracy assessment points collected in the field. The second was to mosaic various MTI images together to create the final Koobi Fora map. Absolute spatial accuracy of the final map product is 73 meters. The geologic classification of the Koobi Fora MTI map also took place in two stages. The field work stage involved location of outcrops of different lithologies within the Koobi Fora Formation. Field descriptions of these outcrops were made and their locations recorded. During the second stage, a linear spectral unmixing algorithm was applied to the MTI mosaic. In order to train the linear spectra unmixing algorithm, regions of interest representing four different classes of geologic material (tuff, alluvium, carbonate, and basalt), as well as a vegetation class were defined within the MTI mosaic. The regions of interest were based upon the aforementioned field data as well as overlays of geologic maps from the 1976 Iowa State mapping project. Pure spectra were generated for each class from the regions of interest, and then the unmixing algorithm classified each pixel according to relative percentage of classes found within the pixel based upon the pure spectra values. A total of four unique combinations of geologic

Preliminary view of geotechnical properties of soft rocks of Semanggol formation at Pokok Sena, Kedah

Science.gov (United States)

Ahmad, N. R.; Jamin, N. H.

2018-04-01

The research was inspired by series of geological studies on Semanggol formation found exposed at North Perak, South Kedah and North Kedah. The chert unit comprised interbedded chert-shale rocks are the main lithologies sampled in a small-scale outcrop of Pokok Sena area. Black shale materials were also observed associated with these sedimentary rocks. The well-known characteristics of shale that may swell when absorb water and leave shrinkage when dried make the formation weaker when load is applied on it. The presence of organic materials may worsen the condition apart from the other factors such as the history of geological processes and depositional environment. Thus, this research is important to find the preliminary relations of the geotechnical properties of soft rocks and the geological reasoning behind it. Series of basic soil tests and 1-D compression tests were carried out to obtain the soil parameters. The results obtained gave some preliminary insight to mechanical behaviour of these two samples. The black shale and weathered interbedded chert-shale were classified as sandy-clayey-SILT and clayey-silty-SAND respectively. The range of specific gravity of black shale and interbedded chert/shale 2.3 – 2.6 and fall in the common range of shale and chert specific gravity value. In terms of degree of plasticity, the interbedded chert/shale samples exhibit higher plastic degree compared to the black shale samples. Results from oedometer tests showed that black shale samples had higher overburden pressure (Pc) throughout its lifetime compare to weathered interbedded chert-shale, however the compression index (Cc) of black shale were 0.15 – 0.185 which was higher than that found in interbedded chert-shale. The geotechnical properties of these two samples were explained in correlation with their provenance and their history of geological processes involved which predominantly dictated the mechanical behaviour of these two samples.

Petrography and geochemistry of the Dales Gorge banded iron formation: Paragenetic sequence, source and implications for palaeo-ocean chemistry

DEFF Research Database (Denmark)

Pecoits, E.; Gingras, M. K.; Barley, M. E.

2009-01-01

provenance. Nonetheless, when all the lithologies (i.e., source rocks, S and BIF macrobands) are evaluated together, continuous geochemical trends can be observed. This suggests that at least part of the precursor material of BIF macrobands was sourced from the same material that gave origin to the S...

College in Paradise! (Paradise Valley Shopping Mall).

Science.gov (United States)

Schoolland, Lucile B.

Rio Salado Community College (RSCC), a non-campus college within the Maricopa Community College District, offers hundreds of day, late afternoon, and evening classes at locations throughout the county. The Paradise Valley community had always participated heavily in the evening classes offered by RSCC at local high schools. In fall 1982, an effort…

Paleomagnetic and oxygen isotopic evidence for long term diagenesis in radiolarian chert, Pindos Mountains, Greece

Science.gov (United States)

Baltuck, Miriam

1987-02-01

Paleomagnetics was used in an attempt to improve chronostratigraphy in the Middle and Upper Jurassic radiolarian chert and siliceous mudstone of the Pindos Zone, Greece. Remanent magnetism studies showed strong magnetic intensity but scattered orientation. Orientation of some pressure solution features in the radiolarities indicates their formation under horizontal pressure, a condition which in Pindos geologic history would only have occurred during early Cretaceous or Cenozoic tectonics, indicating very late diagenesis in these parts of the section. From time of deposition to later time at which diagenesis can be documented, the Earth's magnetic field would have reversed many times. Remagnetization during solution-precipitation steps of silica diagenesis could complicate the rock magnetics. Oxygen isotopic and major element analyses of radiolarite lithologies show a systematic variation of rate of silica diagenesis in different host lithologies, thus solution-precipitation would occur at widely differing times throughout the section lithologies. If the dissolution of the silica cement were physically to free magnetic material from an earlier orientation, the result could be a partial shift toward alignment with the ambient magnetic field. Alternatively, complete reorientation of particles could have occurred at varying times in different parts of the section as a function of host lithology. During the northward movement and clockwise rotation of the Apulian subplate (including Pindos) these different lithologies could completely reorient during different stages of silica diagenesis, locking the orientation of iron magnetic moments into alignment with the ambient magnetic field at time of precipitation to result in a strong intensity but scattered orientation of Pindos rock magnetics.

Formate Formation and Formate Conversion in Biological Fuels Production

Directory of Open Access Journals (Sweden)

Bryan R. Crable

2011-01-01

Full Text Available Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the methanogenic breakdown of complex organic material and serves as an important precursor for biological fuels production in the form of methane, hydrogen, and potentially methanol. Formate is produced by either CoA-dependent cleavage of pyruvate or enzymatic reduction of CO2 in an NADH- or ferredoxin-dependent manner. Formate is consumed through oxidation to CO2 and H2 or can be further reduced via the Wood-Ljungdahl pathway for carbon fixation or industrially for the production of methanol. Here, we review the enzymes involved in the interconversion of formate and discuss potential applications for biofuels production.

Geological map of Uruguay Esc 1,100,000. Carmelo Sheet P-24

International Nuclear Information System (INIS)

Ferrando, L; Eugui, W; Cabrera, Z; Elias, R

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Carmelo) and the explanatory memoranda which describes the geological , lithological and sedimentological characteristics soils of the precambrian period in the Mercedes , Fray Bentos, Libertad and Raigon formations. The Precambrian rocks are found in large quarries in Carmelo hill

Geological map of Uruguay Esc 1,100,000. Algorta Sheet N-16

International Nuclear Information System (INIS)

Ford, I; Gancio, F

1990-01-01

This work is about the geological map of Uruguay Esc.1.100.000 (Algorta) and the explanatory memoranda which describes the geological , lithological and sedimentological soil characteristics of the upper cretaceous in Guichon, Mercedes and Asencio formaltions as well as the lower tertiary period of Palmitas and Fray Bentos formations

The influence of tropical cyclones in gully formation: A case study from Madagascar

Science.gov (United States)

Raveloson, Andrea; Szabó, Amanda; Székely, Balázs

2017-04-01

Soil erosion has been recognized as the main cause of land degradation worldwide and gully erosion is currently considered as one of the most striking erosion type. Madagascar is one of the most affected country with special gullies called lavakas. Despite of the several decade long research, the reasons and the mechanism of their formation are still unknown. Anthropogenic factors, specific combination of lithology, weathering profile and topography are most often stated but numerous publications mention climate as a main factor. We studied the role of climatic conditions and tropical cyclones since 2014. This study aims to analyze lavaka distribution with GIS methods and to find relation between lavaka density, lavaka density change and climatic conditions. Lavakas have been identified in 17 selected study sites by visual recognition using satellite images from years 2000-2009 and 2003-2008. A total of 1330 km2 has been processed at 1 km x 1 km grid cell scale. The total number of recognized lavakas was 1592 in the 17 sites that corresponds to a varying lavaka density of 0 and 8.53 km-2. Data show that the appearance of lavakas is related to the spatial distribution and the inter-annual variability of precipitation and this connection is further strengthened by the tropical cyclones. Furthermore, among our 17 study sites changes in lavaka density were observed between 2000-2009 and 2003-2008 only in areas frequently hit by cyclones in the last 20 years.

Deep Recycling of Sedimentary Lithologies in Subduction Zones: Geochemical and Physical Constraints from Phase Equilibria and Synchrotron-Based Multi-Anvil Experiments at 15-25 GPa

Science.gov (United States)

Rapp, R. P.; Nishiyama, N.; Irifune, T.; Inoue, T.; Yamasaki, D.

2003-12-01

Ocean island basalts (OIBs) provide geochemical evidence for the presence of crustally-derived sedimentary material in the deep mantle plume source region for EM-type OIBs, and global seismic tomography provides us with dramatic images of subducted slabs, presumably carrying a sediment component, penetrating through the transition zone and into the lower mantle, in some cases to the core-mantle boundary. In an effort to better constrain the geochemical effects of deeply recycled sedimentary material in subduction zones, and their role in the petrogenesis of EM-type OIBs, we have undertaken a series of phase equlibria experiments in the multi-anvil apparatus at 10-25 GPa, using natural sediment lithologies as starting materials. The goal of these experiments is to identify the dominant phases in deeply subducted sediments, constrain their P-T stability limits, and to assess their role in crustal recycling and element redistribution in the deep mantle during subduction. The phase equilibria experiments were performed in a 2000-ton Kawai-type apparatus, using tungsten carbide cubes with 3 mm TEL and Cr-doped MgO and zirconia pressure media. A cylindrical lanthanum chromite heater was used, along with short (gold capsules to minimize thermal gradients and to retain the small amounts of water (< 1 wt%) present in the starting material, and long run-durations (12-48 hours) in order to facilitate future analyses of the dominant phases for key trace elements using the ion microprobe. Our preliminary results at 10-25 GPa indicate that K-hollandite (KalSi3O3) and stishovite are the primary high-pressure phases in the sediment composition, with subordinate garnet and an as-yet-unidentified (possibly hydrous) Al-silicate phase present as well. These results suggest that K-hollandite is the primary repository for incompatible elements (e.g., La, Ce, Sr, Ba, Rb, etc., and the heat-producing elements K, U and Th) in sedimentary material recycled into the deep mantle via

The Petäjäskoski Formation, a new lithostratigraphic unit in the Paleoproterozoic Peräpohja Belt, northern Finland

Directory of Open Access Journals (Sweden)

Markus Kyläkoski

2012-12-01

Full Text Available This paper gives the first description of a newly-recognized, basin-wide metasedimentary unit in the Paleoproterozoic (~2.4–1.9 Ga Peräpohja Belt, northern Finland. The unit, which is named the Petäjäskoski Formation (PFm after the single location where the rocks are known to be exposed, is situated stratigraphically in the middle part of the Kivalo Group between the quartzites of the>2.22 Ga Palokivalo Formation and the mafic volcanic rocks of the ~2.1 Ga Jouttiaapa Formation.The bulk of the PFm comprises phlogopitic-sericitic and albitic schists with abundant hematite as a diagnostic feature. Quartzite and dolomite interbeds are common. Based on drillcore and geophysical data, the succession is several hundreds of meters thick. The unit has prograde, chiefly lower greenschist facies mineral assemblages and, though being commonly intensely deformed, shows well-preserved sedimentary structures that imply deposition in shallow-water tosubaerial environments. Based on the original lithological features, the Petäjäskoski Formation can be defined as a claystone-siltstone-sandstone-dolostone association. On the geochemical and stratigraphic basis, the albite schists likely represent albitized equivalents of the micaceous claystones and siltstones. They are intercalated with stratabound collapse breccias, up to tens of meters in thickness, with clasts composed mainly of bordering albite schist. A mafic sill intruding the Petäjäskoski Formation yielded a U-Pb zircon age of 2140 ± 11 Ma. The older, c. 2220 Ma, differentiated sills are not known to reach the stratigraphic level of thePetäjäskoski Formation and hence, the depositional age of the PFm sediments can be bracketed between c. 2220 and 2140 Ma. Detrital zircon grains dated from a quartzitic sample from the PFmshow an Archean (c. 2650–3470 Ma provenance.The moderate to high MgO (~6–13 wt.%, K2O (~3–8 wt.% and FeOtot(8–15 wt.% contents, low CaO and Na2O contents, and abundant

Integration of spectral, spatial and morphometric data into lithological mapping: A comparison of different Machine Learning Algorithms in the Kurdistan Region, NE Iraq

Science.gov (United States)

Othman, Arsalan A.; Gloaguen, Richard

2017-09-01

Lithological mapping in mountainous regions is often impeded by limited accessibility due to relief. This study aims to evaluate (1) the performance of different supervised classification approaches using remote sensing data and (2) the use of additional information such as geomorphology. We exemplify the methodology in the Bardi-Zard area in NE Iraq, a part of the Zagros Fold - Thrust Belt, known for its chromite deposits. We highlighted the improvement of remote sensing geological classification by integrating geomorphic features and spatial information in the classification scheme. We performed a Maximum Likelihood (ML) classification method besides two Machine Learning Algorithms (MLA): Support Vector Machine (SVM) and Random Forest (RF) to allow the joint use of geomorphic features, Band Ratio (BR), Principal Component Analysis (PCA), spatial information (spatial coordinates) and multispectral data of the Advanced Space-borne Thermal Emission and Reflection radiometer (ASTER) satellite. The RF algorithm showed reliable results and discriminated serpentinite, talus and terrace deposits, red argillites with conglomerates and limestone, limy conglomerates and limestone conglomerates, tuffites interbedded with basic lavas, limestone and Metamorphosed limestone and reddish green shales. The best overall accuracy (∼80%) was achieved by Random Forest (RF) algorithms in the majority of the sixteen tested combination datasets.

Procedures for use of, and drill cores and cuttings available for study at, the Lithologic Core Storage Library, Idaho National Engineering Laboratory, Idaho

International Nuclear Information System (INIS)

Davis, L.C.; Hannula, S.R.; Bowers, B.

1997-03-01

In 1990, the US Geological Survey, in cooperation with the US Department of Energy, Idaho Operations Office, established the Lithologic Core Storage Library at the Idaho National Engineering Laboratory (INEL). The facility was established to consolidate, catalog, and permanently store nonradioactive drill cores and cuttings from investigations of the subsurface conducted at the INEL, and to provide a location for researchers to examine, sample, and test these materials. The facility is open by appointment to researchers for examination, sampling, and testing of cores and cuttings. This report describes the facility and cores and cuttings stored at the facility. Descriptions of cores and cuttings include the well names, well locations, and depth intervals available. Most cores and cuttings stored at the facility were drilled at or near the INEL, on the eastern Snake River Plain; however, two cores drilled on the western Snake River Plain are stored for comparative studies. Basalt, rhyolite, sedimentary interbeds, and surficial sediments compose the majority of cores and cuttings, most of which are continuous from land surface to their total depth. The deepest core stored at the facility was drilled to 5,000 feet below land surface. This report describes procedures and researchers' responsibilities for access to the facility, and examination, sampling, and return of materials

Miocene

Indian Academy of Sciences (India)

(Malvaceae s.l.), is described from the Sindhudurg Formation. (Miocene) at the ... described along with palynofossils (Phadtare and. Kulkarni 1980a ... D istrict,. Maharash tra,. India, star indicates fossil lo cality; and. ( b. ) litholog o f the. Kalviw adi .... Following collision of the two plates, land connections ... The occur- rence of ...

Galaxy formation

International Nuclear Information System (INIS)

Silk, J.; Di Cintio, A.; Dvorkin, I.

2014-01-01

Galaxy formation is at the forefront of observation and theory in cosmology. An improved understanding is essential for improving our knowledge both of the cosmological parameters, of the contents of the universe, and of our origins. In these lectures intended for graduate students, galaxy formation theory is reviewed and confronted with recent observational issues. In lecture 1, the following topics are presented: star formation considerations, including IMF, star formation efficiency and star formation rate, the origin of the galaxy luminosity function, and feedback in dwarf galaxies. In lecture 2, we describe formation of disks and massive spheroids, including the growth of supermassive black holes, negative feedback in spheroids, the AGN-star formation connection, star formation rates at high redshift and the baryon fraction in galaxies.

Hydrocarbon migration and accumulation in the Upper Cretaceous Qingshankou Formation, Changling Sag, southern Songliao Basin: Insights from integrated analyses of fluid inclusion, oil source correlation and basin modelling

Science.gov (United States)

Dong, Tian; He, Sheng; Wang, Dexi; Hou, Yuguang

2014-08-01

The Upper Cretaceous Qingshankou Formation acts as both the source and reservoir sequence in the Changling Sag, situated in the southern end of the Songliao Basin, northeast China. An integrated approach involving determination of hydrocarbon charging history, oil source correlation and hydrocarbon generation dynamic modeling was used to investigate hydrocarbon migration processes and further predict the favorable targets of hydrocarbon accumulations in the Qingshankou Formation. The hydrocarbon generation and charge history was investigated using fluid inclusion analysis, in combination with stratigraphic burial and thermal modeling. The source rocks began to generate hydrocarbons at around 82 Ma and the hydrocarbon charge event occurred from approximately 78 Ma to the end of Cretaceous (65.5 Ma) when a large tectonic uplift took place. Correlation of stable carbon isotopes of oils and extracts of source rocks indicates that oil was generated mainly from the first member of Qingshankou Formation (K2qn1), suggesting that hydrocarbon may have migrated vertically. Three dimensional (3D) petroleum system modeling was used to evaluate the processes of secondary hydrocarbon migration in the Qingshankou Formation since the latest Cretaceous. During the Late Cretaceous, hydrocarbon, mainly originated from the Qianan depression, migrated laterally to adjacent structural highs. Subsequent tectonic inversion, defined as the late Yanshan Orogeny, significantly changed hydrocarbon migration patterns, probably causing redistribution of primary hydrocarbon reservoirs. In the Tertiary, the Heidimiao depression was buried much deeper than the Qianan depression and became the main source kitchen. Hydrocarbon migration was primarily controlled by fluid potential and generally migrated from relatively high potential areas to low potential areas. Structural highs and lithologic transitions are potential traps for current oil and gas exploration. Finally, several preferred hydrocarbon

40 CFR Appendix A to Part 194 - Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal...

Science.gov (United States)

2010-07-01

... Department shall use Salado mass concrete (consistent with that proposed for the shaft seal system, and as described in Appendix SEAL of Docket A-93-02, Item II-G-1) instead of fresh water concrete. Condition 2... shall implement the panel seal design designated as Option D in Docket A-93-02, Item II-G-1 (October 29...

Continents as lithological icebergs: The importance of buoyant lithospheric roots

Science.gov (United States)

Abbott, D.H.; Drury, R.; Mooney, W.D.

1997-01-01

An understanding of the formation of new continental crust provides an important guide to locating the oldest terrestrial rocks and minerals. We evaluated the crustal thicknesses of the thinnest stable continental crust and of an unsubductable oceanic plateau and used the resulting data to estimate the amount of mantle melting which produces permanent continental crust. The lithospheric mantle is sufficiently depleted to produce permanent buoyancy (i.e., the crust is unsubductable) at crustal thicknesses greater than 25-27 km. These unsubductable oceanic plateaus and hotspot island chains are important sources of new continental crust. The newest continental crust (e.g., the Ontong Java plateau) has a basaltic composition, not a granitic one. The observed structure and geochemistry of continents are the result of convergent margin magmatism and metamorphism which modify the nascent basaltic crust into a lowermost basaltic layer overlain by a more silicic upper crust. The definition of a continent should imply only that the lithosphere is unsubductable over ??? 0.25 Ga time periods. Therefore, the search for the oldest crustal rocks should include rocks from lower to mid-crustal levels.

The Shublik Formation and adjacent strata in northeastern Alaska description, minor elements, depositional environments and diagenesis

Science.gov (United States)

Tourtelot, Harry Allison; Tailleur, Irvin L.

1971-01-01

The Shublik Formation (Middle and Late Triassic) is widespread in the surface and subsurface of northern Alaska. Four stratigraphic sections along about 70 miles of the front of the northeastern Brooks Range east of the Canning giver were examined and sampled in detail in 1968. These sections and six-step spectrographic and carbon analyses of the samples combined with other data to provide a preliminary local description of the highly organic unit and of the paleoenvironments. Thicknesses measured between the overlying Kingak Shale of Jurassic age and the underlying Sadlerochit Formation of Permian and Triassic age range from 400 to more than 800 feet but the 400 feet, obtained from the most completely exposed section, may be closer to the real thickness across the region. The sections consist of organic-rich, phosphatic, and fossiliferous muddy, silty, or carbonate rocks. The general sequence consists, from the bottom up, of a lower unit of phosphatic siltstone, a middle unit of phosphatic carbonate rocks, and an upper unit of shale and carbonate rocks near the Canning River and shale, carbonate rocks, and sandstone to the east. Although previously designated a basal member of the Kingak Shale (Jurassic), the upper unit is here included with the Shublik on the basis of its regional lithologic relation. The minor element compositions of the samples of the Shublik Formation are consistent with their carbonaceous and phosphatic natures in that relatively large amounts of copper, molybdenum, nickel, vanadium and rare earths are present. The predominantly sandy rocks of the underlying Sadlerochit Formation (Permian and Triassic) have low contents of most minor elements. The compositions of samples of Kingak Shale have a wide range not readily explicable by the nature of the rock: an efflorescent sulfate salt contains 1,500 ppm nickel and 1,500 ppm zinc and large amounts of other metals derived from weathering of pyrite and leaching of local shale. The only recorded

Melting mode and source lithology inferred from trace element systematic in historical olivine from Lanzarote, Canary Islands

Science.gov (United States)

Gómez-Ulla, Alejandra; Sigmarsson, Olgeir; Guðfinnsson, Guðmundur H.

2017-04-01

Trace element concentrations and ratios in olivine phenocrysts, such as fractionation-corrected Ni x (FeO/MgO) and Fe/Mn, have been shown useful as probes of pyroxenite derived component in mixtures of primary mantle melts (e.g. Sobolev et al., 2007). For instance, higher Ni and lower Mn and Ca contents are expected in partial melts of pyroxenite compared to those of lherzolite. We have measured trace element concentrations in olivine from 1730-1736 AD (Timanfaya) and 1824 AD eruptions in Lanzarote (Canary Islands), which erupted mafic and mantle nodule bearing magmas, ranging in composition from highly silica-undersaturated basanite through alkali basalt to tholeiite. The early basanite exhibit the largest olivine trace element variation covering the range of those from MORB and OIB worldwide, whereas later erupted tholeiite have values typical from pyroxenite derived melts. The Fo value decreased systematically with time during the 1730-36 eruption and the proportion of silica-saturated primary melt increased in the parental magma mixture with time. At the end of the eruption, tholeiite magmas crystallized olivine with, increasing concentrations of Mn and Ca and higher Ca/Al at relatively uniform Ni x (FeO/MgO) and Fe/Mn, all of which is readily explained by increased decompression melting at lower temperature. The basanite from the eruption that took place in 1824 AD has olivine with even higher Fo value and trace element variability similar those of the Timanfaya basanite. The fact that the Lanzarote basanite contain olivine with trace element systematic spanning that of MORB and pyroxenite melt can be explained by CO2-flux melting of a lithologically heterogeneous source, generating the diverse compositions. Initial reactive porous flow through depleted oceanic lithosphere and equilibration with dunitic restite of percolating pyroxenite melt may have amplified the observed Ni depletion in olivine of the earliest basanite. The fact that olivine compositions and

Pliocene-Lower Pleistocene shallow-water mixed siliciclastics and carbonates (Yanigua and Los Haitises formations) in eastern Hispaniola (Dominican Republic)

Science.gov (United States)

Braga, Juan C.; Díaz de Neira, Alberto; Lasseur, Eric; Mediato, José; Aguirre, Julio; Abad, Manuel; Hernaiz-Huerta, Pedro P.; Monthel, Jacques; Pérez-Valera, Fernando; Lopera, Eusebio

2012-07-01

The virtually unfolded sedimentary cover of the Cordilleras Central and Oriental in the eastern Dominican Republic (eastern Hispaniola, tropical North Atlantic) largely consists of Pliocene to Early Pleistocene mixed siliciclastics and carbonates. These deposits have been grouped into two laterally interfingering mapping units, the Yanigua and Los Haitises formations. The former (mainly siliciclastics) comprises marl, marly limestone, and minor conglomerate, sandstone, lignite, and carbonaceous clay and crops out closest to the basement. The Los Haitises Formation mainly consists of limestone and intercalating beds of marly limestone and marl. Lithological mapping at the 1:50,000 scale and facies analysis of twelve measured sections and of additional fourteen outcrops suggest that these deposits mainly formed on a shallow-water marine platform fringing the precursor reliefs of the Cordillera Oriental and the southeastern end of the Cordillera Central. Only a limited proportion of sediment formed in floodplains and marshes. Marl and marly limestone dominated the inner platform sediments. Terrigenous mud decreased away from the emergent basement and carbonate sedimentation dominated the more external platform. Corals, molluscs, echinoids, foraminifers, bryozoans, coralline algae, and Halimeda are the main components with varying amounts of carbonate mud. The platform was generally a low-energy environment with seagrass patches. In the inner platform, corals grew as isolated colonies or as small patch reefs dominated by Porites in marly and bioclastic substrates. Branching corals (Stylophora and Acropora) grew in extensive carpets in more distal areas. At least in the last stage of its development (Early Pleistocene), the platform was rimmed by a reef barrier similar to the Holocene Caribbean barrier reefs, with Acropora gr. palmata, A. cervicornis, Porites, Montastrea, Siderastrea, and Diploria as the main reef builders.