WorldWideScience

Sample records for saibai ni okeru

  1. Results of cultivation experiment at clean farm (vegetable plant). 1. Clean farm (yasai kojo) ni okeru saibai jikken kekka. 1

    Energy Technology Data Exchange (ETDEWEB)

    Miyaishi, T.; Kawagishi, K.; Matsuzaki, O.; Nakahara, M. (Kyushu Electric Power Co. Ltd., Fukuoka (Japan))

    1991-03-31

    This paper reports a summary of the facilities in an experimental plant constructed by the Kyushu Electric Power Company in 1988, and a result of experiments on cultivating salad and lettuce. The plant has environmentally controlled cultivating rooms of solar beam combined type and totally artificial light type, each having a floor area of 50 m {sup 2}, disposed with cultivating stages divided into three divisions of seedling culture, growth, and forced culture, nutritious liguid feeding devices of circulation type, and air conditioning equipment. The paper describes results of the tests aimed at realizing an increase in yield and profit, an optimum cultivating system, and economic facilities at the vegetable plant. Included in the tests are that (a) four kinds of salads and five kinds lettuce were selected for cultivation to decide most suitable kinds, based on literature survey and preliminary experiments; (b) varying the environmental conditions for the culture, such as temperature, radiating condition, concentration of the nutritious liquid, and concentration of carbon dioxide, conditions optimum or suitable for the plant growth were selected; (c) the plant was compared with glass green houses with respect to the required cultivating period of time, vitamin C content and color tones of the products; (d) the solar beam combined type room and the totally artificial light rooms were compared with respect to power consumption and heat capacity that passes through the cultivation room walls, and the latter was concluded being superior in economics and stability. 12 refs., 37 figs., 30 tabs.

  2. Improvement of magnetic properties of Fe-50mass%Ni in MIM process; MIM process ni okeru Fe-50mass%Ni no jiki tokusei kaizen

    Energy Technology Data Exchange (ETDEWEB)

    Miura, H. [Kumamoto University, Kumamoto (Japan). Faculty of Engineering; Fujita, S. [Kumamoto University, Kumamoto (Japan); Fujita, M.; Ninomiya, R. [Mitsuikinzoku Co. Ltd., Tokyo (Japan)

    2000-12-15

    Metal injection molding (MIM) process is hoped to be one of processing for required to more complicated parts of magnetic components. In this study, the effect of different types of powders (prealloyed and mixed elemental powders) on the magnetic properties of permalloy (Fe-50mass%Ni) through the MIM technique was investigated. Approximately 94% of theoretical density was obtained by using the prealloyed powder, and the retained carbon and oxygen contents were controlled to be low. On the other hand, 96% of theoretical density was obtained by using the mixed elemental powder, but the magnetic properties were inferior to that of prealloyed powder's because of high retained oxygen content. By using the carbonyl Fe powder with high carbon, the retained oxygen and carbon content could be controlled to be low, resulting in the improved magnetic properties. (author)

  3. Development of hydroponic system using agriculture waste. 1. Characteristics of rice husk charcoal as growth medium and vegetable growth; Suiko saibai ni okeru haikibutsu riyo gijutsu no kaihatsu. 1. Momigara kutan no baichi to shite no tokucho to yasai no seiiku

    Energy Technology Data Exchange (ETDEWEB)

    Terazoe, H.; Nakaya, K.; Okano, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1994-06-01

    Experimental researches were made on rice husk charcoals processed to be used as culture media for hydroponics. Rice husk charcoals with a size of 1 mm or larger retaining the original shape of the rice husk, and with a size of smaller than 1 mm were made for use in the experiment. In the culture media made of these rice husk charcoals, the charcoal with a particle size greater than 1 mm had more air portion than water portion at 6 cm above the water level, and the charcoal with a particle size smaller than 1 mm had poor air permeability. According to the result of immersing the rice husk charcoal in a culture solution, phosphoric acid ion and manganese in the solution decreased by about 35% and calcium by about 10% in the duration of 120 minutes, as a result of having been adsorbed into the rice husk charcoal. On the other hand, chloride ion increased by about 80% and potassium and iron by about 30%, because of having been dissolved out from the charcoal. In cultivating spinach, butterhead lettuce and radish in the rice husk charcoal culture media, the culture medium with charcoal smaller than 1 mm resulted in harvest reduced by about 75% in spinach, and about 10% in butterhead lettuce. 15 refs., 13 figs., 11 tabs.

  4. Application of plasma spray technique to heavy duty gas turbine. Hatsuden yo gas turbine ni okeru plasma yosha gijutsu no oyo

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Tsuji, I. (Mitsubishi Heavy Industries, Ltd., Tokyo (Japan))

    1990-10-30

    Gas turbines are regarded useful for the effective use of energy resources, and are expected for their high efficiency and improved reliability, especially in the area of power generation. This report introduces an application of the plasma flame coating technology as one of the most advance technology in the production of a gas turbine for power generation of Mitsubishi Heavy Industries. This report describes the following items. Progress diagram for higher performance of Mitsubishi gas turbines. Heat-shielding coating for the burner (top coat being ZrO {sub 2}-24 MgO). Wear-resistant coating (Cr {sub 3} C {sub 2}-25 NiCr). Cross sectional micro-structure of high temperature corrosion resistant coating (CoNiCrAlY). Application of low pressure plasma flame coating. Turbine blade TBC (Fender coat CoNiCrAlY, top coat ZrO {sub 2}-8Y {sub 2} O {sub 3}). Effect of TBC application to the parent material strength. TBC application to the static blade of the turbine. 10 figs.

  5. Application of new analytical techniques to the order-disorder transformation in Ni-Mo alloys; Ni-Mo gokin no kisoku-fukisoku hentai ni okeru atarashii kozo kaiseki no kokoromi

    Energy Technology Data Exchange (ETDEWEB)

    Oki, K.; Hata, S.; Kuwano, N. [Kyushu University, Fukuoka (Japan)

    1997-09-20

    This paper presents the analytical example of the ordering process of order-disorder transformation in Ni-Mo alloy using recent experimental techniques. Monte Carlo simulation clarified the fact that the ordering process in Ni4-Mo alloy is largely affected by short range interaction in the early stage of ordering, and forms D1a, D022 and Pt2Mo structure units with a similar atomic pair correlation. The ordering process is largely affected by long range interaction with an advance of ordering, and develops only D1a structure most stable in energy. In order to check the existence of SRO (short range order) structure obtained by Monte Carlo simulation, the analysis of high-resolution TEM images under SRO condition was carried out using the imaging plate recently developed for TEM. The analytical result showed that the observed N2M3 pattern is derived from not always the existence of N2M3 structure but superimposition of D1a, D022 and Pt2Mo structure units. 19 refs., 4 figs.

  6. Effects of solvent and catalysts on the hydrogenolysis of alkylnaphthalenes; Alkylnaphthalene no suisoka bunkai ni okeru yobai to shokubai no koka

    Energy Technology Data Exchange (ETDEWEB)

    Futamura, S. [National Institute for Resources and Environment, Tsukuba (Japan)

    1996-10-28

    Catalytic effects of metal and carbon materials, which promote hydrogen transfer from hydrogen donor solvents, are investigated during hydrogenolysis of benzyl-1-methylnaphthalenes (BMN) selected as a hydrogen acceptor. For the isomer distribution of BMN after the reaction, almost the same molecular ratio before the reaction was obtained independent of the presence of catalysts. Selectivity of position during the addition of hydrogen atoms from tetralin was not found. For the reaction of BMN in tetralin, 1-methylnaphthalene and toluene were obtained as products, but the formation of benzylnaphthalene was not found. As for the nuclear hydride of BMN, the trace amount formation was confirmed by gas chromatography. For the hydrogen transfer from tetralin progressed catalytically, it was found that the nuclear of naphthalene can not be hydrogenated easily. This was considered to be due to the obstruction of hydrogen transfer from tetralin by the strong adsorption of BMN on the Ni surface. 1 ref., 1 fig., 2 tabs.

  7. Characterization of the various catalyst for solvent hydrogenation at 1t/d PSU; 1t/d PSU ni okeru kakushu yozai suisoka shokubai no seino hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Kakebayashi, H.; Nogami, Y.; Inokuchi, K. [Mitsui SRC Development Co. Ltd., Tokyo (Japan); Aihara, Y.; Imada, K. [Nippon Steel Corp., Tokyo (Japan)

    1996-10-28

    Performance of various catalysts for hydrogenation of recycle solvent was evaluated for the operation of NEDOL process 1 t/d process supporting unit (PSU). Distillate between 220 and 538{degree}C derived from the liquefaction of Tanito Harum coal was used as recycle solvent. Deactivation behaviors of catalysts were compared using a prediction equation of catalyst life, by which aromatic carbon index (fa) after hydrogenation can be determined from the fa of recycle oil before hydrogenation, reaction temperature, and total hydrogenation time. Total hydrogenation time satisfying the {Delta}fa, 0.05 before and after hydrogenation were 8,000, 4,000, and 2,000 hours for NiMo-based catalysts C, A, and B, respectively. Catalyst C showed the longest life. Used catalysts were also characterized. The catalyst C showed larger mean pore size than those of the others, which resulted in the longer life due to the delay of pore blockage. From measurements by XPS and EPMA, relative atomic concentration of carbon increased remarkably after the use for all of catalysts, which was considered to be due to the adhesion of hydrocarbons. Increase of metal atoms, such as Fe and Cr, was also observed due to the contamination of entrainment residues. Deactivation of catalysts was caused by the adhesion of hydrocarbons, and metallic compounds, such as Fe and Cr. 3 refs., 1 fig., 5 tabs.

  8. Research on application of heat pump on cyclamen culture. Shikuramen saibai eno heat pump tekiyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nada, Hidetoshi (Kyushu Electric Power Co., Inc., Fukuoka (Japan))

    1989-03-30

    The culture test by introduction of heat pump was conducted for the culture process of cyclamen. As the result of the test, cultivating technology which was capable to deliver cyclamen twice a year, in September and December, together with the reliable technology to cultivate it in large pots (No 7, 8 flower pots) to deliver it at the end of year, were established. Disease and outbreak of injurious insects such as wilt and grey mold were capable to be almost prevented by air-conditioning and dehumidifying system, therefore superior quality cyclamen with beautiful flowers was grown. Further, under-bench culture test which has never been examined, was applied to Daimonji-so, then much interest supplemented by its running cost, was attained. Beside the above, the profitability of heat pump was verified, and energy conservation and labor saving were realized by the automation on opening and closing of green house windows and curtains, on starting and stopping of heat pump which was operated in compliance with set temperature, humidity and quantuty of solar radiation. 7 figs., 10 tabs.

  9. Electro magnetic compatibility of rockets; Rocket ni okeru denji tekigosei

    Energy Technology Data Exchange (ETDEWEB)

    Niimi, Y. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1999-06-01

    Outlined herein is electro-magnetic compatibility (EMC), which is of crucial importance for rockets and satellites. It is concerned with interference between electronic devices, resulting from increased quantities of electromagnetic waves. This problem can be solved by keeping conducted emission (CE: emission of noise) or radiated emission (RE: radiated noise) of one component lower than conducted susceptibility (CS: resistance to noise) or radiated susceptibility (RS: ability of preventing malfunction by noise) of another component. The EMC-related standards have been established, base on the above concepts. They fall into two general categories; CISPR- and MIL-centered ones. MIL-STD-461 is one of the basic EMC standards for space craft. The aerospace industry should solve the various EMC-related problems specific to flying bodies, such as limited spaces for on-board devices, diversified types of components, common power sources, combinations of components supplied by different makers and ungrounded devices. The EMC testing unit installed can measure 20 Hz to 18 GHz of radiated noise and 20 Hz to 1 GHz of conducted noise, and works in an electrical field of up to 60 V/m at 14 KHz to 18 GHz. (NEDO)

  10. Effect of massive transformation on formation of acicular structure in austenitic stainless steel weld metal solidified as ferritic single phase. Report 5. Study on solidification and subsequent transformation of Cr-Ni stainless steel weld metals; Feraito tanso de gyokosuru osutenaito kei sutenresu ko yosetsu kinzoku ni okeru ashikyura jo soshiki no keisei ni oyobosu masshibu hentai no eikyo.5. Cr-Ni kei sutenresu ko yosetsu kinzoku no gyoko/hentai ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, H.; Koseki, T.; Okita, S.; Fuji, M. [Nippon Steel Corp., Tokyo (Japan)

    1997-05-05

    The authors clarified that massive transformation occurs at two phase region under To temperature and there is K-S relation between the massive formation phase and base phase using {gamma} stainless steel that solidifies at F mode and forms acicular structure at room temperature structure. There is a possibility of massive transformation in weld metals because the cooling rate below the high temperature To was high even for normal welding process. Thereupon, in this report, whether the massive transformation effects the formation of acicular structure or not was studied as for {gamma} stainless steel weld metal that solidifies at F mode and room temperature structure becomes acicular form of two {delta} and {gamma} phase. As a result, it was clarified that massive transformation occurs at two phase region with temperature below To, and the room temperature structure was acicular form structure irrespective to massive transformation in case of composition with small Cr/Ni ratio even in case of stainless steel that solidifies at F mode. 20 refs., 15 figs., 1 tab.

  11. High-quality cultivation of autumn chrysanthemum in summer by night cooling; Kaki, yakan reibo ni yoru akigiku no kohinshitsu saibai gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Yokomichi, Y.; Egi, I.; Kajiwara, S. [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

    2000-03-24

    Almost all of white chrysanthemums for business are autumn chrysanthemums 'Shuho no chikara'. They are almost year-round cultivated in facilities. 'Shuho no chikara' is excellent in marketability that it is large-flowered, lasts long, and is not deformed in shape even if blown fully. It is a sort that is most demanded among the single-flowered chrysanthemums. Even in future, 'Shuho no chikara' will be treated as a main sort. The quality of this sort deteriorates at high temperature. Therefore, in summer, the sorts of summer and autumn chrysanthemums (e.g., 'Seiun') are cultivated on the coast of the Inland Sea (famous as a chrysanthemum-growing district) in Hiroshima, instead of 'Shuho no chikara'. Night cooling was combined with shading (shading device) for the control test of day length and temperature so as to cultivate high-quality 'Shuho no chikara' on the cost of the Inland Sea in summer. The result showed that high-quality cut flowers can be cultivated if the temperature at night is less than 27 degrees C. (translated by NEDO)

  12. Characteristics of an anechoic chamber; Denpa anshitsu ni okeru tokusei no sokuteirei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ito, S. [Traffic Safety and Nuisance Research Inst., Tokyo (Japan)

    1998-05-01

    An anechoic chamber for immunity test of electronic equipment for automobiles was constructed. This paper describes an outline of this chamber and some measurement results of basic characteristics. For the specification of immunity characteristics for electromagnetic waves, the magnetic field is more than 70 dB in the frequency range between 150 kHz and 30 MHz, and is more than 100 dB in the frequency range between 30 MHz and 10 GHz. The floor has electric wave reflection characteristics equivalent to the road surface so as to measure the radiation electromagnetic field from electronic equipment for automobiles in the future. Proper electric wave absorbers were fixed on the ceiling, walls and floor to satisfy the electromagnetic wave immunity characteristics and the site attenuation characteristics equivalent to the earth. Basic characteristics of this anechoic chamber were measured. Changes of electric field strength distribution were also measured during the irradiation of electromagnetic wave in the presence or absence of automobiles. These characteristics satisfied the design specification. It was found that the electric field strength changes in the presence of automobiles, and that the degree of change depends on the shape of automobile. 10 figs., 5 tabs.

  13. Study on the time-domain electromagnetic responses; TDEM ho ni okeru denji oto ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, K.; Endo, M. [Waseda University, Tokyo (Japan). School of Science and Engineering

    1997-05-27

    With an objective to perform three-dimensional analysis with high accuracy in using the electromagnetic exploration method, characteristics in electromagnetic response were analyzed, and conditions for acquiring necessary data were discussed. The discussion defined a parameter called `response anomaly` which uses response from media to standardize response only from substances with abnormal resistivity. The receivers were located uniformly on the same plane, and the response anomaly was derived from electromagnetic response from each of the three horizontal and vertical components at each receiving point, which was expressed as a contour map. The parameter for the abnormal body was consisted of location and resistivity contrast with media. Discussions using the contour map were given on the response when these factors for the parameter were varied. As a result, it was found that the response anomaly appears in the form that reflects the abnormal body, and the response anomaly of the horizontal component is superior in terms of being large. It was also referred that, as a requirement for the abnormal body which gives larger impact from the electromagnetic response, the abnormal body should have lower resistivity than that in the media, and resistivity contrast with the media should be greater. 2 refs., 7 figs., 1 tab.

  14. Hybrid structure in civil engineering construction.; Doboku bun`ya ni okeru fukugo kozo.

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, S. [Yokohama National Univ. (Japan). Faculty of Engineering

    1995-03-30

    The structure of steel-concrete hybrid structure which is recently attracting attention is outlined quoting some examples. The effects of steel-concrete hybrid structure are classified according to the characteristics. The Normandie Bridge completed in January this year near the mouth of the Seine River in France is a cable stayed bridge with the world largest span, and it has a hybrid structure of ingeniously combined steel and concrete. The Dole Bridge in France is a hybrid bridge with 7 continuous spans having steel corrugated sheets in the web. Hybrid structure has come to be applied to many structures other than the superstructure works of bridges. The substructures of bridges are applied to immersed tunnels, and the usefulness has come to be recognized widely. The features of hybrid structure can contribute well to the reinforcement of existing structures. In addition, adoption of hybrid structure has been studied as the best method for repairing and reinforcing structures damaged by earthquakes. 8 refs., 6 figs., 1 tab.

  15. Consideration on extradosed prestressed concrete road bridge; Dorokyo ni okeru daihenshin PC keburu kyo

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, A.; Honma, A. [Japan Highway Public Corp., Tokyo (Japan)

    1997-03-31

    The details of the investigation on the Odawara Blue Way Bridge for which extradosed type is employed are provided, and a report is made about the situation of the study on the future construction of the 2nd Tomei-Meishin Expressway. The extradosed PC bridge is considered to have intermediate structural characteristics of those of the conventional beam bridge and PC cable stayed bridge, and is expected to be applied to bridges having approximately from 100 to 200m span. The features of the extradosed PC bridge is outlined. Approximately 1/35 beam height on the intermediate support and 1/10 main tower height against the center span are considered to be proper. PC steel products can be used efficiently because stress fluctuation of diagonals and the load sharing rate of the diagonal member are less than those of the PC cable stayed bridge and safety factor similar to that of general internal cable can be adopted. Construction works for the main tower and the diagonal member are easy due to low height of the main tower, and the bridge is advantageous also in the maintenance control because no beam is required. 5 refs., 8 figs., 2 tabs.

  16. Education for hydraulics and pneumatics in Kinki University; Kinki Daigaku ni okeru yukuatsu kyoiku

    Energy Technology Data Exchange (ETDEWEB)

    Aoyama, Y. [Kinki University, Osaka (Japan). Faculty of Science and Engineering

    2000-03-15

    The Department of Mechanical Engineering is the name. One aim is to bring up students high in abilities involving practice and application through teaching them the basics of engineering, designing and drafting, experiments, practice and exercise, etc. Another aim is to rear engineers who are creative enough to shoulder the age of advanced technologies. There is a subject named 'hydraulic and pneumatic engineering.' Related subjects are system control engineering, actuator engineering, robotics, intelligent machine engineering, and fluid machinery. Textbooks are used. No experiment is conducted for the purpose of education. It is hoped that teaching materials will be provided. Researches for graduation and master's theses include studies of cavitation that occurs at throttles in hydraulic equipment. In particular, how it happens and how to suppress it are studied. What is the most important about fluid power technologies is how to excite interest in students' mind. For this purpose, it is mandatory that actual applications be placed before them and they be allow to observe and touch them. Since classroom explanation alone is of course limited in terms of effect, it is necessary to cover such shortage using exercise, experiment, study tours and temporary training outside the university, etc., which are to be conducted in parallel with classroom lectures. It is desired that business corporations will help embody an internship system. (NEDO)

  17. Volatiles production from the coking of coal; Sekitan no netsubunkai ni okeru kihatsubun seisei

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, Y.; Saito, H.; Inaba, A. [National Institute for Resources and Environment, Tsukuba (Japan)

    1996-10-28

    In order to simplify the coke manufacturing process, a coke production mechanism in coal pyrolysis was discussed. Australian bituminous coal which can produce good coke was used for the discussion. At a temperature raising rate of 50{degree}C per minute, coal weight loss increases monotonously. However, in the case of 3{degree}C, the weight loss reaches a peak at a maximum ultimate temperature of about 550{degree}C. The reaction mechanism varies with the temperature raising rates, and in the case of 50{degree}C per minute, volatiles other than CO2 and propane increased. Weight loss of coal at 3{degree}C per minute was caused mainly by methane production at 550{degree}C or lower. When the temperature is raised to 600{degree}C, tar and CO2 increased, and so did the weight loss. Anisotropy was discerned in almost of all coke particles at 450{degree}C, and the anisotropy became remarkable with increase in the maximum ultimate temperature. Coke and volatiles were produced continuously at a temperature raising rate of 50{degree}C per minute, and at 3{degree}C per minute, the production of the coke and volatiles progressed stepwise as the temperature has risen. 7 refs., 6 figs.

  18. Human physiology and psychology in space flight; Uchu hiko ni okeru ningen no seiri to shinri

    Energy Technology Data Exchange (ETDEWEB)

    Murai, T. [National Space Development Agency of Japan, Tokyo (Japan)

    1999-10-05

    Human beings' adaptation to space and the effects on them of a prolonged stay in space are discussed. Some effects may be detrimental to crewmen even when they are medically judged as 'normal' and 'adaptable.' Bone deliming, muscular atrophy, and hypodynamia may be physiologically 'normal' and 'adaptable' in the zero-gravity environment where no strength is required to hold a position or attitude, and they will not cause any serious problems if crewmen are to stay in the zero-gravity environment permanently. Astronauts work on conditions that they return to the earth, however, and they have to stand on their own legs when back on the ground. Such being the case, they in the space vehicle are forced to make efforts at having their bone density and muscular strength sustained. It is inevitable for a space station to be a closed, isolated system, and the crewmen have to live in multinational, multicultural, and multilingual circumstances in case the flight is an international project. They will be exposed to great social and psychological stresses, and their adaptability to such stresses presents an important task. (NEDO)

  19. Influences by shape of flaws in supersonic test. Choonpa tansho ni okeru kekkan keijo no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Sumiya, Y. (Shizuoka Industrial Research Institute, Shizuoka (Japan)); Shimada, Y. (Yamaha Motor Co. Ltd., Shizuoka (Japan))

    1992-07-01

    For the purpose of detecting the shape of flaws in aluminum diecasting products using a supersonic flaw detector, a study was carried out to relate the frequency and focal distance of the probe to the shape of flaws, the influence of surface roughness and the size of surface insensitive zone. The resolution of flaw detection is worsened as the focal distance of the probe is made larger and the frequency is made lower. Whereas no difference is found between flat flaw and drill hole flaw at 5MHz frequency, the difference becomes larger with the increase of frequency. In drill hole flaws, reflection from the drill shoulder part is also detected, generating scatter in detected flaws. In spherical flaws, the reflection from its top section alone is generated, making the detected flaw small. In plane flaws, the flaw is detected in the same size as the actual one. The influence of surface roughness becomes larger as the probe frequency is made higher and the attenuation of reflection echo from the flaw is increased as the surface roughness is greater. No relation is found between focal distance and surface roughness. The area of a surface insensitive zone becomes smaller as the frequency is increased and the minimum area of surface insensitive zone is 0.5mm. 10 figs.

  20. Present status of geothermal power development in Kyushu; Kyushu ni okeru chinetsu hatsuden no genjo

    Energy Technology Data Exchange (ETDEWEB)

    Akiyoshi, M. [Kyushu Electric Power Co. Inc., Fukuoka (Japan)

    1997-10-20

    The present situation was introduced of the geothermal power generation in Kyushu. In Kyushu, where there are lots of volcanos and abundant geothermal resources, the geothermal exploration has been made since long ago. Three non-utility use units at three geothermal power generation points and six commercial use units at five points are now in operation in Kyushu. The total output is approximately 210 MW, about 40% of the domestic geothermal power generation. At Otake and Hacchobaru geothermal power plants, the Kyushu Electric Power Company made the geothermal resource exploration through the installation/operation of power generation facilities. At the Otake power plant, a geothermal water type single flashing system was adopted first in the country because of its steam mixed with geothermal water. At the Hacchobaru power plant, adopted were a two-phase flow transportation system and a double flashing system in which the geothermal water separated from primary steam by separator is more reduced in pressure to take out secondary steam. Yamakawa, Ogiri and Takigami power plants are all for the joint exploration. Geothermal developers drill steam wells and generate steam, and the Kyushu Electric Power Company buys the steam and uses it for power generation. 5 figs., 1 tab.

  1. Annual energy review-1996; 1996 nen ni okeru juyona energy kankei jiko

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-20

    This paper reviews the important items concerned with energy in 1996. Primary energy supply sums to 529times10{sup 13}kcal increasing by 2.4% over last year. The growth rates of demand over last year are 2.5% in industry use, 3.7% in transport use, 3.7% in home use, and 1.3% in business use. On R & D trend of use technologies of energy resources, the following are described: (1) Petroleum: resource exploitation, transport, stock, refining, and petrochemistry, (2) Coal: resource exploitation, coal structure and property, processing, transport, liquefaction, gasification, carbonization, tar industry, carbon industry, and coal ash utilization, (3) Natural gas: resource exploitation, transport, storage, and conversion technology, (4) Natural energy: hydraulic, solar, geothermal, wind power, oceanic and biomass energies, and (5) Others: waste resources, hydrogen and alcohol. On R & D trend of energy conversion technology, combustion theory, boiler, engine, thermal energy system, and high-efficiency power generation technology are described. Environmental problems and their protective technologies are also described

  2. Refraction experiment in the Kobe-Hanshin area; Kobe Hanshin kan ni okeru kussetsuho tansa

    Energy Technology Data Exchange (ETDEWEB)

    Koketsu, K. [The University of Tokyo, Tokyo (Japan). Earthquake Research Institute

    1996-05-01

    The refraction experiments were conducted to investigate the underground structures reaching the basement by analyzing the results of the artificial earthquakes the explosion earthquake research group produced in City of Kobe and the Hanshin District on December 12 to 15, 1995. Considering that noise level can exceed 1 mkine in an urban area even in the mid-night, the courses of traverse were drawn focusing on Points S2 through S4 and U1. The earthquake waves from Points S2 through S4 are generally low in amplitude. However, the major components of the signals have a dominant frequency exceeding 10Hz, which makes them distinguishable from urban noise having a lower frequency, contrary to the previous indication that such a low-amplitude wave might not be distinguishable. On the other hand, the signals from the explosion at Point 4 in Awaji Island cannot be distinguished in the urban area, even on the nearby course of traverse D. At present, the analytical group is organized to read various phases running and analyze the P-velocity structures. 2 refs., 10 figs., 1 tab.

  3. Natural disasters in the Shikoku district. 1. ; Landslide. Shikoku ni okeru shizen saigai. 1. ; Chisuberi

    Energy Technology Data Exchange (ETDEWEB)

    Yatabe, R. (Ehime Univ., Ehime (Japan). Faculty of Engineering)

    1991-09-25

    There are more than ten thousand places in Japan which are in danger of landsliding, and they are mostly distributed in Hokuriku and Shikoku districts. Shikoku is a district which suffers many typhoon disasters, and the rate of ground disasters among the typhoon disasters has been getting higher in recent years. Reports are made on the general characteristics and soil mechanical properties of fractured zone landslides, which are the majority of landslides occurred in the Shikoku district. Most of the landslides in the Shikoku district occurred in Sanbagawa zone, south of the central tectonic line, and little landslides occurred in the granite zone in the Inland Sea area. Although rocks in landslided areas are fractured, little progress is observed for clay formation. The scales of the landslides are from several tens of meters to over 1km, with the average of about 20m, in length and from 200 to 300m in width. Although some of them have the depth of more than 50m, the average is about 20m. Descriptions are made on the relationship between the movement of landslide and rainfall, strength constants of cohesive soil in the slid strata, and the variance in the dynamic constants of cohesive soil in the slid strata. 6 refs., 9 figs.

  4. Magnetic prospecting in Kaibuki-yama ancient tomb; Kaibukiyama kofun ni okeru zenjiryoku sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Nishitani, T. [Akita University, Akita (Japan). Mining College

    1996-10-01

    Kaibuki-yama ancient tomb located in Kumeda, Kishiwada City, Osaka has a square shape in the front and an orbicular shape in the rear, which was considered to be made in the 4th century. This ancient tomb has a total length about 135 m, a diameter of orbicular shape in the rear about 82 m, and a height about 9 m, which is a symbolical existence of the Kumeda ancient tombs. Stone chamber and stone casket made of Sanbagawa crystalline schist or rhyolitic-andesitic tuff are expected in this tomb. Magnetic prospecting in this study is accompanied with this survey. A differential type proton magnetometer was used for the measurements, which were conducted using meshes with 1 m edges. A pair of distinct positive and negative magnetic anomalies were observed in the center of orbicular shape in the rear. This coincides with a location of main body buried, which is archaeologically estimated. The magnetic anomaly might be caused by the article buried in the tomb, such as ironware, based on the measurement of magnetic intensity. From the calculated values of magnetic anomaly using a model, the buried article with magnetic anomaly was considered to have a size with length of 1 m, width of 0.1 m, and height of 0.2m. The negative magnetic anomaly could not be explained only by this. It is necessary to consider the other reasons. 8 refs., 8 figs.

  5. Detailed seismic intensity in Morioka area; Moriokashi ni okeru shosai shindo bunpu

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T.; Yamamoto, H.; Settai, H. [Iwate University, Iwate (Japan). Faculty of Engineering; Yamada, T. [Obayashi Road Construction Co. Ltd., Tokyo (Japan)

    1996-10-01

    To reveal a seismic intensity distribution in individual areas, a large-scale detailed seismic intensity survey was conducted in Morioka City through questionnaire, as to the Hokkaido Toho-oki (HE) earthquake occurred on October 4, 1994 with a record of seismic intensity 4 at Morioka, and the Sanriku Haruka-oki (SH) earthquake occurred on December 28, 1994 with a record of seismic intensity 5 at Morioka. A relationship was also examined between the seismic intensity distribution and the properties of shallow basement in Morioka City. The range of seismic intensity was from 2.9 to 4.6 and the difference was 1.7 in the case of HE earthquake, and the range was from 3.1 to 5.0 and the difference was 1.9 in the case of SH earthquake. There were large differences in the seismic intensity at individual points. Morioka City has different geological structures in individual areas. There were differences in the S-wave velocity in the surface layer ranging from 150 to 600 m/sec, which were measured using a plate hammering seismic source at 76 areas in Morioka City. These properties of surface layers were in harmony with the seismic intensity distribution obtained from the questionnaire. For the observation of short frequency microtremors at about 490 points in the city, areas with large amplitudes, mean maximum amplitudes of vertical motion components more than 0.1 mkine were distributed in north-western region and a part of southern region. 4 refs., 9 figs., 1 tab.

  6. Characteristics of microtremors in Hanshin area; Hanshin chiiki ni okeru bido no kihon tokusei nitsuite

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H.; Suzuki, K.; Yamanaka, H.; Seo, K. [Tokyo Institute of Technology, Tokyo (Japan)

    1996-10-01

    To increase general understandings of fundamental characteristics of microtremors in Hanshin area, microtremors have been observed at Sumiyoshi River-side, Rokko Island, and Nishinomiya. Relations were discussed among the stability of predominant period, successive fluctuation and meteorological conditions. For the analysis, cosine-type taper was conducted before and after 10% of the observed records, and Fourier spectrum was calculated by smoothing using Parzen window with a band width 0.3 Hz. Geometrical mean of two components was used as a horizontal component. At the observation points except Sumiyoshi River-side, predominance in the short period side was not distinct, and was not stable due to the successive fluctuation of predominant period. However, there was less successive fluctuation of spectrum ratio between different two points in the band with period more than 1 sec. Since there was a close correlation between the successive fluctuation in this band and the wind velocity or air pressure, the microtremors in this band was affected by a single vibration source. Ground characteristics could be illustrated by the averages of ratio against base points of moving observation. 14 refs.

  7. Flame spread over wire insulation under microgravity; Bisho juryokuba ni okeru dosen hifukuzaijo no kaen moehirogari

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, O.; Kikuchi, M.; Ito, K. [Hokkaido University, Sapporo (Japan); Sato, S. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Sakuraya, T. [Japan Space Utilization Promotion Center, Tokyo (Japan)

    1999-04-25

    An experimental study of flame spread phenomena over ETFE (Ethylene-Tetrafluoroethylene) insulated wire was performed under microgravity to obtain fundamental data on fire safety in space. The effects of the parameters thought dominant for wire combustion in fires-the ambient oxygen concentration, wire initial temperature, T{sub I}, and wire diameter, d{sub w}, - were investigated in the microgravity experiments. A series of comparative experiments were also conducted at normal gravity. Flame shape under microgravity changed depending on the state of the molten fuel accumulation. Experimental results showed that there existed a possibility of higher flame spread rates under microgravity than at normal gravity, in spite of lower flame temperature in microgravity. Wire initial temperature, T{sub i}, had a very large influence both on flame spread rates and extinction limit of the wire under microgravity. The degree of flame spread rate decreased with increase in d{sub w} and, correspondingly, the increase with decrease in d{sub w} under microgravity was higher than at normal gravity. (author)

  8. Advanced technology trend survey of micromachines in Europe; Oshu ni okeru micromachine sentan gijutsu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    In this research survey, the development trend of micromachine technology in Europe was surveyed, development level of micromachine technology of European companies was grasped, and practical application fields of their target were investigated. Technology development level of private companies in Japan`s national projects and practical application fields of Japan`s target were arranged. Trends of micromachine technology development are compared between Japanese companies and European companies. Among micromachine technology development projects in Europe, ``8520 MUST`` is a part of the ESPRIT Project. About 40,000 companies among about 170,000 companies in whole Europe are relating to the MUST Project. The main fields include the manufacturing technology, process control of machines, technology of safety, sensor technology in environmental fields, and automotive technology. The marketing fields of application include the automobile, military technology, home automation, industrial process, medical technology, environmental technology, and games. The results can be compared with the direction of research and development in Japan. 22 figs., 8 tabs.

  9. Design of full MOX core in ABWR; ABWR ni okeru furu MOX roshin no sekkei

    Energy Technology Data Exchange (ETDEWEB)

    Hirose, Tsutomu; Sasagawa, Masaru; Sakuma, Takanori [Hitavhi Ltd., Tokyo (Japan); Kinoshita, Yutaka

    1999-02-15

    A full MOX-ABWR, loaded with mixed-oxide (MOX) fuels of up to 100% of the core, is planned. Increased MOX fuel utilization will result in greater savings of uranium. Studies on the fuel rod thermal-mechanical design, the core design and the safety evaluation have been made, and the results are summarized in this paper. To sum it all up, the safety of the Full MOX-ABWR has been confirmed through design evaluations adequately considering the MOX fuel and core characteristics. (author)

  10. Dissipative structure of mechanically stimulated reaction; Kikaiteki reiki hanno ni okeru san`itsu kozo

    Energy Technology Data Exchange (ETDEWEB)

    Hida, M. [Okayama Univ., Okayama (Japan). Faculty of Engineering

    1994-12-20

    Recently various studies have been conducted concerning the state changes of materials obtained through mechanical alloying (MA) or mechano-chemical (MC) processing. What is noticeable is the quasi-steady state of almost all the materials obtained through various processes including MA and MC, and that the super cooling, supersaturating and high residue distortion realized under unbalanced conditions have not been clarified. In other words, the tracing capability to the external binding conditions is low. In this report, the appearance of the high temperature phase and high pressure phase obtained through MA or MC processing, the forming of amorphous, the mesomerism of the amorphous materials, the interesting phenomena generated by combination between the mechanical disturbance and chemical reactions were discussed with concrete examples, and a steady dissipative organization theory was approached from the viewpoint of dissipative structure development which is equal to the forming process of the quasi-steady phase. 34 refs., 2 figs.

  11. Prospect of concrete technology; Kenchiku ni okeru korekarano konkurito gijutsu no tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Tadahiko [Shimizu Corp., Tokyo (Japan)

    1999-10-10

    The privatization of state-owned companies, the abolition of the protectionism to domestic industries and the market liberalization, deregulation to the economic activities or movement to abolition of regulation were concretely made a start. Moreover, the reform of the social life was also requested with an increasing of international global environmental preservation. These reform influences in the construction industry have been affected and could not ignored in consideration of the development in the 21st century. In this paper, the summary of reform in development, construction industry; especially the correspondence in the construction industry and the relation to concrete technology from now were described. Especially, concerning establishment of concrete technology, it was given as the construction of the safe and comfortable space, highly production technical development, countermeasures to resource-saving and environmental preservation, search of new concrete materials, development of the renewal technology and correspondence to large project. (NEDO)

  12. Survey of Joint Implementation activities in China; Chugoku ni okeru kyodo jisshi katsudo kanren chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    It is a large task for Japan to positively promote the Joint Implementation activities related to the United Nations Framework Convention on Climate Change. Rapid increase in the emission of greenhouse-effect gases, especially CO2, is predicted in China with remarkable economic growth and population of 1.2 billion. It is essential to promote the Joint Implementation activities in China. In this survey, framework, organization, problems and tasks were investigated to effectively promote the Joint Implementation activities in China. Construction of framework for the real Joint Implementation activities has been proposed. Current problems for promoting the Joint Implementation activities in China are that the distinct guideline for the Joint Implementation is not established in the government, that the receiving system including receiving, planning and arranging sections is not established, and that the burden problems for the costs of project evaluation, data acquisition, monitoring, and verification are not solved. 5 refs., 21 figs., 6 tabs.

  13. Application of liquid atomization to the pharmaceutical process. Iyaku ni okeru biryuka no oyo gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Takei, N. (Freund Industrial Co. Ltd., Saitama (Japan))

    1991-04-20

    A coating system is introduced as a liquid atomization technique for oral administration drug applied to the pharmaceutical process. Controlled release of drug dissolution in the human body is important. How to dissolve the drug by coating granules is described here. For example, the core of a drug granule is made up by spherical granulated sucrose, the intermediate layer as a main element by theophylline which is an asthma medicine, the outer layer by an ethylcellulose film. Theophylline takes 30 minutes to dissolve and the ethylcellulose-coated granule does more than 16 hours. A fluidized tumbled bed type coating apparatus is developed to prevent unevenness, adhesion and aggregation. Even in the same chemical species, the dissolution speed differs in a crystal type, crystalline or amorphous and anhydrous or hydrate. Acceleration of the drug dissolution is studied. A suspension which is an ethanol solution of hydroxy propy/cellulose with supersaturated antiflammatory drug, atomized by a jetcoating system, is coated on the surface of potato starch powder. The drug as a main element shows only a 10% dissolution rate in 8 hours. On the other hand, the drug coated show a 100% dissolution rate in 2 hours. This is because the coating crystallizes the drug itself in the film and promotes its dissolution. 6 refs., 8 figs.

  14. Autosolvent effect of bitumen in thermal cracking; Netsubunkai hanno ni okeru bitumen no jiko yobai koka

    Energy Technology Data Exchange (ETDEWEB)

    Mikuni, M.; Sato, M.; Hattori, H. [Hokkaido University, Sapporo (Japan). Center for Advanced Research of Energy Technology; Nagaishi, H.; Sasaki, M.; Yoshida, T. [Hokkaido National Industrial Research Institute, Sapporo (Japan)

    1996-10-28

    Tar sand bitumen is petroleum-based ultra-heavy oil, and has a great amount of reserve like coal. However, there are still a lot of problems for its highly effective utilization. This paper discusses whether the light components in bitumen show independent behavior during the thermal cracking of heavy components, or not. Solvent effect and reaction mechanism during the thermal cracking are also derived from the change of their chemical structures. Athabasca tar sand bitumen was separated into light and heavy fractions by vacuum distillation based on D-1660 of ASTM. Mixtures of the both fractions at various ratios were used as samples. Negative effect of the light fraction on cracking of the heavy fraction was observed with dealkylation and paraffin formation Polymerization of the dealkylated light fraction to the heavy fraction was suggested due to lack of hydrogen in the thermal cracking under nitrogen atmosphere, which resulted in the formation of polymer. 3 refs., 6 figs.

  15. Measurement of organic carbon quantity at chemoautorophic bacterium; Kagaku dokuritsu eiyo saikin ni okeru yuki tansoryo no sokutei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Tsuda, I.; Kato, K.; Nozaki, K. [Electrotechnical Laboratory, Tsukuba (Japan); Kurokawa, K. [Tokyo University of Agriculture and Technology, Tokyo (Japan)

    1996-10-27

    Described herein is the method for analyzing quantity of organic carbon synthesized by chemoautotrophic bacterium. It is based on the combustion-infrared spectroscopy, which is normally adopted for quantitative analysis of organic carbon. The problems involved in the measurement of organic compounds synthesized by iron-oxidizing bacteria are noise by culture medium components, aging of gas analyzer and contamination with organic compounds from a silicon plug. The measures taken in this study against these problems include comparison of the results with a medium containing iron-oxidizing bacteria with those with a medium free of these bacteria, calibration with the standard solution for each measurement, and replacement of a silicone plug by a silicon cap. Organic carbon is measured by a TOC-5000 analyzer equipped with an automatic sample feeder ASI-5000. Biomass density is determined by the MPN method. It is confirmed that organic carbon quantity is almost in proportion to biomass density, a phenomenon which can be used to determine organic carbon quantity. 7 refs., 6 figs., 1 tab.

  16. Fate of oil spill in the persian gulf. Persia wan ni okeru oil spill no unmei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Horiguchi, F.; Nakata, K. (National Research Institute for Pollution and Resources, Tsukuba (Japan)); Kojima, T.; Kanemaki, S.; Sugioka, S. (Fuyo Ocean Development and Engineering Co. Ltd., Tokyo (Japan))

    1991-07-25

    In order to predict the fate of the oil spill in the Persian Gulf that has occurred during the Gulf War, a model to predict diffusion of oil mixed into water was applied to the waters. Calculations on the simulation to predict the oil spill diffusion were carried out for two cases; one with the oil spill mixed into the water, and the other not mixed. For the case of the oil spill not mixing into the water, the oil spill discharged at the end of the bay was predicted to diffuse over a certain area of the ocean surface, and then move down to the Oatar Peninsula along the west coast of the bay changing little the area. For the case of the oil spill mixed into the water, the oil will continue drifting on the ocean surface for a certain period of time. Thereafter, however, the oil grown emulsified will mix into the water and begin settling down. The diffusion will get weakened in places where the current is slow, and the oil spill will settle down and deposit on the ocean bottom, according to the prediction. 6 refs., 20 figs., 1 tab.

  17. On noise, traffic and factory vibrations in Akita city; Akitashi ni okeru soon oyobi kotsu kojo shindo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M.; Kikuchi, T.; Morino, T.; Sannohe, M. [Akita University, Akita (Japan). College of Education

    1996-05-01

    Noise and vibration were measured in Akita City. In 1994, noise and traffic-caused vibration were measured along the trunk lines and other roads across the entire Akita City area. In 1995, the effort centered on the Ibarashima manufacturing quarters, the important source of noise and vibration in Akita city. The general-purpose noise meter LA-220S was used to measure noise and the vibration level meter VR-5100 was used to measure vibration. The results of noise measurement carried out at 122 points in Akita City indicated that the noise level was high along Route 7, Route 13, and the southern line belonging to the newly built national highway, marking the highest of approximately 74dB. As compared with the measurement made in 1968, the value was higher by 3-13dB. A roughly similar trend was seen in vibration. The noise level measurement of 1995 accomplished at 100 points in the vicinity of Ibarashima district indicated that the factories were responsible for high levels of noise and vibration. It was found that the levels lowered in proportion to the increase in the distance from the factories. 11 figs., 1 tab.

  18. Study on the optimal control of the ground thermal storage system in the greenhouse. Part 4; Onshitsu ni okeru taiyo energy dochu chikunetsu system ni okeru saiteki seigyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, M. [Sanko Air Conditioning Co. Ltd., Osaka (Japan); Nakahara, N. [Kanagawa University, Yokohama (Japan)

    1996-10-27

    Three types of weight in both energy saving and optimum room temperature environment were changed to obtain the optimal control solution of the ground thermal storage system in a greenhouse. The relation diagram between the optimal solution of a performance function, and the state constraints and control function constraints was created in consideration of the energy term in a control function value area and the room temperature environment. As a result, the whole image of the performance function could be grasped in consideration of the energy term with inequality constraints and the room temperature environmental term in this study. The rate of a weighting factor in the performance function significantly influences the optimal solution. The influence on the optimal solution also changes when the optimal room temperature schedule differs. The influence that three types of rising algorithm exert on the convergence and converging speed was investigated. Superiority or inferiority occurs according to the space properties of a performance function. A zigzag method is most disadvantageous. The constraints can be converged to the optimal solution using an SUMT outer point method irrespective of the initial value. 6 refs., 6 figs., 4 tabs.

  19. Effectiveness of aquatic microcosm system containing material cycle as method of toxicity and ecological assessment; Microcosm ni okeru busshitsu junkan to sono dokusei oyobi seitaikei eikyo hyoka shiken ni okeru yukosei

    Energy Technology Data Exchange (ETDEWEB)

    Inamori, Y. [National Inst. for Environmental Studies, Tsukuba (Japan); Takamatsu, Y. [University of Tsukuba, Tsukuba (Japan)

    1995-08-10

    The microcosm has its etymology in the `small outer space`, which is a system that groups or clusters of solid substances are cultivated in a certain container. The system has been prepared to elucidate the ecology and interactions of microorganisms and their structures. This paper describes analysis and assessment on the system based on the results of past studies thereof with an intention to utilize it as a model aquatic ecosystem for a test to assess influence on the ecosystem. It is necessary that, in the case of evaluating the influence on chemical substances, an elucidation be made on a concentration at which clusters of living organisms are not affected even if such chemical substances exist in the environment for a long period of time. In the case of an exotic microorganism, an elucidation should also be given on a concentration that does not affect the environment as seen from the survivability of the microorganism in the environment and its interactions with other microorganisms. A large number of examples of experiments shows that a microcosm test contains material cycle and interactions in multiple kinds of living organism systems, and has high reproducibility and stability. A discussion should now be required that the above test method be positioned as an ecosystem assessment method. 19 refs., 3 figs.

  20. 3D seismic survey in Honjo, Akita. Problems and struggles in acquisition and processing; Akitaken Honjo koku ni okeru sanjigen jishin tansa. Genba sagyo to data shori ni okeru mondaiten

    Energy Technology Data Exchange (ETDEWEB)

    Imahori, S.; Kotera, Y.; Nakanishi, T. [Japan Energy Development Co. Ltd., Tokyo (Japan)

    1997-05-27

    Honjo mining area where investigations are conducted is hilly and has a complicated terrain with gas pipes buried in the ground just under the access road disabling the proper positioning of shock-generating large excavators or vibrators. Auger`s shallow hole shooting method is used in this survey to execute blastings at 639 points. In this method using charge depths of 4m, different from the conventional method using deeper charge depths (20-25m), surface waves prevail in the shot records giving rise to a new problem of removing them in the stage of data processing. The 2D filter that is a powerful tool in 2D data processing is not available in a 3D-survey where the tracing intervals are irregular in the shot records. In the effort of this time, a window length as a parameter in the direction of time is specified, and the F-X dip filtering method is employed in which any event that linearly continues beyond a certain number of traces in the said window is eliminated as a linear noise. It is recommended that the weighting function be changed in the direction of space since surface wave velocities are different at different locations. 1 fig., 1 tab.

  1. Polymer-based matrix composites in general industries. Ippan sangyo bun'ya ni okeru kobunshiki fukugo zairyo

    Energy Technology Data Exchange (ETDEWEB)

    Kenmochi, K. (National Institute of Materials and Chemical Research, Tsukuba (Japan))

    1994-02-15

    This paper summarizes the course of development of polymer-based matrix composites (PMC) begun in the 1950's, their future problems, and prospects. Because of PMC being a petroleum product, the changing period before and after the first and second oil crises (1974-1983) has seen even a negative growth from the declined product price out of increased material cost. However, the materials have been continuing expansion in such applications year after year for two decades since then as plant, marine vessel, and housing materials. The course of their development to date has included such proliferation impeding factors as unproved reliability, high production cost, and legal regulations because of being new materials. However, the ardent technical development efforts having produced a number of products including hybrid FRP, particularly the fundamental technology development studies sponsored by the Ministry of International Trade and Industry, have improved properties and reliability and contributed largely to expanding practical applications. Sought in different functions expected in PMC in the future would be application of bionic designs, transfer from functional quality to sensitive quality, and development of material recycling techniques. 8 refs., 11 figs., 1 tab.

  2. Geotechnical application of geological information on Kanto loam; Kanto loam ni okeru chishitsugaku no jiban kogaku eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    So, E. [Kanto Gakuin University, Yokohama (Japan)

    1998-02-01

    Quantitative relationship between the allophane clay minerals in the Kanto Loam is cited to describe the relationship between their stratigraphic features and geotechnical features. The Kanto Loam is a soil of weathered Diluvial volcanic ash deposited on hills and plateaus. The Tachikawa loam is the newest, followed by the Musashino loam, Shimosueyoshi loam, and Tama loam, named in the order from new to old. The Tachikawa and Musashino loams are relatively new loams formed approximately several tens of thousand years ago, and are different from each other in the percentage of allophanes (Ap), which is 50% or higher for the Tachikawa loam and 40% or lower for the Musashino loam, and in the equivalent liquid limit (Ap equivalent index number), which is 115% or higher for the Tachikawa loam and 105% or lower for the Musashino loam. The new loam behaves like the Ap-governed volcanic ash while the old loam behaves like the alluvial clay. There is a linear, proportional relationship between Ap of the new loam and the geotechnical index number. The physical and dynamic behavior of the new loam is all under control of the aggregate structure formed of allophanic clay minerals, the loam behaving like sand when not disturbed and like clay when disturbed. The physical and dynamic properties are also discussed. 6 refs., 5 figs., 1 tab.

  3. Role of ventilation systems in the prevention of hospital infection; Innai kansen boshi ni okeru kanki system no yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Ayliffe, G.

    1996-05-05

    This paper investigates and considers the actual state of hospital infection. The 80% or more of surgical wound infection is self-infection, for which the factor is the microorganisms that exist in a surgical wound at the completion of an operation. Airborne infection is generally due to staphylococcus aureus. There rarely is a bacteria carrier, and the germ is dispersed from him in some instances. Staphylococcus epidermis sticks to prosthesis, propagates and causes wound infection in rare occasions. Clostridium perfringens and escherichia coli also sometimes cause self-infection from wound. An ordinary plenum ventilation system is less effective for the prevention of wound infection. A remarkable example for reduction in infection is the employment of an ultra clean air system in joint replacement operations, showing reduction in joint septicemic infection from 1.5 to 0.3%. A vertical air flow system may be effectively employed in an operation room for the purpose of improving the air stream. No interrelation exists between the total number of indoor bacteria and infection without staphylococcus aureus. A person infected by methicillin-resistant staphylococcus has to be isolated into a unit. 13 refs., 1 fig., 1 tab.

  4. Buckling model of longitudinal reinforcing bars under reverse cyclic load; Koban kurikaeshi kajuka ni okeru chukin no zakutsu model

    Energy Technology Data Exchange (ETDEWEB)

    Murayama, Y.; Suda, K.; Ichinomiya, T.; Shinbo, H. [Kajima Corp., Tokyo (Japan)

    1994-10-31

    For RC (reinforced concrete) columns such as towers of long-span cable-stayed bridges or high-rise piers, there is desired development of an analytical method including a method of arranging reinforcing bars for increasing their ductility against strong earthquake motion. For this, it is necessary to investigate their characteristics after their being rendered to maximum load and their final states, and hence there must be newly investigated the properties of a plastic hinge formed on the bottom of the column, particularly determination of the buckling point of reinforcing bars and a hysteresis model after the buckling. In this study, there is developed a direct method of measuring the stress of reinforcing bars embedded in a model specimen which is conventionally difficult to be measured, and there is investigated the stress-strain hysteresis of the bars before and after the buckling thereof. The principle of the method of measuring the stress is such that only a local minimum portion of objective reinforcing bars is rendered to rf quenching, and a distortion gauge is sticked to the center of the quenching. This is based upon a fact that that portion keeps a linear relationship between the stress and the strain even if a host material is yielded. On the basis of an experimental result, a mechanism of buckling of these bars is clarified and a buckling model of the reinforcing bars at the plastic hinge. 6 refs., 15 figs., 2 tabs.

  5. Magnetic susceptibility measurements in Yellowstone National Park, USA; Beikoku Yellowstone kokuritsu koen ni okeru genchi jikaritsu sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Okuma, S. [Geological Survey of Japan, Tsukuba (Japan)

    1997-05-27

    For the purpose of interpreting data of the aeromagnetic anomalies in Yellowstone National Park in the U.S.A., in-situ magnetization intensity measurements have been carried out in 1994 and 1995 on geological outcrops of rocks in that area. Comparisons and discussions were given on the measurement results, and existing rock magnetic data and aeromagnetic anomaly data available for the area. Outside the Yellowstone caldera, part of granitic gneisses among the Precambrian granitic gneisses and crystalline schists distributed to the north has an abnormally high magnetization intensity of 1 {times} 10 {sup -2} SI. This could be a powerful anomaly source for the high magnetic anomaly in this area. Paleogene volcanic rocks distributed widely in the eastern part of the park also have magnetization intensity as high as 1 {times} 10 {sup -2} SI or higher, which are also thought a powerful anomaly source in this area. Part of Pleistocene basalts which are exposed partially in the western part of the park has also very high magnetization intensity at 1 {times} 10 {sup -2} SI or higher. This suggests correlation with the magnetic anomaly in the east-west direction distributed in this area. Quaternary rhyolites are more magnetic than Quaternary welded tuffs, which should give greater effects to the magnetic anomaly. 10 refs., 5 figs.

  6. Deep sedimentary structure model beneath the Osaka plain; Osaka heiya ni okeru shinbu chika kozo no model ka

    Energy Technology Data Exchange (ETDEWEB)

    Miyakoshi, K.; Kagawa, T.; Echigo, T. [Osaka Soil Test, Osaka (Japan)

    1997-05-27

    Restructuring was carried out on a sedimentary basin structure model of the Osaka plain including Osaka Bay by using newly obtained underground structural data. After the Hygoken-nanbu Earthquake of 1995, a large number of underground structure investigations have been performed in Osaka Bay and urban areas of Kobe and Osaka. However, very few surveys have been done in areas peripheral to Osaka Prefecture, such as the Ikoma area. Therefore, an attempt has been made to increase the number of measuring points to acquire underground structural data of these areas. Estimation of basic rock depths has utilized the dominant cycles in H/V spectra obtained from micro vibration survey, and good correlation of the base rock depths derived by a refraction exploration and a deep-bed boring investigation. With regard to bed division and P- and S- wave velocities in sedimentary beds in the Osaka sedimentary basin, an underground structure model was prepared, which was divided into four beds according to the refraction exploration and the micro vibration investigation. Data obtained by using this model agreed well with depth data acquired from physical exploration and other types of investigations. However, no good agreement was recognized in the data for such areas where the basic depth changes abruptly as the Rokko fault and the Osaka bay fault. 6 refs., 8 figs., 2 tabs.

  7. Relation between frequency of seismic wave and resolution of tomography; Danseiha tomography kaiseki ni okeru shuhasu to bunkaino no kankei

    Energy Technology Data Exchange (ETDEWEB)

    Fujimoto, M.; Watanabe, T.; Ashida, Y.; Sassa, K. [Kyoto University, Kyoto (Japan). Faculty of Engineering

    1997-05-27

    With regard to the elastic wave exploration, discussions have been given on the relationship between frequency and resolution in P-wave velocity tomography using the initial travel time. The discussions were carried out by using a new analysis method which incorporates the concept of Fresnel volume into tomography analysis. The following two arrangements were used in the calculation: a cross hole arrangement, in which seismic source and vibration receiving points were arranged so as to surround the three directions of a region extending 250 m in the horizontal direction and 500 m in the vertical direction, and observation is performed between two wells, and a permeation VSP arrangement in which the seismic source is installed on the ground surface and receiving points installed in wells. Restructuring was performed on the velocity structure by using a total of 819 observation travel times. This method has derived results of the restructuring according to frequencies of the seismic source used for the exploration. The resolution shown in the result of the restructuring has become higher as elastic waves with higher frequency are used, and the size of the structure identified from the restructuring result has decreased. This fact reveals that sufficient considerations must be given on frequencies of elastic waves used according to size of objects to be explored. 4 refs., 4 figs.

  8. Diagnostic monitoring of power plants. ; Key to predictive maintenance. Hatsudensho ni okeru shindan kanshi. ; Yobo hozen no yoten

    Energy Technology Data Exchange (ETDEWEB)

    Armor, A.; Scheidel, J.; Blanco, M. (Electric Power Research Institute, (USA))

    1990-10-15

    Together with experience, experienced by power plants at the primary stage of diagnostic monitoring, the present paper explained pioneer work by the EPRI in the field of predictive maintenance, to plan it for its future appearance on the stage. American industrial circle emphasizes the power generation plants to be continuously increasing in number for 30 to 40 years or more years from now on. Accordingly, the necessity is also increasing of pursuring the status of facilities. Actually, the economic profitability of old facilities depends upon ability of detecting unexpected troubles and prevention from main obstacles. It is believed that, by combination of uptodate ability of computer and recently developed ability of sensor, operating even under a severe condition, detection and diagnosis can be made of creep phenomenon, metallic fatigue, corrosion and other degradation effects. Approach by the expert system in the diagnosis has already widened the usability of monitoring unit, which widening is judged to continue from now on. 12 figs., 3 tabs.

  9. Studies on reactivity of coal surfaces at low temperature; Teion ni okeru sekitan hyomen no hannosei no kento

    Energy Technology Data Exchange (ETDEWEB)

    Yasuda, H.; Kaiho, M.; Yamada, O.; Soneda, Y.; Kobayashi, M.; Makino, M. [National Institute for Resources and Environment, Tsukuba (Japan)

    1996-10-28

    With an objective to learn reactivity of coal at its surface, surfaces of oxidized coal samples were investigated. Miike coal was oxidized by using {sup 18}O2 in a closed loop system. As the reaction progresses, proportion of CO2 including isotopes increased rapidly as a result of oxidation of CO sites existing in the coal and the newly generated C{sup 18}O sites. The oxidizing reaction progressed via oxygen adsorbing sites generated near the surface, and oxygen containing groups. An FT-IR analysis estimated the depth of the oxidized layer to be 10{mu}m or less from particle surface. The oxidized coal was pulverized to see its surface condition. Functional groups introduced by the oxidation enter into the vicinity of the surface in a form to desorb as CO. CO2 is trapped in inner pores. The coal surface was observed by using an atomic force microscope. No observable openings in the pore structure were discerned on the surface before the oxidation, and the structure agrees with a closed pore model. Surface image oxidized in-situ by oxygen for one hour had slight roundness, which led to a supposition of structural change, and changes in the functional group and adsorption species. 7 refs., 5 figs.

  10. Gas purging system at emergency stop of a fuel cell. Nenryo denchi no kinkyu teishiji ni okeru gas purge hoshiki

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Hirotoshi.

    1989-12-01

    This invention aims to provide a gas purging system wherein an external inactive gas is introduced into the cell body for replacing the reaction gas at an emergency stop of a control power source, without requiring any auxiliary batteries. For this purpose, in this invention, an inactive gas supply line is connected, via a gas purging electromagnetic valve, to a reaction gas supply line which goes to the main fuel cell body; the driving coil of the electromagnetic valve is connected between the terminals of the fuel cell through the intermediary of a contact point of a relay for detection of extinction of the control power source. At the emergency stop of above accident, the residual electric energy of the fuel cell itself opens the electromagnetic valve, thus introducing the inactive gas into the main fuel cell body. The result is that the gas purging is conducted without any trouble, without requiring any auxiliary batteries as in the conventional system; the protection of the fuel cell is thus attained. 2 figs.

  11. Combustion synthesis technology for metal-ceramic composite production. Kinzoku-ceramics fukugotai seizo ni okeru nensho gosei gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Odawara, O. (Tokyo Institute of Technology, Tokyo (Japan))

    1994-03-01

    This paper describes an outline of a centrifugal thermit method, which is to form ceramic layers inside a metallic tube by using centrifugal force and high temperature generated through spontaneous propagation of combustion reaction of powder. In the typical thermit reaction, Al powder and iron oxide react to each other to form Al2O3 and metal iron. In this reaction, heat as high as 836kJ/mol for Al2O3 is generated, and adiabatic temperature becomes more than 3500K. When this reaction is induced in the metallic tube that rotates at high speed, both reaction products and an internal surface of the metallic tube melt, so that a multiple-unit tube consisting of 3 layers (Al2O3 layer, generated metal layer, and metallic tube, in order from inside) can be obtained by the action of centrifugal force. The thermit reaction is characterized by its rapid propagation on the internal surface of the powder mixture, which becomes hollow due to centrifugal force, followed by its uniformly radial propagation in the tube. The multiple-unit tube is resistant to the thermal shock and the shock caused by external force, as it is characterized by the residual stress distribution after cooling. Therefore this tube can be applied as a transport tube for solid slurry and molten metal. 18 refs., 3 figs.

  12. Interphase boundary structure and transformation mechanism in diffusional phase transformations; Kakusan hentai ni okeru iso kaimen kozo to hentai kiko

    Energy Technology Data Exchange (ETDEWEB)

    Furuhara, T.; Maki, T. [Kyoto University, Kyoto (Japan)

    1997-05-20

    This paper discusses a lattice changing mechanism in diffusional phase transformations (atom diffusion rate determination) based on observations through a high-resolution electron microscope. If a parent phase and a generated phase have different crystal structures, change in lamination occurs as a result of a step generated on a terrace with good consistency moving in the horizontal direction. In addition, it has been thought that removal of atoms occurs due to random diffusion jump in a riser or a kink which has a locally inconsistent structure, and no surface undulations will occur. On the other hand, growth interfaces are consistent in martensite transformation, and atomic correspondence is univocal in the parent phase and the generated phase. Also in diffusion transformation accompanying distribution of displacement type elements, the surface undulations will appear as in the case of the martensite transformation. This fact suggests that, also in the diffusional transformation, not only the terrace interface, but also the riser or kink interface having been thought inconsistent conventionally are all consistent or semi-consistent as in the martensite transformation. It also suggests that lattice correspondence exists between the parent phase and the generated phase. 30 refs., 16 figs., 1 tab.

  13. Superplasticity of low carbon HSLA steel during bainite transformation. Teitanso teigokinko no beinaito hentai ni okeru chososei kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, H.; Yamamoto, S.; Miyaji, H.; Furubayashi, E. (National Research Inst. for Metals, Tsukuba, Ibaraki (Japan))

    1993-12-01

    Recently, the development of high strength low alloy steel (HSLA steel) of untempered type is advanced by using the comparatively high strength and excellent tenacity of the bainite or martensite of carbon remained being transformed. In the present researches, the superplasticity during the bainite transformation due to the continuous cooling and changes of the structure as well as the mechanical properties due to the superplastic deformation are examined with the samples of Mn-Cr-Mo system HSLA steel. The results obtained therefrom are shown as follows. The temperatre range of B[sub S] and bainite transformation is moving to the higher temperature side along with the increasing of the applied stress when it is over 60 MPa. The bainitic structure is composed of the mixture lath-like bainitic ferrite and granular bainitic ferrite in the use of having no applied stress, while the percentage of the latter increases simultaneously with the increasing of the applied stress. Transformation superplastic strain is increasing together with the increasing of the applied stress, and its increasing is over the linear function when the applied stress is above about 50 MPa. 22 refs., 9 figs., 2 tabs.

  14. Fault analysis in the very shallow seismic reflection method. 2; Gokusenso hanshaho ni okeru danso kaiseki. 2

    Energy Technology Data Exchange (ETDEWEB)

    Nagumo, S.; Muraoka, S.; Takahashi, T. [Oyo Corp., Tokyo (Japan)

    1997-05-27

    Fault analysis is required in addition to the ordinary process of structural analysis (CDP stacking) for the examination of discontinuity in the reflection horizon in question. The fault shape restoration principle is that the reflection point of a reflection wave observed at a certain receiving point is on an ellipse with the shock point and receiving point at its focal points and that the sum of the distances between the reflection point and the focal points is equal to the reflection wave propagation time. The DMO velocity is worked out by calculation using the positive travel time and inverse travel time from the common reflection surface. When the reflection surface is inclined by {theta}, the average interval velocity/cos{theta} is called the DMO velocity. When the reflection surface inclination and the average interval velocities are determined separately in this way, the position of the reflection point may be worked out, and this enables the calculation of the amount of migration (lateral movement). The reflection wave lineups carried by the original record are picked up one by one, and the average interval velocities are treated very prudently. After such a basic DMO conversion treatment, the actualities of the fault are described fairly correctly. 3 figs.

  15. Shallow seismic reflection prospecting in Hachiro-kata reclaimed land; Hachirogata kantakuchi ni okeru senbu hanshaho jishin tansa

    Energy Technology Data Exchange (ETDEWEB)

    Kitsunezaki, C.; Fukutome, T.; Matsumoto, S.; Noda, K.; Sato, T. [Akita University, Akita (Japan). Mining College; Hayashi, H.; Ishii, E.; Yamanaka, Y.; Matsuno, K.; Mikuni, S. [Suncoh Consultant Co. Ltd., Tokyo (Japan)

    1997-05-27

    Along the Japan Sea coast in Akita Prefecture and in the vicinity, there exist active fault groups, such as the Kitayuri thrust fault group in the south and Noshiro thrust fault group in the north. It is estimated that there is another fault, running from Akita City located between the above-said two thrust fault groups into the Hachiro-kata reclaimed land, roughly connecting the two thrust fault groups. This third fault is supposed to be related to the hypocenter of Tencho Earthquake of 830, but its location and structural configuration are not known, and it is not known whether it is an active fault, either. Investigations are conducted using S- and P-waves. The greatest problem in the use of P-waves is that there exists a layer in which signal attenuation is high and transmission is anomalously slow. This problem is ascribed to the layer pore water rendered unsaturated though slightly by the inclusion of air bubbles, and is explained for the most part by the White model. A survey using S-waves is advantageous in that it does not experience no difficulty of this kind. In the P-wave cross section, a structure supposed to be an inversion layer is observed at a level deeper than 200m. In the case of the S-wave method, more details of the shallow structure will be available when the degree of CMP stacking is augmented as usual. 2 refs., 9 figs., 1 tab.

  16. 3D seismic experiment in difficult area in Japan; Kokunai nanchiiki ni okeru sanjigen jishin tansa jikken

    Energy Technology Data Exchange (ETDEWEB)

    Minegishi, M.; Nakagami, K.; Tanaka, H. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1997-05-27

    Difficult area in this context means an exploration-difficult area supposed to store oil/gas but retarded in exploration for the lack of knowledge about the geological structure due to poor quality of available seismic survey records. Discussed in this paper is a survey conducted into an area covering the southern part of Noshiro-shi, Akita-ken, and Yamamoto-cho, Yamamoto-gun, Akita-ken. An area size suitable for data collection at a target depth of 2500m is determined using an interpretation structure compiled on the basis of available well data and 2D seismic survey data. The plan for siting shock points and receiving points is modified case by case as restrictive factors come to the surface (resulting from the complicated hilly terrain, presence of pipes for agricultural water, etc.). The peculiarities of seismic waves in the terrain are studied through the interpretation of the available well data and 2D seismic survey data for the construction of a 3D velocity model for the confirmation of the appropriateness of the plan for siting shock points and receiving points. Efforts are exerted through enhanced coordination with the contractor to acquire data so that a technologically best design may be won within the limits of the budget. The quality of the data obtained from this experiment is in general better than those obtained from previous experiments, yet many problems remain to be settled in future studies about exploration-difficult areas. 4 refs., 4 figs., 1 tab.

  17. Measurement results of BHTV logging at the geothermal well. 1; Chinetsusei ni okeru BHTV kenso no sokutei kekka. 1

    Energy Technology Data Exchange (ETDEWEB)

    Lin, S. [Geophysical Surveying and Consulting Co. Ltd., Tokyo (Japan); Nakanishi, S.; Shimizu, I. [Electric Power Development Co. Ltd., Tokyo (Japan)

    1997-05-27

    In association with excavation of the No. 135 steam producing well in the Onikubi geothermal power plant in Miyagi Prefecture, shapes of production zones and drilling-induced fracture (DIF) were acquired from the borehole televiewer (BHTV) data. The BHTV logging shoots sound waves onto well walls of wells filled with fluid and detects the reflection waves to investigate the state of the well walls. Vertical fracture with opening lengths from 2 to 3 m were found at depths of about 1232 m and 1312 m. Water run-off has occurred at a depth of about 1312 m during the excavation, to which these vertical fractures might have contributed possibly. In depths of about 1232 m and 1312 m, fractures inclining toward north-east direction and south-west direction are predominant. Some fractures in the depth of about 1333 m incline toward east-south-east direction and west-north-west direction. Fracture inclination azimuth in all of the present logging sections is predominantly in north-east direction and south-west direction. When the DIF is considered to show the maximum compression azimuth, the earth`s crust stress azimuth is generally in east-west direction, which crosses slightly obliquely with the running direction of the predominant fracture in this well. 1 ref., 7 figs.

  18. Feasibility study on introducing new energy systems into Asian villages; Asia sonraku ni okeru shin energy donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For improvement of living standards in unelectrified areas of Asia, the feasibility of new energy power generation systems was surveyed. The degree of electrification of local areas is different every country, and Thailand is ahead of other countries, while Laos and Cambodia are most unelectrified. Power supply of 100W/house seems to be adequate for local areas because of weather condition, housing situation and life-style. Economic support and education on electricity are necessary for poor areas. Although needs for new energy is increasing, the priority is given to industrial and urbanized areas because of cost and investment effects, and remote areas are dependent on grant- in-aid. Resources of photovoltaic, wind power and micro- hydraulic energies are abundant, however, selection of energy and verification of its usability are important, and the local energy density maps were thus prepared. In introduction of new energy, after selection of energy suitable for an area concerned, such geographical and social conditions should be surveyed as road condition, water rights, land utilization, economic support system, policy and intention of inhabitants. 76 refs., 68 figs., 91 tabs.

  19. Biomarkers in petroleum from sedimentary basins in Northeast Japan. Tohoku Nippon no taiseki bonchi ni okeru abura no biomarker

    Energy Technology Data Exchange (ETDEWEB)

    Sakata, Susumu; Kaneko, Nobuyuki; Suzuki, Noriyuki (Geological Survey of Japan, Tsukuba, (Japan) Shimane Univ., Shimane, (Japan). Faculty of Science)

    1990-01-01

    Study by biomarker was made of oil from sedimentary basin in Northeast Japan. The oil biomarker is a proof to directly verify the biological origin of oil and becomes an index to effectively evaluate the matureness of oil, type of original organic matter, migration of oil, influence of microbiological decomposition, etc. Both matureness and original organic matter indexes of both steroid and triterpenoid hydrocarbon were applied to both crude oil and condensate, produced in Northeast Japan. Condensate is higher in matureness than crude oil. While as for crude oil, some of crude oil from Akita-Yamagata basin is lower in matureness than that from Niigata basin. It is possible that Akita-Yamagata basin was earlier in primary migration period than Niigata basin. Oil from Niigata basin trends to be larger in contribution by terrigenous organic matter than that from Akita-Yamagata basin. In oil from Niigata basin, no systematic difference was recorded in original organic matter between crude oil and condensate. 26 refs., 4 figs., 1 tab.

  20. 1000m depth boring at Inagawa, Hyogo prefecture. 1. Overviews; Hyogoken Inagawamachi ni okeru 1000m boring chosa. 1. Gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Sato, T.; Kusunose, K.; Cho, A.; Tosha, T. [Geological Survey of Japan, Tsukuba (Japan); Kiyama, T.; Yamada, F. [Mitsui Construction Co. Ltd., Tokyo (Japan); Aizawa, T. [Sancoh Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    Various field experiments were carried out using a 1000m deep borehole at Inagawa town, about 10km north of the focus of the Hanshin-Awaji Great Earthquake and directly above the area where shallow earthquake activities have intermittently occurred. These experiments included stress measurement by hydraulic fracturing, hydrophone-aided VSP, permeability tests and observation of various types of logging. The laboratory experiments were also carried out, including measurement of various properties and stresses of the core samples. The stress-depth relationship, determined by the hydraulic fracturing method, shows that the stress gradient well coincides with the Western Japan standard at a depth up to 700m, whereas it is approximately twice as high as the standard at a depth of 946m, at which core disking and borehole break-out are clearly observed, and hence stresses conceivably concentrate locally. Orientation of the maximum horizontal compressive stress is E-W at a depth of around 600m, but greatly changes to NNW-SSE at a deeper position. 4 refs., 5 figs.

  1. Seismic reflection survey in Omama fan area, Gunma prefecture; Gunma Omama senjochi ni okeru hanshaho jishin tansa

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, K.; Kano, N.; Yokokura, T.; Kiguchi, T.; Yokota, T.; Matsushima, J. [Geological Survey of Japan, Tsukuba (Japan)

    1996-10-01

    Seismic reflection survey was performed for the Medial Tectonic Line, an important geological tectonic line in the Kanto plains, at Kushibiki district, Saitama prefecture in the north-western part of the Kanto plains. It was estimated that movements of the basement were different in the individual sides of the active fault. In this study, the seismic reflection survey was performed at the Omama fan area, Gunma prefecture, which is located at the north-eastern extension of the Kushibiki plateau, to grasp the structure of basement to the depth of about 1.0 s of return travel time, and the upper sediments. Two traverse lines passing Ota city, Kiryu city, and Nitta town were used. Southern part of the traverse line-1 was in the bottom land in the middle of Tone river, and northern part was in the Omama fan area. The ground surface along the traverse line was flat. Hachioji heights are the heights elongating in the NW-SE direction and having relative height of 100 to 200 m against the surrounding plain. Another traverse line-2 was set on the steep slope having relative height more than 100 m. The Brute stack time section of each traverse line was characterized by the gradient reflection surface AA of the traverse line-1. It was suggested that the AA or intermittent parts of reflection surfaces deeper than AA may relate to the tectonic lines in the more ancient geological ages. 2 figs., 1 tab.

  2. Fault analysis in the very shallow seismic reflection method; Gokusenso jishin hanshaho ni okeru danso kaiseki. 1

    Energy Technology Data Exchange (ETDEWEB)

    Nagumo, S.; Muraoka, S.; Kaida, Y.; Takahashi, T. [OYO Corp., Tokyo (Japan)

    1996-10-01

    To effectively use the very shallow seismic reflection for active fault survey, a method has been investigated by which fault structures can be appropriately reconstructed from the fault information detected in the original records. The first step of reconstructing the fault system from the travel time reflection curve was to grasp an outline of fault structure from the patterns of travel time curve observed in the original record. For the very shallow seismic reflection method, especially, the low velocity layers in a shallow part succeeding from the ground surface made the issue complicated. Then, the travel time reflection curves were calculated in the case of existing several horizontal reflection surfaces in the surface layer. The constant values, mean velocities to the depth at individual reflection surfaces were used for the approximation of velocities. The outline of fault structure was grasped from the observation of original record. Then, the structure was reconstructed from the travel time curves. When the mean velocity in the medium was known, reconstruction of the feature of reflection surfaces from the travel time curves could be determined by simple mapping. When the mean velocity was unknown, it was calculated using the reciprocal travel time from the common reflection surface for individual reflection surfaces. 7 figs.

  3. Fundamental study on the controlled thermal environment in enclosed spaces. Heisa kukan ni okeru netsu teki kankyo no kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Fukuchi, N.; Li, Q.; Nagano, H. (Kyushu Univ., Fukuoka, (Japan). Faculty of Engineering)

    1990-03-15

    For precise theoretical analysis of thermal environment in enclosed anisotropic turbulent air flow spaces such as air-conditioned cabins and reefer holds of ships, momentum and heat transport equations with diffusion terms due to buoyancy effects were derived for enclosed spaces including air layers with different temperatures due to slow circulating air flows. The air flow velocity and temperature distributions in enclosed spaces with induced air blows were calculated by a three-dimensional analysis based on a difference calculus (SMAC method) and finite element method, and those were also measured in a thermally insulated container type chamber with induced hot air blows, to verify the theoretical formulation. The relation between the temperature distributions and various controlling factors was clarified based on the measurement and calculation of thermal environment in temperature-controlled enclosed spaces. Detailed knowledge required to design thermally insulated spaces were thus obtained. 7 refs., 10 figs.

  4. Formation of liquid column for JEM-FPEF experiment; JEM ryutai butsuri jikken ni okeru ekichu keisei joken no kento

    Energy Technology Data Exchange (ETDEWEB)

    Kuwahara, K.; Makino, K. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Nakamura, T. [National Space Development Agency of Japan, Tokyo (Japan); Ota, K. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1999-11-01

    The Marangoni Convection Experiment with a liquid bridge is planned for the Fluid Physics Experiment Facility (FPEF) in the Space Station Japanese Experiment Module (JEM). The FPEF is under the development by NASDA and IHI. Microgravity and ground experiments have been conducted to investigate the conditions of formation and holding of the liquid bridge which are very important for the execution of the Marangoni Convection Experiment. The microgravity experiments were performed using parabolic flight in the MU-300 airplane. As a result, disk geometry, liquid sample supply condition, and the effects of thermocouple insertion/extraction for the stable formation and holding of the liquid bridge were clarified. (author)

  5. Interaction effects on combustion of alcohol droplet pairs; Alcohol kei nenryo niekiteki no nensho ni okeru kansho koka

    Energy Technology Data Exchange (ETDEWEB)

    Okai, K.; Ono, Y.; Moriue, O.; Shiba, S.; Araki, M.; Tsue, M.; Kono, M. [The University of Tokyo, Tokyo (Japan); Nomura, H. [Nihon Univ., Chiba (Japan). Coll. of Industrial Technology; Shiga, S. [Gunma University, Gunma (Japan). Faculty of Engineering

    2000-02-25

    Experimental investigation was conducted on two droplet-array combustion of methanol and methanol/dodecanol mixture fuels in microgravity. For methanol, effects of ambient pressure and droplet spacing were examined. Results show that the droplet lifetime decreases with increasing spacing at relatively low pressure and the droplet lifetime becomes independent of spacing at higher-subcritical and supercritical pressures. For methanol/dodecanol mixture, effects of pressure, fuel composition were investigated in terms of occurrence of disruption. Disruption of droplet during combustion was demonstrated both for single droplet and droplet pairs. (author)

  6. MT2-D inversion analysis in Kakkonda geothermal field; Kakkonda chinetsu chiiki ni okeru MT ho nijigen kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Yamane, K.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Miyazaki, S. [Japan Metals and Chemicals Co. Ltd., Tokyo (Japan); Uchida, T. [New Energy and Industrial Technology Development Organization, Tokyo, (Japan)

    1996-05-01

    Data, collected from an MT method-assisted survey conducted in the Kakkonda geothermal region in 1987, was re-examined, and a new structure was found. The review was carried out by use of a 2D analysis in the TM mode. According to the 1D analysis of 1987 and the geological data gathered then, it is estimated that the resistivity structure of this region runs in the northwest-southeast direction. A northeast-southwest traverse line was set for this analysis, orthogonal to the strike, and the impedance at each observation spot was caused to rotate to this direction across the whole range of frequency. Furthermore, in 1994-95, surveys were conducted using arrayed CSMT/MT methods. All these sum up to indicate that a high-resistivity region extends northwest in the southwestern part of the Kakkonda river but that there exists a low-resistivity region of several 10 Ohm m centering about the B traverse line. The high-resistivity region deep in the ground being the target of excavation in the Kakkonda region, to collect knowledge about this high-resistivity is important, and here the effectiveness of the 2d analysis has been verified. 5 refs., 11 figs.

  7. Remote reference processing in MT survey using GPS clock; MT ho ni okeru GPS wo mochiita jikoku doki system

    Energy Technology Data Exchange (ETDEWEB)

    Yamane, K.; Inoue, J.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Kosuge, S. [DRICO Co. Ltd., Tokyo (Japan)

    1996-05-01

    A report is given about the application of a synchronizing system using clock signals from GPS satellites to a remote reference method which is a technique to reject noise from the MT method. This system uses the C/A code out of the L1 band waves from NAVSTAR/GPS satellites. The new system was operated in MT method-using investigations conducted at China Peninsula, Aichi Prefecture, and Izu Peninsula, Shizuoka Prefecture, with the reference points placed several 100km away in Iwate Prefecture on both occasions. It was found as the result that it is basically possible to catch signals from the GPS at any place, that the signals are accurate enough to be applied to time synchronization for the MT method, and that the signals assure a far remote reference method with a separation of several 100km between the sites involved. The referencing process at high frequencies whose feasibility had been doubted proved a success when highly correlated signals were exchanged between two stations over a distance of several 100km. 5 refs., 9 figs.

  8. Magnetic constraints of basement structure offshore of western Kyushu, Japan; Kyushu seiho kaiiki ni okeru jiki ijo no kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Okuma, S.; Nakatsuka, T. [Geological Survey of Japan, Tsukuba (Japan); Ishihara, T. [Japan National Oil Corp., Tokyo (Japan)

    1996-05-01

    This paper describes the results from the qualitative analysis of magnetic anomalies offshore of western Kyushu and from an analysis by a three-dimensional two-layer model inversion. The analysis ranged from Kyushu on the east to Jeju Island on the west and from the southern part of the Korean Peninsula on the north to Tanegashima and Yakushima Islands on the south, namely, the area of 580km from east to west and 580km from south to north. The analytical data used was Magnetic Anomaly Map of Asia (GSJ and CCOP, 1994). In the qualitative analysis, a pseudogravity anomaly map and a pole gravity anomaly map were prepared from the total magnetic force anomaly map by means of a frequency filter operation. As a result, it was noted that two distinctive magnetic high belts existed in the margin of the Tunghai Shelf, extending from the sea area to the west of the Nansei Islands continuously to NNE, and being distributed transversely through the Goto sedimentary basin. Additionally, in the inversion analysis, it was demonstrated that the magnetic basement became shallow at the margin of the Tunghai Shelf north of latitude 31 degrees north, extending nearly in the NNE direction through west of the Goto Islands, west of Tsushima Island, and continuing to the southern coast of the Korean Peninsula. 6 refs., 4 figs.

  9. Introduction of research and development in Image Information Science Laboratory; Image joho kagaku kenkyusho ni okeru kenkyu kaihatsu no shokai

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-10

    This paper introduces research and development at the Image Information Science Laboratory. This is a joint industry-university research institution for the purpose of making a computer recognize human non-language information, expressing and transmitting it, with the research conducted at two centers, Kanto and Kansai. The following studies are being made at the Kansai research center: man/machine interface making natural communication possible between a man and a machine, with emphasis placed on visual information; sensing technology for measuring human activity, technology for analyzing/forming human sensitivity, and technology of expression; technology by which a work is done by a computer in place of a man and reproduced on the computer, with the skill transferred to a man; and development of a spatial expression media system such as a three-dimensional display device. The Tokyo research center is participating in the following projects: committee for promoting joint industry-university research and development of virtual reality (VR); joint industry-university research, development and implementation project of advanced VR; survey on physiological psychological effect in VR system and the like; and research and development of human media. (NEDO)

  10. Current status and future of floating structures at harbor. Kowan ni okeru futai kozobutsu no genkyo to tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, S. (Ministry of transport, Port and Harbour Research Inst., Tokyo (Japan))

    1991-02-25

    Considering that there are many maintenance plans now for floating structural facilities, problems concerning the plan and design of floating structures are extracted and a design manual is being prepared. The current states and future of those floating structures are outlined, and the summary of the safety precaution is explained referring to the design manual for the floating structures. Most of the current floating structures utilize ships. In many cases, they are used as restaurants, exhibition halls, museums, etc. The sites for those floating structures are calm sea areas where there is no direct action of waves from the open sea. For the safety of floating structures, design of the mooring facility is extremely important. Details which are not provided in the technical standards are given in the floating structure manual. The content of the manual is introduced. An examples of the design of mooring facility is introduced. 3 refs., 2 figs., 4 tabs.

  11. AC losses in parallel conductors (4). Frequency dependence; Chodendo heiretsu dotai ni okeru koryu sonshitsu (4). shuhasu izonsei

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H.; Nagasawa, M.; Kajikawa, K. [and others

    1999-11-10

    As a constitution method of superconductive conductor for large current capacity oxide alternating current, which moves at liquid nitrogen temperature, we proposed that it constitutes the parallel conductor using tapelike polycore line with rectangular cross section and conducts the transposition as well as the normal conduction equipment on the way of the winding process. In the report by last time, it was shown that the ac loss density was kept to the wire level by conducting the transposition in the optimum position. And, it was confirmed that that the frequency in which the additive ac loss with the slippage of the transposition position takes the peak changes was possible by the change of attenuation time constant {tau} which is decided by overall length L of the parallel conductor and contact resistance R of the double end. This time, frequency characteristics of the additive ac loss were examined more and more well informed. (NEDO)

  12. Evaluation of biodegradation of bioplastics in swa water. Kaisuichu ni okeru bio plastic no seibunkaisei no hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Doi, Y. (Tokyo Institute of Technology, Tokyo (Japan))

    1991-07-01

    Research and development have been pursued of plastic materials degradable in sea water and their application to the fishery material field in consideration of protection of the marine environment. Tests are conducted on degradation speed of bioplastics in sea water. Concerning a sample copolymeric polyester, by giving 4-hydroxy butyric acid, 1,4-butanediol, 1,6-hexanediol and {gamma}-a butyrolactone group to A.eutrophus, copolymeric polyester P (3HB-co-4HB), a mixture of molecular units of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) is fermented. Test results show that it degrades at the same speed, being independent of molecular structures of biopolyester and copolymerization composition, different from the case of degradation in soil. It is clarified that the microorganism which degrades biopolyester in sea water is streptomyces, a kind of actinomycetes. 3 refs., 5 figs.

  13. Function of nitrogen removal in wetlands; Shicchi ni okeru chisso jokyo kino (shicchi mokei wo mochiita joka shiken)

    Energy Technology Data Exchange (ETDEWEB)

    Hata, K.; Ishikawa, M. [Ministry of Agriculture, Forestry and Fisheries, Tokyo (Japan); Suzuki, M. [University of Tsukuba, Tsukuba (Japan)

    1996-04-01

    The use of wetlands in no-cultivation paddy fields was investigated as one of the natural purification functions in a rural district. The wetlands are covered with emergent plants such as a reed and rush, and other water plants and algae. These plants assimilate nitrogen and phosphorus for growth that are the source of water pollution. Filiform algae also have the acquisition capability of an SS component and improve the water purification function. As a biological water purification action, algae absorb carbon dioxide from underwater and release oxygen by photosynthesis. Microbes and plankton decompose and mineralize organic matter, and denitrifying bacteria denitrifies biologically. All algae and water plants absorb nitrogen and phosphorus. The water quality is purified as a physico-chemical action by adhesion, filtering, and sedimentation. To recognize the factor that is given to the purification capacity in wetlands, a nitrogen removal experiment was made using a wetland model, and the influence of the residence period, inflow nitrogen concentration, water temperature, and solar radiation was investigated. Since the test result is influenced by the daytime and nighttime or the quantity of solar radiation, each factor must be synthetically investigated throughout the year. 13 refs., 6 figs., 1 tab.

  14. Economic aspects of photovoltaic solar-hydrogen electric power; Taiyoko hatsuden ni okeru suiso chozo no yuyosei

    Energy Technology Data Exchange (ETDEWEB)

    Ihara, S.; Sugawara, H. [Nippon Institute of Technology, Tokyo (Japan)

    1997-06-01

    The photovoltaic solar-hydrogen power system (PVHS), in which water is electrolyzed by PV power, stored and inversely transformed into electric power by the fuel cell, is one of the electric power storage system different from the secondary cell. The economic feasibility of PVHS differs by a large margin according to regions. To elucidate the conditions which justify the introduction of PVHS, economical efficiency is calculated using a model in which solar radiation conditions and load pattern are simplified. The PV array output is adjusted by a rectifier, power is supplied to the load via an inverter, and hydrogen produced at a water electrolysis plant is stored in a storage tank. When the PV output is insufficient against the load, hydrogen gas is converted into power by the fuel cell and whole or a part of the load power is supplied via an inverter. The result of the calculation shows that the system is more advantageous than constructing a system interconnection and a backup power generation plant if consistency between the daily solar radiation pattern and power load pattern is satisfactory, particularly in the area with abundant solar radiation. 5 refs., 5 figs., 2 tabs.

  15. Analysis of flame propagation phenomenon in simplified stratified charge conditions; Tanjunkasareta sojo kyukiba ni okeru kaen denpa gensho no kansatsu

    Energy Technology Data Exchange (ETDEWEB)

    Moriyoshi, Y.; Morikawa, H. [Chiba University, Chiba (Japan); Kamimoto, T. [Tokyo Institute of Technology, Tokyo (Japan)

    1997-10-01

    Since the local inhomogeneity of mixture concentration inside the cylinder affects the combustion characteristics, a basic research on combustion phenomenon in stratified charge conditions is required. The authors have made experiments with a constant-volume chamber, which can simulate an idealized stratified charge field by using a removable partition, to obtain the combustion characteristics. Also, numerical calculations are made using some combustion models. As a result, the important feature that the combustion speed is faster in stratified condition than in homogeneous condition can be predicted by the two-step reaction model. 4 refs., 8 figs.

  16. Research on air intake an exhaust nozzle in HYPR project; HYPR project ni okeru intake nozzle no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Niwa, H. [Kawasaki Heavy Industries, Ltd., Kobe (Japan); Omi, J. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Kishi, K. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Murakami, A. [National Aerospace Laboratory, Tokyo (Japan)

    2000-02-05

    This paper describes the research on air intake and exhaust nozzle in HYPR (Super/Hyper-Sonic Transport Propulsion System) project. HYPR project adopts the concept of CCE (combined cycle engine) composed of a turbojet engine and a ramjet engine. The air intake for flight in a mach range of 0-5 adopts a shock wave system composed of 6 shock waves to keep a total pressure recovery more than 81% at Mach 3 and more than 51% at Mach 5 under the condition of minimum bleed air flow rate. Since stable operation, high profitability and high environment adaptivity are required for CCE at Mach 0-5, the exhaust nozzle with a high thrust efficiency (more than 95% at Mach 5, more than 97% at Mach 3), and its moving mechanism and cooling structure (for maximum gas temperature of 1900 degrees C) are adopted, satisfying ICAO standard on exhaust jet noise. Study was made on aerodynamics of the nozzle at Mach 3 and 5, and its moving mechanism and cooling structure. Further development is indispensable for SST in the 21st century. (NEDO)

  17. Making of composite type energy introduction models in cities; Toshi ni okeru fukugogata energy donyu model no sakusei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper made and studied simulation models in case of introducing new energy of composite type to cities. In the study, using a standard composition unit of city as a cluster, the compositional element was divided into 25 cells, which were divided into the residence superiority cell and the business superiority cell. The residence superiority cell was divided into highrise and lowrise. The calculation program is to simulate effects of introducing new energy such as the photovoltaic power generation, solar energy utilization, waste power generation, cogeneration, and unused energy like river water and waste water. Using the program, the analysis of sensitivity was conducted concerning how the outputs will change according to differences in energy consuming composition in the urban area. The calculation was conducted concerning local cities of the warm area, local cities of the cold area, local cities of the subtropical area, residence/working-place neighboring core cities in the warm area, central areas of large cities of the warm area, and new towns of the warm area. 28 figs., 27 tabs.

  18. Study of evaluation for grouting effect in a borehole; Yakueki chunyu koka hyoka gijutsu ni okeru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, H.; Matsuo, T. [Fukuoka Municipal Transportation Bureau, Fukuoka (Japan); Yamauchi, Y.; Imanishi, H. [Osaka Soil Test, Osaka (Japan)

    1996-10-01

    For the foundation improvement works by grouting in a borehole, evaluation of grouting effect is one of the most important management items. The grouting design and works are sometimes reconsidered depending on the evaluation of grouting effect during the test injection. The purpose of the evaluation of grouting effect is to grasp the range of improvement and consolidation after the injection, and to judge and estimate the strength and permeability of the consolidation part. This paper describes the judgment method of the strength using PS logging results and borehole televiewer (BHTV) logging results. The reflection intensity (Ir) by the BHTV logging increased after the grouting, which showed a same tendency as that using S-wave and P-wave velocities (Vs and Vp) before and after the grouting. This was considered to demonstrate the grouting effect. A relation was obtained between the Vs, Vp and Ir before and after the grouting, which was expressed by following equation. Ir=0.143{times}Vs-70=0.093{times}Vp-110. The relation with the dynamic elastic coefficient (Ed) was also obtained as follow; Ir=0.0013{times}Ed. 9 figs.

  19. Change of unit skeletons during an artificial coalification; Jinko sekitanka katei ni okeru tan`i kokkaku kozo no henka

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, Y.; Miki, Y.; Hayamizu, K. [National Institute of Materials and Chemical Research, Tsukuba (Japan); Okada, K. [Coal Mining Research Center, Tokyo (Japan); Suzuki, Y. [Geological Survey of Japan, Tsukuba (Japan)

    1996-10-28

    In order to obtain knowledge about formation and growth of condensed ring structure in a coalification process, discussions were given on product skeleton structure by using hydrogenation and hydrocracking of heated cellulose. In underwater heating of cellulose, reaction of dehydration has occurred at 200{degree}C or lower, that of decarbonation at 250{degree}C or higher, and that of demethanizing at 300{degree}C, resulting in production of a dark-brown coal-like substance. The substance has lower H/C value and higher O/C value than coal. As the underwater heating temperature rises, the hydrogenation reactivity of the heated substance decreases, and so does the ratio of conversion into toluene solubles. These phenomena are related to strength of cross-linking bond between unit skeleton structures. A substance heated at an underwater heating temperature of 200{degree}C turns toluene-soluble almost completely even during the hydrogenation reaction (350{degree}C for 2 hours), but the soluble product decreases at underwater heating temperatures of 250 and 300{degree}C. However, soluble product of more than 90% was obtained when hydrocracking (at 425{degree}C for one hour) was performed. The toluene-soluble product in the heated substance is only 50% when the underwater heating temperature reaches 350{degree}C even if the hydrocracking is carried out. 3 refs., 5 figs.

  20. Effects of films corroded in fatigue of single copper crystals. Dotankessho no hiro ni okeru fushoku himaku no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Tsuji, I.; Miyamoto, H.; Omaki, T. (Doshisha Univ., Kyoto (Japan)); Hashimoto, T. (Kyoto University, Kyoto (Japan))

    1998-05-21

    A fatigue test was performed on single copper crystals having a single slide system to discuss effects of corroded films on fatigue behavior of the crystals. The experiment used single crystals fabricated from high-purity copper poly-crystals by using the Bridgman method. Crystalline azimuth of the single crystals was analyzed and controlled by using the X-ray rear reflection Laue method. Sodium nitrite aqueous solution was used as a corroding solution. The fatigue test performed repetitive compression/tensile tests under constant plasticity strain amplitude after corrosive films are generated all over a test piece. The test was terminated when cracks developed causing stress to decrease largely. The following conclusions were obtained as a result of the discussions: hardening rate increases during the initial stage of hardening under presence of the corrosive films; no accelerated formation of PSBs occurs under high plasticity strain amplitude, but it occurs under low plasticity strain amplitude; and shape and change in displacement-corrosion current loop under the presence of the corrosive films can be explained by combining several kinds of current increase models. 3 refs., 5 figs., 1 tab.

  1. Study on the effect of measurement points upon reduced added mass matrix; Shukusho fuka shitsuryo matrix ni okeru kansokuten no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Funaki, T.; Hayashi, S. [Osaka University, Osaka (Japan). Faculty of engineering

    1996-12-31

    It is known in estimating vibration characteristics of a ship that fluid range affects largely a structure. A parameter calculation was performed on node vibration in the vertical direction of a rotating elliptic body such as a ship to investigate the effect of an arranging method of the measurement points upon the result of the analysis. As a result, it is thought that equivalent interval arrangement of 21 measurement points would be sufficient in a lower order side mode of vibrations with less than four nodes. An analysis of calculations performed by arranging measurement points in experimental measurement points revealed that analysis accuracy would not increase even if the number of measurement points is increased if it is done so without considering rotation vector. An experiment was carried out with the number of measurement points increased to verify the above fact, with which the analysis was verified correct. Therefore, as has been forecasted in the previous report, the cause for the analysis accuracy deterioration in a high order mode may be estimated as the effect of the rotation vector. However, since it is not the situation that an analysis considering the rotation vector has been conducted, it cannot be concluded yet that the effect of the rotation vector is the sole cause. 4 refs., 14 figs., 7 tabs.

  2. Evaluation of dynamic compression modulus of flexible polyurethane foams by dynamic viscoelastic measurements; Nanshitsu polyurethane foam ni okeru doteki nendansei sokutei ni yoru doteki asshuku danseiritsu no hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, H.; Hasegawa, T. [Nagoya Municipal Industrial Research Inst., Aichi (Japan)

    1998-09-15

    The relation between dynamic compression modulus and hardness and repulsive elastic modulus of flexible polyurethane foam was investigated by viscoelasticity measurement. The dynamic compression modulus varies depending on the initial shrinkage. In a larger shrinkage region, its increase was remarkably large. The dynamic compression modulus is positively correlated with the hardness, but it is reversely correlated with the repulsive elastic modulus. The dynamic compression modulus can be effectively used for evaluating the product quality. A simple two-dimensional model is proposed for flexible polyurethane foam. To the model, the finite element method (FEM) employing the plane stress element was applied. The calculated Young modulus from the model agrees well with calculated values of Thomas-Gent and of Lederman. However, it was significantly larger than the dynamic modulus. A FEM analysis employing plane rahmen element considering the skeleton bending was also performed. 15 refs., 8 figs., 1 tab.

  3. Basic studies on application of vegetable factory in Tohoku region; Tohoku chiho ni okeru yasai kojo no jitsuyoka ni kansuru kiso kento

    Energy Technology Data Exchange (ETDEWEB)

    Okano, T.; Terazoe, H.; Shoji, K.; Nakaya, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Tanaka, M.; Miura, K. [Tohoku Electric Power Co. Inc., Sendai (Japan)

    1995-08-01

    To construct vegetable factories in the Touhoku region, items of information have been collected with respect to items to be cultured and market conditions. Experimental discussions have also been given on new culture items and methods for utilizing snow. Using the results of investigations on the market conditions and weather environments, the following three kinds of spicy vegetables were selected: water cress which grows in about 46 culture days after seeding and in about 36 days by herbaceous cutting to a harvest of about 700 g/m{sup 2}, green perilla which grows in about 85 culture days to a number of salable leaves of 100 per stock, with an average leaf area of about 55 cm{sup 2}, and trefoil which grows in about 56 culture days to a harvest of about 5100 g/m{sup 2}. According to a storage experiment using snow, lettuce packed with snow in a box retained at a temperature of 5{degree}C and a humidity of 100%, pre-cooled for one day and then stored for six days in a refrigerator at 5{degree}C presented very little decrease in fresh weight and no decrease in freshness. The same result was obtained also for the Sunny Lettuce. 9 refs., 19 figs., 9 tabs.

  4. Results of geophysical survey on Hanaore-fault in the Kyoto urban area; Butsuri tansa ni yoru Kyoto shigaichi ni okeru Hanaore danso chosa

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioka, T. [Geological Survey of Japan, Tsukuba (Japan); Echigo, T. [Osaka Soil Test, Osaka (Japan); Toshioka, T.; Matsubara, Y. [Oyo Corp., Tokyo (Japan)

    1997-05-27

    This paper reports results of gravity survey and seismic survey using the shallow bed reflection method to identify distribution of the Hanaore fault in the Kyoto urban area. In the gravity survey, level differential structure caused by the fault was identified as an abrupt change in Bouger anomalous values. The continuity therefrom made the estimation possible on existence and positions of such faults as the Hanaore fault belonging to the Hanaore fault system, the Shishigaya fault, the Kaguraoka fault, and the Okazaki fault. The estimation as a result of the gravity survey include the following findings: the Hanaore fault runs from south of the Yoshidayama in the south-north direction; the distribution of the Okazaki fault has a level differential structure falling on the east side; the structure shows low Bouger anomaly distribution; and this area forms a rift valley belt. In the seismic survey using the shallow bed reflection method, no distinct reflection plane considered as the basement was verified because of influence from urban area noise. However, it was possible to estimate such an underground structure as a monoclinal fold from shapes of the reflection plane and the distribution depths. 7 refs., 5 figs.

  5. Assignment/reassignment agreement for the offshore drilling rig acquisition (case history in the Kingdom of Cambodia); Cambodia ni okeru kaiyo kussaku rig no assignment keiyaku ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Y. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan)

    1997-09-01

    Acquisition is introduced of a rig by Cambodian Petroleum Exploration Co., Ltd. (CAMPEX) under an assignment/reassignment agreement. Such an agreement is defined as a contract under which an operator temporarily loans from another operator a drilling contract the latter concluded with a drilling contractor or service contracts the same concluded with various service contractors. Enterprise Oil Exploration Ltd. (Enterprise) had a contract to drill five wells in Cambodian and Vietnamese sea areas using a drill ship owned by a Canadian drilling contractor, but Enterprise had to keep the rig out of service due to lack of a drilling plan for one well that had been under an optional contract. Negotiations were conducted with Enterprise, and an assignment/reassignment agreement was signed for Enterprise to transfer to CAMPEX the rights and duties for the said one optionally contracted well. Thanks to the agreement, rig deployment and recovery expenses at a remote location were reduced for an extensive reduction in the drilling cost. 3 figs., 3 tabs.

  6. Necessity of irrigation for revegetation on reclaimed land with fly ash. Sekitanbai umetatechi ni okeru ryokuka no tameno kangai no hitsuyosei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Sekiyama, Tetsuo; Kozakai, Kazuki; Okabe, Katsumi.

    1989-02-01

    In view of the growing importance of revegetation measures of a reclaimed land with fly ash discharged from a coal burning thermal power plant, a study was made on necessity of irrigation in case of the positive execution of the above revegetation. This is a report of the above study. The conclusions of the study are as follows: (1) Comparing the available moisture amounts in terms of volume percentage of moisture, about 36% is for fly ash and about 34% for volcanic ash soil, but when fly ash is solidified, the above figure for fly ash becomes about 90% of that for volcanic ash soil. (2) The maximum water infiltration capacity of fly ash is 1/10-1/50 of that of volcanic ash soil and the surface run-off is much. The furrow or drip irrigation system is suitable. (3) The evaporation in fly ash is almost same as that in volcanic ash soil and the designed duty of water irrigation is considered to be 7-8mm/day (in case of cultivation of tangerine and pasture). (4) In case when the above reclaimed land is covered with volcanic ash soil, an aquifer is observed at the boundary layer between the surface soil coverage and the land. Hence draining measures such as underdrainage systems are desirable from the viewpoint of the growth of plants. 8 refs., 8 figs., 2 tabs.

  7. Results of photovoltaic power generation system operation in Tokyo Electric Power Company; Tokyo Denryoku ni okeru taiyoko hatsuden setsubi no unten jisseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, H.; Itokawa, K. [Tokyo Electric Power Co. Inc., Tokyo (Japan)

    1996-10-27

    A report was made on the measurement of data and the results of the analysis at 14 sites of photovoltaic power generation facilities operated under system interconnection by Tokyo Electric Power Company. This type of system is provided in 40 sites as of the end of fiscal 1995, generating 479kw. The items measured were the generated electric energy at all 14 sites, and the quantity of solar radiation, outside air temperature, panel temperature, etc., at limited sites; and the capacity of each equipment, azimuth and inclination of the panel were also recorded simultaneously. Hourly values were used for the analysis. Five minute values were utilized, however, in the examination of the cause of lowered output and in the situation recognition of the influence of the shade or the change of weather. The utilization factor of the facilities was in the average 10.8% in fiscal 1994 and 10.7% in fiscal 1995. The factor decreased slightly unless the panel azimuth faced due south. The utilization factor at the panel inclination of 35 degrees and 45 degrees showed both 10.4% through the year making no difference. The system seemed to show no overwhelming possibilities in coping with electric power demand. The reason was that deviation existed for 2 hours or so in the peak and that reliability was low as basic power facilities. However, it was determined that the system be continuously examined in future. 9 figs., 1 tab.

  8. Study on behavior of organic substances in waste at landfill waste disposal site. Haikibutsuchu yukibutsu no umetate shobunjonai ni okeru kyodo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ito, H.; Inoue, Y. (Osaka City Institute of Public Health and Environmental Science, Osaka (Japan))

    1990-10-29

    The report proposes a method to analyze the stabilization proces of waste based on measurements of the carbon content in waste sampled at a disposal site and in boring core samples. Waste transported to the disposal site is spread over a 50-ton stockyard and stirred by two power shovel cars, and 30-50 kg samples are collected for composition analysis. The waste sampled is weighed, dried and broken down into different components, namely, paper, fiber, wood/grass, plastics, miscellaneous articles, glass/stone, procelains, steel, non-ferrous metals, followed by composition analysis. Boring core samples are taken at every 80 cm depth, subjected to weighing and drying, and broken down in a similar way. Analysis is performed for total carbon content, organic carbon content and inorganic carbon content. Results show that there are significant differences among the three carbon contents, suggesting that this method can serve for rough estimation of the degree of decomposition of waste. It is also indicated that gas generation rate can be roughly estimated from a measured organic carbon content. 5 refs., 4 tabs.

  9. Questionnaire investigation for the earthquake in Honjo city and Yazawa city, Akita Prefecture; Jishin ni kansuru ishiki chosa (Akitaken Honjoshi oyobi Yuzawashi ni okeru anketo kara)

    Energy Technology Data Exchange (ETDEWEB)

    Nogoshi, M. [Akita University, Akita (Japan). College of Education; Kabutoya, S.

    1996-05-01

    Consciousness for the earthquake was investigated by questionnaire surveys made in Honjo City and Yuzawa City, Akita Pref. in October 1995 twelve years after the Nihonkai Chubu Earthquake (M=7.7) in May 1983. The survey was conducted in terms of 27 items including personality, memory, knowledge/interest, psychology/action, mental attitude/preparations, wishes for researchers and administration, etc. Also included were the items on the Great Hanshin-Awaji Earthquake and the earthquake blank areas. The number of distributed questionnaires and the recovery rate of them are 1500 and 79.2% in Honjo City, and 1700 and 84.7% in Yuzawa City. From the survey, it was found that people have a lot of knowledge of and high interest in the earthquake and well remember it, and a lot of people know of tsunami, liquefaction phenomena, and the earthquake blank area. Further, they are afraid of earthquakes and think of their actions to be taken in case of earthquake. However, most people are little prepared for earthquakes. Important future subjects were suggested for the study of disaster prevention measures. 13 figs.

  10. On the muscle activity control in the hierarchy motor systems. Hierarchy undo system ni okeru kin no kassei seigyo ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Akiba, M.; Miyamoto, Y. (Osaka Industrial University, Osaka (Japan). Faculty of Engineering)

    1991-10-31

    Excitory impulses for motor systems are controlled by the psychophysiological nervous systems in the body either autonomically or voluntarily. Involved in the voluntary control loop are motor cortex, basal gangalia, thalamus, cerebellum, etc. The purpose of this study is to confirm whether it is possible to reduce or emphasize the muscle contraction voluntarily through electromyogram (EMG) feedback training. EMG can indicate the excitory impulses of motor units. In the experiments, electrodes were placed on the skin above muscles. A significant reduction effect was observed for subjects trained in relaxation of the forehead musculature through EMG feedback. Results of the experiments suggested that biofeedback training for relaxation of the forehead tensional muscle might be effective in eliminating muscle contraction, and that feedback training for activation of damaged muscles might be effective in emphasizing muscle contraction. 4 refs., 9 figs.

  11. Design and construction of landslide preventive construction at Yamasubara hydroelectric power plant site. Yamasubata hatsudensho chiten ni okeru jisuberi taisaku koji no sekkei seko ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Takase, H.; Ito, M.; Sakata, M. (The Kyushu Electric Power Co. Inc., Fukuoka (Japan))

    1993-07-30

    This paper reports the design and construction of landslide preventive construction at the site of the Yamasubara hydroelectric power plant (with a maximum output of 40,700 kW) and the result of slope stability verification after completion of the construction. The moderate slope on top of the primary slide has sands presumed to be colluvial deposit distributed with a depth of 10 m or more, where occurrence of a secondary slip was feared as triggered by the primary slide. The power plant protective constructions consisted of concrete walls to protect the entire power plant including buildings, and falling stone protective fences installed around the surge tanks. The temporary measures were so set that groundwater levels are lowered to a level that can assure the slide safety factor of 1.0 or more by means of drain boring using the down-the-hole hammer type. The permanent protective construction used rock anchors that are superior in constructability and economy. The stability of sliding slope faces was verified to confirm effects of the protective constructions. The verification included observations of groundwater level behavior, water well-up from drain holes, and movements in the slopes. The result showed that the protective constructions have give sufficient effects. Continued slope stability control is important. 16 figs., 7 tabs.

  12. Investigational study on the development, production and wide spread of welfare apparatus in north Europe; Hokuo ni okeru fukushi yogu no kaihatsu seisan fukyu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of grasping the present situation of the development/production/spread of welfare apparatus in north Europe, an investigation was conducted paying visits to Sweden and Denmark. Basically in the Swedish policy for handicapped persons, disablement is defined not only as features which belong to each individual, but as problems arising when the environment surrounding each individual touches one another. Moreover, characteristics of their policies on welfare apparatus are that major welfare apparatus can be provided for the disabled free of charge, and that the government and public organs play a major role in each step of the development, evaluation, distribution and provision of welfare apparatus. Features of the market of welfare apparatus are that users and buyers of the apparatus are different persons, that a public corporation called SUB participates in determining selling prices, etc., and that the market reflects needs and requests from users comparatively naturally. The needs for welfare apparatus at the Research Institute of Handicapped Persons are grasped through opinion exchanges with groups of handicapped persons or information exchanges with the technical aid center. 3 refs., 11 figs., 10 tabs.

  13. Pseudo-random data acquisition geometry in 3D seismic survey; Sanjigen jishin tansa ni okeru giji random data shutoku reiauto ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Minegishi, M.; Tsuburaya, Y. [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    Influence of pseudo-random geometry on the imaging for 3D seismic exploration data acquisition has been investigate using a simple model by comparing with the regular geometry. When constituting wave front by the interference of elemental waves, pseudo-random geometry data did not always provide good results. In the case of a point diffractor, the imaging operation, where the constituted wave front was returned to the point diffractor by the interference of elemental waves for the spatial alias records, did not always give clear images. In the case of multi point diffractor, good images were obtained with less noise generation in spite of alias records. There are a lot of diffractors in the actual geological structures, which corresponds to the case of multi point diffractors. Finally, better images could be obtained by inputting records acquired using the pseudo-random geometry rather than by inputting spatial alias records acquired using the regular geometry. 7 refs., 6 figs.

  14. Study on the development of flood control techniques in the Niigata plain. Niigata heiya ni okeru chisui gijutsu no henkan ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Chino, Y. (Nigata Univ., Nigata (Japan). Graduate School); Okuma, T. (Nigata Univ., Nigata (Japan). Faculty of Engineering)

    1992-01-20

    There are 14 floodways built from the mid-Tokygawa era up to now in the Nigata Plain and the most important and large-scaled one in these is the Okozu floodway. The plan of the Okozu floodway which is playing its wonderful role to control flood may be considered to begin in 1730s, Edo era, but it was not practiced by Tokugawa. The necessity for the Okozu floodway to control flood in the Nigata Plain had been confirmed by the floods happening continuously in the 1880s. The excavation construction was begun in 1909, about 200 years after the plan. The work started by using modern flood control techniques and the floodway came into practical use in 1922. In the present paper, the history of flood control in the Nigata Plain from 1730s to the modern times has been traced. Using the results, the development of the modernization of flood control technique centered at weirs and gates has been studied. 44 refs., 5 figs., 1 tab.

  15. Various discussions on feminine adaptive capability in high-tech labors. (2). Haiteku rodo ni okeru josei no tekiono ni kansuru shokento. (2)

    Energy Technology Data Exchange (ETDEWEB)

    Jindai, M.; Miyake, S.; Hataya, T.; Sato, N.; Matsui, M.; Matsumani, M. (Univ. of Occupational and Environmental Health, Kitakyushu (Japan). Institute of Industrial Ecological Sciences)

    1991-01-01

    The Japanese industrial society is transforming into a post industrial society, accompanying a noticeable orientation to an information society as a result of introduction of the highly advanced technologies (hi-techs) and a rapid change in the labor structure as a result of more entry of women into the society. Therefore, a study was made on the contacts with the hi-techs of women in their labor scenes through an image survey and two kinds of experiment. One of the experiments was conducted on their work burdens and work adaptability when female workers manipulate industrial robots. Another experiment was on effects of feminine physiological periods on image judging work using as a model an inspection work that uses a CRT. As a result, it was revealed that the degree of friendly feeling in female workers toward hi-techs is affected largely by operating duration of hi-tech devices. The result of work and the degree of skillfulness in robot manipulations were higher in men than in women. Very little effects were observed on the feminine physiological periods giving on the image judging work. 36 refs., 5figs., 2 tabs.

  16. Electromagnetic spectrum caused by partial discharge in air in high voltage substations; Kakushu hendensho ni okeru kichu gaibu noise ni yoru denjiha spectrum

    Energy Technology Data Exchange (ETDEWEB)

    Yamashita, H.; Kato, T.; Hayakawa, N.; Hikita, M.; Ueda, T.; Okubo, H. [Nagoya University, Nagoya (Japan)

    1995-09-20

    We have been investigating characteristics of electromagnetic spectrum for partial discharge (PD) diagnosis systems for SF6 gas insulated switch gears (GIS). We measured noise spectrum in air at three different types of high voltage substations 550 kV open-air insulation substation, 550 kV open-air GIS substation and 275 kV underground GIS substation. A biconical antenna acting in a frequency range from 30 to 300 MHz was placed at a few meter away from GIS or gas circuit breaker (GCB) in the substations. From the experimental result, we obtained the average gain Ga of electromagnetic spectrum at each frequency in the substations. Next, we discussed the relationship between Ga and atmospheric conditions using an empirical formula of PD inception electric field Ec. As a result, we found the inverse proportionality of Ga against Ec which was determined by the temperature, pressure and radius of high voltage overhead conductors. We also investigated the relationship between PD pulse and the emitted electromagnetic spectrum from fundamental experiment for a needle-plane electrode configuration. Finally, we introduced `equivalent charge: qe` for substation, and concluded that the charge magnitudes of the 550 kV open-air insulation substation were about 7 times larger than those in the open-air GIS substation. 12 refs., 11 figs., 2 tabs.

  17. Analysis of the pressure response of high angle multiple (HAM) fractures intersecting a welbore; Kokeisha multi fracture (HAM) kosei ni okeru atsuryoku oto kaiseki ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Ujo, S.; Osato, K. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan); Arihara, N. [Waseda University, Tokyo (Japan); Schroeder, R.

    1996-05-01

    This paper reports pressure response analysis on wells piercing a high angle multi (HAM) fracture model. In this model which is defined on a three-dimensional space, a plurality of slanted fractures intersect with wells at high angles (however, intersection of fractures with each other is not considered). With respect to the pressure response analysis method using this model, the paper presents a basic differential equation on pressure drawdown and boundary conditions in the wells taking flows in the fractures pseudo-linear, as well as external boundary conditions in calculation regions (a reservoir spreads to an infinite distance, and its top and bottom are closed by non-water permeating beds). The paper also indicates that results of calculating a single vertical fracture model and a slanted fracture model by using a numerical computation program (MULFRAC) based on the above equations agree well respectively with the existing calculation results (calculations performed by Erlougher and Cinco et al). 5 refs., 6 figs.

  18. Future subjects on earthquake research in the Geological Survey of Japan; Chishitsu chosasho ni okeru jishin ni kansuru chosa kenkyu no kongo

    Energy Technology Data Exchange (ETDEWEB)

    Kinugasa, Y. [Geological Survey of Japan, Tsukuba (Japan)

    1998-03-01

    For the study of earthquake occurrence potentials attributable to active faults, etc., researches are being made concerning the assessment of hazard due to active faults, monitoring of underground water, explanation of fault shapes and rock fracture mechanism, geological surveys, and the development of methods for evaluating active faults in the sea. As the results, active fault structural charts have been compiled; underground water monitor data have been collected; relations have been disclosed between the occurrence of plural events, change in the number of events, and the sectional shapes of faults, these thanks to fault simulation using rock specimens; part has been completed of geological maps; profiles have been obtained through application of a high-resolution sound source-aided seismic reflection method to active faults in the sea; and a 2-dimensional extensive distortion analysis program has been substantiated. Studies in the future will deal with the disclosure of the history of activities of active faults, paleoseismological surveys, establishment of methods for evaluating the activity of active faults in the sea and for analyzing earthquake-produced sediments, development of technologies for exploring seismic bedrocks in the flatland, preparation of geological charts for observation-enhanced areas and monitoring of underground water in the same, and the basic research into the process of earthquake occurrence

  19. Experimental studies on performance of tandem hydrofoils in high speed regions; Kosokuiki ni okeru tandem suichuyoku no seino ni kansuru jikkenteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Nakatake, K.; Oda, K.; Kataoka, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Okada, S. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Mizuno, S. [Hitachi Zosen Corp., Osaka (Japan)

    1996-10-01

    With an objective to clarify basic performance of hydrofoils, a towing experiment was carried out on single hydrofoil and tandem hydrofoils, whose results are reported in this paper. In the experiment, the tandem hydrofoils are supported on two stays on the left and right sides, and the whole lifting power and the whole drag including those of the stays were measured by using strain gauges placed on four plate springs. Results of the experiment may be summarized as follows: in the case of the single hydrofoil, the lifting power constant varied as a result of strong impact on free surface as the shallower the hydrofoil, but corresponds to the size of the lifting power coefficient in high speed regions; in the case of the tandem hydrofoils, the smaller the submersion depth, the effects grew larger on the lifting power coefficient and the drag coefficient, similarly to the case of the single hydrofoil; and the lifting power coefficient for the leading hydrofoils changes very little as a result of change in horizontal distance between the tandem hydrofoils, but the lifting power coefficient of the rear hydrofoils vibrates due to influence from the leading hydrofoils, with the peak of the value thereof transferring to the higher speed side as the horizontal distance increases. 3 refs., 10 figs., 2 tabs.

  20. Magnetic behavior of HTS bulk in Ac Magnetic Field; Koryu jibachu ni okeru chodendo barukutai no furumai ni kansuru kiso shiken

    Energy Technology Data Exchange (ETDEWEB)

    Oyama, T.; Susa, T.; Tsuda, M.; Ishiyama, A. [Waseda Univ., Tokyo (Japan); Kohayashi, S.; Haseyama, S. [Dowa Mining Co., Ltd., Tokyo (Japan)

    1999-11-10

    As example of the utilization in applying the high-temperature superconductivity bulk body to electrical machinery and apparatus, by magnetizing, the trial used as a permanent magnet has been made the bulk body. However, a capture magnetic flux after the magnetizing of the bulk body receives the effect from the externally applied magnetic field and changes. Therefore, it is considered that that the effect from the variable magnetic field is grasped becomes indispensable for the design of the bulk body application equipment. Then, the result of testing the magnetization characteristic, especially characteristics for frequency and peak value of alternating current external magnetic field, is reported. (NEDO)

  1. Instability of magnetic fluid surface under horizontal non-uniform alternating magnetic field; Kaimen ni heikona hiichiyo koryu jibaka ni okeru jisei ryutai kaimen no antei genkai

    Energy Technology Data Exchange (ETDEWEB)

    Mai, J. [Tokyo Institute of Technology, Tokyo (Japan); Okubo, M. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering; Ishibashi, Y. [Chiba Polytechnic College, Chiba (Japan); Oshima, S.; Yamane, R. [Tokyo Institute of Technology, Tokyo (Japan). Faculty of Engineering

    2000-02-25

    Stability of the surface of a magnetic fluid under a horizontal non-uniform alternating magnetic field is investigated experimentally and analytically. Several modes of interfacial waves of the same frequency as that of the applied magnetic field are observed, and the critical strength of the magnetic field at each frequency were obtained. The linear stability theory shows that the system is destabilized with the increase in the magnetic susceptibility and the gradient of the magnetic field, which is in accord with the experimental result, The iron nitride magnetic fluid, which is newly developed and has very high susceptibility and magnetization, was tested under the same condition as W-35 and HC-50. The small disturbance occurred even at very weak magnetic field, and the steady wave was formed in the uniform magnetic field. (author)

  2. Investigational study of the CO2 balance in high temperature CO2 separation technology; Nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    An investigational study was conducted to clarify the adaptable environment and effectivity of technologies of high temperature separation/recovery/reutilization of CO2. In the study, data collection, arrangement and comparison were made of various separation technologies such as the membrane method, absorption method, adsorption method, and cryogenic separation method. With the LNG-fired power generation as an example, the adaptable environment and effectivity were made clear by making models by a process simulator, ASPEN PLUS. Moreover, using this simulator, effects of replacing the conventional steam reforming of hydrocarbon with the CO2 reforming were made clear with the methanol synthesis as an example. As to the rock fixation treatment of high temperature CO2, collection/arrangement were made of the data on the fixation treatment of the CO2 separated at high temperature into basic rocks such as peridotite and serpentinite in order to clarify the adaptable environment and effectivity of the treatment. Besides, a potentiality of the fixation to concrete waste was made clear. 57 refs., 57 figs., 93 tabs.

  3. Region associated Energium Park at Noshiro Thermal Power Palnt. Noshiro karyoku hatsudensho ni okeru chiiki kyoseigata 'Energium Part' ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Aonuma, M.; Sakurai, Y. (The Tohoku Electric Power Co. Inc., Sendai (Japan))

    1993-07-30

    This paper introduces the plan outline for a publicity related facility (Energium Park) utilizing waste heat from the Noshiro Thermal Power plant (with two units each with an output of 600,000 kW). The facility has the entire area divided into four zones, of which nuclear facility comprises a tropic botanical garden and a publicity pavilion. Both facilities are integrated in a centrally located dome building. Arranged around the dome are the adventure square for children to play, the sports square and the Noshiro Nebunagashi (a folk performing art) pavilion. The publicity pavilion has an exhibition hall and a culture hall (a multi-purpose image hall) arranged on both sides inside it. Heat supply for heating the tropic botanical garden utilizes waste heat from the power plant. Hot water is made from steam after power generation using heat exchangers and supplied by heat pumps according to the plan. The tropic botanical garden adopts a mosque-shaped dome of aluminum-trussed structure. The dome can install ventilation windows on its top to provide better ventilation efficiency, and is harder for snow to accumulate than on ordinary type domes. 2 figs.

  4. Study on recent research trends in the chemical fields; Kagaku bun`ya ni okeru saikin no kenkyu doko ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This research is conducted to search study themes of chemistry expected towards the 21st century. The complex compound in the fundamental chemistry field and the bio-medical materials in the applied chemistry field are taken up. Bio-medical materials are used for the restoration, rehabilitation, and treatment of the organ and the improvement of its functions. For implants such as hearts, anti-thrombin and anti-calcium precipitation effects and high endurance are required. In this field, special copolymers and bio-membrane-emulating surfaces are studied. For artificial organs, hybrid type materials combining cells, and physiologically active and artificial materials are also studied. There are studies on the missile therapy of drugs and DDS (drug delivery system). The complex compounds contain metallic elements, such as Fe, Mn, Co and Cu, and groups known as ligands which combine these metal elements. They can have a variety of stereo-structures and physical properties. They also exhibit a diversity of functions including electron donor bonding, molecular recognition, chemical substitution, and pharmaceutical activity. These features open up a promising potential for their prospective use as physiologically active substances, cancerostats, new materials, artificial photosynthesis, memory elements, and complex catalysts. 88 refs., 35 figs., 6 tabs.

  5. Coal liquefaction in early stage of NEDOL process 1t/d PSU; 1t/d PSU ni okeru ekika shoki hanno ni kansuru kento

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, K.; Kawabata, M.; Mochizuki, M.; Imada, K. [Nippon Steel Corp., Tokyo (Japan); Nogami, Y.; Inokuchi, K. [Mitsui SRC Development Co. Ltd., Tokyo (Japan)

    1996-10-28

    To investigate the behavior of coal liquefaction reaction in early stage as a part of studies on the coal liquefaction characteristics using NEDOL process 1 t/d process supporting unit (PSU), coal slurry sample was taken from the outlet of slurry preheater located in the upflow of liquefaction reactors, and was tested. Tanito Harum coal was used for liquefaction. Preheater was operated under the condition of pressure of 170 kg/cm{sup 2}, gas flow rate of 64 Nm{sup 3}/hr, and at temperature up to 410{degree}C at the outlet, in response to the standard test condition. The slurry sample was discharged into a high temperature separator with temperature of 250{degree}C. Liquefaction was not proceeded at the outlet of preheater. Solid residue yielded around 80%, and liquid yielded around 15%. Gases, CO and CO2, and water yielded also small amount around 3%. The solid sample contained much IOM fraction (tetrahydrofuran-insoluble and ash), and the liquid contained much heavy oil fraction. Hydrogenation was not proceeded, and the hydrogen consumption was very low showing below one-tenth of that at the usual operation. Hydrogen sulfide gas was formed at early stage, which suggested that the change of iron sulfide catalyst occur at early stage of liquefaction. 1 ref., 5 figs., 2 tabs.

  6. Investigation of the deposit formation in pipelines connecting liquefaction reactors; 1t/d PSU ni okeru ekika hanno tokan fuchakubutsu no seisei yoin ni kansuru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Okada, Y.; Nogami, Y.; Inokuchi, K. [Mitsui SRC Development Co. Ltd., Tokyo (Japan); Mochizuki, M.; Imada, K. [Nippon Steel Corp., Tokyo (Japan)

    1996-10-28

    The liquefaction reaction system of an NEDOL process coal liquefaction 1t/d PSU was opened and checked to investigate the cause of the rise of differential pressure between liquefaction reactors of the PSU. The liquefaction test at a coal concentration of 50 wt% using Tanito Harum coal was conducted, and it was found that the differential pressure between reactors was on the increase. By the two-phase flow pressure loss method, deposition thickness of deposit in pipelines was estimated at 4.4mm at the time of end operation, which agreed with a measuring value obtained from a {gamma} ray. The rise of differential pressure was caused by deposit formation in pipelines connecting reactors. The main component of the deposit is calcite (CaCO3 60-70%) and is the same as the usual one. It is also the same type as the deposit on the reactor wall. Ca in coal ash is concerned with this. To withdraw solid matters deposited in the reactor, there are installed pipelines for the withdrawal at the reactor bottom. The solid matters are regularly purged by reverse gas for prevention of clogging. As the frequency of purge increases, the deposit at the reactor bottom decreases, but the deposit attaches strongly to pipelines connecting reactors. It is presumed that this deposit is what Ca to be discharged out of the system as a form of deposition solid matter naturally in the Ca balance precipitated as calcite in the pipeline connecting the reactor. 3 refs., 5 figs., 4 tabs.

  7. Ni hombres ni mujeres providenciales

    OpenAIRE

    Montaño Virreira, Sonia

    2000-01-01

    Debo advertir a la y el lector de este texto que lo que a continuación se presenta no es, ni de lejos, una propuesta realista, si por ella entendemos la traducción, enclave mujer, de las actuales tendencias de liderazgo político vigentes en la región. Por el contrario, intento argumentaren favor de un liderazgo que supere el caudillismo como estilo y se aproxime al máximo hacia el respeto de las formas, entendiendo que sin ellas no es posible construir la democracia. Para hacerlo reviso rápid...

  8. Feature of drillship operation in Cambodia by CAMPEX and in Vietnam by MJC Petroleum Co. Ltd.; Kanbojia (CAMPEX) to Betonamu (MJC) ni okeru doriru shippu ni yoru sogyo no tokucho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, H. [Japan Petroleum Exploration Co. Ltd., Tokyo (Japan)

    1995-09-01

    The drilling of an experimental petroleum well was done in Cambodia in 1994 for the first time in 20 years. In the same year, the economic sanction by the USA against Vietnam was discontinued, and US oil companies, such as the Mobile Oil Corp. and the Occidental Petroleum Corp. have participated in the trial drilling operation for the first time in 19 years. All of these companies adopted drillship type rigs. The Japan Petroleum Exploration Co., Ltd. was engaged in the trial drilling operations of the Cambodian Petroleum Exploration Corp. (CAMPEX) in Cambodia and the MJC Petroleum Corp. in Vietnam, and experienced the drilling operation using drillships with these companies. This paper concretely shows differences between a drillship and a semisubmersible drilling rig, taking the cases of the drilling operations of CAMPEX in Cambodia and MJC in Vietnam. The paper describes the large load capacity and excellent mobility of the drillship as the advantages, and the large vessel motion and low stability with respect to a shallow gas in a low water depth area as the disadvantages. 3 refs., 13 figs., 2 tabs.

  9. Relationship between the electric resistivity and the rain fall in discontinuity zone of rock slope by the continuous measurement; Renzoku tokei ni yoru ganban shamen no furenzokutaibu ni okeru mikake hiteiko henka to kou tono kankei ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Kusumi, H.; Nishida, K. [Kansai University, Osaka (Japan). Faculty of Engineering; Nakamura, M. [Newjec Inc., Osaka (Japan)

    1996-10-01

    The relationship between change in resistivity and rainfall was studied by continuously measuring resistivities of fracture zone and stratum boundary along the measuring line of 95m long from the top to bottom of rock slope. The measurement field was located on a hill of 150-200m high at the northern part of Arima-Takatsuki tectonic line. Electrodes of 30m in maximum measuring depth were arranged at 289 points by dipole-dipole method. Resistivity was continuously measured at time intervals of 6 hours. Apparent resistivity was hardly affected by rainfall at points with less infiltration of stormwater from the ground surface, while it decreased by rainfall at points on fracture zone, stratum boundary or bleeding channel. The change rate of apparent resistivity could be approximated with the exponential function of rainfall. In such case, the apparent resistivity under most dried condition at the concerned point should be used as reference maximum apparent resistivity. The change rate of apparent resistivity due to rainfall in fracture zone reflects infiltration of stormwater, suggesting to be useful for disaster prevention of slopes. 5 refs., 6 figs.

  10. Improvement of stable technique and welding efficiency of digital controlled pulse MAG welder; Digital seigyo pulse MAG yosetsuki ni okeru anteika gijutsu to yosetsu seino no kojo

    Energy Technology Data Exchange (ETDEWEB)

    Nakamata, T.; Uezono, T. [Daihen Corporation, Osaka (Japan)

    1996-10-01

    This paper describes the digital control technology of pulse MAG welders for stable operation and performance improvement. Pulse welding forms a droplet at a wire tip during pulse period, and separates the droplet by pinching it by pulse electromagnetic pinch force. This technology automatically optimizes and stabilizes welding current waveform by digital control to obtain such smooth one pulse- one droplet transfer under various welding conditions, and also controls external characteristics of welding power sources to obtain a constant arc length regardless of the distance between the tip and matrix. The technology offers superior welding stability in a small current range below 100A, and superior high-speed weldability, arc startability and transient responsibility. The newly developed pulse MAG welder mounts the control function of penetration for the first time as pulse welder, and allows stable penetration regardless of torch height. In addition, the welder allows reduction of noise level, superior weldability of galvanized steel sheets, superior basic welding performance, and automatic setting of welding conditions. 2 refs., 19 figs.

  11. R and D contract management systems in the USA (Attachment); Beikoku ni okeru R and D contract kanri system (tenpu shiryohen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    Presented herein is the attachment for 'R and D contract management systems in the USA'. The major contents include regulations governing the R and D contracts, procedures for the R and D contracts, financial procedures for the R and D contracts, procedures for the alternative R and D contracts, financial management of the R and D contracts, and activities for the management of the contract processes by electronic systems. (NEDO)

  12. Hybrid structure in civil engineering construction. Composite types of steel and concrete; Doboku bun`ya ni okeru fukugo kozo. Kozai to concrete no ittai keishiki

    Energy Technology Data Exchange (ETDEWEB)

    Sato, T. [JR Railway Technical Research Inst. Tokyo (Japan)

    1995-03-30

    In connection with hybrid structures in civil engineering construction, classification and application of composite types of steel and concrete are discussed. H steel embedded beam is a composite beam in which the H shape steel of the main beam is connected to rolled or welded H shape steel using cross beams. Composite structure columns are grouped into the composite column and the steel pipe concrete column. SRC piers are often adopted from the viewpoints of constraints for execution of works and vibration proof. Steel and concrete hybrid structure is a kind of structural system in which various kinds of materials such as steel, RC, or PC members are connected. The cable stayed bridge utilizes characteristics of steel and concrete effectively. For the piers of municipal expressway viaducts, there are executed cases of mixed structures which have RC, SRC columns for T shape piers and S structure for the bridges. SRC structure and composite columns are adopted often for structures of subway stations. 7 refs., 7 figs.

  13. Efficient calculation of potential distribution in two-layer earth; Niso kozo daichikei ni okeru denki tansa no tame no koritsuteki den`i keisan shuho

    Energy Technology Data Exchange (ETDEWEB)

    Kataoka, M.; Okamoto, Y. [Chiba Institute of Technology, Chiba (Japan); Endo, M.; Noguchi, K. [Waseda University, Tokyo (Japan); Teramachi, Y.; Akabane, H. [University of Industrial Technology, Kanagawa (Japan); Agu, M. [Ibaraki University, Ibaraki (Japan)

    1997-05-27

    An efficient calculation method of potential distribution in the presence of an embedded body in multi-layer earth has been proposed by expanding the method of image with a consideration of multiple reflection between the ground surface and each underground boundary. For this method, when solving boundary integral equation with the potential of embedded body surface as only one unknown, i.e., when obtaining discretization equation, ordinary boundary element program developed for analyzing the finite closed region can be used. As an example, numerical calculation was conducted for the two-layer earth. The analysis expression of potential distribution in the case of the certain embedded body in two-layer earth has never published. Accordingly, the calculated results were compared with those by the integral equation method. As a result, it was concluded that the primary potential obtained from the present method agreed well with that obtained from the integral equation method. However, there was a disregarded difference in the secondary potential. For confirming the effectiveness, it was necessary to compare with another numerical calculation method, such as finite element method. 5 refs., 5 figs.

  14. Airborne gamma-ray survey around the Negoro fault. 1; Negoro danso shuhen chiiki ni okeru kuchu {gamma} sen tansa. 1

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, E.; Kasuya, Y.; Hasegawa, H. [Aero Asahi Corp., Tokyo (Japan); Tsukuda, E. [Geological Survey of Japan, Tsukuba (Japan)

    1997-05-27

    An airborne gamma-ray survey was carried out to investigate the active fault system in the central structure line in the peripheral area of the city of Wakayama. At the same time, with an objective to enhance applicability of the airborne gamma-ray survey to active fault investigation, fundamental data were acquired and discussed. The measurement data were processed according to the standard method specified by IAEA. An ID-FFT filter and a nonlinear filter were employed to extract anomalous gamma-ray intensity values. The gamma-ray intensity distribution chart shows a noticeable positive anomalous area extending from the central part of the western edge to the north-east direction. This area agrees nearly well with the Negoro fault, but its peak portion is positioned slightly more to south than the position of the Negoro fault shown in existing data. The Sakuraike fault and the vicinity of the central structure line also show positive anomaly as a whole, particularly remarkably in the vicinity of their converging portion. However, differing from the vicinity of the Negoro fault, the areas are not extracted as an anomalous area which has directionality and extends in a line form. One of the factors for this would be that it is a fault in unsolidified deposits with low opening trend, differing from the one in solidified rocks. 1 fig., 3 tabs.

  15. Array measurements of long-period microtremors in southwestern Kanto plain, Japan; Kanto heiya nanseibu ni okeru yaya choshuki bido no array kansoku

    Energy Technology Data Exchange (ETDEWEB)

    Yamanaka, H.; Sato, H.; Kurita, K.; Seo, K. [Tokyo Institute of Technology, Tokyo (Japan)

    1997-05-27

    Array measurements of long-period microtremors were carried out in the southwestern part of Kanto Plain, Japan, to obtain S-wave velocity structures in sedimentary beds as fundamental data for estimating long-term strong ground motion in Kanto Plain. The major component in a long-term seismic motion observed in Kanto Plain is the surface wave. According to the result of observations on Love wave by Kinoshita et al, the wavelengths of the surface waves of a long-term cycle are 10 to 20 km. Therefore, if an array observation is to be performed at intervals of about two wavelengths, about 40 points will be required to cover the entire Kanto plain. The final phase velocity is decided by averaging phase velocities of each cycle obtained for each data set. The acquired phase velocities are analyzed inversely by using a genetic algorithm to derive the S-wave velocities at each observation point. The present microtremor array observation has used 13 points in the southwestern part of Kanto Plain to acquire S-wave velocity (Vs) distribution in sedimentary beds. It was made clear that beds with Vs of 1.0 km/s and Vs of 1.5 km/s exist in this area between the surface bed and the seismic foundation with Vs of about 3 km/s. 10 refs., 10 figs., 1 tab.

  16. Discussion on sensor location in circular array for spatial autocorrelation method; Kukan jiko sokanho no enkei array ni okeru jishinkei haichi no kento

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, H.; Iwamoto, K.; Saito, T.; Yoshida, A. [Iwate University, Iwate (Japan). Faculty of Engineering

    1997-05-27

    Methods to derive underground structures by utilizing the dispersion phenomenon of surface waves contained in microtremors include the frequency-wave number analysis method (the F-K method) and the spatial autocorrelation method (SAC method). The SAC method is said capable of estimating the structures to deeper depths than with the F-K method if the same seismometer is used. However, the F-K method is used more frequently. This is because the SAC method imposes a strict restriction that seismometers must be arranged evenly on the same circumference, while the F-K method allows seismometers to be arranged arbitrarily during an observation. Therefore, the present study has discussed whether the SAC method can be applied to observations with the seismometers arranged in the same way as in the F-K method, by using microtremor data acquired from actual observations. It was made clear that a seismometer arrangement for the SAC method may be sufficed with at least three meters arranged on the same circumference. These meters may not have to be arranged evenly, but because the acquired phase velocities may vary according to wave arriving directions and seismometer arrangement, it is desirable to perform observations with seismometers arranged as evenly as possible. 13 figs.

  17. Non destructive measuring methods of secondary metabolite levels in hairy root cultures; Mojokon baiyo ni okeru nijitaisha sanbutsu no hihakai sokuteiho

    Energy Technology Data Exchange (ETDEWEB)

    Berzin, I. [Ben8Gurion University of the Negev, Beer-Sheva, (Israel)Department of Chemical Engineering; Mills, D.; Merchuk, J.C.

    1999-05-05

    Traditional analytical methods of determining secondary metabolite levels (e. g., chromatography, spectrophotometry) are based on extraction of the tested tissue and involve its destruction. As a result, it is very difficult to determine such levels in a small localized area. Moreover, because measurements performed in the course of culture necessarily refer to different samples of tissue, levels recorded could reflect variability in the hairy roots themselves, rather than variation as a function of time or morphological location. In this communication we report on a method developed to measure local and overall secondary metabolite levels in a non destructive manner using image analysis and apply it to determine metabolite concentrations in hairy root cultures of Beta unlgaris. To develop the method, after scanning a root under sterile conditions and replacing it in the growth vessel, we converted the image data from red-green blue to the hue-saturation-intensity coordinate system. Hue and saturation values served respectively for thresholding and determination of pigment level. Root diameter, simulated by thickness of root extract films, was found to be proportional to saturation values, and thus is taken into account when pigment concentration is determined. The data obtained by image analysis were used to determine local and overall accumulation of betacyanins and betaxanthin pigments over time and results were then validated by spectrophotometric analysis. It was concluded that the proposed non destructive method enables accurate determination of changes in local secondary metabolite level at any point in the root, as well as monitoring of changes in overall levels in the entire root system throughout the growth period. (author)

  18. Calculation of wave resistance by using Kochin function in the Rankine source method; Rankinsosuho ni okeru kochin kansu wo mochiita zoha teiko keisan

    Energy Technology Data Exchange (ETDEWEB)

    Yasukawa, H. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan)

    1997-10-01

    In order to avoid negative wave resistance (which is physically incomprehensible) generated in calculating wave resistance by using the Rankine source method, a proposal was made on a wave resistance calculation method using the Kochin function which describes behavior of speed potential in regions far apart from a hull. The Baba`s condition was used as a free surface condition for the speed potential which expresses wave motions around a hull. This has allowed a new Kochin function which uses as unknown the speed potential on the hull surface and the free surface near the hull to be defined and combined with the Rankine source method. A comparison was made between the calculated values for wave resistance, hull subsidence and trim change of an ore transporting vessel (SR107 type of ship) in a fully loaded condition and the result of water tank tests. The wave resistance values derived from pressure integration have all become negative when the Froude number is from 0.1 to 0.2, while no negative resistance has appeared in the calculations by using the Kochin function, but the result has agreed with that of the water tank tests. Accuracy of the calculations at low speeds was improved. The trim change in the calculations was slightly smaller than that in the water tank tests. The subsidence showed a good agreement. 7 refs., 1 fig.

  19. Characteristic analysis of turbulent heat diffusion in a multi-compartment structure; Takukakuka kukan kozo ni okeru ranryunetsu kakusan gensho no kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Hu, C.; Fukuchi, N. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-10-01

    An analysis was made on turbulent heat diffusion in a multi-compartment structure necessary for designing calorific power and environment for functional systems used in marine vessels and off-shore structures. In a multi-compartment structure, the diffusion phenomenon is complex because of movement of air flow in turbulence and buoyancy resulted from non-isothermal condition. The phenomenon is largely affected by space shapes and walls, and the conditions in heat diffusion field is governed also by shapes of opening connecting the compartments. An analysis was made by using the SIMPLE method on turbulent heat diffusion in a multi-compartment space with high Raleigh number in which natural convection is dominant. If the opening is small, the Coanda effect appears, in which air flow passing through the opening rises along the wall, wherein a high-temperature layer is formed near the ceiling, making the heat diffusion inactive. If the opening is large, a jetting flow from the opening and a large circulating flow are created, which cause active advection mixture, making temperature gradient smaller in the upper layer. Heat transfer intensity in an opening on a partition wall decays in proportion with 1/4th power of the opening ratio. 7 refs., 11 figs.

  20. Report on the field test project for wind power development at Matsushima (wind characteristics investigation); Matsushima ni okeru furyoku kaihatsu field test jigyo (fukyo seisa) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The test was conducted at Matsushima, Oseto Town, Nishisonogi-gun, Nagasaki Prefecture, for a year. The annual average wind speed is 4.3m/s at 20m above ground, lower than the reference value (5.8m/s). Wind speed variation is great in the cold season and small in the warm season, which is typical of Japan's climate. A maximum instantaneous wind speed to exceed wind turbine system wind-resisting capacity is not likely to occur. At the site selected for investigation, there is no manifestly prevailing wind direction, and caution needs to be exercised relative to mutual interference in case plural wind turbine systems are built. The exponential value in the wind speed vertical distribution is 7.1. The turbulence intensity index is 0.14 (for 4.0m/s or higher), which indicates a relatively small scale. As for wind energy density, it is short of the level indicated by U.S. Department of Energy. Wind turbines of 150 kW, 300 kW, and 750 kW are assumed, and they all work beyond NEDO (New Energy and Industrial Technology Development Organization) indicated operating rates, and will also satisfy NEDO indicated capacity ratios when their wattage is higher than 300 kW. Although Matsushima is not necessarily an excellent place for wind power development in view of the annual average wind speed, it is concluded that possibilities are that Matsushima will satisfy the requisites for a wind power development site if large wind turbine systems with the hub positioned high are introduced. (NEDO)

  1. Change in surface characteristics of coal in upgrading of low-rank coals; Teihin`itan kaishitsu process ni okeru sekitan hyomen seijo no henka

    Energy Technology Data Exchange (ETDEWEB)

    Oki, A.; Xie, X.; Nakajima, T.; Maeda, S. [Kagoshima University, Kagoshima (Japan). Faculty of Engineering

    1996-10-28

    With an objective to learn mechanisms in low-rank coal reformation processes, change of properties on coal surface was discussed. Difficulty in handling low-rank coal is attributed to large intrinsic water content. Since it contains highly volatile components, it has a danger of spontaneous ignition. The hot water drying (HWD) method was used for reformation. Coal which has been dry-pulverized to a grain size of 1 mm or smaller was mixed with water to make slurry, heated in an autoclave, cooled, filtered, and dried in vacuum. The HWD applied to Loy Yang and Yallourn coals resulted in rapid rise in pressure starting from about 250{degree}C. Water content (ANA value) absorbed into the coal has decreased largely, with the surface made hydrophobic effectively due to high temperature and pressure. Hydroxyl group and carbonyl group contents in the coal have decreased largely with rising reformation treatment temperature (according to FT-IR measurement). Specific surface area of the original coal of the Loy Yang coal was 138 m{sup 2}/g, while it has decreased largely to 73 m{sup 2}/g when the reformation temperature was raised to 350{degree}C. This is because of volatile components dissolving from the coal as tar and blocking the surface pores. 2 refs., 4 figs.

  2. FR noise associated with time varying arc current across brush and commutator in universal motors; Universal motor ni okeru seiryu arc to denji zatsuon

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, S.; Kurihara, K.; Mase, H. [Ibaraki University, Ibaraki (Japan); Takahashi, K. [Hitachi Koki Co. Ltd., Tokyo (Japan)

    1998-06-01

    EMI in the universal motors remains as a very important problem to be solved and is conventionally evaluated by the remote measurement of noise figure at the distant point from the noise source. In order to clear the mechanism of noise generation in the universal motors, we try to measure the noise pattern near the noise source by using two coils which are installed for direct detection of the time varying arc current and the noise levels in the range of 0.15 - 5 MHz. The experimental results show that the noise levels depend on the time derivatives (di/dt) of the arc current and the wide spread of noise levels are caused by randomness of arc quenching. We also discuss the propagation of noise and the comparison with the conventional evaluation of EMI, using an appropriate procedure of the obtained experimental data. 9 refs., 18 figs.

  3. Detection of arcing ground fault location on a distribution network connected PV system; Hikarihatsuden renkei haidensen ni okeru koko chiryaku kukan no kenshutsuho

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M.; Iwaya, K.; Morooka, Y. [Hachinohe Institute of Technology, Aomori (Japan)

    1996-10-27

    In the near future, it is supposed that a great number of small-scale distributed power sources, such as photovoltaic power generation for general houses, will be interconnected with the ungrounded neutral distribution system in Japan. When ground fault of commercial frequency once occurs, great damage is easily guessed. This paper discusses the effect of the ground fault on the ground phase current using a 6.6 kV high-voltage model system by considering the non-linear self-inductance in the line, and by considering the non-linear relation of arcing ground fault current frequency. In the present method, the remarkable difference of series resonance frequency determined by the inductance and earth capacity between the source side and load side is utilized for the detection of high-voltage arcing ground fault location. In this method, there are some cases in which the non-linear effect obtained by measuring the inductance of sound phase including the secondary winding of transformer can not be neglected. Especially, for the actual high-voltage system, it was shown that the frequency characteristics of transformer inductance for distribution should be theoretically derived in the frequency range between 2 kHz and 6 kHz. 2 refs., 5 figs., 1 tab.

  4. Experimental results of acetone hydrogenation on a heat exchanger type reactor for solar chemical heat pump; Solar chemical heat pump ni okeru acetone suisoka hanno netsu kaishu jikken

    Energy Technology Data Exchange (ETDEWEB)

    Takashima, T.; Doi, T.; Tanaka, T.; Ando, Y. [Electrotechnical Laboratory, Tsukuba (Japan); Miyahara, R.; Kamoshida, J. [Shibaura Institute of Technology, Tokyo (Japan)

    1996-10-27

    With the purpose of converting solar heat energy to industrial heat energy, an experiment of acetone hydrogenation was carried out using a heat exchanger type reactor that recovers heat generated by acetone hydrogenation, an exothermic reaction, and supplies it to an outside load. In the experiment, a pellet-like activated carbon-supported ruthenium catalyst was used for the acetone hydrogenation with hydrogen and acetone supplied to the catalyst layer at a space velocity of 400-1,200 or so. In the external pipe of the double-pipe type reactor, a heating medium oil was circulated in parallel with the flow of the reactant, with the heat of reaction recovered that was generated from the acetone hydrogenation. In this experiment, an 1wt%Ru/C catalyst and a 5wt%Ru/C catalyst were used so as to examine the effects of variation in the space velocity. As a result, from the viewpoint of recovering the heat of reaction, it was found desirable to increase the reaction speed by raising catalytic density and also to supply the reactant downstream inside the reaction pipe by increasing the space velocity. 1 ref., 6 figs., 1 tab.

  5. Composition dependence of the rate of bainitic transformation in Cu-Zn-Al alloys; Cu-Zn-Al gokin ni okeru bainite hentai sokudo no gokin sosei izonsei

    Energy Technology Data Exchange (ETDEWEB)

    Tabuchi, M.; Marukawa, K. [Hokkaido University, Sapporo (Japan). Faculty of Engineering

    1998-04-20

    The bainitic transformation is known to have an intermediate nature between the martensitic transformation and the diffusional transformation, while its transformation mechanism has not yet been clarified precisely. If this transformation involves lattice shearing like the martensitic transformation, it should take place more easily in those alloys which have a higher tendency to transform martensitically. On this expectation, the composition dependence of bainitic transformation kinetics has been studied in Cu-Zn-Al alloys. Especially, the relation between the martensitic transformation temperature (Ms) and the bainitic transformation rate was examined. The transformation process was traced by measuring the electrical resistivity of specimens during aging. It was found that the transformation rate is higher in those alloys having a higher Ms temperature. The activation energy for the process, obtained from its temperature dependence, is independent of the alloy composition and roughly equal to that for solute diffusion in the parent alloy. This indicates that the transformation is controlled by diffusion of solute atoms. The composition dependence of the bainitic transformation rate is discussed in terms of a diffusion controlled growth theory. 15 refs., 7 figs., 3 tabs.

  6. Isothermal transformation behavior in 12%Cr-0.3%C steel; 12%Cr-0.3%C ko ni okeru koon hentai kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Mikami, M. [Japan Casting and Forging Corp., Kitakyushu (Japan); Tsuchiyama, T.; Takaki, S. [Kyushu Univearsity, Fukuoka (Japan)

    2001-01-01

    In order to get fine grain of large martensitic stainless steels products, it is available to use the isothermal transformation before the austenitizing. When 12%Cr-0.3%C steel is subjected to the full solution treatment and following isothermal transformation at 900-1,020K, it is observed that the microstructures are affected by the isothermal ageing temperature. The microstructure transformed isothermally at 1,020K is the full eutectoid structure where carbides precipitate homogeneously. On the other hand, the microstructure transformed at 900K is the mixed heterogeneous structure: the eutectoid structure where carbides precipitate densely around the edge of prior austenite grains and the ferrite structure where carbides hardly precipitate in the center of prior austenite grains. These phenomena are concerned with the decreasing in carbon content in the untransformed austenite as the eutectoid transformation progresses. The amount of decreasing in carbon at 900K is larger than at 1,020K, which causes the shortage of carbon in austenite in the last period of isothermal transformation. In the case of the isothermal transformation at 900K, the reason of why there are the ferrite structures with no carbide in the center of prior austenite grains is that the massive transformation is induced by the shortage of carbon in untransformed austenite. (author)

  7. Continuous cooling transformation behavior for heat treatment of spheroidal graphite cast iron. Kyujo kokuen chutetsu no netsushoriji ni okeru renzoku reikyaku hentai kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Nakata, T.; Matsumoto, H. (Shibaura Institute of Technology, Tokyo (Japan)); Kasugai, T. (National Research Institute for Metals, Tsukuba (Japan)); Koyama, M. (Automobile Foundry Co. Ltd., Yokohama (Japan))

    1992-08-25

    In order to study basic heat treatment properties of spheroidal graphite cast iron, the continuous cooling transformation(CCT) diagrams for the material equivallent to FCD700 under various austenitized conditions were obtained. There were 4 kinds of austenitized conditions varying from 1123K and 420s to 1323K and 1,800s. Eight kinds of cooling time from the austenitized temperature to 773K ranged from 6s to 4,000s. The transformation temperature was measured by a thermal expansion method. When the austenitized temperature was increased from 1123K to 1323K, ferrite and pearlite transformation regions moved a little in the CCT diagrams and the martensite transformation temperature decreased from 493K to 458K. The bainite region in the CCT diagrams disappeared at the austenite temperatures above 1223K. The nucleation sites of ferrite and pearlite in the spheroidal graphite cast iron were generated at grain boundary between austenite and graphite but not at grain boundary between austenites. The reason of such phenomena was also studied. 10 refs., 8 figs., 2 tabs.

  8. Flow visualization in the high shear flow on cavitation erosion around a butterfly valve. Butterfly ben karyu no ko sendanryoiki ni okeru cavitation shogekiatsu bunpu

    Energy Technology Data Exchange (ETDEWEB)

    Tani, K. (Tohoku University, Sendai (Japan)); Ito, Y.; Oba, R. (Tohoku University, Sendai (Japan). Inst. of Fluid Science)

    1991-05-25

    In order to suppress the cavitation erosion occurring at a butterfly valve, the spatial distribution of cavitation induced pressure pulses and the aspect of extremely erosive vortex cavitation in the erosive region recognized in a practical valve were clarified, using pressure sensitive films and an instant stereophotography for the representative valve opening and cavitation factor. The highly erosive cavitation taking place at the orifice side downstream of the butterfly valve is an extremely erosive cavitation, and the occurred region is limited to the highly shear layers forming the violent disturbance of the orifice jet. It was found that the erosion could greatly be alleviated by eliminating this highly shear layers being the basis of the extremely erosive vortex cavitation. It was also found that the risk of erosion was very low for the nozzle side by the measurement of cavitation impact pressure ranging all periphery of the pipe wall around the valve body. 10 refs., 5 figs.

  9. Studies on substitutional protein sources for fish meal in the diet of Japanese flounder; Hirame shiryo ni okeru miriyo shigen no riyo

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, K.; Furuta, T.; Sakaguchi, I. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-08-01

    Effectiveness of livestock industry wastes and vegetable protein added to fish meal in fish farming is tested by feeding the Japanese flounder. In the experiment, a part or the whole of the fish meal protein is replaced by the meat meal (MM), meat and bone meal (MBM), corngluten meal (CGM), or dried silkworm pupa meal (SPM), and fries of the Japanese flounder are fed on the new diets for eight weeks. On a diet containing 60% or less of MM, no change is detected in the fish in terms of increase in weight, protein efficiency ratio, and blood components, indicating that 60% at the highest of fish meal may be replaced by MM. In the case of MBM, it can occupy approximately 20%. As for CGM, the proper substitution rate is approximately 40%. Essential amino acids that the new diets may lack are added for an approximately 10% improvement on the result. The SPM substitution works up to 40%, when, however, the blood components are degraded. The proper substitution rate is therefore placed at approximately 20%. 38 refs., 2 figs., 17 tabs.

  10. Technical development of cost-efficient installation of power distribution cables under pavements. Haiden chichuka ni okeru doboku kensetsu gorika gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kokusho, Koji; Kataoka, Tetsuyuki; Tanaka, Yasuyuki; Yoshida, Yasuo; Ikemi, Motoyoshi; Suzuki, Koichi; Kitano, Koichi; Kobayashi, Seiichi; Kanazu, Tsutomu; Komada, Hiroya.

    1987-12-01

    Various latest technical developments were surveyed for the cost-effective installation of power distribution cables under pavements, and their applicabilities were demonstrated with the evaluation of their cost-reduction effects. Cables in conventional vinyl protection tubes could be buried only 30cm under pavements, and in such case, the cost was reduced to 51% of those of conventional methods. As the results of soil tests, excavated soil over 80% was reusable through coarse screening. Underground radar technique to explore buried pipes from the surface was detectable several pipes buried 1.5-2.0m underground, although some problems in precision were found. The improvement of reinforced concrete man-hole structures to minimize the volume of excavated soil indicated the cost reduction of nearly 20%. The application of these techniques to the installation of cables was expected to ultimately halve the total civil engineering cost. 21 refs., 130 figs., 46 tabs.

  11. Cooperative measurements of microtremors in the north-eastern region of Nishinomiya city, Hyogo Pref.; Nishinomiyashi hokutobu ni okeru joji bido no godo kansoku

    Energy Technology Data Exchange (ETDEWEB)

    Maiguma, T.; Matsuzawa, H. [Saitama University, Saitama (Japan). Faculty of Engineering; Sawada, Y.; Tazawa, Y. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-05-01

    For the purpose of generally grasping space distribution of ground vibration characteristics, cooperative measurements were conducted in a wide area, mainly in the area stricken by the M7 earthquake. Forty-five organs such as governmental institutes, universities, and private company institutes participated in the measurements which were conducted at 1967 measuring points. The area which the author is in charge is an area from the north of Nishinomiya City to the south of Takarazuka City. The area is relatively far from the hypocenter area, but the magnitude is 7 there and damage was concentrated. The measurements were made by each independent team from August 29 to September 1, 1995. As a result of spectral measurements of NS, EW and UD components, conspicuous peaks were seen in an extent of 1.5 sec. cycle in almost all measuring points and components. Further, in spectra of horizontal motion components of A measuring point group, conspicuous peaks were seen in an extent of 0.15-0.5 sec. cycle, and in those in B and C measuring point groups, in an extent of 0.35-0.5 sec. cycle. In upper/lower motion components, conspicuous peaks were seen in an extent of 0.3 sec. cycle in A measuring point group. 4 figs.

  12. Analysis of the membrane fouling on cross-flow ultrafiltration and microfiltration of soy sauce lees; Shoyuhiireden no kurosuforo roka ni okeru fauringu no kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Furukakwa, T. [Kikkoman Corporation, Chiba (Japan); Kobayashi, H.; Kokubo, K.; Watanabe, A. [Niigata University, Niigata (Japan). Graduate School of Science and Technology

    2000-05-10

    Although since the 1980's Japanese soy sauce manufactures have developed cross-flow membrane filtration systems to recover soy sauce from its lees, the mechanisms by which the membrane fouls during filtration have not been theoretically discussed. Calculated flux declines using a theoretical equation developed for cross-flow cake filtration were compared against experimental results involving the filtration of soy sauce lees using polysulfone ultrafiltration and micro filtration membranes. Membrane fouling due to the deposition and intrusion of soy sauce lees was evaluated from the hydraulic resistances of the membrane and the cake layer. Calculated flux declines with time agree with the experimental results. Specific resistance of the cake layer which is an adjustable parameter of the equation, decreases with increasing cross-flow velocity. Hydraulic resistance exhibited by the membranes is independent of feed flow velocity. However, the resistance of the cake layers decreases with increasing cross-flow velocity. This corresponds to the steady-state flux increase. In conclusion, the main cause of fouling in the filtration of soy sauce lees is cake layer formation. By using the cake filtration model for cross-flow, the flux decline with time during the filtration is capable of being predicted. (author)

  13. Correlation between the structural relaxation and the functionality of optically functional glasses; Kokinosei glass ni okeru kozo kanwa to kinosei no sokan

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, T. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1994-12-15

    A discussion was given to elucidate the correlation between the crystallization of infrared ray permeating glass and the infrared ray permeability. The elucidation used infrared ray permeation spectrum, infrared ray absorption spectrum, and the Mosbauer effect. Reduction in permeability due to heat treatment of aluminate glass was discussed from the crystallization mechanism. Ultrafine crystals of mayenite phase having a composition ratio of CaO/Al2O3 = 1.7 diffuse and grow from the glass surface into interior as a result of heat treatment. The crystal growth is triggered by severance of Al-O tetrahedron. Gallate glass has CaGa2O4 and small amount of CaFe2O4 phase deposited when it is heat-treated in the vicinity of Tg. Although the infrared ray permeability decreases in association with the crystallization, the decrease is limited to crystallization on the glass surface, hence the permeability will not fall to zero. Laser irradiation on the gallate glass causes crystallization, resulting in reduced infrared ray permeability. Semi-stable Ca3Ga4O7 phase remains, however, because the heat energy amount is not large. Tellurite glass has {alpha}-TeO2 and a small amount of telluric acid iron deposit when heat-treated. 29 refs., 10 figs.

  14. Survey result of airborne electromagnetic survey in the Hachimantai Sumikawa landslide area; Hachimantai Sumikawa jisuberi ni okeru kuchu denjiho chosa kekka

    Energy Technology Data Exchange (ETDEWEB)

    Konishi, N.; Nakamura, N.; Miyamoto, T. [Nippon Engineering Consultant Co. Ltd., Tokyo (Japan)

    1997-10-22

    For the study of a landslide that occurred at Hachimantai Sumikawa, Akita Prefecture, an airborne electromagnetic survey is conducted for the examination of the relationship between the spot of landslide and solfataric clay (bluish gray clay). The location is a cap block type structure with a Neogene green tuff overlain by accumulated lava flow, where hot water is very active. The system used in this study is capable of measurement across a very wide frequency range, and measurements are made simultaneously at five frequencies of 220Hz, 1100Hz, 5500Hz, 27,500Hz, and 137,500Hz, these frequencies meaning depth levels 5m-70m explored. It is found that the spot of landslide matches a region where resistivity is so low as to be not higher than 10ohm/m. It is also found, in the resistivity cross section analysis for the middle part of the spot of landslide, that the mass of soil that moved on the upper part of the spot is relatively high in resistivity while the part below the slide surface is low in resistivity. There is agreement between the results reported above and the results of on-site investigations. 4 refs., 6 figs.

  15. Application of geophysical methods to investigation of old castle, especially of the moat; Joshi no chosa ni okeru butsuri tansa no tekiyo (horiato no tansa)

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, A.; Karube, F.; Kobayashi, M.; Toge, M. [OYO Corp., Tokyo (Japan)

    1996-05-01

    An explanation is made about the application of geophysical methods to the investigation of the ruins of old castles especially of their moats. Techniques currently in use for exploration of the ruins of castles are mainly underground radar exploration and electric exploration. The underground radar method sends electromagnetic waves through the ground and receives the reflection for a high-precision exploration of the layers shallow in the ground. Therefore, this method is suitable for probing the ruins of castles relatively shallow in the flat land, hills, and mountains. The electric method (resistivity image method) do the probing by use of the two-electrode arrangement, performs inverse analysis on the basis of the obtained data for the determination of the underground resistivity distribution, and displays the distribution in an image easy to read. This method, when there is a great separation between the two electrodes, explores relatively deep into the ground. Thanks to this feature, this method is effective in probing relatively wide and deep ruins of moats, that is, the ruins of moats of castles built in later years, especially of those then filled with water. 2 refs., 5 figs.

  16. Travel time and ray path computation in 2D-heterogeneous structures; Fukinshitsu kozo ni okeru jishinha soji oyobi hasen no atarashii keisan hoho

    Energy Technology Data Exchange (ETDEWEB)

    Fujie, G.; Kasahara, J.; Sato, T.; Mochizuki, K. [The University of Tokyo, Tokyo (Japan). Earthquake Research Institute

    1996-05-01

    Methods were studied for determining the initial travel time and ray paths with stability when an non-linear travel time inversion is performed in an inhomogeneous structure. The travel time calculation was based on Faria and Stoffa`s method. First, the 2-dimension space was sectioned by grids, and `slowness` was assigned to all the lattice points. Starting from the vibration source, travel time at each lattice point is sequentially calculated. This method calculates travel time for any structure without breakup. In this study, an algorithm more sophisticated than the method of Faria, et al., was developed, and the improvement of travel time calculation accuracy led to the accurate determination of the direction of incidence into the lattice points during the initial motion. The calculation of ray paths was effected by tracing back from the receiving points the incidence into the lattice points or by following back the ray paths to the vibration source. This method performs stable calculation for a heavily inhomogeneous structure and, with the algorithm being simple, do the parallel programming as well. 1 ref., 6 figs., 1 tab.

  17. Computational fluid dynamics of collapsing bubble with micro-jet; Micro jet hassei zengo ni okeru kiho naigai nagareba no suchi kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Doihara, R.; Mori, S. [Kyushu University, Fukuoka (Japan); Takahashi, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1998-09-25

    The mechanisms of cavitation bubble near a rigid wall are analyzed numerically by using CIP and C-CUP method. Our scheme is useful for such complicated two-phase flow, which solves simultaneously both gas and liquid phases. Calculated micro-jet shows quick motion through the bubble towards the wall as expected by experimental observation. It should be noted that every transient phenomenon succeeding the first bubble collapse could well simulated, for example, the second expansion, second collapse, attachment to the wall, and second micro-jet. Our results suggest the important role of the second collapse as the cause of the erosion problem. The toroidal bubble and the vortex ring around it are also obtained after second collapse and found to stay for quite a long time. 16 refs., 5 figs.

  18. Utilization of the waste water of the steaming and boiling water on the tea processing; Cha seizo kotei ni okeru haishutsusui no yukoriyo

    Energy Technology Data Exchange (ETDEWEB)

    Tezuka, M.; Doi, S. [Shizuoka Industrial Research Institute of Shizuoka prefecture, Shizuoka (Japan); Kuramoto, M.

    1995-09-01

    To utilize the waste water of the steaming water on the green tea processing and the boiling water on the caffeine-less tea processing, the antibacterial and anti odor effects of the water condensate were investigated. The results were as follows; (1) The volume of the steaming water and the boiling water obtained on the tea processing was 0.02 t and 8.4t per a day. (2) The amount of catechism in the steaming water and boiling water was 193 ppm and 87 ppm. (3) To concentrate the steaming water, a rotary evaporating method was better than a hotplating and an ultrafiltrating methods. (4) The antibacterial effect of the boiling water condensate was indicated at a concentration of 1% catechism in a laboratory experiment. (5) In a fish processing industry, the antibacterial effect was not recognized at a concentration of 1% catechism flooded with the condensate on the floor. (6) The antiodor effect the condensate was not recognized at a concentration of 1% catechism above the floor in the fish processing industry. (7) The antiodor effect was expressed at a concentration of O.5% catechism sprayed with the condensate in a space of a pet food processing industry. 2 figs., 8 tabs.

  19. Report on the field test project for wind power development at Kamiyaku Town (wind characteristics investigation); Kamiyakucho ni okeru furyoku kaihatsu field test jigyo (fukyo seisa) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Wind characteristics are observed for a year at the above town located at the northern end of the Yakushima island, Kagoshima Prefecture. The exponential index of the wind speed distribution in the vertical direction is 6.06 with all the directions averaged, and is so high as 8.4/13.6 in the wind directions (W/E). Prudence should be exercised, when to estimate the wind speed at the wind turbine hub altitude, against disjunction from the simple exponential law due to geographical peculiarities of the observation location. Turbulence intensity is low and is 0.15 when the wind speed is 2m/s or more, not exerting an ill effect on wind power development. As for the total wind direction occurrence rate on the prevalent wind axis, 78.2% is recorded, which is much higher than the reference value (60%). The average wind speed on this wind axis is high, and this shows that the location is quite suitable for wind power development. The annual average wind speed of 6.3m/s is much higher than the reference value, this again promising a success. The wind energy density of 478W/m{sup 2} is sufficiently high, as compared with the reference value (215W/m{sup 2}). Since there are possibilities of a maximum instantaneous wind speed of over 60m/s, caution is to be used in determining wind endurance for the wind turbine design. The annual capacity ratios for the 150/300/750kW wind turbine models are 33.8/36.5/36.9%, respectively, higher than the NEDO-provided reference value (17% or higher) and predicting sufficient power generation. (NEDO)

  20. Report on the field test project for wind power development at Oshima Village (wind characteristics investigation); Oshimamura ni okeru furyoku kaihatsu field test jigyo (fukyo seisa) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Wind characteristics are observed for a year at Oshima City, Fukuoka Prefecture. The annual average wind speed is 6.7m/s at 20m above ground, reflecting the general trend in Japan's climate that wind is strong in the cold season and weak in the warm season. The wind direction occurrence rate is the highest of 13.2% in the ENE direction. Now that the occurrence of the NE, SW, and WSW directions occupying the same wind axis is also high throughout the year, Oshima Village is suitable for wind turbine installation. Since the wind speed is high in the high-occurrence NE-ESE directions, the relation between the wind direction occurrence rate and wind speed is said to be convenient. The conditions for a success in wind power development, that the wind speed be 5.8m/s or more and energy density 215W/m{sup 2} or more at an altitude of 20m above the ground, are satisfied at this observation station. As for the operation rate and capacity ratio of each of 150kW, 300kW, and 750kW wind turbine models, they are all over the reference values. The site is highly promising as a wind power development site because all the wind turbine availability conditions, such as the annual average wind speed, annual wind energy density, operating rate, and capacity ratio are found to be better than the reference values.

  1. Investigation on the actual energy consumption by office automation devices used in offices; Office ni okeru OA kiki no energy shohi jittai chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    With an objective to further improve efficiency of power demand by office automation devices and suppress increase in the power demand, investigations were carried out on the actual power consumption by office automation devices, and discussions were given on energy saving effects in the office automation devices. In the investigations, measurements were conducted for small offices as the subject thereof with regard to electric power consumed by such presentation tools and their peripheral devices as personal computers, word processors, copying machines, facsimile machines, electronic whiteboards and overhead projectors. Power consumption particularly in a standby condition was also investigated. As a result of the investigations, the following characteristics were revealed: the number of office automation devices used to deal with the Energy Star is increasing rapidly; power consumption believed to have been reduced by the Energy Star transferring to lower power consumption is estimated to be 3% in average for personal computers, 26% for copying machines, and 68% for facsimile machines; and while facsimile machines are left in operating condition for 24 hours, their operation rate at night is very low, wherein there is a large room for saving energy in this time band. 65 figs., 21 tabs.

  2. Temperature dependence of the mechanical quality factor of piezoelectric ceramics in PZT systems; PZT kei atsuden ceramics ni okeru kikaiteki hinshitsu keisu no ondo izonsei

    Energy Technology Data Exchange (ETDEWEB)

    Sato, K.; Ise, O.; Tamura, M.; Otsuki, T. [Tokin Corp., Sendai (Japan)

    1998-06-01

    The relationship between the piezoelectric properties of a cylindrical vibrator and performance of a vibratory gyroscope was examined using an equivalent circuit model. The temperature stability of the gyroscope depended mainly on temperature variation of mechanical quality factor Qm. The temperature dependence of Qm at -40degC - +80degC was investigated for the PbTiO3-PbZrO3-Pb(Mn1/3Sb2/3)O3 and the binary PZT with acceptor additives. It was found that Qm peaked at a certain temperature. With decrease in Pb(Mn1/3Sb2/3)O3 or acceptor additives, the Qm peak shifted toward higher temperature and was reduced. The sharp transient variation in Qm with stepwise temperature change, which is termed as thermal shock in the present study, was exaggerated as temperature approached the Qm peak temperature. The thermal shock of Qm was mainly due to that of resonant resistance R1. 3 refs., 9 figs., 1 tab.

  3. Measurement of nonlinear AC dissipation current waveform in oil-film composite insulating system. Abura-film fukugo zetsuenkei ni okeru hisenkei koryu sonshitsu denryuhakei no kansoku

    Energy Technology Data Exchange (ETDEWEB)

    Tokoro, T. (Gifu National College of Technology, Gifu (Japan)); Nagao, M.; Kosaki, M. (Toyohashi University of Technology, Aichi (Japan))

    1991-01-15

    Nonlinear AC dissipation current waveforms associated with a Garton effect were observed on an oil-film composite insulating system by the previously reported measuring method of dissipation microcurrent waveforms in AC electric fields. A laminated composite of polypropylene and oxidized insulating oil was used as a specimen, and dielectric loss tangents (tan {delta}) were measured by applying AC voltage of 50-400Hz to it. The tan {delta} increased up to a peak value with the applied voltage, and its peak point shifted toward a high voltage side decreasing the peak value with an increase in frequency, indicating the influence of a Garton effect. The amplitude of AC dissipation current waveforms associated with a Garton effect increased up to a peak value with the applied voltage corresponding to the tan {delta}, and the phase of the peak point delayed with an increase in frequency. As a result, the generation behavior of nonlinear AC dissipation current could be observed through applied voltage and frequency as parameters. 5 refs., 6 figs.

  4. Measurements of turbulent velocity profiles in combined system of polymer additives and riblets; Kobunshi tenkazai to riblet tono fukugokei ni okeru ranryu sokudo bunpu no sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Mizunuma, H. [Tokyo Metropolitan Univ., Tokyo (Japan); Ban, T. [Hino Motors, Ltd., Tokyo (Japan)

    2000-03-25

    In the combined system of polymer additives and riblets, the polymer additives expand the range of non-dimensionalized riblet width s{sup +} where the riblets reduce the frictional drag. Although in the higher region of s{sup +} the riblets increase the frictional drag as the rough surface, the polymer additives thicken the wall layer, which dumps the drag increase due to riblets and then gives the benefical combined effect in this higher region of s{sup +}. Based on this scinario, the velocity profile and the pipe frictional coefficient for the combined system were derived from the velocity profile of each system. The turbulent velocity profiles were measured for the combined system using a laser Doppler velocimetry. The measured results agreed well with the derived prediction for the combined system. (author)

  5. Development of natural gas in the South American region and internationalization of a market thereof; Nanbei chiiki ni okeru tennen gasu kaihatsu to shijo no kokusaika

    Energy Technology Data Exchange (ETDEWEB)

    Niwa, N. [Japan Petroleum Development Association, Tokyo (Japan); Terada, S. [Mitsubishi Research Institute, Inc., Tokyo (Japan)

    2000-09-01

    Recently, natural gas development in the South American region is actively advanced. Especially, southern countries have formed the customs union 'Mercosur' (the South America south cooperation market), and an energy supply network such as the natural gas pipeline has been formed with the integration of the market. In this paper, a present state of development project, an installment balance situation, a production situation, a relation infrastructure and a trend of the market of natural gas in South America especially each country of the southern district are described. And, the introduction of foreign capital is also advancing with the restructuring related to the natural gas business in these countries. Therefore, those trends are also described. In the South American countries, Argentina has abundant natural gas reserves which is the next quantity to Venezuela, and has coped with the development of natural gas since early times. According to the prediction of future demand trend of natural gas, Argentina, Bolivia and Trinidad Tobago are mentioned as an exporter of natural gas, and Brazil and Chile are mentioned as an importer of natural gas. (NEDO)

  6. Wet process technology in the semiconductor manufacturing process. 1. Physics and chemistry of wet cleaning process; Handotai process ni okeru wet process. Wet senjo no butsuri kagaku

    Energy Technology Data Exchange (ETDEWEB)

    Ryuta, J. [Mitsubishi Materials Corp., Tokyo (Japan)

    1995-03-05

    The wet cleaning consists of a cleaning process in chemicals and a rinse process using ultra-pure water. Among a series of cleaning process, this paper focuses on the SC1 (standard cleaning 1) process using NH4OH, H2O2, and H2O. During the SC1 process, two reactions progress simultaneously, i.e., natural oxidation and etching reactions on the wafer surface. As a consequence of measurement of the oxide film thickness, it was found that the reaction rate during the initial oxidation is extremely high. As a result of measurement of the etching rate, it was also found that the etching reaction is affected by the oxidation reaction. It is illustrated that pits, which are caused by defects in the crystal, are formed during the repeated SC1 process. It is also illustrated that the adsorption and desorption of Fe occur simultaneously on the wafer surface during the SC1 process. It was found that a clean wafer surface can be obtained by removing the particles and metal impurities in the cleaning liquid. 10 refs., 12 figs., 1 tab.

  7. Combustion characteristics of lean limit flame propagation in a long tube under microgravity; Bisho juryokuka ni okeru enkannai kihaku genkai kaen denpa no nensho tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Kawakami, T.; Okajima, S. [Hosei University, Tokyo (Japan). Faculty of Engineering; Sato, J. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Sakuraya, T. [Japan Space Utilization Promotion Center, Tokyo (Japan)

    1998-10-25

    Studies on combustion of extremely lean hydrocarbon-air mixtures are very important from the viewpoint of pollution control which are prompting the development of new types of combustors and internal combustion engines. However, accurate data on combustion characteristics of such mixtures are scarce owing to difficulties inherent in conventional measuring techniques. It is well known that the flame behavior is strongly affected by buoyancy under normal gravity. This becomes more critical in the vicinity of flammability limits where flame propagation velocities are very low. Consequently, data such as flammability limits obtained under normal gravity are unreliable. In this experimental investigation carried out with a quiescent mixture contained in a long tube, flame stability and buoyancy effects in the vicinity of flammability limit have been determined. Furthermore the study has been extended to include the effect of surface roughness on flame propagation. The experimental results show that, (1) Under microgravity, an axially symmetrical flame propagation is possible in a long tube, even at mixture conditions near the flammability limits and the combustion characteristics can be accurately determined using this method, (2) Propagation velocity with the rough surface is higher than with the smooth surface. 9 refs., 10 figs., 2 tabs.

  8. Liquid phase behavior in an emulsified fuel droplet burning under microgravity; Bisho juryoku ka nyuka nenryo ekiteki nenshoji ni okeru ekisono kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Segawa, D.; Tanaka, H.; Hoshito, K.; Kadota, T. [University of Osaka Prefecture, Osaka (Japan); Yamasaki, H. [Ehime Univ., Ehime (Japan). Faculty of Education

    2000-05-25

    An experimental study has been carried out to obtain the detailed information needed for the deep understanding of the combustion process of an emulsified fuel droplet under microgravity. The experiments were conducted by using the drop shaft of JAMIC (Japan Microgravity Center) at Hokkaido. Photographic observation and temperature measurement were made of the emulsified fuel droplet burning in quiescent gaseous environment at the atmospheric pressure. The primary attention was toward the transport processes in the liquid phase and the time histories of liquid temperature and the amount of water in the liquid phase during the period of time prior to the microexplosion. The results showed that the agglomeration and separation of the water and the base fuel layers occurred with the lapse of time. The increase in the temperature of the emulsified fuel resulted in the formation of a single water droplet enveloped by a shell of base fuel prior to the microexplosion. After the phase separation, selective evaporation of the base fuel would occur and the volume of base fuel decreased while the water volume did not change. The effects of the water volume on the onset rate of microexplosion were also revealed. (author)

  9. Application of streaming potential method for detection of fractures in granitic rock; Kamaishi kozan ni okeru ryutai ryudo den`iho tekiyo shiken

    Energy Technology Data Exchange (ETDEWEB)

    Negi, T.; Yokoi, K.; Yoneda, Y. [Nittetsu Mining Co. Ltd., Tokyo (Japan); Senba, T. [Power Reactor and Nuclear fuel Development Corporation, Tokyo (Japan)

    1996-05-01

    Measurements were made using the streaming potential method for the purpose of investigating the expansion of hydration cracks, direction of their propagation, and the chaining of cracked surfaces, in the granitic rock. Tests were conducted by use of a bore hole in the gallery wall. The bore hole yielded approximately 400 liters of water per minute, the bore hole was closed and then opened, and the change with the passage of time in the spontaneous potential (SP) on the gallery wall was measured. At a spot 31.2m from the mine entrance, the SP dropped by 15mV simultaneously with the opening of the bore hole, and rose by 14mV simultaneously with the closure of the same. The phenomenon was true for other locations, that is, for the section from the mine entrance to a spot 9.0m therefrom, and for a section beginning at 15.0m and ending at 19.2m therefrom. No change in the SP was observed in a group of cracks with water springing out of the gallery roof, beginning at a point 40m and ending at a point 54m from the mine entrance. The result suggests the possible application of the streaming potential method to the investigation of cracks. 1 ref., 10 figs.

  10. Flow characteristic of Hijiori HDR reservoir from circulation test in 1991; Koon tantai Hijiori jikkenjo ni okeru senbu choryuso shiken (1991 nendo) kekka to ryudo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Shiga, T.; Hyodo, M.; Shinohara, N.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

    1996-05-01

    This paper reports one example of flow analyses on a circulation test carried out in fiscal 1991 at the Hijiori hot dry rock experimental field (Yamagata Prefecture). A fluid circulation model was proposed to simulate an HDR circulation system for a shallow reservoir (at a depth of about 1800 m) demonstrated in the circulation test by using an electric circuit network (which expresses continuity impedance in resistance and fluid storage in capacitance). Storage capacity of the reservoir was estimated by deriving time constant of the system from data of time-based change in reservoir pressure associated with transition phenomena during the circulation test. The storage capacity was estimated separately by dividing change of storage in the reservoir by change in the reservoir pressure. To derive the storage in the reservoir, a method to calculate non-recovered flows in the circulation test was utilized. The results of evaluating the reservoir capacity in the shallow reservoir using the above two independent methods were found substantially consistent. 3 refs., 6 figs., 1 tab.

  11. Magnetotelluric investigation in and around southern part of Hidaka metamorphic belt in Hokkaido, Japan; Hidaka henseitai nanbuiki ni okeru MT kansoku

    Energy Technology Data Exchange (ETDEWEB)

    Sato, H.; Utsugi, M.; Hirano, K.; Doi, T.; Nishida, Y.; Arita, K. [Hokkaido University, Sapporo (Japan)

    1996-05-01

    An MT observation was conducted in the Hidaka district, Hokkaido, for the estimation of the 2D resistivity structure in the southern part of the metamorphic belt, when frequencies of the VLF, ELF, and ULF bands were used. An approximately 42km-long traverse line was set to cross the Hidaka metamorphic belt from east to west. As for the observation points, 48 VLF points, 16 ELF points, and 4 ULF points were provided. During the data processing, impedance tensor was calculated in the frequency domain for the determination of the apparent resistivity relative to frequency and the phase difference. As the result, it was found that there is a fairly large resistivity gap between observation spots MNS and KWR and that the boundary corresponds to the Hidaka metamorphic belt, that the metamorphic belt that is reflected as a conspicuous high-resistivity layer in the VLF-, ELF-MT slopes down toward the east and has a distribution as deep as 10km in the vicinity of observation point KWR, that this high-resistivity layer sandwiches a low-resistivity layer at a depth of 5-7km, and that on the east side of the metamorphic belt there is a medium-resistivity layer creeping under the belt from the east side toward the west side. 5 refs., 6 figs.

  12. Flow characteristics of Hijiori HDR reservoir form circulation test in 1995; Koon tantai Hijiori jikkenjo ni okeru shinbu choryuso yobi junkan shiken (1995 nendo) kekka to ryudo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Fukushima, N.; Hyodo, M.; Shinohara, N.; Takasugi, S. [Geothermal Energy Research and Development Co. Ltd., Tokyo (Japan)

    1996-05-01

    This paper reports the result of a preliminary circulation test conducted in fiscal 1995 on a deep reservoir (at a depth of about 2200 m) in the Hijiori hot dry rock experimental field. One water injection well and two production wells were drilled to constitute a circulation loop, to which the circulation test was performed to investigate the flow characteristics thereof. The result revealed the following matters: total amount of injected water of 51500 m{sup 3} resulted in a total fluid recovery rate of about 40%; as a result of well stimulation given twice during the initial stage of the water injection, the continuity impedance in the vicinity of the injection well decreased largely (however, the continuity improvement upon the second attempt was considerably inferior to that from the first attempt); and increase in the water injection amount does not necessarily lead to increase in the production amount. The paper describes additionally that it is extremely difficult to interpret non-linearity between the injection and production amounts by using a model prepared previously with a main objective to analyze the Hijiori HDR circulation system. 1 ref., 9 figs., 1 tab.

  13. 2D resistivity survey in complex geological structure area. Application to the volcanic area; Fukuzatsuna chishitsu kozo chiiki ni okeru hiteiko nijigen tansa. Kazangan chiiki deno tekiorei

    Energy Technology Data Exchange (ETDEWEB)

    Asakawa, S.; Ikuma, T.; Tanifuji, R. [DIA Consultants Co. Ltd., Tokyo (Japan)

    1996-05-01

    Introduced herein is an application of 2D resistivity survey to a volcanic rock area where the survey result is difficult to interpret because of its complex geological structure. In a dam site survey, main problems involve the permeability of water through faults and weathered, altered zones. At this site, a 2D resistivity survey was conducted, a 2D geological structure was deduced from the resistivity section, and the result was examined. It was found that resistivity distribution was closely related to hydrographic factors, but no obvious correlation was detected between rock classes and R, Q, and D. In conducting investigations into a section planned for a highway tunnel, it was learned that the problem was a volcanic ash layer to collapse instantly upon absorbing water, and the distribution of the ash layer, not to be disclosed by boring, was subjected to a 2D resistivity survey. The survey was conducted into the structure above where the tunnel would run, and further into the face, and studies were made about what layer was reflected by the resistivity distribution obtained by analysis. The result of the analysis agreed with the details of the layer that was disclosed afterward. 4 figs., 1 tab.

  14. Education for hydraulics and pnuematics in Department of Computer Science, Faculty of Information Sciences, Hiroshima City University; Hiroshima shiritsudaigaku ni okeru yukuatsu kyoiku

    Energy Technology Data Exchange (ETDEWEB)

    Sano, M. [Hiroshima City University, Hiroshima (Japan)

    2000-03-15

    Described herein is education of hydraulics and pneumatics in Hiroshima City University. Department of Computer Science is responsible for the education, covering a wide educational range from basics of information processing methodology to application of mathematical procedures. This university provides no subject directly related to hydraulics and pneumatics, which, however, can be studied by the courses of control engineering or modern control theories. These themes are taken up for graduation theses for bachelors and masters; 2 for dynamic characteristics of pneumatic cylinders, and one for pneumatic circuit simulation. Images of the terms hydraulics and pneumatics are outdated for students of information-related departments. Hydraulics and pneumatics are being forced to rapidly change, like other branches of science, and it may be time to make a drastic change from hardware to software, because their developments have been excessively oriented to hardware. It is needless to say that they are based on hardware, but it may be worthy of drastically changing these branches of science by establishing virtual fluid power systems. It is also proposed to introduce the modern multi-media techniques into the education of hydraulics and pneumatics. (NEDO)

  15. Population dynamics of bacteria for phosphorus removal in sequencing batch reactor (SBR) activated sludge processes. Kaibunshiki kassei odeiho ni okeru datsu rin tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Okada, M.; Ueno, Y.; Lin, C.; Murakami, A. (Tokyo University of Agriculture and Technology, Tokyo (Japan))

    1990-01-10

    As the phosphorus removal processes, chemical methods and biological methods are considered. This paper discussed a biological phosphorus removal method. Laboratory experiments of phosphorus removal in sequencing batch reactor (SBR) activated sludge processes were operated using synthetic waste water to clarify the effects of solid retention time (SRT) and organic substrates on the accumulation of bacteria having phosphorus removal ability (bio-P-bacteria). The accumulation of bio-P-bacteria was enhanced by large fluctuation in concentration of organic substances in the reactor fed in a short period of time under anaerobic condition. However, the accumulation did not be enhanced in the reactor operated with SRT less than 25 d. The specific growth rates of bio-P-bacteria were estimated to a range from 0.033/d to 0.035/d in the SBR activated sludge processes fed with glucose and polypeptone as substrates. Therefore, large SRT is necessary for the accumulation of bio-P-bacteria. 18 refs., 10 figs., 1 tab.

  16. Dissemination of information and evacuation plan in volcanic disaster of Mt. Fugen in Unzen; Unzen Fugendake no kazan saigai ni okeru joho dentatsu oyobi hinan taisaku

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Fujii, M. [Nagasaki University, Nagasaki (Japan). Faculty of Engineering

    1997-06-20

    The paper investigated the information dissemination system and evacuation plan in the volcanic disaster of Mt. Fugen in Unzen of Nagasaki prefecture. The measures against the pyroclastic flow were not taken because of too much sticking to the scenario 198 years ago. The information dissemination and evacuation system had not well been prepared and had to be dependent upon the man power. For working out disaster prevention measures, it is necessary to have members from cities and towns join from the beginning. Informing the danger of the pyroclastic flow of people by the Coordinating Committee for the Prediction of the Volcanic Eruption of the Meteorological Agency was not thoroughly and widely made. The pyroclastic flow hazard map was effectively used for the first time for the setting up of warning areas, but it is necessary to make it public prior to the disaster. Since the headquarters for dealing with the disaster which advise evacuation and set up warning areas was inexperienced, there was confused information at the beginning. The prior detailed simulation by the institutes concerned and experts is indispensable. At present, watching and data collection/dissemination system are remarkably arranged, and the human damage is also eliminated. In addition to hardware such as watch camera and wire sensor, there are a lot of problems such as organization, preparation of activity manuals, unification of cooperation/connection among wide areas/organizations. 14 refs., 8 figs., 20 tabs.

  17. Temperature effect on corrosion fatigue strength of coated ship structural steel; Zosen`yoko tosozai no fushoku hiro kyodo ni okeru ondo no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Takanashi, M.; Fuji, A.; Kojima, M.; Kitagawa, M. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan); Kobayashi, Y. [Ship Research Inst., Tokyo (Japan); Kumakura, Y.

    1997-08-01

    The corrosion fatigue life was obtained using uncoated and tar epoxy resin specimens to clarify the temperature effect. The life curve for corrosion fatigue of machined and uncoated steel in the air and sea was obtained. The fatigue strength of uncoated steel largely decreases in the sea and breaks even in the nominal stress range of less than 1/2 of the fatigue limit in the air. The effect of temperature on the coated steel is represented by a corrosion coefficient. The steel coated at 25{degree}C is 1/1.03 to 1/1.13 at 40 to 60{degree}C. This showed that the fatigue strength decreases when the temperature exceeds 25{degree}C. However, it has not such tendency and significance that are represented quantitatively. There is a slight difference in the short-life area between the crack generation life and breaking life. However, the long-life area has no significance that influences the whole evaluation. In the long-life corrosion fatigue, the crack occurs from the corrosion pit due to the exposure below the coated film and progresses in the base material before the coated film is destroyed. The effect of the corrosion pit remarkably appears at a low-stress level. 14 refs., 14 figs., 4 tabs.

  18. Resistance inception characteristics of Bi2223/Ag superconducting tape for ac large current; Koryu daidenryu tsudenji ni okeru Bi2223/Ag chodendo tepu senzai no teiko hassei tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Hayakawa, N.; Iwahana, F.; Okubo, H. [Nagoya Univ., Nagoya (Japan)

    2000-05-29

    Alternating current characteristics of the superconductive tape wire rod and resistance occurrence characteristic in the overcurrent energization become the importance, when research and development of the high-temperature superconductive electric power equipment is activated. We energized the Bi2223/Ag superconductivity tape wire rod this time, and the resistance occurrence characteristic was investigated in respect of 60Hz alternating current large current over the direct current critical current value. (NEDO)

  19. AC losses in parallel conductors (6) -dependence of the distance between strands; Chodendo heiretsudotai ni okeru koryu sonshitsu (6). Sosenkan kyori no eikyo.

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, H.; Kajikawa, K.; Iwakuma, M.; Funaki, K. [kyushu Univ., Fukuoka (Japan)

    2000-05-29

    Since dislocation parallel conductor was considered best as a composing method for large current capacity oxide superconductor, its electromagnetic phenomena were examined, and magnetic field amplitude dependency, frequency dependency deviation dependency of dislocation position have been already clarified on additional AC losses with deviation of dislocation position. In this study, The effect of the change of distance between elementary wires of 2-wire parallel conductor on magnetic flux density distribution was examined from practical and theoretical sides. The investigation results on magnetic density distribution produced by shield current showed that, though magnetic flux density was constant inside parallel conductor if distance between centers of elementary wires was small, it became small in the center if distance was increased. In future, this distance dependency is planned to be quantitatively verified by measuring combination constants and additional AC losses of parallel conductor. (NEDO)

  20. Measurement of AC losses in superconducting wires under external transverse magnetic field; Chodendo senzai no gaibu yoko jikai ka ni okeru koryu sonshitsu sokutei

    Energy Technology Data Exchange (ETDEWEB)

    Kakiuchi, T.; Arakawa, K.; Kawabata, S.; Sumiyoshi, F. [Kagoshima Univ., Kagoshima (Japan)

    2000-05-29

    The quantitative evaluation of ac loss characteristics of the superconducting wire material is very important, when little-loss design of the superconducting wire rod and application to the superconductive equipment are considered. Though in the case of this loss measurement in the pick-up coil method, the solenoidal coil state does the winding of the material wire rod, the loss characteristic measured by the interaction between winding changes, when coil shape such as roll pitch and number of layers of the sample coil change. Then, the purpose of this study is to clarify the effect of the shape of the sample coil to the loss characteristic in loss measurement under the outside transverse field by the pick-up coil method. (NEDO)

  1. Influence of pinning parameters on the ac loss in high-T{sub c} Superconductors; Koon chodendotai no koryu sonshitsu ni okeru pinningu parameta no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, K.; Fujiyoshi, K. [Kumamoto Univ., Kumamoto (Japan); Yamafuji, K. [Ariake National College Tech., Fukuoka (Japan); Kisu, T. [Kyushu Univ., Fukuoka (Japan). Dept. of Systems Engineering

    2000-05-29

    It is indispensable to estimate the ac loss, when exchanges and utilizes the high temperature superconductor. For the reason, analysis of the field distribution in the superconductor is necessary. In Bean Model used in the alloyed superconductor, in case of the high temperature superconductor, it cannot accurately evaluate the distribution, since it complicatedly changes. In this paper, the computer analyzed field distribution of high temperature superconductor as the pinning parameter changes using the nonlinear current-voltage characteristics model in which high temperature superconductor is peculiar numerically, and ac loss was evaluated. In addition, it carried out the theoretical evaluation of the ac loss using the model in which Bean model was made to consider the frequency dependence. (NEDO)

  2. AC-flux penetration into high-temperature superconductors with hall effects 3; Koon chodendotai ni okeru koryu jiba shinnyu to horu koka 3

    Energy Technology Data Exchange (ETDEWEB)

    Mawatari, Y. [Electotechnical Laboratory, Tsukuba (Japan)

    1999-11-10

    On the basis of equation of motion of line of magnetic flux considering Hall effect, linear alternating current response of line of magnetic flux for minute alternating magnetic field parallelly applied to dc magnetic field has been analyzed theoretically. It has been reported that as the result, in the super clean condition, it is a base of the high frequency as GHz, and that effective mass, resonance phenomena, excitation of standing wave, elliptic motion of line of magnetic flux of line of magnetic flux, etc. can generate various and new phenomena. This time, alternating magnetic field dc magnetic field it theoretically rotational magnetic field line of magnetic flux spiral motion helicon resonance it. (NEDO)

  3. Reversible motion of flux lines and AC losses in high-temperature superconducting tapes; Koon chodendo tashin tepu senzai ni okeru jisoku no kagyaku undo to koryu sonshitsu

    Energy Technology Data Exchange (ETDEWEB)

    Matsushita, T.; Otabe, S. [Kyushu Inst. of Tech., Fukuoka (Japan). Dept. of Computer Science and Electronics

    2000-05-25

    The possibility of reducing AC losses in superconducting Bi-2223 tapes with the aid of the reversible motion of flux lines is investigated. It was found that the AC loss was reduced by reducing the size of superconducting filaments, and the behavior was explained by the theoretical model of Campbell. To get a sufficient reduction of AC losses at 77.3 K from the prediction using the critical state model, it is necessary to reduce the filament thickness below 2.5 {mu}m. (author)

  4. AC-flux penetration into high-Tc superconductors with hall effects 2; Koon chodendotai ni okeru koryu jiba shinnyu to horu koka 2

    Energy Technology Data Exchange (ETDEWEB)

    Mawatari, Y. [Electrotechnical Laboratory, Tsukuba (Japan)

    1999-06-07

    It has been confirmed that high temperature superconductor can become the superclean condition in which mean free path is abnormally long in the scattering time of the quasiparticle in the nucleus of line of magnetic flux. Though in this condition, the Hall effect concerning magnetic flux motion remarkably appears, we have not studied it until now on pinning and AC characteristic which together considered Hall effect of line of magnetic flux. For this, we analyzed linear alternating current response of line of magnetic flux for minute alternating magnetic field on the basis of equation of motion of line of magnetic flux considering Hall effect theoretically, and line of magnetic flux had effective mass in the superclean condition, and it was reported that resonance phenomenas were generated in the last time. This time, we carried out magnetic flux motion, alternating magnetic field invasion and more and more detailed analysis on the alternating current permeability, and we examined new possibility of the phenomenon such as elliptic motion of line of magnetic flux and excitation of standing wave. (NEDO)

  5. Impact pressure of water in hydraulic descaling during hot strip mill rolling. Netsukan atsuen ni okeru koatsusui datsu scale ji no shototsu atsu

    Energy Technology Data Exchange (ETDEWEB)

    Wada, T.; Oshimi, M. (Nippon Steel Corp., Tokyo (Japan)); Ueda, M. (Hotani Co. Ltd., Osaka (Japan))

    1991-09-01

    Using white Plasticine which shows plastic deformation similar to that of high temperature steel materials, the decrease in the thickness by high pressure water is measured, and impact pressure of water at the time of high pressure water injection is measured with a pressure converter to formulate the relationship with various factors. The thickness loss of Plasticine at the time of high pressure injection is closely correlated with 4 parameters, i.e. water consumption, water pressure, rolling speed, and vertical distance. The thickness loss and impact pressure by hydraulic descaling can be expressed by empirical formulas of {Delta}t = 2000 PV (vH{sup 2}) (cm, correlation coefficient: 0.94) and p = 5.64 PV H{sup 2} (MPa). The impact pressure equation is simple and practical, and agrees well with the result obtained by the equation of Hojas et al. The impact pressure required to remove the primary scale is much higher than that required for the secondary scale, and a careful set up of the conditions is essential to complete the descaling. 13 refs., 7 figs., 7 tabs.

  6. Effect of applied synthetic auxin on root growth in plantlet propagation by cuttage and tissue culture; Sashiki to soshiki baiyo ni okeru gosei auxin rui no shiyo koka

    Energy Technology Data Exchange (ETDEWEB)

    Shoji, K.; Yoshihara, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-12-01

    The effect of synthetic plant hormone 4-C1-IAA and TFIBA on root growth in plantlet propagation was clarified by the cuttage and the issue culture of strawberry seedling production. A periwinkle, vine, and azalea are the effect of 4-C1-IAA on root growth, and a promotion effect was recognized for rooting and root elongation. The concentration of 4-C1-IAA in which the growth promotion effect of a root most appears varies depending on the species of a plant. The concentration of a periwinkle was 20 ppm, and that of an azalea was 2000 ppm. The growth promotion effect of a root in 4-C1-IAA and TFIBA was compared with IBA for an azalea. The result showed that 4-C1-IAA is the same in the effect as IBA and that TFIBA is higher than for IBA. The growth of a vine`s terminal bud was promoted by the effect of TFIBA on root growth, and the callus occurring when IBA was treated was not formed. The rooting of a strawberry was promoted by the effect of TFIBA on root growth. The combined use of TFIBA and BA promotes the growth of a side bud and forms a multi-bud plant. However, rooting was inhibited. The callus caused by the effect of BA on root growth could be suppressed through the combined use with TFIBA. 6 refs., 7 figs., 2 tabs.

  7. Nonlinear process generating Tollmien-Schlichting waves in a reattached boundary layer; Hakuri saifuchaku nagare ni okeru T-S hado no hisenkei reiki katei

    Energy Technology Data Exchange (ETDEWEB)

    Asai, M.; Aiba, K. [Tokyo Metropolitan Institute of Technology, Tokyo (Japan)

    1995-09-01

    Low-frequency Tollmien-Schlichting (T-S) waves may be thought generated as a result of high-frequency disturbance between two proximity frequency modes grown unstably in a separation shear layer causing secondary nonlinear interference to occur. This fact has been verified by a numerical simulation. A non-compression Navier-Stokes equation was used for the fundamental equation, a tertiary windward difference for the convection term, and a secondary central difference for other differential calculus. The Reynolds number was 200, and the disturbance was introduced by applying `v` variation continuously on the wall face. Non-introduction of the disturbance results in a steady flow. Disturbance frequencies of 0.15 and 0.20 were selected as disturbance frequencies from the relationship between the spatial amplification and the frequency dependency. The structure of the excited disturbance agreed with the intrinsic mode. The difference mode due to nonlinear interference grows as the basic mode was amplified. The basic mode decays sharply in the boundary layer after reattachment, while the difference mode decays slowly. Distribution of the difference mode is a distribution of viscous T-S waves, which may be converted into the intrinsic mode. 8 refs., 7 figs.

  8. Photo-irradiation effects on GaAs atomic layer epitaxial growth. GaAs no genshiso epitaxial seicho ni okeru hikari reiki koka

    Energy Technology Data Exchange (ETDEWEB)

    Mashita, M.; Kawakyu, Y.; Sasaki, M.; Ishikawa, H. (Toshiba Corp., Kawasaki (Japan). Research and Development Center)

    1990-08-10

    Single atomic layer epitaxy (ALE) aims at controlling a growing film at a precision of single molecular layer. In this article, it is reported that the growth temperature range of ALE was expanded by the vertical irradiation of KrF exima laser (248 nm) onto the substrate for the ALE growth of GaAs using the metalorganic chemical vapor deposition (MOCVD) method. Thanks for the results of the above experiment, it was demonstrated that the irradiation effect was not thermal, but photochemical. In addition, this article studies the possibility of adsorption layer irradiation and surface irradiation as the photo-irradiation mechanism, and points out that coexistence of both irradiation mechanisms can be considered and, in case of exima laser, strong possibility of direct irradiation of the adsorption layer because of its high power density. Hereinafter, by using both optical growth ALE and thermal growth ALE jointly, the degree of freedom of combination of hetero ALE increases and its application to various material systems becomes possible. 16 refs., 6 figs.

  9. Vortex-induced vibrations of circular cylinder in cross flow at supercritical Reynolds numbers; Chorinkai Reynolds su ryoiki ni okeru enchu no uzu reiki shindo

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, T.; Nakao, T.; Takahashi, M.; Hayashi, M.; Goto, N. [Hitachi, Ltd., Tokyo (Japan)

    1999-07-25

    Vortex-induced vibrations were measured for a circular cylinder subjected to a water cross flow at supercritical Reynolds numbers for a wide range of reduced velocities. Turbulence intensities were changed from 1% to 13% in order to investigate the effect of the Strouhal number on the region of synchronization by symmetrical and Karman vortex shedding. The reduced damping of the test cylinder was about 0.1 in water. The surface roughness of the cylinder was a mirror-polished surface. Strouhal number decreased from about 0.48 to 0.29 with increasing turbulence intensity. Synchronized vibrations were observed even at supercritical Reynolds numbers where fluctuating fluid force was small. Reduced velocities at which drag and lift direction lock-in by Karman vortex shedding were initiated decreased with increasing Strouhal number. When Strouhal number was about 0.29, the self-excited vibration in drag direction by symmetrical vortex shedding began at which the frequency ratio of Karman vortex shedding frequency to the natural frequency of cylinder was 0.32. (author)

  10. Fiscal 1998 research report. Feasibility survey on offshore wind power generation in Japan; 1998 nendo chosa hokokusho. Nippon ni okeru yojo furyoku hatsuden no donyu kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This survey studied the feasibility of large-scale offshore wind power generation in Japan. Attempt was also made on preparation of outline maps of offshore wind around Japan. The cost of future offshore wind power generation systems is roughly dependent on technical issues and environmental issues. As technical issues, 'installation site,' 'foundation,' 'system interconnection' and 'maintenance/management' were summarized based on applications in Europe. As a result, it was clarified that technical issues can be solved with existing technologies to a certain extent, however, those relate to economical problems closely. The previous environment impact assessments say that wind power generation has no problems on the environmental issues. As relatively strong wind coastal areas, the outline maps of offshore wind point out Western Hokkaido area, Japan Sea area of Tohoku district, Pacific ocean area of the central part of Honshu, Genkai Nada area, Western Kyushu area and Southwest islands area, and suggest that these areas are promising for offshore wind power generation. (NEDO)

  11. Relationship between distribution of Annealida and sedimental condition in the Seto Inland Sea; Setonaikai ni okeru kankei dobutsu (Annelida) no seisoku jokyo to teishitsu kankyo no kankei

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, K. [Okayama Prefectural Institute for Environmental Science and Public Health, Okayama (Japan)] Imatomi, Y. [Yamaguchi Prefectural Research Institute of Health, Yamaguchi (Japan)] Komai, Y. [Hyogo Prefectural Institute o Environmental Science, Kobe (Japan)] Nagafuchi, O. [Fukuoka Institute of Health and Environmental Sciences, Fukuoka (Japan)] Seiki, T. [Hiroshima Prefectural Institute of Public Health and Environment, Hiroshima (Japan)] Koyama, T. [Wakayama Prefectural Research Center of Environment and Public Health, Wakayama (Japan)

    1998-11-10

    The distribution of Annelida division members and the conditions of their habitats are investigated across the Seto Inland Sea. The conventional method of dividing the sea into 13 areas is modified, and the sea is now divided into 425 areas. The macrobenthos found in the top layer soil at 425 sites are classified and identified, and referred to the items in the checklist, with special attention focused on Annelida division members. All the dominant macrobenthos species in all the sea areas are found to be organic pollution indicator species. Sixteen kinds of Spionidae family members are observed in great numbers, belonging to the Annelida division. The number of Annelida individuals in the total number of macrobenthos individuals is different when the sea area is different, occupying 0-100%. The number of kinds and of individuals of the Annelida division tend to increase with a decrease in the level of IL, COD (chemical oxygen demand), T-N (total nitrogen), T-P (total phosphorus), or TOC (total organic carbon), and to decrease with an increase in Cd, Cu, Pb, Zn, or Mn in the bottom sediment. The number of kinds reached the maximum at an oxidation-reduction potential of +200 to +300mV. The organic pollution indicating Spionidae family belonging to the Annelida division are achieving dominance all over the inland sea by expelling the other benthos, and this justifies an inference that organic pollution is in progress in bottom sediments especially inside bays in the inland sea. 25 refs., 5 figs., 4 tabs.

  12. Effects of fuel and air mixing on WOT output in direct injection gasoline engine; Chokufun gasoline kikan ni okeru nenryo to kuki no kongo to shutsuryoku seino

    Energy Technology Data Exchange (ETDEWEB)

    Noda, T.; Iriya, Y.; Naito, K.; Mitsumoto, H.; Iiyama, A. [Nissan Motor Co. Ltd., Tokyo (Japan)

    1997-10-01

    The effects of in-cylinder charge motion and the characteristics of the fuel spray and piston crown shape on WOT output in a direct injection gasoline engine are investigated. The fuel and air mixing process in a cylinder is analyzed by computer simulation and LIF method visualization. As a result, the technical factors to achieve enough mixing in a DI gasoline engine equipped with bowl in piston optimized for stratified combustion are clarified. 7 refs., 9 figs., 1 tab.

  13. Experience on sampling silty soil at lower area behind the dune in Northern Niigata plain; Nigataheiya hokubu no sakyu kohai teichi ni okeru nenseido no sampling

    Energy Technology Data Exchange (ETDEWEB)

    Nagao, K.; Yoshida, M. [Japan Highway Public Corp., Tokyo (Japan)

    1998-05-01

    As for the construction of highway in Niigata Prefecture, study on the disturbance of silty soil samples during the ground investigation was carried out. Dune is deposited around the coastal area of Niigata plain and behind this, there is comparatively densely distributed soft ground. This silty soil of soft ground, during the construction of highway embankment, becomes a big problem while considering the embankment stability, particularly the strength characteristics of upper layer. Unconfined compression test using undisturbed sample collected from the boring hole was carried out widely as a general practical test because the ratio of fine particles content of silty soil under investigation this time was in general very high. As a result, as for the comparatively upper part silty soil, large breaking strain that can not be observed in adjacent area was observed and disturbance of the sample became the problem. In this report, cause for sample disturbance was studied from the point of view of physical properties related to deposition environment, and cutting method of sample for silty soil that can easily accept the disturbance and so forth were investigated. 3 refs., 8 figs.

  14. Effect of sulfur or hydrogen sulfide on initial stage of coal liquefaction in tetralin; Sekitan ekika shoki katei ni okeru io to ryuka suiso no hatasu yakuwari

    Energy Technology Data Exchange (ETDEWEB)

    Nakada, M. [Government Industrial Research Institute, Kyushu, Saga (Japan)

    1996-10-28

    It is well known that the solubilization of coal can be accelerated by adding sulfur or hydrogen sulfide during direct liquefaction of difficult coals. From the studies of authors on the coal liquefaction under the conditions at rather low temperatures between 300 and 400{degree}C, liquefaction products with high quality can be obtained by suppressing the aromatization of naphthene rings, but it was a problem that the reaction rate is slow. For improving this point, results obtained by changing solvents have been reported. In this study, to accelerate the liquefaction reaction, Illinois No.6 coal was liquefied in tetralin at temperature range from 300 to 400{degree}C by adding a given amount of sulfur or hydrogen sulfide at the initial stage of liquefaction. The addition of sulfur or hydrogen sulfide provided an acceleration effect of liquefaction reaction at temperature range between 300 and 400{degree}C. The addition of sulfur or hydrogen sulfide at 400{degree}C increased the oil products. At 370 and 400{degree}C, the liquid yield by adding sulfur was slightly higher than that by adding hydrogen sulfide, unexpectedly. The effects of sulfur and hydrogen sulfide were reversed when increasing the hydrogen pressure. 5 figs., 1 tab.

  15. Present state and future prospects in structural design and construction of high rise buildings; Chokoso kenchiku ni okeru sekkei seko gijutsu no genjo to sono shorai tenbo

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, S. [Mitsubishi Estate Co. Ltd., Tokyo (Japan)

    1994-12-05

    This paper reports the current state of design and construction of super high rise buildings quoting the case of Yokohama Landmark Tower as a central example, and describes the future prospects. Trends of load and stress in a super high rise building is such that the ratio of stress due to force in the axial direction occupying in the stress will increase with increasing height as can be understood if rectangular columns with different heights are compared. Axial force in a pillar acting against an earthquake may increase, but bending, shearing and beam stresses will remain unchanged. In buildings with heights of 250 to 300 meters, wind load stress can grow equivalent to or larger than an earthquake load stress. Designs standing on different concepts are required because of difference in the cycle and acting time of both stresses. At Yokohama Landmark Tower, many of the main frameworks were determined from the wind load, whereas 60-kg steels were used and the construction was carried out under elaborate controls. Since diversification of building shapes and ultra super high-rise construction are anticipated to be advanced in the future, expectations are focused on development of better high-strength steels, and automation and systematization in welding processes. 8 refs., 10 figs., 3 tabs.

  16. Combined process of pyrolyzer/combuster for gas production and power generation; Chugoku ni okeru chukibo hatsuden to toshi gas seizo no tame no fukugo process no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ooka, I. [The University of Tokushima, Tokushima (Japan); Ma, T.

    1997-10-30

    In China, they are using a lot of coal by direct firing for domestic cooking, space heating and industrial use. Therefore air pollution is the big problem in every cities in winter season. And at moment, they do not have enough infrastructure for supplying energy such as gas and electric power. There is a great need for facilities for supplying gas and electric power from coal in big cities with much less pollution. This paper d a combined process of medium size plant of gas production and power generation by using fluidized circulation bed pyrolizer and combuster, to contribute to the energy supply which greatly reduces air and water polution and coal consumption. 1 ref., 1 fig., 3 tabs.

  17. Confrontation with carbon dioxide problem in Agency of Industrial Science and Technology. Kogyo gijutsuin ni okeru nisanka tanso mondai eno torikumi

    Energy Technology Data Exchange (ETDEWEB)

    Nishimoto, M. (Agency of Industrial Science and Technology, Tokyo (Japan))

    1991-10-20

    Differently from the other global environment problems, the global warming must be confronted because the carbon dioxide exhausts mecessarily through the process of human activity and energy utilization. The status of such a confrontation is to be introduced together with that in research laboratories, Agency of Industrial Science and Technology. The worldwidely total quantity of energy to be supplied being generated by about 90% from coal, oil, matural gas and other fossil fuel, it becomes the most important problem how the sound growth of economy must be harmonized with the environmental maintenance. In an interministerial conference in 1990, the government made the decision that the quantity of carbon dioxide to be exhausted per person be planned to be restrictively stabilized on the level of 1990 from 2000 on. New energy and other innovative technologies making much more progress than it is expected, it was also decided that the best effort be made to stabilize the total quantity to be exhausted on the level of 1990. In 1989, research was commenced on the fixation technology of carbon dioxide through the artificial photosynthesis by the Agency of Industrial Science and Technology, which proceeds with innovative and leading R and D. 3 figs.

  18. New utilization and recall of carbon dioxide in domestic and foreign countries; Saikin no naigai ni okeru tansan gas no riyo to kaishu

    Energy Technology Data Exchange (ETDEWEB)

    Hanada, M.

    1994-09-01

    This paper summarizes the utilization technologies and recovery of carbon dioxide. Carbon dioxide is manufactured from such inorganic materials as carbonates and cokes, and such organic materials as hydrocarbons and alcohols. Carbon dioxide used in refreshing beverages is manufactured by sulfuric acid decomposition of sodium bicarbonate or limestone, pyrolysis of carbonates, natural gushing, and alcohol fermentation. Sodium carbonate is obtained by using the Solvay process that uses NaCl, NH3 and CaCO3 as the raw materials, but CO2 from hydrocarbons is utilized recently. The sugar industry uses slaked lime and CO2 in cleaning raw sugar concentrates. Grain size, shape, and grain size distribution of the precipitated calcium carbonate light obtained from reaction of slaked lime and CO2 are affected by reaction temperatures and concentrations. This precipitated calcium carbonate light is used in rubber filling, paper manufacturing, and plastics. South Africa and other countries manufacture gypsum for cement by using limestone and sulfuric acid as the raw materials. The annual dispersion of CO2 from fossil fuel consumption amounts to 5.2 billion tons. Discussed as its reducing measures include fixation by sea algae, adsorption, absorption and clathration by zeolite and monoethanol amine. 8 refs., 2 figs., 6 tabs.

  19. Report on survey of promotion of activities implemented jointly in China in FY 1997; 1997 nendo chosa hokokusho (Chugoku ni okeru kyodo jisshi katsudo no suishin chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Rapid economy growth has been observed in Asia including Japan. On the other hand, problems of population and environment grew even worse with the economic growth. Especially, China is the second CO2 emission country in the world. Large energy demand is still forecasted with its economic growth in the future. It is well-known that the energy consumption per unit GDP is very large. Therefore, it is very significant to promote the activities implemented jointly with China for mitigating the emission of greenhouse gases including CO2, which provides a significant meaning for solving global environmental issues as well as for improving regional environmental issues. It is necessary for the above to recognize the appropriate current situations and to promote the activities implemented jointly suitable for the country. Based on the discussions and information exchanges about environmental issues with staffs concerning environmental policies and scientists as well as the field surveys, methods for the activities implemented jointly were investigated to provide some proposals. 4 figs., 8 tabs.

  20. Proposal of control system of surface brightness of rolled sheet in cold rolling. Reikan atsuen ni okeru ita hyomen kotaku no seigyo system no teian

    Energy Technology Data Exchange (ETDEWEB)

    Azushima, A.; Iyanagi, Y.; Degawa, H.; Noro, K. (Yokohama National Univ., Yokohama, (Japan). Faculty of Engineering Daido Chemical Industry Co. Ltd., Tokyo, (Japan))

    1990-04-01

    The relation was systematically examined between the surface quality of a rolled sheet in cold rolling and tribological factors (rolling speed, reduction, viscosity of lubricant, surface roughnesses of a roll and sheet). In the case where the surface roughnesses of rolls and sheets were smooth, the surface brightness decreased with an increase in rolling speed and viscosity, resulting in rough surfaces. The dependence of the rolling speed, viscosity and roughness on the brightness was equal to that on an oil film thickness, and the brightness of rolled sheets could be thus expressed as the function of only the oil film thickness. In the case those were rough, the roughness had a great influence on the surface quality of rolled sheets, and the brightness could be expressed as the function of the oil film thickness and roughnesses of rolls and sheets before rolling. Based on these relations, the system was proposed capable of estimating and controlling the brightness of rolled sheets from/by conditions before rolling. 13 refs., 16 figs., 1 tab.

  1. Comparison of {gamma}-ray profile across active normal and reverse faults; Seidansogata to gyakudansogata katsudanso ni okeru hoshano tansa kekka no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Iwata, A.; Wada, N.; Sumi, H. [Shimada Technical Consultants, Ltd., Shimane (Japan); Yamauchi, S.; Iga, T. [Shimane Univ., Shimane (Japan)

    1996-10-01

    Active faults confirmed at trench and outcrop were surveyed by the {gamma}-ray spectrometry. The active fault found at trench is a normal fault, and that found at outcrop is a reverse fault. The {gamma}-ray spectral characteristics of these two types of faults were compared to each other. The normal fault is named as Asagane fault located in Aimi-machi, Saihaku-gun, Tottori prefecture. The reverse fault is named as Yokota reverse fault located in Yokota-cho, Nita-gun, Shimane prefecture. Rises of radon gas indicating the existence of opening cracks were confirmed above the fault for the normal fault, and at the side of thrust block for the reverse fault. It was considered that such characteristics were caused by the difference of fault formation in the tensile stress field and in the compressive stress field. It was also reconfirmed that much more information as to faults can be obtained by the combined exploration method using the total counting method and the spectral method. 14 refs., 7 figs.

  2. High-resolution aeromagnetic survey in the area of Arima-Takatsuki-Rokko active fault system; Arima Takatsuki Rokko katsudanso chiiki ni okeru komitsudo kuchu jiki tansa

    Energy Technology Data Exchange (ETDEWEB)

    Nakatsuka, T.; Okuma, S.; Morijiri, R.; Makino, M. [Geological Survey of Japan, Tsukuba (Japan)

    1996-10-01

    High-resolution aeromagnetic survey was conducted in December, 1995, over the area of Arima-Takatsuki-Rokko active fault system, where the 1995 Hyogo-South (Kobe) earthquake took place. Based on the surveyed data, the magnetic anomaly distribution in the Kei-Hanshin district was illustrated. Features of magnetic anomaly observed in it were discussed. Influence of artificial structures in the coastal zone of Kobe City was tried to be removed. Distinct magnetic anomaly observed in the center of Kyoto City was located at the southern part near Shijo-Karasuma. This was mainly affected by the artificial structure. A high magnetic anomaly with a long wave length was observed in the southern part of Kyoto. There was a high magnetic anomaly in an area surrounded by central cities of Nishinomiya-Toyonaka district. At the location where positive and negative magnetic anomalies were illustrated in NEDO`s map in the coastal zone of Kobe City, the anomaly pattern was clarified. The influence of artificial structure was approximated using a point dipole. The dipole was placed in each block having a magnetic anomaly. The parameter was determined by the inverse analysis, to remove the influence. Consequently, most of magnetic anomalies due to artificial structures could be removed. 6 figs.

  3. Change in surface SP caused by pressure buildup observed at the Nigorikawa geothermal area; Nigorikawa chiiki ni okeru atsuryoku buildup ji no shizen den`i henka

    Energy Technology Data Exchange (ETDEWEB)

    Yasukawa, K.; Yano, Y.; Matsushima, N.; Ishido, T. [Geological Survey of Japan, Tsukuba (Japan); Takahashi, M.; Suzuki, I.; Aoyama, K.; Kuwano, T.

    1996-10-01

    To examine the effect of change of subsurface flow system on the surface SP (self potential), SP measurements were carried out before and after the pressure buildup and drawdown during the periodic inspection at Nigorikawa area. Relation between the SP distribution and the observed data was also examined by 2-D numerical simulation. Tendency was found that the SP increased gradually with the production near the production well, decreased during the pressure buildup, and increased again during the drawdown. There were some points having the reverse tendency in the surrounding area. Behavior during the pressure buildup and drawdown was not clear. The resistivity near the ground surface was low ranging between 2 and 5 ohm/m within the Nigorikawa basin. The variation of SP was not so large when compared with the measuring error. The SP profiles on the secondary section passing in the center of caldera at the production stop and at one week after the production start were well corresponded with the profiles under natural conditions which were reproduces using the 2-D model. It was considered that the SP profile before the production stop was affected by the production. 12 refs., 6 figs., 1 tab.

  4. Seepage behavior of mud slurry on soil around pipe in using pipe jacking; Deisui kaatsu shiki suishin koho ni okeru chunyu deisui no chisan eno shinto kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, H.; Mastui, K. [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering

    1997-09-25

    In this paper, in order to clarify the seepage behavior and the influences on excavated soil of the mud slurry in using the mud pressured pushing method, based on results of model tests the applicability of Eulerian Lagrangian Analysis is confirmed. And, using this analysis method the seepage behaviors of mud slurry on soil are simulated. The results obtained are as follows. By using the Eulerian Lagrangain Analysis the seepage phenomena of the mud slurry on the soil in using the mud pressured pushing method can be clarified. The seepage behaviors on soils in which the mud slurry are injected are different depending on the mud slurry pressure and specific gravity of the mud slurry, so it is necessary to select suitable mud slurry pressure and specific gravity of the mud slurry corresponding to the site conditions. When the soil has a small slurry permeation, the injected mud slurry makes strong influences on it, but when the soil has a big slurry permeation, the injected mud slurry does not make influence on it and it is possible to form a thick mud screen around the pipe. 13 refs., 20 figs., 6 tabs.

  5. Behavior of pesticides in a paddy field with rapid water penetration; Koka shinto sokudo no hayai suiden ni okeru noyaku dotai

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, T.; Nakano, Y. [Tokyo Inst. of Tech., Tokyo (Japan). Dept. of Environmental Chemistry and Engineering

    2000-11-10

    The behavior of pesticides (dymron, mefenacet, bensulfuron-methyl) was measured and simulated in a paddy field with rapid water penetration. In the field experiment, the concentration of each pesticide in paddy water reached a maximum shortly after its application, and then diminished rapidly to a non-detectable level within three days. In paddy soil, the concentrations of dymron and mefenacet in the topsoil (from soil surface to 5 cm, 0-5 cm) were much higher than those in the subsoil (5-10 cm) four days after application, and their concentrations in both soils became almost the same after six days. On the other hand, a significant difference in the concentration of bensulfuron-methyl between the topsoil and the subsoil could not be observed. The behavior of pesticides in the paddy field was predicted well using a mathematical simulation model. It was found that transfer of pesticide with dissolution and penetration of water significantly contributed to the behavior of pesticides in paddy water, and the spatial distribution of the pesticides in paddy soil depended on the adsorbability of each pesticide. Dymron and mefenacet were shown to be spatially less mobile than bensulfuron-methyl because of their higher adsorbability. (author)

  6. Occurrence of irregular staining zone in partial coloring of beechwood utilizing selective penetration; Bunazai no shinto chakushoku ni okeru chakushoku mura no hassei

    Energy Technology Data Exchange (ETDEWEB)

    Yata, S.; Ishikawa, T. [Yokohama National University, Yokohama (Japan). Faculty of Education

    1997-04-15

    Panel is made from beechwood with a wide sap and with the early wood in the annual ring selectively colored, is dried, a penetration experiment is conducted, and then the panel is examined for zones of irregular staining and for the cause for such irregularity. It is widely known that a protective tylosis forms surrounding the affected part when a tree is wounded. Screening should be done before or during the lumbering work since a panel with injuries is not suitable as a material for penetrative coloring. It is suggested, for the prevention of tyloses, that the tree be felled in winter and be subjected to lumbering as soon as possible, that the lumber be immediately immersed in hot water 50{degree}C or higher or heated by steam so as to disable parenchymatous cells from producing tyloses. Although penetrative coloring adds industrial artistic values to timber, yet irregular coloring if any would seriously mar the apparent beauty. It is mandatory to suppress the emergence of tyloses by carefully choosing a proper tree and to perform lumbering and heat treatment promptly after falling the proper tree. 16 refs., 6 figs., 2 tabs.

  7. Coal conversion rate in 1t/d PSU liquefaction reactor; 1t/d PSU ekika hannoto ni okeru sekitan tenka sokudo no kento

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, K.; Imada, K. [Nippon Steel Corp., Tokyo (Japan); Nogami, Y.; Inokuchi, K. [Mitsui SRC Development Co. Ltd., Tokyo (Japan)

    1996-10-28

    To investigate the coal liquefaction characteristics, coal slurry samples were taken from the outlets of the reactors and slurry preheater of NEDOL process 1 t/d process supporting unit (PSU), and were analyzed. Tanito Harum coal was used for liquefaction, and the slurry was prepared with recycle solvent. Liquefaction was performed using synthetic iron sulfide catalyst at reaction temperatures, 450 and 465{degree}C. Solubility of various solid samples was examined against n-hexane, toluene, and tetrahydrofuran (THF). When considering the decrease of IMO (THF-insoluble and ash) as a characteristic of coal conversion reaction, around 20% at the outlet of the slurry preheater, around 70% within the first reactor, and several percents within the successive second and third reactors were converted against supplied coal. Increase of reaction temperature led to the increase of evaporation of oil fraction, which resulted in the decrease of actual slurry flow rate and in the increase of residence time. Thus, the conversion of coal was accelerated by the synergetic effect of temperature and time. Reaction rate constant of the coal liquefaction was around 2{times}10{sup -1} [min{sup -1}], which increased slightly with increasing the reaction temperature from 450 to 465{degree}C. 3 refs., 5 figs., 1 tab.

  8. Survey of the actual state of the coal related research and development in Japan. 11; Nippon ni okeru sekitan kanren kenkyu kaihatsu jittai chosa. 11

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    NEDO is surveying the actual state of the coal related research/development in Japan to supply information on the coal related research/development in Japan to IEA`s coal research project database. This book of fiscal 1997 version includes 338 subjects. The details described are name of research institute, the section in charge, address, name of country, telephone No., name of joint researcher, research theme, classification, outline of research, project No., name of researcher, sponsor, the budget appropriated, term of research, remarks, etc. The books of data collected from each country in surveys of the actual state of the coal related R and D and IEA`s coal researches which have been made so far are submitted for general viewing at NEDO Information Center. Also, a part of those can be accessible from the energy database of which NEDO Information Center is performing on-line service for user members

  9. Application of low pressure plasma spray technique to heavy duty gas turbine. Hatsuden yo gas turbine ni okeru gen prime atsu plasma yosha gijutsu no tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Tsuji, I.; Takahashi, K.; Hirota, N. (Mitsubishi Heavy Industries, Ltd., Tokyo (Japan))

    1990-12-25

    Efficiency of gas turbine depends upon many factors and turbine inlet gas temperature is one of them. In order to obtain high efficiency, it is necessary to increase turbine inlet gas temperature. As the above temperature becomes higher, the surface treatment by plasma spray has been applied as the technique for thermal insulation, antifriction, and hot corrosion resistance. In this article, the low pressure plasma spray (LPPS) equipment, Swiss make, which the Takasago Plant, Mitsubishi Heavy Industries introduced in 1986 and the other one introduced likewise later, the features of LPPS coating and examples of application of LPPS are stated. Concerning LPPS, its powder particle has big impact energy because of its very high flying velocity, hence dense coating is obtained. In case when metallic powder is sprayed, no contamination of the powder is made by oxidation during the spray, and the amount of oxide in the coating is extremely few. Mechanical strength and corrosion resistance of the coating is better than those of atmospheric pressure spray (APS). LPPS is applied to hot corrosion resisting coating and insulation coating, etc. of turbine blades, etc.. 12 figs.

  10. Report on the field test project for wind power development at Yajima Town (wind characteristics investigation); Yajimamachi ni okeru furyoku kaihatsu field test jigyo (fukyo seisa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    Wind characteristics are observed at Yajima Town, Akita Prefecture, in the period November 1997 through October 1998. The wind speeds are 5.4m/s and 4.5m/s at altitudes of 20m and 10m above the ground, respectively. They are high in winter and the seasonal difference is great. The wind direction occurrence rate is the highest in the WNW and next in the W under the 16 compass point system, and the two directions prevail except in July and September. The wind direction occurrence rates on the wind axis total as high as 74.0%, offering great convenience to the installation of multiple wind turbine systems. The occurrence rate up to the wind speed of 6m/s or more occupies 10% or more, and the wind speed is higher in wind directions that occur oftener. The intensity of turbulence in wind speed is 0.22 where the average wind speed is 2m/s or higher, and 0.19 where it is 4m/s or higher. The annual operation rate of wind turbines are reckoned to be 65% or higher. The amounts of energy to be collected by the 150kW, 300kW, and 750kW machines are, respectively, 356,563kWh, 837,822kWh, and 2,178,380kWh. Their annual capacity ratios are to be 27.6%, 32.4%, and 33.7%. The figures are rather low for wind turbines on the Japan Sea side of the Tohoku district, but service operation is feasible, dependent upon conditions. It is expected that the installation of wind turbines will do but a little harm on the environment they find themselves in. (NEDO)

  11. Numerical method to calculate flow-induced vibration in turbulent flow. 3rd Report. Analysis of vortex-induced vibration in an array of elastically supported tubes; Ranryuba ni okeru ryutai kozotai rensei shindo kaiseki shuho no kaihatsu. 3. Kangun ni okeru uzu reiki shindo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Sadaoka, N.; Umegaki, K. [Hitachi, Ltd., Tokyo (Japan)

    1996-01-25

    A vortex-induced vibration of an array of elastically supported tubes is simulated in two-dimension by using a flow-induced vibration analysis program, which was developed in order to evaluate flow-induced vibration in various components such as heat exchangers. From a comparison of calculated results and experimental data, the following points are observed. (1) For the calculated results in a 5 {times} 5 square array, the flow pattern surrounding the first-row tubes is markedly different from that observed in the second-row or third-row tubes. This flow pattern is the same as that obtained from the experiment. (2) All tubes begin to oscillate due to unsteady fluid force and the oscillating mode is different for each row of tubes. These oscillation patterns show the same tendency in the experiments and it is concluded that the developed method can simulate vortex-induced vibration in an array of elastically supported tubes. 19 refs., 10 figs., 1 tab.

  12. Bridging exchange bias effect in NiO and Ni(core)@NiO(shell) nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Rinaldi-Montes, Natalia, E-mail: nataliarin@gmail.com [Departamento de Física, Universidad de Oviedo, E-33007 Oviedo (Spain); Gorria, Pedro [Departamento de Física & IUTA, EPI, Universidad de Oviedo, E-33203 Gijón (Spain); Martínez-Blanco, David [Servicios Científico-Técnicos, Universidad de Oviedo, E-33006 Oviedo (Spain); Fuertes, Antonio B. [Instituto Nacional del Carbón, CSIC, E-33080 Oviedo (Spain); Fernández Barquín, Luis [CITIMAC, Facultad de Ciencias, Universidad de Cantabria, E-39005 Santander (Spain); Puente-Orench, Inés [Instituto de Ciencia de Materiales de Aragón, CSIC-Universidad de Zaragoza and Institut Laue-Langevin, BP 156, F-38042 Grenoble Cedex 9 (France); Blanco, Jesús A. [Departamento de Física, Universidad de Oviedo, E-33007 Oviedo (Spain)

    2016-02-15

    Among all bi-magnetic core(transition metal)@shell(transition metal oxide) nanoparticles (NPs), Ni@NiO ones show an onset temperature for the exchange bias (EB) effect far below the Néel temperature of bulk antiferromagnetic NiO. In this framework, the role played by the magnetism of NiO at the nanoscale is investigated by comparing the microstructure and magnetic properties of NiO and Ni@NiO NPs. With the aim of bridging the two systems, the diameter of the NiO NPs (~4 nm) is chosen to be comparable to the shell thickness of Ni@NiO ones (~2 nm). The EB effect in Ni@NiO NPs is attributed to the exchange coupling between the core and the shell, with an interfacial exchange energy of ΔE~0.06 erg cm{sup −2}, thus comparable to previous reports on Ni/NiO interfaces both in thin film and NP morphologies. In contrast, the EB detected in NiO NPs is explained in a picture where uncompensated spins located on a magnetically disordered surface shell are exchange coupled to the antiferromagnetic core. In all the studied NPs, the variation of the EB field as a function of temperature is described according to a negative exponential law with a similar decay constant, yielding a vanishing EB effect around T~40–50 K. In addition, the onset temperature for the EB effect in both NiO and Ni@NiO NPs seems to follow a universal dependence with the NiO crystallite size. - Highlights: • Comparison of the exchange bias effect in NiO and Ni(core)@NiO(shell) nanoparticles. • Universal temperature dependence of the exchange bias effect. • Suggested similar physical origin of the effect in both systems. • Size and crystallinity of the NiO shell hold the key for exchange bias properties.

  13. ZnNi data

    Science.gov (United States)

    2014-11-01

    information only) BE AMERICA’S BEST STRENGTH AND HONOR Additional LHE Zn-Ni Hydrogen Re-Embrittlement Testing  The original LHE Zn-Ni test...follows:  LHE Zn-Ni tank contamination • Spring ‘09 Lab analysis showed organic contamination • The PVC tank liner had begun to break down and had...to be replaced in the Summer ‘09 with a more robust grade of PVC liner • Two years operating with new liner with no problems  Inconsistent plating

  14. OpenNI cookbook

    CERN Document Server

    Falahati, Soroush

    2013-01-01

    This is a Cookbook with plenty of practical recipes enriched with explained code and relevant screenshots to ease your learning curve. If you are a beginner or a professional in NIUI and want to write serious applications or games, then this book is for you. Even OpenNI 1 and OpenNI 1.x programmers who want to move to new versions of OpenNI can use this book as a starting point. This book uses C++ as the primary language but there are some examples in C# and Java too, so you need to have about a basic working knowledge of C or C++ for most cases.

  15. Cavitation performance of cylindrical choke for unsteady flow. Case of long choke with sharp-edged corner; Hiteijoryu ni okeru entogata shibori ni hasseisuru cavitation tokusei. Sharp edge wo motsu shiboribu no nagasa ga nagai baai

    Energy Technology Data Exchange (ETDEWEB)

    Aoyama, Y.; Yamamoto, M.; Koike, N.; Matsuoka, Y. [Kinki University, Osaka (Japan). Faculty of Science and Engineering; Watanabe, N. [Kinki University, Osaka (Japan)

    1998-10-25

    This paper deals with an experimental study on the unsteady cavitation performance in a long cylindrical choke with the sharp-edged corner. The unsteady flow takes the trapezoid form with time at the downstream of a choke. Experiments are carried out for four kinds of the choke diameter d under various rates of the pressure changes while keeping the choke length l and the upstream pressure p1 constant. The main objective of this study is to find four kinds of the critical cavitation numbers k{sub ci}, k{sub cci}, k{sub cd} and k{sub ccd} for three each location within a choke and only k{sub ci}, k{sub cd} for the outlet of choke: the incipient cavitation number k{sub ci}, the desinent one k{sub cd}, the cavitation number k{sub cci} of `beginning of choking`, which is the value at the moment which the full bubbles begin to appear in a choke, the cavitation number k{sub ccd} of `end of choking`, which is the value at the moment which the full bubbles in a choke begin to collapse. It has been clarified that each value of four kinds of these numbers depends on each location within the choke, the ratio of pressure change and the choke diameter. 4 refs., 10 figs., 1 tab.

  16. Considerations on FEM modeling in analyzing buckling and plastic collapse of a detection control; Boto panel no zakutsu sosei hokai kaiseki ni okeru FEM model ka ni kansuru kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yao, T.; Fujikubo, M.; Yanagihara, D.; Irisawa, M. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

    1997-10-01

    Buckling and plastic collapse of upper decks and bottom outer plates of a hull results directly in longitudinal bending collapse of the hull. Therefore, discussions were given on analysis for pressure destruction strength of a detection control panel which assumes an upper deck and a bottom outer plate. Pressure destruction behavior of the panting panel is a complex phenomenon accompanying non-linearity and geometrical non-linearity of the materials. Its whole phenomenon may be analyzed by using the finite element method (FEM) as a principle, but the analysis is not efficient. Therefore, considerations were given in relation to modeling when using the FEM. The considerations were given on a panel attached with flat steel panting members with respect to the modeling scope which considers the buckling mode according to the aspect ratio of the panel partitioned by the deflection control members. If the local buckling mode of the panel is an even number wave mode in the longitudinal direction, a triple span model is required. A modeling scope for a case of being subjected to water pressure and in-plane compression was considered on a panel attached with angle-type steel members having non-symmetric cross section. In this case, a triple bay model is more preferable to reproduce the behavior under water pressure loading. 1 ref., 6 figs.

  17. Effect of partial oxygen pressure on the formation of Bi-2223 phase in the partial-melting and sintering process; Hanyoyu {center_dot} shoketsuho ni okeru Bi-2223 so no seisei ni oyobosu sanso bunatsu no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Lu, X.; Nagata, A.; Sato, N.; Sugawara, K.; Kamada, S. [Akita Univ., Akita (Japan). Faculty of Engineering and Resource Science

    1999-06-07

    It is expected that that the control of the crystalline orientation that the minute sample is obtained the melting process in bulk material fabrication process of the oxide superconductivity body is possible, etc. are advantageous and that it is very advantageous for high Jc of the Bi system superconductor. Though the sintering of generation and orientation of the Bi-2223 phase was done until now from the melt state solidification we, we examined it, and here, we examined the effect of the oxygen on the generation of the Bi-2223 phase in a half melting and sintering process. (NEDO)

  18. Researches regarding a constructing problem of a PV system. Part 1. Conscious investigation by means of a questionnaire survey; Taiyoko hatsuden system ni okeru kenchikuteki shomondai no kenkyu. 1. Anketo chosa ni yoru ishiki chosa

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, Y.; Yamazaki, R.; Kuroki, T. [Kogakuin University, Tokyo (Japan)

    1996-10-27

    The installation and introduction of photovoltaic power generation systems (PVS) in buildings are growingly expected in the construction field from now, coupled with the marketing of a solar cell module as a product for a construction material in the form of an external wall or a roof material for example. For this purpose, it is necessary at first to summarize problems that may arise at the time of or after the installation of PVS as a product. This paper examines an opinion poll, degree of recognition, current problems, etc., of PVS as a result of a questionnaire survey given to engineers and architects engaged in the actual construction business. The degree of recognition and interest was very high. Consultation or request for PVS installation was much more than predicted in numbers. Roughly 50% of the respondents reacted positively for the future installation request of PVS and, combined with the respondents who answered to look into the installation tentatively, not less than 90% were of a forward-looking opinion. The 85% of the respondents was not aware of the monitor business system for residential PVS. Further, the survey clearly brought out the importance of cost problems. 1 ref., 11 figs., 3 tabs.

  19. Study on heat collector of the solar system utilizing outdoor air. Experimental results in cases of cold and warm regions; Gaiki donyushiki solar system no shunetsubu ni kansuru kenkyu. Kanreichi to ondanchi ni okeru shunetsu jikken to kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Komano, S.; Ebara, Y. [OM Solar Association, Shizuoka (Japan); Wada, H. [Wada Building Constructors Co. Ltd., Hokkaido (Japan)

    1996-10-27

    An experiment on heat collection was made in the heat collector of a solar system utilizing outdoor air in cold and warm regions. In this system, outdoor air is heated by the air circulation layer on the roof exposed to solar radiation. The heated air is supplied to the object space for heating and ventilation. In the experiment in a cold region, the heat collection characteristics can be adjusted by putting a baffle plate in the air duct according to the experiment of a glass heat collector. The heat collecting air layer on only the iron roof may leak or freeze in the region subject to coldness or heavy snowfall. Therefore, preheat forms the space of a garret, and the preheat temperature comparatively becomes low. The data in which the heat collection characteristics can be adjusted using only a glass heat collector is required corresponding to the regional situation. In the experiment in a warm region, an experiment was made inclusive of the preheat for which outdoor air is absorbed at the eaves. As a result, the heat collection characteristics of preheat were improved. Moreover, a heat collection temperature of about 60{degree}C was obtained on the heat collection surface including the preheat. 1 ref., 12 figs., 3 tabs.

  20. Effects of applied stress and plastic strain on. gamma. r reversible. epsilon. martensitic transformation in high Mn alloy polyctystals. Ko Mn tetsu gokin takessho ni okeru. gamma. r reversible. epsilon. martensite hentai ni oyobosu gairyoku to hizumi no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Tomota, Y.; Piao, M.; Hasunuma, T.; Kimura, Y. (Ibaraki Univ., Ibaraki (Japan))

    1990-06-20

    The influences of applied stress and plastic strain on a transformation austenite ({gamma}) to hcp martensite ({epsilon}) were studied on Fe-16wt%Mn, Fe-24wt%Mn, and Fe-24%Mn-6%Si alloy, and a transformation mechanism and a shape memory phenomenon were more deeply examined. As the quenching structure of three kinds of the alloys consists of two phases of {gamma} and {epsilon}, the specimens were cooled after heated above the A {sub f} temperature to keep {gamma} single phase, and then the tensile tests were carried out. Positive temperature dependence was found under the 0.2% proof stress due to stress-induced {gamma}{yields} {epsilon} transformation in each of Fe-Mn alloy and Fe-24%Mn-6%Si alloy. When {gamma} phase of Fe-24%Mn alloy stabilized due to cyclic transformation was stretched at room temperature, the yield stress was remarkably lowered by the stress-induced {gamma}{r arrow}{epsilon} transformation. When the specimens were stretched at 523K under stress which was larger than the yield strength and then cooled, the elongation along the applied stress direction due to martensitic tranformation was recognized. A shape recovery was remarkable in Si content alloys. 22 refs., 5 figs.

  1. Softening and hardening by. gamma. yields. epsilon. martensitic transformation during deformation in high Mn steels. Ko Mn tetsu gokin ni okeru. gamma. yields. epsilon. martensite hentai ni yoru nanka to koka

    Energy Technology Data Exchange (ETDEWEB)

    Tomota, Y.; Ryufuku, S.; Piao, M. (Ibaraki University, Ibaraki (Japan). Faculty of Engineering)

    1991-01-15

    In high Mn steel, martensitic transformation of gamma to epsilon occurs under the ordinary pressure. Its application comprises utilization of its configuration memory properties and high work hardening characteristics. The present report studied, by using Fe-Mn type alloy, added with Si or Co, the influence of martensitic transformation of gamma to epsilon on the deformation behavior. Tensile test, 2mm/min in speed, being made on molten/cast alloy ingot, thermally treated as specified, epsilon was quantitatively analyzed by X-ray diffraction. The above test/analysis pointed out many notes in result and knowledge, as follows among others: The addition with Si or Co, lowering the Neel temperature, quantitatively increases the epsilon martensite, produced by the processing. The produced quantity of epsilon martensite in case of addition with Si is small, as compared with that in case of two-element Fe-Mn type alloy without addition and in case of addition with Co. All the tested alloys give the softening phenomenon by the martensitic transformation of gamma to epsilon. The pre-existing epsilon plate is a strong barrier for the further plastic flow, which accordingly accelerates the work hardening. 20 refs., 10 figs., 1 tab.

  2. Borehole geophysics for delineating the geological structure in the Sakonishi prospect, the Hida area, Japan; Hida chiiki Sako nishi chiku ni okeru boring ko riyo butsuri tansa ni yoru chishitsu kozo kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, H.; Hishida, H.; Yoshioka, K. [Metal Mining Agency of Japan, Tokyo (Japan)

    1997-05-27

    In order to discuss effectiveness of physical exploration in the Sakonishi prospect in the Hida area, physical exploration was carried out by utilizing bored wells. This area contains the Kamioka mine, one of the major base metal mines in Japan, where electrical exploration has been attempted several times in the past. No effective results have been obtained, however, because specific resistance contrast between mine beds and base rocks is too small, and the topography is too steep making site workability inferior. As part of the investigations on geological structures over wide areas, electrical logging (specific resistance and natural potential) was performed in fiscal 1995 and 1996 by utilizing the boreholes. Induced polarization logging was also conducted on the same boreholes. A traverse line on the ground with a length of 600 m and boreholes were used to execute specific resistance tomography. Clear extraction was possible on a fault structure which is thought related with limestone distribution and mine bed creation. However, it was not possible to identify upward continuity of zinc ores expected in the exploration. Because of not large a specific resistance contrast between zinc ores and base rocks, it is difficult to find mine bed locations only from the information on the specific resistance. 5 refs., 5 figs., 1 tab.

  3. Study on the evaluation method of debris flow and the hillside landslide scale of debris flow in nazardous torrent; Dosekiryu kiken keiryu ni okeru hokai kibo no hyoka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, S. [National Defense Academy, Kanagawa (Japan); Ishikawa, Y. [Public Works Research Inst., Tsukuba (Japan); Mizuyama, T. [Kyoto Univ., Kyoto (Japan). Faculty of Agriculture; Furukawa, K. [Yamaguchi Univ., Yamaguchi (Japan). Faculty of Engineering; Araki, Y. [Chuden Engineering Consultants Co. Ltd., Hiroshima (Japan)

    1995-09-20

    Among natural disasters, earth and sand disaster, such as landslide, landslip, and so forth, including debris flow occurs all over the country every year. Among the earth and sand disasters, debris flow disaster presents the most large destructive power phenomenon, producting the most mass of earth and sand. The debris flow has a following characteristics, translation distance of earth and sand is long and the mass of earth and sand is carried away owing to take in unstable earth and sand deposited on torrent floor with flowing, therefore, the damage is very wide rangs to downstream area. An investigation of debris flow in hazardous torrent was conducted all over the country which estimated the degree of risk in debris flow. From the investigation, debris flow was evident in a lot of mountain torrents. In this study, the present evaluation on the degree of risk in debris flow was examined and the evaluation method of debris flow and hillside landslide scale which was used land map as the only factor, for example, the east area of Nagasaki City that was mostly damaged by debris flow in July, 1982, were proposed. 13 refs., 13 figs., 7 tabs.

  4. Geological process of the 1997 Sumikawa landslide with hydrothermal explosions and debris avalanche, Akita prefecture; Akitaken Sumikawa onsen ni okeru jisuberi to suijoki bakuhatsu ni tomonau dosha saigai no hassei process

    Energy Technology Data Exchange (ETDEWEB)

    Tsukamoto, H. [Geological Survey of Japan, Tsukuba (Japan)

    1997-07-01

    Discussions were given on the geological process of the 1997 May Sumikawa landslide with hydrothermal explosions and debris avalanche in Akita Prefecture. Items of time-series information on the event include portent phenomena related to the landslide up to May 10, observation data identifying seismic motions from the landslide and hydrothermal explosions, power failure considered to have been caused by the event, statements of eyewitnesses who have seen the hydrothermal explosions from up in the sky and aerial photographs, witnesses by news reporters, and videos. When these items of information are discussed from the viewpoint of geologists, some anxiety may be applied to future measures against similar disasters. Out of the earth and sand of 500,000 m {sup 3} flown out from the landslide area, the amount flown out as an earth and sand flow is much smaller than the amount flown out as debris avalanche. Debris avalanche moves at much higher speed than that of the earth and sand flow, so that an earth and sand flow detection system using wire sensors may not be capable of warning people of timely evacuation. The debris avalanche induced from such hydrothermal explosion as the present one requires an observation system composed of a real-time long-cycle microtremor detection system and steam amount monitors. 5 refs., 6 figs., 5 tabs.

  5. Study on construction of temporary dwellings and problems caused by living long time on Hanshin-Awaji Great Earthquake; Hanshin / Awaji daishinsai ni okeru okyu kasetsu jutaku no secchi to chokikan shiyo suru baai no kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Nakamura, Y. [Nagasaki Univ. (Japan)] Shimizu, Y. [Kumagai Gumi Co. Ltd., Tokyo (Japan)

    1998-10-20

    Two years after the above-titled earthquake, an examination was performed on inhabitants in the temporary dwelling houses in Kobe, center of the calamity, and problems caused by a long stay there were clarified together with a grasp of the evolving problems by comparing the result of survey carried out immediately after the disaster. The number of such temporary dwelling houses amounted to 29,128 within Kobe City and 3,168 outside of the city. According to the room arrangement, they were either one f 4 types : 2-rooms with a kitchen, 1 room with a kitchen, dormitory and those specifically for aged persons. There were 59,449 applications at the first offer of 2,702 houses. The priority of their assignments and so on are explained. As for the housing structure, numerous complaints concerned with the room temperature, noise and so forth. As for the living environment, lack of nearby commodity shop, omission of transportation access, ill drainage of the housing sites were pointed out and the matters of demand to the local authorities included the installation of mail post and street lights. As for the health management, insomnia, stiff shoulder, lumbago and other bad physical conditions were revealed. The financial difficulty and the high house rent were obstacles to migrate to other places. The prolonged temporary lives worsened the apprehension of dwellers for the earthquake, typhoon, fire and alike. Some features for the calamity are described in comparison with the result of survey on those who were compelled to live under similar conditions by the eruption of Mr. Fugen. 6 refs., 13 figs., 15 tabs.

  6. Fiscal 1997 survey of the overseas coal import base preparation/improvement. Survey of a coal flow in China; 1997 nendo kaigaitan yunyu kiban seibi sokushin chosa. Chugoku ni okeru coal flow ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper surveyed the preparation of the coal transportation infrastructure, status of its running, economical efficiency, etc. in terms mainly of the trend of coal production/consumption in China, and coal railroad/water transportation and electric power transportation by mine-mouth power generation. From the survey, the following conclusions were obtained. As to the coal which China uses as a main energy for maintaining the present high economic growth as targeted, there will remain the coal transportation problem between production site (north and west) and consumption site (east and south) still in the future (in 2000 and 2010). China is now facing with a big turning point in a socioeconomic aspect. The advancing opening market policy brought steep rises in energy prices such as coal and electric power, which is affecting various fields. Further, the energy related laws, which were unprepared, are abruptly being prepared, and the environment for the introduction of foreign investment, which is expected to be accelerated, is being prepared. In the future, attention should be paid to environmental problems such as air pollution, acid rain and global warming. 48 figs., 96 tabs.

  7. Research and survey report of FY 1997 on the CO2 balance for high-temperature CO2 fixation and utilization technology; 1997 nendo chosa hokokusho (nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The purpose of this research is to clarify the application condition and effectiveness of high-temperature CO2 fixation and utilization technology. To evaluate the present process, it was compared with others, such as separation using a polymer membrane, physico-chemical absorption process, adsorption process, hydrogen contact reduction process, and biological fixation. The development trends of absorption, membrane, adsorption, and cryogenic separation were investigated. The questionnaire was carried out about the separation technologies which are in the stage of performance test using actual gas, to arrange and compare the data and information. The current trends of chemical and biological CO2 fixation and utilization technology were also investigated for arranging the subjects. High-temperature CO2 disposal by the carbonation in concrete waste has been studied, to clarify its application conditions and effectiveness. In order to compare the separation technologies, treatment processes of CO2 in the exhaust gas from boilers of LNG power generation and coal fired power generation were simulated. These processes were simulated by ASPEN PLUS for the modeling. Trends of application of ASPEN PLUS and collection of information were surveyed by participating in the ASPEN WORLD. 103 refs., 51 figs., 55 tabs.

  8. Estimation of shallow ground structure using short-period microtremors array observation. Results in Morioka area; Tanshuki bido no array kansoku ni yoru senbu chika kozo no suitei. Moriokashiiki ni okeru kekka

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, H.; Obuchi, T.; Saito, T.; Iwamoto, K. [Iwate University, Iwate (Japan). Faculty of Engineering; Yoshida, Y. [OYO Corp., Tokyo (Japan)

    1996-05-01

    The velocity structure in the shallow ground structure was evaluated by observing microtremors of 1-10Hz in the Morioka City area. Plural wave sections free of vehicle noises or the like were selected out of the collected microtremor records, and the Fourier spectrum and coherence were calculated. Records sufficiently supporting the correlation between seismographs were chosen for the analysis. The phase velocity was calculated for each observation spot from plural array records by use of the F-K spectrum. The underground velocity structure was estimated by the inversion process using the matrix method. In this method, an early model was built on the basis of the observed phase velocity and the optimum underground velocity structure was determined by alternately performing two inversion processes: one for the case wherein the S-wave velocity is the sole parameter and the other for the case wherein the layer thickness is the sole parameter. As the result, a shallow underground velocity structure, which has good agreement with the available boring data in the Morioka City area, was successfully estimated, verifying the validity of this method. 4 refs., 7 figs.

  9. FY1995 high techniques of measuring for sensation, cognition arid behavior in the man-products-environment interface; 1995 nendo seihin kankyo interface ni okeru kankaku ninchi kodo keisoku kodoka ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    We measure the distribution of activation locus of brain cortex area and its time-sequence against various kinds of stimulus by using the fMRI that can visualize directly brain activities. Next, we try to make a simulation model of the information processing system of brain, and aim at establishment of new evaluation index for environment-human interface based objectively or quantitatively on brain activity data. we challenged to examining quantitatively brain activities by using functional MRI instrumentation technique. We made a effort to acquire functional MRI technique by repetition of pilot studies, and were successful in visualization of visual cortex (primary sensory area). In the latter period, sensory areas whose function had not been studied sufficiently and higher functional areas of brain which related to memory, attention and emotion were studied. The identification of action locus of gustatory area was tried using functional MRI studies. In studies about the ability of spatial attention, experiments elucidating locus participating in space perception and attention and its function were advanced. It was suggested that activation locus of brain was different between a color-form matched stimulus and a mismatched stimulus. The MRI measurement added the information of musculoskeletal system to the current analysis of human body configuration and gesture character, and a more detailed analysis of human body became possible. This is, an useful analysis was suggested by a plan of shoes pattern. (NEDO)

  10. Time domain electromagnetic method for petroleum exploration. Part 3. Case study in Yoneyama area; Sekiyu tansa ni okeru TDEM ho data shutoku to kaiseki ni tsuite. 3. Niigataken Yoneyama chiiki deno tekiyorei

    Energy Technology Data Exchange (ETDEWEB)

    Ishikawa, H.; Mitsuhata, Y. [Japan National Oil Corp., Tokyo (Japan); Shiga, N. [Mitsui Mineral Development Engineering Co. Ltd., Tokyo (Japan)

    1996-05-01

    The result is reported of a TDEM method-based survey for oil exploration conducted in the Yoneyama district, Niigata Prefecture. The survey covered the southern part of the sedimentary basin in the prefecture, known for the poor quality of the seismic prospecting data that had been recorded. The purpose of the TDEM method-assisted survey was to probe the high-resistivity volcanic rock structure and low-resistivity sedimentary layer, and to know their details. The obtained data were subjected to interpretation by use of the 1D inversion method. A 4000m-deep level was subjected to interpretation, 34 data were inputted, and the early model consisted of 20 layers. As the result, it was found that there was a high-resistivity layer ranging from the ground surface down to a depth of approximately 500m, that a low-resistivity layer 2500-3000m in thickness lay thereunder, and that the lowest layer had a high resistivity of approximately 100 Ohm m. By comparing these data with the geological structure, structures were disclosed corresponding to the rock bed depth, Ukawa syncline, Ishiguro anticline, and Yoneyama mountain mass. 3 refs., 10 figs., 1 tab.

  11. Effects of hardness and test temperature on the stress-corrosion cracking susceptibility of carbon steel in simulated BWR environment; Koon koatsu sui kankyo ni okeru tansoko no oryoku fushokuware kanjusei ni oyobosu kodo, oyobi shiken ondo no eikyo hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Nakayama, G.; Akashi, M. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1998-03-15

    An SSRT test and a CBB test were carried out on carbon steel and heat treated materials applied with bead welding of single pass simulating fillet welding in oxygen-enriched high-temperature water environment, and the stress-corrosion cracking susceptibility was evaluated. Highly hard welding heat affected zones with Vickers hardness of more than 400 have grain boundary stress-corrosion cracking susceptibility. However, a structure whose high hardness has been realized by tempering treatment has no grain boundary stress-corrosion cracking susceptibility. In the SSRT test, stress-corrosion cracking fractured face rate rises with rising test temperature, resulting in stress-corrosion cracking susceptibility shown even at lower hardness. On the other hand in the CBB test, a large number of relatively shallow cracks are generated down to low hardness at temperatures below 190 degC, while the number of cracking occurrence decreases as the temperature rises. However, deep cracks increase. In the CBB test on tempered heat treatment materials, the fact that stress-corrosion cracking can occur in test pieces with Vickers hardness of 165, which is nearly the same as that for the base material, proves that no lower limit hardness exists practically in occurrence of stress-corrosion cracking in carbon steel. 13 refs., 12 figs., 2 tabs.

  12. Study of vortex dislocation in the wake of a flat plate with finite thickness; Yugen atsusa heiban koryu ni okeru uzu ten'i kozo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Abe, S.; Maekawa, H. [University of Electronic-Communication, Tokyo (Japan)

    2000-09-25

    Wake structures of a flat plate with finite thickness are studied using the rake of X-wires techniques. Parallel and oblique shedding modes in the wake flow are investigated. These modes depend on the flat plate end conditions. In the present paper, we demonstrate that manipulation of the end conditions yields a vortex dislocation that appears periodically at the same location. Vortex linkup dynamics phenomena in the dislocations are observed with smoke-wire flow visualization. Flow patterns of dislocation are analyzed by mean of the pseudo-flow visualization of the rake data. The linkup structure due to a misfit of two oblique shedding vortices appears periodically in the flow patterns. Evolutions of the power spectra of velocity fluctuations explain the generation of large-scale turbulent structure downstream due to the growth of a low-frequency mode and the cascade process of low/high frequency components. (author)

  13. Survey report in fiscal 2000 on the survey on how universities are contributing to promotion of IT industries in U.S.A.; 2000 nendo Beikoku ni okeru joho sangyo gijutsu shinko ni taisuru daigaku no koken jokyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In order to discuss the ways the Japanese universities should be in venture incubation and for IT industries, and taking measures thereon, surveys have been performed on the current status of the roles played by universities for the information industries in the U.S. as well as trends and measures taken therein. The problem that the U.S. universities are facing is that the superiority of learning in business schools has become more indistinct than in experiencing and learning the business in venture companies. As a result, the number of people who want to enter business schools is decreasing. Therefore, universities are executing audacious innovations including reorganization of the curriculums. Representative examples are the UCLA's entrepreneurship program combining the electric engineering department and the business school, and the Stamford University's marketing skill development course for engineers. An organizational activity is also being taken to mediate dialogues between business entities and actual investors with a university working as the center, such as the one in MIT Enterprise Forum. (NEDO)

  14. Quantum analysis in the transition process to excited state of an oxygen molecule induced by electron collisions; Denshi shototsu ni tomonau sanso bunshi ni okeru reiki jotai sen`i no ryoshironteki kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Ishimaru, K. [Gifu National College of Technology, Gifu (Japan); Okazaki, K. [Tokyo Inst. of Technology, Tokyo (Japan)

    1996-06-25

    For understanding of fundamental chemical reactions under a highly non equilibrium condition which is quite often used in plasma processing, the relevant atomic and molecular processes must be clarified. In this study, an analysis of the transition process to the excited state of an oxygen molecule induced by electron collisions in the oxygen plasma has been carried out. First, the electron density distribution in an oxygen molecule has been calculated using the extended Huckel molecular orbital method. Then, the electron potential energy distribution in the transition process to the excited state has been estimated. The electron behavior has been calculated using the estimated unidimensional electron potential energy distribution and unsteady quantum mechanics. As a result, the transition process to the excited state of an oxygen molecule induced by electron collisions and its conditions have been clarified qualitatively. 9 refs., 9 figs.

  15. Fiscal 1993 investigational study of a model of international cooperation for an environmentally harmony type green technosystem; 1993 nendo Oshu ni okeru haikibutsu shori oyobi recycle no doko ni kansuru chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    For the natural environment preservation, effective utilization of resources, and maintenance of the ecosystem, an international cooperation model was proposed for the environmental harmony type green technosystem. A comprehensive evaluating analysis of a green forest resource, etc. as the global resource, and an intensive extraction of subjects and needs was made. The analysis was conducted of technical possibility and abstract business development effects toward the industrialization with high values added which is in harmony with the environment. As a case study, the Papua New Guinea area, Malaysia was selected and re-evaluated. For this typical tropical forest area, a new technical system was studied based on the natural environment, industry/economy, social/cultural assessment, etc., and a model for industrializing new international cooperation was proposed. For the model making for industrialization, various steps to be taken and conditions to be prepared were studied and arranged for the realization. Upon going ahead with the international technical cooperation, Japan, a large lumber consuming country, needs to always consider the fostering and effective use of lumber resource in particular. 27 refs., 28 figs., 30 tabs.

  16. Study of a fuel injection quantity sensor in diesel engine. Part 3. Experimental evaluation of the improved type micro turbine sensor; Diesel kikan ni okeru nenryo funsharyo sensor no kenkyu. 3. Funsharyo keisoku no seido kojo ni kansuru jikken hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Maehara, H.; Iwasaki, T.; Kobayashi, T. [Zexel Corp., Tokyo (Japan)

    1997-10-01

    A Micro Turbine Sensor has been developed to measure fuel injection quantity and injection rate. Previous reports described results of experiments on the MTS which were carried out under steady and unsteady flow conditions. The MTS has been improved in shape of a holder tip and a detecting procedure for rotating speed of a turbine. As a result revolution speed of the turbine increased 18% over the conventional type holder under steady flow condition. Furthermore the measurement resolution of the MTS came up to about 2(mm{sup 3}/pulse) at 20(mm{sup 3}/stroke) under intermittent spray conditions using fuel injection pump. 11 refs., 11 figs., 1 tab.

  17. Study of solute incorporation into ice-layer on freeze concentration with ice-lining; Ice lining toketsu noshukuho ni okeru hyosho sochu eno yoshitsu torikomi ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Y.; Shinozaki, K. [Fujisawa Pharmaceutical Co. Ltd., Osaka (Japan); Hirata, Y. [Osaka University, Osaka (Japan)

    1997-07-10

    The mechanism of solute incorporation into an ice-layer in freeze concentration with ice-lining was studied by changing the impeller speed N and the difference between the brine temperature and the freezing point of the feed solution {Delta}T in 10 kg/m{sup 3} CCNa solution. The effect of N on the apparent partition coefficient of the solute K, is more serious than that of {Delta}T. The growth rate of the ice layer is 10{sup -7} - 10{sup -6}m/s under the condition of {Delta}T=2.8 - 7.9degC and N = 20-400 min{sup -1}. The growth rate had a little effect on solute incorporation into the ice-layer. K values depended on the surface condition of the ice layer, which is effected by the mixing speed of the impeller. The ice layer formed at low mixing speed has a complex rough shape, and has much solute because of adhesion to a large surface area. Therefore, it is recommended that freeze concentration is performed by making an ice layer with smooth surface at high mixing speed. 9 refs., 6 figs.

  18. Survey on actual status of R and D fund assistance in the U.S.A.; Beikoku ni okeru kenkyu kaihatsu shikin enjo no jittai nado ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-03-01

    As a basic survey to serve for establishment of science and technology policies, a survey was carried out on the actual status of R and D fund assistance in the U.S.A., roles of the government and civil sectors, and how they are interrelated. The survey was performed in detail on the following items: the assistance and cooperation measures taken by the U.S. government, and technological policies of the U.S. government; fund subsidies and policies toward technological research and development provided by the U.S. government; research and development plans and projects being the object of the subsidies given by the U.S. government; assistance and cooperation of private organizations for financing research and development activities in the U.S.A.; cooperation and joint works among industries, the government and universities (research consortiums) in the research and development activities; legal assistance policies for research and development in the U.S.A., the favorable tax system for research and development, the 1984 National Joint Research Act, and the actual status and analysis of the legal assistance policies in the U.S.A. for aiding research and development tests. (NEDO)

  19. Investigations and researches on CO2 balance in a high-temperature carbon dioxide separation technology; Nisanka tanso koon bunri gijutsu ni okeru CO2 balance ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    With an objective to select a promising process by comparing application environments and effectiveness of a high-temperature carbon dioxide separation, recovery and re-utilization technology with other methods, investigations were performed on reducible amount of carbon dioxide discharge by using material balance and system introduction. A large number of chemical and physical technologies are being developed for the separation and refining methods. This paper discusses the technologies for their application to iron and steel making, oil refining, and petrochemical industries, the so-called heavy and large product industries. As a possibility of utilizing the high-temperature separated CO2 in iron and steel making, an investigation was given on the direct iron ore smelting reduction process. It would be unreasonable to use CO2 in oil refining as a substitute to air to regenerate a catalytic decomposition and reformation catalyst because of decline in the catalytic activity. A discussion was given on a case to replace steam with CO2 in steam reformation and pyrolysis of hydrocarbons. The discussion requires the objective to be focused on such items as C/H ratio at a reformer outlet and relationship of balance in decomposition products. The C1 chemical and others were reviewed to search possibilities for their use as raw materials of chemicals used in chemical industries. Possibilities were discussed to fix high-temperature CO2 into peridotite and serpentine. 42 refs., 32 figs., 11 tabs.

  20. Evaluation of reduction in environmental burden and accumulation of impurities in material recycle system; Sozai recycle system ni okeru kankyo fuka sakugen to sozai no shitsuteki rekka no model ni motozuku hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Toi, A.; Sato, J. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1997-01-05

    Recycle of materials is expected to reduce the environmental burden caused by their production process. However, recycle may also lead to the accumulation of impurities and other effects which usually lower social utility of the use of materials. To evaluate these effects totally, we have constructed analytical models of recycle system and proposed formulas to estimate CO2 emission, impurity concentration, etc. in the recycle system. In this report, by using our models and formulas, we evaluated the influences of change in recovery ratio and life expectancy of steel products on the environmental burden as CO2 emission and the quality of materials as accumulation of Cu element. The result shows that change in each parameter has different influences and that appropriate combination of the parameters can lead to reduction in CO2 emission and improvement of material qualities simultaneously. 8 refs., 12 figs.

  1. Fiscal 1998 research report on the development trends of natural gas conversion technologies into liquefied fuel in Russia; 1998 nendo Roshia ni okeru tennen gas no ekitai nenryoka gijutsu no kaihatsu doko nado ni kansuru chosa kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Russia having natural gas resources largest in the world is actively promoting the basic research on liquefaction technology of natural gas such as Fischer-Tropsch (FT) synthetic catalyst, and its research potential is extremely high. This 3-year research project surveys the R and D trends of catalyst technology for liquefaction of natural gas, and fabricates the prototype FT synthetic catalyst based on the idea of Russian researchers to evaluate its feasibility experimentally. This report summarizes the following to clarify the research background: (1) The technology system for liquefaction of natural gas, and its future R and D trend, (2) The R and D trends of liquefaction technology of natural gas in the world, (3) The R and D trends of liquefaction technology of natural gas in Russia, (4) The research system of catalyses in Russia, (5) The activities of Russian catalysis research institutes, (6) The fuel liquefaction technologies of Russian major research institutes, and (7) The proposals from Russian research institutes. (NEDO)

  2. FY 1997 report of survey on the intellectual property in international collaboration research project; 1997 nendo chosa hokokusho (kokusai kyodo kenkyu ni okeru chiteki zaisanken ni tsuite no chosa hokokusho)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In promoting international collaboration research project, coordination of the patent system of each country which participants to the project belong to has broad implications in concluding the contract for the project. For example, in Japan, 100% of the patent belongs to the government for contrast or collaboration project with the government. While, in the USA, the patent developed by the private company belongs to the private company even for the contrast project. In Japan, the shared patent can not be transferred to the third party or implemented without agreement with the partner. While, in the USA, the shared patent can be transferred to the third party or implemented without agreement with the partner. Due to such a difference, some projects can not be established by ill coordination of intellectual property even when the meaning of the projects is well understood. In this survey, was investigated the outline of patent systems of major countries to study about what should well balanced treatment of intellectual property in international collaboration research project be in the future. 4 figs., 8 tabs.

  3. Experimental study on penetration of chloride ions into concrete and corrosion of reinforcing bars in various marine environments; Shuju no kaiyo kankyo joken ni okeru concrete no enbun shinto to tekkin fushoku ni kansuru jikkenteki kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Takeda, N.; Sogo, S. [Obayashigumi Research Inst., Tokyo (Japan)] Sakoda, S. [Tokai Univ., Tokyo (Japan)] Idemitsu, T. [Kyushu Inst. of Tech., Kitakyushu, Fukuoka (Japan)

    1998-08-20

    Moreover the various environmental conditions in the ocean, the conditions varies with a region, the construction position of the structures, a part and so on. Therefore, it makes difficult to grasp the effects of the difference of environmental conditions on the penetration rate of salinity and the advance of corrosion in reinforcing bars. In this study, exposure tests of concrete in marine environments were conducted over a period ten years to establish the rational design considered durability of concrete structures. In this tests, penetration of chloride ions, corrosion of reinforcing bar and quality change of concrete were investigated. As a result, chloride ion distribution can be predicted by using the chloride ion diffusion coefficient (Dc) and surface chloride ion density (Co) obtained from exposure tests. It was clarified that the rate of chloride ion penetration in marine environments is fastest in the splash zone, followed by submerged and atmospheric zones and so forth. 20 refs., 31 figs., 7 tabs.

  4. RESISTENCIA CHIMILA: NI ANIQUILADOS, NI VENCIDOS

    Directory of Open Access Journals (Sweden)

    Edgar Rey Sinning

    2009-08-01

    Full Text Available En este artículo se examina de forma sucinta la respuesta que los Chimilas dieron al proceso de usurpación de su territorio, mostrando cómo lograron resistir y lucharon por recuperar su espacio social, al tiempo que se señalan los efectos que tuvo sobre ellos el último proceso de ocupación territorial que, con fines capitalistas, el Estado colombiano y las economías privadas llevaron a cabo, pese al cual no fueron “ni aniquilados ni vencidos”. Finalizaremos este artículo señalando las características de las últimas fundaciones en territorio Chimila y su lucha por la supervivencia. Para su elaboración se reunió una variada información, a partir de diversos documentos históricos recolectados en archivos nacionales y regionales, diarios, cartas y crónicas de viajeros, además de las diversas reflexiones que han elaborado, antropólogos, sociólogos e historiadores sobre la temática.

  5. and ni(ii)

    African Journals Online (AJOL)

    userpc

    with nickel(II) and cobalt(II) chloride in 2:1 mole ratio yielded Ni(II) and Co(II) complexes respectively. The synthesized compounds were characterized based on melting point/decomposition temperature, solubility, molar conductance, magnetic susceptibility and infrared spectral analyses. The complexes have low molar ...

  6. SOVRAŽNI GOVOR

    OpenAIRE

    Ajtnik, Mojca

    2015-01-01

    Pojem sovražnega govora izhaja iz anglosaškega sveta in temelji na prepričanju o manjvrednosti nekaterih ljudi, zaradi njihove pripadnosti določeni skupini. Sovražni govor je eden ključnih trenutkov v vzbujanju sovraštva do določenih skupin ljudi. Takšen govor je neizogibno povezan s predsodki, diskriminacijo in stereotipi. Je stalni spremljevalec človeške družbe, vedno večja prisotnost sovražnega govora v današnji družbi pa je posledica potrošniško in kapitalistično naravnane družbe. Na pora...

  7. Ni landsbyer i Danmark

    DEFF Research Database (Denmark)

    Larsen, Jacob Norvig

    Denne rapport beskriver en evaluering af statsstøttede forsøg med at styrke og udvikle mindre lokalsamfund. Forsøgene er gennemført i ni kommuner. Da der i disse år er stor opmærksomhed om de små byers og samfunds udviklingsmuligheder, har erfaringerne fra forsøgsprojekterne bred interesse. Forsø...

  8. Submicron particles of Co, Ni and Co–Ni alloys

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 24; Issue 5 ... Magnetic Materials Volume 24 Issue 5 October 2001 pp 515-521 ... Magnetic sub-micron sized particles (with diameters in the range 100–600 nm) of Co, Ni and Co–Ni alloys, protected with polyvinylpyrrolidone have been prepared in gram quantities ...

  9. Niños investigadores

    Directory of Open Access Journals (Sweden)

    Manfred Liebel

    2007-12-01

    Full Text Available EN LA SOCIOLOGÍA INFANTIL, EL PRINCIPIO DE HACER PARTICIPAR A NIÑAS Y NIÑOS en los procesos de investigación está ampliamente reconocido. Tomando como punto de partida ese principio de participación, el presente aporte analiza la pregunta de en qué medida y de qué manera los niños mismos pueden actuar como investigadores. A fin de apreciar en lo justo la perspectiva de los niños, el presente trabajo aboga por que –con el debido acompañamiento de personas adultas– la investigación esté en manos de los niños. Por medio de varios ejemplos de países del Sur, se muestra cómo poner en práctica esta forma de investigación encabezada por niños. Tomando en cuenta la desigualdad en las relaciones entre niñas, niños y personas adultas, el trabajo hace referencia a problemas de ética y práctica investigativa que surgen en el proceso de investigación y también en el tema del uso de los resultados. Finalmente, se explican los beneficios que niñas y niños pueden obtener de sus propias investigaciones.

  10. Development of a domestic platn cultivation unit. Kateiyo saibai sochi no gaiyo

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, K. (The Tohoku Electric Power Co. Inc., Sendai (Japan))

    1993-06-15

    This paper describes development and operation evaluation on a domestic plant cultivating unit that can cultivate plants throughout a year by installing a prototype cultivating device effectively utilizing electric power, and controlling the cultivation environments. The prototype plant cultivating device uses trially an air cooling heat pump for general household use with high general-purpose applicability installed in a glass greenhouse with an area of about 10 m[sup 2], similar to those used by orchid lover club members. The device also uses commercially available humidifying and ventilating devices. No household horticultural facilities in cold district have ever used this kind of heat pump. Generally, cultivating environments in glass greenhouses are affected more easily by outside climate change as the greenhouse volume becomes smaller. For this reason, with this small-scale prototype cultivating device, orchids are cultivated to identify cultivating environments, and study technological development on controls over proper year-round cultivation and effective cultivation environments, as well as development and operation evaluation on household plant cultivation devices. 2 figs., 1 tab.

  11. Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (survey of the coal utilization in Pakistan); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Pakistan ni okeru sekitan riyo gaikyo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper made a literature survey, hearing survey, site survey/study on the coal in Pakistan such as the coal utilization system and the environmental situation, etc., and aimed at pre-examination for the survey of the introduction of the environmentally friendly type coal utilization system to be planned in Pakistan in the future. The examination, data collection and preparation were conducted in terms of the following items: the structure of coal consumption in energy supply, structure of coal consumption, mainly of domestic brown coal consumption, the situation of coal utilization by industry and by region, environmental problems caused by coal utilization such as air pollution, the trend of policies of environmental regulation, etc. The literature on the following was obtained and surveyed: the situation of economy/energy in Pakistan, coal utilization technology by industrial field, and environmental protection technology. The hearing survey was made to institutions concerned, corporation groups and men of learning and experience. Site surveys were conducted for the typically selected coal utilization equipment and existing environmental protection equipment. 66 figs., 56 tabs.

  12. Fiscal 1997 research report on the data collection, evaluation and analysis in the PV power generation field test project for public facilities; 1997 nendo kokyo shisetsu nado yo taiyoko hatsuden field test jigyo ni okeru shushu data hyoka kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    As a part of the field test project for diffusing PV power generation into public facilities generally, evaluation and analysis were made on the collected data from 105 sites installed during fiscal 1993-1996. Analysis of operation characteristics was made by using parameters obtained by developing a basic equation for every component. 94% of all the sites fell under the total solar irradiation of 3.0- 4.5kWh/m{sup 2}/D. 83% of those fell under the equivalent array operation time of 2.5-4.0h/D. 70% of those fell under the equivalent system operation time of 2.5-3.5h/D. 72% of those fell under the system operation time of 9.0-12.0h/D. 78% of those fell under the effective inverter efficiency of 0.84- 0.96. 68% of those fell under the inverter load factor of 0.25-0.35. 85% of those fell under the array performance ratio of 0.7-1.0. 83% of those fell under the system performance ratio of 0.6-0.9. The generation cost decreased from 270yen/kWh in 1993 to 100yen/kWh in 1996 because reduction of an installation cost largely contributed to reduction of the total cost. (NEDO)

  13. Fiscal 1999 basic survey report for promotion of joint implementation. Survey of diffusion of fluidized bed cement kilns in Vietnam; 1999 nendo Vietnam koku ni okeru ryudosho cement kiln fukyu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Possibility is assessed of energy saving and CO2 reduction through replacing shaft kilns with fluidized bed kilns at four cement plants in Vietnam. The effort will be associated with the clean development mechanism (CDM) ultimately. The fluidized bed kiln is one of the state-of-the-art technologies developed to meet social, economic, and technical demands involving global environments, enhancement of energy efficiency, effective use of resources, improvement in cost performance, increasingly diversified needs for cement, etc. Use of the technology will lead to an extensive reduction in greenhouse gas emissions, solution of the problem of dust flying from calcinating facilities, production of clinkers high in stability and quality, utilization of inexpensive fuels such as low-grade coal, and production cost reduced thanks to the new equipment occupying less installation space. The conclusion of the study is that the energy to be consumed by the four plants will decrease by 6101-9551 tons/year in terms of oil and that energy saving rate will be 37-44%. The decrease in fuel and electricity for calcinating furnaces in turn decreases CO2 emissions, with the amount of reduction estimated at 24,393-38,794 tons/year in terms of CO2 and the rate of reduction estimated at 36-44%. As for payout in case environmental special yen credit is granted, it will realize in the 10-12th year, which means such financing will achieve a sufficient investment effect. Effect is also tentatively calculated in case of fluidized bed kilns diffused across the country. (NEDO)

  14. 55th electric science promotion prize (progress prize). Demonstration of optical soliton transmission on OPGW first in the world; Dai 55 kai denki gakujutsu shinkosho (shinposho) jusho. Seiaihatsu no OPGW ni okeru hikari soriton denso no jissho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-10

    Electric science promotion prize (progress prize) is given to `Person who newly proposed a new concept, theory, material, device, system and method on electrical science and technology, or demonstrated these proposals` by the commendation committee of Institute of Electrical Engineers of Japan every year. Eight promotion prizes including that for Kansai Electric Power`s `Demonstration of optical soliton transmission on OPGW first in the world` were given. This research succeeded in development of the transmission/ receiving device suitable for optical soliton transmission, and the prediction method of an optimum transmission condition by computer simulation. In addition, this research succeeded in 10Gbit transmission of 784km and 40Gbit transmission (4-wave multiplex) of 392km by applying the above research result to Okurobe trunk line OPGW (98.2km). This demonstration of optical soliton transmission on OPGW is first in the world. (NEDO)

  15. Fiscal 1997 report on a feasibility survey of cooperation in relation to the joint implementation activities in Southeast Asian countries (6 nations); 1997 nendo chosa hokokusho (Tonan Asia chiikikoku (rokkakoku) ni okeru kyodo jisshi katsudo kanren no kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the COP3 Conference on Global Warming held in Kyoto in December 1997, the framework on greenhouse gases was agreed in discussions comprehensively made among Japan, the U.S. and the E.U. As a result, it is for 6 gases including CO2 and methane, and total emissions in developed countries are to be reduced 5% at least during 2008-2012 from the 1990 level. Target of each country is determined by gaps, and Japan`s reduction target is 6%. Therefore, to pass the numerical target agreed, it is necessary to take measures such as rationalization of the energy use by energy saving, etc. in the country and also measures such as promotion of the greenhouse gas emission control in developing countries. Accordingly, for the future development of NEDO`s AIJ project, a possibility of cooperation in the joint implementation was surveyed such as the state of greenhouse gas emissions of countries which are objects of GAP in Southeast Asian countries and neighboring countries, policies of the countries after the COP3 agreement, technological transfer for the emission control, etc. Countries for survey are Thailand, Indonesia, the Philippines, Malaysia, Vietnam and Myanmar. 21 figs., 15 tabs.

  16. Characteristics of H{sub 2}S Removal of Mixed-oxide Sorbents Containing Fe and Zn at High Temperatures; Tetsu {center_dot} aenkei sankabutsu datsuryuzai no kouonka ni okeru H{sub 2}S jokyo tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Shirai, Hiromi.; Kobayashi, Makoto.; Nunokawa, Makoto. [Central Research Institute of Electric power Industry, kanagwawa (Japan). Chemical Energy Engineering Department

    1998-11-20

    An integrated coal gasificatio molten carbonte fuel cells power generation system (IG-MCFC) has higher thermal efficiency than an integrated coal gasification combined cycle power generation system (IGCC). In IG-MCFC, it is necessary to remove sulfur compounds (H{sub 2}S, COS) so that there are less than 1 PPM. Iron oxide sorbents developed in IGCC can not achive this. New sorbents need to be developed for this reason. A zinc element has high ability for sulfur removal to less than 1 ppm. We prepared mixed oxide sorbents containing iron and zinc, and evaluated the characteristics of H{sub 2}S removal. 1. A zinc element, which was added to the sorbents as zinc ferrite (ZnFe{sub 2}O{sub 4}), had the highest reacitivity. 2. Silica to zinc ferrite had much effect on protecting of carbon depositions. 3. Zinc ferrite sorbets could remove H{sub 2}S down to less than 1 ppm. 4. Zinc ferrite sorbents after regeneration could also have less than 1 ppm. 5.The sorbents` desulfurization performance after regeneration was influenced by change of the specific surface area caused by regeneration. (author)

  17. Reduction of artificial source effect in the high-resolution aeromagnetic survey in the Hanshin region; Hanshin chiiki no komitsudo kuchu jiki tansa ni okeru jinko noise source no eikyo no jokyo

    Energy Technology Data Exchange (ETDEWEB)

    Nakatsuka, T.; Makino, M.; Morijiri, R.; Okuma, S. [Geological Survey of Japan, Tsukuba (Japan)

    1997-05-27

    A high-resolution aeromagnetic survey was carried out in December 1995 on areas from Kobe City to Kyoto City in relation to the Hyogoken-nanbu Earthquake in 1995. It was found in the survey that effects of electric trains driven by direct current and man-made structures cannot be avoided, working as a large noise factor in extraction and analysis of geological information. This paper describes a quantitative analysis on magnetic anomaly suspected to have been caused from artificial sources seen in the magnetic map of the Hanshin area obtained from the above exploration data. The paper also gives considerations on methods to remove the effects therefrom. It then describes a quantitative analysis and the result of attempts on removal of the anomaly, taking up the following factors: (1) distribution of specific and remarkable magnetic anomalies which correspond to railroad positions of the Hanshin Railways running through the Nishinomiya-Toyonaka area, (2) the magnetic anomaly trend in positive and negative pair seen in the seafront area of Kobe City, and (3) typical bipolar isolated type magnetic anomaly in the north-west part of Kobe City. The cause for (1) was loop current flown for the railway operation, that for (2) was man-made structures in the improved seafront area, and that for (3) was a provisionally built metal waste storage yard. 9 figs.

  18. 2D inversion results and interpretation of CSAMT data in the Itaya prospect, Northern Honshu, Japan; Tohoku nanbu chiiki Itaya chiku ni okeru CSAMT ho nijigen kaiseki kekka to sono kaishaku

    Energy Technology Data Exchange (ETDEWEB)

    Yoshioka, K.; Hishida, H.; Katayama, H. [Metal Mining Agency of Japan, Tokyo (Japan); Takakura, S. [Geological Survey of Japan, Tsukuba (Japan)

    1997-05-27

    A two-dimensional analysis was carried out on electric exploration data obtained by using the CSAMT method in the Itaya prospect in the southern part of the Tohoku region in Japan. Considerations were given on mine exploration targets. Gold produced in this area is contained in stockwork or vein deposited quartz in silicified hydrothermal breccia. Therefore, the exploration targets are silicified rocks that show high resistivity. The field investigation using the CSAMT method was conducted by installing a dipole source of about 1.9 km as a transmission source at a location about 6 km apart from the investigation area, and by measuring transmission currents from 8 to 10A and ten frequencies from 4 to 2048 Hz. The two-dimensional analysis was performed by using programs of a forward calculation that used a finite element method and of an inversion calculation that used a least-squares method. Analysis utilizing resistivity of the boring cores made minimizing RMS misfit possible. As a result, estimations were made on distribution of silicification and claying alteration from the detailed resistivity distribution around the Itaya mine. 5 ref., 8 figs.

  19. Three-dimensional modeling in the electromagnetic/magnetotelluric methods. Accuracy of various finite-element and finite difference methods; Denjiho MT ho ni okeru sanjigen modeling. Shushu no yugen yosoho to sabunho no seido

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Y. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-05-27

    To enhance the reliability of electromagnetic/magnetotelluric (MT) survey, calculation results of finite-element methods (FEMs) and finite difference methods (FDMs) were compared. Accuracy of individual methods and convergence of repitition solution were examined. As a result of the investigation, it was found that appropriate accuracy can be obtained from the edge FEM and FDM for the example of vertical magnetic dipole, and that the best accuracy can be obtained from the FDM among four methods for the example of MT survey. It was revealed that the ICBCG (incomplete Cholesky bi-conjugate gradient) method is an excellent method as a solution method of simultaneous equations from the viewpoint of accuracy and calculation time. For the joint FEM, solutions of SOR method converged for both the examples. It was concluded that the cause of error is not due to the error of numerical calculation, but due to the consideration without discontinuity of electric field. The conditions of coefficient matrix increased with decreasing the frequency, which resulted in the unstable numerical calculation. It would be required to incorporate the constraint in a certain form. 4 refs., 12 figs.

  20. Development of new varieties of melastomaceous flowers. Hybridization and affinity between plants of the melastomaceous genus; Shinhinshu kaki 'nobotan' no kaihatsu. 1. Nobotan zoku shokubutsu ni okeru kozatsu shinwasei

    Energy Technology Data Exchange (ETDEWEB)

    Onishi, S. [Kansai Electric Power Co. Inc., Osaka (Japan)

    1999-01-10

    Three varieties of creeping melastomaceous plants are developed at the environmental research center of Kansai Electric Power Co., Inc., which will blossom in the flower-scanty, hot and close summer season to cover bear land in parks. Efforts are made to cause interspecific crossing between melastomaceous plants, and to develop their hybrids. Involved in the hybridizing process are five kinds of the melastomaceous plants, namely, M. candidum, M. dodecandrum, M. normale, M. sanguineum, and M. tetramerum. Whether there is fruiting to follow fertilization is judged from the dehiscence to follow the thickening of the ovary, and seeds are collected before starting to drift away. Budding rates are surveyed for 10,000 seeds sown in various combinations. The budding rate is found to be the highest with the hybrid of M. candidum and M. tetramerum, which is 28.02%, and the lowest with the hybrid of M. normale and M. tetramerum, which is 0.07%. There are some combinations that exhibit fruiting but not budding. (NEDO)

  1. Internal friction and microplasticity of carbon-fiber-reinforced SiC ceramics; Tanso sen`i kyoka SiC ceramics no hakai zenku katei ni okeru naibu masatsu

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, H.; Nishino, Y.; Asano, S. [Nagoya Institute of Technology, Nagoya (Japan)

    1995-08-20

    Mechanical responses of carbon-fiber-reinforced SiC ceramics before fracture were measured in the strain range below 2 {times} 10{sup {minus}3} by two experimental methods: mechanical hysteresis and internal friction. Load-deflection curves were obtained by the three-point bending deformation in loading-unloading cycles. A little permanent strain was found after the first cycle even in the range where fracture never occurred. A closed hysteresis loop was observed after several cycles and stabilized with a symmetrical shape after more than twenty cycles. Such a stabilized hysteresis loop is attributed to the steady-state microplastic deformation and may cause the amplitude-dependent internal friction. Internal friction was measured in the fundamental mode of free-free resonant vibration as a function of strain amplitude. With increasing the amount of prestrain in the bending deformation, internal friction increased and became sensitive to the strain amplitude. The amplitude-dependent internal friction in the composites is considered to originate from fiber pull-out or microcrack propagation. The internal friction data were analyzed on the basis of the microplasticity theory and converted into the plastic strain expressed as a function of stress. Therefore, it becomes possible to non-destructively study the forerunning process of fracture of the fiber-reinforced ceramics. 23 refs., 6 figs.

  2. Fiscal 1996 survey report. Data collection and evaluation analysis in the project on field tests on the fuel cell generation; 1996 nendo kenkyu hokokusho. Nenryo denchi hatsuden field test jigyo ni okeru data shuyaku oyobi hyoka kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The paper installed fuel cell power generation equipment experimentally at various facilities which are the final diffusion form of the new energy power generation, conducted long-term operation under the actual load, collected/analyzed various data, arranged them as data useful for full scale introduction/diffusion, aiming at forming the base for general diffusion of the fuel cell power generation. The number of the systems installed for field test execution has been 24 places/28 units since the start of the project, and the system capacity totaled 4,250kW. The actual operation hours in five years are 6,000-28,000. In fiscal 1996, the average cumulative accumulated operational rate was approximately 68%, a little over that in fiscal 1995, 65%. The average load factor was 69% in fiscal 1995 and 70% in fiscal 1996. The utilization rate increased as a whole to about 57% on average if seeing only fiscal 1996, as compared with that in fiscal 1995, about 48%. The power generating efficiency was approximately 34% on average. As to the status of shutdown of the fuel cell power generation, the paper surveyed the average interval of failure, the rate of frequency of shutdown, the analysis of shutdown, etc. 250 figs., 29 tabs.

  3. Effect of impurities in fused magnesia on characteristics of MgO-C brick; MgO-C renga no tokusei ni okeru denyu maguneshia chu no fujunbutsu no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Maekawa, Akiyoshi; Geji, Makoto; Tanaka, Masato; Kitai, Tsuneo; Furukawa, Kunio [Harima Ceramics Corp., Hyogo (Japan)

    1999-05-01

    The effect of impurities in fused magnesia on magnesia-carbon brick was tested. For magnesia-C brick which used 3 kinds of magnesia of different impurities content of scaly graphite and aluminium under 0.25 mm in grain size, the change of magnesia mixed particle by heating and the relation between this change and bending strength were investigated. Periclase grain boundary impurities existing in magnesia mixed particle is softened, molten and further reduced in a temperature range over 900 degree C. Void is generated in grain boundary by this reduction, and inner peripheral part of mixed particle is densified. This change of mixed particle remarkably lowers hot bending strength and normal temperature bending strength strength after heat treatment. When measuring temperature increased, strength difference between bricks was widened, and absolute values of strength was in inverse proportion to the amount of impurities. (NEDO)

  4. FY 1998 basic survey to promote the joint execution, etc. Overall repair plan of thermal power plants in Maritime Province of Russia; 1998 nendo kyodo jisshi nado suishin kiso chosa. Roshia Enkaishu ni okeru karyoku hatsudensho sogo kaishu keikaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For thermal power plants in Maritime Province of Russia, a repair plan for effective reduction of emission of greenhouse effect gas was worked out as a draft plan for the joint execution. The project is to be implemented for the additional installation/replacement of boilers at Vladivostok No. 2 power plant, construction of a power plant as a substitute for Partizansk power plant, and new construction of Ussuriisk power plant. The draft plan includes the new installation of two gas-fired boilers/replacement of existing boilers at Vladivostok No. 2 power plant, construction of 200MW cogeneration facility at Partizansk power plant, construction of 180MW cogeneration facility at Ussuriisk power plant, abolition of small-sized boiler station, etc. The reduction amount of the greenhouse effect gas emission based on this repair plan totaled 338 million tons in project. The effect against cost is US$ 4.75 per 1 CO2 ton at Vladivostok. (NEDO)

  5. Influence of Pb content on the formation of Bi-2223 phase in the partial-melting and sintering process; (Bi, Pb)-2223 so no seisei ni okeru Pb no koka

    Energy Technology Data Exchange (ETDEWEB)

    Lu, X.; Nagata, A.; Sato, N.; Sugawara, K.; Kamada, S. [Akita University, Akita (Japan). Faculty of Engineering and Resource Science

    1999-11-10

    We understood that 2223 phases were easy to be formed in the composition that it is rich in composition element Bi, Ca, Cu and is scarce for Sr in order to form the much Bi2223 high temperature phase until now by a half melting and sintering process. Besides, in Bi{sub 1.6+b}PB{sub 0.4}Sr{sub 2+a}Cu{sub 3+c}O{sub y}, the optimum composition was proven to be Bi{sub 1.8}Pb{sub 0.4}Sr{sub 1.9}Ca{sub 2.1}Cu{sub 3.5}O{sub y}. By changing quantity of Bi and Pb this time, the effect of the Bi2223 phase on generation and organization was examined. (NEDO)

  6. Fiscal 1997 for the upgrading of the Asia/Pacific coal development. Survey of the optimization of the coal transportation system in Indonesia; 1997 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan yuso system saitekika chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summarized the results of Phase 1 and Phase 2 surveys conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In addition to the data collection and site surveys made in Phase 1, conducted in Phase 2 were determination of sites for harbors, determination of a scenario on coal transportation from coal mines to harbors, optimization of the coal transportation system, social/economic assessment, and proposal on the optimum transportation system. The results of the simulation were as follows: It is the most advantageous to transport coal from coal deposit area to harbor by rail and from harbor to Paiton by barge weighed over 10,000 tons. Tanjung Api Api is the most advantageous as harbor. The production scale which is profitable became more than 15 million tons. The present coal price of PTBA is $25/t arriving Suralaya. The coal in this case is said to be 5500kcal/kg in quality, and the coal of the same quality to this is only profitable. 8 refs., 68 figs., 104 tabs.

  7. Evaluation of the autonomic neuropathy function immediately after a change to upright posture using the impulse response function; Impulse oto kansu wo mochiita shisei henkan katoki ni okeru jiritsu shinkei kino hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Yokoyama, K. [Nagoya City University, Nagoya (Japan); Moyoshi, M.; Takata, K. [Daido Institute of Technology, Nagoya (Japan); Watanabe, Y. [Toyota College of Technology, Aichi (Japan)

    1997-05-20

    Autonomic neuropathy function immediately after a change to upright posture has been evaluated by applying transient response function of the system to the blood regulation system. The impulse response function was determined from the change in heart rate before postural change to the upright posture, and was compared with the transient change immediately after a change to the upright posture. The time series of R-R interval of electrocardiogram was used as the time series of the change in heart rate. To determine the impulse response function, an autoregressive model was applied to the R-R interval time series. The impulse response function at the steady state is a transient reaction at the impulse stimulation added to the blood regulation system. The R-R interval decreases rapidly by the autonomic neuropathy reaction in which the blood is rapidly transferred into the legs immediately after a change to upright posture. There is a close correlation between the initial temporary decrease in R-R interval and the impulse response function derived from the change in heart rate immediately after a change to the upright posture. Accordingly, the blood regulation and autonomic neuropathy functions can be evaluated by the impulse response function without actual standing test and load of tested persons. 9 refs., 3 figs., 1 tab.

  8. Heat pump using dual heat sources of air and water. Performance with heat sources arranged in parallel; Mizu kuki ryonetsugen heat pump no kenkyu. Netsugen heiretsu unten ni okeru seino

    Energy Technology Data Exchange (ETDEWEB)

    Ito, S.; Miura, N.; Sato, S. [Kanagawa Institute of Technology, Kanagawa (Japan); Uchikawa, Y.; Hamada, K. [Kubota Corp., Osaka (Japan)

    1996-10-27

    A heat pump system using water and air as heat sources was built and evaluated for its performance. In this system, evaporators may be operated singly or as connected in parallel or series, and, for each case, the quantity of heat acquired may be measured and system performance may be quantitatively evaluated. The findings follow. When the two heat sources are equal in temperature in the single-evaporator operation, the evaporation temperature is about 7{degree}C higher on the water side than on the air side, and the performance coefficient is about 0.7 higher. When the air heat source temperature is 25{degree}C in the parallel operation, like quantities of heat are obtained from both heat sources, and collection of heat from the water increases with a decrease in the air heat source temperature but, with an increase, collection from the air increases. When the air heat source temperature decreases, the evaporation temperature decreases in the single-evaporator working on the air and in the parallel operation but it levels off in the single-evaporator working on the water alone. When the water heat source temperature decreases, evaporation temperature drop is sharper in the single-evaporator working on the water than in the parallel operation, which suggests the transfer from the parallel operation to the single-evaporator working on the air. In the single-evaporator operation on the water heat source, the evaporation temperature linearly decreases with an increase in superheating. 1 ref., 10 figs.

  9. Study on solar chemical heat pump system. Basic experiment on falling film reaction for dehydrogenation of 2-propanol; Solar chemical heat pump no kenkyu. 2-propanol bunkai hanno ni okeru ryuka ekimakushiki hanno jikken

    Energy Technology Data Exchange (ETDEWEB)

    Doi, T.; Ando, Y.; Tanaka, T.; Takashima, T. [Electrochemical Laboratory, Tsukuba (Japan); Nomura, T.; Kamoshida, J. [Shibaura Institute of Technology, Tokyo (Japan)

    1996-10-27

    An experiment and the examination were carried out in order to elucidate the optimum conditions in the falling liquid film reaction method, in the conversion of solar energy using the decomposition reaction of 2-propanol. The device for the experiment was constituted of a reaction container, tubular pump, cooling pipe, sampling container for effluent from the upper and lower part of the reaction container, and gas burette. Examined in the experiment were various factors such as a fibrous activated carbon (catalyst support), ratio for carrying catalyst, catalytic composition and heating temperature. In the experiment, with the temperature inside the reaction container fully stabilized under prescribed conditions, measurement was done for the hydrogen generation by the gas burette for 10 minutes as well as for the sampling of effluent. The experiment revealed that the heat utilization ratio reached the maximum of about 27% when the heating temperature was 90{degree}C using a catalyst with the ratio of RU and Pt 1 to 1 and the ratio for carrying catalyst 10wt%, so that a great improvement was obtained in the heat utilization ratio at a low temperature. Also obtained was a large inversion ratio of about 15%. 4 refs., 6 figs., 5 tabs.

  10. Research report for fiscal 1998. Basic research for promoting joint implementation (rehabilitation of 300MW coal-fired thermoelectric power plants in China); 1998 nendo chosa hokokusho. Chugoku ni okeru 300MW sekitan karyoku hatsudensho rihabiri

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Studies are made on the feasibility of the above project which aims at energy efficiency improvement and CO2 reduction at thermoelectric power plants. Opinions and comments are collected by hearing, and on-site surveys are conducted at Shandong Province Zouxian Power Plant, Anhui Province Luohe Power Plant, and Henan Province Yaomeng Power Plant. The conclusion reached is outlined below. In view of the current and future demand for electricity in China and of the network to be constructed, it is believed that the rehabilitation is a pressing task for improvement on efficiency and reliability at 300MW coal-fired power plants. As for air pollution, NOx and dust in addition to greenhouse gas will be reduced under the project. There will be 3-4% improvement in boiler efficiency and approximately 4% improvement in turbine efficiency, and, in this connection, there will be CO2 emission reduction of 140,400-154,900 tons/year per unit in case of 300MW coal-fired power plants. As for cost efficiency, it is inferred that investment will achieve an adequate result, with the number of years required for investment retrieval taken into consideration. (NEDO)

  11. Biological treatment with mass balance analysis for two types of groundwaters contaminated by petroleum hydrocarbons and tetrachloroethylene; Sekiyukei tanka suiso oyobi tetrachloroethylene osen chikasui no seibutsu shori ni okeru busshitsu shushi

    Energy Technology Data Exchange (ETDEWEB)

    Kogure, K. [National Defense Academy, Kanagawa (Japan); Kuraishi, J.; Tsuchiya, Y. [Nishihara Environmental Sanitation Research Corp., Ltd., Tokyo (Japan)

    1997-07-01

    A depollution experiment with microbial decomposition was carried out on simulated groundwaters contaminated by a jet fuel (JP-4) composed of petroleum hydrocarbons as the main constituent and tetrachloroethylene (PCE). An aerobic batch reactor (SBR) was used for a purification experiment on the JP-4 contaminated groundwater. An anaerobic batch reactor (AnSBR) connected with the SBR in series was used for a purification experiment on the PCE contaminated groundwater. For microbe sources, the Formulation L-104 and sludge in a sludge digestion tank were used. The following conclusions were obtained as the result of the experiment: 98-99% of the total petroleum hydrocarbons existing in the simulated JP-4 contaminated water is decomposed by the biological treatment, and 0.06-1.3% thereof is discharged in the treated water; and in the depollution experiment on the PCE using the AnSBR reactor connected with the SBR in series, a PCE removal rate of 99.2% was obtained in a PEC load with 35.1{mu}mol per cycle in average. 6 refs., 8 figs., 3 tabs.

  12. Stress-induced transformation of retained austenite and residual stress in polishing and grinding of ADI. ADI no kenma kensaku kako ni okeru zanryu austenite no kako yuki hentai to zanryu oryoku

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, T.; Tada, S.; Abe, T. (Government Industrial Research Institute, Tohoku, Sendai (Japan)); Kurihana, S. (Fukushima Prefectural Office, Fukushima (Japan))

    1993-06-25

    In the present research, relation between the retained austenite ([gamma]) and residual stress (Sr) on the mechanically worked surface was investigated by an X-ray diffraction to furthermore reform the ADI (Austempered Ductile Iron) which is high toughness automobile part material. As samples, selected were two types of ductile iron which are equivalent to FCD450 and FCD600, respectively. In the main process of thermal treatment, they are austenitized in argon at 1173K in the furnace, held quickly cooled (to between 573 and 648K) a cooled at room temperatures. After the treatment, both of them have no structural differences. As a result of investigating the relation of [gamma]'s stress-induced transformation on the polished and ground surface to both Sr and carbon concentration, the vol% of [gamma] on the worked surface by silicon carbide waterproof abrasive paper and buff is small on the surface where the Sr is high, and both of them are mutually correlative. The [gamma] is so quasi-stable as to be martensitized, if worked, and degraded in mechanical properties. The low carbon ductile iron (less than 1.4% in carbon content) is easy to transform, while the high carbon ductile iron (more than 1.6% in carbon content) is difficult to transform and its [gamma] is stable for the working. 16 refs., 8 figs., 2 tabs.

  13. Filament coupling in rapid-quenched and transformed jelly-roll Nb{sub 3}Al multifilamentary conductors; Kyunetsu kyurei{center_dot}hentai ho jieriroru Nb{sub 3}Al tashin senzai ni okeru fuiramento ketsugo

    Energy Technology Data Exchange (ETDEWEB)

    Banno, N.; Takeuchi, T.; Ito, K.; Wada, H. [National Research Institute for Metals, Tokyo (Japan); Japan Science and Technology Corporation, Saitama (Japan); Kosuge, M. [National Research Institute for Metals, Tokyo (Japan); Tagawa, K. [Japan Science and Technology Corporation, Saitama (Japan); Nakagawa, K. [Hitachi Cable Ltd., Tokyo (Japan)

    2000-05-29

    In Nb{sub 3}Al wire described in the above title, filaments are adjacent to each other and bridging between filaments and proximity effect are worried about. In three kinds of wires with different diameter, A15 phase was formed via supersaturated solid solution by heat treatment of rapid heating/quenching and transformation. By measuring magnetization characteristics, hysteresis loss and critical current density, the equivalent filament diameter was determined. As the result, it was found that hysteresis tends to become less with larger diameter of filament at higher temperature. Also, from magnetic field dependence of equivalent filament diameter, the possibility that bridging occurred in the sample with shortest distance between filaments and the proximity effect occurred in longer distance between filaments was shown. (NEDO)

  14. Application and availability of stable isotopes on water research. Isotopic analysis of aquatic ecosystem structure; Mizu kankyo kenkyu ni okeru antei doitai no riyo to yukosei. Antei doitai hi niyoru suiken seitaikei kozo no kaimei

    Energy Technology Data Exchange (ETDEWEB)

    Minagawa, M. [Hokkaido Univ., Sapporo (Japan). Graduate School

    1997-05-10

    In case that our object of investigation does not lie in analysis of biological species and lies in clarification of substance circulation through the medium of organisms, the stable isotopic ratios {delta} of bioelements ({sup 13}C/{sup 12}C, {sup 15}N/{sup 14}N) distributing naturally are effective as approach. According to the food chain, heavy isotopes concentrating into animal tissues at a fixed rate, this phenomenon is brought about by the fact that there are many lighter isotopes in the matters exhausted from animal bodies. It is known that urine and ammonia exhausted from animal are lighter than somatic cells at {delta}{sup 15}N from about -8 to -2 (0/00). In result, somatic cells of animals coming to be more dense than feed by about 3 at {delta}{sup 15}N and about 1.5 at {delta}{sup 13}C, this concentration is called ``isotopic ratio effect in feeding`` and is held constant regardless of kind of animal, environment, age and difference of nitrogen metabolism system. An isotopic ratio {delta}{sub s} of an animal fed two kinds of feeds in the ratio f{sub 1} : f{sub 2} (= 1-f{sub 1}) is given by the following equation: {delta}{sub s} = f{sub 1}{delta}{sub 1} + (1-f{sub 1}){delta}{sub 2}. 6 refs., 7 figs.

  15. Experiment for deep seismic reflections in Hidaka, Hokkaido. Comparison between Vibroseis and explosive data; Hidaka chiiki ni okeru shinbu hanno data no shutoku jikken. Vibroseis to dynamite no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, N.; Ikawa, T. [Japex Jeoscience Institute, Tokyo (Japan); Ito, T.; Tsumura, N.; Shinohara, M.; Ikawa, T. Ikawa, H.; Asano, Y.; Tanaka, Y.; Miyazono, N. [Chiba University, Chiba (Japan); Arita, K.; Moriya, T.; Otsuka, K.; Omura, T. [Hokkaido University, Sapporo (Japan); Kimura, M. [Osaka Prefectural University, Osaka (Japan); Hirata, N. [The University of Tokyo, Tokyo (Japan); Okuike, S.

    1997-05-27

    This is a prompt report. These days the importance of acquiring knowledge about the structure from the lower crust down to the upper mantle is often discussed with reference taken to Hyogo-ken Nanbu Earthquake. The Hidaka collision belt where the lower crust is exposed on the surface is a rare phenomenon in the world and has been the subject of seismic survey. As a part of the survey, experiments are conducted by the use of vibrations produced by Vibroseis and dynamite sources. Every one of the shot records (20-second record) from the two types of vibration sources contains a clear echo in the vicinity of 16 seconds supposedly from a level deeper than 40 kilometers, not to mention reflections from shallow levels. Although some studies have to be conducted before the reflecting geological boundary (possibly the upper mantle) of the echo near the 16-second point can be identified, yet this is probably the reflection from the deepest level ever obtained in the seismic reflection survey conducted in Japan`s land area. It is proved by this experiment that vibration from a vibrator can reach as far as that from explosion if the vibrator specifications are rightly chosen. 4 refs., 3 figs.

  16. Numerical model for gas-liquid two-phase mixture flow in a vertical pipe with a sudden enlargement in diameter; Kankei ga kyukakudai suru enchokukannai ni okeru kieki nisoryu no suchi model

    Energy Technology Data Exchange (ETDEWEB)

    Hatta, N.; Fujimoto, H.; Takuda, H.; Omodaka, M.; Takatsu, T. [Kyoto Univ. (Japan)

    1998-07-25

    Airlift pumps are utilized to transport toxic and hazardous solutions in chemical industries and so on, and they are prospected to use for lifting deep seabed mineral resources. Therefore, recently, it is carried out actively to investigate to grasp the fluidity of airlift pumps. This paper is concerned with a numerical model for the steady-state flow characteristics of the gas-liquid two-phase mixture flowing upward in a vertical pipeline with an abrupt enlargement in cross sectional area. The system of governing equations used is based upon the multifluid model and the transitions of gas flow pattern are taken into consideration in the system of governing equations. For the case of an abrupt enlargement in diameter in a coaxial pipeline, the procedure of the numerical calculation to obtain the flow characteristics in the pipeline section after a sudden change in diameter has been proposed. At the same time, the experiments have also been performed using two kinds of lifting pipes in order to confirm the validity of the present numerical model. As a result of the comparison of the calculated results with the experimental data, it was confirmed the applicability of the system of governing equations as well as the validity of the procedure of the numerical calculation proposed here. 23 refs., 6 figs., 1 tab.

  17. Compression characteristics of refrigerant-oil mixture in refrigerant compressors. 1st Report. Modeling of leakage and heat transfer; Reigai asshukuki ni okeru reibai-abura kongobutsu no asshuku tokusei. 1. More to dennetsu no model ka

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, M.; Yanagisawa, T.; Shimizu, T.; Shikata, T. [University of Shizuoka, Shizuoka (Japan). Faculty of Engineering

    1995-02-25

    Refrigeration oil is used for lubrication, sealing and cooling in refrigerant compressors, and mixing of the oil with refrigerant has great influences on compression characteristics in the compressors. In the past there were some studies in which the effect of the oil on the compressor performance was analyzed theoretically, but most of them did not discuss well the propriety of the oil treatment in the analysis. In this study, we developed the mathematical compressor model including the effect of the oil on leakage, heat transfer and flow resistance in vane compressors and examined the influence of the ways of treating the oil on the calculated results. When the model employed a quality of two-phase leakage flow equal to that in the compression chamber and a coefficient of heat transfer reflecting thermophysical properties of the oil and the refrigerant, it showed better agreement with experimental results. 18 refs., 9 figs., 1 tab.

  18. Time series analysis of the CO sub 2 exchange rate in the one-year-old leaves of laelia anceps lindl. Laelia anceps lindl no ichinen shiyo ni okeru CO sub 2 kokan sokudo no jikeiretsu kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Dogane, Yuji; Ando, Toshio (Chiba Univ., Chiba, (Japan). Faculty of Horticulture)

    1990-01-31

    Concerning the carbon-fixing patterns in the dark reaction of plant photosynthesis, it has been known that there are 3 kinds, namely C {sub 3}, C {sub 4}, and CAM types, most of green plants fix CO {sub 2} by their C {sub 3} circuits and those with {C sub 4} and CAM circuits are rather small in number. However, CAM plants can switch from the CAM type to the C {sub 3} type or vice versa depending upon the external as well as internal factors and have capability of changing the balance between the two circuits, often making analysis of quantitative and qualitative changes of photosynthesis difficult, hence the analysis of photosynthesis rate of CAM plants dealt with in the studies which have so far been made has been limited to a quantitative grasp. This study used Laelia anceps Lindl. as sample material, classified several conditions whose photosynthesis rates differ recognizably and succeeded to analyze qualitative differences of these conditions by the mathematical measure. For analyzing photosynthesis rates, the time series analysis was newly adopted. 11 refs., 4 figs., 1 tab.

  19. Stratigraphy and eruption ages of deposits at the southeast side of Nishiyama volcano, Hachijo island during the last 2,500 years; Hachijojima, Nishiyama kazan nantoroku ni okeru saikin 2,500 nenkan no funshutsubutsu no sojo to funka nendai

    Energy Technology Data Exchange (ETDEWEB)

    Sugihara, S.; Shimada, S. [Meiji University, Tokyo (Japan)

    1998-10-25

    The Nishiyama volcano of the Hachijo island is a stratovolcano whose volcanic activity started approximately 10,000 years ago. Among the lateral volcanos surrounding the cone-shaped mountain, there is a Kandoyama tuff cone formed by a phreatomagmatic eruption at the southeastern base of the Nishiyama volcano. It is known that Kandoyama`s latest eruption is not older than 4,000 years. In this report, the stratigraphy of eruptive deposits and the types of eruptions involving Nishiyama after Kandoyama formation are clarified. Also, the history of Nishiyama` eruption is discussed, for which a study is made about the stratigraphic relationship between its eruption and the results of {sup 14}C dating or the eruption remainders, corresponding terrestrial episodes recorded in ancient literature usable for eruption dating, etc. The conclusion is summarized below. The eruptive deposits are to be supposedly dated at a period after the completion of caldera aggradation. At the southeastern base of Nishiyama, the eruption of 1605 is to immediately follow the eruption of approximately 1,100 years ago, and no eruption so active as to cause the outflow of lava is noticed therebetween. It is inferred that the Nishiyama volcano erupts once in a period of 300-700 years. 44 refs., 11 figs., 2 tabs.

  20. Report on the investigative study for enregy-saving measure in hydraulic/pneumatic system in 1990 fiscal year; 1990 nendo yukuatsu system ni okeru sho energy taisaku no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    In hydraulic systems, material problems were investigated in addition to the problem of providing microelectronic instruments and that of working fluids. In pneumatic systems, air leakage and sealing were investigated in response to the resource-saving problem and high-pressurization for miniaturization of systems. The demonstration tests of hydraulic/pneumatic cylinders showed that the piston rod surface-treated by 20um hard chromium plating is more stable than that treated by other methods. There, however, remains the possibility of using SQP even now in hydraulic cylinders in which lubrication is assured. Stabilization of hardness and finishing precision in the SQP treatment of pneumatic cylinders must still be investigated. Concerning the quality of packings for hydraulic systems which use lubricating oil, urethane and other materials are not much different from each other in oil-resistant and wear-resistant properties. Superiority of urethane and XNBR was not apparently shown for non-lubricative pneumatic use. Totalized cost estimation in relation to durability must be regarded as important over the whole field of material, processing, transportation and use. 36 figs., 29 tabs.

  1. Behavior of ethyl linoleate in batch rectification of aqueous ethanol solution containing linoleic acid; Rinoru san wo fukumu etanoru suiyoeki no kaibun jyoryu ni okeru rinoru san echiru no ryoshutsu kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Kashiwada, Masanori; Kawano, Yoshinobu; Shiomori, Koichiro [Miyazai University, Miyazaki (Japan). Department of Materials Science; Aiko, Ryoko; Uemura, Yoshimitsu; Hatate, Yasuo [Kagoshima University, Kagoshima (Japan). Department of Applied Chemistry and Chemical Engineering

    1999-03-10

    In shochu mash containing citric acid, fatty acids react with ethyl alcohol to form their esters having high volatility, and the taste and smell of shochu are influenced by these esters. Ester formation rates between ethanol and linoleic acid were measured at various temperatures. The formation rates are affected by the concentrations of linoleic acid, citric acid as catalyst, and ethanol, and by the reaction temperature. The rate equation of esterification of the linoleic acid is formulated as a function of the concentrations of linoleic acids (C{sub L}), citric acid (C{sub C}) and ethyl alcohol (C{sub E}) as follows. r=k{sub L} C{sub L}{sup l} C{sub C}{sup m} C{sub E}{sup n} The exponents l, m and n were determined. Furthermore, the rate constant (K{sub L}) was estimated as a function of temperature. The distillation behavior of aqueous ethanol solution containing linoleic acid is measured. No linoleic acid is detected in the distillation effluent. The distillation behavior of ethyl linoleate is interpreted based on the esterification of linoleic acid by ethyl alcohol in the distillation still and the equilibrium of ethyl linoleate in aqueous ethanol solution. (author)

  2. Distillation behavior of ethyl linoleate in the batch distillation of ethanol water liquid including linoleic acid; Rinorusan wo fukumu etanoru suiyoeki no kaibun joryu ni okeru rinorusan echiru no ryushutsu kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Kashiwada, Masanori; Kono, Shigenobu; Shiomori, Koichiro; Aiko, Ryoko; Uemura, Yoshizo; Hatade, Yasuo

    1999-06-05

    It changes in the ester which the volatility is higher by various fatty acids which are included for the shochu mash reacting with the ethanol under the citric acid existence in the distillation within the year, and it is based on quality of liquor as a distillation product in respect of the effect. In this study, esterification reaction rate between ethanol in model aqueous solution of the shochu mash and linoleic acid was measured. These reaction rate receive the effect of concentration of linoleic acid, citric acid concentration as a catalyst, ethanol concentration and temperature. It was proven that esterification rate equation of linoleic acid was shown by the following equation as concentration C{sub L} of linoleic acid, concentration C{sub c} of citric acid, ethanol concentration C{sub E} and function of the temperature. r=k{sub L}xC{sub L}{sup l}xC{sub c}{sup m}xC{sub E}{sup n}. Velocity constant k{sub L} was required as a function of the temperature, while the value of linoleic acid concentration citric acid concentration which affects the generation rate of ethyl linoleate and order of reaction l, m of the ethanol concentration and n was obtained. In addition, it distilled the ethanol aqueous solution including linoleic acid or this ester, and ester generation by the esterification reaction in the can and the distillation behavior were examined. It was proven that distillation behavior of ethyl linoleate could estimate from the vapor-liquid equilibrium of ethyl linoleate in the. Distillation can of esterification reaction rate and in ethanol aqueous solution. (translated by NEDO)

  3. Behavior of Minute Amount of Crotonaldehyde in Batch Rectification of 1-Butanol+Ethanol and Isoamyl alcohol+Ethanol; 1-butanoru + etanoru oyobi isoamiruarukoru + etanoru kei no kaibunseiryu ni okeru biryo no kurotonarudehido no kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Tan, K.; Hatate, Y.; Aiko, R. [Kagoshima Univ. (Japan). Faculty of Engineering

    1997-07-10

    Vapor-liquid equilibria of 1-butanol+ethanol and isoamyl alcohol+ethanol systems containing a minute amount of crotonaldehyde were measured at atmospheric pressure using an Othmer-type still. Equilibrium ratio curves of the trace component (crotonaldehyde) are shown to exhibit a characteristic shape. Batch rectification experiments of ethanol, 1-butanol, 1-butanol+ehanol and isoamyl alcohol+ethanol systems containing 0.1 wt% crotonaldehyde were carried out using a glass Oldershow-type column. The lowering of the concentration of the trace component in distillate becomes gentle with the progress of distillation. The distillation curves of the trace component are found to show a peak at the change of distillate of the major components. In the residue of batch rectification of 1-butanol and isoamyl alcohol solutions, crotonaldehyde was detected in much higher concentration than in the last distillate. 5 refs., 8 figs., 1 tab.

  4. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  5. FY 1998 evaluation/analysis of the data collected in the field test project for photovoltaic power generation for public facilities; 1998 nendo kokyo shisetsu nadoyo taiyoko hatsuden field test jigyo ni okeru shushu data hyoka kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    In the field test project for the photovoltaic power generation for public facilities, operational data were collected/analyzed on facilities at 158 sites installed from FY 1994 to FY 1997. As a result, the following were found out: Average values of the global radiation on an inclined surface, equivalent array operation time, equivalent system operation time, system operation time, inverter performance efficiency, inverter load factor, array power coefficient, and system power coefficient are 3.51 kWh/m{sup 2}/D, 2.72 h/D, 2.47 h/D, 10.3 h/D, 0.91, 0.30, 0.77 and 0.70, respectively. No deterioration with age was recognized in the 4-year operation data. As to the maintenance, the item, 'there are a lot of failures in the photovoltaic power system,' was 2% in rate. As to the inspection, times are mostly once a month. The annual maintenance cost was widely between about 360 yen/kW and about 30,000 yen/kW. Supposing annual expenses to be a total of capital expense, direct expense, and general administrative expense, the power generation cost dropped from approximately 240 yen/kWh in FY 1994 to 100 yen/kWh in FY 1997. (NEDO)

  6. Fiscal 1997 report on the feasibility survey of Japan`s cooperation into energy/environment related fields in Asian countries; 1997 nendo chosa hokokusho (Asia shokoku ni okeru energy kankyo kanren bun`ya eno kyoryoku kanosei chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A survey was made to study possibilities of Japan`s cooperation in tackling energy/environment problems in Asian countries. In 1995 the GNP growth rate was 2.6% in the world, while it was 7.9% in Asia showing a rapid growth. With the accelerating industrialization and urbanization, energy demand is now over three times as much as that in the 1980s. This means increases in waste and environmental pollution. Especially, the use of firewood in non-electrified areas is a serious problem the same as the slash-and-burn farming and deforestation. Also relating to the production of electric power, it is inevitable to choose hydroelectric power and renewable energy in addition to fossil fuels. Therefore, the necessity is heightening of various technologies for it and environmental protection technologies such as coal cleaning. Local areas, where the population density is extremely low and the electrification cost is high, became victims of elecrification. There the power system should be shifted from the central supply system to the local distributed one. For it, it is necessary to recognize an importance of the distributed type renewable energy which is friendly to the environment. The paper outlined the state of each country and energy by policy and environment. 10 figs., 83 tabs.

  7. Report on a wind power development field test project (detailed wind condition investigation) in the city of Choshi; Choshishi ni okeru furyoku kaihatsu field test jigyo (fukyo seisa) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    This paper describes observation on the annual wind condition at the Yokka-ichibadai in the city of Choshi. The average wind velocities were 4.7 and 3.8 m/s at the ground height of 20 and 10 meters, respectively, not having reached the NEDO's criterion values 5.6 and 5.0 m/s. The annual wind direction emergence rate on the wind axis was 70%, meeting the criterion value of 60% or higher, and the wind direction is stable. The exponent for the vertical wind velocity distribution was 3.3, which is similar to that in the urban area. Disturbance in the wind condition was 0.18, meeting the criterion value of 0.30 or lower. The maximum momentary wind velocity was 31.9 m/s, which is well below the criterion of 60 m/s presenting no problem as a wind mill construction site. The wind energy density was 94 W/m{sup 2}, being only 63% of the criterion value, when all the azimuths were used as the object. The result of the investigation is that the average wind velocity is low and the wind energy density is also low. However, if the size of wind mill to be introduced is set to the class B (300 kW), it is possible to attain an annual operation rate of 58%, an annual energy acquisition amount of 515 MWh, and a facility utilization rate of 19.6%. If set to the class C (750 kW), an operation rate of 78%, an annual energy acquisition of 1296 MWh, and a facility utilization rate of 19.7% can be obtained, meeting the criterion value. (NEDO)

  8. Insulation recovery characteristics after arc interruption and its application for high speed reclosing of UHV A. C transmission lines. UHV koryu sodensen ni okeru arc shokogo no zetsuen kaifuku tokusei to kosokudo saihero hoshiki eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Goda, Yutaka; Matsuda, Shoji; Inaba, Tsuginori.

    1988-11-01

    An application of high speed reclosing for UHV a.c transmission lines is expected to secure high reliability of transmission system. In order to choose dead times of high speed reclosing property, it is necessary to clarify forced extinction characteristics of secondary arc and insulation recovery characteristics after arc interruption. The authors carried out many tests about these. This reports shows summarization of the results of these test. The authors applied a statistical method to measure insulation recovery characteristics after arc interruption, and calculated some dead times under some assumption. From the results of the tests, the authors considered that the technique of high speed grounding switch is effective for realizing high speed reclosing. They showed the results of calculation to choose dead times of high speed reclosing. 21 refs., 35 figs., 10 tabs.

  9. Progress of electrical and electronic engineering in the last 10 years. 6. Progress in the field of industry applications; Denki denshi gijutsu 10nen no ayumi-6. Sangyo oyo bun`ya ni okeru ayumi

    Energy Technology Data Exchange (ETDEWEB)

    Nakazato, T.

    1998-06-01

    Power electronics technology conducting conversion and control of electric power by means of electronic means by using the power semiconductor device, developed extremely by development of the power transistor and GTO (Gate Turn-off Thyristor). In the demand, the spread of inverter is miracle, centering the motor control, uninterruptible power supply (USP) and so on, it is used in many fields such as manufacturing industry, chemical industry, OA (Office Automation) system, and so forth. The history of realization in the rotary machines reaches about 110 years. The development of recent technique containing driving technique is miracle. There is a variable speed pumped-storage power system developed and realized by Japan faster than in the world. In the field of the railway, speed-up in the Shinkansen line and the ordinary railway line, power saving, cost reduction, improved convenience, and so forth were intended. In the field of the road traffic, car navigation brought an extreme spread as well as cost reduction. For a typical example of control technique in industry, there is a technique of motion control. This is a field possible for Japan to show a priority from its original, such as robot control. 6 figs., 1 tab.

  10. Fiscal 1994 survey of the base arrangement promotion for foreign coal import. Investigation on the trend of coal demand in Central and South American countries; 1994 nendo kaigaitan kiban seibi sokushin chosa. Chunanbei shokoku ni okeru sekitan jukyu doko chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    Focusing on the present status and future of coal demand in Central/South American countries and the coal trade between Central/South American countries and the U.S., the paper described the present status and future of coal demand there and the effects on Japan. Export of Colombian coal will amount to approximately 30-35 million tons in 2000. Venezuelan coal 10-20 million tons. The U.S. imported good-quality general coal low in sulfur content, 3.08 tons from Columbia and 1.39 tons from Venezuela. Coal export from the U.S. to Central/South America was mostly of raw material coal, 5 million tons in 1993 and 5.39 million tons in 1994. General coal was 180,000 tons. The U.S. has no plans of increasing US coal export to Central/South America. But it is safely predicted that Columbia and Venezuela will increase coal export to Europe in the future. It will bring about decrease in export of US coal to Europe, which connects with increasing pressure for the coal trade amount of Japan. 21 figs., 47 tabs.

  11. Range of wavelengths possible to estimate phase velocities of surface waves in microtremors; Bido tansaho ni okeru suitei kanona bidochu no hyomenha iso sokudo no hacho han`i

    Energy Technology Data Exchange (ETDEWEB)

    Miyakoshi, K.; Okada, H.; Ling, S. [Hokkaido University, Sapporo (Japan)

    1996-05-01

    To specify the maximum wavelength of the phase velocities that can be estimated by the spatial autocorrelation (SPAC) method or F-K method in microtremor exploration, investigations were conducted using numerical simulation. In view of feasibility, an equilateral triangle array was employed, the maximum radius of the array having 7 observation points being 0.10km. The dispersion curve of the Rayleigh wave basic mode was calculated from an underground structure model. White noise was used as the incident wave, and, in case the waves came in from multiple directions, a different phase spectrum was assigned to each direction. In searching for the maximum wave length of phase velocities that could be estimated, a limit was imposed upon estimation, and it was prescribed that the wavelength be the limit if the difference between the theoretical value and estimated phase velocity was 5% or higher. As the result, it was found that it is possible to estimate the phase velocity when the wavelength is up to approximately 10 times longer than the array maximum radius in the SPAC method, and up to approximately 5 times longer in case of the F-K method. 10 refs., 5 figs., 1 tab.

  12. Research report for fiscal 1998 on the basic research on the promotion of joint implementation and so forth. Coalbed methane collection and utilization project in China; 1998 nendo Chugoku ni okeru tanko methane gas kaishu riyo project chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    China is surveyed for promotion of joint implementation, which is one of the flexibility measures in the Kyoto Protocol, the Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change. The project aims to collect methane for global warming suppression and to use it as town gas and for power generation as well. The survey covers the 2 coalfields of Yangquan and Panjiang. The Yangquan coalfield is the largest anthracite yielding base in China, with 6 mines in operation. Power generation centering on a 100MW plant is discussed, and generation fired by a mixture of debris out of the coal preparation facility and gas is compared with another fired by town gas, on the assumption that 130-million m{sup 3} is available under the current circumstances. In the case of the Panjiang coalfield, which is expected to develop into a large coal base in the southern part of China, power generation centering on a 50MW plant fired by a mixture of debris and gas is discussed, on the assumption that 63-million m{sup 3} is collectable from the existing 5 mines. Use of town gas is also studied. When Japan's coalbed methane collection technology is applied, the gas drainage rate will be elevated to 40-35% or higher. It is desired that the use of gas drainage will be further diffused for the prevention of disasters of coal mine gas explosion. It is hoped that the use of environmentally friendly energies will be enhanced. (NEDO)

  13. Enzyme synthesis of kyotorphin precursor in the organic solvent using the surfactant covering enzyme; Kaimen kasseizai hibuku koso wo mochiita yuki yobaichu ni okeru gyotoru fuin zenkutai no koso gosei

    Energy Technology Data Exchange (ETDEWEB)

    Murakami, Yoshihiko; Kawakida, Hidetaka; Hirata, Akira [Waseda University, Tokyo (Japan)

    1999-04-05

    Using surfactant covering enzyme which manifested high activity in the organic solvent, new peptide synthesis technique which separates the product synthesized by enzyme reaction in organic solvent to the water phase in the extraction was proposed. It had anion radical and cationic unit in the molecular structure, and enzyme synthesis reaction of the analgesia peptide kyotorphin (TyrArg) precursor of which the hydrophilicity was a resistant material was taken up, and Z-TyrArgOEt synthesized in the organic solvent phase was selectively separated to the tank in the extraction, and the yield which is higher than the water single phase system a little was achieved. (translated by NEDO)

  14. Future coal demand and supply in the Asia-Pacific region and environmental measures. JAPAC Coal Flow Meeting 1994. Asia Taiheiyo chiiki ni okeru sekitan jukyu no shorai to kankyo taisaku. JAPAC coal furo '94 meeting kaisai

    Energy Technology Data Exchange (ETDEWEB)

    Honda, H. (The Institute of Energy Economics, Tokyo (Japan))

    1994-06-01

    This article reports the panel session of the coal demand and supply, the welcome reception, and the inspection of Hekinan Power Station of Chubu Electric Power Co. in the SPEC (Symposium on Pacific Energy Cooperation). Mr. Ando of NEDO, Japan, presented the trend of coal demand and supply and the response from the viewpoint of effective utilization of coal. He described the expanding coal demand, hurdles for achieving stable demand and supply, and Japan's response. Mr. Ambyo of Coal Corporation, Indonesia, presented the coal production in Indonesia and forecast of demand. Mr. Wang of Ministry of Coal Industries, China, presented the change of coal industries for past ten years in China, coal strategy for coming seven years up to 2000, and export of coal. Mr. Wilcox of Association Coal Trade and Technology, Australia, emphasized the influence of China on energy problems and environment in Asia-Pacific region. Mr. Bomasang of Ministry of Energy, Philippine, summarized the discussions as a chairman. 9 figs., 1 tab.

  15. Fiscal 1996 survey for the upgrading of the Asia/Pacific coal development. Survey of the coal infrastructure propagation in Indonesia; 1996 nendo Asia Taiheiyo sekitan kaihatsu kodoka chosa. Indonesia ni okeru sekitan infura seibi chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    Phase 1 survey in fiscal 1996 was conducted based on `Agreement on the comprehensive survey of a coal transportation system in South Sumatra` concluded between NEDO and the Ministry of Mine and Energy in Indonesia. In the survey, conducted were collection of data on coal fields and site surveys, collection of data on inland transportation and site surveys, collection of data on harbors and site surveys, and worked out were a simplified database and a coal transportation plan by optimization of the coal chain system. The area for survey is the periphery of the Musi River of South Sumatra. The results of the simulation by LP models were as follows: When the coal of Bukit Asam coal mine is $25/t in price, only coal of 5500Kcal/kg is profitable, and when $27/t in price, coal of 4500Kcal/kg also becomes profitable. This shows that if the coal is of good quality, it can pay arriving at Suralaya, independent of the distance of transportation. 47 figs., 63 tabs.

  16. AC losses in superconducting parallel conductors (5). Dependence of the magnetization on the distance between the strands; Chodendo heiretsu dotai ni okeru koryu sonshitsu (5). Sosen kan kyori to jika

    Energy Technology Data Exchange (ETDEWEB)

    Nagasawa, M.; Tanaka, H.; Iwakuma, M.; Hunaki, K. [Kyushu University, Fukuoka (Japan)

    1999-11-10

    The transposition parallel conductor examines idea it is be and the electromagnetic property on us in order to attempt large current capacitating of the superconductive polycore line with the rectangular cross section. In the case of the transposition in the optimum position, when this deviated, though the shielding current is not induced between wires, the shielding current is induced, and the additive ac loss is generated. The quantitative evaluation of the magnetization by the shielding current is indispensable to this quantitative evaluation. The two parallel conductors were examined on the relation between magnetization and distance between wires by the shielding current from both sides of experiment and theory. (NEDO)

  17. AC losses of high temperature superconducting wires in combined condition of transverse magnetic field and transport current; Ojikai{center_dot}denryu no doji soinji ni okeru koon chodendo senzai no koryu sonshitsu

    Energy Technology Data Exchange (ETDEWEB)

    Kajikawa, K.; Takenaka, A.; Kawasaki, K.; Iwakuma, M.; Funaki, K. [Kyushu Univ., Fukuoka (Japan)

    2000-05-29

    We propose the summary measuring method as a method for conveniently evaluating ac loss under various electromagnetic environment of superconducting wire rod high precise. It has evaluated the ac loss as simultaneously; it has applied current and magnetic field until now to Bi-2223 silver sheath wire rod using this technique experimentally. And, got measurement result agreed with the numerical calculation result well, and it was able to verify the usefulness of this technique. However, the condition of the simultaneous sweep examined until now is only the case in which current and magnetic field are in-phases, and it is necessary to examine whether it is also estimable on the ac loss in both in case of phase difference by summary measuring method. This time, the ac loss as simultaneously, it applied precedence, current with phase difference in oxide superconducting wire rod and magnetic field to the experimental examination was estimated by numerical calculation. (NEDO)

  18. On the FEM analysis of free surface under AC magnetic field using GSMAC-ALE method; GSMAC-ALE ho wo mochiita koryu jibaka ni okeru yoyu kinzoku no jiyu hyomen no suchi kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Jung, C.Y. [Keio University, Tokyo (Japan); Minowa, T. [Mitsui and Co. Ltd., Tokyo (Japan); Tanahashih, T. [Keio University, Tokyo (Japan). Faculty of Science and Technology

    2000-07-25

    In this thesis, we show a new FEM (finite element method)-BEM (boundary element method) analysis of molten metal under alternating currents. Nowadays, it becomes more and more important to calculate MHD (magneto-hydrodynamics) flows under AC (Alternating current) magnetic field in order to control the molten metal processing in a furnace by an electromagnetic force. A former research makes clear the three-dimensional analysis for the circulating molten metal is rarely reported even today. Therefore, we try to carry out a three-dimensional calculation with the A-{phi} method using hybrid FEM-BEM, the improved method of the conventional FEM, and to capture the surface shape which influences the ALE method. The numerical analysis of an electromagnetic fluid using mercury is carried out and thus we can observe the complicatedly tangled physical parameters of an electromagnetic field in the vessel. To stabilize the meniscus shape, DC magnetic field is imposed and the shape of the surface is held in this case. (author)

  19. Flux density distribution and the ac loss near the glass-liquid transition temperature in high-Tc superconductors; Koon chodendo no jisoku gurasu-ekitai sen'i ondo kinbo ni okeru naibu jisoku bunpu to koryu sonshitsu

    Energy Technology Data Exchange (ETDEWEB)

    Ohashi, K.; Fujiyoshi, T. [Kumamoto Univ., Kumamoto (Japan); Kisu, T. [Kyushu Univ., Fukuoka (Japan); Yamafuji, K.

    1999-11-10

    It is possible that the high temperature superconductor keeps the superconductivity at boiling point of cheap liquid nitrogen, and the electric power application is expected. Then, the ac loss in the alternating current utilization becomes a problem. For the reason, analysis of the field distribution in the superconductor is necessary. Using the nonlinear E-J characteristics model in which high temperature superconductor was peculiar, the computer analyzed the field distribution of high temperature superconductor numerically, and the ac loss was evaluated. In addition, the theoretical evaluation of the ac loss was carried out using the model in which Bean model was made to consider the frequency dependence. (NEDO)

  20. Computer simulation of two-phase flow in geothermal well producing water and/or water-carbon dioxide mixtures; Mizu aruiwa mizu-tansan gas kongobutsu wo sanshutsusuru chinetsusei ni okeru kieki niso ryudo no simulation

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, S. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering; Nishi, K. [Japan Oil Development Co. Ltd., Tokyo (Japan)

    1995-10-25

    Mathematical programs to simulate two-phase flow in wellbores have been developed for water and/or water-carbon dioxide mixtures. `Bubble rise velocities` in the slug flow regime are estimated using three methods: Orkiszewski (1967), Nicklin et al. (1962) and a modified Nicklin method. The modified Nicklin method uses {Lambda} = 0.1 instead of {Lambda} = 0.2 as in the Nicklin method. A package has been developed to estimate the phase behaviors of the water-carbon dioxide system. The three methods are evaluated by comparing calculated results with measured data from a Japanese geothermal field. Good results are obtained at moderate to large production rates, however there are some differences between the predicted and actual data at low rates. The average absolute deviation of percentage errors between predicted pressure losses and the field data is 6.21, with standard deviation of 5.72, excluding the low rate cases. The simulation program can estimate the following variables: pressure, temperature, specific enthalpy, flashing point, flow regime, carbon dioxide solubility in water, and can give phase diagrams of the water-carbon dioxide system, which includes the carbon dioxide content of the water and gas phases, and the quality of the gas phase. 12 refs., 15 figs., 5 tabs.

  1. FY 1997 report on the investigation on the actual status of international research information exchange in research organizations in Japan and U.S.A; 1997 nendo chosa hokokusho (Nichibei kenkyu kikan ni okeru kokusai kenkyu koryu jittai chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    An investigation was made on the actual status of utilizing researchers from foreign countries and internationally exchanging researchers with views on technological researchers in universities and public institutes in Japan and the U.S.A. Foreign researchers at 39 research institutes in the Tsukuba area are from Asian region at 43%, and European and North American regions at 43%. Asian researchers are dominated overwhelmingly by Chinese and Korean people. Researchers from Europe and North America have a high ratio of working at institutes belonging to the Ministry of International Trade and Industry, and many of them are of short period staying type. On the other hand, many of those from African regions intend to study diplomatic and cultural exchange, and those from Middle and South American regions to study agricultural and fishery industries. About 8.4% of the scientists and engineers who obtained doctorates in America in 1995 is foreign nationals, and about 83.3% of them is of long period staying type. Foreign students in the U.S.A. account for 3.1% of students in institutions of higher education. The higher the education level, the higher the foreign student ratio, whereas the ratio reaches 33.0% in doctoral courses. Persons who obtained doctorates in the department of science and engineering are, in decreasing order, Chinese, Taiwanese, Indian and Korean. 32 figs., 47 tabs.

  2. Ionization current in N2 gas. Part 7. ; Diffusion and reflection of metastable particles. N2 gas chu ni okeru denri denryu. 7. ; Jun antei reiki ryushi no kakusan to hansha

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, S.; Ito, H.; Sekizawa, H. (Chiba Inst. of Technology, Chiba (Japan)); Ikuta, N. (Tokushima Univ., Tokushima (Japan))

    1993-06-20

    The energy loss process in quenching of excited particles by collision to other ones and solid surfaces was investigated with metastable excited particles formed in weakly ionized gases. The measured lifetime of N2 metastable particles in N2, N2/CO, N2/CH3 gases during Townsent discharge did not agree with the Molnar's theoretical value which was obtained by solving diffusion equations using the boundary condition that assumes the density of excited particles to be zero at electrodes and tube walls. Strange behavior was observed too, that is, coefficients of diffusion and reaction rate determined by the theoretical lifetime change systematically with the distance between electrodes. Then, the novel boundary condition that takes reflection coefficient into account was applied to solve diffusion equations. The results obtained could account for experimental results without any discrepancy. The analysis of results clarified the dependence of various parameters of metastable excited particles on the reflection coefficient. The increase of reflection coefficient decreases the surface quenching of excited particles at electrodes and elongs effectively excited lifetime and increases the number of collisional quenching in gas phases. 16 refs., 8 figs.

  3. Pressure dependence of emission intensity of rare-gas excimer light produced by silent discharge; Teikiatsu ryoiki ni okeru musei hoden reiki ki gas excimer hikari shutsuryoku no atsuryoku izonsei

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Y.; Tanaka, M.; Yukimura, K. [Doshisha University, Kyoto (Japan)

    1996-09-20

    To establish the pressure dependence of silent discharge excited rare gas excimer light emission, a vacua ultraviolet light was subjected to spectroscopic analysis at a pressure lower than 20kPa. Researches are under way to apply the discharge excited rare gas excimer lamp as a vacuum ultraviolet light source for the development of new materials and for the conservation of environments. When the pressure is as low as 1.8kPa or 4.4kPa, the emission has peaks at wavelengths centering on 147nm and 149nm, both of which are the resonance lines of the xenon atom. Excimer generation becomes prominent as the pressure increases, with the second continuum of light growing dominant at 35kPa to weaken relatively the resonance lines and the first continuum of light. In the first continuum, emission increases only at a suppressed rate, as compared with emission in the second continuum, due for instance to a collision caused relaxation process in which excimers are lost. In the case of xenon in the vicinity of 10-11kPa, the first continuum of light and the second continuum of light are approximately equal in emission intensity, producing a vacuum ultraviolet light source with a bandwidth relatively large for a single gas spectrum. 14 refs., 11 figs.

  4. Determination of electron impact ionization and excitation coefficients in He-Xe gas mixtures. He-Xe kongo gas ni okeru denshi shototsu denri keisu oyobi reiki keisu no sokutei to kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, K.; Tachibana, K. (Kyoto Inst. of Technology, Kyoto (Japan))

    1991-03-20

    The rare gas discharge gives a stable discharge and light emission characteristics at low temperature in comparison with the discharge of the vapor of such a metal as Hg. The present barrier for the commercialization of the color PDP lies in the lower level of its emission intensity and efficiency in comparison with that of CRT. In this report, an electron impact ionization coefficient in a gas mixture and an electron impact excitation coefficient for a XeIs {sub 4} level were analyzed using a Boltzmann equation by means of a steady state Townsend method using a drift tube. By comparing both, the elementary process in the gas mixture is investiagted to discuss the respective contributions for the effective ionization coefficient and the excitation coefficient. As a result, it was found that the ionization process in the He-Xe gas mixture could be described by the processes of direct ionization of Xe and He, and an indirect ionization (Penning effect) by an active helium. 37 refs., 12 figs.

  5. Generation of metallic arc spectrum of pumping discharge of XeCl laser; XeCl ekishima laser reiki hoden ni okeru arc iko to kinzoku supekutoru no hassei

    Energy Technology Data Exchange (ETDEWEB)

    Koike, H.; Yukimura, K. [Doshisha University, Kyoto (Japan)

    1997-12-20

    An arc generation of a long-pulse spiker-sustainer excimer laser with about 250ns of pulse width , is discussed by using time-varying spectroscopic method. First arcing occurs during a main discharge for laser excitation and shows XeII spectrum, while a glow-like discharge represents only XeI spectrum, the metallic spectrum such as Nil caused by vaporization of electrode material begins to appear just after the termination of the main discharge. Second arcing occurs after about 2{mu}s, which brings strong intensity of Nil spectrum. It means that the reignition arc might be produced in a metallic vapor that appears during the main discharge. Accordingly, it is concluded that the reignition arc is inherently metallic, which is different from the main arc with rare gas plasma. 9 refs., 9 figs.

  6. Influence on driver fatigue of vertical vibrations over long distances. Assessment in terms of stress hormones; Driver no unten hiro ni okeru joge shindo no eikyo. Stress hormone wo shiyo to shite

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, T.; Inagaki, H. [Toyota Central Research and Development Labs., Inc., Aichi (Japan)

    1998-05-01

    Driving tests are conducted to obtain some indexes that describe the cumulative effect of the sense of tiredness. The heart rate, Mayer wave related sinus arrhythmia, respiratory sinus arrhythmia, urinary adrenaline, noradrenaline, and cortisol in saliva are tested. Adrenaline and Mayer wave related sinus arrhythmia are ultimately named in view of their correlation with tiredness. It is believed that tiredness is attributable to two factors, which are increase in mental stress and decrease in vigilance. An excitation test is then conducted using a motion simulator. Upon application of 4Hz vibrations (equivalent to the chest section resonance frequency), adrenaline increases sharply, and then decreases sharply upon termination of excitation. Upon application of 1.6Hz vibrations (equivalent to the head section resonance frequency), adrenaline increases but not sharply, and the elevated level is sustained for some time after excitation. Driving tests are next conducted using a vehicle with its suspension fixed and another with 1-2Hz vibrations reduced. Rise in the adrenaline level is found inhibited aboard the latter. No difference is detected in terms of Mayer wave related sinus arrhythmia between the two vehicles. 4 refs., 7 figs., 4 tabs.

  7. Basic investigation on feasibility of verification researches for new energy technologies in Asian developing countries (Nepal, Mongolia and Bhutan); Asia kohatsu kaihatsu tojokoku (Neparu Mongoru Butan) ni okeru shin energy gijutsu jissho kenkyu kanosei kiso chosa

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    A basic investigation has been carried out on feasibility for performing joint verification researches on new energy technologies being developed in Japan with Asian developing countries (Nepal, Mongolia, and Bhutan). Nepal has abundant new energy resources including mini-hydropower, solar energy, wind power, and biomass energy. Among them, the mini-hydropower generation is applied to electrification of communities. Other energy sources are also used though in small scales. The Royal Nepal Academy of Science and Technology is actively engaged in efforts for the research and development of new energies. The energy policy of the Mongolian Government calls for expansion of coal burning thermal power plants with the abundant coal availability as the background, and development of new energies to reduce import of liquid fuels. The research and development on new energy has been conducted by the Renewable Energies Scientific Production Corporation. The Bhutan`s energy policy is to develop mini-hydropower stations using inexhaustible hydraulic power in an attempt to replace the conventional fuel resources of firewoods and charcoals with electric power. The agency to be dealt with is the Department of Electric Power of the Ministry of Trade, Industry and Electric Power. 7 figs., 40 tabs.

  8. Nissei incas system (FP-Plan) which databased the skilled sense and experiences in molding metal design. Kanagata sekkei ni okeru kan ya keiken wo data base kashita Nissei incas system (FP-plan)

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, K. (Nissei Plastic Industrial Co. Ltd., Nagano (Japan))

    1992-01-01

    Mold System Department of Nissei Resin Industies Co. has developed NISSEI INCAS SYSTEM, which is a CAD/CAM/CAE system specially for injection metal molding. Generally, high analysis methods such as flow analysis method have been considered for CAE, though, when making it to be linked with designing works for injection molding metals, economic conditions will not make a balance. Since authors have judged that to make an accurate mold metal drawing more quickly, before adopting such kind of flow analysis, more inportant and fundamental problems might be remained, they have started to develope their own system called FP-PLAN. This system, for example, is a software, which paying mainly attention to the most important and common problems for molding metal design to be solved, such as setting of shrinking factor, gate and runner design, estimation of cavity inside pressure, etc. Specially, they have developed only small molding products (product volume shall be under 200 cm {sup 3}). In this report, outlines of FP-PLAN such as the characteristics and programs have been intrduced. 4 figs., 2 tabs.

  9. Evaluation of earthquake ground motions for aseismatic design of high rise buildings in Tokyo bay area. Tokyo wangan ni okeru koso kenchikubutsu no taishin sekkei yo nyuryoku jishindo hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Ota, T.; Shima, E.; Niwa, M.; Ikeura, T. (Kajima Inst. of Construction Technology, Tokyo (Japan)); Takemura, M. (Kajima Corp., Tokyo (Japan))

    1991-08-30

    A proposal is made on the evaluation method for design input ground motions, which is based on the examples of earthquake ground motions evaluated using fault models and is supported by the concept for future design earthquake ground motions. The features of this evaluation method are to designate earthquakes to be considered and evaluate the ground motions in the applicable site employing fault models. Waveform synthesis method is used where uneven sliding on the fault surface in the earthquake site is taken into consideration. A method of evaluating ground motions in the site using fault models is employed in lieu of the conventional method which is used for aseismatic design input ground motions for high rise buildings, and an example is given quoting the case of reclaimed land and alluvial ground at Yokohama City, Japan. The studied earthquakes are hypothetical recurrence of 1923 southern Kanto earthquake and hypothetical earthquake in Tokai region, and the evaluation of the ground motions is made by waveform synthesis method using fault models for which records of medium scale ground motions obtained near those sites are used. The maximum ground accelerations of about 330Gal and 115Gal, and the maximum velocities of about 40cm/s and 20cm/s are obtained for the hypothetical southern Kanto earthquake and the hypothetical earthquake in Tokai region, respectively. 32 refs., 16 figs., 3 tabs.

  10. Effects of imposing higher-order far-field boundary conditions on the numerical solution of the two-dimensional compressible Euler equations. Nijigen asshukusei Euler hoteishiki no suchi keisan ni okeru koji enpo kyokai joken tekiyo koka no kento

    Energy Technology Data Exchange (ETDEWEB)

    Nishitani, T. (Toray Industries, Inc., Tokyo (Japan)); Satofuka, N.; Tokunaga, H. (Kyoto Institute of Technology, Kyoto (Japan). Faculty of Engineering and Design)

    1994-03-25

    Solving numerically a flow field around an object assumed of an infinite far field often becomes necessary for analyzing such an object important in terms of engineerings as represented by an airframe. This paper describes an application of high-order boundary conditions to analyzing an external flow field by using a positive line method for solving a two-dimensional compressible Euler equation to compare the result with the conventional low-order boundary conditions and discuss the convergence and the calculation efficiency. A discussion has also been given on such a case that an angle of attack is given to a wing under a condition of generating shock waves, and the position of a shock wave is varied above and below the wing. The calculation lattice is constructed by a C-shape around an NACA0012 wing shape with a chord length of one. Parameters varying distances to the forward boundary and the rearward boundary simultaneously were established. When a high-order boundary condition is used, lift coefficient is hardly subjected to the influence even if the forward and rearward boundary distances are varied simultaneously. Use of the high-order boundary condition tends to reduce the convergence. The fewer the number of lattice, the smaller the degree of the decrease. 5 refs., 11 figs., 4 tabs.

  11. Characteristics of contact resistance for Ag, Cu and Al spot contact under DC current flow of 300A; Gin, do oyobi arumi tensesshokushi no chokuryu 300A tsudenji ni okeru sesshoku teiko tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Aichi, H. [Daido Institute of Technology, Nagoya (Japan); Matsumura, T. [Nagoya University, Nagoya (Japan); Miyachi, I. [Aichi Inst. of Technology, Aichi (Japan)

    1997-07-01

    The temperature rise of the contact spot by Joule`s heat under high current flow may result in the softening or welding of the contact materials. Contact resistances of Ag, Cu and Al spot contacts have been observed under the current flow of up to 300A DC. The contact resistances of Ag and Cu with clean surfaces were revealed to be kept constant independent of the magnitude of the applied current flow. On the other hand, contact resistances of Al and Cu with oxidized surfaces were greatly reduced with the increasing current flow. 7 refs., 5 figs., 2 tabs.

  12. Simulation method of ATM switch architecture and proposal for the delay priority control in ATM crosspoint switch; ATM kokanki no simulation shuho to crosspoint switch ni okeru chien yusen seigyo no teian

    Energy Technology Data Exchange (ETDEWEB)

    Doi, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-03-01

    A simulation method for switch analysis of ATM (asynchronous transfer mode) switch architecture has been developed. When various electric power information is integrated in the ATM switch architecture, delay priority control method has been proposed, by which the delay time and delay time fluctuation can be guaranteed for important information, such as system protection control information. The simulation method has been developed for analyzing the output buffer type crosspoint switch. The analysis solutions of waiting time of cells at the switch were determined and compared with the simulation results. The both agreed well mutually, and the validity of this method was confirmed. Priority was added to the cells of crosspoint switch, and different buffer was given for each priority, to exchange the important information, selectively. Thus, a switch was proposed, by which the delay time and delay time fluctuation can be restricted. The mean waiting time of the high class cells was suppressed less than 1 cts even at the switch load factor of 0.98, and the fluctuation range of 4 cts was guaranteed. 11 refs., 19 figs.

  13. Utilization of two-way multicore cables and comparison of various electrode configurations in electrical prospecting; Denki tansa ni okeru sohokogata tashin cable no riyo to kakushu dekyoku haichi no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Takakura, S. [Geological Survey of Japan, Tsukuba (Japan); Matsushima, J. [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1996-10-01

    For more precise electrical prospecting, the new multicore cable was developed to allow high-density measurement by conventional equipment. Since conventional multicore cables are inferior in cost, length and weight, the new cable is composed of an n-conductor cable, two n-conductor male connectors and n lead wires. For connection of the multi-conductor cable and lead wires, cable sheath is peeled at n points at specific intervals. Sheath of the k-th conductor is peeled at k-th point from the terminal, and restored for insulation after connection of the conductor and lead wire. The male connectors are attached to the both ends of the multi-conductor cable. Since this two-way type cable can be used at every end, the measuring equipment can measure at one divisional point after another of a long measuring line while shifting the equipment from one point to another. All measurements are perfected only with two short cables. Resistivities were successfully measured along the long measuring line of 480m long with 97 electrodes arranged at intervals of 5m. Various electrode configurations were also compared. 1 ref., 4 figs., 2 tabs.

  14. Comparison between pervaporation and vapor permeation for separation of water-alcohol mixtures using a polyion complex membrane; Polyion complex maku wo mochiita mizu/alcohol kongoeki bunri ni okeru shinto kikaho to joki tokaho no hikaku

    Energy Technology Data Exchange (ETDEWEB)

    Hamada, t. [Daicel Chemical Industries, Ltd., Osaka (Japan); Taya, M.; Tone, S. [Osaka University, Osaka (Japan). Faculty of Engineering Science

    1997-03-10

    A water-alcohol separation experiment based on the pervaporation (in which the membrane touches the feed solution side) and vapor permeation (in which it touches the vapor) methods of water-ethanol and water-2-propanol azeotropic mixtures was conducted using the polyion complex membrane that is a water permselective membrane. In both methods, the total permeation flux was higher in pervaporation than in vapor permeation in the range where the mole fraction of ethanol and 2-propanol in a feed solution is less than 0.9. The separation factor was higher in pervaporation than in vapor permeation in the range where the mole fraction in a feed solution is more than 0.9 in water-ethanol and more than 0.7 in water-2-propanol. The membrane separation efficiency based on a solution-diffusion theory was represented as a separation index that is the product of the total permeation flux and separation factor. The separation index was higher in pervaporation than in vapor permeation in the range where the mole fraction in a feed solution is more than 0.82 in water-ethanol and more than 0.43 in water-2-propanol. 8 refs., 3 figs., 1 tab.

  15. Coliquefaction of coal, tar sand bitumen and plastic (interaction among coal, bitumen and plastic); Sekitan/tar sand bitumen/plastic no kyoekika ni okeru kyozon busshitsu no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, H.; Okuyama, Y.; Matsubara, K. [NKK Corp., Tokyo (Japan); Kamo, T.; Sato, Y. [National Institute for Resources and Environment, Tsukuba (Japan)

    1996-10-28

    For the improvement of economy, coliquefaction of coal, tar sand bitumen and plastic was performed under low hydrogen pressure, to investigate the influence of interaction among these on the liquefaction characteristics. For comparison, coliquefaction was also performed under the hydrogen pressure same as the NEDOL process. In addition, for clarifying its reaction mechanism, coliquefaction of dibenzyl and plastic was performed as a model experiment, to illustrate the distribution of products and composition of oil, and to discuss the interaction between dibenzyl and various plastics, and between various plastics. Under direct coal liquefaction conditions, coprocessing of Tanito Harum coal, Athabasca tar sand and plastic was carried out under low hydrogen pressure with an autoclave. The observed value of oil yield was higher than the calculated value based on the values from separate liquefaction of coal and plastic, which suggested the interaction between coal and the mixed plastic. The results of coliquefaction of coal, tar sand bitumen and plastic could be explained from the obtained oil yield and its composition by the coliquefaction of dibenzyl and plastic. 2 refs., 3 tabs.

  16. Oxidation behavior of Ni powder and Ni powder compact; Ni fun oyobi Ni fun atsufuntai no sanka kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, M.; Ochiai, S.; Watanabe, Y. [Teikyo Univ., Tokyo (Japan)

    1997-09-15

    With an objective to investigate reactions of metal powder and metal powder compact having open pores with gases, their oxidation behavior was elucidated by taking Ni powder and Ni powder compact as examples. Oxidation rate of the Ni powder can be expressed by the Jander equation, and activation energy for the oxidation was 0.948 times 10 {sup 5} J/mol. Oxidation rate of the Ni powder compact is equal to that of powder not made into compact in the initial stage of the oxidation, but it decreases as time elapses because of occurrence of packing of oxide. Difference in oxidation rate inside and outside the powder compact is very little. The oxidation rate of the powder compact was analyzed by using an improved Jander model. More specifically, a model was used, in which concentration difference of diffused components in the oxides decreases with progress of the oxidation, whereas 1.113 times 10 {sup 5} J/mol was derived as the activation energy of the oxidation. The cause for the activation energy for the oxidation of the powder and powder compact being about half of that for bulk Ni is because of low temperature oxidation of the powder, and tensile stress generated between metal particles and spherical shell shaped oxides, which make production of Ni {sup 2+} more difficult. 5 refs., 4 figs., 1 tab.

  17. Nitriding behavior of Ni and Ni-based binary alloys

    Energy Technology Data Exchange (ETDEWEB)

    Fonovic, Matej

    2015-01-15

    Gaseous nitriding is a prominent thermochemical surface treatment process which can improve various properties of metallic materials such as mechanical, tribological and/or corrosion properties. This process is predominantly performed by applying NH{sub 3}+H{sub 2} containing gas atmospheres serving as the nitrogen donating medium at temperatures between 673 K and 873 K (400 C and 600 C). NH{sub 3} decomposes at the surface of the metallic specimen and nitrogen diffuses into the surface adjacent region of the specimen whereas hydrogen remains in the gas atmosphere. One of the most important parameters characterizing a gaseous nitriding process is the so-called nitriding potential (r{sub N}) which determines the chemical potential of nitrogen provided by the gas phase. The nitriding potential is defined as r{sub N} = p{sub NH{sub 3}}/p{sub H{sub 2}{sup 3/2}} where p{sub NH{sub 3}} and p{sub H{sub 2}} are the partial pressures of the NH{sub 3} and H{sub 2} in the nitriding atmosphere. In contrast with nitriding of α-Fe where the nitriding potential is usually in the range between 0.01 and 1 atm{sup -1/2}, nitriding of Ni and Ni-based alloys requires employing nitriding potentials higher than 100 atm{sup -1/2} and even up to ∞ (nitriding in pure NH{sub 3} atmosphere). This behavior is compatible with decreased thermodynamic stability of the 3d-metal nitrides with increasing atomic number. Depending on the nitriding conditions (temperature, nitriding potential and treatment time), different phases are formed at the surface of the Ni-based alloys. By applying very high nitriding potential, formation of hexagonal Ni{sub 3}N at the surface of the specimen (known as external nitriding) leads to the development of a compound layer, which may improve tribological properties. Underneath the Ni{sub 3}N compound layer, two possibilities exist: (i) alloying element precipitation within the nitrided zone (known as internal nitriding) and/or (ii) development of metastable and

  18. Abnormal Intermetallic Compound Evolution in Ni/Sn/Ni and Ni/Sn-9Zn/Ni Micro Solder Joints Under Thermomigration

    Science.gov (United States)

    Zhao, N.; Deng, J. F.; Zhong, Y.; Huang, M. L.; Ma, H. T.

    2017-04-01

    Interfacial reactions in Ni/Sn/Ni and Ni/Sn-9Zn/Ni micro solder joints during thermomigration (TM) have been studied by reflowing solder joints on a hot plate. Asymmetrical growth and transformation of interfacial intermetallic compounds (IMCs) were clearly observed. The growth of the Ni3Sn4 IMC in the Ni/Sn/Ni solder joints was always fast at the cold end and relatively slow at the hot end. Only asymmetrical growth of the Ni5Zn21 IMC in the Ni/Sn-9Zn/Ni solder joints occurred at the beginning because Zn was the dominant TM species; however, asymmetrical transformation of the Ni5Zn21 IMC also occurred under the combined effect of Zn depletion and Ni dissolution and migration, resulting in formation of a thin τ-phase layer at the hot end and a thick τ-phase/Ni5Zn21/τ-phase sandwich structure at the cold end. TM of Ni and Zn atoms was identified towards the cold end, being responsible for the abnormal IMC evolution. Addition of Zn was found to slow the TM-induced IMC growth and Ni dissolution.

  19. Electronic structure of Ni/sub 3/Al and Ni/sub 3/Ga alloys

    CERN Document Server

    Pong, W F; Chang, Y K; Tsai, M H; Hsieh, H H; Pieh, J Y; Tseng, P K; Lee, J F; Hsu, L S

    1999-01-01

    This work investigates the charge transfer and Al(Ga) p-Ni d hybridization effects in the intermetallic Ni/sub 3/Al(Ni/sub 3/Ga) alloy using the NiL/sub 3.2/- and K-edge and Al(Ga)K X-ray absorption near edge structure (XANES) measurements. We find that the intensity of white-line features at the NiL/sub 3.2/-edge in the Ni/sub 3/Al(Ni /sub 3/Ga) alloy decreased in comparison with that of pure Ni, which can be attributed to the enhancement of Ni3d states filling and the depletion of the density of Ni 3d unoccupied states in the Ni/sub 3 /Al(Ni/sub 3/Ga) alloy. Two clear features are also observed in the Ni/sub 3/Al(Ni/sub 3/Ga) XANES spectrum at the Al(Ga) K-edge, which can be assigned to the Al(Ga) unoccupied 3p (4p) states and their hybridized states with the Ni 3d/4sp states above the Fermi level in Ni/sub 3/Al(Ni/sub 3/Ga). The threshold at Al K-edge XANES for Ni/sub 3/Al clearly shifts towards higher photon energies relative to that of pure Al, indicating that Al loses charges upon forming Ni/sub 3 /Al. ...

  20. Measurement of 59Ni and 63Ni by accelerator mass spectrometry at CIAE

    Science.gov (United States)

    Wang, Xiaoming; He, Ming; Ruan, Xiangdong; Xu, Yongning; Shen, Hongtao; Du, Liang; Xiao, Caijin; Dong, Kejun; Jiang, Shan; Yang, Xuran; Lan, Xiaoxi; Wu, Shaoyong; Zhao, Qingzhang; Cai, Li; Pang, Fangfang

    2015-10-01

    The long lived isotopes 59Ni and 63Ni can be used in many areas such as radioactive waste management, neutron dosimetry, cosmic radiation study, and so on. Based on the large accelerator and a big Q3D magnetic spectrometer, the measurement method for 59Ni and 63Ni is under development at the AMS facility at China Institute of Atomic Energy (CIAE). By using the ΔE-Q3D technique with the Q3D magnetic spectrometer, the isobaric interferences were greatly reduced in the measurements of 59Ni and 63Ni. A four anode gas ionization chamber was then used to further identify isobars. With these techniques, the abundance sensitivities of 59Ni and 63Ni measurements are determined as 59Ni/Ni = 1 × 10-13 and 63Ni/Ni = 2 × 10-12, respectively.

  1. ni potni list

    Directory of Open Access Journals (Sweden)

    Ana Krajnc

    1996-12-01

    Full Text Available Decembra 1994 je bila v Rimu velika mednarodna konferenca o permanentnem ali vse življenje trajajočem izobraževanju. Široki strokovni javnosti sta bila takrat prvič predstavljena tudi dva nova pojma: osebni učni načrt in učni potni list. Pri priči sta se prijela v teoriji in praksi - očitno sta bila oba predloga odsev potreb.

  2. Relation between shape of Ni-particles and Ni migration in Ni-YSZ electrodes – a hypothesis

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Hauch, Anne; Sun, Xiufu

    2016-01-01

    pressure (pH2O) gradient as previously observed [1], but in the present cases Ni seems to migrate up the pH2O gradient. However, it is also observed that there is a preceding phase in this Ni-YSZ electrode degradation, namely that the Ni-particles closest to the YSZ electrolyte loose contact to each other...

  3. Comprehensive theoretical studies on the low-lying electronic states of NiF, NiCl, NiBr, and NiI.

    Science.gov (United States)

    Zou, Wenli; Liu, Wenjian

    2006-04-21

    The low-lying electronic states of the nickel monohalides, i.e., NiF, NiCl, NiBr, and NiI, are investigated by using multireference second-order perturbation theory with relativistic effects taken into account. For the energetically lowest 11 lambda-S states and 26 omega states there into, the potential energy curves and corresponding spectroscopic constants (vertical and adiabatic excitation energies, equilibrium bond lengths, vibrational frequencies, and rotational constants) are reported. The calculated results are grossly in very good agreement with those solid experimental data. In particular, the ground state of NiI is shown to be different from those of NiF, NiCl, and NiBr, being in line with the recent experimental observation. Detailed analyses are provided on those states that either have not been assigned or have been incorrectly assigned by previous experiments.

  4. Studies on the air distribution and thermal performance of the air circulation wall. Part 4. Study on the thermal emissivity of the air circulation layer`s surfaces; Gaidannetsu tsuki koho ni okeru tsuki sonai no netsu tsuki tokusei ni kansuru kenkyu. 4. Tsuki sonai hyomen no hosha tokusei ni kansuru kosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kamimori, K.; Sakai, K.; Ishihara, O. [Kumamoto University, Kumamoto (Japan)

    1996-10-27

    The thermal and air distribution characteristics of the air circulation wall in a heat-insulated system were grasped using an experimental model. In this paper, the difference in the heat exchange between the wall and air was confirmed based on the radiation on the circulation layer`s surface. In this system, thin air circulation layers with ventilating holes at the top and bottom are attached to the south and north outer walls of a wooden building. This system is a kind of passive solar house that achieves the insolation screening effect and the temperature rising effect based on solar collection. The heat flow in a circulation layer is eliminated by the natural convection heat transfer on the outer wall. The heat flow passing through insulating materials is the heat transfer by radiation. The heat flow based on the in-layer natural convection is increasingly eliminated by the decrease in temperature on the air circulation layer`s surface. The decrease in room surface temperature using aluminum foil and the reflective heat-insulated effect showed that the heat passing through the wall surface decreases as the convection heat transfer in an air circulation layer increases. 6 refs., 20 figs., 3 tabs.

  5. CONFIGURATION-INTERACTION IN NI METAL AND NI-ALLOYS AND HIGH-ENERGY SPECTROSCOPY

    NARCIS (Netherlands)

    TANAKA, A; JO, T; SAWATZKY, GA

    We discuss the electronic state of Ni atoms in Ni metal and of Ni impurity in Cu and Au metals from the viewpoint of 3d configuration interaction (CI) using the Anderson impurity model including atomic multiplets. On the basis of the discussion, we give an interpretation for the Ni 2p-core X-ray

  6. Laser alloyed Al-Ni-Fe coatings

    CSIR Research Space (South Africa)

    Pityana, SL

    2008-10-01

    Full Text Available The aim of this work was to produce crack-free thin surface layers consisting of binary (Al-Ni, Al-Fe) and ternary (Al-Ni-Fe) intermetallic phases by means of a high power laser beam. The laser surface alloying was carried out by melting Fe and Ni...

  7. Kinetics of Ni2Si growth from pure Ni and Ni(V) films on (111) and (100) Si

    Science.gov (United States)

    Harith, M. A.; Zhang, J. P.; Campisano, S. U.; Klaar, H.-J.

    1987-01-01

    The kinetics of Ni2Si growth from pure Ni and from Ni0.93V0.07 films on (111) and (100) silicon has been studied by the combination of He+ backscattering, x-ray diffraction, Auger electron spectroscopy (AES) and transmission electron microscopy (TEM) techniques. The activation energies are 1.5 and 1.0 eV for pure Ni and Ni(V) films, respectively while the pre-exponential factors in Ni(V) are 4 5 orders of magnitude smaller than in the pure Ni case. The variations in the measured rates are related to the different grain size of the growing suicide layers. The vanadium is rejected from the silicide layer and piles up at the metalsilicide interface.

  8. Synthesis and catalytic performance of SiO2@Ni and hollow Ni microspheres

    Science.gov (United States)

    Liu, Xin; Liu, Yanhua; Shi, Xueting; Yu, Zhengyang; Feng, Libang

    2016-11-01

    Nickel (Ni) catalyst has been widely used in catalytic reducing reactions such as catalytic hydrogenation of organic compounds and catalytic reduction of organic dyes. However, the catalytic efficiency of pure Ni is low. In order to improve the catalytic performance, Ni nanoparticle-loaded microspheres can be developed. In this study, we have prepared Ni nanoparticle-loaded microspheres (SiO2@Ni) and hollow Ni microspheres using two-step method. SiO2@Ni microspheres with raspberry-like morphology and core-shell structure are synthesized successfully using SiO2 microsphere as a template and Ni2+ ions are adsorbed onto SiO2 surfaces via electrostatic interaction and then reduced and deposited on surfaces of SiO2 microspheres. Next, the SiO2 cores are removed by NaOH etching and the hollow Ni microspheres are prepared. The NaOH etching time does no have much influence on the crystal structure, shape, and surface morphology of SiO2@Ni; however, it can change the phase composition evidently. The hollow Ni microspheres are obtained when the NaOH etching time reaches 10 h and above. The as-synthesized SiO2@Ni microspheres exhibit much higher catalytic performance than the hollow Ni microspheres and pure Ni nanoparticles in the catalytic reduction of methylene blue. Meanwhile, the SiO2@Ni catalyst has high stability and hence it can be recycled for reuse.

  9. Formation of NiCrAlY/NiAl multi-layered coating by low pressure plasma spraying; Genatsu plasma yosha ni yoru NiCrAlY/NiAl tasomaku no seisei

    Energy Technology Data Exchange (ETDEWEB)

    Takizawa, H. [Industrial Res. Inst. of Nagano Pref., Nagano (Japan).; Yonehama, K.; Sugimoto, K.; Kobayashi, M. [Shinshu Univ., Nagano (Japan). Faculty of Education

    1997-12-15

    NiCrAlY/NiAl multi-layered coating was produced on SUS310S steel by means of mutual low pressure plasma spraying of NiCrAlY and Al powders which was accompanied with self-propagating high-temperature synthesis (SHS) reaction of metal deposits. The NiAl layer contained Ni3Al particles and Cr2Al phase along the fine grain boundary. Also, Ni3Al was detected in the NiCrAlY layer with a small amount of NiAl particles. As the result, high hardness was obtained in both the layers, i.e., 650HV in NiAl layer and 450HV in NiCrAlY one at 673K. The structure of the multilayered coating changed hardly during annealing lower than 973K because enriched Cr at NiCrAlY/NiAl interface suppressed NiAl + Ni3Al{yields}Ni5Al3 peritectoid reaction. The SHS reaction time of an compressed Al droplet in diameter of 50{mu}m was calculated as 4.17times10{sup -3} second. 20 refs., 9 figs., 3 tabs.

  10. niños preescolares

    Directory of Open Access Journals (Sweden)

    Claudia Rosario Portilla Ramírez

    2007-01-01

    Full Text Available Este estudio explora la relación entre la escritura y la comprensión de la referencia a través de una tarea de sinonimia en niños entre 5 y 6 años de edad, de origen latinoamericano, escolarizados en Barcelona (España. Las variables relacionadas con la tarea de sinonimia fueron (a la comprensión de la entidad lingüística nombre y (b el nivel de conceptualización de la escritura de los niños y la presencia de etiquetas escritas durante la tarea. Para la tarea de sinonimia se utilizaron pares de sinónimos dialectales del español (de Latinoamérica y de la Península Ibérica. Los resultados mostraron una diferenciación en el razonamiento de los niños, la cual dependía de la comparación entre lenguaje oral y lenguaje escrito en el desarrollo de la tarea, evidenciando una mayor aceptación de la sinonimia en la modalidad de lenguaje oral que en la modalidad de lenguaje escrito.

  11. Exclusive study of Ni+Ni and Ni+Au central collisions: phase coexistence and spinodal decomposition; Etude exclusive des collisions centrales Ni+Ni et Ni+Au: coexistence de phase et decomposition spinodale

    Energy Technology Data Exchange (ETDEWEB)

    Guiot, B

    2002-12-01

    The INDRA multidetector allowed us to study the Ni+Ni collisions at 32A MeV and the Ni+Au collisions at 52,4 MeV. Central collisions leading to 'quasi-fused' systems were isolated using multidimensional analysis techniques: the Discriminant Analysis and the Principal Component Analysis. Comparison with a statistical model shows that the selected events are compatible with thermodynamical equilibrium. The average thermal excitation energy is 5A MeV for both systems. Calculations of heat capacities show that the deexcitation of the hot sources are akin to a liquid-gas phase transition of nuclear matter. Indeed heat capacities exhibit a negative branch as expected for a phase transition of a finite system. The dynamics of this phase transition has been investigated by applying the charge correlation method. An enhanced production of events with equal-sized fragments has been evidenced for Ni+Au at 52A MeV. No signal was found for Ni+Ni at 32A MeV. Finally this method was improved by taking into account the total charge conservation. The signal is seen more clearly for Ni+Au at 52A MeV, but is ambiguous for Ni+Ni at 32A MeV. The path followed in the state diagram, or the involved time scales, seem to be different for these systems. (authors)

  12. Effect of air annealing on structural and magnetic properties of Ni/NiO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Nadeem, K., E-mail: kashif.nadeem@iiu.edu.pk [Nanomagnetism and Nanotechnology Laboratory, International Islamic University, Islamabad (Pakistan); Ullah, Asmat; Mushtaq, M.; Kamran, M.; Hussain, S.S. [Nanomagnetism and Nanotechnology Laboratory, International Islamic University, Islamabad (Pakistan); Mumtaz, M. [Materials Research Laboratory, Department of Physics, International Islamic University, Islamabad (Pakistan)

    2016-11-01

    We reported systematic study on structural and magnetic properties of nickel/nickel oxide (Ni/NiO) nanoparticles annealed under air atmosphere at different temperatures in the range 400–800 °C. The XRD spectra revealed two phases such as Ni and NiO. The average crystallite size increases with increasing annealing temperature. A phase diagram was developed between two phases versus annealing temperature using XRD analysis. At lower annealing temperatures, Ni phase is dominant which does not easily undergo oxidation to form NiO. The NiO phase increases with increasing annealing temperature. FTIR spectroscopy revealed an increase in the NiO phase content at higher annealing temperature, which is in agreement with the XRD analysis. SEM images showed that nanoparticles are well separated at lower annealing temperatures but get agglomerated at higher annealing temperatures. The ferromagnetic (FM) Ni phase content and saturation magnetization (M{sub s}) showed nearly the same trend with increasing annealing temperature. The nanoparticles annealed at 500 °C and 800 °C revealed highest and lowest M{sub s} values, respectively, which is in accordance with the XRD phase diagram. Coercivity showed an overall decreasing trend with increasing annealing temperature due to decreased concentration of FM Ni phase and increasing average crystallite size. All these measurements indicate that the structural and magnetic properties of Ni/NiO nanoparticles are strongly influenced by the annealing temperature. - Highlights: • Air annealing effects on structural and magnetic properties of Ni/NiO nanoparticles have been studied. • The XRD spectra revealed two phases such as Ni and NiO. • A phase diagram was developed between two phases versus annealing temperature using XRD analysis. • The magnetic properties are well governed by ferromagnetic Ni phase.

  13. A threonine stabilizes the NiC and NiR catalytic intermediates of [NiFe]-hydrogenase.

    Science.gov (United States)

    Abou-Hamdan, Abbas; Ceccaldi, Pierre; Lebrette, Hugo; Gutiérrez-Sanz, Oscar; Richaud, Pierre; Cournac, Laurent; Guigliarelli, Bruno; De Lacey, Antonio L; Léger, Christophe; Volbeda, Anne; Burlat, Bénédicte; Dementin, Sébastien

    2015-03-27

    The heterodimeric [NiFe] hydrogenase from Desulfovibrio fructosovorans catalyzes the reversible oxidation of H2 into protons and electrons. The catalytic intermediates have been attributed to forms of the active site (NiSI, NiR, and NiC) detected using spectroscopic methods under potentiometric but non-catalytic conditions. Here, we produced variants by replacing the conserved Thr-18 residue in the small subunit with Ser, Val, Gln, Gly, or Asp, and we analyzed the effects of these mutations on the kinetic (H2 oxidation, H2 production, and H/D exchange), spectroscopic (IR, EPR), and structural properties of the enzyme. The mutations disrupt the H-bond network in the crystals and have a strong effect on H2 oxidation and H2 production turnover rates. However, the absence of correlation between activity and rate of H/D exchange in the series of variants suggests that the alcoholic group of Thr-18 is not necessarily a proton relay. Instead, the correlation between H2 oxidation and production activity and the detection of the NiC species in reduced samples confirms that NiC is a catalytic intermediate and suggests that Thr-18 is important to stabilize the local protein structure of the active site ensuring fast NiSI-NiC-NiR interconversions during H2 oxidation/production. © 2015 by The American Society for Biochemistry and Molecular Biology, Inc.

  14. Microstructural investigations of Ni and Ni2Al3 coatings exposed in biomass power plants

    DEFF Research Database (Denmark)

    Wu, D. L.; Dahl, K. V.; Christiansen, T. L.

    2017-01-01

    temperature pack cementation. After exposure, microstructural investigations were performed by light optical and electron microscopy (SEM-EDS). Electroplated Ni coatings were not protective in straw firing power plants and exhibited similar corrosion morphology as uncoated tubes. For Ni2Al3 coatings......The present work investigates the corrosion resistance of Ni and Ni2Al3 coated austenitic stainless steel (TP347H) tubes, which were exposed in a biomass-fired boiler with an outlet steam temperature of 540 °C for 6757 h. The Ni2Al3 coating was produced by electroplating Ni followed by low......, the nickel aluminide layer was no longer adherent to the tube and was only found within the deposit. However, Ni2Al3 coatings had provided some protection compared to uncoated and Ni coated tubes. The formation of nickel chloride binds aggressive chlorine and slows down the active oxidation mechanism...

  15. Adherencia al tratamiento en niñas y niños con VIH

    OpenAIRE

    Ana María Ruiz Navia; Sandra Liliana Enríquez Lara; Paula Andrea Hoyos Hernández

    2009-01-01

    Este artículo describe y determina el grado de adherencia al tratamiento en niños y niñas con VIH/ SIDA teniendo en cuenta los comportamientos y las variables asociadas a ésta. La muestra estuvo conformada por 1 niño y 5 niñas, diagnosticados con VIH, y su respectivo cuidador primario, quienes respondieron a la entrevista semiestructurada de evaluación de adherencia para niños y niñas con VIH/ SIDA ad hoc y a la entrevista semiestructurada de evaluación de adherencia para niños y niñas con VI...

  16. The Ni-Al-Hf Multiphase Diffusion

    Directory of Open Access Journals (Sweden)

    Romanowska J.

    2016-06-01

    Full Text Available The generalized Darken method was applied to simulate the diffusion between γ-Ni| γ’-Ni3Al and γ’-Ni3Al|β-NiAl interfaces. The results of calculations were compared with the experimental concentration’s profiles of nickel, aluminum and hafnium in aluminide and hafnium doped aluminide coatings deposited by the CVD and PVD methods on pure nickel. The method deals with the Wagner’s integral diffusion coefficients and thermodynamic data - activities of components. The experimental results agree with the simulated ones.

  17. Laser welding of NiTi wires

    Energy Technology Data Exchange (ETDEWEB)

    Gugel, H. [Institute for Materials, Materials Technology, Ruhr-University Bochum, Bochum (Germany)], E-mail: hajo.gugel@rub.de; Schuermann, A.; Theisen, W. [Institute for Materials, Materials Technology, Ruhr-University Bochum, Bochum (Germany)

    2008-05-25

    The special properties of nickel-titanium shape memory alloys are currently used in micro-engineering and medical technology. In order to integrate NiTi components into existing parts and modules, they often need to be joined to other materials. For this reason, the present contribution deals with the laser welding of thin pseudoelastic NiTi wires (100 {mu}m) with an Nd:YAG laser. Based on extensive parameter studies, faultless joints were produced. This study deals with the structural changes occurring in the fusion and heat-affected zones, the performance of the joints in static tensile tests and their functional fatigue. It can be shown that NiTi/NiTi joints reach about 75% of the ultimate tensile strength of pure NiTi wires. For welding NiTi to steel, no interlayer was used. The dissimilar NiTi/steel joints provide a bonding strength in the fusion and heat-affected zones higher than the plateau stress level. NiTi/steel joints of thin wires, as a new aspect, enable the possibility to benefit from the pseudoelastic properties of the NiTi component.

  18. Effects of Ni vacancy, Ni antisite, Cr and Pt on the third-order elastic constants and mechanical properties of NiAl

    KAUST Repository

    Wu, Shaohua

    2014-12-01

    Effects of Ni vacancy, Ni antisite in Al sublattice, Cr in Al sublattice, Pt in Ni sublattice on the second-order elastic constants (SOECs) and third-order elastic constants (TOECs) of the B2 NiAl have been investigated using the first-principles methods. Lattice constant and the SOECs of NiAl are in good agreement with the previous results. The brittle/ductile transition map based on Pugh ratio G/B and Cauchy pressure Pc shows that Ni antisite, Cr, Pt and pressure can improve the ductility of NiAl, respectively. Ni vacancy and lower pressure can enhance the Vickers hardness Hv of NiAl. The density of states (DOS) and the charge density difference are also used to analysis the effects of vacancy, Ni antisite, Cr and Pt on the mechanical properties of NiAl, and the results are in consistent with the transition map. © 2014 Elsevier Ltd. All rights reserved.

  19. Continuum mechanics simulations of NiO/Ni-YSZ composites during reduction and re-oxidation

    DEFF Research Database (Denmark)

    Pihlatie, Mikko; Frandsen, Henrik Lund; Kaiser, Andreas

    2010-01-01

    expansion, diffusional creep, grain boundary sliding (GBS) and microcracking due to excessive stress. In the Ni/NiO phase, nonelastic strains in terms of diffusional and power law creep were implemented, and additionally for NiO deformation due to microcracking and/or pseudoplasticity. Semi...

  20. Preparation and characterization of Cu(111)-Ni and Cu(110)-Ni surface alloys

    NARCIS (Netherlands)

    Geus, John W.; Mesters, C.M.A.M.; Wermer, G.; Gijzeman, O.L.J.

    1984-01-01

    The interaction of Ni(CO)4/CO gas mixtures with Cu(111) and Cu(110) single crystal surfaces has been studied with ellipsometry. Auger electron spectroscopy, LEED and argon ion depth profiling. At room temperature Ni atoms with some CO ligands remain at the surface. The amount of Ni that can be

  1. Contexto Familiar: Diferencias Conductuales entre Niños y Niñas

    Directory of Open Access Journals (Sweden)

    María Aurelia Ramírez Castillo

    2005-01-01

    Full Text Available En este trabajo se investigan las diferencias por género en problemas de conducta. En una muestra de 200 sujetos (niños y niñas en tre 5 y 18 años de Granada (España, los resultados concluyen que los niños tienen más problemas de conducta delictiva que las niñas. Cuando existen conflictos matrimoniales y prácticas de crianza negativas, de nuevo los niños tienen más problemas externos que las niñas. En este trabajo se investigan las diferencias por género en problemas de conducta. En una muestra de 200 sujetos (niños y niñas en tre 5 y 18 años de Granada (España, los resultados concluyen que los niños tienen más problemas de conducta delictiva que las niñas. Cuando existen conflictos matrimoniales y prácticas de crianza negativas, de nuevo los niños tienen más problemas externos que las niñas.

  2. Structure-activity relations for Ni-containing zeolites during NO reduction. II. Role of the chemical state of Ni

    NARCIS (Netherlands)

    Mosqueda Jimenez, B.I.; Jentys, A.; Seshan, Kulathuiyer; Lercher, J.A.

    2003-01-01

    The influence of the metal in Ni-containing zeolites used as catalysts for the reduction of NO with propane and propene was studied. In the fresh catalysts, Ni is located in ion exchange positions for Ni/MOR, Ni/ZSM-5, and Ni/MCM-22. The formation of carbonaceous deposits, the removal of Al from

  3. Morphological control of Ni/NiO core/shell nanoparticles and production of hollow NiO nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Chopra, Nitin [University of Alabama, Department of Metallurgical and Materials Engineering, Center for Materials for Information Technology (MINT) (United States); Claypoole, Leslie [Fairmont State University (United States); Bachas, Leonidas G., E-mail: bachas@uky.ed [University of Kentucky, Department of Chemistry (United States)

    2010-10-15

    Chemical synthesis coupled with a microwave irradiation process allowed for the control of size (6-40 nm), shape, and shell thickness of Ni/NiO core/shell nanoparticles. In this unique synthetic route, the size of Ni nanoparticles (NiNPs) was strongly influenced by the nickel salt-to-stabilizer ratio and the amount of the stabilizer. Interestingly, it was observed that the shape of the nanoparticles was altered by varying the reaction time, where longer reaction times resulted in annealing effects and rupture of the stabilizer micelle leading to distinct shapes of Ni/NiO core/shell nanostructures. Product cooling rate was another important parameter identified in this study that not only affected the shape, but also the crystal structure of the core/shell nanoparticles. In addition, a simple and cost-effective method of microwave irradiation of NiNPs led to the formation of distinctly shaped hollow NiO nanoparticles. These high surface area core/shell nanoparticles with well-controlled morphologies are important and can lead to significant advancement in the design of improved fuel cells, electrochromic display devices, and catalysis systems.

  4. .';.:NI~

    African Journals Online (AJOL)

    nag was die terugtog van die Skotte, oor die woestyn, vir myle sigbaar soos die een ou krok na die ander opgegaan het in ligte laaie. Geen wonder dat luisteraars die volgende aand oor. Zeesenradio gehoor het hoe 8 Leer verslaan is dat hulle, in hulle dolIe vaart na die Delta, besig was om hulle voertuie te verband.

  5. Thermal neutron capture γ-ray spectroscopy of59Ni and61Ni

    Science.gov (United States)

    Harder, A.; Michaelsen, S.; Lieb, K. P.; Williams, A. P.

    1993-06-01

    The γ-radiation emitted after thermal neutron capture in isotopically enriched58Ni and60Ni was measured at the ILL high flux reactor by means of Ge/NaI detectors operated in Compton suppression and pair spectrometer mode. The neutron binding energies were determined as B n (59Ni)=8999.15(23) keV and Bn(61Ni)=7820.07(20) keV; some 95% of the total γ-ray fluxes through59,61Ni were assigned. The γ-ray strength functions of the primary transitions and the level densities are discussed.

  6. Who is El Niño?

    Science.gov (United States)

    Philander, S. George

    It is a curious story, about a phenomenon we first welcomed as a blessing but now view with dismay, if not horror [Philander, 1998]. We named it El Niño for the child Jesus, provided it with relatives—La Niña and ENSO—and are devoting innumerable studies to the description and idealization of this family. These scriptures provide such a broad spectrum of historical, cultural, and scientific perspectives that there is now confusion about the identity of El Niño. Trenberth [1997] summarizes the situation as follows.The atmospheric component tied to El Niño is termed the “Southern Oscillation.” Scientists often call the phenomenon where the atmosphere and ocean collaborate ENSO, short for El Niño-Southern Oscillation. El Niño then corresponds to the warm phase of ENSO. The opposite “La Niña” (“the girl” in Spanish) phase consists of a basinwide cooling of the tropical Pacific and thus the cold phase of ENSO. However, for the public, the term for the whole phenomenon is “El Niño.”

  7. nière's Disease

    Science.gov (United States)

    ... disease. Why do people get Ménière’s disease? Many theories exist about what happens to cause Ménière’s disease, ... changes. Some people claim that caffeine, chocolate, and alcohol make their symptoms worse and either avoid or ...

  8. Capture of Hydrogen Using ZrNi

    Science.gov (United States)

    Patton, Lisa; Wales, Joshua; Lynch, David; Parrish, Clyde

    2005-01-01

    Water, as ice, is thought to reside in craters at the lunar poles along with CH4 and H2 . A proposed robotic mission for 2012 will utilize metal/metal hydrides for H2 recovery. Specifications are 99% capture of H2 initially at 5 bar and 100C (or greater), and degassing completely at 300C. Of 47-systems examined using the van't Hoff equation, 4 systems, Mg/MgH2, Mg2Ni/Mg2NiH4, ZrNi/ZrNiH2.8, and Pd/PdH0.77, were considered likely candidates for further examination. It is essential, when selecting a system, to also examine questions regarding activation, kinetics, cyclic stability, and gas impurity effects. After considering those issues, ZrN1 was selected as the most promising candidate, as it is easily activated and rapidly forms ZrNiH 2.8 . In addition, it resists oxide poisoning by CO2, and H2O, while some oxidation by O2 is recommended for improved activation . The presence of hydrogen in the as received Zr-Ni alloy from Alfa Aesar posed additional technical problems. X-ray diffraction of the Zr-Ni powder (-325 mesh), with a Zr:Ni wt% ratio of 70:30, was found to consist of ZrH2, ZrNiH2.8, and ZrNi. ZrH2 in the alloy presented the risk that after degassing that both Zr and ZrNi would be present, and thus lead to erroneous results regarding the reactivity of ZrNi with H2 . Fortunately, ZrH2 is a highly stable hydride that does not degas H2 to any significant extent at temperatures below 300C. Based on equilibrium calculations for the decomposition of ZrH2, only 1 millionth of the hydride decomposed at 300C under a N2 atmosphere flowing at 25 ccm for 64 hours, the longest time for pretreatment employed in the investigation. It was possible, from the X-ray results and knowledge of the Zr:Ni ratio, to compute the composition of a pretreated specimen as being 76 wt% ZrNi and the balance ZrH2.

  9. Water dissociation on Ni(100), Ni(110), and Ni(111) surfaces: Reaction path approach to mode selectivity.

    Science.gov (United States)

    Seenivasan, H; Jackson, Bret; Tiwari, Ashwani K

    2017-02-21

    A comparative study of mode-selectivity of water dissociation on Ni(100), Ni(110), and Ni(111) surfaces is performed at the same level of theory using a fully quantum approach based on the reaction path Hamiltonian. Calculations show that the barrier to water dissociation on the Ni(110) surface is significantly lower compared to its close-packed counterparts. Transition states for this reaction on all three surfaces involve the elongation of one of the O-H bonds. A significant decrease in the symmetric stretching and bending mode frequencies near the transition state is observed in all three cases and in the vibrational adiabatic approximation, excitation of these softened modes results in a significant enhancement in reactivity. Inclusion of non-adiabatic couplings between modes results in the asymmetric stretching mode showing a similar enhancement of reactivity as the symmetric stretching mode. Dissociation probabilities calculated at a surface temperature of 300 K showed higher reactivity at lower collision energies compared to that of the static surface case, underlining the importance of lattice motion in enhancing reactivity. Mode selective behavior is similar on all the surfaces. Molecules with one-quantum of vibrational excitation in the symmetric stretch, at lower energies (up to ∼0.45 eV), are more reactive on Ni(110) than the Ni(100) and Ni(111) surfaces. However, the dissociation probabilities approach saturation on all the surfaces at higher incident energy values. Overall, Ni(110) is found to be highly reactive toward water dissociation among the low-index nickel surfaces owing to a low reaction barrier resulting from the openness and corrugation of the surface. These results show that the mode-selective behavior does not vary with different crystal facets of Ni qualitatively, but there is a significant quantitative effect.

  10. The Ni-YSZ interface

    DEFF Research Database (Denmark)

    Jensen, Karin Vels

    the samples with impure nickel electrodes showed an initial increase toward a high constant polarisation resistance, whereas the samples with pure nickel electrodes showed a considerable decrease to a low constant polarisation resistance with time. For both types of nickel the polarisation resistance dropped......The anode/electrolyte interface in solid oxide fuel cells (SOFC) is known to cause electrical losses. Geometrically simple Ni/yttria-stabilised zirconia (YSZ) interfaces were examined to gain information on the structural and chemical changes occurring during experiments at 1000°C in an atmosphere...... of 97% H2/3% H2O. Electrochemical impedance spectroscopy at open circuit voltage (OCV) and at anodic and cathodic polarisations (100 mV) was performed. A correlation of the electrical data with the structure development and the chemical composition was attempted. Nickel wires with different impurity...

  11. Niño maltratado

    Directory of Open Access Journals (Sweden)

    Ana Ivis Crespo Barrios

    1996-12-01

    Full Text Available Se presentan 200 niños maltratados que acuden al Hospital Pediátrico Docente "Juan Manuel Márquez" en el período comprendido de diciembre de 1990 a enero de 1992; éstos fueron seleccionados teniendo en cuenta los criterios de maltrato, y era el objetivo fundamental del estudio conocer cómo se comporta en nuestro medio. En los resultados se muestra que la forma más frecuente fue el tipo no intencional; la ingestión de tóxicos fue la forma de negligencia física más frecuente dentro del maltrato no intencional, ésta es más usual en los niños menores de 5 años; los trastornos psiquiátricos y el alcoholismo son favorecedores del maltrato intencional, la madre es la que más maltrata; la mortalidad por esta causa no fue elevada (5 fallecidos y los criterios de riesgo de maltrato tienen utilidad para su identificación.200 mistreated children who were seen at the "Juan Manual Márquez" Pediatric Teaching Hospital from December, 1990 to January, 1992, are presented. These patients were selected taking into consideration the abuse criteria. The main objective of this paper was to know how these criteria behave in our enviroment. According to the results, the most common form was the non-intentional type. The ingestion of toxic agents was the most frequent form of physical neglect within the non-intentional mistreatment, and it is the most usual among children under 5. Psychiatric disorders and alcoholism favor the intentional mistreatment, and the mother mistreats the most. Mortality due to this cause was not high (5 deaths, and the abuse risk criteria are useful for its identification.

  12. Nonenzymatic Glucose Sensor Based on In Situ Reduction of Ni/NiO-Graphene Nanocomposite

    Directory of Open Access Journals (Sweden)

    Xiaohui Zhang

    2016-10-01

    Full Text Available Ni/NiO nanoflower modified reduced graphene oxide (rGO nanocomposite (Ni/NiO-rGO was introduced to screen printed electrode (SPE for the construction of a nonenzymatic electrochemical glucose biosensor. The Ni/NiO-rGO nanocomposite was synthesized by an in situ reduction process. Graphene oxide (GO hybrid Nafion sheets first chemical adsorbed Ni ions and assembled on the SPE. Subsequently, GO and Ni ions were reduced by hydrazine hydrate. The electrochemical properties of such a Ni/NiO-rGO modified SPE were carefully investigated. It showed a high activity for electrocatalytic oxidation of glucose in alkaline medium. The proposed nonenzymatic sensor can be utilized for quantification of glucose with a wide linear range from 29.9 μM to 6.44 mM (R = 0.9937 with a low detection limit of 1.8 μM (S/N = 3 and a high sensitivity of 1997 μA/mM∙cm−2. It also exhibited good reproducibility as well as high selectivity.

  13. Asymmetry of inter-El Niño and -La Niña diversity

    Science.gov (United States)

    Kim, S.; Kug, J. S.

    2016-12-01

    Over the North Pacific, there is a distinctive asymmetry of inter-El Niño and -La Niña diversity in atmospheric teleconnection patterns, indicating a strong diversity during La Niña events. Recent studies suggested that the typical patterns of the extratopical teleconnections associated with El Niño-Southern Oscillation (ENSO) are predominantly explained by the relative roles of the equatorial central Pacific (CP) and western North Pacific (WNP) precipitation anomalies. We find that the diversity of WNP precipitation anomalies is greater during La Niña events than during El Niño events. It also implies that the diversity of WNP precipitation anomalies during La Niña events is responsible for the diversity in the extratropical teleconnection. Since the relationship of anomalous sea surface temperature (SST) to precipitation is quite sensitive for SST in the range of 27-28°C, the WNP precipitation differences located over the warm pool among La Niña events lead to considerable teleconnection changes. In addition, we find here that the CMIP5 models well simulate the overall diversity in the tropical precipitation and extratropical teleconnection patterns during La Niña events, but it fails to reproduce a detailed pattern difference of atmospheric teleconnection in inter-La Niña events.

  14. Engineering NiS/Ni2P Heterostructures for Efficient Electrocatalytic Water Splitting.

    Science.gov (United States)

    Xiao, Xin; Huang, Dekang; Fu, Yongqing; Wen, Ming; Jiang, Xingxing; Lv, Xiaowei; Li, Man; Gao, Lin; Liu, Shuangshuang; Wang, Mingkui; Zhao, Chuan; Shen, Yan

    2018-01-23

    Developing high-active and low-cost bifunctional materials for catalyzing the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) holds a pivotal role in water splitting. Therefore, we present a new strategy to form NiS/Ni2P heterostructures. The as-obtained NiS/Ni2P/carbon cloth (CC) requires overpotentials of 111 mV for the HER and 265 mV for the OER to reach a current density of 20 mA cm-2, outperforming their counterparts such as NiS and Ni2P under the same conditions. Additionally, the NiS/Ni2P/CC electrode requires a 1.67 V cell voltage to deliver 10 mA cm-2 in a two-electrode electrolysis system, which is comparable to the cell using the benchmark Pt/C||RuO2 electrode. Detailed characterizations reveal that strong electronic interactions between NiS and Ni2P, abundant active sites, and smaller charge-transfer resistance contribute to the improved HER and OER activity.

  15. Study of the central collisions in the reactions Ni + Al and Ni + Ni at 28 A.MeV; Etude des collisions centrales dans les reactions Ni + Al et Ni + Ni a 28 A.MeV

    Energy Technology Data Exchange (ETDEWEB)

    Lebreton, L.

    1995-12-01

    The work is in characterisation of mechanisms in the energy range of onset of multifragmentation (excitation energy of composed nucleus around 4 - 5 AMeV). This work focused on an experiment performed at the SARA facility, in Grenoble, using the AMPHORA multi detection array. I have been particularly interested in central collisions in the Ni + Al and Ni + Ni systems. The possibility to detect complete events for Ni + Al, and quasi-complete events for the Ni + Ni case, is the reason of this choice. Furthermore Ni + Ni presents the interest of a symmetrical system, for which the excitation energy per nucleon is maximum. The study of these reactions has been focused on the quasi-complete events (events for which at least 80 % of the total charge has been detected). Heavy ions produced in peripheral collisions are very likely emitted along the beam line or stopped in the plastic detectors, energy thresholds are too high for the quasi-target products detection, consequently by requiring complete or quasi-complete measurement of the total charge, we are able to detect mostly central events. The knowledge of informations like charge, energy or detection angles allows to isolate the source(s) and to reconstruct the size and the excitation energy of the source(s). Comparisons with simulations like sequential emission (GEMINI code), very deep inelastic collision or instantaneous emission (Berliner code) allows to characterise the first stage of the collision (binary collisions or central collisions) and the type of deexcitation of the source(s). Some calculations was also performed with the statistical model code MODGAN. Indeed azimuthal correlations seem to be a good tool in getting more information about involved reaction mechanisms. Comparisons with MODGAN provide information about angular momentum of the source and time delay between emissions of the two particles (separation between sequential or instantaneous process). (author). 69 refs.

  16. Study of thermal threshold and counter-measures for human body in oceanic working environment. 1st Report. Heat balance model and heat storage index; Shonetsu kankyoka no kaiyo sagyo ni okeru netsuteki genkai to onnetsu taisaku ni kansuru kenkyu. 1. Netsu shushi model to onnetsu shisu

    Energy Technology Data Exchange (ETDEWEB)

    Fukuchi, N. [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Nakamura, M. [Tokyo Gakugei University, Tokyo (Japan); Murayama, M.

    1996-12-31

    Identification was intended on effects of such thermal factors as metabolic amount, environmental temperature and humidity, and clothing resistance on human body temperatures during works under hot environments. Therefore, measurements were carried out on human skin temperatures, rectum temperatures and humidity inside clothing, while amount of motion, environmental temperature, and clothing are changed in a constant temperature room and under a sun irradiation environment. Furthermore, a heat balance model was prepared, which divides the objects into an outer shell layer whose temperature changes depending on the result of this experiment and into a core having constant temperature characteristics. An equation to derive skin temperatures was introduced from the model. The equation formulated a calculation formula for heat accumulation in human body, which can be used as a hot heat index. Relationship between thermal factors and heat storage amount was investigated to consider a thermal limit for a physical work. An equation to derive skin temperatures was confirmed capable of expressing general change in skin temperatures, being proved by comparison with experiments. Calculation formulas for amount of heat stored in human body were shown capable of expressing influence of different thermal factors, the expression being useful as a hot heat index. Calculating the human body heat storage is very largely affected by effect of sweat to dissipate heat, hence it is necessary to improve the accuracy including that for body temperature adjusting reactions. 17 refs., 17 figs., 5 tabs.

  17. Aerodynamic stability study of a long-span prestressed concrete cable-stayed bridge. Aerodynamic behavior of edge box girder under uniform flow; Chodai PC shachokyo no taifu anteisei ni kansuru kenkyu. Ichiyoryuchu ni okeru edge girder keishiki no kuriki tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Nomura, T. [Obayashi Corp., Tokyo (Japan)

    1999-01-10

    In recent years, the construction of long-span bridges is on the increase. Prestressed concrete cable-stayed bridges are dynamically very efficient structures of relatively low cost that blend in well with the landscape. Maintenance is also easy. Consequently, the adoption of edge box girders for cable-stayed bridges is increasing worldwide, but problems related to the aerodynamic stability of the structure have emerged. The aerodynamic stability of edge box girders for a prestressed concrete cable-stayed bridge was investigated under uniform flow conditions by conducting several wind tunnel experiments. As a result, the section of the bridge deck was optimized to prevent torsional flutter within an angle of attack varying from -5 to +5 degrees. It is therefore possible to guarantee the aerodynamic stability of long-span prestressed concrete cable-stayed bridges. (author)

  18. Survey report for fiscal 1997 on the survey report on the actual state of technical cooperation on industrial technologies by European countries in the South-eastern Asian region; 1997 nendo Tonan Asia chiiki ni okeru Obei shokoku no sangyo gijutsu ni kansuru gijutsu kyoryoku jittai chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The actual state was surveyed on the technical cooperation by European countries in the South-eastern Asian region. The U.S.A. is making research cooperation with Thailand on ethylene molecule structures to enhance productivity in rubber production, France on molecule markers for high production rubber clone selection, and Australia on grain storing and drying methods. For the Philippines, America is giving assistance on management of reproducible resources, France on climate information communications systems for local areas, Australia on grain storing and drying methods, and Germany on waste oil recovery and reutilization, and development of pollution-free energy resources. For Malaysia, the Great Britain is cooperating on building engineering research centers, Australia on search for plant patheology genetic organics available in the Pacific region, and Germany on investigative researches on pollution prevention for tin mines and processing areas, and forestry and plant information systems. With respect to the ASEAN, this paper reports its activities placing importance on biology and electronics engineering, while the organization is taking actions in the areas of foodstuffs, animals, electronics, information and material science, energy exploration, marine and earth physics, and resource development. (NEDO)

  19. Development of [l brace]100[r brace] texture in silicon steel sheets by isothermal austenite[yields]ferrite transformations and its mechanism. Keiso kohan ni okeru toon [gamma][yields][alpha] hentai ni yoru [l brace]100[r brace] shugo soshiki no keisei to sono kiko

    Energy Technology Data Exchange (ETDEWEB)

    Tomida, T. (Sumitomo Metal Industries Ltd., Osaka (Japan). Advanced Technology Research Lab.); Tanaka, T. (Sumitomo Metal Industries Ltd., Osaka (Japan). Iron and Steel Research Lab.)

    1993-12-01

    The texture in silicon steel sheets has been studied during this half of century and the methods for forming the textures suitable as the soft-magnetic materials of [l brace]110[r brace][l angle]001[r angle] as well as [l brace]100[r brace][l angle]001[r angle] have been found. However, few researches has been carried out on the silicon steel using positively the innate properties of the steel such as the transformation between the austenite ([gamma]) and [alpha]-ferrite and the recrystallization in the coexisting area of [alpha]/[gamma] duplex. In this study, the isothermal [alpha][yields][gamma] transformation during the process of vacuum-annealing and decarburizing-annealing of 2% silicon steel containing carbon and Mn and the texture formation accompanied therewith are examined. The conclusions are as follows. The isothermal [alpha][yields][gamma] transformation occurs in the layer just below the surface and the structure of the surface becomes the single phase of [alpha]-ferrite in the vacuum of 10[sup -3]Pa and the temperature is kept constant within the range of [alpha]/[gamma] duplex temperature or [gamma]-phase temperature as from 850 to 1050 centigrade. This surface structure develops to the strong [l brace]100[r brace] texture. 12 refs., 8 figs., 2 tabs.

  20. Fiscal 1995 survey report on the feasibility study of the environmentally friendly type coal utilization system. Survey on the environmentally friendly type coal utilization system in the coal preparation sector in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sentan bumon ni okeru kankyo chowagata sekitan riyo system ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    Specifying the coal preparation technology among clean coal technologies (CCT) in China, the paper investigated governmental policies, plans, standards of coal preparation technology, subjects, etc. toward the introduction/spread of coal preparation technology, and studied decision, introduction and spread of the coal preparation system suitable for the coal utilization status in China. The survey was conducted in Shanxi and Henan Provinces which are main provinces of coal production, and field survey was made at some selected coal preparation plants having different operational conditions. In the field survey, problems on the operation were extracted, and points of improvement were studied at the same time. Further, to grasp the positioning of coal preparation in CCT in China, survey was carried out on laws and regulation on coal preparation in terms of energy and environmental policies. Finally, the result of the field survey was analyzed, a coal preparation system of which the introduction/spread in medium- and long-term are enabled was proposed considering the coal utilization status and economic situation in China, and how to introduce/spread it was studied. 35 figs., 42 tabs.

  1. Development of technologies to prevent fish diseases by vaccination. 1. Adaptation of an ELISA to detect serum antibody and the effect of the vaccination for Japanese flounder; Wakuchin ni yoru gyobyo yobo gijutsu no kaihatsu. 1. Hirame ni okeru erizaho no tekiyo to wakuchin toyo no yukosei

    Energy Technology Data Exchange (ETDEWEB)

    Furuta, T.; Honda, H.; Kikuchi, K.; Iwata, N.; Kiyono, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1994-07-01

    An examination was carried out on the adaptation of an ELISA for flounder and on the preparation and effect of a protective vaccination against edwardsiellosis. The measurement of flounder antibody by ELISA was made possible by successively making a rabbit antibody and an enzyme tagged goat antibody react to the flounder antibody. By ELISA, the antibodies were able to be measured with a sensitivity 5 to 6 times higher compared with the conventional agglutination. The vaccination was prepared experimentally by producing edwardsiella tarda in aquaculture, adding formalin to inactivate it, and cleaning it with a physiological salt water. The vaccination thus prepared was administered to 4 groups of flounder consisting of those weighing 3, 17, 146 and 516g by means of injection or immersion. After that, the measurement was taken of antibody titers by ELISA, and a challenge test was performed by injecting edwardsiella tarda. A rise in antibody titers was observed in all sizes under the injection and in a part of the 516g group of flounders under the immersion. The effect of the administration was such that the increase in protective immunity was recognized under the injection but not under the immersion. 33 refs., 11 figs., 1 tab.

  2. Survey report for fiscal 1998. Survey of the current state and tasks of research and development of technologies for effectively utilizing CO{sub 2} fixation by higher vegetation; 1998 nendo chosa hokokusho. Koto shokubutsu ni okeru nisanka tanso koteika yuko riyo gijutsu no kenkyu kaihatsu no genjo to kadai ni kansuru chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Investigations and studies are conducted seeking for a CO2 fixation method improved by utilizing the photosynthesizing function of higher vegetation. Details of higher vegetation genes are being disclosed thanks to the rapid progress of studies making use of molecular biological techniques, and the application of the genetic mechanism to scientific and technological fields is becoming increasingly feasible. In particular, the role of the CO2 fixation enzyme RuBisCO has been elucidated almost completely. It has been learned that, in terms of photosynthesizing capability, the C{sub 4} plants (corn etc.) are 2-3 times higher than the C{sub 3} plants (rice, wheat, etc.), and 5-10 times higher than the CAM plants (cactuses etc.). Studies are also under way about the rice genome so that a photosynthesizing capability so high as that of the C{sub 4} plants may be endowed the rice plant. The metabolism and control of useful substances produced in the CO2 fixation process etc. in the higher vegetation are being investigated, and it is now expected that some day such useful substances will be produced and utilized efficiently. Researches are under way into the relationship between the green leaf that is the organ that performs photosynthesis and the organ (sink) that stores and utilizes starch and sugar is in progress, and now a new field is going to open where vegetables will be fully utilized. (NEDO)

  3. Estimation of underground structure using phase velocities of Love-and Rayleigh-waves from three-component microtremor array observation at Morioka city; Moriokashi ni okeru sanseibun are bido kansoku ni yoru reiri-ha rabu-ha no ryoiso sokudo wo mochiita chika kozo suitei

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Hidekazu; Saito, Tokumi; Ohashi, Hiromasa [Iwate University, Iwate (Japan)

    1999-02-01

    In conventional microtremor prospecting methods, underground structure is estimated using the phase velocity of Rayleigh-wave only. However, it is considered that the underground structure can be estimated at a higher accuracy by using two phase velocities of Rayleigh-wave and Love-wave that directly reflects S-wave velocity structure. Therefore, three-component microtremor array observation of a circle (equilateral triangle) with the maximum radius of 40 to 250 m was carried out at the center of Morioka city. Analysis was carried out by means of extended space with autocorrelation to obtain phase velocities of Love- and Rayleigh-waves. The frequency zone of the obtained Rayleigh-wave phase velocity is 1.5 Hz to 8.6 Hz, and the phase velocity is 2670 m/s to 733 m/s. The frequency zone of the obtained Love-wave phase velocity is 3 Hz to 8.6 Hz, and the phase velocity is 2100 m/s to 412 m/s. The underground structure obtained by using two observed phase velocities is clarified under a depth of 116 m. A stratum deemed to be the basement exists from a depth of 21 m (Vs=1100 m). As a result, the underground structure can be estimated at a higher accuracy if two phase velocities of Love-and Rayleigh-waves are used. (translated by NEDO)

  4. Fluctuation of the accumulation rate of aerosol in the Hess rise, North pacific, during the last 200 kyr: estimation of aerosol effect to carbon cycle; Kitataiheiyo chu ido iki no Hesu kaibo ni okeru kako 20mannen no fusojin no chinseki hendo to tanso junkan ni ataeta eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Kawahata, h. [Geological Survey of Japan, Tsukuba, Ibaraki (Japan); Matsumoto, E. [Nagoya Univ., Nagoya (Japan). Water Research Inst., Nagoya; Ito, Y. [Univ. of the Ryukyus, Okinawa (Japan). Lab. of Oceanography

    1997-05-15

    A sedimentary core recovered from the Hess Rise underlying directly below the westerly wind system in the mid-latitude of the North Pacific provides a detailed record of terrestrial and marine environments during the last 20kyr. Most of the aluminosilicate in the sediments are considered to have been transported through the atmosphere by wind. The mass accumulation rates (MARs) of aerosol quarts increased during stage 2 and middle stage 6, and showed maximal during stage 4. A little terrestrial organic substances must have been transported accompanying aerosol quarts, but most of the organic substances seem to be mostly of marine origin because Corg/N ratio of the organic substances contained in the sediments is 7.4. The phosphorus supply to the sea surface transported by aerosol quarts can be presumed to have a large latent potential to the accumulation of organic carbon. The effect of calcium carbonate supply into the sea surface by aerosol quartz on diminishing CO2 partial pressure in the surface water is found to be only less than 1{mu}atom/year. 55 refs., 6 figs.

  5. FY 1999 cooperation program - Comprehensive research cooperation in environmental technology. Research cooperation in toxic/hazardous waste management in the Laguna de Bay region; 1999 nendo kenkyu kyoryoku jigyo. Kankyo gijutsu sogo kenkyu kyoryoku - Raguna ko chiiki ni okeru yudoku yugai haikibutsu ni kansuru kenkyu kyoryoku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of establishing preventive measures for water contamination in the Laguna de Bay region, the Philippines, where the water contamination is in progress and the eutrophication is feared, a research cooperation project was carried out on the water quality contamination monitoring technology (measuring method/analysis method/prediction method). In the survey of the state of generation of toxic/hazardous waste, the following were grasped based on the existing data: amount of use of toxic/hazardous substances in factories, state of generation of waste, situation of the processing/disposal, etc. In the detailed survey of the situation of pollution in the Laguna de Bay region, specimens of water quality and bottom material were collected from the lake and rivers thereinto, and qualitative/quantitative analysis of contaminants was made using atomic absorption spectrophotometer and gaschromatograph mass spectrometer. As to the evaluation of pollutant sources and control method, the paper conducted the introduction of measures generally taken against pollutant sources, study of a method to grasp the behavior of contaminants by the environmental assessment method for the closed water area, etc. The training was also conducted for researchers/engineers widely in charge of management of toxic/hazardous waste in the Philippines. (NEDO)

  6. AC hysteresis losses near the glass-liquid transition temperature in high-T{sub c} cuprate superconductors. Handy expression for AC hysteresis loss; Sankabutsu koon chodendotai no jisoku gurasu - ekitai ten'i ondo fukin ni okeru koryu rireki sonshitsu. Koryu rireki sonshitsu ni taisuru kanbenna rironshiki

    Energy Technology Data Exchange (ETDEWEB)

    Fujiyoshi, T.; Ohashi, K.; Hiramatsu, A. [Kumamoto Univ., Kumamoto (Japan); Yamafuji, K.; Nakamura, S. [Ariake National College of Tech., Fukuoka (Japan); Kisu, T. [Kyushu Univ., Fukuoka (Japan). Graduate School of Information Science and Electrical Engineering

    2000-05-25

    The AC loss in high-T{sub c} superconductors near the glass-liquid transition temperature, T{sub g}, is studied numerically and theoretically. It is shown that the AC loss in a slab sample under a DC bias magnetic field depends noticeably on the angular frequency, {omega}, and hence, cannot be described by the usual critical state model using critical current density, J{sub c}, defined with the aid of the electric field criterion. However, the AC loss including the flux flow loss is shown to be describable quantitatively by present handy theoretical expression, which has the same form as the well-known expression based on Bean's critical state model except that J{sub c} is replaced by the effective critical current density, J{sub ce}({omega}). (author)

  7. Combustion-driven oscillation in a furnace with multispud-type gas burners. 4th Report. Effects of position of secondary air guide sleeve and openness of secondary air guide vane on combustion oscillation condition; Multispud gata gas turner ni okeru nensho shindo. 4. Nijigen kuki sleeve ichi oyobi nijigen kuki vane kaido no shindo reiki ni oyobosu eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, I.; Okiura, K.; Baba, A.; Orimoto, M. [Babcock-Hitachi K.K., Tokyo (Japan)

    1994-07-25

    Effects of the position of a secondary air guide sleeve and the openness of a secondary air guide vane on combustion oscillation conditions were studied experimentally for multispud-type gas burners. Pressure fluctuation in furnaces was analyzed with the previously reported resonance factor which was proposed as an index to represent the degree of combustion oscillation. As a result, the combustion oscillation region was largely affected by both position of a guide sleeve and openness of a guide vane. As the openness having large effect on the ratio of primary and secondary air/tertiary air and the position hardly having effect on the ratio were adjusted skillfully, the burner with no combustion oscillation region was achieved in its normal operation range. In addition, as the effect of preheating combustion air was arranged with a standard flow rate or mass flow flux of air, it was suggested the combustion oscillation region due to preheating can be described with the same manner as that due to no preheating. 5 refs., 8 figs.

  8. Effects of chelating agents as additives on preparation of Co-Mo hydrodesulfurization catalysts. Effect of NTA (Nitrilotriacetic acid) addition on hydrodesulfurization activity and surface composition; Co-Mo kei datsuryu shokubai choseiji ni okeru kiretozai no tenka koka. Datsuryu kassei to hyomen sosei ni taisuru NTA (nitoriro sansakusan) no tenka koka

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T.; Kasahara, S.; Kiyohara, T.; Kawahara, K.; Yamada, M. [Tohoku University, Sendai (Japan). Faculty of Engineering

    1995-11-01

    Co-Mo/Al2O3 catalysts prepared by an impregnation method using NTA (nitrilotriacetic acid) as a chelating agent, were used to test the hydrodesulfurization (HDS) activity of benzothiophene and to observe the effect of XPS (X-ray photoelectron spectroscopy). The NTA-added catalysts showed ca. 20% higher HDS activity than that of conventional catalysts. The result of the activity test as a function of Co/Mo ratio suggested that the same highly active sites were formed when Co/Mo ratio (atom/atom) was less than ca. 0.3, and above 0.3 less active Co species was formed. It was also suggested that NTA contributed to the formation and to increasing the number of highly alive sites. When the NTA-added catalysts were calcined before sulfidation, the increment of HDS acidity was reduced by half. XPS measurements for catalyst precursors (before sulfidation) revealed that, when they were not calcined, the Co concentration at the surface of the catalysts prepared by the NTA method was higher than that of the conventionally prepared catalysts. Accordingly, it was suggested that NTA has a role of increasing Co surface density; thus, increasing the catalytic activity. 18 refs., 7 figs., 1 tab.

  9. Effects of chelating agents as additives on preparation of Co-Mo hydrodesulfurization catalysts. Part 2. Effect of nitrilotriacetic acid addition on surface structure; Co-Mo kei datsuryushokubai choseiji ni okeru chelate zai no tenka koka. 2. Hyomen kozo ni oyobosu nitrilo san sakusan tenka no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, T.; Kiyohara, T.; Hiroshima, K.; Yamada, M. [Tohoku University, Sendai (Japan). Faculty of Engineering

    1996-03-01

    For the purpose of uncovering the cause of increased hydrodesulfurization (HDS) activity of Co-Mo/Al2O3 by the addition of nitrilotriacetic acid (NTA), the effects of order in adding NTA and the amount thereof on benzothiophene (BT) HDS activity were investigated. Effects of pretreatment condition were also studied, and it appeared that NTA did nor affect the optimum pretreatment condition. From the view of the surface structure, XPS was measured for the catalyst precursors, Mo EXAFS, FT-IR of adsorbed nitric oxide (NO), and the amount of NO adsorbed were measured for the sulfided catalysts, respectively. The XP spectra showed some concentration of Co at the surface of the catalyst precursor prepared with NTA. From the result of Mo EXAFS, it was thought that, when NTA was added during preparation, the growth of MoS2-like crystallite or the extent of crystallization was promoted. The IR spectra of NO adsorbed on sulfided catalysts showed that the adsorbed NO was mainly located on Co site. It was hence suggested that the addition of NTA promoted the coverage of Mo site with Co, and that the Co might have contributed toward the high HDS activity. The amount of NO adsorbed was found smaller for NTA-added catalyst than for the one prepared without NTA. Since the BT HDS activity was higher for NTA-added catalyst, it was thought that the addition of NTA might have promoted the formation of highly active sites. 14 refs., 7 figs., 3 tabs.

  10. Recent energy situation in the U.S. and Europe. Trend of discussions on energy safety security and energy policies in the E.U. and CIS (commonwealth of independent states) countries; Obei ni okeru saikin no energy jijo. Energy anzen hosho ni kansuru giron no doko to EU oyobi CIS shokoku no energy seisaku

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    The E.U. intends to establish the stabilized new partnership and economic area, based on free trades and tighter economic cooperation with Mediterranean countries. For the purpose of establishing the effective cooperative relationship in the energy field, the E.U. committee taking the short- and medium-term initiative prepares as follows: The establishment of the European/Mediterranean Energy Forum is thought of. This is for the joint management of cooperation in the energy field and the organization of the conferences and meetings of information exchanges between partners. The discussion is started for the final joining in the organization of partners of Mediterranean countries who do not participate in the Pan-European Energy Charter conference. They study options adoptable for easing investments. They cooperate with the related countries for carrying out the project having common interest in the TENs (Trans-European energy networks) field. The working-out of plans and projects is promoted for coordinating energy projects according to the purposes and procedures of MEDA. 59 refs.

  11. Study on solidification of carbon dioxide by using cold energy of LNG. 2nd Report. Solidification characteristics of CO2 around gas feed nozzle; LNG no reinetsu wo riyoshita tansan gas no koka ni kansuru kiso kenkyu. 2. Gas fukikomi nozzle shuhen ni okeru CO2 koka tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Takeuchi, Y.; Hironaka, S. [Mitsubishi Heavy Industries, Ltd., Tokyo (Japan); Shimada, Y.; Tokumasa, K. [Chugoku Electric Power Co. Inc., Hiroshima (Japan)

    1998-08-25

    The present paper deals with solidification characteristics of carbon dioxide around gas feed nozzle of the flue gas from thermal energy power plant. The present experiment was carried out under condition of dioxide content for 3-50 volume percents. The results obtained indicated that the solidification fraction of carbon dioxide increased with a decrease in cooling temperature. The solidification fraction of carbon dioxide was expressed as the function of non-dimensional tempera true and concentration of carbon dioxide. 6 refs., 15 figs.

  12. Characteristics of combustion and heat transfer of excess enthalpy flames stabilized in a stagnation flow. 2nd Report. ; Heat flux at high flow rate and effects of Lewis number. Yodomi nagarechu ni anteika sareta choka enthalpy kaen no nensho oyobi etsudentatsu tokusei. 2. ; Koryuryo ni okeru netsuryusoku oyobi Lewis su no koka

    Energy Technology Data Exchange (ETDEWEB)

    Ito, S. (Daido Institute of Technology, Nagoya (Japan)); Asato, K.; Kawamura, T. (Gifu University, Gifu (Japan). Faculty of Engineerirng); Mazaki, T. (Daido Senior High School, Nagoya (Japan)); Umemura, H. (Mitsubishi Electric Corp., Tokyo (Japan))

    1993-08-25

    For the purpose of developing small-sized combustors of high heat transfer efficiency for household and business uses, a study has been carried out on the characteristics of an excess enthalpy flame stabilized in a stagnant flow, the maximum heat flux utilizable from flames through a heat receiver wall, the heat transfer characteristics near the extinction limits, and the effects of Lewis number (Le). Even when heat is drawn from the heat receiver wall in the downstream of flames, stable flames are kept until they extremely approach the heat receiver wall by the effect of preheating for lean methane-air flames of Le[approx equal]1.0 and lean propane-air flames of Le>1.0 and by the effect of preheating and Lewis effect for lean hydrogen-air flames of Le<1.0. In any flames, therefore, the heat flux to the heat receiver wall increases abruptly with the increase of stagnant velocity gradient and thereby the heat transfer characteristics at the heat receiver wall are improved. Heat transfer in the cases where flames exist on the outside and inside of the temperature boundary layer depend not on the thickness of the temperature boundary layer but on the position of flames. 6 refs., 9 figs.

  13. Evaluation of deformation and subsidence of improved ground by sand drain associated with reclamation. Properties of landfill ground during site construction works ad Tachibana Bay Coal-fired Power Station and their measurement results; Umetate ni tomonau sand drain kairyo jiban no henkei chinka hyoka. Tachibanawan hatsudensho shikichi zosei koji ni okeru umetate jiban no bussei to keisoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Suesawa, H.; Iwahara, H.; Nakahiro, M. [Shikoku Electric Power Co., Inc., Kagawa (Japan)

    1998-01-05

    This paper describes properties of landfill ground during site construction works at Tachibana Bay Coal-fired Power Station. Measurement results of displacement and subsidence of the ground are also illustrated. For the reclamation works, three-stage landfill was conducted after the placement of sand drain. The displacement and subsidence were measured. Compaction subsidence was sufficiently accelerated without large displacement or sliding of soft soil marine sediments. Stable landfill ground with a small residual subsidence could be constructed. Since the residual subsidence of consolidated ground was small, negative friction could be neglected for the design of foundation piles. Foundation cost for structures on the constructed ground could be reduced. For the soft soil ground improved by sand drain, the total cost for accelerated compaction subsidence and consolidation for structures in the stage of design can be reduced by accurately evaluating the compaction subsidence with landfill and the residual subsidence after landfill. 9 refs., 19 figs., 5 tabs.

  14. Stability of earth dredged from the sea bed to be spread on the ground. From experiences of large-sized earth disposal site constructing works at power plant on the Bay of Tachibana; Kaitei shunsetsudo no takamoritsuchi shori ni okeru anteisei ni tsuite. Tachibanawan hatsudensho daikibo tsuchisuteba koji no keiken kara

    Energy Technology Data Exchange (ETDEWEB)

    Suesawa, H.; Okada, H.; Tachikawa, T. [Shikoku Electric Power Co., Inc., Kagawa (Japan)

    1998-03-05

    The earth disposal site construction works for a power plant on the Bay of Tachibana were to spread earth on the ground to a height of around 50m. Of a total quantity of earth (around 2.2 million m{sup 3}) spread, around 1.2 million m{sup 3} of the earth is slurried, dredged from the sea bed and solidified with a solidification agent. It is reported that the solidified earth, an artificially cementation-treated slurry, shows mechanical behavior apparently similar to that associated with an excessively compacted slurry. When the solidified earth showing such characteristics is spread on the ground, it is necessary to investigate its mechanical characteristics, and to confirm its stability from various aspects, including stress/strain of the spread earth. In the design stage, the simultaneous FEM analysis was done for the relationship between stress/strain and permeating flow using an elastoviscous plastic model that represents the mechanical characteristics of the solidified earth, to predict horizontal displacement and sink. At the same time, they were actually measured as height of the spread earth increased, to assess and investigate stability of the earth. 5 refs., 18 figs., 2 tabs.

  15. Ääniä tiloissa

    OpenAIRE

    Rehn, Nicolas

    2014-01-01

    Opinnäytetyössäni esittelen keväällä 2013 Pop & Jazz Konservatorion lounasravintolan WC:ssä toteuttamani liveinstallaation Ääniä tiloissa. Analysoin teokseni kautta taiteen ja musiikin tekemisen motiiveja ja symboliikkaa, sekä tilan funktiota paikkana jossa toteuttaa musiikkia ja taidetta. Tavoitteenani opinnäytetyössäni oli toteuttaa performatiivinen esitys joka on vahvasti sidoksissa tiettyyn paikkaan, tilaan ja aikaan, ja jonka äänimateriaali saa muotonsa tässä nimenomaisessa tilassa ...

  16. Ni{sub 3}Al aluminide alloys

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.T.

    1993-10-01

    This paper provides a brief review of the recent progress in research and development of Ni{sub 3}Al and its alloys. Emphasis has been placed on understanding low ductility and brittle fracture of Ni{sub 3}Al alloys at ambient and elevated temperatures. Recent studies have resulted in identifying both intrinsic and extrinsic factors governing the fracture behavior of Ni{sub 3}Al alloys. Parallel efforts on alloy design using physical metallurgy principles have led to properties for structural use. Industrial interest in these alloys is high, and examples of industrial involvement in processing and utilization of these alloys are briefly mentioned.

  17. New developments in Ni/Ti multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, I.; Hoghoj, P. [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

    1997-04-01

    It is now 20 years since super-mirrors were first used as a neutron optical element. Since then the field of multilayer neutron-optics has matured with multilayers finding their way to application in many neutron scattering instruments. However, there is still room for progress in terms of multilayer quality, performance and application. Along with work on multilayers for neutron polarisation Ni/Ti super-mirrors have been optimised. The state-of-the-art Ni/Ti super-mirror performance and the results obtained in two neutron-optics applications of Ni/Ti multilayers are presented. (author).

  18. Binary Ni-Nb bulk metallic glasses

    Science.gov (United States)

    Xia, L.; Li, W. H.; Fang, S. S.; Wei, B. C.; Dong, Y. D.

    2006-01-01

    We studied the glass forming ability of Ni-Nb binary alloys and found that some of the alloys can be prepared into bulk metallic glasses by a conventional Cu-mold casting. The best glass former within the compositional range studied is off-eutectic Ni62Nb38 alloy, which is markedly different from those predicted by the multicomponent and deep eutectic rules. The glass formation mechanism for binary Ni-Nb alloys was studied from the thermodynamic point of view and a parameter γ* was proposed to approach the ability of glass formation against crystallization.

  19. Nickel Release, ROS Generation and Toxicity of Ni and NiO Micro- and Nanoparticles.

    Directory of Open Access Journals (Sweden)

    Siiri Latvala

    Full Text Available Occupational exposure to airborne nickel is associated with an elevated risk for respiratory tract diseases including lung cancer. Therefore, the increased production of Ni-containing nanoparticles necessitates a thorough assessment of their physical, chemical, as well as toxicological properties. The aim of this study was to investigate and compare the characteristics of nickel metal (Ni and nickel oxide (NiO particles with a focus on Ni release, reactive oxygen species (ROS generation, cellular uptake, cytotoxicity and genotoxicity. Four Ni-containing particles of both nano-size (Ni-n and NiO-n and micron-size (Ni-m1 and Ni-m2 were tested. The released amount of Ni in solution was notably higher in artificial lysosomal fluid (e.g. 80-100 wt% for metallic Ni than in cell medium after 24h (ca. 1-3 wt% for all particles. Each of the particles was taken up by the cells within 4 h and they remained in the cells to a high extent after 24 h post-incubation. Thus, the high dissolution in ALF appeared not to reflect the particle dissolution in the cells. Ni-m1 showed the most pronounced effect on cell viability after 48 h (alamar blue assay whereas all particles showed increased cytotoxicity in the highest doses (20-40 μg cm2 when assessed by colony forming efficiency (CFE. Interestingly an increased CFE, suggesting higher proliferation, was observed for all particles in low doses (0.1 or 1 μg cm-2. Ni-m1 and NiO-n were the most potent in causing acellular ROS and DNA damage. However, no intracellular ROS was detected for any of the particles. Taken together, micron-sized Ni (Ni-m1 was more reactive and toxic compared to the nano-sized Ni. Furthermore, this study underlines that the low dose effect in terms of increased proliferation observed for all particles should be further investigated in future studies.

  20. Ni nanoparticles prepared by simple chemical method for the synthesis of Ni/NiO-multi-layered graphene by chemical vapor deposition

    Science.gov (United States)

    Ali, Mokhtar; Remalli, Nagarjuna; Gedela, Venkataramana; Padya, Balaji; Jain, Pawan Kumar; Al-Fatesh, Ahmed; Rana, Usman Ali; Srikanth, Vadali V. S. S.

    2017-02-01

    A new chemical method was used to obtain a high yield of nickel nanoparticles (Ni-NPs). The effect of solvent (distilled water, ethylene glycol, and ethanol) and surfactant (oleic acid and polyvinyl pyrrolidinone) on the morphology and crystallinity of the synthesized Ni-NPs has been investigated. The experimental results revealed that among the solvents mentioned above, ethanol gives the best results in terms of complete reduction, controlled morphology and size distribution of Ni-NPs. The surfactants played an important role in impeding the agglomeration and surface oxidation of Ni-NPs. The surfactants also affected the morphology of the Ni-NPs. The synthesized Ni-NPs are found to be quite stable in air. The best of the synthesized Ni-NPs were effectively used as catalysts for the synthesis of Ni/NiO-multi-layered graphene using catalytic chemical vapor deposition technique.

  1. Synthesis of Supported NiPt Bimetallic Nanoparticles, Methods for Controlling the Surface Coverage of Ni Nanoparticles With Pt, Methods Of Making NiPt Multilayer Core-Shell Structures and Application of the Supported Catalysts for CO2 Reforming

    KAUST Repository

    Li, Lidong

    2015-06-25

    Embodiments of the present disclosure provide for supported Ni/Pt bimetallic nanoparticles, compositions including supported NiPt nanoparticles, methods of making supported NiPt nanoparticles, methods of using supported NiPt nanoparticles, and the like.

  2. Fine Structure in Multi-Phase Zr8Ni21-Zr7Ni10-Zr2Ni7 Alloy Revealed by Transmission Electron Microscope

    Directory of Open Access Journals (Sweden)

    Haoting Shen

    2015-07-01

    Full Text Available The microstructure of an annealed alloy with a Zr8Ni21 composition was studied by both scanning electron microscopy (SEM and transmission electron microscopy (TEM. The presence of three phases, Zr8Ni21, Zr2Ni7, and Zr7Ni10, was confirmed by SEM/X-ray energy dispersive spectroscopy compositional mapping and TEM electron diffraction. Distribution of the phases and their morphology can be linked to a multi-phase structure formed by a sequence of reactions: (1 L → Zr2Ni7 + L’; (2 peritectic Zr2Ni7 + L’ → Zr2Ni7 + Zr8Ni21 + L”; (3 eutectic L” → Zr8Ni21 + Zr7Ni10. The effect of annealing at 960 °C, which was intended to convert a cast structure into a single-phase Zr8Ni21 structure, was only moderate and the resulting alloy was still multi-phased. TEM and crystallographic analysis of the Zr2Ni7 phase show a high density of planar (001 defects that were explained as low-energy boundaries between rotational variants and stacking faults. The crystallographic features arise from the pseudo-hexagonal structure of Zr2Ni7. This highly defective Zr2Ni7 phase was identified as the source of the broad X-ray diffraction peaks at around 38.4° and 44.6° when a Cu-K was used as the radiation source.

  3. Incorporation of alumina particles into reactively sintered Ni{sub 3}Al; Hanno shoketsu ni yoru Ni{sub 3}Al eno alumina no fukugoka

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, M.; Ochiai, S.; Arai, T. [Teikyo Univ. of Science and Tech., Yamanashi (Japan); Sakamoto, Y. [Teikyo Univ. of Science and Tech., Yamanashi (Japan)]|[NIKKOSHI Co. Ltd., Tokyo (Japan); Koyama, M. [Japan Space Utilization Promotion Center, Tokyo (Japan)

    1998-08-15

    The Ni3Al having the structure of L1{sub 2} is attracting the attention of the people. As methods for preparing it, the reactive sintering method according to which Ni powders and Al powders are mixed first and then reacted at 700 degC to prepare the Ni2Al, and the combustion composition method are expected as the hopeful method. In this study, several processes for composing alumina while preparing the Ni3Al by reactively sintering Ni powders and Al powders, are compared. While dispersing alumina powders into Ni powders beforehand by mechanical dispersing (MD), the Ni3Al can be produced under the conditions as they are. As another method for producing the Ni3Al according to which NiO powders are mixed into Ni powders to oxidize surfaces of the Ni powders and then they react with the Al powders, the reactive sintering of the Ni3Al and the alumina generation by the thermit reaction progress simultaneously, but dispersion of the alumina is the worst and the void is too much. As for the method according to which the NiO powders in the Ni powders are mechanically dispersed and then reacted with Al powders, the resultant reactions hardly occur. 9 refs., 4 figs.

  4. An Ultrastable and High-Performance Flexible Fiber-Shaped Ni-Zn Battery based on a Ni-NiO Heterostructured Nanosheet Cathode.

    Science.gov (United States)

    Zeng, Yinxiang; Meng, Yue; Lai, Zhengzhe; Zhang, Xiyue; Yu, Minghao; Fang, Pingping; Wu, Mingmei; Tong, Yexiang; Lu, Xihong

    2017-11-01

    Currently, the main bottleneck for the widespread application of Ni-Zn batteries is their poor cycling stability as a result of the irreversibility of the Ni-based cathode and dendrite formation of the Zn anode during the charging-discharging processes. Herein, a highly rechargeable, flexible, fiber-shaped Ni-Zn battery with impressive electrochemical performance is rationally demonstrated by employing Ni-NiO heterostructured nanosheets as the cathode. Benefiting from the improved conductivity and enhanced electroactivity of the Ni-NiO heterojunction nanosheet cathode, the as-fabricated fiber-shaped Ni-NiO//Zn battery displays high capacity and admirable rate capability. More importantly, this Ni-NiO//Zn battery shows unprecedented cyclic durability both in aqueous (96.6% capacity retention after 10 000 cycles) and polymer (almost no capacity attenuation after 10 000 cycles at 22.2 A g-1 ) electrolytes. Moreover, a peak energy density of 6.6 µWh cm-2 , together with a remarkable power density of 20.2 mW cm-2 , is achieved by the flexible quasi-solid-state fiber-shaped Ni-NiO//Zn battery, outperforming most reported fiber-shaped energy-storage devices. Such a novel concept of a fiber-shaped Ni-Zn battery with impressive stability will greatly enrich the flexible energy-storage technologies for future portable/wearable electronic applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Investigation of Characteristics of Sprayed Ni-Cr and Ni-Cr-Wc Coatings

    Directory of Open Access Journals (Sweden)

    Ovidijus Jarašūnas

    2017-01-01

    Full Text Available The article deals with the flame sprayed Ni-Cr and Ni-Cr-WC coatings on construction S235 steel substrates. Before spraying, the surfaces of substrates were treated mechanically. Using the different chemical composition of Ni-Cr and Ni-Cr-WC spraying powder and additional substrate heating till 250–290 °C, were sprayed coatings. The microstructure, porosity, hardness, elastic modulus, wear resistance of the Ni-Cr and Ni-Cr-WC coatings were investigated in the work. The influence of the chemical composition and WC content of the coatings on the various physical and tribological properties of the coatings were evaluated. Also the dependence of these coatings characteristics was investigated.

  6. Structural analysis of Ni/NiO-water interface using X-ray reflectivity

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Jin; Kim, Seung Hyun; Kim, Ji Hyun [Ulsan National Institute of Science and technology, Ulsan (Korea, Republic of); Bahn, Chi Bum [Argonne National Laboratory, Illinois (United States)

    2013-10-15

    These test revealed the epitaxial relationship between Ni substrate and the oxide layer as well as those structures. However, still the resolution of the initial structural data of interface between water and pre oxidized Ni(110) surface is not clear. Therefore, the objective in this study was to obtain detailed structural data between pre-oxidized Ni(110) and water interfaces to investigate the mechanism of growth the passive film formed on Ni(110) by In-situ high energy X-ray reflectivity study and simulated atomistic model. The surface treatment procedure to increase the surface crystallinity was developed to surface x-ray reflectivity measurement. The CTR data shows the surface pre-treatment procedure developed for Ni(110) was suitable for the surface X-ray study. Synchrotron X-ray experiments and analyses will be continued to identify the surface interface between Ni(110), water, and solution contained lead.

  7. Contexto Familiar: Diferencias Conductuales entre Niños y Niñas

    OpenAIRE

    María Aurelia Ramírez Castillo

    2005-01-01

    En este trabajo se investigan las diferencias por género en problemas de conducta. En una muestra de 200 sujetos (niños y niñas) en tre 5 y 18 años de Granada (España), los resultados concluyen que los niños tienen más problemas de conducta delictiva que las niñas. Cuando existen conflictos matrimoniales y prácticas de crianza negativas, de nuevo los niños tienen más problemas externos que las niñas. En este trabajo se investigan las diferencias por género en problemas de condu...

  8. Ni Mineralization and PGE Characterization in the Kabanga and ...

    African Journals Online (AJOL)

    ... indicate that the Luhuma is also potential for Ni-Cu sulfide deposits particularly on drill holes LUH05 and LUH13 where these samples were taken. In other words, if TiO2 increases then Ni-Cu sulfide increases and hence the potential for Ni-Cu mineralization. Key words: Tanzania, Kabanga, Luhuma, PGE, Ni-Cu sulfides ...

  9. Crystallographic Orientation Effect on Electromigration in Ni-Sn Microbump

    Science.gov (United States)

    Huang, Yi-Ting; Chen, Chih-Hao; Chakroborty, Subhendu; Wu, Albert T.

    2017-09-01

    This article addresses the reliability challenges regarding electromigration in developing three-dimensional integrated circuits (3D-ICs). The line-type sandwich structure of Ni/Sn3.5Ag(15 μm)/Ni was used to simulate microbumps to examine the reliability of electromigration in 3D-IC technology. The solder strip of Ni/Sn3.5Ag(15 μm)/Ni was stressed with a current density of 1.0 × 104 A/cm2 at 150°C. The current stressing enhanced the reaction between the solder and Ni to form Ni3Sn4, which occupied the entire joint and transformed into a Ni/Ni3Sn4/Ni structure when the solder was completely consumed. Electron backscatter diffraction was used to analyze the crystallographic characteristics of Sn and Ni3Sn4 as related to the electromigration effect. The results indicated that the crystallographic orientation of Sn plays a significant role in the Ni/Sn3.5Ag/Ni, whereas the orientation of Ni3Sn4 is the dominant factor of diffusion behavior in the Ni/Ni3Sn4/Ni.

  10. Site occupancy of Fe in ternary Ni 75-x

    Indian Academy of Sciences (India)

    The results of a detailed structural and magnetic study clearly indicate that regardless of the thermal history of the samples, Fe has a strong preference for the Ni sites in Ni-poor (non-stoichiometric) Ni75Al25 alloys. Fe substitution has a profound effect on the nature of magnetism in Ni75Al25.

  11. Synthesis of stochastic open cell Ni-based foams

    Energy Technology Data Exchange (ETDEWEB)

    Queheillalt, Douglas T.; Katsumura, Yasushi; Wadley, Haydn N.G

    2004-02-15

    Open cell, stochastic Ni-based foams have been synthesized on carbon foam templates by transient liquid phase bonding nickel based superalloy (Ni-21Cr-9Mo-4Nb) and Ni-25Cr-10P powders. The mechanical properties of these Ni-based foams were similar to those of other lower temperature metal foams of similar topology.

  12. Studies on the valence electronic structure of Fe and Ni in Fe Ni ...

    Indian Academy of Sciences (India)

    -to- X-ray intensity ratios of Fe and Ni in pure metals and in FeNi1- alloys ( = 0.20, 0.50, 0.58) exhibiting similar crystalline structure have been measured following excitation by 59.54 keV -rays from a 241Am point source, to understand as to why the properties of permalloy Fe0.2Ni0.8 is distinct from other alloy ...

  13. Directional Solidification and Mechanical Properties of NiAl-NiAlTa Alloys

    Science.gov (United States)

    Johnson, D. R.; Chen, X. F.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Directional solidification of eutectic alloys is a promising technique for producing in-situ composite materials exhibiting a balance of properties. Consequently, the microstructure, creep strength and fracture toughness of directionally solidified NiAl-NiAlTa alloys were investigated. Directional solidification was performed by containerless processing techniques to minimize alloy contamination. The eutectic composition was found to be NiAl-15.5 at% Ta and well-aligned microstructures were produced at this composition. A near-eutectic alloy of NiAl-14.5Ta was also investigated. Directional solidification of the near-eutectic composition resulted in microstructures consisting of NiAl dendrites surrounded by aligned eutectic regions. The off-eutectic alloy exhibited promising compressive creep strengths compared to other NiAl-based intermetallics, while preliminary testing indicated that the eutectic alloy was competitive with Ni-base single crystal superalloys. The room temperature toughness of these two-phase alloys was similar to that of polycrystalline NiAl even with the presence of the brittle Laves phase NiAlTa.

  14. Modeling and simulation of NiO dissolution and Ni deposition in molten carbonate fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Suk Woo; Choi, Hyung-Joon; Lim, Tae Hoon [Korea Institute of Science & Technology, Seoul (Korea, Republic of)] [and others

    1996-12-31

    Dissolution of NiO cathode into the electrolyte matrix is an important phenomena limiting the lifetime of molten carbonate fuel cell (MCFC). The dissolved nickel diffuses into the matrix and is reduced by dissolved hydrogen leading to the formation of metallic nickel films in the pores of the matrix. The growth of Ni films in the electrolyte matrix during the continuous cell operation results eventually in shorting between cathode and anode. Various mathematical and empirical models have been developed to describe the NiO dissolution and Ni deposition processes, and these models have some success in estimating the lifetime of MCFC by correlating the amount of Ni deposited in the matrix with shorting time. Since the exact mechanism of Ni deposition was not well understood, deposition reaction was assumed to be very fast in most of the models and the Ni deposition region was limited around a point in the matrix. In fact, formation of Ni films takes place in a rather broad region in the matrix, the location and thickness of the film depending on operating conditions as well as matrix properties. In this study, we assumed simple reaction kinetics for Ni deposition and developed a mathematical model to get the distribution of nickel in the matrix.

  15. Metallic Ni3 P/Ni Co-Catalyst To Enhance Photocatalytic Hydrogen Evolution.

    Science.gov (United States)

    Zhao, Jun Jie; Liu, Peng Fei; Wang, Yu Lei; Li, Yu Hang; Zu, Meng Yang; Wang, Chong Wu; Wang, Xue Lu; Fang, Li Jun; Zeng, Hui Dan; Yang, Hua Gui

    2017-11-27

    Metallic Ni3 P/Ni can be used as a co-catalyst to replace noble metal Pt for efficient photocatalytic hydrogen evolution, due to its excellent trapping-electron ability. The applications of metallic Ni3 P/Ni co-catalyst on CdS, Zn0.5 Cd0.5 S, TiO2 (Degussa P25) and g-C3 N4 are further confirmed, indicating its versatile applicability nature like Pt. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Actitudes afectivas hacia niños y niñas con necesidades educativas especiales

    OpenAIRE

    Cárdenas Leitón, Helvetia

    2013-01-01

    En este artículo se analizan las actitudes afectivas de los compañeros de clase hacia niños y niñas con necesidades educativas especiales, integrados en el sistema de educación regular. Se parte de una investigación cualitativa realizada en cuatro secciones de I y II Ciclos de la Enseñanza General Básica, en Escuelas Urbano Marginales, donde se encontraban niños con necesidades educativas especiales. Se encontró que el tipo de relaciones que se suscitan con los niños integrados, están marcada...

  17. Niños y Violencia

    OpenAIRE

    International Child Development Centre

    1997-01-01

    Este Innocenti Digest explora la violencia de los niños y hacia los niños, usando el marco de la Convención de los Derechos del Niño de las Naciones Unidas. Se centra en la violencia interpersonal, tanto intrafamiliar como extrafamiliar. Se incluye el abuso sexual y la explotación ya que a pesar de no implicar obligatoriamente violencia o coerción, la mayor parte de la evidencia demuestra su efectos dañinos tanto físicos como psicológicos. También se discute la implicación de los niños en los...

  18. Ni adsorption and Ni-Al LDH precipitation in a sandy aquifer: An experimental and mechanistic modeling study

    NARCIS (Netherlands)

    Regelink, I.C.; Temminghoff, E.J.M.

    2011-01-01

    Mining activities and industries have created nickel (Ni) contaminations in many parts of the world. The objective of this study is to increase our understanding of Ni adsorption and Nickel-Aluminium Layered Double Hydroxide (Ni-Al LDH) precipitation to reduce Ni mobility in a sandy soil aquifer. At

  19. Consequences of Surface Oxophilicity of Ni, Ni-Co, and Co Clusters on Methane Activation.

    Science.gov (United States)

    Tu, Weifeng; Ghoussoub, Mireille; Singh, Chandra Veer; Chin, Ya-Huei Cathy

    2017-05-24

    This study describes a new C-H bond activation pathway during CH4-CO2 reactions on oxophilic Ni-Co and Co clusters, unlike those established previously on Ni clusters. The initial C-H bond activation remains as the sole kinetically relevant step on Ni-Co, Ni, and Co clusters, but their specific reaction paths vary. On Ni clusters, C-H bond activation occurs via an oxidative addition step that involves a three-center (H3C···*···H)⧧ transition state, during which a Ni-atom inserts into the C-H bond and donates its electron density into the C-H bond's antibonding orbital. Ni-Co clusters are more oxophilic than Ni; thus, their surfaces are covered with oxygen adatoms. An oxygen adatom and a vicinal Co-atom form a metal-oxygen site-pair that cleaves the C-H bond via a σ bond metathesis reaction, during which the Co inserts into the C-H bond while the oxygen abstracts the leaving H-atom in a concerted, four-center (H3C···*···H···O*)⧧ transition state. Similarly, Co clusters also catalyze the σ bond metathesis step, but much less effectively because of their higher oxophilicities, much stronger binding to oxygen, and less effective hydrogen abstraction than Ni-Co clusters. On Ni-Co and Co clusters, the pseudo-first-order rate coefficients are single-valued functions of the CO2-to-CO ratio (or H2O-to-H2 ratio), because this ratio prescribes the oxygen chemical potentials and the relative abundances of metal-oxygen site-pairs through the water-gas shift equilibrium. The direct involvement of reactive oxygen in the kinetically relevant step leads to more effective CH4 turnovers and complete elimination of coke deposition on Ni-Co bimetallic clusters.

  20. Microstructure and mechanical properties of sputter deposited Ni/Ni{sub 3}Al multilayer films at elevated temperature

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Chao [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Feng, Kai, E-mail: fengkai@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Li, Zhuguo, E-mail: lizg@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China); Lu, Fenggui; Huang, Jian; Wu, Yixiong [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai 200240 (China)

    2016-08-15

    Highlights: • Ni/Ni{sub 3}Al multilayers are prepared by magnetron sputtering. • Both grain size and phase constitution of annealed Ni/Ni{sub 3}Al multilayers are dependent on individual layer thickness. • The hardness of annealed Ni/Ni{sub 3}Al multilayers varies with individual layer thickness and annealing temperature. • 40 nm Ni/Ni{sub 3}Al multilayer exhibits excellent hardness at elevated temperature. - Abstract: Nano-structured Ni/Ni{sub 3}Al multilayer was prepared by magnetron sputtering, with individual layer thicknesses h varying from 10 to 160 nm. The microstructure and hardness of Ni/Ni{sub 3}Al multilayer were investigated by X-ray diffraction, transmission electron microscopy and nanoindentation. The results show that the hardness increases with decreasing h for as-deposited and 500 °C annealed multilayers. When annealed at 700 °C, the hardness approach a peak value at h = 40 nm with followed by softening at smaller h. The influence of individual layer thickness, grain size as well as formation of ordered Ni{sub 3}Al on strengthening mechanisms of Ni/Ni{sub 3}Al multilayers at elevated temperature are discussed.

  1. Direct versus hydrogen-assisted CO dissociation over stepped Ni and Ni3Fe surfaces: a computational investigation.

    Science.gov (United States)

    Yang, Kuiwei; Zhang, Minhua; Yu, Yingzhe

    2015-11-28

    The adsorption and dissociation of CO over stepped Ni and Ni3Fe surfaces were systematically studied using density functional theory slab calculations. Both (211)-like surface structure terminations (NiNi step and NiFe step, denoted as Ni3Fe(211)-AA and Ni3Fe(211)-AB) are considered for Ni3Fe. Direct scission of the C-O bond in CO is identified as the least likely one among the three proposed dissociation pathways and CO dissociation via a CHO intermediate appears to be most feasible at low CO coverage on pure and alloyed Ni(211) surfaces. The priority of H-assisted CO dissociation might originate from the more activated C-O bond in COH and CHO. Compared to Ni(211), the Ni3Fe(211)-AB surface could facilitate CO activation especially for the most possible CHO intermediate mechanism, whose rate-limiting step is found to be altered. The d-band center theory and Mulliken charge analysis are also employed to explain the activity difference between Ni3Fe(211)-AB and Ni3Fe(211)-AA. The significant structural sensitivity of CO dissociation highlights the importance of Fe locating in the step edge and the high reactivity of Ni3Fe(211)-AB is largely ascribed to the synergistic effect between Ni and Fe at the step edge.

  2. Single-crystalline Ni2Ge/Ge/Ni2Ge nanowire heterostructure transistors.

    Science.gov (United States)

    Tang, Jianshi; Wang, Chiu-Yen; Xiu, Faxian; Hong, Augustin J; Chen, Shengyu; Wang, Minsheng; Zeng, Caifu; Yang, Hong-Jie; Tuan, Hsing-Yu; Tsai, Cho-Jen; Chen, Lih Juann; Wang, Kang L

    2010-12-17

    In this study, we report on the formation of a single-crystalline Ni(2)Ge/Ge/Ni(2)Ge nanowire heterostructure and its field effect characteristics by controlled reaction between a supercritical fluid-liquid-solid (SFLS) synthesized Ge nanowire and Ni metal contacts. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies reveal a wide temperature range to convert the Ge nanowire to single-crystalline Ni(2)Ge by a thermal diffusion process. The maximum current density of the fully germanide Ni(2)Ge nanowires exceeds 3.5 × 10(7) A cm(-2), and the resistivity is about 88 μΩ cm. The in situ reaction examined by TEM shows atomically sharp interfaces for the Ni(2)Ge/Ge/Ni(2)Ge heterostructure. The interface epitaxial relationships are determined to be [Formula: see text] and [Formula: see text]. Back-gate field effect transistors (FETs) were also fabricated using this low resistivity Ni(2)Ge as source/drain contacts. Electrical measurements show a good p-type FET behavior with an on/off ratio over 10(3) and a one order of magnitude improvement in hole mobility from that of SFLS-synthesized Ge nanowire.

  3. Eutectic superalloys strengthened by delta Ni3Cb lamellae, and gamma prime, Ni3Al precipitates.

    Science.gov (United States)

    Lemkey, F. D.; Thompson, E. R.

    1972-01-01

    Bivariant eutectic alloys, located on a liquidus surface within the Ni-Cb-Cr-Al quaternary, were identified which permitted the production of aligned delta Ni3Cb lamellae within a nichrome matrix containing the fcc precipitate gamma prime Ni3Al. The volume fraction of delta and gamma prime could be varied significantly by compositional changes. After directional solidification certain alloys possessed improved ductility and corrosion resistance with respect to the Ni3Al-Ni3Cb eutectic, while their values of tensile and creep strength approached or exceeded those for the Ni3Al-Ni3Cb pseudobinary system. The mechanical properties of the directionally solidified alloy, Ni-19.7 wt % Cb-6.0 wt % Cr-2.5 wt % Al, were evaluated. Its longitudinal strength in tension and creep was found to be superior to all advanced nickel base superalloys. It is thus demonstrated that useful properties for gas turbine airfoil applications can be achieved by reinforcing a strong and tough gamma nichrome matrix containing precipitated gamma prime by a strong lamellar intermetallic compound having greater strength at elevated temperature.

  4. Ni(salen): a system that forms many solvates with interacting Ni atoms

    NARCIS (Netherlands)

    Siegler, M.A.M.|info:eu-repo/dai/nl/31411744X; Lutz, M.|info:eu-repo/dai/nl/304828971

    2009-01-01

    Recrystallization of [N,N’-Ethylene-bis(salicylideneiminato)]-nickel(II) [Ni(salen)] has been carried out from a large selection of solvents. Crystals can be either solvent free or solvates. This study is based on X-ray crystal structure determinations, which include the redetermination of Ni(salen)

  5. Enhanced Electrocatalytic Activity for Water Splitting on NiO/Ni/Carbon Fiber Paper

    Directory of Open Access Journals (Sweden)

    Ruoyu Zhang

    2016-12-01

    Full Text Available Large-scale growth of low-cost, efficient, and durable non-noble metal-based electrocatalysts for water splitting is crucial for future renewable energy systems. Atomic layer deposition (ALD provides a promising route for depositing uniform thin coatings of electrocatalysts, which are useful in many technologies, including the splitting of water. In this communication, we report the growth of a NiO/Ni catalyst directly on carbon fiber paper by atomic layer deposition and report subsequent reduction and oxidation annealing treatments. The 10–20 nm NiO/Ni nanoparticle catalysts can reach a current density of 10 mA·cm−2 at an overpotential of 189 mV for hydrogen evolution reactions and 257 mV for oxygen evolution reactions with high stability. We further successfully achieved a water splitting current density of 10 mA·cm−2 at 1.78 V using a typical NiO/Ni coated carbon fiber paper two-electrode setup. The results suggest that nanoparticulate NiO/Ni is an active, stable, and noble-metal-free electrocatalyst, which facilitates a method for future water splitting applications.

  6. Adherencia al tratamiento en niñas y niños con VIH

    Directory of Open Access Journals (Sweden)

    Ana María Ruiz Navia

    2009-01-01

    Full Text Available Este artículo describe y determina el grado de adherencia al tratamiento en niños y niñas con VIH/ SIDA teniendo en cuenta los comportamientos y las variables asociadas a ésta. La muestra estuvo conformada por 1 niño y 5 niñas, diagnosticados con VIH, y su respectivo cuidador primario, quienes respondieron a la entrevista semiestructurada de evaluación de adherencia para niños y niñas con VIH/ SIDA ad hoc y a la entrevista semiestructurada de evaluación de adherencia para niños y niñas con VIH/SIDA versión cuidador primario ad hoc, respectivamente. Los resultados muestran la presencia de conductas de adherencia en los participantes del estudio, evidenciando la influencia de una serie de variables determinantes para este comportamiento. Cinco de los participantes cumplieron más del 95% de adherencia, mientras que uno se ubicó por debajo de este porcentaje. Como aspectos centrales se destacan la influencia de los estados emocionales en la toma del medicamento y la importancia del rol del cuidador primario en la adherencia.

  7. Magnetic properties of monodispersed Ni/NiO core-shell nanoparticles.

    Science.gov (United States)

    Seto, Takafumi; Akinaga, Hiroyuki; Takano, Fumiyoshi; Koga, Kenji; Orii, Takaaki; Hirasawa, Makoto

    2005-07-21

    We have recently developed a method to fabricate monodispersed Ni/NiO core-shell nanoparticles by pulsed laser ablation. In this report, the size-dependent magnetic properties of monodispersed Ni/NiO core-shell nanoparticles were investigated. These nanoparticles were formed in two steps. The first was to fabricate a series of monodispersed Ni nanoparticles of 5 to 20 nm in diameter using a combination of laser ablation and size classification by a low-pressure differential mobility analyzer (DMA). The second step was to oxidize the surfaces of the Ni particles in situ to form core-shell structures. A superconducting quantum interference device (SQUID) magnetometer was used to measure the magnetic properties of nanostructured films prepared by depositing the nanoparticles at room temperature. Ferromagnetism was observed in the magnetic hysteresis loop of the nanostructured films composed of core-shell nanoparticles with core diameters smaller than the superparamagnetic limit, which suggests the spin of Ni core was weakly exchange coupled with antiferromagnetic NiO shell. In contrast, smaller nanoparticles with core diameters of 3.0 nm exhibited superparamagnetism. The drastic change in the hysteresis loops between field-deposited and zero-field-deposited samples was attributable to the strong anisotropy that developed during the magnetic-field-assisted nanostructuring process.

  8. Ab initio phonon calculations for Ll(2) Ni3Al and B2NiAl

    NARCIS (Netherlands)

    Isaeva, E.I.; Lichtenstein, A.I.; Vekilov, Y.K.; Smirnova, E.A.; Abrikosov, I.A.; Simak, S.I.; Ahuja, R.; Johansson, B.

    2004-01-01

    The phonon spectra and phonon density of states of the Ni3Al and NiAl intermetallic compounds are calculated from first principles using the linear response method in conjunction with ultrasoft pseudopotentials. The calculated phonon dispersion curves are in good agreement with available

  9. Reactivity and wettability of SiC by Ni and Ni-Si alloys

    Energy Technology Data Exchange (ETDEWEB)

    Rado, C. [INPG, 38 - Saint Martin d`Heres (France). LTPCM; Kalogeropoulou, S. [INPG, 38 - Saint Martin d`Heres (France). LTPCM; Eustathopoulos, N. [INPG, 38 - Saint Martin d`Heres (France). LTPCM

    1996-08-01

    Wettability of SiC by Ni and Ni-Si alloys was studied at 1633K by the sessile drop technique under high vacuum or pure He. It is shown that reactivity in this system can be controlled and even nearly suppressed while obtaining good wetting and strong interface. (orig.)

  10. Probing the semi-magicity of $^{68}$Ni via the $^{3}$H($^{66}$Ni,$^{68}$Ni)p two-neutron transfer reaction in inverse kinematics

    CERN Multimedia

    Reiter, P; Blazhev, A A; Kruecken, R; Franchoo, S; Mertzimekis, T; Darby, I G; Van de walle, J; Raabe, R; Elseviers, J; Gernhaeuser, R A; Sorlin, O H; Georgiev, G P; Bree, N C F; Habs, D; Chapman, R; Gaudefroy, L; Diriken, J V J; Jenkins, D G; Kroell, T; Axiotis, M; Huyse, M L; Patronis, N

    We propose to perform the two-neutron transfer reaction $^{3}$H($^{66}$Ni, $^{68}$Ni)$p$ using the ISOLDE radioactive ion beam at 2.7 $A$ MeV and the MINIBALL + T-REX setup to characterize the 0$^{+}$ and 2$^{+}$ states in $^{68}$Ni.

  11. Ni(OH){sub 2} and NiO nano structures: Synthesis, characterization and electrochemical performance

    Energy Technology Data Exchange (ETDEWEB)

    Saghatforoush, Lotf Ali; Sanati, Soheila; Mehdizadeh, Robabeh [Payam Noor Univ., Tehran (Iran, Islamic Republic of); Hasanzadeh, Mohammad [Tabriz Univ. of Medical Sciences, Tabriz (Iran, Islamic Republic of)

    2012-04-15

    Hydrothermal route have been used in different conditions for preparation of Ni(OH){sub 2} nano structures. The NiO nanoparticles were obtained by calcining the Ni(OH){sub 2} precursor at 450 .deg. C for 2 h. The effect of sodium dodecyl sulfonate (SDS) as surfactant on the morphology and size of Ni(OH){sub 2} nanoparticles were discussed in detail. X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize the products. The growth mechanism of the as-synthesized nano structures was also discussed in detail based on the experimental results. Coming up, the NiO nanoparticle modified carbon paste electrode was applied to the determination of captopril in aqueous solution.

  12. NiO Nanoparticles: Synthesis and Characterization

    Directory of Open Access Journals (Sweden)

    A. Rahdar

    2015-04-01

    Full Text Available In the current paper,Nanostructured Nickel oxide (NiO were synthesized by co-precipitation method using Nickel(II Chloride Hexahydrate (NiCl2.6H2O and sodium hydroxide (NaOH as starting material. Structural, optical and magnetic properties of nanostructures were characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM, Atomic force microscope (AFM, UV–Vis absorption; Fourier transformed infrared (FTIR and vibrating sample magnetometer (VSM technique. The X-ray diffraction pattern studies revealed the NiO have a  face-centered cubic (FCC structure and confirmed the presence of high degree of crystallinity nature NiO nanoparticles that their average size is found to be 26 nm. The composition of nanostructures confirmed by analysis of FTIR spectra. The average size of the NiO nanoparticle observed from scanning electron microscopy images is found to be dimensions about 24 nm. Magnetic measurement confirmed the Nickel Oxide nanostructures superparamagnetic behavior at room temperature (RT after calcinations.

  13. Hydrothermal synthesis of α-Ni(OH){sub 2} and its conversion to NiO with electrochemical properties

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Yong; Ma, Jianmin, E-mail: nanoelechem@hnu.edu.cn; Wang, Taihong, E-mail: thwang@hnu.edu.cn

    2014-01-05

    Highlights: • α-Ni(OH){sub 2} microspheres have been synthesized with triethanolamine. • The formation mechanism of α-Ni(OH){sub 2} microspheres is suggested. • NiO deriving from α-Ni(OH){sub 2} microspheres exhibits better electrochemical performances. -- Abstract: The paper reports the fabrication of microscale NiO matrixes with enhanced electrochemical properties through annealing the corresponding chrysanthemum-like α-Ni(OH){sub 2} microspheres. The precursor α-Ni(OH){sub 2} can be synthesized by a hydrothermal method using triethanolamine as the alkaline source. The formation mechanism of chrysanthemum-like α-Ni(OH){sub 2} microspheres is properly discussed. Furthermore, the electrochemical experiments demonstrate that the microscale NiO matrixes show superior electrochemical behavior in lithium-ion batteries due to their unique structures.

  14. Exchange bias effect in polycrystalline NiO/NiMn{sub 2}O{sub 4} composite

    Energy Technology Data Exchange (ETDEWEB)

    Freitas Cabral, A.J. [Instituto de Ciências Exatas e Naturais, Universidade Federal do Pará (UFPA), Belém, PA (Brazil); Peña Serna, J.; Rache Salles, B.; Novak, M.A. [Instituto de Física, Universidade Federal do Rio de janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Pinto, A.L. [Centro Brasileiro de Pesquisas Físicas (CBPF), Rio de Janeiro, RJ (Brazil); Rocha Remédios, C.M. [Instituto de Ciências Exatas e Naturais, Universidade Federal do Pará (UFPA), Belém, PA (Brazil)

    2015-05-05

    Highlights: • Antiferromagnetic NiO/ferrimagnetic NiMn{sub 2}O{sub 4} oxide composites. • Grains are well faceted, indicating that the specimen was well crystallized. • The micrographs suggests that NiO and NiMn{sub 2}O{sub 4} may be stuck to each other. • EB effect in NiO/NiMn{sub 2}O{sub 4} oxide composites. • EB effect increases with the amount of NiO. - Abstract: Calcination of aqueous solutions formed by different molar ratios between the nickel and manganese chlorides led to the formation of antiferromagnetic NiO/ferrimagnetic NiMn{sub 2}O{sub 4} oxide composites, as determined by X-ray powder diffraction technique and Rietveld refinement. Low temperature zero field cooled and field cooled magnetic hysteresis cycles show an exchange bias effect, presumably due to interaction at the interfaces between the antiferromagnetic and ferrimagnetic materials.

  15. Hydrogenation of Amorphous and Crystalline RE-Ni Alloys

    OpenAIRE

    AOKI, Kiyoshi; Shirakawa, Kiwamu; MASUMOTO, Tsuyoshi

    1985-01-01

    Amorphous alloys with the combination of a rare earth metal(RE=Y, La, Ce, Pr and Sm) and nickel were prepared around the composition at an eutectic point by the melt-quenching technique. Amorphous Y-Ni and Sm-Ni alloys absorbed a large amount of hydrogen even in the amorphous state, while the the other alloys in La-Ni, Ce-Ni and Pr-Ni systems were decomposed to a mixture of crystalline phase and hydride during hydrogenation at 323 K. An amorphous SmNi_2 phase was also synthesized by reaction ...

  16. Reduction of a Ni/Spinel Catalyst for Methane Reforming

    DEFF Research Database (Denmark)

    Kehres, Jan; Andreasen, Jens Wenzel; Fløystad, Jostein Bø

    2015-01-01

    A nickel/spinel (Ni/MgAl2O4) catalyst, w(Ni) = 22 wt%, was investigated in situ during reduction with wide angle X-ray scattering (WAXS) in a laboratory setup and with anomalous small angle X-ray scattering (ASAXS) at a synchrotron source. Complementary high resolution transmission electron...... microscopy (HRTEM) was performed on the fresh catalyst sample. The Ni particles in the fresh catalyst sample were observed to exhibit a Ni/NiO core/shell structure. A decrease of the Ni lattice parameter is observed during the reduction in a temperature interval from 413 – 453 K, which can be related...

  17. Evolution of Ni nanofilaments and electromagnetic coupling in the resistive switching of NiO

    Science.gov (United States)

    Luo, Yuxiang; Zhao, Diyang; Zhao, Yonggang; Chiang, Fu-Kuo; Chen, Pengcheng; Guo, Minghua; Luo, Nannan; Jiang, Xingli; Miao, Peixian; Sun, Ying; Chen, Aitian; Lin, Zhu; Li, Jianqi; Duan, Wenhui; Cai, Jianwang; Wang, Yayu

    2014-12-01

    Resistive switching effect in conductor/insulator/conductor thin-film stacks is promising for resistance random access memory with high-density, fast speed, low power dissipation and high endurance, as well as novel computer logic architectures. NiO is a model system for the resistive switching effect and the formation/rupture of Ni nanofilaments is considered to be essential. However, it is not clear how the nanofilaments evolve in the switching process. Moreover, since Ni nanofilaments should be ferromagnetic, it provides an opportunity to explore the electromagnetic coupling in this system. Here, we report a direct observation of Ni nanofilaments and their specific evolution process for the first time by a combination of various measurements and theoretical calculations. We found that multi-nanofilaments are involved in the low resistance state and the nanofilaments become thin and rupture separately in the RESET process with subsequent increase of the rupture gaps. Theoretical calculations reveal the role of oxygen vacancy amount in the evolution of Ni nanofilaments. We also demonstrate electromagnetic coupling in this system, which opens a new avenue for multifunctional devices.Resistive switching effect in conductor/insulator/conductor thin-film stacks is promising for resistance random access memory with high-density, fast speed, low power dissipation and high endurance, as well as novel computer logic architectures. NiO is a model system for the resistive switching effect and the formation/rupture of Ni nanofilaments is considered to be essential. However, it is not clear how the nanofilaments evolve in the switching process. Moreover, since Ni nanofilaments should be ferromagnetic, it provides an opportunity to explore the electromagnetic coupling in this system. Here, we report a direct observation of Ni nanofilaments and their specific evolution process for the first time by a combination of various measurements and theoretical calculations. We found

  18. La niña proletaria

    Directory of Open Access Journals (Sweden)

    Cartabia, Sabrina A.

    2011-12-01

    Full Text Available El presente trabajo se propone trazar un paralelo entre el cuento de Osvaldo Lamborghini “El niño proletario”, el cual, según la autora del ensayo, introduce al lector en la lucha de clases y el sometimiento de los/as proletarios/as, que sufren las mujeres, en particular a través de la violencia sexual. De esa forma la autora se pregunta si el poder que ciertas clases detentan sobre otras no influye también sobre el sometimiento de la mujer. El ensayo analiza además cómo la violencia sexual es una herramienta que constituye la base de la desigualdad, el sometimiento y la degradación de la mujer, al igual que constituye una herramienta de opresión de otros grupos vulnerables como los niños y niñas.

  19. [NiFeSe]-hydrogenase chemistry.

    Science.gov (United States)

    Wombwell, Claire; Caputo, Christine A; Reisner, Erwin

    2015-11-17

    The development of technology for the inexpensive generation of the renewable energy vector H2 through water splitting is of immediate economic, ecological, and humanitarian interest. Recent interest in hydrogenases has been fueled by their exceptionally high catalytic rates for H2 production at a marginal overpotential, which is presently only matched by the nonscalable noble metal platinum. The mechanistic understanding of hydrogenase function guides the design of synthetic catalysts, and selection of a suitable hydrogenase enables direct applications in electro- and photocatalysis. [FeFe]-hydrogenases display excellent H2 evolution activity, but they are irreversibly damaged upon exposure to O2, which currently prevents their use in full water splitting systems. O2-tolerant [NiFe]-hydrogenases are known, but they are typically strongly biased toward H2 oxidation, while H2 production by [NiFe]-hydrogenases is often product (H2) inhibited. [NiFeSe]-hydrogenases are a subclass of [NiFe]-hydrogenases with a selenocysteine residue coordinated to the active site nickel center in place of a cysteine. They exhibit a combination of unique properties that are highly advantageous for applications in water splitting compared with other hydrogenases. They display a high H2 evolution rate with marginal inhibition by H2 and tolerance to O2. [NiFeSe]-hydrogenases are therefore one of the most active molecular H2 evolution catalysts applicable in water splitting. Herein, we summarize our recent progress in exploring the unique chemistry of [NiFeSe]-hydrogenases through biomimetic model chemistry and the chemistry with [NiFeSe]-hydrogenases in semiartificial photosynthetic systems. We gain perspective from the structural, spectroscopic, and electrochemical properties of the [NiFeSe]-hydrogenases and compare them with the chemistry of synthetic models of this hydrogenase active site. Our synthetic models give insight into the effects on the electronic properties and reactivity of

  20. Two-proton radioactivity of 48Ni

    Science.gov (United States)

    Miernik, Krzysztof

    2011-10-01

    In experiment performed at NSCL facility we studied the decay of extremely neutron deficient isotope of 48Ni. Ions were implanted into a gaseuos detector, the Optical Time Projection Chamber which allows to record tracks of charged particles. Six events of 48Ni were observed, the two-proton radioactivity (four events) and the β-decay (two events) channels were clearly indentified. The half-life of 48Ni is determined to be T1 / 2 = 2.1-0. 4 + 1 . 4 ms. The results of three-dimensional events reconstruction as well as comparison of results with theoretical models will be presented. Research performed as a Eugene P. Wigner Fellow and staff member at the Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U.S. Department of Energy under Contract DE-AC05-00OR22725.

  1. Voz del niño

    OpenAIRE

    Urra-Barandiarán, A. (Ainhoa); Vázquez-de-la-Iglesia, F. (Francisco); Fernandez-Gonzalez, S. (Secundino); Molina, M.T.

    2006-01-01

    En el curso de la vida la voz sufre diferentes cambios que obedecen a factores de desarrollo y en los que intervienen de manera decisiva el sistema nervioso y el sistema hormonal. La voz del niño y, por tanto la disfonía en el niño requiere una evaluación precisa y específica, no sólo desde el punto de vista instrumental sino también perceptual y en evaluación logopédica. Se insiste en la protocolización de elaboración de trastornos de voz en el niño, la revisión de los f...

  2. Microstructure evolution of electroless Ni P and Ni Cu P deposits on Cu in the presence of additives

    Science.gov (United States)

    Lin, Kwang-Lung; Chang, Yu-Lan; Huang, Chiao-Chan; Li, Fang-I.; Hsu, Jen-Che

    2001-09-01

    The microstructures of electroless Ni-P and Ni-Cu-P deposits were investigated in the presence of thiourea and saccharin with AFM. The phosphorus contents and crystallinity of the deposits were investigated. Saccharin was found to refine the nodular structure of the Ni-Cu-P deposit, while not affecting the P% of the Ni-P and Ni-Cu-P deposits. On the other hand, thiourea was found to affect the P% and surface roughness of the Ni-P deposit. Thiourea does not exhibit nodular refining effect on the deposit.

  3. The acceleration intermediate phase (NiS and Ni3S2) evolution by nanocrystallization in Li/NiS2 thermal batteries with high specific capacity

    Science.gov (United States)

    Jin, Chuanyu; Zhou, Lingping; Fu, Licai; Zhu, Jiajun; Li, Deyi; Yang, Wulin

    2017-06-01

    The intermediate phase of NiS2 is thought to be a bottleneck currently to improve the overall performance of Li/NiS2 thermal batteries because of its low conductivity and close formation enthalpy between NiS2 and the intermediate phase (NiS, Ni3S2, etc). For improving the discharge performances of Li/NiS2 thermal batteries, the nano NiS2 with an average size of 85 ± 5 nm is designated as a cathode material. The electrochemical measurements show that the specific capacity of nano NiS2 cathode is higher than micro NiS2. The nano NiS2 cathode exhibits excellent electrochemical performances with high specific capacities of 794 and 654 mAh g-1 at current density of 0.1 and 0.5 A cm-2 under a cut-off voltage of 0.5 V, respectively. These results show that the rapid intermediate phase evolution from the nanocrystallization can obviously enhance use efficiency of NiS2 and improve discharge performances of thermal batteries.

  4. Hierarchical NiCo2 S4 Nanotube@NiCo2 S4 Nanosheet Arrays on Ni Foam for High-Performance Supercapacitors.

    Science.gov (United States)

    Chen, Haichao; Chen, Si; Shao, Hongyan; Li, Chao; Fan, Meiqiang; Chen, Da; Tian, Guanglei; Shu, Kangying

    2016-01-01

    Hierarchical NiCo2 S4 nanotube@NiCo2 S4 nanosheet arrays on Ni foam have been successfully synthesized. Owing to the unique hierarchical structure, enhanced capacitive performance can be attained. A specific capacitance up to 4.38 F cm(-2) is attained at 5 mA cm(-2) , which is much higher than the specific capacitance values of NiCo2 O4 nanosheet arrays, NiCo2 S4 nanosheet arrays and NiCo2 S4 nanotube arrays on Ni foam. The hierarchical NiCo2 S4 nanostructure shows superior cycling stability; after 5000 cycles, the specific capacitance still maintains 3.5 F cm(-2) . In addition, through the morphology and crystal structure measurement after cycling stability test, it is found that the NiCo2 S4 electroactive materials are gradually corroded; however, the NiCo2 S4 phase can still be well-maintained. Our results show that hierarchical NiCo2 S4 nanostructures are suitable electroactive materials for high performance supercapacitors. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Radiation damage buildup and dislocation evolution in Ni and equiatomic multicomponent Ni-based alloys

    Science.gov (United States)

    Levo, E.; Granberg, F.; Fridlund, C.; Nordlund, K.; Djurabekova, F.

    2017-07-01

    Single-phase multicomponent alloys of equal atomic concentrations (;equiatomic;) have proven to exhibit promising mechanical and corrosion resistance properties, that are sought after in materials intended for use in hazardous environments like next-generation nuclear reactors. In this article, we investigate the damage production and dislocation mobility by simulating irradiation of elemental Ni and the alloys NiCo, NiCoCr, NiCoFe and NiFe, to assess the effect of elemental composition. We compare the defect production and the evolution of dislocation networks in the simulation cells of two different sizes, for all five studied materials. We find that the trends in defect evolution are in good agreement between the different cell sizes. The damage is generally reduced with increased alloy complexity, and the dislocation evolution is specific to each material, depending on its complexity. We show that increasing complexity of the alloys does not always lead to decreased susceptibility to damage accumulation under irradiation. We show that, for instance, the NiCo alloy behaves very similarly to Ni, while presence of Fe or Cr in the alloy even as a third component reduces the saturated level of damage substantially. Moreover, we linked the defect evolution with the dislocation transformations in the alloys. Sudden drops in defect number and large defect fluctuations from the continuous irradiation can be explained from the dislocation activity.

  6. Tipos especiales de niños

    Directory of Open Access Journals (Sweden)

    Mercedes Rodrigo Bellido

    1946-09-01

    Full Text Available En las tres últimas lecciones han sido expuestas algunas consideraciones referentes a niños y adolescentes desde el nacimiento hasta el dintel de la juventud. En todas ellas hemos procurado poner de relieve la necesidad de individualizar el conocimiento de cada niño para obtener mejores resultados en su adaptación a su futura vida de adultos, En todas ellas  nos hemos referido al llamado niño normal. Nos corresponde en la lección de hoy ocuparnos can la superficialidad característica de estas charlas tipo-muestrario, de otras categorías de niños muy dignos de interés.. quienes unas por exceso, otros por defecto, otros por dificultades de adaptación por diferentes causas, se desvían de la línea media de la normalidad. Consideramos que no está fuera del lugar, aquí, el tema de los niños excepcionales y por el contrario que es necesario intensificar el estudio de los trastornos de la vida mental y emocional de los niños en la preparación de los estudiantes de Medicina. Y no es nuestra solo esta opinión; no hace mucho tiempo en la Medical School de Ia Universidad de Minnessota hemos sabido que se ha hecho un intento de considerar y evaluar factores emocionales ambientales sobre las mismas bases que los descubrimientos fisiológicos.

  7. Ni Foam-Ni3 S2 @Ni(OH)2 -Graphene Sandwich Structure Electrode Materials: Facile Synthesis and High Supercapacitor Performance.

    Science.gov (United States)

    Wang, Xiaobing; Hu, Jiangjiang; Su, Yichang; Hao, Jin; Liu, Fanggang; Han, Shuang; An, Jian; Lian, Jianshe

    2017-03-23

    A novel Ni foam-Ni3 S2 @Ni(OH)2 -graphene sandwich-structured electrode (NF-NN-G) with high areal mass loading (8.33 mg cm(-2) ) has been developed by sulfidation and hydrolysis reactions. The conductivity of Ni3 S2 and Ni(OH)2 were both improved. The upper layer of Ni(OH)2 , covered with a thin graphene film, is formed in situ from the surface of the lower layer of Ni3 S2 , whereas the Ni3 S2 grown on Ni foam substrate mainly acts as a rough support bridging the Ni(OH)2 and Ni foam. The graphene stabilized the Ni(OH)2 and the electrochemical properties were effectively enhanced. The as-synthesized NF-NN-G-5mg electrode shows a high specific capacitance (2258 F g(-1) at 1 A g(-1) or 18.81 F cm(-2) at 8.33 mA cm(-2) ) and an outstanding rate property (1010 F g(-1) at 20 Ag(-1) or 8.413 F cm(-2) at 166.6 mA cm(-2) ). This result is around double the capacitance achieved in previous research on Ni3 S2 @Ni(OH)2 /3DGN composites (3DGN=three-dimensional graphene network). In addition, the as-fabricated NF-NN-G-5mg composite electrode has an excellent cycle life with no capacitance loss after 3000 cycles, indicating a potential application as an efficient electrode. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. NiTi Expansion in Operated Unilateral Cleft Palate Patients

    Directory of Open Access Journals (Sweden)

    K Y Poornima

    2011-01-01

    Conclusion : NiTi expansion in operated cleft patients, showed mainly orthodontic expansion. The significant change in the maxillary inter- molar region is due to the direct placement of NiTi palatal expander to 16, 26.

  9. Funciones cognoscitivas en niños y niñas con trastorno disocial comparados con niños y niñas sin el trastorno

    OpenAIRE

    Urazán Torres, Gina Rocio

    2011-01-01

    Este proyecto de investigación tuvo como objetivo evaluar y caracterizar las funciones cognoscitivas de un grupo de niños y niñas con Trastorno Disocial (TD), comparándolas con las de un grupo de niños y niñas normales. Se utilizó un diseño de casos y controles con una muestra de 39 niños y niñas entre 6 y 12 años de edad con TD y 39 niños y niñas del mismo rango de edades y los mismos estratos socioeconómicos. Los participantes fueron seleccionados de diferentes instituciones educativas de B...

  10. Enhancement of porous silicon photoluminescence using (Ni) treatment

    Science.gov (United States)

    Nabil, M.; Elnouby, M.; Gayeh, N.; Sakr, A. H.; Motaweh, H. A.

    2017-10-01

    A new method has been developed to improve the photoluminescence intensity of porous silicon (PS). Self-organized (PS) can be used in various fields. The deposition of metal nanoparticles (Ni) allows utilizing the obtained nano-composite for numerous applications such as sensor technology, biomedicine, and many more. (Ni/PS) nano-composite powders are prepared using Ni deposition on the PS powder surface. The (Ni/PS) powders became hydrophilic by the deposited Ni nanoparticles. At the different percentages of (Ni: PS), at a higher percentage than (3:1) the values of the crystallite size of Ni and PS are nearly equivalent which suggests the saturation case of PS surface by Ni particles. It also depends on the deposition time value. In this study, that is the commercialization of nanostructured materials, it is important that the manufacturing costs are appropriate and inexpensive for large scale production, in addition, the enhancement of the photoluminescence intensity of (PS).

  11. Hydrogenation of Ethyl Acetate to Ethanol over Ni-Based Catalysts Obtained from Ni/Al Hydrotalcite-Like Compounds

    Directory of Open Access Journals (Sweden)

    Longfei Jiang

    2010-07-01

    Full Text Available A series of Ni-based catalysts were prepared using hydrogen reduction of Ni/Al hydrotalcite-like compounds (Ni/Al HTlcs synthesized by coprecipitation. The physico-chemical properties of Ni/Al hydrotalcite-like compounds and the corresponding Ni-based catalysts were characterized using inductively coupled plasma (ICP, BET surface areas, X-ray diffraction (XRD, Fourier transform infrared (FTIR spectroscopy and scanning electron microscopy (SEM techniques. The results indicated that Ni/Al HTlcs with layered structures could be successfully prepared by the coprecipitation method, and the characteristic HTlcs reflections were also observed in the XRD analysis. The NiO and Ni0 phases were identified in all Ni-based catalysts, which displayed randomly interconnected pores and no layer structures. In addition, the studies also found the Ni/Al HTlcs and Ni-based catalysts had high specific surface areas, low pore volumes and low pore diameters. The catalytic hydrogenation of ethyl acetate to ethanol with Ni-based catalysts was also investigated. Among the studied catalysts, RE1NASH-110-3 showed the highest selectivity and yield of ethyl acetate to ethanol, which were 68.2% and 61.7%, respectively. At the same time, a major by-product, butyl acetate, was formed due to an ester-exchange reaction. A proposed hydrogenation pathway for ethyl acetate over Ni-based catalysts was suggested.

  12. Structural study of radiolytic catalysts Ni-Ce/Al2O3 and Ni-Pt/Al2O3

    Science.gov (United States)

    Seridi, F.; Chettibi, S.; Keghouche, N.; Beaunier, P.; Belloni, J.

    2017-01-01

    Ni-Ce and Ni-Pt bimetallic catalysts supported over α-Al2O3 are synthesized by using co-impregnation method, and then reduced, each via radiolytic process or thermal H2-treatment. For Ni-Ce/Al2O3, the structural study reveals that Ce is alloyed with Ni as Ce2Ni7 nanoparticles in the radiation-reduced catalysts, while it segregates to the surface in the form of CeO2 in the H2-reduced catalysts. For Ni-Pt/Al2O3 radiolytic catalysts, Ni, Pt, NiPt and Ni3Pt nanoparticles, which size is 3.5 nm, are observed. When the radiation-reduced samples are tested in the benzene hydrogenation, they both display high conversion rate. However, the Ni-Pt/Al2O3 is more efficient than Ni-Ce/Al2O3. The performance of the catalysts is correlated with the high dispersion of the metal and the presence of intermetallic Ni-Pt and Ni-Ce phases. It is compared to that of other radiolytic monometallic/oxide catalysts of the literature.

  13. Melting in the Fe-Ni system

    Science.gov (United States)

    Lord, O. T.; Walter, M. J.; Vocadlo, L.; Wood, I. G.; Dobson, D. P.

    2012-12-01

    The melting temperature of the Fe-rich core alloy at the inner core boundary (ICB) condition of 330 GPa is a key geophysical parameter because it represents an anchor point on the geotherm. An accurate knowledge of the melting curves of candidate alloys is therefore highly desirable. In spite of this, there is still considerable uncertainty in the melting point even of pure Fe at these conditions; estimates range from as low as 4850K based on one laser heated diamond anvil cell (LHDAC) study [1] to as high as 6900K based on recent quantum Monte Carlo calculations [2]. In reality we expect that the bulk core alloy may contain 5-10 wt% Ni (based on cosmochemical and meteoritic arguments) and up to 10 wt% of an as yet undetermined mix of light elements (with Si, S, C and O being the most likely candidates). While some recent studies have looked at the effects of light elements on the melting curve of Fe [e.g.: 3,4] with some of these studies including a small amount of Ni in their starting material, to date there has been no systematic study of melting temperatures in the Fe-Ni system. To address this issue, we have embarked upon just such a study. Using the LHDAC we have determined the melting curve of the pure Ni end-member to 180 GPa, and that of pure Fe to 50 GPa, using perturbations in the power vs. temperature function as the melting criterion [5]. Ar or NaCl were employed as pressure media while temperature was measured using standard spectroradiometric techniques [6]. In the case of Ni, perturbations were observed for both the sample and the Ar medium, allowing us to determine the melting curve of Ar and Ni simultaneously. Our results thus far for Ni and Ar agree closely with all of the available data, while extending the melting curves by a factor of two in pressure. In the case of Fe, our current dataset is also in good agreement with previous studies [2,7]. The agreement of all three melting curves with the literature data as well as other materials

  14. NiO Nanofibers as a Candidate for a Nanophotocathode

    Directory of Open Access Journals (Sweden)

    Thomas J. Macdonald

    2014-04-01

    Full Text Available p-type NiO nanofibers have been synthesized from a simple electrospinning and sintering procedure. For the first time, p-type nanofibers have been electrospun onto a conductive fluorine doped tin oxide (FTO surface. The properties of the NiO nanofibers have been directly compared to that of bulk NiO nanopowder. We have observed a p-type photocurrent for a NiO photocathode fabricated on an FTO substrate.

  15. Facile synthesis of monodisperse thermally immiscible Ag–Ni alloy ...

    Indian Academy of Sciences (India)

    Administrator

    to their synergistic effects. Using Ag–Ni ANPs, at the same time, is more economical than pure silver ANPs. According to the literature, metal-catalyst decoration can .... 1451. Figure 7. Schematic representation of the Ag–Ni ANP forma- tion. M stands for a metal element. Schematic representation of the Ag–Ni ANP formation.

  16. Fabrication of micro-Ni arrays by electroless and electrochemical ...

    Indian Academy of Sciences (India)

    Nickel micro-arrays were fabricated by electroless and electrochemical deposition in an etched porous aluminum membrane. The aluminum membrane with metal characteristic could be fabricated from high-purity aluminium by electrochemical method. The aluminum reduced Ni2+ into Ni and the formed Ni nuclei served as ...

  17. Optimization of process parameters for synthesis of silica–Ni ...

    Indian Academy of Sciences (India)

    The optimumcombination of experimental variable, temperature, time of heat treatment under nitrogen atmosphere and amount of Ni-salt was delineated to find out the maximum yield of nanophase Ni in the silica gel matrix. The size of Ni in the silica gel was found to be 34 and 45 nm for the two chosen compositions, ...

  18. Energetic Mapping of Ni Catalysts by Detailed Kinetic Modeling

    DEFF Research Database (Denmark)

    Bjørgum, Erlend; Chen, De; Bakken, Mari G.

    2005-01-01

    Temperature-programmed desorption (TPD) of CO has been performed on supported and unsupported nickel catalysts. The unsupported Ni catalyst consists of a Ni(14 13 13) single crystal which has been studied under ultrahigh vacuum conditions. The desorption energy for CO at low CO surface coverage w...... nicely with literature values, providing useful information for identifying active sites on supported Ni catalysts....

  19. New route for synthesis of electrocatalytic Ni (OH) 2 modified ...

    Indian Academy of Sciences (India)

    Immobilization of redox species like Ni(OH)2 onto the electrode surface is important in the application areas such as super capacitor, electrochromic displays and electrocatalysis. Nickel hexacyanoferrate (NiHCF) modified glassy carbon could be further derivatized with Ni(OH)2 by electrochemical cycling in alkali.

  20. Synthesis and characterization of Co–Ni and Fe–Ni alloy nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Solanki, Vandana [Discipline of Natural Sciences, Indian Institute of Information Technology, Design & Manufacturing Jabalpur, Dumna Airport Road, Madhya Pradesh 482005 (India); Lebedev, Oleg I. [Laboratoire CRISMAT, ENSICAEN UMR6508, 6 Bd Maréchal Juin, Cedex 4, Caen 14050 (France); ITMO University, 49 Kronverksky Pr., St. Petersburg 197101 (Russian Federation); Seikh, Md. Motin [Department of Chemistry, Visva-Bharati University, Santiniketan, West Bengal 731235 (India); Mahato, Nihar K. [Discipline of Natural Sciences, Indian Institute of Information Technology, Design & Manufacturing Jabalpur, Dumna Airport Road, Madhya Pradesh 482005 (India); Raveau, Bernard [Laboratoire CRISMAT, ENSICAEN UMR6508, 6 Bd Maréchal Juin, Cedex 4, Caen 14050 (France); Kundu, Asish K., E-mail: asish.k@gmail.com [Discipline of Natural Sciences, Indian Institute of Information Technology, Design & Manufacturing Jabalpur, Dumna Airport Road, Madhya Pradesh 482005 (India)

    2016-12-15

    The magnetic alloy nanoparticles have been synthesized by sol-gel method with a stable Pm-3m cubic structure. The Co–Ni and Fe–Ni alloy nanoparticles are highly crystalline and exhibit preferential low index <111> faceting as determined from HRTEM investigation. TEM images and EDX elemental mapping also confirm the nano-dimensional structure with core-shell structure, where the alloy forms the core and the shell is formed by amorphous carbon. The magnetization results of the alloy nanoparticles confirm the ferromagnetic nature at room temperature akin to their bulk metals with a significant value of field dependent isothermal magnetization at high temperature (390 K). - Highlights: • Synthesis of Co–Ni and Fe–Ni alloy nanoparticles by exploiting low temperature sol–gel process. • The nanoparticles are core–shell type with core ferromagnetic alloys and graphitic carbon shell. • Electron microscope study explains the higher stability at ambient conditions of the nanoparticles.

  1. Thermal stability of electrodeposited Ni and Ni-Co layers; an EBSD-study

    DEFF Research Database (Denmark)

    Rasmussen, Anette Alsted; Gholinia, A.; Trimby, P.W.

    2004-01-01

    The influence of heat treatment on the microstructure and the microtexture of electrodeposited Ni and Ni-Co layers was investigated with Electron Backscatter Diffraction (EBSD) with high resolution. Samples were annealed for 1 hour at 523 K and 673 K, the temperature region wherein recrystallisat......The influence of heat treatment on the microstructure and the microtexture of electrodeposited Ni and Ni-Co layers was investigated with Electron Backscatter Diffraction (EBSD) with high resolution. Samples were annealed for 1 hour at 523 K and 673 K, the temperature region wherein...... recrystallisation occurs. The results are discussed in relation to the resolution of EBSD for the very fine grained electrodeposits and previous X-ray diffracton investigations....

  2. Modelling of rechargeable NiMH batteries

    NARCIS (Netherlands)

    Ledovskikh, A.; Verbitskiy, E.; Ayeb, A.; Notten, P.H.L.

    2003-01-01

    A new mathematical model has been developed for rechargeable NiMH batteries, which is based on the occurring physical–chemical processes inside. This model enables one to simultaneously simulate the battery voltage, internal gas pressures (both PO2 and PH2) and temperature during battery operation.

  3. Ni (II) decorated nano silicoaluminophosphate molecular sieves ...

    Indian Academy of Sciences (India)

    Ni(II) decorated nano silicoaluminophosphate molecular sieves-modified carbon paste electrode as an electrocatalyst for electrooxidation of methanol ... of Science, Babol University of Technology, Babol 47148-71167, Iran; Biofuel & Renewable Energy Research Center, Faculty of Chemical Engineering, Babol University ...

  4. Cancer en los niños

    OpenAIRE

    Pereira, Fabio; Ramírez Wurttenberger, Óscar; Lotero, Viviana; Fundación Valle de Lili

    2004-01-01

    Epidemiología/ ¿Por qué se presenta el cáncer en los niños?/ ¿Cómo se realiza el diagnóstico?/ ¿Cómo es el tratamiento?/ ¿Resultados del tratamiento?/Recomendaciones/Otras formas de tratamiento: El trasplante de médula ósea.

  5. (ii) and ni (ii) complexes with n

    African Journals Online (AJOL)

    DR. AMINU

    II) complexes with a. Schiff base derived from. 4-dimetylamino benzaldehyde and primary amines. The chemical analysis data showed the formation of (1:1) metal - ligand ratio and a square planar geometry was suggested for Co(II) and Ni(II) ...

  6. Dissociative chemisorption of methane on Ni(111)

    NARCIS (Netherlands)

    Krishna Mohan, Gangadharan Prasanna

    2010-01-01

    In this thesis we attempt to understand several aspects of the gas-surface physics/chemistry of (a) the dissociative chemisorption of CH4 on the Ni(111) surface and (b) N2 dissociation over the Ru(0001) surface. Apart from their industrial importance, these systems are regarded as prototypes for

  7. Preparing of Ni-Cu-P Coating

    Science.gov (United States)

    Shumei, Kang

    Ni-Cu-P coating by chemical plating has excellent corrosion resistance,wear resistance, thermal stability and electrical conductivity. In this paper, Ni-Cu-P was prepared by chemical deposition methods, the optimum process of chemical plating Ni-Cu-P. By using scanning electron microscopy(SEM), spectrum analyzer, Autolab workstation on the corrosion resistance of the coating. The results showed that: (1)after the specimen surface chemical plating nickelcopper phosphorus treatment, in the same corrosion potential, the corrosion current density was lower than that of Ni-P coating and substrate materials; (2)had a significant effect on corrosion resistance of quantity of citric acid sodium on nickel copper phosphorus alloy plating, coating corrosion resistance with increasing citric acid sodium content first increased and then decreased, and inaddition level of sodium citrate is 40g/L, the corrosion current density reaches a minimum, 14.51×10-6A/cm2; (3)under the same conditions, the Ni-Cu-P alloy coating pH impact is the biggest,the maximum impedance 1268.05Ω; (4)in the 3.5%NaCl solution, with the change of copper content, the main trend of the corrosion current is decreased first and then increased, and the content of copper in Energy spectrum analysis within 5.18Wt% corrosion current density of a minimum of 14.51×10-6A/cm2, the corrosion resistance. With the increase of Cu content in the coatings, the P content first increased and then decreased in the coating, the content of Ni decreased first and then increased; (5)the best technology:NiSO46H2O, CuSO4 25g/L, 5H2O 0.15g/L, C6H5Na3O7•2H2O 40g/L, NaH2PO2H2O 25g/L, CH3COONa 15g/L, KIO3 0.03g/L, C12H25NaO4SO3 0.01g/L, pH4.75 ± 0.01,temperature 80 ± 1 °C, deposition time of 2h.

  8. Elastic scattering of sup 58 Ni+ sup 64 Ni near the Coulomb barrier

    Energy Technology Data Exchange (ETDEWEB)

    Stefanini, A.M.; Xu Jincheng; Corradi, L.; Montagnoli, G.; Moreno, H.; Nagashima, Y.; Mueller, L.; Narayanasamy, M.; Napoli, D.R.; Spolaore, P. (Istituto Nazionale di Fisica Nucleare, Padua (Italy). Lab. di Legnaro); Beghini, S.; Scarlassara, F.; Segato, G.F.; Soramel, F. (Padua Univ. (Italy). Dipt. di Fisica Istituto Nazionale di Fisica Nucleare, Padua (Italy)); Signorini, C. (Salerno Univ. (Italy). Dipt. di Fisica Istituto Nazionale di Fisica Nucleare, Padua (Italy)); Esbensen, H.; Landowne, S. (Argonne National Lab., IL (USA). Physics Div.); Pollarolo, G. (Turin Univ. (Italy). Dipt. di Fisica Istituto Nazionale di Fisica Nucleare, Turin (Italy))

    1990-04-26

    Elastic scattering angular distributions have been measured for {sup 58}Ni+{sup 64}Ni at three energies around the Coulomb barrier employing a new kinematic coincidence technique. The data are compared with the results of coupled-channels calculations including inelastic excitations as well as one- and two-neutron transfer reactions. The agreement is good and the calculations also agree well with the available transfer and fusion reaction data. (orig.).

  9. Geometric structures of thin film: Pt on Pd(110) and NiO on Ni(100)

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Oden L. [Iowa State Univ., Ames, IA (United States)

    1993-07-01

    This thesis is divided into 3 papers: dynamical low-energy electron- diffraction investigation of lateral displacements in topmost layer of Pd(110); determination of (1x1) and (1x2) structures of Pt thin films on Pd(110) by dynamical low-energy electron-diffraction analysis; and structural determination of a NiO(111) film on Ni(100) by dynamical low-energy electron-diffraction analysis.

  10. Effect of deposition technique of Ni on the perpendicular magnetic anisotropy in Co/Ni multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Akbulut, S., E-mail: sakbulut@gtu.edu.tr [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey); Akbulut, A. [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey); Özdemir, M. [Marmara University, Physics Department, Göztepe, Istanbul (Turkey); Yildiz, F., E-mail: fyildiz@gtu.edu.tr [Gebze Technical University, Physics Department, Istanbul Cad, PK 41400 Gebze/Kocaeli (Turkey)

    2015-09-15

    The perpendicular magnetic anisotropy (PMA) of Si/Pt 3.5/(Co 0.3/Ni 0.6){sub n} /Co 0.3/ Pt 3 (all thicknesses are nm) multilayers were investigated for two different sample sets by using ferromagnetic resonance (FMR) and magnetooptic Kerr effect (MOKE) techniques. In the first sample set all layers (buffer, cap, Co and Ni) were grown by magnetron sputtering technique while in the second sample set Ni sub-layers were grown by molecular beam epitaxy (MBE) at high vacuum. Apart from deposition technique of Ni, all other parameters like thicknesses and growth rates of each layers are same for both sample sets. Multilayers in these two sample sets display PMA in the as grown state until a certain value of bilayer repetition (n) and the strength of PMA decreases with increasing n. Magnetic easy axis's of the multilayered samples switched from film normal to the film plane when n is 9 and 5 for the first and second sample sets, respectively. The reason for that, PMA was decreased due to increasing roughness with increasing n. This was confirmed by X Ray Reflectivity (XRR) measurements for both sample sets. Moreover, in the first sample set coercive field values are smaller than the second sample set, which means magnetic anisotropy is lower than the latter one. This stronger PMA is arising due to existence of stronger Pt (111) and Co/Ni (111) textures in the second sample set. - Highlights: • Effect of deposition techniques for Ni sub-layers on magnetic properties in [Co/Ni]{sub n} multilayered films was studied. • Ni sub-layers were deposited by two different techniques, molecular beam epitaxy (MBE) and magnetron sputtering. • Spin reorientation thickness and magnitude of the anisotropy are strongly depending on growing techniques.

  11. Epitaxial NiWO4 films on Ni(110): Experimental and theoretical study of surface stability

    Science.gov (United States)

    Doudin, N.; Pomp, S.; Blatnik, M.; Resel, R.; Vorokhta, M.; Goniakowski, J.; Noguera, C.; Netzer, F. P.; Surnev, S.

    2017-05-01

    Despite the application potential of nickel tungstate (NiWO4) in heterogeneous catalysis, humidity and gas sensing, etc, its surfaces have essentially remained unexplored. In this work, NiWO4 nanoparticles and films with the wolframite structure have been grown via a solid-state reaction of (WO3)3 clusters and a NiO(100) film on a Ni(110) crystal surface and characterized by a variety of experimental techniques, including x-ray photoelectron spectroscopy (XPS), scanning tunneling microscopy (STM) and x-ray diffraction (XRD), combined with ab-initio density functional theory (DFT) calculations. NiWO4 grows initially as three-dimensional (3D) crystalline nanoparticles displaying mainly two crystalline facets vicinal to the (100) surface, which merge with increasing the (WO3)3 coverage into a quasi-continuous epitaxial film. The DFT results provide an account of the energetics of NiWO4 low index surfaces and highlight the role of faceting in the stabilization of extended polar (100) terraces. These combined experimental and theoretical results show that interaction with a metal substrate and vertical confinement may stabilize oxide nano-objects with high energy facets, able to enhance their reactivity.

  12. Weldability of spheroidal graphite ductile cast iron using Ni / Ni-Fe electrodes

    Directory of Open Access Journals (Sweden)

    Pascual, M.

    2009-10-01

    Full Text Available Weldability of spheroidal graphite ductile cast iron was established using a cheap Ni-Fe and a high purity Ni electrode. A preheating treatment at 350 °C and an annealing treatment at 850 °C were carried out to improve mechanical properties of welded pieces. The pure Ni electrode showed graphite diffusion in the bead with a uniform distribution of phases, improving weldability and decreasing fragility. Preheating and annealing treatments increased ductility and improved weldability.

    Se establece la soldabilidad de funciones dúctiles de grafito según las características mecánicas alcanzadas, utilizando un electrodo puro de Ni mientras se compara con uno más económico de Ni-Fe. Diferentes tratamientos t��rmicos son propuestos y analizados. El electrodo de Ni puro mostró difusión de grafito desde el material original al cordón de soldadura, dando como resultado una fase homogénea que mejoró la soldabilidad y redujo la fragilidad. Un pre tratamiento a 350 °C y un recocido a 850 °C incrementaron la ductilidad y mejoró la soldabilidad.

  13. Cold Spray Deposition of Ni and WC-Reinforced Ni Matrix Composite Coatings

    Science.gov (United States)

    Alidokht, S. A.; Vo, P.; Yue, S.; Chromik, R. R.

    2017-09-01

    Ni-WC composites are ideal protective coatings against wear and are often fabricated using laser cladding and thermal spray processes, but the high temperatures of these processes result in decarburization, which deteriorates the performance of the coating. Cold spray has the potential to deposit Ni-WC composite coatings and retain the composition of the initial WC feedstock. However, the insignificant plastic deformation of hard WC particles makes it difficult to build up a high WC content coating by cold spray. By using three different WC powder sizes, the effect of feedstock powder size on WC retention was tested. To improve WC retention, a WC/Ni composite powder in mixture with Ni was also sprayed. Microstructural characterization, including the deformed structure of Ni splats, retention, distribution, and fragmentation of WC, was performed by scanning electron microscopy. An improvement in WC retention was achieved using finer WC particles. Significant improvement in WC particles retention was achieved using WC/Ni composite powder, with the WC content in the coating being close to that of the feedstock.

  14. Interfacial reaction of Ni{sub 3}Sn{sub 4} intermetallic compound in Ni/SnAg solder/Ni system under thermomigration

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yi-Shan; Yang, Chia-Jung; Ouyang, Fan-Yi, E-mail: fyouyang@ess.nthu.edu.tw

    2016-07-25

    The growth of Ni{sub 3}Sn{sub 4} intermetallic compound (IMC) between liquid–solid interface in micro-scale Ni/SnAg/Ni system was investigated under a temperature gradient of 160 °C/cm at 260 °C on a hot plate. In contrast to a symmetrical growth of Ni{sub 3}Sn{sub 4} on both interfaces under isothermally annealed at 260 °C, the interfacial Ni{sub 3}Sn{sub 4} IMC exhibited asymmetric growth under a temperature gradient; the growth of Ni{sub 3}Sn{sub 4} at cold interface was faster than that at hot side because of temperature gradient induced mass migration of Ni atoms from the hot end toward the cold end. It was found that two-stage growth behavior of Ni{sub 3}Sn{sub 4} IMC under a temperature gradient. A growth model was established and growth kinetic analysis suggested that the chemical potential gradient controlled the growth of Ni{sub 3}Sn{sub 4} at stage I (0–120 min) whereas the dynamic equilibrium between chemical potential gradient and temperature gradient forces was attained at the hot end at stage II (120–210 min). When dynamic equilibrium was achieved at 260 °C, the critical length-temperature gradient product at the hot end was experimentally estimated to be 489.18 μm × °C/cm and the moving velocity of Ni{sub 3}Sn{sub 4} interface due to Ni consumption was calculated to be 0.134 μm/h. The molar heat of transport (Q*) of Ni atoms in molten SnAg solder was calculated to be +0.76 kJ/mol. - Highlights: • Interfacial reaction in Ni/SnAg solder/Ni system under thermal gradient. • Growth rate of Ni{sub 3}Sn{sub 4} at cold end is faster than that at hot end. • Critical length-temperature gradient product at hot end is 489.2 μm°C/cm at 260 °C. • Velocity of Ni{sub 3}Sn{sub 4} moving interface is 0.134 μm/h during dynamic equilibrium. • Molar heat of transport (Q*) of Ni in molten SnAg was +0.76 kJ/mol.

  15. Microstructure, Mechanical Property, and Phase Transformation of Quaternary NiTiFeNb and NiTiFeTa Shape Memory Alloys

    National Research Council Canada - National Science Library

    Yulong Liang; Shuyong Jiang; Yanqiu Zhang; Junbo Yu

    2017-01-01

    Based on ternary Ni45Ti51.8Fe3.2 (at %) shape memory alloy (SMA), Nb and Ta elements are added to an NiTiFe SMA by replacing Ni element, and consequently quaternary Ni44Ti51.8Fe3.2Nb1 and Ni44Ti51.8Fe3.2Ta1...

  16. Evaluation of the Antitumor Activity by Ni Nanoparticles with Verbascoside

    Directory of Open Access Journals (Sweden)

    Mingyue Chen

    2013-01-01

    Full Text Available Verbascoside (VB has attracted a great deal of attention due to ITS pharmacological properties. In our study, we synthesized a multifunctional verbascoside coated Ni nanoparticles (VB-Ni. Transmission electron microscopy (TEM and high performance liquid chromatography (HPLC display the characteristics of VB-Ni nanoparticles. Compared with VB, VB-Ni has been proven to induce apoptosis and resist the growth of doxorubicin-resistant K562 cells in vitro and in vivo. Thus, VB-Ni nanoparticles can be thought of as an ideal mode of cancer treatment.

  17. Atomistic modeling of ternary additions to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt and Ni-Ti-Hf shape memory alloys

    Energy Technology Data Exchange (ETDEWEB)

    Mosca, H.O., E-mail: hmosca@cnea.gov.ar [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Bozzolo, G. [Loyola University Maryland, 4501 N. Charles St., Baltimore, MD 21210 (United States); Grosso, M.F. del [Gcia. Investigacion y Aplicaciones, CNEA, Av. Gral Paz 1499, B1650KNA San Martin (Argentina); GCMM, UTN, FRG Pacheco, Av. H. Yrigoyen 288, Gral. Pacheco (Argentina); Consejo Nacional de Investigaciones Cientificas y Tecnicas, CONICET (Argentina)

    2012-08-15

    The behavior of ternary and quaternary additions to NiTi shape memory alloys is investigated using a quantum approximate method for the energetics. Ternary additions X to NiTi and quaternary additions to Ni-Ti-Pd, Ni-Ti-Pt, and Ni-Ti-Hf alloys, for X=Au, Pt, Ir, Os, Re, W, Ta,Ag, Pd, Rh, Ru, Tc, Mo, Nb, Zr, Zn, Cu, Co, Fe, Mn, V, Sc, Si, Al and Mg are considered. Bulk properties such as lattice parameter, energy of formation, and bulk modulus of the B2 alloys are studied for variations due to the presence of one or two simultaneous additives.

  18. Nanoporous PdNi/C electrocatalyst prepared by dealloying high-Ni-content PdNi alloy for formic acid oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wei; Wang, Hui; Wang, Rongfang [Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education of China, Key Laboratory of Gansu Polymer Materials, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Ji, Shan [South African Institute for Advanced Materials Chemistry, University of the Western Cape, Cape Town 7535 (South Africa)

    2012-12-15

    To improve the electrochemical performance of Pd-based catalysts for formic acid oxidation, a carbon supported nanoporous PdNi catalyst is prepared by dealloying high-Ni-content PdNi alloy nanoparticles in acid solution. The structure of nanoporous PdNi/C catalyst is characterized by X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. The electrocatalytic results show that the activity of the nanoporous PdNi/C catalyst is higher than that of nonporous Pd/C catalyst. The results demonstrate that the carbon-supported nanoporous PdNi catalyst has a potential for application in direct formic acid fuel cells. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  19. State of Supported Nanoparticle Ni during Catalysis in Aqueous Media

    Energy Technology Data Exchange (ETDEWEB)

    Chase, Zizwe; Vjunov, Aleksei; Fulton, John; Camaioni, Donald; Balasubramanian, Mahalingam; Lercher, Johannes

    2015-11-09

    The state of Ni supported on HZSM-5 zeolite, silica, and sulfonated carbon was studied during aqueous-phase catalysis of phenol hydrodeoxygenation using in situ extended X-ray absorption fine structure spectroscopy. On sulfonated carbon and HZSM-5 supports, NiO and Ni(OH)(2) were readily reduced to Ni-0 under reaction conditions (approximate to 35bar H-2 in aqueous phenol solutions containing up to 0.5wt.% phosphoric acid at 473K). In contrast, Ni supported on SiO2 was not stable in a fully reduced Ni-0 state. Water enables the formation of Ni-II phyllosilicate, which is more stable, that is, difficult to reduce, than either -Ni(OH)(2) or NiO. Leaching of Ni from the supports was not observed over a broad range of reaction conditions. Ni-0 particles on HZSM-5 were stable even in presence of 15wt.% acetic acid at 473K and 35bar H-2.

  20. Intra-specific variation in Ni tolerance, accumulation and translocation patterns in the Ni-hyperaccumulator Alyssum lesbiacum.

    Science.gov (United States)

    Adamidis, G C; Aloupi, M; Kazakou, E; Dimitrakopoulos, P G

    2014-01-01

    A hydroponic experiment was conducted to investigate inter-population variation in Ni tolerance, accumulation and translocation patterns in Alyssum lesbiacum. The in vitro results were compared to field data (soil bioavailable and leaf Ni concentrations) so as to examine any potential relationship between hydroponic and natural conditions. Seeds from the four major existing populations of A. lesbiacum were used for the cultivation of plantlets in solution cultures with incrementally increasing Ni concentrations (ranging from 0 to 250 μmol L(-1) NiSO4). Ni accumulation and tolerance of shoots and roots, along with initial seed Ni concentration for each population were measured. The ratio of root or shoot length of plantlets grown in NiSO4 solutions to root or shoot lengths of plantlets grown in the control solution was used as tolerance index. For the range of metal concentrations used, A. lesbiacum presented significant inter-population variation in Ni tolerance, accumulation and translocation patterns. Initial seed Ni concentration was positively correlated to shoot Ni accumulation. A significant positive relationship between tolerance and accumulation was demonstrated. Initial seed Ni concentration along with physiological differences in xylem loading and Ni translocation of each population, appear to be the determining factors of the significant inter-population variation in Ni tolerance and accumulation. Our results highlight the inter-population variation in Ni tolerance and accumulation patterns in the Ni-hyperaccumulator A. lesbiacum and give support to the suggestion that the selection of metal hyperaccumulator species with enhanced phytoremediation efficiency should be considered at the population level. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. NiCo2S4 nanosheet-decorated 3D, porous Ni film@Ni wire electrode materials for all solid-state asymmetric supercapacitor applications.

    Science.gov (United States)

    Saravanakumar, Balasubramaniam; Jayaseelan, Santhana Sivabalan; Seo, Min-Kang; Kim, Hak-Yong; Kim, Byoung-Suhk

    2017-12-07

    Wire type supercapacitors with high energy and power densities have generated considerable interest in wearable applications. Herein, we report a novel NiCo2S4-decorated 3D, porous Ni film@Ni wire electrode for high performance supercapacitor application. In this work, a facile method is introduced to fabricate a 3D, porous Ni film deposited on a Ni wire as a flexible electrode, followed by decoration with NiCo2S4 as an electroactive material. The fabricated NiCo2S4-decorated 3D, porous Ni film@Ni wire electrode displays a superior performance with an areal and volumetric capacitance of 1.228 F cm-2 and 199.74 F cm-3, respectively, at a current density of 0.2 mA cm-1 with a maximum volumetric energy and power density (EV: 6.935 mW h cm-3; PV: 1.019 W cm-3). Finally, the solid state asymmetric wire type supercapacitor is fabricated using the fabricated NiCo2S4-decorated 3D, porous Ni film@Ni wire as a positive electrode and N-doped reduced graphene oxide (N-rGO) as a negative electrode and this exhibits good areal and volumetric capacitances of CA: 0.12 F cm-2 and CV: 19.57 F cm-2 with a higher rate capability (92%). This asymmetric wire type supercapacitor demonstrates a low leakage current and self-discharge with a maximum volumetric energy (EV: 5.33 mW h cm-3) and power (PV: 855.69 mW cm-3) density.

  2. Martensitic Transformation in Ni-Mn-Sn-Co Heusler Alloys

    Directory of Open Access Journals (Sweden)

    Alexandre Deltell

    2015-04-01

    Full Text Available Thermal and structural austenite to martensite reversible transition was studied in melt spun ribbons of Ni50Mn40Sn5Co5, Ni50Mn37.5Sn7.5Co5 and Ni50Mn35Sn10Co5 (at. % alloys. Analysis of X-ray diffraction patterns confirms that all alloys have martensitic structure at room temperature: four layered orthorhombic 4O for Ni50Mn40Sn5Co5, four layered orthorhombic 4O and seven-layered monoclinic 14M for Ni50Mn37.5Sn7.5Co5 and seven-layered monoclinic 14M for Ni50Mn35Sn5Co5. Analysis of differential scanning calorimetry scans shows that higher enthalpy and entropy changes are obtained for alloy Ni50Mn37.5Sn7.5Co5, whereas transition temperatures increases as increasing valence electron density.

  3. Structural and magnetic properties of Ni-Zn and Ni-Zn-Co ferrites

    Energy Technology Data Exchange (ETDEWEB)

    Knyazev, A.V., E-mail: knyazevav@gmail.com [N.I. Lobachevsky State University of Nizhni Novgorod, Gagarin Prospekt 23/2, 603950 Nizhni Novgorod (Russian Federation); Zakharchuk, I.; Lähderanta, E. [Lappeenranta University of Technology, P.O. Box 20, FI-53851 Lappeenranta (Finland); Baidakov, K.V.; Knyazeva, S.S. [N.I. Lobachevsky State University of Nizhni Novgorod, Gagarin Prospekt 23/2, 603950 Nizhni Novgorod (Russian Federation); Ladenkov, I.V. [Joint-stock Company “Research and Production Company “Salut”, Nizhni Novgorod (Russian Federation)

    2017-08-01

    Highlights: • Ni-Zn and Ni-Zn-Co ferrite powders were prepared by the solid-state reaction at 1073 K. • The room temperature saturation magnetizations are 59.7 emu/g for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} and 57.1 emu/g for Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 2}O{sub 4}. • The coercivity of the samples is found to be much larger than that of bulk ferrites and increases with Co introduction. • The temperature dependences of magnetization exhibit large spin frustration and spin-glass-like behavior. - Abstract: Ni-Zn and Ni-Zn-Co ferrite powders with nominal compositions Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} and Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 2}O{sub 4} were prepared by the solid-state reaction synthesis with periodic regrinding during the calcination at 1073 K. The structure of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} and Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 2}O{sub 4} was refined assuming space group F d-3m. Scanning electron microscopy revealed the average sizes of the crystalline ferrite particles are 130–630 nm for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} and 140–350 nm for Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 2}O{sub 4}. The room temperature saturation magnetizations are 59.7 emu/g for Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} and 57.1 emu/g for Ni{sub 0.5}Zn{sub 0.3}Co{sub 0.2}Fe{sub 2}O{sub 4}. The coercivity of the samples is found to be much larger than that of bulk ferrites and increases with Co introduction. The Curie temperature tends to increase upon Zn substitution by Co, as well. The temperature dependences of magnetization measured using zero-field cooled and field cooled protocols exhibit large spin frustration and spin-glass-like behavior.

  4. Peculiarities of thermoelectric half-Heusler phase formation in Gd-Ni-Sb and Lu-Ni-Sb ternary systems

    Energy Technology Data Exchange (ETDEWEB)

    Romaka, V.V., E-mail: romakav@lp.edu.ua [Department of Applied Material Science and Materials Engineering, Lviv Polytechnic National University, Ustyyanovycha Str. 5, 79013 Lviv (Ukraine); Romaka, L.; Horyn, A. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya str. 6, 79005 Lviv (Ukraine); Rogl, P. [Institute of Materials Chemistry and Research, University of Vienna, Währingerstrasse 42, A-1090 Wien (Austria); Stadnyk, Yu; Melnychenko, N. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya str. 6, 79005 Lviv (Ukraine); Orlovskyy, M.; Krayovskyy, V. [Department of Applied Material Science and Materials Engineering, Lviv Polytechnic National University, Ustyyanovycha Str. 5, 79013 Lviv (Ukraine)

    2016-07-15

    The phase equilibria in the Gd–Ni–Sb and Lu-Ni-Sb ternary systems were studied at 873 K by X-ray and metallographic analyses in the whole concentration range. The interaction of the elements in the Gd–Ni–Sb system results the formation of five ternary compounds at investigated temperature: Gd{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), Gd{sub 5}NiSb{sub 2} (Yb{sub 5}Sb{sub 3}-type), GdNiSb (MgAgAs-type), Gd{sub 3}Ni{sub 6}Sb{sub 5} (Y{sub 3}Ni{sub 6}Sb{sub 5}-type), and GdNi{sub 0.72}Sb{sub 2} (HfCuSi{sub 2}-type). At investigated temperature the Lu-Ni-Sb system is characterized by formation of the LuNiSb (MgAgAs-type), Lu{sub 5}Ni{sub 2}Sb (Mo{sub 5}SiB{sub 2}-type), and Lu{sub 5}Ni{sub 0.56}Sb{sub 2.44} (Yb{sub 5}Sb{sub 3}-type) compounds. The disordering in the crystal structure of half-Heusler GdNiSb and LuNiSb was revealed by EPMA and studied by means of Rietveld refinement and DFT modeling. The performed electronic structure calculations are in good agreement with electrical transport property studies. - Graphical abstract: Crystal structure model and electron localization function of Lu{sub 5}Ni{sub 2}Sb. Display Omitted - Highlights: • Gd-Ni-Sb and Lu-Ni-Sb phase diagrams were constructed at 873 K. • GdNiSb and LuNiSb are characterized by disordered crystal structure. • Crystal structure optimization with DFT calculations confirmed crystal structure disorder in GdNiSb and LuNiSb.

  5. Structural characterization of Ni and Ni/Ti ohmic contact on n-type 4H-SiC

    Energy Technology Data Exchange (ETDEWEB)

    Siad, M., E-mail: siadmenouar@yahoo.fr [Centre de Recherche Nucleaire d' Alger, 02 Bd Frantz Fanon (Algeria); Abdesselam, M. [USTHB, Faculte de Physique, BP 32, El Alia, Bab Ezzouar (Algeria); Souami, N. [Centre de Recherche Nucleaire d' Alger, 02 Bd Frantz Fanon (Algeria); Chami, A.C. [USTHB, Faculte de Physique, BP 32, El Alia, Bab Ezzouar (Algeria)

    2011-10-01

    In this study, we report on the structural characterization of Ni layer and Ni/Ti bilayer contacts on n-type 4H-SiC. The resulting Ni-silicides and the redistribution of carbon, after annealing at 950 deg. C, in the Ni/SiC and the Ni/Ti/SiC contacts are particularly studied by Rutherford Backscattering Spectrometry (RBS) at E{sub {alpha}} = 3.2 MeV, nuclear reaction analysis (NRA) at E{sub d} = 1 MeV, scanning electron microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDS) techniques.

  6. Evaluation of structure and mechanical properties of Ni-rich NiTi/Kapton composite film

    Energy Technology Data Exchange (ETDEWEB)

    Mohri, Maryam [Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Nili-Ahmadabadi, Mahmoud [School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); PouryazdanPanah, Mohsen; Hahn, Horst [Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Joint Research Labaratory Nanomaterials, Technische Universität Darmstadt, Darmstadt (Germany)

    2016-06-21

    NiTi thin films are usually sputtered on silicon wafers by magnetron sputtering. But the systems composed of thin film on flexible polymeric substrate are used in many applications such as micro electro-mechanical systems (MEMS). Investigation on mechanical properties of thin films has attracted much attention due to their widespread applications. In this paper, the mechanical properties of 1 µm-thick crystallized Ni-49.2 at%Ti thin film alloy deposited by DC magnetron sputtering on Kapton substrate are investigated by using tensile test. The as-deposited thin films are in amorphous state, then for crystallization, the thin film was annealed at 450 °C for 30 min. Formation of the austenite phase after annealing was confirmed by X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The surface morphology of as deposited and crystallized thin films were examined by scanning electron microscopy (SEM). Stress-strain curves of the NiTi alloy thin film were obtained by subtracting of the stress-strain Kapton curves from the corresponding curves of the NiTi/Kapton composite. The XRD results revealed that the NiTi thin film deposited on the Kapton is austenitic and presents super-elastic effect at room temperature. This pseudo elastic effect leads to more recoverable strain in NiTi/Kapton composite film compared with Kapton foils on loading/unloading test. Furthermore, it was concluded that nanostructure of the NiTi thin film is responsible for remarkable improvement of ultimate tensile strength (1.4 GPa) at a strain of 30% compared with the bulk material.

  7. Mechanical alloying of Ni{sub 3}Fe in the presence of Ni{sub 3}Fe nanocrystalline germs

    Energy Technology Data Exchange (ETDEWEB)

    Sparchez, Z. [Materials Sciences and Technology Department, Technical University of Cluj-Napoca, 103-105 Muncii Avenue, 400641 Cluj-Napoca (Romania); Chicinas, I. [Materials Sciences and Technology Department, Technical University of Cluj-Napoca, 103-105 Muncii Avenue, 400641 Cluj-Napoca (Romania) and Laboratoire de Cristallographie, CNRS, associe a l' Universite J. Fourier, BP 166, F-38042 Grenoble Cedex 9 (France)]. E-mail: Ionel.Chicinas@stm.utcluj.ro; Isnard, O. [Laboratoire de Cristallographie, CNRS, associe a l' Universite J. Fourier, BP 166, F-38042 Grenoble Cedex 9 (France); Pop, V. [Faculty of Physics, Babes-Bolyai University, 400084 Cluj-Napoca (Romania); Popa, F. [Materials Sciences and Technology Department, Technical University of Cluj-Napoca, 103-105 Muncii Avenue, 400641 Cluj-Napoca (Romania); Laboratoire de Cristallographie, CNRS, associe a l' Universite J. Fourier, BP 166, F-38042 Grenoble Cedex 9 (France)

    2007-05-31

    The influence of nanocrystalline germs on the production of the Ni{sub 3}Fe intermetallic compound by mechanical alloying is reported. These germs consist in Ni{sub 3}Fe nanocrystalline particles previously obtained by mechanical alloying which have been added to the Ni-Fe mixture: 0.8(3Ni + Fe) + 0.2Ni{sub 3}Fe = Ni{sub 3}Fe. The powder mixture was milled in a planetary mill in argon atmosphere. Several milling times have been used ranging from 2 to 8 h. A Ni-Fe mixture at nominal composition of Ni{sub 3}Fe compound was milled in the same conditions, as blind samples. A heat treatment at 350 {sup o}C for 0.5, 1, 2 and 4 h has been performed in order to remove the internal stresses induced by milling and to improve the solid-state reaction. The formation of the Ni{sub 3}Fe phase was checked by X-ray diffraction and magnetic measurements. The germs inoculation improves the synthesis of the Ni{sub 3}Fe phase by combined mechanical alloying and annealing technique. This influence is more effective for short milling times (typically lower than 4 h). For samples milled more than 4 h the influence of the germs inoculation is more reduced, due to the Ni{sub 3}Fe germs self-formation by milling.

  8. Preparation of Ni-YSZ Cermet through Reduction of NiO-YSZ Ceramic for SOFC Anode

    Science.gov (United States)

    Baity, P. S. N.; Budiana, B.; Suasmoro, S.

    2017-07-01

    Research on the synthesis of Nickel-Yttria Stabilized Zirconia (Ni-YSZ) cermet for Solid Oxide Fuel Cell (SOFC) anode has been performed. The preparation was carried out through the reduction process of the Nickel Oxide-Yttria stabilized Zirconia (NiO-YSZ) ceramic. NiO and YSZ were prepared separately, the NiO powder was prepared by calcination of CH4Ni3O7.xH2O at 500°C for 3 hours, while YSZ powder was prepared by calcination of 7mol% Y2O3 and 93mol% ZrO2 mixture at 1350°C for an hour. The NiO-YSZ ceramic preparation was carried outby mixing of YSZ and NiO powder with natural white starch by weight ratio NiO: YSZ: natural white starch = 4:6:1 followed by sintering at 1200°C for 4 hours. The completion of reduction process of NiO-YSZ ceramic was performed at 1000°C in flowing Argon (Ar) containing 10% Hydrogen (H2) up to 4 hours. The characterisations include thermogravimetric analysis (TGA), XRD, SEM-EDX and Impedance Analyzer meter. The synthesised Ni-YSZ cermet at composition 33wt% Ni and 67wt% YSZ, shows relative density 70% and electrical conductivity 10-2 S/cm at 700°C, it qualifies as anode for SOFC.

  9. Microwave assisted synthesis and characterization of Ni/NiO nanoparticles as electrocatalyst for methanol oxidation in alkaline solution

    Science.gov (United States)

    Arunachalam, Prabhakarn; Ghanem, Mohamed A.; Al-Mayouf, Abdullah M.; Al-shalwi, Matar; Hamed Abd-Elkader, Omar

    2017-02-01

    Nickel/Nickel oxide (Ni/NiO) nanoparticles catalyst is prepared by microwave-assisted liquid-phase deposition using ethylene glycol (EG) and water mixture under atmospheric conditions. The physicochemical characterizations of the catalyst carried out by surface area analyzer, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), electron microscopes measurements suggest the formation of crystalline nanoparticles structure of NiO. The surface area of Ni/NiO prepared using EG/water mixture reaches 70 m2 g-1 which is 2-fold enhsancement in surface area in comparison with NiO prepared in pure EG and an order of magnitude higher than that of bulk nickel prepared in pure water. The methanol electro-oxidation activity of the Ni/NiO nanoparticles obtained in EG/water mixture displayed more than 4-fold increase in oxidation current at 1.7 V versus RHE in comparison with NiO nanoparticles obtained in EG and 20-fold increase compared to bulk nickel catalyst concord with the enhancement of electro-active surface area. The results show the Ni/NiO nanoparticles produced by microwave assisted synthesis has superior activity for methanol oxidation in alkaline solution over the other nickel based catalysts and has potential for mass production.

  10. Role of Ni-tolerant Bacillus spp. and Althea rosea L. in the phytoremediation of Ni-contaminated soils.

    Science.gov (United States)

    Khan, Waheed Ullah; Yasin, Nasim Ahmad; Ahmad, Sajid Rashid; Ali, Aamir; Ahmed, Shakil; Ahmad, Aqeel

    2017-05-04

    In our current study, four nickel-tolerant (Ni-tolerant) bacterial species viz, Bacillus thuringiensis 002, Bacillus fortis 162, Bacillus subtilis 174, and Bacillus farraginis 354, were screened using Ni-contaminated media. The screened microbes exhibited positive results for synthesis of indole acetic acid (IAA), siderophore production, and phosphate solubilization. The effects of these screened microbes on Ni mobility in the soil, root elongation, plant biomass, and Ni uptake in Althea rosea plants grown in Ni-contaminated soil (200 mg Ni kg(-1)) were evaluated. Significantly higher value for water-extractable Ni (38 mg kg(-1)) was observed in case of Ni-amended soils inoculated with B. subtilis 174. Similarly, B. thuringiensis 002, B. fortis 162, and B. subtilis 174 significantly enhanced growth and Ni uptake in A. rosea. The Ni uptake in the shoots and roots of B. subtilis 174-inoculated plants enhanced up to 1.7 and 1.6-fold, respectively, as compared to that in the un-inoculated control. Bacterial inoculation also significantly improved the root and shoot biomass of treated plants. The current study presents a novel approach for bacteria-assisted phytoremediation of Ni-contaminated areas.

  11. High Damping of Lightweight TiNi-Ti2Ni Shape Memory Composites for Wide Temperature Range Usage

    Science.gov (United States)

    Yang, Bing; Luo, Zheng; Yuan, Bin; Liu, Jiangwen; Gao, Yan

    2017-10-01

    A bimodal porous TiNi-Ti2Ni shape memory alloy composite (SMAC) with 59% porosity was fabricated by sintering Ti-46at.%Ni elemental powders with pore-forming agent. The porous TiNi-Ti2Ni SMAC contains two irregular pores of about 400 and 120 μm. We investigated the microstructure and pore morphology correlated with the mechanical properties and damping capacities of the SMAC. Ti2Ni intermetallic phases with size of 1-3 μm were homogeneously distributed in the TiNi matrix. The porous TiNi-Ti2Ni SMAC exhibits exceptionally high inverse mechanical quality factor ( Q -1) of 0.25 at < 40 °C, which is among the highest value reported for porous/dense shape memory alloys or composites to best of our knowledge, and it shows very high compressive fracture strain of about 25%. Moreover, the fabricated porous SMAC at relatively low strain amplitude can exhibit considerable high Q -1 of 0.06 0.11 for a wide range of temperature between - 90 and 200 °C, which is attributed to the stress concentration distribution provided by the bimodal structure of pores and the massive interfaces between pore/matrix and TiNi/Ti2Ni. These porous SMACs can be an ideal candidate for using as a lightweight damping material in the energy-saving applications.

  12. Anti-corrosive and anti-microbial properties of nanocrystalline Ni-Ag coatings

    Energy Technology Data Exchange (ETDEWEB)

    Raghupathy, Y.; Natarajan, K.A.; Srivastava, Chandan, E-mail: csrivastava@materials.iisc.ernet.in

    2016-04-15

    Graphical abstract: - Highlights: • Electrodeposition yielded phase-segregated, nanocrystalline Ni-Ag coatings. • Ni-Ag alloys exhibited smaller Ni crystals compared to pure Ni. • Ultra fine Ni grains of size 12–14 nm favoured Ni-Ag solid solution. • Nanocrystalline Ag resisted bio-fouling by Sulphate Reducing bacteria. • Ni-Ag outperformed pure Ni in corrosion and bio-corrosion tests. - Abstract: Anti-corrosive and anti-bacterial properties of electrodeposited nanocrystalline Ni-Ag coatings are illustrated. Pure Ni, Ni-7 at.% Ag, & Ni-14 at.% Ag coatings were electrodeposited on Cu substrate. Coating consisted of Ni-rich and Ag-rich solid solution phases. With increase in the Ag content, the corrosion resistance of the Ni-Ag coating initially increased and then decreased. The initial increase was due to the Ni-Ag solid solution. The subsequent decrease was due to the increased galvanic coupling between the Ag-rich and Ni-rich phases. For all Ag contents, the corrosion resistance of the Ni-Ag coating was higher than the pure Ni coating. Exposure to Sulphate Reducing Bacteria (SRB) revealed that the extent of bio-fouling decreased with increase in the Ag content. After 2 month exposure to SRB, the Ni-Ag coatings demonstrated less loss in corrosion resistance (58% for Ni-7 at.% Ag and 20% for Ni-14 at.% Ag) when compared pure Ni coating (115%).

  13. Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation

    Science.gov (United States)

    Kang, Jian; Wang, Rongfang; Wang, Hui; Liao, Shijun; Key, Julian; Linkov, Vladimir; Ji, Shan

    2013-01-01

    Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C), were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), and methanol oxidation activity compared using CV and chronoamperometry (CA). While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous)/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells. PMID:28811402

  14. Effect of Ni Core Structure on the Electrocatalytic Activity of Pt-Ni/C in Methanol Oxidation

    Directory of Open Access Journals (Sweden)

    Vladimir Linkov

    2013-07-01

    Full Text Available Methanol oxidation catalysts comprising an outer Pt-shell with an inner Ni-core supported on carbon, (Pt-Ni/C, were prepared with either crystalline or amorphous Ni core structures. Structural comparisons of the two forms of catalyst were made using transmission electron microscopy (TEM, X-ray diffraction (XRD and X-ray photoelectron spectroscopy (XPS, and methanol oxidation activity compared using CV and chronoamperometry (CA. While both the amorphous Ni core and crystalline Ni core structures were covered by similar Pt shell thickness and structure, the Pt-Ni(amorphous/C catalyst had higher methanol oxidation activity. The amorphous Ni core thus offers improved Pt usage efficiency in direct methanol fuel cells.

  15. Hard X-ray MCD in GdNi/sub 5/ and TbNi/sub 5/ single crystals

    CERN Document Server

    Galera, R M

    1999-01-01

    XMCD experiments have been performed at the R L/sub 2,3/ and Ni K- edges on magnetically saturated single crystals of GdNi/sub 5/ and Tb Ni/sub 5/ ferromagnetic compounds. The spectra present huge and well structured dichroic $9 signals at both the R L/sub 2,3/ and the Ni K- edges. Structures from the quadrupolar (2p to 4f) transitions are clearly observed at the R L/sub 2,3/-edges. Though Ni is not magnetic, large intensities, up to 0.4, are measured at the $9 Ni K- edge. The Ni K-edge XMCD shows a three-peak structure which intensities dependent on the rare earth. (7 refs).

  16. Shell-ferromagnetism in Ni-Mn-based Heuslers in view of ductile Ni-Mn-Al

    Directory of Open Access Journals (Sweden)

    A. Çakır

    2017-05-01

    Full Text Available The present work deals with magnetic and structural phase instabilities in Ni-Mn-based Heusler alloys especially Ni-Mn-Al. The temper-annealed Ni50Mn45Al5 Heusler alloy decomposes into the full stoichiometric Ni2MnAl and NiMn phases. The decomposed stoichiometric Heusler forms precipitates in an anti-ferromagnetic NiMn matrix and exhibits shell-ferromagnetic properties when the temper-annealing is performed under magnetic field. The shell-ferromagnetism results from the magnetic proximity effect and is observed as vertically shifted magnetization loops. The presence of this property in Ni50Mn45Al5 adds the possibility of having a ductile material while preserving the shell-ferromagnetic properties.

  17. Ni{sub 3}Al technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Sikka, V.K.; Viswanathan, S.; Santella, M.L. [Oak Ridge National Lab., TN (United States)] [and others

    1997-04-01

    Ductile Ni{sub 3}Al and Ni{sub 3}Al-based alloys have been identified for a range of applications. These applications require the use of material in a variety of product forms such as sheet, plate, bar, wire, tubing, piping, and castings. Although significant progress has been made in the melting, casting, and near-net-shape forming of nickel aluminides, some issues still remain. These include the need for: (1) high-strength castable composition for many applications that have been identified; (2) castability (mold type, fluidity, hot-shortness, porosity, etc.); (3) weld reparability of castings; and (4) workability of cast or powder metallurgy product to sheet, bar, and wire. The four issues listed above can be {open_quotes}show stoppers{close_quotes} for the commercial application of nickel aluminides. This report describes the work completed to address some of these issues during FY 1996.

  18. Niño, inteligencia, devenir

    OpenAIRE

    Galindo Olaya, Juan Diego

    2016-01-01

    En este artículo nos proponemos mostrar cómo actúan en conjunto el plano de organización y el plano de consistencia que conforman el mapa del pensamiento en la escuela, según el cual, se puede afirmar que el pensamiento se escapa a la inhibición, la interpretación y la sujeción que provoca su traducción en términos de inteligencia, cuando, como resultado de la experimentación, se gesta un encuentro indeterminado con fuerzas que pueden conducir al devenir-niño del niño en la escuela. En este s...

  19. Internal chlorination of Ni-Cr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Berztiss, D.; Hennesen, K.; Grabke, H.J. [Max-Planck-Institut fuer Eisenforschung GmbH, Duesseldorf (Germany)

    1998-12-31

    In contrast to internal oxidation, sulfidation and carburization, very little information is available regarding internal chlorination, especially diffusion of chlorine in metallic alloys. This paper describes results of experiments on Ni-Cr alloys (<10 wt% Cr) exposed in an atmosphere containing radioactive HCl. The diffusion of chlorine in the alloy can be determined by measurement of residual {beta}-activity from the sample surface. Successively thin layers (0.5-10 {mu}m) of the alloy were removed by lapping and the surface activity was measured to obtain a depth profile. Both single and polycrystalline materials were tested. Through this work it should be determined if there is in fact solubility and diffusion of chlorine in Ni-based alloys as some authors have proposed or if the ingress of chlorine is mainly a grain boundary phenomenon. (orig.)

  20. Fe-Ni-bearing serpentines from the saprolite horizon of Caribbean Ni-laterite deposits: new insights from thermodynamic calculations

    Science.gov (United States)

    Villanova-de-Benavent, Cristina; Domènech, Cristina; Tauler, Esperança; Galí, Salvador; Tassara, Santiago; Proenza, Joaquín A.

    2017-10-01

    Fe-Ni-bearing serpentine from the saprolite horizon is the main Ni ores in hydrous silicate-type Ni laterites and formed by chemical weathering of partially serpentinized ultramafic rocks under tropical conditions. During lateritization, Mg, Si, and Ni are leached from the surface and transported downwards. Fe2+ is oxidized to Fe3+ and fixed as insoluble Fe-oxyhydroxides (mostly goethite) that incorporate Ni. This Ni is later leached from goethite and incorporated in secondary serpentine and garnierite. As a result, a serpentine-dominated saprolite horizon forms over the ultramafic protolith, overlapped by a Fe-oxyhydroxide-dominated limonite horizon. The serpentine from the protolith (serpentine I) is of hydrothermal origin and yields similar Ni (0.10-0.62 wt.% NiO) and lower Fe (mostly 1.37-5.81 wt.% FeO) concentrations than the primary olivine. In contrast, Fe-Ni-bearing serpentine from the saprolite (serpentine II) shows significantly higher and variable Fe and Ni contents, typically ranging from 2.23 to 15.59 wt.% Fe2O3 and from 1.30 to 7.67 wt.% NiO, suggesting that serpentine get enriched in Fe and Ni under supergene conditions. This study presents detailed mineralogical, textural, and chemical data on this serpentine II, as well as new insights by thermodynamic calculations assuming ideal solution between Fe-, Ni- and Mg-pure serpentines. The aim is to assess if at atmospheric pressure and temperature Fe-Ni-bearing serpentine can be formed by precipitation. Results indicate that the formation of serpentine II under atmospheric pressure and temperature is thermodynamically supported, and pH, Eh, and the equilibrium constant of the reaction are the parameters that affect the results more significantly.

  1. Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: functional behavior

    Science.gov (United States)

    Oliveira, J. P.; Barbosa, D.; Braz Fernandes, F. M.; Miranda, R. M.

    2016-03-01

    It is often reported that, to successfully join NiTi shape memory alloys, fusion-based processes with reduced thermal affected regions (as in laser welding) are required. This paper describes an experimental study performed on the tungsten inert gas (TIG) welding of 1.5 mm thick plates of Ni-rich NiTi. The functional behavior of the joints was assessed. The superelasticity was analyzed by cycling tests at maximum imposed strains of 4, 8 and 12% and for a total of 600 cycles, without rupture. The superelastic plateau was observed, in the stress-strain curves, 30 MPa below that of the base material. Shape-memory effect was evidenced by bending tests with full recovery of the initial shape of the welded joints. In parallel, uniaxial tensile tests of the joints showed a tensile strength of 700 MPa and an elongation to rupture of 20%. The elongation is the highest reported for fusion-welding of NiTi, including laser welding. These results can be of great interest for the wide-spread inclusion of NiTi in complex shaped components requiring welding, since TIG is not an expensive process and is simple to operate and implement in industrial environments.

  2. Distinct demagnetization dynamics of Ni and Fe magnetic moments in a NiFe alloy

    Energy Technology Data Exchange (ETDEWEB)

    Eschenlohr, Andrea; Stamm, Christian; Pontius, Niko; Kachel, Torsten; Radu, Florin [Helmholtz Zentrum Berlin fuer Materialien und Energie, Elektronenspeicherring BESSY II, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Radu, Ilie [Helmholtz Zentrum Berlin fuer Materialien und Energie, Elektronenspeicherring BESSY II, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Radboud University Nijmegen, Heijendaalseweg 135, 6525 AJ Nijmegen (Netherlands); Rasing, Theo; Kimel, Alexey V. [Radboud University Nijmegen, Heijendaalseweg 135, 6525 AJ Nijmegen (Netherlands)

    2011-07-01

    Ultrafast demagnetization has been approached from a variety of experimental and theoretical angles since the first observation of a sub-picosecond quenching of magnetization in Ni. Time constants of demagnetization have been established for elementary transition metals and rare earths. Their compounds and alloys, which are highly relevant for technological applications and for research into the microscopic origins of ultrafast demagnetization, are increasingly investigated with methods like TR-MOKE. Yet experimental methods which combine femtosecond time resolution with an element-sensitive measurement of the magnetization have so far been sparse. We bridge this gap by probing magnetization dynamics in ferromagnetic NiFe alloys in an element-resolved way with 100 fs x-ray pulses generated by the Femtoslicing facility at BESSY II via XMCD. We find different demagnetization time constants for Ni (80 +/- 30 fs) and Fe (240 +/- 30 fs) in Ni50Fe50, evidence of a decoupling of the Ni and Fe dynamics on ultrafast timescales despite the exchange interaction between the two elements.

  3. Participar como niña o niño en el mundo social

    Directory of Open Access Journals (Sweden)

    Silvia Paulina Díaz

    2010-10-01

    Full Text Available En este artículo presento la participación como resultado de un trabajo investigativo realizado durante el año 2007, con niños y niñas escolarizados habitantes de la ciudad de Medellín, Colombia, cuyo objetivo fue analizar las representaciones sociales que ellos y ellas comparten sobre el ejercicio ciudadano. El análisis de la información tiene como ejes fundamentales, la salud colectiva, la sociología de la infancia y la participación en la niñez, en una aproximación que se realiza desde un enfoque cualitativo y etnográfico. En los hallazgos, sobresale cómo las niñas y niños se muestran preparados para ejercer su derecho a la participación como aspecto de sus vidas que se haría posible dentro del marco normativo existente, pero que aún no es asumido en prácticas sociales que los incluyan.

  4. NiTi superelasticity via atomistic simulations

    Science.gov (United States)

    Chowdhury, Piyas; Ren, Guowu; Sehitoglu, Huseyin

    2015-12-01

    The NiTi shape memory alloys (SMAs) are promising candidates for the next-generation multifunctional materials. These materials are superelastic i.e. they can fully recover their original shape even after fairly large inelastic deformations once the mechanical forces are removed. The superelasticity reportedly stems from atomic scale crystal transformations. However, very few computer simulations have emerged, elucidating the transformation mechanisms at the discrete lattice level, which underlie the extraordinary strain recoverability. Here, we conduct breakthrough molecular dynamics modelling on the superelastic behaviour of the NiTi single crystals, and unravel the atomistic genesis thereof. The deformation recovery is clearly traced to the reversible transformation between austenite and martensite crystals through simulations. We examine the mechanistic origin of the tension-compression asymmetries and the effects of pressure/temperature/strain rate variation isolatedly. Hence, this work essentially brings a new dimension to probing the NiTi performance based on the mesoscale physics under more complicated thermo-mechanical loading scenarios.

  5. Multifunction of Ni/Ag Nanocompound Fluid

    Directory of Open Access Journals (Sweden)

    Mu-Jung Kao

    2013-01-01

    Full Text Available An arc-submerged nanoparticle synthesis system (ASNSS is proposed and developed for fabricating Ni/Ag nanocompound fluid. In the development process, the positive and negative electrodes in the system are Ni and Ag, respectively. Applied electrical energy then produces heating source by generating an adequate arc with a high temperature that can melt and vaporize the two electrodes. The nanocompound fluid that is generated by the synthesis system is analyzed by morphological analysis, Zeta potential analysis, heat conductivity analysis, magnetic characteristic analysis, and UV-Vis absorption spectra analysis. Experimental results show that increasing the concentration of added particles and the higher temperature can be helpful to the enhancement of thermal conductivity. The Ni/Ag nanofluid not only preserves the magnetic character of the nickel and the ability of silver to absorb visible light but also enhances the thermal conductivity. The absorption occurs at 406 nm wavelength (redshift from 396 nm to 406 nm, which means that, under the excitement of visible light range (400~700 nm, it can let more easy electrons jump to the conductivity zone from the valence electron zone.

  6. Combining Ru, Ni and Ni(OH){sub 2} active sites for improving catalytic performance in benzene hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Lihua, E-mail: lihuazhu@stu.xmu.edu.cn [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiang Xi (China); Department of Chemical and Biochemical Engineering, National Engineering Laboratory for Green Productions of Alcohols-Ethers-Esters, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Sun, Hanlei; Zheng, Jinbao [Department of Chemical and Biochemical Engineering, National Engineering Laboratory for Green Productions of Alcohols-Ethers-Esters, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Yu, Changlin, E-mail: yuchanglinjx@163.com [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiang Xi (China); Zhang, Nuowei [Department of Chemical and Biochemical Engineering, National Engineering Laboratory for Green Productions of Alcohols-Ethers-Esters, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Shu, Qing [School of Metallurgy and Chemical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, Jiang Xi (China); Chen, Bing H., E-mail: chenbh@xmu.edu.cn [Department of Chemical and Biochemical Engineering, National Engineering Laboratory for Green Productions of Alcohols-Ethers-Esters, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China)

    2017-05-01

    In this study, the Ru{sub 0.04}Ni{sub 0.96}/C(T) catalysts were successfully prepared by the simple methods of hydrazine-reduction and galvanic replacement, where 0.04/0.96 and T represented the Ru/Ni atomic ratio and reducing temperature of the catalyst in N{sub 2}+10%H{sub 2}, respectively. The nanostructures of the Ru{sub 0.04}Ni{sub 0.96} nanoparticles in the Ru{sub 0.04}Ni{sub 0.96}/C(T) catalysts were controlled by modulating their annealing temperature in N{sub 2}+10%H{sub 2} and characterized by an array of techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy energy dispersive X-ray spectroscopy (STEM-EDS) mapping and high-sensitivity low-energy ion scattering (HS-LEIS). The Ru{sub 0.04}Ni{sub 0.96}/C(30) catalyst, which was composed of Ru clusters or single atoms supported on Ni/Ni(OH){sub 2} nanoparticles, exhibited much better catalytic performance for benzene hydrogenation than the Ru{sub 0.04}Ni{sub 0.96}/C(T) catalysts reduced at above 30 °C, such as Ru{sub 0.04}Ni{sub 0.96}/C(160) with the nanostructure of partial Ru{sub 0.04}Ni{sub 0.9} alloy and Ru{sub 0.04}Ni{sub 0.96}/C(280) with the nanostructure of complete Ru{sub 0.04}Ni{sub 0.9} alloy. The reason was that the synergistic effect of multiple active sites – Ru, Ni and Ni(OH){sub 2} sites was present in the Ru{sub 0.04}Ni{sub 0.96}/C(30) catalyst, where hydrogen was preferentially activated at Ru sites, benzene was probably activated at Ni(OH){sub 2} surface and Ni acted as a “bridge” for transferring activated H{sup ∗} species to activated benzene by hydrogen spillover effect, hydrogenating and forming product – cyclohexane. This study also provided a typical example to illustrate that the synergy effect of multiple active sites can largely improve the catalytic hydrogenation performance. - Highlights: • The Ru

  7. Fabrications of High-Capacity Alpha-Ni(OH2

    Directory of Open Access Journals (Sweden)

    Kwo-Hsiung Young

    2017-03-01

    Full Text Available Three different methods were used to produce α-Ni(OH2 with higher discharge capacities than the conventional β-Ni(OH2, specifically a batch process of co-precipitation, a continuous process of co-precipitation with a phase transformation step (initial cycling, and an overcharge at low temperature. All three methods can produce α-Ni(OH2 or α/β mixed-Ni(OH2 with capacities higher than that of conventional β-Ni(OH2 and a stable cycle performance. The second method produces a special core–shell β-Ni(OH2/α-Ni(OH2 structure with an excellent cycle stability in the flooded half-cell configuration, is innovative and also already mass-production ready. The core–shell structure has been investigated by both scanning and transmission electron microscopies. The shell portion of the particle is composed of α-Ni(OH2 nano-crystals embedded in a β-Ni(OH2 matrix, which helps to reduce the stress originating from the lattice expansion in the β-α transformation. A review on the research regarding α-Ni(OH2 is also included in the paper.

  8. Ferromagnetic (Ni) nanoparticles–CuTl-1223 superconductor composites

    Energy Technology Data Exchange (ETDEWEB)

    Qasim, Irfan; Waqee-ur-Rehman, M. [Materials Research Laboratory, Department of Physics, Faculty of Basic and Applied Sciences (FBAS), International Islamic University (IIU), Islamabad 44000 (Pakistan); Mumtaz, M., E-mail: mmumtaz75@yahoo.com [Materials Research Laboratory, Department of Physics, Faculty of Basic and Applied Sciences (FBAS), International Islamic University (IIU), Islamabad 44000 (Pakistan); Hussain, Ghulam; Nadeem, K. [Materials Research Laboratory, Department of Physics, Faculty of Basic and Applied Sciences (FBAS), International Islamic University (IIU), Islamabad 44000 (Pakistan); Shehzad, Khurram [Department of Information Science and Electronic Engineering, Zhejiang University, Hangzhou 310027 (China)

    2016-04-01

    (Ni){sub x}/CuTl-1223 (x=0, 0.25, 0.75, and 1.0 wt%) nanoparticles–superconductor composites were synthesized by the addition of ferromagnetic nickel (Ni) nanoparticles in appropriate ratio to Cu{sub 0.5}Tl{sub 0.5}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10−δ} (CuTl-1223) superconducting matrix. Structural, morphological, compositional and superconducting transport properties of these composites were studied by different experimental techniques. It was observed that the addition of Ni nanoparticles had not altered the crystal structure of host CuTl-1223 phase, which is somehow an evidence of the occupancy of these nanoparticles at the grain-boundaries. Suppression of superconducting properties was attributed to pair-breaking due to spin scattering across these ferromagnetic Ni nanoparticles. The enhanced magnetization of ferromagnetic Ni nanoparticles at reduced temperatures plays a significant role to reduce the diamagnetism of (Ni){sub x}/CuTl-1223 composites. Fluctuation induced conductivity (FIC) analysis of resistivity versus temperature data has explained very well the effects of Ni nanoparticles on superconductivity of CuTl-1223 phase. - Highlights: • (Ni){sub x}/CuTl-1223 composites were synthesized. • Crystal structure of CuTl-1223 phase was not affected by Ni nanoparticles. • Superconductivity of CuTl-1223 phase was suppressed by Ni nanoparticles addition. • Suppression of superconductivity was explained theoretically.

  9. Morphological instability of lamellar structures in directionally solidified Ni-Ni3Si alloys

    Science.gov (United States)

    Wei, Lufeng; Zhao, Zhilong; Gao, Jianjun; Cui, Kai; Guo, Jingying; Chen, Sen; Liu, Lin

    2018-02-01

    The morphological instability of lamellar structures in Ni-Ni3Si eutectic and hypereutectic alloys directionally solidified at low growth rates was investigated. The first instability in large lamellar structures was zigzag instability, which formed curved lamellae. A zigzag pattern was first displayed in three dimensions. The diffusion-limited growth of the Ni3Si phase decreased phase width and spacing, consequently causing zigzag instability. The reduced spacing was observed at λ/λave = 0.9. After zigzag instability, the microstructure of the eutectic alloy turned into a labyrinth structure and lamellar fragmentation. However, in hypereutectic alloys, shape transition from lamellae to rods occurred, in turn, by the broken lamellae or elongated rods to dumbbell-shaped rods, peanut-shaped rods, and circular rods.

  10. Spray Forming of NiTi and NiTiPd Shape-Memory Alloys

    Science.gov (United States)

    Mabe, James; Ruggeri, Robert; Noebe, Ronald

    2008-01-01

    In the work to be presented, vacuum plasma spray forming has been used as a process to deposit and consolidate prealloyed NiTi and NiTiPd powders into near net shape actuators. Testing showed that excellent shape memory behavior could be developed in the deposited materials and the investigation proved that VPS forming could be a means to directly form a wide range of shape memory alloy components. The results of DSC characterization and actual actuation test results will be presented demonstrating the behavior of a Nitinol 55 alloy and a higher transition temperature NiTiPd alloy in the form of torque tube actuators that could be used in aircraft and aerospace controls.

  11. Catalytic properties of amorphous NiZr alloys. Amorufasu NiZr gokin no shokubai tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Komiyama, H.; Shimogaki, Y.; Egashira, Y.; Sumiya, S. (The Univ. of Tokyo, Tokyo, (Japan). Faculty of Engineering)

    1990-03-01

    This paper investigated the catalytic properties of amorphous NiZr alloys. Amorphous alloys were used as ribbon, powder and ultra-fine powder (a-UFP) prepared by different processes as they are, or after chemically cleaved process. Catalytic reactions were measured by the gas chromatography for gas composition at the reactor outlet. The applied reactions were the hydrogenation of CO, acethylene and butadiene, and the hydrogenolysis of ethane. All amorphous alloys indicated similar reacting characteristics, independent of the preparation methods. It should reflect any common substance that amorphous alloy of nonequilibrium which can be different states by manufacturing process, show similar characteristics like this. The surface of amprphous alloys has strong affinity to Zr and O and Ni, Zr and O is thought to be highly dispersed, presumably at an atomic level, maintaining Ni as the stable oxidized condition. These catalysts are very interesting because such the characteristics cannot be realized in crystaline catalysts. 5 refs., 9 figs., 2 tabs.

  12. Internal reforming of methane at Ni/YSZ and Ni/CGO SOFC cermet anodes

    Energy Technology Data Exchange (ETDEWEB)

    Timmermann, H.; Fouquet, D.; Weber, A.; Ivers-Tiffee, E. [Karlsruhe Univ. (Germany). Inst. fuer Werkstoffe der Elektrotechnik; Hennings, U.; Reimert, R. [Karlsruhe Univ. (Germany). Engler-Bunte-Institut, Bereich Gas, Erdoel und Kohle

    2006-07-15

    The internal reforming of methane on Ni/CGO and Ni/YSZ anodes was investigated with single cells operated at steam to carbon ratios from 0 to 3 and at temperatures of 800 C and 950 C. The incorporation of gas extraction ports allowed the measurement of the local gas composition in the anode gas compartment by gas chromatography. The methane conversion is presented as a function of feed gas composition, temperature, gas flow velocity, and electrical load. The impact of the anode material on the reforming reaction and on cell performance is shown. Methane conversion along the Ni/CGO anode was calculated with a one-dimensional model; the required kinetic parameters were obtained by data fitting. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  13. Measurement of {sup 63}Ni and {sup 59}Ni by accelerator mass spectrometry using characteristic projectile x-rays

    Energy Technology Data Exchange (ETDEWEB)

    McAninch, J.E.; Hainsworth, L.J.; Marchetti, A.A. [and others

    1996-05-01

    The long-lived isotopes of nickel ({sup 59}Ni, {sup 63}Ni) have current and potential use in a number of applications including cosmic radiation studies, biomedical tracing, characterization of low-level radioactive wastes, and neutron dosimetry. Methods are being developed at LLNL for the routine detection of these isotopes by AMS. One intended application is in Hiroshima dosimetry. The reaction {sup 63}Cu(n,p){sup 63}Ni has been identified as one of a small number of reactions which might be used for the direct determination of the fast neutron fluence emitted by the Hiroshima bomb. AMS measurement of {sup 63}Ni(t{sub 1/2} = 100 y) requires the chemical removal of {sup 63}Cu, which is a stable isobar of {sup 63}Ni. Following the electrochemical separation of Ni from gram-sized copper samples, the Cu concentration is further lowered to < 2 x 10{sup -8} (Cu/Ni) using the reaction of Ni with carbon monoxide to form the gas Ni(CO){sub 4}. The Ni(CO){sub 4} is thermally decomposed directly in sample holders for measurement by AMS. After analysis in the AMS spectrometer, the ions are identified using characteristic projectile x-rays, allowing further rejection of remaining {sup 63}Cu. In a demonstration experiment, {sup 63}Ni was measured in Cu wires (2-20 g) which had been exposed to neutrons from a {sup 252}Cf source. We successfully measured {sup 63}Ni at levels necessary for the measurement of Cu samples exposed near the Hiroshima hypocenter. For the demonstration samples, the Cu content was chemically reduced by a factor of 10{sup 12} with quantitative retention of {sup 63}Ni. Detection sensitivity (3{sigma}) was {approximately}20 fg {sup 63}Ni in 1 mg Ni carrier ({sup 63}Ni/Ni {approx} 2 x 10{sup -11}). Significant improvements in sensitivity are expected with planned incremental changes in the methods. Preliminary results indicate that a similar sensitivity is achievable for {sup 59}Ni (t{sub 1/2} = 10{sup 5} y).

  14. Observation of Ni{sup 3+} acceptor in P-type Ni(P):SnO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Po-Ming, E-mail: 101324061@cc.ncu.edu.tw; Wu, Yen-Ju; Hsieh, Chih-Yi; Liao, Ching-Han; Liu, Yen-Shuo; Liu, Cheng-Yi

    2015-05-15

    Highlights: • In this work, Ni and Ni(P) was doped into the SnO{sub 2} oxide to form p-type SnO{sub 2} thin film. • The Ni{sup 3+}-Sn{sup 4+} substitution reaction produces electrical holes overwhelming the free electrons generated by oxygen vacancies. • We report that Ni{sup 3+}-Sn{sup 4+} substitution reaction only occurs, as P is co-doped with Ni in SnO{sub 2} thin film, which converts n-type SnO{sub 2} thin film to p-type conduction. • With the developed p-Ni(P):SnO{sub 2}, transparent p-Ni(P):SnO{sub 2}/i-SnO{sub 2}/n-ITO p-i-n structure was fabricated and characterized: low leakage-current (8.41 × 10{sup −5} A at −5 V), turn-on voltage (4.68 eV), good transmittance (85%), and small ideality-factor (1.73). - Abstract: Ni dopants typically exist as Ni{sup 2+} oxidation state in metal oxides. We report that as Ni is co-doped with P in Ni(P):SnO{sub 2}, P promotes Ni{sup 2+} into Ni{sup 3+}, which acts as acceptor and coverts n-type SnO{sub 2} to p-type conduction. Significant hole concentration (4.5 × 10{sup 18} cm{sup −3}) of p-type Ni(P):SnO{sub 2} can be obtained. The chemical state of Ni{sup 3+} in Ni(P):SnO{sub 2} is verified by ultra-violet and x-ray photoelectron spectroscopy. With the developed p-Ni(P):SnO{sub 2}, transparent p-Ni(P):SnO{sub 2}/i-SnO{sub 2}/n-ITO p-i-n structure was fabricated and characterized: low leakage-current (8.41 × 10{sup −5} A at −5 V), turn-on voltage (4.68 eV), good transmittance (85%), and small ideality-factor (1.73)

  15. NiO-Microflower Formed by Nanowire-weaving Nanosheets with Interconnected Ni-network Decoration as Supercapacitor Electrode

    Science.gov (United States)

    Ci, Suqing; Wen, Zhenhai; Qian, Yuanyuan; Mao, Shun; Cui, Shumao; Chen, Junhong

    2015-01-01

    We propose a ‘weaving’ evolution mechanism, by systematically investigating the products obtained in controlled experiments, to demonstrate the formation of Ni-based ‘microflowers’ which consists of multiple characteristic dimensions, in which the three dimensional (3D) NiO ‘microflower’ is constructed by a two-dimensional (2D) nanosheet framework that is derived from weaving one-dimensional (1D) nanowires. We found such unique nanostructures are conducive for the generation of an electrically conductive Ni-network on the nanosheet surface after being exposed to a reducing atmosphere. Our study offers a promising strategy to address the intrinsic issue of poor electrical conductivity for NiO-based materials with significant enhancement of utilization of NiO active materials, leading to a remarkable improvement in the performance of the Ni-NiO microflower based supercapacitor. The optimized Ni-NiO microflower material showed a mass specific capacitance of 1,828 F g−1, and an energy density of 15.9 Wh kg−1 at a current density of 0.5 A g−1. This research not only contributes to understanding the formation mechanism of such ‘microflower’ structures but also offers a promising route to advance NiO based supercapacitor given their ease of synthesis, low cost, and long-term stability. PMID:26165386

  16. High Density Arrayed Ni/NiO Core-shell Nanospheres Evenly Distributed on Graphene for Ultrahigh Performance Supercapacitor.

    Science.gov (United States)

    Liu, Fanggang; Wang, Xiaobing; Hao, Jin; Han, Shuang; Lian, Jianshe; Jiang, Qing

    2017-12-18

    A novel NiO/Ni/RGO three-dimensional core-shell architecture consisting of Ni nanoparticles as core, NiO as shell and reduced graphene oxide (RGO) as conductivity layer, has been constructed by redox reactions with hydrothermal method and heat treatment. High density arrayed nickel nanoparticles (20 nm diameter) semi-coated by a 3 nm thick layer of NiO are evenly distributed on the surface of graphene. This elaborate design not only uses abundant NiO surfaces to provide a wealth of active sites, but also bridges electrochemical active NiO shell and graphene by Ni core to construct an interconnected 3D conductive network. Since both electrochemical activity and excellent conductivity are reserved in this Ni/NiO core-shell/graphene layer 3D structure, the as-prepared electrode material exhibits an extremely high specific capacitance (2048.3 F g-1 at current density of 1 A g-1) and excellent cycle stability (77.8% capacitance retention after 10000 cycles at current density of 50 A g-1). The novel method presented here is easy and effective and would provide reference for the preparation of other high performance supercapacitor electrodes.

  17. On the Ni-Ion release rate from surfaces of binary NiTi shape memory alloys

    Science.gov (United States)

    Ševčíková, Jana; Bártková, Denisa; Goldbergová, Monika; Kuběnová, Monika; Čermák, Jiří; Frenzel, Jan; Weiser, Adam; Dlouhý, Antonín

    2018-01-01

    The study is focused on Ni-ion release rates from NiTi surfaces exposed in the cell culture media and human vascular endothelial cell (HUVEC) culture environments. The NiTi surface layers situated in the depth of 70 μm below a NiTi oxide scale are affected by interactions between the NiTi alloys and the bio-environments. The finding was proved with use of inductively coupled plasma mass spectrometry and electron microscopy experiments. As the exclusive factor controlling the Ni-ion release rates was not only thicknesses of the oxide scale, but also the passivation depth, which was two-fold larger. Our experimental data strongly suggested that some other factors, in addition to the Ni concentration in the oxide scale, admittedly hydrogen soaking deep below the oxide scale, must be taken into account in order to rationalize the concentrations of Ni-ions released into the bio-environments. The suggested role of hydrogen as the surface passivation agent is also in line with the fact that the Ni-ion release rates considerably decrease in NiTi samples that were annealed in controlled hydrogen atmospheres prior to bio-environmental exposures.

  18. Magnetic Excitations in the Stacked Quantum Magnets NaNiO2 and LiNiO2

    Science.gov (United States)

    Clancy, J. P.; Gaulin, B. D.; Ruff, J. P. C.; Ross, K. A.; van Gastel, G. J.; Abernathy, D. L.; Stone, M. B.

    2009-03-01

    NaNiO2 and LiNiO2 are isostructural stacked triangular lattice quantum magnets, in which magnetism is conventionally thought to arise due to spin 1/2 moments carried by Ni^3+ ions. Surprisingly, while NaNiO2 undergoes a cooperative Jahn-Teller transition at 480K and magnetically orders below TN ˜ 23K, LiNiO2 undergoes a glass transition at Tg ˜ 9K and remains disordered down to the lowest measured temperatures. The absence of long-range magnetic order in LiNiO2 has been attributed to either geometric frustration caused by mixing of the Li and Ni sublattices, or orbital degeneracy due to the absence of a coherent Jahn-Teller distortion. We have performed time of flight neutron scattering measurements on polycrystalline samples of NaNiO2 and LiNiO2 using the wide Angular-Range Chopper Spectrometer (ARCS) at the SNS. Our measurements reveal previously unobserved magnetic excitations at relatively high energy transfers, which we associate with ferromagnetic spin waves mediated by in-plane interactions. We also find evidence of critical scattering in NaNiO2 near the magnetic phase transition at TN. These results will be compared with previous measurements collected using the DCS at NIST.

  19. NiO-Microflower Formed by Nanowire-weaving Nanosheets with Interconnected Ni-network Decoration as Supercapacitor Electrode

    Science.gov (United States)

    Ci, Suqing; Wen, Zhenhai; Qian, Yuanyuan; Mao, Shun; Cui, Shumao; Chen, Junhong

    2015-07-01

    We propose a ‘weaving’ evolution mechanism, by systematically investigating the products obtained in controlled experiments, to demonstrate the formation of Ni-based ‘microflowers’ which consists of multiple characteristic dimensions, in which the three dimensional (3D) NiO ‘microflower’ is constructed by a two-dimensional (2D) nanosheet framework that is derived from weaving one-dimensional (1D) nanowires. We found such unique nanostructures are conducive for the generation of an electrically conductive Ni-network on the nanosheet surface after being exposed to a reducing atmosphere. Our study offers a promising strategy to address the intrinsic issue of poor electrical conductivity for NiO-based materials with significant enhancement of utilization of NiO active materials, leading to a remarkable improvement in the performance of the Ni-NiO microflower based supercapacitor. The optimized Ni-NiO microflower material showed a mass specific capacitance of 1,828 F g-1, and an energy density of 15.9 Wh kg-1 at a current density of 0.5 A g-1. This research not only contributes to understanding the formation mechanism of such ‘microflower’ structures but also offers a promising route to advance NiO based supercapacitor given their ease of synthesis, low cost, and long-term stability.

  20. Ni-based composite microstructures fabricated by femtosecond laser reductive sintering of NiO/Cr mixed nanoparticles

    Science.gov (United States)

    Tamura, Kenki; Mizoshiri, Mizue; Sakurai, Junpei; Hata, Seiichi

    2017-06-01

    Ni-based composite micropatterns were fabricated by the femtosecond laser reductive sintering of NiO/Cr mixed nanoparticles. A NiO/Cr mixed nanoparticle solution including ethylene glycol and polyvinylpyrrolidone was irradiated with focused femtosecond laser pulses. The X-ray diffraction spectra of the fabricated micropatterns indicated that NiO nanoparticles were well reduced under atmospheric conditions in the laser scanning speed range of 5-15 mm/s. In contrast, micropatterns including NiO were formed at a laser scanning speed of 1 mm/s, indicating that the reduced Ni was reoxidized by overheating. These results were supported by those of energy-dispersive X-ray spectrometry analysis and the electrical resistivity of the micropatterns. The compositions such as Ni, NiO, Cr2O3, and Ni-Cr in the fabricated micropatterns depended on laser scanning speed. The selective fabrication of a ferromagnetic free microgear from the substrate and an axis fixed on the substrate was demonstrated by controlling the laser scanning speed. The fabrication process for Ni-based composite microstructures is useful for the fabrication of ferromagnetic microdevices.

  1. Influence of Ni doping on PtNi nanoparticles: Synthesis, electronic/atomic structure and photocatalyst investigations

    Science.gov (United States)

    Varshney, Mayora; Sharma, Aditya; Shin, Hyun-Joon; Lee, Hyun Hwi; Jeon, Tae-Yeol; Lee, Byeong-Hyeon; Chae, Keun-Hwa; Won, Sung Ok

    2017-11-01

    Carbon-supported Pt and PtNi nanoparticles (NPs) were synthesized using a borohydride reduction method. Structural properties were studied by synchrotron X-ray diffraction (XRD) and the size/shape of the NPs was determined by transmission electron microscope (TEM). X-ray absorption spectroscopy with its two amendments; X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), has been employed to investigate the local electronic/atomic structure surrounding the Pt and Ni atoms. XANES results, at Pt L3-edge and Ni K-edge, have shown fractional oxidation of Pt and Ni atoms. The Pt3Ni1NPs have exhibited a lower bond distance of Pt-Ni shell and higher coordination number of Pt-Ni shells, indicating the alloy formation between Pt and Ni. We further have demonstrated that the Pt and PtNi NPs can serve as effective photocatalysts towards the degradation of water pollutant dye (methyl orange (MO)). By considering the interband charge-transfer of Pt (5d →6sp), a tentative mechanism is proposed to understand the photocatalytic degradation of MO dye molecules by Pt/PtNi NPs under the light irradiation.

  2. Validez judicial del testimonio del niño, niña o adolescente

    OpenAIRE

    Quiñónez Franky, Franciny Orlando; Cuellar Pineda, Mónica Alexandra; López Andrade, Sandra Eugenia

    2015-01-01

    Este trabajo está encaminado a realizar un aporte a la investigación de delitos sexuales en los cuales resultan víctimas los niños, niñas y adolescentes - NNA, en orden a que el enjuiciamiento de estos casos responda a parámetros y a bases que metodológica y epistemológicamente conduzcan a conclusiones científicamente procuradas. Es evidente que la validez del testimonio proveniente de sujetos calificados como los menores de edad, sobre quienes recaen los poderosos efectos del int...

  3. Transmutation-induced embrittlement of V-Ti-Ni and V-Ni alloys in HFIR

    Energy Technology Data Exchange (ETDEWEB)

    Ohnuki, S.; Takahashi, H. [Hokkaido Univ., Sapparo (Japan); Garner, F.A. [Pacific Northwest National Laboratory, Richland, WA (United States); Pawel, J.E. [Oak Ridge National Laboratory, TN (United States)] [and others

    1996-04-01

    Vanadium, V-1Ni, V-10Ti and V-10Ti-1Ni (at %) were irradiated in HFIR to doses ranging from 18 to 30 dpa and temperatures between 300 and 600C. Since the irradiation was conducted in a highly thermalized neutron spectrum without shielding against thermal neutrons, significant levels of chromium (15-22%) were formed by transmutation. The addition of such large chromium levels strongly elevated the ductile to brittle transition temperature. At higher irradiation temperatures radiation-induced segregation of transmutant Cr and solute Ti at specimen surfaces leads to strong increases in the density of the alloy.

  4. Raman active modes of NiSi crystal

    Energy Technology Data Exchange (ETDEWEB)

    Wan Li, E-mail: liwan_china@yahoo.com.c [Department of Physics, Wenzhou University (China); Tang Bo; Cheng Xinhong; Ren Yiming; Zhang Xuefei; Xu Dapeng; Luo Haijun; Huang Yunmi [Department of Physics, Wenzhou University (China)

    2009-08-01

    Raman scattering intensities of the NiSi Raman-active modes have been calculated with three Raman measurement configurations, which can be used for the symmetry assignment of the NiSi Raman peaks. Raman-active vibrations of the NiSi crystal have also been theoretically studied. Results show that the lattices with A{sub g} and B{sub 2g} modes vibrate only in the plane normal to the NiSi[0 1 0] direction while the lattices with B{sub 1g} and B{sub 3g} modes vibrate only along the NiSi[0 1 0] axis. Based on such study, the relationship between the anisotropic strain distribution in the NiSi thin film and the Raman peak shifts has been briefly discussed.

  5. Microstructure and martensitic transformation of Ni-Ti-Pr alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Chunwang [Inner Mongolia University of Technology, College of Science, Hohhot (China); Shanghai Maritime University, College of Arts and Sciences, Shanghai (China); Zhao, Shilei; Jin, Yongjun; Hou, Qingyu [Inner Mongolia University of Technology, College of Science, Hohhot (China); Guo, Shaoqiang [Beihang University, Key Laboratory of Micro-nano Measurement, Manipulation and Physics (Ministry of Education), Department of Physics, Beijing (China)

    2017-09-15

    The effect of Pr addition on the microstructure and martensitic transformation behavior of Ni{sub 50}Ti{sub 50-x}Pr{sub x} (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9) alloys were investigated experimentally. Results show that the microstructures of Ni-Ti-Pr alloys consist of the NiTi matrix and the NiPr precipitate with the Ti solute. The martensitic transformation start temperature decreases gradually with the increase in Pr fraction. The stress around NiPr precipitates is responsible for the decrease in martensitic transformation temperature with the increase in Pr fraction in Ni-Ti-Pr alloys. (orig.)

  6. Effect of Polyethylene Glycol on the NiO Photocathode.

    Science.gov (United States)

    Li, Shengjun; Chen, Zeng; Kong, Wenping; Jia, Xiyang; Cai, Junhao; Dong, Shaokang

    2017-08-17

    In this study, a uniform nanoporous NiO film, with a thickness of up to 2.6 μm, was prepared using polyethylene glycol (PEG). The addition of PEG significantly decreased the cracks in the NiO film and prevented the peeling of the NiO film from a fluorine-doped tin oxide substrate. The NiO cathode was prepared using CdSeS quantum dots (QDs) as the sensitizer, with an optimized photoelectric conversion of 0.80%. The optimized QD-sensitized NiO films were first assembled with the TiO2 anode to prepared QD-sensitized p-n-type tandem solar cells. The open circuit voltage was greater than that obtained using the separated NiO cathode or TiO2 anode.

  7. Effect of Polyethylene Glycol on the NiO Photocathode

    Science.gov (United States)

    Li, Shengjun; Chen, Zeng; Kong, Wenping; Jia, Xiyang; Cai, Junhao; Dong, Shaokang

    2017-08-01

    In this study, a uniform nanoporous NiO film, with a thickness of up to 2.6 μm, was prepared using polyethylene glycol (PEG). The addition of PEG significantly decreased the cracks in the NiO film and prevented the peeling of the NiO film from a fluorine-doped tin oxide substrate. The NiO cathode was prepared using CdSeS quantum dots (QDs) as the sensitizer, with an optimized photoelectric conversion of 0.80%. The optimized QD-sensitized NiO films were first assembled with the TiO2 anode to prepared QD-sensitized p-n-type tandem solar cells. The open circuit voltage was greater than that obtained using the separated NiO cathode or TiO2 anode.

  8. Euhedral metallic-Fe-Ni grains in extraterrestrial samples

    Science.gov (United States)

    Rubin, Alan E.

    1993-01-01

    Metallic Fe-Ni is rare in terrestrial rocks, being largely restricted to serpentinized peridotites and volcanic rocks that assimilated carbonaceous material. In contrast, metallic Fe-Ni is nearly ubiquitous among extraterrestrial samples (i.e., meteorites, lunar rocks, and interplanetary dust particles). Anhedral grains are common. For example, in eucrites and lunar basalts, most of the metallic Fe-Ni occurs interstitially between silicate grains and thus tends to have irregular morphologies. In many porphyritic chondrules, metallic Fe-Ni and troilite form rounded blebs in the mesostasis because their precursors were immiscible droplets. In metamorphosed ordinary chondrites, metallic Fe-Ni and troilite form coarse anhedral grains. Some of the metallic Fe-Ni and troilite grains has also been mobilized and injected into fractures in adjacent silicate grains where local shock-reheating temperatures reached the Fe-FeS eutectic (988 C). In interplanetary dust particles metallic Fe-Ni most commonly occurs along with sulfide as spheroids and fragments. Euhedral metallic Fe-Ni grains are extremely rare. Several conditions must be met before such grains can form: (1) grain growth must occur at free surfaces, restricting euhedral metallic Fe-Ni grains to systems that are igneous or undergoing vapor-deposition; (2) the metal (+/-) sulfide assemblage must have an appropriate bulk composition so that taenite is the liquidus phase in igneous systems or the stable condensate phase in vapor-deposition systems; and (3) metallic Fe-Ni grains must remain underformed during subsequent compaction, thermal metamorphism, and shock. Because of these restrictions, the occurrence of euhedral metallic Fe-Ni grains in an object can potentially provide important petrogenetic information. Despite its rarity, euhedral metallic Fe-Ni occurs in a wide variety of extraterrestrial materials. Some of these materials formed in the solar nebula; others formed on parent body surfaces by meteoroid

  9. Los niños y los videojuegos

    OpenAIRE

    Orrego Gaviria, Jaime; Fundación Valle de Lili

    2007-01-01

    Los niños y los videojuegos / Efectos perjudiciales de la utilización de los videojuegos por los niños y adolescentes/ Efectos benéficos de la de la utilización de los videojuegos por los niños y adolescentes/ Recomendaciones para favorecer el uso adecuado/ Sistema de clasificación de los videojuegos

  10. Microstructures in rapidly solidified Ni-Mo alloys

    Science.gov (United States)

    Jayaraman, N.; Tewari, S. N.; Hemker, K. J.; Glasgow, T. K.

    1986-01-01

    Ni-Mo alloys of compositions ranging from pure Ni to Ni-40 at. percent Mo were rapidly solidified by Chill Block Melt Spinning in vacuum and were examined by optical metallography, X-ray diffraction and transmission electron microscopy. Rapid solidification resulted in an extension of molybdenum solubility in nickel from 28 to 37.5 at. percent. A number of different phases and microstructures were seen at different depths (solidification conditions) from the quenched surface of the melt spun ribbons.

  11. Multicoloured electrochromic thin films of NiO/PANI

    Energy Technology Data Exchange (ETDEWEB)

    Sonavane, A C; Patil, P S [Thin Film Materials Laboratory, Department of Physics, Shivaji University, Kolhapur-416 004 (India); Inamdar, A I [Department of Semiconductor Science, Dongguk University, Seoul 100-715 (Korea, Republic of); Deshmukh, H P, E-mail: patilps_2000@yahoo.co [Department of Physics, Y. M. College, Bharati Vidyapeeth, Erandwane, Pune (India)

    2010-08-11

    NiO/polyaniline (PANI) thin films have been prepared by a two-step process. NiO thin films were electrodeposited from an aqueous solution of NiCl{sub 2} {center_dot} 6H{sub 2}O at pH 7.5 on fluorine-doped tin oxide coated glass substrates and a layer of PANI was formed on NiO thin films by chemical bath deposition. The films were characterized for their structural, optical, morphological and electrochromic properties. X-ray diffraction and Fourier-transform infrared spectroscopy indicated the formation of NiO and PANI, in which NiO is of cubic structure. Scanning electron micrographs represent porous granular NiO, which get uniformly carpeted with PANI, leading to a matty morphology of NiO/PANI samples. The electrochromic performance of NiO/PANI films has been studied using cyclic voltammetry and chronoamperometry over the -1.2 to +2.2 V (versus saturated calomel electrode (SCE)) potential window in 1M LiClO{sub 4} + propylene carbonate. The NiO/PANI films exhibit electrochromism with colour that changes from pale yellow (leucoemeraldine base at -0.7 V versus SCE) to dark green (emeraldine salt at 0.4 V versus SCE) to purple (pernigraniline at 0.8 V versus SCE) in the reduced states and dark blue (nigraniline at 0.5 V versus SCE) to dark green (emeraldine salt at 0.1 V versus SCE) to light green (photoemeraldine at -0.3 V versus SCE) in its oxidized states. These colours, though akin to pure PANI, have higher contrast, high speed of operation and high stability, owing to the properties of NiO. The colouration efficiency of the NiO/PANI film was estimated to be 85 cm{sup 2} C{sup -1}.

  12. NiAl-based Polyphase in situ Composites in the NiAl-Ta-X (X = Cr, Mo, or V) Systems

    Science.gov (United States)

    Johnson, D. R.; Oliver, B. F.; Noebe, R. D.; Whittenberger, J. D.

    1995-01-01

    Polyphase in situ composites were generated by directional solidification of ternary eutectics. This work was performed to discover if a balance of properties could be produced by combining the NiAl-Laves phase and the NiAl-refractory metal phase eutectics. The systems investigated were the Ni-Al-Ta-X (X = Cr, Mo, or V) alloys. Ternary eutectics were found in each of these systems and the eutectic composition, temperature, and morphology were determined. The ternary eutectic systems examined were the NiAl-NiAlTa-(Mo, Ta), NiAl-(Cr, Al) NiTa-Cr, and the NiAl-NiAlTa-V systems. Each eutectic consists of NiAl, a C14 Laves phase, and a refractory metal phase. Directional solidification was performed by containerless processing techniques in a levitation zone refiner to minimize alloy contamination. Room temperature fracture toughness of these materials was determined by a four-point bend test. Preliminary creep behavior was determined by compression tests at elevated temperatures, 1100-l400 K. Of the ternary eutectics, the one in the NiAl-Ta-Cr system was found to be the most promising. The fracture toughness of the NiAl-(Cr, Al)NiTa-Cr eutectic was intermediate between the values of the NiAl-NiAlTa eutectic and the NiAl-Cr eutectic. The creep strength of this ternary eutectic was similar to or greater than that of the NiAl-Cr eutectic.

  13. Stress corrosion cracking of NiTi in artificial saliva.

    Science.gov (United States)

    Wang, Jianqiu; Li, Nianxing; Rao, Guangbin; Han, En-Hou; Ke, Wei

    2007-02-01

    This paper aimed to study the mechanism of the cracking of orthodontic NiTi wire. Two orthodontic NiTi wires were subjected: (1) optical and scanning electron microscopy (SEM) to observe the fracture surface; (2) energy dispersive X-ray spectroscopy to determine the composition of the surface product; (3) anodic polarization to remove the surface product. Samples of NiTi alloy were subjected to the constant loading test to study the stress corrosion cracking (SCC) behavior of NiTi shape memory alloy in artificial saliva. The results showed that there were three typical areas at the fracture surface of NiTi orthodontic wire. Area '1' was a tool-made notch. Crack initiated from the root of this notch and propagated to form Area '2', which was perpendicular to the wire axis and covered by surface film. This film consisted of Na, K, Cl, P, S and O except Ni and Ti. The cracking process of NiTi alloy under the constant loading test depended on the pH of saliva and applied stress. The crack length was about 262microm, the longest at 300MPa and pH 3.0. A tool-made notch in orthodontic NiTi wires can cause SCC. At high stress and low pH, this NiTi alloy was most sensitive to cracking.

  14. Structural and magnetic studies in Ni/Ti multilayers

    Science.gov (United States)

    Porte, M.; Lassri, H.; Krishnan, R.; Kâabouchi, M.; Mâaza, M.; Sella, C.

    1993-03-01

    Structural and magnetic studies have been carried out on Ni/Ti multilayers prepared by DC triode sputtering. Both metal layers are crystalline with a (111) fibre structure when they are thicker than 20 Å. But for thinner layers one observes a solid solution with an amorphous-like structure. The magnetization decreases with t(Ni) and the analysis of the results at 5 K indicates the presence of a dead Ni layer about 12 Å thick. The t(Ni) dependence of the effective anisotropy shows the absence of surface anisotropy contribution.

  15. Design and fabrication of Ni nanowires having periodically hollow nanostructures

    Science.gov (United States)

    Sada, Takao; Fujigaya, Tsuyohiko; Nakashima, Naotoshi

    2014-09-01

    We propose a concept for the design and fabrication of metal nanowires having periodically hollow nanostructures inside the pores of an anodic aluminum oxide (AAO) membrane using a sacrificial metal. In this study, nickel (Ni) and silver (Ag) were used as the base metal and the sacrificial metal, respectively. Alternating an applied potential between -0.4 and -1.0 V provided alternatively deposited Ni and Ag segments in a Ni-Ag `barcode' nanowire with a diameter of 18 or 35 nm. After etching away the Ag segments, we fabricated Ni nanowires with nanopores of 12 +/- 5.3 nm. Such nanostructure formation is explained by the formation of a Ni shell layer over the surface of the Ag segments due to the strong affinity of Ni2+ for the interior surfaces of AAO. The Ni shell layer allows the Ni segments to remain even after dissolution of the Ag segments. Because the electroplating conditions can be easily controlled, we could carefully adjust the size and pitch of the periodically hollow nanospaces. We also describe a method for the fabrication of Ni nanorods by forming an Ag shell instead of a Ni shell on the Ni-Ag barcode nanowire, in which the interior of the AAO surfaces was modified with a compound bearing a thiol group prior to electroplating.We propose a concept for the design and fabrication of metal nanowires having periodically hollow nanostructures inside the pores of an anodic aluminum oxide (AAO) membrane using a sacrificial metal. In this study, nickel (Ni) and silver (Ag) were used as the base metal and the sacrificial metal, respectively. Alternating an applied potential between -0.4 and -1.0 V provided alternatively deposited Ni and Ag segments in a Ni-Ag `barcode' nanowire with a diameter of 18 or 35 nm. After etching away the Ag segments, we fabricated Ni nanowires with nanopores of 12 +/- 5.3 nm. Such nanostructure formation is explained by the formation of a Ni shell layer over the surface of the Ag segments due to the strong affinity of Ni2+ for the

  16. Hydride Reactivity of Ni-II-X-Ni-II Entities : Mixed-Valent Hydrido Complexes and Reversible Metal Reduction

    NARCIS (Netherlands)

    Gehring, Henrike; Metzinger, Ramona; Herwig, Christian; Intemann, Julia; Harder, Sjoerd; Limberg, Christian

    After the lithiation of PYR-H2 (PYR2-=[{NC(Me)C(H)C(Me)NC6H3(iPr)2}2(C5H3N)]2-), which is the precursor of an expanded beta-diketiminato ligand system with two binding pockets, its reaction with [NiBr2(dme)] led to a dinuclear nickel(II)bromide complex, [(PYR)Ni(mu-Br)NiBr] (1). The bridging bromide

  17. Viviendo con VIH/SIDA: Las voces ocultas de los niños y niñas afectados

    Directory of Open Access Journals (Sweden)

    Luz Adriana Aristizábal Becerra

    2012-01-01

    Full Text Available El VIH/SIDA no es solamente un problema de salud, sino también un problema social. Los primeros casos de VIH/SIDA en niños se describen en 1982 en Estados Unidos, y desde entonces el número de niños infectados y afectados continúa incrementándose, hasta convertirse en lo que en la actualidad se denota como una pandemia. Objetivo. Posibilitar un espacio para que los niños y niñas afectados por el VIH/SIDA, puedan expresar sus vivencias en torno al padecimiento propio y/o de sus padres. Metodología. Estudio de enfoque cualitativo con una orientación fenomenológica. Participaron 29 niños (68 % y 13 niñas (32 % de 4 a 17 años, quienes fueron visitados en sus entornos hogareños. Para evitar la revictimización se utilizaron estrategias lúdicas y juegos para conocer las voces ocultas de estos infantes. Resultados: los hallazgos se agruparon en tres categorías: 1. La orfandad, 2. Rechazo social, estigma y discriminación y 3. Servicios de Salud, donde en cada una se percibe la vivencia subjetiva de cada niño y niña entrevistado(a. Conclusiones: el estigma que ha revestido al VIH/SIDA dificulta considerablemente el desarrollo pleno de los niños y niñas, obstaculizando su libre expresión y crecimiento. Sus voces siguen estando ausentes en las políticas públicas, es por ello que este estudio resaltó las vivencias de los niños y niñas expresadas desde sus propias voces.

  18. Experimental study of the $^{66}$Ni$(d,p)^{67}$Ni one-neutron transfer reaction

    CERN Document Server

    Diriken, J.; Andreyev, A.N.; Antalic, S.; Bildstein, V.; Blazhev, A.; Darby, I.G.; De Witte, H.; Eberth, J.; Elseviers, J.; Fedosseev, V.N.; Flavigny, F.; Fransen, Ch.; Georgiev, G.; Gernhauser, R.; Hess, H.; Huyse, M.; Jolie, J.; Kröll, Th.; Krücken, R.; Lutter, R.; Marsh, B.A.; Mertzimekis, T.; Muecher, D.; Orlandi, R.; Pakou, A.; Raabe, R.; Randisi, G.; Reiter, P.; Roger, T.; Seidlitz, M.; Seliverstov, M.; Sotty, C.; Tornqvist, H.; Van De Walle, J.; Van Duppen, P.; Voulot, D.; Warr, N.; Wenander, F.; Wimmer, K.

    2015-01-01

    The quasi-SU(3) sequence of the positive parity $νg_{9/2}, d_{5/2}, s_{1/2}$ orbitals above the N=40 shell gap are assumed to induce strong quadrupole collectivity in the neutron-rich Fe (Z=26) and Cr (Z=24) isotopes below the nickel region. In this paper the position and strength of these single-particle orbitals are characterized in the neighborhood of $^{68}$Ni (Z=28,N=40) through the $^{66}$Ni($d,p$)$^{67}$Ni one-neutron transfer reaction at 2.95 MeV/nucleon in inverse kinematics, performed at the REX-ISOLDE facility in CERN. A combination of the Miniball $\\gamma$-array and T-REX particle-detection setup was used and a delayed coincidence technique was employed to investigate the 13.3-$\\mu$s isomer at 1007 keV in $^{67}$Ni. Excited states up to an excitation energy of 5.8 MeV have been populated. Feeding of the $νg_{9/2}$ (1007 keV) and $νd_{5/2}$ (2207 keV and 3277 keV) positive-parity neutron states and negative parity ($νpf$) states have been observed at low excitation energy. The extracted relativ...

  19. Transformation dynamics of Ni clusters into NiO rings under electron beam irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Knez, Daniel, E-mail: daniel.knez@felmi-zfe.at [Institute of Electron Microscopy and Nanoanalysis, Graz University of Technology, Steyrergasse 17, 8010 Graz (Austria); Graz Centre for Electron Microscopy, Steyrergasse 17, 8010 Graz (Austria); Thaler, Philipp; Volk, Alexander [Institute of Experimental Physics, Graz University of Technology, Petersgasse 16, 8010 Graz (Austria); Kothleitner, Gerald [Institute of Electron Microscopy and Nanoanalysis, Graz University of Technology, Steyrergasse 17, 8010 Graz (Austria); Graz Centre for Electron Microscopy, Steyrergasse 17, 8010 Graz (Austria); Ernst, Wolfgang E. [Institute of Experimental Physics, Graz University of Technology, Petersgasse 16, 8010 Graz (Austria); Hofer, Ferdinand [Institute of Electron Microscopy and Nanoanalysis, Graz University of Technology, Steyrergasse 17, 8010 Graz (Austria); Graz Centre for Electron Microscopy, Steyrergasse 17, 8010 Graz (Austria)

    2017-05-15

    We report the transformation of nickel clusters into NiO rings by an electron beam induced nanoscale Kirkendall effect. High-purity nickel clusters consisting of a few thousand atoms have been used as precursors and were synthesized with the superfluid helium droplet technique. Aberration-corrected, analytical scanning transmission electron microscopy was applied to oxidise and simultaneously analyse the nanostructures. The transient dynamics of the oxidation could be documented by time lapse series using high-angle annular dark-field imaging and electron energy-loss spectroscopy. A two-step Cabrera-Mott oxidation mechanism was identified. It was found that water adsorbed adjacent to the clusters acts as oxygen source for the electron beam induced oxidation. The size-dependent oxidation rate was estimated by quantitative EELS measurements combined with molecular dynamics simulations. Our findings could serve to better control sample changes during examination in an electron microscope, and might provide a methodology to generate other metal oxide nanostructures. - Highlights: • Beam induced conversion of Ni clusters into crystalline NiO rings has been observed. • Ni clusters were grown with the superfluid He-droplet technique. • oxidizeSTEM was utilized to investigate and simultaneously oxidize these clusters. • Oxidation dynamics was captured in real-time. • Cluster sizes and the oxidation rate were estimated via EELS and molecular dynamics.

  20. Manejo del Niño Quemado

    OpenAIRE

    José Edmundo Sánchez-López

    2011-01-01

    Las quemaduras en la población infantil constituyen un serio problema debido al alto riesgo de mortalidad, presencia delesiones invalidantes, funcionales y estéticas; siendo una causa importante de muerte accidental en los niños. Los pediatrasdesempeñan un papel importante, instruyendo a los padres para la prevención de las quemaduras más comunes en losniños.Las quemaduras pueden producirse por agentes químicos, biológicos y físicos; los últimos constituyen la causa más frecuentede quemaduras...