WorldWideScience

Sample records for safety

  1. SAFETY

    CERN Multimedia

    Niels Dupont

    2013-01-01

    CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

  2. SAFETY

    CERN Multimedia

    C. Schaefer and N. Dupont

    2013-01-01

      “Safety is the highest priority”: this statement from CERN is endorsed by the CMS management. An interpretation of this statement may bring you to the conclusion that you should stop working in order to avoid risks. If the safety is the priority, work is not! This would be a misunderstanding and misinterpretation. One should understand that “working safely” or “operating safely” is the priority at CERN. CERN personnel are exposed to different hazards on many levels on a daily basis. However, risk analyses and assessments are done in order to limit the number and the gravity of accidents. For example, this process takes place each time you cross the road. The hazard is the moving vehicle, the stake is you and the risk might be the risk of collision between both. The same principle has to be applied during our daily work. In particular, keeping in mind the general principles of prevention defined in the late 1980s. These principles wer...

  3. SAFETY

    CERN Document Server

    M. Plagge, C. Schaefer and N. Dupont

    2013-01-01

    Fire Safety – Essential for a particle detector The CMS detector is a marvel of high technology, one of the most precise particle measurement devices we have built until now. Of course it has to be protected from external and internal incidents like the ones that can occur from fires. Due to the fire load, the permanent availability of oxygen and the presence of various ignition sources mostly based on electricity this has to be addressed. Starting from the beam pipe towards the magnet coil, the detector is protected by flooding it with pure gaseous nitrogen during operation. The outer shell of CMS, namely the yoke and the muon chambers are then covered by an emergency inertion system also based on nitrogen. To ensure maximum fire safety, all materials used comply with the CERN regulations IS 23 and IS 41 with only a few exceptions. Every piece of the 30-tonne polyethylene shielding is high-density material, borated, boxed within steel and coated with intumescent (a paint that creates a thick co...

  4. Oxygen safety

    Science.gov (United States)

    COPD - oxygen safety; Chronic obstructive pulmonary disease - oxygen safety; Chronic obstructive airways disease - oxygen safety; Emphysema - oxygen safety; Heart failure - oxygen-safety; Palliative care - oxygen safety; Hospice - oxygen safety

  5. Drug Safety

    Science.gov (United States)

    ... over-the-counter drug. The FDA evaluates the safety of a drug by looking at Side effects ... clinical trials The FDA also monitors a drug's safety after approval. For you, drug safety means buying ...

  6. Auto Safety

    Science.gov (United States)

    ... to Talk to Your Child About the News Gun Safety Too Late for the Flu Vaccine? Eating ... many local health departments, public safety groups, hospitals, law enforcement agencies, and fire departments have technicians or ...

  7. Water Safety

    Science.gov (United States)

    ... School Counselors Kidney Stones Brain and Nervous System Water Safety KidsHealth > For Teens > Water Safety Print A ... tied to alcohol use. previous continue At the Water Park OK, so you do more splashing than ...

  8. Safety Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Swan Lake National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify...

  9. Water Safety

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Water Safety KidsHealth / For Parents / Water Safety What's in ... remains your best measure of protection. Making Kids Water Wise It's important to teach your kids proper ...

  10. Fire safety

    Science.gov (United States)

    Robert H. White; Mark A. Dietenberger

    1999-01-01

    Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Since basic data on fire behavior of wood products...

  11. Safety Training: Basic safety courses

    CERN Document Server

    Laetitia Laddada

    2004-01-01

    Safety Training: Basic safety courses Due to the 50th anniversary events, basic safety courses are cancelled  during  week 43. We remind that in general, courses take place each Tuesday morning in French and Tuesday afternoon in English in Bdg.65-1-003. The duration of the course is 1h30. There are two half day sessions: 9 a.m. and 11 a.m. in French, and 2 p.m. and 4 p.m. in English. Thanks for your  understanding.  SC-DI FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

  12. Safety; Avertissement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This annual report of the Senior Inspector for the Nuclear Safety, analyses the nuclear safety at EDF for the year 1999 and proposes twelve subjects of consideration to progress. Five technical documents are also provided and discussed concerning the nuclear power plants maintenance and safety (thermal fatigue, vibration fatigue, assisted control and instrumentation of the N4 bearing, 1300 MW reactors containment and time of life of power plants). (A.L.B.)

  13. Visit safety

    CERN Multimedia

    2012-01-01

    Experiment areas, offices, workshops: it is possible to have co-workers or friends visit these places.     You already know about the official visits service, the VIP office, and professional visits. But do you know about the safety instruction GSI-OHS1, “Visits on the CERN site”? This is a mandatory General Safety Instruction that was created to assist you in ensuring safety for all your visits, whatever their nature—especially those that are non-official. Questions? The HSE Unit will be happy to answer them. Write to safety-general@cern.ch.   The HSE Unit

  14. Nuclear Safety

    Energy Technology Data Exchange (ETDEWEB)

    Silver, E G [ed.

    1989-01-01

    This document is a review journal that covers significant developments in the field of nuclear safety. Its scope includes the analysis and control of hazards associated with nuclear energy, operations involving fissionable materials, and the products of nuclear fission and their effects on the environment. Primary emphasis is on safety in reactor design, construction, and operation; however, the safety aspects of the entire fuel cycle, including fuel fabrication, spent-fuel processing, nuclear waste disposal, handling of radioisotopes, and environmental effects of these operations, are also treated.

  15. Vaccine Safety

    Science.gov (United States)

    ... Search Form Controls Cancel Submit Search The CDC Vaccine Safety Note: Javascript is disabled or is not ... CDC.gov . Recommend on Facebook Tweet Share Compartir Vaccine Adverse Events Reporting System (VAERS) New website and ...

  16. Food safety

    Science.gov (United States)

    Poor food safety practices can lead to foodborne illness. Symptoms of foodborne illnesses vary. They usually include stomach problems or stomach upset. Foodborne illnesses may be severe and fatal. Young children, older ...

  17. Robots' Safety

    OpenAIRE

    Pirttilahti, Juho

    2016-01-01

    Human-robot-collaboration is considered one of the answers to the flexible needs of more and more customizing manufacturing. Its purpose is to fit together the best qualities of both human and robots to reduce the cost and time of manufacturing. One of the key questions in this area is safety. The purpose of this thesis was to define the required safety functionality of cartesian, delta and articulated robots based on the current machine needs. Using the future robotic concepts investigat...

  18. Safety first!

    CERN Multimedia

    2016-01-01

    Among the many duties I assumed at the beginning of the year was the ultimate responsibility for Safety at CERN: the responsibility for the physical safety of the personnel, the responsibility for the safe operation of the facilities, and the responsibility to ensure that CERN acts in accordance with the highest standards of radiation and environmental protection.   The Safety Policy document drawn up in September 2014 is an excellent basis for the implementation of Safety in all areas of CERN’s work. I am happy to commit during my mandate to help meet its objectives, not least by ensuring the Organization makes available the necessary means to achieve its Safety objectives. One of the main objectives of the HSE (Occupational Health and Safety and Environmental Protection) unit in the coming months is to enhance the measures to minimise CERN’s impact on the environment. I believe CERN should become a role model for an environmentally-aware scientific research laboratory. Risk ...

  19. SAFETY INSTRUCTION AND SAFETY NOTE

    CERN Multimedia

    TIS Secretariat

    2002-01-01

    Please note that the SAFETY INSTRUCTION N0 49 (IS 49) and the SAFETY NOTE N0 28 (NS 28) entitled respectively 'AVOIDING CHEMICAL POLLUTION OF WATER' and 'CERN EXHIBITIONS - FIRE PRECAUTIONS' are available on the web at the following urls: http://edms.cern.ch/document/335814 and http://edms.cern.ch/document/335861 Paper copies can also be obtained from the TIS Divisional Secretariat, email: TIS.Secretariat@cern.ch

  20. System safety education focused on flight safety

    Science.gov (United States)

    Holt, E.

    1971-01-01

    The measures necessary for achieving higher levels of system safety are analyzed with an eye toward maintaining the combat capability of the Air Force. Several education courses were provided for personnel involved in safety management. Data include: (1) Flight Safety Officer Course, (2) Advanced Safety Program Management, (3) Fundamentals of System Safety, and (4) Quantitative Methods of Safety Analysis.

  1. Playground Safety.

    Science.gov (United States)

    Sipes, James L.

    2000-01-01

    Discusses the issues of risk, liability, and fun when landscaping playgrounds with safety in mind. The importance of playground surfaces and several preventive measures landscapers can use to reduce the risk of injury are discussed. Concluding comments address playground design features and liability. (GR)

  2. Safety Resources.

    Science.gov (United States)

    Hoot, James L.; Bartkowiak, Elaine T.

    1994-01-01

    Lists 72 organizations and programs that deal with child safety, grouped by the following categories: (1) general; (2) general violence; (3) gun violence; (4) media violence; (5) drugs and alcohol; (6) child abuse and at-risk children; (7) parenting programs; (8) community service programs; (9) leadership programs; (10) peer counseling; (11)…

  3. Patient safety

    African Journals Online (AJOL)

    medical error and patient harm. The patient safety movement is now 13 years old, led by the publication of the US. Institute of Medicine (IOM) Report To Err is Human.1 The basic premise at the time was that annually up to 98 000 Americans were estimated to have died because of medical error (although this calculation.

  4. Safety Note

    CERN Multimedia

    SC Secretariat

    2004-01-01

    Please note that the Safety Note no 29 (NS 29) entitled 'Fire Prevention for Insulating Core (Sandwich) Panel Structures for Inside Use Guidelines for Selection, Installation and Use' is available on the web at the following url: https://edms.cern.ch/document/475438/LAST_RELEASED Paper copies can also be obtained from the SC Unit secretariat, e-mail : sc.secretariat@cern.ch SC Secretariat

  5. Nuclear safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Nuclear Safety comprehends Radioprotection, Radioactive Waste Management and Nuclear Material Control. These activities are developed at the Nuclear Safety Directory. The Radioactive Waste Management Department (GRR) was formally created in 1983, to promote research and development, teaching and service activities in the field of radioactive waste. Its mission is to develop and employ technologies to manage safely the radioactive wastes generated at IPEN and at its customer’s facilities all over the country, in order to protect the health and the environment of today's and future generations. The Radioprotection Service (GRP) aims primarily to establish requirements for the protection of people, as workers, contractors, students, members of the general public and the environment from harmful effects of ionizing radiation. Furthermore, it also aims to establish the primary criteria for the safety of radiation sources at IPEN and planning and preparing for response to nuclear and radiological emergencies. The procedures about the management and the control of exposures to ionizing radiation are in compliance with national standards and international recommendations. Research related to the main activities is also performed. The Nuclear Material Control has been performed by the Safeguard Service team, which manages the accountability and the control of nuclear material at IPEN facilities and provides information related to these activities to ABACC and IAEA. (author)

  6. Food safety

    OpenAIRE

    VRABCOVÁ, Kateřina

    2012-01-01

    In the diploma thesis I was dealing with the issue of food safety in the Czech Republic and labeling of meat products. In the practical part were carried out two surveys, public opinion poll and survey of proper labeling of meat products. Opinion polls were attended by 462 consumers and analysis of proper labelling was subjected to 489 meat products in select retail chains in Prague. Survey results of labeling of meat products were not very positive, but can be expected to improve, as well as...

  7. Safety training

    CERN Document Server

    SC Unit

    2009-01-01

    Habilitation électrique A course entitled "Habilitation électrique pour personnel de laboratoire" (electrical safety qualification for laboratory personnel) will be held on 22 and 23 June. Registration by e-mail to isabelle.cusato@cern.ch. Explosion Hazards in the handling of flammable solvents and gases A course entitled "Explosion Hazards in the handling of flammable solvents and gases" given in French will be held on 18-19 June 2009. This course is obligatory for all FGSOs at CERN, and it is recommended for anyone handling flammable gas or solvents. To sign up please visit this page. For more information please contact Isabelle Cusato, tel. 73811.

  8. Safety first

    CERN Multimedia

    2012-01-01

    Safety is a priority for CERN. That is a message I conveyed in my New Year’s address and that I reiterated at one of the first Enlarged Directorate meetings of 2012 when I outlined five key safety objectives for the year, designed and implemented according to accepted international standards.   As we move from spring to summer, it’s time to take stock of how we are doing. Objective number one for 2012, which overarches everything else, is to limit the number of incidents in the workplace. That means systematically investigating and acting on every incident that involves work stoppage, along with all the most frequent workplace accidents: falls, trips and slips. The performance indicator we set ourselves is the percentage of investigations and follow-ups completed. Year on year, these figures are rising but we can never be complacent, and must strive to reach and sustain 100% follow-up. The second objective is to improve hazard control, with a focus in 2012 on chemical ha...

  9. Construction safety

    CERN Document Server

    Li, Rita Yi Man

    2013-01-01

    A close-to-ideal blend of suburb and city, speedy construction of towers of Babylon, the sparkling proportion of glass and steel buildings’ facade at night showcase the wisdom of humans. They also witness the footsteps, sweats and tears of architects and engineers. Unfortunately, these signatures of human civilizations are swathed in towering figures of construction accidents. Fretting about these on sites, different countries adopt different measures on sites. This book firstly sketches the construction accidents on sites, followed by a review on safety measures in some of the developing countries such as Bermuda, Egypt, Kuwait and China; as well as developed countries, for example, the United States, France and Singapore. It also highlights the enormous compensation costs with the courts’ experiences in the United Kingdom and Hong Kong.

  10. Safety first

    Energy Technology Data Exchange (ETDEWEB)

    Harvie, W.

    1997-06-01

    Expansion of international business opportunities for Canadian producers and service companies brings with it a dimension almost never considered on home base - security. It was pointed out that once abroad, safety and defence of people and equipment can become significant problems in many parts of the world. The nature of the security risks involved, and how best to deal with them, were discussed. The use of consultants, mostly foreign ones to date, and the kind of assistance they can provide, everything from written reports on the local situation to counter surveillance training, and bodyguard services, have been described. Examples of recent involvements with guerilla groups demanding `revolutionary war taxes`, kidnapping executives for ransom, due diligence investigations of potential partners, and the like, have been provided to illustrate the unique character of the problem, and the constant need for being alert, educated to risks, and being prepared to react to risk situations.

  11. Global safety

    Directory of Open Access Journals (Sweden)

    Dorien J. DeTombe

    2010-08-01

    Full Text Available Global Safety is a container concept referring to various threats such as HIV/Aids, floods and terrorism; threats with different causes and different effects. These dangers threaten people, the global economy and the slity of states. Policy making for this kind of threats often lack an overview of the real causes and the interventions are based on a too shallow analysis of the problem, mono-disciplinary and focus mostly only on the effects. It would be more appropriate to develop policy related to these issues by utilizing the approaches, methods and tools that have been developed for complex societal problems. Handling these complex societal problems should be done multidisciplinary instead of mono-disciplinary. In order to give politicians the opportunity to handle complex problems multidisciplinary, multidisciplinary research institutes should be created. These multidisciplinary research institutes would provide politicians with better approaches to handle this type of problem. In these institutes the knowledge necessary for the change of these problems can be created through the use of the Compram methodology which has been developed specifically for handling complex societal problems. In a six step approach, experts, actors and policymakers discuss the content of the problem and the possible changes. The framework method uses interviewing, the Group Decision Room, simulation models and scenario's in a cooperative way. The methodology emphasizes the exchange of knowledge and understanding by communication among and between the experts, actors and politicians meanwhile keeping emotion in mind. The Compram methodology will be further explained in relation to global safety in regard to terrorism, economy, health care and agriculture.

  12. Linking Safety Analysis to Safety Requirements

    DEFF Research Database (Denmark)

    Hansen, Kirsten Mark

    Software for safety critical systems must deal with the hazards identified by safety analysistechniques: Fault trees, event trees,and cause consequence diagrams can be interpreted as safety requirements and used in the design activity. We propose that the safety analysis and the system design use...... the same system model and that this model is formalized in a real-time, interval logic, based on a conventional dynamic systems model with a state over time. The three safety analysis techniques are interpreted in this model and it is shown how to derive safety requirements for components of a system....

  13. CERN's new safety policy

    CERN Multimedia

    2014-01-01

    The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

  14. Rebuilding a safety culture

    Science.gov (United States)

    Rodney, George A.

    1991-01-01

    The development of a culture of safety and NASA since the Challenger accident is reviewed. The technical elements of the strengthened NASA safety program are described, including problem reporting, risk/assessment/risk management, operational safety, and safety assurance are addressed. Future directions in the development of safety are considered.

  15. A major safety overhaul

    CERN Multimedia

    2003-01-01

    A redefined policy, a revamped safety course, an environmental project... the TIS (Technical Inspection and Safety) Division has begun a major safety overhaul. Its new head, Wolfgang Weingarten, explains to the Bulletin why and how this is happening.

  16. Bathroom safety - adults

    Science.gov (United States)

    Older adult bathroom safety; Falls - bathroom safety ... You may need to have safety bars in your bathroom. These grab bars should be secured vertically or horizontally to the wall, not diagonally. DO NOT use ...

  17. Bromine Safety

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, B

    2001-04-09

    The production and handling in 1999 of about 200 million kilograms of bromine plus substantial derivatives thereof by Great Lakes Chemical Corp. and Albemarle Corporation in their southern Arkansas refineries gave OSHA Occupational Injury/Illness Rates (OIIR) in the range of 0.74 to 1.60 reportable OIIRs per 200,000 man hours. OIIRs for similar industries and a wide selection of other U.S. industries range from 1.6 to 23.9 in the most recent OSHA report. Occupational fatalities for the two companies in 1999 were zero compared to a range in the U.S.of zero for all computer manufacturing to 0.0445 percent for all of agriculture, forestry and fishing in the most recent OSHA report. These results show that bromine and its compounds can be considered as safe chemicals as a result of the bromine safety standards and practices at the two companies. The use of hydrobromic acid as an electrical energy storage medium in reversible PEM fuel cells is discussed. A study in 1979 of 20 megawatt halogen working fluid power plants by Oronzio de Nora Group found such energy to cost 2 to 2.5 times the prevailing base rate at that time. New conditions may reduce this relative cost. The energy storage aspect allows energy delivery at maximum demand times where the energy commands premium rates. The study also found marginal cost and performance advantages for hydrobromic acid over hydrochloric acid working fluid. Separate studies in the late 70s by General Electric also showed marginal performance advantages for hydrobromic acid.

  18. Eye Protection: Safety Glasses. Safety Spotlight

    Science.gov (United States)

    Deck, Anita; Roy, Ken

    2017-01-01

    When it comes to eye safety, there are some situations in which regular safety glasses will work adequately for the needs of the STEM education classroom or laboratory. However, there are certain instances in which safety goggles must be used for safer protection. Taking the time to analyze hazards and assess the risks prior to any activity in the…

  19. Nuclear criticality safety guide

    Energy Technology Data Exchange (ETDEWEB)

    Pruvost, N.L.; Paxton, H.C. [eds.

    1996-09-01

    This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators.

  20. Farm Health and Safety

    Science.gov (United States)

    ... jobs in the United States. Farms have many health and safety hazards, including Chemicals and pesticides Machinery, ... equipment can also reduce accidents. Occupational Safety and Health Administration

  1. New Safety rules

    CERN Multimedia

    Safety Commission

    2008-01-01

    The revision of CERN Safety rules is in progress and the following new Safety rules have been issued on 15-04-2008: Safety Procedure SP-R1 Establishing, Updating and Publishing CERN Safety rules: http://cern.ch/safety-rules/SP-R1.htm; Safety Regulation SR-S Smoking at CERN: http://cern.ch/safety-rules/SR-S.htm; Safety Regulation SR-M Mechanical Equipment: http://cern.ch/safety-rules/SR-M.htm; General Safety Instruction GSI-M1 Standard Lifting Equipment: http://cern.ch/safety-rules/GSI-M1.htm; General Safety Instruction GSI-M2 Standard Pressure Equipment: http://cern.ch/safety-rules/GSI-M2.htm; General Safety Instruction GSI-M3 Special Mechanical Equipment: http://cern.ch/safety-rules/GSI-M3.htm. These documents apply to all persons under the Director General’s authority. All Safety rules are available at the web page: http://www.cern.ch/safety-rules The Safety Commission

  2. Patient safety: Safety culture and patient safety ethics

    DEFF Research Database (Denmark)

    Madsen, Marlene Dyrløv

    2006-01-01

    Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... the problems, and suggest possible solutions for improving patient safety through the promotion of safety culture and ethics. I seek to illuminate theissues of patient safety from several perspectives; the organizational healthcare system, in particular the healthcare workers perspectives and experiences......, and those of patients who experience the physical effect of poor patient safety. The dissertationconsists of nine papers and an appendix. Paper 1 describes the results of doctors and nurses attitudes towards reporting and the handling of adverse events. Paper 2 is a study and “review” of the international...

  3. Safety at CERN

    CERN Multimedia

    2009-01-01

    Safety is an integral part of our working lives, and should be in our minds whatever job we do at CERN. Ultimately, safety is the responsibility of the Director General – your safety is my concern. That’s why I have this week appointed a new Safety Policy Committee (SAPOCO) that reflects the new Organizational structure of CERN. CERN’s Staff Rules and Regulations clearly lay out in chapter 3 the scope of safety at CERN as well as my responsibilities and yours in safety matters. At CERN, safety is considered in the broadest sense, encompassing occupational Health and Safety, environmental protection, and the safety of equipment and installations. It is my responsibility to put appropriate measures in place to ensure that these conditions are met. And it is the responsibility of us all to ensure that we are fully conversant with safety provisions applicable in our areas of work and that we comply with them. The appointment of a n...

  4. TWRS safety program plan

    Energy Technology Data Exchange (ETDEWEB)

    Calderon, L.M., Westinghouse Hanford

    1996-08-01

    Management of Nuclear Safety, Industrial Safety, Industrial Hygiene, and Fire Protection programs, functions, and field support resources for Tank Waste Remediation Systems (TWRS) has, until recently, been centralized in TWRS Safety, under the Emergency, Safety, and Quality organization. Industrial hygiene technician services were also provided to support operational needs related to safety basis compliance. Due to WHC decentralization of safety and reengineering efforts in West Tank Farms, staffing and safety responsibilities have been transferred to the facilities. Under the new structure, safety personnel for TWRS are assigned directly to East Tank Farms, West Tank Farms, and a core Safety Group in TWRS Engineering. The Characterization Project Operations (CPO) safety organization will remain in tact as it currently exists. Personnel assigned to East Tank Farms, West Tank Farms, and CPO will perform facility-specific or project-specific duties and provide field implementation of programs. Those assigned to the core group will focus on activities having a TWRS-wide or programmatic focus. Hanford-wide activities will be the responsibility of the Safety Center of Expertise. In order to ensure an effective and consistent safety program for TWRS under the new organization program functions, goals, organizational structure, roles, responsibilities, and path forward must be clearly established. The purpose of the TWRS Safety Program Plan is to define the overall safety program, responsibilities, relationships, and communication linkages for safety personnel under the new structure. In addition, issues associated with reorganization transition are addressed, including training, project ownership, records management, and dissemination of equipment. For the purpose of this document ``TWRS Safety`` refers to all safety professionals and technicians (Industrial Safety, Industrial Hygiene, Fire Protection, and Nuclear Safety) within the TWRS organization, regardless of their

  5. Occupational safety motivation

    DEFF Research Database (Denmark)

    Pedersen, Louise; Kines, Pete

    2010-01-01

    Background: Motivation is one of the most important factors for safety behaviour and for implementing change in general. However, theoretical and psychometric studies of safety performance have traditionally treated safety motivation, safety compliance and safety participation unidimensionally....... At the same time many motivation questionnaire items are seldom founded on theory and/or do not account for the theories’ ontological and epistemological differences, e.g. of how knowledge, attitude and action are related. Present questionnaire items tap into occupational safety motivation in asking whether...... or not respondents ‘are’ motivated and whether they feel that safety is important or worthwhile. Another important aspect is ‘what’ motivates workers to comply to and participate in safety. The aim of this article is to introduce a new theory-based occupational safety motivation scale which is validated...

  6. Beyond safety accountability

    CERN Document Server

    Geller, E Scott

    2001-01-01

    Written in an easy-to-read conversational tone, Beyond Safety Accountability explains how to develop an organizational culture that encourages people to be accountable for their work practices and to embrace a higher sense of personal responsibility. The author begins by thoroughly explaining the difference between safety accountability and safety responsibility. He then examines the need of organizations to improve safety performance, discusses why such performance improvement can be achieved through a continuous safety process, as distinguished from a safety program, and provides the practic

  7. Safety-in-numbers

    DEFF Research Database (Denmark)

    Elvik, Rune; Bjørnskau, Torkel

    2017-01-01

    Highlights •26 studies of the safety-in-numbers effect are reviewed. •The existence of a safety-in-numbers effect is confirmed. •Results are consistent. •Causes of the safety-in-numbers effect are incompletely known.......Highlights •26 studies of the safety-in-numbers effect are reviewed. •The existence of a safety-in-numbers effect is confirmed. •Results are consistent. •Causes of the safety-in-numbers effect are incompletely known....

  8. Road safety rhetoric versus road safety politics.

    Science.gov (United States)

    Køltzow, K

    1993-12-01

    In-depth interviews with top level decision makers in the road sector in Norway were conducted over a four-year period: Three principal impediments to safety interventions were identified: (i) Mobility is considered of primary importance; the "freedom of the car" is difficult to restrict, (ii) as a consequence there is much more lobbying for mobility than for safety, and (iii) road safety commitment and policies are weak, even among some of those responsible. For these reasons, efficient road safety work is often side-tracked at the top level, and substituted by nonbinding demands for road users' "change of attitude". In addition, road safety is often used as a proxy argument for measures that mainly promote mobility.

  9. Safety KPIs - Monitoring of safety performance

    Directory of Open Access Journals (Sweden)

    Andrej Lališ

    2014-09-01

    Full Text Available This paper aims to provide brief overview of aviation safety development focusing on modern trends represented by implementation of Safety Key Performance Indicators. Even though aviation is perceived as safe means of transport, it is still struggling with its complexity given by long-term growth and robustness which it has reached today. Thus nowadays safety issues are much more complex and harder to handle than ever before. We are more and more concerned about organizational factors and control mechanisms which have potential to further increase level of aviation safety. Within this paper we will not only introduce the concept of Key Performance Indicators in area of aviation safety as an efficient control mechanism, but also analyse available legislation and documentation. Finally we will propose complex set of indicators which could be applied to Czech Air Navigation Service Provider.

  10. Patient safety: Safety culture and patient safety ethics

    OpenAIRE

    Madsen, Marlene Dyrløv

    2006-01-01

    Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of resear...

  11. National Safety Council

    Science.gov (United States)

    ... Practical Solutions & Training Tools Online Learning Safety Awards & Recognition Publications, Library & Research Get Support for Safety Membership Logos Networking & Additional Resources Member Appreciation Month NSC Division Networks Alcohol & Drug Impairment Business & ...

  12. Car Seat Safety

    Science.gov (United States)

    ... to Talk to Your Child About the News Gun Safety Too Late for the Flu Vaccine? Eating ... many local health departments, public safety groups, hospitals, law enforcement agencies, and fire departments have technicians or ...

  13. Flu Vaccine Safety Information

    Science.gov (United States)

    ... Types Seasonal Avian Swine/Variant Pandemic Other Flu Vaccine Safety Information Questions & Answers Language: English (US) Español ... of flu vaccines monitored? Egg Allergy Are flu vaccines safe? Flu vaccines have good safety record. Hundreds ...

  14. Fires and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... Viewer (JSR 286) Actions ${title} Loading... Fires and Food Safety Fire! Few words can strike such terror. Residential ...

  15. Freezing and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... Viewer (JSR 286) Actions ${title} Loading... Freezing and Food Safety What Can You Freeze? Is Frozen Food Safe? ...

  16. Fire Safety (For Parents)

    Science.gov (United States)

    ... of Braces Eating Disorders Mitral Valve Prolapse Arrhythmias Fire Safety KidsHealth > For Parents > Fire Safety Print A ... event of a fire emergency in your home. Fire Prevention Of course, the best way to practice ...

  17. Refrigeration and Food Safety

    Science.gov (United States)

    ... Forms Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District ... 286) Actions ${title} Loading... Refrigeration and Food Safety History of Refrigeration Importance of Refrigeration Types of Bacteria ...

  18. National Patient Safety Foundation

    Science.gov (United States)

    ... News Member Testimonials Lifetime Members Stand Up for Patient Safety Welcome Stand Up Members Stand Up e-News ... PLS Webcast Archives Stand Up Templates and Logos Patient Safety Coalition Coalition Overview Coalition Member Roster Members-Only ...

  19. Water safety and drowning

    Science.gov (United States)

    ... among people of all ages. Learning and practicing water safety is important to prevent drowning accidents. ... Water safety tips for all ages include: Learn CPR . Never swim alone. Never dive into water unless ...

  20. Animal Product Safety Information

    Science.gov (United States)

    ... Vaccines, Blood & Biologics Animal & Veterinary Cosmetics Tobacco Products Animal & Veterinary Home Animal & Veterinary Safety & Health Product Safety ... for more information. How to report when your animal has a bad reaction to a drug the ...

  1. DOE handbook electrical safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    Electrical Safety Handbook presents the Department of Energy (DOE) safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety guidance and information for DOE installations to effect a reduction or elimination of risks associated with the use of electrical energy. The objectives of this handbook are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  2. Electrical safety guidelines

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

  3. General safety considerations

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    This document presents the full filling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 4 of the document contains some details about the priority to safety, financial and human resources, human factors, quality assurance, safety assessment and verification, radiation protection and emergency preparedness.

  4. Improving patient safety culture

    NARCIS (Netherlands)

    Hellings, Johan; Schrooten, Ward; Klazinga, Niek S.; Vleugels, Arthur

    2010-01-01

    PURPOSE: Improving hospital patient safety means an open and stimulating culture is needed. This article aims to describe a patient safety culture improvement approach in five Belgian hospitals. DESIGN/METHODOLOGY/APPROACH: Patient safety culture was measured using a validated Belgian adaptation of

  5. Leadership and safety culture. Leadership for safety

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Erwin; Nithack, Eckhard [PreussenElektra GmbH, Hannover (Germany)

    2016-08-15

    The meaning of leadership for safety in the nuclear industry is pointed out. This topic has became an increasing rank since the German ''Energiewende''. Despite the phase-out of the German NPP's nuclear safety and the belonging safety culture needs to be well maintained. A challenge for the whole organisation. Following the challenge to operate nuclear power plants towards Operational Excellence a highly skilled and motivated organisation is needed. Therefore Leadership is a valuable success factor.

  6. Safety culture : a significant influence on safety in transportation

    Science.gov (United States)

    2017-08-01

    An organizations safety culture can influence safety outcomes. Research and experience show that when safety culture is strong, accidents are less frequent and less severe. As a result, building and maintaining strong safety cultures should be a t...

  7. Nuclear safety in perspective

    DEFF Research Database (Denmark)

    Andersson, K.; Sjöberg, B.M.D.; Lauridsen, Kurt

    2003-01-01

    The aim of the NKS/SOS-1 project has been to enhance common understanding about requirements for nuclear safety by finding improved means of communicat-ing on the subject in society. The project, which has been built around a number of seminars, wassupported by limited research in three sub......-projects: Risk assessment Safety analysis Strategies for safety management The report describes an industry in change due to societal factors. The concepts of risk and safety, safety management and systems forregulatory oversight are de-scribed in the nuclear area and also, to widen the perspective, for other...

  8. Uncertain safety: allocating responsibilities for safety

    National Research Council Canada - National Science Library

    2009-01-01

    Flood prevention, food safety, the transport of hazardous substances, infectious diseases, the risk of new Technologies and many other threats to public health and the environment call for ongoing public alertness...

  9. Workplace Safety and Health Topics: Safety & Prevention

    Science.gov (United States)

    ... Childhood Agricultural Injury Prevention Control Banding Controls for Noise Exposure Cost-effective Rollover Protective Structures (CROPS) Direct Reading and Sensor Technologies Distracted Driving at Work Electrical Safety Electronic Health Records (EHRs) and Patient ...

  10. Safety in Cryogenics – Safety device sizing

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The calculation is separated in three operations: o The estimation of the loads arriving on the component to protect, o The calculation of the mass flow to evacuate, o And the sizing of the safety device.

  11. Patient Safety Culture

    DEFF Research Database (Denmark)

    Kristensen, Solvejg

    Patient safety is highly prioritised in the Danish health care system, never the less, patients are still exposed to risk and harmed every day. Implementation of a patient safety culture has been suggested an effective mean to protect patients against adverse events. Working strategically...... with assessment and development of the patient safety culture is in early days in Denmark. It depends upon valid, reliable and effective methods. The patient safety culture represents a wide range of social phenomena permeating the way of life in a health care. In essence, the safety culture is an aggregation...... of health care professional’s behaviour, habits, norms, values, and basic assumptions related to patient care; it is the way things are done. The patient safety culture guides the motivation, commitment to and know-how of the safety management, and how all members of a work place interact. This thesis...

  12. Formal Safety versus Real Safety: Quantitative and Qualitative Approaches to Safety Culture – Evidence from Estonia

    Directory of Open Access Journals (Sweden)

    Järvis Marina

    2016-10-01

    Full Text Available This paper examines differences between formal safety and real safety in Estonian small and medium-sized enterprises. The results reveal key issues in safety culture assessment. Statistical analysis of safety culture questionnaires showed many organisations with an outstanding safety culture and positive safety attitudes. However, qualitative data indicated some important safety weaknesses and aspects that should be included in the process of evaluation of safety culture in organisations.

  13. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

  14. Safety objectives for 2014

    CERN Multimedia

    HSE Unit

    2014-01-01

    This is the third year in which the CERN Management has presented annual safety objectives for the Organization, the “HSE Objectives”.   The HSE objectives for 2014, which were announced by the Director-General at his traditional New Year’s address to the staff and were presented at the first Enlarged Directorate meeting of the year, have been drawn up and agreed in close collaboration between the DSOs, the HSE Unit and the DG himself. From safety in the workplace to radiation and environmental protection, the document emphasises that “Safety is a priority for CERN” and that safety policy is a key element in how the Organization is run. And, like all policies, it generates objectives that “serve as a general framework for action”. The HSE objectives are broken down into the following fields: occupational health and safety on sites and in the workplace, radiation protection, radiation safety, environmental protection, emerge...

  15. Safety advice sheets

    CERN Multimedia

    HSE Unit

    2013-01-01

    You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

  16. Thermal reactor safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Information is presented concerning new trends in licensing; seismic considerations and system structural behavior; TMI-2 risk assessment and thermal hydraulics; statistical assessment of potential accidents and verification of computational methods; issues with respect to improved safety; human factors in nuclear power plant operation; diagnostics and activities in support of recovery; LOCA transient analysis; unresolved safety issues and other safety considerations; and fission product transport.

  17. Hydrogen Technologies Safety Guide

    Energy Technology Data Exchange (ETDEWEB)

    Rivkin, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Burgess, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Buttner, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    The purpose of this guide is to provide basic background information on hydrogen technologies. It is intended to provide project developers, code officials, and other interested parties the background information to be able to put hydrogen safety in context. For example, code officials reviewing permit applications for hydrogen projects will get an understanding of the industrial history of hydrogen, basic safety concerns, and safety requirements.

  18. Principles of electrical safety

    CERN Document Server

    Sutherland, Peter E

    2015-01-01

    Principles of Electrical Safety discusses current issues in electrical safety, which are accompanied by series' of practical applications that can be used by practicing professionals, graduate students, and researchers. .  Provides extensive introductions to important topics in electrical safety Comprehensive overview of inductance, resistance, and capacitance as applied to the human body Serves as a preparatory guide for today's practicing engineers

  19. Lift truck safety review

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C.

    1997-03-01

    This report presents safety information about powered industrial trucks. The basic lift truck, the counterbalanced sit down rider truck, is the primary focus of the report. Lift truck engineering is briefly described, then a hazard analysis is performed on the lift truck. Case histories and accident statistics are also given. Rules and regulations about lift trucks, such as the US Occupational Safety an Health Administration laws and the Underwriter`s Laboratories standards, are discussed. Safety issues with lift trucks are reviewed, and lift truck safety and reliability are discussed. Some quantitative reliability values are given.

  20. FOOD SAFETY TESTING LABORATORY

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory develops screening assays, tests and modifies biosensor equipment, and optimizes food safety testing protocols for the military and civilian sector...

  1. Training safely, Training safety

    Directory of Open Access Journals (Sweden)

    Jianjun Wu

    2014-09-01

    Full Text Available It is the basic requirement of maritime safety education to guarantee the safety of teaching operation while training the crew's occupation safety capability. Marine Training Center of Shanghai Maritime University has undertaken the practical teaching of "marine survival" for many years and come up with the whole safety procedures of training. Based on the requirements of SOLAS convention and regulations of STCW over crew training, this paper introduces the safety allocation, utilization and maintenance of teaching equipments. Through the investigation of the safety situation of students' practical operation, the safety teaching method named "four in one" has been put forward, which includes the pre-teaching safety precaution, the whole monitor during the teaching process, the post-teaching summary evaluation, and the reset and standby of teaching facilities. Finally, during the learning and training of "marine survival", crews and students are called on to place priority on personal safety rather than acquisition of knowledge and skills. Only in this way can they be capable of self-protection and protection of others in the career of seafaring.

  2. Improved safety at CERN

    CERN Multimedia

    2006-01-01

    As announced in Weekly Bulletin No. 43/2006, a new approach to the implementation of Safety at CERN has been decided, which required taking some managerial decisions. The guidelines of the new approach are described in the document 'New approach to Safety implementation at CERN', which also summarizes the main managerial decisions I have taken to strengthen compliance with the CERN Safety policy and Rules. To this end I have also reviewed the mandates of the Safety Commission and the Safety Policy Committee (SAPOCO). Some details of the document 'Safety Policy at CERN' (also known as SAPOCO42) have been modified accordingly; its essential principles, unchanged, remain the basis for the safety policy of the Organisation. I would also like to inform you that I have appointed Dr M. Bona as the new Head of the Safety Commission until 31.12.2008, and that I will proceed soon to the appointment of the members of the new Safety Policy Committee. All members of the personnel are deemed to have taken note of the d...

  3. Light water reactor safety

    CERN Document Server

    Pershagen, B

    2013-01-01

    This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

  4. A Silent Safety Program

    Science.gov (United States)

    Goodin, James Ronald

    2006-01-01

    NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

  5. Highway Safety Program Manual: Volume 3: Motorcycle Safety.

    Science.gov (United States)

    National Highway Traffic Safety Administration (DOT), Washington, DC.

    Volume 3 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on aspects of motorcycle safety. The purpose and specific objectives of a State motorcycle safety program are outlined. Federal authority in the highway safety area and general policies…

  6. Safety Training: basic safety and access courses

    CERN Multimedia

    2005-01-01

    Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various hazards existing on site, and how to recognise and avoid them. Safety course changes The current organisation of basic safety courses is changing. There will be two main modifications: the organisation of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organisational changes This concerns the existing basic safety training, currently called level 1, level 2 and level 3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, participants will systematically follow...

  7. Safety Training: Basic Safety and Access Courses

    CERN Multimedia

    Antonella Vignes

    2005-01-01

    Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various existing on-site hazards, and how to recognize and avoid them. Safety course changes The current organization for basic safety courses is changing. There will be two main modifications: the organization of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organizational changes This concerns the existing basic safety training, currently called level1, level2 and level3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, attendees will systematically follow the...

  8. Subjective safety in traffic.

    NARCIS (Netherlands)

    2012-01-01

    The term ‘subjective safety in traffic’ refers to people feeling unsafe in traffic or, more generally, to anxiety regarding being unsafe in traffic for oneself and/or others. Subjective safety in traffic can lead to road users limiting their mobility and social activities, which is one of the

  9. Aviation safety and ICAO

    NARCIS (Netherlands)

    Huang, Jiefang

    2009-01-01

    The thesis addresses the issue of aviation safety under the rule of law. Aviation safety is a global concern. While air transport is considered a safe mode of travel, it is susceptible to inherent risks of flight, the use of force, and terrorist acts. Consequently, within the framework of the

  10. Safety in Aquaculture

    Science.gov (United States)

    Durborow, Robert M.; Myers, Melvin L.

    2016-01-01

    In this article, occupational safety interventions for agriculture-related jobs, specifically in aquaculture, are reviewed. Maintaining quality of life and avoiding economic loss are two areas in which aquaculturists can benefit by incorporating safety protocols and interventions on their farms. The information in this article is based on farm…

  11. Nuclear safety in perspective

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, K. [Karinta-Konsult HB (Sweden); Sjoeberg, B.M.D. [Norwegian Univ. of Scince and Technology (Norway); Larudisen, K. [Risoe National Lab., Roskilde (Denmark); Wahlstroem, B. [VTT Automation (Finland)

    2002-06-01

    The aim of the NKS/SOS-1 project has been to enhance common understanding about requirements for nuclear safety by finding improved means of communicating on the subject in society. The project, which has been built around a number of seminars, was supported by limited research in three sub-projects: 1) Risk assessment, 2) Safety analysis, and 3) Strategies for safety management. The report describes an industry in change due to societal factors. The concepts of risk and safety, safety management and systems for regulatory oversight are described in the nuclear area and also, to widen the perspective, for other industrial areas. Transparency and public participation are described as key elements in good risk communication, and case studies are given. Environmental Impact Assessment and Strategic Environmental Assessment are described as important overall processes within which risk communication can take place. Safety culture, safety indicators and quality systems are important concepts in the nuclear safety area are very useful, but also offer important challenges for the future. They have been subject to special attention in the project. (au)

  12. Elements of nuclear safety

    CERN Document Server

    Libmann, Jacques

    1996-01-01

    This basically educational book is intended for all involved in nuclear facility safety. It dissects the principles and experiences conducive to the adoption of attitudes compliant with what is now known as "safety culture". This book is accessible to a wide range of readers.

  13. Safety analysis for `Fugen`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The improvement of safety in nuclear power stations is an important proposition. Therefore also as to the safety evaluation, it is important to comprehensively and systematically execute it by referring to the operational experience and the new knowledge which is important for the safety throughout the period of use as well as before the construction and the start of operation of nuclear power stations. In this report, the results when the safety analysis for ``Fugen`` was carried out by referring to the newest technical knowledge are described. As the result, it was able to be confirmed that the safety of ``Fugen`` has been secured by the inherent safety and the facilities which were designed for securing the safety. The basic way of thinking on the safety analysis including the guidelines to be conformed to is mentioned. As to the abnormal transient change in operation and accidents, their definition, the events to be evaluated and the standards for judgement are reported. The matters which were taken in consideration at the time of the analysis are shown. The computation programs used for the analysis were REACT, HEATUP, LAYMON, FATRAC, SENHOR, LOTRAC, FLOOD and CONPOL. The analyses of the abnormal transient change in operation and accidents are reported on the causes, countermeasures, protective functions and results. (K.I.)

  14. Safety in cardiac surgery

    NARCIS (Netherlands)

    Siregar, S.

    2013-01-01

    The monitoring of safety in cardiac surgery is a complex process, which involves many clinical, practical, methodological and statistical issues. The objective of this thesis was to measure and to compare safety in cardiac surgery in The Netherlands using the Netherlands Association for

  15. Safety Behaviors and Stuttering

    Science.gov (United States)

    Lowe, Robyn; Helgadottir, Fjola; Menzies, Ross; Heard, Rob; O'Brian, Sue; Packman, Ann; Onslow, Mark

    2017-01-01

    Purpose: Those who are socially anxious may use safety behaviors during feared social interactions to prevent negative outcomes. Safety behaviors are associated with anxiety maintenance and poorer treatment outcomes because they prevent fear extinction. Social anxiety disorder is often comorbid with stuttering. Speech pathologists reported in a…

  16. K Basin safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Porten, D.R.; Crowe, R.D.

    1994-12-16

    The purpose of this accident safety analysis is to document in detail, analyses whose results were reported in summary form in the K Basins Safety Analysis Report WHC-SD-SNF-SAR-001. The safety analysis addressed the potential for release of radioactive and non-radioactive hazardous material located in the K Basins and their supporting facilities. The safety analysis covers the hazards associated with normal K Basin fuel storage and handling operations, fuel encapsulation, sludge encapsulation, and canister clean-up and disposal. After a review of the Criticality Safety Evaluation of the K Basin activities, the following postulated events were evaluated: Crane failure and casks dropped into loadout pit; Design basis earthquake; Hypothetical loss of basin water accident analysis; Combustion of uranium fuel following dryout; Crane failure and cask dropped onto floor of transfer area; Spent ion exchange shipment for burial; Hydrogen deflagration in ion exchange modules and filters; Release of Chlorine; Power availability and reliability; and Ashfall.

  17. Formalizing Probabilistic Safety Claims

    Science.gov (United States)

    Herencia-Zapana, Heber; Hagen, George E.; Narkawicz, Anthony J.

    2011-01-01

    A safety claim for a system is a statement that the system, which is subject to hazardous conditions, satisfies a given set of properties. Following work by John Rushby and Bev Littlewood, this paper presents a mathematical framework that can be used to state and formally prove probabilistic safety claims. It also enables hazardous conditions, their uncertainties, and their interactions to be integrated into the safety claim. This framework provides a formal description of the probabilistic composition of an arbitrary number of hazardous conditions and their effects on system behavior. An example is given of a probabilistic safety claim for a conflict detection algorithm for aircraft in a 2D airspace. The motivation for developing this mathematical framework is that it can be used in an automated theorem prover to formally verify safety claims.

  18. Food Safety and Raw Milk

    Science.gov (United States)

    ... for Food Safety Get Ready to Grill Safely Protect Yourself When Eating Out Rules of the Game for Food Safety Safety Tips for Handling and Preparing Common Foods Steps to Safe and Healthy Fruits & Vegetables Social Media Graphics Food Safety Features Food Safety Newsletters Get ...

  19. Exploratory analysis of the safety climate and safety behavior relationship.

    Science.gov (United States)

    Cooper, M D; Phillips, R A

    2004-01-01

    Safety climate refers to the degree to which employees believe true priority is given to organizational safety performance, and its measurement is thought to provide an "early warning" of potential safety system failure(s). However, researchers have struggled over the last 25 years to find empirical evidence to demonstrate actual links between safety climate and safety performance. A safety climate measure was distributed to manufacturing employees at the beginning of a behavioral safety initiative and redistributed one year later. Multiple regression analysis demonstrated that perceptions of the importance of safety training were predictive of actual levels of safety behavior. The results also demonstrate that the magnitude of change in perceptual safety climate scores will not necessarily match actual changes (r=0.56, n.s.) in employee's safety behavior. This study obtained empirical links between safety climate scores and actual safety behavior. Confirming and contradicting findings within the extant safety climate literature, the results strongly suggest that the hypothesized climate-behavior-accident path is not as clear cut as commonly assumed. A statistical link between safety climate perceptions and safety behavior will be obtained when sufficient behavioral data is collected. The study further supports the use of safety climate measures as useful diagnostic tools in ascertaining employee's perceptions of the way that safety is being operationalized.

  20. Is Safety in Danger?

    DEFF Research Database (Denmark)

    Broncano-Berrocal, Fernando

    2014-01-01

    In “Knowledge Under Threat” (Philosophy and Phenomenological Research 2012), Tomas Bogardus proposes a counterexample to the safety condition for knowledge. Bogardus argues that the case demonstrates that unsafe knowledge is possible. I argue that the case just corroborates the well-known require...... offer a diagnosis of a common error about the kind of cases that are typically considered potential counterexamples to the necessity of the epistemic condition: proponents of the alleged counterexamples mistake a strong condition that I call super-safety for safety......In “Knowledge Under Threat” (Philosophy and Phenomenological Research 2012), Tomas Bogardus proposes a counterexample to the safety condition for knowledge. Bogardus argues that the case demonstrates that unsafe knowledge is possible. I argue that the case just corroborates the well......-known requirement that modal conditions like safety must be relativized to methods of belief formation. I explore several ways of relativizing safety to belief-forming methods and I argue that none is adequate: if methods were individuated in those ways, safety would fail to explain several much-discussed cases. I...

  1. Safety management practices and safety behaviour: assessing the mediating role of safety knowledge and motivation.

    Science.gov (United States)

    Vinodkumar, M N; Bhasi, M

    2010-11-01

    Safety management practices not only improve working conditions but also positively influence employees' attitudes and behaviours with regard to safety, thereby reducing accidents in workplace. This study measured employees' perceptions on six safety management practices and self-reported safety knowledge, safety motivation, safety compliance and safety participation by conducting a survey using questionnaire among 1566 employees belonging to eight major accident hazard process industrial units in Kerala, a state in southern part of India. The reliability and unidimesionality of all the scales were found acceptable. Path analysis using AMOS-4 software showed that some of the safety management practices have direct and indirect relations with the safety performance components, namely, safety compliance and safety participation. Safety knowledge and safety motivation were found to be the key mediators in explaining these relationships. Safety training was identified as the most important safety management practice that predicts safety knowledge, safety motivation, safety compliance and safety participation. These findings provide valuable guidance for researchers and practitioners for identifying the mechanisms by which they can improve safety of workplace. 2010 Elsevier Ltd. All rights reserved.

  2. Managing electrical safety

    CERN Document Server

    Wiggins, James H, Jr

    2001-01-01

    Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

  3. LTE for public safety

    CERN Document Server

    Liebhart, Rainer; Wong, Curt; Merkel , Jürgen

    2015-01-01

    The aim of the book is to educate government agencies, operators, vendors and other regulatory institutions how LTE can be deployed to serve public safety market and offer regulatory / public safety features. It is written in such a way that it can be understood by both technical and non-technical personnel with just introductory knowledge in wireless communication. Some sections and chapters about public safety services offered by LTE network are intended to be understood by anyone with no knowledge in wireless communication.

  4. Safety shutdown separators

    Science.gov (United States)

    Carlson, Steven Allen; Anakor, Ifenna Kingsley; Farrell, Greg Robert

    2015-06-30

    The present invention pertains to electrochemical cells which comprise (a) an anode; (b) a cathode; (c) a solid porous separator, such as a polyolefin, xerogel, or inorganic oxide separator; and (d) a nonaqueous electrolyte, wherein the separator comprises a porous membrane having a microporous coating comprising polymer particles which have not coalesced to form a continuous film. This microporous coating on the separator acts as a safety shutdown layer that rapidly increases the internal resistivity and shuts the cell down upon heating to an elevated temperature, such as 110.degree. C. Also provided are methods for increasing the safety of an electrochemical cell by utilizing such separators with a safety shutdown layer.

  5. Nuclear regulation and safety

    Energy Technology Data Exchange (ETDEWEB)

    Hendrie, J.M.

    1982-01-01

    Nuclear regulation and safety are discussed from the standpoint of a hypothetical country that is in the process of introducing a nuclear power industry and setting up a regulatory system. The national policy is assumed to be in favor of nuclear power. The regulators will have responsibility for economic, reliable electric production as well as for safety. Reactor safety is divided into three parts: shut it down, keep it covered, take out the afterheat. Emergency plans also have to be provided. Ways of keeping the core covered with water are discussed. (DLC)

  6. Systems Safety and Engineering Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Systems Safety and Engineering Division conducts engineering, research, and analysis to improve transportation safety, capacity, and resiliency. We provide...

  7. MRI Safety during Pregnancy

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z MRI Safety During Pregnancy Magnetic resonance imaging (MRI) Illness ... during the exam? Contrast material MRI during pregnancy Magnetic resonance imaging (MRI) If you are pregnant and your doctor ...

  8. Carbon Monoxide Safety

    Science.gov (United States)

    ... 189 KB Public service announcement: winter fire safety Stock photography Use these free, high resolution photos to ... Twitter Facebook Twitter Fire Prevention and Public Education Exchange The Exchange is a collection of national, state ...

  9. Vaccine Safety Datalink

    Science.gov (United States)

    The Vaccine Safety Datalink is part of the National Immunization Program within the Centers for Disease Control and Prevention and was started in recognition of gaps in the scientific knowledge of rare vaccine side effects.

  10. Medical Device Safety

    Science.gov (United States)

    ... Communication Date FDA Warns Against Use of Injectable Silicone for Body Contouring and Enhancement: FDA Safety Communication ... 03/18/17 Neurovascular Thrombus Retrieval Catheters and Guide Catheters Used During Neurological Interventional Procedures: Differences in ...

  11. Organizational Culture and Safety

    Science.gov (United States)

    Adams, Catherine A.

    2003-01-01

    '..only a fool perseveres in error.' Cicero. Humans will break the most advanced technological devices and override safety and security systems if they are given the latitude. Within the workplace, the operator may be just one of several factors in causing accidents or making risky decisions. Other variables considered for their involvement in the negative and often catastrophic outcomes include the organizational context and culture. Many organizations have constructed and implemented safety programs to be assimilated into their culture to assure employee commitment and understanding of the importance of everyday safety. The purpose of this paper is to examine literature on organizational safety cultures and programs that attempt to combat vulnerability, risk taking behavior and decisions and identify the role of training in attempting to mitigate unsafe acts.

  12. Laser safety in dentistry.

    Science.gov (United States)

    Sweeney, Caroline

    2008-01-01

    Although many regulations and standards relating to laser safety are in effect, there continue to be an average of 35 laser injuries per year. Laser safety professionals believe that this number under-represents the actual number of injuries and that many more accidents per year occur that are not documented with federal agencies. A review of these accidents has determined that failing to wear available eye protection is one of the most frequent contributing factors to laser injuries. As the purchase and use of lasers in dentistry continues to grow, so must concern for laser safety. This article provides basic information to advance the safe use of lasers in dentistry and to help establish laser safety protocols for the dental office.

  13. Injury & Safety Report - Legacy

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Injury & Safety Report is a mandatory post trip legal document observers fill out to report any injuries they have incurred, illnesses they have had, or...

  14. Winter Weather: Outdoor Safety

    Science.gov (United States)

    ... or Traumatic Event Resources for Families Resources for Leaders Resources for State and Local Governments Emergency Responders: ... Emergency Wound Care Wound Management for Healthcare Pros Power Outages When the Power Goes Out Worker Safety ...

  15. Winter Weather: Indoor Safety

    Science.gov (United States)

    ... or Traumatic Event Resources for Families Resources for Leaders Resources for State and Local Governments Emergency Responders: ... Emergency Wound Care Wound Management for Healthcare Pros Power Outages When the Power Goes Out Worker Safety ...

  16. Practice Hospital Bed Safety

    Science.gov (United States)

    ... Updates Practice Hospital Bed Safety Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Hospital Bed Entrapment Zones An ... the side edge of the head or foot board 7. between the head or foot board and ...

  17. Aerospace Safety Advisory Panel

    Science.gov (United States)

    1984-01-01

    An assessment of NASA's safety performance for 1983 affirms that NASA Headquarters and Center management teams continue to hold the safety of manned flight to be their prime concern, and that essential effort and resources are allocated for maintaining safety in all of the development and operational programs. Those conclusions most worthy of NASA management concentration are given along with recommendations for action concerning; product quality and utility; space shuttle main engine; landing gear; logistics and management; orbiter structural loads, landing speed, and pitch control; the shuttle processing contractor; and the safety of flight operations. It appears that much needs to be done before the Space Transportation System can achieve the reliability necessary for safe, high rate, low cost operations.

  18. Swimming Pool Safety

    Science.gov (United States)

    ... Prevention Listen Español Text Size Email Print Share Swimming Pool Safety Page Content ​What is the best way to keep my child safe around swimming pools? An adult should actively watch children at ...

  19. Safety in paediatric imaging

    Energy Technology Data Exchange (ETDEWEB)

    Carter, D.; Filice, I.; Murray, D.; Thomas, K. [The Hospital for Sick Children, Toronto, Ontario (Canada)

    2006-01-01

    Those of us working in a dedicated paediatric environment are aware of the important safety issues with regard to paediatrics. Our goal when working with paediatric patients, the goal is to obtain the best quality images while keeping patients safe and their distress to a minimum. This article will discuss some of the issues regarding paediatric safety in a diagnostic imaging department, including radiation doses and the risk to paediatric patients, reducing medication errors, safe sedation practice and environmental safety. Also discussed are some conditions requiring special consideration to maintain patient safety such as epiglottitis and suspected child abuse. Promotion of a patient/family-centered care system will create an environment of trust where parents or guardians will know that their children are being well cared for in a safe, effective environment. (author)

  20. First Aid and Safety

    Science.gov (United States)

    ... Them Safely Preventing Dog Bites Selecting Safe Pets Sexting: What Parents Need to Know Taking Care of ... Vaccines Before Traveling? How to Choose & Use Sunscreen Sexting: What Parents Need to Know Printable Safety Guides ...

  1. Nanosensors for food safety.

    Science.gov (United States)

    Li, Zhixiong; Sheng, Chenxing

    2014-01-01

    This review summarizes recent research and development of nanosensors applied to the food safety. Since the food safety is directly related to the people's health and life, the food detection has received considerable attentions. However, this food security has emerged in China as a severe problem in recent years. Food safety problems frequently compromised due to formaldehyde, poison vegetables, excessive pesticide residues, etc. These kinds of food contaminations could not be detected efficiently by traditional methods. Applying nanotechnology and nanominerals, various food contaminations can be identified accurately. Therefore nanosensors have been widely used in the food detection. We introduce current research on nanosensors followed by the industrial application of nanosensors. Finally, the challenges for the future food safety using nanosensors are discussed.

  2. APPLIED FARM FOOD SAFETY

    OpenAIRE

    Ender, Judit; Mikaczo, Andrea

    2008-01-01

    Recently there have been more and more foodborne illnesses being associated with fresh vegetable produce. In response to this, consumer confidence has been lowered with the safety of the vegetable industry. So, many retailers have recently announced programs requiring growers to have independent third-party inspections. The goal with this essay is to introduce a vegetable farm and reveal its food safety procedures from the seeding through shipping,. reviewing, evaluating, and strengthening cu...

  3. Criticality safety training

    Energy Technology Data Exchange (ETDEWEB)

    Woodruff, S.K. [Los Alamos National Lab., NM (United States)

    1997-06-01

    Criticality safety training is an important element of the Plutonium Facility safety program at Los Alamos National Laboratory. Training consists of student self-study handbooks and hands-on performance-based training in a mock-up laboratory containing gloveboxes, trolley conveyor system, and self-monitoring instruments. A 10-minute video tape and lecture was presented to describe how training in this area is conducted.

  4. Safety Campaign Continues

    CERN Multimedia

    2002-01-01

    If you see this poster, stop and read it! This is the third poster produced by TIS Division as part of its information campaign on health and safety in the workplace. It provides statistics on occupational accidents at CERN. You will see that, as in the rest of Europe, falls, slips and trips continue to be the main cause of accident. So, eyes open and take care! For more information : http://safety.cern.ch/

  5. Magnetic Resonance Safety

    OpenAIRE

    Sammet, Steffen

    2016-01-01

    Magnetic Resonance Imaging (MRI) has a superior soft-tissue contrast compared to other radiological imaging modalities and its physiological and functional applications have led to a significant increase in MRI scans worldwide. A comprehensive MRI safety training to protect patients and other healthcare workers from potential bio-effects and risks of the magnetic fields in an MRI suite is therefore essential. The knowledge of the purpose of safety zones in an MRI suite as well as MRI appropri...

  6. Safety instruction No. 36

    CERN Multimedia

    SC Secretariat

    2005-01-01

    Please note that a revised version of Safety Instruction No. 36 (IS 36), entitled "Safety rules for the use of static magnetic fields at CERN" is available on the Web at the following url: https://edms.cern.ch/document/335801/LAST_RELEASED Paper copies can also be obtained from the SC unit secretariat (e-mail : sc.secretariat@cern.ch) SC Secretariat

  7. Software system safety

    Science.gov (United States)

    Uber, James G.

    1988-01-01

    Software itself is not hazardous, but since software and hardware share common interfaces there is an opportunity for software to create hazards. Further, these software systems are complex, and proven methods for the design, analysis, and measurement of software safety are not yet available. Some past software failures, future NASA software trends, software engineering methods, and tools and techniques for various software safety analyses are reviewed. Recommendations to NASA are made based on this review.

  8. Safety system status monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, J.R.; Morgenstern, M.H.; Rideout, T.H.; Cowley, P.J.

    1984-03-01

    The Pacific Northwest Laboratory has studied the safety aspects of monitoring the preoperational status of safety systems in nuclear power plants. The goals of the study were to assess for the NRC the effectiveness of current monitoring systems and procedures, to develop near-term guidelines for reducing human errors associated with monitoring safety system status, and to recommend a regulatory position on this issue. A review of safety system status monitoring practices indicated that current systems and procedures do not adequately aid control room operators in monitoring safety system status. This is true even of some systems and procedures installed to meet existing regulatory guidelines (Regulatory Guide 1.47). In consequence, this report suggests acceptance criteria for meeting the functional requirements of an adequate system for monitoring safety system status. Also suggested are near-term guidelines that could reduce the likelihood of human errors in specific, high-priority status monitoring tasks. It is recommended that (1) Regulatory Guide 1.47 be revised to address these acceptance criteria, and (2) the revised Regulatory Guide 1.47 be applied to all plants, including those built since the issuance of the original Regulatory Guide.

  9. Fuel safety research 1999

    Energy Technology Data Exchange (ETDEWEB)

    Uetsuka, Hiroshi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-07-01

    In April 1999, the Fuel Safety Research Laboratory was newly established as a result of reorganization of the Nuclear Safety Research Center, JAERI. The laboratory was organized by combining three laboratories, the Reactivity Accident Laboratory, the Fuel Reliability Laboratory, and a part of the Sever Accident Research Laboratory. Consequently, the Fuel Safety Research Laboratory is now in charge of all the fuel safety research in JAERI. Various types of experimental and analytical researches are conducted in the laboratory by using the unique facilities such as the Nuclear Safety Research Reactor (NSRR), the Japan Material Testing Reactor (JMTR), the Japan Research Reactor 3 (JRR-3) and hot cells in JAERI. The laboratory consists of five research groups corresponding to each research fields. They are; (a) Research group of fuel behavior under the reactivity initiated accident conditions (RIA group). (b) Research group of fuel behavior under the loss-of-coolant accident conditions (LOCA group). (c) Research group of fuel behavior under the normal operation conditions (JMTR/BOCA group). (d) Research group of fuel behavior analysis (FEMAXI group). (e) Research group of FP release/transport behavior from irradiated fuel (VEGA group). This report summarizes the outline of research activities and major outcomes of the research executed in 1999 in the Fuel Safety Research Laboratory. (author)

  10. Safety Basis Report

    Energy Technology Data Exchange (ETDEWEB)

    R.J. Garrett

    2002-01-14

    As part of the internal Integrated Safety Management Assessment verification process, it was determined that there was a lack of documentation that summarizes the safety basis of the current Yucca Mountain Project (YMP) site characterization activities. It was noted that a safety basis would make it possible to establish a technically justifiable graded approach to the implementation of the requirements identified in the Standards/Requirements Identification Document. The Standards/Requirements Identification Documents commit a facility to compliance with specific requirements and, together with the hazard baseline documentation, provide a technical basis for ensuring that the public and workers are protected. This Safety Basis Report has been developed to establish and document the safety basis of the current site characterization activities, establish and document the hazard baseline, and provide the technical basis for identifying structures, systems, and components (SSCs) that perform functions necessary to protect the public, the worker, and the environment from hazards unique to the YMP site characterization activities. This technical basis for identifying SSCs serves as a grading process for the implementation of programs such as Conduct of Operations (DOE Order 5480.19) and the Suspect/Counterfeit Items Program. In addition, this report provides a consolidated summary of the hazards analyses processes developed to support the design, construction, and operation of the YMP site characterization facilities and, therefore, provides a tool for evaluating the safety impacts of changes to the design and operation of the YMP site characterization activities.

  11. Cryogenic safety organisation at CERN

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    With Safety being a top priority of CERN’s general policy, the Organisation defines and implements a Policy that sets out the general principles governing Safety at CERN. To the end of the attainment of said Safety objectives, the organic units (owners/users of the equipment) are assigned the responsibility for the implementation of the CERN Safety Policy at all levels of the organization, whereas the Health and Safety and Environmental Protection Unit (HSE) has the role of providing assistance for the implementation of the Safety Policy, and a monitoring role related to the implementation of continuous improvement of Safety, compliance with the Safety Rules and the handling of emergency situations. This talk will elaborate on the roles, responsibilities and organisational structure of the different stakeholders within the Organization with regards to Safety, and in particular to cryogenic safety. The roles of actors of particular importance such as the Cryogenic Safety Officers (CSOs) and the Cryogenic Sa...

  12. Leadership for safety: industrial experience.

    Science.gov (United States)

    Flin, R; Yule, S

    2004-12-01

    The importance of leadership for effective safety management has been the focus of research attention in industry for a number of years, especially in energy and manufacturing sectors. In contrast, very little research into leadership and safety has been carried out in medical settings. A selective review of the industrial safety literature for leadership research with possible application in health care was undertaken. Emerging findings show the importance of participative, transformational styles for safety performance at all levels of management. Transactional styles with attention to monitoring and reinforcement of workers' safety behaviours have been shown to be effective at the supervisory level. Middle managers need to be involved in safety and foster open communication, while ensuring compliance with safety systems. They should allow supervisors a degree of autonomy for safety initiatives. Senior managers have a prime influence on the organisation's safety culture. They need to continuously demonstrate a visible commitment to safety, best indicated by the time they devote to safety matters.

  13. Safety Learning, Organizational Contradictions and the Dynamics of Safety Practice

    Science.gov (United States)

    Ripamonti, Silvio Carlo; Scaratti, Giuseppe

    2015-01-01

    Purpose: The purpose of this paper is to explore the enactment of safety routines in a transshipment port. Research on work safety and reliability has largely neglected the role of the workers' knowledge in practice in the enactment of organisational safety. The workers' lack of compliance with safety regulations represents an enduring problem…

  14. Labor unions and safety climate: perceived union safety values and retail employee safety outcomes.

    Science.gov (United States)

    Sinclair, Robert R; Martin, James E; Sears, Lindsay E

    2010-09-01

    Although trade unions have long been recognized as a critical advocate for employee safety and health, safety climate research has not paid much attention to the role unions play in workplace safety. We proposed a multiple constituency model of workplace safety which focused on three central safety stakeholders: top management, ones' immediate supervisor, and the labor union. Safety climate research focuses on management and supervisors as key stakeholders, but has not considered whether employee perceptions about the priority their union places on safety contributes contribute to safety outcomes. We addressed this gap in the literature by investigating unionized retail employee (N=535) perceptions about the extent to which their top management, immediate supervisors, and union valued safety. Confirmatory factor analyses demonstrated that perceived union safety values could be distinguished from measures of safety training, workplace hazards, top management safety values, and supervisor values. Structural equation analyses indicated that union safety values influenced safety outcomes through its association with higher safety motivation, showing a similar effect as that of supervisor safety values. These findings highlight the need for further attention to union-focused measures related to workplace safety as well as further study of retail employees in general. We discuss the practical implications of our findings and identify several directions for future safety research. 2009 Elsevier Ltd. All rights reserved.

  15. Software Safety Risk in Legacy Safety-Critical Computer Systems

    Science.gov (United States)

    Hill, Janice L.; Baggs, Rhoda

    2007-01-01

    Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

  16. Preoperative Safety Briefing Project.

    Science.gov (United States)

    Defontes, James; Surbida, Stephanie

    2004-01-01

    Increased media attention on surgical procedures that were performed on the wrong anatomic site or wrong patient has prompted the health care industry to identify and address human factors that lead to medical errors. To increase patient safety in the perioperative setting, our objective was to create a climate of improved communication, collaboration, team-work, and situational awareness while the surgical team reviewed pertinent information about the patient and the pending procedure. A team of doctors, nurses, and technicians used human factors principles to develop the Preoperative Safety Briefing for use by surgical teams, a briefing similar to the preflight checklist used by the airline industry. A six-month pilot of the briefing began in the Kaiser Permanente (KP) Anaheim Medical Center in February 2002. Four indicators of safety culture were used to measure success of the pilot: occurrence of wrong-site/wrong procedures, attitudinal survey data, near-miss reports, and nursing personnel turnover data. Wrong-site surgeries decreased from 3 to 0 (300%) per year; employee satisfaction increased 19%; nursing personnel turnover decreased 16%; and perception of the safety climate in the operating room improved from "good" to "outstanding." Operating suite personnel perception of teamwork quality improved substantially. Operating suite personnel perception of patient safety as a priority, of personnel communication, of their taking responsibility for patient safety, of nurse input being well received, of overall morale, and of medical errors being handled appropriately also improved substantially. Team members who work together and communicate well can quickly detect and more easily avoid errors. The Preoperative Safety Briefing is now standard in many operating suites in the KP Orange County Service Area. The concepts and design of this project are transferable, and similar projects are underway in the Departments of Radiology and of Labor and Delivery at KP

  17. NSTA Portal to Science Safety

    Science.gov (United States)

    Roy, Ken

    2010-01-01

    The National Science Teachers Association's (NSTA) Science Safety Advisory Board recently launched the Safety in the Science Classroom portal. This portal serves as a gateway to safety resources for teachers, supervisors, and administrators. It also contains an evolving list of safety resources for elementary, middle, and high schools. The list…

  18. Safety brings CERNois together

    CERN Multimedia

    CERN Bulletin

    2012-01-01

    The World Day for Health and Safety at Work, which was celebrated at CERN on 27 April, provided an opportunity for the safety professionals and members of the CERN personnel to get together to discuss joint concerns. It was a good opportunity for people to learn to distinguish between good and bad habits.   Members of the CERN Fire Brigade advise the Director-General. Two weeks ago, for the second year running, CERN’s restaurants hosted World Day for Health and Safety at Work stands. And once again, the stands attracted considerable interest. “Many people consulted our experts on safety issues relating in particular to ergonomics and electrical risks, the two themes to which we devoted particular attention this time,” explained Charles-Edouard Sala, a member of the BE Department’s Safety Unit and co-organiser of the event. The cardiac massage competition organised by members of CERN's Fire Brigade attracted a large number of competitors. No fe...

  19. Nonclinical Safety and Toxicology.

    Science.gov (United States)

    Stark, Claudia; Steger-Hartmann, Thomas

    2016-01-01

    Nonclinical safety pharmacology and toxicology testing of drug candidates assess the potential adverse effects caused by the drug in relation to its intended use in humans. Hazards related to a drug have to be identified and the potential risks at the intended exposure have to be evaluated in comparison to the potential benefit of the drug. Preclinical safety is thus an integral part of drug discovery and drug development. It still causes significant attrition during drug development.Therefore, there is a need for smart selection of drug candidates in drug discovery including screening of important safety endpoints. In the recent years,there was significant progress in computational and in vitro technology allowing in silico assessment as well as high-throughput screening of some endpoints at very early stages of discovery. Despite all this progress, in vivo evaluation of drug candidates is still an important part to safety testing. The chapter provides an overview on the most important areas of nonclinical safety screening during drug discovery of small molecules.

  20. MOTOR VEHICLE SAFETY RESEARCH METHODOLOGY

    Directory of Open Access Journals (Sweden)

    A. Stepanov

    2015-07-01

    Full Text Available The issues of vehicle safety are considered. The methodology of approach to analyzing and solving the problem of safety management of vehicles and overall traffic is offered. The distinctive features of organization and management of vehicle safety are shown. There has been drawn a conclusion that the methodological approach to solving traffic safety problems is reduced to selection and classification of safety needs.

  1. Integrated Safety in Design

    DEFF Research Database (Denmark)

    Schultz, Casper Siebken; Jørgensen, Kirsten

    2014-01-01

    consider OHS in execution as a responsibility of the contractors. The output of this stage is a systematic and structured conceptual framework that couples OHS-risks in construction (health, safety and mental health) to the stages in the design and engineering processes. Moreover the framework includes...... a focus on processual elements, constraints and prevention strategies and also includes a tool to address OHS risks in the design processes. The approach stresses how complying with legislation should only be seen as a minimum condition in design and engineering. Incentives to prioritize OHS in design......An on-going research project investigates the inclusion of health and safety considerations in the design phase as a means to achieve a higher level of health and safety in the construction industry. Moreover, the approach is coupled to the overall quality efforts. Two architectural firms and two...

  2. Process and plant safety

    CERN Document Server

    Hauptmanns, Ulrich

    2015-01-01

    Accidents in technical installations are random events. Hence they cannot be totally avoided. Only the probability of their occurrence may be reduced and their consequences be mitigated. The book proceeds from hazards caused by materials and process conditions to indicating technical and organizational measures for achieving the objectives of reduction and mitigation. Qualitative methods for identifying weaknesses of design and increasing safety as well as models for assessing accident consequences are presented. The quantitative assessment of the effectiveness of safety measures is explained. The treatment of uncertainties plays a role there. They stem from the random character of the accident and from lacks of knowledge on some of the phenomena to be addressed. The reader is acquainted with the simulation of accidents, safety and risk analyses and learns how to judge the potential and limitations of mathematical modelling. Risk analysis is applied amongst others to “functional safety” and the determinat...

  3. Recalls, Market Withdrawals and Safety Alerts

    Science.gov (United States)

    ... Home Safety Recalls, Market Withdrawals, & Safety Alerts Recalls, Market Withdrawals, & Safety Alerts Share Tweet Linkedin Pin it ... Safety Alerts Archive. Sign up to receive Recalls, Market Withdrawals and Safety Alerts . * FDA Employees: Use Chrome ...

  4. Nuclear Reactor Safety; (USA)

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Hicks, S.C. (eds.)

    1991-01-01

    This publication announces on an monthly basis the current worldwide information available on all safety-related aspects of reactors, including: accident analysis, safety systems, radiation protection, decommissioning and dismantling, and security measures. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are other US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Technology Data Exchange, the International Atomic Energy Agency's International Nuclear Information System, or government-to-government agreements.

  5. VACCINATION SAFETY: MODERN DATA

    Directory of Open Access Journals (Sweden)

    V.К. Tatochenko

    2007-01-01

    Full Text Available Vaccination aided disease control over infection pathology among the children led to elimination of smallpox and poliomyelitis, drastic decrease of the tuberculous meningitis recurrences, tetanus, measles and other infection diseases and their complications. At the same time, Russia is still afraid to apply certain vaccines. The reasons for that are mainly subjective. This is the unjustified caution related to the fear that it may cause severe vaccine associated complications. The data in view of the lecture indicates the safety of the vaccinal prevention procedures and measures for the prevention of their complications.Key words: vaccinal prevention, vaccination complications, vaccination safety, children.

  6. The safety leadership.

    Science.gov (United States)

    Lees, Howard; Faulkner, Bruce

    2010-01-01

    In this paper the authors present a careful consideration about the role of leadership, the fundamental element for the success of Behavior-Based Safety (B-BS) programs within companies. Lees and Faulkner have been training, coaching and writing about Behavior-Based Safety for the last ten years. Considerable data has been gathered during this process and the paramount factor in its success is leadership. An effective leader can create many spectacular successes. The success stories are all predicated on good leadership, without that a good product, great processes and quality people are all wasted and often find themselves on the rocks of frustration.

  7. Seismic Safety Guide

    Energy Technology Data Exchange (ETDEWEB)

    Eagling, D.G. (ed.)

    1983-09-01

    This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

  8. CERN safety week

    CERN Multimedia

    DG Unit

    2009-01-01

    Following an increase in the number of accidents in 2008, the Safety Commission is organising a CERN safety week from 8 to 12 June for riders of bicycles, scooters and motorbikes. We invite you to take part in the programme, which will be held in the Main Building (Bldg. 500) and will consist of an exhibition, organised events and hands-on activities, including demonstrations of emergency braking, a driving simulator, simulation of what it feels like to drive under the influence of alcohol, demonstrations by the Fire Brigade, video projections, etc. There will also be a number of prizes to be won. Please sign up via your DSO.

  9. Software Safety and Security

    CERN Document Server

    Nipkow, T; Hauptmann, B

    2012-01-01

    Recent decades have seen major advances in methods and tools for checking the safety and security of software systems. Automatic tools can now detect security flaws not only in programs of the order of a million lines of code, but also in high-level protocol descriptions. There has also been something of a breakthrough in the area of operating system verification. This book presents the lectures from the NATO Advanced Study Institute on Tools for Analysis and Verification of Software Safety and Security; a summer school held at Bayrischzell, Germany, in 2011. This Advanced Study Institute was

  10. Safety detaching hook specification.

    CSIR Research Space (South Africa)

    Roux, JD

    1999-05-01

    Full Text Available not open or detach when tilted horizontally in a slack rope event or when struck by a falling object (as described in paragraph 2.4 (d) (ii)). f) Design Drawings and Calculations Detailed design drawings and calculations shall be compiled for all safety... in a data book (defined in paragraph 2.5 (f)). a) Material Testing Safety detaching hook materials shall conform to the requirements of BS 27723 Part 2 (unless otherwise specified) and test pieces shall also be prepared and tested in accordance...

  11. IMPROVING PATIENT SAFETY:

    DEFF Research Database (Denmark)

    Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

    Improving patient safety is both a national and international priority as millions of patients Worldwide suffer injury or death every year due to unsafe care. University College Zealand employs innovative pedagogical approaches in educational design. Regional challenges related to geographic......, social and cultural factors have resulted in a greater emphasis upon digital technology. Attempts to improve patient safety by optimizing students’ competencies in relation to the reporting of clinical errors, has resulted in the development of an interdisciplinary e-learning concept. The program makes...

  12. The association between EMS workplace safety culture and safety outcomes.

    Science.gov (United States)

    Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

    2012-01-01

    Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

  13. Deep Borehole Disposal Safety Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Freeze, Geoffrey A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Stein, Emily [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Price, Laura L. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); MacKinnon, Robert J. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Tillman, Jack Bruce [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2016-10-01

    This report presents a preliminary safety analysis for the deep borehole disposal (DBD) concept, using a safety case framework. A safety case is an integrated collection of qualitative and quantitative arguments, evidence, and analyses that substantiate the safety, and the level of confidence in the safety, of a geologic repository. This safety case framework for DBD follows the outline of the elements of a safety case, and identifies the types of information that will be required to satisfy these elements. At this very preliminary phase of development, the DBD safety case focuses on the generic feasibility of the DBD concept. It is based on potential system designs, waste forms, engineering, and geologic conditions; however, no specific site or regulatory framework exists. It will progress to a site-specific safety case as the DBD concept advances into a site-specific phase, progressing through consent-based site selection and site investigation and characterization.

  14. Hospital safety climate and safety behavior: A social exchange perspective.

    Science.gov (United States)

    Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

    Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

  15. Safety of intranasal corticosteroids.

    Science.gov (United States)

    Bensch, Greg W

    2016-12-01

    Concurrent use of intranasal corticosteroids (INCSs) and inhaled corticosteroids (ICSs) is indicated for patients who are comorbid for asthma and allergic rhinitis. Clinicians need to know the data regarding INCS safety for their patients with asthma. To discuss INCS safety data for the use of INCSs in patients with asthma and allergic rhinitis. INCS safety studies were selected for their relevance to the discussion. To date, most studies regarding INCS safety are performed in patients with allergic rhinitis. These studies reveal no evidence of increased risk of nasal atrophy, and only isolated cases of septal perforation have been reported. Evidence of hypothalamic-pituitary-adrenal axis suppression is inconsistent and not clinically significant. Early growth studies indicated that beclomethasone dipropionate but not other INCSs have systemic effects on growth; however, newer, larger, and better designed studies are detecting small but significant growth effects in other INCSs. INCSs do not increase the risk of cataracts or glaucoma, although there are anecdotal data on transient elevated intraocular pressure. Data on concurrent use of INCSs and ICSs are limited, but these limited data reveal no evidence of systemic effects on the hypothalamic-pituitary-adrenal axis. More studies of concurrent therapy are needed because concurrent use of ICSs and INCSs is common in practice. Clinicians might want to consider monitoring whether there are risk factors, such as a family history of glaucoma. Copyright © 2016 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  16. Safety and Science Teaching.

    Science.gov (United States)

    Virginia State Dept. of Education, Richmond. Div. of Sciences and Elementary Administration.

    This 10-chapter handbook (designed for science teachers and school administrators) describes known hazards associated with science teaching and provides information to develop a framework for local safety programs specifically designed to avoid or neutralize the effects of such hazards. Major areas addressed in the chapters include: (1) the nature…

  17. Fire Safety Training Handbook.

    Science.gov (United States)

    Montgomery County Dept. of Fire and Rescue Services, Rockville, MD. Div. of Fire Prevention.

    Designed for a community fire education effort, particularly in which local volunteers present general information on fire safety to their fellow citizens, this workbook contains nine lessons. Included are an overview of the household fire problem; instruction in basic chemistry and physics of fire, flammable liquids, portable fire extinguishers,…

  18. Safety Picks up "STEAM"

    Science.gov (United States)

    Roy, Ken

    2016-01-01

    This column shares safety information for the classroom. STEAM subjects--science, technology, engineering, art, and mathematics--are essential for fostering students' 21st-century skills. STEAM promotes critical-thinking skills, including analysis, assessment, categorization, classification, interpretation, justification, and prediction, and are…

  19. Safety nets or straitjackets?

    DEFF Research Database (Denmark)

    Ilsøe, Anna

    2012-01-01

    Does regulation of working hours at national and sector level impose straitjackets, or offer safety nets to employees seeking working time flexibility? This article compares legislation and collective agreements in the metal industries of Denmark, Germany and the USA. The industry has historically...

  20. Airline Safety and Economy

    Science.gov (United States)

    1993-01-01

    This video documents efforts at NASA Langley Research Center to improve safety and economy in aircraft. Featured are the cockpit weather information needs computer system, which relays real time weather information to the pilot, and efforts to improve techniques to detect structural flaws and corrosion, such as the thermal bond inspection system.

  1. STATIN SAFETY REVISITED DATA

    Directory of Open Access Journals (Sweden)

    O. M. Drapkina

    2013-01-01

    Full Text Available Questions of statins use in liver diseases are discussed. Data from clinical studies on statins safety in cardiac patients with liver diseases are presented. Features of statins use in nonalcoholic fatty liver disease, viral hepatitis C are considered separately.

  2. Safety Instruction No 43

    CERN Document Server

    2004-01-01

    Please note that the Safety Instruction No 43 (IS 43) entitled "ASBESTOS - DANGERS AND PRECAUTIONS" is available on the web at the following URL: https://edms.cern.ch/document/335809/LAST_RELEASED/ Paper copies can also be obtained from the SC secretariat, e-mail: tis.secretariat@cern.ch. SC Secretariat

  3. FEATURES ROAD SAFETY AUDIT

    Directory of Open Access Journals (Sweden)

    L. Abramova

    2015-07-01

    Full Text Available Development of the road network, increasing motorization of the population significantly increase the risk of accidents. Experts in the field of traffic are developing methods to reduce the probability of accidents. The ways of solving the problems of road safety audit at various stages of the «life» of roads are considered.

  4. Laboratory safety handbook

    Science.gov (United States)

    Skinner, E.L.; Watterson, C.A.; Chemerys, J.C.

    1983-01-01

    Safety, defined as 'freedom from danger, risk, or injury,' is difficult to achieve in a laboratory environment. Inherent dangers, associated with water analysis and research laboratories where hazardous samples, materials, and equipment are used, must be minimized to protect workers, buildings, and equipment. Managers, supervisors, analysts, and laboratory support personnel each have specific responsibilities to reduce hazards by maintaining a safe work environment. General rules of conduct and safety practices that involve personal protection, laboratory practices, chemical handling, compressed gases handling, use of equipment, and overall security must be practiced by everyone at all levels. Routine and extensive inspections of all laboratories must be made regularly by qualified people. Personnel should be trained thoroughly and repetitively. Special hazards that may involve exposure to carcinogens, cryogenics, or radiation must be given special attention, and specific rules and operational procedures must be established to deal with them. Safety data, reference materials, and texts must be kept available if prudent safety is to be practiced and accidents prevented or minimized.

  5. Safety Awareness & Communications Internship

    Science.gov (United States)

    Jefferson, Zanani

    2015-01-01

    The projects that I have worked on during my internships were updating the JSC Safety & Health Action Team JSAT Employee Guidebook, conducting a JSC mishap case study, preparing for JSC Today Close Call success stories, and assisting with event planning and awareness.

  6. Serious about safety

    CSIR Research Space (South Africa)

    Landman, K

    1999-04-01

    Full Text Available in the creation of safer environments, by being aware of and employing the principles of crime prevention through environmental design. These principles and the entire approach, can be incorporated in Community Safety Plans, as part of the broader community...

  7. Bumpers: Traffic Safety Tips

    Science.gov (United States)

    1996-01-01

    This fact sheet, NHTSA Facts: Summer 1996, discusses automobile bumpers. It notes that a car bumper is not a safety device to prevent or reduce injuries to people in the car. Instead, it is designed to protect the hood, trunk, grille, parking lights,...

  8. Workplace Safety and Women

    Centers for Disease Control (CDC) Podcasts

    2009-05-11

    This women's health podcast focuses on four important issues for women at work: job stress, work schedules, reproductive health, and workplace violence.  Created: 5/11/2009 by Office of Women's Health (OWH) and National Institute for Occupational Safety and Health (NIOSH).   Date Released: 5/11/2009.

  9. Motor Vehicle Safety

    Science.gov (United States)

    ... you can do to be safer on the road: Make sure your vehicle is safe and in working order Use car seats for children Wear your seat belt Don't speed or drive aggressively Don't drive impaired Safety also involves being aware of others. Share the ...

  10. Alcohol and Traffic Safety.

    Science.gov (United States)

    Dickman, Frances Baker, Ed.

    1988-01-01

    Seven papers discuss current issues and applied social research concerning alcohol traffic safety. Prevention, policy input, methodology, planning strategies, anti-drinking/driving programs, social-programmatic orientations of Mothers Against Drunk Driving, Kansas Driving Under the Influence Law, New Jersey Driving While Impaired Programs,…

  11. Chemical Safety – Introduction

    CERN Multimedia

    DG Unit

    2009-01-01

    A course of "Chemical Safety – Introduction" will be held in English on 29 May 2009, 9:30-12:00. There are some places left. If you are interested in participating, please register on the Training Catalogue. You will then receive an invitation by email.

  12. Safety concerns us all

    CERN Multimedia

    SC/GS/S

    2004-01-01

    In spite of periodic safety inspections, risks can never be entirely excluded. The Safety Commission invites you to inform your supervisor or Territorial Safety Officer (TSO) of any hazardous situations you may be aware of. Actions to be taken following the fall of two windowpanes A few weeks ago, a windowpane fell from the third floor of an office building, causing minor damage to a car parked outside. No one was hurt in the incident. The putty holding the window in place had gradually deteriorated over time, and strong winds undoubtedly triggered the incident. A few weeks later, a sudden draft caused a window on the fifth floor of the same building to shatter and fall to the ground below. No one was hurt and there was no material damage. The incident was caused by a fan set into the opening window: as the window slammed shut, the weight of the fan caused the glass to break. What can we do to improve safety? examine the windows of our offices and workshops and report any problems or faults, such as dam...

  13. Road lighting for safety.

    NARCIS (Netherlands)

    Schreuder, D.A.

    2000-01-01

    This book is aimed at broad readership, not especially at lighting experts. Lighting is presented as a system, as part of the public highway. Much attention is paid to subjects not greatly covered in the specialist literature, such as environmental aspects, traffic safety, crime prevention, and the

  14. Safety Assessment of Probiotics

    Science.gov (United States)

    Lahtinen, Sampo J.; Boyle, Robert J.; Margolles, Abelardo; Frias, Rafael; Gueimonde, Miguel

    Viable microbes have been a natural part of human diet throughout the history of mankind. Today, different fermented foods and other foods containing live microbes are consumed around the world, including industrialized countries, where the diet has become increasingly sterile during the last decades. By definition, probiotics are viable microbes with documented beneficial effects on host health. Probiotics have an excellent safety record, both in humans and in animals. Despite the wide and continuously increasing consumption of probiotics, adverse events related to probiotic use are extremely rare. Many popular probiotic strains such as lactobacilli and bifidobacteria can be considered as components of normal healthy intestinal microbiota, and thus are not thought to pose a risk for the host health - in contrast, beneficial effects on health are commonly reported. Nevertheless, the safety of probiotics is an important issue, in particular in the case of new potential probiotics which do not have a long history of safe use, and of probiotics belonging to species for which general assumption of safety cannot be made. Furthermore, safety of probiotics in high-risk populations such as critically ill patients and immunocompromized subjects deserves particular attention, as virtually all reported cases of bacteremia and fungemia associated with probiotic use, involve subjects with underlying diseases, compromised immune system or compromised intestinal integrity.

  15. Current anticoagulant safety.

    Science.gov (United States)

    Denas, Gentian; Pengo, Vittorio

    2012-05-01

    Currently used anticoagulants such as unfractionated heparin, low-molecular-weight heparin and vitamin K antagonists, have several drawbacks, mostly related to safety. In this review, we will briefly discuss and compare the safety of anticoagulation therapy with 'old' and new agents. Safety issues with anticoagulation therapy are mostly related to bleeding. The intensity of anticoagulation is related to the risk of bleeding and thus, for the efficacy not to be affected, must be maintained at the lower effective intensity. Several improvements have been made in the management of anticoagulation therapy; these include monitoring, pathology-based treatment schemes taking into account patient characteristics, patient education and the introduction of anticoagulation centers. Safety of novel anticoagulants is encouraging. Novel agents have the potential to compete with existing therapy for thromboprophylaxis, treatment and stroke prevention in atrial fibrillation. Promising results have emerged from trials comparing them with existing treatment. Not long from now we will see these new agents in the armamentarium of antithrombotic drugs.

  16. Fuel safety research 2001

    Energy Technology Data Exchange (ETDEWEB)

    Uetsuka, Hiroshi (ed.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2002-11-01

    The Fuel Safety Research Laboratory is in charge of research activity which covers almost research items related to fuel safety of water reactor in JAERI. Various types of experimental and analytical researches are being conducted by using some unique facilities such as the Nuclear Safety Research Reactor (NSRR), the Japan Material Testing Reactor (JMTR), the Japan Research Reactor 3 (JRR-3) and the Reactor Fuel Examination Facility (RFEF) of JAERI. The research to confirm the safety of high burn-up fuel and MOX fuel under accident conditions is the most important item among them. The laboratory consists of following five research groups corresponding to each research fields; Research group of fuel behavior under the reactivity initiated accident conditions (RIA group). Research group of fuel behavior under the loss-of-coolant accident conditions (LOCA group). Research group of fuel behavior under the normal operation conditions (JMTR/BOCA group). Research group of fuel behavior analysis (FEMAXI group). Research group of radionuclides release and transport behavior from irradiated fuel under severe accident conditions (VEGA group). The research conducted in the year 2001 produced many important data and information. They are, for example, the fuel behavior data under BWR power oscillation conditions in the NSRR, the data on failure-bearing capability of hydrided cladding under LOCA conditions and the FP release data at very high temperature in steam which simulate the reactor core condition during severe accidents. This report summarizes the outline of research activities and major outcomes of the research executed in 2001 in the Fuel Safety Research Laboratory. (author)

  17. Using a safety forecast model to calculate future safety metrics.

    Science.gov (United States)

    2017-05-01

    This research sought to identify a process to improve long-range planning prioritization by using forecasted : safety metrics in place of the existing Utah Department of Transportation Safety Indexa metric based on historical : crash data. The res...

  18. Safety climate and attitude as evaluation measures of organizational safety.

    Science.gov (United States)

    Isla Díaz, R; Díaz Cabrera, D

    1997-09-01

    The main aim of this research is to develop a set of evaluation measures for safety attitudes and safety climate. Specifically it is intended: (a) to test the instruments; (b) to identify the essential dimensions of the safety climate in the airport ground handling companies; (c) to assess the quality of the differences in the safety climate for each company and its relation to the accident rate; (d) to analyse the relationship between attitudes and safety climate; and (e) to evaluate the influences of situational and personal factors on both safety climate and attitude. The study sample consisted of 166 subjects from three airport companies. Specifically, this research was centered on ground handling departments. The factor analysis of the safety climate instrument resulted in six factors which explained 69.8% of the total variance. We found significant differences in safety attitudes and climate in relation to type of enterprise.

  19. The road safety audit and road safety inspection.

    NARCIS (Netherlands)

    2007-01-01

    A road safety audit (RSA) and a road safety inspection (RSI) are used to test the safety level of the road infrastructure. The RSA tests the design of new roads or the reconstruction of existing roads, whereas the RSI is used for testing existing roads. An RSA, therefore, aims to 'improve' the road

  20. [Agricultural biotechnology safety assessment].

    Science.gov (United States)

    McClain, Scott; Jones, Wendelyn; He, Xiaoyun; Ladics, Gregory; Bartholomaeus, Andrew; Raybould, Alan; Lutter, Petra; Xu, Haibin; Wang, Xue

    2015-01-01

    Genetically modified (GM) crops were first introduced to farmers in 1995 with the intent to provide better crop yield and meet the increasing demand for food and feed. GM crops have evolved to include a thorough safety evaluation for their use in human food and animal feed. Safety considerations begin at the level of DNA whereby the inserted GM DNA is evaluated for its content, position and stability once placed into the crop genome. The safety of the proteins coded by the inserted DNA and potential effects on the crop are considered, and the purpose is to ensure that the transgenic novel proteins are safe from a toxicity, allergy, and environmental perspective. In addition, the grain that provides the processed food or animal feed is also tested to evaluate its nutritional content and identify unintended effects to the plant composition when warranted. To provide a platform for the safety assessment, the GM crop is compared to non-GM comparators in what is typically referred to as composition equivalence testing. New technologies, such as mass spectrometry and well-designed antibody-based methods, allow better analytical measurements of crop composition, including endogenous allergens. Many of the analytical methods and their intended uses are based on regulatory guidance documents, some of which are outlined in globally recognized documents such as Codex Alimentarius. In certain cases, animal models are recommended by some regulatory agencies in specific countries, but there is typically no hypothesis or justification of their use in testing the safety of GM crops. The quality and standardization of testing methods can be supported, in some cases, by employing good laboratory practices (GLP) and is recognized in China as important to ensure quality data. Although the number of recommended, in some cases, required methods for safety testing are increasing in some regulatory agencies, it should be noted that GM crops registered to date have been shown to be

  1. Globalisation and blood safety.

    Science.gov (United States)

    Farrugia, Albert

    2009-05-01

    Globalisation may be viewed as the growing interdependence of countries worldwide through the increasing volume and variety of cross-border transactions in goods and services, and also through the more rapid and widespread diffusion of technology. Globalisation is not just an economic phenomenon, although it is frequently described as such, but includes commerce, disease and travel, and immigration, and as such it affects blood safety and supply in various ways. The relatively short travel times offered by modern aviation can result in the rapid spread of blood-borne pathogens before measures to counteract transmission can be put in place; this would have happened with SARS if the basic life cycle of the SARS virus included an asymptomatic viraemia. This risk can be amplified by ecological factors which effect the spread of these pathogens once they are transferred to a naïve ecosystem, as happened with West Nile Virus (WNV) in North America. The rationalization and contraction of the plasma products industry may be viewed as one aspect of globalisation imposed by the remorseless inevitability of the market; the effect of this development on the safety and supply of products has yet to be seen, but the oversight and assurance of a shrinking number of players will present particular challenges. Similarly, the monopolization of technology, through patent enforcement which puts access beyond the reach of developing countries, can have an effect on blood safety. The challenges presented to blood safety by globalisation are heightening the tensions between the traditional focus on the product safety - zero risk paradigm and the need to view the delivery of safe blood as an integrated process. As an illustration of this tension, donor deferral measures imposed by globalisation-induced risks such as vCJD and WNV have resulted in the loss of the safest and most committed portion of the blood donor population in many Western countries, leading to an increased risk to

  2. 2013 Traffic Safety Culture Index

    Science.gov (United States)

    ... death in the United States. 2013 Traffic Safety Culture Index January 2014 607 14th Street, NW, Suite ... org | 202-638-5944 Title 2013 Traffic Safety Culture Index (January 2014) About the Sponsor AAA Foundation ...

  3. Safety Pilot Model Deployment Data

    Data.gov (United States)

    Department of Transportation — This data were collected during the Safety Pilot Model Deployment (SPMD). The data sets that these entities will provide include basic safety messages (BSM), vehicle...

  4. Flu Vaccine Safety and Pregnancy

    Science.gov (United States)

    ... Types Seasonal Avian Swine/Variant Pandemic Other Flu Vaccine Safety and Pregnancy Questions & Answers Language: English (US) ... allergic conditions. How is the safety of flu vaccines in pregnant women monitored? CDC and FDA conduct ...

  5. Biotoxin Safety and Waste Management

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  6. Animal Cloning and Food Safety

    Science.gov (United States)

    ... Home For Consumers Consumer Updates Animal Cloning and Food Safety Share Tweet Linkedin Pin it More sharing options ... on clones of livestock animals to evaluate the safety of food from these animals. The resulting report, called a ...

  7. Older Adults and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... JSR 286) Actions ${title} Loading... Older Adults and Food Safety An adage states, "With age, comes wisdom." Hopefully ...

  8. Ground Beef and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... JSR 286) Actions ${title} Loading... Ground Beef and Food Safety Questions about "ground meat" or "hamburger" have always ...

  9. FLUOR HANFORD SAFETY MANAGEMENT PROGRAMS

    Energy Technology Data Exchange (ETDEWEB)

    GARVIN, L. J.; JENSEN, M. A.

    2004-04-13

    This document summarizes safety management programs used within the scope of the ''Project Hanford Management Contract''. The document has been developed to meet the format and content requirements of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''. This document provides summary descriptions of Fluor Hanford safety management programs, which Fluor Hanford nuclear facilities may reference and incorporate into their safety basis when producing facility- or activity-specific documented safety analyses (DSA). Facility- or activity-specific DSAs will identify any variances to the safety management programs described in this document and any specific attributes of these safety management programs that are important for controlling potentially hazardous conditions. In addition, facility- or activity-specific DSAs may identify unique additions to the safety management programs that are needed to control potentially hazardous conditions.

  10. Occupational Safety and Health Administration

    Science.gov (United States)

    ... Twitter Instagram RSS Subscribe Occupational Safety and Health Administration English | Spanish MENU OSHA English | Spanish Search A ... STATES DEPARTMENT OF LABOR Occupational Safety and Health Administration 200 Constitution Ave., NW, Washington, DC 20210 800- ...

  11. National Highway Traffic Safety Administration

    Science.gov (United States)

    ... of Transportation and the National Highway Traffic Safety Administration are working to support the development of automated ... USA.gov WhiteHouse.gov National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 ...

  12. Probiotics: Safety and Side Effects

    Science.gov (United States)

    ... of this page please turn JavaScript on. Feature: Probiotics Safety and Side Effects Past Issues / Winter 2016 ... Says About the Safety and Side Effects of Probiotics Whether probiotics are likely to be safe for ...

  13. Nuclear reactor safety device

    Science.gov (United States)

    Hutter, Ernest

    1986-01-01

    A safety device is disclosed for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of an upward thermal excursion. Such safety device comprises a laminated helical ribbon configured as a tube-like helical coil having contiguous helical turns with slidably abutting edges. The helical coil is disclosed as a portion of a drive member connected axially to the control rod. The laminated ribbon is formed of outer and inner laminae. The material of the outer lamina has a greater thermal coefficient of expansion than the material of the inner lamina. In the event of an upward thermal excursion, the laminated helical coil curls inwardly to a smaller diameter. Such inward curling causes the total length of the helical coil to increase by a substantial increment, so that the control rod is axially repositioned by a corresponding amount to reduce the power output of the reactor.

  14. Enhancing supply vessel safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    A supply-vessel bridge installation consists of a navigating bridge and a control position aft, from which operators control the ship when close to rigs or platforms, and operate winches and other loading equipment. The international Convention for Safety of I Ale at Sea (SOLAS) does not regulate the layout, so design varies to a large degree, often causing an imperfect working environment. As for other types of ships, more than half the offshore service vessel accidents at sea are caused by bridge system failures. A majority can be traced back to technical design, and operational errors. The research and development project NAUT-OSV is a response to the offshore industry's safety concerns. Analysis of 24 incidents involving contact or collision between supply vessels and offshore installations owned or operated by Norwegian companies indicated that failures in the bridge system were often the cause.

  15. Road safety in practice

    CERN Multimedia

    2003-01-01

    On the 23 and 25 September come and test your driving skills and your reflexes on the two days of road safety in practice! To conclude the poster and article campaign on this topic which started last year, CERN now comes to the practical part with demonstrations, like a spectacular overturning test, information stands, where you can meet safety personnel from France, Switzerland and CERN, and discussions & debates. Come to ... ... the Meyrin site on 23 September: - From 8:30 hrs, stands and demonstrations on the parking site Cèdres, behind the Restaurant no. 1. - From 9:30 hrs, discussions and debates in the main auditorium. ... the Prévessin site on 25 September: - From 8:30 hrs, stands and demonstrations on the parking site of the building 866. - From 14:00 hrs, discussions and debates in the AB auditorium, building 864.

  16. New safety course!

    CERN Multimedia

    DG Unit

    2009-01-01

    Do you need to know how to use the portable breathing apparatus ("Biocell") in order to work at CERN? If so, you will need to sign up for a new course on how to use this personal protection system. The training starts with a refresher on how the Biocell works. You will then have an opportunity to use a training unit in realistic conditions simulating a tunnel incident: darkness, non-toxic smoke, the noise of a gas leak, an audible alarm to signal oxygen deficiency, and flashing hazard lights. Once you have participated in this 90-minute training session (in French or English), you will know how to use your Biocell in the event of an emergency. In the near future, completion of the course will be made mandatory in order to obtain access rights for the LHC and SPS tunnels. Register for the Biocell course through the Safety training catalogue.Contact: mailto:safety.training@cern.ch

  17. New safety course!

    CERN Multimedia

    HR Department

    2009-01-01

    Do you need to know how to use the portable breathing apparatus ("Biocell") in order to work at CERN? If so, you will need to sign up for a new course on how to use this personal protection system. The training starts with a refresher on how the Biocell works. You will then have an opportunity to use a training unit in realistic conditions simulating a tunnel incident: darkness, non-toxic smoke, the noise of a gas leak, an audible alarm to signal oxygen deficiency, and flashing hazard lights. Once you have participated in this 90-minute training session (in French or English), you will know how to use your Biocell in the event of an emergency. In the near future, completion of the course will become mandatory in order to obtain access rights for the LHC and SPS tunnels. Register for the Biocell course through the Safety training catalogue. Contact: mailto:safety.training@cern.ch

  18. Laquinimod Safety Profile

    DEFF Research Database (Denmark)

    Sørensen, Per Soelberg; Comi, Giancarlo; Vollmer, Timothy L

    2017-01-01

    the safety profile of laquinimod versus placebo. Adverse events (AEs), laboratory value changes, and potential risks identified in preclinical studies were evaluated in participants in ALLEGRO and BRAVO treated with at least one dose of laquinimod or matching placebo (1:1 random assignment). RESULTS......: In total, 1988 patients received at least one dose of study drug (laquinimod: n = 983 [mean ± SD duration, 639 ± 190 days]; placebo: n = 1005 [mean ± SD duration, 627 ± 198 days]). Early terminations due to AEs were infrequent (laquinimod: 6.4%; placebo: 4.7%). Death was reported in four patients...... laquinimod studies demonstrate a safety profile comprising benign or manageable AEs and asymptomatic laboratory findings with a clear temporal pattern. Potential risks noted in preclinical studies were not observed....

  19. HEALTHY AND SAFETY SWIMMING

    Directory of Open Access Journals (Sweden)

    Suleyman CEYLAN

    2005-08-01

    Full Text Available Swimming is a sport which has own rules, styles, and fields, however, is one of the most performed avocation as amateur and a joke especially at summer months. Although one of the most beneficial sports, swimming can cause a number of several health problems such as infectious diseases, allergic events, or traumas, if it is not done at adequate conditions and eligible style. In this paper, the factors such as preparing to swimming, health and safety features of swimming areas, important health behavior, wearing, feeding etc. that effected healthy swimming will be reviewed and evaluated. At the last part of the paper, it will be made some proposals to readers on healthy and safety swimming. [TAF Prev Med Bull 2005; 4(4.000: 209-221

  20. Safety Intervention Effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    ZIMMERMAN, R.O.

    2001-10-16

    Judging safety intervention effectiveness is often left up to the eye of the beholder. Safety and Health Professionals must increase skills and increase their body of knowledge, based on scientific evidence, that can be applied confidently in the workplace. Evidence must be collected and analyzed to separate the interventions of the month with those that stand the test of time. The book Guide to Evaluating the Effectiveness of Strategies for Preventing Work injuries DHHS (NIOSH) Publication No. 2001-119, April 2001, serves as a primary reference. An example study related to biorhythms, popular in the late 1970s, is used to illustrate the separating of scientific evidence and pseudo-science hype. The cited biorhythm study focuses on the relationship of the accident dates and the three biorhythmic cycles (physical, emotional, and intelligence).

  1. Food Safety Nets:

    OpenAIRE

    Haggblade, Steven; Diallo, Boubacar; Staatz, John; Theriault, Veronique; Traoré, Abdramane

    2013-01-01

    Food and social safety nets have a history as long as human civilization. In hunter gatherer societies, food sharing is pervasive. Group members who prove unlucky in the short run, hunting or foraging, receive food from other households in anticipation of reciprocal consideration at a later time (Smith 1988). With the emergence of the first large sedentary civilizations in the Middle East, administrative systems developed specifically around food storage and distribution. The ancient Egyptian...

  2. Aquatic sports and safety

    Directory of Open Access Journals (Sweden)

    Володимир Миколайович Зюзь

    2016-11-01

    Full Text Available Aquatic sports or boating, has become a mass sport and recreation. It is as delightful a holiday as one might wish for, gaining strength around the world and especially in Ukraine. More and more people are eager to see the beauty of the underwater world, enjoy exciting sailing races, long journeys along beautiful rivers and unexplored areas, as well as smooth sailing at the height of the season. The article analyzes the modern aquatic (water tourism hazards that can lie in wait for a person in the water during camping trips and various boating competitions. This kind of sports is dangerous in principle, as aqueous medium is always perilous whether water is rough or calm. Accidents are always possible and tourists may find themselves in water, hypothermia, impossibility to breathe, impactions against different objects in the water resulting. Ships, food and equipment may also be damaged or lost, that is the consequences may be extremely negative. This article includes description of boating types, extreme forms of boating, the design features of the swimming facilities used in boating, practical skills and the ability to apply the facilities; characteristics of waves and currents; types of rivers; forms and methods of transportation and rescue of the drowning people; rendering assistance and first aid to the victims; promotion of safety rules on the water during the boating. The main goals and objectives in preparing aquatic tourism professionals whose main duty is safety, training topics, theoretical and practical materials for training the basics of safety that makes it possible to get acquainted with all the requirements have been discussed. The first attempt to develop general educational standards in training professionals in water sports and safety basing on the new priorities and the principles of modern vocational education has been made in the articles

  3. Challenges of safety evaluation.

    Science.gov (United States)

    Wiesner, Jacqueline

    2014-12-02

    Each application for authorisation of a medicinal product must be accompanied by the particulars and documents referred to in Directive 2001/83/EC on the Community code relating to medicinal products for human use. Details on the documentation needed for traditional herbal medicinal products (THMP) are given in article 16c of the above mentioned Directive. It is pointed out that a bibliographic review of safety data together with an expert report and additional data, if necessary, are required. The Committee on Herbal Medicinal Products (HMPC) provides in its "Guideline on the use of the CTD format in the preparation of a registration application for traditional herbal medicinal products" (EMA/HMPC/71049/2007 Rev. 1) guidance on how to present the information and the dossier needed for an application. There, in agreement with the Directive 2001/83/EC, a bibliographical review of safety data is required within the "Non-clinical Overview". However, it is assumable that for such products, with a long tradition of usage bibliographical information relating to non-clinical safety are available, even if incomplete or not in accordance with today׳s state of the art. In the "Guideline on non-clinical documentation for herbal medicinal products in applications for marketing authorisation (bibliographical and mixed applications) and in applications for simplified registration" (EMEA/HMPC/32116/2005) it is reflected how to deal with such an incomplete set of data for traditional herbal medicinal products and crucial information are highlighted. This article will focus on the explanation of the requirements needed for the non-clinical safety evaluation of THMPs and some detailed explanations of the performance and interpretation of the mutagenicity studies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  4. Chemical Safety and Security

    National Research Council Canada - National Science Library

    Sydnes, Leiv K

    2012-01-01

    ... a Conference on International Cooperation and Chemical Safety & Security in The Hague, Netherlands. The meeting was well attended, with some 350 participants on site and several hundred following the presentations through a webcast. The purpose of the conference was to promote the goals of the Chemical Weapons Convention (CWC) by highlighting the achievements of OPCW, but more importantly, by analyzing the challenges that lie ahead and discuss with important stakeholders how these challenges can be ...

  5. Safety Culture Onboard Ships

    OpenAIRE

    Ek, Åsa; Olsson, Ulf; Akselsson, Roland

    2000-01-01

    A project focusing on identifying and describing maritime risks is being conducted in the heavily trafficked water area of the Sound, situated in northern Europe between Sweden and Denmark. This paper reports of a test of a first version of a questionnaire constructed for measuring safety culture onboard vessels.48 crew members on a Swedish registered passenger/cargo ship completed and returned the questionnaire. The crew members were able to complete the questionnaire with few unanswered que...

  6. Cardiovascular safety of etoricoxib

    Directory of Open Access Journals (Sweden)

    Viktoriya Georgievna Barskova

    2011-01-01

    Full Text Available Meticulous attention is paid to the cardiovascular safety of nonsteroidal anti-inflammatory drugs (NSAIDs, the so-called selective cyclooxy-genase 2 (COX-2 inhibitors in particular. The author considers precisely this matter in case of Russia's recent NSAID etoricoxib that has been tested along with other most studied medications from this group, by applying one of the latest meta-analyses. The EULAR recommendations to use NSAIDs are given.

  7. SAR Simulations & Safety.

    Science.gov (United States)

    Fiedler, Thomas M; Ladd, Mark E; Bitz, Andreas K

    2017-03-20

    At ultra-high fields, the assessment of radiofrequency (RF) safety presents several new challenges compared to low-field systems. Multi-channel RF transmit coils in combination with parallel transmit techniques produce time-dependent and spatially varying power loss densities in the tissue. Further, in ultra-high-field systems, localized field effects can be more pronounced due to a transition from the quasi stationary to the electromagnetic field regime. Consequently, local information on the RF field is required for reliable RF safety assessment as well as for monitoring of RF exposure during MR examinations. Numerical RF and thermal simulations for realistic exposure scenarios with anatomical body models are currently the only practical way to obtain the requisite local information on magnetic and electric field distributions as well as tissue temperature. In this article, safety regulations and the fundamental characteristics of RF field distributions in ultra-high-field systems are reviewed. Numerical methods for computation of RF fields as well as typical requirements for the analysis of realistic multi-channel RF exposure scenarios including anatomical body models are highlighted. In recent years, computation of the local tissue temperature has become of increasing interest, since a more accurate safety assessment is expected because temperature is directly related to tissue damage. Regarding thermal simulation, bio-heat transfer models and approaches for taking into account the physiological response of the human body to RF exposure are discussed. In addition, suitable methods are presented to validate calculated RF and thermal results with measurements. Finally, the concept of generalized simulation-based specific absorption rate (SAR) matrix models is discussed. These models can be incorporated into local SAR monitoring in multi-channel MR systems and allow the design of RF pulses under constraints for local SAR. Copyright © 2017 Elsevier Inc. All rights

  8. [Food safety of GMOs].

    Science.gov (United States)

    Joudrier, P

    2009-01-01

    In this presentation, we review the complexity of the different biological events which occur during life cell cycles. Indeed transgenesis is not an unknown event for cells. In the second part of this article, the complex and complete evaluation process destined to assure the food safety of GMOs, before they are released on the market, is describd. Some ansers to questions frequently asked about the GMOs are given. It is concludedthat GMOs are probably more safe than their conventional non-GM counterpart.

  9. Complexity and Safety (FAA)

    Science.gov (United States)

    2016-10-27

    the research as evidence that they need to ask manufacturers to provide documented safety cases rather than just standards compliance Manufacturers ...P points * #FC * FO cpu mem 1 4 1 1 4 Par1..Par4 4 1 2 1 8 Mon1..Mon2 2 1 1 1 2 Cmd1..Cmd2 2 1 1 1 2 1 1 3 6 Pdl1..Pdl2 2 1 1 1 2 Select 1 1 1 2 2

  10. Safety of irradiated foods

    Energy Technology Data Exchange (ETDEWEB)

    Iwahara, Shigeo (Foods Medicines Safety Center (Japan)); Kobayashi, Kazuo

    1983-01-01

    The safety of 7 irradiated foods (potato, onion, rice, wheat, vienna sausage, fish paste and mandarine orange), in terms of 2-year long-term toxic effect, reproductive physiology and possible teratogenesis, was studied using 3 generations of rats, mice and monkeys. The genetic toxicity was studied by means of various mutagenicity tests. The details of the studies conducted by the authors to date and some overseas data were reported. The available data showed no toxic effect.

  11. Pesticides and food safety

    OpenAIRE

    Ötegen, Volkan Recai; Akbaba, Muhsin; Nazlıcan, Ersin; Kurt, Burak

    2017-01-01

    Besidesprevention of tropical diseases, pesticides are also used to make agriculturalactivities fertile. But pesticides are potentially harmful to our health andmay be toxic to the immune, reproductive and nervous systems. Afterapplication; pesticide residues consist depending on factors such as plantspecies, time of administration, how it applied. While pesticides make foodsupply sustainable, there are concerns about residues in food that peopleconsume. Therefore food safety concept introduc...

  12. HEALTHY AND SAFETY SWIMMING

    OpenAIRE

    Suleyman CEYLAN

    2005-01-01

    Swimming is a sport which has own rules, styles, and fields, however, is one of the most performed avocation as amateur and a joke especially at summer months. Although one of the most beneficial sports, swimming can cause a number of several health problems such as infectious diseases, allergic events, or traumas, if it is not done at adequate conditions and eligible style. In this paper, the factors such as preparing to swimming, health and safety features of swimming areas, important healt...

  13. DOE standard: Firearms safety

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Information in this document is applicable to all DOE facilities, elements, and contractors engaged in work that requires the use of firearms as provided by law or contract. The standard in this document provides principles and practices for implementing a safe and effective firearms safety program for protective forces and for non-security use of firearms. This document describes acceptable interpretations and methods for meeting Order requirements.

  14. Fire safety of wood construction

    Science.gov (United States)

    Robert H. White; Mark A. Dietenberger

    2010-01-01

    Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

  15. Safety for Teen-Agers.

    Science.gov (United States)

    Pounds, Elenore T.; And Others

    This booklet is designed for teenage students and discusses safety and first aid. The first part of the booklet covers safety instruction, causes of accidents, what it means to be safety-minded, and discusses experimental safe-car design and testing programs. The second part presents basic descriptions for first aid treatment of common injuries…

  16. Moving forward with safety culture.

    Science.gov (United States)

    Weber, Michael

    2012-04-01

    Radiation safety and protection of people are shared goals of the Health Physics Society (HPS) and the U.S. Nuclear Regulatory Commission (NRC). A positive safety culture contributes to achieving radiation safety and protection of people, which are important to both the HPS and the NRC. Through unprecedented collaboration and engagement with diverse stakeholders, the NRC and the stakeholders developed a Safety Culture Policy Statement. The policy statement defines safety culture and describes the traits of a positive safety culture. Consideration of both safety and security issues and the interface of safety and security are underlying principles that support the policy. Examination of significant events, both within the nuclear industry and in society at large, illustrates how weaknesses in these traits can contribute to the occurrence and consequences of safety incidents, including serious injury and loss of life. With the policy statement in place, the NRC is moving forward with outreach and education about safety culture. Health physicists and other radiation safety specialists play an essential role in enhancing safety culture.

  17. Safety profile of levetiracetam.

    Science.gov (United States)

    Arroyo, Santiago; Crawford, Pamela

    2003-05-01

    A good balance between safety and tolerability is necessary for an antiepileptic drug (AED) to be successful in the management of patients with epilepsy. Levetiracetam is one of the new generation of AEDs licensed as an add-on therapy for the treatment of patients with partial-onset seizures. Leveti-racetam's mechanisms of action are not fully understood. Controlled clinical trials, open-label studies, and postmarketing surveillance indicate that leveti-racetam has a favorable safety profile characterized by little effect on vital signs or clinical laboratory values, reported adverse events that are mild to moderate, and no known drug-drug interactions. The tolerability of levetiracetam may extend to both pediatric and elderly patients based on analyses of small numbers of patients. Tolerability is maintained over the long term. Levetirac-etam does not appear to have a different safety profile in learning-disabled patients. Levetiracetam appears to have a good balance between tolerability and efficacy in the treatment of a wide variety of patients with partial epilepsy.

  18. Patient safety: lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Bagian, James P. [National Center for Patient Safety, Department of Veterans Affairs, Ann Arbor, MI (United States)

    2006-04-15

    The traditional approach to patient safety in health care has ranged from reticence to outward denial of serious flaws. This undermines the otherwise remarkable advances in technology and information that have characterized the specialty of medical practice. In addition, lessons learned in industries outside health care, such as in aviation, provide opportunities for improvements that successfully reduce mishaps and errors while maintaining a standard of excellence. This is precisely the call in medicine prompted by the 1999 Institute of Medicine report ''To Err Is Human: Building a Safer Health System.'' However, to effect these changes, key components of a successful safety system must include: (1) communication, (2) a shift from a posture of reliance on human infallibility (hence ''shame and blame'') to checklists that recognize the contribution of the system and account for human limitations, and (3) a cultivation of non-punitive open and/or de-identified/anonymous reporting of safety concerns, including close calls, in addition to adverse events. (orig.)

  19. Safety of antiobesity drugs.

    Science.gov (United States)

    Cheung, Bernard Man Yung; Cheung, Tommy Tsang; Samaranayake, Nithushi Rajitha

    2013-08-01

    Obesity is a major health problem worldwide. Although diet and physical activity are crucial in the management of obesity, the long-term success rate is low. Therefore antiobesity drugs are of great interest, especially when lifestyle modification has failed. As obesity is not an immediate life-threatening disease, these drugs are required to be safe. Antiobesity drugs that have been developed so far have limited efficacies and considerable adverse effects affecting tolerability and safety. Therefore, most antiobesity drugs have been withdrawn. Fenfluramine and dexfenfluramine were withdrawn because of the potential damage to heart valves. Sibutramine was associated with an increase in major adverse cardiovascular events in the Sibutramine Cardiovascular Outcomes (SCOUT) trial and it was withdrawn from the market in 2010. Rimonabant was withdrawn because of significant psychiatric adverse effects. Orlistat was approved in Europe and the United States for long-term treatment of obesity, but many patients cannot tolerate its gastrointestinal side effects. Phentermine and diethylpropion can only be used for less than 12 weeks because the long-term safety of these drugs is unknown. Ephedrine and caffeine are natural substances but the effects on weight reduction are modest. As a result there is a huge unmet need for effective and safe antiobesity drugs. Recently lorcaserin and topiramate plus phentermine have been approved for the treatment of obesity but long-term safety data are lacking.

  20. Safety at your service

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    You might think that only twelve people to man twelve different services, each needing several people could be a problem. Not for the DGS-SEE-SV Section! We can now reveal their magic formula.   From risk management to prevention and follow-up of accidents, from safety training to hunting for pollutants in buildings and providing safety input for calls for tenders, the DGS-SEE-SV’s services underpin virtually every aspect of CERN’s daily life. “The section was set up in 2011 to meet the Organization's needs more effectively", explains François Angerand, head of the DGS-SEE-SV section. "For some activities, such as providing safety input for calls for tenders, our Section acts as an interface between the Departments and all the other services of the HSE Unit. In other cases, we ourselves provide direct support to the Departments.” “Safety” is synonymous with “prevention”: the DGS-...

  1. Health and Safety First

    CERN Multimedia

    2013-01-01

    At CERN, health and safety underpin everything we do. We have strict operational procedures in place, as well as health, safety and environment (HSE) requirements to make our working environment as safe as possible. It’s everyone’s responsibility to follow these procedures and requirements to keep ourselves, and our colleagues, safe. We have a very good safety and operational record at CERN stretching back almost 60 years, but there is never room for complacency.   With this very much in mind, we have developed a robust plan for implementation if something unforeseen goes wrong.  Because however careful we all are, accidents do happen, and the mark of any organisation that aspires to be among the best in the world is how quickly and efficiently it acts when they do. A small team made up of people from several departments at CERN has produced a strategic crisis management plan that we can put into action should a major incident occur.  This plan focuses on...

  2. An exercise in safety

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    On 14 October, a large-scale evacuation exercise took place. Ten buildings (1-2-3-4-50-51-52-53-58-304), with a total capacity of almost 1900 people, were successfully evacuated.   The exercise, which for the first time involved all of the central buildings on the Meyrin site, was organised by the PH Department in collaboration with the HSE Unit, the GS Department and the safety officers of all the various departments involved. On the day, around 400 people were evacuated in just a few minutes.  “It took us three months to prepare for the exercise,” explains Niels Dupont, safety officer for the PH Department, who organised the exercise. “Around 100 people: safety officers, firefighters, emergency guides, observers, representatives from the control centre, etc. attended four preparatory meetings and five training sessions. We also purchased equipment such as evacuation chairs, high-visibility vests and signs to mark the evacuation route.” The dec...

  3. Safety design guide for safety related systems for CANDU 9

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of); Wright, A.C.D. [Atomic Energy of Canada Ltd., Toronto (Canada)

    1996-03-01

    In general, two types of safety related systems and structures exist in the nuclear plant; The one is a systems and structures which perform safety functions during the normal operation of the plant, and the other is a systems and structures which perform safety functions to mitigate events caused by failure of the normally operating systems or by naturally occurring phenomena. In this safety design guide, these systems are identified in detail, and the major events for which the safety functions are required and the major safety requirements are identified in the list. As the probabilistic safety assessments are completed during the course of the project, additions or deletions to the list may be justified. 3 tabs. (Author) .new.

  4. Safety-barrier diagrams as a safety management tool

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan

    2009-01-01

    Networks is discussed. Important advantages of safety-barrier diagrams as compared to other graphical risk-analysis methods are, firstly, the relative simplicity that supports communication with non-expert stakeholders and, secondly, the focus on deliberately inserted safety systems that supports......Safety-barrier diagrams and “bow-tie” diagrams have become popular methods in risk analysis and safety management. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The latter's relation to other methods such as fault trees and Bayesian...... the management and maintenance of these systems. Safety-barrier diagrams provide a useful framework for an electronic data structure that integrates information from risk analysis with operational safety management....

  5. Safety of VVER-440 reactors

    CERN Document Server

    Slugen, Vladimir

    2011-01-01

    Safety of VVER-440 Reactors endeavours to promote an increase in the safety of VVER-440 nuclear reactors via the improvement of fission products limitation systems and the implementation of special non-destructive spectroscopic methods for materials testing. All theoretical and experimental studies performed the by author over the last 25 years have been undertaken with the aim of improving VVER-440 defence in depth, which is one of the most important principle for ensuring safety in nuclear power plants. Safety of VVER-440 Reactors is focused on the barrier system through which the safety pri

  6. European consumers and beef safety

    DEFF Research Database (Denmark)

    Van Wezemael, Lynn; Verbeke, Wim; Kügler, Jens Oliver

    2010-01-01

    consumption decision making process. Eight focus group discussions were performed with a total of 65 beef consumers in four European countries. Content analysis revealed that European consumers experienced difficulties in the assessment of the safety of beef and beef products and adopted diverging uncertainty......European beef consumption has been gradually declining during the past decades, while consumers' concerns about beef safety have increased. This paper explores consumer perceptions of and interest in beef safety and beef safety information, and their role in beef safety assessment and the beef...... reduction strategies. These include the use of colour, labels, brands and indications of origin as cues signalling beef safety. In general, consumer trust in beef safety was relatively high, despite distrust in particular actors....

  7. Putting Safety in the Frame

    Directory of Open Access Journals (Sweden)

    Valerie Jean O’Keeffe

    2015-06-01

    Full Text Available Current patient safety policy focuses nursing on patient care goals, often overriding nurses’ safety. Without understanding how nurses construct work health and safety (WHS, patient and nurse safety cannot be reconciled. Using ethnography, we examine social contexts of safety, studying 72 nurses across five Australian hospitals making decisions during patient encounters. In enacting safe practice, nurses used “frames” built from their contextual experiences to guide their behavior. Frames are produced by nurses, and they structure how nurses make sense of their work. Using thematic analysis, we identify four frames that inform nurses’ decisions about WHS: (a communicating builds knowledge, (b experiencing situations guides decisions, (c adapting procedures streamlines work, and (d team working promotes safe working. Nurses’ frames question current policy and practice by challenging how nurses’ safety is positioned relative to patient safety. Recognizing these frames can assist the design and implementation of effective WHS management.

  8. Software Safety Risk in Legacy Safety-Critical Computer Systems

    Science.gov (United States)

    Hill, Janice; Baggs, Rhoda

    2007-01-01

    Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

  9. Transformational and passive leadership as cross-level moderators of the relationships between safety knowledge, safety motivation, and safety participation.

    Science.gov (United States)

    Jiang, Lixin; Probst, Tahira M

    2016-06-01

    While safety knowledge and safety motivation are well-established predictors of safety participation, less is known about the impact of leadership styles on these relationships. The purpose of the current study was to examine whether the positive relationships between safety knowledge and motivation and safety participation are contingent on transformational and passive forms of safety leadership. Using multilevel modeling with a sample of 171 employees nested in 40 workgroups, we found that transformational safety leadership strengthened the safety knowledge-participation relationship, whereas passive leadership weakened the safety motivation-participation relationship. Under low transformational leadership, safety motivation was not related to safety participation; under high passive leadership, safety knowledge was not related to safety participation. These results are discussed in light of organizational efforts to increase safety-related citizenship behaviors. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

  10. [Ambulatory surgery: safety, quality].

    Science.gov (United States)

    Jouffroy, L

    2001-01-01

    Demands related to regulation of Ambulatory surgery in France and to expectations of the patients implies that we can be able to proof that ambulatory organization guarantees total patient care with optimal safety conditions; and that detection of unexpected events is the first step in a larger approach to continue quality improvement and minimize risks for patients. To achieve these goals, we suggest a list of means based on international ambulatory surgery definitions, including clinical indicators, frequent asked questions and measurement of patient satisfaction.

  11. Cryogen Safety Course 8876

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-06-13

    Cryogenics (from the Greek word κρvoζ, meaning frost or icy cold) is the study of the behavior of matter at very cold temperatures. The purpose of this course is to provide trainees with an introduction to cryogen use, the hazards and potential accidents related to cryogen systems, cryogen safety components, and the requirements that govern the design and use of cryogen systems at Los Alamos National Laboratory (LANL). The knowledge you gain will help you keep your workplace safe for yourself and your coworkers.

  12. IMPROVING PATIENT SAFETY:

    DEFF Research Database (Denmark)

    Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

    Every year millions of patients worldwide suffer injury or death due to unsafe care, thus improving patient safety is both a national and international priority. A developmental project involving University College Zealand and clinical partners in the region focused upon the improvement of patient...... with respect to the prevention of clinical errors - Theoretical teaching intervention - Evaluation of effects of theoretical teaching intervention following the intervention and after 1 year - Quantitative and qualitative data collected in both the educational and clinical settings using a before and after...

  13. The Psychology of Safety

    Science.gov (United States)

    Anderson, Brenda Lindley

    2011-01-01

    Many studies of mishaps show that human error is a factor in a significant majority of accidents. Trying to decide how to change human behavior to be safer is generally the biggest challenge of any safety program. However, understanding the human psyche is the first step to changing behavior. Many studies focus on the before and after of an accident, but what about the thoughts of a person in the commission of an unsafe act? This is a less understood area. Examining it reveals why it is not well comprehended. This paper attempts to examine a part of the thought process, with an eye to helping influence people to less hurtful actions.

  14. Radiological safety and control

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Kyeong Won; You, Young Soo; Chang, Sea Young; Yoon, Yeo Chang; Yoon, Suk Chul; Kim, Jang Yeol; Lee, Tae Young; Lee, Bong Jae; Kim, Bong Hwan; Lee, Jong Il; Jeong, Juk Yeon; Lee, Sang Yeol; Jeong, Kyung Ki; Jeong, Rae Ik; Kim, Jong Su; Han, Young Dae; Lee, Hyung Sub; Kim, Chang Kyung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-01-01

    This report describes the annual results of radiological safety and control program. This program includes working area monitoring (WAM), personnel radiation monitoring (PRM), education for radiation protection (ERP), preparing for KMRR operation and developing QA program on personal dose evaluation. As a result, the objectives of radiation protection have been achieved satisfactorily through the WAM, PRM and ERP. The QA program on personal dose evaluation has been approved by the MOST according to the Ministerial Ordinance (No. 1992-15). KAERI has also been authorized as a specialized processor for personal dose evaluation. 32 tabs., 20 figs. (Author) .new.

  15. SAFETY DESIGN AERONAUTICAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Aleksandr Tamargazin

    2012-09-01

    Full Text Available  The article deals with contemporary issues of safety of aircraft structures, which are fundamental in the choice of approaches to the continuing airworthiness of aircraft which re fundamental in the choice of approaches to continuing airworthiness of aircraft. The features of the formation methods of technical maintenance of aircraft in view of the design type are considered. Experience of aircraft maintenance has shown that the use of combined operational vitality in a number of cases has helped to prevent the catastrophic destruction of aircraft at a time when high enough qualifications for airline personnel were not satisfied.

  16. Fire safety in space

    DEFF Research Database (Denmark)

    Jomaas, Grunde; Torero, Jose L.; Eigenbrod, Christian

    2015-01-01

    An international research team has been assembled to reduce the uncertainty and risk in the design of spacecraft fire safety systems by testing material samples in a series of flight experiments (Saffire 1, 2, and-3) to be conducted in an Orbital Science Corporation Cygnus vehicle after it has...... towers (about 5 s) and parabolic flights (about 20 s). In contrast to sounding rockets, the experiments offer a much larger volume, and the reduction in the oxygen concentration during the Saffire experiments will be minimal. The selection of the experimental settings for the first three Saffire...

  17. Perspectives on reactor safety

    Energy Technology Data Exchange (ETDEWEB)

    Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States)

    1994-03-01

    The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

  18. Trucker Safety PSA (:60)

    Centers for Disease Control (CDC) Podcasts

    2015-03-03

    This 60 second public service announcement is based on the March 2015 CDC Vital Signs report. In 2012 in the United States, about 317,000 motor vehicle crashes involved a large truck. Twenty-six thousand truck drivers and their passengers were injured in these crashes, and about 700 died. Learn what can be done to help truck drivers stay safe.  Created: 3/3/2015 by National Institute for Occupational Safety and Health (NIOSH).   Date Released: 3/3/2015.

  19. KAZAKHSTAN ECONOMIC SAFETY RISE

    Directory of Open Access Journals (Sweden)

    G. G. Rakhmatulina

    2011-01-01

    Full Text Available Economic safety of the Republic of Kazakhstan essentially depends on how the Republic’s transit potential is used and how internal demands in energy resources are met. There are many legal, investment, technological and other challenges with respect to these aspects. Main ways to solvethe problems are: to form potential transit development legislation conforming to respective international standards; to take specific transport infrastructure modernization measures; to simplify railway and road transport state border crossing procedures; to develop service facilitiesalong interstate trunk roads; to improve competitiveness of domestic oil-processing enterprises; to further develop integrative cooperation withRussia in the oil processing field.

  20. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! •\tErgonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 •\tErgonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive an invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  1. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will be invited by email after your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  2. ERGONOMICS safety course

    CERN Multimedia

    SC Unit

    2008-01-01

    Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive and invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

  3. 14 CFR 1274.934 - Safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

  4. Another Approach to Enhance Airline Safety: Using Management Safety Tools

    Science.gov (United States)

    Lu, Chien-tsug; Wetmore, Michael; Przetak, Robert

    2006-01-01

    The ultimate goal of conducting an accident investigation is to prevent similar accidents from happening again and to make operations safer system-wide. Based on the findings extracted from the investigation, the "lesson learned" becomes a genuine part of the safety database making risk management available to safety analysts. The airline industry is no exception. In the US, the FAA has advocated the usage of the System Safety concept in enhancing safety since 2000. Yet, in today s usage of System Safety, the airline industry mainly focuses on risk management, which is a reactive process of the System Safety discipline. In order to extend the merit of System Safety and to prevent accidents beforehand, a specific System Safety tool needs to be applied; so a model of hazard prediction can be formed. To do so, the authors initiated this study by reviewing 189 final accident reports from the National Transportation Safety Board (NTSB) covering FAR Part 121 scheduled operations. The discovered accident causes (direct hazards) were categorized into 10 groups Flight Operations, Ground Crew, Turbulence, Maintenance, Foreign Object Damage (FOD), Flight Attendant, Air Traffic Control, Manufacturer, Passenger, and Federal Aviation Administration. These direct hazards were associated with 36 root factors prepared for an error-elimination model using Fault Tree Analysis (FTA), a leading tool for System Safety experts. An FTA block-diagram model was created, followed by a probability simulation of accidents. Five case studies and reports were provided in order to fully demonstrate the usefulness of System Safety tools in promoting airline safety.

  5. Cockpit emergency safety system

    Science.gov (United States)

    Keller, Leo

    2000-06-01

    A comprehensive safety concept is proposed for aircraft's experiencing an incident to the development of fire and smoke in the cockpit. Fire or excessive heat development caused by malfunctioning electrical appliance may produce toxic smoke, may reduce the clear vision to the instrument panel and may cause health-critical respiration conditions. Immediate reaction of the crew, safe respiration conditions and a clear undisturbed view to critical flight information data can be assumed to be the prerequisites for a safe emergency landing. The personal safety equipment of the aircraft has to be effective in supporting the crew to divert the aircraft to an alternate airport in the shortest possible amount of time. Many other elements in the cause-and-effect context of the emergence of fire, such as fire prevention, fire detection, the fire extinguishing concept, systematic redundancy, the wiring concept, the design of the power supplying system and concise emergency checklist procedures are briefly reviewed, because only a comprehensive and complete approach will avoid fatal accidents of complex aircraft in the future.

  6. A milestone in safety

    CERN Multimedia

    2010-01-01

    Over recent days, we’ve achieved some historic milestones in LHC physics as we’ve made the transition from proton to ion running. These have been widely reported and I’ve communicated the news to you by e-mail. Less visible, but nonetheless vital to the functioning of the Lab, is an agreement that we’ll be signing with our Host States on 15 November. It will be the second tripartite agreement to be signed in as many months, and it is set to streamline our radiation protection and radiation safety.   The new agreement replaces existing bilateral agreements governing the procedures applying on the French and Swiss parts of the site. From an operational point of view, the new agreement simplifies matters by harmonising administrative processes while guaranteeing best practice in terms of radiation protection and radiation safety at CERN. The agreement is the result of many months of detailed discussions with the Autorité de Sûret&eac...

  7. Safety design for medical robots.

    Science.gov (United States)

    Kazanzides, Peter

    2009-01-01

    The use of robots in medicine is increasing, leading to the call for specific safety standards. This is a challenging endeavor, however, because the patient must usually be placed in the robot's workspace and the medical staff must frequently interact with the robot. Although specific safety standards for medical robots do not yet exist, there are several medical device standards and well-established principles of risk analysis and safety design that can and should be applied. This paper presents a tutorial overview of safety design for medical robots, starting with a discussion of high-level safety requirements, followed by methods for risk assessment (or hazard analysis) and a brief discussion of some sample safety strategies.

  8. Augmented reality for improved safety

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

  9. Managing School Safety in Thailand

    Directory of Open Access Journals (Sweden)

    Pachernwaat Srichai

    2013-05-01

    Full Text Available Child injuries are replacing infectious disease as the leading cause of mortality in developing countries. As school is one of the environments where children spend significant time during their formative years, school safety should be effectively managed, promoted, and prioritized. In Thailand however, school safety is considered to be of low priority compared with other educational issues, lacking effective policy, and with schools struggling to justify safety costs. This article proposes a novel application of lean thinking to control the cost, bureaucracy, and waste associated with managing and administering a safe school. Through a case study in northern Thailand, one primary school’s current safety scenario is reviewed with regard to people, finance, and operations, before applying a lean framework to improve the handling of safety suggestions. Results show significant capacity to improve the management of school safety, along with management implications and potential to expand the framework beyond Thailand.

  10. SAFETY PLATFORM OF POLISH TRANSPORT

    Directory of Open Access Journals (Sweden)

    Katarzyna CHRUZIK

    2016-03-01

    Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

  11. The International Technical Safety Forum

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The International Technical Safety Forum is a meeting of safety experts from several physics labs in Europe and the US. Since 1998 participants have been meeting every couple of years to discuss common challenges in safety matters. The Forum helps them define best practices and learn from the important lessons learned by others.   The Forum's participants in front of building 40. This year, the meeting took place at CERN from 12 to 16 April. “This year's meeting covered subjects ranging from communication and training in matters of safety, to cryogenic safety, emergency preparedness and risk analysis”, explains Ralf Trant, head of the CERN Safety Commission and organiser of this year’s Forum. Radiation protection issues are not discussed at the meeting since they involve different expertise. The goal of the Forum is to allow participants to share experience, learn lessons and acquire specific knowledge in a very open way. Round-table discussions, dedicated time for ...

  12. Seminar series on Safety matters

    CERN Multimedia

    HSE

    2010-01-01

    The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

  13. Task D: Hydrogen safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Swain, M.R.; Sievert, B.G. [Univ. of Miami, Coral Gables, FL (United States); Swain, M.N. [Analytical Technologies, Inc., Miami, FL (United States)

    1996-10-01

    This report covers two topics. The first is a review of codes, standards, regulations, recommendations, certifications, and pamphlets which address safety of gaseous fuels. The second is an experimental investigation of hydrogen flame impingement. Four areas of concern in the conversion of natural gas safety publications to hydrogen safety publications are delineated. Two suggested design criteria for hydrogen vehicle fuel systems are proposed. It is concluded from the experimental work that light weight, low cost, firewalls to resist hydrogen flame impingement are feasible.

  14. Patient safety culture among nurses.

    Science.gov (United States)

    Ammouri, A A; Tailakh, A K; Muliira, J K; Geethakrishnan, R; Al Kindi, S N

    2015-03-01

    Patient safety is considered to be crucial to healthcare quality and is one of the major parameters monitored by all healthcare organizations around the world. Nurses play a vital role in maintaining and promoting patient safety due to the nature of their work. The purpose of this study was to investigate nurses' perceptions about patient safety culture and to identify the factors that need to be emphasized in order to develop and maintain the culture of safety among nurses in Oman. A descriptive and cross-sectional design was used. Patient safety culture was assessed by using the Hospital Survey on Patient Safety Culture among 414 registered nurses working in four major governmental hospitals in Oman. Descriptive statistics and general linear regression were employed to assess the association between patient safety culture and demographic variables. Nurses who perceived more supervisor or manager expectations, feedback and communications about errors, teamwork across hospital units, and hospital handoffs and transitions had more overall perception of patient safety. Nurses who perceived more teamwork within units and more feedback and communications about errors had more frequency of events reported. Furthermore, nurses who had more years of experience and were working in teaching hospitals had more perception of patient safety culture. Learning and continuous improvement, hospital management support, supervisor/manager expectations, feedback and communications about error, teamwork, hospital handoffs and transitions were found to be major patient safety culture predictors. Investing in practices and systems that focus on improving these aspects is likely to enhance the culture of patient safety in Omani hospitals and others like them. Strategies to nurture patient safety culture in Omani hospitals should focus upon building leadership capacity that support open communication, blame free, team work and continuous organizational learning. © 2014 International

  15. System Safety Analysis Application Guide. Safety Analysis Report Update Program

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    Martin Marietta Energy Systems, Inc., (Energy Systems) is committed to performing and documenting safety analyses for facilities it manages for the Department of Energy (DOE). Safety analyses are performed to identify hazards and potential accidents; to analyze the adequacy of measures taken to eliminate, control, or mitigate hazards; and to evaluate potential accidents and determine associated risks. Safety Analysis Reports (SARs) are prepared to document the safety analysis to ensure facilities can be operated safely and in accordance with regulations. SARs include Technical Safety Requirements (TSRs), which are specific technical and administrative requirements that prescribe limits and controls to ensure safe operation of DOE facilities. These documented descriptions and analyses contribute to the authorization basis for facility operation. Energy Systems has established a process to perform Unreviewed Safety Question Determinations (USQDs) for planned changes and as-found conditions that are not described and analyzed in existing safety analyses. The process evaluates changes and as-found conditions to determine whether revisions to the authorization basis must be reviewed and approved by DOE. There is an Unreviewed Safety Question (USQ) if a change introduces conditions not bounded by the facility authorization basis. When it is necessary to request DOE approval to revise the authorization basis, preparation of a System Safety Analysis (SSA) is recommended. This application guide describes the process of preparing an SSA and the desired contents of an SSA. Guidance is provided on how to identify items and practices which are important to safety; how to determine the credibility and significance of consequences of proposed accident scenarios; how to evaluate accident prevention and mitigation features of the planned change; and how to establish special requirements to ensure that a change can be implemented with adequate safety.

  16. Optimum Safety Levels for Breakwaters

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Sørensen, John Dalsgaard

    2005-01-01

    statistics and structure response. The study comprises the influence of interest rate, service lifetime, downtime costs and damage accumulation. Design limit states and safety classes for breakwaters are discussed. The results indicate that optimum safety levels are somewhat higher than the safety levels......Optimum design safety levels for rock and cube armoured rubble mound breakwaters without superstructure are investigated by numerical simulations on the basis of minimization of the total costs over the service life of the structure, taking into account typical uncertainties related to wave...

  17. European perspectives of food safety.

    Science.gov (United States)

    Bánáti, Diána

    2014-08-01

    Food safety has been a growing concern among European Union (EU) citizens over the last decades. Despite the fact that food has never been safer, consumers are considerably uncertain and increasingly critical about the safety of their food. The introduction of new principles, such as the primary responsibility of producers, traceability, risk analysis, the separation of risk assessment and risk management provided a more transparent, science-based system in Europe, which can help to restore consumers' lost confidence. The present EU integrated approach to food safety 'from farm to fork' aims to assure a high level of food safety within the EU. © 2014 Society of Chemical Industry.

  18. Safety excavation; Seguranca em escavacoes

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Walter Manoel [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2003-07-01

    In the construction and maintenance services of buried pipelines, the excavation is the activity that contains larger risk, could cause serious accidents. Norms, procedures and technical articles, national and international goods, should be followed for legal and technical aspects. This paper - Safety in Excavations - has purpose to gather all the technical concepts and of safety in a document denominated Procedure of Safety Excavation, serving as instrument to systematize and control the execution of excavation services in construction civil, assembly and pipelines repairs, seeking the people, facilities and the environment's safety. (author)

  19. Laser safety tools and training

    CERN Document Server

    Barat, Ken

    2008-01-01

    Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

  20. Aviation Safety Hotline Information System -

    Data.gov (United States)

    Department of Transportation — The Aviation Safety Hotline Information System (ASHIS) collects, stores, and retrieves reports submitted by pilots, mechanics, cabin crew, passengers, or the public...

  1. FOOD SAFETY AT HOME

    Directory of Open Access Journals (Sweden)

    B. Griglio

    2011-04-01

    Full Text Available Consumers nowadays play a critical role in the prevention of food poisoning. For this reason, the present research was planned to collect data on how aware about food safety consumers are. A questionnaire considering food labelling, hygiene, transport, storage, preparation and kitchen hygiene was designed and submitted to consumers (health district ASL TO5. After questionnaire analysis, a training course was prepared to address specific problems. Kitchens of consentient participants were visited and data on hygiene (check-lists, samples from equipment and fridge surfaces, and fridge temperatures were collected. Questionnaires showed a lack of knowledge on correct food storage, handling, and kitchen hygiene. Households visits showed fridge temperatures above 4°C, highly contaminated washing sponges, and the presence of Listeria spp. in a fridge of a high risk consumer. These results evidence the role of consumer training in reducing foodborne diseases incidence.

  2. Safety of bisphosphonates

    DEFF Research Database (Denmark)

    Pazianas, Michael; Abrahamsen, Bo

    2011-01-01

    and their safety profile has withstood the challenges of the harsh clinical reality and widespread use. Certainly, the esophageal or gastric irritation caused by the oral preparations is an established adverse effect, the risk of which can be reduced by the recommended routine of taking the medication. From...... the other reported associations with adverse events, osteonecrosis of the jaw (ONJ) and subtrochanteric fractures have attracted most of the attention mainly because their pathophysiology remains unclear. However, overall, only a very small proportion of patients treated with bisphosphonates, especially...... with the oral formulations, experience adverse events and the overall benefits have consistently outweighed their potential risks. Furthermore, bisphosphonates improve the quality of life in patients with metastatic bone cancer and delay the development of adverse skeletal effects. This article is part...

  3. Safety training news

    CERN Multimedia

    Safety Training, HSE Unit

    2014-01-01

      SELF-RESCUE MASK The "Self-Rescue Mask" face-to-face training course has been replaced by a revised version. This measure concerns both the initial and the refresher course. For personnel who have successfully attended the initial or refresher Self-Rescue Mask training within the last three years, their Self-Rescue Mask training will still be valid.  The course description and registration form can be found in the training catalogue on the Safety Training Service’s website or catalogue. The Self-Rescue Mask training course is a mandatory prerequisite for following the new "Portable ODH Detector" e-learning course.   PORTABLE ODH DETECTOR A new e-learning awareness course, "Portable ODH Detector", is available via the SIR application on CERN’s intranet. Personnel requiring a portable ODH detector of the DRÄGER x-am 5000 type to allowed access th...

  4. Food safety and ethics

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint; Sandøe, Peter

    2002-01-01

    The general public in Europe seems to have lost its confidence in food safety. The remedy for this, as proposed by the Commission of the EU, is a scientific rearmament. The question, however, is whether more science will be able to overturn the public distrust. Present experience seems to suggest...... the contrary, because there is widespread distrust in the science-based governmental control systems. The answer to this problem is the creation of an independent scientific Food Authority. However, we argue that independent scientific advice alone is unlikely to re-establish public confidence. It is much more...... and risks. Transparency and understanding of the public’s perception of food risks is a necessary first step in establishing the urgently required public dialogue about the complex value questions involved in food production....

  5. Mobility Network and Safety

    Directory of Open Access Journals (Sweden)

    Adriana Galderisi

    2010-04-01

    Full Text Available Mobility network is crucial for ensuring territorial safety with respect to natural and technological hazards. They represent a basic support to community’s everyday life although being exposed elements often characterized by high vulnerability to different hazards and, in the meanwhile, strategic equipments for emergency management. Physical damages or the lack in functioning of those networks may greatly increase the loss of human lives caused by hazardous events as well as produce relevant economic damages at medium and long term. Although the relevance of the mobility networks in assuring territorial safety is at present largely recognized, risk analyses have been long focused on buildings’ vulnerability or, even where they have paid attention to mobility network, they have been mainly focused on the physical damages that a given hazard could may induce on individual elements of such network. It is recent the awareness that mobility network represents a system, characterized by relevant interdependences both among its elements and among network infrastructures and urban systems. Based on these assumptions, this paper points out the heterogeneous aspects of the mobility network vulnerability and their relevance in increasing the overall territorial or urban vulnerability to hazardous events. Therefore, an in-depth investigation of the concept of mobility network vulnerability is provided, in order to highlight the aspects mostly investigated and more recent research perspectives. Finally, a case study in the Campania Region is presented in order to point out how traditional risk analyses, generally referred to individual hazards, can sometimes led to invest in the mobility network improvement or development which, targeted to increase the security of a territory result, on the opposite, in an increase of the territorial vulnerability.

  6. The safety of risk or the risk of safety?

    NARCIS (Netherlands)

    Suddle, S.I.; Waarts, P.H.

    2003-01-01

    Safety is nowadays one of the main items on the agenda during the planning, realisation and management of most large-scale projects, particularly in infrastructure and building projects in intensively used areas such as multiple use of land projects. It is vital that safety aspects are properly

  7. Fundamentals of Electrical Safety. Module SH-03. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on fundamentals of electrical safety is one of 50 modules concerned with job safety and health. This module describes electricity and how it can affect the human body. Following the introduction, nine objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g., Name five common…

  8. Editorial safety science special issue road safety management.

    NARCIS (Netherlands)

    Wegman, F.C.M. & Hagezieker, M.P.

    2014-01-01

    The articles presented in this Special Issue on Road Safety Management represent an illustration of the growing interest in policy-related research in the area of road safety. The complex nature of this type of research combined with the observation that scientific journals pay limited attention to

  9. Safety campaigns. TIS Launches New Safety Information Campaign

    CERN Multimedia

    2001-01-01

    Need to start a new installation and worried about safety aspects? Or are you newly responsible for safety matters in a CERN building? Perhaps you're simply interested in how to make the working environment safer for yourself and your colleagues. Whatever the case, a new information campaign launched by TIS this week can help. The most visible aspects of the new campaign will be posters distributed around the Laboratory treating a different subject each month. The Web site - http://safety.cern.ch/ - which provides all safety related information. But these are not the only aspects of the new campaign. Members of the TIS/GS group, whose contact details can be found on the safety web site, are available to give information and advice on a one-to-one basis at any time. The campaign's launch has been timed to coincide with European Safety Week, organized by the European Agency for Safety and Health at Work and the subject treated in the first posters is safety inspection. This particular topic only concerns thos...

  10. Impact of e-safety applications on cyclists' safety.

    Science.gov (United States)

    Tripodi, Antonino; Persia, Luca

    2015-01-01

    In years to come, urban areas face the challenge of making transport sustainable in terms of environment and competitiveness. Cycling is a perfect transport means in urban areas. Cyclists have a high casualty rate and should be given special attention in road safety policy. Actions to promote cycling in cities should go together with improving road safety. ICT can be used to develop intelligent applications assisting cyclists to avoid, prevent or mitigate accidents. This paper presents the results of activities focused on the assessment of impacts of ICT on the safety of cyclists, realised in the framework of the EU project SAFECYCLE ( www.safecycle.eu ). E-safety applications were identified that can enhance the safety of cyclists in Europe. Eleven applications were analysed in term of benefits and costs. The results highlighted important differences between European countries in term of awareness about cycling, knowledge about ICT applications and also impacts of these applications.

  11. INTEGRATED SAFETY MANAGEMENT SYSTEM SAFETY CULTURE IMPROVEMENT INITIATIVE

    Energy Technology Data Exchange (ETDEWEB)

    MCDONALD JA JR

    2009-01-16

    In 2007, the Department of Energy (DOE) identified safety culture as one of their top Integrated Safety Management System (ISMS) related priorities. A team was formed to address this issue. The team identified a consensus set of safety culture principles, along with implementation practices that could be used by DOE, NNSA, and their contractors. Documented improvement tools were identified and communicated to contractors participating in a year long pilot project. After a year, lessons learned will be collected and a path forward determined. The goal of this effort was to achieve improved safety and mission performance through ISMS continuous improvement. The focus of ISMS improvement was safety culture improvement building on operating experience from similar industries such as the domestic and international commercial nuclear and chemical industry.

  12. Comparing two safety culture surveys: safety attitudes questionnaire and hospital survey on patient safety.

    Science.gov (United States)

    Etchegaray, Jason M; Thomas, Eric J

    2012-06-01

    To examine the reliability and predictive validity of two patient safety culture surveys-Safety Attitudes Questionnaire (SAQ) and Hospital Survey on Patient Safety Culture (HSOPS)-when administered to the same participants. Also to determine the ability to convert HSOPS scores to SAQ scores. Employees working in intensive care units in 12 hospitals within a large hospital system in the southern United States were invited to anonymously complete both safety culture surveys electronically. All safety culture dimensions from both surveys (with the exception of HSOPS's Staffing) had adequate levels of reliability. Three of HSOPS's outcomes-frequency of event reporting, overall perceptions of patient safety, and overall patient safety grade-were significantly correlated with SAQ and HSOPS dimensions of culture at the individual level, with correlations ranging from r=0.41 to 0.65 for the SAQ dimensions and from r=0.22 to 0.72 for the HSOPS dimensions. Neither the SAQ dimensions nor the HSOPS dimensions predicted the fourth HSOPS outcome-number of events reported within the last 12 months. Regression analyses indicated that HSOPS safety culture dimensions were the best predictors of frequency of event reporting and overall perceptions of patient safety while SAQ and HSOPS dimensions both predicted patient safety grade. Unit-level analyses were not conducted because indices did not indicate that aggregation was appropriate. Scores were converted between the surveys, although much variance remained unexplained. Given that the SAQ and HSOPS had similar reliability and predictive validity, investigators and quality and safety leaders should consider survey length, content, sensitivity to change and the ability to benchmark when selecting a patient safety culture survey.

  13. Geodesign the multilayered water safety

    NARCIS (Netherlands)

    Sophronides, Panayiotis; Steenbruggen, John; Scholten, Henk J.; Giaoutzi, Maria

    2016-01-01

    This paper aims to frame the multi-layered water safety concept in the context of a systematic, thorough, multidisciplinary and collaborative methodology for complex problems solving, i.e. geodesign. Multi-layered safety is an integrated flood risk management (FRM) concept based not only on flood

  14. Critical Areas in Sports Safety.

    Science.gov (United States)

    Morehouse, C. A., Ed.; And Others

    1983-01-01

    Four articles examine important aspects of sport safety. Topics include: (1) risks of eye injuries in racquet sports and preventive measures; (2) ways to reduce gymnastics injuries; (3) safety in training areas; and (4) risk-management strategies to avoid legal liability. Guidelines for teachers are given. (PP)

  15. Introduction to Preharvest Food Safety.

    Science.gov (United States)

    Torrence, Mary E

    2016-10-01

    This introductory article provides an overview of preharvest food safety activities and initiatives for the past 15 years. The section on traditional areas of preharvest food safety focuses on significant scientific advancements that are a culmination of collaborative efforts (both public health and agriculture) and significant research results. The highlighted advancements provide the foundation for exploring future preharvest areas and for improving and focusing on more specific intervention/control/prevention strategies. Examples include Escherichia coli and cattle, Salmonella and Campylobacter in poultry, and interventions and prevention and control programs. The section on "nontraditional" preharvest food safety areas brings attention to potential emerging food safety issues and to future food safety research directions. These include organic production, the FDA's Produce Rule (water and manure), genomic sequencing, antimicrobial resistance, and performance metrics. The concluding section emphasizes important themes such as strategic planning, coordination, epidemiology, and the need for understanding food safety production as a continuum. Food safety research, whether at the pre- or postharvest level, will continue to be a fascinating complex web of foodborne pathogens, risk factors, and scientific and policy interactions. Food safety priorities and research must continue to evolve with emerging global issues, emerging technologies, and methods but remain grounded in a multidisciplinary, collaborative, and systematic approach.

  16. Radiation Safety Aspects of Nanotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, David; Cash, Leigh Jackson [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Guilmette, Raymond [Ray Guilmette & Associates, LLC, Perry, ME (United States); Kreyling, Wolfgang [Helmholtz-Zentrum Munchen, (Germany); Oberdorster, Gunter [Univ. of Rochester, NY (United States); Smith, Rachel [Public Health England, Oxfordshire (United Kingdom). Centre for Radiation, Chemical and Environmental Hazards

    2017-03-27

    This Report is intended primarily for operational health physicists, radiation safety officers, and internal dosimetrists who are responsible for establishing and implementing radiation safety programs involving radioactive nanomaterials. It should also provide useful information for workers, managers and regulators who are either working directly with or have other responsibilities related to work with radioactive nanomaterials.

  17. Safety at Work : Research Methodology

    NARCIS (Netherlands)

    Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

    2012-01-01

    In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

  18. Compositional Synthesis of Safety Controllers

    NARCIS (Netherlands)

    Kuijper, W.

    2012-01-01

    In my thesis I investigate compositional techniques for synthesis of safety controllers. A safety controller, in this context, is a state machine that gives the set of safe control outputs for every possible sequence of observations from the plant under control. Compositionality, in this context,

  19. Medical Device Safety - Multiple Languages

    Science.gov (United States)

    ... Are Here: Home → Multiple Languages → All Health Topics → Medical Device Safety URL of this page: https://medlineplus.gov/languages/ ... V W XYZ List of All Topics All Medical Device Safety - Multiple Languages To use the sharing features on ...

  20. Asymptotic Safety, Fractals, and Cosmology

    Science.gov (United States)

    Reuter, Martin; Saueressig, Frank

    These lecture notes introduce the basic ideas of the asymptotic safety approach to quantum Einstein gravity (QEG). In particular they provide the background for recent work on the possibly multi-fractal structure of the QEG space-times. Implications of asymptotic safety for the cosmology of the early Universe are also discussed.

  1. Safety effects of traffic restraint.

    NARCIS (Netherlands)

    Janssen, S.T.M.C.

    1986-01-01

    In recent years the effectiveness and acceptability of traffic restraint measures in residential areas has been investigated. Results of accident investigations indicate that a new layout of residential areas has a positive effect on traffic safety. Research into road safety should not be restricted

  2. Regulatory Expectations for Safety Culture

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Su Jin; Oh, Jang Jin; Choi, Young Sung [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-05-15

    The oversight of licensee's safety culture becomes an important issue that attracts great public and political concerns recently in Korea. Beginning from the intended violation of rules, a series of corruptions, documents forgery and disclosure of wrong-doings made the public think that the whole mindset of nuclear workers has been inadequate. Thus, they are demanding that safety culture shall be improved and that regulatory body shall play more roles and responsibilities for the improvements and oversight for them. This paper introduces, as an effort of regulatory side, recent changes in the role of regulators in safety culture, regulatory expectations on the desired status of licensee's safety culture, the pilot inspection program for safety culture and research activity for the development of oversight system. After the Fukushima accident in Japan 2011, many critics has searched for cultural factors that caused the unacceptable negligence pervaded in Japan nuclear society and the renewed emphasis has been placed on rebuilding safety culture by operators, regulators, and relevant institutions globally. Significant progress has been made in how to approach safety culture and led to a new perspective different from the existing normative assessment method both in operators and regulatory side. Regulatory expectations and oversight of them are based on such a new holistic concept for human, organizational and cultural elements to maintain and strengthen the integrity of defense in depth and consequently nuclear safety.

  3. An Education in Electrical Safety.

    Science.gov (United States)

    McBride, John W.; Chiappetta, Eugene L.

    1992-01-01

    Discusses teaching electrical safety guidelines in the process of teaching the concepts related to electricity. Discusses household current; electrical insulation; and examples of electrical safety in the home related to appliances, the bathroom, the yard and the neighborhood. (10 references) (MDH)

  4. Balancing Safety and Free Speech

    Science.gov (United States)

    Hudson, David L., Jr.

    2004-01-01

    According to Jay Worona, general counsel for the New York State School Board Association, "Balancing safety and student constitutional rights is not easy. It has to be a careful balance. School officials must be prudent and not overreact. But one part of the equation has to be paramount. And safety should be the primary concern"…

  5. Safety of hydrogen pressure gauges.

    Science.gov (United States)

    Voth, R. O.

    1972-01-01

    Study of the relative safety afforded an operator by various hydrogen-pressure gauge case designs. It is shown that assurance of personnel safety, should a failure occur, requires careful selection of available gauge designs, together with proper mounting. Specific gauge case features and mounting requirements are recommended.

  6. IMPORTANCE OF SAFETY CULTURE ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    Spitalnik, J.

    2004-10-06

    Safety Management has lately been considered by some Nuclear Regulatory agencies as the tool on which to concentrate their efforts to implement modern regulation structures, because Safety Culture was said to be difficult to monitor. However, Safety Culture can be assessed and monitored even if it is problematical to make Safety Culture the object of regulation. This paper stresses the feasibility and importance of Safety Culture Assessment based on self-assessment applications performed in several nuclear organizations in Latin America. Reasons and ownership for assessing Safety Culture are discussed, and relevant aspects considered for setting up and programming such an assessment are shown. Basic principles that were taken into account, as well as financial and human resources used in actual self-assessments are reviewed, including the importance of adequate statistical analyses and the necessity of proper feed-back of results. The setting up of action plans to enhance Safety Culture is the final step of the assessment program that once implemented will enable to establish a Safety Culture monitoring process within the organization.

  7. Developing patient safety in dentistry.

    Science.gov (United States)

    Pemberton, M N

    2014-10-01

    Patient safety has always been important and is a source of public concern. Recent high profile scandals and subsequent reports, such as the Francis report into the failings at Mid Staffordshire, have raised those concerns even higher. Mortality and significant morbidity associated with the practice of medicine has led to many strategies to help improve patient safety, however, with its lack of associated mortality and lower associated morbidity, dentistry has been slower at systematically considering how patient safety can be improved. Recently, several organisations, researchers and clinicians have discussed the need for a patient safety culture in dentistry. Strategies are available to help improve patient safety in healthcare and deserve further consideration in dentistry.

  8. Air Operators’ Safety Assurance System

    Directory of Open Access Journals (Sweden)

    Xie Zhi-Hui

    2017-01-01

    Full Text Available Construction of air operators’ safety assurance system is important for national civil aviation authority to perform the safety oversight work systematically and efficiently on the air operators. The system is a combination of management process, tools, information platform, which utilize system configuration model and data collection tools to accomplish the air operator system design evaluation and performance evaluation, and output the advice for national civil aviation authority inspectors to take action to improve the air operators’ safety design and performance according to the regulation. Process has been designed to realize design and performance evaluation, and strengthen the safety assurance function during the air operator certification and surveillance phases. Based on the system configuration model, risk indicators, data collection tools and other tools, the system could perform configuration setting, planning, task assignment, data collection, analysis and action during the certification and surveillance. The application of the safety assurance system to different operators has been considered.

  9. Health, Safety, and Environment Division

    Energy Technology Data Exchange (ETDEWEB)

    Wade, C [comp.

    1992-01-01

    The primary responsibility of the Health, Safety, and Environmental (HSE) Division at the Los Alamos National Laboratory is to provide comprehensive occupational health and safety programs, waste processing, and environmental protection. These activities are designed to protect the worker, the public, and the environment. Meeting these responsibilities requires expertise in many disciplines, including radiation protection, industrial hygiene, safety, occupational medicine, environmental science and engineering, analytical chemistry, epidemiology, and waste management. New and challenging health, safety, and environmental problems occasionally arise from the diverse research and development work of the Laboratory, and research programs in HSE Division often stem from these applied needs. These programs continue but are also extended, as needed, to study specific problems for the Department of Energy. The results of these programs help develop better practices in occupational health and safety, radiation protection, and environmental science.

  10. Food safety and organic meats.

    Science.gov (United States)

    Van Loo, Ellen J; Alali, Walid; Ricke, Steven C

    2012-01-01

    The organic meat industry in the United States has grown substantially in the past decade in response to consumer demand for nonconventionally produced products. Consumers are often not aware that the United States Department of Agriculture (USDA) organic standards are based only on the methods used for production and processing of the product and not on the product's safety. Food safety hazards associated with organic meats remain unclear because of the limited research conducted to determine the safety of organic meat from farm-to-fork. The objective of this review is to provide an overview of the published results on the microbiological safety of organic meats. In addition, antimicrobial resistance of microbes in organic food animal production is addressed. Determining the food safety risks associated with organic meat production requires systematic longitudinal studies that quantify the risks of microbial and nonmicrobial hazards from farm-to-fork.

  11. Patient Safety and Organizational Learning

    DEFF Research Database (Denmark)

    Zinck Pedersen, Kirstine

    The key trope of patient safety policy is learning. With the motto of going from ‘a culture of blame to a learning culture’, the safety program introduces a ‘systemic perspective’ to facilitate openness and willingness to talk about failures, hereby making failures into a system property. Within...... the mainstream safety orthodoxy the system is understood as a static and well-defined entity and the primary ‘learning model’ is to ‘fix the system’ by introducing standards, procedures and safety devices. The goal is to create a system as independent of experience and memory as possible. Drawing upon American...... pragmatism, situated learning theory and science and technology studies, the paper contrasts the notion of ‘systemic’ learning expressed by the safety policy program with notions of learning as a socio-materially situated practice. Based on fieldwork conducted in 2010 in a Danish university hospital, I...

  12. Sustainable Development of Food Safety

    DEFF Research Database (Denmark)

    Fabech, B.; Georgsson, F.; Gry, Jørn

    to food safety - Strengthen efforts against zoonoses and pathogenic microorganisms - Strengthen safe food handling and food production in industry and with consumers - Restrict the occurrence of chemical contaminants and ensure that only well-examined production aids, food additives and flavours are used...... - Strengthen scientific knowledge of food safety - Strengthen consumer knowledge The goals for sustainable development of food safety are listed from farm to fork". All of the steps and areas are important for food safety and consumer protection. Initiatives are needed in all areas. Many of the goals...... in other areas. It should be emphasized that an indicator will be an excellent tool to assess the efficacy of initiatives started to achieve a goal. Conclusions from the project are: - Sustainable development in food safety is important for humanity - Focus on the crucial goals would optimize the efforts...

  13. [Safety culture: definition, models and design].

    Science.gov (United States)

    Pfaff, Holger; Hammer, Antje; Ernstmann, Nicole; Kowalski, Christoph; Ommen, Oliver

    2009-01-01

    Safety culture is a multi-dimensional phenomenon. Safety culture of a healthcare organization is high if it has a common stock in knowledge, values and symbols in regard to patients' safety. The article intends to define safety culture in the first step and, in the second step, demonstrate the effects of safety culture. We present the model of safety behaviour and show how safety culture can affect behaviour and produce safe behaviour. In the third step we will look at the causes of safety culture and present the safety-culture-model. The main hypothesis of this model is that the safety culture of a healthcare organization strongly depends on its communication culture and its social capital. Finally, we will investigate how the safety culture of a healthcare organization can be improved. Based on the safety culture model six measures to improve safety culture will be presented.

  14. Safety Training: Basic safety courses available everyday in building 55

    CERN Multimedia

    2005-01-01

    One month ago, SC launched the new organization for basic safety courses. A video lasting 50 minutes runs daily at 14.00 and 15.00 in the registration building. The first session started on 13 October. For your information, since the video was first shown, 260 people have attended the English basic safety course. This means an average of 60 people per week. SC would like to thank the Departments who permitted this project to reach its goal, and particularly IT, TS and FI. The French version of this course will run daily from 30 November , at 9:00 am and at 10:00 am. SC would like to thank you all in advance for contributing to change the old habits of the past organization by encouraging people you work with to follow the safety courses upon arrival, and not only on Tuesdays. For more information, please go to the following link: http://safety-commission.web.cern.ch/safety-commission/SC-site/sc_pages/training/basic.html FORMATION EN SECURITE SAFETY TRAINING safety.training@cern.ch

  15. Safety culture: the Nottingham Veterinary Safety Culture Survey (NVSCS).

    Science.gov (United States)

    Oxtoby, C; Mossop, L; White, K; Ferguson, E

    2017-05-13

    Safety culture is a vital concept in human healthcare because of its influence on staff behaviours in relation to patient safety. Understanding safety culture is essential to ensure the acceptance and sustainability of changes, such as the introduction of safe surgery checklists. While widely studied and assessed in human medicine, there is no tool for its assessment in veterinary medicine. This paper therefore presents initial data on such an assessment: the Nottingham Veterinary Safety Culture Survey (NVSCS). 350 pilot surveys were distributed to practising vets and nurses. The survey was also available online. 229 surveys were returned (65 per cent response rate) and 183 completed online, resulting in 412 surveys for analysis. Four domains were identified: (1) organisational safety systems and behaviours, (2) staff perceptions of management, (3) risk perceptions and (4) teamwork and communication. Initial indications of the reliability and the validity of the final survey are presented. Although early in development, the resulting 29-item NVSCS is presented as a tool for measuring safety culture in veterinary practices with implications for benchmarking, safety culture assessment and teamwork training. British Veterinary Association.

  16. Future testing of active safety systems

    NARCIS (Netherlands)

    Hendriks, F.M.; Pelders, H.A.A.W.

    2010-01-01

    Active safety systems are increasingly becoming available in trucks and passenger vehicles. Developments in the field of active safety are shifting from increasing driver comfort towards increasing occupant safety. Furthermore, this shift is seen within active safety systems: safety functions are

  17. 14 CFR 1260.37 - Safety.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

  18. Magnetic safety matches

    Science.gov (United States)

    Lindén, J.; Lindberg, M.; Greggas, A.; Jylhävuori, N.; Norrgrann, H.; Lill, J. O.

    2017-07-01

    In addition to the main ingredients; sulfur, potassium chlorate and carbon, ordinary safety matches contain various dyes, glues etc, giving the head of the match an even texture and appealing color. Among the common reddish-brown matches there are several types, which after ignition can be attracted by a strong magnet. Before ignition the match head is generally not attracted by the magnet. An elemental analysis based on proton-induced x-ray emission was performed to single out iron as the element responsible for the observed magnetism. 57Fe Mössbauer spectroscopy was used for identifying the various types of iron-compounds, present before and after ignition, responsible for the macroscopic magnetism: Fe2O3 before and Fe3O4 after. The reaction was verified by mixing the main chemicals in the match-head with Fe2O3 in glue and mounting the mixture on a match stick. The ash residue after igniting the mixture was magnetic.

  19. Reactor Safety Research Programs

    Energy Technology Data Exchange (ETDEWEB)

    Edler, S. K.

    1981-07-01

    This document summarizes the work performed by Pacific Northwest Laboratory (PNL) from January 1 through March 31, 1981, for the Division of Reactor Safety Research within the U.S. Nuclear Regulatory Commission (NRC). Evaluations of nondestructive examination (NDE) techniques and instrumentation are reported; areas of investigation include demonstrating the feasibility of determining the strength of structural graphite, evaluating the feasibility of detecting and analyzing flaw growth in reactor pressure boundary systems, examining NDE reliability and probabilistic fracture mechanics, and assessing the integrity of pressurized water reactor (PWR) steam generator tubes where service-induced degradation has been indicated. Experimental data and analytical models are being provided to aid in decision-making regarding pipeto- pipe impacts following postulated breaks in high-energy fluid system piping. Core thermal models are being developed to provide better digital codes to compute the behavior of full-scale reactor systems under postulated accident conditions. Fuel assemblies and analytical support are being provided for experimental programs at other facilities. These programs include loss-ofcoolant accident (LOCA) simulation tests at the NRU reactor, Chalk River, Canada; fuel rod deformation, severe fuel damage, and postaccident coolability tests for the ESSOR reactor Super Sara Test Program, Ispra, Italy; the instrumented fuel assembly irradiation program at Halden, Norway; and experimental programs at the Power Burst Facility, Idaho National Engineering Laboratory (INEL). These programs will provide data for computer modeling of reactor system and fuel performance during various abnormal operating conditions.

  20. Chemical safety problems

    Directory of Open Access Journals (Sweden)

    Valery S. Petrosyan

    2012-06-01

    Full Text Available A situation of chemical safety is reached when the effects of organic, inorganic and organometallic toxic substances enable people to maintain good health and to preserve the biodiversity of ecosystems. After establishing that many compounds which contaminate the environment  produce adverse toxic effects on humans and ecotoxic effects on the biota, numerous efforts have been undertaken both nationally and internationally to reduce and/or eliminate emissions and the discharge of toxic substances (PTS, including POPs. Terrestrial chemical sputniks are compounds that enter the atmosphere through various anthropic sources and travel varying distances on the Earth before being deposited in the different regions of our planet via rain and snow. The emission of  toxic materials produced in any one nation will firstly contaminate the country itself, then spread to neighbouring countries and  will finally affect countries further afield. Observation on a global scale has shown that the temperature gradient of the environment, combined with a favourable atmospheric situation, gradually moves from hot to cold regions leading to “polar distillation”, in other words a continuously increasing concentration of compounds in polar  areas and high altitude regions. Chemical Boomerangs are those compounds introduced by people into their lives to carry out specific tasks ( for exemple, pesticides, paints, coal, solvents, petroleum.

  1. New safety course!

    CERN Multimedia

    DG Unit

    2009-01-01

    Do you need to know how to use the portable breathing apparatus ("Biocell") in order to work at CERN? If so, you will need to sign up for a new course on how to use this personal protection system. The training starts with a refresher on how the Biocell works. You will then have an opportunity to use a training unit in realistic conditions simulating a tunnel incident: darkness, non-toxic smoke, the noise of a gas leak, an audible alarm to signal oxygen deficiency, and flashing hazard lights. Once you have participated in this 90-minute training session (in French or English), you will know how to use your Biocell in the event of an emergency. In the near future, completion of the course will be made mandatory in order to obtain access rights for the LHC and SPS tunnels. Register for the Biocell course through the Safety training catalogue at: http://cta.cern.ch/cta2/f?p=110:9:4262544393185446::NO::X_LANGUAGE...

  2. Safety during MARS exercise

    CERN Multimedia

    2015-01-01

    It is MARS(1) time again! All employed members of the CERN personnel are currently undergoing the annual MARS evaluations.   This is also a good occasion for supervisors and their supervisees to fill in or update the OHS-0-0-3 form(2) “Identification of occupational hazards”. Filling in the OHS-0-0-3 form is an opportunity to assess any safety issues related to the supervisee's activities.  Each of us should, together with our supervisor, regularly identify and assess the hazards we may be exposed to in the course of our professional activities and reflect on how to control and mitigate them. When filling in the OHS form for the first time, it is important to determine any potential hazards as well as the corresponding preventive measures, in particular training and protective equipment. When updating the form, please review the available information to ensure that it still corresponds to the current activities. The form should be updated w...

  3. Food safety performance indicators to benchmark food safety output of food safety management systems

    NARCIS (Netherlands)

    Jacxsens, L.; Uyttendaele, M.; Devlieghere, F.; Rovira, J.; Oses Gomez, S.; Luning, P.A.

    2010-01-01

    There is a need to measure the food safety performance in the agri-food chain without performing actual microbiological analysis. A food safety performance diagnosis, based on seven indicators and corresponding assessment grids have been developed and validated in nine European food businesses.

  4. 76 FR 71345 - Patient Safety Organizations: Voluntary Relinquishment From Emergency Medicine Patient Safety...

    Science.gov (United States)

    2011-11-17

    ... HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary Relinquishment From Emergency Medicine Patient Safety Foundation AGENCY: Agency for Healthcare Research and... relinquishment from Emergency Medicine Patient Safety Foundation of its status as a Patient Safety Organization...

  5. 76 FR 72888 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2011-11-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration...

  6. Economic Issues on Food Safety.

    Science.gov (United States)

    Adinolfi, Felice; Di Pasquale, Jorgelina; Capitanio, Fabian

    2016-01-18

    A globalised food trade, with a huge increase of the exchanged volume, extensive production and complex supply chains are contributing towards an increased number of microbiological food safety outbreaks. All of these factors are putting pressure on the stakeholders, either public or private, in terms of rule and control. In fact, this scenario could force manufacturers to be lenient towards food safety control intentionally, or unintentionally, and result in a major foodborne outbreak that causes health problems and economic loss. As a response to emerging calls for the adoption of a systemic approach to food safety, we try to identify and discuss the several related economics issue in this field. Based on an extensive analysis of academic and policy literatures on the economic effects of global environmental change at different stages of the food system, we highlight the main issues involving economists in the field of food safety. In the first part, we assessed the several approaches and problems related to the evaluation of food safety improvements, followed by an overview of drivers of food safety demand in the second part. The third section is devoted to discussing changes occurred at the institutional level in building and managing food safety policies. The last section summarises the main considerations aroused from the work.

  7. Economic issues on food safety

    Directory of Open Access Journals (Sweden)

    Felice Adinolfi

    2016-03-01

    Full Text Available A globalised food trade, with a huge increase of the exchanged volume, extensive production and complex supply chains are contributing towards an increased number of microbiological food safety outbreaks. All of these factors are putting pressure on the stakeholders, either public or private, in terms of rule and control. In fact, this scenario could force manufacturers to be lenient towards food safety control intentionally, or unintentionally, and result in a major foodborne outbreak that causes health problems and economic loss. As a response to emerging calls for the adoption of a systemic approach to food safety, we try to identify and discuss the several related economics issue in this field. Based on an extensive analysis of academic and policy literatures on the economic effects of global environmental change at different stages of the food system, we highlight the main issues involving economists in the field of food safety. In the first part, we assessed the several approaches and problems related to the evaluation of food safety improvements, followed by an overview of drivers of food safety demand in the second part. The third section is devoted to discussing changes occurred at the institutional level in building and managing food safety policies. The last section summarises the main considerations aroused from the work.

  8. Aviation Safety: FAA and DOD Response to Similar Safety Concerns

    National Research Council Canada - National Science Library

    2002-01-01

    .... The Federal Aviation Administration (FAA) and the military services often face common safety issues as they oversee the operation of similar aircraft or even dissimilar aircraft that use common parts and materials...

  9. Safety and business benefit analysis of NASA's aviation safety program

    Science.gov (United States)

    2004-09-20

    NASA Aviation Safety Program elements encompass a wide range of products that require both public and private investment. Therefore, two methods of analysis, one relating to the public and the other to the private industry, must be combined to unders...

  10. Online Safety: Fraud, Security, Phishing, Vishing

    Science.gov (United States)

    ... Report Scams and Frauds Identity Theft Online Safety Privacy Online Safety Be aware of these scams when you're online. What's on This Page Online Security and Safety Internet Fraud Phishing and Vishing Online ...

  11. CDC Vital Signs: Recipe for Food Safety

    Science.gov (United States)

    ... MB] Read the MMWR Science Clips Recipe for Food Safety Protecting people from deadly Listeria food poisoning Recommend ... environmental investigations, to make food safer. Applying new safety measures for food production, like those included in the Food Safety ...

  12. Safety Climate of Commercial Vehicle Operation

    Science.gov (United States)

    2010-03-01

    Enhancing the safety culture within trucking and motor coach industries has become a key area of concern given the potential impact it has on crashes and overall safety. Many organizations recognize that safety is compromised if the culture within th...

  13. Food Safety for Pregnant and Breastfeeding Women

    Science.gov (United States)

    ... Waste Food Safety Newsroom Dietary Guidelines Communicator’s Guide Food Safety You are here Home / Audience / Adults / Moms/ ... and raw sprouts. Do not eat these foods. Food safety advice when you are pregnant Follow the ...

  14. Communication from the Safety Service

    CERN Multimedia

    DG Unit - General Safety

    In any emergency, you should call 74444 (+41 22 76 74444). There is something that bears repeating - especially in the light of recent events. The new Safety Bulletin, No. 2009-01, reminds us that, although raising the alarm and giving first aid in an emergency are everyone’s job, “medical transport is a job for professionals.” You are urged to read, print and share the Safety Bulletin No. 2009-01: remember for all emergencies you should dial 74444! We appreciate your comments and suggestions. Write to safety-general@cern.ch.

  15. [Transfusion safety and haemovigilance committees].

    Science.gov (United States)

    Quaranta, J-F; Canivet, N; Courbil, R; Raucoules-Aimé, M

    2007-05-01

    Transfusion safety and haemovigilance committees (TSHC) were initially created in the public health care sector. Nowadays, they are also a mandatory committee of private health care institutions. The members of the TSHC, as well as the way the committee is driven and organized, are defined by law. The aim of the committee is focused on the management of transfusion safety and haemovigilance. The TSHC takes part in the improvement of the safety of transfused patients, and monitors the applying of haemovigilance rules. It also handles the training of all staff members involved in the blood transfusion process.

  16. Safety Bulletin 2014-2

    CERN Multimedia

    HSE Unit

    2014-01-01

    The HSE Unit would like to inform you that the Safety Bulletin 2014-2 entitled “False floors: real dangers” has just been released.     The Bulletin is available on EDMS under the following number: 1366385. We would like to remind you that HSE Safety Bulletins are published in English and French and incorporate feedback from incidents/near misses/accidents that have occurred on the CERN site, with the aim of improving prevention. We remain at your disposal in case you have further questions: safety.bulletin@cern.ch.

  17. [Supervising road safety in Peru].

    Science.gov (United States)

    Sagástegui, Freddy

    2010-06-01

    In this article some problems in road safety are described, which have been detected by the Ombudsman of Peru, as part of its role of public administration supervisor, amongst these problems we mention: lack of and inadequate elaboration of the statistics on road traffic accidents, the inconsistency of the National Council for Road Security and the lack of responsibility of the local and regional governments reflected by the lack of application of the National Plan of Road Safety. Facing this, the Ombudsman suggests that the State develops a rigorous statistical system, strengthens the National Council of Road Safety and that the different sectors of the government develop the mentioned National Plan.

  18. Supply chain management - safety aspects

    Directory of Open Access Journals (Sweden)

    2010-12-01

    Full Text Available Developing economy, growing customer requirements and competition make the service level higher. Delivery safety - as the highest priority - has to be maintained at the same time. Customers more and more often require transport to be very flexible, fast, and complex in terms of carrying every quantity of goods of different sizes, from and to different countries, through customs clearance, storing and distribution of shipments. Meeting these requirements depends on complex information on transport processes and their safety. The article presents safety foundations and institution Authorized Economic Operator - AEO in supply chains.

  19. Urban Spaces and Safety

    Directory of Open Access Journals (Sweden)

    Rosa Grazia De Paoli

    2012-11-01

    Full Text Available The concept of vulnerability understood in the traditional sense as a “single manufactured good” is insufficient when it comes to describing the real conditions of an urban system’s vulnerability within which an indefinite variable of factors interact with one another thereby determining the damage caused by an earthquake. These interacting factors constitute so-called “urban vulnerability” which town planners use in order to contribute to the field in the form of analysis definition and interventions in the mitigation of seismic risk on an urban scale. The research paper “Relational Spaces as Safe Places” positions itself firmly in the vein of town planning research which focuses on the mitigation of seismic risk, and which intends to blaze a new methodological trail that aims to identify safety traits in urban spaces. The research paper’s starting point is the assumption that empty urban spaces, given the indications provided by the principal organs for Civic Protection, have come to be seen as the spaces designed to accommodate the public in cases of emergency. This can generate new thought regarding town planning by reviewing early post-earthquake urban designs where the rules were laid out for earthquake-proof cities: a “chessboard” plan with wide streets, both straight and perpendicular, empty spaces like squares and markets positioned along the longitudinal streets, and buildings with regular layouts all at right-angles. These simple guidelines, which are often disregarded and distorted in modern towns, are extraordinarily relevant and oriented towards new definitions of the urban traits of quality and security.

  20. [Angiography: safety x economy].

    Science.gov (United States)

    Torres, Rogil José de Almeida; Muccioli, Cristina; Casella, Antonio Marcelo Barbante; Regonha, Eduardo; Luchini, Andréa; Weiss, Wilma; Frecceiro, Paulo Roberto

    2006-01-01

    To evaluate the safety, effectiveness, and cost of angiofluoresceinographic examination by using both the least amount of dye as well as digital equipment along with a laser photocopier. Prospective and comparative study carried out in a group of 70 patients, who underwent an angiographic evaluation with a conventional retinographer injecting 5 ml sodium fluorescein at 10% (control group) as well as a group of 70 patients who underwent an angiographic evaluation with a digital retinographer injecting 2 ml fluorescein at 10% (study group). Arterial pressure, heart rate and oximetry were assessed prior to and after the dye injection. Organic reactions related to the examination were reported. Photograph quality as well as cost between the two techniques were compared. Control group patients showed a greater increase in systolic and diastolic arterial pressure. Heart rate, oximetry measurement and adverse reactions did not show any significant statistical differences between both groups. As for the quality of photographs, a better performance was noticed in the control group. As for the cost, the examination carried out in the study group required lower cost and thus saved around 54.8% per examination in relation to the control group. The examination carried out with a lower dose of fluorescein using digital equipment along with a laser photocopier provided greater stability in the systolic and diastolic arterial pressure. However, it did not have any influence on heart rate, oximetry or adverse reactions such as nausea, vomiting, syncope and rashes. The quality of photographs was poor although they enabled diagnosis as well as therapy follow-up for those who carried out the examination. Moreover, economically the above procedure represented a gain of 66.26%, against 25.81% in relation to the conventional equipment.

  1. 10 CFR 70.62 - Safety program and integrated safety analysis.

    Science.gov (United States)

    2010-01-01

    ... to the technology of the process, and information pertaining to the equipment in the process. (c... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process... this safety program; namely, process safety information, integrated safety analysis, and management...

  2. Promoting a Culture of Safety as a Patient Safety Strategy

    Science.gov (United States)

    Weaver, Sallie J.; Lubomksi, Lisa H.; Wilson, Renee F.; Pfoh, Elizabeth R.; Martinez, Kathryn A.; Dy, Sydney M.

    2015-01-01

    Developing a culture of safety is a core element of many efforts to improve patient safety and care quality. This systematic review identifies and assesses interventions used to promote safety culture or climate in acute care settings. The authors searched MEDLINE, CINAHL, PsycINFO, Cochrane, and EMBASE to identify relevant English-language studies published from January 2000 to October 2012. They selected studies that targeted health care workers practicing in inpatient settings and included data about change in patient safety culture or climate after a targeted intervention. Two raters independently screened 3679 abstracts (which yielded 33 eligible studies in 35 articles), extracted study data, and rated study quality and strength of evidence. Eight studies included executive walk rounds or interdisciplinary rounds; 8 evaluated multicomponent, unit-based interventions; and 20 included team training or communication initiatives. Twenty-nine studies reported some improvement in safety culture or patient outcomes, but measured outcomes were highly heterogeneous. Strength of evidence was low, and most studies were pre–post evaluations of low to moderate quality. Within these limits, evidence suggests that interventions can improve perceptions of safety culture and potentially reduce patient harm. PMID:23460092

  3. TIS General Safety Group Annual Report 2000

    CERN Document Server

    Weingarten, W

    2001-01-01

    This report summarises the main activities of the General Safety (GS) Group of the Technical Inspection and Safety Division (TIS) during the year 2000, and the results obtained. The different topics in which the Group is active are covered: general safety inspections and ergonomy, electrical, chemistry and gas safety, chemical pollution containment and control, industrial hygiene, the safety of civil engineering works and outside contractors, fire prevention and the safety aspects of the LHC experiments.

  4. Safety and security profiles of industry networks used in safety- critical applications

    Directory of Open Access Journals (Sweden)

    Mária FRANEKOVÁ

    2008-01-01

    Full Text Available The author describes the mechanisms of safety and security profiles of industry and communication networks used within safety – related applications in technological and information levels of process control recommended according to standards IEC 61784-3,4. Nowadays the number of vendors of the safety – related communication technologies who guarantees besides the standard communication, the communication amongst the safety – related equipment according to IEC 61508 is increasing. Also the number of safety – related products is increasing, e. g. safety Fieldbus, safety PLC, safety curtains, safety laser scanners, safety buttons, safety relays and other. According to world survey the safety Fieldbus denoted the highest growth from all manufactured safety products.The main part of this paper is the description of the safety-related Fieldbus communication system, which has to guaranty Safety Integrity Level.

  5. Progress of nuclear safety research. 2001

    Energy Technology Data Exchange (ETDEWEB)

    Anoda, Yoshinari; Sasajima, Hideo; Nishiyama, Yutaka (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    2001-10-01

    JAERI is conducting nuclear safety research primarily at the Nuclear Safety Research Center in close cooperation with the related departments in accordance with the Long Term Plan for Development and Utilization of Nuclear Energy or the Safety Research Annual Plan issued by the Japanese government. The safety research at JAERI concerns the engineering safety of nuclear power plants and nuclear fuel cycle facilities, and radioactive waste management as well as advanced technology for safety improvement or assessment. Also, JAERI has conducted international collaboration to share the information on common global issues of nuclear safety. This report summarizes the nuclear safety research activities of JAERI from April 1999 through March 2001. (author)

  6. Safety valve for offshore borehole

    Energy Technology Data Exchange (ETDEWEB)

    McGill, H.L.; Randermann, E. Jr.; Musik, O.J.

    1977-10-06

    The invention concerns a new and improved submarine safety valve with a valve element which rotate, which can be used, in emergencies, to separate the wound-up piping which extends into the borehole and to close the production line.

  7. Facts about Hospital Worker Safety

    Science.gov (United States)

    ... and Worker Safety: Opportunities for Synergy, Collaboration, and Innovation . 5 Bureau of Labor Statistics. Case and Demographic ... Shea, and M. Martinez. 2009. The lift team’s importance to a successful safe patient handling program. Journal ...

  8. Magnetic Resonance Imaging (MRI) Safety

    Science.gov (United States)

    ... News Physician Resources Professions Site Index A-Z Magnetic Resonance Imaging (MRI) Safety What is MRI and how does it ... and MRI Breast-feeding and MRI What is MRI and how does it work? Magnetic resonance imaging, ...

  9. Insurance Discounts: Traffic Safety Tips

    Science.gov (United States)

    1996-01-01

    This fact sheet, NHTSA Facts: Summer 1996, discusses automobile insurance discounts. It relates how to obtain a discount, and details what factors can influence insurance premiums. It notes that discounts for safety features vary from insurance compa...

  10. Safety and Health Topics: Asbestos

    Science.gov (United States)

    ... Videos E-Tools Safety and Health Topics / Asbestos Asbestos This page requires that javascript be enabled for ... Hazards and Toxic Substances Hazardous Waste What is asbestos? Asbestos is the name given to a group ...

  11. Nuclear safety research master plan

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Jae Joo; Yang, J. U.; Jun, Y. S. and others

    2001-06-01

    The SRMP (Safety Research Master Plan) is established to cope with the changes of nuclear industry environments. The tech. tree is developed according to the accident progress of the nuclear reactor. The 11 research fields are derived to cover the necessary technologies to ensure the safety of nuclear reactors. Based on the developed tech. tree, the following four main research fields are derived as the main safety research areas: 1. Integrated nuclear safety enhancement, 2. Thermal hydraulic experiment and assessment, 3. Severe accident management and experiment, and 4. The integrity of equipment and structure. The research frame and strategies are also recommended to enhance the efficiency of research activity, and to extend the applicability of research output.

  12. JRC activities in nuclear safety

    Directory of Open Access Journals (Sweden)

    Manna Giustino

    2009-01-01

    Full Text Available Nuclear energy is today the largest single source of carbon free and base-load electricity in Europe. While highlighting its important role in the overall energy mix, it is necessary to address sustainability, safety, and security concerns, in particular nuclear safety and nuclear waste management issues, which influence the public acceptance of nuclear energy. The present paper describes the Joint Research Centre activities in support to the EU nuclear safety policy. It describes the Joint Research Centre role in the EU institutional context, identifies the various customers to which the Joint Research Centre delivers its services, and provides some results of the Joint Research Centre scientific work inherent to nuclear safety.

  13. Fluor Hanford Safety Management Program

    Energy Technology Data Exchange (ETDEWEB)

    WILLIAMS, J.D.

    2003-02-06

    This document summarizes safety management programs used within the scope of the project Hanford Management Contract (PHMC). The document had been developed to meet the format & content requirements of DOE-STD-3009-94, CH-2.

  14. Girlfriends' Health and Safety Tips

    Science.gov (United States)

    ... Professionals Girlfriends’ Health Heart Disease Prevention Mother’s Day Weddings Multimedia Badges and Buttons Podcasts National Women’s Health ... Vaccinations Violence Prevention What Should You Know About Blood Disorders in Women? Women's Safety and Health Issues ...

  15. The rewards of road safety

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    In May, the HSE Unit launched a cycling safety campaign at CERN over three days during which members of the Unit and representatives of the Swiss Office for Accident Prevention and the Touring Club Suisse reminded people of the basic safety rules to which they should adhere when riding a bike. A competition was held to encourage people to be self-critical and to highlight best practice.    On 14 June, a month and 273 participants later, 40 lucky contestants received winners' prizes in a low-key reception at Restaurant 2. Among the prizes were "safety packs" containing a fluorescent jacket, arm-bands and a water-bottle, cycle helmets and two brand new bikes. More proof, if any were needed, that safety and prevention form a winning combination!  

  16. Suitable footwear for enhanced safety

    CERN Document Server

    2004-01-01

    Safety shoes are the theme of a new safety campaign. Always remember that accidents can happen - even to your feet! When entering hazardous areas such as underground halls, work sites, experiment assembly sites, workshops etc., sandals, ordinary shoes or similar light footwear should not be worn. Whatever the risks to which you may be exposed, always think safety and wear suitable footwear, i.e. safety shoes, which have non-slip soles and steel reinforcements to protect your feet from being crushed, fractured or pierced. Is it serious, Doctor? "Some traumas resulting from foot-related accidents - open fractures for instance - can be quite serious," explains CERN Works Doctor Véronique Fassnacht. "But the most common injuries are sprained ankles sustained during simple falls caused by differences in floor-levels (e.g. false floors). Fractures, bruising, surface wounds or deep wounds caused by objects falling onto the top of the foot are also quite common." ...

  17. Food Safety After a Tsunami

    Science.gov (United States)

    ... Disease Transmission in Pet Shelters Protect Your Pets Food Safety After a Tsunami Language: English Español (Spanish) ... baby formula that requires no added water. Keeping Foods Cold If available, dry ice can be used ...

  18. Food Safety for Your Family

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Food Safety for Your Family KidsHealth / For Parents / Food ... foods you prepare in it are safe. Buying Food Buying safe food is the first step. To ...

  19. Patient Safety Threat - Syringe Reuse

    Science.gov (United States)

    ... to Prevent HAIs HICPAC One & Only Campaign A Patient Safety Threat – Syringe Reuse Recommend on Facebook Tweet Share Compartir Important ... due to syringe reuse by your healthcare provider. Patients need to be aware of a very serious ...

  20. Systems Thinking and Patient Safety

    National Research Council Canada - National Science Library

    Schyve, Paul M

    2005-01-01

    Patient safety is a prominent theme in health care delivery today. This should come as no surprise, given that "first, do no harm" has been the ethical watchword throughout the history of medicine, nursing, and pharmacy...

  1. AAA Foundation for Traffic Safety

    Science.gov (United States)

    ... Safety Culture Every 15 minutes, someone dies on America’s roadways. Fatalities include drivers, passengers, pedestrians, cyclists, and every other kind of road user. ... AAA: Road debris causes avoidable crashes, deaths Save the driver or save ...

  2. Work Pressure and Safety Behaviors among Health Workers in Ghana: The Moderating Role of Management Commitment to Safety

    Directory of Open Access Journals (Sweden)

    Kwesi Amponsah-Tawaih

    2016-12-01

    Conclusion: When employees perceive safety communication, safety systems and training to be positive, they seem to comply with safety rules and procedures than voluntarily participate in safety activities.

  3. Industrial hazard and safety handbook

    CERN Document Server

    King, Ralph W

    1979-01-01

    Industrial Hazard and Safety Handbook (Revised Impression) describes and exposes the main hazards found in industry, with emphasis on how these hazards arise, are ignored, are identified, are eliminated, or are controlled. These hazard conditions can be due to human stresses (for example, insomnia), unsatisfactory working environments, as well as secret industrial processes. The book reviews the cost of accidents, human factors, inspections, insurance, legal aspects, planning for major emergencies, organization, and safety measures. The text discusses regulations, codes of practice, site layou

  4. Safety Bulletin 2013-4

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit has just released the Safety Bulletin 2013-4 entitled “Electrical work: protect yourself!”.   The Bulletin is available on EDMS under the following number: 1336918. We would like to remind you that HSE Safety Bulletins are published in English and French and share feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention.

  5. Safety Bulletin 2013-1

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit has just released the Safety Bulletin 2013-1 entitled “When the alarm rings, you must leave!”.   The Bulletin is available on EDMS under the following number: 1307611. Be reminded  that HSE Safety Bulletins are published in English and French and share feedback on incidents/nearmiss/accidents on the CERN site with the aim of improving prevention.

  6. Safety Bulletin 2013-2

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit just released the Safety Bulletin 2013-2 entitled “Protect your head!”.   The Bulletin is available on EDMS under the following number: 1323573. We would like to remind you that HSE Safety Bulletins are published in English and French and share feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention.

  7. Safety Bulletin 2013-3

    CERN Multimedia

    HSE Unit

    2013-01-01

    The HSE Unit just released the Safety Bulletin 2013-3 entitled “Drive with caution!”.   The Bulletin is available on EDMS under the following number: 1325442. Be reminded  that HSE Safety Bulletins are published in English and French and share feedbacks of incidents/nearmiss/accidents that happened on the CERN site with the aim to improve prevention.

  8. Safety regions in the Netherlands

    OpenAIRE

    Jazić, Aleksandar

    2016-01-01

    Political, economic, social and environmental changes that accompany the development of the modern world, encourage states to implement changes in the security field. One of these countries is the Netherlands, which reformed its system of public security by introducing safety regions. The safety regions represent a new form of organization in the field of emergency and disaster. They are not a new level of local government but rather a new form of public policy that involves all levels of the...

  9. Reactor operation safety information document

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

  10. Gallium Safety in the Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2003-06-01

    A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

  11. Gallium Safety in the Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, L.C.

    2003-05-07

    A university laboratory experiment for the US Department of Energy magnetic fusion research program required a simulant for liquid lithium. The simulant choices were narrowed to liquid gallium and galinstan (Ga-In-Sn) alloy. Safety information on liquid gallium and galinstan were compiled, and the choice was made to use galinstan. A laboratory safety walkthrough was performed in the fall of 2002 to support the galinstan experiment. The experiment has been operating successfully since early 2002.

  12. Southern Great Plains Safety Orientation

    Energy Technology Data Exchange (ETDEWEB)

    Schatz, John

    2014-05-01

    Welcome to the Atmospheric Radiation Measurement (ARM) Climate Research Facility (ARM) Southern Great Plains (SGP) site. This U.S. Department of Energy (DOE) site is managed by Argonne National Laboratory (ANL). It is very important that all visitors comply with all DOE and ANL safety requirements, as well as those of the Occupational Safety and Health Administration (OSHA), the National Fire Protection Association, and the U.S. Environmental Protection Agency, and with other requirements as applicable.

  13. Hanford Generic Interim Safety Basis

    Energy Technology Data Exchange (ETDEWEB)

    Lavender, J.C.

    1994-09-09

    The purpose of this document is to identify WHC programs and requirements that are an integral part of the authorization basis for nuclear facilities that are generic to all WHC-managed facilities. The purpose of these programs is to implement the DOE Orders, as WHC becomes contractually obligated to implement them. The Hanford Generic ISB focuses on the institutional controls and safety requirements identified in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  14. Topaz II preliminary safety assessment

    Science.gov (United States)

    Marshall, Albert C.; Standley, Vaughn; Voss, Susan S.; Haskin, Eric

    1993-01-01

    The Strategic Defense Initiative Organization (SDIO) decided to investigate the possibility of launching a Russian Topaz II space nuclear power system. A preliminary safety assessment was conducted to determine whether or not a space mission could be conducted safely and within budget constraints. As part of this assessment, a safety policy and safety functional requirements were developed to guide both the safety assessment and future Topaz II activities. A review of the Russian flight safety program was conducted and documented. Our preliminary safety assessment included a top level event tree, neutronic analysis of normal and accident configurations, an evaluation of temperature coefficients of reactivity, a reentry and disposal analysis, and analysis of postulated launch abort impact accidents, and an analysis of postulated propellant fire and explosion accidents. Based on the assessment, it appears that it will be possible to safely launch the Topaz II system in the U.S. with some possible system modifications. The principal system modifications will probably include design changes to preclude water flooded criticality and to assure intact reentry.

  15. Safety analysis SFR 1. Long-term safety

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    An updated assessment of the long-term safety of SKB's final repository for radioactive operational waste, SFR 1, is presented in this report. The report is included in the safety analysis report for SFR 1. The most recent account of long-term safety was submitted to the regulatory authorities in 2001. The present report has been compiled on SKB's initiative to address the regulatory authorities' viewpoints regarding the preceding account of long-term safety. Besides the new mode of working with safety functions there is another important difference between the 2001 safety assessment and the current assessment: The time horizon in the current assessment has been extended to 100,000 years in order to include the effect of future climate changes. The purpose of this renewed assessment of the long-term safety of SFR 1 is to show with improved data that the repository is capable of protecting human health and the environment against ionizing radiation in a long-term perspective. This is done by showing that calculated risks lie below the risk criteria stipulated by the regulatory authorities. SFR 1 is built to receive, and after closure serve as a passive repository for, low. and intermediate-level radioactive waste. The disposal chambers are situated in rock beneath the sea floor, covered by about 60 metres of rock. The underground part of the facility is reached via two tunnels whose entrances are near the harbour. The repository has been designed so that it can be abandoned after closure without further measures needing to be taken to maintain its function. The waste in SFR 1 is short-lived low- and intermediate-level waste. After 100 years the activity is less than half, and after 1,000 years only about 2% of the original activity remains. The report on long-term safety comprises eleven chapters. Chapter 1 Introduction. The chapter describes the purpose, background, format and contents of SAR-08, applicable regulations and injunctions, and the

  16. The moderating role of safety-specific trust on the relation between safety-specific leadership and safety citizenship behaviors.

    Science.gov (United States)

    Conchie, Stacey M; Donald, Ian J

    2009-04-01

    The authors examined whether safety-specific trust moderates or mediates the relationship between safety-specific transformational leadership and subordinates' safety citizenship behavior. Data from 139 subordinate-supervisor dyads were collected from the United Kingdom construction industry and analyzed using hierarchical regression models. Results showed that safety-specific trust moderated rather than mediated the effects of safety-specific transformational leaders on subordinates' behavior. Specifically, in conditions of high and moderate safety-specific trust, leaders had a significant effect on subordinates' safety citizenship behavior. However, in conditions of low safety-specific trust, leaders did not significantly influence subordinates' safety citizenship behavior. The implications of these findings for general safety theory and practice are discussed.

  17. Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

    Science.gov (United States)

    Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

    2008-10-01

    In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

  18. Mining Behavior Based Safety Data to Predict Safety Performance

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey C. Joe

    2010-06-01

    The Idaho National Laboratory (INL) operates a behavior based safety program called Safety Observations Achieve Results (SOAR). This peer-to-peer observation program encourages employees to perform in-field observations of each other's work practices and habits (i.e., behaviors). The underlying premise of conducting these observations is that more serious accidents are prevented from occurring because lower level “at risk” behaviors are identified and corrected before they can propagate into culturally accepted “unsafe” behaviors that result in injuries or fatalities. Although the approach increases employee involvement in safety, the premise of the program has not been subject to sufficient empirical evaluation. The INL now has a significant amount of SOAR data on these lower level “at risk” behaviors. This paper describes the use of data mining techniques to analyze these data to determine whether they can predict if and when a more serious accident will occur.

  19. Patient safety curriculum in medical education.

    Science.gov (United States)

    Lee, Young-Mee

    2009-09-01

    Since release of the Institute of Medicine (IOM) report, To Err Is Human: Building a Safer System, patient safety has emerged as a global concern in the provision of quality health care. In response to growing recognition of the importance of patient safety, some medical schools in other countries have created and/or implemented patient safety curricula. In Korea, however, patient safety medical curriculum has not been actively discussed by medical educators. The purpose of this article is to introduce patient safety concepts and the global efforts on patient safety medical education. Specifically, this article describes; 1) current concepts in patient safety, 2) global trends of patient safety movement and education, 3) contents, instructional and assessment methods of patient safety education for both undergraduate medical education and graduate medical education, suggested in the previous studies, 4) WHO Patient Safety Guide for Medical Curriculum developed by the Medical Education Team within the World Alliance for Patient Safety and 5) known barriers against patient safety education. Patient safety is a major priority for all healthcare providers. In reality, however, teaching and learning about patient safety in medical curriculum offers a challenge to all medical schools, especially, the health care environment is not favorable to physicians such as Korea. More attention and recognition about patient safety by all health personnel and medical educators is needed. In addition, the national conversation about medical errors and patient safety and how best to incorporate it to the existing curriculum should be discussed.

  20. 36 CFR 4.15 - Safety belts.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Safety belts. 4.15 Section 4... TRAFFIC SAFETY § 4.15 Safety belts. (a) Each operator and passenger occupying any seating position of a motor vehicle in a park area will have the safety belt or child restraint system properly fastened at...

  1. 14 CFR 27.1413 - Safety belts.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 27.1413 Section 27.1413 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1413 Safety belts. Each safety belt...

  2. 30 CFR 57.6502 - Safety fuse.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety fuse. 57.6502 Section 57.6502 Mineral...-Surface and Underground § 57.6502 Safety fuse. (a) The burning rate of each spool of safety fuse to be used shall be measured, posted in locations which will be conspicuous to safety fuse users, and brought...

  3. 30 CFR 56.6502 - Safety fuse.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety fuse. 56.6502 Section 56.6502 Mineral....6502 Safety fuse. (a) The burning rate of each spool of safety fuse to be used shall be measured, posted in locations which will be conspicuous to safety fuse users, and brought to the attention of all...

  4. 50 CFR 25.71 - Public safety.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Public safety. 25.71 Section 25.71... NATIONAL WILDLIFE REFUGE SYSTEM ADMINISTRATIVE PROVISIONS Safety Regulations § 25.71 Public safety. Persons using national wildlife refuges shall comply with the safety requirements which are established under...

  5. Relationship between employees\\' safety climate and safety performance with respect to mediating effect of safety knowledge and safety motivation in Sarcheshmeh copper complex

    Directory of Open Access Journals (Sweden)

    A. Khaleghinejad

    2015-12-01

      Conclosion: Overall, it is recommended to improve safety climate, considering its influencing components. Employees' safety knowledge and safety motivation should also be promoted. Additionally, it is recommended to determine other personal and organizational parameters and include them into the model. By determining the mediating variables, their role in the safety performance can be investigated.

  6. Safety performance indicators for the road network.

    NARCIS (Netherlands)

    Weijermars, W. Gitelman, V. Papadimitriou, E. Lima De & Azevedo, C.

    2010-01-01

    Within the 6th FP European project SafetyNet, a team has worked on the development of Safety Performance Indicators (SPIs) on seven road safety related areas. These SPIs reflect the operational conditions of the road traffic system that influence the system's safety performance. SPIs were developed

  7. Challenging patient safety culture: survey results

    NARCIS (Netherlands)

    Hellings, Johan; Schrooten, Ward; Klazinga, Niek; Vleugels, Arthur

    2007-01-01

    PURPOSE: The purpose of this paper is to measure patient safety culture in five Belgian general hospitals. Safety culture plays an important role in the approach towards greater patient safety in hospitals. DESIGN/METHODOLOGY/APPROACH: The Patient Safety Culture Hospital questionnaire was

  8. Determinants for conducting food safety culture research

    NARCIS (Netherlands)

    Nyarugwe, Shingai P.; Linnemann, Anita; Hofstede, Gert Jan; Fogliano, Vincenzo; Luning, Pieternel A.

    2016-01-01

    Background Foodborne outbreaks continue to occur regardless of existing food safety measures indicating the shortcomings of these measures to assure food safety. This has led to the recognition of food safety culture as a key contributory factor to the food safety performance of food

  9. System safety education focused on industrial engineering

    Science.gov (United States)

    Johnston, W. L.; Morris, R. S.

    1971-01-01

    An educational program, designed to train students with the specific skills needed to become safety specialists, is described. The discussion concentrates on application, selection, and utilization of various system safety analytical approaches. Emphasis is also placed on the management of a system safety program, its relationship with other disciplines, and new developments and applications of system safety techniques.

  10. Patient safety climate and worker safety behaviours in acute hospitals in Scotland.

    Science.gov (United States)

    Agnew, Cakil; Flin, Rhona; Mearns, Kathryn

    2013-06-01

    To obtain a measure of hospital safety climate from a sample of National Health Service (NHS) acute hospitals in Scotland and to test whether these scores were associated with worker safety behaviors, and patient and worker injuries. Data were from 1,866 NHS clinical staff in six Scottish acute hospitals. A Scottish Hospital Safety Questionnaire measured hospital safety climate (Hospital Survey on Patient Safety Culture), worker safety behaviors, and worker and patient injuries. The associations between the hospital safety climate scores and the outcome measures (safety behaviors, worker and patient injury rates) were examined. Hospital safety climate scores were significantly correlated with clinical workers' safety behavior and patient and worker injury measures, although the effect sizes were smaller for the latter. Regression analyses revealed that perceptions of staffing levels and managerial commitment were significant predictors for all the safety outcome measures. Both patient-specific and more generic safety climate items were found to have significant impacts on safety outcome measures. This study demonstrated the influences of different aspects of hospital safety climate on both patient and worker safety outcomes. Moreover, it has been shown that in a hospital setting, a safety climate supporting safer patient care would also help to ensure worker safety. The Scottish Hospital Safety Questionnaire has proved to be a usable method of measuring both hospital safety climate as well as patient and worker safety outcomes. Copyright © 2013 National Safety Council and Elsevier Ltd. Published by Elsevier Ltd. All rights reserved.

  11. Architecture Level Safety Analyses for Safety-Critical Systems

    Directory of Open Access Journals (Sweden)

    K. S. Kushal

    2017-01-01

    Full Text Available The dependency of complex embedded Safety-Critical Systems across Avionics and Aerospace domains on their underlying software and hardware components has gradually increased with progression in time. Such application domain systems are developed based on a complex integrated architecture, which is modular in nature. Engineering practices assured with system safety standards to manage the failure, faulty, and unsafe operational conditions are very much necessary. System safety analyses involve the analysis of complex software architecture of the system, a major aspect in leading to fatal consequences in the behaviour of Safety-Critical Systems, and provide high reliability and dependability factors during their development. In this paper, we propose an architecture fault modeling and the safety analyses approach that will aid in identifying and eliminating the design flaws. The formal foundations of SAE Architecture Analysis & Design Language (AADL augmented with the Error Model Annex (EMV are discussed. The fault propagation, failure behaviour, and the composite behaviour of the design flaws/failures are considered for architecture safety analysis. The illustration of the proposed approach is validated by implementing the Speed Control Unit of Power-Boat Autopilot (PBA system. The Error Model Annex (EMV is guided with the pattern of consideration and inclusion of probable failure scenarios and propagation of fault conditions in the Speed Control Unit of Power-Boat Autopilot (PBA. This helps in validating the system architecture with the detection of the error event in the model and its impact in the operational environment. This also provides an insight of the certification impact that these exceptional conditions pose at various criticality levels and design assurance levels and its implications in verifying and validating the designs.

  12. Recommended research on LNG safety

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, H.J.; Gilmore, F.R.

    1981-03-01

    The US Department of Energy (DOE) is conducting research on the safety and other environmental aspects of liquefied energy gases including liquefied natural gas (LNG). The effort reported here was conducted as part of the planning for further research into the safety aspects of transporting and storing LNG, with primary emphasis on public safety. Although the modern LNG industry has enjoyed excellent success in providing for safe operations, significant questions remain on the part of many, the expressions of which were intensified with the addition of marine-based LNG import terminals. Public safety with regard to large-scale importation of this fuel has received widespread attention in the US Congress, state legislatures, county and city governments, and from various individuals and public groups, with coverage in all the news media, including books published on the subject. The safety concerns have centered around the consequences to the public of a large spill of the cryogenic liquid from an ocean tanker or a larger storage tank, either of which might hold as much as 125,000 m/sup 3/ of LNG.

  13. LNG Safety Assessment Evaluation Methods

    Energy Technology Data Exchange (ETDEWEB)

    Muna, Alice Baca [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-05-01

    Sandia National Laboratories evaluated published safety assessment methods across a variety of industries including Liquefied Natural Gas (LNG), hydrogen, land and marine transportation, as well as the US Department of Defense (DOD). All the methods were evaluated for their potential applicability for use in the LNG railroad application. After reviewing the documents included in this report, as well as others not included because of repetition, the Department of Energy (DOE) Hydrogen Safety Plan Checklist is most suitable to be adapted to the LNG railroad application. This report was developed to survey industries related to rail transportation for methodologies and tools that can be used by the FRA to review and evaluate safety assessments submitted by the railroad industry as a part of their implementation plans for liquefied or compressed natural gas storage ( on-board or tender) and engine fueling delivery systems. The main sections of this report provide an overview of various methods found during this survey. In most cases, the reference document is quoted directly. The final section provides discussion and a recommendation for the most appropriate methodology that will allow efficient and consistent evaluations to be made. The DOE Hydrogen Safety Plan Checklist was then revised to adapt it as a methodology for the Federal Railroad Administration’s use in evaluating safety plans submitted by the railroad industry.

  14. Patient Safety in Transfusion Medicine

    Directory of Open Access Journals (Sweden)

    Ana Isabel Simão Teles

    2014-11-01

    Full Text Available Patient safety is a new area gaining ground and many followers. In the past two decades, many international organizations have developed initiatives to increase knowledge in this area. We might consider that patient safety focuses on the study of the impact of adverse events resulting from the provision of health care for patients. This dimension cuts across all healthcare areas because every care is always underlying the risk-benefit binomial. Transfusional medicine is no exception. Transfusion safety includes not only the safety of blood and blood components as a therapeutic product, but also the safety of the transfusion process. The transfusion process involves a large set of steps and actors, which generates a complex network of processes’ interactions and multidisciplinary professionals. This complexity provides an environment prone to the occurrence of adverse events. The majority of these events are the result of errors occurring throughout the transfusion chain and may have a negative impact on the health of the patient. Errors can trigger adverse reactions in patients with varying consequences, which can range from 'minor' situations, through various states of morbidity and even death.

  15. Cryogenic Safety Rules and Guidelines at CERN

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    CERN defines and implements a Safety Policy that sets out the general principles governing safety at CERN. As an intergovernmental organisation, CERN further establishes its own Safety Rules as necessary for its proper functioning. In this process, it takes into account the laws and regulation of the Host States (France and Switzerland), EU regulations and directives, as well as international regulations, standards and directives. For the safety of cryogenic equipment, this is primarily covered by the Safety Regulation for Mechanical Equipment and the General Safety Instruction for Cryogenic Equipment. In addition, CERN has also developed Safety Guidelines to support the implementation of these safety rules, covering cryogenic equipment and oxygen deficiency hazard assessment and mitigation. An overview of the cryogenic safety rules and these safety guidelines will be presented.

  16. New set of Chemical Safety rules

    CERN Multimedia

    HSE Unit

    2011-01-01

    A new set of four Safety Rules was issued on 28 March 2011: Safety Regulation SR-C ver. 2, Chemical Agents (en); General Safety Instruction GSI-C1, Prevention and Protection Measures (en); General Safety Instruction GSI-C2, Explosive Atmospheres (en); General Safety Instruction GSI-C3, Monitoring of Exposure to Hazardous Chemical Agents in Workplace Atmospheres (en). These documents form part of the CERN Safety Rules and are issued in application of the “Staff Rules and Regulations” and of document SAPOCO 42. These documents set out the minimum requirements for the protection of persons from risks to their occupational safety and health arising, or likely to arise, from the effects of hazardous chemical agents that are present in the workplace or used in any CERN activity. Simultaneously, the HSE Unit has published seven Safety Guidelines and six Safety Forms. These documents are available from the dedicated Web page “Chemical, Cryogenic and Biological Safety&...

  17. Relationships between psychological safety climate facets and safety behavior in the rail industry: a dominance analysis.

    Science.gov (United States)

    Morrow, Stephanie L; McGonagle, Alyssa K; Dove-Steinkamp, Megan L; Walker, Curtis T; Marmet, Matthew; Barnes-Farrell, Janet L

    2010-09-01

    The goals of this study were twofold: (1) to confirm a relationship between employee perceptions of psychological safety climate and safety behavior for a sample of workers in the rail industry and (2) to explore the relative strengths of relationships between specific facets of safety climate and safety behavior. Non-management rail maintenance workers employed by a large North American railroad completed a survey (n=421) regarding workplace safety perceptions and behaviors. Three facets of safety climate (management safety, coworker safety, and work-safety tension) were assessed as relating to individual workers' reported safety behavior. All three facets were significantly associated with safety behavior. Dominance analysis was used to assess the relative importance of each facet as related to the outcome, and work-safety tension evidenced the strongest relationship with safety behavior. Published by Elsevier Ltd.

  18. Pursuing for the case of safety

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, H.; Salaber, A. (Geco-Prakla, Paris (France)); Myers, S. (Sedco Forex, Montrouge (France)); Redd, E. (Sedco Forex, Aberdeen (United Kingdom)); Shannon, R. (Anadrill HSE, London (United Kingdom))

    1993-01-01

    Ever since the Piper Alpha disaster, safety has become one of the industry's hottest issues. Attention to safety leads to improved communication within organizations as well as between operators and contractors, and ultimately to more efficient operations. In this article descriptions are given of safety management systems, the safety-case philosophy and legislative changes hat are helping promote these new safety tools. 6 figs., 4 ills., 3 refs.

  19. Enhancing Safety through Generic Competencies

    Directory of Open Access Journals (Sweden)

    S. Mockel

    2014-03-01

    Full Text Available This article provides insights into proactive safety management and mitigation. An analysis of accident reports reveals categories of supervening causes of accidents which can be directly linked to the concept of generic competencies (information management, communication and coordination, problem solving, and effect control. These findings strongly suggest adding the human element as another safety-constituting pillar to the concept of ship safety next to technology and regulation. We argue that the human element has unique abilities in dealing with critical and highly dynamic situations which can contribute to the system's recovery from non-routine or critical situations. By educating seafarers in generic competencies we claim to enable the people onboard to successfully deal with critical situations.

  20. Time out for patient safety.

    Science.gov (United States)

    Meginniss, Anne; Damian, Frances; Falvo, Francine

    2012-01-01

    "Time out for patient safety" is a simple and effective tool to improve communication among caregivers based on the use of critical language that has been effective in the perioperative setting, airline industry, and military. In the emergency department it is non threatening and focuses attention on safe patient care. "Time out for patient safety" complements the use of other standardized communication techniques such as SBAR in clinical situations in which immediate intervention is mandatory for patient safety.This communication tool was presented to the multidisciplinary staff and has been embedded in the Emergency Department's simulation program for newly graduated nurses. The concept was well received by the group.Future research is needed to address outcomes for effectiveness.

  1. [Safety in the Microbiology laboratory].

    Science.gov (United States)

    Rojo-Molinero, Estrella; Alados, Juan Carlos; de la Pedrosa, Elia Gómez G; Leiva, José; Pérez, José L

    2015-01-01

    The normal activity in the laboratory of microbiology poses different risks - mainly biological - that can affect the health of their workers, visitors and the community. Routine health examinations (surveillance and prevention), individual awareness of self-protection, hazard identification and risk assessment of laboratory procedures, the adoption of appropriate containment measures, and the use of conscientious microbiological techniques allow laboratory to be a safe place, as records of laboratory-acquired infections and accidents show. Training and information are the cornerstones for designing a comprehensive safety plan for the laboratory. In this article, the basic concepts and the theoretical background on laboratory safety are reviewed, including the main legal regulations. Moreover, practical guidelines are presented for each laboratory to design its own safety plan according its own particular characteristics. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  2. Safety management, under different regimes

    Energy Technology Data Exchange (ETDEWEB)

    Weibye, B.S. [Norske Veritas, Oslo (Norway)

    1996-12-31

    The paper relates to safety management in the North Sea. This presentation will look at the interplay between the forces and factors driving political authorities representing the interest of society on one side and the owners/operators on the other. The maturation process or evolution from a prescriptive to an objective approach will be examined both in Norway with the implementation of the Internal Control philosophy and using the Piper Alpha disaster, Lord Cullen`s public Inquiry and the subsequent enactment of the Offshore Safety Case in the UK as case examples. The impact these regulatory changes had on the Safety Management Systems of operators in the Norwegian and UK sectors of the North Sea will be outlined. Finally the transitions in the North Sea will be examined to determine if they can if they can be used as a model for exporting to other ares or countries. 4 refs.

  3. Vehicle Battery Safety Roadmap Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, D. H.

    2012-10-01

    The safety of electrified vehicles with high capacity energy storage devices creates challenges that must be met to assure commercial acceptance of EVs and HEVs. High performance vehicular traction energy storage systems must be intrinsically tolerant of abusive conditions: overcharge, short circuit, crush, fire exposure, overdischarge, and mechanical shock and vibration. Fail-safe responses to these conditions must be designed into the system, at the materials and the system level, through selection of materials and safety devices that will further reduce the probability of single cell failure and preclude propagation of failure to adjacent cells. One of the most important objectives of DOE's Office of Vehicle Technologies is to support the development of lithium ion batteries that are safe and abuse tolerant in electric drive vehicles. This Roadmap analyzes battery safety and failure modes of state-of-the-art cells and batteries and makes recommendations on future investments that would further DOE's mission.

  4. Harnessing science to improve safety.

    Science.gov (United States)

    Baillie, Jonathan

    2011-01-01

    Examining the effectiveness of various wet surface cleaning methods in combating harmful microorganisms in a hospital ward, understanding different healthcare cleaning regimes' impact on reducing slips and trips, evaluating the protection offered by surgical masks against influenza bioaerosols, and independently testing tower crane safety following a number of fatal incidents, are among the broad spectrum of recent projects undertaken by the Buxton-headquartered Health and Safety Laboratory (HSL). As HEJ editor Jonathan Baillie discovered from the organisation's healthcare and patient safety lead, Darren Whitehouse, with around 350 scientists skilled in everything from microbiology to occupational psychology, the range of scientific guidance, expertise, advice, testing, training, and investigation, that the HSL can offer to the healthcare sector is perhaps unrivalled throughout Europe.

  5. Autoclave nuclear criticality safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    D`Aquila, D.M. [Martin Marietta Energy Systems, Inc., Piketon, OH (United States); Tayloe, R.W. Jr. [Battelle, Columbus, OH (United States)

    1991-12-31

    Steam-heated autoclaves are used in gaseous diffusion uranium enrichment plants to heat large cylinders of UF{sub 6}. Nuclear criticality safety for these autoclaves is evaluated. To enhance criticality safety, systems are incorporated into the design of autoclaves to limit the amount of water present. These safety systems also increase the likelihood that any UF{sub 6} inadvertently released from a cylinder into an autoclave is not released to the environment. Up to 140 pounds of water can be held up in large autoclaves. This mass of water is sufficient to support a nuclear criticality when optimally combined with 125 pounds of UF{sub 6} enriched to 5 percent U{sup 235}. However, water in autoclaves is widely dispersed as condensed droplets and vapor, and is extremely unlikely to form a critical configuration with released UF{sub 6}.

  6. Safety of pulmonary function testing

    DEFF Research Database (Denmark)

    Roberts, Cara; Ward, Simon; Walsted, Emil

    2017-01-01

    BACKGROUND: Pulmonary function testing (PFT) is a key investigation in the evaluation of individuals with respiratory symptoms; however, the safety of routine and specialised PFT testing has not been reported in a large data set. Using patient safety incident (PSI) records, we aimed to assess risk...... was rated using the NHS National Patient Safety Agency and any hospital admission reported. RESULTS: There were 119 PSIs reported from 186 000 PFT; that is, 0.6 PSIs per 1000 tests. Cardiopulmonary PSIs were 3.3 times more likely to occur than non-cardiopulmonary (95% CI 2.17 to 5.12). Syncope was the most...... and specialised PFT is safe for patients, in the context of established screening preparticipation guidelines. In the event of a PSI, these are likely to be low risk of harm. Our findings highlight the most common PSIs encountered during PFT to facilitate risk reduction....

  7. Food safety and consumer behaviour

    DEFF Research Database (Denmark)

    Frewer, Lynn; Fischer, Arnout; Scholderer, Joachim

    2005-01-01

    Food safety is a priority for many consumers, and there is an expectation throughout society that the food supplied for human consumption is safe and nutritious to eat. Understanding technical risk estimates alone, however, will not explain the risk-related behaviours of consumers. On the one hand......, consumers may not pay enough attention to some types of food safety issue, such as the risk of food poisoning from microbial contamination, which may at best be debilitating, and at worst fatal (Center for Disease Control and Prevention, 1994). This risk is certainly largely avoidable through taking...... communities have frequently bemoaned negative consumer attitudes towards some food technologies, such as genetic engineering, while failing to consider the origins of these consumer attitudes. The behaviour of consumers in relation to food safety issues can only be properly understood if there is systematic...

  8. Process control under safety aspects

    Energy Technology Data Exchange (ETDEWEB)

    Vollmer, T. E-mail: theo.vollmer@hvt.fzk.de; Borcherding, K.; Hellriegel, G.; Penzhorn, R.-D

    2000-08-01

    The safety of people and the environment is increasingly important in the operation and, consequently, also in the project design of process equipment. Rules and regulations for safeguarding of industrial process plants (not-nuclear and nuclear) by means of process control engineering are either being developed or expanded. This includes the international harmonization of existing national codes. This article presents an introduction into the philosophy of ensuring plant safety by means of instrumentation and control protection systems. The methods of risk assessment are described, and various potential solutions are shown which are geared to achieving the necessary level of safety and, at the same time, allowing flexible operation to be maintained. Reference is made to the problems existing with respect to integrating people into this process, i.e. man-machine interaction, especially in view of possible interventions in emergencies.

  9. SafetyAnalyst : software tools for safety management of specific highway sites

    Science.gov (United States)

    2010-07-01

    SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

  10. 77 FR 25179 - Patient Safety Organizations: Voluntary Relinquishment From Surgical Safety Institute

    Science.gov (United States)

    2012-04-27

    ... HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary... the Surgical Safety Institute of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the listing of PSOs, which are...

  11. The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

    OpenAIRE

    Yuzhong Shen; Chuanjing Ju; Tas Yong Koh; Steve Rowlinson; Bridge, Adrian J.

    2017-01-01

    Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this ...

  12. Characteristics of the safety climate in teams with world-class safety ...

    African Journals Online (AJOL)

    order to assess what contributions these characteristics make to health and safety and how this could ... safety climate of a construction team with world-class safety records. To assess the impact of safety culture .... safety shoes, gloves, glasses. The key behaviours observed were: using the correct tools for a specific task,.

  13. 76 FR 12214 - Motor Carrier Safety Advisory Committee Public Meeting

    Science.gov (United States)

    2011-03-04

    ... Federal Motor Carrier Safety Administration Motor Carrier Safety Advisory Committee Public Meeting AGENCY: Federal Motor Carrier Safety Administration, DOT. ACTION: Notice: Announcement of Motor Carrier Safety Advisory Committee meeting; request for comment. SUMMARY: The Federal Motor Carrier Safety Administration...

  14. 75 FR 72863 - Motor Carrier Safety Advisory Committee Public Meeting

    Science.gov (United States)

    2010-11-26

    ... Federal Motor Carrier Safety Administration Motor Carrier Safety Advisory Committee Public Meeting AGENCY: Federal Motor Carrier Safety Administration, DOT. ACTION: Notice of Motor Carrier Safety Advisory Committee Meeting. SUMMARY: FMCSA announces that the Agency's Motor Carrier Safety Advisory Committee (MCSAC...

  15. Summary of Aviation Safety Program Resumes. Cabin Safety.

    Science.gov (United States)

    1980-10-01

    Autftorls) eta 0 - iFAA-ASf-80-3 Harrison, J. R., et ~ . *k/ k 9. Performing Or aiztion Hame and Address 10. Work Unit Me. (TRAIS) Office of ~Viation Safety14...standardization of cabin/cockpit comunication procedures, 6, PROJECT DETAILS ASF-300-ID 1. PROJECT lIlLE: CRASH SCENARIO DEFINITION UPDATE: 8/4/80 2

  16. 76 FR 53086 - Pipeline Safety: Safety of Gas Transmission Pipelines

    Science.gov (United States)

    2011-08-25

    ... new regulations are needed to govern the safety of gathering lines and underground gas storage... knowledge gained through the IM program. Strengthening requirements on the selection and use of assessment... construction defects, SCC, etc.) or in certain situations such as when certain knowledge is not available or...

  17. SAFETY ALERT: Electrical insulation defect on safety helmets

    CERN Multimedia

    HSE Unit

    2013-01-01

    Contrarily to the information provided until 31 May 2013, some “Euro Protection” safety helmets do not respect any of the requirements for electrical insulation.   This alert concerns the safety helmets identified under the following SCEM numbers: 50.43.30.050.4 white 50.43.30.060.2 yellow 50.43.30.070.0 blue This amounts up to several hundreds of helmets on the CERN site. People who need to wear an electrically insulated safety helmet for their activities, must from now on acquire a duly insulated item to be found on the CERN store under the following SCEM numbers: 50.43.30.210.6: Petzl Vertex ST Helmet (without vent) 50.43.30.300.1: IDRA Helmet with a visor for electrical work As for the people who do not need to wear an electrically insulated helmet for their activities, they can continue working with the aforementioned helmets. For your information, please take note of the maximum use limit of each helmet: “Euro Protection” Safety Helme...

  18. SafetyNet. Human factors safety training on the Internet

    DEFF Research Database (Denmark)

    Hauland, G.; Pedrali, M.

    2002-01-01

    This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

  19. Nuclear Criticality Safety Data Book

    Energy Technology Data Exchange (ETDEWEB)

    Hollenbach, D. F. [Y-12 National Security Complex, Oak Ridge, TN (United States)

    2016-11-14

    The objective of this document is to support the revision of criticality safety process studies (CSPSs) for the Uranium Processing Facility (UPF) at the Y-12 National Security Complex (Y-12). This design analysis and calculation (DAC) document contains development and justification for generic inputs typically used in Nuclear Criticality Safety (NCS) DACs to model both normal and abnormal conditions of processes at UPF to support CSPSs. This will provide consistency between NCS DACs and efficiency in preparation and review of DACs, as frequently used data are provided in one reference source.

  20. Laser safety in the lab

    CERN Document Server

    Barat, Ken L

    2012-01-01

    There is no more challenging setting for laser use than a research environment. In almost every other setting the laser controls count on engineering controls, and human exposure is kept to a minimum. In research, however, the user often manipulates the optical layout and thereby places him or herself in peril, but this does not mean that accidents and injury are unavoidable. On the contrary, laser accidents can be avoided by following a number of simple approaches. [i]Laser Safety in the Lab[/i] provides the laser user and laser safety officer with practical guidelines from housekeeping to ey

  1. Current collectors for improved safety

    Energy Technology Data Exchange (ETDEWEB)

    Abdelmalak, Michael Naguib; Allu, Srikanth; Dudney, Nancy J.; Li, Jianlin; Simunovic, Srdjan; Wang, Hsin

    2017-12-19

    A battery electrode assembly includes a current collector with conduction barrier regions having a conductive state in which electrical conductivity through the conduction barrier region is permitted, and a safety state in which electrical conductivity through the conduction barrier regions is reduced. The conduction barrier regions change from the conductive state to the safety state when the current collector receives a short-threatening event. An electrode material can be connected to the current collector. The conduction barrier regions can define electrical isolation subregions. A battery is also disclosed, and methods for making the electrode assembly, methods for making a battery, and methods for operating a battery.

  2. Safety Bulletin 2014-1

    CERN Multimedia

    HSE Unit

    2014-01-01

    The HSE Unit would like to inform you that Safety Bulletin 2014-1 entitled “Call for help!” has just been released.   The Bulletin is available on EDMS under the following number: 1346313. We would like to remind you that HSE Safety Bulletins are published in English and French, and incorporate feedback from incidents/near misses/accidents that have occurred on the CERN site with the aim of improving prevention. We remain at your disposal in case you have further questions.

  3. Safety considerations in grinding HMX

    Energy Technology Data Exchange (ETDEWEB)

    Moodie, W.J.

    1978-01-01

    Fine-particle HMX powders are of interest for a variety of applications in Department of Energy weapons programs. A process is described for producing these materials in two stages: first, precipitation to yield a relatively coarse, free-flowing product of the desired polymorph, followed by dry grinding in a fluid energy mill using air as the working fluid. Surface area of the final product can be specified over a wide range by varying the parameters of the grinding operation. Inherent safety features of this type of mill are discussed, in addition to several operating procedures which further increase the safety of the grinding process.

  4. Pressure Safety Orientation Live #769

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-17

    Pressure Safety Orientation (course #769) introduces workers at Los Alamos National Laboratory (LANL) to the Laboratory Pressure Safety Program and to pressure-related hazards. This course also affords a hands-on exercise involving the assembly of a simple pressure system. This course is required for all LANL personnel who work on or near pressure systems and are exposed to pressure-related hazards. These personnel include pressure-system engineers, designers, fabricators, installers, operators, inspectors, maintainers, and others who work with pressurized fluids and may be exposed to pressure-related hazards.

  5. Industrial requirements in food safety.

    Science.gov (United States)

    Vincent, P M

    1990-01-01

    The principles of establishing industrial requirements in food safety are described, taking risk potentials all along the food chain into their respective account. Regulations will, in the future, lead to increased autocontrol in production. The rapid changes in food technology require constant adaptation to new problems, to keep the global quality of food at a high level. Regulatory authorities will, in the new European market, concentrate on enforcement of 'essential requirements' while industrialists will follow good manufacturing practices. Open dialogue between the latter, the former and the scientific community is highly desirable since mutual knowledge of the problem will help maintain a high level of food safety, for the benefit of everybody.

  6. Quality and safety in radiotherapy

    CERN Document Server

    Pawlicki, Todd

    2010-01-01

    The first text to focus solely on quality and safety in radiotherapy, this work encompasses not only traditional, more technically oriented, quality assurance activities, but also general approaches of quality and safety. It includes contributions from experts both inside and outside the field to present a global view. The task of assuring quality is no longer viewed solely as a technical, equipment-dependent endeavor. Instead, it is now recognized as depending on both the processes and the people delivering the service. Divided into seven broad categories, the text covers: Quality Management

  7. A literature review of safety culture.

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Kerstan Suzanne; Stevens-Adams, Susan Marie; Wenner, Caren A.

    2013-03-01

    Workplace safety has been historically neglected by organizations in order to enhance profitability. Over the past 30 years, safety concerns and attention to safety have increased due to a series of disastrous events occurring across many different industries (e.g., Chernobyl, Upper Big-Branch Mine, Davis-Besse etc.). Many organizations have focused on promoting a healthy safety culture as a way to understand past incidents, and to prevent future disasters. There is an extensive academic literature devoted to safety culture, and the Department of Energy has also published a significant number of documents related to safety culture. The purpose of the current endeavor was to conduct a review of the safety culture literature in order to understand definitions, methodologies, models, and successful interventions for improving safety culture. After reviewing the literature, we observed four emerging themes. First, it was apparent that although safety culture is a valuable construct, it has some inherent weaknesses. For example, there is no common definition of safety culture and no standard way for assessing the construct. Second, it is apparent that researchers know how to measure particular components of safety culture, with specific focus on individual and organizational factors. Such existing methodologies can be leveraged for future assessments. Third, based on the published literature, the relationship between safety culture and performance is tenuous at best. There are few empirical studies that examine the relationship between safety culture and safety performance metrics. Further, most of these studies do not include a description of the implementation of interventions to improve safety culture, or do not measure the effect of these interventions on safety culture or performance. Fourth, safety culture is best viewed as a dynamic, multi-faceted overall system composed of individual, engineered and organizational models. By addressing all three components of

  8. Galileo Safety-of-Life Service Utilization for Railway Non-Safety and Safety Critical Applications

    Science.gov (United States)

    Mocek, Hynek; Filip, Aleš; Bazant, Lubor

    Global Navigation Satellite System (GNSS) Galileo is expected to play an essential role in railway transport with view to reduce operational, investment and maintenance costs. However, quality requirements of the GNSS originate mainly from the aviation suggestions. Different safety philosophies used in aviation domain and in railway signaling complicate direct employment of the GNSS quality measures to the railway telematic applications. The objective of this paper is to outline the conception of railway requirements specification for the GNSS in order to cover a large amount of the appropriate applications in the non-safety and safety related domains. The elaborated methodology enables to provide specification of minimal quantitative requirements for GNSS system by means of railway attributes RAMS. This process generally represents contribution for GNSS system certification, when it is necessary to demonstrate that the GNSS system meets requirements, and the system outputs are correct. In the second level, certification of the specific GNSS application must follow subsequently.

  9. An integrative model of organizational safety behavior.

    Science.gov (United States)

    Cui, Lin; Fan, Di; Fu, Gui; Zhu, Cherrie Jiuhua

    2013-06-01

    This study develops an integrative model of safety management based on social cognitive theory and the total safety culture triadic framework. The purpose of the model is to reveal the causal linkages between a hazardous environment, safety climate, and individual safety behaviors. Based on primary survey data from 209 front-line workers in one of the largest state-owned coal mining corporations in China, the model is tested using structural equation modeling techniques. An employee's perception of a hazardous environment is found to have a statistically significant impact on employee safety behaviors through a psychological process mediated by the perception of management commitment to safety and individual beliefs about safety. The integrative model developed here leads to a comprehensive solution that takes into consideration the environmental, organizational and employees' psychological and behavioral aspects of safety management. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

  10. Safety Training: places available in October 2014

    CERN Multimedia

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. Safety Training, HSE Unit safety-training@cern.ch Title of the course EN Title of the course FR Date Hours Language Chemical Safety ATEX Habilitation - Level 2 Habilitation ATEX - Niveau 2 16-Oct-14 to 17-Oct-14 9:00 - 17:30 French Cryogenic Safety Cryogenic Safety - Fundamentals Sécurité Cryogénie - Fondamentaux 23-Oct-14 10:00 - 12:00 English Cryogenic Safety - Helium Transfer Sécurité Cryogénie - Transfert d'hélium 30-Oct-14 9:30 - 12:00 English Electrical Safety Habilitation Electrique - Electrician Low Voltage - Initial Habilitation électrique - Électricien basse tension - Initial 02-Oct-14 to 06-Oct-14 9:00 - 17:30 English 20-Oct-14 to 22-Oct-14 9:00 -...

  11. Official News relating to CERN Safety Rules

    CERN Multimedia

    HSE Unit

    2015-01-01

    The CERN Safety Rules listed below have been published on the official CERN Safety Rules website (see here).   Safety Regulation SR-WS Works and services: this SR-WS (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”. General Safety Instruction GSI-WS-1 Safety coordination for works and services: this GSI-WS-1 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS39 “Notice of Start of Works (AOC)” and of Safety Instruction IS50 “Safety Coordination on CERN Worksites” ​Specific Safety Instruction SSI-WS-1-1 Safety coordinator for category 1 operations: this SSI-WS-1-4 (version 1) will cancel and replace the corresponding provisions of Safety Instruction IS50 “Safety Coordination on CERN Worksites”.​ ​ In order to limit the impact on the end-of-year technical st...

  12. Investigating attitude toward safety isuues among agricultural Jihad professionals with an emphasis on safety training

    Directory of Open Access Journals (Sweden)

    G.H. Karami

    2016-04-01

      Conclusion: Considering the importance of safety training, identifying the factors pertinent to agricultural experts' safety attitude would help safety experts to develop and implement strategies in order to reduce occupational accidents in this sector.

  13. Associations between safety climate and safety management practices in the construction industry.

    Science.gov (United States)

    Marín, Luz S; Lipscomb, Hester; Cifuentes, Manuel; Punnett, Laura

    2017-06-01

    Safety climate, a group-level measure of workers' perceptions regarding management's safety priorities, has been suggested as a key predictor of safety outcomes. However, its relationship with actual injury rates is inconsistent. We posit that safety climate may instead be a parallel outcome of workplace safety practices, rather than a determinant of workers' safety behaviors or outcomes. Using a sample of 25 commercial construction companies in Colombia, selected by injury rate stratum (high, medium, low), we examined the relationship between workers' safety climate perceptions and safety management practices (SMPs) reported by safety officers. Workers' perceptions of safety climate were independent of their own company's implementation of SMPs, as measured here, and its injury rates. However, injury rates were negatively related to the implementation of SMPs. Safety management practices may be more important than workers' perceptions of safety climate as direct predictors of injury rates. © 2017 Wiley Periodicals, Inc.

  14. 76 FR 7853 - Patient Safety Organizations: Voluntary Delisting From Oregon Patient Safety Commission

    Science.gov (United States)

    2011-02-11

    ... HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary Delisting From Oregon Patient Safety Commission AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: Oregon Patient Safety Commission: AHRQ has accepted a...

  15. 76 FR 9350 - Patient Safety Organizations: Voluntary Delisting From Rocky Mountain Patient Safety Organization

    Science.gov (United States)

    2011-02-17

    ... HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary Delisting From Rocky Mountain Patient Safety Organization AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION: Notice of Delisting. SUMMARY: Rocky Mountain Patient Safety Organization: AHRQ has...

  16. 78 FR 40146 - Patient Safety Organizations: Voluntary Relinquishment From Northern Metropolitan Patient Safety...

    Science.gov (United States)

    2013-07-03

    ... HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary Relinquishment From Northern Metropolitan Patient Safety Institute AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION: Notice of Delisting. SUMMARY: The Patient Safety and Quality Improvement Act...

  17. An assessment of traffic safety culture related to engagement efforts to improve traffic safety : research programs.

    Science.gov (United States)

    2016-12-01

    The Center for Health and Safety Culture at Montana State University developed a survey to investigate the traffic safety culture related to engagement in traffic safety citizenship behaviors. The development of the survey was based on an augmented f...

  18. Gas Cylinder Safety, Course 9518

    Energy Technology Data Exchange (ETDEWEB)

    Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-27

    This course, Gas Cylinder Safety (#9518), presents an overview of the hazards and controls associated with handling, storing, using, and transporting gas cylinders. Standard components and markings of gas cylinders are also presented, as well as the process for the procurement, delivery, and return of gas cylinders at Los Alamos National Laboratory (LANL).

  19. Occupational health and safety services

    NARCIS (Netherlands)

    Kwantes, J.H.; Hooftman, W.; Michiel, F.

    2014-01-01

    The position, role and aim of the protective and preventive services (article 7 of the Framework directive (89/391/EEC within the legal OSH-system will be the focus point of this article. Article 13 of the EU Treaty gives the EU the possibility to draft a legal framework on occupational safety and

  20. EDITORIAL ROAD SAFETY IN KENYA

    African Journals Online (AJOL)

    Unfortunately, road safety trends in Kenya are worsening. The mean annual fatality rate from all road traffic accidents in Kenya is estimated at 50 deaths per 10 000 registered vehicles (1,2). The numbers of reported accidents have been showing an increasing trend from 10,300 in 1990 to 16,800 in 2000 and. 17,400 in ...

  1. Va-Room: Motorcycle Safety.

    Science.gov (United States)

    Keller, Rosanne

    One of a series of instructional materials produced by the Literacy Council of Alaska, this booklet provides information about motorcycle safety. Using a simplified vocabulary and shorter sentences, it offers statistics concerning motorcycle accidents; information on how to choose the proper machine; basic information about the operation of the…

  2. School Safety Concerns All Students.

    Science.gov (United States)

    Henderson, Megan

    1999-01-01

    Suggests that school safety is an issue that concerns all students. Discusses how the staff of the Rockwood South (Missouri) "RAMpage" covered the shootings at Columbine High School in a 14-page issue and in follow-up issues. Suggests that the student newspaper covered the controversial topic in an appropriate, tasteful manner. (RS)

  3. Safety barriers and lighting columns.

    NARCIS (Netherlands)

    Schreuder, D.A.

    1972-01-01

    Problems arising from the sitting of lighting columns on the central reserve are reviewed, and remedial measures such as break-away lighting supports and installation of safety fences on the central reserve on both sides of the lighting columns are examined.

  4. Smoking and Home Fire Safety

    Science.gov (United States)

    ... Facebook Twitter Facebook Twitter MP4 1.9 MB Stock photography Use our free high-resolution photos to customize your materials and help spread the word in your community about smoking and fire safety. Fire Prevention and Public Education Exchange The Exchange is a collection of national, state ...

  5. Food quality and safety management

    Directory of Open Access Journals (Sweden)

    Agnieszka Bilska

    2014-09-01

    Full Text Available Ensuring quality and safety of food are nowadays the most important goals set by companies who produce and distribute it. As a result, regulations have been introduced in the European Union countries concerning the production and distribution of food as well as norms which oblige companies to implement and execute several quality management systems.

  6. Ageing and occupational safety (abstract)

    NARCIS (Netherlands)

    Venema, A.; Vroome, E.M.M. de

    2008-01-01

    Session 09: New work environment. The aim of this article is to look into the possible effects of an ageing workforce on occupational safety in the Netherlands, and to use this information to draw conclusions about effective age-related staff policy. The article analyzes data on occupational

  7. Glue Guns: Aiming for Safety

    Science.gov (United States)

    Roy, Ken

    2010-01-01

    While glue guns are very useful, there are safety issues. Regardless of the temperature setting, glue guns can burn skin. The teacher should demonstrate and supervise the use of glue guns and have a plan should a student get burned. There should be an initial first aid protocol in place, followed by a visit to the school nurse. An accident report…

  8. Food Safety Information RSS feed

    Data.gov (United States)

    U.S. Department of Health & Human Services — This is an RSS Feed of Food Safety information that’s produced in real-time by the CDC. This RSS feed is the integration of two other XML feeds, one from the USDA's...

  9. Safety in the headlines again

    CERN Multimedia

    Association du personnel

    2006-01-01

    From the moment the current Management took up office, the Staff Association expressed its concerns about a certain number of Safety issues at CERN. Amongst others, the lack of resources and insufficient information given to the staff on the subject was already giving us cause for concern at the time.

  10. Safety First: Preventing Allergic Reactions

    Science.gov (United States)

    Roy, Ken

    2015-01-01

    All elementary teachers should be aware of their students' allergies especially when they are planning to use plants or animals in the classroom or interacting with them in the field. This knowledge is essential because allergy symptoms can range from an itchy rash to anaphylactic shock. This column shares safety information for the science…

  11. The Schoolchild Street Food Safety

    OpenAIRE

    Febry, Fatmalina

    2011-01-01

    Most of child's school street food do not meet health requirements and very risky to biological or chemical contamination. Street food found to contain a prohibited food additives such as borax, formalin, and dyes Rhodamin B. Therefore, the schoolchild street food safety is one of public health problem that needs serious attention, consistent and addressed jointly by the various parties.

  12. Digital literacy and safety skills

    NARCIS (Netherlands)

    Sonck, N.; Livingstone, S.; Kuiper, E.; de Haan, J.

    2011-01-01

    Children’s digital skills were assessed by asking 25,000 European 9-16 year old internet users about their online activities, skills and self-efficacy. The range of digital skills and online activities are linked. But many younger (11-13 year old) children lack key critical and safety skills. Also,

  13. Food Safety, Farm to Fork.

    Science.gov (United States)

    Jones, Rebecca

    1998-01-01

    In response to growing threat of food-borne illness, the federal government launched the Food Safety Initiative. A key element is the Hazard Analysis Critical Control Points system (HACCP), designed to make everyone in the food-delivery chain responsible for ensuring a safe food supply. The Food and Drug Administration also announced a beef…

  14. Understanding and Exploring Safety Culture

    NARCIS (Netherlands)

    Guldenmund, F.W.

    2010-01-01

    The match between safety and culture was made around 1986, when the INSAG delivered its initial report on the Chernobyl accident. Whether the marriage is a happy one is still a matter of debate, but it is most definitely a fruitful one. In the past twenty years, many researchers have devoted much

  15. [Patient safety in management contracts].

    Science.gov (United States)

    Campillo-Artero, C

    2012-01-01

    Patient safety is becoming commonplace in management contracts. Since our experience in patient safety still falls short of other clinical areas, it is advisable to review some of its characteristics in order to improve its inclusion in these contracts. In this paper opinions and recommendations concerning the design and review of contractual clauses on safety are given, as well as reflections drawn from methodological papers and informal opinions of clinicians, who are most familiar with the nuances of safe and unsafe practices. After reviewing some features of these contracts, criteria for prioritizing and including safety objectives and activities in them, and key points for their evaluation are described. The need to replace isolated activities by systemic and multifaceted ones is emphasized. Errors, limitations and improvement opportunities observed when contracts are linked to indicators, information and adverse event reporting systems are analysed. Finally, the influence of the rules of the game, and clinicians behaviour are emphasised. Copyright © 2011 SECA. Published by Elsevier Espana. All rights reserved.

  16. Staying Secure for School Safety

    Science.gov (United States)

    Youngkin, Minu

    2012-01-01

    Proper planning and preventive maintenance can increase school security and return on investment. Preventive maintenance begins with planning. Through careful planning, education institutions can determine what is working and if any equipment, hardware or software needs to be replaced or upgraded. When reviewing a school's safety and security…

  17. DEINVENTORY THE CRITICALITY SAFETY ENDGAME

    Energy Technology Data Exchange (ETDEWEB)

    ROGERS, C.A.

    2005-03-15

    Criticality safety begins with the design and evaluation of a fissionable material operation and continues even after the operation has been shut down. An interest in criticality safety is maintained until all fissionable material has been removed. This paper examines the process of removing fissionable material with the goal of no longer requiring criticality safety control. The word ''de-inventory'' (usually written deinventory) was coined at the Plutonium Finishing Plant on the Hanford Atomic Reservation to describe this process. The cleanout of gloveboxes at the Plutonium Finishing Plant illustrates typical deinventory operations. Although tanks may have been previously drained of their solutions, residual contents remain for which the plutonium content must be estimated. Normally, this is accomplished using Non-Destructive Assay (NDA) techniques that require conservative correction factors to compensate for tank wall shielding apparatus geometry, fissile material distribution, detector efficiencies, and detector locations. The plutonium inventory is usually overestimated. A Kickoff Meeting is held to review planned operations. Then a criticality safety evaluation of the operations is written, and limits and controls are established. In practice, an evaluation may turn out to be significantly more difficult than it at first appeared, primarily due to uncertainties in the quantity and distribution of the residual plutonium and liquid. The evaluation process can sometimes be streamlined by taking advantage of similarities in design, plutonium inventory, and operations to a glovebox previously evaluated. If an existing Criticality Safety Evaluation Report (CSER) can be shown to bound the new operations, it may be used as the basis for establishing limits and controls for the new operations. Otherwise, a new CSER must be completed and approved.

  18. Official communication of the Safety Commission

    CERN Multimedia

    DG Unit

    2009-01-01

    The Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of 2 April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

  19. Official communication of the Safety Commission

    CERN Multimedia

    DG Unit

    2009-01-01

    We, the Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of the 2nd April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

  20. A UNIVERSITY HOSPITAL PRACTISE: IS THERE ANY RELATIONSHIP BETWEEN WORKPLACE SAFETY AND PATIENT SAFETY

    Directory of Open Access Journals (Sweden)

    Ali Talip AKPINAR

    2017-09-01

    Full Text Available This study investigates the relationship between workplace safety perceptions and patient safety perceptions of hospital staff . Along with job safety decrease, occupational accidents, occupational diseases increase and this may lead to detrimental consequences. Besides, Patient safety is one of the most important factors affecting the quality of health care provided in hospitals. In this study, a survey study containing Hayes’ workplace safety scale and generally consisting of statements that measure the perception of patient safety was conducted to the employees of Research and Application Hospital of Kocaeli University. it is found out that there are statistically significant relationship between patient safety the workplace job safety dimensions. It is also revealed that Patient Safety has statistically significant positive relationship among Supervisor Safety (0,250, job Safety (0,216, job Safety Policies (0,283, Safe Work Environment (0,299 and Improving Job Safety (0,313, respectively. In other words, as the supervisor safety, job safety, job safety policies, safe work environment and improving job safety increase perceptions of patient safety in hospitals increase as well.

  1. Safety in the Chemical Laboratory: Fire Safety and Fire Control in the Chemistry Laboratory.

    Science.gov (United States)

    Wilbraham, A. C.

    1979-01-01

    Discusses fire safety and fire control in the chemistry laboratory. The combustion process, extinguishing equipment, extinguisher maintenance and location, and fire safety and practices are included. (HM)

  2. 75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

    Science.gov (United States)

    2010-12-09

    ..., and 571 Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY... passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle equipment...

  3. Identifying organizational cultures that promote patient safety.

    Science.gov (United States)

    Singer, Sara J; Falwell, Alyson; Gaba, David M; Meterko, Mark; Rosen, Amy; Hartmann, Christine W; Baker, Laurence

    2009-01-01

    Safety climate refers to shared perceptions of what an organization is like with regard to safety, whereas safety culture refers to employees' fundamental ideology and orientation and explains why safety is pursued in the manner exhibited within a particular organization. Although research has sought to identify opportunities for improving safety outcomes by studying patterns of variation in safety climate, few empirical studies have examined the impact of organizational characteristics such as culture on hospital safety climate. This study explored how aspects of general organizational culture relate to hospital patient safety climate. In a stratified sample of 92 U.S. hospitals, we sampled 100% of senior managers and physicians and 10% of other hospital workers. The Patient Safety Climate in Healthcare Organizations and the Zammuto and Krakower organizational culture surveys measured safety climate and group, entrepreneurial, hierarchical, and production orientation of hospitals' culture, respectively. We administered safety climate surveys to 18,361 personnel and organizational culture surveys to a 5,894 random subsample between March 2004 and May 2005. Secondary data came from the 2004 American Hospital Association Annual Hospital Survey and Dun & Bradstreet. Hierarchical linear regressions assessed relationships between organizational culture and safety climate measures. Aspects of general organizational culture were strongly related to safety climate. A higher level of group culture correlated with a higher level of safety climate, but more hierarchical culture was associated with lower safety climate. Aspects of organizational culture accounted for more than threefold improvement in measures of model fit compared with models with controls alone. A mix of culture types, emphasizing group culture, seemed optimal for safety climate. Safety climate and organizational culture are positively related. Results support strategies that promote group orientation and

  4. Safety climate practice in Korean manufacturing industry.

    Science.gov (United States)

    Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

    2008-11-15

    Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

  5. Watershed safety and quality control by safety threshold method

    Science.gov (United States)

    Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

    2014-05-01

    Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

  6. Safety Training: Access rights underground and safety training

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    This is to remind all CERN Group Leaders/GLIMOS of their obligation to ensure that members of their group/experiment or personnel belonging to firms holding contracts under their responsibility have received the necessary training/instruction in safety before start of work. Access underground will only be authorized upon attendance at safety courses level 1, 2 and 3, provided by the CERN Fire Brigade. All persons not having attended these courses will be locked out. All individuals concerned, as well as their Group Leaders/GLIMOS should check the access rights of their staff at the URL: https://hrt.cern.ch/servlet/cern.hrt.Access.Access In case you or your collaborators do not have the requested authorisation, you/they must attend the safety courses provided every Tuesday by the Fire Brigade or the additional courses on: 16 June, course given in French, 9 a.m. - 12 a.m., AB Auditorium I (Bldg. 6/2-024), 17 June, course given in English, 2 p.m. - 5 p.m., AB Auditorium I (Bldg. 6/2-024). Formation en SEC...

  7. The effect of safety climate on seafarers' safety behaviors in container shipping.

    Science.gov (United States)

    Lu, Chin-Shan; Tsai, Chaur-Luh

    2010-11-01

    This study empirically examined safety climate and its effects on safety behaviors from seafarers' perceptions in the container shipping context. Research hypotheses were formulated and tested using survey data collected from 608 seafarers working on 124 vessels belonging to 13 of the top 20 global container carriers. A structural equation model was used to examine the effect of safety climate dimensions, namely, safety policy, perceived supervisor safety behavior, and safety management, on safety behavior. The results revealed a positive association between safety climate and seafarers' safety behavior. The contribution of the study findings to the development of safety climate theory and their managerial implications for vessel safety in shipping operations are discussed. 2010 Elsevier Ltd. All rights reserved.

  8. Another look at safety climate and safety behavior: deepening the cognitive and social mediator mechanisms.

    Science.gov (United States)

    Fugas, Carla S; Silva, Sílvia A; Meliá, José L

    2012-03-01

    In this study, safety climate literature and the theory of planned behavior were combined to explore the cognitive and social mechanisms that mediate the relationship between organizational safety climate and compliance and proactive safety behaviors. The sample consisted of 356 workers from a transportation organization. Using a multiple mediation design, the results revealed that proactive and compliance safety behaviors are explained by different patterns of combinations of individual and situational factors related to safety. On the one hand, the relationship between organizational safety climate and proactive safety behaviors was mediated by coworkers' descriptive norms and attitudes toward safety. On the other hand, supervisors' injunctive safety norms and perceived behavioral control were the mediator variables between organizational safety climate and compliance safety behaviors. Theoretical and practical implications of the findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. SEISMIC ANALYSIS FOR PRECLOSURE SAFETY

    Energy Technology Data Exchange (ETDEWEB)

    E.N. Lindner

    2004-12-03

    The purpose of this seismic preclosure safety analysis is to identify the potential seismically-initiated event sequences associated with preclosure operations of the repository at Yucca Mountain and assign appropriate design bases to provide assurance of achieving the performance objectives specified in the Code of Federal Regulations (CFR) 10 CFR Part 63 for radiological consequences. This seismic preclosure safety analysis is performed in support of the License Application for the Yucca Mountain Project. In more detail, this analysis identifies the systems, structures, and components (SSCs) that are subject to seismic design bases. This analysis assigns one of two design basis ground motion (DBGM) levels, DBGM-1 or DBGM-2, to SSCs important to safety (ITS) that are credited in the prevention or mitigation of seismically-initiated event sequences. An application of seismic margins approach is also demonstrated for SSCs assigned to DBGM-2 by showing a high confidence of a low probability of failure at a higher ground acceleration value, termed a beyond-design basis ground motion (BDBGM) level. The objective of this analysis is to meet the performance requirements of 10 CFR 63.111(a) and 10 CFR 63.111(b) for offsite and worker doses. The results of this calculation are used as inputs to the following: (1) A classification analysis of SSCs ITS by identifying potential seismically-initiated failures (loss of safety function) that could lead to undesired consequences; (2) An assignment of either DBGM-1 or DBGM-2 to each SSC ITS credited in the prevention or mitigation of a seismically-initiated event sequence; and (3) A nuclear safety design basis report that will state the seismic design requirements that are credited in this analysis. The present analysis reflects the design information available as of October 2004 and is considered preliminary. The evolving design of the repository will be re-evaluated periodically to ensure that seismic hazards are properly

  10. Safety Plan : Mingo National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Mingo NWR Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify and correct unsafe...

  11. Tighter Safety Rules Ahead for Academic Labs

    Science.gov (United States)

    Long, Janice R.

    1975-01-01

    Indicates that specific laboratory standards for handling chemical carcinogens should become law in the near future. Small colleges and universities may have financial trouble in complying with laboratory safety standards investigated by the Occupational Safety and Health Administration. (GS)

  12. Manpower analysis in transportation safety. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, C.S.; Bowden, H.M.; Colford, C.A.; DeFilipps, P.J.; Dennis, J.D.; Ehlert, A.K.; Popkin, H.A.; Schrader, G.F.; Smith, Q.N.

    1977-05-01

    The project described provides a manpower review of national, state and local needs for safety skills, and projects future manning levels for transportation safety personnel in both the public and private sectors. Survey information revealed that there are currently approximately 121,000 persons employed directly in transportation safety occupations within the air carrier, highway and traffic safety, motor carrier, pipeline, rail carrier, and marine carrier transportation industry groups. The projected need for 1980 is over 145,000 of which over 80 percent will be in highway safety. An analysis of transportation tasks is included, and shows ten general categories about which the majority of safety activities are focused. A skills analysis shows a generally high level of educational background and several years of experience are required for most transportation safety jobs. An overall review of safety programs in the transportation industry is included, together with chapters on the individual transportation modes.

  13. Comparative cardiovascular safety of dementia medications

    DEFF Research Database (Denmark)

    Fosbøl, Emil L; Peterson, Eric D; Holm, Ellen

    2012-01-01

    To compare the cardiovascular safety of currently marketed dementia medications in new users in the United States and Denmark.......To compare the cardiovascular safety of currently marketed dementia medications in new users in the United States and Denmark....

  14. Food Safety When Preparing Holiday Meals

    Science.gov (United States)

    ... Health Home Department of Public Health Current: Remember Food Safety when Preparing Holiday Meals Services and Programs Regulation & ... of Public Health (DPH) reminds Connecticut residents that food safety is especially important as they prepare holiday meals. ...

  15. Agassiz National Wildlife Refuge : Safety Management Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objectives of this Safety Management Plan are to identify and define safety hazards that may be encountered on Agassiz Refuge and the procedures to be followed...

  16. High Altitude Cooking and Food Safety

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices Careers ... 286) Actions ${title} Loading... High Altitude Cooking and Food Safety What is considered a high altitude? How is ...

  17. Validation of Battery Safety for Space Missions

    Science.gov (United States)

    Jeevarajan, Judith

    2012-01-01

    Presentation covers: (1) Safety Certification Process at NASA (2) Safety Testing for Lithium-ion Batteries (3) Limitations Observed with Li-ion Batteries in High Voltage and High Capacity Configurations.

  18. Safety issues involving marine containers on chassis.

    Science.gov (United States)

    2009-01-01

    This study performed by The University of Tennessee investigated safety related problems involving chassis used for transporting marine containers on US highways. In recent years, much concern has arisen regarding the safety implications of allegedly...

  19. Safety for Your Child: 10 Years

    Science.gov (United States)

    ... Stages Listen Español Text Size Email Print Share Safety for Your Child: 10 Years Page Content Article ... out if your child's friends carry guns. Sports Safety At this age your child may be playing ...

  20. Adapting safety requirements analysis to intrusion detection

    Science.gov (United States)

    Lutz, R.

    2001-01-01

    Several requirements analysis techniques widely used in safety-critical systems are being adapted to support the analysis of secure systems. Perhaps the most relevant system safety techique for Intrusion Detection Systems is hazard analysis.

  1. Food Safety While Hiking, Camping and Boating

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices ... Web Content Viewer (JSR 286) Actions ${title} Loading... Food Safety While Hiking, Camping & Boating Outdoor activities are ...

  2. Food Safety Tips for College Students

    Science.gov (United States)

    ... Standard Forms FSIS United States Department of Agriculture Food Safety and Inspection Service About FSIS District Offices ... Web Content Viewer (JSR 286) Actions ${title} Loading... Food Safety Tips for College Students When students pack ...

  3. Optimization of safety on pavement preservation projects.

    Science.gov (United States)

    2011-01-01

    To achieve a goal of reducing highway crash fatalities by 4% each year to improve roadway safety, the Georgia Department of Transportation (GDOT) is actively seeking opportunities to incorporate safety improvements into its current pavement preservat...

  4. Safety Plan : Muscatatuck National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Muscatatuck NWR Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify and correct unsafe...

  5. Calhoun National Wildlife Refuge : Safety Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Calhoun NWR Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify and correct unsafe...

  6. Chautauqua National Wildlife Refuge : Safety Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Chautauqua National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify...

  7. Safety Plan : Pocosin Lakes National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Pocosin Lakes National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to...

  8. Eufaula National Wildlife Refuge : Station Safety Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Eufaula National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify and...

  9. Safety Plan: Necedah National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Necedah NWR Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify and correct unsafe...

  10. [Station Safety Plan: Louisa National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Louisa National Wildlife Refuge Safety plan discusses policies for the safety of the station employees, volunteers and public. This plan seeks to identify and...

  11. Safety Plan : Trempaleau National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Trempealeau National Wildlife Refuge Safety Plan discusses policies for the safety of the station employees, volunteers, and public. This plan seeks to identify...

  12. Medication safety during your hospital stay

    Science.gov (United States)

    Five-rights - medication; Medication administration - hospital; Medical errors - medication; Patient safety - medication safety ... means there is less chance of a medicine error with electronic prescriptions. Your doctor can tell your nurse to write ...

  13. Nuclear safety in crisis regions

    Energy Technology Data Exchange (ETDEWEB)

    Ustohalova, Veronika; Englert, Matthias

    2017-04-12

    The use of nuclear energy demands extensive institutional and material infrastructure upon a foundation of stable intrastate conditions and interstate relations. Conflicts can result in catastrophic accidents, either deliberately or unintentionally. If there are nuclear facilities located in a crisis region, the risk of a nuclear disaster is markedly heightened. This can be explained not only in terms of the strategic relevance of the energy supply in military conflicts, but also the increased accident risks and hazards arising from collateral damage, as well as the erosion of the safety culture and institutional control in crisis regions with a nuclear infrastructure. Even just the escalation of a political dispute or the persistence of low intensity conflicts can make it generally more difficult and complex to maintain nuclear safety, if intrastate safety mechanisms come under strain or even fail as a result. So far no instance of military escalation, past or present, has led to an accident in a civil nuclear facility. Nevertheless, questions are clearly raised about the vulnerability of nuclear facilities in crisis regions and the risks associated with this vulnerability. Despite the potentially far-reaching consequences, too little attention is currently being paid to the linkage between intra- and interstate conflicts and the safety of nuclear facilities in crisis regions. The aim of the research presented here was to explore this theme and, after laying the groundwork in this manner, to raise awareness among policy-makers and the wider public. In this context the escalation of conflicts in the Ukraine is a particular focus. The first part of the report begins with a systematic look at the link between crisis regions and/or conflicts and nuclear safety. The various impact pathways relating to nuclear facility safety and the associated risks are described in relation to potential hazards induced by crises and wars. A nuclear facility can itself become a theatre

  14. Functional Safety Specification of Communication Profile PROFIsafe

    Directory of Open Access Journals (Sweden)

    Jan Rofar

    2006-01-01

    Full Text Available Paper maps the trends in area of safety-related communication within PROFIBUS and PROFINET industry networks. There are analyses safety measures and Fail-safe parameters of PROFIsafe profile in version V2 and their localisation in Safety Communication Layer SCL, which guarantees Safety Integrity Level SIL according to standard IEC 61508. The last chapter analyses the reaction in the event of fault during transmission of messages.

  15. New Safety rule for Chemical Agents

    CERN Multimedia

    Safety Commission

    2010-01-01

    The following Safety rule has been issued on 08-01-2010: Safety Regulation SR-C Chemical Agents This document applies to all persons under the Director General’s authority. It sets out the minimal requirements for the protection of persons from risks to their safety and health arising, or likely to arise, from the effects of hazardous chemical agents used in any CERN activity. All Safety rules are available on the web pages.

  16. Safety Day Prize Competition: results and answers

    CERN Multimedia

    HSE Unit

    2014-01-01

    The three winners of the Safety Day Prize Competition are...   • 1st Prize: Fernando LEITE PEREIRA – smoke detector • 2nd Prize: Thomas DE BORTOLI – water filter jug • 3rd Prize: Matti KALLIOKOSKI – safety goggles Please see the image below for the answers to the questionnaire. If you have any questions regarding the Safety Day, please contact: safety.communication@cern.ch. And again, thank you to all the participants!

  17. CERN Safety System Monitoring - SSM

    CERN Document Server

    Hakulinen, T; Valentini, F; Gonzalez, J; Salatko-Petryszcze, C

    2011-01-01

    CERN SSM (Safety System Monitoring) [1] is a system for monitoring state-of-health of the various access and safety systems of the CERN site and accelerator infrastructure. The emphasis of SSM is on the needs of maintenance and system operation with the aim of providing an independent and reliable verification path of the basic operational parameters of each system. Included are all network-connected devices, such as PLCs, servers, panel displays, operator posts, etc. The basic monitoring engine of SSM is a freely available system-monitoring framework Zabbix [2], on top of which a simplified traffic-light-type web-interface has been built. The web-interface of SSM is designed to be ultra-light to facilitate access from handheld devices over slow connections. The underlying Zabbix system offers history and notification mechanisms typical of advanced monitoring systems.

  18. Safety Case for Service Contracts

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Israel L.

    2014-07-01

    Safety cases developed for the Facilities Management and Operations Center (FMOC) are based on the requirements in MN471021, Work Planning and Control Criteria for Safe Design and Operations. The FMOC performs maintenance activities in various locations at Sandia National Laboratories, New Mexico (SNL/NM). SNL/NM consists of more than 6,000,000 square feet of buildings, structures, and site infrastructure on approximately 13,000 acres of land. The FMOC performs approximately 7500 service contract work orders a year to assist with operations and maintenance at the SNL/NM site and facilities. As part of the continual improvement process, this Safety Case will be reviewed and updated, as needed, or at a minimum every three years.

  19. Can we Improve Patient Safety?

    Directory of Open Access Journals (Sweden)

    Martin Thomas Corbally

    2014-09-01

    Full Text Available Despite greater awareness of patient safety issues especially in the operating room and the widespread implementation of surgical time out (WHO,errors, especially wrong site surgery, continue. Most such errors are due to lapses in communication where decision makers fail to consult or confirm operative findings but worryingly where parental concerns over the planned procedure are ignored or not followed through. The WHO surgical pause / Time Out aims to capture these errors and prevent them but the combination of human error and complex hospital environments can overwhelm even robust safety structures and simple common sense. Parents are the ultimate repository of information on their child's condition and planned surgery but are traditionally excluded from the process of Surgical pause and Time Out perhaps to avoid additional stress. In addition surgeons, like pilots, are subject to the phenomenon of plan continue fail with potentially disastrous outcomes.

  20. Safety considerations in MR imaging

    Energy Technology Data Exchange (ETDEWEB)

    Kanal, E.; Shellock, F.G.; Talagala, L. (Univ. of Pittsburgh, PA (USA))

    1990-09-01

    The authors identify eight areas of potential safety concern during clinical magnetic resonance (MR) imaging. These include (a) biologic effects of the static magnetic field; (b) ferromagnetic attractive projectile effects of the static magnetic field; (c) potential effects of the relatively slowly time-varying magnetic field gradients; (d) effects of the rapidly varying radio-frequency (RF) magnetic fields, including RF power deposition concerns; (e) auditory considerations from noise caused by the rapidly pulsed magnetic field gradients; (f) safety considerations concerning superconductive systems, including quenches, use of cryogens, and cryogen storage and handling; (g) psychological effects, such as claustrophobia and anxiety induced because of the examination; and (h) possible effects of the intravenous use of the MR contrast agent gadopentetate dimeglumine. The concerns in each of these categories are elaborated upon, and the available data are presented to clarify their status.155 references.

  1. Chemical Hygiene and Safety Plan

    Energy Technology Data Exchange (ETDEWEB)

    Berkner, K.

    1992-08-01

    The objective of this Chemical Hygiene and Safety Plan (CHSP) is to provide specific guidance to all LBL employees and contractors who use hazardous chemicals. This Plan, when implemented, fulfills the requirements of both the Federal OSHA Laboratory Standard (29 CFR 1910.1450) for laboratory workers, and the Federal OSHA Hazard Communication Standard (29 CFR 1910.1200) for non-laboratory operations (e.g., shops). It sets forth safety procedures and describes how LBL employees are informed about the potential chemical hazards in their work areas so they can avoid harmful exposures and safeguard their health. Generally, communication of this Plan will occur through training and the Plan will serve as a the framework and reference guide for that training.

  2. One health and food safety

    DEFF Research Database (Denmark)

    Wielinga, Peter; Schlundt, Jørgen

    2014-01-01

    Many, if not most, of all important zoonoses relate in some way to animals in the food production chain. Therefore food becomes an important vehicle for many zoonotic pathogens. One of the major issues in food safety over the latest decades has been the lack of cross-sectoral collaboration across...... the food production chain. Major food safety events have been significantly affected by the lack of collaboration between the animal health, the food control, and the human health sector. One Health formulates clearly both the need for, and the benefit of cross-sectoral collaboration. Here we will focus...... on the human health risk related to zoonotic microorganisms present both in food animals and food derived from these animals, and typically transmitted to humans through food. Some diseases have global epidemic- or pandemic-potential, resulting in dramatic action from international organizations and national...

  3. Safety in the Transport Sector

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2012-01-01

    of violence and robbery. The transport branch is characterized by many small enterprises of which 97% of the enterprises in Denmark have less than 50 employees and 89% have less than 10 employees. The intervention in 5 small enterprises show a relevant focus on both the risk for occupational accidents...... but also the risk of accidents that have consequences for the cars and the deliveries to customers. A calculation of the internal costs of compensation of all damages and injuries shows an amount that covers 20–100% of the enterprises profit for a year. The intervention in the enterprises...... is a simplification of safety management methods but adjusted into a new focus and awareness for the managers of small enterprises. What really matters is to teach the managers to manage and focus on both safety and quality connected with time schedules and costs...

  4. Volcanic hazards and aviation safety

    Science.gov (United States)

    Casadevall, Thomas J.; Thompson, Theodore B.; Ewert, John W.; ,

    1996-01-01

    An aeronautical chart was developed to determine the relative proximity of volcanoes or ash clouds to the airports and flight corridors that may be affected by volcanic debris. The map aims to inform and increase awareness about the close spatial relationship between volcanoes and aviation operations. It shows the locations of the active volcanoes together with selected aeronautical navigation aids and great-circle routes. The map mitigates the threat that volcanic hazards pose to aircraft and improves aviation safety.

  5. FOOD SAFETY IN CATERING INDUSTRY

    Directory of Open Access Journals (Sweden)

    P. Cattaneo

    2009-03-01

    Full Text Available Catering industry plays a very important role in public health management, because about 30% of total daily meals are consumed in catering industry (restaurants, bar. In this work food safety was evaluated in 20 catering centres throughout microbiological analyses of different categories of meals. Results demonstrate that there was an important decrease of microbial contamination between 2006 and 2007, no pathogens were found in 217 samples examined: this was obtained by improving voluntary controls.

  6. Firefighter Safety for PV Systems

    DEFF Research Database (Denmark)

    Mathe, Laszlo; Sera, Dezso; Spataru, Sergiu

    2015-01-01

    An important and highly discussed safety issue for photovoltaic (PV) systems is that as long as the PV panels are illuminated, a high voltage is present at the PV string terminals and cables between the string and inverters that is independent of the state of the inverter's dc disconnection switch....... The presence of these energized conductors on the dc side of the PV system can pose a danger to anyone performing maintenance or firefighting....

  7. Nanotechnology Safety Self-Study

    Energy Technology Data Exchange (ETDEWEB)

    Grogin, Phillip W. [Los Alamos National Laboratory

    2016-03-29

    Nanoparticles are near-atomic scale structures between 1 and 100 nanometers (one billionth of a meter). Engineered nanoparticles are intentionally created and are used in research and development at Sandia National Laboratories (SNL) and Los Alamos National Laboratory (LANL). This course, Nanotechnology Safety Self-Study, presents an overview of the hazards, controls, and uncertainties associated with the use of unbound engineered nanoscale particles (UNP) in a laboratory environment.

  8. Zagazig Journal of Occupational Health and Safety

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and environmental health and safety. The field is devoted to the diagnosis, prevention, management and scientific analysis of occupational , environmental and safety health problems; ...

  9. 31 CFR 560.528 - Aircraft safety.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Aircraft safety. 560.528 Section 560..., Authorizations and Statements of Licensing Policy § 560.528 Aircraft safety. Specific licenses may be issued on a... the safety of civil aviation and safe operation of U.S.-origin commercial passenger aircraft. ...

  10. 45 CFR 1310.21 - Safety education.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Safety education. 1310.21 Section 1310.21 Public... PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.21 Safety education. (a) Each agency must... children. The required transportation and pedestrian safety education of children and parents, except for...

  11. Factors Impacting Food Safety Risk Perceptions

    NARCIS (Netherlands)

    Tonsor, G.T.; Schroeder, T.C.; Pennings, J.M.E.

    2009-01-01

    We developed and applied a model of consumer risk perceptions of beef food safety to better understand the underlying drivers of consumer demand for food safety. We show how consumer demographics, country-of-residence, as well as reliance on, and trust in, alternative food safety information sources

  12. 76 FR 14592 - Safety Management System; Withdrawal

    Science.gov (United States)

    2011-03-17

    ... in response to the ANPRM. The comment period closed on October 21, 2009. The Airline Safety and..., and 145 RIN 2120-AJ15 Safety Management System; Withdrawal AGENCY: Federal Aviation Administration... (``product/ service providers'') to develop a Safety Management System (SMS). The FAA is withdrawing the...

  13. 46 CFR 169.723 - Safety belts.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Safety belts. 169.723 Section 169.723 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.723 Safety belts. Each vessel must carry a harness type safety belt conforming to Offshore Racing Council (ORC) standards for each person on watch or...

  14. Safety training: places available in September 2014

    CERN Multimedia

    HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   Please note that there are 7 places left on the “Territorial Safety Officer (TSO) – Initial” course on September 23-25, 2014 (in French).

  15. Food Safety for People with Diabetes

    Science.gov (United States)

    ... Action Plan .........................................................................17 For More Information on Food Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Additional Food Safety Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Check out the handy Check ... Foods: If you are not sure about the safety of a food in your refrigerator, don’t take therisk. When ...

  16. Chemical Safety Vulnerability Working Group Report

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This report marks the culmination of a 4-month review conducted to identify chemical safety vulnerabilities existing at DOE facilities. This review is an integral part of DOE's efforts to raise its commitment to chemical safety to the same level as that for nuclear safety.

  17. 14 CFR 431.33 - Safety organization.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

  18. 14 CFR 415.33 - Safety organization.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

  19. Patient safety culture in primary care

    NARCIS (Netherlands)

    Verbakel, N.J.

    2015-01-01

    Background A constructive patient safety culture is a main prerequisite for patient safety and improvement initiatives. Until now, patient safety culture (PSC) research was mainly focused on hospital care, however, it is of equal importance in primary care. Measuring PSC informs practices on their

  20. KNOWLEDGE AND PRACTICE OF INJECTION SAFETY AMONG ...

    African Journals Online (AJOL)

    conducted to assess the knowledge and practice of injection safety among nurses in UCTH, Calabar using a descriptive research ... revealed that 59.7% of the respondents had good knowledge of injection safety and 66.0% had good practice of injection safety .... and laboratory scientists always used gloves as compared to ...