Patient-Centered Robot-Aided Passive Neurorehabilitation Exercise Based on Safety-Motion Decision-Making Mechanism

Directory of Open Access Journals (Sweden)

Lizheng Pan

2017-01-01

Full Text Available Safety is one of the crucial issues for robot-aided neurorehabilitation exercise. When it comes to the passive rehabilitation training for stroke patients, the existing control strategies are usually just based on position control to carry out the training, and the patient is out of the controller. However, to some extent, the patient should be taken as a “cooperator” of the training activity, and the movement speed and range of the training movement should be dynamically regulated according to the internal or external state of the subject, just as what the therapist does in clinical therapy. This research presents a novel motion control strategy for patient-centered robot-aided passive neurorehabilitation exercise from the point of the safety. The safety-motion decision-making mechanism is developed to online observe and assess the physical state of training impaired-limb and motion performances and regulate the training parameters (motion speed and training rage, ensuring the safety of the supplied rehabilitation exercise. Meanwhile, position-based impedance control is employed to realize the trajectory tracking motion with interactive compliance. Functional experiments and clinical experiments are investigated with a healthy adult and four recruited stroke patients, respectively. The two types of experimental results demonstrate that the suggested control strategy not only serves with safety-motion training but also presents rehabilitation efficacy.

28 CFR 345.83 - Job safety training.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

Conceptual design report, Hazardous Materials Management and Emergency Response (HAMMER) Training Center

Energy Technology Data Exchange (ETDEWEB)

Kelly, K.E. [Westinghouse Hanford Co., Richland, WA (United States)

1994-11-09

For the next 30 years, the main activities at the US Department of Energy (DOE) Hanford Site will involve the management, handling, and cleanup of toxic substances. If the DOE is to meet its high standards of safety, the thousands of workers involved in these activities will need systematic training appropriate to their tasks and the risks associated with these tasks. Furthermore, emergency response for DOE shipments is the primary responsibility of state, tribal, and local governments. A collaborative training initiative with the DOE will strengthen emergency response at the Hanford Site and within the regional communities. Local and international labor has joined the Hazardous Materials Management and Emergency Response (HAMMER) partnership, and will share in the HAMMER Training Center core programs and facilities using their own specialized trainers and training programs. The HAMMER Training Center will provide a centralized regional site dedicated to the training of hazardous material, emergency response, and fire fighting personnel.

Conceptual design report, Hazardous Materials Management and Emergency Response (HAMMER) Training Center

International Nuclear Information System (INIS)

Kelly, K.E.

1994-01-01

For the next 30 years, the main activities at the US Department of Energy (DOE) Hanford Site will involve the management, handling, and cleanup of toxic substances. If the DOE is to meet its high standards of safety, the thousands of workers involved in these activities will need systematic training appropriate to their tasks and the risks associated with these tasks. Furthermore, emergency response for DOE shipments is the primary responsibility of state, tribal, and local governments. A collaborative training initiative with the DOE will strengthen emergency response at the Hanford Site and within the regional communities. Local and international labor has joined the Hazardous Materials Management and Emergency Response (HAMMER) partnership, and will share in the HAMMER Training Center core programs and facilities using their own specialized trainers and training programs. The HAMMER Training Center will provide a centralized regional site dedicated to the training of hazardous material, emergency response, and fire fighting personnel

Workplace Safety and Health Improvements Through a Labor/Management Training and Collaboration

Science.gov (United States)

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2014-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by “OSHA-authorized” members of the International Chemical Workers Union Council who worked at the plant. Merck created a new fulltime position in its Learning and Development Department and hired one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred. PMID:24704812

Workplace safety and health improvements through a labor/management training and collaboration.

Science.gov (United States)

Mahan, Bruce; Morawetz, John; Ruttenberg, Ruth; Workman, Rick

2013-01-01

Seven hundred thirty-nine workers at Merck's Stonewall plant in Elkton, Virginia, have a safer and healthier workplace because four of them were enthusiastic about health and safety training they received from the union's training center in Cincinnati, Ohio. What emerged was not only that all 739 plant employees received OSHA 10-hour General Industry training, but that it was delivered by "OSHA-authorized" members of the International Chemical Workers Union Council who worked at the plant. Merck created a new full-time position in its Learning and Development Department and filled it with one of the four workers who had received the initial training. Strong plant leadership promoted discussions both during the training, in evaluation, and in newly energized joint labor-management meetings following the training. These discussions identified safety and health issues needing attention. Then, in a new spirit of trust and collaboration, major improvements occurred.

Surgical Safety Training of World Health Organization Initiatives.

Science.gov (United States)

Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

2014-01-01

Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

Attitudes of teenagers towards workplace safety training.

Science.gov (United States)

Zierold, Kristina M; Welsh, Erin C; McGeeney, Teresa J

2012-12-01

More than 70 % of teenagers are employed before graduating high school. Every 10 min, in the United States, a young worker is injured on the job. Safety training has been suggested as a way to prevent injuries, yet little is known about the methods of safety training and the effectiveness of training that teens receive at work. This study is the first to assess the attitudes teens hold towards safety training and what they believe would help them stay safe on the job. In 2010, focus groups and interviews were conducted with 42 teens from public high schools in Jefferson County, Kentucky. Participating teens were aged 15-19 years old, 43 % male, 69 % African-American, and 56 % worked either in the restaurant/food industry or in retail jobs. Most teens reported receiving safety training. Although the majority believed that safety training was important, many felt that they personally did not need safety training; that it was "common sense." However, 52 % of teens reported workplace injuries. Many viewed injury lightly and as part of the job, even those that sustained severe injuries. Most teens were trained by methods that seem at best "boring" and at worst, ineffective. Little interaction, action, or repetition is used. Training is not geared towards teens' developmental levels or interest, as in most cases all workers received the same type of training. Safety training may be a powerful way to reduce injury rates among working teenagers, but it is essential that training methods which are geared towards teens are utilized.

Knowledge management: Role of the the Radiation Safety Information Computational Center (RSICC)

Science.gov (United States)

Valentine, Timothy

2017-09-01

The Radiation Safety Information Computational Center (RSICC) at Oak Ridge National Laboratory (ORNL) is an information analysis center that collects, archives, evaluates, synthesizes and distributes information, data and codes that are used in various nuclear technology applications. RSICC retains more than 2,000 software packages that have been provided by code developers from various federal and international agencies. RSICC's customers (scientists, engineers, and students from around the world) obtain access to such computing codes (source and/or executable versions) and processed nuclear data files to promote on-going research, to ensure nuclear and radiological safety, and to advance nuclear technology. The role of such information analysis centers is critical for supporting and sustaining nuclear education and training programs both domestically and internationally, as the majority of RSICC's customers are students attending U.S. universities. Additionally, RSICC operates a secure CLOUD computing system to provide access to sensitive export-controlled modeling and simulation (M&S) tools that support both domestic and international activities. This presentation will provide a general review of RSICC's activities, services, and systems that support knowledge management and education and training in the nuclear field.

Nuclear safety education and training network

International Nuclear Information System (INIS)

Bastos, J.; Ulfkjaer, L.

2004-01-01

In March 2001, the Secretariat convened an Advisory Group on Education and Training in nuclear safety. The Advisory Group considered structure, scope and means related to the implementation of an IAEA Programme on Education and Training . A strategic plan was agreed and the following outputs were envisaged: 1. A Training Support Programme in nuclear safety, including a standardized and harmonized approach for training developed by the IAEA and in use by Member States. 2. National and regional training centres, established to support sustainable national nuclear safety infrastructures. 3. Training material for use by lecturers and students developed by the IAEA in English and translated to other languages. The implementation of the plan was initiated in 2002 emphasizing the preparation of training materials. In 2003 a pilot project for a network on Education and Training in Asia was initiated

The maintenance training center of the paks nuclear power plant - past, present and future

International Nuclear Information System (INIS)

Kiss, I.

2001-01-01

The safety of the Paks nuclear power plant (Paks NPP) is a political-economic factor with general influence on the stability of the Hungarian economy. Since the beginning of the 1990s, the plant management has been taking significant efforts to learn about the factors that define plant safety and to reveal areas where safety can be further improved. Major emphasis is also placed on the provision of resources and creation of conditions necessary for the preservation of staff competence. In 1997 a separate, maintenance-specific facility was erected. The Maintenance Training Center of the Paks NPP is a worldwide major unique center. (orig.) [de

Restaurant supervisor safety training: evaluating a small business training intervention.

Science.gov (United States)

Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

2009-01-01

We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.

Reactor safety training for decision making

International Nuclear Information System (INIS)

Scott, C.K.

2003-01-01

The purpose of this paper is to describe an approach to reactor safety training for technical staff working at an operating station. The concept being developed is that, when the engineer becomes a registered professional engineer, they have sufficient reactor safety knowledge to perform independent technical work without compromising the safety of the plant. This goal would be achieved with a focused training program while working as an engineer-in-training (four years in NB). (author)

Perilaku Kreatif Pekerja Call Center: Peran Komunikasi dan Dukungan Training Center

Directory of Open Access Journals (Sweden)

Nugroho J. Setiadi

2013-11-01

Full Text Available Call center business in Indonesia is growing rapidly worldwide. This condition has had repercussions for a growing number of call center workers needed. They are forced to be more creative in performing their duties. This study aims to determine the role of communication and training center in supporting the creative performance of workers in call centers. The survey was conducted by distributing questionnaires to 100 respondents (employees of the 3 major companies in the field of telecommunication services in Indonesia. Regression analysis was used to analyze the data to examine the role of communication and training support center on creative performance. The results indicated that communication and training support center significantly influence the creative behavior in call center workers. Communication quality shown in the telecommunication service provider companies, such as the media quality, simplicity of information, dissemination of information, loads of information, and accuracy of messages, has shown good quality. In addition, the training program has shown its support for call center workers in the form of program effectiveness through research and data collection, determining the materials, training methods, choosing a coach, preparing facilities, selecting and implementing the program.

Safety Training: a right or an obligation?

CERN Multimedia

HSE Unit

2014-01-01

CERN’s Safety Training programme currently offers around 50 classroom courses and 17 e-learning courses. Although anyone can attend any of these courses, some are compulsory for everyone working at CERN. In particular, “CERN Safety Introduction” and “Safety during LS1” are compulsory for all new arrivals.   The "Self-Rescue Mask" training course. Photo: Christoph Balle. However, depending on the type of activities, the type of workstation, the role you have been assigned (TSO, project leader, etc.) and/or the area where you will be working (e.g. confined spaces), you might be required to follow additional safety training provided by CERN. In accordance with the provisions of the CERN Safety Policy, members of the personnel must keep themselves informed of their obligations in terms of safety training and of the actions they must take to keep up to date. Most training courses are valid for three years, and as they reach the ...

Safety Training: Basic Safety and Access Courses

CERN Multimedia

Antonella Vignes

2005-01-01

Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various existing on-site hazards, and how to recognize and avoid them. Safety course changes The current organization for basic safety courses is changing. There will be two main modifications: the organization of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organizational changes This concerns the existing basic safety training, currently called level1, level2 and level3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, attendees will systematically follow the...

Safety Training: basic safety and access courses

CERN Multimedia

2005-01-01

Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various hazards existing on site, and how to recognise and avoid them. Safety course changes The current organisation of basic safety courses is changing. There will be two main modifications: the organisation of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organisational changes This concerns the existing basic safety training, currently called level 1, level 2 and level 3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, participants will systematically follow...

The Hungarian model project: Strengthening training for operational safety at Paks nuclear power plant

International Nuclear Information System (INIS)

Mautner Markhof, F.

1998-01-01

The Hungarian Model project (HMP) reflects the commitment to constant increase of safety and reliability of the NPP Paks, the Government of Hungary and the IAEA. It includes some of the most important nuclear power objectives of Paks NPP, namely the strengthening of NPP personnel training and competence through the application of international best practice, the systematic approach to training (SAT), for training operation and maintenance personnel; setting up a state of-the-art maintenance training center (MTC) at Paks and enhancing safety culture at Paks NPP. The IAEA supported implementation of the HMP through fellowships and scientific visits, expert missions, provision of hardware and software for SAT application, and supply od major new uncontaminated items of actual WWER equipment for the MTC

Nuclear criticality safety training: guidelines for DOE contractors

International Nuclear Information System (INIS)

Crowell, M.R.

1983-09-01

The DOE Order 5480.1A, Chapter V, Safety of Nuclear Facilities, establishes safety procedures and requirements for DOE nuclear facilities. This guide has been developed as an aid to implementing the Chapter V requirements pertaining to nuclear criticality safety training. The guide outlines relevant conceptual knowledge and demonstrated good practices in job performance. It addresses training program operations requirements in the areas of employee evaluations, employee training records, training program evaluations, and training program records. It also suggests appropriate feedback mechanisms for criticality safety training program improvement. The emphasis is on academic rather than hands-on training. This allows a decoupling of these guidelines from specific facilities. It would be unrealistic to dictate a universal program of training because of the wide variation of operations, levels of experience, and work environments among DOE contractors and facilities. Hence, these guidelines do not address the actual implementation of a nuclear criticality safety training program, but rather they outline the general characteristics that should be included

Safety Training: places available in October 2014

CERN Multimedia

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. Safety Training, HSE Unit safety-training@cern.ch Title of the course EN Title of the course FR Date Hours Language Chemical Safety ATEX Habilitation - Level 2 Habilitation ATEX - Niveau 2 16-Oct-14 to 17-Oct-14 9:00 - 17:30 French Cryogenic Safety Cryogenic Safety - Fundamentals Sécurité Cryogénie - Fondamentaux 23-Oct-14 10:00 - 12:00 English Cryogenic Safety - Helium Transfer Sécurité Cryogénie - Transfert d'hélium 30-Oct-14 9:30 - 12:00 English Electrical Safety Habilitation Electrique - Electrician Low Voltage - Initial Habilitation électrique - Électricien basse tension - Initial 02-Oct-14 to 06-Oct-14 9:00 - 17:30 English 20-Oct-14 to 22-Oct-14 9:00 -...

Safety, training focus of combined organization

Energy Technology Data Exchange (ETDEWEB)

Toop, L.

2006-03-15

This article presented details of Enform, a company that coordinates safety programs and training for new employees in the oil and gas industry. Enform was created when the Petroleum Industry Training Services merged with the Canadian Petroleum Safety Council. The aim of Enform is to ensure continuous improvements in health and safety within the industry by reducing working injuries and promoting health and safety practices. The companies merged to eliminate duplication of services and allow associates further opportunities for advanced training. In 2005, Enform trained an estimated 155,000 students, and a number of new courses were introduced and updated. A franchise program was extended and a training council was formed to offer direction and guidance to the oil industry. Enform focuses on sharing information among companies, as well as working to harmonize safety regulations across provincial borders. A task force was recently created by the company with a specific focus on drug and alcohol abuse. Other concerns include driver safety and driver interactions with wildlife. Enform is mainly focused on the traditional oil industry, and has had little entry into the oil sands industry. It was concluded that increased activity in the oil and gas industry will remain Enform's biggest challenge in the next few years. Plans for Enform's increased involvement in the offshore oil and gas industry were also discussed. 4 figs.

Upgrade the website of Nuclear Training Center for online training

International Nuclear Information System (INIS)

Nguyen Minh Duc; Nguyen Thuy Hang; Nguyen Thi Lien; Luu Thi Thu Hoa; Pham Thi Thu Trang

2017-01-01

In 2016, Nuclear Training Center (NTC) proposed the task of improving and upgrading NTC website’s technology for better performance, more attractive interface and more accessible information to site visitors. This website will be designed to meet the demand for integrated online training site, integrated training management page later. For this task, it is expected to build a website with full modules, English interface of website and especially, the professional website to apply online training technology and tightly integrated close to the present site of a nuclear training center. (author)

Nuclear safety training program (NSTP) for dismantling

International Nuclear Information System (INIS)

Cretskens, Pieter; Lenie, Koen; Mulier, Guido

2014-01-01

European Control Services (GDF Suez) has developed and is still developing specific training programs for the dismantling and decontamination of nuclear installations. The main topic in these programs is nuclear safety culture. We therefore do not focus on technical training but on developing the right human behavior to work in a 'safety culture' environment. The vision and techniques behind these programs have already been tested in different environments: for example the dismantling of the BN MOX Plant in Dessel (Belgium), Nuclear Safety Culture Training for Electrabel NPP Doel..., but also in the non-nuclear industry. The expertise to do so was found in combining the know-how of the Training and the Nuclear Department of ECS. In training, ECS is one of the main providers of education in risky tasks, like elevation and manipulation of charges, working in confined spaces... but it does also develop training on demand to improve safety in a certain topic. Radiation Protection is the core business in the Nuclear Department with a presence on most of the nuclear sites in Belgium. Combining these two domains in a nuclear safety training program, NSTP, is an important stage in a dismantling project due to specific contamination, technical and other risks. It increases the level of safety and leads to a harmonization of different working cultures. The modular training program makes it possible to evaluate constantly as well as in group or individually. (authors)

77 FR 27035 - Rehabilitation Research and Training Center (RRTCs) on Vocational Rehabilitation (VR) and...

Science.gov (United States)

2012-05-08

... training to facilitate the advancement of knowledge and understanding of the unique needs of traditionally... Dislocated Workers with Disabilities: Perspectives from One-Stop Career Centers and Rapid Response... sector of the economy, productivity, competition, jobs, the environment, public health or safety, or...

Nuclear criticality safety department training implementation

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1996-01-01

The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. The NCSD Qualification Program is described in Y/DD-694, Qualification Program, Nuclear Criticality Safety Department This document provides a listing of the roles and responsibilities of NCSD personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This document supersedes Y/DD-696, Revision 2, dated 3/27/96, Training Implementation, Nuclear Criticality Safety Department. There are no backfit requirements associated with revisions to this document

Abramovo Counterterrorism Training Center

International Nuclear Information System (INIS)

Hayes, Christopher M.; Ross, Larry; Kaldenbach, Karen Yvonne; Estigneev, Yuri; Murievav, Andrey

2011-01-01

The U.S. government has been assisting the Russian Federation (RF) Ministry of Defense (MOD) for many years with nuclear weapons transportation security (NWTS) through the provision of specialized guard escort railcars and cargo railcars with integrated physical security and communication systems, armored transport vehicles, and armored escort vehicles. As a natural continuation of the NWTS program, a partnership has been formed to construct a training center that will provide counterterrorism training to personnel in all branches of the RF MOD. The Abramovo Counterterrorism Training Center (ACTC) is a multinational, multiagency project with funding from Canada, RF and the U.S. Departments of Defense and Energy. ACTC will be a facility where MOD personnel can conduct basic through advanced training in various security measures to protect Category IA material against the threat of terrorist attack. The training will enhance defense-in-depth principles by integrating MOD guard force personnel into the overall physical protection systems and improving their overall response time and neutralization capabilities. The ACTC project includes infrastructure improvements, renovation of existing buildings, construction of new buildings, construction of new training facilities, and provision of training and other equipment. Classroom training will be conducted in a renovated training building. Basic and intermediate training will be conducted on three different security training areas where various obstacles and static training devices will be constructed. The central element of ACTC, where advanced training will be held, is the 'autodrome,' a 3 km road along which various terrorist events can be staged to challenge MOD personnel in realistic and dynamic nuclear weapons transportation scenarios. This paper will address the ACTC project elements and the vision for training development and integrating this training into actual nuclear weapons transportation operations.

Cernavoda NPP: Training for safety and reliability

International Nuclear Information System (INIS)

Postolache, Laura Lia

2001-01-01

The safe and reliable operation of NPP require successful integration of plant and system design (1), programmes and procedures (2) and qualified human resources (3). Of these three components, station personnel and management have capability to influence and improve programmes and competence of qualified personnel. Qualifying personnel includes selection, training and evaluation that meet the established performance standards. Training, therefore prepares people to achieve such competence. The critical role of operations personnel has been rightly emphasized by every country with a nuclear power programme. So far as operation team is concerned, they have to work, on the one hand with exacting safety rules and at the same time, they have to do the right thing at all times. In essence, they have to be prepared for new, emergency situations as well as for routine work. The plant operation in the Control Room is essentially a man - machine interaction and a safe and reliable operation requires them to take high quality decisions even under stressful conditions. Here lies therefore the need for high competent and licensed operations engineers who will ensure operation within the operating license of the station under the all conditions. The development of a long-term comprehensive training for Operation Staff is a requirement. The program addresses the qualification requirements of the various nuclear positions on shift, the outline content of the required training programs and the evaluation per the Systematic Approach to Training (SAT). A nuclear operator's training begins the moment he/she enters the station. It takes four to six years to develop the skills required to demonstrate that the candidate is an appropriate choice for the position. Then there's a further about two years of intense training at the Training Center on a simulator. After successful completion of the program, the candidate is authorized by the CNCAN (National Commission for Control of Nuclear

Patient safety goals for the proposed Federal Health Information Technology Safety Center.

Science.gov (United States)

Sittig, Dean F; Classen, David C; Singh, Hardeep

2015-03-01

The Office of the National Coordinator for Health Information Technology is expected to oversee creation of a Health Information Technology (HIT) Safety Center. While its functions are still being defined, the center is envisioned as a public-private entity focusing on promotion of HIT related patient safety. We propose that the HIT Safety Center leverages its unique position to work with key administrative and policy stakeholders, healthcare organizations (HCOs), and HIT vendors to achieve four goals: (1) facilitate creation of a nationwide 'post-marketing' surveillance system to monitor HIT related safety events; (2) develop methods and governance structures to support investigation of major HIT related safety events; (3) create the infrastructure and methods needed to carry out random assessments of HIT related safety in complex HCOs; and (4) advocate for HIT safety with government and private entities. The convening ability of a federally supported HIT Safety Center could be critically important to our transformation to a safe and effective HIT enabled healthcare system. © The Author 2014. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Management of nuclear training center

International Nuclear Information System (INIS)

Seo, In Suk; Lee, Han Young; Cho, Boung Jae; Lee, Seung Hee; Lee, Eoi Jin; You, Byung Hoon; Lee, Won Ku; Jeon, Hyung Ryeon; Seo, Kyung Won; Kim, Young Joong; Kim, Ik Hyun; Hyun, Ha Il; Choi, Il Ki; Hong, Choon Sun; Won, Jong Yeul; Joo, Yong Chang; Nam, Jae Yeul; Sin, Eun Jeong

1996-02-01

This report describes the annual results of training courses. The scope and contents are as follows : 1. Regional and interregional training courses, 2. Training courses assisted by foreign experts, 3. Training courses for nuclear industry personnel, 4. Training courses for internal staff-members, 5. Training courses under the law. The nuclear training center executed the open-door training courses for 2,699 engineers/scientists from the regulatory body, nuclear industries, research institutes and other related organizations by means of offering 69 training courses during the fiscal year 1995. (Author) .new

Safety training news

CERN Multimedia

Safety Training, HSE Unit

2014-01-01

  SELF-RESCUE MASK The "Self-Rescue Mask" face-to-face training course has been replaced by a revised version. This measure concerns both the initial and the refresher course. For personnel who have successfully attended the initial or refresher Self-Rescue Mask training within the last three years, their Self-Rescue Mask training will still be valid.  The course description and registration form can be found in the training catalogue on the Safety Training Service’s website or catalogue. The Self-Rescue Mask training course is a mandatory prerequisite for following the new "Portable ODH Detector" e-learning course.   PORTABLE ODH DETECTOR A new e-learning awareness course, "Portable ODH Detector", is available via the SIR application on CERN’s intranet. Personnel requiring a portable ODH detector of the DRÄGER x-am 5000 type to allowed access th...

The Role of the Radiation Safety Information Computational Center (RSICC) in Knowledge Management

International Nuclear Information System (INIS)

Valentine, T.

2016-01-01

Full text: The Radiation Safety Information Computational Center (RSICC) is an information analysis center that collects, archives, evaluates, synthesizes and distributes information, data and codes that are used in various nuclear technology applications. RSICC retains more than 2,000 packages that have been provided by contributors from various agencies. RSICC’s customers obtain access to such computing codes (source and/or executable versions) and processed nuclear data files to promote on-going research, to help ensure nuclear and radiological safety, and to advance nuclear technology. The role of such information analysis centers is critical for supporting and sustaining nuclear education and training programmes both domestically and internationally, as the majority of RSICC’s customers are students attending U.S. universities. RSICC also supports and promotes workshops and seminars in nuclear science and technology to further the use and/or development of computational tools and data. Additionally, RSICC operates a secure CLOUD computing system to provide access to sensitive export-controlled modeling and simulation (M&S) tools that support both domestic and international activities. This presentation will provide a general review of RSICC’s activities, services, and systems that support knowledge management and education and training in the nuclear field. (author

Safety training for working youth: Methods used versus methods wanted.

Science.gov (United States)

Zierold, Kristina M

2016-04-07

Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

Building competence in radiation and nuclear safety through education and training - the approach of a national regulatory authority

International Nuclear Information System (INIS)

Karfopoulos, K.L.; Carinou, E.; Kamenopoulou, V.; Dimitriou, P.; Housiadas, Ch.

2015-01-01

The Greek Atomic Energy Commission (EEAE) is the national competent authority for radiation and nuclear safety and security as well as for the radiation protection of ionizing and artificially produced non-ionizing radiation. The legal framework determines, inter alia, the responsibilities in education and training issues. The EEAE has a range of activities, in providing postgraduate and continuous education and training on radiation protection, and nuclear safety and security, at the national and international levels. At the national level, and particularly in the medical field, the EEAE is a participant in and a major contributor to the Inter-University Postgraduate Program on Medical Radiation Physics. Since 2003, the EEAE has been the Regional Training Center (RTC) for radiation, transport and waste safety of the International Atomic Energy Agency (IAEA) for the European Region in the English language. Moreover, the EEAE has also been recognized as the IAEA's Regional Training Center (RTC) in nuclear security in the English language since 2013. The EEAE recently proceeded to two significant initiatives: the design of a national program for education and training, and the certification of the Department of Education according to ISO 29990:2010. In this paper, the initiatives taken to enhance the radiation protection system in the country through education and training are presented. (authors)

Nuclear safety research collaborations between the US and Russian Federation international nuclear safety centers

International Nuclear Information System (INIS)

Hill, D.J; Braun, J.C; Klickman, A.E.; Bugaenko, S.E; Kabanov, L.P; Kraev, A.G.

2000-01-01

The Russian Federation Ministry for Atomic Energy (MINATOM) and the U.S. Department of Energy (USDOE) have formed International Nuclear Safety Centers to collaborate on nuclear safety research. USDOE established the U. S. Center at Argonne National Laboratory in October 1995. MINATOM established the Russian Center at the Research and Development Institute of Power Engineering in Moscow in July 1996. In April 1998 the Russian center became an independent, autonomous organization under MINATOM. The goals of the centers are to: cooperate in the development of technologies associated with nuclear safety in nuclear power engineering. be international centers for the collection of information important for safety and technical improvements in nuclear power engineering. maintain a base for fundamental knowledge needed to design nuclear reactors.The strategic approach that is being used to accomplish these goals is for the two centers to work together to use the resources and the talents of the scientists associated with the US Center and the Russian Center to do collaborative research to improve the safety of Russian-designed nuclear reactors

Intelligent tutors for control center operator training

Energy Technology Data Exchange (ETDEWEB)

Vale, Z.A. [Porto Univ. (Portugal). Dept. of Electrical and Computer Engineering; Fernandes, M.F.; Marques, A. [Electricity of Portugal, Sacavem (Portugal)

1995-12-31

Power systems are presently remotely operated and controlled from control centers that receive on-line information about the power system state. Control center operators have very high-demanding tasks what makes their training a key issue for the performance of the whole power system. Simulators are usually used by electrical utilities for this purpose but they are very expensive applications and their use requires the preparation of the training sessions by qualified training staff which is a very time consuming task. Due to this, these simulators are only used a few times a year. Intelligent Tutoring Systems (ITS) provide some new possibilities for control center operator training making easier its use without much assistance of the teaching staff. On the other hand, an expert system in use in a control center can be adapted to an ITS to train operators without much effort. 18 refs

[Innovative training for enhancing patient safety. Safety culture and integrated concepts].

Science.gov (United States)

Rall, M; Schaedle, B; Zieger, J; Naef, W; Weinlich, M

2002-11-01

Patient safety is determined by the performance safety of the medical team. Errors in medicine are amongst the leading causes of death of hospitalized patients. These numbers call for action. Backgrounds, methods and new forms of training are introduced in this article. Concepts from safety research are transformed to the field of emergency medical treatment. Strategies from realistic patient simulator training sessions and innovative training concepts are discussed. The reasons for the high numbers of errors in medicine are not due to a lack of medical knowledge, but due to human factors and organisational circumstances. A first step towards an improved patient safety is to accept this. We always need to be prepared that errors will occur. A next step would be to separate "error" from guilt (culture of blame) allowing for a real analysis of accidents and establishment of meaningful incident reporting systems. Concepts with a good success record from aviation like "crew resource management" (CRM) training have been adapted my medicine and are ready to use. These concepts require theoretical education as well as practical training. Innovative team training sessions using realistic patient simulator systems with video taping (for self reflexion) and interactive debriefing following the sessions are very promising. As the need to reduce error rates in medicine is very high and the reasons, methods and training concepts are known, we are urged to implement these new training concepts widely and consequently. To err is human - not to counteract it is not.

Safety training parks – A case study on the effectiveness of the trainings

DEFF Research Database (Denmark)

Räsänen, Tuula; Sormunen, E.; Reiman, Arto

The Safety Training Park (STP) concept is a unique Finnish safety training innovation. The STP provides different actors of the construction industry and other branches a practical occupational safety and health (OSH) training area. To the authors’ knowledge, no such parks exist in Europe besides...... Finland. Objec-tive was to study the effectiveness of the STP trainings at a large case company which participated in this study and which has actively trained its personnel in the park. The study was conducted from February 2015 to Feb-ruary 2017. Several key success factors were identified...... in the interviews of this case study. In addition, the company OSH statistics (2010 – 2016) showed a positive development at safety level. However, The Nordic Safety Climate Questionnaire did not show any significant change of results in a one year period. According to the results of the group interviews...

Training activities at the EPRI NDE Center

International Nuclear Information System (INIS)

Pherigo, G.

1986-01-01

The Electric Power Research Institute (EPRI), through its Nondestructive Examination (NDE) Center in Charlotte, North Carolina, has identified two specific categories of NDE training to best serve the industry's need for enhanced personnel qualification programs. These categories include in-service inspection (ISI) training and technical skills training. The ISI training provides operator training in new NDE technology areas that are ready for field application. The technical skills training is developed as part of a long-range plan to support all basic NDE methods typical to the electric power industry. The need for specific training and better documentation of NDE personnel qualifications is becoming more evident. ASME Section XI requirements for the qualification and certification of visual examiners and the recognition by the US Nuclear Regulatory Commission (NRC) of the importance of the ultrasonic (UT) operator in finding intergranular stress corrosion cracking (IGSCC) are two of the major issues being addressed by the training task of the EPRI NDE Center. The overall intent of the center's training is to meet the most critical utility needs with quality training that can be used by the trainee's employer as a part of their certification of that individual. To do this, the center has organized and activated a carefully maintained documentation and records systems built around the continuing education unit

Occupational safety training and practices in selected vocational training institutions and workplaces in Kampala, Uganda.

Science.gov (United States)

Kintu, Denis; Kyakula, Michael; Kikomeko, Joseph

2015-01-01

Several industrial accidents, some of them fatal, have been reported in Uganda. Causes could include training gaps in vocational training institutions (VTIs) and workplaces. This study investigated how occupational safety training in VTIs and workplaces is implemented. The study was carried out in five selected VTIs and workplaces in Kampala. Data were collected from instructors, workshop technicians, students, workshop managers, production supervisors, machine operators and new technicians in the workplaces. A total of 35 respondents participated in the study. The results revealed that all curricula in VTIs include a component of safety but little is practiced in VTI workshops; in workplaces no specific training content was followed and there were no regular consultations between VTIs and industry on safety skills requirements, resulting in a mismatch in safety skills training. The major constraints to safety training include inadequate funds to purchase safety equipment and inadequate literature on safety.

Teen worker safety training: methods used, lessons taught, and time spent.

Science.gov (United States)

Zierold, Kristina M

2015-05-01

Safety training is strongly endorsed as one way to prevent teens from performing dangerous tasks at work. The objective of this mixed methods study was to characterize the safety training that teenagers receive on the job. From 2010 through 2012, focus groups and a cross-sectional survey were conducted with working teens. The top methods of safety training reported were safety videos (42 percent) and safety lectures (25 percent). The top lessons reported by teens were "how to do my job" and "ways to spot hazards." Males, who were more likely to do dangerous tasks, received less safety training than females. Although most teens are getting safety training, it is inadequate. Lessons addressing safety behaviors are missing, training methods used are minimal, and the time spent is insignificant. More research is needed to understand what training methods and lessons should be used, and the appropriate safety training length for effectively preventing injury in working teens. In addition, more research evaluating the impact of high-quality safety training compared to poor safety training is needed to determine the best training programs for teens. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

The European Nuclear Safety Training and Tutoring Institute

International Nuclear Information System (INIS)

2012-01-01

The European Nuclear Safety Training and Tutoring Institute, ENSTTI, is an initiative of European Technical Safety Organizations (TSO) in order to provide vocational training and tutoring in the methods and practices required to perform assessment in nuclear safety, nuclear security and radiation protection. ENSTTI calls on TSOs' expertise to maximize the transmission of safety and security knowledge, practical experience and culture. Training, tutoring and courses for specialists are achieved through practical lectures, working group and technical visits and lead to a certificate after knowledge testing. ENSTTI contributes to the harmonization of nuclear safety and security practices and to the networking of today and future nuclear safety experts in Europe and beyond. (A.C.)

Management commitment to safety vs. employee perceived safety training and association with future injury.

Science.gov (United States)

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the

Present status of the Nuclear Maintenance Training Center

International Nuclear Information System (INIS)

Kotani, Fumio

1995-01-01

The education and training to keep and improve the knowledge and skills of the maintenance personnel and to hand down the skills undoubtedly play important roles in safe operation and increased reliability to a nuclear power station. The Nuclear Maintenance Training Center (hereafter called the Center) provides a variety of education and training curriculums based on the levels and abilities of the trainees. The Center aims to enhance the personnel's maintenance technique by offering the curriculums on maintenance basic education for operators and supporting education and training for the personnel of contractors. The Center has two main features: first, it has the actual components or the equipment similar to the actual components which will enable the practical training; second, we regard the past troubles as valuable experiences and, therefore, focuses on the education to prevent recurrence of troubles by teaching the trainees the meaning and necessity of the training they take. For eleven years since the establishment of the Center, it has been utilized by the total number of about 60,000 people. As for the tasks in the future, the Center is expected to vitalize itself to give attractive education and training and become more actively involved in development of the maintenance personnel with the adequate knowledge and skills. (author)

Nuclear criticality safety: 2-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1997-02-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course

Nuclear criticality safety: 2-day training course

Energy Technology Data Exchange (ETDEWEB)

Schlesser, J.A. [ed.] [comp.

1997-02-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course.

Safety Training: Access rights underground and safety training

CERN Multimedia

Laetitia Laddada

2004-01-01

This is to remind all CERN Group Leaders/GLIMOS of their obligation to ensure that members of their group/experiment or personnel belonging to firms holding contracts under their responsibility have received the necessary training/instruction in safety before start of work. Access underground will only be authorized upon attendance at safety courses level 1, 2 and 3, provided by the CERN Fire Brigade. All persons not having attended these courses will be locked out. All individuals concerned, as well as their Group Leaders/GLIMOS should check the access rights of their staff at the URL: https://hrt.cern.ch/servlet/cern.hrt.Access.Access In case you or your collaborators do not have the requested authorisation, you/they must attend the safety courses provided every Tuesday by the Fire Brigade or the additional courses on: 16 June, course given in French, 9 a.m. - 12 a.m., AB Auditorium I (Bldg. 6/2-024), 17 June, course given in English, 2 p.m. - 5 p.m., AB Auditorium I (Bldg. 6/2-024). Formation en SEC...

Approach to training the trainer at the Bell System Training Center

International Nuclear Information System (INIS)

Housley, E.A.; Stevenson, J.L.

1981-01-01

The major activity of the Bell System Training Center is to develop and deliver technical training. Experts in various technical areas are selected as course developers or instructors, usually on rotational assignments. Through a series of workshops, described in this paper, combined with coaching, use of job aids and working with more experienced peers, they become competent developers or instructors. There may be similarities between the mission of the Bell System Training Center and other contexts where criticality of job performance and technical subject matter are training characteristics

29 CFR 1926.21 - Safety training and education.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

OSHA Training Programs. Module SH-48. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Development of Safety Review Guidance for Research and Training Reactors

International Nuclear Information System (INIS)

Oh, Kju-Myeng; Shin, Dae-Soo; Ahn, Sang-Kyu; Lee, Hoon-Joo

2007-01-01

The KINS already issued the safety review guidance for pressurized LWRs. But the safety review guidance for research and training reactors were not developed. So, the technical standard including safety review guidance for domestic research and training reactors has been applied mutates mutandis to those of nuclear power plants. It is often difficult for the staff to effectively perform the safety review of applications for the permit by the licensee, based on peculiar safety review guidance. The NRC and NSC provide the safety review guidance for test and research reactors and European countries refer to IAEA safety requirements and guides. The safety review guide (SRG) of research and training reactors was developed considering descriptions of the NUREG- 1537 Part 2, previous experiences of safety review and domestic regulations for related facilities. This study provided the safety review guidance for research and training reactors and surveyed the difference of major acceptance criteria or characteristics between the SRG of pressurized light water reactor and research and training reactors

INDUSTRIAL TRAINING AND TRAINING IN SAFETY, A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 2.

Science.gov (United States)

Ministry of Labour, London (England).

THE TRAINING OF WORKERS IN SAFETY AND IN SAFE METHODS OF WORK IS AN ESSENTIAL PART OF ACCIDENT PREVENTION. IT IS A MANAGEMENT RESPONSIBILITY TO DO THIS, AND, TO BE EFFECTIVE, MANAGEMENT ITSELF MUST BE CONVINCED OF THE NEED FOR SAFETY TRAINING. IT SHOULD BE CARRIED OUT AS PART OF THE NORMAL TRAINING WHICH ALL ENTRANTS TO INDUSTRY RECEIVE. THE…

[Technology: training centers--a new method for learning surgery in visceral surgery].

Science.gov (United States)

Troidl, H

1996-01-01

The importance of training centers can be best described after first answering a few questions like: 1. What kind of surgery will we deal with in the future? 2. What kind of surgeon do we need for this surgery, if it is basically different? 3. How will this surgeon have to be educated/trained for this different surgery? Although I am aware of the fact, that statements about future prospects are usually doomed to fail, I maintain that endoscopic surgery will be an essential part of general surgery. If this is so, surgery will be dominated by extremely complicated technology, new techniques and new instruments. It will be a "different" surgery. It will offer more comfort at the same safety. The surgeon of the future will still need a certain personality; he will still need intuition and creativity. To survive in our society, he will have to be an organiser and even a businessman. Additionally, something new has to be added: he will have to understand modern, complicated technology and will have to use totally different instruments for curing surgical illness. This makes it clear that we will need a different education/training and may be even a different selection of surgeons. We should learn from other professions sharing common interests with surgery, for example, sports where the common interest is achieving most complicated motions and necessarily highly differentiated coordination. Common interest with airline pilots is the target of achieving absolute security. They have a highly differentiated selection and training concept. Training centers may be-under certain prerequisites-a true alternative for this necessary form of training. They must have a concept, i.e. contents and aims have to be defined, structured and oriented on the requirements of surgery for the patient. Responsibility for the concept, performance and control can only be in the hands of Surgical Societies and Universities. These prerequisites correspond most likely to training centers being

The Development, Content, Design, and Conduct of the 2011 Piloted US DOE Nuclear Criticality Safety Program Criticality Safety Engineering Training and Education Project

International Nuclear Information System (INIS)

Hopper, Calvin Mitchell

2011-01-01

Laboratory (SNL) hands-on criticality experiments training, and the US DOE National Criticality Experiment Research Center (NCERC) hands-on criticality experiments training that is jointly supported by LLNL and LANL and located at the Nevada National Security Site (NNSS) This paper provides the description of the bases, content, and conduct of the piloted, and future US DOE NCSP Criticality Safety Engineer Training and Education Project.

Use of a Web Site to Enhance Criticality Safety Training

International Nuclear Information System (INIS)

Huang, S T; Morman, J

2003-01-01

Currently, a website dedicated to enhancing communication and dissemination of criticality safety information is sponsored by the U.S. Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP). This website was developed as part of the DOE response to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2, which reflected the need to make criticality safety information available to a wide audience. The website is the focal point for DOE nuclear criticality safety (NCS) activities, resources and references, including hyperlinks to other sites actively involved in the collection and dissemination of criticality safety information. The website is maintained by the Lawrence Livermore National Laboratory (LLNL) under auspices of the NCSP management. One area of the website contains a series of Nuclear Criticality Safety Engineer Training (NCSET) modules. During the past few years, many users worldwide have accessed the NCSET section of the NCSP website and have downloaded the training modules as an aid for their training programs. This trend was remarkable in that it points out a continuing need of the criticality safety community across the globe. It has long been recognized that training of criticality safety professionals is a continuing process involving both knowledge-based training and experience-based operations floor training. As more of the experienced criticality safety professionals reach retirement age, the opportunities for mentoring programs are reduced. It is essential that some method be provided to assist the training of young criticality safety professionals to replenish this limited human expert resource to support on-going and future nuclear operations. The main objective of this paper is to present the features of the NCSP website, including its mission, contents, and most importantly its use for the dissemination of training modules to the criticality safety community. We will discuss lessons learned and several ideas

Training Programs on Radiological Safety for users of Ionizing Radiations in Peru

International Nuclear Information System (INIS)

Medina Gironzini, E.

2003-01-01

In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country , grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well a s the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc...) and are part of the continuous education program of CSEN. (Author)

DEVELOPMENT OF SIMULATION CENTER AND TRAINING PROGRAMMES IN IVANO-FRANKIVSK PERINATAL CENTER

Directory of Open Access Journals (Sweden)

Zoryana Kocherga

2017-06-01

Full Text Available Current system of medical education in Ukraine needs improvement and reforms in order to enhance the proficiency of doctors and paramedics. Training of practical/technical skills, communication, as well as teamwork skills is considerably important.The use of simulation techniques and methods in medical education is called simulation training in medicine. Medical skills are acquired through cognitive (knowledge and psychomotor (practice skills. The first medical simulation centers appeared in Ukraine in 2006 according to the order of the Ministry of Health Care of Ukraine.On June 20, 2013, a new simulation training center was opened in Ivano-Frankivsk on the base of Regional Perinatal Center. Similar medical simulation centers were opened in the second half of 2013 in Volyn and Vinnytsia regions under the Ukrainian-Swiss Mother and Child Health Programme, which started in the area of perinatology. Their goal is to improve the teamwork of all specialists involved in the process of delivery and neonatal intensive care,as well as to engage internship doctors and senior medical students in clinical skills training programmes.The use of simulation techniques and training programs offers a powerful platform to study and practice clinical reasoning behaviors and patterns.

Radiation safety training for accelerator facilities

International Nuclear Information System (INIS)

Trinoskey, P.A.

1997-02-01

In November 1992, a working group was formed within the U.S. Department of Energy's (DOE's) accelerator facilities to develop a generic safety training program to meet the basic requirements for individuals working in accelerator facilities. This training, by necessity, includes sections for inserting facility-specific information. The resulting course materials were issued by DOE as a handbook under its technical standards in 1996. Because experimenters may be at a facility for only a short time and often at odd times during the day, the working group felt that computer-based training would be useful. To that end, Lawrence Livermore National Laboratory (LLNL) and Argonne National Laboratory (ANL) together have developed a computer-based safety training program for accelerator facilities. This interactive course not only enables trainees to receive facility- specific information, but time the training to their schedule and tailor it to their level of expertise

Safety Training and Awareness: a team at your service

CERN Multimedia

HSE Unit

2014-01-01

Ever wondered who is on the other end of the safety-training@cern.ch e-mail address? If so, you might like to know that all the activities relating to safety training and awareness (“Safety Training" for short) are managed by a team dedicated to ensuring the smooth running of CERN’s safety training courses.    Photo: Christoph Balle. This team currently consists of five people: the manager in charge of coordinating all the projects, two administrative assistants who provide logistical support and two technicians who manage the training centre. This team, which has seen its workload and the number of challenges it faces increase considerably with LS1, is responsible for organising classroom training sessions (in partnership with some 15 training bodies) and for the management of online e-learning courses in partnership with the GS-AIS Group. The members of the team don't just deal with enrolment on the courses: they also help with the development...

76 FR 35474 - UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On...

Science.gov (United States)

2011-06-17

...-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Including On-Site Leased Workers From Cranks, O/E Learning, DBSI, IDEA, and Tonic/MVP, Detroit, MI; UAW-Chrysler Technical Training... workers and former workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs...

Laser safety tools and training

CERN Document Server

Barat, Ken

2008-01-01

Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

RIAR training center, Dimitrovgrad, Russia

International Nuclear Information System (INIS)

Makin, R.

1998-01-01

The presentation describes activities and history of the training Center for NPP personnel at the Research Institute of Atomic Reactors (RIAR) in Dimitrovgrad, Russian Federation since its beginnings in 1993. The courses held for training instructors and specialists as well as Russian NPPs were organised in cooperation with American and German organisations

Nuclear safety research collaborations between the U.S. and Russian Federation International Nuclear Safety Centers

International Nuclear Information System (INIS)

Hill, D. J.; Braun, J. C.; Klickman, A. E.; Bougaenko, S. E.; Kabonov, L. P.; Kraev, A. G.

2000-01-01

The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) have formed International Nuclear Safety Centers to collaborate on nuclear safety research. USDOE established the US Center (ISINSC) at Argonne National Laboratory (ANL) in October 1995. MINATOM established the Russian Center (RINSC) at the Research and Development Institute of Power Engineering (RDIPE) in Moscow in July 1996. In April 1998 the Russian center became a semi-independent, autonomous organization under MINATOM. The goals of the center are to: Cooperate in the development of technologies associated with nuclear safety in nuclear power engineering; Be international centers for the collection of information important for safety and technical improvements in nuclear power engineering; and Maintain a base for fundamental knowledge needed to design nuclear reactors. The strategic approach is being used to accomplish these goals is for the two centers to work together to use the resources and the talents of the scientists associated with the US Center and the Russian Center to do collaborative research to improve the safety of Russian-designed nuclear reactors. The two centers started conducting joint research and development projects in January 1997. Since that time the following ten joint projects have been initiated: INSC databases--web server and computing center; Coupled codes--Neutronic and thermal-hydraulic; Severe accident management for Soviet-designed reactors; Transient management and advanced control; Survey of relevant nuclear safety research facilities in the Russian Federation; Computer code validation for transient analysis of VVER and RBMK reactors; Advanced structural analysis; Development of a nuclear safety research and development plan for MINATOM; Properties and applications of heavy liquid metal coolants; and Material properties measurement and assessment. Currently, there is activity in eight of these projects. Details on each of these

Project plan, Hazardous Materials Management and Emergency Response Training Center: Project 95L-EWT-100

International Nuclear Information System (INIS)

Borgeson, M.E.

1994-01-01

The Hazardous Materials Management and Emergency Response (HAMMER) Training Center will provide for classroom lectures and hands-on practical training in realistic situations for workers and emergency responders who are tasked with handling and cleanup of toxic substances. The primary objective of the HAMMER project is to provide hands-on training and classroom facilities for hazardous material workers and emergency responders. This project will also contribute towards complying with the planning and training provisions of recent legislation. In March 1989 Title 29 Code of Federal Regulations Occupational Safety and Health Administration 1910 Rules and National Fire Protection Association Standard 472 defined professional requirements for responders to hazardous materials incidents. Two general types of training are addressed for hazardous materials: training for hazardous waste site workers and managers, and training for emergency response organizations

Use of a web site to enhance criticality safety training

International Nuclear Information System (INIS)

Huang, Song T.; Morman, James A.

2003-01-01

Establishment of the NCSP (Nuclear Criticality Safety Program) website represents one attempt by the NCS (Nuclear Criticality Safety) community to meet the need to enhance communication and disseminate NCS information to a wider audience. With the aging work force in this important technical field, there is a common recognition of the need to capture the corporate knowledge of these people and provide an easily accessible, web-based training opportunity to those people just entering the field of criticality safety. A multimedia-based site can provide a wide range of possibilities for criticality safety training. Training modules could range from simple text-based material, similar to the NCSET (Nuclear Criticality Safety Engineer Training) modules, to interactive web-based training classes, to video lecture series. For example, the Los Alamos National Laboratory video series of interviews with pioneers of criticality safety could easily be incorporated into training modules. Obviously, the development of such a program depends largely upon the need and participation of experts who share the same vision and enthusiasm of training the next generation of criticality safety engineers. The NCSP website is just one example of the potential benefits that web-based training can offer. You are encouraged to browse the NCSP website at http://ncsp.llnl.gov. We solicit your ideas in the training of future NCS engineers and welcome your participation with us in developing future multimedia training modules. (author)

Center for Maritime Safety and Health Studies

Data.gov (United States)

Federal Laboratory Consortium — Established in November 2015, the Center for Maritime Safety and Health Studies (CMSHS) promotes safety and health for all maritime workers, including those employed...

Evaluation of the food safety training for food handlers in restaurant operations

Science.gov (United States)

Park, Sung-Hee; Kwak, Tong-Kyung

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaurants participated in this study. We split them into two groups: the intervention group with training, and the control group without food safety training. Employee knowledge of the intervention group also showed a significant improvement in their score, increasing from 49.3 before the training to 66.6 after training. But in terms of employee practices and the sanitation performance, there were no significant increases after the training. From these results, we recommended that the more job-specific and hand-on training materials for restaurant employees should be developed and more continuous implementation of the food safety training and integration of employee appraisal program with the outcome of safety training were needed. PMID:20198210

76 FR 39811 - International Center for Technology Assessment and the Center for Food Safety; Noxious Weed...

Science.gov (United States)

2011-07-07

... dated July 18, 2002, the International Center for Technology Assessment and the Center for Food Safety... Inspection Service [Docket No. APHIS-2011-0081] International Center for Technology Assessment and the Center for Food Safety; Noxious Weed Status of Kentucky Bluegrass Genetically Engineered for Herbicide...

A survey of radiation safety training among South African interventionalists

Directory of Open Access Journals (Sweden)

A Rose

2018-04-01

Full Text Available Background. Ionising radiation is increasingly being used in modern medicine for diagnostic, interventional and therapeutic purposes. There has been an improvement in technology, resulting in lower doses being emitted. However, an increase in the number of procedures has led to a greater cumulative dose for patients and operators, which places them at increased risk of the effects of ionising radiation. Radiation safety training is key to optimising medical practice.Objective. To present the perceptions of South African interventionalists on the radiation safety training they received and to offer insights into the importance of developing and promoting such training programmes for all interventionalists.Methods. In this cross-sectional study, we collected data from interventionalists (N=108 using a structured questionnaire.Results. All groups indicated that radiation exposure in the workplace is important (97.2%. Of the participants, the radiologists received the most training (65.7%. Some participants (44.1% thought that their radiation safety training was adequate. Most participants (95.4% indicated that radiation safety should be part of their training curriculum. Few (34.3% had received instruction on radiation safety when they commenced work. Only 62% had been trained on how to protect patients from ionising radiation exposure.Conclusion. Radiation safety training should be formalised in the curriculum of interventionalists’ training programmes, as this will assist in stimulating a culture of radiation protection, which in turn will improve patient safety and improve quality of care.

Occupational Safety. Hygiene Safety. Pre-Apprenticeship Phase 1 Training.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This self-paced student training module on hygiene safety is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to familiarize students with the different types of airborne contaminants--including noise--which may be health hazards and with the proper hygienic measures for dealing with them. The…

76 FR 2147 - UAW-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW...

Science.gov (United States)

2011-01-12

...-Chrysler National Training Center Technology Training Joint Programs Staff, Detroit, MI; UAW-Chrysler Technical Training Center Technology Training Joint Programs Staff, Warren, MI; Notice of Revised... investigation, the Department confirmed that the proportion of Technology Training Joint Programs Staff...

Compliance of child care centers in Pennsylvania with national health and safety performance standards for emergency and disaster preparedness.

Science.gov (United States)

Olympia, Robert P; Brady, Jodi; Kapoor, Shawn; Mahmood, Qasim; Way, Emily; Avner, Jeffrey R

2010-04-01

To determine the preparedness of child care centers in Pennsylvania to respond to emergencies and disasters based on compliance with National Health and Safety Performance Standards for Out-of-Home Child Care Programs. A questionnaire focusing on the presence of a written evacuation plan, the presence of a written plan for urgent medical care, the immediate availability of equipment and supplies, and the training of staff in first aid/cardiopulmonary resuscitation (CPR) as delineated in Caring for Our Children: National Health and Safety Performance Standards for Out-of-Home Child Care Programs, 2nd Edition, was mailed to 1000 randomly selected child care center administrators located in Pennsylvania. Of the 1000 questionnaires sent, 496 questionnaires were available for analysis (54% usable response rate). Approximately 99% (95% confidence interval [CI], 99%-100%) of child care centers surveyed were compliant with recommendations to have a comprehensive written emergency plan (WEP) for urgent medical care and evacuation, and 85% (95% CI, 82%-88%) practice their WEP periodically throughout the year. More than 20% of centers did not have specific written procedures for floods, earthquakes, hurricanes, blizzards, or bomb threats, and approximately half of the centers did not have specific written procedures for urgent medical emergencies such as severe bleeding, unresponsiveness, poisoning, shock/heart or circulation failure, seizures, head injuries, anaphylaxis or allergic reactions, or severe dehydration. A minority of centers reported having medications available to treat an acute asthma attack or anaphylaxis. Also, 77% (95% CI, 73%-80%) of child care centers require first aid training for each one of its staff members, and 33% (95% CI, 29%-37%) require CPR training. Although many of the child care centers we surveyed are in compliance with the recommendations for emergency and disaster preparedness, specific areas for improvement include increasing the frequency

Center for Food Safety and Applied Nutrition

Data.gov (United States)

Federal Laboratory Consortium — The Center for Food Safety and Applied Nutrition, known as CFSAN, is one of six product-oriented centers, in addition to a nationwide field force, that carry out the...

The development of NPP operational safety training courses

International Nuclear Information System (INIS)

Lee, Chang Kun; Lee, Duk Sun; Lee, Byung Sun; Lee, Won Koo; Juhn, Heng Run; Moon, Byung Soo; Cho, Min Sik; Lee, Han Young; Moon, Hak Won; Seo, Yeon Ho

1987-12-01

The objective of the project is to develop a training course text for the betterment of reactor operation and assurance of its safety in general by providing training materials of the advanced compact nuclear simulator which will become operation in September 1988. Main scope and contents of the project are as follows: - compilation of basic data related to simulator operation and maintenance as well as the comparative analysis with respect to simulator materials in foreign countries - method of training by simulator - review the training status by simulator in foreign countries - development of training course in the field of reactor safety It is expected that the results will be reflected to the actual training and retraining of the reactor operating crew so as to improve and update their capabilities in training fashion. (Author)

Safety training: places available in September 2014

CERN Multimedia

HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   Please note that there are 7 places left on the “Territorial Safety Officer (TSO) – Initial” course on September 23-25, 2014 (in French).

Computer-based and web-based radiation safety training

Energy Technology Data Exchange (ETDEWEB)

Owen, C., LLNL

1998-03-01

The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.

Employers' Occupational Health and Safety Training Obligations in Framework Directive and Training Procedure and Rules in Turkey

OpenAIRE

Nuray Gökçek Karaca; Berrin Gökçek

2015-01-01

Employers occupational safety and health training obligations are regulated in 89/391/EEC Framework Directive and also in 6331 numbered Occupational Health and Safety Law in Turkey. The main objective of this research is to determine and evaluate the employers’ occupational health and safety training obligations in Framework Directive in comparison with the 6331 numbered Occupational Health and Safety Law and to examine training principles in Turkey. For this purpose, ...

Transportation safety training

International Nuclear Information System (INIS)

Jones, E.

1990-01-01

Over the past 25 years extensive federal legislation involving the handling and transport of hazardous materials/waste has been passed that has resulted in numerous overlapping regulations administered and enforced by different federal agencies. The handling and transport of hazardous materials/waste involves a significant number of workers who are subject to a varying degree of risk should an accident occur during handling or transport. Effective transportation training can help workers address these risks and mitigate them, and at the same time enable ORNL to comply with the federal regulations concerning the transport of hazardous materials/waste. This presentation will outline how the Environmental and Health Protection Division's Technical Resources and Training Section at the Oak Ridge National Laboratory, working with transportation and waste disposal personnel, have developed and implemented a comprehensive transportation safety training program to meet the needs of our workers while satisfying appropriate federal regulations. 8 refs., 3 tabs

A collaborative effort of medical and educational facilities for radiation safety training of nurses

International Nuclear Information System (INIS)

Matsuda, Naoki; Yoshida, Masahiro; Takao, Hideaki

2005-01-01

The proper understanding of radiation safety by nursing staffs in hospitals are essential not only for radiation protection of themselves against occupational radiation exposure but for quality nursing for patients who receive medical radiation exposure. The education program on radiation in nursing schools in Japan is, however, rather limited, and is insufficient for nurses to acquire basic knowledge of radiation safety and protection. Therefore, the radiation safety training of working nurses is quite important. A hospital-based training needs assignment of radiation technologists and radiologists as instructors, which may result in temporary shortage of these staffs for patients' services. Additionally, the equipments and facilities for radiation training in a hospital might not be satisfactory. In order to provide an effective education regarding radiation for working nurses, the radiation safety training course has been conducted for nurse of the university hospital by the collaboration of medical and educational staffs in Nagasaki University. This course was given for 6 hours in Radioisotope Research Center, a research and education facility for radiation workers using radioisotopes. The curriculum of this course included basics of radiation, effects of radiation on human health, procedures in clinical settings for radiation protection and practical training by using survey meters, which were mainly based on the radiation safety training for beginners according to the Japanese law concerning radiation safety with a modification to focus on medical radiation exposure. This course has been given to approximately 25 nurses in a time, and held 13 times in May 2000 through October 2003 for 317 nurse overall. The pre-instruction questionnaire revealed that 60% of nurses felt fears about radiation diagnosis or therapy, which reduced to less than 15% in the post-instruction surveillance. The course also motivated nurses to give an answer to patients' questions about

Live defibrillation in simulation-based medical education--a survey of simulation center practices and attitudes.

Science.gov (United States)

Turban, Joseph W; Peters, Deborah P; Berg, Benjamin W

2010-02-01

Resuscitation from cardiac arrhythmia, requiring cardioversion/defibrillation is a common simulation training scenario. Use of live defibrillation enhances simulation fidelity but is not without risk. This survey was conducted to describe the prevalence of live defibrillation use during training scenarios in healthcare simulation centers, and when used, if safety training was required before using live defibrillation. A convenience sample of attendees at the 7th annual International Meeting on Simulation in Healthcare (January 2007) was surveyed using a closed-ended 23-item survey instrument. Survey domains included responder and simulation center demographics, simulation center defibrillation safety policies, and attitudes toward defibrillation practices in simulation training environments. Fifty-seven individuals representing 39 simulation centers returned surveys, 29 of which were in the United States. Live defibrillation was used in 35 of the 39 centers (90%). A defibrillation safety training policy was in effect at 14 of 39 centers (36%). Formal training before using live defibrillation was considered necessary by 48 of 55 responders (87%). Forty-eight of 54 responders (89%) strongly agreed or agreed with the statement, "I feel using live defibrillation plays an important role in simulation-based education." Although most responders consider use of live defibrillation important and believe formal defibrillator safety training should be conducted before use, only about one third of the centers had a training policy in effect. It remains to be determined whether safety training before the use of live defibrillation during simulation-based education increases user safety.

Evaluation of the food safety training for food handlers in restaurant operations

OpenAIRE

Park, Sung-Hee; Kwak, Tong-Kyung; Chang, Hye-Ja

2010-01-01

This study examined the extent of improvement of food safety knowledge and practices of employee through food safety training. Employee knowledge and practice for food safety were evaluated before and after the food safety training program. The training program and questionnaires for evaluating employee knowledge and practices concerning food safety, and a checklist for determining food safety performance of restaurants were developed. Data were analyzed using the SPSS program. Twelve restaur...

One size fits all: Safety training for 10,000 workers

International Nuclear Information System (INIS)

March, J.

1998-01-01

Last summer, the author participated in a major, orchestrated, training event at Los Alamos designed to convey some of the key components of ISM to the workforce. The event was called Safety Days 1997. The objectives were to produce a genuine training event that was logical, focused, interactive, well-written, easy to follow, and that provided people with choices rather than a rigid script. This was the first effort at the Laboratory to organize a way for middle managers to become the safety trainers of their work teams. While upper management supported the concept and product, many were satisfied with the notion of simply creating a time for workers to discuss safety concerns. This paper considers the context of Safety Days 1997, how the training was received, the response to that training, and recommendations for Safety Days 1998

Safety Training: scheduled sessions in April

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in April. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 26-APR-11 (08.30 – 10.00) in French 26-APR-11 (10.30 – 12.00) in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) 28-APR-11 to 29-APR-11 (08.00 – 17.30) in French* Sécurité chimique – Introduction 29-APR-11 (09.00 – 11.30) in French (*) session in French with the possibility of receiving the documentation in English   By Isabelle Cusato (H...

Sumatera Air Asia Training Center (Arsitektur Metafora)

OpenAIRE

Susanto, William

2015-01-01

Sumatera Air Asia Training Center as Air Asia training facility’s construction have a propose to train the Air Asia air craft crew who will be the employee of the Air Asia Airlines.Beside the main function;training facility for the Air Asia Crew; the other airline’s crew can be train by a cooperation with Air Asia.The aircraft crew that can be train in this facility is pilot initial, pilot type-rating, pilot recurrent, ATPL, Flight attendant initial and recurrent..This facility ha...

Nuclear criticality safety specialist training and qualification programs

International Nuclear Information System (INIS)

Hopper, C.M.

1993-01-01

Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

Children Road Safety Training with Augmented Reality (AR) [Demo

OpenAIRE

Lugmayr, Artur; Tsang, Joyce; Williams, Toby; Lim, Casey X; Teo, Yeet Yung; Farmer, Matthew

2018-01-01

Children killed or seriously injured through road accidents can be avoided through an appropriate safety training. Through play and engagement children learn and understand hazards at i.e. railway stations, bus stops, crossings, school zones, train stations, footpaths, or while cycling. We developed a rapid prototype of an Augmented Reality (AR) safety training proof-of-concept demonstrator for a scaled real-world model of dangerous road hazards. Two scenarios have been picked to give childre...

The role of staff training in the safety of nuclear facilities

International Nuclear Information System (INIS)

Koechlin, J.C.; Tanguy, P.

1980-01-01

Although nuclear energy largely involves automatic protection systems enabling the effects of human error to be mitigated, the human factor still remains of extreme importance in nuclear risk analysis. Hence, the attainment of the high safety standards sought after for nuclear energy must of necessity entail staff training programmes which take into account the concern for nuclear safety. It is incumbent upon constructors and operators to evolve a training programme suited to each job, and the safety authorities are responsible for assessing whether the programme is satisfactory from the standpoint of safety and, where necessary, for issuing the relevant certificates or permits. The paper makes some comments on the cost of human error and the profitability of investment in training, on the importance of practical training and of the role of simulators, and on the need for operators to note and analyse all operational abnormalities, which are so often an advance warning of accidents. The training of special safety teams is examined, with consideration of three aspects: safety assessment, inspection, and action to be taken in the event of accident. Finally, some information is given on the human reliability studies under way and their implications for nuclear safety and training, with emphasis on the valuable assistance rendered in this matter by international organizations. (author)

Integrating team resource management program into staff training improves staff's perception and patient safety in organ procurement and transplantation: the experience in a university-affiliated medical center in Taiwan.

Science.gov (United States)

Hsu, Ya-Chi; Jerng, Jih-Shuin; Chang, Ching-Wen; Chen, Li-Chin; Hsieh, Ming-Yuan; Huang, Szu-Fen; Liu, Yueh-Ping; Hung, Kuan-Yu

2014-08-11

The process involved in organ procurement and transplantation is very complex that requires multidisciplinary coordination and teamwork. To prevent error during the processes, teamwork education and training might play an important role. We wished to evaluate the efficacy of implementing a Team Resource Management (TRM) program on patient safety and the behaviors of the team members involving in the process. We implemented a TRM training program for the organ procurement and transplantation team members of the National Taiwan University Hospital (NTUH), a teaching medical center in Taiwan. This 15-month intervention included TRM education and training courses for the healthcare workers, focused group skill training for the procurement and transplantation team members, video demonstration and training, and case reviews with feedbacks. Teamwork culture was evaluated and all procurement and transplantation cases were reviewed to evaluate the application of TRM skills during the actual processes. During the intervention period, a total of 34 staff members participated the program, and 67 cases of transplantations were performed. Teamwork framework concept was the most prominent dimension that showed improvement from the participants for training. The team members showed a variety of teamwork behaviors during the process of procurement and transplantation during the intervention period. Of note, there were two potential donors with a positive HIV result, for which the procurement processed was timely and successfully terminated by the team. None of the recipients was transplanted with an infected organ. No error in communication or patient identification was noted during review of the case records. Implementation of a Team Resource Management program improves the teamwork culture as well as patient safety in organ procurement and transplantation.

Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…

Hazardous Materials Management and Emergency Response training Center needs assessment

International Nuclear Information System (INIS)

McGinnis, K.A.; Bolton, P.A.; Robinson, R.K.

1993-09-01

For the Hanford Site to provide high-quality training using simulated job-site situations to prepare the 4,000 Site workers and 500 emergency responders for known and unknown hazards a Hazardous Materials Management and Emergency Response Training Center is needed. The center will focus on providing classroom lecture as well as hands-on, realistic training. The establishment of the center will create a partnership among the US Department of Energy; its contractors; labor; local, state, and tribal governments; and Xavier and Tulane Universities of Louisiana. This report presents the background, history, need, benefits, and associated costs of the proposed center

[Patient safety in education and training of healthcare professionals in Germany].

Science.gov (United States)

Hoffmann, Barbara; Siebert, H; Euteneier, A

2015-01-01

In order to improve patient safety, healthcare professionals who care for patients directly or indirectly are required to possess specific knowledge and skills. Patient safety education is not or only poorly represented in education and examination regulations of healthcare professionals in Germany; therefore, it is only practiced rarely and on a voluntary basis. Meanwhile, several training curricula and concepts have been developed in the past 10 years internationally and recently in Germany, too. Based on these concepts the German Coalition for Patient Safety developed a catalogue of core competencies required for safety in patient care. This catalogue will serve as an important orientation when patient safety is to be implemented as a subject of professional education in Germany in the future. Moreover, teaching staff has to be trained and educational and training activities have to be evaluated. Patient safety education and training for (undergraduate) healthcare professional will require capital investment.

Maritime Safety and Security Challenges – 3D Simulation Based Training

Directory of Open Access Journals (Sweden)

Christoph Felsenstein

2013-09-01

Full Text Available Maritime Safety and Security on board ships very much depends on well trained crews. That is why training and exercising emergency response procedures as well as efficiency in reliable management are extremely necessary. On the other hand research as well as technological development in safety and security, tools and other kinds of technical and organizational systems contribute to further improvement and guarantee high levels of safety and security in maritime transportation. Simulation facilities are essential for both exercising and training but also for research and technological development. This paper introduces the innovative concept of a safety and security training simulator (SST7 and describes research work related to the implementation of training scenarios. Selected results of a case study will be presented. A shorter version of this paper was originally presented at the International Conference on “Marine Navigation and Safety of Sea Transportation” at Gdynia in June 2013.

SafetyNet. Human factors safety training on the Internet

DEFF Research Database (Denmark)

Hauland, G.; Pedrali, M.

2002-01-01

This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

Safety Training: scheduled sessions in March

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 08-MAR-11 (08.30 – 10.00) in English 08-MAR-11 (10.30 – 12.00) in French 15-MAR-11 (08.30 – 10.00) in French 15-MAR-11 (10.30 – 12.00) in French 17-MAR-11 (08.30 – 10.00) in English 17-MAR-11 (10.30 – 12.00) in English 22-MAR-11 (08.30 – 10.00) in French 22-MAR-11 (10.30 – 12.00) in French 24-MAR-11 (08.30 – 10.00) in French 24-MAR-11 (10.30 – 12.00) in French 29-MAR...

Safety Training: scheduled sessions in May

CERN Multimedia

Isabelle Cusato (HSE Unit)

2011-01-01

The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year.   Biocell Training 10-MAY-11 (08.30 – 10.00) in French 10-MAY-11 (10.30 – 12.00) in French 12-MAY-11 (08.30 – 10.00) in English 12-MAY-11 (10.30 – 12.00) in English 19-MAY-11 (08.30 – 10.00) in French 19-MAY-11 (10.30 – 12.00) in French 24-MAY-11 (08.30 – 10.00) in English 24-MAY-11 (10.30 – 12.00) in English   Champs Magnétiques 13-MAY-11 (09.30 – 11.30) in French...

Computer-Based Training in Eating and Nutrition Facilitates Person-Centered Hospital Care: A Group Concept Mapping Study.

Science.gov (United States)

Westergren, Albert; Edfors, Ellinor; Norberg, Erika; Stubbendorff, Anna; Hedin, Gita; Wetterstrand, Martin; Rosas, Scott R; Hagell, Peter

2018-04-01

Studies have shown that computer-based training in eating and nutrition for hospital nursing staff increased the likelihood that patients at risk of undernutrition would receive nutritional interventions. This article seeks to provide understanding from the perspective of nursing staff of conceptually important areas for computer-based nutritional training, and their relative importance to nutritional care, following completion of the training. Group concept mapping, an integrated qualitative and quantitative methodology, was used to conceptualize important factors relating to the training experiences through four focus groups (n = 43), statement sorting (n = 38), and importance rating (n = 32), followed by multidimensional scaling and cluster analysis. Sorting of 38 statements yielded four clusters. These clusters (number of statements) were as follows: personal competence and development (10), practice close care development (10), patient safety (9), and awareness about the nutrition care process (9). First and second clusters represented "the learning organization," and third and fourth represented "quality improvement." These findings provide a conceptual basis for understanding the importance of training in eating and nutrition, which contributes to a learning organization and quality improvement, and can be linked to and facilitates person-centered nutritional care and patient safety.

Experience with performance based training of nuclear criticality safety engineers

International Nuclear Information System (INIS)

Taylor, R.G.

1993-01-01

Historically, new entrants to the practice of nuclear criticality safety have learned their job primarily by on-the-job training (OJT) often by association with an experienced nuclear criticality safety engineer who probably also learned their job by OJT. Typically, the new entrant learned what he/she needed to know to solve a particular problem and accumulated experience as more problems were solved. It is likely that more formalism will be required in the future. Current US Department of Energy requirements for those positions which have to demonstrate qualification indicate that it should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis i's incompletely developed in some areas. Details of this analysis are provided in this report

Nuclear Criticality Safety Organization training implementation. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program

Nuclear Criticality Safety Organization training implementation. Revision 4

Energy Technology Data Exchange (ETDEWEB)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-05-19

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program.

Improvement of quality with Nuclear Power Training Center (NTC) operator training

International Nuclear Information System (INIS)

Matsumoto, Y.

2005-01-01

Nuclear Power Training Center (NTC) was established in 1972 for PWR operator training. As the result of introduction of quality assurance management into NTC operator training, it became possible to confirm each step of systematic approach to training (SAT) process and then feedback process became clearer. Simulation models were modified based on domestic or overseas accidents cases and so training was improved using simulators closer to actual plants. Also a new multipurpose simulator with modified reactor coolant system (RCS) visual display device (RVD) and parameter-event-log (PEL) device was introduced in 2003 to provide more information so as to upgrade knowledge level of operators. (T. Tanaka)

Effect of the interval of training course on understanding of radiation safety and an improvement of re-training course

International Nuclear Information System (INIS)

Miyoshi, Hirokazu; Yamamoto, Yasuyo; Adachi, Akio

2005-01-01

Radiation safety training courses are indispensable educational programs for radiation workers. We have two kinds of courses, which are held before use of radioisotope (beginner's training course) and held annually (re-training course). The interval between two courses was found to give some effects for radiation worker's recognition and knowledge on radiation safety through the result of examination and questionnaire on the radiation safety after training. The average scores of participants indicated that the short interval (3 months) was better than the long interval (almost one year). Furthermore, the average scores of participants in the 2003 training course were higher than those in the 2002 and 2001 training courses. Several participants were found to lack in the basic radiation safety attitude and knowledge. In order to improve these results, the practical training should be given additionally for workers, who lacked in understanding. (author)

Examining learner-centered training with teen volunteer staff at an aquarium

Science.gov (United States)

Bautista, Raelene M.

This research project examined the effects of a training program that focused on helping youth volunteers create a learner-centered interaction at an Aquarium. This study explored whether this learner centered training resulted in an increased ability to identify learner-centered engagement as well as reported changes in practice. Most research on training programs and professional development, that introduces learner-centered strategies examines adult teachers working in formal environments. This study examined youth volunteer staff in an informal science institution that participated in a weekly one-hour training for four weeks during their eight week long summer volunteer program. The data showed that some of topics introduced in the learner centered training, such as the importance of visitors' prior knowledge and the use of objects, were identified more often as good practice after the training. In addition, participants seemed to hold on to some of their original perceptions of good practices, such as providing positive reinforcement and modifying their physical posture to make the visitors feel comfortable. The investigation also revealed that conversation patterns changed in some participants' practice as a result of the training.

The Dread Factor: How Hazards and Safety Training Influence Learning and Performance

Science.gov (United States)

Burke, Michael J.; Salvador, Rommel O.; Smith-Crowe, Kristin; Chan-Serafin, Suzanne; Smith, Alexis; Sonesh, Shirley

2011-01-01

On the basis of hypotheses derived from social and experiential learning theories, we meta-analytically investigated how safety training and workplace hazards impact the development of safety knowledge and safety performance. The results were consistent with an expected interaction between the level of engagement of safety training and hazardous…

Nuclear criticality safety: 2-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1992-11-01

This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: (1) be able to define terms commonly used in nuclear criticality safety; (2) be able to appreciate the fundamentals of nuclear criticality safety; (3) be able to identify factors which affect nuclear criticality safety; (4) be able to identify examples of criticality controls as used at Los Alamos; (5) be able to identify examples of circumstances present during criticality accidents; (6) have participated in conducting two critical experiments

A systematic review of the effectiveness of occupational health and safety training.

Science.gov (United States)

Robson, Lynda S; Stephenson, Carol M; Schulte, Paul A; Amick, Benjamin C; Irvin, Emma L; Eggerth, Donald E; Chan, Stella; Bielecky, Amber R; Wang, Anna M; Heidotting, Terri L; Peters, Robert H; Clarke, Judith A; Cullen, Kimberley; Rotunda, Cathy J; Grubb, Paula L

2012-05-01

Training is regarded as an important component of occupational health and safety (OHS) programs. This paper primarily addresses whether OHS training has a beneficial effect on workers. The paper also examines whether higher engagement OHS training has a greater effect than lower engagement training. Ten bibliographic databases were searched for pre-post randomized trial studies published in journals between 1996 and November 2007. Training interventions were included if they were delivered to workers and were concerned with primary prevention of occupational illness or injury. The methodological quality of each relevant study was assessed and data was extracted. The impacts of OHS training in each study were summarized by calculating the standardized mean differences. The strength of the evidence on training's effectiveness was assessed for (i) knowledge, (ii) attitudes and beliefs, (iIi) behaviors, and (iv) health using the US Centers for Disease Control and Prevention's Guide to Community Preventive Services, a qualitative evidence synthesis method. Twenty-two studies met the relevance criteria of the review. They involved a variety of study populations, occupational hazards, and types of training. Strong evidence was found for the effectiveness of training on worker OHS behaviors, but insufficient evidence was found of its effectiveness on health (ie, symptoms, injuries, illnesses). The review team recommends that workplaces continue to deliver OHS training to employees because training positively affects worker practices. However, large impacts of training on health cannot be expected, based on research evidence.

Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. SAFETY TRAINING Laetitia Laddada tel. 73811 - 79236 safety.training@cern.ch Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 11 mars 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Clemente Pilly et Ribordy Marion de « PM postures...

Challenges in developing competency-based training curriculum for food safety regulators in India

Directory of Open Access Journals (Sweden)

Anitha Thippaiah

2014-01-01

Full Text Available Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1 Identify the competencies needed among the food regulatory workforce in India. 2 Develop a competency-based training curriculum for food safety regulators in the country. 3 Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level, II and III (Retail/ Catering/ Manufacturing were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

Natural Gas Vehicle Cylinder Safety, Training and Inspection Project

Energy Technology Data Exchange (ETDEWEB)

Hank Seiff

2008-12-31

Under the auspices of the National Energy Technology Laboratory and the US Department of Energy, the Clean Vehicle Education Foundation conducted a three-year program to increase the understanding of the safe and proper use and maintenance of vehicular compressed natural gas (CNG) fuel systems. High-pressure fuel systems require periodic inspection and maintenance to insure safe and proper operation. The project addressed the needs of CNG fuel containers (cylinders) and associated high-pressure fuel system components related to existing law, codes and standards (C&S), available training and inspection programs, and assured coordination among vehicle users, public safety officials, fueling station operators and training providers. The program included a public and industry awareness campaign, establishment and administration of a cylinder inspector certification training scholarship program, evaluation of current safety training and testing practices, monitoring and investigation of CNG vehicle incidents, evaluation of a cylinder recertification program and the migration of CNG vehicle safety knowledge to the nascent hydrogen vehicle community.

Experience with performance based training of nuclear criticality safety engineers

International Nuclear Information System (INIS)

Taylor, R.G.

1993-01-01

For non-reactor nuclear facilities, the U.S. Department of Energy (DOE) does not require that nuclear criticality safety engineers demonstrate qualification for their job. It is likely, however, that more formalism will be required in the future. Current DOE requirements for those positions which do have to demonstrate qualification indicate that qualification should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis is incompletely developed in some areas

Evaluating the effectiveness of a logger safety training program.

Science.gov (United States)

Bell, Jennifer L; Grushecky, Shawn T

2006-01-01

Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections

Improving staff perception of a safety climate with crew resource management training.

Science.gov (United States)

Kuy, SreyRam; Romero, Ramon A L

2017-06-01

Communication failure is one of the top root causes in patient safety adverse events. Crew resource management (CRM) is a team building communication process intended to improve patient safety by improving team dynamics. First, to describe implementation of CRM in a Veterans Affair (VA) surgical service. Second, to assess whether staff CRM training is related to improvement in staff perception of a safety climate. Mandatory CRM training was implemented for all surgical service staff at a VA Hospital at 0 and 12 mo. Safety climate questionnaires were completed by operating room staff at a baseline, 6 and 12 mo after the initial CRM training. Participants reported improvement on all 27 points on the safety climate questionnaire at 6 mo compared with the baseline. At 12 mo, there was sustained improvement in 23 of the 27 areas. This is the first published report about the effect of CRM training on staff perception of a safety climate in a VA surgical service. We demonstrate that CRM training can be successfully implemented widespread in a surgical program. Overall, there was improvement in 100% of areas assessed on the safety climate questionnaire at 6 mo after CRM training. By 1 y, this improvement was sustained in 23 of 27 areas, with the areas of greatest improvement being the performance of briefings, collaboration between nurses and doctors, valuing nursing input, knowledge about patient safety, and institutional promotion of a patient safety climate. Published by Elsevier Inc.

The effect of training and job interruptions on logging crews' safety in ...

African Journals Online (AJOL)

The effect of training and job interruptions on logging crews' safety in ... method, experienced and inexperienced crews were studied before training, after ... that provision of appropriate safety gears as well as delivery of on job training are ...

NDE training activities at the EPRI NDE center

International Nuclear Information System (INIS)

Anon.

1987-01-01

The need for an industry-wide qualification for NDE personnel is becoming more evident in both in-service inspection and technical skills training. ASME Section XI requirements for the qualification and certification of visual, ultrasonic, and eddy current examines is one of the major areas being supported by training at the Center. The other major thrust is in response to the Boiling Water Reactor Owners Group and its recognition of the importance of the UT operator's accurately detecting, discriminating, and sizing intergranular stress corrosion cracks (IGSCC) in piping, and inspecting weld overlay repairs of these cracked pipes. In addition, the pressurized water reactor (PWR) utilities have recognized the importance of improved eddy current data analysis of steam generator tubing. The overall intent of the Center's training is to meet the most critical utility needs with quality training that can be used by the trainee's employer as a part of its certification of that individual. To do this, the Center has organized and activated a carefully maintained documentation and records system built around the Continuing Education Unit (CEU). To address the problem of the small supply of entry-level NDE personnel available to the utilities, the Center has developed, through its Human Resource Development, academic and utility co-op programs to generate guidelines and NDE teaching materials for high schools, technical schools, and universities

Findings from Survey Administered to Weatherization Training Centers

Energy Technology Data Exchange (ETDEWEB)

Conlon, Brian [Univ. of Tennessee, Knoxville, TN (United States); Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-03-01

This report summarizes results of a survey administered to directors of weatherization training centers that receive funding from the U.S. Department of Energy. The survey presents results related to questions on training offered and future plans.

Millwright Apprenticeship. Related Training Modules. 1.1-1.8 Safety.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains eight modules covering safety. The modules provide information on the following topics: general safety, hand tool safety, power tool safety, fire safety, hygiene, safety and electricity, types of fire and fire prevention, and…

Swiss-Slovak cooperation program: a training strategy for safety analyses

International Nuclear Information System (INIS)

Husarcek, J.

2000-01-01

During the 1996-1999 period, a new training strategy for safety analyses was implemented at the Slovak Nuclear Regulatory Authority (UJD) within the Swiss-Slovak cooperation programme in nuclear safety (SWISSLOVAK). The SWISSLOVAK project involved the recruitment, training, and integration of the newly established team into UJD's organizational structure. The training strategy consisted primarily of the following two elements: a) Probabilistic Safety Analysis (PSA) applications (regulatory review and technical evaluation of Level-1/Level-2 PSAs; PSA-based operational events analysis, PSA applications to assessment of Technical Specifications; and PSA-based hardware and/or procedure modifications) and b) Deterministic accident analyses (analysis of accidents and regulatory review of licensee Safety Analysis Reports; analysis of severe accidents/radiological releases and the potential impact of the containment and engineered safety systems, including the development of technical bases for emergency response planning; and application of deterministic methods for evaluation of accident management strategies/procedure modifications). The paper discusses the specific aspects of the training strategy performed at UJD in both the probabilistic and deterministic areas. The integration of team into UJD's organizational structure is described and examples of contributions of the team to UJD's statutory responsibilities are provided. (author)

Cycling in the African American Community : safety training guidelines and findings.

Science.gov (United States)

2013-08-01

This report is a program users manual for the Cycling in the African American Community (CAAC) safety training intervention. The CAAC safety training intervention was designed to nudge more African Americans, who are often beginning cyclists...

Safety and economic study of special trains

International Nuclear Information System (INIS)

Loscutoff, W.V.; Hall, R.J.

1976-01-01

A comparative evaluation is being conducted of the safety and economics of special (35 mph and less) and regular trains for shipment of spent fuels. The approach, pertinent considerations, and results to date are discussed. The preliminary conclusion is that special train requirements have potential for only a small reduction in the accident likelihood, while increasing the cost

How many employees receive safety training during their first year of a new job?

Science.gov (United States)

Smith, Peter M; Mustard, Cameron A

2007-02-01

To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Three repeated national Canadian cross-sectional surveys. 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Receiving occupational health and safety training, orientation training or office or non-office equipment training in either a classroom or on-the-job in the previous 12 months. Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium-sized workplaces and in manufacturing, and men in large workplaces and in part-time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries.

Ionising radiation safety training in the Australian Defence Organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1998-01-01

Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation. However, most are designated as radiation protection officers as a secondary duty. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A Training Course, responding to these requirements, has been developed to emphasize, basic radiation theory and protection, operation of radiation monitors available in the ADO, an understanding of the Ionising Radiation Safety Manual, day-to-day radiation safety in units and establishments, and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved successful, both for the students and the ADO generally. To seek national accreditation of the course through the Australian National Training Authority, as a first step, competency standards have been proposed. (authors)

20 CFR 670.505 - What types of training must Job Corps centers provide?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What types of training must Job Corps centers... Operations § 670.505 What types of training must Job Corps centers provide? (a) Job Corps centers must... necessary for those jobs, and as appropriate, recommend changes in the center's vocational training program...

Building patient safety in intensive care nursing : Patient safety culture, team performance and simulation-based training

OpenAIRE

Ballangrud, Randi

2013-01-01

Aim: The overall aim of the thesis was to investigate patient safety culture, team performance and the use of simulation-based team training for building patient safety in intensive care nursing. Methods: Quantitative and qualitative methods were used. In Study I, 220 RNs from ten ICUs responded to a patient safety culture questionnaire analysed with statistics. Studies II-IV were based on an evaluation of a simulation-based team training programme. Studies II-III included 53 RNs from seven I...

Critical safety parameters: The logical approach to refresher training

International Nuclear Information System (INIS)

Johnson, A.R.; Pilkington, W.; Turner, S.

1991-01-01

Nuclear power plant managers must ensure that control room staff are able to perform effectively. This is of particular importance through the longer term after initial authorization. Traditionally refresher training has been based on delivery of fragmented training packages typically derived from the initial authorization training programs. Various approaches have been taken to provide a more integrated refresher training program. However, methods such as job and task analysis and subject matter expert derived training have tended to develop without a focused clear overall training objective. The primary objective of all control room staff training is to ensure a proper and safe response to all plant transients. At the Point Lepreau Nuclear Plant, this has defined the Critical Safety Parameter based refresher training program. The overall objective of the Critical Safety Parameter training program is to ensure that control room staff can monitor and control a discrete set of plant parameters. Maintenance of the selected parameters within defined boundaries assures adequate cooling of the fuel and containment of radioactivity. Control room staff need to be able to reliably respond correctly to plant transients under potentially high stress conditions,. utilizing the essential knowledge and skills to deal with such transients. The inference is that the knowledge and skills must be limited to that which can be reliably recalled. This paper describes how the Point Lepreau Nuclear Plant has developed a refresher training program on the basis of a limited number of Critical Safety Parameters. Through this approach, it has been possible to define the essential set of knowledge and skills which ensures a correct response to plant transients

SAFETY CONSIDERATIONS WITH BLOOD FLOW RESTRICTED RESISTANCE TRAINING

Directory of Open Access Journals (Sweden)

Alan Kacin

2015-11-01

Full Text Available Blood flow restricted resistance (BFRR training with pneumatic tourniquet has been suggested as an alternative for conventional weight training due to the proven benefits for muscle strength and hypertrophy using relatively low resistance, hence reducing the mechanical stress across a joint. As such, it has become an important part of rehabilitation programs used in either injured or operated athletes. Despite a general consensus on effectiveness of BFRR training for muscle conditioning, there are several uncertainties regarding the interplay of various extrinsic and intrinsic factors on its safety and efficiency, which are being reviewed from a clinical perspective. Among extrinsic factors tourniquet cuff pressure, size and shape have been identified as key for safety and efficiency. Among intrinsic factors, limb anthropometrics, patient history and presence of cardiac, vascular, metabolic or peripheral neurologic conditions have been recognized as most important. Though there are a few potential safety concerns connected to BFRR training, the following have been identified as the most probable and health-hazardous: (a mechanical injury to the skin, muscle, and peripheral nerves, (b venous thrombosis due to vascular damage and disturbed hemodynamics and (c augmented arterial blood pressure responses due to combined high body exertion and increased peripheral vascular resistance. Based on reviewed literature and authors’ personal experience with the use of BFRR training in injured athletes, some guidelines for its safe application are outlined. Also, a comprehensive risk assessment tool for screening of subjects prior to their inclusion in a BFRR training program is being introduced.

Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel. That is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes

Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel; that is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes

How many employees receive safety training during their first year of a new job?

Science.gov (United States)

Smith, Peter M; Mustard, Cameron A

2007-01-01

Objective To describe the provision of safety training to Canadian employees, specifically those in their first year of employment with a new employer. Design Three repeated national Canadian cross‐sectional surveys. Subjects 59 159 respondents from Statistics Canada's Workplace and Employee Surveys (1999, 2001 and 2003), 5671 who were in their first year of employment. Main outcome Receiving occupational health and safety training, orientation training or office or non‐office equipment training in either a classroom or on‐the‐job in the previous 12 months. Results Only 12% of women and 16% of men reported receiving safety training in the previous 12 months. Employees in their first 12 months of employment were more likely to receive safety training than employees with >5 years of job tenure. However, still only one in five new employees had received any safety training while with their current employer. In a fully adjusted regression model, employees who had access to family and support programs, women in medium‐sized workplaces and in manufacturing, and men in large workplaces and in part‐time employment all had an increased probability of receiving safety training. No increased likelihood of safety training was found in younger workers or those in jobs with higher physical demands, both of which are associated with increased injury risk. Conclusions From our results, it would appear that only one in five Canadian employees in their first year of a new job received safety training. Further, the provision of safety training does not appear to be more prevalent among workers or in occupations with increased risk of injuries. PMID:17296687

Validity of your safety awareness training

CERN Multimedia

DG Unit

2010-01-01

AIS is setting up an automatic e-mail reminder system for safety training. You are invited to forward this message to everyone concerned. Reminder: Please check the validity of your Safety courses Since April 2009 the compulsory basic Safety awareness courses (levels 1, 2 and 3) have been accessible on a "self-service" basis on the web (see CERN Bulletin). Participants are required to pass a test at the end of each course. The test is valid for 3 years so courses must be repeated on a regular basis. A system of automatic e-mail reminders already exists for level 4 courses on SIR and will be extended to the other levels shortly. The number of levels you are required to complete depends on your professional category. Activity Personnel concerned Level 1 Level 2 Level 3 Level 4     Basic safety Basic Safety ...

Training in nuclear and radiation safety in Latin American and Caribbean; Capacitacion en seguridad nuclear y radiologica en America Latina y el Caribe

Energy Technology Data Exchange (ETDEWEB)

Papadopulos, S.; Diaz, O.; Larcher, A.; Echenique, L.; Nicolas, R., E-mail: spapadopulos@arn.gob.ar, E-mail: odiaz@arn.gob.ar, E-mail: alarcher@arn.gob.ar, E-mail: lechenique@arn.gob.ar, E-mail: rnicolas@arn.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina); Lombardi, R.; Quintana, G., E-mail: alombar@fi.uba, E-mail: quinta@fi.uba.ar [Universidad de Buenos Aires (FI/UBA), (Argentina). Facultad de Ingenieria

2013-07-01

From thirty-three years, Argentina has taken the commitment to train professionals in the field of nuclear and radiation safety for the care and protection of workers and public in general. Sponsored by the IAEA and supported by the Faculty of Engineering of the University of Buenos Aires (FIUBA), an undertaking was made to encourage the training of scientists and experts in the countries of the region in order to establish a strong safety culture in radiation in individuals and maintaining high standards of safety practices using ionizing radiation. In 2012, the Graduate Course in Radiation Protection and Safety of Radiation Sources has acquired the status of 'Specialization' of the FIUBA, a category that further hierarchies skills training in the subject. This is a highly anticipated achievement by the implications for academic institutions, national and regional level, contributing to the strengthening of the Regional Training Center for Latin America and the Caribbean, acknowledged in a long-term agreement between the IAEA and Argentina in September 2008. Due to increased demand for nuclear activity, it is important to continue and deepen further training in radiological and nuclear areas. In order to satisfy both national and regional needs a process of increase on training offer training is being carried out, under the jurisdiction frame of the Nuclear Regulatory Authority. This paper presents the achievements of the country so far as regards training of human resource in radiation protection and nuclear safety in the region and highlights the challenges ahead for the extension of the offer in education and training. (author)

Activities and cooperation opportunities at Cekmece Nuclear Research and Training Center

International Nuclear Information System (INIS)

Can, S.

2004-01-01

Turkey's familiarization with nuclear energy began in July 1955, when it signed a bilateral agreement with the USA to cooperate in the 'peaceful uses of nuclear energy'. In 1956, the Turkish Atomic Energy Commission (TAEK) was created. Cekmece Nuclear Research and Training Center (CNAEM) was formally established in 1962. Turkey's first research reactor, a pool-type 1 MW reactor at CNAEM site, known as TR-1, went critical in 1962 and was shut down in September 1977. Strong collaborations with national and international organizations have been achieved for the promotion of the peaceful uses of nuclear energy and its applications in Turkey. Meanwhile the TR-2 reactor (5 MW) was commissioned in 1984 in order to meet the increasing demand of radioisotopes.CNAEM as a subsidiary of TAEK is charged to perform R and D activities on whole area of nuclear science and technology, such as research reactor, nuclear safety, nuclear fuel technology and fuel analysis codes, nuclear materials, NDT, nuclear electronics, accelerator, radiobiology, cytogenetics (bio dosimetry), radioecology, marine radioactivity, radiation safety, dosimetry, radioactive waste management, calibration of nuclear instruments, environmental monitoring. Possible cooperation fields between CNAEM and other institutions are as follows: measurements of radioactivity in the environment, radioecological studies of radioactivity levels in environmental samples, indoor radon measurements, development and production of radiopharmaceuticals, radiation cytogenetics (bio dosimetry), training in NDT, certification of industrial workers who use non-destructive testing devices, production of UO 2 and (U,Th)O 2 based fuel material, development and construction of radiation measurement instrument, analysis of all kind of uranium and thorium, training on processing and storage of low level radioactive waste

Activities and cooperation opportunities at Cekmece nuclear research and training center

International Nuclear Information System (INIS)

Can, S.

2004-01-01

Full text: Turkey's familiarization with nuclear energy began in July 1955, when it signed a bilateral agreement with the USA to cooperate in the p eaceful uses of nuclear energy . In 1956, the Turkish Atomic Energy Commission (TAEK) was created. Cekmece Nuclear Research and Training Center (CNAEM) was formally established in 1962. Turkey's first research reactor, a pool-type 1 MW reactor at CNAEM site, known as TR-1, went critical in 1962 and was shut down in September 1977. Strong collaborations with national and international organizations have been achieved for the promotion of the peaceful uses of nuclear energy and its applications in Turkey. Meanwhile the TR-2 reactor (5 MW) was commissioned in 1984 in order to meet the increasing demand of radioisotopes.CNAEM as a subsidiary of TAEK is charged to perform R and D activities on whole area of nuclear science and technology, such as research reactor, nuclear safety, nuclear fuel technology and fuel analysis codes, nuclear materials, NDT, nuclear electronics, accelerator, radiobiology, cytogenetics (bio dosimetry), radioecology, marine radioactivity, radiation safety, dosimetry, radioactive waste management, calibration of nuclear instruments, environmental monitoring. Possible cooperation fields between CNAEM and other institutions are as follows: measurements of radioactivity in the environment, radioecological studies of radioactivity levels in environmental samples, indoor radon measurements, development and production of radiopharmaceuticals, radiation cytogenetics (bio dosimetry), training in NDT, certification of industrial workers who use non-destructive testing devices, production of UO 2 and (U,Th)O 2 based fuel material, development and construction of radiation measurement instrument, analysis of all kind of uranium and thorium, training on processing and storage of low level radioactive waste

Ionising radiation safety training in the Australian defence organisation (ADO)

International Nuclear Information System (INIS)

Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

1996-01-01

Full text: Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation, while others may be designated as radiation protection officers in remote units with few duties to perform in this role. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A training course, responding to these requirements, has been developed to emphasise: basic radiation theory and protection; operation of radiation monitors available in the ADO; an understanding of the Safety Manual; day-to-day radiation safety in units and establishments; and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved sufficiently successful, both for the students and the ADO generally, to seek national accreditation through the Australian National Training Authority and, as a first step, competency standards have been identified

Occupational safety and health education and training for underserved populations.

Science.gov (United States)

O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

2014-01-01

This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

Promoting individual learning for trainees with perceived high helplessness: experiences of a safety training program.

Science.gov (United States)

Kiani, Fariba; Khodabakhsh, Mohamad Reza

2014-01-01

The article arises from a research project investigating the effectiveness of safety training on changing attitudes toward safety issues. Followed by the training intervention was observed that employees' helplessness decreased. The researchers have come to the idea of investigating how safety training can reduce perceived helplessness. Thus, this research examined the effectiveness of safety training on reducing employees' helplessness with attention to the mediating role of attitude toward safety issues. The current study was an experimental study with the control group. A total of 204 (101 experimental group and 103 control group) completed safety attitude questionnaire and perceived helplessness before a safety training course including four 90-min sessions over 4 consecutive days in Esfahan Steel Company in 2012 between October and December. Only members of the experimental group participated in this course. These questionnaires, approximately 30 days later, again were run on members of both groups. Data were analyzed using descriptive indexes, t-, and F-test. RESULTS by comparing the two groups showed that safety training was effective only on individuals with perceived low helplessness (p = 0.02). In individuals with perceived high helplessness, safety training only with changing safety attitudes can reduce the perceived helplessness.

Criticality safety training at Westinghouse Hanford Company

International Nuclear Information System (INIS)

Rogers, C.A.; Paglieri, J.N.

1983-01-01

In 1972 the Westinghouse Hanford Company (WHC) established a comprehensive program to certify personnel who handle fissionable materials. As the quantity of fissionable material handled at WHC has increased so has the scope of training to assure that all employes perform their work in a safe manner. This paper describes training for personnel engaged in fuel fabrication and handling activities. Most of this training is provided by the Fissionable Material Handlers Certification Program. This program meets or exceeds all DOE requirements for training and has been attended by more than 475 employes. Since the program was instituted, the rate of occurrence of criticality safety limit violations has decreased by 50%

The first symposium of Research Center for Radiation Safety, NIRS. Perspective of future studies of radiation safety

International Nuclear Information System (INIS)

Shimo, Michikuni

2002-03-01

This paper summarizes presentations given in the title symposium, held at the Conference Room of National Institute of Radiological Sciences (NIRS) on November 29 and 30, 2001. Contained are Introductory remarks: Basic presentations concerning exposure dose in man; Environmental levels of radiation and radioactivity, environmental radon level and exposure dose, and radiation levels in the specific environment (like in the aircraft): Special lecture (biological effects given by space environment) concerning various needs for studies of radiation safety; Requirement for open investigations, from the view of utilization, research and development of atomic energy, from the clinical aspect, and from the epidemiological aspect: Special lecture (safety in utilization of atomic energy and radiation-Activities of Nuclear Safety Commission of Japan) concerning present state and perspective of studies of radiation safety; Safety of radiation and studies of biological effects of radiation-perspective, and radiation protection and radiation safety studies: Studies in the Research Center for Radiation Safety; Summary of studies in the center, studies of the biological effects of neutron beam, carcinogenesis by radiation and living environmental factors-complicated effects, and studies of hereditary effects: Panel discussion (future direction of studies of radiation safety for the purpose of the center's direction): and concluding remarks. (N.I.)

The Armstrong Institute: An Academic Institute for Patient Safety and Quality Improvement, Research, Training, and Practice.

Science.gov (United States)

Pronovost, Peter J; Holzmueller, Christine G; Molello, Nancy E; Paine, Lori; Winner, Laura; Marsteller, Jill A; Berenholtz, Sean M; Aboumatar, Hanan J; Demski, Renee; Armstrong, C Michael

2015-10-01

Academic medical centers (AMCs) could advance the science of health care delivery, improve patient safety and quality improvement, and enhance value, but many centers have fragmented efforts with little accountability. Johns Hopkins Medicine, the AMC under which the Johns Hopkins University School of Medicine and the Johns Hopkins Health System are organized, experienced similar challenges, with operational patient safety and quality leadership separate from safety and quality-related research efforts. To unite efforts and establish accountability, the Armstrong Institute for Patient Safety and Quality was created in 2011.The authors describe the development, purpose, governance, function, and challenges of the institute to help other AMCs replicate it and accelerate safety and quality improvement. The purpose is to partner with patients, their loved ones, and all interested parties to end preventable harm, continuously improve patient outcomes and experience, and eliminate waste in health care. A governance structure was created, with care mapped into seven categories, to oversee the quality and safety of all patients treated at a Johns Hopkins Medicine entity. The governance has a Patient Safety and Quality Board Committee that sets strategic goals, and the institute communicates these goals throughout the health system and supports personnel in meeting these goals. The institute is organized into 13 functional councils reflecting their behaviors and purpose. The institute works daily to build the capacity of clinicians trained in safety and quality through established programs, advance improvement science, and implement and evaluate interventions to improve the quality of care and safety of patients.

The German simulator center for the training of nuclear power plant operators

International Nuclear Information System (INIS)

Hoffmann, E.

1996-01-01

Simulator training for nuclear power plant operators in Germany is conducted in The Simulator Center in Essen. The companies operating The Center are KSG/GfS. KSG provides simulators, GfS performs the training. The German Simulator Center is equipped with five simulators in training, nine simulators are under construction and will be ready for training until the beginning of 1997. This institution serves 22 nuclear power plants units in Germany, Switzerland (NPP Goesgen-Daeniken) and the Netherlands (NPP Borssele) and trains 1,800 persons every year. As a common enterprise the company is owned by 12 utilities, which leads to the necessity to prepare common rules and guidelines for simulator specification, training of instructors, assessment of trainees, training material and preparation and methodical running of simulator courses

The effect of injection safety training on knowledge and attitude of ...

African Journals Online (AJOL)

Background: Studies have shown poor injection safety practices among health workers in Nigeria and this was adduced to lack of adequate training on injection safety practices. Objective: The study assessed the effect of the training intervention on the knowledge and attitude of primary healthcare workers on injection ...

International nuclear safety center database on material properties

International Nuclear Information System (INIS)

Fink, J.K.

1996-01-01

International nuclear safety center database on the following material properties is described: fuel, cladding,absorbers, moderators, structural materials, coolants, concretes, liquid mixtures, uranium dioxide

Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Lindsey, J.E.

1993-05-01

A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements.

Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

International Nuclear Information System (INIS)

Lindsey, J.E.

1993-05-01

A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements

Maritime Safety and Security Challenges – 3D Simulation Based Training

OpenAIRE

Christoph Felsenstein; Knud Benedict; Michael Baldauf

2013-01-01

Maritime Safety and Security on board ships very much depends on well trained crews. That is why training and exercising emergency response procedures as well as efficiency in reliable management are extremely necessary. On the other hand research as well as technological development in safety and security, tools and other kinds of technical and organizational systems contribute to further improvement and guarantee high levels of safety and security in maritime transportation. Simulation faci...

Safety Training: scheduled sessions in September and October 2011

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in September – October. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Alphabetical order (original course titles are maintained) Chemical Safety – Introduction 11-OCT-11, 9.00 – 11.30, in English Conduite de chariots élévateurs 17-OCT-11 to 18-OCT-11, 8.00 – 17.30, in French * Ergonomics - Applying ergonomic principles in the workplace 15-SEP-11, 9.00 – 12.30, in French 15-SEP-11, 14.00 – 17.30, in English Habilitation électrique : Personne...

Joint nuclear safety research projects between the US and Russian Federation International Nuclear Safety Centers

International Nuclear Information System (INIS)

Bougaenko, S.E.; Kraev, A.E.; Hill, D.L.; Braun, J.C.; Klickman, A.E.

1998-01-01

The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) formed international Nuclear Safety Centers in October 1995 and July 1996, respectively, to collaborate on nuclear safety research. Since January 1997, the two centers have initiated the following nine joint research projects: (1) INSC web servers and databases; (2) Material properties measurement and assessment; (3) Coupled codes: Neutronic, thermal-hydraulic, mechanical and other; (4) Severe accident management for Soviet-designed reactors; (5) Transient management and advanced control; (6) Survey of relevant nuclear safety research facilities in the Russian Federation; (8) Advanced structural analysis; and (9) Development of a nuclear safety research and development plan for MINATOM. The joint projects were selected on the basis of recommendations from two groups of experts convened by NEA and from evaluations of safety impact, cost, and deployment potential. The paper summarizes the projects, including the long-term goals, the implementing strategy and some recent accomplishments for each project

Stennis Space Center observes 2009 Safety and Health Day

Science.gov (United States)

2009-01-01

Sue Smith, a medical clinic employee at NASA's John C. Stennis Space Center, takes the temperature of colleague Karen Badon during 2009 Safety and Health Day activities Oct. 22. Safety Day activities included speakers, informational sessions and a number of displays on safety and health issues. Astronaut Dominic Gorie also visited the south Mississippi rocket engine testing facility during the day to address employees and present several Silver Snoopy awards for outstanding contributions to flight safety and mission success. The activities were part of an ongoing safety and health emphasis at Stennis.

Radiation protection training of radiation safety officers in Finland in 2008

International Nuclear Information System (INIS)

Havukainen, R.; Bly, R.; Markkanen, M.

2009-11-01

The Radiation and Nuclear Safety Authority (STUK) carried out a survey on the radiation protection training of radiation safety officers (RSO) in Finland in 2008. The aim of the survey was to obtain information on the conformity and uniformity of the training provided in different training organisations. A previous survey concerning radiation protection training was carried out in 2003. That survey determined the training needs of radiation users and radiation safety officers as well the radiation protection training included in vocational training and supplementary training. This report presents the execution and results of the survey in 2008. According to the responses, the total amount of RSO training fulfilled the requirements presented in Guide ST 1.8 in the most fields of competence. The emphasis of the RSO training differed between organisations, even for training in the same field of competence. Certain issues in Guide ST 1.8 were dealt quite superficially or even not at all in some training programmes. In some fields of competence, certain matters were entirely left to individual study. No practical training with radiation equipment or sources was included in the RSO training programme of some organisations. Practical training also varied considerably between organisations, even within the same field of competence. The duties in the use of radiation were often considered as practical training with radiation equipment and sources. Practical training from the point of view of a radiation safety officer was brought up in the responses of only one organisation. The number of questions and criteria for passing RSO exams also varied between organisations. Trainers who provided RSO training for the use of radiation in health care sectors had reached a higher vocational training level and received more supplementary training in radiation protection in the previous 5 years than trainers who provided RSO training for the use of radiation in industry, research, and

Continuing training program in radiation protection in biological research centers

International Nuclear Information System (INIS)

Escudero, R.; Hidalgo, R.M.; Usera, F.; Macias, M.T.; Mirpuri, E.; Perez, J.; Sanchez, A.

2008-01-01

The use of ionizing radiation in biological research has many specific characteristics. A great variety of radioisotopic techniques involve unsealed radioactive sources, and their use not only carries a risk of irradiation, but also a significant risk of contamination. Moreover, a high proportion of researchers are in training and the labor mobility rate is therefore high. Furthermore, most newly incorporated personnel have little or no previous training in radiological protection, since most academic qualifications do not include training in this discipline. In a biological research center, in addition to personnel whose work is directly associated with the radioactive facility (scientific-technical personnel, operators, supervisors), there are also groups of support personnel The use of ionizing radiation in biological research has many specific characteristics. A great variety of radioisotopic techniques involve unsealed radioactive sources, and their use not only carries a risk of irradiation, but also a significant risk of contamination. Moreover, a high proportion of researchers are in training and the labor mobility rate is therefore high. Furthermore, most newly incorporated personnel have little or no previous training in radiological protection, since most academic qualifications do not include training in this discipline. In a biological research center, in addition to personnel whose work is directly associated with the radioactive facility (scientific-technical personnel, operators, supervisors), there are also groups of support personnel maintenance and instrumentation workers, cleaners, administrative personnel, etc. who are associated with the radioactive facility indirectly. These workers are affected by the work in the radioactive facility to varying degrees, and they therefore also require information and training in radiological protection tailored to their level of interaction with the installation. The aim of this study was to design a

Demonstration of the LHC Safety Training Tunnel Mock-Up

CERN Multimedia

Brice, Maximilien

2014-01-01

Members of CERN's management visit the LHC tunnel mock-up at the Safety Training Centre on the Prévessin site. The facility is used to train personnel in emergency responses including the use of masks and safe evacuation.

Training and technical assistance to enhance capacity building between prevention research centers and their partners.

Science.gov (United States)

Spadaro, Antonia J; Grunbaum, Jo Anne; Dawkins, Nicola U; Wright, Demia S; Rubel, Stephanie K; Green, Diane C; Simoes, Eduardo J

2011-05-01

The Centers for Disease Control and Prevention has administered the Prevention Research Centers Program since 1986. We quantified the number and reach of training programs across all centers, determined whether the centers' outcomes varied by characteristics of the academic institution, and explored potential benefits of training and technical assistance for academic researchers and community partners. We characterized how these activities enhanced capacity building within Prevention Research Centers and the community. The program office collected quantitative information on training across all 33 centers via its Internet-based system from April through December 2007. Qualitative data were collected from April through May 2007. We selected 9 centers each for 2 separate, semistructured, telephone interviews, 1 on training and 1 on technical assistance. Across 24 centers, 4,777 people were trained in 99 training programs in fiscal year 2007 (October 1, 2006-September 30, 2007). Nearly 30% of people trained were community members or agency representatives. Training and technical assistance activities provided opportunities to enhance community partners' capacity in areas such as conducting needs assessments and writing grants and to improve the centers' capacity for cultural competency. Both qualitative and quantitative data demonstrated that training and technical assistance activities can foster capacity building and provide a reciprocal venue to support researchers' and the community's research interests. Future evaluation could assess community and public health partners' perception of centers' training programs and technical assistance.

[Evaluating training programs on occupational health and safety: questionnaire development].

Science.gov (United States)

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Plutonium safety training course

International Nuclear Information System (INIS)

Moe, H.J.

1976-03-01

This course seeks to achieve two objectives: to provide initial safety training for people just beginning work with plutonium, and to serve as a review and reference source for those already engaged in such work. Numerous references have been included to provide information sources for those wishing to pursue certain topics more fully. The first part of the course content deals with the general safety approach used in dealing with hazardous materials. Following is a discussion of the four properties of plutonium that lead to potential hazards: radioactivity, toxicity, nuclear properties, and spontaneous ignition. Next, the various hazards arising from these properties are treated. The relative hazards of both internal and external radiation sources are discussed, as well as the specific hazards when plutonium is the source. Similarly, the general hazards involved in a criticality, fire, or explosion are treated. Comments are made concerning the specific hazards when plutonium is involved. A brief summary comparison between the hazards of the transplutonium nuclides relative to 239 Pu follows. The final portion deals with control procedures with respect to contamination, internal and external exposure, nuclear safety, and fire protection. The philosophy and approach to emergency planning are also discussed

Classroom instruction versus roadside training in traffic safety education

NARCIS (Netherlands)

van Schagen, I; Rothengatter, J.A.

1997-01-01

This study compares the effectiveness of different approaches to training complex cognitive and psychomotor skills within the framework of road safety education for primary school children. A method involving roadside behavioral training, a classroom instruction method and a method combining these

Design of a Construction Safety Training System using Contextual Design Methodology

OpenAIRE

Baldev, Darshan H.

2006-01-01

In the U.S., the majority of construction companies are small companies with 10 or fewer employees (BLS, 2004). The fatality rate in the construction industry is high, indicating a need for implementing safety training to a greater extent. This research addresses two main goals: to make recommendations and design a safety training system for small construction companies, and to use Contextual Design to design the training system. Contextual Design was developed by Holtzblatt (Beyer and Holtzb...

Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

International Nuclear Information System (INIS)

Vance, W.F.

1979-01-01

A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices

International Nuclear Safety Center (INSC) database

International Nuclear Information System (INIS)

Sofu, T.; Ley, H.; Turski, R.B.

1997-01-01

As an integral part of DOE's International Nuclear Safety Center (INSC) at Argonne National Laboratory, the INSC Database has been established to provide an interactively accessible information resource for the world's nuclear facilities and to promote free and open exchange of nuclear safety information among nations. The INSC Database is a comprehensive resource database aimed at a scope and level of detail suitable for safety analysis and risk evaluation for the world's nuclear power plants and facilities. It also provides an electronic forum for international collaborative safety research for the Department of Energy and its international partners. The database is intended to provide plant design information, material properties, computational tools, and results of safety analysis. Initial emphasis in data gathering is given to Soviet-designed reactors in Russia, the former Soviet Union, and Eastern Europe. The implementation is performed under the Oracle database management system, and the World Wide Web is used to serve as the access path for remote users. An interface between the Oracle database and the Web server is established through a custom designed Web-Oracle gateway which is used mainly to perform queries on the stored data in the database tables

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2c, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Europe via the Regional Project RER/9/109 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Greece and Belarus are key partners in the European region.

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2d, June 2013

International Nuclear Information System (INIS)

2013-06-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Latin America via the Regional Project RLA/9/070 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Argentina and Brazil are key partners in the Latin-American region.

IAEA education and training programme in nuclear safety

International Nuclear Information System (INIS)

Bastos, J.L.F.; Lederman, L.

2003-01-01

This paper presents the IAEA education and training (E and T) programme in nuclear safety. A strategic planning for the programme implementation is described in terms of objectives, outputs and activities. A framework based on areas of competency and the level of depth of the training is presented as well as the main achievements to date. (author)

Management of a comprehensive radiation safety program in a major American University and affiliated academic medical center

International Nuclear Information System (INIS)

Yoshizumi, T.T.; Reiman, R.E.; Vylet, V.; Clapp, J.R.; Thomann, W.R.; Lyles, K.W.

2000-01-01

Duke University, which operates under eight radiation licenses issued by the State of North Carolina, consists of a leading medical center including extensive inpatient and outpatient facilities, a medical school, biomedical research labs, and an academic campus including two major accelerator facilities. The Nuclear Medicine and Radiation Oncology departments handle over 40,000 diagnostic and therapeutic procedures annually, including approximately 160 radioiodine therapeutic cases. In biomedical research labs, about 300 professors are authorized to use radioactive materials. Over 2,000 radiation workers are identified on campus. Over the past two years, we have transformed the existing radiation safety program into a more responsive and more accountable one. Simultaneously, the institutional 'culture' changed, and the Radiation Safety Division came to be viewed as a helpful ally by investigators. The purpose of this paper is to present our experiences that have made this transformation possible. Our initiatives included; (a) defining short-term and long-term goals; (b) establishing a definitive chain of authority; (c) obtaining an external review by a consultant Health Physicist; (d) improving existing radiation safety programs; (e) reorganizing the Radiation Safety Division, with creation of multidisciplinary professional staff positions; (f) implementing campus-wide radiation safety training, (g) increasing technician positions; (h) establishing monthly medical center radiation safety executive meeting. As a result progress made at the Divisional level includes; (a) culture change by recruiting professionals with academic credentials and recent college graduates; (b) implementing weekly staff meetings and monthly quality assurance meetings; (c) achieving academic prominence by publishing and presenting papers in national meetings; (d) senior staff achieving faculty appointments with academic departments; (e) senior staff participating in graduate student

Nuclear criticality safety: 3-day training course

International Nuclear Information System (INIS)

Schlesser, J.A.

1993-06-01

The open-quotes 3-Day Training Courseclose quotes is an intensive course in criticality safety consisting of lectures and laboratory sessions, including active student participation in actual critical experiments, a visit to a plutonium processing facility, and in-depth discussions on safety philosophy. The program is directed toward personnel who currently have criticality safety responsibilities in the capacity of supervisory staff and/or line management. This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. It should be noted that when chapters were extracted, an attempt was made to maintain footnotes and references as originally written. Photographs and illustrations are numbered sequentially

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2b, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Asia and the Pacific via the Regional project RAS/9/066 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Malaysia and Syrian Arabic Republic are key partners in the Asian and the Pacific region.

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2a, May 2013

International Nuclear Information System (INIS)

2013-05-01

The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Africa via the Regional project RAF/9/04 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. AFRA Regional Designated Centres, in Algeria, Ghana and Morocco, equivalent to the IAEA's Regional Training Centres (RTCs) present in all the other regions, are key partners in the African region.

The effect of safety training involving non-destructive testing among students at specialized vocational high schools

Energy Technology Data Exchange (ETDEWEB)

Lim Young Khi [Dept. of Radiological Science, Gachon University, Inchon (Korea, Republic of); Han, Eun Ok; Choi, Yoon Seok [Dept. of Education amd Research, Korea Academy of Nuclear Safety, Seoul (Korea, Republic of)

2017-06-15

By examining the safety issues involved in on-site training sessions conducted at specialized vocational high schools, and by analyzing the effects of non-destructive testing (NDT) safety training, this study aims to contribute to ensuring the general safety of high school students. Students who expressed an interest in participation were surveyed regarding current NDT training practices, as well as NDT safety training. A total of 361 students from 4 schools participated in this study; 37.7% (136 students) were from the Seoul metropolitan area and 62.3% (225 students) were from other areas. Of the respondents, 2.2% (8 students) reported having engaged in NDT. As a result of safety training, statistically significant improvements were observed in most areas, except for individuals with previous NDT experience. The areas of improvement included safety awareness, acquisition of knowledge, subjective knowledge levels, objective knowledge levels, and adjustments to existing personal attitudes. Even at absolutely necessary observation-only training sessions, it is crucial that sufficient safety training and additional safety measures be adequately provided.

The effect of safety training involving non-destructive testing among students at specialized vocational high schools

International Nuclear Information System (INIS)

Lim Young Khi; Han, Eun Ok; Choi, Yoon Seok

2017-01-01

By examining the safety issues involved in on-site training sessions conducted at specialized vocational high schools, and by analyzing the effects of non-destructive testing (NDT) safety training, this study aims to contribute to ensuring the general safety of high school students. Students who expressed an interest in participation were surveyed regarding current NDT training practices, as well as NDT safety training. A total of 361 students from 4 schools participated in this study; 37.7% (136 students) were from the Seoul metropolitan area and 62.3% (225 students) were from other areas. Of the respondents, 2.2% (8 students) reported having engaged in NDT. As a result of safety training, statistically significant improvements were observed in most areas, except for individuals with previous NDT experience. The areas of improvement included safety awareness, acquisition of knowledge, subjective knowledge levels, objective knowledge levels, and adjustments to existing personal attitudes. Even at absolutely necessary observation-only training sessions, it is crucial that sufficient safety training and additional safety measures be adequately provided

Developing Asthma-Friendly Childcare Centers with Online Training and Evaluation

OpenAIRE

Nowakowski, Alexandra Catherine Hayes; Carretta, Henry Joseph; Pineda, Nicole; Dudley, Julie Kurlfink; Forrest, Jamie R.

2016-01-01

In 2011, the Florida Asthma Coalition began offering its Asthma-Friendly Childcare Center training online. This course teaches childcare center employees the fundamentals of effective asthma management. It covers basic asthma physiology, ways to recognize asthma attacks, techniques to help children experiencing attacks, and strategies to create healthy environments for asthmatics. A team of health services researchers evaluated both years of the online training. Evaluators used a quasi-ex...

Safety net : train safely, profitably, and stay out of jail

Energy Technology Data Exchange (ETDEWEB)

Byfield, M.

2005-08-01

This article discussed the benefits of new Web-based training and development services provided by AMEC Training and Development Services. Various Alberta safety regulations were also reviewed, and it was noted that the upstream oil and gas sector have already begun building up strong safety programs. Companies are now increasingly using computer-based training for employees to improve workplace safety. Web-based courses ensure that the subject material is understood by students. In addition, Web-based materials can be economically delivered to field personnel. The learning process can be tracked and recorded in the event that misfortune should occur in the future. Various e-learning packages were evaluated, including Gemini's SWIFT e-learning package. However, the degree to which the Web can replace classroom instruction remains controversial. Typically, modules of a course focus initially on a foundation description of the plant or process, then progress to operating procedures and troubleshooting lessons. Moving diagrams can be programmed using Macro-media Flash, and can be used to portray moving mechanical parts and chemical changes that would normally not be visible to an operator even when standing beside the equipment. It was concluded that with hundreds of workers to train, often on a just-in-time basis, training services that include Web-based instruction are often the most cost-effective and efficient means of training staff. 5 figs.

Nuclear Regulatory Systems in Africa: Improving Safety and Security Culture Through Education and Training

International Nuclear Information System (INIS)

Kazadi Kabuya, F.

2016-01-01

The purpose of this paper is to address the important issue of supporting safety and security culture through an educational and training course program designed both for regulatory staff and licensees. Enhancing the safety and security of nuclear facilities may involve assessing the overall effectiveness of the organization's safety culture. Safety Culture implies steps such as identifying and targeting areas requiring attention, putting emphasis on organizational strengths and weaknesses, human attitudes and behaviours that may positively impact an organization's safety culture, resulting in improving workplace safety and developing and maintaining a high level of awareness within these facilities. Following the terrorist attacks of September 11, 2001, international efforts were made towards achieving such goals. This was realized through meetings, summits and training courses events, with main aim to enhance security at facilities whose activities, if attacked, could impact public health and safety. During regulatory oversight inspections undertaken on some licensee's premises, violations of security requirements were identified. They mostly involved inadequate management oversight of security, lack of a questioning attitude, complacency and mostly inadequate training in both security and safety issues. Using training and education approach as a support to raise awareness on safety and security issues in the framework of improving safety and security culture, a tentative training program in nuclear and radiological safety was started in 2002 with the main aim of vulgarizing the regulatory framework. Real first needs for a training course program were identified among radiographers and radiologists with established working experience but with limited knowledge in radiation safety. In the field of industrial uses of radiation the triggering events for introducing and implementing a training program were: the loss of a radioactive source in a mining

Availabilities in the June Safety Training sessions

CERN Multimedia

2010-01-01

A few places are still available on the safety courses mentioned below. Please consult the Safety training catalogue to obtain all the latest information and to register. Clearance for work with electrical equipment ("Habilitation électrique") for non-electricians (classroom-based course), 9 June, in French, 8 hours from 9.00 am to 5.30 pm (10 places available) Safety in Cryogenics level 1, 14 June, in English, 3 hours from, 9.00 am to 12 noon (5 places available) Lift-truck operation ("Conduite de chariots élévateurs"), 24-25 June, in French, 2 days from 8.00 am to 5.30 pm (3 places available).

Safety Training: places available in July - August 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, i...

Safety Training: places available in July - August 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, in...

Safety Training: places available in June

CERN Multimedia

GS Department

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. June 2012 (alphabetical order) Champs magnétiques 08-JUN-12, 09h30 – 12h00, en anglais Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 11-JUN-12 to 12-JUN-12, 08.00 – 17.00, in French (with possibility to have the handouts in English) Ergonomics - Applying ergonomic principles in the workplace 14-JUN-12, 09.00 – 12.00, in French First Aiders - Basic Course 06-JUN-12 to 07-JUN-12, 08.00 – 17.00, in French (total : 1.5 days) First Aiders - Refresher Course 07-JUN-12, 13.00 – 17.00, in French 12-JUN-12, 08.00 – 12.00, in English 12-JUN-12, 13.00 – 17.00, in English Habilitation ATEX niveau 2 (ATEX certification –  level 2) 07-JUN-12 to 08-JUN-12, 9.00 – 17.30, in French Habilitation &eacut...

Revamping occupational safety and health training: Integrating andragogical principles for the adult learner

Directory of Open Access Journals (Sweden)

Alex Albert

2013-09-01

Full Text Available Despite attempts to improve safety performance, the construction industry continues to account for a disproportionate rate of injuries. A large proportion of these injuries occur because workers are unable to recognize and respond to hazards in dynamic and unpredictable environments. Unrecognized hazards expose workers to unanticipated risks and can lead to catastrophic accidents. In order to enhance hazard recognition skills, employers often put new and experienced workers through formal hazard recognition training programs. Unfortunately, current training programs primarily rely on instructor-centric pedagogical approaches, which are insensitive to the adult learning process. In order to ensure effective adult learning, training programs must integrate learner-centric andragogical principles to improve engagement and retention in adult trainees. This paper aims to discuss training program elements that can potentially accelerate the adult learning process while improving safety knowledge retention. To this end, the researchers reviewed relevant literature on the cognitive processes of adult learning, essential components of effectual training programs and developed a reliable framework for the training and transfer of safety knowledge. A case example of successfully using the framework is also presented. The results of the study will provide safety trainers and construction professionals with valuable information on developing effective hazard recognition and receptor training programs, with the goal of improving construction safety performance.

NPP safety and personnel training. XII International conference. Abstracts. Volume 2

International Nuclear Information System (INIS)

2011-01-01

The XII International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7 2011. The problems of personnel training for nuclear industry are discussed. The innovation nuclear systems and fuel cycle are considered. The much attention has been given to NPP radiation safety and radioecology issues. The recent high-speed computation and simulation methods used in reactor technology are presented [ru

NPP safety and personnel training. XII International conference. Abstracts

International Nuclear Information System (INIS)

2011-01-01

The 12th International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7, 2011. The issues of nuclear technologies safety are considered.The problems of life-cycle management of nuclear facilities are discussed. The criteria of assessment of physical protection systems of nuclear facilities are presented [ru

Educating Immigrant Hispanic Foodservice Workers about Food Safety Using Visual-Based Training

Science.gov (United States)

Rajagopal, Lakshman

2013-01-01

Providing food safety training to a diverse workforce brings with it opportunities and challenges that must be addressed. The study reported here provides evidence for benefits of using visual-based tools for food safety training when educating immigrant, Hispanic foodservice workers with no or minimal English language skills. Using visual tools…

Five Years of a Computer Based New Training Program in Safety and Radiation Protection

International Nuclear Information System (INIS)

Ben-Shachar, B.; Tshuva, M.; Fitussi, I.; Ankri, D.

2004-01-01

One of the main goals of the Department of Human Resources Development is to give employees fundamental knowledge, refreshing know-how and increasing safety awareness. In this regard safety deals with risks in operating nuclear facilities, including radiation, industrial risks and fire. Israeli Work Supervision (informing and training employees, 1992) (1) and work safety regulations (industrial safety and health for ionization radiation employees) state the need for training by the employer at least once a year. The employer also must take means to verify that the employees actually understand what they were trained for

Pulsed power safety and technical training at Sandia National Laboratories

International Nuclear Information System (INIS)

Goldstein, S.A.; Zawadzkas, G.A.; Donovan, G.L.; Mikkelson, K.A.; Sharpe, A.W.; Johnston, R.R.

1987-01-01

The expansion of pulsed power applications research at Sandia National Labs requires increasing technician-level support from individuals trained in high voltage, short pulse technology. Large superpower generators need a broad-based training curriculum in all aspects of accelerator operation to satisfy recent Department of Energy (DOE) desires for formal certification of accelerator operators. This paper discusses the status of Sandia's safety and technical training program in pulsed power technology directed mainly towards high school graduate and technical school level students. Present safety training methodology requires that hazards for experimental facilities are identified first, a specific curriculum is then tailored to individuals' background experiences and hazards involved with their current assignments. In the technical training program, certification requirements are being established and a coursework program has been initiated in which subjects are organized into two sections. The first covers electrical principles and physical properties of pulsed power components. The second presents various support-type subsystems for accelerators

Nuclear Research Center Karlsruhe, Central Safety Department. Annual report 1992

International Nuclear Information System (INIS)

Koelzer, W.

1993-05-01

The Central Safety Department is responsible for handling all problems of radiation protection, safety and security of the institutes and departments of the Karlsruhe Nuclear Research Center, for waste water activity measurements and environmental monitoring of the whole area of the Center, and for research and development work mainly focusing on nuclear safety and radiation protection measures. The research and development work concentrates on the following aspects: Physical and chemical behavior of trace elements in the environment, biophysics of multicellular systems, behavior of tritium in the air/soil-plant system, improvement in radiation protection measurement and personnel dosimetry. This report gives details of the different duties, indicates the results of 1992 routine tasks and reports about results of investigations and developments of the working groups of the Department. The reader is referred to the English translation of Chapter 1 describing the duties and organization of the Central Safety Department. (orig.) [de

Systematic approach to training for competence building in radiation safety

International Nuclear Information System (INIS)

Asiamah, S.D.; Schandorf, C.; Darko, E.O.

2003-01-01

Competence building involves four main attributes, namely, knowledge, skills, operating experience and attitude to radiation safety. These multi-attribute requirements demand a systematic approach to education and training of regulatory staff, licensees/registrants and service providers to ensure commensurate competence in performance of responsibilities and duties to specified standards. In order to address issues of competencies required in radiation safety a national programme for qualification and certification has been initiated for regulatory staff, operators, radiation safety officers and qualified experts. Since the inception of this programme in 1993, 40 training events have been organized involving 423 individuals. This programme is at various levels of implementation due to financial and human resource constraints. A department for Human Resource Development and Research was established in 2000 to enhance and ensure the sustainability of the effectiveness of capacity building in radiation safety. (author)

Resistance training among young athletes: safety, efficacy and injury prevention effects.

Science.gov (United States)

Faigenbaum, A D; Myer, G D

2010-01-01

A literature review was employed to evaluate the current epidemiology of injury related to the safety and efficacy of youth resistance training. Several case study reports and retrospective questionnaires regarding resistance exercise and the competitive sports of weightlifting and powerlifting reveal that injuries have occurred in young lifters, although a majority can be classified as accidental. Lack of qualified instruction that underlies poor exercise technique and inappropriate training loads could explain, at least partly, some of the reported injuries. Current research indicates that resistance training can be a safe, effective and worthwhile activity for children and adolescents provided that qualified professionals supervise all training sessions and provide age-appropriate instruction on proper lifting procedures and safe training guidelines. Regular participation in a multifaceted resistance training programme that begins during the preseason and includes instruction on movement biomechanics may reduce the risk of sports-related injuries in young athletes. Strategies for enhancing the safety of youth resistance training are discussed.

Karlsruhe Nuclear Research Center, Central Safety Department. Annual report 1993

International Nuclear Information System (INIS)

Koelzer, W.

1994-04-01

The Central Safety Department is responsible for handling all tasks of radiation protection, safety and security of the institutes and departments of the Karlsruhe Nuclear Research Center, for waste water activity measurements and environmental monitoring of the whole area of the Center, and for research and development work mainly focusing on nuclear safety and radiation protection measures. The research and development work concentrates on the following aspects: behavior of trace elements in the environment and decontamination of soil, behavior of tritium in the air/soil-plant system, improvement in radiation protection measurements and personnel dosimetry. This report gives details of the different duties, indicates the results of 1993 routine tasks and reports about results of investigations and developments of the working groups of the Department. (orig.) [de

4 years of successful knowledge transfer - the nuclear technology training center of the TUeV Nord Group

International Nuclear Information System (INIS)

Willenbockel, I.; Tietze, U.

2007-01-01

In connection with the 2002 amendment to the German Atomic Energy Act, the topics of generational change and maintenance of competence grew in importance and necessitated new solution approaches. To this end, various activities were launched, with the aim of conducting conceptual analyses of these topics. Examples include the 'National Competence Network for Nuclear Technology' (Nationaler Kompetenzverbund fuer Kerntechnik), various networks established by colleges and universities, the 'Knowledge Management for the Maintenance and Transfer of Competence in Reactor Safety' (Wissensmanagement zum Kompetenzerhalt und -transfer in der Reaktorsicherheit) workshop held in 2001 in Garching near Munich (Germany) and the 'Ad-hoc Workgroup on the Maintenance of Competence' (Ad-hoc-Arbeitskreis Kompetenzerhalt) of the VdTUeV. The nuclear technology departments of the TUeV Nord Group were aware of te challenges associated with the generational change early on. By establishing the 'Nuclear Technology Training Center' (Ausbildungszentrum fuer Kerntechnik, AfK), the TUeV Nord Group intended to ensure the required knowledge transfer during the generational change as well as maintain the renowned high qualification as regards the subject of nuclear technology and thus continue to provide - in the sense of social responsibility - crucial contribution to the long-term safety of nuclear plants. Four years have passed since the training center held the first courses in the fall of 2002. Up to now, more than 350 participants have been trained in the courses conducted by the AfK. In the opinion of the TUeV Nord Group, the activities of the AfK have laid the foundation for a successful change of generations within the group's nuclear technology organizations. (orig.)

Effective Learning on the Web Using the Internet for Safety Training

International Nuclear Information System (INIS)

Bar-Noy, T.; Sugarman, H.

2004-01-01

A previous article, Nuclear Physics Education on the web, concentrated on identifying some of the many resources for information on nuclear physics education. This article will concentrate on utilizing these resources in order to create effective learning environments. As more and more learning and training moves from the traditional face to face classroom to the internet, it is becoming increasingly important to improve the quality of online courses. In the examples given here, we concentrate on the area of radiation safety. The reason for this is that government regulations mandate that every worker who comes in contact with radioactive (and other hazardous) materials must undergo safety training before he begins work and at regular intervals thereafter. Unfortunately this training often consists of boring lectures and reading materials, with no interactivity and little or no evaluation following the training. Because of the importance of safety training, it is imperative to improve the quality of this training by creating effective learning environments. One way to do this is to create online courses via the internet. Aside from the fact that use of the internet vastly expands the resources available to the student and instructor, giving a course via the web is much more efficient in terms of time and expense

Commercial Motor Vehicle Driving Safety Website

OpenAIRE

Tidwell, Scott; Trimble, Tammy; Blanco, Myra

2016-01-01

This report documents the CMV Driving Safety website (http://cmvdrivingsafety.org/), which was created by the National Surface Transportation Safety Center for Excellence (NSTSCE) as an outreach effort to assist commercial motor vehicle (CMV) fleets and drivers, driver trainers, CMV training schools, and insurance companies. The website contains 15 unique pages and provides six downloadable training modules on driver distraction, driver health, hours of service, driver drowsiness and fatigue,...

Non-technical skills training to enhance patient safety.

Science.gov (United States)

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

National Resource Center for Health and Safety in Child Care and Early Education

Science.gov (United States)

... National Resource Center for Health and Safety in Child Care and Early Education (NRC) at the University of Colorado College of ... National Resource Center for Health and Safety in Child Care and Early Education Email: info@NRCKids.org Please read our disclaimer ...

The effects of Crew Resource Management (CRM) training on flight attendants' safety attitudes.

Science.gov (United States)

Ford, Jane; Henderson, Robert; O'Hare, David

2014-02-01

A number of well-known incidents and accidents had led the aviation industry to introduce Crew Resource Management (CRM) training designed specifically for flight attendants, and joint (pilot and flight attendant) CRM training as a way to improve teamwork and communication. The development of these new CRM training programs during the 1990s highlighted the growing need for programs to be evaluated using research tools that had been validated for the flight attendant population. The FSAQ (Flight Safety Attitudes Questionnaire-Flight Attendants) was designed specifically to obtain safety attitude data from flight attendants working for an Asia-Pacific airline. Flight attendants volunteered to participate in a study before receiving CRM training (N=563) and again (N=526) after CRM training. Almost half (13) of the items from the 36-item FSAQ showed highly significant changes following CRM training. Years of experience, crew position, seniority, leadership roles, flight attendant crew size, and length of route flown were all predictive of safety attitudes. CRM training for flight attendants is a valuable tool for increasing positive teamwork behaviors between the flight attendant and pilot sub-groups. Joint training sessions, where flight attendants and pilots work together to find solutions to in-flight emergency scenarios, provide a particularly useful strategy in breaking down communication barriers between the two sub-groups. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Building a culture of safety through team training and engagement.

Science.gov (United States)

Thomas, Lily; Galla, Catherine

2013-05-01

Medical errors continue to occur despite multiple strategies devised for their prevention. Although many safety initiatives lead to improvement, they are often short lived and unsustainable. Our goal was to build a culture of patient safety within a structure that optimised teamwork and ongoing engagement of the healthcare team. Teamwork impacts the effectiveness of care, patient safety and clinical outcomes, and team training has been identified as a strategy for enhancing teamwork, reducing medical errors and building a culture of safety in healthcare. Therefore, we implemented Team Strategies and Tools to Enhance Performance and Patient Safety (TeamSTEPPS), an evidence-based framework which was used for team training to create transformational and/or incremental changes; facilitating transformation of organisational culture, or solving specific problems. To date, TeamSTEPPS (TS) has been implemented in 14 hospitals, two Long Term Care Facilities, and outpatient areas across the North Shore LIJ Health System. 32 150 members of the healthcare team have been trained. TeamSTEPPS was piloted at a community hospital within the framework of the health system's organisational care delivery model, the Collaborative Care Model to facilitate sustainment. AHRQ's Hospital Survey on Patient Safety Culture, (HSOPSC), was administered before and after implementation of TeamSTEPPS, comparing the perception of patient safety by the heathcare team. Pilot hospital results of HSOPSC show significant improvement from 2007 (pre-TeamSTEPPS) to 2010. System-wide results of HSOPSC show similar trends to those seen in the pilot hospital. Valuable lessons for organisational success from the pilot hospital enabled rapid spread of TeamSTEPPS across the rest of the health system.

Safety Training: places available in March

CERN Multimedia

HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. MARCH 2012 (alphabetical order, titles of courses in the original language) Echafaudages, réception et conformité (Scaffolding, reception and conformity): From 29-FEB-12 to 02-MAR-12, 09.00 – 17.30, in French (in Domarin, dept. 38) Laser Users : 09-MAR-12, 09.00 – 12.30, in English Self-Rescue Mask training : 08-MAR-12, 08.30 – 10.00, in French 08-MAR-12, 10.30 – 12.00, in English 13-MAR-12, 08.30 – 10.00, in French 13-MAR-12, 10.30 – 12.00, in English 20-MAR-12, 08.30 – 10.00, in French 20-MAR-12, 10.30 – 12.00, in English 22-MAR-12, 08.30 – 10.00, in French 22-MAR-12, 10.30 – 12.00, , in English 27-MAR-12, 08.30 – 10.00, in French 27-MAR-12, 10.30 – 12.00, in English Habilitation électrique pour Electriciens en b...

Multimedia for occupational safety and health training: a pilot study examining a multimedia learning theory.

Science.gov (United States)

Wallen, Erik S; Mulloy, Karen B

2006-10-01

Occupational diseases are a significant problem affecting public health. Safety training is an important method of preventing occupational illness. Training is increasingly being delivered by computer although theories of learning from computer-based multimedia have been tested almost entirely on college students. This study was designed to determine whether these theories might also be applied to safety training applications for working adults. Participants viewed either computer-based multimedia respirator use training with concurrent narration, narration prior to the animation, or unrelated safety training. Participants then took a five-item transfer test which measured their ability to use their knowledge in new and creative ways. Participants who viewed the computer-based multimedia trainings both did significantly better than the control group on the transfer test. The results of this pilot study suggest that design guidelines developed for younger learners may be effective for training workers in occupational safety and health although more investigation is needed.

[Clinical safety audits for primary care centers. A pilot study].

Science.gov (United States)

Ruiz Sánchez, Míriam; Borrell-Carrió, Francisco; Ortodó Parra, Cristina; Fernàndez I Danés, Neus; Fité Gallego, Anna

2013-01-01

To identify organizational processes, violations of rules, or professional performances that pose clinical levels of insecurity. Descriptive cross-sectional survey with customized externally-behavioral verification and comparison of sources, conducted from June 2008 to February 2010. Thirteen of the 53 primary care teams (PCT) of the Catalonian Health Institute (ICS Costa de Ponent, Barcelona). Employees of 13 PCT classified into: director, nurse director, customer care administrators, and general practitioners. Non-random selection, teaching (TC)/non-teaching, urban (UC)/rural and small/large (LC) health care centers (HCC). A total of 33 indicators were evaluated; 15 of procedures, 9 of attitude, 3 of training, and 6 of communication. Level of uncertainty: <50% positive answers for each indicator. no collaboration. A total of 55 professionals participated (84.6% UC, 46.2% LC and 76.9% TC). Rank distribution: 13 customer care administrators, 13 nurse directors, 13 HCC directors, and 16 general practitioners. Levels of insecurity emerged from the following areas: reception of new medical professionals, injections administration, nursing weekend home calls, urgent consultations to specialists, aggressive patients, critical incidents over the agenda of the doctors, communication barriers with patients about treatment plans, and with immigrants. Clinical safety is on the agenda of the health centers. Identified areas of uncertainty are easily approachable, and are considered in the future system of accreditation of the Catalonian Government. General practitioners are more critical than directors, and teaching health care centers, rural and small HCC had a better sense of security. Copyright © 2012 Elsevier España, S.L. All rights reserved.

A framework for the development of patient safety education and training guidelines.

Science.gov (United States)

Zikos, Dimitrios; Diomidous, Marianna; Mantas, John

2010-01-01

Patient Safety (PS) is a major concern that involves a wide range of roles in healthcare, including those who are directly and indirectly involved, and patients as well. In order to succeed into developing a safety culture among healthcare providers, carers and patients, there should be given great attention into building appropriate education and training tools, especially addressing those who plan patient safety activities. The framework described in this policy paper is based on the results of the European Network for Patient Safety (EUNetPaS) project and analyses the principles and elements of the guidance that should be provided to those who design and implement Patient Safety Education and training activities. The main principles that it should be based on and the core teaching objectives-expected outcomes are addressed. Once the main context and considerations are properly set, the guidance should define the general schema of the content that should be included in the Education and Training activities, as well as how these activities would be delivered. It is also important that the different roles of the recipients are clearly distinguished and linked to their role-specific methods, proper delivery platforms and success stories. Setting these principles into practice when planning and implementing interventions, primarily aims to enlighten and support those who are enrolled to design and implement Patient Safety education and training teaching activities. This is achieved by providing them with a framework to build upon, succeeding to build a collaborative, safety conscious and competent environment, in terms of PS. A guidelines web platform has been developed to support this process.

Developing Asthma-Friendly Childcare Centers with Online Training and Evaluation

Directory of Open Access Journals (Sweden)

Alexandra Catherine Hayes Nowakowski

2016-03-01

Full Text Available In 2011, the Florida Asthma Coalition began offering its Asthma-Friendly Childcare Center training online. This course teaches childcare center employees the fundamentals of effective asthma management. It covers basic asthma physiology, ways to recognize asthma attacks, techniques to help children experiencing attacks, and strategies to create healthy environments for asthmatics. A team of health services researchers evaluated both years of the online training. Evaluators used a quasi-experimental design with pretest, posttest, and follow-up assessment. Questions measured knowledge gain and retention, user satisfaction, and implementation of management strategies. Over 650 people from nearly all 67 Florida counties took AFCC training online between 2011 and 2013. Test scores improved by a minimum of 11 percentage points in all program years evaluated. Gains in both knowledge and confidence were substantial and highly significant across years. While individual trainees did forget some content on follow-up, they seemed to retain the specific messages most relevant for their own workplaces. Most trainees also planned to implement multiple management strategies recommended by the training.A large majority of participants rated the training as excellent on all quality metrics, including relevance of content and time efficiency of the online format. Nearly all respondents perceived the training as useful for both providing improved care and fulfilling licensure or certification requirements. Many participants also indicated that their centers would pursue formal certification as AFCCs via the program offered by FAC. The online AFCC course performed strongly in its first years, yielding both high participant satisfaction and substantial improvement in workplace asthma management activity. This training holds promise for introducing and improving multidimensional asthma management strategies at childcare facilities nationwide.

Safety Training: places available in the forthcoming sessions in May

CERN Multimedia

Safety Commission

2010-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. MAY 2010: Confined spaces – for supervisors, 4 May, in French, 1 day, 09:00 – 17:30 Laser safety, 5 May, in French, 4 hours, 13:30 – 17:30 Radiological Protection, 7 May, in English, 4 hours, 13:30 – 17:30 Secourisme - Cours de recyclage, 7 May, in French, 4 hours, 08:30 – 12:30 Secourisme - Cours de recyclage, 7 May, in French, 4 hours, 12:30 – 17:30 Cherry-picker driving (basic course), 10-11 May, in French, 2 days, 08:00 – 17:30 Habilitation électrique : Personnel électricien effectuant des opérations du domaine de tension BTA, 10-11 May, in English, 2 days, 09:00 – 17:30 Biocell Training, 11 May, in French, 1.5 hour, 08:30 – 10:00 Biocell Training, 11 May, in French, 1.5 hour, 10:30 – 12:00 Radiological Protection, 11 May, in English, ...

EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

Directory of Open Access Journals (Sweden)

Elvira Mikhailovna Rebko

2016-02-01

Full Text Available The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions of networking.Purpose – present the results of the joint development of a network of the basic educational program (BEP, to identify the stages of networking, to design a generalized scheme of development and implementation of a network of educational training program for master’s education in the field of life safety.Results generalized model of networking partner institutions to develop and implement the basic educational program master.Practical implications: the education process for Master of Education in the field of health and safety in Herzen State Pedagogical University and Sakhalin State University.

Cooperation in regional nuclear training

International Nuclear Information System (INIS)

Newstead, C.M.; Lee, D.S.; Spitalnik, J.

1985-01-01

This paper presents an overview of the nuclear training currently being undertaken in the countries of the co-authors, and considers the degree to which training problems are amenable to common solutions such as cooperative regional training programs. Different types of cooperation are discussed including the development of regional and international training centers, cooperative bilateral and multilateral training, and the proposed US International Nuclear Safety Training Academy. The paper provides suggestions of ways for enhancing regional cooperation

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

10CFR50.59 safety evaluation training and expert system development

International Nuclear Information System (INIS)

Kline, S.W.; Dickinson, D.B.

1988-01-01

10CFR50.59 permits utilities to make changes to and conduct tests or experiments on operating nuclear power plants without prior US Nuclear Regulatory Commission (NCR) approval unless the proposed change, test, or experiment (i.e, the proposed activity) involves a change to the plant technical specifications or an unreviewed safety question (USQ). To provide guidance to their engineers for making the determination of whether a proposed activity involves a USQ. Bechtel has developed a safety evaluation training program. This training program incorporates the guidance in and NRC comments to the November 1987 draft Nuclear Management and Resources Council safety evaluation guidance document, NRC statements contained in inspection reports and other documents, and the experience of senior Bechtel engineers. To further develop the question and concerns that need to be addressed in a safety evaluation in a systematic manner, Bechtel is incorporating the training program guidance and other information into an IBM PC-AT-based working model of an expert system using the NEXPERT expert system development tool. The development and use of this expert system working model are being undertaken to provide consistency and completeness to the thought process used and the output provided by Bechtel engineers when performing a safety evaluation

The Safety Assessment Education and Training Programme (SAET). Education and Training in the Area of Safety Assessment

International Nuclear Information System (INIS)

Mellinger-Deroy, M.

2014-01-01

• The SAET Programme provides a systematic approach for training regulatory, operational and technical support staff in the skills needed for informed decision-making and technical review of NPP safety case documentation. • The objective of the Programme is to support the IAEA Member States in developing the knowledge and skills necessary for making the right decisions in NPP design, licensing and operation. (author)

Evaluating Behavioral Skills Training with and without Simulated in Situ Training for Teaching Safety Skills to Children

Science.gov (United States)

Miltenberger, Raymond; Gross, Amy; Knudson, Peter; Bosch, Amanda; Jostad, Candice; Breitwieser, Carrie Brower

2009-01-01

This study compared the effectiveness of behavioral skills training (BST) to BST plus simulated in situ training (SIT) for teaching safety skills to children to prevent gun play. The results were evaluated in a posttest only control group design. Following the first assessment, participants in both training groups and the control group who did not…

Preventing Child Sexual Abuse: Body Safety Training for Young Children in Turkey.

Science.gov (United States)

Citak Tunc, Gulseren; Gorak, Gulay; Ozyazicioglu, Nurcan; Ak, Bedriye; Isil, Ozlem; Vural, Pinar

2018-06-01

The "Body Safety Training Program" is an education program aimed at ensuring children are informed about their body and acquire self-protection skills. In this study, a total of 83 preschoolers were divided into experimental and control groups; based on a power analysis, 40 children comprised the experimental group, while 43 children comprised the control group. The "Body Safety Training Programme" was translated into Turkish and content validity was determined regarding the language and cultural appropriateness. The "What If Situations Test" (WIST) was administered to both groups before and after the training. Mann-Whitney U Test, Kruskal-Wallis Variance Analysis, and the Wilcoxon Signed Ranks Test were used to compare between the groups and the Spearman correlation analysis was used to determine the strength of the relationship between the dependent and independent variable. The differences between the pretest and posttest scores for the subscales (appropriate recognition, inappropriate recognition, say, do, tell, and reporting skills), and the personal safety questionnaire (PSQ) score means for the children in the experimental group were found to be statistically significant (p Body Safety Training programme" is effective in increasing the child sexual abuse prevention and self-protection skills in Turkish young children.

Criticality Safety Information Resource Center Web portal: www.csirc.net

International Nuclear Information System (INIS)

Harmon, C.D. II; Jones, T.

2000-01-01

The Nuclear Criticality Safety Group (ESH-6) at Los Alamos National Laboratory (LANL) is in the process of collecting and archiving historical and technical information related to nuclear criticality safety from LANL and other facilities. In an ongoing effort, this information is being made available via the Criticality Safety Information Resource Center (CSIRC) web site, which is hosted and maintained by ESH-6 staff. Recently, the CSIRC Web site was recreated as a Web portal that provides the criticality safety community with much more than just archived data

Building Up an On-Line Plant Information System for the Emergency Response Center of the Hungarian Nuclear Safety Directorate

International Nuclear Information System (INIS)

Vegh, Janos; Major, Csaba; Horvath, Csaba; Hozer, Zoltan; Adorjan, Ferenc; Lux, Ivan; Horvath, Kristof

2002-01-01

The main design features, services, and human-machine interface characteristics are described of the CERTA VITA on-line plant information system developed and installed by KFKI AEKI at the Nuclear Safety Directorate (NSD) of the Hungarian Atomic Energy Authority (HAEA) in cooperation with experts from the NSD. The Center for Emergency Response, Training, and Analysis (CERTA) located at the headquarters of NSD, Budapest, Hungary, was established in 1997. The center supports the NSD installation, radiological monitoring, and advisory team in case of nuclear emergencies, with appropriate hardware and software for communication, diagnosis, prognosis, and prediction. The vital information transfer and analysis (VITA) system represents an important part of the CERTA, as it provides for the continuous remote inspection of the four VVER-440/V213 units of the Hungarian Paks nuclear power plant (NPP). The on-line information system maintains a continuous data link with the NPP through a managed leased line that connects CERTA to a gateway computer located at the Paks NPP. The present scope of the system is a result of a 4-yr development project: In addition to the basic safety parameter display functions, the VITA system now includes an on-line break parameter estimation module, an extensive training package based on simulated transients, and on-line data transfer capabilities to feed accident diagnosis/analysis codes

Safety Training: scheduled sessions in September and October 2011

CERN Multimedia

2011-01-01

The following training courses are scheduled in September – October. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Alphabetical order (original course titles are maintained) Conduite de chariots élévateurs 17-OCT-11 to 18-OCT-11, 8.00 – 17.30, in French * Ergonomics - Applying ergonomic principles in the workplace 15-SEP-11, 9.00 – 12.30, in French 15-SEP-11, 14.00 – 17.30, in English Habilitation électrique : Personnel électricien effectuant des opérations du domaine de tension BTA...

The Safety Training Centre is also used for recruitment

CERN Multimedia

Antonella Del Rosso

2014-01-01

The Safety Training Centre on the Prévessin site boasts not only a life-sized mock-up of the LHC accelerator but also a number of other simulators, such as those used for electrical work certification (“habilitation électrique"). What better place to test the technical competencies of candidates applying for a job in the CERN Fire Brigade?     Instructors put the technical competencies of candidates applying for positions in the CERN Fire Brigade to the test in the tunnel that houses the LHC mock-up.   On 4 and 5 November, the Fire and Rescue Service’s facilities were used for the first time by the selection committee for a staff position. This gave candidates the chance to show their abilities and physical fitness in practice. CERN’s Safety Training Centre, which was fitted with a mock-up of the LHC in 2013, is becoming more and more widely used: by the Fire Brigade for their professional training sessions, incl...

Environment, safety and health compliance assessment, Feed Materials Production Center, Fernald, Ohio

Energy Technology Data Exchange (ETDEWEB)

1989-09-01

The Secretary of Energy established independent Tiger Teams to conduct environment, safety, and health (ES H) compliance assessments at US Department of Energy (DOE) facilities. This report presents the assessment of the Feed Materials Production Center (FMPC) at Fernald, Ohio. The purpose of the assessment at FMPC is to provide the Secretary with information regarding current ES H compliance status, specific ES H noncompliance items, evaluation of the adequacy of the ES H organizations and resources (DOE and contractor), and root causes for noncompliance items. Areas reviewed included performance under Federal, state, and local agreements and permits; compliance with Federal, state and DOE orders and requirements; adequacy of operations and other site activities, such as training, procedures, document control, quality assurance, and emergency preparedness; and management and staff, including resources, planning, and interactions with outside agencies.

Participatory/problem-based methods and techniques for training in health and safety.

Science.gov (United States)

Rosskam, E

2001-01-01

More knowledgeable and trained people are needed in the area of occupational health, safety, and environment (OSHE) if work-related fatalities, accidents, and diseases are to be reduced. Established systems have been largely ineffective, with few employers taking voluntary measures to protect workers and the environment and too few labor inspectors available. Training techniques using participatory methods and a worker empowerment philosophy have proven value. There is demonstrated need for the use of education for action, promoting the involvement of workers in all levels of decision-making and problem-solving in the workplace. OSH risks particular to women s jobs are virtually unstudied and not addressed at policy levels in most countries. Trade unions and health and safety professionals need to demystify technical areas, empower workers, and encourage unions to dedicate special activities around women s jobs. Trained women are excellent motivators and transmitters of safety culture. Particular emphasis is given to train-the-trainer approaches.

Supervisor's experiments on radiation safety trainings in school of engineering

International Nuclear Information System (INIS)

Nomura, Kiyoshi

2005-01-01

Radiation safety training courses in School of Engineering, The University of Tokyo, were introduced. The number of radiation workers and the usage of radiation and radioisotopes have been surveyed for past 14 years. The number of radiation workers in School of Engineering has increased due to the treatment of X-ray analysis of materials, recently. It is important for workers to understand the present situation of School of Engineering before the treatment of radiation and radioisotopes. What the supervisor should tell to radiation workers were presented herewith. The basic questionnaires after the lecture are effective for radiation safety trainings. (author)

NDE training activities at the EPRI NDE Center

International Nuclear Information System (INIS)

Pherigo, G.L.

1988-01-01

The three principal categories of training activity at the EPRI NDE Center are in-service inspection (ISI) training, technical skills training, and human resource development. The ISI training category, which addresses recently developed NDE technologies that are ready for field application, is divided into two areas. One area provides ongoing training and qualification service to boiling water reactor (BWR) utilities in accordance with the Coordination Plan for NRC/EPRI/BWROG Training and Qualification Activities of NDE Personnel. This plan specifically addresses the detection and sizing of intergranular stress corrosion cracking (IGSCC). The second area includes training activities for other recently developed NDE technologies. Courses in this area include weld overlay examination and advanced eddy current data analysis. The technical skills training is developed and offered to support the basic NDE technology needs of the utilities, with emphasis on utility applications. These programs are provided in direct response to generic or specific needs identified by the utility NDE community. The human resource development activities are focused on long-term utility needs through awareness programs for high schools, technical schools, and universities. These training programs are described

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

Science.gov (United States)

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

78 FR 979 - Petition for Positive Train Control Safety Plan Approval and System Certification of the...

Science.gov (United States)

2013-01-07

...] Petition for Positive Train Control Safety Plan Approval and System Certification of the Electronic Train... the Federal Railroad Administration (FRA) for Positive Train Control (PTC) Safety Plan (PTCSP) approval and system certification of the Electronic Train Management System (ETMS) as required by 49 U.S.C...

Instructional games and activities for criticality safety training

International Nuclear Information System (INIS)

Bullard, B.; McBride, J.

1993-01-01

During the past several years, the Training and Management Systems Division (TMSD) staff of Oak Ridge Institute for Science and Education (ORISE) has designed and developed nuclear criticality safety (NCS) training programs that focus on high trainee involvement through the use of instructional games and activities. This paper discusses the instructional game, initial considerations for developing games, advantages and limitations of games, and how games may be used in developing and implementing NCS training. It also provides examples of the various instructional games and activities used in separate courses designed for Martin Marietta Energy Systems (MMES's) supervisors and U.S. Nuclear Regulatory Commission (NRC) fuel facility inspectors

Westinghouse Nuclear Core Design Training Center - a design simulator

International Nuclear Information System (INIS)

Altomare, S.; Pritchett, J.; Altman, D.

1992-01-01

The emergence of more powerful computing technology enables nuclear design calculations to be done on workstations. This shift to workstation usage has already had a profound effect in the training area. In 1991, the Westinghouse Electric Corporation's Commercial Nuclear Fuel Division (CNFD) developed and implemented a Nuclear Core Design Training Center (CDTC), a new concept in on-the-job training. The CDTC provides controlled on-the-job training in a structured classroom environment. It alllows one trainer, with the use of a specially prepared training facility, to provide full-scope, hands-on training to many trainees at one time. Also, the CDTC system reduces the overall cycle time required to complete the total training experience while also providing the flexibility of individual training in selected modules of interest. This paper provides descriptions of the CDTC and the respective experience gained in the application of this new concept

Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique - French version only

CERN Multimedia

Laetitia Laddada

2004-01-01

If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Formation en SECURITE SAFETY Training Laetitia Laddada 73811 - 79236 safety.training@cern.ch Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 8 juillet 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Clemente Pilly et Ribordy Marion de « PM postures &ra...

77 FR 6411 - Training, Qualification, and Oversight for Safety-Related Railroad Employees

Science.gov (United States)

2012-02-07

... Oversight for Safety-Related Railroad Employees AGENCY: Federal Railroad Administration (FRA), Department of... establishing minimum training standards for each category and subcategory of safety-related railroad employee... or contractor that employs one or more safety-related railroad employee to develop and submit a...

Evaluation of aviation-based safety team training in a hospital in The Netherlands.

Science.gov (United States)

De Korne, Dirk F; Van Wijngaarden, Jeroen D H; Van Dyck, Cathy; Hiddema, U Francis; Klazinga, Niek S

2014-01-01

The purpose of this paper is to evaluate the implementation of a broad-scale team resource management (TRM) program on safety culture in a Dutch eye hospital, detailing the program's content and procedures. Aviation-based TRM training is recognized as a useful approach to increase patient safety, but little is known about how it affects safety culture. Pre- and post-assessments of the hospitals' safety culture was based on interviews with ophthalmologists, anesthesiologists, residents, nurses, and support staff. Interim observations were made at training sessions and in daily hospital practice. The program consisted of safety audits of processes and (team) activities, interactive classroom training sessions by aviation experts, a flight simulator session, and video recording of team activities with subsequent feedback. Medical professionals considered aviation experts inspiring role models and respected their non-hierarchical external perspective and focus on medical-technical issues. The post-assessment showed that ophthalmologists and other hospital staff had become increasingly aware of safety issues. The multidisciplinary approach promoted social (team) orientation that replaced the former functionally-oriented culture. The number of reported near-incidents greatly increased; the number of wrong-side surgeries stabilized to a minimum after an initial substantial reduction. The study was observational and the hospital's variety of efforts to improve safety culture prevented us from establishing a causal relation between improvement and any one specific intervention. Aviation-based TRM training can be a useful to stimulate safety culture in hospitals. Safety and quality improvements are not single treatment interventions but complex socio-technical interventions. A multidisciplinary system approach and focus on "team" instead of "profession" seems both necessary and difficult in hospital care.

Preparedness of fire safety in underground train station: Comparison between train operators in Malaysia with other operators from the developed countries

Science.gov (United States)

Tajedi, Noor Aqilah A.; Sukor, Nur Sabahiah A.; Ismail, Mohd Ashraf M.; Shamsudin, Shahrul A.

2017-10-01

The purpose of this paper is to compare the fire evacuation plan and preparation at the underground train stations in the different countries. The methodology for this study was using the extended questionnaire survey to investigate the Rapid Rail Sdn Bhd, Malaysia's fire safety plan and preparation at the underground train stations. There were four sections in the questionnaire which included (i) background of the respondents, (ii) the details on the train stations, safety instruction and fire evacuation exercises (iii) technical systems, installation and equipment at the underground stations and (iv) procedures and technical changes related to fire safety that had been applied by the operators. Previously, the respondents from the different train operator services in the developed countries had completed the questionnaires. This paper extends the response from the Rapid Rail Sdn Bhd to compare the emergency procedures and preparation for fire event with the developed countries. As a result, this study found that the equipment and facilities that provided at the underground train stations that operated by Rapid Rail are relevant for fire safety procedures and needs. The main advantage for Rapid Rail is the underground stations were designed with two or more entrances/exits that may perform better evacuation compare to one main entrance/exit train stations in the other developed countries.

Safety and health education and training of contract workers in nuclear power plants

International Nuclear Information System (INIS)

Matsumoto, Akikuni; Hara, Hisayuki; Nawata, Kazumitsu

2008-01-01

Nuclear power plants have used many contract workers. Their safety and health conditions are very important in Japan. Several amendments, which deregulate temporary personnel service and employment agency markets, have been done in recent years. The number of contract and temporary help agency workers have been rapidly increasing especially since the 1990s. As a result, ensuring the level of safety and health education and training of workers becomes a serious problem. This paper examines the possibility that the level of safety training of the contract workers is less than that of the direct-hire employees in nuclear power plants. We show that (1) the use of contract workers could be less efficient for ensuring the level of safety training, and (2) nuclear power plants still use contract workers in some situations in spite of the loss of efficiency. We also study legislations and past cases relating to nuclear power generation. We find that there are some structural problems that might make the contract workers less trained. (author)

77 FR 20369 - Applications for New Awards; Centers for Independent Living-Training and Technical Assistance

Science.gov (United States)

2012-04-04

... Education ACTION: Notice. Overview Information Centers for Independent Living--Training and Technical.... Funding Opportunity Description Purpose of Program The purpose of the Training and Technical Assistance grant under the Centers for Independent Living program is to provide training and technical assistance...

49 CFR 238.105 - Train electronic hardware and software safety.

Science.gov (United States)

2010-10-01

... and software system safety as part of the pre-revenue service testing of the equipment. (d)(1... safely by initiating a full service brake application in the event of a hardware or software failure that... 49 Transportation 4 2010-10-01 2010-10-01 false Train electronic hardware and software safety. 238...

Implementing and measuring safety goals and safety culture. 4. Utility's Activities for Better Safety Culture After the JCO Accident

International Nuclear Information System (INIS)

Omoto, Akira

2001-01-01

The criticality accident at the JCO plant prompted the Government to enact a law for nuclear emergency preparedness. The nuclear industry established NSnet to facilitate opportunities for peer review among its members. This paper describes the activities by NSnet and TEPCO's Kashiwazaki-Kariwa nuclear power station (NPS) for a better safety culture. Created as a voluntary organization by the nuclear industry in 1999, NSnet has 35 members and is assisted by CRIEPI and NUPEC for its activities relevant to human factors. Given the fact that nuclear facility operators not belonging to WANO had no institutional system available for exchange of experiences and good practices for better safety among themselves, NSnet's activities focus on peer review by member organizations and onsite seminars. Starting April 2000 with visits to three fuel fabricators, NSnet intends to have 23 peer-review visits in 2 yr (Ref. 1). The six-member review team stays on-site for 4 days, during which time they review-using guidelines available from WANO and IAEA-OSART-six areas: organization/management, emergency preparedness, education/training, operation/ maintenance, protection against occupational radiation exposure, and prevention of accidents. A series of on-site seminars is held at members' nuclear facilities, to which NSnet dispatches experts for lectures. NSnet plans to hold such seminars twice per month. Other activities include information-sharing through a newsletter, a Web site (www. nsnet.gr.jp), and others. Although considerable differences exist in the design and the practices in operation/maintenance between power reactors and JCO, utilities can extract lessons from the accident that will be worth consideration for their own facilities in the areas of safety culture, education and training, and interface between design and operation. This thinking prompted the Nuclear Safety Promotion Center at Kashiwazaki-Kariwa NPS, to which the author belonged at that time, to launch the

75 FR 13521 - Centers for Independent Living Program-Training and Technical Assistance

Science.gov (United States)

2010-03-22

... DEPARTMENT OF EDUCATION Centers for Independent Living Program--Training and Technical Assistance... for Independent Living Program--Training and Technical Assistance (CIL-TA program). The Assistant... appropriated for the CIL program to provide training and technical assistance to CILs, agencies eligible to...

Health and Safety Legislation in Australia: Complexity for Training Remains

Science.gov (United States)

Bahn, Susanne; Barratt-Pugh, Llandis

2014-01-01

This paper presents the findings from a study that examined the impact of the National Occupational Health and Safety Strategy 2002-2012 and the harmonisation of the Work Health and Safety Act 2011 on Australian training design, delivery and outcomes. There has been a comparative reduction in work related injuries, fatalities and disease, and…

Comparison of Direct Instruction and Problem Centered Instruction for Army Institutional Training

Science.gov (United States)

2013-04-01

module were assessed. The hypotheses were that (1) both DI and PCI students’ performance overall would benefit from the training, (2) DI students...collaborative, problem-centered instruction,” these results indicate that, in at least some cases, there may be no benefit of problem-centered...Belanich, J. (2006). Videogame -based training success: The impact of student characteristics - Year 2 (Technical Report 1188). Arlington, VA: U. S

Republished: Building a culture of safety through team training and engagement.

Science.gov (United States)

Thomas, Lily; Galla, Catherine

2013-07-01

Medical errors continue to occur despite multiple strategies devised for their prevention. Although many safety initiatives lead to improvement, they are often short lived and unsustainable. Our goal was to build a culture of patient safety within a structure that optimised teamwork and ongoing engagement of the healthcare team. Teamwork impacts the effectiveness of care, patient safety and clinical outcomes, and team training has been identified as a strategy for enhancing teamwork, reducing medical errors and building a culture of safety in healthcare. Therefore, we implemented Team Strategies and Tools to Enhance Performance and Patient Safety (TeamSTEPPS), an evidence-based framework which was used for team training to create transformational and/or incremental changes; facilitating transformation of organisational culture, or solving specific problems. To date, TeamSTEPPS (TS) has been implemented in 14 hospitals, two Long Term Care Facilities, and outpatient areas across the North Shore LIJ Health System. 32 150 members of the healthcare team have been trained. TeamSTEPPS was piloted at a community hospital within the framework of the health system's organisational care delivery model, the Collaborative Care Model to facilitate sustainment. AHRQ's Hospital Survey on Patient Safety Culture, (HSOPSC), was administered before and after implementation of TeamSTEPPS, comparing the perception of patient safety by the heathcare team. Pilot hospital results of HSOPSC show significant improvement from 2007 (pre-TeamSTEPPS) to 2010. System-wide results of HSOPSC show similar trends to those seen in the pilot hospital. Valuable lessons for organisational success from the pilot hospital enabled rapid spread of TeamSTEPPS across the rest of the health system.

Training Children in Pedestrian Safety: Distinguishing Gains in Knowledge from Gains in Safe Behavior

OpenAIRE

Schwebel, David C.; McClure, Leslie A.

2014-01-01

Pedestrian injuries contribute greatly to child morbidity and mortality. Recent evidence suggests that training within virtual pedestrian environments may improve children’s street crossing skills, but may not convey knowledge about safety in street environments. We hypothesized that (a) children will gain pedestrian safety knowledge via videos/software/internet websites, but not when trained by virtual pedestrian environment or other strategies; (b) pedestrian safety knowledge will be associ...

Training Activities to Maintain Competences in Nuclear Safety and Security: A Case Study of the Belgian Nuclear Research Centre

International Nuclear Information System (INIS)

Kesteloot, N.; Clarijs, T.; Coeck, M.; Vermeersch, F.

2016-01-01

Full text: The Belgian Nuclear Research Centre, SCK•CEN, is one of the largest research centers in Belgium. More than 700 employees advance research into nuclear energy and ionizing radiation for civilian use, and develop nuclear technologies for socially valuable purposes. Next to independent fundamental and applied research SCK-CEN provides advice, training, services and products. This paper describes the general approach towards the continuous professional development of all SCK-CEN personnel. The objective of these training activities is to maintain and increase the required competences, in order to optimize the output and the wellbeing on the work floor. Given the nature of the SCK-CEN activities, special attention is given to themes like radiation protection, security and industrial safety. A combination of classical face-to-face training, e-learning and on-the-job training is offered during the onboarding and further career path of an SCK-CEN employee. (author

Quality and safety training in primary care: making an impact.

Science.gov (United States)

Byrne, John M; Hall, Susan; Baz, Sam; Kessler, Todd; Roman, Maher; Patuszynski, Mark; Thakkar, Kruti; Kashner, T Michael

2012-12-01

Preparing residents for future practice, knowledge, and skills in quality improvement and safety (QI/S) is a requisite element of graduate medical education. Despite many challenges, residency programs must consider new curricular innovations to meet the requirements. We report the effectiveness of a primary care QI/S curriculum and the role of the chief resident in quality and patient safety in facilitating it. Through the Veterans Administration Graduate Medical Education Enhancement Program, we added a position for a chief resident in quality and patient safety, and 4 full-time equivalent internal medicine residents, to develop the Primary Care Interprofessional Patient-Centered Quality Care Training Curriculum. The curriculum includes a first-or second-year, 1-month block rotation that serves as a foundational experience in QI/S and interprofessional care. The responsibilities of the chief resident in quality and patient safety included organizing and teaching the QI/S curriculum and mentoring resident projects. Evaluation included prerotation and postrotation surveys of self-assessed QI/S knowledge, abilities, skills, beliefs, and commitment (KASBC); an end-of-the-year KASBC; prerotation and postrotation knowledge test; and postrotation and faculty surveys. Comparisons of prerotation and postrotation KASBC indicated significant self-assessed improvements in 4 of 5 KASBC domains: knowledge (P < .001), ability (P < .001), skills (P < .001), and belief (P < .03), which were sustained on the end-of-the-year survey. The knowledge test demonstrated increased QI/S knowledge (P  =  .002). Results of the postrotation survey indicate strong satisfaction with the curriculum, with 76% (25 of 33) and 70% (23 of 33) of the residents rating the quality and safety curricula as always or usually educational. Most faculty members acknowledged that the chief resident in quality and patient safety enhanced both faculty and resident QI/S interest and

Education and Training of Safety Regulation for Nuclear Safety Infrastructure: Its Necessity and Unique Features

International Nuclear Information System (INIS)

Choi, Young Sung; Choi, Young Joon; Lee, Jae Cheon

2009-01-01

Faced with global warming and electricity demands, countries over the world recognize the comparative advantages of nuclear energy. It is estimated that about 300 nuclear power plants (NPPs) expect to be constructed until 2030 worldwide. In addition, according to the IAEA, approximately 20 new countries might have their first NPP in operation by 2030 in the high projection compared with bout 5 new countries in the low projection. When introducing nuclear power, the implementation of an appropriate infrastructure to address all of the relevant issues is a central concern of international community. In particular, nuclear power program requires, at an earlier stage than when construction starts, the development of a legal and regulatory framework and training of regulators and safety experts whose combined knowledge adequately covers all areas of nuclear safety and regulation applied at a NPP construction and operation. As an essential component of such human resource development, special attention was paid to the provision of education and training to regulators of which countries plan to introduce NPPs. In term of education theory, safety regulation has some unique features in learning and teaching, which are different from those of nuclear engineering or development. This paper overviews nuclear safety infrastructure, explores the roles of exporting countries, and presents features and components in education of nuclear safety regulation

[Does annual simulation training influence the safety climate of a university hospital? : Prospective 5‑year investigation using dimensions of the safety attitude questionnaire].

Science.gov (United States)

St Pierre, M; Gall, C; Breuer, G; Schüttler, J

2017-12-01

Simulation-based training with a focus on non-technical skills can have a positive influence on safety relevant attitudes of participants. If an organization succeeds in training sufficient staff, it may experience a positive change in the safety climate. As the effects of a single training are of a transient nature, annual training sessions may lead to an incremental improvement of safety relevant attitudes of employees over time. In spring 2012 the Department of Anesthesia at the University Hospital of Erlangen established an annual simulation-based training for staff members (e.g. consultants, trainee anesthetists and nurse anesthetists). The study aimed to test whether an annual simulation-based training would result in an incremental longitudinal improvement in attitudes towards teamwork, safety and stress recognition. A survey comprising three domains (teamwork climate, safety climate and stress recognition) of the safety attitudes questionnaire (SAQ) and items addressing briefing and speaking up was distributed to all participants in an annual in-house simulation training. Participants filled out the questionnaire in the morning of each training day. The attitudes were measured before the first training series in 2012, 6 months after the first training and then every year (2013-2016). Participants generated a personalized identification code which allowed individuals to be anonymously tracked over time. Results of the 5‑point Likert scale were transformed to a 100-point scale. Results were calculated at the group level and at the individual level. Univariable linear regression was used to calculate mean changes per year. Over a period of 5 years (2012-2016) a total of 255 individuals completed the questionnaire. Each year, 14-20% of all nurse anesthetists and 81-90% of all anesthetists participated in the simulation-based training. As a result of annual staff turnover 16-24% of participants were new staff members. A personalized code allowed the

Editorial: Advances in healthcare provider and patient training to improve the quality and safety of patient care

Directory of Open Access Journals (Sweden)

Elizabeth M. Borycki

2015-09-01

Full Text Available This special issue of the Knowledge Management & E-Learning: An International Journal is dedicated to describing “Advances in Healthcare Provider and Patient Training to Improve the Quality and Safety of Patient Care.” Patient safety is an important and fundamental requirement of ensuring the quality of patient care. Training and education has been identified as a key to improving healthcare provider patient safety competencies especially when working with new technologies such as electronic health records and mobile health applications. Such technologies can be harnessed to improve patient safety; however, if not used properly they can negatively impact on patient safety. In this issue we focus on advances in training that can improve patient safety and the optimal use of new technologies in healthcare. For example, use of clinical simulations and online computer based training can be employed both to facilitate learning about new clinical discoveries as well as to integrate technology into day to day healthcare practices. In this issue we are publishing papers that describe advances in healthcare provider and patient training to improve patient safety as it relates to the use of educational technologies, health information technology and on-line health resources. In addition, in the special issue we describe new approaches to training and patient safety including, online communities, clinical simulations, on-the-job training, computer based training and health information systems that educate about and support safer patient care in real-time (i.e. when health professionals are providing care to patients. These educational and technological initiatives can be aimed at health professionals (i.e. students and those who are currently working in the field. The outcomes of this work are significant as they lead to safer care for patients and their family members. The issue has both theoretical and applied papers that describe advances in patient

An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes.

Science.gov (United States)

Haas, Emily J; Hoebbel, Cassandra L; Rost, Kristen A

2014-09-01

Satisfactory completion of mine safety training is a prerequisite for being hired and for continued employment in the coal industry. Although training includes content to develop skills in a variety of mineworker competencies, research and recommendations continue to specify that specific limitations in the self-escape portion of training still exist and that mineworkers need to be better prepared to respond to emergencies that could occur in their mine. Ecological models are often used to inform the development of health promotion programs but have not been widely applied to occupational health and safety training programs. Nine mine safety trainers participated in in-depth semi-structured interviews. A theoretical analysis of the interviews was completed via an ecological lens. Each level of the social ecological model was used to examine factors that could be addressed both during and after mine safety training. The analysis suggests that problems surrounding communication and collaboration, leadership development, and responsibility and accountability at different levels within the mining industry contribute to deficiencies in mineworkers' mastery and maintenance of skills. This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels-individual, interpersonal, organizational, and community-to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

Automated system for the management of the radiological safety in a radiopharmaceutical and labelled compounds production center

International Nuclear Information System (INIS)

Amador B, Z.H.; Alvarez Builla de Sologuren, E.

2006-01-01

The establishment in the Center of Isotopes of Cuba of a managerial quality system in matter of radiological safety Y the accumulated operational experience, its constitute the foundations for the development of a system of management of the radiological safety organically structured, with the application of evaluative techniques of it management Y it integration in an automated system. The Visual Basic 5 platform for the programming of the 'SASR' system is used. The functions of each one of the 11 modules that integrate it are described. With this it can be carried out the registration of the data of the training Y the personnel's authorization, the checkup of the radioactive inventory of the installation, the annual upgrade of the registrations of the individual doses of those workers, the analysis of the state of the available equipment for magnitude to control, the radiological situation of the work positions, the public exposure by the gassy discharges, the experiences of the radiological events, the annual consolidation of the costs of the safety Y the evaluation of indicators Y of tendencies. A computer tool that facilitates the effective management of the radiological safety in a radioactive installation is obtained. (Author)

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 3, May 2014

International Nuclear Information System (INIS)

2014-05-01

Building competence through education and training in radiation protection, radioactive waste safety, and safety in transport of radioactive material is fundamental to the establishment of a comprehensive and sustainable national infrastructure for radiation safety, which in turn is essential for the beneficial uses of radiation while ensuring appropriate protection of workers, patients, the public and the environment. IAEA’s Division of Radiation, Transport and Waste Safety provides direct assistance to Member States via a range of tools and mechanisms, such as by organizing educational and training events, developing standardized syllabi with supporting material and documents, and by fostering methodologies to build sustainable competence and enhance effectiveness in the provision of training. The main objective is to support Member States in the application of the IAEA Safety Standards. Seminars and additional activities are also promoted to broaden knowledge on relevant areas for an effective application of the standards

Occupational Safety and Health Professionals' Training in Italy: Qualitative Evaluation Using T-LAB

Science.gov (United States)

Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara

2013-01-01

Purpose: The purpose of this paper is to describe the evaluation of a training course on chemicals for occupational safety and health (OSH) professionals. The study aims were to assess the effectiveness of the course; to find out what type of training met these workers' needs best, as their role is vital in the management of safety at work; and to…

Experience report: a training center for health response

International Nuclear Information System (INIS)

Maurmo, Alexandre M.; Leite, Teresa C.S.B.

2009-01-01

The Professor Nelson Valverde Training Center was created within FEAM (The ELETRONUCLEAR Medical Assistance Foundation) with the objective of capacitating Radio Nuclear Accident Responders for the Health Area in the Almirante Alvaro Alberto Nuclear Central (Angra dos Reis - RJ - Brazil). The first step was structuring the contents for this training using IAEA's Manuals as base (EPR Medical - 2005, EPR First Responders - 2006 and TMT - Handbook - 2009) and data from REAC/TS. The second step was to capacitate instructors. The third step was the integration with the Company's Radiological Protection Division, giving radiological assessment. Finally, the development of training applications, ending with Drills, Tests and Assessment, gathering data and suggestions, objectifying the constant improvement. Training Programs with pre and post evaluations have been started. Since 2004 training internal courses were ministered for 125 professionals with annual re-training and were ministered to 130 professionals from several external institutions. During the same period training courses were ministered to 140 trainees from the Radiological Protection Division of The Nuclear Power Plant of Angra dos Reis, as First Lay Responders, objectifying the improvement of the quality of the emergency response. (author)

Safety training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 8 juillet 2004. Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures » . L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.chFORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

Aube storage center. Information report on nuclear safety and radiation protection 2015

International Nuclear Information System (INIS)

2016-01-01

The National Radioactive Waste Management Agency (Andra), was established by the December 1991 Waste Act as a public body in charge of the long-term management of all radioactive waste, under the supervision of the Ministry of Ecology, Energy, Sustainable Development and the Sea (formerly the Ministry of Industry and the Ministry of Environment), and the Ministry of Research. The Andra operates two storage centers in the Aube region (France): the center for short-lived low- and intermediate-level wastes, and the center for very-low-level radioactive wastes. This document is the 2015 activity report of the center for short-lived low- and intermediate-level wastes. It presents a review of the activities of the center: presentation of the installations, safety and radiation protection, security, events or incidents, environmental monitoring and effluents, wastes management, public information, recommendations of the Health and safety Committee (CHSCT)

Aube storage center. Information report on nuclear safety and radiation protection 2016

International Nuclear Information System (INIS)

2017-01-01

The National Radioactive Waste Management Agency (Andra), was established by the December 1991 Waste Act as a public body in charge of the long-term management of all radioactive waste, under the supervision of the Ministry of Ecology, Energy, Sustainable Development and the Sea (formerly the Ministry of Industry and the Ministry of Environment), and the Ministry of Research. The Andra operates two storage centers in the Aube region (France): the center for short-lived low- and intermediate-level wastes, and the center for very-low-level radioactive wastes. This document is the 2016 activity report of the center for short-lived low- and intermediate-level wastes. It presents a review of the activities of the center: presentation of the installations, safety and radiation protection, security, events or incidents, environmental monitoring and effluents, wastes management, public information, recommendations of the Health and safety Committee (CHSCT)

A Model Train-The-Trainer Program for HACCP-Based Food Safety Training in the Retail/Food Service Industry: An Evaluation.

Science.gov (United States)

Martin, Kenneth E.; Knabel, Steve; Mendenhall, Von

1999-01-01

A survey showed states are adopting higher training and certification requirements for food-service workers. A train-the-trainer model was developed to prepare extension agents, health officers, and food-service managers to train others in food-safety procedures. (SK)

Safety Training: places available in October 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   October 2013 (alphabetical order) Habilitation ATEX niveau 1 (ATEX habilitation level 1) 08-OCT-13, 9.00 – 17.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving cherry-pickers) 21-OCT-13 to 22-OCT-13, 08.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 03-OCT-13, 9.00 – 12.00, in English Être TSO au CERN (Being a TSO at CERN) 29-OCT-13 to 31-OCT-13, 9.00 – 17.30, in French Self-Rescue Mask Training 01-OCT-13, 10.30 – 12.30, in French 03-OCT-13, 10.30 – 12.30, in English 04-OCT-13, 8.30 – 10.30, in English 08-OCT-13, 10.30 – 12.30, in French 09-OCT-13, 10.30 – 12.30, in English 15-OCT-13, 10.30 – 12.30, in French 17-OCT-13, 10.30...

Safety Training: places available in February 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   February 2013 (alphabetical order) Noise - Understanding the risks 01-FEB-13, 10.00 – 12.30, in French Magnetic Fields 08-FEB-13, 9.00 – 11.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 18-FEB-13 to 19-FEB-13, 8.30 – 17.30, in French Self-Rescue Mask Training 05-FEB-13, 8.30 – 10.00, in French 05-FEB-13, 10.30 – 12.00, in French 12-FEB-13, 8.30 – 10.00, in French 12-FEB-13, 10.30 – 12.00, in French 14-FEB-13, 8.30 – 10.00, en anglais 14-FEB-13, 10.30 – 12.00, en anglais 19-FEB-13, 8.30 – 10.00, in French 19-FEB-13, 10.30 – 12.00, in French 21-FEB-13, 8.30 – 10.00, en anglais 21-FEB-13, 10.30 – 12.00, en anglais 26-FEB-13, 8.30 &ndash...

Safety Training: Ergonomie - Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours d'ergonomie (durée : 1 jour) Sensibilisation aux gestes et postures de travail. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

HySTAR: the hydrogen safety training and risk workplace

International Nuclear Information System (INIS)

Hay, R.

2006-01-01

This paper shows the output of the software package HySTAR, the Hydrogen Safety, Training and Risk Workplace. This is the software output of the CTFA, Canadian Hydrogen Safety Program projects. It shows the Hydrogen Virtual Interactive Expert Workplace, a guide for permitting and code enforcement for officials and other parties involved in approving hydrogen energy facilities. It also shows the Hydrogen Codes and Standards Report (Site Level) as well as Hydrogen Distances and Clearances Report

Status and problem for Nuclear Power Plant Maintenance Training Center

International Nuclear Information System (INIS)

Nanjoh, Takuo

1991-01-01

The Nuclear Power Plant Maintenance Training Center of Kansai Electric Power Co., Inc. was founded in October, 1983, and seven years elapsed since then. The education and training of 37,000 persons were carried out to meet the situation in the plants and to enhance the facilities. Though the main policy of the practical training for preventing the recurrence of troubles does not change, the situation changed from the time of the foundation, and the role has expanded, including PA activities. The see-through plant model installed for technical education in April, 1989 is the about 1/25 scale model of the actual machine with two loops, which actually generates steam and slight electric power, and is useful for promoting the understanding of nuclear power generation theory. It accomplishes the important role that the visitors to the Center (7500 persons in 1989 fiscal year) understand the mechanism of nuclear power generation. In 1990, the education curriculum, the method of education, the time of education and so on are reviewed, aiming at the improvement of education. The execution of education and training, the training of practical techniques, the reflection of the examples of troubles to education, and the expansion of facilities are reported. (K.I.)

Safety Training: Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

Training for an effective health and safety committee in a small business setting.

Science.gov (United States)

Crollard, Allison; Neitzel, Richard L; Dominguez, Carlos F; Seixas, Noah S

2013-01-01

Health and safety committees are often heralded as a key element of successful health and safety programs, and are thought to represent a means of engaging workers in health and safety efforts. While the understanding of the factors that make these committees effective is growing, there are few resources for how to assist committees in developing these characteristics. This paper describes one approach to creating and implementing a training intervention aimed at improving health and safety committee function at one multilingual worksite. Short-term impacts were evaluated via questionnaire and qualitative observations of committee function. Results indicated high satisfaction with the training as well as modest increases in participation, cooperation, role clarity, and comfort with health and safety skills among committee members. The committee also made considerable achievements in establishing new processes for effective function. Similar interventions may be useful in other workplaces to increase health and safety committee success.

Perspectives on reactor safety. Revision 1

International Nuclear Information System (INIS)

Haskin, F.E.; Hodge, S.A.

1997-11-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor safety concepts. The course consists of five modules: (1) the development of safety concepts; (2) severe accident perspectives; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course

Perspectives on reactor safety. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A. [Oak Ridge National Lab., TN (United States). Engineering Technology Div.

1997-11-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor safety concepts. The course consists of five modules: (1) the development of safety concepts; (2) severe accident perspectives; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

Safety in the mountaineering practices: training in Physical Education

Directory of Open Access Journals (Sweden)

Mónica Palacio

2016-07-01

Full Text Available Physical Education Teaching with Orientation in Regional Mountain Activities at the Universidad Nacional del Comahue (PEF-CRUB-UNCo is the only one in the country that has a history with over 20 years of training physical education teachers with a particular orientation. It was through dynamic and continuous work over the years that theoretical and practical appropriate contents could be defined for this career.(Palacios, Lopez, Schneider, 2011 Coincidences with those experiences made in other countries such as Spain and Germany where the climbing activities are part of the teacher training and educational curricula have been noticed. (Saez Padilla, Gimenez, Fuentes Guerra 2005; Arribas Cubero 2008; Winter, 2000. It was determined together with other authors (Hepp, Güllich and Heidorn, 2001 that the contents related to Trekking and Climbing are the correct ones to develop a Teaching Program with these characteristics. The handling of safety conditions as an educational content is a permanent concern that challenges the activity. This paper will explain the conditions of safety that had been compiled over the years from experience, permanent research, consultation of specialized literature and actions carried out in teacher training

Progress report of Cekmece Nuclear Research and Training Center for 1980

International Nuclear Information System (INIS)

1982-01-01

Presented are the research works carried out in 1980 in Physics, Chemistry, Nuclear engineering, Radiobiology, Reactor operation and reactor enlargement, Health physics, Radioisotope production, Electronic, Industrial application of radioisotopes, Nuclear fuel technology, Technical services, Construction control, Publication and documentation, Training division of Cekmece Nuclear Research and Training Center

Development of an Evaluation Tool for Online Food Safety Training Programs

Science.gov (United States)

Neal, Jack A., Jr.; Murphy, Cheryl A.; Crandall, Philip G.; O'Bryan, Corliss A.; Keifer, Elizabeth; Ricke, Steven C.

2011-01-01

The objective of this study was to provide the person in charge and food safety instructors an assessment tool to help characterize, identify strengths and weaknesses, determine the completeness of the knowledge gained by the employee, and evaluate the level of content presentation and usability of current retail food safety training platforms. An…

Functional design criteria for the Hazardous Materials Management and Emergency Response (HAMMER) Training Center. Revision 1

International Nuclear Information System (INIS)

Sato, P.K.

1995-01-01

Within the United States, there are few hands-on training centers capable of providing integrated technical training within a practical application environment. Currently, there are no training facilities that offer both radioactive and chemical hazardous response training. There are no hands-on training centers that provide training for both hazardous material operations and emergency response that also operate as a partnership between organized labor, state agencies, tribes, and local emergency responders within the US Department of Energy (DOE) complex. Available facilities appear grossly inadequate for training the thousands of people at Hanford, and throughout the Pacific Northwest, who are required to qualify under nationally-mandated requirements. It is estimated that 4,000 workers at the Hanford Site alone need hands-on training. Throughout the Pacific Northwest, the potential target audience would be over 30,000 public sector emergency response personnel, as well as another 10,000 clean-up workers represented by organized labor. The HAMMER Training Center will be an interagency-sponsored training center. It will be designed, built, and operated to ensure that clean-up workers, fire fighters, and public sector management and emergency response personnel are trained to handle accidental spills of hazardous materials. Training will cover wastes at clean-up sites, and in jurisdictions along the transportation corridors, to effectively protect human life, property, and the environment

Training center leadership strategies for the future

International Nuclear Information System (INIS)

1996-01-01

In the next five years there will be significant changes in the nuclear power industry. Nuclear training centers will be affected since they are such an important part of most nuclear power plants. This paper will propose a methodology for determining a course of action for writing a strategic plan, will identify some trends which may affect your future and will offer a selection of possible actions for the readers' consideration

31 CFR Appendix K to Subpart C of... - Federal Law Enforcement Training Center

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Federal Law Enforcement Training Center K Appendix K to Subpart C of Part 1 Money and Finance: Treasury Office of the Secretary of the Treasury DISCLOSURE OF RECORDS Privacy Act Pt. 1, Subpt. C, App. K Appendix K to Subpart C of Part 1—Federal Law Enforcement Training Center 1. In...

Nuclear Criticality Safety Organization guidance for the development of continuing technical training. Revision 1

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in nuclear criticality safety at the Oak Ridge Y-12 Plant and throughout the DOE complex. Continuing technical training is training outside of the initial qualification program to address identified organization-wide needs. Typically, this training is used to improve organization performance in the conduct of business. This document provides guidelines for the development of the technical portions of the Continuing Training Program. It is not a step-by-step procedure, but a collection of considerations to be used during the development process

Safety Training: places available in May 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   May 2013 (alphabetical order) Conduite de chariots élévateurs (driving of forklifts) 06-MAY-13 to 07-MAY-13, 8.30 – 17.30, in French with handouts in English Self Rescue Mask Training 02-MAY-13, 8.30 – 10.00, in English 02-MAY-13, 10.30 – 12.00, in English 07-MAY-13, 8.30 – 10.00, in French 07-MAY-13, 10.30 – 12.00, in English 14-MAY-13, 8.30 – 10.00, in French 14-MAY-13, 10.30 – 12.00, in French 16-MAY-13, 8.30 – 10.00, in English 16-MAY-13, 10.30 – 12.00, in English 21-MAY-13, 8.30 – 10.00, in French 21-MAY-13, 10.30 – 12.00, in French 23-MAY-13, 8.30 – 10.00, in English 23-MAY-13, 10.30 – 12.00, in English 28-MAY-13, 8.30 – 10.00, in French 28-MAY-13, 10.30 – 12.00, in French 30-MAY-1...

Safety Training: places available in January 2013

CERN Document Server

Isabelle CUSATO, HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   January 2013 (alphabetical order) Ergonomics - Applying ergonomic principles in the workplace 24-JAN-13 to 24-JAN-13, 9:00 – 12:00, in English Etre TSO au CERN 23-JAN-13 to 25-JAN-13, 9:00 – 17:30, in French Self-Rescue Mask training 08-JAN-13 to 08-JAN-13, 8:30 – 10:00, in French 08-JAN-13 to 08-JAN-13, 10:30 – 12:00, in French 10-JAN-13 to 10-JAN-13, 8:30 – 10:00, in English 10-JAN-13 to 10-JAN-13, 10:30 – 12:00, in English 15-JAN-13 to 15-JAN-13, 8:30 – 10:00, in French 15-JAN-13 to 15-JAN-13, 10:30 – 12:00, in French 17-JAN-13 to 17-JAN-13, 8:30 – 10:00, in English 17-JAN-13 to 17-JAN-13, 10:30 – 12:00, in English 22-JAN-13 to 22-JAN-13, 8:30 – 10:00, in French 22-JAN-13 to 22-JAN-13, 10:30 – 12:00, in French 24-JAN-13 to 24-JAN-13,...

A Paradigm Shift in Law Enforcement Training in the Bahamas: Teacher-Centered to Learner-Centered

Directory of Open Access Journals (Sweden)

Hunter-Johnson, Yvonne

2012-10-01

Full Text Available This study focused on determining whether the learning preference of law enforcement officers in the Bahamas was either pedagogical (teacher-centered or andragogical (student-centered. Law enforcement personnel in a Bahamian police department were administered the Student Orientation Questionnaire (SOQ developed by Christian (1982. One hundred and sixty-eight individuals completed the SOQ. Chi square statistics were calculated on the variables of educational level and gender. The preferred learning orientation was primarily andragogical; those with higher education levels tended to have a higher andragogical orientation. There were no differences by gender. As a result of the findings, a three-step approach is proposed to transition the training environment from one that is teacher-centered to one that is learner-centered

Current status of international training center for nuclear security and security issues in Korea

International Nuclear Information System (INIS)

Lee, Jong-UK; Sin, Byung Woo

2013-01-01

During the 2010 Nuclear Security Summit (NSS) President Lee declared that Korea will establish an international training center (ITC) for nuclear security near the Korea Institute of Nuclear Nonproliferation and Control (KINAC). It will be open to the world in 2014. The government's long term goal is to make the center a hub for education and training in the nuclear field in Asia. The ITC will accomplish this by establishing facilities for practical and realistic exercises through the use of a test bed and various other experiments. The center will also provide comprehensive educational programs for nuclear newcomers. Its main programs include: a well designed educational program, customized training courses, and on-the-job training. This paper will discuss the current status of the ITC and describe practical plans for solving current security issues in Korea. (authors)

An Analysis of Trainers' Perspectives within an Ecological Framework: Factors that Influence Mine Safety Training Processes

Directory of Open Access Journals (Sweden)

Emily J. Haas

2014-09-01

Conclusion: This study offers a new technique to identify limitations in safety training systems and processes. The analysis suggests that training should be developed and disseminated with consideration of various levels—individual, interpersonal, organizational, and community—to promote skills. If factors identified within and between levels are addressed, it may be easier to sustain mineworker competencies that are established during safety training.

The West Virginia Occupational Safety and Health Initiative: practicum training for a new marketplace.

Science.gov (United States)

Meyer, J D; Becker, P E; Stockdale, T; Ducatman, A M

1999-05-01

Occupational medicine practice has experienced a shift from larger corporate medical departments to organizations providing services for a variety of industries. Specific training needs will accompany this shift in practice patterns; these may differ from those developed in the traditional industrial or corporate medical department setting. The West Virginia Occupational Health and Safety Initiative involves occupational medicine residents in consultation to a variety of small industries and businesses. It uses the expertise of occupational physicians, health and safety extension faculty, and faculty in engineering and industrial hygiene. Residents participate in multidisciplinary evaluations of worksites, and develop competencies in team-building, workplace health and safety evaluation, and occupational medical consulting. Specific competencies that address requirements for practicum training are used to measure the trainee's acquisition of knowledge and skills. Particular attention is paid to the acquisition of group problem-solving expertise, skills relevant to the current market in practice opportunities, and the specific career interests of the resident physician. Preliminary evaluation indicates the usefulness of training in evaluation of diverse industries and worksites. We offer this program as a training model that can prepare residents for the challenges of a changing marketplace for occupational health and safety services.

Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives' training in Catalan hospitals accredited as centers for normal birth.

Science.gov (United States)

Muñoz-Sellés, Ester; Vallès-Segalés, Antoni; Goberna-Tricas, Josefina

2013-11-15

The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives' level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

Annual report 1995 of the Central Safety Department, Research Center Karlsruhe

International Nuclear Information System (INIS)

Koelzer, W.

1996-04-01

The Central Safety Department is responsible for supervising, monitoring and, to some extent, also executing measures of radiation protection, industrial health and safety as well as physical protection and security at and for the institutes and departments of the Karlsruhe Research Center (Forschungszentrum Karlsruhe GmbH), and for monitoring liquid effluents and the environment of all facilities and nuclear installations on the premises of the Research Center. In addition, research and development work is carried out in the fields of behavior of tritium in the air/soil/plant system, tritium balances for nuclear fusion fuel cycles, and assessments of mining and ore dressing spoils. This report gives details of the different duties and reports the results of 1995 routine tasks, investigations and developments of the working groups of the Department. The reader is referred to the English translation of Chapter 1 describing the duties and organization of the Central Safety Department. (orig.) [de

Development of the video streaming system for the radiation safety training

International Nuclear Information System (INIS)

Uemura, Jitsuya

2005-01-01

Radiation workers have to receive the radiation safety training every year. It is very hard for them to receive the training within a limited chance of training. Then, we developed the new training system using the video streaming technique and opened the web page for the training on our homepage. Every worker is available to receive the video lecture at any time and at any place by using his PC via internet. After watching the video, the worker should receive the completion examination. It he can pass the examination, he was registered as a radiation worker by the database system for radiation control. (author)

Refresher training as an important factor affecting safety of atomic energy utilization facilities

International Nuclear Information System (INIS)

Kapralov, E.

2005-01-01

Refresher training appears to be one of the most important factors, affecting safety of atomic energy utilization facilities. To provide up-to-date refresher training programs and courses TC NRS implements best training practice based on the actual and perspective Russian national and international norms, regulations, standards and recommendations. (author)

Safer nuclear power. Strengthening training for operational safety at Paks nuclear power plant - Hungary

International Nuclear Information System (INIS)

2003-01-01

For a nuclear power plant, safety must always be paramount. There can be no compromise on safety to meet production targets or to reduce costs. For any reactor, and in particular where older type reactors are in place, their operational safety can be enhanced by upgrading the training of personnel responsible for operating and maintaining the plant. The Department of Technical Co-operation is sponsoring a programme with technical support from the Nuclear Energy and Nuclear Safety Departments to help improve facilities at the PAKS plant in Hungary and establish self sufficiency in training to the highest international standards for all levels of nuclear power plant manpower. The Model Project described will have a direct impact on the improvement of operational safety and performance at PAKS NPP. It will lead to a more efficient use of resources which in turn will result in lower electricity generation costs. The impact of the project is not expected to be limited to Hungary. WWER reactors are common in Eastern Europe and provide one third to one half of the electricity supply to the region. The training programmes and facilities at PAKS offer a possibility in the future to provide training to experts from other countries operating WWER units and serve as a model to be emulated. Slovakia and the Czech Republic have already expressed interest in using the PAKS experience

Safety Training: places available in April

CERN Multimedia

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. April 2012 (alphabetical order) Noise - Understanding the risks 18-APR-12, 10.00 – 12.30, in French Conduite de chariots élévateurs / Driving of forklifts 23-APR-12 to 24-APR-12, 09.00 – 17.30, in French (with possibility to have the handouts in English) First-aiders – Basic course 23-APR-12 to 24-APR-12, 08.30 – 17.30 and 08.30 – 12.30 (total: one day and a half), in French First Aiders - Refresher Course 24-APR-12, 13.30 – 17.30, in French Habilitation électrique personnel non électricien / Habilitation électrique for non electricians 02-APR-12 to 03-APR-12, 09.00 – 17.30 and 09.00 – 12.30 (total: one day and a half), in French Manipulation d’extincteurs : exercices sur feux réels / Use of fire extinguisher ...

Design of 3D simulation engine for oilfield safety training

Science.gov (United States)

Li, Hua-Ming; Kang, Bao-Sheng

2015-03-01

Aiming at the demand for rapid custom development of 3D simulation system for oilfield safety training, this paper designs and implements a 3D simulation engine based on script-driven method, multi-layer structure, pre-defined entity objects and high-level tools such as scene editor, script editor, program loader. A scripting language been defined to control the system's progress, events and operating results. Training teacher can use this engine to edit 3D virtual scenes, set the properties of entity objects, define the logic script of task, and produce a 3D simulation training system without any skills of programming. Through expanding entity class, this engine can be quickly applied to other virtual training areas.

The present condition of the radiation safety control education in training schools for radiological technologists

International Nuclear Information System (INIS)

Takahashi, Yasuyuki; Saito, Kyoko; Hirai, Shoko; Igarashi, Hiroshi; Negishi, Tooru; Hirano, Kunihiro; Kawaharada, Yasuhiro

2010-01-01

We made a detailed study on the course of study in radiation safety control prescribed on March 28, 2003. Questionnaires were sent to 39 training schools for radiological technology, to which 66.7% replied (26/39). Subjects on radiation safety control must include knowledge and technology in both radiation control and medical safety. The contents for instruction of radiation control were in accordance with those given in the traditional program; however, some discrepancies were found in the contents of medical safety. As medical safety, emphasized by the revised Medical Service Law, is regarded as very important by many hospitals, safety control education that include medical ethics should be required as part of the curriculum in the training schools for radiological technologists. (author)

Safety Training: Ergonomie - Sensibilisation à l'ergonomie bureautique

CERN Multimedia

2005-01-01

Nous vous proposons une 1/2 journée de sensibilisation sur les risques engendrés par une mauvaise posture lors du travail sur écran (mal de dos, fatigue visuelle, douleurs des poignets...) et des bonnes pratiques pour y remédier. Les prochaines sessions auront lieu le 24 février 2005 (matin et après-midi). Les cours sont pris en charge par la Commission de Sécurité et animés par Pily Clemente et Marion Ribordy de « PM postures ». L'inscription via EDH est obligatoire. Pour plus d'information et inscription par EDH à ce cours, veuillez consulter les pages Formation et Développement (groupe sécurité) de HR, ou contacter l'organisateur. Les places seront attribuées dans l'ordre de réception des inscriptions. Organisateur : Ana-Paula Bernardes/SC-GS (71385) Ana-paula.bernardes@cern.ch FORMATION EN SECURITE SAFETY TRAINING safety.training@ce...

EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

OpenAIRE

Elvira Mikhailovna Rebko

2016-01-01

The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University) in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions...

Safety Training: "Manual Handling" course in September

CERN Multimedia

Safety Training, HSE Unit

2016-01-01

The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work.   The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue. 

Practice of Job Seeker Training Conducted by Polytechnic Center and Polytechnic University

Science.gov (United States)

Hoshino, Minoru; Ikeda, Tomozumi; Shiota, Yasuhito

Job seeker training for six months for 15 members was performed by Polytechnic Center Kanto in Yokohama from January, 2006. The injection mold was completed by having made training and a training subject correspond. And employment of all the members who consist of 90 persons during the 6 periods was completed. Furthermore, job seeker training for ten months for ten members was performed by the Polytechnic University from January, 2010. Then, The difficult injection mold was completed and all the members were employed. This paper discussed job seeker training and an employment result.

Peer training of safety-related skills to institutional staff: benefits for trainers and trainees.

OpenAIRE

van Den Pol, R A; Reid, D H; Fuqua, R W

1983-01-01

A peer training program, in which experienced staff trained new staff, was evaluated as a method for teaching and maintaining safety-related caregiver skills in an institutional setting for the developmentally disabled. Three sets of safety-type skills were assessed in simulated emergency situations: responding to facility fires, managing aggressive attacks by residents, and assisting residents during convulsive seizures. Using a multiple-baseline research design, results indicated that the p...

Occupational risk perception, safety training, and injury prevention: testing a model in the Italian printing industry.

Science.gov (United States)

Leiter, Michael P; Zanaletti, William; Argentero, Piergiorgio

2009-01-01

This study examined occupational risk perception in relation to safety training and injuries. In a printing industry, 350 workers from 6 departments completed a survey. Data analysis showed significant differences in risk perceptions among departments. Differences in risk perception reflected the type of work and the injury incidents in the departments. A structural equation analysis confirmed a model of risk perception on the basis of employees' evaluation of the prevalence and lethalness of hazards as well as the control over hazards they gain from training. The number of injuries sustained was positively related to the perception of risk exposure and negatively related to evaluations about the safety training. The results highlight the importance of training interventions in increasing workers' adoption of safety procedures and prevention of injuries.

A survey of food safety training in small food manufacturers.

Science.gov (United States)

Worsfold, Denise

2005-08-01

A survey of food safety training was conducted in small food manufacturing firms in South Wales. Structured interviews with managers were used to collect information on the extent and level of food hygiene and HACCP training and the manager's perceptions of and attitude towards training. All the businesses surveyed had undertaken some hygiene training. Hygiene induction programmes were often unstructured and generally unrecorded. Low-risk production workers were usually trained on the job whilst high-care production staff were trained in hygiene to Level 1. Part-time and temporary staff received less training than full-timers. Regular refresher training was undertaken by less than half of the sample. None of the businesses made use of National Vocational Qualification (NVQ) qualifications. Over half of the managers/senior staff had undertaken higher levels of hygiene training and half had attended a HACCP course. Managers trained the workforce to operate the HACCP system. Formal training-related activities were generally only found in the larger businesses. Few of the manufacturers had made use of training consultants. Managers held positive attitudes towards training but most regarded it as operating expense rather than an investment. Resource poverty, in terms of time and money was perceived to be a major inhibiting factor to continual, systematic training.

Selection, specification, design and use of various nuclear power plant training simulators

International Nuclear Information System (INIS)

Bruno, R.; Neboyan, V.

1997-01-01

Several IAEA guidance publications on safety culture and NPP personnel training consider the role of training and particularly the role of simulators training to enhance the safety of NPP operations. Initially, the focus has been on full-scope simulators for the training of main control room operators. Presently, a wide range of different types of simulators are used at training center. Several guidance publications concerning development and use of full-scope simulators are currently available. Experience shows that other types of simulators are also effective training tools that allow simulator training for a broader range of target groups and training objectives. Based on this need, the IAEA undertook a project to prepare a report on selection, specification, design and use of various training simulators, which provides guidance to training centers and suppliers for proper selection, specification, design, and use of various form of simulators. In addition, it provides examples of their use in several Member States. This paper presents a summary of the IAEATECDOC publication on the subject. (author)

Commuter Train Passenger Safety Model Using Positive Behavior Approach: The Case Study in Suburban Area

Science.gov (United States)

Suryanto, D. A.; Adisasmita, S. A.; Hamid, S.; Hustim, M.

2018-04-01

Currently, Train passanger safety measures are more predominantly measurable using negative dimensions in user mode behavior, such as accident rate, accident intensity and accident impact. This condition suggests that safety improvements aim only to reduce accidents. Therefore, this study aims to measure the safety level of light train transit modes (KRL) through the dimensions of traveling safety on commuters based on positive safety indicators with severel condition departure times and returns for work purposes and long trip rates above KRL. The primary survey were used in data collection methods. Structural Equation Modeling (SEM) were used in data analysis. The results show that there are different models of the safety level of departure and return journey. The highest difference is in the security dimension which is the internal variable of KRL users.

Using a Training Video to Improve Agricultural Workers' Knowledge of On-Farm Food Safety

Science.gov (United States)

Mathiasen, Lisa; Morley, Katija; Chapman, Benjamin; Powell, Douglas

2012-01-01

A training video was produced and evaluated to assess its impact on the food safety knowledge of agricultural workers. Increasing food safety knowledge on the farm may help to improve the safety of fresh produce. Surveys were used to measure workers' food safety knowledge before and after viewing the video. Focus groups were used to determine…

The ARAMCO Industrial Traiing Centers: Academic Training and College Preparatory Programs: A Descriptive Report.

Science.gov (United States)

ARAMCO Services Co., Houston, TX.

The report describes the components of the educational program provided by the Industrial Training Centers of the Training and Career Development Organization of ARAMCO (Arabian American Oil Company) in Saudi Arabia. ARAMCO provides in-house academic or job skills training to over 15,000 employees. Characteristics of the company's training program…

The occupational safety of health professionals working at community and family health centers.

Science.gov (United States)

Ozturk, Havva; Babacan, Elif

2014-10-01

Healthcare professionals encounter many medical risks while providing healthcare services to individuals and the community. Thus, occupational safety studies are very important in health care organizations. They involve studies performed to establish legal, technical, and medical measures that must be taken to prevent employees from sustaining physical or mental damage because of work hazards. This study was conducted to determine if the occupational safety of health personnel at community and family health centers (CHC and FHC) has been achieved. The population of this cross-sectional study comprised 507 nurses, 199 physicians, and 237 other medical personnel working at a total of 18 family health centers (FHC) and community health centers (CHC) in Trabzon, Turkey. The sample consisted of a total of 418 nurses, 156 physicians, and 123 other medical personnel. Sampling method was not used, and the researchers tried to reach the whole population. Data were gathered with the Occupational Safety Scale (OSS) and a questionnaire regarding demographic characteristics and occupational safety. According to the evaluations of all the medical personnel, the mean ± SD of total score of the OSS was 3.57 ± 0.98; of the OSS's subscales, the mean ± SD of the health screening and registry systems was 2.76 ± 1.44, of occupational diseases and problems was 3.04 ± 1.3 and critical fields control was 3.12 ± 1.62. In addition, occupational safety was found more insufficient by nurses (F = 14.18; P occupational safety to be insufficient as related to protective and supportive activities.

Activities of the nuclear emergency assistance and training center. Strengthening co-operation with parties in normal circumstances

International Nuclear Information System (INIS)

Watanabe, Fumitaka; Matsui, Tomoaki; Nomura, Tamotsu

2005-01-01

The Japan Nuclear Cycle Development Institute (JNC) and the Japan Atomic Energy Research Institute (JAERI) established the Nuclear Emergency Assistance and Training Center (NEAT) in March 2002. The center aims to provide various support nuclear safety regulatory bodies, local governments and nuclear facility licenses as specialists about nuclear and radiological issues according to the role shown in the Basic Disaster Management Plan. Upon a nuclear and/or radiological disaster occurring in Japan, NEAT will send specialists to the disaster scene, and offer the use of special equipments. NEAT maintains frequent contact with related organizations in normal circumstance. NEAT also participates in nuclear emergency exercises instructed by the parties concerned, which has contributed to the brewing of mutual trust with related organizations. In October 2005, JNC and JAERI merged into a new organization named the Japan Atomic Energy Agency (JAEA). NEAT, as a section of the organization, continuously deals with nuclear emergencies. (author)

Implementation of digital safety related I and C systems at nuclear power plants. A systematic approach to training

International Nuclear Information System (INIS)

Roedig, Peter; Schoenfelder, Christian

2012-01-01

In the past, refurbishment or modernization projects at nuclear power plants (NPP) dealing with the AREVA product for safety related digital instrumentation and control (I and C) systems, i.e. TELEPERM registered XS (TXS), regularly led to the development and implementation of different project specific training courses. They mostly dealt with a basic introduction to TELEPERM registered XS, as well as project specific engineering of TELEPERM registered XS and maintenance of the TELEPERM registered XS system supplied with the project. However, it gradually emerged that diverse training needs of different personnel involved in refurbishment or modernization projects as well as in new build projects had to be considered in more detail. Additionally, each target group, e.g. project managers, project engineers, technical engineers, commissioning engineers, operating and maintenance personnel, will have to work with TELEPERM registered XS at different phases within a project. Consequently, it became necessary to take into account the diverse training and project needs. According to the Systematic Approach to Training (SAT) process as developed and promoted by the International Atomic Energy Agency (IAEA), a job and task analysis was performed. After identification of related training needs and redesigning as well as modification or development of appropriate training material, a comprehensive, standardized TELEPERM registered XS training offer is now available at the AREVA Reactor Training Center. This training offer can be easily adapted to project or customer specific requirements. (orig.)

Transfusion safety: is this the business of blood centers?

Science.gov (United States)

Slapak, Colleen; Fredrich, Nanci; Wagner, Jeffrey

2011-12-01

ATSO is in a unique position to break down organizational silos between hospitals and blood centers through the development of a collaborative relationship between the two entities. Use of the TSO as blood center staff centralizes the role into a consultative position thereby retaining the independence of the hospitals. The TSO position then becomes a value-added service offered by the blood center designed to supplement processes within the hospital.Whether the TSO is based in the hospital or the blood center, improvements are gained through appropriate utilization of blood components, reductions in hospital costs, ongoing education of hospital staff involved in transfusion practice, and increased availability of blood products within the community. Implementation and standardization of best practice processes for ordering and administration of blood products developed by TSOs leads to improved patient outcomes. As a liaison between hospitals and blood centers, the TSO integrates the mutual goal of transfusion safety: the provision of the safest blood product to the right patient at the right time for the right reason.

Identification of training and emergency-planning needs through job-safety analysis

Energy Technology Data Exchange (ETDEWEB)

Veltrie, J.

1987-01-01

Training and emergency-planning needs within the photovoltaic industry may be more accurately determined through the performance of detailed job-safety analysis. This paper outlines the four major components of such an analysis, namely operational review, hazards evaluation, personnel review and resources evaluation. It then shows how these may be developed into coherent training and planning recommendations, for both emergency and non-emergency situations.

A theory-driven, longitudinal evaluation of the impact of team training on safety culture in 24 hospitals.

Science.gov (United States)

Jones, Katherine J; Skinner, Anne M; High, Robin; Reiter-Palmon, Roni

2013-05-01

Effective teamwork facilitates collective learning, which is integral to safety culture. There are no rigorous evaluations of the impact of team training on the four components of safety culture-reporting, just, flexible and learning cultures. We evaluated the impact of a year-long team training programme on safety culture in 24 hospitals using two theoretical frameworks. We used two quasi-experimental designs: a cross-sectional comparison of hospital survey on patient safety culture (HSOPS) results from an intervention group of 24 hospitals to a static group of 13 hospitals and a pre-post comparison of HSOPS results within intervention hospitals. Dependent variables were HSOPS items representing the four components of safety culture; independent variables were derived from items added to the HSOPS that measured the extent of team training, learning and transfer. We used a generalised linear mixed model approach to account for the correlated nature of the data. 59% of 2137 respondents from the intervention group reported receiving team training. Intervention group HSOPS scores were significantly higher than static group scores in three dimensions assessing the flexible and learning components of safety culture. The distribution of the adoption of team behaviours (transfer) varied in the intervention group from 2.8% to 31.0%. Adoption of team behaviours was significantly associated with odds of an individual reacting more positively at reassessment than baseline to nine items reflecting all four components of safety culture. Team training can result in transformational change in safety culture when the work environment supports the transfer of learning to new behaviour.

Criticality safety training at the Hot Fuel Examination Facility

International Nuclear Information System (INIS)

Garcia, A.S.; Courtney, J.C.; Thelen, V.N.

1983-01-01

HFEF comprises four hot cells and out-of-cell support facilities for the US breeder program. The HFEF criticality safety program includes training in the basic theory of criticality and in specific criticality hazard control rules that apply to HFEF. A professional staff-member oversees the implementation of the criticality prevention program

Medical students' situational motivation to participate in simulation based team training is predicted by attitudes to patient safety.

Science.gov (United States)

Escher, Cecilia; Creutzfeldt, Johan; Meurling, Lisbet; Hedman, Leif; Kjellin, Ann; Felländer-Tsai, Li

2017-02-10

Patient safety education, as well as the safety climate at clinical rotations, has an impact on students' attitudes. We explored medical students' self-reported motivation to participate in simulation-based teamwork training (SBTT), with the hypothesis that high scores in patient safety attitudes would promote motivation to SBTT and that intrinsic motivation would increase after training. In a prospective cohort study we explored Swedish medical students' attitudes to patient safety, their motivation to participate in SBTT and how motivation was affected by the training. The setting was an integrated SBTT course during the surgical semester that focused on non-technical skills and safe treatment of surgical emergencies. Data was collected using the Situational Motivation Scale (SIMS) and the Attitudes to Patient Safety Questionnaire (APSQ). We found a positive correlation between students' individual patient safety attitudes and self-reported motivation (identified regulation) to participate in SBTT. We also found that intrinsic motivation increased after training. Female students in our study scored higher than males regarding some of the APSQ sub-scores and the entire group scored higher or on par with comparable international samples. In order to enable safe practice and professionalism in healthcare, students' engagement in patient safety education is important. Our finding that students' patient safety attitudes show a positive correlation to motivation and that intrinsic motivation increases after training underpins patient safety climate and integrated teaching of patient safety issues at medical schools in order to help students develop the knowledge, skills and attitudes required for safe practice.

Freight-train derailment rates for railroad safety and risk analysis.

Science.gov (United States)

Liu, Xiang; Rapik Saat, M; Barkan, Christopher P L

2017-01-01

Derailments are the most common type of train accident in the United States. They cause damage to infrastructure, rolling stock and lading, disrupt service, and have the potential to cause casualties, and harm the environment. Train safety and risk analysis relies on accurate assessment of derailment likelihood. Derailment rate - the number of derailments normalized by traffic exposure - is a useful statistic to estimate the likelihood of a derailment. Despite its importance, derailment rate analysis using multiple factors has not been previously developed. In this paper, we present an analysis of derailment rates on Class I railroad mainlines based on data from the U.S. Federal Railroad Administration and the major freight railroads. The point estimator and confidence interval of train and car derailment rates are developed by FRA track class, method of operation and annual traffic density. The analysis shows that signaled track with higher FRA track class and higher traffic density is associated with a lower derailment rate. The new accident rates have important implications for safety and risk management decisions, such as the routing of hazardous materials. Copyright © 2016 Elsevier Ltd. All rights reserved.

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 1, August 2012

International Nuclear Information System (INIS)

2012-08-01

The IAEA has a statutory function to establish standards for the protection of health, life and property against ionizing radiation and to provide for the application of these standards to peaceful nuclear activities. Education and training (E and T) is one of the main mechanisms to provide support to Member States in the application of the standards. In 2000, an internal evaluation of the overall education and training programme was undertaken. The conclusions were that the provision of and support for E and T in Member States tended to be on a reactive rather than proactive basis, contributing to a culture of dependency rather than sustainability. On the basis of this evaluation, a strategic approach to education and training in radiation and waste safety was developed that outlined the objectives and outcomes to be achieved over a ten year period (2001-2010). General Conference Resolutions have underlined or emphasized the importance of sustainable programmes for education and training in radiation, transport and waste safety, and have also welcomed the ongoing commitment of the Secretariat and Member States to the implementation of the strategy. A Steering Committee for Education and Training in Radiation Protection and Waste Safety was established in 2002, with the mission of advising the IAEA on the implementation of the strategy and making recommendations as appropriate. In 2010, the Steering Committee analysed the overall achievement of the strategic approach 2011-2010, refined the vision of the original strategy and redefined the related objectives. The Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) was submitted to the IAEA's policy-making organs and was noted by its Board of Governors in September 2010.

Survey and analysis of radiation safety management systems at medical institutions. Initial report. Radiation protection supervisor, radiation safety organization, and education and training

International Nuclear Information System (INIS)

Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

2005-01-01

In this study, a questionnaire survey was carried out to determine the actual situation of radiation safety management systems in Japanese medical institutions with nuclear medicine facilities. The questionnaire consisted of questions concerning the Radiation Protection Supervisor license, safety management organizations, and problems related to education and training in safety management. Analysis was conducted according to region, type of establishment, and number of beds. The overall response rate was 60%, and no significant difference in response rate was found among regions. Medical institutions that performed nuclear medicine practices without a radiologist participating accounted for 10% of the total. Medical institutions where nurses gave patients intravenous injections of radiopharmaceuticals as part of the nuclear medicine practices accounted for 28% of the total. Of these medical institutions, 59% provided education and training in safety management for nurses. The rate of acquisition of Radiation Protection Supervisor licenses was approximately 70% for radiological technologists and approximately 20% for physicians (regional difference, p=0.02). The rate of medical institutions with safety management organizations was 71% of the total. Among the medical institutions (n=208) without safety management organizations, approximately 56% had 300 beds or fewer. In addition, it became clear that 35% of quasi-public organizations and 44% of private organizations did not provide education and training in safety management (p<0.001, according to establishment). (author)

Amarillo National Resource Center for Plutonium. Quarterly technical progress report, May 1, 1997--July 31, 1997

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Progress summaries are provided from the Amarillo National Center for Plutonium. Programs include the plutonium information resource center, environment, public health, and safety, education and training, nuclear and other material studies.

Conversion of Provider EMR Training from Instructor-Led Training to eLearning at an Academic Medical Center.

Science.gov (United States)

Sharp, Karen; Williams, Michele; Aldrich, Alison; Bogacz, Adrienne; Denier, Sighle; McAlearney, Ann S

2017-07-26

This case study overviews the conversion of provider training of the electronic medical record (EMR) from an instructor-led training (ILT) program to eLearning at an Academic Medical Center (AMC). This conversion provided us with both a useful training tool and the opportunity to maximize efficiency within both our training and optimization team and organization. eLearning Development Principles were created and served as a guide to assist us with designing an eLearning curriculum using a five step process. The result was a new training approach that allowed learners to complete training at their own pace, and even test out of sections based on demonstrated competency. The information we have leads us to believe that a substantial return on our investment can be obtained from the conversion with positive impacts that have served as the foundation for the future of end user EMR training at our AMC.

Business of Nuclear Safety Analysis Office, Nuclear Technology Test Center

International Nuclear Information System (INIS)

Hayakawa, Masahiko

1981-01-01

The Nuclear Technology Test Center established the Nuclear Safety Analysis Office to execute newly the works concerning nuclear safety analysis in addition to the works related to the proving tests of nuclear machinery and equipments. The regulations for the Nuclear Safety Analysis Office concerning its organization, business and others were specially decided, and it started the business formally in August, 1980. It is a most important subject to secure the safety of nuclear facilities in nuclear fuel cycle as the premise of developing atomic energy. In Japan, the strict regulation of safety is executed by the government at each stage of the installation, construction, operation and maintenance of nuclear facilities, based on the responsibility for the security of installers themselves. The Nuclear Safety Analysis Office was established as the special organ to help the safety examination related to the installation of nuclear power stations and others by the government. It improves and puts in order the safety analysis codes required for the cross checking in the safety examination, and carries out safety analysis calculation. It is operated by the cooperation of the Science and Technology Agency and the Agency of Natural Resources and Energy. The purpose of establishment, the operation and the business of the Nuclear Safety Analysis Office, the plan of improving and putting in order of analysis codes, and the state of the similar organs in foreign countries are described. (Kako, I.)

Patient-led training on patient safety: a pilot study to test the feasibility and acceptability of an educational intervention.

Science.gov (United States)

Jha, V; Winterbottom, A; Symons, J; Thompson, Z; Quinton, N; Corrado, O J; Melville, C; Watt, I; Torgerson, D; Wright, J

2013-09-01

Training in patient safety is an important element of medical education. Most educational interventions on patient safety training adopt a 'health-professional lens' with limited consideration on the impact of safety lapses on the patient and their families and little or no involvement of patients in the design or delivery of the training. This paper describes a pilot study to test the feasibility and acceptability of implementing a patient-led educational intervention to facilitate safety training amongst newly qualified doctors. Patients and/or carers who had experienced harm during their care shared narratives of their stories with trainees; this was followed by a focused discussion on patient safety issues exploring the causes and consequences of safety incidents and lessons to be learned from these. The intervention, which will be further tested in an NIHR-funded randomised controlled trial (RCT), was successfully implemented into an existing training programme and found acceptance amongst the patients and trainees. The pilot study proved to be a useful step in refining the intervention for the RCT including identifying appropriate outcome measures and highlighting organisational issues.

Safety Training: Sensibilisation aux gestes et postures de travail

CERN Multimedia

Laetitia Laddada

2004-01-01

Nous vous proposons un nouveau cours de sécurité lié aux manutentions manuelles (durée 1 jour) : Sensibilisation aux gestes et postures de travail. Si vous êtes amené à manipuler régulièrement des charges lourdes ou volumineuses, cette formation peut vous aider à prévenir les lésions musculaires ou dorsales. A l'issue de cette formation, vous serez capable d'adopter et d'appliquer les principes de base de sécurité physique et d'économie d'efforts dans les manipulations d'objets. Les cours sont pris en charge par la Commission de Sécurité. L'inscription EDH est obligatoire. Pour plus d'information, veuillez consulter les pages Formation & Développement (Groupe Sécurité). Formation & Développement (Groupe Sécurité) FORMATION EN SECURITE SAFETY TRAINING Laetitia Laddada 73811 - 79236 safety.training@cern.ch

Improving mine safety technology and training: establishing US global leadership

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-15

In 2006, the USA's record of mine safety was interrupted by fatalities that rocked the industry and caused the National Mining Association and its members to recommit to returning the US underground coal mining industry to a global mine safety leadership role. This report details a comprehensive approach to increase the odds of survival for miners in emergency situations and to create a culture of prevention of accidents. Among its 75 recommendations are a need to improve communications, mine rescue training, and escape and protection of miners. Section headings of the report are: Introduction; Review of mine emergency situations in the past 25 years: identifying and addressing the issues and complexities; Risk-based design and management; Communications technology; Escape and protection strategies; Emergency response and mine rescue procedures; Training for preparedness; Summary of recommendations; and Conclusions. 37 refs., 3 figs., 5 apps.

Safety Training - places available in October

CERN Multimedia

Isabelle CUSATO, HSE Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. October 2012 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 08-OCT-12 to 09-OCT-12, 9.00 – 17.30, in French 11-OCT-12 to 12-OCT-12, 9.00 – 17.30, in French 17-OCT-12 to 18-OCT-12, 9.00 – 17.30, in French 29-OCT-12 to 30-OCT-12, 9.00 – 17.30, in French With the possibility to have the handouts in English Echafaudages - Réception, conformité (Scaffolding - reception, conformity) 24-OCT-12 to 26-OCT-12, 8.30 – 17.30, in French (location: Domarin, French department 38) First Aiders - Basic Course 04-OCT-12, 8.30 – 17.30, in English Habilitation électrique personnel non électricien (non electricians) 03-OCT-12 to 04-OCT-12, 9.00 – 17.30 (total 1.5 day), in English...

Training courses for the staff of the nuclear power station KRSKO conducted at the TRIGA reactor center in Ljubljana

International Nuclear Information System (INIS)

Pregl, G.; Najzer, M.

1976-01-01

The training program for the Nuclear Power Station Krsko was divided into two modules: fundamentals of nuclear engineering and specialized training according to duties that candidates are supposed to take at the power station. Basic training was organized at the TRIGA Reactor Center in Ljubljana in two different versions. The first version intended for plant operators and all engineers lasted for six months and included about 500 hours of classroom lessons and seminars and 31 laboratory experiments. The educational program was conventional. The following topics were covered: nuclear and atomic physics, reactor theory, reactor dynamics, reactor instrumentation and control, heat transfer in nuclear power plants, nuclear power plant systems, reactor materials, reactor safety, and radiation protection. Until now, two groups, consisting of 37 candidates altogether, have attended this basic course. Plans have been made to conduct two additional courses of about 20 students each for technicians other than operators. The program of this second version will be reduced, with the emphasis on reactor core physics and radiation protection. Classroom lessons will be strongly supported by laboratory experiments. (author)

Safety Training: places available in April 2014

CERN Multimedia

Safety Training team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   April 2014 (alphabetical order) ATEX Habilitation - Level 2 03-APR-14 to 04-APR-14, 9.00 – 17.30, in French Cryogenic Safety - Level 1 10-APR-14, 10.00 – 12.00, in English Electrical Palett Truck – Driving 15-APR-14, 8.30 – 12.30, in French (hand-outs in English for non-French-speaking participants) Fire Extinguisher 09-APR-14, 10.30 – 12.00, in French 16-APR-14, 10.30 – 12.00, in English 23-APR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 03-APR-14, 8.30 – 17.30, in French 10-APR-14, 8.30 – 17.30, in English 16-APR-14, 8.30 – 17.30, in English 24-APR-14, 8.30 – 17.30, in English First Aider - Level 1 – Refresher 17-APR-14, 8.30 – 12.30, in English 17-APR-14, 13.30 – 17.30, in...

Education and training requirements in the revised European Basic Safety Standards Directive

International Nuclear Information System (INIS)

Mundigl, S.

2009-01-01

The European Commission is currently developing a modified European Basic Safety Standards Directive covering two major objectives: the consolidation of existing European Radiation Protection legislation, and the revision of the European Basic Safety Standards. The consolidation will merge the following five Directives into one single Directive: the Basic Safety Standards Directive, the Medical Exposures Directive, the Public Information Directive, the Outside Workers Directive, and the Directive on the Control of high-activity sealed radioactive sources and orphan sources. The revision of the European Basic Safety Standards will take account of the latest recommendations by the International Commission on Radiological Protection (ICRP) and shall improve clarity of the requirements where appropriate. It is planned to introduce more binding requirements on natural radiation sources, on criteria for clearance, and on the cooperation between Member States for emergency planning and response, as well as a graded approach for regulatory control. One additional goal is to achieve greater harmonisation between the European BSS and the international BSS. Following a recommendation from the Article 31 Group of Experts, the current draft of the modified BSS will highlight the importance of education and training by dedicating a specific title to radiation protection education, training and information. This title will include a general requirement on the Member States to ensure the establishment of an adequate legislative and administrative framework for providing appropriate radiation protection education, training and information. In addition, there will be specific requirements on training in the medical field, on information and training of workers in general, of workers potentially exposed to orphan sources, and to emergency workers. The revised BSS directive will include requirements on the competence of a radiation protection expert (RPE) and of a radiation protection

A community sharing hands-on centers in engineer's training

Directory of Open Access Journals (Sweden)

jean-pierre jpt Taboy

2006-02-01

Full Text Available As teachers in Technical Universities, we must think about the engineer's training. We need good applicants, up to date hardware and software for hand-on. Each university don't have enough money and technical people to cover the new needs. A community sharing remote hand-on centers could be a solution.

78 FR 35935 - National Institute for Occupational Health (NIOSH)-Certified B Readers; Training and Testing

Science.gov (United States)

2013-06-14

... training and certification program by developing digital- format training materials and examinations. Core...; Training and Testing AGENCY: National Institute for Occupational Safety and Health (NIOSH) of the Centers...: Request for information and comment on priority knowledge and competency items to address in training and...

Perspectives on reactor safety

Energy Technology Data Exchange (ETDEWEB)

Haskin, F.E. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Chemical and Nuclear Engineering; Camp, A.L. [Sandia National Labs., Albuquerque, NM (United States)

1994-03-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course.

Perspectives on reactor safety

International Nuclear Information System (INIS)

Haskin, F.E.

1994-03-01

The US Nuclear Regulatory Commission (NRC) maintains a technical training center at Chattanooga, Tennessee to provide appropriate training to both new and experienced NRC employees. This document describes a one-week course in reactor, safety concepts. The course consists of five modules: (1) historical perspective; (2) accident sequences; (3) accident progression in the reactor vessel; (4) containment characteristics and design bases; and (5) source terms and offsite consequences. The course text is accompanied by slides and videos during the actual presentation of the course

Development of training courses in the field of nuclear energy

International Nuclear Information System (INIS)

Lee, Han Young; Soe, In Seok; Lee, Ui Jin; Park, Jae Chang; Kim, Ik Hyeon; Won, Jong Yeol; Nam, Jae Yeol

1993-12-01

The nuclear training center provides various training courses in such areas of nuclear energy as nuclear power technology, radioisotope applications technology, non-destructive technology, nuclear safety, etc. The center also provides in-house staff training courses in project management, computer applications, and other research areas. The objective of the project is to develop new specialized training courses not only nuclear energy areas but also in management, so that localization of nuclear project can be accomplished as early as possible. The scope and contents of the project envision the following aims; 1. to develop specialized nuclear training programs; 2. to develop project management training courses for KAERI staff; 3. to collect and analyze foreign training programs and materials; 4. to develop foreign-assisted training courses; and 5. to develop international training courses for developing country trainese

Integrating Safety in the Aviation System: Interdepartmental Training for Pilots and Maintenance Technicians

Science.gov (United States)

Mattson, Marifran; Petrin, Donald A.; Young, John P.

2001-01-01

The study of human factors has had a decisive impact on the aviation industry. However, the entire aviation system often is not considered in researching, training, and evaluating human factors issues especially with regard to safety. In both conceptual and practical terms, we argue for the proactive management of human error from both an individual and organizational systems perspective. The results of a multidisciplinary research project incorporating survey data from professional pilots and maintenance technicians and an exploratory study integrating students from relevant disciplines are reported. Survey findings suggest that latent safety errors may occur during the maintenance discrepancy reporting process because pilots and maintenance technicians do not effectively interact with one another. The importance of interdepartmental or cross-disciplinary training for decreasing these errors and increasing safety is discussed as a primary implication.

A Guide to the Design of Occupational Safety and Health Training for Immigrant, Latino/a Dairy Workers.

Science.gov (United States)

Menger, Lauren M; Rosecrance, John; Stallones, Lorann; Roman-Muniz, Ivette Noami

2016-01-01

Industrialized dairy production in the U.S. relies on an immigrant, primarily Latino/a, workforce to meet greater production demands. Given the high rates of injuries and illnesses on U.S. dairies, there is pressing need to develop culturally appropriate training to promote safe practices among immigrant, Latino/a dairy workers. To date, there have been few published research articles or guidelines specific to developing effective occupational safety and health (OSH) training for immigrant, Latino/a workers in the dairy industry. Literature relevant to safety training for immigrant workers in agriculture and other high-risk industries (e.g., construction) was examined to identify promising approaches. The aim of this paper is to provide a practical guide for researchers and practitioners involved in the design and implementation of effective OSH training programs for immigrant, Latino/a workers in the dairy industry. The search was restricted to peer-reviewed academic journals and guidelines published between 1980 and 2015 by universities or extension programs, written in English, and related to health and safety training among immigrant, Latino/a workers within agriculture and other high-risk industries. Relevant recommendations regarding effective training transfer were also included from literature in the field of industrial-organizational psychology. A total of 97 articles were identified, of which 65 met the inclusion criteria and made a unique and significant contribution. The review revealed a number of promising strategies for how to effectively tailor health and safety training for immigrant, Latino/a workers in the dairy industry grouped under five main themes: (1) understanding and involving workers; (2) training content and materials; (3) training methods; (4) maximizing worker engagement; and (5) program evaluation. The identification of best practices in the design and implementation of training programs for immigrant, Latino/a workers within

Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 4, August 2014

International Nuclear Information System (INIS)

2014-08-01

IAEA’s Division of Radiation, Transport and Waste Safety is assisting Member States to develop national strategies for education and training in radiation, transport and waste safety via the regional projects on “Strengthening Education and Training Infrastructure, and Building Competence in Radiation Safety” (RAF/9/04, RAS/9/066, RER/9/109 and RLA/9/070). The regional workshops conducted in 2012 in this area and the results achieved were presented in the previous issues of this newsletter focussing specifically on each region of the Technical Cooperation Programme (Africa, Asia and the Pacific, Europe and Latin America). In the course of 2013, a new cycle of Regional Workshops was conducted. The workshops held in the regions of Africa, Asia and the Pacific, and Europe mainly focussed on Sharing Experience and Progress made in establishing a National Strategy for Education and Training in Radiation, Transport and Waste Safety (pages 2-5). The workshop held in the region of Latin America mainly focussed on Developing and Implementing Education and Training programmes. An overview on the results achieved by participating Member States for the period 2012-2013 is provided

IAEA activities on education and training in radiation and waste safety: Strategic approach for a sustainable system

International Nuclear Information System (INIS)

Mrabit, Khammar; Sadagopan; Geetha

2003-01-01

The statutory safety functions of the International Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the resolutions of its General Conferences and reflects the latest IAEA standards and guidance. In response to GC(44)/RES/13, the IAEA prepared a 'Strategic Approach to Education and Training in Radiation and Waste Safety' aiming at establishing, by 2010, sustainable education a training programmes in Member States. This Strategy was endorsed by General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States' national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. In the last General Conference 2002, the IAEA was urged to continue to implement the Strategy, including the convening of the Steering Committee. The first Technical Committee meeting took place during the week 25-29 November 2002. (author)

Improving Chemical Plant Safety Training Using Virtual Reality

OpenAIRE

Nasios, Konstantinos

2002-01-01

The chemical engineering industry often requires people to work in hazardous environments and to operate complicated equipment which often limits the type of training that be carried out on site. The daily job of chemical plant operators is becoming more demanding due to the increasing plant complexity together with increasing requirements on plant safety, production capacity, product quality and cost effectiveness. The importance of designing systems and environments that are as safe as poss...

49 CFR 214.353 - Training and qualification of roadway workers who provide on-track safety for roadway work groups.

Science.gov (United States)

2010-10-01

... RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.353 Training and qualification of roadway workers who provide on-track safety for roadway work groups. (a) The training and qualification of roadway... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of roadway workers who...

Verification of the safety communication protocol in train control system using colored Petri net

International Nuclear Information System (INIS)

Chen Lijie; Tang Tao; Zhao Xianqiong; Schnieder, Eckehard

2012-01-01

This paper deals with formal and simulation-based verification of the safety communication protocol in ETCS (European Train Control System). The safety communication protocol controls the establishment of safety connection between train and trackside. Because of its graphical user interface and modeling flexibility upon the changes in the system conditions, this paper proposes a composition Colored Petri Net (CPN) representation for both the logic and the timed model. The logic of the protocol is proved to be safe by means of state space analysis: the dead markings are correct; there are no dead transitions; being fair. Further analysis results have been obtained using formal and simulation-based verification approach. The timed models for the open transmit system and the application process are created for the purpose of performance analysis of the safety communication protocol. The models describe the procedure of data transmission and processing, and also provide relevant timed and stochastic factors, as well as time delay and lost packet, which may influence the time for establishment of safety connection of the protocol. Time for establishment of safety connection of the protocol in normal state is verified by formal verification, and then time for establishment of safety connection with different probability of lost packet is simulated. After verification it is found that the time for establishment of safety connection of the safety communication protocol satisfies the safety requirements.

Training Programs on Radiological Safety for users of Ionizing Radiations in Peru; Programas de formacion en proteccion radiologica para usuarios de radiaciones ionizantes en el Peru

Energy Technology Data Exchange (ETDEWEB)

Medina Gironzini, E.

2003-07-01

In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country, grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well as the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc..., are part of the continuous education program of CSEN. (Author)

Editorial: Advances in healthcare provider and patient training to improve the quality and safety of patient care

OpenAIRE

Elizabeth M. Borycki

2015-01-01

This special issue of the Knowledge Management & E-Learning: An International Journal is dedicated to describing “Advances in Healthcare Provider and Patient Training to Improve the Quality and Safety of Patient Care.” Patient safety is an important and fundamental requirement of ensuring the quality of patient care. Training and education has been identified as a key to improving healthcare provider patient safety competencies especially when working with new technologies such as electronic ...

A Practical Risk Assessment Methodology for Safety-Critical Train Control Systems

Science.gov (United States)

2009-07-01

This project proposes a Practical Risk Assessment Methodology (PRAM) for analyzing railroad accident data and assessing the risk and benefit of safety-critical train control systems. This report documents in simple steps the algorithms and data input...

The method research of the simulator training and examination of the nuclear electricity staff

International Nuclear Information System (INIS)

Huang Fangzhi; Zhang Yuanfang

1994-01-01

The simulator training and examination of nuclear power plant operator are of an important guarantee for the nuclear power plant operation safety. The authors introduce various training courses which have been held in the Nuclear Power Plant Simulation Training Center of Tsinghua University since 1988, and analyze the different requirements and features for different classes such as operator candidate training course, operator retraining course and nuclear and electricity staff course. The lesson arrangement, examination method and mark standard are presented, which is carried out in the Nuclear Power Plant Simulation Training Center of Tsinghua University

The specific tasks of RF TSO - FSUE VO 'Safety', related with Implementation of obligations under the Convention on Nuclear Safety

International Nuclear Information System (INIS)

Potapov, V.; Kuznetsov, M.; Kapralov, E.

2010-01-01

It was more than 20 years ago that IAEA discussed the issue pertaining to the need in scientific and engineering support to the regulatory body. The Convention on Nuclear Safety being the keystone in assurance of the global nuclear safety and security regime was adopted in 1994. It is pointed out that two independent organizations supervised by Rostechnadzor have been established within the Russian TSO system, FSUE VO 'Safety' being one of them. The tasks of the organization comprise obligatory certification of equipment as well as acceptance of equipment before its delivery to the NPP both in Russia and in the countries constructing the power units based on the Russian designs. The acceptance procedure has been set forth in the new Russian document at the level of the federal rules and regulations for nuclear safety assurance. As far as its implementation decision is concerned, a task for selection and training of personnel has been set and allocated on the Training and Methodological Center of Nuclear and Radiation Safety established with the support of FSUE VO 'Safety', which provides training programmes and specific lecture courses in the wide range of the relevant topics. (author)

IAEA education and training in radiation protection, transport and waste safety-status and new developments for sustainability

International Nuclear Information System (INIS)

Sadagopan, G.; Mrabit, K.; Wheatley, J.

2008-01-01

IAEA 's education and training activities in radiation, transport and waste safety follow the IAEA vision, strategy and resolutions of its annual General Conferences and reflect the latest IAEA standards and guidance. IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in Member States, which was endorsed by the GC(45)/RES/10C in 2001. In implementing the strategy, IAEA is organising training events at the regional level and assisting the Member States at the national level by providing them the exemplary quality of training material developed at the IAEA. This work will continue ensuring its completeness in all areas of radiation safety. An Inter Centre Network between the Agency and regional, collaborating national training centres is established to facilitate information exchange, improve communication and dissemination of training material. There is a challenge to enhance the technical capability of the Member States to reach sustainability. This is intended through organising number of Train the Trainers events to develop a pool of qualified trainers. The new developments include establishing E-learning, developing a syllabus for training of Radiation Protection Officers and training materials, information materials for radiation workers. These are aimed at assisting Member States attain self sustainability. (author)

Effect of a manager training and certification program on food safety and hygiene in food service operations.

Science.gov (United States)

Kassa, Hailu; Silverman, Gary S; Baroudi, Karim

2010-05-06

Food safety is an important public health issue in the U.S. Eating at restaurants and other food service facilities increasingly has been associated with food borne disease outbreaks. Food safety training and certification of food mangers has been used as a method for reducing food safety violations at food service facilities. However, the literature is inconclusive about the effectiveness of such training programs for improving food safety and protecting consumer health. The purpose of this study was to examine the effect of food manger training on reducing food safety violations. We examined food inspection reports from the Toledo/Lucas County Health Department (Ohio) from March 2005 through February 2006 and compared food hygiene violations between food service facilities with certified and without certified food managers. We also examined the impact on food safety of a food service facility being part of a larger group of facilities.Restaurants with trained and certified food managers had significantly fewer critical food safety violations but more non-critical violations than restaurants without certified personnel. Institutional food service facilities had significantly fewer violations than restaurants, and the number of violations did not differ as a function of certification. Similarly, restaurants with many outlets had significantly fewer violations than restaurants with fewer outlets, and training was not associated with lower numbers of violations from restaurants with many outlets. The value of having certified personnel was only observed in independent restaurants and those with few branches. This information may be useful in indicating where food safety problems are most likely to occur. Furthermore, we recommend that those characteristics of institutional and chain restaurants that result in fewer violations should be identified in future research, and efforts made to apply this knowledge at the level of individual restaurants.

Safety Training: places available in March 2013

CERN Multimedia

Isabelle Cusato, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registration, please refer to the Safety Training Catalogue.   March 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 18-MAR-13 to 19-MAR-13, 8.30 – 17.30, in French with handouts in English First-Aiders – Basic course 14-MAR-13, 8.15 – 17.30, in French 21-MAR-13, 8.15 – 17.30, in English 28-MAR-13, 8.15 – 17.30, in French Habilitation électrique personnel électricien basse et haute tension (habilitation électrique for electricians in low and high voltage) 11-MAR-13 to 22-MAR-13 (total hours : 32), 9.00 – 17.30, in English Habilitation électrique personnel non électricien (electrical habilitation for non electricians) 27-MAR-13 to 28-MAR-13, 9.00 – 17.30, in French Habilitation électrique perso...

Safety Training: places available in June 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   June 2013 (alphabetical order) First Aiders - Basic Course 13-JUN-13, 8.15 – 17.30, in English First Aiders - Refresher Course 06-JUN-13, 8.15 – 12.30, in French 06-JUN-13, 13.15 – 17.30, in French Habilitation ATEX niveau 1 (Habilitation ATEX level 1) 28-JUN-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse et haute tensions (habilitation électrique for electricians in low and high voltage) 10-JUN-13 to 13-JUN-13, 9.00 – 17.30, in English Habilitation électrique personnel non électricien (habilitation électrique for non electricians) 03-JUN-13 (afternoon) to 04-JUN-13 (full day), 9.00 – 17.30, in English Laser Experts 03-JUN-13 to 04-JUN-13, 9.00 – 17.30, in English Laser Users 28-JUN-...

The TRIPOD e-learning Platform for the Training of Earthquake Safety Assessment

International Nuclear Information System (INIS)

Coppari, S.; Di Pasquale, G.; Goretti, A.; Papa, F.; Papa, S.; Paoli, G.; Pizza, A. G.; Severino, M.

2008-01-01

The paper summarizes the results of the in progress EU Project titled TRIPOD (Training Civil Engineers on Post-Earthquake Safety Assessment of Damaged Buildings), funded under the Leonardo Da Vinci program. The main theme of the project is the development of a methodology and a learning platform for the training of technicians involved in post-earthquake building safety inspections. In the event of a catastrophic earthquake, emergency building inspections constitute a major undertaking with severe social impact. Given the inevitable chaotic conditions and the urgent need of a great number of specialized individuals to carry out inspections, past experience indicates that inspection teams are often formed in an adhoc manner, under stressful conditions, at a varying levels of technical expertise and experience, sometime impairing the reliability and consistency of the inspection results. Furthermore each Country has its own building damage and safety assessment methodology, developed according to its experience, laws, building technology and seismicity. This holds also for the partners participating to the project (Greece, Italy, Turkey, Cyprus), that all come from seismically sensitive Mediterranean countries. The project aims at alleviating the above shortcomings by designing and developing a training methodology and e-platform, forming a complete training program targeted at inspection engineers, specialized personnel and civil protection agencies. The e-learning platform will provide flexible and friendly authoring mechanisms, self-teaching and assessment capabilities, course and trainee management, etc. Courses will be also made available as stand-alone multimedia applications on CD and in the form of a complete pocket handbook. Moreover the project will offer the possibility of upgrading different experiences and practices: a first step towards the harmonization of methodologies and tools of different Countries sharing similar problems. Finally, through wide

Electric Power Research Institute: Environmental Technology Control Center, report to the Steering committee. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

This report describes test for air pollution control of flue gas and mercury as a result of coal combustion. The NYSEG Kintigh Station provided flue gas to the Center 100% of the time during this performance period. As the Kintigh Station operated with a variety of coals, fluctuations in the Center`s inlet SO{sub 2} concentrations were experienced. Safety training for the month was conducted by the O&M Superintendent, Maintenance Supervisor and Shift Supervisors. {open_quotes}Personal Protective Equipment{close_quotes} was the topic of the month. Inspections of the ECTC Facility and safety equipment (SCR air-packs, fire extinguishers, etc.) were completed and recorded this month. All systems were found to be in good condition. By continuing to emphasize safe work habits at the Center, we have raised the total number of days without a lost time injury to 1426 as of 4/30/96. The monthly safety meeting with the NYSEG Kintigh Station was held on April 30, 1996 with both NYSEG and ECTC representatives. The topics of discussion included an overview of NYSEG`s upcoming alternate fuel burn, an update on plant staffing changes, and a discussion of future safety training activities.

An innovative approach to interdisciplinary occupational safety and health education.

Science.gov (United States)

Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

2011-07-01

The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

A knowledge-centered paradigm for operations and design

International Nuclear Information System (INIS)

Perin, C.

2005-01-01

A paradigm premised on the reactor design basis and on its systems, structures, and components also governs nuclear power plant operations. This machine-centered paradigm emphasizes a functional and discipline-based division of responsibilities, which can create hierarchical 'silos' and 'stovepipes' inhibiting the development and lateral exchange of knowledge about safety-critical system interactions. A knowledge-centered paradigm instead encourages the timely development, analysis, and exchange of information about system conditions and their likely consequences. This new paradigm puts operational focus on the importance of operating experience, informative root cause analyses, effective corrective actions, and cross-discipline exchange and cooperation. Although the knowledge-centered paradigm is already central to three main strategies of risk reduction, it is less likely to be recognized as such in terms of priorities, resources, and training: configuration control, control room operations, and root cause analysis. To maintain the capacity for safe shutdown and to preserve public trust, the knowledge-centered paradigm places as high a priority on interactions of safety-critical knowledge as it does on interactions of safety-critical systems, structures, and components. (author)

Development of training course for high school 'Safety culture at nuclear facilities of Ukraine'

International Nuclear Information System (INIS)

Begun, V.V.; Shirokov, S.V.

2008-01-01

The content of new training course is considered. The course is introduced on the recommendations of the Institute for National Safety Issues of SNBO of Ukraine. The objective and tasks of the training are presented as a list of future knowledge and skills

Safety Training: places available in February

CERN Multimedia

DGS Unit

2012-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. FEBRUARY 2012 (alphabetical order) Conduite de Plates-Formes Elevatrices Mobiles de Personnel (PEMP) / Cherry-picker driving : 09-FEB-12 au 10-FEB-12, 08.00 – 17.30, in French (with possibility to have handouts in English) Magnetic Fields : 03-FEB-12, 9.30 – 12.00, in French Self-rescue mask : 02-FEB-12, 8.30 – 10.00, in French 02-FEB-12, 10.30 – 12.00, in English 07-FEB-12, 8.30 – 10.00, in French 07-FEB-12, 10.30 – 12.00, in English 14-FEB-12, 8.30 – 10.00, in French 14-FEB-12, 10.30 – 12.00, in English 16-FEB-12, 8.30 – 10.00, in French 16-FEB-12, 10.30 – 12.00, in English 21-FEB-12, 8.30 – 10.00, in French 21-FEB-12, 10.30 – 12.00, in English 28-FEB-12, 8.30 – 10.00, in French 28-FEB-12, 10.30 – 12.00, in English Radiologic...

The operating organization and the recruitment, training and qualification of personnel for research reactors. Safety guide

International Nuclear Information System (INIS)

2008-01-01

This Safety Guide provides recommendations on meeting the requirements on the operating organization and on personnel for research reactors. It covers the typical operating organization for research reactor facilities; the recruitment process and qualification in terms of education, training and experience; programmes for initial and continuing training; the authorization process for those individuals having an immediate bearing on safety; and the processes for their requalification and reauthorization

Field studies of safety security rescue technologies through training and response activities

Science.gov (United States)

Murphy, Robin R.; Stover, Sam

2006-05-01

This paper describes the field-oriented philosophy of the Institute for Safety Security Rescue Technology (iSSRT) and summarizes the activities and lessons learned during calendar year 2005 of its two centers: the Center for Robot-Assisted Search and Rescue and the NSF Safety Security Rescue industry/university cooperative research center. In 2005, iSSRT participated in four responses (La Conchita, CA, Mudslides, Hurricane Dennis, Hurricane Katrina, Hurricane Wilma) and conducted three field experiments (NJTF-1, Camp Hurricane, Richmond, MO). The lessons learned covered mobility, operator control units, wireless communications, and general reliability. The work has collectively identified six emerging issues for future work. Based on these studies, a 10-hour, 1 continuing education unit credit course on rescue robotics has been created and is available. Rescue robots and sensors are available for loan upon request.

The company's management puts priority on safety

International Nuclear Information System (INIS)

Tomek, J.

2006-01-01

On 29-30 June, 2006, the training for workers of the Slovenske elektrarne, a. s. was organized to explain the most important management safety aspects on leadership awareness (Nuclear Leadership Awareness Course). The course was held at the regional consultation center in Jaslovske Bohunice. (author)

The European Nuclear Safety Training and Tutoring Institute (ENSTTI). Annex III [Example of Knowledge Management and Training for TSOs

International Nuclear Information System (INIS)

2018-01-01

ENSTTI is an initiative of members of the ETSON. It was created in 2010 to put in place a high quality training mechanism to meet the training needs of experts at nuclear regulatory authorities and TSOs; to ensure the continuous development of qualified experts in this area; and to foster harmonization of technical practices in nuclear safety, nuclear security and radiation protection. This is achieved through the regular provision of vocational training and tutoring exclusively delivered by senior professionals of European TSOs that take into consideration the latest technical developments and is continuously up-dated and improved by applying a systematic approach to training.

Training courses on integrated safety assessment modelling for waste repositories

International Nuclear Information System (INIS)

Mallants, D.

2007-01-01

Near-surface or deep repositories of radioactive waste are being developed and evaluated all over the world. Also, existing repositories for low- and intermediate-level waste often need to be re-evaluated to extend their license or to obtain permission for final closure. The evaluation encompasses both a technical feasibility as well as a safety analysis. The long term safety is usually demonstrated by means of performance or safety assessment. For this purpose computer models are used that calculate the migration of radionuclides from the conditioned radioactive waste, through engineered barriers to the environment (groundwater, surface water, and biosphere). Integrated safety assessment modelling addresses all relevant radionuclide pathways from source to receptor (man), using in combination various computer codes in which the most relevant physical, chemical, mechanical, or even microbiological processes are mathematically described. SCK-CEN organizes training courses in Integrated safety assessment modelling that are intended for individuals who have either a controlling or supervising role within the national radwaste agencies or regulating authorities, or for technical experts that carry out the actual post-closure safety assessment for an existing or new repository. Courses are organised by the Department of Waste and Disposal

Maximising harm reduction in early specialty training for general practice: validation of a safety checklist.

Science.gov (United States)

Bowie, Paul; McKay, John; Kelly, Moya

2012-06-21

Making health care safer is a key policy priority worldwide. In specialty training, medical educators may unintentionally impact on patient safety e.g. through failures of supervision; providing limited feedback on performance; and letting poorly developed behaviours continue unchecked. Doctors-in-training are also known to be susceptible to medical error. Ensuring that all essential educational issues are addressed during training is problematic given the scale of the tasks to be undertaken. Human error and the reliability of local systems may increase the risk of safety-critical topics being inadequately covered. However adherence to a checklist reminder may improve the reliability of task delivery and maximise harm reduction. We aimed to prioritise the most safety-critical issues to be addressed in the first 12-weeks of specialty training in the general practice environment and validate a related checklist reminder. We used mixed methods with different groups of GP educators (n=127) and specialty trainees (n=9) in two Scottish regions to prioritise, develop and validate checklist content. Generation and refinement of checklist themes and items were undertaken on an iterative basis using a range of methods including small group work in dedicated workshops; a modified-Delphi process; and telephone interviews. The relevance of potential checklist items was rated using a 4-point scale content validity index to inform final inclusion. 14 themes (e.g. prescribing safely; dealing with medical emergency; implications of poor record keeping; and effective & safe communication) and 47 related items (e.g. how to safety-net face-to-face or over the telephone; knowledge of practice systems for results handling; recognition of harm in children) were judged to be essential safety-critical educational issues to be covered. The mean content validity index ratio was 0.98. A checklist was developed and validated for educational supervisors to assist in the reliable delivery of

33 CFR 334.1170 - San Pablo Bay, Calif.; gunnery range, Naval Inshore Operations Training Center, Mare Island...

Science.gov (United States)

2010-07-01

... range, Naval Inshore Operations Training Center, Mare Island, Vallejo. 334.1170 Section 334.1170... Operations Training Center, Mare Island, Vallejo. (a) The Danger Zone. A sector in San Pablo Bay delineated..., Vallejo, California, will conduct gunnery practice in the area during the period April 1 through September...

Beamline for Schools Safety Awareness Day

CERN Multimedia

Photo Service, CERN

2014-01-01

The first two teams to participate in CERN's Beamline for Schools project spent their first day at CERN at the Safety Training Center in Prévessin. They covered amongst others radiation protection, cryogenics and fire-fighting. The teams will spend the rest of the week at the T9 beamline.

Facility specialists and inspectorate staff of the nuclear regulatory authority training in the field of management systems in compliance with the latest IAEA standards

International Nuclear Information System (INIS)

Kapralov, E.; Kapralov, Y.; Kozlov, V.; Filimonov, G.

2007-01-01

A problem of reducing a human factor negative influence reduction upon nuclear safety should be solved on the whole at the expense of introducing integrated management systems with a comprehensive application of regulatory control, training and inspections. This paper covers FSUE VO Safety and Training and Methodical Center of Nuclear and Radiation Safety approach towards training matters, which is one of the key factors in implementing quality and safety management systems. (author)

Florida Public Health Training Center: Evidence-Based Online Mentor Program

Science.gov (United States)

Frahm, Kathryn A.; Alsac-Seitz, Biray; Mescia, Nadine; Brown, Lisa M.; Hyer, Kathy; Liburd, Desiree; Rogoff, David P.; Troutman, Adewale

2013-01-01

This article describes an Online Mentor Program (OMP) designed to support and facilitate mentorships among and between Florida Department of Health (FDOH) employees and USF College of Public Health students using a Web-based portal. The Florida Public Health Training Center (FPHTC) at the University of South Florida (USF) College of Public Health…

The Criticality Safety Information Resource Center (CSIRC) at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Henderson, B.D.; Meade, R.A.; Pruvost, N.L.

1999-01-01

The Criticality Safety Information Resource Center (CSIRC) at Los Alamos National Laboratory (LANL) is a program jointly funded by the U.S. Department of Energy (DOE) and the U.S. Nuclear Regulatory Commission (NRC) in conjunction with the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2. The goal of CSIRC is to preserve primary criticality safety documentation from U.S. critical experimental sites and to make this information available for the benefit of the technical community. Progress in archiving criticality safety primary documents at the LANL archives as well as efforts to make this information available to researchers are discussed. The CSIRC project has a natural linkage to the International Criticality Safety Benchmark Evaluation Project (ICSBEP). This paper raises the possibility that the CSIRC project will evolve in a fashion similar to the ICSBEP. Exploring the implications of linking the CSIRC to the international criticality safety community is the motivation for this paper

Innovative approach to training radiation safety regulatory professionals

International Nuclear Information System (INIS)

Gilley, Debbie Bray

2008-01-01

Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)

Safety and Environment- Masterplan 2020 of DLR's Rocket Test Center Lampoldhausen

Science.gov (United States)

Haberzettl, Andreas; Dommers, Michael

2013-09-01

The German Aerospace Center DLR is the German research institute with approximately 7000 employees in 16 domestic locations. Among the research priorities of the German Aerospace Center DLR includes aerospace, energy and transport. DLR is institutionally supported by federal and state governments.Next funding sources arise in the context of third-party funds business (contract research and public contracts and subsidiaries). Main activities of the test center Lampoldshausen are testing of ARIANE's main and upper stage engines in the frame of ESA contracts.In the last years the test center of the DLR in Lampoldshausen has grown strongly, so that the number of employees is actually of about 230. The testing department is mainly responsible for rocket combustion testing according to customer requirements.Two kinds of test facilities are operated, sea level test benches and the altitude simulation test facilities.In addition to the DLR's growth also the activities of the industrial partner ASTRIUM has been elevated so that actually nearly 600 employees are present on site Lampoldshausen.The management of the site in relation to safety and security requires special measures with special respect to the presence of more people inside the testing area in order to guarantee trouble-free and safe experimental operation onsite the DLR's test plants. In order to meet with the future needs of continuing growth, the security and safety requirements have to be adopted.This report gives comprehensive outlook information about future possible scenarios of our coming tasks.Main driving force for future requests is the evolution of the rocket ARIANE. The testing of the new upper stage test facility for ARIANE 5 midlife evolution has been started. A new test position P5.2 is foreseen to perform the qualification of the new upper stage with the VINCI engine. This project will be very complex, in parallel running operation processes will require special procedures related to the overall

Perceived Impacts of a Public Health Training Center Field Placement Program Among Trainees

Directory of Open Access Journals (Sweden)

Patrik eJohansson

2014-07-01

Full Text Available There is heightened interest in identifying the impact of the federally-funded Public Health Training Center (PHTC program. Although evaluation studies have been conducted of public health training in general, evaluations of PHTC programs are rare. Field placement components are Congressionally-mandated requirements of PHTCs. Field placements are typically intensive, supervised externships for students to gain public health experience with local health departments or non-profit organizations. We have found no published evaluations of PHTC field placement components. This may be because of their small size and unique nature. We designed and evaluated a 200-hour field placement program at an established Public Health Training Center. The evaluation included pre/post surveys measuring public health core competencies, and post-experience interviews. We found significant increases in three competency domains among trainees: policy development and program planning, communication skills, and community dimensions of practice. These outcomes contribute to an evidence base on the efficacy of PHTC field placement programs, and underscore their role in public health training.

Multi-center randomized controlled trial of cognitive treatment, placebo, oxybutynin, bladder training, and pelvic floor training in children with functional urinary incontinence

NARCIS (Netherlands)

van Gool, Jan D.; de Jong, Tom P. V. M.; Winkler-Seinstra, Pauline; Tamminen-Moebius, Tytti; Lax, Hildegard; Hirche, Herbert; Nijman, Rien J. M.; Hjalmas, Kelm; Jodal, Ulf; Bachmann, Hannsjoerg; Hoebeke, Piet; Vande Walle, Johan; Misselwitz, Joachim; John, Ulrike; Bael, An

Objective Functional urinary incontinence causes considerable morbidity in 8.4% of school-age children, mainly girls. To compare oxybutynin, placebo, and bladder training in overactive bladder (OAB), and cognitive treatment and pelvic floor training in dysfunctional voiding (DV), a multi-center

Multi-center randomized controlled trial of cognitive treatment, placebo, oxybutynin, bladder training, and pelvic floor training in children with functional urinary incontinence

NARCIS (Netherlands)

van Gool, Jan D.; de Jong, Tom P. V. M.; Winkler-Seinstra, Pauline; Tamminen-Möbius, Tytti; Lax, Hildegard; Hirche, Herbert; Nijman, Rien J. M.; Hjälmås, Kelm; Jodal, Ulf; Bachmann, Hannsjörg; Hoebeke, Piet; Walle, Johan Vande; Misselwitz, Joachim; John, Ulrike; Bael, An

2014-01-01

Functional urinary incontinence causes considerable morbidity in 8.4% of school-age children, mainly girls. To compare oxybutynin, placebo, and bladder training in overactive bladder (OAB), and cognitive treatment and pelvic floor training in dysfunctional voiding (DV), a multi-center controlled

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.

Ferruginous hawks on the Yakima Training Center

Energy Technology Data Exchange (ETDEWEB)

Mazaika, R.; Cadwell, L.L.

1994-07-01

Habitat quality for ferruginous hawks (Buteo regalis) is largely determined by availability of nest sites and adequate prey base. A limitation of one of these will limit the number of hawks in an area. In general, ferruginous hawks are adaptable to various nesting substrates and will nest in proximity to other closely related sympatric species (e.g., red-tailed hawk, Swainson`s hawk). This analysis focused on an assessment of prey base availability and habitat disturbance in the vicinity of historic nest sites and small mammal trap sites on the Yakima Training Center (YTC) in Washington State. The primary ground-disturbing activities on the YTC are associated with military training, fire, and grazing. In addition to the direct effect these activities can have on ferruginous hawks, indirect effects may result from changes in composition, density, and structure of vegetation that subsequently alter faunal population numbers and species diversity. A summary of results of small mammal trapping, population estimation, vegetative analysis and disturbance rating at seven trap sites during the time period of June through August of 1993 are presented.

IAEA Activities on Education and training in Radiation and Waste Safety: Strategic approach for a sustainable system

International Nuclear Information System (INIS)

Marabit, K.; Sadagopan, G.

2003-01-01

The statutory safety functions of the International Atomic Energy(IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place, enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. the IAEA education and training activities follow the resolutions of its General Conference and reflect the latest IAEA standards and guidance. Several General Conference resolutions have emphasized the importance of education and training (e. g. GC(XXXV)/RES/552 in 1991; GC(XXXVI)/RES/584 in 1992; GC(43)/RES/13 in 1999 and more recently GC(44)/RES/13 in 2000). In response to GC(44)/RES/13, the IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in its Member States. This Strategy was endorsed by the General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. A technical meeting was held in Vienna in March 2002 and concluded with an action plan for implementing the strategy up to 2010, the immediate action being the formation of a Steering Committee by the middle of 2002. This Steering Committee has the general remit to advise on the development and implementation of the strategy, as well as monitoring its progress. The first technical meeting of the Steering Committee took place on 25

[Training in patient safety in medical and nursing schools].

Science.gov (United States)

Mira, J J; Guilabert, M; Vitaller, J; Ignacio, E

2016-01-01

To compare the information on patient safety received by students of medicine and nursing. Cross-sectional study was conducted using a convenience sample of medical and nursing students of 3 Universities. The Latin Patient Safety Student Information and a test of 5 questions with 5 options were used. A sample of 79 students in each group was enrolled to detect differences of .3 units (bilateral estimation), considering 80% statistical power and 95% confidence interval. A total of 144 students replied (74 nursing and 70 medicine students). Nursing students achieved higher scores in the communication with patients factor (3.8 vs 3.2, P<.001) and proactive attitude to identify risks for patient safety (4.3 vs 3.8, P<.001). Medical students were more aware of the inevitability of adverse events (2.3 vs 3.1, P<.001). Ten (7%) students had only one fault in the test, and only one (1%) answered all questions correctly. The training in patient safety should be improved both in nursing and medicine, although nursing students receive more information. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Assessment of the effectiveness of training technology transfer activities at soviet-designed reactors

International Nuclear Information System (INIS)

Haber, S.; Shurberg, D.; Yoder, J.; Draper, D.

2003-01-01

The U.S. Department of Energy (DOE) has been working with personnel at Soviet-Designed Reactors (SDRs) to enhance management and operational safety by upgrading many areas of plant operations to levels that meet established international standards. Since 1992 this work has included activities related to training. The work initially focussed on the establishment of nuclear training centers in Russia and Ukraine and the transfer of U.S. training methodologies but has since expanded to include all Russian and Ukrainian nuclear power stations and training centers as well as SDRs within other countries. A key component to the work has been the determination of programmatic effectiveness. Of specific interest has been the success of the transfer of U.S. training methodologies to SDRs so the capability exists for independent expansion of training efforts. Of equal importance has been the question of whether the training programs being developed are having the desired impact on facility safety performance. While progress has been made in the evaluation of the impact of training on facility safety performance, the question has not yet been fully answered. The issue has been further confounded due to wide-ranging and concurrent changes being made beyond training to many aspects of facility operations and maintenance. This paper focuses on the selection of a strategy to upgrade and, as necessary, develop training programs to assist in the improvement of SDR safety. Difficulties encountered in the development of assessment strategies across all SDRs that are being worked with are discussed. In addition, measures collected related to the success of the overall program efforts and data indicating the success of the DOE efforts in the transfer and adoption by SDRs of an effective training methodology are outlined. (author)

John M. Eisenberg Patient Safety Awards. System innovation: Veterans Health Administration National Center for Patient Safety.

Science.gov (United States)

Heget, Jeffrey R; Bagian, James P; Lee, Caryl Z; Gosbee, John W

2002-12-01

In 1998 the Veterans Health Administration (VHA) created the National Center for Patient Safety (NCPS) to lead the effort to reduce adverse events and close calls systemwide. NCPS's aim is to foster a culture of safety in the Department of Veterans Affairs (VA) by developing and providing patient safety programs and delivering standardized tools, methods, and initiatives to the 163 VA facilities. To create a system-oriented approach to patient safety, NCPS looked for models in fields such as aviation, nuclear power, human factors, and safety engineering. Core concepts included a non-punitive approach to patient safety activities that emphasizes systems-based learning, the active seeking out of close calls, which are viewed as opportunities for learning and investigation, and the use of interdisciplinary teams to investigate close calls and adverse events through a root cause analysis (RCA) process. Participation by VA facilities and networks was voluntary. NCPS has always aimed to develop a program that would be applicable both within the VA and beyond. NCPS's full patient safety program was tested and implemented throughout the VA system from November 1999 to August 2000. Program components included an RCA system for use by caregivers at the front line, a system for the aggregate review of RCA results, information systems software, alerts and advisories, and cognitive acids. Following program implementation, NCPS saw a 900-fold increase in reporting of close calls of high-priority events, reflecting the level of commitment to the program by VHA leaders and staff.

Safety Training: places available in April 2013

CERN Multimedia

Isabelle CUSATO, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   April 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 15-APR-13 to 16-APR-13, 8.30 – 17.30, in French, with handouts in English Être TSO au CERN 09-APR-13 to 11-APR-13, 9.00 – 17.30, in French First-Aiders – Basic Course 18-APR-13, 8.15 – 17.30, in French First-Aiders – Refresher Course 04-APR-13, 8.15 – 12.30, in French 04-APR-13, 13.15 – 17.30, in French Habilitation ATEX niveau 2 (ATEX habilitation level 2) 11-APR-13 to 12-APR-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electricial habilitation for electricians in low voltage) 08-APR-13 to 10-APR-13, 9.00 – 17.30, in French Habilitation &eac...

Safety Training: places available in September 2013

CERN Document Server

Isabelle Cusato, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. September 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker driving) 12-SEP-13 au 13-SEP-13, 8.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 19-SEP-13, 9.00 – 12.00, in French Être TSO au CERN (Being TSO at CERN) 10-SEP-13 to 12-SEP-13, 8.30 – 17.30, in French Habilitation ATEX - niveau 2 (ATEX habilitation - level 2) 19-SEP-13 to 20-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electrical habilitation for electricians in low voltage) 11-SEP-13 to 13-SEP-13, 9.00 – 17.30, in English 23-SEP-13 to 25-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel non &eacut...

Safety Training: places available in February 2014

CERN Multimedia

The Safety Training Team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   February 2014 (alphabetical order) ATEX Habilitation - Level 1 04-FEB-14, 9.00 – 17.30, in French Electrical Work - Lock-out 05-FEB-14, 13.30 – 17.30, in French Ergonomics – Office 06-FEB-14, 9.00 – 12.00, in English Fire Extinguisher 26-FEB-14, 10.30 – 12.00, in French 05-FEB-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 20-FEB-14, 8.30 – 17.30, in French First Aider - Refresher 06-FEB-14, 8.30 – 12.30, in French 06-FEB-14, 13.30 – 17.30, in French 13-FEB-14, 8.30 – 12.30, in English 13-FEB-14, 13.30 – 17.30, in English Habilitation électrique - Electrician Low Voltage – Initial 10-FEB-14 to 12-FEB-14, 9.00 – 17.30, in French Habilitation électrique - Electrician ...

Safety Training: places available in March 2014

CERN Multimedia

Safety Training team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   March 2014 (alphabetical order) Ergonomics - Worksite and Workshop 24-MAR-14, 9.00 – 17.30, in French Fire Extinguisher 05-MAR-14, 10.30 – 12.00, in French 12-MAR-14, 8.30 – 10.00, in English 12-MAR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 27-MAR-14, 8.30 – 17.30, in English First Aider – Refresher 20-MAR-14, 8.30 – 12.30, in French 20-MAR-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage – Initial 17-MAR-14 to 19-MAR-14, 9.00 – 17.30, in French 24-MAR-14 to 26-MAR-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage – Initial 18-MAR-14 to 21-MAR-14, 9.00 – 17.30, in English Habilitation &eacut...

Safety Training: places available in January 2014

CERN Multimedia

Safety Training Team, HSE Unit

2014-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...

Safety Training: places available in January 2014

CERN Document Server

Safety Training Team, HSE Unit

2013-01-01

There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...

Thinking on the Training of Uniportal Video-assisted Thoracic Surgery

OpenAIRE

Yuming ZHU; Gening JIANG

2018-01-01

Recently, uniportal video-assisted thoracic surgery (VATS) has developed rapidly and has become the main theme of global surgical development. The specific, standardized and systematic training of this technology has become an important topic. Specific training in the uniportal VATS approach is crucial to ensure safety and radical treatment. Such training approach, including a direct interaction with experienced surgeons in high-volume centers, is crucial and represents an indispensable step....

SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

International Nuclear Information System (INIS)

Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K

2016-01-01

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing

SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

Energy Technology Data Exchange (ETDEWEB)

Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K [University of Washington, Seattle, WA (United States)

2016-06-15

Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing