WorldWideScience

Sample records for safety standards occupant

  1. 29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

    Science.gov (United States)

    2010-07-01

    ... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

  2. 48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

  3. 48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

    Science.gov (United States)

    2010-10-01

    ... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

  4. EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

    Directory of Open Access Journals (Sweden)

    J. Mojapelo

    2016-07-01

    Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

  5. 75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Science.gov (United States)

    2010-02-08

    ... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

  6. 77 FR 72998 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Science.gov (United States)

    2012-12-07

    ... [Docket No.: FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft... regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration (OSHA). This policy statement will enhance...

  7. 77 FR 75600 - Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin Crewmembers...

    Science.gov (United States)

    2012-12-21

    ... [Docket No. FAA-2012-0953] Policy Statement on Occupational Safety and Health Standards for Aircraft Cabin... announced a proposed policy statement regarding the regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. The...

  8. 77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2012-05-11

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

  9. 76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2011-04-01

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

  10. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  11. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2006-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  12. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    1999-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  13. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  14. Forest management practices and the occupational safety and health administration logging standard

    Science.gov (United States)

    John R. Myers; David Elton Fosbroke

    1995-01-01

    The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

  15. Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

    Science.gov (United States)

    Lewis, Robert K

    2016-10-01

    On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

  16. The occupational health and safety of flight attendants.

    Science.gov (United States)

    Griffiths, Robin F; Powell, David M C

    2012-05-01

    In order to perform safety-critical roles in emergency situations, flight attendants should meet minimum health standards and not be impaired by factors such as fatigue. In addition, the unique occupational and environmental characteristics of flight attendant employment may have consequential occupational health and safety implications, including radiation exposure, cancer, mental ill-health, musculoskeletal injury, reproductive disorders, and symptoms from cabin air contamination. The respective roles of governments and employers in managing these are controversial. A structured literature review was undertaken to identify key themes for promoting a future agenda for flight attendant health and safety. Recommendations include breast cancer health promotion, implementation of Fatigue Risk Management Systems, standardization of data collection on radiation exposure and health outcomes, and more coordinated approaches to occupational health and safety risk management. Research is ongoing into cabin air contamination incidents, cancer, and fatigue as health and safety concerns. Concerns are raised that statutory medical certification for flight attendants will not benefit either flight safety or occupational health.

  17. Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury.

    Science.gov (United States)

    Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

    2007-10-01

    To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery-related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. An interrupted time-series design was used to determine the standard's effect on fatality rates. Machinery-related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout-related fatalities. Linear regression was used to control for changes in demographic and economic factors. The average annual crude rate of machinery-related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non-significant increase of 0.05 deaths per 100 000 production worker full-time equivalents (95% CI -0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery-related fatalities in manufacturing. There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after.

  18. Effects of the Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury

    Science.gov (United States)

    Bulzacchelli, Maria T; Vernick, Jon S; Webster, Daniel W; Lees, Peter S J

    2007-01-01

    Objective To evaluate the impact of the United States' federal Occupational Safety and Health Administration's control of hazardous energy (lockout/tagout) standard on rates of machinery‐related fatal occupational injury. The standard, which took effect in 1990, requires employers in certain industries to establish an energy control program and sets minimum criteria for energy control procedures, training, inspections, and hardware. Design An interrupted time‐series design was used to determine the standard's effect on fatality rates. Machinery‐related fatalities, obtained from the National Traumatic Occupational Fatalities surveillance system for 1980 through 2001, were used as a proxy for lockout/tagout‐related fatalities. Linear regression was used to control for changes in demographic and economic factors. Results The average annual crude rate of machinery‐related fatalities in manufacturing changed little from 1980 to 1989, but declined by 4.59% per year from 1990 to 2001. However, when controlling for demographic and economic factors, the regression model estimate of the standard's effect is a small, non‐significant increase of 0.05 deaths per 100 000 production worker full‐time equivalents (95% CI −0.14 to 0.25). When fatality rates in comparison groups that should not have been affected by the standard are incorporated into the analysis, there is still no significant change in the rate of machinery‐related fatalities in manufacturing. Conclusions There is no evidence that the lockout/tagout standard decreased fatality rates relative to other trends in occupational safety over the study period. A possible explanation is voluntary use of lockout/tagout by some employers before introduction of the standard and low compliance by other employers after. PMID:17916891

  19. Occupational safety and health law handbook

    Energy Technology Data Exchange (ETDEWEB)

    Sarvadi, D.G. [ed.; Keller; Heckman

    1999-09-01

    This book reviews the regulations and standards governing the protection of employees in the workplace and provides insight into dealing with pertinent regulations and regulatory authorities. Written for safety professionals, industrial hygienists, human resource professionals, attorneys, and students, this companion to Government Institutes' best-selling ``Environmental Law Handbook'' offers the legal fundamentals behind occupational safety and health laws in one concise and authoritative volume. In 19 chapters, the authoring law firm of Keller and Heckman cover the OSHAct and its development; OSHA, NIOSH, and OSHRC; the roles played by other regulatory agencies; the OSHA rulemaking process; OSHA Standards and the General Duty Clause; record keeping and reporting; employers' and employees' rights; inspections; violations, penalties, and how to contest them; criminal prosecutions; state plans; industry-specific issues; OSHA reform; and international regulations and standards. This book references approximately 400 seminal OSHA legal decisions from the approximately 1,300 cases on record and includes coverage of Canadian and European Community regulations, making it the first comprehensive global overview of occupational safety and health law.

  20. Software for the IAEA Occupational Radiation Protection Standards

    International Nuclear Information System (INIS)

    Mocaun, N.M.; Paul, F.; Griffith, R.V.; Gustafsson, M.; Webb, G.A.M.; Enache, A.

    2000-01-01

    The software version of International Basic Safety Standards (BSS) for Protection against Ionizing Radiation and for the Safety of Radiation Sources, jointly sponsored by Food and Agriculture Organization of the United Nations, International Atomic Energy Agency, International Labour Organization, Nuclear Energy Agency of the Organization for Economic Co-operation and Development, Pan American Health Organization and World Health Organization, was issued on diskette (SS115 software version) by IAEA in 1997. This Windows based software was written in Visual Basic and is designed to provide the user with a powerful and flexible retrieval system to access the 364 page BSS. The code enables the user to search the BSS, including 22 tables and 254 topics, directly through the 'contents' tree. Access is based on keywords, subjects index or cross referencing between portions of the document dealing with different aspects of the same issue or concept. Definitions of important terms used in the Standards can be found by accessing the Glossary. Text and data can be extracted using familiar copy, paste and print features. Publication of three Safety Guides on Occupational Radiation Protection, with co-sponsorship of the IAEA and International Labour Office, is planned for the second half of 1999. The same system will be used to provide these on diskette or CD-ROM (ORPGUIDE version 4.1). The new software will include the Safety Guides: Occupational Radiation Protection, Assessment of Occupational Exposure due to Intakes of Radionuclides, and Assessment of Occupational Exposure due to External Sources of Radiation, as well as the Bss and the Safety Fundamentals, Radiation Protection and the Safety of Radiation Sources. The capabilities of the new software have been expanded to include free form text search and cross referencing of the five documents which will comprise the guidance of the IAEA and its co-sponsors on Occupational Radiation Protection. It is envisioned that the

  1. 75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2010-05-11

    ... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...

  2. 29 CFR 1925.2 - Safety and health standards.

    Science.gov (United States)

    2010-07-01

    .... Every contractor and subcontractor shall comply with the safety and health standards published in 41 CFR... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

  3. Oswer integrated health and safety standard operating practices. Directive

    International Nuclear Information System (INIS)

    1993-02-01

    The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

  4. Safety standards and safety record of nuclear power plants

    International Nuclear Information System (INIS)

    Davis, A.B.

    1984-01-01

    This paper focuses on the use of standards and the measurement and enforcement of these standards to achieve safe operation of nuclear power plants. Since a discussion of the safety standards that the Nuclear Regulatory Commission (NRC) uses to regulate the nuclear power industry can be a rather tedious subject, this discussion will provide you with not only a description of what safety standards are, but some examples of their application, and various indicators that provide an overall perspective on safety. These remarks are confined to the safety standards adopted by the NRC. There are other agencies such as the Environmental Protection Agency, the Occupational Safety and Health Administration, and the state regulatory agencies which impact on a nuclear power plant. The NRC has regulatory authority for the commercial use of the nuclear materials and facilities which are defined in the Atomic Energy Act of 1954 to assure that the public health and safety and national security are protected

  5. Occupational safety motivation

    DEFF Research Database (Denmark)

    Pedersen, Louise; Kines, Pete

    2010-01-01

    Background: Motivation is one of the most important factors for safety behaviour and for implementing change in general. However, theoretical and psychometric studies of safety performance have traditionally treated safety motivation, safety compliance and safety participation unidimensionally....... At the same time many motivation questionnaire items are seldom founded on theory and/or do not account for the theories’ ontological and epistemological differences, e.g. of how knowledge, attitude and action are related. Present questionnaire items tap into occupational safety motivation in asking whether...... or not respondents ‘are’ motivated and whether they feel that safety is important or worthwhile. Another important aspect is ‘what’ motivates workers to comply to and participate in safety. The aim of this article is to introduce a new theory-based occupational safety motivation scale which is validated...

  6. Framework for Continuous Assessment and Improvement of Occupational Health and Safety Issues in Construction Companies

    OpenAIRE

    Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

    2014-01-01

    Background: Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Methods: Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined fo...

  7. OSHA Laboratory Standard: Driving Force for Laboratory Safety!

    Science.gov (United States)

    Roy, Kenneth R.

    2000-01-01

    Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

  8. 29 CFR 1926.2 - Variances from safety and health standards.

    Science.gov (United States)

    2010-07-01

    ... from safety and health standards. (a) Variances from standards which are, or may be, published in this... 29 Labor 8 2010-07-01 2010-07-01 false Variances from safety and health standards. 1926.2 Section 1926.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

  9. The President's Report on Occupational Safety and Health.

    Science.gov (United States)

    Department of Health, Education, and Welfare, Washington, DC.

    This report describes what has been done to implement the Occupational Safety and Health Act of 1970 during its first year of operation. The report examines the responsibilities of the Department of Labor for setting safety and health standards and also explores the activities of the Department of Health, Education, and Welfare in research and…

  10. CONFORMITY TO OCCUPATIONAL SAFETY AND HEALTH REGULATIONS IN MALAYSIAN SMALL AND MEDIUM ENTERPRISES

    OpenAIRE

    Baba Md Deros; Ahmad Rasdan Ismail; Jaharah A. Ghani; Mohd Yusri Mohd Yusof

    2014-01-01

    Regulation on occupational safety and health in Malaysia had evolved from the prescriptive factory and machinery act to a self-regulated occupational safety and health act. However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by Small and Medium Enterprises (SMEs). The two main objectives of this study are: First, first, to identify and determine the level of conformity and second...

  11. Occupational safety in the petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Elsner, W

    1987-03-01

    The original technique-oriented accident prevention today has grown to a comprehensive occupational workers protection system. Modern occupational safety requires latest strategies. Side by side with technical and organizational measures we see duties for all superiors directed to plant related occupational safety. These new principles of leadership on the basis of occupational safety policies from top management require equivalent tactics to cause change in behaviour of the employees. Such a not only formulated but also accepted safety strategy is extremely clear by its positive results in the petroleum industry.

  12. Occupational Safety and Health Administration

    Science.gov (United States)

    ... Twitter Instagram RSS Subscribe Occupational Safety and Health Administration English | Spanish MENU OSHA English | Spanish Search A ... STATES DEPARTMENT OF LABOR Occupational Safety and Health Administration 200 Constitution Ave., NW, Washington, DC 20210 800- ...

  13. Occupational safety and health management among five ASEAN countries: Thailand, Indonesia, Malaysia, Philippines, and Singapore.

    Science.gov (United States)

    Buranatrevedh, Surasak

    2015-03-01

    Occupational safety and health is one of important issues for workforce movement among ASEAN countries. The objective was to study laws, main agencies, and law enforcement regarding occupational safety and health in Thailand, Indonesia, Malaysia, Philippines, and Singapore. This documentary research covered laws, main agencies' duties, and occupational safety and health law enforcement in Thailand, Indonesia, Malaysia, Philippines, and Singapore. Thailand has its Occupational Safety, Health, and Work EnvironmentAct 2011. Its main agency was Department of Labor Protection and Welfare. Indonesia had WorkSafety Act (Law No. 1, 1970). Its main agency was Department of Manpower and Transmigration. Malaysia had Occupational Safety and Health Act (OSHA) 1994. Its main agency is the Department of Occupational Safety and Health. The Philippines has its Occupational Safety and Health Standards. Its main agency was Department ofLabor and Employment. Singapore has its Workplace Safety and Health Act 2006. Its main agency is Occupational Safety and Health Division. Occupational safety and health law enforcement among each county covers work environment surveillance, workers' health surveillance, advice about prevention and control of occupational health hazards, training and education of employers and employees, data systems, and research. Further in-depth surveys of occupational safety and health among each ASEAN county are needed to develop frameworks for occupational safety and health management for all ASEAN countries.

  14. Comparing non-safety with safety device sharps injury incidence data from two different occupational surveillance systems.

    Science.gov (United States)

    Mitchell, A H; Parker, G B; Kanamori, H; Rutala, W A; Weber, D J

    2017-06-01

    The United States Occupational Safety and Health Administration (OSHA) Bloodborne Pathogens Standard as amended by the Needlestick Safety and Prevention Act requiring the use of safety-engineered medical devices to prevent needlesticks and sharps injuries has been in place since 2001. Injury changes over time include differences between those from non-safety compared with safety-engineered medical devices. This research compares two US occupational incident surveillance systems to determine whether these data can be generalized to other facilities and other countries either with legislation in place or considering developing national policies for the prevention of sharps injuries among healthcare personnel. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  15. Study on occupational safety and health strategy for Taiwan.

    Science.gov (United States)

    Chuang, Kuen-Yuan; Su, Teh-Sheng; Kuo, Chao-Yin; Lin, Chien-Liang; Lin, Han-Yu; Yu, Yi-Chun

    2009-12-01

    The aim of this study was to establish a set of occupational safety and health (OSH) issues and development policies suitable for adoption in Taiwan. A survey was conducted on a sample of 102 experts and 235 industrial work safety personnel in Taiwan for statistical analysis of the general consensus, with the results showing such consensus in 104 individual policy indicators. Our results reveal that the most appropriate targets were considered to be annual 10% reductions in the 'occupational accident disability rate', 'occupational accident injury rate' and 'occupational diseases before 2010'. Responding to the specific question of the appropriate method of achieving a reduction in the number of accidents in Taiwan, the primary consideration for 13.4% of the experts and 10.6% of the industry personnel was 'promoting OSH awareness and enhancing the overall safety culture'. As regards the current OSH policy focus, 11.2% of the experts considered 'improving OSH legislation, standards and systems' to be the most important, whilst 8.9% of the industry personnel felt that 'recognizing work stress, overwork and emerging OSH issues' were the most important.

  16. Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

    Science.gov (United States)

    Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

    2018-04-26

    This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

  17. Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

    2016-03-01

    The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p safety facilities and equipment (r = -0.32, p safety procedure (r = -0.27, p safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

  18. Occupational Safety and Health Management System (OSHMS)

    International Nuclear Information System (INIS)

    Shyen, A.K.S.; Mohd Khairul Hakimin; Manisah Saedon

    2011-01-01

    Safe work environment has always been one of the major concerns at workplace. For this, Occupational Safety and Health Act 1994 has been promulgated for all workplaces to ensure the Safety, Health and Welfare of its employees and any person at workplaces. Malaysian Nuclear Agency therefore has started the initiative to review and improve the current Occupational Safety and Health Management System (OSHMS) by going for OHSAS 18001:2007 and MS 1722 standards certification. This would also help in our preparation to bid as the TSO (Technical Support Organization) for the NPP (Nuclear Power Plant) when it is established. With a developed and well maintained OSHMS, it helps to create a safe working condition and thus enhancing the productivity, quality and good morale. Ultimately, this will lead to a greater organization profit. However, successful OSHMS requires full commitment and support from all level of the organization to work hand in hand in implementing the safety and health policy. Therefore it is essential for all to acknowledge the progress of the implementation and be part of it. (author)

  19. [Associations of occupational safety atmosphere and behaviors with unintentional injuries].

    Science.gov (United States)

    Xiao, Ya-ni; Huang, Zhi-xiong; Huang, Shao-bin; Cao, Xiao-ou; Chen, Xia-ming; Liu, Xu-hua; Chen, Wei-qing

    2012-07-01

    To evaluate the associations of perception of safety atmosphere at workplace, occupational safety attitude and behaviors with occupational unintentional injury among manufacturing workers. A cross-sectional study was performed and a self-administered questionnaire was used to inquire socio-demographic characteristics, perceived safety atmosphere, occupational safety attitudes, occupational safety behaviors and occupational unintentional injuries among 10585 manufacturing workers selected from 46 enterprises in Guangdong. Structural equation modeling was applied to assess the relationship of the perception of safety atmosphere at workplace, occupational safety attitude, and occupational safety behaviors with occupational unintentional injury. Among 24 pathways supposed in structural equation model, 20 pathways (except for the attitude toward occupational safety, the attitude toward managers' support, the work posture and individual protection) were significantly related to the occupational unintentional injuries. The further analysis indicated that the perceived safety atmosphere might impact the occupational unintentional injuries by the attitude toward occupational safety and occupational safety behaviors. Workers' perception of safety atmosphere indirectly influenced on occupational unintentional injuries through occupational safety attitudes and occupational safety behaviors.

  20. 78 FR 70415 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

    Science.gov (United States)

    2013-11-25

    ... single event, due in part to the high occupancy rate of the vehicles, the speed at which they travel, and..., ``NHTSA's Approach to Motorcoach Safety.'' \\2\\ In the plan, the term ``motorcoach'' referred to intercity... the first priority area of the NHTSA plan, to minimize intercity bus passenger and driver ejection by...

  1. Regulatory system reform of occupational health and safety in China.

    Science.gov (United States)

    Wu, Fenghong; Chi, Yan

    2015-01-01

    With the explosive economic growth and social development, China's regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined.

  2. Zagazig Journal of Occupational Health and Safety

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and environmental health and safety. The field is devoted to the diagnosis, prevention, management and scientific analysis of occupational , environmental and safety health problems; ...

  3. Areva - Occupational Health and Safety. Policy 2014-2016

    International Nuclear Information System (INIS)

    2014-09-01

    Areva is a world leader in nuclear power. The group's offer to utilities covers every stage of the nuclear fuel cycle, reactor design and construction, and operating services. Its expertise and uncompromising dedication to safety make it a leading industry player. Areva also invests in renewable energies to develop, via partnerships, high technology solutions. Through the complementary nature of nuclear and renewables, Areva's 45,000 employees contribute to building tomorrow's energy model: supplying the greatest number of people with energy that is safer and with less CO 2 . Areva promotes the highest standards for Nuclear and Occupational Safety toward its customers and aims at being exemplary in this field everywhere in the world. The first pillar of the 'Action 2016' strategic action plan states that Nuclear and Occupational Safety are Areva's absolute priorities

  4. 78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2013-10-29

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

  5. Analysis of third-party certification approaches using an occupational health and safety conformity-assessment model.

    Science.gov (United States)

    Redinger, C F; Levine, S P

    1998-11-01

    The occupational health and safety conformity-assessment model presented in this article was developed (1) to analyze 22 public and private programs to determine the extent to which these programs use third parties in conformity-assessment determinations, and (2) to establish a framework to guide future policy developments related to the use of third parties in occupational health and safety conformity-assessment activities. The units of analysis for this study included select Occupational Safety and Health Administration programs and standards, International Organization for Standardization-based standards and guidelines, and standards and guidelines developed by nongovernmental bodies. The model is based on a 15-cell matrix that categorizes first-, second-, and third-party activities in terms of assessment, accreditation, and accreditation-recognition activities. The third-party component of the model has three categories: industrial hygiene/safety testing and sampling; product, equipment, and laboratory certification; and, occupational health and safety management system registration/certification. Using the model, 16 of the 22 programs were found to have a third-party component in their conformity-assessment structure. The analysis revealed that (1) the model provides a useful means to describe and analyze various third-party approaches, (2) the model needs modification to capture aspects of traditional governmental conformity-assessment/enforcement activities, and (3) several existing third-party conformity-assessment systems offer robust models that can guide future third-party policy formulation and implementation activities.

  6. 78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

    Science.gov (United States)

    2013-08-27

    ... air quality issues; food/beverage carts; and ergonomics. OSHA's noise, bloodborne pathogens, and... exposure, cabin air quality, food and beverage cart and ergonomic issues are not being considered at this... comments from the National Institute for Occupational Safety and Health that cited several studies it...

  7. Regulatory system reform of occupational health and safety in China

    Science.gov (United States)

    WU, Fenghong; CHI, Yan

    2015-01-01

    With the explosive economic growth and social development, China’s regulatory system of occupational health and safety now faces more and more challenges. This article reviews the history of regulatory system of occupational health and safety in China, as well as the current reform of this regulatory system in the country. Comprehensive, a range of laws, regulations and standards that promulgated by Chinese government, duties and responsibilities of the regulatory departments are described. Problems of current regulatory system, the ongoing adjustments and changes for modifying and improving regulatory system are discussed. The aim of reform and the incentives to drive forward more health and safety conditions in workplaces are also outlined. PMID:25843565

  8. Key elements on implementing an occupational health and safety management system using ISO 45001 standard

    Directory of Open Access Journals (Sweden)

    Darabont Doru Costin

    2017-01-01

    Full Text Available Occupational health and safety (OHS management system is one of the main elements of the company’s general management system. During last decade, Romanian companies gained a valuable experience on implementing this type of management systems, using OHSAS 18001 referential and standard. However, the projected release of the ISO 45001 represents a new approach which requires the companies to take in consideration new key elements for a successful implementation of the OHS management system. The aim of the paper is to identify and analyse these key elements, by integration of the following issues: standard requirements, Romanian OHS legislation and good practice examples, including the general control measures for new and emerging risks such as psycho-social risks, workforce ageing and new technologies. The study results represent an important work instrument for each company interested to implement or upgrade its OHS management system using ISO 45001 standard and could be used regardless the company size or activity domain.

  9. Principles and Practices of Occupational Safety and Health: Administrator's Manual.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    The manual guides an instructor in conducting a training course for first-line supervisors to familiarize them with six aspects relating to the Occupational Safety and Health Act of 1970: (1) requirements of the Act, (2) compliance with its standards, (3) identification of health and safety hazards, (4) correction of adverse conditions, (5) record…

  10. Occupational Safety and Health Curriculum Manual.

    Science.gov (United States)

    Gourley, Frank A., Jr., Comp.

    With the enactment of the Occupational Safety and Health Act of 1970, the need for manpower development in the field of industrial safety and hygiene has resulted in the development of a broad based program in Occupational Safety and Health. The manual provides information to administrators and instructors on a program of study in this field for…

  11. National Institute for Occupational Safety and Health

    Science.gov (United States)

    ... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... and Events NIOSH Contact Information Related Federal Agencies Occupational Safety and Health Administration Mine Safety and Health Administration Follow NIOSH ...

  12. Occupational safety and health textbook for radiological personnel employed in structural material testing

    International Nuclear Information System (INIS)

    Abraham, J.

    1981-01-01

    The comprehensive textbook for X-ray and radiological testing personnel includes requirements and rules of occupational safety and health on the basis of Hungarian and international (mainly German) literature. In the chapter Fundamentals, X-ray and radioactive radiations, their measurements and biological effects, doses etc are described. In the chapter Occupational safety and health, the jobs representing radiation hazards are listed and safety regulations for them are reported. Finally, information for prevention and first aid is presented. Control questions are added to each part. The Appendix contains safety standards and regulations, information on legal aspects of safety and radiation protection as well as recommendations. (Sz.J.)

  13. Occupational safety meets radiation protection

    International Nuclear Information System (INIS)

    Severitt, S.; Oehm, J.; Sobetzko, T.; Kloth, M.

    2012-01-01

    The cooperation circle ''Synergies in operational Security'' is a joint working group of the Association of German Safety Engineers (VDSI) and the German-Swiss Professional Association for Radiation Protection (FS). The tasks of the KKSyS are arising from the written agreement of the two associations. This includes work on technical issues. In this regard, the KKSyS currently is dealing with the description of the interface Occupational Safety / Radiation Protection. ''Ignorance is no defense'' - the KKSyS creates a brochure with the working title ''Occupational Safety meets radiation protection - practical guides for assessing the hazards of ionizing radiation.'' The target groups are entrepreneurs and by them instructed persons to carry out the hazard assessment. Our aim is to create practical guides, simple to understand. The practical guides should assist those, who have to decide, whether an existing hazard potential through ionizing radiation requires special radiation protection measures or whether the usual measures of occupational safety are sufficient. (orig.)

  14. Occupational Safety and Health Act Handbook for Vocational and Technical Education Teachers.

    Science.gov (United States)

    Shashack, Willard F., Ed.

    The purpose of the handbook is to assist the school shop teacher in participating in voluntary compliance with the standards and regulations of the Occupational Safety and Health Act of 1970. The first major section deals with general shop safety and how the shop teacher can use the checklist to control possible safety violations in his shop. The…

  15. Occupational radiation exposure in international recommendations on radiation protection: Basic standards under review

    International Nuclear Information System (INIS)

    Kraus, W.

    1996-01-01

    The ICRP publication 60 contains a number of new recommendations on the radiological protection of occupationally exposed persons. The recommendations have been incorporated to a very large extent in the BSS, the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, a publication elaborated by the IAEA in cooperation with many other international organisations, and in the Euratom Basic Safety Standards (EUR) to be published soon. However, there exist some considerable discrepancies in some aspects of the three publications. The ICRP committee has set up a task group for defining four general principles of occupational radiation protection, and a safety guide is in preparation under the responsibility of the IAEA. ''StrahlenschutzPraxis'' will deal with this subject in greater detail after publication of these two important international publications. The article in hand discusses some essential aspects of the recommendations published so far. (orig.) [de

  16. Towards servitization in the management of occupational safety

    Directory of Open Access Journals (Sweden)

    Jasmina Berbegal

    2014-04-01

    Full Text Available Purpose: This article aims to examine the relationship between occupational accidents and the type of occupational safety resources that the company implements. Design/methodology/approach: Using a sample of 4750 firms gathered from the National Survey of Safety Management and Health Enterprises (ENGE for 2009, we first carried out a descriptive analysis of the data, and second we run an empirical analysis based on logistic and Tobit regressions. Findings and Originality/value: The results allow us to identify which companies and what kind of preventive activities are usually outsourced to an external firm specialized at providing occupational safety services. Second, the empirical analysis shows that outsourcing part of occupational safety activities also helps reduce the index of workplace accidents. Research limitations/implications: The present case focuses on Spanish companies and for a particular period (years 2007 and 2008. Because each country has specific regulations regarding the implementation of occupational safety services, the conclusions cannot be directly extrapolated to other countries. Practical implications: The results obtained are hoped to assist companies in choosing those prevention services that best suits their needs. Furthermore, this study is expected to contribute to the current debate on the design of prevention policies by public authorities, encouraging the outsourcing of occupational safety services as a way to take advantage of their expertise and reduce the number of accidents. Originality/value: Most of the academic literature on occupational safety has ignored the study of the impact that prevention services have on the firm’s performance, in terms of occupational accidents. This article contributes to filling this gap by demonstrating that the servitization trend is also impacting in the field of occupational safety.

  17. 78 FR 54923 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2013-09-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  18. National Standard for Limiting Occupational Exposure to Ionizing Radiation. NOHSC:1013(1995)

    International Nuclear Information System (INIS)

    1995-06-01

    The objectives of The National Standard for Limiting Occupational Exposure to Ionizing Radiation are to limit the risk to health arising from exposure to ionizing radiation in the workplace and to optimize radiation protection by setting common essential requirements for the control of exposure to radiation, including the specification of employer duties and employee duties. It serves to identify the provisions which are to be made in the regulations of States, Territories and the Commonwealth for the control of occupational exposure to radiation. It is recognised that legislation, including regulations, may already exist which covers all or part of the scope of this Standard. It is also recognised that it may not be appropriate to take up this Standard verbatim because of differing legislative frameworks and drafting conventions in each State and Territory and in the Commonwealth. However, it is expected that the implementation of the provisions contained in this Standard will be nationally consistent. This Standard deals only with occupational health and safety matters related to exposure to ionizing radiation; the appropriate authority should be consulted about other radiation control requirements which may apply. The complementary 'Recommendations for Limiting Exposure to Ionizing Radiation' - Guidance note NOHSC:3022(1995)- Radiation Health series no. 39 - describes the principles and practice on which this Standard is based and provides interpretive and reference material. It supersedes earlier recommendations of the NHMRC: Recommended Radiation Protection Standards for Individuals Exposed to Ionising Radiation, adopted in 1980, Australia's Radiation Protection Standards (1989) and the Interim on Australia's Radiation Protection Standards (1991). These revised Recommendations for application in Australia take into account the most recent recommendations of the ICRP, which were adopted after careful review of all available scientific evidence concerning the

  19. The OSHA hazardous chemical occupational exposure standard for laboratories.

    Science.gov (United States)

    Armbruster, D A

    1991-01-01

    OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

  20. Recent Cases: Administrative Law--Occupational Safety and Health Act

    Science.gov (United States)

    Harvard Law Review, 1976

    1976-01-01

    Implications of the Occupational Safety and Health Act of 1970 are described in two cases: Brennan v. Occupational Safety and Health Review Commission (Underhill Construction Corp.), and Anning-Johnson Co. v. United States Occupational Safety and Health Review Commission. (LBH)

  1. Assessment of occupational exposure due to intakes of radionuclides. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

  2. Assessment of occupational exposure due to intakes of radionuclides. Safety guide

    International Nuclear Information System (INIS)

    2000-01-01

    Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

  3. Assessment of occupational exposure due to intakes of radionuclides. Safety guide

    International Nuclear Information System (INIS)

    2001-01-01

    Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

  4. Assessment of occupational exposure due to intakes of radionuclides. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

  5. Assessment of occupational exposure due to intakes of radionuclides. Safety guide

    International Nuclear Information System (INIS)

    1999-01-01

    Occupational exposure due to radioactive materials can occur as a result of various human activities. These include work associated with the different stages of the nuclear fuel cycle, the use of radioactive sources in medicine, scientific research, agriculture and industry, and occupations which involve the handling of materials containing enhanced concentrations of naturally occurring radionuclides. In order to control this exposure, it is necessary to be able to assess the magnitude of the doses involved. Three interrelated Safety Guides, prepared jointly by the IAEA and the International Labour Office (ILO), provide guidance on the application of the requirements of the Basic Safety Standards with respect to occupational exposure. Reference [3] gives general advice on the exposure conditions for which monitoring programmes should be set up to assess radiation doses arising from external radiation and from intakes of radionuclides by workers. More specific guidance on the assessment of doses from external sources of radiation can be found in Ref. [4] and the present Safety Guide deals with intakes of radioactive materials. Recommendations related to occupational radiation protection have also been developed by the International Commission on Radiological Protection (ICRP) [5]. These and other current recommendations of the ICRP [6] have been taken into account in preparing this Safety Guide. The purpose of this Safety Guide is to provide guidance for regulatory authorities on conducting assessments of intakes of radioactive material arising from occupational exposure. This Guide will also be useful to those concerned with the planning, management and operation of occupational monitoring programmes, and to those involved in the design of equipment for use in internal dosimetry and workplace monitoring

  6. Occupational Therapy Home Safety Intervention via Telehealth

    Science.gov (United States)

    BREEDEN, LORI E.

    2016-01-01

    Photography can be an effective addition for education-based telehealth services delivered by an occupational therapist. In this study, photography was used as antecedent to telehealth sessions delivered by an occupational therapist focused on narrative learning about home safety. After taking photographs of past home safety challenges, six participants experienced three web-based occupational therapy sessions. Sessions were recorded and transcribed. Data were examined using content analysis. The content analysis identified the following themes: the value of photos to support learning; the value of narrative learning related to home safety education; and abstract versus concrete learners. Procedural findings are included to support future endeavors. Findings indicate that within a wellness context, home safety education for older adults can be delivered effectively via telehealth when using photography as a part of an occupational therapy intervention. PMID:27563389

  7. Fact Sheet: Revisions to the Occupational Safety and Health Administration Hazard Communication Standards (HCS)

    Science.gov (United States)

    On March 26, 2012, Occupational Safety and Health Administration (OSHA) modified its HCS to conform to the United Nations’ (UN) Globally Harmonized System of Classification and Labeling of Chemicals (GHS), to improve consistency and quality of information.

  8. Directory of Academic Programs in Occupational Safety and Health.

    Science.gov (United States)

    Weis, William J., III; And Others

    This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

  9. Stepping Up Occupational Safety and Health Through Employee Participation.

    Science.gov (United States)

    Vaughan, Gary R.

    1986-01-01

    The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

  10. Ageing and occupational safety (abstract)

    NARCIS (Netherlands)

    Venema, A.; Vroome, E.M.M. de

    2008-01-01

    Session 09: New work environment. The aim of this article is to look into the possible effects of an ageing workforce on occupational safety in the Netherlands, and to use this information to draw conclusions about effective age-related staff policy. The article analyzes data on occupational

  11. 76 FR 60535 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2011-09-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA--2011-0116] Federal Advisory Council on Occupational Safety and Health AGENCY: Occupational Safety and Health... the Federal Advisory Council on Occupational Safety and Health (FACOSH) until October 31, 2011. DATES...

  12. Occupational Therapy Home Safety Intervention via Telehealth

    OpenAIRE

    Lori E. Breeden

    2016-01-01

    Photography can be an effective addition for education-based telehealth services delivered by an occupational therapist.  In this study, photography was used as antecedent to telehealth sessions delivered by an occupational therapist focused on narrative learning about home safety.  After taking photographs of past home safety challenges, six participants experienced three web-based occupational therapy sessions each.  Sessions were recorded and transcribed.  Data were examined using content ...

  13. Occupational Therapy Home Safety Intervention via Telehealth

    Directory of Open Access Journals (Sweden)

    Lori E. Breeden

    2016-07-01

    Full Text Available Photography can be an effective addition for education-based telehealth services delivered by an occupational therapist.  In this study, photography was used as antecedent to telehealth sessions delivered by an occupational therapist focused on narrative learning about home safety.  After taking photographs of past home safety challenges, six participants experienced three web-based occupational therapy sessions each.  Sessions were recorded and transcribed.  Data were examined using content analysis.  A content analysis identified the following themes as well as an understanding of the learning process.  Analyses yielded themes of: the value of photos to support learning, the value of narrative learning related to home safety education, abstract versus concrete learners.  Procedural findings are included to support future endeavors.  Findings indicate that within a wellness context, home safety education for older adults can be delivered effectively via telehealth when using photography as a part of an occupational therapy intervention.

  14. 75 FR 52988 - National Advisory Committee on Occupational Safety and Health

    Science.gov (United States)

    2010-08-30

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health AGENCY: Occupational Safety and Health... Occupational Safety and Health (NACOSH) will meet September 14 and 15, 2010, in Washington, DC. In conjunction...

  15. 77 FR 39743 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-07-05

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0022] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  16. 76 FR 39902 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-07-07

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0116] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH). SUMMARY: The Assistant Secretary of Labor for Occupational Safety and...

  17. 32 CFR 989.27 - Occupational safety and health.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

  18. Work, obesity, and occupational safety and health.

    Science.gov (United States)

    Schulte, Paul A; Wagner, Gregory R; Ostry, Aleck; Blanciforti, Laura A; Cutlip, Robert G; Krajnak, Kristine M; Luster, Michael; Munson, Albert E; O'Callaghan, James P; Parks, Christine G; Simeonova, Petia P; Miller, Diane B

    2007-03-01

    There is increasing evidence that obesity and overweight may be related, in part, to adverse work conditions. In particular, the risk of obesity may increase in high-demand, low-control work environments, and for those who work long hours. In addition, obesity may modify the risk for vibration-induced injury and certain occupational musculoskeletal disorders. We hypothesized that obesity may also be a co-risk factor for the development of occupational asthma and cardiovascular disease that and it may modify the worker's response to occupational stress, immune response to chemical exposures, and risk of disease from occupational neurotoxins. We developed 5 conceptual models of the interrelationship of work, obesity, and occupational safety and health and highlighted the ethical, legal, and social issues related to fuller consideration of obesity's role in occupational health and safety.

  19. [Analysis of the current situation the oral medical interns' awareness on occupation safety behavior in college].

    Science.gov (United States)

    Hongyan, Song; Yu, Wang; Rongrong, He; Ying, Xu

    2015-04-01

    This study aims to determine the awareness oral medical interns about occupation safety protection of knowledge and to present a scientific basis for perfecting the occupation safety education system and standard protection behavior. A self-designed questionnaire that used a retrospective questionnaire survey on 425 stomatological interns, scoring, and statistical analysis of the survey were performed. The questionnaire included occupation safety prevention knowledge, behavior cognitive, and protective behavior, among others. The questionnaire recovery rate was 100%, and the average scores of the prevention knowledge and behavior cognitive were 4.55 ± 0.91 and 4.40 ± 1.05, respectively. More than 90% interns can conduct the conventional protection, and less than 40% can perform special protection. For the item "occupation safety protection knowledge", the scores of three grade III hospitals were higher than that of stomatological hospitals and second level of first-class hospitals; the difference was statistically significant (P safety protection knowledge, behavioral cognitive, and protection behavior. The average score was higher for than for boys in the three contents, and the average score of interns accepting pre-job training was higher than those rejected; the difference was statistically significant (P safety knowledge of oral medical interns is not sufficient, and the protective behavior is poor. Schools and hospitals should strengthen the intern occupation safety and protection education and improve the status of occupation safety behavior.

  20. 75 FR 28659 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH). SUMMARY: The National Advisory Committee on Occupational...

  1. 76 FR 54806 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2011-09-02

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0007] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and... Committee for Occupational Safety and Health (MACOSH) was established under Section 7 of the Occupational...

  2. OSHA Standard Time: Worker Safety Rules for Schools.

    Science.gov (United States)

    Smith, Sharon E.; Roy, Kenneth R.

    1994-01-01

    Briefly describes six of the Occupational Safety and Health Administration (OSHA) standards applicable to school districts. Provides a suggested approach for compliance and discusses how one district has begun to meet the challenge. The mandated OSHA programs concern the following: (1) hazard communication; (2) chemical hygiene; (3) bloodborne…

  3. Cross-index to DOE-prescribed occupational safety codes and standards

    International Nuclear Information System (INIS)

    1982-01-01

    A compilation of detailed information from more than three hundred and fifty DOE-prescribed or OSHA-referenced industrial safety codes and standards is presented. Condensed data from individual code portions are listed according to reference code, section, paragraph and page. A glossary of letter initials/abbreviations for the organizations or documents whose codes or standards are contained in this Cross-Index, is listed

  4. Examining occupational health and safety vulnerability among Canadian workers with disabilities.

    Science.gov (United States)

    Breslin, F Curtis; Lay, A Morgan; Jetha, Arif; Smith, Peter

    2017-05-26

    To compare workers with and without disabilities on their reported workplace hazard exposure and the presence of occupational health and safety vulnerability factors. Working-aged adults in Ontario or British Columbia were recruited to participate in a cross-sectional survey (n = 1988). Self-reported measures included demographic factors, work-related variables, perceived level of activity limitation at work, and presence of work safety vulnerability factors utilizing a novel framework. Reporting a disability at work was significantly associated with greater hazard exposure than those without a disability. In addition, those reporting a disability at work were more likely to be employed in conditions where hazard exposure was combined with inadequate policies and procedures, or hazard exposures were combined with inadequate empowerment. Work safety vulnerability is one way that health inequalities can be perpetuated even among those with disabilities who have found work. Our results suggest that employers and policy makers need to focus on assessing and addressing hazard exposures and targeting occupational health and safety resources in the workplace in a way that includes workers with disabilities. Implications for Rehabilitation Workers with disabilities experience greater hazard exposure than those without a disability. Those with moderate and severe disabilities reported occupational health and safety vulnerability, suggesting that workplace accommodations should be available to a broader range of disability levels. It appears that, above and beyond standard safety procedures, providing workplace accommodations for people with disabilities may further reduce their hazard exposure and improve their safety.

  5. Comparison of AIHA ISO 9001-based occupational health and safety management system guidance document with a manufacturer's occupational health and safety assessment instrument.

    Science.gov (United States)

    Dyjack, D T; Levine, S P; Holtshouser, J L; Schork, M A

    1998-06-01

    Numerous manufacturing and service organizations have integrated or are considering integration of their respective occupational health and safety management and audit systems into the International Organization for Standardization-based (ISO) audit-driven Quality Management Systems (ISO 9000) or Environmental Management Systems (ISO 14000) models. Companies considering one of these options will likely need to identify and evaluate several key factors before embarking on such efforts. The purpose of this article is to identify and address the key factors through a case study approach. Qualitative and quantitative comparisons of the key features of the American Industrial Hygiene Association ISO-9001 harmonized Occupational Health and Safety Management System with The Goodyear Tire & Rubber Co. management and audit system were conducted. The comparisons showed that the two management systems and their respective audit protocols, although structured differently, were not substantially statistically dissimilar in content. The authors recommend that future studies continue to evaluate the advantages and disadvantages of various audit protocols. Ideally, these studies would identify those audit outcome measures that can be reliably correlated with health and safety performance.

  6. Occupational Safety and Health Programs in Career Education.

    Science.gov (United States)

    DiCarlo, Robert D.; And Others

    This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

  7. 75 FR 44967 - National Institute for Occupational Safety and Health

    Science.gov (United States)

    2010-07-30

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... Occupational Safety and Health (NIOSH), 4676 Columbia Parkway, MS C-46, Cincinnati, OH 45226, Telephone 877-222...

  8. 77 FR 58488 - Hawaii State Plan for Occupational Safety and Health

    Science.gov (United States)

    2012-09-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1952 [Docket ID. OSHA 2012-0029] RIN 1218-AC78 Hawaii State Plan for Occupational Safety and Health AGENCY: Occupational... announces the Occupational Safety and Health Administration's (OSHA) decision to modify the Hawaii State...

  9. Workplace Safety and Health Topics: Industries and Occupations

    Science.gov (United States)

    ... Submit Search The CDC The National Institute for Occupational Safety and Health (NIOSH) Note: Javascript is disabled or is not ... September 6, 2017 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube ...

  10. 76 FR 32374 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-06-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH subgroups. SUMMARY: The National Advisory...

  11. 75 FR 2890 - OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting

    Science.gov (United States)

    2010-01-19

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0004] OSHA Listens: Occupational Safety and Health Administration Stakeholder Meeting AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: The Occupational Safety...

  12. 75 FR 78775 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-12-16

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH subgroup meetings. SUMMARY: The National...

  13. Status of Occupational Health and Safety and Related Challenges in Expanding Economy of Tanzania.

    Science.gov (United States)

    Mrema, Ezra J; Ngowi, Aiwerasia V; Mamuya, Simon H D

    2015-01-01

    Occupational health and safety is related with economic activities undertaken in the country. As the economic activities grow and expand, occupational injuries and diseases are more likely to increase among workers in different sectors of economy such as agriculture, mining, transport, and manufacture. This may result in high occupational health and safety services demand, which might be difficult to meet by developing countries that are prioritizing economic expansion without regard to their impact on occupational health and safety. To describe the status of occupational health and safety in Tanzania and outline the challenges in provision of occupational health services under the state of an expanding economy. Tanzania's economy is growing steadily, with growth being driven by communications, transport, financial intermediation, construction, mining, agriculture, and manufacturing. Along with this growth, hazards emanating from work in all sectors of the economy have increased and varied. The workers exposed to these hazards suffer from illness and injuries and yet they are not provided with adequate occupational health services. Services are scanty and limited to a few enterprises that can afford it. Existing laws and regulations are not comprehensive enough to cover the entire population. Implementation of legislation is weak and does not protect the workers. Most Tanzanians are not covered by the occupational health and safety law and do not access occupational health services. Thus an occupational health and safety services strategy, backed by legislations and provided with the necessary resources (competent experts, financial and technological resources), is a necessity in Tanzania. The existing legal provisions require major modifications to meet international requirements and standards. OHS regulations and legislations need refocusing, revision, and strengthening to cover all working population. Capacities should be improved through training and research

  14. 75 FR 28661 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2010-05-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Committee on Occupational Safety and Health (NACOSH). SUMMARY: The Assistant Secretary of Labor for...

  15. 76 FR 60085 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-09-28

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Assistant Secretary of Labor for Occupational Safety and Health requests nominations for membership on...

  16. 77 FR 46126 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-08-02

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and... Advisory Committee for Occupational Safety and Health. SUMMARY: OSHA invites interested persons to submit...

  17. 78 FR 21977 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2013-04-12

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Maritime Advisory Committee for Occupational Safety and Health. The Committee will better enable OSHA to...

  18. 76 FR 73689 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2011-11-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0065] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH Work Groups. SUMMARY: The National Advisory...

  19. 77 FR 64549 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-10-22

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and a NACOSH Work Group. SUMMARY: NACOSH will meet...

  20. 75 FR 35090 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2010-06-21

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... for Occupational Safety and Health (MACOSH or Committee) was established under Section 7 of the...

  1. 77 FR 43616 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-07-25

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Assistant Secretary of Labor for Occupational Safety and Health requests nominations for membership on...

  2. 77 FR 22358 - Occupational Safety and Health Administration

    Science.gov (United States)

    2012-04-13

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Preparations for the 23rd Session of the UN Sub-Committee of Experts on the Globally Harmonized System of Classification and...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of public meeting. SUMMARY: OSHA...

  3. Danger zone: Men, masculinity and occupational health and safety in high risk occupations.

    Science.gov (United States)

    Stergiou-Kita, Mary; Mansfield, Elizabeth; Bezo, Randy; Colantonio, Angela; Garritano, Enzo; Lafrance, Marc; Lewko, John; Mantis, Steve; Moody, Joel; Power, Nicole; Theberge, Nancy; Westwood, Eleanor; Travers, Krista

    2015-12-01

    The workplace is a key setting where gender issues and organizational structures may influence occupational health and safety practices. The enactment of dominant norms of masculinity in high risk occupations can be particularly problematic, as it exposes men to significant risks for injuries and fatalities. To encourage multi-disciplinary collaborations and advance knowledge in the intersecting areas of gender studies, men's health, work and workplace health and safety, a national network of thirteen researchers and health and safety stakeholders completed a critical literature review examining the intersection between masculinities and men's workplace health and safety in order to: (i) account for research previously undertaken in this area; (ii) identify themes that may inform our understanding of masculinity and workplace health and safety and; (iii) identify research and practice gaps in relation to men's workplace health and safety. In this paper we present key themes from this review. Recommendations are made regarding: (i) how to define gender; (ii) how to attend to and identify how masculinities may influence workers' identities, perceptions of occupational risks and how institutionalized practices can reinforce norms of masculinity; (iii) the importance of considering how masculinities may intersect with other variables (e.g. historical context, age, class, race, geographical location) and; (iv) the added significance of present-day labour market forces on men's occupational health and safety.

  4. 75 FR 62147 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2010-10-07

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0031] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Advisory Council on Occupational Safety and Health (FACOSH) will meet October 21, 2010, in Washington, DC...

  5. 77 FR 22355 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-04-13

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0006] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet May 3, 2012, in Washington...

  6. 76 FR 71077 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-11-16

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0192] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet Thursday, December 1, 2011...

  7. 77 FR 31398 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-05-25

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... on Occupational Safety and Health (NACOSH) and NACOSH Work Groups. SUMMARY: NACOSH will meet June 20...

  8. 77 FR 58174 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2012-09-19

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0006] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH) will meet October 18, 2012, in Washington, DC. DATES: FACOSH meeting...

  9. 77 FR 33495 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-06-06

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and..., Docket No. OSHA- 2012-0003, U.S. Department of Labor, Occupational Safety and Health Administration, Room...

  10. 76 FR 18798 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2011-04-05

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No OSHA-2011-0007] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and.... MACOSH will contribute to OSHA's performance of the duties imposed by the Occupational Safety and Health...

  11. 78 FR 68865 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2013-11-15

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Occupational Safety and Health (FACOSH) will meet December 5, 2013, in Washington, DC. DATES: FACOSH meeting...

  12. 78 FR 30337 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2013-05-22

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0013] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Federal Advisory Council on Occupational Safety and Health (FACOSH) will meet on June 6, 2013, in...

  13. 77 FR 5577 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2012-02-03

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0003] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and..., Docket No. OSHA- 2012-0003, U.S. Department of Labor, Occupational Safety and Health Administration, Room...

  14. 75 FR 13783 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

    Science.gov (United States)

    2010-03-23

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Health (MACOSH) was established under Section 7 of the Occupational Safety and Health (OSH) Act of 1970...

  15. 77 FR 40622 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2012-07-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH..., oxygen supply partnership, safety culture, occupational health and safety management systems, preventing...

  16. 76 FR 28816 - Federal Advisory Council on Occupational Safety and Health (FACOSH)

    Science.gov (United States)

    2011-05-18

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0061] Federal Advisory Council on Occupational Safety and Health (FACOSH) AGENCY: Occupational Safety and Health... Advisory Council on Occupational Safety and Health (FACOSH) will meet June 7, 2011, in Washington, DC. On...

  17. Zagazig Journal of Occupational Health and Safety: Editorial Policies

    African Journals Online (AJOL)

    Focus and Scope. Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and ... The main objectives of Zagazig Journal of Occupational Health and Safety are to publish high quality scientific articles , to maximize the citation rate of the ...

  18. 78 FR 30937 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2013-05-23

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0015] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... meeting is open to the public. Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act...

  19. 77 FR 62536 - National Advisory Committee on Occupational Safety and Health (NACOSH)

    Science.gov (United States)

    2012-10-15

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651, 656) to advise...

  20. Illinois Occupational Skill Standards: Mechanical Drafting Cluster.

    Science.gov (United States)

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the mechanical drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

  1. Illinois Occupational Skill Standards: Architectural Drafting Cluster.

    Science.gov (United States)

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    This document, which is intended as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the architectural drafting cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards and…

  2. Electronic Health Record in Occupational Medicine: Specific Aspects and Requirements of Data Structuring and Standardization

    Directory of Open Access Journals (Sweden)

    Dorin TRIFF

    2009-07-01

    Full Text Available The service of occupational medicine of a specific economic agent, as integrated part of the System of Labor Health and Safety, requires efficient, well-organized information management through standardized and computerized data processing and exploitation. Legal requirements and practical aspects of information management in occupational medicine trigger necessary operational modifications in the Electronic Health File. The goal of the paper is to present basic requirements of structuring the electronic health file and the necessary standards in recording specific data.

  3. OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

    Directory of Open Access Journals (Sweden)

    Artur Woźny

    2018-01-01

    Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

  4. Occupational Safety & Health. Inspectors' Opinions on Improving OSHA Effectiveness. Fact Sheet for Subcommittee on Health and Safety, Committee on Education and Labor, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Div. of Human Resources.

    Questionnaires gathered opinions of all Occupational Safety and Health Administration (OSHA) field supervisors and a randomly selected sample of one-third of the compliance officers about OSHA's approach to improving workplace safety and health. Major topics addressed were enforcement, safety and health standards, education and training, employer…

  5. Annual report on occupational safety 1985

    International Nuclear Information System (INIS)

    1986-09-01

    This report presents information on occupational safety relating to the Company's employees for the year 1985, and compares data with figures for the previous year. The following headings are listed: principle activities of BNFL, general policy and organisation, radiological safety, including whole body, skin and extremity, and internal organ doses, non-radiological safety, incidents reportable to the health and safety executive. (U.K.)

  6. MATHEMATICAL APPARATUS FOR KNOWLEDGE BASE PROJECT MANAGEMENT OF OCCUPATIONAL SAFETY

    Directory of Open Access Journals (Sweden)

    Валентина Николаевна ПУРИЧ

    2015-05-01

    Full Text Available The occupational safety project (OSP management is aimed onto a rational choice implementation. With respect to the subjectivity of management goals the project selection is considered as a minimum formalization level information process, The proposed project selection model relies upon the enterprise’s occupational and industrial safety assessment using fuzzy logic and linguistic variables based on occupational safety knowledge base.

  7. [Criteria for the assessment of the noise-induced occupational hearing loss: international and national standards].

    Science.gov (United States)

    Izmerov, N F; Denisov, É I; Adeninskaia, E E; Gorblianskiĭ, Iu Iu

    2014-01-01

    The objective of the present paper was to review international and national standards for the criteria of assessment of the noise-induced occupational loss of hearing. The importance of healthy hearing for the occupational safety is emphasized which implies the necessity of the more rigorous criteria for hearing conservation in the workers engaged in the noisy technological environment compared with those for the general population. A rationale for the development of the standard program of hearing conservation in the workers engaged in the noisy technological environment is proposed including hygienic norms and rules or national state standards.

  8. Safety Climate and Occupational Stress According to Occupational Accidents Experience and Employment Type in Shipbuilding Industry of Korea.

    Science.gov (United States)

    Kim, Kyung Woo; Park, Sung Jin; Lim, Hae Sun; Cho, Hm Hak

    2017-09-01

    Safety climate and occupational stress are related with occupational accident. The present study tried to identify the differences in safety climate and occupational stress according to occupational accidents experience and employment type (e.g., direct workers and subcontract workers). In this study, we conducted a survey using safety climate scale and Korean Occupational Stress Scale and classified the participants into four groups: direct workers working for accident-free departments, direct workers working for accident departments, subcontract workers working for accident-free departments, and subcontract workers working for accident departments for 2 years within the same workplace in the shipbuilding industry. The direct workers and subcontract workers showed diverse results in subscales of safety climate and occupational stress. This result is supported by existing studies; however, further study is necessary for more supporting evidence and elaborative methodological approach. The necessity of management for safety climate and psychosocial factor such as occupational stress for both direct workers and subcontract workers as a whole is suggested by this study.

  9. Occupational Safety and Health in Venezuela.

    Science.gov (United States)

    Caraballo-Arias, Yohama

    2015-01-01

    Venezuela has pioneered a preventive-focused and comprehensive movement for Occupational Safety and Health (OSH) in Latin America. However, despite being an oil-rich country, it has some of the lowest salaries for their workers and highest levels of hyperinflation, devaluation, crime, and violence of the world. Review the current status and challenges on relevant aspects of OSH in Venezuela. Review of literature and documents from national governments, UN agencies, NGOs, and the Venezuelan government concerning OSH and related topics since 1986. Reformed in 2005, the Organic Law on Prevention, Conditions and Environment (LOPCYMAT) was a fundamental moment of change for OSH. Factors which have impacted OSH the strongest are (i) the creation of the National Institute of Occupational Safety and Health (INPSASEL) and (ii) the socioeconomic crisis Venezuela is going through. Venezuela's laws are innovative and yet non-compliance is enormous. Almost half of the population works in the informal sector. Following the International Labor Office projections, 5 people die per day in Venezuela due to occupational accidents or diseases, making health and safety at work a luxury rather than a right. The quality of life for the average worker has deteriorated, affecting not only health but the overall well-being of all Venezuelans. The political and socio-economic situation has led to a mass exodus of more than 1.6 million highly qualified and talented professionals. Many statistics concerning OSH are not updated and are unreliable regarding occupational accidents and diseases. There is a substantial difference between what is written to protect individual Venezuelans in the workplace and the reality of workplace conditions. Substantial governmental actions are needed in the immediate future to improve occupational safety and health of Venezuelan workers. Copyright © 2015 The Author. Published by Elsevier Inc. All rights reserved.

  10. [B-BS and occupational health and safety management systems: the SGSL certification].

    Science.gov (United States)

    Calabrese, G; Candura, G

    2010-01-01

    The social costs deriving from the lack of occupational safety, which nowadays constitute approximately 2.8% of the GDP, tend not to come down despite the regulations, the inspections and the sanctions. The problems may be ascribed both to a shortage of systemic actions and to inappropriate training of the workers. Possible solutions are represented by the adoption of organizational models (D. Lgs. 81 art. 30) and by the implementation of protocols such as the Behavior-Based Safety (B-BS). Organisational and Management Models have been introduced with art. 30 D.Lgs. 81/2008 and with art. 6 D.Lgs. 231/2001. The comparison between their requisites and the ones specified by the OHSAS 18001 standards, confirms the partial overlapping of the Organizational Models with the Occupational Health & Safety Management Systems. Nevertheless such Systems are rarely adopted by Italian companies and their implementation still doesn't grant complete effectiveness. The B-BS protocol is proving to be a tool of extraordinary value to increase the level of safety, especially when used along with the known Health & Safety Management Systems.

  11. 29 CFR 1960.11 - Evaluation of occupational safety and health performance.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Evaluation of occupational safety and health performance. 1960.11 Section 1960.11 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.11 Evaluation of occupational safety and...

  12. Living up to safety values in health care : The effect of leader behavioral integrity on occupational safety

    NARCIS (Netherlands)

    Halbesleben, J.R.; Leroy, H.; Dierynck, B.; Simons, T.; Savage, G.T.; McCaughey, D.; Leon, M.R.

    2013-01-01

    While previous research has identified that leaders’ safety expectations and safety actions are important in fostering occupational safety, research has yet to demonstrate the importance of leader alignment between safety expectations and actions for improving occupational safety. We build on safety

  13. 78 FR 24751 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2013-04-26

    ... 14, 2013 (Closed) Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... business and for the study section to consider safety and occupational health-related grant applications...

  14. 29 CFR 1960.35 - National Institute for Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false National Institute for Occupational Safety and Health. 1960.35 Section 1960.35 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... § 1960.35 National Institute for Occupational Safety and Health. (a) The Director of the National...

  15. 29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

    Science.gov (United States)

    2010-07-01

    ... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

  16. Hawaii State Plan for Occupational Safety and Health. Final rule.

    Science.gov (United States)

    2012-09-21

    This document announces the Occupational Safety and Health Administration's (OSHA) decision to modify the Hawaii State Plan's ``final approval'' determination under Section 18(e) of the Occupational Safety and Health Act (the Act) and to transition to ``initial approval'' status. OSHA is reinstating concurrent federal enforcement authority over occupational safety and health issues in the private sector, which have been solely covered by the Hawaii State Plan since 1984.

  17. Status of occupational health and safety in Iran.

    Science.gov (United States)

    Vigeh, Mohsen; Mazaheri, Maria; Seyedaghamiri, Zahrabigom

    2011-12-01

    In recent decades, Iran has had a steadily growing economy with an annual rate of 6% on average. The country's economy is dominantly influenced by oil and natural gas production and related industries like petrochemicals and fertilizers. There are two million job units and sixteen million employees. The occupational health and safety (OHS) system is mainly regulated by two bodies: the Ministry of Health and Medical Education, responsible for occupational health services and legislations; and the Ministry of Labour and Social Affairs, which undertakes the enactment and enforcement of occupational safety legal issues. Inspectorates in each ministry carry out regular health and safety monitoring according to the OHS legislations. The most common occupational health disorders are musculoskeletal problems, respiratory diseases, noise induced hearing loss, and occupational injuries. Because the OHS is a complex system with overlapping responsibilities among the co-responders, its improvement needs well-organized collaboration among Iranian universities, industries, and governmental agencies, and reliable basic data. The present study takes a glance at the situation and activities of the Iranian OHS system.

  18. A Survey of Occupational Safety & Health Libraries in the United States.

    Science.gov (United States)

    Jensen, Karen S.

    There is very little published information available about occupational safety and health libraries. This study identified, described, and compared the occupational safety and health libraries in the United States. The questionnaire first filtered out those libraries that did not fit the definition of an occupational safety and health library;…

  19. Knowledge, Attitude and Practice of Healthcare Managers to Medical Waste Management and Occupational Safety Practices: Findings from Southeast Nigeria.

    Science.gov (United States)

    Anozie, Okechukwu Bonaventure; Lawani, Lucky Osaheni; Eze, Justus Ndulue; Mamah, Emmanuel Johnbosco; Onoh, Robinson Chukwudi; Ogah, Emeka Onwe; Umezurike, Daniel Akuma; Anozie, Rita Onyinyechi

    2017-03-01

    Awareness of appropriate waste management procedures and occupational safety measures is fundamental to achieving a safe work environment, and ensuring patient and staff safety. This study was conducted to assess the attitude of healthcare managers to medical waste management and occupational safety practices. This was a cross-sectional study conducted among 54 hospital administrators in Ebonyi state. Semi-structured questionnaires were used for qualitative data collection and analyzed with SPSS statistics for windows (2011), version 20.0 statistical software (Armonk, NY: IBM Corp). Two-fifth (40%) of healthcare managers had received training on medical waste management and occupational safety. Standard operating procedure of waste disposal was practiced by only one hospital (1.9%), while 98.1% (53/54) practiced indiscriminate waste disposal. Injection safety boxes were widely available in all health facilities, nevertheless, the use of incinerators and waste treatment was practiced by 1.9% (1/54) facility. However, 40.7% (22/54) and 59.3% (32/54) of respondents trained their staff and organize safety orientation courses respectively. Staff insurance cover was offered by just one hospital (1.9%), while none of the hospitals had compensation package for occupational hazard victims. Over half (55.6%; 30/54) of the respondents provided both personal protective equipment and post exposure prophylaxis for HIV. There was high level of non-compliance to standard medical waste management procedures, and lack of training on occupational safety measures. Relevant regulating agencies should step up efforts at monitoring and regulation of healthcare activities and ensure staff training on safe handling and disposal of hospital waste.

  20. eLCOSH : Electronic Library of Construction Occupational Safety and Health

    Science.gov (United States)

    Occupational Safety & Health Administration (OSHA) about Preventing Hearing Loss Caused by Chemical 2006 that drew attention to the safety of miners, hazard detecti... OSHA Safety and Health Information , 199... CDC study of occupational respiratory health analyzes rates of worker deaths from asthma by

  1. 75 FR 56549 - National Institute for Occupational Safety and Health (NIOSH), Safety and Occupational Health...

    Science.gov (United States)

    2010-09-16

    ... Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia, 22314, Telephone (703) 684-5900, Fax (703) 684... conduct of Study Section business and for the study section to consider safety and occupational health...

  2. Occupational Safety and Health in Peru.

    Science.gov (United States)

    Cruz, Ismael; Huerta-Mercado, Raul

    2015-01-01

    Peru is a country located on the Pacific coast of South America with a population of more than 30 million inhabitants. In the past 10 years, Peru has had a steady economic growth. Peru is predominantly an extractive industry country, but the manufacturing and construction sectors are booming. It is in this context that regulations have been implemented to protect the safety and health of workers. One of the most important regulations is the Law on Safety and Health at Work, which has been recently promulgated. Regulations are complemented by training and education in occupational safety and health. The measures are yet to be fully implemented thus a positive effect in reducing accidents and occupational diseases at work has not yet been seen. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  3. Annual report on occupational safety 1989

    International Nuclear Information System (INIS)

    1990-01-01

    This report presents detailed information on occupational safety relating to BNFL's employees for 1989 and data compared with the previous year. Routine monitoring, non-radiological safety and 'incidents' are discussed and 'statutory' whole-body exposures, nuclear incidents, lost-time accidents, and types of injury are tabulated. (author)

  4. [Concept analysis of a participatory approach to occupational safety and health].

    Science.gov (United States)

    Yoshikawa, Etsuko

    2013-01-01

    The purpose of this study was to analyze a participatory approach to occupational safety and health, and to examine the possibility of applying the concept to the practice and research of occupational safety and health. According to Rodger's method, descriptive data concerning antecedents, attributes and consequences were qualitatively analyzed. A total of 39 articles were selected for analysis. Attributes with a participatory approach were: "active involvement of both workers and employers", "focusing on action-oriented low-cost and multiple area improvements based on good practices", "the process of emphasis on consensus building", and "utilization of a local network". Antecedents of the participatory approach were classified as: "existing risks at the workplace", "difficulty of occupational safety and health activities", "characteristics of the workplace and workers", and "needs for the workplace". The derived consequences were: "promoting occupational safety and health activities", "emphasis of self-management", "creation of safety and healthy workplace", and "contributing to promotion of quality of life and productivity". A participatory approach in occupational safety and health is defined as, the process of emphasis on consensus building to promote occupational safety and health activities with emphasis on self-management, which focuses on action-oriented low-cost and multiple area improvements based on good practices with active involvement of both workers and employers through utilization of local networks. We recommend that the role of the occupational health professional be clarified and an evaluation framework be established for the participatory approach to promote occupational safety and health activities by involving both workers and employers.

  5. Occupational safety and health: progress toward the 1990 objectives for the nation.

    OpenAIRE

    Millar, J D; Myers, M L

    1983-01-01

    Occupational safety and health is 1 of 15 areas addressed in the Public Health Service's Objectives for the Nation. This area represents 104 million working men and women and the deaths, diseases, and injuries that result from exposures to hazards in their work environment. Characteristics of public health practice are compared with characteristics of occupational safety and health practice. The National Institute for Occupational Safety and Health (NIOSH), created by the Occupational Safety ...

  6. Occupational Safety and Health Act: A Responsibility for Science Teachers

    Science.gov (United States)

    Science Teacher, 1974

    1974-01-01

    Presents implications of the Occupational Safety and Health Act for science teachers both as workers and as they encourage, in students, the development of positive safety attitudes for future occupations. (PEB)

  7. Basic safety standards for radiation protection in the Syrian Arab Republic

    International Nuclear Information System (INIS)

    1989-01-01

    The aim of these standards is to insure safety and protection from ionizing radiation in the Syrian Arab Republic. Licensing regulations, dose limits,maximum permissible dose and all kinds of exposure such as occupational, medical and public exposure are presented

  8. Basic safety standards for radiation protection in the Syrian Arab Republic

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-07-01

    The aim of these standards is to insure safety and protection from ionizing radiation in the Syrian Arab Republic. Licensing regulations, dose limits,maximum permissible dose and all kinds of exposure such as occupational, medical and public exposure are presented.

  9. Danger zone: Men, masculinity and occupational health and safety in high risk occupations

    OpenAIRE

    Stergiou-Kita, Mary; Mansfield, Elizabeth; Bezo, Randy; Colantonio, Angela; Garritano, Enzo; Lafrance, Marc; Lewko, John; Mantis, Steve; Moody, Joel; Power, Nicole; Theberge, Nancy; Westwood, Eleanor; Travers, Krista

    2015-01-01

    The workplace is a key setting where gender issues and organizational structures may influence occupational health and safety practices. The enactment of dominant norms of masculinity in high risk occupations can be particularly problematic, as it exposes men to significant risks for injuries and fatalities. To encourage multi-disciplinary collaborations and advance knowledge in the intersecting areas of gender studies, men’s health, work and workplace health and safety, a national network of...

  10. Occupational Health and Safety and Employer Motivation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jensen, Per Langå

    2004-01-01

    It is often argued and supported by a number of case studies that investment in human factors and occupational health and safety can pay. But any employer has a number of possible in-vestments, and many of these may have a larger marginal utility than health and safety. In addition it is often...... difficult to calculate the exact pay off for human factors and health and safety – how to calculate higher motivation for instance. The economic benefit as a possible driving force for improvement of occupational health and safety is likely to exist but it must be considered a relatively weak force. Another...... important driving force for improvements in health and safety. No employer likes to be ‘branded’ as immoral, manifested in fines by the labour inspectors or media attention to an unsafe conduct. Strategies to im-prove health and safety therefore need to focus on the legitimacy as the probably strongest...

  11. IAEA Safety Standards

    International Nuclear Information System (INIS)

    2016-09-01

    The IAEA Safety Standards Series comprises publications of a regulatory nature covering nuclear safety, radiation protection, radioactive waste management, the transport of radioactive material, the safety of nuclear fuel cycle facilities and management systems. These publications are issued under the terms of Article III of the IAEA’s Statute, which authorizes the IAEA to establish “standards of safety for protection of health and minimization of danger to life and property”. Safety standards are categorized into: • Safety Fundamentals, stating the basic objective, concepts and principles of safety; • Safety Requirements, establishing the requirements that must be fulfilled to ensure safety; and • Safety Guides, recommending measures for complying with these requirements for safety. For numbering purposes, the IAEA Safety Standards Series is subdivided into General Safety Requirements and General Safety Guides (GSR and GSG), which are applicable to all types of facilities and activities, and Specific Safety Requirements and Specific Safety Guides (SSR and SSG), which are for application in particular thematic areas. This booklet lists all current IAEA Safety Standards, including those forthcoming

  12. Ensuring the quality of occupational safety risk assessment.

    Science.gov (United States)

    Pinto, Abel; Ribeiro, Rita A; Nunes, Isabel L

    2013-03-01

    In work environments, the main aim of occupational safety risk assessment (OSRA) is to improve the safety level of an installation or site by either preventing accidents and injuries or minimizing their consequences. To this end, it is of paramount importance to identify all sources of hazards and assess their potential to cause problems in the respective context. If the OSRA process is inadequate and/or not applied effectively, it results in an ineffective safety prevention program and inefficient use of resources. An appropriate OSRA is an essential component of the occupational safety risk management process in industries. In this article, we performed a survey to elicit the relative importance for identified OSRA tasks to enable an in-depth evaluation of the quality of risk assessments related to occupational safety aspects on industrial sites. The survey involved defining a questionnaire with the most important elements (tasks) for OSRA quality assessment, which was then presented to safety experts in the mining, electrical power production, transportation, and petrochemical industries. With this work, we expect to contribute to the main question of OSRA in industries: "What constitutes a good occupational safety risk assessment?" The results obtained from the questionnaire showed that experts agree with the proposed OSRA process decomposition in steps and tasks (taxonomy) and also with the importance of assigning weights to obtain knowledge about OSRA task relevance. The knowledge gained will enable us, in the near future, to build a framework to evaluate OSRA quality for industrial sites. © 2012 Society for Risk Analysis.

  13. Zagazig Journal of Occupational Health and Safety: About this journal

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety: About this journal. Journal Home > Zagazig Journal of Occupational Health and Safety: About this journal. Log in or Register to get access to full text downloads.

  14. [OCCUPATIONAL HEALTH RISK ASSESSMENT AND MANAGEMENT IN WORKERS IN IMPROVEMENT OF NATIONAL POLICY IN OCCUPATIONAL HYGIENE AND SAFETY].

    Science.gov (United States)

    Shur, P Z; Zaĭtseva, N V; Alekseev, V B; Shliapnikov, D M

    2015-01-01

    In accordance with the international documents in the field of occupational safety and hygiene, the assessment and minimization of occupational risks is a key instrument for the health maintenance of workers. One of the main ways to achieve it is the minimization of occupational risks. Correspondingly, the instrument for the implementation of this method is the methodology of analysis of occupational risks. In Russian Federation there were the preconditions for the formation of the system for the assessment and management of occupational risks. As the target of the national (state) policy in the field of occupational safety in accordance with ILO Conventions it can be offered the prevention of accidents and injuries to health arising from work or related with it, minimizing the causes of hazards inherent in the working environment, as far as it is reasonably and practically feasible. Global trend ofusing the methodology of the assessment and management of occupational risks to life and health of citizens requires the improvement of national policies in the field of occupational hygiene and safety. Achieving an acceptable level of occupational risk in the formation of national policy in the field of occupational hygiene and safety can be considered as one of the main tasks.

  15. 77 FR 75633 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

    Science.gov (United States)

    2012-12-21

    ... (Closed). 8:00 a.m.-5:00 p.m., February 22, 2013 (Closed). Place: Embassy Suites, 1900 Diagonal Road... conduct of Study Section business and for the study section to consider safety and occupational health...

  16. [Occupational health and safety management systems: scenarios and perspectives for occupational physicians].

    Science.gov (United States)

    Santantonio, P; Casciani, M; Bartolucci, G B

    2008-01-01

    This paper analyzes the role of the occupational physicians, taking into account the new Italian legislation within the frame of CSR, that puts in a new light the physicians inside the Organizations. In this context, Occupational Medicine and Workplace Health Promotion play a central role in most of the items of the Occupational Health and safety management systems, from H&S politics to training, from First Aid to audit and revision systems. From this innovative perspective, the authors try to identify the occupational physician's new challenges and opportunities.

  17. Occupational Safety and Health and Healthy Housing: A Review of Opportunities and Challenges.

    Science.gov (United States)

    Jacobs, David E; Forst, Linda

    their homes. Improvements in legislation, regulation, and international frameworks are needed to maximize OSH and HH collaboration and realize significant cobenefits. Occupational safety and health and HH standards should include requirements to protect both workers and occupants. Because homes can also be workplaces, both workers and housing occupants will receive important cobenefits when OSH and HH standards use proven interventions to protect workers and occupants.

  18. [The System and Human Resources for Occupational Health in Thailand - For Japanese Enterprises to Manage Proper Occupational Health Activities at Overseas Workplaces].

    Science.gov (United States)

    Fukai, Nanae; Hiraoka, Ko; Kajiki, Shigeyuki; Kobayashi, Yuichi; Thanachokswang, Chatchai; Arphorn, Sara; Uehara, Msamichi; Nakanishi, Shigemoto; Mori, Koji

    We collected information necessary for conducting occupational health activities in Thailand with regard to occupational safety and health management systems (OSHMS). Based on an information collection check sheet developed in our previous research, we conducted a literature research and visited four local business bases, one ISO certification body and two higher educational institutions. The legal framework concerning occupational health in Thailand consists of the Occupational Safety, Health and Environment Act of 2011 and 13 ordinances from the Ministry of Labor under that act. The original OSHMS standards for Thailand have been published, and the number of companies, especially large ones, introducing systems conforming to these standards has increased in recent years. For occupational health specialists, there are training programs for specialized occupational health physicians, professional safety officers and occupational nurses. Professional safety officers also play a central role in occupational health in the workplace. In Thailand, it is necessary to ensure compliance with related acts and regulations, and to conduct voluntary activities that satisfy workplace conditions as based on the OSHMS standards. Additionally, to improve occupational health performance, it is essential to use high-quality external services and/or occupational health professionals. Headquarters of Japanese companies have considered taking countermeasures such as recommending active use of professional safety officers, as well as issuing global standards.

  19. 29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

  20. 29 CFR 1960.12 - Dissemination of occupational safety and health program information.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Dissemination of occupational safety and health program... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.12 Dissemination of occupational safety and health program information. (a) Copies of the Act, Executive Order 12196, program...

  1. 29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the Act established a National Advisory Committee on Occupational Safety and Health. The Committee is to...

  2. Occupational safety and health in Europe: lessons from the past, challenges and opportunities for the future.

    Science.gov (United States)

    Gagliardi, Diana; Marinaccio, Alessandro; Valenti, Antonio; Iavicoli, Sergio

    2012-01-01

    Europe has always played a key role in the field of Occupational Health and Safety (OHS) and can be considered the cradle of Occupational Health. The European policy framework has been set since the establishment of the European Union, but its strength lies in the enactment of the Framework Directive on Occupational Health and Safety (89/391/EC), which has had a strong positive impact on the assessment and management of occupational risk factors and has promoted the quick diffusion of common standards across Europe. Yet, some implementation issues still remain to be addressed, due to changes in the world of work, fragmentation, economic crisis and, more generally, to the impact of globalization. Therefore, actions need to be reviewed with respect to research plans and policy implementation so as to support the OHS social dimension fostering a broader concept of wellbeing at work.

  3. Health surveillance of persons occupationally exposed to ionizing radiation: Guidance for occupational physicians

    International Nuclear Information System (INIS)

    1998-01-01

    This Safety Report is intended mainly for occupational physicians, as well as for occupational health service personnel, to assist them in routine practice by specifying the features of work under radiation conditions, the general rules of radiological protection for occupational exposure and the organization of the medical surveillance of workers occupationally exposed to radiation. The Report is consistent with the recommendations of the International Commission on Radiological Protection presented in its Publication 60 (1990) and with the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources published by the IAEA in 1966. It supersedes Safety Series No.83 (Radiation Protection in Occupational Health: Manual for Occupational Physicians) published by the IAEA in 1987

  4. Annual report on occupational safety 1987

    International Nuclear Information System (INIS)

    1988-01-01

    This report presents detailed information on occupational safety relating to the Company's employees for 1987. Data are quoted in tables and text, together with data from the previous year for comparison where available. The report is presented under the following headings: radiological and non-radiological safety, incidents, appendices (statutory dose limits, nuclear incident criteria for reporting to ministers). (author)

  5. Continuous restraint control systems: safety improvement for various occupants

    NARCIS (Netherlands)

    Laan, E. van der; Jager, B. de; Veldpaus, F.; Steinbuch, M.; Nunen, E. van; Willemsen, D.

    2009-01-01

    Occupant safety can be significantly improved by continuous restraint control systems. These restraint systems adjust their configuration during the impact according to the actual operating conditions, such as occupant size, weight, occupant position, belt usage and crash severity. In this study,

  6. OCCUPATIONAL HEALTH AND SAFETY ACT NO.6331 AND TOXICOLOGY

    OpenAIRE

    AYAN, Burak

    2018-01-01

    Workers exposureto variety of hazardous chemicals related to the type of work carried out. Regulationsabout chemicals which may be unsafe for workers is regulated at theOccupational Health and Safety Act No.6331.In this review regulatory framework of occupational health and safety forchemicals are assessed in order for chemicals to be used properly andsafely. 

  7. Framework for continuous assessment and improvement of occupational health and safety issues in construction companies.

    Science.gov (United States)

    Mahmoudi, Shahram; Ghasemi, Fakhradin; Mohammadfam, Iraj; Soleimani, Esmaeil

    2014-09-01

    Construction industry is among the most hazardous industries, and needs a comprehensive and simple-to-administer tool to continuously assess and promote its health and safety performance. Through the study of various standard systems (mainly Health, Safety, and Environment Management System; Occupational Health and Safety Assessment Series 180001; and British Standard, occupational health and safety management systems-Guide 8800), seven main elements were determined for the desired framework, and then, by reviewing literature, factors affecting these main elements were determined. The relative importance of each element and its related factors was calculated at organizational and project levels. The provided framework was then implemented in three construction companies, and results were compared together. THE RESULTS OF THE STUDY SHOW THAT THE RELATIVE IMPORTANCE OF THE MAIN ELEMENTS AND THEIR RELATED FACTORS DIFFER BETWEEN ORGANIZATIONAL AND PROJECT LEVELS: leadership and commitment are the most important elements at the organization level, whereas risk assessment and management are most important at the project level. The present study demonstrated that the framework is easy to administer, and by interpreting the results, the main factors leading to the present condition of companies can be determined.

  8. Software for the occupational health and safety integrated management system

    International Nuclear Information System (INIS)

    Vătăsescu, Mihaela

    2015-01-01

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety

  9. Software for the occupational health and safety integrated management system

    Energy Technology Data Exchange (ETDEWEB)

    Vătăsescu, Mihaela [University Politehnica Timisoara, Department of Engineering and Management, 5 Revolutiei street, 331128 Hunedoara (Romania)

    2015-03-10

    This paper intends to present the design and the production of a software for the Occupational Health and Safety Integrated Management System with the view to a rapid drawing up of the system documents in the field of occupational health and safety.

  10. Securing the future through occupational safety. A managerial task; Zukunftssicherung durch Arbeitssicherheit. Eine Managementaufgabe

    Energy Technology Data Exchange (ETDEWEB)

    Gaertner, Dieter [RWE Power AG, Bergheim (Germany). Opencast Mines Div.; Groener, Harald [RWE Power AG, Essen (Germany). Arbeitssicherheit; Obermeyer, Bjoern [RWE Power AG, Koeln (Germany). PHS-B Operativer Arbeitsschutz

    2010-05-15

    The significance of occupational safety has increased over recent years so that this topic is now an integral task of management. To be able to meet the tighter requirements, occupational safety has to be dealt with in the same way as other topics. Therefore, RWE Power has introduced an occupational health and safety management system (AMS) whose organizational and operational structures are described in the following. The consistent implementation of occupational safety requires issue- and target group-related programmes of emphasis to be carried out in addition to the AMS. Two of these occupational safety programmes of RWE Power, which have contributed to a successful reduction in accident numbers, are presented along with the steps involved. Further examples from several plants and mines show how occupational safety has been further developed. In a company, occupational safety can only be successful if the managerial tasks are accepted and if superiors, occupational safety officers, industrial physicians, works council members, and partners ''pull together'' and if all employees are actively involved. (orig.)

  11. An innovative approach to interdisciplinary occupational safety and health education.

    Science.gov (United States)

    Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

    2011-07-01

    The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

  12. [History of occupational health physician and industrial safety and health law].

    Science.gov (United States)

    Horie, Seichi

    2013-10-01

    In Japan, an employer of a workplace with 50 or more employees is legally required to assign an occupational health physician. The assignment rate in 2010 was reported as 87.0%. This policy started with the provision of "factory physician"in the Factory Law in 1938, then the Labour Standard Law stipulated "physician hygienist" in 1947, and finally the Industrial Safety and Health Law defined "occupational health physician" in 1972. In 1996, a revision of the law then required those physicians to complete training courses in occupational medicine, as designated by an ordinance. Historically, an on-site physician was expected to cure injuries and to prevent communicable diseases of factory workers. The means of occupational hygienic management by working environment measurements, etc., and of health management by health examinations, etc., were developed. Localized exhaust ventilation and personal protection equipment became widely utilized. Qualification systems for non-medical experts in occupational hygiene were structured, and relationships between employers and occupational health physicians were stipulated in the legislative documents. Currently, the Japan Medical Association and the University of Occupational and Environmental Health, Japan educate and train occupational health physicians, and the Japan Society for Occupational Health maintains a specialized board certification system for these physicians. In the future, additional efforts should be made to strengthen the expertise of occupational health physicians, to define and recognize the roles of non-medical experts in occupational hygiene, to incorporate occupational health services in small enterprises, to promote occupational health risk assessment in the workplace, and to reorganize the current legislation, amended repeatedly over the decades.

  13. Occupational health and safety challenges in China--focusing on township-village enterprises.

    Science.gov (United States)

    Wang, Xiaorong; Wu, Siying; Song, Qingkun; Tse, Lap-Ah; Yu, Ignatius T S; Wong, Tze-Wai; Griffiths, Sian

    2011-01-01

    China has experienced dramatic industrialization, urbanization, and economic growth over the last 3 decades. The rapid transformation and dramatic prosperity of industries in rural areas have, in turn, created tremendous challenges for occupational health and safety (OHS). This article was prepared to address occupational health and safety issues in township- and village-owned enterprises (TVEs) from several aspects, including working conditions and workplace hazards, major recognized OHS problems, implications of TVE industries to environmental health, and migrant workers. Among the major recognized OHS problems, pneumoconiosis, chemical poisoning, and workplace accidents, especially in small-scale coal mines, are highlighted. It is suggested that the national polices and regulations that specifically target TVEs are indispensable and a more powerful administrative structure should be established to ensure that the pertinent polices, regulations, and OHS standards can be enforced widely and effectively in practice. Copyright © 2011 Taylor & Francis Group, LLC

  14. An analysis of violations of Osha's (1987) occupational exposure to benzene standard.

    Science.gov (United States)

    Williams, Pamela R D

    2014-01-01

    The Occupational Safety and Health Administration (OSHA), which was formed by the Occupational Safety and Health Act of 1970 (OSH Act), establishes enforceable health and safety standards in the workplace and issues violations and penalties for non-compliance with these standards. The purpose of the current study was to evaluate the number and type of violations of the OSHA (1987) Occupational Exposure to Benzene Standard. Violations of the OSHA Hazard Communication Standard (HCS), particularly those that may pertain to specific provisions of the benzene standard, were also assessed. All analyses were based on OSHA inspection data that have been collected since the early 1970s and that are publicly available from the U.S. Department of Labor enforcement website. Analysis of these data shows that fewer than a thousand OSHA violations of the benzene standard have been issued over the last 25+ years. The results for benzene are in contrast to those for some other toxic and hazardous substances that are regulated by OSHA, such as blood-borne pathogens, lead, and asbestos, for which there have been issued tens of thousands of OSHA violations. The number of benzene standard violations also varies by time period, standard provision, industry sector, and other factors. In particular, the greatest number of benzene standard violations occurred during the late 1980s to early/mid 1990s, soon after the 1987 final benzene rule was promulgated. The majority of benzene standard violations also pertain to noncompliance with specific provisions and subprovisions of the standard dealing with initial exposure monitoring requirements, the communication of hazards to employees, and medical surveillance programs. Only a small fraction of HCS violations are attributed, at least in part, to potential benzene hazards in the workplace. In addition, most benzene standard violations are associated with specific industries within the manufacturing sector where benzene or benzene

  15. The need for detailed gender-specific occupational safety analysis.

    Science.gov (United States)

    Cruz Rios, Fernanda; Chong, Wai K; Grau, David

    2017-09-01

    The female work in population is growing in the United States, therefore the occupational health and safety entities must start to analyze gender-specific data related to every industry, especially to nontraditional occupations. Women working in nontraditional jobs are often exposed to extreme workplace hazards. These women have their safety and health threatened because there are no adequate policies to mitigate gender-specific risks such as discrimination and harassment. Employers tend to aggravate this situation because they often fail to provide proper reporting infrastructure and support. According to past studies, women suffered from workplace injuries and illnesses that were less prominent among men. Statistics also confirmed that men and women faced different levels of risks in distinct work environments. For example, the rates of workplace violence and murders by personal acquaintances were significantly higher among women. In this paper, the authors analyze prior public data on fatal and nonfatal injuries to understand why we need to differentiate genders when analyzing occupational safety and health issues. The analyses confirmed that women dealt with unique workplace hazards compared to men. It is urgent that public agencies, such as the U.S. Department of Labor, record gender-specific data in details and by occupations and industries. The reader will become aware of the current lack - and need - of data and knowledge about injuries and illnesses separated by gender and industry. Finally, safety and health researchers are encouraged to investigate the gender-specific data in all industries and occupations, as soon as they become available. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

  16. Occupational radiation safety in mining

    International Nuclear Information System (INIS)

    Stocker, H.

    1985-01-01

    The first International Conference on Occupational Radiation Safety in Mining was held three years ago in Golden, Colorado, U.S.A., and it provided an excellent forum for an exchange of information on the many scientific, technical and operational aspects of radiation safety in mining. I am aware of the broad spectrum of epidemiological, engineering and related studies which have been pursued during the past three years with a view to achieving further improvements in radiation protection and I expect that the information on these studies will contribute significantly to a wider understanding of subject, and in particular, the means by which radiation safety measures in mining can be optimized

  17. 42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

  18. Annual report on occupational safety 1983

    International Nuclear Information System (INIS)

    1984-08-01

    The 1983 Annual Report on occupational safety at BNFL is presented. Data for whole-body radiation doses and skin and extremity doses are given for BNFL employees together with 1982 data for comparison. Similarly, accidental deaths and major injuries are recorded. Finally information on the frequency of both nuclear and non-nuclear incidents reported to the Health and Safety Executive is given. (U.K.)

  19. 2007 motor vehicle occupant safety survey. Volume 3, air bags report

    Science.gov (United States)

    2008-11-01

    The 2007 Motor Vehicle Occupant Safety Survey was the sixth in a series of periodic national telephone surveys on occupant : protection issues conducted for the National Highway Traffic Safety Administration (NHTSA). Data collection was conducted : b...

  20. 75 FR 10629 - Federal Advisory Council on Occupational Safety and Health

    Science.gov (United States)

    2010-03-08

    ... Part III Department of Labor Occupational Safety and Health Administration Federal Advisory Council on Occupational Safety and Health; Notice #0;#0;Federal Register / Vol. 75, No. 44 / Monday, March 8, 2010 / Notices#0;#0; [[Page 10630

  1. Economic Techniques of Occupational Health and Safety Management

    Science.gov (United States)

    Sidorov, Aleksandr I.; Beregovaya, Irina B.; Khanzhina, Olga A.

    2016-10-01

    The article deals with the issues on economic techniques of occupational health and safety management. Authors’ definition of safety management is given. It is represented as a task-oriented process to identify, establish and maintain such a state of work environment in which there are no possible effects of hazardous and harmful factors, or their influence does not go beyond certain limits. It was noted that management techniques that are the part of the control mechanism, are divided into administrative, organizational and administrative, social and psychological and economic. The economic management techniques are proposed to be classified depending on the management subject, management object, in relation to an enterprise environment, depending on a control action. Technoeconomic study, feasibility study, planning, financial incentives, preferential crediting of enterprises, pricing, profit sharing and equity, preferential tax treatment for enterprises, economic regulations and standards setting have been distinguished as economic techniques.

  2. Occupational health and safety among commercial sex workers.

    Science.gov (United States)

    Ross, Michael W; Crisp, Beth R; Månsson, Sven-Axel; Hawkes, Sarah

    2012-03-01

    The concept of occupational health and safety (OHS) for commercial sex workers has rarely been investigated, perhaps because of the often informal nature of the workplace, the associated stigma, and the frequently illegal nature of the activity. We reviewed the literature on health, occupational risks, and safety among commercial sex workers. Cultural and local variations and commonalities were identified. Dimensions of OHS that emerged included legal and policing risks, risks associated with particular business settings such as streets and brothels, violence from clients, mental health risks and protective factors, alcohol and drug use, repetitive strain injuries, sexually transmissible infections, risks associated with particular classes of clients, issues associated with male and transgender commercial sex workers, and issues of risk reduction that in many cases are associated with lack of agency or control, stigma, and legal barriers. We further discuss the impact and potential of OHS interventions for commercial sex workers. The OHS of commercial sex workers covers a range of domains, some potentially modifiable by OHS programs and workplace safety interventions targeted at this population. We argue that commercial sex work should be considered as an occupation overdue for interventions to reduce workplace risks and enhance worker safety.

  3. The Impact of Language and Culture Diversity in Occupational Safety.

    Science.gov (United States)

    De Jesus-Rivas, Mayra; Conlon, Helen Acree; Burns, Candace

    2016-01-01

    Occupational health nursing plays a critical part in improving the safety of foreign labor workers. The development and implementation of safety training programs do not always regularly take into account language barriers, low literacy levels, or cultural elements. This oversight can lead to more injuries and fatalities among this group. Despite established health and safety training programs, a significant number of non-native English speakers are injured or killed in preventable, occupation-related accidents. Introducing safety programs that use alternative teaching strategies such as pictograms, illustrations, and hands-on training opportunities will assist in addressing challenges for non-English laborers. Occupational health nursing has an opportunity to provide guidance on this subject and assist businesses in creating a safer and more productive work environment. © 2015 The Author(s).

  4. OSHA's approach to risk assessment for setting a revised occupational exposure standard for 1,3-butadiene.

    Science.gov (United States)

    Grossman, E A; Martonik, J

    1990-01-01

    In its 1980 benzene decision [Industrial Union Department, ALF-CIO v. American Petroleum Institute, 448 U.S. 607 (1980)], the Supreme Court ruled that "before he can promulgate any permanent health or safety standard, the Secretary [of Labor] is required to make a threshold finding that a place of employment is unsafe--in the sense that significant risks are present and can be lessened by a change in practices" (448 U.S. at 642). The Occupational Safety and Health Administration (OSHA) has interpreted this to mean that whenever possible, it must quantify the risk associated with occupational exposure to a toxic substance at the current permissible exposure limit (PEL). If OSHA determines that there is significant risk to workers' health at its current standard, then it must quantify the risk associated with a variety of alternative standards to determine at what level, if any, occupational exposure to a substance no longer poses a significant risk. For rulemaking on occupational exposure to 1,3-butadiene, there are two studies that are suitable for quantitative risk assessment. One is a mouse inhalation bioassay conducted by the National Toxicology Program (NTP), and the other is a rat inhalation bioassay conducted by Hazelton Laboratories Europe. Of the four risk assessments that have been submitted to OSHA, all four have used the mouse and/or rat data with a variety of models to quantify the risk associated with occupational exposure to 1,3-butadiene. In addition, OSHA has performed its own risk assessment using the female mouse and female rat data and the one-hit and multistage models.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:2401254

  5. Measuring enterprise proactiveness in managing occupational safety

    DEFF Research Database (Denmark)

    Sønderstrup-Andersen, Hans H. K.; Fløcke, Thomas; Mikkelsen, Kim Lyngby

    2010-01-01

    The aim of this paper is to communicate results, and lessons learned, from developing and applying a national questionnaire based survey for measuring the initiation of occupational safety activities in Danish enterprises and public institutions1. The survey is cross-sectional and it is part...... on the safety attitude index....

  6. Occupational Safety And Health (Osh From Islamic Perspective: A Conceptual Study

    Directory of Open Access Journals (Sweden)

    Afifah Binti Ismail

    2018-05-01

    Full Text Available ABSTRACT This paper illustrates occupational safety and health (OSH based on Islamic perspective in human resource management. This paper has been written based on the following objectives; ato state the duty of employer to provide safety workplace and to concern on employee health; bto list out the management system of OSH based on Islamic perspective as preventive measure. A purely qualitative approach of literature review was done and Islamic OSH is derived from Islamic principles which are guide by Al-Quran and sunnah. The responsibility to preserve safety and health of employee does not only relies to the employer solely but involved all workers, the government and the authority bodies as the runner for the Occupational safety and Health Act  OSHA 1994, Islamic order’s and policy to be implemented in the organization. The Occupational Safety and Health Master Plan (OSHMP 2020 is a tremendous incentive by the Ministry of Human Resource to cope and minimize the number of accident and injuries in Malaysia.   Keywords: Islamic occupational safety and health, employee safety and health, Islamic management system of OSH

  7. Proposed performance standards for the Agricultural Hazardous Occupations Order certification training program.

    Science.gov (United States)

    French, B F; Field, W E; Tormoehlen, R

    2007-07-01

    The performance standards that accompany Gearing Up for Safety, the agricultural production safety training curriculum for youth, were designed to meet the certification testing requirements of the Agricultural Hazardous Occupations Order (AgHOs) certification training program. The AgHOs requires that certain youth who are older than 13 and younger than 16 years of age complete a prescribed training program before being eligible for employment on farms to perform certain tasks considered hazardous. These training resources will be available for implementation and can be accessed by contacting the second author. To our knowledge, up until this time, few, if any, standardized testing procedures or instruments have had the necessary psychometric evidence to support use of the resulting scores to assess the readiness of youth to meet the basic certification requirements contained in the AgHOs. This article describes the rationale, methods, and key findings from a standard-setting session held to establish minimum passing scores for a proposed testing process. The test will be used as a component of the Gearing Up for Safety certification process for youth workers seeking employment to perform job functions as specified under the AgHOs. Readers may be able to apply this standardized testing process, or similarly accepted processes, to other or future testing and certification projects involving agricultural safety and health.

  8. Annual report on occupational safety

    International Nuclear Information System (INIS)

    1985-09-01

    A report is given on the occupational safety relating to BNFL's employees for the year 1984 and the results compared to those obtained in 1983. Data are presented for each of the Company's Sites on whole body exposures, accidental deaths and major injuries and nuclear and non-nuclear incidents. The results show that the Company average body dose continues to be less than 5mSv, there were no accidental deaths but 15 major injuries. One nuclear incident and 9 non-nuclear incidents were notified to the Health and Safety Executive. (UK)

  9. 75 FR 66797 - National Advisory Committee on Occupational Safety and Health (NACOSH), Charter Renewal

    Science.gov (United States)

    2010-10-29

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0012] National Advisory Committee on Occupational Safety and Health (NACOSH), Charter Renewal AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Notice of renewal of the NACOSH charter...

  10. Occupational health and safety services

    NARCIS (Netherlands)

    Kwantes, J.H.; Hooftman, W.; Michiel, F.

    2014-01-01

    The position, role and aim of the protective and preventive services (article 7 of the Framework directive (89/391/EEC within the legal OSH-system will be the focus point of this article. Article 13 of the EU Treaty gives the EU the possibility to draft a legal framework on occupational safety and

  11. [Alcohol and work: the role of the company physician in the occupational health and safety management systems].

    Science.gov (United States)

    Patussi, V; Muran, A

    2010-01-01

    The organization of safety in the working places and the increasing attention to behaviours and life styles of workers that may lead to increasing occupational risks are the pick innovative aspects of the recent changes in our country's legislation about occupational safety. In this organization, the role of the company physician is becoming more and more important and his work of evaluation beginning with the knowledge both of the working places and of the workers's lifestyles, is irreplaceable. His role in organizing the managing standards of occupational safety and health cannot be limited to health supervision but must be an essential element in risk assessment in the prevision of workplaces and of safe working conditions, in workers training and information, in organizing the control system of each business. The present paper examines--referring to the current regulation--the duties and functions of a company physician when facing the problems concerning the working risks tied to alcohol assumption.

  12. 78 FR 12065 - National Institute for Occupational Safety and Health Personal Protective Technology for...

    Science.gov (United States)

    2013-02-21

    ... Institute for Occupational Safety and Health Personal Protective Technology for Pesticide Handlers: Stakeholder Meeting AGENCY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers...: Notice of public meeting. SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) of...

  13. Occupational safety manual. 4. rev. ed.

    International Nuclear Information System (INIS)

    Skiba, R.

    1979-01-01

    With the rapid technical development and increasing life expectancy, protection against occupational hazards has become a central economic and social problem. Consultants and others responsible for occupational safety should not only be interested in their work but also have sufficient basic knowledge. The complex subject is presented in a simplified and easily comprehensible manner, with particular regard to the practical side. The book is at the same time a textbook for basic training and a reference manual for the working practice. (orig./HP) [de

  14. The relationship between patient safety climate and occupational safety climate in healthcare - A multi-level investigation.

    Science.gov (United States)

    Pousette, Anders; Larsman, Pernilla; Eklöf, Mats; Törner, Marianne

    2017-06-01

    Patient safety climate/culture is attracting increasing research interest, but there is little research on its relation with organizational climates regarding other target domains. The aim of this study was to investigate the relationship between patient safety climate and occupational safety climate in healthcare. The climates were assessed using two questionnaires: Hospital Survey on Patient Safety Culture and Nordic Occupational Safety Climate Questionnaire. The final sample consisted of 1154 nurses, 886 assistant nurses, and 324 physicians, organized in 150 work units, within hospitals (117units), primary healthcare (5units) and elderly care (28units) in western Sweden, which represented 56% of the original sample contacted. Within each type of safety climate, two global dimensions were confirmed in a higher order factor analysis; one with an external focus relative the own unit, and one with an internal focus. Two methods were used to estimate the covariation between the global climate dimensions, in order to minimize the influence of bias from common method variance. First multilevel analysis was used for partitioning variances and covariances in a within unit part (individual level) and a between unit part (unit level). Second, a split sample technique was used to calculate unit level correlations based on aggregated observations from different respondents. Both methods showed associations similar in strength between the patient safety climate and the occupational safety climate domains. The results indicated that patient safety climate and occupational safety climate are strongly positively related at the unit level, and that the same organizational processes may be important for the development of both types of organizational climate. Safety improvement interventions should not be separated in different organizational processes, but be planned so that both patient safety and staff safety are considered concomitantly. Copyright © 2017 National Safety

  15. Assessing systemwide occupational health and safety risks of energy technologies

    International Nuclear Information System (INIS)

    Rowe, M.D.

    1982-01-01

    Input-output modelling is now being used to assess systemwide occupational and public health and safety risks of energy technologies. Some of the advantages and disadvantages of this method are presented and some of its important limitations are discussed. Its primary advantage is that it provides a standard method with which to compare technologies on a consistent basis without extensive economic analysis. Among the disadvantages are limited range of applicability, limited spectrum of health impacts, and inability to identify unusual health impacts unique to a new technology. (author)

  16. 29 CFR 1902.6 - Consultation with the National Institute for Occupational Safety and Health.

    Science.gov (United States)

    2010-07-01

    ... Safety and Health. 1902.6 Section 1902.6 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... Occupational Safety and Health. The Assistant Secretary will consult, as appropriate, with the Director of the National Institute for Occupational Safety and Health with regard to plans submitted by the States under...

  17. Applying a realistic evaluation model to occupational safety interventions

    DEFF Research Database (Denmark)

    Pedersen, Louise Møller

    2018-01-01

    Background: Recent literature characterizes occupational safety interventions as complex social activities, applied in complex and dynamic social systems. Hence, the actual outcomes of an intervention will vary, depending on the intervention, the implementation process, context, personal characte......Background: Recent literature characterizes occupational safety interventions as complex social activities, applied in complex and dynamic social systems. Hence, the actual outcomes of an intervention will vary, depending on the intervention, the implementation process, context, personal...... and qualitative methods. This revised model has, however, not been applied in a real life context. Method: The model is applied in a controlled, four-component, integrated behaviour-based and safety culture-based safety intervention study (2008-2010) in a medium-sized wood manufacturing company. The interventions...... involve the company’s safety committee, safety manager, safety groups and 130 workers. Results: The model provides a framework for more valid evidence of what works within injury prevention. Affective commitment and role behaviour among key actors are identified as crucial for the implementation...

  18. Integrated Management System Incorporating Quality Management and Management of Environment, Health and Occupational Safety

    International Nuclear Information System (INIS)

    Manchev, B.; Nenkova, B.; Tomov, E.

    2012-01-01

    Risk Engineering Ltd is a Bulgarian private company founded in 1990 to provide engineering and consulting services applicable to each and every field of the energy sector. Since its establishment Risk Engineering Ltd develops, implement and apply a System for quality assurance, certified for the first time by BVQI (now Bureau Veritas Certification) in 1999 for conformity with the standard ISO 9001:1994. Later on, in connection with the revision of the standards of ISO 9000 series and introduction of the standard ISO 9001:2000 a Quality Management System in conformity with the standard ISO 9001:2000 was developed, introduced and certified. At present, Risk Engineering Ltd has got developed, documented, introduced and certified by Lloyd's Register Quality Assurance (LRQA) Quality Management System in compliance with ISO 9001:2008 on the process approach basis. On this basis and including the requirements of the ISO 14001:2004 (regarding the environment) and OHSAS 18001:2007 (regarding the health and occupational safety), Risk Engineering Ltd has developed and introduced Integrated Management System aim at achieving and demonstrating good results regarding protection of the environment, health and occupational safety. The processes under control by the Integrated Management System and applicable at the company are divided in two general types: A) Management processes: Strategic management and Management of the human resources. B) Processes describing the main activities: design/development process; project management; management of industrial projects and technical infrastructure project; construction, installation, repair and operation of power industry facilities; commercial activities and marketing; investigation of energy efficiency of industrial systems and certification of buildings regarding energy efficiency; consulting activity in the field of industry and energy as well as consultant in accordance with the Law of the Spatial Planning; management of the

  19. 29 CFR 1926.4 - Rules of practice for administrative adjudications for enforcement of safety and health standards.

    Science.gov (United States)

    2010-07-01

    ... shall be the same as those published in part 6 of this title with respect to safety and health... with the Assistant Secretary of Labor for Occupational Safety and Health who shall publish a notice in... enforcement of safety and health standards. 1926.4 Section 1926.4 Labor Regulations Relating to Labor...

  20. The impact of masculinity on safety oversights, safety priority and safety violations in two male-dominated occupations

    DEFF Research Database (Denmark)

    Nielsen, Kent; Hansen, Claus D.; Bloksgaard, Lotte

    2015-01-01

    Background Although men have a higher risk of occupational injuries than women the role of masculinity for organizational safety outcomes has only rarely been the object of research. Aim The current study investigated the association between masculinity and safety oversights, safety priority......-related context factors (safety leadership, commitment of the safety representative, and safety involvement) and three safety-related outcome factors (safety violations, safety oversights and safety priority) were administered twice 12 months apart to Danish ambulance workers (n = 1157) and slaughterhouse workers...

  1. Standard Establishment Through Scenarios (SETS): A new technique for occupational fitness standards.

    Science.gov (United States)

    Blacklock, R E; Reilly, T J; Spivock, M; Newton, P S; Olinek, S M

    2015-01-01

    An objective and scientific task analysis provides the basis for establishing legally defensible Physical Employment Standards (PES), based on common and essential occupational tasks. Infrequent performance of these tasks creates challenges when developing PES based on criterion, or content validity. Develop a systematic approach using Subject Matter Experts (SME) to provide tasks with 1) an occupationally relevant scenario considered common to all personnel; 2) a minimum performance standard defined by time, distance, load or work. Examples provided here relate to the development of a new PES for the Canadian Armed Forces (CAF). SME of various experience are selected based on their eligibility criteria. SME are required to define a reasonable scenario for each task from personal experience, provide occupational performance requirements of the scenario in sub-groups, and discuss and agree by consensus vote on the final standard based on the definition of essential. A common and essential task for the CAF is detailed as a case example of process application. Techniques to avoid common SME rating errors are discussed and advantages to the method described. The SETS method was developed as a systematic approach to setting occupational performance standards and qualifying information from SME.

  2. Safety Capital: The Management of Organizational Knowledge on Occupational Health and Safety

    Science.gov (United States)

    Nunez, Imanol; Villanueva, Mikel

    2011-01-01

    Purpose: The concept of Safety Capital was developed by analyzing the creation and composition of the Intellectual Capital embedded in Occupational Health and Safety (OHS) systems. The paper aims to address this relationship. Design/methodology/approach: By drawing a theoretical link for the relationship between OHS activities and intellectual…

  3. Occupational Safety Review of High Technology Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Lee Cadwallader

    2005-01-31

    This report contains reviews of operating experiences, selected accident events, and industrial safety performance indicators that document the performance of the major US DOE magnetic fusion experiments and particle accelerators. These data are useful to form a basis for the occupational safety level at matured research facilities with known sets of safety rules and regulations. Some of the issues discussed are radiation safety, electromagnetic energy exposure events, and some of the more widespread issues of working at height, equipment fires, confined space work, electrical work, and other industrial hazards. Nuclear power plant industrial safety data are also included for comparison.

  4. Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran

    Science.gov (United States)

    Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

    2016-01-01

    Objectives: This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. Method: A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. Results: The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Conclusion: Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs. PMID:27010083

  5. Occupational Safety and Health Measures in Micro-scale Enterprises (MSEs) in Shiraz, Iran.

    Science.gov (United States)

    Jahangiri, Mehdi; Rostamabadi, Akbar; Malekzadeh, Gholamreza; Sadi, Amin Fahandej; Hamzavi, Golnar; Rasooli, Javad; Momeni, Zahra; Ghaem, Haleh

    2016-05-25

    This study aimed to determine the extent of implementation of occupational safety and health measures in micro-scale enterprises (MSEs) and to assess the prevalence of occupational injuries and accidents and its relationship with occupational safety and health measures provided in the MSEs. A cross-sectional study was conducted among 595 of MSEs. An index called the Safety and Health Requirement Index (SHRI) was created and used to calculate the percentage of provided occupational safety and health measures. The relationship between the SHRI and the occurrence of occupational accidents and injuries was investigated with the independent samples t-test and one-way ANOVA. The mean SHRI score was 60.43%, which was categorized into moderate level. Of the 30.9% of enterprises that had experienced accidents and injuries, the most common types of injuries were musculoskeletal disorders and cuts, and the least common types were pulmonary and hearing problems. Results of one-way ANOVA revealed a statistically significant relationship between the mean SHRI score and industrial branch, enterprise size, and type of accident and injury. The independent samples t-test showed that the occurrence of occupational accidents and injuries was not significantly influenced by provided health and safety measures in MSEs. Given the high percentage of enterprises with very poor to poor levels for the SHRI and the high prevalence of occupational accidents and injuries among the studied MSEs, feasible protective strategies and job safety training programs are required to promote occupational health and safety in the studied MSEs.

  6. An airport occupational health and safety management system from the OHSAS 18001 perspective.

    Science.gov (United States)

    Dejanović, Dejana; Heleta, Milenko

    2016-09-01

    Occupational health and safety represents a set of technical, medical, legal, psychological, pedagogical and other measures with the aim to detect and eliminate hazards that threaten the lives and health of employees. These measures should be applied in a systematic way. Therefore, the aim of this study is to review occupational health and safety legislation in Serbia and the requirements that airports should fulfill for Occupational Health and Safety Assessment Series certification. Analyzing the specificity of airport activities and injuries as their outcomes, the article also proposes preventive measures for the health and safety of employees. Furthermore, the airport activities which are the most important from the standpoint of risks are defined, as the goals for occupational health and safety performance improvement.

  7. Occupational health and safety surveillance and research using workers' compensation data.

    Science.gov (United States)

    Utterback, David F; Schnorr, Teresa M; Silverstein, Barbara A; Spieler, Emily A; Leamon, Tom B; Amick, Benjamin C

    2012-02-01

    Examine uses of US workers' compensation (WC) data for occupational safety and health purposes. This article is a summary of the proceedings from an invitational workshop held in September 2009 to discuss the use of WC data for occupational safety and health prevention purposes. Workers' compensation data systems, although limited in many ways, contain information such as medical treatments, their costs and outcomes, and disability causes that are unavailable from national occupational surveillance sources. Despite their limitations, WC records are collected in a manner consistent with many occupational health and safety surveillance needs. Reports are available on the use of WC data for surveillance and research purposes such as estimating the frequency, magnitude, severity, and cost of compensated injuries. Inconsistencies in WC data can limit generalization of research results.

  8. Using systematic review in occupational safety and health.

    Science.gov (United States)

    Howard, John; Piacentino, John; MacMahon, Kathleen; Schulte, Paul

    2017-11-01

    Evaluation of scientific evidence is critical in developing recommendations to reduce risk. Healthcare was the first scientific field to employ a systematic review approach for synthesizing research findings to support evidence-based decision-making and it is still the largest producer and consumer of systematic reviews. Systematic reviews in the field of occupational safety and health are being conducted, but more widespread use and adoption would strengthen assessments. In 2016, NIOSH asked RAND to develop a framework for applying the traditional systematic review elements to the field of occupational safety and health. This paper describes how essential systematic review elements can be adapted for use in occupational systematic reviews to enhance their scientific quality, objectivity, transparency, reliability, utility, and acceptability. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  9. 29 CFR 1926.96 - Occupational foot protection.

    Science.gov (United States)

    2010-07-01

    ... § 1926.96 Occupational foot protection. Safety-toe footwear for employees shall meet the requirements and specifications in American National Standard for Men's Safety-Toe Footwear, Z41.1-1967. [58 FR 35152, June 30... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

  10. Occupational Health and Safety in the Nigerian Public Sector ...

    African Journals Online (AJOL)

    The focus of this paper is to explore the issue of occupational health and safety ... this paper seeks to examine major causes of occupational hazards in the public ... not report to the management for fear of negative effect that may result from it.

  11. 76 FR 1460 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH); Committee Reestablishment

    Science.gov (United States)

    2011-01-10

    ... duties imposed by the Occupational Safety and Health (OSH) Act of 1970 (29 U.S.C. 655, 656). Authority to...(b) of the Occupational Safety and Health Act of 1970 (29 U.S.C. 655(b)(1), 656(b)), the Federal... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for...

  12. 29 CFR 2200.108 - Official Seal of the Occupational Safety and Health Review Commission.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Official Seal of the Occupational Safety and Health Review... Occupational Safety and Health Review Commission. The seal of the Commission shall consist of: A gold eagle... background, encircled by a white band edged in black and inscribed “Occupational Safety and Health Review...

  13. The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

    OpenAIRE

    Botti, Lucia

    2017-01-01

    Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and lo...

  14. Integration of radiation protection in occupational health and safety managementsystems - legal requirements and practical realization at the example of the Fraunhofer occupational health and safety management system FRAM

    International Nuclear Information System (INIS)

    Lambotte, S.; Severitt, S.; Weber, U.

    2002-01-01

    The protection of the employees, the people and the environment for the effects of radiation is regulated by numerous laws and rules set by the government and the occupational accident insurances. Primarily these rules apply for the responsibles, normally the employer, as well as for the safety officers. Occupational safety management systems can support these people to carry out their tasks and responsibilities effectively. Also, a systematic handling of the organisation secures that the numerous duties of documentation, time-checking of the proof-lists and dates are respected. Further more, the legal certainty for the responsibles and safety officers will be raised and the occupational, environment, radiation and health protection will be promoted. At the example of the Fraunhofer occupational safety management system (FrAM) it is demonstrated, how radiation protection (ionizing radiation) can be integrated in a progressive intranet supported management system. (orig.)

  15. Illinois Occupational Skill Standards: In-Store Retailing Cluster.

    Science.gov (United States)

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in occupations in the in-store retailing cluster. The document begins with a brief overview of the Illinois perspective on occupational skill standards…

  16. Evaluating Performance of Safety Management and Occupational Health Using Total Quality Safety Management Model (TQSM

    Directory of Open Access Journals (Sweden)

    E Mohammadfam

    2015-11-01

    Full Text Available Introduction: All organizations, whether public or private, necessitate performance evaluation systems in regard with growth, stability, and development in the competitive fields. One of the existing models for performance evaluation of occupational health and safety management is Total Quality Safety Management model (TQSM. Therefore, the present study aimed to evaluate performance of safety management and occupational health utilizing TQSM model. Methods: In this descriptive-analytic study, the population consisted of 16 individuals, including managers, supervisors, and members of technical protection and work health committee. Then the participants were asked to respond to TQSM questionnaire before and after the implementation of Occupational Health & Safety Advisory Services 18001 (OHSAS18001. Ultimately, the level of each program as well as the TQSM status were determined before and after the implementation of OHSAS18001. Results: The study results showed that the scores obtained by the company before OHSAS 18001’s implementation, was 43.7 out of 312. After implementing OHSAS 18001 in the company and receiving the related certificate, the total score of safety program that company could obtain was 127.12 out of 312 demonstrating a rise of 83.42 scores (26.8%. The paired t-test revealed that mean difference of TQSM scores before and after OHSAS 18001 implementation was proved to be significant (p> 0.05. Conclusion: The study findings demonstrated that TQSM can be regarded as an appropriate model in order to monitor the performance of safety management system and occupational health, since it possesses the ability to quantitatively evaluate the system performance.

  17. 77 FR 43090 - Safety and Occupational Health Study Section: Notice of Charter Renewal

    Science.gov (United States)

    2012-07-23

    ... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

  18. 75 FR 42455 - Safety and Occupational Health Study Section: Notice of Charter Renewal

    Science.gov (United States)

    2010-07-21

    ... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

  19. Occupational health and safety in China: the case of state-managed enterprises.

    Science.gov (United States)

    Chen, Meei-Shia; Chan, Anita

    2010-01-01

    The widely held image, inside and outside China, of the total absence of an occupational health and safety (OHS) system in that country is not an accurate picture. This article argues that the unsafe working conditions and prevalent occupational diseases and injuries widely reported in the Chinese and foreign media occur mostly in private mines and in the Asian foreign-funded and domestic private manufacturing sectors. In contrast, the capital-intensive, larger state-owned enterprises and enterprises that have been transformed from state enterprises generally have better OHS systems. An in-depth study of two such enterprises reveals viable OHS systems, worker-management OHS committees, regular health and safety inspections, and trade unions' and workers congresses' oversight and supervision. Above all, there is an enterprise culture that regards accidents as avoidable, and both workers and management feel distressed and guilty when accidents happen. The authors believe it is important to acknowledge and champion these positive examples of "best practices" that can be emulated in workplaces throughout China, which is under great pressure from competitive domestic and global forces to relax its OHS standards.

  20. Health and safety implications of occupational exposure to engineered nanomaterials.

    Science.gov (United States)

    Stebounova, Larissa V; Morgan, Hallie; Grassian, Vicki H; Brenner, Sara

    2012-01-01

    The rapid growth and commercialization of nanotechnology are currently outpacing health and safety recommendations for engineered nanomaterials. As the production and use of nanomaterials increase, so does the possibility that there will be exposure of workers and the public to these materials. This review provides a summary of current research and regulatory efforts related to occupational exposure and medical surveillance for the nanotechnology workforce, focusing on the most prevalent industrial nanomaterials currently moving through the research, development, and manufacturing pipelines. Their applications and usage precedes a discussion of occupational health and safety efforts, including exposure assessment, occupational health surveillance, and regulatory considerations for these nanomaterials. Copyright © 2011 Wiley Periodicals, Inc.

  1. Integrated Approaches to Occupational Health and Safety: A Systematic Review.

    Science.gov (United States)

    Cooklin, A; Joss, N; Husser, E; Oldenburg, B

    2017-09-01

    The study objective was to conduct a systematic review of the effectiveness of integrated workplace interventions that combine health promotion with occupational health and safety. Electronic databases (n = 8), including PsychInfo and MEDLINE, were systematically searched. Studies included were those that reported on workplace interventions that met the consensus definition of an "integrated approach," published in English, in the scientific literature since 1990. Data extracted were occupation, worksite, country, sample size, intervention targets, follow-up period, and results reported. Quality was assessed according to American College of Occupational and Environmental Medicine Practice Guidelines. Heterogeneity precluded formal meta-analyses. Results were classified according to the outcome(s) assessed into five categories (health promotion, injury prevention, occupational health and safety management, psychosocial, and return-on-investment). Narrative synthesis of outcomes was performed. A total of 31 eligible studies were identified; 23 (74%) were (quasi-)experimental trials. Effective interventions were most of those aimed at improving employee physical or mental health. Less consistent results were reported from integrated interventions targeting occupational health and safety management, injury prevention, or organizational cost savings. Integrated approaches have been posed as comprehensive solutions to complex issues. Empirical evidence, while still emerging, provides some support for this. Continuing investment in, and evaluation of, integrated approaches are worthwhile.

  2. 78 FR 40743 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2013-07-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... Director, NIOSH, on priorities in mine safety and health research, including grants and contracts for such...

  3. The occupational safety of health professionals working at community and family health centers.

    Science.gov (United States)

    Ozturk, Havva; Babacan, Elif

    2014-10-01

    Healthcare professionals encounter many medical risks while providing healthcare services to individuals and the community. Thus, occupational safety studies are very important in health care organizations. They involve studies performed to establish legal, technical, and medical measures that must be taken to prevent employees from sustaining physical or mental damage because of work hazards. This study was conducted to determine if the occupational safety of health personnel at community and family health centers (CHC and FHC) has been achieved. The population of this cross-sectional study comprised 507 nurses, 199 physicians, and 237 other medical personnel working at a total of 18 family health centers (FHC) and community health centers (CHC) in Trabzon, Turkey. The sample consisted of a total of 418 nurses, 156 physicians, and 123 other medical personnel. Sampling method was not used, and the researchers tried to reach the whole population. Data were gathered with the Occupational Safety Scale (OSS) and a questionnaire regarding demographic characteristics and occupational safety. According to the evaluations of all the medical personnel, the mean ± SD of total score of the OSS was 3.57 ± 0.98; of the OSS's subscales, the mean ± SD of the health screening and registry systems was 2.76 ± 1.44, of occupational diseases and problems was 3.04 ± 1.3 and critical fields control was 3.12 ± 1.62. In addition, occupational safety was found more insufficient by nurses (F = 14.18; P occupational safety to be insufficient as related to protective and supportive activities.

  4. Integrated occupational safety and health management solutions and industrial cases

    CERN Document Server

    Häkkinen, Kari; Niskanen, Toivo

    2015-01-01

    Maximizing reader insights into a new movement toward leadership approaches that are collaborated and shared,  and which views Occupational Safety and Health (OSH) and performance excellence within the wider examination of leadership relationships and practices, this book argues that these relationships and processes are so central to the establishment of OSH functioning that studying them warrants a broad, cross-disciplinary, multiple method analysis. Exploring the complexity of leadership by the impact that contexts (e.g., national and organizational culture) may have on leaders, this book discusses the related literature, then moves forward to show how a more comprehensive practical approach to Occupational Safety and Health and performance excellence can function on levels pertaining to events, individuals, groups, and organizations. This book proposes that greater clarity in understanding leadership in Occupational Safety and Health and performance excellence can be developed from addressing two fundame...

  5. Food Safety & Standards

    Institute of Scientific and Technical Information of China (English)

    无

    2005-01-01

    @@ An increasing number of people have realized that food safety is an important issue for public health. It not only concerns public health and safety, but also has direct influence on national economic progress and social development. The development and implementation of food safety standards play a vital role in protecting public health, as well as in standardizing and facilitating the sound development of food production and business.

  6. 75 FR 12554 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

    Science.gov (United States)

    2010-03-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... priorities in mine safety and health research, including grants and contracts for such research, 30 U.S.C...

  7. A comparison of safety belt use between commercial and noncommercial light-vehicle occupants.

    Science.gov (United States)

    Eby, David W; Fordyce, Tiffani A; Vivoda, Jonathon M

    2002-05-01

    The purpose of this study was to conduct an observational survey of safety belt use to determine the use rate of commercial versus noncommercial light-vehicle occupants. Observations were conducted on front-outboard vehicle occupants in eligible commercial and noncommercial vehicles in Michigan (i.e.. passenger cars, vans/minivans, sport-utility vehicles, and pickup trucks). Commercial vehicles that did not fit into one of the four vehicle type categories, such as tractor-trailers, buses, or heavy trucks, were not included in the survey. The study found that the restraint use rate for commercial light-vehicle occupants was 55.8% statewide. The statewide safety belt use rate for commercial light-vehicles was significantly lower than the rate of 71.2% for noncommercial light-vehicles. The safety belt use rate for commercial vehicles was also significantly different as a function of region, vehicle type, seating position, age group, and road type. The results provide important preliminary data about safety belt use in commercial versus noncommercial light-vehicles and indicate that further effort is needed to promote safety belt use in the commercial light-vehicle occupant population. The study also suggests that additional research is required in order to develop effective programs that address low safety belt use in the commercial light-vehicle occupant population.

  8. Telecommuting: Occupational health considerations for employee health and safety.

    Science.gov (United States)

    Healy, M L

    2000-06-01

    1. Information technology has moved "work" out of a centralized location. Employees who telecommute pose significant challenges and considerations for the practice of occupational health nursing. 2. Employer and employee benefits associated with telecommuting are reportedly associated with high levels of job satisfaction. However, the occupational health and safety risks of this new work environment need to be fully assessed and understood. 3. The ergonomic controls to minimize the risk of repetitive motion injuries are the same for both office and home locations. Additional attention need to be paid to implementing risk controls for other physical hazards and psychosocial considerations, as well as personal safety and security issues. 4. The scope of occupational health nursing practice needs to remain dynamic, recognizing the impact new technologies have on the workplace, to continue to meet the needs of the changing workplace.

  9. 78 FR 11651 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2013-02-19

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

  10. 77 FR 47850 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2012-08-10

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., research, experiments, and demonstrations relating to occupational safety and health and to mine health... Occupational Safety and Health on research and prevention programs. Specifically, the Board shall provide...

  11. Safety first. Status reports on the IAEA's safety standards

    International Nuclear Information System (INIS)

    Webb, G.; Karbassioun, A.; Linsley, G.; Rawl, R.

    1998-01-01

    Documents in the IAEA's Safety Standards Series known as RASS (Radiation Safety Standards) are produced to develop an internally consistent set of regulatory-style publications that reflects an international consensus on the principles of radiation protection and safety and their application through regulation. In this article are briefly presented the Agency's programmes on Nuclear Safety Standards (NUSS), Radioactive Waste Safety Standards (RADWASS), and Safe Transport of Radioactive Materials

  12. 78 FR 51729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2013-08-21

    ... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with... demonstrations relating to occupational safety and health and to mine health. The Board of Scientific Counselors shall provide guidance to the Director, National Institute for Occupational Safety and Health on...

  13. Promoting Occupational Safety and Health for Cambodian Entertainment Sector Workers.

    Science.gov (United States)

    Hsu, Lee-Nah; Howard, Richard; Torriente, Anna Maria; Por, Chuong

    2016-08-01

    Cambodia has developed booming textile, garment, tourism, and entertainment service industries since the mid-1990s. The 2007 global financial crisis pushed many garment workers, who lost their jobs, into the entertainment sector. Entertainment workers are typically engaged informally by their employers and are subjected to long working hours, sexual harassment, and violence. Many who sell beverages are forced into excessive alcohol consumption as part of their work. Many are also expected by their employers and clients to provide sexual services. To address unsafe and unhealthy working conditions for these workers, an innovative occupational safety and health regulation was adopted in 2014. This first-of-its-kind occupational safety and health regulation was developed jointly by the Cambodian Ministry of Labour and Vocational Training and employers' and workers' organizations in the entertainment sector. The implementation of this regulation can also be a viable contribution of occupational safety and health to HIV interventions for these workers. © The Author(s) 2016.

  14. 76 FR 78 - Federal Motor Vehicle Safety Standard; Engine Control Module Speed Limiter Device

    Science.gov (United States)

    2011-01-03

    ... [Docket No. NHTSA-2007-26851] Federal Motor Vehicle Safety Standard; Engine Control Module Speed Limiter... occupants. IIHS stated that on-board electronic engine control modules (ECM) will maintain the desired speed... be equipped with an electronic control module (ECM) that is capable of limiting the maximum speed of...

  15. Occupational Safety Precautions among Nurses at Four Hospitals, Nablus District, Palestine

    Directory of Open Access Journals (Sweden)

    IA Al-Khatib

    2015-10-01

    Full Text Available Occupational hazards, exposure to blood and body fluids (BBF accidents and safety precautions constitute an important public health issue. We assessed the prevalence and determinants of exposure to occupational hazards among nurses, and their knowledge of occupational safety precautions. In a cross-sectional study, we surveyed 332 nurses working in 4 hospitals, Nablus, West Bank, Palestine, by a questionnaire. Bivariate analysis tested the associations between ever exposure and the high likelihood of BBF exposure and the independent socio-demographic and occupational variables. Binary logistic regression analysis was used to assess the associations between the same two exposures and selected independent variables (those significant in the bivariate analysis. Prevalence of ever exposure to BBF was 51.7%, and was associated with working in private and charitable hospitals (OR 2.62, 2.68, respectively, having 4–6 family members (OR 0.52 and “nursing” being as one's top career choice at university (OR 0.48. The prevalence of high likelihood of BBF exposure was 62.2%, and was associated with working in charitable and private hospitals (OR 7.81, 2.43, respectively and “nursing” being as one's top career choice (OR 0.57. Regarding knowledge, most respondents believed it is necessary to enact laws and regulations regarding occupational safety precautions, reported the use of sharps containers, immediate disinfection after an accident, reporting an accident, and using personal protective equipment. Nurses had adequate knowledge of the risks of their hospital work. Nevertheless, they exhibited high prevalence of exposure to BBF accidents. Future studies are needed to re-evaluate existing occupational safety guidelines in hospitals, establish monitoring and evaluation protocols for health care workers' adherence to the guidelines, and institute well-defined policies for reporting occupational injury incidents so these can be handled appropriately.

  16. Internationally Comparable Measures of Occupational Status for the 1988 International Standard Classification of Occupations

    NARCIS (Netherlands)

    Ganzeboom, H.B.G.; Treiman, D.J.

    1996-01-01

    This paper provides operational procedures for coding internationally comparable measures of occupational status from the recently published International Standard Classification of Occupation 1988 (ISCO88) of the International Labor Office (ILO, 1990). We first discuss the nature of the ISCO88

  17. Proposed amendments to the Accord Acts to incorporate an offshore occupational health and safety regime

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-04-15

    The Canada Atlantic Accords signed in 1985 with Newfoundland and Labrador and in 1986 with Nova Scotia facilitate the orderly development of petroleum resources in Canada's Atlantic offshore area. These accords established the Canada-Newfoundland and Labrador Offshore Petroleum Board and the Canada-Nova Scotia Offshore Petroleum Board and made them responsible, on behalf of the federal government and the respective provincial government, for the joint management of petroleum resources in the offshore area. While the federal and provincial governments are responsible for establishing the regime for operational safety and occupational health and safety to be administered by the 2 boards, there is no division of responsibilities between the provincial occupational health and safety regime and the Accord Acts. There is agreement amongst governments that the accord acts should be amended to clarify responsibilities and vest sole authority for occupational health and safety in the accord acts. This document outlined the policy intent of the proposed amendments to the Accord Acts to ground an occupational health and safety regime for the east coast offshore areas in legislation. The document discussed legislation to be amended; governance; and provisions of the occupational health and safety regime. General matters such as the application of the policy, allocation of responsibility and interpretation were also discussed. The general duties of the operators were identified along with specific duties of operators; duties related to transportation; occupational health and safety policy; health and safety management system; codes of practice; notification of accidents; duties of employers; and occupational health and safety program. Compliance and enforcement provisions were also summarized.

  18. 78 FR 78362 - National Institute for Occupational Safety and Health Personal; Notice of public meeting in...

    Science.gov (United States)

    2013-12-26

    ... Institute for Occupational Safety and Health Personal; Notice of public meeting in Endicott, New York AGENCY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease Control.... SUMMARY: The National Institute for Occupational Safety and Health (NIOSH) of the Centers for Disease...

  19. Occupational health and safety in Brazil.

    Science.gov (United States)

    Frumkin, H; Câmara, V de M

    1991-12-01

    Brazil is the world's fifth largest and sixth most populous nation. Its economy is varied, with strong manufacturing, agriculture, mining, and service sectors. Therefore, a wide variety of workplace hazards confronts its work force. This paper describes Brazil's occupational safety and health regulatory scheme, workers' compensation system, plant-level practices, training, and data collection. We reviewed and analyzed Brazilian regulatory legislation and government and non-governmental organization (NGO) activity in occupational safety and health, as well as the structure and function of the workers' compensation system. We also reviewed available data on injuries and diseases from major sources, including the now-defunct Instituto Nacional do Previdencia Social (INPS) and the workers' compensation scheme, Seguro de Acidente de Trabalho (SAT). The incidence of workplace injuries has decreased in recent years and is now reported to be about 5 per 100 workers per year. The case fatality rate has been constant at about 5 fatalities per 1000 injuries. Less than 6% of reported injuries are classified as "diseases." Brazil's rates are comparable to those of Mexico and Zimbabwe, and two to four times higher than in most industrialized countries. Brazil has a high incidence of occupational injuries and diseases; these injuries and diseases are underreported; there is a large informal sector at special risk; and Brazil illustrates the disparity that exists in many countries between legislation on the books and legislation that is actually implemented.

  20. Strategy for Coordinated EPA/Occupational Safety and Health Administration (OSHA) Implementation of the Chemical Accident Prevention Requirements of the Clean Air Act Amendments of 1990

    Science.gov (United States)

    EPA and the Occupational Safety and Health Administration (OSHA) share responsibility for prevention: OSHA has the Process Safety Management Standard to protect workers, and EPA the Risk Management Program to protect the general public and environment.

  1. Occupational safety and health education and training for underserved populations.

    Science.gov (United States)

    O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

    2014-01-01

    This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

  2. The Occupational Safety and Health Act: Implications for School Administration.

    Science.gov (United States)

    Licht, Kenneth F.

    The Occupational Safety and Health Act (1970) concerns private schools but does not directly affect the operations of public schools or colleges. The intent, however, is to have the States develop and administer their own health and safety programs. Administrators should, therefore, initiate a comprehensive, districtwide safety education and…

  3. Kaizen: ergonomics approach to occupational health and safety.

    Science.gov (United States)

    Kumashiro, Masaharu

    2011-12-01

    Kaizen (work improvement) is the forte of Japanese industry. Kaizen activities were born in the early 20th century under the name efficiency research. These activities were the beginning of industrial engineering (IE). Later on people began to rethink the single-minded devotion to improving productivity. Then the job re-design concept was developed. The main target of kaizen in the area of occupational health and safety in Japanese manufacturing is the improvement of inadequate working posture followed by the improvement of work for transporting and lifting heavy objects. Unfortunately, the kaizen activities undertaken by most Japanese companies are still focused on improving productivity and quality. The know-how for promoting kaizen activities that integrate the three aspects of IE, occupational health, and ergonomics is not being accumulated, however. In particular, the IE techniques should be incorporated into kaizen activities aimed at occupational safety and health, and the quantitative assessment of workload is required. In addition, it is important for on-the-job kaizen training in the ERGOMA Approach for production supervisors, who are the main advocates of IE kaizen.

  4. Towards an occupational safety and health culture

    NARCIS (Netherlands)

    Zwetsloot, G.I.J.M.; Steijger, N.

    2014-01-01

    Occupational safety and health (OSH) is a highly regulated area that appears to be based on rational planning and logical management approaches, e.g. OSM Management Systems: employers and employees of organisations should be aware of OSH risks, assess these risks systematically, provide the

  5. Employers' Occupational Health and Safety Training Obligations in Framework Directive and Training Procedure and Rules in Turkey

    OpenAIRE

    Nuray Gökçek Karaca; Berrin Gökçek

    2015-01-01

    Employers occupational safety and health training obligations are regulated in 89/391/EEC Framework Directive and also in 6331 numbered Occupational Health and Safety Law in Turkey. The main objective of this research is to determine and evaluate the employers’ occupational health and safety training obligations in Framework Directive in comparison with the 6331 numbered Occupational Health and Safety Law and to examine training principles in Turkey. For this purpose, ...

  6. Occupational safety management: the role of causal attribution.

    Science.gov (United States)

    Gyekye, Seth Ayim

    2010-12-01

    The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

  7. Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

    Science.gov (United States)

    Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

    2016-01-01

    Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

  8. Using Occupational Safety and Health Administration accident investigations to study patterns in work fatalities.

    Science.gov (United States)

    Mendeloff, J M; Kagey, B T

    1990-11-01

    Investigations of fatalities by the Occupational Safety and Health Administration (OSHA) provide the most detailed available information about traumatic workplace deaths that are potentially related to violations of existing safety standards. Comparison of the number of such deaths investigated by OSHA from 1977 to 1986 with the comparable category of deaths reported to the Bureau of Labor Statistics Survey of Occupational Injuries and Illnesses indicates that the overall magnitudes have been roughly similar. The OSHA data contain more information than other sources and are especially valuable for analyses of fatalities at smaller workplaces. The OSHA data show that death rates decline sharply with establishment size; the inverted "U" pattern for lost workday injury rates is absent. Because accident investigations are conducted as part of an administrative system, the OSHA data can be influenced by changes in administrative policies. Changes over time in the percent of fatalities in which violations of OSHA standards were cited have clearly been influenced by changes in OSHA citation policy and thus do not provide a valid measure of the rate of violation-caused deaths. Realization of the epidemiological value of this data source depends upon a commitment from OSHA to maintain consistency in investigating accidents and to improve its data collection methods.

  9. Occupational Health and Safety in Ethiopia: A review of Situational ...

    African Journals Online (AJOL)

    The organization of occupational health and safety services is not yet resilient enough to handle the growing demands for workers' health in the context of industrialization. ... Commonly observed hazards in the workplace include occupational noise and ... Exposure to dust in textile and cement factories greatly exceeded ...

  10. Twenty sixth DAE safety and occupational health professionals meet: cryogenic safety, electrical safety and ergonomics at work place

    International Nuclear Information System (INIS)

    2009-01-01

    This conference gathered knowledge in safety and occupational health hazards in various fields of nuclear science and technology like radiations, high voltages, ultra-low temperature, ultra-high magnetic fields, electrical breakdown, fire, ergonomics and cryogenic safety at work place. Papers relevant to INIS database are indexed separately

  11. Integrating Occupational Health and Safety into TAFE Courses: Curriculum Topics.

    Science.gov (United States)

    Hall, Bob; Mageean, Pauline

    This guide is designed to help technical and further education (TAFE) curriculum writers in Australia integrate safety education into vocational education courses. It provides a general overview of occupational health and safety from the perspective of TAFE trade training and a brief summary of the major health and safety issues that might be…

  12. Data Analysis of Occupational Health and Safety Management and Total Quality Management Systems

    Directory of Open Access Journals (Sweden)

    Ahmet Yakut

    2013-01-01

    Full Text Available In our study, Total Quality Management, Occupational Health and Safety on the effects of the construction industry, building sites of Istanbul evaluated with the results of the survey of 25 firms. For Occupational Health and Safety program, walked healthy, active employees in her role increased and will increase the importance of education. Due to non-implementation of the OHS system in our country enough, work-related accidents and deaths and injuries resulting from these accidents is very high. Firms as a result of the analysis, an effective health and safety management system needs to be able to fulfill their responsibilities. This system is designated as OHSAS 18001 Occupational Health and Safety Management System and the construction industry can be regarded as the imperatives.

  13. Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry

    OpenAIRE

    Yoon, Seok J.; Lin, Hsing K.; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

    2013-01-01

    Background: The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. Methods: The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became ...

  14. Improving occupational safety and health by integration into product development

    DEFF Research Database (Denmark)

    Broberg, Ole

    1996-01-01

    A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

  15. The West Virginia Occupational Safety and Health Initiative: practicum training for a new marketplace.

    Science.gov (United States)

    Meyer, J D; Becker, P E; Stockdale, T; Ducatman, A M

    1999-05-01

    Occupational medicine practice has experienced a shift from larger corporate medical departments to organizations providing services for a variety of industries. Specific training needs will accompany this shift in practice patterns; these may differ from those developed in the traditional industrial or corporate medical department setting. The West Virginia Occupational Health and Safety Initiative involves occupational medicine residents in consultation to a variety of small industries and businesses. It uses the expertise of occupational physicians, health and safety extension faculty, and faculty in engineering and industrial hygiene. Residents participate in multidisciplinary evaluations of worksites, and develop competencies in team-building, workplace health and safety evaluation, and occupational medical consulting. Specific competencies that address requirements for practicum training are used to measure the trainee's acquisition of knowledge and skills. Particular attention is paid to the acquisition of group problem-solving expertise, skills relevant to the current market in practice opportunities, and the specific career interests of the resident physician. Preliminary evaluation indicates the usefulness of training in evaluation of diverse industries and worksites. We offer this program as a training model that can prepare residents for the challenges of a changing marketplace for occupational health and safety services.

  16. Occupational driver safety: conceptualising a leadership-based intervention to improve safe driving performance.

    Science.gov (United States)

    Newnam, Sharon; Lewis, Ioni; Watson, Barry

    2012-03-01

    Occupational driving crashes are the most common cause of death and injury in the workplace. The physical and psychological outcomes following injury are also very costly to organizations. Thus, safe driving poses a managerial challenge. Some research has attempted to address this issue through modifying discrete and often simple target behaviours (e.g., driver training programs). However, current intervention approaches in the occupational driving field generally consider the role of organizational factors in workplace safety. This study adopts the A-B-C framework to identify the contingencies associated with an effective exchange of safety information within the occupational driving context. Utilizing a sample of occupational drivers and their supervisors, this multi-level study examines the contingencies associated with the exchange of safety information within the supervisor-driver relationship. Safety values are identified as an antecedent of the safety information exchange, and the quality of the leader-member exchange relationship and safe driving performance is identified as the behavioural consequences. We also examine the function of role overload as a factor influencing the relationship between safety values and the safety information exchange. Hierarchical linear modelling found that role overload moderated the relationship between supervisors' perceptions of the value given to safety and the safety information exchange. A significant relationship was also found between the safety information exchange and the subsequent quality of the leader-member exchange relationship. Finally, the quality of the leader-member exchange relationship was found to be significantly associated with safe driving performance. Theoretical and practical implications of these results are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. New forms of contractual relationships and the implications for occupational safety and health

    NARCIS (Netherlands)

    Goudswaard, A.; André, J.C.; Ekstedt, E.

    2002-01-01

    Changes in the world of work can give rise to new risk areas or change the way that occupational safety and health needs to be managed. This has implications for workplaces themselves and also for the occupational safety and health system. For this reason the 'changing world of work' has been a

  18. Improving health, safety and energy efficiency in New Zealand through measuring and applying basic housing standards.

    Science.gov (United States)

    Gillespie-Bennett, Julie; Keall, Michael; Howden-Chapman, Philippa; Baker, Michael G

    2013-08-02

    Substandard housing is a problem in New Zealand. Historically there has been little recognition of the important aspects of housing quality that affect people's health and safety. In this viewpoint article we outline the importance of assessing these factors as an essential step to improving the health and safety of New Zealanders and household energy efficiency. A practical risk assessment tool adapted to New Zealand conditions, the Healthy Housing Index (HHI), measures the physical characteristics of houses that affect the health and safety of the occupants. This instrument is also the only tool that has been validated against health and safety outcomes and reported in the international peer-reviewed literature. The HHI provides a framework on which a housing warrant of fitness (WOF) can be based. The HHI inspection takes about one hour to conduct and is performed by a trained building inspector. To maximise the effectiveness of this housing quality assessment we envisage the output having two parts. The first would be a pass/fail WOF assessment showing whether or not the house meets basic health, safety and energy efficiency standards. The second component would rate each main assessment area (health, safety and energy efficiency), potentially on a five-point scale. This WOF system would establish a good minimum standard for rental accommodation as well encouraging improved housing performance over time. In this article we argue that the HHI is an important, validated, housing assessment tool that will improve housing quality, leading to better health of the occupants, reduced home injuries, and greater energy efficiency. If required, this tool could be extended to also cover resilience to natural hazards, broader aspects of sustainability, and the suitability of the dwelling for occupants with particular needs.

  19. The IAEA safety standards

    International Nuclear Information System (INIS)

    Karbassioun, Ahmad

    1995-01-01

    During the development of the NUSS standards, wide consultation was carried out with all the Member States to obtain a consensus and the programme was supervised by a Senior Advisory Group consisting of senior safety experts from 13 countries. This group of senior regulators later became what is now known as the Nuclear Safety Standards Advisory Group (NUSSAG) and comprises of senior regulatory experts from 16 countries. The standards that were developed comprise of four types of documents: safety fundamentals; codes of practice; safety guides; and safety practices. The safety fundamentals set out the basic objectives, concepts and principles for nuclear safety in nuclear power plants. The codes of practice, are of a legislative nature, and establish the general objectives that must be fulfilled to ensure adequate nuclear power plant safety. They cover five areas: governmental organization; siting, design, operation and quality assurance. The safety guides, administrative in character, recommend procedures and acceptable technical solutions to implement the codes and guides by presenting further details gained from Member States, on the application and interpretation of individual concepts in the NUSS codes and guides. In total in the NUSS series there is currently one Fundamentals document, five Codes of Practice and fifty-six Safety Guides

  20. Occupational safety in multicultural teams and organizations: A research agenda

    NARCIS (Netherlands)

    Starren, A.; Hornikx, J.; Luijters, K.

    2013-01-01

    Safety is an important issue in the workplace, in particular at the lower end of the labor market where the workforce often consists of people with different cultural backgrounds. Studies have underlined the potential threats to occupational safety of this workforce. Surprisingly, however, very

  1. Creating a Culture of Prevention in Occupational Safety and Health Practice.

    Science.gov (United States)

    Kim, Yangho; Park, Jungsun; Park, Mijin

    2016-06-01

    The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a positive safety culture in the workplace. The characteristics of work in the 21(st) century have given rise to new issues related to workers' health, such as new types of work-related disorders, noncommunicable diseases, and inequality in the availability of occupational health services. Overcoming these new and emerging issues requires a culture of prevention at the national level. The present paper addresses: (1) how to change safety cultures in both theory and practice at the level of the workplace; and (2) the role of prevention culture at the national level.

  2. Creating a Culture of Prevention in Occupational Safety and Health Practice

    Directory of Open Access Journals (Sweden)

    Yangho Kim

    2016-06-01

    Full Text Available The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a positive safety culture in the workplace. The characteristics of work in the 21st century have given rise to new issues related to workers' health, such as new types of work-related disorders, noncommunicable diseases, and inequality in the availability of occupational health services. Overcoming these new and emerging issues requires a culture of prevention at the national level. The present paper addresses: (1 how to change safety cultures in both theory and practice at the level of the workplace; and (2 the role of prevention culture at the national level.

  3. Occupational Safety and Health Program at the West Valley Demonstration Project

    International Nuclear Information System (INIS)

    L. M. Calderon

    1999-01-01

    The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

  4. Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations.

    Science.gov (United States)

    Mohammadfam, Iraj; Kamalinia, Mojtaba; Momeni, Mansour; Golmohammadi, Rostam; Hamidi, Yadollah; Soltanian, Alireza

    2017-06-01

    Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified and three noncertified companies. Findings indicate that the performance of certified companies with respect to occupational health and safety management practices is significantly better than that of noncertified companies. Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

  5. The Attitude of Construction Workers toward the Implementation of Occupational Health and Safety (OHS)

    Science.gov (United States)

    Widaningsih, L.; Susanti, I.; Chandra, T.

    2018-02-01

    Construction industry refers to one of the industries dealing with high accident rate. Besides its outdoor workplace involving many workers who usually work manually, the workers’ work culture and less awareness of occupational health and safety (OHS) are attributed to the high accident rate. This study explores some construction workers who are involved in some construction projects in big cities such as Bandung and Jakarta. The questionnaire-given to the construction workers focusing on stone construction, wood construction, and finishing session-reveals that the construction workers knowledge and understanding of nine Occupational Health and Safety (OHS) aspects reach above 50%. However, does not appear to reflect their knowledge and understanding of Occupational Health and Safety (OHS). The results of Focus Group Discussion (FGD) and an in-depth interview show that the fallacious implementation of Occupational Health and Safety (OHS) is attributed to their traditional “work culture”.

  6. Occupational safety and health management and risk governance

    NARCIS (Netherlands)

    Dijkman, A.; Terwoert, J.

    2014-01-01

    The advancement in new technologies, substances and new ways of working make it necessary to look beyond traditional methods of risk management. General drivers to emerging occupational safety and health (OSH) risks are: globalisation; demographic changes; technical innovations; changes in risk

  7. Ethics in occupational health and safety: case studies from Gujarat.

    Science.gov (United States)

    Patel, Jagdish; David, Siddarth

    2016-01-01

    Rapid industrialisation in India is giving employment to millions of people in the formal sector, and many more in the unorganised sector. However, the absence of clear policies, poorly enforced regulations, lack of systematic reporting of occupational diseases, lamentable socioeconomic conditions of the workers and their limited access to healthcare make occupational health and safety (OHS) a critical area.

  8. Development of prognostic occupational air standards for nanoparticles

    International Nuclear Information System (INIS)

    Radilov, Andrey S; Glushkova, Anzhela V; Dulov, Sergej A; Khlebnikova, Nataliya S

    2011-01-01

    The intensive progress of nanoindustry in the Russian Federation makes quite urgent the problem of development and especially express development of occupational exposure standards for nanoparticles and nanoaerosols in the workplace air. We developed an approach to comparative toxicity assessment and express calculation of occupational exposure standards for nanoaerosols, based on criteria for the development of maximum allowable concentrations (MACs) of aerosols in the workplace air. The developed approach was used to obtain prognostic MACs of certain aerosols in the workplace air, mg/m 3 : nano-Ag 0.08, nano-TiO 2 0.19, and C 60 0.08.

  9. Cross-index to DOE-prescribed occupational safety codes and standards

    International Nuclear Information System (INIS)

    1981-01-01

    This Cross-Index volume is the 1981 compilation of detailed information from more than three hundred and fifty DOE prescribed or OSHA referenced industrial safety codes and standards and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph and page. Each code is given a two-digit reference code number or letter in the Contents section (pages C to L) of this volume. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph and page of the referenced code containing expanded information on the individual listing

  10. Leadership and occupational safety and health (OSH): an expert analysis

    NARCIS (Netherlands)

    Elsler, D.; Flintrop, J.; Kaluza, S.; Hauke, A.; Starren, A.; Drupsteen, L.; Bell, N.

    2012-01-01

    In EU legislation as well as in scientific literature ever more attention is being paid to the important role of leadership in the improvement of Occupational Safety and Health (OSH). Improving the safety behaviour of employees requires understanding of the good leadership practices that can help

  11. Occupational health and safety issues among nurses in the Philippines.

    Science.gov (United States)

    de Castro, A B; Cabrera, Suzanne L; Gee, Gilbert C; Fujishiro, Kaori; Tagalog, Eularito A

    2009-04-01

    Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety.

  12. Occupational Health and Safety Issues Among Nurses in the Philippines

    Science.gov (United States)

    de Castro, A. B.; Cabrera, Suzanne L.; Gee, Gilbert C.; Fujishiro, Kaori; Tagalog, Eularito A.

    2009-01-01

    Nursing is a hazardous occupation in the United States, but little is known about workplace health and safety issues facing the nursing work force in the Philippines. In this article, work-related problems among a sample of nurses in the Philippines are described. Cross-sectional data were collected through a self-administered survey during the Philippine Nurses Association 2007 convention. Measures included four categories: work-related demographics, occupational injury/illness, reporting behavior, and safety concerns. Approximately 40% of nurses had experienced at least one injury or illness in the past year, and 80% had experienced back pain. Most who had an injury did not report it. The top ranking concerns were stress and overwork. Filipino nurses encounter considerable health and safety concerns that are similar to those encountered by nurses in other countries. Future research should examine the work organization factors that contribute to these concerns and strengthen policies to promote health and safety. PMID:19438081

  13. Review of carcinogenicity of hexavalent chrome and proposal of revising approval standards for an occupational cancers in Korea.

    Science.gov (United States)

    Kim, Jungwon; Seo, Sangyun; Kim, Yangho; Kim, Dae Hwan

    2018-01-01

    The objective of this study is to suggest revised recognition standards for occupational disease due to chromium (VI) by reflecting recent domestic and international research works and considering domestic exposure status with respect to target organs, exposure period, and cumulative exposure dose in relation to the chromium (VI)-induced occupational disease compensation. In this study, the reports published by major international institutions such as World Health Organization (WHO) International Agency for Research on Cancer (IARC) (2012), Occupational Safety and Health Administration (OSHA) (2006), National Institute for Occupational Safety and Health (NIOSH) (2013), American Conference of Governmental Industrial Hygienists (ACGIH) (2004), National Toxicology Program (NTP) (2014), and Agency for Toxic Substances and Disease Registry (ASTDR) (2012) were reviewed and the recent research works searched by PubMed were summarized. Considering the recent research works and the domestic situation, only lung cancer is conserved in the legislative bill in relation to chromium (VI), and the exposure period is not included in the bill. Nasal and paranasal sinus cancer was excluded from the list of cancers that are compensated as the chromium (VI)- induced occupational disease, while lung cancer remains in the list. In the view of legislative unity, considering the fact that only the cancers having sufficient evidence are included in the conventional list of cancers compensated as occupational disease, nasal and paranasal sinus cancer having limited evidence were excluded from the list.The exposure period was also removed from the legislative bill due to the insufficient evidence. Recent advices in connection with cumulative exposure dose were proposed, and other considerable points were provided with respect to individual occupational relevance. It is suggested that the current recognition standard which is "Lung cancer or nasal and paranasal sinus cancer caused by exposure

  14. 76 FR 28790 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2011-05-18

    ... Hearing Loss Prevention; Personal Protective Technologies; Health Hazard Evaluations; Construction Safety... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with... relating to occupational safety and health and to mine health. The Board of Scientific Counselors shall...

  15. Occupational Health and Safety and Organizational Commitment: Evidence from the Ghanaian Mining Industry.

    Science.gov (United States)

    Amponsah-Tawiah, Kwesi; Mensah, Justice

    2016-09-01

    This study seeks to examine the relationship and impact of occupational health and safety on employees' organizational commitment in Ghana's mining industry. The study explores occupational health and safety and the different dimensions of organizational commitment. A cross-sectional survey design was used for this study. The respondents were selected based on simple random sampling. Out of 400 questionnaires administered, 370 were returned (77.3% male and 22.7% female) and used for the study. Correlation and multiple regression analysis were used to determine the relationship and impact between the variables. The findings of this study revealed positive and significant relationship between occupational health and safety management, and affective, normative, and continuance commitment. Additionally, the results revealed the significant impact of occupational health and safety on affective, normative, and continuance commitment. Management within the mining sector of Ghana must recognize the fact that workers who feel healthy and safe in the performance of their duties, develop emotional attachment and have a sense of obligation to their organization and are most likely committed to the organization. Employees do not just become committed to the organization; rather, they expect management to first think about their health and safety needs by instituting good and sound policy measures. Thus, management should invest in the protection of employees' health and safety in organizations.

  16. Performance standards of road safety management

    Directory of Open Access Journals (Sweden)

    Čabarkapa Milenko R.

    2016-01-01

    Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

  17. Current Situation in Occupational Health and Safety Education in Higher Education Institutions of Turkey

    Directory of Open Access Journals (Sweden)

    Osman SİVRİKAYA

    2016-10-01

    Full Text Available During recent years, “the occupational health and safety” topic, which has gained importance in different countries in the world, has got attention in Turkey as well. The importance of human life and health is being increased in the world especially in the developed countries. As a result of this, in order to prevent the work accidents involving death or personal injury in the work life, the importance of the “occupational health and safety” is increasing gradually. In Turkey, the regulation studies are being carried out on this topic with the successive regulations especially during recent years. The application aspect of the topic, which is related to employers on the occasion of legal liabilities in accordance with the regulations, and for the graduates who are seeking for a job and especially want to be occupational safety specialists, it is popular from the point of view to be hope for a job. However, due to the difficulties to follow the rapidly changing developments, efficient awareness about the topic is not possible. It is possible that to get true and current information about the topic is possible by showing necessary sensitivity about occupational health and safety education. The graduates from different departments wonder the topics such as what is “occupational health and safety” education and “what kind of an education is necessary to become an occupational safety specialist”. Hence, in this article, by giving current information about occupational health and safety education and their content in the higher education institutions in Turkey, the points, which have had improvements compared to the past, are considered, and certain suggestions are presented to have better occupational health and safety education.

  18. Agricultural occupational health and safety perspectives among Latino-American youth.

    Science.gov (United States)

    Perla, M E; Iman, Esmeralda; Campos, Leticia; Perkins, Alexandra; Liebman, Amy K; Miller, Mary E; Beaudet, Nancy J; Karr, Catherine J

    2015-01-01

    Agricultural work is one of the most dangerous jobs for adolescents. Through a university-community partnership, the authors surveyed young primarily acculturated Latino-American farmworkers 14 to 18 years of age regarding their agricultural work experience. Topics included occupational health and safety education, work history, and information sources. The authors also evaluated the Rapid Clinical Assessment Tool (RCAT), a pictorial tool for identifying agricultural tasks to enhance discussion with clinical providers. One hundred forty youth with farmwork experience completed the survey; 6% reported a previous work-related injury or illness and 53% reported receiving some workplace health and safety training. Correct identification of legally restricted duties for youth varied but were generally low: participants identified working alone past 8 pm (57%), driving a forklift (56%), doing roofing work (39%), working in freezers (34%), and driving a delivery vehicle (30%). The Internet was identified as the most likely and reliable place youth would go to find information on workplace health and safety. Few (15%) reported clinician-initiated conversations on occupational health; however, a high proportion responded positively to questions regarding the usefulness of the RCAT for this purpose. This study highlights the need for workplace health and safety guidance for youth employed in agriculture. The results support Internet-based outreach and use of the RCAT to help facilitate occupational health discussions in clinical settings.

  19. Occupational Health and Safety in Aquaculture: Insights on Brazilian Public Policies.

    Science.gov (United States)

    de Oliveira, Pedro Keller; Cavalli, Richard Souto; Kunert Filho, Hiran Castagnino; Carvalho, Daiane; Benedetti, Nadine; Rotta, Marco Aurélio; Peixoto Ramos, Augusto Sávio; de Brito, Kelly Cristina Tagliari; de Brito, Benito Guimarães; da Rocha, Andréa Ferretto; Stech, Marcia Regina; Cavalli, Lissandra Souto

    2017-01-01

    Aquaculture has many occupational hazards, including those that are physical, chemical, biological, ergonomic, and mechanical. The risks in aquaculture are inherent, as this activity requires particular practices. The objective of the present study was to show the risks associated with the aquaculture sector and present a critical overview on the Brazilian public policies concerning aquaculture occupational health. Methods include online research involved web searches and electronic databases including Pubmed, Google Scholar, Scielo and government databases. We conducted a careful revision of Brazilian labor laws related to occupational health and safety, rural workers, and aquaculture. The results and conclusion support the idea that aquaculture requires specific and well-established industry programs and policies, especially in developing countries. Aquaculture still lacks scientific research, strategies, laws, and public policies to boost the sector with regard to occupational health and safety. The establishment of a safe workplace in aquaculture in developing countries remains a challenge for all involved in employer-employee relationships.

  20. Assessment on the Development of Occupational Health and Safety Management Based on OHSAS 18001

    International Nuclear Information System (INIS)

    Sigit Santoso

    2006-01-01

    This paper focused on the safety of a workplace, while the majority of the discussion is emphasized in the development of occupational health and safety management of the process system. The assessment on a development of occupational health and safety management based on the OHSAS 18001 has been done. The result indicates that OHSAS 18001 as an assessment specification for occupational health and safety management systems can be applied to any type of organization and industry, eventhough it does not give detailed specifications for design in a management system. The extent of the application depend on such factors as the OH&S policy of the organization, the nature of its activities and the risks and complexity of its operations. (author)

  1. 77 FR 42462 - Hawaii State Plan for Occupational Safety and Health; Proposed Modification of 18(e) Plan Approval

    Science.gov (United States)

    2012-07-19

    ... DEPARTMENT OF LABOR Occupational Safety and Health Administration 29 CFR Part 1952 [Docket ID. OSHA 2012-0029] RIN 1218-AC78 Hawaii State Plan for Occupational Safety and Health; Proposed Modification of 18(e) Plan Approval AGENCY: Occupational Safety and Health Administration (OSHA), Department of...

  2. A knowledge infrastructure for occupational safety and health.

    NARCIS (Netherlands)

    van Dijk, Frank J. H.; Verbeek, J. H.; Hoving, J. L.; Hulshof, C. T.

    2010-01-01

    Occupational Safety and Health (OSH) professionals should use scientific evidence to support their decisions in policy and practice. Although examples from practice show that progress has been made in evidence-based decision making, there is a challenge to improve and extend the facilities that

  3. Occupational health and safety in the Moroccan construction sites: preliminary diagnosis

    Science.gov (United States)

    Tarik, Bakeli; Adil, Hafidi Alaoui

    2018-05-01

    Managing occupational health and safety on Moroccan construction sector represents the first step for projects' success. In fact, by avoiding accidents, all the related direct and indirect costs and delays can be prevented. That leads to an important question always asked by any project manager: what are the factors responsible for accidents? How can they be avoided? Through this research, the aim is to go through these questions, to contribute in occupational health and safety principles understanding, to identify construction accidentology and risk management opportunities and to approach the case of Moroccan construction sites by an accurate diagnosis. The approach is to make researchers, managers, stakeholders and deciders aware about the criticality of construction sites health and safety situation. And, to do the first step for a scientific research project in relation with health and safety in the Moroccan construction sector. For this, the paper will study the related state of art namely about construction sites accidents causation, and will focus on Reason's `Swiss cheese' model and its utilization for Moroccan construction sites health and safety diagnosis. The research will end with an estimation of an accidents fatality rate in the Moroccan construction sector and a benchmarking with the international rates. Finally, conclusions will be presented about the necessity of Occupational Health and Safety Management System (OHSMS) implementation, which shall cover all risk levels, and insure, at the same time, that the necessary defenses against accidents are on place.

  4. Student manual, Book 2: Orientation to occupational safety compliance in DOE

    Energy Technology Data Exchange (ETDEWEB)

    Colley, D.L.

    1993-10-01

    This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling & storage; inspection responsibilities & procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics & human factors; medical & first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures.

  5. Assessment of occupational exposure due to external sources of radiation. Safety guide

    International Nuclear Information System (INIS)

    2000-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

  6. Assessment of occupational exposure due to external sources of radiation. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

  7. Assessment of occupational exposure due to external sources of radiation. Safety guide

    International Nuclear Information System (INIS)

    1999-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. The three Safety Guides on occupational radiation protection are jointly sponsored by the IAEA and the International Labour Office. The Agency gratefully acknowledges the contribution of the European Commission to the development of the present Safety Guide. The present Safety Guide addresses the assessment of exposure due to external sources of radiation in the workplace. Such exposure can result from a number of sources within a workplace, and the monitoring of workers and the workplace in such situations is an integral part of any occupational radiation protection programme. The assessment of exposure due to external radiation sources depends critically upon knowledge of the radiation type and energy and the conditions of exposure. The present Safety Guide reflects the major changes over the past decade in international practice in external dose assessment

  8. Status of the IAEA safety standards programme

    International Nuclear Information System (INIS)

    2002-01-01

    This presentation describes the status of the IAEA safety standards program to May 2002. The safety standards program overcome whole main nuclear implementations as General safety, Nuclear safety, Radiation safety, Radioactive waste safety, and Transport safety. Throughout this report the first column provides the list of published IAEA Safety Standards. The second gives the working identification number (DS) of standards being developed or revised. The bold type indicates standard issued under the authority the Board of Governors, others are issued under authority of the Director General. The last column provides the list of Committees, the first Committee listed has the lead in the preparation and review of the particular standard

  9. NASA's Software Safety Standard

    Science.gov (United States)

    Ramsay, Christopher M.

    2007-01-01

    NASA relies more and more on software to control, monitor, and verify its safety critical systems, facilities and operations. Since the 1960's there has hardly been a spacecraft launched that does not have a computer on board that will provide command and control services. There have been recent incidents where software has played a role in high-profile mission failures and hazardous incidents. For example, the Mars Orbiter, Mars Polar Lander, the DART (Demonstration of Autonomous Rendezvous Technology), and MER (Mars Exploration Rover) Spirit anomalies were all caused or contributed to by software. The Mission Control Centers for the Shuttle, ISS, and unmanned programs are highly dependant on software for data displays, analysis, and mission planning. Despite this growing dependence on software control and monitoring, there has been little to no consistent application of software safety practices and methodology to NASA's projects with safety critical software. Meanwhile, academia and private industry have been stepping forward with procedures and standards for safety critical systems and software, for example Dr. Nancy Leveson's book Safeware: System Safety and Computers. The NASA Software Safety Standard, originally published in 1997, was widely ignored due to its complexity and poor organization. It also focused on concepts rather than definite procedural requirements organized around a software project lifecycle. Led by NASA Headquarters Office of Safety and Mission Assurance, the NASA Software Safety Standard has recently undergone a significant update. This new standard provides the procedures and guidelines for evaluating a project for safety criticality and then lays out the minimum project lifecycle requirements to assure the software is created, operated, and maintained in the safest possible manner. This update of the standard clearly delineates the minimum set of software safety requirements for a project without detailing the implementation for those

  10. The occupational safety on the construction sites of the farm production buildings in Finland

    Directory of Open Access Journals (Sweden)

    M. Hellstedt

    2013-09-01

    Full Text Available The size of farms has increased considerably during Finland's EU membership. The growth has meant big investments in the new production buildings. The buildings have been switched to big industrialhall- like constructions from small-scale ones which have contained own timber and own work contribution. The objective of the project financed by Farmers' Social Insurance Institution was to improve occupational safety on farm building construction and renovation sites by disseminating current safety practices and by developing ways of action which are better than the prevailing ones. The project consisted of a literature review, statistical analysis, as well as a farmer and designer interviews. In the statistical analysis the MATA occupational injuries insurance claims database on farmers’ claims during construction and renovation work for the years 2005 - 2008 was compared with the register of Federation of Accident Insurance Institutions on the construction workers' injuries. In comparing the reasons of the accidents a clear difference was found; poor scaffoldings and ladders are still the main culprits on farm accidents. Farmer interviews were used to assess occupational safety measures on the construction site, occurred injuries and their types, nearmiss situations and the underlying factors which have led to the injuries. Also construction safety deficiencies as well as the direct and indirect costs caused for instance because of the delay in completion of construction project were discussed. Designer interviews aimed to find out how occupational safety and health considerations are taken into account in farm building planning and counseling, and how this experience of the designers should be utilized in order to improve safety at the construction sites on farms. Farmers knew their obligations on occupational safety poorly. The situation was further worsened by the fact that on the site the supervisor tasks were only nominally executed. The

  11. [Occupational risks among public safety and security forces].

    Science.gov (United States)

    Candura, S M; Verni, P; Minelli, C M; Rosso, G L; Cappelli, M I; Strambi, S; Martellosio, V

    2006-01-01

    The present paper tries to identify the occupational risk factors (physical, chemical, biological, psychological), variable depending on jobs and tasks, to which the heterogeneous public safety/security workers are exposed. The fight against criminality and public order maintenance imply (sometimes fatal) traumatic risks, and expose to psychophysical and sensorial tiring, unfavourable macro- and microclimatic conditions, the risk of baropathy (air navigation, underwater activities), noise (generated by firearms and several other sources), vibrations and shakings (automatic weapons, transport vehicles), the risk of electric injury, ionizing (X and gamma rays) and non-inonizing (ultraviolet rays, microwaves and radiofrequencies, electromagnetic fields) radiations. Chemical hazards include carbon monoxide and other combustion products (fires, urban traffic), substances released in chemical accidents, tear gases, lead (firing grounds, metal works, environmental pollution), solvents, lubrificants and cutting oils (mechanic repair and maintenance), laboratory materials and reagents, irritant and/or sensitizing agents contained in gloves. The main biological risks are tetanus, blood-borne diseases (viral hepatitis, AIDS), aerogenous diseases (e.g., tuberculosis, Legionnaire's disease, epidemic cerebrospinal meningitis), dog- or horse-transmitted zoonosis. Finally, emotional, psychosomatic and behavioural stress-related disorders (e.g., burn-out syndrome, post-traumatic stress disorder) are typically frequent. The presence of numerous and diversified hazards among public safety/security forces imposes the adoption of occupational medicine measures, including risk assessment, health education, technical and environmental prevention, personal protective devices, sanitary surveillance and biological monitoring, clinical interventions (diagnosis, therapy and rehabilitation of occupational accidents and illnesses), prompt medico-legal evaluation of occupational

  12. Occurrence of lead-related symptoms below the current occupational safety and health act allowable blood lead levels.

    Science.gov (United States)

    Rosenman, Kenneth D; Sims, Amy; Luo, Zhehui; Gardiner, Joseph

    2003-05-01

    To determine the occurrence of symptoms of lead toxicity at levels below the current allowable Occupational Safety and Health Act blood lead level of 50 micrograms/dL, standardized telephone interviews were conducted of individuals reported to a statewide laboratory-based surveillance system. Four hundred and ninety-seven, or 75%, of the eligible participants were interviewed. Gastrointestinal, musculoskeletal, and nervous system symptoms increased with increasing blood lead levels. Nervous, gastrointestinal, and musculoskeletal symptoms all began to be increased in individuals with blood leads between 30-39 micrograms/dL and possibly at levels as low as 25-30 micrograms/dL for nervous system symptoms. The results of this study of increased symptoms are consistent with and provide added weight to previous results showing subclinical changes in the neurologic and renal systems and sperm counts at blood lead levels currently allowed by the Occupational Safety and Health Act.

  13. Occupational Safety and Health Program Guidelines for Colleges and Universities. An Administrative Resource Manual.

    Science.gov (United States)

    Godbey, Frank W.; Hatch, Loren L.

    Designed as an aid for establishing and strengthening occupational safety and health programs on college and university campuses, this administrator guide is divided into four chapters. The first chapter defines and gives background information on the Occupational Safety and Health Act (OSHA). In addition, it presents a discussion of what the OSHA…

  14. Calculating externalities from damages in occupational health and safety

    Energy Technology Data Exchange (ETDEWEB)

    Burtraw, D; Shefftz, J

    1994-07-01

    This paper surveys the theoretical basis for the possibility that coal miner occupational health and safety damages are not adequately internalized into the production cost of mining coal and thereby impose an external cost on society.

  15. Calculating externalities from damages in occupational health and safety

    International Nuclear Information System (INIS)

    Burtraw, D.; Shefftz, J.

    1994-01-01

    This paper surveys the theoretical basis for the possibility that coal miner occupational health and safety damages are not adequately internalized into the production cost of mining coal and thereby impose an external cost on society

  16. Student manual, Book 2: Orientation to occupational safety compliance in DOE

    International Nuclear Information System (INIS)

    Colley, D.L.

    1993-01-01

    This is a student hand-book an Occupational Safety Compliance in DOE. Topics include the following: Electrical; materials handling ampersand storage; inspection responsibilities ampersand procedures; general environmental controls; confined space entry; lockout/tagout; office safety, ergonomics ampersand human factors; medical ampersand first aid, access to records; construction safety; injury/illness reporting system; and accident investigation procedures

  17. [Qualitative evaluation of employer requirements associated with occupational health and safety as good practice in small-scale enterprises].

    Science.gov (United States)

    Kuroki, Naomi; Miyashita, Nana; Hino, Yoshiyuki; Kayashima, Kotaro; Fujino, Yoshihisa; Takada, Mikio; Nagata, Tomohisa; Yamataki, Hajime; Sakuragi, Sonoko; Kan, Hirohiko; Morita, Tetsuya; Ito, Akiyoshi; Mori, Koji

    2009-09-01

    The purpose of this study was to identify what motivates employers to promote good occupational health and safety practices in small-scale enterprises. Previous studies have shown that small-scale enterprises generally pay insufficient attention to issues of occupational health and safety. These findings were mainly derived from questionnaire based surveys. Nevertheless, some small-scale enterprises in which employers exercise good leadership do take a progressive approach to occupational health and safety. Although good practices can be identified in small-scale enterprises, it remains unclear what motivates employers in small-scale enterprises to actively implement occupational health and safety practices. We speculated that identifying employer motivations in promoting occupational health would help to spread good practices among small-scale enterprises. Using a qualitative approach based on the KJ methods, we interviewed ten employers who actively promote occupational health and safety in the workplace. The employers were asked to discuss their views of occupational health and safety in their own words. A semi-structured interview format was used, and transcripts were made of the interviews. Each transcript was independently coded by two or more researchers. These transcripts and codes were integrated and then the research group members discussed the heading titles and structural relationships between them according to the KJ method. Qualitative analysis revealed that all the employers expressed a strong interest in a "good company" and "good management". They emphasized four elements of "good management", namely "securing human resources", "trust of business partners", "social responsibility" and "employer's health condition itself", and considered that addressing occupational health and safety was essential to the achievement of these four elements. Consistent with previous findings, the results showed that implementation of occupational health and safety

  18. Incorporation of occupational health and safety in cleaner production projects in South Africa

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2002-01-01

    The purpose of this research is to reveal ways in which occupational health and safety can be integrated in environmental cleaner production projects. Of particular interest are those cleaner production projects that are run by the Danish government's environmental assistance agency, Danced......, in South Africa.The study explores two main avenues of integration. First, integrating through better planning, focussing at the tools and procedures in use by Danced for project management -- integrating occupational health and safety into the project specification, so to speak.Second, integrating...... occupational health and safety into the environmental activities that take place at company level. Two ways of doing so are explored, the main distinction being company size. For large companies, integration of management systems may be attractive. For small companies, integration into a less formal network...

  19. Selection and ranking of occupational safety indicators based on fuzzy AHP: A case study in road construction companies

    Directory of Open Access Journals (Sweden)

    Janackovic, Goran Lj.

    2013-11-01

    Full Text Available This paper presents the factors, performance, and indicators of occupational safety, as well as a method to select and rank occupational safety indicators based on the expert evaluation method and the fuzzy analytic hierarchy process (fuzzy AHP. A case study is done on road construction companies in Serbia. The key safety performance indicators for the road construction industry are identified and ranked according to the results of a survey that included experts who assessed occupational safety risks in these companies. The case study confirmed that organisational factors have a dominant effect on the quality of the occupational health and safety management system in Serbian road construction companies.

  20. Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations

    Directory of Open Access Journals (Sweden)

    Iraj Mohammadfam

    2017-06-01

    Conclusion: Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

  1. Cross-Index to DOE-prescribed industrial safety codes and standards

    International Nuclear Information System (INIS)

    1980-01-01

    This Cross-Index volume is the 1980 compilation of detailed information from more than two hundred and ninety Department of Energy (DOE) prescribed or Occupational Health and Safety Administration (OSHA) referenced industrial safety codes and standards. The compilation of this material was conceived and initiated in 1973, and is revised yearly to provide information from current codes. Condensed data from individual code portions are listed according to reference code, section, paragraph, and page. Each code is given a two-digit reference code number or letter in the Contents section. This reference code provides ready identification of any code listed in the Cross-Index. The computerized information listings are on the left-hand portion of Cross-Index page; in order to the right of the listing are the reference code letters or numbers, the section, paragraph, and page of the referenced code containing expanded information on the individual listing. Simplified How to Use directions are listed. A glossary of letter initials/abbreviations for the organizations or documents, whose codes or standards are contained in this Cross-Index, is included

  2. Epidemiology of occupational injuries by nationality in Qatar: Evidence for focused occupational safety programmes.

    Science.gov (United States)

    Al-Thani, Hassan; El-Menyar, Ayman; Consunji, Rafael; Mekkodathil, Ahammed; Peralta, Ruben; Allen, Katharine A; Hyder, Adnan A

    2015-09-01

    Occupational injuries are the second leading cause of trauma admission in Qatar. Given the wide diversity of the country's migrant worker populations at risk, this study aimed to analyse and describe the epidemiology of these injuries based on the workers nationality residing in Qatar. A retrospective analysis of trauma registry data on occupational-related injuries was conducted. The analysis included all patients [aged ≥18 years] admitted to the Level I Hamad Trauma Center, from January 1, 2010 to December 31, 2013. Out of 6555 trauma admissions, 2015 (30.7%) patients had occupational injury. The admitted Case Fatality Rate (CFR) was 4.3 per 100 occupational injury related trauma admissions. Overall non-fatal occupational injury rate was 37.34 per 100,000 workers, whereas fatal injury rate was 1.58 per 100,000 workers. Most of the workers experiencing occupational injuries were from Nepal (28%), India (20%) and Bangladesh (9%). Fatal occupational injuries were predominately among Indians (20%), Nepalese (19%), and Filipinos/Bangladeshis (both 8%). Filipinos had the highest admitted CFR at 8.2 deaths per 100 trauma admissions with the next highest being Indians and Indonesians (4.2 per 100 trauma admissions). During the study period, the incidence of severe occupational injuries decreased despite a simultaneous increase in the worker population within Qatar. Almost one in four occupational injuries was a major trauma (ISS≥16). Nepalese and Indian workers represented 29% and 18% of all major trauma cases. Non-fatal occupational injuries appear to follow a pattern distinct from fatal ones. High-risk worker populations as defined by those with high admitted CFRs, experiencing the most severe or fatal injuries, must be the focus of targeted risk factor analysis and occupational safety interventions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Setting the standard: The IAEA safety standards set the global reference

    International Nuclear Information System (INIS)

    Williams, L.

    2003-01-01

    For the IAEA, setting and promoting standards for nuclear radiation, waste, and transport safety have been priorities from the start, rooted in the Agency's 1957 Statute. Today, a corpus of international standards are in place that national regulators and industries in many countries are applying, and more are being encouraged and assisted to follow them. Considerable work is done to keep safety standards updated and authoritative. They cover five main areas: the safety of nuclear facilities; radiation protection and safety of radiation sources; safe management of radioactive waste; safe transport of radioactive material; and thematic safety areas, such as emergency preparedness or legal infrastructures. Overall, the safety standards reflect an international consensus on what constitutes a high level of safety for protecting people and the environment. All IAEA Member States can nominate experts for the Agency standards committees and provide comments on draft standards. Through this ongoing cycle of review and feedback, the standards are refined, updated, and extended where needed

  4. [Evaluating training programs on occupational health and safety: questionnaire development].

    Science.gov (United States)

    Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

    2006-03-01

    To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

  5. Latino immigrant day laborer perceptions of occupational safety and health information preferences.

    Science.gov (United States)

    Díaz Fuentes, Claudia M; Martinez Pantoja, Leonardo; Tarver, Meshawn; Geschwind, Sandy A; Lara, Marielena

    2016-06-01

    We address immigrant day laborers' experiences with occupational safety in the construction industry in New Orleans, and opinions about content and method of communication for educational interventions to reduce occupational risks. In 2011, we conducted seven focus groups with 48 Spanish-speaking day laborers (8 women, 40 men, 35 years on average). Focus group results are based on thematic analysis. Most employers did not provide safety equipment, threatened to dismiss workers who asked for it, and did not provide health insurance. Attitudes toward accepting unsafe work conditions varied. Women faced lower pay and hiring difficulties than men. Day laborers preferred audio format over written, and content about consequences from and equipment for different jobs/exposures. Day laborers have common occupational experiences, but differences existed by gender, literacy and sense of control over safety. Day laborer information preferences and use of media needs further studying. Am. J. Ind. Med. 59:476-485, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  6. IAEA safety standards for research reactors

    International Nuclear Information System (INIS)

    Abou Yehia, H.

    2007-01-01

    The general structure of the IAEA Safety Standards and the process for their development and revision are briefly presented and discussed together with the progress achieved in the development of Safety Standards for research reactor. These documents provide the safety requirements and the key technical recommendations to achieve enhanced safety. They are intended for use by all organizations involved in safety of research reactors and developed in a way that allows them to be incorporated into national laws and regulations. The author reviews the safety standards for research reactors and details their specificities. There are 4 published safety standards: 1) Safety assessment of research reactors and preparation of the safety analysis report (35-G1), 2) Safety in the utilization and modification of research reactors (35-G2), 3) Commissioning of research reactors (NS-G-4.1), and 4) Maintenance, periodic testing and inspection of research reactors (NS-G-4.2). There 5 draft safety standards: 1) Operational limits and conditions and operating procedures for research reactors (DS261), 2) The operating organization and the recruitment, training and qualification of personnel for research reactors (DS325), 3) Radiation protection and radioactive waste management in the design and operation of research reactors (DS340), 4) Core management and fuel handling at research reactors (DS350), and 5) Grading the application of safety requirements for research reactors (DS351). There are 2 planned safety standards, one concerning the ageing management for research reactor and the second deals with the control and instrumentation of research reactors

  7. Worker Safety and Health Issues Associated with the DOE Environmental Cleanup Program: Insights From the DOE Laboratory Directors' Environmental and Occupational/Public health Standards Steering Group

    International Nuclear Information System (INIS)

    M.C. Edelson; Samuel C. Morris; Joan M. Daisey

    2001-01-01

    The U.S. Department of Energy (DOE) Laboratory Directors' Environmental and Occupational/Public Health Standards Steering Group (or ''SSG'') was formed in 1990. It was felt then that ''risk'' could be an organizing principle for environmental cleanup and that risk-based cleanup standards could rationalize clean up work. The environmental remediation process puts workers engaged in cleanup activities at risk from hazardous materials and from the more usual hazards associated with construction activities. In a real sense, the site remediation process involves the transfer of a hypothetical risk to the environment and the public from isolated contamination into real risks to the workers engaged in the remediation activities. Late in its existence the SSG, primarily motivated by its LANL representative, Dr. Harry Ettinger, actively investigated issues associated with worker health and safety during environmental remediation activities. This paper summarizes the insights noted by the SSG. Most continue to be pertinent today

  8. Safety standards for near surface disposal and the safety case and supporting safety assessment for demonstrating compliance with the standards

    International Nuclear Information System (INIS)

    Metcalf, P.

    2003-01-01

    The report presents the safety standards for near surface disposal (ICRP guidance and IAEA standards) and the safety case and supporting safety assessment for demonstrating compliance with the standards. Special attention is paid to the recommendations for disposal of long-lived solid radioactive waste. The requirements are based on the principle for the same level of protection of future individuals as for the current generation. Two types of exposure are considered: human intrusion and natural processes and protection measures are discussed. Safety requirements for near surface disposal are discussed including requirements for protection of human health and environment, requirements or safety assessments, waste acceptance and requirements etc

  9. Occupational safety among dental health-care workers

    Directory of Open Access Journals (Sweden)

    Shigehiro Shimoji

    2010-10-01

    Full Text Available Shigehiro Shimoji1, Kohji Ishihama1,2, Hidefumi Yamada1, Masaki Okayama1, Kouichi Yasuda1,3, Tohru Shibutani3,4, Tadashi Ogasawara2,5, Hiroo Miyazawa2,3, Kiyofumi Furusawa11Department of Oral and Maxillofacial Surgery, Matsumoto Dental University, Shiojiri, Japan; 2Infection Control Team, 3Risk Management Working Team, Matsumoto Dental University Hospital, Shiojiri, Japan; 4Department of Dental Anesthesiology, 5Department of Special Care Dentistry, Matsumoto Dental University, Shiojiri, JapanAbstract: Compared to other health-care workers, dental health-care workers come in close contact with patients and use a variety of sharp and high-speed rotating instruments. It is important to understand the characteristics of the occupational accidents that occur. We reviewed incident reports from April 1, 2005, to March 31, 2010, at Matsumoto Dental University Hospital. In addition, questionnaires dealing with identification of occupational safety issues, especially splash exposures, were conducted for dentists, dental hygienists, and nurses. Thirty-two occupational injuries were reported during the study period, including 23 sharp instrument injuries (71.9%, 6 splash exposures (18.8%, and 3 others. Of the six splash exposures, only two cases involved potential contamination with blood or other potentially infectious patient material. Of the 66 workers who experienced sharps injuries, 20 workers (30.3%, 20/66 reported them to the hospital work safety team. The questionnaire revealed high incident of splash exposures and conjunctiva exposures: 87.9% (51/58 and 60.3% (35/58 in dentists and 88.6% (39/44 and 61.4% (27/44 in dental hygienists. The compliance rate for routine use of protective eyewear was 60.3% (35/58 for dentists and 34.1% (15/44 for hygienists. Of the presented informational items included in the questionnaire, those that strongly persuaded respondents to use protective eyewear were ‘splatters from the patient’s mouth contain blood

  10. Employers' perceptions and attitudes toward the Canadian national standard on psychological health and safety in the workplace: A qualitative study.

    Science.gov (United States)

    Kunyk, Diane; Craig-Broadwith, Morgan; Morris, Heather; Diaz, Ruth; Reisdorfer, Emilene; Wang, JianLi

    2016-01-01

    The estimated societal and economic costs of mental illness and psychological injury in the workplace is staggering. Governments, employers and other stakeholders have been searching for policy solutions. This qualitative, exploratory study sought to uncover organizational receptivity to a voluntary comprehensive standard for dealing with psychological health and safety in the workplace. A series of five focus groups were conducted in a large Western Canadian city in November 2013. The seventeen participants were from the fields of healthcare, construction/utilities, manufacturing industries, business services, and finance. They worked in positions of management, consulting, human resources, health promotion, health and safety, mediation, and occupational health and represented organizations ranging in size from 20 to 100,000 employees. The findings confirm and illustrate the critical role that psychological health and safety plays across workplaces and occupations. This standard resonated across the represented organizations and fit with their values. This alignment posed challenges with articulating its added value. There appears to be a need for simplified engagement and implementation strategies of the standard that can be tailored to the nuanced differences between types and sizes of industries. It appears that organizations in the most need of improving psychological health and safety may be the least receptive. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Extending Occupational Health and Safety to Urban Street Vendors: Reflections From a Project in Durban, South Africa.

    Science.gov (United States)

    Alfers, Laura; Xulu, Phumzile; Dobson, Richard; Hariparsad, Sujatha

    2016-08-01

    This article focuses on an action-research project which is attempting to extend occupational health and safety to a group of street traders in Durban, South Africa, using a variety of different (and sometimes unconventional) institutional actors. The article is written from the perspective of key people who have played a role in conceptualizing and administering the project and is intended to deepen the conversation about what it means to extend occupational health to the informal economy. It explores this question through a reflection on three key project activities: the setting up of a trader-led health and safety committee, an occupational health and safety training course, and a clinical health assessment. It concludes with a discussion of the issues that emerge from the reflections of project participants, which include the need to bring occupational health and urban health into closer conversation with one another, the need to be cognizant of local "informal" politics and the impact that has on occupational health and safety interventions, and the need to create greater opportunities for occupational health and safety professionals to interact with workers in the informal economy. © The Author(s) 2016.

  12. Self arrangements in occupational safety and health management

    International Nuclear Information System (INIS)

    Ismail Bahari

    2002-01-01

    The book is written with the awareness of safe work culture where success does not lie to compliance with the law only. Instead it is more of an excellent management based on the principle of self organization. Self arrangements in the management of occupational safety and health do not rest on the shoulders of the employer or the safety management and safety communities, but are committed together with the leadership of the employer. Self arrangements will be more meaningful and successful if those involved have knowledge about the philosophy and principles of why and how this management is done, and so the method can be practiced and eventually cultivated as a working system. (author)

  13. Integrating teamwork, clinician occupational well-being and patient safety - development of a conceptual framework based on a systematic review.

    Science.gov (United States)

    Welp, Annalena; Manser, Tanja

    2016-07-19

    There is growing evidence that teamwork in hospitals is related to both patient outcomes and clinician occupational well-being. Furthermore, clinician well-being is associated with patient safety. Despite considerable research activity, few studies include all three concepts, and their interrelations have not yet been investigated systematically. To advance our understanding of these potentially complex interrelations we propose an integrative framework taking into account current evidence and research gaps identified in a systematic review. We conducted a literature search in six major databases (Medline, PsycArticles, PsycInfo, Psyndex, ScienceDirect, and Web of Knowledge). Inclusion criteria were: peer reviewed papers published between January 2000 and June 2015 investigating a statistical relationship between at least two of the three concepts; teamwork, patient safety, and clinician occupational well-being in hospital settings, including practicing nurses and physicians. We assessed methodological quality using a standardized rating system and qualitatively appraised and extracted relevant data, such as instruments, analyses and outcomes. The 98 studies included in this review were highly diverse regarding quality, methodology and outcomes. We found support for the existence of independent associations between teamwork, clinician occupational well-being and patient safety. However, we identified several conceptual and methodological limitations. The main barrier to advancing our understanding of the causal relationships between teamwork, clinician well-being and patient safety is the lack of an integrative, theory-based, and methodologically thorough approach investigating the three concepts simultaneously and longitudinally. Based on psychological theory and our findings, we developed an integrative framework that addresses these limitations and proposes mechanisms by which these concepts might be linked. Knowledge about the mechanisms underlying the

  14. Occupational health and safety issues affecting young workers: a literature review.

    Science.gov (United States)

    Laberge, Marie; Ledoux, Elise

    2011-01-01

    Many overview articles, reports, book chapters and literature reviews have examined the health and safety of young workers. These sources discuss the relationships between the work conditions of young workers and the various indicators of accidents and occupational diseases. Breslin et al. [12,13] conducted two literature reviews of quantitative studies to determine which factors best predicted work accidents and occupational disorders in young people. The present article proposes a review of young people's occupational health and safety (OHS) factors (e.g., demographic, individual, professional, organizational, temporal and operational factors) in both qualitative and quantitative studies. Five types of problems were analyzed in greater depth, namely MSD symptoms, respiratory, allergy and toxicological problems, mental health and well-being, alcohol and drug consumption, and fatigue. This review likewise examines related dimensions that allow us to adopt a more global perspective on this subject by considering such elements as young people's values, their knowledge and attitudes, safety practices in companies, the safe integration of young people, and rehabilitation. A total of 189 scientific articles were selected on the basis of certain criteria. These articles came from refereed OHS journals published between 1994 and 2005.

  15. H.R. 2098: This Act may be cited as the Nuclear Facilities Occupational Safety Improvement Act of 1991, introduced in the US House of Representatives, One Hundred Second Congress, First Session, April 25, 1991

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    Worker health and safety at Department of Energy nuclear facilities could be made substantially safer by applying standards developed by experts in the field of occupational health and safety. This bill was introduced into the US House of Representatives on April 25, 1991 to amend the Occupational Safety and Health Act of 1970 to improve and enforce standards for employee health and safety at Department of Energy nuclear facilities. Individual sections address the following: application of OSHA to DOE nuclear facilities; cooperation with inspections and investigations; transfer and allocation of appropriations and personnel; worker training requirements; performance of NIOSH functions at DOE nuclear facilities; medical examinations of employees at DOE nuclear facilities; and labor-management health and safety committees at Doe nuclear facilities

  16. New Radiation Safety Standards of the Russian Federation

    International Nuclear Information System (INIS)

    Kutkov, V.A.

    2001-01-01

    Full text: The new Radiation Safety Standards of the Russian Federation are a first step in an implementation of the 1990 Recommendations of the ICRP into the existing national system of providing a radiation safety of the public. In new System the radiation source is examined as a source of harm and danger for the public. So the System shall include not only the measures for limitation of actual exposures, but also an assessment of efficiency of radiation protection in the practical activity, based on the analysis of a distribution of doses received and on the assessment of actions initiated to restrict the probability of potential exposures. The occupational and public exposure doses are only the indices of the quality of management of the source. In this System a radiation monitoring is a feedback for assessing the stability of the source and how it is controllable. It is a tool for predicting the levels of potential exposure and the relevant danger associated with the source. It is important to underline that the System of Providing a Radiation Safety is an interrelated system. None of its parts may be individually used. In particular, the mere conformity with dose limits is not yet a sufficient evidence of the successful operation of the safety system, because the normal exposure doses reflect only a source-related harm. The problems of implementation of this System of radiation protection and safety into the contemporary practice in the Russia is discussed. (author)

  17. 76 FR 65729 - Board of Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH)

    Science.gov (United States)

    2011-10-24

    ... Recommendations for Respiratory Diseases, Hearing Loss Prevention, Personal Protective Technologies, and Health... Scientific Counselors, National Institute for Occupational Safety and Health (BSC, NIOSH) In accordance with..., and demonstrations relating to occupational safety and health and to mine health. The Board of...

  18. Occupational safety and health issues associated with green building

    NARCIS (Netherlands)

    Terwoert, J.; Ustailieva, E.

    2013-01-01

    This e-fact provides information on the work-related risk factors and the occupational safety and health (OSH) issues associated the planning and construction of green buildings, their maintenance, renovation (retrofitting), demolition, on-site waste collection. Some of these OSH risks are new

  19. Farmworkers at the border: a bilingual initiative for occupational health and safety.

    Science.gov (United States)

    Acosta, Martha Soledad Vela; Sechrest, Lee; Chen, Mei-Kuang

    2009-01-01

    Bilingual and bicultural occupational health and safety interventions for Hispanic farmworkers are extremely rare and, because of language barriers and cultural differences, issues important to their health and safety on the job remain unaddressed. We designed, conducted, and assessed the first bilingual occupational health and safety education program for farmworkers attending High School Equivalency Programs (HEPs). We took an interdisciplinary participatory approach by integrating educators and researchers with a community advisory board to guide development, evaluation, and implementation of Work Safely-Trabaje con Cuidado Curriculum (Curriculum), a bilingual occupational health and safety curriculum. We created a quasi-experimental design using mixed-method evaluation (quantitative and qualitative elements) via pre- and posttest comparisons, follow-up surveys, and focus groups assessing the Curriculum effect on knowledge, safety risk perception (SRP), and safety behavior. Focus groups and follow-up surveys reflected success and acceptance of the Curriculum among participating farmworkers under the study's logic model. Completion of the Curriculum resulted in statistically significant improvements in the combined score of knowledge and SRP at the posttest (p = 0.001) and follow-up survey (p = 0.02) in the intervention group. After completing this study, the Curriculum was permanently adopted by the two high school equivalency sites involved. The participatory approach resulted in integration of community and applied research partnership. The potential to expand use of this Curriculum by other HEP sites can further assess effectiveness and external validity among underserved minority groups.

  20. Utilization of mathematics amongst healthcare students towards problem solving during their occupational safety health internship

    Science.gov (United States)

    Umasenan a/l Thanikasalam

    2017-05-01

    Occupational safety health is a multidisciplinary discipline concentrating on the safety, health and welfare of workers in the working place. Healthcare Students undergoing Occupational Safety Health internships are required to apply mathematical in areas such as safety legislation, safety behavior, ergonomics, chemical safety, OSH practices, industrial hygiene, risk management and safety health practices as problem solving. The aim of this paper is to investigate the level of mathematics and logic utilization from these students during their internship looking at areas of Hazard identification, Determining the population exposed to the hazard, Assessing the risk of the exposure to the hazards and Taking preventive and control. A total of 142 returning healthcare students from their Occupational Safety Health, internship were given a questionnaire to measure their perceptions towards mathematical and logic utilization. The overall results indicated a strong positive skewed result towards the use of Mathematics during their internship. The findings showed that mathematics were well delivered by the students during their internship. Mathematics could not be separated from OSH practice as a needed precision in quantifying safety, health an d welfare of workers in addition to empiricism.

  1. MATURATION PYRAMID OF OCCUPATIONAL HEALTH AND SAFETY

    OpenAIRE

    Perçin, Fatih; Haydan, Eren

    2017-01-01

    Occupational Health and Safety System (OHS) isimportant for governments, employers and workers. Recently, OHS program hasdeveloped day by day and tried to secure working environment. For this purpose,it is necessary that the written job security rulesin the workplace should be internalized by employees, and employers, andgovernment system. Workers can comply from the top to the bottom oforganization and contribute to development of rules through their own personalknowledge, experience, and in...

  2. Occupational safety and health, green chemistry, and sustainability: a review of areas of convergence.

    Science.gov (United States)

    Schulte, Paul A; McKernan, Lauralynn T; Heidel, Donna S; Okun, Andrea H; Dotson, Gary Scott; Lentz, Thomas J; Geraci, Charles L; Heckel, Pamela E; Branche, Christine M

    2013-04-15

    With increasing numbers and quantities of chemicals in commerce and use, scientific attention continues to focus on the environmental and public health consequences of chemical production processes and exposures. Concerns about environmental stewardship have been gaining broader traction through emphases on sustainability and "green chemistry" principles. Occupational safety and health has not been fully promoted as a component of environmental sustainability. However, there is a natural convergence of green chemistry/sustainability and occupational safety and health efforts. Addressing both together can have a synergistic effect. Failure to promote this convergence could lead to increasing worker hazards and lack of support for sustainability efforts. The National Institute for Occupational Safety and Health has made a concerted effort involving multiple stakeholders to anticipate and identify potential hazards associated with sustainable practices and green jobs for workers. Examples of potential hazards are presented in case studies with suggested solutions such as implementing the hierarchy of controls and prevention through design principles in green chemistry and green building practices. Practical considerations and strategies for green chemistry, and environmental stewardship could benefit from the incorporation of occupational safety and health concepts which in turn protect affected workers.

  3. Encyclopaedia of occupational health and safety. V. 1 The body, health care, management and policy. V. 2 Hazards. V. 3 Industries and occupations. V. 4 Guides, indexes, directory. 4. ed.

    International Nuclear Information System (INIS)

    Stellman, J.M.

    1998-01-01

    The Encyclopaedia of Occupational Health and Safety is the authoritative source of information on all aspects of the multidisciplinary field of occupational safety and health; including ionizing radiation. The four volumes of the revised and expanded fourth edition have been arranged in parts and chapters which correspond to the various disciplines comprising the field of occupational safety and health

  4. Sor/88-391, 21 July 1988, uranium mines (Ontario) occupational health and safety regulations, amendment

    International Nuclear Information System (INIS)

    1988-08-01

    These Regulations (SOR/84-435) were made to establish uniformity in the laws governing occupational health and safety in mines in the Province of Ontario. To ensure conformity, the legal references in the Regulations have been amended to accord with the 1987 amendment of the Ontario Occupational Health and Safety Act [fr

  5. THE PLACE OF OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM IN THE INTEGRATED MANAGEMENT SYSTEM

    Directory of Open Access Journals (Sweden)

    Piotr Kafel

    2016-06-01

    Full Text Available The purpose of this paper is to analyze the place of occupational health and safety management system (OHSMS within the integrated management system. Implementation aspects of management systems are discussed, namely the different management system standards used for registration, for example ISO 14001, ISO 9001, OHSAS 18001, ISO 27001, the order in which they were implemented, the time required for each implementation, as well as the scope of integration of these management system standards into a single Integrated Management System and the level of integration. In order to do so, some of the results of a survey carried out in 81 organizations registered to at least two management systems selected from popular international standards, e.g.: ISO 9001, ISO 14001, OHSAS 18001, ISO/IEC 27001, ISO 22000 were used. OHSMS is not the system that is implemented as a first one. Usually it is implemented after or simultaneously with ISO 9001 and ISO 14001 standards. Time of implementation of MSSs in second and further round of implementation is shorter than during the implementation of first standards. There is a higher level of integration of implemented management standards in organizations where one of the standards in OHSMS, than in a companies without OHSMS. The paper analyses those sequences of management systems implementation of safety management systems with other system, that allow organizations to achieve higher levels of integration and presents a possible pattern for the companies initiating the integration process.

  6. Occupational health in Malaysia.

    Science.gov (United States)

    Rampal, Krishna Gopal; Aw, Tar-Ching; Jefferelli, Shamsul Bahrin

    2002-01-01

    This article provides a detailed examination of Malaysian occupational health agencies and their roles in formulating and enforcing standards, promoting occupational health and safety (OSH), and providing advisory services. Available OSH training is described, and the need for policies and personnel in various industries is outlined. Further, the authors discuss how international models and collaboration have influenced Malaysian OSH, and how some successes can be repeated and failures remedied.

  7. Getting home safe and sound: occupational safety and health administration at 38.

    Science.gov (United States)

    Silverstein, Michael

    2008-03-01

    The Occupational Safety and Health Act of 1970 (OSHAct) declared that every worker is entitled to safe and healthful working conditions, and that employers are responsible for work being free from all recognized hazards. Thirty-eight years after these assurances, however, it is difficult to find anyone who believes the promise of the OSHAct has been met. The persistence of preventable, life-threatening hazards at work is a failure to keep a national promise. I review the history of the Occupational Safety and Health Administration and propose measures to better ensure that those who go to work every day return home safe and sound. These measures fall into 6 areas: leverage and accountability, safety and health systems, employee rights, equal protection, framing, and infrastructure.

  8. Standards for radiation protection instrumentation: design of safety standards and testing procedures

    International Nuclear Information System (INIS)

    Meissner, Frank

    2008-01-01

    This paper describes by means of examples the role of safety standards for radiation protection and the testing and qualification procedures. The development and qualification of radiation protection instrumentation is a significant part of the work of TUV NORD SysTec, an independent expert organisation in Germany. The German Nuclear Safety Standards Commission (KTA) establishes regulations in the field of nuclear safety. The examples presented may be of importance for governments and nuclear safety authorities, for nuclear operators and for manufacturers worldwide. They demonstrate the advantage of standards in the design of radiation protection instrumentation for new power plants, in the upgrade of existing instrumentation to nuclear safety standards or in the application of safety standards to newly developed equipment. Furthermore, they show how authorities may proceed when safety standards for radiation protection instrumentation are not yet established or require actualization. (author)

  9. The status of occupational safety among health service providers in ...

    African Journals Online (AJOL)

    identify and bring under control at workplaces all health risks; provide ... on the status of occupational safety among hospital workers in Tanzania. ..... The assistance from the IPC/IS. National ... tions of the Healthcare Infection Prevention.

  10. Creating a Culture of Prevention in Occupational Safety and Health Practice

    OpenAIRE

    Kim, Yangho; Park, Jungsun; Park, Mijin

    2016-01-01

    The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a...

  11. The radiation safety standards programme

    International Nuclear Information System (INIS)

    Bilbao, A.A.

    2000-01-01

    In this lecture the development of radiation safety standards by the IAEA which is a statutory function of the IAEA is presented. The latest editions of the basic safety standards published by the IAEA in cooperation with ICRP, FAO, ILO, NEA/OECD, PAHO and WHO are reviewed

  12. Occupation: nurse; occupational hazard: radiation

    International Nuclear Information System (INIS)

    Nickson, K.

    1984-01-01

    The work of the occupational health nurses at the Pickering Generating Station is described. A staff of two nurses teach first aid and safety, practice an emergency plan, and monitor personnel for minimum health standards for radiation workers. Special attention is paid to problems which might be aggravated by radiation, such as skin complaints, respiratory diseases, emotional stability, or phobias regarding heights, plastic suits, or radiation itself. Procedures used in treating contaminated personnel are outlined

  13. Occupation: nurse; occupational hazard: radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nickson, K

    1984-03-01

    The work of the occupational health nurses at the Pickering Generating Station is described. A staff of two nurses teach first aid and safety, practice an emergency plan, and monitor personnel for minimum health standards for radiation workers. Special attention is paid to problems which might be aggravated by radiation, such as skin complaints, respiratory diseases, emotional stability, or phobias regarding heights, plastic suits, or radiation itself. Procedures used in treating contaminated personnel are outlined.

  14. Review of Occupational Health and Safety Organization in Expanding Economies: The Case of Southern Africa.

    Science.gov (United States)

    Moyo, Dingani; Zungu, Muzimkhulu; Kgalamono, Spoponki; Mwila, Chimba D

    2015-01-01

    Globally, access to occupational health and safety (OHS) by workers has remained at very low levels. The organization and implementation of OHS in South Africa, Zimbabwe, Zambia, and Botswana has remained at suboptimal levels. Inadequacy of human resource capital, training, and education in the field of OHS has had a major negative impact on the improvement of worker access to such services in expanding economies. South Africa, Zimbabwe, Zambia, and Botswana have expanding economies with active mining and agricultural activities that pose health and safety risks to the working population. A literature review and country systems inquiry on the organization of OHS services in the 4 countries was carried out. Because of the infancy and underdevelopment of OHS in southern Africa, literature on the status of this topic is limited. In the 4 countries under review, OHS services are a function shared either wholly or partially by 3 ministries, namely Health, Labor, and Mining. Other ministries, such as Environment and Agriculture, carry small fragments of OHS function. The 4 countries are at different stages of OHS legislative frameworks that guide the practice of health and safety in the workplace. Inadequacies in human resource capital and expertise in occupational health and safety are noted major constraints in the implementation and compliance to health and safety initiatives in the work place. South Africa has a more mature system than Zimbabwe, Zambia, and Botswana. Lack of specialized training in occupational health services, such as occupational medicine specialization for physicians, has been a major drawback in Zimbabwe, Zambia, and Botswana. The full adoption and success of OHS systems in Southern Africa remains constrained. Training and education in OHS, especially in occupational medicine, will enhance the development and maturation of occupational health in southern Africa. Capacitating primary health services with basic occupational health knowledge would

  15. 75 FR 24746 - Occupational Exposure to Noise Standard; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2010-05-05

    ... workers of a loss in hearing based on comparing audiograms; training workers on the effects of noise... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0017... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA...

  16. THE ETHICS OF OCCUPATIONAL HEALTH AND SAFETY IN TURKEY: RESPONSIBILITY AND CONSENT TO RISK

    OpenAIRE

    Artvinli, Fatih

    2016-01-01

    Work-related diseases, injuries, risks and deaths are the issues that have been recently gaining importance especially in developing countries. The ethical dimensions of occupational health and safety have remained as relatively understudied areas. Concepts such as responsibility, consent, autonomy, paternalism, choice, and certain values or justifications that are used in medical ethics and bioethics are also applicable to occupational health and safety. This article examines the ethical iss...

  17. Positioning radiation safety in occupational safety and health programme in an organization

    International Nuclear Information System (INIS)

    Abed Bin Onn

    2000-01-01

    The Atomic Energy Licensing Act 1984, which is under purview of the Ministry of Science, Technology and Environment, and Occupational Safety and Health Act, OSHA 1994, under Ministry of Human Resources were discussed. RPO responsibilities were discussed in detailed. As the conclusion, organization which complies with the provisions of the AELA 1984 are well on the way to complying the requirements of OSHA 1994

  18. Status and trends in IAEA safety standards

    International Nuclear Information System (INIS)

    Lipar, M.

    2004-01-01

    While safety is a national responsibility, international standards and approaches to safety promote consistency and facilitate international technical co-operation and trade, and help to provide assurance that nuclear and radiation related technologies are used safely. The standards also provide support for States in meeting their international obligations. One general international obligation is that a State must not pursue activities that cause damage in another State. More specific obligations on Contracting States are set out in international safety related conventions. The internationally agreed IAEA safety standards provide the basis for States to demonstrate that they are meeting these obligations. These standards are founded in the IAEA's Statute, which authorizes the Agency to establish standards of safety for nuclear and radiation related facilities and activities and to provide for their application. The safety standards reflect an international consensus on what constitutes a high level of safety for protecting people and the environment. (orig.) [de

  19. Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations.

    Science.gov (United States)

    Castleman, Barry; Allen, Barbara; Barca, Stefania; Bohme, Susanna Rankin; Henry, Emmanuel; Kaur, Amarjit; Massard-Guilbaud, Genvieve; Melling, Joseph; Menendez-Navarro, Alfredo; Renfrew, Daniel; Santiago, Myrna; Sellers, Christopher; Tweedale, Geoffrey; Zalik, Anna; Zavestoski, Stephen

    2008-01-01

    At a conference held at Stony Brook University in December 2007, "Dangerous Trade: Histories of Industrial Hazard across a Globalizing World," participants endorsed a Code of Sustainable Practice in Occupational and Environmental Health and Safety for Corporations. The Code outlines practices that would ensure corporations enact the highest health and environmentally protective measures in all the locations in which they operate. Corporations should observe international guidelines on occupational exposure to air contaminants, plant safety, air and water pollutant releases, hazardous waste disposal practices, remediation of polluted sites, public disclosure of toxic releases, product hazard labeling, sale of products for specific uses, storage and transport of toxic intermediates and products, corporate safety and health auditing, and corporate environmental auditing. Protective measures in all locations should be consonant with the most protective measures applied anywhere in the world, and should apply to the corporations' subsidiaries, contractors, suppliers, distributors, and licensees of technology. Key words: corporations, sustainability, environmental protection, occupational health, code of practice.

  20. A study of leading indicators for occupational health and safety management systems in healthcare.

    Science.gov (United States)

    Almost, Joan M; VanDenKerkhof, Elizabeth G; Strahlendorf, Peter; Caicco Tett, Louise; Noonan, Joanna; Hayes, Thomas; Van Hulle, Henrietta; Adam, Ryan; Holden, Jeremy; Kent-Hillis, Tracy; McDonald, Mike; Paré, Geneviève C; Lachhar, Karanjit; Silva E Silva, Vanessa

    2018-04-23

    In Ontario, Canada, approximately $2.5 billion is spent yearly on occupational injuries in the healthcare sector. The healthcare sector has been ranked second highest for lost-time injury rates among 16 Ontario sectors since 2009 with female healthcare workers ranked the highest among all occupations for lost-time claims. There is a great deal of focus in Ontario's occupational health and safety system on compliance and fines, however despite this increased focus, the injury statistics are not significantly improving. One of the keys to changing this trend is the development of a culture of healthy and safe workplaces including the effective utilization of leading indicators within Occupational Health and Safety Management Systems (OHSMSs). In contrast to lagging indicators, which focus on outcomes retrospectively, a leading indicator is associated with proactive activities and consists of selected OHSMSs program elements. Using leading indicators to measure health and safety has been common practice in high-risk industries; however, this shift has not occurred in healthcare. The aim of this project is to conduct a longitudinal study implementing six elements of the Ontario Safety Association for Community and Healthcare (OSACH) system identified as leading indicators and evaluating the effectiveness of this intervention on improving selected health and safety workplace indicators. A quasi-experimental longitudinal research design will be used within two Ontario acute care hospitals. The first phase of the study will focus on assessing current OHSMSs using the leading indicators, determining potential facilitators and barriers to changing current OHSMSs, and identifying the leading indicators that could be added or changed to the existing OHSMS in place. Phase I will conclude with the development of an intervention designed to support optimizing current OHSMSs in participating hospitals based on identified gaps. Phase II will pilot test and evaluate the tailored

  1. Regulation of occupational health and safety in the semiconductor industry: enforcement problems and solutions.

    Science.gov (United States)

    Watterson, Andrew

    2006-01-01

    Reports of high incidences of occupational illnesses in the semiconductor industry should have triggered global investigations and rigorous inspection of the industry. Yet semiconductor plants remain essentially unregulated. Health and safety standards are inadequate and enforcement is lax. Roles for stakeholders in laying down good practice, monitoring, and regulating are proposed, and obstacles are described. Effective regulation has advantages for the industry as well as workers. Conditions for best practice include education at all levels, protection and support for labor inspectors, government commitment to enforcing laws, recognition of the right of workers to organize, and recognition of their rights.

  2. Assessment of occupational health and safety hazard exposures among working college students.

    Science.gov (United States)

    Balanay, Jo Anne G; Adesina, Adepeju; Kearney, Gregory D; Richards, Stephanie L

    2014-01-01

    Adolescents and young adults have higher injury rates than their adult counterparts in similar jobs. This study used the working college student population to assess health and safety hazards in the workplace, characterize related occupational diseases and injuries, and describe worker health/safety activities provided by employers. College students (≥17 years old) were assessed via online surveys about work history, workplace exposure to hazards, occupational diseases/injuries, and workplace health/safety activities. Approximately half (51%) of participants (n = 1,147) were currently employed at the time of the survey or had been employed while enrolled in college. Restaurants (other than fast food) were the most frequently reported work setting. The most reported workplace hazards included noise exposure and contact with hot liquids/surfaces. Twenty percent of working students experienced injury at work; some injuries were severe enough to limit students' normal activities for >3 days (30%) or require medical attention (44%). Men had significantly higher prevalence of injuries (P = 0.05) and near-misses (P safety training and half were given personal protective equipment (PPE) by their employers. Risk reduction from workplace injuries and illnesses among working college students may be achieved by implementing occupational health and safety (OHS) strategies including incorporation of OHS in the college curriculum, promotion of OHS by university/college student health services, and improving awareness of OHS online resources among college students, employers, and educators. © 2013 Wiley Periodicals, Inc.

  3. Occupational chemical exposures: a collaboration between the Georgia Poison Center and the Occupational Safety and Health Administration.

    Science.gov (United States)

    Tustin, Aaron W; Jones, Alison; Lopez, Gaylord P; Ketcham, Glenn R; Hodgson, Michael J

    2018-01-01

    In the United States, regional poison centers frequently receive calls about toxic workplace exposures. Most poison centers do not share call details routinely with governmental regulatory agencies. Worker health and safety could be enhanced if regulators such as the Occupational Safety and Health Administration (OSHA) had the ability to investigate these events and prevent similar incidents. With this goal in mind, the Georgia Poison Center (GPC) began referring occupational exposures to OSHA in July 2014. GPC began collecting additional employer details when handling occupational exposure calls. When workers granted permission, GPC forwarded call details to the OSHA Regional Office in Atlanta. These referrals enabled OSHA to initiate several investigations. We also analyzed all occupational exposures reported to GPC during the study period to characterize the events, detect violations of OSHA reporting requirements, and identify hazardous scenarios that could form the basis for future OSHA rulemaking or guidance. GPC was informed about 953 occupational exposures between 1 July, 2014 and 7 January, 2016. Workers were exposed to 217 unique substances, and 70.3% of victims received treatment in a healthcare facility. Hydrogen sulfide was responsible for the largest number of severe clinical effects. GPC obtained permission to refer 89 (9.3%) calls to OSHA. As a result of these referrals, OSHA conducted 39 investigations and cited 15 employers for "serious" violations. OSHA forwarded several other referrals to other regulatory agencies when OSHA did not have jurisdiction. At least one employer failed to comply with OSHA's new rule that mandates reporting of all work-related hospitalizations. This collaboration increased OSHA's awareness of dangerous job tasks including hydrofluoric acid exposure among auto detailers and carbon monoxide poisoning with indoor use of gasoline-powered tools. Collaboration with the GPC generated a useful source of referrals to OSHA. OSHA

  4. Development of fusion safety standards

    International Nuclear Information System (INIS)

    Longhurst, G.R.; Petti, D.A.; Dinneen, G.A.; Herring, J.S.; DeLooper, J.; Levine, J.D.; Gouge, M.J.

    1996-01-01

    Two new U.S. Department of Energy (DOE) standards have been prepared to assist in the design and regulation of magnetic fusion facilities. They are DOE-STD-6002-96, 'Safety of Magnetic Fusion Facilities - Requirements,' and DOE-STD-6003-96 'Safety of Magnetic Fusion Facilities - Guidance.' The first standard sets forth requirements, mostly based on the Code of Federal Regulations, deemed necessary for the safe design and operation of fusion facilities and a set of safety principles to use in the design. The second standard provides guidance on how to meet the requirements identified in DOE-STD-6002-96. It is written specifically for a facility such as the International Thermonuclear Experimental Reactor (ITER) in the DOE regulatory environment. As technical standards, they are applicable only to the extent that compliance with these standards is included in the contracts of the developers. 7 refs., 1 fig

  5. Occupational safety among dental health-care workers

    Science.gov (United States)

    Shimoji, Shigehiro; Ishihama, Kohji; Yamada, Hidefumi; Okayama, Masaki; Yasuda, Kouichi; Shibutani, Tohru; Ogasawara, Tadashi; Miyazawa, Hiroo; Furusawa, Kiyofumi

    2010-01-01

    Compared to other health-care workers, dental health-care workers come in close contact with patients and use a variety of sharp and high-speed rotating instruments. It is important to understand the characteristics of the occupational accidents that occur. We reviewed incident reports from April 1, 2005, to March 31, 2010, at Matsumoto Dental University Hospital. In addition, questionnaires dealing with identification of occupational safety issues, especially splash exposures, were conducted for dentists, dental hygienists, and nurses. Thirty-two occupational injuries were reported during the study period, including 23 sharp instrument injuries (71.9%), 6 splash exposures (18.8%), and 3 others. Of the six splash exposures, only two cases involved potential contamination with blood or other potentially infectious patient material. Of the 66 workers who experienced sharps injuries, 20 workers (30.3%, 20/66) reported them to the hospital work safety team. The questionnaire revealed high incident of splash exposures and conjunctiva exposures: 87.9% (51/58) and 60.3% (35/58) in dentists and 88.6% (39/44) and 61.4% (27/44) in dental hygienists. The compliance rate for routine use of protective eyewear was 60.3% (35/58) for dentists and 34.1% (15/44) for hygienists. Of the presented informational items included in the questionnaire, those that strongly persuaded respondents to use protective eyewear were ‘splatters from the patient’s mouth contain blood’ (90%, 99/110) and ‘dental operations at our clinic are performed based only on a questionnaire without serious examinations for HBV, HCV, and HIV’ (71.8%, 79/110). The reason of low compliance of protective eyewear among dentists might relate to fine dental procedures. Appropriate information is important for the motive of wearing personal protective equipment, and an early educational program may have a potential to increase compliance with the use of that equipment. PMID:23745061

  6. Interpreting MSHA citations through the lens of occupational health and safety management systems: investigating their impact on mine injuries and illnesses 2003-2010.

    Science.gov (United States)

    Yorio, Patrick L; Willmer, Dana R; Haight, Joel M

    2014-08-01

    Since the late 1980s, the U.S. Department of Labor has considered regulating a systems approach to occupational health and safety management. Recently, a health and safety management systems (HSMS) standard has returned to the regulatory agenda of both the Occupational Safety and Health Administration (OSHA) and the Mine Safety and Health Administration (MSHA). Because a mandated standard has implications for both industry and regulating bodies alike, it is imperative to gain a greater understanding of the potential effects that an HSMS regulatory approach can have on establishment-level injuries and illnesses. Through the lens of MSHA's regulatory framework, we first explore how current enforcement activities align with HSMS elements. Using MSHA data for the years 2003-2010, we then analyze the relationship between various types of enforcement activities (e.g., total number of citations, total penalty amount, and HSMS-aligned citations) and mine reportable injuries. Our findings show that the reduction in mine reportable injuries predicted by increases in MSHA enforcement ranges from negligible to 18%. The results suggest that the type and focus of the enforcement activity may be more important for accident reduction than the total number of citations issued and the associated penalty amount. © 2014 Society for Risk Analysis.

  7. NEG and NIOSH basis for an occupational health standard: 2-diethylaminoethanol

    Energy Technology Data Exchange (ETDEWEB)

    Toren, K.

    1996-05-01

    Health effects associated with occupational exposure to 2-diethylaminoethanol (DEAE) were reviewed as part of the agreement between NIOSH and the Nordic Expert Group for Criteria Documentation of Health Risks from Chemicals to exchange information and expertise in the area of occupational safety and health to provide a scientific basis for the establishment of recommended occupational exposure limits. The occurrence, use, pharmacokinetics, toxicology, immunotoxicity and organ systems, mutagenic, genotoxic, carcinogenic, and reproductive effects of DEAE were reviewed. Three reports of clusters of cases associated with DEAE exposure were described, as were studies examining the dose response relationship of DEAE in humans and experimental animals.

  8. Occupational exposures worldwide and revision of international standards for protection

    International Nuclear Information System (INIS)

    Czarwinski, R.; Crick, M. J.

    2011-01-01

    United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) has become the world authority on the levels and effects of ionising radiation. Since 1975, UNSCEAR has evaluated inter alia the level of occupational exposure worldwide. Based on revised questionnaires, more detailed information is now available. The results of the last evaluation (1995-2002) will be shown in the paper. Lessons learned from the responses by UN Member States will be given, as well as an outline of plans for data collection in future cycles. The requirements for protection against exposure to ionising radiation of workers, the public and patients are established in the International Basic Safety Standards for Protection against Ionising Radiation and for the Safety of Radiation Sources (BSS), published in 1996. As a result of a review of the BSS in 2006, the International Atomic Energy Agency (IAEA) started a process for the revision of these standards in 2007. International organisations including the joint sponsoring organisations of the BSS-IAEA, FAO, ILO, OECD/NEA, PAHO and WHO-as well as potential new joint sponsoring organisations of the revised BSS-the European Commission and UNEP-were involved from the beginning in the revision process. The paper also provides a summary of the status of the Draft Revised BSS and describes the new format. The paper focuses, in particular, on requirements for the protection of workers as well as record keeping requirements, which provide the legal basis for the collection of specific data; these data are of the type that can be used by UNSCEAR. (authors)

  9. Does unbelted safety requirement affect protection for belted occupants?

    Science.gov (United States)

    Hu, Jingwen; Klinich, Kathleen D; Manary, Miriam A; Flannagan, Carol A C; Narayanaswamy, Prabha; Reed, Matthew P; Andreen, Margaret; Neal, Mark; Lin, Chin-Hsu

    2017-05-29

    Federal regulations in the United States require vehicles to meet occupant performance requirements with unbelted test dummies. Removing the test requirements with unbelted occupants might encourage the deployment of seat belt interlocks and allow restraint optimization to focus on belted occupants. The objective of this study is to compare the performance of restraint systems optimized for belted-only occupants with those optimized for both belted and unbelted occupants using computer simulations and field crash data analyses. In this study, 2 validated finite element (FE) vehicle/occupant models (a midsize sedan and a midsize SUV) were selected. Restraint design optimizations under standardized crash conditions (U.S.-NCAP and FMVSS 208) with and without unbelted requirements were conducted using Hybrid III (HIII) small female and midsize male anthropomorphic test devices (ATDs) in both vehicles on both driver and right front passenger positions. A total of 10 to 12 design parameters were varied in each optimization using a combination of response surface method (RSM) and genetic algorithm. To evaluate the field performance of restraints optimized with and without unbelted requirements, 55 frontal crash conditions covering a greater variety of crash types than those in the standardized crashes were selected. A total of 1,760 FE simulations were conducted for the field performance evaluation. Frontal crashes in the NASS-CDS database from 2002 to 2012 were used to develop injury risk curves and to provide the baseline performance of current restraint system and estimate the injury risk change by removing the unbelted requirement. Unbelted requirements do not affect the optimal seat belt and airbag design parameters in 3 out of 4 vehicle/occupant position conditions, except for the SUV passenger side. Overall, compared to the optimal designs with unbelted requirements, optimal designs without unbelted requirements generated the same or lower total injury risks for

  10. Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

    Science.gov (United States)

    Pavlov, Arkhip; Gavrilov, Dmitrij

    2017-11-01

    This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

  11. Improvement And Development Of The Motivation System In The Occupational And Industrial Safety Field

    Directory of Open Access Journals (Sweden)

    Pavlov Arkhip

    2017-01-01

    Full Text Available This paper discusses one of the main problems in labour and industrial management in the occupational and industrial safety field - motivation to work safely. The problem is complex and should be solved by a set of measures, where the assignment of responsibility to employees for the results of their work is absent, including in the field of labour protection and industrial safety. In accordance with the obligatory management principles, employees' work resolves to the strict implementation of the actions prescribed by the regulations. The responsibility for the negative result rests with the person who enacted or instructs employees. Thus, the employee is practically exempt from responsibility for the final result. One of the possible solutions to this problem is to put an assignment of responsibility on the employees for the results of their activities also in the occupational and industrial safety field. This is illustrated by the experience of other states, particularly of Australia. In conclusion suggestions for improvement and development of the motivation system in the field of occupational and industrial safety.

  12. Worker Safety and Health Issues Associated with the DOE Environmental Cleanup Program: Insights From the DOE Laboratory Directors' Environmental and Occupational/Public health Standards Steering Group

    Energy Technology Data Exchange (ETDEWEB)

    M.C. Edelson; Samuel C. Morris; Joan M. Daisey

    2001-03-01

    The U.S. Department of Energy (DOE) Laboratory Directors' Environmental and Occupational/Public Health Standards Steering Group (or ''SSG'') was formed in 1990. It was felt then that ''risk'' could be an organizing principle for environmental cleanup and that risk-based cleanup standards could rationalize clean up work. The environmental remediation process puts workers engaged in cleanup activities at risk from hazardous materials and from the more usual hazards associated with construction activities. In a real sense, the site remediation process involves the transfer of a hypothetical risk to the environment and the public from isolated contamination into real risks to the workers engaged in the remediation activities. Late in its existence the SSG, primarily motivated by its LANL representative, Dr. Harry Ettinger, actively investigated issues associated with worker health and safety during environmental remediation activities. This paper summarizes the insights noted by the SSG. Most continue to be pertinent today.

  13. [B-BS and occupational health and safety management systems].

    Science.gov (United States)

    Bacchetta, Adriano Paolo

    2010-01-01

    The objective of a SGSL is the "prevention" agreement as approach of "pro-active" toward the safety at work through the construction of an integrated managerial system in synergic an dynamic way with the business organization, according to continuous improvement principles. Nevertheless the adoption of a SGSL, not could guarantee by itself the obtainment of the full effectiveness than projected and every individual's adhesion to it, must guarantee it's personal involvement in proactive way, so that to succeed to actual really how much hypothesized to systemic level to increase the safety in firm. The objective of a behavioral safety process that comes to be integrated in a SGSL, it has the purpose to succeed in implementing in firm a process of cultural change that raises the workers social group fundamental safety value, producing an ample and full involvement of all in the activities of safety at work development. SGSL = Occupational Health and Safety Management System.

  14. The international dimensions of nuclear safety standards

    International Nuclear Information System (INIS)

    Reed, J.M.

    1992-01-01

    The paper reviews the activities of the major international organisations in the field of nuclear safety standards; the International Atomic Energy Agency (IAEA), the OECD's Nuclear Energy Agency (NEA) and the Commission of the European Communities. Each organisation encourages the concept of international nuclear safety standards. After Chernobyl, there were calls for some form of binding international nuclear safety standards. Many Member States of IAEA accepted these Codes as a suitable basis for formulating their national safety standards, but the prevailing view was that voluntary compliance with the Codes was the preferred path. With few reactor vendors in a limited international market, the time may be approaching when an internationally licensable nuclear reactor is needed. Commonly accepted safety standards would be a prerequisite. The paper discusses the issues involved and the complexities of standards making in the international arena. (author)

  15. 75 FR 65018 - National Institute for Occupational Safety and Health; Designation of a Class of Employees for...

    Science.gov (United States)

    2010-10-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... aggregating at least 250 work days, occurring either solely under this employment, or in combination with work...

  16. 75 FR 57024 - National Institute for Occupational Safety and Health; Designation of a Class of Employees for...

    Science.gov (United States)

    2010-09-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... number of work days aggregating at least 250 work days, occurring either solely under this employment or...

  17. 75 FR 32783 - National Institute for Occupational Safety and Health; Designation of a Class of Employees for...

    Science.gov (United States)

    2010-06-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health... Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS). ACTION: Notice. SUMMARY... aggregating at least 250 work days, occurring either solely under this employment or in combination with work...

  18. Occupational Health and Safety. Numeracy. Level 1. Level 2. Level 3. Support Materials for Agricultural Training.

    Science.gov (United States)

    Batman, Kangan; Tully, Chris

    This publication contains the three numeracy units of the three levels of Support Materials for Agricultural Training (SMAT) in the area of occupational health and safety: Level 1 (starting), 2 (continuing), and 3 (completing). The units are designed to help the learner improve his or her numeracy skills needed to deal with occupational safety and…

  19. Multimedia for occupational safety and health training: a pilot study examining a multimedia learning theory.

    Science.gov (United States)

    Wallen, Erik S; Mulloy, Karen B

    2006-10-01

    Occupational diseases are a significant problem affecting public health. Safety training is an important method of preventing occupational illness. Training is increasingly being delivered by computer although theories of learning from computer-based multimedia have been tested almost entirely on college students. This study was designed to determine whether these theories might also be applied to safety training applications for working adults. Participants viewed either computer-based multimedia respirator use training with concurrent narration, narration prior to the animation, or unrelated safety training. Participants then took a five-item transfer test which measured their ability to use their knowledge in new and creative ways. Participants who viewed the computer-based multimedia trainings both did significantly better than the control group on the transfer test. The results of this pilot study suggest that design guidelines developed for younger learners may be effective for training workers in occupational safety and health although more investigation is needed.

  20. THE ETHICS OF OCCUPATIONAL HEALTH AND SAFETY IN TURKEY: RESPONSIBILITY AND CONSENT TO RISK.

    Science.gov (United States)

    Artvinli, Fatih

    2016-06-01

    Work-related diseases, injuries, risks and deaths are the issues that have been recently gaining importance especially in developing countries. The ethical dimensions of occupational health and safety have remained as relatively understudied areas. Concepts such as responsibility, consent, autonomy, paternalism, choice, and certain values or justifications that are used in medical ethics and bioethics are also applicable to occupational health and safety. This article examines the ethical issues of responsibility and consent to occupational risk. It will first define the concepts of consent and risk, and then different views on responsibility and consent to risk will be discussed. The article will also examine the responsibility of the society and government regarding these concepts.

  1. Integrating Occupational Safety and Health into TAFE Courses: Policy Guidelines.

    Science.gov (United States)

    Hill, Graham L.; Mageean, Pauline

    Intended to help administrators, curriculum developers, and teachers integrate occupational health and safety into Australian vocational courses on bricklaying, metal fabrication, and horticulture, this document suggests specific policies and provides further amplification concerning three general policies for that integration. The three general…

  2. RADWASS update. Radioactive Waste Safety Standards Programme

    International Nuclear Information System (INIS)

    Delattre, D.

    2000-01-01

    By the late 1980s, the issue of radioactive wastes and their management was becoming increasingly politically important. The IAEA responded by establishing a high profile family of safety standards, the Radioactive Waste Safety Standards (RADWASS). By this means, the IAEA intended to draw attention to the fact that well-established procedures for the safe management of radioactive wastes already were in place. The programme was intended to establish an ordered structure for safety documents on waste management and to ensure comprehensive coverage of all relevant subject areas. RADWASS documents are categorized under four subject areas - discharges, predisposal, disposal, and environmental restoration. The programme is overseen through a formalized review and approval mechanism that was established in 1996 for all safety standards activities. The Waste Safety Standards Committee (WASSC) is a standing body of senior regulatory officials with technical expertise in radioactive waste safety. To date, three Safety Requirements and seven Safety Guides have been issued

  3. Is it time to reassess current safety standards for glyphosate-based herbicides?

    Science.gov (United States)

    Vandenberg, Laura N; Blumberg, Bruce; Antoniou, Michael N; Benbrook, Charles M; Carroll, Lynn; Colborn, Theo; Everett, Lorne G; Hansen, Michael; Landrigan, Philip J; Lanphear, Bruce P; Mesnage, Robin; Vom Saal, Frederick S; Welshons, Wade V; Myers, John Peterson

    2017-06-01

    Use of glyphosate-based herbicides (GBHs) increased ∼100-fold from 1974 to 2014. Additional increases are expected due to widespread emergence of glyphosate-resistant weeds, increased application of GBHs, and preharvest uses of GBHs as desiccants. Current safety assessments rely heavily on studies conducted over 30 years ago. We have considered information on GBH use, exposures, mechanisms of action, toxicity and epidemiology. Human exposures to glyphosate are rising, and a number of in vitro and in vivo studies challenge the basis for the current safety assessment of glyphosate and GBHs. We conclude that current safety standards for GBHs are outdated and may fail to protect public health or the environment. To improve safety standards, the following are urgently needed: (1) human biomonitoring for glyphosate and its metabolites; (2) prioritisation of glyphosate and GBHs for hazard assessments, including toxicological studies that use state-of-the-art approaches; (3) epidemiological studies, especially of occupationally exposed agricultural workers, pregnant women and their children and (4) evaluations of GBHs in commercially used formulations, recognising that herbicide mixtures likely have effects that are not predicted by studying glyphosate alone. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  4. S. 1958: This Act may be cited as the Nuclear Facilities Occupational Safety Improvement Act of 1989. Introduced in the Senate of the United States, One Hundredth First Congress, First Session, November 21, 1989

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    S. 1958 is a bill to amend the Occupational Safety and Health Act of 1970 to improve and enforce standards for employee health and safety at Department of Energy nuclear facilities, and for other purposes

  5. Practicing industrial safety - issues involved

    International Nuclear Information System (INIS)

    Gunasekaran, P.

    2016-01-01

    Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

  6. Occupational Exposure to Diagnostic Radiology in Workers without Training in Radiation Safety

    International Nuclear Information System (INIS)

    Gaona, Enrique; Enriquez, Jesus G. Franco

    2004-01-01

    The physicians, technicians, nurses, and others involved in radiation areas constitute the largest group of workers occupationally exposed to man-made sources of radiation. Personnel radiation exposure must be monitored for safety and regulatory considerations, this assessment may need to be made over a period of one month or several months. The purpose of this study was to carry out an exploratory survey of occupational exposures associated with diagnostic radiology. The personnel dosimeters used in this study were thermoluminescent dosimeters (TLDs). The reported number of monitored workers was 110 of different departments of radiology of the Mexican Republic without education in radiation safety, included general fluoscopic/radiographic imaging, computed tomography and mammography procedures. Physicians and X-ray technologist in diagnostic radiology receive an average annual effective dose of 2.9 mSv with range from 0.18 to 5.64 mSv. The average level of occupational exposures is generally similar to the global average level of natural radiation exposure. The annual global per capita effective dose due to natural radiation sources is 2.4 mSv (UNSCEAR 2000 Report). There is not significant difference between average occupational exposures and natural radiation exposure for p < 0.05

  7. Improving Quality and Occupational Safety on Automated Casting Lines

    Directory of Open Access Journals (Sweden)

    Kukla S.

    2017-09-01

    Full Text Available The paper presents a practical example of improving quality and occupational safety on automated casting lines. Working conditions on the line of box moulding with horizontal mould split were analysed due to low degree of automation at the stage of cores or filters installation as well as spheroidizing mortar dosing. A simulation analysis was carried out, which was related to the grounds of introducing an automatic mortar dispenser to the mould. To carry out the research, a simulation model of a line in universal Arena software for modelling and simulation of manufacturing systems by Rockwell Software Inc. was created. A simulation experiment was carried out on a model in order to determine basic parameters of the working system. Organization and working conditions in other sections of the line were also analysed, paying particular attention to quality, ergonomics and occupational safety. Ergonomics analysis was carried out on manual cores installation workplace and filters installation workplace, and changes to these workplaces were suggested in order to eliminate actions being unnecessary and onerous for employees.

  8. The Influence Paths of Emotion on the Occupational Safety of Rescuers Involved in Environmental Emergencies- Systematic Review Article.

    Science.gov (United States)

    Lu, Jintao; Yang, Naiding; Ye, Jinfu; Wu, Haoran

    2014-11-01

    A detailed study and analysis of previous research has been carried out to illustrate the relationships between a range of environmental emergencies, and their effects on the emotional state of the rescuers involved in responding to them, by employing Pub Med, Science Direct, Web of Science, Google Scholar, CNKI and Scopus for required information with the several keywords "emergency rescue", "occupational safety", "natural disaster", "emotional management". The effect of the rescuers' emotion on their occupational safety and immediate and long-term emotional behavior is then considered. From these considerations, we suggested four research propositions related to the emotional effects at both individual and group levels, and to the responsibilities of emergency response agencies in respect of ensuring the psychological and physical occupational safety of rescuers during and after environmental emergencies. An analysis framework is proposed which could be used to study the influence paths of these different aspects of emotional impact on a range of occupational safety issues for rescue workers. The authors believe that the conclusions drawn in this paper can provide a useful theoretical reference for decision-making related to the management and protection of the occupational safety of rescuers responding to natural disasters and environmental emergencies.

  9. Occupational safety and health in the United kingdom: securing future workplace health and wellbeing.

    Science.gov (United States)

    Harrison, John

    2012-01-01

    The industrial revolution that took place in the United Kingdom (UK) between 1760 and 1830 lead to profound social change, with rapid urbanisation associated with squalid living conditions and epidemics of infectious diseases. The next 150 yr or so saw the introduction of many specific acts of health and safety legislation. In 1974 new overarching primary legislation was introduced that would produce a step change in the evolution of health and safety enforcement. In 2004, a new strategy was launched designed to promote a vision embedding health and safety as a cornerstone of a civilised society and to achieve a record of workplace health and safety that leads the world. Good progress in controlling many safety hazards and improving occupational hygiene has been made. There has been a fall in numbers of a wide range of injuries and diseases or illnesses since 2000. The challenge will be to maintain these favourable trends and prepare for new and emerging diseases at a time when resources are diminishing. The importance of occupational health within the UK health and safety strategy has been recognised over the last decade. Occupational health is developing a new paradigm which combines classical health risk management with assessment of workability, rehabilitation back to work and promotion of health and wellbeing. There is an increasing recognition that being in supported employment is good for health and reduces health inequalities.

  10. 78 FR 35559 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Science.gov (United States)

    2013-06-13

    ...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Direct... signage standards by adding references to the latest versions of the American National Standards Institute... earlier ANSI standards, ANSI Z53.1-1967, Z35.1-1968 and Z35.2-1968, in its signage standards, thereby...

  11. Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations

    OpenAIRE

    Iraj Mohammadfam; Mojtaba Kamalinia; Mansour Momeni; Rostam Golmohammadi; Yadollah Hamidi; Alireza Soltanian

    2017-01-01

    Background: Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. Methods: The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified...

  12. A knowledge infrastructure for occupational safety and health.

    Science.gov (United States)

    van Dijk, Frank J H; Verbeek, Jos H; Hoving, Jan L; Hulshof, Carel T J

    2010-12-01

    Occupational Safety and Health (OSH) professionals should use scientific evidence to support their decisions in policy and practice. Although examples from practice show that progress has been made in evidence-based decision making, there is a challenge to improve and extend the facilities that support knowledge translation in practice. A knowledge infrastructure that supports OSH practice should include scientific research, systematic reviews, practice guidelines, and other tools for professionals such as well accessible virtual libraries and databases providing knowledge, quality tools, and good learning materials. A good infrastructure connects facilities with each other and with practice. Training and education is needed for OSH professionals in the use of evidence to improve effectiveness and efficiency. New initiatives show that occupational health can profit from intensified international collaboration to establish a good functioning knowledge infrastructure.

  13. Occupational mental health promotion: a prevention agenda based on education and treatment. The American Psychological Association/National Institute for Occupational Safety and Health, Health Promotion Panel, 1990 Work and Well-Being Conference.

    Science.gov (United States)

    1992-01-01

    PURPOSE OF THE REVIEW. Psychological disorders are one of the 10 leading work-related diseases and injuries in the United States according to the National Institute for Occupational Safety and Health. This article addresses occupational metal health and preventive stress management in the workplace. The individual and organizational costs are briefly considered with concern for reducing the burden of suffering associated with these problems. SEARCH METHOD. As an American Psychological Association interdisciplinary panel, we searched the psychological, medical, public health, and organizational literature. We selected articles relevant to the problem of psychological disorders in the workplace and to enhancing occupational mental health and preventive stress management. IMPORTANT FINDINGS. The panel proposed a national agenda of education and treatment, combined with a program of evaluation research, for addressing these issues. Target populations are identified, and the need for collaboration among a variety of national constituencies is considered. Advancing occupational mental health and promoting skills in preventive stress management is considered in the context of comprehensive health promotion. MAJOR CONCLUSIONS. The panel concluded that there is a pressing need to: 1) set a 'gold' standard concerning the current state of knowledge in the domains of occupational mental health and stress management; 2) identify Diagnostically Related Groups (DRGs) which are stress-related; 3) establish assessment standards for stress and mental health; 4) set guidelines for reasonable interventions; and 5) establish acceptable post-outcome criteria.

  14. IAEA Safety Standards on Management Systems and Safety Culture

    International Nuclear Information System (INIS)

    Persson, Kerstin Dahlgren

    2007-01-01

    The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

  15. The Effects of Occupational Health and Safety Risk Factors on Job Satisfaction in Hotel Enterprises

    OpenAIRE

    Gonca Kilic; Murat Selim Selvi

    2009-01-01

    Occupational health and safety risk factors can have direct or indirect effects on levels of organizational commitment, job satisfaction, and the job productivity of workers in service companies as well as other types of industries. In this paper, the effects of physical, biological, chemical and socio-psychological risk factors, related to occupational safety and health, encountered in hotel enterprises on job satisfaction were investigated. Questionnaire survey was conducted as a data colle...

  16. On-site Consultation Hearings, Occupational Safety and Health Act. Hearings before the Subcommittee on Manpower, Compensation, and Health and Safety of the Committee on Education and Labor, House of Representatives, Ninety-fourth Congress.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Committee on Education and Labor.

    The hearings consider a bill, H.R. 8618, to amend the Occupational Safety and Health Act of 1970 (OSHA) which would provide on-site consultative services to employers desiring to comply with OSHA standards. H.R. 8616 was introduced to strengthen OSHA by providing an additional program that would encourage employers to voluntarily comply with…

  17. Occupational health and safety policy in the operations of the wood ...

    African Journals Online (AJOL)

    Occupational health and safety policy in the operations of the wood ... 14 randomly selected WPIs located at Ahensan, Asokwa and Kaasi industrial area in Kumasi. ... accidents as a result of inadequate engineering and administrative controls, ...

  18. A systematic review of the effectiveness of occupational health and safety training.

    Science.gov (United States)

    Robson, Lynda S; Stephenson, Carol M; Schulte, Paul A; Amick, Benjamin C; Irvin, Emma L; Eggerth, Donald E; Chan, Stella; Bielecky, Amber R; Wang, Anna M; Heidotting, Terri L; Peters, Robert H; Clarke, Judith A; Cullen, Kimberley; Rotunda, Cathy J; Grubb, Paula L

    2012-05-01

    Training is regarded as an important component of occupational health and safety (OHS) programs. This paper primarily addresses whether OHS training has a beneficial effect on workers. The paper also examines whether higher engagement OHS training has a greater effect than lower engagement training. Ten bibliographic databases were searched for pre-post randomized trial studies published in journals between 1996 and November 2007. Training interventions were included if they were delivered to workers and were concerned with primary prevention of occupational illness or injury. The methodological quality of each relevant study was assessed and data was extracted. The impacts of OHS training in each study were summarized by calculating the standardized mean differences. The strength of the evidence on training's effectiveness was assessed for (i) knowledge, (ii) attitudes and beliefs, (iIi) behaviors, and (iv) health using the US Centers for Disease Control and Prevention's Guide to Community Preventive Services, a qualitative evidence synthesis method. Twenty-two studies met the relevance criteria of the review. They involved a variety of study populations, occupational hazards, and types of training. Strong evidence was found for the effectiveness of training on worker OHS behaviors, but insufficient evidence was found of its effectiveness on health (ie, symptoms, injuries, illnesses). The review team recommends that workplaces continue to deliver OHS training to employees because training positively affects worker practices. However, large impacts of training on health cannot be expected, based on research evidence.

  19. Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US.

    Science.gov (United States)

    Cunningham, Thomas R; Sinclair, Raymond

    2015-01-01

    Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries' planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator-intermediary-small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system.

  20. Application of a model for delivering occupational safety and health to smaller businesses: Case studies from the US

    Science.gov (United States)

    Cunningham, Thomas R.; Sinclair, Raymond

    2015-01-01

    Smaller firms are the majority in every industry in the US, and they endure a greater burden of occupational injuries, illnesses, and fatalities than larger firms. Smaller firms often lack the necessary resources for effective occupational safety and health activities, and many require external assistance with safety and health programming. Based on previous work by researchers in Europe and New Zealand, NIOSH researchers developed for occupational safety and health intervention in small businesses. This model was evaluated with several intermediary organizations. Four case studies which describe efforts to reach small businesses with occupational safety and health assistance include the following: trenching safety training for construction, basic compliance and hazard recognition for general industry, expanded safety and health training for restaurants, and fall prevention and respirator training for boat repair contractors. Successful efforts included participation by the initiator among the intermediaries’ planning activities, alignment of small business needs with intermediary offerings, continued monitoring of intermediary activities by the initiator, and strong leadership for occupational safety and health among intermediaries. Common challenges were a lack of resources among intermediaries, lack of opportunities for in-person meetings between intermediaries and the initiator, and balancing the exchanges in the initiator–intermediary–small business relationships. The model offers some encouragement that initiator organizations can contribute to sustainable OSH assistance for small firms, but they must depend on intermediaries who have compatible interests in smaller businesses and they must work to understand the small business social system. PMID:26300585

  1. Safety standards for wind turbines; Sicherheitsnormen fuer Windenergieanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Boyce, K. [Underwriters Laboratories Inc., Northbrook, IL (United States)

    2012-08-15

    As the global wind infrastructure sustains rapid growth, compliance with relevant standards provide validation of design principles and establish due diligence in addressing critical attributes such as safety. The IEC 61400 series of standards provides important information for addressing safety and performance of wind turbine systems. Efforts to address unique issues within the United States market has led to development of two safety standards, UL 6141 for large wind turbines and UL 6142 for small wind turbines. These standards, which are being published as American National Standards, contain key safety requirements for the electrical system, electrical safety and controls system, grid connection, and related safety issues. In the future, collaborative efforts will lead to continued exchange of best practices and opportunities for broader harmonization. Development of these standards, and their use by the manufacturing community in design and development of wind turbine products, supports maximal safety and performance of the burgeoning wind infrastructure. (orig.)

  2. Awareness of Occupational Injuries and Utilization of Safety Measures among Welders in Coastal South India

    Directory of Open Access Journals (Sweden)

    S Ganesh Kumar

    2013-10-01

    Full Text Available Background: Awareness of occupational hazards and its safety precautions among welders is an important health issue, especially in developing countries. Objective: To assess the awareness of occupational hazards and utilization of safety measures among welders in coastal South India. Methods: A cross-sectional study was conducted among 209 welders in Puducherry, South India. Baseline characteristics, awareness of health hazards, safety measures and their availability to and utilization by the participants were assessed using a pre-tested structured questionnaire. Results: The majority of studied welders aged between 20 and 40 years (n=160, 76.6% and had 1-10 years of education (n=181, 86.6%. They were more aware of hazards (n=174, 83.3% than safety measures (n=134, 64.1%. The majority of studied welders utilized at least one protective measure in the preceding week (n=200, 95.7%. Many of them had more than 5 years of experience (n=175, 83.7%, however, only 20% of them had institutional training (n=40, 19.1%. Age group, education level, and utilization of safety measures were significantly associated with awareness of hazards in univariate analysis (p<0.05. Conclusion: Awareness of occupational hazards and utilization of safety measures is low among welders in coastal South India, which highlights the importance of strengthening safety regulatory services towards this group of workers.

  3. Barriers to occupational health and safety management in small Brazilian enterprises

    OpenAIRE

    Garnica, Guilherme Besse; Barriga, Gladys Dorotea Cacsire

    2018-01-01

    Abstract Paper aims To determine main barriers to the implementation of occupational health and safety management systems OHSMS in the context of small Brazilian enterprises from the perspectives of owners/managers, labor auditors, and OHS consultants. Originality: Survey with three different perspectives on small Brazilian enterprises. Research method: Survey conducted with stakeholders who influence the safety culture in small enterprises to identify the main barriers to the implementati...

  4. Illinois Occupational Skill Standards: HVAC/R Technician Cluster.

    Science.gov (United States)

    Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

    This document, which is intended to serve as a guide for work force preparation program providers, details the Illinois occupational skill standards for programs preparing students for employment in jobs in the heating, ventilation, air conditioning, and refrigeration (HVAC/R) industry. Agency partners involved in this project include: the…

  5. Department of Energy Construction Safety Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  6. Rear seat safety: Variation in protection by occupant, crash and vehicle characteristics.

    Science.gov (United States)

    Durbin, Dennis R; Jermakian, Jessica S; Kallan, Michael J; McCartt, Anne T; Arbogast, Kristy B; Zonfrillo, Mark R; Myers, Rachel K

    2015-07-01

    Current information on the safety of rear row occupants of all ages is needed to inform further advances in rear seat restraint system design and testing. The objectives of this study were to describe characteristics of occupants in the front and rear rows of model year 2000 and newer vehicles involved in crashes and determine the risk of serious injury for restrained crash-involved rear row occupants and the relative risk of fatal injury for restrained rear row vs. front passenger seat occupants by age group, impact direction, and vehicle model year. Data from the National Automotive Sampling System Crashworthiness Data System (NASS-CDS) and Fatality Analysis Reporting System (FARS) were queried for all crashes during 2007-2012 involving model year 2000 and newer passenger vehicles. Data from NASS-CDS were used to describe characteristics of occupants in the front and rear rows and to determine the risk of serious injury (AIS 3+) for restrained rear row occupants by occupant age, vehicle model year, and impact direction. Using a combined data set containing data on fatalities from FARS and estimates of the total population of occupants in crashes from NASS-CDS, logistic regression modeling was used to compute the relative risk (RR) of death for restrained occupants in the rear vs. front passenger seat by occupant age, impact direction, and vehicle model year. Among all vehicle occupants in tow-away crashes during 2007-2012, 12.3% were in the rear row where the overall risk of serious injury was 1.3%. Among restrained rear row occupants, the risk of serious injury varied by occupant age, with older adults at the highest risk of serious injury (2.9%); by impact direction, with rollover crashes associated with the highest risk (1.5%); and by vehicle model year, with model year 2007 and newer vehicles having the lowest risk of serious injury (0.3%). Relative risk of death was lower for restrained children up to age 8 in the rear compared with passengers in the right

  7. Implementation of the INEEL safety analyst training standard

    International Nuclear Information System (INIS)

    Hochhalter, E. E.

    2000-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) safety analysis units at the Idaho National Engineering and Environmental Laboratory (INEEL) are in the process of implementing the recently issued INEEL Safety Analyst Training Standard (STD-1107). Safety analyst training and qualifications are integral to the development and maintenance of core safety analysis capabilities. The INEEL Safety Analyst Training Standard (STD-1107) was developed directly from EFCOG Training Subgroup draft safety analyst training plan template, but has been adapted to the needs and requirements of the INEEL safety analysis community. The implementation of this Safety Analyst Training Standard is part of the Integrated Safety Management System (ISMS) Phase II Implementation currently underway at the INEEL. The objective of this paper is to discuss (1) the INEEL Safety Analyst Training Standard, (2) the development of the safety analyst individual training plans, (3) the implementation issues encountered during this initial phase of implementation, (4) the solutions developed, and (5) the implementation activities remaining to be completed

  8. 75 FR 51818 - National Institute for Occupational Safety and Health; Final Effect of Designation of a Class of...

    Science.gov (United States)

    2010-08-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health...: National Institute for Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS... a number of work days aggregating at least 250 work days, occurring either solely under this...

  9. 75 FR 74733 - National Institute for Occupational Safety and Health; Final Effect of Designation of a Class of...

    Science.gov (United States)

    2010-12-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health...: National Institute for Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS... aggregating at least 250 work days, occurring either solely under this employment, or in combination with work...

  10. 75 FR 51816 - National Institute for Occupational Safety and Health; Final Effect of Designation of a Class of...

    Science.gov (United States)

    2010-08-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health...: National Institute for Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS... number of work days aggregating at least 250 work days, occurring either solely under this employment or...

  11. Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea's Construction Industry.

    Science.gov (United States)

    Yoon, Seok J; Lin, Hsing K; Chen, Gang; Yi, Shinjea; Choi, Jeawook; Rui, Zhenhua

    2013-12-01

    The study was conducted to investigate the current status of the occupational health and safety management system (OHSMS) in the construction industry and the effect of OHSMS on accident rates. Differences of awareness levels on safety issues among site general managers and occupational health and safety (OHS) managers are identified through surveys. The accident rates for the OHSMS-certified construction companies from 2006 to 2011, when the construction OHSMS became widely available, were analyzed to understand the effect of OHSMS on the work-related injury rates in the construction industry. The Korea Occupational Safety and Health Agency 18001 is the certification to these companies performing OHSMS in South Korea. The questionnaire was created to analyze the differences of OHSMS awareness between site general managers and OHS managers of construction companies. The implementation of OHSMS among the top 100 construction companies in South Korea shows that the accident rate decreased by 67% and the fatal accident rate decreased by 10.3% during the period from 2006 to 2011. The survey in this study shows different OHSMS awareness levels between site general managers and OHS managers. The differences were motivation for developing OHSMS, external support needed for implementing OHSMS, problems and effectiveness of implementing OHSMS. Both work-related accident and fatal accident rates were found to be significantly reduced by implementing OHSMS in this study. The differences of OHSMS awareness between site general managers and OHS managers were identified through a survey. The effect of these differences on safety and other benefits warrants further research with proper data collection.

  12. Experiences of frontline nursing staff on workplace safety and occupational health hazards in two psychiatric hospitals in Ghana.

    Science.gov (United States)

    Alhassan, Robert Kaba; Poku, Kwabena Adu

    2018-06-06

    Psychiatric hospitals need safe working environments to promote productivity at the workplace. Even though occupational health and safety is not completely new to the corporate society, its scope is largely limited to the manufacturing/processing industries which are perceived to pose greater dangers to workers than the health sector. This paper sought to explore the experiences of frontline nursing personnel on the occupational health and safety conditions in two psychiatric hospitals in Ghana. This is an exploratory cross-sectional study among 296 nurses and nurse-assistants in Accra (n = 164) and Pantang (n = 132) psychiatric hospitals using the proportional stratified random sampling technique. Multivariate Ordinary Least Squares (OLS) regression test was conducted to ascertain the determinants of staff exposure to occupational health hazards and the frequency of exposure to these occupational health hazards on daily basis. Knowledge levels on occupational health hazards was high in Accra and Pantang psychiatric hospitals (i.e. 92 and 81% respectively), but barely 44% of the 296 interviewed staff in the two hospitals said they reported their most recent exposure to an occupational health hazard to hospital management. It was found that staff who worked for more years on the ward had higher likelihood of exposure to occupational health hazards than those who worked for lesser years (p = 0.002). The category of occupational health hazards reported most were the physical health hazards. Psychosocial hazards were the least reported health hazards. Frequency of exposure to occupational health hazards on daily basis was positively associated with work schedules of staff particularly, staff on routine day schedule (Coef = 4.49, p = 0.011) and those who alternated between day and night schedules (Coef = 4.48, p = 0.010). Occupational health and safety conditions in the two hospitals were found to be generally poor. Even though majority of

  13. Nudging for Prevention in Occupational Health and Safety in South Africa Using Fiscal Policies.

    Science.gov (United States)

    de Jager, Pieter; Rees, David; Kisting, Sophia; Kgalamono, Spo; Ndaba, Mpume; Stacey, Nicolas; Tugendhaft, Aviva; Hofman, Karen

    2017-08-01

    Currently, in some countries occupational health and safety policy and practice have a bias toward secondary prevention and workers' compensation rather than primary prevention. Particularly, in emerging economies, research has not adequately contributed to effective interventions and improvements in workers' health. This article, using South Africa as a case study, describes a methodology for identifying candidate fiscal policy interventions and describes the policy interventions selected for occupational health and safety. It is argued that fiscal policies are well placed to deal with complex intersectoral health problems and to focus efforts on primary prevention. A major challenge is the lack of empirical evidence to support the effectiveness of fiscal policies in improving workers' health. A second challenge is the underprioritization of occupational health and safety partly due to the relatively small burden of disease attributed to occupational exposures. Both challenges can and should be overcome by (i) conducting policy-relevant research to fill the empirical gaps and (ii) reconceptualizing, both for policy and research purposes, the role of work as a determinant of population health. Fiscal policies to prevent exposure to hazards at work have face validity and are thus appealing, not as a replacement for other efforts to improve health, but as part of a comprehensive effort toward prevention.

  14. Translational PKPD modeling in schizophrenia: linking receptor occupancy of antipsychotics to efficacy and safety

    NARCIS (Netherlands)

    Pilla Reddy, Venkatesh; Kozielska, Magdalena; Johnson, Martin; Vermeulen, An; Liu, Jing; de Greef, Rik; Groothuis, Genoveva; Danhof, Meindert; Proost, Johannes

    2012-01-01

    Objectives: To link the brain dopamine D2 receptor occupancy (D2RO) of antipsychotic drugs with clinical endpoints of efficacy and safety to assess the therapeutic window of D2RO. Methods: Pharmacokinetic-Pharmacodynamic (PK-PD) models were developed to predict the D2 receptor occupancy of

  15. Occupational Safety and Health System for Workers Engaged in Emergency Response Operations in the USA.

    Science.gov (United States)

    Toyoda, Hiroyuki; Kubo, Tatsuhiko; Mori, Koji

    2016-12-03

    To study the occupational safety and health systems used for emergency response workers in the USA, we performed interviews with related federal agencies and conducted research on related studies. We visited the Federal Emergency Management Agency (FEMA) and National Institute for Occupational Safety and Health (NIOSH) in the USA and performed interviews with their managers on the agencies' roles in the national emergency response system. We also obtained information prepared for our visit from the USA's Occupational Safety and Health Administration (OSHA). In addition, we conducted research on related studies and information on the website of the agencies. We found that the USA had an established emergency response system based on their National Incident Management System (NIMS). This enabled several organizations to respond to emergencies cooperatively using a National Response Framework (NRF) that clarifies the roles and cooperative functions of each federal agency. The core system in NIMS was the Incident Command System (ICS), within which a Safety Officer was positioned as one of the command staff supporting the commander. All ICS staff were required to complete a training program specific to their position; in addition, the Safety Officer was required to have experience. The All-Hazards model was commonly used in the emergency response system. We found that FEMA coordinated support functions, and OSHA and NIOSH, which had specific functions to protect workers, worked cooperatively under NRF. These agencies employed certified industrial hygienists that play a professional role in safety and health. NIOSH recently executed support activities during disasters and other emergencies. The USA's emergency response system is characterized by functions that protect the lives and health of emergency response workers. Trained and experienced human resources support system effectiveness. The findings provided valuable information that could be used to improve the

  16. Occupational health and safety services for immigrant workers in Japanese workplaces.

    Science.gov (United States)

    Uchino, Asuka; Muto, Takashi; Muto, Shigeki

    2010-01-01

    The objective of this study was to clarify the status of occupational health and safety services for immigrant workers, the barriers to employing immigrant workers and the needs of the managers in workplaces to keep immigrant workers healthy and safe. This study was a cross-sectional survey. We sent self-administered questionnaires to 126 workplaces in the western part of Shizuoka Prefecture, Japan in August 2006. The questionnaire included the characteristics of the workplace, barriers to employing immigrant workers, current actions to keep immigrant workers healthy and safe, the implementation rate of health checkups and important issues to keep immigrant workers healthy and safe. Implementation rates of health and safety education, creating job instruction manuals written in their native languages, creating safety signs written in their native languages, and the use of translators were 62.5%, 50.0%, 41.1% and 37.5%, respectively. Implementation rates of general health checkups, special health checkups and follow up after health checkups were 80.8%, 73.6% and 67.3%, respectively. The most important issue which the managers considered kept immigrant workers healthy and safe was health checkups (69.6%). In conclusion, several occupational health and safety services were conducted for immigrant workers without a margin to compare with Japanese workers.

  17. Nevada State plan; final approval determination. Occupational Safety and Health Administration (OSHA), U.S. Department of Labor. Final State plan approval--Nevada.

    Science.gov (United States)

    2000-04-18

    This document amends OSHA's regulations to reflect the Assistant Secretary's decision granting final approval to the Nevada State plan. As a result of this affirmative determination under section 18(e) of the Occupational Safety and Health Act of 1970, Federal OSHA's standards and enforcement authority no longer apply to occupational safety and health issues covered by the Nevada plan, and authority for Federal concurrent jurisdiction is relinquished. Federal enforcement jurisdiction is retained over any private sector maritime employment, private sector employers on Indian land, and any contractors or subcontractors on any Federal establishment where the land is exclusive Federal jurisdiction. Federal jurisdiction remains in effect with respect to Federal government employers and employees. Federal OSHA will also retain authority for coverage of the United States Postal Service (USPS), including USPS employees, contract employees, and contractor-operated facilities engaged in USPS mail operations.

  18. Pushing and pulling: an assessment tool for occupational health and safety practitioners.

    Science.gov (United States)

    Lind, Carl Mikael

    2018-03-01

    A tool has been developed for supporting practitioners when assessing manual pushing and pulling operations based on an initiative by two global companies in the manufacturing industry. The aim of the tool is to support occupational health and safety practitioners in risk assessment and risk management of pushing and pulling operations in the manufacturing and logistics industries. The tool is based on a nine-multiplier equation that includes a wide range of factors affecting an operator's health risk and capacity in pushing and pulling. These multipliers are based on psychophysical, physiological and biomechanical studies in combination with judgments from an expert group consisting of senior researchers and ergonomists. In order to consider usability, more than 50 occupational health and safety practitioners (e.g., ergonomists, managers, safety representatives and production personnel) participated in the development of the tool. An evaluation by 22 ergonomists supports that the push/pull tool is user friendly in general.

  19. 76 FR 62409 - National Institute for Occupational Safety and Health; Final Effect of Designation of a Class of...

    Science.gov (United States)

    2011-10-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institute for Occupational Safety and Health...: National Institute for Occupational Safety and Health (NIOSH), Department of Health and Human Services (HHS..., from January 1, 1961 through June 30, 1970, for a number of work days aggregating at least 250 work...

  20. Color Functionality Used in Visual Display for Occupational and Environmental Safety and Managing Color Vision Deficiency.

    Science.gov (United States)

    Ochiai, Nobuhisa; Kondo, Hiroyuki

    2017-01-01

    The effects of color perception are utilized in visual displays for the purpose of safety in the workplace and in daily life. These effects, generally known as color functionality, are divided into four classifications: visibility, legibility, conspicuity and discriminability. This article focuses on the relationship between the color functionality of color schemes used in visual displays for occupational and environmental safety and color vision deficiency (particularly congenital red-green color deficiency), a critical issue in ophthalmology, and examines the effects of color functionality on the perception of the color red in individuals with protan defects. Due to abrupt system reforms, current Japanese clinical ophthalmology finds itself in a situation where it is insufficiently prepared to handle congenital red-green color deficiencies. Indeed, occupational problems caused by color vision deficiencies have been almost completely neglected, and are an occupational safety and health concern that will need to be solved in the future. This report will present the guidelines for the color vision testing established by the British Health and Safety Executive (HSE), a pioneering example of a model meant to solve these problems. Issues relating to the creation of guidelines adapted to Japanese clinical ophthalmology will also be examined, and we will discuss ways to utilize color functionality used in visual displays for occupational and environmental safety to help manage color vision deficiency.

  1. Basic Safety Standards for Radiation Protection

    International Nuclear Information System (INIS)

    1962-01-01

    Pursuant to the provisions of its Statute relevant to the adoption and application of safety standards for protection against radiation, the Agency convened a panel of experts which formulated the Basic Safety Standards set forth in this publication. The panel met under the chairmanship of Professor L. Bugnard, Director of the French Institut National d'Hygiene, and representatives of the United Nations and of several of its specialized agencies participated in its work. The Basic Safety Standards thus represent the result of a most careful assessment of the variety of complex scientific and administrative problems involved. Nevertheless, of course, they will need to be revised from time to time in the light of advances in scientific knowledge, of comments received from Member States and of the work of other competent international organizations. The Agency's Board of Governors in June 1962 approved the Standards as a first edition, subject to later revision as mentioned above, and authorized Director General Sigvard Eklund to apply the Standards in Agency and Agency-assisted operations and to invite Governments of Member States to take them as a basis in formulating national regulations or recommendations on protection against the dangers arising from ionizing radiations. It is mainly for this last purpose that the Basic Safety Standards are now being published in the Safety Series; but it is hoped that this publication will also interest a much wider circle of readers.

  2. Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

    Directory of Open Access Journals (Sweden)

    Bhumika.T.V.

    2014-01-01

    Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross- sectional study was conducted among 160 non- industrial welding workers in Udupi district. A pre-structured interviewer-administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

  3. Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

    Directory of Open Access Journals (Sweden)

    Bhumika.T.V.

    2014-09-01

    Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross--‐ sectional study was conducted among 160 non--‐ industrial welding workers in Udupi district. A pre--‐structured interviewer--‐administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

  4. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Interventional Cardiology

    International Nuclear Information System (INIS)

    2014-02-01

    In the last three decades, the use of image guided interventional procedures in cardiology has increased significantly, bringing great benefit to millions of patients around the world. As technology improves, the medical capabilities of these procedures continue to expand, adding further to the armamentarium for diagnosis and treatment of patients with cardiac problems. All of these procedures require health professionals (including interventional cardiologists, electrophysiologists, nurses and medical radiation technologists) to be present in the room and alongside the patient when radiation is being used, which may result in occupational exposure. While it has been long known that there is significant potential for health professionals in attendance during interventional cardiology to receive non-trivial occupational exposures, reported details have been typically limited to a few specific interventional cardiology facilities and situations. A more global perspective has been lacking, as is the availability of a systematic means for improving occupational radiation protection in interventional cardiology facilities throughout the world. In 2006, the IAEA published the Fundamental Safety Principles (IAEA Safety Standards Series No. SF-1), which sets out the fundamental safety objective and principles of protection and safety. In 2011, the IAEA published Radiation Protection and Safety of Sources: International Basic Safety Standards (IAEA Safety Standards Series No. GSR Part 3 (Interim Edition)), which sets out the requirements for meeting the fundamental safety objective and applying the principles specified in the Fundamental Safety Principles. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support for radiation protection and safety provided by the IAEA to Member States. This publication was developed under the IAEA's statutory responsibility to facilitate worldwide application

  5. Occupational health and safety management in micro and small enterprises

    DEFF Research Database (Denmark)

    Hasle, Peter

    2015-01-01

    Occupational health and safety management (OHSM) in micro and small enterprises may look like an odd ex-pression. Most owner-managers do not think of OHSM as something to give priority. They are occupied with management of the core business which in many cases constitute a simple fight for survival...

  6. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-08-15

    Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

  7. The Information System on Occupational Exposure in Medicine, Industry and Research (ISEMIR): Industrial Radiography

    International Nuclear Information System (INIS)

    2014-08-01

    Industrial radiography work is often carried out under difficult working conditions, such as in confined spaces, in extreme cold or heat, or during the night. Working under such adverse conditions might result in operational situations in which occupational radiation protection may be compromised. Experience shows that incidents involving industrial radiography sources have sometimes resulted in high doses to workers, causing severe health consequences such as radiation burns and, in a few cases, death. It has been long known that there is significant potential for industrial radiography personnel to receive non-trivial occupational exposure. However, a global perspective is lacking, as is the availability of a systematic means for improving occupational radiation protection in industrial radiography worldwide. In 2006, the IAEA published IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, jointly sponsored by the European Atomic Energy Community, the Food and Agriculture Organization of the United Nations (FAO), the International Labour Organization (ILO), the International Maritime Organization, the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organization (PAHO), the United Nations Environment Programme (UNEP) and the World Health Organization (WHO). That publication sets out the fundamental safety objective and principles of protection and safety. In 2014, the IAEA published IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards (the BSS), jointly sponsored by the European Commission, the FAO, the ILO, OECD/NEA, the PAHO, UNEP and the WHO. The BSS sets out the requirements that are designed to meet fundamental safety objectives and to apply the principles specified in IAEA Safety Standards Series No. SF-1. The establishment of safety requirements and provision of guidance on occupational radiation protection is a major component of the support

  8. Occupational cancer

    International Nuclear Information System (INIS)

    Alderson, M.

    1986-01-01

    This book aims to review the occurrence and causes of occupational cancer and is aimed at assisting medical and safety staff, management and health and safety representatives. It is presented in the following chapters: 1) Epidemiological method 2) Agents causing occupationally induced cancer, including radiation 3) Occupations associated with risk of cancer 4) Aetiology of cancer 5) Control of occupationally induced cancer, research, prevention, legislation, national and international bodies, control of specific occupational carcinogens, including irradiation. (U.K.)

  9. The determinants of employee participation in occupational health and safety management.

    Science.gov (United States)

    Masso, Märt

    2015-01-01

    This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.

  10. Preliminary safety information document for the standard MHTGR. Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    None

    1986-01-01

    This report contains information concerning: operational radionuclide control; occupational radiation protection, conduct of operations; initial test program; safety analysis; technical specifications; and quality assurance. (JDB)

  11. An integrated approach for improving occupational health and safety management: the voluntary protection program in Taiwan.

    Science.gov (United States)

    Su, Teh-Sheng; Tsai, Way-Yi; Yu, Yi-Chun

    2005-05-01

    A voluntary compliance program for occupational health and safety management, Voluntary Protection Programs (VPP), was implemented with a strategy of cooperation and encouragement in Taiwan. Due to limitations on increasing the human forces of inspection, a regulatory-based guideline addressing the essence of Occupational Health and Safety Management Systems (OHSMS) was promulgated, which combined the resources of third parties and insurance providers to accredit a self-improving worksite with the benefits of waived general inspection and a merit contributing to insurance premium payment reduction. A designated institute accepts enterprise's applications, performs document review and organizes the onsite inspection. A final review committee of Council of Labor Affairs (CLA) confers a two-year certificate on an approved site. After ten years, the efforts have shown a dramatic reduction of occupational injuries and illness in the total number of 724 worksites granted certification. VPP worksites, in comparison with all industries, had 49% lower frequency rate in the past three years. The severity rate reduction was 80% in the same period. The characteristics of Taiwan VPP program and international occupational safety and health management programs are provided. A Plan-Do-Check-Act management cycle was employed for pursuing continual improvements to the culture fostered. The use of a quantitative measurement for assessing the performance of enterprises' occupational safety and health management showed the efficiency of the rating. The results demonstrate that an employer voluntary protection program is a promising strategy for a developing country.

  12. Occupational health and safety inspection of the Ranger Uranium Mine

    International Nuclear Information System (INIS)

    Rosen, R.

    1987-04-01

    The principal purpose of the inspection was to assess all aspects of occupational health and safety at the Ranger Uranium Mine. A major objective was to identify actual and potential hazards under normal and abnormal conditions, particularly in relation to those topics about which the unions had expressed some concern. An assessment was made of current safety policies, procedures and practices at the site; and, as far as practicable, those tasks which involved risks to workers were identified. The results and recommendations of the inspection are contained in this report

  13. OSHA safety requirements for hazardous chemicals in the workplace.

    Science.gov (United States)

    Dohms, J

    1992-01-01

    This article outlines the Occupational Safety and Health Administration (OSHA) requirements set forth by the Hazard Communication Standard, which has been in effect for the healthcare industry since 1987. Administrators who have not taken concrete steps to address employee health and safety issues relating to hazardous chemicals are encouraged to do so to avoid the potential of large fines for cited violations. While some states administer their own occupational safety and health programs, they must adopt standards and enforce requirements that are at least as effective as federal requirements.

  14. Verification of implementation of the radiological safety standards through the regulatory inspections

    International Nuclear Information System (INIS)

    Perez Gonzalez, Francisco; Fornet Rodriguez, Ofelia M.

    2008-01-01

    Full text: As an element of the updating process of the legal framework on radiological safety in Cuba, a new rule was put into force; the Radiological Basic Safety Standards (RBSS) in January 2002. Five years after the application of these new safety requirements, it was considered appropriate to assess the effectiveness of its implementation. Therefore, in this work the authors analysed the outcomes of the regulatory inspections conducted in this period upon medical and industrial practices in a sample of facilities representative of those with the highest radiological risks in the territory under supervision of a Territorial Delegation of the Nuclear Regulatory Authority. For better understanding of this presentation, a summary explanation of the structure of the rule is given in its introduction. The work was to identify for each deficiency, or finding, or counter-measure; out of the relevant inspections; the corresponding requirement/Article of the RBSS that shows difficulties in implementation. For each installation an analysis is made with regard to the relevant articles difficult to implement. Finally, the appraisal is shown separately for the medical practice, and for the industrial practice, and also in general for the whole sample of installations under review. The study showed that the implementation of the Standards has been satisfactory and uniform in the practices under review. So far it seems that there have not been major difficulties with the implementation of the Titles; III On Intervention, IV Dose Limits, as well as with the Especial, Final, and Transitory Dispositions. On the other hand, it is shown there is a need for continued work only with regard to the implementation of the requirements in Section IV Verification of Safety and in Section V On the responsibilities with regard to occupational exposure in Chapter III Title I, and correspondingly in Chapter II Occupational Exposure in Title II. It is recommended to conduct this kind of

  15. Radiation protection and safety of radiation sources international basic safety standards

    CERN Document Server

    International Atomic Energy Agency. Vienna

    2014-01-01

    The Board of Governors of the IAEA first approved Basic Safety Standards in June 1962; they were published by the IAEA as IAEA Safety Series No. 9. A revised edition was issued in 1967. A third revision was published by the IAEA as the 1982 Edition of IAEA Safety Series No. 9 ; this edition was jointly sponsored by the IAEA, ILO, OECD/NEA and the WHO. The next edition was International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, published by the IAEA as IAEA Safety Series No. 115 in February 1996, and jointly sponsored by the FAO, IAEA, ILO, OECD/NEA, PAHO and the WHO.

  16. OSHA standard for medical surveillance of hazardous waste workers.

    Science.gov (United States)

    Melius, J M

    1990-01-01

    The increasing amount of work involving hazardous waste sites and the heavy involvement of the federal and state governments in this work have led to the gradual development of guidelines and standards providing for occupational safety and health programs for these sites. On March 6, 1989, the Occupational Safety and Health Administration published its final rule governing occupational safety and health matters at hazardous waste sites and emergency operations. This rule is currently scheduled to take effect on March 6, 1990. This chapter will briefly describe this regulation, particularly its medical surveillance requirements.

  17. 78 FR 66642 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Science.gov (United States)

    2013-11-06

    ...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Final... (78 FR 35559) a direct final rule that revised its signage standards for general industry and... revised its signage standards for general industry at 29 CFR 1910.97, 1910.145, and 1910.261, and...

  18. Student internships with unions and workers: building the occupational health and safety movement.

    Science.gov (United States)

    Bateson, Gail

    2013-01-01

    One of the most successful programs to recruit young professionals to the occupational safety and health field was launched more than 35 years ago, in 1976. Created by the Montefiore Medical Center's Department of Social Medicine collaborating with Tony Mazzocchi of the Oil, Chemical and Atomic Workers International Union (OCAW), it placed medical, nursing, and public health students in summer internships with local unions to identify and solve health and safety problems in the workplace. The experience of working with and learning from workers about the complex interactions of political, economic, and scientific-technological issues surrounding workplace conditions inspired many students to enter and stay in our field. Many former interns went on to make important medical and scientific contributions directly linked to their union-based projects. Former interns are now among the leaders within the occupational health and safety community, holding key positions in leading academic institutions and governmental agencies.

  19. Training of occupational safety and health: knowledge among healthcare professionals in Malaysia.

    Science.gov (United States)

    Lugah, V; Ganesh, B; Darus, A; Retneswari, M; Rosnawati, M R; Sujatha, D

    2010-07-01

    Awareness of occupational safety and health (OSH) plays an important role in the prevention of occupational injuries and diseases. Following the enactment of the Occupational Safety and Health Act (OSHA) in 1994, various programmes have been implemented by different agencies to increase awareness and knowledge of OSH in the workplace, including among healthcare workers. The objective of this study was to determine the level of OSH awareness and knowledge among healthcare professionals in Malaysia. A cross-sectional study was conducted using a 21-item self-administered questionnaire addressing information on demographics, general OSH issues, OSH legislations, occupational hazards in the healthcare setting and personal protective equipment (PPE). The response rate was 93.1 percent (284 healthcare professionals). The overall level of knowledge on OSH was moderate, with a mean score of 62.0 percent. A larger proportion of doctors showed good OSH knowledge compared to other categories of healthcare workers, with administrative staff scoring the poorest marks. Participants were most knowledgeable about PPE, with a mean score of 72.0 percent (95 percent confidence interval [CI] 68.3, 75.6), compared to other sections such as general OSH, legislations and occupational hazards, with mean scores of 58.0 percent (95 percent CI 56.1, 60.1), 57.0 percent (95 percent CI 54.1, 60.8) and 64.0 percent (95 percent CI 61.7, 66.2), respectively. Although the OSHA 1994 has existed in Malaysia for more than ten years, awareness of OSH remains relatively poor. This warrants a greater effort to promote OSH knowledge and principles among the professionals.

  20. Reinvention, renewal or repetition? the great western railway and occupational safety on Britain’s railways, c.1900-c.1920

    OpenAIRE

    Esbester, Mike

    2005-01-01

    In 1913, the Great Western Railway introduced an occupational safety education campaign that appeared to be a radical break with all previous methods of promoting safety in the British industrial workplace. In this paper, I assess the extent to which this “new” campaign reinvented occupational safety education in Britain. I argue that the Great Western combined new techniques of communicating safety messages with the relatively traditional content of those messages. Rather than a simple repet...

  1. 77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

    Science.gov (United States)

    2012-11-16

    ..., 1918, and 1926 [Docket No. OSH-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this notice, OSHA is withdrawing the proposed rule that...

  2. 76 FR 4944 - Ionizing Radiation Standard; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2011-01-27

    ... Radiation Standard protect workers from the adverse health effects that may result from occupational... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2010-0030... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA...

  3. Regulatory role and approach of BARC Safety Council in safety and occupational health in BARC facilities

    International Nuclear Information System (INIS)

    Rajdeep; Jayarajan, K.; Taly, Y.K.

    2016-01-01

    Bhabha Atomic Research Centre is involved in multidisciplinary research and developmental activities, related to peaceful use of nuclear energy and its societal benefits. In order to achieve high level of performance of these facilities, the best efforts are made to maintain good health of the plant personnel and good working conditions. BARC Safety Council (BSC), which is the regulatory body for BARC facilities, regulates radiation safety, industrial safety and surveillance of occupational health, by implementing various rules and guidelines in BARC facilities. BARC Safety framework consists of various committees in a 3-tier system. The first tier is BSC, which is the apex body authorized for issuing directives, permissions, consents and authorizations. It is having responsibility of ensuring protection and safety of public, environment, personnel and facilities of BARC through enforcement of radiation protection and industrial safety programmes. Besides the 18 committees in 2"n"d tier, there are 6 other expert committees which assist in functioning of BSC. (author)

  4. Industrial hygiene, occupational safety and respiratory symptoms in the Pakistani cotton industry.

    Science.gov (United States)

    Khan, Abdul Wali; Moshammer, Hanns Michael; Kundi, Michael

    2015-04-02

    In the cotton industry of Pakistan, 15 million people are employed and exposed to cotton dust, toxic chemicals, noise and physical hazards. The aim of this study was to determine the prevalence of health symptoms, particularly respiratory symptoms, and to measure cotton dust and endotoxin levels in different textile factories of Faisalabad, Pakistan. A cross-sectional investigation was performed in a representative sample of 47 cotton factories in the Faisalabad region in Punjab, Pakistan. Respiratory symptoms of 800 workers were documented by questionnaire. Occupational safety in the factories was assessed by a trained expert following a checklist, and dust and endotoxin levels in different work areas were measured. Prevalence of respiratory disease symptoms (fever, shortness of breath, chest tightness and cough) was generally high and highest in the weaving section of the cotton industry (20-40% depending on symptoms). This section also displayed the poorest occupational safety ratings and the highest levels of inhalable cotton dust (mean±SD 4.6±2.5 vs 0.95±0.65 mg/m(3) in compact units). In contrast, endotoxin levels were highest in the spinning section (median 1521 EU/m(3)), where high humidity is maintained. There are still poor working conditions in the cotton industry in Pakistan where workers are exposed to different occupational hazards. More health symptoms were reported from small weaving factories (power looms). There is a dire need for improvements in occupational health and safety in this industrial sector with particular focus on power looms. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  5. 78 FR 35585 - Updating OSHA Standards Based on National Consensus Standards; Signage

    Science.gov (United States)

    2013-06-13

    ...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Notice... Administration (``OSHA'' or ``the Agency'') proposes to update its general industry and construction signage... standards, ANSI Z53.1-1967, Z35.1-1968, and Z35.2-1968, in its signage standards, thereby providing...

  6. NIOSH (National Institute for Occupational Safety and Health) testimony to Department of Labor on the Mine Safety and Health Administration proposed rule: ionizing radiation standards for metal and nonmetal mines, August 13, 1987 by R. Niemeier

    International Nuclear Information System (INIS)

    1987-01-01

    Recommendations were offered for protecting workers against the health effects of ionizing radiation in metal and nonmetal mines. Available data demonstrating such health effects was reviewed and evidence supporting the technical feasibility of reducing the current Mine Safety and Health Administration (MSHA) standard was presented. Five recent studies indicated a significant increase in lung cancer rates associated with radon progeny exposure in underground mines. Additional studies indicated an exposure/response relationship in uranium miners. The influence of smoking on the association between radon progeny exposure and lung cancer was cited. Evidence has indicated that exposure to radon progeny carries a potential risk of developing occupationally induced lung cancer. Risk-assessment data supported the conclusion that miners with the same characteristics as the United States Public Health Service uranium miners cohort and who accrue a cumulative occupational exposure of 120 working level months, would have a lung cancer excess lifetime risk of about 35 to 40 lung cancer deaths per 1000 exposed miners. Modern mining methods using dilution ventilation as well as bulkheading and backfilling techniques make it possible to achieve substantial reductions in the cumulative exposure to radon progeny. Information was provided on sampling strategy, control technology, ventilation systems, respirators, and medical surveillance programs

  7. Radiological and nuclear safety- evolution, standards and similarity

    International Nuclear Information System (INIS)

    Soman, S.D.

    1996-01-01

    With the realisation of potential for severe health affects after the discovery of x-rays and radioactivity, the radiation protection aspect became focus of interest for medical users from the beginning of this century. With the activities of International Commission on Radiological Protection (ICRP), the standards evolved during all these years based on epidemiological data and radio-biological research. The current standards are the ICRP recommendations of 1990. Based on these, internationally harmonised standards for protection against ionising radiation and safety of radioactive sources were brought out by IAEA in 1994. The nuclear safety (implies safety of nuclear power plants) came into prominence when large scale units were designed and operated since mid 1950s. The philosophy in nuclear safety has evolved in past 2-3 decades taking into account the lessons learned from accidents, mainly Three Mile Island (1979) and Chernobyl-4 (1986). These current nuclear safety standards are incorporated in INSAG reports, particularly INSAG-3. This paper brings out salient features of these evolutions, current standards and similarity of radiation and nuclear safety standards in their present form. (author). 7 refs., 10 tabs

  8. Enhanced FAA-hybrid III numerical dummy model in Madymo for aircraft occupant safety assessment

    NARCIS (Netherlands)

    Boucher, H.; Waagmeester, C.D.

    2003-01-01

    To improve survivability and to minimize the risk of injury to occupants in helicopter crash events, a complete Cabin Safety System concept including safety features and an enhanced FAA-Hybrid III dummy were developed within the HeliSafe project. A numerical tool was also created and validated to

  9. New requirements on safety of nuclear power plants according to the IAEA safety standards

    International Nuclear Information System (INIS)

    Misak, J.

    2005-01-01

    In this presentation author presents new requirements on safety of nuclear power plants according to the IAEA safety standards. It is concluded that: - New set of IAEA Safety Standards is close to completion: around 40 standards for NPPs; - Different interpretation of IAEA Safety Standards at present: best world practices instead of previous 'minimum common denominator'; - A number of safety improvements required for NPPs; - Requirements related to BDBAs and severe accidents are the most demanding due to degradation of barriers: hardware modifications and accident management; - Large variety between countries in implementation of accident management programmes: from minimum to major hardware modifications; -Distinction between existing and new NPPs is essential from the point of view of the requirements; WWER 440 reactors have potential to reflect IAEA Safety Standards for existing NPPs; relatively low reactor power offers broader possibilities

  10. 46 CFR 197.326 - Oxygen safety.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Oxygen safety. 197.326 Section 197.326 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.326 Oxygen safety. (a) Equipment used with...

  11. Improving occupational safety in Kuzbass mines

    Energy Technology Data Exchange (ETDEWEB)

    Evseev, V S

    1986-08-01

    Some achievements of VostNII are listed in improving occupational safety in Kuzbass mines. Methane is a major problem: 90.6% of mines is in category III or supercategory; over 21% has an absolute methane emission of 30 m/sup 3//min or more. Another problem is spontaneous fires, which cost 2 million t of coal per year. One method of preventing these is injection of antipyrogens (urea and diammonium phosphate); another is the creation of gel (water glass, ammonium chloride and water) barriers in goaf areas. High pressure water jets are also used. Various methods of improving ventilation systems to match increased coal output are proposed, including drilling large diameter ventilation boreholes from the surface. In Leninskugol' mines the useful air is only 55.8% of the total delivered. More attention should be given to degassing (currently producing 130 million m/sup 3//y of methane). Dust levels are increasing due to the advent of narrow web cutter loaders (100% of coal cutter loaders in Kuzbass mines in 1984). Water injection and spraying are partially effective at dust suppression. Some electrical safety devices developed by VostNII are described.

  12. 77 FR 19737 - The Asbestos in Shipyards Standard; Extension of the Office of Management and Budget's Approval...

    Science.gov (United States)

    2012-04-02

    ... Standard protect workers from the adverse health effects that may result from occupational exposure to... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0009] The... Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA), Labor...

  13. 77 FR 68684 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

    Science.gov (United States)

    2012-11-16

    ..., 1918, and 1926 [Docket No. OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final rule; confirmation of effective date. SUMMARY: OSHA is confirming the effective date of its...

  14. 77 FR 21311 - Locomotive Safety Standards

    Science.gov (United States)

    2012-04-09

    ... preparedness, alcohol and drug testing, locomotive engineer certification, and workplace safety. In 1980, FRA... Association (ATDA) Amtrak AAR Association of Railway Museums (ARM) Association of State Rail Safety Managers... Administration 49 CFR Parts 229 and 238 Locomotive Safety Standards; Final Rule #0;#0;Federal Register / Vol. 77...

  15. Promoting occupational safety and health through the supply chain Literature review

    NARCIS (Netherlands)

    Ustailieva, E.; Starren, A.; Eeckelaert, L.; Lopes Nunes, I.; Hauke, A.

    2012-01-01

    This report sheds light on occupational safety and health (OSH) within complex supply chain networks. Based on a literature, policy and case study review it attempts to give an overview of how OSH can be managed and promoted through the supply chain, and which drivers, incentives and instruments

  16. NUSS safety standards: A critical assessment

    International Nuclear Information System (INIS)

    Minogue, R.B.

    1985-01-01

    The NUSS safety standards are based on systematic review of safety criteria of many countries in a process carefully defined to assure completeness of coverage. They represent an international consensus of accepted safety principles and practices for regulation and for the design, construction, and operation of nuclear power plants. They are a codification of principles and practices already in use by some Member States. Thus, they are not standards which describe methodologies at their present state of evolution as a result of more recent experience and improvements in technological understanding. The NUSS standards assume an underlying body of national standards and a defined technological base. Detailed design and industrial practices vary between countries and the implementation of basic safety standards within countries has taken approaches that conform with national industrial practices. Thus, application of the NUSS standards requires reconciliation with the standards of the country where the reactor will be built as well as with the country from which procurement takes place. Experience in making that reconciliation will undoubtedly suggest areas of needed improvement. After the TMI accident a reassessment of the NUSS programme was made and it was concluded that, given the information at that time and the then level of technology, the basic approach was sound; the NUSS programme should be continued to completion, and the standards should be brought into use. It was also recognized, however, that in areas such as probabilistic risk assessment, human factors methodology, and consideration of detailed accident sequences, more advanced technology was emerging. As these technologies develop, and become more amenable to practical application, it is anticipated that the NUSS standards will need revision. Ideally those future revisions will also flow from experience in their use

  17. 78 FR 52567 - Formaldehyde Standard; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2013-08-23

    ... information (29 U.S.C. 657). The standard protects workers from the adverse health effects from occupational... Occupational Safety and Health, the affected workers, and their authorized representatives. II. Special Issues... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2009-0041...

  18. Safety Criteria and Standards for Bearing Capacity of Foundation

    Directory of Open Access Journals (Sweden)

    Yanlong Li

    2017-01-01

    Full Text Available This paper focuses on the evaluation standards of factor of safety for foundation stability analysis. The problem of foundation stability is analyzed via the methods of risk analysis of engineering structures and reliability-based design, and the factor of safety for foundation stability is determined by using bearing capacity safety-factor method (BSFM and strength safety-factor method (SSFM. Based on a typical example, the admissible factors of safety were calibrated with a target reliability index specified in relevant standards. Two safety criteria and their standards of bearing capacity of foundation for these two methods (BSFM and SSFM were established. The universality of the safety criteria and their standards for foundation reliability was verified based on the concept of the ratio of safety margin (RSM.

  19. [Occupational exposure investigation and protective measures in a tertiary infectious disease hospital].

    Science.gov (United States)

    Ding, H M; Zhou, X P; Huang, J Z

    2018-02-20

    Objective: To investigate the cause of occupational exposure among 136 nurses in a tertiary infectious disease hospital, and puts forward the prevention strategy. Methods: A total of 136 nurses exposed to occupational exposure between 2014 and 2016 were included in the study. Analysis was conducted from the years of work of nurses, exposure routes, and the pathogens. Results: The nurses suffer from the highest risk of occupational exposures (73.91%) .Nurses working for less than 5 years and interns are most likely to suffer occupational exposure (45.59% and 35.29% respectively) . Occupational exposure was mainly caused by needle injuries, in which infusion was the main route of occupational exposure (36.76%) . The improper treatment of needle pulling after infusion is the main link of needle puncture (36.76%) . Occupational exposure pathogens were mainly HBV (63.24%) . Conclusion: Nursing staff is the high-risk group of occupational exposure. Irregular operation, lack of awareness of protection, improper disposal after the needle withdrawal and poor safety assessment of the operating environment are the main causes of occupational exposure. It is suggested to strengthen the training of occupational safety and protection, enhance clinical nurses occupational safety protection consciousness, standardize medical operation, so as to prevent the occurrence of occupational exposure.

  20. Occupational Safety and Health Professionals' Training in Italy: Qualitative Evaluation Using T-LAB

    Science.gov (United States)

    Papaleo, Bruno; Cangiano, Giovanna; Calicchia, Sara

    2013-01-01

    Purpose: The purpose of this paper is to describe the evaluation of a training course on chemicals for occupational safety and health (OSH) professionals. The study aims were to assess the effectiveness of the course; to find out what type of training met these workers' needs best, as their role is vital in the management of safety at work; and to…

  1. Safety standards of IAEA for management systems

    International Nuclear Information System (INIS)

    Vincze, P.

    2005-01-01

    IAEA has developed a new series of safety standards which are assigned for constitution of the conditions and which give the instruction for setting up the management systems that integrate the aims of safety, health, life environment and quality. The new standard shall replace IAEA 50-C-Q - Requirements for security of the quality for safety in nuclear power plants and other nuclear facilities as well as 14 related safety instructions mentioned in the Safety series No. 50-C/SG-Q (1996). When developing of this complex, integrated set of requirements for management systems, the IAEA requirements 50-C-Q (1996) were taken into consideration as well as the publications developed within the International organisation for standardization (ISO) ISO 9001:2000 and ISO14001: 1996. The experience of European Union member states during the development, implementation and improvement of the management systems were also taken into consideration

  2. H.R. 3521: Nuclear Facilities Occupational Safety Improvement Act of 1989. Introduced in the House of Representatives, One Hundredth First Congress, First Session, October 25, 1989

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    Bill H.R.3521 was introduced in the House of Representatives of the United States on October 25, 1989. The purpose of this Act and the amendments made by this Act are to improve and enforce standards for employee health and safety at Department of Energy nuclear facilities. Congress finds that worker health and safety at Department of Energy nuclear facilities could be made substantially safer by applying standards developed by experts in the field of occupational health and safety. A section-by-section analysis makes up most of the report with emphasis on the following: application of OSHA to DOE nuclear facilities; cooperation with inspections and investigations; transfer and allocation of appropriations and personnel; worker training requirements; performance of NIOSH functions at DOE nuclear facilities; medical examinations of employees; and labor-management health and safety committees at DOE nuclear facilities

  3. Occupational hazards and safety measures amongst the paint factory workers in lagos, Nigeria.

    Science.gov (United States)

    Awodele, Olufunsho; Popoola, Temidayo D; Ogbudu, Bawo S; Akinyede, Akin; Coker, Herbert A B; Akintonwa, Alade

    2014-06-01

    The manufacture of paint involves a variety of processes that present with medical hazards. Safety initiatives are hence introduced to limit hazard exposures and promote workplace safety. This aim of this study is to assess the use of available control measures/initiatives in selected paint factories in Lagos West Senatorial District, Nigeria. A total of 400 randomly selected paint factory workers were involved in the study. A well-structured World Health Organization standard questionnaire was designed and distributed to the workers to elicit information on awareness to occupational hazards, use of personal protective devices, and commonly experienced adverse symptoms. Urine samples were obtained from 50 workers randomly selected from these 400 participants, and the concentrations of the heavy metals (lead, cadmium, arsenic, and chromium) were determined using atomic absorption spectroscopy. The results show that 72.5% of the respondents are aware of the hazards associated with their jobs; 30% have had formal training on hazards and safety measures; 40% do not use personal protective devices, and 90% of the respondents reported symptoms relating to hazard exposure. There was a statistically significant (p metal concentrations in the urine samples obtained from paint factory workers as compared with nonfactory workers. The need to develop effective frameworks that will initiate the integration and ensure implementation of safety regulations in paint factories is evident. Where these exist, there is a need to promote adherence to these practice guidelines.

  4. Crash safety concerns for out-of-position occupant postures: A look toward safety in highly automated vehicles.

    Science.gov (United States)

    McMurry, Timothy L; Poplin, Gerald S; Shaw, Greg; Panzer, Matthew B

    2018-04-09

    Highly automated vehicle occupants will all be passengers and may be free to ride while in postures for which existing occupant safety systems such as seat belts and airbags were not originally designed. These occupants could therefore face increased risk of injury when a crash occurs. Given that current vehicles are capable of supporting a variety of occupant postures outside of the normal design position, such as reclined or turned passengers, an evaluation of current field data was performed to better understand the risks of being out of position. We investigated the frequency, demographics, and injury outcomes for out-of-position occupants using NASS-CDS. A matched analysis was performed to compare injury outcomes for out-of-position passengers with in-position drivers involved in similar crashes. Finally, case studies for out-of-position occupants were examined in the Crash Injury Research (CIREN) database. Only 0.5% of occupants in NASS-CDS with a coded posture were out of position at the time of crash. Of the out-of-position occupants, being turned or seated sideways was almost as likely as being reclined. Out-of-position occupants were younger and less likely to be belted than their in-position counterparts. Analysis of the injury data indicated a trend that being out of position was associated with an elevated risk for serious injury. However, the number of out-of-position occupants was too small to provide a definitive or statistically significant conclusion on injury outcome. Though highly automated vehicles may eventually reduce the number of crashes and traffic fatalities in the future, there will be a transition period when these vehicles remain at risk from collisions with human-driven vehicles. These crashes could cause higher than anticipated rates of injury if occupants are less likely to be belted or tend to be in positions for which restraints are not optimized. This study highlights the need for future research on occupant response and

  5. Establishing the value of occupational health nurses' contributions to worker health and safety: a pilot test of a user-friendly estimation tool.

    Science.gov (United States)

    Graeve, Catherine; McGovern, Patricia; Nachreiner, Nancy M; Ayers, Lynn

    2014-01-01

    Occupational health nurses use their knowledge and skills to improve the health and safety of the working population; however, companies increasingly face budget constraints and may eliminate health and safety programs. Occupational health nurses must be prepared to document their services and outcomes, and use quantitative tools to demonstrate their value to employers. The aim of this project was to create and pilot test a quantitative tool for occupational health nurses to track their activities and potential cost savings for on-site occupational health nursing services. Tool developments included a pilot test in which semi-structured interviews with occupational health and safety leaders were conducted to identify currents issues and products used for estimating the value of occupational health nursing services. The outcome was the creation of a tool that estimates the economic value of occupational health nursing services. The feasibility and potential value of this tool is described.

  6. Information dissemination and use: critical components in occupational safety and health.

    Science.gov (United States)

    Schulte, P A; Okun, A; Stephenson, C M; Colligan, M; Ahlers, H; Gjessing, C; Loos, G; Niemeier, R W; Sweeney, M H

    2003-11-01

    Information dissemination is a mandated, but understudied, requirement of occupational and environmental health laws and voluntary initiatives. Research is needed on the factors that enhance and limit the development, transfer, and use of occupational safety and health information (OSH). Contemporary changes in the workforce, workplaces, and the nature of work will require new emphasis on the dissemination of information to foster prevention. Legislative and regulatory requirements and voluntary initiatives for dissemination of OSH information were identified and assessed. Literature on information dissemination was reviewed to identify important issues and useful approaches. More than 20 sections of laws and regulations were identified that mandated dissemination of occupational and environmental safety and health information. A four-stage approach for tracking dissemination and considering the flow of information was delineated. Special areas of dissemination were identified: the information needs of the changing workforce, new and young workers; small businesses; and workers with difficulty in understanding or reading English. We offer a framework for dissemination of OSH information and underscore the need to focus on the extent to which decision-makers and others receive and use such information. More solid data are also needed on current investments in disseminating, diffusing and applying OSH information and on the utility of that information. Am. J. Ind. Med. 44:515-531, 2003. Published 2003 Wiley-Liss, Inc.

  7. Occupational Health and Safety in Ethiopia: A review of Situational Analysis and Needs Assessment.

    Science.gov (United States)

    Kumie, Abera; Amera, Tadesse; Berhane, Kiros; Samet, Jonathan; Hundal, Nuvjote; G/Michael, Fitsum; Gilliland, Frank

    2016-01-01

    The current rapid economic development has brought changes in workplaces in developing countries, including Ethiopia. The organization of occupational health and safety services is not yet resilient enough to handle the growing demands for workers' health in the context of industrialization. There is limited information on the gaps and needs of occupational health services in workplaces in Ethiopia. The present review article describes the existing profile of occupational safety and health services in Ethiopia and identifies the current gaps and needs in the services. Secondary data sources were reviewed using a structured checklist to explore the status of occupational safety, health services and related morbidity. Local literature was consulted in order to describe the type and prevalence of work related hazards, patterns of industries and of workforce. Published articles were searched in Google, Google scholar, PUBMED, and HINARI databases. Relevant heads of stakeholder organizations and experts were interviewed to verify the gaps that were synthesized using desk review. Ethiopia is an agrarian country that is industrializing rapidly with a focus on construction, manufacturing, mining, and road infrastructure. An estimated work force of about two million is currently engaged in the public and private sectors. Males constitute the majority of this workforce. Most of the workforce has basic primary education. Commonly observed hazards in the workplace include occupational noise and dust of various types in manufacturing sectors and chemical exposures in the flower industry. Injury in both the agriculture and the manufacturing sectors is another workplace hazard commonly observed in the country. A lack of information made assessing workplace exposures in detail difficult. The prevalence of noise exposure was found to be high with the potential to seriously impact hearing capacity. Exposure to dust in textile and cement factories greatly exceeded international

  8. Occupational Therapy and Sensory Integration for Children with Autism: A Feasibility, Safety, Acceptability and Fidelity Study

    Science.gov (United States)

    Schaaf, Roseann C.; Benevides, Teal W.; Kelly, Donna; Mailloux-Maggio, Zoe

    2012-01-01

    Objective: To examine the feasibility, safety, and acceptability of a manualized protocol of occupational therapy using sensory integration principles for children with autism. Methods: Ten children diagnosed with autism spectrum disorder ages 4-8 years received intensive occupational therapy intervention using sensory integration principles…

  9. Operational safety

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    The PNL Safety, Standards and Compliance Program contributed to the development and issuance of safety policies, standards, and criteria; for projects in the nuclear and nonnuclear areas. During 1976 the major emphasis was on developing criteria, instruments and methods to assure that radiation exposure to occupational personnel and to people in the environs of nuclear-related facilities is maintained at the lowest level technically and economically practicable. Progress in 1976 is reported on the preparation of guidelines for radiation exposure; Pu dosimetry studies; the preparation of an environmental monitoring handbook; and emergency instrumentation preparedness

  10. DOE standard: Radiological control

    International Nuclear Information System (INIS)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ''Occupational Radiation Protection''. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835

  11. DOE standard: Radiological control

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  12. 48 CFR 352.223-70 - Safety and health.

    Science.gov (United States)

    2010-10-01

    ... laboratories; and other applicable occupational health and safety standards issued by OSHA and included in 29... Commission Standards and Regulations, pursuant to the Energy Reorganization Act of 1974 (42 U.S.C. 5801 et... health and safety operating procedures and practices for both personnel and facilities: (i) Biosafety in...

  13. Representation of occupational information across resources and validation of the occupational data for health model.

    Science.gov (United States)

    Rajamani, Sripriya; Chen, Elizabeth S; Lindemann, Elizabeth; Aldekhyyel, Ranyah; Wang, Yan; Melton, Genevieve B

    2018-02-01

    Reports by the National Academy of Medicine and leading public health organizations advocate including occupational information as part of an individual's social context. Given recent National Academy of Medicine recommendations on occupation-related data in the electronic health record, there is a critical need for improved representation. The National Institute for Occupational Safety and Health has developed an Occupational Data for Health (ODH) model, currently in draft format. This study aimed to validate the ODH model by mapping occupation-related elements from resources representing recommendations, standards, public health reports and surveys, and research measures, along with preliminary evaluation of associated value sets. All 247 occupation-related items across 20 resources mapped to the ODH model. Recommended value sets had high variability across the evaluated resources. This study demonstrates the ODH model's value, the multifaceted nature of occupation information, and the critical need for occupation value sets to support clinical care, population health, and research. © The Author 2017. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Raising occupational safety - an exceptionally important top rank task

    Energy Technology Data Exchange (ETDEWEB)

    1986-09-01

    Comments on the Consulting Meeting on Safety at Work and Fire Prevention in the state association Energetika, held at the Bobov Dol coal mine on 27.7.1986. The main report, submitted by S. Mishev, manager of the state inspectorate, stated that in 1985 working conditions of 1,074 employees improved significantly and the number of accidents among workers was reduced by a coefficient of 1.92 points compared to 1984. Thirty-eight million levs were spent on improving occupational safety (reducing dust, noise and vibration levels). Measures aimed at preventing fires, in particular at the Maritsa-Iztok briquetting plant and in the Babino coal mine were improved significantly (fire-resistant support of mainroads, backfilling and isolation of goaf, application of anti-pyrogens, methane drainage, remote methane control, etc.). The number of annual inspections by safety inspectors has increased to 9,000. Coefficient of absenteeism due to bodily injury has been reduced by 40.57 points. Dust exposure of miners has also been reduced.

  15. Recommendation for an European wind turbine safety standard

    Energy Technology Data Exchange (ETDEWEB)

    Hjuler Jensen, P.; Hauge Madsen, P.; Winther-Jensen, M.; Machielse, L.; Stam, W.; Einsfeld, V.; Woelfel, E.; Elliot, G.; Wilde, L. de

    1988-09-15

    The objective is to establish an European standard for wind safety which should apply for all member countries of the European Communities. The document contains a list of recommended safety requirements in relation to the system, structure, electrical installations, operation and maintenance of wind turbines. The recommended safety standards cover electricity producing wind turbines connected to electricity grids in both single and cluster applications and with a swept area in excess of 25 square meters and/or a rated power of 10kW. The document should be used in combination with The European Standards for Wind Turbine Loads and other relevant European Standards. Environmental condition, with the emphasis of wind conditions and more extreme climatic conditions, are also considered in relation to safety requirements. (AB).

  16. Occupational safety issues in residential construction surveyed in Wisconsin, United States.

    Science.gov (United States)

    Choi, Sang D; Carlson, Kathryn

    2014-01-01

    Residential construction is a high-risk industry in the U.S. due to the exposure to work-related safety hazards and fall injuries. This study aimed to examine the safety training and safe work practices of construction workers within the small residential construction industry. In order to achieve the study objectives, a survey was designed and sent to approximately 200 Wisconsin based residential construction contractors. About one third of the respondents stated that they did not have any form of safety programs. The study indicated that the most common types of work-related injuries in residential construction were slips/trips/falls and cuts/lacerations. The survey findings also suggested that the residential construction contractors needed to increase the utilization of fall protection safety equipment. Further education and subject matter expert training could provide benefits to improve occupational safety and health of the small business workforce in the residential construction industry.

  17. A Systematic Review of Community Health Workers' Role in Occupational Safety and Health Research.

    Science.gov (United States)

    Swanberg, Jennifer E; Nichols, Helen M; Clouser, Jessica M; Check, Pietra; Edwards, Lori; Bush, Ashley M; Padilla, Yancy; Betz, Gail

    2018-03-03

    We systematically reviewed the literature to describe how community health workers (CHWs) are involved in occupational health and safety research and to identify areas for future research and research practice strategies. We searched five electronic databases from July 2015 through July 2016. Inclusion criteria were as follows: (1) study took place in the United States, (2) published as a full peer-review manuscript in English, (3) conducted occupational health and safety research, and (4) CHWs were involved in the research. The majority of 17 included studies took place in the agriculture industry (76%). CHWs were often involved in study implementation/design and research participant contact. Rationale for CHW involvement in research was due to local connections/acceptance, existing knowledge/skills, communication ability, and access to participants. Barriers to CHW involvement in research included competing demands on CHWs, recruitment and training difficulties, problems about research rigor and issues with proper data collection. Involving CHWs in occupational health and safety research has potential for improving inclusion of diverse, vulnerable and geographically isolated populations. Further research is needed to assess the challenges and opportunities of involving CHWs in this research and to develop evidence-based training strategies to teach CHWs to be lay-health researchers.

  18. The IAEA radioactive waste safety standards programme

    International Nuclear Information System (INIS)

    Tourtellotte, James R.

    1995-01-01

    The IAEA is currently reviewing more than thirty publications in its Safety Series with a view toward consolidating and organizing information pertaining to radioactive waste. the effort is entitled Radioactive Waste Safety Standards programme (RADWASS). RADWASS is a significant undertaking and may have far reaching effects on radioactive waste management both in the international nuclear community and in individual nuclear States. This is because IAEA envisions the development of a consensus on the final document. In this circumstance, the product of RADWASS may ultimately be regarded as an international norm against which future actions of Member States may be measured. This program is organized in five subjects: planning, pre-disposal, disposal, uranium and thorium waste management and decommissioning, which has four levels: safety fundamentals, safety standards, safety guides and safety practices. (author)

  19. General philosophy of safety standards

    International Nuclear Information System (INIS)

    Dunster, H.J.

    1987-01-01

    Safety standards should be related to the form and magnitude of the risk they aim to limit. Because of the lack of direct information at the exposure levels experienced, radiation protection standards have to be based on risk assumptions that, while plausible, are not proven. The pressure for standards has come as much from public perceptions and fears as from the reality of the risk. (author)

  20. Occupational safety and health in Indonesia = Keselamatan dan kesehatan kerja di Indonesia

    OpenAIRE

    Markkanen, Pia K

    2004-01-01

    Reviews key issues in occupational safety and health in Indonesia. Examines policies and regulations, administration and enforcement, key agencies, research, training and information activities and international networking. Addresses issues for workers in hazardous industries and in the informal economy and makes recommendations for future activities.

  1. Occupational safety and health management in the construction industry: a review.

    Science.gov (United States)

    Jaafar, Mohd Hafiidz; Arifin, Kadir; Aiyub, Kadaruddin; Razman, Muhammad Rizal; Ishak, Muhammad Izzuddin Syakir; Samsurijan, Mohamad Shaharudin

    2017-09-11

    The construction industry plays a significant role in contributing to the economy and development globally. During the process of construction, various hazards coupled with the unique nature of the industry contribute to high fatality rates. This review refers to previous published studies and related Malaysian legislation documents. Four main elements consisting of human, worksite, management and external elements which cause occupational accidents and illnesses were identified. External and management elements are the underlying causes contributing to occupational safety and health (OSH), while human and worksite elements are more apparent causes of occupational accidents and illnesses. An effective OSH management approach is required to contain all hazards at construction sites. An approach to OSH management constructed by elements of policy, process, personnel and incentive developed in previous work is explored. Changes to the sub-elements according to previous studies and the related Malaysian legislation are also covered in this review.

  2. Biological Monitoring Prospects in Occupational and Environmental Medicine

    CERN Document Server

    Angerer, Jürgen

    2003-01-01

    At the invitation of the Deutsche Forschungsgemeinschaft (DFG), a round-table discussion was held on 9 and 10 March 2000, dealing with future possibilities for biomonitoring in occupational and environmental medicine. Biomonitoring has reached a high standard in Germany over the past 30 years, not least due to the fact that the results of the Senate commission on materials hazardous to health at the workplace have been directly implemented as part of the jurisdiction relating to occupational safety. This book combines the expertise gathered from various areas within toxicology, occupational me

  3. The Occupational Safety and Health Act: Its Goals and Its Achievements. Evaluative Studies Series.

    Science.gov (United States)

    Smith, Robert Stewart

    The safety and health mandate of the Occupational Safety and Health Act of 1970 is examined in reference to its effectiveness in reducing injuries and its consistency with the goal of promoting general welfare. Chapter 1 describes the essential features of the act and its administration to date, and analyzes the mandate as revealed by legislative…

  4. Developing regulations for occupational exposures to health hazards in Malaysia.

    Science.gov (United States)

    Rampal, Krishna Gopal; Mohd Nizam, J

    2006-11-01

    In Malaysia exposures in the workplace are regulated under the Factories and Machinery Act (FMA), 1967 and also under the more comprehensive Occupational Safety and Health Act (OSHA) enacted in 1994. With OSHA 1994 the philosophy of legislating safety and health in the workplace changed from one that was very prescriptive and containing detailed technical provisions under FMA, 1967 to one that is more flexible and encourages self-regulation under OSHA 1994. OSHA 1994 is supported by regulations, codes of practices and guidelines to further clarify the provisions in the Act. Under the FMA 1967 emphasis was on safety while with OSHA 1994 there has been equal emphasis on addressing health hazards in the workplace. Regulations for occupational exposures are developed by the Department of Occupational Safety and Health with tripartite and stakeholder consultation. When developing these regulations International Labor Organization Conventions, laws of other countries and occupational exposure standards adopted internationally are reviewed. The government also conducts surveys to collect information on both exposures and health effects in workplaces to have better understanding on specific occupational health problems. Effective law enforcement is crucial in ensuring compliance to safety and health law. The challenge at the moment is to ensure all employers and employees, particularly those in the small and medium enterprises, understand and comply with the provisions stipulated in the legislation.

  5. DOE interpretations Guide to OSH standards. Update to the Guide

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-31

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued it`s support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal in letter written by OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

  6. DOE interpretations Guide to OSH standards. Update to the Guide

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-31

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued its support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal interpretation letters written by OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

  7. DOE interpretations Guide to OSH standards. Update to the Guide

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-31

    Reflecting Secretary O`Leary`s focus on occupational safety and health, the Office of Occupational Safety is pleased to provide you with the latest update to the DOE Interpretations Guide to OSH Standards. This Guide was developed in cooperation with the Occupational Safety and Health Administration, which continued its support during this last revision by facilitating access to the interpretations found on the OSHA Computerized Information System (OCIS). This March 31, 1994 update contains 123 formal interpretation letters written OSHA. As a result of the unique requests received by the 1-800 Response Line, this update also contains 38 interpretations developed by DOE. This new occupational safety and health information adds still more important guidance to the four volume reference set that you presently have in your possession.

  8. Identification of competencies for Malaysian occupational safety and health professionals.

    Science.gov (United States)

    Daud, Rabaayah; Ismail, Maimunah; Omar, Zoharah

    2010-01-01

    Competencies of occupational safety and health (OSH) professionals have become a concern due to the significance of safety management in the field of safety engineering. The purpose of this article is to identify competencies needed by OSH professionals. These competencies are required by professionals in administrating and enforcing legislations related to OSH in Malaysia. This study used Delphi technique in three rounds of data collection. The benefits of this research approach are the use of experts in gaining opinions without time and geographical restraints. The results show 25 generic competencies with combinations of cognitive, interpersonal and intrapersonal competencies and 33 functional or specific competencies including knowledge and skills needed by OSH professionals. Both generic and functional competencies are also divided into threshold and differentiating competencies that would be used to differentiate average and excellent performance of OSH professionals.

  9. 77 FR 3798 - Asbestos in Construction Standard; Extension of the Office of Management and Budget's (OMB...

    Science.gov (United States)

    2012-01-25

    ... Construction Standard (29 CFR 1926.1101). The standard protects workers from adverse health effects from... standard protects workers from adverse health effects from occupational exposure to asbestos, including... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0002...

  10. The American Association of Occupational Health Nurses' Respiratory Protection Education Program and Resources Webkit for Occupational Health Professionals.

    Science.gov (United States)

    Pompeii, Lisa; Byrd, Annette; Delclos, George L; Conway, Sadie H

    2016-12-01

    Organizations are required to adhere to the Occupational Safety and Health Administration's (OSHA) Respiratory Protection Standard (29 CFR 1910.134) if they have workers that wear a respirator on the job. They must also have an employee "suitably trained" to administer their program. The National Institute for Occupational Safety and Health and its National Personal Protective Technology Laboratory have worked to champion the occupational health nurse in this role by collaborating with the American Association of Occupational Health Nurses to develop free, online respiratory protection training and resources (RPP Webkit). This article describes the development, content, and success of this training. To date, 724 participants have completed the training, 32.6% of whom lead their organization's respiratory protection program, 15.3% who indicated they will lead a program in the near future, and 52% who did not lead a program, but indicated that the training was relevant to their work. The majority "strongly agreed" the training was applicable to their work and it enhanced their professional expertise. © 2016 The Author(s).

  11. All About OSHA: The Who, What, Where, When, Why and How of the Occupational Safety and Health Act of 1970.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    The pamphlet summarizes the operations of the Occupational Safety and Health Administration (OSHA) and the provisions of the Occupational Safety and Health Act of 1970. OSHA's mission is to assure safe and healthful working conditions and to preserve human resources. Employers and employees who are covered by the act and employer and employee…

  12. Review of occupational safety and health activities in Southern Africa funded under the DANIDA/ILO framework agreement on technical cooperation

    DEFF Research Database (Denmark)

    Hasle, Peter; Jørgensen, Claus

    2003-01-01

    A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation.......A review of occupational safety and health activities in Southern Africa (SADC region) which have been funded under the DANIDA/ILO framework agreement on technical cooperation....

  13. OCCUPATIONAL HEALTH AND SAFETY ISSUES IN VICTORIAN CONSTRUCTION INDUSTRY, AUSTRALIA

    OpenAIRE

    M. Asad, Abdurrahman

    2010-01-01

    The construction industry has one of the highest injury ratios of all Australian industries. Individuals employed on the construction industries find themselves confronted with dangerous and life-threatening work conditions. However, it appears that the trend in Occupational Health and Safety (OHS) performance of construction industry has improved consistently compared with the other industries. The enforcement of OHS law and regulation, and the outcome of authority function to assist and pro...

  14. IAEA safety standards and approach to safety of advanced reactors

    International Nuclear Information System (INIS)

    Gasparini, M.

    2004-01-01

    The paper presents an overview of the IAEA safety standards including their overall structure and purpose. A detailed presentation is devoted to the general approach to safety that is embodied in the current safety requirements for the design of nuclear power plants. A safety approach is proposed for the future. This approach can be used as reference for a safe design, for safety assessment and for the preparation of the safety requirements. The method proposes an integration of deterministic and risk informed concepts in the general frame of a generalized concept of safety goals and defence in depth. This methodology may provide a useful tool for the preparation of safety requirements for the design and operation of any kind of reactor including small and medium sized reactors with innovative safety features.(author)

  15. Standardized safety management of AP1000 nuclear power plant

    International Nuclear Information System (INIS)

    Li Xingwen; Cao Zhiqiang; Cong Jiuyuan

    2011-01-01

    In 2002, China published and implemented the Law of the People's Republic of China on Work Safety and promulgated a series of guidelines and policies, which strengthened the safety management supervision. Standardization of safety, as another important step on safety supervision, comes after safety assesment and safety production licensing system, is also a permanent solution. Standardization of safety is a strategic, long term and fundamental work, which is also the basic access to achieving scientific safety management and increasing the inherent safety of an enterprise. Haiyang AP1000 nuclear power plant, adopting the modularized, 'open-top' and parallel construction means, overturned the traditional construction theory of installation work comes after the civil work and greatly shorten the construction period. At the same time, the notable increase of oversize module transportation and lifting and parallel construction raises higher demands for safety management. This article combines the characteristics and difficulties of safety management for Haiyang AP1000 nuclear power plant, puts forward ideas and methods for standardized safety management, and could also serve as reference to the safety management for other AP1000 projects. (authors)

  16. Positioning radiation safety in occupational safety and health programme in an organization[RPO - radiation protection officer

    Energy Technology Data Exchange (ETDEWEB)

    Onn, Abed Bin [National Inst. of Occupational Safety and Health, Bangi (Malaysia)

    2000-07-01

    The Atomic Energy Licensing Act 1984, which is under purview of the Ministry of Science, Technology and Environment, and Occupational Safety and Health Act, OSHA 1994, under Ministry of Human Resources were discussed. RPO responsibilities were discussed in detailed. As the conclusion, organization which complies with the provisions of the AELA 1984 are well on the way to complying the requirements of OSHA 1994.

  17. OCCUPATIONAL SAFETY AND HEALTH– VECTOR OF CORPORATE SOCIAL RESPONSIBILITY IN ROMANIAN COMPANIES

    Directory of Open Access Journals (Sweden)

    Geanina Constanța SPĂTARU (PRAVĂȚ

    2015-11-01

    The purpose of this article is to investigate the local reports of the corporate social responsibility of the companies that function in Romania, through their own web page and to make an analysis of the occupational safety and health component as presented in the CSR reports of these companies.

  18. Implementation of the chemicals regulation REACH : Exploring the impact on occupational health and safety management among Swedish downstream users

    OpenAIRE

    Schenk, Linda; Antonsson, Ann-Beth

    2015-01-01

    In the present study we have examined how the European chemicals regulation Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) has influenced occupational risk management of chemicals at Swedish downstream user companies. The data were collected through interviews with occupational health and safety professionals, safety representatives and authority employees. The results show that most of the informants had scarce knowledge about REACH and that REACH implementation...

  19. Economic evaluation of occupational safety preventive measures in a hospital.

    Science.gov (United States)

    Ramos, Delfina G; Arezes, Pedro M; Afonso, Paulo

    2015-01-01

    When an organization performs an integrated analysis of risks through its Occupational Health and Safety Management System, several steps are suggested to address the implications of the identified risks. Namely, the organization should make a detailed analysis of the monetary impact for the organization of each of the preventive measures considered. However, it is also important to perform an analysis of the impact of each measure on society (externalities). The aim of this paper is to present a case study related to the application of the proposed economic evaluation methodology. An analysis of the work accidents in a hospital has been made. Three of the major types of accidents have been selected: needle stings, falls and excessive strain. Following the risk assessment, some preventive measures have been designed. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organization's perspective) and in economic terms (including the benefits for the worker and for the Society). While the financial ratio is only advantageous in some cases, when the externalities are taken into account, the B/C ratio increases significantly. It is important to consider external benefits to make decisions concerning the implementation of preventive measures in Occupational Health and Safety projects.

  20. Civilian law: from occupational medicine to occupational event.

    Science.gov (United States)

    Mpotos, N; Watelet, J B

    Civilian law:from occupational medicine to occupational event. Despite the growing importance of objective measurements, the health effects of many occupational risk factors are currently not fully quantified. Occupational noise, as a widespread risk factor, is illustrative in this regard; there is a strong body of evidence linking it to an important health outcome (hearing loss), but it is less decisively associated with others (such as psychological disorders). It is also distinct from environmental noise, and therefore falls under the responsibility of employers as well as individuals. Noise-induced hearing loss (NIHL) is, at present, incurable and irreversible. However, it is preventable, if effective and global hearing conservation programmes can be implemented. These programmes should not be isolated efforts, but should be integrated into the overall hazard prevention and control programme of the workplace. Belgian law encompasses a set of provisions for prevention and the protection of the health and safety of workers within the workplace, including aspects pertaining to the hygiene of the workplace and psychosocial aspects at work (stress, violence, bullying and sexual harassment, among others). In principle, combating environmental noise is fully addressed in this country. However, other levels of policy-making also play an important role in this regard. For example, the federal government is in charge of product standards, and therefore also of noise emission standards for products. The interpretation and enforcement of Belgian legislation on well-being at work converts European directives and international agreements on well-being at work into Belgian law.

  1. Selecting safety standards for nuclear power plants

    International Nuclear Information System (INIS)

    1981-01-01

    Today, many thousands of documents are available describing the requirements, guidelines, and industrial standards which can be used as bases for a nuclear power plant programme. Many of these documents relate to nuclear safety which is currently the focus of world-wide attention. The multitude of documents available on the subject, and their varying status and emphasis, make the processes of selection and implementation very important. Because nuclear power plants are technically intricate and advanced, particularly in relation to the technological status of many developing countries, these processes are also complicated. These matters were the subject of a seminar held at the Agency's headquarters in Vienna last December. The IAEA Nuclear Safety Standards (NUSS) programme was outlined and explained at the Seminar. The five areas of the NUSS programme for nuclear power plants cover, governmental organization, siting, design; operation; quality assurance. In each area the Agency has issued Codes of Practice and is developing Safety Guides. These provide regulatory agencies with a framework for safety. The Seminar recognized that the NUSS programme should enable developing countries to identify priorities in their work, particularly the implementation of safety standards. The ISO activities in the nuclear field are carried out in the framework of its Technical Committee 85 (ISO/TC85). The work is distributed in sub-committees. Seminar on selection and implementation of safety standards for nuclear power plants, jointly organized by the IAEA and the International Organization for Standardization (ISO), and held in Vienna from 15 to 18 December 1980 concerned with: terminology, definitions, units and symbols (SC-1), radiation protection (SC-2), power reactor technology (SC-3), nuclear fuel technology (SC-5). There was general agreement that the ISO standards are complementary to the NUSS codes and guides. ISO has had close relations with the IAEA for several years

  2. Radiation cancer, safety standards and current levels of exposure

    International Nuclear Information System (INIS)

    Mole, R.H.

    1976-01-01

    Cancer can be induced by radiation in any tissue where cancer occurs naturally. The observation that antenatal diagnostic radiography causes a small but definite increase in childhood cancer is as good evidence as could be expected in support of the scientific expectation that there would be no threshold of dose for carcinogenesis. A linear relation between radiation dose and frequency of induced cancer is a necessary assumption for a system of radiological protection but is not necessarily a reasonable basis for realistic assessments of cancer risk. Indeed there are radiobiological and epidemiological reasons to the contrary. If the linear hypothesis is accepted then at the present time in the UK the routine practice of medicine is of about 2 orders of magnitude more important in causing cancer than environmental pollution by discharge of radio-activity. The acceptability of radiation safety standards for occupational exposure may be justified by comparison of radiation cancer risks with risks from fatal accidents in the safer industries. The acceptability of the corresponding standards for members of the public seems to require more public discussion of the concept of negligible risk. Emotional reactions to uncontrolled releases of radio-activity are based at least in part on a failure to appreciate the hypothesis of linearity

  3. 77 FR 61431 - Hexavalent Chromium Standards; Extension of the Office of Management and Budget's (OMB) Approval...

    Science.gov (United States)

    2012-10-09

    ... Construction (29 CFR 1926.1126) (the ``Standards'') protect workers from the adverse health effects that may... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0034... Information Collection (Paperwork) Requirements AGENCY: Occupational Safety and Health Administration (OSHA...

  4. Using in-depth investigations to identify transportation safety issues for wheelchair-seated occupants of motor vehicles.

    Science.gov (United States)

    Schneider, Lawrence W; Klinich, Kathleen D; Moore, Jamie L; MacWilliams, Joel B

    2010-04-01

    In-depth investigations of motor-vehicle crashes involve detailed inspection, measurement, and photodocumentation of vehicle exterior and interior damage, evidence of belt-restraint use, and evidence of occupant contacts with the vehicle interior. Results of in-depth investigations thereby provide the most objective way to identify current and emerging injury problems and issues in occupant safety and crash protection, and provide important feedback on the real-world performance of the latest restraint-system and vehicle crashworthiness technologies. To provide an objective understanding of real-world transportation safety issues for wheelchair-seated travelers, the University of Michigan Transportation Research Institute (UMTRI) has been conducting and assembling data from in-depth investigations of motor-vehicle crashes and non-crash adverse moving-vehicle incidents, such as emergency vehicle braking, turning, and swerving, in which there was at least one vehicle occupant sitting in a wheelchair. The results of 39 investigations involving 42 wheelchair-seated occupants have been assembled and entered into a wheelchair-occupant crash/injury database. In addition, a biomechanical analysis of each case has been performed to identify key safety issues for wheelchair-seated travelers. The wheelchairs of 34 of the 42 occupants who were seated in wheelchairs while traveling in motor vehicles were effectively secured by either a four-point, strap-type tiedown system or a docking securement device, and all but one of these properly secured wheelchairs remained in place during the crash or non-collision event. However, 30 of the 42 occupants were improperly restrained, either because of non-use or incomplete use of available belt restraints, or because the belt restraints were improperly positioned on the occupant's body. Twenty-six of the 42 occupants sustained significant injuries and 10 of these occupants died as a direct result of injuries sustained, or from

  5. Best Estimate plus Uncertainty (BEPU) Analyses in the IAEA Safety Standards

    International Nuclear Information System (INIS)

    Dusic, Milorad; )

    2013-01-01

    The Safety Standards Series establishes an essential basis for safety and represents the broadest international consensus. Safety Standards Series publications are categorized into: Safety Fundamental (Present the overall objectives, concepts and principles of protection and safety, they are the policy documents of the safety standards), Safety Requirements (Establish requirements that must be met to ensure the protection and safety of people and the environment, both now and in the future), and Safety Guides (Provide guidance, in the form of more detailed actions, conditions or procedures that can be used to comply with the Requirements). The incorporation of more detailed requirements, in accordance with national practice, may still be necessary. There should be only one set of international safety standards. Each safety standard will be reviewed by the relevant committee or by the commission every five years. Best Estimate plus Uncertainty (BEPU) Analyses are approached in the following IAEA Safety Standards: - Safety Requirements SSR 2/1 - Safety of NPPs, Design (Revision of NS-R-1); - General Safety Requirement GSR Part 4: Safety Assessment for Facilities and Activities; - Safety Guide SSG-2 Deterministic Safety Analysis for Nuclear Power Plants. NUSSC suggested that new safety guides should be accompanied by documents like TECDOCs or Safety Reports describing in detail their recommendations where appropriate. Special review is currently underway to identify needs for revision in the light of the Fukushima accident. Revision will concern, first, the Safety Requirements, and then, the Selected Safety Guides

  6. New quantitative safety standards: different techniques, different results?

    International Nuclear Information System (INIS)

    Rouvroye, J.L.; Brombacher, A.C.

    1999-01-01

    Safety Instrumented Systems (SIS) are used in the process industry to perform safety functions. Many factors can influence the safety of a SIS like system layout, diagnostics, testing and repair. In standards like the German DIN no quantitative analysis is demanded (DIN V 19250 Grundlegende Sicherheitsbetrachtungen fuer MSR-Schutzeinrichtungen, Berlin, 1994; DIN/VDE 0801 Grundsaetze fuer Rechner in Systemen mit Sicherheitsaufgaben, Berlin, 1990). The analysis according to these standards is based on expert opinion and qualitative analysis techniques. New standards like the IEC 61508 (IEC 61508 Functional safety of electrical/electronic/programmable electronic safety-related systems, IEC, Geneve, 1997) and the ISA-S84.01 (ISA-S84.01.1996 Application of Safety Instrumented Systems for the Process Industries, Instrument Society of America, Research Triangle Park, 1996) require quantitative risk analysis but do not prescribe how to perform the analysis. Earlier publications of the authors (Rouvroye et al., Uncertainty in safety, new techniques for the assessment and optimisation of safety in process industry, D W. Pyatt (ed), SERA-Vol. 4, Safety engineering and risk analysis, ASME, New York 1995; Rouvroye et al., A comparison study of qualitative and quantitative analysis techniques for the assessment of safety in industry, P.C. Cacciabue, I.A. Papazoglou (eds), Proceedings PSAM III conference, Crete, Greece, June 1996) have shown that different analysis techniques cover different aspects of system behaviour. This paper shows by means of a case study, that different (quantitative) analysis techniques may lead to different results. The consequence is that the application of the standards to practical systems will not always lead to unambiguous results. The authors therefore propose a technique to overcome this major disadvantage

  7. 76 FR 34890 - Track Safety Standards; Concrete Crossties

    Science.gov (United States)

    2011-06-15

    ...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

  8. Design of the system of maintenance operations occupational safety and health database application of nuclear power station

    International Nuclear Information System (INIS)

    Wang Xuehong; Li Xiangyang; Ye Yongjun

    2011-01-01

    Based on the KKS code of building equipment in nuclear power station, this paper introduces the method of establishing the system of maintenance operation occupational safety and health database application. Through the application system of maintenance occupational safety and health database, it can summarize systematically all kinds of maintenance operation dangerous factor of nuclear power station, and make a convenience for staff to learn the maintenance operation dangerous factors and the prevention measures, so that it can achieve the management concept of 'precaution crucial, continuous improvement' that advocated by OSHMS. (authors)

  9. Radiation safety: New international standards

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    1994-01-01

    This article highlights an important result of this work for the international harmonization of radiation safety: specifically, it present an overview of the forthcoming International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources - the so-called BSS. They have been jointly developed by six organizations - the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (NEA/OECD), the Pan American Health Organization (PAHO), and the World Health Organization (WHO)

  10. Hospital support services and the impacts of outsourcing on occupational health and safety.

    Science.gov (United States)

    Siganporia, Pearl; Astrakianakis, George; Alamgir, Hasanat; Ostry, Aleck; Nicol, Anne-Marie; Koehoorn, Mieke

    2016-10-01

    Outsourcing labor is linked to negative impacts on occupational health and safety (OHS). In British Columbia, Canada, provincial health care service providers outsource support services such as cleaners and food service workers (CFSWs) to external contractors. This study investigates the impact of outsourcing on the occupational health safety of hospital CFSWs through a mixed methods approach. Worker's compensation data for hospital CFSWs were analyzed by negative binomial and multiple linear regressions supplemented by iterative thematic analysis of telephone interviews of the same job groups. Non-significant decreases in injury rates and days lost per injury were observed in outsourced CFSWs post outsourcing. Significant decreases (P outsourcing. Outsourced workers interviewed implied instances of underreporting workplace injuries. This mixed methods study describes the impact of outsourcing on OHS of healthcare workers in British Columbia. Results will be helpful for policy-makers and workplace regulators to assess program effectiveness for outsourced workers.

  11. The biological basis of plutonium safety standards

    International Nuclear Information System (INIS)

    Mole, R.H.

    1976-01-01

    Since no radiation injury or cancer in man can, as yet, be directly attributed to Pu, all safety standards for Pu must be determined by reference to other safety standards, development of which is discussed. A system of safety standards must be based on links with real damage, such as the requirement for 226 Ra in bone. The type of biological information required for making standards realistic is considered in relation to Pu and Ra in bone. Also considered are the possible effects of Pu in soft tissue such as bone marrow. Not only dose, but also the number of cells exposed to the dose are important biologically and cellular aspects are examined. Since there is no positive evidence of Pu toxicity relevant information on other α emitters must be examined. The observed effectiveness of Ra, daughters of 222 Ra and 232 Th in causing mutations and cancer, is surveyed. Reference is made to the necessity of improving the ICRP system, currently based on the critical organ concept, by recognising the need for summation of risks in other organs where exposure to Pu is concerned. Improved biological understanding particularly that of hereditary damage, in recent years leads to less pessimistic thinking on the effects of ionizing radiations. The immediate need appears to be for consistency in safety standards. (U.K.)

  12. Elevating standards, improving safety.

    Science.gov (United States)

    Clarke, Richard

    2014-08-01

    In our latest 'technical guidance' article, Richard Clarke, sales and marketing director at one of the UK's leading lift and escalator specialists, Schindler, examines some of the key issues surrounding the specification, maintenance, and operation of lifts in hospitals to help ensure the highest standards of safety and reliability.

  13. Participation in the management of occupational health and safety improvement : workers'investigation as active risk analysis

    NARCIS (Netherlands)

    Buitelaar, W.L.

    1989-01-01

    In this report the initiating involvement of workers on health and safety at the workplace and on the quality of working life has been underlined. Workers' investigation in this matter is viewed as an additional form of risk management. Covering: occupational health and safety as a social

  14. Business Financial Occupations: Skill Standards.

    Science.gov (United States)

    Vocational Technical Education Consortium of States, Decatur, GA.

    This report organizes the information provided by 71 individuals in finance-related occupations in 11 states into skills inventories for persons in these jobs. The skills inventories contain the following sections: (1) occupation-specific knowledge (communication, mathematics, science); (2) workplace behaviors (work ethics, interpersonal…

  15. What do healthcare workers in elderly care know about occupational health and safety? An explorative survey.

    Science.gov (United States)

    Schönrock, Stefanie; Schablon, Anja; Nienhaus, Albert; Peters, Claudia

    2015-01-01

    Demographic changes will lead to a growing demand for healthy, motivated healthcare workers (HCW) in the years ahead. Along with well-targeted prevention, knowledge of occupational health and safety and infection precaution is essential for a healthy working life. In this context back-friendly working methods and protection from infectious diseases are necessary in elderly care. In 2012, a survey was conducted in nine residential and two semi-residential nursing homes, as well as in one home care service in the Schwerin area of northeast Germany. Four hundred and seventy three HCWs were asked to fill in a questionnaire on what they knew about aspects of occupational health and safety such as vaccinations and preventative measures administered by occupational physicians, hygiene, back-friendly working methods and infection prevention. The statistical evaluation was descriptive, with a comparison between job title. Differences were examined with chi square or Fisher's exact test. The response rate was 28 % (n = 132). The largest group of respondents (36 %) were qualified geriatric HCWs. More than 74 % of employees felt well informed about opportunities for precautionary checks and vaccination by occupational physician, and 93 % utilized these opportunities. When it came to assigning modes of transmission to specific infectious diseases, only 23 % of participants were well informed, and one in three (31 %) care assistants was inadequately informed. Fewer than half of participants could correctly name the indications for hand disinfection. Only 66 % of the HCWs said they were aware of training offers for the management of multidrug-resistant organisms in their institution. They did know about possible aids to back-friendly working, although gaps in knowledge were apparent. Only 59 % of respondents knew that care utensils should preferably be stored at working height so as to reduce awkward body postures. Employees in elderly care are well informed about the

  16. Agricultural Health and Safety

    Science.gov (United States)

    ... that occur while living, working, or visiting agricultural work environments (primarily farms) are considered agricultural injuries, whether or ... of Labor's Occupational Safety & Health Administration (OSHA) supports safe and healthful working conditions by setting and enforcing standards and by ...

  17. 75 FR 50958 - Federal Motor Vehicle Safety Standards; Motorcoach Definition; Occupant Crash Protection

    Science.gov (United States)

    2010-08-18

    ... operated over 33,000 motorcoaches, they logged nearly 750 million passenger trips, and they traveled over 1..., and Puerto Rico. To be included in FARS, a crash must involve a motor vehicle traveling on a traffic...-occupant within 30 days of the crash. Motorcoaches are identified in FARS as ``cross-country intercity...

  18. Steps to Ensure a Successful Implementation of Occupational Health and Safety Interventions at an Organizational Level

    Science.gov (United States)

    Herrera-Sánchez, Isabel M.; León-Pérez, José M.; León-Rubio, José M.

    2017-01-01

    There is increasing meta-analytic evidence that addresses the positive impact of evidence-based occupational health and safety interventions on employee health and well-being. However, such evidence is less clear when interventions are approached at an organizational level and are aimed at changing organizational policies and processes. Given that occupational health and safety interventions are usually tailored to specific organizational contexts, generalizing and transferring such interventions to other organizations is a complex endeavor. In response, several authors have argued that an evaluation of the implementation process is crucial for assessing the intervention’s effectiveness and for understanding how and why the intervention has been (un)successful. Thus, this paper focuses on the implementation process and attempts to move this field forward by identifying the main factors that contribute toward ensuring a greater success of occupational health and safety interventions conducted at the organizational level. In doing so, we propose some steps that can guide a successful implementation. These implementation steps are illustrated using examples of evidence-based best practices reported in the literature that have described and systematically evaluated the implementation process behind their interventions during the last decade. PMID:29375413

  19. Steps to Ensure a Successful Implementation of Occupational Health and Safety Interventions at an Organizational Level

    Directory of Open Access Journals (Sweden)

    Isabel M. Herrera-Sánchez

    2017-12-01

    Full Text Available There is increasing meta-analytic evidence that addresses the positive impact of evidence-based occupational health and safety interventions on employee health and well-being. However, such evidence is less clear when interventions are approached at an organizational level and are aimed at changing organizational policies and processes. Given that occupational health and safety interventions are usually tailored to specific organizational contexts, generalizing and transferring such interventions to other organizations is a complex endeavor. In response, several authors have argued that an evaluation of the implementation process is crucial for assessing the intervention’s effectiveness and for understanding how and why the intervention has been (unsuccessful. Thus, this paper focuses on the implementation process and attempts to move this field forward by identifying the main factors that contribute toward ensuring a greater success of occupational health and safety interventions conducted at the organizational level. In doing so, we propose some steps that can guide a successful implementation. These implementation steps are illustrated using examples of evidence-based best practices reported in the literature that have described and systematically evaluated the implementation process behind their interventions during the last decade.

  20. Training Requirements in OSHA Standards. Revised.

    Science.gov (United States)

    Occupational Safety and Health Administration, Washington, DC.

    This booklet contains excerpts of the training-related requirements of the standards promulgated by the Occupational Safety and Health Administration (OSHA). It is designed as an aid for employers, safety and health professionals, and others who need to know training requirements. (References to training may be difficult to locate in the long and…

Some links on this page may take you to non-federal websites. Their policies may differ from this site.