Fruit anatomy of species of Solanum sect. Torva (Solanaceae Anatomía del fruto en especies de Solanum sect. Torva (Solanaceae

Directory of Open Access Journals (Sweden)

Franco E. Chiarini

2010-12-01

Full Text Available The mature fruits of 10 South American species of Solanum sect. Torva were studied. Cross and longitudinal microtome sections, stained with astra blue/basic fuchsin, were made for microscopic examination. All species present an epidermis formed by a unistrate layer of small, isodiametric cells, with dense content and cellulosic walls. Immediately below, a hypodermis is always found, consisting of a well-defined layer of lignified cells with a single calcium oxalate crystal occupying the whole lumen of each cell. This is followed by one layer of cellulosic, isodiametric cells with dense cytoplasm and then several collenchymatous layers, sometimes with sclerified cell walls. The mesocarp comprises two zones histologically differentiated: an external one (formed by regular, vacuolated, medium-sized cells with small intercellular spaces, and an internal one, commonly juicy, and developing proliferations among the seeds. The fruits analyzed are alike, and despite some particularities, they can be classified as berries in the conventional sense. All the traits examined agree with the ornithochorous dispersal syndrome. The homogeneity in fruit traits may be due to shared habit, habitat and sexual system.Se estudiaron los frutos maduros de 10 especies sudamericanas de Solanum sect. Torva. Se examinaron en microscopio cortes microtómicos transversales y longitudinales teñidos con azul astral/fucsina básica. Todas las especies presentaron una epidermis unistrata de células pequeñas, isodiamétricas, de contenido denso y paredes celulósicas. Inmediatamente por debajo se encontró siempre una hipodermis, formada por una capa bien definida de células lignificadas con un cristal de oxalato de calcio en el lúmen de cada célula. A continuación se halló otra capa de celulas isodiamétricas, celulósicas, de contenido denso, y luego varias capas de colénquima, en ocasiones con paredes esclerificadas. El mesocarpo presentó dos zonas histologicamente

Cytotaxonomy of North African species of Delphinium L. sect. Delphinium (Ranunculaceae

Directory of Open Access Journals (Sweden)

Blanché, César

1990-05-01

Full Text Available Both chromosome numbers and karyotype structure from 15 wild North-African populations of Delphinium L. sect. Delphinium were studied. Delphinium balansae Boiss. & Reuter, with a more symmetrical karyotype, appears as a possible perennial ancestor of' the remaining annuals with highly asymmetrical and shorter karyotype. A taxonomical reorganization of this section is proposed: two new series (ser. Macropetala ser. nova and ser. Balansae ser. nova. and two new nomenclatural combinations (D. nanum subsp. alboliliaceum and D. nanum subsp. elongatum are proposed.

S'han estudiat els nombres cromosòmics i l'estructura deis cariotipus de 15 poblacions nordafricanes de Delphinium L. sect. Delphinium. Delphinium balansae Boiss. & Reuter, amb cariotipus mes simètric, apareix com a possible ancestre perenne de la resta d’espècies anuals amb cariotipus més asimètric i més curt. Es proposa una reorganització taxonòmica de la secció, d'on es descriu en dues series noves (ser. Macropetala ser. nova i ser. Balansae ser. nova. i es proposen dues combinacions noves (D. nanum subsp. alboliliaceum and D. nanum subsp. elongatum.

Safety requirements laid down in the Atomic Energy Law and in the Law on Immission Control

International Nuclear Information System (INIS)

Hansmann, K.

1981-01-01

The paper deals with safety requirements relating to installations, laid down in the Atomic Energy Law and in the Law on Immission Control. Actually it is a matter of how the safety requirements of sect. 7 of the Atomic Energy Law can be compared with those laid down in the sections 5 and 6 of the Federal Act for the Protection Against Nuisances. In the process, three comparative levels are examined: 1. The normative conditions concerning the licencability of hazardous installations, 2. those demands that go way beyond that in order to reduce residual risks, and 3. the licensing authorities' scope of discretion. (orig./HP) [de

Begonia hosensis (sect. Reichenheimia, Begoniaceae, a new species from Sarawak, Malaysia

Directory of Open Access Journals (Sweden)

Che-Wei Lin

2014-12-01

Full Text Available Begonia hosensis, a new species of sect. Reichenheimia from Sarawak, Malaysia is here described and illustrated. Begonia hosensis resembles B. andersonii, differing in the stipule prominently keeled and female flower 5- (vs. 4- tepaled. Ecologically, the two species are also separable: B. hosensis occurs on granitic cliffs ca. 400 km east of Kuching, the only known locality of B. andersonii, a limestone species.

Large-spored Alternaria pathogens in section Porri disentangled

NARCIS (Netherlands)

Woudenberg, J H C; Truter, M; Groenewald, J Z; Crous, P W

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens

Large-spored Alternaria pathogens in section Porri disentangled

NARCIS (Netherlands)

Woudenberg, J.H.C.; Truter, M.; Groenewald, J.Z.; Crous, P.W.

2014-01-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens

[Polymorphism of KPI-A genes from plants of the subgenus Potatoe (sect. Petota, Estolonifera and Lycopersicum) and subgenus Solanum].

Science.gov (United States)

Krinitsyna, A A; Mel'nikova, N V; Belenikin, M S; Poltronieri, P; Santino, A; Kudriavtseva, A V; Savilova, A M; Speranskaia, A S

2013-01-01

Kunitz-type proteinase inhibitor proteins of group A (KPI-A) are involved in the protection of potato plants from pathogens and pests. Although sequences of large number of the KPI-A genes from different species of cultivated potato (Solanum tuberosum subsp. tuberosum) and a few genes from tomato (Solanum lycopersicum) are known to date, information about the allelic diversity of these genes in other species of the genus Solanum is lacking. In our work, the consensus sequences of the KPI-A genes were established in two species of subgenus Potatoe sect. Petota (Solanum tuberosum subsp. andigenum--5 genes and Solanum stoloniferum--2 genes) and in the subgenus Solanum (Solanum nigrum--5 genes) by amplification, cloning, sequencing and subsequent analysis. The determined sequences of KPI-A genes were 97-100% identical to known sequences of the cultivated potato of sect. Petota (cultivated potato Solanum tuberosum subsp. tuberosum) and sect. Etuberosum (S. palustre). The interspecific variability of these genes did not exceed the intraspecific variability for all studied species except Solanum lycopersicum. The distribution of highly variable and conserved sequences in the mature protein-encoding regions was uniform for all investigated KPI-A genes. However, our attempts to amplify the homologous genes using the same primers and the genomes of Solanum dulcamarum, Solanum lycopersicum and Mandragora officinarum resulted in no product formation. Phylogenetic analysis of KPI-A diversity showed that the sequences of the S. lycopersicum form independent cluster, whereas KPI-A of S. nigrum and species of sect. Etuberosum and sect. Petota are closely related and do not form species-specific subclasters. Although Solanum nigrum is resistant to all known races of economically one of the most important diseases of solanaceous plants oomycete Phytophthora infestans aminoacid sequences encoding by KPI-A genes from its genome have nearly or absolutely no differences to the same from

Reestablishment of Pycreus section Tuberculati (Cyperaceae)

NARCIS (Netherlands)

Reynders, M.; Goetghebeur, P.

2010-01-01

Pycreus sect. Tuberculati was created by Chermezon to contain a single species with derived nutlets: P. divulsus, a Malagasy endemic. Kükenthal transferred this species to his new section Muricati. However, a detailed study of the nutlet epidermis shows P. divulsus is not closely related to the

Phylogenetic analyses of Begonia sect. Coelocentrum and allied limestone species of China shed light on the evolution of Sino-Vietnamese karst flora.

Science.gov (United States)

Chung, Kuo-Fang; Leong, Wai-Chao; Rubite, Rosario Rivera; Repin, Rimi; Kiew, Ruth; Liu, Yan; Peng, Ching-I

2014-12-01

The picturesque limestone karsts across the Sino-Vietnamese border are renowned biodiversity hotspot, distinguished for extremely high endemism of calciphilous plants restricted to caves and cave-like microhabitats that have functioned as biological refugia on the otherwise harsh habitats. To understand evolutionary mechanisms underlying the splendid limestone flora, dated phylogeny is reconstructed for Asian Begonia, a species-rich genus on limestone substrates represented by no less than 60 species in southern China, using DNA sequences of nrITS and chloroplast rpL16 intron. The sampling includes 94 Begonia species encompassing most major Asian clades with a special emphasized on Chinese species. Except for two tuberous deciduous species and a species with upright stems, a majority of Sino-Vietnamese limestone Begonia (SVLB), including sect. Coelocentrum (19 species sampled) and five species of sect. Diploclinium, Leprosae, and Petermannia, are rhizomatous and grouped in a strongly supported and yet internally poorly resolved clade (Clade SVLB), suggesting a single evolutionary origin of the adaptation to limestone substrates by rhizomatous species, subsequent species radiation, and a strong tendency to retain their ancestral niche. Divergence-time estimates indicate a late Miocene diversification of Clade SVLB, coinciding with the onset of the East Asian monsoon and the period of extensive karstification in the area. Based on our phylogenetic study, Begonia sect. Coelocentrum is recircumscribed and expanded to include other members of the Clade SVLB (sect. Diploclinium: B. cavaleriei, B. pulvinifera, and B. wangii; sect. Leprosae: B. cylindrica and B. leprosa; sect. Petermannia: B. sinofloribunda). Because species of Clade SVLB have strong niche conservatism to retain in their ancestral habitats in cave-like microhabitats and Begonia are generally poor dispersers prone to diversify allopatrically, we propose that extensive and continuous karstification of the

Alternaria section Alternaria: Species, formae speciales or pathotypes'

NARCIS (Netherlands)

Woudenberg, J.H.C.; Seidl, M.F.; Groenewald, J.Z.; de Vries, M .; Stielow, B.; Thomma, B.P.H.J.; Crous, P.W.

2015-01-01

The cosmopolitan fungal genus Alternaria consists of multiple saprophytic and pathogenic species. Based on phylogenetic and morphological studies, the genus is currently divided into 26 sections. Alternaria sect. Alternaria contains most of the small-spored Alternaria species with concatenated

Alternaria section Alternaria: Species, formae speciales or pathotypes?

NARCIS (Netherlands)

Woudenberg, J.H.C.; Seidl, M.F.; Groenewald, J.Z.; Vries, de M.; Stielow, J.B.; Thomma, B.; Crous, P.W.

2015-01-01

The cosmopolitan fungal genus Alternaria consists of multiple saprophytic and pathogenic species. Based on phylogenetic and morphological studies, the genus is currently divided into 26 sections. Alternaria sect. Alternaria contains most of the small-spored Alternaria species with concatenated

Phylogeny of osmophillic aspergilli (subgenus Aspergillus) and taxonomic revision of section Restricti

Science.gov (United States)

Aspergillus section Restricti together with sister sect. Aspergillus (formerly Eurotium) comprises osmophilic species, that are able to grow on substrates with low water activity and in extreme environments. We addressed the monophyly of both sections within subgenus Aspergillus and applied multidis...

Corolla morphology influences diversification rates in bifid toadflaxes (Linaria sect. Versicolores)

Science.gov (United States)

Fernández-Mazuecos, Mario; Blanco-Pastor, José Luis; Gómez, José M.; Vargas, Pablo

2013-01-01

Background and Aims The role of flower specialization in plant speciation and evolution remains controversial. In this study the evolution of flower traits restricting access to pollinators was analysed in the bifid toadflaxes (Linaria sect. Versicolores), a monophyletic group of ∼30 species and subspecies with highly specialized corollas. Methods A time-calibrated phylogeny based on both nuclear and plastid DNA sequences was obtained using a coalescent-based method, and flower morphology was characterized by means of morphometric analyses. Directional trends in flower shape evolution and trait-dependent diversification rates were jointly analysed using recently developed methods, and morphological shifts were reconstructed along the phylogeny. Pollinator surveys were conducted for a representative sample of species. Key Results A restrictive character state (narrow corolla tube) was reconstructed in the most recent common ancestor of Linaria sect. Versicolores. After its early loss in the most species-rich clade, this character state has been convergently reacquired in multiple lineages of this clade in recent times, yet it seems to have exerted a negative influence on diversification rates. Comparative analyses and pollinator surveys suggest that the narrow- and broad-tubed flowers are evolutionary optima representing divergent strategies of pollen placement on nectar-feeding insects. Conclusions The results confirm that different forms of floral specialization can lead to dissimilar evolutionary success in terms of diversification. It is additionally suggested that opposing individual-level and species-level selection pressures may have driven the evolution of pollinator-restrictive traits in bifid toadflaxes. PMID:24142920

Large-spored Alternaria pathogens in section Porri disentangled.

Science.gov (United States)

Woudenberg, J H C; Truter, M; Groenewald, J Z; Crous, P W

2014-09-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens (e.g. Alternaria porri, A. solani and A. tomatophila). We constructed a multi-gene phylogeny on parts of the ITS, GAPDH, RPB2, TEF1 and Alt a 1 gene regions, which, supplemented with morphological and cultural studies, forms the basis for species recognition in sect. Porri. Our data reveal 63 species, of which 10 are newly described in sect. Porri, and 27 species names are synonymised. The three known Alternaria pathogens causing early blight on tomato all cluster in one clade, and are synonymised under the older name, A. linariae. Alternaria protenta, a species formerly only known as pathogen on Helianthus annuus, is also reported to cause early blight of potato, together with A. solani and A. grandis. Two clades with isolates causing purple blotch of onion are confirmed as A. allii and A. porri, but the two species cannot adequately be distinguished based on the number of beaks and branches as suggested previously. This is also found among the pathogens of Passifloraceae, which are reduced from four to three species. In addition to the known pathogen of sweet potato, A. bataticola, three more species are delineated of which two are newly described. A new Alternaria section is also described, comprising two large-spored Alternaria species with concatenate conidia.

75 FR 26266 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In...) Public Law 92-463. Purpose: The Safety and Occupational Health Study Section will review, discuss, and... cycles pertaining to research issues in occupational safety and health, and allied areas. It is the...

The Relationship Between Antecedent and Consequence Factors with Safety Behaviour in PT.X

OpenAIRE

Fitriani, Apris; Nawawiwetu, Erwin Dyah

2017-01-01

Background : Safety behaviour is an act worker to minimize the possibility of accidents in workplace. Based on the Antecedents-Behaviour-Consequence (ABC) theory, safety behaviour of worker related with the antecedent and consequence factors. Purpose : The purpose of this research was to study the association between antecedent and consequence factors with safety behaviour of workers in Ring Frame Unit Spinning II PT. X. Methods : This was an observational descriptive research with cross sect...

Nigeria and the Boko Haram Sect: Adopting a Better Strategy for Resolving the Crisis

Science.gov (United States)

2013-06-01

ed. Thomas A. Imobighe and Agatha N. T. Eguavoen (Ibadan Nigeria: Heinemann Education Books PLC, 2006), 7; Benjamin Maiangwa and Ufo O. Uzodike, “The...sect were lined up and shot in the back. 111 Hakeem Onapajo and Ufo O. Uzodike, “Boko Haram Terrorism in Nigeria: Man, the State, and the...of Management and Technology, 2008. Maiangwa, Benjamin and Ufo O. Uzodike. “The Changing Dynamics of Boko Haram Terrorism.” Aljazeera Centre for

77 FR 27776 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-05-11

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

76 FR 18220 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-04-01

... Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH) In... Services Office, CDC, pursuant to Public Law 92-463. Purpose: The Safety and Occupational Health Study... standard grants review and funding cycles pertaining to research issues in occupational safety and health...

Large-spored Alternaria pathogens in section Porri disentangled

OpenAIRE

Woudenberg, J.H.C.; Truter, M.; Groenewald, J.Z.; Crous, P.W.

2014-01-01

The omnipresent fungal genus Alternaria was recently divided into 24 sections based on molecular and morphological data. Alternaria sect. Porri is the largest section, containing almost all Alternaria species with medium to large conidia and long beaks, some of which are important plant pathogens (e.g. Alternaria porri, A. solani and A. tomatophila). We constructed a multi-gene phylogeny on parts of the ITS, GAPDH, RPB2, TEF1 and Alt a 1 gene regions, which, supplemented with morphological an...

The evolutionary history of Eugenia sect. Phyllocalyx (Myrtaceae) corroborates historically stable areas in the southern Atlantic forests.

Science.gov (United States)

de Oliveira Bünger, Mariana; Fernanda Mazine, Fiorella; Forest, Félix; Leandro Bueno, Marcelo; Renato Stehmann, João; Lucas, Eve J

2016-12-01

Eugenia sect. Phyllocalyx Nied. includes 14 species endemic to the Neotropics, mostly distributed in the Atlantic coastal forests of Brazil. Here the first comprehensive phylogenetic study of this group is presented, and this phylogeny is used as the basis to evaluate the recent infrageneric classification in Eugenia sensu lato (s.l.) to test the history of the evolution of traits in the group and test hypotheses associated with the history of this clade. A total of 42 taxa were sampled, of which 14 were Eugenia sect. Phyllocalyx for one nuclear (ribosomal internal transcribed spacer) and four plastid markers (psbA-trnH, rpl16, trnL-rpl32 and trnQ-rps16). The relationships were reconstructed based on Bayesian analysis and maximum likelihood. Additionally, ancestral area analysis and modelling methods were used to estimate species dispersal, comparing historically climatic stable (refuges) and unstable areas. Maximum likelihood and Bayesian inferences indicate that Eugenia sect. Phyllocalyx is paraphyletic and the two clades recovered are characterized by combinations of morphological characters. Phylogenetic relationships support a link between Cerrado and south-eastern species and a difference in the composition of species from north-eastern and south-eastern Atlantic forest. Refugia and stable areas identified within unstable areas suggest that these areas were important to maintain diversity in the Atlantic forest biodiversity hotspot. This study provides a robust phylogenetic framework to address important historical questions for Eugenia s.l. within an evolutionary context, supporting the need for better taxonomic study of one of the largest genera in the Neotropics. Furthermore, valuable insight is offered into diversification and biome shifts of plant species in the highly environmentally impacted Atlantic forest of South America. Evidence is presented that climate stability in the south-eastern Atlantic forest during the Quaternary contributed to the

Aspergillus asper sp. nov. and Aspergillus collinsii sp. nov., from Aspergillus section Usti.

Science.gov (United States)

Jurjevic, Zeljko; Peterson, Stephen W

2016-07-01

In sampling fungi from the built environment, two isolates that could not confidently be placed in described species were encountered. Phenotypic analysis suggested that they belonged in Aspergillus sect. Usti. In order to verify the sectional placement and to assure that they were undescribed rather than phenotypically aberrant isolates, DNA was isolated and sequenced at the beta-tubulin, calmodulin, internal transcribed spacer and RNA polymerase II loci and sequences compared with those from other species in the genus Aspergillus. At each locus, each new isolate was distant from existing species. Phylogenetic trees calculated from these data and GenBank data for species of the section Usti excluded the placement of these isolates in existing species, with statistical support. Because they were excluded from existing taxa, the distinct species Aspergillus asper (type strain NRRL 35910 T ) and Aspergillus collinsii (type strain NRRL 66196 T ) in sect. Usti are proposed to accommodate these strains.

Article 74 sect. 1 no. 24 (air pollution control) as a competent fundament for Renewable Energy Resources Act and thermal energy law; Art. 74 Abs. Nr. 24 GG (Luftreinhaltung) als Kompetenzgrundlage fuer EEG und EEWaermeG

Energy Technology Data Exchange (ETDEWEB)

Soesemann, F. [Kammergericht, Berlin (Germany); Humboldt-Univ. Berlin (Germany); Ecologic gGmbH, Berlin (Germany)

2008-08-15

Since the reform of federalism, no examination of requirement is necessary in accordance with article 72 sect. 2 Basic Law in order to support federal laws on article 74 sect. 1 no. 24 Basic Law. It is in the interest of the federal law giver to legislate the climate protection such as Renewable Energy Resources Act and thermal energy law alone on the basis of the authority standard in order to avoid the examination of requirement. In the sense of the article 74 sect. 1 no. 24 Basic Law, the climate protection is considered as air pollution control and serves to the reduction of greenhouse gases.

75 FR 5333 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2010-02-02

...) Place: Embassy Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone (703) 684-5900... matters related to the conduct of Study Section business and for the study section to consider safety and...

Geographical isolation caused the diversification of the Mediterranean thorny cushion-like Astragalus L. sect. Tragacantha DC. (Fabaceae).

Science.gov (United States)

Hardion, Laurent; Dumas, Pierre-Jean; Abdel-Samad, Farah; Bou Dagher Kharrat, Magda; Surina, Bostjan; Affre, Laurence; Médail, Frédéric; Bacchetta, Gianluigi; Baumel, Alex

2016-04-01

Understanding the origin and evolution of Mediterranean vascular flora within the long-term context of climate change requires a continuous study of historical biogeography supported by molecular phylogenetic approaches. Here we provide new insights into the fascinating but often overlooked diversification of Mediterranean xerophytic plants. Growing in some of the most stressing Mediterranean environments, i.e. coastal and mountainous opened habitats, the circum-Mediterranean Astragalus L. sect. Tragacantha DC. (Fabaceae) gathers several thorny cushion-like taxa. These have been the subjects of recent taxonomical studies, but they have not yet been investigated within a comprehensive molecular framework. Bayesian phylogenetics applied to rDNA ITS sequences reveal that the diversification of A. sect. Tragacantha has roots dating back to the Pliocene, and the same data also indicate an eastern-western split giving rise to the five main lineages that exist today. In addition, AFLP fingerprinting supports an old east-west pattern of vicariance that completely rules out the possibility of a recent eastern origin for western taxa. The observed network of genetic relationships implies that contrary to what is widely claimed in the taxonomic literature, it is range fragmentation, as opposed to a coastal-to-mountain ecological shift, that is likely the main driver of diversification. Copyright © 2016 Elsevier Inc. All rights reserved.

77 FR 75633 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-12-21

... (Closed). 8:00 a.m.-5:00 p.m., February 22, 2013 (Closed). Place: Embassy Suites, 1900 Diagonal Road... conduct of Study Section business and for the study section to consider safety and occupational health...

78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

77 FR 43090 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2012-07-23

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

75 FR 42455 - Safety and Occupational Health Study Section: Notice of Charter Renewal

Science.gov (United States)

2010-07-21

... Committee Act (Pub. L. 92-463) of October 6, 1972, that the Safety and Occupational Health Study Section... Secretary, Safety and Occupational Health Study Section, Department of Health and Human Services, 1600... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and...

Morfologia dos tricomas em Tibouchina sect. Pleroma (D. Don cogn. (melastomataceae

Directory of Open Access Journals (Sweden)

Paulo José Fernandes Guimarães

1999-01-01

Full Text Available Melastomataceae é a família que apresenta a maior diversidade de tricomas. Dr. Wurdack em seu "Atlas of hairs" reconheceu 46 tipos de tricomas para as Melastomataceae neotropicais com o uso de MEV, e referiu 17 destes para o gênero Tibouchina. Em Melastomataceae a morfologia dos tricomas tem sido extensivamente usada na delimitação dos táxons, assim como em estudos que antecederam ao trabalho de Cogniaux, a monografia das Melastomataceae brasileiras publicada em 1885. Em Tibouchina sect. Pleroma a morfologia dos tricomas foi substancial para a circunscrição de várias espécies. O uso da MEV permitiu uma caracterização dos 15 tipos diferentes de tricomas observados nas 41 espécies examinadas. Os diferentes tipos são descritos com base no aspecto morfológico tanto em MO como em MEV e ilustrados através de eletromicrografias de varredura e fotomicrografias.The Melastomataceae display greater trichome diversity. Dr. Wurdack, in his Atlas of hairs, recognized 46 types of trichomes for the Neotropical Melastomataceae through the Scanning Electron Microscope (SEM, and referred 17 of them to the genus Tibouchina. The trichome morphology has been extensively used in the delimitation of the taxa in Melastomataceae, as well as in previous studies by Cogniaux, the monograph of Brazilian Melastomataceae published in 1885. The morphology of the trichomes was essential for the delimitation of several species in Tibouchina section Pleroma. The use of SEM provided the best characterization of the 15 different types of trichomes recognized among the 41 species examined. These were described based on the morphological appearance, both optical microscopy and scanning electron microscopy, and illustrated by scanning electron micrographs and photomicrographs.

78 FR 24751 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-04-26

... 14, 2013 (Closed) Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... business and for the study section to consider safety and occupational health-related grant applications...

Rules and procedures for the design and operation of hazardous research equipment

International Nuclear Information System (INIS)

1978-12-01

The manual has been prepared for use by research personnel involved in experiments at the Lawrence Berkeley Laboratory. It contains rules and procedures for the design, test, installation, and operation of hazardous research equipment. Sect. I contains such information as responsibility of experimenters for safety, descriptions of the various Laboratory safety organizations, and enumeration of various services available to experimenters at the Laboratory. Sect. II describes specific rules for the setup and operation of experimental equipment at the Laboratory. Sect. III gives detailed design criteria and procedures for equipment frequently encountered in the high energy physics laboratory

Criticality safety assessment of FBTR fuel sub-assemblies using WIMS cross section set

International Nuclear Information System (INIS)

Gupta, H.C.; Chakraborty, B.

2002-01-01

Full text: FBTR's irradiated fuel sub-assemblies (FSAs) are sent to RML at Indira Gandhi Centre for Atomic Research for post irradiation examination. The FSAs are cut open and the fuel pins are separated for examination in the hot cells. It was required to evaluate the criticality safety in handling the FSAs in the hot cells. Criticality safety studies for handling two as well as three irradiated FSAs in the hot cells under dry conditions were carried out by the Safety Group at IGCAR, Kalpakkam. Monte Carlo code KENO (Version Va) which uses 16-group Hansen-Roach cross-section set was used for the calculations. Subsequently, during the safety review of the proposition by the Safety Review Committee (SARCOP) of AERB, it was stipulated to carry out the criticality safety studies under flooded condition also. We carried out the criticality safety studies for these fuel sub assemblies in different configurations under dry (buried in concrete) as well as wet condition (flooded with light water) using Monte Carlo codes MONALI (developed at BARC) and KENO4 using WlMS-69 group cross section set. Results of our analyses under various conditions are presented in this paper

Section 60 revisited (The Ontario Electrical Safety Code)

Energy Technology Data Exchange (ETDEWEB)

Olechna, T.

2003-06-01

Recent changes to the Ontario Electrical Safety Code (OESC), specifically the deletion of Section 60, Electrical Communication Systems, are discussed in an effort to explain the history behind the decision and the time frame of the changes. Communication systems include telephone, telegraph, data communications, intercommunications, wired music and paging systems. In brief, the deletion of Section 60 occurred in 1983, and resulted from the fact that communication-type wiring was historically the property of the communications utility and under federal jurisdiction. Since such equipment was under federal jurisdiction, they were not inspected in Ontario, hence the deletion of Section 60 from the Ontario Code. It should be noted that although Section 60 is deleted, a number of rules applicable to communications circuits are spread throughout various sections of the Code, notably in Rule 1-032 dealing with damage and interference, Rule 4-022 involving harmonics issues, Rule 12-904(2) regulates the use of conductors that are of different sources of voltage, and Rule 10-708 which specifies the spacing and bonding requirements for communications systems. The end result is that even though Section 60 was deleted, there are these and other rules in the OESC that have direct impact on communications circuits and in effect help to protect the integrity of the system.

Molecular systematics of Dendrobium (Orchidaceae, Dendrobieae) from mainland Asia based on plastid and nuclear sequences.

Science.gov (United States)

Xiang, Xiao-Guo; Schuiteman, André; Li, De-Zhu; Huang, Wei-Chang; Chung, Shih-Wen; Li, Jian-Wu; Zhou, Hai-Lang; Jin, Wei-Tao; Lai, Yang-Jun; Li, Zhen-Yu; Jin, Xiao-Hua

2013-12-01

Dendrobium is one of the three largest genera and presents some of the most intricate taxonomic problems in the family Orchidaceae. Based on five DNA markers and a broad sampling of Dendrobium and its relatives from mainland Asia (109 species), our results indicate that mainland Asia Dendrobium is divided into eight clades (with two unplaced species) that form polytomies along the spine of the cladogram. Both Dendrobium and Epigeneium are well supported as monophyletic, whereas sect. Dendrobium, sect. Densiflora, sect. Breviflores, sect. Holochrysa, are paraphyletic/polyphyletic. Many ignored phylogenetic relationships, such as the one of major clades formed by D. jenkinsii and D. lindleyi (two members of sect. Densiflora), the Aphyllum group, the Devonianum group, the Catenatum group, the Crepidatum group, and the Dendrobium moniliforme complex are well supported by both molecular and morphological evidence. Based on our data, we propose to broaden sect. Dendrobium to include sect. Stuposa, sect. Breviflores, and sect. Holochrysa and to establish a new section to accommodate D. jenkinsii and D. lindleyi. Our results indicated that it is preferable to use a broad generic concept of Dendrobium and to pursue an improved infrageneric classification at sectional level, taking into account both morphology and current molecular findings. Copyright © 2013 Elsevier Inc. All rights reserved.

Contrasting evolutionary processes during Quaternary climatic changes and historical orogenies: a case study of the Japanese endemic primroses Primula sect. Reinii.

Science.gov (United States)

Yamamoto, Masaya; Ohtani, Masato; Kurata, Kaoruko; Setoguchi, Hiroaki

2017-11-28

Recent biogeographic studies have illustrated that Quaternary climatic changes and historical orogenies have driven the development of high levels of biodiversity. In this context, phylogenetic niche conservatism may play a role as a major precursor of allopatric speciation. However, the effects of niche evolution on the diversification patterns of plant species under rapid habitat changes are still unknown. Here, Primula section Reinii, one of the few primroses endemic to the Japanese Archipelago, was investigated. This study aimed to clarify the phylogenetic position and relationships of section Reinii, interpret the biogeographic and diversification patterns of this group and gain a better understanding of the role of climatic niche evolution in the Japanese endemic primroses. Dated phylogeny for Primula section Reinii is presented based on the sequences of six chloroplast genes and one nuclear gene. Biogeographic history was reconstructed using statistical dispersal-vicariance analysis. Macro-evolutionary modelling of the climatic niche was combined with biogeographic inferences. Section Reinii was shown to be monophyletic based on chloroplast and nuclear sequences. Fossil-calibrated dating analysis estimated that this section diverged from its sister taxon, sect. Cortusoides, around 1.82 million years ago, and intraspecific diversification occurred within the last million years. This time frame was characterized by Quaternary climatic oscillations and uplift of high mountains in Japan. Biogeographic inference suggested that this section originated at the northern end of the Japanese Archipelago and then dispersed southward to other islands. Models of climatic niche evolution indicated that the closely related species P. reinii and P. tosanensis have contrasting niche optima and rates of niche evolution. Our results highlight that spatiotemporal heterogeneity in the Japanese islands may play a significant role in the biogeographic history of Japanese endemic

Phylogenetic fragrance patterns in Nicotiana sections Alatae and Suaveolentes.

Science.gov (United States)

Raguso, Robert A; Schlumpberger, Boris O; Kaczorowski, Rainee L; Holtsford, Timothy P

2006-09-01

We analyzed floral volatiles from eight tobacco species (Nicotiana; Solanaceae) including newly discovered Brazilian taxa (Nicotiana mutabilis and "Rastroensis") in section Alatae. Eighty-four compounds were found, including mono- and sesquiterpenoids, nitrogenous compounds, benzenoid and aliphatic alcohols, aldehydes and esters. Floral scent from recent accessions of Nicotiana alata, Nicotiana bonariensis and Nicotiana langsdorffii differed from previously published data, suggesting intraspecific variation in scent composition at the level of biosynthetic class. Newly discovered taxa in Alatae, like their relatives, emit large amounts of 1,8-cineole and smaller amounts of monoterpenes on a nocturnal rhythm, constituting a chemical synapomorphy for this lineage. Fragrance data from three species of Nicotiana sect. Suaveolentes, the sister group of Alatae, (two Australian species: N. cavicola, N. ingulba; one African species: N. africana), were compared to previously reported data from their close relative, N. suaveolens. Like N. suaveolens, N. cavicola and N. ingulba emit fragrances dominated by benzenoids and phenylpropanoids, whereas the flowers of N. africana lacked a distinct floral scent and instead emitted only small amounts of an aliphatic methyl ester from foliage. Interestingly, this ester also is emitted from foliage of N. longiflora and N. plumbaginifolia (both in section Alatae s.l.), which share a common ancestor with N. africana. This result, combined with the synapomorphic pattern of 1,8 cineole emission in Alatae s.s., suggests that phylogenetic signal explains a major component of fragrance composition among tobacco species in sections Alatae and Suaveolentes. At the intraspecific level, interpopulational scent variation is widespread in sect. Alatae, and may reflect edaphic specialization, introgression, local pollinator shifts, genetic drift or artificial selection in cultivation. Further studies with genetically and geographically well

Taxonomic changes in Oenothera sections Gaura and Calylophus (Onagraceae).

Science.gov (United States)

Wagner, Warren L; Krakos, Kyra N; Hoch, Peter C

2013-01-01

The long-recognized genus Gaura was shown recently to be deeply nested within one of two major clades of Oenothera. New molecular data indicate further taxonomic changes are necessary in Oenothera sect. Gaura. We make these changes here, including three new combinations, in advance of the Onagraceae treatment for the Flora of North America. The new phylogenetic studies show that several pairs of taxa treated as subspecies in the most recent revision by Raven and Gregory (1972) had independent origins within sect. Gaura, and are here elevated to species level (Oenothera nealleyi for Gaura suffulta subsp. nealleyi; Oenothera dodgeniana for Gaura neomexicana subsp. neomexicana; and Oenothera podocarpa for Gaura hexandra subsp. gracilis). Also, a nomenclatural problem in Oenothera sect. Calylophus is corrected by adopting the name Oenothera capillifolia Scheele for the species known previously, and nomenclaturally correct, as Calylophus berlandieri Spach. This problem necessitates a new combination Oenothera capillifolia subsp. berlandieri.

Tool for assistance in testing the safety logic section of nuclear plants

International Nuclear Information System (INIS)

Boulc'h, J.; Meur, M. le; Collart, J.M.; Segalard, J.; Uberschlag, J.

1986-01-01

The analysis of the protection system logic section (SPIN) of the PALUEL plant performed manually have led to the study of a logical tool for testing the safety logic section having or having not failures. It is a dynamic analyser which from a terminal in a sharing time system will be able to generate testing sequences, to simulate a processor and its environment and to analyse the logic sections with their workable code

Stochastic theories of quantum mechanics

International Nuclear Information System (INIS)

De la Pena, L.; Cetto, A.M.

1991-01-01

The material of this article is organized into five sections. In Sect. I the basic characteristics of quantum systems are briefly discussed, with emphasis on their stochastic properties. In Sect. II a version of stochastic quantum mechanics is presented, to conclude that the quantum formalism admits an interpretation in terms of stochastic processes. In Sect. III the elements of stochastic electrodynamics are described, and its possibilities and limitations as a fundamental theory of quantum systems are discussed. Section IV contains a recent reformulation that overcomes the limitations of the theory discussed in the foregoing section. Finally, in Sect. V the theorems of EPR, Von Neumann and Bell are discussed briefly. The material is pedagogically presented and includes an ample list of references, but the details of the derivations are generally omitted. (Author)

Taxonomic changes in Oenothera sections Gaura and Calylophus (Onagraceae

Directory of Open Access Journals (Sweden)

Warren Wagner

2013-11-01

Full Text Available The long-recognized genus Gaura was shown recently to be deeply nested within one of two major clades of Oenothera. New molecular data indicate further taxonomic changes are necessary in Oenothera sect. Gaura. We make these changes here, including three new combinations, in advance of the Onagraceae treatment for the Flora of North America. The new phylogenetic studies show that several pairs of taxa treated as subspecies in the most recent revision by Raven and Gregory (1972 had independent origins within sect. Gaura, and are here elevated to species level (Oenothera nealleyi for Gaura suffulta subsp. nealleyi; Oenothera dodgeniana for Gaura neomexicana subsp. neomexicana; and Oenothera podocarpa for Gaura hexandra subsp. gracilis. Also, a nomenclatural problem in Oenothera sect. Calylophus is corrected by adopting the name Oenothera capillifolia Scheele for the species known previously, and nomenclaturally correct, as Calylophus berlandieri Spach. This problem necessitates a new combination Oenothera capillifolia subsp. berlandieri.

Approaching equilibrium in heavy-ion collisions

International Nuclear Information System (INIS)

Wolschin, G.

1981-01-01

The aim of this paper is to obtain a consistent and precise understanding of the available data and the development of a model with few parameters and considerable predictive power. In the following section the nonequilibrium statistical treatment of the relative motion is outlined. The time scales which determine the validity of the approach are mentioned, and the moment equations are discussed. A classical model to evaluate the mean energy and angular-momentum loss as well as the interaction time is described in sect. 3. The nucleon exchange occurring during nuclear contact can also be treated as a transport process. In sect. 4 we discuss calculated element distributions and compare with experimental results. An observed retardation of the charge drift requires special attention. In sect. 5 we treat the shape relaxation as a dissipative process and present a model calculation. The angular-momentum transport is reconsidered in sect. 6, with emphasis on the statistical fluctuations of the dissipated angular momentum. Calculated multidifferential cross-sections are compared with experiment in sect. 7. Finally we discuss in sect. 8 how nuclear shell structure can possibly affect the nucleon diffusion process, and draw the conclusions in sect. 9. (orig./HSI)

16 CFR 1500.88 - Exemptions from lead limits under section 101 of the Consumer Product Safety Improvement Act for...

Science.gov (United States)

2010-01-01

... 101 of the Consumer Product Safety Improvement Act for certain electronic devices. 1500.88 Section... from lead limits under section 101 of the Consumer Product Safety Improvement Act for certain electronic devices. (a) The Consumer Product Safety Improvement Act (CPSIA) provides for specific lead limits...

Sorting through the chaff, nDNA gene trees for phylogenetic inference and hybrid identification of annual sunflowers (Helianthus sect. Helianthus).

Science.gov (United States)

Moody, Michael L; Rieseberg, Loren H

2012-07-01

The annual sunflowers (Helianthus sect. Helianthus) present a formidable challenge for phylogenetic inference because of ancient hybrid speciation, recent introgression, and suspected issues with deep coalescence. Here we analyze sequence data from 11 nuclear DNA (nDNA) genes for multiple genotypes of species within the section to (1) reconstruct the phylogeny of this group, (2) explore the utility of nDNA gene trees for detecting hybrid speciation and introgression; and (3) test an empirical method of hybrid identification based on the phylogenetic congruence of nDNA gene trees from tightly linked genes. We uncovered considerable topological heterogeneity among gene trees with or without three previously identified hybrid species included in the analyses, as well as a general lack of reciprocal monophyly of species. Nonetheless, partitioned Bayesian analyses provided strong support for the reciprocal monophyly of all species except H. annuus (0.89 PP), the most widespread and abundant annual sunflower. Previous hypotheses of relationships among taxa were generally strongly supported (1.0 PP), except among taxa typically associated with H. annuus, apparently due to the paraphyly of the latter in all gene trees. While the individual nDNA gene trees provided a useful means for detecting recent hybridization, identification of ancient hybridization was problematic for all ancient hybrid species, even when linkage was considered. We discuss biological factors that affect the efficacy of phylogenetic methods for hybrid identification.

Patient safety culture in out-of-hours primary care services in the Netherlands: a cross-sectional survey.

NARCIS (Netherlands)

Smits, M.; Keizer, E.; Giesen, P.; Deilkas, E.C.T.; Hofoss, D.; Bondevik, G.T

2018-01-01

Objective: To examine patient safety culture in Dutch out-of-hours primary care using the safety attitudes questionnaire (SAQ) which includes five factors: teamwork climate, safety climate, job satisfaction, perceptions of management and communication openness. Design: Cross-sectional observational

Phylogeny and intraspecific variability of holoparasitic Orobanche (Orobanchaceae) inferred from plastid rbcL sequences.

Science.gov (United States)

Manen, Jean-François; Habashi, Christine; Jeanmonod, Daniel; Park, Jeong-Mi; Schneeweiss, Gerald M

2004-11-01

The rbcL sequences of 106 specimens representing 28 species of the four recognized sections of Orobanche were analyzed and compared. Most sequences represent pseudogenes with premature stop codons. This study confirms that the American lineage (sects. Gymnocaulis and Myzorrhiza) contains potentially functional rbcL-copies with intact open reading frames and low rates of non-synonymous substitutions. For the first time, this is also shown for a member of the Eurasian lineage, O. coerulescens of sect. Orobanche, while all other investigated species of sects. Orobanche and Trionychon contain pseudogenes with distorted reading frames and significantly higher rates of non-synonymous substitutions. Phylogenetic analyses of the rbcL sequences give equivocal results concerning the monophyly of Orobanche, and the American lineage might be more closely related to Boschniakia and Cistanche than to the other sections of Orobanche. Additionally, species of sect. Trionychon phylogenetically nest in sect. Orobanche. This is in concordance with results from other plastid markers (rps2 and matK), but in disagreement with other molecular (nuclear ITS), morphological, and karyological data. This might indicate that the ancestor of sect. Trionychon has captured the plastid genome, or parts of it, of a member of sect. Orobanche. Apart from the phylogenetically problematic position of sect. Trionychon, the phylogenetic relationships within sect. Orobanche are similar to those inferred from nuclear ITS data and are close to the traditional groupings traditionally recognized based on morphology. The intraspecific variation of rbcL is low and is neither correlated with intraspecific morphological variability nor with host range. Ancestral character reconstruction using parsimony suggests that the ancestor of O. sect. Orobanche had a narrow host range.

Graphs of neutron cross sections in JSD1000 for radiation shielding safety analysis

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

Graphs of neutron cross sections and self-shielding factors in the JSD1000 library are presented for radiation shielding safety analysis. The compilation contains various reaction cross sections for 42 nuclides from 1 H to 241 Am in the energy range from 3.51 x 10 -4 eV to 16.5 MeV. The Bondarenko-type self-shielding factors of each reaction are given by the background cross sections from σ 0 = 0 to σ 0 = 10000. (author)

Electron thermal diffusivity in ISX-B from observations of sawtooth oscillations

International Nuclear Information System (INIS)

Bell, J.D.

1984-03-01

Section I contains background material on tokamaks and the interest in Chi/sub e/. In Sect. II, a description if given of sawtooth phenomena, and the basic technique for this measurement of Chi/sub e/ is explained in a review of previous work on this topic. The analysis scheme used in the current effort is more advanced than earlier ones and is described in detail in Sect. III; Sect. IV presents our results and comparisons with values for Chi/sub e/ from the Oak Ridge power balance analysis. Various sensitivities of the procedure used here are discussed in Sect. V, and Sect. VI lists conclusions and possible extensions of this work

Patients for patient safety in China: a cross sectional study.

Science.gov (United States)

Zhang, Qiongwen; Li, Yulin; Li, Jing; Mao, Xuanyue; Zhang, Lijuan; Ying, Qinghua; Wei, Xin; Shang, Lili; Zhang, Mingming

2012-02-01

To investigate the baseline status of patients' awareness, knowledge, and attitudes to patient safety in China, and to determine the factors that influence patients' involvement in patient safety. We conducted a cross sectional survey using questionnaires adapted from recent studies on patient safety from outside China. The items included medical errors, infection, medication safety, and other aspects of patient safety. The questionnaire included 17 items and 5 domains. The survey was conducted between Jan. 2009 and Dec. 2010 involving 1000 patients from ten grade-A hospitals in seven provinces or cities in China. Most patients from the surgery departments completed the questionnaires voluntarily and anonymously. Five reviewers independently input the data into Microsoft Excel 2003, and the data were double-checked. Data were analyzed using SPSS 15.0 software for differences in the perceptions and attitudes of patients toward patient safety among different genders, ages, and regions. We distributed 1000 questionnaires and collected 959 completed questionnaires (response rate: 96%). Among the respondents, 58% of patients did not know what medical error is. Sixty-five percent of patients wanted disclosure of all medical errors. After errors occurred, 58% of patients wanted explanations of all possible harms that had resulted. Among 187 patients who had experienced medical errors, 83% of patients had sought appropriate legal action. About 52% of patients understood hospital infection, but 28% patients did not know that infections could occur in hospital. Seventy-eight percent of patients thought that medical staff should wash their hands before examining patients. More than half of the patients (68%) were willing to remind the staff of hygiene if they saw unsanitary conditions in a health clinic. Only 14% of patients knew the side effects of medications that they took. The majority of patients surveyed expressed willingness to contribute to patient safety, but their

Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

Science.gov (United States)

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Environmental, safety, and health plan for the remedial investigation of Waste Area Grouping 10, Operable Unit 3, at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1993-10-01

This document outlines the environmental, safety, and health (ES ampersand H) approach to be followed for the remedial investigation of Waste Area Grouping (WAG) 10 at Oak at Ridge National Laboratory. This ES ampersand H Plan addresses hazards associated with upcoming Operable Unit 3 field work activities and provides the program elements required to maintain minimal personnel exposures and to reduce the potential for environmental impacts during field operations. The hazards evaluation for WAG 10 is presented in Sect. 3. This section includes the potential radiological, chemical, and physical hazards that may be encountered. Previous sampling results suggest that the primary contaminants of concern will be radiological (cobalt-60, europium-154, americium-241, strontium-90, plutonium-238, plutonium-239, cesium-134, cesium-137, and curium-244). External and internal exposures to radioactive materials will be minimized through engineering controls (e.g., ventilation, containment, isolation) and administrative controls (e.g., procedures, training, postings, protective clothing)

Characterization of Microsatellite Loci in Lichen-Forming Fungi of Bryoria Section Implexae (Parmeliaceae

Directory of Open Access Journals (Sweden)

Olga Nadyeina

2014-07-01

Full Text Available Premise of the study: The locally rare, haploid, lichen-forming fungi Bryoria capillaris, B. fuscescens, and B. implexa are associated with boreal forests and belong to Bryoria sect. Implexae. Recent phylogenetic studies consider them to be conspecific. Microsatellite loci were developed to study population structure in Bryoria sect. Implexae and its response to ecosystem disturbances. Methods and Results: We developed 18 polymorphic microsatellite markers using 454 pyrosequencing data assessed in 82 individuals. The number of alleles per locus ranged from two to 13 with an average of 4.6. Nei's unbiased gene diversity, averaged over loci, ranged from 0.38 to 0.52. The markers amplified with all three species, except for markers Bi05, Bi15, and Bi18. Conclusions: The new markers will allow the study of population subdivision, levels of gene introgression, and levels of clonal spread of Bryoria sect. Implexae. They will also facilitate an understanding of the effects of forest disturbance on genetic diversity of these lichen species.

Phylogeny of xerophilic aspergilli (subgenus Aspergillus ) and taxonomic revision of section Restricti

DEFF Research Database (Denmark)

Sklenář, F.; Jurjević, Ž.; Zalar, P.

2017-01-01

-tubulin (benA), calmodulin (CaM) and RNA polymerase II second largest subunit (RPB2) loci. More than 300 strains belonging to sect. Restricti from various isolation sources and four continents were characterized by DNA sequencing, and 193 isolates were selected for phylogenetic analyses and phenotypic studies......Cl concentration from 0 to 25 %) and analysis of morphology including scanning electron microscopy. The micromorphology of conidial heads, vesicle dimensions, temperature profiles and growth parameters in osmotic gradient were useful criteria for species identification. The vast majority of species in sect...

Variation and geographical distribution of ploidy levels in Pennisetum section Brevivalvula (Poaceae) in Burkina Faso, Benin and southern Niger

OpenAIRE

Renno, Jean-François; Schmelzer, G.; De Jong, J.H.

1995-01-01

#Pennisetum$ sect. #Brevivalvula$ is a species complex characterized by polyploidy and apoximis. Ploidy level was assessed by DAPI-flow cytometry for 304 plants of the section, originating from Burkina Faso, Benin and southern Niger. The results were confirmed for 54 plants based on chromosome counts. The samples show four euploidy levels (with x = 9) distributed among five species : #P. hordeoides$ (2n = 36, 54), #P. pedicellatum$ (2n = 36, 45, 54), #P. polystachion$ (2n = 18, 36, 45, 54), #...

Public perception of drinking water safety in South Africa 2002-2009: a repeated cross-sectional study.

Science.gov (United States)

Wright, Jim A; Yang, Hong; Rivett, Ulrike; Gundry, Stephen W

2012-07-27

In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. This repeated cross-sectional study draws on General Household Surveys from 2002-2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002-2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000-02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.

Research section on optimization of nuclear safety regulation. Summary of research section

International Nuclear Information System (INIS)

Madarame, Haruki

2009-01-01

In order to make the inspection of nuclear facilities more effective, mutual understanding and respect between the regulatory body and the licensees, and a frank, open and yet formal relationship, shall be fostered. Thus the Research Section on Optimization of Nuclear Safety Regulation was established at JSME in 2005, where academic, regulatory and industrial members have frankly discussed for the improvement of inspection system. Agreed on the necessity of system renovation, the optimal inspection system was discussed. Suitable plant shutdown interval for the preventive maintenance was evaluated considering the current monitoring technique. At the same time, the U.S. and European inspection systems were reviewed to learn a lesson. The useful conclusion were published so that each member makes efforts for the effective inspection system. Some of the results have already been referred by the governmental task force on the inspection system improvement, and contributed to the system renovation. (author)

Patients' evaluations of patient safety in English general practices: a cross-sectional study.

Science.gov (United States)

Ricci-Cabello, Ignacio; Marsden, Kate S; Avery, Anthony J; Bell, Brian G; Kadam, Umesh T; Reeves, David; Slight, Sarah P; Perryman, Katherine; Barnett, Jane; Litchfield, Ian; Thomas, Sally; Campbell, Stephen M; Doos, Lucy; Esmail, Aneez; Valderas, Jose M

2017-07-01

Description of safety problems and harm in general practices has previously relied on information from health professionals, with scarce attention paid to experiences of patients. To examine patient-reported experiences and outcomes of patient safety in primary care. Cross-sectional study in 45 general practices across five regions in the north, centre, and south of England. A version of the Patient Reported Experiences and Outcomes of Safety in Primary Care (PREOS-PC) questionnaire was sent to a random sample of 6736 patients. Main outcome measures included 'practice activation' (what a practice does to create a safe environment); 'patient activation' (how proactive are patients in ensuring safe healthcare delivery); 'experiences of safety events' (safety errors); 'outcomes of safety' (harm); and 'overall perception of safety' (how safe patients rate their practice). Questionnaires were returned by 1244 patients (18.4%). Scores were high for 'practice activation' (mean [standard error] = 80.4 out of 100 [2.0]) and low for 'patient activation' (26.3 out of 100 [2.6]). Of the patients, 45% reported experiencing at least one safety problem in the previous 12 months, mostly related to appointments (33%), diagnosis (17%), patient provider communication (15%), and coordination between providers (14%). Twenty-three per cent of the responders reported some degree of harm in the previous 12 months. The overall assessment of level of safety of practices was generally high (86.0 out of 100 [16.8]). Priority areas for patient safety improvement in general practices in England include appointments, diagnosis, communication, coordination, and patient activation. © British Journal of General Practice 2017.

SCALE system cross-section validation for criticality safety analysis

International Nuclear Information System (INIS)

Hathout, A.M.; Westfall, R.M.; Dodds, H.L. Jr.

1980-01-01

The purpose of this study is to test selected data from three cross-section libraries for use in the criticality safety analysis of UO 2 fuel rod lattices. The libraries, which are distributed with the SCALE system, are used to analyze potential criticality problems which could arise in the industrial fuel cycle for PWR and BWR reactors. Fuel lattice criticality problems could occur in pool storage, dry storage with accidental moderation, shearing and dissolution of irradiated elements, and in fuel transport and storage due to inadequate packing and shipping cask design. The data were tested by using the SCALE system to analyze 25 recently performed critical experiments

Microsatellites for Oenothera gayleana and O. hartwegii subsp. filifolia (Onagraceae), and their utility in section Calylophus.

Science.gov (United States)

Lewis, Emily M; Fant, Jeremie B; Moore, Michael J; Hastings, Amy P; Larson, Erica L; Agrawal, Anurag A; Skogen, Krissa A

2016-02-01

Eleven nuclear and four plastid microsatellite markers were screened for two gypsum endemic species, Oenothera gayleana and O. hartwegii subsp. filifolia, and tested for cross-amplification in the remaining 11 taxa within Oenothera sect. Calylophus (Onagraceae). Microsatellite markers were tested in two to three populations spanning the ranges of both O. gayleana and O. hartwegii subsp. filifolia. The nuclear microsatellite loci consisted of both di- and trinucleotide repeats with one to 17 alleles per population. Several loci showed significant deviation from Hardy-Weinberg equilibrium, which may be evidence of chromosomal rings. The plastid microsatellite markers identified one to seven haplotypes per population. The transferability of these markers was confirmed in all 11 taxa within Oenothera sect. Calylophus. The microsatellite loci characterized here are the first developed and tested in Oenothera sect. Calylophus. These markers will be used to assess whether pollinator foraging distance influences population genetic parameters in predictable ways.

Occupational Safety and Health Concerns in Logging: A Cross-Sectional Assessment in Virginia

Directory of Open Access Journals (Sweden)

Sunwook Kim

2017-11-01

Full Text Available Increased logging mechanization has helped improve logging safety and health, yet related safety risks and concerns are not well understood. A cross-sectional study was completed among Virginia loggers. Participants (n = 122 completed a self-administered questionnaire focusing on aspects of safety and health related to logging equipment. Respondents were at a high risk of workplace injuries, with reported career and 12-month injury prevalences of 51% and 14%, respectively. Further, nearly all (98% respondents reported experiencing musculoskeletal symptoms. Over half (57.4% of respondents reported symptoms related to diesel exhaust exposure in their career. Few (15.6%, however, perceived their jobs to be dangerous. Based on the opinions and suggestions of respondents, three priority areas were identified for interventions: struck-by/against hazards, situational awareness (SA during logging operations, and visibility hazards. To address these hazards, and to have a broader and more substantial positive impact on safety and health, we discuss the need for proactive approaches such as incorporating proximity technologies in a logging machine or personal equipment, and enhancing logging machine design to enhance safety, ergonomics, and SA.

C4P cross-section libraries for safety analyses with SIMMER and related studies

International Nuclear Information System (INIS)

Rineiski, A.; Sinitsa, V.; Gabrielli, F.; Maschek, W.

2011-01-01

A code and data system, C 4 P, is under development at KIT. It includes fine-group master libraries and tools for generating problem-oriented cross-section libraries, primarily for safety studies with the SIMMER code and related analyses. In the paper, the 560-group master library and problem oriented 40-group and 72-group cross-section libraries, for thermal and fast systems, respectively, are described and their performances are investigated. (author)

[Sequence of the ITS region of nuclear ribosomal DNA(nrDNA) in Xinjiang wild Dianthus and its phylogenetic relationship].

Science.gov (United States)

Zhang, Lu; Cai, You-Ming; Zhuge, Qiang; Zou, Hui-Yu; Huang, Min-Ren

2002-06-01

Xinjiang is a center of distribution and differentiation of genus Dianthus in China, and has a great deal of species resources. The sequences of ITS region (including ITS-1, 5.8S rDNA and ITS-2) of nuclear ribosomal DNA from 8 species of genus Dianthus wildly distributed in Xinjiang were determined by direct sequencing of PCR products. The result showed that the size of the ITS of Dianthus is from 617 to 621 bp, and the length variation is only 4 bp. There are very high homogeneous (97.6%-99.8%) sequences between species, and about 80% homogeneous sequences between genus Dianthus and outgroup. The sequences of ITS in genus Dianthus are relatively conservative. In general, there are more conversion than transition in the variation sites among genus Dianthus. The conversion rates are relatively high, and the ratios of conversion/transition are 1.0-3.0. On the basis of phylogenetic analysis of nucleotide sequences the species of Dianthus in China would be divided into three sections. There is a distant relationship between sect. Barbulatum Williams and sect. Dianthus and between sect. Barbulatum Williams and sect. Fimbriatum Williams, and there is a close relationship between sect. Dianthus and sect. Fimbriatum Williams. From the phylogenetic tree of ITS it was found that the origin of sect. Dianthusis is earlier than that of sect. Fimbriatum Williams and sect. Barbulatum Williams.

Introduction to integrable many-body systems II

International Nuclear Information System (INIS)

Samaj, L.

2010-01-01

This is the second part of a three-volume introductory course about integrable systems of interacting bodies. The models of interest are quantum spin chains with nearest-neighbor interactions between spin operators, in particular Heisenberg spin- 2 models. The Ising model in a transverse field, expressible as a quadratic fermion form by using the Jordan-Wigner transformation, is the subject of Sect. 12. The derivation of the coordinate Bethe ansatz for the XXZ Heisenberg chain and the determination of its absolute ground state in various regions of the anisotropy parameter are presented in Sect. 13. The magnetic properties of the ground state are explained in Sect. 14. Sect. 15 concerns excited states and the zero-temperature thermodynamics of the XXZ model. The thermodynamics of the XXZ Heisenberg chain is derived on the basis of the string hypothesis in Sect. 16; the thermodynamic Bethe ansatz equations are analyzed in high-temperature and low-temperature limits. An alternative derivation of the thermodynamics without using strings, leading to a non-linear integral equation determining the free energy, is the subject of Sect. 17. A nontrivial application of the Quantum Inverse Scattering method to the fully anisotropic XYZ Heisenberg chain is described in Section 18. Section 19 deals with integrable cases of isotropic spin chains with an arbitrary spin. (Author)

The ITS1-5.8S rRNA gene -ITS2 sequence variability during the divergence of sweet-grass species (gen us Glyceria R. Br.

Directory of Open Access Journals (Sweden)

Alexander V Rodionov

2011-12-01

Full Text Available Comparative analysis of the sequence ITS1-5.8S rRNA gene-ITS2 of the nuclear genome of 13 species of genus Glyceria, 4 species of Melica and a species of monotypic genus Pleuropogon showed that the species of the genus Glyceria have 3 haplotypes: 1 Haplotype A was found only in species of the subgenus Glyceria section Glyceria (G. septentrionalis, G. fluitans, G. declinata, G. occidentalis, G. notata, G. borealis, G. leptostachya and in Pleuropogon sabinii; 2 Haplotype C is characteristic of the subgenus Hydropoa, section Hydropoa (G. grandis, G. х amurensis, G. triflora, G. maxima and sect. Lithuanicae (G. leptolepis; 3 Haplotype B is found in the species of the subgenus Hydropoa sections Striatae (G. elata, G. striata, G. neogaea, G. canadensis, Scolochloiformes (G. alnasteretum, G. spiculosa and G. lithuanica of sect. Lithuanicae. Species carring haplotype B are located at the base of the phylogenetic tree of the genus Glyceria and/or clustered with low bootstrap indices. On the phylogenetic trees inferred by the analysis of the sequences ITS and 5.8S rDNA both sect. Glyceria and sect. Hydropoa represented two sister monophyly branches. The species Pleuropogon sabinii belong to the branch of subgenus Glyceria as a sister monotypic branch to the branch of the sect. Glyceria.

Changes in patient safety culture after restructuring of intensive care units: Two cross-sectional studies.

Science.gov (United States)

Vifladt, Anne; Simonsen, Bjoerg O; Lydersen, Stian; Farup, Per G

2016-02-01

Compare changes in registered nurses' perception of the patient safety culture in restructured and not restructured intensive care units during a four-year period. Two cross-sectional surveys were performed, in 2008/2009 (time 1) and 2012/2013 (time 2). During a period of 0-3 years after time 1, three of six hospitals merged their general and medical intensive care units (restructured). The other hospitals maintained their structure of the intensive care units (not restructured). Intensive care units in hospitals at one Norwegian hospital trust. The safety culture was measured with Hospital Survey on Patient Safety Culture. At times 1 and 2, 217/302 (72%) and 145/289 (50%) registered nurses participated. Restructuring was negatively associated with change in the safety culture, in particular, the dimensions of the safety culture within the unit level. The dimensions most vulnerable for restructuring were manager expectations and actions promoting safety, teamwork within hospital units and staffing. In this study, the restructuring of intensive care units was associated with a negative impact on the safety culture. When restructuring, the management should be particularly aware of changes in the safety culture dimensions manager expectations and actions promoting safety, teamwork within hospital units and staffing. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Science.gov (United States)

2012-01-01

Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period. PMID:22834485

Public perception of drinking water safety in South Africa 2002–2009: a repeated cross-sectional study

Directory of Open Access Journals (Sweden)

Wright Jim A

2012-07-01

Full Text Available Abstract Background In low and middle income countries, public perceptions of drinking water safety are relevant to promotion of household water treatment and to household choices over drinking water sources. However, most studies of this topic have been cross-sectional and not considered temporal variation in drinking water safety perceptions. The objective of this study is to explore trends in perceived drinking water safety in South Africa and its association with disease outbreaks, water supply and household characteristics. Methods This repeated cross-sectional study draws on General Household Surveys from 2002–2009, a series of annual nationally representative surveys of South African households, which include a question about perceived drinking water safety. Trends in responses to this question were examined from 2002–2009 in relation to reported cholera cases. The relationship between perceived drinking water safety and organoleptic qualities of drinking water, supply characteristics, and socio-economic and demographic household characteristics was explored in 2002 and 2008 using hierarchical stepwise logistic regression. Results The results suggest that perceived drinking water safety has remained relatively stable over time in South Africa, once the expansion of improved supplies is controlled for. A large cholera outbreak in 2000–02 had no apparent effect on public perception of drinking water safety in 2002. Perceived drinking water safety is primarily related to water taste, odour, and clarity rather than socio-economic or demographic characteristics. Conclusion This suggests that household perceptions of drinking water safety in South Africa follow similar patterns to those observed in studies in developed countries. The stability over time in public perception of drinking water safety is particularly surprising, given the large cholera outbreak that took place at the start of this period.

Microsatellites for Oenothera gayleana and O. hartwegii subsp. filifolia (Onagraceae), and their utility in section Calylophus1

Science.gov (United States)

Lewis, Emily M.; Fant, Jeremie B.; Moore, Michael J.; Hastings, Amy P.; Larson, Erica L.; Agrawal, Anurag A.; Skogen, Krissa A.

2016-01-01

Premise of the study: Eleven nuclear and four plastid microsatellite markers were screened for two gypsum endemic species, Oenothera gayleana and O. hartwegii subsp. filifolia, and tested for cross-amplification in the remaining 11 taxa within Oenothera sect. Calylophus (Onagraceae). Methods and Results: Microsatellite markers were tested in two to three populations spanning the ranges of both O. gayleana and O. hartwegii subsp. filifolia. The nuclear microsatellite loci consisted of both di- and trinucleotide repeats with one to 17 alleles per population. Several loci showed significant deviation from Hardy–Weinberg equilibrium, which may be evidence of chromosomal rings. The plastid microsatellite markers identified one to seven haplotypes per population. The transferability of these markers was confirmed in all 11 taxa within Oenothera sect. Calylophus. Conclusions: The microsatellite loci characterized here are the first developed and tested in Oenothera sect. Calylophus. These markers will be used to assess whether pollinator foraging distance influences population genetic parameters in predictable ways. PMID:26949578

Clarifying the butter Boletes: a new genus, Butyriboletus, is established to accommodate Boletus sect. Appendiculati, and six new species are described.

Science.gov (United States)

Arora, David; Frank, Jonathan L

2014-01-01

The butter boletes (Boletus s.l. sect. Appendiculati) are an economically important group of ectomycorrhizal fungi whose basidiocarps have a yellow tube layer that often bruises blue, yellow reticulate stipe, mild flavor and firm yellow-tinged flesh that may or may not turn blue when exposed. Morphological characters and molecular data (ITS and LSU) place this group in a separate phylogenetic clade from Boletus sensu stricto. Here we establish a new genus, Butyriboletus, to accommodate 14 species of butter boletes that range from Asia to Europe, north Africa and North America. We recombine eight previously described butter bolete species and we describe six new species: four from western USA (Bu. persolidus, Bu. primiregius, Bu. autumnigius, Bu. querciregius) and two from Yunnan, China (Bu. yicibus, Bu. sanicibus). © 2014 by The Mycological Society of America.

Validation of KENO V.a: Comparison with critical experiments

International Nuclear Information System (INIS)

Jordan, W.C.; Landers, N.F.; Petrie, L.M.

1986-12-01

Section 1 of this report documents the validation of KENO V.a against 258 critical experiments. Experiments considered were primarily high or low enriched uranium systems. The results indicate that the KENO V.a Monte Carlo Criticality Program accurately calculates a broad range of critical experiments. A substantial number of the calculations showed a positive or negative bias in excess of 1 1/2% in k-effective (k/sub eff/). Classes of criticals which show a bias include 3% enriched green blocks, highly enriched uranyl fluoride slab arrays, and highly enriched uranyl nitrate arrays. If these biases are properly taken into account, the KENO V.a code can be used with confidence for the design and criticality safety analysis of uranium-containing systems. Sections 2 of this report documents the results of investigation into the cause of the bias observed in Sect. 1. The results of this study indicate that the bias seen in Sect. 1 is caused by code bias, cross-section bias, reporting bias, and modeling bias. There is evidence that many of the experiments used in this validation and in previous validations are not adequately documented. The uncertainty in the experimental parameters overshadows bias caused by the code and cross sections and prohibits code validation to better than about 1% in k/sub eff/. 48 refs., 19 figs., 19 tabs

Neonatal Safety of Elective Family-Centered Caesarean Sections: A Cohort Study

Directory of Open Access Journals (Sweden)

Ilona C. Narayen

2018-02-01

Full Text Available BackgroundAlthough little data are available concerning safety for newborns, family-centered caesarean sections (FCS are increasingly implemented. With FCS mothers can see the delivery of their baby, followed by direct skin-to-skin contact. We evaluated the safety for newborns born with FCS in the Leiden University Medical Center (LUMC, where FCS was implemented in June 2014 for singleton pregnancies with a gestational age (GA ≥38 weeks and without increased risks for respiratory morbidity.MethodsThe incidence of respiratory pathology, unplanned admission, and hypothermia in infants born after FCS in LUMC were retrospectively reviewed and compared with a historical cohort of standard elective cesarean sections (CS.ResultsFrom June 2014 to November 2015, 92 FCS were performed and compared to 71 standard CS in 2013. Incidence of respiratory morbidity, hypothermia, temperatures at arrival at the department, GA, and birth weight were comparable (ns. Unplanned admission occurred more often after FCS when compared to standard CS (21 vs 7%; p = 0.03, probably due to peripheral oxygen saturation (SpO2 monitoring. There was no increase in respiratory pathology (8 vs 6%, ns. One-third of the babies were separated from their mother during or after FCS.ConclusionUnplanned neonatal admissions after elective CS increased after implementing FCS, without an increase in respiratory morbidity or hypothermia. SpO2 monitoring might have a contribution. Separation from the mother occurred often.

combined with caesarean sectIon Low spinal anaesthesia local ...

African Journals Online (AJOL)

1983-01-01

Jan 1, 1983 ... The disadvantages of this technique are that no retractor can be used in the lower end of the ... big light' or 'the baby crying'. It was graded as .... in analysing these data and to Dr M. V. Gumede, Secretary for. * Following ...

Exploring the relationship between quality of management and safety climate in a large scale Danish cross‐sectional study

DEFF Research Database (Denmark)

Sønderstrup-Andersen, Hans H. K.; Carlsen, Kathrine; Kines, Pete

2011-01-01

. In addition, we consider the impact of age, gender, education, job type and seniority as well as company size and industrial sector on the rating of safety climate. Predictors of safety climate ratings are analysed by use of multiple regression analysis. Our results show that the leadership style measured...... and transformational leadership and safety climate, and to explore how safety climate is affected by a number of socio-demographic factors and within different industries and company sizes. The analyses are based on data from a recent Danish work environment cross-sectional study including 3681 employees from a wide...... range of industries and who report that safety climate is relevant for their job. We use two safety climate items, (one regarding management safety empowerment; one regarding co-workers’ safety priority), one question about transactional leadership and two scales concerning transformational leadership...

The role of probabilistic safety assessment and probabilistic safety criteria in nuclear power plant safety

International Nuclear Information System (INIS)

1992-01-01

The purpose of this Safety Report is to provide guidelines on the role of probabilistic safety assessment (PSA) and a range of associated reference points, collectively referred to as probabilistic safety criteria (PSC), in nuclear safety. The application of this Safety Report and the supporting Safety Practice publication should help to ensure that PSA methodology is used appropriately to assess and enhance the safety of nuclear power plants. The guidelines are intended for use by nuclear power plant designers, operators and regulators. While these guidelines have been prepared with nuclear power plants in mind, the principles involved have wide application to other nuclear and non-nuclear facilities. In Section 2 of this Safety Report guidelines are established on the role PSA can play as part of an overall safety assurance programme. Section 3 summarizes guidelines for the conduct of PSAs, and in Section 4 a PSC framework is recommended and guidance is provided for the establishment of PSC values

Mario Bunge's Scientific Realism

Science.gov (United States)

Cordero, Alberto

2012-01-01

This paper presents and comments on Mario Bunge's scientific realism. After a brief introduction in Sects. 1 and 2 outlines Bunge's conception of realism. Focusing on the case of quantum mechanics, Sect. 3 explores how his approach plays out for problematic theories. Section 4 comments on Bunge's project against the background of the current…

FATWA MUI TENTANG ALIRAN SESAT DI INDONESIA (1976-2010

Directory of Open Access Journals (Sweden)

Dimyati Sajari

2015-06-01

Full Text Available The Ruling of Indonesian Council of Ulama on Heretical Sects in Indonesia (1976-2010. The claims of truth and deception, even condemnation of unbeliever (takfir, still continue to happen to the present time. In Indonesia, the introduction of the Council of Ulama (MUI ruling or fatwa on misleading sect may proof the widespred claim. This paper attempts to trace the historical dynamics of acclaimed ambiguous sects by the MUI. However, the author argues that based on the study of the MUI fatwa section of Islamic faith and religious school of thoughts (1976-2010 it is revealed that such claim is purely a reflection of the MUI’s role as a safeguard and keeper of the faith of Islamic community. In addition, he further maintains that the thought of the misleading sects in Indonesia is deeply rooted in the history of Islamic thought and MUI fatwa of heretical sects in Indonesia is nothing more than a representation of a firm attitude of the majority throughout Islamic history against minorities of whom have been considered being misguided and go beyond the mainstreams, but nonetheless, it seems that such a sect will remain in the land of Indonesia.

Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

International Nuclear Information System (INIS)

Kim Ju Ree; Lee, Sang Hoon

2012-01-01

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.

Therapeutic results and safety of postoperative radiotherapy for keloid after repeated Cesarean section in immediate postpartum period

Energy Technology Data Exchange (ETDEWEB)

Kim Ju Ree; Lee, Sang Hoon [Cheil General Hospital and Women' s Healthcare Center, Kwandong University College of Medicine, Seoul (Korea, Republic of)

2012-06-15

To evaluate the effectiveness and safety of postoperative radiotherapy for the treatment of keloid scars administered immediately after Cesarean section. A total of 26 postpartum patients with confirmed keloids resulting from previous Cesarean sections received either 12 or 15 Gy radiotherapy. The radiotherapy was divided into three 6 MeV electron beam fractions administered during the postpartum period immediately following the fi nal Cesarean section. To evaluate ovarian safety, designated doses of radiation were estimated at the calculated depth of the ovaries using a solid plate phantom and an ionization chamber with the same lead cutout as was used for the treatment of Cesarean section operative scars and a tissue equivalent bolus. In total, the control rate was 77% (20 patients), while six (23%) developed focally elevated keloids (ranging from 0.5 to 2 cm in length) in the middle of the primary abdominal scar. Five patients experienced mild hyperpigmentation. Nonetheless, most patients (96%) were satisfied with the treatment results. The estimated percentage of the applied radiation doses that reached the calculated depth of the ovaries ranged from 0.0033% to 0.0062%. When administered during the immediate postpartum period, postoperative electron beam radiotherapy for repeated Cesarean section scars is generally safe and produces good cosmetic results with minimal toxicity.

A new species of Asplenium section Thamnopteris (Aspleniaceae) from Indonesia

NARCIS (Netherlands)

Dong, S.Y.; Mujahidin,; Wei, L.L.; Chao, Y.S.

2012-01-01

A new species, Asplenium riswanii (sect. Thamnopteris), is described from Central Java and West Papua, Indonesia. It is distinct from any known species by having thick and rigid fronds, abaxially keeled midribs, broadly lanceolate scales, and distantly spaced sori. Morphologically, A. riswanii is

Driver characteristics associated with child safety seat usage in Malaysia: a cross-sectional study.

Science.gov (United States)

Kulanthayan, S; Razak, Ahmad; Schenk, Ellen

2010-03-01

The rapidly motorizing environment in Malaysia has made child occupant safety a current public health concern. The usage of child safety seats (CSS) is a widely regarded intervention to enhance child occupant safety, yet no study has been conducted on CSS in Malaysia. This study aims to determine the CSS usage rates in Malaysia and to assess driver characteristics that are associated with CSS usage. Nine variables - urban versus rural study location, age, gender, marital status, educational status, monthly family income, number of children present in the vehicle, distance traveled to the study location, and attitude - were examined through a cross-sectional study of interviewing drivers of 230 vehicles transporting at least one child safety in Malaysia. The results indicate that interventional efforts should focus on educational programs geared toward drivers that are less educated or extended family members who inconsistently transport young children. Furthermore, any educational efforts could be strongly enhanced by legislation mandating the use of CSS. Every effort should be made to thoroughly assess the effectiveness of any educational or legislative activities that are implemented. Copyright 2009 Elsevier Ltd. All rights reserved.

Molecular phylogeny of Edraianthus (Grassy Bells; Campanulaceae) based on non-coding plastid DNA sequences

DEFF Research Database (Denmark)

Stefanovic, Sasa; Lakusic, Dmitar; Kuzmina, Maria

2008-01-01

The Balkan Peninsula is known as an ice-age refugium and an area with high rates of speciation and diversification. Only a few genera have their centers of distribution in the Balkans and the endemic genus Edraianthus is one of its most prominent groups. As such, Edraianthus is an excellent model...... divided into three sections: E. sect. Edraianthus, E. sect. Uniflori, and E. sect. Spathulati. We present here the first phylogenetic study of Edraianthus based on multiple plastid DNA sequences (trnL-F region and rbcL-atpB spacer) derived from a wide taxonomic sampling and geographic range. While...

Safety culture in a pharmacy setting using a pharmacy survey on patient safety culture: a cross-sectional study in China.

Science.gov (United States)

Jia, P L; Zhang, L H; Zhang, M M; Zhang, L L; Zhang, C; Qin, S F; Li, X L; Liu, K X

2014-06-30

To explore the attitudes and perceptions of patient safety culture for pharmacy workers in China by using a Pharmacy Survey on Patient Safety Culture (PSOPSC), and to assess the psychometric properties of the translated Chinese language version of the PSOPSC. Cross-sectional study. Data were obtained from 20 hospital pharmacies in the southwest part of China. We performed χ(2) test to explore the differences on pharmacy staff in different hospital and qualification levels and countries towards patient safety culture. We also computed descriptive statistics, internal consistency coefficients and intersubscale correlation analysis, and then conducted an exploratory factor analysis. A test-retest was performed to assess reproducibility of the items. A total of 630 questionnaires were distributed of which 527 were responded to validly (response rate 84%). The positive response rate for each item ranged from 37% to 90%. The positive response rate on three dimensions ('Teamwork', 'Staff Training and Skills' and 'Staffing, Work Pressure and Pace') was higher than that of Agency for Healthcare Research and Quality (AHRQ) data (pculture at different hospital and qualification levels. The internal consistency of the total survey was comparatively satisfied (Cronbach's α=0.89). The results demonstrated that among the pharmacy staffs surveyed in China, there was a positive attitude towards patient safety culture in their organisations. Identifying perspectives of patient safety culture from pharmacists in different hospital and qualification levels are important, since this can help support decisions about action to improve safety culture in pharmacy settings. The Chinese translation of the PSOPSC questionnaire (V.2012) applied in our study is acceptable. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Phylogenetic analysis of Monascus and new species from honey, pollen and nests of stingless bees

DEFF Research Database (Denmark)

Barbosa, R. N.; Leong, Su-lin L.; Vinnere-Pettersson, O.

2017-01-01

on this polyphasic approach, the genus Monascus is resolved in nine species, including three new species associated with stingless bees (M. flavipigmentosus sp. nov., M. mellicola sp. nov., M. recifensis sp. nov., M. argentinensis, M. floridanus, M. lunisporas, M. pallens, M. purpureus, M. ruber), and split in two...... new sections (section Floridani sect. nov., section Rubri sect. nov.). Phylogenetic analysis showed that the xerophile Monascus eremophilus does not belong in Monascus and monophyly in Monascus is restored with the transfer of M. eremophilus to Penicillium (P. eremophilum comb. nov.). A list...

Chromosome numbers and karyotype evolution in holoparasitic Orobanche (Orobanchaceae) and related genera

Science.gov (United States)

Schneeweiss, G.M.; Palomeque, T.; Colwell, A.E.; Weiss-Schneeweiss, H.

2004-01-01

Chromosome numbers and karyotypes of species of Orobanche, Cistanche, and Diphelypaea (Orobanchaceae) were investigated, and 108 chromosome counts of 53 taxa, 19 counted for the first time, are presented with a thorough compilation of previously published data. Additionally, karyotypes of representatives of these genera, including Orobanche sects. Orobanche and Trionychon, are reported. Cistanche (x = 20) has large meta- to submetacentric chromosomes, while those of Diphelypaea (x = 19) are medium-sized submeta-to acrocentrics. Within three analyzed sections of Orobanche, sects. Myzorrhiza (x = 24) and Trionychon (x = 12) possess medium-sized submeta- to acrocentrics, while sect. Orobanche (x = 19) has small, mostly meta- to submetacentric, chromosomes. Polyploidy is unevenly distributed in Orobanche and restricted to a few lineages, e.g., O. sect. Myzorrhiza or Orobanche gracilis and its relatives (sect. Orobanche). The distribution of basic chromosome numbers supports the groups found by molecular phylogenetic analyses: Cistanche has x = 20, the Orobanche-group (Orobanche sect. Orobanche, Diphelypaea) has x = 19, and the Phelipanche-group (Orobanche sects. Gymnocaulis, Myzorrhiza, Trionychon) has x = 12, 24. A model of chromosome number evolution in Orobanche and related genera is presented: from two ancestral base numbers, xh = 5 and xh = 6, independent polyploidizations led to x = 20 (Cistanche) and (after dysploidization) x = 19 (Orobanche-group) and to x = 12 and x = 24 (Phelipanche-group), respectively.

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

Waste management and licensing

International Nuclear Information System (INIS)

Dauk, W.

1980-01-01

It is the Court's consideration of the repercussions the regulation on waste management of Sect. 9a of the Atomic Energy Law will have, relating to the licensing of a plant according to Sect. 7 (2) of the Atomic Energy Law which is noteworthy. Overruling its former legal conception, the Administrative Court Schleswig now assumes, together with the public opinion, that the problem of waste management being brought to a point only with the initial operation of a nuclear power station is accordingly to be taken into account in line with the discretion of licensing according to Sect. 7 (2) of the Atomic Energy Law. In addition, the Administrative Court expressed its opinion on the extent to the right of a neighbour to a nuclear power station to file suit. According to the Sections 114 and 42 (2) of the rules of Administrative Courts it is true that a plaintiff cannot take action to set aside the licence because public interests have not been taken into account sufficiently, but he may do so because his own interests have not been included in the discretionary decision. The Administrative Court is reserved when qualifying the regulation on waste management with regard to the intensity of legal control. The Court is not supposed to replace controversial issues of technology and natural sciences on the part of the executive and its experts by its own assessment. According to the proceedings, the judicial review refers to the finding as to whether decisions made by authorities are suited - according to the way in which they were made - to guarantee the safety standard prescribed in Subdivision 3 of Sect. 7 (2) of the Atomic Energy Law. (HSCH) [de

A phylogenetic study of Boletus section Boletus in Europe

NARCIS (Netherlands)

Beugelsdijk, D.C.M.; Linde, van der S.; Zuccarello, G.C.; Bakker, den H.C.

2008-01-01

A phylogenetic study of the species in Boletus sect. Boletus was undertaken using the molecular markers ITS1-5.8S-ITS2 and Gap dh. Four well-supported lineages, one comprising Boletus edulis s.l., the others referring to B. aereus, B. reticulatus and B. pinophilus have been distinguished. The ML and

Strengthening leadership as a catalyst for enhanced patient safety culture: a repeated cross-sectional experimental study.

Science.gov (United States)

Kristensen, Solvejg; Christensen, Karl Bang; Jaquet, Annette; Møller Beck, Carsten; Sabroe, Svend; Bartels, Paul; Mainz, Jan

2016-05-13

Current literature emphasises that clinical leaders are in a position to enable a culture of safety, and that the safety culture is a performance mediator with the potential to influence patient outcomes. This paper aims to investigate staff's perceptions of patient safety culture in a Danish psychiatric department before and after a leadership intervention. A repeated cross-sectional experimental study by design was applied. In 2 surveys, healthcare staff were asked about their perceptions of the patient safety culture using the 7 patient safety culture dimensions in the Safety Attitudes Questionnaire. To broaden knowledge and strengthen leadership skills, a multicomponent programme consisting of academic input, exercises, reflections and discussions, networking, and action learning was implemented among the clinical area level leaders. In total, 358 and 325 staff members participated before and after the intervention, respectively. 19 of the staff members were clinical area level leaders. In both surveys, the response rate was >75%. The proportion of frontline staff with positive attitudes improved by ≥5% for 5 of the 7 patient safety culture dimensions over time. 6 patient safety culture dimensions became more positive (increase in mean) (pculture are remarkable, and imply that strengthening the leadership can act as a significant catalyst for patient safety culture improvement. Further studies using a longitudinal study design are recommended to investigate the mechanism behind leadership's influence on patient safety culture, sustainability of improvements over time, and the association of change in the patient safety culture measures with change in psychiatric patient safety outcomes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

New penicillin-producing Penicillium species and an overview of section Chrysogena

NARCIS (Netherlands)

Houbraken, J.; Frisvad, J.C.; Seifert, K.A.; Overy, D.P.; Tuthill, D.M.; Valdez, J.G.; Samson, R.A.

2012-01-01

Species classified in Penicillium sect. Chrysogena are primary soil-borne and the most well-known members are P. chrysogenum and P. nalgiovense. Penicillium chrysogenum has received much attention because of its role in the production on penicillin and as a contaminant of indoor environments and

Patient safety culture in out-of-hours primary care services in the Netherlands: a cross-sectional survey.

Science.gov (United States)

Smits, Marleen; Keizer, Ellen; Giesen, Paul; Deilkås, Ellen Catharina Tveter; Hofoss, Dag; Bondevik, Gunnar Tschudi

2018-03-01

To examine patient safety culture in Dutch out-of-hours primary care using the safety attitudes questionnaire (SAQ) which includes five factors: teamwork climate, safety climate, job satisfaction, perceptions of management and communication openness. Cross-sectional observational study using an anonymous web-survey. Setting Sixteen out-of-hours general practitioner (GP) cooperatives and two call centers in the Netherlands. Subjects Primary healthcare providers in out-of-hours services. Main outcome measures Mean scores on patient safety culture factors; association between patient safety culture and profession, gender, age, and working experience. Overall response rate was 43%. A total of 784 respondents were included; mainly GPs (N = 470) and triage nurses (N = 189). The healthcare providers were most positive about teamwork climate and job satisfaction, and less about communication openness and safety climate. The largest variation between clinics was found on safety climate; the lowest on teamwork climate. Triage nurses scored significantly higher than GPs on each of the five patient safety factors. Older healthcare providers scored significantly higher than younger on safety climate and perceptions of management. More working experience was positively related to higher teamwork climate and communication openness. Gender was not associated with any of the patient safety factors. Our study showed that healthcare providers perceive patient safety culture in Dutch GP cooperatives positively, but there are differences related to the respondents' profession, age and working experience. Recommendations for future studies are to examine reasons for these differences, to examine the effects of interventions to improve safety culture and to make international comparisons of safety culture. Key Points Creating a positive patient safety culture is assumed to be a prerequisite for quality and safety. We found that: • healthcare providers in Dutch GP cooperatives

Triangulating case-finding tools for patient safety surveillance: a cross-sectional case study of puncture/laceration.

Science.gov (United States)

Taylor, Jennifer A; Gerwin, Daniel; Morlock, Laura; Miller, Marlene R

2011-12-01

To evaluate the need for triangulating case-finding tools in patient safety surveillance. This study applied four case-finding tools to error-associated patient safety events to identify and characterise the spectrum of events captured by these tools, using puncture or laceration as an example for in-depth analysis. Retrospective hospital discharge data were collected for calendar year 2005 (n=48,418) from a large, urban medical centre in the USA. The study design was cross-sectional and used data linkage to identify the cases captured by each of four case-finding tools. Three case-finding tools (International Classification of Diseases external (E) and nature (N) of injury codes, Patient Safety Indicators (PSI)) were applied to the administrative discharge data to identify potential patient safety events. The fourth tool was Patient Safety Net, a web-based voluntary patient safety event reporting system. The degree of mutual exclusion among detection methods was substantial. For example, when linking puncture or laceration on unique identifiers, out of 447 potential events, 118 were identical between PSI and E-codes, 152 were identical between N-codes and E-codes and 188 were identical between PSI and N-codes. Only 100 events that were identified by PSI, E-codes and N-codes were identical. Triangulation of multiple tools through data linkage captures potential patient safety events most comprehensively. Existing detection tools target patient safety domains differently, and consequently capture different occurrences, necessitating the integration of data from a combination of tools to fully estimate the total burden.

CSRL-V ENDF/B-V 227-group neutron cross-section library and its application to thermal-reactor and criticality safety benchmarks

International Nuclear Information System (INIS)

Ford, W.E. III; Diggs, B.R.; Knight, J.R.; Greene, N.M.; Petrie, L.M.; Webster, C.C.; Westfall, R.M.; Wright, R.Q.; Williams, M.L.

1982-01-01

Characteristics and contents of the CSRL-V (Criticality Safety Reference Library based on ENDF/B-V data) 227-neutron-group AMPX master and pointwise cross-section libraries are described. Results obtained in using CSRL-V to calculate performance parameters of selected thermal reactor and criticality safety benchmarks are discussed

[A new taxonomic system of the genus Murraya (Rutaceae) based on integration of morphology-based taxonomy and chemotaxonomy; and a philological survey on M. exotica in view of the relationship between Okinawa and China].

Science.gov (United States)

Kinoshita, Takeshi

2014-01-01

This review concerns the taxonomic status of the genus Murraya in tribe Clausenae, subfamily Aurantioideae, family Rutaceae, and presents a new system integrating both morphology-based taxonomy and chemotaxonomy. This genus has been morphologically divided into the sects Murraya and Bergera. This dichotomy is justified by the noticeable difference of secondary metabolites with 3-prenylindoles in Murraya and carbazoles in Bergera. As for other metabolites of genus Murraya, coumarins are found in both sects, but differ clearly in types; 8-prenylcoumarins occur throughout the sect Murraya whereas geranylated furocoumarins are known from some species of the sect Bergera. As far as chemical properties are concerned, sect Bergera is much closer to genus Clausena than sect Murraya, suggesting the dichotomy of genus Murraya to be generic rather than sectional. 8-Prenylcoumarins characterizing sect Murraya play a decisive role in the distinction of M. exotica from M. paniculata that occurs most widely in subtropical and tropical Asia and is well known for morphologic as well as chemical diversity. Though the morphological difference between the two species is slight only in leaves and leaflets, the distinction is well substantiated by the following chemical feature: 7-OMe-8-prenylcoumarins occur in M. exotica whereas 5,7-di-OMe-8-prenylcoumarins in M. paniculata. Sect Murraya has a very close relation to genus Merrillia that is chemically characterized by similar types of 8-prenylcoumarins, and is also related to a certain extent to genus Micromelum. M. exotica is philologically surveyed in view of the delicate relationships between Okinawa, the only habitat of this plant in Japan, and China in order to clarify its historical background.

Patient-reported safety incidents in older patients with long-term conditions: a large cross-sectional study.

Science.gov (United States)

Panagioti, Maria; Blakeman, Thomas; Hann, Mark; Bower, Peter

2017-05-30

Increasing evidence suggests that patient safety is a serious concern for older patients with long-term conditions. Despite this, there is a lack of research on safety incidents encountered by this patient group. In this study, we sought to examine patient reports of safety incidents and factors associated with reports of safety incidents in older patients with long-term conditions. The baseline cross-sectional data from a longitudinal cohort study were analysed. Older patients (n=3378 aged 65 years and over) with a long-term condition registered in general practices were included in the study. The main outcome was patient-reported safety incidents including availability and appropriateness of medical tests and prescription of wrong types or doses of medication. Binary univariate and multivariate logistic regression analyses were undertaken to examine factors associated with patient-reported safety incidents. Safety incidents were reported by 11% of the patients. Four factors were significantly associated with patient-reported safety incidents in multivariate analyses. The experience of multiple long-term conditions (OR=1.09, 95% CI 1.05 to 1.13), a probable diagnosis of depression (OR=1.36, 95% CI 1.06 to 1.74) and greater relational continuity of care (OR=1.28, 95% CI 1.08 to 1.52) were associated with increased odds for patient-reported safety incidents. Perceived greater support and involvement in self-management was associated with lower odds for patient-reported safety incidents (OR=0.95, 95% CI 0.93 to 0.97). We found that older patients with multimorbidity and depression are more likely to report experiences of patient safety incidents. Improving perceived support and involvement of patients in their care may help prevent patient-reported safety incidents. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Patient Safety Culture in Intensive Care Units from the Perspective of Nurses: A Cross-Sectional Study.

Science.gov (United States)

Farzi, Sedigheh; Moladoost, Azam; Bahrami, Masoud; Farzi, Saba; Etminani, Reza

2017-01-01

One of the goals of nursing is providing safe care, prevention of injury, and health promotion of patients. Patient safety in intensive care units is threatened for various reasons. This study aimed to survey patient safety culture from the perspective of nurses in intensive care units. This cross-sectional study was conducted in 2016. Sampling was done using the convenience method. The sample consisted of 367 nurses working in intensive care units of teaching hospitals affiliated to Isfahan University of Medical Sciences. Data collection was performed using a two-part questionnaire that included demographic and hospital survey on Patient Safety Culture (HSOPSC) questionnaire. Data analysis was done using descriptive statistics (mean and standard deviation). Among the 12 dimensions of safety culture, the nurses assigned the highest score to "team work within units" (97.3%) and "Organizational learning-continuous improvement" (84%). They assigned the least score to "handoffs and transitions"(21.1%), "non-punitive response to errors" (24.7%), "Staffing" (35.6%), "Communication openness" (47.5%), and "Teamwork across units" (49.4%). The patient safety culture dimensions have low levels that require adequate attention and essential measures of health care centers including facilitating teamwork, providing adequate staff, and developing a checklist of handoffs and transitions. Furthermore, to increase reporting error and to promote a patient safety culture in intensive care units, some strategies should be adopted including a system-based approach to deal with the error.

Fieldcrest Cannon, Inc. Advanced Technical Preparation. Statistical Process Control (SPC). Safety Section: Modules 1-3. Instructor Book.

Science.gov (United States)

Averitt, Sallie D.

These three modules, which were developed for use by instructors in a manufacturing firm's advanced technical preparation program, contain the materials required to present the safety section of the plant's adult-oriented, job-specific competency-based training program. The 3 modules contain 12 lessons on the following topics: lockout/tagout…

Safety assessment and verification for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2001-01-01

verification' are used differently in different countries. The way that these terms have been used in this Safety Guide is explained in Section 2. The term 'design' as used here includes the specifications for the safe operation and management of the plant. This Safety Guide identifies the key recommendations for carrying out the safety assessment and the independent verification. It provides detailed guidance in support of IAEA, Safety of Nuclear Power Plants: Design, Safety Standards Series No. NS-R-1 (2000), particularly in the area of safety analysis. However, this does not include all the technical details which are available and reference is made to other IAEA publications on specific design issues and safety analysis methods. Specific deterministic or probabilistic safety targets or radiological limits can vary in different countries and are the responsibility of the regulatory body. This Safety Guide provides some references to targets and limits established by international organizations. Operators, and sometimes designers, may also set their own safety targets which may be more stringent than those set by the regulator or may address different aspects of safety. In some countries operators are expected to do this as part of their 'ownership' of the entire safety case. This Safety Guide does not include specific recommendations for the safety assessment of those plant systems for which dedicated Safety Guides exist. Section 2 defines the terms 'safety assessment', 'safety analysis' and 'independent verification' and outlines their relationship. Section 3 gives the key recommendations for the safety assessment of the principal and plant design requirements. Section 4 gives the key recommendations for safety analysis. It describes the identification of postulated initiating events (PIEs), which are used throughout the safety assessment including the safety analysis, the deterministic transient analysis and severe accident analysis, and the probabilistic safety analysis

Patient safety culture in intensive care units from the perspective of nurses: A cross-sectional study

Directory of Open Access Journals (Sweden)

Sedigheh Farzi

2017-01-01

Full Text Available Background: One of the goals of nursing is providing safe care, prevention of injury, and health promotion of patients. Patient safety in intensive care units is threatened for various reasons. This study aimed to survey patient safety culture from the perspective of nurses in intensive care units. Materials and Methods: This cross-sectional study was conducted in 2016. Sampling was done using the convenience method. The sample consisted of 367 nurses working in intensive care units of teaching hospitals affiliated to Isfahan University of Medical Sciences. Data collection was performed using a two-part questionnaire that included demographic and hospital survey on Patient Safety Culture (HSOPSC questionnaire. Data analysis was done using descriptive statistics (mean and standard deviation. Results: Among the 12 dimensions of safety culture, the nurses assigned the highest score to “team work within units” (97.3% and “Organizational learning-continuous improvement” (84%. They assigned the least score to “handoffs and transitions”(21.1%, “non-punitive response to errors” (24.7%, “Staffing” (35.6%, “Communication openness” (47.5%, and “Teamwork across units” (49.4%. Conclusions: The patient safety culture dimensions have low levels that require adequate attention and essential measures of health care centers including facilitating teamwork, providing adequate staff, and developing a checklist of handoffs and transitions. Furthermore, to increase reporting error and to promote a patient safety culture in intensive care units, some strategies should be adopted including a system-based approach to deal with the error.

Implementation of the surgical safety checklist in Switzerland and perceptions of its benefits: cross-sectional survey.

Directory of Open Access Journals (Sweden)

Stéphane Cullati

Full Text Available OBJECTIVES: To examine the implementation of the Surgical Safety Checklist (SSC among surgeons and anaesthetists working in Swiss hospitals and clinics and their perceptions of the SSC. METHODS: Cross-sectional survey at the 97th Annual Meeting of the Swiss Society of Surgery, Switzerland, 2010. Opinions of the SSC were assessed with a 6-item questionnaire. RESULTS: 152 respondents answered the questionnaire (participation rate 35.1%. 64.7% respondents acknowledged having a checklist in their hospital or their clinic. Median implementation year was 2009. More than 8 out of 10 respondents reported their team applied the Sign In and the Time Out very often or quasi systematically, whereas almost half of respondents acknowledged the Sign Out was applied never or rarely. The majority of respondents agreed that the checklist improves safety and team communication, and helps to develop a safety culture. However, they were less supportive about the opinion that the checklist facilitates teamwork and eliminates social hierarchy between caregivers. CONCLUSIONS: This survey indicates that the SSC has been largely implemented in many Swiss hospitals and clinics. Both surgeons and anaesthetists perceived the SSC as a valuable tool in improving intraoperative patient safety and communication among health care professionals, with lesser importance in facilitating teamwork (and eliminating hierarchical categories.

A cross-sectional study to identify organisational processes associated with nurse-reported quality and patient safety

Science.gov (United States)

Tvedt, Christine; Sjetne, Ingeborg Strømseng; Helgeland, Jon; Bukholm, Geir

2012-01-01

Objectives The purpose of this study was to identify organisational processes and structures that are associated with nurse-reported patient safety and quality of nursing. Design This is an observational cross-sectional study using survey methods. Setting Respondents from 31 Norwegian hospitals with more than 85 beds were included in the survey. Participants All registered nurses working in direct patient care in a position of 20% or more were invited to answer the survey. In this study, 3618 nurses from surgical and medical wards responded (response rate 58.9). Nurses' practice environment was defined as organisational processes and measured by the Nursing Work Index Revised and items from Hospital Survey on Patient Safety Culture. Outcome measures Nurses' assessments of patient safety, quality of nursing, confidence in how their patients manage after discharge and frequency of adverse events were used as outcome measures. Results Quality system, nurse–physician relation, patient safety management and staff adequacy were process measures associated with nurse-reported work-related and patient-related outcomes, but we found no associations with nurse participation, education and career and ward leadership. Most organisational structures were non-significant in the multilevel model except for nurses’ affiliations to medical department and hospital type. Conclusions Organisational structures may have minor impact on how nurses perceive work-related and patient-related outcomes, but the findings in this study indicate that there is a considerable potential to address organisational design in improvement of patient safety and quality of care. PMID:23263021

Two major groups of chloroplast DNA haplotypes in diploid and tetraploid Aconitum subgen. Aconitum (Ranunculaceae in the Carpathians

Directory of Open Access Journals (Sweden)

J. Mitka

2016-04-01

Full Text Available Aconitum in Europe is represented by ca. 10% of the total number of species and the Carpathian Mts. are the center of the genus variability in the subcontinent. We studied the chloroplast DNA intergenic spacer trnL(UAG-rpl32- ndhF (cpDNA variability of the Aconitum subgen. Aconitum in the Carpathians: diploids (2n=16, sect. Cammarum, tetraploids (2n=32, sect. Aconitum and triploids (2n=24, nothosect. Acomarum. Altogether 25 Aconitum accessions representing the whole taxonomic variability of the subgenus were sequenced and subjected to phylogenetic analyses. Both parsimony, Bayesian and character network analyses showed the two distinct types of the cpDNA chloroplast, one typical of the diploid and the second of the tetraploid groups. Some specimens had identical cpDNA sequences (haplotypes and scattered across the whole mountain arch. In the sect. Aconitum 9 specimens shared one haplotype, while in the sect. Camarum one haplotype represents 4 accessions and the second – 5 accessions. The diploids and tetraploids were diverged by 6 mutations, while the intrasectional variability amounted maximally to 3 polymorphisms. Taking into consideration different types of cpDNA haplotypes and ecological profiles of the sections (tetraploids – high‑mountain species, diploids – species from forest montane belt we speculate on the different and independent history of the sections in the Carpathians.

Patient safety in practical nurses' education: A cross-sectional survey of newly registered practical nurses in Canada.

Science.gov (United States)

VanDenKerkhof, Elizabeth; Sears, Nancy; Edge, Dana S; Tregunno, Deborah; Ginsburg, Liane

2017-04-01

Practical nurses have experienced an increasing scope of practice, including an expectation to care for complex patients and function on interdisciplinary teams. Little is known about the degree to which patient safety principles are addressed in practical nursing education. To examine self-reported patient safety competencies of practical nurses. A cross-sectional online survey (July 2014) and face-to-face interviews (June 2015). Ontario, Canada. Survey participants were practical nurses newly registered with the College of Nurses of Ontario between January 2012 and December 2013. Interview participants were faculty and students in a practical nursing program in Ontario. Survey respondents completed the Health Professional Education in Patient Safety Survey online. Self-reported competencies in various patient safety domains were compared between classroom and clinical settings. Faculty members were interviewed about educational preparation of practical nurses and students were interviewed to provide insight into interpretation of survey questions. The survey response rate was 28.4% (n=1104/3883). Mean domain scores indicated a high level of confidence in patient safety competence (Nurses of Ontario >2years and in those who obtained their education outside of Canada. Faculty believed their approach to teaching and learning instilled a deep understanding of the limits to practical nurse autonomous practice. Practical nurses were confident in what they learned about patient safety in their educational programs. The high degree of patient safety competence may be a true reflection of practical nurses understanding of, and comfort with, the limits of their knowledge and, ultimately, the limits of their individual autonomous practice. Further exploration as to whether the questionnaire requires additional modification for use with practical nurse populations is warranted. However, this study provides the first examination of practical nurses' perspectives and

Algebraic Systems and Pushdown Automata

Science.gov (United States)

Petre, Ion; Salomaa, Arto

We concentrate in this chapter on the core aspects of algebraic series, pushdown automata, and their relation to formal languages. We choose to follow here a presentation of their theory based on the concept of properness. We introduce in Sect. 2 some auxiliary notions and results needed throughout the chapter, in particular the notions of discrete convergence in semirings and C-cycle free infinite matrices. In Sect. 3 we introduce the algebraic power series in terms of algebraic systems of equations. We focus on interconnections with context-free grammars and on normal forms. We then conclude the section with a presentation of the theorems of Shamir and Chomsky-Schützenberger. We discuss in Sect. 4 the algebraic and the regulated rational transductions, as well as some representation results related to them. Section 5 is dedicated to pushdown automata and focuses on the interconnections with classical (non-weighted) pushdown automata and on the interconnections with algebraic systems. We then conclude the chapter with a brief discussion of some of the other topics related to algebraic systems and pushdown automata.

Metals and Ceramics Division progress report for period ending December 31, 1993

Energy Technology Data Exchange (ETDEWEB)

Craig, D.F.; Bradley, R.A.; Weir, J.R. Jr.

1994-07-01

This report provides an overview of activities and accomplishsments of the division from October 1992 through December 1993; the division is organized to provide technical support, mainly in the area of high-temperature materials, for technologies being developed by DOE. Activities span the range from basic research to industrial interactions (cooperative research and technology transfer). Sections 1-5 describe the different functional groups (engineering materials, high-temperature materials, materials science, ceramics, nuclear fuel materials). Sect. 6 provides an alternative view of the division in terms of the major programs, most of which cross group lines. Sect. 7 summarizes external interactions including cooperative R and D programs and technology transfer functions. Finally, Sect. 8 briefly describes the division`s involvement in educational activities. Several organizational changes were effected during this period.

Revision of Aspergillus section Flavipedes: seven new species and proposal of section Jani sect. nov

Czech Academy of Sciences Publication Activity Database

Hubka, Vít; Nováková, Alena; Kolařík, Miroslav; Jurjevič, Ž.; Peterson, S.W.

2015-01-01

Roč. 107, č. 1 (2015), s. 169-208 ISSN 0027-5514 R&D Projects: GA MŠk(CZ) EE2.3.20.0055; GA MŠk(CZ) EE2.3.30.0003 Institutional support: RVO:61388971 Keywords : Aspergillus flavipes * cave mycobiota * Fennellia Subject RIV: EE - Microbiology, Virology Impact factor: 2.638, year: 2015

Legal aspects of damage prevention in atomic law

International Nuclear Information System (INIS)

Roller, Gerhard

2011-01-01

The author discusses the regulations of Sect. 7d AtG, i.e. the claim that it will ensure greater safety. He claims that, contrary to this intention, it has made the regulations of atomic law more complex and more difficult to observe. (orig./AKB)

Comparison of species composition and fumonisin production in Aspergillus section Nigri populations in maize kernels from USA and Italy.

Science.gov (United States)

Susca, Antonia; Moretti, Antonio; Stea, Gaetano; Villani, Alessandra; Haidukowski, Miriam; Logrieco, Antonio; Munkvold, Gary

2014-10-01

Fumonisin contamination of maize is considered a serious problem in most maize-growing regions of the world, due to the widespread occurrence of these mycotoxins and their association with toxicosis in livestock and humans. Fumonisins are produced primarily by species of Fusarium that are common in maize grain, but also by some species of Aspergillus sect. Nigri, which can also occur on maize kernels as opportunistic pathogens. Understanding the origin of fumonisin contamination in maize is a key component in developing effective management strategies. Although some fungi in Aspergillus sect. Nigri are known to produce fumonisins, little is known about the species which are common in maize and whether they make a measurable contribution to fumonisin contamination of maize grain. In this work, we evaluated populations of Aspergillus sect. Nigri isolated from maize in USA and Italy, focusing on analysis of housekeeping genes, the fum8 gene and in vitro capability of producing fumonisins. DNA sequencing was used to identify Aspergillus strains belonging to sect. Nigri, in order to compare species composition between the two populations, which might influence specific mycotoxicological risks. Combined beta-tubulin/calmodulin sequences were used to genetically characterize 300 strains (199 from Italy and 101 from USA) which grouped into 4 clades: Aspergillus welwitschiae (syn. Aspergillus awamori, 14.7%), Aspergillus tubingensis (37.0%) and Aspergillus niger group 1 (6.7%) and group 2 (41.3%). Only one strain was identified as Aspergillus carbonarius. Species composition differed between the two populations; A. niger predominated among the USA isolates (69%), but comprised a smaller percentage (38%) of Italian isolates. Conversely, A. tubingensis and A. welwitschiae occurred at higher frequencies in the Italian population (42% and 20%, respectively) than in the USA population (27% and 5%). The evaluation of FB2 production on CY20S agar revealed 118 FB2 producing and 84

Small business owners' health and safety intentions: A cross-sectional survey

Directory of Open Access Journals (Sweden)

Li Shelby

2005-10-01

Full Text Available Abstract Background Little is known about the variables underlying small business owners' behavioural intentions toward workplace health and safety. This project explores the relationship between three mediating variables (Attitude Toward Safety, Subjective Norm and Perceived Behavioural Control and owners' Intentions Toward Safety, following the Theory of Planned Behaviour. We also investigate the role of beliefs underlying each mediating variable. Methods Seven hundred businesses (5–50 employees were randomly selected from 4084 eligible companies in a manufacturing business database (SIC codes 24 to 39. The 348 respondents are on average 51 yrs of age, 86% male, 96% white and have 2 to 4 years of post-secondary school. Results All three mediator variables are significantly correlated with Intentions Toward Safety; Attitude Toward Safety shows the strongest correlation, which is confirmed by path analysis. Owners with higher attitudes toward safety have a higher probability of believing that improving workplace health and safety will make employees' healthier and happier, show that they care, increase employee productivity, lower workers' compensation costs, increase product quality and lower costs. Conclusion These results suggest that interventions aimed at increasing owners' health and safety intentions (and thus, behaviours should focus on demonstrating positive employee health and product quality outcomes.

The rediscovery of Astragalus autranii (Fabaceae) on Mt Tomor, south central Albania

DEFF Research Database (Denmark)

Tan, Kit; Shuka, Lulezim; Gjeta, Ermelinda

2015-01-01

Astragalus autranii (Fabaceae) placed by Sytin & Podlech in a section of its own (A. sect. Baldaccia) was described from a single specimen in the Barbey-Boissier Herbarium at Geneva. Our observations show that its placement in A. sect. Hololeuce would also be appropriate. The species was first co...... by Markgraf. Information on habitat, ecology and threat status are also detailed for the first time. Mt Tomor is designated as a protected National Park; however, some of the Astragalus populations may be affected by future road construction....

Safety advice sheets

CERN Multimedia

HSE Unit

2013-01-01

You never know when you might be faced with questions such as: when/how should I dispose of a gas canister? Where can I find an inspection report? How should I handle/store/dispose of a chemical substance…?   The SI section of the DGS/SEE Group is primarily responsible for safety inspections, evaluating the safety conditions of equipment items, premises and facilities. On top of this core task, it also regularly issues “Safety Advice Sheets” on various topics, designed to be of assistance to users but also to recall and reinforce safety rules and procedures. These clear and concise sheets, complete with illustrations, are easy to display in the appropriate areas. The following safety advice sheets have been issued so far: Other sheets will be published shortly. Suggestions are welcome and should be sent to the SI section of the DGS/SEE Group. Please send enquiries to general-safety-visits.service@cern.ch.

Validation of Nuclear Criticality Safety Software and 27 energy group ENDF/B-IV cross sections

International Nuclear Information System (INIS)

Lee, B.L. Jr.

1994-08-01

The validation documented in this report is based on calculations that were executed during June through August 1992, and was completed in June 1993. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Martin Marietta Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM 3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. When the validation results are treated as a single group, there is 95% confidence that 99.9% of future calculations of similar critical systems will have a calculated K eff > 0.9616. Based on this result the Portsmouth Nuclear Criticality Safety Department has adopted the calculational acceptance criteria that a k eff + 2σ ≤ 0.95 is safety subcritical. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

Perceptions of patient safety culture among healthcare employees in tertiary hospitals of Heilongjiang province in northern China: a cross-sectional study.

Science.gov (United States)

Li, Ying; Zhao, Yanming; Hao, Yanhua; Jiao, Mingli; Ma, Hongkun; Teng, Baijun; Yang, Kai; Sun, Tongbo; Wu, Qunhong; Qiao, Hong

2018-04-19

Assessing the patient safety culture is necessary for improving patient safety. Research on patient safety culture has attracted considerable attention. Currently, there is little research on patient safety culture in China generally, and in Heilongjiang in northern China specifically. The aim of the study is to explore the perception of healthcare employees about patient safety culture and to determine whether perception differs per sex, age, profession, years of experience, education level and marital status. Cross-sectional study. Thirteen tertiary hospitals in Heilongjiang, northern China. About 1024 healthcare employees. The perception of healthcare employees was measured using the safety attitude questionnaire, which include six dimensions. Higher scores represented more positive attitudes. An analysis of variance was used to compare socio-demographic differences per position, marital status and education; t-tests were used for sex, age and experience. A total of 1024 (85.33%) valid questionnaires were returned. The mean score of the six dimensions was 73.74/100; work conditions (80.19) had the highest score of all the dimensions, and safety climate (70.48) had the lowest. Across distinct dimensions, there were significant differences in perceptions of patient safety culture per sex, age, years of experience, position, marital status and education level (P culture among healthcare employees and identifying dimensions that require improvement. Interventions aimed at specific socio-demographic groups are necessary to improve patient safety culture.

Influence of parental perception of school safety and gender on children's physical activity in Mexico: A cross sectional study.

Science.gov (United States)

Hutchens, Amy; Soltero, Erica G; Barquera, Simón; Lévesque, Lucie; Jauregui, Edtna; López Y Taylor, Juan; Lee, Rebecca E

2016-01-01

This cross sectional study aims to determine the effects of gender and parental perception of safety at school on children's physical activity (PA) levels. Parents of school aged Mexican children residing in Guadalajara, Mexico City, and Puerto Vallarta, completed surveys about their children's PA measures. The physical activity indicators were evaluated using linear and logistical regression models. Analysis did not indicate that gender moderated the relationship between parental perception of safety and PA measures, but significant gender issues exist with girls participating less than boys in the three measures of PA in this study (p<0.001). Results suggest the need for additional interventions promoting physical activity in girls in Mexico.

Protection of continued economic existence and major changes. 1. paper

International Nuclear Information System (INIS)

Backherms, J.

1980-01-01

On the issue of protecting continued economic existence according to Sect. 18 of the Atomic Energy Law, a difference is made between changes occurring in the environment of the plant, in the existing knowledge in science and technology, and changes occurring in the safety philosophy held by the authorities. In case of conditions being subsequently imposed because of a change in the existing knowledge in science and technology, the liability of the authorities to pay compensation is ruled out according to Sect. 18, para. 2 No. 3 of the Atomic Energy Law. The difference made between a change in the safety philosophy held by the authorities and a change in the existing knowledge in science and technology seems to be obvious. In the first case it is a matter of changing the legal evaluation of unchanged technological findings, in the legal evaluation, however, the licence granted has to have a lasting effect on principle. (HP) [de

Standard Review Plan for the review of safety analysis reports for nuclear power plants, Revision No. 7 to Section 9

International Nuclear Information System (INIS)

1978-03-01

Revision No. 1 to Section 9 of the Standard Review Plan incorporates changes that have been developed since the original issuance in September 1975, many of which are editorial in nature, to reflect current staff practice in the review of safety analysis reports for nuclear power plants

A Guide to Laser Safety

Energy Technology Data Exchange (ETDEWEB)

Davies, W M

1998-09-01

In one of the few volumes dedicated to laser safety to appear since the 'bible' of Sliney and Wolbarsht, Roy Henderson sets out to provide the reader with a practical account of both the philosophy and practice across contemporary application of lasers. The book is split into three sections. The first section is essentially a non-mathematical review of lasers, optical hazards and laser safety. It is intended as an easily digestible introduction to the subject, conveying the primary concepts of laser safety without the camouflage of equations. This piece of text is manifestly readable by all who have interest in the topic. The second section introduces more meat onto the bones introduced in the first section and some of the practical mathematics necessary to determine optical irradiance in simple laser beams. The book is not intended as a scientific treatise and rigorous treatment of laser physics is left (for the better) to other texts. Laser hazard assessment and safety management are covered in sufficient detail to allow the reader to understand what precautions are necessary to mitigate the risks of laser use. The final section takes a brief look at laser safety in a number of specific industrial applications. These include industrial processing, medicine, telecommunications and entertainment. These should be taken in the context of the second section and are not stand-alone text. With few typographical errors, and packed with practical hints, this book serves as an excellent text for any educational course on laser safety and provides a quick and easy reference for laser safety officers. (book review: A Roy Henderson - ISBN: 0 412 72940 7)

Toxicological benchmarks for potential contaminants of concern for effects on soil and litter invertebrates and heterotrophic process

Energy Technology Data Exchange (ETDEWEB)

Will, M.E.; Suter, G.W. II

1995-09-01

An important step in ecological risk assessments is screening the chemicals occur-ring on a site for contaminants of potential concern. Screening may be accomplished by comparing reported ambient concentrations to a set of toxicological benchmarks. Multiple endpoints for assessing risks posed by soil-borne contaminants to organisms directly impacted by them have been established. This report presents benchmarks for soil invertebrates and microbial processes and addresses only chemicals found at United States Department of Energy (DOE) sites. No benchmarks for pesticides are presented. After discussing methods, this report presents the results of the literature review and benchmark derivation for toxicity to earthworms (Sect. 3), heterotrophic microbes and their processes (Sect. 4), and other invertebrates (Sect. 5). The final sections compare the benchmarks to other criteria and background and draw conclusions concerning the utility of the benchmarks.

Validation of nuclear criticality safety software and 27 energy group ENDF/B-IV cross sections. Revision 1

International Nuclear Information System (INIS)

Lee, B.L. Jr.; D'Aquila, D.M.

1996-01-01

The original validation report, POEF-T-3636, was documented in August 1994. The document was based on calculations that were executed during June through August 1992. The statistical analyses in Appendix C and Appendix D were completed in October 1993. This revision is written to clarify the margin of safety being used at Portsmouth for nuclear criticality safety calculations. This validation gives Portsmouth NCS personnel a basis for performing computerized KENO V.a calculations using the Lockheed Martin Nuclear Criticality Safety Software. The first portion of the document outlines basic information in regard to validation of NCSS using ENDF/B-IV 27-group cross sections on the IBM3090 at ORNL. A basic discussion of the NCSS system is provided, some discussion on the validation database and validation in general. Then follows a detailed description of the statistical analysis which was applied. The results of this validation indicate that the NCSS software may be used with confidence for criticality calculations at the Portsmouth Gaseous Diffusion Plant. For calculations of Portsmouth systems using the specified codes and systems covered by this validation, a maximum k eff including 2σ of 0.9605 or lower shall be considered as subcritical to ensure a calculational margin of safety of 0.02. The validation of NCSS on the IBM 3090 at ORNL was extended to include NCSS on the IBM 3090 at K-25

Advanced Stellar Compass - Proposal for the SMART-1 Project

DEFF Research Database (Denmark)

Jørgensen, John Leif; Betto, Maurizio; Kilsgaard, Søren

1998-01-01

and autonomous Stellar Reference Unit designed, developed and produced by the Space Instrumentation Group of the Department of Automation of the Technical University of Denmark.The document is structured as follows. First we present the ASC - heritage, system description, performance - then we address more...... like manufacturing, transportation and storage, in section 10 the requirements imposed by the ASC on the system are given and to conclude we address the financial issues (sect. 11) and we review the ASC specifications against the SMART-1 requirements and provide the compliance matrices (sect. 12)....

7 CFR 1724.55 - Dam safety.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Dam safety. 1724.55 Section 1724.55 Agriculture... § 1724.55 Dam safety. (a) The provisions of this section apply only to RUS financed electric system... for Dam Safety,”(Guidelines), as applicable. A dam, as more fully defined in the Guidelines, is...

14 CFR 1274.934 - Safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1274.934 Section 1274.934... FIRMS Other Provisions and Special Conditions § 1274.934 Safety. Safety July 2002 NASA's safety priority... shall act responsibly in matters of safety and shall take all reasonable safety measures in performing...

9 CFR 113.39 - Cat safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Cat safety tests. 113.39 Section 113... Procedures § 113.39 Cat safety tests. The safety tests provided in this section shall be conducted when... recommended for use in cats. (a) The cat safety test provided in this paragraph shall be used when the Master...

Partial Safety Factors for Rubble Mound Breakwaters

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Burcharth, H. F.; Christiani, E.

1995-01-01

On the basis of the failure modes formulated in the various subtasks calibration of partial safety factors are described in this paper. The partial safety factors can be used to design breakwaters under quite different design conditions, namely probabilities of failure from 0.01 to 0.4, design...... lifetimes from 20 to 100 years and different qualities of wave data. A code of practice where safety is taken into account using partial safety factors is called a level I code. The partial safety factors are calibrated using First Order Reliability Methods (FORM, see Madsen et al. [1]) where...... in section 3. First Order Reliability Methods are described in section 4, and in section 5 it is shown how partial safety factors can be introduced and calibrated. The format of a code for design and analysis of rubble mound breakwaters is discussed in section 6. The mathematical formulation of the limit...

Full depth bituminous recycling of I-70, Thomas County, Kansas

Science.gov (United States)

2004-01-01

In 1990, 13 full depth asphalt pavement test sections were built on a portion of I-70 in Thomas County, Kansas. Various combinations of hot mix and cold recycle mixes with different additives were used to build the test sections. Two of the test sect...

CSRL-V: processed ENDF/B-V 227-neutron-group and pointwise cross-section libraries for criticality safety, reactor, and shielding studies

International Nuclear Information System (INIS)

Ford, W.E. III; Diggs, B.R.; Petrie, L.M.; Webster, C.C.; Westfall, R.M.

1982-01-01

A P 3 227-neutron-group cross-section library has been processed for the subsequent generation of problem-dependent fine- or broad-group cross sections for a broad range of applications, including shipping cask calculations, general criticality safety analyses, and reactor core and shielding analyses. The energy group structure covers the range 10 -5 eV - 20 MeV, including 79 thermal groups below 3 eV. The 129-material library includes processed data for all materials in the ENDF/B-V General Purpose File, several data sets prepared from LENDL data, hydrogen with water- and polyethyelene-bound thermal kernels, deuterium with C 2 O-bound thermal kernels, carbon with a graphite thermal kernel, a special 1/V data set, and a dose factor data set. The library, which is in AMPX master format, is designated CSRL-V (Criticality Safety Reference Library based on ENDF/B-V data). Also included in CSRL-V is a pointwise total, fission, elastic scattering, and (n,γ) cross-section library containing data sets for all ENDF/B-V resonance materials. Data in the pointwise library were processed with the infinite dilute approximation at a temperature of 296 0 K

14 CFR 31.25 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 31.25 Section 31.25... STANDARDS: MANNED FREE BALLOONS Strength Requirements § 31.25 Factor of safety. (a) Except as specified in paragraphs (b) and (c) of this section, the factor of safety is 1.5. (b) A factor of safety of at least five...

Anatomia do escapo floral de espécies brasileiras de Paepalanthus subgênero Platycaulon (Eriocaulaceae Anatomy of the inflorescence scape of Brazilian species of the Paepalanthus subgenus Platycaulon (Eriocaulaceae

Directory of Open Access Journals (Sweden)

Vera Lucia Scatena

1998-08-01

Full Text Available Foi estudada a anatomia dos escapos de 17 espécies de Paepalanthus subgênero Platycaulon, sendo 10 da sect. Divisi e sete da sect. Conferti. O trabalho foi realizado para caracterizar anatomicamente os escapos. como contribuição para o entendimento do grupo, uma vez que. morfologicamente, esse é o caráter laxonômico mais importante. Procurou-se, também, confirmar ou não o reconhecimento das duas seções dentro do subgênero. Para os estudos anatômicos utilizou-se material proveniente do Brasil, obtido de exsicatas de diferentes herbários e/ou coletado na Serra do Cipó, MG. Neste trabalho observou-se que Paepalanthus subg. Platycaulon é caracterizado morfologicamente por apresentar escapos pluricapitulados no ápice. Anatomicamente, as espécies estudadas da sect. Divisi apresentam escapos com vários cilindros vasculares, na região mediana e, ainda apresentam, em Paepalanthus vellozioides e P. spixianus, feixes vasculares corticais, características únicas na família. Diferentemente, as espécies avaliadas da sect. Conferti apresentam escapos com cilindro vascular único na região mediana, padrão análogo ao das demais Eriocaulaccae, e ainda apresentam, em Paepalanthus itatiaiensis, P. planifolius e P. paulensis, feixes vasculares medulares, que até então não haviam sido referidos para a família.The scape anatomy of 17 taxa of Paepalanthus subgenus Platycaylon were studied, being 10 taxa of sect. Divisi and seven of sect. Conferti. The study was carried out to see whether scape morphology and anatomy provide valid taxonomic characters at the subgeneric level in Paepalanthus and to lest a proposal to recognize two sections within Paepalanthus subgenus Platycaylon: sect. Divisi and sect. Conferti. The material for anatomical study was collected in Brazil, partly from herbarium specimens and partly from fresh material collected in the field, from the Serra do Cipó. Minas Gerais State. In this work, we observe that

A cross-sectional study to assess the patient safety culture in the Palestinian hospitals: a baseline assessment for quality improvement.

Science.gov (United States)

Elsous, Aymen; Akbari Sari, Ali; Rashidian, Arash; Aljeesh, Yousef; Radwan, Mahmoud; AbuZaydeh, Hatem

2016-12-01

To measure and establish a baseline assessment of the patient safety culture in the Palestinian hospitals. A cross-sectional descriptive study using the Arabic version of the Safety Attitude Questionnaire (Short Form 2006). A total of 339 nurses and physicians returned the questionnaire out of 370 achieving a response rate of 91.6%. Four public general hospitals in the Gaza Strip, Palestine. Nurses and physicians were randomly selected using a proportionate random sampling. Data analysis performed using Statistical Package for the Social Sciences software version 20, and p value less than 0.05 was statistically significant. Current status of patient safety culture among healthcare providers and percentage of positive attitudes. Male to female ratio was 2.16:1, and mean age was 36.5 ± 9.4 years. The mean score of Arabic Safety Attitude Questionnaire across the six dimensions on 100-point scale ranged between 68.5 for Job Satisfaction and 48.5 for Working Condition. The percentage of respondents holding a positive attitude was 34.5% for Teamwork Climate, 28.4% for Safety Climate, 40.7% for Stress Recognition, 48.8% for Job Satisfaction, 11.3% for Working Conditions and 42.8% for Perception of Management. Healthcare workers holding positive attitudes had better collaboration with co-workers than those without positive attitudes. Findings are useful to formulate a policy on patient safety culture and targeted a specific safety culture dimension to improve the safety of patients and improve the clinical outcomes within healthcare organisations.

H. W. Laboratory manual: 100 Area section

Energy Technology Data Exchange (ETDEWEB)

1950-07-01

The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance for injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.

14 CFR 1260.37 - Safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Safety. 1260.37 Section 1260.37 Aeronautics... Provisions § 1260.37 Safety. Safety October 2000 (a) The Recipient shall act responsibly in matters of safety and shall take all reasonable safety measures in performing under this grant or cooperative agreement...

Perceived organizational support for safety and employee safety voice: the mediating role of coworker support for safety.

Science.gov (United States)

Tucker, Sean; Chmiel, Nik; Turner, Nick; Hershcovis, M Sandy; Stride, Chris B

2008-10-01

In the present study, we modeled 2 sources of safety support (perceived organizational support for safety and perceived coworker support for safety) as predictors of employee safety voice, that is, speaking out in an attempt to change unsafe working conditions. Drawing on social exchange and social impact theories, we hypothesized and tested a mediated model predicting employee safety voice using a cross-sectional survey of urban bus drivers (n = 213) in the United Kingdom. Hierarchical regression analysis showed that perceived coworker support for safety fully mediated the relationship between perceived organizational support for safety and employee safety voice. This study adds to the employee voice literature by evaluating the important role that coworkers can play in encouraging others to speak out about safety issues. Implications for research and practice related to change-oriented safety communication are discussed.

Centaurea inexpugnabilis, a new species from section Acrocentron for the Iberian flora

Directory of Open Access Journals (Sweden)

P. P. Ferrer-Gallego

2017-01-01

Full Text Available A new species for the genus Centaurea L. (sect. Acrocentron, Asteraceae is described: C. inexpugnabilis, sp. nov. This plant has been found in the Mallos de Riglos (Riglos, Huesca, Spain, and its distribution is currently limited to the northeastern of the Iberian Peninsula. A description and diagnosis, iconography and several tables showing the main diagnostic characters to differentiate it from its related species is reported.

Documentation of pediatric drug safety in manufacturers' product monographs: a cross-sectional evaluation of the canadian compendium of pharmaceuticals and specialities.

Science.gov (United States)

Uppal, Navjeet K; Dupuis, Lee L; Parshuram, Christopher S

2008-01-01

To describe the provision of pediatric drug safety information in a national formulary of manufacturers' drug product monographs. We performed a cross-sectional evaluation of comprehensive product monographs contained in the 2005 Canadian Compendium of Pharmaceuticals and Specialities (CPS). We abstracted data describing indications for prescription, statements about pediatric safety, available preparations, and provision of dosing guidelines. For each monograph we classified pediatric safety data as either present, present but limited or absent. We then described the pediatric safety data in CPS monographs for drugs listed in the published formulary of the Hospital for Sick Children, Toronto, Ontario, Canada. A total of 2232 product monographs were screened; 684 were excluded and 1548 (66%) were further analyzed. 1462 (94%) had indications that did not exclude children. Pediatric safety information was present in 592 (38%), present but limited in 148 (10%), and absent in 808 (52%) drug monographs. Safety statements were absent in 224 (14%) drug monographs that provided both dosing guidelines and formulations suitable for administration to children, and in 214 (52%) of 411 drugs in the pediatric hospital formulary. We evaluated a widely available national source of pediatric prescribing information. Safety data for children was not mentioned in more than half of the product monographs. Moreover, the provision of safety data was discordant with indications for prescription, the availability of pediatric formulations, and dosing guidelines within the monographs, and with inclusion in a pediatric hospital formulary. Our study suggests that the presentation of pediatric safety data in drug product monographs can be improved to better inform prescribing and to optimize pharmacotherapy in children.

14 CFR 417.109 - Ground safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 417.109 Section 417.109... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.109 Ground safety. (a) Ground safety... 417.115(c), and subpart E of this part provide launch operator ground safety requirements. ...

Safety of Nuclear Power Plants: Commissioning and Operation

International Nuclear Information System (INIS)

2011-01-01

publication deals with the safe commissioning and operation of a nuclear power plant. It covers commissioning and operation up to the removal of nuclear fuel from the plant, including maintenance and modifications made throughout the lifetime of the plant. It covers the preparation for decommissioning but not the decommissioning phase itself. The publication also establishes additional requirements relating only to commissioning. Normal operation and anticipated operational occurrences as well as accident conditions are taken into account. This publication follows the relationship between principles and objectives for safety, and safety requirements and criteria. Section 2 elaborates on the safety objective and safety principles, which form the basis for deriving the safety requirements that must be met in the operation of a nuclear power plant. Sections 3-9 establish safety requirements under a series of individually numbered overarching requirements. Section 3 establishes the requirements to be applied for the management and organizational structure of the operating organization. Section 4 establishes the requirements for the management of operational safety, while Section 5 establishes the requirements for operational safety programmes. Section 6 establishes the requirements for plant commissioning. Section 7 establishes the requirements for plant operations. Section 8 establishes the requirements for maintenance, testing, surveillance and inspection. Section 9 establishes the requirements for preparation for decommissioning. The requirements are mainly applicable to water cooled reactors, but they may also be used as a basis for establishing specific requirements for other reactor designs.

Safety at your service

CERN Multimedia

Antonella Del Rosso

2014-01-01

You might think that only twelve people to man twelve different services, each needing several people could be a problem. Not for the DGS-SEE-SV Section! We can now reveal their magic formula.   From risk management to prevention and follow-up of accidents, from safety training to hunting for pollutants in buildings and providing safety input for calls for tenders, the DGS-SEE-SV’s services underpin virtually every aspect of CERN’s daily life. “The section was set up in 2011 to meet the Organization's needs more effectively", explains François Angerand, head of the DGS-SEE-SV section. "For some activities, such as providing safety input for calls for tenders, our Section acts as an interface between the Departments and all the other services of the HSE Unit. In other cases, we ourselves provide direct support to the Departments.” “Safety” is synonymous with “prevention”: the DGS-...

9 CFR 113.33 - Mouse safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Mouse safety tests. 113.33 Section 113.33 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE... Procedures § 113.33 Mouse safety tests. One of the mouse safety tests provided in this section shall be...

Taxonomic changes in Oenothera sections Gaura and Calylophus (Onagraceae)

OpenAIRE

Wagner,Warren; Krakos,Kyra; Hoch,Peter C.

2013-01-01

Abstract The long-recognized genus Gaura was shown recently to be deeply nested within one of two major clades of Oenothera. New molecular data indicate further taxonomic changes are necessary in Oenothera sect. Gaura. We make these changes here, including three new combinations, in advance of the Onagraceae treatment for the Flora of North America. The new phylogenetic studies show that several pairs of taxa treated as subspecies in the most recent revision by Raven and Gregory (1972) had in...

All aboard the Safety Train(ing)!

CERN Multimedia

Rosaria Marraffino

2015-01-01

Would you like to influence CERN’s safety courses? Do you want to help build better training courses? If your answer is yes to one or both of these questions: now is the time! The Safety Training section is looking for volunteers from the whole CERN community to test new courses before they go online for all members of the personnel.    The Safety Training section is redesigning the CERN e-learning package in order to adopt a more educational approach and to make the courses a more enjoyable experience. The section is now calling for volunteers. “We know we can do much more with testers’ help and feedback,” explains Christoph Balle, Safety Training section leader. “By having the end users actively involved in the process, we’ll achieve our goal of communicating safety in the best possible way. As the volunteers will play an active role in the development of the courses, they will be providing a service to the whole community.&am...

Safety assessment for facilities and activities. General safety requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews;(i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews; (i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2010-01-01

) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews; (i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived from the

Safety Assessment for Facilities and Activities. General Safety Requirements. Pt. 4

International Nuclear Information System (INIS)

2009-01-01

installed; (i) Facilities where the mining and processing of radioactive ores (such as ores of uranium and thorium) are carried out. 'Activities' includes: (a) production, use, import and export of radiation sources for industrial, research, medical and other purposes; (b) transport of radioactive material; (c) decommissioning and dismantling of facilities and the closure of repositories for radioactive waste; (d) close-out of facilities where the mining and processing of radioactive ore was carried out; (e) activities for radioactive waste management such as the discharge of effluents; (f) remediation of sites affected by residues from past activities. Safety assessment plays an important role throughout the lifetime of the facility or activity whenever decisions on safety issues are made by the designers, the constructors, the manufacturers, the operating organization or the regulatory body. Stages in the lifetime of a facility or activity where a safety assessment is carried out, updated and used by the designers, the operating organization and the regulatory body include: (a) site evaluation for the facility or activity; (b) development of the design; (c) construction of the facility or implementation of the activity; (d) commissioning of the facility or activity; (e) commencement of operation of the facility or conduct of the activity; (f) normal operation of the facility or normal conduct of the activity; (g) modification of the design or operation; (h) periodic safety reviews;(i) life extension of the facility beyond its original design life; (j) changes in ownership or management of the facility; (k) decommissioning and dismantling of a facility; (l) closure of a repository for the disposal of radioactive waste and the post-closure phase; (m) remediation of a site and release from regulatory control. The publication is structured as follows: An introduction is followed by Section 2 which provides the basis for requiring a safety assessment to be carried out, derived

14 CFR 417.107 - Flight safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 417.107 Section 417.107... TRANSPORTATION LICENSING LAUNCH SAFETY Launch Safety Responsibilities § 417.107 Flight safety. (a) Flight safety... safety system that satisfies subpart D of this part as follows, unless § 417.125 applies. (1) In the...

9 CFR 113.40 - Dog safety tests.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Dog safety tests. 113.40 Section 113... Procedures § 113.40 Dog safety tests. The safety tests provided in this section shall be conducted when... recommended for use in dogs. Serials which are not found to be satisfactory when tested pursuant to the...

Self-reported confidence in patient safety knowledge among Australian undergraduate nursing students: A multi-site cross-sectional survey study.

Science.gov (United States)

Usher, Kim; Woods, Cindy; Parmenter, Glenda; Hutchinson, Marie; Mannix, Judy; Power, Tamara; Chaboyer, Wendy; Latimer, Sharon; Mills, Jane; Siegloff, Lesley; Jackson, Debra

2017-06-01

Patient safety is critical to the provision of quality health care and thus is an essential component of nurse education. To describe first, second and third year Australian undergraduate nursing students' confidence in patient safety knowledge acquired in the classroom and clinical settings across the three years of the undergraduate nursing program. A cross-sectional online survey conducted in 2015. Seven Australian universities with campuses across three states (Queensland, New South Wales, South Australia). A total of 1319 Australian undergraduate nursing students. Participants were surveyed using the 31-item Health Professional Education in Patient Safety Survey (H-PEPSS). Descriptive statistics summarised the sample and survey responses. Paired t-tests, ANOVA and generalized-estimating-equations models were used to compare responses across learning settings (classroom and clinical), and year of nursing course. Participants were most confident in their learning of clinical safety skills and least confident in learning about the sociocultural dimensions of working in teams with other health professionals, managing safety risks and understanding human and environmental factors. Only 59% of students felt confident they could approach someone engaging in unsafe practice, 75% of students agreed it was difficult to question the decisions or actions of those with more authority, and 78% were concerned they would face disciplinary action if they made a serious error. One patient safety subscale, Recognising and responding to remove immediate safety risks, was rated significantly higher by third year nursing students than by first and second year students. Two broader aspects of patient safety scales, Consistency in how patient safety issues are dealt with by different preceptors, and System aspects of patient safety are well covered in our program, were rated significantly higher by first year nursing students than by second and third year students. One scale

The strong CP problem and the visibility of invisible axions

International Nuclear Information System (INIS)

Buchmueller, W.

1986-12-01

The main subject of these lectures are general properties of axions and recent suggestions of how to detect invisible axions. After a brief review of the strong CP problem and the Peccei-Quinn mechanism in sects. 2 and 3, we discuss axion properties by means of an effective lagrangian approach in sect. 4. Experimental bounds on axion production and decays are reviewed in sect. 5. Sect. 6 deals briefly with the recently proposed variant axion models, and in sect. 7 we discuss the possible relevance of supersymmetry to the strong CP problem. In sect. 8 we then review the different proposals for the detection of invisible axions. Some conclusions are given in sect. 9. (orig./HSI)

Nurse perceptions of safety climate in Australian acute hospitals: a cross-sectional survey.

Science.gov (United States)

Soh, Sze-Ee; Morello, Renata; Rifat, Sheral; Brand, Caroline; Barker, Anna

2017-03-16

Objectives The aim of the present study was to explore nurse perceptions of safety climate in acute Australian hospitals. Methods Participants included 420 nurses who have worked on 24 acute wards from six Australian hospitals. The Safety Attitudes Questionnaire (SAQ) Short Form was used to quantify nurse perceptions of safety climate and benchmarked against international data. Generalised linear mixed models were used to explore factors that may influence safety climate. Results On average, 53.5% of nurses held positive attitudes towards job satisfaction followed by teamwork climate (50.5%). There was variability in SAQ domain scores across hospitals. The safety climate and perceptions of hospital management domains also varied across wards within a hospital. Nurses who had worked longer at a hospital were more likely to have poorer perceptions of hospital management (β=-5.2; P=0.014). Overall, nurse perceptions of safety climate appeared higher than international data. Conclusions The perceptions of nurses working in acute Victorian and New South Wales hospitals varied between hospitals as well as across wards within each hospital. This highlights the importance of surveying all hospital wards and examining the results at the ward level when implementing strategies to improve patient safety and the culture of safety in organisations. What is known about the topic? Prior studies in American nursing samples have shown that hospitals with higher levels of safety climate have a lower relative incidence of preventable patient complications and adverse events. Developing a culture of safety in hospitals may be useful in targeting efforts to improve patient safety. What does this paper add? This paper has shown that the perceptions of safety climate among nurses working in acute Australian hospitals varied between hospitals and across wards within a hospital. Only half the nurses also reported positive attitudes towards job satisfaction and teamwork climate. What are

Multidimensional measurement by using 3-D PMD sensors

Directory of Open Access Journals (Sweden)

T. Ringbeck

2007-06-01

Full Text Available Optical Time-of-Flight measurement gives the possibility to enhance 2-D sensors by adding a third dimension using the PMD principle. Various applications in the automotive (e.g. pedestrian safety, industrial, robotics and multimedia fields require robust three-dimensional data (Schwarte et al., 2000. These applications, however, all have different requirements in terms of resolution, speed, distance and target characteristics. PMDTechnologies has developed 3-D sensors based on standard CMOS processes that can provide an optimized solution for a wide field of applications combined with high integration and cost-effective production. These sensors are realized in various layout formats from single pixel solutions for basic applications to low, middle and high resolution matrices for applications requiring more detailed data. Pixel pitches ranging from 10 micrometer up to a 300 micrometer or larger can be realized and give the opportunity to optimize the sensor chip depending on the application.

One aspect of all optical sensors based on a time-of-flight principle is the necessity of handling background illumination. This can be achieved by various techniques, such as optical filters and active circuits on chip. The sensors' usage of the in-pixel so-called SBI-circuitry (suppression of background illumination makes it even possible to overcome the effects of bright ambient light. This paper focuses on this technical requirement. In Sect. 2 we will roughly describe the basic operation principle of PMD sensors. The technical challenges related to the system characteristics of an active optical ranging technique are described in Sect. 3, technical solutions and measurement results are then presented in Sect. 4. We finish this work with an overview of actual PMD sensors and their key parameters (Sect. 5 and some concluding remarks in Sect. 6.

33 CFR 165.20 - Safety zones.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zones. 165.20 Section 165... WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Safety Zones § 165.20 Safety zones. A Safety Zone is a water area, shore area, or water and shore area to which, for safety or environmental...

49 CFR 229.109 - Safety valves.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety valves. 229.109 Section 229.109..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.109 Safety valves. Every steam generator shall be equipped with at least two safety valves that have a...

Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

Energy Technology Data Exchange (ETDEWEB)

Chester, R.O.; Roberts, D.A.

1981-08-01

Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names.

Student research activities in the Technology Assessments Section of the Health and Safety Research Division, Summer 1980

International Nuclear Information System (INIS)

Chester, R.O.; Roberts, D.A.

1981-08-01

Reports summarizing activities of students assigned to the Technology Assessments Section of the Health and Safety Research Division for the summer 1980 are presented. Unless indicated otherwise, each report was written by the student whose work is being described. For each student, the student's supervisor, the name of the program under which the student was brought to ORNL, the academic level of the student, and the name of the ORNL project to which the student was assigned are tabulated. The reports are presented in alphabetical order of the students' last names

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-01-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross- sectional study was conducted among 160 non- industrial welding workers in Udupi district. A pre-structured interviewer-administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Occupational injuries and safety measures adopted by welding workers: a cross sectional study in South India

Directory of Open Access Journals (Sweden)

Bhumika.T.V.

2014-09-01

Full Text Available Background Welders have been identified as a high risk group according to ranking of occupations based on cost related injuries. Employment of safety measures and practices among welders are potential ways of preventing occupational injuries. Adherence to these precautions is nearly universal in the developed world but there is scarcity of information about the situation in developing world including India. Objectives 1 To estimate the prevalence of occupational injuries among welding workers in Udupi district; 2 To assess the perception towards occupational hazards and the safety measures adopted by the welders Material and Methods A cross--‐ sectional study was conducted among 160 non--‐ industrial welding workers in Udupi district. A pre--‐structured interviewer--‐administered questionnaire was used. Results The prevalence of occupational injuries was found to be 80%. Only 24.4% of the welders had undergone professional training. Though 95% of them were aware of the importance of personal protective equipments (PPE, only 37.5% of them were regularly using PPE. Majority (75% of them reported that welding profession was dangerous. Around 79% of the workers reported carelessness being the major cause of injury during work. Working hours of less than 8 hours in a day, reading of safety manual and maintenance of equipments were significantly positively associated with occupational injuries among welding workers. Conclusion Occupational injuries during welding are preventable. The level of experience, training and attitude while working can reduce the injuries to large extent.

Morphology of seeds and seedlings of four species of Vigna Savi (Leguminosae, Phaseolinae

Directory of Open Access Journals (Sweden)

Fabiana Soledad Ojeda

2013-09-01

Full Text Available Four neotropical species of Vigna Savi (Leguminosae, Phaseolinae have potential value as forage crops or ornamentals and could be cultivated in tropical or subtropical areas, even on floodplains. In order to obtain useful data for their culture and taxonomy, the seed morphology, germination pattern (hypogeal or epigeal and seedling development were studied. The studied species belong to different sections of the genus: V. adenantha (G.F.W. Meyer Maréchal, Mascherpa & Stainier (Sect. Leptospron; V. candida (Vell. Maréchal, Mascherpa & Stainier (Sect. Sigmoidotropis; V. caracalla (L. Verdc. (Sect. Caracallae and V. luteola (Jacq. Benth. (Sect. Vigna. The seeds were collected during fieldwork conducted in northwestern and northeastern Argentina. The qualitative and quantitative characters of the seeds were registered, after which they were sown. The development of the emerged seedlings was followed, first in a greenhouse and thereafter in open field. We recorded the type of germination, the thigmotropic movements of the hypocotyl and of the stem, seedling architecture and plant longevity. These traits allowed us to differentiate the species and construct an identification key that could be useful for agronomic or floricultural purposes. The data obtained partially support the current taxonomic treatment of the genus.

Teorías sobre la clasificación taxonómica de las papas cultivadas (Solanum L. sect. Petota Dumort.. Una revisión

Directory of Open Access Journals (Sweden)

Rodríguez Luis Ernesto

2009-12-01

Full Text Available

La presente revisión busca reunir diferentes propuestas utilizadas para clasificar las papas cultivadas y sus parientes silvestres (Solanum L. sect. Petota Dumort., ya que históricamente se han presentado diferencias entre los taxónomos que han estudiado su clasificación. A la fecha no hay consenso, debido a que el límite entre especies no está definido, y las interrelaciones entre estas son frecuentes. Es importante generar una propuesta definitiva, coherente y práctica, que genere un consenso en la taxonomía de la papa. Esto permitiría conocer el número real de especies, el límite entre ellas y sus interrelaciones y continuos cambios. A su vez, esta información deberá facilitar un mejor aprovechamiento del germoplasma por parte de los programas de mejoramiento genético.

49 CFR 238.230 - Safety appliances-new equipment.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-new equipment. 238.230 Section... I Passenger Equipment § 238.230 Safety appliances—new equipment. (a) Applicability. This section..., 2007, that is equipped with a safety appliance, required by the “manner of application” provisions in...

14 CFR 27.1413 - Safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 27.1413 Section 27.1413 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: NORMAL CATEGORY ROTORCRAFT Equipment Safety Equipment § 27.1413 Safety belts. Each safety belt...

Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned

New penicillin-producing Penicillium species and an overview of section Chrysogena

DEFF Research Database (Denmark)

Houbraken, J.; Frisvad, Jens Christian; Seifert, K. A.

2012-01-01

Species classified in Penicillium sect. Chrysogena are primary soil-borne and the most well-known members are P. chrysogenum and P. nalgiovense. Penicillium chrysogenum has received much attention because of its role in the production on penicillin and as a contaminant of indoor environments....... Each species produces a unique extrolite profile. The species share phenotypic characters, such as good growth on CYA supplemented with 5 % NaCl, ter- or quarterverticillate branched conidiophores and short, ampulliform phialides (colours, production of ascomata and ascospores, shape...

Basic legal provisions concerning the activities of industrial security personnel

International Nuclear Information System (INIS)

Eberstein, H.H.

1980-01-01

The author confines himself to sabotage and espionage. Necessary counter-measures are determined by the respective type of activities. Sect. 618 of the German Civil Code and Sect. 120 a of the Industrial Code give basic legal provisions for the protection of industrial personnel. The legal position held by owner or occupant forms the legal basis for 'vulnerable point protection'. The owner's rights are assigned to the industrial police and are exercised in correspondence with the service or employment contract set up according to Sect. 611 and the following sections of the German Civil Code. Outside guards work according to the performance contract given int the Sections 675, 611, 631 of the German Civil Code. The security personnel has the common right of self-help: self-defence, civil rights concerning the state of national emergency and self-defence under criminal law, rights derived from ownership and property. The author critically argues views held by Mr. Hoffmann-Riem who thinks that police powers have been assigned to private persons. He definitely answers in the negative to the execution of, or encroachment on, sovereign (police) powers by industrial security personnel. A special legal regulation is not necessary, since private protection in form of professional selfdefence is admissible under the law in force. (HSCH) [de

10 CFR 830.202 - Safety basis.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety basis. 830.202 Section 830.202 Energy DEPARTMENT OF ENERGY NUCLEAR SAFETY MANAGEMENT Safety Basis Requirements § 830.202 Safety basis. (a) The contractor responsible for a hazard category 1, 2, or 3 DOE nuclear facility must establish and maintain the safety basis...

9 CFR 113.38 - Guinea pig safety test.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Guinea pig safety test. 113.38 Section... Standard Procedures § 113.38 Guinea pig safety test. The guinea pig safety test provided in this section... be injected either intramuscularly or subcutaneously into each of two guinea pigs and the animals...

Influence of parental perception of school safety and gender on children’s physical activity in Mexico: A cross sectional study

Directory of Open Access Journals (Sweden)

Amy Hutchens

2016-01-01

Full Text Available Objective. This cross sectional study aims to determine the effects of gender and parental perception of safety at school on children’s physical activity (PA levels. Materials and methods. Parents of school aged Mexican children residing in Guadalajara, Mexico City, and Puerto Vallarta, completed surveys about their children’s PA measures. The physical activity indicators were evaluated using linear and logistical regression models. Results. Analysis did not indicate that gender moderated the relationship between parental perception of safety and PA measures, but significant gender issues exist with girls participating less than boys in the three measures of PA in this study (p<0.001. Conclusion. Results suggest the need for additional interventions promoting physical activity in girls in Mexico.

Pemikiran Epistemologi Barat: dari Plato Sampai Gonseth

OpenAIRE

Nunu Burhanuddin

2015-01-01

This paper riviewing the Western epistemology thought. The theme focuses on Plato to Gonseth. The Epistemology that referred in this article, is to think about "how humans acquire knowledge?". From this then appear four types of sect modern western epistemology thought, namely: sect of empiricism, rationalism sect, kantinian sect, sect of positivism. Furthermore, the social positivism sciences developed by Comte leaves serious problems associated with the loss of the role of the subject. This...

A survey of xerophilic Aspergillus from indoor environment, including descriptions of two new section Aspergillus species producing eurotium-like sexual states

DEFF Research Database (Denmark)

Visagie, Cobus M.; Yilmaz, Neriman; Renaud, Justin B.

2017-01-01

of 1039 strains; 296 strains belong to Aspergillus and represented 37 species. Reference sequences were generated for all species and deposited in GenBank. Aspergillus sect. Aspergillus (formerly called Eurotium) was one of the most predominant groups from house dust with nine species identified...

50 CFR 25.71 - Public safety.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Public safety. 25.71 Section 25.71... NATIONAL WILDLIFE REFUGE SYSTEM ADMINISTRATIVE PROVISIONS Safety Regulations § 25.71 Public safety. Persons using national wildlife refuges shall comply with the safety requirements which are established under...

49 CFR 238.103 - Fire safety.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Fire safety. 238.103 Section 238.103..., DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Safety Planning and General Requirements § 238.103 Fire safety. (a) Materials. (1) Materials used in constructing a passenger car or a cab of a...

Transportation and packaging resource guide

Energy Technology Data Exchange (ETDEWEB)

Arendt, J.W.; Gove, R.M.; Welch, M.J.

1994-12-01

The purpose of this resource guide is to provide a convenient reference document of information that may be useful to the U.S. Department of Energy (DOE) and DOE contractor personnel involved in packaging and transportation activities. An attempt has been made to present the terminology of DOE community usage as it currently exists. DOE`s mission is changing with emphasis on environmental cleanup. The terminology or nomenclature that has resulted from this expanded mission is included for the packaging and transportation user for reference purposes. Older terms still in use during the transition have been maintained. The Packaging and Transportation Resource Guide consists of four sections: Sect. 1, Introduction; Sect. 2, Abbreviations and Acronyms; Sect. 3, Definitions; and Sect. 4, References for packaging and transportation of hazardous materials and related activities, and Appendices A and B. Information has been collected from DOE Orders and DOE documents; U.S Department of Transportation (DOT), U.S. Environmental Protection Agency (EPA), and U.S. Nuclear Regulatory Commission (NRC) regulations; and International Atomic Energy Agency (IAEA) standards and other international documents. The definitions included in this guide may not always be a regulatory definition but are the more common DOE usage. In addition, the definitions vary among regulatory agencies. It is, therefore, suggested that if a definition is to be used in a regulatory or a legal compliance issue, the definition should be verified with the appropriate regulation. To assist in locating definitions in the regulations, a listing of all definition sections in the regulations are included in Appendix B. In many instances, the appropriate regulatory reference is indicated in the right-hand margin.

Transportation and packaging resource guide

International Nuclear Information System (INIS)

Arendt, J.W.; Gove, R.M.; Welch, M.J.

1994-12-01

The purpose of this resource guide is to provide a convenient reference document of information that may be useful to the U.S. Department of Energy (DOE) and DOE contractor personnel involved in packaging and transportation activities. An attempt has been made to present the terminology of DOE community usage as it currently exists. DOE's mission is changing with emphasis on environmental cleanup. The terminology or nomenclature that has resulted from this expanded mission is included for the packaging and transportation user for reference purposes. Older terms still in use during the transition have been maintained. The Packaging and Transportation Resource Guide consists of four sections: Sect. 1, Introduction; Sect. 2, Abbreviations and Acronyms; Sect. 3, Definitions; and Sect. 4, References for packaging and transportation of hazardous materials and related activities, and Appendices A and B. Information has been collected from DOE Orders and DOE documents; U.S Department of Transportation (DOT), U.S. Environmental Protection Agency (EPA), and U.S. Nuclear Regulatory Commission (NRC) regulations; and International Atomic Energy Agency (IAEA) standards and other international documents. The definitions included in this guide may not always be a regulatory definition but are the more common DOE usage. In addition, the definitions vary among regulatory agencies. It is, therefore, suggested that if a definition is to be used in a regulatory or a legal compliance issue, the definition should be verified with the appropriate regulation. To assist in locating definitions in the regulations, a listing of all definition sections in the regulations are included in Appendix B. In many instances, the appropriate regulatory reference is indicated in the right-hand margin

Idaho Safety Manual.

Science.gov (United States)

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This manual is intended to help teachers, administrators, and local school boards develop and institute effective safety education as a part of all vocational instruction in the public schools of Idaho. This guide is organized in 13 sections that cover the following topics: introduction to safety education, legislation, levels of responsibility,…

20 CFR 638.803 - Safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Safety. 638.803 Section 638.803 Employees... THE JOB TRAINING PARTNERSHIP ACT Administrative Provisions § 638.803 Safety. (a) The Job Corps... shall be assigned to such jobs or training in accordance with appropriate health and safety practices...

Nuclear Safety Review 2013

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-07-15

The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis.

Nuclear Safety Review 2013

International Nuclear Information System (INIS)

2013-07-01

The Nuclear Safety Review 2013 focuses on the dominant nuclear safety trends, issues and challenges in 2012. The Executive Overview provides crosscutting and worldwide nuclear safety information along with a summary of the major sections covered in this report. Sections A-E of this report cover improving radiation, transport and waste safety; strengthening safety in nuclear installations; improving regulatory infrastructure and effectiveness; enhancing emergency preparedness and response (EPR); and civil liability for nuclear damage. The Appendix provides details on the activities of the Commission on Safety Standards (CSS), and activities relevant to the IAEA Safety Standards. The world nuclear community has made noteworthy progress in strengthening nuclear safety in 2012, as promoted by the IAEA Action Plan on Nuclear Safety (hereinafter referred to as ''the Action Plan''). For example, an overwhelming majority of Member States with operating nuclear power plants (NPPs) have undertaken and essentially completed comprehensive safety reassessments ('stress tests') with the aim of evaluating the design and safety aspects of plant robustness to protect against extreme events, including: defence in depth, safety margins, cliff edge effects, multiple failures, and the prolonged loss of support systems. As a result, many have introduced additional safety measures including mitigation of station blackout. Moreover, the IAEA's peer review services and safety standards have been reviewed and strengthened where needed. Capacity building programmes have been built or improved, and EPR programmes have also been reviewed and improved. Furthermore, in 2012, the IAEA continued to share lessons learned from the Fukushima Daiichi accident with the nuclear community including through three international experts' meetings (IEMs) on reactor and spent fuel safety, communication in the event of a nuclear or radiological emergency, and protection against extreme earthquakes and tsunamis

49 CFR 385.107 - The safety audit.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false The safety audit. 385.107 Section 385.107 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES Safety Monitoring System for Mexico-Domicile...

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2001-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

The operating organization for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA programme for safety standards for nuclear power plants. The present publication is a revision of the IAEA Safety Guide on Management of Nuclear Power Plants for Safe Operation issued in 1984. It supplements Section 2 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation. Nuclear power technology is different from the customary technology of power generation from fossil fuel and by hydroelectric means. One major difference between the management of nuclear power plants and that of conventional generating plants is the emphasis that should be placed on nuclear safety, quality assurance, the management of radioactive waste and radiological protection, and the accompanying national regulatory requirements. This Safety Guide highlights the important elements of effective management in relation to these aspects of safety. The attention to be paid to safety requires that the management recognize that personnel involved in the nuclear power programme should understand, respond effectively to, and continuously search for ways to enhance safety in the light of any additional requirements socially and legally demanded of nuclear energy. This will help to ensure that safety policies that result in the safe operation of nuclear power plants are implemented and that margins of safety are always maintained. The structure of the organization, management standards and administrative controls should be such that there is a high degree of assurance that safety policies and decisions are implemented, safety is continuously enhanced and a strong safety culture is promoted and supported. The objective of this publication is to guide Member States in setting up an operating organization which facilitates the safe operation of nuclear power plants to a high level internationally. The second objective is to provide guidance on the most important organizational elements in order to contribute to a strong safety

ANALYSIS ON THE INFLUENCE OF ACCUMULATION EFFECT OF LANDSCAPE COLOR ON TRAFFIC SAFETY IN THE FOGGY SECTIONS OF EXPRESSWAYS

OpenAIRE

Xilei Li; Boming Tang; Qianghui Song

2017-01-01

The landscape color of expressways has a significant impact on a driver's visual response, thus affecting the incidence of expressways traffic accidents. Although this problem has been analyzed and discussed from different angles, there is rare quantitative analysis on the influence of accumulation effect of landscape color on the traffic safety in foggy sections of expressways. In this paper, the color combination and stroboflash of fog lamps on both sides of the road were designed from the ...

14 CFR 415.117 - Ground safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Ground safety. 415.117 Section 415.117... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch of an Expendable Launch Vehicle From a Non-Federal Launch Site § 415.117 Ground safety. (a) General. An applicant's safety review...

14 CFR 415.115 - Flight safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Flight safety. 415.115 Section 415.115... TRANSPORTATION LICENSING LAUNCH LICENSE Safety Review and Approval for Launch of an Expendable Launch Vehicle From a Non-Federal Launch Site § 415.115 Flight safety. (a) Flight safety analysis. An applicant's...

Phylogenetic Analysis of a 'Jewel Orchid' Genus Goodyera (Orchidaceae) Based on DNA Sequence Data from Nuclear and Plastid Regions.

Science.gov (United States)

Hu, Chao; Tian, Huaizhen; Li, Hongqing; Hu, Aiqun; Xing, Fuwu; Bhattacharjee, Avishek; Hsu, Tianchuan; Kumar, Pankaj; Chung, Shihwen

2016-01-01

A molecular phylogeny of Asiatic species of Goodyera (Orchidaceae, Cranichideae, Goodyerinae) based on the nuclear ribosomal internal transcribed spacer (ITS) region and two chloroplast loci (matK and trnL-F) was presented. Thirty-five species represented by 132 samples of Goodyera were analyzed, along with other 27 genera/48 species, using Pterostylis longifolia and Chloraea gaudichaudii as outgroups. Bayesian inference, maximum parsimony and maximum likelihood methods were used to reveal the intrageneric relationships of Goodyera and its intergeneric relationships to related genera. The results indicate that: 1) Goodyera is not monophyletic; 2) Goodyera could be divided into four sections, viz., Goodyera, Otosepalum, Reticulum and a new section; 3) sect. Reticulum can be further divided into two subsections, viz., Reticulum and Foliosum, whereas sect. Goodyera can in turn be divided into subsections Goodyera and a new subsection.

Phylogenetic Analysis of a 'Jewel Orchid' Genus Goodyera (Orchidaceae Based on DNA Sequence Data from Nuclear and Plastid Regions.

Directory of Open Access Journals (Sweden)

Chao Hu

Full Text Available A molecular phylogeny of Asiatic species of Goodyera (Orchidaceae, Cranichideae, Goodyerinae based on the nuclear ribosomal internal transcribed spacer (ITS region and two chloroplast loci (matK and trnL-F was presented. Thirty-five species represented by 132 samples of Goodyera were analyzed, along with other 27 genera/48 species, using Pterostylis longifolia and Chloraea gaudichaudii as outgroups. Bayesian inference, maximum parsimony and maximum likelihood methods were used to reveal the intrageneric relationships of Goodyera and its intergeneric relationships to related genera. The results indicate that: 1 Goodyera is not monophyletic; 2 Goodyera could be divided into four sections, viz., Goodyera, Otosepalum, Reticulum and a new section; 3 sect. Reticulum can be further divided into two subsections, viz., Reticulum and Foliosum, whereas sect. Goodyera can in turn be divided into subsections Goodyera and a new subsection.

Phylogenetic Analysis of a ‘Jewel Orchid’ Genus Goodyera (Orchidaceae) Based on DNA Sequence Data from Nuclear and Plastid Regions

Science.gov (United States)

Hu, Chao; Tian, Huaizhen; Li, Hongqing; Hu, Aiqun; Xing, Fuwu; Bhattacharjee, Avishek; Hsu, Tianchuan; Kumar, Pankaj; Chung, Shihwen

2016-01-01

A molecular phylogeny of Asiatic species of Goodyera (Orchidaceae, Cranichideae, Goodyerinae) based on the nuclear ribosomal internal transcribed spacer (ITS) region and two chloroplast loci (matK and trnL-F) was presented. Thirty-five species represented by 132 samples of Goodyera were analyzed, along with other 27 genera/48 species, using Pterostylis longifolia and Chloraea gaudichaudii as outgroups. Bayesian inference, maximum parsimony and maximum likelihood methods were used to reveal the intrageneric relationships of Goodyera and its intergeneric relationships to related genera. The results indicate that: 1) Goodyera is not monophyletic; 2) Goodyera could be divided into four sections, viz., Goodyera, Otosepalum, Reticulum and a new section; 3) sect. Reticulum can be further divided into two subsections, viz., Reticulum and Foliosum, whereas sect. Goodyera can in turn be divided into subsections Goodyera and a new subsection. PMID:26927946

Safety Education in Driving. 2nd Revision.

Science.gov (United States)

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

Intended for driving instruction students, this publication contains instructional materials for safety education. It contains six sections on facts and figures; defensive driving; safety devices; restraints; emergency situations; and other highway users. Each section consists of reading material followed by an activity or activities. A total of…

21 CFR 610.11 - General safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false General safety. 610.11 Section 610.11 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS General Provisions § 610.11 General safety. A general safety test... for administration to humans. The general safety test is required in addition to other specific tests...

Defining safety culture and the nexus between safety goals and safety culture. 1. An Investigation Study on Practical Points of Safety Management

International Nuclear Information System (INIS)

Hasegawa, Naoko; Takano, Kenichi; Hirose, Ayako

2001-01-01

In a report after the Chernobyl accident, the International Atomic Energy Agency indicated the definition and the importance of safety culture and the ideal organizational state where safety culture pervades. However, the report did not mention practical approaches to enhance safety culture. In Japan, although there had been investigations that clarified the consciousness of employees and the organizational climate in the nuclear power and railway industries, organizational factors that clarified the level of organization safety and practical methods that spread safety culture in an organization had not been studied. The Central Research Institute of the Electric Power Industry conducted surveys of organizational culture for the construction, chemical, and manufacturing industries. The aim of our study was to clarify the organizational factors that influence safety in an organization expressed in employee safety consciousness, commitment to safety activities, rate of accidents, etc. If these areas were clarified, the level of organization safety might be evaluated, and practical ways could be suggested to enhance the safety culture. Consequently, a series of investigations was conducted to clarify relationships among organizational climate, employee consciousness, safety management and activities, and rate of accidents. The questionnaire surveys were conducted in 1998-1999. The subjects were (a) managers of the safety management sections in the head offices of the construction, chemical, and manufacturing industries; (b) responsible persons in factories of the chemical and manufacturing industries; and (c) general workers in factories of the chemical and manufacturing industries. The number of collected data was (a) managers in the head office: 48 from the construction industry and 58 from the chemical and manufacturing industries, (b) responsible persons in factories: 567, and (c) general workers: from 29 factories. Items in the questionnaires were selected from

16 CFR 1116.6 - Contents of section 37 reports.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Contents of section 37 reports. 1116.6 Section 1116.6 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT..., and the court in which the civil action was filed. (b) Optional information. A manufacturer furnishing...

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Science.gov (United States)

Sugimoto, Takashi; Shinozaki, Tomohiro; Naruse, Takashi; Miyamoto, Yuki

2014-01-01

Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. Many people were at least occasionally concerned about radiation (53.5%), food safety (47.3%), and about natural disaster (69.5%). Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06), food safety (1.70; 1.38-2.10), and natural disasters (1.74; 1.39-2.19). Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77), food safety (1.38; 1.20-1.59), and natural disasters (1.30; 1.12-1.52). Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74) and food safety (1.30; 1.07-1.59), which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety). Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Who was concerned about radiation, food safety, and natural disasters after the great East Japan earthquake and Fukushima catastrophe? A nationwide cross-sectional survey in 2012.

Directory of Open Access Journals (Sweden)

Takashi Sugimoto

Full Text Available BACKGROUND: Disaster-related concerns by sub-populations have not been clarified after the great East Japan earthquake and the Fukushima nuclear power plant incidents. This paper assesses who was concerned about radiation, food safety, and natural disasters among the general population in order to buffer such concerns effectively. METHODS: The hypothesis that women, parents, and family caregivers were most concerned about radiation, food safety, and natural disaster was tested using a varying-intercept multivariable logistic regression with 5809 responses from a nationwide cross-sectional survey random-sampled in March 2012. RESULTS: Many people were at least occasionally concerned about radiation (53.5%, food safety (47.3%, and about natural disaster (69.5%. Women were more concerned than men about radiation (OR = 1.67; 95% CI = 1.35-2.06, food safety (1.70; 1.38-2.10, and natural disasters (1.74; 1.39-2.19. Parents and family care needs were not significant. Married couples were more concerned about radiation (1.53; 1.33-1.77, food safety (1.38; 1.20-1.59, and natural disasters (1.30; 1.12-1.52. Age, child-cohabitation, college-completion, retirement status, homemaker status, and the house-damage certificate of the last disaster were also associated with at least one concern. Participants from the Kanto region were more concerned about radiation (2.08; 1.58-2.74 and food safety (1.30; 1.07-1.59, which demonstrate similar positive associations to participants from Tohoku where a disaster relief act was invoked (3.36; 2.25-5.01 about radiation, 1.49; 1.08-2.06 about food safety. CONCLUSIONS: Sectioning the populations by gender and other demographics will clarify prospective targets for interventions, allow for a better understanding of post-disaster concerns, and help communicate relevant information effectively.

Safety issues and their ranking for WWER-440 model 213 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-04-01

The objective of this report is to present a consolidated list of generic safety concerns, called safety issues, ranked according to their safety significance and the corrective measures to improve safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. Section 2 provides and overview of the impact of all relevant issues on the main safety functions and other aspects important to overall plant safety. Section 3 presents safety issues identified in design according to the structure described below. Section 4 presents the safety issues in the area of operation, according to the same structure except that no ranking is given. At the end of Section 2, Tables 1 and 2 present a summary of all safety issues in a tabular form. 138 refs, tabs

15 CFR 970.205 - Vessel safety.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Vessel safety. 970.205 Section 970.205... safety. In order to provide a basis for the necessary determinations with respect to the safety of life... Safety of Life at Sea, 1974 (SOLAS 74) possesses current valid SOLAS 74 certificates; (2) That any...

33 CFR 151.1512 - Vessel safety.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vessel safety. 151.1512 Section... River § 151.1512 Vessel safety. Nothing in this subpart relieves the master of the responsibility for ensuring the safety and stability of the vessel or the safety of the crew and passengers, or any other...

36 CFR 1004.15 - Safety belts.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Safety belts. 1004.15 Section 1004.15 Parks, Forests, and Public Property PRESIDIO TRUST VEHICLES AND TRAFFIC SAFETY § 1004.15 Safety... administered by the Presidio Trust will have the safety belt or child restraint system properly fastened at all...

33 CFR 147.847 - Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone.

Science.gov (United States)

2010-07-01

... Production, Storage, and Offloading System Safety Zone. 147.847 Section 147.847 Navigation and Navigable... ZONES § 147.847 Safety Zone; BW PIONEER Floating Production, Storage, and Offloading System Safety Zone. (a) Description. The BW PIONEER, a Floating Production, Storage and Offloading (FPSO) system, is in...

Screening of Chemical Composition, Antioxidant and Anticholinesterase Activity of Section Brevifilamentum of Origanum (L. Species

Directory of Open Access Journals (Sweden)

Hasibe Yılmaz

2017-09-01

Full Text Available Six Origanum species, Origanum acutidens (Hand. -Mazz. Ietsw. (OA, Origanum brevidens (Bornm. Dinsm. (OB, Origanum haussknechtii Boiss. (OC, Origanum husnucan-baseri H.Duman, Aytaç & A.Duran (OHB, Origanum leptocladum Boiss. (OL, Origanum rotundifolium Boiss. (OR, belonging to sect. Brevifilamentum were analyzed for their essential oil and phenolic components. For the essential oil analyses, GC-MS and GC-FID were used. Phenolic contents of the aerial parts of the chloroform, acetone, and methanol extracts were analyzed using LC-MS/MS. Antioxidant activity of the species was investigated by three methods; DPPH free radical scavenging activity, β-carotene linoleic acid assays and CUPRAC assays. Also, acetyl and butyrylcholinesterase inhibition of the extracts were investigated. While the essential oil contents of the section Brevifilamentum showed difference in chemotype, the phenolic contents were found to be coumaric acids and derivatives. These groups were the most abundant components of the extracts. Especially rosmarinic acid was detected in high amounts in acetone and methanol extracts. OA had the best activity both in antioxidant and anticholinesterase assays.

33 CFR 159.95 - Safety.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety. 159.95 Section 159.95... SANITATION DEVICES Design, Construction, and Testing § 159.95 Safety. (a) Each device must— (1) Be free of... explosion or over pressurization as a result of an accumulation of gases; and (3) Meet all other safety...

Template for safety reports with descriptive example

International Nuclear Information System (INIS)

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing 'descriptive examples' has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs

Template for safety reports with descriptive example

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

In-place cement stabilized base reconstruction techniques interim report : "construction and two year evaluation".

Science.gov (United States)

2002-08-01

The purpose of this research was to evaluate the effectiveness of soil cement shrinkage crack mitigation techniques. The contents of this report reflect an evaluation of the construction of the test sections and a two-year evaluation of the test sect...

36 CFR 4.15 - Safety belts.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Safety belts. 4.15 Section 4... TRAFFIC SAFETY § 4.15 Safety belts. (a) Each operator and passenger occupying any seating position of a motor vehicle in a park area will have the safety belt or child restraint system properly fastened at...

40 CFR 243.201 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 243.201 Section 243.201 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE STORAGE... Procedures § 243.201 Safety. ...

47 CFR 95.1125 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 95.1125 Section 95.1125 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PERSONAL RADIO SERVICES Wireless Medical Telemetry Service (WMTS) General Provisions § 95.1125 RF safety. Portable devices...

40 CFR 87.6 - Aircraft safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Aircraft safety. 87.6 Section 87.6... POLLUTION FROM AIRCRAFT AND AIRCRAFT ENGINES General Provisions § 87.6 Aircraft safety. The provisions of... met within the specified time without creating a safety hazard. ...

Fire safety of wood construction

Science.gov (United States)

Robert H. White; Mark A. Dietenberger

2010-01-01

Fire safety is an important concern in all types of construction. The high level of national concern for fire safety is reflected in limitations and design requirements in building codes. These code requirements and related fire performance data are discussed in the context of fire safety design and evaluation in the initial section of this chapter. Because basic data...

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-03-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking. 73 refs, 3 tabs

Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1997-04-01

The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking

Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

Modifications to nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2007-01-01

This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

Supplement to safety analysis report. 306-W building operations safety requirement

International Nuclear Information System (INIS)

Richey, C.R.

1979-08-01

The operations safety requirements (OSRs) presented in this report define the conditions, safe boundaries, and management control needed for safely conducting operations with radioactive materials in the Pacific Northwest Laboratory (PNL) 306-W building. The safety requirements are organized in five sections. Safety limits are safety-related process variables that are observable and measurable. Limiting conditions cover: equipment and technical conditions and characteristics of the facility and operations necessary for continued safe operation. Surveillance requirements prescribe the requirements for checking systems and components that are essential to safety. Equipment design controls require that changes to process equipment and systems be independently checked and approved to assure that the changes will have no adverse effect on safety. Administrative controls describe and discuss the organization and administrative systems and procedures to be used for safe operation of the facility. Details of the implementation of the operations safety requirements are prescribed by internal PNL documents such as criticality safety specifications and radiation work procedures

46 CFR 197.326 - Oxygen safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Oxygen safety. 197.326 Section 197.326 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE OCCUPATIONAL SAFETY AND HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations Equipment § 197.326 Oxygen safety. (a) Equipment used with...

47 CFR 90.1335 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 90.1335 Section 90.1335 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES PRIVATE LAND MOBILE RADIO SERVICES Wireless Broadband Services in the 3650-3700 MHz Band § 90.1335 RF safety...

29 CFR 1926.105 - Safety nets.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety nets. 1926.105 Section 1926.105 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Personal Protective and Life Saving Equipment § 1926.105...

Light water reactor safety

CERN Document Server

Pershagen, B

2013-01-01

This book describes the principles and practices of reactor safety as applied to the design, regulation and operation of light water reactors, combining a historical approach with an up-to-date account of the safety, technology and operating experience of both pressurized water reactors and boiling water reactors. The introductory chapters set out the basic facts upon which the safety of light water reactors depend. The central section is devoted to the methods and results of safety analysis. The accidents at Three Mile Island and Chernobyl are reviewed and their implications for light wate

Phylogeny of holoparasitic Orobanche (Orobanchaceae) inferred from nuclear ITS sequences.

Science.gov (United States)

Schneeweiss, Gerald M; Colwell, Alison; Park, Jeong-Mi; Jang, Chang-Gee; Stuessy, Tod F

2004-02-01

Orobanche is the largest genus among the holoparasitic members of Orobanchaceae. We present the first molecular phylogenetic analysis (using nuclear ITS sequences) that includes members of all sections of Orobanche, Gymnocaulis, Myzorrhiza, Trionychon, and Orobanche. Orobanche is not monophyletic, but falls into two lineages: (1) the Orobanche group comprises Orobanche sect. Orobanche and the small Near Asian genus Diphelypaea and is characterized by a chromosome base number of x=19 and (2) the Phelipanche group contains Orobanche sects. Gymnocaulis, Myzorrhiza, and Trionychon and possesses a chromosome base number of x=12. The relationships between these two groups and to other genera such as Boschniakia or Cistanche remain unresolved. Within the Orobanche group, Orobanche macrolepis and Orobanche anatolica (including Orobanche colorata) constitute two phylogenetically distinct lineages. Intrasectional structurings proposed by some authors for O. sect. Orobanche are not confirmed by the molecular data. In most cases, intraspecific sequence divergence between accessions, if present, is negligible and not correlated with morphological or ecological traits. In a few cases, however, there is evidence for the presence of cryptic taxa.

Phylogeny of holoparasitic Orobanche (Orobanchaceae) inferred from nuclear ITS sequences

Science.gov (United States)

Schneeweiss, G.M.; Colwell, A.; Park, J.-M.; Jang, C.-G.; Stuessy, Tod F.

2004-01-01

Orobanche is the largest genus among the holoparasitic members of Orobanchaceae. We present the first molecular phylogenetic analysis (using nuclear ITS sequences) that includes members of all sections of Orobanche, Gymnocaulis, Myzorrhiza, Trionychon, and Orobanche. Orobanche is not monophyletic, but falls into two lineages: (1) the Orobanche group comprises Orobanche sect. Orobanche and the small Near Asian genus Diphelypaea and is characterized by a chromosome base number of x = 19 and (2) the Phelipanche group contains Orobanche sects. Gymnocaulis, Myzorrhiza, and Trionychon and possesses a chromosome base number of x = 12. The relationships between these two groups and to other genera such as Boschniakia or Cistanche remain unresolved. Within the Orobanche group, Orobanche macrolepis and Orobanche anatolica (including Orobanche colorata) constitute two phylogenetically distinct lineages. Intrasectional structurings proposed by some authors for O. sect. Orobanche are not confirmed by the molecular data. In most cases, intraspecific sequence divergence between accessions, if present, is negligible and not correlated with morphological or ecological traits. In a few cases, however, there is evidence for the presence of cryptic taxa. ?? 2003 Elsevier Science (USA). All rights reserved.

45 CFR 1310.21 - Safety education.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Safety education. 1310.21 Section 1310.21 Public... PROGRAM HEAD START TRANSPORTATION Special Requirements § 1310.21 Safety education. (a) Each agency must... children. The required transportation and pedestrian safety education of children and parents, except for...

47 CFR 101.1425 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 101.1425 Section 101.1425 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE... safety. MVDDS stations in the 12.2-12.7 GHz frequency band do not operate with output powers that equal...

14 CFR 31.63 - Safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety belts. 31.63 Section 31.63 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: MANNED FREE BALLOONS Design Construction § 31.63 Safety belts. (a) There must be a safety belt...

14 CFR 415.33 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 415.33 Section 415.33....33 Safety organization. (a) An applicant shall maintain a safety organization and document it by... communication, both within the applicant's organization and between the applicant and any federal launch range...

The association between patient safety culture and burnout and sense of coherence: A cross-sectional study in restructured and not restructured intensive care units.

Science.gov (United States)

Vifladt, Anne; Simonsen, Bjoerg O; Lydersen, Stian; Farup, Per G

2016-10-01

To study the associations between registered nurses' (RNs) perception of the patient safety culture (safety culture) and burnout and sense of coherence, and to compare the burnout and sense of coherence in restructured and not restructured intensive care units (ICUs). Cross-sectional study. RNs employed at seven ICUs in six hospitals at a Norwegian Hospital Trust. One to four years before the study, three hospitals merged their general and medical ICUs into one general mixed ICU. The safety culture, burnout and sense of coherence were measured with the questionnaires Hospital Survey on Patient Safety Culture, Bergen Burnout Indicator and Sense of Coherence. Participant characteristics and working in restructured and not restructured ICUs were registered. In total, 143/289(49.5%) RNs participated. A positive safety culture was statistically significantly associated with a low score for burnout and a strong sense of coherence. No statistically significant differences were found in burnout and sense of coherence between RNs in the restructured and not restructured ICUs. In this study, a positive safety culture was associated with absence of burnout and high ability to cope with stressful situations. Burnout and sense of coherence were independent of the restructuring process. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

75 FR 56549 - National Institute for Occupational Safety and Health (NIOSH), Safety and Occupational Health...

Science.gov (United States)

2010-09-16

... Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia, 22314, Telephone (703) 684-5900, Fax (703) 684... conduct of Study Section business and for the study section to consider safety and occupational health...

29 CFR 500.100 - Vehicle safety obligations.

Science.gov (United States)

2010-07-01

... safety standards. Prima facie evidence that safety standards have been met will be shown by the presence... 29 Labor 3 2010-07-01 2010-07-01 false Vehicle safety obligations. 500.100 Section 500.100 Labor... § 500.100 Vehicle safety obligations. (a) General obligations. Each farm labor contractor, agricultural...

21 CFR 315.6 - Evaluation of safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Evaluation of safety. 315.6 Section 315.6 Food and... USE DIAGNOSTIC RADIOPHARMACEUTICALS § 315.6 Evaluation of safety. (a) Factors considered in the safety...)(1) To establish the safety of a diagnostic radiopharmaceutical, FDA may require, among other...

Trichome morphology in Teucrium L. (Labiatae. A taxonomic review

Directory of Open Access Journals (Sweden)

Navarro, Teresa

1999-12-01

Full Text Available The micromorphology of trichomes of 56 Teucrium L. species belonging to the 9 sections of the genus in the Mediterranean área was surveyed by scanning electrón microscopy (SEM of leaves, calyx, corolla and nutlets. 25 trichome types are described, 12 of them are new. Thin walled hairs are the exclusive type found in the corolla and are the most widespread type on the abaxial side of the leaves. Subsessile glandular hairs, 2-4-celled, are found on the nutlet and leaves of the semi-shrubby and paleoendemic species. The presence of short or elongated, generally adpressed simple thick-walled slighüy conical hairs provides an additional character to clarify the boundaries between sect. Chamedrys (Mill. Schreb, and sect. Polium (Mill. Schreb. Branched non-glandular hairs are confined to sect. Polium subsect Polium, except for the rare branched hair conical and thick-walled type found in Teucrium barbarum Jahand. & Maire (sect. Chamaedrys and T. heterophyllum L`Hér. from sect. Teucrium. This last section is well defined by the absence of simple slighüy conical thick-walled hairs and the glandular hairs in the corolla. Sect. Teucriopsis Benth, is of particular interest for the exclusive presence of branched and peltate glandular hairs on the nutlets surface. Sect. Chamedrys is a homogeneous group, distinguished from the other sections by an indumentum formed only by trichomes types evolved from the simple slighüy conical thick-walled hairs. This section overlaps, in the presence of glandular sub-sessile hair on the nutlets surface, with sects. Isotriodon Boiss, and sect. Polium subsect. Rotundifolia Cohén ex Valdés Berm. & Sánchez Crespo. The trichomes type of the calyx teeth, abaxial side of the leaf and latero-posterior corolla lobes can be used as a distinctive taxonomic character at specific and infra-specific level. This study supports Bentham's delimitaüon of sections with the addiüons subequently made by Boissier.La micromorfología de

Federal Court of Administration confirms preclusion of objections

International Nuclear Information System (INIS)

1982-01-01

1. The preclusion established as a rule of law in sub-section 1 of sect. 3 of the Ordinance concerning the Procedure for Licensing Nuclear Installations is not only applicable to administrative proceedings, but also to administrative court proceedings. 2. In an advanced process situation, the preclusion rule of sub-section 1 of sect. 3 of the Ordinance concerning the Procedure for Licensing Nuclear Installations is applicable, this does not constitute a violation of the principle of having 'fair' proceedings. 3. Objections as defined by the above-mentioned regulation have to be presented with reference to the project and within the period allowed, during the licensing procedure concerning the project. The Federal Court of Administration has confirmed the preclusion of objections. The court dismissed the complainant's appeal against the non-admission of appeal ruled in the decision of the Administrative Court of Baden-Wuerttemberg of Nov. 7, 1980. (orig./HP) [de

The safety of the AGR

International Nuclear Information System (INIS)

Dale, G.C.; Bowerman, J.M.

1982-01-01

The publication is in 10 parts. Section 1 describes regulatory control of the nuclear industry in the UK and outlines the principal Acts of Parliament and international regulations currently in force in the licensing of nuclear power stations. Section 2 discusses the responsibilities laid on licensees of nuclear sites for ensuring the safety of their employees and members of the public. In Section 3, a comprehensive description of the Advanced Gas-cooled Reactor (AGR) system and its principal components is given. The safety features are described in Section 4. Radiological effects are described in Section 5. Section 6 explains how different types of radioactive wastes arise and describes their management and plans for their long-term disposal. Section 7 deals with the transportation of fuel and radioactive waste. Section 8 is devoted to fault conditions; the steps taken to ensure adequate protection against faults and the reliability of plant are described. Liaison with local communities is discussed in Section 9; the role of the Local Liaison Committees is described and details of emergency plans are given. The final section covers the decommissioning and dismantling of power stations after they have reached the end of their useful lives. (author)

47 CFR 101.1525 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false RF safety. 101.1525 Section 101.1525 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Service and Technical Rules for the 70/80/90 GHz Bands § 101.1525 RF safety. Licensees in the 70...

46 CFR 169.723 - Safety belts.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Safety belts. 169.723 Section 169.723 Shipping COAST... Control, Miscellaneous Systems, and Equipment § 169.723 Safety belts. Each vessel must carry a harness type safety belt conforming to Offshore Racing Council (ORC) standards for each person on watch or...

14 CFR 431.33 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 431.33 Section 431.33... Launch and Reentry of a Reusable Launch Vehicle § 431.33 Safety organization. (a) An applicant shall maintain a safety organization and document it by identifying lines of communication and approval authority...

A compact fast-neutron producing target for high resolution cross section measurements

NARCIS (Netherlands)

Flaska, M.

2006-01-01

A proper knowledge of neutron cross sections is very important for the operation safety of various nuclear facilities. Reducing uncertainties in the neutron cross sections can lead to an enhanced safety of present and future nuclear power systems. Accurate neutron cross sections also play a relevant

Pemikiran Epistemologi Barat: dari Plato Sampai Gonseth

Directory of Open Access Journals (Sweden)

Nunu Burhanuddin

2015-06-01

Full Text Available This paper riviewing the Western epistemology thought. The theme focuses on Plato to Gonseth. The Epistemology that referred in this article, is to think about "how humans acquire knowledge?". From this then appear four types of sect modern western epistemology thought, namely: sect of empiricism, rationalism sect, kantinian sect, sect of positivism. Furthermore, the social positivism sciences developed by Comte leaves serious problems associated with the loss of the role of the subject. This problem being the background of epistemology philosophy appears that by Emund Husserl developed through the phenomenology, Habermas through hermeneutics, and Ferdinand Gonseth through critical theory.

40 CFR 240.209 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 240.209 Section 240.209 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES GUIDELINES FOR THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.209 Safety. ...

29 CFR 1977.5 - Persons protected by section 11(c).

Science.gov (United States)

2010-07-01

... OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1977.5 Persons protected by section 11(c). (a) All employees are afforded the full protection of section 11(c). For purposes of the Act, an employee is defined... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

14 CFR 34.6 - Aircraft safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Aircraft safety. 34.6 Section 34.6... safety. (a) The provisions of this part will be revised if at any time the Administrator determines that an emission standard cannot be met within the specified time without creating a safety hazard. (b...

31 CFR 560.528 - Aircraft safety.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Aircraft safety. 560.528 Section 560..., Authorizations and Statements of Licensing Policy § 560.528 Aircraft safety. Specific licenses may be issued on a... the safety of civil aviation and safe operation of U.S.-origin commercial passenger aircraft. ...

Communication of geo-scientific safety arguments

International Nuclear Information System (INIS)

Flavelle, P.; Goodwin, B.; Jensen, M.; Linden, R.; Mazurek, M.; Srivastave, M.; Strom, A.; Sudicky, E.; Voinis, S.

2007-01-01

Working Group B addressed the communication of geo-scientific safety arguments through a discussion of practical experience as it related to the methods, types of information and specific arguments found to best communicate geo-scientific concepts and notions of safety with broad audiences including, colleagues, authorities and regulators, political decision makers, academics, and the general public. The following questions were suggested by the programme committee of the AMIGO-2 workshop for discussion by Working Group B with respect to the communication of geo-scientific information and safety arguments: - What is the place of geo-scientific arguments in relation to quantitative and qualitative topics like scenario and FEPs (features, events, processes) assessment, simulated repository evolution, calculated dose or risk impacts, engineering tests of materials, etc., when presenting a safety case to different audiences and with respect to the various stages of the repository programme? (see section 3). - Would we be better off focusing messages to the public on time scales of a few hundred years or a few generations? (see section 4). - How do you handle the fact that geoscience interpretations seldom are unique and data often are open to various interpretations? (see section 5). - How do you handle expert controversy on a specific topic? (see section 6). (authors)

Tank farms criticality safety manual

International Nuclear Information System (INIS)

FORT, L.A.

2003-01-01

This document defines the Tank Farms Contractor (TFC) criticality safety program, as required by Title 10 Code of Federal Regulations (CFR-), Subpart 830.204(b)(6), ''Documented Safety Analysis'' (10 CFR- 830.204 (b)(6)), and US Department of Energy (DOE) 0 420.1A, Facility Safety, Section 4.3, ''Criticality Safety.'' In addition, this document contains certain best management practices, adopted by TFC management based on successful Hanford Site facility practices. Requirements in this manual are based on the contractor requirements document (CRD) found in Attachment 2 of DOE 0 420.1A, Section 4.3, ''Nuclear Criticality Safety,'' and the cited revisions of applicable standards published jointly by the American National Standards Institute (ANSI) and the American Nuclear Society (ANS) as listed in Appendix A. As an informational device, requirements directly imposed by the CRD or ANSI/ANS Standards are shown in boldface. Requirements developed as best management practices through experience and maintained consistent with Hanford Site practice are shown in italics. Recommendations and explanatory material are provided in plain type

Boekbesprekings : Book Reviews

African Journals Online (AJOL)

1974-05-18

May 18, 1974 ... It is consequently a we come addItl(;lTI to the orthopaedic library. The ~rst sectIOn of.the book gives a very concise and lucid. synopsIS of.the pertInent mechanical facts. and the second part deals WIth the rele,:,ant biological aspects of the musculo- skeletal system..The t?ird and final section provides a brief.

Radio-Isotopes Section, radiation Safety Division, Ministry Of The Environment, Israel: A General Review, And Future Developments

International Nuclear Information System (INIS)

Ben-Zion, S.

1999-01-01

The section of radio-isotopes in the Ministry Of Environment, is responsible for preventing environmental hazards fi.om radio-isotopes ''from cradle to grave's'. The management and the supervision of radioactive materials, includes about 350 institutes in Israel. We are dealing with the implementation and the enforcement of the environmental regulations and safety standards, and licensing for each institution and installation. Among our tasks are the following: Follow-up of the import, transportation and distribution, usage and storage and disposal of radio-isotopes, as well as legislation, risk-assessments, inspection, , and ''education'. We are also participating in committees / working groups discussing specific topics: Radioactive stores, Low RW disposal, Y2K, GIS, penalties charging, transportation and more

Radiological Emergency Response Health and Safety Manual

Energy Technology Data Exchange (ETDEWEB)

D. R. Bowman

2001-05-01

This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

29 CFR 1926.21 - Safety training and education.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

40 CFR 257.3-8 - Safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Safety. 257.3-8 Section 257.3-8... and Practices § 257.3-8 Safety. (a) Explosive gases. The concentration of explosive gases generated by... shall not pose a hazard to the safety of persons or property from fires. This may be accomplished...

LTE for public safety

CERN Document Server

Liebhart, Rainer; Wong, Curt; Merkel , Jürgen

2015-01-01

The aim of the book is to educate government agencies, operators, vendors and other regulatory institutions how LTE can be deployed to serve public safety market and offer regulatory / public safety features. It is written in such a way that it can be understood by both technical and non-technical personnel with just introductory knowledge in wireless communication. Some sections and chapters about public safety services offered by LTE network are intended to be understood by anyone with no knowledge in wireless communication.

76 FR 3908 - Safety and Occupational Health Study Section (SOHSS); National Institute for Occupational Safety...

Science.gov (United States)

2011-01-21

..., 2011 (Closed). Place: Embassy Suites Hotel, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone... address matters related to the conduct of Study Section business and for the study section to consider...

Hospital safety climate and safety behavior: A social exchange perspective.

Science.gov (United States)

Ancarani, Alessandro; Di Mauro, Carmela; Giammanco, Maria D

Safety climate is considered beneficial to the improvement of hospital safety outcomes. Nevertheless, the relations between two of its key constituents, namely those stemming from leader-subordinate relations and coworker support for safety, are still to be fully ascertained. This article uses the theoretical lens of Social Exchange Theory to study the joint impact of leader-member exchange in the safety sphere and coworker support for safety on safety-related behavior at the hospital ward level. Social exchange constructs are further related to the existence of a shame-/blame-free environment, seen as a potential antecedent of safety behavior. A cross-sectional study including 166 inpatients in hospital wards belonging to 10 public hospitals in Italy was undertaken to test the hypotheses developed. Hypothesized relations have been analyzed through a fully mediated multilevel structural equation model. This methodology allows studying behavior at the individual level, while keeping into account the heterogeneity among hospital specialties. Results suggest that the linkage between leader support for safety and individual safety behavior is mediated by coworker support on safety issues and by the creation of a shame-free environment. These findings call for the creation of a safety climate in which managerial efforts should be directed not only to the provision of new safety resources and the enforcement of safety rules but also to the encouragement of teamwork and freedom to report errors as ways to foster the capacity of the staff to communicate, share, and learn from each other.

The association between EMS workplace safety culture and safety outcomes.

Science.gov (United States)

Weaver, Matthew D; Wang, Henry E; Fairbanks, Rollin J; Patterson, Daniel

2012-01-01

Prior studies have highlighted wide variation in emergency medical services (EMS) workplace safety culture across agencies. To determine the association between EMS workplace safety culture scores and patient or provider safety outcomes. We administered a cross-sectional survey to EMS workers affiliated with a convenience sample of agencies. We recruited these agencies from a national EMS management organization. We used the EMS Safety Attitudes Questionnaire (EMS-SAQ) to measure workplace safety culture and the EMS Safety Inventory (EMS-SI), a tool developed to capture self-reported safety outcomes from EMS workers. The EMS-SAQ provides reliable and valid measures of six domains: safety climate, teamwork climate, perceptions of management, working conditions, stress recognition, and job satisfaction. A panel of medical directors, emergency medical technicians and paramedics, and occupational epidemiologists developed the EMS-SI to measure self-reported injury, medical errors and adverse events, and safety-compromising behaviors. We used hierarchical linear models to evaluate the association between EMS-SAQ scores and EMS-SI safety outcome measures. Sixteen percent of all respondents reported experiencing an injury in the past three months, four of every 10 respondents reported an error or adverse event (AE), and 89% reported safety-compromising behaviors. Respondents reporting injury scored lower on five of the six domains of safety culture. Respondents reporting an error or AE scored lower for four of the six domains, while respondents reporting safety-compromising behavior had lower safety culture scores for five of the six domains. Individual EMS worker perceptions of workplace safety culture are associated with composite measures of patient and provider safety outcomes. This study is preliminary evidence of the association between safety culture and patient or provider safety outcomes.

76 FR 52330 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2011-08-22

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

77 FR 51810 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-08-27

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

77 FR 4048 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2012-01-26

...). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703) 684-5900, Fax... convene to address matters related to the conduct of Study Section business and for the study section to...

Retrotransposon-Based Molecular Markers for Analysis of Genetic Diversity within the Genus Linum

Science.gov (United States)

Melnikova, Nataliya V.; Kudryavtseva, Anna V.; Zelenin, Alexander V.; Lakunina, Valentina A.; Yurkevich, Olga Yu.; Speranskaya, Anna S.; Dmitriev, Alexey A.; Krinitsina, Anastasia A.; Belenikin, Maxim S.; Uroshlev, Leonid A.; Snezhkina, Anastasiya V.; Sadritdinova, Asiya F.; Koroban, Nadezda V.; Amosova, Alexandra V.; Samatadze, Tatiana E.; Guzenko, Elena V.; Lemesh, Valentina A.; Savilova, Anastasya M.; Rachinskaia, Olga A.; Kishlyan, Natalya V.; Rozhmina, Tatiana A.; Bolsheva, Nadezhda L.; Muravenko, Olga V.

2014-01-01

SSAP method was used to study the genetic diversity of 22 Linum species from sections Linum, Adenolinum, Dasylinum, Stellerolinum, and 46 flax cultivars. All the studied flax varieties were distinguished using SSAP for retrotransposons FL9 and FL11. Thus, the validity of SSAP method was demonstrated for flax marking, identification of accessions in genebank collections, and control during propagation of flax varieties. Polymorphism of Fl1a, Fl1b, and Cassandra insertions were very low in flax varieties, but these retrotransposons were successfully used for the investigation of Linum species. Species clusterization based on SSAP markers was in concordance with their taxonomic division into sections Dasylinum, Stellerolinum, Adenolinum, and Linum. All species of sect. Adenolinum clustered apart from species of sect. Linum. The data confirmed the accuracy of the separation in these sections. Members of section Linum are not as closely related as members of other sections, so taxonomic revision of this section is desirable. L. usitatissimum accessions genetically distant from modern flax cultivars were revealed in our work. These accessions are of utmost interest for flax breeding and introduction of new useful traits into flax cultivars. The chromosome localization of Cassandra retrotransposon in Linum species was determined. PMID:25243121

Multiple and asymmetrical origin of polyploid dog rose hybrids (Rosa L. sect. Caninae (DC.) Ser.) involving unreduced gametes.

Science.gov (United States)

Herklotz, V; Ritz, C M

2017-08-01

Polyploidy and hybridization are important factors for generating diversity in plants. The species-rich dog roses ( Rosa sect. Caninae ) originated by allopolyploidy and are characterized by unbalanced meiosis producing polyploid egg cells (usually 4 x ) and haploid sperm cells (1 x ). In extant natural stands species hybridize spontaneously, but the extent of natural hybridization is unknown. The aim of the study was to document the frequency of reciprocal hybridization between the subsections Rubigineae and Caninae with special reference to the contribution of unreduced egg cells (5 x ) producing 6 x offspring after fertilization with reduced (1 x ) sperm cells. We tested whether hybrids arose by independent multiple events or via a single or few incidences followed by a subsequent spread of hybrids. Population genetics of 45 mixed stands of dog roses across central and south-eastern Europe were analysed using microsatellite markers and flow cytometry. Hybrids were recognized by the presence of diagnostic alleles and multivariate statistics were used to display the relationships between parental species and hybrids. Among plants classified to subsect. Rubigineae , 32 % hybridogenic individuals were detected but only 8 % hybrids were found in plants assigned to subsect. Caninae . This bias between reciprocal crossings was accompanied by a higher ploidy level in Rubigineae hybrids, which originated more frequently by unreduced egg cells. Genetic patterns of hybrids were strongly geographically structured, supporting their independent origin. The biased crossing barriers between subsections are explained by the facilitated production of unreduced gametes in subsect. Rubigineae . Unreduced egg cells probably provide the highly homologous chromosome sets required for correct chromosome pairing in hybrids. Furthermore, the higher frequency of Rubigineae hybrids is probably influenced by abundance effects because the plants of subsect. Caninae are much more abundant

The Fukushima Daiichi Accident. Technical Volume 2/5. Safety Assessment

International Nuclear Information System (INIS)

2015-08-01

Technical Volume 1 of this report has described what happened during the accident at the Fukushima Daiichi nuclear power plant (NPP). This volume begins (Section 2.1) with a review of how the design basis of the site for external events was assessed initially and then reassessed over the life of the NPP. The section also describes the physical changes that were made to the units as a result. The remainder of the volume describes the treatment of beyond design basis events in the safety assessment of the site, the accident management provisions, the effectiveness of regulatory programmes, human and organizational factors and the safety culture, and the role of operating experience. Further background information is contained in three annexes included on the CD-ROM of this Technical Volume which describe analytical investigations of the accident along with information on topics such as system performance, defence in depth and severe accident phenomena. Section 2.2 provides an assessment of the systems that failed, resulting in a failure to maintain the fundamental safety functions in Units 1–3, which were in operation at the time of the tsunami and in which the reactor pressure vessels (RPV) and containment vessels failed. The section also describes Units 4-6, which were shut down at the time of the tsunami, and the site’s central spent fuel storage facility. Section 2.3 discusses the probabilistic and deterministic safety assessments of beyond design basis accidents (BDBAs) that had been performed for the plant and the insights from these assessments that had led to changes in the plant’s design. The section pays particular attention to the assessment of extreme natural hazards, such as the one which led to the total loss of AC power supply on the site. The additional loss of DC power supply in Units 1 and 2 played a key role in the progression of the accident because it impeded the diagnosis of plant conditions and made the operators unaware of the status of

14 CFR 23.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 23.303 Section 23.303... STANDARDS: NORMAL, UTILITY, ACROBATIC, AND COMMUTER CATEGORY AIRPLANES Structure General § 23.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. ...

28 CFR 345.83 - Job safety training.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

The Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of 2 April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

Official communication of the Safety Commission

CERN Multimedia

DG Unit

2009-01-01

We, the Prevention and Training section of the Safety Commission, would like to inform you that the new Safety Awareness course for newcomers will replace the welcome video in building 55 as of the 2nd April. The 3 levels (‘Safety at CERN’, ‘General Risks’ and ‘Specific Risks’) followed by 3 tests will determine access to CERN. Thanks to the SIR (Safety Information Registration, http://sir.cern.ch) application, it will be possible for you to follow the awareness course from your computer. For more information, go to the Safety Commission web site: http://safety-commission.web.cern.ch

Lectures on the Topological Vertex

CERN Document Server

Mariño, M

2008-01-01

In this lectures, I will summarize the approach to Gromov–Witten invariants on toric Calabi–Yau threefolds based on large N dualities. Since the large N duality/topological vertex approach computes Gromov–Witten invariants in terms of Chern–Simons knot and link invariants, Sect. 2 is devoted to a review of these. Section 3 reviews topological strings and Gromov–Witten invariants, and gives some information about the open string case. Section 4 introduces the class of geometries we will deal with, namely toric (noncompact) Calabi–Yau manifolds, and we present a useful graphical way to represent these manifolds which constitutes the geometric core of the theory of the topological vertex. Finally, in Sect. 5, we define the vertex and present some explicit formulae for it and some simple applications. A brief Appendix contains useful information about symmetric polynomials. It has not been possible to present all the relevant background and physical derivations in this set of lectures. However, these...

The South American species of Hibiscus sect. Furcaria DC. (Malvaceae-Hibisceae

Directory of Open Access Journals (Sweden)

Antonio Krapovickas

2004-01-01

Full Text Available The Hibiscus section Furcaria from South America is revised. Ten new species from Brasil are described: H. Andersonii, H. capitalensis, H. chapadensis, H. Gregoryi, H. Hochreutineri, H. itirapinensis, H. matogrossensis, H. Nanuzae, H. Saddii, H. Windischii, and a new one from Perú: H. Chancoae. Two new names are proposed: H. Hilarianus from Brasil and H. amambayensis from Paraguay. A key is provided to distinguish the 40 species of section Furcaria known from South America

French safety and criticality testing programmes

International Nuclear Information System (INIS)

Barbry, F.; Leclerc, J.; Manaranche, J.C.; Maubert, L.

1982-01-01

This article underlines the need to include experimental safety-criticality programmes in the French nuclear effort. The means and methods used at the Section of Experimental Nuclear Safety and Criticality Research, attached to the CEA Valduc Centre, are described. Three experimental programmes are presented: safety-criticality of the PWR fuel cycle, neutron poisoning of plutonium solutions by gadolinium and safety-criticality of slightly enriched and slightly moderated uranium oxide. Criticality accidents studies in solution are then described [fr

49 CFR 211.61 - Informal safety inquiries.

Science.gov (United States)

2010-10-01

... information on selected topics relating to railroad safety. A notice of each such inquiry will be published in... 49 Transportation 4 2010-10-01 2010-10-01 false Informal safety inquiries. 211.61 Section 211.61..., DEPARTMENT OF TRANSPORTATION RULES OF PRACTICE Miscellaneous Safety-Related Proceedings and Inquiries § 211...

46 CFR 62.35-10 - Flooding safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Flooding safety. 62.35-10 Section 62.35-10 Shipping... Requirements for Specific Types of Automated Vital Systems § 62.35-10 Flooding safety. (a) Automatic bilge.... (b) Remote controls for flooding safety equipment must remain functional under flooding conditions to...

30 CFR 56.4402 - Safety can use.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety can use. 56.4402 Section 56.4402 Mineral... and Combustible Liquids and Gases § 56.4402 Safety can use. Small quantities of flammable liquids drawn from storage shall be kept in safety cans labeled to indicate the contents. ...

30 CFR 57.4402 - Safety can use.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Safety can use. 57.4402 Section 57.4402 Mineral... Flammable and Combustible Liquids and Gases § 57.4402 Safety can use. Small quantities of flammable liquids drawn from storage shall be kept in safety cans labeled to indicate the contents. ...

20 CFR 401.160 - Health or safety.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Health or safety. 401.160 Section 401.160... INFORMATION Disclosure of Official Records and Information § 401.160 Health or safety. The Privacy Act allows us to disclose information in compelling circumstances where an individual's health or safety is...

45 CFR 1321.75 - Licenses and safety.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Licenses and safety. 1321.75 Section 1321.75... AND COMMUNITY PROGRAMS ON AGING Service Requirements § 1321.75 Licenses and safety. The State shall... that the facility complies with all applicable State and local health, fire, safety, building, zoning...

Annual Safety Report 1981

International Nuclear Information System (INIS)

1982-09-01

A safety report from Section K (Nuclear Physics) of the Dutch National Institute for Nuclear and High Energy Physics is presented for 1981. The report begins with general matters concerning safety policy at NIKHEF, licences and expenditure. Works accidents (none of them radiological) are detailed and accident prevention considered. The measurement programme for neutron radiation in the vicinity of the accelerator is described and the results are discussed. The means and results of personnel dosimetry are also presented. The report is concluded with a list of publications concerning safety aspects at NIKHEF. (C.F.)

The Nordic programme for nuclear safety 1990-1993

International Nuclear Information System (INIS)

1992-08-01

The status report for the first half of the year 1992 of the Nordic programme for nuclear safety 1990-1993 contains summaries of the progress of the projects under the four sections of the programme. These sections are divided under the main headings of dealing with readiness in abnormal radiation situations, nuclear wastes and deposition, radioecology and reactor safety. The projects included in the first part concern radiation-spreading prognoses and consequences for the area, strategies and methods for measuring and management of exchange of data between decision-makers, evaluation and harmonizing of remedial measures, public information, Nordic exercises in readiness and the determination of radioactive contamination in the area. Projects under the second section concern exemptions from regulatory control of radioactive material, experiences of demolition of uranium cleaning systems, storing of information, handling of radioactive wastes from reactor accidents, transport etc., and geological and climatological processes of significance for long-term safety in a final storage system. The third section of the programme handles training and quality assurance methods, aquatic radioecology, agricultural and natural ecosystems. The fourth section treats data on the safety status of Greifswald I-IV, Leningrad I-IV, Ignalia I-II, ship reactors, Brunsbuettel, Kruemmel and Kola I-IV. The programme's total budget is presented. (AB)

47 CFR 27.52 - RF safety.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false RF safety. 27.52 Section 27.52 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES Technical Standards § 27.52 RF safety. Licensees and manufacturers are subject to the...

10 CFR 851.23 - Safety and health standards.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and..., “Marine Terminals.” (6) Title 29 CFR, Part 1918, “Safety and Health Regulations for Longshoring.” (7...

Cosmological implications of grand unified theories

International Nuclear Information System (INIS)

Nanopoulos, D.V.

1982-01-01

These lectures, mainly devoted to the cosmological implications of GUTs, also include the essential ingredients of GUTs and some of their important applications to particle physics. Section 1 contains some basic points concerning the structure of the standard strong and electroweak interactions prior to grand unification. A detailed expose of GUTs is attempted in sect. 2, including their basci principles and their consequences for particle physics. The minimal, simplest GUT, SU 5 is analysed in some detail and it will be used throughout these lectures as the GUT prototype. Finally, sect. 3 contains the most important cosmological implications of GUTs, including baryon number generation in the early Universe (in rather lengthy detail), dissipative processes in the very early Universe, grand unified monopoles, etc. (orig./HSI)

New Porcini (Boletus sect. Boletus) from Australia and Thailand.

Science.gov (United States)

Halling, Roy E; Desjardin, Dennis E; Fechner, Nigel; Arora, David; Soytong, Kasem; Dentinger, Bryn T M

2014-01-01

Boletus albobrunnescens and B. austroedulis are described as new species in section Boletus from Thailand and Australia respectively. The former is easily characterized by the pure white basidiomata that stain brown. Boletus austroedulis has a gray-brown, slightly rugulose pileus with hymeniform pileipellis producing pileocystidia, and the stipe is only apically reticulate if at all. These new species represent ancient lineages inferred from prior molecular phylogenetic analyses. © 2014 by The Mycological Society of America.

14 CFR 25.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 25.303 Section 25.303... STANDARDS: TRANSPORT CATEGORY AIRPLANES Structure General § 25.303 Factor of safety. Unless otherwise specified, a factor of safety of 1.5 must be applied to the prescribed limit load which are considered...

14 CFR 29.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 29.303 Section 29.303... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Strength Requirements General § 29.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

14 CFR 27.303 - Factor of safety.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Factor of safety. 27.303 Section 27.303... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements General § 27.303 Factor of safety. Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia...

49 CFR 238.229 - Safety appliances-general.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances-general. 238.229 Section 238.229... Equipment § 238.229 Safety appliances—general. (a) Except as provided in this part, all passenger equipment continues to be subject to the safety appliance requirements contained in Federal statute at 49 U.S.C...

Undergraduate baccalaureate nursing students' self-reported confidence in learning about patient safety in the classroom and clinical settings: an annual cross-sectional study (2010-2013).

Science.gov (United States)

Lukewich, Julia; Edge, Dana S; Tranmer, Joan; Raymond, June; Miron, Jennifer; Ginsburg, Liane; VanDenKerkhof, Elizabeth

2015-05-01

Given the increasing incidence of adverse events and medication errors in healthcare settings, a greater emphasis is being placed on the integration of patient safety competencies into health professional education. Nurses play an important role in preventing and minimizing harm in the healthcare setting. Although patient safety concepts are generally incorporated within many undergraduate nursing programs, the level of students' confidence in learning about patient safety remains unclear. Self-reported patient safety competence has been operationalized as confidence in learning about various dimensions of patient safety. The present study explores nursing students' self-reported confidence in learning about patient safety during their undergraduate baccalaureate nursing program. Cross-sectional study with a nested cohort component conducted annually from 2010 to 2013. Participants were recruited from one Canadian university with a four-year baccalaureate of nursing science program. All students enrolled in the program were eligible to participate. The Health Professional Education in Patient Safety Survey was administered annually. The Health Professional Education in Patient Safety Survey captures how the six dimensions of the Canadian Patient Safety Institute Safety Competencies Framework and broader patient safety issues are addressed in health professional education, as well as respondents' self-reported comfort in speaking up about patient safety issues. In general, nursing students were relatively confident in what they were learning about the clinical dimensions of patient safety, but they were less confident about the sociocultural aspects of patient safety. Confidence in what they were learning in the clinical setting about working in teams, managing adverse events and responding to adverse events declined in upper years. The majority of students did not feel comfortable speaking up about patient safety issues. The nested cohort analysis confirmed these

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

29 CFR 1912.5 - National Advisory Committee on Occupational Safety and Health.

Science.gov (United States)

2010-07-01

... Health. 1912.5 Section 1912.5 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Matters § 1912.5 National Advisory Committee on Occupational Safety and Health. (a) Section 7(a) of the Act established a National Advisory Committee on Occupational Safety and Health. The Committee is to...

Characteristics of unit-level patient safety culture in hospitals in Japan: a cross-sectional study.

Science.gov (United States)

Fujita, Shigeru; Seto, Kanako; Kitazawa, Takefumi; Matsumoto, Kunichika; Hasegawa, Tomonori

2014-10-22

Patient safety culture (PSC) has an important role in determining safety and quality in healthcare. Currently, little is known about the status of unit-level PSC in hospitals in Japan. To develop appropriate strategies, characteristics of unit-level PSC should be investigated. Work units may be classified according to the characteristics of PSC, and common problems and appropriate strategies may be identified for each work unit category. This study aimed to clarify the characteristics of unit-level PSC in hospitals in Japan. In 2012, a cross-sectional study was conducted at 18 hospitals in Japan. The Hospital Survey on Patient Safety Culture questionnaire, developed by the United States Agency for Healthcare Research and Quality, was distributed to all healthcare workers (n =12,076). Percent positive scores for 12 PSC sub-dimensions were calculated for each unit, and cluster analysis was used to categorise the units according to the percent positive scores. A generalised linear mixed model (GLMM) was used to analyse the results of the cluster analysis, and odds ratios (ORs) for categorisation as high-PSC units were calculated for each unit type. A total of 9,124 respondents (75.6%) completed the questionnaire, and valid data from 8,700 respondents (72.0%) were analysed. There were 440 units in the 18 hospitals. According to the percent positive scores for the 12 sub-dimensions, the 440 units were classified into 2 clusters: high-PSC units (n =184) and low-PSC units (n =256). Percent positive scores for all PSC sub-dimensions for high-PSC units were significantly higher than those for low-PSC units. The GLMM revealed that the combined unit type of 'Obstetrics and gynaecology ward, perinatal ward or neonatal intensive care unit' was significantly more likely to be categorised as high-PSC units (OR =9.7), and 'Long-term care ward' (OR =0.2), 'Rehabilitation unit' (OR =0.2) and 'Administration unit' (OR =0.3) were significantly less likely to be categorised as high

16 CFR 1116.3 - Persons who must report under section 37.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Persons who must report under section 37. 1116.3 Section 1116.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY... particular model of the product is the subject of at least 3 civil actions filed in Federal or State Court...

46 CFR 129.220 - Basic safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Basic safety. 129.220 Section 129.220 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OFFSHORE SUPPLY VESSELS ELECTRICAL INSTALLATIONS General Requirements § 129.220 Basic safety. (a) Electrical equipment and installations must be suitable...

ANALYSIS ON THE INFLUENCE OF ACCUMULATION EFFECT OF LANDSCAPE COLOR ON TRAFFIC SAFETY IN THE FOGGY SECTIONS OF EXPRESSWAYS

Directory of Open Access Journals (Sweden)

Xilei Li

2017-10-01

Full Text Available The landscape color of expressways has a significant impact on a driver's visual response, thus affecting the incidence of expressways traffic accidents. Although this problem has been analyzed and discussed from different angles, there is rare quantitative analysis on the influence of accumulation effect of landscape color on the traffic safety in foggy sections of expressways. In this paper, the color combination and stroboflash of fog lamps on both sides of the road were designed from the perspective of the color research of road landscapes, and the cumulative effect of colors and stroboflash of fog lamps on the drivers’ mind was also studied. Then the interactive cumulative model based on landscape color and driving time in heavy-fog environment was established. Finally, multi-group of fog-lamp colors and spacing experiment program allowing a visibility of 200–500m in fog environments was designed by using Tobii eye-movement instrument and the UC-win/Road simulation software. According to the program, simulations were performed on several drivers to test the influence of road-landscape colors in foggy environments on the drivers' visual psychology. The results of the simulation experiment showed that the colors and stroboflash of fog lamps on both sides of the road have a positive effect on the drivers’ safety when the visibility range is 200–500m, and the driving speed is less than 70 km/h, in addition, the red and yellow were found to have the largest influence among all the studied colors. These results show that it is necessary to design landscape colors in the foggy sections of expressways.

Experimental tests and theoretical predictions for electroweak processes

International Nuclear Information System (INIS)

Martinelli, G.; Istituto Nazionale di Fisica Nucleare, Frascati

1987-01-01

In sect. 2, I will briefly recall the basic ingredients of the standard model and I will define the relevant parameters. Low-energy processes which enter into the determination of neutral-current couplings to fermions (in particular sin 2 θ W ) are presented in sect. 3. Radiative corrections to these processes are discussed in sect. 4. In sect. 5 the measurements of the W and Z 0 masses at the SPS collider are described and compared with theoretical predictions including one-loop radiative corrections. (orig./BBO)

33 CFR 147.801 - Boxer Platform safety zone.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Boxer Platform safety zone. 147.801 Section 147.801 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OUTER CONTINENTAL SHELF ACTIVITIES SAFETY ZONES § 147.801 Boxer Platform safety zone. (a...

Introduction to integrable many-body systems III

International Nuclear Information System (INIS)

Bajnok, Z.; Samaj, L.

2011-01-01

This is the third part of a three-volume introductory course about integrable systems of interacting bodies. The emphasis is put onto the method of Thermodynamic Bethe Ansatz. Two kinds of integrable models are studied. Systems of itinerant electrons, forming a part of Condensed Matter Physics, involve the Hubbard lattice model of electrons with short-ranged one-site interactions (Sect. 20) and the s-d exchange Kondo model (Sect. 21), describing the scattering of conduction electrons on a spin-s impurity. Methods and basic concepts used in Quantum Field Theory are explained on the integrable (1 + 1)-dimensional sine-Gordon model. We start with the classical description of the model in Sect. 22, analyze its finite energy field configurations (soliton, anti-soliton and breathers) and show its classical integrability. The model is quantized by using two schemes: the conformal (Sect. 23) and Lagrangian (Sect. 24) quantizations. The scattering matrix of the sine-Gordon theory is derived at the full quantum level in the bootstrap scheme and is compared to its classical limit in Sect. 25. The parameters of the scattering matrix are related to those of the Lagrangian by calculating the ground-state energy in an applied magnetic field in two ways: Conformal perturbation theory and Thermodynamic Bethe Ansatz (Sect. 26). The relation of the sine-Gordon theory to the XXZ Heisenberg model, which provides a complete solution of the sine-Gordon model in a finite volume, is pointed out in Sect. 27. The obtained results are applied in Sect. 28. to the derivation of the exact thermodynamics for the (symmetric) two-component Coulomb gas; this is the first classical two-dimensional fluid with exactly solvable thermodynamics (Authors)

40 CFR 258.10 - Airport safety.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Airport safety. 258.10 Section 258.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES CRITERIA FOR MUNICIPAL SOLID WASTE LANDFILLS Location Restrictions § 258.10 Airport safety. (a) Owners or operators of new...

Compilation of nuclear safety criteria potential application to DOE nonreactor facilities

International Nuclear Information System (INIS)

1992-03-01

This bibliographic document compiles nuclear safety criteria applied to the various areas of nuclear safety addressed in a Safety Analysis Report for a nonreactor nuclear facility (NNF). The criteria listed are derived from federal regulations, Nuclear Regulatory Commission (NRC) guides and publications, DOE and DOE contractor publications, and industry codes and standards. The titles of the chapters and sections of Regulatory Guide 3.26, ''Standard Format and Content of Safety Analysis Reports for Fuel Reprocessing Plants'' were used to format the chapters and sections of this compilation. In each section the criteria are compiled in four groups, namely: (1) Code of Federal Regulations, (2) USNRC Regulatory Guides, (3) Codes and Standards, and (4) Supplementary Information

Safety and Waste Management for SAM Pathogen Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the pathogens included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Biotoxin Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the biotoxins included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

29 CFR 1925.2 - Safety and health standards.

Science.gov (United States)

2010-07-01

.... Every contractor and subcontractor shall comply with the safety and health standards published in 41 CFR... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

32 CFR 989.27 - Occupational safety and health.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Occupational safety and health. 989.27 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.27 Occupational safety and health. Assess direct and indirect impacts of proposed actions on the safety and health of Air Force employees and...

49 CFR 385.313 - Who will conduct the safety audit?

Science.gov (United States)

2010-10-01

... FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.313 Who will conduct the safety audit? An individual certified under the FMCSA regulations to perform safety audits will conduct the safety audit. ... 49 Transportation 5 2010-10-01 2010-10-01 false Who will conduct the safety audit? 385.313 Section...

safety of carbon fibre reinforced plastic hollow sections in compression

African Journals Online (AJOL)

ADMINUSER

2014-01-06

Jan 6, 2014 ... Steel hollow sections were also designed using the same method. This serves as a basis of ..... used for the numerical analysis and design of circular and rectangular model sections. The software was used to analyse failure ...

The relationship between organizational leadership for safety and learning from patient safety events.

Science.gov (United States)

Ginsburg, Liane R; Chuang, You-Ta; Berta, Whitney Blair; Norton, Peter G; Ng, Peggy; Tregunno, Deborah; Richardson, Julia

2010-06-01

To examine the relationship between organizational leadership for patient safety and five types of learning from patient safety events (PSEs). Forty-nine general acute care hospitals in Ontario, Canada. A nonexperimental design using cross-sectional surveys of hospital patient safety officers (PSOs) and patient care managers (PCMs). PSOs provided data on organization-level learning from (a) minor events, (b) moderate events, (c) major near misses, (d) major event analysis, and (e) major event dissemination/communication. PCMs provided data on organizational leadership (formal and informal) for patient safety. Hospitals were the unit of analysis. Seemingly unrelated regression was used to examine the influence of formal and informal leadership for safety on the five types of learning from PSEs. The interaction between leadership and hospital size was also examined. Formal organizational leadership for patient safety is an important predictor of learning from minor, moderate, and major near-miss events, and major event dissemination. This relationship is significantly stronger for small hospitals (learning from safety events. Formal leadership support for safety is of particular importance in small organizations where the economic burden of safety programs is disproportionately large and formal leadership is closer to the front lines.

Probabilistic safety analysis procedures guide, Sections 8-12. Volume 2, Rev. 1

International Nuclear Information System (INIS)

McCann, M.; Reed, J.; Ruger, C.; Shiu, K.; Teichmann, T.; Unione, A.; Youngblood, R.

1985-08-01

A procedures guide for the performance of probabilistic safety assessment has been prepared for interim use in the Nuclear Regulatory Commission programs. It will be revised as comments are received, and as experience is gained from its use. The probabilistic safety assessment studies performed are intended to produce probabilistic predictive models that can be used and extended by the utilities and by NRC to sharpen the focus of inquiries into a range of issues affecting reactor safety. The first volume of the guide describes the determination of the probability (per year) of core damage resulting from accident initiators internal to the plant (i.e., intrinsic to plant operation) and from loss of off-site electric power. The scope includes human reliability analysis, a determination of the importance of various core damage accident sequences, and an explicit treatment and display of uncertainties for key accident sequences. This second volume deals with the treatment of the so-called external events including seismic disturbances, fires, floods, etc. Ultimately, the guide will be augmented to include the plant-specific analysis of in-plant processes (i.e., containment performance). This guide provides the structure of a probabilistic safety study to be performed, and indicates what products of the study are valuable for regulatory decision making. For internal events, methodology is treated in the guide only to the extent necessary to indicate the range of methods which is acceptable; ample reference is given to alternative methodologies which may be utilized in the performance of the study. For external events, more explicit guidance is given

Safety and Waste Management for SAM Chemistry Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the chemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Safety and Waste Management for SAM Radiochemical Methods

Science.gov (United States)

The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

Plant air systems safety study: Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

1982-05-01

The Portsmouth Gaseous Diffusion Plant Air System facilities and operations are reviewed for potential safety problems not covered by standard industrial safety procedures. Information is presented under the following section headings: facility and process description (general); air plant equipment; air distribution system; safety systems; accident analysis; plant air system safety overview; and conclusion

Technical Support Section Instrument Support Program for nuclear and nonnuclear facilities with safety requirements

International Nuclear Information System (INIS)

Adkisson, B.P.; Allison, K.L.

1995-01-01

This document describes requirements, procedures, and supervisory responsibilities of the Oak Ridge National Laboratory (ORNL) Instrumentation and Controls (I ampersand C) Division's Technical Support Section (TSS) for instrument surveillance and maintenance in nonreactor nuclear facilities having identified Operational Safety Requirements (OSRs) or Limiting Conditions Document (LCDs). Implementation of requirements comply with the requirements of U.S. Department of Energy (DOE) Orders 5480.5, 5480.22, and 5481.1B; Martin Marietta Energy Systems, Inc. (Energy Systems), Policy Procedure ESS-FS-201; and ORNL SPP X-ESH-15. OSRs and LCDs constitute an agreement or contract between DOE and the facility operating management regarding the safe operation of the facility. One basic difference between OSRs and LCDs is that violation of an OSR is considered a Category II occurrence, whereas violation of an LCD requirement is considered a Category III occurrence (see Energy Systems Standard ESS-OP-301 and ORNL SPP X-GP-13). OSRs are required for high- and moderate-hazard nuclear facilities, whereas the less-rigorous LCDs are required for low-hazard nuclear facilities and selected open-quotes generally acceptedclose quotes operations. Hazard classifications are determined through a hazard screening process, which each division conducts for its facilities

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

46 CFR 176.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...

The role of cross-sectional geometry, curvature, and limb posture in maintaining equal safety factors: a computed tomography study.

Science.gov (United States)

Brassey, Charlotte A; Kitchener, Andrew C; Withers, Philip J; Manning, Phillip L; Sellers, William I

2013-03-01

The limb bones of an elephant are considered to experience similar peak locomotory stresses as a shrew. "Safety factors" are maintained across the entire range of body masses through a combination of robusticity of long bones, postural variation, and modification of gait. The relative contributions of these variables remain uncertain. To test the role of shape change, we undertook X-ray tomographic scans of the leg bones of 60 species of mammals and birds, and extracted geometric properties. The maximum resistible forces the bones could withstand before yield under compressive, bending, and torsional loads were calculated using standard engineering equations incorporating curvature. Positive allometric scaling of cross-sectional properties with body mass was insufficient to prevent negative allometry of bending (F(b) ) and torsional maximum force (F(t) ) (and hence decreasing safety factors) in mammalian (femur F(b) ∞M(b) (0.76) , F(t) ∞M(b) (0.80) ; tibia F(b) ∞M(b) (0.80) , F(t) ∞M(b) (0.76) ) and avian hindlimbs (tibiotarsus F(b) ∞M(b) (0.88) , F(t) ∞M(b) (0.89) ) with the exception of avian femoral F(b) and F(t) . The minimum angle from horizontal a bone must be held while maintaining a given safety factor under combined compressive and bending loads increases with M(b) , with the exception of the avian femur. Postural erectness is shown as an effective means of achieving stress similarity in mammals. The scaling behavior of the avian femur is discussed in light of unusual posture and kinematics. Copyright © 2013 Wiley Periodicals, Inc.

Criticality safety evaluations - a open-quotes stalking horseclose quotes for integrated safety assessment

International Nuclear Information System (INIS)

Williams, R.A.

1995-01-01

The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility's criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE

Safety assessment for TA-48 radiochemical operations

International Nuclear Information System (INIS)

1994-08-01

The purpose of this report is to document an assessment performed to evaluate the safety of the radiochemical operations conducted at the Los Alamos National Laboratory operations area designated as TA-48. This Safety Assessment for the TA-48 radiochemical operations was prepared to fulfill the requirements of US Department of Energy (DOE) Order 5481.1B, ''Safety Analysis and Review System.'' The area designated as TA-48 is operated by the Chemical Science and Technology (CST) Division and is involved with radiochemical operations associated with nuclear weapons testing, evaluation of samples collected from a variety of environmental sources, and nuclear medicine activities. This report documents a systematic evaluation of the hazards associated with the radiochemical operations that are conducted at TA-48. The accident analyses are limited to evaluation of the expected consequences associated with a few bounding accident scenarios that are selected as part of the hazard analysis. Section 2 of this report presents an executive summary and conclusions, Section 3 presents pertinent information concerning the TA-48 site and surrounding area, Section 4 presents a description of the TA-48 radiochemical operations, and Section 5 presents a description of the individual facilities. Section 6 of the report presents an evaluation of the hazards that are associated with the TA-48 operations and Section 7 presents a detailed analysis of selected accident scenarios

Specification Section 01065S ES&H for Service Contracts

Energy Technology Data Exchange (ETDEWEB)

Kirsch, Greg C. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2014-07-01

Section Includes: Requirements and guidelines in performance of work concerning protection of environment and property, and the safety and health of Contractors, Sandia National Laboratories (SNL) and Department of Energy (DOE) employees, visitors to SNL, and members of the public. This Section is applicable only to Service Contracts that do not involve construction or construction-like activities. Construction and construction-like activities are covered by Section 01065, Environment, Safety and Health (ES&H) for Construction Contracts. The entire ES&H program shall focus on safe-by-design intent, understanding the technical basis for the work, identifying and controlling energy sources, unacceptable consequences, risk assessments, and positive verification.

14 CFR 417.103 - Safety organization.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Safety organization. 417.103 Section 417... organization. (a) A launch operator must maintain and document a safety organization. A launch operator must... within the launch operator's organization and between the launch operator and any federal launch range or...

16 CFR 1115.8 - Compliance with product safety standards.

Science.gov (United States)

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

47 CFR 80.1109 - Distress, urgency, and safety communications.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Distress, urgency, and safety communications. 80.1109 Section 80.1109 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Global Maritime Distress and Safety System (GMDSS...

Unresolved safety issues: where do we go from here

International Nuclear Information System (INIS)

Aycock, M.B.

1980-01-01

Section 210 of the Energy reorganization Act of 1974, as amended requires the NRC to develop a program for resolving Unresolved Safety Issues related to nuclear power plants. Seventeen Unresolved Safety Issues were identified by the NRC in 1978 and by early 1979 the NRC Unresolved Safety Issues Program was quickly becoming a well defined and manageable effort. Although, the Three Mile Island accident caused the momentum developed in early 1979 to be lost, efforts on ongoing generic tasks were continued by a special NRC Task Force established in June 1979. The momentum that was lost must be regained, however, if the Congressional mandate in Section 210 is to be met. With increased industry involvement and the marriage of the Unresolved Safety Issues Program with the improved and broader safety program development, audit and evaluation activities of the new NRR Division of Safety Technology, this should be possible

Safety class methodology

International Nuclear Information System (INIS)

Donner, E.B.; Low, J.M.; Lux, C.R.

1992-01-01

DOE Order 6430.1A, General Design Criteria (GDC), requires that DOE facilities be evaluated with respect to ''safety class items.'' Although the GDC defines safety class items, it does not provide a methodology for selecting safety class items. The methodology described in this paper was developed to assure that Safety Class Items at the Savannah River Site (SRS) are selected in a consistent and technically defensible manner. Safety class items are those in the highest of four categories determined to be of special importance to nuclear safety and, merit appropriately higher-quality design, fabrication, and industrial test standards and codes. The identification of safety class items is approached using a cascading strategy that begins at the 'safety function' level (i.e., a cooling function, ventilation function, etc.) and proceeds down to the system, component, or structure level. Thus, the items that are required to support a safety function are SCls. The basic steps in this procedure apply to the determination of SCls for both new project activities, and for operating facilities. The GDC lists six characteristics of SCls to be considered as a starting point for safety item classification. They are as follows: 1. Those items whose failure would produce exposure consequences that would exceed the guidelines in Section 1300-1.4, ''Guidance on Limiting Exposure of the Public,'' at the site boundary or nearest point of public access 2. Those items required to maintain operating parameters within the safety limits specified in the Operational Safety Requirements during normal operations and anticipated operational occurrences. 3. Those items required for nuclear criticality safety. 4. Those items required to monitor the release of radioactive material to the environment during and after a Design Basis Accident. Those items required to achieve, and maintain the facility in a safe shutdown condition 6. Those items that control Safety Class Item listed above

46 CFR 61.40-6 - Periodic safety tests.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Periodic safety tests. 61.40-6 Section 61.40-6 Shipping... INSPECTIONS Design Verification and Periodic Testing of Vital System Automation § 61.40-6 Periodic safety tests. (a) Periodic Safety tests must demonstrate the proper operation of the primary and alternate...

30 CFR 250.511 - Traveling-block safety device.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Traveling-block safety device. 250.511 Section... Traveling-block safety device. All units being used for well-completion operations that have both a traveling block and a crown block must be equipped with a safety device that is designed to prevent the...

Safety measures for integrity test apparatus for IS process. Sulfuric acid decomposition section

International Nuclear Information System (INIS)

Noguchi, Hiroki; Kubo, Shinji; Iwatsuki, Jin; Onuki, Kaoru

2013-07-01

Hazardous substances such as sulfuric acid, sulfur dioxide and hydrogen iodide acid are employed in thermochemical Iodine-Sulfur (IS) process. It is necessary to take safety measure against workers and external environments to study experimentally on IS process. Presently we have been conducting to verify the soundness of main components made of engineering material in actual corrosive condition. An integrity test apparatus for the components of sulfuric acid decomposition was set up. We will use the hazardous substances such as sulfuric acid and sulfur dioxide and perform the experiment in pressurized condition in this integrity test. Safety measures for the test apparatus, operation and abnormal situation were considered prior to starting the test. This report summarized the consideration results for the safety measures on the integrity test apparatus for the components of sulfuric acid decomposition. (author)

Moderasi Khawarij Ibadiyah

Directory of Open Access Journals (Sweden)

Ahmad Choirul Rofiq

2012-11-01

Full Text Available Generally many historians depict Kharijite sect with nega­tive image as a group that has an extreme religious ideas and noncon­formist political attitudes. Furthermore Kharijite sect was regarded as an extremist faction and radical terrorist who prefers violence against any goverment that has deviated from Islamic doctrine according to Kharijite perspective. Similar to many religious sects, Kharijite sect also separated into many factions. This separation is usually caused by difference views that frequently arouse a dispute and conflict among them. In addition, they occasionally consider another faction as an un­believer and infidel group. Because of this schism, the Kharijite sect became very weak so that can be destroyed easily. One of the Kharijite factions is Ibadite faction that is assessed by scholars as the closest fac­tion to Sunnite sect because the Ibadites have moderate views so that can survive and exist until now whereas almost Kharijite factions tend to have extreme views and perform violent actions to achieve their aims. The successful indoctrination and thorough strategy might cause this moderation attitude.

JSD1000: multi-group cross section sets for shielding materials

International Nuclear Information System (INIS)

Yamano, Naoki

1984-03-01

A multi-group cross section library for shielding safety analysis has been produced by using ENDF/B-IV. The library consists of ultra-fine group cross sections, fine-group cross sections, secondary gamma-ray production cross sections and effective macroscopic cross sections for typical shielding materials. Temperature dependent data at 300, 560 and 900 K have been also provided. Angular distributions of the group to group transfer cross section are defined by a new method of ''Direct Angular Representation'' (DAR) instead of the method of finite Legendre expansion. The library designated JSD1000 are stored in a direct access data base named DATA-POOL and data manipulations are available by using the DATA-POOL access package. The 3824 neutron group data of the ultra-fine group cross sections and the 100 neutron, 20 photon group cross sections are applicable to shielding safety analyses of nuclear facilities. This report provides detailed specifications and the access method for the JSD1000 library. (author)

Morphoanatomy of nectaries of Chamaecrista (L. Moench sections Chamaecrista , Caliciopsis and Xerocalyx (Leguminosae: Caesalpinioideae

Directory of Open Access Journals (Sweden)

Marinalva dos Santos Silva

Full Text Available ABSTRACT Nectaries are specialized structures that secrete nectar. Several species of Chamaecrista possess nectaries on the petiole, which have been shown to vary widely in morphology and the chemical nature of their secretion. However, a comprehensive investigation of the nectaries of the clade formed by sect. Chamaecrista, Caliciopsis and Xerocalyx has yet to be performed. Our study aimed to confirm whether or not the leaf glands of species of this clade are in fact nectaries, determine the chemical nature of their secretion and expand the morphoanatomical database on leaf nectaries in Chamaecrista with the intention of contributing to the taxonomy and phylogeny of the genus. Samples from herbarium and field-collected material were subjected to standard methods for light and scanning electron microscopy. Four different forms of nectaries were observed: urceolate, patelliform, verruciform and cupuliform. The nectaries were found to comprise a single-layered epidermis, nectary parenchyma, subnectary parenchyma and vascularization. Polysaccharides, lipids, phenolic compounds and proteins were detected in secretions. Although anatomical similarities were observed among the studied species, their morphology differed. Moreover, the glands are indeed nectaries and are similar to those observed in other species of the genus Chamaecrista. These data hold potential taxonomic usefulness for the studied sections.

14 CFR 33.75 - Safety analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety analysis. 33.75 Section 33.75... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.75 Safety analysis. (a... consequences of all failures that can reasonably be expected to occur. This analysis will take into account, if...

14 CFR 35.15 - Safety analysis.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Safety analysis. 35.15 Section 35.15... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the.... This analysis will take into account, if applicable: (i) The propeller system in a typical installation...

49 CFR 238.429 - Safety appliances.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Safety appliances. 238.429 Section 238.429... Equipment § 238.429 Safety appliances. (a) Couplers. (1) The leading and the trailing ends of a semi... appliance mechanical strength and fasteners. (1) All handrails, handholds, and sill steps shall be made of 1...

What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study

Science.gov (United States)

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-01-01

Objectives The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Methods Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. Results The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees’ patient safety knowledge and skills, were in place in fewer than half of organisations studied. Conclusions Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation

Fusion Safety Program. Annual report, FY 1982

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1983-07-01

The Fusion Safety Program major activities for Fiscal Year 1982 are summarized in this report. The program was started in FY-79, with the Idaho National Engineering Laboratory (INEL) designated as lead laboratory and EG and G Idaho, Inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., Activities at INEL includes major portions of papers dealing with ongoing work in tritium implantation experiments, tritium risk assessment, transient code development, heat transfer and fluid flow analysis, and high temperature oxidation and mobilization of structural material experiments. The section Outside Contracts includes studies of superconducting magnet safety conducted by Argonne National Laboratory, experiments concerning superconductor safety issues performed by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety and environmental studies by MIT, a summary of lithium safety experiments at Hanford Engineering Development Laboratory, and the results of tritium gas conversion to oxide experiments at Oak Ridge National Laboratory. A List of Publications and Proposed FY-83 Activities are also presented

48 CFR 923.7002 - Worker safety and health.

Science.gov (United States)

2010-10-01

... Information and Protection of Worker Safety and Health” or “952.223-77, Conditional Payment of Fee or Profit—Protection of Worker Safety and Health” implement the requirements of section 234C of the Atomic Energy Act... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Worker safety and health...

21 CFR 312.88 - Safeguards for patient safety.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Safeguards for patient safety. 312.88 Section 312... Severely-debilitating Illnesses § 312.88 Safeguards for patient safety. All of the safeguards incorporated within parts 50, 56, 312, 314, and 600 of this chapter designed to ensure the safety of clinical testing...

30 CFR 250.611 - Traveling-block safety device.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Traveling-block safety device. 250.611 Section... Traveling-block safety device. After May 31, 1989, all units being used for well-workover operations which have both a traveling block and a crown block shall be equipped with a safety device which is designed...

40 CFR 52.1770 - Identification of plan.

Science.gov (United States)

2010-07-01

... Avenue, NW., Washington, DC 20460 and the National Archives and Records Administration. For information... Emergency Generators 04/01/02 08/08/02, 67 FR 51461 Sect .0808 Peak Shaving Generators 07/01/99 10/22/02, 67... 8093. Sect. .0806 Cotton Gins 11/6/98 02/17/00, 65 FR 8093. Sect. .0807 Emergency Generators 11/6/98 02...

Dosimetric comparison of stopping power calibration with dual-energy CT and single-energy CT in proton therapy treatment planning

Energy Technology Data Exchange (ETDEWEB)

Zhu, Jiahua [Department of Physics, University of Adelaide, Adelaide, SA 5005 (Australia); Penfold, Scott N., E-mail: scott.penfold@adelaide.edu.au [Department of Physics, University of Adelaide, Adelaide, SA 5005, Australia and Department of Medical Physics, Royal Adelaide Hospital, Adelaide, SA 5000 (Australia)

2016-06-15

Purpose: The accuracy of proton dose calculation is dependent on the ability to correctly characterize patient tissues with medical imaging. The most common method is to correlate computed tomography (CT) numbers obtained via single-energy CT (SECT) with proton stopping power ratio (SPR). CT numbers, however, cannot discriminate between a change in mass density and change in chemical composition of patient tissues. This limitation can have consequences on SPR calibration accuracy. Dual-energy CT (DECT) is receiving increasing interest as an alternative imaging modality for proton therapy treatment planning due to its ability to discriminate between changes in patient density and chemical composition. In the current work we use a phantom of known composition to demonstrate the dosimetric advantages of proton therapy treatment planning with DECT over SECT. Methods: A phantom of known composition was scanned with a clinical SECT radiotherapy CT-simulator. The phantom was rescanned at a lower X-ray tube potential to generate a complimentary DECT image set. A set of reference materials similar in composition to the phantom was used to perform a stoichiometric calibration of SECT CT number to proton SPRs. The same set of reference materials was used to perform a DECT stoichiometric calibration based on effective atomic number. The known composition of the phantom was used to assess the accuracy of SPR calibration with SECT and DECT. Intensity modulated proton therapy (IMPT) treatment plans were generated with the SECT and DECT image sets to assess the dosimetric effect of the imaging modality. Isodose difference maps and root mean square (RMS) error calculations were used to assess dose calculation accuracy. Results: SPR calculation accuracy was found to be superior, on average, with DECT relative to SECT. Maximum errors of 12.8% and 2.2% were found for SECT and DECT, respectively. Qualitative examination of dose difference maps clearly showed the dosimetric advantages

LNG Safety Assessment Evaluation Methods

Energy Technology Data Exchange (ETDEWEB)

Muna, Alice Baca [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); LaFleur, Angela Christine [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-05-01

Sandia National Laboratories evaluated published safety assessment methods across a variety of industries including Liquefied Natural Gas (LNG), hydrogen, land and marine transportation, as well as the US Department of Defense (DOD). All the methods were evaluated for their potential applicability for use in the LNG railroad application. After reviewing the documents included in this report, as well as others not included because of repetition, the Department of Energy (DOE) Hydrogen Safety Plan Checklist is most suitable to be adapted to the LNG railroad application. This report was developed to survey industries related to rail transportation for methodologies and tools that can be used by the FRA to review and evaluate safety assessments submitted by the railroad industry as a part of their implementation plans for liquefied or compressed natural gas storage ( on-board or tender) and engine fueling delivery systems. The main sections of this report provide an overview of various methods found during this survey. In most cases, the reference document is quoted directly. The final section provides discussion and a recommendation for the most appropriate methodology that will allow efficient and consistent evaluations to be made. The DOE Hydrogen Safety Plan Checklist was then revised to adapt it as a methodology for the Federal Railroad Administration’s use in evaluating safety plans submitted by the railroad industry.

Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. Fourth National Report on Compliance with the Joint Convention Obligations. France

International Nuclear Information System (INIS)

2011-09-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management, hereinafter referred to as the 'Joint Convention', is the result of international discussions that followed the adoption of the Convention on Nuclear Safety, in 1994. France signed the Joint Convention at the General Conference of the International Atomic Energy Agency (IAEA) held on 29 September 1997, the very first day the Joint Convention was opened for signature. She approved it on 22 February 2000 and filed the corresponding instruments with the IAEA on 27 April 2000. The Joint Convention entered into force on 18 June 2001. For many years, France has been taking an active part in the pursuit of international actions to reinforce nuclear safety and considers the Joint Convention to be a key step in that direction. The fields covered by the Joint Convention have long been part of the French approach to nuclear safety. This report is the fourth of its kind. It is published in accordance with Article 32 of the Joint Convention and presents the measures taken by France to meet each of her obligations set out in the Convention. The facilities and radioactive materials covered by the Joint Convention are much diversified in nature and are controlled in France by different regulatory authorities (see Section E). Over and above a specific threshold of radioactive content, a facility is referred to as a 'basic nuclear facility' (installation nucleaire de base - INB) and placed under the control of the French Nuclear Safety Authority (Autorite de surete nucleaire - ASN). Below that threshold and provided that the facility involved falls under a category of the nomenclature of classified facilities for other purposes than their radioactive materials, any facility may be considered as a 'classified facility on environmental-protection grounds' (installation classee pour la protection de l'environnement - ICPE) and placed under the control of the Ministry for the

Childhood road safety behaviors in China: a cross-sectional study of Guangzhou city.

Science.gov (United States)

Yu, Jie; Zou, Nan; Liu, Yue; Fu, Lianning; Liu, Liya; Yuan, Ann

2012-01-01

This article examines traffic safety behaviors for different types of road users among children aged 0 to 17 years in Guangzhou, China. A stratified cluster sample of 7034 children from pediatric clinics (816 children aged 0-2 years who are receiving vaccines), kindergartens (1148 children aged 3-5 years), primary schools (2410 children aged 6-11 years), and secondary schools (2660 children aged 12-17 years) was collected by self-reported questionnaire surveys. The respondents were instructed to respond to each behavior question, using response choices scoring from 0 to 3. An 18-item-weighted Road Safety Behavior Index (RSBI), including 5 items for walking, 7 items for cycling, 2 items for public transport, and 4 items for private motor vehicles, was developed to quantify the child road safety behaviors and further investigate their interrelations with the sociodemographic factors among different age groups and travel categories. A higher RSBI indicates a lower risk of childhood road safety. Results from statistical analysis indicate that (1) the effects of children's sociodemographic characteristics on the RSBIs differ greatly concerning each particular travel category; and (2) RSBIs are associated more with child-related characteristics than with parent-related characteristics as the age of the children's group increases. The research findings from analyzing the self-report questionnaires were further validated with field observational records, medical records, and police records. The article concludes with some recommendations for preventing the increasing toll of road traffic injury among Chinese children, which include (1) continuing educational efforts to increase knowledge of road safety and reduce traffic risk behaviors for children and their parents; (2) creating a safe and convenient environment for walking, cycling, and public transport travelers; and (3) promoting legislation and enforcement such as the mandatory usage of bicycle helmets and child

78 FR 57903 - Aerospace Safety Advisory Panel; Charter Renewal

Science.gov (United States)

2013-09-20

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-116] Aerospace Safety Advisory Panel... and amendment of the charter of the Aerospace Safety Advisory Panel. SUMMARY: Pursuant to sections 14... determined that renewal and amendment of the charter of the Aerospace Safety Advisory Panel is in the public...

Nuclear safety organisation in France

International Nuclear Information System (INIS)

1979-12-01

This report outlines the public authorities responsible for the safety of nuclear installations in France. The composition and responsibilities of the Central Safety Service of Nuclear Installations within the Ministry of Industry, the Institute of Nuclear Protection and Safety within the CEA, the Central Service of Protection Against Ionising Radiation and the Interministerial Committee of Nuclear Safety are given. Other areas covered include the technical safety examination of large nuclear installations, the occurrence of accidents, treatment and control of release of radioactive wastes and decommissioning. The section on regulations covers the authorisation procedure, plant commissioning, release of radioactive effluents, surveillance and protection of workers exposed to ionising radiation. The situation is compared with the USA and the Federal Republic of Germany. A list of commercial nuclear installations in France is given

Safety assessment principles for nuclear plants

International Nuclear Information System (INIS)

1992-01-01

The present Safety Assessment Principles result from the revision of those which were drawn up following a recommendation arising from the Sizewell-B enquiry. The principles presented here relate only to nuclear safety; there is a section on risks from normal operation and accident conditions and the standards against which those risks are assessed. A major part of the document deals with the principles that cover the design of nuclear plants. The revised Safety assessment principles are aimed primarily at the safety assessment of new nuclear plants but they will also be used in assessing existing plants. (UK)

14 CFR 125.211 - Seat and safety belts.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Seat and safety belts. 125.211 Section 125... Requirements § 125.211 Seat and safety belts. (a) No person may operate an airplane unless there are available... the airplane who is at least 2 years old; and (2) An approved safety belt for separate use by each...

JURIDICAL REGIME OF THE INTEREST IN THE ROMANIAN LAW. PARTICULAR CASE. COMPARISON BETWEEN THE REGULATIONS OF THE REMUNERATORY INTEREST VERSUS THE PENALIZING INTEREST, IN THE ROMANIAN BANKING LAW

Directory of Open Access Journals (Sweden)

Silvia Lucia Cristea

2015-11-01

Full Text Available The analysis of a case where the rate of the conventional interest is not specified made me investigate what is the maximal limit that can be obtained in this case, under the regulation in force, in the Romanian law (sect.1!To formulate a solution, I considered as necessary to analyze : the provision on the moratory damages (according to the Roman Civil Code and the putting of the debtor in default, in order to know what is the date starting from which the moratory damages are calculated (according to the Roman Civil Code-sect.2; the juridical regime of the interest (according to the Roman Bankin Law-sect.3;comparison between the remuneratory interest and the penalizing interest (according to the Roman Banking Law-sect.4;solution for the case and conclusions-sect. 5.

Criticality safety evaluations - a {open_quotes}stalking horse{close_quotes} for integrated safety assessment

Energy Technology Data Exchange (ETDEWEB)

Williams, R.A. [Westinghouse Electric Corp., Columbia, SC (United States)

1995-12-31

The Columbia Fuel Fabrication Facility of the Westinghouse Commercial Nuclear Fuel Division manufactures low-enriched uranium fuel and associated components for use in commercial pressurized water power reactors. To support development of a comprehensive integrated safety assessment (ISA) for the facility, as well as to address increasing U.S. Nuclear Regulatory Commission (NRC) expectations regarding such a facility`s criticality safety assessments, a project is under way to complete criticality safety evaluations (CSEs) of all plant systems used in processing nuclear materials. Each CSE is made up of seven sections, prepared by a multidisciplinary team of process engineers, systems engineers, safety engineers, maintenance representatives, and operators. This paper provides a cursory outline of the type of information presented in a CSE.

Safety culture in nuclear installations. Management of safety and safety culture in Indian NPPs

International Nuclear Information System (INIS)

Rawal, S.C.

2002-01-01

Nuclear Power Corporation Of India Ltd. (NPCIL) is a company owned by Government of India and is responsible for Design, Construction, Commissioning, Operation and Decommissioning of Nuclear Power plants in India. Presently, a total of 13 Nuclear power Stations are in operation with an installed capacity of 2620 MWe and 2 VVR type PWR Units of 1000 MWe capacity each, 2 PHWR type units of 500 MWe capacity each and 4 PHWR type 220 MWe capacity each are under construction. NPPs generation capacity has been increased from 70% to 85% in the span Of last 7 years with high level of safety standards. This could be achieved through Management commitment towards building a strong Safety Culture. Safety culture is that assembly of characteristics and attitudes in organisation and individuals which establishes that as an overriding priority nuclear plant safety issues receives the attention warranted by their significance. This definition of safety culture brings out two major components in its manifestation. The framework within which individuals within the organisation works.The attitude and response of individual towards the safety issues over productivity and economics in the organisational work practices. The two attributes of safety culture are built in and upgraded in each individuals through special training at the time of entry in the organisation and later through in built procedures in the work practices, motivation and encouragement for free participation of each individuals. Individuals are encouraged to participate in Quality circle teams at the sectional level and review of safety proposal originated by individuals in Station operation Review Committee at Station level, in addition to this to continuously enhance the safety culture, refresher training courses are being organised at regular intervals. The safety related proposals are categorised in to two namely: Proposals from Operating Plants, and Proposals from projects and Design. The concept of safety

Inland Waterway Environmental Safety

Science.gov (United States)

Reshnyak, Valery; Sokolov, Sergey; Nyrkov, Anatoliy; Budnik, Vlad

2018-05-01

The article presents the results of development of the main components of the environmental safety when operating vessels on inland waterways, which include strategy selection ensuring the environmental safety of vessels, the selection and justification of a complex of environmental technical means, activities to ensure operation of vessels taking into account the environmental technical means. Measures to ensure environmental safety are developed on the basis of the principles aimed at ensuring environmental safety of vessels. They include the development of strategies for the use of environmental protection equipment, which are determined by the conditions for wastewater treatment of purified sewage and oily bilge water as well as technical characteristics of the vessels, the introduction of the process of the out-of-the-vessel processing of ship pollution as a technology for their movement. This must take into account the operating conditions of vessels on different sections of waterways. An algorithm of actions aimed at ensuring ecological safety of operated vessels is proposed.

IAEA code and safety guides on quality assurance

International Nuclear Information System (INIS)

Raisic, N.

1980-01-01

In the framework of its programme in safety standards development, the IAEA has recently published a Code of Practice on Quality Assurance for Safety in Nuclear Power Plants. The Code establishes minimum requirements for quality assurance which Member States should use in the context of their own nuclear safety requirements. A series of 10 Safety Guides which describe acceptable methods of implementing the requirements of specific sections of the Code are in preparation. (orig.)

Final Safety Analysis Document for Building 693 Chemical Waste Storage Building at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

Salazar, R.J.; Lane, S.

1992-02-01

This Safety Analysis Document (SAD) for the Lawrence Livermore National Laboratory (LLNL) Building 693, Chemical Waste Storage Building (desipated as Building 693 Container Storage Unit in the Laboratory's RCRA Part B permit application), provides the necessary information and analyses to conclude that Building 693 can be operated at low risk without unduly endangering the safety of the building operating personnel or adversely affecting the public or the environment. This Building 693 SAD consists of eight sections and supporting appendices. Section 1 presents a summary of the facility designs and operations and Section 2 summarizes the safety analysis method and results. Section 3 describes the site, the facility desip, operations and management structure. Sections 4 and 5 present the safety analysis and operational safety requirements (OSRs). Section 6 reviews Hazardous Waste Management's (HWM) Quality Assurance (QA) program. Section 7 lists the references and background material used in the preparation of this report Section 8 lists acronyms, abbreviations and symbols. Appendices contain supporting analyses, definitions, and descriptions that are referenced in the body of this report

Five nuclear loci resolve the polyploid history of switchgrass (Panicum virgatum L. and relatives.

Directory of Open Access Journals (Sweden)

Jimmy K Triplett

Full Text Available Polyploidy poses challenges for phylogenetic reconstruction because of the need to identify and distinguish between homoeologous loci. This can be addressed by use of low copy nuclear markers. Panicum s.s. is a genus of about 100 species in the grass tribe Paniceae, subfamily Panicoideae, and is divided into five sections. Many of the species are known to be polyploids. The most well-known of the Panicum polyploids are switchgrass (Panicum virgatum and common or Proso millet (P. miliaceum. Switchgrass is in section Virgata, along with P. tricholaenoides, P. amarum, and P. amarulum, whereas P. miliaceum is in sect. Panicum. We have generated sequence data from five low copy nuclear loci and two chloroplast loci and have clarified the origin of P. virgatum. We find that all members of sects. Virgata and Urvilleana are the result of diversification after a single allopolyploidy event. The closest diploid relatives of switchgrass are in sect. Rudgeana, native to Central and South America. Within sections Virgata and Urvilleana, P. tricholaenoides is sister to the remaining species. Panicum racemosum and P. urvilleanum form a clade, which may be sister to P. chloroleucum. Panicum amarum, P. amarulum, and the lowland and upland ecotypes of P. virgatum together form a clade, within which relationships are complex. Hexaploid and octoploid plants are likely allopolyploids, with P. amarum and P. amarulum sharing genomes with P. virgatum. Octoploid P. virgatum plants are formed via hybridization between disparate tetraploids. We show that polyploidy precedes diversification in a complex set of polyploids; our data thus suggest that polyploidy could provide the raw material for diversification. In addition, we show two rounds of allopolyploidization in the ancestry of switchgrass, and identify additional species that may be part of its broader gene pool. This may be relevant for development of the crop for biofuels.

Radiation safety requirements for radionuclide laboratories

International Nuclear Information System (INIS)

1993-01-01

In accordance with the section 26 of the Finnish Radiation Act (592/91) the safety requirements to be taken into account in planning laboratories and other premises, which affect safety in the use of radioactive materials, are confirmed by the Finnish Centre for Radiation and Nuclear Safety. The guide specifies the requirements for laboratories and storage rooms in which radioactive materials are used or stored as unsealed sources. There are also some general instructions concerning work procedures in a radionuclide laboratory

29 CFR 1977.3 - General requirements of section 11(c) of the Act.

Science.gov (United States)

2010-07-01

... WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 General § 1977.3 General requirements of... 29 Labor 9 2010-07-01 2010-07-01 false General requirements of section 11(c) of the Act. 1977.3 Section 1977.3 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

Evaluation of seismic hazards for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The main objective of this Safety Guide is to provide recommendations on how to determine the ground motion hazards for a plant at a particular site and the potential for surface faulting, which could affect the feasibility of construction and safe operation of a plant at that site. The guidelines and procedures presented in this Safety Guide can appropriately be used in evaluations of site suitability and seismic hazards for nuclear power plants in any seismotectonic environment. The probabilistic seismic hazard analysis recommended in this Safety Guide also addresses the needs for seismic hazard analysis of external event PSAs conducted for nuclear power plants. Many of the methods and processes described may also be applicable to nuclear facilities other than power plants. Other phenomena of permanent ground displacement (liquefaction, slope instability, subsidence and collapse) as well as the topic of seismically induced flooding are treated in Safety Guides relating to foundation safety and coastal flooding. Recommendations of a general nature are given in Section 2. Section 3 discusses the acquisition of a database containing the information needed to evaluate and address all hazards associated with earthquakes. Section 4 covers the use of this database for construction of a seismotectonic model. Sections 5 and 6 review ground motion hazards and evaluations of the potential for surface faulting, respectively. Section 7 addresses quality assurance in the evaluation of seismic hazards for nuclear power plants

Definition and Means of Maintaining the Criticality Prevention Design Features Portion of the PFP Safety Envelope

International Nuclear Information System (INIS)

RAMBLE, A.L.

2000-01-01

The purpose of this document is to record the technical evaluation of the Operational Safety Requirements described in the Plutonium Finishing Plant Final (PFP) Operational Safety Requirements, WHC-SD-CP-OSR-010. Rev. 0-N , Section 3.1.1, ''Criticality Prevention System.'' This document, with its appendices, provides the following: (1) The results of a review of Criticality Safety Analysis Reports (CSAR), later called Criticality Safety Evaluation Reports (CSER), and Criticality Prevention Specifications (CPS) to determine which equipment or components analyzed in the CSER or CPS are considered as one of the two unlikely, independent, and concurrent changes before a criticality accident is possible. (2) Evaluations of equipment or components to determine the safety boundary for the system (Section 4). (3) A list of essential drawings that show the safety system or component (Appendix A). (4) A list of the safety envelope (SE) equipment (Appendix B). (5) Functional requirements for the individual safety envelope equipment (Sections 3 and 4). (6) A list of the operational and surveillance procedures necessary to maintain the system equipment within the safety envelope (Section 5)

29 CFR 1977.22 - Employee refusal to comply with safety rules.

Science.gov (United States)

2010-07-01

... WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 Some Specific Subjects § 1977.22 Employee refusal to comply with safety rules. Employees who refuse to comply with occupational safety and health... Section 1977.22 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH...

NanoVipa: a miniaturized high-resolution echelle spectrometer, for the monitoring of young stars from a 6U Cubesat

Science.gov (United States)

Bourdarot, G.; Le Coarer, E.; Bonfils, X.; Alecian, E.; Rabou, P.; Magnard, Y.

2017-12-01

We introduce to astrophysical instrumentation and space optics the use of virtually imaged phased array (VIPA) to shrink échelle spectrometers and/or increase their resolution. Here, we report on both a concept of an echelle spectrometer with resolution R=50{,}000 (@653nm), which fits a 6U nanosatellite platform ({{1U= 10 cm × 10 cm × 10 cm}}), and on our laboratory tests on a R=200{,}000 demonstrator. The outline of our paper is as follows: Sect. 1 introduces our concept of a 6U payload comprising an échelle spectrometer based on the VIPA. We present also the science cases of monitoring young stars, and the wider science landscape amenable with larger telescopes. Section 2 gives a more detailed description of the VIPA and of its implementation in a cross-dispersed spectrometer. Section 3 shows the first results at R=200{,}000 we already achieved at the Institut de Planétologie et d'Astrophysique de Grenoble (IPAG). Finally, Sect. 4 is a discussion on the remaining technical points to study.

78 FR 46560 - Pipeline Safety: Class Location Requirements

Science.gov (United States)

2013-08-01

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... class location requirements for gas transmission pipelines. Section 5 of the Pipeline Safety, Regulatory... and, with respect to gas transmission pipeline facilities, whether applying IMP requirements to...

Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

Operational limits and conditions and operating procedures for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2000-01-01

This Safety Guide was prepared as part of the Agency's programme for establishing safety standards relating to nuclear power plants. The present Safety Guide supersedes the IAEA Safety Guide on Operational Limits and Conditions for Nuclear Power Plants which was issued in 1979 as Safety Series No. 50-SG-O3. For a nuclear power plant to be operated in a safe manner, the provisions made in the final design and subsequent modifications shall be reflected in limitations on plant operating parameters and in the requirements on plant equipment and personnel. Under the responsibility of the operating organization, these shall be developed during the design safety evaluation as a set of operational limits and conditions (OLCs). A major contribution to compliance with the OLCs is made by the development and utilization of operating procedures (OPs) that are consistent with and fully implement the OLCs. The requirements for the OLCs and OPs are established in Section 5 of the IAEA Safety Requirements publication Safety of Nuclear Power Plants: Operation, which this Safety Guide supplements. The purpose of this Safety Guide is to provide guidance on the development, content and implementation of OLCs and OPs. The Safety Guide is directed at both regulators and owners/operators. This Safety Guide covers the concept of OLCs, their content as applicable to land based stationary power plants with thermal neutron reactors, and the responsibilities of the operating organization regarding their establishment, modification, compliance and documentation. The OPs to support the implementation of the OLCs and to ensure their observance are also within the scope of this Safety Guide. The particular aspects of the procedures for maintenance, surveillance, in-service inspection and other safety related activities in connection with the safe operation of nuclear power plants are outside the scope of this Safety Guide but can be found in other IAEA Safety Guides. Section 2 indicates the

46 CFR 61.05-20 - Boiler safety valves.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Boiler safety valves. 61.05-20 Section 61.05-20 Shipping... INSPECTIONS Tests and Inspections of Boilers § 61.05-20 Boiler safety valves. Each safety valve for a drum, superheater, or reheater of a boiler shall be tested at the interval specified by table 61.05-10. [CGD 95-028...

The directive establishing a community framework for the nuclear safety of nuclear installations: the European Union approach to nuclear safety

International Nuclear Information System (INIS)

Garribba, M.; Chirtes, A.; Nauduzaite, M.

2009-01-01

This article aims at explaining the evolution leading to the adoption of the recent Council Directive 2009/71/EURATOM establishing a Community framework for the nuclear safety of nuclear installations adopted with the consent of all 27 members states following the overwhelming support of the European Parliament, that creates for the first time, a binding legal framework that brings legal certainty to European Union citizens and reinforces the role and independence of national regulators. The paper is divided into three sections. The first section addresses the competence of the European Atomic energy Community to legislate in the area of nuclear safety. It focuses on the 2002 landmark ruling of the European Court of justice that confirmed this competence by recognizing the intrinsic link between radiation protection and nuclear safety. The second part describes the history of the Nuclear safety directive from the initial 2003 European Commission proposal to today 's text in force. The third part is dedicated to a description of the content of the Directive and its implications on the further development of nuclear safety in the European Union. (N.C.)

Boycotting electricity rate payments - a useful means in the struggle for environmental protection

International Nuclear Information System (INIS)

Gerlach, J.W.

1980-01-01

The author proceeds from several judicial decisions and the opinion to be found in publications which mostly consider the boycotting of electricity rate payments to be inadmissible. He examines in detail the possibilities provided by Civil Law: the right to withhold payment on the grounds of a counter-claim; prophylactic claim for discontinuation, according to sect. 1004 of the Civil Code. The author concedes the electricity vendee a claim for discontinuation which, however, is limited by the statutory obligation to tolerate which is limited, according to the sections 906 and 907 of the Civil Code. By operation of Public Law, it is almost impossible to make this claim because of the licensing act of administration executed with regard to the power station. Thus a contractual and prophylactic claim for discontinuation against the electricity supply utility is only qualified to a very limited extent. Besides, there is only one possible claim left, namely to take protective measures or else for compensation resp. damages. On the part of the electricity supply utility, there is the right to withhold according to sect. 33, para. 2, 4 ABV (General Terms and Conditions governing Supply, and the possibility to demand advance payment according to sect. 28 ABV. (HSCH) [de

46 CFR 62.35-15 - Fire safety.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Fire safety. 62.35-15 Section 62.35-15 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING VITAL SYSTEM AUTOMATION Requirements for Specific Types of Automated Vital Systems § 62.35-15 Fire safety. (a) All required fire pump...

Measuring enterprise proactiveness in managing occupational safety

DEFF Research Database (Denmark)

Sønderstrup-Andersen, Hans H. K.; Fløcke, Thomas; Mikkelsen, Kim Lyngby

2010-01-01

The aim of this paper is to communicate results, and lessons learned, from developing and applying a national questionnaire based survey for measuring the initiation of occupational safety activities in Danish enterprises and public institutions1. The survey is cross-sectional and it is part...... on the safety attitude index....

Safety inspection guide, Mod III (a systematic approach to conducting a safety inspection)

International Nuclear Information System (INIS)

Davidson, J.E.

1977-06-01

This guide was developed as a comprehensive/systematic approach to the problem of performing a safety inspection. Five basic sections (categories) are considered in the guide: physical work place; machines/mechanical equipment; hazardous materials/processes/environments; energy sources; and management hazard . control factors. The basic concept is that one starts evaluating hazard potentials from the physical work place and continues considering other elements as they are added to the physical work place. This approach provides a better understanding of the interfaces of each section to the entire group. The guide is supported by an Area Safety Inspection Result form to record defects or conditions found, the evaluation (best estimate) of the urgency or priority for correcting deficiencies or areas of noncompliance, and the status of corrective action. Additionally, the guide serves as an educational tool in accident prevention for supervisors and employees

Safety and health annual report 1996

International Nuclear Information System (INIS)

1997-01-01

The 1996 report on the Health and Safety performance of the nuclear fuel cycle company BNFL at its sites in the United Kingdom demonstrates a continuing improvement. The site locations and developments are briefly described and international developments in subsidiary organisations noted. Other sections of the report cover health and safety policy, radiological and industrial safety, emergency planning, incidents, occupational health services, compensation scheme developments, transport, putting radiation in perspective, and safety and health research. Data are provided on: radioactive discharges; industrial safety of BNFL and contractors' employees; radiation dose summaries for BNFL and contractors' employees. There is evidence of the expected plateauing out of doses to BNFL employees at a level less than or similar to background radiation. (UK)

What stage are low-income and middle-income countries (LMICs) at with patient safety curriculum implementation and what are the barriers to implementation? A two-stage cross-sectional study.

Science.gov (United States)

Ginsburg, Liane R; Dhingra-Kumar, Neelam; Donaldson, Liam J

2017-06-15

The improvement of safety in healthcare worldwide depends in part on the knowledge, skills and attitudes of staff providing care. Greater patient safety content in health professional education and training programmes has been advocated internationally. While WHO Patient Safety Curriculum Guides (for Medical Schools and Multi-Professional Curricula) have been widely disseminated in low-income and middle-income countries (LMICs) over the last several years, little is known about patient safety curriculum implementation beyond high-income countries. The present study examines patient safety curriculum implementation in LMICs. Two cross-sectional surveys were carried out. First, 88 technical officers in Ministries of Health and WHO country offices were surveyed to identify the pattern of patient safety curricula at country level. A second survey followed that gathered information from 71 people in a position to provide institution-level perspectives on patient safety curriculum implementation. The majority, 69% (30/44), of the countries were either considering whether to implement a patient safety curriculum or actively planning, rather than actually implementing, or embedding one. Most organisations recognised the need for patient safety education and training and felt a safety curriculum was compatible with the values of their organisation; however, important faculty-level barriers to patient safety curriculum implementation were identified. Key structural markers, such as dedicated financial resources and relevant assessment tools to evaluate trainees' patient safety knowledge and skills, were in place in fewer than half of organisations studied. Greater attention to patient safety curriculum implementation is needed. The barriers to patient safety curriculum implementation we identified in LMICs are not unique to these regions. We propose a framework to act as a global standard for patient safety curriculum implementation. Educating leaders through the system in

10 CFR 34.42 - Radiation Safety Officer for industrial radiography.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Radiation Safety Officer for industrial radiography. 34.42 Section 34.42 Energy NUCLEAR REGULATORY COMMISSION LICENSES FOR INDUSTRIAL RADIOGRAPHY AND RADIATION... Radiation Safety Officer for industrial radiography. The RSO shall ensure that radiation safety activities...

Nitrogen-system safety study: Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

1982-07-01

The Department of Energy has primary responsibility for the safety of operations at DOE-owned nuclear facilities. The guidelines for the analysis of credible accidents are outlined in DOE Order 5481.1. DOE has requested that existing plant facilities and operations be reviewed for potential safety problems not covered by standard industrial safety procedures. This review is being conducted by investigating individual facilities and documenting the results in Safety Study Reports which will be compiled to form the Existing Plant Final Safety Analysis Report which is scheduled for completion in September, 1984. This Safety Study documents the review of the Plant Nitrogen System facilities and operations and consists of Section 4.0, Facility and Process Description, and Section 5.0, Accident Analysis, of the Final Safety Analysis Report format. The existing nitrogen system consists of a Superior Air Products Company Type D Nitrogen Plant, nitrogen storage facilities, vaporization facilities and a distribution system. The system is designed to generate and distribute nitrogen gas used in the cascade for seal feed, buffer systems, and for servicing equipment when exceptionally low dew points are required. Gaseous nitrogen is also distributed to various process auxiliary buildings. The average usage is approximately 130,000 standard cubic feet per day

75 FR 35090 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

Science.gov (United States)

2010-06-21

... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... for Occupational Safety and Health (MACOSH or Committee) was established under Section 7 of the...

76 FR 54806 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

Science.gov (United States)

2011-09-02

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0007] Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and... Committee for Occupational Safety and Health (MACOSH) was established under Section 7 of the Occupational...

Applied Health Physics and Safety annual report for 1975

International Nuclear Information System (INIS)

1976-08-01

This report describes and summarizes the activities of the applied sections and/or groups of the Health Physics Division. Projects and activities covered include personnel monitoring, environmental monitoring, radiation and safety surveys, and industrial safety

Environmental, health, and safety issues of sodium-sulfur batteries for electric and hybrid vehicles. Volume 1, Cell and battery safety

Energy Technology Data Exchange (ETDEWEB)

Ohi, J M

1992-09-01

This report is the first of four volumes that identify and assess the environmental, health, and safety issues involved in using sodium-sulfur (Na/S) battery technology as the energy source in electric and hybrid vehicles that may affect the commercialization of Na/S batteries. This and the other reports on recycling, shipping, and vehicle safety are intended to help the Electric and Hybrid Propulsion Division of the Office of Transportation Technologies in the US Department of Energy (DOE/EHP) determine the direction of its research, development, and demonstration (RD&D) program for Na/S battery technology. The reports review the status of Na/S battery RD&D and identify potential hazards and risks that may require additional research or that may affect the design and use of Na/S batteries. This volume covers cell design and engineering as the basis of safety for Na/S batteries and describes and assesses the potential chemical, electrical, and thermal hazards and risks of Na/S cells and batteries as well as the RD&D performed, under way, or to address these hazards and risks. The report is based on a review of the literature and on discussions with experts at DOE, national laboratories and agencies, universities, and private industry. Subsequent volumes will address environmental, health, and safety issues involved in shipping cells and batteries, using batteries to propel electric vehicles, and recycling and disposing of spent batteries. The remainder of this volume is divided into two major sections on safety at the cell and battery levels. The section on Na/S cells describes major component and potential failure modes, design, life testing and failure testing, thermal cycling, and the safety status of Na/S cells. The section on batteries describes battery design, testing, and safety status. Additional EH&S information on Na/S batteries is provided in the appendices.

38 CFR 61.20 - Life Safety Code capital grants.

Science.gov (United States)

2010-07-01

... (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.20 Life Safety Code capital grants. (a) This section sets forth provisions for obtaining a Life Safety Code capital grant under 38 U.S.C. 2012... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Life Safety Code capital...

10 CFR 871.2 - Public health and safety exemption.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Public health and safety exemption. 871.2 Section 871.2 Energy DEPARTMENT OF ENERGY AIR TRANSPORTATION OF PLUTONIUM § 871.2 Public health and safety exemption... property damage, or other significant threat to the public health and safety. [42 FR 48332, Sept. 23, 1977...

Regulatory Framework of Safety for HTGR

International Nuclear Information System (INIS)

Huh, Chang Wook; Suh, Nam Duk

2011-01-01

Recent accident in Fukushima Daiichi plant in Japan makes big impacts on the future of nuclear business. Many countries are changing their nuclear projects and increased safety of nuclear plants is asked for from the public. Without providing safety the society accepts, it might be almost impossible to build new plants further. In this sense high temperature gas-cooled reactor (HTGR) which is under development needs to be licensed reflecting this new expectation regarding safety. It means we should have higher level of safety goal and a systematic regulatory framework to assure the safety. In our previous paper, we evaluated the current safety goal and design practice in view of this new safety expectation after Fukushima accident. It was argued that a top-down approach starting from safety goal is necessary to develop safety requirements or to assure safety. Thus we need to propose an ultimate safety goal public accepts and then establish a systematic regulatory framework. In this paper we are going to provide a conceptual regulatory framework to guarantee the safety of HTGR. Section 2 discusses the recent trend of IAEA safety requirements and then summarize the HTGR design approach. Incorporating these discussions, we propose a conceptual framework of regulation for safety of HTGR

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K.

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

The Health and Safety Executive's regulatory framework for control of nuclear criticality safety

International Nuclear Information System (INIS)

Smith, K.; Simister, D.N.

1991-01-01

In the United Kingdom the Health and Safety at Work Act, 1974 is the main legal instrument under which risks to people from work activities are controlled. Certain sections of the Nuclear Installations Act, 1965 which deal with the licensing of nuclear sites and the regulatory control of risks arising from them, including the risk from accidental criticality, are relevant statutory provisions of the Health and Safety at Work Act. The responsibility for safety rests with the operator who has to make and implement arrangements to prevent accidental criticality. The adequacy of these arrangements must be demonstrated in a safety case to the regulatory authorities. Operators are encouraged to treat each plant on its own merits and develop the safety case accordingly. The Nuclear Installations Inspectorate (NII), for its part, assesses the adequacy of the operator's safety case against the industry's own standards and criteria, but more particularly against the NII's safety assessment principles and guides, and international standards. Risks should be made as low as reasonably practicable. Generally, the NII seeks improvements in safety using an enforcement policy which operates at a number of levels, ranging from persuasion through discussion to the ultimate deterrent of withdrawal of a site licence. This paper describes the role of the NII, which includes a specialist criticality expertise, within the Health and Safety Executive, in regulating the nuclear sites from the criticality safety viewpoint. (Author)

Licensed reactor nuclear safety criteria applicable to DOE reactors

International Nuclear Information System (INIS)

1991-04-01

The Department of Energy (DOE) Order DOE 5480.6, Safety of Department of Energy-Owned Nuclear Reactors, establishes reactor safety requirements to assure that reactors are sited, designed, constructed, modified, operated, maintained, and decommissioned in a manner that adequately protects health and safety and is in accordance with uniform standards, guides, and codes which are consistent with those applied to comparable licensed reactors. This document identifies nuclear safety criteria applied to NRC [Nuclear Regulatory Commission] licensed reactors. The titles of the chapters and sections of USNRC Regulatory Guide 1.70, Standard Format and Content of Safety Analysis Reports for Nuclear Power Plants, Rev. 3, are used as the format for compiling the NRC criteria applied to the various areas of nuclear safety addressed in a safety analysis report for a nuclear reactor. In each section the criteria are compiled in four groups: (1) Code of Federal Regulations, (2) US NRC Regulatory Guides, SRP Branch Technical Positions and Appendices, (3) Codes and Standards, and (4) Supplemental Information. The degree of application of these criteria to a DOE-owned reactor, consistent with their application to comparable licensed reactors, must be determined by the DOE and DOE contractor

75 FR 13783 - Maritime Advisory Committee for Occupational Safety and Health (MACOSH)

Science.gov (United States)

2010-03-23

... DEPARTMENT OF LABOR Occupational Safety and Health Administration Maritime Advisory Committee for Occupational Safety and Health (MACOSH) AGENCY: Occupational Safety and Health Administration (OSHA), Labor... Health (MACOSH) was established under Section 7 of the Occupational Safety and Health (OSH) Act of 1970...

Multiple-Active Multiple-Passive Antenna Systems and Applications

DEFF Research Database (Denmark)

Tsakalaki, Elpiniki

2013-01-01

-passive (MAMP) antenna topologies, as explained in Sect. 8.1. Then, Sect. 8.2 proposes MAMP antenna structures with application to reconfigurable MIMO transmission in the presence of antenna mutual coupling under poor scattering channel conditions. For this purpose, the section presents an adaptive MAMP antenna...... system capable of changing its transmission parameters via passive radiators attached to tunable loads, according to the structure of the RF propagation channel. The hybrid MAMP array structure can be tractably analyzed using the active element response vector (instead of the classical steering vector...... adaptive MAMP system can be limited to practical dimensions whereas the passive antennas require no extra RF hardware, thus meeting the cost, space, and power constrains of the users’ mobile terminals. The simulation results show that the adaptive MAMP system, thanks to its “adaptivity”, is able to achieve...

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic Safety Coordinators. 128-1.8004 Section 128-1.8004 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

R&D for Safety Codes and Standards: Materials and Components Compatibility

Energy Technology Data Exchange (ETDEWEB)

Somerday, Brian P. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); LaFleur, Chris [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Marchi, Chris San [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2015-08-01

This project addresses the following technical barriers from the Safety, Codes and Standards section of the 2012 Fuel Cell Technologies Office Multi-Year Research, Development and Demonstration Plan (section 3.8): (A) Safety data and information: limited access and availability (F) Enabling national and international markets requires consistent RCS (G) Insufficient technical data to revise standards.

29 CFR 553.30 - Occasional or sporadic employment-section 7(p)(2).

Science.gov (United States)

2010-07-01

... Occupational Titles (except in the case of public safety employees as discussed below in section (3)), as well.... Public safety employees taking on any kind of security or safety function within the same local... different capacity. (5) In addition, any activity traditionally associated with teaching (e.g., coaching...

Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

Maintenance, surveillance and in-service inspection in nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

Effective maintenance, surveillance and in-service inspection (MS and I) are essential for the safe operation of a nuclear power plant. The objective of this Safety Guide is to provide recommendations and guidance for MS and I activities to ensure that SSCs important to safety are available to perform their functions in accordance with the assumptions and intent of the design. This Safety Guide covers the organizational and procedural aspects of MS and I. However, it does not give detailed technical advice in relation to particular items of plant equipment, nor does it cover inspections made for and/or by the regulatory body. This Safety Guide provides recommendations and guidance for preventive and remedial measures, including testing, surveillance and in-service inspection, that are necessary to ensure that all plant structures, systems and components (SSCs) important to safety are capable of performing as intended. This Safety Guide covers measures for fulfilling the organizational and administrative requirements for: establishing and implementing schedules for preventive and predictive maintenance, repairing defective plant items, selecting and training personnel, providing related facilities and equipment, procuring stores and spare parts, and generating, collecting and retaining maintenance records for establishing and implementing an adequate feedback system for information on maintenance. MS and I should be subject to quality assurance in relation to all aspects important to safety. Quality assurance has been dealt with in detail in other IAEA safety standards and is covered here only in specific instances, for emphasis. In Section 2, a concept of MS and I is presented and the interrelationship between maintenance, surveillance and inspection is discussed. Section 3 concerns the functions and responsibilities of different organizations involved in MS and I activities. Section 4 provides recommendations and guidance on such organizational aspects as

Typification of some species names in Elaphoglossum section Polytrichia (Dryopteridaceae from Brazil

Directory of Open Access Journals (Sweden)

Fernando Bittencourt Matos

2014-09-01

Full Text Available The fern genus Elaphoglossum has received a great deal of attention in Brazil over the last two centuries. Nevertheless, many of the early names remain inadequately typified. In this paper, the nomenclature of some Brazilian species of Elaphoglossum sect. Polytrichia is discussed under the rules and recommendations of the International Code of Nomenclature for algae, fungi, and plants. Lectotypes are designated for the following names: Acrostichum amplissimum Fée; A. apodum Kaulf. var. sprucei Baker; A. glaziovii Fée; A. lindbergii Mett. ex Kuhn; A. prestonii Baker; Elaphoglossum spannagelii Rosenst.; and Elaphoglossum ulei H. Christ. Most of these types were collected in Brazil during the 19th century and are now preserved in several European herbaria.

The transport safety programme

International Nuclear Information System (INIS)

Selling, H.A.

1994-01-01

The transport safety programme is one of the smaller technical sub-programmes in the Radiation Safety Section of the Division of Nuclear Safety, in terms of both regular budget and professional staff allocations. The overall aim of the programme is to promote the safe movement of radioactive material worldwide. The specific objectives are the development, review and maintenance of the Regulations for the Safe Transport of Radioactive Material, Safety Series No 6, and its supporting documents Safety Series Nos 7, 37 and 80 and the assistance to Member States and International Organizations in the proper implementation of the Regulations. One of the important issues that emerged during an ongoing Review/Revision process is the transport of Low-Specific Activity (LSA) material and Surface Contaminated Objects (SCO). Many of the radioactive waste materials fall in one of these categories. The subject has gained substance because it is expected that in the next decade radioactive waste could become available in so far unprecedented quantities and volumes due to decontamination and decommissioning of nuclear facilities. (author)

29 CFR 1926.2 - Variances from safety and health standards.

Science.gov (United States)

2010-07-01

... from safety and health standards. (a) Variances from standards which are, or may be, published in this... 29 Labor 8 2010-07-01 2010-07-01 false Variances from safety and health standards. 1926.2 Section 1926.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION...

46 CFR 26.03-1 - Safety orientation.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Safety orientation. 26.03-1 Section 26.03-1 Shipping... Requirements § 26.03-1 Safety orientation. (a) Before getting underway on any uninspected passenger vessel, the... this subpart engaged in tender service at yacht clubs and marinas, and vessels being demonstrated for a...

The Management System for Nuclear Installations Safety Guide

International Nuclear Information System (INIS)

2009-01-01

This Safety Guide is applicable throughout the lifetime of a nuclear installation, including any subsequent period of institutional control, until there is no significant residual radiation hazard. For a nuclear installation, the lifetime includes site evaluation, design, construction, commissioning, operation and decommissioning. These stages in the lifetime of a nuclear installation may overlap. This Safety Guide may be applied to nuclear installations in the following ways: (a)To support the development, implementation, assessment and improvement of the management system of those organizations responsible for research, site evaluation, design, construction, commissioning, operation and decommissioning of a nuclear installation; (b)As an aid in the assessment by the regulatory body of the adequacy of the management system of a nuclear installation; (c)To assist an organization in specifying to a supplier, via contractual documentation, any specific element that should be included within the supplier's management system for the supply of products. This Safety Guide follows the structure of the Safety Requirements publication on The Management System for Facilities and Activities, whereby: (a)Section 2 provides recommendations on implementing the management system, including recommendations relating to safety culture, grading and documentation. (b)Section 3 provides recommendations on the responsibilities of senior management for the development and implementation of an effective management system. (c)Section 4 provides recommendations on resource management, including guidance on human resources, infrastructure and the working environment. (d)Section 5 provides recommendations on how the processes of the installation can be specified and developed, including recommendations on some generic processes of the management system. (e)Section 6 provides recommendations on the measurement, assessment and improvement of the management system of a nuclear installation. (f

Single- and dual-energy quantitative CT adjacent to acetabular prosthetic components

DEFF Research Database (Denmark)

Mussmann, Bo Redder; Andersen, Poul Erik; Torfing, Trine

2017-01-01

and to compare BMD measurements in single and dual energy CT (SECT and DECT). Methods and Materials: 10 male patients with uncemented hip prosthetics were scanned and rescanned using 120 kVp SECT and DECT with virtual monochromatic images reconstructed at 130 keV. Hemispherical ROIs were defined slice...... that the intraobserver agreement of the scan modes is equal. BMD cannot be measured interchangeably with SECT and DECT....

Performances of low-dose dual-energy CT in reducing artifacts from implanted metallic orthopedic devices

Energy Technology Data Exchange (ETDEWEB)

Filograna, Laura [Catholic University of Rome, School of Medicine, University Hospital ' ' A. Gemelli' ' , Department of Radiological Sciences, Institute of Radiology, Rome (Italy); University of Zurich, Department of Forensic Medicine and Imaging, Institute of Forensic Medicine, Zurich (Switzerland); Magarelli, Nicola; Leone, Antonio; Bonomo, Lorenzo [Catholic University of Rome, School of Medicine, University Hospital ' ' A. Gemelli' ' , Department of Radiological Sciences, Institute of Radiology, Rome (Italy); De Waure, Chiara; Calabro, Giovanna Elisa [Catholic University of Rome, School of Medicine, University Hospital ' ' A. Gemelli' ' , Research Centre for Health Technology Assessment, Department of Public Health, Section of Hygiene, Rome (Italy); Finkenstaedt, Tim [University Hospital Zurich, Institute of Diagnostic and Interventional Radiology, Zurich (Switzerland); Thali, Michael John [University of Zurich, Department of Forensic Medicine and Imaging, Institute of Forensic Medicine, Zurich (Switzerland)

2016-07-15

The objective was to evaluate the performances of dose-reduced dual-energy computed tomography (DECT) in decreasing metallic artifacts from orthopedic devices compared with dose-neutral DECT, dose-neutral single-energy computed tomography (SECT), and dose-reduced SECT. Thirty implants in 20 consecutive cadavers underwent both SECT and DECT at three fixed CT dose indexes (CTDI): 20.0, 10.0, and 5.0 mGy. Extrapolated monoenergetic DECT images at 64, 69, 88, 105, 120, and 130 keV, and individually adjusted monoenergy for optimized image quality (OPTkeV) were generated. In each group, the image quality of the seven monoenergetic images and of the SECT image was assessed qualitatively and quantitatively by visually rating and by measuring the maximum streak artifact respectively. The comparison between SECT and OPTkeV evaluated overall within all groups showed a significant difference (p <0.001), with OPTkeV images providing better images. Comparing OPTkeV with the other DECT images, a significant difference was shown (p <0.001), with OPTkeV and 130-keV images providing the qualitatively best results. The OPTkeV images of 5.0-mGy acquisitions provided percentages of images with scores 1 and 2 of 36 % and 30 % respectively, compared with 0 % and 33.3 % of the corresponding SECT images of 10- and 20-mGy acquisitions. Moreover, DECT reconstructions at the OPTkeV of the low-dose group showed higher CT numbers than the SECT images of dose groups 1 and 2. This study demonstrates that low-dose DECT permits a reduction of artifacts due to metallic implants to be obtained in a similar manner to neutral-dose DECT and better than reduced or neutral-dose SECT. (orig.)

Electronic Health Record-Related Safety Concerns: A Cross-Sectional Survey of Electronic Health Record Users

Science.gov (United States)

Pajunen, Tuuli; Saranto, Kaija; Lehtonen, Lasse

2016-01-01

Background The rapid expansion in the use of electronic health records (EHR) has increased the number of medical errors originating in health information systems (HIS). The sociotechnical approach helps in understanding risks in the development, implementation, and use of EHR and health information technology (HIT) while accounting for complex interactions of technology within the health care system. Objective This study addresses two important questions: (1) “which of the common EHR error types are associated with perceived high- and extreme-risk severity ratings among EHR users?”, and (2) “which variables are associated with high- and extreme-risk severity ratings?” Methods This study was a quantitative, non-experimental, descriptive study of EHR users. We conducted a cross-sectional web-based questionnaire study at the largest hospital district in Finland. Statistical tests included the reliability of the summative scales tested with Cronbach’s alpha. Logistic regression served to assess the association of the independent variables to each of the eight risk factors examined. Results A total of 2864 eligible respondents provided the final data. Almost half of the respondents reported a high level of risk related to the error type “extended EHR unavailability”. The lowest overall risk level was associated with “selecting incorrectly from a list of items”. In multivariate analyses, profession and clinical unit proved to be the strongest predictors for high perceived risk. Physicians perceived risk levels to be the highest (Prisk levels (PeLearning courses on EHR-use was associated with lower risk for some of the risk factors. Conclusions Based on a large number of Finnish EHR users in hospitals, this study indicates that HIT safety hazards should be taken very seriously, particularly in operating rooms, procedure units, emergency departments, and intensive care units/critical care units. Health care organizations should use proactive and

Reactor operation safety information document

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The report contains a reactor facility description which includes K, P, and L reactor sites, structures, operating systems, engineered safety systems, support systems, and process and effluent monitoring systems; an accident analysis section which includes cooling system anomalies, radioactive materials releases, and anticipated transients without scram; a summary of onsite doses from design basis accidents; severe accident analysis (reactor core disruption); a description of operating contractor organization and emergency planning; and a summary of reactor safety evolution. (MB)

Radiation safety and gynaecological brachytherapy

International Nuclear Information System (INIS)

Crawford, L.

1985-01-01

In 1983, the Radiation Control Section of the South Australian Health Commission conducted an investigation into radiation safety practices in gynaecological brachytherapy. Part of the investigation included a study of the transportation of radioactive sources between hospitals. Several deficiences in radiation safety were found in the way these sources were being transported. New transport regulations came into force in South Australia in July 1984 and since then there have been many changes in the transportation procedure

Aerospace Safety Advisory Panel

Science.gov (United States)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

Energy Technology Data Exchange (ETDEWEB)

1989-06-01

The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportation safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included.

Oak Ridge National Laboratory Health and Safety Long-Range Plan: Fiscal years 1989--1995

International Nuclear Information System (INIS)

1989-06-01

The health and safety of its personnel is the first concern of ORNL and its management. The ORNL Health and Safety Program has the responsibility for ensuring the health and safety of all individuals assigned to ORNL activities. This document outlines the principal aspects of the ORNL Health and Safety Long-Range Plan and provides a framework for management use in the future development of the health and safety program. Each section of this document is dedicated to one of the health and safety functions (i.e., health physics, industrial hygiene, occupational medicine, industrial safety, nuclear criticality safety, nuclear facility safety, transportation safety, fire protection, and emergency preparedness). Each section includes functional mission and objectives, program requirements and status, a summary of program needs, and program data and funding summary. Highlights of FY 1988 are included

Main ring transition crossing simulations

International Nuclear Information System (INIS)

Kourbanis, I.; Ng, King-Yuen.

1990-10-01

We used ESME to simulate transition crossing in the Main Ring (MR). For the simulations, we followed the MR 29 cycle used currently for bar p production with a flat top of 120 GeV. In Sect. II, some inputs are discussed. In Sect. III, we present simulations with space charge turned off so that the effect of nonlinearity can be studied independently. When space charge is turned on in Sect. IV, we are faced with the problem of statistical errors due to binning, an analysis of which is given in the Appendices. Finally in Sects. V and VI, the results of simulations with space charge are presented and compared with the experimental measurements. 7 refs., 6 figs

78 FR 30937 - National Advisory Committee on Occupational Safety and Health (NACOSH)

Science.gov (United States)

2013-05-23

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2013-0015] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... meeting is open to the public. Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act...

46 CFR 189.60-15 - Cargo Ship Safety Radio Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate. 189.60-15 Section... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 189.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation...

Safety guide on fire protection in nuclear power plants

International Nuclear Information System (INIS)

1976-01-01

The purpose of the Safety Guide is to give specific design and operational guidance for protection from fire and explosion in nuclear power plants, based on the general guidance given in the relevant sections of the 'Safety Code of Practice - Design' and the 'Safety Code of Practice - Operation' of the International Atomic Energy Agency. The guide will confine itself to fire protection of safety systems and items important to safety, leaving the non-safety matters of fire protection in nuclear power plants to be decided upon the basis of the various available national and international practices and regulations. (HP) [de

Fusion-Reactor-Safety Research Program. Annual report, Fiscal Year 1981

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1982-07-01

The report contains four sections: Outside Contracts includes the continuation of the General Atomic Co. low-activation materials safety study, water-cooled transport activation products study by Pacific Northwest Laboratory (PNL), studies of superconducting magnet safety conducted by Argonne National Laboratory (ANL) coupled with a new experimental superconducting magnet study program by Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety methodology work by MIT, portions of papers on lithium safety studies conducted at Hanford Engineering Development Laboratory (HEDL), and a new program to study tritium gas conversion to tritiated water at Oak Ridge National Laboratory (ORNL). The section EG and G idaho, Inc., Activities at INEL includes adaptations of papers of ongoing work in transient code development, tritium systems risk assessment, heat transfer activities, and a summary of a workshop on safety in design. A List of Publications and Proposed FY-82 Activities are also presented

The orthopaedic error index: development and application of a novel national indicator for assessing the relative safety of hospital care using a cross-sectional approach.

Science.gov (United States)

Panesar, Sukhmeet S; Netuveli, Gopalakrishnan; Carson-Stevens, Andrew; Javad, Sundas; Patel, Bhavesh; Parry, Gareth; Donaldson, Liam J; Sheikh, Aziz

2013-11-21

The Orthopaedic Error Index for hospitals aims to provide the first national assessment of the relative safety of provision of orthopaedic surgery. Cross-sectional study (retrospective analysis of records in a database). The National Reporting and Learning System is the largest national repository of patient-safety incidents in the world with over eight million error reports. It offers a unique opportunity to develop novel approaches to enhancing patient safety, including investigating the relative safety of different healthcare providers and specialties. We extracted all orthopaedic error reports from the system over 1 year (2009-2010). The Orthopaedic Error Index was calculated as a sum of the error propensity and severity. All relevant hospitals offering orthopaedic surgery in England were then ranked by this metric to identify possible outliers that warrant further attention. 155 hospitals reported 48 971 orthopaedic-related patient-safety incidents. The mean Orthopaedic Error Index was 7.09/year (SD 2.72); five hospitals were identified as outliers. Three of these units were specialist tertiary hospitals carrying out complex surgery; the remaining two outlier hospitals had unusually high Orthopaedic Error Indexes: mean 14.46 (SD 0.29) and 15.29 (SD 0.51), respectively. The Orthopaedic Error Index has enabled identification of hospitals that may be putting patients at disproportionate risk of orthopaedic-related iatrogenic harm and which therefore warrant further investigation. It provides the prototype of a summary index of harm to enable surveillance of unsafe care over time across institutions. Further validation and scrutiny of the method will be required to assess its potential to be extended to other hospital specialties in the UK and also internationally to other health systems that have comparable national databases of patient-safety incidents.

Preliminary study on improving safety culture in Malaysian nuclear industries

International Nuclear Information System (INIS)

Ibrahim, Sabariah Kader; Lee, Y. E.

2012-01-01

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed

Preliminary study on improving safety culture in Malaysian nuclear industries

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Sabariah Kader [KAIST, Daejeon (Korea, Republic of); Lee, Y. E. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2012-10-15

This paper presents preliminary study on safety culture and its implementation in Malaysian nuclear industries by realizing the importance of safety culture; identification of important safety culture attributes; safety culture assessment and the practices to incorporate the identified safety culture attributes in organization. The first section of this paper explains the terms and definitions related to safety culture. Second, for the realization of importance of safety culture in organization, the international operational experiences emphasizing the importance of safety culture are described. Third, important safety culture attributes which are frequently cited in literature are provided. Fourth, methods to assess safety culture in operating organization are described. Finally, the practices to enhance the safety culture in an organization are discussed.

Measures Taken by the Ottoman State against Shah İsmail's Attempts to Convert Anatolia to Shia

Directory of Open Access Journals (Sweden)

Yusuf Küçükdağ

2008-06-01

Full Text Available Shah Ismail, when he was sheikh of Safevi sect established by Sheikh Safiyuddin, Ismail’s grandfather, established Safevi State in Azerbaijan taking Tebriz as the center at the beginning of XVI th.century. The followers of Safevi Sect were Turcomen originated from Anatolia. They helped Shah Ismail to establish state. Shah Ismail depending on Turcomen followers attempted to annex Anotolia which was under Otoman domination in his new state’s territory. He sent his caliphs to Anatolia to propagandize his sect. They tried to convince Anatolion people about Safevi sect. Ottoman state which understand that the main purpose of Shah Ismail was not the speading of Safevi sect took military, political, economical and cultural measures. In the war between two states, Shah Ismail was defeated by Ottoman army in Caldıran (1514 The relationship of Safevi’s followers with Iran was prevented. In order to prevent economical growth of Safevi State, economical embargo was put. By helping the organization of Halvetiyye which has Safevi sect orijin but accept’ s ottoman state outhority the spread of Safevism was prevented. Turcomen in Anatolia become hopeless when Sheikh Ismail was defeated by I. Selim. Ottoman State does not extinct Safevism

Safety Culture Enhancement Project. Final Report. A Field Study on Approaches to Enhancement of Safety Culture

Energy Technology Data Exchange (ETDEWEB)

Lowe, Andrew; Hayward, Brent (Dedale Asia Pacific, Albert Park VIC 3206 (Australia))

2006-08-15

This report documents a study with the objective of enhancing safety culture in the Swedish nuclear power industry. A primary objective of this study was to ensure that the latest thinking on human factors principles was being recognised and applied by nuclear power operators as a means of ensuring optimal safety performance. The initial phase of the project was conducted as a pilot study, involving the senior management group at one Swedish nuclear power-producing site. The pilot study enabled the project methodology to be validated after which it was repeated at other Swedish nuclear power industry sites, providing a broad-ranging analysis of opportunities across the industry to enhance safety culture. The introduction to this report contains an overview of safety culture, explains the background to the project and sets out the project rationale and objectives. The methodology used for understanding and analysing the important safety culture issues at each nuclear power site is then described. This section begins with a summary of the processes used in the information gathering and data analysis stage. The six components of the Management Workshops conducted at each site are then described. These workshops used a series of presentations, interactive events and group exercises to: (a) provide feedback to site managers on the safety culture and safety leadership issues identified at their site, and (b) stimulate further safety thinking and provide 'take-away' information and leadership strategies that could be applied to promote safety culture improvements. Section 3, project Findings, contains the main observations and output from the project. These include: - a brief overview of aspects of the local industry operating context that impinge on safety culture; - a summary of strengths or positive attributes observed within the safety culture of the Swedish nuclear industry; - a set of identified opportunities for further improvement; - the aggregated

49 CFR 1106.4 - The Safety Integration Plan process.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false The Safety Integration Plan process. 1106.4 Section 1106.4 Transportation Other Regulations Relating to Transportation (Continued) SURFACE... CONSIDERATION OF SAFETY INTEGRATION PLANS IN CASES INVOLVING RAILROAD CONSOLIDATIONS, MERGERS, AND ACQUISITIONS...

46 CFR 115.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

...) The route specified on the Certificate of Inspection and the SOLAS Passenger Ship Safety Certificate... 46 Shipping 4 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 115.910 Section 115... MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND...

78 FR 56235 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-09-12

..., 2013 (Closed). Place: Embassy Suites, 1900 Diagonal Road, Alexandria, Virginia 22314, Telephone: (703... meeting will convene to address matters related to the conduct of Study Section business and for the study...

Nahid Sırrı Örik’in Romanlarında Aile

OpenAIRE

Sayar, Feyza

2013-01-01

In this study, The six novels of Nahid Sırrı Örik Kıskanmak, Yıldız Olmak Kolay mı?, Tersine Giden Yol, Gece Olmadan, Sultan Hamid Düşerken, Kozmopolitler were examined in terms of family approach. In the first section of the study, Nahid Sırrı Örik's life, art and works were mentioned. In the second section, generally novels in Turkish Literature which are on the subject of family were mentioned. In the third section, the plot is studied. In the fourth section family and in the fifth sect...

Predisposal management of radioactive waste. General safety requirements. Pt. 5

International Nuclear Information System (INIS)

2009-01-01

The objective of this Safety Requirements publication is to establish, the requirements that must be satisfied in the predisposal management of radioactive waste. This publication sets out the objectives, criteria and requirements for the protection of human health and the environment that apply to the siting, design, construction, commissioning, operation and shutdown of facilities for the predisposal management of radioactive waste, and the requirements that must be met to ensure the safety of such facilities and activities. This Safety Requirements publication applies to the predisposal management of radioactive waste of all types and covers all the steps in its management from its generation up to its disposal, including its processing (pretreatment, treatment and conditioning), storage and transport. Such waste may arise from the commissioning, operation and decommissioning of nuclear facilities; the use of radionuclides in medicine, industry, agriculture, research and education; the processing of materials that contain naturally occurring radionuclides; and the remediation of contaminated areas. The introduction of the document (Section 1) informs about its objective, scope and structure. The protection of human health and the environment is considered in Section 2 of this publication. Section 3 establishes requirements for the responsibilities associated with the predisposal management of radioactive waste. Requirements for the principal approaches to and the elements of the predisposal management of radioactive waste are established in Section 4. Section 5 establishes requirements for the safe development and operation of predisposal radioactive waste management facilities and safe conduct of activities. The Annex presents a discussion of the consistency of the safety requirements established in this publication with the fundamental safety principles

77 FR 62536 - National Advisory Committee on Occupational Safety and Health (NACOSH)

Science.gov (United States)

2012-10-15

... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2012-0019] National Advisory Committee on Occupational Safety and Health (NACOSH) AGENCY: Occupational Safety and... Section 7(a) of the Occupational Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651, 656) to advise...

Comparison of proton therapy treatment planning for head tumors with a pencil beam algorithm on dual and single energy CT images

Energy Technology Data Exchange (ETDEWEB)

Hudobivnik, Nace; Dedes, George; Parodi, Katia; Landry, Guillaume, E-mail: g.landry@lmu.de [Department of Medical Physics, Ludwig-Maximilians-University, Munich 85748 (Germany); Schwarz, Florian; Johnson, Thorsten; Sommer, Wieland H. [Institute for Clinical Radiology, Ludwig Maximilians University Hospital Munich, 81377 Munich (Germany); Agolli, Linda [Department of Radiation Oncology, Ludwig-Maximilians-University, Munich 81377, Germany and Radiation Oncology, Sant’ Andrea Hospital, Sapienza University, Rome 00189 (Italy); Tessonnier, Thomas [Department of Medical Physics, Ludwig-Maximilians-University, Munich 85748, Germany and Department of Radiation Oncology, Heidelberg University Hospital, Heidelberg (Germany); Verhaegen, Frank [Department of Radiation Oncology (MAASTRO), GROW School for Oncology and Developmental Biology, Maastricht 6229 ET, the Netherlands and Medical Physics Unit, Department of Oncology, McGill University, Montreal, Quebec H3A 0G4 (Canada); Thieke, Christian; Belka, Claus [Department of Radiation Oncology, Ludwig-Maximilians-University, Munich 81377 (Germany)

2016-01-15

Purpose: Dual energy CT (DECT) has recently been proposed as an improvement over single energy CT (SECT) for stopping power ratio (SPR) estimation for proton therapy treatment planning (TP), thereby potentially reducing range uncertainties. Published literature investigated phantoms. This study aims at performing proton therapy TP on SECT and DECT head images of the same patients and at evaluating whether the reported improved DECT SPR accuracy translates into clinically relevant range shifts in clinical head treatment scenarios. Methods: Two phantoms were scanned at a last generation dual source DECT scanner at 90 and 150 kVp with Sn filtration. The first phantom (Gammex phantom) was used to calibrate the scanner in terms of SPR while the second served as evaluation (CIRS phantom). DECT images of five head trauma patients were used as surrogate cancer patient images for TP of proton therapy. Pencil beam algorithm based TP was performed on SECT and DECT images and the dose distributions corresponding to the optimized proton plans were calculated using a Monte Carlo (MC) simulation platform using the same patient geometry for both plans obtained from conversion of the 150 kVp images. Range shifts between the MC dose distributions from SECT and DECT plans were assessed using 2D range maps. Results: SPR root mean square errors (RMSEs) for the inserts of the Gammex phantom were 1.9%, 1.8%, and 1.2% for SECT phantom calibration (SECT{sub phantom}), SECT stoichiometric calibration (SECT{sub stoichiometric}), and DECT calibration, respectively. For the CIRS phantom, these were 3.6%, 1.6%, and 1.0%. When investigating patient anatomy, group median range differences of up to −1.4% were observed for head cases when comparing SECT{sub stoichiometric} with DECT. For this calibration the 25th and 75th percentiles varied from −2% to 0% across the five patients. The group median was found to be limited to 0.5% when using SECT{sub phantom} and the 25th and 75th percentiles

46 CFR 61.30-20 - Automatic control and safety tests.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Automatic control and safety tests. 61.30-20 Section 61... TESTS AND INSPECTIONS Tests and Inspections of Fired Thermal Fluid Heaters § 61.30-20 Automatic control and safety tests. Operational tests and checks of all safety and limit controls, combustion controls...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on...

Definition and means of maintaining the process vacuum liquid detection interlock systems portion of the PFP safety envelope

International Nuclear Information System (INIS)

LINTHO, J.E.

2003-01-01

The purpose of this document is to record the technical evaluation of the Technical Safety Requirements described in the Plutonium Finishing Plant (PFP) Safety Technical Requirements, HNF-SD-CP-OSR-010/Rev.1, Section 3.1.1, ''Criticality Prevention System.'' This document also defines the Safety Envelope (SE) for the liquid detection interlock system in the Process Vacuum System. The SE is derived FR-om information in the Plutonium Finishing Plant Final Safety Analysis Report (PFP FSAR), HNF-SD-CP-SAR-021, Rev 4, and the Criticality Safety Analysis Report (CSAR) for the 26-inch Hg Vacuum System, WHC-SD-SQA-CSA-20159, Rev 0-A. This document, with its appendices, provides the following: (1) The system functional requirements for determining system operability (Section 3). (2) Evaluations of equipment to determine the safety envelope boundary for the system (Section 4 list of SE boundary drawings). (3) A list of the safety envelope equipment (Appendix B). (4) Functional requirements for the individual safety envelope equipment, including appropriate set points and process parameters (Section 4). (5) A list of the operational and surveillance procedures necessary to operate and maintain the system equipment within the safety envelope (Sections 5 and 6 and Appendix A)

NS [Nuclear Safety] update. Current safety and security activities and developments taking place in the Department of Nuclear Safety and Security. Issue no. 4, June 2007

International Nuclear Information System (INIS)

2007-04-01

This newsletter contains information on the Centre for Advanced Safety Assessment Tools (CASAT), the new strategy for the recovery of radioactive sources, the Technical Support Organization Conference and a message form the Director of the Division of Nuclear Installation Safety. To improve the efficiency of safety assessment methods, ensure transparency in their validation and application and establish an excellent knowledge base and training programmes, the IAEA's Centre for Advanced Safety Assessment Tools (CASAT) has therefore been formed. The Centre addresses the need for continuous technical support mechanisms for safety assessment methods. It provides support to Member States to enhance their safety assessment capabilities for present and future generations of nuclear systems, with a special focus on countries with a developing nuclear technology and nuclear safety infrastructure. It serves as a consolidated repository of relevant safety analysis knowledge, provides for focused training including advanced analytical simulations, and supports collaboration on safety assessment projects among Member States. The resources provided through CASAT include codes, models, databases, verification and validation information, analytical procedures and guides. The main purpose of the recently established Radioactive Source Technical Coordination Group (RSTCG) is to facilitate the technical coordination of activities of the IAEA related to the control and management of radioactive sources through the development of common approaches in technical matters and to advise the management of the relevant Divisions. It is the task of the RSTCG to provide the programme managers of the participating divisions/sections with a common opinion/advice on technical issues related to the control and management of radioactive sources. The RSTCG members obtain, inter alia from programme managers, information on all relevant project proposals, and share relevant materials in due time to

Review and assessment of nuclear facilities by the regulatory body. Safety guide

International Nuclear Information System (INIS)

2004-01-01

The purpose of this Safety Guide is to provide recommendations for regulatory bodies on reviewing and assessing the various safety related submissions made by the operator of a nuclear facility at different stages (siting, design, construction, commissioning, operation and decommissioning or closure) in the facility's lifetime to determine whether the facility complies with the applicable safety objectives and requirements. This Safety Guide covers the review and assessment of submissions in relation to the safety of nuclear facilities such as: enrichment and fuel manufacturing plants. Nuclear power plants. Other reactors such as research reactors and critical assemblies. Spent fuel reprocessing plants. And facilities for radioactive waste management, such as treatment, storage and disposal facilities. This Safety Guide also covers issues relating to the decommissioning of nuclear facilities, the closure of waste disposal facilities and site rehabilitation. Objectives, management, planning and organizational matters relating to the review and assessment process are presented in Section 2. Section 3 deals with the bases for decision making and conduct of the review and assessment process. Section 4 covers aspects relating to the assessment of this process. The Appendix provides a generic list of topics to be covered in the review and assessment process

Review and assessment of nuclear facilities by the regulatory body. Safety guide

International Nuclear Information System (INIS)

2005-01-01

The purpose of this Safety Guide is to provide recommendations for regulatory bodies on reviewing and assessing the various safety related submissions made by the operator of a nuclear facility at different stages (siting, design, construction, commissioning, operation and decommissioning or closure) in the facility's lifetime to determine whether the facility complies with the applicable safety objectives and requirements. This Safety Guide covers the review and assessment of submissions in relation to the safety of nuclear facilities such as: enrichment and fuel manufacturing plants. Nuclear power plants. Other reactors such as research reactors and critical assemblies. Spent fuel reprocessing plants. And facilities for radioactive waste management, such as treatment, storage and disposal facilities. This Safety Guide also covers issues relating to the decommissioning of nuclear facilities, the closure of waste disposal facilities and site rehabilitation. Objectives, management, planning and organizational matters relating to the review and assessment process are presented in Section 2. Section 3 deals with the bases for decision making and conduct of the review and assessment process. Section 4 covers aspects relating to the assessment of this process. The Appendix provides a generic list of topics to be covered in the review and assessment process

32 CFR 234.17 - Vehicles and traffic safety.

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Vehicles and traffic safety. 234.17 Section 234...) MISCELLANEOUS CONDUCT ON THE PENTAGON RESERVATION § 234.17 Vehicles and traffic safety. (a) In general. Unless... an alcoholic beverage. (1) Each person within a vehicle is responsible for complying with the...

32 CFR 1903.4 - Vehicles and traffic safety.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Vehicles and traffic safety. 1903.4 Section 1903... CONDUCT ON AGENCY INSTALLATIONS § 1903.4 Vehicles and traffic safety. (a) Open container of alcoholic beverage. (1) Each person within the vehicle is responsible for complying with the provisions of this...

29 CFR 1960.11 - Evaluation of occupational safety and health performance.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Evaluation of occupational safety and health performance. 1960.11 Section 1960.11 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.11 Evaluation of occupational safety and...

Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2005-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel. That is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes

Recruitment, qualification and training of personnel for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The objective of this Safety Guide is to outline the various factors that should to be considered in order to ensure that the operating organization has a sufficient number of qualified personnel for safe operation of a nuclear power plant. In particular, the objective of this publication is to provide general recommendations on the recruitment and selection of plant personnel and on the training and qualification practices that have been adopted in the nuclear industry since the predecessor Safety Guide was published in 1991. In addition, this Safety Guide seeks to establish a framework for ensuring that all managers and staff employed at a nuclear power plant demonstrate their commitment to the management of safety to high professional standards. This Safety Guide deals specifically with those aspects of qualification and training that are important to the safe operation of nuclear power plants. It provides recommendations on the recruitment, selection, qualification, training and authorization of plant personnel; that is, of all personnel in all safety related functions and at all levels of the plant. Some parts or all of this Safety Guide may also be used, with due adaptation, as a guide to the recruitment, selection, training and qualification of staff for other nuclear installations (such as research reactors or nuclear fuel cycle facilities). Section 2 gives guidance on the recruitment and selection of suitable personnel for a nuclear power plant. Section 3 gives guidance on the establishment of personnel qualification, explains the relationship between qualification and competence, and identifies how competence may be developed through education, experience and training. Section 4 deals with general aspects of the training policy for nuclear power plant personnel: the systematic approach, training settings and methods, initial and continuing training, and the keeping of training records. Section 5 provides guidance on the main aspects of training programmes

Are measurements of patient safety culture and adverse events valid and reliable? Results from a cross sectional study.