Bridging the Divide between Safety and Risk Management for your Project or Program

Science.gov (United States)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

A model for managing cold-related health and safety risks at workplaces.

Science.gov (United States)

Risikko, Tanja; Mäkinen, Tiina M; Påsche, Arvid; Toivonen, Liisa; Hassi, Juhani

2003-05-01

Cold conditions increase health and safety risks at work in several ways. The effects of cold have not been sufficiently taken into consideration in occupational safety and health practices. A systematic model and methods were developed for managing cold-related health and safety risks at workplaces. The development work was performed, in a context-bound manner, in pilot industries and workplaces. The model can be integrated into the company's occupational health and safety management system, such as OHSAS 18001. The cold risks are identified and assessed by using a checklist. The preventive measures are systematically planned in a written form specifically produced for cold workplaces. It includes the organisational and technical preventive measures, protective clothing and personal protective equipment, as well as training and information of the personnel. According to the model, all the workers, foremen, occupational safety personnel and occupational health care personnel are trained to recognise the cold risks and to conduct preventive actions. The developed model was evaluated in the context of cold outdoor (construction) and indoor work (fish processing), and by occupational health and safety professionals. According to the feedback, the model and methods were easy to use after a one-day introduction session. The continuum between the cold risk assessment and management worked well, although there was some overlap in the documentation. The cold risk management model and its methods form an essential part of ISO CD 15743 Strategy for risk assessment, management and work practice in cold environments.

Integrating risk management and safety culture in a framework for risk informed decision making

International Nuclear Information System (INIS)

Nelson, W.R.

2009-01-01

Operators and regulators of nuclear power plants agree on the importance of maintaining safety and controlling accident risks. Effective safety and risk management requires treatment of both technical and organizational components. Probabilistic Risk Assessment (PRA) provides tools for technical risk management. However, organizational factors are not treated in PRA, but are addressed using different approaches. To bring both components together, a framework of Risk Informed Decision Making (RIDM) is needed. The objective tree structure of the International Atomic Energy Agency (IAEA) is a promising approach to combine both elements. Effective collaboration involving regulatory and industry groups is needed to accomplish the integration. (author)

Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

Science.gov (United States)

Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

2017-07-01

Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

Workplace road safety risk management: An investigation into Australian practices.

Science.gov (United States)

Warmerdam, Amanda; Newnam, Sharon; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

2017-01-01

In Australia, more than 30% of the traffic volume can be attributed to work-related vehicles. Although work-related driver safety has been given increasing attention in the scientific literature, it is uncertain how well this knowledge has been translated into practice in industry. It is also unclear how current practice in industry can inform scientific knowledge. The aim of the research was to use a benchmarking tool developed by the National Road Safety Partnership Program to assess industry maturity in relation to risk management practices. A total of 83 managers from a range of small, medium and large organisations were recruited through the Victorian Work Authority. Semi-structured interviews aimed at eliciting information on current organisational practices, as well as policy and procedures around work-related driving were conducted and the data mapped onto the benchmarking tool. Overall, the results demonstrated varying levels of maturity of risk management practices across organisations, highlighting the need to build accountability within organisations, improve communication practices, improve journey management, reduce vehicle-related risk, improve driver competency through an effective workplace road safety management program and review organisational incident and infringement management. The findings of the study have important implications for industry and highlight the need to review current risk management practices. Copyright © 2016 Elsevier Ltd. All rights reserved.

Protection of environment, health and safety using risk management

Energy Technology Data Exchange (ETDEWEB)

Abraham, G [Ghafari Associates, Inc. 17101 Michegan Avenue Dearborn, MI 48126-2736 (United States); Kummler, R H [Department of Chemical engineering Wayne Stae University Detroit, MI 48202 (United States); louvar, J [Research Services Basf Corporation Wyandotte, MI 48192 (United States)

1997-12-31

Section 304 of the 1990 clean air amendments (CAAA) directed the US occupational safety and health administration (OSFA) to develop a chemical process safety standard to protect workers on-site from accidents involving hazardous substances. OSHA issued 29 CFR 1910.119, process safety management of Highly hazardous chemicals (PSM) in 1992. Section 112 r of the CAAA further mandated that a standard be developed to protect the environment from accidental releases of hazardous substances. The US environmental protection agency (EPA) proposed such a standard in 1993 (58 Fr 54190) and revised their proposal in 1995). The final rule for risk management and accidental release prevention is more comprehensive and extensive than OSHA`s PSM standard. In this paper we will discuss the concepts of both programs, the classes of substances that would trigger a facility`s need for compliance and review the regulations for risk management.

Protection of environment, health and safety using risk management

International Nuclear Information System (INIS)

Abraham, G.; Kummler, R.H.; louvar, J.

1996-01-01

Section 304 of the 1990 clean air amendments (CAAA) directed the US occupational safety and health administration (OSFA) to develop a chemical process safety standard to protect workers on-site from accidents involving hazardous substances. OSHA issued 29 CFR 1910.119, process safety management of Highly hazardous chemicals (PSM) in 1992. Section 112 r of the CAAA further mandated that a standard be developed to protect the environment from accidental releases of hazardous substances. The US environmental protection agency (EPA) proposed such a standard in 1993 (58 Fr 54190) and revised their proposal in 1995). The final rule for risk management and accidental release prevention is more comprehensive and extensive than OSHA's PSM standard. In this paper we will discuss the concepts of both programs, the classes of substances that would trigger a facility's need for compliance and review the regulations for risk management

Outage Risk Assessment and Management (ORAM) technology to improve outage safety and economics

International Nuclear Information System (INIS)

Kalra, S.P.

2004-01-01

The Electric Power Research Institute (EPRI) has undertaken an aggressive program, called ORAM (Outage Risk Assessment and Management), to provide utilities with tools and technology to assist in managing risk during the planning and conduct of outages. The ORAM program consists of the following 6 steps: i) Perform utility surveys and visits on shutdown risk management needs, ii) Perform probabilistic shutdown safety assessments (PSSAs) to identify generic insights that can be incorporated into risk management guidelines and identify selected areas for the development of contingency actions, iii) Develop risk management guidelines (RMG's) that provide a systematic approach to the planning and conduct of outages from a safety perspective. Incorporate insights from the shutdown safety assessments and other operating experience into the RMG's. iv) Develop selected contingency actions including a thermalhydraulic tool kit to address higher risk time periods and activities identified in the shutdown safety assessments, v) Develop computer software that integrates all of the above capability into an easy to use tool for effective shutdown operation management for utilities, vi) Provide assistance in the transfer of this technology and the application of these tools. This paper briefly describes the technical approach and tools developed under EPRI's ORAM program and its applications for improving outage safety and economics. (author)

75 FR 23782 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

Science.gov (United States)

2010-05-04

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide...

Risk management for existing energy facilities. A global approach to numerical safety goals

International Nuclear Information System (INIS)

Pate-Cornell, M.E.

1993-01-01

This paper presents a structured set of numerical safety goals for risk management of existing energy facilities. The rationale behind these safety goals is based on principles of equity and economic efficiency. Some of the issues involved when using probabilistic risk analyses results for safety decisions are discussed. A brief review of existing safety targets and open-quotes floating numbersclose quotes is presented, and a set of safety goals for industrial risk management is proposed. Relaxation of these standards for existing facilities, the relevance of the lifetime of the plant, the treatment of uncertainties, and problems of failure dependencies are discussed briefly. 17 refs., 1 fig

Nursing involvement in risk and patient safety management in Primary Care.

Science.gov (United States)

Coronado-Vázquez, Valle; García-López, Ana; López-Sauras, Susana; Turón Alcaine, José María

Patient safety and quality of care in a highly complex healthcare system depends not only on the actions of professionals at an individual level, but also on interaction with the environment. Proactive risk management in the system to prevent incidents and activities targeting healthcare teams is crucial in establishing a culture of safety in centres. Nurses commonly lead these safety strategies. Even though safety incidents are relatively infrequent in primary care, since the majority are preventable, actions at this level of care are highly effective. Certification of services according to ISO standard 9001:2008 focuses on risk management in the system and its use in certifying healthcare centres is helping to build a safety culture amongst professionals. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Application of a risk management system to improve drinking water safety.

Science.gov (United States)

Jayaratne, Asoka

2008-12-01

The use of a comprehensive risk management framework is considered a very effective means of managing water quality risks. There are many risk-based systems available to water utilities such as ISO 9001 and Hazard Analysis and Critical Control Point (HACCP). In 2004, the World Health Organization's (WHO) Guidelines for Drinking Water Quality recommended the use of preventive risk management approaches to manage water quality risks. This paper describes the framework adopted by Yarra Valley Water for the development of its Drinking Water Quality Risk Management Plan incorporating HACCP and ISO 9001 systems and demonstrates benefits of Water Safety Plans such as HACCP. Copyright IWA Publishing 2008.

Managing risk in healthcare: understanding your safety culture using the Manchester Patient Safety Framework (MaPSaF).

Science.gov (United States)

Parker, Dianne

2009-03-01

To provide sufficient information about the Manchester Patient Safety Framework (MaPSaF) to allow healthcare professionals to assess its potential usefulness. The assessment of safety culture is an important aspect of risk management, and one in which there is increasing interest among healthcare organizations. Manchester Patient Safety Framework offers a theory-based framework for assessing safety culture, designed specifically for use in the NHS. The framework covers multiple dimensions of safety culture, and five levels of safety culture development. This allows the generation of a profile of an organization's safety culture in terms of areas of relative strength and challenge, which can be used to identify focus issues for change and improvement. Manchester Patient Safety Framework provides a useful method for engaging healthcare professionals in assessing and improving the safety culture in their organization, as part of a programme of risk management.

Remodeling Strategic Staff Safety and Security Risks Management in Nigerian Tertiary Institutions

Directory of Open Access Journals (Sweden)

Sunday S. AKPAN

2015-10-01

Full Text Available This paper examined safety and security risk management in tertiary institutions in Nigeria. The frequent attacks at workplace, especially schools, have placed safety and security in the front burner of discussion in both business and political circles. This therefore, forms the imperative for the conduct of this study. The work adopted a cross sectional survey research design and collected data from respondents who are security personnel of the University of Uyo. Analysis of data was done with simple percentage statistics while the research hypotheses were tested with mean and simple regression and correlation statistics. The findings of the study revealed that assassination, kidnappings and bombings were principal risk incidents threatening the safety and security of staff in University of Uyo. A significant positive relationship was found between the funding of security management and workers’ performance. It was discovered specifically that employment screening, regular training of security personnel, regular safety and security meetings and strategic security policy formation were the main strategies for managing safety and security in University of Uyo. The paper concluded that safety and security management and control involves every worker (management and staff of University of Uyo. It was recommended, among others, that management should be more committed to safety and security management in the University by means of making safety and security issues an integral part of University’s strategic plan and also by adopting the management line model – one form of management structure-where safety and security are located, with other general management responsibilities. This way, the resurgent cases of kidnapping, hired assassination, etc. would be reduced if not completely eradicated in the University.

Risk management and safety culture

International Nuclear Information System (INIS)

Takano, K.

2007-01-01

Paper informs on the efforts to elaborate a feedback system for risk comprehensive evaluation and a system to improve structure safety foreseeing the possibility to control the latent risk, ensuring the qualitative evaluation of the safety level and improvement of safety culture in various branches of industry, first and foremost, in the electricity producing sector including the nuclear power industry [ru

Risk management in a humanitarian context - how can the application of risk management activities to initial registration in Dadaab increase societal safety?

OpenAIRE

Nodland, Jeanneth

2011-01-01

Master's thesis in Risk management and societal safety The aim of this thesis is to establish the relationship between initial registration and societal safety, to make the reader aware of how the UNHCR in Dadaab is conducting initial registration, and to show that the application of risk management activities on camp management activities can increase the reliability of an operation. The thesis will show that the identification of vulnerabilities embedded within a system, and implementing...

Bowtie Risk Management methodology and Modern Nuclear Safety Reports

International Nuclear Information System (INIS)

Ilizastigui Pérez, F.

2016-01-01

The Safety Report (SR) plays a crucial role within the nuclear licensing regime as the principal means for demonstrating the adequacy of safety analysis for a nuclear facility to ensure that it can be constructed, operated, maintained, shut down, and decommissioned safely and in compliance with applicable laws and regulations. It serves as the basis for granting authorizations for the commencement of the main stages of the facility’s life cycle as well as decision-making processes related to safety. Historically, the majority of nuclear safety reports have operated under rather prescriptive regimes, with emphasis placed on demonstrations of the robustness of the facility’s design (design safety) against prescriptive technical requirements set by the regulatory body, and less attention paid to demonstrating the adequacy and effectiveness of Operator’s management system for managing risks to daily operation.

RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

OpenAIRE

V. A. Nikolayev

2012-01-01

Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

75 FR 17417 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Science.gov (United States)

2010-04-06

...] Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory... Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory Committee. This meeting was... Drug Safety and Risk Management Advisory Committee would be held on May 12, 2010. On page 10490, in the...

Human health and safety risks management in underground coal mines using fuzzy TOPSIS

Energy Technology Data Exchange (ETDEWEB)

Mahdevari, Satar, E-mail: satar.mahdevari@aut.ac.ir [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Shahriar, Kourosh [Department of Mining and Metallurgical Engineering, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Esfahanipour, Akbar [Industrial Engineering Department, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of)

2014-08-01

The scrutiny of health and safety of personnel working in underground coal mines is heightened because of fatalities and disasters that occur every year worldwide. A methodology based on fuzzy TOPSIS was proposed to assess the risks associated with human health in order to manage control measures and support decision-making, which could provide the right balance between different concerns, such as safety and costs. For this purpose, information collected from three hazardous coal mines namely Hashouni, Hojedk and Babnizu located at the Kerman coal deposit, Iran, were used to manage the risks affecting the health and safety of their miners. Altogether 86 hazards were identified and classified under eight categories: geomechanical, geochemical, electrical, mechanical, chemical, environmental, personal, and social, cultural and managerial risks. Overcoming the uncertainty of qualitative data, the ranking process is accomplished by fuzzy TOPSIS. After running the model, twelve groups with different risks were obtained. Located in the first group, the most important risks with the highest negative effects are: materials falling, catastrophic failure, instability of coalface and immediate roof, firedamp explosion, gas emission, misfire, stopping of ventilation system, wagon separation at inclines, asphyxiation, inadequate training and poor site management system. According to the results, the proposed methodology can be a reliable technique for management of the minatory hazards and coping with uncertainties affecting the health and safety of miners when performance ratings are imprecise. The proposed model can be primarily designed to identify potential hazards and help in taking appropriate measures to minimize or remove the risks before accidents can occur. - Highlights: • Risks associated with health and safety of coal miners were investigated. • A reliable methodology based on Fuzzy TOPSIS was developed to manage the risks. • Three underground mines in Kerman

Human health and safety risks management in underground coal mines using fuzzy TOPSIS

International Nuclear Information System (INIS)

Mahdevari, Satar; Shahriar, Kourosh; Esfahanipour, Akbar

2014-01-01

The scrutiny of health and safety of personnel working in underground coal mines is heightened because of fatalities and disasters that occur every year worldwide. A methodology based on fuzzy TOPSIS was proposed to assess the risks associated with human health in order to manage control measures and support decision-making, which could provide the right balance between different concerns, such as safety and costs. For this purpose, information collected from three hazardous coal mines namely Hashouni, Hojedk and Babnizu located at the Kerman coal deposit, Iran, were used to manage the risks affecting the health and safety of their miners. Altogether 86 hazards were identified and classified under eight categories: geomechanical, geochemical, electrical, mechanical, chemical, environmental, personal, and social, cultural and managerial risks. Overcoming the uncertainty of qualitative data, the ranking process is accomplished by fuzzy TOPSIS. After running the model, twelve groups with different risks were obtained. Located in the first group, the most important risks with the highest negative effects are: materials falling, catastrophic failure, instability of coalface and immediate roof, firedamp explosion, gas emission, misfire, stopping of ventilation system, wagon separation at inclines, asphyxiation, inadequate training and poor site management system. According to the results, the proposed methodology can be a reliable technique for management of the minatory hazards and coping with uncertainties affecting the health and safety of miners when performance ratings are imprecise. The proposed model can be primarily designed to identify potential hazards and help in taking appropriate measures to minimize or remove the risks before accidents can occur. - Highlights: • Risks associated with health and safety of coal miners were investigated. • A reliable methodology based on Fuzzy TOPSIS was developed to manage the risks. • Three underground mines in Kerman

RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

Directory of Open Access Journals (Sweden)

V. A. Nikolayev

2012-01-01

Full Text Available Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

OpenAIRE

Akwu, Ifeoma Claris

2017-01-01

The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

Waste management safety

International Nuclear Information System (INIS)

Boehm, H.

1983-01-01

All studies carried out by competent authors of the safety of a waste management concept on the basis of reprocessing of the spent fuel elements and storage in the deep underground of the radioactive waste show that only a minor technical risk is involved in this step. This also holds true when evaluating the accidents which have occurred in waste management facilities. To explain the risk, first the completely different safety aspects of nuclear power plants, reprocessing plants and repositories are outlined together with the safety related characteristics of these plants. Also this comparison indicates that the risk of waste management facilities is considerably lower than the, already very small, risk of nuclear power plants. For the final storage of waste from reprocessing and for the direct storage of fuel elements, the results of safety analyses show that the radiological exposure following an accident with radioactivity releases, even under conservative assumptions, is considerably below the natural radiation exposure. The very small danger to the environment arising from waste management by reprocessing clearly indicates that aspects of technical safety alone will hardly be a major criterion for the decision in favor of one or the other waste management approach. (orig.) [de

Proactive safety management in health care : towards a broader view of risk analysis, error recovery, and safety culture

NARCIS (Netherlands)

Habraken, M.M.P.

2010-01-01

Medical errors occur frequently. The harm and additional costs associated with those errors ask for effective safety management. According to the objective of minimal patient harm, safety management in health care should be proactive; that is, risks should be anticipated and reduced before patients

76 FR 63929 - Joint Meeting of the Drug Safety and Risk Management Advisory Committee and the Dermatologic and...

Science.gov (United States)

2011-10-14

...] Joint Meeting of the Drug Safety and Risk Management Advisory Committee and the Dermatologic and... Administration (FDA). The meeting will be open to the public. Name of Committees: Drug Safety and Risk Management... Safe Use (ETASU) before its Drug Safety and Risk Management Advisory Committee (DSaRM). On December 1...

Management of safety and risk at the HFIR [High-Flux Isotope Reactor

International Nuclear Information System (INIS)

Glovier, H.A.

1990-01-01

This paper discusses the management of safety and risk at the High-Flux Isotope Reactor (HFIR), a category A research reactor at Oak Ridge National Laboratory (ORNL). The HFIR went critical in 1966 and operated at its designed 100 MW for 20 yr until it was shut down on November 14, 1986. It operated at a >90% availability and without significant event during this period. The result was a complacent management program lacking rigor. This complacency came to an end with the Chernobyl accident, which led to the appointment of an internal committee to assess the safety of ORNL reactor operations. This committee found that HFIR pressure vessel material specimens removed several years earlier had not been analyzed. This issue led to a general review of management practices that were found lacking in quality assurance, safety documentation, training process, and emergency planning, among others. Management accountability was lacking, as shown by design basis and safety analyses that were not up to data and by the fact that reactor operators whose requalification examinations had not been graded were allowed to continue operating the reactor over a long period of time. Between shutdown in 1986 and restart in April 1989, significant management changes and initiatives were made in the area of risk and safety management of ORNL reactors. These are presented briefly in this paper

Clinical risk management and patient safety education for nurses: a critique.

Science.gov (United States)

Johnstone, Megan-Jane; Kanitsaki, Olga

2007-04-01

Nurses have a pivotal role to play in clinical risk management (CRM) and promoting patient safety in health care domains. Accordingly, nurses need to be prepared educationally to manage clinical risk effectively when delivering patient care. Just what form the CRM and safety education of nurses should take, however, remains an open question. A recent search of the literature has revealed a surprising lack of evidence substantiating models of effective CRM and safety education for nurses. In this paper, a critical discussion is advanced on the question of CRM and safety education for nurses and the need for nurse education in this area to be reviewed and systematically researched as a strategic priority, nationally and internationally. It is a key contention of this paper that without 'good' safety education research it will not be possible to ensure that the educational programs that are being offered to nurses in this area are evidence-based and designed in a manner that will enable nurses to develop the capabilities they need to respond effectively to the multifaceted and complex demands that are inherent in their ethical and professional responsibilities to promote and protect patient safety and quality care in health care domains.

Road Infrastructure Safety Management in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Risk Management: Earning Recognition with an Automated Safety Program

Science.gov (United States)

Lansberry, Linden; Strasburger, Tom

2012-01-01

Risk management is a huge task that requires diligent oversight to avoid penalties, fines, or lawsuits. Add in the burden of limited resources that schools face today, and the challenge of meeting the required training, reporting, compliance, and other administrative issues associated with a safety program is almost insurmountable. Despite an…

Knowledge management and safety compliance in a high-risk distributed organizational system.

Science.gov (United States)

Gressgård, Leif Jarle

2014-06-01

In a safety perspective, efficient knowledge management is important for learning purposes and thus to prevent errors from occurring repeatedly. The relationship between knowledge exchange among employees and safety behavior may be of particular importance in distributed organizational systems where similar high-risk activities take place at several locations. This study develops and tests hypotheses concerning the relationship between knowledge exchange systems usage, knowledge exchange in the organizational system, and safety compliance. The operational context of the study is petroleum drilling and well operations involving distributed high-risk activities. The hypotheses are tested by use of survey data collected from a large petroleum operator company and eight of its main contractors. The results show that safety compliance is influenced by use of knowledge exchange systems and degree of knowledge exchange in the organizational system, both within and between units. System usage is the most important predictor, and safety compliance seems to be more strongly related to knowledge exchange within units than knowledge exchange between units. Overall, the study shows that knowledge management is central for safety behavior.

Risk perception, risk management and safety assessment: what can governments do to increase public confidence in their vaccine system?

Science.gov (United States)

MacDonald, Noni E; Smith, Jennifer; Appleton, Mary

2012-09-01

For decades vaccine program managers and governments have devoted many resources to addressing public vaccine concerns, vaccine risk perception, risk management and safety assessment. Despite ever growing evidence that vaccines are safe and effective, public concerns continue. Education and evidence based scientific messages have not ended concerns. How can governments and programs more effectively address the public's vaccine concerns and increase confidence in the vaccine safety system? Vaccination hesitation has been attributed to concerns about vaccine safety, perceptions of high vaccine risks and low disease risk and consequences. Even when the public believes vaccines are important for protection many still have concerns about vaccine safety. This overview explores how heuristics affect public perception of vaccines and vaccine safety, how the public finds and uses vaccine information, and then proposes strategies for changes in the approach to vaccine safety communications. Facts and evidence confirming the safety of vaccines are not enough. Vaccine beliefs and behaviours must be shaped. This will require a shift in the what, when, how and why of vaccine risk and benefit communication content and practice. A change to a behavioural change strategy such as the WHO COMBI program that has been applied to disease eradication efforts is suggested. Copyright © 2011. Published by Elsevier Ltd.. All rights reserved.

Gun Safety Management with Patients at Risk for Suicide

Science.gov (United States)

Simon, Robert I.

2007-01-01

Guns in the home are associated with a five-fold increase in suicide. All patients at risk for suicide must be asked if guns are available at home or easily accessible elsewhere, or if they have intent to buy or purchase a gun. Gun safety management requires a collaborative team approach including the clinician, patient, and designated person…

Safety in psychiatric inpatient care: The impact of risk management culture on mental health nursing practice.

Science.gov (United States)

Slemon, Allie; Jenkins, Emily; Bungay, Vicky

2017-10-01

The discourse of safety has informed the care of individuals with mental illness through institutionalization and into modern psychiatric nursing practices. Confinement arose from safety: out of both societal stigma and fear for public safety, as well as benevolently paternalistic aims to protect individuals from self-harm. In this paper, we argue that within current psychiatric inpatient environments, safety is maintained as the predominant value, and risk management is the cornerstone of nursing care. Practices that accord with this value are legitimized and perpetuated through the safety discourse, despite evidence refuting their efficacy, and patient perspectives demonstrating harm. To illustrate this growing concern in mental health nursing care, we provide four exemplars of risk management strategies utilized in psychiatric inpatient settings: close observations, seclusion, door locking and defensive nursing practice. The use of these strategies demonstrates the necessity to shift perspectives on safety and risk in nursing care. We suggest that to re-centre meaningful support and treatment of clients, nurses should provide individualized, flexible care that incorporates safety measures while also fundamentally re-evaluating the risk management culture that gives rise to and legitimizes harmful practices. © 2017 The Authors Nursing Inquiry published by John Wiley & Sons Ltd.

SafetyBarrierManager, a software tool to perform risk analysis using ARAMIS's principles

DEFF Research Database (Denmark)

Duijm, Nijs Jan

2017-01-01

of the ARAMIS project, Risø National Laboratory started developing a tool that could implement these methodologies, leading to SafetyBarrierManager. The tool is based on the principles of “safety‐barrier diagrams”, which are very similar to “bowties”, with the possibility of performing quantitative analysis......The ARAMIS project resulted in a number of methodologies, dealing with among others: the development of standard fault trees and “bowties”; the identification and classification of safety barriers; and including the quality of safety management into the quantified risk assessment. After conclusion....... The tool allows constructing comprehensive fault trees, event trees and safety‐barrier diagrams. The tool implements the ARAMIS idea of a set of safety barrier types, to which a number of safety management issues can be linked. By rating the quality of these management issues, the operational probability...

[Endorsement of risk management and patient safety by certification of conformity in health care quality assessment].

Science.gov (United States)

Waßmuth, Ralf

2015-01-01

Certification of conformity in health care should provide assurance of compliance with quality standards. This also includes risk management and patient safety. Based on a comprehensive definition of quality, beneficial effects on the management of risks and the enhancement of patient safety can be expected from certification of conformity. While these effects have strong face validity, they are currently not sufficiently supported by evidence from health care research. Whether this relates to a lack of evidence or a lack of investigation remains open. Advancing safety culture and "climate", as well as learning from adverse events rely in part on quality management and are at least in part reflected in the certification of healthcare quality. However, again, evidence of the effectiveness of such measures is limited. Moreover, additional factors related to personality, attitude and proactive action of healthcare professionals are crucial factors in advancing risk management and patient safety which are currently not adequately reflected in certification of conformity programs.

An Autopsy Checklist: A Monitor of Safety and Risk Management.

Science.gov (United States)

Shkrum, Michael James; Kent, Jessica

2016-09-01

Any autopsy has safety and risk management issues, which can arise in the preautopsy, autopsy, and postautopsy phases. The London Health Sciences Department of Pathology and Laboratory Medicine Autopsy Checklist was developed to address these issues. The current study assessed 1 measure of autopsy safety: the effectiveness of the checklist in documenting pathologists' communication of the actual or potential risk of blood-borne infections to support staff. Autopsy checklists for cases done in 2012 and 2013 were reviewed. The frequency of communication, as recorded in checklists, by pathologists to staff of previously diagnosed blood-borne infections (hepatitis B/C and human immunodeficiency virus) or the risk of infection based on lifestyle (eg, intravenous drug abuse) was tabulated. These data were compared with medical histories of the deceased and circumstances of their deaths described in the final autopsy reports. Information about blood-borne infections was recorded less frequently in the checklists compared with the final reports. Of 4 known human immunodeficiency virus cases, there was no checklist documentation in 3. All 11 hand injuries were documented. None of these cases had known infectious risks. The Autopsy Checklist is a standardized means of documenting safety and risk issues arising during the autopsy process, but its effectiveness relies on accurate completion.

Safe patient care - safety culture and risk management in otorhinolaryngology.

Science.gov (United States)

St Pierre, Michael

2013-12-13

Safety culture is positioned at the heart of an organization's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organization's maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organization's safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality. Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate stimulation based team trainings into their

[Safe patient care: safety culture and risk management in otorhinolaryngology].

Science.gov (United States)

St Pierre, M

2013-04-01

Safety culture is positioned at the heart of an organisation's vulnerability to error because of its role in framing organizational awareness to risk and in providing and sustaining effective strategies of risk management. Safety related attitudes of leadership and management play a crucial role in the development of a mature safety culture ("top-down process"). A type marker for organizational culture and thus a predictor for an organizations maturity in respect to safety is information flow and in particular an organization's general way of coping with information that suggests anomaly. As all values and beliefs, relationships, learning, and other aspects of organizational safety culture are about sharing and processing information, safety culture has been termed "informed culture". An informed culture is free of blame and open for information provided by incidents. "Incident reporting systems" are the backbone of a reporting culture, where good information flow is likely to support and encourage other kinds of cooperative behavior, such as problem solving, innovation, and inter-departmental bridging. Another facet of an informed culture is the free flow of information during perioperative patient care. The World Health Organisation's "safe surgery checklist" is the most prevalent example of a standardized information exchange aimed at preventing patient harm due to information deficit. In routine tasks mandatory standard operating procedures have gained widespread acceptance in guaranteeing the highest possible process quality.Technical and non-technical skills of healthcare professionals are the decisive human resource for an efficient and safe delivery of patient care and the avoidance of errors. The systematic enhancement of staff qualification by providing training opportunities can be a major investment in patient safety. In recent years several otorhinolaryngology departments have started to incorporate simulation based team trainings into their curriculum

Mastery of risks and operating safety, risks and efficiencies

International Nuclear Information System (INIS)

2006-01-01

A proper management of ones risks consists in acting to exert prevention and protection capacities against the negative consequences of an event, but also by committing oneself into an offensive approach allowing to improve efficiency, quality and availability. Safety and efficiencies are mutual reinforcing goals aiming at ensuring the perenniality of industries and services. The implementation of a risk management approach in an industrial environment allows to reach a better reactiveness and to increase the efficiency of a system by the mastery of organization and processes. The activities in concern are those of industries and services: transports, energy and environment, automotive industry, petrochemistry, chemistry, food, space, health, defense industries, telecommunication, mining industry, information systems, textile industry, finances.. The topics approached during this meeting treat of: the relevance of risk-abatement resources with respect to risks criticality; the consistent management of uncertainties with respect to stakes; the mastery of components aging and the expression of aging-dependent availability, maintenance and safety policies; the expression of obsolescence-related renewing policies; the operating safety tools and methods applied to complex and computerized-controlled systems; the integration of social, organizational and human factors in technical decisions and companies management; transverse and global risk analysis and decision-aid approaches; the vigilance culture; crisis anticipation and management; the experience feedback on technical and organisational aspects; efficiency and risk mastery indicators; cost/benefit approach in risk management, and economic intelligence approaches. Nineteen presentations have been selected which deal with the mastery of risks and the operating safety at nuclear facilities. (J.S.)

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

Safety management - policy, analysis and implementation

International Nuclear Information System (INIS)

Allen, F.R.

1993-01-01

The nuclear industry is moving towards a period of ever increasing emphasis on business performance and profitability. Safety has, of course, always been a major concern of management in the nuclear industry and elsewhere. The civil aviation industry , for example, has had a similar concern for safety. Other industry sectors are also developing safety management as a response to events within and outside their sectors. In this paper the way that the risk management process as a whole is being addressed is looked at. Can we use risk management, initially a safety-orientated tool, to improve business performance? (author)

International Fatigue Risk Management Forum : Safety Promotion and Feedback in FRMS

NARCIS (Netherlands)

Stewart, S.; Koornneef, F.; Akselsson, R.

2009-01-01

Chapter 8: International Fatigue Risk Management Forum - Safety Promotion and Feedback in FRMS The European Commission HILAS project (Human Integration into the Lifecycle of Aviation Systems - a project supported by the European Commission’s 6th Framework between 2005-2009) was focused on using

Risk analysis and safety rationale

International Nuclear Information System (INIS)

Bengtsson, G.

1989-01-01

Decision making with respect to safety is becoming more and more complex. The risk involved must be taken into account together with numerous other factors such as the benefits, the uncertainties and the public perception. Can the decision maker be aided by some kind of system, general rules of thumb, or broader perspective on similar decisions? This question has been addressed in a joint Nordic project relating to nuclear power. Modern techniques for risk assessment and management have been studied, and parallels drawn to such areas as offshore safety and management of toxic chemicals in the environment. The report summarises the finding of 5 major technical reports which have been published in the NORD-series. The topics includes developments, uncertainties and limitations in probabilistic safety assessments, negligible risks, risk-cost trade-offs, optimisation of nuclear safety and radiation protection, and the role of risks in the decision making process. (author) 84 refs

75 FR 10490 - Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management...

Science.gov (United States)

2010-03-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Arthritis Drugs Advisory Committee and the Drug Safety and Risk Management Advisory... Drug Safety and Risk Management Advisory Committee. General Function of the Committees: To provide...

Roy's safety-first portfolio principle in financial risk management of disastrous events.

Science.gov (United States)

Chiu, Mei Choi; Wong, Hoi Ying; Li, Duan

2012-11-01

Roy pioneers the concept and practice of risk management of disastrous events via his safety-first principle for portfolio selection. More specifically, his safety-first principle advocates an optimal portfolio strategy generated from minimizing the disaster probability, while subject to the budget constraint and the mean constraint that the expected final wealth is not less than a preselected disaster level. This article studies the dynamic safety-first principle in continuous time and its application in asset and liability management. We reveal that the distortion resulting from dropping the mean constraint, as a common practice to approximate the original Roy's setting, either leads to a trivial case or changes the problem nature completely to a target-reaching problem, which produces a highly leveraged trading strategy. Recognizing the ill-posed nature of the corresponding Lagrangian method when retaining the mean constraint, we invoke a wisdom observed from a limited funding-level regulation of pension funds and modify the original safety-first formulation accordingly by imposing an upper bound on the funding level. This model revision enables us to solve completely the safety-first asset-liability problem by a martingale approach and to derive an optimal policy that follows faithfully the spirit of the safety-first principle and demonstrates a prominent nature of fighting for the best and preventing disaster from happening. © 2012 Society for Risk Analysis.

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.

Process management - critical safety issues with focus on risk management; Processtyrning - kritiska saekerhetsfraagor med inriktning paa riskhantering

Energy Technology Data Exchange (ETDEWEB)

Sanne, Johan M. [Linkoeping Univ. (Sweden). The Tema Inst. - Technology and Social Change

2005-12-15

Organizational changes focused on process orientation are taking place among Swedish nuclear power plants, aiming at improving the operation. The Swedish Nuclear Power Inspectorate has identified a need for increased knowledge within the area for its regulatory activities. In order to analyze what process orientation imply for nuclear power plant safety a number of questions must be asked: 1. How is safety in nuclear power production created currently? What significance does the functional organization play? 2. How can organizational forms be analysed? What consequences does quality management have for work and for the enterprise? 3. Why should nuclear power plants be process oriented? Who are the customers and what are their customer values? Which customers are expected to contribute from process orientation? 4. What can one learn from process orientation in other safety critical systems? What is the effect on those features that currently create safety? 5. Could customer values increase for one customer without decreasing for other customers? What is the relationship between economic and safety interests from an increased process orientation? The deregulation of the electricity market have caused an interest in increased economic efficiency, which is the motivation for the interest in process orientation. among other means. It is the nuclear power plants' owners and the distributors (often the same corporations) that have the strongest interest in process orientation. If the functional organization and associated practices are decomposed, the prerequisites of the risk management regime changes, perhaps deteriorating its functionality. When nuclear power operators consider the introduction of process orientation, the Nuclear Power Inspectorate should require that 1. The operators perform a risk analysis beforehand concerning the potential consequences that process orientation might convey: the analysis should contain a model specifying how safety is currently

The use of a basic safety investment model in a practical risk management context

International Nuclear Information System (INIS)

Aven, Terje; Hiriart, Yolande

2011-01-01

We consider a basic model in economic safety analysis: a firm is willing to invest an amount x in safety measures to avoid an accident A, which in the case of occurrence, leads to a loss of size L. The probability of an accident is a function of x. The optimal value of x is determined by minimizing the expected costs. In the paper, we re-examine this model by adopting a practical risk/safety management perspective. We question how this model can be used for guiding the firm and regulators in determining the proper level of investment in safety. Attention is given to issues like how to determine the probability of an accident and how to take into account uncertainties that extend beyond the expected value. It is concluded that the model, with suitable extensions and if properly implemented, provides a valuable decision support tool. By focusing on investment levels and stimulating thereby the generation of alternative risk-reducing measures, the model is considered particularly useful in risk reduction (ALARP) processes. - Highlights: → It is shown how to use a basic investment model in a practical risk management setting. → The model may be a valuable decision support tool if properly implemented. → It guides decision makers on risk reduction and how to determine what is ALARP. → The model stimulates the generation of alternative risk-reducing measures.

Safety control and risk management

International Nuclear Information System (INIS)

Rasmussen, J.

1987-01-01

The acceptable probability of major accidents in nuclear power is very small, and can not be determined from direct empirical evidence. Therefore, control of the level of safety is a complex problem. The difficulty is related to the fact that a variable, 'safety', which is not accessible to direct measurement, is to be tightly controlled. Control, therefore, depends on a systematic, analytical prediction of the target state, i.e., the level of safety, from indirect evidence. From a control theoretic point of view this means that safety is controlled by a system which includes openloop as well as closed loop control paths. The aim of the paper is to take a general systems view on the complex mechanisms involved in the control of safety of industrial installations like nuclear power. From this, the role of probabilistic risk analysis is evaluated and needs for further development discussed. (author)

Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

Energy Technology Data Exchange (ETDEWEB)

REEP, I.E.

1999-05-12

The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001 Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

International Nuclear Information System (INIS)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos

2009-01-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br

2009-07-01

Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

Risk management: integration of social and technical risk variables into safety assessments of LWR'S

International Nuclear Information System (INIS)

Turnage, J.J.; Husseiny, A.A.

1980-01-01

A risk management methodology is developed here to formalize the acceptability levels of commercial LWR power plants via the estimation of risk levels acceptable to the public and the integration of such estimates into risk-benefit analysis. Utility theory is used for developing preference models based on value trade-offs among multiple objectives and uncertainties about the impact of alternatives. The method involves reducing the various variables affecting safety acceptability decisions to a single function that provides a metric for acceptability levels. The function accomondates for technical criteria related to design and licensing decisions, as well as public reactions to certain choices

Big Data Risk Analysis for Rail Safety?

OpenAIRE

Van Gulijk, Coen; Hughes, Peter; Figueres-Esteban, Miguel; Dacre, Marcus; Harrison, Chris; HUD; RSSB

2015-01-01

Computer scientists believe that the enormous amounts of data in the internet will unchain a management revolution of uncanny proportions. Yet, to date, the potential benefit of this revolution is scantily investigated for safety and risk management. This paper gives a brief overview of a research programme that investigates how the new internet-driven data-revolution could benefit safety and risk management for railway safety in the UK. The paper gives a brief overview the current activities...

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

Directory of Open Access Journals (Sweden)

Sergey S. Kudryavtsev

2018-03-01

Full Text Available Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of criteria parameters and their possible values, provided by the experts, a unified information and analytical database is compiled, which is included in the final interrogation questionnaires. Risk assessment of industrial injuries and occupational diseases is based on statistical methods. Results: The result of the research is the creation of Guidelines for risk management on hazardous industrial sites of the Republic of Kazakhstan. The Guidelines determine the directions and methods of complex assessment of the state of industrial safety and labor protection and they could be applied as methodological basis at the development of preventive measures for emergencies, casualties, and incidents at hazardous industrial sites. Conclusion: Implementation of the information-analytical system of risk level assessment allows to analyze the state of risk of a possible accident at industrial sites, make valid management decisions aimed at the prevention of emergencies, and monitor the effectiveness of accident prevention measures. Keywords: industrial safety, industrial trauma, professional sickness rate, risk assessment, risk management

CEA: assessment of risk management 2011

International Nuclear Information System (INIS)

2012-06-01

This report proposes an overview of CEA activities in the field of risk management in different areas: impact on the environment, installation safety, management of occupational risks (occupational health and safety), radiological protection of workers, transportation of hazardous materials, waste management, protection of sites, installations and heritage, management of emergency situations, management of law risks, controls and audits. It finally presents the risk management department

Safety-barrier diagrams as a safety management tool

DEFF Research Database (Denmark)

Duijm, Nijs Jan

2009-01-01

Safety-barrier diagrams and “bow-tie” diagrams have become popular methods in risk analysis and safety management. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The latter's relation to other methods such as fault trees and Bayesian...

Does a reactor need a safety backfit. Case study on communicating decision and risk analysis information to managers

Energy Technology Data Exchange (ETDEWEB)

Brown, R.V.; Ulvila, J.W.

1988-06-01

An approach to communicating decision and risk analysis findings to managers is illustrated in a real case context. This article consists essentially of a report prepared for senior managers of the Nuclear Regulatory Commission to help them make a reactor safety decision. It illustrates the communication of decision analysis findings relating to technical risks, costs, and benefits in support of a major risk management decision: whether or not to require a safety backfit. Its focus is on the needs of decision makers, and it introduces some novel communication devices.

CEA: risk management assessment 2011

International Nuclear Information System (INIS)

Bigot, Bernard; Bonnevie, Edwige; Maillot, Bernard

2012-01-01

This report proposes a qualitative and quantitative overview of CEA activities in the field of risk management during 2011. These activities concerned the impact on the environment, the safety of installations, the management of professional risks (safety and health at work), the radiological protection of workers, the transports of hazardous materials, waste management, protection of sites, installations and heritage, the management of emergency situations, the management of law risks, controls and audits

Strengthening air traffic safety management by moving from outcome-based towards risk-based evaluation of runway incursions

International Nuclear Information System (INIS)

Stroeve, Sybert H.; Som, Pradip; Doorn, Bas A. van; Bakker, G.J.

2016-01-01

Current safety management of aerodrome operations uses judgements of severity categories to evaluate runway incursions. Incident data show a small minority of severe incursions and a large majority of less severe incursions. We show that these severity judgements are mainly based upon the outcomes of runway incursions, in particular on the closest distances attained. As such, the severity-based evaluation leads to coincidental safety management feedback, wherein causes and risk implications of runway incursions are not well considered. In this paper we present a new framework for the evaluation of runway incursions, which effectively uses all runway incursions, which judges same types of causes similarly, and which structures causes and risk implications. The framework is based on risks of scenarios associated with the initiation of runway incursions. As a basis an inventory of scenarios is provided, which can represent almost all runway incursions involving a conflict with an aircraft. A main step in the framework is the assessment of the conditional probability of a collision given a runway incursion scenario. This can be effectively achieved for large sets of scenarios by agent-based dynamic risk modelling. The results provide detailed feedback on risks of runway incursion scenarios, thus enabling effective safety management. - Highlights: • Current evaluation of runway incursions is primarily based on their outcomes. • A new framework assesses collision risk given initiation of runway incursions. • Agent-based dynamic risk modelling can evaluate the risks of many scenarios. • A developed scenario inventory can represent almost all runway incursions. • The framework provides detailed feedback to safety management.

Tools for road infrastructure safety management in poland

Directory of Open Access Journals (Sweden)

Kustra Wojciech

2017-01-01

Full Text Available Road safety can be improved by implementing principles of road safety infrastructure management (RIS on the network of European roads as adopted in the Directive. The document recommends that member states should use tried and tested tools for road safety management such as: road safety impact assessment (RIA, road safety audit (RSA, safety management on existing road networks including road safety ranking (RSM and road safety inspection (RSI. The objective of the methods is to help road authorities to take rational decisions in the area of road safety and road infrastructure safety and understand the consequences occurring in the particular phases of road life cycle. To help with assessing the impact of a road project on the safety of related roads, a method was developed for long-term forecasts of accidents and accident cost estimation as well as a risk classification to identify risks that are not acceptable risks. With regard to road safety audits and road safety inspection, a set of principles was developed to identify risks and the basic classification of mistakes and omissions.

CEA - 2014 risk management assessment

International Nuclear Information System (INIS)

Bonnevie, Edwige; Verwaerde, Daniel; Maillot, Bernard

2015-06-01

After introducing presentations of CEA managers in charge of risk management and controls, this document presents and comments the actions undertaken by the CEA and the obtained results in terms of risk management in different fields: protection and control of the environment, installation safety, health, safety and radiation protection, transport of hazardous materials, waste management, protection of sites, installations and heritage, management of emergency situations, management of legal risks, internal audits and controls. Other topics are addressed like the presentation of the risk management department, and the role of the CEA in the relationship between research and industry

Trends in risk management in nuclear industry

International Nuclear Information System (INIS)

Kim, Inn Seock

1996-01-01

Safety management may be classified into three dimensions: risk management, accident management, and emergency management. This paper addresses the recent trends of safety management in nuclear industry, focussing on risk management and accident management

Road Safety Risk Assessment: An Analysis of Transport Policy and Management for Low-, Middle-, and High-Income Asian Countries

Directory of Open Access Journals (Sweden)

Syyed Adnan Raheel Shah

2018-02-01

Full Text Available Road safety assessment has played a crucial role in the theory and practice of transport management systems. This paper focuses on risk evaluation in the Asian region by exploring the interaction between road safety risk and influencing factors. In the first stage, a data envelopment analysis (DEA method is applied to calculate and rank the road safety risk levels of Asian countries. In the second stage, a structural equation model (SEM with latent variables is applied to analyze the interaction between the road safety risk level and the latent variables, measured by six observed performance indicators, i.e., financial impact, institutional framework, infrastructure and mobility, legislation and policy, vehicular road users, and trauma management. Finally, this paper illustrates the applicability of this DEA-SEM approach for road safety performance analysis.

Discussion about risk-informed regulations on the nuclear safety

International Nuclear Information System (INIS)

Gu Yeyi

2008-01-01

The article introduces the background and status quo of regulations on the nuclear safety in China, and points out the inadequacies existing with the current regulations. The author explains the risk-informed safety management concerning its development, status quo, and achievements made, in an attempt to make out the trend of improving regulations on the nuclear safety through risk-informed methods. Combining the U.S. development program of establishing risk-informed regulations on the nuclear safety, the author narrates principles and features of the new regulations system, and provides suggestions for the promotion of risk-informed safety management and establishment of risk-informed regulations on the nuclear safety. (author)

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Developing a Safety Management System for Fatigue Related Risks in easyJet

NARCIS (Netherlands)

Stewart, S.; Koornneef, F.; Akselsson, R.; Turner, C.

2009-01-01

Chapter 5: Developing a Safety Management System for Fatigue Related Risks in easyJet The European Commission HILAS project (Human Integration into the Lifecycle of Aviation Systems - a project supported by the European Commission’s 6th Framework between 2005-2009) was focused on using human factors

Risk management and role of schools of the Tokai-village radiation accident in 1999. Safety education and risk management before and during the radiation accident from the standpoint of school nurse teachers

International Nuclear Information System (INIS)

Akisaka, Masafumi; Nakamura, Tomoko; Satake, Tsuyoshi

2002-01-01

The purpose of this study is to evaluate safety education and risk management in the neighborhood schools before and during the radiation accident in the Tokai-village in 1999 from the standpoint of school nurse teachers. Eighty-six school nurse teachers from 44 elementary, 25 junior-high, 14 high and 3 handicapped children's schools were surveyed within neighboring towns and villages. The main results were as follows: There had been few risk management systems against the potential radiation accidents including safety education, radiological monitoring and protection in all of the neighboring schools. There were no significant difference in risk management systems among the schools before the accident, though the anxiety rates of school children were significantly higher in the schools nearest to the accident site. Some radiation risk management systems must be established in neighboring schools including safety education, radiological monitoring and protection. (author)

[Sleepiness, safety on the road and management of risk].

Science.gov (United States)

Garbarino, S; Traversa, F; Spigno, F

2012-01-01

Public health studies have shown that sleepiness at the wheel and other risks associated with sleep are responsible for 5% to 30% of road accidents, depending on the type of driver and/or road. In industrialized countries one-fifth of all traffic accidents can be ascribed to sleepiness behind the wheel. Sleep disorders and various common acute and chronic medical conditions together with lifestyles, extended work hours and prolonged wakefulness directly or indirectly affect the quality and quantity of one's sleep increasing the number of workers with sleep debt and staggered hours. These conditions may increase the risk of road accidents. Strategies to reduce this risk of both commercial and non-commercial drivers related to sleepiness include reliable diagnosis and treatment of sleep disorders, management of chronobiological conflicts, adequate catch-up sleep, and countermeasures against sleepiness at the wheel. Road transport safety requires the adoption of occupational health measures, including risk assessment, health education, technical-environmental prevention and health surveillance.

Risk Level Based Management System: a control banding model for occupational health and safety risk management in a highly regulated environment

Energy Technology Data Exchange (ETDEWEB)

Zalk, D; Kamerzell, R; Paik, S; Kapp, J; Harrington, D; Swuste, P

2009-05-27

The Risk Level Based Management System (RLBMS) is an occupational risk management (ORM) model that focuses occupational safety, hygeiene, and health (OSHH) resources on the highest risk procedures at work. This article demonstrates the model's simplicity through an implementation within a heavily regulated research institution. The model utilizes control banding strategies with a stratification of four risk levels (RLs) for many commonly performed maintenance and support activities, characterizing risk consistently for comparable tasks. RLBMS creates an auditable tracking of activities, maximizes OSHH professional field time, and standardizes documentation and control commensurate to a given task's RL. Validation of RLs and their exposure control effectiveness is collected in a traditional quantitative collection regime for regulatory auditing. However, qualitative risk assessment methods are also used within this validation process. Participatory approaches are used throughout the RLBMS process. Workers are involved in all phases of building, maintaining, and improving this model. This work participation also improves the implementation of established controls.

Probabilistic risk assessment as an aid to risk management

International Nuclear Information System (INIS)

Garrick, B.J.

1982-01-01

Probabilistic risk assessments are providing important insights into nuclear power plant safety. Their value is two-fold: first as a means of quantifying nuclear plant risk including contributors to risk, and second as an aid to risk management. A risk assessment provides an analytical plant model that can be the basis for performing meaningful decision analyses for controlling safety. It is the aspect of quantitative risk management that makes probabilistic risk assessment an important technical discipline of the future

Safety management in research and development organisation

International Nuclear Information System (INIS)

Nivedha, T.

2016-01-01

Health and safety is one of the most important aspects of an organizations smooth and effective functioning. It depends on the safety management, health management, motivation, leadership and training, welfare facilities, accident statistics, policy, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Workplace accidents are increasingly common, main causes are untidiness, noise, too hot or cold environments, old or poorly maintained machines, and lack of training or carelessness of employees. One of the biggest issues facing employers today is the safety of their employees. This study aims at analyzing the occupational health and safety of Research organization in Indira Gandhi Centre for Atomic Research by gathering information on health management, safety management, motivation, leadership and training, welfare facilities, accident statistics, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Data were collected by using questionnaires which were developed on health and safety management system. (author)

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

Science.gov (United States)

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Safety and security risk assessments--now demystified!

Science.gov (United States)

White, Donald E

2011-01-01

Safety/security risk assessments no longer need to spook nor baffle healthcare safety/security managers. This grid template provides at-at-glance quick lookup of the possible threats, the affected people and things, a priority ranking of these risks, and a workable solution for each risk. Using the standard document, spreadsheet, or graphics software already available on your computer, you can easily use a scientific method to produce professional looking risk assessments that get quickly understood by both senior managers and first responders alike!

Risk management at GPU Nuclear

International Nuclear Information System (INIS)

Long, R.L.

1991-01-01

This paper reports on GPU Nuclear. Among other goals, it established the independence of key safety functions as highlighted by the lessons learned from the accident. In particular, an independent Nuclear Assurance Division was established which include Quality Assurance, Training and Education, Emergency Preparedness, and Nuclear Safety Assessment. The latter consisted of corporate and site independent-safety-review groups. As the GPU Nuclear organization matured, a mid-1987 reorganization created an even more focused Planning and Nuclear Safety Division bringing together Nuclear Safety Assessment with Licensing and Regulatory Affairs and Risk Management. The Risk Management Group (RMG), which began its work in fall 1987, was formed to develop a framework for proactive identification, evaluation, and cost-effective reduction and management of risks of all types. The RMG set out to learn as much as possible about risks and their management in nuclear and other high-technology industries. This began with a thorough literature search. It progressed to interviews with individuals and organizations which have demonstrated innovative ideas, experience, and reputations for safe and reliable operation

Risk Assessment for Bridges Safety Management during Operation Based on Fuzzy Clustering Algorithm

Directory of Open Access Journals (Sweden)

Xia Hanyu

2016-01-01

Full Text Available In recent years, large span and large sea-crossing bridges are built, bridges accidents caused by improper operational management occur frequently. In order to explore the better methods for risk assessment of the bridges operation departments, the method based on fuzzy clustering algorithm is selected. Then, the implementation steps of fuzzy clustering algorithm are described, the risk evaluation system is built, and Taizhou Bridge is selected as an example, the quantitation of risk factors is described. After that, the clustering algorithm based on fuzzy equivalence is calculated on MATLAB 2010a. In the last, Taizhou Bridge operation management departments are classified and sorted according to the degree of risk, and the safety situation of operation departments is analyzed.

The Development of a Risk Management System in the Field of Industrial Safety in the Republic of Kazakhstan

OpenAIRE

Sergey S. Kudryavtsev; Pavel V. Yemelin; Natalya K. Yemelina

2018-01-01

Background: The purpose of the work is to develop a system that allows processing of information for analysis and industrial risk management, to monitor the level of industrial safety and to perform necessary measures aimed at the prevention of accidents, casualties, and development of professional diseases for effective management of industrial safety at hazardous industrial sites. Methods: Risk assessment of accidents and incidents is based on expert evaluations. Based on the lists of crite...

Risk informed approach and its application in Daya Bay NPP operation safety management

International Nuclear Information System (INIS)

He Yu; Zhang Jinlong; Bao Yukun

2004-01-01

The paper presents a systematic risk assessment approach based on probabilistic theory, and discusses its significance and application process in safety management. Risk informed approach that uses deterministic engineering principles and probabilistic methods is the appropriate approach to decision making at nuclear power plants. The paper also studies an actual case taken place at Daya Bay Nuclear Power Station using PSA approach to equipment maintenance. (authors)

Thermonuclear generation program: risks and safety

International Nuclear Information System (INIS)

Goes, Alexandre Gromann de Araujo

1999-01-01

This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process

Safety concerns and risk management of multiple sclerosis therapies

DEFF Research Database (Denmark)

Soelberg Sorensen, P.

2017-01-01

Currently, more than ten drugs have been approved for treatment of relapsing-remitting multiple sclerosis (MS). Newer treatments may be more effective, but have less favorable safety record. Interferon-β preparations and glatiramer acetate treatment require frequent subcutaneous or intramuscular...... disease activity can choose between dimethyl fumarate and teriflunomide or the “old injectable.” Patients with very active MS may choose a more effective drug as the initial treatment. In case of side effects on one drug, switch to another drug can be tried. Suboptimal effect of the first drug indicates...... escalation to a highly efficacious drug. A favorable benefit-risk balance can be maintained by appropriate patient selection and appropriate risk management on therapy. New treatments will within the coming 1-2 years change our current treatment algorithm for relapsing-remitting MS....

Evaluating safety management system implementation

International Nuclear Information System (INIS)

Preuss, M.

2009-01-01

Canada is committed to not only maintaining, but also improving upon our record of having one of the safest aviation systems in the world. The development, implementation and maintenance of safety management systems is a significant step towards improving safety performance. Canada is considered a world leader in this area and we are fully engaged in implementation. By integrating risk management systems and business practices, the aviation industry stands to gain better safety performance with less regulatory intervention. These are important steps towards improving safety and enhancing the public's confidence in the safety of Canada's aviation system. (author)

Risk management strategy to increase the safety of workers in the nanomaterials industry

Energy Technology Data Exchange (ETDEWEB)

Ling, Min-Pei, E-mail: lingmp@mail.cmu.edu.tw [Department of Health Risk Management, China Medical University, Taichung 40402, Taiwan, ROC (China); Lin, Wei-Chao; Liu, Chia-Chyuan [Department of Cosmetic Science, Chia Nan University of Pharmacy and Science, Tainan 71710, Taiwan, ROC (China); Huang, Yi-Shiao; Chueh, Miao-Ju [Industrial Safety and Health Association of the ROC, Taipei 11670, Taiwan, ROC (China); Shih, Tung-Sheng [Institute of Occupational Safety and Health, Council of Labor Affairs, Taipei 22143, Taiwan, ROC (China)

2012-08-30

Highlights: Black-Right-Pointing-Pointer On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. Black-Right-Pointing-Pointer The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). Black-Right-Pointing-Pointer According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. Black-Right-Pointing-Pointer The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are

Risk management strategy to increase the safety of workers in the nanomaterials industry

International Nuclear Information System (INIS)

Ling, Min-Pei; Lin, Wei-Chao; Liu, Chia-Chyuan; Huang, Yi-Shiao; Chueh, Miao-Ju; Shih, Tung-Sheng

2012-01-01

Highlights: ► On-site assessment of nanomaterials using physiochemical and cytotoxic analysis can help identify risks for each nanomaterials manufacturing plant. ► The risk of the nanomaterials manufacturing plants can be divided into three levels based on exposure routes (tier 1), aspect identification (tier 2), and toxicological screening (tier 3). ► According to the different risk levels, the precautionary risk management (PRM) such as technology control, engineering control, and personal protective equipment were applied. ► The PRM strategy can be effectively reduced workers risks for nanomaterial industries. - Abstract: In recent years, many engineered nanomaterials (NMs) have been produced, but increasing research has revealed that these may have toxicities far greater than conventional materials and cause significant adverse health effects. At present, there is insufficient data to determine the permissible concentrations of NMs in the workplace. There is also a lack of toxicity data and environmental monitoring results relating to complete health risk assessment. In view of this, we believe that workers in the NMs industry should be provided with simple and practical risk management strategy to ensure occupational health and safety. In this study, we developed a risk management strategy based on the precautionary risk management (PRM). The risk of the engineered NMs manufacturing plants can be divided into three levels based on aspect identification, solubility tests, dermal absorption, and cytotoxic analyses. The risk management strategies include aspects relating to technology control, engineering control, personal protective equipment, and monitoring of the working environment for each level. Here we report the first case in which a simple and practical risk management strategy applying in specific engineered NMs manufacturing plants. We are confident that our risk management strategy can be effectively reduced engineered NM industries risks for

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care.

Science.gov (United States)

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-02-01

The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1). errors inevitably occur and usually derive from faulty system design, not from negligence; (2). accident prevention should be an ongoing process based on open and full reporting; (3). major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff.

Participation in the management of occupational health and safety improvement : workers'investigation as active risk analysis

NARCIS (Netherlands)

Buitelaar, W.L.

1989-01-01

In this report the initiating involvement of workers on health and safety at the workplace and on the quality of working life has been underlined. Workers' investigation in this matter is viewed as an additional form of risk management. Covering: occupational health and safety as a social

Investigation of Relationship between Level of Awareness around Health, Safety and Environment Management System and Its Effects on Safety Climate and Risk Perception by Employees in an Iran Oil Refinery, 2015

Directory of Open Access Journals (Sweden)

Milad Ahmadi Marzaleh

2017-02-01

Full Text Available Special attention of and oil, gas and petrochemical large corporation in the world to the HSE management system is due to its importance in the designing and development of products, services and processes by considering its health, safety and environment requirements. Staff's perception of the existing job risks has a significant impact on their safe behavior at work. This study was conducted to determine the relationship between safety climate and staff's perception of risk with an awareness level among employees of the HSE management system in an oil refinery in Kermanshah. The study population was employees in one of the oil refineries in Iran. After designing and questionnaire psychometric assessment of staff knowledge of HSE management system (Cronbach's alpha was 0.9 and its validity was assessed by certified professionals, Loughborough safety climate questionnaire and Flin risk perception questionnaire were used. Data analysis was performed using SPSS V22 software. Results showed that the relationship between safety climate and awareness level of the HSE management system; also the relationship between safety climate and perception of risk was also getting significant. However, the relationship between perception of risk and awareness level of the HSE management system was not significant. The results of this study showed a moderate awareness of HSE Management System in refinery workers. In this regard, appropriate and proper management policy should be committed to improving the situation. The results of this study is a profile the situation of safety climate in the refinery, which can be used as an indicator for the development of preventive policies and evaluate the performance of the organization's safety and the results of the safety improvement organization.

Airline Safety Management: The development of a proactive safety mechanism model for the evolution of safety management system

OpenAIRE

Hsu, Yueh-Ling

2004-01-01

The systemic origins of many accidents have led to heightened interest in the way in which organisations identify and manage risks within the airline industry. The activities which are thought to represent the term "organisational accident", "safety culture" and "proactive approach" are documented and seek to explain the fact that airlines differ in their willingness and ability to conduct safety management. However, an important but yet relatively undefined task in the airline...

An approach for risk informed safety culture assessment for Canadian nuclear power stations

International Nuclear Information System (INIS)

Nelson, W.R.

2010-01-01

One of the most important components of effective safety and risk management for nuclear power stations is a healthy safety culture. DNV has developed an approach for risk informed safety culture assessment that combines two complementary paradigms for safety and risk management: loss prevention - for preventing and intervening in accidents; and critical function management - for achieving safety and performance goals. Combining these two paradigms makes it possible to provide more robust systems for safety management and to support a healthy safety culture. This approach is being applied to safety culture assessment in partnership with a Canadian nuclear utility. (author)

Effective Safety Management in Construction Project

Science.gov (United States)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Integrated risk management of safety and development on transportation corridors

International Nuclear Information System (INIS)

Thekdi, Shital A.; Lambert, James H.

2015-01-01

Prioritization of investments to protect safety and performance of multi-regional transportation networks from adjacent land development is a key concern for infrastructure agencies, land developers, and other stakeholders. Despite ample literature describing relationships between transportation and land use, no evidence-based methods exist for monitoring corridor needs on a large scale. Risk analysis is essential to the preservation of system safety and capacity, including avoidance of costly retrofits, regret, and belated action. This paper introduces the Corridor Trace Analysis (CTA) for prioritizing corridor segments that are vulnerable to adjacent land development. The method integrates several components: (i) estimation of likelihood of adjacent land development, using influence diagram and rule-based modeling, (ii) characterization of access point density using geospatial methods, and (iii) plural-model evaluation of corridors, monitoring indices of land development likelihood, access point densities, and traffic volumes. The results inform deployment of options that include closing access points, restricting development, and negotiation of agencies and developers. The CTA method is demonstrated on a region encompassing 6000 centerline miles (about 10,000 km) of transportation corridors. The method will be of interest to managers investing in safety and performance of infrastructure systems, balancing safety, financial, and other criteria of concern for diverse stakeholders. - Highlights: • The Corridor Trace Analysis (CTA) method for prioritizing transportation corridors. • The CTA method studies corridors vulnerable to adjacent land development. • The CTA method quantifies the influence of risk scenarios on agency priorities. • The CTA method is demonstrated on 6000 miles of critical transportation corridor

Optimizing risk management

International Nuclear Information System (INIS)

Kindred, G.W.

2000-01-01

Commercial nuclear power plant management is focussed on the safe, efficient, economical production of electricity. To accomplish the safe aspect of the equation, risk must be determined for the operation and maintenance of the facility. To accomplish the efficient aspect of the equation, management must understand those risks and factor risk insights into their decision process. The final piece of the equation is economical which is accomplished by minimizing, plant outage durations and proper utilization of resources. Probabilistic Risk Assessment can provide the risk insights to accomplish all three; safety, efficiency, and economically. How? Safe production of electricity can be quantified by use of PRA modeling and other risk insights that can determine the core damage frequency. Efficient production of electricity can be influenced by providing management with quantified risk insights for use in decision making. And, one example of economical production of electricity is by not having over conservative deterministic based defense in depth approaches to system maintenance and availability. By using risk-informed insights nuclear safety can be quantified and risk can be managed. Confidence in this approach can be achieved by ensuring the content and quality of the PRA is standardized throughout the industry. The time has arrived for Probabilistic Risk Assessment to take an active position as a major role player in the safe, efficient, and economical operation of commercial nuclear power plants. (author)

Risk Management in Cocurricular Activities.

Science.gov (United States)

Webb, Edward M.

1988-01-01

Discusses risk management for colleges' cocurricular activities. Discusses tort liability, contributory negligence, and assumption of risk. Provides six concrete steps for managing risks responsibly and professionally: adopting an educational mission statement, assigning risk to others, establishing safety standards, training club advisors,…

Use of a Computerized Tool (ORAM) to Help Manage Outage Safety and Risk at NPP Krsko

International Nuclear Information System (INIS)

Spiler, J.; Basic, I.; Vrbanic, I.; Fifnja, I.; Kastelan, M.; Dagan, W. J.; Shanley, L. B.; Naum, T. J.

1998-01-01

Outage Risk Assessment and Management (ORAM) is a computerized methodology developed by the U.S. Electric Power Research Institute (EPRI) to help Nuclear Power Plant personnel manage the risk and safety associated with refueling and forced plant outages. Today, over 60 plants including NPP Krsko are using ORAM during the preparation and performance of plant outages. In fact, many plants are attributing much of the reductions in the duration of refueling outages to the use of ORAM. The success of the ORAM methodology is the capability to provide plant and management personnel with understandable results from both deterministic evaluations of plant safety and quantitative risk assessments. The Nuklearna Elektrarna Krsko (NEK) use of ORAM involves both of these approaches. The deterministic portion of ORAM is used to model the NPP Krsko Shutdown Technical Specifications and administrative considerations. The probabilistic portion of ORAM uses industry and NEK specific initiating events and other risk elements pertaining to shutdown to derive a quantitative risk assessment for various end states, including core damage and RCS boiling. This paper expands on the value of each approach and demonstrates the benefits of combining these elements in the decision-making process. Another key advantage of ORAM is the ability to apply the methodology to specific outages. Since no outage is identical, this provides tremendous benefits to plant personnel for managing the safety and risk of a particular outage. ORAM does this ba organizing all of the various plant configurations and equipment unavailability windows into numerous plant states. Furthermore, ORAM evaluations can be a utomated b y interfacing with outage scheduling software programs such as Primavera. For each plant state, the deterministic and the probabilistic logic evaluations are applied. This paper will demonstrate the ORAM evaluation for an actual NPP Krsko outage. (author)

CEA - Assessment of risk management 2013

International Nuclear Information System (INIS)

Bigot, Bernard; Bonnevie, Edwige; Maillot, Bernard

2014-06-01

After some introducing texts by CEA managers, this report proposes a rather detailed overview and presentation of CEA activities, objectives and obtained results in different fields: protection and control of the environment, installation safety, health, safety and radiation protection, transports of hazardous materials, waste management, protection of sites, installations and heritage, management of emergency situations, management of legal risks, internal controls and audits, activity of the risk management department, CEA activities from research to industry

University building safety index measurement using risk and implementation matrix

Science.gov (United States)

Rahman, A.; Arumsari, F.; Maryani, A.

2018-04-01

Many high rise building constructed in several universities in Indonesia. The high-rise building management must provide the safety planning and proper safety equipment in each part of the building. Unfortunately, most of the university in Indonesia have not been applying safety policy yet and less awareness on treating safety facilities. Several fire accidents in university showed that some significant risk should be managed by the building management. This research developed a framework for measuring the high rise building safety index in university The framework is not only assessed the risk magnitude but also designed modular building safety checklist for measuring the safety implementation level. The safety checklist has been developed for 8 types of the university rooms, i.e.: office, classroom, 4 type of laboratories, canteen, and library. University building safety index determined using risk-implementation matrix by measuring the risk magnitude and assessing the safety implementation level. Building Safety Index measurement has been applied in 4 high rise buildings in ITS Campus. The building assessment showed that the rectorate building in secure condition and chemical department building in beware condition. While the library and administration center building was in less secure condition.

Safety management and risk assessment in chemical laboratories.

Science.gov (United States)

Marendaz, Jean-Luc; Friedrich, Kirstin; Meyer, Thierry

2011-01-01

The present paper highlights a new safety management program, MICE (Management, Information, Control and Emergency), which has been specifically adapted for the academic environment. The process starts with an exhaustive hazard inventory supported by a platform assembling specific hazards encountered in laboratories and their subsequent classification. A proof of concept is given by a series of implementations in the domain of chemistry targeting workplace health protection. The methodology is expressed through three examples to illustrate how the MICE program can be used to address safety concerns regarding chemicals, strong magnetic fields and nanoparticles in research laboratories. A comprehensive chemical management program is also depicted.

Discussion on the safety production risk managmeent of uranium mines

International Nuclear Information System (INIS)

Liu Bin; Luo Yun; Hu Penghua; Zhu Disi

2009-01-01

Based on the modern safety risk management theories and according to the actual situation, risk management for work safety in uranium mines is discussed from three aspects: risk identification,risk analysis and evaluation, and risk control. Referring to the '4M(Men,Machine,Medium,Management) factors' and 'Three types of hazards' theory, the classification of uranium mine accidents and risk factors are analyzed. In addition, the types and evaluation indexes of major risks of uranium mines as well as the 'spot, line, area' model of risk identification and analysis and the 'hierarchical' risk control mechanism are also studied. (authors)

[OCCUPATIONAL HEALTH RISK ASSESSMENT AND MANAGEMENT IN WORKERS IN IMPROVEMENT OF NATIONAL POLICY IN OCCUPATIONAL HYGIENE AND SAFETY].

Science.gov (United States)

Shur, P Z; Zaĭtseva, N V; Alekseev, V B; Shliapnikov, D M

2015-01-01

In accordance with the international documents in the field of occupational safety and hygiene, the assessment and minimization of occupational risks is a key instrument for the health maintenance of workers. One of the main ways to achieve it is the minimization of occupational risks. Correspondingly, the instrument for the implementation of this method is the methodology of analysis of occupational risks. In Russian Federation there were the preconditions for the formation of the system for the assessment and management of occupational risks. As the target of the national (state) policy in the field of occupational safety in accordance with ILO Conventions it can be offered the prevention of accidents and injuries to health arising from work or related with it, minimizing the causes of hazards inherent in the working environment, as far as it is reasonably and practically feasible. Global trend ofusing the methodology of the assessment and management of occupational risks to life and health of citizens requires the improvement of national policies in the field of occupational hygiene and safety. Achieving an acceptable level of occupational risk in the formation of national policy in the field of occupational hygiene and safety can be considered as one of the main tasks.

From aviation to medicine: applying concepts of aviation safety to risk management in ambulatory care

Science.gov (United States)

Wilf-Miron, R; Lewenhoff, I; Benyamini, Z; Aviram, A

2003-01-01



 The development of a medical risk management programme based on the aviation safety approach and its implementation in a large ambulatory healthcare organisation is described. The following key safety principles were applied: (1) errors inevitably occur and usually derive from faulty system design, not from negligence; (2) accident prevention should be an ongoing process based on open and full reporting; (3) major accidents are only the "tip of the iceberg" of processes that indicate possibilities for organisational learning. Reporting physicians were granted immunity, which encouraged open reporting of errors. A telephone "hotline" served the medical staff for direct reporting and receipt of emotional support and medical guidance. Any adverse event which had learning potential was debriefed, while focusing on the human cause of error within a systemic context. Specific recommendations were formulated to rectify processes conducive to error when failures were identified. During the first 5 years of implementation, the aviation safety concept and tools were successfully adapted to ambulatory care, fostering a culture of greater concern for patient safety through risk management while providing support to the medical staff. PMID:12571343

Analysis and design on airport safety information management system

Directory of Open Access Journals (Sweden)

Yan Lin

2017-01-01

Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency．

Operational Risk Management and Military Aviation Safety

National Research Council Canada - National Science Library

Ashley, Park

1999-01-01

.... The Army's Class A aviation mishap rate declined after it implemented risk management (RM) principles in 1987. This reduction caught the attention of Air Force leadership who have since stated that the application of operational risk management...

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

Science.gov (United States)

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland

Science.gov (United States)

Baron, Patrick; Frattaroli, Shannon

2016-01-01

The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1) characteristics of Maryland direct-market poultry production and processing; 2) microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3) motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain. PMID:27341034

Awareness and Perceptions of Food Safety Risks and Risk Management in Poultry Production and Slaughter: A Qualitative Study of Direct-Market Poultry Producers in Maryland.

Directory of Open Access Journals (Sweden)

Patrick Baron

Full Text Available The objective of this study was to document and understand the perceptions and opinions of small-scale poultry producers who market directly to consumers about microbial food safety risks in the poultry supply chain. Between January and November 2014, we conducted semi-structured, in-depth interviews with a convenience sample of 16 owner-operators of Maryland direct-market commercial poultry farms. Three overarching thematic categories emerged from these interviews that describe: 1 characteristics of Maryland direct-market poultry production and processing; 2 microbial food safety risk awareness and risk management in small-scale poultry production, slaughter and processing; and 3 motivations for prioritizing food safety in the statewide direct-market poultry supply chain. Key informants provided valuable insights on many topics relevant to evaluating microbial food safety in the Maryland direct-market poultry supply chain, including: direct-market poultry production and processing practices and models, perspectives on issues related to food safety risk management, perspectives on direct-market agriculture economics and marketing strategies, and ideas for how to enhance food safety at the direct-market level of the Maryland poultry supply chain. The findings have policy implications and provide insights into food safety in small-scale commercial poultry production, processing, distribution and retail. In addition, the findings will inform future food safety research on the small-scale US poultry supply chain.

Study Of Safety Management By Using Gis In Coimbatore

Directory of Open Access Journals (Sweden)

S. Kanchana

2015-08-01

Full Text Available The safety management is very important in the process of construction .The traditional methods of construction safety control cannot meet the construction of big project. To ensure the safety of construction and reduce accidents in the process of construction the current situation and problems we face in construction safety management should be studied first. And then the project risk warning mechanism based on the GIS is constructed according to the problems we faced to achieve visual monitoring and warning of construction safety risk management and to provide decision support for construction. This project aims to develop a web-based spatial decision support system model for proactive health and safety management in linear construction projects. 5 Currently health and safety management is usually performed reactively instead of proactive management since hazard identification and risk assessment is mostly performed on paper based documents that are not effectively used at site. An information system relates to a chain of operations lead to planning the observation and collection of data to storage and analysis of data to the use of derived information in decision-making processes. To create a web-based free and open sourced GIS that can work with different data formats by exchanging and presenting data as a real-time map on web.

Product Engineering Class in the Software Safety Risk Taxonomy for Building Safety-Critical Systems

Science.gov (United States)

Hill, Janice; Victor, Daniel

2008-01-01

When software safety requirements are imposed on legacy safety-critical systems, retrospective safety cases need to be formulated as part of recertifying the systems for further use and risks must be documented and managed to give confidence for reusing the systems. The SEJ Software Development Risk Taxonomy [4] focuses on general software development issues. It does not, however, cover all the safety risks. The Software Safety Risk Taxonomy [8] was developed which provides a construct for eliciting and categorizing software safety risks in a straightforward manner. In this paper, we present extended work on the taxonomy for safety that incorporates the additional issues inherent in the development and maintenance of safety-critical systems with software. An instrument called a Software Safety Risk Taxonomy Based Questionnaire (TBQ) is generated containing questions addressing each safety attribute in the Software Safety Risk Taxonomy. Software safety risks are surfaced using the new TBQ and then analyzed. In this paper we give the definitions for the specialized Product Engineering Class within the Software Safety Risk Taxonomy. At the end of the paper, we present the tool known as the 'Legacy Systems Risk Database Tool' that is used to collect and analyze the data required to show traceability to a particular safety standard

Management of National Nuclear Power Programs for assured safety

Energy Technology Data Exchange (ETDEWEB)

Connolly, T.J. (ed.)

1985-01-01

Topics discussed in this report include: nuclear utility organization; before the Florida Public Service Commission in re: St. Lucie Unit No. 2 cost recovery; nuclear reliability improvement and safety operations; nuclear utility management; training of nuclear facility personnel; US experience in key areas of nuclear safety; the US Nuclear Regulatory Commission - function and process; regulatory considerations of the risk of nuclear power plants; overview of the processes of reliability and risk management; management significance of risk analysis; international and domestic institutional issues for peaceful nuclear uses; the role of the Institute of Nuclear Power Operations (INPO); and nuclear safety activities of the International Atomic Energy Agency (IAEA).

Management of National Nuclear Power Programs for assured safety

International Nuclear Information System (INIS)

Connolly, T.J.

1985-01-01

Topics discussed in this report include: nuclear utility organization; before the Florida Public Service Commission in re: St. Lucie Unit No. 2 cost recovery; nuclear reliability improvement and safety operations; nuclear utility management; training of nuclear facility personnel; US experience in key areas of nuclear safety; the US Nuclear Regulatory Commission - function and process; regulatory considerations of the risk of nuclear power plants; overview of the processes of reliability and risk management; management significance of risk analysis; international and domestic institutional issues for peaceful nuclear uses; the role of the Institute of Nuclear Power Operations (INPO); and nuclear safety activities of the International Atomic Energy Agency (IAEA)

A simplified method for quantitative assessment of the relative health and safety risk of environmental management activities

International Nuclear Information System (INIS)

Eide, S.A.; Smith, T.H.; Peatross, R.G.; Stepan, I.E.

1996-09-01

This report presents a simplified method to assess the health and safety risk of Environmental Management activities of the US Department of Energy (DOE). The method applies to all types of Environmental Management activities including waste management, environmental restoration, and decontamination and decommissioning. The method is particularly useful for planning or tradeoff studies involving multiple conceptual options because it combines rapid evaluation with a quantitative approach. The method is also potentially applicable to risk assessments of activities other than DOE Environmental Management activities if rapid quantitative results are desired

Systematic implementation of clinical risk management in a large university hospital: the impact of risk managers.

Science.gov (United States)

Sendlhofer, Gerald; Brunner, Gernot; Tax, Christa; Falzberger, Gebhard; Smolle, Josef; Leitgeb, Karina; Kober, Brigitte; Kamolz, Lars Peter

2015-01-01

For health care systems in recent years, patient safety has increasingly become a priority issue. National and international strategies have been considered to attempt to overcome the most prominent hazards while patients are receiving health care. Thereby, clinical risk management (CRM) plays a dominant role in enabling the identification, analysis, and management of potential risks. CRM implementation into routine procedures within complex hospital organizations is challenging, as in the past, organizational change strategies using a top-down approach have often failed. Therefore, one of our main objectives was to educate a certain number of risk managers in facilitating CRM using a bottom-up approach. To achieve our primary purpose, five project strands were developed, and consequently followed, introducing CRM: corporate governance, risk management (RM) training, CRM process, information, and involvement. The core part of the CRM process involved the education of risk managers within each organizational unit. To account for the size of the existing organization, we assumed that a minimum of 1 % of the workforce had to be trained in RM to disseminate the continuous improvement of quality and safety. Following a roll-out plan, CRM was introduced in each unit and potential risks were identified. Alongside the changes in the corporate governance, a hospital-wide CRM process was introduced resulting in 158 trained risk managers correlating to 2.0 % of the total workforce. Currently, risk managers are present in every unit and have identified 360 operational risks. Among those, 176 risks were scored as strategic and clustered together into top risks. Effective meeting structures and opportunities to share information and knowledge were introduced. Thus far, 31 units have been externally audited in CRM. The CRM approach is unique with respect to its dimension; members of all health care professions were trained to be able to identify potential risks. A network of risk

LWR risk management by safety R and D

International Nuclear Information System (INIS)

El-Sheikh, K.A.; Damon, D.R.; Temme, M.I.

1982-01-01

This paper presents a methodology which has been developed for selecting LWR safety RandD projects. The methodology provides ranking of the RandD projects and the RandD budget allocation which minimizes public risk. The methodology contains procedures to identify institutional, organizational, legal, and contractual factors which affect the probabilities of success and use of RandD projects so that these factors can be evaluated and possibly managed.The methodology also contains a nonlinear optimization code to provide the optimum selection of RandD projects and evaluate the sensitivity of this selection to uncertainity in the input data. Application of the methodology to a test case has shown that: 1) commonly used schemes for ranking RandD projects do not necessarily lead to the optimum selection, and 2) the optimum selection is not necessarily strongly sensitive to uncertainty in the input data

Living with risk: a management question

International Nuclear Information System (INIS)

Ale, Ben J.M.

2005-01-01

Public authorities started to be really involved in risk management of hazardous materials some 30 years ago. Recent developments have led to fresh attention for this matter and many further developments are underway. The history of risk management and safety regulation is one of strongly variable interest, forgotten lessons and rude awakenings. The impetus exerted by accidents is short lived. Safety cases become documents to satisfy regulation rather than instruments to reduce risk. Deregulation, privatisation, and outsourcing pose new challenges to safety and risk management. Some of the unfortunate side effects have already become apparent. This invariably leads to the next disaster, which will have a striking resemblance to the previous one when abstracted from the immediate technological context. Lessons can be learned if we really want. The question remains: 'Do we?'

Institutional failure: are safety management systems the answer?

Energy Technology Data Exchange (ETDEWEB)

Waddington, J.G.; Lafortune, J.F. [International Safety Research, Ottawa, Ontario (Canada); Duffey, R.B. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2009-07-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Institutional failure: are safety management systems the answer?

International Nuclear Information System (INIS)

Waddington, J.G.; Lafortune, J.F.; Duffey, R.B.

2009-01-01

In spite of an overwhelming number of safety management programs, incidents and accidents that could seemingly, in hindsight, have been prevented, still occur. Institutional failure is seen as a major contributor in almost all cases. With the anticipated significant increase in the number of nuclear plants around the world, a drastic step in the way we manage safety is deemed essential to further reduce the currently already very low rate of accidents to levels that will not cause undue public concern and threaten the success of the nuclear 'renaissance'. To achieve this, many industries have already started implementing a Safety Management System (SMS) approach, aimed at harmonizing, rationalizing and integrating management processes, safety culture and operational risk assessment. This paper discusses the origins and the nature of SMS based in part on the experience of the aviation industry, and shows how SMS is poised to be the next generation in the way the nuclear industry manages safety. It also discusses the need for better direct measures of risk to demonstrate the success of SMS implementation. (author)

Development of a Safety Management Web Tool for Horse Stables.

Science.gov (United States)

Leppälä, Jarkko; Kolstrup, Christina Lunner; Pinzke, Stefan; Rautiainen, Risto; Saastamoinen, Markku; Särkijärvi, Susanna

2015-11-12

Managing a horse stable involves risks, which can have serious consequences for the stable, employees, clients, visitors and horses. Existing industrial or farm production risk management tools are not directly applicable to horse stables and they need to be adapted for use by managers of different types of stables. As a part of the InnoEquine project, an innovative web tool, InnoHorse, was developed to support horse stable managers in business, safety, pasture and manure management. A literature review, empirical horse stable case studies, expert panel workshops and stakeholder interviews were carried out to support the design. The InnoHorse web tool includes a safety section containing a horse stable safety map, stable safety checklists, and examples of good practices in stable safety, horse handling and rescue planning. This new horse stable safety management tool can also help in organizing work processes in horse stables in general.

Estimating and controlling workplace risk: an approach for occupational hygiene and safety professionals.

Science.gov (United States)

Toffel, Michael W; Birkner, Lawrence R

2002-07-01

The protection of people and physical assets is the objective of health and safety professionals and is accomplished through the paradigm of anticipation, recognition, evaluation, and control of risks in the occupational environment. Risk assessment concepts are not only used by health and safety professionals, but also by business and financial planners. Since meeting health and safety objectives requires financial resources provided by business and governmental managers, the hypothesis addressed here is that health and safety risk decisions should be made with probabilistic processes used in financial decision-making and which are familiar and recognizable to business and government planners and managers. This article develops the processes and demonstrates the use of incident probabilities, historic outcome information, and incremental impact analysis to estimate risk of multiple alternatives in the chemical process industry. It also analyzes how the ethical aspects of decision-making can be addressed in formulating health and safety risk management plans. It is concluded that certain, easily understood, and applied probabilistic risk assessment methods used by business and government to assess financial and outcome risk have applicability to improving workplace health and safety in three ways: 1) by linking the business and health and safety risk assessment processes to securing resources, 2) by providing an additional set of tools for health and safety risk assessment, and 3) by requiring the risk assessor to consider multiple risk management alternatives.

Risk Assessment in the UK Health and Safety System: Theory and Practice

Directory of Open Access Journals (Sweden)

Karen Russ

2010-09-01

Full Text Available In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP. How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

Risk Assessment in the UK Health and Safety System: Theory and Practice.

Science.gov (United States)

Russ, Karen

2010-09-01

In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP). How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

THE MANAGEMENT OF RISKS IN BUSINESS AND IN THE MANAGEMENT OF HUMAN RESOURCES

Directory of Open Access Journals (Sweden)

Reta CONDEI

2014-10-01

Full Text Available The characteristics of market economy and coordinates of modern life have determinate both individual level and organizations increase of number of risk who can affect us, of their dimensions and of the consequences which induce them, but at the same time a highest need of firm security. In economic and financial department was develop an entire area –management risk and many financial instruments to reduce or diminish risk. The behaviour of economical agents respectively of the entrepreneurs and managers is different according to the risk in many respects: risk adversaries unaffected to risk and risk belovers who leave mark on decisions take it. Management risk is an cyclical process with distinct stages: risk identification, risk analyses and risk reactions. The management of this phenomenon goes from this context and the firm objectives, analyse the risk factors into a security conception having the purpose to minimize the risks and the cost. The policies of occupational safety and health at the level of the organization must include information regarding: the general security and health policy at work; the specific risks and the way of dealing with them; the responsibility of the managers in this field; the measures of implementation of these policies and must be based on: Employee safety is very important; Safety is prior to efficiency; Employee safety leads to advantages and efficiency; Respecting the regulations

Safety and human factors impacts of introducing quality management into high-risk industries: A field study

International Nuclear Information System (INIS)

Chollet, M.G.; Normier, C.; Girault, M.; Tasset, D.

2002-01-01

The Institute for Radiological Protection and Nuclear Safety has undertaken a study for getting a better understanding, especially in terms of Safety and Human Factors, of the changes caused by the progressive deployment of the Quality Management in French high risk industries. This study is based on both theoretical elements from the human sciences and management and practical elements from the field, collected from interviews in large French industrial sites involved in integrating this management method. The results show frequent discrepancies between theory, which is very positive and production-oriented, and reality, which is more complex and subtle, ever looking for trade-offs between production requirements and safety constraints. Thus, each step forward announced in the literature may be matched by possible steps backward in terms of safety on the ground. Where, in theory, processes enable practices to be mastered, in practice they can reduce autonomy and fossilize know-how. Where theoretically continuous improvement stimulates and strengthens performances, in reality it can also generate stress and deadlock. Where theoretically personal commitment and collective responsibility work towards all-out performance, in reality they can also operate to conceal safety deviations and infringements. The assessment of Quality Management processes in the nuclear field will benefit from these results raised from theoretical review and confirmed by similar management changes. (author)

CEA - Assessment of risk management for 2012

International Nuclear Information System (INIS)

Bonnevie, Edwige

2013-06-01

This report proposes an overview of the main events, actions performed by the CEA, and facts for 2012 regarding protection and monitoring of the environment, installation safety, occupational health and safety, radiological protection of workers, transportation of hazardous materials, waste management, protection of sites, installations and heritage, emergency situation management, legal risk management, internal controls and audits. It also presents the organisation and action of the risk management department within the CEA

Perspectives: Intellectual Risk Management

Science.gov (United States)

Hall, James C.

2013-01-01

Ask a college administrator about students and risk management, and you're likely to get a quick and agitated speech about alcohol consumption and bad behavior or a meditation on mental health and campus safety. But in colleges and universities, we manage intellectual risk-taking too. Bring that up, and you'll probably get little out of that same…

Management of construction safety at KKNPP site

International Nuclear Information System (INIS)

Khare, P.K.

2016-01-01

Construction is considered as one of the most hazardous activities owing to the number of accidents and injuries. At KKNPP, management of industrial safety has been envisaged since the preliminary stage of construction planning, including design aspects. The governing principles of safety management are evolved from the Factories Act, 1948, the Atomic Energy(Factories) Rules, 1996, AERB safety guidelines on Control of works (2011) and Corporate HSE policy of NPCIL (2014). Numerous risk assessment and hazard control measures are adopted consistently to ensure a safe work environment during the construction, which includes Job Hazard Analysis, work permit through Computerized Maintenance Management System, safety procedures, exclusive safety training facility for the contractor's workmen, safety motivational measures, safety surveillance and reporting through Safety Related Deficiencies Management System. Assessment of efficacy of safety management system is continuously done through safety audits and observations are being circulated and discussed in committee meetings. Fire safety is also being taken care of since inception of project work. Well-equipped fire station with trained fire fighters was made available since the beginning as per AERB safety standard on fire protection system for Nuclear facilities. Fire prevention measures specific to the work are implemented during all activities. (author)

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes

Directory of Open Access Journals (Sweden)

Serena Lucrezi

2018-03-01

Full Text Available Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers’ and dive centres’ perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry.Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety.Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres’ perceptions of safety in part aligned with those of scuba divers, with some exceptions.Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes

Science.gov (United States)

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers’ and dive centres’ perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres’ perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes.

Science.gov (United States)

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers' and dive centres' perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres' perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention campaigns

The total theory about risk management

International Nuclear Information System (INIS)

Furuya, Shunsuke

2003-01-01

A general working procedure of risk management, some example of other countries, topics and problems in the future are described. A definition of risk, risk assessment, risk management process, setting of aim and definite policy are explained. As a fundamental way of thinking, risk is controlled by ALARP (As Low As Reasonably Practicable). The upper and lower limit of risk level is called as Quantitative Safety Goal and Target Level of Safety, respectively. These limits in the atomic power and airplane are decided. Evaluation of risk, countermeasure and practice are explained. For example, a permissible range of risk and practical use in England, U.S.A, Holland and Japan are stated. Recently, accountability risk, missing demand risk and control risk are important. (S.Y.)

Managing occupational risk in creative practice: a new perspective for occupational health and safety.

Science.gov (United States)

Oughton, Nicholas

2013-01-01

There has been little recognition of the fact that creative production operates in a somewhat different environment and timeframe to that associated with traditional industries. This has resulted in the application of an orthodox, generic or ``one size fits all'' framework of Occupational Health and Safety (OHS) systems across all industries. With the rapid growth of ``creative industry,'' certain challenges arise from the application of this "generic" strategy, mainly because the systems currently employed may not be entirely suitable for creative practice. Some OHS practitioners suggest that the current OHS paradigm is failing. This paper questions the appropriateness of applying a twentieth century OHS model in the present industrial context, and considers what framework will best provide for the well-being of creative workers and their enterprise in the twenty-first century. The paper questions the notion of "Risk" and the paradox associated with "Risk Management," particularly in the context of the creative process. Clearly, risk taking contributes to creative enterprise and effective risk management should accommodate both risk minimization and risk exploitation.

Radiation risk management at DOE accelerator facilities

International Nuclear Information System (INIS)

Dyck, O.B. van.

1997-01-01

The DOE accelerator contractors have been discussing among themselves and with the Department how to improve radiation safety risk management. This activity-how to assure prevention of unplanned high exposures-is separate from normal exposure management, which historically has been quite successful. The ad-hoc Committee on the Accelerator Safety Order and Guidance [CASOG], formed by the Accelerator Section of the HPS, has proposed a risk- based approach, which will be discussed. Concepts involved are risk quantification and comparison (including with non-radiation risk), passive and active (reacting) protection systems, and probabilistic analysis. Different models of risk management will be presented, and the changing regulatory environment will also be discussed

Identifying and Managing Risk.

Science.gov (United States)

Abraham, Janice M.

1999-01-01

The role of the college or university chief financial officer in institutional risk management is (1) to identify risk (physical, casualty, fiscal, business, reputational, workplace safety, legal liability, employment practices, general liability), (2) to develop a campus plan to reduce and control risk, (3) to transfer risk, and (4) to track and…

The Attitude of Civil Engineering Students towards Health and Safety Risk Management: A Case Study

Science.gov (United States)

Petersen, A. K.; Reynolds, J. H.; Ng, L. W. T.

2008-01-01

The highest rate of accidents and injuries in British industries has been reported by the construction industry during the past decade. Since then stakeholders have recognised that a possible solution would be to inculcate a good attitude towards health and safety risk management in undergraduate civil engineering students and construction…

Safety Risk Knowledge Elicitation in Support of Aeronautical R and D Portfolio Management: A Case Study

Science.gov (United States)

Shih, Ann T.; Ancel, Ersin; Jones, Sharon Monica; Reveley, Mary S.; Luxhoj, James T.

2012-01-01

Aviation is a problem domain characterized by a high level of system complexity and uncertainty. Safety risk analysis in such a domain is especially challenging given the multitude of operations and diverse stakeholders. The Federal Aviation Administration (FAA) projects that by 2025 air traffic will increase by more than 50 percent with 1.1 billion passengers a year and more than 85,000 flights every 24 hours contributing to further delays and congestion in the sky (Circelli, 2011). This increased system complexity necessitates the application of structured safety risk analysis methods to understand and eliminate where possible, reduce, and/or mitigate risk factors. The use of expert judgments for probabilistic safety analysis in such a complex domain is necessary especially when evaluating the projected impact of future technologies, capabilities, and procedures for which current operational data may be scarce. Management of an R&D product portfolio in such a dynamic domain needs a systematic process to elicit these expert judgments, process modeling results, perform sensitivity analyses, and efficiently communicate the modeling results to decision makers. In this paper a case study focusing on the application of an R&D portfolio of aeronautical products intended to mitigate aircraft Loss of Control (LOC) accidents is presented. In particular, the knowledge elicitation process with three subject matter experts who contributed to the safety risk model is emphasized. The application and refinement of a verbal-numerical scale for conditional probability elicitation in a Bayesian Belief Network (BBN) is discussed. The preliminary findings from this initial step of a three-part elicitation are important to project management practitioners as they illustrate the vital contribution of systematic knowledge elicitation in complex domains.

Some international perspectives on legislation for the management of human-induced safety risks

Directory of Open Access Journals (Sweden)

Alfonso Niemand

2016-01-01

Full Text Available Legislation that governs the health and safety of communities near major-hazard installations in South Africa is largely based on existing legislation that had been developed in the United Kingdom and other European Union countries. The latter was developed as a consequence of several major human-induced technological disasters in Europe. The history of the evolution of health-and-safety legislation for the protection of vulnerable communities in European Union (EU countries, France, Malaysia and the USA is explored through a literature survey. A concise comparison is drawn between EU countries, the USA and South Africa to obtain an exploratory view of whether current South-African legislation represents an optimum model for the protection of the health-and-safety of workers and communities near major-hazard installations. The authors come to the conclusion that South-African legislation needs revision as was done in the UK in 2011. Specific areas in the legislation that need revision are an overlap between occupational health and safety and environmental legislation, appropriate land-use planning for the protection of communities near major-hazard installations, the inclusion of vulnerability studies and the refinement of appropriate decision-making instruments such as risk assessment. This article is the first in a series that forms part of a broader study aimed at the development of an optimised model for the regulatory management of human-induced health and safety risks associated with hazardous installations in South Africa.

Safety Risk Management for Homeland Defense and Security Responders

National Research Council Canada - National Science Library

Meyers, Tommey H

2005-01-01

.... Coast Guard and the U.S. Navy. This revealed that Operational Risk Management (ORM), a risk-based decision-making tool that systematically balances risk and mission completion, and Crew Resource Management (CRM...

International comparative analyses of healthcare risk management.

Science.gov (United States)

Sun, Niuyun; Wang, Li; Zhou, Jun; Yuan, Qiang; Zhang, Zongjiu; Li, Youping; Liang, Minghui; Cheng, Lan; Gao, Guangming; Cui, Xiaohui

2011-02-01

Interpretation of the growing body of global literature on health care risk is compromised by a lack of common understanding and language. This series of articles aims to comprehensively compare laws and regulations, institutional management, and administration of incidence reporting systems on medical risk management in the United Kingdom, the United States, Canada, Australia, and Taiwan, so as to provide evidence and recommendations for health care risk management policy in China. We searched the official websites of the healthcare risk management agencies of the four countries and one district for laws, regulatory documents, research reports, reviews and evaluation forms concerned with healthcare risk management and assessment. Descriptive comparative analysis was performed on relevant documents. A total of 146 documents were included in this study, including 2 laws (1.4%), 17 policy documents (11.6%), 41 guidance documents (28.1%), 37 reviews (25.3%), and 49 documents giving general information (33.6%). The United States government implemented one law and one rule of patient safety management, while the United Kingdom and Australia each issued professional guidances on patient safety improvement. The four countries implemented patient safety management policy on four different levels: national, state/province, hospital, and non-governmental organization. The four countries and one district adopted four levels of patient safety management, and the administration modes can be divided into an "NGO-led mode" represented by the United States and Canada and a "government-led mode" represented by the United Kingdom, Australia, and Taiwan. © 2011 Blackwell Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

Nuclear risk management

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This paper gives the list of contributions to Eurosafe 2001 which was organised around two round tables on the first day and five seminars on the second day. The first round table dealt with the technical, organisational and societal aspects of risk management aimed at the prevention of accidents in nuclear power plants. The second round table focused on radiological risks from the normal operation of nuclear installations. Special consideration has been given to the involvement of stakeholders. The five seminars were held in order to provide opportunities for comparing experiences and learning about recent activities of IRSN, GRS and their partners in the European Union and Eastern Europe: - Safety assessment and analysis of nuclear installations; -Nuclear safety research; -Environment and radiation protection; - Waste management; - Nuclear material security. (author)

Nuclear risk management

International Nuclear Information System (INIS)

2001-01-01

This paper gives the list of contributions to Eurosafe 2001 which was organised around two round tables on the first day and five seminars on the second day. The first round table dealt with the technical, organisational and societal aspects of risk management aimed at the prevention of accidents in nuclear power plants. The second round table focused on radiological risks from the normal operation of nuclear installations. Special consideration has been given to the involvement of stakeholders. The five seminars were held in order to provide opportunities for comparing experiences and learning about recent activities of IRSN, GRS and their partners in the European Union and Eastern Europe: - Safety assessment and analysis of nuclear installations; -Nuclear safety research; -Environment and radiation protection; - Waste management; - Nuclear material security. (author)

Management by process based systems and safety focus

International Nuclear Information System (INIS)

Rydnert, Bo; Groenlund, Bjoern

2005-12-01

An initiative from The Swedish Nuclear Power Inspectorate led to this study carried out in the late autumn of 2005. The objective was to understand in more detail how an increasing use of process management affects organisations, on the one hand regarding risks and security, on the other hand regarding management by objectives and other management and operative effects. The main method was interviewing representatives of companies and independent experts. More than 20 interviews were carried out. In addition a literature study was made. All participating companies are using Management Systems based on processes. However, the methods chosen, and the results achieved, vary extensively. Thus, there are surprisingly few examples of complete and effective management by processes. Yet there is no doubt that management by processes is effective and efficient. Overall goals are reached, business results are achieved in more reliable ways and customers are more satisfied. The weaknesses found can be translated into a few comprehensive recommendations. A clear, structured and acknowledged model should be used and the processes should be described unambiguously. The changed management roles should be described and obeyed extremely legibly. New types of process objectives need to be formulated. In addition one fact needs to be observed and effectively fended off. Changes are often met by mental opposition on management level, as well as among co-workers. This fact needs attention and leadership. Safety development is closely related to the design and operation of a business management system and its continual improvement. A deep understanding of what constitutes an efficient and effective management system affects the understanding of safety. safety culture and abilities to achieve safety goals. Concerning risk, the opinions were unambiguous. Management by processes as such does not result in any further risks. On the contrary. Processes give a clear view of production and

Management capacity to promote nurse workplace health and safety.

Science.gov (United States)

Fang, Yaxuan; McDonald, Tracey

2018-04-01

To investigate regarding workplace health and safety factors, and to identify strategies to preserve and promote a healthy nursing workplace. Data collected using the Delphi technique with input from 41 key informants across four participant categories drawn from a Chinese university and four hospitals were thematically analysed. Most respondents agreed on the importance of nurses' health and safety, and that nurse managers should act to protect nurses, but not enough on workplace safety. Hospital policies, staff disempowerment, workload and workplace conflicts are major obstacles. The reality of Chinese nurses' workplaces is that health and safety risks abound and relate to socio-cultural expectations of women. Self-management of risks is neccessary, gaps exist in understanding of workplace risks among different nursing groups and their perceptions of the professional status, and the value of nurses' contribution to ongoing risks in the hospital workplace. The Chinese hospital system must make these changes to produce a safer working environment for nurses. This research, based in China, presents an instructive tale for all countries that need support on the types and amounts of management for nurses working at the clinical interface, and on the consequences of management neglect of relevant policies and procedures. © 2017 John Wiley & Sons Ltd.

Risk measures in living probabilistic safety assessment

International Nuclear Information System (INIS)

Holmberg, J.; Niemelae, I.

1993-05-01

The main objectives of the study are: to define risk measures and suggested uses of them in various living PSA applications for the operational safety management and to describe specific model features required for living PSA applications. The report is based on three case studies performed within the Nordic research project Safety Evaluation by Use of Living PSA and Safety Indicators. (48 refs., 11 figs., 17 tabs.)

Personnel Risks in Ensuring Safety of Medical Activity

Directory of Open Access Journals (Sweden)

O. L. Zadvornaya

2017-01-01

Full Text Available Purpose: modern strategies of management of the organization require the formation of special management approaches based on the analysis of the mechanisms and processes of the organization of medical activities related to possible risks in activity of medical personnel. Based on international experience and own research the authors have identified features of a system of management of personnel risk in medical activities, examined approaches showing the sequence and contents of the main practical activities of the formation, maintenance and development of the system of management of personnel risks. Emphasized is the need for further research and implementation of the system of management of personnel risk in health care organizations. Study and assessment of personnel risks affecting the security of medical activities aimed at the development of the system of personnel risk management, development of a system of identification and monitoring of HR risk indicators with a purpose to improve institutional management and increase efficiency of activity of medical organizations. Methods: in the present study, the following methods were used: systemic approach, content analysis, methods of social diagnosis (questionnaires, interviews, comparative analysis, method of expert evaluations, method of statistical processing of information. Results: approaches to predict the occurrence and development of personnel risks have been reviewed and proposed. Conclusions and Relevance: patient safety is a global issue affecting countries at all levels of development. Each year, the WHO identifies a number of systemic and technical aspects and trends in the field of patient safety related to actions of medical workers. Existing imbalances in the staffing of the health system of the Russian Federation increase the probability of potential risks in medical practice. The personnel policy of healthcare of the Russian Federation requires further improvement and

[What Surgeons Should Know about Risk Management].

Science.gov (United States)

Strametz, R; Tannheimer, M; Rall, M

2017-02-01

Background: The fact that medical treatment is associated with errors has long been recognized. Based on the principle of "first do no harm", numerous efforts have since been made to prevent such errors or limit their impact. However, recent statistics show that these measures do not sufficiently prevent grave mistakes with serious consequences. Preventable mistakes such as wrong patient or wrong site surgery still frequently occur in error statistics. Methods: Based on insight from research on human error, in due consideration of recent legislative regulations in Germany, the authors give an overview of the clinical risk management tools needed to identify risks in surgery, analyse their causes, and determine adequate measures to manage those risks depending on their relevance. The use and limitations of critical incident reporting systems (CIRS), safety checklists and crisis resource management (CRM) are highlighted. Also the rationale for IT systems to support the risk management process is addressed. Results/Conclusion: No single tool of risk management can be effective as a standalone instrument, but unfolds its effect only when embedded in a superordinate risk management system, which integrates tailor-made elements to increase patient safety into the workflows of each organisation. Competence in choosing adequate tools, effective IT systems to support the risk management process as well as leadership and commitment to constructive handling of human error are crucial components to establish a safety culture in surgery. Georg Thieme Verlag KG Stuttgart · New York.

Integrated Management System Incorporating Quality Management and Management of Environment, Health and Occupational Safety

International Nuclear Information System (INIS)

Manchev, B.; Nenkova, B.; Tomov, E.

2012-01-01

Risk Engineering Ltd is a Bulgarian private company founded in 1990 to provide engineering and consulting services applicable to each and every field of the energy sector. Since its establishment Risk Engineering Ltd develops, implement and apply a System for quality assurance, certified for the first time by BVQI (now Bureau Veritas Certification) in 1999 for conformity with the standard ISO 9001:1994. Later on, in connection with the revision of the standards of ISO 9000 series and introduction of the standard ISO 9001:2000 a Quality Management System in conformity with the standard ISO 9001:2000 was developed, introduced and certified. At present, Risk Engineering Ltd has got developed, documented, introduced and certified by Lloyd's Register Quality Assurance (LRQA) Quality Management System in compliance with ISO 9001:2008 on the process approach basis. On this basis and including the requirements of the ISO 14001:2004 (regarding the environment) and OHSAS 18001:2007 (regarding the health and occupational safety), Risk Engineering Ltd has developed and introduced Integrated Management System aim at achieving and demonstrating good results regarding protection of the environment, health and occupational safety. The processes under control by the Integrated Management System and applicable at the company are divided in two general types: A) Management processes: Strategic management and Management of the human resources. B) Processes describing the main activities: design/development process; project management; management of industrial projects and technical infrastructure project; construction, installation, repair and operation of power industry facilities; commercial activities and marketing; investigation of energy efficiency of industrial systems and certification of buildings regarding energy efficiency; consulting activity in the field of industry and energy as well as consultant in accordance with the Law of the Spatial Planning; management of the

Packaging and transportation risk management and evaluation plan

International Nuclear Information System (INIS)

Rhyne, W.R.

1993-09-01

Shipments of radioactive materials and hazardous chemicals at the Los Alamos National Laboratory (LANL) are governed by a variety of Federal and state regulations, industrial standards, and LANL processes and procedures. Good judgement is exercised in situations that are not covered by regulations. As a result, the safety record for transporting hazardous materials at LANL has been excellent. However, future decisions should be made such that the decision-making process produces a defensible record of the safety of onsite shipments. This report proposes the development of a risk management tool to meet this need. First, the application of quantitative risk analysis methodology to transportation is presented to provide a framework of understanding. Risk analysis definitions, the basic quantitative risk analysis procedure, quantitative methodologies, transportation data bases, and risk presentation techniques are described. Quantitative risk analysis is frequently complex; but simplified approaches can be used as a management tool to make good decisions. Second, a plan to apply the use of risk management principles to the selection of routes, special administrative controls, and containers for hazardous material transportation at LANL is provided. A risk management tool is proposed that can be used by MAT-2 without substantial support from specialized safety and risk analysis personnel, e.g., HS-3. A workbook approach is proposed that can be automated at a later date. The safety of some types of onsite shipments at LANL is not well documented. Documenting that shipments are safe, i.e., present acceptable risks, will likely require elaborate analyses that should be thoroughly reviewed by safety and risk professionals. These detailed analyses are used as benchmarks and as examples for the use of the proposed tool by MAT-2. Once the benchmarks are established, the workbook can be used by MAT-2 to quantify that safety goals are met by similar shipments

Comprehensive safety cases for radioactive waste management facilities

International Nuclear Information System (INIS)

Woollam, P.B.; Cameron, H.M.; Davies, A.R.; Hiscox, A.W.

1995-01-01

Probabilistic safety assessment methodology has been applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

Underground risk management information systems

Energy Technology Data Exchange (ETDEWEB)

Matsuyama, S.; Inoue, M.; Sakai, T.

2006-03-15

JCOAL has conducted Joint Research on an Underground Communication and Risk Management Information System with CSIRO of Australia under a commissioned study project for the promotion of coal use starting in fiscal 2002. The goal of this research project is the establishment of a new Safety System focusing on the comprehensive risk management information system by the name of Nexsys. The main components of the system are the Ethernet type underground communication system that represents the data communication base, and the risk management information system that permits risk analysis in real-time and provides decision support based on the collected data. The Nexsys is an open system and is a core element of the underground monitoring system. Using a vast amount of underground data, it is capable of accommodating a wide range of functions that were not available in the past. Because of it, it is possible to construct an advanced underground safety system. 14 figs., 4 tabs.

Safety of light water reactors. Risks of nuclear technology

International Nuclear Information System (INIS)

Veser, Anke; Schlueter, Franz-Hermann; Raskob, Wolfgang; Landman, Claudia; Paesler-Sauer, Juergen; Kessler, Guenter

2012-01-01

The book on the safety of light-water reactors includes the following chapters: Part I: Physical and technical safety concept of actual German and future European light-water reactors: (1) Worldwide operated nuclear power plants in 2011, (2) Some reactor physical fundamentals. (3) Nuclear power plants in Germany. (4) Radioactive exposure due to nuclear power plants. (5) Safety concept of light-water reactors. (6) Probabilistic analyses and risk studies. (7) Design of light-water reactors against external incidents. (8) Risk comparison of nuclear power plants and other energy systems. (9) Evaluation of risk studies using the improved (new) safety concept for LWR. (19) The severe reactor accidents of Three Mile Island, Chernobyl and Fukushima. Part II: Safety of German LWR in case of a postulated aircraft impact. (11) Literature. (12) Review of requirements and actual design. (13) Incident scenarios. (14) Load approach for aircraft impact. (15) Demonstration of the structural behavior in case of aircraft impact. (16) Special considerations. (17) Evaluation of the safety state of German and foreign nuclear power plants. Part III: ROSOS as example for a computer-based decision making support system for the severe accident management. (19) Literature. (20) Radiological fundamentals, accident management, modeling of the radiological situation. (21) The decision making support system RODOS. (22) RODOS and the Fukushima accident. (23) Recent developments in the radiological emergency management in the European frame.

Application of Risk Management for Control and Monitoring Systems

CERN Document Server

Grau, S; Balda, F; Chouvelon, A

2001-01-01

This paper presents an application of the state of the art and new trends for risk management of safety-related control and monitoring systems, currently applied in the industry. These techniques not only enable to manage safety and reliability issues but they also help in the control of quality and economic factors affected by the availability and maintenance of the system. The method includes an unambiguous definition of the system in terms of functions and a systematic analysis of hazardous situations, undesired events and possible malfunctions. It also includes the identification and quantification of the risk associated to the system. The required risk reduction is specified in terms of safety integrity levels. The safety integrity level results in requirements, preventive measures, possible improvements and recommendations to assure the satisfactory management of the risk.

Engineered nanomaterials: toward effective safety management in research laboratories.

Science.gov (United States)

Groso, Amela; Petri-Fink, Alke; Rothen-Rutishauser, Barbara; Hofmann, Heinrich; Meyer, Thierry

2016-03-15

It is still unknown which types of nanomaterials and associated doses represent an actual danger to humans and environment. Meanwhile, there is consensus on applying the precautionary principle to these novel materials until more information is available. To deal with the rapid evolution of research, including the fast turnover of collaborators, a user-friendly and easy-to-apply risk assessment tool offering adequate preventive and protective measures has to be provided. Based on new information concerning the hazards of engineered nanomaterials, we improved a previously developed risk assessment tool by following a simple scheme to gain in efficiency. In the first step, using a logical decision tree, one of the three hazard levels, from H1 to H3, is assigned to the nanomaterial. Using a combination of decision trees and matrices, the second step links the hazard with the emission and exposure potential to assign one of the three nanorisk levels (Nano 3 highest risk; Nano 1 lowest risk) to the activity. These operations are repeated at each process step, leading to the laboratory classification. The third step provides detailed preventive and protective measures for the determined level of nanorisk. We developed an adapted simple and intuitive method for nanomaterial risk management in research laboratories. It allows classifying the nanoactivities into three levels, additionally proposing concrete preventive and protective measures and associated actions. This method is a valuable tool for all the participants in nanomaterial safety. The users experience an essential learning opportunity and increase their safety awareness. Laboratory managers have a reliable tool to obtain an overview of the operations involving nanomaterials in their laboratories; this is essential, as they are responsible for the employee safety, but are sometimes unaware of the works performed. Bringing this risk to a three-band scale (like other types of risks such as biological, radiation

Comprehensive safety cases for radioactive waste management facilities

International Nuclear Information System (INIS)

Woollam, P.B.

1993-01-01

Probabilistic safety assessment methodology is being applied by Nuclear Electric plc (NE) to the development of comprehensive safety cases for the radioactive waste management processing and accumulation facilities associated with its 26 reactor systems. This paper describes the methodology and the safety case assessment criteria employed by NE. An overview of the results from facilities used by the first 16 reactors is presented, together with more detail of a specific safety analysis: storage of fuel element debris. No risk to the public greater than 10 -6 /y has been identified and the more significant risks arise from the potential for radioactive waste fires. There are no unacceptable risks from external hazards such as flooding, aircrash or seismic events. Some operations previously expected to have significant risks in fact have negligible risks, while the few faults with risks exceeding the assessment criteria were only identified as a result of this study

Risk assessment and safety regulations in offshore oil and gas ...

African Journals Online (AJOL)

Risk management of which risk assessment is part, and safety regulations are common in the offshore oil and gas industry management system. The process of conducting risk assessment is mostly a challenge for operational personnel assigned to perform this function. The most significant problem is the decision to use ...

75 FR 36427 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Science.gov (United States)

2010-06-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice...

A global approach to risk management: lessons from the nuclear industry

International Nuclear Information System (INIS)

Lazo, T.; Kaufer, B.

2003-01-01

The industry's nuclear safety experts are continuously striving to minimise the possible risk and extent of a nuclear accident, while nuclear regulatory, authorities work to ensure that all safety requirements are met. Relying on a combination of deterministic and probabilistic approaches, they are obtaining positive results in terms of both risk-informed regulation and nuclear safety management. This article addresses this aspect of risk management, as well as the management of radiation exposure risk. It looks into nuclear emergency planning, preparedness and management, and stresses the importance of coordinating potential protection approaches and providing effective communication should a nuclear accident occur. (authors)

Safety management in the industry

International Nuclear Information System (INIS)

Jaecklin, A.

1996-01-01

The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

Benchmarking Global Food Safety Performances: The Era of Risk Intelligence.

Science.gov (United States)

Valleé, Jean-Charles Le; Charlebois, Sylvain

2015-10-01

Food safety data segmentation and limitations hamper the world's ability to select, build up, monitor, and evaluate food safety performance. Currently, there is no metric that captures the entire food safety system, and performance data are not collected strategically on a global scale. Therefore, food safety benchmarking is essential not only to help monitor ongoing performance but also to inform continued food safety system design, adoption, and implementation toward more efficient and effective food safety preparedness, responsiveness, and accountability. This comparative study identifies and evaluates common elements among global food safety systems. It provides an overall world ranking of food safety performance for 17 Organisation for Economic Co-Operation and Development (OECD) countries, illustrated by 10 indicators organized across three food safety risk governance domains: risk assessment (chemical risks, microbial risks, and national reporting on food consumption), risk management (national food safety capacities, food recalls, food traceability, and radionuclides standards), and risk communication (allergenic risks, labeling, and public trust). Results show all countries have very high food safety standards, but Canada and Ireland, followed by France, earned excellent grades relative to their peers. However, any subsequent global ranking study should consider the development of survey instruments to gather adequate and comparable national evidence on food safety.

Identification and evaluation of priorities in the business process of a risk or safety organization

International Nuclear Information System (INIS)

Teng, Kuei-Yung; Thekdi, Shital A.; Lambert, James H.

2012-01-01

Agencies are increasingly following principles and guidelines for the coordination of risk assessment, risk management, and risk communication in large-scale programs. In particular, there is a challenge to comply with the U.S. Office of Management and Budget (OMB) memorandum “Updated Principles for Risk Analysis” among other guidelines. This paper demonstrates a systemic approach to achieve compliance of a risk program with administrative and organizational principles and guidelines for risk analysis. The paper suggests three canonical questions as the mission of such a program: (i) what sources of risks are to be managed by the program, (ii) how should multiple risk assessment, risk management, and risk communication activities be administered and coordinated, and what should be the basis for resource allocation to these activities, and (iii) how will the performance of the program be monitored and evaluated. The paper demonstrates a re-prioritization of policy initiatives of the program based on emergent and future conditions. The approach is useful to agencies implementing risk or safety organizational guidelines such as those of the OMB, the US Government Accountability Office, the US Department of Homeland Security, the US Department of Defense, and others. This paper will be of interest to risk managers; agencies; and risk and safety analysts engaged in the conception, implementation, and evaluation of risk or safety programs. - Highlights: ► We develop a systemic approach for management of a risk or safety program. ► The approach includes business process models and policy prioritization. ► The results support organizations to implement risk and safety programs.

DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

Energy Technology Data Exchange (ETDEWEB)

William E. Kastenberg; Edward Blandford; Lance Kim

2009-03-31

This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

International Nuclear Information System (INIS)

Kastenberg, William E.; Blandford, Edward; Kim, Lance

2009-01-01

This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public

Managing risks

International Nuclear Information System (INIS)

Nathwani, J.S.

1993-01-01

The three principles to guide regulating authorities are: Risks shall be managed to maximize the total expected net benefit to society; The safety benefit to be promoted is quality-adjusted life expectancy; Decisions for the public in regard to health and safety must be open and apply across the entire range of hazards to life and health. Based on the principle that excessive spending on health and safety, or lack of necessary development, may cause poverty and thereby actually decrease (adjusted) life expectancy, the author has developed a Life Product Index which gives comparable results to the Human Development Index promoted by the United Nations Development Program. These two social indicators can be used for purposes such as project evaluation, choosing between alternative technologies, or evaluation of health and safety programs

Project safety studies - nuclear waste management (PSE)

International Nuclear Information System (INIS)

1981-10-01

The project 'Safety Studies-Nuclear Waste Management' (PSE) is a research project performed by order of the Federal Minister for Research and Technology, the general purpose of which is to deepen and ensure the understanding of the safety aspects of the nuclear waste management and to prepare a risk analysis which will have to be established in the future. Owing to this the project is part of a series of projects which serve the further development of the concept of nuclear waste management and its safety, and which are set up in such a way as to accompany the realization of that concept. This report contains the results of the first stage of the project from 1978 to mid-1981. (orig./RW) [de

When bad things happen: adverse event reporting and disclosure as patient safety and risk management tools in the neonatal intensive care unit.

Science.gov (United States)

Donn, Steven M; McDonnell, William M

2012-01-01

The Institute of Medicine has recommended a change in culture from "name and blame" to patient safety. This will require system redesign to identify and address errors, establish performance standards, and set safety expectations. This approach, however, is at odds with the present medical malpractice (tort) system. The current system is outcomes-based, meaning that health care providers and institutions are often sued despite providing appropriate care. Nevertheless, the focus should remain to provide the safest patient care. Effective peer review may be hindered by the present tort system. Reporting of medical errors is a key piece of peer review and education, and both anonymous reporting and confidential reporting of errors have potential disadvantages. Diagnostic and treatment errors continue to be the leading sources of allegations of malpractice in pediatrics, and the neonatal intensive care unit is uniquely vulnerable. Most errors result from systems failures rather than human error. Risk management can be an effective process to identify, evaluate, and address problems that may injure patients, lead to malpractice claims, and result in financial losses. Risk management identifies risk or potential risk, calculates the probability of an adverse event arising from a risk, estimates the impact of the adverse event, and attempts to control the risk. Implementation of a successful risk management program requires a positive attitude, sufficient knowledge base, and a commitment to improvement. Transparency in the disclosure of medical errors and a strategy of prospective risk management in dealing with medical errors may result in a substantial reduction in medical malpractice lawsuits, lower litigation costs, and a more safety-conscious environment. Thieme Medical Publishers, Inc.

Safety management and public spaces: restoring balance.

Science.gov (United States)

Ball, David J; Ball-King, Laurence

2013-05-01

Since 2000, the reputation of health and safety in the United Kingdom has been tarnished, so much so that it has become the subject of both a media circus and a government inquiry. This not only threatens the worthy goals of health and safety, but also impacts upon the associated tool of risk assessment itself such that "risk assessment" is increasingly seen by the public at large as a term inviting ridicule, even abuse. The main thrust of the government's examination of health and safety has been its concern that safety requirements were placing a disproportionate burden on business. However, there is another source of discontent, which is public chagrin over the impact of injury control measures upon life beyond the conventional workplace, in particular upon the public spaces that people frequent in their leisure time and on the activities they engage in there. This article provides a perspective on this second dimension of the crisis in confidence. It describes how many U.K. agencies with responsibilities for a wide portfolio of public amenities ranging from the provision of play spaces for the young to the management of publicly accessible countryside, the maintenance of urban and rural trees, the stewardship of sites of cultural heritage, and the pursuit of outdoor educational activities have responded to some conflicts posed to their services by the new safety culture. It concludes with a discussion of implications for the management of public space and for risk assessment itself. © 2012 Society for Risk Analysis.

Tool to manage Road Safety Deficiencies and risk of highway crashes

Energy Technology Data Exchange (ETDEWEB)

Lopez Maldonado, G.; Baena Ruiz, L.; Garach Morcillo, L.; Oña Lopez, J. de

2016-07-01

In order to facilitate the management of the results obtained in the project “Analysis of the relationship between Road Safety Deficiencies, crashes and hazardous sections” financed by Public Works Agency of the Regional Government of Andalusia (AOPJA) and led by the research group TRYSE from University of Granada, a safety management tool has been developed. This application allows safety managers to consult some factors affecting crashes on two-lane rural highways.The main aim of that project was to analyze the influence of some road deficiencies on crashes and hazardous sections in the Complementary Road Network of Andalusia. These deficiencies were defined in a checklist and were identified by a road inspection. Decision Trees (DTs), that are a data mining technique that allows the extraction of Decision Rules (DRs), were used. DRs revealed the relationship between road deficiencies and crashes.The application allows two different analyses. A specific analysis of the Complementary Road Network of Andalusia, in which, particular safety problems can be identified, and the location of roads with those problems can be obtained. A more general analysis in which some characteristics related to road safety can be selected in order to know the combination of factors contributing to traffic crashes. Safety problems are based on data from Complementary Road Network of Andalusia but results can be extrapolated to other rural highways in Spain. (Author)

Control of safety and risk management software at the Savannah River Site

International Nuclear Information System (INIS)

Ades, M.J.; Toffer, H.; Crowe, R.D.

1992-01-01

As a part of its Reactor Operations Improvement Program at the Savannah River Site (SRS), Westinghouse Savannah River Company (WSRC), in cooperation with the Westinghouse Hanford Company, has developed and implemented software quality assurance (SQA) for computer codes essential to the safety and reliability of reactor operations. This effort includes the use of quality standards and attendant procedures developed for and applied to computer codes used in safety and risk management analyses. The certification process that was recently implemented is in compliance with site wide and departmental SQA requirements. Certification consists of preparing a specific verification and validation (V and V) plan, a configuration control plan, and user qualifications. Applicable documentation is reviewed to determine compliance with V and V and configuration control action items. The results of this review are documented and serve as a baseline for additional certification activities. Resource commitment and schedules are drawn up for each individual code to complete certification in accordance with SQA requirements

The NASA risk management program

International Nuclear Information System (INIS)

Buchbinder, B.; Philipson, L.L.

1989-01-01

This paper reports that the NASA Risk Management Program has been established to ensure the appropriate application of risk-based procedures in support of the elimination, reduction, or acceptance of significant safety risks of concern in NASA. The term appropriate is emphasized, in that the particular procedures applied to each given risk are to reflect its character and prioritized importance, the technological and economic feasibility of its treatment. A number of key documents have been produced in support of this implementation. Databases, risk analysis tools, and risk communication procedures requisite to the execution of the risk management functions also are being developed or documented. Several risk management applications have been made and a comprehensive application to a major new NASA program is underway. This paper summarizes the development and current status of the NASA Risk Management Program. Some principal actions that have been carried out in NASA in consonance with the program are noted particularly, and views are presented on the program's likely future directions

Risk monitor - a tool for operational safety assessment risk monitor - user's manual

International Nuclear Information System (INIS)

Hari Prasad, M.; Vinod, Gopika; Saraf, R.K.; Ghosh, A.K.

2006-06-01

Probabilistic Safety Assessment has become a key tool as on today to identify and understand Nuclear Power Plant vulnerabilities. As a result of the availability of these PSA studies, there is a desire to use them to enhance plant safety and to operate the nuclear stations in the most efficient manner. Risk Monitor is a PC based tool, which computes the real time safety level and assists plant personnel to manage day-to-day activities. Risk Monitor is a PC based user friendly software tool used for modification and re-analysis of a nuclear Power plant. Operation of Risk Monitor is based on PSA methods for assisting in day to day applications. Risk Monitoring programs can assess the risk profile and are used to optimize the operation of Nuclear Power Plants with respect to a minimum risk level over the operating time. This report presents the background activities of Risk Monitor, its application areas and the step by step procedure for the user.to interact with the software. This software can be used with the PSA model of any Nuclear Power Plant. (author)

Survey on the use of configuration risk and safety management tools at nuclear power plants. Final report

International Nuclear Information System (INIS)

Fleming, K.N.; Read, J.W.; Dagan, W.J.; Bidwell, D.A.

1998-09-01

In order to provide input to Electricite de France's (EDF) evaluation of the use of configuration safety and risk management tools in the French plants and to collect information to guide the EPRI efforts to provide useful tools for the EPRI member utilities and international partners, a joint effort to survey US and selected non-US nuclear power stations was conducted. This survey examined the use of various approaches, techniques, and software tools that are being used to evaluate the safety and risk aspects of plant configuration changes and configuration changes during plant outages as well as during power operation. The use of these tools has increased in recent years as a result of efforts to optimize plant maintenance programs, improve plant safety, and increase plant reliability and availability. This report provides the results of the survey of 37 organizations covering 54 nuclear plant sites and 97 reactor units

[A systemic risk analysis of hospital management processes by medical employees--an effective basis for improving patient safety].

Science.gov (United States)

Sobottka, Stephan B; Eberlein-Gonska, Maria; Schackert, Gabriele; Töpfer, Armin

2009-01-01

Due to the knowledge gap that exists between patients and health care staff the quality of medical treatment usually cannot be assessed securely by patients. For an optimization of safety in treatment-related processes of medical care, the medical staff needs to be actively involved in preventive and proactive quality management. Using voluntary, confidential and non-punitive systematic employee surveys, vulnerable topics and areas in patient care revealing preventable risks can be identified at an early stage. Preventive measures to continuously optimize treatment quality can be defined by creating a risk portfolio and a priority list of vulnerable topics. Whereas critical incident reporting systems are suitable for continuous risk assessment by detecting safety-relevant single events, employee surveys permit to conduct a systematic risk analysis of all treatment-related processes of patient care at any given point in time.

Operational risk management for a NPP

Energy Technology Data Exchange (ETDEWEB)

Scott, C.K., E-mail: KScott@AtlanticNuclear.ca [Atlantic Nuclear Services Inc., Fredericton, New Brunswick (Canada)

2013-07-01

Organizational failures are a hazard to the successful operation of a nuclear power plant. Risk reduction strategies have been developed around two themes: using an understanding of the nature and mechanism of human failures to eliminate them by modifying work processes; or, modifying human behaviour by creating a strong safety culture that overrides the tendency to fail. This paper examines the problem from the perspective of operational risk management. It includes the internal management of operations and the influence of the external environment on the organization. A model is proposed that encompasses all the operational risk factors in the organization's decision making process. To prevent failure the organization must have the capability to adapt and the capacity to evolve. The hazards that would lead to an organizational failure are developed from this evolutionary model. The operational risk management program would include these hazards as well as the conventional nuclear safety hazards. (author)

You Outsource the Service but Not the Risk: Supply Chain Risk Management for the Cyber Security of Safety Critical Systems

OpenAIRE

Johnson, Chris W.

2016-01-01

Companies increasingly form interdependent relationships between contractors and sub-contractors that extend\\ud across national borders and legal jurisdictions. In consequence, supply chain risk management (SCRM) is an\\ud increasing concern for the cyber security of safety-critical systems. The following pages argue that outsourcing\\ud undermines SCRM by eroding technical expertise, which companies need to select and audit their suppliers. They\\ud are still held accountable when the failure o...

Risk-informed regulation: handling uncertainty for a rational management of safety

International Nuclear Information System (INIS)

Zio, Enrico

2008-01-01

A risk-informed regulatory approach implies that risk insights be used as supplement of deterministic information for safety decision-making purposes. In this view, the use of risk assessment techniques is expected to lead to improved safety and a more rational allocation of the limited resources available. On the other hand, it is recognized that uncertainties affect both the deterministic safety analyses and the risk assessments. In order for the risk-informed decision making process to be effective, the adequate representation and treatment of such uncertainties is mandatory. In this paper, the risk-informed regulatory framework is considered under the focus of the uncertainty issue. Traditionally, probability theory has provided the language and mathematics for the representation and treatment of uncertainty. More recently, other mathematical structures have been introduced. In particular, the Dempster-Shafer theory of evidence is here illustrated as a generalized framework encompassing probability theory and possibility theory. The special case of probability theory is only addressed as term of comparison, given that it is a well known subject. On the other hand, the special case of possibility theory is amply illustrated. An example of the combination of probability and possibility for treating the uncertainty in the parameters of an event tree is illustrated

Business managers turn to risk assessment

International Nuclear Information System (INIS)

Allen, Frank

1993-01-01

Risk assessments have evolved to help technical managers in nuclear and other industries to design and operate plant with safety in mind. However, they are now developing into the area of business management. (author)

Safety leadership and systems thinking: application and evaluation of a Risk Management Framework in the mining industry.

Science.gov (United States)

Donovan, Sarah-Louise; Salmon, Paul M; Lenné, Michael G; Horberry, Tim

2017-10-01

Safety leadership is an important factor in supporting safety in high-risk industries. This article contends that applying systems-thinking methods to examine safety leadership can support improved learning from incidents. A case study analysis was undertaken of a large-scale mining landslide incident in which no injuries or fatalities were incurred. A multi-method approach was adopted, in which the Critical Decision Method, Rasmussen's Risk Management Framework and Accimap method were applied to examine the safety leadership decisions and actions which enabled the safe outcome. The approach enabled Rasmussen's predictions regarding safety and performance to be examined in the safety leadership context, with findings demonstrating the distribution of safety leadership across leader and system levels, and the presence of vertical integration as key to supporting the successful safety outcome. In doing so, the findings also demonstrate the usefulness of applying systems-thinking methods to examine and learn from incidents in terms of what 'went right'. The implications, including future research directions, are discussed. Practitioner Summary: This paper presents a case study analysis, in which systems-thinking methods are applied to the examination of safety leadership decisions and actions during a large-scale mining landslide incident. The findings establish safety leadership as a systems phenomenon, and furthermore, demonstrate the usefulness of applying systems-thinking methods to learn from incidents in terms of what 'went right'. Implications, including future research directions, are discussed.

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden))

2004-11-15

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Organizational and methodological aspects for contemporary health and safety management system

Directory of Open Access Journals (Sweden)

Sugak Evgeny

2017-01-01

Full Text Available Industrial injuries and work-related disorders considerable lowering we are facing in developed countries may be due to switching to a new health and safety management system entitled “Occupational Safety and Health Management System”. The Russian Federation has prepared certain regulatory documents prescribing some suggestions regarding implementing the contemporary system for industrial injuries prevention based upon the methods for professional risks management. However, despite the efforts made by the Russian Government, reformation of the health and safety management system at various companies is being performed rather slowly that may be as well owing to poor competence of managers and specialists regarding contemporary labor safety model content, methodical and organizational novations in the sphere of occupational safety and health management.. The article refers to a number of principal issues distinguishing the new health and safety management system from conventional approach.

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT WITH THE USE OF BRAINSTORMING METHOD

Directory of Open Access Journals (Sweden)

Artur Woźny

2018-01-01

Full Text Available Health and safety at work issue concerns every employer. Adjusting the work environment to legal requirements and standards is the key to creating health and safety culture. In every functioning OSH system there are various types of problems that employers face. The subject of the article is how to solve the problem of safety in production systems using the brainstorming method. The basic ele-ment of creating health and safety culture is an appropriate approach to occupational risk manage-ment. Risk assessment in the workplace should take place in teams as it is possible to reliably identi-fy hazards and accurately assess them.

Safety risk assessment using analytic hierarchy process (AHP) during planning and budgeting of construction projects.

Science.gov (United States)

Aminbakhsh, Saman; Gunduz, Murat; Sonmez, Rifat

2013-09-01

The inherent and unique risks on construction projects quite often present key challenges to contractors. Health and safety risks are among the most significant risks in construction projects since the construction industry is characterized by a relatively high injury and death rate compared to other industries. In construction project management, safety risk assessment is an important step toward identifying potential hazards and evaluating the risks associated with the hazards. Adequate prioritization of safety risks during risk assessment is crucial for planning, budgeting, and management of safety related risks. In this paper, a safety risk assessment framework is presented based on the theory of cost of safety (COS) model and the analytic hierarchy process (AHP). The main contribution of the proposed framework is that it presents a robust method for prioritization of safety risks in construction projects to create a rational budget and to set realistic goals without compromising safety. The framework provides a decision tool for the decision makers to determine the adequate accident/injury prevention investments while considering the funding limits. The proposed safety risk framework is illustrated using a real-life construction project and the advantages and limitations of the framework are discussed. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Fire Safety. Managing School Facilities, Guide 6.

Science.gov (United States)

Department for Education and Employment, London (England). Architects and Building Branch.

This booklet discusses how United Kingdom schools can manage fire safety and minimize the risk of fire. The guide examines what legislation school buildings must comply with and covers the major risks. It also describes training and evacuation procedures and provides guidance on fire precautions, alarm systems, fire fighting equipment, and escape…

Management of radiation risk

International Nuclear Information System (INIS)

Hubert, P.

1996-01-01

The need to control the risk from ionizing radiation can be tracked back to the eve of the twentieth century. However, as knowledge improved and practices expanded, the approaches to this control have evolved. No longer is the mere respect of some forms of exposure limits or safety related standards sufficient. Rather, it is widely admitted that there is a need for managing radiation risk, both by balancing the advantages and disadvantages of enhancing protection and by setting up a proper organization that allows handling of the risk. This paper describes the multiple aspects of radiation risk management and points out the main related issues. It critically analyzes ALARA and ICRP recommendations. 74 refs, 8 figs, 5 tabs

Light Water Reactor Sustainability Program Technical Basis Guide Describing How to Perform Safety Margin Configuration Risk Management

Energy Technology Data Exchange (ETDEWEB)

Curtis Smith; James Knudsen; Bentley Harwood

2013-08-01

The INL has carried out a demonstration of the RISMC approach for the purpose of configuration risk management. We have shown how improved accuracy and realism can be achieved by simulating changes in risk – as a function of different configurations – in order to determine safety margins as the plant is modified. We described the various technical issues that play a role in these configuration-based calculations with the intent that future applications can take advantage of the analysis benefits while avoiding some of the technical pitfalls that are found for these types of calculations. Specific recommendations have been provided on a variety of topics aimed at improving the safety margin analysis and strengthening the technical basis behind the analysis process.

Improving operational safety management through probabilistic safety assessment on personal computers

International Nuclear Information System (INIS)

1988-10-01

The Technical Committee Meeting considered the current effort in the implementation and use of PSA information for day-to-day operational safety management on Personal Computers. Due to the very recent development of the necessary hardware and software for Personal Computers, the application of PSA information for day-to-day operational safety management on PCs is essentially still in a pioneering stage. There is at present only one such system for end users existing, the PRISIM (Plant Risk Status Information Management) program for which a limited practical application experience is available. Others are still in the development stage. The main aim of the Technical Committee Meeting was to discuss the present status of PSA based systems for operational safety management support on small computers, to consider practical aspects when implementing these systems into a nuclear installation and to address problems related to the further work in the area. A separate abstract was prepared for the summary of the Technical Committee Meeting and for the 8 papers presented by the participants. Refs, figs and tabs

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla

2004-11-01

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Safety from physical viewpoint: ''two-risk model in multiple risk problem''

International Nuclear Information System (INIS)

Kuz'Min, I.I.; Akimov, V.A.

1998-01-01

Full text of publication follows: the problem of safety provision for people and environment within the framework of a certain socio-economic system (SES) as a problem of managing a great number of interacting risks characterizing numerous hazards (natural, manmade, social, economic once, etc.) inherent in the certain SES has been discussed. From the physical point of view, it can be considered a problem of interaction of many bodies which has no accurate mathematical solution even if the laws of interaction of this bodies are known. In physics, to solve this problem, an approach based on the reduction of the above-mentioned problem of the problem of two-body interaction which can be solved accurately in mathematics has been used. The report presents a similar approach to the problem of risk management in the SES. This approach includes the subdivision of numerous hazards inherent within the framework of the SES into two classes of hazards, so that each of the classes could be considered an integrated whole one, each of them being characterized by the appropriate risk. Consequently, problem of 'multiple-risk' management (i.e. the problem of many bodies, as represented in physics) can be reduced to the 'two-risk' management problem (that is, to the problem two-bodies). Within the framework of the two-risk model the optimization of costs to reduce the two kinds of risk, that is, the risk inherent in the SES as a whole, as well as the risk potentially provoked by lots of activities to be introduced in the SES economy has been described. The model has made it possible to formulate and prove the theorem of equilibrium in risk management. Using the theorem, a relatively simple and practically applicable procedure of optimizing the threshold costs to reduce diverse kinds of risk has been elaborated. The procedure provides to assess the minimum value of the cost that can be achieved regarding the socio-economic factors typical of the SES under discussion. The aimed

Risk management in nuclear power social aspects

International Nuclear Information System (INIS)

Sappa, N.N.

1996-01-01

Problems connected with safety evaluation and risk management during operation of nuclear power installations are considered. Social aspects of risk assessment of enterprises with increased danger are discussed

A holistic view on Safety Management

DEFF Research Database (Denmark)

Jørgensen, Kirsten

to prevent accidents is to identify the risks in all kinds of situations and take precautions by establishing safety barriers either technically or by improving the processes involved in managing these barriers, as well as bringing about behavioral improvements through good leadership. A project initiated...

ENHANCEMENT OF ROAD SAFETY THROUGH MORE EFFECTIVE ROAD AND TRAFFIC MANAGEMENT

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available To make the policy aimed at mitigating the risk of road incidents more effective, Poland should see the introduction of the more efficient road and traffic management. In November 2008 the European Parliament and the European Council published the Directive on "infrastructure safety management" which provides guidance on the procedures for carrying impact assessments of traffic safety, traffic safety audits, safety management on the road network and monitoring traffic safety in Member States. In this article, the authors have proposed a systemic approach to road and traffic management, involving the implementation of consistent procedures that should include regular revisions of roads, eliminating hazardous sites, speed management, as well as the approval and implementation of traffic organization designs.

Sanitation health risk and safety planning in urban residential ...

African Journals Online (AJOL)

The aim of this review paper was to determine the best sanitation health risk and safety planning approach for sustainable management of urban environment. This was achieved by reviewing the concept of sanitation safety planning as a tool. The review adopted exploratory research approach and used secondary data ...

Safety- and Risk Analysis Activities in Chemical Industry in Europe

International Nuclear Information System (INIS)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt

2001-01-01

The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis. In this respect there is a

Safety- and Risk Analysis Activities in Chemical Industry in Europe

Energy Technology Data Exchange (ETDEWEB)

Kozine, Igor; Duijm, Nijs Jan; Lauridsen Kurt [Risoe National Laboratory, Roskilde (Denmark). Systems Analysis Department

2001-07-01

The current paper gives an overview of the legislation and the methods used in safety and risk management in the chemical industry within Europe and in particular within the European Union. The paper is based on a report that has been written for the SOS-1 project under the Nordic nuclear safety research (NKS). Safety- and risk-related matters in the process industry, in particular, in chemical, within the EU are subject to consideration at three levels: (1) EU legislation, (2) European/intemational standardisation, and (3) socio-economic analysis. EC Directives define the 'essential requirements', e.g., protection of health and safety, that must be fulfilled when goods are placed on the market or some industry is put into operation. The European standards bodies (CEN, CENELEC and ETSI) have the task of establishing the corresponding technical specifications, meeting the essential requirements of the Directives, compliance with which will provide a presumption of conformity with the essential requirements. Such specifications are referred to as 'harmonised standards'. Compliance with harmonised standards remains voluntary, and manufacturers are free to choose any other technical solution that provides compliance with the essential requirements. This view is stated in the 'New Approach' to technical harmonisation and standardisation (details can be found on the web page: http://europe.eu.int/comm/enterprise/newapproach/standardization/index .html). Standardisation as well as the regulation of technical risks is increasingly being undertaken at European or international level. The European legislator limits its role to the affirmation of overall objectives, and leaves it to the economic players to draw up the technical procedures and standards to specify in detail the ways and means of attaining them. Many countries have introduced requirements that new legislation and/or administrative regulations be subject to socio-economic analysis

The effectiveness of different instruction methods for risk and safety management in relation to medical profession and seniority

NARCIS (Netherlands)

Navot Pikkel, Dvora

2017-01-01

The study, which was guided by Prof.dr J.b. Rijsman as promotor and by Dr. Y.T. Tal as co- promotor, was a comparative interventional study that was designed to evaluate the effectiveness of different teaching & educational strategies of risk management and patient's safety in medicine. Eventually,

Risk management at Lawrence Livermore National Laboratory

International Nuclear Information System (INIS)

Cummings, G.E.; Strait, R.S.

1993-10-01

Managing risks at a large national laboratory presents a unique set of challenges. These challenges include the management of a broad diversity of activities, the need to balance research flexibility against management control, and a plethora of requirements flowing from regulatory and oversight bodies. This paper will present the experiences of Lawrence Livermore National Laboratory (LLNL) in risk management and in dealing with these challenges. While general risk management has been practiced successfully by all levels of Laboratory management, this paper will focus on the Laboratory's use of probabilistic safety assessment and prioritization techniques and the integration of these techniques into Laboratory operations

Dams, Hydrology and Risk in Future River Management

Science.gov (United States)

Wegner, D. L.

2017-12-01

Across America there are over 80,000 large to medium dams and globally the number is in excess of 800,000. Currently there are over 1,400 dams and diversion structures being planned or under construction globally. In addition to these documented dams there are thousands of small dams populating watersheds. Governments, agencies, native tribes, private owners and regulators all have a common interest in safe dams. Often dam safety is characterized as reducing structural risk while providing for maximum operational flexibility. In the 1970's there were a number of large and small dam failures in the United States. These failures prompted the federal government to issue voluntary dam safety guidelines. These guidelines were based on historic information incorporated into a risk assessment process to analyze, evaluate and manage risk with the goal to improve the quality of and support of dam management and safety decisions. We conclude that historic and new risks need to be integrated into dam management to insure adequate safety and operational flexibility. A recent assessment of the future role of dams in the United States premises that future costs such as maintenance or removal beyond the economic design life have not been factored into the long-term operations or relicensing of dams. The converging risks associated with aging water storage infrastructure, multiple dams within watersheds and uncertainty in demands policy revisions and an updated strategic approach to dam safety. Decisions regarding the future of dams in the United States may, in turn, influence regional water planning and management. Leaders in Congress and in the states need to implement a comprehensive national water assessment and a formal analysis of the role dams play in our water future. A research and national policy agenda is proposed to assess future impacts and the design, operation, and management of watersheds and dams.

International trade standards for commodities and products derived from animals: the need for a system that integrates food safety and animal disease risk management.

Science.gov (United States)

Thomson, G R; Penrith, M-L; Atkinson, M W; Thalwitzer, S; Mancuso, A; Atkinson, S J; Osofsky, S A

2013-12-01

A case is made for greater emphasis to be placed on value chain management as an alternative to geographically based disease risk mitigation for trade in commodities and products derived from animals. The geographic approach is dependent upon achievement of freedom in countries or zones from infectious agents that cause so-called transboundary animal diseases, while value chain-based risk management depends upon mitigation of animal disease hazards potentially associated with specific commodities or products irrespective of the locality of production. This commodity-specific approach is founded on the same principles upon which international food safety standards are based, viz. hazard analysis critical control points (HACCP). Broader acceptance of a value chain approach enables animal disease risk management to be combined with food safety management by the integration of commodity-based trade and HACCP methodologies and thereby facilitates 'farm to fork' quality assurance. The latter is increasingly recognized as indispensable to food safety assurance and is therefore a pre-condition to safe trade. The biological principles upon which HACCP and commodity-based trade are based are essentially identical, potentially simplifying sanitary control in contrast to current separate international sanitary standards for food safety and animal disease risks that are difficult to reconcile. A value chain approach would not only enable more effective integration of food safety and animal disease risk management of foodstuffs derived from animals but would also ameliorate adverse environmental and associated socio-economic consequences of current sanitary standards based on the geographic distribution of animal infections. This is especially the case where vast veterinary cordon fencing systems are relied upon to separate livestock and wildlife as is the case in much of southern Africa. A value chain approach would thus be particularly beneficial to under-developed regions of

Investigation of status of safety management in radiation handle works

International Nuclear Information System (INIS)

Amauchi, Hiroshi; Nishimura, Kenji; Izumi, Kokichi

2007-01-01

This report describes the investigation in the title concerning the system for safety management and for accident prevention, which was done by a questionnaire in a period of 1.5 months in 2005. The questionnaire including 55 questions for safety management system, 33 for instruments and safety utilization of radiation and 57 for present status of safety management in high-risk radiation works, was performed in 780 hospitals, of which 313 answered. The first 55 questions concerned with the facility, patient identification, information exchange, management of private information, safety management activities, measures to prevent accident, manual preparation, personnel education and safety awareness; the second, with management of instruments, package insert, system for reporting the safety information, management of implants, re-imaging and radiation protection; and the third, with the systems for patients' emergency, in departments of CT/MR, of IVR, of nuclear diagnosis and of radiation therapy. Based on the results obtained, many problems, tasks and advices are presented to various items and further continuation of efforts to improve the present status is mentioned to be necessary. Details are given in the homepage of the Japanese Society of Radiological Technology. (T.I.)

Development of a Preliminary Model for Evaluating Occupational Health and Safety Risk Management Maturity in Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Bilal Kaassis

2018-02-01

Full Text Available Management of occupational health and safety (OHS risks is a crucial component of any business. Numerous investigations have shown that work-related injuries and deaths occur disproportionately in small-to-medium-sized enterprises (SMEs and that this is clearly due to deficient management of OHS risks. The main goal of this work is to develop a base of indicators suitable for evaluating OHS risk management maturity in industrial SMEs. A preliminary model is then proposed for this evaluation, based on a small number of relevant indicators selected from a careful bibliographic review. The work begins with a critical review of the literature and analysis of known concepts, methods, tools and models of measurement of risk analysis maturity in order to extract relevant indicators. The most suitable indicators are then grouped to form the basis of a preliminary model for evaluating OHS risk management maturity in the SME setting. Our findings will help managers of SMEs make sound decisions in their quest to improve the OHS performance of their businesses.

Plant risk status information management system

International Nuclear Information System (INIS)

Campbell, D.J.; Ellison, B.C.; Glynn, J.C.; Flanagan, G.F.

1985-01-01

The Plant Risk Status Information Management System (PRISIMS) is a PC program that presents information about a nuclear power plant's design, its operation, its technical specifications, and the results of the plant's probabilistic risk assessment (PRA) in a logically and easily accessible format. PRISIMS provides its user with unique information for integrating safety concerns into day-to-day operational decisions and/or long-range management planning

Risk in Management Systems according to ISO standard

Directory of Open Access Journals (Sweden)

P. Królas

2010-07-01

Full Text Available The purpose of this article was to present selected management standards in context of risk management. It presents main ISOmanagement standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 27001, BS 25999, ISO 31000 that apply to polish enterprises. In thefirst part of this article there are analyzed management standards regarding quality, environment, occupational health and safety,information security, as well as business continuity management and risk management. The second part of the article discusses the processof dealing with risk based on chosen management standard.

Management of nanomaterials safety in research environment

Directory of Open Access Journals (Sweden)

Riediker Michael

2010-12-01

Full Text Available Abstract Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health. The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3 - highest hazard to Nano1 - lowest hazard. Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal. The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and

Management of nanomaterials safety in research environment.

Science.gov (United States)

Groso, Amela; Petri-Fink, Alke; Magrez, Arnaud; Riediker, Michael; Meyer, Thierry

2010-12-10

Despite numerous discussions, workshops, reviews and reports about responsible development of nanotechnology, information describing health and environmental risk of engineered nanoparticles or nanomaterials is severely lacking and thus insufficient for completing rigorous risk assessment on their use. However, since preliminary scientific evaluations indicate that there are reasonable suspicions that activities involving nanomaterials might have damaging effects on human health; the precautionary principle must be applied. Public and private institutions as well as industries have the duty to adopt preventive and protective measures proportionate to the risk intensity and the desired level of protection. In this work, we present a practical, 'user-friendly' procedure for a university-wide safety and health management of nanomaterials, developed as a multi-stakeholder effort (government, accident insurance, researchers and experts for occupational safety and health). The process starts using a schematic decision tree that allows classifying the nano laboratory into three hazard classes similar to a control banding approach (from Nano 3--highest hazard to Nano1--lowest hazard). Classifying laboratories into risk classes would require considering actual or potential exposure to the nanomaterial as well as statistical data on health effects of exposure. Due to the fact that these data (as well as exposure limits for each individual material) are not available, risk classes could not be determined. For each hazard level we then provide a list of required risk mitigation measures (technical, organizational and personal). The target 'users' of this safety and health methodology are researchers and safety officers. They can rapidly access the precautionary hazard class of their activities and the corresponding adequate safety and health measures. We succeed in convincing scientist dealing with nano-activities that adequate safety measures and management are promoting

The Safety Case and the Risk-Informed Performance-Based Approach for Management of US Commercial Low Level Radioactive Waste (LLRW)

International Nuclear Information System (INIS)

Abu-Eid, Rateb; Esh, David; Grossman, Chrisopher

2016-01-01

Summary/Conclusion Safety Case & 10 CFR Part 61: • Safety Case is an integrated approach to risk assessment and risk management. • NRC staff explicitly added “the safety case” concept in the ongoing amendment of 10 CFR Part 61, at the direction of Commission. • Plain language description the safety arguments and evidence to demonstrate the overall safety of a land disposal facility were developed. • It describes all safety relevant aspects of the disposal site, the design of the facility, and the managerial control measures and regulatory controls to inform the decision whether to grant a license. • It includes the same type of information that the original 10 CFR Part 61 required to be submitted as part of a license application (i.e., 10 CFR 61.10 – 10 CFR 61.16). • The safety case will be updated over time as a new information is gained during the various phases of the facility’s development, inspection, and operation. • 10 CFR Part 61 SC is quite consistent with IAEA SSG-23 with more detailed technical analysis.

ePORT, NASA's Computer Database Program for System Safety Risk Management Oversight (Electronic Project Online Risk Tool)

Science.gov (United States)

Johnson, Paul W.

2008-01-01

ePORT (electronic Project Online Risk Tool) provides a systematic approach to using an electronic database program to manage a program/project risk management processes. This presentation will briefly cover the standard risk management procedures, then thoroughly cover NASA's Risk Management tool called ePORT. This electronic Project Online Risk Tool (ePORT) is a web-based risk management program that provides a common framework to capture and manage risks, independent of a programs/projects size and budget. It is used to thoroughly cover the risk management paradigm providing standardized evaluation criterion for common management reporting, ePORT improves Product Line, Center and Corporate Management insight, simplifies program/project manager reporting, and maintains an archive of data for historical reference.

Criticality Risk Management: Why Analysis of Operating Practices Matters

International Nuclear Information System (INIS)

Menuet, L.; Tasset, D.; Hebraud, C.

2016-01-01

The criticality risk is an unwanted neutron chain reaction that could lead, if not under control, to a criticality accident resulting in a high release of energy accompanied by an intense emission of neutron and gamma radiation. Thus, the management of criticality risk in Fuel Cycle Facilities relies mainly on a set of prescriptions and requirements established by the licencees for achieving safety objectives. This paper intends to show that, beyond prescriptions and requirements, a socio-technical approach is essential to define a relevant set of criticality safety rules favouring efficient and safe human activities. Indeed, a thorough knowledge of staff operating practices, beyond contributing significantly to the definition of appropriate technical and organizational provisions, enhances safety management combining “rule-based safety” and “managed safety”. Rule-based safety (top down definition of the rules) can be achieved by anticipating undesirable situations and defining provisions to avoid and manage them in daily practices. On the other hand, managed safety (integration of local characteristics) develops the sociotechnical system capacity to anticipate, recognise and formulate appropriate responses to unexpected scenarios that were not foreseen by the organization, or to rules that are not applicable to the operational realities. Thus, an effective safety management relies on human expertise, on the skills of individuals, on the quality of initiatives, and on the way teams and organizations perform the operations on a daily basis, interact and coordinate to integrate and regulate both ruled-based safety and managed safety.

Safety management of a complex R and D ground operating system

Science.gov (United States)

Connors, J. F.; Maurer, R. A.

1975-01-01

A perspective on safety program management was developed for a complex R&D operating system, such as the NASA-Lewis Research Center. Using a systems approach, hazardous operations are subjected to third-party reviews by designated-area safety committees and are maintained under safety permit controls. To insure personnel alertness, emergency containment forces and employees are trained in dry-run emergency simulation exercises. The keys to real safety effectiveness are top management support and visibility of residual risks.

Risk management activities at the DOE Class A reactor facilities

International Nuclear Information System (INIS)

Sharp, D.A.; Hill, D.J.; Linn, M.A.; Atkinson, S.A.; Hu, J.P.

1993-01-01

The probabilistic risk assessment (PRA) and risk management group of the Association for Excellence in Reactor Operation (AERO) develops risk management initiatives and standards to improve operation and increase safety of the DOE Class A reactor facilities. Principal risk management applications that have been implemented at each facility are reviewed. The status of a program to develop guidelines for risk management programs at reactor facilities is presented

Swedish REGULATORY APPROACH TO SAFETY Assessment AND SEVERE ACCIDENT MANAGEMENT

International Nuclear Information System (INIS)

Frid, W.; Sandervaag, O.

1997-01-01

The Swedish regulatory approach to safety assessment and severe accident management is briefly described. The safety assessment program, which focuses on prevention of incidents and accidents, has three main components: periodic safety reviews, probabilistic safety analysis, and analysis of postulated disturbances and accident progression sequences. Management and man-technology-organisation issues, as well as inspections, play a key role in safety assessment. Basis for severe accident management were established by the Government decisions in 1981 and 1986. By the end of 1988, the severe accident mitigation systems and emergency operating procedures were implemented at all Swedish reactors. The severe accident research has continued after 1988 for further verification of the protection provided by the systems and reduction of remaining uncertainties in risk dominant phenomena

Risk Communication: A Key for Fostering a More Resilient Safety Culture

International Nuclear Information System (INIS)

Nishizawa, M.

2016-01-01

It is widely agreed that the accident of the Fukushima Daiichi nuclear power plant was not only triggered by natural events combined with technical failures, but was a human induced disaster. From the bitter lessons, we have learned that human and organizational factors associated with emergency planning, response and decision-making for nuclear safety need to be more carefully reviewed and enhanced. Elements of social sciences, especially, risk management and risk communication here play a key role. Risk communication is an established concept within risk analysis frameworks. It is a vital tool to convey the meaning of scientific assessment and risk management, share safety related information, and exchange views and values amongst varying stakeholder groups. Risk communication aims at building trust through this process and human interactions. However, it would not be an overstatement that the essence of risk communication is not fully understood. As a result, it is either partially integrated into risk management practice or remains unconducive. The marginalisation of risk communication is observed in a variety of risk communication practices, or more evidently, in perception gaps between lays and experts about risks.

Mastery of risks and operational safety, risks and opportunities

International Nuclear Information System (INIS)

2004-01-01

Creating socially useful richness is certainly the prime reason for companies to exist. Reaching this always moving target leads to seize opportunities and to take risks at the same time. For companies, risks and opportunities are two indissociable factors. Any decision making has to deal with an uncertain environment with random events of technological, economical, biological, human, environmental or natural origin. Because of the fear of uncertainty, risk acts as a brake to initiatives. In front of this problem, companies have to adopt a prevention policy based on a global and systemic approach, by identifying, evaluating, quantifying, sorting, mastering and managing unwanted events and by communicating about the way to treat them. In front of uncertainties, the operational safety, thanks to its methods and tools, supplies an incomparable contribution in the form of an help to any decision made with uncertainties. Operational safety contributes to the evaluation of costs and makes more realistic the economical estimations by taking into account the foreseeable and unforeseeable risks. The mastery of unwanted events, of their stakes and uncertainties, allows companies to carry out their projects in non-determined contexts and in a competitive environment. This colloquium concerns all socio-economical actors: industrialists, investors, decision makers, university and laboratory staffs, etc., who need a better evaluation of risks for a better mastery of their decisions in all sectors of activity. Seventeen papers of this conference, dealing with safety analysis and risk assessment at nuclear facilities and at other energy-related facilities, have been selected for Inis. (J.S.)

Life Management and Safety of Nuclear Facilities

Energy Technology Data Exchange (ETDEWEB)

Fabbri, S.; Diluch, A.; Vega, G., E-mail: fabbri@cnea.gov.ar [Comisión Nacional de Energía Atómica, Buenos Aires (Argentina)

2014-10-15

The nuclear programme in Argentina includes: nuclear power and related supplies, medical and industrial applications, waste management, research and development and human training. Nuclear facilities require life management programs that allow a safe operation. Safety is the first priority for designers and operators. This can be attained with defence in depth: regular inspections and maintenance procedures to minimize failure risks. CNEA objectives in this area are to possess the necessary capability to give safe and fast technical support. Within this scheme, one of the main activities undertaken by CNEA is to provide technological assistance to the nuclear plants and research reactors. As a consequence of an increasing concern about safety and ageing a Life Management Department for safe operation was created to take care of these subjects. The goal is to elaborate a Safety Evaluation Process for the critical components of nuclear plants and other facilities. The overall objectives of a safety process are to ensure a continuous safe, reliable and effective operation of nuclear facilities and it means the implementation of the defence in deep concept to enhance safety for the protection of the public, the workers and the environment. (author)

Risk-based safety indicators

International Nuclear Information System (INIS)

Szikszai, T.

1997-01-01

The presentation discusses the following issues: The objectives of the risk-based indicator programme. The characteristics of the risk-based indicators. The objectives of risk-based safety indicators - in monitoring safety; in PSA applications. What indicators? How to produce the risk based indicators? PSA requirements

New approach to managing nuclear criticality risk at Nuclear Fuel Services, Inc

International Nuclear Information System (INIS)

Green, R.; Droke, R.; Paine, D.

1992-01-01

The negative aspects of having a nuclear criticality accident at a fuel fabrication facility have substantially increased in recent years. Although ensuring that the facility is designed and operating in a critically safe manner is a high management priority, practices of managing the risk of a criticality accident have not significantly changed. The method of evaluating risk based on quantitative analysis can enable management to adapt to the increased consequences of a nuclear criticality accident. Additional controls may be placed on high-risk areas within a facility to ensure safe operation of the plant. Areas where controls are in place that impede the productivity of the facility and have negligible impact on criticality safety may be removed or replaced. Management can also streamline the safety analysis efforts applied to facility upgrades by demonstrating that proposed design changes do not compromise criticality safety. Future expansion of quantitative analysis techniques will also allow risk-based management decisions on industrial, radiological, and environmental safety

Management of safety, safety culture and self assessment

International Nuclear Information System (INIS)

Carnino, A.

2000-01-01

Safety management is the term used for the measures required to ensure that an acceptable level of safety is maintained throughout the life of an installation, including decommissioning. The safety culture concept and its implementation are described in part one of the paper. The principles of safety are now quite well known and are implemented worldwide. It leads to a situation where harmonization is being achieved as indicated by the entry into force of the Convention on Nuclear Safety. To go beyond the present nuclear safety levels, management of safety and safety culture will be the means for achieving progress. Recent events which took place in major nuclear power countries have shown the importance of the management and the consequences on safety. At the same time, electricity deregulation is coming and will impact on safety through reductions in staffing and in operation and maintenance cost at nuclear installations. Management of safety as well as its control and monitoring by the safety authorities become a key to the future of nuclear energy.(author)

Ensuring the quality of occupational safety risk assessment.

Science.gov (United States)

Pinto, Abel; Ribeiro, Rita A; Nunes, Isabel L

2013-03-01

In work environments, the main aim of occupational safety risk assessment (OSRA) is to improve the safety level of an installation or site by either preventing accidents and injuries or minimizing their consequences. To this end, it is of paramount importance to identify all sources of hazards and assess their potential to cause problems in the respective context. If the OSRA process is inadequate and/or not applied effectively, it results in an ineffective safety prevention program and inefficient use of resources. An appropriate OSRA is an essential component of the occupational safety risk management process in industries. In this article, we performed a survey to elicit the relative importance for identified OSRA tasks to enable an in-depth evaluation of the quality of risk assessments related to occupational safety aspects on industrial sites. The survey involved defining a questionnaire with the most important elements (tasks) for OSRA quality assessment, which was then presented to safety experts in the mining, electrical power production, transportation, and petrochemical industries. With this work, we expect to contribute to the main question of OSRA in industries: "What constitutes a good occupational safety risk assessment?" The results obtained from the questionnaire showed that experts agree with the proposed OSRA process decomposition in steps and tasks (taxonomy) and also with the importance of assigning weights to obtain knowledge about OSRA task relevance. The knowledge gained will enable us, in the near future, to build a framework to evaluate OSRA quality for industrial sites. © 2012 Society for Risk Analysis.

Risk management for buildings -- Has the time come?

Energy Technology Data Exchange (ETDEWEB)

Berry, D.L.; Hunter, R.L.

1997-08-01

There are both incentives and challenges for applying formal risk management processes to buildings and other structures, including bridges, highways, dams, stadiums, shopping centers, and private dwellings. Based on an assessment of several issues, the authors conclude that for certain types of buildings and structures the time has come for the use of a formal risk-management approach, including probabilistic risk assessment methods, to help identify dominant risks to public health, safety, and security and to help manage these risks in a cost-effective manner.

Development of Risk Assessment Matrix for NASA Engineering and Safety Center

Science.gov (United States)

Malone, Roy W., Jr.; Moses, Kelly

2004-01-01

This paper describes a study, which had as its principal goal the development of a sufficiently detailed 5 x 5 Risk Matrix Scorecard. The purpose of this scorecard is to outline the criteria by which technical issues can be qualitatively and initially prioritized. The tool using this score card has been proposed to be one of the information resources the NASA Engineering and Safety Center (NESC) takes into consideration when making decisions with respect to incoming information on safety concerns across the entire NASA agency. The contents of this paper discuss in detail each element of the risk matrix scorecard, definitions for those elements and the rationale behind the development of those definitions. This scorecard development was performed in parallel with the tailoring of the existing Futron Corporation Integrated Risk Management Application (IRMA) software tool. IRMA was tailored to fit NESC needs for evaluating incoming safety concerns and was renamed NESC Assessment Risk Management Application (NAFMA) which is still in developmental phase.

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

The use of GIS tools for road infrastructure safety management

Science.gov (United States)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

RISK-INFORMED SAFETY MARGIN CHARACTERIZATION

International Nuclear Information System (INIS)

Dinh, Nam; Szilard, Ronaldo

2009-01-01

The concept of safety margins has served as a fundamental principle in the design and operation of commercial nuclear power plants (NPPs). Defined as the minimum distance between a system's 'loading' and its 'capacity', plant design and operation is predicated on ensuring an adequate safety margin for safety-significant parameters (e.g., fuel cladding temperature, containment pressure, etc.) is provided over the spectrum of anticipated plant operating, transient and accident conditions. To meet the anticipated challenges associated with extending the operational lifetimes of the current fleet of operating NPPs, the United States Department of Energy (USDOE), the Idaho National Laboratory (INL) and the Electric Power Research Institute (EPRI) have developed a collaboration to conduct coordinated research to identify and address the technological challenges and opportunities that likely would affect the safe and economic operation of the existing NPP fleet over the postulated long-term time horizons. In this paper we describe a framework for developing and implementing a Risk-Informed Safety Margin Characterization (RISMC) approach to evaluate and manage changes in plant safety margins over long time horizons

Understanding safety and production risks in rail engineering planning and protection.

Science.gov (United States)

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

At your own risk. An inquiry about risk management in the ESI

International Nuclear Information System (INIS)

Anon.

1996-01-01

The UNIPEDE survey on Risk Management within the Electricity Supply Industry has provided a picture of the risks facing the Industry at present and an insight into the management of tomorrow's risks. The survey, in which 81 companies (85 respondents) from 31 countries took part shows that: nearly all types of risk identified in the questionnaire are perceived to be growing : the Risk Management role has become more centralized over the past three years: change will slow in the coming three ; the amount of top level attention given to Risk Management is increasing. However only 37 % of respondent companies have Risk Management as a regular top level management item ; environment-related risks and the safety of both employees and the public are perceived as the most critical risks facing the Industry. Over 80 % of surveyed companies consider that both are of increasing concern ; almost 90 % of respondents agreed that risk management processes should be implemented for both pure and speculative risks. Those who disagreed maintained that Risk Management should be 'realistic not theoretical' ; respondents from the US gave markedly different answers to those from the rest of the world. Risk Management in the US receives top level attention, with numerous separated risk management departments handling risk strategy

Probabilistic risk assessment methodology for risk management and regulatory applications

International Nuclear Information System (INIS)

See Meng Wong; Kelly, D.L.; Riley, J.E.

1997-01-01

This paper discusses the development and potential applications of PRA methodology for risk management and regulatory applications in the U.S. nuclear industry. The new PRA methodology centers on the development of This paper discusses the time-dependent configuration risk profile for evaluating the effectiveness of operational risk management programs at U.S. nuclear power plants. Configuration-risk profiles have been used as risk-information tools for (1) a better understanding of the impact of daily operational activities on plant safety, and (2) proactive planning of operational activities to manage risk. Trial applications of the methodology were undertaken to demonstrate that configuration-risk profiles can be developed routinely, and can be useful for various industry and regulatory applications. Lessons learned include a better understanding of the issues and characteristics of PRA models available to industry, and identifying the attributes and pitfalls in the developement of risk profiles

Safety and resiliency in action: Integrating risk management into local development

Directory of Open Access Journals (Sweden)

Ebay Jorge S.

2013-01-01

Full Text Available This paper examines the efforts of the local government unit (LGU of San Jose de Buenavista, in the Province of Antique in central Philippines to manage risks associated with multiple hazards to protect the people, their livelihoods and local development gains. More specifically, it analyzes the process of pursuing risk management objectives vis-a-vis national and international disaster risk reduction and management (DRRM norms, without loosing sight of local contextual realities that directly influence people’s vulnerabilities and capacities. Risk management initiatives in the LGU revolve around four key areas namely disaster prevention and mitigation, disaster preparedness, emergency response, and recovery and rehabilitation. Binding these initiatives are actions that integrate governance mechanisms with scientific data and sectoral and community participation to develop a comprehensive plan of action and standard operating procedures that will serve as guideposts in the process of building a safer community. The experience of San Jose de Buenavista also suggests that cost saving strategies an be replicated by communities and organizations that have financial limitations to pursue DRRM objectives. This paper contends that risk management is a fundamental development strategy to pursue local development goals and to sustain efforts to protect development gains in the long run. This can be done using a combination of governance, risk assessment, knowledge management, vulnerability reduction and preparedness strategies. Local leadership, people’s participation, environmental resource management and continuous capability building are key elements of the process. Ultimately, risk management must be mainstreamed into local development to develop community resiliency.

Risk-based configuration control: Application of PSA in improving technical specifications and operational safety

International Nuclear Information System (INIS)

Samanta, P.K.; Kim, I.S.; Vesely, W.E.

1992-01-01

Risk-based configuration control is the management of component configurations using a risk perspective to control risk and assure safety. A configuration, as used here, is a set of component operability statuses that define the state of a nuclear power plant. If the component configurations that have high risk implications do not occur, then the risk from the operation of nuclear power plants would be minimal. The control of component configurations, i.e., the management of component statuses, to minimize the risk from components being unavailable, becomes difficult, because the status of a standby safety system component is often not apparent unless it is tested. Controlling plant configuration from a risk-perspective can provide more direct risk control and also more operational flexibility by allowing looser controls in areas unimportant to risk. Risk-based configuration control approaches can be used to replace parts of nuclear power plant Technical Specifications. With the advances in probabilistic safety assessment (PSA) technology, such approaches to improve Technical Specifications and operational safety are feasible. In this paper, we present an analysis of configuration risks, and a framework for risk-based configuration control to achieve the desired control of risk-significant configurations during plant operation

Chemical process safety management within the Department of Energy

International Nuclear Information System (INIS)

Piatt, J.A.

1995-07-01

Although the Department of Energy (DOE) is not well known for its chemical processing activities, the DOE does have a variety of chemical processes covered under OSHA's Rule for Process Safety Management of Highly Hazardous Chemicals (the PSM Standard). DOE, like industry, is obligated to comply with the PSM Standard. The shift in the mission of DOE away from defense programs toward environmental restoration and waste management has affected these newly forming process safety management programs within DOE. This paper describes the progress made in implementing effective process safety management programs required by the PSM Standard and discusses some of the trends that have supported efforts to reduce chemical process risks within the DOE. In June of 1994, a survey of chemicals exceeding OSHA PSM or EPA Risk Management Program threshold quantities (TQs) at DOE sites found that there were 22 processes that utilized toxic or reactive chemicals over TQs; there were 13 processes involving flammable gases and liquids over TQs; and explosives manufacturing occurred at 4 sites. Examination of the survey results showed that 12 of the 22 processes involving toxic chemicals involved the use of chlorine for water treatment systems. The processes involving flammable gases and liquids were located at the Strategic Petroleum Reserve and Naval petroleum Reserve sites

Risk-based safety indicators

International Nuclear Information System (INIS)

Sedlak, J.

2001-12-01

The report is structured as follows: 1. Risk-based safety indicators: Typology of risk-based indicators (RBIs); Tools for defining RBIs; Requirements for the PSA model; Data sources for RBIs; Types of risks monitored; RBIs and operational safety indicators; Feedback from operating experience; PSO model modification for RBIs; RBI categorization; RBI assessment; RBI applications; Suitable RBI applications. 2. Proposal for risk-based indicators: Acquiring information from operational experience; Method of acquiring safety relevance coefficients for the systems from a PSA model; Indicator definitions; On-line indicators. 3. Annex: Application of RBIs worldwide. (P.A.)

Safety Management. An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden)); Salo, Ilkka (Dept. of Psychology, Lund Univ., Lund (Sweden))

2004-11-15

A systems perspective on safety management is introduced followed by two briefly presented case studies of safety management in non-nuclear contexts. The first study concerns a car manufacturer and the second study a road traffic tunnel system. The risks of a car accident in the first case study are evident. The great exposure generates many incidents and accidents. In the second study, the rather low traffic intensity through the tunnel produces few incidents and accidents and only a few fatal accidents over the years. Yet, the risk of the individual traveler is much greater in the tunnel than on the average road. The case studies are presented in a systems perspective with emphasis on information feedback about the risks of the systems. The first case study illustrates high quality safety management, while the second case study shows many weaknesses of the safety management in the tunnel system. Some differences in safety management between the case studies are noted. The last part of the study presents an organizational perspective on safety management and offers alternative theoretical perspectives on the concept of safety management. The report shows that further studies are needed both (1) to develop a frame of reference for describing safety management across industries and activities and (2) to collect data illustrating of good and poor safety management. Then, the results can be used to strengthen and/or improving safety management in the nuclear power industry and its regulators

Safety Management. An Introduction to a Frame of Reference Exemplified with Case Studies from Non-Nuclear Contexts

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka

2004-11-01

A systems perspective on safety management is introduced followed by two briefly presented case studies of safety management in non-nuclear contexts. The first study concerns a car manufacturer and the second study a road traffic tunnel system. The risks of a car accident in the first case study are evident. The great exposure generates many incidents and accidents. In the second study, the rather low traffic intensity through the tunnel produces few incidents and accidents and only a few fatal accidents over the years. Yet, the risk of the individual traveler is much greater in the tunnel than on the average road. The case studies are presented in a systems perspective with emphasis on information feedback about the risks of the systems. The first case study illustrates high quality safety management, while the second case study shows many weaknesses of the safety management in the tunnel system. Some differences in safety management between the case studies are noted. The last part of the study presents an organizational perspective on safety management and offers alternative theoretical perspectives on the concept of safety management. The report shows that further studies are needed both (1) to develop a frame of reference for describing safety management across industries and activities and (2) to collect data illustrating of good and poor safety management. Then, the results can be used to strengthen and/or improving safety management in the nuclear power industry and its regulators

Essentials of Risk Management. Strategic Decisions. Board Basics.

Science.gov (United States)

Sonenstein, Burton; Kumin, Laura A.

1998-01-01

This booklet, intended for trustees of institutions of higher education, offers some instruction on the principles of risk management. Introductory information provides a definition of risk management, which is seen as a planning and strategic function, not solely as a financial or safety assessment. Individual sections then address the following…

Evaluation of safety management in an Appliances manufacturing company

Directory of Open Access Journals (Sweden)

F. Golbabaei

2015-01-01

Full Text Available Introduction: Prevention of accidents and work related diseases, are not allowed regardless of the safety of employees, customers, contractors and other persons. Assessment of individual safety management activities could reduce many losses. Present study aimed to evaluate the safety management of a household appliance manufacturing company.  .Material and Method: This study has done in a household appliance manufacturing company in Damavand city. Two questionnaires were firstly designed based on the weighted scores. The questionnaire 1 consisted of 4 indicators: Safety of machinery, Electrical safety, Risk assessment and Fire safety. Questionnaire 2 consisted of 11 sub indicators. Both questionnaires were completed by 30 HSE experts and supervisors. Reliability of questionnaires was based on cronbachs alpha coefficient. the safety status of each unit was determined and scored using information acquired by the questionnaires. Lastly, the safety of the entire company was determined.  .Result: Results showed that in safety management: the pressing and store house were in a good range of 66.66 and 60.12 points. Powder painting, enameling, laboratory were in a average range of 56.25, 55.92 and 54.15 points. Assembling and door storage were in a week range of 46.06 points.  .Conclusion: The findings showed that the safety status in the studied appliances company is in average range with 55.45 points. Therefore, it is recommended that the safety indicators should be improved for the betterment of the safety management in the company.

Risk management of non-renewable energy systems

CERN Document Server

Verma, Ajit Kumar; Muruva, Hari Prasad

2015-01-01

This book describes the basic concepts of risk and reliability with detailed descriptions of the different levels of probabilistic safety assessment of nuclear power plants (both internal and external). The book also maximizes readers insights into time dependent risk analysis through several case studies, whilst risk management with respect to non renewable energy sources is also explained. With several advanced reactors utilizing the concept of passive systems, the reliability estimation of these systems are explained in detail with the book providing a reliability estimation of components through mechanistic model approach. This book is useful for advanced undergraduate and post graduate students in nuclear engineering, aerospace engineering, industrial engineering, reliability and safety engineering, systems engineering and applied probability and statistics. This book is also suitable for one-semester graduate courses on risk management of non renewable energy systems in all conventional engineering bran...

THE ISSUES OF MANAGEMENT OF ENVIRONMENTAL-TECHNOGENIC SAFETY AND THE RISKS OF EMERGENCY SITUATIONS BY GEORGIA'S PROVINCES

International Nuclear Information System (INIS)

Tsikhelashvili, Z.; Zakutashvili, G.; Akhvlediani, T.; Verulava, G.

2008-01-01

The issues of management of environmentasl-technogenic safety and the risks of emergency situations by Georgia's provinces are discussed. It is justified that the development of the program of decreasing the risk of emergency situations and mitigating the consequences of such situations according to Georgia's provinces is essential nowadays. The program should involve the following tasks: 1. Working-out and development of scientific-methodological bases for management of risks of emergency situations; 2. Working-out of standard-legal and methodological bases for providing the state and international control and standardization of risks of emergency situations and for mitigation of the consequences of such situations. 3. Development of economic tools for controlling the activities associated with decreasing the risks and mitigating the consequences of emergency situations. 4. Designing of forecast and monitoring systems. 5. Designing of automated control systems, improvement of communication and warning systems etc. (author)

Patient safety risk assessment and risk management: A review on Indian hospitals

Directory of Open Access Journals (Sweden)

Gaurav Sharma

2011-01-01

Full Text Available This paper is intended to discuss a critical need expressed by present healthcare system of India, and how to provide a better health facility and diluting the medication errors caused by inappropriate management of the hospitals. Adverse events related to medication occur due to pathetic infrastructures, corporal punishment by the patient if unsatisfied, doctors on strike and working only for riches, trivial financial aid, and lack of basic amenities in the government-run hospitals of India. Government should reduce the barriers of awareness, accountability, ability, and action into accelerators of patient safety in the government organizations. Physicians, nurses, and pharmacists are truly the critical ingredient to rapid safety practice adoption. Various approaches like Technological Iatrogenesis, Computerized Provider Order Entry, and Electronic Health Record should be used. Although patient safety is recognized as a serious issue in health system, there is an urgent need for development and implementation of strategies for prevention and early detection of errors.

A systems approach to risk management through leading safety indicators

International Nuclear Information System (INIS)

Leveson, Nancy

2015-01-01

The goal of leading indicators for safety is to identify the potential for an accident before it occurs. Past efforts have focused on identifying general leading indicators, such as maintenance backlog, that apply widely in an industry or even across industries. Other recommendations produce more system-specific leading indicators, but start from system hazard analysis and thus are limited by the causes considered by the traditional hazard analysis techniques. Most rely on quantitative metrics, often based on probabilistic risk assessments. This paper describes a new and different approach to identifying system-specific leading indicators and provides guidance in designing a risk management structure to generate, monitor and use the results. The approach is based on the STAMP (System-Theoretic Accident Model and Processes) model of accident causation and tools that have been designed to build on that model. STAMP extends current accident causality to include more complex causes than simply component failures and chains of failure events or deviations from operational expectations. It incorporates basic principles of systems thinking and is based on systems theory rather than traditional reliability theory. - Highlights: • Much effort has gone into developing leading indicators with only limited success. • A systems-theoretic, assumption-based approach may be more successful. • Leading indicators are warning signals of an assumption’s changing vulnerability. • Heuristic biases can be controlled by using plausibility rather than likelihood

Integration of safety in management tasks in onshore transport SME´s

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2015-01-01

with animals and the risk of violence and robbery. To create a high level of safety in an enterprise is a difficult task that demands a great degree of management engagement. It is not only a question of having the right equipment, procedures and organization etc.; it is also necessary for everyone...... in the enterprise to have an understanding of safety and feel obligated to take responsibility for safety in all work at all times. Accident research shows that safety must be integrated in the whole enterprise and function on all levels of management, while it must also involve all employees in their daily work...... prevention. The result is a realistic strategy for integration safety, quality and environmental factors in an SME and procedures for how to go from strategy to action. Different tools were developed to fulfil the strategy ranging from risk identification, involvement of the employee and motivational...

FLUOR HANFORD SAFETY MANAGEMENT PROGRAMS

Energy Technology Data Exchange (ETDEWEB)

GARVIN, L. J.; JENSEN, M. A.

2004-04-13

This document summarizes safety management programs used within the scope of the ''Project Hanford Management Contract''. The document has been developed to meet the format and content requirements of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''. This document provides summary descriptions of Fluor Hanford safety management programs, which Fluor Hanford nuclear facilities may reference and incorporate into their safety basis when producing facility- or activity-specific documented safety analyses (DSA). Facility- or activity-specific DSAs will identify any variances to the safety management programs described in this document and any specific attributes of these safety management programs that are important for controlling potentially hazardous conditions. In addition, facility- or activity-specific DSAs may identify unique additions to the safety management programs that are needed to control potentially hazardous conditions.

The spread model of food safety risk under the supply-demand disturbance.

Science.gov (United States)

Wang, Jining; Chen, Tingqiang

2016-01-01

In this paper, based on the imbalance of the supply-demand relationship of food, we design a spreading model of food safety risk, which is about from food producers to consumers in the food supply chain. We use theoretical analysis and numerical simulation to describe the supply-demand relationship and government supervision behaviors' influence on the risk spread of food safety and the behaviors of the food producers and the food retailers. We also analyze the influence of the awareness of consumer rights protection and the level of legal protection of consumer rights on the risk spread of food safety. This model contributes to the explicit investigation of the influence relationship among supply-demand factors, the regulation behavioral choice of government, the behavioral choice of food supply chain members and food safety risk spread. And this paper provides a new viewpoint for considering food safety risk spread in the food supply chain, which has a great reference for food safety management.

A review on the risk management terminology for the use in standards

International Nuclear Information System (INIS)

Lee, Yong Hee; Lee, Jung Woon

2001-03-01

This technical report describes a result of reviews on the risk management terminology for the use in standards. Experiences in related technical fields and their definitions are reviewed according to the concepts and operational definitions of risk terminologies. It results into a draft standard for KS in the fields of product safety. Quality Assurance, Industrial and Occupational Safety, Financial Management and Risk Management, and others may show many different definitions for their own technical purpose. A draft KS standard for risk terminology must be revised and enhanced to be adopted to the product safety. However, this review does not provide a strict guide for use in the operational definitions of risk terms, but does provide a common base among application areas. The result of this review is submitted to Korea Standard Association in form of a draft KS standards, KS X 0000 : 2001 (ISO TBD : 1999), titled as ' Risk management terminology - Guidelines for use in standards '

Food Safety Management in a Global Environment: The Role of Risk Assessment Models

OpenAIRE

Fuentes-Pila, Joaquin; Jimeno, Vicente; Manzano, Amparo; Rodriguez Monroy, Carlos; Mar Fernandez, Maria Del

2006-01-01

Quantitative risk assessment models are playing a minor role in the development of the new EU legal framework for food safety. There is a tendency of the EU institutions to apply the precautionary principle versus the predisposition of the USA institutions to rely on risk analysis. This paper provides a comparison of the role played by quantitative risk assessment models in the development of new policies on food safety in the EU and in the USA, focusing on a study case: the supply chain of s...

Voluntary Safety Management System in the Manufacturing Industry – To What Extent does OHSAS 18001 Certification Help?

Directory of Open Access Journals (Sweden)

Paas Õnnela

2015-11-01

Full Text Available Occupational risk prevention can be managed in several ways. Voluntary safety management standard OHSAS 18001 is a tool, which is considered to give contribution in effective risk management in the manufacturing industry. The current paper examines the benefits of OHSAS 18001 based on the statistical analysis. MISHA method is used for safety audit in 16 Estonian enterprises. The results demonstrate the objectives why companies implement or are willing to implement OHSAS 18001, bring out differences in safety activities for 3 types of companies and determine correlations among different safety activity areas. The information is valuable for enterprises that are willing to improve their safety activities via a voluntary safety management system.

Safety management in nuclear technology. Proceedings

International Nuclear Information System (INIS)

2008-01-01

At the symposium of TueV Sued AG (Munich, Federal Republic of Germany) held in Munich on 28 and 29 October 2008, the following lectures were held: (1) Fundamental requirements of the management system in nuclear technology - Experiences from the international developments at IAEA and WENRA (M. Herttrich); (2) Information from a comparison of requirements of safety management systems (B. Kallenbach-Herbert); (3) Requirements of a modern management system in German nuclear power plants from the view of nuclear safety (D. Majer); (4) Requirements on safety management in module 8 of the regulations project (M. Maqua); (5) Requirements on the management system in nuclear power plants according to GRS-229 and developments at the KTA 1402 ''Integrated management system for safe operation of nuclear power plants (in progress)'' (C. Verstegen); (6) Experiences from the development and implementation of safety management systems in connection with the works management of a nuclear power plant (K. Ramler); (7) Design of a safety management system of a nuclear power plant in consideration of existing management systems (U. Naumann); (8) Experiences in the utilization and evaluation of a safety management system (J. Ritter); (9) Aspects of leadership of safety management systems (S. Seitz); (10) Management of safety or safety management system? Prevailing or administration? (A. Frischknecht); (11) Change management - strategies for successful transfer of new projects: How can I motivate co-workers for a further development of the safety management system? (U. Schnabel); (12) Requirements concerning indicators in integrated management systems and safety management systems (J. Stiller); (13) Integration of proactive and reactive indicators in the safety management system (B. Fahlbruch); (14) What do indicators show? About the use of indicators by regulatory authorities (A. Kern); (15) Safety management and radiation protection in nuclear technology (K. Grantner); (16) Any more

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

Management of safety culture

International Nuclear Information System (INIS)

Kavsek, D.

2004-01-01

The strengthening of safety culture in an organization has become an increasingly important issue for nuclear industry. A high level of safety performance is essential for business success in intensely competitive global environment. This presentation offers a discussion of some principles and activities used in enhancing safety performance and appropriate safety behaviour at the Krsko NPP. Over the years a number of events have occurred in nuclear industry that have involved problems in human performance. A review of these and other significant events has identified recurring weaknesses in plant safety culture and policy. Focusing attention on the strengthening of relevant processes can help plants avoid similar undesirable events. The policy of the Krsko NPP is that all employees concerned shall constantly be alert to opportunities to reduce risks to the lowest practicable level and to achieve excellence in plant safety. The most important objective is to protect individuals, society and the environment by establishing and maintaining an effective defense against radiological hazard in the nuclear power plant. It is achieved through the use of reliable structures, components, systems, and procedures, as well as plant personnel committed to a strong safety culture. The elements of safety culture include both organizational and individual aspects. Elements commonly included at the organizational level are senior management commitment to safety, organizational effectiveness, effective communication, organizational learning, and a culture that encourages identification and resolution of safety issues. Elements identified at the individual level include personal accountability, a questioning attitude, communication, procedural adherence, etc.(author)

Developing tools for the safety specification in risk management plans: lessons learned from a pilot project.

Science.gov (United States)

Cooper, Andrew J P; Lettis, Sally; Chapman, Charlotte L; Evans, Stephen J W; Waller, Patrick C; Shakir, Saad; Payvandi, Nassrin; Murray, Alison B

2008-05-01

Following the adoption of the ICH E2E guideline, risk management plans (RMP) defining the cumulative safety experience and identifying limitations in safety information are now required for marketing authorisation applications (MAA). A collaborative research project was conducted to gain experience with tools for presenting and evaluating data in the safety specification. This paper presents those tools found to be useful and the lessons learned from their use. Archive data from a successful MAA were utilised. Methods were assessed for demonstrating the extent of clinical safety experience, evaluating the sensitivity of the clinical trial data to detect treatment differences and identifying safety signals from adverse event and laboratory data to define the extent of safety knowledge with the drug. The extent of clinical safety experience was demonstrated by plots of patient exposure over time. Adverse event data were presented using dot plots, which display the percentages of patients with the events of interest, the odds ratio, and 95% confidence interval. Power and confidence interval plots were utilised for evaluating the sensitivity of the clinical database to detect treatment differences. Box and whisker plots were used to display laboratory data. This project enabled us to identify new evidence-based methods for presenting and evaluating clinical safety data. These methods represent an advance in the way safety data from clinical trials can be analysed and presented. This project emphasises the importance of early and comprehensive planning of the safety package, including evaluation of the use of epidemiology data.

The safety of risk or the risk of safety?

NARCIS (Netherlands)

Suddle, S.I.; Waarts, P.H.

2003-01-01

Safety is nowadays one of the main items on the agenda during the planning, realisation and management of most large-scale projects, particularly in infrastructure and building projects in intensively used areas such as multiple use of land projects. It is vital that safety aspects are properly

Risk management on nuclear power plant. Application of probabilistic risk assessment

International Nuclear Information System (INIS)

Kojima, Shigeo

2003-01-01

In U.S.A., nuclear safety regulation is moving to risk-informed regulation (RIR), so necessity of a standard to provide contents of probabilistic risk assessment (PRA) constructing its roots has been discussed for a long time. In 1998, the Committee on Nuclear Risk Management (CNRM) of the American Society of Mechanical Engineers (ASME) began to investigate the standard, of which last edition was published as the Standard for Probabilistic Risk Management for Nuclear Power Plant Applications: RA-S-2002 (PRMA) on April, 2002. As in the Committee, the Nuclear Regulatory Commission (NRC), electric power companies, national institutes, PRA specialists, and so on took parts to carry out many discussions with full energies of participants on risk management in U.S.A., the standard was finished after about four years' efforts. In U.S.A., risk management having already used PRA is successfully practiced, U.S.A. is at a stage with more advancing steps of the risk management than Japan is. Here was described on the standard of PRA and a concrete method of the risk management carried out at nuclear power stations. (G.K.)

Track 6: safety and risk management. Plant operational risk management. Plant Configuration Risk Assessment Methodology Development for Periodic Maintenance

International Nuclear Information System (INIS)

Yang, Huichang; Chung, Chang Hyun; Sung, Key Yong

2001-01-01

As the operation experiences of nuclear power plants (NPPs) in Korea accumulate and NPP safety functions become enhanced, the role of stable and optimal NPP operation within acceptable safety criteria becomes important at present. To accomplish the goal of safe and optimal operation, maintenance and its related activities should be regarded as the issues of most concern. Studies of methodologies for maintenance improvement and optimization have focused on system performance rather than on the hardware itself. From this point of view, the probabilistic methods are most useful. In terms of risk including core damage frequency and unavailability, the cause that might impact plant safety during normal maintenance activities can be identified and evaluated effectively. The results from these probabilistic analyses can provide insightful information for the reallocation of risk-contributing maintenance activity. This information can be utilized in a way that separates the significant risk-contributing maintenance activities from each other unless they are timely related. In Korea, the risk-monitoring program for operating NPPs is under development and will be implemented in 2003. To accomplish the risk-monitoring program objectives, suitable risk evaluation methods should be developed before the implementation of the risk-monitoring program. The plant configuration assessment methodology was developed for these reasons, and this method is to incorporate the field experiences into the risk calculation exactly within the limit of probabilistic methods. During normal plant operation, the plant operational risk changes frequently depending on the status of the plant system and the arrangement of the components. Specific plant systems or components are typically removed from service because of random equipment failure, planned preventive/predictive maintenance, corrective maintenance, surveillance testing, and operational bypass activities, and such events usually impact the

Approaches to construction of systems of safety management in airlines

Directory of Open Access Journals (Sweden)

2015-01-01

Full Text Available The article presents three approaches of building a safety management system (SMS in airlines in the framework of implementation of ICAO SARPs that apply methods of risk assessment based on use of operational activity of airline taking into account existing and implementing "protections" or "safety barriers".

Public safety risk management at socio-economic and / or historic-cultural significant dam sites

Energy Technology Data Exchange (ETDEWEB)

Earle, Gordon D.; Ryan, Katherine; Pyykonen, Nicole K.; Pitts, Lucas [Otonabee Region Conservation Authority, Peterborough, (Canada)

2010-07-01

The Lang Dam and adjoining gristmill, located near Peterborough are integral parts of the Lang Pioneer Village museum. Activities occurring within close proximity to the dam have led to safety issues. The owner (ORCA) has developed and implemented public safety management plans (PSMPs) for each of its water control structures, including the Lang Dam. ORCA gave special attention to the social, economic, aesthetic, historic and cultural dimensions associated the implementation of public safety management plans. These factors play a significant role in how well public safety measures (PSMs) are received by stakeholder groups and the general public. This paper reported the challenges of developing and implementing a PSMP for the Lang Dam, with the focus on property site-specific PSMS while preserving socio-economic and historic-cultural character and values. It was demonstrated that the dam owners, regulatory authorities, control agencies and preservationists need to come together to develop a holistic public safety management process.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

Science.gov (United States)

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Risk-informed decision making a keystone in advanced safety assessment

International Nuclear Information System (INIS)

Reinhart, M.

2007-01-01

Probabilistic Safety Assessment (PSA) has provided extremely valuable complementary insight, perspective, comprehension, and balance to deterministic nuclear reactor safety assessment. This integrated approach of risk-informed management and decision making has been called Risk-Informed Decision Making (RIDM). RIDM provides enhanced safety, reliability, operational flexibility, reduced radiological exposure, and improved fiscal economy. Applications of RIDM continuously increase. Current applications are in the areas of design, construction, licensing, operations, and security. Operational phase safety applications include the following: technical specifications improvement, risk-monitors and configuration control, maintenance planning, outage planning and management, in-service inspection, inservice testing, graded quality assurance, reactor oversight and inspection, inspection finding significance determination, operational events assessment, and rulemaking. Interestingly there is a significant spectrum of approaches, methods, programs, controls, data bases, and standards. The quest of many is to assimilate the full compliment of PSA and RIDM information and to achieve a balanced international harmony. The goal is to focus the best of the best, so to speak, for the benefit of all. Accordingly, this presentation will address the principles, benefits, and applications of RIDM. It will also address some of the challenges and areas to improve. Finally it will highlight efforts by the IAEA and others to capture the international thinking, experience, successes, challenges, and lessons in RIDM. (authors)

Theories of risk and safety: what is their relevance to nursing?

Science.gov (United States)

Cooke, Hannah

2009-03-01

The aim of this paper is to review key theories of risk and safety and their implications for nursing. The concept of of patient safety has only recently risen to prominence as an organising principle in healthcare. The paper considers the wider social context in which contemporary concepts of risk and safety have developed. In particular it looks at sociological debates about the rise of risk culture and the risk society and their influence on the patient safety movement. The paper discusses three bodies of theory which have attempted to explain the management of risk and safety in organisations: normal accident theory, high reliability theory, and grid-group cultural theory. It examine debates between these theories and their implications for healthcare. It discusses reasons for the dominance of high reliability theory in healthcare and its strengths and limitations. The paper suggest that high reliability theory has particular difficulties in explaining some aspects of organisational culture. It also suggest that the implementation of high reliability theory in healthcare has involved over reliance on numerical indicators. It suggests that patient safety could be improved by openness to a wider range of theoretical perspectives.

An enhanced data-analytic framework for integrating risk management and performance management

International Nuclear Information System (INIS)

Thekdi, Shital; Aven, Terje

2016-01-01

There is increasing interest for agencies and industries to develop risk management processes for a wide variety of applications. Traditional risk management processes are motivated by controlling risk and avoiding losses. In contrast, other organizational processes focus on managing performance and value generation. In this paper we argue that risk management also adds an important contribution to these processes. However, this requires “proper” risk management extending beyond narrow safety oriented perspectives built on quantitative risk analysis and tolerability/acceptance criteria. There is need for a broad risk-performance framework with uncertainty being a main component of risk, and where knowledge and surprises are adequately reflected. In the paper we present and discuss such a framework. The framework is developed on the basis of an analysis of combinations of different risk management and performance management practices/policies. We show how the risk and performance management processes can be improved by proper risk conceptualization and a holistic thinking on how to develop and use goals in the organization, how to balance different concerns, and consider the need for agility – “sensitivity to operations”, as well as how to give weight to vulnerabilities, resilience, and antifragility. - Highlights: • We relate key performance management and risk management principles. • We propose an enhanced framework to unify thinking of performance and risk. • We apply the framework to a public-private partnership case study.

Integrating environment health and safety management at Petro-Canada

International Nuclear Information System (INIS)

Raymond, G.

1993-01-01

Petro-Canada has developed a tool to integrate, measure, and improve its management systems of environment, health, and safety (EH ampersand S). This tool, called the Total Loss Management System, is described in the areas of general management issues, policies and procedures, evaluations, organization, stewardship, issue management, and performance measures. Petro-Canada's policies on occupational health and safety are consistent with its environmental policy, being structured in the same way. An integrated audit system is used to cover health, safety, industrial hygiene, reliability, environment, and risk management. EH ampersand S matters are integrated at the corporate level in a separate department. Regional divisions review EH ampersand S performance every month, incidents are discussed, and preventive measures are taken as necessary. Regional performances are combined every quarter for ultimate presentation to the Petro-Canada board. New or emerging issues that may affect divisions are assigned an issue sponsor, a member of divisional management who makes sure the issue receives the resources necessary to study and define its impact. Examples of issues include soil contamination, process hazard management, and benzene exposure limits. Performance measures flow from the corporate environment and occupational health and safety policies, and come in two types: those that measure activities to improve performance and those that measure the outcome of the activities

Integrated, regional approach to risk management of industrial systems

International Nuclear Information System (INIS)

Chakraborty, S.

1992-01-01

This paper focuses on the following four main issues: (1) necessity for an integrated, regional approach to risk management of industrial systems; (2) principles of risk management; (3) integrated approach and overall methodology; and (4) implementation of risk management strategies on a regional basis. The U.N. Interagency project on risk management for large industrial areas, which is a pioneer type of international initiative for an integrated approach to risk management, is discussed in this context. Another encouraging activity for further development of overall methodologies for risk management is the ongoing project on the risk and safety of technical systems at the Swiss Federal Institute of Technology in Aurich. The concept of integral risk management takes into account multidimensional factors including technical, economic, political, social, and ethical considerations to allow a well-balanced decision-making process

Risk management model in road transport systems

Science.gov (United States)

Sakhapov, R. L.; Nikolaeva, R. V.; Gatiyatullin, M. H.; Makhmutov, M. M.

2016-08-01

The article presents the results of a study of road safety indicators that influence the development and operation of the transport system. Road safety is considered as a continuous process of risk management. Authors constructed a model that relates the social risks of a major road safety indicator - the level of motorization. The model gives a fairly accurate assessment of the level of social risk for any given level of motorization. Authors calculated the dependence of the level of socio-economic costs of accidents and injured people in them. The applicability of the concept of socio-economic damage is caused by the presence of a linear relationship between the natural and economic indicators damage from accidents. The optimization of social risk is reduced to finding the extremum of the objective function that characterizes the economic effect of the implementation of measures to improve safety. The calculations make it possible to maximize the net present value, depending on the costs of improving road safety, taking into account socio-economic damage caused by accidents. The proposed econometric models make it possible to quantify the efficiency of the transportation system, allow to simulate the change in road safety indicators.

[Design, implementation and evaluation of a management model of patient safety in hospitals in Catalonia, Spain].

Science.gov (United States)

Saura, Rosa Maria; Moreno, Pilar; Vallejo, Paula; Oliva, Glòria; Alava, Fernando; Esquerra, Miquel; Davins, Josep; Vallès, Roser; Bañeres, Joaquim

2014-07-01

Since its inception in 2006, the Alliance for Patient Safety in Catalonia has played a major role in promoting and shaping a series of projects related to the strategy of the Ministry of Health, Social Services and Equality, for improving patient safety. One such project was the creation of functional units or committees of safety in hospitals in order to facilitate the management of patient safety. The strategy has been implemented in hospitals in Catalonia which were selected based on criteria of representativeness. The intervention was based on two lines of action, one to develop the model framework and the other for its development. Firstly the strategy for safety management based on EFQM (European Foundation for Quality Management) was defined with the development of standards, targets and indicators to implement security while the second part involved the introduction of tools, methodologies and knowledge to the management support of patient safety and risk prevention. The project was developed in four hospital areas considered higher risk, each assuming six goals for safety management. Some of these targets such as the security control panel or system of adverse event reporting were shared. 23 hospitals joined the project in Catalonia. Despite the different situations in each centre, high compliance was achieved in the development of the objectives. In each of the participating areas the security control panel was developed. Stable structures for safety management were established or strengthened. Training in patient safety played and important role, 1415 professionals participated. Through these kind of projects not only have been introduced programs of proven effectiveness in reducing risks, but they also provide to the facilities a work system that allows autonomy in diagnosis and analysis of the different risk situations or centre specific safety issues. Copyright © 2014. Published by Elsevier Espana.

IAEA Safety Standards on Management Systems and Safety Culture

International Nuclear Information System (INIS)

Persson, Kerstin Dahlgren

2007-01-01

The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

Health and Safety Management for Small-scale Methane Fermentation Facilities

Science.gov (United States)

Yamaoka, Masaru; Yuyama, Yoshito; Nakamura, Masato; Oritate, Fumiko

In this study, we considered health and safety management for small-scale methane fermentation facilities that treat 2-5 ton of biomass daily based on several years operation experience with an approximate capacity of 5 t·d-1. We also took account of existing knowledge, related laws and regulations. There are no qualifications or licenses required for management and operation of small-scale methane fermentation facilities, even though rural sewerage facilities with a relative similar function are required to obtain a legitimate license. Therefore, there are wide variations in health and safety consciousness of the operators of small-scale methane fermentation facilities. The industrial safety and health laws are not applied to the operation of small-scale methane fermentation facilities. However, in order to safely operate a small-scale methane fermentation facility, the occupational safety and health management system that the law recommends should be applied. The aims of this paper are to clarify the risk factors in small-scale methane fermentation facilities and encourage planning, design and operation of facilities based on health and safety management.

Road safety issues for bus transport management.

Science.gov (United States)

Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

2013-11-01

Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

The role of organization and culture in risk management

International Nuclear Information System (INIS)

Rodney, G.A.

1992-01-01

Technology-based organizations recognize that risk is an inherent element of their business. The challenge for managers is to determine an approach to risk that balances operational requirements with safety policies and regulations. The consequences of a safety approach that is not rigorous enough can be serious. Yet, attempting to achieve a totally risk-free operation literally can preclude much of the risk-taking that must characterize high-technology programs. Achieving true balance between performance and safety means first determining the level of risk that is acceptable to your organization. One of the first steps is to understand how the organizational structure and culture influence risk decisions. Organizational structure defines the manner in which the work force will participate in the risk decision-making process and whether they will have the necessary resources to estimate risk effectively. While numerous analysis techniques are available to predict and evaluate technical risks, it's more difficult to gauge the intangible impact of culture. Culture refers to the prevailing safety attitudes in the workplace and the methods used to evaluate risk. For this discussion, risk refers to safety and mission success. Application can be made to the nuclear industry

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

Managing electrical safety

CERN Document Server

Wiggins, James H, Jr

2001-01-01

Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

Real-time safety risk assessment based on a real-time location system for hydropower construction sites.

Science.gov (United States)

Jiang, Hanchen; Lin, Peng; Fan, Qixiang; Qiang, Maoshan

2014-01-01

The concern for workers' safety in construction industry is reflected in many studies focusing on static safety risk identification and assessment. However, studies on real-time safety risk assessment aimed at reducing uncertainty and supporting quick response are rare. A method for real-time safety risk assessment (RTSRA) to implement a dynamic evaluation of worker safety states on construction site has been proposed in this paper. The method provides construction managers who are in charge of safety with more abundant information to reduce the uncertainty of the site. A quantitative calculation formula, integrating the influence of static and dynamic hazards and that of safety supervisors, is established to link the safety risk of workers with the locations of on-site assets. By employing the hidden Markov model (HMM), the RTSRA provides a mechanism for processing location data provided by the real-time location system (RTLS) and analyzing the probability distributions of different states in terms of false positives and negatives. Simulation analysis demonstrated the logic of the proposed method and how it works. Application case shows that the proposed RTSRA is both feasible and effective in managing construction project safety concerns.

Linking better shiftwork arrangements with safety and health management systems.

Science.gov (United States)

Kogi, Kazutaka

2004-12-01

Various support measures useful for promoting joint change approaches to the improvement of both shiftworking arrangements and safety and health management systems were reviewed. A particular focus was placed on enterprise-level risk reduction measures linking working hours and management systems. Voluntary industry-based guidelines on night and shift work for department stores and the chemical, automobile and electrical equipment industries were examined. Survey results that had led to the compilation of practicable measures to be included in these guidelines were also examined. The common support measures were then compared with ergonomic checkpoints for plant maintenance work involving irregular nightshifts. On the basis of this analysis, a new night and shift work checklist was designed. Both the guidelines and the plant maintenance work checkpoints were found to commonly cover multiple issues including work schedules and various job-related risks. This close link between shiftwork arrangements and risk management was important as shiftworkers in these industries considered teamwork and welfare services to be essential for managing risks associated with night and shift work. Four areas found suitable for participatory improvement by managers and workers were work schedules, ergonomic work tasks, work environment and training. The checklist designed to facilitate participatory change processes covered all these areas. The checklist developed to describe feasible workplace actions was suitable for integration with comprehensive safety and health management systems and offered valuable opportunities for improving working time arrangements and job content together.

Development of an effective risk management system in a teaching hospital.

Science.gov (United States)

Adibi, Hossein; Khalesi, Nader; Ravaghi, Hamid; Jafari, Mahdi; Jeddian, Ali Reza

2012-09-21

Unsafe health care provision is a main cause of increased mortality rate amongst hospitalized patients all over the world. A system approach to medical error and its reduction is crucial that is defined by clinical and administrative activities undertaken to identify, evaluate, and reduce the risk of injury. The aim of this study was to develop and implement a risk management system in a large teaching hospital in Iran, especially of the basis of WHO guidelines and patient safety context. WHO draft guideline and patient safety reports from different countries were reviewed for defining acceptable framework of risk management system. Also current situation of mentioned hospital in safety matter and dimensions of patient safety culture was evaluated using HSOPSC questionnaire of AHRQ. With adjustment of guidelines and hospital status, the conceptual framework was developed and next it was validated in expert panel. The members of expert panel were selected according to their role and functions and also their experiences in risk management and patient safety issues. The validated framework consisted of designating a leader and coordinator core, defining communications, and preparing the infrastructure for patient safety education and culture-building. That was developed on the basis of some values and commitments and included reactive and proactive approaches. The findings of reporting activities demonstrated that at least 3.6 percent of hospitalized patients have experienced adverse events and 5.3 percent of all deaths in the hospital related with patient safety problems. Beside the average score of 12 dimensions of patient safety culture was 46.2 percent that was considerably low. The "non-punitive responses to error" had lowest positive score with 21.2 percent. It is of paramount importance for all health organizations to lay necessary foundations in order to identify safety risks and improve the quality of care. Inadequate participation of staff in education

Thermonuclear generation program: risks and safety; Programa de geracao termonuclear: seus riscos e segurancas

Energy Technology Data Exchange (ETDEWEB)

Goes, Alexandre Gromann de Araujo

1999-07-01

This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process.

Sustainable promotion nuclear power enterprise procurement bidding risk management

International Nuclear Information System (INIS)

Wu Yimin

2014-01-01

Nuclear power enterprise procurement bidding work faced with certain risk in recent years, the domestic nuclear power enterprises in the bidding work never stop research and explore the effective ways to guard against legal risks, and has made considerable progress, the eighteenth big country advocates the safety and efficiency of nuclear power development policy, in the face of the subsequent nuclear power construction projects have started, nuclear power enterprise bidding risk management work shoulder heavy responsibilities article through nuclear power enterprise procurement bidding risk management present situation, proposed the sustainable promotion nuclear power enterprise procurement bidding risk management countermeasures. (author)

A summary of the Nordic-group conference on safety management

International Nuclear Information System (INIS)

Salo, I.; Svenson, O.

2005-04-01

The report summarizes the Nordic-group conference on safety management, which took place in Lund, Sweden on October 28-29, 2004. The theme-group was originally created by researchers who had a common interest in cooperation, sharing their results, and discuss topics focusing on safety management and safety culture in nuclear power production, but also in other technologies involving risks. The research has, so far, basically been related to the areas of MTO, partly from a psychological perspective, but also from other perspectives. Today, the group consists primarily of members from Sweden, Finland and Norway. During the last three years the group has gathered twice a year. (au)

Implementation of the safety culture for HANARO Safety Management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which the management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of the safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of safety management in nuclear activities for a reactor application and utilization has also been emphasized more than 10 years in HANARO which is a 30 MW multi-purpose research reactor and achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation like the seminars and lectures related to safety matters, participation in international workshops, the development of safety culture indicators, the survey on the attitude of safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e-Learning program for safety education. (author)

Management system of health and safety work (SMK3) with job safety analysis (JSA) in PT. Nira Murni construction

Science.gov (United States)

Melliana, Armen, Yusrizal, Akmal, Syarifah

2017-11-01

PT Nira Murni construction is a contractor of PT Chevron Pacific Indonesia which engaged in contractor, fabrication, maintenance construction suppliers, and labor services. The high of accident rate in this company is caused the lack of awareness of workplace safety. Therefore, it requires an effort to reduce the accident rate on the company so that the financial losses can be minimized. In this study, Safe T-Score method is used to analyze the accident rate by measuring the level of frequency. Analysis is continued using risk management methods which identify hazards, risk measurement and risk management. The last analysis uses Job safety analysis (JSA) which will identify the effect of accidents. From the result of this study can be concluded that Job Safety Analysis (JSA) methods has not been implemented properly. Therefore, JSA method needs to follow-up in the next study, so that can be well applied as prevention of occupational accidents.

The new risk paradigm for chemical process security and safety.

Science.gov (United States)

Moore, David A

2004-11-11

The world of safety and security in the chemical process industries has certainly changed since 11 September, but the biggest challenges may be yet to come. This paper will explain that there is a new risk management paradigm for chemical security, discuss the differences in interpreting this risk versus accidental risk, and identify the challenges we can anticipate will occur in the future on this issue. Companies need to be ready to manage the new chemical security responsibilities and to exceed the expectations of the public and regulators. This paper will outline the challenge and a suggested course of action.

The Legitimacy of Safety Management Systems in the Minds of Norwegian Seafarers

Directory of Open Access Journals (Sweden)

Bjarne Vandeskog

2015-03-01

Full Text Available All seafarers I have met are concerned with their own safety and all serious shipping companies, national regulatory authorities, unions and larger shipping clients work to improve safety at sea. Formalised risk management systems are at the heart of these efforts, and there is good reason to believe that they have been very successful. One would therefore expect that seafarers had a positive attitude and were committed to their implementation. Empirical data suggests the opposite. During observational fieldworks over the last two and a half years, on eight different ships in Norway, Australia and Malaysia, not one of the observed seafarers expressed mainly positive opinions about the safety management systems imposed on them. The great majority of seafarers whose opinions have been recorded expressed massive negative sentiments. Assuming a Weberian perspective this paper explores how the bureaucratic implementation of such risk management systems may contribute to this picture.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose

A generic standard for assessing and managing activities with significant risk to health and safety

International Nuclear Information System (INIS)

Wilde, T.S.; Sandquist, G.M.

2005-01-01

Some operations and activities in industry, business, and government can present an unacceptable risk to health and safety if not performed according to established safety practices and documented procedures. The nuclear industry has extensive experience and commitment to assessing and controlling such risks. This paper provides a generic standard based upon DOE Standard DOE-STD-3007- 93, Nov 1993, Change Notice No. 1, Sep 1998. This generic standard can be used to assess practices and procedures employed by any industrial and government entity to ensure that an acceptable level of safety and control prevail for such operations. When any activity and operation is determined to involve significant risk to health and safety to workers or the public, the organization should adopt and establish an appropriate standard and methodology to ensure that adequate health and safety prevail. This paper uses DOE experience and standards to address activities with recognized potential for impact upon health and safety. Existing and future assessments of health and safety issues can be compared and evaluated against this generic standard for insuring that proper planning, analysis, review, and approval have been made. (authors)

Handbook on Decision Making Vol 2 Risk Management in Decision Making

CERN Document Server

Lu, Jie; Zhang, Guangquan

2012-01-01

This book presents innovative theories, methodologies, and techniques in the field of risk management and decision making. It introduces new research developments and provides a comprehensive image of their potential applications to readers interested in the area. The collection includes: computational intelligence applications in decision making, multi-criteria decision making under risk, risk modelling,forecasting and evaluation, public security and community safety, risk management in supply chain and other business decision making, political risk management and disaster response systems. The book is directed to academic and applied researchers working on risk management, decision making, and management information systems.

How to interpret safety critical failures in risk and reliability assessments

International Nuclear Information System (INIS)

Selvik, Jon Tømmerås; Signoret, Jean-Pierre

2017-01-01

Management of safety systems often receives high attention due to the potential for industrial accidents. In risk and reliability literature concerning such systems, and particularly concerning safety-instrumented systems, one frequently comes across the term ‘safety critical failure’. It is a term associated with the term ‘critical failure’, and it is often deduced that a safety critical failure refers to a failure occurring in a safety critical system. Although this is correct in some situations, it is not matching with for example the mathematical definition given in ISO/TR 12489:2013 on reliability modeling, where a clear distinction is made between ‘safe failures’ and ‘dangerous failures’. In this article, we show that different interpretations of the term ‘safety critical failure’ exist, and there is room for misinterpretations and misunderstandings regarding risk and reliability assessments where failure information linked to safety systems are used, and which could influence decision-making. The article gives some examples from the oil and gas industry, showing different possible interpretations of the term. In particular we discuss the link between criticality and failure. The article points in general to the importance of adequate risk communication when using the term, and gives some clarification on interpretation in risk and reliability assessments.

Automatic road traffic safety management system in urban areas

Directory of Open Access Journals (Sweden)

Oskarbski Jacek

2017-01-01

Full Text Available Traffic incidents and accidents contribute to decreasing levels of transport system reliability and safety. Traffic management and emergency systems on the road, using, among others, automatic detection, video surveillance, communication technologies and institutional solutions improve the organization of the work of various departments involved in traffic and safety management. Automation of incident management helps to reduce the time of a rescue operation as well as of the normalization of the flow of traffic after completion of a rescue operation, which also affects the reduction of the risk of secondary accidents and contributes to reducing their severity. The paper presents the possibility of including city traffic departments in the process of incident management. The results of research on the automatic incident detection in cities are also presented.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose

Application of life-cycle information for advancement in safety of nuclear fuel cycle facilities. Application of safety information to advanced safety management support system

International Nuclear Information System (INIS)

Suzuki, Kazuhiko; Ishida, Michihiko

2005-08-01

Risk management is major concern to nuclear energy reprocessing plants to improve plant and process reliability and ensure their safety. This is because we are required to predict potential risks before any accident or disaster occurs. The advancement of safety design and safety systems technologies showed large amount of useful safety-related knowledge that can be of great importance to plant operation to reduce operation risks and ensure safety. This research proposes safety knowledge modeling framework on the basis of ontology technologies to systematically construct plant knowledge model, which includes plant structure, operation, and the associated behaviors. In such plant knowledge model safety related information is defined and linked to the different elements of plant knowledge model. Ontology editor is employed to define the basic concepts and their inter-relations, which are used to capture and construct plant safety knowledge. In order to provide detailed safety knowledgebase, HAZOP results are analyzed and structured so that safety-related knowledge are identified and structured within the plant knowledgebase. The target safety knowledgebase includes: failures, deviations, causes, consequences, and fault propagation as mapped to plant knowledge. The proposed ontology-based safety framework is applied on case study nuclear plant to structure failures, causes, consequences, and fault propagation, which are used to support plant operation. (author)

Risk Management in Csr Unit of Shams Hospital Using FMEA Technique -Tabriz

Directory of Open Access Journals (Sweden)

Mohammad Saadati

2015-08-01

Full Text Available Background and Objectives : Since one of the effective ways to prevent infections is the proper sterilization of instruments, CSR is one of the most important units in hospitals. Thus, risk management has a high priority in CSR. The aim of this study was to identify and prevent potential risks in CSR unit in Shams Hospital using FMEA technique. Material and Methods : This is a descriptive and interventional study. Using FMEA technique, potential risks were identified. Risks were prioritized and corrective interventions were implemented to reduce risks. Results : The current study identified 69 risks that 10 risks were marked as high priority. Corrective activities were suggested by risk management teams which were applied. Conclusion : The results showed that flaws in safety policies, equipment and physical conditions were the most important risk factors. Implementing risk management plan and clear safety policies could be useful. ​

Advancement on safety management system of nuclear power for safety and non-anxiety of society

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu

2004-01-01

Advancement on safety management system is investigated to improve safety and non-anxiety of society for nuclear power, from the standpoint of human machine system research. First, the recent progress of R and D works of human machine interface technologies since 1980 s are reviewed and then the necessity of introducing a new approach to promote technical risk communication activity to foster safety culture in nuclear industries. Finally, a new concept of Offsite Operation and Maintenance Support Center (OMSC) is proposed as the core facility to assemble human resources and their expertise in all organizations of nuclear power, for enhancing safety and non-anxiety of society for nuclear power. (author)

Risk management guide

International Nuclear Information System (INIS)

Briscoe, G.J.

1977-06-01

Risk management requires an assessment or a knowledge of risk. This, in turn, requires identification of hazards (sources of risk) and a determination of risk (evaluation of the hazard degree). The hazard identification and risk analysis techniques presented in this Guide are, in general, based on the MORT concept that accidents result from unwanted energy flow in the absence of adequate controls and/or barriers. This Guide presents an analytical tree designed to prevent oversight of specific energy sources in risk identification. Hazard identification by field personnel is also discussed. Quantitative risk analysis is discussed in the following section. A method for summary of the risks for each energy classification is given. This method uses a graphical log-normal projection so that low probability events, which are not adequately represented in the experience data, are included in the risk assessment. This permits a more acceptable risk assessment since catastrophes are not ignored, even though the actual risk is only approximated. In addition, a few examples of risk analysis of specific hazards are given. Rudimentary probability and fault tree theory are used in these examples. Total risk assessment and resource allocation and safety performance trend analysis are discussed

A Methodological Framework for Software Safety in Safety Critical Computer Systems

OpenAIRE

P. V. Srinivas Acharyulu; P. Seetharamaiah

2012-01-01

Software safety must deal with the principles of safety management, safety engineering and software engineering for developing safety-critical computer systems, with the target of making the system safe, risk-free and fail-safe in addition to provide a clarified differentaition for assessing and evaluating the risk, with the principles of software risk management. Problem statement: Prevailing software quality models, standards were not subsisting in adequately addressing the software safety ...

Integrated risk reduction framework to improve railway hazardous materials transportation safety.

Science.gov (United States)

Liu, Xiang; Saat, M Rapik; Barkan, Christopher P L

2013-09-15

Rail transportation plays a critical role to safely and efficiently transport hazardous materials. A number of strategies have been implemented or are being developed to reduce the risk of hazardous materials release from train accidents. Each of these risk reduction strategies has its safety benefit and corresponding implementation cost. However, the cost effectiveness of the integration of different risk reduction strategies is not well understood. Meanwhile, there has been growing interest in the U.S. rail industry and government to best allocate resources for improving hazardous materials transportation safety. This paper presents an optimization model that considers the combination of two types of risk reduction strategies, broken rail prevention and tank car safety design enhancement. A Pareto-optimality technique is used to maximize risk reduction at a given level of investment. The framework presented in this paper can be adapted to address a broader set of risk reduction strategies and is intended to assist decision makers for local, regional and system-wide risk management of rail hazardous materials transportation. Copyright © 2013 Elsevier B.V. All rights reserved.

Communicating on risk and safety in terms of awareness

International Nuclear Information System (INIS)

Hammar, L.; Andersson, Kjell

1999-01-01

'Safety awareness' is proposed as a possibly constructive concept for the purpose of promoting initiatives in nuclear safety work and gaining improved understanding when communicating on nuclear safety. Safety is thus conceived as resulting essentially from and actually constituting awareness of critical factors in regard of safety. The concept aims specifically at promoting the view of 'safety' as 'awareness of required conditions for being in control of risk'. It aims as well at making clearer sense in calling for constant improvement of safety, according to practice in a safety culture. This proposed view would be expected to lead to applying the usual types of safety criteria but offers the merit of attracting due attention to 'awareness goals' in process oriented safety management which are fundamental to maintaining and improving safety. Applications are discussed in regard of communicating on nuclear safety between decision-makers and the general public, developing and maintaining safety culture, integrating specialist expert contributions in over-all safety assessment, setting safety goals and using safety indicators

Improved safety culture and labor-management relations attributed to changing at-risk behavior process at Union Pacific.

Science.gov (United States)

2009-09-01

Changing At-Risk Behavior (CAB) is a safety process that is being conducted at Union Pacifics San Antonio Service Unit (SASU) with the aim of improving road and yard safety. CAB is an example of a proactive safety risk-reduction method called Clea...

Medical device risk management and its economic impact

Directory of Open Access Journals (Sweden)

Katerina Krsteva Jakimovska

2013-10-01

Full Text Available The importance of medical devices in everyday users/patients lives is imensse. This is the reason why emphasis must be put on safety during their use. Satisfactory safety level can be achived by implementation of quality and risk management standards. Medical device manufacturers must learn to deal with the potential risks by using theoretical and practical examples and measures in order to protect their users/patients and themselves from suffering huge losses arising from adverse events or recall of their products. The best moment for implementation of risk management methods and analysis begins from the device design and development through manufacturing, sales and distribution. These way medical device manufacturers will succseed in protecting their users/patients from serious adverse events and at the same time protect their brand and society status, while minimizing economic losses.

ADA access to passenger vessels : finding safety equivalence solutions for weathertight doors with coamings : Phase 2 : a risk management approach to reconfiguration design solutions

Science.gov (United States)

2005-03-01

This report examines a risk management methodology to provide for both marine safety and disability access at weathertight doors into passenger accommodation spaces on U.S. passenger vessels. The Architectural and Transportation Barriers Compliance B...

[Road map for health and safety management systems in healthcare facilities, according to the OHSAS 18001:2007 standard].

Science.gov (United States)

Pugliese, F; Albini, E; Serio, O; Apostoli, P

2011-01-01

The 81/2008 Act has defined a model of a health and safety management system that can contribute to prevent the occupational health and safety risks. We have developed the structure of a health and safety management system model and the necessary tools for its implementation in health care facilities. The realization of a model is structured in various phases: initial review, safety policy, planning, implementation, monitoring, management review and continuous improvement. Such a model, in continuous evolution, is based on the responsibilities of the different corporate characters and on an accurate analysis of risks and involved norms.

Online application of a risk management system for risk assessment and monitoring at NPPs

Energy Technology Data Exchange (ETDEWEB)

Yang, Jun, E-mail: youngjun51@hotmail.com [Key Laboratory of Fundamental Science on Nuclear Safety and Simulation Technology, Harbin Engineering University (China); Yang, Ming, E-mail: yangming@hrbeu.edu.cn [Key Laboratory of Fundamental Science on Nuclear Safety and Simulation Technology, Harbin Engineering University (China); Wang, Wenlin, E-mail: wlwang0618@126.com [Key Laboratory of Fundamental Science on Nuclear Safety and Simulation Technology, Harbin Engineering University (China); Li, Fengjun, E-mail: leefengjun@163.com [China Nuclear Power Engineering Co. Ltd (China)

2016-08-15

Highlights: • A generic GO-FLOW modeling structure is proposed for easily Living PSA development and analysis. • Hierarchical and modularized scheme is applied in the development of Living PSA models and database. • A risk management system is developed by GO-FLOW method. • Functional testing is conducted on the risk management system for performance evaluation. • The fast solution time derived from Living PSA application is supportive in plant safety management. - Abstract: The paper presents a risk management system on the basis of Living PSA models which are developed under a proposed generic GO-FLOW modeling method with a hierarchical and modular structure. The design of the risk management system is aiming at assisting plant personnel to manage maintenance plan and system configuration, and conduct system reliability monitoring, risk monitoring and risk management quickly and conveniently through graphical user interfaces without going deep into the details of building, updating and analyzing reliability and risk models. The performance of the proposed risk management system was tested on a full-scale simulator of PWR nuclear power plant and demonstrated that the fast solution time derived from utilization of hierarchical and modularized Living PSA models is strongly supportive for instantaneous risk assessment as well as for daily risk management at NPPs.

Managing nuclear safety at Point Lepreau

Energy Technology Data Exchange (ETDEWEB)

Paciga, J [New Brunswick Power, Point Lepreau NGS, PQ (Canada)

1997-12-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance).

Managing nuclear safety at Point Lepreau

International Nuclear Information System (INIS)

Paciga, J.

1997-01-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance)

Integrated Safety, Environmental and Emergency Management System (ISEEMS)