WorldWideScience

Sample records for safety regulation electronic

  1. Nuclear safety and regulation

    International Nuclear Information System (INIS)

    Kim, Hho Jung

    2000-03-01

    This book contains 12 chapters, which are atom and radiation, nuclear reactor and kinds of nuclear power plant, safeguard actuation system and stability evaluation for rock foundation of nuclear power plant, nuclear safety and principle, safety analysis and classification of incident, probabilistic safety assessment and major incident, nuclear safety regulation, system of nuclear safety regulation, main function and subject of safety regulation in nuclear facilities, regulation of fuel cycle and a nuclear dump site, protection of radiation and, safety supervision and, safety supervision and measurement of environmental radioactivity.

  2. Nuclear safety regulations

    International Nuclear Information System (INIS)

    1998-01-01

    The Departmental Rules and The Safety Guides were issued by the NNSA in 1998. The NNSA performed the activities of propagation and implementation of nuclear safety regulations at QTNPP in order to improve the nuclear safety culture of operating organization and construct and contract organizations

  3. Nuclear Safety Regulations

    International Nuclear Information System (INIS)

    Novosel, N.; Prah, M.

    2008-01-01

    Beside new Ordinance on the control of nuclear material and special equipment ('Official Gazette' No. 15/08), from 2006 State Office for Nuclear Safety (SONS) adopted Ordinance on performing nuclear activities ('Official Gazette' No. 74/06) and Ordinance on special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety ('Official Gazette' No. 74/06), based on Nuclear Safety Act ('Official Gazette' No. 173/03). The Ordinance on performing nuclear activities regulates the procedure of notification of the intent to perform nuclear activities, submitting the application for the issue of a licence to perform nuclear activities, and the procedure for issuing decisions on granting a licence to perform a nuclear activity. The Ordinance also regulates the content of the forms for notification of the intent to perform nuclear activities, as well as of the application for the issue of a licence to perform the nuclear activity and the method of keeping the register of nuclear activities. According to the Nuclear Safety Act, nuclear activities are the production, processing, use, storage, disposal, transport, import, export, possession or other handling of nuclear material or specified equipment. The Ordinance on special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety regulates these mentioned conditions, whereas compliance is established by a decision passed by the SONS. Special requirements which expert organizations must fulfil in order to perform certain activities in the field of nuclear safety are organizational, technical, technological conditions and established system of quality assurance. In 2007, State Office for Nuclear Safety finalized the text of new Ordinance on conditions for nuclear safety and protection with regard to the siting, design, construction, use and decommissioning of a facility in which a nuclear activity is

  4. Safety supervision on high-pressure gas regulations

    International Nuclear Information System (INIS)

    Lee, Won Il

    1991-01-01

    The first part lists the regulation on safety supervision of high-pressure gas, enforcement ordinance on high-pressure gas safety supervision and enforcement regulations about high-pressure gas safety supervision. The second part indicates safety regulations on liquefied petroleum gas and business, enforcement ordinance of safety on liquefied petroleum gas and business, enforcement regulation of safety supervision over liquefied petroleum gas and business. The third part lists regulation on gas business, enforcement ordinance and enforcement regulations on gas business. Each part has theory and explanation for questions.

  5. Development of French technical safety regulations: safety fundamental rules

    International Nuclear Information System (INIS)

    Lebouleux, P.

    1982-09-01

    The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operations of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation pratice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. The RFS program is described. A RFS -or a letter- can also give the result of the examination of the constructor and operator code (RCC) by safety authorities

  6. Development of French technical safety regulations: safety fundamental rules

    International Nuclear Information System (INIS)

    Lebouleux, P.

    1983-01-01

    The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operating of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridicial sense; they are called Regles Fondamentales de Surete (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. The RFS program is described. A RFS - or a letter - can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

  7. Nuclear regulation and safety

    International Nuclear Information System (INIS)

    Hendrie, J.M.

    1982-01-01

    Nuclear regulation and safety are discussed from the standpoint of a hypothetical country that is in the process of introducing a nuclear power industry and setting up a regulatory system. The national policy is assumed to be in favor of nuclear power. The regulators will have responsibility for economic, reliable electric production as well as for safety. Reactor safety is divided into three parts: shut it down, keep it covered, take out the afterheat. Emergency plans also have to be provided. Ways of keeping the core covered with water are discussed

  8. New Nuclear Safety Regulations

    International Nuclear Information System (INIS)

    Novosel, N.; Prah, M.; Cizmek, A.

    2008-01-01

    Beside new Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08), from 2006 State Office for Nuclear Safety (SONS) adopted Ordinance on performing nuclear activities (Official Gazette No. 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (Official Gazette No. 74/06), based on Nuclear Safety Act (Official Gazette No. 173/03). The Ordinance on performing nuclear activities regulates the procedure of announcing the intention to perform nuclear activity, submitting an application for the issue of a license to perform nuclear activity, and the procedure for adoption a decision on issuing a nuclear activity license. The Ordinance also regulates the contents of the application form for the announcement of the intention to perform nuclear activity, as well as of the application for the issue of a nuclear activity license and the method of keeping a nuclear activity register. The Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety regulates these mentioned conditions, whereas compliance is established by a decision passed by the SONS. Special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety are organizational, technical, technological conditions and established system of quality assurance. In 2007, SONS finalized the text of new Ordinance on nuclear safety and protection conditions for location, design, construction, operation and decommissioning of facility in which nuclear activity is performed. This Ordinance regulates nuclear safety and protection conditions for location, design, construction, operation and decommissioning of facility in which nuclear activity is performed. This Ordinance defines facilities in which nuclear activity is

  9. 75 FR 4305 - Regulatory Guidance Concerning the Applicability of the Federal Motor Carrier Safety Regulations...

    Science.gov (United States)

    2010-01-27

    ... review of, or preparation and transmission of, typed messages via wireless phones. Because of the safety... Secretary broad power in carrying out motor carrier safety statutes and regulations to ``prescribe.... Handheld or other wireless electronic devices that are brought into a CMV are considered ``additional...

  10. Radiation safety of gamma and electron irradiation facilities

    International Nuclear Information System (INIS)

    1992-01-01

    There are currently some 160 gamma irradiation facilities and over 600 electron beam facilities in operation throughout virtually all Member States of the IAEA. The most widespread uses of these facilities are for the sterilization of medical and pharmaceutical products, the preservation of foodstuffs, polymer synthesis and modification, and the eradication of insect infestation. The safety record of this industry has been very good. Nevertheless, there is a potential for accidents with serious consequences. Gamma and electron beam facilities produce very high dose rates during irradiation, so that a person accidentally present in the irradiation chamber can receive a lethal dose within minutes or seconds. Precautions against uncontrolled entry must therefore be taken. Furthermore, gamma irradiation facilities contain large amounts of radioactivity and if the mechanism for retracting the source is damaged, the source may remain exposed, inhibiting direct access to carry out remedial work. Contamination can result from corroded or damaged sources, and decontamination can be very expensive. These aspects clearly indicate the need to achieve a high degree of safety and reliability in the facilities. This can be accomplished by effective quality control together with careful design, manufacture, installation, operation and decommissioning. The guidance in this Safety Series publication is intended for competent authorities responsible for regulating the use of radiation sources as well as the manufacturers, suppliers, installers and users of gamma and electron beam facilities. 20 refs, 6 figs

  11. Discussion about risk-informed regulations on the nuclear safety

    International Nuclear Information System (INIS)

    Gu Yeyi

    2008-01-01

    The article introduces the background and status quo of regulations on the nuclear safety in China, and points out the inadequacies existing with the current regulations. The author explains the risk-informed safety management concerning its development, status quo, and achievements made, in an attempt to make out the trend of improving regulations on the nuclear safety through risk-informed methods. Combining the U.S. development program of establishing risk-informed regulations on the nuclear safety, the author narrates principles and features of the new regulations system, and provides suggestions for the promotion of risk-informed safety management and establishment of risk-informed regulations on the nuclear safety. (author)

  12. An examination of safety reports involving electronic flight bags and portable electronic devices

    Science.gov (United States)

    2014-06-01

    The purpose of this research was to develop a better understanding of safety considerations with the use of Electronic Flight Bags (EFBs) and Portable Electronic Devices (PEDs) by examining safety reports from Aviation Safety Reporting System (ASRS),...

  13. Assessment of safety regulation using an artificial society

    International Nuclear Information System (INIS)

    Furuta, Kazuo; Nagase, Masaya

    2005-01-01

    This study proposes using an artificial society to assess impacts of safety regulation on the society. The artificial society used in this study is a multi-agent system, which consists of many agents representing companies. The agents cannot survive unless they get profits by producing some products. Safety regulation functions as the business environment, which the agents will evolve to fit to. We modeled this process of survival and adaptation by the genetic algorithm. Using the proposed model, case simulations were performed to compare various regulation styles, and some interesting insights were obtained how regulation style influences behavior of the agents and then productivity and safety level of the industry. In conclusion, an effective method for assessment of safety regulation has been developed, and then several insights were shown in this study

  14. 49 CFR 176.4 - Port security and safety regulations.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Port security and safety regulations. 176.4... SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS CARRIAGE BY VESSEL General § 176.4 Port security and safety regulations. (a) Each carrier, master, agent, and charterer of a...

  15. Safety regulation on high-pressure gas and gas business

    International Nuclear Information System (INIS)

    Kim, Du Yeoung; An, Dae Jun

    1978-09-01

    This book is divided into two parts. The first part introduces safety regulation on high-pressure gas, enforcement ordinance on safety regulation about high-pressure gas and enforcement regulation on safety regulation about high-pressure gas. The second part indicates regulations on gas business such as general rules, gas business gas supplies, using land, supervision, supple mentary rules and penalty. It has two appendixes on expected questions and questions during last years.

  16. Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

    International Nuclear Information System (INIS)

    Tyrer, M.J.

    2002-01-01

    This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

  17. Toward introduction of risk informed safety regulation. Nuclear Safety Commission taskforce's interim report

    International Nuclear Information System (INIS)

    2006-01-01

    Nuclear Safety Commission's taskforce on 'Introduction of Safety Regulation Utilizing Risk Information' completed the interim report on its future subjects and directions in December 2005. Although current safety regulatory activities have been based on deterministic approach, this report shows the risk informed approach is expected to be very useful for making nuclear safety regulation and assurance activities reasonable and also for appropriate allocation of regulatory resources. For introduction of risk informed regulation, it also recommends pileups of experiences with gradual introduction and trial of the risk informed approach, improvement of plant maintenance rules and regulatory requirements utilizing risk information, and establishment of framework to assure quality of risk evaluation. (T. Tanaka)

  18. Clinical Trial Electronic Portals for Expedited Safety Reporting: Recommendations from the Clinical Trials Transformation Initiative Investigational New Drug Safety Advancement Project.

    Science.gov (United States)

    Perez, Raymond P; Finnigan, Shanda; Patel, Krupa; Whitney, Shanell; Forrest, Annemarie

    2016-12-15

    Use of electronic clinical trial portals has increased in recent years to assist with sponsor-investigator communication, safety reporting, and clinical trial management. Electronic portals can help reduce time and costs associated with processing paperwork and add security measures; however, there is a lack of information on clinical trial investigative staff's perceived challenges and benefits of using portals. The Clinical Trials Transformation Initiative (CTTI) sought to (1) identify challenges to investigator receipt and management of investigational new drug (IND) safety reports at oncologic investigative sites and coordinating centers and (2) facilitate adoption of best practices for communicating and managing IND safety reports using electronic portals. CTTI, a public-private partnership to improve the conduct of clinical trials, distributed surveys and conducted interviews in an opinion-gathering effort to record investigator and research staff views on electronic portals in the context of the new safety reporting requirements described in the US Food and Drug Administration's final rule (Code of Federal Regulations Title 21 Section 312). The project focused on receipt, management, and review of safety reports as opposed to the reporting of adverse events. The top challenge investigators and staff identified in using individual sponsor portals was remembering several complex individual passwords to access each site. Also, certain tasks are time-consuming (eg, downloading reports) due to slow sites or difficulties associated with particular operating systems or software. To improve user experiences, respondents suggested that portals function independently of browsers and operating systems, have intuitive interfaces with easy navigation, and incorporate additional features that would allow users to filter, search, and batch safety reports. Results indicate that an ideal system for sharing expedited IND safety information is through a central portal used by

  19. Fire safety regulations and licensing

    International Nuclear Information System (INIS)

    Berg, H.P.

    1998-01-01

    Experience of the past tow decades of nuclear power plant operation and results obtained from modern analytical techniques confirm that fires may be a real threat to nuclear safety and should receive adequate attention from the design phase throughout the life of the plant. Fire events, in particular influence significantly plant safety due to the fact that fires have the potential to simultaneously damage components of redundant safety-related equipment. Hence, the importance of fire protection for the overall safety of a nuclear power plant has to be reflected by the fire safety regulations and to be checked during the licensing process of a plant as well as during the continuous supervision of the operating plant

  20. Improving the rationality of nuclear safety regulations

    International Nuclear Information System (INIS)

    Choi, Byung Sun; Choi, Y. G.; Mun, G. H.

    2005-03-01

    This study focuses on human nature and institutions around the risk management in Korean Nuclear Installations. Nuclear safety regulatory system in Korea has had a tendency to overvalue the technical or engineering areas. But just like other risk management system, the knowledge of social science is also required to design more valid safety regulatory system. As a result of analysis, this study suggest that performance regulation need to be introduced to current nuclear safety regulation system. In this advanced regulatory system, each nuclear generation unit have to be evaluated by performance of its own regulatory implementation and would be treated differently by the performance. Additionally, self-regulation could be very effective was to guarantee nuclear safety. Because KHNP could be judged to have an considerable capabilities to manage its own regulatory procedures. To make self-regulatory system established successfully, it is also important to arrange the appropriate incentive and compensate structures

  1. Electronics and data processing for safety

    International Nuclear Information System (INIS)

    1995-01-01

    Industrial installations, and in particular installations involving risk, are more and more monitored and controlled by computerized systems. The use of such systems raises questions about their contribution to the installation safety and about the qualities required in these systems to avoid additional risk. The February 1995 Electronics Days were organized by the CEA-LETI Department of Electronics and Nuclear Instrumentation to try to answer these questions. Four sessions were organized on the following topics: computerized systems and functioning safety, components and architectures, softwares and norms, and tools and methods. Only the communications dealing with the safety of computerized systems and components involved in nuclear applications have been retained (17 over 36). (J.S.)

  2. Economic consideration of nuclear safety and cost benefit analysis in nuclear safety regulation

    International Nuclear Information System (INIS)

    Choi, Y. S.; Choi, K. S.; Choi, K. W.; Song, I. J.; Park, D. K.

    2001-01-01

    For the optimization of nuclear safety regulation, understanding of economic aspects of it becomes increasingly important together with the technical approach used so far to secure nuclear safety. Relevant economic theories on private and public goods were reviewed to re-illuminate nuclear safety from the economic perspective. The characteristics of nuclear safety as a public good was reviewed and discussed in comparison with the car safety as a private safety good. It was shown that the change of social welfare resulted from the policy change induced can be calculated by the summation of compensating variation(CV) of individuals. It was shown that the value of nuclear safety could be determined in monetary term by this approach. The theoretical background and history of cost benefit analysis of nuclear safety regulation were presented and topics for future study were suggested

  3. Concepts and techniques: Active electronics and computers in safety-critical accelerator operation

    International Nuclear Information System (INIS)

    Frankel, R.S.

    1995-01-01

    The Relativistic Heavy Ion Collider (RHIC) under construction at Brookhaven National Laboratory, requires an extensive Access Control System to protect personnel from Radiation, Oxygen Deficiency and Electrical hazards. In addition, the complicated nature of operation of the Collider as part of a complex of other Accelerators necessitates the use of active electronic measurement circuitry to ensure compliance with established Operational Safety Limits. Solutions were devised which permit the use of modern computer and interconnections technology for Safety-Critical applications, while preserving and enhancing, tried and proven protection methods. In addition a set of Guidelines, regarding required performance for Accelerator Safety Systems and a Handbook of design criteria and rules were developed to assist future system designers and to provide a framework for internal review and regulation

  4. Concepts and techniques: Active electronics and computers in safety-critical accelerator operation

    Energy Technology Data Exchange (ETDEWEB)

    Frankel, R.S.

    1995-12-31

    The Relativistic Heavy Ion Collider (RHIC) under construction at Brookhaven National Laboratory, requires an extensive Access Control System to protect personnel from Radiation, Oxygen Deficiency and Electrical hazards. In addition, the complicated nature of operation of the Collider as part of a complex of other Accelerators necessitates the use of active electronic measurement circuitry to ensure compliance with established Operational Safety Limits. Solutions were devised which permit the use of modern computer and interconnections technology for Safety-Critical applications, while preserving and enhancing, tried and proven protection methods. In addition a set of Guidelines, regarding required performance for Accelerator Safety Systems and a Handbook of design criteria and rules were developed to assist future system designers and to provide a framework for internal review and regulation.

  5. Safety goals and safety culture opening plenary. 2. Safety Regulation Implemented by Gosatomnadzor of Russia

    International Nuclear Information System (INIS)

    Gutsalov, A.T.; Bukrinsky, A.M.

    2001-01-01

    This paper describes principles and approaches used by Gosatomnadzor of Russia in establishing safety goals. The link between safety goals and safety culture is demonstrated. The paper also contains information on nuclear regulatory activities in Russia. Regulatory documents of Gosatomnadzor of Russia do not provide precise definitions of safety goals as IAEA documents INSAG-3 or INSAG-12 do. However, overall activities of Gosatomnadzor of Russia are directed to the achievement of these safety goals, as Gosatomnadzor of Russia is a federal executive authority responsible for the regulation of nuclear and radiation safety in accordance with the Russian Federal Law 'On the Use of Nuclear Energy'. Thus, in the Statement of the Policy of the Russian Regulatory Authority, enacted in 1992, it was established that the overall activities of Gosatomnadzor of Russia are directed to the achievement of the main goal. This goal is to establish conditions that ensure that personnel, the public, and the environment are protected from unacceptable radiation and nonproliferation of nuclear materials. The practical application of such a method as given by the publication of Statements of Policy of Gosatomnadzor of Russia may be considered as a safety culture element. 'General Provisions of NPP Safety Ensuring' (OPB-88/ 97) is a regulatory document of the highest level in the hierarchy of regulatory documents of Gosatomnadzor of Russia. It establishes quantitative values of safety goals as do the foregoing IAEA documents. Thus, this regulatory document sets up the following: 1. The estimated total probability of severe accidents should not exceed 10 5 /reactor.yr. 2. The estimated probability of the worst possible radioactive release to the environment specified in the standards should not exceed 10 -7 /reactor.yr in the case of severe beyond-design-basis accidents. 3. The probability of a reactor vessel failure should not exceed 10 -7 /reactor.yr. The foregoing values are somehow

  6. Radiation Safety (Qualifications) Regulations 1980

    International Nuclear Information System (INIS)

    1980-01-01

    These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

  7. Environmental Regulation and Food Safety: Studies of Protection ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Book cover Environmental Regulation and Food Safety: Studies of Protection and Protectionism. Directeur(s) : Veena Jha. Maison(s) d'édition : Edward Elgar, IDRC. 1 janvier 2006. ISBN : 184542512X. 250 pages. e-ISBN : 155250185X.

  8. The electron accelerator in industry - safety aspects

    International Nuclear Information System (INIS)

    Kirthi, K.N.

    1993-01-01

    Electron beam accelerators are being used in increasing numbers in a variety of important applications. Commercial uses include radiography, food preservation, product sterilisation and radiation processing of materials. Since most of the industrial applications involve products, some that can be treated with electrons and others that require photons, electron accelerators serve this dual purpose economically. Although industrial accelerators are now regarded as standard products, finished installations show considerable diversity, reflecting the users, needs and planning. Because of the high radiation output, proper planning regarding safety is warranted. This paper discusses the hazards, safety and planning required during design and operation of the electron beam accelerators. (author). 4 refs., 1 fig

  9. 48 CFR 245.7311-2 - Safety, security, and fire regulations.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Safety, security, and fire regulations. 245.7311-2 Section 245.7311-2 Federal Acquisition Regulations System DEFENSE ACQUISITION... Inventory 245.7311-2 Safety, security, and fire regulations. ...

  10. Programmable Electronic Safety Systems

    International Nuclear Information System (INIS)

    Parry, R.

    1993-05-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement failsafe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  11. The politics of nuclear safety regulation

    International Nuclear Information System (INIS)

    Adam, G.

    2002-01-01

    The paper discusses political aspects of decision making about the safety of nuclear power plants especially in Eastern Europe and in connection with the enlargement of the European Union. The problem of the Kozloduy NPP safety is also discussed. Recommendations on the policy and tasks for nuclear regulators are given

  12. Regulatory Body Safety Culture in Non-nuclear HROs: Lessons for Nuclear Regulators

    International Nuclear Information System (INIS)

    Fleming, M.; Bowers, K.

    2016-01-01

    Regulator safety culture is a relatively new area of investigation, even though deficiencies in regulatory oversight have been identified in a number of public inquiries (e.g., Piper Alpha, Deep Water Horizon). More recently the IAEA report into the Fukushima disaster specifically identified the need for regulatory bodies to have a positive safety culture. While there are clear parallels between duty holder safety culture and regulator safety culture there are also likely to be differences. To date they have been no published studies investigating regulator safety culture. In order to develop a framework to understand regulator safety culture we conducted a literature review and interviewed safety culture subject matter experts from a range of HRO domains (e.g., offshore oil and gas). There was general consensus among participants that regulatory safety culture was an important topic that was worthy of further investigation. That there was general agreement that regulatory safety culture was multi-dimensional and that some of the elements of existing safety culture models applied to regulator culture (e.g., learning and leadership). The participants also identified unique dimensions of regulator safety culture including commitment to high standards and ethics, transparency and perceived role of the regulator. In this paper we will present the results of the interviews and present a model of regulator safety culture. This model will be contrasted with models being used in the nuclear industry. Implications for assessing regulatory safety culture will be discussed. (author)

  13. The management of electronic documents generated from compilation and revision processes of nuclear and radiation safety regulations and standards

    International Nuclear Information System (INIS)

    Wang Wenhai; Fan Yun; Shang Zhaorong

    2010-01-01

    As the Secretary Group of Regulations and Standards Review Committee on nuclear and radiation safe needs to deal with a large number of electronic documents in course of the regulation and standard review meetings, the article gives a systematical method including electronic document file naming and management as well as procedures of file transfer, storage and usage. (authors)

  14. Development of NPP safety regulation in Russia

    International Nuclear Information System (INIS)

    Vishnevsky, Y.G.; Gutsalov, A.T.; Bukrinsky, A.M.; Gordon, B.G.

    1999-01-01

    The presentation describes the organisation scheme of Russian safety regulatory bodies, their tasks and responsibilities. Legislative and regulatory basis of NPP safety regulations rely on the federal laws: Law on the Use of Nuclear Energy and Law on Radiation Safety of the Population. Role of international cooperation and Improvement of regulatory activities in Russia are emphasised

  15. Programmable electronic safety systems

    International Nuclear Information System (INIS)

    Parry, R.R.

    1993-01-01

    Traditionally safety systems intended for protecting personnel from electrical and radiation hazards at particle accelerator laboratories have made extensive use of electromechanical relays. These systems have the advantage of high reliability and allow the designer to easily implement fail-safe circuits. Relay based systems are also typically simple to design, implement, and test. As systems, such as those presently under development at the Superconducting Super Collider Laboratory (SSCL), increase in size, and the number of monitored points escalates, relay based systems become cumbersome and inadequate. The move toward Programmable Electronic Safety Systems is becoming more widespread and accepted. In developing these systems there are numerous precautions the designer must be concerned with. Designing fail-safe electronic systems with predictable failure states is difficult at best. Redundancy and self-testing are prime examples of features that should be implemented to circumvent and/or detect failures. Programmable systems also require software which is yet another point of failure and a matter of great concern. Therefore the designer must be concerned with both hardware and software failures and build in the means to assure safe operation or shutdown during failures. This paper describes features that should be considered in developing safety systems and describes a system recently installed at the Accelerator Systems String Test (ASST) facility of the SSCL

  16. Safety regulations for radioisotopes, etc. (interim report)

    International Nuclear Information System (INIS)

    1980-01-01

    An (interim) report by an ad hoc expert committee to the Nuclear Safety Commission, on the safety regulations for radioisotopes, etc., was presented. For the utilization of radioisotopes, etc., there is the Law Concerning Prevention of Radiation Injury Due to Radioisotopes, etc. with the advances in this field and the improvement in international standards, the regulations by the law have been examined. After explaining the basic ideas of the regulations, the problems and countermeasures in the current regulations are described: legal system, rationalization in permission procedures and others, inspection on RI management, the system of the persons in charge of radiation handling, RI transport, low-level radioactive wastes, consumer goods, definitions of RIs, radiation and sealed sources, regulations by group partitioning, RI facilities, system of personnel exposure registration, entrusting of inspection, etc. to private firms, and reduction in the works for permission among governmental offices. (author)

  17. Legislation for the countermeasures on special issues of nuclear safety regulations

    International Nuclear Information System (INIS)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul

    2003-02-01

    Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea

  18. Legislation for the countermeasures on special issues of nuclear safety regulations

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

    2003-02-15

    Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea.

  19. On the Regulation of Life Safety Risk

    DEFF Research Database (Denmark)

    Faber, Michael Havbro; Sørensen, John Dalsgaard; Vrouwenvelder, A.C.W.M.

    2015-01-01

    . Starting point is taken in a short outline of what is considered to comprise the present best practice rationale for life safety and health risk regulation. Thereafter, based on selected principal examples from different application areas, inconsistencies in present best practice risk quantification...... absolute level of individual life safety risk subject to assessment of acceptability. It is highlighted that a major cause of inconsistency in risk quantifications and comparisons originates from the fact that present regulations partly address societal activities and partly address applied technologies...

  20. Safety regulations: Implications of the new risk perspectives

    International Nuclear Information System (INIS)

    Aven, T.; Ylönen, M.

    2016-01-01

    The current safety regulations for industrial activities are to a large extent functionally oriented and risk-based (informed), expressing what to achieve rather than the means and solutions needed. They are founded on a probability-based perspective on risk, with the use of risk assessment, risk acceptance criteria and tolerability limits. In recent years several risk researchers have argued for the adoption of some new types of risk perspectives which highlight uncertainties rather than probabilities in the way risk is defined, the point being to better reflect the knowledge, and lack of knowledge, dimension of risk. The Norwegian Petroleum Safety Authority has recently implemented such a perspective. The new ISO standard 31000 is based on a similar thinking. In this paper we discuss the implications of these perspectives on safety regulation, using the oil & gas and nuclear industries as illustrations. Several suggestions for how to develop the current safety regulations in line with the ideas of the new risk perspectives are outlined, including some related to the use of risk acceptance criteria (tolerability limits). We also point to potential obstacles and incentives that the larger societal and institutional setting may impose on industry as regards the adoption of the new risk perspectives. - Highlights: • Some new types of risk perspectives have been promoted. • They have been implemented for example by the Norwegian Petroleum Safety Authority. • The paper studies the implication of these perspectives on the risk regulation. • Suggestions for how to develop the regulations are provided • Obstacles and incentives for the implementation of the perspectives are pointed to.

  1. NEA activities in safety and regulation

    International Nuclear Information System (INIS)

    Stadie, K.B.

    1983-01-01

    The NEA programme on Safety and Regulations is briefly reviewed. It encompasses four main areas - nuclear safety technology; nuclear licensing; radiation protection; and waste management - with three principal objectives: to promote exchanges of technical information in order to enlarge the data base for national decision making; to improve co-ordination of national R and D activities with emphasis on international standard problem exercises, and to promote international projects; to develop common technical, administrative and legal approaches to improve compatibility of safety and regulatory practices

  2. Strategy for public understanding and participation in nuclear safety regulation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. J.; Chung, Yun Hyung

    2004-02-15

    The objective of this study is to help the general public and local residents to better understand and trust nuclear safety regulation. In order to obtain public confidence in nuclear safety regulation, the emotion and demand of public should be first understood and the change in an attitude to meet the present circumstances actively is requisite. Hence it is intended that a genuine communication shall be newly arranged and accomplished on the basis of mutual understanding. To achieve this, a series of public opinion poll have performed periodically and symposium for the public acceptance is held in order to frame a policy based on the understanding of nuclear safety and regulation of the general public and local residents. Besides nuclear safety indicators including safety sentiment indicators are being developed as a means to understand the safety of operating nuclear power plants from the viewpoint of the general public, a plan for the harmonious communication of nuclear safety information is established, and handbooks of nuclear terminologies and report-writing are under development in part. Finally plans for convergence of the public opinions and a wide public involvement in nuclear safety regulation are formulated and their applicability as organization and administration program is now under consideration.

  3. Alternative development and action plan for the atomic safety regulation instruments

    International Nuclear Information System (INIS)

    Kim, J. Y.; Ahn, S. K.; Ham, Y. S.

    2004-01-01

    The goal of this study to provide highly practical model to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency

  4. Development of Comprehensive Nuclear Safety Regulation Plan for 2007-2011

    International Nuclear Information System (INIS)

    Choi, Young Sung; Kim, Woong Sik; Park, Dong Keuk; Kim, Ho Ki

    2006-01-01

    The Article 8-2 of Atomic Energy Act requires the government to establish Atomic Energy Promotion Plan every five years. It sets out national nuclear energy policies in a systematic and consistent way. The plan presents the goals and basic directions of national nuclear energy policies on the basis of current status and prospects. Both areas of utilization and safety management of nuclear energy are included and various projects and schedules are delineated based on the national policy directions. The safety management area in this plan deals with the overall safety and regulation policy. Its detail projects and schedule should be developed in separate plans by responsible ministries under the mediation of the MOST. As a regulatory authority, MOST is responsible for safety management area and its technical support organization, KINS has developed Comprehensive Nuclear Safety Regulation Plan as an implementation plan of safety area. This paper presents the development process and specific projects contained in the Comprehensive Nuclear Safety Regulation Plan which is under development now

  5. 78 FR 11092 - Safety and Health Regulations for Construction

    Science.gov (United States)

    2013-02-15

    ... LABOR DEPARTMENT Occupational Safety and Health Administration 29 CFR Part 1926 Safety and Health Regulations for Construction CFR Correction In Title 29 of the Code of Federal Regulations, Part 1926, revised as of July 1, 2012, on page 225, in Sec. 1926.152, paragraph (c)(16) is added to read as follows: Sec...

  6. Review of Policy Documents for Nuclear Safety and Regulation

    International Nuclear Information System (INIS)

    Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki

    2006-01-01

    The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies

  7. Review of Policy Documents for Nuclear Safety and Regulation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Woong Sik; Choi, Kwang Sik; Choi, Young Sung; Kim, Hho Jung; Kim, Ho Ki [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)

    2006-07-01

    The goal of regulation is to protect public health and safety as well as environment from radiological hazards that may occur as a result of the use of atomic energy. In September 1994, the Korean government issued the Nuclear Safety Policy Statement (NSPS) to establish policy goals of maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It declares the importance of establishing safety culture in nuclear community and also specifies five nuclear regulatory principles (Independence, Openness, Clarity, Efficiency and Reliability) and provides the eleven regulatory policy directions. In 2001, the Nuclear Safety Charter was declared to make the highest goal of safety in driving nuclear business clearer; to encourage atomic energy- related institutions and workers to keep in mind the mission and responsibility for assuring safety; to guarantee public confidence in related organizations. The Ministry of Science and Technology (MOST) also issues Yearly Regulatory Policy Directions at the beginning of every year. Recently, the third Atomic Energy Promotion Plan (2007-2011) has been established. It becomes necessary for the relevant organizations to prepare the detailed plans on such areas as nuclear development, safety management, regulation, etc. This paper introduces a multi-level structure of nuclear safety and regulation policy documents in Korea and presents some improvements necessary for better application of the policies.

  8. Implementation of the new regulation on radiological safety in Peru

    International Nuclear Information System (INIS)

    Medina Gironzini, E.

    1997-01-01

    Since its creation in 1975, the Peruvian Institute of Nuclear Energy (IPEN) has enacted three regulations of national importance on the norms of protection against ionizing radiation. The first regulation, which is called regulation of radiological protection (1980) approved by a resolution of IPEN, is the result of the work of a committee constituted by IPEN and the Ministry of Health. Its implementation caused some problems as result of which, in 1989, a new regulation on radiological protection was enacted through a supreme decree. Taking into account the new recommendation of the International Commission on Radiological Protection and the International Basic Safety Standard for Protection against Ionizing Radiation and for the Safety of Radiation Sources, approved in May 1997, the regulation of radiological safety also considers evolving aspects in the Project ARCAL XVII/IAEA. This regulation includes various topics such as exclusions, requirements of protection (medical exposure, occupational exposure, public exposure, chronic exposure), requirements of source safety, interventions and emergencies, control of sources and practices (exemptions, authorizations, inspections) etc. The implementation of this regulation at the national level falls to IPEN, the unique authority commissioned to control nuclear installations, radioactivity and x ray facilities in medicine, industry and research

  9. Education and Training of Safety Regulation for Nuclear Safety Infrastructure: Its Necessity and Unique Features

    International Nuclear Information System (INIS)

    Choi, Young Sung; Choi, Young Joon; Lee, Jae Cheon

    2009-01-01

    Faced with global warming and electricity demands, countries over the world recognize the comparative advantages of nuclear energy. It is estimated that about 300 nuclear power plants (NPPs) expect to be constructed until 2030 worldwide. In addition, according to the IAEA, approximately 20 new countries might have their first NPP in operation by 2030 in the high projection compared with bout 5 new countries in the low projection. When introducing nuclear power, the implementation of an appropriate infrastructure to address all of the relevant issues is a central concern of international community. In particular, nuclear power program requires, at an earlier stage than when construction starts, the development of a legal and regulatory framework and training of regulators and safety experts whose combined knowledge adequately covers all areas of nuclear safety and regulation applied at a NPP construction and operation. As an essential component of such human resource development, special attention was paid to the provision of education and training to regulators of which countries plan to introduce NPPs. In term of education theory, safety regulation has some unique features in learning and teaching, which are different from those of nuclear engineering or development. This paper overviews nuclear safety infrastructure, explores the roles of exporting countries, and presents features and components in education of nuclear safety regulation

  10. Legislation for the countermeasures on special issues of nuclear safety regulations

    International Nuclear Information System (INIS)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul

    2004-02-01

    Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation

  11. Legislation for the countermeasures on special issues of nuclear safety regulations

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chun; Kim, Heon Jin; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

    2004-02-15

    Since the present nuclear safety regulation has some legal problems that refer to special issues and contents of regulatory provisions, this report has preformed research on the legal basic theory of nuclear safety regulation to solve the problems. In addition, this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation.

  12. Survey of electronic safety systems in accelerator applications

    International Nuclear Information System (INIS)

    Mahoney, K.

    1997-01-01

    This paper presents the preliminary results and analysis of a comprehensive survey of the implementation of accelerator safety interlock systems from over 30 international labs. At the present time there is not a self consistent means to evaluate both the experiences and level of protection provided by electronic safety interlock systems. This research is intended to analyze the strength and weaknesses of several different types of interlock system implementation methodologies. Research, medical, and industrial accelerators are compared. Thomas Jefferson National Accelerator Facility (TJNAF) was one of the first large particle accelerators to implement a safety interlock system using programmable logic controllers. Since that time all of the major new U.S. accelerator construction projects plan to use some form of programmable electronics as part of a safety interlock system in some capacity

  13. Leadership for Safety in Practice: Perspectives from a Nuclear Regulator

    International Nuclear Information System (INIS)

    Tyobeka, B. M.

    2016-01-01

    The principal responsibility for a nuclear regulator is to assure compliance with regulations and safety standards by operators. One of these requirements is demonstration of, and adherence to, nuclear safety culture by the operators. At the same time, the regulators themselves are expected to live the talk and practice what they preach, i.e., demonstrate highest levels of nuclear safety culture within their organizations. Consequently, it is recognised that leadership is important in the creation of a culture that supports and promotes a strong nuclear safety performance of an organization. The leaders of a regulatory body are vital in inspiring employees to a higher level of safety and productivity, which means that they must apply good leadership attributes on a daily basis. This paper will attempt to bring forth and share attributes for strong leadership role in promoting a safety culture within a nuclear regulatory body by surveying world-wide practices and examples in developing and advanced nuclear countries. (author)

  14. Improving the regulation of safety at DOE nuclear facilities. Final report

    International Nuclear Information System (INIS)

    1995-12-01

    The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by DOE itself. The three major recommendations are: under any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

  15. Nuclear safety: risks and regulation

    International Nuclear Information System (INIS)

    Wood, W.C.

    1983-01-01

    Taking a fresh look at nuclear safety regulations, this study finds that the mandate and organization of the Nuclear Regulatory Commission (NRC) militate against its making sound decisions. The author criticizes failures to make hard decisions on societal risk, to clarify responsibility, and to implement cost-effective safety measures. Among his recommendations are reorganization of the NRC under a single authoritative administrator, separation of technical issues from social ones, and reform of the Price-Anderson Act. The author concludes that the worst eventuality would be to continue the current state of indecision. 161 references, 6 figures, 4 tables

  16. Domestic Regulation for Periodic Safety Review of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Daesik; Ahn, Seunghoon; Auh, Geunsun; Lee, Jonghyeok

    2015-01-01

    The so-called Periodic Safety Review (PSR) has been carried out such safety assessment throughout its life, on a periodic basis. In January 2001, the Atomic Energy Act and related regulations were amended to adopt the PSR institutional scheme from IAEA Nuclear Safety Guide 50-SG-O12. At that time the safety assessment was made to review the plant safety on 10 safety factors, such as aging management and emergency planning, where the safety factor indicates the important aspects of safety of an operating NPP to be addressed in the PSR. According to this legislation, the domestic utility, the KHNP has conducted the PSR for the operating NPP of 10 years coming up from operating license date, starting since May 2000. Some revisions in the PSR rule were made to include the additional safety factors last year. This paper introduces the current status of the PSR review and regulation, in particular new safety factors and updated technical regulation. Comprehensive safety assessment for Korea Nuclear Power Plants have performed a reflecting design and procedure changes and considering the latest technology every 10 years. This paper also examined the PSR system changes in Korea. As of July 2015, reviews for PSR of 18 units have been completed, with 229 nuclear safety improvement items. And implementation have been completed for 165 of them. PSR system has been confirmed that it has contributed to improvement of plant safety. In addition, this paper examined the PSR system change in Korea

  17. Electronic nicotine delivery systems ("e-cigarettes"): review of safety and smoking cessation efficacy.

    Science.gov (United States)

    Harrell, Paul Truman; Simmons, Vani Nath; Correa, John Bernard; Padhya, Tapan Ashvin; Brandon, Thomas Henry

    2014-09-01

    Cigarette smoking is common among cancer patients and is associated with negative outcomes. Electronic nicotine delivery systems ("e-cigarettes") are rapidly growing in popularity and use, but there is limited information on their safety or effectiveness in helping individuals quit smoking. The authors searched PubMed, Web of Science, and additional sources for published empirical data on safety and use of electronic cigarettes as an aid to quit smoking. We conducted a structured search of the current literature up to and including November 2013. E-cigarettes currently vary widely in their contents and are sometimes inconsistent with labeling. Compared to tobacco cigarettes, available evidence suggests that e-cigarettes are often substantially lower in toxic content, cytotoxicity, associated adverse effects, and secondhand toxicity exposure. Data on the use of e-cigarettes for quitting smoking are suggestive but ultimately inconclusive. Clinicians are advised to be aware that the use of e-cigarettes, especially among cigarette smokers, is growing rapidly. These devices are unregulated, of unknown safety, and of uncertain benefit in quitting smoking. In the absence of further data or regulation, oncologists are advised to discuss the known and unknown safety and efficacy information on e-cigarettes with interested patients and to encourage patients to first try FDA-approved pharmacotherapies for smoking cessation. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2014.

  18. R and D perspectives on the advanced nuclear safety regulation system

    International Nuclear Information System (INIS)

    Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook; Han, Sang Hoon; Lee, Jung Won

    2009-01-01

    As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea

  19. R and D perspectives on the advanced nuclear safety regulation system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Ju; Ahn, Sang Kyu; Park, Jong Seuk; Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Han, Sang Hoon; Lee, Jung Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-04-15

    As current licensing process is much desired to be optimized both plant safety and regulatory efficiency, an advanced safety regulation such as risk informed regulation has been come out. Also, there is a need to have a future oriented safety regulation since a lot of new reactors are conceptualized. Keeping pace with these needs, since early 2007, Korean government has launched a new project for preparing an advanced and future oriented nuclear safety regulation system. In order to get practical achievements, the project team sets up such specific research objectives for the development of: implementation program for graded regulation using risk and performance information; multi purpose PSA models for regulatory uses; a technology neutral regulatory framework for future innovative reactors; evaluation procedure of proliferation resistance; and, performance based fire hazard analysis method and evaluation system. This paper introduces major R and D outputs of this project, and provides some perspectives for achieving effectiveness and efficiency of the nuclear regulation system in Korea.

  20. 78 FR 66251 - Electronic Fund Transfers(Regulation E)

    Science.gov (United States)

    2013-11-05

    ... Electronic Fund Transfers (Regulation E) AGENCY: Bureau of Consumer Financial Protection. ACTION: Notice of... subpart B of Regulation E, which implements the Electronic Fund Transfer Act, and published this list on...-rule-amendment-to-regulation-e/ . SUPPLEMENTARY INFORMATION: The Bureau published its remittance rule...

  1. Radiation Safety of Accelerator Facility with Regard to Regulation

    International Nuclear Information System (INIS)

    Dedi Sunaryadi; Gloria Doloresa

    2003-01-01

    The radiation safety of accelerator facility and the status of the facilities according to licensee in Indonesia as well as lesson learned from the accidents are described. The atomic energy Act No. 10 of 1997 enacted by the Government of Indonesia which is implemented in Radiation Safety Government Regulation No. 63 and 64 as well as practice-specific model regulation for licensing request are discussed. (author)

  2. Legal principles of regulatory administration and nuclear safety regulation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyeong Hui; Cheong, Sang Kee [Hannam Univ., Taejon (Korea, Republic of)

    2000-12-15

    This research presents a critical analysis and evaluation of principles of administrative laws in order to provide framework of structural reform on the nuclear safety regulation system. The focus of this analysis and evaluation is centered around the area of origin of regulatory administrative laws; authorities of regulation; procedures of regulatory actions; regulatory enforcement; and administrative relief system. In chapter 2 the concept of regulatory administration is analysed. Chapter 3 identifies the origin of regulatory administration and the principles of administration laws. It also examines legal nature of the nuclear safety standard. In relation to regulatory authorities. Chapter 4 identifies role and responsibility of administration authorities and institutions. It also examines fundamental principles of delegation of power. Then the chapter discusses the nuclear safety regulation authorities and their roles and responsibilities. Chapter 5 classifies and examines regulatory administration actions. Chapter 6 evaluates enforcement measure for effectiveness of regulation. Finally, chapter 7 discusses the administrative relief system for reviewing unreasonable regulatory acts.

  3. Review of safety reports involving electronic flight bags

    Science.gov (United States)

    2009-04-27

    Electronic Flight Bags (EFBs) are a relatively new device used by pilots. Even so, 37 safety-related events involving EFBs were identified from the public online Aviation Safety Reporting System (ASRS) database as of June 2008. In addition, two accid...

  4. Offshore regulators focus on incentives for safety

    Energy Technology Data Exchange (ETDEWEB)

    Reid, W.

    2000-11-27

    Strict safety regulations in effect at offshore drilling sites are discussed. The guiding principle in all existing regulation is that while economic or industrial considerations are important, the value and the concern for human life is paramount. Should some tragic event occur at an offshore drilling site that is shown to have been caused by negligence of an operator, there is no question at all that the regulatory authority, in this case the Canada-Newfoundland Offshore Petroleum Board (CNOPB), would take the negligent operator to court. Nevertheless, Canadian authorities remain confident that encouragement of maintaining a safe working environment is likely to be more successful in ensuring workplace safety than threats of punishment. Indeed, Canadian regulators have, in recent times, shown a tendency to move towards performance-based systems, as opposed to the more usual prescriptive or rule-bound regulatory regime. This new approach involves setting targets and giving companies the responsibility to implement measures to reach the targets rather than relying on government instructions. Still, performance-based regulation in Canada is relatively new and some regulations remain prescriptive. Examples are the requirement for two immersion suits and two lifeboat seats for every worker on a drilling unit.

  5. Safety Aspects of EPS-3000 Electron Beam Machine

    International Nuclear Information System (INIS)

    Siti Aiasah Hashim; Shari Jahar; Ayub Muhamad; Sarada Idris

    2011-01-01

    The EPS-3000 electron beam machine was installed and commission in 1991 at the Alurtron Electron Beam Irradiation Centre. It is utilized as a tool to enhance finished products through electron beam irradiation. The machine and its auxiliary systems were built with highest safety in mind due to the possible dangers that it can cause during the irradiation activities. Automatic stops may be activated via various interlocks to protect the integrity of the machine. This type of interlocks are controlled by the set upper and lower limits, mostly related to the machine high voltage (and beam) generation and cooling systems. Radiation safety is also taken care of by provision of shielding and area monitoring. Other potential hazards include ozone poisoning and electromagnetic field (EMF) could be generated by the high voltage. This paper describes the safety and security systems installed within the facility as measures to protect the workers and general public from radiation and other physical threats. (author)

  6. Safety culture in nuclear installations - The role of the regulator

    International Nuclear Information System (INIS)

    Karigi, Alice W.

    2002-01-01

    Safety culture is an amalgamation of values, standards, morals and norms of acceptable behavior by the licensees, Radiation workers and the Regulator. The role played by a Regulator in establishing safety culture in a nuclear installation is that related to Authorization, review, assessment, inspection and enforcement. The regulator is to follow the development of a facility or activity from initial selection of the site through design, construction, commissioning, radioactive waste management through to decommissioning and closure. He is to ensure safety measures are followed through out the operation of the facility by laying down in the license conditions of controlling construction of nuclear installations and ensuring competence of the operators. (author)

  7. Safety evaluations required in the safety regulations for Monju and the validity confirmation of safety evaluation methods

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The purposes of this study are to perform the safety evaluations of the fast breeder reactor 'Monju' and to confirm the validity of the safety evaluation methods. In JFY 2012, the following results were obtained. As for the development of safety evaluation methods needed in the safety examination achieved for the reactor establishment permission, development of the analysis codes, such as a core damage analysis code, were carried out according to the plan. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

  8. Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE`s nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation.

  9. Improving the regulation of safety at DOE nuclear facilities. Final report: Appendices

    International Nuclear Information System (INIS)

    1995-12-01

    The report strongly recommends that, with the end of the Cold War, safety and health at DOE facilities should be regulated by outside agencies rather than by any regulatory scheme, DOE must maintain a strong internal safety management system; essentially all aspects of safety at DOE's nuclear facilities should be externally regulated; and existing agencies rather than a new one should be responsible for external regulation

  10. Radiation Safety (General) Regulations 1983 (Western Australia)

    International Nuclear Information System (INIS)

    1983-01-01

    The provisions of the Regulations cover, inter alia, the general precautions and requirements relating to radiation safety of the public and radiation workers and registration of irradiating apparatus or premises on which such apparatus is operated. In addition, the Regulations set forth requirements for the operation of such apparatus and for the premises involved. (NEA) [fr

  11. Impact of Construction Health & Safety Regulations on Project ...

    African Journals Online (AJOL)

    Impact of Construction Health & Safety Regulations on Project Parameters in Nigeria: Consultants and Contractors View. ... The study recommends that better attention is given to health and safety should as a project parameter and that related practice notes and guidelines should be evolved for all project stakeholders.

  12. International Safety Regulation and Standards for Space Travel and Commerce

    Science.gov (United States)

    Pelton, J. N.; Jakhu, R.

    The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

  13. United States import safety, environmental health, and food safety regulation in China.

    Science.gov (United States)

    Nyambok, Edward O; Kastner, Justin J

    2012-01-01

    China boasts a rapidly growing economy and is a leading food exporter. Since China has dominated world export markets in food, electronics, and toys, many safety concerns about Chinese exports have emerged. For example, many countries have had problems with Chinese food products and food-processing ingredients. Factors behind food safety and environmental health problems in China include poor industrial waste management, the use of counterfeit agricultural inputs, inadequate training of farmers on good farm management practices, and weak food safety laws and poor enforcement. In the face of rising import safety problems, the U.S. is now requiring certification of products and foreign importers, pursuing providing incentives to importers who uphold good safety practices, and considering publicizing the names of certified importers.

  14. Radiation safety aspects of new X-ray free electron laser facility, SACLA

    International Nuclear Information System (INIS)

    Asano, Yoshihiro

    2013-01-01

    In the safety point of view, X-ray free electron laser facilities have some characteristics in comparison with 3 rd generation synchrotron radiation facilities. One is that the high energy electrons are always injected into the beam dump and the beamlines must be constructed in the direction of the movements of electrons, and another is that the total number of accelerated electrons of X-ray free electron laser facilities is much larger than that of synchrotron radiation facilities. In addition to the importance of safety interlock systems, therefore, it is important that high energy electrons never invade into X-ray free electron laser beamlines and the amount of accelerated electron beam losses must be reduced as much as possible. At SACLA, a safety permanent magnet was installed into the X-ray light beam axis, and a beam halo monitor and beam loss monitors were installed within and around the electron transport pipes, respectively. In comparison with the SPring-8 synchrotron radiation facility, shielding design of SACLA, outline of the radiation safety systems including the monitors will be presented

  15. Assessment of policy issues in nuclear safety regulation according to circumstantial changes

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Lee, Kwang Gu; Huh, Gyun Young; Hahn, Young Tae [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    2000-03-15

    The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. The approach to improve regulatory effectiveness is also reviewed and a transition to 'knowledge-based regulation' is suggested.

  16. Assessment of policy issues in nuclear safety regulation according to circumstantial changes

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Soon Heung; Chang, Soon Heung; Lee, Byong Ho; Baek, Won Pil; Roh, Chang Hyun; Lee, Kwang Gu; Kim, Hong Chae; Lee, Yong Ho [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1999-03-15

    The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. It is concluded that the Periodic Safety Review (PSR) should be implemented in Korea as soon as possible, in harmonization with the regulation for life extension of NPPs. The IAEA guidelines, including 10 year intervals and 11 safety factors, should be used as the basic guidelines. Efforts are also required to cope with other circumstantial changes such as the establishment of International Nuclear Regulators Association (INRA)

  17. An analysis of electronic health record-related patient safety incidents.

    Science.gov (United States)

    Palojoki, Sari; Mäkelä, Matti; Lehtonen, Lasse; Saranto, Kaija

    2017-06-01

    The aim of this study was to analyse electronic health record-related patient safety incidents in the patient safety incident reporting database in fully digital hospitals in Finland. We compare Finnish data to similar international data and discuss their content with regard to the literature. We analysed the types of electronic health record-related patient safety incidents that occurred at 23 hospitals during a 2-year period. A procedure of taxonomy mapping served to allow comparisons. This study represents a rare examination of patient safety risks in a fully digital environment. The proportion of electronic health record-related incidents was markedly higher in our study than in previous studies with similar data. Human-computer interaction problems were the most frequently reported. The results show the possibility of error arising from the complex interaction between clinicians and computers.

  18. Legal bases of safety regulations in electrical engineering

    Energy Technology Data Exchange (ETDEWEB)

    Jeiter, W

    1981-12-01

    Apart from the governmental regulations the rule for the prevention of accidents 'Electric plants and equipment' must be observed in order to protect the insurants. Actually, all these regulations do not contain any independent instructions. They rather utilize the VDE regulations and refer to them. The laws of electrical safety engineering are strongly influenced by harmonization efforts particularly within the European Communitties.

  19. Pakistan nuclear safety and radiation protection regulation 1990

    International Nuclear Information System (INIS)

    1990-01-01

    In this act regulations of nuclear safety and radiation protection in Pakistan has been explained. A legal and licensing procedure to handle protection of nuclear materials, processing storage of radioactive products has been described under this regulation. In these regulations full explanation of accidental exposure, delegation of powers and record keeping/waste disposal of radioactive has been given. (A.B.)

  20. Electronic Nicotine Delivery Systems (“E-Cigarettes”): Review of Safety and Smoking Cessation Efficacy

    Science.gov (United States)

    Harrell, Paul Truman; Simmons, Vani Nath; Correa, John Bernard; Padhya, Tapan Ashvin; Brandon, Thomas Henry

    2015-01-01

    Background and Objectives Cigarette smoking is common among cancer patients and is associated with negative outcomes. Electronic nicotine delivery systems (“e-cigarettes”) are rapidly growing in popularity and use, but there is limited information on their safety or effectiveness in helping individuals quit smoking. Data Sources The authors searched PubMed, Web of Science, and additional sources for published empirical data on safety and use of electronic cigarettes as an aid to quit smoking. Review Methods We conducted a structured search of the current literature up to and including November 2013. Results E-cigarettes currently vary widely in their contents and are sometimes inconsistent with labeling. Compared to tobacco cigarettes, available evidence suggests that e-cigarettes are often substantially lower in toxic content, cytotoxicity, associated adverse effects, and secondhand toxicity exposure. Data on the use of e-cigarettes for quitting smoking is suggestive, but ultimately inconclusive. Conclusions Clinicians are advised to be aware that the use of e-cigarettes, especially among cigarette smokers, is growing rapidly. These devices are unregulated, of unknown safety, and of uncertain benefit in quitting smoking. Implications for Practice In the absence of further data or regulation, oncologists are advised to discuss the known and unknown safety and efficacy information on e-cigarettes with interested patients, and to encourage patients to first try FDA-approved pharmacotherapies for smoking cessation. PMID:24898072

  1. Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

    OpenAIRE

    Ko, Wen-Hwa

    2015-01-01

    The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was cla...

  2. Safety Culture for Regulator Competence Management in Embarking States

    International Nuclear Information System (INIS)

    Kandil, M.

    2016-01-01

    Full text: Safety is based on preventive actions where the ability of a regulatory body to fulfill its responsibilities depends largely on the competence of its staff. Building employees’ skills and knowledge is an investment for each employee and in the future of the organization. This building must be the competence of its staff integration with their safety culture, the essential to ensure competent human resources as required in the IAEA safety standards and other documents, in which the need and importance of ensuring regulatory competence is emphasized. As it involves both operational and management issues, safety culture is a sensitive topic for regulators whose role is to ensure compliance with safety requirements and not to intervene in management decisions. A number of embarking States are aspiring to develop nuclear power generation and this means that, among other things, regulatory bodies have to be established and rapidly expanded. This paper reports major considerations on the integration of safety culture with an adequate competence management system for regulators in embarking states. (author

  3. Investigation and consideration on the framework of oversight-based safety regulation. U.S. NRC 'Risk-Informed, Performance-Based' Regulation

    International Nuclear Information System (INIS)

    Saji, Gen

    2001-01-01

    Regulation on safety, environment and health in Japan has before today been intended to correspond with an accident at forms of reinforcement of national standards and monitoring, if any. However, as it was thought that such regulation reinforcement was afraid to bring some social rigidity, and to weaken independent responsibility, as a result, because of anxiety of losing peoples' merits inversely, some fundamental directivity such as respect of self-responsibility principle' and 'necessary and least limit of regulation' were selected as a part of political innovation. On the other hand, at a background of wide improvements on various indexing values showing operation results of nuclear power stations in U.S.A., private independent effort on upgrading of safety is told to largely affect at beginning of INPO (Institute of Nuclear Power Operations), without regulation reinforcement of NRC side. This is a proof of concrete effect of transfer to oversight-based safety regulation. Here were introduced on nuclear safety in U.S.A. at a base of some references obtained on entering the 'MIT summer specialist program. Nuclear system safety', on focussing at new safety regulation of NRC and its effect and so on, and adding some considerations based on some knowledge thereafter. (G.K.)

  4. Nuclear safety: economic analysis of American, French and Japanese regulations

    International Nuclear Information System (INIS)

    Leveque, Francois

    2013-05-01

    While discussing and comparing the American, Japanese and French approaches and practices, and identifying the strengths and weaknesses of each of them, the author discusses why self-regulation and civil responsibility cannot guarantee a sufficient nuclear safety level, why the safety regulation authority must be independent from industry and government, whether a figure must be put to the safety objective (for example with a risk threshold), whether it is better to define detailed standards to be applied by manufacturers and operators or to define general performance criteria to be reached

  5. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  6. Nuclear safety regulations in the Republic of Croatia

    International Nuclear Information System (INIS)

    Cizmek, A.; Horvatic, M.; Ilijas, B.; Medakovic, S.

    2009-01-01

    Based on Nuclear Safety Act (Official Gazette No. 173/03) in 2006 State Office for Nuclear Safety (SONS) adopted beside Ordinance on performing nuclear activities (Official Gazette No. 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (Official Gazette No. 74/06) the new Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08) and Ordinance on conditions for nuclear safety and protection with regard to the sitting, design, construction, use and decommissioning of a facility in which a nuclear activity is to be performed (Official Gazette No. 71/08). The Ordinance on performing nuclear activities regulates the procedure of notification of the intent to perform nuclear activities, submitting the application for the issue of a licence to perform nuclear activities, and the procedure for issuing decisions on granting a license to perform nuclear activity. The Ordinance also regulates the content of the form for notification of the intent to perform nuclear activities, as well as of the application for the issue of a licence to perform the nuclear activity and the method of keeping the register of nuclear conditions, whereas compliance is established by the decision passed by SONS. Ordinance on special conditions (requirements) for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety regulates these mentioned activities Ordinance on the control of nuclear material and special equipment lays down the list of nuclear materials and special equipment as well as of nuclear activities covered by the system of control of production of special equipment and non-nuclear material, the procedure for notifying the intention to and filing the application for a licence to carry out nuclear activities, and the format and contents of the forms for doing so. This Ordinance

  7. Who regulates food? Australians' perceptions of responsibility for food safety.

    Science.gov (United States)

    Henderson, Julie; Coveney, John; Ward, Paul

    2010-01-01

    Food scares have diminished trust in public institutions to guarantee food safety. Food governance after the food scare era is concerned with institutional independence and transparency leading to a hybrid of public and private sector management and to mechanisms for consumer involvement in food governance. This paper explores Australian consumers' perceptions of who is, and should be responsible for food safety. Forty-seven participants were interviewed as part of a larger study on trust in the food system. Participants associate food governance with government, industry, and the individual. While few participants can name the national food regulator, there is a strong belief that the government is responsible for regulating the quality and safety of food. Participants are wary of the role of the food industry in food safety, believing that profit motives will undermine effective food regulation. Personal responsibility for food safety practices was also identified. While there are fewer mechanisms for consumer involvement and transparency built into the food governance system, Australian consumers display considerable trust in government to protect food safety. There is little evidence of the politicisation of food, reflecting a level of trust in the Australian food governance system that may arise from a lack of exposure to major food scares.

  8. Fusion safety regulations in the United States: Progress and trends

    International Nuclear Information System (INIS)

    DeLooper, J.

    1994-01-01

    This paper explores the issue of regulations as they apply to current and future fusion experimental machines. It addresses fusion regulatory issues, current regulations used for fusion, the Tokamak Fusion Test Reactor experience with regulations, and future regulations to achieve fusion's safety and environmental potential

  9. Implementing electronic handover: interventions to improve efficiency, safety and sustainability.

    Science.gov (United States)

    Alhamid, Sharifah Munirah; Lee, Desmond Xue-Yuan; Wong, Hei Man; Chuah, Matthew Bingfeng; Wong, Yu Jun; Narasimhalu, Kaavya; Tan, Thuan Tong; Low, Su Ying

    2016-10-01

    Effective handovers are critical for patient care and safety. Electronic handover tools are increasingly used today to provide an effective and standardized platform for information exchange. The implementation of an electronic handover system in tertiary hospitals can be a major challenge. Previous efforts in implementing an electronic handover tool failed due to poor compliance and buy-in from end-users. A new electronic handover tool was developed and incorporated into the existing electronic medical records (EMRs) for medical patients in Singapore General Hospital (SGH). There was poor compliance by on-call doctors in acknowledging electronic handovers, and lack of adherence to safety rules, raising concerns about the safety and efficiency of the electronic handover tool. Urgent measures were needed to ensure its safe and sustained use. A quality improvement group comprising stakeholders, including end-users, developed multi-faceted interventions using rapid PDSA (P-Plan, D-Do, S-Study, A-Act ) cycles to address these issues. Innovative solutions using media and online software provided cost-efficient measures to improve compliance. The percentage of unacknowledged handovers per day was used as the main outcome measure throughout all PDSA cycles. Doctors were also assessed for improvement in their knowledge of safety rules and their perception of the electronic handover tool. An electronic handover tool complementing daily clinical practice can be successfully implemented using solutions devised through close collaboration with end-users supported by the senior leadership. A combined 'bottom-up' and 'top-down' approach with regular process evaluations is crucial for its long-term sustainability. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. Enacting laws concerning radiation safety management for students using X-rays and electron beams under 1 MeV

    International Nuclear Information System (INIS)

    Nishizawa, Kunihide; Shibata, Michihiro; Saze, Takuya

    2004-01-01

    Laws concerning radiation safety management were analyzed from the point of view of defining precisely what is meant by radiation and what is meant by the subject. There are no laws to protect students from radiation hazards when using X-rays and electron beams under 1 MeV for research and/or education. The Law concerning Technical Standards for Preventing Radiation Hazards gives the authorities the power to enact new rules and regulations that will protect the students. The Radiation Council must take charge for enactment of all laws regarding radiation safety management. (author)

  11. A study in improvement of administrative system in the nuclear safety regulation

    International Nuclear Information System (INIS)

    Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho

    2001-03-01

    One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents

  12. A study in improvement of administrative system in the nuclear safety regulation

    Energy Technology Data Exchange (ETDEWEB)

    Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-03-15

    One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents.

  13. Electronic Code of Federal Regulations

    Data.gov (United States)

    National Archives and Records Administration — The Electronic Code of Federal Regulations (e-CFR) is the codification of the general and permanent rules published in the Federal Register by the executive...

  14. Public opinion poll on safety and regulations of nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Park, M. I.; Park, B. I.; Lee, S. M. [Gallup Korea, Seoul (Korea, Republic of)

    2004-02-15

    The purpose of this poll is not only to research understanding on safety and regulations of nuclear energy and to compare the result by time series followed 2003 to 2002 years, also to establish the public relations strategies and to offer information for developing long-term policies. The contents of the study are on the general perception, safety, management of nuclear power station, regulations and surroundings about nuclear energy.

  15. Regulator Loss Functions and Hierarchical Modeling for Safety Decision Making.

    Science.gov (United States)

    Hatfield, Laura A; Baugh, Christine M; Azzone, Vanessa; Normand, Sharon-Lise T

    2017-07-01

    Regulators must act to protect the public when evidence indicates safety problems with medical devices. This requires complex tradeoffs among risks and benefits, which conventional safety surveillance methods do not incorporate. To combine explicit regulator loss functions with statistical evidence on medical device safety signals to improve decision making. In the Hospital Cost and Utilization Project National Inpatient Sample, we select pediatric inpatient admissions and identify adverse medical device events (AMDEs). We fit hierarchical Bayesian models to the annual hospital-level AMDE rates, accounting for patient and hospital characteristics. These models produce expected AMDE rates (a safety target), against which we compare the observed rates in a test year to compute a safety signal. We specify a set of loss functions that quantify the costs and benefits of each action as a function of the safety signal. We integrate the loss functions over the posterior distribution of the safety signal to obtain the posterior (Bayes) risk; the preferred action has the smallest Bayes risk. Using simulation and an analysis of AMDE data, we compare our minimum-risk decisions to a conventional Z score approach for classifying safety signals. The 2 rules produced different actions for nearly half of hospitals (45%). In the simulation, decisions that minimize Bayes risk outperform Z score-based decisions, even when the loss functions or hierarchical models are misspecified. Our method is sensitive to the choice of loss functions; eliciting quantitative inputs to the loss functions from regulators is challenging. A decision-theoretic approach to acting on safety signals is potentially promising but requires careful specification of loss functions in consultation with subject matter experts.

  16. Evolution of nuclear safety regulation for BARC Facilities

    International Nuclear Information System (INIS)

    Jayarajan, K.; Taly, Y.K.

    2017-01-01

    Safety programmes in BARC stared during the formative years and grown its stature, as the years passed by. Seventeen years of BSC, with one hundred meetings, have been quite eventful with several achievements. BSC could bring all facilities of BARC under its safety umbrella and could streamline many safety and regulatory activities. BSC aims at incident free operation of all facilities and protection of the workers, the public, the environment from radiation and other hazards. Although, incidents could not be entirely prevented, BSC have taken every event as a lesson and used the experience for improving safety. Safety enhancement is an endless journey, which has to be performed by joining hands of the managers, designers, manufacturers, inspectors and operators, in addition to the regulators

  17. Electronic clinical safety reporting system: a benefits evaluation.

    Science.gov (United States)

    Elliott, Pamela; Martin, Desmond; Neville, Doreen

    2014-06-11

    Eastern Health, a large health care organization in Newfoundland and Labrador (NL), started a staged implementation of an electronic occurrence reporting system (used interchangeably with "clinical safety reporting system") in 2008, completing Phase One in 2009. The electronic clinical safety reporting system (CSRS) was designed to replace a paper-based system. The CSRS involves reporting on occurrences such as falls, safety/security issues, medication errors, treatment and procedural mishaps, medical equipment malfunctions, and close calls. The electronic system was purchased from a vendor in the United Kingdom that had implemented the system in the United Kingdom and other places, such as British Columbia. The main objective of the new system was to improve the reporting process with the goal of improving clinical safety. The project was funded jointly by Eastern Health and Canada Health Infoway. The objectives of the evaluation were to: (1) assess the CSRS on achieving its stated objectives (particularly, the benefits realized and lessons learned), and (2) identify contributions, if any, that can be made to the emerging field of electronic clinical safety reporting. The evaluation involved mixed methods, including extensive stakeholder participation, pre/post comparative study design, and triangulation of data where possible. The data were collected from several sources, such as project documentation, occurrence reporting records, stakeholder workshops, surveys, focus groups, and key informant interviews. The findings provided evidence that frontline staff and managers support the CSRS, identifying both benefits and areas for improvement. Many benefits were realized, such as increases in the number of occurrences reported, in occurrences reported within 48 hours, in occurrences reported by staff other than registered nurses, in close calls reported, and improved timelines for notification. There was also user satisfaction with the tool regarding ease of use

  18. 78 FR 30661 - Electronic Fund Transfers (Regulation E)

    Science.gov (United States)

    2013-05-22

    ... Part 1005 Electronic Fund Transfers (Regulation E); Final Rule #0;#0;Federal Register / Vol. 78 , No... (Regulation E) AGENCY: Bureau of Consumer Financial Protection. ACTION: Final rule; official interpretation.../regulations/final-remittance-rule-amendment-regulation-e/ . SUPPLEMENTARY INFORMATION: I. Summary of the Final...

  19. Effective radiological safety program for electron linear accelerators

    International Nuclear Information System (INIS)

    Swanson, W.P.

    1980-10-01

    An outline is presented of some of the main elements of an electron accelerator radiological safety program. The discussion includes types of accelerator facilities, types of radiations to be anticipated, activity induced in components, air and water, and production of toxic gases. Concepts of radiation shielding design are briefly discussed and organizational aspects are considered as an integral part of the overall safety program

  20. Effect of electronic device use on pedestrian safety : a literature review.

    Science.gov (United States)

    2016-04-01

    This literature review on the effect of electronic device use on pedestrian safety is part of a research project sponsored by the Office of Behavioral Safety Research in the National Highway Traffic Safety Administration (NHTSA). An extensive literat...

  1. Contributions to the research programs in nuclear and industrial electronics, domestic production of instrumentation, safety and control systems and equipment for nuclear reactors and auxiliary installations

    International Nuclear Information System (INIS)

    Talpariu, C; Talpariu, J.; Matei, C.

    2001-01-01

    Domestic production of component system and equipment for the control and safety of nuclear facilities was one of the priority objective of the Nuclear Research Institute Pitesti. The problems addressed were particularly related to design and production of analog and digital equipment for measurements, triggering and display of the values of process parameters as well as to regulating complex functions of this equipment. Associated to this effort were the research works concerning: - reliability and in-service life-time of the electronic components and equipment in the safety and control systems for nuclear processes; - radiation endurance of industrial electronic components; utilization of whirling currents in calandria tube testing; - expert systems and applications in nuclear reactor control and safety; design and testing methods of process real time software packages for safety in control critical systems for nuclear domain. There are presented characteristics of the following equipment: 1. amplifier for ionization chambers with triggering comparator circuits for the CANDU 600 reactor shut down system; 2. amplifier for ionization chambers without triggering comparator circuits for power regulating system; 3. safety and regulating computerized system for C9 and C5 cans; 4. acquisition system for dosimetric data in nuclear facilities; 5. program able digital comparator for the reactor shut down system; 6. stationary gamma areal monitors for CANDU 600 reactors and other nuclear facilities

  2. 75 FR 50700 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge...

    Science.gov (United States)

    2010-08-17

    ...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, and Drawbridge Operation... notice lists temporary safety zones, security zones, special local regulations, and drawbridge operation... responsive to the safety and security needs within their jurisdiction; therefore, District Commanders and...

  3. Global approaches to regulating electronic cigarettes

    Science.gov (United States)

    Kennedy, Ryan David; Awopegba, Ayodeji; De León, Elaine; Cohen, Joanna E

    2017-01-01

    Objectives Classify and describe the policy approaches used by countries to regulate e-cigarettes. Methods National policies regulating e-cigarettes were identified by (1) conducting web searches on Ministry of Health websites, and (2) broad web searches. The mechanisms used to regulate e-cigarettes were classified as new/amended laws, or existing laws. The policy domains identified include restrictions or prohibitions on product: sale, manufacturing, importation, distribution, use, product design including e-liquid ingredients, advertising/promotion/sponsorship, trademarks, and regulation requiring: taxation, health warning labels and child-safety standards. The classification of the policy was reviewed by a country expert. Results The search identified 68 countries that regulate e-cigarettes: 22 countries regulate e-cigarettes using existing regulations; 25 countries enacted new policies to regulate e-cigarettes; 7 countries made amendments to existing legislation; 14 countries use a combination of new/amended and existing regulation. Common policies include a minimum-age-of-purchase, indoor-use (vape-free public places) bans and marketing restrictions. Few countries are applying a tax to e-cigarettes. Conclusions A range of regulatory approaches are being applied to e-cigarettes globally; many countries regulate e-cigarettes using legislation not written for e-cigarettes. PMID:27903958

  4. 78 FR 48468 - Delphi Corporation, Electronics and Safety Division, Including On-Site Leased Workers From...

    Science.gov (United States)

    2013-08-08

    ..., Electronics and Safety Division, Including On-Site Leased Workers From Securitas, Bartech, Flint Janitorial... Adjustment Assistance on May 20, 2013, applicable to workers of Delphi Corporation, Electronics and Safety... on- site at the Flint, Michigan location of Delphi Corporation, Electronics and Safety Division. The...

  5. 49 CFR 397.2 - Compliance with Federal motor carrier safety regulations.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Compliance with Federal motor carrier safety...) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS TRANSPORTATION OF HAZARDOUS MATERIALS; DRIVING AND PARKING RULES General § 397.2 Compliance with...

  6. A study on enforcement effects of radiation safety control regulations for diagnostic X-ray equipment

    International Nuclear Information System (INIS)

    Sung, Mo IL; Park, Myeong Hwan; Kwon, Duk Moon; Lee, Joon IL

    1999-01-01

    The purposes of this study are to analyze the realities after enforcements of safety control regulations for diagnostic X-ray equipment and to suggest means for an improvement of low radiation safety control. A questionnaire survey for medical radiologic technologists was carried out to determine enforcement effects of the safety control regulations. The results of analysis from the survey are as follows. That is, most of he respondents realized the importance of the radiation safety control system, but about a half of them revealed that regulations were not well observed in accordance with their purposes. Only 43.9 percent of the respondents took an active part in quality control of radiation. And responsibility, sex, age, and knowledge for safety control were important indicators for observations of the regulations. Training for the safety control regulations are needed to ensure safety control and proper usage of diagnostic X-ray equipment. And management of organizations using diagnostic X-ray equipment have to understand and stress the importance of radiation safety control system. (author)

  7. The UK nuclear regulator's view of external influences on safety

    International Nuclear Information System (INIS)

    Summers, J.L.

    2001-01-01

    Over the past forty or so years, significant changes have taken place in the UK nuclear industry and the pace of change is continually increasing. As a consequence, the Nuclear Installations Inspectorate (NII), the UK's nuclear regulator, has also had to change. This paper describes some of the challenges to safety that have arisen in recent years and how NII's style of regulation has had to adapt to ensure that safety is maintained and improved. NII's approach has been to: be proactive in its relations with Government and market regulators; adopt new competencies to equip it for the challenges it faces; strive to improve its efficiency and effectiveness; and develop new approaches to regulating changes in licensees' organisations and ways of working. Importantly, NII seeks to anticipate change rather than react to it. (author)

  8. Safety performance indicators used by the Russian Safety Regulatory Authority in its practical activities on nuclear power plant safety regulation

    International Nuclear Information System (INIS)

    Khazanov, A.L.

    2005-01-01

    The Sixth Department of the Nuclear, Industrial and Environmental Regulatory Authority of Russia, Scientific and Engineering Centre for Nuclear and Radiation Safety process, analyse and use the information on nuclear power plants (NPPs) operational experience or NPPs safety improvement. Safety performance indicators (SPIs), derived from processing of information on operational violations and analysis of annual NPP Safety Reports, are used as tools to determination of trends towards changing of characteristics of operational safety, to assess the effectiveness of corrective measures, to monitor and evaluate the current operational safety level of NPPs, to regulate NPP safety. This report includes a list of the basic SPIs, those used by the Russian safety regulatory authority in regulatory activity. Some of them are absent in list of IAEA-TECDOC-1141 ('Operational safety performance indicators for nuclear power plants'). (author)

  9. A German perspective on advances in safety standards and regulations

    International Nuclear Information System (INIS)

    Berg, H.P.; Herttrich, P.M.

    1993-01-01

    At present, different proposals for evolutionary or innovative reactors are under consideration. Therefore, it is necessary that the regulators give guidance on the required safety characteristics of future designs of nuclear power plants. On the one hand, existing regulations have to be updated according to the current state of science and technology. Best available and adequately approved technology has to be used as a yardstick for the acceptability of future basic design features. On the other hand, potential safety features of innovative or revolutionary designs must be considered as serious competitors and potential technical solutions taking the state of maturity of the concepts, the extent of practical experience and the level of effort needed for realization into due account. On this background, recent developments of the Atomic Energy Act, of safety regulations and investigations of requirements for future designs in the Federal Republic of Germany and current projects of international cooperation are presented. (author)

  10. Assessment of policy issues in nuclear safety regulation according to circumstantial changes

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Soon Heung; Lee, Byong Ho; Baek, Woon Pil; Lee, Seong Wook; Choi, Seong Soo; Roh, Chang Hyun; Lee, Kwang Gu [Korea Advanced Institute of Scienc and Technology, Taejon (Korea, Republic of)

    1998-03-15

    The objective of the work is to assess various issues in nuclear safety regulation in consideration of circumstantial changes. Emphasis is given to the safety of operating NPPs. The derivation of an effective regulation system considering 'Rhodic Safety Review (PSR)', 'operating License Renewal (LR)', 'backfitting' and 'maintenance rule' is the main objective of the first two years. It is found that those approaches should be introduced in Korea as soon as possible, with cross lingkage to maximize the effectiveness of regulation. In particular, the approaches for PSR are discussed with consultation of IAEA document and foreign practices.

  11. [Electronic patient record as the tool for better patient safety].

    Science.gov (United States)

    Schneider, Henning

    2015-01-01

    Recent studies indicate again that there is a deficit in the use of electronic health records (EHR) in German hospitals. Despite good arguments in favour of their use, such as the rapid availability of data, German hospitals shy away from a wider implementation. The reason is the high cost of installing and maintaining the EHRs, for the benefit is difficult to evaluate in monetary terms for the hospital. Even if a benefit can be shown it is not necessarily evident within the hospital, but manifests itself only in the health system outside. Many hospitals only manage to partly implement EHR resulting in increased documentation requirements which reverse their positive effect.In the United States, electronic medical records are also viewed in light of their positive impact on patient safety. In particular, electronic medication systems prove the benefits they can provide in the context of patient safety. As a result, financing systems have been created to promote the digitalisation of hospitals in the United States. This has led to a large increase in the use of IT systems in the United States in recent years. The Universitätsklinikum Eppendorf (UKE) introduced electronic patient records in 2009. The benefits, in particular as regards patient safety, are numerous and there are many examples to illustrate this position. These positive results are intended to demonstrate the important role EHR play in hospitals. A financing system of the ailing IT landscape based on the American model is urgently needed to benefit-especially in terms of patient safety-from electronic medical records in the hospital.

  12. Development in France of nuclear safety technical regulations and standards used in the licensing procedure

    International Nuclear Information System (INIS)

    Lebouleux, P.

    1983-04-01

    Initially, the Commissariat a l'Energie Atomique was the overall structure which encompassed all nuclear activities in France, including those connected with radiological protection and nuclear safety. As other partners appeared, the Authorities have laid down national regulations relative to nuclear installations since 1963. These regulations more particularly provide for the addition of prescriptions with which the applicant must comply to obtain the necessary licenses and the establishment of General Technical Regulations pertaining to nuclear safety. The technical regulation related to nuclear safety in France is made of a set of regulation texts, of a different nature, that define the requirements for the construction, commissioning and operation of nuclear facilities. Simultaneously, the safety authorities (Service Central de Surete des Installations Nucleaires: SCSIN) issue recommendations or guides which are not strictly speaking regulations in the juridical sense; they are called ''Regles Fondamentales de Surete'' (RFS). The RFS set up and detail the conditions, the respect of which is deemed to be complying with the French regulation practice, for the subject to which they relate. Their purpose is to make known rules judged acceptable by safety authorities, thus making the safety review easier. A RFS, or a letter, can also give the result of the examination of the constructor and operator codes (RCC) by safety authorities

  13. NRC safety research in support of regulation, 1988

    International Nuclear Information System (INIS)

    1989-05-01

    This report, the fourth in a series of annual reports, was prepared in response to Congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during 1988. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

  14. The improvement of nuclear safety regulation : American, European, Japanese, and South Korean experiences

    International Nuclear Information System (INIS)

    Cho, Byung Sun

    2005-01-01

    Key concepts in South Korean nuclear safety regulation are safety and risk. Nuclear regulation in South Korea has required reactor designs and safeguards that reduce the risk of a major accident to less than one in a million reactor-years-a risk supposedly low enough to be acceptable. To data, in South Korean nuclear safety regulation has involved the establishment of many technical standards to enable administration enforcement. In scientific lawsuits in which the legal issue is the validity of specialized technical standards that are used for judge whether a particular nuclear power plant is to be licensed, the concept of uncertainty law is often raised with regard to what extent the examination and judgement by the judicial power affects a discretion made by the administrative office. In other words, the safety standards for nuclear power plants has been adapted as a form of the scientific technical standards widely under the idea of uncertainty law. Thus, the improvement of nuclear safety regulation in South Korea seems to depend on the rational lawmaking and a reasonable, judicial examination of the scientific standards on nuclear safety

  15. FOOD SAFETY REGULATIONS BASED ON REAL SCIENCE

    Directory of Open Access Journals (Sweden)

    Huub LELIEVELD

    2015-10-01

    Full Text Available Differences in regulations result in needless destruction of safe food and hamper food trade. The differences are not just the result of the history of food safety regulations, often developed in times before global cooperation, but are also built in new regulations. It may be responses to media hypes or for other reasons, but in most cases the differences cannot be justified scientifically. A major difficulty is that, due to the developments in analytical techniques the number of chemicals that are found in food is increasing rapidly and chemicals are always suspected to be a safety risk. By far most chemicals are of natural origin but could not be detected in the past because the methods available in the past were not sensitive enough. Demanding the absence of chemicals because the risk they present is unknown, however, would eventually make all food unacceptable. The general public should be shown that everything they eat is chemical, and all food components will be toxic if the amount is too high. It should also be shown that many of these chemicals will also cause illness and death if there is not enough of it as is the case with vitamins and minerals.

  16. Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

    International Nuclear Information System (INIS)

    Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

    2003-01-01

    Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

  17. Environmental Regulation and Food Safety: Studies of Protection ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2006-01-01

    Jan 1, 2006 ... Book cover Environmental Regulation and Food Safety: Studies of ... are sometimes perceived in developing countries as nontariff barriers to trade. ... In some cases, products that had initially been refused access to a ...

  18. Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

    Directory of Open Access Journals (Sweden)

    Wen-Hwa Ko

    2015-12-01

    Full Text Available The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry.

  19. The Competence Promoting by NNSA for Keeping High Level Nuclear Safety: The Corner Stone of the Nuclear Safety Regulation Edifice

    International Nuclear Information System (INIS)

    Hu, L.

    2016-01-01

    Facing the fast development of the nuclear power industry and the application of radioactive sources, The MEP(NNSA) is endeavoured to promoting its competency, including: complementing the law system, training and recruiting staff to keep a capable team, constructing the R&D base to keep the basic capability, promoting safety culture both for the industry and the regulator. After the Fukushima nuclear accident, the MEP(NNSA) planned to construct R&D base, in which the Platform Nuclear Safety Monitoring and Emergency Responding, the Platform of Safety Technology of PWR Testing, the Laboratory of Safety Management Technology of Nuclear Waste Verification, the Laboratory of Environmental Radiation Monitoring and the Center of International Cooperation are included. On the other hand, the MEP(NNSA) issued Chinese nuclear safety culture policy declaration in 2014, and carried out a large scale Specialized Action for Nuclear Safety Promotion to promote the nuclear safety culture both for the industry and herself. For the nuclear regulator, It is essential to conduct the competence promoting by both “hardware” and “software”, the former is the material foundation of regulation authority, which will be effectively functioning under the facilitating of the latter. (author)

  20. Safety evaluation and regulation of chemicals. 2. Impact of regulations - improvement of methods

    Energy Technology Data Exchange (ETDEWEB)

    Homburger, F [ed.

    1985-01-01

    This volume assesses the impact of new scientific knowledge on the testing and regulation of chemicals, including food additives, drugs, cosmetics, pesticides, and other commercial substances. Apart from describing the newest tests, regulations, and risk assessment strategies, chapters reflect changes forced by both the growing need for cost containment and the mounting pressure to find alternatives to animal testing. Based on an international congress, the book also brings the advantage of diversity in the background and nationality of the authors, thus allowing a view of central problems according to the different interests of academics, industry scientists, government scientists, and regulators. The book opens with coverage of national and international regulations designed to prevent and control damage to human health and the environment. Topics range from basic problems of policy design and enforcement to the specific requirements for chemical regulation in developing countries. The next chapters cover new tests, systems, and assays used in in vivo safety testing. Readers will find a critical assessment of tests used to determine teratogenicity, mutagenicity, carcinogenicity, neurotoxicity and chemical lethality. Other topics include factors operating in the public perception of chemical hazards, guidelines for decision making in the management and regulation of risks, and future trends in the methodology of safety evaluation. The volume concludes with an overview of in vitro methods for testing hepatotoxicity. Several short-term in vitro test models and limited in vivo bioassays are presented and evaluated in terms of their capacity to substitute for long-term animal studies. Expert and thorough in its coverage, the book offers a wealth of technical and practical information for toxicologists, pharmacologists, industrial policy makers, and government regulators. (orig.). With 67 figs., 34 tabs.

  1. Knowledge Management for Safety Regulators: Cooperation to Achieve a Much Needed Product

    International Nuclear Information System (INIS)

    Mallick, S.

    2016-01-01

    Full text: Knowledge management (KM) has been identified by a number of IAEA documents as one of the key factors that can contribute to the safe and efficient operation of nuclear facilities in Member States. The IAEA Strategic Approaches to Education and Training in Nuclear and Radiation, Transport and Waste Safety identify and underline KM as an important line of action for effective national and organizational strategies in education and training. The capacity building “umbrella concept”, developed within the Action Plan in Nuclear Safety, also recognizes KM as one of the main four pillars (Education and Training, Human Resource Development, Knowledge Management and Knowledge Networks) of capacity building. Within existing IAEA publications, there is currently no specific practical guidance on how to develop and implement KM programmes for regulators. As such, in 2014, the IAEA Steering Committee on Regulatory Capacity Building and Knowledge Management requested the IAEA to develop a publication providing such practical guidance. The objective of the publication is to provide practical guidance to Member States on how to plan, establish and maintain an effective safety KM programme for regulators of facilities and activities. The report will identify benefits and uses of KM by regulators and will describe how a regulator could use KM in support of its functions. This presentation will provide an overview of the Knowledge Management for Safety Regulators document while highlighting the cross-departmental cooperation (i.e., NS and NE) used in its development. Furthermore, this presentation will provide insight into the challenges currently being faced by safety regulators vis-à-vis KM programmes and present potential paths forward with respect to the definition of efficient and effective KM indicators. (author

  2. Study on the development of safety regulations for geological disposal of high-level radioactive waste

    International Nuclear Information System (INIS)

    Wei Fangxin

    2012-01-01

    The development of regulations under Regulations on Safety Management of Radioactive Waste has become necessary as the issuance of it. The regulations related to geological disposal of high-level radioactive waste can promote the progress of research and development on geological disposal of high-level radioactive waste in China. This paper has present suggestions on development of regulations on geological disposal of high-level radioactive waste by analyzing development of safety regulations on geological disposal of high-level radioactive waste in foreign countries and problems occurred in China and discussed important issues related to the development of safety regulations on geological disposal of high-level radioactive waste. (author)

  3. Safety regulation for the design approval of special form radioactive sources

    International Nuclear Information System (INIS)

    Cho, Woon-Kap

    2009-01-01

    Several kinds of special form radioactive sources for industrial, medical applications are being produced in Korea. Special form radioactive sources should meet strict safety requirements specified in the domestic safety regulations and the design of the sources should be certified by the regulatory authority, the Ministry of Education, Science and Technology (MEST). Several safety tests such as impact, percussion, heating, and leak tests are performed on the sources according to the domestic regulations and the international safety standards such as ANSI N542-1977 and ISO 2919-1999(E). As a regulatory expert body, Korea Institute of Nuclear Safety (KINS) assesses various types of application documents, such as safety analysis report, quality assurance program, and other documents evidencing fulfillment of requirements for design approval of the special form radioactive sources, submitted by a legal person who intends to produce special form radioactive sources and then reports the assessment result to MEST. A design approval certificate is issued to the applicant by MEST on the basis of a technical evaluation report presented by KINS.

  4. A comparison of some Mexican/U.S. safety regulations

    Energy Technology Data Exchange (ETDEWEB)

    Bunner, W.R. [Training Associates, Columbus, OH (United States)

    1994-12-31

    In the US, safety and hygiene began to be enforced broadly with the formation of the US Department of Labor`s, Occupational Safety and Health Administration (OSHA) in 1970. In Mexico, the 1917 Constitution required companies to protect their workers against safety and hygiene hazards in the workplace. Additional requirements were added with the Federal Labor Law of 1931. General safety and hygiene regulations were added in 1934. Modern-day federal labor law in Mexico requires the creation of mixed safety and hygiene commissions in all industries. However, only about 114,000 workplaces have registered mixed commissions. In a similar vein, the most favored OSHA reform bill in the US proposes to require safety and health committees in all work places. At this time such committees are common in larger companies but not in smaller ones.

  5. CONFORMITY TO OCCUPATIONAL SAFETY AND HEALTH REGULATIONS IN MALAYSIAN SMALL AND MEDIUM ENTERPRISES

    OpenAIRE

    Baba Md Deros; Ahmad Rasdan Ismail; Jaharah A. Ghani; Mohd Yusri Mohd Yusof

    2014-01-01

    Regulation on occupational safety and health in Malaysia had evolved from the prescriptive factory and machinery act to a self-regulated occupational safety and health act. However, from the authors’ observation the high standards of occupational safety and health culture that surpass the legal requirement were not widely practiced by Small and Medium Enterprises (SMEs). The two main objectives of this study are: First, first, to identify and determine the level of conformity and second...

  6. Framework for applying probabilistic safety analysis in nuclear regulation

    International Nuclear Information System (INIS)

    Dimitrijevic, V.B.

    1997-01-01

    The traditional regulatory framework has served well to assure the protection of public health and safety. It has been recognized, however, that in a few circumstances, this deterministic framework has lead to an extensive expenditure on matters hat have little to do with the safe and reliable operation of the plant. Developments of plant-specific PSA have offered a new and powerful analytical tool in the evaluation of the safety of the plant. Using PSA insights as an aid to decision making in the regulatory process is now known as 'risk-based' or 'risk-informed' regulation. Numerous activities in the U.S. nuclear industry are focusing on applying this new approach to modify regulatory requirements. In addition, other approaches to regulations are in the developmental phase and are being evaluated. One is based on the performance monitoring and results and it is known as performance-based regulation. The other, called the blended approach, combines traditional deterministic principles with PSA insights and performance results. (author)

  7. Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan.

    Science.gov (United States)

    Ko, Wen-Hwa

    2015-12-01

    The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry. Copyright © 2015. Published by Elsevier B.V.

  8. The Role of the Regulator in the Field of Safety Culture to Shun Nuclear Accident

    International Nuclear Information System (INIS)

    Kandil, M.M.

    2016-01-01

    The 2011 accident at the Fukushima Daiichi nuclear power plant in Japan has, as might be expected, led to improvements in equipment at plants around the world that have fortified safety systems and allowed for better protection against rare, extreme natural events. Equally important to the process of improving nuclear safety is the emphasis placed on implementing quality improvements to the human side of nuclear safety, a crucial element that is often not considered by those outside the nuclear sector. Ensuring nuclear reactor safety is not only a question of physical protection against all credible threats, enhancing robustness of important safety systems and increasing redundancy of back-up power and water cooling systems, but also one of making certain that qualified and trained staff are supported by effective procedures. However, these assets are valued only in an organizational culture that places a premium on ensuring high levels of safety, or implementing what is called an effective “nuclear safety culture”. Principles, characteristics and factors for effective safety culture are to great extent similar between licencees and regulatory bodies and can be applied for developing RB’s safety. Safety is the primary purpose of the regulatory body, Regulator plays a significant role in the field of nuclear safety even though the prime responsibility for safety belongs to the operator, and it is the regulator which actually decides what is considered to be safe. In order to effectively implement the international principle of high level of nuclear safety, nuclear safety culture should be clearly named as an objective in international nuclear legal acts and the regulator’s responsibility for promotion of nuclear safety culture should be established. What is more difficult for the regulator is finding the right balance of firmness but fairness in dealing with the operator. In addition to enforcing safety regulations, the regulator should have a positive

  9. Fuelling regulation with Electronic fuel injection for small spark ignition engine using Fuzzy Logic

    International Nuclear Information System (INIS)

    Shah, S.R.; Sahir, M.H.

    2004-01-01

    The use of Electronic Control systems in automotive applications gives the design engineer greater control over various processes compared with mechanical methods Examples of such electronic control systems are Electronic Fuel Injection (EFI), Traction Control Systems (TCS) and Anti-lock Braking Systems (ABS). In addition, the development of inexpensive and fast microcontrollers has remarkably improve, performance of passive and active safety systems of automobiles, without causing excessive increase in prices of vehicles -a favourable factor from the consumer's perspective. This paper deals with a possible electronic aid for the improvement of power control in a motorcycle. Controlling the speed and power of a motorcycle is difficult; especially on bumpy and uneven terrain. In this paper, the development of an EPI system is discussed, incorporating artificial intelligence to regulate the fuel supplied to the engine. It would minimize wheel slippage and jerky and sudden acceleration which potentially dangerous. It would also reduce production of large quantities of pollutant like hydrocarbons and carbon monoxide. Fuel consumption would also improve during stop-and-go traffic. (author)

  10. 76 FR 49532 - Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the...

    Science.gov (United States)

    2011-08-10

    ...-0112] Federal Motor Vehicle Safety Standards; Electronic Stability Control; Technical Report on the Effectiveness of Electronic Stability Control Systems for Cars and LTVs AGENCY: National Highway Traffic Safety..., Electronic Stability Control Systems. The report's title is: Crash Prevention Effectiveness in Light-Vehicle...

  11. 49 CFR 238.105 - Train electronic hardware and software safety.

    Science.gov (United States)

    2010-10-01

    ... and software system safety as part of the pre-revenue service testing of the equipment. (d)(1... safely by initiating a full service brake application in the event of a hardware or software failure that... 49 Transportation 4 2010-10-01 2010-10-01 false Train electronic hardware and software safety. 238...

  12. Assessing risks and regulating safety standards in the oil and gas industry: the Peruvian experience.

    OpenAIRE

    Arturo Leonardo Vásquez Cordano; Julio Salvador Jácome; Raúl Lizardo García Carpio; Victor Fernández Guzman

    2013-01-01

    Environmental regulation has usually focused on controlling continuous sources of pollution such as CO2 emissions through carbon taxes. However, the 2010 oil spill in the Gulf of Mexico has shown that accidents associated to safety failures can also generate bursts of pollution with serious environmental consequences. Regulating safety conditions to prevent accidents in the oil and gas industry is challenging because public regulators cannot perfectly observe whether firms comply with safety ...

  13. No sisyphean task: how the FDA can regulate electronic cigarettes.

    Science.gov (United States)

    Paradise, Jordan

    2013-01-01

    The adverse effects of smoking have fostered a natural market for smoking cessation and smoking reduction products. Smokers attempting to quit or reduce consumption have tried everything: "low" or "light" cigarettes; nicotine-infused chewing gum, lozenges, and lollipops; dermal patches; and even hypnosis. The latest craze in the quest to find a safer source of nicotine is the electronic cigarette. Electronic cigarettes (e-cigarettes) have swept the market, reaching a rapidly expanding international consumer base. Boasting nicotine delivery and the tactile feel of a traditional cigarette without the dozens of other chemical constituents that contribute to carcinogenicity, e-cigarettes are often portrayed as less risky, as a smoking reduction or even a complete smoking cessation product, and perhaps most troubling for its appeal to youth, as a flavorful, trendy, and convenient accessory. The sensationalism associated with e-cigarettes has spurred outcry from health and medical professional groups, as well as the Food and Drug Administration (FDA), because of the unknown effects on public health. Inhabiting a realm of products deemed "tobacco products" under recent 2009 legislation, e-cigarettes pose new challenges to FDA regulation because of their novel method of nicotine delivery, various mechanical and electrical parts, and nearly nonexistent safety data. Consumer use, marketing and promotional claims, and technological characteristics of e-cigarettes have also raised decades old questions of when the FDA can assert authority over products as drugs or medical devices. Recent case law restricting FDA enforcement efforts against e-cigarettes further confounds the distinction among drugs and medical devices, emerging e-cigarette products, and traditional tobacco products such as cigarettes, cigars, and smokeless tobacco. This Article investigates the e-cigarette phenomenon in the wake of the recently enacted Family Smoking Prevention and Tobacco Control Act of 2009

  14. The safety regulation of small-scale coal mines in China: Analysing the interests and influences of stakeholders

    International Nuclear Information System (INIS)

    Song, Xiaoqian; Mu, Xiaoyi

    2013-01-01

    Small scale coal mines (SCMs) have played an important role in China’s energy supply. At the same time, they also suffer from many social, economic, environmental, and safety problems. The Chinese government has made considerable efforts to strengthen the safety regulation of the coal mining industry. Yet, few of these efforts have proven to be very effective. This paper analyzes the interests and influences of key stakeholders in the safety regulation of SCMs, which includes the safety regulator, the local government, the mine owner, and mineworkers. We argue that the effective regulation of coal mine safety must both engage and empower mineworkers. - Highlights: ► Small scale coal mines have played an important role in China's energy supply. ► We analyze the interests and influences of key stakeholders in the safety regulation of small coal mines. ► The mineworkers have the strongest interest but least influence. ► An effective regulation must engage the mineworkers, organize, and empower them.

  15. NRC safety research in support of regulation--FY 1989

    International Nuclear Information System (INIS)

    1990-04-01

    This report, the fifth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1989. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

  16. NRC safety research in support of regulation, FY 1991

    International Nuclear Information System (INIS)

    1992-04-01

    This report, the seventh in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1991. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

  17. NRC safety research in support of regulation, FY 1990

    International Nuclear Information System (INIS)

    1991-04-01

    This report, the sixth in a series of annual reports, was prepared in response to congressional inquiries concerning how nuclear regulatory research is used. It summarizes the accomplishments of the Office of Nuclear Regulatory Research during FY 1990. The goal of this office is to ensure that safety-related research provides the technical bases for rulemaking and for related decisions in support of NRC licensing and inspection activities. This research is necessary to make certain that the regulations that are imposed on licensees provide an adequate margin of safety so as to protect the health and safety of the public. This report describes both the direct contributions to scientific and technical knowledge with regard to nuclear safety and their regulatory applications

  18. Radiation Safety of Gamma, Electron and X Ray Irradiation Facilities. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2015-01-01

    The objective of this Safety Guide is to provide recommendations on how to meet the requirements of the BSS with regard to irradiation facilities. This Safety Guide provides specific, practical recommendations on the safe design and operation of gamma, electron and X ray irradiators for use by operating organizations and the designers of these facilities, and by regulatory bodies. SCOPE. The facilities considered in this publication include five types of irradiator, whether operated on a commercial basis or for research and development purposes. This publication is concerned with radiation safety issues and not with the uses of irradiators, nor does it cover the irradiation of product or its quality management. The five types of irradiator are: - Panoramic dry source storage irradiators; - Underwater irradiators, in which both the source and the product being irradiated are under water; - Panoramic wet source storage irradiators; - Electron beam irradiation facilities, in which irradiation is performed in an area that is potentially accessible to personnel, but that is kept inaccessible during the irradiation process; - X ray irradiation facilities, in which irradiation is performed in an area that is potentially accessible to personnel, but that is kept inaccessible during the irradiation process. Consideration of non-radiation-related risks and of the benefits resulting from the operation of irradiators is outside the scope of this Safety Guide. The practices of radiotherapy and radiography are also outside the scope of this Safety Guide. Category I gamma irradiators (i.e. 'self-shielded' irradiators) are outside the scope of this Safety Guide

  19. Identification of Patient Safety Risks Associated with Electronic Health Records: A Software Quality Perspective.

    Science.gov (United States)

    Virginio, Luiz A; Ricarte, Ivan Luiz Marques

    2015-01-01

    Although Electronic Health Records (EHR) can offer benefits to the health care process, there is a growing body of evidence that these systems can also incur risks to patient safety when developed or used improperly. This work is a literature review to identify these risks from a software quality perspective. Therefore, the risks were classified based on the ISO/IEC 25010 software quality model. The risks identified were related mainly to the characteristics of "functional suitability" (i.e., software bugs) and "usability" (i.e., interface prone to user error). This work elucidates the fact that EHR quality problems can adversely affect patient safety, resulting in errors such as incorrect patient identification, incorrect calculation of medication dosages, and lack of access to patient data. Therefore, the risks presented here provide the basis for developers and EHR regulating bodies to pay attention to the quality aspects of these systems that can result in patient harm.

  20. The electron test accelerator safety in design and operation

    International Nuclear Information System (INIS)

    McKeown, J.

    1980-06-01

    The Electron Test Accelerator is being designed as an experiment in accelerator physics and technology. With an electron beam power of up to 200 kW the operation of the accelerator presents a severe radiation hazard as well as rf and electrical hazards. The design of the safety system provides fail-safe protection while permitting flexibility in the mode of operation and minimizing administrative controls. (auth)

  1. Insights into the post-transcriptional regulation of the mitochondrial electron transport chain.

    Science.gov (United States)

    Sirey, Tamara M; Ponting, Chris P

    2016-10-15

    The regulation of the mitochondrial electron transport chain is central to the control of cellular homeostasis. There are significant gaps in our understanding of how the expression of the mitochondrial and nuclear genome-encoded components of the electron transport chain are co-ordinated, and how the assembly of the protein complexes that constitute the electron transport chain are regulated. Furthermore, the role post-transcriptional gene regulation may play in modulating these processes needs to be clarified. This review summarizes the current knowledge regarding the post-transcriptional gene regulation of the electron transport chain and highlights how noncoding RNAs may contribute significantly both to complex electron transport chain regulatory networks and to mitochondrial dysfunction. © 2016 The Author(s).

  2. Safety regulation: The lessons of workplace safety rule management for managing the regulatory burden

    OpenAIRE

    Hale, A.R.; Borys, D.; Adams, M.

    2012-01-01

    There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal regulations and reduce the regulatory burden. The authors were commissioned to prepare a discussion paper on this issue by the Mercatus Center of George Mason University in Arlington, Virginia, aimed pa...

  3. NRC - regulator of nuclear safety

    International Nuclear Information System (INIS)

    1997-01-01

    The U.S. Nuclear Regulatory Commission (NRC) was formed in 1975 to regulate the various commercial and institutional uses of nuclear energy, including nuclear power plants. The agency succeeded the Atomic Energy Commission, which previously had responsibility for both developing and regulating nuclear activities. Federal research and development work for all energy sources, as well as nuclear weapons production, is now conducted by the U.S. Department of Energy. Under its responsibility to protect public health and safety, the NRC has three principal regulatory functions: (1) establish standards and regulations, (2) issue licenses for nuclear facilities and users of nuclear materials, and (3) inspect facilities and users of nuclear materials to ensure compliance with the requirements. These regulatory functions relate to both nuclear power plants and to other uses of nuclear materials - like nuclear medicine programs at hospitals, academic activities at educational institutions, research work, and such industrial applications as gauges and testing equipment. The NRC places a high priority on keeping the public informed of its work. The agency recognizes the interest of citizens in what it does through such activities as maintaining public document rooms across the country and holding public hearings, public meetings in local areas, and discussions with individuals and organizations

  4. Classification of research reactors and discussion of thinking of safety regulation based on the classification

    International Nuclear Information System (INIS)

    Song Chenxiu; Zhu Lixin

    2013-01-01

    Research reactors have different characteristics in the fields of reactor type, use, power level, design principle, operation model and safety performance, etc, and also have significant discrepancy in the aspect of nuclear safety regulation. This paper introduces classification of research reactors and discusses thinking of safety regulation based on the classification of research reactors. (authors)

  5. Advisory material for the IAEA regulations for the safe transport of radioactive material. Safety guide

    International Nuclear Information System (INIS)

    2008-01-01

    Since the first edition in 1961, the Regulations for the Safe Transport of Radioactive Material of the IAEA (IAEA Regulations) have served as the basis of safety for the transport of radioactive material worldwide. In the discussions leading to the first edition of the IAEA Regulations, it was realized that there was need for a publication to supplement the Regulations which could give information of individual provisions as to their purpose, their scientific background and how to apply them in practice. In response, the Agency published Safety Series No. 7, entitled, in its first edition in 1961, 'Notes on Certain Aspects of the Regulations'. An additional source of information on the Regulations, providing advice on 'how' the user should comply with them which could be augmented from time to time in the light of latest experience, was provided by the Agency, initially in relation to the 1973 edition of the Regulations. This was entitled 'Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material' and designated Safety Series No. 37. This document is the result of combining the two Safety Series in a single publication. Thus the primary purpose of this publication is to provide guidance to users on proven and acceptable ways of complying with the Regulations. This Advisory Material is not a stand-alone text and it only has significance when used as a companion to the IAEA Safety Standards Series No. ST-1, Regulations for the Safe Transport of Radioactive Material (1996 edition)

  6. Safety practice and regulations in different IGORR member countries

    International Nuclear Information System (INIS)

    Hickman, C.; Minguet, J.L.; Arnould, F.

    1999-01-01

    In the suggestions of the 1996 IGORR 5 conference, Technicatome proposed 'Comparing Regulations for Research Reactors in Participating Countries'. The aim was to enhance and facilitate the dissemination of pertinent information amongst potential utilities of operational research reactors. A questionnaire on the following topics was subsequently sent out to IGORR 5 participants : Procedures for Research Reactors and Associated Equipment, Safety Analysis, Safety Related Components, Radiation Protection and Management of Nuclear materials. The objective of the present paper is to identify major trends, similarities and differences in the approaches adopted by different countries. Its scope has been limited to: Licensing and Regulatory approach; Operating and Safety documents; Safety Analysis; Radiological Safety; Management of Nuclear Materials. The investigations carried out indicate that to a large extent international recommendations (IAEA, ICPR,..) are being followed and that there is a general tendency to integrate them into national legislation and regulations. Although Safety Culture varies from one country to another an overall general consensus exists on the basic approach to safety inasmuch as: different countries have their own legally defined Safety Authorities, a Preliminary Safety Report is required before a research reactor can be built, and a final Safety Report before the core can be loaded with nuclear fuel and the reactor made critical; these documents must be accepted by the Safety Authorities concerned; a combination of defense-in-depth strategy (deterministic approach) and probabilistic analysis is applied; three or more safety classes are used to categorize systems and components; the single failure criterion is taken into consideration for systems and components having safety functions; both Operating Basis and Safety Shutdown type earthquakes are considered; the crashing of an aircraft onto a research reactor is taken into consideration

  7. Nuclear safety regulation in the People's Republic of China

    International Nuclear Information System (INIS)

    Shi Guangchang

    1987-01-01

    The present report gives a general view of how the problem of nuclear safety is dealt with in China, with particular reference to the nuclear power plants. The most relevant nuclear legal regulations and procedures are reported. Organization of the National Nuclear Safety Administration (NNSA) of China and its working activities are presented. The report gives also the principle and practice with regard to licensing process and regulatory inspection of nuclear power plant in China. (author)

  8. International Nuclear Officials Discuss IAEA Peer Reviews of Nuclear Safety Regulations

    International Nuclear Information System (INIS)

    2011-01-01

    Full text: Senior nuclear regulators today concluded a Workshop on the Lessons Learned from the IAEA Integrated Regulatory Review Service (IRRS) Missions. The U.S. Nuclear Regulatory Commission (NRC) hosted the workshop, in cooperation with the International Atomic Energy Agency, in Washington, DC, from 26 to 28 October 2011. About 60 senior regulators from 22 IAEA Member States took part in this workshop. The IRRS programme is an international peer review service offered by the IAEA to its Member States to provide an objective evaluation of their nuclear safety regulatory framework. The review is based on the internationally recognized IAEA Safety Standards. ''The United States Nuclear Regulatory Commission was pleased to host the IAEA's IRRS meeting this week. The discussions over the past three days have provided an important opportunity for regulators from many countries to come together to strengthen the international peer review process,'' said U.S. NRC Chairman Gregory B. Jaczko. ''Especially after the Fukushima Daiichi accident, the global community recognizes that IRRS missions fill a vital role in strengthening nuclear safety and security programs around the world, and we are proud to be a part of this important effort.'' The IAEA Action Plan on Nuclear Safety includes actions focused towards strengthening the existing IAEA peer reviews, incorporating lessons learned and improving their effectiveness. The workshop provided a platform for the exchange of information, experience and lessons learned from the IRRS missions, as well as expectations for the IRRS programme for the near future. Further improvements in the planning and implementation of the IRRS missions in the longer term were discussed. A strong commitment of all relevant national authorities to the IRRS programme was identified as a key element of an effective regulatory framework. The conclusions of the workshop will be issued in November 2011 and the main results will be reported to the IAEA

  9. Trends in food safety standards and regulation implications for developing countries

    OpenAIRE

    Caswell, Julie A.

    2003-01-01

    "Food safety is affected by the decisions of producers, processors, distributors, food service operators, and consumers, as well as by government regulations. In developed countries, the demand for higher levels of food safety has led to the implementation of regulatory programs that address more types of safety-related attributes (such as bovine spongiform encephalopathy (BSE), microbial pathogens, environmental contaminants, and animal drug and pesticide residues) and impose stricter standa...

  10. [Problems of safety regulation under radioactive waste management in Russia].

    Science.gov (United States)

    Monastyrskaia, S G; Kochetkov, O A; Barchukov, V G; Kuznetsova, L I

    2012-01-01

    Analysis of the requirements of Federal Law N 190 "About radioactive waste management and incorporation of changes into some legislative acts of the Russian Federation", as well as normative-legislative documents actual and planned to be published related to provision of radiation protection of the workers and the public have been done. Problems of safety regulation raised due to different approaches of Rospotrebnadzor, FMBA of Russia, Rostekhnadzor and Minprirody with respect to classification and categorization of the radioactive wastes, disposal, exemption from regulatory control, etc. have been discussed in the paper. Proposals regarding improvement of the system of safety regulation under radioactive waste management and of cooperation of various regulatory bodies have been formulated.

  11. Integrating environmental management into food safety and food packaging in Malaysia: review of the food regulation 1985

    Science.gov (United States)

    Nordin, N. H.; Hara, H.; Kaida, N.

    2017-05-01

    Food safety is an important issue that is related to public safety to prevent the toxicity threats of the food. Management through legal approach has been used in Malaysia as one of the predominant approaches to manage the environment. In this regard, the Food Regulation 1985 has been one of the mechanisms of environmental management through legal approach in controlling the safety of packaged food in food packaging industry in Malaysia. The present study aims to analyse and to explain the implementation of the Food Regulation 1985 in controlling the safety of packaged food in Malaysia and to integrate the concept of environmental management into the food safety issue. Qualitative analysis on the regulation document revealed that there are two main themes, general and specific, while their seven sub themes are included harmful packages, safety packages, reuse packages, polyvinyl chloride (PVC), alcoholic bottle, toys, money and others and iron powder. The implementation of the Food Regulation 1985 in controlling the safety of packaged food should not be regarded solely for regulation purposes but should be further developed for a broader sense of food safety from overcoming the food poisoning.

  12. Environmental Regulation and Food Safety: Studies of Protection ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    1 janv. 2006 ... Environmental Regulation and Food Safety intéressera les artisans des politiques et les ONG , les chercheurs et les spécialistes de l'économie ... This funding will help strengthen the Science, Technology and Innovation Policy Research Organization's (STIPRO) role as a credible public policy institution in ...

  13. Safety management and control policy. A study of the safety regulation of offshore oil activity by the Norwegian Petroleum Directorate. Sikkerhetsstyring og reguleringsteknikk. Oljedirektoratets regulering av sikkerheten ved produksjon av petroleum

    Energy Technology Data Exchange (ETDEWEB)

    Graver, H P

    1983-01-01

    The Norwegian Petroleum Directorate (NPD) is the main administrative body with responsibility to regulate and control the safety aspects of drilling for and production of petroleum on the Norwegian Continental Shelf. Its responsibility does not, however, include the aspects of maritime safety, which are regulated by the Norwegian Maritime Directorate. This study is limited to the regulation of safety on fixed installations for production of petroleum. The object has been to describe the methods applied by the NPD to achieve better safety, and to give answers to why these specific methods of approach have developed as they have. A conclusion that may be drawn from this study is that there exists a relationship of close cooperation between the NPD and the oil industry represented by the operating companies. Only this can explain the differences we find in the NPD approach as compared to the approach of other parts of public administration. Such a relationship probably leads to better safety within the scope of technical rationality than would have a more hostile relationship between the Directorate and the industry. This has its price, however. Aspects of the safety question not included within the limits of a purely technical approach are not as easily taken into account. Partly due to this fact, other parties with interests in safety are not represented.

  14. Safety regulation : The lessons of workplace safety rule management for managing the regulatory burden

    NARCIS (Netherlands)

    Hale, A.R.; Borys, D.; Adams, M.

    2012-01-01

    There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal

  15. Co-operative development of nuclear safety regulations, guides and standards based on NUSS

    International Nuclear Information System (INIS)

    Pachner, J.; Boyd, F.C.; Yaremy, E.M.

    1985-01-01

    A major need of developing Member States building nuclear power plants (NPPs) of foreign origin is to acquire a capability to regulate such nuclear plants independently. Among other things, this requires the development of national nuclear safety regulations, guides and standards to govern the development and use of nuclear technology. Recognizing the importance and complexity of this task, it seems appropriate that the NPP-exporting Member States share their experience and assist the NPP-importing Member States in the development of their national regulations and guides. In 1983, the Atomic Energy Control Board and Atomic Energy of Canada Ltd. conducted a study of a possible joint programme involving Canada, an NPP-importing Member State and the IAEA for the development of the national nuclear safety regulations and guides based on NUSS documents. During the study, a work plan with manpower estimates for the development of design regulations, safety guides and a guide for regulatory evaluation of design was prepared as an investigatory exercise. The work plan suggests that a successful NUSS implementation in developing Member States will require availability of significant resources at the start of the programme. The study showed that such a joint programme could provide an effective mechanism for transfer of nuclear safety know-how to the developing Member States through NUSS implementation. (author)

  16. Safer electronic health records safety assurance factors for EHR resilience

    CERN Document Server

    Sittig, Dean F

    2015-01-01

    This important volume provide a one-stop resource on the SAFER Guides along with the guides themselves and information on their use, development, and evaluation. The Safety Assurance Factors for EHR Resilience (SAFER) guides, developed by the editors of this book, identify recommended practices to optimize the safety and safe use of electronic health records (EHRs). These guides are designed to help organizations self-assess the safety and effectiveness of their EHR implementations, identify specific areas of vulnerability, and change their cultures and practices to mitigate risks.This book pr

  17. The Challenges of Electronic Health Records and Diabetes Electronic Prescribing: Implications for Safety Net Care for Diverse Populations

    Directory of Open Access Journals (Sweden)

    Neda Ratanawongsa

    2017-01-01

    Full Text Available Widespread electronic health record (EHR implementation creates new challenges in the diabetes care of complex and diverse populations, including safe medication prescribing for patients with limited health literacy and limited English proficiency. This review highlights how the EHR electronic prescribing transformation has affected diabetes care for vulnerable patients and offers recommendations for improving patient safety through EHR electronic prescribing design, implementation, policy, and research. Specifically, we present evidence for (1 the adoption of RxNorm; (2 standardized naming and picklist options for high alert medications such as insulin; (3 the widespread implementation of universal medication schedule and language-concordant labels, with the expansion of electronic prescription 140-character limit; (4 enhanced bidirectional communication with pharmacy partners; and (5 informatics and implementation research in safety net healthcare systems to examine how EHR tools and practices affect diverse vulnerable populations.

  18. Regulating plant physiology with organic electronics.

    Science.gov (United States)

    Poxson, David J; Karady, Michal; Gabrielsson, Roger; Alkattan, Aziz Y; Gustavsson, Anna; Doyle, Siamsa M; Robert, Stéphanie; Ljung, Karin; Grebe, Markus; Simon, Daniel T; Berggren, Magnus

    2017-05-02

    The organic electronic ion pump (OEIP) provides flow-free and accurate delivery of small signaling compounds at high spatiotemporal resolution. To date, the application of OEIPs has been limited to delivery of nonaromatic molecules to mammalian systems, particularly for neuroscience applications. However, many long-standing questions in plant biology remain unanswered due to a lack of technology that precisely delivers plant hormones, based on cyclic alkanes or aromatic structures, to regulate plant physiology. Here, we report the employment of OEIPs for the delivery of the plant hormone auxin to induce differential concentration gradients and modulate plant physiology. We fabricated OEIP devices based on a synthesized dendritic polyelectrolyte that enables electrophoretic transport of aromatic substances. Delivery of auxin to transgenic Arabidopsis thaliana seedlings in vivo was monitored in real time via dynamic fluorescent auxin-response reporters and induced physiological responses in roots. Our results provide a starting point for technologies enabling direct, rapid, and dynamic electronic interaction with the biochemical regulation systems of plants.

  19. Radiation sources safety and radioactive materials security regulation in Ukraine

    International Nuclear Information System (INIS)

    Smyshliaiev, A.; Holubiev, V.; Makarovska, O.

    2001-01-01

    Radiation sources are widely used in Ukraine. There are about 2500 users in industry, science, education and about 2800 in medicine. About 80,000 sealed radiation sources with total kerma-equivalent of 450 Gy*M 2 /sec are used in Ukraine. The exact information about the radiation sources and their users will be provided in 2001 after the expected completion of the State inventory of radiation sources in Ukraine. In order to ensure radiation source safety in Ukraine, a State System for regulation of activities dealing with radiation sources has been established. The system includes the following elements: establishment of norms, rules and standards of radiation safety; authorization activity, i.e. issuance of permits (including those in the form of licences) for activities dealing with radiation sources; supervisory activity, i.e. control over observance of norms, rules and standards of radiation safety and fulfilment of conditions of licences for activities dealing with radiation sources, and also enforcement. Comprehensive nuclear legislation was developed and implemented from 1991 to 2000. Radiation source safety is regulated by three main nuclear laws in Ukraine: On the use of nuclear energy and radiation safety (passed on 8 February 1995); On Human Protection from Impact of Ionizing Radiation (passed on 14 January 1998); On permissive activity in the area of nuclear energy utilization (passed on 11 January 2000). The regulatory authorities in Ukraine are the Ministry for Ecology and Natural Resources (Nuclear Regulatory Department) and the Ministry of Health (State sanitary-epidemiology supervision). According to the legislation, activities dealing with radiation sources are forbidden without an officially issued permit in Ukraine. Permitted activities with radiation sources are envisaged: licensing of production, storage and maintenance of radiation sources; licensing of the use of radiation sources; obligatory certification of radiation sources and transport

  20. Preparing Safety Cases for Operating Outside Prescriptive Fatigue Risk Management Regulations.

    Science.gov (United States)

    Gander, Philippa; Mangie, Jim; Wu, Lora; van den Berg, Margo; Signal, Leigh; Phillips, Adrienne

    2017-07-01

    Transport operators seeking to operate outside prescriptive fatigue management regulations are typically required to present a safety case justifying how they will manage the associated risk. This paper details a method for constructing a successful safety case. The method includes four elements: 1) scope (prescriptive rules and operations affected); 2) risk assessment; 3) risk mitigation strategies; and 4) monitoring ongoing risk. A successful safety case illustrates this method. It enables landing pilots in 3-pilot crews to choose the second or third in-flight rest break, rather than the regulatory requirement to take the third break. Scope was defined using a month of scheduled flights that would be covered (N = 4151). These were analyzed in the risk assessment using existing literature on factors affecting fatigue to estimate the maximum time awake at top of descent and sleep opportunities in each break. Additionally, limited data collected before the new regulations showed that pilots flying at landing chose the third break on only 6% of flights. A prospective survey comparing subjective reports (N = 280) of sleep in the second vs. third break and fatigue and sleepiness ratings at top of descent confirmed that the third break is not consistently superior. The safety case also summarized established systems for fatigue monitoring, risk assessment and hazard identification, and multiple fatigue mitigation strategies that are in place. Other successful safety cases have used this method. The evidence required depends on the expected level of risk and should evolve as experience with fatigue risk management systems builds.Gander P, Mangie J, Wu L, van den Berg M, Signal L, Phillips A. Preparing safety cases for operating outside prescriptive fatigue risk management regulations. Aerosp Med Hum Perform. 2017; 88(7):688-696.

  1. Neonatal Nurses Experience Unintended Consequences and Risks to Patient Safety With Electronic Health Records.

    Science.gov (United States)

    Dudding, Katherine M; Gephart, Sheila M; Carrington, Jane M

    2018-04-01

    In this article, we examine the unintended consequences of nurses' use of electronic health records. We define these as unforeseen events, change in workflow, or an unanticipated result of implementation and use of electronic health records. Unintended consequences experienced by nurses while using electronic health records have been well researched. However, few studies have focused on neonatal nurses, and it is unclear to what extent unintended consequences threaten patient safety. A new instrument called the Carrington-Gephart Unintended Consequences of Electronic Health Record Questionnaire has been validated, and secondary analysis using the tool explored the phenomena among neonatal nurses (N = 40). The purposes of this study were to describe unintended consequences of use of electronic health records for neonatal nurses and to explore relationships between the phenomena and characteristics of the nurse and the electronic health record. The most frequent unintended consequences of electronic health record use were due to interruptions, followed by a heavier workload due to the electronic health record, changes to the workflow, and altered communication patterns. Neonatal nurses used workarounds most often with motivation to better assist patients. Teamwork was moderately related to higher unintended consequences including patient safety risks (r = 0.427, P = .007), system design (r = 0.419, P = .009), and technology barriers (r = 0.431, P = .007). Communication about patients was reduced when patient safety risks were high (r = -0.437, P = .003). By determining the frequency with which neonatal nurses experience unintended consequences of electronic health record use, future research can be targeted to improve electronic health record design through customization, integration, and refinement to support patient safety and better outcomes.

  2. Challenges in developing competency-based training curriculum for food safety regulators in India

    Directory of Open Access Journals (Sweden)

    Anitha Thippaiah

    2014-01-01

    Full Text Available Context: The Food Safety and Standards Act have redefined the roles and responsibilities of food regulatory workforce and calls for highly skilled human resources as it involves complex management procedures. Aims: 1 Identify the competencies needed among the food regulatory workforce in India. 2 Develop a competency-based training curriculum for food safety regulators in the country. 3 Develop training materials for use to train the food regulatory workforce. Settings and Design: The Indian Institute of Public Health, Hyderabad, led the development of training curriculum on food safety with technical assistance from the Royal Society for Public Health, UK and the National Institute of Nutrition, India. The exercise was to facilitate the implementation of new Act by undertaking capacity building through a comprehensive training program. Materials and Methods: A competency-based training needs assessment was conducted before undertaking the development of the training materials. Results: The training program for Food Safety Officers was designed to comprise of five modules to include: Food science and technology, Food safety management systems, Food safety legislation, Enforcement of food safety regulations, and Administrative functions. Each module has a facilitator guide for the tutor and a handbook for the participant. Essentials of Food Hygiene-I (Basic level, II and III (Retail/ Catering/ Manufacturing were primarily designed for training of food handlers and are part of essential reading for food safety regulators. Conclusion: The Food Safety and Standards Act calls for highly skilled human resources as it involves complex management procedures. Despite having developed a comprehensive competency-based training curriculum by joint efforts by the local, national, and international agencies, implementation remains a challenge in resource-limited setting.

  3. Basic concept on safety regulation for land disposal of low level radioactive solid wastes

    International Nuclear Information System (INIS)

    1985-01-01

    As to the land disposal of low level radioactive solid wastes, to which the countermeasures have become the urgent problem at present, it is considered to be a realistic method to finally store the solid wastes concentratedly outside the sites of nuclear power stations and others, and effort has been exerted by those concerned to realize it. Besides, as for extremely low level radioactive solid wastes, the measures of disposing them corresponding to the radioactivity level are necessary, and the concrete method has been examined. The Committee on Safety Regulation for Radioactive Wastes has discussed the safety regulation for those since April, 1984, and the basic concept on the safety regulation was worked up. It is expected that the safety of the land disposal of low level radioactive solid wastes can be ensured when the safety regulation is carried out in conformity with this basic concept. The present status of the countermeasures to the land disposal of low level radioactive solid wastes is shown. As the concrete method, the disposal in shallow strate has been generally adopted. At present, the plan for the final storage in Aomori Prefecture is considered, and it will be started with the first stage of four-stage control. (Kako, I.)

  4. Design of Control System Device for Electron Gun Power Supply of 350 keV/10 mA Electron Beam Machine

    International Nuclear Information System (INIS)

    Eko Priyono; Budi Santosa; Taxwim

    2003-01-01

    The electron gun power supply control system of electron beam machine has been designed. Using this design regulator device for the electron gun power supply will be constructed. This regulator device was designed that it can be operated manually or automatically. Beside that, this was also provided with the safety system which is useful to scram the MBE when something wrong happened. The main components of the device are remote data communication system using infra red and fiber optic module, DC motor driver system, regulated transformer coupled by DC motor and operation panel system. (author)

  5. Labelling of electronic cigarettes: regulations and current practice.

    Science.gov (United States)

    Buonocore, Federico; Marques Gomes, Ana C N; Nabhani-Gebara, Shereen; Barton, Stephen J; Calabrese, Gianpiero

    2017-01-01

    Over the past decade e-cigarettes have established themselves in the global market. E-cigarettes triggered much interest in relation to their content and efficacy as smoking cessation tools, but less attention has been paid to users and environmental safety warnings and guidance. Several regulations have been introduced to promote their safe handling and disposal. From May 2016, liquids and cartridges will be regulated by European Community Directives (ECDs) 2001/83/EC and 93/42/EEC, or 2014/40/EU if marketed as tobacco-related products. Currently, manufacturers and distributors must abide by the Chemical (Hazard Information and Packaging for Supply) Regulations 2009 (CHIP) or Classification, Labelling and Packaging Regulations (CLP), the latter replacing CHIP in June 2015. In this work, the compliance of marketed e-liquids and e-cigarettes with current European Union and UK legislations is assessed. E-liquids and e-cigarettes (21 and 9 brands, respectively) were evaluated. Evidence of non-compliance was found in relation to the CHIP/CLP toxic (13%) and environmental (37%) pictograms, tactile warning (23%), nominal amount of solution (30%), supplier contact telephone number and address (40%). None of the evaluated e-cigarettes displayed information on the correct disposal/recycling of batteries in line with the ECD 2006/66/EC. More stringent enforcement of regulations is needed to ensure not only the user's safety and awareness, but also the safeguarding of the environment. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  6. JICST Factual DatabaseJICST Chemical Substance Safety Regulation Database

    Science.gov (United States)

    Abe, Atsushi; Sohma, Tohru

    JICST Chemical Substance Safety Regulation Database is based on the Database of Safety Laws for Chemical Compounds constructed by Japan Chemical Industry Ecology-Toxicology & Information Center (JETOC) sponsored by the Sience and Technology Agency in 1987. JICST has modified JETOC database system, added data and started the online service through JOlS-F (JICST Online Information Service-Factual database) in January 1990. JICST database comprises eighty-three laws and fourteen hundred compounds. The authors outline the database, data items, files and search commands. An example of online session is presented.

  7. The regulation of peculiarities of electronic contracting: comparative analysis

    Directory of Open Access Journals (Sweden)

    Наталія Юліївна Філатова

    2017-12-01

    Full Text Available Contract formation by electronic means nowadays is a widespread phenomenon. Nevertheless electronic contracting has been thoroughly explored by scholars all over the world and regulated both internationally and domestically, there still remain some issues which need to be carefully analyzed. In our view, the most essential question raised by electronic contracting is whether there is a need to amend substantial contract law provisions with regard to peculiarities of contracts concluded by electronic means. Seeking the answer to this question several approaches have been formulated, but none of them seems to be completely appropriate. In this paper the answer is also attempted to be found. For this purpose a comparative analysis of doctrine, legislation and judicial practice of certain states is performed. Particularly, offer, acceptance and moment of electronic contract formation are explored. On the basis of this research the following conclusion is done: amendments to substantial contract law provisions are not always necessary to improve the regulation of electronic contracting. Nevertheless the provisions of law should be applied correctly to the disputes arising from electronic contract formation taking into account the peculiarities of such contracts.

  8. 77 FR 6007 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

    Science.gov (United States)

    2012-02-07

    ...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... they could be published in the Federal Register. This notice lists temporary safety zones, security... the safety and security needs within their jurisdiction; therefore, District Commanders and COTPs have...

  9. 33 CFR 165.117 - Regulated Navigation Areas, Safety and Security Zones: Deepwater Ports, First Coast Guard District.

    Science.gov (United States)

    2010-07-01

    ..., Safety and Security Zones: Deepwater Ports, First Coast Guard District. 165.117 Section 165.117... Limited Access Areas First Coast Guard District § 165.117 Regulated Navigation Areas, Safety and Security... section are designated as regulated navigation areas. (2) Safety and security zones. All waters within a...

  10. International experts conclude IAEA peer review of Iran's safety regulation of Bushehr NPP

    International Nuclear Information System (INIS)

    2010-01-01

    Full text: An international team of nuclear safety experts today completed an IAEA mission to review the effectiveness of Iran's safety regulation of its first nuclear power plant and to identify possible improvements before the plant begins operation. Upon invitation of the Islamic Republic of Iran, the International Atomic Energy Agency (IAEA) assembled a team of senior regulators from seven Member States for an Integrated Regulatory Review Service (IRRS) mission. The scope of the mission was limited to the safety regulation of Bushehr nuclear power plant (BNPP-1). The IRRS review took place from 20 February to 2 March at the INRA offices in Tehran and included a technical visit to the BNPP-1 site. The mission was an objective peer review based on IAEA safety standards, and was neither an inspection, nor an audit. Ms. Olena Mykolaichuk, IRRS Team Leader and Head of the State Nuclear Regulatory Committee of Ukraine, commended her INRA counterparts: 'The regulatory work performed on the Bushehr construction and in preparation for commissioning has demonstrated significant progress of INRA as a nuclear regulatory authority,' she said. Philippe Jamet, Director of the IAEA's Nuclear Installation Safety Division, added: 'Through this IRRS mission, both Iran and the international experts contribute to the enhancement of nuclear safety and worldwide experience sharing.' In the course of its review the IRRS team identified the following strengths: - INRA has a dedicated, conscientious staff, demonstrating clear commitments to further improvements. - INRA clearly recognizes the value of peer reviews and international cooperation regarding nuclear safety. - Despite a shortage of staff, INRA demonstrated strong leadership while performing both review and assessment and inspection tasks during the BNPP-1 construction and pre-commissioning. - INRA has developed an excellent computerized documentation control system. Recommendations and suggestions to improve INRA's regulatory

  11. Regulation of Aging Power Plants: Ensuring Safety in a Changing Environment

    International Nuclear Information System (INIS)

    Jackson, S.A.

    1999-01-01

    In her keynote address to the Plim and Plex 1997 Conference, Dr. Jackson, President of the US Nuclear Regulatory Commission, dealt with four problem areas: (i) the development and application of safety margins; (ii) aging mechanisms and the use of inspection and testing methods; (iii) the U. S. licence renewal process; and (iv) risk-informed, performance-based regulation. Aging effects can further complicate existing interactions between 'explicit' and 'implicit' safety margins. Attempting to satisfy these combined margins can have a significant technical and financial impact on the plant operator. Aging degradation affects a broad range of plant systems, structures and components. Inspection and testing methods are improved continually, but development of methods for direct measuring of material properties on a more microscopic level together with elaboration of more precise predictive models of aging is still needed. In the U. S., the decision on whether to seek licence renewal rests with the licensee. The NRC task is to establish a reasonable process and clear safety standards. License renewal (extension of a NPP 40-years operating licence for additional 20 years) is explicitly allowed in NRS regulations in 10 CFR Part 54. In the U. S. nuclear power industry, there is considerable interest in licence renewal. A 'risk informed' approach to regulation means that, in the decision-making, the risk information is considered along with other factors. Performance-based regulation is, by definition, results focused; its essential component is the feedback of operating experience into subsequent evaluation. When the results focus is linked to risk analysis and ranking, the result is risk-informed, performance-based regulation. The NRS applies this combined approach in all its activities and, also, in its collaborative programs with the nuclear power industry. At the threshold of the 21st century, the nuclear power industry faces an array of challenges and opportunities

  12. GENERAL CONSIDERATIONS ON REGULATIONS AND SAFETY REQUIREMENTS FOR QUADRICYCLES

    Directory of Open Access Journals (Sweden)

    Ana Pavlovic

    2015-12-01

    Full Text Available In recent years, a new class of compact vehicles has been emerging and wide-spreading all around Europe: the quadricycle. These four-wheeled motor vehicles, originally derived from motorcycles, are a small and fuel-efficient mean of transportation used in rural or urban areas as an alternative to motorbikes or city cars. In some countries, they are also endorsed by local authorities and institutions which support small and environmentally-friendly vehicles. In this paper, several general considerations on quadricycles will be provided including the vehicle classification, evolution of regulations (as homologation, driver licence, emissions, etc, technical characteristics, safety requirements, most relevant investigations, and other additional useful information (e.g. references, links. It represents an important and actual topic of investigation for designers and manufacturers considering that the new EU regulation on the approval and market surveillance of quadricycles will soon enter in force providing conclusive requirements for functional safety environmental protection of these promising vehicles.

  13. Regulation of chemical safety at fuel cycle facilities by the United States Nuclear Regulatory Commission

    International Nuclear Information System (INIS)

    Ramsey, Kevin M.

    2013-01-01

    When the U.S. Nuclear Regulatory Commission (NRC) was established in 1975, its regulations were based on radiation dose limits. Chemical hazards rarely influenced NRC regulations. After the Three Mile Island reactor accident in 1979, the NRC staff was directed to address emergency planning at non-reactor facilities. Several fuel cycle facilities were ordered to submit emergency plans consistent with reactor emergency plans because no other guidance was available. NRC published a notice that it was writing regulations to codify the requirements in the Orders and upgrade the emergency plans to address all hazards, including chemical hazards. The legal authority of NRC to regulate chemical safety was questioned. In 1986, an overfilled uranium hexafluoride cylinder ruptured and killed a worker. The NRC staff was directed to address emergency planning for hazardous chemicals in its regulations. The final rule included a requirement for fuel cycle facilities to certify compliance with legislation requiring local authorities to establish emergency plans for hazardous chemicals. As with emergency planning, NRC's authority to regulate chemical safety during routine operations was limited. NRC established memoranda of understanding (MOUs) with other regulatory agencies to encourage exchange of information between the agencies regarding occupational hazards. In 2000, NRC published new, performance-based, regulations for fuel cycle facilities. The new regulations required an integrated safety analysis (ISA) which used quantitative standards to assess chemical exposures. Some unique chemical exposure cases were addressed while implementing the new regulations. In addition, some gaps remain in the regulation of hazardous chemicals at fuel cycle facilities. The status of ongoing efforts to improve regulation of chemical safety at fuel cycle facilities is discussed. (authors)

  14. 76 FR 70342 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

    Science.gov (United States)

    2011-11-14

    ...] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation... published in the Federal Register. This notice lists temporary safety zones, security zones, special local... Commanders and Captains of the Port (COTP) must be immediately responsive to the safety and security needs...

  15. The safety and regulation of natural products used as foods and food ingredients.

    Science.gov (United States)

    Abdel-Rahman, Ali; Anyangwe, Njwen; Carlacci, Louis; Casper, Steve; Danam, Rebecca P; Enongene, Evaristus; Erives, Gladys; Fabricant, Daniel; Gudi, Ramadevi; Hilmas, Corey J; Hines, Fred; Howard, Paul; Levy, Dan; Lin, Ying; Moore, Robert J; Pfeiler, Erika; Thurmond, T Scott; Turujman, Saleh; Walker, Nigel J

    2011-10-01

    The use of botanicals and dietary supplements derived from natural substances as an adjunct to an improved quality of life or for their purported medical benefits has become increasingly common in the United States. This review addresses the safety assessment and regulation of food products containing these substances by the U.S. Food and Drug Administration (FDA). The issue of safety is particularly critical given how little information is available on the toxicity of some of these products. The first section uses case studies for stevia and green tea extracts as examples of how FDA evaluates the safety of botanical and herbal products submitted for consideration as Generally Recognized as Safe under the Federal Food, Drug, and Cosmetics Act. The 1994 Dietary Supplement Health Education Act (DSHEA) created a regulatory framework for dietary supplements. The article also discusses the regulation of this class of dietary supplements under DSHEA and addresses the FDA experience in analyzing the safety of natural ingredients described in pre-market safety submissions. Lastly, we discuss an ongoing interagency collaboration to conduct safety testing of nominated dietary supplements.

  16. Sor/88-391, 21 July 1988, uranium mines (Ontario) occupational health and safety regulations, amendment

    International Nuclear Information System (INIS)

    1988-08-01

    These Regulations (SOR/84-435) were made to establish uniformity in the laws governing occupational health and safety in mines in the Province of Ontario. To ensure conformity, the legal references in the Regulations have been amended to accord with the 1987 amendment of the Ontario Occupational Health and Safety Act [fr

  17. Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-22

    The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

  18. The role of the regulator in promoting and evaluating safety culture. Operating experience feedback programme approach

    International Nuclear Information System (INIS)

    Perez, S.

    2002-01-01

    Promoting and Evaluating Safety Culture (S.C.) in Operating Organizations must be one of the main Nuclear Regulator goals to achieve. This can be possible only if each and every one of the regulatory activities inherently involves S.C. It can be seen throughout attitudes, values, uses and practices in both individuals and the whole regulatory organization. One among all the regulatory tools commonly used by regulators to promote and evaluate the commitment of the licensees with safety culture as a whole involves organizational factors and particular attention is directed to the operating organization. This entailed a wide range of activities, including all those related with management of safety performance. Operating Experience Feedback Programme as a tool to enhance safety operation is particularly useful for regulators in the evaluation of the role of S.C. in operating organization. Safety Culture is recognized as a subset of the wider Organizational Culture. Practices that improve organizational effectiveness can also contribute to enhance safety. An effective event investigation methodology is a specific practice, which contributes to a healthy Safety Culture. (author)

  19. Society of Behavioral Medicine's (SBM) position on emerging policy issues regarding electronic nicotine delivery systems (ENDS): A need for regulation.

    Science.gov (United States)

    Rojewski, Alana M; Coleman, Nortorious; Toll, Benjamin A

    2016-09-01

    Electronic nicotine delivery systems (ENDS), commonly known as electronic cigarettes (or e-cigarettes), are widely available in the USA, yet almost entirely unregulated on a national level. Researchers are currently gathering data to understand the individual and public health effects of ENDS, as well as the role that ENDS may play in tobacco treatment. Given these uncertainties, regulatory efforts should be aimed at understanding and minimizing any potential harms of ENDS. The Society of Behavioral Medicine (SBM) supports stronger regulation of ENDS, incorporation of ENDS into clean air policies, and special consideration of safety standards to protect vulnerable populations. SBM also supports research on ENDS to guide policy decisions.

  20. 78 FR 49365 - Electronic Fund Transfers (Regulation E); Correction

    Science.gov (United States)

    2013-08-14

    ... BUREAU OF CONSUMER FINANCIAL PROTECTION 12 CFR Part 1005 [Docket No. CFPB-2012-0050] RIN 3170-AA33 Electronic Fund Transfers (Regulation E); Correction AGENCY: Bureau of Consumer Financial Protection. ACTION... 2013 Final Rule, which along with three other final rules \\1\\ implements the Electronic Fund Transfer...

  1. Harmonization of nuclear and radiation safety regulations for nuclear power plants with reference levels of Western European Nuclear Regulators Association (WENRA)

    International Nuclear Information System (INIS)

    Bojchuk, V.S.; Mikolajchuk, O.A.; Gromov, G.V.; Dibach, O.M.; Godovanyuk, G.M.; Nosovs'kij, A.V.

    2014-01-01

    Self-evaluation of the Ukrainian regulations on nuclear and radiation safety that apply to nuclear power plants for compliance with the reference levels of the Western European Nuclear Regulators Association (WENRA) is presented. Proposals on improvement of the regulations upon self-evaluation are provided

  2. INFLUENCE OF PLANNING, ORGANIZATIONAL CHARACTERISTICS AND REGULATION ON ROAD TRAFFIC SAFETY OF PEDESTRIANS

    Directory of Open Access Journals (Sweden)

    G. M. Kuharenok

    2011-01-01

    Full Text Available The paper presents results of research on planning, organizational characteristics and regulation modes at  the regulated pedestrian crossings, located out of crossroads in the street and road network of Minsk. Some regularities pertaining to the influence of the investigated characteristics on road traffic safety of pedestrians are revealed in the paper. Practical offers on increase of road traffic safety of pedestrians in the Republic of Belarus have been developed on the basis of the executed investigations and cited in the paper. 

  3. Providing current radiation safety according to new version of 'Ukrytie' object regulation

    International Nuclear Information System (INIS)

    Borovoj, A.A.; Vysotskij, E.D.; Krinitsyn, A.P.; Bogatov, S.A.

    1999-01-01

    Main provisions are given of the 'Ukryttia' object's Regulation related to provision of radiation safety during the object's operation. The safety is provided due to the realization by the object's personnel of functions of global monitoring of current radiation conditions, as well as of the measures of operative or preventive suppression of radiation abnormalities sources

  4. Transports of radioactive materials. Legal regulations, safety and security concepts, experience

    International Nuclear Information System (INIS)

    Schwarz, Guenther

    2012-01-01

    In Germany, approximately 650,000 to 750,000 units containing radioactive materials for scientific, medical and technical applications are shipped annually by surface, air and water transports. Legally speaking, radioactive materials are dangerous goods which can cause hazards to life, health, property and the environment as a result of faulty handling or accidents in transit. For protection against these hazards, their shipment therefore is regulated in extensive national and international rules of protection and safety. The article contains a topical review of the international and national transport regulations and codes pertaining to shipments of radioactive materials, and of the protection concepts underlying these codes so as to ensure an adequate standard of safety and security in shipping radioactive materials in national and international goods traffic. (orig.)

  5. A macromarketing perspective on food safety regulation

    DEFF Research Database (Denmark)

    Bech-Larsen, Tino; Aschemann-Witzel, Jessica

    2012-01-01

    of the major stakeholders in the Danish food marketing system. Adding to the literature on diffusion of regulatory initiatives, the analysis shows that the Danish ban on trans-fats had—and still has—an important impact on trans-fat regulation in other European and overseas countries. In the final section......This article discusses the implementation and diffusion of mandatory and voluntary food safety regulations from a marketing systems perspective, and specifically applies this framework to an analysis of the antecedents and implications of the Danish 2003 ban on trans-fatty acids (TFAs......). The analysis is based on reviews of published material and on interviews with food marketers, nutrition experts, and policy makers. It is established that the ban was implemented due to scientific proof of health risks associated with the intake of TFAs but also as a result of aligned interests and efforts...

  6. 76 FR 9646 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

    Science.gov (United States)

    2011-02-22

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Parts 100, 117, 147, and 165 [USCG-2010-0399] Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation Regulations and Regulated Navigation Areas AGENCY: Coast Guard, DHS. ACTION: Notice of expired temporary rules...

  7. Use of risk information to safety regulation. Fabrication facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    A procedure of ISA (Integrated Safety Analysis) for uranium fuel fabrication/enrichment facilities has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. There are two major activities in the year. First one is a study on ISA procedure for external events such as earthquakes. Second one is that for chemical consequences such as UF6 and HF. Other than the activities a fundamental study on a policy of utilizing risk information was conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

  8. Bases of updating of nuclear safety regulations for NPP in Romania

    International Nuclear Information System (INIS)

    Biro, Lucian; Serbanescu, Dan

    1999-01-01

    The paper presents the basic principles of reviewing and updating process of the regulatory environment pyramid. The main part of this review process refers to Cernavoda NPP Unit 2. However, there is an important impact on Cernavoda NPP Unit 1. The basic principles were defined in 1993/1994 when the licensing process for Unit 1 was resumed in order to be in accordance with the latest developments of Candu 600 worldwide and with the IAEA and NEA latest recommended documents and practices. After the licensing process for the Unit 1 was completed up to operation stage, CNCAN developed new updated regulations on nuclear safety and the regulatory pyramid in the framework of the RAMG PHARE project. CNCAN issued in 1996 the regulatory Policy for Unit 2, self-sustained and independent of future possible revisions of the regulations. The use of the concept of hierarchical systems, systematic review of safety criteria and objectives and margins along with the feedback from international and national experience on this topic ensured issuance of a reference document for future approach of nuclear safety in Romania. (authors)

  9. Cost-benefit comparison of nuclear and nonnuclear health and safety protective measures and regulations

    International Nuclear Information System (INIS)

    O'Donnell, E.P.; Mauro, J.J.

    1979-01-01

    This article compares the costs and benefits of health and safety measures and regulations in the nuclear and nonnuclear fields. A cost-benefit methodology for nuclear safety concerns is presented and applied to existing nuclear plant engineered safety features. Comparisons in terms of investment costs to achieve reductions in mortality rates are then made between nuclear plant safety features and the protective measures and regulations associated with nonnuclear risks, particularly with coal-fired power plants. These comparisons reveal a marked inconsistency in the cost effectiveness of health and safety policy, in which nuclear regulatory policy requires much greater investments to reduce the risk of public mortality than is required in nonnuclear areas where reductions in mortality rates could be achieved at much lower cost. A specific example of regulatory disparity regarding gaseous effluent limits for nuclear and fossil-fuel power plants is presented. It is concluded that a consistent health and safety regulatory policy based on uniform risk and cost-benefit criteria should be adopted and that future proposed Nuclear Regulatory Commission regulatory requirements should be critically evaluated from a cost-benefit viewpoint

  10. Regulation for delivery of subsidies for public relations and safety

    International Nuclear Information System (INIS)

    1984-01-01

    The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows: limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Mori, K.)

  11. Regulation for delivery of subsidies for public relations and safety

    International Nuclear Information System (INIS)

    1985-01-01

    The regulations provide for subsidies for the public relations activities and safety operations carried out by a local government for the local inhabitants in the vicinity of a nuclear power generation, etc. facility. This type of activity includes the dissemination of information on nuclear power, studies on securing the safety of the inhabitants and communication concerning the facility safety. The contents are as follows : limits of the subsidies, terms of subsidy allocations, the application for subsidies, determination of subsidy allocations, withdrawal of applications, the conditions to the allocations, a report on the work proceedings, a report on the results, confirmation on the sum of subsidies, withdrawal of the decision for subsidies, limitations for disposal of the properties, etc. (Kubozono, M.)

  12. Pesticide regulations and farm worker safety: the need to improve pesticide regulations in Viet Nam.

    Science.gov (United States)

    Phung, Dung Tri; Connell, Des; Miller, Greg; Rutherford, Shannon; Chu, Cordia

    2012-06-01

    Agricultural pesticide use in Viet Nam has more than tripled since 1990. However, pesticide legislation and regulations have not been developed in response to this large increase in usage, as a result of which pesticides pose a serious threat to human health and the environment. This paper identifies the need to improve pesticide regulations in Viet Nam through a comparative analysis of pesticide regulations in Viet Nam and the United States of America, where the rate of acute poisoning among agricultural workers is much lower than in Viet Nam and where information pertaining to pesticide regulations is made accessible to the public. The analysis identified several measures that would help to improve Viet Nam's pesticide regulations. These include enhancing pesticide legislation, clarifying the specific roles and active involvement of both the environmental and health sectors; performing a comprehensive risk-benefit evaluation of pesticide registration and management practices; improving regulations on pesticide suspension and cancellation, transport, storage and disposal; developing import and export policies and enhancing pesticide-related occupational safety programmes.

  13. The challenges for global harmonisation of food safety norms and regulations: issues for India.

    Science.gov (United States)

    Prakash, Jamuna

    2014-08-01

    Safe and adequate food is a human right, safety being a prime quality attribute without which food is unfit for consumption. Food safety regulations are framed to exercise control over all types of food produced, processed and sold so that the customer is assured that the food consumed will not cause any harm. From the Indian perspective, global harmonisation of food regulations is needed to improve food and nutrition security, the food trade and delivery of safe ready-to-eat (RTE) foods at all places and at all times. The Millennium Development Goals (MDGs) put forward to transform developing societies incorporate many food safety issues. The success of the MDGs, including that of poverty reduction, will in part depend on an effective reduction of food-borne diseases, particularly among the vulnerable group, which includes women and children. Food- and water-borne illnesses can be a serious health hazard, being responsible for high incidences of morbidity and mortality across all age groups of people. Global harmonisation of food regulations would assist in facilitating food trade within and outside India through better compliance, ensuring the safety of RTE catered foods, as well as addressing issues related to the environment. At the same time, regulations need to be optimum, as overregulation may have undue negative effects on the food trade. © 2013 Society of Chemical Industry.

  14. Imitating model of the electronic regulator frequencies of rotation of the automobile diesel engine

    OpenAIRE

    Тырловой, С. И.

    2011-01-01

    The imitating model of an frequency electronic regulator of rotation of high-speed diesel engine an automobile diesel engine with the distributive fuel pump of Bosch company is resulted. Is executed simulation transitive modes of a diesel engine with mechanic and electronic regulators. Deterioration influence plungers steams on dinamic and economic indicators of a diesel engine is analysed. Operational indicators of a diesel engine with mechanic and electronic regulators are compared. The obt...

  15. State of bus safety in the U.S. : summary of federal and state regulations.

    Science.gov (United States)

    2014-06-01

    This report provides a comprehensive overview of transit bus safety regulations and standards developed by all 50 states, as well as : information on how state departments of transportation (DOT) regulate the maintenance or operation of transit/parat...

  16. Risk assessment and safety regulations in offshore oil and gas ...

    African Journals Online (AJOL)

    Risk management of which risk assessment is part, and safety regulations are common in the offshore oil and gas industry management system. The process of conducting risk assessment is mostly a challenge for operational personnel assigned to perform this function. The most significant problem is the decision to use ...

  17. Nuclear safety philosophy and its general application to fuel management and handling - a regulator's viewpoint

    International Nuclear Information System (INIS)

    Petty, I.C.

    1995-01-01

    The Nuclear Safety Division (NSD) of the Health and Safety Executive (HSE) informs the UK Nuclear Industry of the principles that it applies in assessing whether licensees have demonstrated that their nuclear plants are as safe as is reasonably practicable. The paper commences with a discussion of the non-prescriptive approach to health and safety regulation which is the basis of the regulatory activities of NSD's operating arm -the Nuclear Installations Inspectorate (NII). It then describes in broad terms the overall approach used by NII for analysing the safety of nuclear plant, including fuel, which will cover both deterministic and probabilistic methodologies. The paper then introduces the sections of the Safety Assessment Principles which apply to nuclear fuel safety (both fuel handling and management). Most of these principles are of a general nature and do not just apply to fuel. The paper explains how safety cases might relate to the SAPs and offers some views on how a licensee might interpret them in developing his safety case. Particular emphasis is placed on the importance of submitting a high quality safety case and the type of information that should be in it. The advantages of the approach proposed, to the licensee as well as to the regulator, are identified. (author)

  18. Regulations of 19 August 1978 on the optional principles of the Nuclear Safety Committee

    International Nuclear Information System (INIS)

    1978-01-01

    These regulations were published in the Turkish Official Gazette of 19 August 1978 and were made pursuant to Decree no. 7/9141 of 1975 on licensing of nuclear installations which established the Nuclear Safety Committee. They determine the duties and responsibilities of the Committee, its qualifications, its operating principles and its relations with the Nuclear Safety Assistance Service set up in the Turkish Atomic Energy Commission for the purposes of assisting its Secretary General. The regulations also lay down the procedures to be applied for consultations on granting licences. (NEA) [fr

  19. The Regulation of electronic money institutions in the SADC region ...

    African Journals Online (AJOL)

    It looks in particular at how the institutions that issue new electronic money products are regulated ... This development has become global and involves both developed and developing countries, including regions such as the SADC. ... regulatory challenges that came about with the development of electronic money and to ...

  20. Converting the GSR part3 into a national regulations for the protection and safety of radiation sources

    International Nuclear Information System (INIS)

    Hatim, Abdulrahman

    2016-04-01

    The achievement and maintenance of a high level of Radiation Protection and Safety of Radiation Sources depends on a sound legal and governmental infrastructure, including a regulatory body with well-defined responsibilities and functions. The project aimed at converting the IAEA GRS Part 3 into National regulations in Sudan for the protection against the harmful effects of ionizing radiation and safety of radiation sources. The regulations developed covered general requirements for radiation protection, verification of safety, planned exposure situations, emergency exposure situations and existing exposure situation. The Government of Sudan is expected to empower the Sudanese Nuclear Radiological Regulatory Authority (SNRAA) and other relevant authorities to undertake the conversion of IAEA GSR Part 3 into national regulations to be used to regulate all facilities and activities in Sudan. (au)

  1. Application of a support vector machine algorithm to the safety precaution technique of medium-low pressure gas regulators

    Science.gov (United States)

    Hao, Xuejun; An, Xaioran; Wu, Bo; He, Shaoping

    2018-02-01

    In the gas pipeline system, safe operation of a gas regulator determines the stability of the fuel gas supply, and the medium-low pressure gas regulator of the safety precaution system is not perfect at the present stage in the Beijing Gas Group; therefore, safety precaution technique optimization has important social and economic significance. In this paper, according to the running status of the medium-low pressure gas regulator in the SCADA system, a new method for gas regulator safety precaution based on the support vector machine (SVM) is presented. This method takes the gas regulator outlet pressure data as input variables of the SVM model, the fault categories and degree as output variables, which will effectively enhance the precaution accuracy as well as save significant manpower and material resources.

  2. Critical Reflections on Conservatism in Nuclear Safety Regulation

    International Nuclear Information System (INIS)

    Choi, Young Sung; Choi, Kwang Sik

    2007-01-01

    A recent report published by the Committee on Nuclear Regulatory Activities (CNRA) of the OECD Nuclear Energy Agency (NEA) says that a fundamental principle for safety regulators is the practice of conservative decision making. Nuclear regulators frequently face challenging issues surrounded by uncertainties or lack of data and information. No matter what efforts will be made to collect the available information and to assess the issues, nobody can clear all the uncertainties and make absolutely certain decision. More often than not, the regulators have to make a decision in light of continuing uncertainties and limited information. It is at this point that the principle of conservatism should play a role. However the principle comes in many diverse forms such as default conservatism, precautionary principle, defense in depth and realistic conservatism. These different forms of conservatism have different roles and meanings that will take a decision maker to drastically different results. This paper reviews different forms of conservatism in critical way, presents analytical framework for decision making under uncertainty and suggests future research works needed

  3. Safety experts complete second IAEA regulatory review of UK nuclear regulator

    International Nuclear Information System (INIS)

    2009-01-01

    Full text: Nuclear safety experts today concluded a 10-day mission to peer-review the UK Nuclear Regulator: Health and Safety Executive (HSE), Nuclear Directorate (ND). At the request of the UK Government, the International Atomic Energy Agency assembled a team of ten high-level regulatory experts from eight nations to conduct the Integrated Regulatory Review Service (IRRS) mission. The mission was the second of three planned IRRS missions for the United Kingdom. The first was held in March 2006 to begin a process to assess the nation's readiness to regulate and license new reactor designs, considered as a result of the Energy Policy review initiated by the British Prime Minister and the Secretary of State for Trade and Industry (DTI) in 2005. The IRRS team leader Mr. William Borchardt, Executive Director of Operations from the US Nuclear Regulatory Commission, stated, ''The IAEA IRRS serves an important role in both benchmarking against its safety standards and in promoting dialogue between nuclear safety regulators from around the world.'' During the 2nd mission the IRRS the team reviewed HSE/ND progress since the first IRRS mission and recent regulatory developments, the regulation of operating power plants and fuel cycle facilities, the inspection and enforcement programme for nuclear power plants and fuel cycle facilities, and the emergency preparedness and response programme. The IAEA found that HSE/ND has made significant progress toward improving its effectiveness in regulating existing nuclear power plants and in preparing to license new nuclear reactors designs. Many of the findings identified in the 2006 report had been fully addressed and therefore could be considered closed, the others are being addressed in accordance with a comprehensive action plan. IRRS team members visited the Heysham 1 Nuclear Power Plant near Lancaster, the Sellafield site at Cumbria and the Strategic Control Centre at Hutton, and they met senior managers from HSE and a UK

  4. Development of a safety and regulation systems simulation program II

    International Nuclear Information System (INIS)

    1985-05-01

    This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

  5. 77 FR 30923 - Electronic Fund Transfers (Regulation E)

    Science.gov (United States)

    2012-05-24

    ... similar to a debit card that is linked to a traditional checking account. The Bureau is particularly interested in learning more about this product, including its costs, benefits, and risks to consumers. The... methods: Electronic: http://www.regulations.gov . Follow the instructions for submitting comments. Mail...

  6. Safety and regulation in the use of radiation in medicine: status in India and future perspective

    International Nuclear Information System (INIS)

    Gopalakrishnan, A.; Parthasarathy, K.S.; Ghosh, P.K.

    1996-01-01

    This paper briefly reviews the history of radiation protection, regulatory aspects and the status of radiation safety in radiotherapy, radiodiagnosis and nuclear medicine in India. The revised basic safety standards and the future developments envisaged in the safety and regulation are also mentioned. (author). 24 refs., 8 tabs

  7. Recent development in safety regulation of nuclear fuel cycle activities

    International Nuclear Information System (INIS)

    Kato, S.

    2001-01-01

    Through the effort of deliberation and legislation over five years, Japanese government structure was reformed this January, with the aim of realizing simple, efficient and transparent administration. Under the reform, the Agency for Nuclear and Industrial Safety (ANIS) was founded in the Ministry of Economy, Trade and Industry (METI) to be responsible for safety regulation of energy-related nuclear activities, including nuclear fuel cycle activities, and industrial activities, including explosives, high-pressure gasses and mining. As one of the lessons learned from the JCO criticality accident of September 1999, it was pointed out that the government's inspection function was not enough for fuel fabrication facilities. Accordingly, new statutory regulatory activities were introduced, namely, inspection of observance of safety rules and procedures for all kinds of nuclear operators and periodic inspection of fuel fabrication facilities. In addition, in order to cope with insufficient safety education and training of workers in nuclear facilities, licensees of nuclear facilities are required by law to specify safety education and training for their workers. ANIS is committed to enforce these new regulatory activities effectively and efficiently. In addition, it is going to be prepared, in its capacity as safety regulatory authority, for future development of Japanese fuel cycle activities, including commissioning of JNFL Rokkasho reprocessing plant and possible application for licenses for JNFL MOX fabrication plant and for spent fuel interim storage facilities. (author)

  8. The role of the nuclear safety regulator

    International Nuclear Information System (INIS)

    Mellado, I.

    2007-01-01

    The Consejo de Seguridad Nuclear (CSN), or Nuclear Safety Council, is the only Spanish institution qualified in nuclear safety and radiological protection. Created in 1980, the CSN is independent of the Central State Administration, and possesses its own legal standing, estate and resources acquired directly from tax revenues. The CSN proposes regulations and advises the government on subjects within its competence, including the criteria for siting nuclear facilities once the autonomous regions have been informed. The CSN is responsible for issuing mandatory and binding reports to the Ministry of Industry. Tourism and Commerce, and for inspections and evaluation of the facilities included within its realm of competence throughout their phases (construction, start-up, operating and decommissioning). It is also responsible for the radiological control and surveillance of workers, the general public and the environment, as described below. In 1999, a new responsibility was assigned to the CSN to perform studies, assessment and inspections in relation to all phases of radioactive waste and spent fuel management. The CSN reports to the Spanish Parliament and is not subject to the hierarchy or auspices of the Government or the organisations in charge of promoting nuclear energy. The Council itself is an Associative Body comprised of 5 members, appointed by Parliament for a 6 year term (these members cannot be removed). Under this Council is situated an extensive technical body. A General Secretary is seconded by Technical Directors in the area of Nuclear Safety and Radiological Protection. As well there are a R and D Office, an Inspection Office, and a Technical Standards Office. The CSN counts 446 workers, of which 191 are university graduate specialists in nuclear safety or radiological protection. The average age is 45 years. Ongoing training is provided in technical specialties and management. (author)

  9. The electronic security partnership of safety/security and information systems departments.

    Science.gov (United States)

    Yow, J Art

    2012-01-01

    The ever-changing world of security electronics is reviewed in this article. The author focuses on its usage in a hospital setting and the need for safety/security and information systems departments to work together to protect and get full value from IP systems.

  10. The UK health and safety executive's policies on information relating to nuclear safety regulation

    International Nuclear Information System (INIS)

    Williams, L.

    1994-01-01

    How a message is transmitted can be as important as what is said. To be effective a message has to be timely, targeted and clear. People do not always remember what was said, by how and when it was said. This paper discusses some of the tools which the Nuclear Safety Division (NSD), the UK's nuclear regulator, has used and emphasizes the need to recognize the importance of a recipient interest in attempting to transmit a message. (author). 4 refs

  11. NRC safety research in support of regulation. Selected highlights

    International Nuclear Information System (INIS)

    1986-05-01

    The report presents selected highlights of how research has contributed to the regulatory effort. It explains the research role of the NRC and nuclear safety research contributions in the areas of: pressure vessel integrity, piping, small- and large-break loss-of-coolant accidents, hydrogen and containment, source term analysis, seismic hazards and high-level waste management. The report also provides a summary of current and future research directions in support of regulation

  12. 48 CFR 1252.217-80 - Department of Labor Safety and Health Regulations for Ship Repairing.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Department of Labor Safety and Health Regulations for Ship Repairing. 1252.217-80 Section 1252.217-80 Federal Acquisition Regulations System DEPARTMENT OF TRANSPORTATION CLAUSES AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 1252.217-80...

  13. Learning and nuclear safety: New reactors and US regulation

    International Nuclear Information System (INIS)

    Nichols, E.; Wildavsky, A.

    1992-01-01

    Gathering and analyzing data from operating reactors has become part of government and industry programs to improve performance in plants already on line and to inform development of future reactors. In the United States, however, early development and certain other factors combined to encourage a bias in learning. Regulation and learning from operational data intersect in ways that limit participation, data collection, and positive response to findings. Past learning has shown the advantage of simpler more standard designs with passive or inherent safety features. However, even designs incorporating these past lessons are apt to face tough regulatory tests and much criticism as operating experience is gathered. Only the operational success of new standardized reactors is apt to help rationalize regulation. (orig.)

  14. An analysis of electronic health record-related patient safety concerns

    Science.gov (United States)

    Meeks, Derek W; Smith, Michael W; Taylor, Lesley; Sittig, Dean F; Scott, Jean M; Singh, Hardeep

    2014-01-01

    Objective A recent Institute of Medicine report called for attention to safety issues related to electronic health records (EHRs). We analyzed EHR-related safety concerns reported within a large, integrated healthcare system. Methods The Informatics Patient Safety Office of the Veterans Health Administration (VA) maintains a non-punitive, voluntary reporting system to collect and investigate EHR-related safety concerns (ie, adverse events, potential events, and near misses). We analyzed completed investigations using an eight-dimension sociotechnical conceptual model that accounted for both technical and non-technical dimensions of safety. Using the framework analysis approach to qualitative data, we identified emergent and recurring safety concerns common to multiple reports. Results We extracted 100 consecutive, unique, closed investigations between August 2009 and May 2013 from 344 reported incidents. Seventy-four involved unsafe technology and 25 involved unsafe use of technology. A majority (70%) involved two or more model dimensions. Most often, non-technical dimensions such as workflow, policies, and personnel interacted in a complex fashion with technical dimensions such as software/hardware, content, and user interface to produce safety concerns. Most (94%) safety concerns related to either unmet data-display needs in the EHR (ie, displayed information available to the end user failed to reduce uncertainty or led to increased potential for patient harm), software upgrades or modifications, data transmission between components of the EHR, or ‘hidden dependencies’ within the EHR. Discussion EHR-related safety concerns involving both unsafe technology and unsafe use of technology persist long after ‘go-live’ and despite the sophisticated EHR infrastructure represented in our data source. Currently, few healthcare institutions have reporting and analysis capabilities similar to the VA. Conclusions Because EHR-related safety concerns have complex

  15. Food safety regulations: what we learned from the Fukushima nuclear accident

    International Nuclear Information System (INIS)

    Hamada, Nobuyuki; Ogino, Haruyuki

    2012-01-01

    On 11 March 2011, the magnitude-9.0 earthquake and a substantial tsunami struck off the northeast coast of Japan. The Fukushima nuclear power plants were inundated and stricken, followed by radionuclide releases outside the crippled reactors. Provisional regulation values for radioactivity in food and drink were set on 17 March and were adopted from the preset index values, except that for radioiodines in water and milk ingested by infants. For radiocesiums, uranium, plutonium and transuranic α emitters, index values were defined in all food and drink not to exceed a committed effective dose of 5 mSv/year. Index values for radioiodines were defined not to exceed a committed equivalent dose to the thyroid of 50 mSv/year, and set in water, milk and some vegetables, but not in other foodstuffs. Index values were calculated as radioactive concentrations of indicator radionuclides ( 131 I for radioiodines, 134 Cs and 137 Cs for radiocesiums) by postulating the relative radioactive concentration of coexisting radionuclides (e.g., 132 I, 133 I, 134 I, 135 I and 132 Te for 131 I). Surveys were thence conducted to monitor levels of 131 I, 134 Cs and 137 Cs. Provisional regulation values were exceeded in tap water, raw milk and some vegetables, and restrictions on distribution and consumption began on 21 March. Fish contaminated with radioiodines at levels of concern were then detected, so that the provisional regulation value for radioiodines in seafood adopted from that in vegetables were additionally set on 5 April. Overall, restrictions started within 25 days after the first excess in each food or drink item, and maximum levels were detected in leafy vegetables (54,100 Bq/kg for 131 I, and a total of 82,000 Bq/kg for 134 Cs and 137 Cs). This paper focuses on the logic behind such food safety regulations, and discusses its underlying issues. The outlines of the food monitoring results for 24,685 samples and the enforced restrictions will also be described. - Highlights

  16. Project CHERISH (Children in Home Environments: Regulation To Improve Safety and Health). Final Report.

    Science.gov (United States)

    Grubb, Paul Dallas

    In 1990, Project CHERISH (Children in Home Environments: Regulation to Increase Safety and Health) enabled the Texas Department of Human Services to implement and evaluate several innovative strategies to strengthen regulation of family day care homes. This report contains descriptions of those strategies, an evaluation of their efficacy, and…

  17. Regulation of electron temperature gradient turbulence by zonal flows driven by trapped electron modes

    Science.gov (United States)

    Asahi, Y.; Ishizawa, A.; Watanabe, T.-H.; Tsutsui, H.; Tsuji-Iio, S.

    2014-05-01

    Turbulent transport caused by electron temperature gradient (ETG) modes was investigated by means of gyrokinetic simulations. It was found that the ETG turbulence can be regulated by meso-scale zonal flows driven by trapped electron modes (TEMs), which are excited with much smaller growth rates than those of ETG modes. The zonal flows of which radial wavelengths are in between the ion and the electron banana widths are not shielded by trapped ions nor electrons, and hence they are effectively driven by the TEMs. It was also shown that an E × B shearing rate of the TEM-driven zonal flows is larger than or comparable to the growth rates of long-wavelength ETG modes and TEMs, which make a main contribution to the turbulent transport before excitation of the zonal flows.

  18. 76 FR 7107 - Quarterly Listings; Safety Zones, Security Zones, Special Local Regulations, Drawbridge Operation...

    Science.gov (United States)

    2011-02-09

    ... defined boundary for which regulations for vessels navigating within the area have been established by the...)...... 9/19/2008 USCG-2008-0814 San Diego, CA Safety Zones (Part 165)...... 9/6/2008 USCG-2008-0827 Ocean... (Part 165). USCG-2009-0402 Ocean City, NJ Safety Zones (Part 165)...... 10/10/2009 USCG-2009-0403...

  19. Electronic Safety Resource Tools -- Supporting Hydrogen and Fuel Cell Commercialization

    Energy Technology Data Exchange (ETDEWEB)

    Barilo, Nick F.

    2014-09-29

    The Pacific Northwest National Laboratory (PNNL) Hydrogen Safety Program conducted a planning session in Los Angeles, CA on April 1, 2014 to consider what electronic safety tools would benefit the next phase of hydrogen and fuel cell commercialization. A diverse, 20-person team led by an experienced facilitator considered the question as it applied to the eight most relevant user groups. The results and subsequent evaluation activities revealed several possible resource tools that could greatly benefit users. The tool identified as having the greatest potential for impact is a hydrogen safety portal, which can be the central location for integrating and disseminating safety information (including most of the tools identified in this report). Such a tool can provide credible and reliable information from a trustworthy source. Other impactful tools identified include a codes and standards wizard to guide users through a series of questions relating to application and specific features of the requirements; a scenario-based virtual reality training for first responders; peer networking tools to bring users from focused groups together to discuss and collaborate on hydrogen safety issues; and a focused tool for training inspectors. Table ES.1 provides results of the planning session, including proposed new tools and changes to existing tools.

  20. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-10-15

    The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

  1. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements

    International Nuclear Information System (INIS)

    2012-01-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt... standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

  2. Moving beyond command-and-control: reflexivity in the regulation of occupational safety and health and the environment.

    NARCIS (Netherlands)

    Aalders, M.V.C.; Wilthagen, T.

    1997-01-01

    Direct or "command-and-control" regulation has had limited success in dealing with occupational health and safety and with environmental regulation. This lack of success has led policymakers to experiment with self-regulation as an alternative means of achieving the goals of social regulation. The

  3. Schedules of Provisions of the IAEA Regulations for the Safe Transport of Radioactive Material (2009 Ed.). Safety Guide

    International Nuclear Information System (INIS)

    2014-01-01

    This Safety Guide is issued in support of Regulations for the Safe Transport of Radioactive Material (IAEA Safety Standards Series No. TS-R-1, 2009 Edition). It lists the paragraph numbers of the Transport Regulations that are relevant for specified types of consignment, classified according to their UN numbers. It does not provide additional recommendations. The intended users are consignors and consignees, carriers, shippers, regulators, and end users involved in the transport of radioactive material. A person or organization intending to transport a particular type of consignment of radioactive material must meet requirements in all sections of the Transport Regulations. This Safety Guide aids users by providing a listing of the relevant requirements of the Transport Regulations for each type of radioactive material, package or shipment. Once a consignor has classified the radioactive material to be shipped, the appropriate UN number can be assigned and the paragraph numbers of the requirements that apply for the shipment can be found in the corresponding schedule

  4. Conception of electron beam-driven subcritical molten salt ultimate safety reactor

    Energy Technology Data Exchange (ETDEWEB)

    Abalin, S.S.; Alekseev, P.N.; Ignat`ev, V.V. [Kurchatov Institute, Moscow (Russian Federation)] [and others

    1995-10-01

    This paper is a preliminary sketch of a conception to develop the {open_quotes}ultimate safety reactor{close_quotes} using modern reactor and accelerator technologies. This approach would not require a long-range R&D program. The ultimate safety reactor could produce heat and electric energy, expand the production of fuel, or be used for the transmutation of long-lived wastes. The use of the combined double molten salt reactor system allows adequate neutron multiplication to permit using an electron accelerator for the initial neutron flux. The general parameters of such a system are discussed in this paper.

  5. Trends in pharmacy staff's perception of patient safety in Swedish community pharmacies after re-regulation of conditions.

    Science.gov (United States)

    Kälvemark Sporrong, Sofia; Nordén-Hägg, Annika

    2014-10-01

    All changes in the regulation of pharmacies have an impact on the work carried out in pharmacies and also on patient safety, regardless of whether this is the intention or not. To compare staff apprehension regarding some aspects of patient safety and quality in community pharmacies prior to and after the 2009 changes in regulation of the Swedish community pharmacy market. Questionnaires targeted at pharmacy staff before and after the changes in regulation (in 2008, 2011/12, and 2012/13 respectively) used four identical items, making comparisons of some aspects possible. All four items demonstrated a significant decrease in the first survey after the changes as compared to before. In the second survey significant differences were found on the two items representing safety climate whereas the items representing team climate and management showed no significant differences. The comparison carried out in this study indicates a negative effect in Swedish community pharmacies on safety and quality issues, as experienced by pharmacy staff. It is recommended that the possible effects of healthcare reforms are assessed before implementation, in order to counteract conceivable decline in factors including patient safety and working conditions.

  6. Stakeholder confidence in effective safety regulation. A regulator's view on the role of independent research capability

    International Nuclear Information System (INIS)

    Kotra, Janet; Mohanty, Sitakanto

    2006-01-01

    The authors provided a regulator's view on the role of independent research capability and its relationship to stakeholder confidence. They underscored the NRC's commitment to regulatory openness in its Strategic Plan. A number of actions have been adopted to achieve openness: public access to information about risks, safety and licensee performance that is accurate and timely; enhanced awareness of NRC as an independent regulator; fair and timely process for public involvement in NRC's decision-making; and early public involvement and two-way communication to enhance public confidence in NRC's regulatory process. The presentation reviewed the ways through which the NRC seeks to inspire confidence in its process as independent regulator and in future decisions concerning whether to authorize the U.S. DOE to construct the proposed repository at Yucca Mountain. Key to this will be reviewing all information objectively, making open decisions based on sound, scientific judgements about the facts; and maintaining an open and fair public process, and accessing independent R and D. It was noted that among the requirements for the safety review for the Yucca Mountain repository will be extensive technical and scientific analyses, evaluation of expert judgement, and long-range modelling assessments of expected repository performance. NRC requires independent scientific and engineering analyses to develop technical bases for regulations and guidance; evaluate adequacy of DOE's safety case for a potential repository; assist preparation of NRC Safety Evaluation Report; provide technical support for NRC testimony during licensing hearing; and develop effective outreach and communication tools. Confidence in NRC's use of science and engineering will depend upon: competence; independence; open and fair process; regulatory outcomes that are subject to verification and monitoring. To assist, the NRC established the Centre for Nuclear Waste Regulatory

  7. The dynamic flowgraph methodology as a safety analysis tool : programmable electronic system design and verification

    NARCIS (Netherlands)

    Houtermans, M.J.M.; Apostolakis, G.E.; Brombacher, A.C.; Karydas, D.M.

    2002-01-01

    The objective of this paper is to demonstrate the use of the Dynamic Flowgraph Methodology (DFM) during the design and verification of programmable electronic safety-related systems. The safety system consists of hardware as well as software. This paper explains and demonstrates the use of DFM, and

  8. Development of safety evaluation methods and analysis codes applied to the safety regulations for the design and construction stage of fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The purposes of this study are to develop the safety evaluation methods and analysis codes needed in the design and construction stage of fast breeder reactor (FBR). In JFY 2012, the following results are obtained. As for the development of safety evaluation methods needed in the safety examination conducted for the reactor establishment permission, development of the analysis codes, such as core damage analysis code, were carried out following the planned schedule. As for the development of the safety evaluation method needed for the risk informed safety regulation, the quantification technique of the event tree using the Continuous Markov chain Monte Carlo method (CMMC method) were studied. (author)

  9. Improved nuclear power plant operations through performance-based safety regulation

    International Nuclear Information System (INIS)

    Golay, M.W.

    1998-01-01

    The US Nuclear Regulatory Commission (NRC) has recently instituted use of Risk-Informed, Performance-Based Regulation (RIPBR) for protecting public safety in the use of nuclear power. This was done most importantly during June 1997 in issuance of revised Regulatory Guides and Standard Review Plan (SRP) guidance to licensees and the NRC staff. The propose of RIPBR is to replace the previously-used system of prescriptive regulation, which focuses upon what licensees must do, to a system which focuses upon what they must achieve. RIPBR is goals-oriented and the previous system is means-oriented. This regulatory change is potentially revolutionary, and offers many opportunities for improving the efficiency of improving both nuclear power operations and safety. However, it must be nurtured carefully if is to be successful. The work reported in this paper is concerned with showing how RIPBR can be implemented successfully, with benefits in both areas being attained. It is also concerned with how several of the practical barriers to establishing a workable new regulatory system can be overcome. This work, sponsored by the US Dept. of Energy, is being performed in collaboration with Northeast Utilities Services Crop. and the Idaho National Engineering Laboratory. In our work we have examined a practical safety-related example at the Millstone 3 nuclear power station for implementation of RIPBR. In this examination we have formulated a set of modifications to the plant's technical specifications, and are in the process of investigating their bases and refining the modifications. (author)

  10. Electronic Commerce: a battle on regulation, standards transportation media and business integration

    Directory of Open Access Journals (Sweden)

    Kim Andersen

    1998-11-01

    Full Text Available The drive towards the electronic commerce organisation is both a troublesome and a strifted path for government, enterprises and consumers worldwide. In this article we analyse the evolution of electronic commerce in Denmark during the period 1995-1998 from four perspectives: regulation, standards, transportation media and business integration. The Danish government is stimulating the use of electronic commerce using direct and indirect policy initiatives on central, governmental regulation and establishment of greens enabling self-regulation. Also, the governments own, organisational management is in Denmark seen as a mean to exalt electronic commerce. Onwards, the fist on proprietary standards and the UN/EDIFACT is an ongoing source of delaying, stimulating or reventing electronic commerce depending on the business sector and the size of market actor addressed. In Denmark, the direct access and value added network supporters have so far been the dominating mean to transport the electronic documents in the business transaction. The Internet and XML technology is at the turn of the century challenging the way of doing business within this field. Some view this as the big blue to speed the diffusion of electronic commerce; others are worried that the incentive to investment and pull the partners in the value chain to use EDI might be lost. Finally, our study conclude that the debate on business integration issues is ambiguous and characterised by substantial uncertainty on for example the role of intermediates, direct sale, hyper-shift in business partners and the pull/push of global enterprises at the local markets.

  11. Safety Margins and Their Economical Value in a De-regulated Market

    International Nuclear Information System (INIS)

    Vidard, Michel

    2002-01-01

    The definition of safety margins is sometimes ambiguous. Depending on assumptions used to evaluate the evolution of plant parameters and on acceptance criteria, the same design could well turn out to have positive, zero, or negative margin for the same operating situation. Very often, considering that an optimized reactor would have to operate with zero margin compared to at least one safety criterion, designers or utilities considered in their analyses penalizing assumptions. This was done for example either considering reduced component capability or very high core peaking factors, the latter generally exceeding by far what would be anticipated in perturbed situations. This approach has three major drawbacks: -having a reasonable understanding of the real importance of safety margins is difficult, -if a non-conservatism is identified in a methodology, there is a high risk of being in a no-compliance situation from a regulatory standpoint, -it leads to a limitation on allowable electrical output and constraints on technical specifications for example. In a regulated market, such a situation can be tolerable as the final customer has to pay the extra financial burden in any case. In a de-regulated market, the situation is significantly different. The final customer can choose his supplier, and is likely to go to those offering the best prices, i.e. those making optimal use of their available resources. There is so a need for better understanding of real plant capabilities. Revisiting assumptions used for evaluating safety margins is so highly recommended, if not imperative, to electricity companies. This will helpful to reshape company strategies in case of evolution of market conditions. (author)

  12. A double-regulated oncolytic adenovirus with improved safety for adenocarcinoma therapy

    International Nuclear Information System (INIS)

    Wei, Na; Fan, Jun Kai; Gu, Jin Fa; He, Ling Feng; Tang, Wen Hao; Cao, Xin; Liu, Xin Yuan

    2009-01-01

    Safety and efficiency are equally important to be considered in developing oncolytic adenovirus. Previously, we have reported that ZD55, an oncolytic adenovirus with the deletion of E1B-55K gene, exhibited potent antitumor activity. In this study, to improve the safety of ZD55, we utilized MUC1 promoter to replace the native promoter of E1A on the basis of ZD55, and generated a double-regulated adenovirus, named MUD55. Our data demonstrated that the expression of early and late genes of MUD55 was both reduced in MUC1-negative cells, resulting in its stricter glandular-tumor selective progeny production. The cytopathic effect of MUD55 was about 10-fold lower than mono-regulated adenovirus ZD55 or Ad.MUC1 in normal cells and not obviously attenuated in glandular tumor cells. Moreover, MUD55 showed the least liver toxicity when administrated by intravenous injection in nude mice. These results indicate that MUD55 could be a promising candidate for the treatment of adenocarcinoma.

  13. The costs of uncertainty: regulating health and safety in the Canadian uranium industry

    International Nuclear Information System (INIS)

    Robinson, I.

    1982-04-01

    Federalism, and particularly federal/provincial jurisdictional relationships, have led to considerable uncertainty in the regulation of occupational health and safety and of environmental protection in the Canadian uranium mining industry. The two principal uranium producing provinces in Canada are Saskatchewan and Ontario. Since 1978, in an attempt to avoid constitutional issues, both these provinces and the federal government as well have proceeded unilaterally with health and safety reforms for the industry. In Saskatchewan this has resulted in areas of overlapping jurisdiction, which have led to uncertainty over the legal enforceability of the provincial regulations. In Ontario, the province has left significant gaps in the protection of both workers and the environment. Little progress can be expected in eliminating these gaps and overlaps until the current administrative and jurisdictional arrangements are understood

  14. Ethical issues in engineering design processes ; regulative frameworks for safety and sustainability

    NARCIS (Netherlands)

    Gorp, A. van

    2007-01-01

    The ways designers deal with ethical issues that arise in their consideration of safety and sustainability in engineering design processes are described. In the case studies, upon which this article is based, a difference can be seen between normal and radical design. Designers refer to regulative

  15. 75 FR 65439 - Defense Federal Acquisition Regulation Supplement; Electronic Subcontracting Reporting System

    Science.gov (United States)

    2010-10-25

    ... Accounting Service or Missile Defense Agency. (2) For DoD, the authority to acknowledge receipt or reject... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Parts 219 and 252 [DFARS Case 2009-D002] Defense Federal Acquisition Regulation Supplement; Electronic Subcontracting Reporting...

  16. 76 FR 25566 - Defense Federal Acquisition Regulation Supplement (DFARS); Electronic Ordering Procedures (DFARS...

    Science.gov (United States)

    2011-05-05

    ... officials to specify e-mail as an ``electronic commerce method'' so long as it is authorized in the schedule... recognized electronic commerce method. The respondent recommended, in the alternative, that the Government... stated that electronic commerce is a term specifically identified in Federal Acquisition Regulation (FAR...

  17. Reference values on safety regulation of land disposal of low level radioactive solid waste (the second interim report) and its incorporation into legal regulations

    International Nuclear Information System (INIS)

    Aoki, Terumi

    1994-01-01

    Safety regulation of land disposal of low level radioactive solid waste in Japan is based on 'the basic philosophy on the safety regulation of land disposal of low level radioactive solid waste' determined by the Nuclear safety Committee (October 1985). The basic philosophy on the upper limit of radioactivity of disposed wastes was published as the reference values in the interim report (February 1987) and in the second interim report (June 1992). In the second interim report, the upper limits of radioactivity are established for three types of solid radioactive wastes: 1) metals, incombustible or flame resistant wastes generated nuclear reactor facilities and solidified in vessels, 2) large metallic structures generated from decommissioning of reactor facilities and difficult to solidify in vessels, and 3) radioactive concrete waste generated from decommissioning of reactor facilities. The upper limits of radioactivity are presented for C-14, Co-60, Ni-63, Sr-90, Cs-137, alfa-emmitters, Ca-41 (for concrete) and Eu-152 (for concrete). Related laws and regulations in Japan on safe disposal of low level wastes are explained. (T.H.)

  18. Food Safety Regulation and Firm Productivity: Evidence from the French Food Industry

    OpenAIRE

    Requillart, Vincent; Nauges, Celine; Simioni, Michel; Bontemps, Christophe

    2012-01-01

    The purpose of this article is to assess whether food safety regulations imposed by the European Union in the 2000s may have induced a slow-down in the productivity of firms in the food processing sector. The impact of regulations on costs and productivity has seldom been studied. This article contributes to the literature by measuring productivity change using a panel of French food processing firms for the years 1996 to 2006. To do so, we develop an original iterative testing procedure b...

  19. 78 FR 6782 - Safety Zone-Chelsea River, Boston Inner Harbor, Boston, MA

    Science.gov (United States)

    2013-01-31

    ... Management Facility. 3. Privacy Act Anyone can search the electronic form of comments received into any of... factors led to the establishment of the present safety zone regulation which restricts certain vessel...

  20. 33 CFR 165.T09-1080 - Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL. 165.T09-1080 Section 165.T09-1080 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED...

  1. Food safety regulations in Australia and New Zealand Food Standards.

    Science.gov (United States)

    Ghosh, Dilip

    2014-08-01

    Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

  2. A primer of drug safety surveillance: an industry perspective. Part I: Information flow, new drug development, and federal regulations.

    Science.gov (United States)

    Allan, M C

    1992-01-01

    To place the fundamentals of clinical drug safety surveillance in a conceptual framework that will facilitate understanding and application of adverse drug event data to protect the health of the public and support a market for pharmaceutical manufacturers' products. Part I of this series provides a background for the discussion of drug safety by defining the basic terms and showing the flow of safety information through a pharmaceutical company. The customers for adverse drug event data are identified to provide a basis for providing quality service. The development of a drug product is briefly reviewed to show the evolution of safety data. Drug development and safety are defined by federal regulations. These regulations are developed by the FDA with information from pharmaceutical manufacturers. The intent of the regulations and the accompanying guidelines is described. An illustration from the news media is cited to show an alternative, positive approach to handling an adverse event report. This review uses primary sources from the federal laws (regulations), commentaries, and summaries. Very complex topics are briefly summarized in the text and additional readings are presented in an appendix. Secondary sources, ranging from newspaper articles to judicial summaries, illustrate the interpretation of adverse drug events and opportunities for drug safety surveillance intervention. The reference materials used were articles theoretically or practically applicable in the day-to-day practice of drug safety surveillance. The role of clinical drug safety surveillance in product monitoring and drug development is described. The process of drug safety surveillance is defined by the Food and Drug Administration regulations, product labeling, product knowledge, and database management. Database management is subdivided into the functions of receipt, retention, retrieval, and review of adverse event reports. Emphasis is placed on the dynamic interaction ;of the components

  3. NRC safety research in support of regulation, 1986

    International Nuclear Information System (INIS)

    1987-09-01

    This report is the second in a series of annual reports responding to congressional inquiries as to the utilization of nuclear regulatory research. NUREG-1175, ''NRC Safety Research in Support of Regulation,'' published in May 1986, reported major research accomplishments between about FY 1980 and FY 1985. This report narrates the accomplishments of FY 1986 and does not restate earlier accomplishments. Earlier research results are mentioned in the context of current results in the interest of continuity. Both the direct contributions to scientific and technical knowledge and their regulatory applications, when there has been a definite regulatory outcome during FY 1986, have been described

  4. Upholding science in health, safety and environmental risk assessments and regulations

    International Nuclear Information System (INIS)

    Aschner, Michael; Autrup, Herman N.; Berry, Sir Colin L.; Boobis, Alan R.; Cohen, Samuel M.; Creppy, Edmond E.; Dekant, Wolfgang; Doull, John; Galli, Corrado L.; Goodman, Jay I.; Gori, Gio B.; Greim, Helmut A.; Joudrier, Philippe

    2016-01-01

    A public appeal has been advanced by a large group of scientists, concerned that science has been misused in attempting to quantify and regulate unmeasurable hazards and risks. The appeal recalls that science is unable to evaluate hazards that cannot be measured, and that science in such cases should not be invoked to justify risk assessments in health, safety and environmental regulations. The appeal also notes that most national and international statutes delineating the discretion of regulators are ambiguous about what rules of evidence ought to apply. Those statutes should be revised to ensure that the evidence for regulatory action is grounded on the standards of the scientific method, whenever feasible. When independent scientific evidence is not possible, policies and regulations should be informed by publicly debated trade-offs between socially desirable uses and social perceptions of affordable precaution. This article explores the premises, implications and actions supporting the appeal and its objectives.

  5. Food safety regulatory systems in Europe and China:A study of how co-regulation can improve regulatory effectiveness

    Institute of Scientific and Technical Information of China (English)

    Kevin Chen; WANG Xin-xin; SONG Hai-ying

    2015-01-01

    Food safety has received a great deal of attention in both developed and developing countries in recent years. In China, the numerous food scandals and scares that have struck over the past decade have spurred signiifcant food safety regulatory reform, which has been increasingly oriented towards the public-private partnership model adopted by the Europe Union’s (EU) food safety regulatory system. This paper analyzes the development of both the EU’s and China’s food safety regu-latory systems, identiifes the current chalenges for China and additionaly considers the role of public-private partnership. The success of co-regulation in the food regulatory system would bring signiifcant beneifts and opportunities for China. Finaly, this paper recommends additional measures like training and grants to improve the private’s sector effectiveness in co-regulating China’s food safety issues.

  6. Health and safety regulation of uranium mining and milling

    International Nuclear Information System (INIS)

    Dory, A.B.

    1980-07-01

    The Canadian Atomic Energy Control Board licenses all nuclear facilities in Canada, including uranium mines and mills. The protection of health, safety and the environment is one of the requirements of each licence. A limit of 4 Working Level Months exposure to radon and radon daughters annually has been set, and guidelines for weekly or more frequent workplace monitoring have been established. Personal monitoring devices are being tested, and thermoluminescent dosimeters are to be introduced. The Board reviews its licensees' ventilation plans continuously. The staged licensing process involves the granting of the following documents: 1) ore removal; 2) underground exploration permit; 3) site and construction approval; 4) mining facility operating licence; 5) shut-down approval. Compliance with regulations and licence conditions is monitored mainly by inspectors appointed by provincial agencies, with Board staff exercising auditing fuctions. The Board involves the workers directly with their own health and safety by sending their unions copies of all relevant documents and inviting comments

  7. Practice specific model regulations: Radiation safety of non-medical irradiation facilities. Interim report for comment

    International Nuclear Information System (INIS)

    2003-08-01

    The International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (Standards or BSS) were published as IAEA Safety Series No. 115 in 1996. This publication is the culmination of efforts over the past decades towards harmonization of radiation protection and safety standards internationally, and is jointly sponsored by the Food and Agriculture Organisation of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organisation (ILO), the OECD Nuclear Energy Agency (OECD/NEA), the Pan American Health Organisation (PAHO) and the World Health Organisation (WHO). The purpose of the Standards is to establish basic requirements for protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure (hereinafter called 'radiation safety'). The requirements are based on the principles set out in the Safety Fundamentals, published as IAEA Safety Series Nos 110 and 120. The Standards can be implemented only through an effective radiation safety infrastructure that includes adequate laws and regulations, an efficient regulatory system, supporting experts and services, and a 'safety culture' shared by all those with responsibilities for protection, including both management and workers. IAEA-TECDOC-1067, Organization and Implementation of a National Regulatory Infrastructure Governing Protection against Ionizing Radiation and the Safety of Radiation Sources, provides detailed guidance on how to establish or improve national radiation safety infrastructure in order to implement the requirements of the Standards. The TECDOC covers the elements of a radiation safety infrastructure at the national level needed to apply the Standards to radiation sources such as those used in medicine, agriculture, research, industry and education. It also provides advice on approaches to the organization and operation of

  8. Nursing Student Experiences Regarding Safe Use of Electronic Health Records: A Pilot Study of the Safety and Assurance Factors for EHR Resilience Guides.

    Science.gov (United States)

    Whitt, Karen J; Eden, Lacey; Merrill, Katreena Collette; Hughes, Mckenna

    2017-01-01

    Previous research has linked improper electronic health record configuration and use with adverse patient events. In response to this problem, the US Office of the National Coordinator for Health Information Technology developed the Safety and Assurance Factors for EHR Resilience guides to evaluate electronic health records for optimal use and safety features. During the course of their education, nursing students are exposed to a variety of clinical practice settings and electronic health records. This descriptive study evaluated 108 undergraduate and 51 graduate nursing students' ratings of electronic health record features and safe practices, as well as what they learned from utilizing the computerized provider order entry and clinician communication Safety and Assurance Factors for EHR Resilience guide checklists. More than 80% of the undergraduate and 70% of the graduate students reported that they experienced user problems with electronic health records in the past. More than 50% of the students felt that electronic health records contribute to adverse patient outcomes. Students reported that many of the features assessed were not fully implemented in their electronic health record. These findings highlight areas where electronic health records can be improved to optimize patient safety. The majority of students reported that utilizing the Safety and Assurance Factors for EHR Resilience guides increased their understanding of electronic health record features.

  9. 76 FR 27897 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port...

    Science.gov (United States)

    2011-05-13

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-0342] Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port Columbia River... will enforce the security and safety zone in 33 CFR 165.1318 for large passenger vessels operating in...

  10. 75 FR 16370 - Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports in Boston Captain of...

    Science.gov (United States)

    2010-04-01

    ... rule under Executive Order 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and would not create an environmental risk to...] RIN 1625-AA00, RIN 1625-AA11 Regulated Navigation Areas, Safety Zones, Security Zones; Deepwater Ports...

  11. Multimegawatt Space Reactor Safety

    International Nuclear Information System (INIS)

    Stanley, M.L.

    1989-01-01

    The Multimegawatt (MMW) Space Reactor Project supports the Strategic Defense Initiative Office requirement to provide reliable, safe, cost-effective, electrical power in the MMW range. Specifically, power may be used for neutral particle beams, free electron lasers, electromagnetic launchers, and orbital transfer vehicles. This power plant technology may also apply to the electrical power required for other uses such as deep-space probes and planetary exploration. The Multimegawatt Space Reactor Project, the Thermionic Fuel Element Verification Program, and Centaurus Program all support the Multimegawatt Space Nuclear Power Program and form an important part of the US Department of Energy's (DOE's) space and defense power systems activities. A major objective of the MMW project is the development of a reference flight system design that provides the desired levels of public safety, health protection, and special nuclear material (SNM) protection when used during its designated missions. The safety requirements for the MMW project are a hierarchy of requirements that consist of safety requirements/regulations, a safety policy, general safety criteria, safety technical specifications, safety design specifications, and the system design. This paper describes the strategy and philosophy behind the development of the safety requirements imposed upon the MMW concept developers. The safety organization, safety policy, generic safety issues, general safety criteria, and the safety technical specifications are discussed

  12. Protectionism or Legitimate Regulations: What can Trade Partners Expect from the New US Food Safety Regime?

    OpenAIRE

    Nakuja, T.; Kerr, William A.

    2013-01-01

    In January 2011, the US passed the Food Safety Modernization Act (FSMA) which represents a major legislative initiative to revise and strengthen the regulatory regime pertaining to foodborne illness and contamination. The tightening of the regulatory regime was justified on the basis of a number of high-profile foodborne disease incidents, which are claimed to have undermined public confidence in the US food safety system. While tightening food safety regulations inevitably increase barriers ...

  13. Periodic Safety Review in Interim Storage Facilities - Current Regulation and Experiences in Germany

    International Nuclear Information System (INIS)

    Neles, Julia Mareike; Schmidt, Gerhard

    2014-01-01

    Periodic safety reviews in nuclear power plants in Germany have been performed since the end of the 1980's as an indirect follow-up of the accident in Chernobyl and, in the meantime, are formally required by law. During this process the guidelines governing this review were developed in stages and reached their final form in 1996. Interim storage facilities and other nuclear facilities at that time were not included, so the guidelines were solely focused on the specific safety issues of nuclear power plants. Following IAEA's recommendations, the Western European Nuclear Regulator Association (WENRA) introduced PSRs in its safety reference levels for storage facilities (current version in WGWD report 2.1 as of Feb 2011: SRLs 59 - 61). Based on these formulations, Germany improved its regulation in 2010 with a recommendation of the Nuclear Waste Management Commission (Entsorgungskommission, ESK), an expert advisory commission for the federal regulatory body BMU. The ESK formulated these detailed requirements in the 'ESK recommendation for guides to the performance of periodic safety reviews for interim storage facilities for irradiated fuel elements and heat-generating radioactive waste'. Before finalization of the guideline a test phase was introduced, aimed to test the new regulation in practice and to later include the lessons learned in the final formulation of the guideline. The two-year test phase started in October 2011 in which the performance of a PSR will be tested at two selected interim storage facilities. Currently these recommendations are discussed with interested/concerned institutions. The results of the test phase shall be considered for improvements of the draft and during the final preparation of guidelines. Currently the PSR for the first ISF is in an advanced stage, the second facility just started the process. Preliminary conclusions from the test phase show that the implementation of the draft guideline requires interpretation. The aim of a

  14. Safety leadership in the teaching laboratories of electrical and electronic engineering departments at Taiwanese Universities.

    Science.gov (United States)

    Wu, Tsung-Chih

    2008-01-01

    Safety has always been one of the principal goals in teaching laboratories. Laboratories cannot serve their educational purpose when accidents occur. The leadership of department heads has a major impact on laboratory safety, so this study discusses the factors affecting safety leadership in teaching laboratories. This study uses a mail survey to explore the perceived safety leadership in electrical and electronic engineering departments at Taiwanese universities. An exploratory factor analysis shows that there are three main components of safety leadership, as measured on a safety leadership scale: safety controlling, safety coaching, and safety caring. The descriptive statistics also reveals that among faculty, the perception of department heads' safety leadership is in general positive. A two-way MANOVA shows that there are interaction effects on safety leadership between university size and instructor age; there are also interaction effects between presence of a safety committee and faculty gender and faculty age. It is therefore necessary to assess organizational factors when determining whether individual factors are the cause of differing perceptions among faculty members. The author also presents advice on improving safety leadership for department heads at small universities and at universities without safety committees.

  15. Research on fuzzy PID control to electronic speed regulator

    Science.gov (United States)

    Xu, Xiao-gang; Chen, Xue-hui; Zheng, Sheng-guo

    2007-12-01

    As an important part of diesel engine, the speed regulator plays an important role in stabilizing speed and improving engine's performance. Because there are so many model parameters of diesel-engine considered in traditional PID control and these parameters present non-linear characteristic.The method to adjust engine speed using traditional PID is not considered as a best way. Especially for the diesel-engine generator set. In this paper, the Fuzzy PID control strategy is proposed. Some problems about its utilization in electronic speed regulator are discussed. A mathematical model of electric control system for diesel-engine generator set is established and the way of the PID parameters in the model to affect the function of system is analyzed. And then it is proposed the differential coefficient must be applied in control design for reducing dynamic deviation of system and adjusting time. Based on the control theory, a study combined control with PID calculation together for turning fuzzy PID parameter is implemented. And also a simulation experiment about electronic speed regulator system was conducted using Matlab/Simulink and the Fuzzy-Toolbox. Compared with the traditional PID Algorithm, the simulated results presented obvious improvements in the instantaneous speed governing rate and steady state speed governing rate of diesel-engine generator set when the fuzzy logic control strategy used.

  16. To Regulate or Not to Regulate? Views on Electronic Cigarette Regulations and Beliefs about the Reasons for and against Regulation.

    Science.gov (United States)

    Sanders-Jackson, Ashley; Tan, Andy S L; Bigman, Cabral A; Mello, Susan; Niederdeppe, Jeff

    2016-01-01

    Policies designed to restrict marketing, access to, and public use of electronic cigarettes (e-cigarettes) are increasingly under debate in various jurisdictions in the US. Little is known about public perceptions of these policies and factors that predict their support or opposition. Using a sample of US adults from Amazon Mechanical Turk in May 2015, this paper identifies beliefs about the benefits and costs of regulating e-cigarettes and identifies which of these beliefs predict support for e-cigarette restricting policies. A higher proportion of respondents agreed with 8 different reasons to regulate e-cigarettes (48.5% to 83.3% agreement) versus 7 reasons not to regulate e-cigarettes (11.5% to 18.9%). The majority of participants agreed with 7 out of 8 reasons for regulation. When all reasons to regulate or not were included in a final multivariable model, beliefs about protecting people from secondhand vapor and protecting youth from trying e-cigarettes significantly predicted stronger support for e-cigarette restricting policies, whereas concern about government intrusion into individual choices was associated with reduced support. This research identifies key beliefs that may underlie public support or opposition to policies designed to regulate the marketing and use of e-cigarettes. Advocates on both sides of the issue may find this research valuable in developing strategic campaigns related to the issue. Specific beliefs of potential benefits and costs of e-cigarette regulation (protecting youth, preventing exposure to secondhand vapor, and government intrusion into individual choices) may be effectively deployed by policy makers or health advocates in communicating with the public.

  17. To Regulate or Not to Regulate? Views on Electronic Cigarette Regulations and Beliefs about the Reasons for and against Regulation.

    Directory of Open Access Journals (Sweden)

    Ashley Sanders-Jackson

    Full Text Available Policies designed to restrict marketing, access to, and public use of electronic cigarettes (e-cigarettes are increasingly under debate in various jurisdictions in the US. Little is known about public perceptions of these policies and factors that predict their support or opposition.Using a sample of US adults from Amazon Mechanical Turk in May 2015, this paper identifies beliefs about the benefits and costs of regulating e-cigarettes and identifies which of these beliefs predict support for e-cigarette restricting policies.A higher proportion of respondents agreed with 8 different reasons to regulate e-cigarettes (48.5% to 83.3% agreement versus 7 reasons not to regulate e-cigarettes (11.5% to 18.9%. The majority of participants agreed with 7 out of 8 reasons for regulation. When all reasons to regulate or not were included in a final multivariable model, beliefs about protecting people from secondhand vapor and protecting youth from trying e-cigarettes significantly predicted stronger support for e-cigarette restricting policies, whereas concern about government intrusion into individual choices was associated with reduced support.This research identifies key beliefs that may underlie public support or opposition to policies designed to regulate the marketing and use of e-cigarettes. Advocates on both sides of the issue may find this research valuable in developing strategic campaigns related to the issue.Specific beliefs of potential benefits and costs of e-cigarette regulation (protecting youth, preventing exposure to secondhand vapor, and government intrusion into individual choices may be effectively deployed by policy makers or health advocates in communicating with the public.

  18. 76 FR 14590 - Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and...

    Science.gov (United States)

    2011-03-17

    ... makes it unlikely that a small business could afford to sustain the infrastructure required to perform...-AG73 Defense Federal Acquisition Regulation Supplement; Safety of Facilities, Infrastructure, and... facilities, infrastructure, and equipment that are intended for use by military or civilian personnel of the...

  19. Electronic Medical Record Documentation of Driving Safety for Veterans with Diagnosed Dementia.

    Science.gov (United States)

    Vair, Christina L; King, Paul R; Gass, Julie; Eaker, April; Kusche, Anna; Wray, Laura O

    2018-01-01

    Many older adults continue to drive following dementia diagnosis, with medical providers increasingly likely to be involved in addressing such safety concerns. This study examined electronic medical record (EMR) documentation of driving safety for veterans with dementia (N = 118) seen in Veterans Affairs primary care and interdisciplinary geriatrics clinics in one geographic region over a 10-year period. Qualitative directed content analysis of retrospective EMR data. Assessment of known risk factors or subjective concerns for unsafe driving were documented in fewer than half of observed cases; specific recommendations for driving safety were evident for a minority of patients, with formal driving evaluation the most frequently documented recommendation by providers. Utilizing data from actual clinical encounters provides a unique snapshot of how driving risk and safety concerns are addressed for veterans with dementia. This information provides a meaningful frame of reference for understanding potential strengths and possible gaps in how this important topic area is being addressed in the course of clinical care. The EMR is an important forum for interprofessional communication, with documentation of driving risk and safety concerns an essential element for continuity of care and ensuring consistency of information delivered to patients and caregivers.

  20. Electronic cigarettes: health impact, nicotine replacement therapy, regulations

    Directory of Open Access Journals (Sweden)

    Zygmunt Zdrojewicz

    2017-03-01

    Full Text Available While the adverse effects of conventional cigarettes on human health have been thoroughly examined, in the last 15 years we have witnessed the birth of electronic cigarettes. There are many types of these devices available on the market. Studies are still underway to determine their negative impact on the human body. Electronic cigarettes comprise of power supply and a vaporising system. The user inhales the aerosol produced by heating up the liquid containing nicotine. In contrast with conventional cigarettes, the tobacco is not combusted, thus the compositions of the aerosol and cigarette smoke are considerably different. Out of 93 chemical substances present in the e-cigarette smoke, the aerosol contains only acetaldehyde, acetone, acrolein, formaldehyde and nicotine. More toxic substances, such as polycyclic aromatic hydrocarbons and heavy metals, are not present. The amount of evidence suggesting electronic cigarettes’ harmful effects on the human body is constantly increasing. Some reports imply that the electronic cigarettes negatively influence pregnancy, human psyche, respiratory and cardiovascular systems. They might also be involved in oncogenesis. With electronic cigarettes constantly gaining popularity, the question about the adverse effects of passive smoking becomes increasingly more relevant. Although various methods of helping people cease smoking or delivering nicotine to their bodies without burning toxic substances are being explored, electronic cigarettes are not recommended in nicotine substitution therapy. Legal regulations regarding electronic cigarettes are still being worked on. The purpose of this paper is to evaluate the effects electronic cigarettes have on the human’s health.

  1. Radiological and the other safety aspects in the operation of electron beam facility

    International Nuclear Information System (INIS)

    Loterina, Roel Alamares

    2003-01-01

    The radiological safety aspects of the operation of an electron beam facility in general and the 3 MeV ALURTRON electron beam facility of the Malaysian Institute of Nuclear Technology Research (MINT) in particular were reviewed and evaluated. Evaluation was made based on existing records as well as actual monitoring around facility. Area monitoring results using TLDs are within permissible levels. The maximum reading of 7.29 mSv measured in year 2000 is very low as compared to the annual dose limit of 50 mSv/year. In general, the shielding for the installation is adequate and no significant radiation leakage were detected based on radiation survey results. However, measured radiation levels with a maximum of 1.9 mSv/h at the sampling ports easily exceed the limit of 25μSv/h. The facility is equipped with safety features, such as interlocked system, adequate shielding, engineered safety design of irradiation and accelerator rooms, and accessories such as conveyor system and product handling system. Warning lights and signals are adequately installed around the facility. Other identified hazards that may affect the operator, workers, and personnel were also evaluated based on previous records of monitoring. The ozone concentration levels with a maximum reading of 0.05 ppm measured in the environment of the facility are within the threshold limit value of 0.1 ppm. The measured noise levels at all locations around facility are generally below the maximum permissible level of 80dB. The ALURTRON has achieved a minimum safety requirement to warrant its full operation without relying on administrative controls and procedures to ensure safety in operation. (Auth.)

  2. A task management system for compliance with health, safety, and environmental regulations

    International Nuclear Information System (INIS)

    Crump, J.J.; O'Gorman, T.P.

    1992-01-01

    Shell Western E and P Inc. (SWEPI) has developed a new computer system to help it comply with health, safety, and environmental (HS and E) regulations. It is a task management system that functions at the detailed inventory level. It schedules work, instructs operations, and records compliance status. This article discusses design and development of the system

  3. The UK system for regulating the long-term safety of radioactive waste disposal

    International Nuclear Information System (INIS)

    Duncan, A.

    1997-01-01

    The general system is described for regulation of disposal of solid, long-lived radioactive wastes. The relevant Government policy is outlined, and the framework of legislation and arrangements for implementation, the associated guidance produced by regulatory bodies and the approach to assessment by regulators of a safety case for radioactive waste disposal are reported. Also, for the purposes of discussion in the Workshop, some of the practical issues are considered which are still in development in the UK in regard to regulatory methodology. (author)

  4. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  5. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  6. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (French Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    The IAEA's Statute authorizes the Agency to ''establish or adopt standards of safety for protection of health and minimization of danger to life and property'' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the

  7. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Chinese Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  8. Regulations for the Safe Transport of Radioactive Material. 2012 Edition. Specific Safety Requirements (Arabic Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    The IAEA's Statute authorizes the Agency to 'establish or adopt' standards of safety for protection of health and minimization of danger to life and property' - standards that the IAEA must use in its own operations, and which States can apply by means of their regulatory provisions for nuclear and radiation safety. The IAEA does this in consultation with the competent organs of the United Nations and with the specialized agencies concerned. A comprehensive set of high quality standards under regular review is a key element of a stable and sustainable global safety regime, as is the IAEA's assistance in their application. The IAEA commenced its safety standards programme in 1958. The emphasis placed on quality, fitness for purpose and continuous improvement has led to the widespread use of the IAEA standards throughout the world. The Safety Standards Series now includes unified Fundamental Safety Principles, which represent an international consensus on what must constitute a high level of protection and safety. With the strong support of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its standards. Standards are only effective if they are properly applied in practice. The IAEA's safety services encompass design, siting and engineering safety, operational safety, radiation safety, safe transport of radioactive material and safe management of radioactive waste, as well as governmental organization, regulatory matters and safety culture in organizations. These safety services assist Member States in the application of the standards and enable valuable experience and insights to be shared. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA's standards for use in their national regulations. For parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions

  9. Consideration of timescales in the finnish safety regulations for spent fuel disposal

    International Nuclear Information System (INIS)

    Ruokola, E.

    2010-01-01

    Esko Ruokola (STUK) presented an example of regulatory approach and explained that the Finnish spent fuel disposal program is progressing towards the construction license stage. The Government Decree on the Safety of Nuclear Waste Disposal which entered into force on 1 St December 2008 will be detailed by a STUK Guide that is currently being updated. These regulations distinguish three post-closure time periods for which different safety criteria are defined: The Environmentally Predictable Future: During this first period, extending up to several thousands of years, predictable environmental changes will occur. People may be exposed to the disposed radioactive substances only due to limited early failures of engineered barriers, due to e.g. fabrication defects. Disposal shall be so designed that as a consequence of expected evolutions: 1. The annual dose to the most exposed members of the public shall remain below 0.1 mSv. 2. The average annual doses to other members of the public shall remain insignificantly low. STUK provides guidance for the different elements of the safety assessment including potential exposure pathways, potential changes in the environment to be considered, assumption on climate change and human habits, as well as the reference conditions for the most exposed individual and people living in the surroundings. Era of Extreme Climate Changes: Beyond about 10 000 years, great climatic changes, such as permafrost and glaciation, will occur and a conservative approach is followed. For this time period, the radiation protection criteria are based on release rates of radionuclides from the geosphere to biosphere (geo-bio flux constraints). The STUK guide specifies the nuclide specific constraints for the activity release to the environment for individual radionuclides. The selected approach by STUK implies that the implementer need not to consider the biosphere scenarios when preparing his safety case for the time period discussed as the regulator

  10. Electronic nicotine delivery systems: a research agenda.

    Science.gov (United States)

    Etter, Jean-François; Bullen, Chris; Flouris, Andreas D; Laugesen, Murray; Eissenberg, Thomas

    2011-05-01

    Electronic nicotine delivery systems (ENDS, also called electronic cigarettes or e-cigarettes) are marketed to deliver nicotine and sometimes other substances by inhalation. Some tobacco smokers report that they used ENDS as a smoking cessation aid. Whether sold as tobacco products or drug delivery devices, these products need to be regulated, and thus far, across countries and states, there has been a wide range of regulatory responses ranging from no regulation to complete bans. The empirical basis for these regulatory decisions is uncertain, and more research on ENDS must be conducted in order to ensure that the decisions of regulators, health care providers and consumers are based on science. However, there is a dearth of scientific research on these products, including safety, abuse liability and efficacy for smoking cessation. The authors, who cover a broad range of scientific expertise, from basic science to public health, suggest research priorities for non-clinical, clinical and public health studies. They conclude that the first priority is to characterize the safety profile of these products, including in long-term users. If these products are demonstrated to be safe, their efficacy as smoking cessation aids should then be tested in appropriately designed trials. Until these studies are conducted, continued marketing constitutes an uncontrolled experiment and the primary outcome measure, poorly assessed, is user health. Potentially, this research effort, contributing to the safety and efficacy of new smoking cessation devices and to the withdrawal of dangerous products, could save many lives.

  11. Hazardous substances in electronics: the effects of European Union risk regulation on China

    NARCIS (Netherlands)

    Biedenkopf, K.

    2012-01-01

    This article argues that European Union (EU) risk regulation of hazardous substances in electrical and electronic equipment (EEE) was both a trigger and formative factor in the development of similar Chinese regulation. The attractiveness and global interdependence of the EU market in EEE impelled a

  12. Photosynthetic control of electron transport and the regulation of gene expression.

    Science.gov (United States)

    Foyer, Christine H; Neukermans, Jenny; Queval, Guillaume; Noctor, Graham; Harbinson, Jeremy

    2012-02-01

    The term 'photosynthetic control' describes the short- and long-term mechanisms that regulate reactions in the photosynthetic electron transport (PET) chain so that the rate of production of ATP and NADPH is coordinated with the rate of their utilization in metabolism. At low irradiances these mechanisms serve to optimize light use efficiency, while at high irradiances they operate to dissipate excess excitation energy as heat. Similarly, the production of ATP and NADPH in ratios tailored to meet demand is finely tuned by a sophisticated series of controls that prevents the accumulation of high NAD(P)H/NAD(P) ratios and ATP/ADP ratios that would lead to potentially harmful over-reduction and inactivation of PET chain components. In recent years, photosynthetic control has also been extrapolated to the regulation of gene expression because mechanisms that are identical or similar to those that serve to regulate electron flow through the PET chain also coordinate the regulated expression of genes encoding photosynthetic proteins. This requires coordinated gene expression in the chloroplasts, mitochondria, and nuclei, involving complex networks of forward and retrograde signalling pathways. Photosynthetic control operates to control photosynthetic gene expression in response to environmental and metabolic changes. Mining literature data on transcriptome profiles of C(3) and C(4) leaves from plants grown under high atmospheric carbon dioxide (CO(2)) levels compared with those grown with ambient CO(2) reveals that the transition to higher photorespiratory conditions in C(3) plants enhances the expression of genes associated with cyclic electron flow pathways in Arabidopsis thaliana, consistent with the higher ATP requirement (relative to NADPH) of photorespiration.

  13. Fog lamp regulation as a safety measure to reduce risk in fog conditions.

    NARCIS (Netherlands)

    Oppe, S.

    1992-01-01

    This short note summarizes the relevant aspects for a decision concerning the fog lamp use regulation. Most motorway accidents in the Netherlands took place in fog conditions in the early morning hours. The safety problem in fog conditions is a serious problem caused by bad driving behaviour. The

  14. Mapping medical marijuana: state laws regulating patients, product safety, supply chains and dispensaries, 2017.

    Science.gov (United States)

    Klieger, Sarah B; Gutman, Abraham; Allen, Leslie; Pacula, Rosalie Liccardo; Ibrahim, Jennifer K; Burris, Scott

    2017-12-01

    (1) To describe open source legal data sets, created for research use, that capture the key provisions of US state medical marijuana laws. The data document how state lawmakers have regulated a medicine that remains, under federal law, a Schedule I illegal drug with no legitimate medical use. (2) To demonstrate the variability that exists across states in rules governing patient access, product safety and dispensary practice. Two legal researchers collected and coded state laws governing marijuana patients, product safety and dispensaries in effect on 1 February 2017, creating three empirical legal data sets. We used summary tables to identify the variation in specific statutory provisions specified in each state's medical marijuana law as it existed on 1 February 2017. We compared aspects of these laws to the traditional Federal approach to regulating medicine. Full data sets, codebooks and protocols are available through the Prescription Drug Abuse Policy System (http://www.pdaps.org/; Archived at http://www.webcitation.org/6qv5CZNaZ on 2 June 2017). Twenty-eight states (including the District of Columbia) have authorized medical marijuana. Twenty-seven specify qualifying diseases, which differ across states. All states protect patient privacy; only 14 protect patients against discrimination. Eighteen states have mandatory product safety testing before any sale. While the majority have package/label regulations, states have a wide range of specific requirements. Most regulate dispensaries (25 states), with considerable variation in specific provisions such as permitted product supply sources number of dispensaries per state and restricting proximity to various types of location. The federal ban in the United States on marijuana has resulted in a patchwork of regulatory strategies that are not uniformly consistent with the approach usually taken by the Federal government and whose effectiveness remains unknown. © 2017 Society for the Study of Addiction.

  15. Radiological safety aspects of the operation of electron linear accelerators

    International Nuclear Information System (INIS)

    Swanson, W.P.

    1979-01-01

    This manual is intended as a guide for the planning and implementation of radiation protection programmes for all types of electron linear accelerators. Material is provided for guidance in the planning and installation stages, as well as for the implementation of radiation protection for continuing operations. Because of their rapidly growing importance, the problems of installation and radiation safety of standard medical and industrial accelerators are discussed in separate sections. Special discussions are devoted to the radiation protection problems unique to electron accelerators: thick-target bremsstrahlung, the electromagnetic cascade, the estimation of secondary-radiation yields from thick targets, and instrumental corrections for accelerator duty factor. In addition, an extensive review of neutron production is given which includes new calculations of neutron production in various materials. A recalculation of activation in a variety of materials has been done for this manual, and specific gamma-ray constants have been recalculated for a number of nuclides to take into account the contribution of K X-rays. The subjects of air and water activation, as well as toxic gas production in air have been specially reviewed. Betatrons and electron microtrons operating at the same energy produce essentially the same kind of secondary radiation as electron linacs and the material given in this manual is directly applicable to them

  16. Harmonization of legislation and regulations to achieve food safety: US and Canada perspective.

    Science.gov (United States)

    Keener, Larry; Nicholson-Keener, Sophia M; Koutchma, Tatiana

    2014-08-01

    Trade in food and food ingredients among the nations of the world is rapidly expanding and, with this expansion, new supply chain partners, from globally disparate geographic regions, are being enrolled. Food and food ingredients are progressively sourced more from lesser developed nations. Food safety incidents in the USA and Canada show a high unfavorable correlation between illness outbreaks and imported foods. In the USA, for example, foodborne disease outbreaks caused by imported food appeared to rise in 2009 and 2010, and nearly half of the outbreaks, associated with imported food, implicated foods imported from areas which previously had not been associated with outbreaks. Projecting supply chains into new geographical regions raises serious questions about the capacity of the new supply chain partners to provide the requisite regulatory framework and sufficiently robust public health measures for ensuring the safety of the foods and foodstuffs offered for international trade. The laws, regulation and legislation among the many nations participating in the global food trade are, at best, inconsistent. These inconsistencies frequently give rise to trade disputes and cause large quantities of food to be at risk of destruction on the often dubious pretext that they are not safe. Food safety is often viewed through a political or normative lens. Often as not, this lens has been wrought absent scientific precision. Harmonization of food safety legislation around sound scientific principles, as advocated by the US Food Safety Modernization Act (FSMA), would ultimately promote trade and likely provide for incremental improvement in public health. Among the priority roles of most national governments are the advancement of commerce and trade, preservation of public health and ensuring domestic tranquility. Achieving these priorities is fundamental to creating and preserving the wealth of nations. Countries such as the Netherlands, Canada, Germany, Japan and the USA

  17. 75 FR 36288 - Amended Safety Zone and Regulated Navigation Area, Chicago Sanitary and Ship Canal, Romeoville, IL

    Science.gov (United States)

    2010-06-25

    ...The Coast Guard is revising its safety zone and Regulated Navigation Area (RNA) on the Chicago Sanitary and Ship Canal (CSSC) near Romeoville, IL. This revised temporary interim rule reduces the areas covered by the safety zone and RNA, and places additional restrictions on vessels that may transit the RNA.

  18. Outline of safety regulations and administrations for commercial nuclear power plants in Japan

    International Nuclear Information System (INIS)

    Kinichi Yamamoto

    1987-01-01

    Outline of safety regulations and administrations for the commercial nuclear power plants in Japan is briefly described. The strict measures for safety assurance are always taken based on the principle of defense-indepth. In the actual procedures of regulatory control, the examinations and inspections shall be performed at each individual step in the stage of applications, and also in the stage of constructions. Thus, those regulatory examinations and inspections shall be performed in detail and carefully, and at the most suitable time; resulting in an effective regulatory control by the Ministry of International Trade and Industry. (author)

  19. Encouraging Maternal Sacrifice: How Regulations Governing the Consumption of Pharmaceuticals During Pregnancy Prioritize Fetal Safety over Maternal Health and Autonomy.

    Science.gov (United States)

    Donley, Greer

    Pregnant women are routinely faced with the stressful decision of whether to consume needed medications during their pregnancies. Because the risks associated with pharmaceutical drug consumption during pregnancy are largely unknown, pregnant women both inadvertently consume dangerous medications and avoid needed drugs. Both outcomes are harmful to pregnant women and their fetuses. This unparalleled lack of drug safety information is a result of ill-conceived, paternalistic regulations in two areas of the law: regulations governing ethical research in human subjects and regulations that dictate the required labels on drugs. The former categorizes pregnant women as "vulnerable" and thus precludes them from most medical research. The result is that ninety-one percent of drugs lack any reliable safety information for pregnant consumers. The latter currently requires all drug labels to encourage drug avoidance during pregnancy, despite ample evidence that avoiding needed medications can harm pregnant women. On June 30, 2015, new pregnancy labeling regulations took effect. Though these regulations make important improvements, they continue to treat pregnant women unlike any population, including other unique subpopulations, such as children. As a result, the new regulations do not fix the problem of over-warning pregnant women about the risks of drug consumption. This article questions the legitimacy of both regulations and suggests three reforms for how to improve access to vital safety information: (1) amend the regulations governing ethical research in human subjects to reclassify pregnant women as non-vulnerable adults; (2) create incentives to generate safety data in pregnant women by granting a period of market exclusivity for drug companies that invest in this research; and (3) make the FDA pregnancy labeling regulations consistent with the routine FDA practice of requiring the display of balanced, human data on risk.

  20. The Regulation Of Electronic Money Institutions In The SADC Region: Some Lessons From The EU

    Directory of Open Access Journals (Sweden)

    Mmaphuti David Tuba

    2014-12-01

    Full Text Available This article analyses the different approaches adopted for the regulation of payment systems in a variety of legislative instruments by the European Union (EU. It looks in particular at how the institutions that issue new electronic money products are regulated and supervised by the relevant authorities in the EU, in comparison with existing institutions such as banks. It analyses some of the lessons that may be learned by the South African Development Corporation (SADC from the regulatory approaches for electronic money institutions adopted by the EU. The article asks if the approach adopted by the EU may be useful for the future regulation of electronic money institutions in the SADC. The proliferation of electronic devices that arrived with the invention of the Internet has sparked some regulatory challenges. This development has become global and involves both developed and developing countries, including regions such as the SADC. It is asked if these technological developments should be addressed by means of a concrete regulatory framework while they continue to develop, instead of the regulators waiting to observe and acquaint themselves with the relevant regulatory challenges that underpin the innovations. The EU has attempted to address the anticipated regulatory challenges that came about with the development of electronic money and to align its regulatory approach with other payment systems. This article discusses the regulatory approaches adopted in the EU and provides an overview that the SADC may use in order to adopt an effective regulatory framework for electronic money and the institutions that issue these methods of payment. It analyses both the achievements and the challenges that the EU faced (and continues to face in developing the regulation of e-money, and recommends some possible approaches derived from the lessons learned.

  1. Electronic licensing filing system development and implementation experience

    International Nuclear Information System (INIS)

    Walderhaug, J.

    1993-01-01

    The Electronic Licensing Filing System (ELFS) is a microcomputer-based integrated document search and retrieval system for the Nuclear Regulatory Affairs Division of Southern California Edison (SCE). ELFS allows the user access to the current licensing basis of a subject by providing an easily searchable electronic information data base consisting of regulatory correspondence, design-bases documentation, licensing documents [updated final safety and analysis report (UFSAR) and technical specifications], and regulatory guidance or directives [10CFR, generic letters, bulletins, notices, circulars, regulatory guides, policy statements, and selected US Nuclear Regulatory Commission (NRC) regulations]. It is used in the preparation of correspondence and submittals to the NRC, 50.59 safety evaluations, design-bases reconstitution, and commitment tracking and management

  2. Developing a strategy for a regulated electronic bioanalytical laboratory.

    Science.gov (United States)

    McDowall, R D

    2014-01-01

    This perspective article considers the strategy, design and implementation of an electronic bioanalytical laboratory working to GLP and/or GCP regulations. There are a range of available automated systems and laboratory informatics that could be implemented and integrated to make an electronic laboratory. However, which are the appropriate ones to select and what is realistic and cost-effective for an individual laboratory? The answer is to develop an overall automation strategy that is updated periodically after each system or application has been implemented to assess if the strategy is still valid or needs to be changed. As many laboratory informatics applications have functional overlap or convergence, for example, Laboratory Information Management System, Electronic Laboratory Notebook, and Instrument and Chromatography Data Systems, the decision of which application performs a specific task needs to be carefully considered in the overall strategy. Ensuring data integrity and regulatory compliance, especially in light of a number of recent falsification cases, is a mandatory consideration for the overall strategy for an electronic bioanalytical laboratory submitting data to regulatory authorities.

  3. Revised technical regulations on radiation protection and safety of 30 September 1975

    International Nuclear Information System (INIS)

    1975-01-01

    These revised technical regulations were made in implementation of Section 4 of Decree No 7/9038 of 30 November 1974 on radiation health and safety and lay down in detail the requirements to be met in Turkey for the use of all types of radiation sources. They set out protection plans and specify the protective equipment to be used as well as the controlled areas, i.e. areas in which radiation sources are used and which must be subject to special safety measures. Finally to obtain a license, users of radiation sources must fill in forms, the models of which are provided, giving their particulars and the specifications of the intended use and activity of the sources. (NEA) [fr

  4. 75 FR 51824 - Food and Drug Administration Clinical Trial Requirements, Regulations, Compliance, and Good...

    Science.gov (United States)

    2010-08-23

    ... discussion include the following: (1) What FDA expects in a pharmaceutical clinical trial; (2) adverse event reporting--science, regulation, error, and safety; (3) Part 11 Compliance--Electronic signatures; (4...

  5. Safety research activities for Japanese regulations of spent fuel interim storage facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    Japan Nuclear Energy Safety Organization (JNES) carries out (a) preparation of technical documents, (b) technical evaluations of standards (prepared by academic societies), etc. and (c) other R and D activities, to support Nuclear Regulation Authority (NRA: which controls the regulations for Spent Fuel Interim Storage Facilities). In 2012 fiscal year, JNES carried out dynamic test of spent fuel to examine the integrity of spent fuel under cask drop accidents, and preparation for PWR spent fuel storage test to prove long term integrity of spent fuel and cask itself. Some of these tests will be also carried out in 2013 fiscal year and after. (author)

  6. White paper on nuclear safety in 2009

    International Nuclear Information System (INIS)

    2009-06-01

    It deals with a general introduction of nuclear safety like general safety, safety regulation and system law and standard. It indicates of nuclear energy facility safety about general safety, safety regulation of operating nuclear power plant safety regulation under constructing nuclear power plant. It deals with radiation facility safety, monitoring of environmental radiation, radiation protection, radiation control, international cooperating on nuclear energy safety and establishment of safety regulation.

  7. A fresh start of nuclear safety regulation and international perspective

    International Nuclear Information System (INIS)

    Oshima, Kenzo

    2013-01-01

    It should be explained more to the outside modestly the Fukushima nuclear accident would be a man-made complex disaster, which might be reluctant to do but not be neglected. Utmost efforts to change inward-looking attitude and reform safety culture should be done so as to prevent superficial reflection of the Fukushima nuclear accident. Since all nuclear regulatory functions ('3S': safety, security, safeguards) were integrated in Nuclear Regulation Authority (NRA), NRA and secretariat of NRA became more responsible for international response, and strengthening of organization system and human resources development would be an urgent necessity. This article described present stage of NRA focusing on international dimension including personal views. Overseas strong concern over the Fukushima nuclear accident and international communications were reviewed. The Fukushima nuclear accident started from natural disaster and enlarged as a man-made complex disaster with many human factors (mainly inaction, wilful negligence) overlapping and safety culture flawed. Examples of overseas and Japanese action plan to learn and absorb lessons from the Fukushima accident were introduced. NRA's started activities on inviting IAEA's IRRS and OPPAS as soon as ready, strengthening nuclear security measures, safeguards to prevent nuclear proliferation, bilateral cooperation and international advisors were also presented. (T. Tanaka)

  8. Impact of Safety-Related Regulations on Codeine Use in Children: A Quasi-Experimental Study Using Taiwan's National Health Insurance Research Database.

    Science.gov (United States)

    Lin, Chih-Wan; Wang, Ching-Huan; Huang, Wei-I; Ke, Wei-Ming; Chao, Pi-Hui; Chen, Wen-Wen; Hsiao, Fei-Yuan

    2017-07-01

    Safety concerns regarding potential life-threatening adverse events associated with codeine have resulted in policy decisions to restrict its use in pediatrics. However, whether these drug safety communications have had an immediate and strong impact on codeine use remains in question. We aimed to investigate the impact of the two implemented safety-related regulations (label changes and reimbursement regulations) on the use of codeine for upper respiratory infection (URI) or cough. A quasi-experimental study was performed using Taiwan's National Health Insurance Research Database. Quarterly data of codeine prescription rates for URI/cough visits were reported, and an interrupted time series design was used to assess the impact of the safety regulations on the uses of codeine among children with URI/cough visits. Multivariable logistic regression models were used to explore patient and provider characteristics associated with the use of codeine. The safety-related regulations were associated with a significant reduction in codeine prescription rates of -4.24% (95% confidence interval [CI] -4.78 to -3.70), and the relative reduction compared with predicted rates based on preregulation projections was 60.4, 56.6, and 53.2% in the first, second, and third year after the regulations began, respectively. In the postregulation period, physicians specializing in otolaryngology (odds ratio [OR] 1.47, 95% CI 1.45-1.49), practicing in district hospitals (OR 6.84, 95% CI 5.82-8.04) or clinics (OR 6.50, 95% CI 5.54-7.62), and practicing in the least urbanized areas (OR 1.60, 95% CI 1.55-1.64) were more likely to prescribe codeine to children than their counterparts. Our study provides a successful example of how to effectively reduce the codeine prescriptions in children in the 'real-world' settings, and highlights areas where future effort could be made to improve the safety use of codeine. Future research is warranted to explore whether there was a simultaneous decrease in

  9. Use of risk information to safety regulation. Reprocessing facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    A procedure of probabilistic risk assessment (PRA) for a reprocessing facility has been under the development aiming to utilize risk information for safety regulations in this project. Activities in the fiscal year 2012 are summarized in the paper. A major activity is a fundamental study on a concept of serious accidents, requirements of serious accident management, and a policy of utilizing risk information for fabrication and reprocessing facilities. Other than the activity a study on release and transport of aerial radioactive materials at a serious accident in a reprocessing facility has been conducted. The outline and results are provided in the chapter 1 and 2 respectively. (author)

  10. Facilities management and industrial safety

    International Nuclear Information System (INIS)

    2003-06-01

    This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

  11. CANDU reactors, their regulation in Canada, and the identification of relevant NRC safety issues

    International Nuclear Information System (INIS)

    Charak, I.; Kier, P.H.

    1995-04-01

    Atomic Energy of Canada, Limited (AECL) and its subsidiary in the US, are considering submitting the CANDU 3 design for standard design certification under 10 CFR Part 52. CANDU reactors are pressurized heavy water power reactors. They have some substantially different safety responses and safety systems than the LWRs that the commercial power reactor licensing regulations of the US Nuclear Regulatory Commission (NRC) have been developed to deal with. In this report, the authors discuss the basic design characteristics of CANDU reactors, specifically of the CANDU 3 where possible, and some safety-related consequences of these characteristics. The authors also discuss the Canadian regulatory provisions, and the CANDU safety systems that have evolved to satisfy the Canadian regulatory requirements as of December 1992. Finally, the authors identify NRC regulations, mainly in 10 CFR Parts 50 and 100, with issues for CANDU 3 reactor designs. In all, eleven such regulatory issues are identified. They are: (1) the ATWS rule (section 50.62); (2) station blackout (section 50.63); (3) conformance with Standard Review Plan (SRP); (4) appropriateness of the source term (section 50.34(f) and section 100.11); (5) applicability of reactor coolant pressure boundary (RCPB) requirements (section 50.55a, etc); (6) ECCS acceptance criteria (section 50.46)(b); (7) combustible gas control (section 50.44, etc); (8) power coefficient of reactivity (GDC 11); (9) seismic design (Part 100); (10) environmental impacts of the fuel cycle (section 51.51); and (11) (standards section 50.55a)

  12. Vapers' perspectives on electronic cigarette regulation in Australia.

    Science.gov (United States)

    Fraser, Doug; Weier, Megan; Keane, Helen; Gartner, Coral

    2015-06-01

    The use of electronic cigarettes (e-cigarettes), also known as personal vaporisers (PVs), has increased rapidly in Australia despite legal barriers to the sale, possession and use of nicotine for non-therapeutic purposes. Australia is one of many countries in the process of developing regulations for these devices yet knowledge of consumers' views on e-cigarette regulation is lacking. An online survey was completed by 705 e-cigarette users recruited online. Participants answered questions about their smoking history, e-cigarette use, as well as their opinions on appropriate regulation of e-cigarettes. Most participants were male (71%), employed (72%), and highly educated (68% held post-school qualification). They tended to be former heavy smokers who had stopped smoking entirely and were currently vaping. Participants generally agreed that the government should enforce minimum labelling and packaging standards and there was majority support for minimum quality standards. Most supported making e-cigarettes available for sale to anyone over the age of 18, but expressed concern about the government's motivation for regulating e-cigarettes. There was strong opposition to restricting sales to a medicines framework (prescription only or pharmacy only sales). E-cigarette users in Australia are in favour of e-cigarettes being regulated as long as those regulations do not impede their ability to obtain devices and refill solutions, which they view as important for them to remain smoke free. These views align with some aspects of appropriate policy designed to maximise the public health potential of e-cigarettes in society, but conflict with some of the proposed regulatory models. Governments should consider how future regulation of e-cigarettes will affect current consumers while helping to maximise the number of smokers who switch to e-cigarettes and minimise the possibility of non-smokers becoming addicted to nicotine. Copyright © 2015 The Authors. Published by Elsevier

  13. Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

    International Nuclear Information System (INIS)

    2015-01-01

    IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

  14. Model Regulations for the Use of Radiation Sources and for the Management of the Associated Radioactive Waste. Supplement to IAEA Safety Standards Series No. GS-G-1.5

    International Nuclear Information System (INIS)

    2013-12-01

    IAEA Safety Standards Series No. GSR Part 1, Governmental, Legal and Regulatory Framework for Safety, requires that governments establish laws and statutes to make provisions for an effective governmental, legal and regulatory framework for safety. The framework for safety includes the establishment of a regulatory body. The regulatory body has the authority and responsibility for promulgating regulations, and for preparing their implementation. This publication provides advice on an appropriate set of regulations covering all aspects of the use of radiation sources and the safe management of the associated radioactive waste. The regulations provide the framework for the regulatory requirements and conditions to be incorporated into individual authorizations for the use of radiation sources in industry, medical facilities, research and education and agriculture. The regulations also establish criteria to be used for assessing compliance. This publication allows States to appraise the adequacy of their existing regulations and regulatory guides, and can be used as a reference for those States developing regulations for the first time. The regulations set out in this publication will need to be adapted to take account of local conditions, technical resources and the scale of facilities and activities in the State. The set of regulations in this publication is based on the requirements established in the IAEA safety standards series, in particular in IAEA Safety Standards Series No. GSR Part 3 (Interim), Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards, in IAEA Safety Standards Series No. GSR Part 5, Predisposal Management of Radioactive Waste, and in IAEA Safety Standards Series No. SSR-5, Disposal of Radioactive Waste. They are also derived from the Code of Conduct of the Safety and Security of Radiation Sources and the Guidance on the Import and Export of Radioactive Sources. This publication allows States to appraise the

  15. Influence of safety vlave pressure on gelled electrolyte valve-regulated lead/acid batteries under deep cycling applications

    International Nuclear Information System (INIS)

    Oh, Sang Hyub; Kim, Myung Soo; Lee, Jin Bok; Lee, Heung Lark

    2002-01-01

    Cycle life tests have been carried out to evaluate the influence of safety valve pressure on vlave regulated lead/acid batteries under deep cycling applications. Batteries were cycled at 5 hour rates at 100 % DOD, and safety valve pressure was set to 1.08 and 2.00 bar, respectively. The batteries lost 248.3 g of water for each case after about 1,200 cycles, but the cyclic performances of the batteries were comparable. Most of the gas of the battery during discharging was hydrogen, and the oxygen concentration increased to 18 % after 3 hours of charging. The micro structure of the positive active materials was completely changed and the corrosion layer of the positive grid was less than 50 μm, regardless of the pressure of the safety valve after cycle life tests. The cause of discharge capacity decrease was found to water loss and the shedding of the positive active materials. The pressure of safety valve does not give little effect to the cyclic performance and the failure modes of the gelled electrolyte valve-regulated lead acid batteries

  16. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    International Nuclear Information System (INIS)

    2007-01-01

    The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer-based systems used in Nuclear Power Plants for safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national policies and in revisions of guidelines; - as a reference in safety cases and demonstrations of safety of software based systems; - as guidance for system design specifications by manufacturers and major I and C suppliers on the international market. The task force decided at an early stage to focus attention on computer based systems used in Nuclear Power Plants for the implementation of safety functions; namely, those systems classified by the IAEA as 'Safety Systems'. Therefore, recommendations of this report - except those of chapter 1.11 - primarily address 'safety systems' and not 'safety related systems'. It was felt that the most difficult aspects of the licensing of digital programmable systems are rooted in the specific properties of the technology. The objective was therefore to delineate practical and technical licensing guidance, rather than discussing or proposing basic principles or requirements. The design requirements and the basic principles of nuclear safety in force in each member state are assumed to remain applicable. This report represents the consensus view achieved by the experts who contributed to the task force. It is the result of what was at the time of its initiation a first attempt at the international level to achieve consensus among nuclear regulators on practical methods for

  17. Access, interest, and attitudes toward electronic communication for health care among patients in the medical safety net.

    Science.gov (United States)

    Schickedanz, Adam; Huang, David; Lopez, Andrea; Cheung, Edna; Lyles, C R; Bodenheimer, Tom; Sarkar, Urmimala

    2013-07-01

    Electronic and internet-based tools for patient-provider communication are becoming the standard of care, but disparities exist in their adoption among patients. The reasons for these disparities are unclear, and few studies have looked at the potential communication technologies have to benefit vulnerable patient populations. To characterize access to, interest in, and attitudes toward internet-based communication in an ethnically, economically, and linguistically diverse group of patients from a large urban safety net clinic network. Observational, cross-sectional study Adult patients (≥ 18 years) in six resource-limited community clinics in the San Francisco Department of Public Health (SFDPH) MAIN MEASURES: Current email use, interest in communicating electronically with health care professionals, barriers to and facilitators of electronic health-related communication, and demographic data-all self-reported via survey. Sixty percent of patients used email, 71 % were interested in using electronic communication with health care providers, and 19 % reported currently using email informally with these providers for health care. Those already using any email were more likely to express interest in using it for health matters. Most patients agreed electronic communication would improve clinic efficiency and overall communication with clinicians. A significant majority of safety net patients currently use email, text messaging, and the internet, and they expressed an interest in using these tools for electronic communication with their medical providers. This interest is currently unmet within safety net clinics that do not offer a patient portal or secure messaging. Tools such as email encounters and electronic patient portals should be implemented and supported to a greater extent in resource-poor settings, but this will require tailoring these tools to patients' language, literacy level, and experience with communication technology.

  18. International laser-safety regulations: a status update

    Science.gov (United States)

    Weiner, Robert M.

    1990-07-01

    There is an increase in international laser safety requirements as part of the emphasis on world-wide standardization of products and regulations. In particular the documents which will evolve from the 1992 consolidation efforts of the European Community (EC) will impact both laser manufacturers and users. This paper provides a discussion of the current status of the various laser radiation standards. NORTH AMERICAN REQUIREMENTS United States Requirements on manufacturers from the Food and Drug Administration (FDA) have been in effect since 1975. The Center for Devices and Radiological Health (CDRH) within that agency ensures that these mandatory requirements [1] are satisfied. The CDRH regulations include the division of products into classes depending on their potential for hazard criteria for power measurement and requirements for product features labels and manuals and records and reports. Manufacturers must test products and certify that they comply with the CDRH requirements. User requirements are found in a standard published by the American National Standards Institute (ANSI) and in requirements from several individual states. Specific ANSI standards have also been published for fiber communications systems [34] and for lasers in medical applications [35]. Please note that the Appendix includes additional information on the standards discussed in this paper including sources for obtaining the documents. Canada In the past Canada has had requirements for two specified product categories (bar code scanners and educational lasers) [26 These will be replaced

  19. Resolution No. 6/04 Regulations for the recognition of the competence of services for radiation safety

    International Nuclear Information System (INIS)

    2004-01-01

    This Regulation aims to establish the rules that govern the process to recognize the competence of services for radiation safety, they are no authorized under Resolution No. 25, dated May 29, 1998, the Ministry of Science, Technology and Environment, A uthorization Regulation Practices Associated with Use of Ionizing Radiation , in order to ensure that services that are related to the practices associated with the use of nuclear energy, with the requisite expertise. This Regulation applies to all natural or legal persons performing or purporting to perform service activities for radiation safety in the country. These services are: 2.1. Individual Radiation Monitoring Services, in one or more of the following areas: 2.1.1. Control of external exposure a) Electromagnetic Radiation. b) beta radiation. c) neutron radiation. 2.1.2. Control of internal contamination a) Determination of internal contamination by direct measurements. b) Determination of internal contamination by analysis of biological samples. c) Monitoring of air, personal and total. 2.2. Service environmental measurements and samples. 2.3. Service control radioactive contamination in foods. 2.4. Service measuring dose rate, surface contamination and air pollution. 2.5. Calibration and verification of equipment. 2.6. Service courses in radio-logical protection. 2.7. Consultancy services in radiation protection. 2.8. Service control radioactive contamination in scrap. 2.9. Service quality control equipment that is used in the practices associated with the use of ionizing radiation. 2.10. Any other service in the field of radiation safety in scope and interest of end-National Center for Nuclear Safety.

  20. Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material. Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2010-01-01

    This Safety Guide provides recommendations on achieving and demonstrating compliance with IAEA Safety Standards Series No. TS-R-1, Regulations for the Safe Transport of Radioactive Material, 2005 Edition, establishing safety requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material; these include the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Series No. TS-G-1.1, 2002 Edition

  1. Cooperative development of nuclear safety regulations, guides and standards based on NUSS

    International Nuclear Information System (INIS)

    Pachner, J.; Boyd, F.C.; Yaremy, E.M.

    1984-10-01

    In 1983, the Atomic Energy Control Board and Atomic Energy of Canada Limited conducted a study of a possible joint program involving Canada, a nuclear power plant importing Member State and the IAEA for the development of the national nuclear safety regulations and guides based on NUSS documents. During the study, a work plan with manpower estimates for the development of design was prepared as an investigatory exercise. The work plan suggests that a successful NUSS implementation in developing Member States will require availability of significant resources at the start of the program. The study showed that such a joint program could provide an effective mechanism for transfer of nuclear safety know-how to the developing Member States through NUSS implementation

  2. Accidents and Apathy: The Construction of the 'Robens Philosophy' of Occupational Safety and Health Regulation in Britain, 1961-1974.

    Science.gov (United States)

    Sirrs, Christopher

    2016-02-01

    The 1972 Robens Report is widely regarded to have provided the underlying rationale for the 'modern' system of occupational health and safety regulation in Britain, embodied in the Health and Safety at Work Act (HSW Act) 1974. The HSW Act advanced a new, more flexible system of regulation, premised on the ideal of self-regulation by industry. This article advances a more nuanced historical understanding of the Report and its ethos-the 'Robens philosophy'-than hitherto developed, situating its assumptions about accidents, regulation and the role of the state in the social, economic and political context of Britain in the 1960s and early 1970s. Highlighting the interaction between these trends and long-established regulatory practices, the article argues that the turn to 'self-regulation' heralded by the Robens Report was highly convincing from a political and regulatory perspective at the time it was promulgated.

  3. ELECTRONIC CONTROL FOR FUEL SUPPLY OF DIESEL ENGINE ON THE BASIS OF PROGRAMMABLE PID-REGULATOR

    Directory of Open Access Journals (Sweden)

    A. G. Bakhanovich

    2017-01-01

    Full Text Available The article presents a schematic diagram of the Euro-3 diesel engine electronic control and describes hard- and software platform of the high pressure fuel pump pneumatic actuator control that allows to realize the concept of electronic fuel supply control of diesel engine KamAZ-740. The strategic dependence beetwen the angular position of fuel pump governor lever and the angular position of electronic accelerator pedal were put on the basis of electronic control concept. Implementation of this dependence was carried out by applying a modulated PWM signal with determined duty cycle by the controller to the coil proportional solenoid valve, which is responsible for the amount of air pressure in the working chamber of the power air cylinder, connected by articulated-type to the governor lever of the high pressure fuel pump. In this case, the feedback control by position of governor lever of the high pressure fuel pump was introduced in the control circuit, but engine crankshaft speed control was carried out using a software continuous PID governor. Developed strategy gives possibility to track the deflection  of control parameter from a predetermined value by real-time and almost instantly, to make a control action on actuators to eliminate this deflection, while providing a minimum time of transition. Governor’s setting (proportional, integral and differential component performed empirically using the classical Ziegler – Nichols method, based on the analysis of the safety factor of automatic control system. The results of calculating the coefficients of proportional integral-differential regulator and oscillograms HIL experiment on testing the proposed diesel engine throttle control strategies using visualization CoDeSys V2.3 are given in activity.

  4. Comparison of quality assurance for performance and safety characteristics of the facility for Boron Neutron Capture therapy in Petten/NL with medical electron accelerators

    International Nuclear Information System (INIS)

    Rassow, Juergen; Stecher-Rasmussen, Finn; Voorbraak, Wim; Moss, Ray; Vroegindeweij, Corine; Hideghety, Katalin; Sauerwein, Wolfgang

    2001-01-01

    Background and purpose: The European Council Directive on health protection 97/43/EURATOM requires radiotherapy quality assurance programmes for performance and safety characteristics including acceptance and repeated tests. For Boron Neutron Capture therapy (BNCT) at the High Flux Reactor (HFR) in Petten/NL such a programme has been developed on the basis of IEC publications for medical electron accelerators. Results: The fundamental differences of clinical dosimetry for medical electron accelerators and BNCT are presented and the order of magnitude of dose components and their stability and that of the main other influencing parameter 10 B concentration for BNCT patient treatments. A comparison is given for requirements for accelerators and BNCT units indicating items which are not transferable, equal or additional. Preliminary results of in vivo measurements done with a set of 55 Mn, 63 Cu and 197 Au activation foils for all single fields for the four fractions at all 15 treated patients show with <±4% up to now a worse reproducibility than the used dose monitoring systems (±1.5%) caused by influence of hair position on the foil-skull distance. Conclusions: Despite the more complex clinical dosimetry (because of four relevant dose components, partly of different linear energy transfer (LET)) BNCT can be regulated following the principles of quality assurance procedures for therapy with medical electron accelerators. The reproducibility of applied neutron fluence (proportional to absorbed doses) and the main safety aspects are equal for all teletherapy methods including BNCT

  5. Regulatory risks associated with nuclear safety legislation after Fukushima Daiichi Nuclear Accident in Japan. Focus on legal structure of the nuclear reactor regulation act

    International Nuclear Information System (INIS)

    Tanabe, Tomoyuki; Maruyama, Masahiro

    2016-01-01

    Nuclear safety regulations enforced after Fukushima Daiichi Nuclear Accident under the Nuclear Reactor Regulation Act face the following regulatory problems that involve potential risk factors for nuclear businesses; 1) 'entity based regulation' unable to cope with business cessation or bankruptcy of the entity subject of regulation, 2) potential risk of the Nuclear Regulation Authority's inappropriate involvement in nuclear industry policy beyond their duty, and 3) compliance of backfits under vague regulations. In order to alleviate them, this report, through analyzing these regulatory problems from the view point of sound development of the nuclear industry, proposes the following regulatory reforms; (1) To clarify the rule for industry policy in nuclear regulations and enable the authority, Ministry of Economy, Trade and Industry, to choose most appropriate industrial policy measure. (2) Through establishing safety goals as measures to promote continuous improvement of nuclear safety regulations, to stimulate timely adjustments of the regulations, and to introduce a legal mechanism into the nuclear regulation systems under which validity of administrative law and its application can be checked. (author)

  6. Effect of static electronic advertising signs on road safety: an experimental case study.

    Science.gov (United States)

    Izadpanah, Pedram; Omrani, Reza; Koo, Sheldon; Hadayeghi, Ali

    2014-01-01

    As technology continues to advance, the outdoor advertising industry is taking advantage of electronic signs, some of which are static electronic signs (SES), with the ability to automatically change the message shown on the sign at regular intervals. Studies indicate that SES has a negative impact on the drivers' visual attention and on vehicle control. However, the actual effects of the SES on the number of collisions have been difficult to prove conclusively. The objective of this article is to generate a clear understanding of the safety impacts of SES on the number collisions by conducting a before-and-after analysis with comparison groups. The analysis was based on a total of 10 SES along the Highway 27 and the Gardiner Expressway of the city of Toronto. The results of the before-and-after study revealed that there was not enough evidence to suggest that these signs have any impact on road safety along the adjacent roadway sections at a 95% confidence interval. The same results were obtained by comparing collisions that occurred during daylight and artificial light.

  7. The impact of regulations, safety considerations and physical limitations on research progress at maximum biocontainment.

    Science.gov (United States)

    Shurtleff, Amy C; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S; Bavari, Sina

    2012-12-01

    We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

  8. The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

    Directory of Open Access Journals (Sweden)

    Jean Patterson

    2012-12-01

    Full Text Available We describe herein, limitations on research at biosafety level 4 (BSL-4 containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review.

  9. The Impact of Regulations, Safety Considerations and Physical Limitations on Research Progress at Maximum Biocontainment

    Science.gov (United States)

    Shurtleff, Amy C.; Garza, Nicole; Lackemeyer, Matthew; Carrion, Ricardo; Griffiths, Anthony; Patterson, Jean; Edwin, Samuel S.; Bavari, Sina

    2012-01-01

    We describe herein, limitations on research at biosafety level 4 (BSL-4) containment laboratories, with regard to biosecurity regulations, safety considerations, research space limitations, and physical constraints in executing experimental procedures. These limitations can severely impact the number of collaborations and size of research projects investigating microbial pathogens of biodefense concern. Acquisition, use, storage, and transfer of biological select agents and toxins (BSAT) are highly regulated due to their potential to pose a severe threat to public health and safety. All federal, state, city, and local regulations must be followed to obtain and maintain registration for the institution to conduct research involving BSAT. These include initial screening and continuous monitoring of personnel, controlled access to containment laboratories, accurate and current BSAT inventory records. Safety considerations are paramount in BSL-4 containment laboratories while considering the types of research tools, workflow and time required for conducting both in vivo and in vitro experiments in limited space. Required use of a positive-pressure encapsulating suit imposes tremendous physical limitations on the researcher. Successful mitigation of these constraints requires additional time, effort, good communication, and creative solutions. Test and evaluation of novel vaccines and therapeutics conducted under good laboratory practice (GLP) conditions for FDA approval are prioritized and frequently share the same physical space with important ongoing basic research studies. The possibilities and limitations of biomedical research involving microbial pathogens of biodefense concern in BSL-4 containment laboratories are explored in this review. PMID:23342380

  10. The role of the Gosatomnadzor of Russia in national regulating of safety of radiation sources and security of radioactive materials

    International Nuclear Information System (INIS)

    Mikhailov, M.V.; Sitnikov, S.A.

    2001-01-01

    As at the end of 1999, the Gosatomnadzor of Russia supervised 6551 radiation sources, including 1285 unsealed sources with individual activity from a minimal level to 1x10 12 Bq and a total activity of 585x10 12 Bq, and also 5266 sealed sources with individual activity from 30 to 1x10 17 Bq and the total activity of more than 11x10 17 Bq. A national infrastructure has been created in the Russian Federation in order to regulate the safety of nuclear energy use. The infrastructure includes the legal system and the regulatory authorities based on and acting according to it. The regulation of radiation safety, including assurance of radiation source safety and radioactive material security (management of disused sources, planning, preparedness and response to abnormal events and emergencies, recovery of control over orphan sources, informing users and others who might be affected by lost source, and education and training in the safety of radiation sources and the security of radioactive materials), is realized within this infrastructure. The legal system includes federal laws ('On the Use of Nuclear Energy' and 'On Public Radiation Safety'), a number of decrees and resolutions of the President and the Government of the Russian Federation, federal standards and rules for nuclear energy use, and also departmental and industrial manuals and rules, State standards, construction standards and rules and other documents. The safety regulation tasks have been defined by these laws, according to which regulatory authorities are entrusted with the development, approval and putting into force of standards and rules in the nuclear energy use, with issuing licenses for carrying out nuclear activities, with safety supervision assurance, with review and inspection implementation, with control over development and realization of protective measures for workers, population and environment in emergencies at nuclear and radiation hazardous facilities. Russian national regulatory

  11. Electron emission regulator for an x-ray tube filament

    International Nuclear Information System (INIS)

    Daniels, H.E.; Randall, H.G.

    1982-01-01

    An x-ray tube ma regulator has an scr phase shift voltage regulator supplying the primary winding of a transformer whose secondary is coupled to the x-ray tube filament. Prior to initiation of an x-ray exposure, the filament is preheated to a temperature corresponding substantially to the electron emissivity needed for obtaining the desired tube ma during an exposure. During the preexposure interval, the phase shift regulator is controlled by a signal corresponding to the sum of signals representative of the voltage applied to the filament transformer, the desired filament voltage and the space charge compensation needed for the selected x-ray tube anode to cathode voltage. When an exposure is initiated, control of the voltage regulator is switched to a circuit that responds to the tube current by controlling the amount of phase shift and, hence, the voltage supplied to the transformer. Transformer leakage current compensation is provided during the exposure interval with a circuit that includes an element whose impedance is varied in accordance with the anode-to-cathode voltage setting so the element drains off tube current as required to cancel the effect of leakage current variations

  12. Electronic cigarettes: a safer alternative or potential poison?

    Science.gov (United States)

    Smith, Janet E

    2014-10-01

    Electronic cigarettes have been marketed as a safer alternative to cigarettes, and their use is expanding exponentially. However, there is a severe lack of scientific data about the ingredients in the liquid used in the device and the health consequences of using electronic cigarettes. As technology has outpaced regulations, the production and sale of electronic cigarettes are, as yet, unregulated and do not fall under the purview of the Food and Drug Administration. This article will review the mechanism of action and what is currently known about the safety of electronic cigarettes. The risk of poisoning for children will also be identified, as well as the implications for home healthcare clinicians.

  13. Electronic distractions of the respiratory therapist and their impact on patient safety.

    Science.gov (United States)

    Papadakos, Peter J

    2014-08-01

    Over the last decade, data from the lay press, government agencies, and the business world have identified ever-growing problems with electronic distraction and changes in human relationships in this electronically interconnected planet. As health professionals, we are well aware of the epidemic growth of injuries and deaths related to texting and driving. It should not surprise us that this distracted behavior has affected all levels of health-care providers and has impacted patient care. This advent of “distracted doctoring” was first coined by the Pulitzer Prize-winning correspondent Matt Richtel in a landmark article in the New York Times, “As doctors use more devices, potential for distraction grows.” This article was a flashpoint for professional organizations to reflect on this change in behavior and how it will impact patient safety and how we relate to patients. The explosion in technology (both personnel and hospital-based), coupled with a rapid social shift, creates an environment that constantly tempts health-care workers to surf the internet, check social media outlets, or respond to e-mails. Studies and commentaries in the medical literature only support how this is a growing problem in patient safety and may both increase medical errors and affects costs and the way we relate to patients and fellow staff. The Emergency Care Research Institute (ECRI) released its annual list of technology hazards for 2013, and three ring true for United States caregivers: distractions from smartphones and mobile devices, alarm hazards, and patient/data mismatches in electronic medical records and other health IT systems, all being in the top 10. How do we begin to address these new technological threats to our patients? First and foremost, we accept that this problem exists. We begin by educating our students and staff that this electronic explosion affects our behavior through addiction and the environment within our hospital through the use of electronic

  14. For improvements of issues behind food safety regulations implemented following the Fukushima nuclear accident

    International Nuclear Information System (INIS)

    Hamada, Nobuyuki; Ogino, Haruyuki

    2011-01-01

    The great quake and a subsequent tsunami seriously damaged the Fukushima nuclear power plants on 11 March 2011, followed by radionuclide releases outside the crippled reactors. Regulatory limits stipulated as 'provisional regulation values' were set to minimize internal exposure via ingestion of contaminated food and drink. Tap water, raw milk, vegetables, seafood and tea exceeded the limit, and distribution and/or consumption of these stuffs were temporality restricted. It took 7 and 11 days to set the provisional regulation values and to order the first restriction after the declaration of nuclear emergency situations, respectively. All restrictions began within 25 days after the first excess in each item, but the commencement of restrictions was concomitant with the social dislocations. All restrictions for tap water were withdrawn within 51 days, but restrictions for food have yet to be lifted. Among all items, maximum levels were detected in leafy vegetables (54,100 Bq/kg of 131 I, 82,000 Bq/kg of 134 Cs and 137 Cs). Most provisional regulation values were adopted from the preexisting 'index values'. Index values were logically designed and practically convenient. However, food and radionuclides were not comprehensively covered, and the same value was given to emergency and existing exposure situations. Also, different provisional regulation values were set for infants and others. In this respect, we here propose the concept of the 'graded triphasic reference level system' to optimize food safety regulations in early, intermediate and late phases following the accident, where each example phase-specific reference level value is provided. This paper focuses on the logic and issues behind such food safety regulations. The food monitoring data of 24,685 samples and the enforced restrictions shall also be outlined predicated on the information available as of 12 June 2011. (author)

  15. Australian Experience in Implementing Transport Safety Regulations and Transport Security Recommendations

    International Nuclear Information System (INIS)

    Sarkar, S.

    2016-01-01

    Australian transport safety and security regulatory framework is governed by Commonwealth, State and Territory legislations. There are eleven competent authorities in Australia that includes three Commonwealth authorities, six states and two territory authorities. IAEA Regulations for Safe Transport of Radioactive Material (TS-R-1, 2005 edition) is applied through Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) Code of Practice for Transport of Radioactive Material 2008 by road, rail and waterways not covered by marine legislations. All states and territories apply this Transport Code through their regulatory system. For air transport, the Civil Aviation Act 1988 adopts the requirements of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air DOC 9284, which also adopts TS-R-1. The security of radioactive material in air transport is achieved via the Aviation Transport Security Act 2004. For sea transport Australian Marine Order 41 applies the requirements of IMDG (International Maritime Dangerous Goods) Code which also adopts TS-R-1. The security of radioactive material (nuclear material) is governed by two Commonwealth Agencies namely, ARPANSA and ASNO (Australian Safeguards and Non-proliferation Office) . ARPANSA regulates the security of radioactive sources through ARPANSA Code of Practice for the Security of Radioactive Sources 2007 which is based on the IAEA Draft Security Series. ASNO regulates security of nuclear material including U, Th and Pu through the Nuclear Non-Proliferation (Safeguards) Act, and the object of which is to give effect to certain obligations that Australia has as a party to the NPT, Australia’s safeguards agreement with the IAEA, and other bilateral safeguards agreements and certain obligations that Australia has as a party to the Convention for the Physical Protection of Nuclear Materials (CPPNM). This paper presents the effectiveness of regulatory approaches for safe and secure

  16. Science and regulation 50 years hand in hand in radiation safety work in Finland

    International Nuclear Information System (INIS)

    Laaksonen, Jukka; Mustonen, Raimo; Ikaheimonen, Tarja

    2008-01-01

    The first predecessor of the present Nuclear and Radiation Safety Authority of Finland (STUK) was founded in 1958 to regulate the use of radiation and to study artificial radiation in the environment. In those days radiation was used only in medical and industrial applications and there were also first indications that atmospheric nuclear tests might cause significant exposure to radiation, especially in the Northern Finland. Focusing activities of the new Institute of Radiation Physics, as STUK was called in those days, to these two activities laid foundation for the operations culture where regulators and scientists work together to achieve the optimum level of safety. Since those early days STUK has continued this operations model and developed it to include also other activities. Today STUK is the national regulatory body for both radiation protection and nuclear safety, but at the same time it is a research organisation and an expert body, supporting for instance the national emergency preparedness for nuclear and radiation accidents. This has brought great synergy benefits and given STUK an opportunity to use the limited national resources in the most effective way. This paper describes the main functions of STUK in its fifty years' operation and highlights the arguments favouring to keep regulatory and research activities as close to each other as possible. In today's world nuclear safety, radiation protection, and radiological preparedness and security issues are so closely connected with each other that organisations dealing with them should have comprehensive knowledge about all of them. (author)

  17. SAFETY ASSESSMENT AND LIABILITY REGULATIONS IN THE CONTEXT OF GENETICALLY MODIFIED FOOD IN THE BRICS COUNTRIES

    Directory of Open Access Journals (Sweden)

    Sh. K. Balashanmugam

    2018-01-01

    Full Text Available International trade of food products is expected to increase rapidly with the widespread introduction of genetically modified (GM food. There will be greater participation of developing countries based on investment as well as research and development. Investment in research and development and commercial production of GM crops is high in Asia, particularly in India and China, but also in Latin American countries, such as Brazil, and on the African continent, especially in South Africa. Despite the merits, the introduction of GM foods in the world market has continued to raise public concerns touching upon health, legal, social, ethical and environmental issues. Especially, the issue of contamination is considered asignificant threat at many stages of development of GM food. Transboundary aspects and certain aspects of the components of the food safety system such as safety assessment, liability and redress are still not completely addressed. The present study is the systematic review of the extent of the development of legislation and institutional mechanisms in relation to safety assessment and liability mechanisms for regulating the emerging GM foods in the developing countries of BRICS. Additionally, the comparison of the components of national food safety systems of Brazil, Russia, India, China and South Africa reveals differences in policy and regulation in relation to GM food.

  18. Barriers to Construction Health and Safety Self-regulation: A Scoping Case of Nigeria

    Directory of Open Access Journals (Sweden)

    Umeokafor Nnedinma

    2017-03-01

    Full Text Available This scoping study builds on the recent uncovering that in terms of health and safety (H&S, the Nigerian construction industry is self-regulated in various forms, not unregulated and that the size of company can further explain H&S self-regulation. Consequently, the barriers identified through literature review were assessed using questionnaires. Analysis of the data collected from construction practitioners in Nigeria shows that ‘economic factors’ mostly explains the barriers to construction H&S self-regulation. This is followed by the ‘ability to self-regulate’ and ‘lack of awareness’. Furthermore, the results show significant differences among small, medium and large construction contractors on seven factors of which include ‘normative case’ factors, ‘H&S is a duty’, ‘H&S is the right thing’ and ‘unfair H&S standards or legislation’. Although a scoping study, the study draws attention to the barriers to construction H&S self-regulation in Nigeria and demonstrates an alternative to state regulation of H&S.

  19. Photosynthetic control of electron transport and the regulation of gene expression

    NARCIS (Netherlands)

    Foyer, C.H.; Neukermans, J.; Queval, G.; Noctor, G.; Harbinson, J.

    2012-01-01

    The term ‘photosynthetic control’ describes the short- and long-term mechanisms that regulate reactions in the photosynthetic electron transport (PET) chain so that the rate of production of ATP and NADPH is coordinated with the rate of their utilization in metabolism. At low irradiances these

  20. Mines Safety Control (Radiation Protection) Regulations (Northern Territory) No. 30 of 25 September 1981

    International Nuclear Information System (INIS)

    1981-01-01

    These Regulations, pursuant to the Mines Safety Control Act, are intended to prevent or limit the radiation risk to persons involved in the mining or milling of radioactive ores. The duties and responsibilities imposed by the Regulations on owners, managers and employees of the mines are identical with those set forth in the 1980 Code of Practice on Radiation Protection in the Mining and Milling of Radioactive Ores which establishes radiation standards and exposure limits, requires health surveillance of employees and provides for the management of radioactive wastes. (NEA) [fr

  1. Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

    Science.gov (United States)

    Falk, A.; Hartl, S.; Sinner, F.

    2013-04-01

    As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R&D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R&D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

  2. Regulation in the face of uncertainty: the evidence on electronic nicotine delivery systems (e-cigarettes

    Directory of Open Access Journals (Sweden)

    Farsalinos KE

    2015-09-01

    scheme is needed, separate from tobacco or medicinal products regulation. Regulation should implement specific quality criteria for products, rules for the exclusion of chemicals of reasonable concern, and appropriate testing for possible contaminants. Additionally, manufacturing standards derived from the food industry should be implemented and adjusted for specific conditions related to e-cigs. Finding the appropriate balance between safety and acceptability of use by smokers will be important in achieving the maximum public health benefit. Labeling should be specified, with warnings about exposure to skin or through ingestion and discouragement of use by nonsmokers, related to the presence of nicotine. Finally, advertising and marketing should not be banned, but appropriately regulated in order to encourage use by the intended population while avoiding use by never-smokers. E-cigs should be appealing to smokers (but not to nonsmokers, while availability and pricing should be strong competitive advantages of e-cigs relative to tobacco cigarettes. Keywords: electronic cigarettes, nicotine, smoking, tobacco harm reduction, precautionary principle, regulation

  3. New Safety rules

    CERN Multimedia

    Safety Commission

    2008-01-01

    The revision of CERN Safety rules is in progress and the following new Safety rules have been issued on 15-04-2008: Safety Procedure SP-R1 Establishing, Updating and Publishing CERN Safety rules: http://cern.ch/safety-rules/SP-R1.htm; Safety Regulation SR-S Smoking at CERN: http://cern.ch/safety-rules/SR-S.htm; Safety Regulation SR-M Mechanical Equipment: http://cern.ch/safety-rules/SR-M.htm; General Safety Instruction GSI-M1 Standard Lifting Equipment: http://cern.ch/safety-rules/GSI-M1.htm; General Safety Instruction GSI-M2 Standard Pressure Equipment: http://cern.ch/safety-rules/GSI-M2.htm; General Safety Instruction GSI-M3 Special Mechanical Equipment: http://cern.ch/safety-rules/GSI-M3.htm. These documents apply to all persons under the Director General’s authority. All Safety rules are available at the web page: http://www.cern.ch/safety-rules The Safety Commission

  4. Electronic cigarette devices and oro-facial trauma (Literature review)

    Science.gov (United States)

    Ghazali, A. F.; Ismail, A. F.; Daud, A.

    2017-08-01

    Detrimental effects of cigarette smoking have been well described and recognized globally. With recent advancement of technology, electronic cigarette has been introduced and gained its popularity and became a global trend, especially among young adults. However, the safety of the electronic devices remains debatable. This paper aimed to compile and review the reported cases of oro-facial trauma related to the usage of electronic cigarette devices. A literature search was conducted using PubMed/Medline in December 2016. The search terms used were a combination of “oral trauma”, “dental trauma”, “oral injury” and “electronic cigarette”. The search included all abstract published from the inception of the database until December 2016. Abstract that was written in English, case report, letter to editors, clinical and human studies were included for analysis. All selected abstract were searched for full articles. A total of 8 articles were included for review. All of the articles were published in 2016 with mostly case reports. The sample size of the studies ranged from 1 to 15 patients. Seven of the included articles are from United States of America and one from Mexico. Our review concluded that the use of electronic cigarette devices posed not only a safety concern but also that the devices were mostly unregulated. There should be a recognized authority body to regulate the safety and standard of the electronic devices.

  5. Cerebrospinal fluid protein and glucose examinations and tuberculosis:
Will laboratory safety regulations force a change of practice?

    Science.gov (United States)

    Tormey, William P; O'Hagan, Christopher

    2015-01-01

    Cerebrospinal fluid (CSF) protein and glucose examinations are usually performed in chemical pathology departments on autoanalysers. Tuberculosis (TB) is a group 3 biological agent under Directive 2000/54/EC of the European Parliament but in the biochemistry laboratory, no extra precautions are taken in its analysis in possible TB cases. The issue of laboratory practice and safety in the biochemical analyses of CSF specimens, when tuberculosis infection is in question is addressed in the context of ambiguity in the implementation of current national and international health and safety regulations. Additional protective measures for laboratory staff during the analysis of CSF TB samples should force a change in current laboratory practice and become a regulatory issue under ISO 15189. Annual Mantoux skin test or an interferon-γ release assay for TB should be mandatory for relevant staff. This manuscript addresses the issue of biochemistry laboratory practice and safety in the biochemical analyses of CSF specimens when tuberculosis infection is in question in the context of the ambiguity of statutory health and safety regulations.

  6. Electronic isolators used in safety systems of US nuclear power plants

    International Nuclear Information System (INIS)

    Nielsen, J.R.

    1986-01-01

    An evaluation program has been conducted for electronic isolators used in safety systems of US nuclear power plants. As a result of the program, some recommendations are made for test methods that can be used to ensure that isolation devices are being qualified adequately to satisfy IEEE-279 requirements. These recommendations are based on studies made on National Standards; conversations held with utility personnel, Nuclear Steam System Suppliers, Architect Engineers, and the isolator vendor staff; and analysis of actual tests performed on sample isolators

  7. In Silico Analysis of the Regulation of the Photosynthetic Electron Transport Chain in C3 Plants.

    Science.gov (United States)

    Morales, Alejandro; Yin, Xinyou; Harbinson, Jeremy; Driever, Steven M; Molenaar, Jaap; Kramer, David M; Struik, Paul C

    2018-02-01

    We present a new simulation model of the reactions in the photosynthetic electron transport chain of C3 species. We show that including recent insights about the regulation of the thylakoid proton motive force, ATP/NADPH balancing mechanisms (cyclic and noncyclic alternative electron transport), and regulation of Rubisco activity leads to emergent behaviors that may affect the operation and regulation of photosynthesis under different dynamic environmental conditions. The model was parameterized with experimental results in the literature, with a focus on Arabidopsis ( Arabidopsis thaliana ). A dataset was constructed from multiple sources, including measurements of steady-state and dynamic gas exchange, chlorophyll fluorescence, and absorbance spectroscopy under different light intensities and CO 2 , to test predictions of the model under different experimental conditions. Simulations suggested that there are strong interactions between cyclic and noncyclic alternative electron transport and that an excess capacity for alternative electron transport is required to ensure adequate redox state and lumen pH. Furthermore, the model predicted that, under specific conditions, reduction of ferredoxin by plastoquinol is possible after a rapid increase in light intensity. Further analysis also revealed that the relationship between ATP synthesis and proton motive force was highly regulated by the concentrations of ATP, ADP, and inorganic phosphate, and this facilitated an increase in nonphotochemical quenching and proton motive force under conditions where metabolism was limiting, such as low CO 2 , high light intensity, or combined high CO 2 and high light intensity. The model may be used as an in silico platform for future research on the regulation of photosynthetic electron transport. © 2018 American Society of Plant Biologists. All Rights Reserved.

  8. Guide to Radiation Safety regulations and guidelines (SSMFS 2012:3) on the management of contaminated ash

    International Nuclear Information System (INIS)

    Moere, Hans

    2012-06-01

    Energy producers burning peat or wood fuel can obtain ash that is contaminated with cesium-137 from Tjernobyl accident or naturally occurring uranium, thorium and potassium, from some peat bogs. Regulations (SSMFS 2012:3) have been developed which regulates how the contaminated ash should be handled. The regulations affect all who handle contaminated ash in incinerators, landfills, public works, ash recycling, transportation or recycling of ash in other ways. Radiation Safety regulations and guidelines (SSMFS 2012:3) on the management of contaminated ash will apply from 1 September 2012. At that time Regulations (SSMFS 2008:16) on the management of ash that is contaminated with cesium-137, ceases to apply. The contents have been incorporated into the new regulations. This report provides explanations and guidance to the Regulations in order to facilitate the practical application. This guidance is not legally binding

  9. Health Considerations in Regulation and Taxation of Electronic Cigarettes.

    Science.gov (United States)

    Mainous, Arch G; Tanner, Rebecca J; Mainous, Ryan W; Talbert, Jeffery

    2015-01-01

    The use of electronic cigarettes (e-cigarettes) is experiencing unprecedented growth. This can be contrasted to the use of conventional cigarettes which showed a decrease among adults with the current smoker prevalence dropping from 20.9% in 2005 to 17.8% in 2013. There is some data that e-cigarettes are attracting both former smokers and never smokers, and in particular, young people as users. Currently most states do not tax e-cigarettes. Taxation and regulation may have a similar overall goal of decreasing smoking but regulation tends to focus reduced availability of products. In terms of tobacco control, taxation focuses on the demand side of the equation. Taxation is a distinct strategy from regulation and has been shown to decrease new adopters of conventional cigarettes. A variety of potential taxation strategies can be considered by policymakers based on different assumptions about e-cigarettes and their utility, ranging from untaxed to taxation at moderate levels compared to conventional cigarettes to taxation equal to conventional cigarettes. Until more evidence for the benefits of e-cigarettes is presented, it seems prudent to view them as a potentially harmful and addictive product that ought to be regulated and taxed in an equivalent manner to conventional cigarettes. © Copyright 2015 by the American Board of Family Medicine.

  10. After the Fukushima Daiichi Accident, Extending the Human and Organizational Factors (HOF) Framework to Safety Regulation

    International Nuclear Information System (INIS)

    Chanton, O.; Mangeon, M.; Jeffroy, F.

    2016-01-01

    The accident of Fukushima-Daichi is regarded as a product of multiple failures of the nuclear risks regulation system in Japan and more particularly as a failure of the regulatory system (authorities, regulator and operator) to take into account seismic risks and flood risks caused by tsunamis. This statement conducted the French institute for radiological protection and nuclear safety (IRSN) to develop a research program dedicated to the study of the way the French nuclear regulatory system developed and addresses flood risks. A regulatory system rests upon a number of institutional and organizational devices and upon normative tools, such as technical standards or guidelines. The aim of these normative tools is to guide NPP operators during both stages of risks identification and characterisation and of the design of protections against risks. These instruments have profound and multiple effects on the stakeholders involved. They affect the design of nuclear facilities, significantly influence the safety demonstration of a plant, but also the manner in which the actions implemented by the operator are evaluated and their reality controlled by the regulator.

  11. On safety management and nuclear safety - A frame of reference for studies of safety management with examples from non-nuclear contects of relevance for nuclear safety

    International Nuclear Information System (INIS)

    Svenson, O.; Allwin, P.; Salo, I.

    2004-03-01

    The report includes three case studies of safety management. The studies are presented as chapters, but are written in a format that makes them easy to read separately. Two of the studies cover regulators (the Swedish Civil Aviation Safety Authority, Luftfartsinspektionen) and the Norwegian Petroleum Directorate) and one a regulated activity/industry (a car manufacturer, Volvo Car). The introduction outlines a living system framework and relates this to concepts used in organizational management. The report concludes with some findings with potential relevance for safety management in the nuclear power domain. In the next phase of the work, the regulated counterparts of the regulators here will be investigated in addition to a fourth case study of a regulated activity/industry. (au)

  12. Resolution 12/2004 Guideline for implementation of safety regulations in the practice of industrial radiography

    International Nuclear Information System (INIS)

    2004-01-01

    1. This guide is intended to clarify, in relation to its application in practice Industrial Radiography, the provisions of: a) Joint Resolution CITMA-MINSAP, of December 15, 2002, Regulation: B asic Radiation Safety Standards , hereinafter Regulation NBS; b) Resolution No. 25/98 of CITMA Regulation. A uthorization Practices Associated with the use of ionizing radiation , hereinafter Resolution 25/98; c) Resolution 121/2000 CITMA Regulation: F or the Safe Transport of Radioactive materials , hereinafter Resolution 121/2000; and in d) Joint Resolution CITMA-MINSAP, Regulation: S election, Training and Authorization of personnel performing Employment Practices Associated Radiation Ionizing . 2. For the purposes of applying this Guide considers the practice of Industrial Radiography includes the following techniques: a) Industrial Radiography with use of gamma radiation sources; b) crawler radiography equipment; and c) Industrial Radiography with X-rays

  13. An electronic intervention to improve safety for pain patients co-prescribed chronic opioids and benzodiazepines.

    Science.gov (United States)

    Zaman, Tauheed; Rife, Tessa L; Batki, Steven L; Pennington, David L

    2018-03-29

    Co-prescribing opioids and benzodiazepines increases overdose risk. A paucity of literature exists evaluating strategies to improve safety of co-prescribing. This study evaluated an electronic intervention to improve safety for patients co-prescribed chronic opioids for pain and benzodiazepines at 3 and 6 months. A prospective cohort study was conducted from December 2015 through May 2016 at San Francisco Veterans Affairs Health Care System. A clinical dashboard identified 145 eligible patients prescribed chronic opioids and benzodiazepines. Individualized taper and safety recommendations were communicated to prescribers via electronic medical record progress note and encrypted e-mail at baseline. Primary outcome was number of patients co-prescribed chronic opioids and benzodiazepines. Secondary outcomes included daily dose of opioids and benzodiazepines and number prescribed ≥100 mg morphine equivalent daily dose. Safety outcomes included number with opioid overdose education and naloxone distribution, annual urine drug screening, annual prescription drug monitoring program review, and signed opioid informed consent. Linear mixed models and generalized estimating equations were used to examine within-group change in outcomes between baseline and 3 and 6 months. Among the 145 patients, mean (standard deviation) age was 62 (11) years and 91.7% (133/145) were male. Number co-prescribed significantly decreased from 145/145 (100%) at baseline to 93/139 (67%) at 6-month follow-up (odds ratio [OR] = 0.53, 95% confidence interval [CI]: 0.34-0.81, P = .003). Mean opioid and benzodiazepine doses significantly decreased from 84.61 to 65.63 mg (95% CI: 8.32-27.86, P improve safety for patients co-prescribed chronic opioids for pain and benzodiazepines.

  14. International regulations on labour health and safety applied to fishing and maritime transport sectors. Are maritime workers under-protected.

    Science.gov (United States)

    Rodríguez, Julio Louro; Portela, Rosa Mary de la Campa; Pardo, Guadalupe Martín

    2012-01-01

    The work activity developed on board is of great importance in our nearby environment, and it has a series of peculiarities that determine the service rendering of sea workers. On the other hand, work at sea is developed on an international basis. Nowadays such work becomes a completely globalised industrial sector in relation to the elements that make up the ship's operation, including manpower. For that reason several relevant international organisations have paid attention to this industrial sector and have adopted a broad regulation on this matter. In the case of the European Union, the Community procedure emphasises enormous interest in providing specific and comprehensive training to seafarers, as well as in regulating working time on board with the aim of minimising the safety problems caused by fatigue. In the present article a schematic presentation of regulations on workers' health and occupational safety protection derived from the European Union, the International Maritime Organisation, and the International Labour Organisation has been done. Also it shows what parts of these regulations are not applicable to the work on board, and it reveals how the workers of fishing and maritime transport sectors are under-protected with regard to the guarantee of their health and occupational safety compared to workers in other sectors.

  15. Safety Regulation Implemented by Gosatomnadzor of Russia

    International Nuclear Information System (INIS)

    Gutsalov, A.T.; Bukrinsky, A.M.

    2001-01-01

    The principles and approaches used by Gosatomnadzor of Russia in establishing safety goals are described. The link between safety goals and safety culture is demonstrated. Information on nuclear regulatory activities in Russia is also presented

  16. What Can We Learn about Workplace Heat Stress Management from a Safety Regulator Complaints Database?

    Science.gov (United States)

    Hansen, Alana; Pisaniello, Dino; Varghese, Blesson; Rowett, Shelley; Hanson-Easey, Scott; Bi, Peng; Nitschke, Monika

    2018-03-06

    Heat exposure can be a health hazard for many Australian workers in both outdoor and indoor situations. With many heat-related incidents left unreported, it is often difficult to determine the underlying causal factors. This study aims to provide insights into perceptions of potentially unsafe or uncomfortably hot working conditions that can affect occupational health and safety using information provided by the public and workers to the safety regulator in South Australia (SafeWork SA). Details of complaints regarding heat exposure to the regulator's "Help Centre" were assembled in a dataset and the textual data analysed thematically. The findings showed that the majority of calls relate to indoor work environments such as kitchens, factories, and warehouses. The main themes identified were work environment, health effects, and organisational issues. Impacts of hot working conditions ranged from discomfort to serious heat-related illnesses. Poor management practices and inflexibility of supervisors featured strongly amongst callers' concerns. With temperatures predicted to increase and energy prices escalating, this timely study, using naturalistic data, highlights accounts of hot working conditions that can compromise workers' health and safety and the need for suitable measures to prevent heat stress. These could include risk assessments to assess the likelihood of heat stress in workplaces where excessively hot conditions prevail.

  17. Regulation and safety implementation of nanotechnology for chemical enterprises in the Central Europe Space

    International Nuclear Information System (INIS)

    Falk, A; Hartl, S; Sinner, F

    2013-01-01

    As result of the gradually increasing nanotechnology sector there is the necessity of a contemporary analysis of the present regulations used for nanomaterials, to outline the current situation of the nanotechnology sector, to promote international cooperation and research's coordination to overcome disciplinary boundaries, to fill the gap between more and less experienced regions and to turn investments in R and D in industrial innovations. The general objective of the Central Europe project NANOFORCE, which is developed by national and regional chemistry associations and R and D Centres of the Central Europe area, is to foster the innovative nanotechnology-sector networks across Central Europe regions by bringing together public and private organizations to carry out collaborative and interdisciplinary researches on nanomaterials (in the frame of REACH Regulation) and to turn the most promising laboratory results into innovative industrial applications. To build up a legal advisory board for chemical enterprises starting in nanotechnology, a state of the art report on existing safety procedures and nanotech related regulations was produced to give an overview on currently available regulations used by chemical industries and manufacturing companies within the European region to secure their products. The main emphasis was placed on REACH regulation to search for relevant sections concentrating on nanomaterials which are applicable for nanotechnology. In addition, all relevant directives and amendments of REACH were screened with regard to identify gaps where action is still needed and give possible recommendations for the European Commission. Beyond literature research a questionnaire for producers, users, researchers and financiers was developed with the goal to collect information about the nanotechnology sector in the CE region concerning development, financial status, and international cooperation within joint ventures, safety and nanotoxicology.

  18. Regulation of occupational health and safety in the semiconductor industry: enforcement problems and solutions.

    Science.gov (United States)

    Watterson, Andrew

    2006-01-01

    Reports of high incidences of occupational illnesses in the semiconductor industry should have triggered global investigations and rigorous inspection of the industry. Yet semiconductor plants remain essentially unregulated. Health and safety standards are inadequate and enforcement is lax. Roles for stakeholders in laying down good practice, monitoring, and regulating are proposed, and obstacles are described. Effective regulation has advantages for the industry as well as workers. Conditions for best practice include education at all levels, protection and support for labor inspectors, government commitment to enforcing laws, recognition of the right of workers to organize, and recognition of their rights.

  19. Aspects of the state safety regulation dealing with management of radioactive wastes from nuclear vessels

    International Nuclear Information System (INIS)

    Markarov, Valentin G.

    1999-01-01

    According to this presentation, the Constitution of the Russian Federation states that nuclear power engineering and fissile materials are under the jurisdiction of the Russian Federation. But there is no federal law with detailed directions for radioactive waste (RW) management, which thus comes under the Federal law ''On Use of Atomic Energy''. This law defines the legal basis and principles of regulating the relations occurring during RW management and sets some general requirements. RW management safety is regulated by the federal norms and rules (1) Radiation Safety Norms (NRB-96), Basic Sanitary Rules (OSP-72, 87) and (3) Sanitary Rules for RW Management (SPORO-85), etc. A number of normative documents on RW management will be put in force in 1999. For work in the field of RW management, licence must in general be obtained from Gozatomnazdor of Russia. The conditions for receiving a license for the management of RW from vessels are presented

  20. The Swedish Nuclear Power Inspectorate's Regulations concerning Safety in connection with the Disposal of Nuclear Material and Nuclear Waste. General Recommendations concerning the Application of the Swedish Nuclear Power Inspectorate's Regulations above

    International Nuclear Information System (INIS)

    2002-06-01

    An english translation of the original Swedish regulations concerning the safety in disposal of nuclear wastes is published in this booklet, together with recommendations on how these regulations can be applied

  1. Implementation of ICRP-60, BBS-115 and the patient directives in radiation safety regulations of TAEK

    International Nuclear Information System (INIS)

    Okyar, H.B.; Vural, M.

    2001-01-01

    clearance procedures. The preamble to the Basic Safety Standards states that it is presumed in the Standards that Governments have an adequate national infrastructure in place in order to discharge their responsibilities for radiation protection and safety. In Turkey, the relevant national authority for regulating activities involving radioactive sources is the Turkish Atomic Energy Authority (TAEK). The structure of TAEK and its legislation will be introduced. Radiation Safety Regulation (Official Journal no.: 20983) which was issued in 6 September 1991 was revised and issued in 24 March 2000 (Official Journal no.: 23999). The revised version of the Radiation Safety Regulation based on BSS-115 and EC Directives includes definitions, exemptions, responsibilities, dose limits (significant decrease in the limits follows the recommendations of ICRP-60), redefinition of controlled and supervised areas, import and re-export procedures of radioactive materials, redefinition of licensing procedures, limitations in import radiation generators used in medicine, quality control, guidance levels of dose, dose rate and activity for medical exposures (including diagnostic radiological procedures, diagnostic procedures in nuclear medicine), dose levels in interventions and guidelines for intervention levels and action levels in emergency exposure situations. (author)

  2. Geometric phase and quantum interference in photosynthetic reaction center: Regulation of electron transfer

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yuming, E-mail: ymsun@ytu.edu.cn; Su, Yuehua; Dai, Zhenhong; Wang, WeiTian

    2016-10-20

    Photosynthesis is driven by electron transfer in reaction centers in which the functional unit is composed of several simple molecules C{sub 2}-symmetrically arranged into two branches. In view of quantum mechanism, both branches are possible pathways traversed by the transferred electron. Due to different evolution of spin state along two pathways in transmembrane electric potential (TEP), quantum state of the transferred electron at the bridged site acquires a geometric phase difference dependent on TEP, the most efficient electron transport takes place in a specific range of TEP beyond which electron transfer is dramatically suppressed. What’s more, reaction center acts like elaborately designed quantum device preparing polarized spin dependent on TEP for the transferred electron to regulate the reduction potential at bridged site. In brief, electron transfer generates the TEP, reversely, TEP modulates the efficiency of electron transfer. This may be an important approach to maintaining an appreciable pH environment in photosynthesis.

  3. 76 FR 80850 - Special Local Regulations and Safety Zones; Recurring Events in Northern New England

    Science.gov (United States)

    2011-12-27

    ..., design, or operation; test methods; sampling procedures; and related management systems practices) that... safety of life or property. (f) For all power boat races listed, vessels operating within the regulated... that will not interfere with the progress of the event. (g) For all regattas and boat parades listed...

  4. 77 FR 15323 - Special Local Regulations and Safety Zone; War of 1812 Bicentennial Commemorations, Chesapeake...

    Science.gov (United States)

    2012-03-15

    ... National Technology Transfer and Advancement Act (NTTAA) (15 U.S.C. 272 note) directs agencies to use...] RIN 1625-AA08, AA00 Special Local Regulations and Safety Zone; War of 1812 Bicentennial Commemorations... Chesapeake Bay and Port of Baltimore, Maryland for War of 1812 Bicentennial Commemorations activities. This...

  5. 33 CFR 165.1319 - Safety Zone Regulations, Seafair Blue Angels Air Show Performance, Seattle, WA.

    Science.gov (United States)

    2010-07-01

    ... Blue Angels Air Show Performance, Seattle, WA. 165.1319 Section 165.1319 Navigation and Navigable... Thirteenth Coast Guard District § 165.1319 Safety Zone Regulations, Seafair Blue Angels Air Show Performance... Peninsula; thence northerly along the shore of Mercer Island to the point of origin. [Datum: NAD 1983] (c...

  6. Adolescents' Attitudes towards E-cigarette Ingredients, Safety, Addictive Properties, Social Norms, and Regulation

    OpenAIRE

    Gorukanti, Anuradha; Delucchi, Kevin; Ling, Pamela; Fisher-Travis, Raymond; Halpern-Felsher, Bonnie

    2016-01-01

    E-cigarette use has dramatically increased. While studies have examined adolescents’ attitudes towards smoking, few have extended this research to adolescents’ attitudes towards e-cigarettes. The goal of this study was to examine adolescents' attitudes regarding e-cigarette ingredients, safety, addictive properties, social norms, accessibility, price, and regulation; and determine whether attitudes differ by past cigarette/e-cigarette use. Participants were 786 9th and 12th graders from Calif...

  7. The LHC personnel safety system

    International Nuclear Information System (INIS)

    Ninin, P.; Valentini, F.; Ladzinski, T.

    2011-01-01

    Large particle physics installations such as the CERN Large Hadron Collider require specific Personnel Safety Systems (PSS) to protect the personnel against the radiological and industrial hazards. In order to fulfill the French regulation in matter of nuclear installations, the principles of IEC 61508 and IEC 61513 standard are used as a methodology framework to evaluate the criticality of the installation, to design and to implement the PSS.The LHC PSS deals with the implementation of all physical barriers, access controls and interlock devices around the 27 km of underground tunnel, service zones and experimental caverns of the LHC. The system shall guarantee the absence of personnel in the LHC controlled areas during the machine operations and, on the other hand, ensure the automatic accelerator shutdown in case of any safety condition violation, such as an intrusion during beam circulation. The LHC PSS has been conceived as two separate and independent systems: the LHC Access Control System (LACS) and the LHC Access Safety System (LASS). The LACS, using off the shelf technologies, realizes all physical barriers and regulates all accesses to the underground areas by identifying users and checking their authorizations.The LASS has been designed according to the principles of the IEC 61508 and 61513 standards, starting from a risk analysis conducted on the LHC facility equipped with a standard access control system. It consists in a set of safety functions realized by a dedicated fail-safe and redundant hardware guaranteed to be of SIL3 class. The integration of various technologies combining electronics, sensors, video and operational procedures adopted to establish an efficient personnel safety system for the CERN LHC accelerator is presented in this paper. (authors)

  8. Review of the regulation and safety assessment of food substances in various countries and jurisdictions

    Science.gov (United States)

    Magnuson, Bernadene; Munro, Ian; Abbot, Peter; Baldwin, Nigel; Lopez-Garcia, Rebeca; Ly, Karen; McGirr, Larry; Roberts, Ashley; Socolovsky, Susan

    2013-01-01

    This review compares the regulations, definitions and approval processes for substances intentionally added to or unintentionally present in human food in the following specific countries/jurisdictions: Argentina, Australia, Brazil, Canada, China, the European Union, Japan, Mexico, New Zealand, and the United States. This includes direct food additives, food ingredients, flavouring agents, food enzymes and/or processing aids, food contact materials, novel foods, and nanoscale materials for food applications. The regulatory authority of each target jurisdiction/country uses its own regulatory framework and although the definitions, regulations and approval processes may vary among all target countries, in general there are many similarities. In all cases, the main purpose of each authority is to establish a regulatory framework and maintain/enforce regulations to ensure that food consumed and sold within its respective countries is safe. There is a move towards harmonisation of food regulations, as illustrated by Australia and New Zealand and by Mercosur. The European Union has also established regulations, which are applicable for all member states, to establish a common authorisation procedure for direct food additives, flavourings and enzymes. Although the path for approval of different categories of food additives varies from jurisdiction to jurisdiction, there are many commonalities in terms of the data requirements and considerations for assessment of the safety of use of food additives, including the use of positive lists of approved substances, pre-market approval, and a separation between science and policy decisions. The principles applied are largely reflective of the early work by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) committees and JECFA assessments of the safety of food additives for human and animal foods. PMID:23781843

  9. Electronic health records and patient safety: co-occurrence of early EHR implementation with patient safety practices in primary care settings.

    Science.gov (United States)

    Tanner, C; Gans, D; White, J; Nath, R; Pohl, J

    2015-01-01

    The role of electronic health records (EHR) in enhancing patient safety, while substantiated in many studies, is still debated. This paper examines early EHR adopters in primary care to understand the extent to which EHR implementation is associated with the workflows, policies and practices that promote patient safety, as compared to practices with paper records. Early adoption is defined as those who were using EHR prior to implementation of the Meaningful Use program. We utilized the Physician Practice Patient Safety Assessment (PPPSA) to compare primary care practices with fully implemented EHR to those utilizing paper records. The PPPSA measures the extent of adoption of patient safety practices in the domains: medication management, handoffs and transition, personnel qualifications and competencies, practice management and culture, and patient communication. Data from 209 primary care practices responding between 2006-2010 were included in the analysis: 117 practices used paper medical records and 92 used an EHR. Results showed that, within all domains, EHR settings showed significantly higher rates of having workflows, policies and practices that promote patient safety than paper record settings. While these results were expected in the area of medication management, EHR use was also associated with adoption of patient safety practices in areas in which the researchers had no a priori expectations of association. Sociotechnical models of EHR use point to complex interactions between technology and other aspects of the environment related to human resources, workflow, policy, culture, among others. This study identifies that among primary care practices in the national PPPSA database, having an EHR was strongly empirically associated with the workflow, policy, communication and cultural practices recommended for safe patient care in ambulatory settings.

  10. Cryogenic Safety Rules and Guidelines at CERN

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    CERN defines and implements a Safety Policy that sets out the general principles governing safety at CERN. As an intergovernmental organisation, CERN further establishes its own Safety Rules as necessary for its proper functioning. In this process, it takes into account the laws and regulation of the Host States (France and Switzerland), EU regulations and directives, as well as international regulations, standards and directives. For the safety of cryogenic equipment, this is primarily covered by the Safety Regulation for Mechanical Equipment and the General Safety Instruction for Cryogenic Equipment. In addition, CERN has also developed Safety Guidelines to support the implementation of these safety rules, covering cryogenic equipment and oxygen deficiency hazard assessment and mitigation. An overview of the cryogenic safety rules and these safety guidelines will be presented.

  11. Safety Evaluation of the Grape Marc Spirit by GC-FID Analysis

    Directory of Open Access Journals (Sweden)

    Teodora Coldea

    2013-11-01

    Full Text Available There were investigated grape marc spirits regarding their safety on consumers. Major volatile compounds which present risk to human health (such as methanol, furfural, and acetaldehyde and ethyl alcohol content were compared to European Union Regulation and other values found in previous studies.  The aim of our study was to evaluate the safety of grape marc spirits considering their content in major volatile compounds by comparison with the requirements of European Union Regulation. We investigated the ethyl alcohol content by electronic densimetry and 10 major volatile compounds (acetaldehyde, ethyl acetate, methanol, 1-propanol, 1-butanol, 2-butanol, isobutyl alcohol, isoamyl alcohol, amyl active alcohol and furfural by Gas Chromatography coupled with Flame Ionization Detector. We used reference chemicals to identify these compounds and 3-pentanol as internal standard to quantify the volatiles. Results were compared with the requirements of European Union Regulation. All major volatile compounds registered values in accordance to EU Regulation and the grape pomace spirits samples do not present any kind of risk for consumption.

  12. Guide for preparing annual reports on radiation-safety testing of electronic products (general)

    International Nuclear Information System (INIS)

    1987-10-01

    For manufacturers of electronic products other than those for which a specific guide has been issued, the guide replaces the Guide for the Filing of Annual Reports (21 CFR Subchapter J, Section 1002.11), HHS Publication FDA 82-8127. The electronic product (general) annual reporting guide is applicable to the following products: products intended to produce x radiation (accelerators, analytical devices, therapy x-ray machines); microwave diathermy machines; cold-cathode discharge tubes; and vacuum switches and tubes operating at or above 15,000 volts. To carry out its responsibilities under Public Law 90-602, the Food and Drug Administration's Center for Devices and Radiological Health (CDRH) has issued a series of regulations contained in Title 21 of the Code of Federal Regulations (CFR). Part 1002 of 21 CFR deals with records and reports. Section 1002.61 categorizes electronic products into Groups A through C. Section 1002.30 requires manufacturers of products in Groups B and C to establish and maintain certain records, while Section 1002.11 requires such manufacturers to submit an Annual Report summarizing the contents of the required records. Section 1002.7 requires that reports conform to reporting guides issued by CDRH unless an acceptable justification for an alternate format is provided

  13. In Silico Analysis of the Regulation of the Photosynthetic Electron Transport Chain in C3 Plants1[OPEN

    Science.gov (United States)

    Kramer, David M.

    2018-01-01

    We present a new simulation model of the reactions in the photosynthetic electron transport chain of C3 species. We show that including recent insights about the regulation of the thylakoid proton motive force, ATP/NADPH balancing mechanisms (cyclic and noncyclic alternative electron transport), and regulation of Rubisco activity leads to emergent behaviors that may affect the operation and regulation of photosynthesis under different dynamic environmental conditions. The model was parameterized with experimental results in the literature, with a focus on Arabidopsis (Arabidopsis thaliana). A dataset was constructed from multiple sources, including measurements of steady-state and dynamic gas exchange, chlorophyll fluorescence, and absorbance spectroscopy under different light intensities and CO2, to test predictions of the model under different experimental conditions. Simulations suggested that there are strong interactions between cyclic and noncyclic alternative electron transport and that an excess capacity for alternative electron transport is required to ensure adequate redox state and lumen pH. Furthermore, the model predicted that, under specific conditions, reduction of ferredoxin by plastoquinol is possible after a rapid increase in light intensity. Further analysis also revealed that the relationship between ATP synthesis and proton motive force was highly regulated by the concentrations of ATP, ADP, and inorganic phosphate, and this facilitated an increase in nonphotochemical quenching and proton motive force under conditions where metabolism was limiting, such as low CO2, high light intensity, or combined high CO2 and high light intensity. The model may be used as an in silico platform for future research on the regulation of photosynthetic electron transport. PMID:28924017

  14. The role of electronic healthcare record databases in paediatric drug safety surveillance: A retrospective cohort study

    NARCIS (Netherlands)

    S. de Bie (Sandra); P.M. Coloma (Preciosa); C. Ferrajolo (Carmen); K.M.C. Verhamme (Katia); G. Trifirò (Gianluca); M.J. Schuemie (Martijn); S.M.J.M. Straus (Sabine); R. Gini (Rosa); R.M.C. Herings (Ron); G. Mazzaglia (Giampiero); G. Picelli (Gino); A. Ghirardi (Arianna); L. Pedersen (Lars); B.H.Ch. Stricker (Bruno); J. van der Lei (Johan); M.C.J.M. Sturkenboom (Miriam)

    2015-01-01

    textabstractAim Electronic healthcare record (EHR)-based surveillance systems are increasingly being developed to support early detection of safety signals. It is unknown what the power of such a system is for surveillance among children and adolescents. In this paper we provide estimates of the

  15. International cooperation for the development of consistent and stable transportation regulations to promote and enhance safety and security

    International Nuclear Information System (INIS)

    Strosnider, J.

    2004-01-01

    International commerce of radioactive materials crosses national boundaries, linking separate regulatory institutions with a common purpose and making it necessary for these institutions to work together in order to achieve common safety goals in a manner that does not place an undue burden on industry and commerce. Widespread and increasing use of radioactive materials across the world has led to increases in the transport of radioactive materials. The demand for consistency in the oversight of international transport has also increased to prevent unnecessary delays and costs associated with incongruent or redundant regulatory requirements by the various countries through which radioactive material is transported. The International Atomic Energy Agency (IAEA) is the authority for international regulation of transportation of radioactive materials responsible for promulgation of regulations and guidance for the establishment of acceptable methods of transportation for the international community. As such, the IAEA is seen as the focal point for consensus building between its Member States to develop consistency in transportation regulations and reviews and to ensure the safe and secure transport of radioactive material. International cooperation is also needed to ensure stability in our regulatory processes. Changes to transportation regulations should be based on an anticipated safety benefit supported by risk information and insights gained from continuing experience, evaluation, and research studies. If we keep safety as the principle basis for regulatory changes, regulatory stability will be enhanced. Finally, as we endeavour to maintain consistency and stability in our international regulations, we must be mindful of the new security challenges that lay before the international community as a result of a changing terrorist environment. Terrorism is a problem of global concern that also requires international cooperation and support, as we look for ways to

  16. Safety of research reactors - A regulator's perspective

    International Nuclear Information System (INIS)

    Rahman, M.S.

    2001-01-01

    Due to historical reasons research reactors have received less regulatory attention in the world than nuclear power plants. This has given rise to several safety issues which, if not addressed immediately, may result in an undesirable situation. However, in Pakistan, research reactors and power reactors have received due attention from the regulatory authority. The Pakistan Research Reactor-1 has been under regulatory surveillance since 1965, the year of its commissioning. The second reactor has also undergone all the safety reviews and checks mandated by the licensing procedures. A brief description of the regulatory framework, the several safety reviews carried out have been briefly described in this paper. Significant activities of the regulatory authority have also been described in verifying the safety of research reactors in Pakistan along with the future activities. The views of the Pakistani regulatory authority on the specific issues identified by the IAEA have been presented along with specific recommendations to the IAEA. We are of the opinion that there are more Member States operating nuclear research reactors than nuclear power plants. Therefore, there should be more emphasis on the research reactor safety, which somehow has not been the case. In several recommendations made to the IAEA on the specific safety issues the emphasis has been, in general, to have a similar documentation and approach for maintaining and verifying operational safety at research reactors as is currently available for nuclear power reactors and may be planned for nuclear fuel cycle facilities. (author)

  17. In silico analysis of the regulation of the photosynthetic electron transport chain in C3 plants

    NARCIS (Netherlands)

    Morales Sierra, A.; Yin, Xinyou; Harbinson, Jeremy; Driever, Steven Michiel; Molenaar, Jaap; Kramer, David M.; Struik, Paul

    2018-01-01

    We present a new simulation model of the reactions in the photosynthetic electron transport chain of C3 species. We show that including recent insights about the regulation of the thylakoid proton motive force, ATP/NADPH balancing mechanisms (cyclic and non-cyclic alternative electron transport),

  18. Developing a patient-led electronic feedback system for quality and safety within Renal PatientView.

    Science.gov (United States)

    Giles, Sally J; Reynolds, Caroline; Heyhoe, Jane; Armitage, Gerry

    2017-03-01

    It is increasingly acknowledged that patients can provide direct feedback about the quality and safety of their care through patient reporting systems. The aim of this study was to explore the feasibility of patients, healthcare professionals and researchers working in partnership to develop a patient-led quality and safety feedback system within an existing electronic health record (EHR), known as Renal PatientView (RPV). Phase 1 (inception) involved focus groups (n = 9) and phase 2 (requirements) involved cognitive walkthroughs (n = 34) and 1:1 qualitative interviews (n = 34) with patients and healthcare professionals. A Joint Services Expert Panel (JSP) was convened to review the findings from phase 1 and agree the core principles and components of the system prototype. Phase 1 data were analysed using a thematic approach. Data from phase 1 were used to inform the design of the initial system prototype. Phase 2 data were analysed using the components of heuristic evaluation, resulting in a list of core principles and components for the final system prototype. Phase 1 identified four main barriers and facilitators to patients feeding back on quality and safety concerns. In phase 2, the JSP agreed that the system should be based on seven core principles and components. Stakeholders were able to work together to identify core principles and components for an electronic patient quality and safety feedback system in renal services. Tensions arose due to competing priorities, particularly around anonymity and feedback. Careful consideration should be given to the feasibility of integrating a novel element with differing priorities into an established system with existing functions and objectives. © 2016 European Dialysis and Transplant Nurses Association/European Renal Care Association.

  19. Safety culture

    International Nuclear Information System (INIS)

    Keen, L.J.

    2003-01-01

    Safety culture has become a topic of increasing interest for industry and regulators as issues are raised on safety problems around the world. The keys to safety culture are organizational effectiveness, effective communications, organizational learning, and a culture that encourages the identification and resolution of safety issues. The necessity of a strong safety culture places an onus on all of us to continually question whether the safety measures already in place are sufficient, and are being applied. (author)

  20. Safety in the design and use of gamma and electron irradiation facilities. 2. ed.

    International Nuclear Information System (INIS)

    1998-01-01

    Radioisotopes which emit gamma radiation and high-energy electron beam generators have been used in industry, medicine and research for many years in the UK and throughout the world. Their main application has been in medical product sterilisation, various food treatments, plastics curing and polymerisation, semiconductor manufacture and gemstone irradiation to bring about colour changes. The radiation safety of these applications is the subject of this guidance

  1. The Regulation of the Security of Electronic Information in Lithuania and Russia: the Comparative Aspects

    Directory of Open Access Journals (Sweden)

    Darius Štitilis

    2013-02-01

    Full Text Available Cybercrime has become a global phenomenon, which is causing more harm to individual citizens, organizations, society and the state. Most countries in the world compare cybercrime with such offences as terrorism and drug trafficking due to its risks and profitability. Therefore, the legal regulation of cybercrime is one of the most relevant problems in the world, including Lithuania and our neighbouring country, Russia. So far cybercrime analysis in scientific literature has been rather limited. We have not succeeded in finding a comparison between the regulatory practices of cybercrime in the Russian Federation and the Republic of Lithuania in any of the references. The main goal of the thesis paper is to analyse and to compare the electronic information security legal framework of the Russian Federation and the Republic of Lithuania. The article consists of two parts. The first part deals with the comparative aspect of strategic documents—the program governing electronic information protection in Lithuania and the Russian Federation. The second part of the article examines the comparative aspect of electronic information protection legislative, legal framework Republic of Lithuania and the Russian Federation. It was found that at the moment in both countries there is a strategic document which defines the planned state policy in this area, but the lack of a Lithuanian Law which can fully and consistently regulate social relations in relation to electronic information security. Several different approaches have been used in the research. The authors have used a comparative method to investigate the Lithuanian and Russian legal framework for the security of electronic information. Empirical analysis of legal documents was used to determine the legal regulation of the security of electronic information in Lithuania and Russia. Legal acts of the Republic of Lithuania and the Russian Federation have been analysed. Having analysed the official

  2. The Regulation of the Security of Electronic Information in Lithuania and Russia: the Comparative Aspects

    Directory of Open Access Journals (Sweden)

    Darius Štitilis

    2012-12-01

    Full Text Available Cybercrime has become a global phenomenon, which is causing more harm to individual citizens, organizations, society and the state. Most countries in the world compare cybercrime with such offences as terrorism and drug trafficking due to its risks and profitability. Therefore, the legal regulation of cybercrime is one of the most relevant problems in the world, including Lithuania and our neighbouring country, Russia. So far cybercrime analysis in scientific literature has been rather limited. We have not succeeded in finding a comparison between the regulatory practices of cybercrime in the Russian Federation and the Republic of Lithuania in any of the references.The main goal of the thesis paper is to analyse and to compare the electronic information security legal framework of the Russian Federation and the Republic of Lithuania.The article consists of two parts. The first part deals with the comparative aspect of strategic documents—the program governing electronic information protection in Lithuania and the Russian Federation.The second part of the article examines the comparative aspect of electronic information protection legislative, legal framework Republic of Lithuania and the Russian Federation. It was found that at the moment in both countries there is a strategic document which defines the planned state policy in this area, but the lack of a Lithuanian Law which can fully and consistently regulate social relations in relation to electronic information security.Several different approaches have been used in the research. The authors have used a comparative method to investigate the Lithuanian and Russian legal framework for the security of electronic information. Empirical analysis of legal documents was used to determine the legal regulation of the security of electronic information in Lithuania and Russia. Legal acts of the Republic of Lithuania and the Russian Federation have been analysed. Having analysed the official

  3. Using Simulations to Improve Electronic Health Record Use, Clinician Training and Patient Safety: Recommendations From A Consensus Conference.

    Science.gov (United States)

    Mohan, Vishnu; Woodcock, Deborah; McGrath, Karess; Scholl, Gretchen; Pranaat, Robert; Doberne, Julie W; Chase, Dian A; Gold, Jeffrey A; Ash, Joan S

    2016-01-01

    A group of informatics experts in simulation, biomedical informatics, patient safety, medical education, and human factors gathered at Corbett, Oregon on April 30 and May 1, 2015. Their objective: to create a consensus statement on best practices for the use of electronic health record (EHR) simulations in education and training, to improve patient safety, and to outline a strategy for future EHR simulation work. A qualitative approach was utilized to analyze data from the conference and generate recommendations in five major categories: (1) Safety, (2) Education and Training, (3) People and Organizations, (4) Usability and Design, and (5) Sociotechnical Aspects.

  4. Radiation Safety Act 1975 - No 44 of 1975

    International Nuclear Information System (INIS)

    1975-01-01

    This Act regulates the use of radioactive substances and irradiating apparatus, including particle accelerators as well as certain specified electronic products. The Act lays down a licensing and registration system for such substances and apparatus; it sets up a Radiological Council to administer the Act and to advise the Minister responsible for public health on matters of radiation safety. The radioactive Substances Act 1954 and the Amending Acts of 1960 and 1964 are repealed. (NEA) [fr

  5. 78 FR 42012 - Safety Zone and Regulated Navigation Area; Chicago Sanitary and Ship Canal, Romeoville, IL

    Science.gov (United States)

    2013-07-15

    ... is issuing this Interim Rule to address two omissions from the regulatory text of the Safety zone and... boats, etc.). This revision is intended to make the regulatory text consistent with the discussion of... of Homeland Security IR Interim Rule NPRM Notice of Proposed Rulemaking RNA Regulated Navigation Area...

  6. CERN's new safety policy

    CERN Multimedia

    2014-01-01

    The documents below, published on 29 September 2014 on the HSE website, together replace the document SAPOCO 42 as well as Safety Codes A1, A5, A9, A10, which are no longer in force. As from the publication date of these documents any reference made to the document SAPOCO 42 or to Safety Codes A1, A5, A9 and A10 in contractual documents or CERN rules and regulations shall be deemed to constitute a reference to the corresponding provisions of the documents listed below.   "The CERN Safety Policy" "Safety Regulation SR-SO - Responsibilities and organisational structure in matters of Safety at CERN" "General Safety Instruction GSI-SO-1 - Departmental Safety Officer (DSO)" "General Safety Instruction GSI-SO-2 - Territorial Safety Officer (TSO)" "General Safety Instruction GSI-SO-3 - Safety Linkperson (SLP)" "General Safety Instruction GSI-SO-4 - Large Experiment Group Leader In Matters of Safety (LEXGLI...

  7. 49 CFR 385.107 - The safety audit.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false The safety audit. 385.107 Section 385.107 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES Safety Monitoring System for Mexico-Domicile...

  8. Safety first. Status reports on the IAEA's safety standards

    International Nuclear Information System (INIS)

    Webb, G.; Karbassioun, A.; Linsley, G.; Rawl, R.

    1998-01-01

    Documents in the IAEA's Safety Standards Series known as RASS (Radiation Safety Standards) are produced to develop an internally consistent set of regulatory-style publications that reflects an international consensus on the principles of radiation protection and safety and their application through regulation. In this article are briefly presented the Agency's programmes on Nuclear Safety Standards (NUSS), Radioactive Waste Safety Standards (RADWASS), and Safe Transport of Radioactive Materials

  9. Presenting information on regulation values improves the public’s sense of safety: Perceived mercury risk in fish and shellfish and its effects on consumption intention

    Science.gov (United States)

    Suzuki, Mai; Yamaguchi, Tomiko

    2017-01-01

    Risk communication aims to promote health and understanding through information exchange; however, explanations regarding the basis of regulation values for the public are insufficient. Moreover, it is unclear how information presentation affects the public’s sense of safety and their consumption intentions. We first investigated the relationship between perception of mercury-risk in fish and shellfish and individual attributes and knowledge. We then examined how presenting information on regulation values and primary factors regarding perception affected sense of safety toward regulations and food-consumption intentions. An online survey was conducted with Japanese individuals (N = 1148). Respondents were randomly assigned to one of three groups based on the presentation level of regulation values. People who frequently consumed tuna had a high perception of dread risk of mercury. This suggests that the dread risk perception of mercury does not determine tuna-type consumption behavior; rather, individuals’ consumption behavior determines dread risk perception of mercury. Among those with high tuna-type consumption, those receiving information that a safety factor of 10 times had been considered showed a significantly greater sense of safety than did the group that was not presented with information on regulation values (odds ratio (95% confidence interval): 2.04 (1.18–3.53), p values showed a weak but significantly positive correlation with excessive intake of tuna-type fish (odds ratio: 2.95 (0.93–9.32), p values increases sense of safety; however, it may also lead to excessive intake. PMID:29267301

  10. Implementation of the chemicals regulation REACH : Exploring the impact on occupational health and safety management among Swedish downstream users

    OpenAIRE

    Schenk, Linda; Antonsson, Ann-Beth

    2015-01-01

    In the present study we have examined how the European chemicals regulation Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) has influenced occupational risk management of chemicals at Swedish downstream user companies. The data were collected through interviews with occupational health and safety professionals, safety representatives and authority employees. The results show that most of the informants had scarce knowledge about REACH and that REACH implementation...

  11. Safety: Preventive Medicine.

    Science.gov (United States)

    Kotula, John R.; Digenakis, Anthony

    1985-01-01

    Underscores the need for community colleges to practice safety within the institutions and to instruct students in workplace safety procedures and requirements. Reviews Occupational Safety and Health Act (OSHA) regulations and their impact on industry and education. Looks at the legal responsibilities of colleges for safety. (DMM)

  12. The SAFER guides: empowering organizations to improve the safety and effectiveness of electronic health records.

    Science.gov (United States)

    Sittig, Dean F; Ash, Joan S; Singh, Hardeep

    2014-05-01

    Electronic health records (EHRs) have potential to improve quality and safety of healthcare. However, EHR users have experienced safety concerns from EHR design and usability features that are not optimally adapted for the complex work flow of real-world practice. Few strategies exist to address unintended consequences from implementation of EHRs and other health information technologies. We propose that organizations equipped with EHRs should consider the strategy of "proactive risk assessment" of their EHR-enabled healthcare system to identify and address EHR-related safety concerns. In this paper, we describe the conceptual underpinning of an EHR-related self-assessment strategy to provide institutions a foundation upon which they could build their safety efforts. With support from the Office of the National Coordinator for Health Information Technology (ONC), we used a rigorous, iterative process to develop a set of 9 self-assessment tools to optimize the safety and safe use of EHRs. These tools, referred to as the Safety Assurance Factors for EHR Resilience (SAFER) guides, could be used to self-assess safety and effectiveness of EHR implementations, identify specific areas of vulnerability, and create solutions and culture change to mitigate risks. A variety of audiences could conduct these assessments, including frontline clinicians or care teams in different practices, or clinical, quality, or administrative leaders within larger institutions. The guides use a multifaceted systems-based approach to assess risk and empower organizations to work with internal or external stakeholders (eg, EHR developers) on optimizing EHR functionality and using EHRs to drive improvements in the quality and safety of healthcare.

  13. What to consider when regulating electronic cigarettes: Pros, cons and unintended consequences.

    Science.gov (United States)

    Caponnetto, Pasquale; Saitta, Daniela; Sweanor, David; Polosa, Riccardo

    2015-06-01

    Many public health experts, medical research societies, large health organizations and policy makers have expressed concerns about the increased popularity of electronic cigarettes and have pushed for more restrictive measures ranging from complete bans to tight regulations of these products either as medicines or as tobacco products. But these concerns have never been adequately qualified nor quantified. Without judicious assessment and thorough evaluation, regulations may have unintended consequences that can do more damage than good in public health terms. In this article, we will appraise the existing prominent regulatory frameworks for e-cigarettes, namely, general consumer product, medicinal product and tobacco product regulation, to highlight their pros and cons. Moreover, we provide concrete examples of the unintended consequences which may arise from inappropriate regulatory action. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. A study of influences of the workers' compensation and injury management regulations on aviation safety at a workplace.

    Science.gov (United States)

    Yadav, Devinder K; Nikraz, Hamid; Chen, Yongqing

    2016-01-01

    As the aviation industries developed, so too did the recognition that there must be an effective regulatory framework to address issues related to the workers' compensation and rehabilitation. All employees would like to work and return home safely from their workplace. Therefore, the efficient management of workplace injury and disease reduces the cost of aviation operations and improves flight safety. Workers' compensation and injury management laws regulate a majority of rehabilitation and compensation issues, but achieving an injury-free workplace remains a major challenge for the regulators. This paper examines the clauses of the workers' compensation and injury management laws of Western Australia related to workplace safety, compensation, and rehabilitations of the injured workers. It also discusses various provisions of common law under the relevant workers' health injury management legislations.

  15. Safety Learning, Organizational Contradictions and the Dynamics of Safety Practice

    Science.gov (United States)

    Ripamonti, Silvio Carlo; Scaratti, Giuseppe

    2015-01-01

    Purpose: The purpose of this paper is to explore the enactment of safety routines in a transshipment port. Research on work safety and reliability has largely neglected the role of the workers' knowledge in practice in the enactment of organisational safety. The workers' lack of compliance with safety regulations represents an enduring problem…

  16. Use of electron beam irradiation to improve the microbiological safety of Hippophae rhamnoides

    Energy Technology Data Exchange (ETDEWEB)

    Minea, R. [National Institute for Lasers, Plasma and Radiation Physics, Electron Accelerators Department, 409 Atomistilor St., Bucharest-Magurele 077125 (Romania); Nemtanu, M.R. [National Institute for Lasers, Plasma and Radiation Physics, Electron Accelerators Department, 409 Atomistilor St., Bucharest-Magurele 077125 (Romania)], E-mail: monica.nemtanu@inflpr.ro; Manea, S.; Mazilu, E. [S.C. Hofigal Export-Import S.A., 2A Intrarea Serelor St., 75669, Bucharest 4 (Romania)

    2007-09-21

    Sea buckthorn (Hippophae rhamnoides) is increasingly used in food supplements due to its dietary and medicinal compounds with a beneficial role in human diet and health. As many other medicinal plants, sea buckthorn can be contaminated with microorganisms which exerts an important impact on the overall quality of the products. Irradiation is an effective method for food preservation because it is able to destroy pathogenic microorganisms keeping the organoleptic and nutritional characteristics of the foods. The objective of the present study was to investigate the application of electron beam irradiation in order to improve the microbiological safety of sea buckthorn. The experimental results indicated that the electron beam treatment might be a good method to remove undesirable microorganisms from sea buckthorn without significant changes in its active principles.

  17. The most prominent safety guarantees

    International Nuclear Information System (INIS)

    Lucenet, G.

    1978-01-01

    The Creys-Malville Nuclear Centre has been designed using the safety analysis implemented since the beginning of the developments of breeder reactors in France and the Super Phenix follows almost the same safety regulations as its predecessor the Phenix reactor. These regulations are based on: 'Recommendations for the safety standards of the Super Phenix' drawn up by the French Safety Authorities in July 1973. The prominent points are summarised. (C.F.)

  18. Advisory Material for the IAEA Regulations for the Safe Transport of Radioactive Material (2012 Ed.). Specific Safety Guide

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-06-15

    This Safety Guide provides recommendations and guidance on achieving and demonstrating compliance with IAEA Safety Standards Series No. SSR-6, Regulations for the Safe Transport of Radioactive Material (2012 Edition), which establishes the requirements to be applied to the national and international transport of radioactive material. Transport is deemed to comprise all operations and conditions associated with and involved in the movement of radioactive material, including the design, fabrication and maintenance of packaging, and the preparation, consigning, handling, carriage, storage in transit and receipt at the final destination of packages. This publication supersedes IAEA Safety Standards Series No. TS-G-1.1 Rev. 1, which was issued in 2008.

  19. Trade Measures for Regulating Transboundary Movement of Electronic Waste

    Directory of Open Access Journals (Sweden)

    Gideon Emcee Christian

    2017-08-01

    Full Text Available International trade in used electrical and electronics equipment (UEEE provides an avenue for socio-economic development in the developing world and also serves as a conduit for transboundary dumping of waste electrical and electronic equipment (WEEE also referred to as electronic waste or e-waste. The latter problem arises from the absence of a regulatory framework for differentiating between functional UEEE and junk e-waste. This has resulted in both functional UEEE and junk e-waste being concurrently shipped to developing countries under the guise of international trade in used electronics. Dealing with these problems will require effective regulation of international trade in UEEE from both exporting and importing countries. Although, the export of e-waste from the European Community to developing countries is currently prohibited, significant amount of e-waste from the region continue to flow into developing countries due to lax regulatory measures in the latter. Hence, there is need for a regulatory regime in developing countries to complement the prohibitory regime in the major e-waste source countries. This paper proposes trade measures modelled in line with WTO rules which could be adopted by developing countries in addressing these problems. The proposed measures include the development of a compulsory certification and labelling system for functional UEEE as well as trade ban on commercial importation of UEEE not complying with the said certification and labelling system. The paper then goes further to examine these proposed measures in the light of WTO rules and jurisprudence.

  20. White paper on nuclear safety in 2005

    International Nuclear Information System (INIS)

    2006-04-01

    The white paper consists of four parts. The first part described the outline of international discussions on safety culture and activities promoted by utilities and regulatory bodies in Japan. The second part explained the main activities of the Nuclear Safety Commission of Japan and nuclear regulatory authorities on nuclear safety regulation. The third part introduced various activities for ensuring overall nuclear safety in Japan, such as safety regulation systems for nuclear facilities, disaster measures at nuclear facilities, progress in nuclear research, nuclear safety regulation by risk-informed utilization, environmental radiation surveys, international cooperation on nuclear safety. The forth part contained various materials and data related to the Nuclear Safety Commission of Japan. (J.P.N.)

  1. Utility regulation-The scope and structure of electrical safety regulation

    International Nuclear Information System (INIS)

    Abbott, Malcolm; Cohen, Bruce

    2011-01-01

    As a consequence of policies in Australia and New Zealand to increase competition in the utilities sector, regulatory agencies have been created in each state to provide independent and authorative advice on matters such as electricity pricing, access to infrastructure, service quality and security of supply. In addition arrangements have been established to maintain safety standards in the industry. The purpose of this paper is to discuss the major issues that have arisen in the creation of regulatory agencies responsible for electrical safety standards in Australia and New Zealand, and how they have impacted on liberalised electricity markets. - Highlights: → Policies in Australia and New Zealand to increase competition have led to the creation of electrical safety agencies. → These agencies have been created in response to perceived market failures. → There is a variance in agencies in terms of their independence and industry coverage. → These agencies have been created at a time of falling fatalities.

  2. Regulator and industry Co-operation on safety research: challenges and opportunities. Final report and answers to questionnaire

    International Nuclear Information System (INIS)

    2003-02-01

    A Group has been set up by the CSNI to identify and review the issues which hinder closer co-operation on research between regulators and industry, and to propose possible ways for resolving such issues while maintaining regulatory independence in decision-making. The Group has analyzed the potential advantages and disadvantages of regulator-industry collaboration in safety research and has also provided indications on how to overcome possible difficulties that can arise from such collaboration. The Group focused in particular on the issue of regulator independence, on means to preserve it and ways to demonstrate it to the public while undertaking collaboration with industry

  3. Transports of radioactive materials. Legal regulations, safety and security concepts, experience; Befoerderung radioaktiver Stoffe. Rechtsvorschriften, Sicherheits- und Sicherungskonzept, Erfahrungen

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Guenther

    2012-07-15

    In Germany, approximately 650,000 to 750,000 units containing radioactive materials for scientific, medical and technical applications are shipped annually by surface, air and water transports. Legally speaking, radioactive materials are dangerous goods which can cause hazards to life, health, property and the environment as a result of faulty handling or accidents in transit. For protection against these hazards, their shipment therefore is regulated in extensive national and international rules of protection and safety. The article contains a topical review of the international and national transport regulations and codes pertaining to shipments of radioactive materials, and of the protection concepts underlying these codes so as to ensure an adequate standard of safety and security in shipping radioactive materials in national and international goods traffic. (orig.)

  4. 78 FR 62362 - Revisions to Procedural Regulations Governing Transportation by Intrastate Pipelines; Electronic...

    Science.gov (United States)

    2013-10-21

    ...] Revisions to Procedural Regulations Governing Transportation by Intrastate Pipelines; Electronic Tariff... under the Commission's jurisdiction pursuant to the Natural Gas Policy Act of 1978 or the Natural Gas Act.\\1\\ Take notice that, effective November 12, 2013, the list of available eTariff Type of Filing...

  5. Using Simulations to Improve Electronic Health Record Use, Clinician Training and Patient Safety: Recommendations From A Consensus Conference

    OpenAIRE

    Mohan, Vishnu; Woodcock, Deborah; McGrath, Karess; Scholl, Gretchen; Pranaat, Robert; Doberne, Julie W.; Chase, Dian A.; Gold, Jeffrey A.; Ash, Joan S.

    2017-01-01

    A group of informatics experts in simulation, biomedical informatics, patient safety, medical education, and human factors gathered at Corbett, Oregon on April 30 and May 1, 2015. Their objective: to create a consensus statement on best practices for the use of electronic health record (EHR) simulations in education and training, to improve patient safety, and to outline a strategy for future EHR simulation work. A qualitative approach was utilized to analyze data from the conference and gene...

  6. Political economy and social psychology of nuclear safety

    International Nuclear Information System (INIS)

    Choe, Gwang Sik

    2009-03-01

    The contents of this book are consideration on independence of nuclear safety regulations, analysis of trend in internal and external on effectualness of nuclear safety regulations, political psychology of a hard whistle, how to deal with trust and distrust on regulation institute, international trend and domestic trend of nuclear safe culture, policy for building of trust of people on nuclear safety and regulations, measurement and conception of nuclear safety and for who imposes legal controls?

  7. Political economy and social psychology of nuclear safety

    Energy Technology Data Exchange (ETDEWEB)

    Choe, Gwang Sik

    2009-03-15

    The contents of this book are consideration on independence of nuclear safety regulations, analysis of trend in internal and external on effectualness of nuclear safety regulations, political psychology of a hard whistle, how to deal with trust and distrust on regulation institute, international trend and domestic trend of nuclear safe culture, policy for building of trust of people on nuclear safety and regulations, measurement and conception of nuclear safety and for who imposes legal controls?.

  8. Research study about the establishment of safety culture. Effects of organizational factors in construction industry's safety indices

    International Nuclear Information System (INIS)

    Kojima, Mitsuhiro; Hirose, Humiko; Takano, Kenichi; Hasegawa, Naoko

    1999-01-01

    To find the relationships between safety related activities (such as safety patrol' or '4s/5s activities') and accidents rate in the workplace, questionnaires were sent to 965 construction companies and 120 answers were returned. In this questionnaire, safety activities, safety regulations and safety policies of the companies were asked and organizational climates, company policies, philosophies and the number of accidents in workplace were also asked. There seems some relationships between accidents rate and safety activities, safety regulations and safety policies in the companies, but the deviations between estimate values and observed values are so great that it seems impossible to estimate the accidents rate in the working place from the safety activities, safety regulations and safety policies of the companies. On the other hand, some characteristics of safety activities and organizational climates in the construction industry were identified using multi variants analysis. More detailed researches using sophisticated questionnaire will be conducted in the construction industry and petrochemical industry and relationships between the accidents rate and the safety activities will be compared between different industries. (author)

  9. Electronic Cigarettes Efficacy and Safety at 12 Months: Cohort Study.

    Directory of Open Access Journals (Sweden)

    Lamberto Manzoli

    Full Text Available To evaluate the safety and efficacy as a tool of smoking cessation of electronic cigarettes (e-cigarettes, directly comparing users of e-cigarettes only, smokers of tobacco cigarettes only, and smokers of both.Prospective cohort study. Final results are expected in 2019, but given the urgency of data to support policies on electronic smoking, we report the results of the 12-month follow-up.Direct contact and structured questionnaires by phone or via internet.Adults (30-75 years were included if they were smokers of ≥1 tobacco cigarette/day (tobacco smokers, users of any type of e-cigarettes, inhaling ≥50 puffs weekly (e-smokers, or smokers of both tobacco and e-cigarettes (dual smokers. Carbon monoxide levels were tested in a sample of those declaring tobacco smoking abstinence.Sustained smoking abstinence from tobacco smoking at 12 months, reduction in the number of tobacco cigarettes smoked daily.We used linear and logistic regression, with region as cluster unit.Follow-up data were available for 236 e-smokers, 491 tobacco smokers, and 232 dual smokers (overall response rate 70.8%. All e-smokers were tobacco ex-smokers. At 12 months, 61.9% of the e-smokers were still abstinent from tobacco smoking; 20.6% of the tobacco smokers and 22.0% of the dual smokers achieved tobacco abstinence. Adjusting for potential confounders, tobacco smoking abstinence or cessation remained significantly more likely among e-smokers (adjusted OR 5.19; 95% CI: 3.35-8.02, whereas adding e-cigarettes to tobacco smoking did not enhance the likelihood of quitting tobacco and did not reduce tobacco cigarette consumption. E-smokers showed a minimal but significantly higher increase in self-rated health than other smokers. Non significant differences were found in self-reported serious adverse events (eleven overall.Adding e-cigarettes to tobacco smoking did not facilitate smoking cessation or reduction. If e-cigarette safety will be confirmed, however, the use of e

  10. Collaborative, cross-national studies on health and safety in seafaring for evidence-based Maritime policy and regulations.

    Science.gov (United States)

    Jensen, Olaf C

    2009-01-01

    Until recently, maritime health and safety policies and regulations were sparsely based on health and safety research, and only a small number of countries contributed to new research. To strengthen maritime health and safety research activities by presenting a study example and discussing the possibilities and needs for more national and cross-national research. In a cross-national epidemiological study example, the seafarers from eleven countries completed small, anonymous questionnaires concerning the working conditions on their latest tours at sea while waiting for their health examinations. Significant disparities were pointed out among the nationalities, e.g., the length of the tours at sea, the proportional distribution of officers and non-officers, the mean age structure, the injury incidence rates, and the differences of occupational safety standards. The analysis of all data together increased the statistical strength of the multivariate analyses and allowed for valid comparisons among the nationalities. The questionnaire data was used successfully in the collaborative study example, but other data sources and methods are useful for health and safety research in seafaring as well. More national and cross-national research on maritime health and safety is warranted.

  11. A survey of costs incurred in U.K. X-ray diffraction research laboratories as a consequence of proposed regulations for radiological safety

    International Nuclear Information System (INIS)

    Blow, D.M.

    1981-01-01

    A small survey of British X-ray diffraction laboratories was undertaken, with the aim of discovering the effects of the Health and Safety at Work Act (1974) and the draft regulations on radiological protection and ionising radiations (1978) on the practice of X-ray crystallography. The responses lead to the conclusion that the average cost incurred in bringing X-ray diffraction equipment to a safety standard compatible with the draft regulations (as judged by the respondents) will exceed Pound2,000 per X-ray generator. The safety costs will represent an overhead charge of at least 15-18% on the purchase of an X-ray generator, requiring additional capital outlay of over Pound5m to maintain the current level of X-ray diffraction activity in the U.K. There seems to be no evidence of a high accident rate with diffraction equipment, and the cost of the safety precautions bears no relation to the risks involved. (author)

  12. 78 FR 20277 - Safety Zones & Special Local Regulations; Recurring Marine Events in Captain of the Port Long...

    Science.gov (United States)

    2013-04-04

    .... Regulatory History and Information The Coast Guard promulgated safety zones and special local regulations for... first week of July. Location: Waters of the Connetquot River off Snapper Inn Restaurant, Oakdale, NY in...: Waters of Patchogue Bay off ``Lombardi's On the Bay'' restaurant, Patchogue, NY in approximate position...

  13. 33 CFR 165.1318 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Portland, OR Captain of...

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Security and Safety Zone Regulations, Large Passenger Vessel Protection, Portland, OR Captain of the Port Zone 165.1318 Section 165.1318 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND...

  14. Some Thoughts on Regulating Food Safety in China

    Institute of Scientific and Technical Information of China (English)

    Wang Lei

    2006-01-01

    The article analyses the current situation of food safety supervision in China, summarizes the deep reason behind the food safety and puts forward some suggestions to strengthen the supervision by using foreign references and advance operations from the legislation, the food safety supervision system and other aspects.

  15. Discussion on the safety classification of nuclear safety mechanical equipment

    International Nuclear Information System (INIS)

    Shen Wei

    2010-01-01

    The purpose and definition of the equipment safety classification in nuclear plant are introduced. The differences of several safety classification criterions are compared, and the object of safety classification is determined. According to the regulation, the definition and category of the safety functions are represented. The safety classification method, safety classification process, safety class interface, and the requirement for the safety class mechanical equipment are explored. At last, the relation of the safety classification between the mechanical and electrical equipment is presented, and the relation of the safety classification between mechanical equipment and system is also presented. (author)

  16. Regulation of photosynthetic electron flow in isolated chloroplasts by bicarbonate, formate and herbicides

    NARCIS (Netherlands)

    Snel, J.F.H.

    1985-01-01

    This thesis describes some efforts that were made to gain a better understanding of the processes involved in the regulation of photosynthetic electron flow by bicarbonate, formate and herbicides in chloroplasts. In the past decade a large amount of research has been devoted to get insight into the

  17. Discussion on building safety culture inside a nuclear safety regulatory body

    International Nuclear Information System (INIS)

    Fan Yumao

    2013-01-01

    A strong internal safety culture plays a key role in improving the performance of a nuclear regulatory body. This paper discusses the definition of internal safety culture of nuclear regulatory bodies, and explains the functions that the safety culture to facilitate the nuclear safety regulation and finally puts forward some thoughts about building internal safety culture inside regulatory bodies. (author)

  18. The nuclear safety regulation in Japan and the response to changes of circumstances surrounding the nuclear electricity generation

    International Nuclear Information System (INIS)

    Hombu, K.; Hirota, M.; Taniguchi, T.; Tanaka, N.; Akimoto, S.

    2001-01-01

    The influences of external factors on nuclear safety are discussed in this paper, based on the views on the circumstances of nuclear electricity generation. The following external factors, which might have some potential impacts on nuclear safety, are selected for discussion: (1) The deregulation in the electricity generation industry; (2) The modification of approval/certification system in the regulation of electricity generation; (3) The influences on social atmosphere due to the occurrence of a series of troubles; (4) The government reform and the structural adjustment of industry and (5) Others. Our further discussion seems to focus on the following 2 issues: (a) Whether nuclear power and the other electrical sources should compete with each other for short term economical cost, or whether factors of cost stability and competitiveness as well as longer term energy supply security and global environmental issues ranging over several decades should be considered; (b) How to realize the appropriate regulation from the perspective of public acceptance and confidence (when a series of troubles occur) without imposing unnecessary burdens on industry and without jeopardizing safety. These issues may be common among many countries and can be widely discussed. (author)

  19. 29 CFR 1926.105 - Safety nets.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Safety nets. 1926.105 Section 1926.105 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Personal Protective and Life Saving Equipment § 1926.105...

  20. Investigation on regulatory requirements for radiation safety management

    International Nuclear Information System (INIS)

    Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

    2013-01-01

    NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

  1. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    International Nuclear Information System (INIS)

    2010-01-01

    It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national policies and in revisions

  2. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    Energy Technology Data Exchange (ETDEWEB)

    2010-07-01

    It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national

  3. Radiation safety

    International Nuclear Information System (INIS)

    Van Riessen, A.

    2002-01-01

    Full text: Experience has shown that modem, fully enclosed, XRF and XRD units are generally safe. This experience may lead to complacency and ultimately a lowering of standards which may lead to accidents. Maintaining awareness of radiation safety issues is thus an important role for all radiation safety officers. With the ongoing progress in technology, a greater number of radiation workers are more likely to use a range of instruments/techniques - eg portable XRF, neutron beam analysis, and synchrotron radiation analysis. The source for each of these types of analyses is different and necessitates an understanding of the associated dangers as well as use of specific radiation badges. The trend of 'suitcase science' is resulting in scientists receiving doses from a range of instruments and facilities with no coordinated approach to obtain an integrated dose reading for an individual. This aspect of radiation safety needs urgent attention. Within Australia a divide is springing up between those who work on Commonwealth property and those who work on State property. For example a university staff member may operate irradiating equipment on a University campus and then go to a CSIRO laboratory to operate similar equipment. While at the University State regulations apply and while at CSIRO Commonwealth regulations apply. Does this individual require two badges? Is there a need to obtain two licences? The application of two sets of regulations causes unnecessary confusion and increases the workload of radiation safety officers. Radiation safety officers need to introduce risk management strategies to ensure that both existing and new procedures result in risk minimisation. A component of this strategy includes ongoing education and revising of regulations. AXAA may choose to contribute to both of these activities as a service to its members as well as raising the level of radiation safety for all radiation workers. Copyright (2002) Australian X-ray Analytical

  4. Decision of the Council of State on the general regulations for the safety of a disposal facility for reactor waste (398/91)

    International Nuclear Information System (INIS)

    1991-01-01

    These Regulations contain provisions for the safe planning, construction and use of final radioactive waste storage facilities. Licensees with a waste management obligation are responsible for ensuring the safety of such facilities. The Regulations entered into force on 1 March 1991. (NEA)

  5. Patient safety ward round checklist via an electronic app: implications for harm prevention.

    Science.gov (United States)

    Keller, C; Arsenault, S; Lamothe, M; Bostan, S R; O'Donnell, R; Harbison, J; Doherty, C P

    2017-11-06

    Patient safety is a value at the core of modern healthcare. Though awareness in the medical community is growing, implementing systematic approaches similar to those used in other high reliability industries is proving difficult. The aim of this research was twofold, to establish a baseline for patient safety practices on routine ward rounds and to test the feasibility of implementing an electronic patient safety checklist application. Two research teams were formed; one auditing a medical team to establish a procedural baseline of "usual care" practice and an intervention team concurrently was enforcing the implementation of the checklist. The checklist was comprised of eight standard clinical practice items. The program was conducted over a 2-week period and 1 month later, a retrospective analysis of patient charts was conducted using a global trigger tool to determine variance between the experimental groups. Finally, feedback from the physician participants was considered. The results demonstrated a statistically significant difference on five variables of a total of 16. The auditing team observed low adherence to patient identification (0.0%), hand decontamination (5.5%), and presence of nurse on ward rounds (6.8%). Physician feedback was generally positive. The baseline audit demonstrated significant practice bias on daily ward rounds which tended to omit several key-proven patient safety practices such as prompting hand decontamination and obtaining up to date reports from nursing staff. Results of the intervention arm demonstrate the feasibility of using the Checklist App on daily ward rounds.

  6. Towards an electronic dog nose: surface plasmon resonance immunosensor for security and safety.

    Science.gov (United States)

    Onodera, Takeshi; Toko, Kiyoshi

    2014-09-05

    This review describes an "electronic dog nose" based on a surface plasmon resonance (SPR) sensor and an antigen-antibody interaction for security and safety. We have concentrated on developing appropriate sensor surfaces for the SPR sensor for practical use. The review covers different surface fabrications, which all include variations of a self-assembled monolayer containing oligo(ethylene glycol), dendrimer, and hydrophilic polymer. We have carried out detection of explosives using the sensor surfaces. For the SPR sensor to detect explosives, the vapor or particles of the target substances have to be dissolved in a liquid. Therefore, we also review the development of sampling processes for explosives, and a protocol for the measurement of explosives on the SPR sensor in the field. Additionally, sensing elements, which have the potential to be applied for the electronic dog nose, are described.

  7. Towards an Electronic Dog Nose: Surface Plasmon Resonance Immunosensor for Security and Safety

    Directory of Open Access Journals (Sweden)

    Takeshi Onodera

    2014-09-01

    Full Text Available This review describes an “electronic dog nose” based on a surface plasmon resonance (SPR sensor and an antigen–antibody interaction for security and safety. We have concentrated on developing appropriate sensor surfaces for the SPR sensor for practical use. The review covers different surface fabrications, which all include variations of a self-assembled monolayer containing oligo(ethylene glycol, dendrimer, and hydrophilic polymer. We have carried out detection of explosives using the sensor surfaces. For the SPR sensor to detect explosives, the vapor or particles of the target substances have to be dissolved in a liquid. Therefore, we also review the development of sampling processes for explosives, and a protocol for the measurement of explosives on the SPR sensor in the field. Additionally, sensing elements, which have the potential to be applied for the electronic dog nose, are described.

  8. Shielding for high energy, high intensity electron accelerator installation

    International Nuclear Information System (INIS)

    Warawas, C.; Chongkum, S.

    1997-03-01

    The utilization of electron accelerators (eBA) is gradually increased in Thailand. For instance, a 30-40 MeV eBA are used for tumor and cancer therapy in the hospitals, and a high current eBA in for gemstone colonization. In the near future, an application of eBA in industries will be grown up in a few directions, e.g., flue gases treatment from the coal fire-power plants, plastic processing, rubber vulcanization and food preservation. It is the major roles of Office of Atomic Energy for Peace (OAEP) to promote the peaceful uses of nuclear energy and to regulate the public safety and protection of the environment. By taking into account of radiation safety aspect, high energy electrons are not only harmful to human bodies, but the radioactive nuclides can be occurred. This report presents a literature review by following the National Committee on Radiation Protection and Measurements (NCRP) report No.31. This reviews for parametric calculation and shielding design of the high energy (up to 100 MeV), high intensity electron accelerator installation

  9. Risk-informed regulation

    International Nuclear Information System (INIS)

    Hoffman, D.R.

    2003-01-01

    In assessing safety for nuclear facilities, regulators have traditionally used a deterministic approach. New techniques for assessing nuclear or radiological risks make it possible for regulators to incorporate risk insights into their regulations. By 'risk-informing' the regulatory processes, independent bodies tasked with protecting the health and safety of the public can focus on those design and operational issues most important to safety. Such an approach is a move away from prescriptive regulations that were based on conservative engineering judgments toward regulations focused on issues that contribute significantly to safety. Despite the availability of probabilistic risk assessment (PRA) tools, organisations often struggle with how to best use this capability. Most international regulations are still based largely on deterministic analyses that were developed without the benefit of quantitative or measurable estimates of risk. PRA considers issues of risk in a more comprehensive manner by examining a wider spectrum of initiating events and their frequency, and considers the likelihood of events in a rigorous and comprehensive manner. In some countries, nuclear regulators are actively moving toward increasing the use of risk insights in a variety of strategic arenas, including risk-informed technical specifications (operating limits and conditions), in-service inspection and testing, programs, and assessment and enforcement actions. A risk-informed approach enhances the traditional deterministic approach by explicitly considering a broader range of safety challenges, focusing resources on the basis of risk significance, considering a broader range of counter measures to mitigate challenges, and explicitly identifying and quantifying uncertainties in analyses. (author)

  10. More safety by improving the safety culture

    International Nuclear Information System (INIS)

    Laaksonen, J.

    1993-01-01

    In its meeting in 1986, after Chernobyl accident, the INSAG group concluded, that the most important reason for the accident was lack of safety culture. Later the group realized that the safety culture, if it is well enough, can be used as a powerful tool to assess and develop practices affecting safety in any country. A comprehensive view on the various aspects of safety culture was presented in the INSAG-4 report published in 1991. Finland was among the first nations include the concept of safety culture in its regulations. This article describes the roles of government and the regulatory body in creating a national safety culture. How safety culture is seen in the operation of a nuclear power plant is also discussed. (orig.)

  11. Legal issues of the environmental safety regulation in the sphere of nanotechnology in Russian Federation

    International Nuclear Information System (INIS)

    Belokrylova, Ekaterina A

    2013-01-01

    Nowadays one of the principal innovative spheres in Russia is considered to be a rapid development of nanotechnology and nanomaterials and implementation its products into almost all fields of social and industrial life. Nevertheless, despite the pointed advantages an appearance of nano products has set not only a positive example of the scientific progress development and dynamics, but also a potential threat of possible risks for the environment and people's health in the case of its massive use when there is a lack of research about its impacts. In Russian Federation the problem of nanosafety regulation is extremely actual. A number of international documents have noted a lack of legal regulation in the sphere of nanotechnologies in Russian Federation. Thus, according to the strategic EU program, it's mentioned that in 2009 on an annual meeting of OECD Tour de Table Meeting in Paris (November, 2007) Russia took responsibility to develop a long term program of nanoindustry development by 2015 (Nanotechnology Action Plan for Russia-2015). The key role should be dedicated to the nanosafety aspects and potential risk assessment of nanomaterials for environment and humans' health. Unfortunately, until now Russia did not provide this document for discussion at the international level by the partners of nanoconsortcium. Indeed, from 2007 until nowadays in Russian Federation there are no a single federal act of legislation (federal'nyi zakon), establishing the state foundations of regulation of nanosafety. The only one Federeal Legal Act in the described sphere is the Federalniy Zakon from 19 July 2007 A bout the Russian corporation of nanotechnologies , which has established the principles of organization, activites, functions and termination of Rosnanotech. However, there are no articles dedicated to the environmental safety provision in regards of nano products applications. Also there is no complex federal act consolidating legal status of action in the field of

  12. Legal issues of the environmental safety regulation in the sphere of nanotechnology in Russian Federation

    Science.gov (United States)

    Belokrylova, Ekaterina A.

    2013-04-01

    Nowadays one of the principal innovative spheres in Russia is considered to be a rapid development of nanotechnology and nanomaterials and implementation its products into almost all fields of social and industrial life. Nevertheless, despite the pointed advantages an appearance of nano products has set not only a positive example of the scientific progress development and dynamics, but also a potential threat of possible risks for the environment and people's health in the case of its massive use when there is a lack of research about its impacts. In Russian Federation the problem of nanosafety regulation is extremely actual. A number of international documents have noted a lack of legal regulation in the sphere of nanotechnologies in Russian Federation. Thus, according to the strategic EU program, it's mentioned that in 2009 on an annual meeting of OECD Tour de Table Meeting in Paris (November, 2007) Russia took responsibility to develop a long term program of nanoindustry development by 2015 (Nanotechnology Action Plan for Russia-2015). The key role should be dedicated to the nanosafety aspects and potential risk assessment of nanomaterials for environment and humans' health. Unfortunately, until now Russia did not provide this document for discussion at the international level by the partners of nanoconsortcium. Indeed, from 2007 until nowadays in Russian Federation there are no a single federal act of legislation (federal'nyi zakon), establishing the state foundations of regulation of nanosafety. The only one Federeal Legal Act in the described sphere is the Federalniy Zakon from 19 July 2007 "About the Russian corporation of nanotechnologies", which has established the principles of organization, activites, functions and termination of Rosnanotech. However, there are no articles dedicated to the environmental safety provision in regards of nano products applications. Also there is no complex federal act consolidating legal status of action in the field of

  13. Regulation in the face of uncertainty: the evidence on electronic nicotine delivery systems (e-cigarettes).

    Science.gov (United States)

    Farsalinos, Konstantinos E; Le Houezec, Jacques

    2015-01-01

    Tobacco smoking is the largest single preventable cause of many chronic diseases and death. Effective treatments exist; however, few smokers use them and most try to quit by themselves. Most of the tobacco cigarette's toxicity is related to the combustion process. Models of harm reduction applied to tobacco suggest that switching from inhalation of combustible products to a noncombustible nicotine delivery product would likely result in a vast reduction in tobacco-related death and illness. Currently available evidence raises no doubt that electronic cigarettes (e-cigs) are by far less harmful than smoking (although probably not absolutely safe) and have the potential to be the most effective tobacco harm reduction products due to their unique property of resembling smoking and providing satisfaction to the user. A lot of controversy is surrounding e-cigs and their regulation, much of which is based on the precautionary principle. Although monitoring and further research is definitely needed, the arguments used to implement severe restrictions or bans are mostly hypothetical, weakly supported by evidence, and, in some cases, derived from mispresentation or misinterpretation of the study findings. Regulators should keep in mind that the target population is smokers who want to reduce or quit their deadly tobacco consumption. To achieve this goal, smokers should be honestly informed on the relative harmfulness of the different products. E-cigs are not tobacco products and are not used as medications. For this reason, a specific regulatory scheme is needed, separate from tobacco or medicinal products regulation. Regulation should implement specific quality criteria for products, rules for the exclusion of chemicals of reasonable concern, and appropriate testing for possible contaminants. Additionally, manufacturing standards derived from the food industry should be implemented and adjusted for specific conditions related to e-cigs. Finding the appropriate balance

  14. Current Approaches of Regulating Radiological Safety of Medical and Industrial Practices in Romania

    International Nuclear Information System (INIS)

    Goicea, C.

    2016-01-01

    The principal document regulating the radiological safety of ionizing radiation application in Romania is the “Fundamental Norms for Radiological Safety”. These norms establish the requirements concerning the assurance of radiological safety of occupational exposed workers, population and environment, in accordance with the provisions of Law 111/1996 on the safe deployment of nuclear activities, republished. Justification of practices for all new practices which lead to exposure to ionizing radiation shall be justified in writing by their initiator, underlining their economic, social or other nature advantages, in comparison with the detriment which they could cause to health. CNCAN authorise these practices, provided that they consider the justification as being thorough. The applicant, respectively the authorisation holder, has to demonstrate that all actions to ensure radiation protection optimization are undertaken, with a view to ensure that all exposures, including the potential ones, within the framework of practice developed are maintained at the lowest reasonable achievable level, taking into account the economic and social factors: ALARA principle.

  15. Data-driven drug safety signal detection methods in pharmacovigilance using electronic primary care records: A population based study

    Directory of Open Access Journals (Sweden)

    Shang-Ming Zhou

    2017-04-01

    Data-driven analytic methods are a valuable aid to signal detection of ADEs from large electronic health records for drug safety monitoring. This study finds the methods can detect known ADE and so could potentially be used to detect unknown ADE.

  16. Development of safety performance indicators in Japan

    International Nuclear Information System (INIS)

    Ohashi, H.; Tamao, S.; Tanaka, J.; Sawayama, T.

    2001-01-01

    For the purpose of safety regulations of operating nuclear power stations in Japan, the regulatory authorities utilize two types of regulations. One is the direct regulation, such as periodical inspection to inspect the function and performance of equipment important to safety, and the other is the audit type regulation such as preservation inspection to audit the compliance with the safety preservation rules. As performance indicators are expected to be an effective tool to evaluate the activities by audit type regulations, NUPEC is studying a comprehensive set of operational performance indicators to meet the effective evaluation method for the safety preservation activities in the audit type regulations under the frame of current safety regulation system. The study includes the establishment of comprehensive operational performance indicators applicable in Japan, the effective application of performance indicators to the current Japanese regulation, the clarification of the applicable scope of utilization, the possibility of applying the performance indicators. This report describes the present status of our performance indicator studies. After the completion of these studies the regulatory authorities will evaluate if and how the new set of comprehensive performance indicators could be introduced to Japanese regulatory scheme. (author)

  17. Global Nuclear Safety and Security Network

    International Nuclear Information System (INIS)

    Guo Lingquan

    2013-01-01

    The objectives of the Regulatory Network are: - to contribute to the effectiveness of nuclear regulatory systems; - to contribute to continuous enhancements, and - to achieve and promote radiation and nuclear safety and security by: • Enhancing the effectiveness and efficiency of international cooperation in the regulation of nuclear and radiation safety of facilities and activities; • Enabling adequate access by regulators to relevant safety and security information; • Promoting dissemination of information on safety and security issues as well as information of good practices for addressing and resolving these issues; • Enabling synergies among different web based networks with a view to strengthening and enhancing the global nuclear safety framework and serving the specific needs of regulators and international organizations; • Providing additional information to the public on international regulatory cooperation in safety and security matters

  18. Overview of nuclear safety regulations in countries of Easter Europe and the former Soviet Union. Working material

    International Nuclear Information System (INIS)

    1996-10-01

    The document contains a compilation of information on Nuclear Safety Regulations in countries of Eastern Europe and the Former Soviet Union provided by the representatives of Armenia, Bulgaria, Czech Republic, Hungary, Slovakia and Ukraine in the Steering Committee of the Extrabudgetary Programme on the Safety of WWER Nuclear Power Plants (the Steering Committee provides co-ordination and guidance to the IAEA on technical matters and serves as a forum for exchange of information with the European Commission and with other international and financial organizations). A separate abstract was prepared for each of the seven individual papers

  19. Experience with the 1985 UK ionizing radiation regulations: the regulators' viewpoint

    International Nuclear Information System (INIS)

    Bines, W.P.; Beaver, P.F.

    1991-01-01

    The Ionising Radiations Regulations 1985 achieved UK implementation of the Euratom Basic Safety Standards Directive; interim action has taken account of recent revisions of risk estimates and the regulations will not be revised in advance of renegotiation of the Euratom Directive. Wide ranging consultation, central to the development of health and safety legislation in the UK, leads to greater co-operation between regulators and regulated and more acceptable legislation. Examples of co-operation, also of methods of enforcement and the use made of them, are given. The authors conclude that the regulations have stood the test of experience well. (Author)

  20. Usability and Safety in Electronic Medical Records Interface Design: A Review of Recent Literature and Guideline Formulation.

    Science.gov (United States)

    Zahabi, Maryam; Kaber, David B; Swangnetr, Manida

    2015-08-01

    The objectives of this study were to (a) review electronic medical record (EMR) and related electronic health record (EHR) interface usability issues, (b) review how EMRs have been evaluated with safety analysis techniques along with any hazard recognition, and (c) formulate design guidelines and a concept for enhanced EMR interfaces with a focus on diagnosis and documentation processes. A major impact of information technology in health care has been the introduction of EMRs. Although numerous studies indicate use of EMRs to increase health care quality, there remain concerns with usability issues and safety. A literature search was conducted using Compendex, PubMed, CINAHL, and Web of Science databases to find EMR research published since 2000. Inclusion criteria included relevant English-language papers with subsets of keywords and any studies (manually) identified with a focus on EMR usability. Fifty studies met the inclusion criteria. Results revealed EMR and EHR usability problems to include violations of natural dialog, control consistency, effective use of language, effective information presentation, and customization principles as well as a lack of error prevention, minimization of cognitive load, and feedback. Studies focusing on EMR system safety made no objective assessments and applied only inductive reasoning methods for hazard recognition. On the basis of the identified usability problems and structure of safety analysis techniques, we provide EMR design guidelines and a design concept focused on the diagnosis process and documentation. The design guidelines and new interface concept can be used for prototyping and testing enhanced EMRs. © 2015, Human Factors and Ergonomics Society.

  1. Realism in nuclear criticality safety

    International Nuclear Information System (INIS)

    McLaughlin, T. P.

    2009-01-01

    Commercial nuclear power plant operation and regulation have made remarkable progress since the Three Mile Island Accident. This is attributed largely to a heavy dose of introspection and self-regulation by the industry and to a significant infusion of risk-informed and performance-based regulation by the Nuclear Regulatory Commission. This truly represents reality in action both by the plant operators and the regulators. On the other hand, the implementation of nuclear criticality safety in ex-reactor operations involving significant quantities of fissile material has not progressed, but, tragically, it has regressed. Not only is the practice of the discipline in excess of a factor of ten more expensive than decades ago; the trend continues. This unfortunate reality is attributed to a lack of coordination within the industry (as contrasted to what occurred in the reactor operations sector), and to a lack of implementation of risk-informed and performance-based regulation by the NRC While the criticality safety discipline is orders of magnitude smaller than the reactor safety discipline, both operators and regulators must learn from the progress made in reactor safety and apply it to the former to reduce the waste, inefficiency and potentially increased accident risks associated with current practices. Only when these changes are made will there be progress made toward putting realism back into nuclear criticality safety. (authors)

  2. Safety Education and Science.

    Science.gov (United States)

    Ralph, Richard

    1980-01-01

    Safety education in the science classroom is discussed, including the beginning of safe management, attitudes toward safety education, laboratory assistants, chemical and health regulation, safety aids, and a case study of a high school science laboratory. Suggestions for safety codes for science teachers, student behavior, and laboratory…

  3. Regulatory regime and its influence in the nuclear safety

    International Nuclear Information System (INIS)

    Laaksonen, J.

    1999-01-01

    Main elements of nuclear regulatory regime in general is presented. These elements are: national rules and safety regulations, system of nuclear facility licensing, activities of regulatory body. Regulatory body is needed to specify the national safety regulations, review and assess the safety documentation presented to support license application, make inspections to verify fulfilment of safety regulations and license conditions, monitor the quality of work processes of user organization, and to assess whether these processes provide a high safety level, promote high safety culture, promote maintenance and development of national infrastructure relevant to nuclear safety, etc

  4. Accumulation patterns of proper point defects in thermo-regulating coatings based on ZnO for space vehicles under electron irradiation

    International Nuclear Information System (INIS)

    Mikhajlov, M.M.; Sharafutdinova, V.V.

    1998-01-01

    The expansion of the band of the induced absorption of zinc oxide powders and thermo-regulating coatings based on ZnO for space vehicles is carried out after the 30 keV electron irradiation. Singularities of the growth of the intensity of individual components as a function of the accelerated electron flow are studied. It is found that power and exponential dependences with one or two components are characteristic for different color centers and different thermo-regulating coatings. The kinetics of the accumulation of free electrons is characterized by the maximum value of the electron flows at which the generation of color centers on pre-radiation defects is realized by the radiolysis of the pigment lattice

  5. Challenges in safety regulation of R and D activities for advanced technologies in DAE units

    International Nuclear Information System (INIS)

    Shukla, Dinesh Kumar

    2016-01-01

    DAE is engaged in intensive research and developmental activities, especially for advanced technologies such as accelerators, lasers, supercomputers, advanced materials and instrumentation. The starting point of an R and D project might be a hypothesis to be tested, problem to be solved, or the performance of an item to be improved, and there may be many possible solutions and technologies that could be used. R and D is quite different from designing, constructing, operating a plant. In these, precisely described result can be defined from the beginning and can be described in design specifications, process descriptions and procedures. However, while established procedures may be available to begin an R and D project, deviation from these procedures may occur often as a legitimate component of the conduct of R and D. Nevertheless, the R and D activities have to be performed in a manner which provides assurance that safety requirements are adequately addressed. Hence, the regulatory approach for enforcing the safety regulation in such facilities is also not as rigid as those for an operating industry. This paper is aimed to discuss some of the key challenges in regulating such R and D activities and also attempts to suggest a way forward. (author)

  6. Optimal Operation of Distribution Electronic Power Transformer Using Linear Quadratic Regulator Method

    Directory of Open Access Journals (Sweden)

    Mohammad Hosein Rezaei

    2011-10-01

    Full Text Available Transformers perform many functions such as voltage transformation, isolation and noise decoupling. They are indispensable components in electric power distribution system. However, at low frequencies (50 Hz, they are one of the heaviest and the most expensive equipment in an electrical distribution system. Nowadays, electronic power transformers are used instead of conventional power transformers that do voltage transformation and power delivery in power system by power electronic converter. In this paper, the structure of distribution electronic power transformer (DEPT are analized and then paid attention on the design of a linear-quadratic-regulator (LQR with integral action to improve dynamic performance of DEPT with voltage unbalance, voltage sags, voltage harmonics and voltage flicker. The presentation control strategy is simulated by MATLAB/SIMULINK. In addition, the results that are in terms of dc-link reference voltage, input and output voltages clearly show that a better dynamic performance can be achieved by using the LQR method when compared to other techniques.

  7. Overview of Development and Deployment of Codes, Standards and Regulations Affecting Energy Storage System Safety in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Conover, David R.

    2014-08-22

    This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

  8. Deterministic Safety Analysis for Nuclear Power Plants. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    The IAEA's Statute authorizes the Agency to establish safety standards to protect health and minimize danger to life and property - standards which the IAEA must use in its own operations, and which a State can apply by means of its regulatory provisions for nuclear and radiation safety. A comprehensive body of safety standards under regular review, together with the IAEA's assistance in their application, has become a key element in a global safety regime. In the mid-1990s, a major overhaul of the IAEA's safety standards programme was initiated, with a revised oversight committee structure and a systematic approach to updating the entire corpus of standards. The new standards that have resulted are of a high calibre and reflect best practices in Member States. With the assistance of the Commission on Safety Standards, the IAEA is working to promote the global acceptance and use of its safety standards. Safety standards are only effective, however, if they are properly applied in practice. The IAEA's safety services - which range in scope from engineering safety, operational safety, and radiation, transport and waste safety to regulatory matters and safety culture in organizations - assist Member States in applying the standards and appraise their effectiveness. These safety services enable valuable insights to be shared and I continue to urge all Member States to make use of them. Regulating nuclear and radiation safety is a national responsibility, and many Member States have decided to adopt the IAEA's safety standards for use in their national regulations. For the contracting parties to the various international safety conventions, IAEA standards provide a consistent, reliable means of ensuring the effective fulfilment of obligations under the conventions. The standards are also applied by designers, manufacturers and operators around the world to enhance nuclear and radiation safety in power generation, medicine, industry, agriculture, research and education

  9. Arianespace Launch Service Operator Policy for Space Safety (Regulations and Standards for Safety)

    Science.gov (United States)

    Jourdainne, Laurent

    2013-09-01

    Since December 10, 2010, the French Space Act has entered into force. This French Law, referenced as LOS N°2008-518 ("Loi relative aux Opérations Spatiales"), is compliant with international rules. This French Space Act (LOS) is now applicable for any French private company whose business is dealing with rocket launch or in orbit satellites operations. Under CNES leadership, Arianespace contributed to the consolidation of technical regulation applicable to launch service operators.Now for each launch operation, the operator Arianespace has to apply for an authorization to proceed to the French ministry in charge of space activities. In the files issued for this purpose, the operator is able to justify a high level of warranties in the management of risks through robust processes in relation with the qualification maintenance, the configuration management, the treatment of technical facts and relevant conclusions and risks reduction implementation when needed.Thanks to the historic success of Ariane launch systems through its more than 30 years of exploitation experience (54 successes in a row for latest Ariane 5 launches), Arianespace as well as European public and industrial partners developed key experiences and knowledge as well as competences in space security and safety. Soyuz-ST and Vega launch systems are now in operation from Guiana Space Center with identical and proved risks management processes. Already existing processes have been slightly adapted to cope with the new roles and responsibilities of each actor contributing to the launch preparation and additional requirements like potential collision avoidance with inhabited space objects.Up to now, more than 12 Ariane 5 launches and 4 Soyuz-ST launches have been authorized under the French Space Act regulations. Ariane 5 and Soyuz- ST generic demonstration of conformity have been issued, including exhaustive danger and impact studies for each launch system.This article will detail how Arianespace

  10. European regulations on nutraceuticals, dietary supplements and functional foods: A framework based on safety

    International Nuclear Information System (INIS)

    Coppens, Patrick; Fernandes da Silva, Miguel; Pettman, Simon

    2006-01-01

    This article describes the legislation that is relevant in the marketing of functional foods in the European Union (EU), how this legislation was developed as well as some practical consequences for manufacturers, marketers and consumers. It also addresses some concrete examples of how the EU's safety requirements for food products have impacted a range of product categories. In the late nineties, research into functional ingredients was showing promising prospects for the use of such ingredients in foodstuffs. Due mainly to safety concerns, these new scientific developments were accompanied by an urgent call for legislation. The European Commission 2000 White Paper on Food Safety announced some 80 proposals for new and improved legislation in this field. Among others, it foresaw the establishment of a General Food Law Regulation, laying down the principles of food law and the creation of an independent Food Authority endowed with the task of giving scientific advice on issues based upon scientific risk assessment with clearly separated responsibilities for risk assessment, risk management and risk communication. Since then, more than 90% of the White Paper proposals have been implemented. However, there is not, as such, a regulatory framework for 'functional foods' or 'nutraceuticals' in EU Food Law. The rules to be applied are numerous and depend on the nature of the foodstuff. The rules of the general food law Regulation are applicable to all foods. In addition, legislation on dietetic foods, on food supplements or on novel foods may also be applicable to functional foods depending on the nature of the product and on their use. Finally, the two proposals on nutrition and health claims and on the addition of vitamins and minerals and other substances to foods, which are currently in the legislative process, will also be an important factor in the future marketing of 'nutraceuticals' in Europe. The cornerstone of EU legislation on food products, including

  11. Risk based regulation: a convenient concept for legislation and regulation in the field of technical risks?

    International Nuclear Information System (INIS)

    Seiler, J.H.

    1998-01-01

    Legislation and regulation concerning risk activities are traditionally based on deterministic safety measures. This may lead to inefficient results: sometimes the law requires safety measures which are - from an economic viewpoint - not justified because of their poor cost-effectiveness; sometimes it does not require safety measures although they would be very efficient. The risk based regulation approach wants to make the law more efficient and to get more safety at less costs. Legislation and regulation should be based on terms of risk rather than on deterministic rules. Risk should be expressed in quantitative terms and risk regulation should be based on the cost-effectiveness of safety measures. Thus a most efficient (in the sense of the economic analysis of the law) strategy for safety and environmental law could be established. The approach is economically reasonable and theoretically convincing. Its practical implementation however raises a lot of technical and legal questions. The project 'Risk Based Regulation' (1996-1999), sponsored by the Swiss National Fund for Scientific Research, intends to evaluate the practical feasibility of the approach from a technical and a legal view. It contains a general part which describes the risk based regulation approach and its legal and technical questions, case studies which try to practically implement the risk based regulation approach; the case studies are: storage and management of explosives in the army, storage and management of explosives for non-military purposes, safety at work, accident prevention in the non-professional field (mainly road accidents), fire protection, transportation of dangerous goods, waste disposal: traditional waste, waste disposal: radioactive waste, nuclear energy (reactor safety), a synthesis with recommendations for the future legislation and regulation in the field of technical risks. The paper presents the project and its preliminary results. (author)

  12. Scrap uranium recycling via electron beam melting

    International Nuclear Information System (INIS)

    McKoon, R.

    1993-11-01

    A program is underway at the Lawrence Livermore National Laboratory (LLNL) to recycle scrap uranium metal. Currently, much of the material from forging and machining processes is considered radioactive waste and is disposed of by oxidation and encapsulation at significant cost. In the recycling process, uranium and uranium alloys in various forms will be processed by electron beam melting and continuously cast into ingots meeting applicable specifications for virgin material. Existing vacuum processing facilities at LLNL are in compliance with all current federal and state environmental, safety and health regulations for the electron beam melting and vaporization of uranium metal. One of these facilities has been retrofitted with an auxiliary electron beam gun system, water-cooled hearth, crucible and ingot puller to create an electron beam melt furnace. In this furnace, basic process R ampersand D on uranium recycling will be performed with the goal of eventual transfer of this technology to a production facility

  13. White paper on nuclear safety in 2004

    International Nuclear Information System (INIS)

    2005-05-01

    The white paper consists of four parts. The first part described the regulation of nuclear facility decommissioning and the clearance level at which the decommissioned waste materials are not necessarily treated as radioactive materials. The second part explained the main operations of the nuclear safety regulation of the Nuclear Safety Commission and the regulatory bodies in 2004 and Mihama unit 3 accident. The third part introduced various activities for the general preservation of nuclear safety in Japan, such as safety regulation systems for nuclear facilities, disaster preparedness of nuclear facilities, progress in nuclear research, environmental radiation surveys and international cooperation on nuclear safety. The forth part contained various materials and data related to the Nuclear Safety Commission. (J.P.N.)

  14. Methods for formulation of design basis accidents within a risk-informed approach to safety regulation of new nuclear power plants

    International Nuclear Information System (INIS)

    Beer, B.C.; Apostolakis, G.E.; Golay, M.W.

    2000-01-01

    Within a project sponsored by the U.S. Department of Energy (DOE) an investigation is being conducted into creating a risk-informed safety regulatory framework and design process based upon the use of probabilistic risk assessment (PRA). In conjunction with efforts to formulate an overall regulatory framework (i.e., reported in PSAM 5 by F. Duran, A. Camp, G. Apostolakis and M. Golay, 'A Framework for Regulatory Requirements and Industry Standards for New Nuclear Power Plants'), this paper addresses the potential role(s) of Design Basis Accidents (DBAs) within this new framework. Currently that role, if any, is unclear. In previous nuclear safety regulatory treatments, DBAs have been of great practical value for both designers and regulators. However, they have suffered from being inconsistently formulated, and lacking fundamental justification. Any DBA set is likely to be formulated uniquely for a specific reactor concept. The staff of any nuclear power plant (NPP) in the U.S. routinely calculates the likelihood of core damage, the likelihood of radioactive release and the likelihood of adverse health effects due to radioactive release. As the accuracy of such estimates improves industry-wide, safety regulators consider weighing these calculated risks more heavily than strict adherence to the prescriptive conservatisms of existing regulations, hence risk-informed regulation. DBAs, despite their prescriptive nature, can remain useful tools for regulators and designers in a risk-informed regulatory framework, providing that they can be formulated in a fashion consistent with the risk profiles of a plant. DBAs also offer the opportunity to take into account factors of uncertainty not captured in a PRA, which are typically addressed via defense-in-depth features and subjective judgements. Designers seeking only to create a plant having a calculated risk below a certain value, while minimizing cost, may find themselves in an inefficient trial-and-error process as they

  15. Europe's progress towards joint regulation of nuclear safety; Le cheminement de l'Europe vers une reglementation commune sur la surete nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Hennenhofer, G. [surete des installations nucleaires et la radioprotection, Ministere de l' Environnement, de la Protection de la nature et de la securite nucleaire (BMU) (Germany)

    2010-11-15

    Following the end of the Second World War, there was great hope for the use of nuclear energy for peaceful applications. In the beginning, the different approaches adopted by East and West led to the design of different types of reactors, with priority being given to rapid development of the reactor fleet. Cooperation between safety regulators only came about very gradually. The Chernobyl disaster was in this respect the trigger event, as it clearly showed that the effects of nuclear events do not stop at borders and that collaboration by the safety regulators in this field was essential. Texts such as the Convention on Nuclear Safety, requiring the creation of a regulatory body independent of economic interests, the other work done by IAEA on the issue of nuclear safety and, within the European context, the creation of WENRA, are all milestones along the path to close cooperation. The recently adopted European directive on the safety of nuclear installations is the natural successor to these achievements. The road to a common European vision of nuclear safety is now mapped out. Germany will be joining this movement and making its own contribution. (author)

  16. Brief report: Associations between in-person and electronic bullying victimization and missing school because of safety concerns among U.S. high school students.

    Science.gov (United States)

    Steiner, Riley J; Rasberry, Catherine N

    2015-08-01

    Although associations between bullying and health risk behaviors are well-documented, research on bullying and education-related outcomes, including school attendance, is limited. This study examines associations between bullying victimization (in-person and electronic) and missing school because of safety concerns among a nationally representative sample of U.S. high school students. We used logistic regression analyses to analyze data from the 2013 national Youth Risk Behavior Survey of students in grades 9-12. In-person and electronic victimization were each associated with increased odds of missing school due to safety concerns compared to no bullying victimization. Having been bullied both in-person and electronically was associated with greater odds of missing school compared to electronic bullying only for female students and in-person bullying only for male students. Collaborations between health professionals and educators to prevent bullying may improve school attendance. Published by Elsevier Ltd.

  17. A Response to Proposed Equal Employment Opportunity Commission Regulations on Employer-Sponsored Health, Safety, and Well-Being Initiatives.

    Science.gov (United States)

    2016-03-01

    The aim of this study was to identify areas of consensus in response to proposed Equal Employment Opportunity Commission Americans with Disabilities Act of 1990 and Genetic Information Nondiscrimination Act of 2008 regulations on employer-sponsored health, safety, and well-being initiatives. The consensus process included review of existing and proposed regulations, identification of key areas where consensus is needed, and a methodical consensus-building process. Stakeholders representing employees, employers, consulting organizations, and wellness providers reached consensus around five areas, including adequate privacy notice on how medical data are collected, used, and protected; effective, equitable use of inducements that influence participation in programs; observance of reasonable alternative standards; what constitutes reasonably designed programs; and the need for greater congruence between federal agency regulations. Employee health and well-being initiatives that are in accord with federal regulations are comprehensive, evidence-based, and are construed as voluntary by employees and regulators alike.

  18. Highway Safety, Economic Behavior, and Driving Environment

    OpenAIRE

    Keeler, Theodore E.

    1991-01-01

    Economic analysis has enhanced our understanding of the efficacy of highway safety regulations. Specifically, a consumer-theoretic literature has developed on drivers' responses to regulations, based on ideas first set forth by Lester lave and W. E. Weber (1970) and more fully thought out by Sam Peltzman (1975). Meanwhile, an empirical literature has also developed, testing hypotheses relating to the effects on safety of speed limits, safety-device regulations, and alcohol policies, among oth...

  19. Panel 1: Safety design criteria

    International Nuclear Information System (INIS)

    Yllera, Javier

    2013-01-01

    There is general consensus in the nuclear community, and more after the Fukushima accident, that the deployment of nuclear energy has to be done at the highest levels of nuclear safety and that safety cannot be compromised by other factors. It is well understood that reactors that are being licensed and the new generations of reactors that will be constructed in the future will need to reach higher safety levels than the existing ones. Several countries and international organizations or international groups are launching initiatives to harmonise safety goals, safety requirements, safety objectives, regulations, criteria or safety reference levels. There are differences in the meanings of these terms and the working approaches, but the overall purpose is the same: to specify how new plants can be safer. In this context, the IAEA has an statutory function for developing international nuclear safety standards. The IAEA safety standards are per se not mandatory for IAEA Member States. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA’s standards for use in their national regulations in different ways. The IAEA Safety Standards represent international consensus on what must constitute a high level of safety for nuclear installations. In the area of NPP design, IAEA safety standards that are published are intended to apply primarily to new plants. It might not be practicable to apply all the requirements to plants that are already in operation. In addition, the focus is primarily on plants with water cooled reactors

  20. The programme of the Minister of the Interior for technical regulations concerning the safety of nuclear facilities

    International Nuclear Information System (INIS)

    Berg, K.H.

    1977-01-01

    The BMI is responsible for the Atomic Energy Act being implemented. A survey is presented of the BMI's programme for setting up technical safety regulations (bar the KTA) according to the following categories: the structure of objects (hardware); the functions of machinery and human behaviour (software); know-how, abilities, responsibility of humans (live-ware); environment. (HP) [de

  1. Fusion reactor passive safety and ignitor risk-based regulation

    International Nuclear Information System (INIS)

    Zucchetti, M.

    1995-01-01

    Passive design features are more reliable than operator action of successful operation of active safety systems. Passive safety has usually been adopted for fission. The achievement of an inventory-based passive safety is difficult if the fusion reactor uses neutronic reactions. Ignitor is a high-magnetic field tokamak designed to study the physics of ignited plasmas. The safety goal for Ignitor is classification as a mobility-based passively safe machine

  2. On the role of safety culture in risk-informed regulation

    International Nuclear Information System (INIS)

    Sorensen, J.N.; Apostolakis, G.E.; Powers, D.A.

    2000-01-01

    There is a widespread belief that safety culture is an important contributor to safety of operations. The commonly accepted attributes of safety culture include good organizational communications, good organizational learning, and senior management commitment to safety. Safety culture may be particularly important in reducing latent errors in complex, well-defended systems. The role of regulatory bodies in fostering strong safety cultures remains unclear, and additional work is required to define the essential attributes of safety culture and to identify reliable performance indicators. (author)

  3. The development of regulations

    International Nuclear Information System (INIS)

    Slokan Dusic, D.; Levstek, M.F.; Stritar, A.

    2003-01-01

    In October 2002, The Act on Protection Against Ionising Radiation and Nuclear Safety which regulates all aspects of protection against ionising radiation and nuclear safety entered into force in Slovenia. The Slovenian government and its responsible ministries shall issue several governmental and ministerial regulations to support the above - mentioned act. The Slovenian Nuclear Safety Administration (SNSA) which acts within the Ministry of the Environment, Spatial Planing and Energy takes an active part in drafting the regulations which are defined in the act. Due to a very comprehensive and pretentious task, that is to be completed in a relatively short period of time, taking into consideration the involvement of stakeholders and all competent ministries, the SNSA within the Quality Management System developed a special procedure that insures the systematic approach to the preparation of regulations. The article will briefly represent the process that: defines the preparation, development, harmonisation, review, approval and issue of regulations and uniforms the format of developed regulations. (author)

  4. Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

    International Nuclear Information System (INIS)

    Chung, Dae Wook

    2011-01-01

    Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

  5. Nuclear criticality safety guide

    International Nuclear Information System (INIS)

    Pruvost, N.L.; Paxton, H.C.

    1996-09-01

    This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators

  6. Nuclear criticality safety guide

    Energy Technology Data Exchange (ETDEWEB)

    Pruvost, N.L.; Paxton, H.C. [eds.

    1996-09-01

    This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators.

  7. Safety- barrier diagrams

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan

    2008-01-01

    Safety-barrier diagrams and the related so-called 'bow-tie' diagrams have become popular methods in risk analysis. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The relation of safety-barrier diagrams to other methods such as fault...... trees and Bayesian networks is discussed. A simple method for quantification of safety-barrier diagrams is proposed. It is concluded that safety-barrier diagrams provide a useful framework for an electronic data structure that integrates information from risk analysis with operational safety management....

  8. Safety-barrier diagrams

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan

    2007-01-01

    Safety-barrier diagrams and the related so-called "bow-tie" diagrams have become popular methods in risk analysis. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The relation with other methods such as fault trees and Bayesian networks...... are discussed. A simple method for quantification of safety-barrier diagrams is proposed, including situations where safety barriers depend on shared common elements. It is concluded that safety-barrier diagrams provide a useful framework for an electronic data structure that integrates information from risk...... analysis with operational safety management....

  9. Trends in pharmacy staff’s perception of patient safety in Swedish community pharmacies after re-regulation of conditions

    DEFF Research Database (Denmark)

    Kälvemark Sporrong, Sofia; Nordén-Hägg, Annika

    2014-01-01

    pharmacies prior to and after the 2009 changes in regulation of the Swedish community pharmacy market. Methods: Questionnaires targeted at pharmacy staff before and after the changes in regulation (in 2008, 2011/12, and 2012/13 respectively) used four identical items, making comparisons of some aspects...... no significant differences. Conclusions: The comparison carried out in this study indicates a negative effect in Swedish community pharmacies on safety and quality issues, as experienced by pharmacy staff. It is recommended that the possible effects of healthcare reforms are assessed before implementation...

  10. Safety applications of computer based systems for the process industry

    International Nuclear Information System (INIS)

    Bologna, Sandro; Picciolo, Giovanni; Taylor, Robert

    1997-11-01

    Computer based systems, generally referred to as Programmable Electronic Systems (PESs) are being increasingly used in the process industry, also to perform safety functions. The process industry as they intend in this document includes, but is not limited to, chemicals, oil and gas production, oil refining and power generation. Starting in the early 1970's the wide application possibilities and the related development problems of such systems were recognized. Since then, many guidelines and standards have been developed to direct and regulate the application of computers to perform safety functions (EWICS-TC7, IEC, ISA). Lessons learnt in the last twenty years can be summarised as follows: safety is a cultural issue; safety is a management issue; safety is an engineering issue. In particular, safety systems can only be properly addressed in the overall system context. No single method can be considered sufficient to achieve the safety features required in many safety applications. Good safety engineering approach has to address not only hardware and software problems in isolation but also their interfaces and man-machine interface problems. Finally, the economic and industrial aspects of the safety applications and development of PESs in process plants are evidenced throughout all the Report. Scope of the Report is to contribute to the development of an adequate awareness of these problems and to illustrate technical solutions applied or being developed

  11. Japan reforms its nuclear safety

    International Nuclear Information System (INIS)

    Anon.

    2013-01-01

    The Fukushima Daiichi NPP accident deeply questioned the bases of nuclear safety and nuclear safety regulation in Japan. It also resulted in a considerable loss of public confidence in the safety of nuclear power across the world. Although the accident was caused by natural phenomena, institutional and human factors also largely contributed to its devastating consequences, as shown by the Japanese Diet's and Government's investigation reports. 'Both regulators and licensees were held responsible and decided to fully reconsider the existing approaches to nuclear safety. Consequently, the regulatory system underwent extensive reform based on the lessons learned from the accident,' Yoshihiro Nakagome, the President of Japan Nuclear Energy Safety Organisation, an ETSON member TSO, explains. (orig.)

  12. [Electronic Cigarettes: Lifestyle Gadget or Smoking Cessation Aid?].

    Science.gov (United States)

    Schuurmans, Macé M

    2015-07-01

    Electronic cigarettes (e-cigarettes) are vaporisers of liquids often containing nicotine. In the inhaled aerosol carcinogens, ultrafine and metal particles are detected usually in concentrations below those measured in tobacco smoke. Therefore, these products are expected to be less harmful. This has not yet been proven. The long-term safety of e-cigarettes is unknown. Short duration use leads to airway irritation and increased diastolic blood pressure. So far only two randomised controlled trials have investigated efficacy and safety of e-cigarettes for smoking cessation: No clear advantage was shown in comparison to smoking cessation medication. Due to insufficient evidence, e-cigarettes cannot be recommended for smoking cessation. Problematic are the lack of regulation and standardisation of e-cigarette products, which makes general conclusions impossible.

  13. Developments in safety standards and regulation

    International Nuclear Information System (INIS)

    Harbison, S.A.

    1994-01-01

    This paper explains, in broad terms, how regulatory control is exercised over licensed nuclear installations in the UK and how HSE has developed its safety standards to support its regulatory approach. It first sets out the scope of HSE's regulatory responsibilities, which NII exercises on its behalf, and briefly describes the licensing process and compliance monitoring through inspection over the life of a nuclear plant. It also refers to the role of assessment in NII's decision-making processes, and the part played in this by the consideration of costs and safety benefits. It then moves on to consider the challenges that HSE/NII are likely to face from the changing nuclear industry in the second half of the 1990s. (author)

  14. 49 CFR 385.317 - Will a safety audit result in a safety fitness determination by the FMCSA?

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Will a safety audit result in a safety fitness... SAFETY REGULATIONS SAFETY FITNESS PROCEDURES New Entrant Safety Assurance Program § 385.317 Will a safety audit result in a safety fitness determination by the FMCSA? A safety audit will not result in a safety...

  15. Sustainable Regulation of Information Sharing with Electronic Data Interchange by a Trust-Embedded Contract

    Directory of Open Access Journals (Sweden)

    Guanghua Han

    2017-06-01

    Full Text Available This paper studies the risks in demand information sharing applications by electronic soft-orders using electronic data interchange (EDI systems in e-commerce and aims to suggest a sustainable regulation mechanism with a trust-embedded contract. In a supply chain with one retailer and one supplier, the retailer solicits private forecasted demand and places soft-orders via EDI to the supplier. To ensure abundant supply, the retailer has an incentive to inflate her soft-orders, which potentially harms the credible information sharing and sustainability of business cooperation. Normally, the degree to which the supplier relies on the retailer’s order information is specified by trust, which is evaluated according to the retailer’s reputation and supplier’s intuition in this study. Based on standard game theory, we find that both the retailer’s order and the quantity of supplier prepared materials are independent of the retailer’s forecast. Therefore, EDI based information sharing in e-commerce without a regulation mechanism leads to inefficient demand information sharing. Since both the supplier and retailer are proved to faces huge of potential profit losses due to the failure of information sharing, the commerce by EDI based information sharing is full of risk and unsustainable. Therefore, a regulation mechanism that leaded by the retailer is proposed to establish ‘win-win’ sustainable cooperation. Numerical experiments highlight the value of trust, the impact of reputation and intuition in decisions, and the effectiveness of the regulation mechanism by a cost-sharing contract.

  16. A Weibull Approach for Enabling Safety-Oriented Decision-Making for Electronic Railway Signaling Systems

    Directory of Open Access Journals (Sweden)

    Emanuele Pascale

    2018-04-01

    Full Text Available This paper presents the advantages of using Weibull distributions, within the context of railway signaling systems, for enabling safety-oriented decision-making. Failure rates are used to statistically model the basic event of fault-tree analysis, and their value sizes the maximum allowable latency of failures to fulfill the safety target for which the system has been designed. Relying on field-return failure data, Weibull parameters have been calculated for an existing electronic signaling system and a comparison with existing predictive reliability data, based on exponential distribution, is provided. Results are discussed in order to drive considerations on the respect of quantitative targets and on the impact that a wrong hypothesis might have on the choice of a given architecture. Despite the huge amount of information gathered through the after-sales logbook used to build reliability distribution, several key elements for reliable estimation of failure rate values are still missing. This might affect the uncertainty of reliability parameters and the effort required to collect all the information. We then present how to intervene when operational failure rates present higher values compared to the theoretical approach: increasing the redundancies of the system or performing preventive maintenance tasks. Possible consequences of unjustified adoption of constant failure rate are presented. Some recommendations are also shared in order to build reliability-oriented logbooks and avoid data censoring phenomena by enhancing the functions of the electronic boards composing the system.

  17. Department of Energy Construction Safety Reference Guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    DOE has adopted the Occupational Safety and Health Administration (OSHA) regulations Title 29 Code of Federal Regulations (CFR) 1926 ``Safety and Health Regulations for Construction,`` and related parts of 29 CFR 1910, ``Occupational Safety and Health Standards.`` This nonmandatory reference guide is based on these OSHA regulations and, where appropriate, incorporates additional standards, codes, directives, and work practices that are recognized and accepted by DOE and the construction industry. It covers excavation, scaffolding, electricity, fire, signs/barricades, cranes/hoists/conveyors, hand and power tools, concrete/masonry, stairways/ladders, welding/cutting, motor vehicles/mechanical equipment, demolition, materials, blasting, steel erection, etc.

  18. Safety and efficacy of herbal tea for patients with diabetes mellitus

    OpenAIRE

    Siti Syarihan Abdullah; Ali Saleh Alkhoshaiban; Vasudevan Mani; Muhammad Eid Akkawi; Long Chiau Ming

    2016-01-01

    Purpose: The aim of this report is to review (i) safety and efficacy and (ii) medical marketing and regulation of Glucos Cut (GC) Tea. Methodology: The electronic databases such as PubMed, ScienceDirect, Google Scholar, and MEDLINE via EBSCOhost were searched with no limit to year of publication. Additional information was obtained from the Micromedex, “Medicines (Advertisement and Sales) Act 1956” and the “Guideline on Advertising of Medicines and Medicinal Products to General Public 2006...

  19. Periodic safety review of the HTR-10 safety analysis

    International Nuclear Information System (INIS)

    Chen Fubing; Zheng Yanhua; Shi Lei; Li Fu

    2015-01-01

    Designed by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University, the 10 MW High Temperature Gas-cooled Reactor-Test Module (HTR-10) is the first modular High Temperature Gas-cooled Reactor (HTGR) in China. According to the nuclear safety regulations of China, the periodic safety review (PSR) of the HTR-10 was initiated by INET after approved by the National Nuclear Safety Administration (NNSA) of China. Safety analysis of the HTR-10 is one of the key safety factors of the PSR. In this paper, the main contents in the review of safety analysis are summarized; meanwhile, the internal evaluation on the review results is presented by INET. (authors)

  20. Nano-food packaging: an overview of market, migration research, and safety regulations.

    Science.gov (United States)

    Bumbudsanpharoke, Nattinee; Ko, Seonghyuk

    2015-05-01

    Recently, food packages produced with nanoparticles, "nano-food packaging," have become more available in the current market. However, although the use of nanomaterials is increasing in food packaging applications, concern over toxicity affects consumer perceptions and acceptance. Quite a number of commercialized forms of nano-food packaging are coated or composited product with inorganic materials, for example, nanosilver and nanoclay as representative examples. Several studies have shown the possibility of nanomaterial migration from packaging or containers to foodstuff. The debate is still ongoing among researchers about the extent of migration and whether it is negligible and safe. Government agencies and stakeholders must hurry to determine use limitations and release conclusive legislation and regulations as soon as possible since nano-food packaging may have great impacts on human health. This paper aims to review the availability of nano-food packaging in the current market, report case studies on nanomaterial migration, and present the current status of safety regulations and management of nano-food packaging in leading countries across regions. This review should enable governments and researchers to develop further nanomaterial risk assessment studies. © 2015 Institute of Food Technologists®

  1. Evaluation of Electronic Healthcare Databases for Post-Marketing Drug Safety Surveillance and Pharmacoepidemiology in China.

    Science.gov (United States)

    Yang, Yu; Zhou, Xiaofeng; Gao, Shuangqing; Lin, Hongbo; Xie, Yanming; Feng, Yuji; Huang, Kui; Zhan, Siyan

    2018-01-01

    Electronic healthcare databases (EHDs) are used increasingly for post-marketing drug safety surveillance and pharmacoepidemiology in Europe and North America. However, few studies have examined the potential of these data sources in China. Three major types of EHDs in China (i.e., a regional community-based database, a national claims database, and an electronic medical records [EMR] database) were selected for evaluation. Forty core variables were derived based on the US Mini-Sentinel (MS) Common Data Model (CDM) as well as the data features in China that would be desirable to support drug safety surveillance. An email survey of these core variables and eight general questions as well as follow-up inquiries on additional variables was conducted. These 40 core variables across the three EHDs and all variables in each EHD along with those in the US MS CDM and Observational Medical Outcomes Partnership (OMOP) CDM were compared for availability and labeled based on specific standards. All of the EHDs' custodians confirmed their willingness to share their databases with academic institutions after appropriate approval was obtained. The regional community-based database contained 1.19 million people in 2015 with 85% of core variables. Resampled annually nationwide, the national claims database included 5.4 million people in 2014 with 55% of core variables, and the EMR database included 3 million inpatients from 60 hospitals in 2015 with 80% of core variables. Compared with MS CDM or OMOP CDM, the proportion of variables across the three EHDs available or able to be transformed/derived from the original sources are 24-83% or 45-73%, respectively. These EHDs provide potential value to post-marketing drug safety surveillance and pharmacoepidemiology in China. Future research is warranted to assess the quality and completeness of these EHDs or additional data sources in China.

  2. Safety of and regulations for nuclear fuel cycle facilities. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-05-01

    In order to compile information on the nature of the safety concerns and current status of the regulations concerning nuclear fuel cycle facilities in Member States, an IAEA Technical Committee meeting on this topic was convened from 8 to 12 May 2000 in Vienna. The present publication contains the results of this meeting. The contributions of the participants in Annex 3 exemplify the work done in some Member States to develop an adequate regulatory framework to oversee the safe operation of these facilities

  3. Use of electronic group method in assessing food safety training needs and delivery methods among international college students in the U.S.

    Science.gov (United States)

    Garden-Robinson, Julie; Eighmy, Myron A; Lyonga, Agnes Ngale

    2010-12-01

    The purpose of this study was to determine the types of unfamiliar foods international students in the U.S. encounter and to assess food safety information that international students would like to receive for mitigating risks associated with handling and preparing unfamiliar foods. The study identified preferred instructional delivery methods and media for receiving food safety training or information. An electronic group method was used for this study. The electronic group method was chosen to maximize group efficiency by allowing participants to share ideas simultaneously and anonymously with minimal use of time and resources.Types of different (unfamiliar) foods were grouped into major categories. Fast and ready-to-eat foods, and processed and frozen foods constituted a major change for some international students, who were accustomed to homemade and fresh foods in their countries. Participants were interested in receiving information about how to safely handle and prepare unfamiliar foods in their new environment. Preferred methods for receiving food safety information included written materials, online publications, presentations, and materials provided during student orientation. Food packages, websites, and television programs were other preferred methods of receiving food safety information. Copyright © 2010 Elsevier Ltd. All rights reserved.

  4. Leadership and Safety Culture: Leadership for Safety

    International Nuclear Information System (INIS)

    Fischer, E.

    2016-01-01

    Following the challenge to operate Nuclear Power Plants towards operational excellence, a highly skilled and motivated organization is needed. Therefore, leadership is a valuable success factor. On the other hand a well-engineered safety orientated design of NPP’s is necessary. Once built, an NPP constantly requires maintenance, ageing management and lifetime modifications. E.ON tries to keep the nuclear units as close as possible to the state of the art of science and technology. Not at least a requirement followed by our German regulation. As a consequence of this we are continuously challenged to improve our units and the working processes using national and international operational experiences too. A lot of modifications are driven by our self and by regulators. That why these institutions — authorities and independent examiners—contribute significantly to the safety success. Not that it is easy all the day. The relationship between the regulatory body, examiners and the utilities should be challenging but also cooperative and trustful within a permanent dialog. To reach the common goal of highest standards regarding nuclear safety all parties have to secure a living safety culture. Without this attitude there is a higher risk that safety relevant aspects may stay undetected and room for improvement is not used. Nuclear operators should always be sensitized and follow each single deviation. Leaders in an NPP-organization are challenged to create a safety-, working-, and performance culture based on clear common values and behaviours, repeated and lived along all of our days to create a least a strong identity in the staffs mind to the value of safety, common culture and overall performance. (author)

  5. The software safety analysis based on SFTA for reactor power regulating system in nuclear power plant

    International Nuclear Information System (INIS)

    Liu Zhaohui; Yang Xiaohua; Liao Longtao; Wu Zhiqiang

    2015-01-01

    The digitalized Instrumentation and Control (I and C) system of Nuclear power plants can provide many advantages. However, digital control systems induce new failure modes that differ from those of analog control systems. While the cost effectiveness and flexibility of software is widely recognized, it is very difficult to achieve and prove high levels of dependability and safety assurance for the functions performed by process control software, due to the very flexibility and potential complexity of the software itself. Software safety analysis (SSA) was one way to improve the software safety by identify the system hazards caused by software failure. This paper describes the application of a software fault tree analysis (SFTA) at the software design phase. At first, we evaluate all the software modules of the reactor power regulating system in nuclear power plant and identify various hazards. The SFTA was applied to some critical modules selected from the previous step. At last, we get some new hazards that had not been identified in the prior processes of the document evaluation which were helpful for our design. (author)

  6. The development and application of electronic information system for safety administration of newborns in the rooming-in care.

    Science.gov (United States)

    Wang, Fang; Dong, Jian-Cheng; Chen, Jian-Rong; Wu, Hui-Qun; Liu, Man-Hua; Xue, Li-Ly; Zhu, Xiang-Hua; Wang, Jian

    2015-01-01

    To independently research and develop an electronic information system for safety administration of newborns in the rooming-in care, and to investigate the effects of its clinical application. By VS 2010 SQL SERVER 2005 database and adopting Microsoft visual programming tool, an interactive mobile information system was established, with integrating data, information and knowledge with using information structures, information processes and information technology. From July 2011 to July 2012, totally 210 newborns from the rooming-in care of the Obstetrics Department of the Second Affiliated Hospital of Nantong University were chosen and randomly divided into two groups: the information system monitoring group (110 cases) and the regular monitoring group (100 cases). Incidence of abnormal events and degree of satisfaction were recorded and calculated. ① The wireless electronic information system has four main functions including risk scaling display, identity recognition display, nursing round notes board and health education board; ② statistically significant differences were found between the two groups both on the active or passive discovery rate of abnormal events occurred in the newborns (P<0.05) and the satisfaction degree of the mothers and their families (P<0.05); ③ the system was sensitive and reliable, and the wireless transmission of information was correct and safety. The system is with high practicability in the clinic and can ensure the safety for the newborns with improved satisfactions.

  7. Industrial safety in power plants

    International Nuclear Information System (INIS)

    1987-01-01

    The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

  8. Regulating nuclear fuel waste

    International Nuclear Information System (INIS)

    1995-01-01

    When Parliament passed the Atomic Energy Control Act in 1946, it erected the framework for nuclear safety in Canada. Under the Act, the government created the Atomic Energy Control Board and gave it the authority to make and enforce regulations governing every aspect of nuclear power production and use in this country. The Act gives the Control Board the flexibility to amend its regulations to adapt to changes in technology, health and safety standards, co-operative agreements with provincial agencies and policy regarding trade in nuclear materials. This flexibility has allowed the Control Board to successfully regulate the nuclear industry for more than 40 years. Its mission statement 'to ensure that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment' concisely states the Control Board's primary objective. The Atomic Energy Control Board regulates all aspects of nuclear energy in Canada to ensure there is no undue risk to health, safety, security or the environment. It does this through a multi-stage licensing process

  9. The Arabidopsis thylakoid chloride channel AtCLCe functions in chloride homeostasis and regulation of photosynthetic electron transport

    Directory of Open Access Journals (Sweden)

    Andrei eHerdean

    2016-02-01

    Full Text Available Chloride ions can be translocated across cell membranes through Cl− channels or Cl−/H+ exchangers. The thylakoid-located member of the Cl− channel CLC family in Arabidopsis thaliana (AtCLCe was hypothesized to play a role in photosynthetic regulation based on the initial photosynthetic characterization of clce mutant lines. The reduced nitrate content of Arabidopsis clce mutants suggested a role in regulation of plant nitrate homeostasis. In this study, we aimed to further investigate the role of AtCLCe in the regulation of ion homeostasis and photosynthetic processes in the thylakoid membrane. We report that the size and composition of proton motive force were mildly altered in two independent Arabidopsis clce mutant lines. Most pronounced effects in the clce mutants were observed on the photosynthetic electron transport of dark-adapted plants, based on the altered shape and associated parameters of the polyphasic OJIP kinetics of chlorophyll a fluorescence induction. Other alterations were found in the kinetics of state transition and in the macro-organisation of photosystem II supercomplexes, as indicated by circular dichroism measurements. Pre-treatment with KCl but not with KNO3 restored the wild-type photosynthetic phenotype. Analyses by transmission electron microscopy revealed a bow-like arrangement of the thylakoid network and a large thylakoid-free stromal region in chloroplast sections from the dark-adapted clce plants. Based on these data, we propose that AtCLCe functions in Cl− homeostasis after transition from light to dark, which affects chloroplast ultrastructure and regulation of photosynthetic electron transport.

  10. Impact of new environmental and safety regulations on uranium exploration, mining, milling and management of its waste. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    Concern for health, safety and the environment has grown rapidly during the last two decades. Exploitation of any mineral commodity, including uranium, involves the modification of the surrounding environment. Appropriate regulations governing such activities can assure good practices and minimize possible negative impacts on the environment and the health and safety of the workers and the general public. During the past few years, a number of countries have promulgated new regulations related to uranium exploitation, mining, milling and the related waste management. Recent regulations are stricter in terms of environmental assessment, mitigation, radiation protection and control of waste. The impact of those regulations in developed countries has resulted in better planning of operations, improvement in mine and mill designs and a more efficient approach to tailings management. The Meeting was attended by 25 participants from 17 countries representing government organizations and private industry. This document includes 21 papers presented at the Meeting on new experiences in major uranium producing countries on the subject, past producers, as well as on country where regulations and related regulatory structure are still at the early evolutionary stage. Each of the papers was indexed separately.

  11. Impact of new environmental and safety regulations on uranium exploration, mining, milling and management of its waste. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-09-01

    Concern for health, safety and the environment has grown rapidly during the last two decades. Exploitation of any mineral commodity, including uranium, involves the modification of the surrounding environment. Appropriate regulations governing such activities can assure good practices and minimize possible negative impacts on the environment and the health and safety of the workers and the general public. During the past few years, a number of countries have promulgated new regulations related to uranium exploitation, mining, milling and the related waste management. Recent regulations are stricter in terms of environmental assessment, mitigation, radiation protection and control of waste. The impact of those regulations in developed countries has resulted in better planning of operations, improvement in mine and mill designs and a more efficient approach to tailings management. The Meeting was attended by 25 participants from 17 countries representing government organizations and private industry. This document includes 21 papers presented at the Meeting on new experiences in major uranium producing countries on the subject, past producers, as well as on country where regulations and related regulatory structure are still at the early evolutionary stage. Each of the papers was indexed separately

  12. Scanning electron microscopic analyses of Ferrocyanide tank wastes for the Ferrocyanide safety program

    International Nuclear Information System (INIS)

    Callaway, W.S.

    1995-09-01

    This is Fiscal Year 1995 Annual Report on the progress of activities relating to the application of scanning electron microscopy in addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. The status of the FY 1995 activities directed towards establishing facilities capable of providing SEM based micro-characterization of ferrocyanide tank wastes is described. A summary of key events in the SEM task over FY 1995 and target activities in FY 1996 are presented. A brief overview of the potential applications of computer controlled SEM analytical data in light of analyses of ferrocyanide simulants performed by an independent contractor is also presented

  13. The role of probabilistic safety assessment and probabilistic safety criteria in nuclear power plant safety

    International Nuclear Information System (INIS)

    1992-01-01

    The purpose of this Safety Report is to provide guidelines on the role of probabilistic safety assessment (PSA) and a range of associated reference points, collectively referred to as probabilistic safety criteria (PSC), in nuclear safety. The application of this Safety Report and the supporting Safety Practice publication should help to ensure that PSA methodology is used appropriately to assess and enhance the safety of nuclear power plants. The guidelines are intended for use by nuclear power plant designers, operators and regulators. While these guidelines have been prepared with nuclear power plants in mind, the principles involved have wide application to other nuclear and non-nuclear facilities. In Section 2 of this Safety Report guidelines are established on the role PSA can play as part of an overall safety assurance programme. Section 3 summarizes guidelines for the conduct of PSAs, and in Section 4 a PSC framework is recommended and guidance is provided for the establishment of PSC values

  14. Safety Culture Activities of Russian Regulator (Rostechnadzor) TSOs

    International Nuclear Information System (INIS)

    Potapov, V.; Smetnik, A.; Murlis, D.

    2016-01-01

    Currently, the Federal Environmental, Industrial and Nuclear Supervision Service of Russia (Rostechnadzor) has two Technical and Scientific Support Organizations (TSOs): • FSUE VO “Safety”; • Scientific and Engineering Centre for Nuclear and Radiation Safety (SEC NRS). Both TSOs provide Rostechnadzor with scientific and technical support in the area of safety culture.

  15. Analysis of Driving Safety Criteria Based on National Regulations for the Suspension Systems of NGVs

    Directory of Open Access Journals (Sweden)

    Ronald Mauricio Martinod

    2015-01-01

    Full Text Available The work analyses the technical evaluation process of the suspension system for vehicles that have been adapted to natural-gas-fuelled engines from power light-duty gasoline, and diesel vehicles; this evaluation is done through a mechanical review established by national regulations. The development of this analysis is focused on establishing the relationship between the natural-gas-fuelled equipment and the dynamic effect caused by the extra-weight, according to two measuring criteria that determine the safety and driving comfort, these are: (i tire-road adhesion index; and (ii tire excitation phase angle. The paper also proposes new elements that can be added to the current national regulations and that are currently applied to assess the suspension of natural gas vehicles, recorded using a test standard benchmark for the evaluation of the suspension.

  16. A systematic approach to safety case maintenance

    International Nuclear Information System (INIS)

    Kelly, T.P.; McDermid, J.A.

    2001-01-01

    A crucial aspect of safety case management is the ongoing maintenance of the safety argument through life. Throughout the operational life of any system, changing regulatory requirements, additional safety evidence and a changing design can challenge the corresponding safety case. In order to maintain an accurate account of the safety of the system, all such challenges must be assessed for their impact on the original safety argument. This is increasingly being recognised by many safety standards. However, many safety engineers are experiencing difficulties with safety case maintenance at present, the prime reason being that they do not have a systematic and methodical approach by which to examine the impact of change on safety argument. The size and complexity of safety arguments and evidence being presented within safety cases is increasing. Nowhere is this more apparent than for Electrical, Electronic and Programmable Electronic systems attempting to comply with the requirements and recommendations of software and hardware safety standards such as and UK Defence Standards 00-54 [MoD. 00-54 Requirements of Safety Related Electronic Hardware in Defence Equipment. Ministry of Defence, Interim Defence Standard, 1999], 00-55 []. However, this increase in safety case complexity exacerbates problems of comprehension and maintainability later on in the system lifecycle. This paper defines and describes a tool-supported process, based upon the principles of goal structuring, that attempts to address these difficulties through facilitating the systematic impact assessment of safety case challenges

  17. Regulations and classification advice: transport safety

    International Nuclear Information System (INIS)

    Davies, M.; Owen, K.

    1990-01-01

    The packaging of radioactive material for transport must conform with the regulations of the International Atomic Energy Agency (IAEA). These regulations are extensive and complex and require specialist interpretation. Packaging must be designed to contain the material, to limit radiation to safe levels, and to maintain the material in a safe state under both normal and accident conditions. British Nuclear Fuels Ltd. (BNFL) developed the TRANAID expert system to provide automated expert advice on the subject. It is used at BNFL and by other users internationally. The system was produced to meet an internal BNFL emphasis on accurate consistent and reliable interpretation of the complex IAEA regulations; and to provide a commercial product which would meet an external need. TRANAID provides reliable and consistent advice on safe transport procedures which reduce the workload on scarce skilled personnel, and allows them to concentrate on their primary task of packaging design. TRANAID also avoids overclassifying radioactive shipments, which would lead to the use of more expensive packaging than strictly is required. The IAEA regulations are applied internationally, and so there is a large potential worldwide market. The indications from the initial response are that future sales and use are expected to more than cover the investment. Other non-quantifiable benefits include the provision of consistent advice within a uniform approach, the safe-guarding of knowledge of the IAEA regulations, training and improvement in the expertise of users, improved management control, and enhancement of the professional image of BNFL. (author)

  18. 33 CFR 165.20 - Safety zones.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety zones. 165.20 Section 165... WATERWAYS SAFETY REGULATED NAVIGATION AREAS AND LIMITED ACCESS AREAS Safety Zones § 165.20 Safety zones. A Safety Zone is a water area, shore area, or water and shore area to which, for safety or environmental...

  19. Ionising radiation: a guide to the Regulations

    International Nuclear Information System (INIS)

    Hughes, Donald.

    1986-01-01

    The author explains the basic requirements on health and safety personnel in relation to the Ionising Radiations Regulations 1985. The outline paper is presented under the following headings: Dose assessment, Interpretation and general regulations 1-5, Dose limitation regulations 6 and 7, Regulation of work - regulations 8-12, Dosimetry and medical surveillance - regulations 13-17, summary of records to be kept, entry to controlled areas, Control of radioactive substances -regulations 18-23, Monitoring of radiation regulation 24, Assessments and notifications - regulations 25-31, Safety of articles and equipment - regulations 32-34, Other guidance. (U.K.)

  20. China's nuclear safety regulatory body: The national nuclear safety administration

    International Nuclear Information System (INIS)

    Zhang Shiguan

    1991-04-01

    The establishment of an independent nuclear safety regulatory body is necessary for ensuring the safety of nuclear installations and nuclear fuel. Therefore the National Nuclear Safety Administration was established by the state. The aim, purpose, organization structure and main tasks of the Administration are presented. At the same time the practical examples, such as nuclear safety regulation on the Qinshan Nuclear Power Plant, safety review and inspections for the Daya Bay Nuclear Power Plant during the construction, and nuclear material accounting and management system in the nuclear fuel fabrication plant in China, are given in order to demonstrate the important roles having been played on nuclear safety by the Administration after its founding

  1. Global approaches to regulating electronic cigarettes

    OpenAIRE

    Kennedy, Ryan David; Awopegba, Ayodeji; De Le?n, Elaine; Cohen, Joanna E

    2016-01-01

    Objectives Classify and describe the policy approaches used by countries to regulate e-cigarettes. Methods National policies regulating e-cigarettes were identified by (1) conducting web searches on Ministry of Health websites, and (2) broad web searches. The mechanisms used to regulate e-cigarettes were classified as new/amended laws, or existing laws. The policy domains identified include restrictions or prohibitions on product: sale, manufacturing, importation, distribution, use, product d...

  2. 48 CFR 923.7001 - Nuclear safety.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Nuclear safety. 923.7001... ENVIRONMENT, CONSERVATION, OCCUPATIONAL SAFETY, AND DRUG-FREE WORKPLACE Environmental, Energy and Water Efficiency, Renewable Energy Technologies, and Occupational Safety Programs 923.7001 Nuclear safety. The DOE...

  3. Development and action plan for the alternative regulation instruments

    International Nuclear Information System (INIS)

    Kim, Jung Yul; Hagm, Yo Sang

    2004-02-01

    The goal of this study to provide highly practical model, needed for regulation if nuclear power safety to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit-cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency

  4. Development and action plan for the alternative regulation instruments

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Yul [Daegu Univ., Gyeongsan (Korea, Republic of); Hagm, Yo Sang [Korea Univ., Seoul (Korea, Republic of)

    2004-02-15

    The goal of this study to provide highly practical model, needed for regulation if nuclear power safety to regulation agency. Since nuclear power safety regulation has different characteristics, compared to general regulation, it is important to have new point of view and approach. But application possibility for regulation that guarantees the 'perfect safety' is very low. Therefore, it is important establish nuclear power safety regulation that is realistic as well as safety securing. In order to establish high quality regulation, evaluation of existing regulation must be done first. Thus in this study, 6 standards to evaluate existing regulation are suggested. They are clearness, efficiency, flexibility, reliability, responsibility and political consideration. Also, strategies to complement the weak points of regulatory governance, regulatory sunset, regulatory map, regulatory negotiation, regulatory benefit-cost analysis, etc. These strategies can be applied all in one regulation, and can strategically be selected for application. After analyzing the result if case analysis on nuclear furnace regulation for research study, agreement was made that it is most efficient to consider in the order if clearness reliability, flexibility, confidence, political consideration, administrative efficiency and economic efficiency.

  5. Prescribing safety, negotiating expertise

    International Nuclear Information System (INIS)

    Rolina, Gregory

    2010-01-01

    Owing to their presumed impact on the safety of high-risk installations, the interactions between regulators and the regulated are a major but seldom explored subject of research in risk management. A study by experts on human and organizational factors in nuclear safety sheds light on the various phases (and their effects) of the process whereby experts produce assessments. Light is shed on a 'negotiated expertise' typical of the French style of safety regulations in nuclear installations. It is based on an ongoing technical dialog between experts and operators ('French cooking' for Anglo-Saxons). This analysis of 'expertise' and thus of the 'logics of action' implemented by experts proposes a typology of actions that can be transposed to other sorts of risk or other fields of activity. It hands us the keys for understanding a very contemporary activity. (author)

  6. 78 FR 71675 - Update of the Office of Nuclear Reactor Regulation's Electronic Operating Reactor Correspondence

    Science.gov (United States)

    2013-11-29

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0260] Update of the Office of Nuclear Reactor Regulation's Electronic Operating Reactor Correspondence The U.S. Nuclear Regulatory Commission (NRC) is issuing this Federal Register notice to inform the public of a slight change in the manner of distribution of publicly available operating reactor licensing...

  7. What Can We Learn about Workplace Heat Stress Management from a Safety Regulator Complaints Database?

    Directory of Open Access Journals (Sweden)

    Alana Hansen

    2018-03-01

    Full Text Available Heat exposure can be a health hazard for many Australian workers in both outdoor and indoor situations. With many heat-related incidents left unreported, it is often difficult to determine the underlying causal factors. This study aims to provide insights into perceptions of potentially unsafe or uncomfortably hot working conditions that can affect occupational health and safety using information provided by the public and workers to the safety regulator in South Australia (SafeWork SA. Details of complaints regarding heat exposure to the regulator’s “Help Centre” were assembled in a dataset and the textual data analysed thematically. The findings showed that the majority of calls relate to indoor work environments such as kitchens, factories, and warehouses. The main themes identified were work environment, health effects, and organisational issues. Impacts of hot working conditions ranged from discomfort to serious heat-related illnesses. Poor management practices and inflexibility of supervisors featured strongly amongst callers’ concerns. With temperatures predicted to increase and energy prices escalating, this timely study, using naturalistic data, highlights accounts of hot working conditions that can compromise workers’ health and safety and the need for suitable measures to prevent heat stress. These could include risk assessments to assess the likelihood of heat stress in workplaces where excessively hot conditions prevail.

  8. Review of the Federal Motor Carrier Safety Regulations for Automated Commercial Vehicles: Preliminary Assessment of Interpretation and Enforcement Challenges, Questions, and Gaps

    Science.gov (United States)

    2018-03-01

    The Volpe National Transportation Systems Center (Volpe) reviewed the Federal Motor Carrier Safety Regulations (FMCSRs) to identify compliance and enforcement challenges related to the operation of automated commercial vehicles (CMVs) in interstate c...

  9. 49 CFR 41.119 - DOT regulated buildings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false DOT regulated buildings. 41.119 Section 41.119 Transportation Office of the Secretary of Transportation SEISMIC SAFETY § 41.119 DOT regulated buildings. (a) Each DOT Operating Administration with responsibility for regulating the structural safety of buildings...

  10. Risk regulation in environment, health and safety : Decision in the face of uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Ettlinger, L A [The Oxford Group, Baltimore, MD (United States)

    1999-12-01

    unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions.

  11. Risk regulation in environment, health and safety : Decision in the face of uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Ettlinger, L.A. [The Oxford Group, Baltimore, MD (United States)

    1999-12-01

    relationship are unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions.

  12. Risk regulation in environment, health and safety : Decision in the face of uncertainty

    International Nuclear Information System (INIS)

    Ettlinger, L.A.

    1999-01-01

    unlikely to be resolved solely by administrative reform, reliance on experts, or risk education because, generally, these reforms are focused strictly on narrowing the risk uncertainty. From economic principles, however, we recognize that the value of efforts to minimize this risk uncertainty (or to maximize the technical and scientific information about risks) is subject to 'diminishing marginal utility'. Thus, these efforts ultimately can be expected to become unpopular with both citizens and elected officials. We expect, therefore, that the outcome of the risk regulation debate, and ultimately environment, health and safety policy decisions, will primarily be determined by the values of the proponents and opponents as to the relative ranking of efficiency and equity. Most likely, the best means available for reforming risk regulation and making it more coherent and to avoid some of the costly mistakes of the past is to: 1. increase the resources available for identifying risks and effective responses to them, 2. build in mechanisms for informing the public that policy decisions using these regulations are value laden, and 3. publicize both the process and the outcomes of risk regulations and policy decisions

  13. The Policy Maker's Anguish: Regulating Personal Data Behavior Between Paradoxes and Dilemmas

    Science.gov (United States)

    Compañó, Ramón; Lusoli, Wainer

    Regulators in Europe and elsewhere are paying great attention to identity, privacy and trust in online and converging environments. Appropriate regulation of identity in a ubiquitous information environment is seen as one of the major drivers of the future Internet economy. Regulation of personal identity data has come to the fore including mapping conducted on digital personhood by the OECD; work on human rights and profiling by the Council of Europe andmajor studies by the European Commission with regard to self-regulation in the privacy market, electronic identity technical interoperability and enhanced safety for young people. These domains overlap onto an increasingly complex model of regulation of individuals' identity management, online and offline. This chapter argues that policy makers struggle to deal with issues concerning electronic identity, due to the apparently irrational and unpredictable behavior of users when engaging in online interactions involving identity management. Building on empirical survey evidence from four EU countries, we examine the first aspect in detail - citizens' management of identity in a digital environment. We build on data from a large scale (n = 5,265) online survey of attitudes to electronic identity among young Europeans (France, Germany, Spain, UK) conducted in August 2008. The survey asked questions about perceptions and acceptance of risks, general motivations, attitudes and behaviors concerning electronic identity. Four behavioral paradoxes are identified in the analysis: a privacy paradox (to date well known), but also a control paradox, a responsibility paradox and an awareness paradox. The chapter then examines the paradoxes in relation of three main policy dilemmas framing the debate on digital identity. The paper concludes by arguing for an expanded identity debate spanning policy circles and the engineering community.

  14. HSE's safety assessment principles for criticality safety

    International Nuclear Information System (INIS)

    Simister, D N; Finnerty, M D; Warburton, S J; Thomas, E A; Macphail, M R

    2008-01-01

    The Health and Safety Executive (HSE) published its revised Safety Assessment Principles for Nuclear Facilities (SAPs) in December 2006. The SAPs are primarily intended for use by HSE's inspectors when judging the adequacy of safety cases for nuclear facilities. The revised SAPs relate to all aspects of safety in nuclear facilities including the technical discipline of criticality safety. The purpose of this paper is to set out for the benefit of a wider audience some of the thinking behind the final published words and to provide an insight into the development of UK regulatory guidance. The paper notes that it is HSE's intention that the Safety Assessment Principles should be viewed as a reflection of good practice in the context of interpreting primary legislation such as the requirements under site licence conditions for arrangements for producing an adequate safety case and for producing a suitable and sufficient risk assessment under the Ionising Radiations Regulations 1999 (SI1999/3232 www.opsi.gov.uk/si/si1999/uksi_19993232_en.pdf). (memorandum)

  15. 75 FR 73946 - Worker Safety and Health Program: Safety Conscious Work Environment

    Science.gov (United States)

    2010-11-30

    ... Environment AGENCY: Office of the General Counsel, Department of Energy (DOE). ACTION: Notice of denial of... Nuclear Regulatory Commission's ``Safety-Conscious Work Environment'' guidelines as a model. DOE published.... Second, not only would instituting a ``Safety-Conscious Work Environment'' by regulation be redundant...

  16. Licensee responsibility for nuclear power plant safety

    International Nuclear Information System (INIS)

    Schneider, Horst

    2010-01-01

    Simple sentences easy to grasp are desirable in regulations and bans. However, in a legal system, their meaning must be unambiguous. Article 6, Paragraph 1 of the EURATOM Directive on a community framework for the nuclear safety of nuclear facilities of June 2009 states that 'responsibility for the nuclear safety of a nuclear facility is incumbent primarily on the licensee.' The draft 'Safety Criteria for Nuclear Power Plants, Revision D, April 2009' of the German Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety (BMU) (A Module 1, 'Safety Criteria for Nuclear Power Plants: Basic Safety Criteria' / '0 Principles' Paragraph 2) reads: 'Responsibility for ensuring safety rests with the licensee. He shall give priority to compliance with the safety goal over the achievement of other operational objectives.' In addition, the existing rules and regulations, whose rank is equivalent to that of international regulations, assign priority to the safety goal to be pursued by the licensee over all other objectives of the company. The operator's responsibility for nuclear safety can be required and achieved only on the basis of permits granted, which must meet legal requirements. The operator's proximity to plant operation is the reason for his 'primary responsibility.' Consequently, verbatim incorporation of Article 6, Paragraph 1 of the EURATOM Directive would only be a superscript added to existing obligations of the operator - inclusive of a safety culture designed as an incentive to further 'the spirit of safety-related actions' - without any new legal contents and consequences. In the reasons of the regulation, this would have to be clarified in addition to the cryptic wording of 'responsibility.. primarily,' at the same time expressing that operators and authorities work together in a spirit of openness and trust. (orig.)

  17. Improvement and rationalization of nuclear energy laws and regulations

    International Nuclear Information System (INIS)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chum; Kim, Hak Man; Oh, Ho Chul

    2002-03-01

    Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea

  18. Improvement and rationalization of nuclear energy laws and regulations

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Mo Sung; Chung, Gum Chun; Kim, Hak Man; Oh, Ho Chul [Cheongju Univ., Cheongju (Korea, Republic of)

    2001-03-15

    Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea.

  19. Improvement and rationalization of nuclear energy laws and regulations

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Byung Sun; Lee, Mo Sung; Chung, Gum Chum; Kim, Hak Man; Oh, Ho Chul [Chongju Univ., Cheongju (Korea, Republic of)

    2002-03-15

    Since the present legal system on nuclear safety regulation has some problems that refer to contents of regulatory provisions, this mid-report has preformed research on the legal basic theory of nuclear safety regulation. And then secondly this report analyzed the problems of each provisions and suggested the revision drafts on the basis of analyzing problems and the undergoing theory of nuclear safety regulation. In order to interpret easily this report finally took the cases of judicial precedents on nuclear safety regulation in USA, Germany, Japan and Korea.

  20. Regulation on the organizatjon of radiation safety control bodies

    International Nuclear Information System (INIS)

    1975-01-01

    This is a basic document on matters of structure, organization, objectives, rights, and responsibilities of agencies enforcing compliance with radiation safety standards set up in Bulgaria. Under Public Health Law and Ministerial Council Decree No. 117, the organization and management of radiation safety in Bulgaria is entrusted to the Ministry of Public Health (MPH). Within its agency, the State Sanitary Control, authorities specialized in the area of radiation safety are as follows: the Radiation Hygiene Division (RHD) of the MPH Hygiene-and Epidemiology Bureau (HEB); the Specialized Radiation Safety Inspectorate of the Research Institute of Radiobiology and Radiation Hygiene (RIRRH); the Radiation Hygiene Sections of country HEBs; and State sanitary Inspectors assigned to large establishments in the country. (G.G.)