Corporate social responsibility in public health: A case-study on HIV/AIDS epidemic by Johnson & Johnson company in Africa

Science.gov (United States)

Chattu, Vijay Kumar

2015-01-01

HIV/AIDS has claimed millions of lives in the global workforce and continues to remain a threat to many businesses. An estimated 36.5 million of working people are living with HIV; the global workforce has lost 28 million people from AIDS since the beginning of the epidemic. In the absence of access to treatment, this number could grow to 74 million by 2015. The epidemic continues to affect the working population through absenteeism, sickness and death. Corporate Social Responsibility (CSR) is an obligation that corporates have toward their employees, community and society. A review and documentation of one such CSR by Johnson & Johnson (a multinational company) for HIV/AIDS in Africa is presented here. Johnson & Johnson Company is involved in numerous projects around the world to combat the HIV/AIDS epidemic. The company is working to fight the spread of the disease and improve the quality of life for those living with the illness through various donations of its products and sponsorship of local programs. This case study also highlights different categories of CSR activities such as Cause Promotion, Cause related Marketing, Corporate Philanthropy, Corporate Social Marketing, Corporate Volunteering and Socially responsible business practices, which are discussed with specific examples from different countries in Africa. Conclusions: CSR of any business encompasses the economic, legal, ethical & discretionary expectation placed on the organization by society at a given point of time. CSR is therefore the obligation that corporations have toward their stakeholders and society in general which horizons beyond what is prescribed by law or union contracts. Johnson & Johnson has a proved history of being committed to caring for people and a good example of a company with a long history of citizenship and sustainability. PMID:25810667

Corporate social responsibility in public health: A case-study on HIV/AIDS epidemic by Johnson & Johnson company in Africa.

Science.gov (United States)

Chattu, Vijay Kumar

2015-01-01

HIV/AIDS has claimed millions of lives in the global workforce and continues to remain a threat to many businesses. An estimated 36.5 million of working people are living with HIV; the global workforce has lost 28 million people from AIDS since the beginning of the epidemic. In the absence of access to treatment, this number could grow to 74 million by 2015. The epidemic continues to affect the working population through absenteeism, sickness and death. Corporate Social Responsibility (CSR) is an obligation that corporates have toward their employees, community and society. A review and documentation of one such CSR by Johnson & Johnson (a multinational company) for HIV/AIDS in Africa is presented here. Johnson & Johnson Company is involved in numerous projects around the world to combat the HIV/AIDS epidemic. The company is working to fight the spread of the disease and improve the quality of life for those living with the illness through various donations of its products and sponsorship of local programs. This case study also highlights different categories of CSR activities such as Cause Promotion, Cause related Marketing, Corporate Philanthropy, Corporate Social Marketing, Corporate Volunteering and Socially responsible business practices, which are discussed with specific examples from different countries in Africa. CSR of any business encompasses the economic, legal, ethical & discretionary expectation placed on the organization by society at a given point of time. CSR is therefore the obligation that corporations have toward their stakeholders and society in general which horizons beyond what is prescribed by law or union contracts. Johnson & Johnson has a proved history of being committed to caring for people and a good example of a company with a long history of citizenship and sustainability.

Carl Hirschie Johnson

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education. Carl Hirschie Johnson. Articles written in Resonance – Journal of Science Education. Volume 11 Issue 5 May 2006 pp 22-31 General Article. Reminiscences from Pittendrigh's Last PhD Student · Carl Hirschie Johnson · More Details Fulltext PDF ...

FLUOR HANFORD SAFETY MANAGEMENT PROGRAMS

Energy Technology Data Exchange (ETDEWEB)

GARVIN, L. J.; JENSEN, M. A.

2004-04-13

This document summarizes safety management programs used within the scope of the ''Project Hanford Management Contract''. The document has been developed to meet the format and content requirements of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''. This document provides summary descriptions of Fluor Hanford safety management programs, which Fluor Hanford nuclear facilities may reference and incorporate into their safety basis when producing facility- or activity-specific documented safety analyses (DSA). Facility- or activity-specific DSAs will identify any variances to the safety management programs described in this document and any specific attributes of these safety management programs that are important for controlling potentially hazardous conditions. In addition, facility- or activity-specific DSAs may identify unique additions to the safety management programs that are needed to control potentially hazardous conditions.

Safety performance indicators program

International Nuclear Information System (INIS)

Vidal, Patricia G.

2004-01-01

In 1997 the Nuclear Regulatory Authority (ARN) initiated a program to define and implement a Safety Performance Indicators System for the two operating nuclear power plants, Atucha I and Embalse. The objective of the program was to incorporate a set of safety performance indicators to be used as a new regulatory tool providing an additional view of the operational performance of the nuclear power plants, improving the ability to detect degradation on safety related areas. A set of twenty-four safety performance indicators was developed and improved throughout pilot implementation initiated in July 1998. This paper summarises the program development, the main criteria applied in each stage and the results obtained. (author)

Concurrence of Stevens-Johnson Syndrome and Bilateral Parotitis after Minocycline Therapy

Directory of Open Access Journals (Sweden)

Jimi Yoon

2010-06-01

Full Text Available Minocycline is an antibiotic of tetracycline derivatives that is commonly used in the treatment of moderate to severe acne vulgaris. It has been reported to cause rare adverse events from mild cutaneous eruption to severe forms including drug-induced lupus, serum sickness-like reaction, and hypersensitivity reactions, etc. The risks of adverse events attributed to minocycline have not been ascertained reliably and there are concerns about the safety of minocycline which could possibly result in life-threatening events such as the Stevens-Johnson syndrome. Here we demonstrate an unusual case of Stevens-Johnson syndrome in conjunction with bilateral parotitis after the intake of minocycline in a Korean boy suggesting discreet use of the drug.

Initial evaluation of the Robert Wood Johnson Foundation Nurse Faculty Scholars program.

Science.gov (United States)

Hickey, Kathleen T; Hodges, Eric A; Thomas, Tami L; Coffman, Maren J; Taylor-Piliae, Ruth E; Johnson-Mallard, Versie M; Goodman, Janice H; Jones, Randy A; Kuntz, Sandra; Galik, Elizabeth; Gates, Michael G; Casida, Jesus M

2014-01-01

The Robert Wood Johnson Foundation Nurse Faculty Scholars (RWJF NFS) program was developed to enhance the career trajectory of young nursing faculty and to train the next generation of nurse scholars. Although there are publications that describe the RWJF NFS, no evaluative reports have been published. The purpose of this study was to evaluate the first three cohorts (n = 42 scholars) of the RWJF NFS program. A descriptive research design was used. Data were derived from quarterly and annual reports, and a questionnaire (seven open-ended questions) was administered via Survey Monkey Inc. (Palo Alto, CA, USA). During their tenure, scholars had on average six to seven articles published, were teaching/mentoring at the graduate level (93%), and holding leadership positions at their academic institutions (100%). Eleven scholars (26%) achieved fellowship in the American Academy of Nursing, one of the highest nursing honors. The average ratings on a Likert scale of 1 (not at all supportive) to 10 (extremely supportive) of whether or not RWJF had helped scholars achieve their goals in teaching, service, research, and leadership were 7.7, 8.0, 9.4, and 9.5, respectively. The majority of scholars reported a positive, supportive relationship with their primary nursing and research mentors; although, several scholars noted challenges in connecting for meetings or telephone calls with their national nursing mentors. These initial results of the RWJF NFS program highlight the success of the program in meeting its overall goal-preparing the next generation of nursing academic scholars for leadership in the profession. Copyright © 2014 Elsevier Inc. All rights reserved.

Patronage power: Rural electrification, river development, and Lyndon Johnson (1937--1939)

Science.gov (United States)

Dusek, Paul-Michael Mays

Few historians document Lyndon Johnson's efforts to construct a state-wide political machine at the local level early in his congressional career. The literature glorifies Johnson for hydroelectric river development and rural electrification. This thesis acknowledges the transformative nature of rural electrification in Central Texas through the efforts of Johnson but, more importantly, reveals how extensively Johnson sought to capitalize on the tail-end of the New Deal to utilize government-funded relief projects to establish a state-wide political machine. An analysis of the correspondence between Johnson, his local political operators, members of his state-wide network, and rural constituents reveals another layer to the complexity of Johnson and further exposes his ambitious, calculating nature. Johnson used rural electrification to first create a community of supporters in his congressional district then used rural electrification and multipurpose river development programs to cultivate political contacts across the state of Texas. This thesis explores the first time that Lyndon Johnson used patronage to develop a political community as a publicly elected official. Johnson pushed for constant expansion of operations to ensure a steady supply of new jobs while displaying a cavalier attitude about specific regulations regarding the allocation of funds. His machine manipulated and massaged congressional appropriations restrictions and utilized multiple congressional revenue streams to stretch finances further and lower overhead costs to increase the scope of operations thus further improving the lives of his constituents. Johnson also used this movement to efficiently and effectively construct a foundation for his political machine. This thesis also clarifies an early moment in Johnson's beliefs about civil rights. Instead of standing on principle, Johnson relied on extortion and threats to fight racism at this early juncture in his political career because of

On Johnson's Paradox: Hypothesis Verification

Science.gov (United States)

Noble, Clyde E.

1975-01-01

When H. M. Johnson argued that all inductive reasoning is based on the fallacy of affirming the consequent and cannot therefore establish the 'truth' of scientific hypotheses, he posed a paradox for strict empiricists. Author examined Johnson's argument. (Editor/RK)

Elements of a nuclear criticality safety program

International Nuclear Information System (INIS)

Hopper, C.M.

1995-01-01

Nuclear criticality safety programs throughout the United States are quite successful, as compared with other safety disciplines, at protecting life and property, especially when regarded as a developing safety function with no historical perspective for the cause and effect of process nuclear criticality accidents before 1943. The programs evolved through self-imposed and regulatory-imposed incentives. They are the products of conscientious individuals, supportive corporations, obliged regulators, and intervenors (political, public, and private). The maturing of nuclear criticality safety programs throughout the United States has been spasmodic, with stability provided by the volunteer standards efforts within the American Nuclear Society. This presentation provides the status, relative to current needs, for nuclear criticality safety program elements that address organization of and assignments for nuclear criticality safety program responsibilities; personnel qualifications; and analytical capabilities for the technical definition of critical, subcritical, safety and operating limits, and program quality assurance

2011 Annual Criticality Safety Program Performance Summary

Energy Technology Data Exchange (ETDEWEB)

Andrea Hoffman

2011-12-01

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection, an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The

10 CFR 70.62 - Safety program and integrated safety analysis.

Science.gov (United States)

2010-01-01

...; (iv) Potential accident sequences caused by process deviations or other events internal to the... have experience in nuclear criticality safety, radiation safety, fire safety, and chemical process... this safety program; namely, process safety information, integrated safety analysis, and management...

A Laboratory Safety Program at Delaware.

Science.gov (United States)

Whitmyre, George; Sandler, Stanley I.

1986-01-01

Describes a laboratory safety program at the University of Delaware. Includes a history of the program's development, along with standard safety training and inspections now being implemented. Outlines a two-day laboratory safety course given to all graduate students and staff in chemical engineering. (TW)

77 FR 70409 - System Safety Program

Science.gov (United States)

2012-11-26

...-0060, Notice No. 2] 2130-AC31 System Safety Program AGENCY: Federal Railroad Administration (FRA... rulemaking (NPRM) published on September 7, 2012, FRA proposed regulations to require commuter and intercity passenger railroads to develop and implement a system safety program (SSP) to improve the safety of their...

Johnson Space Center's Free Range Bicycle Program.- Fall 2015 Intern Report

Science.gov (United States)

Lee-Stockton, Willem

2015-01-01

NASA's Johnson Space Center is a big place, encompassing 1,620 acres and more than a hundred buildings. Furthermore, there are reportedly 15 thousand employees, all of which have somewhere to be. To facilitate the movement of all these people JSC has historically relied on human power. Pedaling their way towards deep space, bicycles have been the go to method. Currently there are about 200 Free Range Bicycles at JSC. Free Range Bicycles belong to nobody, except NASA, and are available for anybody to use. They are not to be locked or hidden (although frequently are) and the intention is that there will always be a bike to hop on to get where you're going (although it may not be the bike you rode in on). Although not without its own shortcomings, the Free Range Bicycle Program has continued to provide low cost, simple transportation for NASA's JSC. In addition to the approximately 200 Free Range Bicycles, various larger divisions (like engineering) will often buy a few dozen bikes for their team members to use or individuals will bring their own personal bike to either commute or use on site. When these bicycles fall into disrepair or are abandoned (from retirees etc) they become a problem at JSC. They are an eye sore, create a safety hazard and make it harder to find a working bike in a time of need. The Free Range Program hopes to address this first problem by "tagging out" abandoned or out of service bicycles. A bright orange "DO NOT OPERATE" tag is placed on the bike and given a serial number for tracking purposes. See picture to the right. If the bike has an active owner with intentions to repair the bike the bottom of the tag has instructions for how to claim the abandoned bicycle. After being tagged the owner of the bicycle has 30 days to claim the bicycle and either haul it off site or get it repaired (and labeled) in accordance with Johnson's Bicycle Policy. If the abandoned bicycle is not claimed within 30 days it becomes the property of the Government. The

Krsko NPP Periodic Safety Review program

International Nuclear Information System (INIS)

Basic, I.; Spiler, J.; Novsak, M.

2001-01-01

The need for conducting a Periodic Safety Review for the Krsko NPP has been clearly recognized both by the NEK and the regulator (SNSA). The PSR would be highly desirable both in the light of current trends in safety oversight practices and because of many benefits it is capable to provide. On January 11, 2001 the SNSA issued a decision requesting the Krsko NPP to prepare a program and determine a schedule for the implementation of the program for 'Periodic Safety Review of NPP Krsko'. The program, which is required to be in accordance with the IAEA safety philosophy and with the EU practice, was submitted for the approval to the SNSA by the end of March 2001. The paper summarizes Krsko NPP Periodic Safety Review Program [1] including implemented SNSA and IAEA Expert Mission comments.(author)

Aviation Safety/Automation Program Conference

Science.gov (United States)

Morello, Samuel A. (Compiler)

1990-01-01

The Aviation Safety/Automation Program Conference - 1989 was sponsored by the NASA Langley Research Center on 11 to 12 October 1989. The conference, held at the Sheraton Beach Inn and Conference Center, Virginia Beach, Virginia, was chaired by Samuel A. Morello. The primary objective of the conference was to ensure effective communication and technology transfer by providing a forum for technical interchange of current operational problems and program results to date. The Aviation Safety/Automation Program has as its primary goal to improve the safety of the national airspace system through the development and integration of human-centered automation technologies for aircraft crews and air traffic controllers.

AEC controlled area safety program

Energy Technology Data Exchange (ETDEWEB)

Hendricks, D W [Nevada Operations Office, Atomic Energy Commission, Las Vegas, NV (United States)

1969-07-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

AEC controlled area safety program

International Nuclear Information System (INIS)

Hendricks, D.W.

1969-01-01

The detonation of underground nuclear explosives and the subsequent data recovery efforts require a comprehensive pre- and post-detonation safety program for workers within the controlled area. The general personnel monitoring and environmental surveillance program at the Nevada Test Site are presented. Some of the more unusual health-physics aspects involved in the operation of this program are also discussed. The application of experience gained at the Nevada Test Site is illustrated by description of the on-site operational and safety programs established for Project Gasbuggy. (author)

Fusion safety program plan

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.; Herring, J.S.

1980-09-01

The program plan consists of research that has been divided into 13 different areas. These areas focus on the radioactive inventories that are expected in fusion reactors, the energy sources potentially available to release a portion of these inventories, and analysis and design techniques to assess and ensure that the safety risks associated with operation of magnetic fusion facilities are acceptably low. The document presents both long-term program requirements that must be fulfilled as part of the commercialization of fusion power and a five-year plan for each of the 13 different program areas. Also presented is a general discussion of magnetic fusion reactor safety, a method for establishing priorities in the program, and specific priority ratings for each task in the five-year plan

Highway Safety Program Manual: Volume 8: Alcohol in Relation to Highway Safety.

Science.gov (United States)

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 8 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) concentrates on alcohol in relation to highway safety. The purpose and objectives of the alcohol program are outlined. Federal authority in the area of highway safety and general policies regarding…

Implementation of a Radiological Safety Coach program

Energy Technology Data Exchange (ETDEWEB)

Konzen, K.K. [Safe Sites of Colorado, Golden, CO (United States). Rocky Flats Environmental Technology Site; Langsted, J.M. [M.H. Chew and Associates, Golden, CO (United States)

1998-02-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets.

Implementation of a Radiological Safety Coach program

International Nuclear Information System (INIS)

Konzen, K.K.

1998-01-01

The Safe Sites of Colorado Radiological Safety program has implemented a Safety Coach position, responsible for mentoring workers and line management by providing effective on-the-job radiological skills training and explanation of the rational for radiological safety requirements. This position is significantly different from a traditional classroom instructor or a facility health physicist, and provides workers with a level of radiological safety guidance not routinely provided by typical training programs. Implementation of this position presents a challenge in providing effective instruction, requiring rapport with the radiological worker not typically developed in the routine radiological training environment. The value of this unique training is discussed in perspective with cost-savings through better radiological control. Measures of success were developed to quantify program performance and providing a realistic picture of the benefits of providing one-on-one or small group training. This paper provides a description of the unique features of the program, measures of success for the program, a formula for implementing this program at other facilities, and a strong argument for the success (or failure) of the program in a time of increased radiological safety emphasis and reduced radiological safety budgets

Safety and Mission Assurance Knowledge Management Retention: Managing Knowledge for Successful Mission Operations

Science.gov (United States)

Johnson, Teresa A.

2006-01-01

Knowledge Management is a proactive pursuit for the future success of any large organization faced with the imminent possibility that their senior managers/engineers with gained experiences and lessons learned plan to retire in the near term. Safety and Mission Assurance (S&MA) is proactively pursuing unique mechanism to ensure knowledge learned is retained and lessons learned captured and documented. Knowledge Capture Event/Activities/Management helps to provide a gateway between future retirees and our next generation of managers/engineers. S&MA hosted two Knowledge Capture Events during 2005 featuring three of its retiring fellows (Axel Larsen, Dave Whittle and Gary Johnson). The first Knowledge Capture Event February 24, 2005 focused on two Safety and Mission Assurance Safety Panels (Space Shuttle System Safety Review Panel (SSRP); Payload Safety Review Panel (PSRP) and the latter event December 15, 2005 featured lessons learned during Apollo, Skylab, and Space Shuttle which could be applicable in the newly created Crew Exploration Vehicle (CEV)/Constellation development program. Gemini, Apollo, Skylab and the Space Shuttle promised and delivered exciting human advances in space and benefits of space in people s everyday lives on earth. Johnson Space Center's Safety & Mission Assurance team work over the last 20 years has been mostly focused on operations we are now beginning the Exploration development program. S&MA will promote an atmosphere of knowledge sharing in its formal and informal cultures and work processes, and reward the open dissemination and sharing of information; we are asking "Why embrace relearning the "lessons learned" in the past?" On the Exploration program the focus will be on Design, Development, Test, & Evaluation (DDT&E); therefore, it is critical to understand the lessons from these past programs during the DDT&E phase.

Public Health Service Safety Program

Energy Technology Data Exchange (ETDEWEB)

McBride, J R [Southwestern Radiological Health Laboratory, Las Vegas, NV (United States)

1969-07-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

Public Health Service Safety Program

International Nuclear Information System (INIS)

McBride, J.R.

1969-01-01

Off-Site Radiological Safety Programs conducted on past Plowshare experimental projects by the Southwestern Radiological Health Laboratory for the AEC will be presented. Emphasis will be placed on the evaluation of the potential radiation hazard to off-site residents, the development of an appropriate safety plan, pre- and post-shot surveillance activities, and the necessity for a comprehensive and continuing community relations program. In consideration of the possible wide use of nuclear explosives in industrial applications, a new approach to off-site radiological safety will be discussed. (author)

Digital signal processing for the Johnson noise thermometry: a time series analysis of the Johnson noise

International Nuclear Information System (INIS)

Moon, Byung Soo; Hwang, In Koo; Chung, Chong Eun; Kwon, Kee Choon; David, E. H.; Kisner, R.A.

2004-06-01

In this report, we first proved that a random signal obtained by taking the sum of a set of signal frequency signals generates a continuous Markov process. We used this random signal to simulate the Johnson noise and verified that the Johnson noise thermometry can be used to improve the measurements of the reactor coolant temperature within an accuracy of below 0.14%. Secondly, by using this random signal we determined the optimal sampling rate when the frequency band of the Johnson noise signal is given. Also the results of our examination on how good the linearity of the Johnson noise is and how large the relative error of the temperature could become when the temperature increases are described. Thirdly, the results of our analysis on a set of the Johnson noise signal blocks taken from a simple electric circuit are described. We showed that the properties of the continuous Markov process are satisfied even when some channel noises are present. Finally, we describe the algorithm we devised to handle the problem of the time lag in the long-term average or the moving average in a transient state. The algorithm is based on the Haar wavelet and is to estimate the transient temperature that has much smaller time delay. We have shown that the algorithm can track the transient temperature successfully

NASA Aviation Safety Program Systems Analysis/Program Assessment Metrics Review

Science.gov (United States)

Louis, Garrick E.; Anderson, Katherine; Ahmad, Tisan; Bouabid, Ali; Siriwardana, Maya; Guilbaud, Patrick

2003-01-01

The goal of this project is to evaluate the metrics and processes used by NASA's Aviation Safety Program in assessing technologies that contribute to NASA's aviation safety goals. There were three objectives for reaching this goal. First, NASA's main objectives for aviation safety were documented and their consistency was checked against the main objectives of the Aviation Safety Program. Next, the metrics used for technology investment by the Program Assessment function of AvSP were evaluated. Finally, other metrics that could be used by the Program Assessment Team (PAT) were identified and evaluated. This investigation revealed that the objectives are in fact consistent across organizational levels at NASA and with the FAA. Some of the major issues discussed in this study which should be further investigated, are the removal of the Cost and Return-on-Investment metrics, the lack of the metrics to measure the balance of investment and technology, the interdependencies between some of the metric risk driver categories, and the conflict between 'fatal accident rate' and 'accident rate' in the language of the Aviation Safety goal as stated in different sources.

Determination of Safety Performance Grade of NPP Using Integrated Safety Performance Assessment (ISPA) Program

International Nuclear Information System (INIS)

Chung, Dae Wook

2011-01-01

Since the beginning of 2000, the safety regulation of nuclear power plant (NPP) has been challenged to be conducted more reasonable, effective and efficient way using risk and performance information. In the United States, USNRC established Reactor Oversight Process (ROP) in 2000 for improving the effectiveness of safety regulation of operating NPPs. The main idea of ROP is to classify the NPPs into 5 categories based on the results of safety performance assessment and to conduct graded regulatory programs according to categorization, which might be interpreted as 'Graded Regulation'. However, the classification of safety performance categories is highly comprehensive and sensitive process so that safety performance assessment program should be prepared in integrated, objective and quantitative manner. Furthermore, the results of assessment should characterize and categorize the actual level of safety performance of specific NPP, integrating all the substantial elements for assessing the safety performance. In consideration of particular regulatory environment in Korea, the integrated safety performance assessment (ISPA) program is being under development for the use in the determination of safety performance grade (SPG) of a NPP. The ISPA program consists of 6 individual assessment programs (4 quantitative and 2 qualitative) which cover the overall safety performance of NPP. Some of the assessment programs which are already implemented are used directly or modified for incorporating risk aspects. The others which are not existing regulatory programs are newly developed. Eventually, all the assessment results from individual assessment programs are produced and integrated to determine the safety performance grade of a specific NPP

Brood Year 2004: Johnson Creek Chinook Salmon Supplementation Report, June 2004 through March 2006.

Energy Technology Data Exchange (ETDEWEB)

Gebhards, John S.; Hill, Robert; Daniel, Mitch [Nez Perce Tribe

2009-02-19

The Nez Perce Tribe, through funding provided by the Bonneville Power Administration, has implemented a small scale chinook salmon supplementation program on Johnson Creek, a tributary in the South Fork of the Salmon River, Idaho. The Johnson Creek Artificial Propagation Enhancement project was established to enhance the number of threatened Snake River spring/summer chinook salmon (Oncorhynchus tshawytscha) returning to Johnson Creek to spawn through artificial propagation. This was the sixth season of adult chinook broodstock collection in Johnson Creek following collections in 1998, 2000, 2001, 2002, and 2003. Weir installation was completed on June 21, 2004 with the first chinook captured on June 22, 2004 and the last fish captured on September 6, 2004. The weir was removed on September 18, 2004. A total of 338 adult chinook, including jacks, were captured during the season. Of these, 211 were of natural origin, 111 were hatchery origin Johnson Creek supplementation fish, and 16 were adipose fin clipped fish from other hatchery operations and therefore strays into Johnson Creek. Over the course of the run, 57 natural origin Johnson Creek adult chinook were retained for broodstock, transported to the South Fork Salmon River adult holding and spawning facility and held until spawned. The remaining natural origin Johnson Creek fish along with all the Johnson Creek supplementation fish were released upstream of the weir to spawn naturally. Twenty-seven Johnson Creek females were artificially spawned with 25 Johnson Creek males. Four females were diagnosed with high bacterial kidney disease levels resulting in their eggs being culled. The 27 females produced 116,598 green eggs, 16,531 green eggs were culled, with an average eye-up rate of 90.6% resulting in 90,647 eyed eggs. Juvenile fish were reared indoors at the McCall Fish Hatchery until November 2005 and then transferred to the outdoor rearing facilities during the Visual Implant Elastomer tagging operation

Pressure Safety Program Implementation at ORNL

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark [ORNL; Etheridge, Tom [ORNL; Oland, C. Barry [XCEL Engineering, Inc.

2013-01-01

The Oak Ridge National Laboratory (ORNL) is a US Department of Energy (DOE) facility that is managed by UT-Battelle, LLC. In February 2006, DOE promulgated worker safety and health regulations to govern contractor activities at DOE sites. These regulations, which are provided in 10 CFR 851, Worker Safety and Health Program, establish requirements for worker safety and health program that reduce or prevent occupational injuries, illnesses, and accidental losses by providing DOE contractors and their workers with safe and healthful workplaces at DOE sites. The regulations state that contractors must achieve compliance no later than May 25, 2007. According to 10 CFR 851, Subpart C, Specific Program Requirements, contractors must have a structured approach to their worker safety and health programs that at a minimum includes provisions for pressure safety. In implementing the structured approach for pressure safety, contractors must establish safety policies and procedures to ensure that pressure systems are designed, fabricated, tested, inspected, maintained, repaired, and operated by trained, qualified personnel in accordance with applicable sound engineering principles. In addition, contractors must ensure that all pressure vessels, boilers, air receivers, and supporting piping systems conform to (1) applicable American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (2004) Sections I through XII, including applicable code cases; (2) applicable ASME B31 piping codes; and (3) the strictest applicable state and local codes. When national consensus codes are not applicable because of pressure range, vessel geometry, use of special materials, etc., contractors must implement measures to provide equivalent protection and ensure a level of safety greater than or equal to the level of protection afforded by the ASME or applicable state or local codes. This report documents the work performed to address legacy pressure vessel deficiencies and comply

National Ignition Facility Project Site Safety Program

International Nuclear Information System (INIS)

Dun, C

2003-01-01

This Safety Program for the National Ignition Facility (NIF) presents safety protocols and requirements that management and workers shall follow to assure a safe and healthful work environment during activities performed on the NIF Project site. The NIF Project Site Safety Program (NPSSP) requires that activities at the NIF Project site be performed in accordance with the ''LLNL ES and H Manual'' and the augmented set of controls and processes described in this NIF Project Site Safety Program. Specifically, this document: (1) Defines the fundamental NIF site safety philosophy. (2) Defines the areas covered by this safety program (see Appendix B). (3) Identifies management roles and responsibilities. (4) Defines core safety management processes. (5) Identifies NIF site-specific safety requirements. This NPSSP sets forth the responsibilities, requirements, rules, policies, and regulations for workers involved in work activities performed on the NIF Project site. Workers are required to implement measures to create a universal awareness that promotes safe practice at the work site and will achieve NIF management objectives in preventing accidents and illnesses. ES and H requirements are consistent with the ''LLNL ES and H Manual''. This NPSSP and implementing procedures (e.g., Management Walkabout, special work procedures, etc.,) are a comprehensive safety program that applies to NIF workers on the NIF Project site. The NIF Project site includes the B581/B681 site and support areas shown in Appendix B

Functional summary statistics for the Johnson-Mehl model

DEFF Research Database (Denmark)

Møller, Jesper; Ghorbani, Mohammad

The Johnson-Mehl germination-growth model is a spatio-temporal point process model which among other things have been used for the description of neurotransmitters datasets. However, for such datasets parametric Johnson-Mehl models fitted by maximum likelihood have yet not been evaluated by means...... of functional summary statistics. This paper therefore invents four functional summary statistics adapted to the Johnson-Mehl model, with two of them based on the second-order properties and the other two on the nuclei-boundary distances for the associated Johnson-Mehl tessellation. The functional summary...... statistics theoretical properties are investigated, non-parametric estimators are suggested, and their usefulness for model checking is examined in a simulation study. The functional summary statistics are also used for checking fitted parametric Johnson-Mehl models for a neurotransmitters dataset....

Fusion safety program Annual report, Fiscal year 1995

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Carmack, W.J.

1995-12-01

This report summarizes the major activities of the Fusion Safety Program in FY-95. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions. Among the technical areas covered in this report are tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and the technical support for commercial fusion facility conceptual design studies. A final activity described is work to develop DOE Technical Standards for Safety of Fusion Test Facilities

Gap Analysis Approach for Construction Safety Program Improvement

Directory of Open Access Journals (Sweden)

Thanet Aksorn

2007-06-01

Full Text Available To improve construction site safety, emphasis has been placed on the implementation of safety programs. In order to successfully gain from safety programs, factors that affect their improvement need to be studied. Sixteen critical success factors of safety programs were identified from safety literature, and these were validated by safety experts. This study was undertaken by surveying 70 respondents from medium- and large-scale construction projects. It explored the importance and the actual status of critical success factors (CSFs. Gap analysis was used to examine the differences between the importance of these CSFs and their actual status. This study found that the most critical problems characterized by the largest gaps were management support, appropriate supervision, sufficient resource allocation, teamwork, and effective enforcement. Raising these priority factors to satisfactory levels would lead to successful safety programs, thereby minimizing accidents.

Health, safety and environmental research program

International Nuclear Information System (INIS)

Dinner, P.J.

1983-01-01

This report outlines the Health, Safety and Environmental Research Program being undertaken by the CFFTP. The Program objectives, relationship to other CFFTP programs, implementation plans and expected outputs are stated. Opportunities to build upon the knowledge and experience gained in safely managing tritium in the CANDU program, by addressing generic questions pertinent to tritium safety for fusion facilities, are identified. These opportunities exist across a broad spectrum of issues covering the anticipated behaviour of tritium in fusion facilities, the surrounding environment and in man

Seismic safety margins research program overview

International Nuclear Information System (INIS)

Tokarz, F.J.; Smith, P.D.

1978-01-01

A multiyear seismic research program has been initiated at the Lawrence Livermore Laboratory. This program, the Seismic Safety Margins Research Program (SSMRP) is funded by the U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. The program is designed to develop a probabilistic systems methodology for determining the seismic safety margins of nuclear power plants. Phase I, extending some 22 months, began in July 1978 at a funding level of approximately $4.3 million. Here we present an overview of the SSMRP. Included are discussions on the program objective, the approach to meet the program goal and objectives, end products, the probabilistic systems methodology, and planned activities for Phase I

Nuclear Criticality Safety Department Qualification Program

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1996-01-01

The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSD technical and managerial qualification as required by the Y-1 2 Training Implementation Matrix (TIM). This Qualification Program is in compliance with DOE Order 5480.20A and applicable Lockheed Martin Energy Systems, Inc. (LMES) and Y-1 2 Plant procedures. It is implemented through a combination of WES plant-wide training courses and professional nuclear criticality safety training provided within the department. This document supersedes Y/DD-694, Revision 2, 2/27/96, Qualification Program, Nuclear Criticality Safety Department There are no backfit requirements associated with revisions to this document

National HTGR safety program

International Nuclear Information System (INIS)

Davis, D.E.; Kelley, A.P. Jr.

1982-01-01

This paper presents an overview of the National HTGR Program in the US with emphasis on the safety and licensing strategy being pursued. This strategy centers upon the development of an integrated approach to organizing and classifying the functions needed to produce safe and economical nuclear power production. At the highest level, four plant goals are defined - Normal Operation, Core and Plant Protection, Containment Integrity and Emergency Preparedness. The HTGR features which support the attainment of each goal are described and finally a brief summary is provided of the current status of the principal safety development program supporting the validation of the four plant goals

History and Evolution of the Johnson Criteria.

Energy Technology Data Exchange (ETDEWEB)

Sjaardema, Tracy A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Smith, Collin S. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Birch, Gabriel Carisle [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2015-07-01

The Johnson Criteria metric calculates probability of detection of an object imaged by an optical system, and was created in 1958 by John Johnson. As understanding of target detection has improved, detection models have evolved to better model additional factors such as weather, scene content, and object placement. The initial Johnson Criteria, while sufficient for technology and understanding at the time, does not accurately reflect current research into target acquisition and technology. Even though current research shows a dependence on human factors, there appears to be a lack of testing and modeling of human variability.

Effective safety training program design

International Nuclear Information System (INIS)

Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

1991-01-01

Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

The Department of Energy nuclear criticality safety program

International Nuclear Information System (INIS)

Felty, J.R.

2004-01-01

This paper broadly covers key events and activities from which the Department of Energy Nuclear Criticality Safety Program (NCSP) evolved. The NCSP maintains fundamental infrastructure that supports operational criticality safety programs. This infrastructure includes continued development and maintenance of key calculational tools, differential and integral data measurements, benchmark compilation, development of training resources, hands-on training, and web-based systems to enhance information preservation and dissemination. The NCSP was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 97-2, Criticality Safety, and evolved from a predecessor program, the Nuclear Criticality Predictability Program, that was initiated in response to Defense Nuclear Facilities Safety Board Recommendation 93-2, The Need for Critical Experiment Capability. This paper also discusses the role Dr. Sol Pearlstein played in helping the Department of Energy lay the foundation for a robust and enduring criticality safety infrastructure.

DOE Defense Program (DP) safety programs. Final report, Task 003

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 003 of Subcontract 9-X52-W7423-1 was to provide LANL with support to the DOE Defense Program (DP) Safety Programs. The effort included the identification of appropriate safety requirements, the refinement of a DP-specific Safety Analysis Report (SAR) Format and Content Guide (FCG) and Comprehensive Review Plan (CRP), incorporation of graded approach instructions into the guidance, and the development of a safety analysis methodologies document. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective is provided here

Safety program considerations for space nuclear reactor systems

International Nuclear Information System (INIS)

Cropp, L.O.

1984-08-01

This report discusses the necessity for in-depth safety program planning for space nuclear reactor systems. The objectives of the safety program and a proposed task structure is presented for meeting those objectives. A proposed working relationship between the design and independent safety groups is suggested. Examples of safety-related design philosophies are given

Hydrology of the Johnson Creek Basin, Oregon

Science.gov (United States)

Lee, Karl K.; Snyder, Daniel T.

2009-01-01

The Johnson Creek basin is an important resource in the Portland, Oregon, metropolitan area. Johnson Creek forms a wildlife and recreational corridor through densely populated areas of the cities of Milwaukie, Portland, and Gresham, and rural and agricultural areas of Multnomah and Clackamas Counties. The basin has changed as a result of agricultural and urban development, stream channelization, and construction of roads, drains, and other features characteristic of human occupation. Flooding of Johnson Creek is a concern for the public and for water management officials. The interaction of the groundwater and surface-water systems in the Johnson Creek basin also is important. The occurrence of flooding from high groundwater discharge and from a rising water table prompted this study. As the Portland metropolitan area continues to grow, human-induced effects on streams in the Johnson Creek basin will continue. This report provides information on the groundwater and surface-water systems over a range of hydrologic conditions, as well as the interaction these of systems, and will aid in management of water resources in the area. High and low flows of Crystal Springs Creek, a tributary to Johnson Creek, were explained by streamflow and groundwater levels collected for this study, and results from previous studies. High flows of Crystal Springs Creek began in summer 1996, and did not diminish until 2000. Low streamflow of Crystal Springs Creek occurred in 2005. Flow of Crystal Springs Creek related to water-level fluctuations in a nearby well, enabling prediction of streamflow based on groundwater level. Holgate Lake is an ephemeral lake in Southeast Portland that has inundated residential areas several times since the 1940s. The water-surface elevation of the lake closely tracked the elevation of the water table in a nearby well, indicating that the occurrence of the lake is an expression of the water table. Antecedent conditions of the groundwater level and autumn

Fusion Safety Program annual report, fiscal year 1994

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Dolan, T.J.; Herring, J.S.; McCarthy, K.A.; Merrill, B.J.; Motloch, C.G.; Petti, D.A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities

USNRC HTGR safety research program overview

International Nuclear Information System (INIS)

Foulds, R.B.

1982-01-01

An overview is given of current activities and planned research efforts of the US Nuclear Regulatory Commission (NRC) HTGR Safety Program. On-going research at Brookhaven National Laboratory, Oak Ridge National Laboratory, Los Alamos National Laboratory, and Pacific Northwest Laboratory are outlined. Tables include: HTGR Safety Issues, Program Tasks, HTGR Computer Code Library, and Milestones for Long Range Research Plan

ATLAS program for advanced thermal-hydraulic safety research

International Nuclear Information System (INIS)

Song, Chul-Hwa; Choi, Ki-Yong; Kang, Kyoung-Ho

2015-01-01

Highlights: • Major achievements of the ATLAS program are highlighted in conjunction with both developing advanced light water reactor technologies and enhancing the nuclear safety. • The ATLAS data was shown to be useful for the development and licensing of new reactors and safety analysis codes, and also for nuclear safety enhancement through domestic and international cooperative programs. • A future plan for the ATLAS testing is introduced, covering recently emerging safety issues and some generic thermal-hydraulic concerns. - Abstract: This paper highlights the major achievements of the ATLAS program, which is an integral effect test program for both developing advanced light water reactor technologies and contributing to enhancing nuclear safety. The ATLAS program is closely related with the development of the APR1400 and APR"+ reactors, and the SPACE code, which is a best-estimate system-scale code for a safety analysis of nuclear reactors. The multiple roles of ATLAS testing are emphasized in very close conjunction with the development, licensing, and commercial deployment of these reactors and their safety analysis codes. The role of ATLAS for nuclear safety enhancement is also introduced by taking some examples of its contributions to voluntarily lead to multi-body cooperative programs such as domestic and international standard problems. Finally, a future plan for the utilization of ATLAS testing is introduced, which aims at tackling recently emerging safety issues such as a prolonged station blackout accident and medium-size break LOCA, and some generic thermal-hydraulic concerns as to how to figure out multi-dimensional phenomena and the scaling issue.

Regional Super ESPC Saves Energy and Dollars at NASA's Johnson Space Center

International Nuclear Information System (INIS)

Federal Energy Management Program

2001-01-01

This case study about energy saving performance contacts (ESPCs) presents an overview of how the NASA's Johnson Space Flight Center established an ESPC contract and the benefits derived from it. The Federal Energy Management Program instituted these special contracts to help federal agencies finance energy-saving projects at their facilities

Implementation of radiation safety program in a medical institution

International Nuclear Information System (INIS)

Palanca, Elena D.

1999-01-01

A medical institution that utilizes radiation for the diagnosis and treatment of diseases of malignancies develops and implements a radiation safety program to keep occupational exposures of radiation workers and exposures of non-radiation workers and the public to the achievable and a more achievable minimum, to optimize the use of radiation, and to prevent misadministration. The hospital radiation safety program is established by a core medical radiation committee composed of trained radiation safety officers and head of authorized users of radioactive materials and radiation machines from the different departments. The radiation safety program sets up procedural guidelines of the safe use of radioactive material and of radiation equipment. It offers regular training to radiation workers and radiation safety awareness courses to hospital staff. The program has a comprehensive radiation safety information system or radsis that circularizes the radiation safety program in the hospital. The radsis keeps the drafted and updated records of safety guides and policies, radioactive material and equipment inventory, personnel dosimetry reports, administrative, regulatory and licensing activity document, laboratory procedures, emergency procedures, quality assurance and quality control program process, physics and dosimetry procedures and reports, personnel and hospital staff training program. The medical radiation protection committee is tasked to oversee the actual implementation of the radiation safety guidelines in the different radiation facilities in the hospital, to review personnel exposures, incident reports and ALARA actions, operating procedures, facility inspections and audit reports, to evaluate the existing radiation safety procedures, to make necessary changes to these procedures, and make modifications of course content of the training program. The effective implementation of the radiation safety program provides increased confidence that the physician and

The radiation safety self-assessment program of Ontario Hydro

International Nuclear Information System (INIS)

Armitage, G.; Chase, W.J.

1987-01-01

Ontario Hydro has developed a self-assessment program to ensure that high quality in its radiation safety program is maintained. The self-assessment program has three major components: routine ongoing assessment, accident/incident investigation, and detailed assessments of particular radiation safety subsystems or of the total radiation safety program. The operation of each of these components is described

Using Contemporary Leadership Skills in Medication Safety Programs.

Science.gov (United States)

Hertig, John B; Hultgren, Kyle E; Weber, Robert J

2016-04-01

The discipline of studying medication errors and implementing medication safety programs in hospitals dates to the 1970s. These initial programs to prevent errors focused only on pharmacy operation changes - and not the broad medication use system. In the late 1990s, research showed that faulty systems, and not faulty people, are responsible for errors and require a multidisciplinary approach. The 2013 ASHP Statement on the Role of the Medication Safety Leader recommended that medication safety leaders be integrated team members rather than a single point of contact. Successful medication safety programs must employ a new approach - one that embraces the skills of all health care team members and positions many leaders to improve safety. This approach requires a new set of leadership skills based on contemporary management principles, including followership, team-building, tracking and assessing progress, storytelling and communication, and cultivating innovation, all of which promote transformational change. The application of these skills in developing or changing a medication safety program is reviewed in this article.

Nuclear safety training program (NSTP) for dismantling

International Nuclear Information System (INIS)

Cretskens, Pieter; Lenie, Koen; Mulier, Guido

2014-01-01

European Control Services (GDF Suez) has developed and is still developing specific training programs for the dismantling and decontamination of nuclear installations. The main topic in these programs is nuclear safety culture. We therefore do not focus on technical training but on developing the right human behavior to work in a 'safety culture' environment. The vision and techniques behind these programs have already been tested in different environments: for example the dismantling of the BN MOX Plant in Dessel (Belgium), Nuclear Safety Culture Training for Electrabel NPP Doel..., but also in the non-nuclear industry. The expertise to do so was found in combining the know-how of the Training and the Nuclear Department of ECS. In training, ECS is one of the main providers of education in risky tasks, like elevation and manipulation of charges, working in confined spaces... but it does also develop training on demand to improve safety in a certain topic. Radiation Protection is the core business in the Nuclear Department with a presence on most of the nuclear sites in Belgium. Combining these two domains in a nuclear safety training program, NSTP, is an important stage in a dismantling project due to specific contamination, technical and other risks. It increases the level of safety and leads to a harmonization of different working cultures. The modular training program makes it possible to evaluate constantly as well as in group or individually. (authors)

Medication safety programs in primary care: a scoping review.

Science.gov (United States)

Khalil, Hanan; Shahid, Monica; Roughead, Libby

2017-10-01

Medication safety plays an essential role in all healthcare organizations; improving this area is paramount to quality and safety of any wider healthcare program. While several medication safety programs in the hospital setting have been described and the associated impact on patient safety evaluated, no systematic reviews have described the impact of medication safety programs in the primary care setting. A preliminary search of the literature demonstrated that no systematic reviews, meta-analysis or scoping reviews have reported on medication safety programs in primary care; instead they have focused on specific interventions such as medication reconciliation or computerized physician order entry. This scoping review sought to map the current medication safety programs used in primary care. The current scoping review sought to examine the characteristics of medication safety programs in the primary care setting and to map evidence on the outcome measures used to assess the effectiveness of medication safety programs in improving patient safety. The current review considered participants of any age and any condition using care obtained from any primary care services. We considered studies that focussed on the characteristics of medication safety programs and the outcome measures used to measure the effectiveness of these programs on patient safety in the primary care setting. The context of this review was primary care settings, primary healthcare organizations, general practitioner clinics, outpatient clinics and any other clinics that do not classify patients as inpatients. We considered all quantitative studied published in English. A three-step search strategy was utilized in this review. Data were extracted from the included studies to address the review question. The data extracted included type of medication safety program, author, country of origin, aims and purpose of the study, study population, method, comparator, context, main findings and outcome

Stevens-Johnson syndrome after radiotherapy

International Nuclear Information System (INIS)

Howell, W.R.; Knight, A.L.; Scruggs, H.J.

1990-01-01

We have reported a case of classic Stevens-Johnson syndrome in association with treatment using a cobalt radiation therapy unit. Previous reports of such an association have been extremely rare. At the time of the reaction, the patient's only medications were methyldopa and trichlormethiazide. Other drugs in the thiazide class have been associated with such a reaction. We feel this is an unlikely association in our patient, however, because she had been on trichlormethiazide for a number of years. This report suggests the role of radiotherapy as a rare cause of Stevens-Johnson syndrome. 14 references

Canadian hydrogen safety program

International Nuclear Information System (INIS)

MacIntyre, I.; Tchouvelev, A.V.; Hay, D.R.; Wong, J.; Grant, J.; Benard, P.

2007-01-01

The Canadian hydrogen safety program (CHSP) is a project initiative of the Codes and Standards Working Group of the Canadian transportation fuel cell alliance (CTFCA) that represents industry, academia, government, and regulators. The Program rationale, structure and contents contribute to acceptance of the products, services and systems of the Canadian Hydrogen Industry into the Canadian hydrogen stakeholder community. It facilitates trade through fair insurance policies and rates, effective and efficient regulatory approval procedures and accommodation of the interests of the general public. The Program integrates a consistent quantitative risk assessment methodology with experimental (destructive and non-destructive) failure rates and consequence-of-release data for key hydrogen components and systems into risk assessment of commercial application scenarios. Its current and past six projects include Intelligent Virtual Hydrogen Filling Station (IVHFS), Hydrogen clearance distances, comparative quantitative risk comparison of hydrogen and compressed natural gas (CNG) refuelling options; computational fluid dynamics (CFD) modeling validation, calibration and enhancement; enhancement of frequency and probability analysis, and Consequence analysis of key component failures of hydrogen systems; and fuel cell oxidant outlet hydrogen sensor project. The Program projects are tightly linked with the content of the International Energy Agency (IEA) Task 19 Hydrogen Safety. (author)

Occupational Safety and Health Programs in Career Education.

Science.gov (United States)

DiCarlo, Robert D.; And Others

This resource guide was developed in response to the Occupational Safety and Health Act of 1970 and is intended to assist teachers in implementing courses in occupational safety and health as part of a career education program. The material is a synthesis of films, programed instruction, slides and narration, case studies, safety pamphlets,…

NASA Pathways Co-op Tour Johnson Space Center Fall 2013

Science.gov (United States)

Masood, Amir; Osborne-Lee, Irwin W.

2013-01-01

This report outlines the tasks and objectives completed during a co-operative education tour with National Aeronautics and Space Association (NASA) at the Johnson Space Center in Houston, Texas. I worked for the Attitude & Pointing group of the Flight Dynamics Division within the Mission Operations Directorate at Johnson Space Center. NASA's primary mission is to support and expand the various ongoing space exploration programs and any research and development activities associated with it. My primary project required me to develop and a SharePoint web application for my group. My secondary objective was to become familiar with the role of my group which was primarily to provide spacecraft attitude and line of sight determination, including Tracking and Data Relay Satellite (TDRS) communications coverage for various NASA, International, and commercial partner spacecraft. My projects required me to become acquainted with different software systems, fundamentals of aerospace engineering, project management, and develop essential interpersonal communication skills. Overall, I accomplished multiple goals which included laying the foundations for an updated SharePoint which will allow for an organized platform to communicate and share data for group members and external partners. I also successfully learned about the operations of the Attitude & Pointing Group and how it contributes to the Missions Operations Directorate and NASA's Space Program as a whole

Sandia Laboratories environment and safety programs

International Nuclear Information System (INIS)

Zak, B.D.; McGrath, P.E.; Trauth, C.A. Jr.

1975-01-01

Sandia, one of ERDA's largest laboratories, is primarily known for its extensive work in the nuclear weapons field. In recent years, however, Sandia's role has expanded to embrace sizeable programs in the energy, resource recovery, and the environment and safety fields. In this latter area, Sandia has programs which address nuclear, fossil fuel, and general environment and safety issues. Here we survey ongoing activities and describe in more detail aa few projects of particular interest. These range from a study of the impact of sealed disposal of radioactive wastes, through reactor safety and fossil fuel plume chemistry, to investigations of the composition and dynamics of the stratosphere

OSHA Training Programs. Module SH-48. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Fusion safety program annual report fiscal year 1997

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C.

1998-01-01

This report summarizes the major activities of the Fusion Safety Program in FY 1997. The Idaho National Engineering and Environmental Laboratory (INEEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in FY 1979 to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEEL, different DOE laboratories, and other institutions. The technical areas covered in this report include chemical reactions and activation product release, tritium safety, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER) project. Work done for ITER this year has focused on developing the needed information for the Non-site Specific Safety Report (NSSR-2)

Fusion safety program annual report fiscal year 1997

Energy Technology Data Exchange (ETDEWEB)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C. [and others

1998-01-01

This report summarizes the major activities of the Fusion Safety Program in FY 1997. The Idaho National Engineering and Environmental Laboratory (INEEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in FY 1979 to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEEL, different DOE laboratories, and other institutions. The technical areas covered in this report include chemical reactions and activation product release, tritium safety, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER) project. Work done for ITER this year has focused on developing the needed information for the Non-site Specific Safety Report (NSSR-2).

Preliminary assessment of a water-quality monitoring program for total maximum daily loads in Johnson County, Kansas, January 2015 through June 2016

Science.gov (United States)

Rasmussen, Teresa J.; Paxson, Chelsea R.

2017-08-25

Municipalities in Johnson County in northeastern Kansas are required to implement stormwater management programs to reduce pollutant discharges, protect water quality, and comply with applicable water-quality regulations in accordance with National Pollutant Discharge Elimination System permits for stormwater discharge. To this end, municipalities collect grab samples at streams entering and leaving their jurisdiction to determine levels of excessive nutrients, sediment, and fecal bacteria to characterize pollutants and understand the factors affecting them.In 2014, the U.S. Geological Survey and the Johnson County Stormwater Management Program, with input from the Kansas Department of Health and Environment, initiated a 5-year monitoring program to satisfy minimum sampling requirements for each municipality as described by new stormwater permits issued to Johnson County municipalities. The purpose of this report is to provide a preliminary assessment of the monitoring program. The monitoring program is described, a preliminary assessment of the monitoring program design is provided using water-quality data collected during the first 2 years of the program, and the ability of the current monitoring network and sampling plan to provide data sufficient to quantify improvements in water quality resulting from implemented and planned best management practices is evaluated. The information in this initial report may be used to evaluate changes in data collection methods while data collection is still ongoing that may lead to improved data utility.Discrete water-quality samples were collected at 27 sites and analyzed for nutrients, Escherichia coli (E. coli) bacteria, total suspended solids, and suspended-sediment concentration. In addition, continuous water-quality data (water temperature, pH, dissolved oxygen, specific conductance, turbidity, and nitrate plus nitrite) were collected at one site to characterize variability and provide a basis for comparison to discrete

Water quality of streams in Johnson County, Kansas, 2002-07

Science.gov (United States)

Rasmussen, T.J.

2009-01-01

Water quality of streams in Johnson County, Kansas was evaluated from October 2002 through December 2007 in a cooperative study between the U.S. Geological Survey and the Johnson County Stormwater Management Program. Water quality at 42 stream sites, representing urban and rural basins, was characterized by evaluating benthic macroinvertebrates, water (discrete and continuous data), and/or streambed sediment. Point and nonpoint sources and transport were described for water-quality constituents including suspended sediment, dissolved solids and major ions, nutrients (nitrogen and phosphorus), indicator bacteria, pesticides, and organic wastewater and pharmaceutical compounds. The information obtained from this study is being used by city and county officials to develop effective management plans for protecting and improving stream quality. This fact sheet summarizes important results from three comprehensive reports published as part of the study and available on the World Wide Web at http://ks.water.usgs.gov/Kansas/studies/qw/joco/. ?? 2009 ASCE.

Johnsons Seagrass Critical Habitat

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — These data represent the critical habitat for Johnson's Seagrass as designated by Federal Register Vol. 65, No. 66, Wednesday, April 5, 2000, Rules and Regulations.

Fusion Safety Program Annual Report, Fiscal Year 1996

International Nuclear Information System (INIS)

Longhurst, G.R.; Anderl, R.A.; Cadwallader, L.C.

1996-12-01

This report summarizes the major activities of the Fusion Safety Program in FY 1996. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and Lockheed Martin Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. The objective is to perform research and develop data needed to ensure safety in fusion facilities. Activities include experiments, analysis, code development and application, and other forms of research. These activities are conducted at the INEL, at other DOE laboratories, and at other institutions. Among the technical areas covered in this report are tritium safety, chemical reactions and activation product release, risk assessment failure rate database development, and safety code development and application to fusion safety issues. Most of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Work done for ITER this year has focused on developing the needed information for the Non- Site- Specific Safety Report (NSSR-1). A final area of activity described is development of the new DOE Technical Standards for Safety of Magnetic Fusion Facilities

78 FR 43091 - Technical Operations Safety Action Program (T-SAP) and Air Traffic Safety Action Program (ATSAP)

Science.gov (United States)

2013-07-19

... Administration 14 CFR Part 193 [Docket No.: FAA-2013-0375] Technical Operations Safety Action Program (T-SAP) and... Disclosure. SUMMARY: The FAA is proposing that safety information provided to it under the T-SAP, established... to the FAA under the T-SAP and ATSAP, so the FAA can learn about and address aviation safety hazards...

75 FR 15484 - Railroad Safety Technology Program Grant Program

Science.gov (United States)

2010-03-29

... governments for projects that have a public benefit of improved railroad safety and efficiency. The program... State and local governments for projects * * * that have a public benefit of improved safety and network... minimum 20 percent grantee cost share (cash or in-kind) match requirement. DATES: FRA will begin accepting...

Fast reactor safety program. Progress report, January-March 1980

International Nuclear Information System (INIS)

1980-05-01

The goal of the DOE LMFBR Safety Program is to provide a technology base fully responsive to safety considerations in the design, evaluation, licensing, and economic optimization of LMFBRs for electrical power generation. A strategy is presented that divides safety technology development into seven program elements, which have been used as the basis for the Work Breakdown Structure (WBS) for the Program. These elements include four lines of assurance (LOAs) involving core-related safety considerations, an element supporting non-core-related plant safety considerations, a safety R and D integration element, and an element for the development of test facilities and equipment to be used in Program experiments: LOA-1 (prevent accidents); LOA-2 (limit core damage); LOA-3 (maintain containment integrity); LOA-4 (attenuate radiological consequences); plant considerations; R and D integration; and facility development

Research program on regulatory safety research

International Nuclear Information System (INIS)

Mailaender, R.

2010-02-01

This paper elaborated for the Swiss Federal Office of Energy (SFOE) presents the synthesis report for 2009 made by the SFOE's program leader on the research program concerning regulatory nuclear safety research, as co-ordinated by the Swiss Nuclear Safety Inspectorate ENSI. Work carried out in various areas is reviewed, including that done on reactor safety, radiation protection and waste disposal as well as human aspects, organisation and safety culture. Work done concerning materials, pressure vessel integrity, transient analysis, the analysis of serious accidents in light-water reactors, fuel and material behaviour, melt cooling and concrete interaction is presented. OECD data bank topics are discussed. Transport and waste disposal research at the Mont Terri rock laboratory is looked at. Requirements placed on the personnel employed in nuclear power stations are examined and national and international co-operation is reviewed

High-heat tank safety issue resolution program plan

International Nuclear Information System (INIS)

Wang, O.S.

1993-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank (SST) 241-C-106. This program plan also outlines the logic for selecting approaches and tasks to mitigate and resolve the high-heat safety issue. The identified safety issue for high-heat tank 241-C-106 involves the potential release of nuclear waste to the environment as the result of heat-induced structural damage to the tank's concrete, if forced cooling is interrupted for extended periods. Currently, forced ventilation with added water to promote thermal conductivity and evaporation cooling is used to cool the waste. At this time, the only viable solution identified to resolve this safety issue is the removal of heat generating waste in the tank. This solution is being aggressively pursued as the permanent solution to this safety issue and also to support the present waste retrieval plan. Tank 241-C-106 has been selected as the first SST for retrieval. The program plan has three parts. The first part establishes program objectives and defines safety issues, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. Selected tasks and best-estimate schedules are also summarized in the program plan

IRSN research programs concerning reactor safety

International Nuclear Information System (INIS)

Bardelay, J.

2005-01-01

This paper is made up of 3 parts. The first part briefly presents the missions of IRSN (French research institute on nuclear safety), the second part reviews the research works currently led by IRSN in the following fields : -) the assessment of safety computer codes, -) thermohydraulics, -) reactor ageing, -) reactivity accidents, -) loss of coolant, -) reactor pool dewatering, -) core meltdown, -) vapor explosion, and -) fission product release. In the third part, IRSN is shown to give a major importance to experimental programs led on research or test reactors for collecting valid data because of the complexity of the physical processes that are involved. IRSN plans to develop a research program concerning the safety of high or very high temperature reactors. (A.C.)

A Computer Program for Assessing Nuclear Safety Culture Impact

Energy Technology Data Exchange (ETDEWEB)

Han, Kiyoon; Jae, Moosung [Hanyang Univ., Seoul (Korea, Republic of)

2014-10-15

Through several accidents of NPP including the Fukushima Daiichi in 2011 and Chernobyl accidents in 1986, a lack of safety culture was pointed out as one of the root cause of these accidents. Due to its latent influences on safety performance, safety culture has become an important issue in safety researches. Most of the researches describe how to evaluate the state of the safety culture of the organization. However, they did not include a possibility that the accident occurs due to the lack of safety culture. Because of that, a methodology for evaluating the impact of the safety culture on NPP's safety is required. In this study, the methodology for assessing safety culture impact is suggested and a computer program is developed for its application. SCII model which is the new methodology for assessing safety culture impact quantitatively by using PSA model. The computer program is developed for its application. This program visualizes the SCIs and the SCIIs. It might contribute to comparing the level of the safety culture among NPPs as well as improving the management safety of NPP.

Nuclear criticality safety program at the Fuel Cycle Facility

International Nuclear Information System (INIS)

Lell, R.M.; Fujita, E.K.; Tracy, D.B.; Klann, R.T.; Imel, G.R.; Benedict, R.W.; Rigg, R.H.

1994-01-01

The Fuel Cycle Facility (FCF) is designed to demonstrate the feasibility of a novel commercial-scale remote pyrometallurgical process for metallic fuels from liquid metal-cooled reactors and to show closure of the Integral Fast Reactor (IFR) fuel cycle. Requirements for nuclear criticality safety impose the most restrictive of the various constraints on the operation of FCF. The upper limits on batch sizes and other important process parameters are determined principally by criticality safety considerations. To maintain an efficient operation within appropriate safety limits, it is necessary to formulate a nuclear criticality safety program that integrates equipment design, process development, process modeling, conduct of operations, a measurement program, adequate material control procedures, and nuclear criticality analysis. The nuclear criticality safety program for FCF reflects this integration, ensuring that the facility can be operated efficiently without compromising safety. The experience gained from the conduct of this program in the Fuel cycle Facility will be used to design and safely operate IFR facilities on a commercial scale. The key features of the nuclear criticality safety program are described. The relationship of these features to normal facility operation is also described

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

Science.gov (United States)

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Summary of NRC LWR safety research programs on fuel behavior, metallurgy/materials and operational safety

International Nuclear Information System (INIS)

Bennett, G.L.

1979-09-01

The NRC light-water reactor safety-research program is part of the NRC regulatory program for ensuring the safety of nuclear power plants. This paper summarizes the results of NRC-sponsored research into fuel behavior, metallurgy and materials, and operational safety. The fuel behavior research program provides a detailed understanding of the response of nuclear fuel assemblies to postulated off-normal or accident conditions. Fuel behavior research includes studies of basic fuel rod properties, in-reactor tests, computer code development, fission product release and fuel meltdown. The metallurgy and materials research program provides independent confirmation of the safe design of reactor vessels and piping. This program includes studies on fracture mechanics, irradiation embrittlement, stress corrosion, crack growth, and nondestructive examination. The operational safety research provides direct assistance to NRC officials concerned with the operational and operational-safety aspects of nuclear power plants. The topics currently being addressed include qualification testing evaluation, fire protection, human factors, and noise diagnostics

Mendie, Patrick Johnson

African Journals Online (AJOL)

Mendie, Patrick Johnson. Vol 15, No 2 (2015) - Articles An examination of the nexus between Thomas Hobbes‟ concept of human nature and theory of the state. Abstract. ISSN: 1119-443X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

AEC sets five year nuclear safety research program

International Nuclear Information System (INIS)

Anon.

1976-01-01

The research by the government for the establishment of means of judging the adequacy of safety measures incorporated in nuclear facilities, including setting safety standards and collecting documents of general criteria, and the research by the industry on safety measures and the promotion of safety-related technique are stated in the five year program for 1976-80 reported by subcommittees, Atomic Energy Commission (AEC). Four considerations on the research items incorporated in the program are 1) technical programs relating to the safety of nuclear facilities and the necessary criteria, 2) priority of the relevant items decided according to their impact on circumstances, urgency, the defence-indepth concept and so on, 3) consideration of all relevant data and documents collected, and research subjects necessary to quantify safety measurement, and 4) consideration of technological actualization, the capability of each research body, the budget and the time schedule. In addition, seven major themes decided on the basis of these points are 1) reactivity-initiated accident, 2) LOCA, 3) fuel behavior, 4) structural safety, 5) radioactive release, 6) statistical method of safety evaluation, and 7) seismic characteristics. The committee has deliberated the appropriate division of researches between the government and the industry. A set of tables showing the nuclear safety research plan for 1976-80 are attached. (Iwakiri, K.)

Recent Cases: Administrative Law--Occupational Safety and Health Act

Science.gov (United States)

Harvard Law Review, 1976

1976-01-01

Implications of the Occupational Safety and Health Act of 1970 are described in two cases: Brennan v. Occupational Safety and Health Review Commission (Underhill Construction Corp.), and Anning-Johnson Co. v. United States Occupational Safety and Health Review Commission. (LBH)

Directory of Academic Programs in Occupational Safety and Health.

Science.gov (United States)

Weis, William J., III; And Others

This booklet describes academic program offerings in American colleges and universities in the area of occupational safety and health. Programs are divided into five major categories, corresponding to each of the core disciplines: (1) occupational safety and health/industrial hygiene, (2) occupational safety, (3) industrial hygiene, (4)…

OPG waterways public safety program

Energy Technology Data Exchange (ETDEWEB)

Bennett, T [Ontario Power Generation Inc., Niagara Falls, ON (Canada)

2009-07-01

Ontario Power Generation (OPG) has 64 hydroelectric generating stations, 241 dams, and 109 dams in Ontario's registry with the International Commission on Large Dams (ICOLD). In 1986, it launched a formal dam safety program. This presentation addressed the importance of public safety around dams. The safety measures are timely because of increasing public interaction around dams; the public's unawareness of hazards; public interest in extreme sports; easier access by recreational vehicles; the perceived right of public to access sites; and the remote operation of hydroelectric stations. The presentation outlined the OPG managed system approach, with particular reference to governance; principles; standards and procedures; and aspects of implementation. Specific guidelines and governing documents for public safety around dams were identified, including guidelines for public safety of waterways; booms and buoys; audible warning devices and lights; public safety signage; fencing and barricades; and risk assessment for public safety around waterways. The presentation concluded with a discussion of audits and management reviews to determine if safety objectives and targets have been met. figs.

Cefepime Associated With Phenytoin Induced Stevens-Johnson Syndrome.

Science.gov (United States)

Marco-Del Río, José; Domingo-Chiva, Esther; Cuesta-Montero, Pablo; Valladolid-Walsh, Ana; García-Martínez, Eva María

We describe a recent case of Stevens-Johnson Syndrome. A 49-year-old man was admitted to the Intensive Care Unit of an Anaesthesia and Resuscitation Department because of a Fournier gangrene that derived in a sepsis, ventilator-associated pneumonia, and renal failure. He was under treatment with cefepime and suffered a generalized status epilepticus, so started treatment with phenytoin. The next day he developed a "maculous cutaneous eruption in trunk and lower limbs" compatible with a Stevens-Johnson Syndrome. Stevens-Johnson Syndrome is a very severe and potentially fatal multiorganic disease, especially when present in critically ill patients, with a strong drug-related etiology, especially with antiepileptic drugs.

Fundamentals of a patient safety program

International Nuclear Information System (INIS)

Frush, Karen S.

2008-01-01

Thousands of people are injured or die from medical errors and adverse events each year, despite being cared for by hard-working, intelligent and well-intended health care professionals, working in the highly complex and high-risk environment of the American health care system. Patient safety leaders have described a need for health care organizations to make error prevention a major strategic objective while at the same time recognizing the importance of transforming the traditional health care culture. In response, comprehensive patient safety programs have been developed with the aim of reducing medical errors and adverse events and acting as a catalyst in the development of a culture of safety. Components of these programs are described, with an emphasis on strategies to improve pediatric patient safety. Physicians, as leaders of the health care team, have a unique opportunity to foster the culture and commitment required to address the underlying systems causes of medical error and harm. (orig.)

Fusion Safety Program annual report, fiscal year 1992

International Nuclear Information System (INIS)

Holland, D.F.; Cadwallader, L.C.; Herring, J.S.; Longhurst, G.R.; McCarthy, K.A.; Merrill, B.J.; Piet, S.J.

1993-01-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1992. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and EG ampersand G Idaho, Inc. is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL and in participating organizations including the Westinghouse Hanford Company at the Hanford Engineering Development Laboratory, the Massachusetts Institute of Technology, and the University of Wisconsin. The technical areas covered in the report include tritium safety, activation product release, reactions involving beryllium, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruptions, risk assessment failure rate data base, and computer code development for reactor transients. Also included in the report is a summary of the safety and environmental studies performed by the INEL for the Tokamak Physics Experiments and the Tokamak Fusion Test Reactor, the safety analysis for the International Thermonuclear Experimental Reactor design, and the technical support for the ARIES commercial reactor design study

Response of itchgrass and johnson grass to asulam/dalapon combinations

International Nuclear Information System (INIS)

Hook, B.J.

1986-01-01

Activities of asumlam [methyl[(4-aminophenyl)sulfonyl]carbamate], dalapon (2,2-dichloropropionic acid) and asulam/dalapon combinations on itchgrass (Rottboellia exaltata L.f.) and johnson grass [Sorghum halepense (L.) Pers.] were examined. When metabolism of 14 C-asulam was monitored, seven days after application, 97-100% of recovered 14 C co-chromatographed with 14 C-asulam. Itchgrass exhibited rapid uptake of 14 C-asulam within 8 hr after application. Asumlam concentrations remained constant in the plant between 8 and 72 hr. Johnson grass plants showed a differential response to asulam and asulam/dalapon treatments. Asulam-treated johnson grass absorbed 26-34% 14 C within 2 hr with no future significant increase in absorption in absorption through 72 hr. Treatment of johnson grass with asulam/dalapon enhanced 14 C absorption with time. At 24 and 72 hr 14 C levels were double that absorbed from treatment of asulam alone. Movement of 14 C-asulam in the apoplast and symplast of both itchgrass and johnson grass was noted. The highest radiolabel accumulated in the lower leaves of itchgrass and remained in the treated leaf of johnson grass

49 CFR 659.19 - System safety program plan: contents.

Science.gov (United States)

2010-10-01

... implementation of the system safety program. (j) A description of the process used by the rail transit agency to... the rail transit agency to manage safety issues. (d) The process used to control changes to the system... hazard management program. (n) A description of the process used for facilities and equipment safety...

Diversity: A key aspect of 21st century faculty roles as implemented in the Robert Wood Johnson Foundation Nurse Faculty Scholars program.

Science.gov (United States)

Adams, Linda Thompson; Campbell, Jacquelyn; Deming, Katie

Academic nursing faculty play a vital role in recruiting a diverse student body to increase the diversity of the profession and educate students to provide culturally sensitive care to expand equitable health care. The purpose of the study is to present the Robert Wood Johnson Foundation Nurse Faculty Scholars program diversity initiatives and outcomes. Data on the diversity of the 90 scholars and their diversity-related leadership positions were compiled. Although the program was designed with selection criteria to encourage racial/ethnic and gender diversity, it was not until a diversity strategic plan was designed and implemented that sufficient diversity in the applicant pool and consistent diversity among the scholars was achieved. The program also included highly evaluated leadership content in diversity and inclusion. Lessons learned from the program are important for the assurance of continued diversity among tenure-track nursing faculty, commitment to diversity in the nursing workforce among all faculty, and support in nursing education on providing culturally sensitive nursing care and nursing research that addresses health inequities. Copyright © 2017 Elsevier Inc. All rights reserved.

India's power program and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.

2001-01-01

India's need of electrical power is enormous and per capita consumption of power is to be increased at least by ten times to reach the level of world average. Thermal Power generation faces two fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India's self reliant, three stage, 'closed-fuel-cycle' nuclear power program is promising better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating necessary safety features in the design, operational safety through structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from nuclear power program. Based on latest technology, as available in case of nuclear power option, it is quite possible to meet high energy requirement with least impact on the environment.. (authors)

Japan's international cooperation programs on seismic safety of nuclear power plants

International Nuclear Information System (INIS)

Sanada, Akira

1997-01-01

MITI is promoting many international cooperation programs on nuclear safety area. The seismic safety of nuclear power plants (NPPs) is a one of most important cooperation areas. Experts from MITI and related organization join the multilateral cooperation programs carried out by international organization such as IAEA, OECD/NEA etc. MITI is also promoting bilateral cooperation programs such as information exchange meetings, training programs and seminars on nuclear safety with several countries. Concerning to the cooperation programs on seismic safety of NPPs such as information exchange and training, MITI shall continue and expand these programs. (J.P.N.)

Safety Test Program Summary SNAP 19 Pioneer Heat Source Safety Program

Energy Technology Data Exchange (ETDEWEB)

None,

1971-07-01

Sixteen heat source assemblies have been tested in support of the SNAP 19 Pioneer Safety Test Program. Seven were subjected to simulated reentry heating in various plasma arc facilities followed by impact on earth or granite. Six assemblies were tested under abort accident conditions of overpressure, shrapnel impact, and solid and liquid propellant fires. Three capsules were hot impacted under Transit capsule impact conditions to verify comparability of test results between the two similar capsule designs, thus utilizing both Pioneer and Transit Safety Test results to support the Safety Analysis Report for Pioneer. The tests have shown the fuel is contained under all nominal accident environments with the exception of minor capsule cracks under severe impact and solid fire environments. No catastrophic capsule failures occurred in this test which would release large quantities of fuel. In no test was fuel visible to the eye following impact or fire. Breached capsules were defined as those which exhibit thoria contamination on its surface following a test, or one which exhibited visible cracks in the post test metallographic analyses.

Johnson syndrome in a Nigerian woman with chronic lymphocytic ...

African Journals Online (AJOL)

Stevens-Johnson syndrome is an adverse muco-cutaneous complication arising from a number of conditions which include the administration of some drugs. A female Nigerian with chronic lymphocytic leukaemia, (Binet stage C) who developed Stevens-Johnson syndrome following commencement of allopurinol is ...

The NASA Aviation Safety Program: Overview

Science.gov (United States)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

Johnson Space Center's Risk and Reliability Analysis Group 2008 Annual Report

Science.gov (United States)

Valentine, Mark; Boyer, Roger; Cross, Bob; Hamlin, Teri; Roelant, Henk; Stewart, Mike; Bigler, Mark; Winter, Scott; Reistle, Bruce; Heydorn,Dick

2009-01-01

The Johnson Space Center (JSC) Safety & Mission Assurance (S&MA) Directorate s Risk and Reliability Analysis Group provides both mathematical and engineering analysis expertise in the areas of Probabilistic Risk Assessment (PRA), Reliability and Maintainability (R&M) analysis, and data collection and analysis. The fundamental goal of this group is to provide National Aeronautics and Space Administration (NASA) decisionmakers with the necessary information to make informed decisions when evaluating personnel, flight hardware, and public safety concerns associated with current operating systems as well as with any future systems. The Analysis Group includes a staff of statistical and reliability experts with valuable backgrounds in the statistical, reliability, and engineering fields. This group includes JSC S&MA Analysis Branch personnel as well as S&MA support services contractors, such as Science Applications International Corporation (SAIC) and SoHaR. The Analysis Group s experience base includes nuclear power (both commercial and navy), manufacturing, Department of Defense, chemical, and shipping industries, as well as significant aerospace experience specifically in the Shuttle, International Space Station (ISS), and Constellation Programs. The Analysis Group partners with project and program offices, other NASA centers, NASA contractors, and universities to provide additional resources or information to the group when performing various analysis tasks. The JSC S&MA Analysis Group is recognized as a leader in risk and reliability analysis within the NASA community. Therefore, the Analysis Group is in high demand to help the Space Shuttle Program (SSP) continue to fly safely, assist in designing the next generation spacecraft for the Constellation Program (CxP), and promote advanced analytical techniques. The Analysis Section s tasks include teaching classes and instituting personnel qualification processes to enhance the professional abilities of our analysts

Lyndon B. Johnson and the Civil Right Act of 1964

Directory of Open Access Journals (Sweden)

Karatzas Konstantinos D.

2016-09-01

Full Text Available The Civil Rights Movement is deeply intertwined with Lyndon B. Johnson. Throughout his career, Johnson supported the quest of African-Americans for political and civil rights. They found in him an ally whose role was fundamental in fullfilling the goals of Martin Luther King, Jr, and the Civil Rights Movement. This paper will examine the role of the Johnson presidency in the passage of the Civil Rights Acts of 1957 and 1964.

Survey, applications, and prospects of Johnson noise thermometry

International Nuclear Information System (INIS)

Blalock, T.V.; Shepard, R.L.

1981-01-01

Significant progress in the field of Johnson noise thermometry has occurred since the 1971 survey of Kamper. This paper will review the foundation work of Johnson noise thermometry, survey the basic methods which do not utilize quantum devices for noise thermometry for industrial temperatures, and present some applications of noise thermometry in temperature scale metrology and process temperature instrumentation. 35 references

German Light-Water-Reactor Safety-Research Program

International Nuclear Information System (INIS)

Seipel, H.G.; Lummerzheim, D.; Rittig, D.

1977-01-01

The Light-Water-Reactor Safety-Research Program, which is part of the energy program of the Federal Republic of Germany, is presented in this article. The program, for which the Federal Minister of Research and Technology of the Federal Republic of Germany is responsible, is subdivided into the following four main problem areas, which in turn are subdivided into projects: (1) improvement of the operational safety and reliability of systems and components (projects: quality assurance, component safety); (2) analysis of the consequences of accidents (projects: emergency core cooling, containment, external impacts, pressure-vessel failure, core meltdown); (3) analysis of radiation exposure during operation, accident, and decommissioning (project: fission-product transport and radiation exposure); and (4) analysis of the risk created by the operation of nuclear power plants (project: risk and reliability). Various problems, which are included in the above-mentioned projects, are concurrently studied within the Heiss-Dampf Reaktor experiments

76 FR 74723 - New Car Assessment Program (NCAP); Safety Labeling

Science.gov (United States)

2011-12-01

... [Docket No. NHTSA 2010-0025] RIN 2127-AK51 New Car Assessment Program (NCAP); Safety Labeling AGENCY... NHTSA's regulation on vehicle labeling of safety rating information to reflect the enhanced NCAP ratings... Traffic Safety Administration under the enhanced NCAP testing and rating program. * * * * * (e) * * * (4...

Probabilistic Analysis for Comparing Fatigue Data Based on Johnson-Weibull Parameters

Science.gov (United States)

Vlcek, Brian L.; Hendricks, Robert C.; Zaretsky, Erwin V.

2013-01-01

Leonard Johnson published a methodology for establishing the confidence that two populations of data are different. Johnson's methodology is dependent on limited combinations of test parameters (Weibull slope, mean life ratio, and degrees of freedom) and a set of complex mathematical equations. In this report, a simplified algebraic equation for confidence numbers is derived based on the original work of Johnson. The confidence numbers calculated with this equation are compared to those obtained graphically by Johnson. Using the ratios of mean life, the resultant values of confidence numbers at the 99 percent level deviate less than 1 percent from those of Johnson. At a 90 percent confidence level, the calculated values differ between +2 and 4 percent. The simplified equation is used to rank the experimental lives of three aluminum alloys (AL 2024, AL 6061, and AL 7075), each tested at three stress levels in rotating beam fatigue, analyzed using the Johnson- Weibull method, and compared to the ASTM Standard (E739 91) method of comparison. The ASTM Standard did not statistically distinguish between AL 6061 and AL 7075. However, it is possible to rank the fatigue lives of different materials with a reasonable degree of statistical certainty based on combined confidence numbers using the Johnson- Weibull analysis. AL 2024 was found to have the longest fatigue life, followed by AL 7075, and then AL 6061. The ASTM Standard and the Johnson-Weibull analysis result in the same stress-life exponent p for each of the three aluminum alloys at the median, or L(sub 50), lives

Co-amoxiclav-induced Stevens Johnson Syndrome in a child ...

African Journals Online (AJOL)

Stevens-Johnson Syndrome is an uncommon life threatening disease generally induced by drugs. Antibiotics, mainly sulphonamides, are the most involved drugs in Stevens-Johnson Syndrome in children. Co-amoxiclav is a well tolerated antibiotic. It has never been reported to cause, lonely this syndrome in children.

Safety guidance and inspection program for particle accelerator

Energy Technology Data Exchange (ETDEWEB)

Lee, Do Whey [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Lee, Hee Seock; Yeo, In Whan [Pohang Accelerator Laboratory, Pohang (Korea, Republic of)] (and others)

2001-03-15

The inspection program and the safety guidance were developed to enhance the radiation protection for the use of particle accelerators. First the classification of particle accelerators was conducted to develop the safety inspection protocol efficiently. The status of particle accelerators which were operated at the inside and outside of the country, and their safety programs were surveyed. The characteristics of radiation production was researched for each type of particle accelerators. Two research teams were launched for industrial and research accelerators and for medical accelerators, respectively. In each stages of a design, a fabrication, an installation, a commissioning, and normal operation of accelerators, those safety inspection protocols were developed. Because all protocols resulted from employing safety experts, doing the questionnaire, and direct facility surveys, it can be applicable to present safety problem directly. The detail improvement concepts were proposed to revise the domestic safety rule. This results might also be useful as a practical guidance for the radiation safety officer of an accelerator facility, and as the detail standard for the governmental inspection authorities.

India's power programs and its concern over environmental safety

International Nuclear Information System (INIS)

Prasad, G.E.; Mittra, J.; Sarma, M.S.R.

2000-01-01

India's need for electrical power is enormous and per capita consumption of power is to be increased at least by 10 times to reach the level of the world average. Thermal power generation faces two-fold problems. First, there is scarcity of good quality fuel and second, increasing environmental pollution. India 's self reliant, . three stage, 'closed-fuel-cycle' nuclear power program is promising a better solution to the above problems. To ensure Radiation Protection and Safety of Radiation Sources, the Indian Nuclear Power program emphasizes upon design and engineering safety by incorporating' necessary safety features in the design, operational safety through a structured training program and typically through software packages to handle rare unsafe events and regulation by complying safety directives. A health survey among the radiation workers indicates that there is no extra threat to the public from the nuclear power program. Based on the latest technology, as available in case of the nuclear power option, it is quite possible to meet high energy requirements with least impact on the environment. (authors)

EPRI program in water reactor safety

International Nuclear Information System (INIS)

Loewenstein, W.B.; Gelhaus, F.; Gopalakrishnan, A.

1975-01-01

The basis for EPRI's water reactor safety program is twofold. First is compilation and development of fundamental background data necessary for quantified light-water reactor (LWR) safety assurance appraisals. Second is development of realistic and experimentally bench-marked analytical procedures. The results are expected either to confirm the safety margins in current operating parameters, and to identify overly conservative controls, or, in some cases, to provide a basis for improvements to further minimize uncertainties in expected performance. Achievement of these objectives requires the synthesis of related current and projected experimental-analytical projects toward establishment of an experimentally-based analysis for the assurance of safety for LWRs

Safety in the Chemical Laboratory: Safety in the Chemistry Laboratories: A Specific Program.

Science.gov (United States)

Corkern, Walter H.; Munchausen, Linda L.

1983-01-01

Describes a safety program adopted by Southeastern Louisiana University. Students are given detailed instructions on laboratory safety during the first laboratory period and a test which must be completely correct before they are allowed to return to the laboratory. Test questions, list of safety rules, and a laboratory accident report form are…

HTGR safety research program

International Nuclear Information System (INIS)

Barsell, A.W.; Olsen, B.E.; Silady, F.A.

1981-01-01

An HTGR safety research program is being performed supporting and guided in priorities by the AIPA Probabilistic Risk Study. Analytical and experimental studies have been conducted in four general areas where modeling or data assumptions contribute to large uncertainties in the consequence assessments and thus, in the risk assessment for key core heat-up accident scenarios. Experimental data have been obtained on time-dependent release of fission products from the fuel particles, and plateout characteristics of condensible fission products in the primary circuit. Potential failure modes of primarily top head PCRV components as well as concrete degradation processes have been analyzed using a series of newly developed models and interlinked computer programs. Containment phenomena, including fission product deposition and potential flammability of liberated combustible gases have been studied analytically. Lastly, the behaviour of boron control material in the core and reactor subcriticality during core heatup have been examined analytically. Research in these areas has formed the basis for consequence updates in GA-A15000. Systematic derivation of future safety research priorities is also discussed. (author)

Analysis of School Food Safety Programs Based on HACCP Principles

Science.gov (United States)

Roberts, Kevin R.; Sauer, Kevin; Sneed, Jeannie; Kwon, Junehee; Olds, David; Cole, Kerri; Shanklin, Carol

2014-01-01

Purpose/Objectives: The purpose of this study was to determine how school districts have implemented food safety programs based on HACCP principles. Specific objectives included: (1) Evaluate how schools are implementing components of food safety programs; and (2) Determine foodservice employees food-handling practices related to food safety.…

Development of a safety communication and recognition program for construction.

Science.gov (United States)

Sparer, Emily H; Herrick, Robert F; Dennerlein, Jack T

2015-05-01

Leading-indicator-based (e.g., hazard recognition) incentive programs provide an alternative to controversial lagging-indicator-based (e.g., injury rates) programs. We designed a leading-indicator-based safety communication and recognition program that incentivized safe working conditions. The program was piloted for two months on a commercial construction worksite and then redesigned using qualitative interview and focus group data from management and workers. We then ran the redesigned program for six months on the same worksite. Foremen received detailed weekly feedback from safety inspections, and posters displayed worksite and subcontractor safety scores. In the final program design, the whole site, not individual subcontractors, was the unit of analysis and recognition. This received high levels of acceptance from workers, who noted increased levels of site unity and team-building. This pilot program showed that construction workers value solidarity with others on site, demonstrating the importance of health and safety programs that engage all workers through a reliable and consistent communication infrastructure. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Fusion Safety Program. Annual report, FY 1982

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1983-07-01

The Fusion Safety Program major activities for Fiscal Year 1982 are summarized in this report. The program was started in FY-79, with the Idaho National Engineering Laboratory (INEL) designated as lead laboratory and EG and G Idaho, Inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., Activities at INEL includes major portions of papers dealing with ongoing work in tritium implantation experiments, tritium risk assessment, transient code development, heat transfer and fluid flow analysis, and high temperature oxidation and mobilization of structural material experiments. The section Outside Contracts includes studies of superconducting magnet safety conducted by Argonne National Laboratory, experiments concerning superconductor safety issues performed by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety and environmental studies by MIT, a summary of lithium safety experiments at Hanford Engineering Development Laboratory, and the results of tritium gas conversion to oxide experiments at Oak Ridge National Laboratory. A List of Publications and Proposed FY-83 Activities are also presented

29 CFR 1960.12 - Dissemination of occupational safety and health program information.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Dissemination of occupational safety and health program... OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Administration § 1960.12 Dissemination of occupational safety and health program information. (a) Copies of the Act, Executive Order 12196, program...

Johnson-Wax Mijdrecht (Holanda

Directory of Open Access Journals (Sweden)

Maaskant van Dommelen Kroos, Arquitectos

1972-09-01

Full Text Available This Johnson factory, ideally located in the industrial zone of Mijdrecht, is an original building in both its design and its position on a lake which acts as a reflector. The set of offices is divided into three parts, taking into account that it has to function as a centre of international sales as well. Its special shape is perfectly suitable for future development, conditioned to the construction of a new adjacent road.Situada en la zona industrial de Mijdrecht, óptima por su emplazamiento, esta fábrica de la casa Johnson es un edificio original por su especial diseño y por su ubicación sobre un estanque, que actúa de elemento reflector. El conjunto de oficinas está dividido en tres partes, teniendo en cuenta que, además, ha de funcionar como centro de ventas internacional. Asimismo, su especial configuración está perfectamente adaptada a un futuro plan de ampliación de las instalaciones, condicionado a la construcción de una nueva carretera adyacente.

Safety Culture Perceptions in a Collegiate Aviation Program: A Systematic Assessment

OpenAIRE

Adjekum, Daniel Kwasi

2014-01-01

An assessment of the perceptions of respondents on the safety culture at an accredited Part 141 four year collegiate aviation program was conducted as part of the implementation of a safety management system (SMS). The Collegiate Aviation Program Safety Culture Assessment Survey (CAPSCAS), which was modified and revalidated from the existing Commercial Aviation Safety Survey (CASS), was used. Participants were drawn from flight students and certified flight instructors in the program. The sur...

Application of the Johnson criteria to graphene transistors

International Nuclear Information System (INIS)

Kelly, M J

2013-01-01

For 60 years, the Johnson criteria have guided the development of materials and the materials choices for field-effect and bipolar transistor technology. Intrinsic graphene is a semi-metal, precluding transistor applications, but only under lateral bias is a gap opened and transistor action possible. This first application of the Johnson criteria to biased graphene suggests that this material will struggle to ever achieve competitive commercial applications. (fast track communication)

Effective radiological safety program for electron linear accelerators

International Nuclear Information System (INIS)

Swanson, W.P.

1980-10-01

An outline is presented of some of the main elements of an electron accelerator radiological safety program. The discussion includes types of accelerator facilities, types of radiations to be anticipated, activity induced in components, air and water, and production of toxic gases. Concepts of radiation shielding design are briefly discussed and organizational aspects are considered as an integral part of the overall safety program

41 CFR 128-1.8006 - Seismic Safety Program requirements.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic Safety Program requirements. 128-1.8006 Section 128-1.8006 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Fusion Safety Program annual report, Fiscal Year 1993

International Nuclear Information System (INIS)

Longhurst, G.R.; Cadwallader, L.C.; Dolan, T.J.; Herring, J.S.; McCarthy, K.A.; Merrill, B.J.; Motloch, C.G.; Petti, D.A.

1993-12-01

This report summarizes the major activities of the Fusion Safety Program in Fiscal Year 1993. The Idaho National Engineering Laboratory (INEL) has been designated by DOE as the lead laboratory for fusion safety, and EG ampersand G Idaho, Inc., is the prime contractor for INEL operations. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL and in participating organizations, including universities and private companies. Technical areas covered in the report include tritium safety, beryllium safety, activation product release, reactions involving potential plasma-facing materials, safety of fusion magnet systems, plasma disruptions and edge physics modeling, risk assessment failure rates, computer codes for reactor transient analysis, and regulatory support. These areas include work completed in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed at the INEL for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor projects at the Princeton Plasma Physics Laboratory and a summary of the technical support for the ARIES/PULSAR commercial reactor design studies

Implementation of a patient safety program at a tertiary health system: A longitudinal analysis of interventions and serious safety events.

Science.gov (United States)

Cropper, Douglas P; Harb, Nidal H; Said, Patricia A; Lemke, Jon H; Shammas, Nicolas W

2018-04-01

We hypothesize that implementation of a safety program based on high reliability organization principles will reduce serious safety events (SSE). The safety program focused on 7 essential elements: (a) safety rounding, (b) safety oversight teams, (c) safety huddles, (d) safety coaches, (e) good catches/safety heroes, (f) safety education, and (g) red rule. An educational curriculum was implemented focusing on changing high-risk behaviors and implementing critical safety policies. All unusual occurrences were captured in the Midas system and investigated by risk specialists, the safety officer, and the chief medical officer. A multidepartmental committee evaluated these events, and a root cause analysis (RCA) was performed. Events were tabulated and serious safety event (SSE) recorded and plotted over time. Safety success stories (SSSs) were also evaluated over time. A steady drop in SSEs was seen over 9 years. Also a rise in SSSs was evident, reflecting on staff engagement in the program. The parallel change in SSEs, SSSs, and the implementation of various safety interventions highly suggest that the program was successful in achieving its goals. A safety program based on high-reliability organization principles and made a core value of the institution can have a significant positive impact on reducing SSEs. © 2018 American Society for Healthcare Risk Management of the American Hospital Association.

MORT: a safety management program developed for ERDA

International Nuclear Information System (INIS)

1977-03-01

ERDA's System Safety Development Center (SSDC) is located at the Idaho National Engineering Laboratory under the EG and G Idaho, Inc., contract administered by the Idaho Operations Office. The SSDC performs a variety of tasks for ERDA's Division of Safety, Standards, and Compliance, for the purpose of improvement and application of safety program elements. Primary among these tasks are development and demonstration of new methodologies, training, consultation, and technical writing. This information package (ERDA 77-38) is an example of the later task, aimed at communicating to a general audience the nature and purpose of major features of the Management Oversight and Risk Tree (MORT) program. The SSDC also originates a guideline series of monographs (the ERDA 76-45 series) for individuals who desire more specific explanations of the MORT program

Nuclear Criticality Safety Organization qualification program. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSO technical and managerial qualification as required by the Y-12 Training Implementation Matrix (TIM). It is implemented through a combination of LMES plant-wide training courses and professional nuclear criticality safety training provided within the organization. This Qualification Program is applicable to technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who perform the NCS tasks or serve NCS-related positions as defined in sections 5 and 6 of this program

Nuclear criticality safety specialist training and qualification programs

International Nuclear Information System (INIS)

Hopper, C.M.

1993-01-01

Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

Engineering and Safety Partnership Enhances Safety of the Space Shuttle Program (SSP)

Science.gov (United States)

Duarte, Alberto

2007-01-01

Project Management must use the risk assessment documents (RADs) as tools to support their decision making process. Therefore, these documents have to be initiated, developed, and evolved parallel to the life of the project. Technical preparation and safety compliance of these documents require a great deal of resources. Updating these documents after-the-fact not only requires substantial increase in resources - Project Cost -, but this task is also not useful and perhaps an unnecessary expense. Hazard Reports (HRs), Failure Modes and Effects Analysis (FMEAs), Critical Item Lists (CILs), Risk Management process are, among others, within this category. A positive action resulting from a strong partnership between interested parties is one way to get these documents and related processes and requirements, released and updated in useful time. The Space Shuttle Program (SSP) at the Marshall Space Flight Center has implemented a process which is having positive results and gaining acceptance within the Agency. A hybrid Panel, with equal interest and responsibilities for the two larger organizations, Safety and Engineering, is the focal point of this process. Called the Marshall Safety and Engineering Review Panel (MSERP), its charter (Space Shuttle Program Directive 110 F, April 15, 2005), and its Operating Control Plan emphasizes the technical and safety responsibilities over the program risk documents: HRs; FMEA/CILs; Engineering Changes; anomalies/problem resolutions and corrective action implementations, and trend analysis. The MSERP has undertaken its responsibilities with objectivity, assertiveness, dedication, has operated with focus, and has shown significant results and promising perspectives. The MSERP has been deeply involved in propulsion systems and integration, real time technical issues and other relevant reviews, since its conception. These activities have transformed the propulsion MSERP in a truly participative and value added panel, making a

Japan`s international cooperation programs on seismic safety of nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Sanada, Akira [Agency of Natural Resources and Energy, Tokyo (Japan)

1997-03-01

MITI is promoting many international cooperation programs on nuclear safety area. The seismic safety of nuclear power plants (NPPs) is a one of most important cooperation areas. Experts from MITI and related organization join the multilateral cooperation programs carried out by international organization such as IAEA, OECD/NEA etc. MITI is also promoting bilateral cooperation programs such as information exchange meetings, training programs and seminars on nuclear safety with several countries. Concerning to the cooperation programs on seismic safety of NPPs such as information exchange and training, MITI shall continue and expand these programs. (J.P.N.)

TRACES OF JOHNSON IN THE LANGUAGE OF FANNY BURNEY

Directory of Open Access Journals (Sweden)

Randy Bax

2005-06-01

Full Text Available It has often been claimed that Frances Burney (1752-1840 was influenced linguistically by Samuel Johnson (1709-1784. Sorensen (1969: 390, and others with him, have even called her a "slavish imitator" of the language which Johnson used in his Rambler essays. Although far from simple guesswork, quantitative studies such as Sorensen's remain impressionistic, which makes it difficult to incorporate his (and similar observations in quantitative socio-histoncal linguistic studies of the English language. In the present study, the question whether Burney was indeed a serious imitator of Johnson's usage is answered by looking at the problem from a quantitative rather than qualitative perspective, and addressed within the framework of histoncai social network analysis.

Safety implications of standardized continuous quality improvement programs in community pharmacy.

Science.gov (United States)

Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

2013-06-01

Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

Safety and economic impacts of photo radar program.

Science.gov (United States)

Chen, Greg

2005-12-01

Unsafe speed is one of the major traffic safety challenges facing motorized nations. In 2003, unsafe speed contributed to 31 percent of all fatal collisions, causing a loss of 13,380 lives in the United States alone. The economic impact of speeding is tremendous. According to NHTSA, the cost of unsafe speed related collisions to the American society exceeds 40 billion US dollars per year. In response, automated photo radar speed enforcement programs have been implemented in many countries. This study assesses the economic impacts of a large-scale photo radar program in British Columbia. The knowledge generated from this study could inform policy makers and project managers in making informed decisions with regard to this highly effective and efficient, yet very controversial program. This study establishes speed and safety effects of photo radar programs by summarizing two physical impact investigations in British Columbia. It then conducts a cost-benefit analysis to assess the program's economic impacts. The cost-benefit analysis takes into account both societal and funding agency's perspectives. It includes a comprehensive account of major impacts. It uses willingness to pay principle to value human lives saved and injuries avoided. It incorporates an extended sensitivity analysis to quantify the robustness of base case conclusions. The study reveals an annual net benefit of approximately 114 million in year 2001 Canadian dollars to British Columbians. The study also finds a net annual saving of over 38 million Canadian dollars for the Insurance Corporation of British Columbia (ICBC) that funded the program. These results are robust under almost all alternative scenarios tested. The only circumstance under which the net benefit of the program turns negative is when the real safety effects were one standard deviation below the estimated values, which is possible but highly unlikely. Automated photo radar traffic safety enforcement can be an effective and efficient

Developing an integrated dam safety program

International Nuclear Information System (INIS)

Nielsen, N. M.; Lampa, J.

1996-01-01

An effort has been made to demonstrate that dam safety is an integral part of asset management which, when properly done, ensures that all objectives relating to safety and compliance, profitability, stakeholders' expectations and customer satisfaction, are achieved. The means to achieving this integration of the dam safety program and the level of effort required for each core function have been identified using the risk management approach to pinpoint vulnerabilities, and subsequently to focus priorities. The process is considered appropriate for any combination of numbers, sizes and uses of dams, and is designed to prevent exposure to unacceptable risks. 5 refs., 1 tab

Grouting of the cracks in the Arch 5-6 Daniel Johnson dam

International Nuclear Information System (INIS)

Lariviere, R.; Routhier, L.; Roy, V.; Saleh, K.; Tremblay, S.

1999-01-01

The Daniel-Johnson dam is located 800 km northeast of Montreal, PQ, and is 1314 m in length and 214 m high. Just after completion of dam construction different types of cracks started to appear on the upstream and downstream faces. During and after the construction of the dam, numerous cracks and joints were grouted in order to reduce water infiltration. In some cases, as a result of high injection pressures and inaccurate methods, the injections provoked the propagation of the existing cracks or the initiation of new ones. Because of this situation and to determine the contribution of injection to dam safety, in 1985, Hydro-Quebec applied a moratorium on all future injection work on the dam. Research work was initiated in 1986 in the areas of grouting materials, methods, equipment and behavioral analysis to establish a safe method for the injection of the cracks. A committee was formed in 1993 with members from various groups, in order to: carry out extensive behavioral analysis of the Arch 5-6 dam, carry out an investigation program in order to determine the cause of the increase of the water infiltration, undertake a structural analysis program in order to evaluate the impact of an injection on the safety of the dam, and identify the proper method and injection products to use. In 1997, as a result of the progress of the structural analysis studies and the injection research project, a decision was made to proceed with the injection of the dam. A description is included of the results of the investigation, recommendations and results of the injection research project, as well as some details of the grouting campaign carried out in January 1999. On the whole, a better knowledge was acquired of the structure, of the plunging cracks and the behaviour of the dam during the injection. In the field of injection methods, materials and equipment, research work was invaluable when it came to the injection of micro-fine cracks in concrete dams. 5 refs., 8 figs

Research and development program in reactor safety for NUCLEBRAS

International Nuclear Information System (INIS)

Pinheiro, R.B.; Resende Lobo, A.A. de; Horta, J.A.L.; Avelar Esteves, F. de; Lepecki, W.P.S.; Mohr, K.; Selvatici, E.

1984-01-01

With technical assistance from the IAEA, it was established recently an analytical and experimental Research and Development Program for NUCLEBRAS in the area of reactor safety. The main objectives of this program is to make possible, with low investments, the active participation of NUCLEBRAS in international PWR safety research. The analytical and experimental activities of the program are described with some detail, and the main results achieved up to now are presented. (Author) [pt

Status and Monitoring of Natural and Supplemented Chinook Salmon in Johnson Creek, Idaho, 2006-2007 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Rabe, Craig D.; Nelson, Douglas D. [Nez Perce Tribe

2008-11-17

The Nez Perce Tribe Johnson Creek Artificial Propagation Enhancement Project (JCAPE) has conducted juvenile and adult monitoring and evaluation studies for its 10th consecutive year. Completion of adult and juvenile Chinook salmon studies were conducted for the purpose of evaluating a small-scale production initiative designed to increase the survival of a weak but recoverable spawning aggregate of summer Chinook salmon Oncorhynchus tshawytscha. The JCAPE program evaluates the life cycle of natural origin (NOR) and hatchery origin (HOR) supplementation fish to quantify the key performance measures: abundance, survival-productivity, distribution, genetics, life history, habitat, and in-hatchery metrics. Operation of a picket style weir and intensive multiple spawning ground surveys were completed to monitor adult Chinook salmon and a rotary screw trap was used to monitor migrating juvenile Chinook salmon in Johnson Creek. In 2007, spawning ground surveys were conducted on all available spawning habitat in Johnson Creek and one of its tributaries. A total of 63 redds were observed in the index reach and 11 redds for all other reaches for a combined count of 74 redds. Utilization of carcass recovery surveys and adult captures at an adult picket weir yielded a total estimated adult escapement to Johnson Creek of 438 Chinook salmon. Upon deducting fish removed for broodstock (n=52), weir mortality/ known strays (n=12), and prespawning mortality (n=15), an estimated 359 summer Chinook salmon were available to spawn. Estimated total migration of brood year 2005 NOR juvenile Chinook salmon at the rotary screw trap was calculated for three seasons (summer, fall, and spring). The total estimated migration was 34,194 fish; 26,671 of the NOR migrants left in the summer (July 1 to August 31, 2005) as fry/parr, 5,852 left in the fall (September 1 to November 21, 2005) as presmolt, and only 1,671 NOR fish left in the spring (March 1 to June 30, 2006) as smolt. In addition, there

The Nordic safety program on accident consequence assessment

International Nuclear Information System (INIS)

Tveten, U.

1988-01-01

One important part of Nordic cooperation is partially funded by the Nordic Council of Ministers, namely the work performed within the Nordic Safety Program (often referred to as the NKA projects). NKA is the Nordic abbreviation of the Nordic Liaison Committee on Atomic Energy. One program area in the present four-year period is concerned with problems related to reactor accident consequence assessment, and contains almost twenty projects covering a wide range of subjects. The author is program coordinator for this program area. The program will be completed in 1989. The program was strongly influenced by Chernobyl, and a number of new projects were included in the program in 1986. Involved in the program are these Nordic institutions: Riso National Laboratory (Denmark). Technical Research Centre of Finland. Finnish Centre for Radiation and Nuclear Safety. Finnish Meteorological Institute. Institute for Energy Technology (Norway). Agricultural University of Norway. Meteorological Institute of Norway. Studsvik Energiteknik AB (Sweden). National Defence Research Laboratory (Sweden)

Systems Analysis of NASA Aviation Safety Program: Final Report

Science.gov (United States)

Jones, Sharon M.; Reveley, Mary S.; Withrow, Colleen A.; Evans, Joni K.; Barr, Lawrence; Leone, Karen

2013-01-01

A three-month study (February to April 2010) of the NASA Aviation Safety (AvSafe) program was conducted. This study comprised three components: (1) a statistical analysis of currently available civilian subsonic aircraft data from the National Transportation Safety Board (NTSB), the Federal Aviation Administration (FAA), and the Aviation Safety Information Analysis and Sharing (ASIAS) system to identify any significant or overlooked aviation safety issues; (2) a high-level qualitative identification of future safety risks, with an assessment of the potential impact of the NASA AvSafe research on the National Airspace System (NAS) based on these risks; and (3) a detailed, top-down analysis of the NASA AvSafe program using an established and peer-reviewed systems analysis methodology. The statistical analysis identified the top aviation "tall poles" based on NTSB accident and FAA incident data from 1997 to 2006. A separate examination of medical helicopter accidents in the United States was also conducted. Multiple external sources were used to develop a compilation of ten "tall poles" in future safety issues/risks. The top-down analysis of the AvSafe was conducted by using a modification of the Gibson methodology. Of the 17 challenging safety issues that were identified, 11 were directly addressed by the AvSafe program research portfolio.

Management of radioactive material safety programs at medical facilities. Final report

International Nuclear Information System (INIS)

Camper, L.W.; Schlueter, J.; Woods, S.

1997-05-01

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution's executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized users and supervised individuals; NRC's reporting and notification requirements are discussed, and a general description is given of how NRC's licensing, inspection and enforcement programs work

29 CFR 1960.80 - Secretary's evaluations of agency occupational safety and health programs.

Science.gov (United States)

2010-07-01

... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs § 1960.80 Secretary's evaluations of agency occupational safety and health... evaluating an agency's occupational safety and health program. To accomplish this, the Secretary shall...

Fusion Safety Program annual report: Fiscal year 1987

International Nuclear Information System (INIS)

Holland, D.F.; Herring, J.S.; Longhurst, G.R.; Lyon, R.E.; Merrill, B.J.; Piet, S.J.

1988-02-01

This report summarizes the Fusion Safety Program major activities in fiscal year 1987. The Idaho National Engineering Laboratory (INEL) is the designated lead laboraotry and EG and G Idaho, Inc., is the prime contractor for this program, which was initiated in 1979. Activities are conducted at the INEL and in participating laboratories including the Hanford Engineering Development Laboratory (HEDL), the Massachusetts Institute of Technology (MIT), and the University of Wisconsin. The technical areas covered in the report include tritium safety, activation product release, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruptions, risk assessment methodology, computer codes development for reactor transients, and fusion waste management. Also included in the report is a summary of the safety and environmental analysis and conventional facilities design performed by INEL for the Compact Ignition Tokamak design project, the safety analysis and documentation performed for the Tokamak Ignition/Burn Experimental Reactor design, and the technical support provided to the Environmental Safety and Economics Committee (ESECOM). 42 refs., 17 figs., 4 tabs

JOHNSON-MATTHEY DIFFUSER CHARACTERIZATION TESTING

International Nuclear Information System (INIS)

Foster, P; James Klein, J; Henry Sessions, H; Gregg Morgan, G

2007-01-01

A diffuser/permeator commercially fabricated by Johnson-Matthey was purchased for characterization testing at the Savannah River National Laboratory (SRNL). A test system was fabricated to not only feed and bleed flows and pressures, but also permeate pressure for flows up to 20 SLPM

Survey on Johnson noise thermometry for temperature instrumentation

International Nuclear Information System (INIS)

Hwang, I. K.; Kim, Y. K.; Kim, J. S.; Moon, B. S.

2002-01-01

Johnson Noise Thermometry is an drift-free temperature measurement method which is able to maintain the best accuracy without calibration for a long period. Resistance Temperature Detectors (RTDs) and Thermocouples used widely in power plants have the drift problem which causes a measurement error. Despite the advantage of Johnson Noise thermometry, it has not been used because it is very sensitive to electromagnetic noise and environment. It also requires more complicated signal processing methods. This paper presents the characteristics of Johnson Noise thermometry and various implementation method proposed over the past decades time period. The key factor in development of a noise thermometer is how to extract the tiny noise signal from the sensor and discriminate out the unnecessary noise interference from the environments. The new digital technology of fast signal processing skill will useful to challenge the existing problems fir commercialization of noise thermometry

High-heat tank safety issue resolution program plan. Revision 2

International Nuclear Information System (INIS)

Wang, O.S.

1994-12-01

The purpose of this program plan is to provide a guide for selecting corrective actions that will mitigate and/or remediate the high-heat waste tank safety issue for single-shell tank 241-C-106. The heat source of approximately 110,000 Btu/hr is the radioactive decay of the stored waste material (primarily 90 Sr) inadvertently transferred into the tank in the later 1960s. Currently, forced ventilation, with added water to promote thermal conductivity and evaporation cooling, is used for heat removal. The method is very effective and economical. At this time, the only viable solution identified to permanently resolve this safety issue is the removal of heat-generating waste in the tank. This solution is being aggressively pursued as the only remediation method to this safety issue, and tank 241-C-106 has been selected as the first single-shell tank for retrieval. The current cooling method and other alternatives are addressed in this program as means to mitigate this safety issue before retrieval. This program plan has three parts. The first part establishes program objectives and defines safety issue, drivers, and resolution criteria and strategy. The second part evaluates the high-heat safety issue and its mitigation and remediation methods and other alternatives according to resolution logic. The third part identifies major tasks and alternatives for mitigation and resolution of the safety issue. A table of best-estimate schedules for the key tasks is also included in this program plan

29 CFR 1960.79 - Self-evaluations of occupational safety and health programs.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Self-evaluations of occupational safety and health programs. 1960.79 Section 1960.79 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... AND HEALTH PROGRAMS AND RELATED MATTERS Evaluation of Federal Occupational Safety and Health Programs...

Mycoplasma pneumoniae and atypical Stevens-Johnson syndrome: a case series.

Science.gov (United States)

Ravin, Karen A; Rappaport, Lara D; Zuckerbraun, Noel S; Wadowsky, Robert M; Wald, Ellen R; Michaels, Marian M

2007-04-01

Mycoplasma pneumoniae is a common cause of community-acquired respiratory illness in the adolescent population. Stevens-Johnson syndrome is an extrapulmonary manifestation that has been associated with M. pneumoniae infections. Three adolescent males presented within a 1-month period with M. pneumoniae respiratory illnesses and severe mucositis but without the classic rash typical of Stevens-Johnson. Diagnosis was facilitated by the use of a polymerase chain reaction-based assay. This case series highlights the potential for M. pneumoniae-associated Stevens-Johnson syndrome to occur without rash and supports the use of polymerase chain reaction for early diagnosis.

A program approach for site safety at oil spills

International Nuclear Information System (INIS)

Whipple, F.L.; Glenn, S.P.; Ocken, J.J.; Ott, G.L.

1993-01-01

When OSHA developed the hazardous waste operations (Hazwoper) regulations (29 CFR 1910.120) members of the response community envisioned a separation of oil and open-quotes hazmatclose quotes response operations. Organizations that deal with oil spills have had difficulty applying Hazwoper regulations to oil spill operations. This hinders meaningful implementation of the standard for their personnel. We should approach oil spills with the same degree of caution that is applied to hazmat response. Training frequently does not address the safety of oil spill response operations. Site-specific safety and health plans often are neglected or omitted. Certain oils expose workers to carcinogens, as well as chronic and acute hazards. Significant physical hazards are most important. In responding to oil spills, the hazards must be addressed. It is the authors' contention that a need exists for safety program at oil spill sites. Gone are the days of labor pool hires cleaning up spills in jeans and sneakers. The key to meaningful programs for oil spills requires application of controls focused on relevant safety risks rather than minimal chemical exposure hazards. Working with concerned reviewers from other agencies and organizations, the authors have developed a general safety and health program for oil spill response. It is intended to serve as the basis for organizations to customize their own written safety and health program (required by OSHA). It also provides a separate generic site safety plan for emergency phase oil spill operations (check-list) and long term post-emergency phase operations

Lyndon B. Johnson Space Center (JSC) proposed dual-use technology investment program in intelligent robots

Science.gov (United States)

Erikson, Jon D.

1994-01-01

This paper presents an overview of the proposed Lyndon B. Johnson Space Center (JSC) precompetitive, dual-use technology investment project in robotics. New robotic technology in advanced robots, which can recognize and respond to their environments and to spoken human supervision so as to perform a variety of combined mobility and manipulation tasks in various sectors, is an obejective of this work. In the U.S. economy, such robots offer the benefits of improved global competitiveness in a critical industrial sector; improved productivity by the end users of these robots; a growing robotics industry that produces jobs and profits; lower cost health care delivery with quality improvements; and, as these 'intelligent' robots become acceptable throughout society, an increase in the standard of living for everyone. In space, such robots will provide improved safety, reliability, and productivity as Space Station evolves, and will enable human space exploration (by human/robot teams). The proposed effort consists of partnerships between manufacturers, universities, and JSC to develop working production prototypes of these robots by leveraging current development by both sides. Currently targeted applications are in the manufacturing, health care, services, and construction sectors of the U.S. economy and in the inspection, servicing, maintenance, and repair aspects of space exploration. But the focus is on the generic software architecture and standardized interfaces for custom modules tailored for the various applications allowing end users to customize a robot as PC users customize PC's. Production prototypes would be completed in 5 years under this proposal.

Integrated program of using of Probabilistic Safety Analysis in Spain

International Nuclear Information System (INIS)

1998-01-01

Since 25 June 1986, when the CSN (Nuclear Safety Conseil) approve the Integrated Program of Probabilistic Safety Analysis, this program has articulated the main activities of CSN. This document summarize the activities developed during these years and reviews the Integrated programme

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF's management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES ampersand H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES ampersand H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES ampersand H support organizations and administrative groups, and describes their interactions with the NIF Program

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF. During this period, all workers are required to implement measures to create a universal awareness which promotes safe practice at the work site, and which will achieve NIF`s management objectives in preventing accidents and illnesses. Construction safety for NIF is predicated on everyone performing their jobs in a manner which prevents job-related disabling injuries and illnesses. The CSP outlines the minimum environment, safety, and health (ES&H) standards, LLNL policies and the Construction Industry Institute (CII) Zero Injury Techniques requirements that all workers at the NIF construction site shall adhere to during the construction period of NIF. It identifies the safety requirements which the NIF organizational Elements, construction contractors and construction subcontractors must include in their safety plans for the construction period of NIF, and presents safety protocols and guidelines which workers shall follow to assure a safe and healthful work environment. The CSP also identifies the ES&H responsibilities of LLNL employees, non-LLNL employees, construction contractors, construction subcontractors, and various levels of management within the NIF Program at LLNL. In addition, the CSP contains the responsibilities and functions of ES&H support organizations and administrative groups, and describes their interactions with the NIF Program.

78 FR 16298 - Manufacturer of Controlled Substances, Notice of Registration; Johnson Matthey, Inc.

Science.gov (United States)

2013-03-14

... interest at this time. DEA has investigated Johnson Matthey, Inc., to ensure that the company's..., Notice of Registration; Johnson Matthey, Inc. By Notice dated November 5, 2012, and published in the Federal Register on November 13, 2012, 77 FR 67676, Johnson Matthey, Inc., Custom Pharmaceuticals...

Management of radioactive material safety programs at medical facilities. Final report

Energy Technology Data Exchange (ETDEWEB)

Camper, L.W.; Schlueter, J.; Woods, S. [and others

1997-05-01

A Task Force, comprising eight US Nuclear Regulatory Commission and two Agreement State program staff members, developed the guidance contained in this report. This report describes a systematic approach for effectively managing radiation safety programs at medical facilities. This is accomplished by defining and emphasizing the roles of an institution`s executive management, radiation safety committee, and radiation safety officer. Various aspects of program management are discussed and guidance is offered on selecting the radiation safety officer, determining adequate resources for the program, using such contractual services as consultants and service companies, conducting audits, and establishing the roles of authorized users and supervised individuals; NRC`s reporting and notification requirements are discussed, and a general description is given of how NRC`s licensing, inspection and enforcement programs work.

Research program on regulatory safety research - Synthesis report 2008

International Nuclear Information System (INIS)

Mailaender, R

2009-06-01

This report for the Swiss Federal Office of Energy (SFOE) summarises the program's main points of interest, work done in the year 2008 and the results obtained. The main points of the research program, which is co-ordinated by the Swiss Federal Nuclear Safety Inspectorate ENSI, are discussed. Topics covered concern reactor safety as well as human, organisational and safety aspects. Work done in several areas concerning reactor safety and materials as well as interactions in severe accidents in light-water reactors is described. Radiation protection, the transport and disposal of radioactive wastes and safety culture are also looked at. Finally, national and international co-operation is briefly looked at and work to be done in 2009 is reviewed. The report is completed with a list of research and development projects co-ordinated by ENSI

77 FR 16263 - Manufacturer of Controlled Substances, Notice of Registration; Johnson Matthey Inc.

Science.gov (United States)

2012-03-20

... the public interest at this time. DEA has investigated Johnson Matthey Inc. to ensure that the company..., Notice of Registration; Johnson Matthey Inc. By Notice dated November 18, 2011, and published in the Federal Register on November 28, 2011, 76 FR 72974, Johnson Matthey Inc., Custom Pharmaceuticals...

77 FR 24988 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey Inc.

Science.gov (United States)

2012-04-26

.... DEA has investigated Johnson Matthey Inc. to ensure that the company's registration is consistent with...; Notice of Registration; Johnson Matthey Inc. By Notice dated November 21, 2011, and published in the Federal Register on November 29, 2011, 76 FR 73679, Johnson Matthey Inc., Pharmaceuticals Materials, 900...

Fast reactor test facilities in the US safety program

International Nuclear Information System (INIS)

Avery, R.; Dickerman, C.E.; Lennox, D.H.; Rose, D.

1979-01-01

The needs for safety information derivable from in-pile programs are reviewed, and the correlation made with existing and planned capability. In view of the current status of the U.S. breeder program, emphasis is given in the review to the impact of different fast breeder options on the required program and facilities. It is concluded that facility needs are somewhat independent of specific fast breeder concept, even though the relative emphasis on the various safety issues will differ. 8 refs

A reliability program approach to operational safety

International Nuclear Information System (INIS)

Mueller, C.J.; Bezella, W.A.

1985-01-01

A Reliability Program (RP) model based on proven reliability techniques is being formulated for potential application in the nuclear power industry. Methods employed under NASA and military direction, commercial airline and related FAA programs were surveyed and a review of current nuclear risk-dominant issues conducted. The need for a reliability approach to address dependent system failures, operating and emergency procedures and human performance, and develop a plant-specific performance data base for safety decision making is demonstrated. Current research has concentrated on developing a Reliability Program approach for the operating phase of a nuclear plant's lifecycle. The approach incorporates performance monitoring and evaluation activities with dedicated tasks that integrate these activities with operation, surveillance, and maintenance of the plant. The detection, root-cause evaluation and before-the-fact correction of incipient or actual systems failures as a mechanism for maintaining plant safety is a major objective of the Reliability Program. (orig./HP)

Seismic safety margin assessment program (Annual safety research report, JFY 2010)

International Nuclear Information System (INIS)

Suzuki, Kenichi; Iijima, Toru; Inagaki, Masakatsu; Taoka, Hideto; Hidaka, Shinjiro

2011-01-01

Seismic capacity test data, analysis method and evaluation code provided by Seismic Safety Margin Assessment Program have been utilized for the support of seismic back-check evaluation of existing plants. The summary of the program in 2010 is as follows. 1. Component seismic capacity test and quantitative seismic capacity evaluation. Many seismic capacity tests of various snubbers were conducted and quantitative seismic capacities were evaluated. One of the emergency diesel generator partial-model seismic capacity tests was conducted and quantitative seismic capacity was evaluated. Some of the analytical evaluations of piping-system seismic capacities were conducted. 2. Analysis method for minute evaluation of component seismic response. The difference of seismic response of large components such as primary containment vessel and reactor pressure vessel when they were coupled with 3-dimensional FEM building model or 1-dimensional lumped mass building model, was quantitatively evaluated. 3. Evaluation code for quantitative evaluation of seismic safety margin of systems, structures and components. As the example, quantitative evaluation of seismic safety margin of systems, structures and components were conducted for the reference plant. (author)

Status report of the US Department of Energy's International Nuclear Safety Program

International Nuclear Information System (INIS)

1994-12-01

The US Department of Energy (DOE) implements the US Government's International Nuclear Safety Program to improve the level of safety at Soviet-designed nuclear power plants in Central and Eastern Europe, Russia, and Unkraine. The program is conducted consistent with guidance and policies established by the US Department of State (DOS) and the Agency for International Development and in close collaboration with the Nuclear Regulatory Commission. Some of the program elements were initiated in 1990 under a bilateral agreement with the former Soviet Union; however, most activities began after the Lisbon Nuclear Safety Initiative was announced by the DOS in 1992. Within DOE, the program is managed by the International Division of the Office of Nuclear Energy. The overall objective of the International Nuclear Safety Program is to make comprehensive improvements in the physical conditions of the power plants, plant operations, infrastructures, and safety cultures of countries operating Soviet-designed reactors. This status report summarizes the Internatioal Nuclear Safety Program's activities that have been completed as of September 1994 and discusses those activities currently in progress

Correlation between safety climate and contractor safety assessment programs in construction.

Science.gov (United States)

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.

41 CFR 128-1.8009 - Review of Seismic Safety Program.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Review of Seismic Safety Program. 128-1.8009 Section 128-1.8009 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Probabilistic studies for a safety assurance program

International Nuclear Information System (INIS)

Iyer, S.S.; Davis, J.F.

1985-01-01

The adequate supply of energy is always a matter of concern for any country. Nuclear power has played, and will continue to play an important role in supplying this energy. However, safety in nuclear power production is a fundamental prerequisite in fulfilling this role. This paper outlines a program to ensure safe operation of a nuclear power plant utilizing the Probabilistic Safety Studies

Overview of the Nuclear Regulatory Commission's safety research program

International Nuclear Information System (INIS)

Beckjord, E.S.

1989-01-01

Accomplishments during 1988 of the Office of Nuclear Regulatory Research and the program of safety research are highlighted, and plans, expections, and needs of the next year and beyond are discussed. Topics discussed include: ECCS Appendix K Revision; pressurized thermal shock; NUREG-1150, or the PRA method performance document; resolution of station blackout; severe accident integration plan; nuclear safety research review committee; and program management

Guidance for implementing an environmental, safety, and health-assurance program. Volume 15. A model plan for line organization environmental, safety, and health-assurance programs

Energy Technology Data Exchange (ETDEWEB)

Ellingson, A.C.; Trauth, C.A. Jr.

1982-01-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This particular document presents a model operational-level ES and H Assurance Program that may be used as a guide by an operational-level organization in developing its own plan. The model presented here reflects the guidance given in the total series of 15 documents.

Canadian Nuclear Safety Commission's intern program

International Nuclear Information System (INIS)

Gilmour, P.E.

2002-01-01

The Intern Program was introduced at the Canadian Nuclear Safety Commission, Canada's Nuclear Regulator in response to the current competitive market for engineers and scientists and the CNSC's aging workforce. It is an entry level staff development program designed to recruit and train new engineering and science graduates to eventually regulate Canada's nuclear industry. The program provides meaningful work experience and exposes the interns to the general work activities of the Commission. It also provides them with a broad awareness of the regulatory issues in which the CNSC is involved. The intern program is a two-year program focusing on the operational areas and, more specifically, on the generalist functions of project officers. (author)

High-temperature gas-cooled reactor safety-reliability program plan

Energy Technology Data Exchange (ETDEWEB)

1981-03-01

The purpose of this document is to present a safety plan as part of an overall program plan for the design and development of the High Temperature Gas-Cooled Reactor (HTGR). This plan is intended to establish a logical framework for identifying the technology necessary to demonstrate that the requisite degree of public risk safety can be achieved economically. This plan provides a coherent system safety approach together with goals and success criterion as part of a unifying strategy for licensing a lead reactor plant in the near term. It is intended to provide guidance to program participants involved in producing a technology base for the HTGR that is fully responsive to safety consideration in the design, evaluation, licensing, public acceptance, and economic optimization of reactor systems.

Area Safety Program for the tokamak fusion test reactor (TFTR)

International Nuclear Information System (INIS)

Rappe, G.M.

1984-10-01

Overall the Area Safety Program has proved to be a very successful operation. There is no doubt that a safety program organized through line management is the best way to involve all personnel. Naturally, when the program was first started, there was some criticism and a certain resistance on the part of a few individuals to fully participate. However, once the program was underway and it could be seen that it was working to everyone's advantage, this reluctance disappeared and a spirit of full cooperation is now enjoyed. It is very important that for this success to continue there must be a two way flow of information, both from the Area Safety Coordinators up through line management, and from senior management, with decisions and answers, back down through the management chain with the utmost dispatch. As with all programs, there is still room for improvement. This program has started a review cycle with a view to streamlining certain areas and possibly increasing its scope in others

Lessons learned from the safety assistance program for soviet-designed reactors

International Nuclear Information System (INIS)

Steinberg, N.

1999-01-01

Two examples of nuclear power situation were compared in this conference paper - the situation in Lithuania and the situation in the Ukraine. Based on the examples mentioned, author conclude that the effectiveness of the Multi-National Safety Assistance Program for Soviet -Designed Reactors in a given recipient country does not depend, in practice, on engineering issues. The principal aspects that determine this effectiveness are: first, the level of safety culture in the country, beginning at the Governmental level but also at the level of the senior managers of nuclear power. The other important factor which contributes is the availability of a well-developed national program for upgrading NPP safety. The economical well-being of nuclear power and of the country as a whole also has a major effect on the effectiveness of the western technical assistance programs that are trying to upgrade reactor safety in a particular recipient country. And finally, international community should have well coordinated and well substantiated safety assistance program for specific country

Reactor safety research program. A description of current and planned reactor safety research sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research

International Nuclear Information System (INIS)

1975-06-01

The reactor safety research program, sponsored by the Nuclear Regulatory Commission's Division of Reactor Safety Research, is described in terms of its program objectives, current status, and future plans. Elements of safety research work applicable to water reactors, fast reactors, and gas cooled reactors are presented together with brief descriptions of current and planned test facilities. (U.S.)

Determining Safety Inspection Thresholds for Employee Incentives Programs on Construction Sites.

Science.gov (United States)

Sparer, Emily; Dennerlein, Jack

2013-01-01

The goal of this project was to evaluate approaches of determining the numerical value of a safety inspection score that would activate a reward in an employee safety incentive program. Safety inspections are a reflection of the physical working conditions at a construction site and provide a safety score that can be used in incentive programs to reward workers. Yet it is unclear what level of safety should be used when implementing this kind of program. This study explored five ways of grouping safety inspection data collected during 19 months at Harvard University-owned construction projects. Each approach grouped the data by one of the following: owner, general contractor, project, trade, or subcontractor. The median value for each grouping provided the threshold score. These five approaches were then applied to data from a completed project in order to calculate the frequency and distribution of rewards in a monthly safety incentive program. The application of each approach was evaluated qualitatively for consistency, competitiveness, attainability, and fairness. The owner-specific approach resulted in a threshold score of 96.3% and met all of the qualitative evaluation goals. It had the most competitive reward distribution (only 1/3 of the project duration) yet it was also attainable. By treating all workers equally and maintaining the same value throughout the project duration, this approach was fair and consistent. The owner-based approach for threshold determination can be used by owners or general contractors when creating leading indicator incentives programs and by researchers in future studies on incentive program effectiveness.

MedWatch, the FDA Safety Information and Adverse Event Reporting Program

Science.gov (United States)

... Reporting Program MedWatch: The FDA Safety Information and Adverse Event Reporting Program Share Tweet Linkedin Pin it ... approved information that can help patients avoid serious adverse events. Potential Signals of Serious Risks/New Safety ...

Signal processing method for Johnson noise thermometry

International Nuclear Information System (INIS)

Hwang, I. G.; Moon, B. S.; Kinser, Rpger

2003-01-01

The development of Johnson Noise Thermometry requires a high sensitive preamplifier circuit to pick up the temperature-related noise on the sensing element. However, the random noise generated in this amplification circuit causes a significant erroneous influence to the measurement. This paper describes signal processing mechanism of the Johnson Noise Thermometry system which is underway of development in collaboration between KAERI and ORNL. It adopts two identical amplifier channels and utilizes a digital signal processing technique to remove the independent noise of each channel. The CPSD(Cross Power Spectral Density) function is used to cancel the independent noise and the differentiation of narrow or single frequency peak from the CPSD data separates the common mode electromagnetic interference noise

78 FR 66987 - Railroad Safety Technology Program Grant Program

Science.gov (United States)

2013-11-07

... carriers, railroad suppliers, and State and local governments for projects that have a public benefit of... projects . . . that have a public benefit of improved safety and network efficiency.'' To be eligible for... million. This grant program has a maximum 80-percent Federal and minimum 20-percent grantee cost share...

Water reactor safety research program. A description of current and planned research

International Nuclear Information System (INIS)

1978-07-01

The U.S. Nuclear Regulatory Commission (NRC) sponsors confirmatory safety research on lightwater reactors in support of the NRC regulatory program. The principal responsibility of the NRC, as implemented through its regulatory program is to ensure that public health, public safety, and the environment are adequately protected. The NRC performs this function by defining conditions for the use of nuclear power and by ensuring through technical review, audit, and follow-up that these conditions are met. The NRC research program provides technical information, independent of the nuclear industry, to aid in discharging these regulatory responsibilities. The objectives of NRC's research program are the following: (1) to maintain a confirmatory research program that supports assurance of public health and safety, and public confidence in the regulatory program, (2) to provide objectively evaluated safety data and analytical methods that meet the needs of regulatory activities, (3) to provide better quantified estimates of the margins of safety for reactor systems, fuel cycle facilities, and transportation systems, (4) to establish a broad and coherent exchange of safety research information with other Federal agencies, industry, and foreign organization. Current and planned research toward these goals is described

Development of nuclear safety issues program

Energy Technology Data Exchange (ETDEWEB)

Cho, J. C.; Yoo, S. O.; Yoon, Y. K.; Kim, H. J.; Jeong, M. J.; Noh, K. W.; Kang, D. K

2006-12-15

The nuclear safety issues are defined as the cases which affect the design and operation safety of nuclear power plants and also require the resolution action. The nuclear safety issues program (NSIP) which deals with the overall procedural requirements for the nuclear safety issues management process is developed, in accordance with the request of the scientific resolution researches and the establishment/application of the nuclear safety issues management system for the nuclear power plants under design, construction or operation. The NSIP consists of the following 4 steps; - Step 1 : Collection of candidates for nuclear safety issues - Step 2 : Identification of nuclear safety issues - Step 3 : Categorization and resolution of nuclear safety issues - Step 4 : Implementation, verification and closure The NSIP will be applied to the management directives of KINS related to the nuclear safety issues. Through the identification of the nuclear safety issues which may be related to the potential for accident/incidents at operating nuclear power plants either directly or indirectly, followed by performance of regulatory researches to resolve the safety issues, it will be possible to prevent occurrence of accidents/incidents as well as to cope with unexpected accidents/incidents by analyzing the root causes timely and scientifically and by establishing the proper flow-up or remedied regulatory actions. Moreover, the identification and resolution of the safety issues related to the new nuclear power plants completed at the design stage are also expected to make the new reactor licensing reviews effective and efficient as well as to make the possibility of accidents/incidents occurrence minimize. Therefore, the NSIP developed in this study is expected to contribute for the enhancement of the safety of nuclear power plants.

Development of nuclear safety issues program

International Nuclear Information System (INIS)

Cho, J. C.; Yoo, S. O.; Yoon, Y. K.; Kim, H. J.; Jeong, M. J.; Noh, K. W.; Kang, D. K.

2006-12-01

The nuclear safety issues are defined as the cases which affect the design and operation safety of nuclear power plants and also require the resolution action. The nuclear safety issues program (NSIP) which deals with the overall procedural requirements for the nuclear safety issues management process is developed, in accordance with the request of the scientific resolution researches and the establishment/application of the nuclear safety issues management system for the nuclear power plants under design, construction or operation. The NSIP consists of the following 4 steps; - Step 1 : Collection of candidates for nuclear safety issues - Step 2 : Identification of nuclear safety issues - Step 3 : Categorization and resolution of nuclear safety issues - Step 4 : Implementation, verification and closure The NSIP will be applied to the management directives of KINS related to the nuclear safety issues. Through the identification of the nuclear safety issues which may be related to the potential for accident/incidents at operating nuclear power plants either directly or indirectly, followed by performance of regulatory researches to resolve the safety issues, it will be possible to prevent occurrence of accidents/incidents as well as to cope with unexpected accidents/incidents by analyzing the root causes timely and scientifically and by establishing the proper flow-up or remedied regulatory actions. Moreover, the identification and resolution of the safety issues related to the new nuclear power plants completed at the design stage are also expected to make the new reactor licensing reviews effective and efficient as well as to make the possibility of accidents/incidents occurrence minimize. Therefore, the NSIP developed in this study is expected to contribute for the enhancement of the safety of nuclear power plants

Electronuclear's safety culture assessment and enhancement program

International Nuclear Information System (INIS)

Selvatici, E.; Diaz-Francisco, J.M.; Diniz de Souza, V.

2002-01-01

The present paper describes the Eletronuclear's safety culture assessment and enhancement program. The program was launched by the company's top management one year after the creation of Eletronuclear in 1997, from the merging of two companies with different organizational cultures, the design and engineering company Nuclen and the nuclear directorate of the Utility Furnas, Operator of the Angra1 NPP. The program consisted of an assessment performed internally in 1999 with the support and advice of the IAEA. This assessment, performed with the help of a survey, pooled about 80% of the company's employees. The overall result of the assessment was that a satisfactory level of safety culture existed; however, a number of points with a considerable margin for improvement were also identified. These points were mostly related with behavioural matters such as motivation, stress in the workplace, view of mistakes, handling of conflicts, and last but not least a view by a considerable number of employees that a conflict between safety and production might exist. An Action Plan was established by the company managers to tackle these weak points. This Plan was issued as company guideline by the company's Directorate. The subsequent step was to detail and implement the different actions of the Plan, which is the phase that we are at present. In the detailing of the Action Plan, special care was taken to sum up efforts, avoiding duplication of work or competition with already existing programs. In this process it was identified that the company had a considerable number of initiatives directly related to organizational and safety culture improvement, already operational. These initiatives have been integrated in the detailed Action Plan. A new assessment, for checking the effectiveness of the undertaken actions, is planned for 2003. (author)

Applying health education theory to patient safety programs: three case studies.

Science.gov (United States)

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Effect of generic issues program on improving safety

International Nuclear Information System (INIS)

Fard, M. R.; Kauffman, J. V.

2010-01-01

The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

99mTc-HIDA cholescintigraphy in Dubin-Johnson and Rotor syndromes

International Nuclear Information System (INIS)

Bar-Meir, S.; Baron, J.; Seligson, U.; Gottesfeld, F.; Levy, R.; Gilat, T.

1982-01-01

99mTc-HIDA cholescintigraphy was performed in 6 patients with Dubin-Johnson syndrome and 1 patient with Rotor syndrome. In the patients with Dubin-Johnson syndrome, the cholescintigrams had a characteristic pattern of delayed visualization or nonvisualization of the gallbladder and bile ducts in the presence of intense, homogeneous, and prolonged visualization of the liver. In the patient with Rotor syndrome, the hepatobiliary system was not visualized at all. It is concluded that 99mTc-HIDA cholescintigraphy may be helpful in the diagnosis of Dubin-Johnson syndrome and Rotor syndrome and in the differential diagnosis between these two conditions

Development and implementation of a hospital-based patient safety program

International Nuclear Information System (INIS)

Frush, Karen S.; Alton, Michael; Frush, Donald P.

2006-01-01

Evidence from numerous studies indicates that large numbers of patients are harmed by medical errors while receiving health-care services in the United States today. The 1999 Institute of Medicine report on medical errors recommended that hospitals and health-care agencies ''establish safety programs to act as a catalyst for the development of a culture of safety'' [1]. In this article, we describe one approach to successful implementation of a hospital-based patient safety program. Although our experience at Duke University Health System will be used as an example, the needs, principles, and solutions can apply to a variety of other health-care practices. Key components include the development of safety teams, provision of tools that teams can use to support an environment of safety, and ongoing program modification to meet patient and staff needs and respond to changing priorities. By moving patient safety to the forefront of all that we do as health-care providers, we can continue to improve our delivery of health care to children and adults alike. This improvement is fostered when we enhance the culture of safety, develop a constant awareness of the possibility of human and system errors in the delivery of care, and establish additional safeguards to intercept medical errors in order to prevent harm to patients. (orig.)

42 CFR 9.10 - Occupational Health and Safety Program (OHSP) and biosafety requirements.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Occupational Health and Safety Program (OHSP) and... SANCTUARY SYSTEM § 9.10 Occupational Health and Safety Program (OHSP) and biosafety requirements. (a) How are employee Occupational Health and Safety Program risks and concerns addressed? The sanctuary shall...

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model, fiscal year 2010 : [analysis brief].

Science.gov (United States)

2014-11-01

Two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs are the Roadside Inspection and Traffic Enforcement programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety in...

Management Oversight and Risk Tree (MORT): a new system safety program

International Nuclear Information System (INIS)

Clark, J.L.

Experiences of Aerojet Nuclear Company (ANC), in the development and implementation of a system safety program for ANC and for the Energy Research and Development Administration (ERDA) are discussed. Aerojet Nuclear is the prime operating contractor for ERDA, formerly AEC, at the Idaho National Engineering Laboratory. The ERDA sponsored ''MORT'' system safety program is described along with the process whereby formal system safety methods are incorporated into a stable organization. Specifically, a discussion is given of initial development of MORT; pilot program trials conducted at ANC; implementation methodology; and reaction of the ANC organization. (auth)

FMCSA safety program effectiveness measurement : Roadside Intervention Effectiveness Model FY 2012, [analysis brief].

Science.gov (United States)

2016-02-01

Roadside Inspection and Traffic Enforcement are two of : the Federal Motor Carrier Safety Administrations : (FMCSAs) key safety programs. The Roadside : Inspection Program consists of roadside inspections : performed by qualified safety inspect...

Radiation safety program in a high dose rate brachytherapy facility

International Nuclear Information System (INIS)

Rodriguez, L.V.; Hermoso, T.M.; Solis, R.C.

2001-01-01

The use of remote afterloading equipment has been developed to improve radiation safety in the delivery of treatment in brachytherapy. Several accidents, however, have been reported involving high dose-rate brachytherapy system. These events, together with the desire to address the concerns of radiation workers, and the anticipated adoption of the International Basic Safety Standards for Protection Against Ionizing Radiation (IAEA, 1996), led to the development of the radiation safety program at the Department of Radiotherapy, Jose R. Reyes Memorial Medical Center and at the Division of Radiation Oncology, St. Luke's Medical Center. The radiation safety program covers five major aspects: quality control/quality assurance, radiation monitoring, preventive maintenance, administrative measures and quality audit. Measures for evaluation of effectiveness of the program include decreased unnecessary exposures of patients and staff, improved accuracy in treatment delivery and increased department efficiency due to the development of staff vigilance and decreased anxiety. The success in the implementation required the participation and cooperation of all the personnel involved in the procedures and strong management support. This paper will discuss the radiation safety program for a high dose rate brachytherapy facility developed at these two institutes which may serve as a guideline for other hospitals intending to install a similar facility. (author)

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2011 : [analysis brief].

Science.gov (United States)

2015-06-01

Roadside Inspection and Traffic Enforcement are two of the Federal Motor Carrier Safety Administrations (FMCSAs) key safety programs. The Roadside Inspection program consists of roadside inspections performed by qualified safety inspectors. The...

Occupational Safety and Health Program at the West Valley Demonstration Project

International Nuclear Information System (INIS)

L. M. Calderon

1999-01-01

The West Valley Nuclear Services Co. LLC (WVNS) is committed to provide a safe, clean, working environment for employees, and to implement U.S. Department of Energy (DOE) requirements affecting worker safety. The West Valley Demonstration Project (WVDP) Occupational Safety and Health Program is designed to protect the safety, health, and well-being of WVDP employees by identifying, evaluating, and controlling biological, chemical, and physical hazards in the work place. Hazards are controlled within the requirements set forth in the reference section at the end of this report. It is the intent of the WVDP Occupational Safety and Health Program to assure that each employee is provided with a safe and healthy work environment. This report shows the logical path toward ensuring employee safety in planning work at the WVDP. In general, planning work to be performed safely includes: combining requirements from specific programs such as occupational safety, industrial hygiene, radiological control, nuclear safety, fire safety, environmental protection, etc.; including WVDP employees in the safety decision-making processes; pre-planning using safety support re-sources; and integrating the safety processes into the work instructions. Safety management principles help to define the path forward for the WVDP Occupational Safety and Health Program. Roles, responsibilities, and authority of personnel stem from these ideals. WVNS and its subcontractors are guided by the following fundamental safety management principles: ''Protection of the environment, workers, and the public is the highest priority. The safety and well-being of our employees, the public, and the environment must never be compromised in the aggressive pursuit of results and accomplishment of work product. A graded approach to environment, safety, and health in design, construction, operation, maintenance, and deactivation is incorporated to ensure the protection of the workers, the public, and the environment

The effectiveness of a bicycle safety program for improving safety-related knowledge and behavior in young elementary students.

Science.gov (United States)

McLaughlin, Karen A; Glang, Ann

2010-05-01

The purpose of this study was to evaluate the "Bike Smart" program, an eHealth software program that teaches bicycle safety behaviors to young children. Participants were 206 elementary students in grades kindergarten to 3. A random control design was employed to evaluate the program, with students assigned to either the treatment condition (Bike Smart) or the control condition (a video on childhood safety). Outcome measures included computer-based knowledge items (safety rules, helmet placement, hazard discrimination) and a behavioral measure of helmet placement. Results demonstrated that regardless of gender, cohort, and grade the participants in the treatment group showed greater gains than control participants in both the computer-presented knowledge items (p > .01) and the observational helmet measure (p > .05). Findings suggest that the Bike Smart program can be a low cost, effective component of safety training packages that include both skills-based and experiential training.

Aggressiveness of loose kernel smut isolate from Johnson grass on sorghum line BTx643

Science.gov (United States)

An isolate of loose kernel smut obtained from Johnson grass was inoculated unto six BTx643 sorghum plants in the greenhouse to determine its aggressiveness. All the BTx643 sorghum plants inoculated with the Johnson grass isolate were infected. Mean size of the teliospores from the Johnson grass, i...

Severe jaundice due to coexistence of Dubin-Johnson syndrome and hereditary spherocytosis: a case report.

Science.gov (United States)

Korkmaz, Uğur; Duman, Ali Erkan; Oğütmen Koç, Deniz; Gürbüz, Yeşim; Dındar, Gökhan; Ensaroğlu, Fatih; Sener, Selçuk Yusuf; Sentürk, Omer; Hülagü, Sadettin

2011-08-01

Dubin-Johnson syndrome is a chronic, benign, intermittent jaundice, mostly of conjugated hyperbilirubinemia. The level of bilirubin is not expected to be more than 20 mg/dl in this syndrome. In this article, we report a patient who was evaluated for hyperbilirubinemia and liver function test abnormalities and diagnosed with Dubin-Johnson syndrome coexisting with hereditary spherocytosis. We suggest that other diseases should be investigated if patients with Dubin-Johnson syndrome present with severe hyperbilirubinemia. Dubin-Johnson syndrome accompanied by hemolytic diseases might also have high coproporphyrin levels (as in Rotor's syndrome) than expected in pure Dubin-Johnson syndrome.

Findings From the National Machine Guarding Program-A Small Business Intervention: Machine Safety.

Science.gov (United States)

Parker, David L; Yamin, Samuel C; Xi, Min; Brosseau, Lisa M; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2016-09-01

The purpose of this nationwide intervention was to improve machine safety in small metal fabrication businesses (3 to 150 employees). The failure to implement machine safety programs related to guarding and lockout/tagout (LOTO) are frequent causes of Occupational Safety and Health Administration (OSHA) citations and may result in serious traumatic injury. Insurance safety consultants conducted a standardized evaluation of machine guarding, safety programs, and LOTO. Businesses received a baseline evaluation, two intervention visits, and a 12-month follow-up evaluation. The intervention was completed by 160 businesses. Adding a safety committee was associated with a 10% point increase in business-level machine scores (P increase in LOTO program scores (P < 0.0001). Insurance safety consultants proved effective at disseminating a machine safety and LOTO intervention via management-employee safety committees.

77 FR 24988 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey Pharma Services

Science.gov (United States)

2012-04-26

...; Notice of Registration; Johnson Matthey Pharma Services By Notice dated December 5, 2011, and published in the Federal Register on December 12, 2011, 76 FR 77257, Johnson Matthey Pharma Services, 70... factors in 21 U.S.C. 823(a) and determined that the registration of Johnson Matthey Pharma Services to...

The Impact of a Patient Safety Program on Medical Error Reporting

Science.gov (United States)

2005-05-01

307 The Impact of a Patient Safety Program on Medical Error Reporting Donald R. Woolever Abstract Background: In response to the occurrence of...a sentinel event—a medical error with serious consequences—Eglin U.S. Air Force (USAF) Regional Hospital developed and implemented a patient safety...communication, teamwork, and reporting. Objective: To determine the impact of a patient safety program on patterns of medical error reporting. Methods: This

Towards a practical Johnson noise thermometer for long-term measurements in harsh environments

International Nuclear Information System (INIS)

Greenen, Adam; Pearce, Jonathan; Cruickshank, David; Bramley, Paul

2015-01-01

The impact of mechanical and chemical changes in conventional sensors such as thermocouples and resistance thermometers can be avoided by instead using temperature sensors based on fundamental thermometry. A prime example of this is Johnson noise thermometry, which is based on measurement of the fluctuations in the voltage of a resistor arising from thermal motion of charge carriers - i.e. the 'Johnson noise'. A Johnson noise thermometer never needs calibration and is insensitive to the condition of the sensor material. It is therefore ideally suited to long-term temperature measurements in harsh environments, such as nuclear reactor coolant circuits, in-pile measurements, nuclear waste management and storage, and severe accident monitoring. There have been a number of previous attempts to develop a Johnson noise thermometer for the nuclear industry, but none have reached commercial exploitation because of technical problems in practical implementation. The main challenge is to extract the tiny Johnson noise signal from ambient electrical noise influences, both from the internal amplification electronics, and from external electrical noise sources. Recent advances in electronics technology and digital signal processing techniques have opened up new possibilities for developing a viable, practical Johnson noise thermometer. We describe a project funded by the UK Technology Strategy Board (now Innovate UK) 'Developing the nuclear supply chain' call, currently underway, to develop a practical Johnson noise thermometer that makes use of innovative electronics for ultralow noise amplification and signal processing. The new electronics technology has the potential to help overcome the problems encountered with previous attempts at constructing a practical Johnson noise thermometer. An outline of the new developments is presented, together with an overview of the current status of the project. (authors)

Towards a practical Johnson noise thermometer for long-term measurements in harsh environments

Energy Technology Data Exchange (ETDEWEB)

Greenen, Adam; Pearce, Jonathan [National Physical Laboratory, Hampton Road, Teddington, TW11 0LW, (United Kingdom); Cruickshank, David; Bramley, Paul [Metrosol Limited, Plum Park Estate, Watling Street, Paulerspury, Northamptonshire, NN12 6LQ, (United Kingdom)

2015-07-01

The impact of mechanical and chemical changes in conventional sensors such as thermocouples and resistance thermometers can be avoided by instead using temperature sensors based on fundamental thermometry. A prime example of this is Johnson noise thermometry, which is based on measurement of the fluctuations in the voltage of a resistor arising from thermal motion of charge carriers - i.e. the 'Johnson noise'. A Johnson noise thermometer never needs calibration and is insensitive to the condition of the sensor material. It is therefore ideally suited to long-term temperature measurements in harsh environments, such as nuclear reactor coolant circuits, in-pile measurements, nuclear waste management and storage, and severe accident monitoring. There have been a number of previous attempts to develop a Johnson noise thermometer for the nuclear industry, but none have reached commercial exploitation because of technical problems in practical implementation. The main challenge is to extract the tiny Johnson noise signal from ambient electrical noise influences, both from the internal amplification electronics, and from external electrical noise sources. Recent advances in electronics technology and digital signal processing techniques have opened up new possibilities for developing a viable, practical Johnson noise thermometer. We describe a project funded by the UK Technology Strategy Board (now Innovate UK) 'Developing the nuclear supply chain' call, currently underway, to develop a practical Johnson noise thermometer that makes use of innovative electronics for ultralow noise amplification and signal processing. The new electronics technology has the potential to help overcome the problems encountered with previous attempts at constructing a practical Johnson noise thermometer. An outline of the new developments is presented, together with an overview of the current status of the project. (authors)

Safety and efficacy of personal care products containing colloidal oatmeal

OpenAIRE

Criquet, Maryline; Roure, Romain; Dayan, Liliane; Nollent, Virginie; Bertin, Christiane

2012-01-01

Maryline Criquet,1 Romain Roure,1 Liliane Dayan,2 Virginie Nollent,1 Christiane Bertin11Johnson & Johnson Santé Beauté France, Issy les Moulineaux, 2Independent consultant dermatologist, Paris, FranceBackground: Colloidal oatmeal is a natural ingredient used in the formulation of a range of personal care products for relief of skin dryness and itchiness. It is also used as an adjunctive product in atopic dermatitis. The safety of personal care products used on vu...

Strategy for resolution of the Flammable Gas Safety Issue

International Nuclear Information System (INIS)

Johnson, G.D.

1995-01-01

The purpose of this document is to provide the general strategy for resolution of the flammable gas safety issue; it is not a detailed description of program activities. budgets and schedules. Details of the program activities have been issued (Johnson and Sherwood, 1994) and the information pertaining to budgets is provided in the FY 1995-1997 Multi-Year Work Plan for Tank Waste Remediation System (TWRS) (Program Element 1.1.1.2.02.). The key element in this strategy is to provide an understanding of the behavior of each of the Flammable Gas Watch List tanks. While a review of historical information does provide some insight, it is necessary to gather current information about the gases, behavior and nature of the waste,. and about the control systems that maintain and monitor the waste. Analysis of this information will enable TWRS to determine the best approach to place any tank in a safe condition, if it is found to be in an unsafe state

Commercial Crew Program Crew Safety Strategy

Science.gov (United States)

Vassberg, Nathan; Stover, Billy

2015-01-01

The purpose of this presentation is to explain to our international partners (ESA and JAXA) how NASA is implementing crew safety onto our commercial partners under the Commercial Crew Program. It will show them the overall strategy of 1) how crew safety boundaries have been established; 2) how Human Rating requirements have been flown down into programmatic requirements and over into contracts and partner requirements; 3) how CCP SMA has assessed CCP Certification and CoFR strategies against Shuttle baselines; 4) Discuss how Risk Based Assessment (RBA) and Shared Assurance is used to accomplish these strategies.

HLA-B Sequencing in Patients with Stevens-Johnson Syndrome and Toxic Epidermal Necrolysis

Science.gov (United States)

2017-03-03

Stevens -Johnson Syndrome and Toxic Epidermal Necrolysis Brittany L. Lenz, MD, Andrew T. Patterson, MD, Amanda J . Laska, MD, Patrick J . Brown, MD, and...59 MDW/SGVU SUBJECT: Professional Presentation Approval 8 DEC 2016 1. Your paper, entitled HLA-B Sequencing in Patients with Stevens -Johnson...PATIENTS WITH STEVENS -JOHNSON SYNDROME AND TOXIC EPIDERMAL NECROL YSIS 2. FUNDING RECEIVED FOR THIS STUDY? DYES rgj NO FUNDING SOURCE: I I 3. IS THIS

78 FR 14912 - International Aviation Safety Assessment (IASA) Program Change

Science.gov (United States)

2013-03-08

... Aviation Safety Assessment (IASA) Program Change AGENCY: Federal Aviation Administration (FAA), DOT. ACTION..., into the U.S., or codeshare with a U.S. air carrier, complies with international aviation safety... subject to that country's aviation safety oversight can serve the United States using its own aircraft or...

Johnson noise and the thermal Casimir effect

International Nuclear Information System (INIS)

Bimonte, Giuseppe

2007-01-01

We study the thermal interaction between two nearby thin metallic wires, at finite temperature. It is shown that the Johnson currents in the wires give rise, via inductive coupling, to a repulsive force between them. This thermal interaction exhibits all the puzzling features found recently in the thermal Casimir effect for lossy metallic plates, suggesting that the physical origin of the difficulties encountered in the Casimir problem resides in the inductive coupling between the Johnson currents inside the plates. We show that in our simple model all puzzles are resolved if account is taken of capacitive effects associated with the end points of the wires. Our findings suggest that capacitive finite-size effects may play an important role in the resolution of the analogous problems met in the thermal Casimir effect

Recovering Parameters of Johnson's SB Distribution

Science.gov (United States)

Bernard R. Parresol

2003-01-01

A new parameter recovery model for Johnson's SB distribution is developed. This latest alternative approach permits recovery of the range and both shape parameters. Previous models recovered only the two shape parameters. Also, a simple procedure for estimating the distribution minimum from sample values is presented. The new methodology...

Networking at NASA. Johnson Space Center

Science.gov (United States)

Garman, John R.

1991-01-01

A series of viewgraphs on computer networks at the Johnson Space Center (JSC) are given. Topics covered include information resource management (IRM) at JSC, the IRM budget by NASA center, networks evolution, networking as a strategic tool, the Information Services Directorate charter, and SSC network requirements, challenges, and status.

Evaluation of the Finnish nuclear safety research program 'SAFIR2010'

International Nuclear Information System (INIS)

2010-01-01

A panel of three members has been asked by the Ministry of Employment and the Economy (MEE) to evaluate SAFIR2010, the Finnish research program on nuclear power plant safety. The program was established for the period 2007-2010 to help maintain expertise in nuclear safety, to integrate young people into the research in order to help assure the future availability of expertise, and to support international collaborations. The program is directed by a Steering Group, appointed by MEE, with representatives from all organizations involved with nuclear safety in Finland. SAFIR2010 has consisted of approximately 30 projects from year to year that fall into eight subject areas: 1. Organization and human factors 2. Automation and control room 3. Fuel and reactor physics 4. Thermal hydraulics 5. Severe accidents 6. Structural safety of reactor circuit 7. Construction safety 8. Probabilistic safety analysis (PSA) For each of these areas there are Reference Groups that provide oversight of the projects within their jurisdiction. The panel carried out its evaluation by reviewing copies of relevant documents and, during a one-week period 17-22 January 2010, meeting with key individuals. The results of the panel are provided as general conclusions, responses to questions posed by MEE, challenges and recommendations and comments on specific projects in each subject area. The general conclusions reflect the panel's view that SAFIR2010 is meeting its objectives and carrying out quality research. The questions addressed are: (a.) Are the achieved results in balance with the funding? Are the results exploited efficiently in practice? (b.) How well does the expertise cover the field? Is the entire SAFIR2010 programme balanced to all different fields in nuclear safety? Does it raise efficiently new experts? (c.) Have the 2006 evaluation results been implemented successfully into SAFIR2010 program? (d.) Challenges and recommendations. In general the panel was very positive about SAFIR

Program of nuclear criticality safety experiment at JAERI

International Nuclear Information System (INIS)

Kobayashi, Iwao; Tachimori, Shoichi; Takeshita, Isao; Suzaki, Takenori; Ohnishi, Nobuaki

1983-11-01

JAERI is promoting the nuclear criticality safety research program, in which a new facility for criticality safety experiments (Criticality Safety Experimental Facility : CSEF) is to be built for the experiments with solution fuel. One of the experimental researches is to measure, collect and evaluate the experimental data needed for evaluation of criticality safety of the nuclear fuel cycle facilities. Another research area is a study of the phenomena themselves which are incidental to postulated critical accidents. Investigation of the scale and characteristics of the influences caused by the accident is also included in this research. The result of the conceptual design of CSEF is summarized in this report. (author)

Workplace safety and health programs, practices, and conditions in auto collision repair businesses.

Science.gov (United States)

Brosseau, L M; Bejan, A; Parker, D L; Skan, M; Xi, M

2014-01-01

This article describes the results of a pre-intervention safety assessment conducted in 49 auto collision repair businesses and owners' commitments to specific improvements. A 92-item standardized audit tool employed interviews, record reviews, and observations to assess safety and health programs, training, and workplace conditions. Owners were asked to improve at least one-third of incorrect, deficient, or missing (not in compliance with regulations or not meeting best practice) items, of which a majority were critical or highly important for ensuring workplace safety. Two-thirds of all items were present, with the highest fraction related to electrical safety, machine safety, and lockout/tagout. One-half of shops did not have written safety programs and had not conducted recent training. Many had deficiencies in respiratory protection programs and practices. Thirteen businesses with a current or past relationship with a safety consultant had a significantly higher fraction of correct items, in particular related to safety programs, up-to-date training, paint booth and mixing room conditions, electrical safety, and respiratory protection. Owners selected an average of 58% of recommended improvements; they were most likely to select items related to employee Right-to-Know training, emergency exits, fire extinguishers, and respiratory protection. They were least likely to say they would improve written safety programs, stop routine spraying outside the booth, or provide adequate fire protection for spray areas outside the booth. These baseline results suggest that it may be possible to bring about workplace improvements using targeted assistance from occupational health and safety professionals.

Sanitation & Safety for Child Feeding Programs.

Science.gov (United States)

Florida State Dept. of Health and Rehabilitative Services, Tallahassee.

In the interest of promoting good health, sanitation, and safety practices in the operation of child feeding programs, this bulletin discusses practices in personal grooming and wearing apparel; the purchasing, storage, handling, and serving of food; sanitizing equipment and utensils; procedures to follow in case of a food poisoning outbreak; some…

Safety Critical Java for Robotics Programming

DEFF Research Database (Denmark)

Thomsen, Bent; Luckow, Kasper Søe; Bøgholm, Thomas

2015-01-01

This paper introduces Safety Critical Java (SCJ) and argues its readiness for robotics programming. We give an overview of the work done at Aalborg University and elsewhere on SCJl, some of its implementations in the form of the JOP, FijiVM and HVM and some of the tools, especially WCA, Teta...

National Machine Guarding Program: Part 2. Safety management in small metal fabrication enterprises.

Science.gov (United States)

Parker, David L; Yamin, Samuel C; Brosseau, Lisa M; Xi, Min; Gordon, Robert; Most, Ivan G; Stanley, Rodney

2015-11-01

Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33-question safety management audit. Audits were completed during an interview with the business owner or manager. Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P < 0.0001). Critical safety management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

International Nuclear Information System (INIS)

Vance, W.F.

1979-01-01

A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices

Elimination of noise peak for signal processing in Johnson noise thermometry development

International Nuclear Information System (INIS)

Hwang, I. G.; Moon, B. S.; Jeong, J. E.; Jeo, Y. H.; Kisner, Roger A.

2003-01-01

The internal and external noise is the most considering obstacle in development of Johnson Noise Thermometry system. This paper addresses an external noise elimination issue of the Johnson Noise Thermometry system which is underway of development in collaboration between KAERI and ORNL. Although internal random noise is canceled by Cross Power Spectral Density function, a continuous wave penetrating into the electronic circuit is eliminated by the difference of peaks between Johnson signal and external noise. The elimination logic using standard deviation of CPSD and energy leakage problem in discrete CPSD function are discussed in this paper

/sup 99m/Tc-HIDA cholescintigraphy in Dubin-Johnson and Rotor syndromes

International Nuclear Information System (INIS)

Bar-Meir; Baron, J.; Seligson, U.; Gottesfeld, F.; Levy, R.; Gilat, T.

1982-01-01

/sup 99m/Tc-HIDA cholescintigraphy was performed in 6 patients with Dubin-Johnson syndrome and 1 patient with Rotor syndrome. In the patients with Dubin-Johnson syndrome, the cholescintigrams had a characteristic pattern of delayed visualization or nonvisualization of the gallbladder and bile ducts in the presence of intense, homogeneous, and prolonged visualization of the liver. In the patient with Rotor syndrome, the hepatobiliary system was not visualized at all. It is concluded that /sup 99m/Tc-HIDA cholescintigraphy may be helpful in the diagnosis of Dubin-Johnson syndrome and Rotor syndrome and in the differential diagnosis between these two conditions

Environment Health & Safety Research Program. Organization and 1979-1980 Publications

Energy Technology Data Exchange (ETDEWEB)

None

1981-01-01

This document was prepared to assist readers in understanding the organization of Pacific Northwest Laboratory, and the organization and functions of the Environment, Health and Safety Research Program Office. Telephone numbers of the principal management staff are provided. Also included is a list of 1979 and 1980 publications reporting on work performed in the Environment, Health and Safety Research Program, as well as a list of papers submitted for publication.

Fusion-Reactor-Safety Research Program. Annual report, Fiscal Year 1981

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1982-07-01

The report contains four sections: Outside Contracts includes the continuation of the General Atomic Co. low-activation materials safety study, water-cooled transport activation products study by Pacific Northwest Laboratory (PNL), studies of superconducting magnet safety conducted by Argonne National Laboratory (ANL) coupled with a new experimental superconducting magnet study program by Massachusetts Institute of Technology (MIT) to verify analytical work, a continuation of safety methodology work by MIT, portions of papers on lithium safety studies conducted at Hanford Engineering Development Laboratory (HEDL), and a new program to study tritium gas conversion to tritiated water at Oak Ridge National Laboratory (ORNL). The section EG and G idaho, Inc., Activities at INEL includes adaptations of papers of ongoing work in transient code development, tritium systems risk assessment, heat transfer activities, and a summary of a workshop on safety in design. A List of Publications and Proposed FY-82 Activities are also presented

NASA's aviation safety research and technology program

Science.gov (United States)

Fichtl, G. H.

1977-01-01

Aviation safety is challenged by the practical necessity of compromising inherent factors of design, environment, and operation. If accidents are to be avoided these factors must be controlled to a degree not often required by other transport modes. The operational problems which challenge safety seem to occur most often in the interfaces within and between the design, the environment, and operations where mismatches occur due to ignorance or lack of sufficient understanding of these interactions. Under this report the following topics are summarized: (1) The nature of operating problems, (2) NASA aviation safety research, (3) clear air turbulence characterization and prediction, (4) CAT detection, (5) Measurement of Atmospheric Turbulence (MAT) Program, (6) Lightning, (7) Thunderstorm gust fronts, (8) Aircraft ground operating problems, (9) Aircraft fire technology, (10) Crashworthiness research, (11) Aircraft wake vortex hazard research, and (12) Aviation safety reporting system.

An evaluation of an airline cabin safety education program for elementary school children.

Science.gov (United States)

Liao, Meng-Yuan

2014-04-01

The knowledge, attitude, and behavior intentions of elementary school students about airline cabin safety before and after they took a specially designed safety education course were examined. A safety education program was designed for school-age children based on the cabin safety briefings airlines given to their passengers, as well as on lessons learned from emergency evacuations. The course is presented in three modes: a lecture, a demonstration, and then a film. A two-step survey was used for this empirical study: an illustrated multiple-choice questionnaire before the program, and, upon completion, the same questionnaire to assess its effectiveness. Before the program, there were significant differences in knowledge and attitude based on school locations and the frequency that students had traveled by air. After the course, students showed significant improvement in safety knowledge, attitude, and their behavior intention toward safety. Demographic factors, such as gender and grade, also affected the effectiveness of safety education. The study also showed that having the instructor directly interact with students by lecturing is far more effective than presenting the information using only video media. A long-term evaluation, the effectiveness of the program, using TV or video accessible on the Internet to deliver a cabin safety program, and a control group to eliminate potential extraneous factors are suggested for future studies. Copyright © 2013 Elsevier Ltd. All rights reserved.

Chronic beryllium disease prevention program; worker safety and health program. Final rule.

Science.gov (United States)

2006-02-09

The Department of Energy (DOE) is today publishing a final rule to implement the statutory mandate of section 3173 of the Bob Stump National Defense Authorization Act (NDAA) for Fiscal Year 2003 to establish worker safety and health regulations to govern contractor activities at DOE sites. This program codifies and enhances the worker protection program in operation when the NDAA was enacted.

Price-Anderson Nuclear Safety Enforcement Program. 1997 annual report

International Nuclear Information System (INIS)

1998-01-01

This report summarizes activities in the Department of Energy's Price-Anderson Amendments Act (PAAA) Enforcement Program in calendar year 1997 and highlights improvements planned for 1998. The DOE Enforcement Program involves the Office of Enforcement and Investigation in the DOE Headquarters Office of Environment, Safety and Health, as well as numerous PAAA Coordinators and technical advisors in DOE Field and Program Offices. The DOE Enforcement Program issued 13 Notices of Violation (NOV's) in 1997 for cases involving significant or potentially significant nuclear safety violations. Six of these included civil penalties totaling $440,000. Highlights of these actions include: (1) Brookhaven National Laboratory Radiological Control Violations / Associated Universities, Inc.; (2) Bioassay Program Violations at Mound / EG ampersand G, Inc.; (3) Savannah River Crane Operator Uptake / Westinghouse Savannah River Company; (4) Waste Calciner Worker Uptake / Lockheed-Martin Idaho Technologies Company; and (5) Reactor Scram and Records Destruction at Sandia / Sandia Corporation (Lockheed-Martin). Sandia / Sandia Corporation (Lockheed-Martin)

Evaluating the effectiveness of a logger safety training program.

Science.gov (United States)

Bell, Jennifer L; Grushecky, Shawn T

2006-01-01

Logger safety training programs are rarely, if ever, evaluated as to their effectiveness in reducing injuries. Workers' compensation claim rates were used to evaluate the effectiveness of a logger safety training program, the West Virginia Loggers' Safety Initiative (LSI). There was no claim rate decline detected in the majority (67%) of companies that participated in all 4 years of the LSI. Furthermore, their rate did not differ from the rest of the WV logging industry that did not participate in the LSI. Worker turnover was significantly related to claim rates; companies with higher turnover of employees had higher claim rates. Companies using feller bunchers to harvest trees at least part of the time had a significantly lower claim rate than companies not using them. Companies that had more inspections per year had lower claim rates. High injury rates persist even in companies that receive safety training; high employee turnover may affect the efficacy of training programs. The logging industry should be encouraged to facilitate the mechanization of logging tasks, to address barriers to employee retention, and to increase the number of in-the-field performance monitoring inspections. Impact on industry There are many states whose logger safety programs include only about 4-8 hours of safe work practices training. These states may look to West Virginia's expanded training program (the LSI) as a model for their own programs. However, the LSI training may not be reaching loggers due to the delay in administering training to new employees and high levels of employee turnover. Regardless of training status, loggers' claim rates decline significantly the longer they work for a company. It may be that high injury rates in the state of West Virginia would be best addressed by finding ways to encourage and facilitate companies to become more mechanized in their harvesting practices, and to increase employee tenure. Increasing the number of yearly performance inspections

OPG - Waterways public safety program

Energy Technology Data Exchange (ETDEWEB)

Bennett, Tony [Ontario Power Generation (Canada)

2011-07-01

Ontario Power Generation (OPG) operates 65 hydroelectric generating stations in Ontario and has 241 dams. Security around dams is an important matter to minimize exposure of the public to hazards and to prevent an uncontrolled release of water and also to be prepared in case of failure. The purpose of this presentation is to describe the waterways public safety program developed by OPG in association with the Ontario Waterpower Associattion, the Canadian Dam Association and the Ontario Ministry of Natural Resoruces. This program takes a managed system approach with continuous review to address specific and changing conditions of sites. Policies, accountability mechanisms and assessments are first planned, and then implemented, every day functioning is monitored, corrective actions are developed on the basis of issues and reports are compiled for planning of new improvements. This research program provided OPG with new methods for preventing accidents more efficiently.

THE SCHOOL HEALTH AND SAFETY PROGRAM.

Science.gov (United States)

1963

INVOLVING INDIVIDUALS AS WELL AS ORGANIZATIONS, THE PROGRAM AIMED AT THE OPTIMUM HEALTH OF ALL CHILDREN, AND IMPROVEMENT OF HEALTH AND SAFETY STANDARDS WITHIN THE COMMUNITY. EACH OF THE CHILDREN WAS URGED TO HAVE A SUCCESSFUL VACCINATION FOR SMALL POX, THE DPT SERIES AND BOOSTER, THE POLIO SERIES, AND CORRECTIONS OF ALL DENTAL DEFECTS AND…

The USERDA transport R and D program for environment and safety

International Nuclear Information System (INIS)

Sisler, J.A.

1976-01-01

This paper describes the U.S. Energy Research and Development Administration's (ERDA) transportation environment and safety research and development program for energy fuels and wastes, including background, current activities, and future plans. It will serve as an overview and integrating factor for the several related technical papers to be presented at this meeting which will enlarge on the detail of specific projects. The transportation R and D program provides for the environmental and safety review of transport systems and procedures; standards development; and package, vehicle, and systems testing for nuclear materials transport. A primary output of the program is the collection, processing, and dissemination of transport environment and safety data, shipment statistics, and technical information. Special transport projects which do not easily fit elsewhere in ERDA are usually done as a part of this program. (author)

Johnson screen for cooling water intakes

International Nuclear Information System (INIS)

Cook, L.E.

1978-01-01

Johnson surface-water screens provide an alternative to vertical traveling screens for power plant cooling water intakes. In this paper, flow field modeling is discussed, and a series of case studies is presented. The hydraulic information obtained is discussed as it applies to the exclusion of biota and debris from cooling water intake systems

Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 1: Investigation report

Energy Technology Data Exchange (ETDEWEB)

Nashold, B.; Rosenblatt, D.; Hau, J. [and others

1995-08-01

This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations.

Assessment of elementary school safety restraint programs.

Science.gov (United States)

1985-06-01

The purpose of this research was to identify elementary school (K-6) safety belt : education programs in use in the United States, to review their development, and : to make administrative and impact assessments of their use in selected States. : Six...

77 FR 3784 - Recreational Boating Safety Projects, Programs and Activities Funded Under Provisions of the...

Science.gov (United States)

2012-01-25

... program which provides full marketing, media, public information, and program strategy support to the... Wear, Vessel Safety Check Program (VSC), Boating Safety Education Courses, Propeller Strike Avoidance, Carbon Monoxide Poisoning Awareness and Education, and other recreational boating safety issues on an as...

Application of quality assurance program to safety related aging equipment or components

International Nuclear Information System (INIS)

Papaiya, N.C.

1990-01-01

This paper addresses how quality assurance programs and their criteria are applied to safety related and aging equipment or components used in commercial nuclear plant applications. The QA Programs referred to are 10CFR50 Appendix B and EPRI NP-5652. The QA programs as applicable are applied to equipment/component aging qualification, preventive maintenance, surveillance testing and procurement engineering. The intent of this paper is not the technical issues, methods and research of aging. The paper addresses QA program's application to age-related equipment or components in safety related applications. Quality Assurance Program 10CFR50 Appendix B applies to all safety related aging components or equipment related to the qualification program and associated preventive maintenance and surveillance testing programs. Quality Assurance involvement with procurement engineering for age-related commercial grade items supports EPRI NP-5652 and assures that the dedicated OGI is equal to the item purchased as a basic component to 10CFR50 Appendix B requirements

XXI sajandi kontuurid / Paul Johnson ; refereerinud Mihkel Mutt

Index Scriptorium Estoniae

Johnson, Paul

1997-01-01

Washingtonis 14.-16. juunini peetud 'Lääne kirjanduse konverentsil' pidas põhiettekande ameerika ajaloolane ja publitsist Paul Johnson. Refereering tema 'XXI sajandi geopoliitiliste ja kultuuriliste väljavaadete' seisukohtadest

Parcels and Land Ownership, Parcel boundaries for Johnson County Kansas based off of legal description. Used to show spatial reference to parcel boundaries of Johnson County Kansas., Published in 2007, Johnson County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2007. Parcel boundaries for Johnson County Kansas based off of legal description. Used to show spatial reference to...

Clinton P. Anderson Meson Physics Facility and its operational safety program

International Nuclear Information System (INIS)

Putnam, T.M.

1975-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) at the Los Alamos Scientific Laboratory consists of/ (1) a medium-energy, high-intensity linear proton accelerator; (2) experimental areas designed to support a multidisciplined program of research and practical applications; and (3) support facilities for accelerator operations and the experimental program. The high-intensity primary and secondary beams at LAMPF and the varied research program create many interesting and challenging problems for the Health Physics staff. A brief overview of LAMPF is presented, and the Operational Safety Program is discussed, with emphasis on the radiological safety and health physics aspects

Revised GCFR safety program plan

International Nuclear Information System (INIS)

Kelley, A.P.; Boyack, B.E.; Torri, A.

1980-05-01

This paper presents a summary of the recently revised gas-cooled fast breeder reactor (GCFR) safety program plan. The activities under this plan are organized to support six lines of protection (LOPs) for protection of the public from postulated GCFR accidents. Each LOP provides an independent, sequential, quantifiable risk barrier between the public and the radiological hazards associated with postulated GCFR accidents. To implement a quantitative risk-based approach in identifying the important technology requirements for each LOP, frequency and consequence-limiting goals are allocated to each. To ensure that all necessary tasks are covered to achieve these goals, the program plan is broken into a work breakdown structure (WBS). Finally, the means by which the plan is being implemented are discussed

77 FR 59986 - Johnson Controls Including Workers Whose Wages Were Reported Under IMECO LLC; North American...

Science.gov (United States)

2012-10-01

... applicable to workers and former workers of Johnson Controls, North American Refrigeration, Dixon, Illinois... to TA-W-71,663 is hereby issued as follows: All workers of Johnson Controls, including workers whose... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,663] Johnson Controls...

Thermonuclear generation program: risks and safety

International Nuclear Information System (INIS)

Goes, Alexandre Gromann de Araujo

1999-01-01

This work deals with the fundamental concepts of risk and safety related to nuclear power generation. In the first chapter, a general evaluation of the various systems for energy generation and their environmental impacts is made. Some definitions for safety and risk are suggested, based on the already existing regulatory processes and also on the current tendencies of risk management. Aspects regarding the safety culture are commented. The International Nuclear Event Scale (INES), a coherent and clear mechanism of communication between nuclear specialists and the general public, is analyzed. The second chapter examines the thermonuclear generation program in Brazil and the role of the National Nuclear Energy Commission. The third chapter presents national and international scenarios in terms of safety and risks, available policies and the main obstacles for future development of nuclear energy and nuclear engineering, and strategies are proposed. In the last chapter, comments about possible trends and recommendations related to practical risk management procedures, taking into account rational criteria for resources distribution and risk reduction are made, envisaging a closer integration between nuclear specialists and the society as a whole, thus decreasing the conflicts in a democratic decision-making process

Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

Energy Technology Data Exchange (ETDEWEB)

Blakely, D [Alberta Environment, Edmonton, AB (Canada)

2009-07-01

Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

Prioritization of R and D programs on probabilistic reactor safety

International Nuclear Information System (INIS)

Husseiny, A.A.

1982-01-01

An interactive computer code based on the multiattribute utility theory has been developed with graphic capabilities to use in selection of probabilistic reactor safety RandD programs. Utility values and proper graphic representation are made through lottery games on the computer terminal. The code is applied to prioritize a set of RandD programs on LWR safety based on attributes including regulatory issues, institutional issues and operation problems. The methodology is described here in detail with its applications. Some of the input includes statistical distributions and subjective judgments on institutional issues. The flexibility of the approach provides a tool for decision makers whether on individual or group level to assess LWR safety priorities and continuously update their strategies

Home safe home: Evaluation of a childhood home safety program.

Science.gov (United States)

Stewart, Tanya Charyk; Clark, Andrew; Gilliland, Jason; Miller, Michael R; Edwards, Jane; Haidar, Tania; Batey, Brandon; Vogt, Kelly N; Parry, Neil G; Fraser, Douglas D; Merritt, Neil

2016-09-01

The London Health Sciences Centre Home Safety Program (HSP) provides safety devices, education, a safety video, and home safety checklist to all first-time parents for the reduction of childhood home injuries. The objective of this study was to evaluate the HSP for the prevention of home injuries in children up to 2 years of age. A program evaluation was performed with follow-up survey, along with an interrupted time series analysis of emergency department (ED) visits for home injuries 5 years before (2007-2013) and 2 years after (2013-2015) implementation. Spatial analysis of ED visits was undertaken to assess differences in home injury rates by dissemination areas controlling differences in socioeconomic status (i.e., income, education, and lone-parent status) at the neighborhood level. A total of 3,458 first-time parents participated in the HSP (a 74% compliance rate). Of these, 20% (n = 696) of parents responded to our questionnaire, with 94% reporting the program to be useful (median, 6; interquartile range, 2 on a 7-point Likert scale) and 81% learning new strategies for preventing home injuries. The median age of the respondent's babies were 12 months (interquartile range, 1). The home safety check list was used by 87% of respondents to identify hazards in their home, with 95% taking action to minimize the risk. The time series analysis demonstrated a significant decline in ED visits for home injuries in toddlers younger than2 years of age after HSP implementation. The declines in ED visits for home injuries remained significant over and above each socioeconomic status covariate. Removing hazards, supervision, and installing safety devices are key facilitators in the reduction of home injuries. Parents found the HSP useful to identify hazards, learn new strategies, build confidence, and provide safety products. Initial finding suggests that the program is effective in reducing home injuries in children up to 2 years of age. Therapeutic/care management study

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

Science.gov (United States)

Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33‐question safety management audit. Audits were completed during an interview with the business owner or manager. Results Most measures of safety management improved with an increasing number of employees. This trend was particularly strong for lockout/tagout. However, size was only significant for businesses without a safety committee. Establishments with a safety committee scored higher (55% vs. 36%) on the safety management audit compared with those lacking a committee (P management programs were frequently absent. A safety committee appears to be a more important factor than business size in accounting for differences in outcome measures. Am. J. Ind. Med. 58:1184–1193, 2015. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc. PMID:26345591

78 FR 46373 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey Pharmaceutical...

Science.gov (United States)

2013-07-31

...; Notice of Registration; Johnson Matthey Pharmaceutical Materials, Inc. By Notice dated March 20, 2013, and published in the Federal Register on March 28, 2013, 78 FR 19017, Johnson Matthey Pharmaceutical Materials, Inc., Pharmaceutical Services, 25 Patton Road, Devens, Massachusetts 01434, made application by...

Stevens-Johnson Syndrome (SJS) and Toxic Epidermal Necrolysis ...

African Journals Online (AJOL)

REVIEW. Introduction. Stevens-Johnson syndrome (SJS) and toxic epidermal ... that affect the skin and mucous membranes. ... Open Access article distributed under the terms of the .... pathogenic components are removed from plasma. The.

Stevens Johnsons syndrom og toksisk epidermal nekrolyse

DEFF Research Database (Denmark)

Kaur-Knudsen, Diljit; Zachariae, Claus; Thomsen, Simon Francis

2013-01-01

Stevens-Johnson syndrome and toxic epidermal necrolysis are acute mucocutaneous diseases primarily due to drug intake. The diseases are characterised by the separation of epidermis from dermis which can be life-threatening. Mortality is often caused by sepsis and multiple organ failure. The most...

[Fatal toxic respiratory epitheliolysis. Subacute tracheo-bronchial desquamation in Stevens-Johnson syndrome].

Science.gov (United States)

Martin, L; Hazouard, E; Michalak-Provost, S; Maurage, C; Machet, L

2001-09-01

Acute bronchial mucosal sloughing related to Toxic Epidermal Necrolysis (Lyell syndrome) is widely reported in literature. On the contrary severe respiratory involvement is rare in post-infectious or toxic Epitheliolysis (Stevens-Johnson syndrome). There is no well-known predictive sign of bronchial epithelium involvement. An 18-year-old patient was admitted for Stevens-Johnson syndrome related to sulfasalazine (salazosulfapyridine). There were no respiratory signs. An acute respiratory failure occurred 36 hours after from admission due to an obstructive and desquamative necrosis of the tracheobronchial epithelium. We purpose that a fiberoptic laryngoscopy should be performed even in non-dyspneic patients suffering from Stevens-Johnson syndrome if hypersecretion is present. Fiberoptic bronchoscopy can be helpful in these cases.

General aviation crash safety program at Langley Research Center

Science.gov (United States)

Thomson, R. G.

1976-01-01

The purpose of the crash safety program is to support development of the technology to define and demonstrate new structural concepts for improved crash safety and occupant survivability in general aviation aircraft. The program involves three basic areas of research: full-scale crash simulation testing, nonlinear structural analyses necessary to predict failure modes and collapse mechanisms of the vehicle, and evaluation of energy absorption concepts for specific component design. Both analytical and experimental methods are being used to develop expertise in these areas. Analyses include both simplified procedures for estimating energy absorption capabilities and more complex computer programs for analysis of general airframe response. Full-scale tests of typical structures as well as tests on structural components are being used to verify the analyses and to demonstrate improved design concepts.

Fusion Safety Program annual report, fiscal year 1984

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.

1985-06-01

This report summarizes the Fusion Safety Program major activities in fiscal year 1984. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and EG and G Idaho, Inc., is the prime contractor for this program, which was initiated in 1979. A report section titled ''Activities at the INEL'' includes progress reports on the tritium implantation experiment, tritium blanket permeation, volatilization of reactor alloys, plasma disruptions, a comparative blanket safety assessment, transient code development, and a discussion of the INEL's participation in the Tokamak Fusion Core Experiment (TFCX) design study. The report section titled ''Outside Contracts'' includes progress reports on tritium conversion by the Oak Ridge National Laboratory (ORNL), lithium-lead reactions by the Hanford Engineering Development Laboratory (HEDL) and the University of Wisconsin, magnet safety by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) and Argonne National Laboratory (ANL), risk assessment by MIT, tritium retention by the University of Virginia, and activation product release by GA Technologies. A list of publications produced during the year and brief descriptions of activities planned for FY-1985 are also included

Construction safety program for the National Ignition Facility, Appendix B

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety.

Construction safety program for the National Ignition Facility, Appendix B

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

This Appendix contains material from the LLNL Health and Safety Manual as listed below. For sections not included in this list, please refer to the Manual itself. The areas covered are: asbestos, lead, fire prevention, lockout, and tag program confined space traffic safety

78 FR 15975 - Manufacturer of Controlled Substances, Notice of Registration; Johnson Matthey, Inc...

Science.gov (United States)

2013-03-13

..., Notice of Registration; Johnson Matthey, Inc., Pharmaceuticals Materials By Notice dated November 1, 2012, and published in the Federal Register on November 9, 2012, 77 FR 67397, Johnson Matthey, Inc...) II The company plans to manufacture the listed controlled substances in bulk for distribution and...

Tank waste remediation system nuclear criticality safety program management review

International Nuclear Information System (INIS)

BRADY RAAP, M.C.

1999-01-01

This document provides the results of an internal management review of the Tank Waste Remediation System (TWRS) criticality safety program, performed in advance of the DOE/RL assessment for closure of the TWRS Nuclear Criticality Safety Issue, March 1994. Resolution of the safety issue was identified as Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-40-12, due September 1999

Canonical extensions of the Johnson homomorphisms to the Torelli groupoid

DEFF Research Database (Denmark)

Bene, Alex; Kawazumi, Nariya; Penner, Robert

2009-01-01

We prove that every trivalent marked bordered fatgraph comes equipped with a canonical generalized Magnus expansion in the sense of Kawazumi. This Magnus expansion is used to give canonical extensions of the higher Johnson homomorphisms τm , for m 1 , to the Torelli groupoid, and we provide...... a recursive combinatorial formula for tensor representatives of these extensions. In particular, we give an explicit 1-cocycle in the dual fatgraph complex which extends τ2 and thus answer affirmatively a question of Morita and Penner. To illustrate our techniques for calculating higher Johnson homomorphisms...

77 FR 30028 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey, Inc...

Science.gov (United States)

2012-05-21

...; Notice of Registration; Johnson Matthey, Inc., Pharmaceuticals Materials By Notice dated January 6, 2012, and published in the Federal Register on January 17, 2012, 77 FR 2324, Johnson Matthey, Inc... (9333) II The company plans to manufacture the listed controlled substances in bulk for sale to its...

Nuclear reactor safety program in US department of energy and future perspectives

International Nuclear Information System (INIS)

Song, Y.T.

1988-01-01

The US Department of Energy (DOE) establishes policy, issues orders, and assures compliance with requirements. The contractors who design, construct, modify, operate, maintain and decommission DOE reactors, set forth the assessment of the safety of cognizant reactors and implement DOE orders. Teams of experts in the Department, through scheduled and unscheduled review programs, reassess the safety of reactors in every phases of their lives. As new technology develops, the safety programs are reevaluated and policies are modified to accommodate these new technologies. The diagnostic capabilities of the computer using multiple alarms to enhance detection of defects and control of a reactor have been greatly utilized in reactor operating systems. The Application of artificial intelligence technologies for diagnostic and even for the decision making process in the event of reactor accidents would be one of the future trends in reactor safety programs

Prioritization of tasks in the draft LWR safety technology program plan. Final report

International Nuclear Information System (INIS)

Lim, E.Y.; Miller, W.J.; Parkinson, W.J.; Ritzman, R.L.; vonHerrmann, J.L.; Wood, P.J.

1980-05-01

The purpose of this report is to describe both the approach taken and the results produced in the SAI effort to prioritize the tasks in the Sandia draft LWR Safety Technology Program Plan. This work used the description of important safety issues developed in the Reactor Safety Study (2) to quantify the effect of safety improvements resulting from a research and development program on the risk from nuclear power plants. Costs of implementation of these safety improvements were also estimated to allow a presentation of the final results in a value (i.e., risk reduction) vs. impact (i.e., implementation costs) matrix

Fusion Safety Program annual report, fiscal year 1985

International Nuclear Information System (INIS)

Holland, D.F.; Merrill, B.J.; Herring, J.S.; Piet, S.J.; Longhurst, G.R.

1987-02-01

The Fusion Safety Program (FSP) has supported magnetic fusion technology for seven years, and this is the seventh annual report issued by the FSP. Program focus is identification of the magnitude and distribution of radioactive inventories in fusion reactors, and research and analysis of postulated accident scenarios that could cause the release of a portion of these inventories. Research results are used to develop improved designs that can reduce the probability and magnitude of such releases and thus improve the overall safety of fusion reactors. During FY-1985, research activities continued and participation continued on the Ignition Systems Project (ISP). This report presents the significant results of EGandG Idaho, Inc., activities and those from outside contracts, and includes a list of publications produced during the year, and activities planned for FY-1986

77 FR 67397 - Manufacturer of Controlled Substances; Notice of Application; Johnson Matthey, Inc.

Science.gov (United States)

2012-11-09

...; Notice of Application; Johnson Matthey, Inc. Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on September 10, 2012, Johnson Matthey, Inc., Pharmaceuticals Materials... Thebaine (9333) II The company plans to manufacture the listed controlled substances in bulk for...

78 FR 5499 - Manufacturer of Controlled Substances; Notice of Registration; Johnson Matthey, Inc.

Science.gov (United States)

2013-01-25

...; Notice of Registration; Johnson Matthey, Inc. By Notice dated May 9, 2012, and published in the Federal Register on May 21, 2012, 77 FR 30026, Johnson Matthey, Inc., Custom Pharmaceuticals Department, 2003 Nolte... substance listed in schedule II. The company plans to manufacture the listed controlled substance for sale...

78 FR 19016 - Importer of Controlled Substances; Notice of Registration; Johnson Matthey, Inc.

Science.gov (United States)

2013-03-28

... Registration; Johnson Matthey, Inc. By Notice dated November 19, 2012, and published in the Federal Register on November 27, 2012, 77 FR 70824, Johnson Matthey, Inc., Pharmaceutical Materials, 2003 Nolte Drive, West... Concentrate (9670) II The company plans to import the listed controlled substances as raw materials, to be...

Johnson-Matthey diffuser characterization testing

International Nuclear Information System (INIS)

Foster, P. J.; Klein, J. E.; Sessions, H. T.; Morgan, G. A.

2008-01-01

A diffuser/permeator commercially fabricated by Johnson-Matthey was purchased for characterization testing at the Savannah River National Laboratory (SRNL). A test system was fabricated to test not only feed and bleed flows and pressures, but also permeate pressure for flows up to 20 sLPM. The tests described in this paper consider the effect of various inert gas types, feed gas compositions, methods for temperature control, and varying tube pressure on permeation of H 2 through the Pd/Ag tubes. (authors)

Learning to Manage: A Program Just for Directors.

Science.gov (United States)

Thomas, Megan E.

1996-01-01

Describes the Head Start-Johnson & Johnson Management Fellows program, whose mission is strengthening management skills of Head Start directors by providing training in human resources management, organizational design and development, financial management, computers and information systems, operations, marketing, and development of strategic…

Fusion Safety Program annual report: Fiscal year 1986

International Nuclear Information System (INIS)

Holland, D.F.; Merrill, B.J.; Herring, J.S.; Piet, S.J.; Longhurst, G.R.

1987-06-01

This report summarizes the Fusion Safety Program's (FSP) major activities in fiscal year 1986. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory, and EG and G Idaho, Inc., is the prime contractor for FSP, which was initiated in 1979. Activities are conducted at the INEL and in participating facilities, including the Hanford Engineering Development Laboratory (HEDL), the Massachusetts Institute of Technology (MIT), and the University of Wisconsin. The technical areas covered in this report include tritium safety, activation product release, reactions involving lithium breeding materials, safety of fusion magnet systems, plasma disruption, risk assessment methodology, and computer code development for reactor transients. Contributions to the Technical Planning Activity (TPA) and the ''white paper'' study by the Environmental, Safety,and Economics Committee (ESECOM) are summarized. The report also includes a summary of the safety and environmental analysis and documentation performed by the INEL for the Compact Ignition Tokamak (CIT) design project

Training and qualification program for nuclear criticality safety technical staff. Revision 1

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1997-01-01

A training and qualification program for nuclear criticality safety technical staff personnel has been developed and implemented. All personnel who are to perform nuclear criticality safety technical work are required to participate in the program. The program includes both general nuclear criticality safety and plant specific knowledge components. Advantage can be taken of previous experience for that knowledge which is portable such as performance of computer calculations. Candidates step through a structured process which exposes them to basic background information, general plant information, and plant specific information which they need to safely and competently perform their jobs. Extensive documentation is generated to demonstrate that candidates have met the standards established for qualification

Safety analysis report upgrade program at the Plutonium Facility, Los Alamos National Laboratory

International Nuclear Information System (INIS)

Pan, P.Y.

1993-01-01

Plutonium research and development activities have resided at the Los Alamos National Laboratory (LANL) since 1943. The function of the Plutonium Facility (PF-4) has been to perform basic special nuclear materials research and development and to support national defense and energy programs. The original Final Safety Analysis Report (FSAR) for PF-4 was approved by DOE in 1978. This FSAR analyzed design-basis and bounding accidents. In 1986, DOE/AL published DOE/AL Order 5481.1B, ''Safety Analysis and Review System'', as a requirement for preparation and review of safety analyses. To meet the new DOE requirements, the Facilities Management Group of the Nuclear Material Technology Division submitted a draft FSAR to DOE for approval in April 1991. This draft FSAR analyzed the new configurations and used a limited-scope probabilistic risk analysis for accident analysis. During the DOE review of the draft FSAR, DOE Order 5480.23 ''Nuclear Safety Analysis Reports'', was promulgated and was later officially released in April 1992. The new order significantly expands the scope, preparation, and maintenance efforts beyond those required in DOE/AL Order 5481.1B by requiring: description of institutional and human-factor safety programs; clear definitions of all facility-specific safety commitments; more comprehensive and detailed hazard assessment; use of new safety analysis methods; and annual updates of FSARs. This paper describes the safety analysis report (SAR) upgrade program at the Plutonium Facility in LANL. The SAR upgrade program is established to meet the requirements in DOE Order 5480.23. Described in this paper are the SAR background, authorization basis for operations, hazard classification, and technical program elements

ERC Safety and Hygiene Programs functional organization structure and mission statement

International Nuclear Information System (INIS)

Coleman, S.R.

2000-01-01

This document provides a description of the functions, structure, commitments, and goals of the Environmental Restoration Contractor Safety and Hygiene Program. The current structure of the ERC Safety and Hygiene organization is described herein

European passive plant program preliminary safety analyses to support system design

International Nuclear Information System (INIS)

Saiu, Gianfranco; Barucca, Luciana; King, K.J.

1999-01-01

In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In the Phase 1 of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) was completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. Incorporation of the EUR has been a key design requirement for the EP1000 form the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. The present paper describes the EP1000 approach to safety analysis and, in particular, to the Design Extension Conditions that, according to the EUR, represent the preferred method for giving consideration to the Complex Sequences and Severe Accidents at the design stage without including them in the design bases conditions. Preliminary results of some DEC analyses and an overview of the probabilistic safety assessment (PSA) are also presented. (author)

Food Safety Program in Asian Countries.

Science.gov (United States)

Yamaguchi, Ryuji; Hwang, Lucy Sun

2015-01-01

By using the ILSI network in Asia, we are holding a session focused on food safety programs in several Asian areas. In view of the external environment, it is expected to impact the global food system in the near future, including the rapid increase in food demand and in public health services due to population growth, as well as the threats to biosecurity and food safety due to the rapid globalization of the food trade. Facilitating effective information sharing holds promise for the activation of the food industry. At this session, Prof. Hwang shares the current situation of Food Safety and Sanitation Regulations in Taiwan. Dr. Liu provides a talk on the role of risk assessment in food regulatory control focused on aluminum-containing food additives in China. After the JECFA evaluation of aluminum-containing food additives in 2011, each country has carried out risk assessment based on dietary intake surveys. Ms. Chan reports on the activities of a working group on Food Standards Harmonization in ASEAN. She also explains that the ILSI Southeast Asia Region has actively supported the various ASEAN Working Groups in utilizing science to harmonize food standards. Prof. Park provides current research activities in Korea focused on the effect of climate change on food safety. Climate change is generally seen as having a negative impact on food security, particularly in developing countries. We use these four presentations as a springboard to vigorous discussion on issues related to Food Safety in Asia.

78 FR 69132 - Manufacturer of Controlled Substances; Notice of Application; Johnson Matthey, Inc.

Science.gov (United States)

2013-11-18

...; Notice of Application; Johnson Matthey, Inc. Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on September 5, 2013, Johnson Matthey Inc., Custom Pharmaceuticals... Remifentanil (9739) II Sufentanil (9740) II Tapentadol (9780) II Fentanyl (9801) II The company plans to...

78 FR 69133 - Manufacturer of Controlled Substances; Notice of Application; Johnson Matthey, Inc.

Science.gov (United States)

2013-11-18

...; Notice of Application; Johnson Matthey, Inc. Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on September 5, 2013, Johnson Matthey, Inc., Pharmaceuticals Materials... Methadone (9250) II Methadone intermediate (9254) II Morphine (9300) II Thebaine (9333) II The company plans...

77 FR 30026 - Manufacturer of Controlled Substances; Notice of Application; Johnson Matthey, Inc.

Science.gov (United States)

2012-05-21

...; Notice of Application; Johnson Matthey, Inc. Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on March 26, 2012, Johnson Matthey, Inc., Custom Pharmaceuticals...), a basic class of controlled substance listed in schedule II. The company plans to manufacture the...

77 FR 67676 - Manufacturer of Controlled Substances; Notice of Application; Johnson Matthey Inc.

Science.gov (United States)

2012-11-13

...; Notice of Application; Johnson Matthey Inc. Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on September 10, 2012, Johnson Matthey Inc., Custom Pharmaceuticals... Remifentanil (9739) II Sufentanil (9740) II Fentanyl (9801) II The company plans to manufacture the listed...

14 CFR 91.25 - Aviation Safety Reporting Program: Prohibition against use of reports for enforcement purposes.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Aviation Safety Reporting Program... GENERAL OPERATING AND FLIGHT RULES General § 91.25 Aviation Safety Reporting Program: Prohibition against... to the National Aeronautics and Space Administration under the Aviation Safety Reporting Program (or...

Overview of a radiation safety program in a district style medical environment

International Nuclear Information System (INIS)

Wilson, G.

2006-01-01

This paper provides an overview of the eight components of a radiation safety program in a large health care facility spread out over several campuses in a large geographic area in Nova Scotia. The main focus is based on those areas that are regulated by the Canadian Nuclear Safety Commission and generally encompass nuclear medicine and radiation therapy operations. X-ray operations are regulated provincially, but the general operational principles of an effective radiation safety program can be applied in all these areas. The main components covered include the set up of an organizational structure that operates separately from individual departments, general items expected from reports to corporate management or regulators, and some examples of the front-line expectations for those in individual departments. The review is not all encompassing, but should give organizations some insight of the magnitude of a radiation safety program in a district style environment. (author)

National machine guarding program: Part 2. Safety management in small metal fabrication enterprises

OpenAIRE

Parker, David L.; Yamin, Samuel C.; Brosseau, Lisa M.; Xi, Min; Gordon, Robert; Most, Ivan G.; Stanley, Rodney

2015-01-01

Background Small manufacturing businesses often lack important safety programs. Many reasons have been set forth on why this has remained a persistent problem. Methods The National Machine Guarding Program (NMGP) was a nationwide intervention conducted in partnership with two workers' compensation insurers. Insurance safety consultants collected baseline data in 221 business using a 33?question safety management audit. Audits were completed during an interview with the business owner or manag...

123 Holy Johnson's Patriotism: an Ethical Challenge to

African Journals Online (AJOL)

User

2010-10-17

Oct 17, 2010 ... that James Johnson had been living several years before 1840, the date ascribed .... Hitherto assume it has been the fashion among scholars to that .... third millennium and fifty years after political independence, Nigeria as a.

The Role Of Quality Assurance Program For Safety Operation Of Nuclear Installations

International Nuclear Information System (INIS)

Harjanto, N.T.; Purwadi, K.P.; Boru, D.S.; Farida; Suharni

2000-01-01

Nuclear installations expose potential hazard of radiation, therefore in their construction, operation and maintenance, it is necessary to consider safety aspect, in which the safety requirements which has been determined must be met. One of the requirements that is absolutely needed is quality assurance, which covers arrangement of quality assurance program, organization and administration of the implementation of quality assurance, and supervision. Quality Assurance program is a guideline containing quality policies and basic determination on the realization of activities that effect the quality of equipment's and items used in the operation of nuclear installations in order that the operation of nuclear installation can run safety and in accordance with their design aims and operation limits. Quality Assurance Program includes document control, design control, supply control, control of equipment s and items, operation/process control, inspection and control of equipment test, and control of nonconformance and corrections. General system of nuclear installation operation is equipped with safety and supporting systems. These systems must apply the quality assurance program that cover control of activities in the systems. In the implementation of the quality assurance program, it is necessary to establish procedures, work guidelines/instructions, and quality recording that constitutes documents of quality system 2 nd , 3 th , and 4 th level after the quality assurance program. To ensure the effectivity and to prove whether the realization of the program has been pursuant to the determined requirements, an internal audit must be conducted accordingly

77 FR 16262 - Importer of Controlled Substances, Notice of Registration; Johnson Matthey, Inc., Pharmaceutical...

Science.gov (United States)

2012-03-20

... DEPARTMENT OF JUSTICE Drug Enforcement Administration Importer of Controlled Substances, Notice of Registration; Johnson Matthey, Inc., Pharmaceutical Materials By Notice dated December 2, 2011, and published in the Federal Register on December 12, 2011, 76 FR 77253, Johnson Matthey, Inc., Pharmaceutical...

Research program on nuclear technology and nuclear safety

International Nuclear Information System (INIS)

Dreier, J.

2010-04-01

This paper elaborated for the Swiss Federal Office of Energy (SFOE) presents the synthesis report for 2009 made by the SFOE's program leader on the research program concerning nuclear technology and nuclear safety. Work carried out, knowledge gained and results obtained in the various areas are reported on. These include projects carried out in the Laboratory for Reactor Physics and System Behaviour LRS, the LTH Thermohydraulics Laboratory, the Laboratory for Nuclear Materials LNM, the Laboratory for Final Storage Safety LES and the Laboratory for Energy Systems Analysis LEA of the Paul Scherrer Institute PSI. Work done in 2009 and results obtained are reported on, including research on transients in Swiss reactors, risk and human reliability. Work on the 'Proteus' research reactor is reported on, as is work done on component safety. International co-operation in the area of serious accidents and the disposal of nuclear wastes is reported on. Future concepts for reactors and plant life management are discussed. The energy business in general is also discussed. Finally, national and international co-operation is noted and work to be done in 2010 is reviewed

Observed Food Safety Practices in the Summer Food Service Program

Science.gov (United States)

Patten, Emily Vaterlaus; Alcorn, Michelle; Watkins, Tracee; Cole, Kerri; Paez, Paola

2017-01-01

Purpose/Objectives: The purpose of this exploratory, observational study was three-fold: 1) Determine current food safety practices at Summer Food Service Program (SFSP) sites; 2) Identify types of food served at the sites and collect associated temperatures; and 3) Establish recommendations for food safety training in the SFSP.…

Joint FAM/Line Management Assessment Report on LLNL Machine Guarding Safety Program

Energy Technology Data Exchange (ETDEWEB)

Armstrong, J. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-07-19

The LLNL Safety Program for Machine Guarding is implemented to comply with requirements in the ES&H Manual Document 11.2, "Hazards-General and Miscellaneous," Section 13 Machine Guarding (Rev 18, issued Dec. 15, 2015). The primary goal of this LLNL Safety Program is to ensure that LLNL operations involving machine guarding are managed so that workers, equipment and government property are adequately protected. This means that all such operations are planned and approved using the Integrated Safety Management System to provide the most cost effective and safest means available to support the LLNL mission.

75 FR 44051 - Resolicitation of Applications for the Railroad Safety Technology Program Grant Program (RS-TEC...

Science.gov (United States)

2010-07-27

... have a public benefit of improved railroad safety and efficiency. The program makes available $50... projects * * * that have a public benefit of improved safety and network efficiency.'' To be eligible for... percent grantee, cost share (cash or in-kind) requirement. Applications that do not clearly indicate at...

Program plan for evaluation of the Ferrocyanide Waste Tank safety issue at the Hanford Site

International Nuclear Information System (INIS)

Borsheim, G.L.; Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1994-03-01

This document describes the background, priorities, strategy and logic, and task descriptions for the Ferrocyanide Waste Tank Safety Program. The Ferrocyanide Safety Program was established in 1990 to provide resolution of a major safety issue identified for 24 high-level radioactive waste tanks at the Hanford Site

Software programming languages for use in developing safety systems of nuclear power plant

Energy Technology Data Exchange (ETDEWEB)

Lee, Jang Soo

1997-07-01

This report provides guidance to a verifier on reviewing of programs for safety systems written in the high level languages, such as Ada, C, and C++. The focus of the report is on programming, not design, requirements engineering, or testing. We have defined the attributes, for example, reliability, robustness, traceability, and maintainability, which largely define a general quality of software related to safety. Although an extensive revision to the standard of Ada occurred in 1995, current compiler implementations are insufficiently mature to be considered for safety systems. The discussion on C program emphasized the problem in memory allocation and deallocation, pointers, control flow, and software interface. (author). 26 refs.

30 CFR 77.1708 - Safety program; instruction of persons employed at the mine.

Science.gov (United States)

2010-07-01

... at the mine. 77.1708 Section 77.1708 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Miscellaneous § 77.1708 Safety program; instruction of persons...

A peer-to-peer traffic safety campaign program.

Science.gov (United States)

2014-06-01

The purpose of this project was to implement a peer-to-peer drivers safety program designed for high school students. : This project builds upon an effective peer-to-peer outreach effort in Texas entitled Teens in the Driver Seat (TDS), the : nati...

Construction safety program for the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Cerruti, S.J.

1997-06-26

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF.

Construction safety program for the National Ignition Facility

International Nuclear Information System (INIS)

Cerruti, S.J.

1997-01-01

The Construction Safety Program (CSP) for NIF sets forth the responsibilities, guidelines, rules, policies and regulations for all workers involved in the construction, special equipment installation, acceptance testing, and initial activation and operation of NIF at LLNL during the construction period of NIF

An Introduction of Behavior-Based Safety Program in Nuclear Power Plants

International Nuclear Information System (INIS)

Lee, Yong Hee; Lim, Hyeon Kyo

2011-01-01

There are many methods and approaches for a human error assessment that is valuable for investigating the causes of undesirable events and counter-plans to prevent their recurrence in the nuclear power plants (NPPs). There is behavior-based safety refers to the process of using a proactive approach to safety and health management. It either focuses on risk of behaviors that can lead to an injury, or on safe behaviors that can contribute to injury prevention. Early applications of behavior based safety included the construction and manufacturing industries, but today behavior based safety is applied to a wide variety of industries and service lines. This behavior based safety program can offer a set of significant human error countermeasures to be considered for human error in NPPs as well as other fields of industry. The current methods for the human error prevention in NPPs are several techniques such as Self-Check, Peer Check, Concurrent Verification, 3-way Communication, etc. However, it is not enough to grasp the whole human error problems in operations because the things are needed in fields are a behavior technique not a simple knowledge. Therefore, we applied a behavior based safety program on the current methods

Stevens-Johnson syndrome in a patient with rheumatoid arthritis during long-term etanercept therapy.

Science.gov (United States)

Owczarczyk-Saczonek, Agnieszka; Zdanowska, Natalia; Znajewska-Pander, Aleksandra; Placek, Waldemar

2016-03-31

Etanercept and other anti-TNF-alpha agents have been indicated as a therapeutic option in severe drug reactions, including Stevens-Johnson syndrome and toxic epidermal necrolysis. Etanercept has been shown to quickly reduce the detachment of the epidermis and shorten healing time. Cases of etanercept-induced severe adverse drug reactions were also described. A 27-year-old woman with a 4-year history of etanercept and sulfasalazine treatment for rheumatoid arthritis was admitted with Stevens-Johnson syndrome. The patient received one dose of an OTC drug containing acetaminophen, phenylephrine and pheniramine two days prior to developing fist mucocutaneous symptoms. The most probable causative agent was paracetamol. Throughout the successful routine therapy of Stevens-Johnson syndrome etanercept therapy was continued. Sulfosalazin administration was stopped and administered again after recovery with no recurrence of the skin and mucosal symptoms. This case indicates that there is no justification for discontinuation of long-term anti-TNF-alpha treatment in patients who develop Stevens- Johnson syndrome / toxic epidermal necrolysis.

Quarterly report on the Ferrocyanide Safety Program for the period ending, March 31, 1995

International Nuclear Information System (INIS)

Cash, R.J.; Meacham, J.E.; Dukelow, G.T.

1995-04-01

This quarterly report provides a status of the activities underway on the Ferrocyanide Safety Issue at the Hanford Site, including actions in response to Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 90-7 (FR 1990). In March 1991, a DNFSB implementation plan (Cash 1991) responding to the six parts of Recommendation 90-7 was prepared and sent to the DNFSB. A Ferrocyanide Safety Program Plan addressing the total Ferrocyanide Safety Program, including the six parts of DNFSB Recommendation 90-7, was released in October 1994 (DOE 1994b). Activities in the program plan are underway or have been completed, and the status of each is described in Sections 2.0 and 3.0 of this report

Mark I containment, short term program. Safety evaluation report

International Nuclear Information System (INIS)

1977-12-01

Presented is a Safety Evaluation Report (SER) prepared by the Office of Nuclear Reactor Regulation addressing the Short Term Program (STP) reassessment of the containment systems of operating Boiler Water Reactor (BWR) facilities with the Mark I containment system design. The information presented in this SER establishes the basis for the NRC staff's conclusion that licensed Mark I BWR facilities can continue to operate safely, without undue risk to the health and safety of the public, during an interim period of approximately two years while a methodical, comprehensive Long Term Program (LTP) is conducted. This SER also provides one of the basic foundations for the NRC staff review of the Mark I containment systems for facilities not yet licensed for operation

Samuel P. Massie Chair of Excellence Program

Energy Technology Data Exchange (ETDEWEB)

Johnson, James H. [Howard Univ., Washington, DC (United States)

2014-12-01

Abstract In 1994 the Department of Energy established the DOE Chair of Excellence Professorship in Environmental Disciplines Program. In 2004, the Massie Chair of Excellence Professor at Howard University transitioned from Dr. Edward Martin to Dr. James H. Johnson, Jr. At the time of his appointment Dr. Johnson served as professor of civil engineering and Dean of the College of Engineering, Architecture and Computer Sciences. Program activities under Dr. Johnson were in the following areas: • Increase the institution’s capacity to conduct scientific research and technical investigations at the cutting-edge. • Promote interactions, collaborations and partnerships between the private sector, Federal agencies, majority research institutes and other HBCUs. • Assist other HBCUs in reaching parity in engineering and related fields. • Mentor young investigators and be a role model for students.

Station Program Note Pull Automation

Science.gov (United States)

Delgado, Ivan

2016-01-01

Upon commencement of my internship, I was in charge of maintaining the CoFR (Certificate of Flight Readiness) Tool. The tool acquires data from existing Excel workbooks on NASA's and Boeing's databases to create a new spreadsheet listing out all the potential safety concerns for upcoming flights and software transitions. Since the application was written in Visual Basic, I had to learn a new programming language and prepare to handle any malfunctions within the program. Shortly afterwards, I was given the assignment to automate the Station Program Note (SPN) Pull process. I developed an application, in Python, that generated a GUI (Graphical User Interface) that will be used by the International Space Station Safety & Mission Assurance team here at Johnson Space Center. The application will allow its users to download online files with the click of a button, import SPN's based on three different pulls, instantly manipulate and filter spreadsheets, and compare the three sources to determine which active SPN's (Station Program Notes) must be reviewed for any upcoming flights, missions, and/or software transitions. Initially, to perform the NASA SPN pull (one of three), I had created the program to allow the user to login to a secure webpage that stores data, input specific parameters, and retrieve the desired SPN's based on their inputs. However, to avoid any conflicts with sustainment, I altered it so that the user may login and download the NASA file independently. After the user has downloaded the file with the click of a button, I defined the program to check for any outdated or pre-existing files, for successful downloads, to acquire the spreadsheet, convert it from a text file to a comma separated file and finally into an Excel spreadsheet to be filtered and later scrutinized for specific SPN numbers. Once this file has been automatically manipulated to provide only the SPN numbers that are desired, they are stored in a global variable, shown on the GUI, and

Linking Gateway Technical College with Workforce Development: The SC Johnson-A Family Company Story.

Science.gov (United States)

Knudson, Edward

2004-01-01

Seven years ago, SC Johnson--A Family Company approached Gateway Technical College with a need to further strengthen their incumbent workforce's technical training and education. Retirements, brain drain, and competition for technical expertise were the forces driving SC Johnson to develop a comprehensive, flexible, and timely workplace education…

NASA Johnson Space Center Usability Testing and Analysis Facility (WAF) Overview

Science.gov (United States)

Whitmore, M.

2004-01-01

The Usability Testing and Analysis Facility (UTAF) is part of the Space Human Factors Laboratory at the NASA Johnson Space Center in Houston, Texas. The facility provides support to the Office of Biological and Physical Research, the Space Shuttle Program, the International Space Station Program, and other NASA organizations. In addition, there are ongoing collaborative research efforts with external businesses and universities. The UTAF provides human factors analysis, evaluation, and usability testing of crew interfaces for space applications. This includes computer displays and controls, workstation systems, and work environments. The UTAF has a unique mix of capabilities, with a staff experienced in both cognitive human factors and ergonomics. The current areas of focus are: human factors applications in emergency medical care and informatics; control and display technologies for electronic procedures and instructions; voice recognition in noisy environments; crew restraint design for unique microgravity workstations; and refinement of human factors processes. This presentation will provide an overview of ongoing activities, and will address how the projects will evolve to meet new space initiatives.

Analyzing and strengthening the vaccine safety program in Manitoba.

Science.gov (United States)

Montalban, J M; Ogbuneke, C; Hilderman, T

2014-12-04

The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS's) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program.

The Nordic program for nuclear safety 1990-1993

International Nuclear Information System (INIS)

1991-02-01

The status of ongoing projects under The Nordic Program for Nuclear Safety (NKS) 1990-1993, and the economy of the programme is presented. A review of projects, projects managers and coordinators, and a list of members of NKS and associated members is included. (CLS)

Fatal nevirapine-induced Stevens- Johnson syndrome with HIV ...

African Journals Online (AJOL)

2014-06-01

Jun 1, 2014 ... of Stevens-Johnson syndrome highlights the dilemmas and complications that may arise when prescribing multiple medications in HIV-associated ... HIV enters the central nervous system early in the course of HIV ... Affected individuals with SJS/TEN are genetically predisposed to developing severe ...

Nuclear reactor safety program in U.S. Department of Energy and future perspectives

International Nuclear Information System (INIS)

Song, Y.T.

1987-01-01

The U.S. Department of Energy (DOE) establishes policy, issues orders, and assures compliance with requirements. The contractors who design, construct, modify, operate, maintain and decommission DOE reactors, set forth the assessment of the safety of cognizant reactors and impliment DOE orders. Teams of experts in the Depatment, through scheduled and unscheduled review programs, reassess the safety of reactors in every phases of their lives. As new technology develops, the safety programs are reevaluated and policies are modified to accommodate these new technologies. The diagnostic capabilities of the computer using multiple alarms to enhance detection of defects and control of a reactor have been greatly utilized in reactor operating systems. The application of artificial intelligence (AI) technologies for diagnostic and even for the decision making process in the event of reactor accidents would be one of the future trends in reactor safety programs. (author)

Identifying the Critical Factors Affecting Safety Program Performance for Construction Projects within Pakistan Construction Industry

Directory of Open Access Journals (Sweden)

Zubair Ahmed Memon

2013-04-01

Full Text Available Many studies have shown that the construction industry one of the most hazardous industries with its high rates of fatalities and injuries and high financial losses incurred through work related accident. To reduce or overcome the safety issues on construction sites, different safety programs are introduced by construction firms. A questionnaire survey study was conducted to highlight the influence of the Construction Safety Factors on safety program implementation. The input from the questionnaire survey was analyzed by using AIM (Average Index Method and rank correlation test was conducted between different groups of respondents to measure the association between different groups of respondent. The finding of this study highlighted that management support is the critical factor for implementing the safety program on projects. From statistical test, it is concluded that all respondent groups were strongly in the favor of management support factor as CSF (Critical Success Factor. The findings of this study were validated on selected case studies. Results of the case studies will help to know the effect of the factors on implementing safety programs during the execution stage.

Price-Anderson Nuclear Safety Enforcement Program. 1996 Annual report

International Nuclear Information System (INIS)

1996-01-01

This first annual report on DOE's Price Anderson Amendments Act enforcement program covers the activities, accomplishments, and planning for calendar year 1996. It also includes the infrastructure development activities of 1995. It encompasses the activities of the headquarters' Office of Enforcement in the Office of Environment, Safety and Health (EH) and Investigation and the coordinators and technical advisors in DOE's Field and Program Offices and other EH Offices. This report includes an overview of the enforcement program; noncompliances, investigations, and enforcement actions; summary of significant enforcement actions; examples where enforcement action was deferred; and changes and improvements to the program

Liquefied Gaseous Fuels Safety and Environmental Control Assessment Program: second status report

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

The Assistant Secretary for Environment has responsibility for identifying, characterizing, and ameliorating the environmental, health, and safety issues and public concerns associated with commercial operation of specific energy systems. The need for developing a safety and environmental control assessment for liquefied gaseous fuels was identified by the Environmental and Safety Engineering Division as a result of discussions with various governmental, industry, and academic persons having expertise with respect to the particular materials involved: liquefied natural gas, liquefied petroleum gas, hydrogen, and anhydrous ammonia. This document is arranged in three volumes and reports on progress in the Liquefied Gaseous Fuels (LGF) Safety and Environmental Control Assessment Program made in Fiscal Year (FY)-1979 and early FY-1980. Volume 1 (Executive Summary) describes the background, purpose and organization of the LGF Program and contains summaries of the 25 reports presented in Volumes 2 and 3. Annotated bibliographies on Liquefied Natural Gas (LNG) Safety and Environmental Control Research and on Fire Safety and Hazards of Liquefied Petroleum Gas (LPG) are included in Volume 1.

Genetics Home Reference: Stevens-Johnson syndrome/toxic epidermal necrolysis

Science.gov (United States)

... Hung SI. Recent advances in the genetics and immunology of Stevens-Johnson syndrome and toxic epidermal necrosis. ... 2012 May 29. Citation on PubMed or Free article on PubMed Central More from Genetics Home Reference ...

Radiation safety and protection in US dental hygiene programs

International Nuclear Information System (INIS)

Farman, A.G.; Hunter, N.; Grammer, S.

1986-01-01

A survey of radiation safety and protection measures used by programs teaching dental hygiene indicated some areas for concern. No barriers or radiation shieldings were used between operator and patient in four programs. Radiation monitoring devices were not worn by faculty operators in 16% of the programs. Fewer than half of the programs used thyroid shields for patients on a routine basis. Insufficient filtration for the kilovolt peak employed was used by 14% of the programs, and for 19% more the filtration was unknown or unspecified. Three programs used closed cones. Rectangular collimation was not used at all by 63% of the programs, and only 20% used E speed film routinely. Quality assurance for equipment maintenance and for film processing were in place at only 54% and 49% of the programs, respectively

Alberta Environment's weir safety program : options for rehabilitation to improve public safety : a case study of the Calgary weir

Energy Technology Data Exchange (ETDEWEB)

Blakely, D. [Alberta Environment, Edmonton, AB (Canada)

2009-07-01

Alberta Environment Water Management Operations (WMO) owns and operates 46 dams and 800 kilometres of canals in Alberta. The WMO consists of 120 staff and several contract operators to take care of this infrastructure. Most of the infrastructure supplies water for irrigation use, which adds 5 billion dollars to the provincial economy annually. Other water uses include stock watering, domestic use, municipal use, recreational use and habitat. Alberta Environment's weir safety program was also discussed along with options for rehabilitation to improve public safety. A case study of Calgary's Weir Dam on the Bow River was highlighted. A brief history of the dam was offered and safety programs around provincially-owned weirs were discussed. Photographs were included to illustrate some of the additional safety measures at the Calgary weir, such as suspended safety buoys upstream of the boom directing paddlers to the portage trail, and signage on the river that can be activated when the boom is out. Typical river users on the Calgary Bow River and safety history at the Calgary Weir were discussed along with other topics such as the Calgary Bow River weir project criteria; project design progress; pre-feasibility options; scale modelling; final design analysis; construction funding; and proposed changes to the safety program for the new weir configuration. figs.

Síndrome de Stevens-Johnson: Presentación de 1 caso

Directory of Open Access Journals (Sweden)

Luisa María Pacheco Álvarez

2001-12-01

Full Text Available El síndrome de Stevens-Johnson, es una enfermedad inflamatoria aguda, originada por una hipersensibilidad, que incluye la piel y las membranas mucosas; en una forma mayor pone en peligro la vida del paciente. Puede ser inducida por muchos factores precipitantes, desde los medicamentos hasta una infección. La afección se caracteriza por una súbita erupción morfológicamente variable, acompañada de estomatitis y oftalmia. En este trabajo se presenta un niño de 8 años de edad, con la entidad clínica en forma muy severa, el síndrome de Stevens-Johnson, que involucra manifestaciones cutáneas, oculares y de la mucosa oral, acompañada de otras complicaciones graves, por lo que requirió terapéutica en cuidados intensivos, y se logró una evolución satisfactoria del paciente.Stevens-Johnson syndrome is an acute inflammatory disease caused by a hypersensibility that includes the skin and the mucous membranes and that in a severe form endangers the patient’s life. It may be induced by many precipitating factors, from drugs to infection. The affection is characterized by a sudden morphologically variable rash, accompanied with stomatitis and ophthalmia. An 8-year-old boy suffering from this clinical entity in a very severe form, Stevens-Johnson syndrome, with skin , ocular and oral mucosa manifestations and with other serious complications, is presented in this paper. He had to be treated at the ICU and a satisfactory evolution was attained.

Bohunice Nuclear Power Plant Safety Upgrading Program

International Nuclear Information System (INIS)

Toth, A.; Fagula, L.

1996-01-01

Bohunice nuclear Power Plant generation represents almost 50% of the Slovak republic electric power production. Due to such high level of commitment to nuclear power in the power generation system, a special attention is given to safe and reliable operation of NPPs. Safety upgrading and operational reliability improvement of Bohunice V-1 NPP was carried out by the Bohunice staff continuously since the plant commissioning. In the 1990 - 1993 period extensive projects were realised. As a result of 'Small Reconstruction of the Bohunice V-1 NPP', the standards of both the nuclear safety and operational reliability have been significantly improved. The implementation of another modifications that will take place gradually during extended refuelling outages and overhauls in the course of 1996 through 1999, is referred to as the Gradual Reconstruction of the Bohunice V-1 Plant. The general goal of the V-1 NPP safety upgrading is the achievement of internationally acceptable level of nuclear safety. Extensive and financially demanding modification process of Bohunice V-2 NPP is likely to be implemented after a completion of the Gradual Reconstruction of the Bohunice V-1 NPP, since the year 1999. With this in mind, a first draft of the strategy of the Bohunice V-2 NPP upgrading program based on Probabilistic Safety assessment consideration was developed. A number of actions with a general effect on Bohunice site safety is evident. All these activities are aimed at reaching the essential objective of Bohunice NPP Management - to ensure a safe, reliable and effective electric energy and heat generation at the Bohunice site. (author)

Risk of nevirapine-associated Stevens-Johnson syndrome among ...

African Journals Online (AJOL)

Background. Stevens-Johnson syndrome (SJS) is an acute life-threatening condition often elicited by drugs. The government's indecisiveness in deciding to stop the use of nevirapine (NVP) in HIV-infected pregnant women owing to the increase of SJS among this population group in South Africa prompted this investigation ...

UMTRA project office federal employee occupational safety and health program plan

International Nuclear Information System (INIS)

1994-06-01

This document establishes the Federal Employee Occupational Safety and Health (FEOSH) Program for the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project Office. This program will ensure compliance with applicable requirements of DOE Order 3790.1B and DOE Albuquerque Operations Office (AL) Order 3790.lA. FEOSH Program responsibilities delegated by the DOE-AL to the UMTRA Project Office by AL Order 3790.1A also are assigned. The UMTRA Project Office has developed the UMTRA Project Environmental, Safety, and Health (ES ampersand H) Plan (DOE, 1992), which establishes the basic programmatic ES ampersand H requirements for all participants on the UMTRA Project. The ES ampersand H plan is designed primarily to cover remedial action activities at UMTRA sites and defines the ES ampersand H responsibilities of both the UMTRA Project Office and its contractors. The UMTRA FEOSH Program described herein is a subset of the overall UMTRA ES ampersand H program and covers only federal employees working on the UMTRA Project

Digital bedrock geologic map of the Johnson quadrangle, Vermont

Data.gov (United States)

Vermont Center for Geographic Information — Digital Data from VG98-2 Thompson, PJ�and Thompson, TB, 1998,�Digital bedrock geologic map of the Johnson quadrangle, Vermont: VGS Open-File Report VG98-2, 2 plates,...

Lean and Efficient Software: Whole Program Optimization of Executables

Science.gov (United States)

2016-12-31

19b. TELEPHONE NUMBER (Include area code) 12/31/2016 Final Technical Report (Phase I - Base Period) 30-06-2014 - 31-12-2016 Lean and Efficient...Software: Whole-Program Optimization of Executables Final Report Evan Driscoll Tom Johnson GrammaTech, Inc. 531 Esty Street Ithaca, NY 14850 Office of...hardening U U U UU 30 Tom Johnson (607) 273-7340 x.134 Page 1 of 30 “ Lean and Efficient Software: Whole-Program Optimization of Executables

A summary description of the flammable gas tank safety program

International Nuclear Information System (INIS)

Johnson, G.D.; Sherwood, D.J.

1994-10-01

Radioactive liquid waste may produce hydrogen as result of the interaction of gamma radiation and water. If the waste contains organic chelating agents, additional hydrogen as well as nitrous oxide and ammonia may be produced by thermal and radiolytic decomposition of these organics. Several high-level radioactive liquid waste storage tanks, located underground at the Hanford Site in Washington State, are on a Flammable Gas Watch List. Some contain waste that produces and retains gases until large quantities of gas are released rapidly to the tank vapor space. Tanks nearly-filled to capacity have relatively little vapor space; therefore if the waste suddenly releases a large amount of hydrogen and nitrous oxide, a flammable gas mixture could result. The most notable example of a Hanford waste tank with a flammable gas problem is tank 241-SY-101. Upon occasion waste stored in this tank has released enough flammable gas to burn if an ignition source had been present inside of the tank. Several, other Hanford waste tanks exhibit similar behavior although to a lesser magnitude. Because this behavior was hot adequately-addressed in safety analysis reports for the Hanford Tank Farms, an unreviewed safety question was declared, and in 1990 the Flammable Gas Tank Safety Program was established to address this problem. The purposes of the program are a follows: (1) Provide safety documents to fill gaps in the safety analysis reports, and (2) Resolve the safety issue by acquiring knowledge about gas retention and release from radioactive liquid waste and developing mitigation technology. This document provides the general logic and work activities required to resolve the unreviewed safety question and the safety issue of flammable gas mixtures in radioactive liquid waste storage tanks

Technical specification optimization program - engineered safety features

International Nuclear Information System (INIS)

Andre, G.R.; Jansen, R.L.

1986-01-01

The Westinghouse Technical Specification Program (TOP) was designed to evaluate on a quantitative basis revisions to Nuclear Power Plant Technical Specifications. The revisions are directed at simplifying plant operation, and reducing unnecessary transients, shutdowns, and manpower requirements. In conjunction with the Westinghouse Owners Group, Westinghouse initiated a program to develop a methodology to justify Technical Specification revisions; particularly revisions related to testing and maintenance requirements on plant operation for instrumentation systems. The methodology was originally developed and applied to the reactor trip features of the reactor protection system (RPS). The current study further refined the methodology and applied it to the engineered safety features of the RPS

78 FR 34428 - Missouri Central Railroad Company-Abandonment Exemption-in Cass, Henry, Johnson, and Pettis...

Science.gov (United States)

2013-06-07

... No. AB 1070; (Sub-No. 1X)] Missouri Central Railroad Company--Abandonment Exemption--in Cass, Henry, Johnson, and Pettis Counties, MO; Central Midland Railway Company--Discontinuance of Service Exemption--in Cass, Henry, Johnson, and Pettis Counties, MO Missouri Central Railroad Company (MCRR) and Central...

The Finite Strain Johnson Cook Plasticity and Damage Constitutive Model in ALEGRA.

Energy Technology Data Exchange (ETDEWEB)

Sanchez, Jason James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-02-01

A finite strain formulation of the Johnson Cook plasticity and damage model and it's numerical implementation into the ALEGRA code is presented. The goal of this work is to improve the predictive material failure capability of the Johnson Cook model. The new implementation consists of a coupling of damage and the stored elastic energy as well as the minimum failure strain criteria for spall included in the original model development. This effort establishes the necessary foundation for a thermodynamically consistent and complete continuum solid material model, for which all intensive properties derive from a common energy. The motivation for developing such a model is to improve upon ALEGRA's present combined model framework. Several applications of the new Johnson Cook implementation are presented. Deformation driven loading paths demonstrate the basic features of the new model formulation. Use of the model produces good comparisons with experimental Taylor impact data. Localized deformation leading to fragmentation is produced for expanding ring and exploding cylinder applications.

Torelli groups, extended Johnson homomorphisms, and new cycles on the moduli space of curves

DEFF Research Database (Denmark)

Morita, Shigeyuki; Penner, Robert

modulo N are derived for all N. Furthermore, the first Johnson homomorphism, which is defined from the classical Torelli group to the third exterior power of the homology of the surface, is shown to lift to an explicit canonical 1-cocycle of the Teichmueller space. The main tool for these results...... cocycle lifts of the higher Johnson homomorphisms....

Supplemental site inspection for Air Force Plant 59, Johnson City, New York, Volume 3: Appendices F-Q

Energy Technology Data Exchange (ETDEWEB)

Nashold, B.; Rosenblatt, D.; Hau, J. [and others

1995-08-01

This summary describes a Supplemental Site Inspection (SSI) conducted by Argonne National Laboratory (ANL) at Air Force Plant 59 (AFP 59) in Johnson City, New York. All required data pertaining to this project were entered by ANL into the Air Force-wide Installation Restoration Program Information System (IRPIMS) computer format and submitted to an appropriate authority. The work was sponsored by the United States Air Force as part of its Installation Restoration Program (IRP). Previous studies had revealed the presence of contaminants at the site and identified several potential contaminant sources. Argonne`s study was conducted to answer questions raised by earlier investigations. This volume consists of appendices F-Q, which contain the analytical data from the site characterization.

IMPLEMENTATION OF A SAFETY PROGRAM FOR THE WORK ACCIDENTS’ CONTROL. A CASE STUDY IN THE CHEMICAL INDUSTRY

Directory of Open Access Journals (Sweden)

Edison Cesar de Faria Nogueira

2015-03-01

Full Text Available This article presents a case study related to the implementation of a Work Safety Program in a chemical industry, based on the Process Safety Program, PSP, of a huge energy company. The research was applied, exploratory, qualitative and with and data collection method through documentary and bibliographical research. There will be presented the main practices adopted in order to make the Safety Program a reality inside a chemical industry, its results and contributions for its better development. This paper proposes the implementation of a Safety Program must be preceded by a diagnosis of occupational safety and health management system and with constant critical analysis in order to make the necessary adjustments.

The Role and Quality of Software Safety in the NASA Constellation Program

Science.gov (United States)

Layman, Lucas; Basili, Victor R.; Zelkowitz, Marvin V.

2010-01-01

In this study, we examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Obtaining an accurate, program-wide picture of software safety risk is difficult across multiple, independently-developing systems. We leverage one source of safety information, hazard analysis, to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. The goal of this research is two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to quantify the level of risk presented by software in the hazard analysis. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. To quantify the importance of software, we collected metrics based on the number of software-related causes and controls of hazardous conditions. To quantify the level of risk presented by software, we created a metric scheme to measure the specificity of these software causes. We found that from 49-70% of hazardous conditions in the three systems could be caused by software or software was involved in the prevention of the hazardous condition. We also found that 12-17% of the 2013 hazard causes involved software, and that 23-29% of all causes had a software control. Furthermore, 10-12% of all controls were software-based. There is potential for inaccuracy in these counts, however, as software causes are not consistently scoped, and the presence of software in a cause or control is not always clear. The application of our software specificity metrics also identified risks in the hazard reporting process. In particular, we found a number of traceability risks in the hazard reports may impede verification of software and system safety.

Lyndon Baines Johnson signs the Wilderness Act into law

Science.gov (United States)

Susan A. Fox

2016-01-01

President Lyndon Baines Johnson signed the Wilderness Act into law on Sept. 3, 1964. In this photo, LBJ hands the pen he used to Alice Zahniser while naturalist, author, adventurer, and conservationist Mardy Murie (standing behind her) looks on.

Evaluation of the League General Insurance Company child safety seat distribution program

Science.gov (United States)

1982-05-01

This report presents an evaluation of the child safety seat distribution initiated by the League General Insurance Company in June 1979. The program provides child safety seats as a benefit under the company's auto insurance policies to policy-holder...

Analyzing and strengthening the vaccine safety program in Manitoba

Science.gov (United States)

Montalban, JM; Ogbuneke, C; Hilderman, T

2014-01-01

Background: The emergence of a novel influenza A virus in 2009 and the rapid introduction of new pandemic vaccines prompted an analysis of the current state of the adverse events following immunization (AEFI) surveillance response in several provinces. Objectives To highlight aspects of the situational analysis of the Manitoba Health, Healthy Living and Seniors (MHHLS’s) AEFI surveillance system and to demonstrate how common business techniques could be usefully applied to a provincial vaccine safety monitoring program. Method Situational analysis of the AEFI surveillance system in Manitoba was developed through a strengths-weaknesses-opportunities-threats (SWOT) analysis and informed by the National Immunization Strategy vaccine safety priorities. Strategy formulation was developed by applying the threats-opportunities-weaknesses-strengths (TOWS) matrix. Results Thirteen strategies were formulated that use strengths to either take advantage of opportunities or avoid threats, that exploit opportunities to overcome weaknesses, or that rectify weaknesses to circumvent threats. These strategies entailed the development of various tools and resources, most of which are either actively underway or completed. Conclusion The SWOT analysis and the TOWS matrix enabled MHHLS to enhance the capacity of its vaccine safety program. PMID:29769910

[Evaluating training programs on occupational health and safety: questionnaire development].

Science.gov (United States)

Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

2006-03-01

To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

Fusion Reactor Safety Research program. Annual report, FY-80

International Nuclear Information System (INIS)

Crocker, J.G.; Cohen, S.

1981-06-01

The report is in three sections. Outside contracts includes a report of newly-started study at the General Atomic Company to consider safety implications of low-activation materials, portions of two papers from ongoing work at PNL and ANL, reports of the lithium spill work at HEDL, the LITFIRE code development at MIT, and risk assessment at MIT, all of which are an expansion of FY-79 outside contracts. EG and G Activities includes adaptations of four papers of ongoing work in transient code development, tritium system risk assessment, heat transfer and fluid flow analysis, and fusion safety data base. Program Plan Development includes the Executive Summary of the Plan, which was completed in FY-80, and is accompanied by a list of publications and a brief outline of proposed FY-81 activities to be based on the Program Plan

From Safety Critical Java Programs to Timed Process Models

DEFF Research Database (Denmark)

Thomsen, Bent; Luckow, Kasper Søe; Thomsen, Lone Leth

2015-01-01

frameworks, we have in recent years pursued an agenda of translating hard-real-time embedded safety critical programs written in the Safety Critical Java Profile [33] into networks of timed automata [4] and subjecting those to automated analysis using the UPPAAL model checker [10]. Several tools have been...... built and the tools have been used to analyse a number of systems for properties such as worst case execution time, schedulability and energy optimization [12–14,19,34,36,38]. In this paper we will elaborate on the theoretical underpinning of the translation from Java programs to timed automata models...... and briefly summarize some of the results based on this translation. Furthermore, we discuss future work, especially relations to the work in [16,24] as Java recently has adopted first class higher order functions in the form of lambda abstractions....

Modernization of NASA's Johnson Space Center Chamber: A Payload Transport Rail System to Support Cryogenic Vacuum Optical Testing of the James Webb Space Telescope (JWST)

Science.gov (United States)

Garcia, Sam; Homan, Jonathan; Speed, John

2016-01-01

NASA is the mission lead for the James Webb Space Telescope (JWST), the next of the "Great Observatories", scheduled for launch in 2018. It is directly responsible for the integration and test (I&T) program that will culminate in an end-to-end cryo vacuum optical test of the flight telescope and instrument module in Chamber A at NASA Johnson Space Center. Historic Chamber A is the largest thermal vacuum chamber at Johnson Space Center and one of the largest space simulation chambers in the world. Chamber A has undergone a major modernization effort to support the deep cryogenic, vacuum and cleanliness requirements for testing the JWST. This paper describe the challenges of developing, integrating and modifying new payload rails capable of transporting payloads within the thermal vacuum chamber up to 65,000 pounds. Ambient and Cryogenic Operations required to configure for testing will be explained. Lastly review historical payload configurations stretching from the Apollo program era to current James Webb Space Telescope testing.

Development of high frequency and wide bandwidth Johnson noise thermometry

International Nuclear Information System (INIS)

Crossno, Jesse; Liu, Xiaomeng; Kim, Philip; Ohki, Thomas A.; Fong, Kin Chung

2015-01-01

We develop a high frequency, wide bandwidth radiometer operating at room temperature, which augments the traditional technique of Johnson noise thermometry for nanoscale thermal transport studies. Employing low noise amplifiers and an analog multiplier operating at 2 GHz, auto- and cross-correlated Johnson noise measurements are performed in the temperature range of 3 to 300 K, achieving a sensitivity of 5.5 mK (110 ppm) in 1 s of integration time. This setup allows us to measure the thermal conductance of a boron nitride encapsulated monolayer graphene device over a wide temperature range. Our data show a high power law (T ∼ 4) deviation from the Wiedemann-Franz law above T ∼ 100 K

Evaluation of conjunctival bacterial flora in patients with Stevens-Johnson Syndrome

Directory of Open Access Journals (Sweden)

Luciana Frizon

2014-03-01

Full Text Available OBJECTIVE: To determine the conjunctival bacterial flora present in patients with Stevens-Johnson syndrome. METHODS: A prospective study of the conjunctival bacterial flora was performed in 41 eyes of 22 patients with Stevens-Johnson syndrome. The information gathered included the patient's sex and age, the duration of disease, the cause of Stevens-Johnson syndrome, and treatments. Scrapings of the inferior conjunctival fornix were performed in both eyes. Fourteen days before scraping, the patients were asked to interrupt all topical medication and start using 0.5% nonpreserved methylcellulose. The microbiological evaluation included microorganism identification and determination of antibiotic sensitivity. RESULTS: Of 22 patients (41 eyes, 14 (64% were females, and eight (36% were males. The mean age was 33.2 years, and the mean duration of disease was 15.6 years. Visual acuity ranged from light perception to 20/25 (1.57 logMar. The treatment received by most patients consisted of tear substitutes, topical antibiotics, and contact lenses. Bacterial identification was positive in 39 eyes (95% and negative in two eyes (5%. Gram-positive cocci accounted for 55.5% of the microorganisms, whereas gram-positive bacilli and gram-negative bacilli accounted for 19% and 25.5%, respectively. Half of the patients (54% had multiple bacterial species in their flora, and only one bacterial species was identified in the other half. Resistant bacteria were isolated from four eyes. The antibiotic sensitivity results for the Streptococcus group showed the lowest sensitivity and the highest microbial resistance identified. CONCLUSION: Patients with Stevens-Johnson syndrome have a diverse conjunctival flora that includes many pathogenic species.

Safety analysis report for packaging (onsite) transuranic performance demonstration program sample packaging

International Nuclear Information System (INIS)

Mccoy, J.C.

1997-01-01

The Transuranic Performance Demonstration Program (TPDP) sample packaging is used to transport highway route controlled quantities of weapons grade (WG) plutonium samples from the Plutonium Finishing Plant (PFP) to the Waste Receiving and Processing (WRAP) facility and back. The purpose of these shipments is to test the nondestructive assay equipment in the WRAP facility as part of the Nondestructive Waste Assay PDP. The PDP is part of the U. S. Department of Energy (DOE) National TRU Program managed by the U. S. Department of Energy, Carlsbad Area Office, Carlsbad, New Mexico. Details of this program are found in CAO-94-1045, Performance Demonstration Program Plan for Nondestructive Assay for the TRU Waste Characterization Program (CAO 1994); INEL-96/0129, Design of Benign Matrix Drums for the Non-Destructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996a); and INEL-96/0245, Design of Phase 1 Radioactive Working Reference Materials for the Nondestructive Assay Performance Demonstration Program for the National TRU Program (INEL 1996b). Other program documentation is maintained by the national TRU program and each DOE site participating in the program. This safety analysis report for packaging (SARP) provides the analyses and evaluations necessary to demonstrate that the TRU PDP sample packaging meets the onsite transportation safety requirements of WHC-CM-2-14, Hazardous Material Packaging and Shipping, for an onsite Transportation Hazard Indicator (THI) 2 packaging. This SARP, however, does not include evaluation of any operations within the PFP or WRAP facilities, including handling, maintenance, storage, or operating requirements, except as they apply directly to transportation between the gate of PFP and the gate of the WRAP facility. All other activities are subject to the requirements of the facility safety analysis reports (FSAR) of the PFP or WRAP facility and requirements of the PDP

DOE high-level waste tank safety program Final report, Task 002

International Nuclear Information System (INIS)

1998-01-01

The overall objective of the work on Task 002 was to provide LANL with support to the DOE High-Level Waste Tank Safety program. The objective of the work was to develop safety documentation in support of the unsafe tank mitigation activities at Hanford. The work includes the development of safety assessment and an environmental assessment. All tasks which were assigned under this Task Order were completed. Descriptions of the objectives of each task and effort performed to complete each objective are provided. The two tasks were: Task 2.1--safety assessment for instrumentation insertion; and Task 2.2--environmental assessment

Seismic Safety Margins Research Program: a concluding look

International Nuclear Information System (INIS)

Cummings, G.E.

1984-01-01

The Seismic Safety Margins Research Program (SSMRP) was started in 1978 with the goal of developing tools and data bases to compute the probability of earthquake - caused radioactive release from commercial nuclear power plants. These tools and data bases were to help NRC to assess seismic safety at nuclear plants. The methodology to be used was finalized in 1982 and applied to the Zion Nuclear Power Station. The SSMRP will be completed this year with the development of a more simplified method of analysis and a demonstration of its use on Zion. This simplified method is also being applied to a boiling-water-reactor, LaSalle

Quarterly report on the Ferrocyanide Safety Program for the period ending June 30, 1995

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-07-01

This is the seventeenth quarterly report on the progress of activities addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six pans of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented

Liquefied gaseous fuels safety and environmental control assessment program: third status report

Energy Technology Data Exchange (ETDEWEB)

1982-03-01

This Status Report contains contributions from all contractors currently participating in the DOE Liquefied Gaseous Fuels (LG) Safety and Environmental Control Assessment Program and is presented in two principal sections. Section I is an Executive Summary of work done by all program participants. Section II is a presentation of fourteen individual reports (A through N) on specific LGF Program activities. The emphasis of Section II is on research conducted by Lawrence Livermore National Laboratory (Reports A through M). Report N, an annotated bibliography of literature related to LNG safety and environmental control, was prepared by Pacific Northwest Laboratory (PNL) as part of its LGF Safety Studies Project. Other organizations who contributed to this Status Report are Aerojet Energy Conversion Company; Applied Technology Corporation; Arthur D. Little, Incorporated; C/sub v/ International, Incorporated; Institute of Gas Technology; and Massachusetts Institute of Technology. Separate abstracts have been prepared for Reports A through N for inclusion in the Energy Data Base.

EUMENES, a computer software for managing the radiation safety program information at an institutional level

International Nuclear Information System (INIS)

Hernandez Saiz, Alejandro; Cornejo Diaz, Nestor; Valdes Ramos, Maryzury; Martinez Gonzalez, Alina; Gonzalez Rodriguez, Niurka; Vergara Gil, Alex

2008-01-01

The correct application of national and international regulations in the field of Radiological Safety requires the implementation of Radiation Safety Programs appropriate to the developed practice. These Programs demand the preparation and keeping of an important number of records and data, the compliance with working schedules, systematic quality controls, audits, delivery of information to the Regulatory Authority, the execution of radiological assessments, etc. Therefore, it is unquestionable the necessity and importance of having a computer tool to support the management of the information related to the Radiation Safety Program in any institution. The present work describes a computer program that allows the efficient management of these data. Its design was based on the IAEA International Basic Safety Standards recommendations and on the requirements of the Cuban national standards, with the objective of being flexible enough to be applied in most of the institutions using ionizing radiations. The most important records of Radiation Safety Programs were incorporated and reports can be generated by the users. An additional tools-module allows the user to access to a radionuclide data library, and to carry out different calculations of interest in radiological protection. The program has been developed in Borland Delphi and manages Microsoft Access databases. It is a user friendly code that aims to support the optimization of Radiation Safety Programs. The program contributes to save resources and time, as the generated information is electronically kept and transmitted. The code has different security access levels according to the user responsibility at the institution and also provides for the analysis of the introduced data, in a quick and efficient way, as well as to notice deadlines, the exceeding of reference levels and situations that require attention. (author)

Development of computer program for safety of nuclear power plant against tsunami

International Nuclear Information System (INIS)

Jin, S. B.; Choi, K. R.; Lee, S. K.; Cho, Y. S.

2001-01-01

The main objective of this study is the development of a computer program to check the safety of nuclear power plants along the coastline of the Korean Peninsula. The computer program describes the propagation and associated run-up process of tsunamis by solving linear and nonlinear shallow-water equations with finite difference methods. The computer program has been applied to several ideal and simplified problems. Obtained numerical solutions are compared to existing and available solutions and measurements. A very good agreement between numerical solutions and existing measurement is observed. The computer program developed in this study can be to check the safety analysis of nuclear power plants against tsunamis. The program can also be used to study the propagation of tsunamis for a long distance, and associated run-up and run-down process along a shoreline. Furthermore, the computer program can be used to provide the proper design criteria of coastal facilities and structures

The association between event learning and continuous quality improvement programs and culture of patient safety.

Science.gov (United States)

Mazur, Lukasz; Chera, Bhishamjit; Mosaly, Prithima; Taylor, Kinley; Tracton, Gregg; Johnson, Kendra; Comitz, Elizabeth; Adams, Robert; Pooya, Pegah; Ivy, Julie; Rockwell, John; Marks, Lawrence B

2015-01-01

To present our approach and results from our quality and safety program and to report their possible impact on our culture of patient safety. We created an event learning system (termed a "good catch" program) and encouraged staff to report any quality or safety concerns in real time. Events were analyzed to assess the utility of safety barriers. A formal continuous quality improvement program was created to address these reported events and make improvements. Data on perceptions of the culture of patient safety were collected using the Agency for Health Care Research and Quality survey administered before, during, and after the initiatives. Of 560 good catches reported, 367 could be ascribed to a specific step on our process map. The calculated utility of safety barriers was highest for those embedded into the pretreatment quality assurance checks performed by physicists and dosimetrists (utility score 0.53; 93 of 174) and routine checks done by therapists on the initial day of therapy. Therapists and physicists reported the highest number of good catches (24% each). Sixty-four percent of events were caused by performance issues (eg, not following standardized processes, including suboptimal communications). Of 31 initiated formal improvement events, 26 were successfully implemented and sustained, 4 were discontinued, and 1 was not implemented. Most of the continuous quality improvement program was conducted by nurses (14) and therapists (7). Percentages of positive responses in the patient safety culture survey appear to have increased on all dimensions (p continuous quality improvement programs can be successfully implemented and that there are contemporaneous improvements in the culture of safety. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Nuclear data needs within the U. S. Nuclear Criticality Safety program

International Nuclear Information System (INIS)

McKnight, R.D.; Dunn, M.E.; Little, R.C.; Felty, J.R.; McKamy, J.N.

2008-01-01

This paper will present the nuclear data needs currently identified within the US Nuclear Criticality Safety Program (NCSP). It will identify the priority data needs; it will describe the process of prioritizing those needs; and it will provide brief examples of recent data advances which have successfully addressed some of the priority criticality safety data needs.

Food Safety Programs Based on HACCP Principles in School Nutrition Programs: Implementation Status and Factors Related to Implementation

Science.gov (United States)

Stinson, Wendy Bounds; Carr, Deborah; Nettles, Mary Frances; Johnson, James T.

2011-01-01

Purpose/Objectives: The objectives of this study were to assess the extent to which school nutrition (SN) programs have implemented food safety programs based on Hazard Analysis and Critical Control Point (HACCP) principles, as well as factors, barriers, and practices related to implementation of these programs. Methods: An online survey was…

MHD peristaltic motion of Johnson-Segalman fluid in a channel with compliant walls

International Nuclear Information System (INIS)

Hayat, T.; Javed, Maryiam; Asghar, S.

2008-01-01

A mathematical model for magnetohydrodynamic (MHD) flow of a Johnson-Segalman fluid in a channel with compliant walls is analyzed. The flow is engendered due to sinusoidal waves on the channel walls. A series solution is developed for the case in which the amplitude ratio is small. Our computations show that the mean axial velocity of a Johnson-Segalman fluid is smaller than that of a viscous fluid. The variations of various interesting dimensionless parameters are graphed and discussed

Risk Perceptions That Effect Behavior and Attitudes in Safety Programs

Science.gov (United States)

2004-01-01

Turner, B.A. (1978), Man-made Disasters. London, Wykeham. Van Manen , Max. 1990. Reasearching lived experience: Human Science for an Action Sensitive Pedagogy. New York: State University of New York. ...question guided the study: (1) what factors determine a successful safety program? METHOD In my approach I used Phenomenological inquiry...method employed tried to capture the “essence” of lived experiences, which may have an impact on aviation safety. In Max Van Manen’s book

Bronchiolitis obliterans in children with Stevens-Johnson syndrome: follow-up with high resolution CT

International Nuclear Information System (INIS)

Kim, M.J.; Lee, K.Y.

1996-01-01

About one third of children with Stevens-Johnson syndrome have pulmonary involvement. As a consequence of airway epithelial injury, bronchiolitis obliterans can occur in these patients. Two cases of Stevens-Johnson syndrome-associated bronchiolitis obliterans in children were diagnosed and followed by high resolution CT without open lung biopsy. Serial changes of high resolution CT features of bronchiolitis obliterans are discussed and the literature is reviewed. (orig.)

Space Nuclear Safety Program. Progress report, March 1984

International Nuclear Information System (INIS)

Zocher, R.W.; George, T.G.

1985-08-01

This technical monthly report covers studies related to the use of 238 PuO 2 in radioisotope power systems carried out for the Office of Special Nuclear Projects of the US Department of Energy by Los Alamos Laboratory. They are divided into: general-purpose heat source, lightweight radioisotope heater unit, and safety technology program. 43 figs., 2 tabs

Safety program of the Oak Ridge National Laboratory: a different approach

International Nuclear Information System (INIS)

Burger, G.H.

1981-01-01

The uniqueness and therefore different approach to Oak Ridge National Laboratory's safety program is not a result of elimination of the usual industrial safety organization, but results from the three organizations which supplement it and the areas of safety concerns that they cover. While industrial safety is primarily concerned with day-to-day routine worker activities (wearing of safety glasses and hard hats, adherence to electrical safety work procedures, proper safety lockout and tagout of equipment for maintenance activities, etc.), the other organizations, the Office of Operational Safety, Division Safety Officers and Radiation Control Officers, and the Laboratory director's Review Committees, are concerned with themuch broader spectrum of the total work environment. These organizations are concerned not only with the day-to-day worker activities but the design and conduction of all operations from a process viewpoint. The emphasis of these groups is assuring first that operations, experiments, facilities, etc., are designed properly and then secondly operated properly to assure safety of the operators, Laboratory population, and the public. Responsibilities of the three safety organizations constituting operational or process safety are described and discussed

Diversity dynamics: The experience of male Robert Wood Johnson Foundation nurse faculty scholars.

Science.gov (United States)

Brody, Abraham A; Farley, Jason E; Gillespie, Gordon L; Hickman, Ronald; Hodges, Eric A; Lyder, Courtney; Palazzo, Steven J; Ruppar, Todd; Schiavenato, Martin; Pesut, Daniel J

Managing diversity dynamics in academic or clinical settings for men in nursing has unique challenges resulting from their minority status within the profession. The purpose of this study was to share challenges and lessons learned identified by male scholars in the Robert Wood Johnson Foundation Nurse Faculty Scholars program and suggest strategies for creating positive organizations promoting inclusive excellence. Multiple strategies including informal mentored discussions and peer-to-peer dialogue throughout the program, formal online surveys of scholars and National Advisory Committee members, and review of scholar progress reports were analyzed as part of the comprehensive evaluation plan of the program. Diversity dynamic issues include concerns with negative stereotyping, microaggression, gender intelligence, and differences in communication and leadership styles. Male nurse faculty scholars report experiencing both opportunities and challenges residing in a predominately female profession. This article attempts to raise awareness and suggest strategies to manage diversity dynamics in service of promoting the development of a culture of health that values diversity and inclusive excellence for both men and women in academic, research, and practice contexts. Copyright © 2017 Elsevier Inc. All rights reserved.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

Energy Technology Data Exchange (ETDEWEB)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

International Nuclear Information System (INIS)

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE's overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program

Electrical Safety Program: Nonelectrical Crafts at LANL, Live #12175

Energy Technology Data Exchange (ETDEWEB)

Glass, George [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-12-22

Los Alamos National Laboratory (LANL) and the federal government require those working with or near electrical equipment to be trained on electrical hazards and how to avoid them. Although you might not be trained to work on electrical systems, your understanding of electricity, how it can hurt you, and what precautions to take when working near electricity could save you or others from injury or death. This course, Electrical Safety Program: Nonelectrical Crafts at LANL (12175), provides knowledge of basic electrical concepts, such as current, voltage, and resistance, and their relationship to each other. You will learn how to apply these concepts to safe work practices while learning about the dangers of electricity—and associated hazards—that you may encounter on the job. The course also discusses what you can do to prevent electrical accidents and what you should do in the event of an electrical emergency. The LANL Electrical Safety Program is defined by LANL Procedure (P) 101-13. An electrical safety officer (ESO) is well versed in this document and should be consulted regarding electrical questions. Appointed by the responsible line manager (RLM), ESOs can tell you if a piece of equipment or an operation is safe or how to make it safe.

Waste isolation safety assessment program

International Nuclear Information System (INIS)

Brandstetter, A.; Harwell, M.A.

1979-05-01

Associated with commercial nuclear power production in the United States is the generation of potentially hazardous radioactive wastes. The Department of Energy (DOE), through the National Waste Terminal Storage (NWTS) Program, is seeking to develop nuclear waste isolation systems in geologic formations that will preclude contact with the biosphere of waste radionuclides in concentrations which are sufficient to cause deleterious impact on humans or their environments. Comprehensive analyses of specific isolation systems are needed to assess the expectations of meeting that objective. The Waste Isolation Safety Assessment Program (WISAP) has been established at the Pacific Northwest Laboratory (operated by Battelle Memorial Institute) for developing the capability of making those analyses. Among the analyses required for isolation system evaluation is the detailed assessment of the post-closure performance of nuclear waste repositories in geologic formations. This assessment is essential, since it is concerned with aspects of the nuclear power program which previously have not been addressed. Specifically, the nature of the isolation systems (e.g., involving breach scenarios and transport through the geosphere), and the time-scales necessary for isolation, dictate the development, demonstration and application of novel assessment capabilities. The assessment methodology needs to be thorough, flexible, objective, and scientifically defensible. Further, the data utilized must be accurate, documented, reproducible, and based on sound scientific principles

System safety program plan for the Isotope Brayton Ground Demonstration System (phase I)

International Nuclear Information System (INIS)

1976-01-01

The safety engineering effort to be undertaken in achieving an acceptable level of safety in the Brayton Isotope Power System (BIPS) development program is discussed. The safety organizational relationships, the methods to be used, the tasks to be completed, and the documentation to be published are described. The plan will be updated periodically as the need arises

Development of a safety and regulation systems simulation program II

International Nuclear Information System (INIS)

1985-05-01

This report describes the development of a safety and regulation systems simulation program under contract to the Atomic Energy Control Board of Canada. A systems logic interaction simulation (SLISIM) program was developed for the AECB's HP-1000 computer which operates in the interactive simulation (INSIM) program environment. The SLISIM program simulates the spatial neutron dynamics, the regulation of the reactor power and in this version the CANDU-PHW 600 MW(e) computerized shutdown systems' trip parameters. The modular concept and interactive capability of the INSIM environment provides the user with considerable flexibility of the setup and control of the simulation

Nuclear criticality safety program at the University of Tennessee-Knoxville

International Nuclear Information System (INIS)

Basoglu, B.; Bentley, C.; Brewer, R.; Dunn, M.; Haught, C.; Plaster, M.; Wilkinson, A.; Dodds, H.; Elliott, E.; Waddell, W.

1993-01-01

This paper presents an overview of the nuclear criticality safety (NCS) educational program at the University of Tennessee-Knoxville. The program is an academic specialization for nuclear engineering graduate students pursuing either the MS or PhD degree and includes special NCS courses and NCS research projects. Both the courses and the research projects serve as partial fulfillment of the requirements for the degree being pursued

Road Bridges and Culverts, Bridge dataset only includes bridges maintained by Johnson County Public Works in the unincorporated areas, Published in Not Provided, Johnson County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Road Bridges and Culverts dataset current as of unknown. Bridge dataset only includes bridges maintained by Johnson County Public Works in the unincorporated areas.

Security for safety critical space borne systems

Science.gov (United States)

Legrand, Sue

1987-01-01

The Space Station contains safety critical computer software components in systems that can affect life and vital property. These components require a multilevel secure system that provides dynamic access control of the data and processes involved. A study is under way to define requirements for a security model providing access control through level B3 of the Orange Book. The model will be prototyped at NASA-Johnson Space Center.

The Nordic nuclear safety program 1994-1997. Project handbook

International Nuclear Information System (INIS)

1997-06-01

This is a new revision of the handbook for administrators of the Nordic reactor safety program NKS. The most important administrative functions in project management are described, which should secure a uniform management approach in all the projects. The description of the organizational scheme of the NKS and distribution of responsibilities is followed by examples of various administrative routines and document forms. In the annex the names and addresses of the staff involved in administration of the NKS program are listed. (EG)

Phenobarbital induced Stevens–Johnson syndrome in a child

OpenAIRE

Gaur, Sumit; Agnihotri, Rupali

2012-01-01

Phenobarbital, an antiepileptic agent has numerous adverse reactions including Stevens- Johnson syndrome (SJS), a rare medical emergency. A 12-year-old male epileptic child with phenobarbital-induced SJS was referred for the management of severe pain in relation to extensively decayed molar tooth and oral mucosal ulcerations. The patient was managed by withdrawal of phenobarbital and palliative treatment of the lesions.

Finite Yang-Mills theories and the Bjorken--Johnson--Low limit

International Nuclear Information System (INIS)

Ali, A.; Bernstein, J.

1975-01-01

We consider the Bjorken-Johnson-Low limit for the propagator in massless Yang-Mills theories. The significance of our result in terms of imposing an eigenvalue on the theory so as to render it finite is discussed

An augmented audit program for assuring radiation safety during radiographic examination operations

International Nuclear Information System (INIS)

Jervey, R.A. Jr.; Papin, P.J.

1993-01-01

Auditing a gamma radiography program is required as part of the authorizing license. Checklists and cursory reviews are the typical approach to addressing program requirements. A more proactive approach is recommended. The audit program described was prepared for a specific set of operating conditions but can be applied to any given program. Improvements in the effectiveness of the radiography safety program can be made with additional examination and emphasis on direct observation of licensed activities

75 FR 5244 - Pipeline Safety: Integrity Management Program for Gas Distribution Pipelines; Correction

Science.gov (United States)

2010-02-02

... Management Program for Gas Distribution Pipelines; Correction AGENCY: Pipeline and Hazardous Materials Safety... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Regulations to require operators of gas distribution pipelines to develop and implement integrity management...

Preliminary Performance Analysis Program Development for Safety System with Safeguard Vessel

International Nuclear Information System (INIS)

Kang, Han-Ok; Lee, Jun; Park, Cheon-Tae; Yoon, Ju-Hyeon; Park, Keun-Bae

2007-01-01

SMART is an advanced modular integral type pressurized water reactor for a seawater desalination and an electricity production. Major components of the reactor coolant system such as the pressurizer, Reactor Coolant Pump (RCP), and steam generators are located inside the reactor vessel. The SMART can fundamentally eliminate the possibility of large break loss of coolant accidents (LBLOCAs), improve the natural circulation capability, and better accommodate and thus enhance a resistance to a wide range of transients and accidents. The safety goals of the SMART are enhanced through highly reliable safety systems such as the passive residual heat removal system (PRHRS) and the safeguard vessel coupled with the passive safety injection feature. The safeguard vessel is a steel-made, leak-tight pressure vessel housing the RPV, SIT, and the associated valves and pipelines. A primary function of the safeguard vessel is to confine any radioactive release from the primary circuit within the vessel under DBAs related to loss of the integrity of the primary system. A preliminary performance analysis program for a safety system using the safeguard vessel is developed in this study. The developed program is composed of several subroutines for the reactor coolant system, passive safety injection system, safeguard vessel including the pressure suppression pool, and PRHRS. A small break loss of coolant accident at the upper part of a reactor is analyzed and the results are discussed

1986 international meeting of nuclear reactor safety committees

International Nuclear Information System (INIS)

Moeller, D.W.

1987-01-01

During the week of Oct. 20-23, 1986, nuclear power-plant safety representatives from the Federal Republic of Germany (FRG), France, Japan, and the US assembled to discuss subjects of mutual interest. The meeting, the first of its kind, was organized under the leadership and direction of David A. Ward, Chairman, Advisory Committee on Reactor Safeguards, US Nuclear Regulatory Commission (NRC), and held at the Wingspread Conference Center of the Johnson Foundation in Racine, Wis. Approximately 40 representatives of the several countries attended. Discussions were candid and provided the participants an opportunity to share thoughts and information on nuclear safety concerns and solutions

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

International Nuclear Information System (INIS)

Dey, M.

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission's Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements

Workshop on Program for Elimination of Requirements Marginal to Safety: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Dey, M. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Safety Issue Resolution; Arsenault, F.; Patterson, M.; Gaal, M. [SCIENTECH, Inc., Rockville, MD (United States)

1993-09-01

These are the proceedings of the Public Workshop on the US Nuclear Regulatory Commission`s Program for Elimination of Requirements Marginal to Safety. The workshop was held at the Holiday Inn, Bethesda, on April 27 and 28, 1993. The purpose of the workshop was to provide an opportunity for public and industry input to the program. The workshop addressed the institutionalization of the program to review regulations with the purpose of eliminating those that are marginal. The objective is to avoid the dilution of safety efforts. One session was devoted to discussion of the framework for a performance-based regulatory approach. In addition, panelists and attendees discussed scope, schedules and status of specific regulatory items: containment leakage testing requirements, fire protection requirements, requirements for environmental qualification of electrical equipment, requests for information under 10CFR50.54(f), requirements for combustible gas control systems, and quality assurance requirements.

Fusion Safety Program annual report, fiscal year 1983

International Nuclear Information System (INIS)

Crocker, J.G.; Holland, D.F.

1984-07-01

The Fusion Safety Program major activities for Fiscal Year 1983 are summarized in this report. The program was initiated in FY 1979, with the Idaho National Engineering Laboratory (INEL) designated lead laboratory, and EG and G Idaho, inc., named as prime contractor to implement this role. The report contains four sections: EG and G Idaho, Inc., activities at the INEL includes progress reports and portions of papers on the tritium implantation experiment, tritium control systems, tritium release from solid breeding blankets, plasma disruptions, risk assessment, transient code development, data base development, and a discussion of participation in the blanket comparison and selection study. The section outside contracts includes progress reports and portions of papers on lithium-lead reactions by Hanford Engineering Development Laboratory (HEDL) and the University of Wisconsin, magnet safety by the Francis Bitter Magnet Laboratory of the Massachusetts Institute of Technology (MIT) and Argonne National Laboratory (ANL), risk assessment by the University of California at Los Angeles (UCLA) and MIT, tritium retention by the University of Virginia, and effects of plasma disruptions by MIT. A list of publications and planned fiscal year 1984 activities are also included

James Weldon Johnson and the Speech Lab Recordings

Directory of Open Access Journals (Sweden)

Chris Mustazza

2016-03-01

Full Text Available On December 24, 1935, James Weldon Johnson read thirteen of his poems at Columbia University, in a recording session engineered by Columbia Professor of Speech George W. Hibbitt and Barnard colleague Professor W. Cabell Greet, pioneers in the field that became sociolinguistics. Interested in American dialects, Greet and Hibbitt used early sound recording technologies to preserve dialect samples. In the same lab where they recorded T.S. Eliot, Gertrude Stein, and others, James Weldon Johnson read a selection of poems that included several from his seminal collection God’s Trombones and some dialect poems. Mustazza has digitized these and made them publicly available in the PennSound archive. In this essay, Mustazza contextualizes the collection, considering the recordings as sonic inscriptions alongside their textual manifestations. He argues that the collection must be heard within the frames of its production conditions—especially its recording in a speech lab—and that the sound recordings are essential elements in an hermeneutic analysis of the poems. He reasons that the poems’ original topics are reframed and refocused when historicized and contextualized within the frame of The Speech Lab Recordings.

Quarterly report on the ferrocyanide safety program for the period ending December 31, 1994

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-01-01

This is the fifteenth quarterly report on the progress of active addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six parts of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented in Section 1.2. More detailed discussions of progress are located in Sections 2.0 through 4.0. 60 refs

Quarterly report on the Ferrocyanide Safety Program for the period ending September 30, 1995

International Nuclear Information System (INIS)

Meacham, J.E.; Cash, R.J.; Dukelow, G.T.

1995-10-01

This is the eighteenth quarterly report on the progress of activities addressing the Ferrocyanide Safety Issue associated with Hanford Site high-level radioactive waste tanks. Progress in the Ferrocyanide Safety Program is reviewed, including work addressing the six parts of Defense Nuclear Facilities Safety Board Recommendation 90-7 (FR 1990). All work activities are described in the revised program plan (DOE 1994b), and this report follows the same format presented there. A summary of the key events occurring this quarter is presented in Section 1.2. More detailed discussions of progress are located in Sections 2.0 through 4.0

Drug‑induced Stevens–Johnson Syndrome in Indian Population: A ...

African Journals Online (AJOL)

2017-09-14

Sep 14, 2017 ... Drug-induced Stevens–Johnson syndrome in Indian population: A multicentric retrospective analysis. Niger J Clin Pract 2017;20:978-83. This is an open access article distributed under the terms of the Creative Commons. Attribution-Non Commercial-Share Alike 3.0 License, which allows others to remix,.

Development of Safety Significance Evaluation Program for Accidents and Events in NPPs

International Nuclear Information System (INIS)

Yang, Hui Chang; Hong, Seok Jin; Cho, Nam Chul; Chung, Dae Wook; Lee, Chang Joo

2010-01-01

To evaluate the significance in terms of safety for the accidents and events occurred in nuclear power plants using probabilistic safety assessment techniques can provide useful insights to the regulator. Based on the quantified risk information of accident or event occurred, regulators can decide which regulatory areas should be focused than the others. To support these regulatory analysis activities, KINS-ASP program was developed. KINS-ASP program can supports the risk increase due to the occurred accidents or events by providing the graphic interfaces and linked quantification engines for the PSA experts and non- PSA acquainted regulators both

Bridging the Divide between Safety and Risk Management for your Project or Program

Science.gov (United States)

Lutomski, Mike

2005-01-01

This presentation will bridge the divide between these separate but overlapping disciplines and help explain how to use Risk Management as an effective management decision support tool that includes safety. Risk Management is an over arching communication tool used by management to prioritize and effectively mitigate potential problems before they concur. Risk Management encompasses every kind of potential problem that can occur on a program or project. Some of these are safety issues such as hazards that have a specific likelihood and consequence that need to be controlled and included to show an integrated picture of accepted) mitigated, and residual risk. Integrating safety and other assurance disciplines is paramount to accurately representing a program s or projects risk posture. Risk is made up of several components such as technical) cost, schedule, or supportability. Safety should also be a consideration for every risk. The safety component can also have an impact on the technical, cost, and schedule aspect of a given risk. The current formats used for communication of safety and risk issues are not consistent or integrated. The presentation will explore the history of these disciplines, current work to integrate them, and suggestions for integration for the future.

Antarctic Martian Meteorites at Johnson Space Center

Science.gov (United States)

Funk, R. C.; Satterwhite, C. E.; Righter, K.; Harrington, R.

2018-01-01

This past year marked the 40th anniversary of the first Martian meteorite found in Antarctica by the ANSMET Antarctic Search for Meteorites) program, ALH 77005. Since then, an additional 14 Martian meteorites have been found by the ANSMET program making for a total of 15 Martian meteorites in the U. S. Antarctic meteorite collection at Johnson Space Center (JSC). Of the 15 meteorites, some have been paired so the 15 meteorites actually represent a total of approximately 9 separate samples. The first Martian meteorite found by ANSMET was ALH 77005 (482.500 g), a lherzolitic shergottite. When collected, this meteorite was split as a part of the joint expedition with the National Institute of Polar Research (NIPR) Japan. Originally classified as an "achondrite-unique", it was re-classified as a Martian lherzolitic shergottite in 1982. This meteorite has been allocated to 137 scientists for research and there are 180.934 g remaining at JSC. Two years later, one of the most significant Martian meteorites of the collection at JSC was found at Elephant Moraine, EET 79001 (7942.000 g), a shergottite. This meteorite is the largest in the Martian collection at JSC and was the largest stony meteorite sample collected during the 1979 season. In addition to its size, this meteorite is of particular interest because it contains a linear contact separating two different igneous lithologies, basaltic and olivine-phyric. EET 79001 has glass inclusions that contain noble gas and nitrogen compositions that are proportionally identical to the Martian atmosphere, as measured by the Viking spacecraft. This discovery helped scientists to identify where the "SNC" meteorite suite had originated, and that we actually possessed Martian samples. This meteorite has been allocated to 205 scientists for research and 5,298.435 g of sample is available.

Seismic safety margin research program. Program plan, Revision II

International Nuclear Information System (INIS)

Smith, P.D.; Tokarz, F.J.; Bernreuter, D.L.; Cummings, G.E.; Chou, C.K.; Vagliente, V.N.; Johnson, J.J.; Dong, R.G.

1978-01-01

The document has been prepared pursuant to the second meeting of the Senior Research Review Group of the Seismic Safety Margin Research Program (SSMRP), which was held on June 15, 16, 1978. The major portion of the material contained in the document is descriptions of specific subtasks to be performed on the SSMRP. This is preceded by a brief discussion of the objective of the SSMRP and the approach to be used. Specific subtasks to be performed in Phase I of the SSMRP are as follows: (1) plant/site selection, (2) seismic input, (3) soil structure interaction, (4) structural building response, (5) structural sub-system response, (6) fragility, (7) system analysis, and (8) Phase II task definition

A randomized, controlled intervention of machine guarding and related safety programs in small metal-fabrication businesses.

Science.gov (United States)

Parker, David L; Brosseau, Lisa M; Samant, Yogindra; Xi, Min; Pan, Wei; Haugan, David

2009-01-01

Metal fabrication employs an estimated 3.1 million workers in the United States. The absence of machine guarding and related programs such as lockout/tagout may result in serious injury or death. The purpose of this study was to improve machine-related safety in small metal-fabrication businesses. We used a randomized trial with two groups: management only and management-employee. We evaluated businesses for the adequacy of machine guarding (machine scorecard) and related safety programs (safety audit). We provided all businesses with a report outlining deficiencies and prioritizing their remediation. In addition, the management-employee group received four one-hour interactive training sessions from a peer educator. We evaluated 40 metal-fabrication businesses at baseline and 37 (93%) one year later. Of the three nonparticipants, two had gone out of business. More than 40% of devices required for adequate guarding were missing or inadequate, and 35% of required safety programs and practices were absent at baseline. Both measures improved significantly during the course of the intervention. No significant differences in changes occurred between the two intervention groups. Machine-guarding practices and programs improved by up to 13% and safety audit scores by up to 23%. Businesses that added safety committees or those that started with the lowest baseline measures showed the greatest improvements. Simple and easy-to-use assessment tools allowed businesses to significantly improve their safety practices, and safety committees facilitated this process.

FAA National Aviation Safety Inspection Program. Annual Report FY90

Science.gov (United States)

1991-06-01

This report was undertaken to document, analyze, and place : into national perspective the findings from the 1990 National : Aviation Safety Inspection Program (NASIP). This report is the : fifth in a series of annual reports covering the results of ...

Using Johnson Distribution for Automatic Threshold Setting in Wind Turbine Condition Monitoring System

DEFF Research Database (Denmark)

Marhadi, Kun Saptohartyadi; Skrimpas, Georgios Alexandros

2014-01-01

not rep- resent the whole operating conditions of a turbine, which re- sults in uncertainty in the parameters of the fitted probabil- ity distribution and the thresholds calculated. In this study Johnson distribution is used to identify shape, location, and scale parameters of distribution that can best...... fit vibration data. This study shows that using Johnson distribution can elim- inate testing or fitting various distributions to the data, and have more direct approach to obtain optimal thresholds. To quantify uncertainty in the thresholds due to limited data, im- plementations with bootstrap method...

Risk Management: Earning Recognition with an Automated Safety Program

Science.gov (United States)

Lansberry, Linden; Strasburger, Tom

2012-01-01

Risk management is a huge task that requires diligent oversight to avoid penalties, fines, or lawsuits. Add in the burden of limited resources that schools face today, and the challenge of meeting the required training, reporting, compliance, and other administrative issues associated with a safety program is almost insurmountable. Despite an…

Stevens-Johnson Syndrome After Armodafinil Use.

Science.gov (United States)

Holfinger, Steven; Roy, Asim; Schmidt, Markus

2018-05-15

We present the case of a 21-year-old woman in whom Stevens-Johnson syndrome (SJS) developed after initiation of armodafinil. Although this rare and life-threatening reaction is listed on armodafinil's label, no cases have been reported in the literature. This case, in addition to an update of the drug's label after post-marketing research, both support the link between armodafinil and SJS. Providers should maintain a high clinical suspicion for SJS when starting therapy to minimize associated morbidity and mortality by discontinuing armodafinil at the onset of first symptoms. © 2018 American Academy of Sleep Medicine.

Health and safety plan for operations performed for the Environmental Restoration Program

Energy Technology Data Exchange (ETDEWEB)

Trippet, W.A. II (IT Corp., (United States)); Reneau, M.; Morton, S.L. (EG and G Idaho, Inc., Idaho Falls, ID (United States))

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP.

Health and safety plan for operations performed for the Environmental Restoration Program

International Nuclear Information System (INIS)

Trippet, W.A. II; Reneau, M.; Morton, S.L.

1992-04-01

This document constitutes the generic health and safety plan for the Environmental Restoration Program (ERP). It addresses the health and safety requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA); Occupational Safety and Health Administration (OSHA) 29 CFR 1910.120 standard; and EG ampersand G Idaho, Inc. This plan is a guide to individuals who must complete a health and safety plan for a task performed for the EPR. It contains a task specific addendum that, when completed, specifically addresses task specific health and safety issues. This health and safety plan reduces the time it takes to write a task specific health and safety plan by providing discussions of requirements, guidance on where specific information is located, and specific topics in the Addendum that must be discussed at a task level. This format encourages a complete task specific health and safety plan and a standard for all health and safety plans written for ERP

Key Performance Indicators in the Evaluation of the Quality of Radiation Safety Programs.

Science.gov (United States)

Schultz, Cheryl Culver; Shaffer, Sheila; Fink-Bennett, Darlene; Winokur, Kay

2016-08-01

Beaumont is a multiple hospital health care system with a centralized radiation safety department. The health system operates under a broad scope Nuclear Regulatory Commission license but also maintains several other limited use NRC licenses in off-site facilities and clinics. The hospital-based program is expansive including diagnostic radiology and nuclear medicine (molecular imaging), interventional radiology, a comprehensive cardiovascular program, multiple forms of radiation therapy (low dose rate brachytherapy, high dose rate brachytherapy, external beam radiotherapy, and gamma knife), and the Research Institute (including basic bench top, human and animal). Each year, in the annual report, data is analyzed and then tracked and trended. While any summary report will, by nature, include items such as the number of pieces of equipment, inspections performed, staff monitored and educated and other similar parameters, not all include an objective review of the quality and effectiveness of the program. Through objective numerical data Beaumont adopted seven key performance indicators. The assertion made is that key performance indicators can be used to establish benchmarks for evaluation and comparison of the effectiveness and quality of radiation safety programs. Based on over a decade of data collection, and adoption of key performance indicators, this paper demonstrates one way to establish objective benchmarking for radiation safety programs in the health care environment.

An Overview of Head Start Program Studies

Science.gov (United States)

Hines, Jeanne Morris

2017-01-01

Johnson's "War on Poverty" administrative team campaigned for committee members to join the War on Poverty efforts to create and develop programs for children born into poverty (Zigler, 2003). Poverty based programs, such as the Head Start program, continue to put into place proactive measures to increase preschooler's cognitive…

Nuclear Data Activities in Support of the DOE Nuclear Criticality Safety Program

International Nuclear Information System (INIS)

Westfall, R.M.; McKnight, R.D.

2005-01-01

The DOE Nuclear Criticality Safety Program (NCSP) provides the technical infrastructure maintenance for those technologies applied in the evaluation and performance of safe fissionable-material operations in the DOE complex. These technologies include an Analytical Methods element for neutron transport as well as the development of sensitivity/uncertainty methods, the performance of Critical Experiments, evaluation and qualification of experiments as Benchmarks, and a comprehensive Nuclear Data program coordinated by the NCSP Nuclear Data Advisory Group (NDAG).The NDAG gathers and evaluates differential and integral nuclear data, identifies deficiencies, and recommends priorities on meeting DOE criticality safety needs to the NCSP Criticality Safety Support Group (CSSG). Then the NDAG identifies the required resources and unique capabilities for meeting these needs, not only for performing measurements but also for data evaluation with nuclear model codes as well as for data processing for criticality safety applications. The NDAG coordinates effort with the leadership of the National Nuclear Data Center, the Cross Section Evaluation Working Group (CSEWG), and the Working Party on International Evaluation Cooperation (WPEC) of the OECD/NEA Nuclear Science Committee. The overall objective is to expedite the issuance of new data and methods to the DOE criticality safety user. This paper describes these activities in detail, with examples based upon special studies being performed in support of criticality safety for a variety of DOE operations

Radiation safety program in high dose rate brachytherapy facility at INHS Asvini

Directory of Open Access Journals (Sweden)

Kirti Tyagi

2014-01-01

Full Text Available Brachytherapy concerns primarily the use of radioactive sealed sources which are inserted into catheters or applicators and placed directly into tissue either inside or very close to the target volume. The use of radiation in treatment of patients involves both benefits and risks. It has been reported that early radiation workers had developed radiation induced cancers. These incidents lead to continuous work for the improvement of radiation safety of patients and personnel The use of remote afterloading equipment has been developed to improve radiation safety in the delivery of treatment in brachytherapy. The widespread adoption of high dose rate brachytherapy needs appropriate quality assurance measures to minimize the risks to both patients and medical staff. The radiation safety program covers five major aspects: quality control, quality assurance, radiation monitoring, preventive maintenance, administrative measures and quality audit. This paper will discuss the radiation safety program developedfor a high dose rate brachytherapy facility at our centre which may serve as a guideline for other centres intending to install a similar facility.

Guidance for implementing an environmental, safety and health assurance program. Volume 2. A model plan for environmental, safety and health staff audits and appraisals

International Nuclear Information System (INIS)

Ellingson, A.C.

1980-09-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. This document is concerned with ES and H audit and appraisal activities of an ES and H Staff Organization as they might be performed in an institution whose ES and H program is based upon the ES and H Assurance Program Standard. An annotated model plan for ES and H Staff audits and appraisals is presented and discussed

Comparing Occupational Health and Safety Management System Programming with Injury Rates in Poultry Production.

Science.gov (United States)

Autenrieth, Daniel A; Brazile, William J; Douphrate, David I; Román-Muñiz, Ivette N; Reynolds, Stephen J

2016-01-01

Effective methods to reduce work-related injuries and illnesses in animal production agriculture are sorely needed. One approach that may be helpful for agriculture producers is the adoption of occupational health and safety management systems. In this replication study, the authors compared the injury rates on 32 poultry growing operations with the level of occupational health and safety management system programming at each farm. Overall correlations between injury rates and programming level were determined, as were correlations between individual management system subcomponents to ascertain which parts might be the most useful for poultry producers. It was found that, in general, higher levels of occupational health and safety management system programming were associated with lower rates of workplace injuries and illnesses, and that Management Leadership was the system subcomponent with the strongest correlation. The strength and significance of the observed associations were greater on poultry farms with more complete management system assessments. These findings are similar to those from a previous study of the dairy production industry, suggesting that occupational health and safety management systems may hold promise as a comprehensive way for producers to improve occupational health and safety performance. Further research is needed to determine the effectiveness of such systems to reduce farm work injuries and illnesses. These results are timely given the increasing focus on occupational safety and health management systems.

Critical experiments facility and criticality safety programs at JAERI

International Nuclear Information System (INIS)

Kobayashi, Iwao; Tachimori, Shoichi; Takeshita, Isao; Suzaki, Takenori; Miyoshi, Yoshinori; Nomura, Yasushi

1985-10-01

The nuclear criticality safety is becoming a key point in Japan in the safety considerations for nuclear installations outside reactors such as spent fuel reprocessing facilities, plutonium fuel fabrication facilities, large scale hot alboratories, and so on. Especially a large scale spent fuel reprocessing facility is being designed and would be constructed in near future, therefore extensive experimental studies are needed for compilation of our own technical standards and also for verification of safety in a potential criticality accident to obtain public acceptance. Japan Atomic Energy Research Institute is proceeding a construction program of a new criticality safety experimental facility where criticality data can be obtained for such solution fuels as mainly handled in a reprocessing facility and also chemical process experiments can be performed to investigate abnormal phenomena, e.g. plutonium behavior in solvent extraction process by using pulsed colums. In FY 1985 detail design of the facility will be completed and licensing review by the government would start in FY 1986. Experiments would start in FY 1990. Research subjects and main specifications of the facility are described. (author)

Sun Safety at Work Canada: a multiple case-study protocol to develop sun safety and heat protection programs and policies for outdoor workers.

Science.gov (United States)

Kramer, Desre M; Tenkate, Thomas; Strahlendorf, Peter; Kushner, Rivka; Gardner, Audrey; Holness, D Linn

2015-07-10

CAREX Canada has identified solar ultraviolet radiation (UV) as the second most prominent carcinogenic exposure in Canada, and over 75 % of Canadian outdoor workers fall within the highest exposure category. Heat stress also presents an important public health issue, particularly for outdoor workers. The most serious form of heat stress is heat stroke, which can cause irreversible damage to the heart, lungs, kidneys, and liver. Although the need for sun and heat protection has been identified, there is no Canada-wide heat and sun safety program for outdoor workers. Further, no prevention programs have addressed both skin cancer prevention and heat stress in an integrated approach. The aim of this partnered study is to evaluate whether a multi-implementation, multi-evaluation approach can help develop sustainable workplace-specific programs, policies, and procedures to increase the use of UV safety and heat protection. This 2-year study is a theory-driven, multi-site, non-randomized study design with a cross-case analysis of 13 workplaces across four provinces in Canada. The first phase of the study includes the development of workplace-specific programs with the support of the intensive engagement of knowledge brokers. There will be a three-points-in-time evaluation with process and impact components involving the occupational health and safety (OHS) director, management, and workers with the goal of measuring changes in workplace policies, procedures, and practices. It will use mixed methods involving semi-structured key informant interviews, focus groups, surveys, site observations, and UV dosimetry assessment. Using the findings from phase I, in phase 2, a web-based, interactive, intervention planning tool for workplaces will be developed, as will the intensive engagement of intermediaries such as industry decision-makers to link to policymakers about the importance of heat and sun safety for outdoor workers. Solar UV and heat are both health and safety hazards

Fostering Helping Relationships: An Interview with W. Brad Johnson

Science.gov (United States)

Johnson, W. Brad; Robison, Susan

2017-01-01

There are many kinds of helping relationships--coaching, mentoring, psychotherapy, and others. In this interview with W. Brad Johnson, Susan Robison explores how some of his insights about mentoring can be applicable to other types of helping relationships, like coaching. Mentoring is viewed as a broader relationship, but does include many of the…

Yang--Mills gauge theories and Baker--Johnson quantum electrodynamics

International Nuclear Information System (INIS)

Lemmon, J.; Mahanthappa, K.T.

1976-01-01

We show that the physical mass of a fermion in a symmetric asymptotically free non-Abelian vector gauge theory is dynamical in origin. We comment on the close analogy that exists between such a theory and the Baker--Johnson finite quantum electrodynamics. Comments are also made when there is spontaneous symmetry breaking

Reliability and safety program plan outline for the operational phase of a waste isolation facility

International Nuclear Information System (INIS)

Ammer, H.G.; Wood, D.E.

1977-01-01

A Reliability and Safety Program plan outline has been prepared for the operational phase of a Waste Isolation Facility. The program includes major functions of risk assessment, technical support activities, quality assurance, operational safety, configuration monitoring, reliability analysis and support and coordination meetings. Detailed activity or task descriptions are included for each function. Activities are time-phased and presented in the PERT format for scheduling and interactions. Task descriptions include manloading, travel, and computer time estimates to provide data for future costing. The program outlined here will be used to provide guidance from a reliability and safety standpoint to design, procurement, construction, and operation of repositories for nuclear waste. These repositories are to be constructed under the National Waste Terminal Storage program under the direction of the Office of Waste Isolation, Union Carbide Corp. Nuclear Division

The Pennsylvania certified safety committee program: an evaluation of participation and effects on work injury rates.

Science.gov (United States)

Liu, Hangsheng; Burns, Rachel M; Schaefer, Agnes G; Ruder, Teague; Nelson, Christopher; Haviland, Amelia M; Gray, Wayne B; Mendeloff, John

2010-08-01

Since 1994, Pennsylvania, like several other states, has provided a 5% discount on workers' compensation insurance premiums for firms with a certified joint labor management safety committee. This study explored the factors affecting program participation and evaluated the effect of this program on work injuries. Using Pennsylvania unemployment insurance data (1996-2006), workers' compensation data (1998-2005), and the safety committee audit data (1999-2007), we conducted propensity score matching and regression analysis on the program's impact on injury rates. Larger firms, firms with higher injury rates, firms in high risk industries, and firms without labor unions were more likely to join the safety committee program and less likely to drop out of the program. The injury rates of participants did not decline more than the rates for non-participants; however, rates at participant firms with good compliance dropped more than the rates at participant firms with poor compliance. Firm size and prior injury rates are key predictors of program participation. Firms that complied with the requirement to train their safety committee members did experience reductions in injuries, but non-compliance with that and other requirements was so widespread that no overall impact of the program could be detected. Copyright 2010 Wiley-Liss, Inc.

Airports and Airfields, Airports within Johnson County as well as runway depicted with attribute information of both airport and runway., Published in Not Provided, Johnson County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Airports and Airfields dataset current as of unknown. Airports within Johnson County as well as runway depicted with attribute information of both airport and runway..

ORNL Nuclear Safety Research and Development Program Bimonthly Report for July-August 1968

Energy Technology Data Exchange (ETDEWEB)

Cottrell, W.B.

2001-08-17

The accomplishments during the months of July and August in the research and development program under way at ORNL as part of the U.S. Atomic Energy Commission's Nuclear Safety Program are summarized, Included in this report are work on various chemical reactions, as well as the release, characterization, and transport of fission products in containment systems under various accident conditions and on problems associated with the removal of these fission products from gas streams. Although most of this work is in general support of water-cooled power reactor technology, including LOFT and CSE programs, the work reflects the current safety problems, such as measurements of the prompt fuel element failure phenomena and the efficacy of containment spray and pool-suppression systems for fission-product removal. Several projects are also conducted in support of the high-temperature gas-cooled reactor (HTGR). Other major projects include fuel-transport safety investigations, a series of discussion papers on various aspects of water-reactor technology, antiseismic design of nuclear facilities, and studies of primary piping and steel, pressure-vessel technology. Experimental work relative to pressure-vessel technology includes investigations of the attachment of nozzles to shells and the implementation of joint AEX-PVFX programs on heavy-section steel technology and nuclear piping, pumps, and valves. Several of the projects are directly related to another major undertaking; namely, the AEC's standards program, which entails development of engineering safeguards and the establishment of codes and standards for government-owned or -sponsored reactor facilities. Another task, CHORD-S, is concerned with the establishment of computer programs for the evaluation of reactor design data, The recent activities of the NSIC and the Nuclear Safety journal in behalf of the nuclear community are also discussed.

Deviasi Taksiran Berat Janin pada Metode Johnson-Toshack, Formula Sederhana dan Formula Dare

Directory of Open Access Journals (Sweden)

Emy Rianti

2017-08-01

Full Text Available The ability of the birth attendant to estimate the birth weight of the fetus is very important that it does not cause childbirth dystocia that may cause rip in the birth canal. The aim of this study was to compare the deviation of fetal weight estimation according to Johnson-Toshack method, simple formula and Dare formula. Thedesign used was cross sectional, the data taken primarily, involving 100 respondents at Fatmawati General Hospital Jakarta, from August to September 2015. The findings showed that the smallest deviation mean of fetal weight estimation is Johnson-Toshack method. The results of this method of measurement tend to be close to infant birth weight, especially in the client childbirth with abdominal circumference 90 - 100 cm. The conclusion of this study is that Johnson-Toshack's fetal weighing estimates are more appropriate for childbirth with 90 to 100 cm abdominal circumference size, except in childbirth with ruptured membranes, applying a fetal weight estimate based on the Dare formula would be more appropriate.

Safety approach and R and D program for future french sodium-cooled fast reactors

International Nuclear Information System (INIS)

Beils, Stephane; Carluec, Bernard; Devictor, Nicolas; Fiorini, Gian Luigi; Sauvage, Jean Francois

2011-01-01

This paper presents briefly the safety approach as well as the R and D program that is underway to support the deployment of future French Sodium-Cooled fast Reactors (SFRs): A) Safety objectives and principles for future reactors. The content of the first section reflects the works of AREVA, CEA, and EDF concerning the safety orientations for the future reactors. The availability of such orientations and requirements for the SFRs has to allow introducing and managing the process that will lead to the detailed definition of the safety approach, to the selection of the corresponding safety options, and to the identification and motivation of the supporting R and D. B) Strategy and roadmap in support of the R and D for future SFRs. This section describes the R and D program led jointly by CEA, EDF, and AREVA, which has been developed with the objectives to be able to preliminarily define, by 2012, the safety orientations for the future SFRs, and to deduce from them the characteristics of the ASTRID prototype. (author)

United States program for the safety assessment of geologic disposal of commercial radioactive wastes

International Nuclear Information System (INIS)

Claiborne, H.C.

1977-01-01

The safe disposal of commercial radioactive wastes in deep geologic formations is the goal of the National Waste Terminal Storage (NWTS) Program. A comprehensive safety assessment program has been established which will proceed on a schedule consistent with the start-up of two waste repositories in late 1985. Safety assessment begins with selection of a disposal site; that is, all geologic and hydrologic factors must indicate long-term stability of the formation and prospective isolation of wastes from circulating around waters for hundreds of thousands of years. The long-term stability of each site must be demonstrated by sophisticated rock mechanics analyses. To help provide answers on the mechanism and consequences of an unlikely breach in the integrity of the repository, a Waste Isolation Safety Assessment Program (WISAP) is being sponsored at the Battelle Pacific Northwest Laboratories. Methods and data necessary to characterize the safety of generic geological waste disposal concepts, which are to be applied in the assessment of specific sties, will be developed. Other long-term safety-related studies that complement WISAP are in progress, for example, borehole plugging, salt dissolutioning, and salt transport in vertical boreholes. Requirements for licensing are in the process of being formulated by the NRC

FMCSA safety program effectiveness measurement : roadside intervention effectiveness model FY 2013 : analysis brief.

Science.gov (United States)

2017-08-01

The Roadside Inspection and Traffic Enforcement programs are two of FMCSAs most powerful safety tools. By continually examining the results of these programs, FMCSA can ensure that they are being executed effectively and are producing the desired ...

Radiologic safety program for ionizing radiation facilities in Parana, Brazil

International Nuclear Information System (INIS)

Schmidt, M.F.S.; Tilly Junior, J.G.

1997-01-01

A radiologic safety program for inspection, licensing and control of the use of ionizing radiation in medical, industrial and research facilities in Parana, Brazil is presented. The program includes stages such as: 1- division into implementation phases considering the activity development for each area; 2-use of the existing structure to implement and to improve services. The development of the program will permit to evaluate the improvement reached and to correct operational strategic. As a result, a quality enhancement at the services performed, a reduction for radiation dose exposure and a faster response for emergency situations will be expected

UNCERTAINTY AND THE JOHNSON-ETTINGER MODEL FOR VAPOR INTRUSION CALCULATIONS

Science.gov (United States)

The Johnson-Ettinger Model is widely used for assessing the impacts of contaminated vapors on residential air quality. Typical use of this model relies on a suite of estimated data, with few site-specific measurements. Software was developed to provide the public with automate...

The Johnson Space Center management information systems: User's guide to JSCMIS

Science.gov (United States)

Bishop, Peter C.; Erickson, Lloyd

1990-01-01

The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at the NASA Johnson Space Center which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. The User's Guide to JSCMIS is the supplement to the JSCMIS Research Report which details the objectives, the architecture, and implementation of the interface. It is a tutorial on how to use the interface and a reference for details about it. The guide is structured like an extended JSCMIS session, describing all of the interface features and how to use them. It also contains an appendix with each of the standard FORMATs currently included in the interface. Users may review them to decide which FORMAT most suits their needs.

Insights from the U.S. department of Energy plant safety evaluation program of VVER and RBMK reactors

International Nuclear Information System (INIS)

Petri, M.C.; Binder, J.L.; Pasedag, W.F.

2001-01-01

Throughout the years 1990 the U.S. Department of Energy has worked build capability in countries of the former Soviet Union to assess the safety of their VVER and RBMK reactors. Through this Plant Safety Evaluation Program, deterministic and probabilistic analyses have been used to provide a documented plant risk profile to support safe plant operation and to set priorities for safety upgrades. Work has been sponsored at thirteen nuclear power plant sites in eight countries. The Plant Safety Evaluation Program has resulted in immediate and long-term safety benefits for the Soviet-designed nuclear plants. (author)

Assessment of Native Languages for Food Safety Training Programs for Meat Industry Employees

Science.gov (United States)

Olsen, Sherrlyn S.; Cordray, Joseph C.; Sapp, Stephen; Sebranek, Joseph G.; Anderson, Barbara; Wenger, Matt

2012-01-01

Challenges arise when teaching food safety to culturally diverse employees working in meatpacking and food manufacturing industries. A food safety training program was developed in English, translated into Spanish, and administered to 1,265 adult learners. Assessments were conducted by comparing scores before and immediately following training.…

Early-stage evolution of particle size distribution with Johnson's SB function due to Brownian coagulation

International Nuclear Information System (INIS)

Tang Hong; Lin Jianzhong

2013-01-01

The moment method can be used to determine the time evolution of particle size distribution due to Brownian coagulation based on the general dynamic equation (GDE). But the function form of the initial particle size distribution must be determined beforehand for the moment method. If the assumed function type of the initial particle size distribution has an obvious deviation from the true particle population, the evolution of particle size distribution may be different from the real evolution tendency. Thus, a simple and general method is proposed based on the moment method. In this method, the Johnson's S B function is chosen as a general distribution function to fit the initial distributions including the log normal (L-N), Rosin–Rammler (R-R), normal (N-N) and gamma distribution functions, respectively. Meanwhile, using the modified beta function to fit the L-N, R-R, N-N and gamma functions is also conducted as a comparison in order to present the advantage of the Johnson's S B function as the general distribution function. And then, the time evolution of particle size distributions using the Johnson's S B function as the initial distribution can be obtained by several lower order moment equations of the Johnson's S B function in conjunction with the GDE during the Brownian coagulation process. Simulation experiments indicate that fairly reasonable results of the time evolution of particle size distribution can be obtained with this proposed method in the free molecule regime, transition regime and continuum plus near continuum regime, respectively, at the early time stage of evolution. The Johnson's S B function has the ability of describing the early time evolution of different initial particle size distributions. (paper)

Implementing the Comprehensive Unit-Based Safety Program (CUSP) to Improve Patient Safety in an Academic Primary Care Practice.

Science.gov (United States)

Pitts, Samantha I; Maruthur, Nisa M; Luu, Ngoc-Phuong; Curreri, Kimberly; Grimes, Renee; Nigrin, Candace; Sateia, Heather F; Sawyer, Melinda D; Pronovost, Peter J; Clark, Jeanne M; Peairs, Kimberly S

2017-11-01

While there is growing awareness of the risk of harm in ambulatory health care, most patient safety efforts have focused on the inpatient setting. The Comprehensive Unit-based Safety Program (CUSP) has been an integral part of highly successful safety efforts in inpatient settings. In 2014 CUSP was implemented in an academic primary care practice. As part of CUSP implementation, staff and clinicians underwent training on the science of safety and completed a two-question safety assessment survey to identify safety concerns in the practice. The concerns identified by team members were used to select two initial safety priorities. The impact of CUSP on safety climate and teamwork was assessed through a pre-post comparison of results on the validated Safety Attitudes Questionnaire. Ninety-six percent of staff completed science of safety training as part of CUSP implementation, and 100% of staff completed the two-question safety assessment. The most frequently identified safety concerns were related to medications (n = 11, 28.2), diagnostic testing (n = 9, 25), and communication (n = 5, 14). The CUSP team initially prioritized communication and infection control, which led to standardization of work flows within the practice. Six months following CUSP implementation, large but nonstatistically significant increases were found for the percentage of survey respondents who reported knowledge of the proper channels for questions about patient safety, felt encouraged to report safety concerns, and believed that the work setting made it easy to learn from the errors of others. CUSP is a promising tool to improve safety climate and to identify and address safety concerns within ambulatory health care. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Nuclear Safety R and D Programs and trend in the U. S. Utility Industry

International Nuclear Information System (INIS)

Kim, Jong Hyun

1992-01-01

First of all, the deterministic approach to safety analysis, which had dominated safety research in the earlier years, has given much ground to probabilistic approach. Secondly, human factors analysis has become an important part of safety research. Third, safety research relevant to reliability, or safety combined with reliability, are gradually taking place of purely safety-oriented or stand-alone safety research. More and more nuclear utilities in the U. S. are integrating safety with reliability. This evolution is in part due to the successful completion of major safety testing and analyses of deterministic nature, and partially due to the utility industry's desire to harvest synergistic nature, and partially due to the utility industry's desire to harvest synergistic results by combining safety with reliability, as the utility industry is more and more concerned about reducing operation and maintenance costs by enhancing reliability while maintaining plant safety. Nuclear safety is a complex and comprehensive concept, defying a simple categorization or interpretation. Thus, research and development in nuclear safety is necessarily diverse, and the program areas and trend presented in this paper are not meant to be all inclusive. For instance, there are some other active areas that were not mentioned, such as seismic risk assessment program and others. Nuclear safety research and development activities have undergone a perceptible shift of emphasis in recent years. They have become more focused and product-oriented. Also, except for the severe accident analysis, the emphasis on prevention and mitigation of accident, rather than analyzing the consequences of accident, is very much in evidence; that is, reliability-based technologies using PIRA methodology, and upgrading of instrumentation and control technologies are in the main stream of activities

Design and evaluation of simulation scenarios for a program introducing patient safety, teamwork, safety leadership, and simulation to healthcare leaders and managers.

Science.gov (United States)

Cooper, Jeffrey B; Singer, Sara J; Hayes, Jennifer; Sales, Michael; Vogt, Jay W; Raemer, Daniel; Meyer, Gregg S

2011-08-01

We developed a training program to introduce managers and informal leaders of healthcare organizations to key concepts of teamwork, safety leadership, and simulation to motivate them to act as leaders to improve safety within their sphere of influence. This report describes the simulation scenario and debriefing that are core elements of that program. Twelve teams of clinician and nonclinician managers were selected from a larger set of volunteers to participate in a 1-day, multielement training program. Two simulation exercises were developed: one for teams of nonclinicians and the other for clinicians or mixed groups. The scenarios represented two different clinical situations, each designed to engage participants in discussions of their safety leadership and teamwork issues immediately after the experience. In the scenarios for nonclinicians, participants conducted an anesthetic induction and then managed an ethical situation. The scenario for clinicians simulated a consulting visit to an emergency room that evolved into a problem-solving challenge. Participants in this scenario had a limited time to prepare advice for hospital leadership on how to improve observed safety and cultural deficiencies. Debriefings after both types of scenarios were conducted using principles of "debriefing with good judgment." We assessed the relevance and impact of the program by analyzing participant reactions to the simulation through transcript data and facilitator observations as well as a postcourse questionnaire. The teams generally reported positive perceptions of the relevance and quality of the simulation with varying types and degrees of impact on their leadership and teamwork behaviors. These kinds of clinical simulation exercises can be used to teach healthcare leaders and managers safety leadership and teamwork skills and behaviors.

Guidance for implementing an environmental, safety, and health assurance program. Volume 10. Model guidlines for line organization environmental, safety and health audits and appraisals

International Nuclear Information System (INIS)

Ellingson, A.C.

1981-10-01

This is 1 of 15 documents designed to illustrate how an Environmental, Safety and Health (ES and H) Assurance Program may be implemented. The generic definition of ES and H Assurance Programs is given in a companion document entitled An Environmental, Safety and Health Assurance Program Standard. The Standard specifies that the operational level of an institution must have an internal assurance function, and this document provides guidance for the audit/appraisal portion of the operational level's ES and H program. The appendixes include an ES and H audit checklist, a sample element rating guide, and a sample audit plan for working level line organization internal audits

Tenaga Nasional Berhad dam safety and surveillance program

International Nuclear Information System (INIS)

Jansen Luis; Zulkhairi Abd Talib

2006-01-01

This paper discusses the current practice of dam surveillance, which includes dam monitoring which is a process of visual inspections, measuring, processing, compiling and analyzing dam instrumentation data to determine the performance of a dam. The prime objective of the dam surveillance system is to ensure that any occurrence and development of safety deficiencies and problems are quickly detected, identified, analyzed and the required remedial actions are determined and consequently carried out in due time. In brief, the section is responsible to ensure that the dam monitoring and surveillance works are implemented as per scheduled and in accordance with the requirement and guidelines prepared by the dam designers and in accordance with international commission on large dams, ICOLD. The paper also illustrates and recommends an alternative approach for dam surveillance program using risk management approach, which is currently being actively adopted by some countries like USA, Canada, Australia and etc, towards improving the dam safety management and the decision making process. The approach provides a wider area of opportunity, improvements and benefits particular in the evaluation and modifications to the dam performance and safety. The process provides an effective and efficient tool for the decision makers and engineers through a comprehensive evaluation and a good understanding of the hazards, risks and consequences in relation to dam safety investigations. (Author)

Training Programs on Radiological Safety for users of Ionizing Radiations in Peru

International Nuclear Information System (INIS)

Medina Gironzini, E.

2003-01-01

In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country , grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well a s the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc...) and are part of the continuous education program of CSEN. (Author)

Evolution of International Space Station Program Safety Review Processes and Tools

Science.gov (United States)

Ratterman, Christian D.; Green, Collin; Guibert, Matt R.; McCracken, Kristle I.; Sang, Anthony C.; Sharpe, Matthew D.; Tollinger, Irene V.

2013-01-01

The International Space Station Program at NASA is constantly seeking to improve the processes and systems that support safe space operations. To that end, the ISS Program decided to upgrade their Safety and Hazard data systems with 3 goals: make safety and hazard data more accessible; better support the interconnection of different types of safety data; and increase the efficiency (and compliance) of safety-related processes. These goals are accomplished by moving data into a web-based structured data system that includes strong process support and supports integration with other information systems. Along with the data systems, ISS is evolving its submission requirements and safety process requirements to support the improved model. In contrast to existing operations (where paper processes and electronic file repositories are used for safety data management) the web-based solution provides the program with dramatically faster access to records, the ability to search for and reference specific data within records, reduced workload for hazard updates and approval, and process support including digital signatures and controlled record workflow. In addition, integration with other key data systems provides assistance with assessments of flight readiness, more efficient review and approval of operational controls and better tracking of international safety certifications. This approach will also provide new opportunities to streamline the sharing of data with ISS international partners while maintaining compliance with applicable laws and respecting restrictions on proprietary data. One goal of this paper is to outline the approach taken by the ISS Progrm to determine requirements for the new system and to devise a practical and efficient implementation strategy. From conception through implementation, ISS and NASA partners utilized a user-centered software development approach focused on user research and iterative design methods. The user-centered approach used on

A Theoretical Analysis of the Performance of Learning Disabled Students on the Woodcock-Johnson Psycho-Educational Battery.

Science.gov (United States)

Shinn, Mark; And Others

Two studies were conducted to (1) analyze the subtest characteristics of the Woodcock-Johnson Psycho-Educational Battery, and (2) apply those results to an analysis of 50 fourth grade learning disabled (LD) students' performance on the Battery. Analyses indicated that the poorer performance of LD students on the Woodcock-Johnson Tests of Cognitive…

Review of literature on the TMI accident and correlation to the LWR Safety Technology Program

International Nuclear Information System (INIS)

Miller, W.J.

1980-05-01

This report is the result of approximately two man-months of effort devoted to assimilating and comprehending significant publicly available material related to Three Mile Island Unit 2 and events during and subsequent to the accident experienced on March 28, 1979. Those events were then correlated with the Preliminary LWR Safety Technology Program Plan (Preliminary Program Plan) prepared for the US Department of Energy by Sandia National Lab. This report is being submitted simultaneously with the SAI report entitled Preliminary Prioritization of Tasks in the Draft LWR Safety Technology Program Plan

Review of literature on the TMI accident and correlation to the LWR Safety Technology Program

Energy Technology Data Exchange (ETDEWEB)

Miller, W.J.

1980-05-01

This report is the result of approximately two man-months of effort devoted to assimilating and comprehending significant publicly available material related to Three Mile Island Unit 2 and events during and subsequent to the accident experienced on March 28, 1979. Those events were then correlated with the Preliminary LWR Safety Technology Program Plan (Preliminary Program Plan) prepared for the US Department of Energy by Sandia National Lab. This report is being submitted simultaneously with the SAI report entitled Preliminary Prioritization of Tasks in the Draft LWR Safety Technology Program Plan.

VRLane: a desktop virtual safety management program for underground coal mine

Science.gov (United States)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

Experience in the implementation of quality assurance program and safety culture assessment of research reactor operation and maintenance

International Nuclear Information System (INIS)

Syarip; Suryopratomo, K.

2001-01-01

The implementation of quality assurance program and safety culture for research reactor operation are of importance to assure its safety status. It comprises an assessment of the quality of both technical and organizational aspects involved in safety. The method for the assessment is based on judging the quality of fulfillment of a number of essential issues for safety i.e. through audit, interview and/or discussions with personnel and management in plant. However, special consideration should be given to the data processing regarding the fuzzy nature of the data i.e. in answering the questionnaire. To accommodate this situation, the SCAP, a computer program based on fuzzy logic for assessing plant safety status, has been developed. As a case study, the experience in the assessment of Kartini research reactor safety status shows that it is strongly related to the implementation of quality assurance program in reactor operation and awareness of reactor operation staffs to safety culture practice. It is also shown that the application of the fuzzy rule in assessing reactor safety status gives a more realistic result than the traditional approach. (author)

A web-based tool for the Comprehensive Unit-based Safety Program (CUSP).

Science.gov (United States)

Pronovost, Peter J; King, Jay; Holzmueller, Christine G; Sawyer, Melinda; Bivens, Shauna; Michael, Michelle; Haig, Kathy; Paine, Lori; Moore, Dana; Miller, Marlene

2006-03-01

An organization's ability to change is driven by its culture, which in turn has a significant impact on safety. The six-step Comprehensive Unit-Based Safety Program (CUSP) is intended to improve local culture and safety. A Web-based project management tool for CUSP was developed and then pilot tested at two hospitals. HOW ECUSP WORKS: Once a patient safety concern is identified (step 3), a unit-level interdisciplinary safety committee determines issue criticality and starts up the projects (step 4), which are managed using project management tools within eCUSP (step 5). On a project's completion, the results are disseminated through a shared story (step 6). OSF St. Joseph's Medical Center-The Medical Birthing Center (Bloomington, Illinois), identified 11 safety issues, implemented 11 projects, and created 9 shared stories--including one for its Armband Project. The Johns Hopkins Hospital (Baltimore) Medical Progressive Care (MPC4) Unit identified 5 safety issues and implemented 4 ongoing projects, including the intravenous (IV) Tubing Compliance Project. The eCUSP tool's success depends on an organizational commitment to creating a culture of safety.

77 FR 63873 - Johnson Controls, Inc. Including On-Site Leased Workers of Valley Staffing and AZ Quality Hudson...

Science.gov (United States)

2012-10-17

... workers of Johnson Controls, Inc., including on-site leased workers from Valley Staffing, Hudson..., Wisconsin location of Johnson Controls, Inc. The Department has determined that these workers were sufficiently under the control of the subject firm to be considered leased workers. Based on these findings...

Federal Aviation Administration weather program to improve aviation safety

Science.gov (United States)

Wedan, R. W.