The practical implementation of integrated safety management for nuclear safety analysis and fire hazards analysis documentation

International Nuclear Information System (INIS)

COLLOPY, M.T.

1999-01-01

In 1995 Mr. Joseph DiNunno of the Defense Nuclear Facilities Safety Board issued an approach to describe the concept of an integrated safety management program which incorporates hazard and safety analysis to address a multitude of hazards affecting the public, worker, property, and the environment. Since then the U S . Department of Energy (DOE) has adopted a policy to systematically integrate safety into management and work practices at all levels so that missions can be completed while protecting the public, worker, and the environment. While the DOE and its contractors possessed a variety of processes for analyzing fire hazards at a facility, activity, and job; the outcome and assumptions of these processes have not always been consistent for similar types of hazards within the safety analysis and the fire hazard analysis. Although the safety analysis and the fire hazard analysis are driven by different DOE Orders and requirements, these analyses should not be entirely independent and their preparation should be integrated to ensure consistency of assumptions, consequences, design considerations, and other controls. Under the DOE policy to implement an integrated safety management system, identification of hazards must be evaluated and agreed upon to ensure that the public. the workers. and the environment are protected from adverse consequences. The DOE program and contractor management need a uniform, up-to-date reference with which to plan. budget, and manage nuclear programs. It is crucial that DOE understand the hazards and risks necessarily to authorize the work needed to be performed. If integrated safety management is not incorporated into the preparation of the safety analysis and the fire hazard analysis, inconsistencies between assumptions, consequences, design considerations, and controls may occur that affect safety. Furthermore, confusion created by inconsistencies may occur in the DOE process to grant authorization of the work. In accordance with

Expanding the scope of practice for radiology managers: radiation safety duties.

Science.gov (United States)

Orders, Amy B; Wright, Donna

2003-01-01

In addition to financial responsibilities and patient care duties, many medical facilities also expect radiology department managers to wear "safety" hats and complete fundamental quality control/quality assurance, conduct routine safety surveillance in the department, and to meet regulatory demands in the workplace. All managers influence continuous quality improvement initiatives, from effective utilization of resource and staffing allocations, to efficacy of patient scheduling tactics. It is critically important to understand continuous quality improvement (CQI) and its relationship with the radiology manager, specifically quality assurance/quality control in routine work, as these are the fundamentals of institutional safety, including radiation safety. When an institution applies for a registration for radiation-producing devices or a license for the use of radioactive materials, the permit granting body has specific requirements, policies and procedures that must be satisfied in order to be granted a permit and to maintain it continuously. In the 32 U.S. Agreement states, which are states that have radiation safety programs equivalent to the Nuclear Regulatory Commission programs, individual facilities apply for permits through the local governing body of radiation protection. Other states are directly licensed by the Nuclear Regulatory Commission and associated regulatory entities. These regulatory agencies grant permits, set conditions for use in accordance with state and federal laws, monitor and enforce radiation safety activities, and audit facilities for compliance with their regulations. Every radiology department and associated areas of radiation use are subject to inspection and enforcement policies in order to ensure safety of equipment and personnel. In today's business practice, department managers or chief technologists may actively participate in the duties associated with institutional radiation safety, especially in smaller institutions, while

Healthy Choices for Every Body Adult Curriculum Improves Participants' Food Resource Management Skills and Food Safety Practices.

Science.gov (United States)

Adedokun, Omolola A; Plonski, Paula; Jenkins-Howard, Brooke; Cotterill, Debra B; Vail, Ann

2018-04-03

To evaluate the impact of the University of Kentucky's Healthy Choices for Every Body (HCEB) adult nutrition education curriculum on participants' food resource management (FRM) skills and food safety practices. A quasi-experimental design was employed using propensity score matching to pair 8 intervention counties with 8 comparison counties. Independent-samples t tests and ANCOVA models compared gains in FRM skills and food safety practices between the intervention and comparison groups (n = 413 and 113, respectively). Propensity score matching analysis showed a statistical balance and similarities between the comparison and intervention groups. Food resource management and food safety gain scores were statistically significantly higher for the intervention group (P food safety practices of participants. Copyright © 2018 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Occupational health and safety management practices and musculoskeletal disorders in aged care.

Science.gov (United States)

Oakman, Jodi; Bartram, Timothy

2017-05-15

Purpose The purpose of this paper is to examine whether occupational health and safety (OHS) management used to manage musculoskeletal disorders (MSDs) in the aged care sector reflects contemporary research evidence of best practice to reduce the incidence of these disorders. Design/methodology/approach In total, 58 interviews were conducted with managers and supervisors in the aged care sector across four organisations in Australia. Policies and procedures relating to MSDs were reviewed for each organisation. Findings Policies and procedures for managing MSDs do not reflect contemporary evidence, which supports a complex aetiology, related to a range of physical and psychosocial workplace factors. Despite strong evidence that psychosocial factors contribute to MSD development, these were not included in the policies and procedures reviewed. Findings from the interviews management practices including leadership and various components of HRM were functioning well but fragmentation was evident due to the challenging nature of the aged care sector. Practical implications To address the significant burden of MSDs in the aged care sector, policies and procedures need to include coverage of psychosocial and physical workplace factors. The development of systematic and integrated OHS management at the workplace level may play an important role in the effective management of MSDs. Originality/value This study offers insights into the previously unexplored area of MSD risk management and the role of management practices such as HRM in the aged care sector.

75 FR 48992 - Baseline Safety and Health Practices; Office of Management and Budget's (OMB) Approval of...

Science.gov (United States)

2010-08-12

...] Baseline Safety and Health Practices; Office of Management and Budget's (OMB) Approval of Information... health practices of private sector establishments in agriculture (with 10 or more workers) and non... monitor and more effectively implement practices to mitigate workplace hazards, thereby reducing the...

Management of safety and safety culture at the NPPs of Ukraine

International Nuclear Information System (INIS)

Koltakov, Vladimir

2002-01-01

The report contains general aspects of safety and safety culture. The brief description of operational characteristics and basic indexes of atomic power plants at the Ukraine are represented. The information referring to structure of NPPs of Operation organization license-holder, safety responsibility of both Regulatory and Utility Bodies also is given. The main part of the report include seven sections: 1. Practical application of safety management models; 2. erspective on the relationship between safety management and safety culture; 3. The role of leadership in achieving high standards of safety; 4. Current and future challengers that impact on safety culture and safety management (e.g. the impact of competition, changing, economic and political circumstances, workforce demographics, etc.); 5. Key lessons learned from major events; 6. Practical applications of safety culture concepts (e.g. learning organizations, training staff communications, etc.); 7. dvance in human performance. Some of the main pending safety and safety culture problems that are necessary to achieve in the near future are mentioned

Country differences of psychosocial working conditions in Europe: the role of health and safety management practices.

Science.gov (United States)

Lunau, Thorsten; Dragano, Nico; Siegrist, Johannes; Wahrendorf, Morten

2017-10-01

In times of demographic change, maintaining health and employability of older employees is important. In this context, studies show that stressful working conditions differ by countries. Yet, it is unclear if specific national management practices to deal with these conditions contribute towards explaining country differences. This study combines two different data sources. The first one provides detailed information on psychosocial working conditions in 17 European countries, based on 12,284 employees from the Survey of Health, Ageing and Retirement in Europe (SHARE) and the English Longitudinal Study of Ageing (ELSA). We link this information to the second data source that provides information on health and safety management practices in each of the countries under study (collected among 17,477 managers at the level of companies in the Enterprise survey on new and emerging risks (ESENER)). We distinguish six different types of risk management procedures in the analysis. Results show that levels of psychosocial risks are generally lower in countries with more developed management practices, in particular if national management practices are marked by (1) procedures to deal with work stress, (2) information about whom to address in case of work-related psychosocial problems, and (3) health and safety services provided by psychologists. The findings underline the importance of a comprehensive psychosocial risk management approach in reducing work-related stress, as lower levels of psychosocial risks are linked to specific psychosocial risk management practices within companies, in particular those pointing to clear responsibilities and coordinated procedures in dealing with psychosocial risks.

Relation of management, supervision, and personnel practices to nuclear power plant safety

International Nuclear Information System (INIS)

Layton, W.L.; Turnage, J.J.

1980-01-01

The knowledge base of industrial/organization psychology suggests three major areas of research with important implications for nuclear power plant safety. These areas are: Management and Supervision: Personnel Selection, Training and Placement; and Organizational Climate. Evidence drawn from several Three Mile Island investigations confirms that organizational structure of plants and supervisory practices, the selection and training of personnel, and organizational climate are important factors. Difficulties in decision making and coordination of personnel are pinpointed. Deficiencies in training are highlighted and the climate of working atmosphere is discussed. These matters are related to nuclear power plant safety. Future research directions are presented

Safety climate practice in Korean manufacturing industry

International Nuclear Information System (INIS)

Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P.

2008-01-01

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended

Safety climate practice in Korean manufacturing industry.

Science.gov (United States)

Baek, Jong-Bae; Bae, Sejong; Ham, Byung-Ho; Singh, Karan P

2008-11-15

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

Safety climate practice in Korean manufacturing industry

Energy Technology Data Exchange (ETDEWEB)

Baek, Jong-Bae [Department of Safety Engineering, Chungju National University, Chungju 380-702 (Korea, Republic of); Bae, Sejong [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)], E-mail: sbae@hsc.unt.edu; Ham, Byung-Ho [Department of Industrial Safety, Ministry of Labor (Korea, Republic of); Singh, Karan P. [Department of Biostatistics, University of North Texas Health Science Center, 3500 Camp Bowie Boulevard, Fort Worth, TX 76107 (United States)

2008-11-15

Safety climate survey was sent to 642 plants in 2003 to explore safety climate practices in the Korean manufacturing plants, especially in hazardous chemical treating plants. Out of 642 plants contacted 195 (30.4%) participated in the surveys. Data were collected by e-mail using SQL-server and mail. The main objective of this study was to explore safety climate practices (level of safety climate and the underlying problems). In addition, the variables that may influence the level of safety climate among managers and workers were explored. The questionnaires developed by health and safety executive (HSE) in the UK were modified to incorporate differences in Korean culture. Eleven important factors were summarized. Internal reliability of these factors was validated. Number of employees in the company varied from less than 30 employees (9.2%) to over 1000 employees (37.4%). Both managers and workers showed generally high level of safety climate awareness. The major underlying problems identified were inadequate health and safety procedures/rules, pressure for production, and rule breaking. The length of employment was a significant contributing factor to the level of safety climate. In this study, participants showed generally high level of safety climate, and length of employment affected the differences in the level of safety climate. Managers' commitment to comply safety rules, procedures, and effective safety education and training are recommended.

Effect of national cultural values on safety climate, and safety management system

International Nuclear Information System (INIS)

Ali, T.H.; Memon, N.A.

2008-01-01

This paper investigates the critical role played by the national culture in influencing how workers safely or otherwise behave (mainly in risky situations) on construction sites, and how site managers implement safety management processes and practices. The paper presents the findings of an empirical research study based on a questionnaire survey, administered in Pakistan, targeting construction site managers and workers to gauge the effect national culture has on managers preferences for and perceptions of safety management systems (policies and practices) and than linking this effect to predict workers attitudes and intentional behaviors. (author)

Safety Management and Safety Culture Self Assessment of Kartini Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Syarip, S., E-mail: syarip@batan.go.id [Centre for Accelerator and Material Process Technology, National Nuclear Energy Agency (BATAN), Yogyakarta (Indonesia)

2014-10-15

The self-assessment of safety culture and safety management status of Kartini research reactor is a step to foster safety culture and management by identifying good practices and areas for improvement, and also to improve reactor safety in a whole. The method used in this assessment is based on questionnaires provided by the Forum for Nuclear Cooperation in Asia (FNCA), then reviewed by experts. Based on the assessment and evaluation results, it can be concluded that there were several good practices in maintaining the safety status of Kartini reactor such as: reactor operators and radiation protection workers were aware and knowledgeable of the safety standards and policies that apply to their operation, readily accept constructive criticism from their management and from the inspectors of regulatory body that address safety performance. As a proof, for the last four years the number of inspection/audit findings from Regulatory Body (BAPETEN) tended to decrease while the reactor utilization and its operating hour increased. On the other hands there were also some comments and recommendations for improvement of reactor safety culture, such as that there should be more frequent open dialogues between employees and managers, to grow and attain a mutual support to achieve safety goals. (author)

Evaluating safety management system implementation

International Nuclear Information System (INIS)

Preuss, M.

2009-01-01

Canada is committed to not only maintaining, but also improving upon our record of having one of the safest aviation systems in the world. The development, implementation and maintenance of safety management systems is a significant step towards improving safety performance. Canada is considered a world leader in this area and we are fully engaged in implementation. By integrating risk management systems and business practices, the aviation industry stands to gain better safety performance with less regulatory intervention. These are important steps towards improving safety and enhancing the public's confidence in the safety of Canada's aviation system. (author)

Study on Food Quality and Safety Management Based on Hotel Management

OpenAIRE

Shi Zengye

2017-01-01

In recent years, with the frequent occurrence of food safety problems, people have begun to pay attention to food safety, especially the food safety of hotels. This paper proposed a Hazard Analysis and Critical Control Point (HACCP) management system to analyze food safety issues of hotels in order to improve the food quality and safety in hotel management. Through the practical application of the HACCP management system in the hotel catering industry, it was found that the amount of bacteria...

The use of a basic safety investment model in a practical risk management context

International Nuclear Information System (INIS)

Aven, Terje; Hiriart, Yolande

2011-01-01

We consider a basic model in economic safety analysis: a firm is willing to invest an amount x in safety measures to avoid an accident A, which in the case of occurrence, leads to a loss of size L. The probability of an accident is a function of x. The optimal value of x is determined by minimizing the expected costs. In the paper, we re-examine this model by adopting a practical risk/safety management perspective. We question how this model can be used for guiding the firm and regulators in determining the proper level of investment in safety. Attention is given to issues like how to determine the probability of an accident and how to take into account uncertainties that extend beyond the expected value. It is concluded that the model, with suitable extensions and if properly implemented, provides a valuable decision support tool. By focusing on investment levels and stimulating thereby the generation of alternative risk-reducing measures, the model is considered particularly useful in risk reduction (ALARP) processes. - Highlights: → It is shown how to use a basic investment model in a practical risk management setting. → The model may be a valuable decision support tool if properly implemented. → It guides decision makers on risk reduction and how to determine what is ALARP. → The model stimulates the generation of alternative risk-reducing measures.

ASSESSMENT OF FOOD SAFETY PRACTICES AMONG CASSAVA ...

African Journals Online (AJOL)

Philips Olusola

public policies on food safety management. ... in the contemporary world and a significant factor in the reduction of productivity. There is some .... adduced to the views of the majority who considered food safety practices a big ..... Contingency.

FOOD QUALITY MANAGEMENT AND SAFETY

OpenAIRE

Rizwana Khatoon; Debkumar Chakraborty; R.C. Chandni; Amar Sankar; A.V. Raghu

2017-01-01

Food safety system mainly focuses on identifying and preventing hazards that may lead product to deteriorate. The main important of manufacturing practice is a system that ensures that products meet food safety, quality and legal requirements. The hazard analysis and critical control point system, applies to food safety management, uses the approach of controlling critical points in food handling to prevent food safety problems. Besides enhancing food safety, other benefits of applying HACCP ...

Safety management: a few techniques and their application

International Nuclear Information System (INIS)

Soundararajan, S.

2016-01-01

Industrial safety practice has grown in its stature tremendously since the age of industrial revolution. A number of modern techniques are available to strengthen design safety features, to review operational safety, and to critically appraise and upgrade practices of occupational safety and health management. This talk focuses on three prominent yet simple techniques and their usefulness in the overall safety management of a workplace. Any industrial set-up undergoes different stages in its life cycle-conceptual design, actual design, construction, fabrication and installation, commissioning, operation, shutdown/re-start up and decommissioning. Checklist procedure is a safety tool that can be applied at any of these stages. Thus it is a quite useful technique in safety management and accident prevention. It can serve as a form of approval from one step to another in the course of any routine or specific task. Safety Audit or Safety Review is a critical safety management appraisal tool. It gives a reasonable indication of how well a company's safety programme works, how hazards are recognised, how well employees are motivated and so on. It gives a clear picture about where a company stands as far as framing and implementation of its SHE policy is concerned. Each of the above tools is complementing each other and required to be applied at appropriate juncture in sustaining good safety management system at the workplace

Study on Food Quality and Safety Management Based on Hotel Management

Directory of Open Access Journals (Sweden)

Shi Zengye

2017-12-01

Full Text Available In recent years, with the frequent occurrence of food safety problems, people have begun to pay attention to food safety, especially the food safety of hotels. This paper proposed a Hazard Analysis and Critical Control Point (HACCP management system to analyze food safety issues of hotels in order to improve the food quality and safety in hotel management. Through the practical application of the HACCP management system in the hotel catering industry, it was found that the amount of bacteria greatly reduced and the pass rate of tableware disinfection increased significantly in the hotel's food processing links, while customer satisfaction greatly improved. Therefore, the HACCP management system had great applicability in improving the food quality and safety of hotels.

Data collection and record keeping for the management of nuclear power plant ageing: A safety practice

International Nuclear Information System (INIS)

1991-01-01

This Safety Practice is the first in a series of reports under the programme on the management of nuclear power plant ageing. The purpose of the programme is to facilitate the exchange of information and to promote co-operation among Member States towards understanding and managing the ageing degradation of components, with the aim of maintaining safe and reliable plant operation. The availability and evaluation of appropriate data on nuclear power plant components are essential to safety and constitute a key factor in plant life extension considerations. The present publication provides guidance on data requirements and an effective and practical system for data collection and record keeping in relation to the evaluation and management of ageing and service life. This guidance is based on current practices. It is envisaged that the application of the guidance will contribute to the safe and reliable operation of nuclear power plants and will facilitate international information exchange on ageing related component failures, malfunctions and degradation, since data collected using the same ground rules would be easier to exchange and compare. The guidance is intended primarily for the management, maintenance and technical staff of nuclear power plants, on whom the ultimate success of the recommended system and its associated benefits depend. Intended secondary audiences include utility management and central technical support organizations, regulatory bodies, standards organizations, design companies, and research and development institutes. 8 refs, 1 fig., 1 tab

Safety management in nuclear technology. Proceedings

International Nuclear Information System (INIS)

2008-01-01

mistakes in the future? An approach for the enhancement of safety and reliability of processes and activities (R. Miller); (17) A systematic and holistic evaluation of safety management systems: Experience from an expert practice (M. Richter); (18) Auditing and certification of safety management systems as an integral component of integrated management systems both inland and abroad (T. Pfalz).

Differences in Hospital Managers', Unit Managers', and Health Care Workers' Perceptions of the Safety Climate for Respiratory Protection.

Science.gov (United States)

Peterson, Kristina; Rogers, Bonnie M E; Brosseau, Lisa M; Payne, Julianne; Cooney, Jennifer; Joe, Lauren; Novak, Debra

2016-07-01

This article compares hospital managers' (HM), unit managers' (UM), and health care workers' (HCW) perceptions of respiratory protection safety climate in acute care hospitals. The article is based on survey responses from 215 HMs, 245 UMs, and 1,105 HCWs employed by 98 acute care hospitals in six states. Ten survey questions assessed five of the key dimensions of safety climate commonly identified in the literature: managerial commitment to safety, management feedback on safety procedures, coworkers' safety norms, worker involvement, and worker safety training. Clinically and statistically significant differences were found across the three respondent types. HCWs had less positive perceptions of management commitment, worker involvement, and safety training aspects of safety climate than HMs and UMs. UMs had more positive perceptions of management's supervision of HCWs' respiratory protection practices. Implications for practice improvements indicate the need for frontline HCWs' inclusion in efforts to reduce safety climate barriers and better support effective respiratory protection programs and daily health protection practices. © 2016 The Author(s).

The practical implementation of safety culture

Energy Technology Data Exchange (ETDEWEB)

Touzet, Rodolfo [Comision Nacional de Energia Atomica, Buenos Aires. (Argentina)

2008-07-01

When, during the review of the Chernobyl accident, the INSAG Committee introduced the term 'Safety Culture', it spread very quickly. Later on, as a result of activities sponsored by the IAEA, the original Safety Culture concept was extended to include a large number of issues that are typical requirements of Quality Assurance Unfortunately, the way in which certain organizations approached this subject has not helped to find the right way for it to be implemented. Safety Culture is not mentioned at all in ICRP-60 and in the new recommendations of 2005 it does not even appear in the principal body and only a minor reference exists. The IAEA's Basic Safety Standards deal with the requirements for Safety Culture and for Quality Assurance as absolutely individual issues; however, Safety Culture should be considered as a part of the Quality System. Very recently the situation was strongly improved by the release of the new standard 'The Management System for Facilities and Activities' Safety Requirements GS-R-3. The EURATOM 97/43 Directive, used in the European Community for the preparation of regulations for medical practice, which, while inspired by ICRP-73, does not even mention Safety Culture. Increasing personnel training is not enough if, at the same time, there are no activities aimed at improving their attitude towards quality and safety. To achieve a change in Culture in the organization or to implant the new concept, there must be a suitable supporting Methodology to allow it to be put into practice. If not, the Safety Culture will only be a simple expression of wishes without any chance of success. Criteria, methodology and effective practical tools must be available. Two basic principles for the management system (GSR-3): a) All the tasks may be considered as 'a system of interactive processes'; b) All persons must take part in order to achieve safety and quality. These two principles are the basis of the strategy for the development of a Safety Culture

The practical implementation of safety culture

International Nuclear Information System (INIS)

Touzet, Rodolfo

2008-01-01

When, during the review of the Chernobyl accident, the INSAG Committee introduced the term 'Safety Culture', it spread very quickly. Later on, as a result of activities sponsored by the IAEA, the original Safety Culture concept was extended to include a large number of issues that are typical requirements of Quality Assurance Unfortunately, the way in which certain organizations approached this subject has not helped to find the right way for it to be implemented. Safety Culture is not mentioned at all in ICRP-60 and in the new recommendations of 2005 it does not even appear in the principal body and only a minor reference exists. The IAEA's Basic Safety Standards deal with the requirements for Safety Culture and for Quality Assurance as absolutely individual issues; however, Safety Culture should be considered as a part of the Quality System. Very recently the situation was strongly improved by the release of the new standard 'The Management System for Facilities and Activities' Safety Requirements GS-R-3. The EURATOM 97/43 Directive, used in the European Community for the preparation of regulations for medical practice, which, while inspired by ICRP-73, does not even mention Safety Culture. Increasing personnel training is not enough if, at the same time, there are no activities aimed at improving their attitude towards quality and safety. To achieve a change in Culture in the organization or to implant the new concept, there must be a suitable supporting Methodology to allow it to be put into practice. If not, the Safety Culture will only be a simple expression of wishes without any chance of success. Criteria, methodology and effective practical tools must be available. Two basic principles for the management system (GSR-3): a) All the tasks may be considered as 'a system of interactive processes'; b) All persons must take part in order to achieve safety and quality. These two principles are the basis of the strategy for the development of a Safety Culture

The determinants of employee participation in occupational health and safety management.

Science.gov (United States)

Masso, Märt

2015-01-01

This article focuses on employee direct participation in occupational health and safety (OHS) management. The article explains what determines employee opportunities to participate in OHS management. The explanatory framework focuses on safety culture and safety management at workplaces. The framework is empirically tested using Estonian cross-sectional, multilevel data of organizations and their employees. The analysis indicates that differences in employee participation in OHS management in the Estonian case could be explained by differences in OHS management practices rather than differences in safety culture. This indicates that throughout the institutional change and shift to the European model of employment relations system, change in management practices has preceded changes in safety culture which according to theoretical argument is supposed to follow culture change.

Ethical issues in patient safety: Implications for nursing management.

Science.gov (United States)

Kangasniemi, Mari; Vaismoradi, Mojtaba; Jasper, Melanie; Turunen, Hannele

2013-12-01

The purpose of this article is to discuss the ethical issues impacting the phenomenon of patient safety and to present implications for nursing management. Previous knowledge of this perspective is fragmented. In this discussion, the main drivers are identified and formulated in 'the ethical imperative' of patient safety. Underlying values and principles are considered, with the aim of increasing their visibility for nurse managers' decision-making. The contradictory nature of individual and utilitarian safety is identified as a challenge in nurse management practice, together with the context of shared responsibility and identification of future challenges. As a conclusion, nurse managers play a strategic role in patient safety. Their role is to incorporate ethical values of patient safety into decision-making at all levels in an organization, and also to encourage clinical nurses to consider values in the provision of care to patients. Patient safety that is sensitive to ethics provides sustainable practice where the humanity and dignity of all stakeholders are respected.

Improving operational safety management through probabilistic safety assessment on personal computers

International Nuclear Information System (INIS)

1988-10-01

The Technical Committee Meeting considered the current effort in the implementation and use of PSA information for day-to-day operational safety management on Personal Computers. Due to the very recent development of the necessary hardware and software for Personal Computers, the application of PSA information for day-to-day operational safety management on PCs is essentially still in a pioneering stage. There is at present only one such system for end users existing, the PRISIM (Plant Risk Status Information Management) program for which a limited practical application experience is available. Others are still in the development stage. The main aim of the Technical Committee Meeting was to discuss the present status of PSA based systems for operational safety management support on small computers, to consider practical aspects when implementing these systems into a nuclear installation and to address problems related to the further work in the area. A separate abstract was prepared for the summary of the Technical Committee Meeting and for the 8 papers presented by the participants. Refs, figs and tabs

Integration of radiation protection in safety management: sharing best practices between radiation protection and other safety areas

International Nuclear Information System (INIS)

Kockerols, Pierre; Fessler, Andreas

2008-01-01

Full text: The Institute for Reference Materials and Measurements (IRMM) located in Geel is one of the seven institutes of the Joint Research Centre of the European Commission (EC, DG JRC). The institute was founded in 1960 as a nuclear research centre, but has gradually shifted its activities to also include 'non-nuclear' domains, mainly in the areas of food safety and environmental surveillance. As the activities on the IRMM site are currently quite diversified, they necessitate the operation of nuclear controlled areas, accelerators, as well as bio safety restricted areas and chemical laboratories. Therefore, the care for occupational health and safety and for environmental protection has to take into consideration various types of hazards and threats. Recently an integrated management system according to ISO-9001, ISO-14001 and OHSAS-18001 was implemented. The integrated system combines 'vertically' quality, occupational health and safety and environmental issues and covers 'horizontally' the nuclear, biological and chemical fields. The paper outlines how the radiation protection can be included in an overall health, safety and environmental management system. It will give various practical examples where synergies can be applied: 1-) the overall policy; 2-) The assessment and ranking of all risks and the identification, in a combined way, of the appropriate prevention measures; 3-) The planning and review of related actions; 4-) The monitoring, auditing and registration of anomalies and incidents and the definition of corrective actions; 5-) The training of personnel based on lessons learned from past experiences; 6-) The organisation of an internal emergency plan dealing with nuclear and non-nuclear hazards. Based on these examples, the benefits of having an integrated approach are commented. In addition, the paper will illustrate how the recent ICRP fundamental recommendations and more particularly some of the principles of radiation protection such as

Safety Management Practices in Small and Medium Enterprises in India

Directory of Open Access Journals (Sweden)

Seema Unnikrishnan

2015-03-01

Conclusion: Competition between SMEs was found to be major reason for implementation of safety practices in the SMEs. The major contribution of the study has been awareness building on safety issues in the SMEs that participated in the project.

Implementation of safety management systems in Hong Kong construction industry - A safety practitioner's perspective.

Science.gov (United States)

Yiu, Nicole S N; Sze, N N; Chan, Daniel W M

2018-02-01

In the 1980s, the safety management system (SMS) was introduced in the construction industry to mitigate against workplaces hazards, reduce the risk of injuries, and minimize property damage. Also, the Factories and Industrial Undertakings (Safety Management) Regulation was introduced on 24 November 1999 in Hong Kong to empower the mandatory implementation of a SMS in certain industries including building construction. Therefore, it is essential to evaluate the effectiveness of the SMS in improving construction safety and identify the factors that influence its implementation in Hong Kong. A review of the current state-of-the-practice helped to establish the critical success factors (CSFs), benefits, and difficulties of implementing the SMS in the construction industry, while structured interviews were used to establish the key factors of the SMS implementation. Results of the state-of-the-practice review and structured interviews indicated that visible senior commitment, in terms of manpower and cost allocation, and competency of safety manager as key drivers for the SMS implementation. More so, reduced accident rates and accident costs, improved organization framework, and increased safety audit ratings were identified as core benefits of implementing the SMS. Meanwhile, factors such as insufficient resources, tight working schedule, and high labor turnover rate were the key challenges to the effective SMS implementation in Hong Kong. The findings of the study were consistent and indicative of the future development of safety management practice and the sustainable safety improvement of Hong Kong construction industry in the long run. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Food Safety Practices in the Egg Products Industry.

Science.gov (United States)

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

A survey on management perspectives of the state of workplace health and safety practices in Kenya.

Science.gov (United States)

Mbakaya, C F; Onyoyo, H A; Lwaki, S A; Omondi, O J

1999-07-01

A baseline survey was conducted in 1995 on management perspectives of occupational health and safety (OHS) structures and practices in Kenya. This was achieved by interviewing management and supervisory staff attending 1 week multi-disciplinary courses that were organized by the Federation of Kenya Employers (FKE) and the International Labour Office (ILO) at hotel venues in Kenya. The purpose of the survey was to gain some insight into work safety conditions in Kenya and to assess the potential for a new OHS manual to meet existing knowledge gaps. The manual was locally developed in 1993/4 by Kenyan OHS experts in collaboration with colleagues from the Swedish National Institute for Working Life. Results of the survey from 65 participants indicated that most workplace managers were not familiar with the Kenyan work safety legislation. Work injuries were largely attributable to working with dangerous machinery. Occupational diseases and HIV/AIDS were cited as other causes of workplace morbidity and mortality. Although most respondents (70%) were satisfied with their work safety conditions, only 37% said their workplaces were annually audited by labour inspectors while 45% said injured workers were not treated well by management. Many workplaces (65%) violated the mandatory legal requirement on the establishment of health and safety committees. The OHS resource person and course content were rated highly by most respondents (96%). The foregoing results provided the basis of a needs analysis for future OHS programs in Kenya.

Safety, Health, and Environmental Auditing A Practical Guide

CERN Document Server

Pain, Simon Watson

2010-01-01

A practical guide to environmental, safety, and occupational health audits. It allows organizations and business to avoid expensive external auditors and retain the knowledge and learning 'in-house'. It allows any competent manager or safety/environmental officer to undertake in-house audits in a competent and reproducible fashion.

Radiation safety management system in a radioactive facility

International Nuclear Information System (INIS)

Amador, Zayda H.

2008-01-01

Full text: This paper illustrates the Cuban experience in implementing and promoting an effective radiation safety system for the Centre of Isotopes, the biggest radioactive facility of our country. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. All those areas of the radiation protection program are considered (e.g. licensing and training of the staff, occupational exposure, authorization of the practices, control of the radioactive material, radiological occurrences, monitoring equipment, radioactive waste management, public exposure due to airborne effluents, audits and safety costs). A set of indicators designed to monitor key aspects of operational safety performance are used. Their trends over a period of time are analyzed with the modern information technologies, because this can provide an early warning to plant management for searching causes behind the observed changes. In addition to analyze the changes and trends, these indicators are compared against identified targets and goals to evaluate performance strengths and weaknesses. A structured and proper radiation self-auditing system is seen as a basic requirement to meet the current and future needs in sustainability of radiation safety. The integrated safety management system establishment has been identified as a goal and way for the continuous improvement. (author)

Safe waste management practices in beryllium facilities

International Nuclear Information System (INIS)

Bhat, P.N.; Soundararajan, S.; Sharma, D.N.

2012-01-01

Beryllium, an element with the atomic symbol Be, atomic number 4, has very high stiffness to weight ratio and low density. It has good electrical conductive properties with low coefficient of thermal expansion. These properties make the metal beryllium very useful in varied technological endeavours, However, beryllium is recognised as one of the most toxic metals. Revelation of toxic effects of beryllium resulted in institution of stringent health and safety practices in beryllium handling facilities. The waste generated in such facilities may contain traces of beryllium. Any such waste should be treated as toxic waste and suitable safe waste management practices should be adopted. By instituting appropriate waste management practice and through a meticulously incorporated safety measures and continuous surveillance exercised in such facilities, total safety can be ensured. This paper broadly discusses health hazards posed by beryllium and safe methods of management of beryllium bearing wastes. (author)

Electronic health records and patient safety: co-occurrence of early EHR implementation with patient safety practices in primary care settings.

Science.gov (United States)

Tanner, C; Gans, D; White, J; Nath, R; Pohl, J

2015-01-01

The role of electronic health records (EHR) in enhancing patient safety, while substantiated in many studies, is still debated. This paper examines early EHR adopters in primary care to understand the extent to which EHR implementation is associated with the workflows, policies and practices that promote patient safety, as compared to practices with paper records. Early adoption is defined as those who were using EHR prior to implementation of the Meaningful Use program. We utilized the Physician Practice Patient Safety Assessment (PPPSA) to compare primary care practices with fully implemented EHR to those utilizing paper records. The PPPSA measures the extent of adoption of patient safety practices in the domains: medication management, handoffs and transition, personnel qualifications and competencies, practice management and culture, and patient communication. Data from 209 primary care practices responding between 2006-2010 were included in the analysis: 117 practices used paper medical records and 92 used an EHR. Results showed that, within all domains, EHR settings showed significantly higher rates of having workflows, policies and practices that promote patient safety than paper record settings. While these results were expected in the area of medication management, EHR use was also associated with adoption of patient safety practices in areas in which the researchers had no a priori expectations of association. Sociotechnical models of EHR use point to complex interactions between technology and other aspects of the environment related to human resources, workflow, policy, culture, among others. This study identifies that among primary care practices in the national PPPSA database, having an EHR was strongly empirically associated with the workflow, policy, communication and cultural practices recommended for safe patient care in ambulatory settings.

Healthcare waste management practices and safety indicators in Nigeria.

Science.gov (United States)

Oyekale, Abayomi Samuel; Oyekale, Tolulope Olayemi

2017-09-25

Adequate management of healthcare waste (HCW) is a prerequisite for efficient delivery of healthcare services. In Nigeria, there are several constraints militating against proper management of HCW. This is raising some environmental concerns among stakeholders in the health sector. In this study, we analyzed the practices of HCW management and determinants of risky/safe indices of HCW disposal. The study used the 2013/2014 Service Delivery Indicator (SDI) data that were collected from 2480 healthcare facilities in Nigeria. Descriptive statistics, Principal Component Analysis (PCA) and Ordinary Least Square (OLS) regression were used to analyze the data. The results showed that 52.20% and 38.21% of the sampled healthcare facilities from Cross River and Bauchi states possessed guidelines for HCW management, respectively. Trainings on management of HCW were attended by 67.18% and 53.19% of the healthcare facilities from Cross River and Imo states, respectively. Also, 32.32% and 29.50% of healthcare facilities from rural and urban areas previously sent some of their staff members for trainings on HCW management, respectively. Sharp and non-sharp HCW were burnt in protected pits in 45.40% and 45.36% of all the sampled healthcare facilities, respectively. Incinerators were reported to be functional in only 2.06% of the total healthcare facilities. In Bauchi and Kebbi states, 23.58% and 21.05% of the healthcare facilities respectively burnt sharp HCW without any protection. Using PCA, computed risky indices for disposal of sharp HCW were highest in Bayelsa state (0.3070) and Kebbi state (0.2172), while indices of risky disposal of non-sharp HCW were highest in Bayelsa state (0.2868) and Osun state (0.2652). The OLS results showed that at 5% level of significance, possession of medical waste disposal guidelines, staff trainings on HCW management, traveling hours from the facilities to local headquarters and being located in rural areas significantly influenced indices of

Healthcare waste management practices and safety indicators in Nigeria

Directory of Open Access Journals (Sweden)

Abayomi Samuel Oyekale

2017-09-01

Full Text Available Abstract Background Adequate management of healthcare waste (HCW is a prerequisite for efficient delivery of healthcare services. In Nigeria, there are several constraints militating against proper management of HCW. This is raising some environmental concerns among stakeholders in the health sector. In this study, we analyzed the practices of HCW management and determinants of risky/safe indices of HCW disposal. Methods The study used the 2013/2014 Service Delivery Indicator (SDI data that were collected from 2480 healthcare facilities in Nigeria. Descriptive statistics, Principal Component Analysis (PCA and Ordinary Least Square (OLS regression were used to analyze the data. Results The results showed that 52.20% and 38.21% of the sampled healthcare facilities from Cross River and Bauchi states possessed guidelines for HCW management, respectively. Trainings on management of HCW were attended by 67.18% and 53.19% of the healthcare facilities from Cross River and Imo states, respectively. Also, 32.32% and 29.50% of healthcare facilities from rural and urban areas previously sent some of their staff members for trainings on HCW management, respectively. Sharp and non-sharp HCW were burnt in protected pits in 45.40% and 45.36% of all the sampled healthcare facilities, respectively. Incinerators were reported to be functional in only 2.06% of the total healthcare facilities. In Bauchi and Kebbi states, 23.58% and 21.05% of the healthcare facilities respectively burnt sharp HCW without any protection. Using PCA, computed risky indices for disposal of sharp HCW were highest in Bayelsa state (0.3070 and Kebbi state (0.2172, while indices of risky disposal of non-sharp HCW were highest in Bayelsa state (0.2868 and Osun state (0.2652. The OLS results showed that at 5% level of significance, possession of medical waste disposal guidelines, staff trainings on HCW management, traveling hours from the facilities to local headquarters and being located in

Safety culture improvement. An adaptive management framework

International Nuclear Information System (INIS)

Obadia, Isaac Jose

2005-01-01

After the Chernobyl nuclear accident in 1986, the International Atomic Energy Agency (IAEA) established the safety culture concept as a proactive mean to contribute to safety improvement, starting a worldwide safety culture enhancement program within nuclear organizations mainly focused on nuclear power plants. More recently, the safety culture concept has been extended to non-power applications such as nuclear research reactors and nuclear technological research and development organizations. In 1999, the Nuclear Engineering Institute (IEN), a research and technological development unit of the Brazilian Nuclear Energy Commission (CNEN), started a management change program aiming at improving its performance level of excellence. This change program has been developed assuming the occurrence of complex causal inter-relationships between the organizational culture and the implementation of the management process. A systematic and adaptive management framework comprised of a safety culture improvement practice integrated to a management process based on the Criteria for Excellence of the Brazilian Quality Award Model, has been developed and implemented at IEN. The case study has demonstrated that the developed framework makes possible an effective safety culture improvement and simultaneously facilitates an effective implementation of the management process, thus providing some governance to the change program. (author)

Safety management procedures and practices at Indira Gandhi Centre for Atomic Research

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, P.; Lee, S.M.; Kapoor, R.P.; Raghunath, V.M.; Karthikeyan, S.V. [Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India)]. E-mail: kapoor@igcar.ernet.in

2004-07-01

The Indira Gandhi Centre for Atomic Research (IGCAR) operates FBTR (Fast Breeder Test Reactor), KAMINI (neutron source reactor), radiometallurgical laboratory, radiochemical laboratory, reprocessing plant, industrial scale sodium loops, advanced research laboratories, workshops, etc. Codified safety management procedures with systematic surveillance are essential for safe and reliable operations and these are described under the classifications of radiation safety, industrial safety and reactor operations with special emphasis on the human factor. Health physics teams, independent of the plant facility, supervise the radioactive facilities of the centre. Industrial safety standards are maintained by another independent section. Safety management for the reactors include a clear organisational structure, adequate documentation, compulsory training and licencing, safe working methods taking into account human factors and review by independent safety authorities. (author)

Safety management procedures and practices at Indira Gandhi Centre for Atomic Research

International Nuclear Information System (INIS)

Rodriguez, P.; Lee, S.M.; Kapoor, R.P.; Raghunath, V.M.; Karthikeyan, S.V.

2004-01-01

The Indira Gandhi Centre for Atomic Research (IGCAR) operates FBTR (Fast Breeder Test Reactor), KAMINI (neutron source reactor), radiometallurgical laboratory, radiochemical laboratory, reprocessing plant, industrial scale sodium loops, advanced research laboratories, workshops, etc. Codified safety management procedures with systematic surveillance are essential for safe and reliable operations and these are described under the classifications of radiation safety, industrial safety and reactor operations with special emphasis on the human factor. Health physics teams, independent of the plant facility, supervise the radioactive facilities of the centre. Industrial safety standards are maintained by another independent section. Safety management for the reactors include a clear organisational structure, adequate documentation, compulsory training and licencing, safe working methods taking into account human factors and review by independent safety authorities. (author)

Establishing management information system to solve the information management problem of nuclear safety related personnel's qualification management

International Nuclear Information System (INIS)

Sun Haipeng; Liu Zhijun; Li Tianshu

2013-01-01

With the rapid progress of nuclear energy and nuclear technology utilization, nuclear safety related personnel play an increasingly important role in ensuring nuclear safety. NNSA personnel qualification management information system conducts a multi-faceted, effective, real-time monitoring and information collection for nuclear safety staff practice unit management, knowledge management, license application, appraisal management or supervision, training management or supervision and certified staff management, and also is a milestone for NNSA to build the state department with 'five-feature' (learning-oriented, service-oriented, economical, innovative, clean-type). (authors)

The development of safety cases for healthcare services: Practical experiences, opportunities and challenges

International Nuclear Information System (INIS)

Sujan, Mark; Spurgeon, Peter; Cooke, Matthew; Weale, Andy; Debenham, Philip; Cross, Steve

2015-01-01

There has been growing interest in the concept of safety cases for medical devices and health information technology, but questions remain about how safety cases can be developed and used meaningfully in the safety management of healthcare services and processes. The paper presents two examples of the development and use of safety cases at a service level in healthcare. These first practical experiences at the service level suggest that safety cases might be a useful tool to support service improvement and communication of safety in healthcare. The paper argues that safety cases might be helpful in supporting healthcare organisations with the adoption of proactive and rigorous safety management practices. However, it is also important to consider the different level of maturity of safety management and regulatory oversight in healthcare. Adaptations to the purpose and use of safety cases might be required, complemented by the provision of education to both practitioners and regulators. - Highlights: • Empirical description of safety case development at service level in healthcare. • Safety cases can support adoption of proactive and rigorous safety management. • Adaptation to purpose and use of safety cases might be required in healthcare. • Education should be provided to practitioners and regulators

Self arrangements in occupational safety and health management

International Nuclear Information System (INIS)

Ismail Bahari

2002-01-01

The book is written with the awareness of safe work culture where success does not lie to compliance with the law only. Instead it is more of an excellent management based on the principle of self organization. Self arrangements in the management of occupational safety and health do not rest on the shoulders of the employer or the safety management and safety communities, but are committed together with the leadership of the employer. Self arrangements will be more meaningful and successful if those involved have knowledge about the philosophy and principles of why and how this management is done, and so the method can be practiced and eventually cultivated as a working system. (author)

Forest management practices and the occupational safety and health administration logging standard

Science.gov (United States)

John R. Myers; David Elton Fosbroke

1995-01-01

The Occupational Safety and Health Administration (OSHA) has established safety and health regulations for the logging industry. These new regulations move beyond the prior OSHA pulpwood harvesting standard by including sawtimber harvesting operations. Because logging is a major tool used by forest managers to meet silvicultural goals, managers must be aware of what...

Criticality Risk Management: Why Analysis of Operating Practices Matters

International Nuclear Information System (INIS)

Menuet, L.; Tasset, D.; Hebraud, C.

2016-01-01

The criticality risk is an unwanted neutron chain reaction that could lead, if not under control, to a criticality accident resulting in a high release of energy accompanied by an intense emission of neutron and gamma radiation. Thus, the management of criticality risk in Fuel Cycle Facilities relies mainly on a set of prescriptions and requirements established by the licencees for achieving safety objectives. This paper intends to show that, beyond prescriptions and requirements, a socio-technical approach is essential to define a relevant set of criticality safety rules favouring efficient and safe human activities. Indeed, a thorough knowledge of staff operating practices, beyond contributing significantly to the definition of appropriate technical and organizational provisions, enhances safety management combining “rule-based safety” and “managed safety”. Rule-based safety (top down definition of the rules) can be achieved by anticipating undesirable situations and defining provisions to avoid and manage them in daily practices. On the other hand, managed safety (integration of local characteristics) develops the sociotechnical system capacity to anticipate, recognise and formulate appropriate responses to unexpected scenarios that were not foreseen by the organization, or to rules that are not applicable to the operational realities. Thus, an effective safety management relies on human expertise, on the skills of individuals, on the quality of initiatives, and on the way teams and organizations perform the operations on a daily basis, interact and coordinate to integrate and regulate both ruled-based safety and managed safety.

Safety management of radioisotopes and others in educational institutions

International Nuclear Information System (INIS)

1981-01-01

Radioisotopes are extensively used in the fields of research in various educational institutions. While considerable progress has been seen in the safety management of RI utilization, such accidents as the loss of radioisotopes and radioactive contamination occurred. Under the situation, the safety management of RIs and others in RI-using facilities provided by the law has been examined by the ad hoc committee. A report by the committee is described as follows: need for a RI safety management organization, defining the responsibility of the chief technicians handling radiation, need for the practices of using RIs, etc. in education and traininng, planned RI-handling facilities, cautions for the loss of RIs and the contamination, centralization in RI safety management, improvement of remuneration for the chief technicians handling radiation, occasional restudy on the safety management of RIs, etc. (J.P.N.)

[Karachi Nuclear Power Plant (KANUPP), Safety Management

Energy Technology Data Exchange (ETDEWEB)

Hasan, S M [Karachi Nuclear Power Plant (KANUPP), Karachi (Pakistan)

1997-12-01

The present regime for CANDU safety management in Pakistan has evolved in line with contemporary international practice, and is essential adequate to ensure the continued safety of KANUPP and other future CANDU reactors, as confirmed by international reviews as well. But the small size of Pakistan nuclear power program poses limitations in developing - expert judgment in analysis of in-service inspection data; and own methodology for CANDU safety analysis.

[Karachi Nuclear Power Plant (KANUPP), Safety Management

International Nuclear Information System (INIS)

Hasan, S.M.

1997-01-01

The present regime for CANDU safety management in Pakistan has evolved in line with contemporary international practice, and is essential adequate to ensure the continued safety of KANUPP and other future CANDU reactors, as confirmed by international reviews as well. But the small size of Pakistan nuclear power program poses limitations in developing - expert judgment in analysis of in-service inspection data; and own methodology for CANDU safety analysis

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2010-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

Predisposal Management of Radioactive Waste. General Safety Requirements Pt. 5

International Nuclear Information System (INIS)

2009-01-01

There are a large number of facilities and activities around the world in which radioactive material is produced, handled and stored. This Safety Requirements publication presents international consensus requirements for the management of radioactive waste prior to its disposal. It provides the safety imperatives on the basis of which facilities can be designed, operated and regulated. The publication is supported by a number of Safety Guides that provide up to date recommendations and guidance on best practices for management of particular types of radioactive waste, for storage of radioactive waste, for assuring safety by developing safety cases and supporting safety assessments, and for applying appropriate management systems. Contents: 1. Introduction; 2. Protection of human health and the environment; 3. Responsibilities associated with the predisposal management of radioactive waste; 4. Steps in the predisposal management of radioactive waste; 5. Development and operation of predisposal radioactive waste management facilities and activities; Annex: Predisposal management of radioactive waste and the fundamental safety principles.

workplace safety management as correlates of wellbeing among ...

African Journals Online (AJOL)

User

2017-12-28

Dec 28, 2017 ... ABSTRACT. Significant proportion of Nigerians working in manufacturing firms do not enjoy the desirable level of wellbeing when it comes to safety and health. Safety management practices of industries have implications for employees' wellbeing and productivity. This study investigates relationship ...

Process management - critical safety issues with focus on risk management

International Nuclear Information System (INIS)

Sanne, Johan M.

2005-12-01

Organizational changes focused on process orientation are taking place among Swedish nuclear power plants, aiming at improving the operation. The Swedish Nuclear Power Inspectorate has identified a need for increased knowledge within the area for its regulatory activities. In order to analyze what process orientation imply for nuclear power plant safety a number of questions must be asked: 1. How is safety in nuclear power production created currently? What significance does the functional organization play? 2. How can organizational forms be analysed? What consequences does quality management have for work and for the enterprise? 3. Why should nuclear power plants be process oriented? Who are the customers and what are their customer values? Which customers are expected to contribute from process orientation? 4. What can one learn from process orientation in other safety critical systems? What is the effect on those features that currently create safety? 5. Could customer values increase for one customer without decreasing for other customers? What is the relationship between economic and safety interests from an increased process orientation? The deregulation of the electricity market have caused an interest in increased economic efficiency, which is the motivation for the interest in process orientation. among other means. It is the nuclear power plants' owners and the distributors (often the same corporations) that have the strongest interest in process orientation. If the functional organization and associated practices are decomposed, the prerequisites of the risk management regime changes, perhaps deteriorating its functionality. When nuclear power operators consider the introduction of process orientation, the Nuclear Power Inspectorate should require that 1. The operators perform a risk analysis beforehand concerning the potential consequences that process orientation might convey: the analysis should contain a model specifying how safety is currently

Practical implementation of good practice in health, environment and safety management in enterprise in the Lodz region.

Science.gov (United States)

Michalak, Jacek

2002-10-01

Good practice in health, environment and safety management in enterprise (GP HESME) is the process that aims at continuous improvement in health, environment and safety performance, involving all stakeholders within and outside the enterprise. The GP HESME system is intended to function at different levels: international, national, local community, and enterprise. The most important issues at the first stage of GP HESME implementation in the Lodz region are described. Also, the proposals of future activities in Lodz are presented. Practical implementation of GP HESME requires close co-operation among all stakeholders: local authorities, employers, employees, research institutions, and the state inspectorate. The WHO and the Nofer Institute of Occupational Medicine (NIOM) are initiating implementation, delivering professional consultation, education and training of stakeholders in the NIOM School of Public Health. The implementation of GP HESME in the Lodz region started in 1999 from a WHO meeting on criteria and indicators, followed by close collaboration of NIOM with the city's Department of Public Health. 'Directions of Actions for Health of Lodz Citizens' is now the city's official document that includes GP HESME as an important part of public health policy in Lodz. Several conferences were organized by NIOM together with the Professional Managers' Club, Labor Inspection, and the city's Department of Public Health to assess the most important needs of enterprises. The employers and managerial staff, who predominated among the participants, stated the need for tailored sets of indicators and economic appraisal of GP HESME activities. Special attention is paid to GP HESME in supermarkets and community-owned enterprises, e.g., a local transportation company. A special program for small- and medium-size enterprises will be the next step of GP HESME in the Lodz region. The implementation of GP HESME is possible if the efforts of local authorities; research

Dimensions of patient safety culture in family practice.

Science.gov (United States)

Palacios-Derflingher, Luz; O'Beirne, Maeve; Sterling, Pam; Zwicker, Karen; Harding, Brianne K; Casebeer, Ann

2010-01-01

Safety culture has been shown to affect patient safety in healthcare. While the United States and United Kingdom have studied the dimensions that reflect patient safety culture in family practice settings, to date, this has not been done in Canada. Differences in the healthcare systems between these countries and Canada may affect the dimensions found to be relevant here. Thus, it is important to identify and compare the dimensions from the United States and the United Kingdom in a Canadian context. The objectives of this study were to explore the dimensions of patient safety culture that relate to family practice in Canada and to determine if differences and similarities exist between dimensions found in Canada and those found in previous studies undertaken in the United States and the United Kingdom. A qualitative study was undertaken applying thematic analysis using focus groups with family practice offices and supplementary key stakeholders. Analysis of the data indicated that most of the dimensions from the United States and United Kingdom are appropriate in our Canadian context. Exceptions included owner/managing partner/leadership support for patient safety, job satisfaction and overall perceptions of patient safety and quality. Two unique dimensions were identified in the Canadian context: disclosure and accepting responsibility for errors. Based on this early work, it is important to consider differences in care settings when understanding dimensions of patient safety culture. We suggest that additional research in family practice settings is critical to further understand the influence of context on patient safety culture.

Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers general requirements for the establishment and maintenance of a quality management system for agencies engaged in nondestructive testing (NDT). 1.2 This practice utilizes criteria contained in Practice E 543. 1.3 This practice utilizes criteria contained in American National Standard ANSI/ISO/ASQ Q9001–2000, Quality management systems—Requirements. 1.4 This practice recognizes the importance of establishing minimum safety criteria. 1.5 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard. 1.6 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Implementing process safety management in gas processing operations

International Nuclear Information System (INIS)

Rodman, D.L.

1992-01-01

The Occupational Safety and Health Administration (OSHA) standard entitled Process Safety Management of Highly Hazardous Chemicals; Explosives and Blasting Agents was finalized February 24, 1992. The purpose of the standard is to prevent or minimize consequences of catastrophic releases of toxic, flammable, or explosive chemicals. OSHA believes that its rule will accomplish this goal by requiring a comprehensive management program that integrates technologies, procedures, and management practices. Gas Processors Association (GPA) member companies are significantly impacted by this major standard, the requirements of which are extensive and complex. The purpose of this paper is to review the requirements of the standard and to discuss the elements to consider in developing and implementing a viable long term Process Safety Management Program

Development of a Safety Management Web Tool for Horse Stables.

Science.gov (United States)

Leppälä, Jarkko; Kolstrup, Christina Lunner; Pinzke, Stefan; Rautiainen, Risto; Saastamoinen, Markku; Särkijärvi, Susanna

2015-11-12

Managing a horse stable involves risks, which can have serious consequences for the stable, employees, clients, visitors and horses. Existing industrial or farm production risk management tools are not directly applicable to horse stables and they need to be adapted for use by managers of different types of stables. As a part of the InnoEquine project, an innovative web tool, InnoHorse, was developed to support horse stable managers in business, safety, pasture and manure management. A literature review, empirical horse stable case studies, expert panel workshops and stakeholder interviews were carried out to support the design. The InnoHorse web tool includes a safety section containing a horse stable safety map, stable safety checklists, and examples of good practices in stable safety, horse handling and rescue planning. This new horse stable safety management tool can also help in organizing work processes in horse stables in general.

Nurses' experiences and perspectives on medication safety practices: an explorative qualitative study.

Science.gov (United States)

Smeulers, Marian; Onderwater, Astrid T; van Zwieten, Myra C B; Vermeulen, Hester

2014-04-01

To explore nurses' experiences with and perspectives on preventing medication administration errors. Insight into nurses' experiences with and perspectives on preventing medication administration errors is important and can be utilised to tailor and implement safety practices. A qualitative interview study of 20 nurses in an academic medical centre was conducted between March and December of 2011. Three themes emerged from this study: (1) nurses' roles and responsibilities in medication safety: aside from safe preparation and administration, the clinical reasoning of nurses is essential for medication safety; (2) nurses' ability to work safely: knowledge of risks and nurses' work circumstances influence their ability to work safely; and (3) nurses' acceptance of safety practices: advantages, feasibility and appropriateness are important incentives for acceptance of a safety practice. Nurses' experiences coincide with the assumption that they are in a pre-eminent position to enable safe medication management; however, their ability to adequately perform this role depends on sufficient knowledge to assess the risks of medication administration and on the circumstances in which they work. Safe medication management requires a learning climate and professional practice environment that enables further development of professional nursing skills and knowledge. © 2014 John Wiley & Sons Ltd.

Information systems in food safety management.

Science.gov (United States)

McMeekin, T A; Baranyi, J; Bowman, J; Dalgaard, P; Kirk, M; Ross, T; Schmid, S; Zwietering, M H

2006-12-01

Information systems are concerned with data capture, storage, analysis and retrieval. In the context of food safety management they are vital to assist decision making in a short time frame, potentially allowing decisions to be made and practices to be actioned in real time. Databases with information on microorganisms pertinent to the identification of foodborne pathogens, response of microbial populations to the environment and characteristics of foods and processing conditions are the cornerstone of food safety management systems. Such databases find application in: Identifying pathogens in food at the genus or species level using applied systematics in automated ways. Identifying pathogens below the species level by molecular subtyping, an approach successfully applied in epidemiological investigations of foodborne disease and the basis for national surveillance programs. Predictive modelling software, such as the Pathogen Modeling Program and Growth Predictor (that took over the main functions of Food Micromodel) the raw data of which were combined as the genesis of an international web based searchable database (ComBase). Expert systems combining databases on microbial characteristics, food composition and processing information with the resulting "pattern match" indicating problems that may arise from changes in product formulation or processing conditions. Computer software packages to aid the practical application of HACCP and risk assessment and decision trees to bring logical sequences to establishing and modifying food safety management practices. In addition there are many other uses of information systems that benefit food safety more globally, including: Rapid dissemination of information on foodborne disease outbreaks via websites or list servers carrying commentary from many sources, including the press and interest groups, on the reasons for and consequences of foodborne disease incidents. Active surveillance networks allowing rapid dissemination

Management of occupational health risks in small-animal veterinary practices.

Science.gov (United States)

D'Souza, Eva; Barraclough, Richard; Fishwick, David; Curran, Andrew

2009-08-01

Small-animal work is a major element of veterinary practice in the UK and may be hazardous, with high levels of work-related injuries and ill-health reported in Australia and USA. There are no studies addressing the management of occupational health risks arising from small-animal work in the UK. To investigate the sources of health and safety information used and how health and safety and 12 specific occupational health risks are managed by practices. A cross-sectional postal survey of all small-animal veterinary practices in Hampshire. A response was mandatory as this was a Health & Safety Executive (HSE) inspection activity. A total of 118 (100%) practices responded of which 93 were eligible for inclusion. Of these, 99 and 86%, respectively, were aware of the Royal College of Veterinary Surgeons (RCVS) practice standards and had British Small Animal Veterinary Association (BSAVA) staff members, while only 51% had previous contact with HSE (publications, advice and visit). Ninety per cent had health and safety policies, but only 31% had trained responsible staff in health and safety. Specific health hazards such as occupational allergens and computer use were relatively overlooked both by practices and the RCVS/BSAVA guidance available in 2002. Failings in active health risk management systems could be due to a lack of training to ensure competence in those with responsibilities. Practices rely on guidance produced by their professional bodies. Current RCVS guidance, available since 2005, has remedied some previous omissions, but further improvements are recommended.

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Evaluation of safety practices and performance in a brewery industry in Nigeria between 2000 – 2007. ... Journal of Applied Sciences and Environmental Management ... The study revealed that a total of 156 accidents were prevented in the period of the safety programme which translates to an average of 19.45 per year.

Key practical issues in strengthening safety culture. INSAG-15. A report by the International Safety Advisory Group

International Nuclear Information System (INIS)

2002-01-01

This report describes the essential practical issues to be considered by organizations aiming to strengthen safety culture. It is intended for senior executives, managers and first line supervisors in operating organizations. Although safety culture cannot be directly regulated, it is important that members of regulatory bodies understand how their actions affect the development of attempts to strengthen safety culture and are sympathetic to the need to improve the less formal human related aspects of safety. The report is therefore of relevance to regulators, although not intended primarily for them. The International Nuclear Safety Advisory Group (INSAG) introduced the concept of safety culture in its INSAG-4 report in 1991. Since then, many papers have been written on safety culture, as it relates to organizations and individuals, its improvement and its underpinning prerequisites. Variations in national cultures mean that what constitutes a good approach to enhancing safety culture in one country may not be the best approach in another. However, INSAG seeks to provide pragmatic and practical advice of wide applicability in the principles and issues presented in this report. Nuclear and radiological safety are the prime concerns of this report, but the topics discussed are so general that successful application of the principles should lead to improvements in other important areas, such as industrial safety, environmental performance and, in some respects, wider business performance. This is because many of the attitudes and practices necessary to achieve good performance in nuclear safety, including visible commitment by management, openness, care and thoroughness in completing tasks, good communication and clarity in recognizing major issues and dealing with them as a priority, have wide applicability

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

Energy Technology Data Exchange (ETDEWEB)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla (Risk Analysis, Social and Decision Research Unit, Dept. of Psychology, Stockholm Univ., Stockholm (Sweden))

2004-11-15

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

Inter-comparison of safety culture within selected practices in Ghana utilising ionising radiation

International Nuclear Information System (INIS)

Faanu, A.; Schandorf, C.; Darko, E. O.; Boadu, M.; Emi-Reynolds, G.; Awudu, A. R.; Gyekye, P. K.; Kpeglo, D. O.

2010-01-01

The safety culture of selected practices and facilities in Ghana utilising radiation sources or radiation emitting devices has been assessed using a performance indicator, which provided status information on management and operating staff commitment to safety. The questionnaire was based on the following broad areas: general safety considerations, safety policy at the facility level, safety practices at the facility level, definition of responsibility, staff training, safety of the physical structure of the facility and the emergency plans. The analysis showed that the percentage levels of commitment to safety for the respective practices are as follows: conventional radiography, 23.3-90.0%; research reactor, 73.3 %; gamma irradiation facility, 53.3%; radiotherapy, 76.7%; X-ray scanner, 80.0%; gamma scanner, 76.7%; industrial radiography 86.7% and nuclear density practice, 78%. None of the practices or facilities was able to satisfy all the requirements that will ensure a 100% level of safety culture. (authors)

Customer Relationship Management System in Occupational Safety & Health Companies: Research on Practice and Preliminary Design Solution

Directory of Open Access Journals (Sweden)

Robert Fabac

2011-10-01

Full Text Available One of the most prominent contemporary trends in formation of companies is the approach to development of a customer-oriented company. In this matter, various versions related to the intensity of this orientation are differentiated. Customer relationship management (CRM system is a well-known concept, and its practice is being studied and improved in connection to various sectors. Companies providing services of occupational safety and health (OHS mainly cooperate with a large number of customers and the quality of this cooperation largely affects the occupational safety and health of employees. Therefore, it is of both scientific and wider social interest to study and improve the relationship of these companies with their customers. This paper investigates the practice of applying CRM in Croatian OHS companies. It identifies the existing conditions and suggests possible improvements in the practice of CRM, based on experts’ assessments using analytic hierarchy process evaluation. Universal preliminary design was created as a framework concept for the formation of a typical customer-oriented OHS services company. Preliminary design includes a structural view, which provides more details through system diagrams, and an illustration of main cooperation processes of a company with its customer.

On Safety Management. A Frame of Reference for Studies of Safety Management with Examples From Non-Nuclear Contexts of Relevance for Nuclear Safety

International Nuclear Information System (INIS)

Svensson, Ola; Salo, Ilkka; Allwin, Pernilla

2004-11-01

A good knowledge about safety management from risk technologies outside the area of nuclear power may contribute to both broaden the perspectives on safety management in general, and point at new opportunities for improving safety measures within the nuclear industry. First, a theoretical framework for the study of safety management in general is presented, followed by three case studies on safety management from different non-nuclear areas with potential relevance for nuclear safety. The chapters are written as separate reports and can be read independently of each other. The nuclear industry has a long experience about the management of risky activities, involving all the stages from planing to implementation, both on a more generalized level and in the specific branches of activities (management, administration, operation, maintenance, etc.). Here, safety management is a key concept related to these areas of activities. Outside the field of nuclear power there exist a number of different non-nuclear risk technologies, each one with their own specific needs and experiences about safety management. The differences between the areas consist partly of the different experiences caused by the different technologies. Besides using own experiences in safety practices within the own areas of activities, it may be profitable to take advantage in knowledge and experiences from one area and put it in practice in another area. In order to facilitate knowledge transfer from one technological area to another it may be possible to adapt a common theoretical model, for descriptions and explanations, to the different technologies. Such a model should admit that common denominators for safety management across the areas might be identified and described with common concepts. Systems theory gives the opportunity to not only create models that are descriptive for events within the limits of a given technology, but also to generate knowledge that can be transferred to other

Administrative practices for nuclear criticality safety, ANSI/ANS-8.19-1996

International Nuclear Information System (INIS)

Smith, D.R.

1996-01-01

American National Standard, open-quotes Administrative Practices for Nuclear Criticality Safety,close quotes American National Standards Institute/American Nuclear Society (ANSI/ANS)-8.19-1996, addresses the responsibilities of management, supervision, and the criticality safety staff in the administration of an effective criticality safety program. Characteristics of operating procedures, process evaluations, material control procedures, and emergency plans are discussed

Ageing Management for Research Reactors. Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-10-15

good practice. This Safety Guide is intended for use by operating organizations in establishing, implementing and improving ageing management programmes for research reactors. It may be used by regulatory bodies in verifying that ageing of research reactors is being effectively managed. While the intention is not to recommend ways in which to make the operation of a research reactor more effective or more efficient, the recommendations provided in this Safety Guide on managing ageing of SSCs to ensure safety will undoubtedly contribute to the enhancement of their long term reliability and availability. SCOPE. This Safety Guide covers all aspects relating to the establishment, implementation and continuous improvement of an ageing management programme. It not only focuses on managing the physical ageing of SSCs important to safety but also provides guidance on safety aspects of managing obsolescence (non-physical ageing)

Ageing Management for Research Reactors. Specific Safety Guide

International Nuclear Information System (INIS)

2010-01-01

good practice. This Safety Guide is intended for use by operating organizations in establishing, implementing and improving ageing management programmes for research reactors. It may be used by regulatory bodies in verifying that ageing of research reactors is being effectively managed. While the intention is not to recommend ways in which to make the operation of a research reactor more effective or more efficient, the recommendations provided in this Safety Guide on managing ageing of SSCs to ensure safety will undoubtedly contribute to the enhancement of their long term reliability and availability. SCOPE. This Safety Guide covers all aspects relating to the establishment, implementation and continuous improvement of an ageing management programme. It not only focuses on managing the physical ageing of SSCs important to safety but also provides guidance on safety aspects of managing obsolescence (non-physical ageing)

Integrated therapy safety management system.

Science.gov (United States)

Podtschaske, Beatrice; Fuchs, Daniela; Friesdorf, Wolfgang

2013-09-01

The aim is to demonstrate the benefit of the medico-ergonomic approach for the redesign of clinical work systems. Based on the six layer model, a concept for an 'integrated therapy safety management' is drafted. This concept could serve as a basis to improve resilience. The concept is developed through a concept-based approach. The state of the art of safety and complexity research in human factors and ergonomics forms the basis. The findings are synthesized to a concept for 'integrated therapy safety management'. The concept is applied by way of example for the 'medication process' to demonstrate its practical implementation. The 'integrated therapy safety management' is drafted in accordance with the six layer model. This model supports a detailed description of specific work tasks, the corresponding responsibilities and related workflows at different layers by using the concept of 'bridge managers'. 'Bridge managers' anticipate potential errors and monitor the controlled system continuously. If disruptions or disturbances occur, they respond with corrective actions which ensure that no harm results and they initiate preventive measures for future procedures. The concept demonstrates that in a complex work system, the human factor is the key element and final authority to cope with the residual complexity. The expertise of the 'bridge managers' and the recursive hierarchical structure results in highly adaptive clinical work systems and increases their resilience. The medico-ergonomic approach is a highly promising way of coping with two complexities. It offers a systematic framework for comprehensive analyses of clinical work systems and promotes interdisciplinary collaboration. © 2013 The Authors. British Journal of Clinical Pharmacology © 2013 The British Pharmacological Society.

Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

International Nuclear Information System (INIS)

Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

2016-01-01

The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

Knowledge, perception and practice of injection safety and ...

African Journals Online (AJOL)

Knowledge, perception and practice of injection safety and healthcare waste management among teaching hospital staff in south east Nigeria: an intervention study. ... Following the intervention, a significantly high number became aware of post-exposure prophylaxis and color coded bins and liners. Conclusion: There is a ...

Enhancing NPP Safety Through an Effective Dependability Management

Energy Technology Data Exchange (ETDEWEB)

Vieru, G., E-mail: g_vieru@yahoo.com [AREN, Bucharest (Romania)

2014-10-15

Taking into account the importance of the continuous improvement of the performance and reliability of a NPP and practical measures to strengthen nuclear safety and security, it is to be noted that a good management for a nuclear power reactor involves a ''good dependability management'' of the activities, such as: Reliability, Availability, Maintainability (RAM) and maintenance support. In order to evaluate certain safety assessment criteria intended to be applied at the level of the nuclear reactor unit management, equipment dependability indicators and their impact over the availability and reactor safety have to be evaluated. Reactor equipment dependability indicators provide a quantitative indication of equipment RAM performances (Reliability, Availability and Maintenance). One of the important benefits of maintenance and failure data gathering is that it can be used as a support of probabilistic safety assessment (PSA). Also, a good dependability management implementation may be used to complement reactor level unit performance indicators in the field of safe operation, maintenance and improving operating parameters, as well as for Strengthening Safety and Improving Reliability of a NPP. This paper underlines the importance of nuclear safety and security as prerequisites for nuclear power. In addition, it demonstrates how different technical aspects, through implementation of a good dependability management, contribute to a strengthened safety and an improvement of availability of the NPP through dependability indicators determination and evaluation. (author)

Scale development of safety management system evaluation for the airline industry.

Science.gov (United States)

Chen, Ching-Fu; Chen, Shu-Chuan

2012-07-01

The airline industry relies on the implementation of Safety Management System (SMS) to integrate safety policies and augment safety performance at both organizational and individual levels. Although there are various degrees of SMS implementation in practice, a comprehensive scale measuring the essential dimensions of SMS is still lacking. This paper thus aims to develop an SMS measurement scale from the perspective of aviation experts and airline managers to evaluate the performance of company's safety management system, by adopting Schwab's (1980) three-stage scale development procedure. The results reveal a five-factor structure consisting of 23 items. The five factors include documentation and commands, safety promotion and training, executive management commitment, emergency preparedness and response plan and safety management policy. The implications of this SMS evaluation scale for practitioners and future research are discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Health and safety management practices of contractors in South East Asia: A multi country study of Cambodia, Vietnam, and Malaysia

OpenAIRE

Manu, P.; Mahamadu, A.-M. ed; Phung, V. M.; Nguyen, T. T.; Ath, C.; Heng, A. Y. T.; Kit, S. C.

2017-01-01

The construction sector is notorious for accounting for numerous occupational deaths, injuries and illnesses in many countries. In emerging economies this situation could be direr, and health and safety (H&S) management by contractors is important to tackling this. This study investigated the H&S management practices of contractors in three South East Asian countries (Malaysia, Vietnam, and Cambodia) with the view to highlighting implementation issues. A questionnaire instrument containing 40...

Leadership and Management for Safety. General Safety Requirements

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factor, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations (registrants and licensees) and other organizations concerned with facilities and activities that give rise to radiation risks

Effects of a team-based assessment and intervention on patient safety culture in general practice

DEFF Research Database (Denmark)

Hoffmann, B; Müller, V; Rochon, J

2014-01-01

Background: The measurement of safety culture in healthcare is generally regarded as a first step towards improvement. Based on a self-assessment of safety culture, the Frankfurt Patient Safety Matrix (FraTrix) aims to enable healthcare teams to improve safety culture in their organisations....... In this study we assessed the effects of FraTrix on safety culture in general practice. Methods: We conducted an open randomised controlled trial in 60 general practices. FraTrix was applied over a period of 9 months during three facilitated team sessions in intervention practices. At baseline and after 12...... months, scores were allocated for safety culture as expressed in practice structure and processes (indicators), in safety climate and in patient safety incident reporting. The primary outcome was the indicator error management. Results: During the team sessions, practice teams reflected on their safety...

Practice Hospital Bed Safety

Science.gov (United States)

... Home For Consumers Consumer Updates Practice Hospital Bed Safety Share Tweet Linkedin Pin it More sharing options ... It depends on the complexity of the bed." Safety Tips CDRH offers the following safety tips for ...

Quality management, a directive approach to patient safety.

Science.gov (United States)

Ayuso-Murillo, Diego; de Andrés-Gimeno, Begoña; Noriega-Matanza, Concha; López-Suárez, Rafael Jesús; Herrera-Peco, Ivan

Nowadays the implementation of effective quality management systems and external evaluation in healthcare is a necessity to ensure not only transparency in activities related to health but also access to health and patient safety. The key to correctly implementing a quality management system is support from the managers of health facilities, since it is managers who design and communicate to health professionals the strategies of action involved in quality management systems. This article focuses on nursing managers' approach to quality management through the implementation of cycles of continuous improvement, participation of improvement groups, monitoring systems and external evaluation quality models (EFQM, ISO). The implementation of a quality management system will enable preventable adverse effects to be minimized or eliminated, and promote patient safety and safe practice by health professionals. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

The ConCom Safety Management Scale: developing and testing a measurement instrument for control-based and commitment-based safety management approaches in hospitals.

Science.gov (United States)

Alingh, Carien W; Strating, Mathilde M H; van Wijngaarden, Jeroen D H; Paauwe, Jaap; Huijsman, Robbert

2018-03-06

Nursing management is considered important for patient safety. Prior research has predominantly focused on charismatic leadership styles, although it is questionable whether these best characterise the role of nurse managers. Managerial control is also relevant. Therefore, we aimed to develop and test a measurement instrument for control-based and commitment-based safety management of nurse managers in clinical hospital departments. A cross-sectional survey design was used to test the newly developed questionnaire in a sample of 2378 nurses working in clinical departments. The nurses were asked about their perceptions of the leadership behaviour and management practices of their direct supervisors. Psychometric properties were evaluated using confirmatory factor analysis and reliability estimates. The final 33-item questionnaire showed acceptable goodness-of-fit indices and internal consistency (Cronbach's α of the subscales range: 0.59-0.90). The factor structure revealed three subdimensions for control-based safety management: (1) stressing the importance of safety rules and regulations; (2) monitoring compliance; and (3) providing employees with feedback. Commitment-based management consisted of four subdimensions: (1) showing role modelling behaviour; (2) creating safety awareness; (3) showing safety commitment; and (4) encouraging participation. Construct validity of the scale was supported by high factor loadings and provided preliminary evidence that control-based and commitment-based safety management are two distinct yet related constructs. The findings were reconfirmed in a cross-validation procedure. The results provide initial support for the construct validity and reliability of our ConCom Safety Management Scale. Both management approaches were found to be relevant for managing patient safety in clinical hospital departments. The scale can be used to deepen our understanding of the influence of patient safety management on healthcare professionals

Advanced Test Reactor Safety Basis Upgrade Lessons Learned Relative to Design Basis Verification and Safety Basis Management

International Nuclear Information System (INIS)

G. L. Sharp; R. T. McCracken

2004-01-01

The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The reactor also provides other irradiation services such as radioisotope production. The ATR and its support facilities are located at the Test Reactor Area of the Idaho National Engineering and Environmental Laboratory (INEEL). An audit conducted by the Department of Energy's Office of Independent Oversight and Performance Assurance (DOE OA) raised concerns that design conditions at the ATR were not adequately analyzed in the safety analysis and that legacy design basis management practices had the potential to further impact safe operation of the facility.1 The concerns identified by the audit team, and issues raised during additional reviews performed by ATR safety analysts, were evaluated through the unreviewed safety question process resulting in shutdown of the ATR for more than three months while these concerns were resolved. Past management of the ATR safety basis, relative to facility design basis management and change control, led to concerns that discrepancies in the safety basis may have developed. Although not required by DOE orders or regulations, not performing design basis verification in conjunction with development of the 10 CFR 830 Subpart B upgraded safety basis allowed these potential weaknesses to be carried forward. Configuration management and a clear definition of the existing facility design basis have a direct relation to developing and maintaining a high quality safety basis which properly identifies and mitigates all hazards and postulated accident conditions. These relations and the impact of past safety basis management practices have been reviewed in order to identify lessons learned from the safety basis upgrade process and appropriate actions to resolve possible concerns with respect to the current ATR safety

Safety Climate, Perceived Risk, and Involvement in Safety Management

OpenAIRE

Kouabenan , Dongo Rémi; Ngueutsa , Robert ,; Safiétou , Mbaye

2015-01-01

International audience; This article examines the relationship between safety climate, risk perception and involvement in safety management by first-line managers (FLM). Sixty-three FLMs from two French nuclear plants answered a questionnaire measuring perceived workplace safety climate, perceived risk, and involvement in safety management. We hypothesized that a positive perception of safety climate would promote substantial involvement in safety management, and that this effect would be str...

Managing for safety and safety culture within the UK nuclear industry. A regulator's perspective

International Nuclear Information System (INIS)

Tyrer, M.J.

2002-01-01

This paper outlines the basis of the legal system for the regulation of health and safety at work within the United Kingdom (UK), and in particular, the regulation of the nuclear industry. The framework, formulated by the regulator, which has been published as a practical guide for directors, managers, health and safety professionals and employee representatives for the successful management of health and safety is explained. This guidance, however, concentrates, to a large extent, on management systems and only addresses in part the types of issues, such as behaviours, values, attitudes and beliefs which contribute to the safety culture of an organization. The regulator of the UK nuclear industry has considered research, and other work, carried out by several organizations in this area, notably the Advisory Committee on the Safety of Nuclear Installations (ACSNI) and the International Atomic Energy Agency (IAEA), and produced its own framework for managing for safety at nuclear installations. As a regulator, the Health and Safety Executive (HSE), and its inspectorate responsible for regulation of the nuclear industry, HM Nuclear Installations Inspectorate (HMNII), are not the appropriate organization to assess the safety culture of an organization, but positively encourage organizations to both carry out this assessment themselves and to monitor their performance. To this end, HSE has developed, and made available, the Health and Safety Climate Tool which is aimed at providing organizations with information which can be used as part of a continuous improvement process. (author)

Practical applications approach to design, development and implementation of an integrated management system

International Nuclear Information System (INIS)

Holdsworth, Rodger

2003-01-01

The introduction of quality, risk, safety, health and environmental management philosophies has significantly changed industry's view of company organization and controlling processes. Quality, risk, safety, health and environmental programs and systems, such as ISO 9000, ISO 14000, process safety, and risk management are impacting the way industry will meet the challenges of safety and environmental risks and the needs of the customer in the future. A wealth of knowledge has been extracted from practical application case studies, which would otherwise be unobtainable without years of experience related to management systems design, development, implementation and control. This paper discusses a practical applications approach to design, develop and implement an integrated management system encompassing quality (ISO 9000), process safety management (CFR 29 1910.119), risk management programs (CFR 40 part 68), environmental management (ISO 14000), and safety and health. This paper includes a discussion of management systems integration and an overview of management systems standards that apply to the petrochemical and chemical manufacturers industries. The paper also provides an overview on integrating management systems, including issues related to the following topics: - Establishing a management system team and objectives. - Assessing and knowing your organization. - Designing the management system to meet site objectives. - Developing system documentation. - Implementing effective management systems. - Measuring program performance. - Continuous improvement

Key practical issues in strengthening safety culture. INSAG-15. A report by the International Safety Advisory Group [Russian Edition

International Nuclear Information System (INIS)

2015-01-01

This report describes the essential practical issues to be considered by organizations aiming to strengthen safety culture. It is intended for senior executives, managers and first line supervisors in operating organizations. Although safety culture cannot be directly regulated, it is important that members of regulatory bodies understand how their actions affect the development of attempts to strengthen safety culture and are sympathetic to the need to improve the less formal human related aspects of safety. The report is therefore of relevance to regulators, although not intended primarily for them. The International Nuclear Safety Advisory Group (INSAG) introduced the concept of safety culture in its INSAG-4 report in 1991. Since then, many papers have been written on safety culture, as it relates to organizations and individuals, its improvement and its underpinning prerequisites. Variations in national cultures mean that what constitutes a good approach to enhancing safety culture in one country may not be the best approach in another. However, INSAG seeks to provide pragmatic and practical advice of wide applicability in the principles and issues presented in this report. Nuclear and radiological safety are the prime concerns of this report, but the topics discussed are so general that successful application of the principles should lead to improvements in other important areas, such as industrial safety, environmental performance and, in some respects, wider business performance. This is because many of the attitudes and practices necessary to achieve good performance in nuclear safety, including visible commitment by management, openness, care and thoroughness in completing tasks, good communication and clarity in recognizing major issues and dealing with them as a priority, have wide applicability

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Directory of Open Access Journals (Sweden)

Jiangshi Zhang

2016-11-01

Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

Food Safety and Sanitary Practices of Selected Hotels in Batangas Province, Philippines: Basis of Proposed Enhancement Measures

Directory of Open Access Journals (Sweden)

April M. Perez

2017-02-01

Full Text Available This study assessed the extent of food safety and sanitary practices of selected hotels in Batangas province as basis of proposed enhancement measures. The study utilized descriptive method to describe food safety and sanitary practices of selected hotels in Batangas province with a total of 8 hotels (256 respondents. Purposive sampling was used in the study. The questionnaires were designed using the provision of the Sanitation Code of the Philippines, validated and finalized to come up with legitimate results. The study showed that there were eight (8 hotel respondents classified as two, three, four star with considerable years of experience and adequate number of employees. The hotels demonstrated the food safety and sanitary practices always in the areas of restaurant, bar service, catering and banquet and room service. The significant pair-wise comparison for restaurant, bar service, catering and banquet and room service shows that 2 star hotels greatly differs. The researcher recommends that the management should maintain high standard of food safety and sanitary practices among its staff, upgrade the food safety and sanitary practices for food safety accreditation, continuous training of the hotel managers/employees on food safety and sanitary practices.

Management of safety, safety culture and self assessment

International Nuclear Information System (INIS)

Carnino, A.

2000-01-01

Safety management is the term used for the measures required to ensure that an acceptable level of safety is maintained throughout the life of an installation, including decommissioning. The safety culture concept and its implementation are described in part one of the paper. The principles of safety are now quite well known and are implemented worldwide. It leads to a situation where harmonization is being achieved as indicated by the entry into force of the Convention on Nuclear Safety. To go beyond the present nuclear safety levels, management of safety and safety culture will be the means for achieving progress. Recent events which took place in major nuclear power countries have shown the importance of the management and the consequences on safety. At the same time, electricity deregulation is coming and will impact on safety through reductions in staffing and in operation and maintenance cost at nuclear installations. Management of safety as well as its control and monitoring by the safety authorities become a key to the future of nuclear energy.(author)

A comparative analysis of occupational health and safety risk prevention practices in Sweden and Spain.

Science.gov (United States)

Morillas, Rosa María; Rubio-Romero, Juan Carlos; Fuertes, Alba

2013-12-01

Scandinavian countries such as Sweden implemented the occupational health and safety (OHS) measures in the European Directive 89/391/EEC earlier than other European counties, including Spain. In fact, statistics on workplace accident rates reveal that between 2004 and 2009, there were considerably fewer accidents in Sweden than in Spain. The objective of the research described in this paper was to reduce workplace accidents and to improve OHS management in Spain by exploring the OHS practices in Sweden. For this purpose, an exploratory comparative study was conducted, which focused on the effectiveness of the EU directive in both countries. The study included a cross-sectional analysis of workplace accident rates and other contextual indicators in both national contexts. A case study of 14 Swedish and Spanish companies identified 14 differences in the preventive practices implemented. These differences were then assessed with a Delphi study to evaluate their contribution to the reduction of workplace accidents and their potential for improving health and safety management in Spain. The results showed that there was agreement concerning 12 of the 14 practices. Finally, we discuss opportunities of improvement in Spanish companies so that they can make their risk management practices more effective. The findings of this comparative study on the implementation of the European Directive 89/391/EEC in both Sweden and Spain have revealed health and safety managerial practices which, if properly implemented, could contribute to improved work conditions and accident statistics of Spanish companies. In particular, the results suggest that Spanish employers, safety managers, external prevention services, safety deputies and Labour Inspectorates should consider implementing streamlined internal preventive management, promoting the integration of prevention responsibilities to the chain of command, and preventing health and safety management from becoming a mere exchange of

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan

Directory of Open Access Journals (Sweden)

Wen-Hwa Ko

2015-12-01

Full Text Available The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry.

Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

Energy Technology Data Exchange (ETDEWEB)

MITCHELL, R.L.

2000-01-10

The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels.

Integrated Environment and Safety and Health Management System (ISMS) Implementation Project Plan

International Nuclear Information System (INIS)

MITCHELL, R.L.

2000-01-01

The Integrated Environment, Safety and Health Management System (ISMS) Implementation Project Plan serves as the project document to guide the Fluor Hanford, Inc (FHI) and Major Subcontractor (MSC) participants through the steps necessary to complete the integration of environment, safety, and health into management and work practices at all levels

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

Management of safety culture

International Nuclear Information System (INIS)

Kavsek, D.

2004-01-01

The strengthening of safety culture in an organization has become an increasingly important issue for nuclear industry. A high level of safety performance is essential for business success in intensely competitive global environment. This presentation offers a discussion of some principles and activities used in enhancing safety performance and appropriate safety behaviour at the Krsko NPP. Over the years a number of events have occurred in nuclear industry that have involved problems in human performance. A review of these and other significant events has identified recurring weaknesses in plant safety culture and policy. Focusing attention on the strengthening of relevant processes can help plants avoid similar undesirable events. The policy of the Krsko NPP is that all employees concerned shall constantly be alert to opportunities to reduce risks to the lowest practicable level and to achieve excellence in plant safety. The most important objective is to protect individuals, society and the environment by establishing and maintaining an effective defense against radiological hazard in the nuclear power plant. It is achieved through the use of reliable structures, components, systems, and procedures, as well as plant personnel committed to a strong safety culture. The elements of safety culture include both organizational and individual aspects. Elements commonly included at the organizational level are senior management commitment to safety, organizational effectiveness, effective communication, organizational learning, and a culture that encourages identification and resolution of safety issues. Elements identified at the individual level include personal accountability, a questioning attitude, communication, procedural adherence, etc.(author)

Safety outcomes for engineering asset management organizations: Old problem with new solutions?

International Nuclear Information System (INIS)

Novak, Jeremy; Farr-Wharton, Ben; Brunetto, Yvonne; Shacklock, Kate; Brown, Kerry

2017-01-01

The issue of safety and longevity of engineering assets is of increasing importance because of their impact when disasters happen. This paper addresses a literature gap by examining the role of workplace relationships in employees' safety behaviour, and builds on the Resilience Engineering (RE) framework by examining some organisational culture factors affecting how employees behave. A Social Exchange framework is used to examine the impact of supervisor-employee relationships, employee commitment to safety practices, and the type of maintenance culture upon employees’ commitment to safety and safety outcomes. Survey data from 284 technical and engineering employees in engineering asset management organisations within Australia were analyzed using Structural Equation Modelling (SEM). Effective employee relationships with management and a proactive maintenance culture were associated with employee commitment to safety culture and safety outcomes. The findings provide empirical support for embedding an effective organisational culture focused on a proactive maintenance approach, along with ensuring employees are committed to safety processes, to ensure safety outcomes and also asset longevity. One study contribution is that good safety outcomes do not develop in a vacuum; instead they are built on effective workplace relationships. Therefore, SET helps to explain the forming of effective safety culture. - Highlights: • Effective workplace relationships with management positively affect organisational safety outcomes. • Supported maintenance cultures positively affect organisational safety outcomes. • Asset longevity requires strong focus on maintenance and safety embedded in the work cultures and everyday practices of employees.

A study for safety and health management problem of semiconductor industry in Taiwan.

Science.gov (United States)

Chao, Chin-Jung; Wang, Hui-Ming; Feng, Wen-Yang; Tseng, Feng-Yi

2008-12-01

The main purpose of this study is to discuss and explore the safety and health management in semiconductor industry. The researcher practically investigates and interviews the input, process and output of the safety and health management of semiconductor industry by using the questionnaires and the interview method which is developed according to the framework of the OHSAS 18001. The result shows that there are six important factors for the safety and health management in Taiwan semiconductor industry. 1. The company should make employee clearly understand the safety and health laws and standards. 2. The company should make the safety and health management policy known to the public. 3. The company should put emphasis on the pursuance of the safety and health management laws. 4. The company should prevent the accidents. 5. The safety and health message should be communicated sufficiently. 6. The company should consider safety and health norm completely.

Safety reloaded: lean operations and high involvement work practices for sustainable workplaces

OpenAIRE

Camuffo, Arnaldo; De Stefano, Federica; Paolino, Chiara

2017-01-01

Starting from the recent quest to investigate the human side of organizational sustainability, this study applies a variety of regression analyses to investigate the effects of Lean Operations, High Involvement Work Practices, and management behaviors on occupational safety. It tests and finds support for the hypotheses that Lean Production systems, High Involvement Work Practices, and two specific management behaviors—workers’ capability development (coaching and teaching of workers) and emp...

FLUOR HANFORD SAFETY MANAGEMENT PROGRAMS

Energy Technology Data Exchange (ETDEWEB)

GARVIN, L. J.; JENSEN, M. A.

2004-04-13

This document summarizes safety management programs used within the scope of the ''Project Hanford Management Contract''. The document has been developed to meet the format and content requirements of DOE-STD-3009-94, ''Preparation Guide for US. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses''. This document provides summary descriptions of Fluor Hanford safety management programs, which Fluor Hanford nuclear facilities may reference and incorporate into their safety basis when producing facility- or activity-specific documented safety analyses (DSA). Facility- or activity-specific DSAs will identify any variances to the safety management programs described in this document and any specific attributes of these safety management programs that are important for controlling potentially hazardous conditions. In addition, facility- or activity-specific DSAs may identify unique additions to the safety management programs that are needed to control potentially hazardous conditions.

Food suppliers' perceptions and practical implementation of food safety regulations in Taiwan.

Science.gov (United States)

Ko, Wen-Hwa

2015-12-01

The relationships between the perceptions and practical implementation of food safety regulations by food suppliers in Taiwan were evaluated. A questionnaire survey was used to identify individuals who were full-time employees of the food supply industry with at least 3 months of experience. Dimensions of perceptions of food safety regulations were classified using the constructs of attitude of employees and corporate concern attitude for food safety regulation. The behavior dimension was classified into employee behavior and corporate practice. Food suppliers with training in food safety were significantly better than those without training with respect to the constructs of perception dimension of employee attitude, and the constructs of employee behavior and corporate practice associated with the behavior dimension. Older employees were superior in perception and practice. Employee attitude, employee behavior, and corporate practice were significantly correlated with each other. Satisfaction with governmental management was not significantly related to corporate practice. The corporate implementation of food safety regulations by suppliers was affected by employees' attitudes and behaviors. Furthermore, employees' attitudes and behaviors explain 35.3% of corporate practice. Employee behavior mediates employees' attitudes and corporate practices. The results of this study may serve as a reference for governmental supervision and provide training guidelines for workers in the food supply industry. Copyright © 2015. Published by Elsevier B.V.

Survey and analysis of radiation safety management systems at medical institutions. Initial report. Radiation protection supervisor, radiation safety organization, and education and training

International Nuclear Information System (INIS)

Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

2005-01-01

In this study, a questionnaire survey was carried out to determine the actual situation of radiation safety management systems in Japanese medical institutions with nuclear medicine facilities. The questionnaire consisted of questions concerning the Radiation Protection Supervisor license, safety management organizations, and problems related to education and training in safety management. Analysis was conducted according to region, type of establishment, and number of beds. The overall response rate was 60%, and no significant difference in response rate was found among regions. Medical institutions that performed nuclear medicine practices without a radiologist participating accounted for 10% of the total. Medical institutions where nurses gave patients intravenous injections of radiopharmaceuticals as part of the nuclear medicine practices accounted for 28% of the total. Of these medical institutions, 59% provided education and training in safety management for nurses. The rate of acquisition of Radiation Protection Supervisor licenses was approximately 70% for radiological technologists and approximately 20% for physicians (regional difference, p=0.02). The rate of medical institutions with safety management organizations was 71% of the total. Among the medical institutions (n=208) without safety management organizations, approximately 56% had 300 beds or fewer. In addition, it became clear that 35% of quasi-public organizations and 44% of private organizations did not provide education and training in safety management (p<0.001, according to establishment). (author)

Safety culture in nuclear installations. Management of safety and safety culture in Indian NPPs

International Nuclear Information System (INIS)

Rawal, S.C.

2002-01-01

Nuclear Power Corporation Of India Ltd. (NPCIL) is a company owned by Government of India and is responsible for Design, Construction, Commissioning, Operation and Decommissioning of Nuclear Power plants in India. Presently, a total of 13 Nuclear power Stations are in operation with an installed capacity of 2620 MWe and 2 VVR type PWR Units of 1000 MWe capacity each, 2 PHWR type units of 500 MWe capacity each and 4 PHWR type 220 MWe capacity each are under construction. NPPs generation capacity has been increased from 70% to 85% in the span Of last 7 years with high level of safety standards. This could be achieved through Management commitment towards building a strong Safety Culture. Safety culture is that assembly of characteristics and attitudes in organisation and individuals which establishes that as an overriding priority nuclear plant safety issues receives the attention warranted by their significance. This definition of safety culture brings out two major components in its manifestation. The framework within which individuals within the organisation works.The attitude and response of individual towards the safety issues over productivity and economics in the organisational work practices. The two attributes of safety culture are built in and upgraded in each individuals through special training at the time of entry in the organisation and later through in built procedures in the work practices, motivation and encouragement for free participation of each individuals. Individuals are encouraged to participate in Quality circle teams at the sectional level and review of safety proposal originated by individuals in Station operation Review Committee at Station level, in addition to this to continuously enhance the safety culture, refresher training courses are being organised at regular intervals. The safety related proposals are categorised in to two namely: Proposals from Operating Plants, and Proposals from projects and Design. The concept of safety

Perspectives on managing nuclear safety at Cernavoda NPP past, present and future

International Nuclear Information System (INIS)

Serban, M.

1997-01-01

The presentation considers the following issues: background of Romanian nuclear programme; 1990 management issues involved in Cernavoda project, nuclear safety perspectives; Cernavoda U1 operating organization today (safety related issues); good practices at Cernavoda NPP

Perspectives on managing nuclear safety at Cernavoda NPP past, present and future

Energy Technology Data Exchange (ETDEWEB)

Serban, M [Technical Safety Directorate, Unit 1., Cernavoda Nuclear Power Plant (Romania)

1997-12-01

The presentation considers the following issues: background of Romanian nuclear programme; 1990 management issues involved in Cernavoda project, nuclear safety perspectives; Cernavoda U1 operating organization today (safety related issues); good practices at Cernavoda NPP.

Farmers’ Knowledge on Pesticide Safety and Pest Management Practices: A Case Study of Vegetable Growers in Chitwan, Nepal

Directory of Open Access Journals (Sweden)

Jhalendra P. Rijal

2018-01-01

Full Text Available Farmers’ knowledge on pesticides and their safe use are critical for implementing effective pest management program. A household survey was conducted using the semi-structured questionnaire to evaluate vegetable growers’ knowledge on pesticide safety and pest management practices in Nepal. Results indicated that chemical pesticides were the primary choice of over 80% growers for pest management. Notably, 90% growers were aware of adverse effects of pesticides on human health and to the environment. Over 84% growers used at least one form of personal protection equipment (PPE during pesticide spray or handling, although the quality and appropriateness of the PPE warrants further investigation. Nearly 17% growers received at least one short-term training on integrated pest management (IPM; however, all of them neither knew the harmful effects of pesticide residues nor practiced proper pesticide disposal methods. Over 90% of growers rely on local pesticide retailers (i.e., Agro-vets for technical know-how about pesticide selection, handling, and use. This study highlighted a need for immediate implementation of strict pesticide use regulations and recommended educational programs for pest control professionals, growers, and pesticide retailers.

Construction firm practices and manager beliefs regarding the employment and safety of teenaged employees: a North Carolina based study.

Science.gov (United States)

Rauscher, Kimberly J; Schulman, Michael; Runyan, Carol W

2010-01-01

The objective of this study was to examine the reported practices of construction firms and the beliefs of firm managers/supervisors with respect to employing youth under age 18 and ensuring their safety. The participants in this study were firm representatives from 54, mostly small to medium sized, construction firms in North Carolina. Survey responses were analyzed for the entire sample and within strata of firm size (1-10, 11+ employees) using descriptive statistics. Percentages and 95% confidence intervals were calculated. Chi-square tests were used to test for statistical significance in differences between firm sizes. The findings suggest limits in the adequacy of safety training given to youth in construction, particularly in light of the minimal experience firms require of young hires, that managers' beliefs about the causes of young worker injury are largely focused on worker behaviors rather than on the presence of hazards, and that managers' compliance with child labor laws may be hampered by their lack of knowledge of these laws and an ambivalence toward their usefulness and enforcement. While larger studies are needed to confirm and advance these findings, when considered along with prior studies, they demonstrate the need to improve the safety of the construction environment for youth. The development of new educational interventions by health and safety professionals targeted at construction firms are supported, as are efforts by government regulators to increase enforcement and employer knowledge of the child labor laws.

Waste management safety

International Nuclear Information System (INIS)

Boehm, H.

1983-01-01

All studies carried out by competent authors of the safety of a waste management concept on the basis of reprocessing of the spent fuel elements and storage in the deep underground of the radioactive waste show that only a minor technical risk is involved in this step. This also holds true when evaluating the accidents which have occurred in waste management facilities. To explain the risk, first the completely different safety aspects of nuclear power plants, reprocessing plants and repositories are outlined together with the safety related characteristics of these plants. Also this comparison indicates that the risk of waste management facilities is considerably lower than the, already very small, risk of nuclear power plants. For the final storage of waste from reprocessing and for the direct storage of fuel elements, the results of safety analyses show that the radiological exposure following an accident with radioactivity releases, even under conservative assumptions, is considerably below the natural radiation exposure. The very small danger to the environment arising from waste management by reprocessing clearly indicates that aspects of technical safety alone will hardly be a major criterion for the decision in favor of one or the other waste management approach. (orig.) [de

Mixed Waste Management Facility Preliminary Safety Analysis Report. Chapters 1 to 20

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

This document provides information on waste management practices, occupational safety, and a site characterization of the Lawrence Livermore National Laboratory. A facility description, safety engineering analysis, mixed waste processing techniques, and auxiliary support systems are included.

Mixed Waste Management Facility Preliminary Safety Analysis Report. Chapters 1 to 20

International Nuclear Information System (INIS)

1994-09-01

This document provides information on waste management practices, occupational safety, and a site characterization of the Lawrence Livermore National Laboratory. A facility description, safety engineering analysis, mixed waste processing techniques, and auxiliary support systems are included

Is road safety management linked to road safety performance?

Science.gov (United States)

Papadimitriou, Eleonora; Yannis, George

2013-10-01

This research aims to explore the relationship between road safety management and road safety performance at country level. For that purpose, an appropriate theoretical framework is selected, namely the 'SUNflower' pyramid, which describes road safety management systems in terms of a five-level hierarchy: (i) structure and culture, (ii) programmes and measures, (iii) 'intermediate' outcomes'--safety performance indicators (SPIs), (iv) final outcomes--fatalities and injuries, and (v) social costs. For each layer of the pyramid, a composite indicator is implemented, on the basis of data for 30 European countries. Especially as regards road safety management indicators, these are estimated on the basis of Categorical Principal Component Analysis upon the responses of a dedicated road safety management questionnaire, jointly created and dispatched by the ETSC/PIN group and the 'DaCoTA' research project. Then, quasi-Poisson models and Beta regression models are developed for linking road safety management indicators and other indicators (i.e. background characteristics, SPIs) with road safety performance. In this context, different indicators of road safety performance are explored: mortality and fatality rates, percentage reduction in fatalities over a given period, a composite indicator of road safety final outcomes, and a composite indicator of 'intermediate' outcomes (SPIs). The results of the analyses suggest that road safety management can be described on the basis of three composite indicators: "vision and strategy", "budget, evaluation and reporting", and "measurement of road user attitudes and behaviours". Moreover, no direct statistical relationship could be established between road safety management indicators and final outcomes. However, a statistical relationship was found between road safety management and 'intermediate' outcomes, which were in turn found to affect 'final' outcomes, confirming the SUNflower approach on the consecutive effect of each layer

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

International Nuclear Information System (INIS)

CARTER, R.P.

1999-01-01

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective

Spent Nuclear Fuel (SNF) project Integrated Safety Management System phase I and II Verification Review Plan

Energy Technology Data Exchange (ETDEWEB)

CARTER, R.P.

1999-11-19

The U.S. Department of Energy (DOE) commits to accomplishing its mission safely. To ensure this objective is met, DOE issued DOE P 450.4, Safety Management System Policy, and incorporated safety management into the DOE Acquisition Regulations ([DEAR] 48 CFR 970.5204-2 and 90.5204-78). Integrated Safety Management (ISM) requires contractors to integrate safety into management and work practices at all levels so that missions are achieved while protecting the public, the worker, and the environment. The contractor is required to describe the Integrated Safety Management System (ISMS) to be used to implement the safety performance objective.

WNA's Policy Document : sustaining global best practices in uranium, mining and processing, principles for managing radiation, health and safety, waste and the environment

International Nuclear Information System (INIS)

Saint-Pierre, S.; Waste Management and Decommissioning Working Group-WM and DW

2008-01-01

The worldwide community of uranium mining and processing recognizes that managing radiation, health and safety, waste and the environment is paramount. Such responsible management applies at all stages of planning and activities. Today we are acting to ensure that all parties directly involved in uranium mining and processing strive to achieve the highest levels of excellence in these fields. We are doing so by sustaining a strong safety culture based on a commitment to common, internationally shared principles. This paper sets out principles for the management of radiation, health and safety, waste and the environment applicable to sites throughout the world. In national and regional settings where nuclear fuel cycle activities are well developed, these principles already serve as the underpinning for 'Codes of Practice' that govern uranium mining and processing. In any given setting, a Code of Practice is needed to guide practical implementation of these principles according to the regional, national or site-specific context. These principles are published in the belief that they hold special relevance for emerging uranium producing countries that do not yet have fully developed regulations for the control of radiation, health and safety, waste and the environment associated with uranium mining and processing. The principles are equally relevant for operators, contractors, and regulators newly engaged in uranium mining and processing. Once national regulations are fully developed, they can be expected to embody these principles. Each principle affirmed here will not apply to the same extent for each party. Ultimately, the precise allocation of responsibilities must be set at the national and local levels. This document holds the status of a policy and ethical declaration by the full WNA membership, which the global nuclear industry. The principles affirmed here are supported by key relevant international organizations, including the IAEA and the global mining

Therapeutic risk management of the suicidal patient: safety planning.

Science.gov (United States)

Matarazzo, Bridget B; Homaifar, Beeta Y; Wortzel, Hal S

2014-05-01

This column is the fourth in a series describing a model for therapeutic risk management of the suicidal patient. Previous columns presented an overview of the therapeutic risk management model, provided recommendations for how to augment risk assessment using structured assessments, and discussed the importance of risk stratification in terms of both severity and temporality. This final column in the series discusses the safety planning intervention as a critical component of therapeutic risk management of suicide risk. We first present concerns related to the relatively common practice of using no-suicide contracts to manage risk. We then present the safety planning intervention as an alternative approach and provide recommendations for how to use this innovative strategy to therapeutically mitigate risk in the suicidal patient.

A model for managing cold-related health and safety risks at workplaces.

Science.gov (United States)

Risikko, Tanja; Mäkinen, Tiina M; Påsche, Arvid; Toivonen, Liisa; Hassi, Juhani

2003-05-01

Cold conditions increase health and safety risks at work in several ways. The effects of cold have not been sufficiently taken into consideration in occupational safety and health practices. A systematic model and methods were developed for managing cold-related health and safety risks at workplaces. The development work was performed, in a context-bound manner, in pilot industries and workplaces. The model can be integrated into the company's occupational health and safety management system, such as OHSAS 18001. The cold risks are identified and assessed by using a checklist. The preventive measures are systematically planned in a written form specifically produced for cold workplaces. It includes the organisational and technical preventive measures, protective clothing and personal protective equipment, as well as training and information of the personnel. According to the model, all the workers, foremen, occupational safety personnel and occupational health care personnel are trained to recognise the cold risks and to conduct preventive actions. The developed model was evaluated in the context of cold outdoor (construction) and indoor work (fish processing), and by occupational health and safety professionals. According to the feedback, the model and methods were easy to use after a one-day introduction session. The continuum between the cold risk assessment and management worked well, although there was some overlap in the documentation. The cold risk management model and its methods form an essential part of ISO CD 15743 Strategy for risk assessment, management and work practice in cold environments.

Role of management in the development of safety culture at the operating organization

Energy Technology Data Exchange (ETDEWEB)

Zhong, W [International Atomic Energy Agency, Vienna (Austria)

1997-09-01

Role of management in the development of safety culture at the operating organization to offer practical suggestions to assist in the development or improvement of a progressive safety culture. 2 figs.

Role of management in the development of safety culture at the operating organization

International Nuclear Information System (INIS)

Zhong, W.

1997-01-01

Role of management in the development of safety culture at the operating organization to offer practical suggestions to assist in the development or improvement of a progressive safety culture. 2 figs

Leadership and Management for Safety. General Safety Requirements (Arabic Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Chinese Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (French Edition)

International Nuclear Information System (INIS)

2016-01-01

This Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leadership and Management for Safety. General Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

his Safety Requirements publication establishes requirements that support Principle 3 of the Fundamental Safety Principles in relation to establishing, sustaining and continuously improving leadership and management for safety and an integrated management system. It emphasizes that leadership for safety, management for safety, an effective management system and a systemic approach (i.e. an approach in which interactions between technical, human and organizational factors are duly considered) are all essential to the specification and application of adequate safety measures and to the fostering of a strong safety culture. Leadership and an effective management system will integrate safety, health, environmental, security, quality, human-and-organizational factors, societal and economic elements. The management system will ensure the fostering of a strong safety culture, regular assessment of performance and the application of lessons from experience. The publication is intended for use by regulatory bodies, operating organizations and other organizations concerned with facilities and activities that give rise to radiation risks.

Leachables and extractables handbook: safety evaluation, qualification, and best practices applied to inhalation drug products

National Research Council Canada - National Science Library

Ball, Douglas J

2012-01-01

...). It discusses best practices for evaluation and management of leachables and extractables throughout the pharma product lifecycle by providing practical knowledge about how and why safety thresholds were developed...

Agrichem.ical safety practices on farm.s in the western Cape

African Journals Online (AJOL)

Abstract In order to study agrichemical safety practices in a rural farming area in the western ... their work, the environment and intentional misuse.I.}-; Little information is ... the farmer, farm manager or supervisor directly involved in production ...

The Dynamics of Agile Practices for Safety-Critical Software Development

DEFF Research Database (Denmark)

Nielsen, Peter Axel; Tordrup Heeager, Lise

2017-01-01

This short paper reports from a case study of the agile development of safety-critical software. It utilizes a framework of dynamic relationships between agile practices with the purpose of demonstrating the utility of the framework to understand a case in its context, and it shows significant...... dynamics. The study is concluded by pointing at which further research on the framework is required to use the framework in managing the agile development of safety-critical software....

A Microbial Assessment Scheme to measure microbial performance of Food Safety Management Systems

NARCIS (Netherlands)

Jacxsens, L.; Kussaga, J.; Luning, P.A.; Spiegel, van der M.; Devlieghere, F.; Uyttendaele, M.

2009-01-01

A Food Safety Management System (FSMS) implemented in a food processing industry is based on Good Hygienic Practices (GHP), Hazard Analysis Critical Control Point (HACCP) principles and should address both food safety control and assurance activities in order to guarantee food safety. One of the

Managing occupational risk in creative practice: a new perspective for occupational health and safety.

Science.gov (United States)

Oughton, Nicholas

2013-01-01

There has been little recognition of the fact that creative production operates in a somewhat different environment and timeframe to that associated with traditional industries. This has resulted in the application of an orthodox, generic or ``one size fits all'' framework of Occupational Health and Safety (OHS) systems across all industries. With the rapid growth of ``creative industry,'' certain challenges arise from the application of this "generic" strategy, mainly because the systems currently employed may not be entirely suitable for creative practice. Some OHS practitioners suggest that the current OHS paradigm is failing. This paper questions the appropriateness of applying a twentieth century OHS model in the present industrial context, and considers what framework will best provide for the well-being of creative workers and their enterprise in the twenty-first century. The paper questions the notion of "Risk" and the paradox associated with "Risk Management," particularly in the context of the creative process. Clearly, risk taking contributes to creative enterprise and effective risk management should accommodate both risk minimization and risk exploitation.

33 CFR 151.2037 - If my vessel cannot conduct ballast water management practices because of its voyage and/or...

Science.gov (United States)

2010-07-01

... ballast water management practices because of its voyage and/or safety concerns, will I be prohibited from... is inoperable must employ one of the other ballast water management practices stated in § 151.2035(b). If the vessel cannot employ other ballast water management practices due to voyage or safety concerns...

EUROSAFE Forum for nuclear safety. Towards Convergence of Technical Nuclear Safety Practices in Europe. Safety Improvements - Reasons, Strategies, Implementation

Energy Technology Data Exchange (ETDEWEB)

Erven, Ulrich (ed.) [Gesellschaft fuer Anlagen- und Reaktorsicherheit, GRS mbH, Schwertnergasse 1, 50667 Koeln (Germany); Cherie, Jean-Bernard (ed.) [Institut de Radioprotection et de Surete Nucleaire, IRSN, BP 17, 92262 Fontenay-aux-Roses Cedex (France); Boeck, Benoit De (ed.) [Association Vincotte Nuclear, AVN, Rue Walcourt 148, 1070 Bruxelles (Belgium)

2005-07-01

The EUROSAFE Forum for Nuclear Safety is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE Web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety. The goal is to share experiences, to exchange technical and scientific opinions, and to conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum on 2005 focused on Safety Improvements, Reasons - Strategies - Implementation, from the point of view of the authorities, TSOs and industry. Latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe are presented. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining

EUROSAFE Forum for nuclear safety. Towards Convergence of Technical Nuclear Safety Practices in Europe. Safety Improvements - Reasons, Strategies, Implementation

Energy Technology Data Exchange (ETDEWEB)

Erven, Ulrich [Gesellschaft fuer Anlagen- und Reaktorsicherheit, GRS mbH, Schwertnergasse 1, 50667 Koeln (Germany); Cherie, Jean-Bernard [Institut de Radioprotection et de Surete Nucleaire, IRSN, BP 17, 92262 Fontenay-aux-Roses Cedex (France); Boeck, Benoit De [Association Vincotte Nuclear, AVN, Rue Walcourt 148, 1070 Bruxelles (Belgium)

2005-07-01

The EUROSAFE Forum for Nuclear Safety is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE Web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety. The goal is to share experiences, to exchange technical and scientific opinions, and to conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum on 2005 focused on Safety Improvements, Reasons - Strategies - Implementation, from the point of view of the authorities, TSOs and industry. Latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe are presented. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining

IAEA Safety Standards on Management Systems and Safety Culture

International Nuclear Information System (INIS)

Persson, Kerstin Dahlgren

2007-01-01

The IAEA has developed a new set of Safety Standard for applying an integrated Management System for facilities and activities. The objective of the new Safety Standards is to define requirements and provide guidance for establishing, implementing, assessing and continually improving a Management System that integrates safety, health, environmental, security, quality and economic related elements to ensure that safety is properly taken into account in all the activities of an organization. With an integrated approach to management system it is also necessary to include the aspect of culture, where the organizational culture and safety culture is seen as crucial elements of the successful implementation of this management system and the attainment of all the goals and particularly the safety goals of the organization. The IAEA has developed a set of service aimed at assisting it's Member States in establishing. Implementing, assessing and continually improving an integrated management system. (author)

Study on European Nuclear Safety Practices during Planned Outages at Nuclear Power Plants

International Nuclear Information System (INIS)

2001-12-01

The present project was aimed at providing: a description of the current status of nuclear safety practices during planned outages at nuclear power plants followed in Europe; the criteria for the safety analysis of future reactors at the design stage; proposing a set of recommendations on good practices and criteria leading to the improvement of nuclear safety during those conditions. The work was organised in 3 phases: Collecting data on current practices; Analysis of questionnaire answers and drawing up of safety good practices references and recommendations; Collecting relevant ideas related to the future reactors at design stage (European Pressurised Water Reactor, European Passive Plant project, European Utilities Requirements and Utilities Requirement Document project). The key element of the performed work was the detailed questionnaire, based on bibliographical review, expert experience and outage practices available in the working team. Different safety areas and activities were covered: outage context; nuclear safety; outage strategy, organisation and control; operating feedback; use of Probabilistic Safety Assessment. The questionnaire was answered by 12 European nuclear power plants, representing 9 different European countries and three different types of reactors (Pressurised Water Reactor, Boiling Water Reactor and Water Water Energy Reactor). Conclusions were drawn under the following headers: Organisational survey and generalities Organisational effectiveness Quality of maintenance Quality of operation Engineering support, management of modification Specific aspects Each analysed subject includes the following topics: Questions background with a summary and the aim of the questions. Current status, that describes common practices, as derived from the answers to the questionnaire, and some examples of good specific practices. Identified good practices. (author)

Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

International Nuclear Information System (INIS)

Song, Tae Young

2007-01-01

At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas

Development of a Safety Assessment Information System for the Management of Periodic Safety Assessment Activities

Energy Technology Data Exchange (ETDEWEB)

Song, Tae Young [Nuclear Engineering and Technology Institute, Daejeon (Korea, Republic of)

2007-07-01

At present, the 10-year Periodic Safety Review(PSR) has been performing to confirm all the aspects of safety issues for all the operating plants in compliance with domestic nuclear law of article 23, subarticle 3. For each plant, in addition, Probabilistic Safety Assessment(PSA) and Severe Accident Management Guideline(SAMG) are being implemented and revised periodically to reflect the latest safety level according to principle fulfillment of severe accident policy statement. The assessment reports, as one of outcomes from these activities, are submitted into and reviewed by domestic regulatory body. During reviewing (in-office duty) and licensing (regulatory duty) process, a large number of outcomes of which most are the formal technical reports and licensing materials, are inevitably produced. Moreover, repeated review process over the plants can make them accumulated and produce a variety of documents additionally. This circumstance motivates to develop effective tool or system for the management of these reports and related technical documents for the future use in licensing process and for subsequent plant assessments. This paper presents the development status of Safety Assessment Information System(SAIS) which manages safety-related documents of PSR, PSA and SAMG for practical use for experienced engineers in charge of these areas.

Knowledge, attitude, and practice (KAP) of 'teaching laboratory' technicians towards laboratory safety and waste management: a pilot interventional study.

Science.gov (United States)

El-Gilany, A-H; El-Shaer, S; Khashaba, E; El-Dakroory, S A; Omar, N

2017-06-01

A quasi-experimental study was performed on 20 technicians working in the Faculty of Medicine, Mansoura University, Egypt. The knowledge, attitude, and practice (KAP) of laboratory technicians was measured before and two months after enrolling them in an intervention programme about laboratory best practice procedures. The programme addressed laboratory safety and medical waste management. The assessment was performed using a validated Arabic self-administered questionnaire. Pre- and post-intervention scores were compared using non-parametric tests. There are significant increases in the scores of KAP after implementation of the training programme. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Safety and health: Principles and practices in the laboratory

International Nuclear Information System (INIS)

Fakhrul Razi Ahmadun; Guan, Chuan Teong; Mohd Halim Shah Ismail

2005-01-01

Ignorance, carelessness or improper practices in the laboratory or the improper handling of hazardous or toxic materials may lead to work accidents and work-related ill-health. Laboratory users and administrators cannot afford to overlook these possible consequences due to the misconduct of laboratory practices and should decide how best to manage the health and safety aspects in the laboratory. This book has been written for safety representatives of colleges and universities, for lectures, teachers and students, and for researchers working in laboratories. It is also for everyone responsible for laboratory safety, laboratory accidents and their consequences. The emphasis is on hazards to health and safety, with the focus on the general hazards in the laboratory, how they arise and how to prevent, how to eliminate and control them. Special hazards will also be discussed such as radiation hazards and human factors. This book also provides information on governmental and non-governmental agencies and authorities, emergency contact numbers of relevant authorities, a list of Malaysia occupational safety and health related legislation and some useful occupational safety and health web sites. Readers will find that the information contained in this book will serve as the foundation for laboratory users safety policy. A set of Laboratory Safety Forms for a typical laboratory is also available in the appendix for reference. Laboratory users can use and adapt these forms for their own laboratory requirements. (author)

Configuration and Data Management Process and the System Safety Professional

Science.gov (United States)

Shivers, Charles Herbert; Parker, Nelson C. (Technical Monitor)

2001-01-01

This article presents a discussion of the configuration management (CM) and the Data Management (DM) functions and provides a perspective of the importance of configuration and data management processes to the success of system safety activities. The article addresses the basic requirements of configuration and data management generally based on NASA configuration and data management policies and practices, although the concepts are likely to represent processes of any public or private organization's well-designed configuration and data management program.

Patient Safety Based Knowledge Management SECI to Improve Nusrsing Students Competency

Directory of Open Access Journals (Sweden)

Joanggi Wiriatarina Harianto

2015-10-01

Full Text Available Introduction: Patient safety is an important component of health services quality,and  basic principles of patient care. Nursing students also have a great potential to make an action that could endanger the patient, because hospital is one of student practice area. The purpose of this study was to improve the nursing students competency in patient safety by using knowledge management SECI approached. Method: The study used exploratory survey, and quasy experiment. The samples were some of nursing students of STIKes Muhammadiyah Samarinda who were on internship programme that selected using simple random sampling technique, in total of 54 students. This research’s variables were the knowledge management SECI based-patient safety and nursing student’s competency. The data were collected by using questionnaires and observation. The data were analyze by using Partial Least Square (PLS. Result: The result showed that there were significant influence the implementation of a model patient safety based knowledge management seci on increased competence nursing students. Discussion: Improved student competency in patient safety using SECI knowledge management was carried out in four phases, that is Socialization, Externalization, Combination, and Internalization. The result was a new knowledge related to patient safety that able to improve the student’s competency.. Keywords: Patient safety, Knowledge management, SECI, competency

Application of the management system for facilities and activities. Safety guide

International Nuclear Information System (INIS)

2006-01-01

This Safety Guide supports the Safety Requirements publication on The Management System for Facilities and Activities. It provides generic guidance to aid in establishing, implementing, assessing and continually improving a management system that complies with the requirements established. In addition to this Safety Guide, there are a number of Safety Guides for specific technical areas. Together these provide all the guidance necessary for implementing these requirements. This publication supersedes Safety Series No. 50-SG-Q1-Q7 (1996). The guidance provided here may be used by organizations in the following ways: - To assist in the development of the management systems of organizations directly responsible for operating facilities and activities and providing services for: Nuclear facilities; Activities using sources of ionizing radiation; Radioactive waste management; The transport of radioactive material; Radiation protection activities; Any other practices or circumstances in which people may be exposed to radiation from naturally occurring or artificial sources; The regulation of such facilities and activities; - To assist in the development of the management systems of the relevant regulatory bodies; - By the operator, to specify to a supplier, via contractual documentation, any guidance of this Safety Guide that should be included in the supplier's management system for the supply and delivery of products

Factors Affecting the Perception of Importance and Practice of Patient Safety Management among Hospital Employees in Korea.

Science.gov (United States)

Kim, In-Sook; Park, MiJeong; Park, Mi-Young; Yoo, Hana; Choi, Jihea

2013-03-01

The study was undertaken to identify factors affecting perception of the importance and practice of patient safety management (PSM) among hospital employees in Korea. This study was conducted using a descriptive design and a self-report questionnaire. Two hundred and eighty employees were recruited from three hospitals using a convenience sampling method. Measures were perception of the importance, practice, and characteristics of PSM. Data were analyzed using descriptive statistics including t test, one-way analysis of variance, Pearson's correlation analysis, and multiple regression. Factors affecting perception of the importance of PSM were whether hospital employees were in contact with patients while on duty, weekly working hours, education on PSM, and perceived adequacy of PSM system construction. Factors affecting the practice of PSM were perceived adequacy of work load, perceived adequacy of PSM system construction and perception of its importance. The findings of this study indicate a need for developing strategies to improve perception of the importance and practice of PSM among all hospital employees, and provide a reference for future experimental studies. Copyright © 2013. Published by Elsevier B.V.

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

A multi-disciplinary approach to medication safety and the implication for nursing education and practice.

Science.gov (United States)

Adhikari, Radha; Tocher, Jennifer; Smith, Pam; Corcoran, Janet; MacArthur, Juliet

2014-02-01

Medication management is a complex multi-stage and multi-disciplinary process, involving doctors, pharmacists, nurses and patients. Errors can occur at any stage from prescribing, dispensing and administering, to recording and reporting. There are a number of safety mechanisms built into the medication management system and it is recognised that nurses are the final stage of defence. However, medication error still remains a major challenge to patient safety globally. This paper aims to illustrate two main aspects of medication safety practices that have been elicited from an action research study in a Scottish Health Board and three local Higher Education Institutions: firstly current medication safety practices in two clinical settings; and secondly pre and post-registration nursing education and teaching on medication safety. This paper is based on Phase One and Two of an Action Research project. An ethnography-style observational method, influenced by an Appreciative Inquiry (AI) approach was adapted to study the everyday medication management systems and practices of two hospital wards. This was supplemented by seven in-depth interviews with nursing staff, numerous informal discussions with healthcare professionals, two focus-groups, one peer-interview and two in-depth individual interviews with final year nursing students from three Higher Education Institutions in Scotland. This paper highlights the current positive practical efforts in medication safety practices in the chosen clinical areas. Nursing staff do employ the traditional 'five right' principles - right patient, right medication, right dose, right route and right time - for safe administration. Nursing students are taught these principles in their pre-registration nursing education. However, there are some other challenges remaining: these include the establishment of a complete medication history (reconciliation) when patients come to hospital, the provision of an in-depth training in

Managing electrical safety

CERN Document Server

Wiggins, James H, Jr

2001-01-01

Managing Electrical Safety provides an overview of electric basics, hazards, and established standards that enables you to understand the hazards you are likely to encounter in your workplace. Focusing on typical industrial environments-which utilize voltages much higher than household or office circuits-the author identifies the eight key components of an electrical safety program and examines each using a model safety management process. You'll learn how to identify electrical hazards, how to prescribe necessary electrical Personal Protective Equipment, how to ensure that equipment is de-ene

Environmental Management Waste Management Facility (EMWMF) Site-Specific Health and Safety Plan, Oak Ridge, Tennessee

Energy Technology Data Exchange (ETDEWEB)

Flynn, N.C. Bechtel Jacobs

2008-04-21

The Bechtel Jacobs Company LLC (BJC) policy is to provide a safe and healthy workplace for all employees and subcontractors. The implementation of this policy requires that operations of the Environmental Management Waste Management Facility (EMWMF), located one-half mile west of the U.S. Department of Energy (DOE) Y-12 National Security Complex, be guided by an overall plan and consistent proactive approach to environment, safety and health (ES&H) issues. The BJC governing document for worker safety and health, BJC/OR-1745, 'Worker Safety and Health Program', describes the key elements of the BJC Safety and Industrial Hygiene (IH) programs, which includes the requirement for development and implementation of a site-specific Health and Safety Plan (HASP) where required by regulation (refer also to BJC-EH-1012, 'Development and Approval of Safety and Health Plans'). BJC/OR-1745, 'Worker Safety and Health Program', implements the requirements for worker protection contained in Title 10 Code of Federal Regulations (CFR) Part 851. The EMWMF site-specific HASP requirements identifies safe operating procedures, work controls, personal protective equipment, roles and responsibilities, potential site hazards and control measures, site access requirements, frequency and types of monitoring, site work areas, decontamination procedures, and outlines emergency response actions. This HASP will be available on site for use by all workers, management and supervisors, oversight personnel and visitors. All EMWMF assigned personnel will be briefed on the contents of this HASP and will be required to follow the procedures and protocols as specified. The policies and procedures referenced in this HASP apply to all EMWMF operations activities. In addition the HASP establishes ES&H criteria for the day-to-day activities to prevent or minimize any adverse effect on the environment and personnel safety and health and to meet standards that define acceptable

Implementation of the safety assessment in the practice of industrial radiography

International Nuclear Information System (INIS)

Alfonso Pallarés, C.; Pérez Reyes, Y.

2015-01-01

The CNSN as regulatory authority has regulatory control processes based on regulations, permits, inspections and limitation to ensure the supervision and control of the practice of industrial radiography. On the other hand in the light of the new regulations approved and being implemented such as: Resolution 334/2011 CITMA 'Regulation on Notification and authorization of practices and activities associated with the use of ionizing radiation sources' and Resolution 17 / 2012, Security Guide: Security Assessment Practices and Activities associated with the use of ionizing radiation (recommendatory), it is necessary for compliance with regulatory requirements concerning the safety assessment. Since 2009 it has been applied this experience in different medical practices and industry, providing a systematic and consistent basis, to the safety assessment of all facilities and activities, which has helped increase the confidence that has been achieved an adequate level of security. The work was able to identify that there is a group of barriers operating in the risk reduction in various accident sequences and therefore have a relative importance in risk reduction, recommendations in this regard to improve the program management of safety in the practice of industrial radiography. [es

EVALUATION OF BIOMEDICAL WASTE MANAGEMENT PRACTICES IN MULTI-SPECIALITY TERTIARY HOSPITAL

Directory of Open Access Journals (Sweden)

Shalini Srivastav

2010-06-01

Full Text Available Background: Biomedical Waste (BMW, collection and proper disposal has become a significant concern for both the medical and the general community The scientific “Hospital waste Management “is of vital importance as its improper management poses risks to the health care workers ,waste handlers patients, community in general and largely the environment. Objectives: (i To assess current practices of Bio-medical Waste management including generation, collection, transportation storage, treatment and disposal technologies in tertiary health care center. (ii To assess health andsafetypracticesfor the health care personnel involved in Bio-Medical waste Management. Materials and Methods: Waste management practices in tertiary care-centre was studied during May 2010 June 2010. The information/data regarding Bio-Medical Waste Management practices and safety was collected by way of semi structured interview, proforma being the one used for WASTE AUDITING QUESTIONNAIRE. The information collected was verified by personal observations of waste management practices in each ward of hospital. Results : SRMS-IMS generates 1. 25Kgs waste per bed per day and maximum waste is generated in wards. The institute has got separate color coded bins in each ward for collection of waste but segregation practices needs to be more refined. The safety measures taken by health care workers was not satisfactory it was not due to unavailability of Personal protective measures but because of un-awareness of health hazards which may occur due to improper waste management practices. Thus it is concluded that there should be strict implementation of a waste management policy set up in the institute, training and motivation must be given paramount importance to meet the current needs and standard of bio-medical waste management.

Implementation of the safety culture for HANARO Safety Management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which the management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of the safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of safety management in nuclear activities for a reactor application and utilization has also been emphasized more than 10 years in HANARO which is a 30 MW multi-purpose research reactor and achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation like the seminars and lectures related to safety matters, participation in international workshops, the development of safety culture indicators, the survey on the attitude of safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e-Learning program for safety education. (author)

On the Use of Safety Certification Practices in Autonomous Field Robot Software Development

DEFF Research Database (Denmark)

Mogensen, Johann Thor Ingibergsson; Schultz, Ulrik Pagh; Kuhrmann, Marco

2015-01-01

reactions or performance in malfunctioning systems, and influence industry regarding software development and project management. However, academia seemingly did not reach the same degree of utilisation of standards. This paper presents the findings from a systematic mapping study in which we study...... the state-of-the-art in developing software for safety-critical software for autonomous field robots. The purpose of the study is to identify practices used for the development of autonomous field robots and how these practices relate to available safety standards. Our findings from reviewing 49 papers show...... on the quest for suitable approaches to develop safety-critical software, awaiting appropriate standards for this support....

Knowledge Management for Safety Regulators: Cooperation to Achieve a Much Needed Product

International Nuclear Information System (INIS)

Mallick, S.

2016-01-01

Full text: Knowledge management (KM) has been identified by a number of IAEA documents as one of the key factors that can contribute to the safe and efficient operation of nuclear facilities in Member States. The IAEA Strategic Approaches to Education and Training in Nuclear and Radiation, Transport and Waste Safety identify and underline KM as an important line of action for effective national and organizational strategies in education and training. The capacity building “umbrella concept”, developed within the Action Plan in Nuclear Safety, also recognizes KM as one of the main four pillars (Education and Training, Human Resource Development, Knowledge Management and Knowledge Networks) of capacity building. Within existing IAEA publications, there is currently no specific practical guidance on how to develop and implement KM programmes for regulators. As such, in 2014, the IAEA Steering Committee on Regulatory Capacity Building and Knowledge Management requested the IAEA to develop a publication providing such practical guidance. The objective of the publication is to provide practical guidance to Member States on how to plan, establish and maintain an effective safety KM programme for regulators of facilities and activities. The report will identify benefits and uses of KM by regulators and will describe how a regulator could use KM in support of its functions. This presentation will provide an overview of the Knowledge Management for Safety Regulators document while highlighting the cross-departmental cooperation (i.e., NS and NE) used in its development. Furthermore, this presentation will provide insight into the challenges currently being faced by safety regulators vis-à-vis KM programmes and present potential paths forward with respect to the definition of efficient and effective KM indicators. (author

Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations.

Science.gov (United States)

Mohammadfam, Iraj; Kamalinia, Mojtaba; Momeni, Mansour; Golmohammadi, Rostam; Hamidi, Yadollah; Soltanian, Alireza

2017-06-01

Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified and three noncertified companies. Findings indicate that the performance of certified companies with respect to occupational health and safety management practices is significantly better than that of noncertified companies. Occupational Health and Safety Assessment Series 18001-certified companies have a better level of occupational health and safety; this supports the argument that Occupational Health and Safety Management Systems play an important strategic role in health and safety in the workplace.

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jongsup; Han, Geeyang; Kim, Iksoo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG (International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safely. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30MW multi-purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementations have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of a e-learning program for a safety education purpose

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

Science.gov (United States)

Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

2018-04-26

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

Demonstrating a correlation between the maturity of road safety practices and road safety incidents.

Science.gov (United States)

Amador, Luis; Willis, Christopher Joseph

2014-01-01

The objective of this study is to demonstrate a correlation between the maturity of a country's road safety practices and road safety incidents. Firstly, data on a number of road injuries and fatalities for 129 countries were extracted from the United Nations Global Status on Road Safety database. These data were subdivided according to road safety incident and accident causation factors and normalized based on vehicular fleet (per 1000 vehicles) and road network (per meter of paved road). Secondly, a road safety maturity model was developed based on an adaptation of the concept of process maturity modeling. The maturity of countries with respect to 10 road safety practices was determined through the identification of indicators recorded in the United Nations Global Status of Road Safety Database. Plots of normalized road safety performance of the 129 countries against their maturity scores for each road safety practice as well as an aggregation of the road safety practices were developed. An analysis of variance was done to determine the extent of the correlation between the road safety maturity of the countries and their performance. In addition, a full Bayesian analysis was done to confirm the correlation of each of the road safety practices with injuries and fatalities. Regression analysis for fatalities, injuries, and combined accidents identified maturity with respect to road safety practices associated with speed limits and use of alternative modes as being the most significant predictors of traffic fatalities. A full Bayesian regression confirms that there is a correlation between the maturity of road safety practices and road safety incidents. Road safety practices associated with enforcement of speed limits and promotion of alternative modes are the most significant road safety practices toward which mature countries have concentrated their efforts, resulting in a lower frequency of fatalities, injury rates, and property damage accidents. The authors

Implementation of the safety culture for HANARO safety management

Energy Technology Data Exchange (ETDEWEB)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2008-11-15

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose.

Implementation of the safety culture for HANARO safety management

International Nuclear Information System (INIS)

Wu, Jong Sup; Han, Gee Yang; Kim, Ik Soo

2008-01-01

Safety is the fundamental principal upon which a management system is based. The IAEA INSAG(International Nuclear Safety Group) states the general aims of a safety management system. One of which is to foster and support a strong safety culture through the development and reinforcement of good safety attitudes and behavior in individuals and teams, so as to allow them to carry out their tasks safety. The safety culture activities have been implemented and the importance of a safety management in nuclear activities for a reactor application and utilization has also been emphasized for more than 10 years in HANARO which is a 30 MW multi purpose research reactor that achieved its first criticality in February 1995. The safety culture activities and implementation have been conducted continuously to enhance its safe operation such as the seminars and lectures related to safety matters, participation in international workshops and the development of safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture indicators, a survey on the attitude of HANARO staff toward the safety culture, the development of operational safety performance indicators (SPIs), the preparation of a safety text book and the development of an e Learning program for a safety education purpose

Using objectives for managing safety and health

International Nuclear Information System (INIS)

Shoemaker, D.R.

1990-01-01

This morning I am going to talk about the International Mine Safety Rating System of the International Loss Control Institute. At the Questa mine we simply call it the ILCI System. The ILCI System has been in effect at Questa since 1982. Today, I want to offer you an outline of the system and a little bit of our experience with the system at Molycorp. In 1965, Molycorp started large-scale open-pit mining at Questa, New Mexico. In 1978 the decision was made to phase out surface mining and develop a large underground mine. Construction started in 1979, and production commenced in 1983. In 1982, with a work force approaching 900, and a 15-man safety department, we had an accident frequency rate twice the national average. At that point, as we were preparing to start underground production, we decided to become part of the International Safety Rating System. The International Safety Rating System (ISRS) is a modern safety program evaluation system. It provides the means for a systematic analysis of each element of the safety program to determine the extent and quality of management control. Auditing has long been an accepted management practice to ensure that critical business operations are performed in an efficient and profitable manner. Likewise, management has inadequate verification of the effectiveness of a safety program without the kind of audit this rating system provides. Today, largely because of the ILCI system our accident/incident rate has dropped to almost half the national average. Our production costs are nearly half of their historical high. A significant part of the savings has come from decreased expenditures for total accident losses as a result of our lower accident rates

Risk management for industrial safety

International Nuclear Information System (INIS)

Novogno, A.

1989-01-01

The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

Risk Assessment in the UK Health and Safety System: Theory and Practice

Directory of Open Access Journals (Sweden)

Karen Russ

2010-09-01

Full Text Available In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP. How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

Risk Assessment in the UK Health and Safety System: Theory and Practice.

Science.gov (United States)

Russ, Karen

2010-09-01

In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable' (SFAIRP). How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

Fluor Hanford Integrated Safety Management System Phase II Verification Vol 1 & Vol 2

Energy Technology Data Exchange (ETDEWEB)

PARSONS, J.E.

2000-07-15

The U.S. Department of Energy (DOE) is committed to conducting work efficiently and in a manner that ensures protection of the workers, public, and environment. DOE policy mandates that safety management systems be used to systematically integrate safety into management and work practices at all levels while accomplishing mission goals in an effective and efficient manner. The purpose of the Fluor Hanford (FH) Integrated Safety Management System (ISMS) verification was to determine whether FH's ISM system and processes are sufficiently implemented to accomplish the goal of ''Do work safely.'' The purpose of the DOE, Richland Operations Office (RL) verification was to determine whether RL has established processes that adequately describe RL's role in safety management and if those processes are sufficiently implemented.

Safety Learning, Organizational Contradictions and the Dynamics of Safety Practice

Science.gov (United States)

Ripamonti, Silvio Carlo; Scaratti, Giuseppe

2015-01-01

Purpose: The purpose of this paper is to explore the enactment of safety routines in a transshipment port. Research on work safety and reliability has largely neglected the role of the workers' knowledge in practice in the enactment of organisational safety. The workers' lack of compliance with safety regulations represents an enduring problem…

Health care waste management practice in a hospital.

Science.gov (United States)

Paudel, R; Pradhan, B

2010-10-01

Health-care waste is a by-product of health care. Its poor management exposes health-care workers, waste handlers and the community to infections, toxic effects and injuries including damage of the environment. It also creates opportunities for the collection of disposable medical equipment, its re-sale and potential re-use without sterilization, which causes an important burden of disease worldwide. The purpose of this study was to find out health care waste management practice in hospital. A cross-sectional study was conducted in Narayani Sub-Regional Hospital, Birgunj from May to October 2006 using both qualitative and quantitative methods. Study population was four different departments of the hospital (Medical/Paediatric, Surgical/Ortho, Gynae/Obstetric and Emergency), Medical Superintendent, In-charges of four different departments and all sweepers. Data was collected using interview, group discussion, observation and measurement by weight and volume. Total health-care waste generated was 128.4 kg per day while 0.8 kg per patient per day. The composition of health care waste was found to be 96.8 kg (75.4%) general waste, 24.1 kg (8.8%) hazardous waste and 7.5 kg (5.8%) sharps per day by weight. Health staffs and sweepers were not practicing the waste segregation. Occupational health and safety was not given due attention. Majority of the sweepers were unaware of waste management and need of safety measures to protect their own health. Health care waste management practice in the hospital was unsatisfactory because of the lack of waste management plan and carelessness of patients, visitors and staffs. Therefore the hospital should develop the waste management plan and strictly follow the National Health Care Waste Management Guideline.

Safety standards, legislation and codes of practice for fuel cell manufacture and operation

Energy Technology Data Exchange (ETDEWEB)

Wilcox, C.P.

1999-07-01

This report examines safety standards, legislation and codes of practice for fuel cell manufacture and operation in the UK, Europe and internationally. Management of health and safety in the UK is discussed, and the characteristics of phosphoric acid (PAFC), proton exchange membrane (PEM), molten carbonate (MCFC), solid oxide (SOFC) fuel cells are described. Fuel cell power plant standards and manufacture in the UK, design and operational considerations, end of life disposal, automotive fuel cell system, and fuelling and vehicular concerns are explored, and standards, legislation and codes of practice are explained in the appendix.

National report of the Slovak Republic. Compiled in terms of the joint convention on the safety of spent fuel management and on the safety of radioactive waste management. April 2003

International Nuclear Information System (INIS)

Burclova, J.; Ivan, J.; Jurina, V.

2003-04-01

A brief national safety report of the Slovak Republic in 2003 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented. These activities are reported under the headings: (A) Introduction; (B) Policies and practices; (C) Scope of application; (D) Inventories and lists; (E) Legislation and regulation; (F) Other general safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste management; (I) Transboundary movement; (J) Disused sealed sources; (K) Planned activities to improve safety; (L) Annexes: (I and II) List of SF and RAW management nuclear facilities; (III) List of nuclear facilities subject to decommissioning; (IV) Inventory of stored SF (t HM); (V) Inventory of disposed of and stored RAW; (VI) List of selected national laws, regulations and guidelines; (VII) List of international expert reports and safety analysis reports; (VIII) List of authors

National report of the Slovak Republic. Compiled in terms of the joint convention on the safety of spent fuel management and on the safety of radioactive waste management. April 2003

Energy Technology Data Exchange (ETDEWEB)

Burclova, J [Nuclear Regulatory Authority of the Slovak Republic, Bratislava (Slovakia); Ivan, J [Slovenske elektrarne, a.s., Bratislava (Slovakia); Jurina, V [Health Ministry of the Slovak Republic, Bratislava (Slovakia); and others

2003-04-01

A brief national safety report of the Slovak Republic in 2003 is presented. A account of activities carried out by the Nuclear Regulatory Authority of the Slovak Republic (UJD) is presented. These activities are reported under the headings: (A) Introduction; (B) Policies and practices; (C) Scope of application; (D) Inventories and lists; (E) Legislation and regulation; (F) Other general safety provisions; (G) Safety of spent fuel management; (H) Safety of radioactive waste management; (I) Transboundary movement; (J) Disused sealed sources; (K) Planned activities to improve safety; (L) Annexes: (I and II) List of SF and RAW management nuclear facilities; (III) List of nuclear facilities subject to decommissioning; (IV) Inventory of stored SF (t HM); (V) Inventory of disposed of and stored RAW; (VI) List of selected national laws, regulations and guidelines; (VII) List of international expert reports and safety analysis reports; (VIII) List of authors.

Safety and human factors impacts of introducing quality management into high-risk industries: A field study

International Nuclear Information System (INIS)

Chollet, M.G.; Normier, C.; Girault, M.; Tasset, D.

2002-01-01

The Institute for Radiological Protection and Nuclear Safety has undertaken a study for getting a better understanding, especially in terms of Safety and Human Factors, of the changes caused by the progressive deployment of the Quality Management in French high risk industries. This study is based on both theoretical elements from the human sciences and management and practical elements from the field, collected from interviews in large French industrial sites involved in integrating this management method. The results show frequent discrepancies between theory, which is very positive and production-oriented, and reality, which is more complex and subtle, ever looking for trade-offs between production requirements and safety constraints. Thus, each step forward announced in the literature may be matched by possible steps backward in terms of safety on the ground. Where, in theory, processes enable practices to be mastered, in practice they can reduce autonomy and fossilize know-how. Where theoretically continuous improvement stimulates and strengthens performances, in reality it can also generate stress and deadlock. Where theoretically personal commitment and collective responsibility work towards all-out performance, in reality they can also operate to conceal safety deviations and infringements. The assessment of Quality Management processes in the nuclear field will benefit from these results raised from theoretical review and confirmed by similar management changes. (author)

MANAGEMENT PROCESS OF HEALTH AND SAFETY RISK IN THE NIGERIA CONSTRUCTION INDUSTRY

OpenAIRE

Akwu, Ifeoma Claris

2017-01-01

The study examined the state of health and safety risk management practices in the building sector of the construction industry with the objective to examine the health and safety risk management processes adopted by the construction industry in Nigeria; the study adopted the survey and case study research design. It employed the use of Delphi’s technique in the distribution of questionnaire and made use of chi-square analytical technique for the analysis of gathered data. The findings reveal...

Managing nuclear safety at Point Lepreau

Energy Technology Data Exchange (ETDEWEB)

Paciga, J [New Brunswick Power, Point Lepreau NGS, PQ (Canada)

1997-12-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance).

Managing nuclear safety at Point Lepreau

International Nuclear Information System (INIS)

Paciga, J.

1997-01-01

Managing nuclear safety at Point Lepreau nuclear power plant is described, including technical issues (station aging, definition of the safe operating envelope, design configuration management, code validation, safety analysis and engineering standards); regulatory issues (action items, probabilistic safety assessment, event investigation, periodic safety review, prioritization of regulatory issues, cost benefit assessment); human performance issues (goals and measures, expectations and accountability, supervisory training, safety culture, configuration management, quality of operations and maintenance)

[Patient safety culture in directors and managers of a health service].

Science.gov (United States)

Giménez-Júlvez, Teresa; Hernández-García, Ignacio; Aibar-Remón, Carlos; Gutiérrez-Cía, Isabel; Febrel-Bordejé, Mercedes

To assess patient safety culture in directors/managers. Cross-sectional descriptive study carried out from February to June 2011 among the executive/managing staff of the Aragón Health Service through semi-structured interviews. A total of 12 interviews were carried out. All the respondents admitted that there were many patient safety problems and agreed that patient safety was a priority from a theoretical rather than practical perspective. The excessive changes in executive positions was considered to be an important barrier which made it difficult to establish long-term strategies and achieve medium-term continuity. This study recorded perceptions on patient safety culture in directors, an essential factor to improve patient safety culture in this group and in the organisations they run. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Food Safety Practices Linked with Proper Refrigerator Temperatures in Retail Delis.

Science.gov (United States)

Brown, Laura G; Hoover, Edward Rickamer; Faw, Brenda V; Hedeen, Nicole K; Nicholas, David; Wong, Melissa R; Shepherd, Craig; Gallagher, Daniel L; Kause, Janell R

2018-05-01

Listeria monocytogenes (L. monocytogenes) causes the third highest number of foodborne illness deaths annually. L. monocytogenes contamination of sliced deli meats at the retail level is a significant contributing factor to L. monocytogenes illness. The Centers for Disease Control and Prevention's Environmental Health Specialists Network (EHS-Net) conducted a study to learn more about retail delis' practices concerning L. monocytogenes growth and cross-contamination prevention. This article presents data from this study on the frequency with which retail deli refrigerator temperatures exceed 41°F, the Food and Drug Administration (FDA)-recommended maximum temperature for ready-to-eat food requiring time and temperature control for safety (TCS) (such as retail deli meat). This provision was designed to control bacterial growth in TCS foods. This article also presents data on deli and staff characteristics related to the frequency with which retail delis refrigerator temperatures exceed 41°F. Data from observations of 445 refrigerators in 245 delis showed that in 17.1% of delis, at least one refrigerator was >41°F. We also found that refrigeration temperatures reported in this study were lower than those reported in a related 2007 study. Delis with more than one refrigerator, that lacked refrigerator temperature recording, and had a manager who had never been food safety certified had greater odds of having a refrigerator temperature >41°F. The data from this study suggest that retail temperature control is improving over time. They also identify a food safety gap: some delis have refrigerator temperatures that exceed 41°F. We also found that two food safety interventions were related to better refrigerated storage practices: kitchen manager certification and recording refrigerated storage temperatures. Regulatory food safety programs and the retail industry may wish to consider encouraging or requiring kitchen manager certification and recording refrigerated

Fluor Hanford Integrated Safety Management System Phase II Verification Vol 1 and Vol 2

CERN Document Server

Parsons, J E

2000-01-01

The U.S. Department of Energy (DOE) is committed to conducting work efficiently and in a manner that ensures protection of the workers, public, and environment. DOE policy mandates that safety management systems be used to systematically integrate safety into management and work practices at all levels while accomplishing mission goals in an effective and efficient manner. The purpose of the Fluor Hanford (FH) Integrated Safety Management System (ISMS) verification was to determine whether FH's ISM system and processes are sufficiently implemented to accomplish the goal of ''Do work safely.'' The purpose of the DOE, Richland Operations Office (RL) verification was to determine whether RL has established processes that adequately describe RL's role in safety management and if those processes are sufficiently implemented.

Fluor Hanford Integrated Safety Management System Phase II Verification Vol 1 and Vol 2

International Nuclear Information System (INIS)

PARSONS, J.E.

2000-01-01

The U.S. Department of Energy (DOE) is committed to conducting work efficiently and in a manner that ensures protection of the workers, public, and environment. DOE policy mandates that safety management systems be used to systematically integrate safety into management and work practices at all levels while accomplishing mission goals in an effective and efficient manner. The purpose of the Fluor Hanford (FH) Integrated Safety Management System (ISMS) verification was to determine whether FH's ISM system and processes are sufficiently implemented to accomplish the goal of ''Do work safely.'' The purpose of the DOE, Richland Operations Office (RL) verification was to determine whether RL has established processes that adequately describe RL's role in safety management and if those processes are sufficiently implemented

IAEA’s Approach to Leadership, Management and Culture for Safety

International Nuclear Information System (INIS)

Rzentkowski, G.

2016-01-01

In this session the director of the Division of Nuclear Installation Safety (NSNI) will describe the division’s approach to leadership, management and culture for safety and outline the strategy adopted for this work. The IAEA has developed a safety culture foundation framework which is used to support all installations’ and organisations’ work for continuous improvement to achieve excellence in nuclear safety performance. The framework has been developing since 1986 through the work of the IAEA and the nuclear community, and is based on nuclear organisations’ experiences (both in practices applied and events experienced) and the development of scientific knowledge on human and organisation factors that support nuclear safety performance. The main aim for the IAEA is to assist the Member States to translate the knowledge into practical and successful practise, and to further enhance the safety on nuclear installations. The Strategy of the division is to share the common foundation of the framework across the different nuclear sectors and ensure that application of improvement activities are firmly based on knowledge and appropriate context based solutions.

OSART mission highlights 2001-2003. Operational safety practices in nuclear power plants

International Nuclear Information System (INIS)

2005-05-01

; Part III lists the good practices that were identified in the period covered. At the end of Part III is a summary of the good practices that were observed in the different review areas and of the contributions of individual NPPs to good practices for the period covered. Each part of the report is intended for different levels of management in the operating and regulatory organizations, but not exclusively so. Part I is primarily directed at the executive management level; Part II at middle managers and Part III at those involved in operational experience feedback. Individual findings varied considerably in scope and significance. However, the findings do reflect some common strengths and opportunities for improvement. Appendix I presents information on the database which collects the results of OSART missions (OSMIR), which can be valuable for user programmes that deal with operational experience feedback. Appendix II reviews the IAEA programme on education and training in nuclear safety. Appendix III covers the IAEA programme on education and training in radiation protection, transport and waste safety. Finally, Appendix IV presents the IAEA programme on ageing and long term operation which aim to increase the qualification of NPP specialists in different areas of nuclear and radiation safety and needs for long term operation

Tianwan nuclear power plant operation and management practices

International Nuclear Information System (INIS)

Gu Yingbing

2010-01-01

Tianwan Nuclear Power Station is a high-tech cooperation project in nuclear sector in the spirit of promoting the political relationship, economic trading and international strategic partnership between China and Russia. It was listed as one of the key nuclear projects to be constructed during the 'Ninth Five-Year' Plan. In this article the author summarizes and feedbacks the practices of operation management in Tianwan Nuclear Power Station in 7 aspects of safety culture construction, operation team building, daily operation management, operation document management, plant chemistry control and management, solid, liquid and gaseous waste management and control of operation performance indicators. (author)

Contractor’s Awareness on Occupational Safety and Health (OSH Management Systems in Construction Industry

Directory of Open Access Journals (Sweden)

Mohd Kamar I.F.

2014-01-01

Full Text Available Occupational Health and Safety Management Systems is part of the overall management system that facilitates the management of the OS&H risks associated with the business of the organization. This includes the organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining the organization’s OS&H policy. The purpose of this research is to determine the level of awareness of contractors on OSH management systems. A total of 34 numbers of class A contractors in Kelantan registered with Pusat Khidmat Kontraktor (PKK were randomly selected. Data was collected using self-administered questionnaire. The findings indicate that most of the Class A Contractor in Kelantan aware that the occupational safety and health management system are important and should be practiced to achieve zero accident and death on site

[The institutional promotion of good practices in the operational management of health and safety: the experience of Italy Crown Aerosols on the monitoring of behavior].

Science.gov (United States)

de Merich, D; Pellicci, M; Serignoli, R

2010-01-01

Within the intelligence support and training to small and medium-sized enterprises (SMEs) and promoting a culture of health and safety at work, ISPESL is engaged on two fundamental pillars of activity: Consolidation of the national surveillance system of injuries through the promotion of methods and tools for the reconstruction of the dynamics incidental identification of causal determinants, with the aim of improving the capabilities of risk assessment of systems to prevent corporate. The promotion of good working practices, as Focal Point of the European Health and Safety at Work in Bilbao, the goal is to support prevention activities by providing business application examples of measures for improvement (technical, organizational, procedural) made in the proposing firms and validated by a technical appraisal conducted by ISPESL. Among the methodologies and tools that can be made available to companies in the operational management of health and safety in work activities, the approach to analyze and evaluate the behavior implemented by all persons within the company (managers, employees, workers) is a the most innovative preventive strategies that can be implemented to correct any improper practices behavioral wrongly tolerated in everyday work practice. The experience of Crown Aerosol Italy, the program "STOP TO ACCIDENTS, 2009 Best Practices award in the competition on the theme" Risk Assessment ", aims to demonstrate how the application of a method for monitoring behavior at work, shared in its planning with all those business, has not only reached but would assist the organization has developed at an individual level greater awareness and sense of responsibility also to their colleagues, by promoting good working practices.

Contracting for safety with patients: clinical practice and forensic implications.

Science.gov (United States)

Garvey, Keelin A; Penn, Joseph V; Campbell, Angela L; Esposito-Smythers, Christianne; Spirito, Anthony

2009-01-01

The contract for safety is a procedure used in the management of suicidal patients and has significant patient care, risk management, and medicolegal implications. We conducted a literature review to assess empirical support for this procedure and reviewed legal cases in which this practice was employed, to examine its effect on outcome. Studies obtained from a PubMed search were reviewed and consisted mainly of opinion-based surveys of clinicians and patients and retrospective reviews. Overall, empirically based evidence to support the use of the contract for safety in any population is very limited, particularly in adolescent populations. A legal review revealed that contracting for safety is never enough to protect against legal liability and may lead to adverse consequences for the clinician and the patient. Contracts should be considered for use only in patients who are deemed capable of giving informed consent and, even in these circumstances, should be used with caution. A contract should never replace a thorough assessment of a patient's suicide risk factors. Further empirical research is needed to determine whether contracting for safety merits consideration as a future component of the suicide risk assessment.

Practice management.

Science.gov (United States)

Althausen, Peter L; Mead, Lisa

2014-07-01

The practicing orthopaedic traumatologist must have a sound knowledge of business fundamentals to be successful in the changing healthcare environment. Practice management encompasses multiple topics including governance, the financial aspects of billing and coding, physician extender management, ancillary service development, information technology, transcription utilization, and marketing. Some of these are universal, but several of these areas may be most applicable to the private practice of medicine. Attention to each component is vital to develop an understanding of the intricacies of practice management.

Managing for safety at nuclear installations

International Nuclear Information System (INIS)

1996-01-01

This publication, by the Health and Safety Executive's (HSE's) Nuclear Safety Division (NSD), provides a statement of the criteria the Nuclear Installations Inspectorate (NII) uses to judge the adequacy of any proposed or existing system for managing a nuclear installation in so far as it affects safety. These criteria have been developed from the basic HSE model, described in the publication Successful health and safety management that applies to industry generally, in order to meet the additional needs for managing nuclear safety. In addition, the publication identifies earlier studies upon which this work was based together with the key management activities and outputs. (Author)

Environment, Safety, Health and Waste Management Plan

International Nuclear Information System (INIS)

1988-01-01

The mission of the Feed Materials Production Center (FMPC) is the production of high qaulity uranium metal for use by the US Department of Energy (DOE) in Defense Programs. In order to accomplish this mission and to maintain the FMPC as a viable facility in the DOE production complex, the facility must be brought into full compliance with all federal and state regulations and industry standards for environmental protection and worker safety. Where past practices have resulted in environmental insult, a comprehensive program of remediation must be implemented. The purpose of this combined Environment, Safety, Health and Waste Management Plan is to provide a road map for achieving needed improvements. The plan is structured to provide a comprehensive projection from the current fiscal year (FY) through FY 1994 of the programs, projects and funding required to achieve compliance. To do this, the plan is subdivided into chapters which discuss the applicable regulations;project schedules and funding requirements;details of the various programs for environment, safety, health and waste management;details of the ongoing National Environmental Policy Act (NEPA);the quality assurance program and the environmental monitoring program. 14 refs., 30 figs., 29 tabs

Food safety practices among Norwegian consumers.

Science.gov (United States)

Røssvoll, Elin Halbach; Lavik, Randi; Ueland, Øydis; Jacobsen, Eivind; Hagtvedt, Therese; Langsrud, Solveig

2013-11-01

An informed consumer can compensate for several potential food safety violations or contaminations that may occur earlier in the food production chain. However, a consumer can also destroy the work of others in the chain by poor food handling practices, e.g., by storing chilled ready-to-eat foods at abusive temperatures. To target risk-reducing strategies, consumer groups with high-risk behavior should be identified. The aim of this study was to identify demographic characteristics associated with high-risk food handling practices among Norwegian consumers. More than 2,000 randomly selected Norwegian consumers were surveyed, and the results were analyzed with a risk-based grading system, awarding demerit points for self-reported food safety violations. The violations were categorized into groups, and an ordinary multiple linear regression analysis was run on the summarized demerit score for each group and for the entire survey group as a whole. Young and elderly men were identified as the least informed consumer groups with the most unsafe practices regarding food safety. Single persons reported poorer practices than those in a relationship. People with higher education reported poorer practices than those with lower or no education, and those living in the capital of Norway (Oslo) reported following more unsafe food practices than people living elsewhere in Norway. Men reported poorer food safety practices than women in all categories with two exceptions: parboiling raw vegetables before consumption and knowledge of refrigerator temperature. These findings suggest that risk-reducing measures should target men, and a strategy is needed to change their behavior and attitudes.

Practical Solutions for Pesticide Safety: A Farm and Research Team Participatory Model.

Science.gov (United States)

Galvin, Kit; Krenz, Jen; Harrington, Marcy; Palmández, Pablo; Fenske, Richard A

2016-01-01

Development of the Practical Solutions for Pesticide Safety guide used participatory research strategies to identify and evaluate solutions that reduce pesticide exposures for workers and their families and to disseminate these solutions. Project principles were (1) workplace chemicals belong in the workplace, and (2) pesticide handlers and farm managers are experts, with direct knowledge of production practices. The project's participatory methods were grounded in self-determination theory. Practical solutions were identified and evaluated based on five criteria: practicality, adaptability, health and safety, novelty, and regulatory compliance. Research activities that had more personal contact provided better outcomes. The Expert Working Group, composed of farm managers and pesticide handlers, was key to the identification of solutions, as were farm site visits. Audience participation, hands-on testing, and orchard field trials were particularly effective in the evaluation of potential solutions. Small work groups in a Regional Advisory Committee provided the best direction and guidance for a "user-friendly" translational document that provided evidence-based practical solutions. The "farmer to farmer" format of the guide was endorsed by both the Expert Working Group and the Regional Advisory Committee. Managers and pesticide handlers wanted to share their solutions in order to "help others stay safe," and they appreciated attribution in the guide. The guide is now being used in educational programs across the region. The fundamental concept that farmers and farmworkers are innovators and experts in agricultural production was affirmed by this study. The success of this process demonstrates the value of participatory industrial hygiene in agriculture.

Effective Safety Management in Construction Project

Science.gov (United States)

Othman, I.; Shafiq, Nasir; Nuruddin, M. F.

2017-12-01

Effective safety management is one of the serious problems in the construction industry worldwide, especially in large-scale construction projects. There have been significant reductions in the number and the rate of injury over the last 20 years. Nevertheless, construction remains as one of the high risk industry. The purpose of this study is to examine safety management in the Malaysian construction industry, as well as to highlight the importance of construction safety management. The industry has contributed significantly to the economic growth of the country. However, when construction safety management is not implemented systematically, accidents will happen and this can affect the economic growth of the country. This study put the safety management in construction project as one of the important elements to project performance and success. The study emphasize on awareness and the factors that lead to the safety cases in construction project.

Radiation safety requirements for radioactive waste management in the framework of a quality management system

International Nuclear Information System (INIS)

Salgado, M.M.; Benitez, J.C.; Pernas, R.; Gonzalez, N.

2007-01-01

The Center for Radiation Protection and Hygiene (CPHR) is the institution responsible for the management of radioactive wastes generated from nuclear applications in medicine, industry and research in Cuba. Radioactive Waste Management Service is provided at a national level and it includes the collection and transportation of radioactive wastes to the Centralized Waste Management Facilities, where they are characterized, segregated, treated, conditioned and stored. A Quality Management System, according to the ISO 9001 Standard has been implemented for the RWM Service at CPHR. The Management System includes the radiation safety requirements established for RWM in national regulations and in the Licence's conditions. The role of the Regulatory Body and the Radiation Protection Officer in the Quality Management System, the authorization of practices, training and personal qualification, record keeping, inspections of the Regulatory Body and internal inspection of the Radiation Protection Officer, among other aspects, are described in this paper. The Quality Management System has shown to be an efficient tool to demonstrate that adequate measures are in place to ensure the safety in radioactive waste management activities and their continual improvement. (authors)

[Qualitative evaluation of employer requirements associated with occupational health and safety as good practice in small-scale enterprises].

Science.gov (United States)

Kuroki, Naomi; Miyashita, Nana; Hino, Yoshiyuki; Kayashima, Kotaro; Fujino, Yoshihisa; Takada, Mikio; Nagata, Tomohisa; Yamataki, Hajime; Sakuragi, Sonoko; Kan, Hirohiko; Morita, Tetsuya; Ito, Akiyoshi; Mori, Koji

2009-09-01

The purpose of this study was to identify what motivates employers to promote good occupational health and safety practices in small-scale enterprises. Previous studies have shown that small-scale enterprises generally pay insufficient attention to issues of occupational health and safety. These findings were mainly derived from questionnaire based surveys. Nevertheless, some small-scale enterprises in which employers exercise good leadership do take a progressive approach to occupational health and safety. Although good practices can be identified in small-scale enterprises, it remains unclear what motivates employers in small-scale enterprises to actively implement occupational health and safety practices. We speculated that identifying employer motivations in promoting occupational health would help to spread good practices among small-scale enterprises. Using a qualitative approach based on the KJ methods, we interviewed ten employers who actively promote occupational health and safety in the workplace. The employers were asked to discuss their views of occupational health and safety in their own words. A semi-structured interview format was used, and transcripts were made of the interviews. Each transcript was independently coded by two or more researchers. These transcripts and codes were integrated and then the research group members discussed the heading titles and structural relationships between them according to the KJ method. Qualitative analysis revealed that all the employers expressed a strong interest in a "good company" and "good management". They emphasized four elements of "good management", namely "securing human resources", "trust of business partners", "social responsibility" and "employer's health condition itself", and considered that addressing occupational health and safety was essential to the achievement of these four elements. Consistent with previous findings, the results showed that implementation of occupational health and safety

Quality management and perceptions of teamwork and safety climate in European hospitals.

Science.gov (United States)

Kristensen, Solvejg; Hammer, Antje; Bartels, Paul; Suñol, Rosa; Groene, Oliver; Thompson, Caroline A; Arah, Onyebuchi A; Kutaj-Wasikowska, Halina; Michel, Philippe; Wagner, Cordula

2015-12-01

This study aimed to investigate the associations of quality management systems with teamwork and safety climate, and to describe and compare differences in perceptions of teamwork climate and safety climate among clinical leaders and frontline clinicians. We used a multi-method, cross-sectional approach to collect survey data of quality management systems and perceived teamwork and safety climate. Our data analyses included descriptive and multilevel regression methods. Data on implementation of quality management system from seven European countries were evaluated including patient safety culture surveys from 3622 clinical leaders and 4903 frontline clinicians. Perceived teamwork and safety climate. Teamwork climate was reported as positive by 67% of clinical leaders and 43% of frontline clinicians. Safety climate was perceived as positive by 54% of clinical leaders and 32% of frontline clinicians. We found positive associations between implementation of quality management systems and teamwork and safety climate. Our findings, which should be placed in a broader clinical quality improvement context, point to the importance of quality management systems as a supportive structural feature for promoting teamwork and safety climate. To gain a deeper understanding of this association, further qualitative and quantitative studies using longitudinally collected data are recommended. The study also confirms that more clinical leaders than frontline clinicians have a positive perception of teamwork and safety climate. Such differences should be accounted for in daily clinical practice and when tailoring initiatives to improve teamwork and safety climate. © The Author 2015. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

Performance standards of road safety management

Directory of Open Access Journals (Sweden)

Čabarkapa Milenko R.

2016-01-01

Full Text Available Road safety management controlling means the process of finding out the information whether the road safety is improving in a measure to achieve the objectives. The process of control consists of three basic elements: definition of performances and standards, measurement of current performances and comparison with the set standards, and improvement of current performances, if they deviate from the set standards. The performance standards of road safety management system are focused on a performances measurement, in terms of their design and characteristics, in order to support the performances improvement of road safety system and thus, ultimately, improve the road safety. Defining the performance standards of road safety management system, except that determines the design of the system for performances measurement, directly sets requirements whose fulfillment will produce a road safety improvement. The road safety management system, based on the performance standards of road safety, with a focus on results, will produce the continuous improvement of road safety, achieving the long-term 'vision zero', the philosophy of road safety, that human life and health take priority over mobility and other traffic objectives of the road traffic.

Effectiveness of a quality-improvement program in improving management of primary care practices

Science.gov (United States)

Szecsenyi, Joachim; Campbell, Stephen; Broge, Bjoern; Laux, Gunter; Willms, Sara; Wensing, Michel; Goetz, Katja

2011-01-01

Background: The European Practice Assessment program provides feedback and outreach visits to primary care practices to facilitate quality improvement in five domains (infrastructure, people, information, finance, and quality and safety). We examined the effectiveness of this program in improving management in primary care practices in Germany, with a focus on the domain of quality and safety. Methods: In a before–after study, 102 primary care practices completed a practice assessment using the European Practice Assessment instrument at baseline and three years later (intervention group). A comparative group of 102 practices was included that completed their first assessment using this instrument at the time of the intervention group’s second assessment. Mean scores were based on the proportion of indicators for which a positive response was achieved by all of the practices, on a scale of 0 to 100. Results: We found significant improvements in all domains between the first and second assessments in the intervention group. In the domain of quality and safety, improvements in scores (mean scores were based on the proportion of indicators for which a positive response was achieved by all of the practices, on a scale of 0 to 100) were observed in the following dimensions: complaint management (from a mean score of 51.2 at first assessment to 80.7 at second assessment); analysis of critical incidents (from 79.1 to 89.6); and quality development, quality policy (from 40.7 to 55.6). Overall scores at the time of the second assessment were significantly higher in the intervention group than in the comparative group. Interpretation: Primary care practices that completed the European Practice Assessment instrument twice over a three-year period showed improvements in practice management. Our findings show the value of the quality-improvement cycle in the context of practice assessment and the use of established organizational standards for practice management with the

Key Element Performance In Occupational Safety And Health Management System In Organization (A Literature

Directory of Open Access Journals (Sweden)

Agus Salim Nuzaihan Aras

2016-01-01

Full Text Available Setting an effective safety and health management system is crucial in order to reduce problem relating to accident and ill in management organizational. It is involve with multiple level of management and stakeholders who empower the organization to the management in handling the safety and health cases and issues in organizational. It is necessary to prepare a well knowledge about safety and health management systems and preparing the framework for setting a certain scale in measuring its performance in this area. The successful or failure of management does showing the capability of the organization in delivering the responsible to management levels [1]. The problem in safe work issues and practices cause by the management commitment and involvement that create improper safety program and procedures, and this crisis keep continuing till present [2]. This paper describes about key element of safety and health management system and measuring the performance in order to get an effective management system in organization that describes the process in achieving effectiveness in management. The literature review will be conducted through the data collection from research findings and defined the strong character of key element in which focusing on measuring performance. A guide on key element performance in occupational safety and health management system is specifically drawn to prepare for a future research.

State-of-the-art report on systematic approaches to safety management - Special Expert Group on Human and Organisational Factors (SEGHOF)

International Nuclear Information System (INIS)

Van den Berghe, Yves; Frischknecht, Albert; Gil, Benito; Martin, Anibal; McRobbie, Helen; Reiersen, Craig; Tasset, Daniel; Aastrand, Kaisa; Dahlgren-Persson, Kerstin; Pyy, Pekka; Mauny, Elisabeth

2006-02-01

There is a growing awareness of the significant contribution which human and organisational factors (HOF) make to nuclear safety. Within the HOF area, attention is increasingly focused on addressing management and organisational issues. This reflects an evolving recognition that the members of a nuclear licensee form part of a socio-technological system, and that their performance is influenced by the organisation and the culture within that organisation. A series of events across the nuclear industry and other sectors has reinforced the appreciation of the importance of robust safety management. Also, the management and organisation of nuclear installations is impacted by a number of current challenges such as deregulation, change in institutional ownership of the industry, contractorization and an ageing plant and workforce. It is in this context that the CSNI (Committee on Safety of Nuclear Installations) Special Experts' Group on Human and Organisational Factors (SEGHOF) was requested by the CNRA (Committee on Nuclear Regulatory Actions) to examine the role and influence of safety management in nuclear plant operations in 2000. A workshop on 'systematic approaches to safety management' was held in spring 2002 and this was followed by a survey in 2003-4 of relevant practices and developments across licensees and regulators. This report provides a brief explanation of the relationship between safety management and safety culture. It reinforces the need for nuclear licensees and regulators to take positive steps to ensure that licensees develop and sustain a robust safety management system as a part of their management systems as a whole. The report draws out the main findings of the workshop and presents the results of the survey in more detail. It seeks to identify current issues and areas warranting further consideration. The workshop explored the development of current organisational theories and their application to nuclear plant safety management. It

Study of industry safety management

International Nuclear Information System (INIS)

Park, Pil Su

1987-06-01

This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

Effects of organizational safety practices and perceived safety climate on PPE usage, engineering controls, and adverse events involving liquid antineoplastic drugs among nurses.

Science.gov (United States)

DeJoy, David M; Smith, Todd D; Woldu, Henok; Dyal, Mari-Amanda; Steege, Andrea L; Boiano, James M

2017-07-01

Antineoplastic drugs pose risks to the healthcare workers who handle them. This fact notwithstanding, adherence to safe handling guidelines remains inconsistent and often poor. This study examined the effects of pertinent organizational safety practices and perceived safety climate on the use of personal protective equipment, engineering controls, and adverse events (spill/leak or skin contact) involving liquid antineoplastic drugs. Data for this study came from the 2011 National Institute for Occupational Safety and Health (NIOSH) Health and Safety Practices Survey of Healthcare Workers which included a sample of approximately 1,800 nurses who had administered liquid antineoplastic drugs during the past seven days. Regression modeling was used to examine predictors of personal protective equipment use, engineering controls, and adverse events involving antineoplastic drugs. Approximately 14% of nurses reported experiencing an adverse event while administering antineoplastic drugs during the previous week. Usage of recommended engineering controls and personal protective equipment was quite variable. Usage of both was better in non-profit and government settings, when workers were more familiar with safe handling guidelines, and when perceived management commitment to safety was higher. Usage was poorer in the absence of specific safety handling procedures. The odds of adverse events increased with number of antineoplastic drugs treatments and when antineoplastic drugs were administered more days of the week. The odds of such events were significantly lower when the use of engineering controls and personal protective equipment was greater and when more precautionary measures were in place. Greater levels of management commitment to safety and perceived risk were also related to lower odds of adverse events. These results point to the value of implementing a comprehensive health and safety program that utilizes available hazard controls and effectively communicates

Process management - critical safety issues with focus on risk management; Processtyrning - kritiska saekerhetsfraagor med inriktning paa riskhantering

Energy Technology Data Exchange (ETDEWEB)

Sanne, Johan M. [Linkoeping Univ. (Sweden). The Tema Inst. - Technology and Social Change

2005-12-15

Organizational changes focused on process orientation are taking place among Swedish nuclear power plants, aiming at improving the operation. The Swedish Nuclear Power Inspectorate has identified a need for increased knowledge within the area for its regulatory activities. In order to analyze what process orientation imply for nuclear power plant safety a number of questions must be asked: 1. How is safety in nuclear power production created currently? What significance does the functional organization play? 2. How can organizational forms be analysed? What consequences does quality management have for work and for the enterprise? 3. Why should nuclear power plants be process oriented? Who are the customers and what are their customer values? Which customers are expected to contribute from process orientation? 4. What can one learn from process orientation in other safety critical systems? What is the effect on those features that currently create safety? 5. Could customer values increase for one customer without decreasing for other customers? What is the relationship between economic and safety interests from an increased process orientation? The deregulation of the electricity market have caused an interest in increased economic efficiency, which is the motivation for the interest in process orientation. among other means. It is the nuclear power plants' owners and the distributors (often the same corporations) that have the strongest interest in process orientation. If the functional organization and associated practices are decomposed, the prerequisites of the risk management regime changes, perhaps deteriorating its functionality. When nuclear power operators consider the introduction of process orientation, the Nuclear Power Inspectorate should require that 1. The operators perform a risk analysis beforehand concerning the potential consequences that process orientation might convey: the analysis should contain a model specifying how safety is currently

Analysis of factors influencing safety management for metro construction in China.

Science.gov (United States)

Yu, Q Z; Ding, L Y; Zhou, C; Luo, H B

2014-07-01

With the rapid development of urbanization in China, the number and size of metro construction projects are increasing quickly. At the same time, and increasing number of accidents in metro construction make it a disturbing focus of social attention. In order to improve safety management in metro construction, an investigation of the participants' perspectives on safety factors in China metro construction has been conducted to identify the key safety factors, and their ranking consistency among the main participants, including clients, consultants, designers, contractors and supervisors. The result of factor analysis indicates that there are five key factors which influence the safety of metro construction including safety attitude, construction site safety, government supervision, market restrictions and task unpredictability. In addition, ANOVA and Spearman rank correlation coefficients were performed to test the consistency of the means rating and the ranking of safety factors. The results indicated that the main participants have significant disagreement about the importance of safety factors on more than half of the items. Suggestions and recommendations on practical countermeasures to improve metro construction safety management in China are proposed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Core management and fuel handling for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

This Safety Guide supplements and elaborates upon the safety requirements for core management and fuel handling that are presented in Section 5 of the Safety Requirements publication on the operation of nuclear power plants. The present publication supersedes the IAEA Safety Guide on Safety Aspects of Core Management and Fuel Handling, issued in 1985 as Safety Series No. 50-SG-010. It is also related to the Safety Guide on the Operating Organization for Nuclear Power Plants, which identifies fuel management as one of the various functions to be performed by the operating organization. The purpose of this Safety Guide is to provide recommendations for core management and fuel handling at nuclear power plants on the basis of current international good practice. The present Safety Guide addresses those aspects of fuel management activities that are necessary in order to allow optimum reactor core operation without compromising the limits imposed by the design safety considerations relating to the nuclear fuel and the plant as a whole. In this publication, 'core management' refers to those activities that are associated with fuel management in the core and reactivity control, and 'fuel handling' refers to the movement, storage and control of fresh and irradiated fuel. Fuel management comprises both core management and fuel handling. This Safety Guide deals with fuel management for all types of land based stationary thermal neutron power plants. It describes the safety objectives of core management, the tasks that have to be accomplished to meet these objectives and the activities undertaken to perform those tasks. It also deals with the receipt of fresh fuel, storage and handling of fuel and other core components, the loading and unloading of fuel and core components, and the insertion and removal of other reactor materials. In addition, it deals with loading a transport container with irradiated fuel and its preparation for transport off the site. Transport

Safety management - policy, analysis and implementation

International Nuclear Information System (INIS)

Allen, F.R.

1993-01-01

The nuclear industry is moving towards a period of ever increasing emphasis on business performance and profitability. Safety has, of course, always been a major concern of management in the nuclear industry and elsewhere. The civil aviation industry , for example, has had a similar concern for safety. Other industry sectors are also developing safety management as a response to events within and outside their sectors. In this paper the way that the risk management process as a whole is being addressed is looked at. Can we use risk management, initially a safety-orientated tool, to improve business performance? (author)

What are occupational safety and health management systems and why do companies implement them?

NARCIS (Netherlands)

Zwetsloot, G.I.J.M.

2014-01-01

In company practice and in governmental legislation, it is increasingly acknowledged that occupational safety and health (OSH) management should be performed systematically and continually. Implementing an OSH Management System (OSH MS) is the major strategy to achieve this.

Road Infrastructure Safety Management in Poland

Science.gov (United States)

Budzynski, Marcin; Jamroz, Kazimierz; Kustra, Wojciech; Michalski, Lech; Gaca, Stanislaw

2017-10-01

The objective of road safety infrastructure management is to ensure that when roads are planned, designed, built and used road risks can be identified, assessed and mitigated. Road transport safety is significantly less developed than that of rail, water and air transport. The average individual risk of being a fatality in relation to the distance covered is thirty times higher in road transport that in the other modes. This is mainly because the different modes have a different approach to safety management and to the use of risk management methods and tools. In recent years Poland has had one of the European Union’s highest road death numbers. In 2016 there were 3026 fatalities on Polish roads with 40,766 injuries. Protecting road users from the risk of injury and death should be given top priority. While Poland’s national and regional road safety programmes address this problem and are instrumental in systematically reducing the number of casualties, the effects are far from the expectations. Modern approaches to safety focus on three integrated elements: infrastructure measures, safety management and safety culture. Due to its complexity, the process of road safety management requires modern tools to help with identifying road user risks, assess and evaluate the safety of road infrastructure and select effective measures to improve road safety. One possible tool for tackling this problem is the risk-based method for road infrastructure safety management. European Union Directive 2008/96/EC regulates and proposes a list of tools for managing road infrastructure safety. Road safety tools look at two criteria: the life cycle of a road structure and the process of risk management. Risk can be minimized through the application of the proposed interventions during design process as reasonable. The proposed methods of risk management bring together two stages: risk assessment and risk response occurring within the analyzed road structure (road network, road

Safety-barrier diagrams as a safety management tool

DEFF Research Database (Denmark)

Duijm, Nijs Jan

2009-01-01

Safety-barrier diagrams and “bow-tie” diagrams have become popular methods in risk analysis and safety management. This paper describes the syntax and principles for constructing consistent and valid safety-barrier diagrams. The latter's relation to other methods such as fault trees and Bayesian...

Improving ICU risk management and patient safety.

Science.gov (United States)

Kielty, Lucy Ann

2017-06-12

Purpose The purpose of this paper is to describe a study which aimed to develop and validate an assessment method for the International Electrotechnical Commission (IEC) 80001-1 (IEC, 2010) standard (the Standard); raise awareness; improve medical IT-network project risk management processes; and improve intensive care unit patient safety. Design/methodology/approach An assessment method was developed and piloted. A healthcare IT-network project assessment was undertaken using a semi-structured group interview with risk management stakeholders. Participants provided feedback via a questionnaire. Descriptive statistics and thematic analysis was undertaken. Findings The assessment method was validated as fit for purpose. Participants agreed (63 per cent, n=7) that assessment questions were clear and easy to understand, and participants agreed (82 per cent, n=9) that the assessment method was appropriate. Participant's knowledge of the Standard increased and non-compliance was identified. Medical IT-network project strengths, weaknesses, opportunities and threats in the risk management processes were identified. Practical implications The study raised awareness of the Standard and enhanced risk management processes that led to improved patient safety. Study participants confirmed they would use the assessment method in future projects. Originality/value Findings add to knowledge relating to IEC 80001-1 implementation.

Exploring the use of situation awareness in behaviors and practices of health and safety leaders.

Science.gov (United States)

Willmer, D R

2017-01-01

An understanding of how health and safety management systems (HSMS) reduce worksite injuries, illnesses and fatalities may be gained in studying the behaviors of health and safety leaders. These leaders bear the accountability for identifying, understanding and managing the risks of a mining operation. More importantly, they have to transfer this knowledge of perception, recognition and response to risks in the mining environment to their workers. The leaders' efforts to build and maintain a mining operation's workforce that consistently executes safe work practices may be captured through more than just lagging indicators of health and safety performance. This exploratory study interviewed six leaders in occupations such as site-level safety supervisors, mine superintendents and/or general managers at surface and underground stone, sand and gravel and metal/nonmetal mine sites throughout the United States, with employee populations ranging from 40 to 175. In exploring leaders' perspectives on how they systematically manage health and safety, examples such as approaches to task training, handling near-miss incidents, identifying future leaders and providing workers with feedback offer insights into how leaders translate their knowledge and management of site-level risks to others.

The role of health and safety experts in the management of hazardous and toxic wastes in Indonesia

Science.gov (United States)

Supriyadi; Hadiyanto

2018-02-01

Occupational Safety and Health Experts in Indonesia have an important role in integrating environmental health and safety factors, including in this regard as human resources assigned to undertake hazardous waste management. Comprehensive knowledge and competence skills need to be carried out responsibly, as an inherent professional occupational safety and health profession. Management leaders should continue to provide training in external agencies responsible for science in the management of toxic waste to enable occupational safety and health experts to improve their performance in the hierarchy of control over the presence of hazardous materials. This paper provides an overview of what strategies and competencies the Occupational Safety and Health expert needs to have in embracing hazardous waste management practices.

Barriers to occupational health and safety management in small Brazilian enterprises

Directory of Open Access Journals (Sweden)

Guilherme Besse Garnica

2018-02-01

Full Text Available Abstract Paper aims To determine main barriers to the implementation of occupational health and safety management systems OHSMS in the context of small Brazilian enterprises from the perspectives of owners/managers, labor auditors, and OHS consultants. Originality: Survey with three different perspectives on small Brazilian enterprises. Research method: Survey conducted with stakeholders who influence the safety culture in small enterprises to identify the main barriers to the implementation of OHSMS. Main findings: Owners/managers tend to blame employees and the government for difficulty in implementing OHSMS, and external actors tend to blame management and resource allocation. Opinions converge on inappropriate management behavior, ineffective information and communication and production prioritization. Implications for theory and practice: These barriers should be overcome not only to facilitate the implementation of OHSMS but also to improve the conditions for the management of all small business operations.

A culture of safety: a business strategy for medical practices.

Science.gov (United States)

Saxton, James W; Finkelstein, Maggie M; Marles, Adam F

2012-01-01

Physician practices can enhance their economics by taking patient safety to a new level within their practices. Patient safety has a lot to do with systems and processes that occur not only at the hospital but also within a physician's practice. Historically, patient safety measures have been hospital-focused and -driven, largely due to available resources; however, physician practices can impact patient safety, efficiently and effectively, with a methodical plan involving assessment, prioritization, and compliance. With the ever-increasing focus of reimbursement on quality and patient safety, physician practices that implement a true culture of safety now could see future economic benefits using this business strategy.

Safety assessment for Area 5 radioactive-waste-management site

International Nuclear Information System (INIS)

Hunter, P.H.; Card, D.H.; Horton, K.

1982-09-01

The Area 5 Radioactive Waste Management Safety Assessment Document contains evaluations of site characteristics, facilities, and operating practices that contribute to the safe handling, storage, and disposal of low-level radioactive wastes at the Nevada Test Site. Physical geography, cultural factors, climate and meteorology, geology, hydrology (with emphasis on radionuclide migration), ecology, natural phenomena, and natural resources are discussed and determined to be suitable for effective containment of radionuclides. A separate section considers facilities and operating practices such as monitoring, storage/disposal criteria, site maintenance, equipment, and support. The section also considers the transportation and waste handling requirements supporting the new Greater Confinement Disposal Facility (GCDF), GCDF demonstration project, and other requirements for the safe handling, storage, and disposal of low-level radioactive wastes. Finally, the document provides an analysis of releases and an assessment of the near-term operational impacts and dose commitments to operating personnel and the general public from normal operations and anticipated accidental occurrences. The conclusion of this report is that the Area 5 Radioactive Waste Management Site is suitable for low-level radioactive waste handling, storage, and disposal. Also, the new GCDF demonstration project will not affect the overall safety of the Area 5 Radioactive Waste Management Site

Investigation on regulatory requirements for radiation safety management

International Nuclear Information System (INIS)

Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

2013-01-01

NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

Regulatory Practices on Ageing Management and Long Term Operation of Nuclear Power Plants in the Ibero-American Region. Results of the FORO/IAEA Programme on Nuclear and Radiation Safety in Ibero-America

International Nuclear Information System (INIS)

2014-09-01

Although the operating lifetime of a nuclear power plant was originally anticipated to be in the range of 30-40 years, 200 of the 434 currently in operation are over 30 years old. In this context, Member States have assigned high priority to continuing the operation of nuclear power plants beyond the lifetime initially planned - while also maintaining the highest safety conditions possible. It is thus essential to encourage international cooperative efforts in the development of safety regulatory practices on ageing management and long term operation. Established in 1997, the Ibero-American Forum of Radiological and Nuclear Regulatory Agencies (FORO) aims to strengthen its members' radiological and nuclear safety regulatory organizations. Through a regional network of radiological and nuclear safety regulators, States in the Ibero-American region have worked together to strengthen radiation protection for patients, to improve safety at radiation installations, to tightten controls on radioactive sources used in medicine, agriculture and industry, and to improve safety and security at nuclear power plants. Since FORO's creation, it has cooperated with the IAEA in areas of mututal interest, and a technical programme administered by the IAEA was established in 2003 and formalized in Practical Arrangements signed in 2010. This publication presents the results of the 2009-2010 FORO/IAEA project on regulatory practices on ageing management and safety considerations for extending the operating lifetime of nuclear power plants. The purpose of the project was to provide nuclear regulators in the region with guidance on regulatory criteria, assessment, regulatory inspection and periodic safety reviews relating to ageing management and long term operation of nuclear power plants. The results are presented in a set of four reports, with guidelines for FORO members and a summary report of the project. These reports contain valuable information for the development of future

Increase of Technogenic Safety of a Waste Management Company

Directory of Open Access Journals (Sweden)

Cudečka-Puriņa Natālija

2017-11-01

Full Text Available Waste management is often recognised in the society as an activity sector possessing an extensive potential harm on technogenic safety. As most of the European Union countries have experienced at least theoretical shift from waste management to resource management, it is now extremely important to implement this shift in practice, moving from disposing waste or by-products to developing a cooperation network that allows different industries to use each other’s waste as resources. This shift will lead to saving of primary resources and raw materials and develop recycling and reuse, bringing them to a higher level.

American National Standard administrative practices for nuclear criticality safety, ANSI/ANS-8.19

International Nuclear Information System (INIS)

Smith, D.R.; Carson, R.W.

1991-01-01

American National Standard Administrative Practices for Nuclear Criticality Safety, ANSI/ANS-8.19, provides guidance for the administration of an effective program to control the risk of nuclear criticality in operations with fissile material outside reactors. The several sections of the standard address the responsibilities of management, supervisory personnel, and the criticality safety staff, as well as requirements and suggestions for the content of operating procedures, process evaluations, material control procedures, and emergency procedures

The effect of production system and management practices on the ...

African Journals Online (AJOL)

The effect of production system and management practices on the environmental impact, quality and safety of milk and dairy products. ... that are important during the production of processed dairy foods such as cheese or yoghurt. There is no ...

Management of safety and risk at the HFIR [High-Flux Isotope Reactor

International Nuclear Information System (INIS)

Glovier, H.A.

1990-01-01

This paper discusses the management of safety and risk at the High-Flux Isotope Reactor (HFIR), a category A research reactor at Oak Ridge National Laboratory (ORNL). The HFIR went critical in 1966 and operated at its designed 100 MW for 20 yr until it was shut down on November 14, 1986. It operated at a >90% availability and without significant event during this period. The result was a complacent management program lacking rigor. This complacency came to an end with the Chernobyl accident, which led to the appointment of an internal committee to assess the safety of ORNL reactor operations. This committee found that HFIR pressure vessel material specimens removed several years earlier had not been analyzed. This issue led to a general review of management practices that were found lacking in quality assurance, safety documentation, training process, and emergency planning, among others. Management accountability was lacking, as shown by design basis and safety analyses that were not up to data and by the fact that reactor operators whose requalification examinations had not been graded were allowed to continue operating the reactor over a long period of time. Between shutdown in 1986 and restart in April 1989, significant management changes and initiatives were made in the area of risk and safety management of ORNL reactors. These are presented briefly in this paper

Roy's safety-first portfolio principle in financial risk management of disastrous events.

Science.gov (United States)

Chiu, Mei Choi; Wong, Hoi Ying; Li, Duan

2012-11-01

Roy pioneers the concept and practice of risk management of disastrous events via his safety-first principle for portfolio selection. More specifically, his safety-first principle advocates an optimal portfolio strategy generated from minimizing the disaster probability, while subject to the budget constraint and the mean constraint that the expected final wealth is not less than a preselected disaster level. This article studies the dynamic safety-first principle in continuous time and its application in asset and liability management. We reveal that the distortion resulting from dropping the mean constraint, as a common practice to approximate the original Roy's setting, either leads to a trivial case or changes the problem nature completely to a target-reaching problem, which produces a highly leveraged trading strategy. Recognizing the ill-posed nature of the corresponding Lagrangian method when retaining the mean constraint, we invoke a wisdom observed from a limited funding-level regulation of pension funds and modify the original safety-first formulation accordingly by imposing an upper bound on the funding level. This model revision enables us to solve completely the safety-first asset-liability problem by a martingale approach and to derive an optimal policy that follows faithfully the spirit of the safety-first principle and demonstrates a prominent nature of fighting for the best and preventing disaster from happening. © 2012 Society for Risk Analysis.

Use of information technologies to contribute for optimizing the safety radiation management in Cuba

International Nuclear Information System (INIS)

Valdes Ramos, M.; Prendes Alonso, M.; Hernandez Saiz, A.; Manzano de Armas, J.

2013-01-01

This paper presents the results achieved in Cuba, with the development of a group of information management tools to implement radiation safety systemic and proactive approaches to safety and ICT supported. These tools were designed for different organisms with responsibility for the security at the country level, to the regulatory authority, for user entities, for individual monitoring services and other radiation protection services. It describes the philosophy of information management model used, the characteristics of the developed tools and their integration, the work performed for the homogenization of information available and the ability to capture and deliver data at different levels in decision making. The tools developed are based on the use of variables and indicators of importance to the safety and the systemic approach adopted allows to facilitate the optimization process for supervision of safety practices as well as contribute to the management of knowledge in radiation safety, through a synergistic combination of process data, information, information management systems, and the creative and innovative radiation safety experts

Time Safety Margin: Theory and Practice

Science.gov (United States)

2016-09-01

Air Education and Training Command Handbook 99-107, T-38 Road to Wings, Randolph Air Force Base, Texas, July 2013. 65 This page was intentionally left...412TW-TIH-16-01 TIME SAFETY MARGIN: THEORY AND PRACTICE WILLIAM R. GRAY, III Chief Test Pilot USAF Test Pilot School SEPTEMBER 2016... Safety Margin: The01y and Practice) was submitted by the Commander, 4 I 2th Test Wing, Edwards AFB, Ca lifornia 93524-6843. Foreign announcement and

A Study on Enhancement of Understanding of Radiation and Safety Management

Energy Technology Data Exchange (ETDEWEB)

Yoo, Dong Han; Park, Ji Young; Lee, Jae Uk; Bae, Jun Woo; Kim, Hee Reyoung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

2014-10-15

Concerns for radiation exposure have been increased from small and big radiation works or experiments with radiation generator (RG) or radiation isotopes (RI) at institutions using radiation in Korea. Actually, due to radiation exposure occurred on the process of handling RI, etc., The exposure should be maintained as low as reasonably possible. To do this, above all, suitable training and establishment of safety culture have to be preceded. In this respect, an education institution is a place where people learn first about handling radiations in various specialties with purposes including academic research, and the first learned habits and practices acts as the basis for safety management of radiation when they continue to do radiation work after going into the society. Hereford, it is needed to establish the right safety culture on radiation for its safe managing. In the present study, the direction for the right understandings and safety improvement are suggested through the radiation survey on education institutions and preparation of safety guidances for users. The basic guidance at the radiation experiment was prepared for the right understanding of the radiation to prevent radiation accidents from careless handling by workers based on the surveyed results for education institutions. It is expected to be used as fundamentals for improvement for radiation safety management of workers and researchers and, further, safety policy for national nuclear energy and radiations.

A Study on Enhancement of Understanding of Radiation and Safety Management

International Nuclear Information System (INIS)

Yoo, Dong Han; Park, Ji Young; Lee, Jae Uk; Bae, Jun Woo; Kim, Hee Reyoung

2014-01-01

Concerns for radiation exposure have been increased from small and big radiation works or experiments with radiation generator (RG) or radiation isotopes (RI) at institutions using radiation in Korea. Actually, due to radiation exposure occurred on the process of handling RI, etc., The exposure should be maintained as low as reasonably possible. To do this, above all, suitable training and establishment of safety culture have to be preceded. In this respect, an education institution is a place where people learn first about handling radiations in various specialties with purposes including academic research, and the first learned habits and practices acts as the basis for safety management of radiation when they continue to do radiation work after going into the society. Hereford, it is needed to establish the right safety culture on radiation for its safe managing. In the present study, the direction for the right understandings and safety improvement are suggested through the radiation survey on education institutions and preparation of safety guidances for users. The basic guidance at the radiation experiment was prepared for the right understanding of the radiation to prevent radiation accidents from careless handling by workers based on the surveyed results for education institutions. It is expected to be used as fundamentals for improvement for radiation safety management of workers and researchers and, further, safety policy for national nuclear energy and radiations

OSART programme highlights 1995-1996. Operational safety practices in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

The IAEA Operational Safety Review Team (OSART) programme provides advice and assistance to Member States in enhancing the operational safety of nuclear power plants. This report continues the practice of summarizing mission results so that all the aspects of OSART missions, Pre-OSART missions and good practices are to be found in one volume. It also includes results of follow-up visits. Attempts have been made in this report to highlight the most significant findings whilst retaining as much of the vital background information as possible. This report is in four parts: Part I summarizes the most significant observations made during the missions and follow-up visits during 1995-1996; Part II, in chronological order, is an overview of the major strengths and opportunities for improvement identified during each OSART mission and summaries of follow-up visits performed during the period; Part III lists good practices that were identified during 1995 and 1996; and Part IV presents the OSART mission results (OSMIR) database. Each part of the report is intended for different levels in operating and regulatory organizations but not exclusively so. Part I is primarily to the executive management level; Part II to middle managers; and Parts III and IV to those involved in operational experience feedback. Because of widely different plant designs, operating and management styles, cultural practices, and other factors affecting plant operations, no OSART findings were applicable to all of the plants visited in 1995 and 1996. Individual findings varied considerably in scope and significance. However, the findings do reflect some common strengths and opportunities for improvement

Management of construction safety at KKNPP site

International Nuclear Information System (INIS)

Khare, P.K.

2016-01-01

Construction is considered as one of the most hazardous activities owing to the number of accidents and injuries. At KKNPP, management of industrial safety has been envisaged since the preliminary stage of construction planning, including design aspects. The governing principles of safety management are evolved from the Factories Act, 1948, the Atomic Energy(Factories) Rules, 1996, AERB safety guidelines on Control of works (2011) and Corporate HSE policy of NPCIL (2014). Numerous risk assessment and hazard control measures are adopted consistently to ensure a safe work environment during the construction, which includes Job Hazard Analysis, work permit through Computerized Maintenance Management System, safety procedures, exclusive safety training facility for the contractor's workmen, safety motivational measures, safety surveillance and reporting through Safety Related Deficiencies Management System. Assessment of efficacy of safety management system is continuously done through safety audits and observations are being circulated and discussed in committee meetings. Fire safety is also being taken care of since inception of project work. Well-equipped fire station with trained fire fighters was made available since the beginning as per AERB safety standard on fire protection system for Nuclear facilities. Fire prevention measures specific to the work are implemented during all activities. (author)

Predicting safety culture: the roles of employer, operations manager and safety professional.

Science.gov (United States)

Wu, Tsung-Chih; Lin, Chia-Hung; Shiau, Sen-Yu

2010-10-01

This study explores predictive factors in safety culture. In 2008, a sample 939 employees was drawn from 22 departments of a telecoms firm in five regions in central Taiwan. The sample completed a questionnaire containing four scales: the employer safety leadership scale, the operations manager safety leadership scale, the safety professional safety leadership scale, and the safety culture scale. The sample was then randomly split into two subsamples. One subsample was used for measures development, one for the empirical study. A stepwise regression analysis found four factors with a significant impact on safety culture (R²=0.337): safety informing by operations managers; safety caring by employers; and safety coordination and safety regulation by safety professionals. Safety informing by operations managers (ß=0.213) was by far the most significant predictive factor. The findings of this study provide a framework for promoting a positive safety culture at the group level. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Road safety in practice

CERN Multimedia

2003-01-01

On the 23 and 25 September come and test your driving skills and your reflexes on the two days of road safety in practice! To conclude the poster and article campaign on this topic which started last year, CERN now comes to the practical part with demonstrations, like a spectacular overturning test, information stands, where you can meet safety personnel from France, Switzerland and CERN, and discussions & debates. Come to ... ... the Meyrin site on 23 September: - From 8:30 hrs, stands and demonstrations on the parking site Cèdres, behind the Restaurant no. 1. - From 9:30 hrs, discussions and debates in the main auditorium. ... the Prévessin site on 25 September: - From 8:30 hrs, stands and demonstrations on the parking site of the building 866. - From 14:00 hrs, discussions and debates in the AB auditorium, building 864.

A review of health and safety leadership and managerial practices on modern dairy farms.

Science.gov (United States)

Hagevoort, G Robert; Douphrate, David I; Reynolds, Stephen J

2013-01-01

As modern dairy operations around the world expand, farmers are increasingly reliant on greater automation and larger numbers of hired labor to milk cows and perform other essential farm tasks. Dairy farming is among the most dangerous occupations, with high rates of injury, illness, and employee turnover. Lower education levels, illiteracy, and limited language proficiency increase the possibility of injury or death associated with higher risk occupations such as dairy. Sustaining a healthy, productive workforce is a critical component of risk management; however, many owners and managers have not received formal training in employee management or occupational health and safety. Optimal dairy farming management should address milk production that is sustainable and responsible from the animal welfare, social, economic, and environmental perspectives. Each of these aspects is interdependent with each other and with a sustainable, healthy, productive workforce. Very few studies address the effectiveness of risk management in the dairy industry. Studies suggest that labor management practices are a potential competitive advantage for dairy farms, but the connection with efficiency, productivity, and profitability has not been clearly demonstrated. Transformational leadership has been associated with improved safety climate and reduced incidence of injury, whereas passive leadership styles have opposite effects. There is a need to develop and evaluate the effectiveness of safety-specific transformational leadership among dairy owners and managers. A systematic approach to risk management should address worker health and safety as an integral component of production, food safety, and animal welfare. A successful program must address the cultural and linguistic barriers associated with immigrant workers.

Strategies to Improve Management of Shoulder Dystocia Under the AHRQ Safety Program for Perinatal Care.

Science.gov (United States)

McArdle, Jill; Sorensen, Asta; Fowler, Christina I; Sommerness, Samantha; Burson, Katrina; Kahwati, Leila

2018-03-01

To assess implementation of safety strategies to improve management of births complicated by shoulder dystocia in labor and delivery units. Mixed-methods implementation evaluation. Labor and delivery units (N = 18) in 10 states participating in the Safety Program for Perinatal Care (SPPC). Shoulder dystocia is unpredictable, requiring rapid and coordinated action. Key informants were labor and delivery unit staff who implemented SPPC safety strategies. The SPPC was implemented by using the TeamSTEPPS teamwork and communication framework and tools, applying safety science principles (standardization, independent checks, and learn from defects) to shoulder dystocia management, and establishing an in situ simulation program focused on shoulder dystocia to practice teamwork and communication skills. Unit staff received training, a toolkit, technical assistance, and unit-specific feedback reports. Quantitative data on unit-reported process improvement measures and qualitative data from staff interviews were used to understand changes in use of safety principles, teamwork/communication, and in situ simulation. Use of shoulder dystocia safety strategies improved on the units. Differences between baseline and follow-up (10 months) were as follows: in situ simulation (50% vs. 89%), teamwork and communication (67% vs. 94%), standardization (67% to 94%), learning from defects (67% vs. 89%), and independent checks (56% vs. 78%). Interview data showed reasons to address management of shoulder dystocia, various approaches to implement safety practices, and facilitators and barriers to implementation. Successful management of shoulder dystocia requires a rapid, standardized, and coordinated response. The SPPC strategies to increase safety of shoulder dystocia management are scalable, replicable, and adaptable to unit needs and circumstances. Copyright © 2018 AWHONN, the Association of Women's Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights

Nurses' but not supervisors' safety practices are linked with job satisfaction.

Science.gov (United States)

Hurtado, David A; Kim, Seung-Sup; Subramanian, S V; Dennerlein, Jack T; Christiani, David C; Hashimoto, Dean M; Sorensen, Glorian

2017-10-01

To test the associations of safety practices as reported by nurses and their respective unit supervisors with job satisfaction. Psychosocial workplace factors are associated with job satisfaction; however, it is unknown whether nurses and supervisors accounts of safety practices are differentially linked to this outcome. Cross-sectional study design including nurses (n = 1052) nested in 94 units in two hospitals in Boston (MA, USA). Safety practices refer to the identification and control of occupational hazards at the unit. Safety practices were measured aggregating nurses' responses per unit, and supervisory levels. Individual's job satisfaction for each nurse was the response variable. Supervisors assessed safety practices more favourably than their unit nursing staff. Adjusted random intercept logistic regressions showed that the odds of higher job satisfaction were higher for nurses at units with better safety practices (OR: 1.67, 95% CI: 1.04, 2.68) compared with nurses at units that averaged lower safety practices. Supervisors' reports of safety practices were not correlated with the job satisfaction of their staff. Adequate safety practices might be a relevant managerial role that enhances job satisfaction among nurses. Nursing supervisors should calibrate their safety assessments with their nursing staff to improve nurses' job satisfaction. © 2017 John Wiley & Sons Ltd.

Management of operational safety in nuclear power plants. INSAG-13. A report by the International Nuclear Safety Advisory Group

International Nuclear Information System (INIS)

1999-01-01

The International Atomic Energy Agency's activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but they cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public's view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring the safety of nuclear power plants, the IAEA established the International Nuclear Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating, where possible, commonly shared safety principles. Engineering issues have received close attention from the nuclear community over many years. However, it is only in the last decade or so that organizational and cultural issues have been identified as vital to achieving safe operation. INSAG's publication No. 4 has been widely recognized as a milestone in advancing thinking about safety culture in the nuclear community and more widely. The present report deals with the framework for safety management that is necessary in organizations in order to promote safety culture. It deals with the general principles underlying the management of operational safety in a systematic way and provides guidance on good practices. It also draws on the results of audits and reviews to highlight how shortfalls in safety management have led to incidents at nuclear power plants. In addition, several specific issues are raised which are particularly topical in view of organizational changes that are taking place in the nuclear industry in various countries. Advice is given on how safety can be managed during organizational change, how safety

The hierarchy of environmental health and safety practices in the U.S. nanotechnology workplace.

Science.gov (United States)

Engeman, Cassandra D; Baumgartner, Lynn; Carr, Benjamin M; Fish, Allison M; Meyerhofer, John D; Satterfield, Terre A; Holden, Patricia A; Harthorn, Barbara Herr

2013-01-01

Manufacturing of nanoscale materials (nanomaterials) is a major outcome of nanotechnology. However, the potential adverse human health effects of manufactured nanomaterial exposure are not yet fully understood, and exposures in humans are mostly uncharacterized. Appropriate exposure control strategies to protect workers are still being developed and evaluated, and regulatory approaches rely largely on industry self-regulation and self-reporting. In this context of soft regulation, the authors sought to: 1) assess current company-reported environmental health and safety practices in the United States throughout the product life cycle, 2) consider their implications for the manufactured nanomaterial workforce, and 3) identify the needs of manufactured nanomaterial companies in developing nano-protective environmental health and safety practices. Analysis was based on the responses of 45 U.S.-based company participants in a 2009-2010 international survey of private companies that use and/or produce nanomaterials. Companies reported practices that span all aspects of the current government-recommended hierarchical approach to manufactured nanomaterials' exposure controls. However, practices that were tailored to current manufactured nanomaterials' hazard and exposure knowledge, whether within or outside the hierarchical approach, were reported less frequently than general chemical hygiene practices. Product stewardship and waste management practices-the influences of which are substantially downstream-were reported less frequently than most other environmental health and safety practices. Larger companies had more workers handling nanomaterials, but smaller companies had proportionally more employees handling nanomaterials and more frequently identified impediments to implementing nano-protective practices. Company-reported environmental health and safety practices suggest more attention to environmental health and safety is necessary, especially with regard to

Safety Management System in Croatia Control Ltd.

OpenAIRE

Pavlin, Stanislav; Sorić, Vedran; Bilać, Dragan; Dimnik, Igor; Galić, Daniel

2009-01-01

International Civil Aviation Organization and other international aviation organizations regulate the safety in civil aviation. In the recent years the International Civil Aviation Organization has introduced the concept of the safety management system through several documents among which the most important is the 2006 Safety Management Manual. It treats the safety management system in all the segments of civil aviation, from carriers, aerodromes and air traffic control to design, constructi...

Fluor Daniel Hanford Inc. integrated safety management system phase 1 verification final report

International Nuclear Information System (INIS)

PARSONS, J.E.

1999-01-01

The purpose of this review is to verify the adequacy of documentation as submitted to the Approval Authority by Fluor Daniel Hanford, Inc. (FDH). This review is not only a review of the Integrated Safety Management System (ISMS) System Description documentation, but is also a review of the procedures, policies, and manuals of practice used to implement safety management in an environment of organizational restructuring. The FDH ISMS should support the Hanford Strategic Plan (DOE-RL 1996) to safely clean up and manage the site's legacy waste; deploy science and technology while incorporating the ISMS theme to ''Do work safely''; and protect human health and the environment

Pesticide management approach towards protecting the safety and health of farmers in Southeast Asia.

Science.gov (United States)

Mohammad, Norsyazwani; Abidin, Emilia Zainal; How, Vivien; Praveena, Sarva Mangala; Hashim, Zailina

2018-06-27

It is estimated that pesticide production and use have increased continuously in the countries of Southeast Asia in recent years. Within the context of protecting the safety and health of workers in the agricultural sector, there is an existing gap in the implementation of the pesticide management framework because safety and health effects arising from occupational exposures continue to be reported. This study aims to provide narrative similarities, differences and weaknesses of the existing pesticide management system in Southeast Asian countries (Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Singapore, Thailand and Vietnam) within the context of occupational safety and health. This is preliminary traditional review study. Pesticide regulation and management at the country level were identified using web-based search engines such as Scopus, ScienceDirect, PubMed and Google. Book, reports, legislation document and other documents retrieved were also gathered from international organizations and specific websites of governmental agency in Southeast Asian countries. The scope of this review is only limited to literature written in English. In total, 44 review articles, reports and documents were gathered for this study. The approach of pesticide management in protecting safety and health in the agricultural setting were benchmarked according to the elements introduced by the United States Environmental Protection Agency, namely, (1) the protection of workers and (2) the practice of safety. All countries have assigned a local authority and government organization to manage and control pesticide use in the agricultural sector. The countries with the highest usage of pesticide are Thailand, Philippines and Malaysia. Most Southeast Asian countries have emphasized safety practice in the management of pesticide usage, but there were less emphasis on the element of protection of workers within the framework in Indonesia, Myanmar, Thailand and Vietnam

Translating Health Services Research into Practice in the Safety Net.

Science.gov (United States)

Moore, Susan L; Fischer, Ilana; Havranek, Edward P

2016-02-01

To summarize research relating to health services research translation in the safety net through analysis of the literature and case study of a safety net system. Literature review and key informant interviews at an integrated safety net hospital. This paper describes the results of a comprehensive literature review of translational science literature as applied to health care paired with qualitative analysis of five key informant interviews conducted with senior-level management at Denver Health and Hospital Authority. Results from the literature suggest that implementing innovation may be more difficult in the safety net due to multiple factors, including financial and organizational constraints. Results from key informant interviews confirmed the reality of financial barriers to innovation implementation but also implied that factors, including institutional respect for data, organizational attitudes, and leadership support, could compensate for disadvantages. Translating research into practice is of critical importance to safety net providers, which are under increased pressure to improve patient care and satisfaction. Results suggest that translational research done in the safety net can better illuminate the special challenges of this setting; more such research is needed. © Health Research and Educational Trust.

Evaluating Performance of Safety Management and Occupational Health Using Total Quality Safety Management Model (TQSM

Directory of Open Access Journals (Sweden)

E Mohammadfam

2015-11-01

Full Text Available Introduction: All organizations, whether public or private, necessitate performance evaluation systems in regard with growth, stability, and development in the competitive fields. One of the existing models for performance evaluation of occupational health and safety management is Total Quality Safety Management model (TQSM. Therefore, the present study aimed to evaluate performance of safety management and occupational health utilizing TQSM model. Methods: In this descriptive-analytic study, the population consisted of 16 individuals, including managers, supervisors, and members of technical protection and work health committee. Then the participants were asked to respond to TQSM questionnaire before and after the implementation of Occupational Health & Safety Advisory Services 18001 (OHSAS18001. Ultimately, the level of each program as well as the TQSM status were determined before and after the implementation of OHSAS18001. Results: The study results showed that the scores obtained by the company before OHSAS 18001’s implementation, was 43.7 out of 312. After implementing OHSAS 18001 in the company and receiving the related certificate, the total score of safety program that company could obtain was 127.12 out of 312 demonstrating a rise of 83.42 scores (26.8%. The paired t-test revealed that mean difference of TQSM scores before and after OHSAS 18001 implementation was proved to be significant (p> 0.05. Conclusion: The study findings demonstrated that TQSM can be regarded as an appropriate model in order to monitor the performance of safety management system and occupational health, since it possesses the ability to quantitatively evaluate the system performance.

Knowledge management and networking for enhancing nuclear safety

International Nuclear Information System (INIS)

Taniguchi, T.; Lederman, L.

2004-01-01

Striving for innovative solutions to enhance efficiency of programme delivery and a wider outreach of its nuclear safety activities, the International Atomic Energy Agency (IAEA) has developed an Integrated Safety Approach as a platform for linking its safety related statutory functions and its many associated activities. The approach recognizes the vital importance of effective management of the knowledge base and builds on the integration between the IAEA's safety standards and all aspects of the provision for their application, including peer reviews and technical meetings to share lessons learned. The IAEA is using knowledge management techniques to develop process flows, map safety knowledge and to promote knowledge sharing. The first practical application was the establishment of a knowledge base related to safety aspects of ageing and long-term operation of nuclear power plants. The IAEA is also promoting and facilitating the establishment of regional nuclear and radiation safety networks to preserve existing knowledge and expertise as well as to strengthen sharing and creation of new knowledge in these fields. Prominent examples are the Asian Nuclear Safety Network established in the frame of the IAEA's Programme on the Safety of Nuclear Installations in South East Asia, Pacific and Far East Countries, and the Ibero-American Radiation Safety Network in the frame of the Ibero-American Forum of Nuclear Regulators. Results to date are most encouraging and suggest that this pioneer work should be extended to other regions and eventually to a global nuclear safety network. Responsive to the need of Member States, the IAEA Secretariat has prepared and made available a large number of up-to-date training packages in nuclear, radiation, transport and waste safety, using IAEA safety standards as a basis. It is also providing instruction to trainers in Member States on the use of these modules. This ensures that the material is properly used and that the IAEA

Safety management in research and development organisation

International Nuclear Information System (INIS)

Nivedha, T.

2016-01-01

Health and safety is one of the most important aspects of an organizations smooth and effective functioning. It depends on the safety management, health management, motivation, leadership and training, welfare facilities, accident statistics, policy, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Workplace accidents are increasingly common, main causes are untidiness, noise, too hot or cold environments, old or poorly maintained machines, and lack of training or carelessness of employees. One of the biggest issues facing employers today is the safety of their employees. This study aims at analyzing the occupational health and safety of Research organization in Indira Gandhi Centre for Atomic Research by gathering information on health management, safety management, motivation, leadership and training, welfare facilities, accident statistics, organization and administration, hazard control and risk analysis, monitoring, statistics and reporting. Data were collected by using questionnaires which were developed on health and safety management system. (author)

Management concepts and safety applications for nuclear fuel facilities

International Nuclear Information System (INIS)

Eisner, H.; Scotti, R.S.

1995-05-01

This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities

Management concepts and safety applications for nuclear fuel facilities

Energy Technology Data Exchange (ETDEWEB)

Eisner, H.; Scotti, R.S. [George Washington Univ., Washington, DC (United States). School of Engineering and Applied Science; Delicate, W.S. [KEVRIC Co., Inc., Silver Spring, MD (United States)

1995-05-01

This report presents an overview of effectiveness of management control of safety. It reviews several modern management control theories as well as the general functions of management and relates them to safety issues at the corporate and at the process safety management (PSM) program level. Following these discussions, structured technique for assessing management of the safety function is suggested. Seven modern management control theories are summarized, including business process reengineering, the learning organization, capability maturity, total quality management, quality assurance and control, reliability centered maintenance, and industrial process safety. Each of these theories is examined for-its principal characteristics and implications for safety management. The five general management functions of planning, organizing, directing, monitoring, and integrating, which together provide control over all company operations, are discussed. Under the broad categories of Safety Culture, Leadership and Commitment, and Operating Excellence, key corporate safety elements and their subelements are examined. The three categories under which PSM program-level safety issues are described are Technology, Personnel, and Facilities.

Nuclear safety management at the Wolsong NGS

Energy Technology Data Exchange (ETDEWEB)

Bong-Seob, Han [Korea Electric Power Corp., Wolson NPP no. 1 and 2 (Korea, Republic of)

1997-12-01

Nuclear safety management at the Wolsong nuclear power plant is described, including the following issues: site selection; plant history; operational goals; operational guidelines; reactor safety; safety training; plant maintenance; management of plant equipment lifetime; future tasks.

Nuclear safety management at the Wolsong NGS

International Nuclear Information System (INIS)

Han Bong-Seob

1997-01-01

Nuclear safety management at the Wolsong nuclear power plant is described, including the following issues: site selection; plant history; operational goals; operational guidelines; reactor safety; safety training; plant maintenance; management of plant equipment lifetime; future tasks

Airline Safety Management: The development of a proactive safety mechanism model for the evolution of safety management system

OpenAIRE

Hsu, Yueh-Ling

2004-01-01

The systemic origins of many accidents have led to heightened interest in the way in which organisations identify and manage risks within the airline industry. The activities which are thought to represent the term "organisational accident", "safety culture" and "proactive approach" are documented and seek to explain the fact that airlines differ in their willingness and ability to conduct safety management. However, an important but yet relatively undefined task in the airline...

Joint Convention on the safety of spent fuel management and on the safety of radioactive waste management. Third national report on the implementation of obligations of the Joint Convention

International Nuclear Information System (INIS)

2008-09-01

This report is published in compliance with the Joint Convention and presents the measures implemented by France to comply with each of the obligations defined by this convention. The structure of the report refers to the articles of the Convention. Therefore, after a presentation of the main evolutions since France's previous report, the following themes are addressed: policies and practices, scope of application, inventories and lists, legislative and regulatory system, other general safety provisions, safety of spent fuel management, trans-boundary movement, disused sealed sources, and planned activities to improve safety

Practical Child Safety Education in England: A National Survey of the Child Safety Education Coalition

Science.gov (United States)

Mulvaney, Caroline A.; Watson, Michael C.; Walsh, Patrick

2013-01-01

Objective: To examine the provision of practical safety education by Child Safety Education Coalition (CSEC) organizations in England. Design: A postal survey. Setting: Providers of child practical safety education who were also part of CSEC. Methods: In February 2010 all CSEC organizations were sent a self-completion postal questionnaire which…

KIT safety management. Annual report 2012

International Nuclear Information System (INIS)

Frank, Gerhard

2013-01-01

The KIT Safety Management Service Unit (KSM) guarantees radiological and conventional technical safety and security of Karlsruhe Institute of Technology and controls the implementation and observation of legal environmental protection requirements. KSM is responsible for - licensing procedures, - industrial safety organization, - control of environmental protection measures, - planning and implementation of emergency preparedness and response, - operation of radiological laboratories and measurement stations, - extensive radiation protection support and the - the execution of security tasks in and for all organizational units of KIT. Moreover, KSM is in charge of wastewater and environmental monitoring for all facilities and nuclear installations all over the KIT campus. KSM is headed by the Safety Commissioner of KIT, who is appointed by the Presidential Committee. Within his scope of procedure for KIT, the Safety Commissioner controls the implementation of and compliance with safety-relevant requirements. The KIT Safety Management is certified according to DIN EN ISO 9001, its industrial safety management is certified by the VBG as ''AMS-Arbeitsschutz mit System'' and, hence, fulfills the requirements of NLF / ISO-OSH 2001. KSM laboratories are accredited according to DIN EN ISO/IEC 17025. To the extent possible, KSM is committed to maintaining competence in radiation protection and to supporting research and teaching activities. The present reports lists the individual tasks of the KIT Safety Management and informs about the results achieved in 2012. Status figures in principle reflect the status at the end of the year 2012. The processes described cover the areas of competence of KSM.

Incorporating organisational safety culture within ergonomics practice.

Science.gov (United States)

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

Using baby books to increase new mothers' safety practices.

Science.gov (United States)

Reich, Stephanie M; Penner, Emily K; Duncan, Greg J

2011-01-01

To determine whether educational baby books are an effective method for increasing low-income, first-time mothers' safety practices during their child's first 18 months. Primiparous women (n = 167) were randomly assigned to 1 of 3 groups: an educational book group, a noneducational book group, or a no-book group. Home visits and interviews measured safety practices when women were in their third trimester of pregnancy (baseline) and when their children were 2, 4, 6, 9, 12, and 18 months of age. Women in the educational book group had fewer risks in their homes and exercised more safety practices than the no-book group (- 20% risk reduction; effect size = -.30). When the safety practices involved little time or expense (eg, putting away sharp objects), the educational book group was significantly more likely to engage in these behaviors than the no-book group (40% higher practices; effect size = 0.19) or noneducational book group (27% higher practices; effect size = 0.13). However, no differences were found between groups for behaviors that required high effort in time, money, or hassle (eg, installing latches on cabinets). Educational baby books appear to be an easy and low-cost way to increase the safety practices of new mothers, especially if the practices involve little to no time, money, or hassle. Copyright © 2011 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Using Baby Books to Increase New Mothers’ Safety Practices

Science.gov (United States)

Reich, Stephanie M.; Penner, Emily K.; Duncan, Greg J.

2010-01-01

Objective To determine if educational baby books are an effective method for increasing low-income, first-time mothers’ safety practices during their child’s first 18 months. Patients and Methods Primiparous women (n = 167) were randomly assigned to one of three groups: an educational book group, a non-educational book group, or a no-book group. Home visits and interviews measured safety practices when women were in their third trimester of pregnancy (baseline) and when their child was 2, 4, 6, 9, 12, and 18 months of age. Results Women in the educational book group had fewer risks in their homes and exercised more safety practices than the no-book group (effect size = −0.30; 20% risk reduction). When the safety practices involved little time or expense (e.g., putting away sharp objects), the educational book group was significantly more likely to engage in these behaviors than the no-book (40% higher practices; effect size = 0.19) or non-educational book groups (27% higher practices; effect size = 0.13). However, no differences were found between groups for behaviors that required high effort in time, money or hassle (e.g., installing latches on cabinets). Discussion Educational baby books appear to be an easy and low cost way to increase the safety practices of new mothers, especially if the practices involve little to no time, money, and hassle. PMID:21272822

Safety management systems and their role in achieving high standards of operational safety

International Nuclear Information System (INIS)

Coulston, D.J.; Baylis, C.C.

2000-01-01

Achieving high standards of operational safety requires a robust management framework that is visible to all personnel with responsibility for its implementation. The structure of the management framework must ensure that all processes used to manage safety interlink in a logical and coherent manner, that is, they form a management system that leads to continuous improvement in safety performance. This Paper describes BNFL's safety management system (SMS). The SMS has management processes grouped within 5 main elements: 1. Policy, 2. Organisation, 3. Planning and Implementation, 4. Measuring and Reviewing Performance, 5. Audit. These elements reflect the overall process of setting safety objective (from Policy), measuring success and reviewing the performance. Effective implementation of the SMS requires senior managers to demonstrate leadership through their commitment and accountability. However, the SMS as a whole reflects that every employee at every level within BNFL is responsible for safety of operations under their control. The SMS therefore promotes a proactive safety culture and safe operations. The system is formally documented in the Company's Environmental, Health and Safety (EHS) Manual. Within in BNFL Group, the Company structures enables the Manual to provide overall SMS guidance and co-ordination to its range of nuclear businesses. Each business develops the SMS to be appropriate at all levels of its organisation, but ensuring that each level is consistent with the higher level. The Paper concludes with a summary of BNFL's safety performance. (author)

SafetyAnalyst : software tools for safety management of specific highway sites

Science.gov (United States)

2010-07-01

SafetyAnalyst provides a set of software tools for use by state and local highway agencies for highway safety management. SafetyAnalyst can be used by highway agencies to improve their programming of site-specific highway safety improvements. SafetyA...

INTEGRATED SAFETY MANAGEMENT SYSTEM IN AIR TRAFFIC SERVICES

Directory of Open Access Journals (Sweden)

Volodymyr Kharchenko

2014-06-01

Full Text Available The article deals with the analysis of the researches conducted in the field of safety management systems.Safety management system framework, methods and tools for safety analysis in Air Traffic Control have been reviewed.Principles of development of Integrated safety management system in Air Traffic Services have been proposed.

Analysis and design on airport safety information management system

Directory of Open Access Journals (Sweden)

Yan Lin

2017-01-01

Full Text Available Airport safety information management system is the foundation of implementing safety operation, risk control, safety performance monitor, and safety management decision for the airport. The paper puts forward the architecture of airport safety information management system based on B/S model, focuses on safety information processing flow, designs the functional modules and proposes the supporting conditions for system operation. The system construction is helpful to perfecting the long effect mechanism driven by safety information, continually increasing airport safety management level and control proficiency．

Implementation of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management

International Nuclear Information System (INIS)

Stewart, L.; Tonkay, D.

2004-01-01

This paper discusses the implementation of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. The Joint Convention: establishes a commitment with respect to safe management of spent nuclear fuel and radioactive waste; requires the Parties to ''take appropriate steps'' to ensure the safety of their spent fuel and waste management activities, but does not delineate standards the Parties must meet; and seeks to attain, through its Contracting Parties, a higher level of safety with respect to management of their spent nuclear fuel, disused sealed sources, and radioactive waste

Involvement of patients with cancer in patient safety: a qualitative study of current practices, potentials and barriers.

Science.gov (United States)

Martin, Helle Max; Navne, Laura Emdal; Lipczak, Henriette

2013-10-01

Patient involvement in patient safety is widely advocated but knowledge regarding implementation of the concept in clinical practice is sparse. To investigate existing practices for patient involvement in patient safety, and opportunities and barriers for further involvement. A qualitative study of patient safety involvement practices in patient trajectories for prostate, uterine and colorectal cancer in Denmark. Observations from four hospital wards and interviews with 25 patients with cancer, 11 hospital doctors, 10 nurses, four general practitioners and two private practicing gynaecologists were conducted using ethnographic methodology. Patient safety was not a topic of attention for patients or dominant in communication between patients and healthcare professionals. The understanding of patient safety in clinical practice is almost exclusively linked to disease management. Involvement of patients is not systematic, but healthcare professionals and patients express willingness to engage. Invitation and encouragement of patients to become involved could be further systematised and developed. Barriers include limited knowledge of patient safety, of specific patient safety involvement techniques and concern regarding potential negative impact on doctor-patient relationship. Involvement of patients in patient safety must take into account that despite stated openness to the idea of involvement, patients and health professionals may not in practice show immediate concern. Lack of systematic involvement can also be attributed to limited knowledge about how to implement involvement beyond the focus of self-monitoring and compliance and a concern about the consequences of patient involvement for treatment outcomes. To realise the potential of patients' and health professionals' shared openness towards involvement, there is a need for more active facilitation and concrete guidance on how involvement can be practiced by both parties.

Seismic Safety Guide

International Nuclear Information System (INIS)

Eagling, D.G.

1985-01-01

The Seismic Safety Guide provides facilities managers with practical guidelines for administering a comprehensive earthquake safety program. Most facilities managers, unfamiliar with earthquake engineering, tend to look for answers in techniques more sophisticated than required to solve the actual problems in earthquake safety. Often the approach to solutions to these problems is so academic, legalistic, and financially overwhelming that mitigation of actual seismic hazards simply does not get done in a timely, cost-effective way. The objective of the Guide is to provide practical advice about earthquake safety so that managers and engineers can get the job done without falling into common pitfalls, prolonged diagnosis, and unnecessary costs. It is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, non-structural elements, life lines, and risk management. 5 references

Editorial safety science special issue road safety management.

NARCIS (Netherlands)

Wegman, F.C.M. & Hagezieker, M.P.

2014-01-01

The articles presented in this Special Issue on Road Safety Management represent an illustration of the growing interest in policy-related research in the area of road safety. The complex nature of this type of research combined with the observation that scientific journals pay limited attention to

Fluor Daniel Hanford Inc. integrated safety management system phase 1 verification final report

Energy Technology Data Exchange (ETDEWEB)

PARSONS, J.E.

1999-10-28

The purpose of this review is to verify the adequacy of documentation as submitted to the Approval Authority by Fluor Daniel Hanford, Inc. (FDH). This review is not only a review of the Integrated Safety Management System (ISMS) System Description documentation, but is also a review of the procedures, policies, and manuals of practice used to implement safety management in an environment of organizational restructuring. The FDH ISMS should support the Hanford Strategic Plan (DOE-RL 1996) to safely clean up and manage the site's legacy waste; deploy science and technology while incorporating the ISMS theme to ''Do work safely''; and protect human health and the environment.

Human Factors in Fire Safety Management and Prevention

Directory of Open Access Journals (Sweden)

M.A. Othuman Mydin

2014-07-01

Full Text Available Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behavior, compartmentalization, and investigation of fire and its related emergencies, as well as the research and development, production, testing and application of mitigating systems. Problems still occurred despite of the adequate fire safety systems installed. For most people in high-risk buildings, not all accidents were caused by them. They were more likely to be the victims of a fire that occurred. Besides damaging their properties and belongings, some people were burned to death for not knowing what to do if fire happens in their place. This paper will present the human factors in fire safety management and prevention system.

Advanced safety management systems for maintenance of pipeline integrity

International Nuclear Information System (INIS)

Borysiewicz, M.; Potempski, S.

2005-01-01

One of the duties of the pipeline's operator is to introduce means for protection of human safety and the environment. This should be reflected in preparation of comprehensive Risk Management System with its key element Activity Programme for Management of Pipeline Integrity. In the paper such programme has been described taking into account law regulations and practical activities undertaken in technologically advanced countries (mainly USA and EU), where such solutions are implemented in routine operations. Possible solutions of realization of all elements of the programme, as well as information on utilization of computer aided support have been also included. (authors)

Fundamental attributes of a practical configuration management program for nuclear plant design control

International Nuclear Information System (INIS)

Klein, S.M.

1988-06-01

This summarizes the results of an evaluation of findings identifies during a number of Safety-System Functional Inspections and Safety System Outage Modification Inspections which are related to configuration management for nuclear plant design control. A computerized database of these findings was generated from a review of the design inspection reports. Based on the results of the evaluation, attributes of a configuration management program were developed which are responsive to minimizing these types of inspection findings. Incorporation of these key attributes is considered good practice in the development of a configuration management program for design control at operating nuclear plants

Standardized safety management of AP1000 nuclear power plant

International Nuclear Information System (INIS)

Li Xingwen; Cao Zhiqiang; Cong Jiuyuan

2011-01-01

In 2002, China published and implemented the Law of the People's Republic of China on Work Safety and promulgated a series of guidelines and policies, which strengthened the safety management supervision. Standardization of safety, as another important step on safety supervision, comes after safety assesment and safety production licensing system, is also a permanent solution. Standardization of safety is a strategic, long term and fundamental work, which is also the basic access to achieving scientific safety management and increasing the inherent safety of an enterprise. Haiyang AP1000 nuclear power plant, adopting the modularized, 'open-top' and parallel construction means, overturned the traditional construction theory of installation work comes after the civil work and greatly shorten the construction period. At the same time, the notable increase of oversize module transportation and lifting and parallel construction raises higher demands for safety management. This article combines the characteristics and difficulties of safety management for Haiyang AP1000 nuclear power plant, puts forward ideas and methods for standardized safety management, and could also serve as reference to the safety management for other AP1000 projects. (authors)

Safety management in a competitiveness context

International Nuclear Information System (INIS)

Rousseau, J.M.

2013-01-01

This paper summarizes the first assessment performed by the IRSN related to the management of French power water reactors (PWR) safety. The conclusions of this assessment were submitted to the 'advisory committee' in April 2008. After an introduction reminding the French industrial and regulatory context as well as the way the assessment has been conducted, the relationship between safety and competitiveness is briefly discussed. Then the main issues and recommendations pointed out by the IRSN assessment are presented. These concern in particular: the balance between the shift operation team and the outage project team; the real-time decision-making capabilities of plant managers; the lessons learnt from the analyses of decision-making processes; the management of cultural changes. Finally, a conclusion presents a global diagnosis in terms of strengths and weaknesses of the EDF safety management system and proposes some ideas regarding the 'priority given to safety', the meaning of safety used by operative people and the continuous improvement approach. Lastly, methodological lessons are pointed out. The slides of the presentation have been added at the end of the paper. (author)

Management of the Interface between Nuclear Safety and Security for Research Reactors

International Nuclear Information System (INIS)

2016-08-01

The aim of this publication is to provide technical guidelines and practical information to assist Member States, operating organizations and regulatory bodies, on the basis of international good practices, and to manage the interface between nuclear safety and security at research reactor facilities in an integrated and coordinated manner. The publication was developed based on input from IAEA technical and consultants' meetings held between 2013 and 2015

Eurosafe 2006 radioactive waste management: long term safety requirements and societal expectations

International Nuclear Information System (INIS)

2006-01-01

The EUROSAFE Forum is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety, to share experiences, exchange technical and scientific opinions, and conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum 2006 focuses on 'Radioactive Waste Management: Long Term Safety Requirements and Societal Expectations' from the point of view of the authorities, TSOs and industry and presents the latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe. A high level of nuclear safety is a priority for Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining increasing recognition. This

Eurosafe 2006 radioactive waste management: long term safety requirements and societal expectations

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The EUROSAFE Forum is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety, to share experiences, exchange technical and scientific opinions, and conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum 2006 focuses on 'Radioactive Waste Management: Long Term Safety Requirements and Societal Expectations' from the point of view of the authorities, TSOs and industry and presents the latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe. A high level of nuclear safety is a priority for Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining increasing recognition. This

Eurosafe 2006 radioactive waste management: long term safety requirements and societal expectations

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

The EUROSAFE Forum is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety, to share experiences, exchange technical and scientific opinions, and conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum 2006 focuses on 'Radioactive Waste Management: Long Term Safety Requirements and Societal Expectations' from the point of view of the authorities, TSOs and industry and presents the latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe. A high level of nuclear safety is a priority for Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining increasing recognition

Quality Management Audits in Nuclear Medicine Practices. 2. Ed

International Nuclear Information System (INIS)

2015-01-01

Quality management systems are essential and should be maintained with the intent to continuously improve effectiveness and efficiency, enabling nuclear medicine to achieve the expectations of its quality policy, satisfy its customers and improve professionalism. The quality management (QM) audit methodology in nuclear medicine practice, introduced in this publication, is designed to be applied to a variety of economic circumstances. A key outcome is a culture of reviewing all processes of the clinical service for continuous improvement in nuclear medicine practice. Regular quality audits and assessments are vital for modern nuclear medicine services. More importantly, the entire QM and audit process has to be systematic, patient oriented and outcome based. The management of services should also take into account the diversity of nuclear medicine services around the world and multidisciplinary contributions. The latter include clinical, technical, radiopharmaceutical, medical physics and radiation safety procedures

Patient safety in practical nurses' education: A cross-sectional survey of newly registered practical nurses in Canada.

Science.gov (United States)

VanDenKerkhof, Elizabeth; Sears, Nancy; Edge, Dana S; Tregunno, Deborah; Ginsburg, Liane

2017-04-01

Practical nurses have experienced an increasing scope of practice, including an expectation to care for complex patients and function on interdisciplinary teams. Little is known about the degree to which patient safety principles are addressed in practical nursing education. To examine self-reported patient safety competencies of practical nurses. A cross-sectional online survey (July 2014) and face-to-face interviews (June 2015). Ontario, Canada. Survey participants were practical nurses newly registered with the College of Nurses of Ontario between January 2012 and December 2013. Interview participants were faculty and students in a practical nursing program in Ontario. Survey respondents completed the Health Professional Education in Patient Safety Survey online. Self-reported competencies in various patient safety domains were compared between classroom and clinical settings. Faculty members were interviewed about educational preparation of practical nurses and students were interviewed to provide insight into interpretation of survey questions. The survey response rate was 28.4% (n=1104/3883). Mean domain scores indicated a high level of confidence in patient safety competence (Nurses of Ontario >2years and in those who obtained their education outside of Canada. Faculty believed their approach to teaching and learning instilled a deep understanding of the limits to practical nurse autonomous practice. Practical nurses were confident in what they learned about patient safety in their educational programs. The high degree of patient safety competence may be a true reflection of practical nurses understanding of, and comfort with, the limits of their knowledge and, ultimately, the limits of their individual autonomous practice. Further exploration as to whether the questionnaire requires additional modification for use with practical nurse populations is warranted. However, this study provides the first examination of practical nurses' perspectives and

Area 5 Radioactive Waste Management Site Safety Assessment Document

International Nuclear Information System (INIS)

Horton, K.K.; Kendall, E.W.; Brown, J.J.

1980-02-01

The Area 5 Radioactive Waste Management Safety Assessment Document evaluates site characteristics, facilities and operating practices which contribute to the safe handling and storage/disposal of radioactive wastes at the Nevada Test Site. Physical geography, cultural factors, climate and meteorology, geology, hydrology (with emphasis on radionuclide migration), ecology, natural phenomena, and natural resources are discussed and determined to be suitable for effective containment of radionuclides. Also considered, as a separate section, are facilities and operating practices such as monitoring; storage/disposal criteria; site maintenance, equipment, and support; transportation and waste handling; and others which are adequate for the safe handling and storage/disposal of radioactive wastes. In conclusion, the Area 5 Radioactive Waste Management Site is suitable for radioactive waste handling and storage/disposal for a maximum of twenty more years at the present rate of utilization

Regulatory practices and safety standards for nuclear power plants

International Nuclear Information System (INIS)

1989-01-01

The International Symposium on Regulatory Practices and Safety Standards for Nuclear Power Plants was jointly organized by the International Atomic Energy Agency (IAEA), for Nuclear Energy Agency of the OECD and the Government of the Federal Republic of Germany with the objective of providing an international forum for the exchange of information on regulatory practices and safety standards for nuclear power plants. The Symposium was held in Munich, Federal Republic of Germany, from 7 to 10 November 1988. It was attended by 201 experts from some 32 Member States and 4 international organizations. Fifty-one papers from 19 Member States and 2 international organizations were presented and discussed in 5 technical sessions covering the following subjects: National Regulatory Practices and Safety Standards (14 papers); Implementation of Regulatory Practices - Technical Issues (8 papers); Implementation of Regulatory Practices - Operational Aspects (8 papers); Developments and Trends in Safety Standards and Practices (11 papers); International Aspects (10 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

Indicators of club management practices and biological measurements of patrons' drug and alcohol use.

Science.gov (United States)

Byrnes, Hilary F; Miller, Brenda A; Johnson, Mark B; Voas, Robert B

2014-12-01

Electronic music and dance events in nightclubs attract patrons with heavy alcohol/drug use. Public health concerns are raised from risks related to these behaviors. Practices associated with increased risk in these club settings need to be identified. The relationship between club management practices and biological measures of patrons' alcohol/drug use is examined. Observational data from 25 events across six urban clubs were integrated with survey data (N = 738 patrons, 42.8% female) from patrons exiting these events, 2010-2012. Five indicators of club management practices were examined using mixed model regressions: club security, bar crowding, safety signs, serving intoxicated patrons, and isolation. Analyses revealed that serving intoxicated patrons and safety signs were related to substance use. Specifically, serving intoxicated patrons was related to heavy alcohol and drug use at exit, while safety signs were marginally related to less exit drug use. CONCLUSIONS/IMPORTANCE: Findings indicate observable measures in nightclubs provide important indicators for alcohol/drug use, suggesting practices to target. Study strengths include the use of biological measures of substance use on a relatively large scale. Limitations and future directions are discussed.

Management commitment to safety vs. employee perceived safety training and association with future injury.

Science.gov (United States)

Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2012-07-01

The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the

Do management practices support or constrain safe driving behaviour? A multi-level investigation in a sample of occupational drivers.

Science.gov (United States)

Newnam, Sharon; Warmerdam, Amanda; Sheppard, Dianne; Griffin, Mark; Stevenson, Mark

2017-05-01

It has been estimated that one-third of all work-related deaths occur while driving for work-related purposes. Despite this, many organisations are unaware of the practices, beyond those that identify and control the impact of unforeseen events (i.e., risk management), that predispose drivers to risk. This study addresses the issue by identifying the management practices operationalised as, High Performance Workplace Systems (HPWS) that influence safe driver behaviour. The study also explores the value given to safety by senior level management as a moderator of the relationship between HPWS practices and driver behaviour. Each factor was tested within a two level hierarchical model consisting of 911 drivers, nested within 161 supervisors and 83 organisations. The findings highight that under conditions of high investment in job and work design, communication and selection practices, drivers reported poorer driving behaviour. An interaction effect also demonstrated that under conditions of high investment in remuneration, drivers reported safer behaviour, but only when they perceived that managers valued and prioritised safety. The findings challenge current thinking in the management of workplace road safety. Copyright © 2017 Elsevier Ltd. All rights reserved.

International conference on the safety of radioactive waste management. Contributed papers

International Nuclear Information System (INIS)

2000-03-01

This book contains 104 contributed papers submitted on issues falling within the thematic scope of the Conference. The papers present technical and regulatory approaches and practices on safety in spent nuclear fuel and radioactive waste management including storage, processing and final disposal. Each of the papers was individually indexed and provided with an abstract

International conference on the safety of radioactive waste management. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This book contains 104 contributed papers submitted on issues falling within the thematic scope of the Conference. The papers present technical and regulatory approaches and practices on safety in spent nuclear fuel and radioactive waste management including storage, processing and final disposal. Each of the papers was individually indexed and provided with an abstract.

Developing a strong safety culture - a safety management challenge

International Nuclear Information System (INIS)

Low, M.; Gipson, G. P.; Williams, M.

1995-01-01

The approach is presented adapted by Nuclear Electric to build a strong safety culture through the development of its safety management system. Two features regarded as critical to a strong safety culture are: provision of effective communications to promote an awareness and ownership of safety among craft, and commitment to continuous improvement with a genuine willingness to learn from own experiences and those from others. (N.T.) 5 refs., 4 figs., 1 tab

Report of study group 4.3 ''pipeline integrity management and safety''

Energy Technology Data Exchange (ETDEWEB)

Clavel, P.

2000-07-01

This report highlights the Pipeline integrity Management methods being implemented by gas companies. These aim at maintaining the current high safety level, prevent major hazards, ensure the integrity of the pipeline and protect people and environment in the vicinity of the pipeline in the most cost effective way. It should be noticed that Pipeline Integrity Management aspects, technical and organisational, are included in the more general framework of the Safety Management System. Currently, more and more gas companies implement such a system on the basis of standards like ISO 9000 and so on. In this way, the report shows how practices of Pipeline Integrity Management are continually developing in order to adapt to their environment, and to improve performance. Past experience and imminent developments show that Pipeline Integrity Management is a flexible and efficient approach to improve safety in the long term. Consequently, Pipeline Integrity Management Systems are, under the control of authorities, the best alternative to additional safety regulations. Within the context of deregulation of the European markets and globalization Pipeline Integrity Management appears to be a tool to promote the gas industry in the eyes of the authorities, the market regulators and the customers (industrialists,...). (author)

Inspirations from Dupont Safety Management System

Institute of Scientific and Technical Information of China (English)

Ma Yong

2009-01-01

@@ Dupont,with its 200 years of safety management experience,tells us:all safety accidents can be prevented. Dupont has a history of more than 200 years,the concept of "safety is priority"has never changed.Dupont is just another word for safety.

Restaurant manager and worker food safety certification and knowledge.

Science.gov (United States)

Brown, Laura G; Le, Brenda; Wong, Melissa R; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A

2014-11-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N=387) and workers (N=365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge.

Restaurant Manager and Worker Food Safety Certification and Knowledge

Science.gov (United States)

Brown, Laura G.; Le, Brenda; Wong, Melissa R.; Reimann, David; Nicholas, David; Faw, Brenda; Davis, Ernestine; Selman, Carol A.

2017-01-01

Over half of foodborne illness outbreaks occur in restaurants. To combat these outbreaks, many public health agencies require food safety certification for restaurant managers, and sometimes workers. Certification entails passing a food safety knowledge examination, which is typically preceded by food safety training. Current certification efforts are based on the assumption that certification leads to greater food safety knowledge. The Centers for Disease Control and Prevention conducted this study to examine the relationship between food safety knowledge and certification. We also examined the relationships between food safety knowledge and restaurant, manager, and worker characteristics. We interviewed managers (N = 387) and workers (N = 365) about their characteristics and assessed their food safety knowledge. Analyses showed that certified managers and workers had greater food safety knowledge than noncertified managers and workers. Additionally, managers and workers whose primary language was English had greater food safety knowledge than those whose primary language was not English. Other factors associated with greater food safety knowledge included working in a chain restaurant, working in a larger restaurant, having more experience, and having more duties. These findings indicate that certification improves food safety knowledge, and that complex relationships exist among restaurant, manager, and worker characteristics and food safety knowledge. PMID:25361386

Management of Operational Safety in Nuclear Power Plants. INSAG-13. A report by the International Nuclear Safety Advisory Group (Russian Edition)

International Nuclear Information System (INIS)

2015-01-01

The International Atomic Energy Agency's activities relating to nuclear safety are based upon a number of premises. First and foremost, each Member State bears full responsibility for the safety of its nuclear facilities. States can be advised, but they cannot be relieved of this responsibility. Secondly, much can be gained by exchanging experience; lessons learned can prevent accidents. Finally, the image of nuclear safety is international; a serious accident anywhere affects the public's view of nuclear power everywhere. With the intention of strengthening its contribution to ensuring the safety of nuclear power plants, the IAEA established the International Nuclear Safety Advisory Group (INSAG), whose duties include serving as a forum for the exchange of information on nuclear safety issues of international significance and formulating, where possible, commonly shared safety principles. Engineering issues have received close attention from the nuclear community over many years. However, it is only in the last decade or so that organizational and cultural issues have been identified as vital to achieving safe operation. INSAG's publication No. 4 has been widely recognized as a milestone in advancing thinking about safety culture in the nuclear community and more widely. The present report deals with the framework for safety management that is necessary in organizations in order to promote safety culture. It deals with the general principles underlying the management of operational safety in a systematic way and provides guidance on good practices. It also draws on the results of audits and reviews to highlight how shortfalls in safety management have led to incidents at nuclear power plants. In addition, several specific issues are raised which are particularly topical in view of organizational changes that are taking place in the nuclear industry in various countries. Advice is given on how safety can be managed during organizational change, how

Understanding middle managers' influence in implementing patient safety culture.

Science.gov (United States)

Gutberg, Jennifer; Berta, Whitney

2017-08-22

The past fifteen years have been marked by large-scale change efforts undertaken by healthcare organizations to improve patient safety and patient-centered care. Despite substantial investment of effort and resources, many of these large-scale or "radical change" initiatives, like those in other industries, have enjoyed limited success - with practice and behavioural changes neither fully adopted nor ultimately sustained - which has in large part been ascribed to inadequate implementation efforts. Culture change to "patient safety culture" (PSC) is among these radical change initiatives, where results to date have been mixed at best. This paper responds to calls for research that focus on explicating factors that affect efforts to implement radical change in healthcare contexts, and focuses on PSC as the radical change implementation. Specifically, this paper offers a novel conceptual model based on Organizational Learning Theory to explain the ability of middle managers in healthcare organizations to influence patient safety culture change. We propose that middle managers can capitalize on their unique position between upper and lower levels in the organization and engage in 'ambidextrous' learning that is critical to implementing and sustaining radical change. This organizational learning perspective offers an innovative way of framing the mid-level managers' role, through both explorative and exploitative activities, which further considers the necessary organizational context in which they operate.

Certifying leaders? high-quality management practices and healthy organisations: an ISO-9000 based standardisation approach.

Science.gov (United States)

Montano, Diego

2016-08-05

The present study proposes a set of quality requirements to management practices by taking into account the empirical evidence on their potential effects on health, the systemic nature of social organisations, and the current conceptualisations of management functions within the framework of comprehensive quality management systems. Systematic reviews and meta-analyses focusing on the associations between leadership and/or supervision and health in occupational settings are evaluated, and the core elements of an ISO 9001 standardisation approach are presented. Six major occupational health requirements to high-quality management practices are identified pertaining to communication processes, organisational justice, role clarity, decision making, social influence processes and management support. It is concluded that the quality of management practices may be improved by developing a quality management system of management practices that ensures not only conformity to product but also to occupational safety and health requirements. Further research may evaluate the practicability of the proposed approach.

Implementation of cold risk management in occupational safety, occupational health and quality practices. Evaluation of a development process and its effects at the finnish maritime administration.

Science.gov (United States)

Risikko, Tanja; Remes, Jouko; Hassi, Juhani

2008-01-01

Cold is a typical environmental risk factor in outdoor work in northern regions. It should be taken into account in a company's occupational safety, health and quality systems. A development process for improving cold risk management at the Finnish Maritime Administration (FMA) was carried out by FMA and external experts. FMA was to implement it. Three years after the development phase, the outcomes and implementation were evaluated. The study shows increased awareness about cold work and few concrete improvements. Concrete improvements in occupational safety and health practices could be seen in the pilot group. However, organization-wide implementation was insufficient, the main reasons being no organization-wide practices, unclear process ownership, no resources and a major reorganization process. The study shows a clear need for expertise supporting implementation. The study also presents a matrix for analyzing the process.

Research priorities for coordinating management of food safety and water quality.

Science.gov (United States)

Crohn, David M; Bianchi, Mary L

2008-01-01

Efforts to exclude disease organisms from farms growing irrigated lettuce and leafy vegetables on California's central coast are conflicting with traditionally accepted strategies to protect surface water quality. To begin resolving this dilemma, over 100 officials, researchers, and industry representatives gathered in April 2007 to set research priorities that could lead to effective co-management of both food safety and water quality. Following the meeting, research priorities were refined and ordered by way of a Delphi process completed by 35 meeting participants. Although water quality and food safety experts conceptualized the issues differently, there were no deep disagreements with respect to research needs. Top priority was given to investigating the fate of pathogens potentially present on farms. Intermediate priorities included characterizing the influence of specific farm management practices on food safety and improving our understanding of vector processes. A scientific subdiscipline focusing on competing risks is needed to characterize and resolve conflicts between human and environmental health.

Evaluation of the Quality of Occupational Health and Safety Management Systems Based on Key Performance Indicators in Certified Organizations

OpenAIRE

Iraj Mohammadfam; Mojtaba Kamalinia; Mansour Momeni; Rostam Golmohammadi; Yadollah Hamidi; Alireza Soltanian

2017-01-01

Background: Occupational Health and Safety Management Systems are becoming more widespread in organizations. Consequently, their effectiveness has become a core topic for researchers. This paper evaluates the performance of the Occupational Health and Safety Assessment Series 18001 specification in certified companies in Iran. Methods: The evaluation is based on a comparison of specific criteria and indictors related to occupational health and safety management practices in three certified...

Safety culture and subcontractor network governance in a complex safety critical project

International Nuclear Information System (INIS)

Oedewald, Pia; Gotcheva, Nadezhda

2015-01-01

In safety critical industries many activities are currently carried out by subcontractor networks. Nevertheless, there are few studies where the core dimensions of resilience would have been studied in safety critical network activities. This paper claims that engineering resilience into a system is largely about steering the development of culture of the system towards better ability to anticipate, monitor, respond and learn. Thus, safety culture literature has relevance in resilience engineering field. This paper analyzes practical and theoretical challenges in applying the concept of safety culture in a complex, dynamic network of subcontractors involved in the construction of a new nuclear power plant in Finland, Olkiluoto 3. The concept of safety culture is in focus since it is widely used in nuclear industry and bridges the scientific and practical interests. This paper approaches subcontractor networks as complex systems. However, the management model of the Olkiluoto 3 project is to a large degree a traditional top-down hierarchy, which creates a mismatch between the management approach and the characteristics of the system to be managed. New insights were drawn from network governance studies. - Highlights: • We studied a relevant topical subject safety culture in nuclear new build project. • We integrated safety science challenges and network governance studies. • We produced practicable insights in managing safety of subcontractor networks

Responsible Management for Health, Safety and Environment (HSE) in Uranium Mining & Mineral Processing Projects

International Nuclear Information System (INIS)

Saint-Pierre, Sylvain

2014-01-01

If management is adequate for conventional HSE risk, the bulk of the job should be taken care of Good practices are already well known for the remaining risk, including radiation safety Radiation should be addressed in a proportionate manner as part of overall HSE management. However, public expectations are probably the highest for radiation, wastes, discharges, etc.

Risk management and safety

International Nuclear Information System (INIS)

Niehaus, F.; Novegno, A.

1985-01-01

Risk assessment, including probabilistic analyses, has made great progress over the past decade. In spite of the inherent uncertainties it has now become possible to utilize methods and results for decision making at various levels. This paper will, therefore, review risk management in industrial installations, risk management for energy safety policy and prospects of risk management in highly industrialized areas. (orig.) [de

Workplace safety management as correlates of wellbeing among ...

African Journals Online (AJOL)

Workplace safety management as correlates of wellbeing among factory ... working in manufacturing firms do not enjoy the desirable level of wellbeing ... Keywords: employees' wellbeing, safety management, workers safety training, design of ...

Safety management in the industry

International Nuclear Information System (INIS)

Jaecklin, A.

1996-01-01

The safety management in the industry is characterised by the large number of processes and the materials used in them. Correspondingly large are the legal regulations. Through the thickets of today's controls, the industry moves inside a relatively tight network of technical regulations. The experience of environmental audits and industrial damage, however, shows that the greatest deficit lies in the organisational methods and less on the technical side. For the overcoming of risks one needs to recognise the weaknesses of a careful analysis. To this belongs the estimation of how far a possible scenario can be taken. The estimation of the possibilities of occurrence, however, comes up against particular problems in the industry, as the human factor in relationship with danger potentialities is very difficult to evaluate. Actual basic data or statistics are missing. This lack can only be made good with the building up of a safety management. The fundamental principles of such a management can be taken from the environmental management and especially from the standard for environmental management ISO 14001. Here it is important that safety management is integrated into the process-oriented business processes and thus becomes a part of the company culture. (author) 11 figs., tabs., 11 refs

Pedestrian safety management using the risk-based approach

Directory of Open Access Journals (Sweden)

Romanowska Aleksandra

2017-01-01

Full Text Available The paper presents a concept of a multi-level pedestrian safety management system. Three management levels are distinguished: strategic, tactical and operational. The basis for the proposed approach to pedestrian safety management is a risk-based method. In the approach the elements of behavioural and systemic theories were used, allowing for the development of a formalised and repeatable procedure integrating the phases of risk assessment and response to the hazards of road crashes involving pedestrians. Key to the method are tools supporting pedestrian safety management. According to the risk management approach, the tools can be divided into two groups: tools supporting risk assessment and tools supporting risk response. In the paper attention is paid to selected tools supporting risk assessment, with particular emphasis on the methods for estimating forecasted pedestrian safety measures (at strategic, national and regional level and identification of particularly dangerous locations in terms of pedestrian safety at tactical (regional and local and operational level. The proposed pedestrian safety management methods and tools can support road administration in making rational decisions in terms of road safety, safety of road infrastructure, crash elimination measures or reducing the consequences suffered by road users (particularly pedestrians as a result of road crashes.

Resolution no. 15/2012 Safety Guide for the practice of nuclear meters

International Nuclear Information System (INIS)

2012-01-01

1. This guide is Intended to complement the requirements for practice Nuclear meters out in September: • Joint Resolution CITMA-MINSAP Regulation Basic Standards Radiation safety of November 30, 2001, hereinafter NBS. • CITMA Resolution 121/2000, Regulations for the Safe Transport Radioactive Materials; hereinafter transport regulations. • Resolution 35/2003 of CITMA Regulation for the safe management of Radioactive waste of March 7, 2003, hereinafter Regulation waste. • Joint Resolution CITMA-MINSAP Regulations for the Selection, Training Authorization and Associated Personnel performing Employment Practices of Ionizing Radiation of December 19, 2003, hereinafter Staff Rules. 2. The requirements of this guide are applicable to entities and performing practice-related activities Nuclear Meters throughout the national territory.

Assessment and management of ageing of major nuclear power plant components important to safety: CANDU reactor assemblies

International Nuclear Information System (INIS)

2001-02-01

At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g. caused by unanticipated phenomena and by operating, maintenance, design or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must therefore be effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wearout of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers, and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness for service) and the inspection, monitoring, and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs) including the Soviet designed water moderated and water cooled energy reactors (WWERs), are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age-related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which

Assessment and Management of ageing of major nuclear power plant components important to safety: PWR pressure vessels

International Nuclear Information System (INIS)

1999-10-01

At present, there are over four hundred operational nuclear power plants (NPPs) in IAEA Member States. Operating experience has shown that ineffective control of the ageing degradation of the major NPP components (e.g., caused by unanticipated phenomena and by operating, maintenance or manufacturing errors) can jeopardize plant safety and also plant life. Ageing in these NPPs must be therefore effectively managed to ensure the availability of design functions throughout the plant service life. From the safety perspective, this means controlling within acceptable limits the ageing degradation and wear-out of plant components important to safety so that adequate safety margins remain, i.e. integrity and functional capability in excess of normal operating requirements. This TECDOC is one in a series of reports on the assessment and management of ageing of the major NPP components important to safety. The reports are based on experience and practices of NPP operators, regulators, designers, manufacturers and technical support organizations and a widely accepted Methodology for the Management of Ageing of NPP Components Important to Safety which was issued by the IAEA in 1992. The current practices for the assessment of safety margins (fitness-for-service) and the inspection, monitoring and mitigation of ageing degradation of selected components of Canada deuterium-uranium (CANDU) reactors, boiling water reactors (BWRs), pressurized water reactors (PWRs), including water moderated, water cooled energy reactors (WWERs) are documented in the reports. These practices are intended to help all involved directly and indirectly in ensuring the safe operation of NPPs; and also to provide a common technical basis for dialogue between plant operators and regulators when dealing with age related licensing issues. Since the reports are written from a safety perspective, they do not address life or life-cycle management of the plant components, which involves the integration of

Receptionist input to quality and safety in repeat prescribing in UK general practice: ethnographic case study.

Science.gov (United States)

Swinglehurst, Deborah; Greenhalgh, Trisha; Russell, Jill; Myall, Michelle

2011-11-03

To describe, explore, and compare organisational routines for repeat prescribing in general practice to identify contributors and barriers to safety and quality. Ethnographic case study. Four urban UK general practices with diverse organisational characteristics using electronic patient records that supported semi-automation of repeat prescribing. 395 hours of ethnographic observation of staff (25 doctors, 16 nurses, 4 healthcare assistants, 6 managers, and 56 reception or administrative staff), and 28 documents and other artefacts relating to repeat prescribing locally and nationally. Potential threats to patient safety and characteristics of good practice. Observation of how doctors, receptionists, and other administrative staff contributed to, and collaborated on, the repeat prescribing routine. Analysis included mapping prescribing routines, building a rich description of organisational practices, and drawing these together through narrative synthesis. This was informed by a sociological model of how organisational routines shape and are shaped by information and communications technologies. Results Repeat prescribing was a complex, technology-supported social practice requiring collaboration between clinical and administrative staff, with important implications for patient safety. More than half of requests for repeat prescriptions were classed as "exceptions" by receptionists (most commonly because the drug, dose, or timing differed from what was on the electronic repeat list). They managed these exceptions by making situated judgments that enabled them (sometimes but not always) to bridge the gap between the idealised assumptions about tasks, roles, and interactions that were built into the electronic patient record and formal protocols, and the actual repeat prescribing routine as it played out in practice. This work was creative and demanded both explicit and tacit knowledge. Clinicians were often unaware of this input and it did not feature in policy

Understanding the application of knowledge management to the safety critical facilities

International Nuclear Information System (INIS)

Ilina, Elena

2010-01-01

Challenges to the operating nuclear power plants and transport infrastructures are outlined. It is concluded that most aggravating factors are related to knowledge. Thus, of necessity, effective knowledge management is required. Knowledge management theories are reviewed in their historical perspective as a natural extension and unification of information theories and theories about learning. The first line is identified with names as Wiener, Ashby, Shannon, Jaynes, Dretske, Harkevich. The second line - with Vygotsky, Engestroem, Carayannis. The recent developments of knowledge management theorists as Davenport, Prusak, Drew, Wiig, Zack are considered stressing learning, retaining of knowledge, approaching the state awareness of awareness, and alignment of knowledge management with the strategy of the concerned organizations. Further, some of the details and results are presented of what is achieved so far. More specifically, knowledge management tools are applied to the practical work activities as event reporting, data collection, condition assessment, verification of safety functions and incident investigation. Obstacles are identified and improvements are proposed. Finally, it is advised to continue to implement and further develop knowledge management tools in the organizations involved in various aspects of safety critical facilities

Evaluating SafeClub: can risk management training improve the safety activities of community soccer clubs?

Science.gov (United States)

Abbott, K; Klarenaar, P; Donaldson, A; Sherker, S

2008-06-01

To evaluate a sports safety-focused risk-management training programme. Controlled before and after test. Four community soccer associations in Sydney, Australia. 76 clubs (32 intervention, 44 control) at baseline, and 67 clubs (27 intervention, 40 control) at post-season and 12-month follow-ups. SafeClub, a sports safety-focused risk-management training programme (3x2 hour sessions) based on adult-learning principles and injury-prevention concepts and models. Changes in mean policy, infrastructure and overall safety scores as measured using a modified version of the Sports Safety Audit Tool. There was no significant difference in the mean policy, infrastructure and overall safety scores of intervention and control clubs at baseline. Intervention clubs achieved higher post-season mean policy (11.9 intervention vs 7.5 controls), infrastructure (15.2 vs 10.3) and overall safety (27.0 vs 17.8) scores than did controls. These differences were greater at the 12-month follow-up: policy (16.4 vs 7.6); infrastructure (24.7 vs 10.7); and overall safety (41.1 vs 18.3). General linear modelling indicated that intervention clubs achieved statistically significantly higher policy (prisk-management practice, in a sustainable way.

Putting into practice error management theory: Unlearning and learning to manage action errors in construction.

Science.gov (United States)

Love, Peter E D; Smith, Jim; Teo, Pauline

2018-05-01

Error management theory is drawn upon to examine how a project-based organization, which took the form of a program alliance, was able to change its established error prevention mindset to one that enacted a learning mindfulness that provided an avenue to curtail its action errors. The program alliance was required to unlearn its existing routines and beliefs to accommodate the practices required to embrace error management. As a result of establishing an error management culture the program alliance was able to create a collective mindfulness that nurtured learning and supported innovation. The findings provide a much-needed context to demonstrate the relevance of error management theory to effectively address rework and safety problems in construction projects. The robust theoretical underpinning that is grounded in practice and presented in this paper provides a mechanism to engender learning from errors, which can be utilized by construction organizations to improve the productivity and performance of their projects. Copyright © 2018 Elsevier Ltd. All rights reserved.

A Practical Application Combining Wireless Sensor Networks and Internet of Things: Safety Management System for Tower Crane Groups

Directory of Open Access Journals (Sweden)

Dexing Zhong

2014-07-01

Full Text Available The so-called Internet of Things (IoT has attracted increasing attention in the field of computer and information science. In this paper, a specific application of IoT, named Safety Management System for Tower Crane Groups (SMS-TC, is proposed for use in the construction industry field. The operating status of each tower crane was detected by a set of customized sensors, including horizontal and vertical position sensors for the trolley, angle sensors for the jib and load, tilt and wind speed sensors for the tower body. The sensor data is collected and processed by the Tower Crane Safety Terminal Equipment (TC-STE installed in the driver’s operating room. Wireless communication between each TC-STE and the Local Monitoring Terminal (LMT at the ground worksite were fulfilled through a Zigbee wireless network. LMT can share the status information of the whole group with each TC-STE, while the LMT records the real-time data and reports it to the Remote Supervision Platform (RSP through General Packet Radio Service (GPRS. Based on the global status data of the whole group, an anti-collision algorithm was executed in each TC-STE to ensure the safety of each tower crane during construction. Remote supervision can be fulfilled using our client software installed on a personal computer (PC or smartphone. SMS-TC could be considered as a promising practical application that combines a Wireless Sensor Network with the Internet of Things.

A Practical Application Combining Wireless Sensor Networks and Internet of Things: Safety Management System for Tower Crane Groups

Science.gov (United States)

Zhong, Dexing; Lv, Hongqiang; Han, Jiuqiang; Wei, Quanrui

2014-01-01

The so-called Internet of Things (IoT) has attracted increasing attention in the field of computer and information science. In this paper, a specific application of IoT, named Safety Management System for Tower Crane Groups (SMS-TC), is proposed for use in the construction industry field. The operating status of each tower crane was detected by a set of customized sensors, including horizontal and vertical position sensors for the trolley, angle sensors for the jib and load, tilt and wind speed sensors for the tower body. The sensor data is collected and processed by the Tower Crane Safety Terminal Equipment (TC-STE) installed in the driver's operating room. Wireless communication between each TC-STE and the Local Monitoring Terminal (LMT) at the ground worksite were fulfilled through a Zigbee wireless network. LMT can share the status information of the whole group with each TC-STE, while the LMT records the real-time data and reports it to the Remote Supervision Platform (RSP) through General Packet Radio Service (GPRS). Based on the global status data of the whole group, an anti-collision algorithm was executed in each TC-STE to ensure the safety of each tower crane during construction. Remote supervision can be fulfilled using our client software installed on a personal computer (PC) or smartphone. SMS-TC could be considered as a promising practical application that combines a Wireless Sensor Network with the Internet of Things. PMID:25196106

A practical application combining wireless sensor networks and Internet of Things: Safety Management System for Tower Crane Groups.

Science.gov (United States)

Zhong, Dexing; Lv, Hongqiang; Han, Jiuqiang; Wei, Quanrui

2014-07-30

The so-called Internet of Things (IoT) has attracted increasing attention in the field of computer and information science. In this paper, a specific application of IoT, named Safety Management System for Tower Crane Groups (SMS-TC), is proposed for use in the construction industry field. The operating status of each tower crane was detected by a set of customized sensors, including horizontal and vertical position sensors for the trolley, angle sensors for the jib and load, tilt and wind speed sensors for the tower body. The sensor data is collected and processed by the Tower Crane Safety Terminal Equipment (TC-STE) installed in the driver's operating room. Wireless communication between each TC-STE and the Local Monitoring Terminal (LMT) at the ground worksite were fulfilled through a Zigbee wireless network. LMT can share the status information of the whole group with each TC-STE, while the LMT records the real-time data and reports it to the Remote Supervision Platform (RSP) through General Packet Radio Service (GPRS). Based on the global status data of the whole group, an anti-collision algorithm was executed in each TC-STE to ensure the safety of each tower crane during construction. Remote supervision can be fulfilled using our client software installed on a personal computer (PC) or smartphone. SMS-TC could be considered as a promising practical application that combines a Wireless Sensor Network with the Internet of Things.

Canadian Consumer Food Safety Practices and Knowledge: Foodbook Study.

Science.gov (United States)

Murray, Regan; Glass-Kaastra, Shiona; Gardhouse, Christine; Marshall, Barbara; Ciampa, Nadia; Franklin, Kristyn; Hurst, Matt; Thomas, M Kate; Nesbitt, Andrea

2017-10-01

Understanding consumers' food safety practices and knowledge supports food safety education for the prevention of foodborne illness. The objective of this study was to describe Canadian consumer food safety practices and knowledge. This study identifies demographic groups for targeted food safety education messaging and establishes a baseline measurement to assess the effectiveness of food safety interventions over time. Questions regarding consumer food safety practices and knowledge were included in a population-based telephone survey, Foodbook, conducted from November 2014 to March 2015. The results were analyzed nationally by age group and by gender. The results showed that approximately 90% of Canadians reported taking the recommended cleaning and separating precautions when handling raw meat to prevent foodborne illness. Only 29% of respondents reported using a food thermometer when cooking any meat, and even fewer (12%) reported using a food thermometer for small cuts of meat such as chicken pieces. The majority (>80%) of Canadians were aware of the foodborne illness risks related to chicken and hamburger, but fewer (poultry.