Introduction to the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management and Canada's participation

International Nuclear Information System (INIS)

Mecke, J.L.

2011-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) is the first and the only legally binding international instrument to address safety issues concerning the management of spent fuel and radioactive waste on a global scale. It entered into force on June 18, 2001. The Government of Canada strongly supported international efforts to bring into force the Joint Convention and was the second country to ratify it. The Joint Convention is an 'incentive instrument' that is based on peer review (similar in that respect to the Convention on Nuclear Safety) and devised to encourage countries that are Contracting Parties to report and to foster open and frank discussions on the safety of spent fuel and radioactive waste management. Being an incentive convention, it is not designed to mandate Contracting Parties to fulfill its obligation through control and sanction, but it is based on the common objectives of Contracting Parties to achieve and maintain a high level of safety in spent fuel and radioactive waste management, protect individuals, society and the environment from ionizing radiation and prevent accidents and if necessary mitigating the consequences of such accidents. The following paper will provide an introduction to the Joint Convention and provide a summary of Canada's peer review at the most recent Review Meeting which was held on May 11-20, 2009, at the International Atomic Energy Agency (IAEA) headquarters in Vienna, Austria. (author)

Increased introduction, advertising, and sales of preventive drugs during 1986-2002 in Sweden.

Science.gov (United States)

Nilsson, J Lars G; Melander, Arne

2006-01-01

The objective of this study was to survey how introduction of new drugs and promotional activities influence drug sales in Sweden. All drugs on the Swedish market were categorized as curative, symptom-alleviating, substitutive, or preventive. The number of new drugs introduced, drug sales in volume and value, and the number of drug advertisements appearing in the major Swedish medical journal during 1986-2002 were determined for each of the 4 drug categories. Between 1986 and 1998, the relative shares of the 4 drug categories were relatively constant. From 1998 to 2002, the share of new preventive drugs increased from 24% to 30%, their share of advertisements increased from 20% to 35%, and their sales value increased from 25% to 30%. During the same period, the shares of other drugs decreased correspondingly. Pharmaceutical companies have shifted their attention to the introduction, advertising, and sales of preventive drugs in an attempt to exploit preventive medicine. This might lead to waste of resources when expensive preventive drugs are used by numerous patients over many years, as the benefit of preventive drugs for the individual patient cannot be judged easily.

Study on application of safety checklist in preventive maintenance activities

International Nuclear Information System (INIS)

Shi Jin; Chen Song; Liu Jingquan

2013-01-01

The paper describes the principles and the characteristics of safety checklist as a risk evaluation method. Examples of application of safety checklists to preventive maintenance activities such as criteria comparison and checkup items in place in nuclear power plants are illustrated in details with issues appeared in the checklist establishment. Checklist has a good application in the RCM analysis or in the actual preventive maintenance program for Chashma Nuclear Power Plant indicated by concrete instances. In the light of safety checklist which is used to sustain preventive maintenance as a simple and applicable risk analysis approach, we can get deep knowledge of risks of nuclear power plant to perfect preventive maintenance activities. (authors)

Domain 2: Sport Safety and Injury Prevention

Science.gov (United States)

Gurchiek, Larry; Mokha, Monique Butcher

2004-01-01

Most coaches recognize the importance of creating a safe environment and preventing injuries of their athletes. Domain 2 is dedicated to this important aspect of coaching, and outlines specific areas within safety and injury prevention that coaches should address. Domain 2 sets the standards for facility, equipment, and environmental safety…

Lifting Safety: Tips To Help Prevent Back Injuries

Science.gov (United States)

... Prevent Back Injuries Lifting Safety: Tips to Help Prevent Back Injuries Share Print Back injuries are common problems at work, home, and play. They can be caused by accidents or improper lifting technique. Below are tips to ...

African Safety Promotion: A Journal of Injury and Violence Prevention

African Journals Online (AJOL)

African Safety Promotion: A Journal of Injury and Violence Prevention (ASP) is a forum for discussion and debate among scholars, policy-makers and practitioners active in the field of injury prevention and safety promotion. ASP seeks to promote research and dialogue around a central public health issue that affects Africa, ...

Major accident prevention through applying safety knowledge management approach.

Science.gov (United States)

Kalatpour, Omid

2016-01-01

Many scattered resources of knowledge are available to use for chemical accident prevention purposes. The common approach to management process safety, including using databases and referring to the available knowledge has some drawbacks. The main goal of this article was to devise a new emerged knowledge base (KB) for the chemical accident prevention domain. The scattered sources of safety knowledge were identified and scanned. Then, the collected knowledge was formalized through a computerized program. The Protégé software was used to formalize and represent the stored safety knowledge. The domain knowledge retrieved as well as data and information. This optimized approach improved safety and health knowledge management (KM) process and resolved some typical problems in the KM process. Upgrading the traditional resources of safety databases into the KBs can improve the interaction between the users and knowledge repository.

Development and application of an integrated evaluation framework for preventive safety applications

NARCIS (Netherlands)

Scholliers, J.; Joshi, S.; Gemou, M.; Hendriks, F.; Ljung Aust, M.; Luoma, J.; Netto, M.; Engstrom, J.; Leanderson Olsson, S.; Kutzner, R.; Tango, F.; Amditis, A.J.; Blosseville, J.M.; Bekiaris, E.

2011-01-01

Preventive safety functions help drivers avoid or mitigate accidents. No quantitative methods have been available to evaluate the safety impact of these systems. This paper describes a framework for the assessment of preventive and active safety functions, which integrates procedures for technical

What are the beliefs of pediatricians and dietitians regarding complementary food introduction to prevent allergy?

Directory of Open Access Journals (Sweden)

Leo Sara

2012-03-01

Full Text Available Abstract Background The timing of complementary food introduction is controversial. Providing information on the timing of dietary introduction is crucial to the primary prevention of food allergy. The American Academy of Pediatrics offers dietary recommendations that were updated in 2008. Objective Identify the recommendations that general pediatricians and registered dietitians provide to parents and delineate any differences in counselling. Methods A 9-item survey was distributed to pediatricians and dietitians online and by mail. Information on practitioner type, gender, length of practice and specific recommendations regarding complementary food introduction and exposure was collected. Results 181 surveys were returned with a 54% response rate from pediatricians. It was not possible to calculate a meaningful dietitian response rate due to overlapping email databases. 52.5% of all respondents were pediatricians and 45.9% were dietitians. The majority of pediatricians and dietitians advise mothers that peanut abstinence during pregnancy and lactation is unnecessary. Dietitians were more likely to counsel mothers to breastfeed their infants to prevent development of atopic dermatitis than pediatricians. Hydrolyzed formulas for infants at risk of developing allergy were the top choice of formula amongst both practitioners. For food allergy prevention, pediatricians were more likely to recommend delayed introduction of peanut and egg, while most dietitians recommended no delay in allergenic food introduction. Conclusions In the prophylaxis of food allergy, pediatricians are less aware than dietitians of the current recommendation that there is no benefit in delaying allergenic food introduction beyond 4 to 6 months. More dietitians than pediatricians believe that breastfeeding decreases the risk of atopic dermatitis. Practitioners may benefit from increased awareness of current guidelines.

Safety assurance logic techniques for evaluation of accident prevention and mitigation

International Nuclear Information System (INIS)

McWethy, L.M.; Hagan, J.W.

1976-01-01

Safety assurance methods have been developed and applied in reactor safety assessments of FFTF. These methods promote visibility of the total safety provided by the plant, both in prevention of off-normal or accident conditions as well as provision of various features which terminate conditions within acceptable bounds if such conditions should occur. One of the primary techniques applied in safety assurance is the development of safety assurance diagrams. These diagrams explicitly identify the multiple lines of defense which prevent accident progression. The diagrams graphically demonstrate the defense-in-depth provided by the plant for each postulated occurrence. Lines of defense are shown against ever having an occurrence in the first place; thus giving appropriate emphasis on accident prevention, and visibility to the designer's role in promoting this level of safety. These diagrams, or accident process trees, also show graphically the various paths of postulated accident progression to their logical termination. Evaluation of the importance and strength of each line-of-defense assures fulfillment of the safety objectives of the overall plant system

ALLERGY PREVENTION IN CHILDREN DURING THE INTRODUCTION OF COMPLEMENTARY FEEDING PRODUCTS

Directory of Open Access Journals (Sweden)

Т. V. Turti

2014-01-01

Full Text Available The article covers modern approaches to the prevention of allergic diseases in children. We discuss the most common food allergens in the early childhood, main mechanisms of food tolerance formation and opportunities of dietary preventive measures in a risk group of the allergy development. One of the important issues, in practical terms, is the question of time and peculiarities of the complementary feeding introduction in this category of children. The own experience of use of hypoallergenic complementary feeding products in children from the risk group and with mild manifestations of atopy is presented.

Advertising Efficiency in Road Safety Prevention Campaigns

Directory of Open Access Journals (Sweden)

Julia Catalina Serrano Cordero

2017-11-01

Full Text Available This paper addresses the importance of the results evaluation processes in the education and road safety campaigns, although they have achieved remarkable progress in praxis, evidenced a lack of information as to the relevance and suitability of the tools of communication in prevention. The objective was to validate an education and road safety campaign implemented by the Municipal Transit and Transport Company of the city of Cuenca (Ecuador in 2014, for which qualitative and quantitative techniques were used, choosing a stratified probabilistic sample of 304 university students, (age: 15-39. The data collection instruments were: focus group, questionnaire and statistical records, interpreted through content analysis and descriptive statistics. The findings indicate that the most frequent perception about the causes of accidents is: alcohol consumption, speeding, cell phone use. Likewise, the campaign "Best to Prevent" obtained a level of generalized recognition, but it was the younger ones who received more influence of their content of communication. Results that corroborate that the methods of motivation and persuasion do affect the attitude changes, which influences the transformation towards a culture of road prevention.

Pre-Exposure Prophylaxis for HIV Prevention: Safety Concerns.

Science.gov (United States)

Tetteh, Raymond A; Yankey, Barbara A; Nartey, Edmund T; Lartey, Margaret; Leufkens, Hubert G M; Dodoo, Alexander N O

2017-04-01

Available evidence supports the efficacy of pre-exposure prophylaxis (PrEP) in decreasing the incidence of human immunodeficiency virus (HIV) infection among high-risk individuals, especially when used in combination with other behavioural preventive methods. Safety concerns about PrEP present challenges in the implementation and use of PrEP. The aim of this review is to discuss safety concerns observed in completed clinical trials on the use of PrEP. We performed a literature search on PrEP in PubMed, global advocacy for HIV prevention (Aids Vaccine Advocacy Coalition) database, clinical trials registry " http://www.clinicaltrials.gov " and scholar.google, using combination search terms 'pre-exposure prophylaxis', 'safety concerns in the use of pre-exposure prophylaxis', 'truvada use as PrEP', 'guidelines for PrEP use', 'HIV pre-exposure prophylaxis' and 'tenofovir' to identify clinical trials and literature on PrEP. We present findings associated with safety issues on the use of PrEP based on a review of 11 clinical trials on PrEP with results on safety and efficacy as at April 2016. We also reviewed findings from routine real-life practice reports. The pharmacological intervention for PrEP was tenofovir disoproxil fumarate/emtricitabine in a combined form as Truvada ® or tenofovir as a single entity. Both products are efficacious for PrEP and seem to have a good safety profile. Regular monitoring is recommended to prevent long-term toxic effects. The main adverse effects observed with PrEP are gastrointestinal related; basically mild to moderate nausea, vomiting and diarrhea. Other adverse drug effects worth monitoring are liver enzymes, renal function and bone mineral density. PrEP as an intervention to reduce HIV transmission appears to have a safe benefit-risk profile in clinical trials. It is recommended for widespread use but adherence monitoring and real-world safety surveillance are critical in the post-marketing phase to ensure that the benefits

[Patient safety and errors in medicine: development, prevention and analyses of incidents].

Science.gov (United States)

Rall, M; Manser, T; Guggenberger, H; Gaba, D M; Unertl, K

2001-06-01

"Patient safety" and "errors in medicine" are issues gaining more and more prominence in the eyes of the public. According to newer studies, errors in medicine are among the ten major causes of death in association with the whole area of health care. A new era has begun incorporating attention to a "systems" approach to deal with errors and their causes in the health system. In other high-risk domains with a high demand for safety (such as the nuclear power industry and aviation) many strategies to enhance safety have been established. It is time to study these strategies, to adapt them if necessary and apply them to the field of medicine. These strategies include: to teach people how errors evolve in complex working domains and how types of errors are classified; the introduction of critical incident reporting systems that are free of negative consequences for the reporters; the promotion of continuous medical education; and the development of generic problem-solving skills incorporating the extensive use of realistic simulators wherever possible. Interestingly, the field of anesthesiology--within which realistic simulators were developed--is referred to as a model for the new patient safety movement. Despite this proud track record in recent times though, there is still much to be done even in the field of anesthesiology. Overall though, the most important strategy towards a long-term improvement in patient safety will be a change of "culture" throughout the entire health care system. The "culture of blame" focused on individuals should be replaced by a "safety culture", that sees errors and critical incidents as a problem of the whole organization. The acceptance of human fallability and an open-minded non-punitive analysis of errors in the sense of a "preventive and proactive safety culture" should lead to solutions at the systemic level. This change in culture can only be achieved with a strong commitment from the highest levels of an organization. Patient

Application of system safety engineering techniques for hazard prevention at the Superconducting Super Collider

International Nuclear Information System (INIS)

Hendrix, B.L.

1991-01-01

A primary goal of the Superconducting Super Collider Laboratory (SSCL) is to establish an exemplary safety program. Achieving this goal requires leadership, planning, coordination, and technical know-how. To ensure that safety is an inherent part of the design, the Environment, Safety and Health Office employs a systems engineering discipline and process known as System Safety. The goal of System Safety - hazard prevention - is accomplished by analyzing systems to identify hazards and to evaluate design and procedural options and countermeasures to prevent, eliminate, mitigate, or control hazards and risks. Establishment of safety and human factors design criteria at the outset of the project prevents unsafe designs and safety violations, reduces risks, and helps in avoiding costly design changes later. This process requires a considerable amount of coordination with a variety of technical disciplines and safety professionals to integrate methods of hazard prevention, mitigation, and risk reduction throughout the system life-cycle

Working Safety in Confined Spaces. Module SH-32. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on working safely in confined spaces in one of 50 modules concerned with job safety and health. This module explains how to recognize potential hazards in confined spaces, how to deal with these hazards, and how planning can prevent accidents. Following the introduction, 17 objectives (each keyed to a page in the text) the…

Time-space structure of nuclear safety

International Nuclear Information System (INIS)

Miya, Kenzo

2003-01-01

New idea to analyze the structure of nuclear safety and to investigate functioning property of hierarchical principle is applied to nuclear safety in this paper. The nuclear safety is expressed by three principles such as 1) the action and subject are partitioned and classified by time and space, 2) introduction of hierarchy with three strata to the closed object and hierarchy with many strata to the open object and 3) application of 'element, relation and abstraction' to the engineering system as a framework of intellectual activity. For example, prevention of core melt is the closed object and it is obtained by acting hierarchies with three strata (operation stop, cooling and closing radiation) as the safety functions. Prevention of increase of accident is open object, so that, space hierarchy with many strata of prevention is used for the safety security of reactor. The safety security method of reactor consists of three processes, that is 1) the basic process to make clear the continuous operating time on the basis of regular inspection, 2) the action process of operating ECCS to prevent core damage accident, when a large leakage happens and 3) many strata prevention process of stopping a leak in the environment. (S.Y.)

Small is Beautiful? Firm's Size, Prevention & Food Safety.

OpenAIRE

Rouviere, Elodie; Soubeyran, Raphael

2012-01-01

The European General Food Law of 2005 and the newly promulgated FDA Food Safety Modernization Act (FFSMA) of 2010 ask all food operators to implement preventive efforts. In this article, we explore the link between firm’s size and preventive efforts. We show two main results. First, when there is no cross-contamination, small firms will provide higher preventive efforts than large firms. When there is crosscontamination, the effort-size curve may have a "inverted-U" shape. From our results we...

Quantitative assessment of safety barrier performance in the prevention of domino scenarios triggered by fire

International Nuclear Information System (INIS)

Landucci, Gabriele; Argenti, Francesca; Tugnoli, Alessandro; Cozzani, Valerio

2015-01-01

The evolution of domino scenarios triggered by fire critically depends on the presence and the performance of safety barriers that may have the potential to prevent escalation, delaying or avoiding the heat-up of secondary targets. The aim of the present study is the quantitative assessment of safety barrier performance in preventing the escalation of fired domino scenarios. A LOPA (layer of protection analysis) based methodology, aimed at the definition and quantification of safety barrier performance in the prevention of escalation was developed. Data on the more common types of safety barriers were obtained in order to characterize the effectiveness and probability of failure on demand of relevant safety barriers. The methodology was exemplified with a case study. The results obtained define a procedure for the estimation of safety barrier performance in the prevention of fire escalation in domino scenarios. - Highlights: • We developed a methodology for the quantitative assessment of safety barriers. • We focused on safety barriers aimed at preventing domino effect triggered by fire. • We obtained data on effectiveness and availability of the safety barriers. • The methodology was exemplified with a case study of industrial interest. • The results showed the role of safety barriers in preventing fired domino escalation

The relationships between OHS prevention costs, safety performance, employee satisfaction and accident costs.

Science.gov (United States)

Bayram, Metin; Ünğan, Mustafa C; Ardıç, Kadir

2017-06-01

Little is known about the costs of safety. A literature review conducted for this study indicates there is a lack of survey-based research dealing with the effects of occupational health and safety (OHS) prevention costs. To close this gap in the literature, this study investigates the interwoven relationships between OHS prevention costs, employee satisfaction, OHS performance and accident costs. Data were collected from 159 OHS management system 18001-certified firms operating in Turkey and analyzed through structural equation modeling. The findings indicate that OHS prevention costs have a significant positive effect on safety performance, employee satisfaction and accident costs savings; employee satisfaction has a significant positive effect on accident costs savings; and occupational safety performance has a significant positive effect on employee satisfaction and accident costs savings. Also, the results indicate that safety performance and employee satisfaction leverage the relationship between prevention costs and accident costs.

Safety-barrier diagrams as a tool for modelling safety of hydrogen applications

DEFF Research Database (Denmark)

Duijm, Nijs Jan; Markert, Frank

2009-01-01

Safety-barrier diagrams have proven to be a useful tool in documenting the safety measures taken to prevent incidents and accidents in process industry. Especially during the introduction of new hydrogen technologies or applications, as e.g. hydrogen refuelling stations, safety-barrier diagrams...... are considered a valuable supplement to other traditional risk analysis tools to support the communication with authorities and other stakeholders during the permitting process. Another advantage of safety-barrier diagrams is that they highlight the importance of functional and reliable safety barriers in any...... system and here is a direct focus on those barriers that need to be subject to safety management in terms of design and installation, operational use, inspection and monitoring, and maintenance. Safety-barrier diagrams support both quantitative and qualitative approaches. The paper will describe...

Formative research to shape HPV vaccine introduction strategies in Peru.

Science.gov (United States)

Bartolini, Rosario M; Drake, Jennifer Kidwell; Creed-Kanashiro, Hilary M; Díaz-Otoya, Margarita M; Mosqueira-Lovón, Nelly Rocío; Penny, Mary E; Winkler, Jennifer L; LaMontagne, D Scott; Bingham, Allison

2010-01-01

To understand the sociocultural environment, health systems' capacities, and policy processes related to cervical cancer and HPV vaccines in order to inform HPV vaccine introduction. Mixed-method formative research using qualitative and quantitative data collection techniques. Participants included girls, parents, community leaders, health and education officials, and policymakers. Respondents, including policymakers, generally supported HPV vaccine introduction, due partly to appreciation for the benefits of vaccination and the desire to prevent cancer. Community-level concerns regarding safety and quality of services will need to be addressed. The immunization system in Peru is strong and has capacity for including the HPV vaccine. Formative research provides key insights to help shape an effective program for HPV vaccine introduction.

How to improve safety of laparoscopic cholecystectomy

Directory of Open Access Journals (Sweden)

ZHANG Yong

2013-06-01

Full Text Available Laparoscopic cholecystectomy (LC has become the "gold standard" of treatment for benign gallbladder disease. This paper summarizes various surgical safety measures used in recent years, and suggests an emphasis on perioperative imaging examination, preoperative prevention of risk factors, training of surgical skills, and introduction of fast-track surgery concept, so as to avoid the incidence of complications and improve the safety of LC.

Safety of antiretroviral drugs in pregnancy and breastfeeding for mother and child

NARCIS (Netherlands)

Newell, Marie-Louise; Bunders, Madeleine J.

2013-01-01

Purpose of reviewThe introduction of combination ART to prevent mother-to-child-transmission (MTCT) has substantially decreased MTCT rates. However, there are concerns regarding safety of ART exposure for the mother, pregnancy outcome and infant. Changing MTCT prevention guidelines, with expanded

29 CFR 1910.301 - Introduction.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Introduction. 1910.301 Section 1910.301 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical General § 1910.301 Introduction. This subpart addresses...

Pre-Exposure Prophylaxis for HIV Prevention : Safety Concerns

NARCIS (Netherlands)

Tetteh, Raymond A; Yankey, Barbara A; Nartey, Edmund T; Lartey, Margaret; Leufkens, Hubert G M; Dodoo, Alexander N O

Available evidence supports the efficacy of pre-exposure prophylaxis (PrEP) in decreasing the incidence of human immunodeficiency virus (HIV) infection among high-risk individuals, especially when used in combination with other behavioural preventive methods. Safety concerns about PrEP present

Introduction of the Amendment of IAEA Safety Requirements Reflected Lessons Learned from Fukushima Nuclear Accident

Energy Technology Data Exchange (ETDEWEB)

Ahn, Sang-Kyu; Ahn, Hyung-Joon; Kim, Sun-Hae; Cheong, Jae-Hak [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

The following five Safety Requirements publications were amended: Governmental, Legal and Regulatory Framework for Safety (GSR Part 1, 2010), Site Evaluation for Nuclear Installations (NS-R-3, 2003), Safety of Nuclear Power Plants: Design (SSR-2/1, 2012), Safety of Nuclear Power Plants: Commissioning and Operation (SSR-2/2, 2011), and Safety Assessment for Facilities and Activities (GSR Part 4, 2009). Figure 1 shows IAEA Safety Standards Categories Major amendments of five Safety Requirements publications were introduced and analyzed in this study. The five IAEA safety requirements publications which are GSR Part 1 and 4, NS-R-3 and SSR-2/1 and 2, were amended to reflect the lesson learned from the Fukushima accident and other operating experiences. Specially, 36 provisions were modified and the new 29 provision with 1 requirement (No. 67: Emergency response facilities on the site) of the SSR-2/1 were established. Since the Fukushima accident happened, a new word, design extension conditions (DECs) which cover substantially the beyond design basis accidents (BDBA), including severe accident conditions, was created and more elaborated by the world nuclear experts. Design extension conditions could include conditions in events without significant fuel degradation and conditions with core melting. Figure 2 shows the range of the DECs. The amendment of the five IAEA safety requirements publications are focused at the prevention of initiating events, which would lead to the DECs, and mitigation of the consequences of DECs by the enhanced defense in depth principle. The following examples of the IAEA requirements to prevent the initiating events are: margins for withstanding external events; margins for avoiding cliff edge effects; safety assessment for multiple facilities or activities at a single site; safety assessment in cases where resources at a facility are shared; consideration of the potential occurrence of events in combination; establishing levels of hazard

Validation of Safety-Critical Systems for Aircraft Loss-of-Control Prevention and Recovery

Science.gov (United States)

Belcastro, Christine M.

2012-01-01

Validation of technologies developed for loss of control (LOC) prevention and recovery poses significant challenges. Aircraft LOC can result from a wide spectrum of hazards, often occurring in combination, which cannot be fully replicated during evaluation. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of hazardous and uncertain conditions, and the validation framework must provide some measure of assurance that the new vehicle safety technologies do no harm (i.e., that they themselves do not introduce new safety risks). This paper summarizes a proposed validation framework for safety-critical systems, provides an overview of validation methods and tools developed by NASA to date within the Vehicle Systems Safety Project, and develops a preliminary set of test scenarios for the validation of technologies for LOC prevention and recovery

Improving transitional patient safety: research protocol of the Transitional Incident Prevention Programme

NARCIS (Netherlands)

M. van Melle (Marije); D.L.M. Zwart (Dorien); A.A. de Bont (Antoinette); I.W.M. Mol (Ineke); H.F. van Stel (Henk); N.J. de Wit (Niek)

2015-01-01

markdownabstract__Introduction:__ Patient transitions between primary and hospital care include referral, discharge, and simultaneous care by the outpatient clinic and the general practitioner (GP). Research on referrals and discharge shows that safety incidents in these transitions are common. We

Systems Thinking and Leadership: How Nephrologists Can Transform Dialysis Safety to Prevent Infections.

Science.gov (United States)

Wong, Leslie P

2018-04-06

Infections are the second leading cause of death for patients with ESKD. Despite multiple efforts, nephrologists have been unable to prevent infections in dialysis facilities. The American Society of Nephrology and the Centers for Disease Control and Prevention have partnered to create Nephrologists Transforming Dialysis Safety to promote nephrologist leadership and engagement in efforts to "Target Zero" preventable dialysis infections. Because traditional approaches to infection control and prevention in dialysis facilities have had limited success, Nephrologists Transforming Dialysis Safety is reconceptualizing the problem in the context of the complexity of health care systems and organizational behavior. By identifying different parts of a problem and attempting to understand how these parts interact and produce a result, systems thinking has effectively tackled difficult problems in dynamic settings. The dialysis facility is composed of different physical and human elements that are interconnected and affect not only behavior but also, the existence of a culture of safety that promotes infection prevention. Because dialysis infections result from a complex system of interactions between caregivers, patients, dialysis organizations, and the environment, attempts to address infections by focusing on one element in isolation often fail. Creating a sense of urgency and commitment to eradicating dialysis infections requires leadership and motivational skills. These skills are not taught in the standard nephrology or medical director curriculum. Effective leadership by medical directors and engagement in infection prevention by nephrologists are required to create a culture of safety. It is imperative that nephrologists commit to leadership training and embrace their potential as change agents to prevent infections in dialysis facilities. This paper explores the systemic factors contributing to the ongoing dialysis infection crisis in the United States and the role

Mitigating construction safety risks using prevention through design.

Science.gov (United States)

Gangolells, Marta; Casals, Miquel; Forcada, Núria; Roca, Xavier; Fuertes, Alba

2010-04-01

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD). This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs. Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction. The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance. Copyright 2010 Elsevier Ltd. All rights reserved.

Introduction of the system of hazard analysis critical control point to ensure the safety of irradiated food

International Nuclear Information System (INIS)

Sajet, A.S.

2014-01-01

Hazard Analysis Critical Control Point (HACCP) is a preventive system for food safety. It identifies safety risks faced by food. Identified points are controlled ensuring product safety. Because of presence of many of the pathogenic microorganisms and parasites in food which caused cases of food poisoning and many diseases transmitted through food, the current methods of food production could not prevent food contamination or prevent the growth of these pathogens completely because of being a part of the normal flora in the environment. Irradiation technology helped to control diseases transmitted through food, caused by pathological microorganisms and parasites present in food. The application of a system based on risk analysis as a means of risk management in food chain, demonstrated the importance of food irradiation. (author)

An introduction to covariant quantum gravity and asymptotic safety

CERN Document Server

Percacci, Roberto

2017-01-01

This book covers recent developments in the covariant formulation of quantum gravity. Developed in the 1960s by Feynman and DeWitt, by the 1980s this approach seemed to lead nowhere due to perturbative non-renormalizability. The possibility of non-perturbative renormalizability or "asymptotic safety," originally suggested by Weinberg but largely ignored for two decades, was revived towards the end of the century by technical progress in the field of the renormalization group. It is now a very active field of research, providing an alternative to other approaches to quantum gravity. Written by one of the early contributors to this subject, this book provides a gentle introduction to the relevant ideas and calculational techniques. Several explicit calculations gradually bring the reader close to the current frontier of research. The main difficulties and present lines of development are also outlined.

Health care-associated infection prevention in Japan: the role of safety culture.

Science.gov (United States)

Sakamoto, Fumie; Sakihama, Tomoko; Saint, Sanjay; Greene, M Todd; Ratz, David; Tokuda, Yasuharu

2014-08-01

Limited data exist on the use of infection prevention practices in Japan. We conducted a nationwide survey to examine the use of recommended infection prevention strategies and factors affecting their use in Japanese hospitals. Between April 1, 2012, and January 31, 2013, we surveyed 971 hospitals in Japan. The survey instrument assessed general hospital and infection prevention program characteristics and use of infection prevention practices, including practices specific to preventing catheter-associated urinary tract infection (CAUTI), central line-associated bloodstream infection (CLABSI), and ventilator-associated pneumonia (VAP). Logistic regression models were used to examine multivariable associations between hospital characteristics and the use of the various prevention practices. A total of 685 hospitals (71%) responded to the survey. Maintaining aseptic technique during catheter insertion and maintenance, avoiding routine central line changes, and using maximum sterile barrier precautions and semirecumbent positioning were the only practices regularly used by more than one-half of the hospitals to prevent CAUTI, CLABSI, and VAP, respectively. Higher safety-centeredness was associated with regular use of prevention practices across all infection types. Although certain practices were used commonly, the rate of regular use of many evidence-based prevention practices was low in Japanese hospitals. Our findings highlight the importance of fostering an organization-wide atmosphere that prioritizes patient safety. Such a commitment to patient safety should in turn promote the use of effective measures to reduce health care-associated infections in Japan. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

A study on Impact of Safety Culture on Safety Behavior: Moderating effect of Prevention Focus

Energy Technology Data Exchange (ETDEWEB)

Hwang, Sun Chul; Jung, Su Jin; Choi, Young Sung [KAERI, Daejeon (Korea, Republic of)

2016-05-15

In modern society, it has been acknowledged that disasters caused by civilization became inevitable. With growing attention to role of human as one component of the system to cope with accident to prevent disasters, various efforts have been deployed to keep safety. Most of the industries with high hazard have adopted the term as their banner in the efforts to promote safety in their installations and operations. Recently, the Fukushima nuclear power plants(NPPs) accident happened in Japan in 2011 resulted in great impact over the world and have highlighted the importance of safety culture again.

A study on Impact of Safety Culture on Safety Behavior: Moderating effect of Prevention Focus

International Nuclear Information System (INIS)

Hwang, Sun Chul; Jung, Su Jin; Choi, Young Sung

2016-01-01

In modern society, it has been acknowledged that disasters caused by civilization became inevitable. With growing attention to role of human as one component of the system to cope with accident to prevent disasters, various efforts have been deployed to keep safety. Most of the industries with high hazard have adopted the term as their banner in the efforts to promote safety in their installations and operations. Recently, the Fukushima nuclear power plants(NPPs) accident happened in Japan in 2011 resulted in great impact over the world and have highlighted the importance of safety culture again

Check for Safety: A Home Fall Prevention Checklist for Older Adults

Science.gov (United States)

... for Safety A Home Fall Prevention Checklist for Older Adults For more information, contact: Centers for Disease Control and Prevention 770-488-1506 www.cdc.gov/injury “Making changes in ... AT HOME Each year, thousands of older Americans fall at home. Many of them are ...

Microbicide clinical trial adherence: insights for introduction.

Science.gov (United States)

Woodsong, Cynthia; MacQueen, Kathleen; Amico, K Rivet; Friedland, Barbara; Gafos, Mitzy; Mansoor, Leila; Tolley, Elizabether; McCormack, Sheena

2013-04-08

After two decades of microbicide clinical trials it remains uncertain if vaginally- delivered products will be clearly shown to reduce the risk of HIV infection in women and girls. Furthermore, a microbicide product with demonstrated clinical efficacy must be used correctly and consistently if it is to prevent infection. Information on adherence that can be gleaned from microbicide trials is relevant for future microbicide safety and efficacy trials, pre-licensure implementation trials, Phase IV post-marketing research, and microbicide introduction and delivery. Drawing primarily from data and experience that has emerged from the large-scale microbicide efficacy trials completed to-date, the paper identifies six broad areas of adherence lessons learned: (1) Adherence measurement in clinical trials, (2) Comprehension of use instructions/Instructions for use, (3) Unknown efficacy and its effect on adherence/Messages regarding effectiveness, (4) Partner influence on use, (5) Retention and continuation and (6) Generalizability of trial participants' adherence behavior. Each is discussed, with examples provided from microbicide trials. For each of these adherence topics, recommendations are provided for using trial findings to prepare for future microbicide safety and efficacy trials, Phase IV post-marketing research, and microbicide introduction and delivery programs.

Safety barriers on oil and gas platforms. Means to prevent hydrocarbon releases

Energy Technology Data Exchange (ETDEWEB)

Sklet, Snorre

2005-12-15

The main objective of the PhD project has been to develop concepts and methods that can be used to define, illustrate, analyse, and improve safety barriers in the operational phase of offshore oil and gas production platforms. The main contributions of this thesis are; Clarification of the term safety barrier with respect to definitions, classification, and relevant attributes for analysis of barrier performance Development and discussion of a representative set of hydrocarbon release scenarios Development and testing of a new method, BORA-Release, for qualitative and quantitative risk analysis of hydrocarbon releases Safety barriers are defined as physical and/or non-physical means planned to prevent, control, or mitigate undesired events or accidents. The means may range from a single technical unit or human actions, to a complex socio-technical system. It is useful to distinguish between barrier functions and barrier systems. Barrier functions describe the purpose of safety barriers or what the safety barriers shall do in order to prevent, control, or mitigate undesired events or accidents. Barrier systems describe how a barrier function is realized or executed. If the barrier system is functioning, the barrier function is performed. If a barrier function is performed successfully, it should have a direct and significant effect on the occurrence and/or consequences of an undesired event or accident. It is recommended to address the following attributes to characterize the performance of safety barriers; a) functionality/effectiveness, b) reliability/ availability, c) response time, d) robustness, and e) triggering event or condition. For some types of barriers, not all the attributes are relevant or necessary in order to describe the barrier performance. The presented hydrocarbon release scenarios include initiating events, barrier functions introduced to prevent hydrocarbon releases, and barrier systems realizing the barrier functions. Both technical and human

Safety: Preventive Medicine.

Science.gov (United States)

Kotula, John R.; Digenakis, Anthony

1985-01-01

Underscores the need for community colleges to practice safety within the institutions and to instruct students in workplace safety procedures and requirements. Reviews Occupational Safety and Health Act (OSHA) regulations and their impact on industry and education. Looks at the legal responsibilities of colleges for safety. (DMM)

Proactive prevention in occupational safety and health: how to identify tomorrow's prevention priorities and preventive measures.

Science.gov (United States)

Hauke, Angelika; Flaspöler, Eva; Reinert, Dietmar

2018-04-17

Global trends such as digitalisation, globalisation and demographic change are changing workplaces, and accordingly occupational safety and health (OSH) needs. To better prepare for the future and to foster proactive prevention, the German Social Accident Insurance (DGUV) established an OSH risk observatory (RO OSH). The RO OSH relies on an online survey and calls upon the expertise of labour inspectors. 398 labour inspectors participated in the first RO OSH enquiry. They rated developments with regard to their sector-specific relevance for OSH in the near future. The RO OSH also provides ideas for preventive measures that can be implemented by the German Social Accident Insurance Institutions. Work intensity, demographic aspects, and digitalisation play a major role for most or all sectors. However, familiar OSH issues such as musculoskeletal strain and noise also continue to be of major importance and require further consideration and specific solutions in prevention. For the DGUV, training and consulting bear great potential for proactive prevention in the above priority areas, e.g. by fostering a prevention culture and supporting companies in (psychosocial) risk assessment (also for mobile work). For instance, concepts for increasing physical activity at sedentary workplaces, and data security require continued research.

Aviation Safety Program: Weather Accident Prevention (WxAP) Project Overview and Status

Science.gov (United States)

Nadell, Shari-Beth

2003-01-01

This paper presents a project overview and status for the Weather Accident Prevention (WxAP) aviation safety program. The topics include: 1) Weather Accident Prevention Project Background/History; 2) Project Modifications; 3) Project Accomplishments; and 4) Project's Next Steps.

Multipurpose prevention technologies for sexual and reproductive health: mapping global needs for introduction of new preventive products.

Science.gov (United States)

Schelar, Erin; Polis, Chelsea B; Essam, Timothy; Looker, Katharine J; Bruni, Laia; Chrisman, Cara J; Manning, Judy

2016-01-01

Worldwide, women face sexual and reproductive health (SRH) risks including unintended pregnancy and sexually transmitted infections (STIs) including HIV. Multipurpose prevention technologies (MPTs) combine protection against two or more SRH risks into one product. Male and female condoms are the only currently available MPT products, but several other forms of MPTs are in development. We examined the global distribution of selected SRH issues to determine where various risks have the greatest geographical overlap. We examined four indicators relevant to MPTs in development: HIV prevalence, herpes simplex virus type 2 prevalence (HSV-2), human papillomavirus prevalence (HPV) and the proportion of women with unmet need for modern contraception. Using ArcGIS Desktop, we mapped these indicators individually and in combination on choropleth and graduated symbol maps. We conducted a principal components analysis to reduce data and enable visual mapping of all four indicators on one graphic to identify overlap. Our findings document the greatest overlapping risks in Sub-Saharan Africa, and we specify countries in greatest need by specific MPT indication. These results can inform strategic planning for MPT introduction, market segmentation and demand generation; data limitations also highlight the need for improved (non-HIV) STI surveillance globally. MPTs are products in development with the potential to empower women to prevent two or more SRH risks. Geographic analysis of overlapping SRH risks demonstrates particularly high need in Sub-Saharan Africa. This study can help to inform strategic planning for MPT introduction, market segmentation and demand generation. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Radiological safety in petroleum industry. Towards prevention culture

International Nuclear Information System (INIS)

Truppa, Walter A.

2007-01-01

Within the frame of regulatory control of industrial applications the audit of sealed and open radioactive sources in oil uses is one of the most relevant. The handling of radioactive sources, the requirement of procedures and training are just a few examples among all those that make up the radiological safety culture. A number of requirements divided into three main groups: operational safety at the storage area of radioactive sources, during transportation and during the applications (Cementation, well logging and use of radiotracers) are highlighted. Due to the great number of aspects that have to be taken in account as well as the interrelation of all control processes it is highly recommended that aspects of safety culture and quality should be considered and improvements regarding prevention, should be introduced so as to correct deviations that could arise in order to avoid radiological risk situations, emphasizing risk perception situations, attitude training, implementation of audit and level of safety in the facilities and control of duties, involving radiological material handling, described in the present work. (author) [es

Safety and efficacy of AMG 334 for prevention of episodic migraine

DEFF Research Database (Denmark)

Sun, Hong Yan; Dodick, David W; Silberstein, Stephen D

2016-01-01

BACKGROUND: The calcitonin gene-related peptide (CGRP) pathway is a promising target for preventive therapies in patients with migraine. We assessed the safety and efficacy of AMG 334, a fully human monoclonal antibody against the CGRP receptor, for migraine prevention. METHODS: In this multicentre...... in monthly migraine days from baseline to the last 4 weeks of the 12-week double-blind treatment phase. The primary endpoint was calculated using the least squares mean at each timepoint from a generalised linear mixed-effect model for repeated measures. Safety endpoints were adverse events, clinical...... laboratory values, vital signs, and anti-AMG 334 antibodies. The study is registered with ClinicalTrials.gov, number NCT01952574. An open-label extension phase of up to 256 weeks is ongoing and will assess the long-term safety of AMG 334. FINDINGS: From Aug 6, 2013, to June 30, 2014, 483 patients were...

Creating a Culture of Prevention in Occupational Safety and Health Practice

OpenAIRE

Kim, Yangho; Park, Jungsun; Park, Mijin

2016-01-01

The incidence of occupational injuries and diseases associated with industrialization has declined markedly following developments in science and technology, such as engineering controls, protective equipment, safer machinery and processes, and greater adherence to regulations and labor inspections. Although the introduction of health and safety management systems has further decreased the incidence of occupational injuries and diseases, these systems are not effective unless accompanied by a...

9Th Injury Prevention and Safety Promotion Conference, Melbourne ...

African Journals Online (AJOL)

Test

The 9th Injury Prevention and Safety Promotion Conference was held in Melbourne,. Australia, from 24 to 26 July 2009. This conference formed part of a series of conferences initiated in 1993 by the Monash University's Accident Research Centre (MOARC) in partnership ... outputs in injury presentation work. The speaker ...

A change management approach to improving safety and preventing needle stick injuries.

Science.gov (United States)

Aziz, Ann-Marie

2017-09-01

Key drivers for preventing healthcare-associated infection (HCAI) include evidence-based practices and procedures that prevent infection. Among the current guidance for preventing HCAIs is evidence and mandatory requirements for reducing needle stick injuries (NSIs). This article highlights how John Kotter's model for change could help healthcare workers plan for successful and sustained deployment of needle safety devices (NSDs) and ultimately reduce the risk of a NSI.

Safety installation for preventing pollution by pipelines

Energy Technology Data Exchange (ETDEWEB)

Wittgenstein, G F

1972-10-25

A safety installation for preventing pollution by pipelines, particularly those used for transporting liquid hydrocarbons, is described. It is applicable to any pipeline, but particularly to underground or submarine pipelines, whether made of steel, plastics, or any other material. The 4 essential objects of the invention are to insure reliable prevention of pollution of the environment due to leakage of a hydrocarbon through cracks in the pipe; to evacuate the leakage flow without delay to a vessel; to signal almost instantaneously the existence of a leak; and to effect remote control of operations by which the dynamic pressure in the pipe is cancelled. Each equipped section consists of a fluid-type jacket of plastic material which surrounds the pipe, which at its ends is sealed off. It is these seals which delimit the sections. (7 claims)

Safety in Academic Chemistry Laboratories: Volume 2. Accident Prevention for Faculty and Administrators, 7th Edition.

Science.gov (United States)

American Chemical Society, Washington, DC.

This book contains volume 2 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Organizing for Accident Prevention"; (2) "Personal Protective Equipment"; (3) "Labeling"; (4) "Material Safety Data Sheets (MSDSs)"; (5) "Preparing for Medical…

Human Factors in Fire Safety Management and Prevention

Directory of Open Access Journals (Sweden)

M.A. Othuman Mydin

2014-07-01

Full Text Available Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behavior, compartmentalization, and investigation of fire and its related emergencies, as well as the research and development, production, testing and application of mitigating systems. Problems still occurred despite of the adequate fire safety systems installed. For most people in high-risk buildings, not all accidents were caused by them. They were more likely to be the victims of a fire that occurred. Besides damaging their properties and belongings, some people were burned to death for not knowing what to do if fire happens in their place. This paper will present the human factors in fire safety management and prevention system.

Safety design requirements for safety systems and components of JSFR

International Nuclear Information System (INIS)

Kubo, Shigenobu; Shimakawa, Yoshio; Yamano, Hidemasa; Kotake, Shoji

2011-01-01

Safety design requirements for JSFR were summarized taking the development targets of the FaCT project and design feature of JSFR into account. The related safety principle and requirements for Monju, CRBRP, PRISM, SPX, LWRs, IAEA standards, goals of GIF, basic principle of INPRO etc. were also taken into account so that the safety design requirements can be a next-generation global standard. The development targets for safety and reliability are set based on those of FaCT, namely, ensuring safety and reliability equal to future LWR and related fuel cycle facilities. In order to achieve these targets, the defence-in-depth concept is used as the basic safety design principle. General features of the safety design requirements are 1) Achievement of higher reliability, 2) Achievement of higher inspectability and maintainability, 3) Introduction of passive safety features, 4) Reduction of operator action needs, 5) Design consideration against Beyond Design Basis Events, 6) In-Vessel Retention of degraded core materials, 7) Prevention and mitigation against sodium chemical reactions, and 8) Design against external events. The current specific requirements for each system and component are summarized taking the basic design concept of JSFR into account, which is an advanced loop-type large-output power plant with a mixed-oxide-fuelled core. (author)

Nudging for Prevention in Occupational Health and Safety in South Africa Using Fiscal Policies.

Science.gov (United States)

de Jager, Pieter; Rees, David; Kisting, Sophia; Kgalamono, Spo; Ndaba, Mpume; Stacey, Nicolas; Tugendhaft, Aviva; Hofman, Karen

2017-08-01

Currently, in some countries occupational health and safety policy and practice have a bias toward secondary prevention and workers' compensation rather than primary prevention. Particularly, in emerging economies, research has not adequately contributed to effective interventions and improvements in workers' health. This article, using South Africa as a case study, describes a methodology for identifying candidate fiscal policy interventions and describes the policy interventions selected for occupational health and safety. It is argued that fiscal policies are well placed to deal with complex intersectoral health problems and to focus efforts on primary prevention. A major challenge is the lack of empirical evidence to support the effectiveness of fiscal policies in improving workers' health. A second challenge is the underprioritization of occupational health and safety partly due to the relatively small burden of disease attributed to occupational exposures. Both challenges can and should be overcome by (i) conducting policy-relevant research to fill the empirical gaps and (ii) reconceptualizing, both for policy and research purposes, the role of work as a determinant of population health. Fiscal policies to prevent exposure to hazards at work have face validity and are thus appealing, not as a replacement for other efforts to improve health, but as part of a comprehensive effort toward prevention.

Introduction to risk assessment

International Nuclear Information System (INIS)

Raina, V.M.

2002-01-01

This paper gives an introduction to risk assessment. It discusses the basic concepts of risk assessment, nuclear risk assessment process and products, the role of risk assessment products in nuclear safety assurance, the relationship between risk assessment and other safety analysis and risk assessment and safe operating envelope

Introduction into the nuclear safety technologies

International Nuclear Information System (INIS)

Nosovskij, A.V.; Vasil'chenko, V.M.; Pavlenko, A.A.; Pis'mennyj, E.N.; Shirokov, S.V.

2006-01-01

The theoretical and practical issues of the power and research nuclear reactor safety existing on the territory of Ukraine, the radwaste and nuclear material management objects, as well as the 'Shelter' object, the aspects of the nuclear and radiation safety regulation are considered

Preventing Medication Error Based on Knowledge Management Against Adverse Event

OpenAIRE

Hastuti, Apriyani Puji; Nursalam, Nursalam; Triharini, Mira

2017-01-01

Introductions: Medication error is one of many types of errors that could decrease the quality and safety of healthcare. Increasing number of adverse events (AE) reflects the number of medication errors. This study aimed to develop a model of medication error prevention based on knowledge management. This model is expected to improve knowledge and skill of nurses to prevent medication error which is characterized by the decrease of adverse events (AE). Methods: This study consisted of two sta...

Safety of the pressure vessels of water reactors. Prevention of sudden failure

International Nuclear Information System (INIS)

Petrequin, P.; Barrachin, B.

1975-01-01

From the safety view point the primary circuit is considered as the essential barrier against the diffusion of radioactive products in the event of fuel element failure. The safety of the vessel itself, the failure of which is not accounted for in accident analyses, is based chiefly on a series of preventive measures such as the suitable choice of materials and manufacturing process, compliances with detailed specifications concerning tests and defect tolerances, supervision in service. All these points are examined in detail when the safety analysis is performed. In this context the Service de Recherches Metallurgiques Appliquees assists the Department de Surete Nucleaire in the study of special problems such as the prevention of sudden failure and the characterisation of steels as a function of working conditions, particularly neutron irradiation. The report is thus devoted mainly to the presentation of methods to prevent sudden failure, with special emphasis on the limits of application. Some results obtained at the Service de Recherches Metallurgiques Appliquees on steels typical of those used for water reactor vessels (A533 and A508Cl.3) are given by way of example. Part two concentrates on the role of various factors influencing embrittlement by irradiation [fr

Economic evaluation of occupational safety preventive measures in a hospital.

Science.gov (United States)

Ramos, Delfina G; Arezes, Pedro M; Afonso, Paulo

2015-01-01

When an organization performs an integrated analysis of risks through its Occupational Health and Safety Management System, several steps are suggested to address the implications of the identified risks. Namely, the organization should make a detailed analysis of the monetary impact for the organization of each of the preventive measures considered. However, it is also important to perform an analysis of the impact of each measure on society (externalities). The aim of this paper is to present a case study related to the application of the proposed economic evaluation methodology. An analysis of the work accidents in a hospital has been made. Three of the major types of accidents have been selected: needle stings, falls and excessive strain. Following the risk assessment, some preventive measures have been designed. Subsequently, the Benefit/Cost ratio (B/C) of these measures has been calculated, both in financial terms (from the organization's perspective) and in economic terms (including the benefits for the worker and for the Society). While the financial ratio is only advantageous in some cases, when the externalities are taken into account, the B/C ratio increases significantly. It is important to consider external benefits to make decisions concerning the implementation of preventive measures in Occupational Health and Safety projects.

Playground Safety

Science.gov (United States)

... Prevention Fall Prevention Playground Safety Poisoning Prevention Road Traffic Safety Sports Safety Get Email Updates To receive ... at the Consumer Product Safety Commission’s Playground Safety website . References U.S. Consumer Product Safety Commission. Injuries and ...

Introduction to the reliability and safety of mechanical supports. Einfuehrung in die Sicherheit und Zuverlaessigkeit von Tragwerken

Energy Technology Data Exchange (ETDEWEB)

Schueller, G I

1981-01-01

The book is divided into an introduction and three sections. The first section deals with the elements of statistics and the theory of probability. This section, providing also simple examples of application, is intended for such readers which up to now are not or only little familiar with the probabilistic philosophy and its application to problems of civil engineering. This section also is suited as an accompanying or supplementary text for an introductory lecture in this field and, as a matter of fact, is used as such by the author at Munich Technical University. The second section especially deals with the application of these methods to supporting structures, i.e. with the introduction to safety theory and reliability assessment of buildings. This section also treats the essential concepts and with the knowledge in probability theory and statistics already at hand or gained by studying the first section is easily understandable. Here also references are given concerning the elements of establishing standards and codes on the bases of probability theory. The last section deals with practical applications of safety reliability theory prepared in the preceeding section. This is done using engineering structures loaded by wind, seismic and wave forces.

Safety in Academic Chemistry Laboratories: Volume 1. Accident Prevention for College and University Students, 7th Edition.

Science.gov (United States)

American Chemical Society, Washington, DC.

This book contains volume 1 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Your Responsibility for Accident Prevention"; (2) "Guide to Chemical Hazards"; (3) "Recommended Laboratory Techniques"; and (4) "Safety Equipment and Emergency…

Preventive measures for safety and helth at work with the amphibious transporter PTS-M

Directory of Open Access Journals (Sweden)

Nenad V. Kovačević

2014-04-01

Full Text Available Nowadays, the knowledge of using the amphibious transporter STM-M ( STM-M is very limited. A small number of professional soldiers in the Serbian Armed Forces know how to use thisvery useful and high-quality military vehicle in a regular way. From the day onethis vehicle has remained in its basic shape without any modifications since it was made in the former Soviet Union. Today, the Serbian Armed Forces have only 12 of these vehicles in the operational use. The Serbian Armed Forces have two amphibious platoons in two pontoon batalions in the River Flotilla. As the author of this article was an officer in charge of maintaining this complex and “unusual” vehicle, the article deals with the provisions from the Regulations on preventive measures for safety and health while using work equipment (Ministry of Labour, 2012, applied to work with STM-Ms, The article makes a parallel between the provisions of the Regulations and the actual situation and specific conditions of using and maintaining STM-Ms . Introduction Some basic information about the STM-M is given here, twith Figure 1 of this vehicle and its tactical and technicalspecifications.The dangerous places onthe vehicle are presented as well. Mesuares and rules for safe work This part ofthe article presents all speciall tools on the STM-M that are used for safe work. Each piece of tool is described in detail -itslocationon the STM-M, its physical characteristics,  and most common mistakes during its use. Some measures for better maintenance and improved safety at work are also proposed. Conclusion The conclusion deals with the misuse and wrong maintenance of STM-Ms and gives some proposals for their better use. A critical commentary about the conditions of safety engineering in the Serbian Armed Forces can be found here as well.  

Criticality safety issues associated with the introduction of low void reactivity fuel in the Bruce reactors - a management and technical overview

International Nuclear Information System (INIS)

Thompson, J.W.; Austman, G.; Iglesias, F.; Schmeing, H.; Elliott, C.; Archinoff, G.

2004-01-01

The concept of criticality for operating reactor staff, particularly in a natural uranium-fuelled reactor, is relatively benign - the reactor is controlled at the critical condition by the regulating system. That is, issues related to criticality exist only within the reactor, in a set of carefully managed circumstances. With the introduction of enriched Low Void Reactivity Fuel (LVRF) into this operating environment comes a new 'concept of criticality', one which, although physically the same, cannot be treated in the same fashion. It may be the case that criticality can be achieved outside the reactor, albeit with a set of very pessimistic assumptions. Such 'inadvertent criticality' outside the reactor, should it occur, cannot be controlled. The consequences of such an inadvertent criticality could have far-reaching effects, not only in terms of severe health effects to those nearby, but also in terms of the negative impact on Bruce Power, and the Canadian nuclear industry in general. Thus the introduction of LVRF in the Bruce B reactors, and therefore the introduction of this new hazard, inadvertent criticality, warrants the development of a governance structure for its management. Such a program will consist of various elements, including the establishment of a framework to administer the criticality safety program, analytical assessment to support the process design, the development of operational procedures, the development of enhanced emergency procedures if necessary, and the implementation of a criticality safety training program. The entire package must be sufficient to demonstrate to station management, and the regulator, that the criticality safety risks associated with the implementation of enriched fuel have been properly evaluated, and that all necessary steps have been taken to effectively manage these risks. A well-founded Criticality Safety Program will offer such assurance. In this paper, we describe the establishment of a Criticality Safety

Overcoming the organization-practice barrier in sports injury prevention: A nonhierarchical organizational model.

Science.gov (United States)

Dahlström, Ö; Jacobsson, J; Timpka, T

2015-08-01

The organization of sports at the national level has seldom been included in scientific discussions of sports injury prevention. The aim of this study was to develop a model for organization of sports that supports prevention of overuse injuries. The quality function deployment technique was applied in seminars over a two-season period to develop a national organizational structure for athletics in Sweden that facilitates prevention of overuse injuries. Three central features of the resulting model for organization of sports at the national level are (a) diminishment of the organizational hierarchy: participatory safety policy design is introduced through annual meetings where actors from different sectors of the sporting community discuss training, injury prevention, and sports safety policy; (b) introduction of a safety surveillance system: a ubiquitous system for routine collection of injury and illness data; and (c) an open forum for discussion of safety issues: maintenance of a safety forum for participants from different sectors of the sport. A nonhierarchical model for organization of sports at the national level - facilitated by modern information technology - adapted for the prevention of overuse injuries has been developed. Further research is warranted to evaluate the new organizational model in prospective effectiveness studies. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Definition and Means of Maintaining the Criticality Prevention Design Features Portion of the PFP Safety Envelope

International Nuclear Information System (INIS)

RAMBLE, A.L.

2000-01-01

The purpose of this document is to record the technical evaluation of the Operational Safety Requirements described in the Plutonium Finishing Plant Final (PFP) Operational Safety Requirements, WHC-SD-CP-OSR-010. Rev. 0-N , Section 3.1.1, ''Criticality Prevention System.'' This document, with its appendices, provides the following: (1) The results of a review of Criticality Safety Analysis Reports (CSAR), later called Criticality Safety Evaluation Reports (CSER), and Criticality Prevention Specifications (CPS) to determine which equipment or components analyzed in the CSER or CPS are considered as one of the two unlikely, independent, and concurrent changes before a criticality accident is possible. (2) Evaluations of equipment or components to determine the safety boundary for the system (Section 4). (3) A list of essential drawings that show the safety system or component (Appendix A). (4) A list of the safety envelope (SE) equipment (Appendix B). (5) Functional requirements for the individual safety envelope equipment (Sections 3 and 4). (6) A list of the operational and surveillance procedures necessary to maintain the system equipment within the safety envelope (Section 5)

MODERN THREATS OF SOCIAL SAFETY OF THE EDUCATION ENVIRONMENT AND THEIR PREVENTION

Directory of Open Access Journals (Sweden)

Павел Александрович Кисляков

2013-04-01

Full Text Available Purpose: identify modern threats of safety of the school and substantiate the direction of their prevention.Methodology: a theoretical analysis of psychological and pedagogical literature on the issues of safety of students.Results: on the basis of theoretical and empirical analysis identified the following threats of social safety of the education environment: criminal threats, threats of extremism and terrorism, physical and mental abuse, interpersonal conflicts, addictive behavior of students. Substantiates the necessity the design of social safety protection, including space of health, space of tolerance, psychologically comfortable space without violence also providing appropriate training of educators.Practical implications: the system of education.DOI: http://dx.doi.org/10.12731/2218-7405-2013-2-2

Evaluation of implementation an Integrated Safety and Preventive Maintenance System for Improving of Safety Indexes

Directory of Open Access Journals (Sweden)

I mohammadfam

2014-03-01

Full Text Available Accident analysis shows that one of the main reasons for accidents is non-integration of maintenance units with safety. Merging these two processes through an integrated system can reduce and or eliminate accidents, diseases, and environmental pollution. These issues lead to improvement in organizational performance, as well. The aim of this study is to design and establish an integrated system for obtaining the aforementioned goal. Integration was carried out at Nirou Moharreke Machine Tools Company via Structured System Analysis & Design Method (SSADM. In order to measure the effectiveness of the system, selected indexes were compared using statistical methods prior and after system establishment. Results show that the accident severity index reduced from 135.46 in 2010, to 43.85 in 2012. Moreover, system effectiveness improved equipment reliability and availability (e.g. reliability of the Pfeiffer Milling machine (P (t>50 increased from 0.89 in 2010, to 0.9 in 2012. This system by forecasting various failures, and planning and designing the required operations for preventing occurrence of these failures, plays an important role in improving safety conditions of equipment, and increasing organizational performance, and is capable of presenting an excellent accident prevention program.

A comparative analysis of occupational health and safety risk prevention practices in Sweden and Spain.

Science.gov (United States)

Morillas, Rosa María; Rubio-Romero, Juan Carlos; Fuertes, Alba

2013-12-01

Scandinavian countries such as Sweden implemented the occupational health and safety (OHS) measures in the European Directive 89/391/EEC earlier than other European counties, including Spain. In fact, statistics on workplace accident rates reveal that between 2004 and 2009, there were considerably fewer accidents in Sweden than in Spain. The objective of the research described in this paper was to reduce workplace accidents and to improve OHS management in Spain by exploring the OHS practices in Sweden. For this purpose, an exploratory comparative study was conducted, which focused on the effectiveness of the EU directive in both countries. The study included a cross-sectional analysis of workplace accident rates and other contextual indicators in both national contexts. A case study of 14 Swedish and Spanish companies identified 14 differences in the preventive practices implemented. These differences were then assessed with a Delphi study to evaluate their contribution to the reduction of workplace accidents and their potential for improving health and safety management in Spain. The results showed that there was agreement concerning 12 of the 14 practices. Finally, we discuss opportunities of improvement in Spanish companies so that they can make their risk management practices more effective. The findings of this comparative study on the implementation of the European Directive 89/391/EEC in both Sweden and Spain have revealed health and safety managerial practices which, if properly implemented, could contribute to improved work conditions and accident statistics of Spanish companies. In particular, the results suggest that Spanish employers, safety managers, external prevention services, safety deputies and Labour Inspectorates should consider implementing streamlined internal preventive management, promoting the integration of prevention responsibilities to the chain of command, and preventing health and safety management from becoming a mere exchange of

Introduction

International Nuclear Information System (INIS)

Van Walle, E.

2007-01-01

The introduction to the annual report 2006 of the Belgian Nuclear Research Centre SCK-CEN highlights the reorganisation of SCK-CEN that became effective in 2006. An overview is given of the principal activities of Institute for Nuclear Materials Science, the Institute for Advanced Nuclear Systems, the Institute for Environment, Health and Safety and the Institute for Communication, Services and Administration

Safety climate and workplace violence prevention in state-run residential addiction treatment centers.

Science.gov (United States)

Lipscomb, Jane A; London, M; Chen, Y M; Flannery, K; Watt, M; Geiger-Brown, J; Johnson, J V; McPhaul, K

2012-01-01

To examine the association between violence prevention safety climate measures and self reported violence toward staff in state-run residential addiction treatment centers. In mid-2006, 409 staff from an Eastern United States state agency that oversees a system of thirteen residential addiction treatment centers (ATCs) completed a self-administered survey as part of a comprehensive risk assessment. The survey was undertaken to identify and measure facility-level risk factors for violence, including staff perceptions of the quality of existing US Occupational Safety and Health Administration (OSHA) program elements, and ultimately to guide violence prevention programming. Key informant interviews and staff focus groups provided researchers with qualitative data with which to understand safety climate and violence prevention efforts within these work settings. The frequency with which staff reported experiencing violent behavior ranged from 37% for "clients raised their voices in a threatening way to you" to 1% for "clients pushed, hit, kicked, or struck you". Findings from the staff survey included the following significant predictors of violence: "client actively resisting program" (OR=2.34, 95% CI=1.35, 4.05), "working with clients for whom the history of violence is unknown" (OR=1.91, 95% CI=1.18, 3.09) and "management commitment to violence prevention" reported as "never/hardly ever" and "seldom or sometimes" (OR=4.30 and OR=2.31 respectively), while controlling for other covariates. We utilized a combination of qualitative and quantitative research methods to begin to describe the risk and potential for violence prevention in this setting. The prevalence of staff physical violence within the agency's treatment facilities was lower than would be predicted. Possible explanations include the voluntary nature of treatment programs; strong policies and consequences for resident behavior and ongoing quality improvement efforts. Quantitative data identified low

The Safety Prevention in the Theater Management and Operation

Institute of Scientific and Technical Information of China (English)

WU Sheng

2015-01-01

Take the operation and management experience as examples, the author discussed how to formulate a set of complete and effective equipment management system, operating rules, procedures and standards, as well as the safety prevention and control measures, according to the national or trade related laws and regulations and combining the operation and performance characteristics of theatre management, in order to ensure the safe operation of theatre and stage equipment.

Estimating the Size and Cost of the STD Prevention Services Safety Net.

Science.gov (United States)

Gift, Thomas L; Haderxhanaj, Laura T; Torrone, Elizabeth A; Behl, Ajay S; Romaguera, Raul A; Leichliter, Jami S

2015-01-01

The Patient Protection and Affordable Care Act is expected to reduce the number of uninsured people in the United States during the next eight years, but more than 10% are expected to remain uninsured. Uninsured people are one of the main populations using publicly funded safety net sexually transmitted disease (STD) prevention services. Estimating the proportion of the uninsured population expected to need STD services could help identify the potential demand for safety net STD services and improve program planning. In 2013, an estimated 8.27 million people met the criteria for being in need of STD services. In 2023, 4.70 million uninsured people are expected to meet the criteria for being in need of STD services. As an example, the cost in 2014 U.S. dollars of providing chlamydia screening to these people was an estimated $271.1 million in 2013 and is estimated to be $153.8 million in 2023. A substantial need will continue to exist for safety net STD prevention services in coming years.

The promotion of work safety. A continuous task for the Swiss gas industry

International Nuclear Information System (INIS)

Luescher, H.J.

1993-01-01

The modern Western European population values the work safety very highly because of ethical and economical reasons. In Switzerland too, safety at work is actively promoted. Based on national legislation and on the SGWA-Association Statutes, the Swiss Gas Industry, with great engagement, promotes the measures for accident prevention. Following a general introduction into the legislative basis, possible ways and means for the promotion of safety at work are described. Subsequently, the concrete activities of the Gas Supply Authorities and the SGWA are pointed out, followed by a description of the future work-safety programmes of the Swiss Gas Industry. (orig.) [de

Safety barriers to prevent release of hydrocarbons during production of oil and gas

OpenAIRE

Sklet, Snorre; Hauge, Stein

2004-01-01

This report documents a set of scenarios related to release of hydrocarbons during production on oil and gas platforms. For each release scenario, initiating events, barrier functions aimed to prevent loss of containment, and barrier systems that realize these barrier functions are identified and described. Safety barriers to prevent release of hydrocarbons during production of oil and gas

Modeling of preventive maintenance changes influence upon flight safety indexes

Directory of Open Access Journals (Sweden)

А.В. Гончаренко

2004-03-01

Full Text Available  It is considered a simplified model of connection between the catastrophic events flow frequency and both preventive maintenance changes periodicity and diagnosis depth of aviation equipment. It is deduced specific formulas for computing the changes and diagnostics parameters influence upon the values of both the catastrophic events flow frequency and technical-economical control factor criterion of flight safety levels.

Radiation Safety and Culture of Prevention in the Use of Radioactive Materials in Industry. Criteria and Trends

International Nuclear Information System (INIS)

Truppa, W.A.

2011-01-01

As time goes by and experience is gained, modernization and technological development show the need to implement more complex programs and procedures to ensure a high level of compliance with radiation safety, particularly in those activities in which radioactive material is used in industry. A relevant aspect of present technology is the concern to introduce mechanisms to prevent radiological accidents or incidents, to ensure early detection of failures. This includes systems that either individually or as a whole, increase the level of responsibility of the different disciplines involved, so as to avoid a situation that could lead to loss of control of the facility or part of it. The prevention of an abnormal situation, overexposure of workers or unwanted risks, should be considered in the level of vulnerability of the facility, a concept drawn from international protection systems and which is applied directly in radiation safety. Preventive management, risk communication and proposals for change or improvement along with the detection of risks and training, constitute all the factors contained within prevention policies. Dose limitation, optimization and justification, old tools used for decades, could not be replaced by other modern concepts and criteria. ALARA culture (including performance indicators) should be considered. The atmosphere at work, working under pressure as well as other factors such as quality issues, ethics of prevention, etc. align with this idea of prevention and safety, besides changes in attitude, towards risk prevention (methods, reports, intervention guides, working instructions, and any other helpful tool), are followed by preventive, as well as predictive and corrective maintenance, applied to minimize the dose absorbed by workers. A clear policy of prevention is needed as well as an appropriate level of radiation safety which should be taken into account since the very beginning of the development of a given practice. All these

Radiation safety and culture of prevention in the use of radioactive materials in industry : criteria and trends

International Nuclear Information System (INIS)

Truppa, Walter Adrian

2008-01-01

As time goes by and experience is gained, modernization and technological development show the need to implement more complex programs and procedures to ensure a high level of compliance with radiation safety, particularly in those activities in which radioactive material is used in industry. A relevant aspect of present technology is the concern to introduce mechanisms to prevent radiological accidents or incidents, to ensure early detection of failures. This includes systems that either individually or as a whole, increase the level of responsibility of the different disciplines involved, so as to avoid a situation that could lead to loss of control of the facility or part of it. The prevention of an abnormal situation, overexposure of workers or unwanted risks, should be considered in the level of vulnerability of the facility, a concept drawn from international protection systems and which is applied directly in radiation safety. Preventive management, risk communication and proposals for change or improvement along with the detection of risks and training, constitute all the factors contained within prevention policies. Dose limitation, optimization and justification, old tools used for decades, could not be replaced by other modern concepts and criteria. ALARA culture (including performance indicators) should be considered. The atmosphere at work, working under pressure as well as other factors such as quality issues, ethics of prevention, etc. align with this idea of prevention and safety, besides changes in attitude, towards risk prevention (methods, reports, intervention guides, working instructions, and any other helpful tool), are followed by preventive, as well as predictive and corrective maintenance, applied to minimize the dose absorbed by workers. A clear policy of prevention is needed as well as an appropriate level of radiation safety which should be taken into account since the very beginning of the development of a given practice. All these

A review of the literature on preventive occupational health and safety activities in small enterprises

DEFF Research Database (Denmark)

Hasle, Peter; Limborg, Hans Jørgen

2006-01-01

The scientific literature regarding preventive occupational health and safety activities in small enterprises has been reviewed in order to identify effective preventive approaches and to develop a future research strategy. During the last couple of years, there has been a significant increase...

Safety measures to prevent workplace violence in emergency primary care centres--a cross-sectional study.

Science.gov (United States)

Morken, Tone; Johansen, Ingrid H

2013-10-03

Employees in emergency primary care centres (EPCC) have raised personal safety as an issue. Despite a high risk of experiencing workplace violence at EPCCs in Norway, knowledge regarding applied preventive measures is limited. The description of existing safety measures is an important prerequisite to evaluate and make guidelines for the improvement of preventive practices on a national level. The objective of this study was to investigate to which extent general practitioners work alone in EPCCs in Norway, and to estimate the prevalence of other preventive measures against workplace violence. A survey was sent to the managers of all 210 registered EPCCs in Norway. The questionnaire included 22 items on safety measures, including available staff, architecture and outfitting of the reception and consulting rooms, and the availability of electronic safety systems and training or monitoring systems. The data were analysed using descriptive statistics. Differences between EPCCs staffed by one general practitioner alone and EPCCs with more health personnel on duty were explored. Sixty-one (30%) of the 203 participating EPCCs had more than one person on duty round-the-clock. These EPCCs reported the application of a significantly higher number of safety measures compared to the EPCCs with only one general practitioner on duty during some or part of the 24 hours. Examples of safety measures being more common in highly staffed EPCCs were automatic door locks (p < 0.001), arrangement of furniture in the consulting room ensuring that the patient is not seated between the clinician and the exit (p = 0.014), the possibility of bringing an extra person on emergency call-outs or home visits when needed for security reasons (p = 0.014), and having organised training regarding violence (p < 0.001). This study shows considerable differences between Norwegian EPCCs regarding applied preventive measures, and a higher prevalence of such measures in EPCCs staffed with

A system of safety management practices and worker engagement for reducing and preventing accidents: an empirical and theoretical investigation.

Science.gov (United States)

Wachter, Jan K; Yorio, Patrick L

2014-07-01

The overall research objective was to theoretically and empirically develop the ideas around a system of safety management practices (ten practices were elaborated), to test their relationship with objective safety statistics (such as accident rates), and to explore how these practices work to achieve positive safety results (accident prevention) through worker engagement. Data were collected using safety manager, supervisor and employee surveys designed to assess and link safety management system practices, employee perceptions resulting from existing practices, and safety performance outcomes. Results indicate the following: there is a significant negative relationship between the presence of ten individual safety management practices, as well as the composite of these practices, with accident rates; there is a significant negative relationship between the level of safety-focused worker emotional and cognitive engagement with accident rates; safety management systems and worker engagement levels can be used individually to predict accident rates; safety management systems can be used to predict worker engagement levels; and worker engagement levels act as mediators between the safety management system and safety performance outcomes (such as accident rates). Even though the presence of safety management system practices is linked with incident reduction and may represent a necessary first-step in accident prevention, safety performance may also depend on mediation by safety-focused cognitive and emotional engagement by workers. Thus, when organizations invest in a safety management system approach to reducing/preventing accidents and improving safety performance, they should also be concerned about winning over the minds and hearts of their workers through human performance-based safety management systems designed to promote and enhance worker engagement. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Introduction of male circumcision for HIV prevention in Uganda: analysis of the policy process.

Science.gov (United States)

Odoch, Walter Denis; Kabali, Kenneth; Ankunda, Racheal; Zulu, Joseph Mumba; Tetui, Moses

2015-06-20

Health policy analysis is important for all health policies especially in fields with ever changing evidence-based interventions such as HIV prevention. However, there are few published reports of health policy analysis in sub-Saharan Africa in this field. This study explored the policy process of the introduction of male circumcision (MC) for HIV prevention in Uganda in order to inform the development processes of similar health policies. Desk review of relevant documents was conducted between March and May 2012. Thematic analysis was used to analyse the data. Conceptual frameworks that demonstrate the interrelationship within the policy development processes and influence of actors in the policy development processes guided the analysis. Following the introduction of MC on the national policy agenda in 2007, negotiation and policy formulation preceded its communication and implementation. Policy proponents included academic researchers in the early 2000s and development partners around 2007. Favourable contextual factors that supported the development of the policy included the rising HIV prevalence, adoption of MC for HIV prevention in other sub-Saharan African countries, and expertise on MC. Additionally, the networking capability of proponents facilitated the change in position of non-supportive or neutral actors. Non-supportive and neutral actors in the initial stages of the policy development process included the Ministry of Health, traditional and Muslim leaders, and the Republican President. Using political authority, legitimacy, and charisma, actors who opposed the policy tried to block the policy development process. Researchers' initial disregard of the Ministry of Health in the research process of MC and the missing civil society advocacy arm contributed to delays in the policy development process. This study underscores the importance of securing top political leadership as well as key implementing partners' support in policy development processes

Managing preventive occupational health and safety activities in Danish enterprises during a period of financial crisis

DEFF Research Database (Denmark)

Andersen, Hans H. K.; Bach, Elsa

2017-01-01

The onset of the financial crisis in 2008 has put pressure on enterprises that in turn have downsized and reorganized. Research has shown that economic recession has an effect on psychological and behavioral health that is attributed to working environment problems. The objective of this study is...... focus on the management of preventive workplace health and safety activities in enterprises during a period of economic recession....... is to unravel whether the onset of a general economic recession has had an impact on companies’ and public institutions’ preventive occupational health and safety activities. Hypotheses of the role of pro-cyclical and countercyclical effects are presented. This study is based on a survey of enterprise...... preventive occupational health safety activities. The baseline for the survey was established, in 2006 before the onset of the recession, with a follow up in 2011. Findings are discussed that support both the pro-cyclical and the countercyclical hypotheses. It is concluded that there is a need for a special...

The Future of Research on Evidence-based Developmental Violence Prevention in Europe – Introduction to the Focus Section

Directory of Open Access Journals (Sweden)

Manuel Eisner

2012-12-01

Full Text Available Across Europe, there is an increasing demand for good evidence that can inform policies aimed at reducing violence against and among children and adolescents. However, there is still a paucity of high-quality research on effective prevention of bullying and violence, and researchers from different parts of Europe rarely discuss their findings. The focus section of this issue of the International Journal of Conflict and Violence brings together work by prominent preventionscholars from across Europe, who show that significant progress is being made. The introduction presents nine recommendations about how prevention research could be further strengthened in Europe.

A prospective, randomized, multicenter, controlled study of the safety of Seprafilm adhesion barrier in abdominopelvic surgery of the intestine.

NARCIS (Netherlands)

Beck, D.E.; Cohen, Z.; Fleshman, J.W.; Kaufman, H.S.; Goor, H. van; Wolff, B.G.

2003-01-01

INTRODUCTION: Seprafilm adhesion barrier (Seprafilm) has been proven to prevent adhesion formation after abdominal and pelvic surgery. This article reports safety results, including the postoperative incidence of abdominal and pelvic abscess and pulmonary embolism, from a large, multicenter trial

Issues and future directions of 'introduction of Risk Informed Regulation'

International Nuclear Information System (INIS)

2008-01-01

In 2004, Nuclear Safety Commission of Japan (NSC) set up a taskforce for developing a scheme of Risk Informed Regulation (RIR) introduction, which had discussed various aspects of utilization of risk information in nuclear regulations. In the final report compiled in 2007, the taskforce identified the significance of RIR introduction from viewpoint of enhancement of rationality, consistency and transparency as well as appropriate allocation of regulatory resources in the nuclear safety regulation and major issues for the further promotion were as follows: NSC is to maintain the comprehensively promoting function of the RIR introduction with reviewing global trends and latest technological knowledge, regulatory bodies are to further enhance the RIR in inspection and operational area, utilities and industries are to utilize further risk information in their self-maintenance activities and to gather trouble information data, academic societies are to establish the standards for risk evaluation technology and RIR, and research institutes are to carry out safety research and risk training for risk-communicators. This article presented summary of the final report aiming at upgrading safety regulation with enhancement of RIR introduction. (T. Tanaka)

Reactor safety

International Nuclear Information System (INIS)

Butz, H.P.; Heuser, F.W.; May, H.

1985-01-01

The paper comprises an introduction into nuclear physics bases, the safety concept generally speaking, safety devices of pwr type reactors, accident analysis, external influences, probabilistic safety assessment and risk studies. It further describes operational experience, licensing procedures under the Atomic Energy Law, research in reactor safety and the nuclear fuel cycle. (DG) [de

Introduction to HACCP.

Science.gov (United States)

Introduction to HACCP Deana R. Jones, Ph.D. Egg Safety and Quality Research Unit USDA-Agricultural Research Service Russell Research Center Athens, GA Deana.Jones@ars.usda.gov HACCP is an acronym for Hazard Analysis and Critical Control Point and was initially developed by the Pillsbury Company a...

Introduction to clinical nutrition

National Research Council Canada - National Science Library

Sardesai, Vishwanath M

2012-01-01

.... Introduction to Clinical Nutrition, Third edition discusses the physiologic and metabolic interrelationships of all nutrients and their roles in health maintenance and the prevention of various...

The national response for preventing healthcare-associated infections: research and adoption of prevention practices.

Science.gov (United States)

Kahn, Katherine L; Mendel, Peter; Leuschner, Kristin J; Hiatt, Liisa; Gall, Elizabeth M; Siegel, Sari; Weinberg, Daniel A

2014-02-01

Healthcare-associated infections (HAIs) have long been the subject of research and prevention practice. When findings show potential to significantly impact outcomes, clinicians, policymakers, safety experts, and stakeholders seek to bridge the gap between research and practice by identifying mechanisms and assigning responsibility for translating research to practice. This paper describes progress and challenges in HAI research and prevention practices, as explained through an examination of Health and Human Services (HHS) Action Plan's goals, inputs, and implementation in each area. We used the Context-Input-Process-Product evaluation model, together with an HAI prevention system framework, to assess the transformative processes associated with HAI research and adoption of prevention practices. Since the introduction of the Action Plan, HHS has made substantial progress in prioritizing research projects, translating findings from those projects into practice, and designing and implementing research projects in multisite practice settings. Research has emphasized the basic science and epidemiology of HAIs, the identification of gaps in research, and implementation science. The basic, epidemiological, and implementation science communities have joined forces to better define mechanisms and responsibilities for translating HAI research into practice. Challenges include the ongoing need for better evidence about intervention effectiveness, the growing implementation burden on healthcare providers and organizations, and challenges implementing certain practices. Although these HAI research and prevention practice activities are complex spanning multiple system functions and properties, HHS is making progress so that the right methods for addressing complex HAI problems at the interface of patient safety and clinical practice can emerge.

Deploying and measuring a risk and patient safety program.

Science.gov (United States)

Orel, Howard; McGroarty, Molly; Marchegiani, Heather

2017-01-01

Health care continues to evolve at a rapid rate. Over just the past decade, the industry has seen the introduction and widespread implementation of an electronic health record, increase in presence of nurse practitioners and physician assistants to help manage the shortage of physicians, and the introduction of accountable care organizations. It is with these changes that new challenges and opportunities emerge. One such challenge is the increase in the severity of medical malpractice claims throughout the nation. Another emerging challenge is the introduction of outcome-based reimbursements, with providers potentially losing a portion of their payment should the patient experience result in a preventable adverse event. These trends are resulting in providers continuously seeking innovative approaches to reducing risk and improving patient safety. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Safety distance for preventing hot particle ignition of building insulation materials

Directory of Open Access Journals (Sweden)

Jiayun Song

2014-01-01

Full Text Available Trajectories of flying hot particles were predicted in this work, and the temperatures during the movement were also calculated. Once the particle temperature decreased to the critical temperature for a hot particle to ignite building insulation materials, which was predicted by hot-spot ignition theory, the distance particle traveled was determined as the minimum safety distance for preventing the ignition of building insulation materials by hot particles. The results showed that for sphere aluminum particles with the same initial velocities and diameters, the horizontal and vertical distances traveled by particles with higher initial temperatures were higher. Smaller particles traveled farther when other conditions were the same. The critical temperature for an aluminum particle to ignite rigid polyurethane foam increased rapidly with the decrease of particle diameter. The horizontal and vertical safety distances were closely related to the initial temperature, diameter and initial velocity of particles. These results could help update the safety provision of firework display.

Sunburn: Treatment and Prevention

Science.gov (United States)

... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...

Proceedings of the Second NASA Aviation Safety Program Weather Accident Prevention Review

Science.gov (United States)

Martzaklis, K. Gus (Compiler)

2003-01-01

The Second NASA Aviation Safety Program (AvSP) Weather Accident Prevention (WxAP) Annual Project Review held June 5-7, 2001, in Cleveland, Ohio, presented the NASA technical plans and accomplishments to the aviation community. NASA-developed technologies presented included an Aviation Weather Information System with associated digital communications links, electronic atmospheric reporting technologies, forward-looking turbulence warning systems, and turbulence mitigation procedures. The meeting provided feedback and insight from the aviation community of diverse backgrounds and assisted NASA in steering its plans in the direction needed to meet the national safety goal of 80-percent reduction of aircraft accidents by 2007. The proceedings of the review are enclosed.

Introduction of structural health and safety monitoring warning systems for Shenzhen-Hong Kong Western Corridor Shenzhen Bay Bridge

Science.gov (United States)

Li, N.; Zhang, X. Y.; Zhou, X. T.; Leng, J.; Liang, Z.; Zheng, C.; Sun, X. F.

2008-03-01

Though the brief introduction of the completed structural health and safety monitoring warning systems for Shenzhen-Hongkong western corridor Shenzhen bay highway bridge (SZBHMS), the self-developed system frame, hardware and software scheme of this practical research project are systematically discussed in this paper. The data acquisition and transmission hardware and the basic software based on the NI (National Instruments) Company virtual instruments technology were selected in this system, which adopted GPS time service receiver technology and so on. The objectives are to establish the structural safety monitoring and status evaluation system to monitor the structural responses and working conditions in real time and to analyze the structural working statue using information obtained from the measured data. It will be also provided the scientific decision-making bases for the bridge management and maintenance. Potential technical approaches to the structural safety warning systems, status identification and evaluation method are presented. The result indicated that the performance of the system has achieved the desired objectives, ensure the longterm high reliability, real time concurrence and advanced technology of SZBHMS. The innovate achievement which is the first time to implement in domestic, provide the reference for long-span bridge structural health and safety monitoring warning systems design.

Introduction to South Africa's safety classification

Energy Technology Data Exchange (ETDEWEB)

Kang, Kyung Jun; Wu, Sang Ik; Yoon, Juh Yeon [KAERI, Daejeon (Korea, Republic of)

2012-10-15

The safety functions of nuclear reactor facilities such as research reactors have to be maintained for all initiating events, incidents and accidents. From the position of licensee, it is a very important issue and design challenge to meet the licensing requirements for the final goal of proper safety functions from nuclear regulator. This paper intends to introduce and understand South Africa's licensing requirements and processing for safety classification of SSCs. South Africa's licensing requirements are shown in Table 1. Three categories A, B and C are categorized based on the occurrence frequency and the dose limitation of worker and public exposure. The Defense in Depth (DiD) and ALARA principle are forced to apply to a nuclear reactor facility design. Also, South Africa's safety and quality class compare with that of ANSI 51.1.

Young people and snowmobiling in northern Norway: accidents, injury prevention and safety strategies.

Science.gov (United States)

Mehus, Grete; Mehus, Alf Gunnar; Germeten, Sidsel; Henriksen, Nils

2016-01-01

Snowmobiling among young people in Scandinavia frequently leads to accidents and injuries. Systematic studies of accidents exist, but few studies have addressed young drivers' experiences. The aim of this article is to reveal how young people experience and interpret accidents, and to outline a prevention strategy. Thirty-one girls and 50 boys aged 16-23 years from secondary schools in Northern Norway and on Svalbard, a Norwegian archipelago in the Arctic Ocean, participated in 17 focus groups segregated by gender. A content analysis identified themes addressing the research questions. Participants described risk as being inherent to snowmobiling, and claimed that accidents followed from poor risk assessment, careless driving or mishaps. Evaluation of accidents and recommendations for preventive measures varied. Girls acknowledged the risks and wanted knowledge about outdoor life, navigation and external risks. Boys underestimated or downplayed the risks, and wanted knowledge about safety precautions while freeriding. Both genders were aware of how and why accidents occurred, and took precautions. Boys tended to challenge norms in ways that contradict the promotion of safe driving behaviour. Stories of internal justice regarding driving under the influence of alcohol occurred. Adolescents are aware of how accidents occur and how to avoid them. Injury prevention strategies should include a general population strategy and a high-risk strategy targeted at extreme risk-seekers. Drivers, snowmobilers' organisations and the community should share local knowledge in an effort to define problem areas, set priorities and develop and implement preventive measures. Risk prevention should include preparation of safe tracks and focus on safety equipment and safe driving behaviour, but should also pay increased attention to the potential of strengthening normative regulation within peer groups regarding driving behaviour and mutual responsibility for preventing accidents.

Pre- and postharvest preventive measures and intervention strategies to control microbial food safety hazards of fresh leafy vegetables.

Science.gov (United States)

Gil, Maria I; Selma, Maria V; Suslow, Trevor; Jacxsens, Liesbeth; Uyttendaele, Mieke; Allende, Ana

2015-01-01

This review includes an overview of the most important preventive measures along the farm to fork chain to prevent microbial contamination of leafy greens. It also includes the technological and managerial interventions related to primary production, postharvest handling, processing practices, distribution, and consumer handling to eliminate pathogens in leafy greens. When the microbiological risk is already present, preventive measures to limit actual contamination events or pathogen survival are considered intervention strategies. In codes of practice the focus is mainly put on explaining preventive measures. However, it is also important to establish more focused intervention strategies. This review is centered mainly on leafy vegetables as the commodity identified as the highest priority in terms of fresh produce microbial safety from a global perspective. There is no unique preventive measure or intervention strategy that could be applied at one point of the food chain. We should encourage growers of leafy greens to establish procedures based on the HACCP principles at the level of primary production. The traceability of leafy vegetables along the chain is an essential element in ensuring food safety. Thus, in dealing with the food safety issues associated with fresh produce it is clear that a multidisciplinary farm to fork strategy is required.

A model for managing cold-related health and safety risks at workplaces.

Science.gov (United States)

Risikko, Tanja; Mäkinen, Tiina M; Påsche, Arvid; Toivonen, Liisa; Hassi, Juhani

2003-05-01

Cold conditions increase health and safety risks at work in several ways. The effects of cold have not been sufficiently taken into consideration in occupational safety and health practices. A systematic model and methods were developed for managing cold-related health and safety risks at workplaces. The development work was performed, in a context-bound manner, in pilot industries and workplaces. The model can be integrated into the company's occupational health and safety management system, such as OHSAS 18001. The cold risks are identified and assessed by using a checklist. The preventive measures are systematically planned in a written form specifically produced for cold workplaces. It includes the organisational and technical preventive measures, protective clothing and personal protective equipment, as well as training and information of the personnel. According to the model, all the workers, foremen, occupational safety personnel and occupational health care personnel are trained to recognise the cold risks and to conduct preventive actions. The developed model was evaluated in the context of cold outdoor (construction) and indoor work (fish processing), and by occupational health and safety professionals. According to the feedback, the model and methods were easy to use after a one-day introduction session. The continuum between the cold risk assessment and management worked well, although there was some overlap in the documentation. The cold risk management model and its methods form an essential part of ISO CD 15743 Strategy for risk assessment, management and work practice in cold environments.

Spillover Effects of Drug Safety Warnings on Preventive Health Care Use

DEFF Research Database (Denmark)

Daysal, N. Meltem; Orsini, Chiara

2015-01-01

We examine how new medical information on drug safety impacts preventive health care use. We exploit the release of the findings of the Women’s Health Initiative Study (WHIS) – the largest randomized controlled trial of women’s health – which demonstrated in 2002 the health risks associated...... with the long-term use of hormone replacement therapy (HRT). We first show that, after the release of the WHIS findings, HRT use dropped sharply among post-menopausal women. We then estimate the spillover effects of the WHIS findings on preventive care by means of a difference-in-differences methodology...... comparing changes in preventive care use among 60 to 69 year-old women (who have high rates of HRT use) with the change among women aged 75 and above (who have much lower rates of HRT use). Using data from the Behavioral Risk Factor Surveillance System for the period 1998–2007, we find that women aged 60...

Introduction to 'International Handbook of Criticality Safety Benchmark Experiments'

International Nuclear Information System (INIS)

Komuro, Yuichi

1998-01-01

The Criticality Safety Benchmark Evaluation Project (CSBEP) was initiated in 1992 by the United States Department of Energy. The project quickly became an international effort as scientists from other interested countries became involved. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is now an official activity of the Organization for Economic Cooperation and Development-Nuclear Energy Agency (OECD-NEA). 'International Handbook of Criticality Safety Benchmark Experiments' was prepared and is updated year by year by the working group of the project. This handbook contains criticality safety benchmark specifications that have been derived from experiments that were performed at various nuclear critical facilities around the world. The benchmark specifications are intended for use by criticality safety engineers to validate calculation techniques used. The author briefly introduces the informative handbook and would like to encourage Japanese engineers who are in charge of nuclear criticality safety to use the handbook. (author)

A Targeted E-Learning Program for Surgical Trainees to Enhance Patient Safety in Preventing Surgical Infection

Science.gov (United States)

McHugh, Seamus Mark; Corrigan, Mark; Dimitrov, Borislav; Cowman, Seamus; Tierney, Sean; Humphreys, Hilary; Hill, Arnold

2010-01-01

Introduction: Surgical site infection accounts for 20% of all health care-associated infections (HCAIs); however, a program incorporating the education of surgeons has yet to be established across the specialty. Methods: An audit of surgical practice in infection prevention was carried out in Beaumont Hospital from July to November 2009. An…

Prevent recurrence of nuclear disaster (2). Reconstruction of safety logic diagram of nuclear system

International Nuclear Information System (INIS)

Miyano, Hiroshi; Sekimura, Naoto; Nakamura, Takao; Narumiya, Yoshiyuki

2012-01-01

On March 11, 2011, severe accident occurred at multi units of nuclear power caused by natural disaster, which was the first of nuclear power in the world, and lead to nuclear disaster which contaminated a wide range of land and caused surrounding residents to evacuate for a long-term. Since Cyuetsu-oki earthquake and before this accident, Atomic Energy Society of Japan had activities to investigate 'safety of nuclear system' against earthquake beyond any expectation, identify research items and work out roadmap on future research activities. Correspondence against tsunami such as this accident was discussed but not included as proposal because of low tsunami hazards awareness. Based on this reflection and to prevent recurrence of nuclear disaster, reconsideration of nuclear safety from the standpoint of defense-in-depth against hazards beyond any expectation had been performed and proposed to establish roadmap for its realization. Basic principle of nuclear safety consisted of eleven principles so as to protect personnel and environment from harmful effects of radiation derived from nuclear facilities and their activities, which were categorized into three groups (responsibility and management system, personnel and environmental protection and prevention of accident initiation and effect mitigation). (T. Tanaka)

Safety distance for preventing hot particle ignition of building insulation materials

OpenAIRE

Jiayun Song; Supan Wang; Haixiang Chen

2014-01-01

Trajectories of flying hot particles were predicted in this work, and the temperatures during the movement were also calculated. Once the particle temperature decreased to the critical temperature for a hot particle to ignite building insulation materials, which was predicted by hot-spot ignition theory, the distance particle traveled was determined as the minimum safety distance for preventing the ignition of building insulation materials by hot particles. The results showed that for sphere ...

Expensive blood safety initiatives may offer less benefit than we think

DEFF Research Database (Denmark)

Kamper-Jørgensen, Mads; Hjalgrim, Henrik; Edgren, Gustaf

2010-01-01

Various blood safety initiatives have ensured a historically low risk of infection transmission through blood transfusion. Although further prevention of infection transmission is possible through, for example, nucleic acid testing and future introduction of pathogen inactivation, such initiative...... are very costly in relation to the benefit they offer. Although estimation of the cost-effectiveness requires detailed information about the survival of transfusion recipients, previous cost-effectiveness analyses have relied on incorrect survival assumptions....

Critical roles of orthopaedic surgeon leadership in healthcare systems to improve orthopaedic surgical patient safety.

Science.gov (United States)

Kuo, Calvin C; Robb, William J

2013-06-01

The prevention of medical and surgical harm remains an important public health problem despite increased awareness and implementation of safety programs. Successful introduction and maintenance of surgical safety programs require both surgeon leadership and collaborative surgeon-hospital alignment. Documentation of success of such surgical safety programs in orthopaedic practice is limited. We describe the scope of orthopaedic surgical patient safety issues, define critical elements of orthopaedic surgical safety, and outline leadership roles for orthopaedic surgeons needed to establish and sustain a culture of safety in contemporary healthcare systems. We identified the most common causes of preventable surgical harm based on adverse and sentinel surgical events reported to The Joint Commission. A comprehensive literature review through a MEDLINE(®) database search (January 1982 through April 2012) to identify pertinent orthopaedic surgical safety articles found 14 articles. Where gaps in orthopaedic literature were identified, the review was supplemented by 22 nonorthopaedic surgical references. Our final review included 36 articles. Six important surgical safety program elements needed to eliminate preventable surgical harm were identified: (1) effective surgical team communication, (2) proper informed consent, (3) implementation and regular use of surgical checklists, (4) proper surgical site/procedure identification, (5) reduction of surgical team distractions, and (6) routine surgical data collection and analysis to improve the safety and quality of surgical patient care. Successful surgical safety programs require a culture of safety supported by all six key surgical safety program elements, active surgeon champions, and collaborative hospital and/or administrative support designed to enhance surgical safety and improve surgical patient outcomes. Further research measuring improvements from such surgical safety systems in orthopaedic care is needed.

Efficacy and safety of human papillomavirus vaccine for primary prevention of cervical cancer: A review of evidence from phase III trials and national programs

Directory of Open Access Journals (Sweden)

Partha Basu

2013-01-01

Full Text Available The Human Papillomavirus (HPV vaccines have been widely introduced in the national immunization programs in most of the medium and high income countries following endorsement from national and international advisory bodies. HPV vaccine is unique and its introduction is challenging in many ways - it is the first vaccine developed to prevent any cancer, the vaccine is gender specific, it targets adolescent females who are difficult to reach by any health intervention programs. It is not unusual for such a vaccine to face scepticism and reservations not only from lay public but also from professionals in spite of the clinical trial results convincingly and consistently proving their efficacy and safety. Over the last few years millions of doses of the HPV vaccine have been administered round the world and the efficacy and safety data have started coming from the real life programs. A comprehensive cervical cancer control program involving HPV vaccination of the adolescent girls and screening of the adult women has been proved to be the most cost-effective approach to reduce the burden of cervical cancer. The present article discusses the justification of HPV vaccination in the backdrop of natural history of cervical cancer, the mechanism of action of the vaccines, efficacy and safety data from phase III randomized controlled trials as well as from the national immunization programs of various countries.

[Description of contributing factors in adverse events related to patient safety and their preventability].

Science.gov (United States)

Guerra-García, María Mercedes; Campos-Rivas, Beatriz; Sanmarful-Schwarz, Alexandra; Vírseda-Sacristán, Alicia; Dorrego-López, M Aránzazu; Charle-Crespo, Ángeles

2017-11-25

To assess the extent of healthcare related adverse events (AEs), their effect on patients, and their seriousness. To analyse the factors leading to the development of AEs, their relationship with the damage caused, and their degree of preventability. Retrospective descriptive study. Porriño, Pontevedra, Spain, Primary Care Service, from January-2014 to April-2016. Reported AEs were entered into the Patient Safety Reporting and Learning System (SiNASP). The variables measured were: Near Incident (NI) an occurrence with no effect or harm on the patient; Adverse Event (AE) an occurrence that affects or harms a patient. The level of harm is classified as minimal, minor, moderate, critical, and catastrophic. Preventability was classified as little evidence of being preventable, 50% preventable, and sound evidence of being preventable. percentages and Chi-squared test for qualitative variables; P<.05 with SPSS.15. SiNASP. Ethical considerations: approved by the Research Ethics Committee (2016/344). There were 166 recorded AEs (50.6% in males, and 46.4% in women. The mean age was 60.80years). Almost two-thirds 62.7% of AEs affected the patient, with 45.8% causing minimal damage, while 2.4% caused critical damages. Healthcare professionals were a contributing factor in 71.7% of the AEs, with the trend showing that poor communication and lack of protocols were related to the damage caused. Degree of preventability: 96.4%. Most AEs affected the patient, and were related to medication, diagnostic tests, and laboratory errors. The level of harm was related to communication problems, lack of, or deficient, protocols and a poor safety culture. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Global bike share: What the data tells us about road safety.

Science.gov (United States)

Fishman, Elliot; Schepers, Paul

2016-02-01

Bike share has emerged as a rapidly growing mode of transport in over 800 cities globally, up from just a handful in the 1990s. Some analysts had forecast a rise in the number of bicycle crashes after the introduction of bike share, but empirical research on bike share safety is rare. The goal of this study is to examine the impact of bike share programs on cycling safety. The paper has two substudies. Study 1 was a secondary analysis of longitudinal hospital injury data from the Graves et al. (2014) study. It compared cycling safety in cities that introduced bike share programs with cities that did not. Study 2 combined ridership data with crash data of selected North American and European cities to compare bike share users to other cyclists. Study 1 indicated that the introduction of a bike share system was associated with a reduction in cycling injury risk. Study 2 found that bike share users were less likely than other cyclists to sustain fatal or severe injuries. On a per kilometer basis, bike share is associated with decreased risk of both fatal and non-fatal bicycle crashes when compared to private bike riding. The results of this study suggest that concerns of decreased levels of cycling safety are unjustified and should not prevent decision makers from introducing public bike share schemes, especially if combined with other safety measures like traffic calming. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Nuclear Reactor RA Safety Report, Format and Contents

International Nuclear Information System (INIS)

1986-11-01

This is a new complete version of the safety report of nuclear reactor RA is made according to the recommendations of the IAEA. Report includes all the relevant data needed for evaluation of safe operation of this nuclear facility. Each of seven volumes of this report cover separate topics as follows: (1) introduction; (2) Site characteristics; (3) description of the reactor building and installations; (4) description of the reactor; (5) description of the coolant system; (6) description of the regulation and safety instrumentation; (7) description of the power supply system; (8) description of the auxiliary systems; (9) radiation protection issues; (10) radioactive waste management (11) reactor operation; (12) accident analysis during previous operation; (13) analysis of possible accident causes; (14) safety analysis and preventive actions: (15) analysis of significant accidents; (16) analysis of maximum possible accident; (17) environmental impact analysis in case of accident [sr

Safety requirements to the operation of hydropower plants; Sicherheit beim Betrieb von Wasserkraftwerken

Energy Technology Data Exchange (ETDEWEB)

Lux, Reinhard [Berufsgenossenschaft Energie Textil Elektro Medienerzeugnisse (BG ETEM), Koeln (Germany)

2011-07-01

Employers have to take into account various safety and health requirements relating to the design, construction, operation and maintenance of hydropower plants. Especially the diversity of the hydropower plant components requires the consideration of different safety and health aspects. In 2011 the ''Fachausschuss Elektrotechnik'' (expert committee electro-technics) of the institution for statutory accident insurance and prevention presented a new ''BG-Information'' dealing with ''Safe methods operating hydropower plants''. The following article gives an introduction into the conception and the essential requirements of this new BG-Information. (orig.)

Preventing hospital-acquired venous thromboembolism: Improving patient safety with interdisciplinary teamwork, quality improvement analytics, and data transparency.

Science.gov (United States)

Schleyer, Anneliese M; Robinson, Ellen; Dumitru, Roxana; Taylor, Mark; Hayes, Kimberly; Pergamit, Ronald; Beingessner, Daphne M; Zaros, Mark C; Cuschieri, Joseph

2016-12-01

Hospital-acquired venous thromboembolism (HA-VTE) is a potentially preventable cause of morbidity and mortality. Despite high rates of venous thromboembolism (VTE) prophylaxis in accordance with an institutional guideline, VTE remains the most common hospital-acquired condition in our institution. To improve the safety of all hospitalized patients, examine current VTE prevention practices, identify opportunities for improvement, and decrease rates of HA-VTE. Pre/post assessment. Urban academic tertiary referral center, level 1 trauma center, safety net hospital; all patients. We formed a multidisciplinary VTE task force to review all HA-VTE events, assess prevention practices relative to evidence-based institutional guidelines, and identify improvement opportunities. The task force developed an electronic tool to facilitate efficient VTE event review and designed decision-support and reporting tools, now integrated into the electronic health record, to bring optimal VTE prevention practices to the point of care. Performance is shared transparently across the institution. Harborview benchmarks process and outcome performance, including patient safety indicators and core measures, against hospitals nationally using Hospital Compare and Vizient data. Our program has resulted in >90% guideline-adherent VTE prevention and zero preventable HA-VTEs. Initiatives have resulted in a 15% decrease in HA-VTE and a 21% reduction in postoperative VTE. Keys to success include the multidisciplinary approach, clinical roles of task force members, senior leadership support, and use of quality improvement analytics for retrospective review, prospective reporting, and performance transparency. Ongoing task force collaboration with frontline providers is critical to sustained improvements. Journal of Hospital Medicine 2016;11:S38-S43. © 2016 Society of Hospital Medicine. © 2016 Society of Hospital Medicine.

A police education programme to integrate occupational safety and HIV prevention: protocol for a modified stepped-wedge study design with parallel prospective cohorts to assess behavioural outcomes

Science.gov (United States)

Strathdee, Steffanie A; Arredondo, Jaime; Rocha, Teresita; Abramovitz, Daniela; Rolon, Maria Luisa; Patiño Mandujano, Efrain; Rangel, Maria Gudelia; Olivarria, Horcasitas Omar; Gaines, Tommi; Patterson, Thomas L; Beletsky, Leo

2015-01-01

Introduction Policing practices are key drivers of HIV among people who inject drugs (PWID). This paper describes the protocol for the first study to prospectively examine the impact of a police education programme (PEP) to align law enforcement and HIV prevention. PEPs incorporating HIV prevention (including harm reduction programmes like syringe exchange) have been successfully piloted in several countries but were limited to brief pre–post assessments; the impact of PEPs on policing behaviours and occupational safety is unknown. Objectives Proyecto ESCUDO (SHIELD) aims to evaluate the efficacy of the PEP on uptake of occupational safety procedures, as assessed through the incidence of needle stick injuries (NSIs) (primary outcome) and changes in knowledge of transmission, prevention and treatment of HIV and viral hepatitis; attitudes towards PWID, adverse behaviours that interfere with HIV prevention and protective behaviours (secondary outcomes). Methods/analysis ESCUDO is a hybrid type I design that simultaneously tests an intervention and an implementation strategy. Using a modified stepped-wedge design involving all active duty street-level police officers in Tijuana (N=∼1200), we will administer one 3 h PEP course to groups of 20–50 officers until the entire force is trained. NSI incidence and geocoded arrest data will be assessed from department-wide de-identified data. Of the consenting police officers, a subcohort (N=500) will be randomly sampled from each class to undergo pre-PEP and post-PEP surveys with a semiannual follow-up for 2 years to assess self-reported NSIs, attitudes and behaviour changes. The impact on PWIDs will be externally validated through a parallel cohort of Tijuana PWIDs. Ethics/dissemination Research ethics approval was obtained from the USA and Mexico. Findings will be disseminated through open access to protocol materials through the Law Enforcement and HIV Network. Trial registration number NCT02444403. PMID:26260350

Preventing Child Sexual Abuse: Body Safety Training for Young Children in Turkey.

Science.gov (United States)

Citak Tunc, Gulseren; Gorak, Gulay; Ozyazicioglu, Nurcan; Ak, Bedriye; Isil, Ozlem; Vural, Pinar

2018-06-01

The "Body Safety Training Program" is an education program aimed at ensuring children are informed about their body and acquire self-protection skills. In this study, a total of 83 preschoolers were divided into experimental and control groups; based on a power analysis, 40 children comprised the experimental group, while 43 children comprised the control group. The "Body Safety Training Programme" was translated into Turkish and content validity was determined regarding the language and cultural appropriateness. The "What If Situations Test" (WIST) was administered to both groups before and after the training. Mann-Whitney U Test, Kruskal-Wallis Variance Analysis, and the Wilcoxon Signed Ranks Test were used to compare between the groups and the Spearman correlation analysis was used to determine the strength of the relationship between the dependent and independent variable. The differences between the pretest and posttest scores for the subscales (appropriate recognition, inappropriate recognition, say, do, tell, and reporting skills), and the personal safety questionnaire (PSQ) score means for the children in the experimental group were found to be statistically significant (p Body Safety Training programme" is effective in increasing the child sexual abuse prevention and self-protection skills in Turkish young children.

Aerobasics–An Introduction to Aeronautics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 1. Aerobasics - An Introduction to Aeronautics - Safety in Aviation. S P Govinda Raju. Series Article Volume 15 Issue 1 January 2010 pp 64-75. Fulltext. Click here to view fulltext PDF. Permanent link:

European BWR R and D cluster for innovative passive safety systems

International Nuclear Information System (INIS)

Hicken, E.F.; Lensa, W. von

1996-01-01

The main technological innovation trends for future nuclear power plants tend towards a broader use of passive safety systems for the prevention, mitigation and managing of severe accident scenarios. Several approaches have been undertaken in a number of European countries to study and demonstrate the feasibility and charateristics of innovative passive safety systems. The European BWR R and D Cluster combines those experimental and analytical efforts that are mainly directed to the introduction of passive safety systems into boiling water reactor technology. The Cluster is grouped around thermohydraulic test facilities in Europe for the qualification of innovative BWR safety systems, also taking into account especially the operating experience of the nuclear power plant Dodewaard and other BWRs, which already incorporated some passive safety features. The background, the objectives, the structure of the project and the work programme are presented in this paper as well as an outline of the significance of the expected results. (orig.) [de

Saccharomyces boulardii probiotic-associated fungemia: questioning the safety of this preventive probiotic's use.

Science.gov (United States)

Martin, Isabella W; Tonner, Rita; Trivedi, Julie; Miller, Heather; Lee, Richard; Liang, Xinglun; Rotello, Leo; Isenbergh, Elena; Anderson, Jennifer; Perl, Trish; Zhang, Sean X

2017-03-01

We report a case of fungemia in an immunocompetent patient after administration of probiotic containing Saccharomyces boulardii. We demonstrated the strain relatedness of the yeast from the probiotic capsule and the yeast causing fungal infection using genomic and proteomic typing methods. Our study questions the safety of this preventative biotherapy. Copyright © 2016 Elsevier Inc. All rights reserved.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Study on nuclear power introduction into Vietnam

International Nuclear Information System (INIS)

Vuong Huu Tan

2000-01-01

The report presents main results of the study on nuclear power introduction into Vietnam which have been carried out at Vietnam Atomic Energy Commission in collaboration with Ministry of Industry of Vietnam and other countries like Japan, Canada and Korea. The study covers all topics related to the nuclear power introduction into Vietnam such as electricity demands and supply, economics, finance, technology, safety, manpower, site selection etc. (author)

Professional autobiography of Professor Leif Svanström - with a focus on injury prevention and safety promotion.

Science.gov (United States)

Svanström, Leif

2012-01-01

Professor Svanström has spent about forty-five years in the field of Social Medicine and Health and Safety Promotion. His main lines of research and teaching are Injury Epidemiology and Safety Promotion. In the 1960s, he conducted a number of descriptive and analytical studies, and in the 1970s began to address home and occupational injuries. In 1974, he introduced the community approach to safety promotion, encapsulated in the Falköping Model, which has heavily influenced Swedish and international community safety work. Under his leadership of the Research Group on Injury Prevention and Safety Promotion at the Karolinska Institutet in Stockholm, Sweden, more than 30 doctorates have been awarded. His work as Head of the WHO Collaborating Centre on Community Safety Promotion has led to the establishment of Safe Communities worldwide.

Psychometrics of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults.

Science.gov (United States)

Tomita, Machiko R; Saharan, Sumandeep; Rajendran, Sheela; Nochajski, Susan M; Schweitzer, Jo A

2014-01-01

OBJECTIVE. To identify psychometric properties of the Home Safety Self-Assessment Tool (HSSAT) to prevent falls in community-dwelling older adults. METHOD. We tested content validity, test-retest reliability, interrater reliability, construct validity, convergent and discriminant validity, and responsiveness to change. RESULTS. The content validity index was .98, the intraclass correlation coefficient for test-retest reliability was .97, and the interrater reliability was .89. The difference on identified risk factors between the use and nonuse of the HSSAT was significant (p = .005). Convergent validity with the Centers for Disease Control and Prevention Home Safety Checklist was high (r = .65), and discriminant validity with fear of falling was very low (r = .10). The responsiveness to change was moderate (standardized response mean = 0.57). CONCLUSION. The HSSAT is a reliable and valid instrument to identify fall risks in a home environment, and the HSSAT booklet is effective as educational material leading to improvement in home safety. Copyright © 2014 by the American Occupational Therapy Association, Inc.

A reading of the crisis of prevention activities: current paradoxes and future challenges

Directory of Open Access Journals (Sweden)

Rodolfo Andrade de Gouveia Vilela

2017-12-01

Full Text Available Introduction: The activity of occupational health and safety professionals is in a paradoxical situation considering, among other aspects, the productivity context, which gives low priority to safety and health, the limitation imposed by the hegemonic conceptual references in the field, the limitation of these professionals’ power to act and the highly conflicting and complex character of the occupational world. Objective: In essay form, the article, in dialog with the literature of the field, proposes to reflect on the impasses and challenges of the prevention field. Method: The reflections are based on the experience of the authors both in the practical area as also in research, teaching and extension activities in the field of health surveillance and workers’ safety. Results: Even though this field of activity has been recognized as a specialized and legal area for more than 40 years in the country, the magnitude of the data concerning occupational and industrial accidents reveals the limitations and difficulties that these professionals face, and justifies the importance of the analysis of current practices in order to understand the contradictions that lie at the root of the difficulties to achieve prevention. Conclusion: Citizens could pressure corporations to improve their safety practices and concepts. State can also be pressured to create new safety policies.

Construction safety: Can management prevent all accidents or are workers responsible for their own actions?

International Nuclear Information System (INIS)

Cotten, G.B.; Jenkins, S.L.

1997-01-01

The construction industry has struggled for many years with the answer to the question posed in the title: Can Management Prevent All Accidents or Are Workers Responsible for Their Own Actions? In the litigious society that we live, it has become more important to find someone open-quotes at faultclose quotes for an accident than it is to find out how we can prevent it from ever happening again. Most successful companies subscribe to the theme that open-quotes all accidents can be prevented.close quotes They institute training and qualification programs, safe performance incentives, and culture-change-driven directorates such as the Voluntary Protection Program (VPP); yet we still see construction accidents that result in lost time, and occasionally death, which is extremely costly in the shortsighted measure of money and, in real terms, impact to the worker''s family. Workers need to be properly trained in safety and health protection before they are assigned to a job that may expose them to safety and health hazards. A management committed to improving worker safety and health will bring about significant results in terms of financial savings, improved employee morale, enhanced communities, and increased production. But how can this happen, you say? Reduction in injury and lost workdays are the rewards. A decline in reduction of injuries and lost workdays results in lower workers'' compensation premiums and insurance rates. In 1991, United States workplace injuries and illnesses cost public and private sector employers an estimated $62 billion in workers'' compensation expenditures

The development of an inherent safety approach to the prevention of domino accidents.

Science.gov (United States)

Cozzani, Valerio; Tugnoli, Alessandro; Salzano, Ernesto

2009-11-01

The severity of industrial accidents in which a domino effect takes place is well known in the chemical and process industry. The application of an inherent safety approach for the prevention of escalation events leading to domino accidents was explored in the present study. Reference primary scenarios were analyzed and escalation vectors were defined. Inherent safety distances were defined and proposed as a metric to express the intensity of the escalation vectors. Simple rules of thumb were presented for a preliminary screening of these distances. Swift reference indices for layout screening with respect to escalation hazard were also defined. Two case studies derived from existing layouts of oil refineries were selected to understand the potentialities coming from the application in the methodology. The results evidenced that the approach allows a first comparative assessment of the actual domino hazard in a layout, and the identification of critical primary units with respect to escalation events. The methodology developed also represents a useful screening tool to identify were to dedicate major efforts in the design of add-on measures, optimizing conventional passive and active measures for the prevention of severe domino accidents.

Safety of oral tenofovir disoproxil fumarate-based pre-exposure prophylaxis for HIV prevention.

Science.gov (United States)

Mugwanya, Kenneth K; Baeten, Jared M

2016-01-01

Tenofovir disoproxil fumarate (TDF)-based pre-exposure prophylaxis is a novel HIV prevention strategy for individuals at increased sexual risk for HIV infection. For any biomedical prevention intervention, the bar for tolerating adverse effects in healthy persons is high compared to therapeutic interventions. We provide a concise summary of the clinical safety of TDF-based pre-exposure prophylaxis with focus on TDF-related effects on tolerability, kidney function, bone density, HIV resistance, sexual and reproductive health. The evidence base for this review is derived from a literature search of both randomized and observational studies evaluating efficacy and safety of TDF-based PrEP, TDF alone or in combination with emtricitabine, identified from PUBMED and EMBASE electronic databases, clinicaltrials.gov and major HIV conferences. TDF-based pre-exposure prophylaxis is a potent intervention against HIV acquisition when taken which is generally safe and well tolerated. The risk of the small, non-progressive, and reversible decline in glomerular filtration rate and bone mineral density as well as the potential selection for drug resistance associated with PrEP are outweighed, at the population level and broadly for individuals, by PrEP's substantial reduction in the risk of HIV infection.

The village/commune safety policy and HIV prevention efforts among key affected populations in Cambodia: finding a balance

Directory of Open Access Journals (Sweden)

Thomson Nick

2012-07-01

Full Text Available Abstract The Village/Commune Safety Policy was launched by the Ministry of Interior of the Kingdom of Cambodia in 2010 and, due to a priority focus on “cleaning the streets”, has created difficulties for HIV prevention programs attempting to implement programs that work with key affected populations including female sex workers and people who inject drugs. The implementation of the policy has forced HIV program implementers, the UN and various government counterparts to explore and develop collaborative ways of delivering HIV prevention services within this difficult environment. The following case study explores some of these efforts and highlights the promising development of a Police Community Partnership Initiative that it is hoped will find a meaningful balance between the Village/Commune Safety Policy and HIV prevention efforts with key affected populations in Cambodia.

Steel Erection Safety. Module SH-39. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on steel erection safety is one of 50 modules concerned with job safety and health. This module identifies typical jobsite hazards encountered by steel erectors, as well as providing safe job procedures for general and specific construction activities. Following the introduction, 11 objectives (each keyed to a page in the text)…

Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

Science.gov (United States)

Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

2013-02-01

Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls

FMECA application to Rainfall Hazard prevention in olive trees growings

Science.gov (United States)

Buendia-Buendía, F. S.; Bermudez, R.; Tarquis, A. M.; Andina, D.

2010-05-01

The FMECA (Failure Mode Effects and Criticality Analysis) is a broadly extended System Safety tool applied in industries as Aerospace in order to prevent hazards. This methodology studies the different failure modes of a system and try to mitigate them in a systematic procedure. In this paper this tool is applied in order to mitigate economical impact hazards derived from Rainfalls to olive trees growing in Granada (Spain), understanding hazard from the System Safety perspective (Any real or potential condition that can cause injury, illness, or death to personnel; damage to or loss of a system, equipment or property; or damage to the environment). The work includes a brief introduction to the System Safety and FMECA methodologies, applying then these concepts to analyze the Olive trees as a system and identify the hazards during the different stages of the whole life cycle plant production.

Safety issues and updates under MR environments

Energy Technology Data Exchange (ETDEWEB)

Kim, Soo Jung; Kim, Kyung Ah, E-mail: bellenina@daum.net

2017-04-15

Highlights: • Unexpected biological effects can occur within stronger magnetic fields. • MR safety for MR conditional items is not guaranteed beyond the tested conditions. • Updated knowledge about MR-related safety is important for a safe MR environment. - Abstract: Magnetic resonance (MR) imaging is a useful imaging tool with superior soft tissue contrast for diagnostic evaluation. The MR environments poses unique risks to patients and employees differently from ionizing radiation exposure originated from computed tomography and plain x-ray films. The technology associated with MR system has evolved continuously since its introduction in the late 1970s. MR systems have advanced with static magnetic fields, faster and stronger gradient magnetic fields and more powerful radiofrequency transmission coils. Higher field strengths of MR offers greater signal to noise capability and better spatial resolution, resulting in better visualization of anatomic detail, with a reduction in scan time. With the rapid evolution of technology associated with MR, we encounter new MR-related circumstances and unexpected dangerous conditions. A comprehensive update of our knowledge about MR safety is necessary to prevent MR-related accidents and to ensure safety for patients and staff associated with MR. This review presents an overview about MR-related safety issues and updates.

Prevent recurrence of nuclear disaster (3). Agenda on nuclear safety from earthquake engineering

International Nuclear Information System (INIS)

Kameda, Hiroyuki; Takada, Tsuyoshi; Ebisawa, Katsumi; Nakamura, Susumu

2012-01-01

Based on results of activities of committee on seismic safety of nuclear power plants (NPPs) of Japan Association for Earthquake Engineering, which started activities after Chuetsu-oki earthquake and then experienced Great East Japan Earthquake, (under close collaboration with the committee of Atomic Energy Society of Japan started activities simultaneously), and taking account of further development of concept, agenda on nuclear safety were proposed from earthquake engineering. In order to prevent recurrence of nuclear disaster, individual technical issues of earthquake engineering and comprehensive issues of integration technology, multidisciplinary collaboration and establishment of technology governance based on them were of prime importance. This article described important problems to be solved; (1) technical issues and mission of seismic safety of NPPs, (2) decision making based on risk assessment - basis of technical governance, (3) framework of risk, design and regulation - framework of required technology governance, (4) technical issues of earthquake engineering for nuclear safety, (5) role of earthquake engineering in nuclear power risk communication and (6) importance of multidisciplinary collaboration. Responsibility of engineering would be attributed to establishment of technology governance, cultivation of individual technology and integration technology, and social communications. (T. Tanaka)

Improving patient safety through a clinical audit spiral: prevention of wrong tooth extraction in orthodontics.

Science.gov (United States)

Anwar, H; Waring, D

2017-07-07

Introduction With an increasing demand to improve patient safety within the NHS, it is important to ensure that measures are undertaken to continually improve patient care. Wrong site surgery has been defined as a 'never event'. This article highlights the importance of preventing wrong tooth extraction within orthodontics through an audit spiral over five years investigating the accuracy and clarity of orthodontic extraction letters at the University Dental Hospital of Manchester.Aims To examine compliance with the standards for accuracy and clarity of extraction letters and the incidence of wrong tooth extractions, and to increase awareness of the errors that can occur with extraction letters and of the current guidelines.Method A retrospective audit was conducted examining extraction letters sent to clinicians outside the department.Results It can be seen there has been no occurrence of a wrong site tooth extraction. The initial audit highlighted issues in conformity, with it falling below expected standards. Cycle two generally demonstrated a further reduction in compliance. Cycle three appeared to result in an increase in levels of compliance. Cycles 4 and 5 have demonstrated gradual improvements. However, it is noteworthy that in all cycles the audit standards were still not achieved, with the exception of no incidences of the incorrect tooth being extracted.Conclusion This audit spiral demonstrates the importance of long term re-audit to aim to achieve excellence in clinical care. There has been a gradual increase in standards through each audit.

A transdisciplinary focus on drug abuse prevention: an introduction.

Science.gov (United States)

Sussman, Steve; Stacy, Alan W; Johnson, C Anderson; Pentz, Mary Ann; Robertson, Elizabeth

2004-01-01

This article introduces the scope of the Special Issue. A variety of scientific disciplines are brought together to establish theoretical integration of the arenas of drug use, misuse, "abuse," and drug misuse prevention. Transdisciplinary scientific collaboration (TDSC) is utilized as a process of integration. Introductory comments regarding the strengths and limitations of TDSC are presented. Then, the relevance of genetics to substance misuse and substance misuse prevention is presented. Next, the relevance of cognition for prevention is discussed. Specifically, neurologically plausible distinctions in cognition and implicit cognition and their relevance for prevention are discussed. At a relatively molar social-level of analysis, social network theory, systems dynamic models, geographic information systems models, cultural psychology, and political science approaches to drug misuse and its prevention are introduced. The uses of both quantitative and qualitative statistical approaches to prevention are mentioned next. Finally, targeted prevention, bridging the efficacy-effectiveness gap, and a statement on overcoming disbalance round out the Special Issue. The bridges created will serve to propel drug misuse "prevention science" forward in the years to come. Advances in understanding etiological issues, translation to programs, and ecological fit of programming are desired results.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

Science.gov (United States)

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Chinese Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (French Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Arabic Ed.)

International Nuclear Information System (INIS)

2012-01-01

On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

School-Based and Community-Based Gun Safety Educational Strategies for Injury Prevention.

Science.gov (United States)

Holly, Cheryl; Porter, Sallie; Kamienski, Mary; Lim, Aubrianne

2018-05-01

Nearly 1,300 children in the United States die because of firearm-related injury each year and another 5,790 survive gunshot wounds, making the prevention of firearm-related unintentional injury to children of vital importance to families, health professionals, and policy makers. To systematically review the evidence on school-based and community-based gun safety programs for children aged 3 to 18 years. Systematic review. Twelve databases were searched from their earliest records to December 2016. Interventional and analytic studies were sought, including randomized controlled trials, quasi-experimental studies, as well as before-and-after studies or cohort studies with or without a control that involved an intervention. The low level of evidence, heterogeneity of studies, and lack of consistent outcome measures precluded a pooled estimate of results. A best evidence synthesis was performed. Results support the premise that programs using either knowledge-based or active learning strategies or a combination of these may be insufficient for teaching gun safety skills to children. Gun safety programs do not improve the likelihood that children will not handle firearms in an unsupervised situation. Stronger research designs with larger samples are needed to determine the most effective way to transfer the use of the gun safety skills outside the training session and enable stronger conclusions to be drawn.

Crime Prevention through Environmental Design (CPTED) Characteristics Associated with Violence and Safety in Middle Schools

Science.gov (United States)

Vagi, Kevin J.; Stevens, Mark R.; Simon, Thomas R.; Basile, Kathleen C.; Carter, Sherry P.; Carter, Stanley L.

2018-01-01

Background: This study used a new Crime Prevention Through Environmental Design (CPTED) assessment tool to test the associations between physical attributes of schools and violence-related behaviors and perceptions of students. Methods: Data were collected from 4717 students from 50 middle schools. Student perceptions of risk and safety, and…

Computer technologies for industrial risk prevention and emergency management

International Nuclear Information System (INIS)

Balduccelli, C.; Bologna, S.; Di Costanzo, G.; Vicoli, G.

1996-07-01

This document provides an overview about problems related to the engineering of computer based systems for industrial risk prevention and emergency management. Such systems are rather complex and subject to precise reliability and safety requirements. With the evolution of informatic technologies, such systems are becoming to be the means for building protective barriers for reduction of risk associated with plant operations. For giving more generality to this document, and for not concentrating on only a specific plant, the emergency management systems will be dealt with more details than ones for accident prevention. The document is organized in six chapters. Chapter one is an introduction to the problem and to its state of art, with particular emphasis to the aspects of safety requirements definition. Chapter two is an introduction to the problems related to the emergency management and to the training of operators in charge of this task. Chapter three deals in details the topic of the Training Support Systems, in particular about MUSTER (multi-user system for training and evaluation of environmental emergency response) system. Chapter four deals in details the topic of decision support systems, in particular about ISEM (information technology support for emergency management) system. Chapter five illustrates an application of support to the operators of Civil Protection Department for the management of emergencies in the fields of industrial chemical. Chapter six is about a synthesis of the state of art and the future possibilities, identifying some research and development activities more promising for the future

From learning from accidents to teaching about accident causation and prevention: Multidisciplinary education and safety literacy for all engineering students

International Nuclear Information System (INIS)

Saleh, Joseph H.; Pendley, Cynthia C.

2012-01-01

In this work, we argue that system accident literacy and safety competence should be an essential part of the intellectual toolkit of all engineering students. We discuss why such competence should be taught and nurtured in engineering students, and provide one example for how this can be done. We first define the class of adverse events of interest as system accidents, distinct from occupational accidents, through their (1) temporal depth of causality and (2) diversity of agency or groups and individuals who influence or contribute to the accident occurrence/prevention. We then address the question of why the interest in this class of events and their prevention, and we expand on the importance of system safety literacy and the contributions that engineering students can make in the long-term towards accident prevention. Finally, we offer one model for an introductory course on accident causation and system safety, discuss the course logistics, material and delivery, and our experience teaching this subject. The course starts with the anatomy of accidents and is grounded in various case studies; these help illustrate the multidisciplinary nature of the subject, and provide the students with the important concepts to describe the phenomenology of accidents (e.g., initiating events, accident precursor or lead indicator, and accident pathogen). More importantly, the case studies invite a deep reflection on the underlying failure mechanisms, their generalizability, and the various safety levers for accident prevention. The course then proceeds to an exposition of defense-in-depth, safety barriers and principles, essential elements for an education in accident prevention, and it concludes with a presentation of basic concepts and tools for uncertainty and risk analysis. Educators will recognize the difficulties in designing a new course on such a broad subject. It is hoped that this work will invite comments and contributions from the readers, and that the journal will

Workplace Safety and Health Topics: Safety & Prevention

Science.gov (United States)

... 1, 2018 Content source: National Institute for Occupational Safety and Health Education and Information Division Email Recommend Tweet YouTube Instagram Listen Watch RSS ABOUT About CDC Jobs Funding LEGAL Policies Privacy FOIA No Fear Act OIG 1600 Clifton Road Atlanta , GA 30329-4027 USA 800-CDC-INFO ( ...

Evaluation of safety management in an Appliances manufacturing company

Directory of Open Access Journals (Sweden)

F. Golbabaei

2015-01-01

Full Text Available Introduction: Prevention of accidents and work related diseases, are not allowed regardless of the safety of employees, customers, contractors and other persons. Assessment of individual safety management activities could reduce many losses. Present study aimed to evaluate the safety management of a household appliance manufacturing company.  .Material and Method: This study has done in a household appliance manufacturing company in Damavand city. Two questionnaires were firstly designed based on the weighted scores. The questionnaire 1 consisted of 4 indicators: Safety of machinery, Electrical safety, Risk assessment and Fire safety. Questionnaire 2 consisted of 11 sub indicators. Both questionnaires were completed by 30 HSE experts and supervisors. Reliability of questionnaires was based on cronbachs alpha coefficient. the safety status of each unit was determined and scored using information acquired by the questionnaires. Lastly, the safety of the entire company was determined.  .Result: Results showed that in safety management: the pressing and store house were in a good range of 66.66 and 60.12 points. Powder painting, enameling, laboratory were in a average range of 56.25, 55.92 and 54.15 points. Assembling and door storage were in a week range of 46.06 points.  .Conclusion: The findings showed that the safety status in the studied appliances company is in average range with 55.45 points. Therefore, it is recommended that the safety indicators should be improved for the betterment of the safety management in the company.

The radiological safety in the petroleum industry. The behavior toward the prevention

International Nuclear Information System (INIS)

Adrian T, W.

2006-01-01

Inside the mark of the regulatory control it takes a preponderant place the control of sealed and open radioactive sources, in oil applications. In this task, the handling of the radioactive sources, the demand of the use of written procedures and the training, they are only some examples, of all those that conform the regulatory control. Among these topics they stand out a series of aspects divided in three big groups: operative radiological safety in the base, in the transport and in the task properly said. Given the great quantity of aspects that should be kept in mind, as well as the integration of all the control processes should be included strongly, aspects of safety and quality culture, and to introduce improvements as for the prevention refers, to correct deviations and remoteness that can be produced, avoiding like this, situations of radiological risk, emphasizing aspects of perception of the risk, training in attitudes, the implementation of audits and verifications of the safety level of the installation and the pursuit and control of the tasks that involve the manipulation of radioactive material, which are described in this work. (Author)

Introduction-Epilepsy Research UK expert workshop 2014: SUDEP: Time for prevention-evidence and clinical translation Proceedings from the Epilepsy Research UK 2014 Expert Workshop.

Science.gov (United States)

Nashef, Lina; Richardson, Mark P

2016-01-01

We offer Epilepsia readers this supplement based on the proceedings of an international workshop on sudden death in epilepsy (SUDEP) held in 2014 at St Anne's College at Oxford and hosted by Epilepsy Research UK (ERUK). This is the second Epilepsia supplement dedicated to SUDEP and its focus is on prevention. As workshop co-chairs, in this introduction we outline why we believe we are on the threshold of a new era of prevention in SUDEP. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

Science.gov (United States)

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Introduction to flood control science

International Nuclear Information System (INIS)

Lee, Dong U; Ha, Jin Uk; Kim, Dong Ha; Shin, Hong Ryeol; Song, Seok Hwan; Kim, Jin Gyu; Moon, Heon Cheol

2003-01-01

This book covers introduction, industrialization disaster such as Bhopal and Chernobyl disaster, earthquake disaster, volcano disaster, avalanche disaster including loss allocation and prevention measures, and natural fire by showing California, Yellowstone park and similarity between fire and flood. It also introduces climate change and disaster, Earth's greenhouse effect and disaster due to current sea level rise, flood damage, drought disaster, famine and drought, prediction of drought, population problems, outlook of world population, and disaster prevention administration system of Korea.

77 FR 40622 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2012-07-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH..., oxygen supply partnership, safety culture, occupational health and safety management systems, preventing...

Introduction to Safety Analysis Approach for Research Reactors

International Nuclear Information System (INIS)

Park, Suki

2016-01-01

The research reactors have a wide variety in terms of thermal powers, coolants, moderators, reflectors, fuels, reactor tanks and pools, flow direction in the core, and the operating pressure and temperature of the cooling system. Around 110 research reactors have a thermal power greater than 1 MW. This paper introduces a general approach to safety analysis for research reactors and deals with the experience of safety analysis on a 10 MW research reactor with an open-pool and open-tank reactor and a downward flow in the reactor core during normal operation. The general approach to safety analysis for research reactors is described and the design features of a typical open-pool and open-tank type reactor are discussed. The representative events expected in research reactors are investigated. The reactor responses and the thermal hydraulic behavior to the events are presented and discussed. From the minimum CHFR and the maximum fuel temperature calculated, it is ensured that the fuel is not damaged in the step insertion of reactivity by 1.8 mk and the failure of all primary pumps for the reactor with a 10 MW thermal power and downward core flow

Does the risk of reprisal prevent nurses blowing the whistle on bad practice?

Science.gov (United States)

Whitehead, Bill; Barker, Denise

Despite the introduction of legislation to protect people who report poor or unsafe practice, whistleblowing can still have serious consequences for nurses. To review the literature on whistleblowing in healthcare, and explore the barriers to reporting poor practice. Studies focusing on whistleblowing in healthcare were used to assess the safety of incident reporting, and to determine what prevented nurses from reporting poor practice. Four major themes were identified as the main barriers to whistleblowing in healthcare: experience of the nurse; confidentiality and reporting processes; incident severity; and personal beliefs. Reprisal for whistleblowing remains a major concern for nurses. Patient safety could be improved by prioritising confidentiality and creating an environment where nurses feel safe to report poor practice.

Idaho Safety Manual.

Science.gov (United States)

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This manual is intended to help teachers, administrators, and local school boards develop and institute effective safety education as a part of all vocational instruction in the public schools of Idaho. This guide is organized in 13 sections that cover the following topics: introduction to safety education, legislation, levels of responsibility,…

Principles of electrical safety

CERN Document Server

Sutherland, Peter E

2015-01-01

Principles of Electrical Safety discusses current issues in electrical safety, which are accompanied by series' of practical applications that can be used by practicing professionals, graduate students, and researchers. .  Provides extensive introductions to important topics in electrical safety Comprehensive overview of inductance, resistance, and capacitance as applied to the human body Serves as a preparatory guide for today's practicing engineers

Patient safety: Safety culture and patient safety ethics

DEFF Research Database (Denmark)

Madsen, Marlene Dyrløv

2006-01-01

,demonstrating significant, consistent and sometimes large differences in terms of safety culture factors across the units participating in the survey. Paper 5 is the results of a study of the relation between safety culture, occupational health andpatient safety using a safety culture questionnaire survey......Patient safety - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure patients from harm have become one of the central concerns in quality improvement in healthcare both nationally andinternationally. This subject raises numerous...... challenging issues of systemic, organisational, cultural and ethical relevance, which this dissertation seeks to address through the application of different disciplinary approaches. The main focus of researchis safety culture; through empirical and theoretical studies to comprehend the phenomenon, address...

A brief introduction of the constructing work of national radiation monitoring system during the twelfth five-year

International Nuclear Information System (INIS)

Liu Hua; Zhao Yongkang; Pan Su; Zhang Jiali; Yang Bin

2013-01-01

Radiation monitoring is the technical groundwork of nuclear and radiation safety regulating. In order to overcome the challenges coming with the development of nuclear energy and technology in china, the program of constructing National Radiation Monitoring System (NRMS) was put forward in the twelfth five-year plan of nuclear safety and prevention of radiation pollution, and the view target in 2020. The implementation plan of the constructing of NRMS has been drew up by the Ministry of Environmental Protection in 2012, which including the construction of organization and human resource system, laws and standards system, quality assurance system, technical research and innovation system, and capability insurance system. A brief introduction of the implementation plan was given in the article, the achievements during the eleventh five-year were reviewed, the challenges and working points were analyzed. (authors)

Engineering safety assessment. An introduction

International Nuclear Information System (INIS)

Thomson, J.R.

1987-01-01

There have been several major industrial accidents in recent years, notably the Chernobyl reactor accident, the Bhopal disaster and the Mexico City gas explosions. It is essential that engineers should understand the natures of the hazards and risks of industrial plant. This book is intended to give an introduction to this subject. Determining the risks associated with hazardous plant such as a chemical plant or a nuclear power station requires knowledge of the probability of a given accident, as well as knowledge of the likely consequences in terms of human lives or damaged property. In this book, the author explains these two main themes in assessing overall risk. He introduces basic probability theory, the assessment of systems reliabilities and structural reliabilities, and the means used to estimate the consequences of hypothetical major accidents. In particular, the methodologies for estimating the consequences of accidental explosion and accidents involving the release of airborne toxic materials (including chemical toxins, carcinogens, and radioactive materials) are explained. A final chapter explores the difficult question of 'acceptable' risk, and how much can justifiably be spent on risk reduction. Intended for use by final year students of chemical, mechanical or nuclear engineering, this book will also be suitable for postgraduate students and practising engineers and scientists whose work involves them in risk assessment. (author)

Machine and Woodworking Tool Safety. Module SH-24. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on machine and woodworking tool safety is one of 50 modules concerned with job safety and health. This module discusses specific practices and precautions concerned with the efficient operation and use of most machine and woodworking tools in use today. Following the introduction, 13 objectives (each keyed to a page in the…

Injury Prevention and Safety

Science.gov (United States)

... 8 49.8 Use of protective equipment for biking, skating, or other sports 69.2 55.4 50.0 Water safety 54.6 42.8 38.0 * In at least 1 elementary school class or in at least 1 required health education course in middle schools or high schools. ...

White paper on nuclear safety in 2009

International Nuclear Information System (INIS)

2009-06-01

It deals with a general introduction of nuclear safety like general safety, safety regulation and system law and standard. It indicates of nuclear energy facility safety about general safety, safety regulation of operating nuclear power plant safety regulation under constructing nuclear power plant. It deals with radiation facility safety, monitoring of environmental radiation, radiation protection, radiation control, international cooperating on nuclear energy safety and establishment of safety regulation.

Occupational risk perception, safety training, and injury prevention: testing a model in the Italian printing industry.

Science.gov (United States)

Leiter, Michael P; Zanaletti, William; Argentero, Piergiorgio

2009-01-01

This study examined occupational risk perception in relation to safety training and injuries. In a printing industry, 350 workers from 6 departments completed a survey. Data analysis showed significant differences in risk perceptions among departments. Differences in risk perception reflected the type of work and the injury incidents in the departments. A structural equation analysis confirmed a model of risk perception on the basis of employees' evaluation of the prevalence and lethalness of hazards as well as the control over hazards they gain from training. The number of injuries sustained was positively related to the perception of risk exposure and negatively related to evaluations about the safety training. The results highlight the importance of training interventions in increasing workers' adoption of safety procedures and prevention of injuries.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Spanish Edition)

International Nuclear Information System (INIS)

2012-01-01

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Russian Edition)

International Nuclear Information System (INIS)

2012-01-01

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Discussing Firearm Ownership and Access as Part of Suicide Risk Assessment and Prevention: "Means Safety" versus "Means Restriction".

Science.gov (United States)

Stanley, Ian H; Hom, Melanie A; Rogers, Megan L; Anestis, Michael D; Joiner, Thomas E

2017-01-01

The goal of this study was to describe the relative utility of the terms "means safety" versus "means restriction" in counseling individuals to limit their access to firearms in the context of a mock suicide risk assessment. Overall, 370 participants were randomized to read a vignette depicting a clinical scenario in which managing firearm ownership and access was discussed either using the term "means safety" or "means restriction." Participants rated the term "means safety" as significantly more acceptable and preferable than "means restriction." Participants randomized to the "means safety" condition reported greater intentions to adhere to clinicians' recommendations to limit access to a firearm for safety purposes (F[1,367] = 7.393, p = .007, [Formula: see text]). The term "means safety" may be more advantageous than "means restriction" when discussing firearm ownership and access in clinical settings and public health-oriented suicide prevention efforts.

Nuclear Safety

International Nuclear Information System (INIS)

1978-09-01

In this short paper it has only been possible to deal in a rather general way with the standards of safety used in the UK nuclear industry. The record of the industry extending over at least twenty years is impressive and, indeed, unique. No other industry has been so painstaking in protection of its workers and in its avoidance of damage to the environment. Headings are: introduction; how a nuclear power station works; radiation and its effects (including reference to ICRP, the UK National Radiological Protection Board, and safety standards); typical radiation doses (natural radiation, therapy, nuclear power programme and other sources); safety of nuclear reactors - design; key questions (matters of concern which arise in the public mind); safety of operators; safety of people in the vicinity of a nuclear power station; safety of the general public; safety bodies. (U.K.)

How to Prevent Tooth Decay in Your Baby

Science.gov (United States)

... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...

Drinks to Prevent Dehydration in a Vomiting Child

Science.gov (United States)

... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...

The Role of OSHA in Safety and Health. Module SH-02. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on the role of OSHA (Occupational Safety and Health Act) in Safety and Health is one of 50 modules concerned with job safety and health. This module looks at the OSHA Act, its aims, and the rights and responsibilities of employers and workers under the Act. Following the introduction, 16 objectives (each keyed to a page in the…

Radiation Safety in Industrial Radiography. Specific Safety Guide

International Nuclear Information System (INIS)

2011-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Benchmarking of World Health Organization surgical safety checklist

International Nuclear Information System (INIS)

Messahel, Farouk M.; AlQahtani, Ali S.

2009-01-01

To compare the quality of our services with the World Health Organization (WHO) surgical safety recommendations as a reference, to improve our services if they fall short of that of the WHO, and to publish our additional standards, so that they may be included in future revision of WHO checklist. We conducted this study on 15th July 2008 at the Armed Forces Hospital, Wadi Al-Dawasir, Kingdom of Saudi Arabia. We compared each WHO safety standard item with its corresponding standard in our checklist. There were 4 possibilities for the comparison: that our performance meet, was less than or exceeded the quality-of-care measures in the WHO checklist, or that there are additional safety measures in either checklist that need to be considered by each party. Since its introduction in 1997, our checklist was applied to 11828 patients and resulted in error-free outcomes. Benchmarking proved that our surgical safety performance does not only match the standards of the WHO surgical safety checklist, but also exceeds it in other safety areas (for example measures to prevent perioperative hypothermia and venous thromboembolism). Benchmarking is a continuous quality improvement process aimed at providing the best available at the time in healthcare, and we recommend its adoption by healthcare providers. The WHO surgical safety checklist is a bold step in the right direction towards safer surgical outcomes. Feedback from other medical establishments should be encouraged. (author)

Safety and health in forest harvesting operations. Diagnosis and preventive actions. A review.

OpenAIRE

P. Albizu-Urionabarrenetxea; E. Tolosana-Esteban; E. Roman-Jordan

2013-01-01

Aim of study: to review the present state of the art in relation to the main labour risks and the most relevant results of recent studies evaluating the safety and health conditions of the forest harvesting work and better ways to reduce accidents.Area of study: It focuses mainly on developed Countries, where the general concern about work risks prevention, together with the complex idiosyncrasy of forest work in forest harvesting operations, has led to a growing interest from the forest scie...

Prevention of hepatitis B

Directory of Open Access Journals (Sweden)

Marta Estera Kowalska

2017-07-01

Full Text Available Hepatitis B (Hepatitis B is a hepatitis B virus (HBV -based liver disease. This virus has an affinity for liver cells, it can cause both acute and chronic viral infections of varying severity. The consequences of chronic HBV infection can be cirrhosis and liver cancer. In Poland in 1989 a preventive program was implemented to reduce HBV infection. Universal vaccinations have been introduced to reduce the prevalence of Type B hepatitis B from 40.3 / 100,000 in 1989 to 7/100 in 2000. In the last 20 years in Poland there has been huge progress in the prevention and suppression of HBV infections. Decrease in the incidence of hepatitis B is mainly the result of the introduction of compulsory vaccination and improving hygiene procedures and improve sanitation aimed at aborting the pathways of the virus. However, still a large part of society is not immune on HBV infection acting potential group of the risk of infection. In addition, in the era of a growing group of followers. movements of the anti vaccine it is necessary to continue to promote knowledge of HBV and the efficacy and safety of vaccination.

Market introduction of innovative reactors

International Nuclear Information System (INIS)

Heek, A.I.V.

1996-01-01

Besides the development of evolutionary and passive LWR, also that of innovative reactors is attractive, because other applications (new markets) besides base load electricity generation can be thought of, and interesting new features on the area of safety or waste incineration can be shown. For market introduction however, a (partial) new infrastructure and a demonstration plant are required. Taking the abundance of fossil fuels and the accompanying low fuel prices today and in the near future into account, the funds to finance this will only become available when 1)the projected energy generating costs will be substantially lower than those of today, and 2)the costs of market introduction (i.e. the demonstration plant and the required infrastructure) will be limited. Generally speaking, there are two ways to seek competitiveness of a reactor type: 1)application of economy of scale, and 2)simplification. In this paper, an example of the second possibility is pursued for an innovative reactor type. The HR1 is a 40 MWth high temperature gas cooled reactor for heat and power cogeneration, a simplified version of the German HTR Module. The power level is chosen so small that additional safety features become apparent. For example, after a total loss of coolant the fuel remains fully intact, even if the reactor shutdown system fails and the reactor goes critical again after a number of hours. These safety features are used to omit certain components, like the emergency core cooling system, or to select a cheaper version of components, e.g. replacing the containment building by a confinement. Moreover, degradation of the safety class of certain components comes within the realm of possibilities. The cost reduction offered by these two measures are used to more than offset the economy-of-scale disadvantage of this small reactor system. (author)

What is the place of pre-exposure prophylaxis in HIV prevention?

Science.gov (United States)

De Man, Jeroen; Colebunders, Robert; Florence, Eric; Laga, Marie; Kenyon, Christopher

2013-01-01

New tools are needed to bring down ongoing high HIV incidence. This review aims to evaluate the place of one of these new tools (pre-exposure prophylaxis) in a comprehensive prevention strategy. Several trials have demonstrated the safety and the efficacy of pre-exposure prophylaxis in HIV prevention. Two large trials have, however, failed to show such efficacy. This was likely due to poor adherence in these trials. New forms of long-acting pre-exposure prophylaxis currently in trials may deal with these problems of low adherence. Pre-exposure prophylaxis has been demonstrated to be cost-effective within certain settings. The introduction of pre-exposure prophylaxis into prevention programs needs to be carefully thought through. For example, pre-exposure prophylaxis-induced risk compensation, at both an individual and population level, could undermine other aspects of a comprehensive HIV prevention program. In conclusion, pre-exposure prophylaxis could be a useful additional tool for the prevention of HIV in specific high-risk groups. It should be implemented in a way that deals with issues such as ensuring high adherence and ensuring that pre-exposure prophylaxis does not detract from, but complements, other more fundamental elements of HIV prevention programs.

Fall risk and prevention agreement: engaging patients and families with a partnership for patient safety.

Science.gov (United States)

Vonnes, Cassandra; Wolf, Darcy

2017-01-01

Falls are multifactorial in medical oncology units and are potentiated by an older adult's response to anxiolytics, opiates and chemotherapy protocols. In addition, the oncology patient is at an increased risk for injury from a fall due to coagulopathy, thrombocytopenia and advanced age. At our National Cancer Institute-designated inpatient cancer treatment centre located in the southeastern USA, 40% of the total discharges are over the age of 65. As part of a comprehensive fall prevention programme, bimonthly individual fall reports have been presented with the Chief Nursing Officer (CNO), nursing directors, nurse managers, physical therapists and front-line providers in attendance. As a result of these case discussions, in some cases, safety recommendations have not been followed by patients and families and identified as an implication in individual falls. Impulsive behaviour was acknowledged only after a fall occurred. A medical oncology unit was targeted for this initiative due to a prolonged length of stay. This patient population receives chemotherapeutic interventions, management of oncological treatment consequences and cancer progression care. The aim of this project was to explore if initiation of a Fall Prevention Agreement between the nursing team and older adults being admitted to medical oncology units would reduce the incidence of falls and the incidence of falls with injury. In order to promote patient and family participation in the fall reduction and safety plan, the Fall Risk and Prevention Agreement was introduced upon admission. Using the Morse Fall Scoring system, patient's risk for fall was communicated on the Fall Risk and Prevention Agreement. Besides admission, patients were reassessed based on change of status, transfer or after a fall occurs. Fall and fall injuries rates were compared two-quarters prior to implementation of the fall agreement and eight-quarters post implementation. Falls and fall injuries on the medical oncology unit

FOOD QUALITY MANAGEMENT AND SAFETY

OpenAIRE

Rizwana Khatoon; Debkumar Chakraborty; R.C. Chandni; Amar Sankar; A.V. Raghu

2017-01-01

Food safety system mainly focuses on identifying and preventing hazards that may lead product to deteriorate. The main important of manufacturing practice is a system that ensures that products meet food safety, quality and legal requirements. The hazard analysis and critical control point system, applies to food safety management, uses the approach of controlling critical points in food handling to prevent food safety problems. Besides enhancing food safety, other benefits of applying HACCP ...

Food safety

Science.gov (United States)

... safety URL of this page: //medlineplus.gov/ency/article/002434.htm Food safety To use the sharing features on this page, please enable JavaScript. Food safety refers to the conditions and practices that preserve the quality of food. These practices prevent contamination and foodborne ...

Safety Features of Material and Personnel Movement Devices. Module SH-25. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety features of material and personnel movement devices is one of 50 modules concerned with job safety and health. This module covers safe conditions and operating practices for conveyors, elevators, escalators, moving walks, manlifts, forklifts, and motorized hand trucks. Following the introduction, 10 objectives (each…

Improving compliance with hormonal replacement therapy in primary osteoporosis prevention

DEFF Research Database (Denmark)

Vestergaard, P; Hermann, A P; Gram, J

1997-01-01

To evaluate whether introduction of treatment alternatives would improve compliance with hormonal replacement therapy (HRT) as primary osteoporosis prevention in women not tolerating the first line osteoporosis prevention schedule.......To evaluate whether introduction of treatment alternatives would improve compliance with hormonal replacement therapy (HRT) as primary osteoporosis prevention in women not tolerating the first line osteoporosis prevention schedule....

Early introduction of allergenic foods for the prevention of food allergy from an Asian perspective-An Asia Pacific Association of Pediatric Allergy, Respirology & Immunology (APAPARI) consensus statement.

Science.gov (United States)

Tham, Elizabeth Huiwen; Shek, Lynette Pei-Chi; Van Bever, Hugo Ps; Vichyanond, Pakit; Ebisawa, Motohiro; Wong, Gary Wk; Lee, Bee Wah

2018-02-01

Emerging evidence for the early introduction of allergenic foods for the prevention of food allergies, such as peanut allergy in Western populations, has led to the recent publication of guidelines in the USA and Europe recommending early peanut introduction for high-risk infants with severe eczema or egg allergy. Peanut allergy is, however, much less prevalent in Asia compared to the West. Varying patterns of food allergy are seen even within Asian countries-such as a predominance of wheat allergy in Japan and Thailand and shellfish allergy in Singapore and the Philippines. Customs and traditions, such as diet and infant feeding practices, also differ between Asian populations. Hence, there are unique challenges in adapting guidelines on early allergenic food introduction to the Asian setting. In this paper, we review the evidence and discuss the possible approaches to guide the timely introduction of allergenic food in high-risk infants in Asia. © 2017 EAACI and John Wiley and Sons A/S. Published by John Wiley and Sons Ltd.

Deterministic Safety Analysis for Nuclear Power Plants. Specific Safety Guide (Russian Edition)

International Nuclear Information System (INIS)

2014-01-01

The objective of this Safety Guide is to provide harmonized guidance to designers, operators, regulators and providers of technical support on deterministic safety analysis for nuclear power plants. It provides information on the utilization of the results of such analysis for safety and reliability improvements. The Safety Guide addresses conservative, best estimate and uncertainty evaluation approaches to deterministic safety analysis and is applicable to current and future designs. Contents: 1. Introduction; 2. Grouping of initiating events and associated transients relating to plant states; 3. Deterministic safety analysis and acceptance criteria; 4. Conservative deterministic safety analysis; 5. Best estimate plus uncertainty analysis; 6. Verification and validation of computer codes; 7. Relation of deterministic safety analysis to engineering aspects of safety and probabilistic safety analysis; 8. Application of deterministic safety analysis; 9. Source term evaluation for operational states and accident conditions; References

Industrial safety, origins and current situation

International Nuclear Information System (INIS)

Gil Sarralbo, J. F.

2011-01-01

Basic Introduction to Industrial Safety, purpose and expected outcome. Concepts and fundamental principles that support it. Brief overview of its evolution over the course of history. The current legal basis in Spain for Industrial Safety. (Author) 4 refs.

Responsibility for managing and legal consequences in the field of industrial safety

International Nuclear Information System (INIS)

Buedenbender, U.

1987-01-01

The object of industrial safety is to protect the aspirations, the life and the health of the employee from injury and by accident prevention in the field to combat dangers to life and health. The necessity for industrial safety is just as uncontentious as the objectives pursued by it. There is also a humanitarian connotation here since the health and welfare of employees are of central importance. In addition, economic aspects have to be taken into consideration, for industrial accidents mean unnecessary industrial costs which can have not insignificant economic consequences. Boards of directors, heads of various departments in the hierarchy, also the members of those departments must be absolutely clear as to what are the requirements for industrial safety in detail, what consequences arise for the introduction and organization of industrial processes right through the organization of the enterprise itself and how in this respect responsibilities are to be allocated to those affected. (orig.) [de

Quantitative approach for the risk assessment of African swine fever and Classical swine fever introduction into the United States through legal imports of pigs and swine products.

Directory of Open Access Journals (Sweden)

Diana María Herrera-Ibatá

Full Text Available The US livestock safety strongly depends on its capacity to prevent the introduction of Transboundary Animal Diseases (TADs. Therefore, accurate and updated information on the location and origin of those potential TADs risks is essential, so preventive measures as market restrictions can be put on place. The objective of the present study was to evaluate the current risk of African swine fever (ASF and Classical swine fever (CSF introduction into the US through the legal importations of live pigs and swine products using a quantitative approach that could be later applied to other risks. Four quantitative stochastic risk assessment models were developed to estimate the monthly probabilities of ASF and CSF release into the US, and the exposure of susceptible populations (domestic and feral swine to these introductions at state level. The results suggest a low annual probability of either ASF or CSF introduction into the US, by any of the analyzed pathways (5.5*10-3. Being the probability of introduction through legal imports of live pigs (1.8*10-3 for ASF, and 2.5*10-3 for CSF higher than the risk of legally imported swine products (8.90*10-4 for ASF, and 1.56*10-3 for CSF. This could be caused due to the low probability of exposure associated with this type of commodity (products. The risk of feral pigs accessing to swine products discarded in landfills was slightly higher than the potential exposure of domestic pigs through swill feeding. The identification of the months at highest risk, the origin of the higher risk imports, and the location of the US states most vulnerable to those introductions (Iowa, Minnesota and Wisconsin for live swine and California, Florida and Texas for swine products, is valuable information that would help to design prevention, risk-mitigation and early-detection strategies that would help to minimize the catastrophic consequences of potential ASF/CSF introductions into the US.

Patient Safety and Healthcare Quality

OpenAIRE

Aikaterini Toska; Panagiotis Kyloudis; Maria Rekleiti; Maria Saridi

2012-01-01

Introduction: Due to a variety of circumstances and world-wide research findings, patient safety andquality care during hospitalization have emerged as major issues. Patient safety deficits may burdenhealth systems as well as allocated resources. The international community has examined severalproposals covering general and systemic aspects in order to improve patient safety; several long-termprograms and strategies have also been implemented promoting the participation of health-relatedagent...

[Development and effect analysis of web-based instruction program to prevent elementary school students from safety accidents].

Science.gov (United States)

Chung, Eun-Soon; Jeong, Ihn-Sook; Song, Mi-Gyoung

2004-06-01

This study was aimed to develop a WBI(Web Based Instruction) program on safety for 3rd grade elementary school students and to test the effects of it. The WBI program was developed using Macromedia flash MX, Adobe Illustrator 10.0 and Adobe Photoshop 7.0. The web site was http://www.safeschool.co.kr. The effect of it was tested from Mar 24, to Apr 30, 2003. The subjects were 144 students enrolled in the 3rd grade of an elementary school in Gyungju. The experimental group received the WBI program lessons while each control group received textbook-based lessons with visual presenters and maps, 3 times. Data was analyzed with descriptive statistics, and chi2 test, t-test, and repeated measure ANOVA. First, the WBI group reported a longer effect on knowledge and practice of accident prevention than the textbook-based lessons, indicating that the WBI is more effective. Second, the WBI group was better motivated to learn the accident prevention lessons, showing that the WBI is effective. As a result, the WBI group had total longer effects on knowledge, practice and motivation of accident prevention than the textbook-based instruction. We recommend that this WBI program be used in each class to provide more effective safety instruction in elementary schools.

Health economics of blood transfusion safety

NARCIS (Netherlands)

Hulst, Marinus van

2008-01-01

The HIV/AIDS disaster in transfusion medicine shaped the future agendas for blood transfusion safety. More than ever before, the implementation of interventions which could improve blood transfusion safety was driven merely by availability of technology. The introduction of new expensive

Prevention of farm injuries in Denmark

DEFF Research Database (Denmark)

Rasmussen, Kurt; Carstensen, Ole; Lauritsen, Jens

2003-01-01

This study examined the effects of a 4-year randomized intervention program that combined a safety audit with safety behavior training in the prevention of farm injuries.......This study examined the effects of a 4-year randomized intervention program that combined a safety audit with safety behavior training in the prevention of farm injuries....

Safety for Compressed Gas and Air Equipment. Module SH-26. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety for compressed gas and air equipment is one of 50 modules concerned with job safety and health. This module presents technical data about commonly used gases and stresses the procedures necessary for safe handling of compressed gases. Following the introduction, 14 objectives (each keyed to a page in the text) the…

Safety in Elevators and Grain Handling Facilities. Module SH-27. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on safety in elevators and grain handling facilities is one of 50 modules concerned with job safety and health. Following the introduction, 15 objectives (each keyed to a page in the text) the student is expected to accomplish are listed (e.g., Explain how explosion suppression works). Then each objective is taught in detail,…

Safety of nuclear fuel cycle facilities. Safety requirements

International Nuclear Information System (INIS)

2008-01-01

This publication covers the broad scope of requirements for fuel cycle facilities that, in light of the experience and present state of technology, must be satisfied to ensure safety for the lifetime of the facility. Topics of specific reference include aspects of nuclear fuel generation, storage, reprocessing and disposal. Contents: 1. Introduction; 2. The safety objective, concepts and safety principles; 3. Legal framework and regulatory supervision; 4. The management system and verification of safety; 5. Siting of the facility; 6. Design of the facility; 7. Construction of the facility; 8. Commissioning of the facility; 9. Operation of the facility; 10. Decommissioning of the facility; Appendix I: Requirements specific to uranium fuel fabrication facilities; Appendix II: Requirements specific to mixed oxide fuel fabrication facilities; Appendix III: Requirements specific to conversion facilities and enrichment facilities

Improving mine safety technology and training: establishing US global leadership

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-15

In 2006, the USA's record of mine safety was interrupted by fatalities that rocked the industry and caused the National Mining Association and its members to recommit to returning the US underground coal mining industry to a global mine safety leadership role. This report details a comprehensive approach to increase the odds of survival for miners in emergency situations and to create a culture of prevention of accidents. Among its 75 recommendations are a need to improve communications, mine rescue training, and escape and protection of miners. Section headings of the report are: Introduction; Review of mine emergency situations in the past 25 years: identifying and addressing the issues and complexities; Risk-based design and management; Communications technology; Escape and protection strategies; Emergency response and mine rescue procedures; Training for preparedness; Summary of recommendations; and Conclusions. 37 refs., 3 figs., 5 apps.

New innovative educational method to prevent accidents involving young road users (aged 15-24 – European Road Safety Tunes

Directory of Open Access Journals (Sweden)

Jankowska-Karpa Dagmara

2017-01-01

Full Text Available The article presents a new teaching method designed to improve road safety among young road users. Developed under “European Road Safety Tunes”, this international project was cofunded by EU DG MOVE. Its main aim is to improve road safety and minimize the number of road accidents, injuries and fatalities among road users who are 15-24 years old. The Safety Tunes method contains a series of workshops addressed to young vocational school students: cyclists, moped and motor riders and car drivers. The workshops incorporate peer and emotive education, and delivery of road safety related messages through different types of artistic forms. The topics tackled during class address awareness of possible risks and risk-behaviour, prevention of distraction and reduction in young fatalities and serious injuries on the road. All actions within the project are evaluated, both in terms of the impact of the workshops on students’ attitudes towards road safety problems and in terms of process assessment.

Safety Behaviors and Stuttering

Science.gov (United States)

Lowe, Robyn; Helgadottir, Fjola; Menzies, Ross; Heard, Rob; O'Brian, Sue; Packman, Ann; Onslow, Mark

2017-01-01

Purpose: Those who are socially anxious may use safety behaviors during feared social interactions to prevent negative outcomes. Safety behaviors are associated with anxiety maintenance and poorer treatment outcomes because they prevent fear extinction. Social anxiety disorder is often comorbid with stuttering. Speech pathologists reported in a…

Efficacy and safety of the probiotic Saccharomyces boulardii for the prevention and therapy of gastrointestinal disorders

Science.gov (United States)

Kelesidis, Theodoros

2012-01-01

Several clinical trials and experimental studies strongly suggest a place for Saccharomyces boulardii as a biotherapeutic agent for the prevention and treatment of several gastrointestinal diseases. S. boulardii mediates responses resembling the protective effects of the normal healthy gut flora. The multiple mechanisms of action of S. boulardii and its properties may explain its efficacy and beneficial effects in acute and chronic gastrointestinal diseases that have been confirmed by clinical trials. Caution should be taken in patients with risk factors for adverse events. This review discusses the evidence for efficacy and safety of S. boulardii as a probiotic for the prevention and therapy of gastrointestinal disorders in humans. PMID:22423260

Nuclear safety legislation and supervision in China

International Nuclear Information System (INIS)

Zhang Shiguan

1991-02-01

The cause for the urgent need of nuclear safety legislation and supervision in China is firstly described, and then a brief introduction to the basic principle and guideline of nuclear safety is presented. Finally the elaboration on the establishment of nuclear safety regulatory system, the enactment of a series of regulations and safety guides, and the implementation of licencing, nuclear safety supervision and research for ensuring the safety of nuclear energy, since the founding of the National Nuclear Safety Administration, are introduced

Comparing non-safety with safety device sharps injury incidence data from two different occupational surveillance systems.

Science.gov (United States)

Mitchell, A H; Parker, G B; Kanamori, H; Rutala, W A; Weber, D J

2017-06-01

The United States Occupational Safety and Health Administration (OSHA) Bloodborne Pathogens Standard as amended by the Needlestick Safety and Prevention Act requiring the use of safety-engineered medical devices to prevent needlesticks and sharps injuries has been in place since 2001. Injury changes over time include differences between those from non-safety compared with safety-engineered medical devices. This research compares two US occupational incident surveillance systems to determine whether these data can be generalized to other facilities and other countries either with legislation in place or considering developing national policies for the prevention of sharps injuries among healthcare personnel. Copyright © 2017 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition)

International Nuclear Information System (INIS)

2013-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition)

International Nuclear Information System (INIS)

2013-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in … shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

Radiation Safety in Industrial Radiography. Specific Safety Guide (Arabic Edition)

International Nuclear Information System (INIS)

2012-01-01

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

The Safety Case and Safety Assessment for the Disposal of Radioactive Waste

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-15

This Safety Guide provides guidance and recommendations on meeting the safety requirements in respect of the safety case and supporting safety assessment for the disposal of radioactive waste. The safety case and supporting safety assessment provide the basis for demonstration of safety and for licensing of radioactive waste disposal facilities and assist and guide decisions on siting, design and operations. The safety case is also the main basis on which dialogue with interested parties is conducted and on which confidence in the safety of the disposal facility is developed. This Safety Guide is relevant for operating organizations preparing the safety case as well as for the regulatory body responsible for developing the regulations and regulatory guidance that determine the basis and scope of the safety case. Contents: 1. Introduction; 2. Demonstrating the safety of radioactive waste disposal; 3. Safety principles and safety requirements; 4. The safety case for disposal of radioactive waste; 5. Radiological impact assessment for the period after closure; 6. Specific issues; 7. Documentation and use of the safety case; 8. Regulatory review process.

Prevention: Exercise

Medline Plus

Full Text Available ... Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen Your Core! Stretching/Flexibility Aerobic ... Strength Training for the Elderly Other Back Pack Safety Pregnancy and Back Pain Preventing Osteoporosis Back Pain ...

A test of safety, violence prevention, and civility climate domain-specific relationships with relevant workplace hazards.

Science.gov (United States)

Gazica, Michele W; Spector, Paul E

2016-01-01

Safety climate, violence prevention climate, and civility climate were independently developed and linked to domain-specific workplace hazards, although all three were designed to promote the physical and psychological safety of workers. To test domain specificity between conceptually related workplace climates and relevant workplace hazards. Data were collected from 368 persons employed in various industries and descriptive statistics were calculated for all study variables. Correlational and relative weights analyses were used to test for domain specificity. The three climate domains were similarly predictive of most workplace hazards, regardless of domain specificity. This study suggests that the three climate domains share a common higher order construct that may predict relevant workplace hazards better than any of the scales alone.

Preventing the Spread of Illness in Child Care or School

Science.gov (United States)

... Healthy Living Healthy Living Healthy Living Nutrition Fitness Sports Oral Health Emotional Wellness Growing Healthy Sleep Safety & Prevention Safety & Prevention Safety and Prevention Immunizations ...

The effects of the non-contingent presentation of safety signals on the elimination of safety behaviors: An experimental comparison between individuals with low and high obsessive-compulsive profiles.

Science.gov (United States)

Angelakis, Ioannis; Austin, Jennifer L

2018-06-01

Safety behaviors, defined as engagement in avoidance within safe environments, are a key symptom of obsessive-compulsive and related disorders. They may interfere with daily functioning and as such their emission should be reduced. The purpose of the current study is to investigate the effects of the non-contingent presentation of safety signals (cues produced by safety behaviors) on reducing safety behaviors in participants self-reporting low and high OCD profiles. In total, 32 participants were asked to play a game to gain points and avoid their loss. After having developed avoidance behavior, evidenced by maintaining all of their earned points, they were exposed to safe environments where no point loss was programmed. In Test 1, safety cues (blue bar) were produced contingent on performing safety behaviors. In Test 2, safety cues were presented continuously without any response requirement. Findings demonstrated that high OCD group displayed higher rates of safety behaviors than low OCD group. However, exposure to the non-contingent presentation of safety signals eliminated their emission in both groups. Future studies need to evaluate the effects of different non-contingent schedules on the suppression of safety behaviors. These findings contribute to the literature by demonstrating that non-contingent introduction of safety signals eliminated safety behaviors completely, even in high OCD participants, who performed safety behavior at higher rates. Such a treatment protocol may ameliorate exposure therapy in which response prevention constitutes a key element and is generally associated with increased drop-out rates. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design and implementation of an identification system in construction site safety for proactive accident prevention.

Science.gov (United States)

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

Radiation safety supervisory system in Latvia and its role in prevention of unauthorised practices with radiation sources

International Nuclear Information System (INIS)

Eglajs, A.; Salmins, A.

2001-01-01

This report provides an overview of the practical and legal aspects of the use of radiation sources. The existing regulatory infrastructure is briefly analysed and proposed systems are described. The proposed interactions between the regulatory body and the advisory board are presented and some details about joint activities of different institutions concerning radiation safety are given. An implementation example of the supervisory system in combating illicit trafficking is analysed and the essential components in the prevention of illicit trafficking are assessed. Some findings of investigations are quoted regarding improvements in protection and prevention on the national and the international level. (author)

Revise of the law concerning prevention from radiation hazards due to radioisotopes, etc

International Nuclear Information System (INIS)

Sakamoto, Yoshiaki; Sendo, Muneaki

2004-01-01

The Law Concerning Prevention from Radiation Hazards due to Radioisotopes, etc. was revised in 2004. The regulation about disposal of RI waste was fixed at this revise of the law. Regulation of an application about the disposal of the RI waste was added to former radioactive waste control business. And regulation of confirmation of waste disposal by a regulation body was added. By this law revision, a necessary system for the RI waste disposal is ready. Furthermore, the Basic Safety Standard (BSS) and the following rationalization of related to regulation were introduced into the Law Concerning Prevention from Radiation Hazards due to Radioisotopes, etc. by this law revision. The regulation for a handling of radionuclides will be changed a lot due to the introduction of the BSS. (author)

The effectiveness of maritime safety policy instruments from the Finnish maritime experts’ point of view – case Gulf of Finland and prevention of an oil accident

Directory of Open Access Journals (Sweden)

Jouni Lappalainen

2013-09-01

Full Text Available Sea accidents are aimed to be prevented with an extensive amount of maritime safety regulation. The purpose of this paper is to present the findings of a questionnaire study that was targeted at Finnish maritime experts and addressed the question: how to prevent an oil accident in the Gulf of Finland. This study also includes a literature study about the problems of the current maritime safety regime. The findings of the questionnaire study are compared to the findings of the literature study. The questionnaire study showed that many kinds of policies have improved maritime safety, and they are needed to ensure maritime safety. For instance, ship construction, fairway maintenance, nautical charts and rules of the road at sea can be considered the cornerstones of maritime safety. However, the results ranked voluntary activities of companies as the most effective way to improve maritime safety in the future. Self-regulative approaches could solve some problems connected to more traditional policy-making.

Public safety investigations-A new evolutionary step in safety enhancement?

International Nuclear Information System (INIS)

Stoop, John; Roed-Larsen, Sverre

2009-01-01

A historical overview highlights the evolutionary nature of developments in accident investigations in the transport industry. Based on a series of major events outside transportation, the concept of accident investigations has broadened to other domains and to a widening of the scope of the investigation. Consequently, existing investigation boards are forced to adapt their mandates, missions and methods. With the introduction of social risk perception and application of the concept of safety investigation in the public sector, a change of focus towards the aftermath and non-technical issues of a more generic nature emerges. This expansion has also gained the interest of social sciences and public governance, generating new underlying models and theories on risk and responsibility. The evolutionary development of safety investigations is demonstrated by the various organisational forms which shaped accident investigations in different countries. Underneath these organisational differences, a need for a common methodology and a reflection on fundamental notions is discussed. In particular differences among human operator models, the allocation of responsibilities in design concepts and methodological issue are elaborated. The needs and opportunities for a transition from accident prevention towards systems change are indicated. At present, the situation is ambiguous. An encompassing inventory can only provide a general oversight over emerging trends and lacks analytic rigor on specific topics. The societal dimensions, institutional changes at the level of governance and control and the powers that advocate or challenge investigations are not yet fully described. Therefore, in the conclusions a small number of critical challenges and threats are identified that should be open to scrutiny in order to facilitate a new, evolutionary step in safety enhancement.

Policy for introduction of risk-informed regulation for nuclear facilities in Japan

International Nuclear Information System (INIS)

Akihide Hidaka; Shoichiro Sakaguchi; Toshihiro Bannai; Kunihiro Matsui

2005-01-01

The nuclear safety regulations in Japan place a basis on the deterministic approach with the defence-in-depth philosophy and engineering judgments. However, as the development of PSA (Probabilistic Safety Assessment) technologies in recent years, the Nuclear Safety Commission (NSC) began to consider that the utilization of risk information in addition to the traditional deterministic approach could be very effective for the safety regulations to improve rationality, consistency, transparency and efficiency by appropriate allocation of limited resources for the regulatory activities. In order to show the basic strategy, the NSC published the policy for introduction of Risk-Informed Regulation (RIR) in November 2003. The safety goals that play an important role in RIR were tentatively established in December 2003 while the performance goals are under development as of May, 2005. It is expected that RIR be gradually introduced from the applicable area. The NSC is now examining what the RIR system in Japan should be by making each role and incentive of the competent organizations clear. In the future, when the experiences on application of the safety goals are accumulated, RIR will be consistently applied from design to operational area. This paper describes the recent activities of the NSC for introduction of RIR in Japan and development of the safety goals including the performance goals. (authors)

Strategy for Coordinated EPA/Occupational Safety and Health Administration (OSHA) Implementation of the Chemical Accident Prevention Requirements of the Clean Air Act Amendments of 1990

Science.gov (United States)

EPA and the Occupational Safety and Health Administration (OSHA) share responsibility for prevention: OSHA has the Process Safety Management Standard to protect workers, and EPA the Risk Management Program to protect the general public and environment.

Safety evaluation of the Dalat research reactor operation

International Nuclear Information System (INIS)

Long, V.H.; Lam, P.V.; An, T.K.

1989-01-01

After an introduction presenting the essential characteristics of the Dalat Nuclear Research Reactor, the document presents i) The safety assurance condition of the reactor, ii) Its safety behaviour after 5 years of operation, iii) Safety research being realized on the reactor. Following is questionnaire of safety evaluation and a list of attachments, which concern the reactor

Effects of an injury and illness prevention program on occupational safety behaviors among rice farmers in Nakhon Nayok Province, Thailand

Directory of Open Access Journals (Sweden)

Santaweesuk S

2014-03-01

Full Text Available Sapsatree Santaweesuk,1,2 Robert S Chapman,1 Wattasit Siriwong1,3 1College of Public Health Sciences, Chulalongkorn University, Bangkok, Thailand; 2Srinakarinwirot University Ongkharak Campus, Nakhon Nayok, Thailand; 3Thai Fogarty ITREOH Center, Chulalongkorn University, Bangkok, Thailand Abstract: The objective of this study was to determine the effects of an Injury and Illness Prevention (IIP program intervention on occupational safety behavior among rice farmers in Nakhon Nayok province, Thailand. This was a quasi-experimental study in an intervention group and a control group. It was carried out in two rice farming communities, in which most people are rice farmers with similar socio-demographic characteristics. Multistage sampling was employed, selecting one person per rice farming household. The intervention group was 62 randomly selected rice farmers living in a rural area; another 55 rice farmers served as the control group. A structured face-to-face interview questionnaire was administered to participants to evaluate their safety behaviors in four areas: equipment use, pesticide use, ergonomics, and working conditions. The 2-week intervention program consisted of four elements: 1 health education, 2 safety inspection, 3 safety communication, and 4 health surveillance. Data were collected at baseline and 4 months after the intervention (follow-up. We used a general linear model repeated-measures analysis of variance to assess the mean difference between baseline and follow-up occupational safety behavior points between the intervention and control groups. Pesticide safety behaviors significantly increased in the intervention group compared with the control group. Ergonomics and working conditions points also increased in the intervention group, but not significantly so. The equipment use score decreased in the intervention group. It is necessary to identify and develop further measures to improve occupational safety behaviors. Some

Salmonella Prevention

Science.gov (United States)

... and in vegetable and fruit harvesting and packing operations may help prevent salmonellosis caused by contaminated foods. Better education of food industry workers in basic food safety and restaurant inspection procedures may prevent cross-contamination and other ...

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

Science.gov (United States)

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

Primary Prevention of Food Allergy.

Science.gov (United States)

Greenhawt, Matthew J; Fleischer, David M

2017-04-01

Food allergy is estimated to affect approximately 8% of children in the USA. This is a disease without any known treatment or cure and, for some, a disease that can be quite severe, even life-threatening. While recent advances in potential treatment have made remarkable strides, with two food-targeted immunotherapy products now in phase III trials, perhaps the biggest gains in the field have come in the advent of potential preventative strategies to avoid the development of food allergy in high-risk individuals. There have been multiple, randomized, controlled trials (RCTs) performed in the past 5 years that have demonstrated significant risk reduction from early allergen introduction. These include two trials for early peanut introduction and five trials for early egg introduction in the first year of life. The results indicate that primary prevention of food allergy through early allergen introduction may represent a strategy that could potentially avert tens of thousands of children from becoming food allergic. In support of the data for peanut, the National Institute of Allergy and Infectious Diseases recently sponsored an addendum to the 2010 food allergy guidelines, specifically recommending peanut be introduced in both high- and standard-risk infants to reduce the risk of developing peanut allergy. To date, no formal recommendations have been made for egg, however. This review will focus on the latest evidence supporting early introduction as a strategy to prevent food allergy, as well as on practical aspects for its successful implementation.

Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

Towards an International Approach to Nuclear Safety

International Nuclear Information System (INIS)

Tomihiro Taniguchi

2006-01-01

This document presents in a series of transparencies the different activities of the IAEA: Introduction of International Atomic Energy Agency, Changing world, Changing Technology, Changing Global Security, Developing Innovative Nuclear Energy Systems, Global Nuclear Safety Regime, IAEA Safety Standards: Hierarchy - Global Reference for Striving for Excellence, IAEA Safety Reviews and Services: Integrated Safety Approach, Global Knowledge Network - Asian Nuclear Safety Network, Safety Issues and Challenges, Synergy between Safety and Security, Recent Developments: Safety and Security of Radioactive Sources, Convention on Physical Protection of Nuclear Material (CPPNM), Incident and Emergency Preparedness and Response, Holistic Approach for Safety and Security, Sustainable Development. (J.S.)

Safety design/analysis and scenario for prevention of CDA with ECCS in lead-bismuth-cooled fast reactor

International Nuclear Information System (INIS)

Minoru, Takahashi; Vaclav, Dostal; Abu Khalid, Rivai; Novitrian; Yumi, Yamada

2007-01-01

Safety design has been developed to show safety feature of Pb-Bi-cooled direct contact boiling water small fast reactor (PBWFR). The core is designed to have negative void reactivity even if the entire core and upper plenum are voided by steam intrusion from above. In-vessel type control rod driving mechanisms are used to prevent control rods from accidental ejection due to high pressure in the reactor vessel. In cases of coolant leakage from reactor vessel and feed water pipes, Pb-Bi coolant level in the reactor vessel is kept at the required level for decay heat removal by means of closed type guard vessel. Dual pipes are adopted to avoid leak of water in the feedwater system. Pump trip in feedwater systems initiates loss of coolant flow (LOF) event, although there is no concern of loss of flow accident due to primary pump trip. Injection of high pressure water slows down the flow-coast-down of feedwater at the LOF event. It has been evaluated that the fuel temperature is kept lower than safety limits at the unprotected loss of flow and heat sink (ATWS). A scenario for prevention of the core disruptive accident (CDA) with the emergency core cooling system (ECCS) is examined. The reactor becomes super-critical when the reactor vessel is filled with water. It is necessary to use water with boric acid for the ECC system, and additional backup rods for sub-critical core in water injection. (authors)

40 CFR 68.65 - Process safety information.

Science.gov (United States)

2010-07-01

... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.65 Process safety... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Process safety information. 68.65... compilation of written process safety information before conducting any process hazard analysis required by...

School-based prevention program associated with increased short- and long-term retention of safety knowledge.

Science.gov (United States)

Klas, Karla S; Vlahos, Peter G; McCully, Michael J; Piche, David R; Wang, Stewart C

2015-01-01

Validation of program effectiveness is essential in justifying school-based injury prevention education. Although Risk Watch (RW) targets burn, fire, and life safety, its effectiveness has not been previously evaluated in the medical literature. Between 2007 and 2012, a trained fire service public educator (FSPE) taught RW to all second grade students in one public school district. The curriculum was delivered in 30-minute segments for 9 consecutive weeks via presentations, a safety smoke house trailer, a model-sized hazard house, a student workbook, and parent letters. A written pre-test (PT) was given before RW started, a post-test (PT#1) was given immediately after RW, and a second post-test (PT#2) was administered to the same students the following school year (ranging from 12 to 13 months after PT). Students who did not complete the PT or at least one post-test were excluded. Comparisons were made by paired t-test, analysis of variance, and regression analysis. After 183 (8.7%) were excluded for missing tests, 1,926 remaining students scored significantly higher (P = .0001) on PT#1 (mean 14.8) and PT#2 (mean 14.7) than the PT (mean 12.1). There was 1 FSPE and 36 school teachers with class size ranging from 10 to 27 (mean 21.4). Class size was not predictive of test score improvement (R = 0%), while analysis of variance showed that individual teachers trended toward some influence. This 6-year prospective study demonstrated that the RW program delivered by an FSPE effectively increased short-term knowledge and long-term retention of fire/life safety in early elementary students. Collaborative partnerships are critical to preserving community injury prevention education programs.

Preventing occupational injury among police officers: does motivation matter?

Science.gov (United States)

Chan, D K C; Webb, D; Ryan, R M; Tang, T C W; Yang, S X; Ntoumanis, N; Hagger, M S

2017-08-01

Injury prevention is an important issue for police officers, but the effectiveness of prevention initiatives is dependent on officers' motivation toward, and adherence to, recommended health and safety guidelines. To understand effects of police officers' motivation to prevent occupational injury on beliefs about safety and adherence to injury prevention behaviours. Full-time police officers completed a survey comprising validated psychometric scales to assess autonomous, controlled and amotivated forms of motivation (Treatment Self-Regulation Questionnaire), behavioural adherence (Self-reported Treatment Adherence Scale) and beliefs (Safety Attitude Questionnaire) with respect to injury prevention behaviours. There were 207 participants; response rate was 87%. Hierarchical multiple regression analyses demonstrated that autonomous motivation was positively related to behavioural adherence, commitment to safety and prioritizing injury prevention. Controlled motivation was a positive predictor of safety communication barriers. Amotivation was positively associated with fatalism regarding injury prevention, safety violation and worry. These findings are consistent with the tenets of self-determination theory in that autonomous motivation was a positive predictor of adaptive safety beliefs and adherence to injury prevention behaviours. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

The impact of occupational health and safety regulations on prevention through design in construction projects: Perspectives from Spain and the United Kingdom.

Science.gov (United States)

Martínez-Aires, María Dolores; Rubio Gámez, María Carmen; Gibb, Alistair

2015-01-01

Since the mid-1990 s, Prevention through Design (PtD) has become increasingly prevalent in the built environment. The acceptance of PtD has largely been due to the removal or reduction of risks during the execution phase of construction projects. European States have had the added impetus of national legislation. This paper analyzes the influence of European Union Directive 92/57/EEC on occupational safety and health injury prevention in the project design phase. Qualitative methods comprised individual semi-structured interviews and focus groups with a panel of experts. Sixty individuals from construction and related professions (architects, engineers, constructors, developers, and other construction experts) answered 17 key questions to establish national perceptions of the effectiveness of Directive 92/57/EEC in Spain and the United Kingdom (UK). The implementation of PtD in the project design phase in the UK is clearer since the regulations explicitly state the obligations of project designers as well as those of the coordinator. Interviews with Spanish experts show that, in Spain, the prevention culture is less frequently realized. The most significant differences between the European Directive and national regulations which influence PtD are linked to the Health and Safety Coordinator, and Health and Safety documents.

National report of Brazil on nuclear safety convention - introduction

International Nuclear Information System (INIS)

1998-01-01

This document was prepared for fulfilling the Brazilian obligations under the Convention on Nuclear Safety. Chapter 1 presents some historical aspects of the Brazilian nuclear policy, targets to be attained for increasing the nuclear energy contribution for the national production of electric energy

Occupational safety management: the role of causal attribution.

Science.gov (United States)

Gyekye, Seth Ayim

2010-12-01

The paper addresses the causal attribution theory, an old and well-established theme in social psychology which denotes the everyday, commonsense explanations that people use to explain events and the world around them. The attribution paradigm is considered one of the most appropriate analytical tools for exploratory and descriptive studies in social psychology and organizational literature. It affords the possibility of describing accident processes as objectively as possible and with as much detail as possible. Causal explanations are vital to the formal analysis of workplace hazards and accidents, as they determine how organizations act to prevent accident recurrence. Accordingly, they are regarded as fundamental and prerequisite elements for safety management policies. The paper focuses primarily on the role of causal attributions in occupational and industrial accident analyses and implementation of safety interventions. It thus serves as a review of the contribution of attribution theory to occupational and industrial accidents. It comprises six sections. The first section presents an introduction to the classic attribution theories, and the second an account of the various ways in which the attribution paradigm has been applied in organizational settings. The third and fourth sections review the literature on causal attributions and demographic and organizational variables respectively. The sources of attributional biases in social psychology and how they manifest and are identified in the causal explanations for industrial and occupational accidents are treated in the fifth section. Finally, conclusion and recommendations are presented. The recommendations are particularly important for the reduction of workplace accidents and associated costs. The paper touches on the need for unbiased causal analyses, belief in the preventability of accidents, and the imperative role of management in occupational safety management.

Introduction of a pet food safety law in Japan

Directory of Open Access Journals (Sweden)

Katsuaki Sugiura

2009-06-01

Full Text Available In response to a growing concern among Japanese people over the safety of pet food marketed in Japan, a Pet Food Safety Law was approved by the Diet in June 2008 and will be enforced in June 2009. The law obliges manufacturers and importers of pet food to observe the standards for production methods and labelling and compositional specifications set by the Ministry of the Environment (MoE and the Ministry of Agriculture, Forestry and Fisheries (MAFF. The law also obliges manufacturers, importers and distributors (excluding retailers of pet food to keep records of the name and quantity of pet food manufactured, imported and distributed. Within the compositional specifications, maximum residue limits have been established for aflatoxin B1 and certain organophosphorus pesticides and chemical preservatives. The establishment of standards for other mycotoxins, heavy metals, organochloride pesticides and other additives is scheduled for the near future.

Evaluation of safety balls and faceguards for prevention of injuries in youth baseball.

Science.gov (United States)

Marshall, Stephen W; Mueller, Frederick O; Kirby, Daniel P; Yang, Jingzhen

2003-02-05

Safety balls and faceguards are widely used in youth baseball, but their effectiveness in reducing injury is unknown. To evaluate the association of the use of faceguards and safety balls and injuries in youth baseball. Ecological study using a national database of compensated insurance claims maintained by Little League Baseball Incorporated, combined with data on the number of participants in Little League and data from a census of protective equipment usage for youth aged 5 to 18 years participating in Little League Baseball in the United States during 1997-1999. Rate of injury and injury rate ratio comparing users with nonusers of protective equipment. A total of 6 744 240 player-seasons of follow-up and 4233 compensated injury claims were available for analysis. The absolute incidence of compensated injury per 100 000 player-seasons was 28.02 (95% confidence interval [CI], 26.76-29.29) for ball-related injury and 2.71 (95% CI, 2.32-3.11) for facial injury. Overall, use of safety balls was associated with a reduced risk of ball-related injury (adjusted rate ratio, 0.77; 95% CI, 0.64-0.93). This reduction was essentially due to 1 type of safety ball, known as the reduced-impact ball (adjusted rate ratio, 0.72; 95% CI, 0.57-0.91). Use of faceguards reduced the risk of facial injury (adjusted rate ratio, 0.65; 95% CI, 0.43-0.98). Metal and plastic guards appeared to be equally effective. Safety balls appeared to be more effective in the minor division (ages 7-12 years) than in the regular division (ages 9-12 years). Reduced-impact balls and faceguards were associated with a reduced risk of injury in youth baseball. These findings support increased usage of these items; however, it should be noted that the absolute incidence of injury in youth baseball is low and that these equipment items do not prevent all injuries.

Application of preventive maintenance planning in a parquet ...

African Journals Online (AJOL)

STORAGESEVER

2009-04-20

Apr 20, 2009 ... Key words: Maintenance, preventive maintenance, enterprise, planning. INTRODUCTION .... There is machine introduction form on each machine. Moreover, ..... loy using total productive maintenance (TPM) approach. M.Sc.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Directory of Open Access Journals (Sweden)

Jiangshi Zhang

2016-11-01

Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

Science.gov (United States)

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

An introduction to hybrid fusion

International Nuclear Information System (INIS)

Reynolds, J.A.

1982-01-01

This report gives a brief introduction to some hybrid fusion proposals. The idea is to take advantage of the high neutron energy in fusion compared to fission either to breed fuel more efficiently than in a fast reactor, or increase the power output by fission of U 238 or transmute radioactive waste. The penalty is an increased cost and complexity of the blanket and the loss of environmental and safety arguments for fusion systems which rest on their low inventory of radioactive materials. (author)

Safety and efficacy of ALD403, an antibody to calcitonin gene-related peptide, for the prevention of frequent episodic migraine

DEFF Research Database (Denmark)

Dodick, David W; Goadsby, Peter J; Silberstein, Stephen D

2014-01-01

BACKGROUND: Calcitonin gene-related peptide (CGRP) is crucial in the pathophysiology of migraine. We assessed the safety, tolerability, and efficacy of ALD403, a genetically engineered humanised anti-CGRP antibody, for migraine prevention. METHODS: In this randomised, double-blind, placebo-contro...

Safety of treatments for primary Sjogren's syndrome

NARCIS (Netherlands)

van Nimwegen, Jolien F.; Moerman, R. V.; Smitt, Nicole Sillevis; Brouwer, Elisabeth; Bootsma, Hendrika; Vissink, Arjan

2016-01-01

Introduction: Primary Sjogren's syndrome (pSS) is a disabling auto-immune disease, affecting exocrine glands and several organs.Areas covered: In this review we analyze the safety of therapies used in pSS. Symptomatic treatment is widely applied due to the good supportive effect and good safety

New challenges for the internal safety organisation

DEFF Research Database (Denmark)

Hasle, Peter; Jensen, Per Langå

2003-01-01

Research from several countries indicates that the internal health and safety organisation in most companies is placed in an appendix position. Introduc-tion of learning is a possibility for the development of a stronger and more ef-fective health and safety organisation. This approach has been...

Age of the introduction of the first complementary food and determinants of its early introduction by Slovak mothers

Directory of Open Access Journals (Sweden)

Slávka Mrosková

2016-03-01

Full Text Available Aim: To assess the age of introduction of complementary food (CF and the factors leading to early introduction of CF (≤ four months. Design: Cross-sectional study. Methods: In the period October 2011 to April 2012 we conducted research on 405 mothers of infants living in the Slovak Republic, particularly in the regions of Prešov (56.0% and Košice (20.5%. The questionnaire, of our own design, integrated 13 factors. Statistical analysis included descriptive statistics and logistic regression (95% CI. Results: The first CF was introduced at 5.5 months (M = 5.47; SD = 1.22; range 1.0 to 10.0. Early introduction of CF was identified in 24.2% of children. A significantly higher risk of early introduction of first CF was found in respondents with: lower maternal age (OR = 4.436, lower levels of education (secondary education without GCE/vocational qualifications - OR = 10.140, lower maternal awareness of healthy nutrition (OR = 2.996, lower levels of satisfaction with their financial situation (OR = 1.927, and in single mothers (OR = 5.143, and children receiving combined milk nutrition rather than purely breastfeeding (OR = 3.888. Conclusion: Recognition of the factors leading to early introduction of CF allows the implementation of effective prevention strategies by health professionals.

Uncertain safety: allocating responsibilities for safety

National Research Council Canada - National Science Library

2009-01-01

Flood prevention, food safety, the transport of hazardous substances, infectious diseases, the risk of new Technologies and many other threats to public health and the environment call for ongoing public alertness...

Air pollution prevention at the Hanford Site: Status and recommendations

International Nuclear Information System (INIS)

Engel, J.A.

1995-08-01

With the introduction of the Clean Air Act Amendments of 1990 and other air and pollution prevention regulations, there has been increased focus on both pollution prevention and air emissions at US DOE sites. The Pollution Prevention (P2) Group of WHC reviewed the status of air pollution prevention with the goal of making recommendations on how to address air emissions at Hanford through pollution prevention. Using the air emissions inventory from Hanford's Title V permit, the P2 Group was able to identify major and significant air sources. By reviewing the literature and benchmarking two other DOE Sites, two major activities were recommended to reduce air pollution and reduce costs at the Hanford Site. First, a pollution prevention opportunity assessment (P2OA) should be conducted on the significant painting sources in the Maintenance group and credit should be taken for reducing the burning of tumbleweeds, another significant source of air pollution. Since they are significant sources, reducing these emissions will reduce air emission fees, as well as have the potential to reduce material and labor costs, and increase worker safety. Second, a P2OA should be conducted on alternatives to the three coal-fired powerhouses (steam plants) on-site, including a significant costs analysis of alternatives. This analysis could be of significant value to other DOE sites. Overall, these two activities would reduce pollution, ease regulatory requirements and fees, save money, and help Hanford take a leadership role in air pollution prevention

Swimming Pool Safety

Science.gov (United States)

... Spread the Word Shop AAP Find a Pediatrician Safety & Prevention Immunizations All Around At Home At Play ... Español Text Size Email Print Share Swimming Pool Safety Page Content ​What is the best way to ...

Design provisions for safety

International Nuclear Information System (INIS)

Birkhofer, A.

1983-01-01

Design provisions for safety of nuclear power plants are based on a well balanced concept: the public is protected against a release of radioactive material by multiple barriers. These barriers are protected according to a 'defence-in-depth' principle. The reactor safety concept is primarily aimed at the prevention of accidents, especially fuel damage. Additionally, measures for consequence limitation are provided in order to prevent a severe release of radioactivity to the environment. However, it is difficult to judge the overall effectiveness of such devices. In a comprehensive safety analysis it has to be shown that the protection systems and safeguards work with sufficient reliability in the event of an accident. For the reliability assessment deterministic criteria (single failure, redundancy, fail-safe, demand for diversity) play an important role. Increasing efforts have been made to assess reliability quantitatively by means of probabilistic methods. It is now usual to perform reliability analyses of essential systems of nuclear power plants in the course of licensing procedures. As an additional level of emergency measures for a further reduction of hazards a reasonable amount of accident information has to be transferred. Operational experience may be considered as an important feedback to the design of plant safety features. Operator training has to include, besides skill in performing of operating procedures, the training of a flexible response to different accident situations. Experience has shown that the design provisions for safety could prevent dangerous release of the radioactive material to the environment after an accident has occurred. For future developments of reactor safety, extensive analyses of operating experience are of great importance. The main goal should be to enhance the reliability of measures for accident prevention, which prevent the core from meltdown or other damages

Developing implementation strategies for firearm safety promotion in paediatric primary care for suicide prevention in two large US health systems: a study protocol for a mixed-methods implementation study.

Science.gov (United States)

Wolk, Courtney Benjamin; Jager-Hyman, Shari; Marcus, Steven C; Ahmedani, Brian K; Zeber, John E; Fein, Joel A; Brown, Gregory K; Lieberman, Adina; Beidas, Rinad S

2017-06-24

The promotion of safe firearm practices, or firearms means restriction, is a promising but infrequently used suicide prevention strategy in the USA. Safety Check is an evidence-based practice for improving parental firearm safety behaviour in paediatric primary care. However, providers rarely discuss firearm safety during visits, suggesting the need to better understand barriers and facilitators to promoting this approach. This study, Adolescent Suicide Prevention In Routine clinical Encounters, aims to engender a better understanding of how to implement the three firearm components of Safety Check as a suicide prevention strategy in paediatric primary care. The National Institute of Mental Health-funded Mental Health Research Network (MHRN), a consortium of 13 healthcare systems across the USA, affords a unique opportunity to better understand how to implement a firearm safety intervention in paediatric primary care from a system-level perspective. We will collaboratively develop implementation strategies in partnership with MHRN stakeholders. First, we will survey leadership of 82 primary care practices (ie, practices serving children, adolescents and young adults) within two MHRN systems to understand acceptability and use of the three firearm components of Safety Check (ie, screening, brief counselling around firearm safety and provision of firearm locks). Then, in collaboration with MHRN stakeholders, we will use intervention mapping and the Consolidated Framework for Implementation Research to systematically develop and evaluate a multilevel menu of implementation strategies for promoting firearm safety as a suicide prevention strategy in paediatric primary care. Study procedures have been approved by the University of Pennsylvania. Henry Ford Health System and Baylor Scott & White institutional review boards (IRBs) have ceded IRB review to the University of Pennsylvania IRB. Results will be submitted for publication in peer-reviewed journals. © Article

Safety and communication, a winning combination

CERN Multimedia

HSE Unit

2014-01-01

Since 2013, in line with its mission to support CERN’s proactive communication policy in matters of safety, the HSE unit has been following an annual plan for disseminating information on occupational health and safety and environmental protection.   Safety information designed to underline the importance of prevention is published through a variety of channels: Announcements in the CERN Bulletin, Safety bulletins, notably outlining lessons to be learned in the wake of accidents/incidents occuring at CERN, Safety alerts calling for immediate action, sent by e-mail to the services concerned, Prevention campaigns on the CERN site, Poster campaigns in well frequented public areas. Photo: Christoph Balle. Please heed all prevention messages and apply them in your everyday life. Also, we will be pleased to receive any information or suggestions you may have on safety matters. If you have questions about the HSE unit’s communication activities, please send us an e...

Radioactivity a very short introduction

CERN Document Server

Tuniz, Claudio

2012-01-01

Radioactivity: A Very Short Introduction explains radioactivity and discusses its fundamental role in nature. Radioactivity remains misunderstood and feared perhaps because nuclear radiation cannot be detected by human senses, and can undoubtedly do great harm if appropriate precautions are not taken. Radioactivity in the stars and in the Earth and its wide range of applications in biomedicine, science, industry, agriculture are described, as well as the mechanisms of nuclear fission and fusion, and the harnessing of nuclear power. The issues surrounding safety and security and the increasing concerns about nuclear terrorism are also considered.

Suicide Methods in Asia: Implications in Suicide Prevention

Directory of Open Access Journals (Sweden)

Paul S. F. Yip

2012-03-01

Full Text Available As the largest continent in the World, Asia accounts for about 60% of World suicides. Preventing suicide by restricting access to suicide methods is one of the few evidence-based suicide prevention strategies. However, there has been a lack of systematic exploration of suicide methods in Asian countries. To amend this shortage, the current review examines the leading suicide methods in different Asian countries, their trend, their age- and sex- specific characteristics, and their implications for suicide prevention. In total, 42 articles with leading suicide methods data in 17 Asian countries/regions were retrieved. The epidemiologic characteristics and recent trends of common suicide methods reflect specific socio-cultural, economic, and religious situations in the region. Common suicide methods shift with the introduction of technologies and constructions, and have specific age- or sex-characteristics that may render the restriction of suicide methods not equally effective for all sex and age sub-groups. Charcoal burning, pesticide poisoning, native plant poisoning, self-immolation, and jumping are all prominent examples. In the information society, suicide prevention that focuses on suicide methods must monitor and control the innovation and spread of knowledge and practices of suicide “technologies”. It may be more cost-effective to design safety into technologies as a way of suicide prevention while there is no rash of suicides yet by the new technologies. Further research on suicide methods is important for public health approaches to suicide prevention with sensitivity to socio-cultural, economic, and religious factors in different countries.

Suicide Methods in Asia: Implications in Suicide Prevention

Science.gov (United States)

Wu, Kevin Chien-Chang; Chen, Ying-Yeh; Yip, Paul S. F.

2012-01-01

As the largest continent in the World, Asia accounts for about 60% of World suicides. Preventing suicide by restricting access to suicide methods is one of the few evidence-based suicide prevention strategies. However, there has been a lack of systematic exploration of suicide methods in Asian countries. To amend this shortage, the current review examines the leading suicide methods in different Asian countries, their trend, their age- and sex- specific characteristics, and their implications for suicide prevention. In total, 42 articles with leading suicide methods data in 17 Asian countries/regions were retrieved. The epidemiologic characteristics and recent trends of common suicide methods reflect specific socio-cultural, economic, and religious situations in the region. Common suicide methods shift with the introduction of technologies and constructions, and have specific age- or sex-characteristics that may render the restriction of suicide methods not equally effective for all sex and age sub-groups. Charcoal burning, pesticide poisoning, native plant poisoning, self-immolation, and jumping are all prominent examples. In the information society, suicide prevention that focuses on suicide methods must monitor and control the innovation and spread of knowledge and practices of suicide “technologies”. It may be more cost-effective to design safety into technologies as a way of suicide prevention while there is no rash of suicides yet by the new technologies. Further research on suicide methods is important for public health approaches to suicide prevention with sensitivity to socio-cultural, economic, and religious factors in different countries. PMID:22690187

Work hazard prevention plans

International Nuclear Information System (INIS)

Albertos Campos, F.

2009-01-01

The prevention of industrial risks is a constantly evolving discipline that has changed considerable in the last 25 years. The Cofrentes Nuclear Power Plants has always been operated with a clear policy favoring prevention by supporting the principle of its integration, i. e., that the hierarchical functional organization of the company make sure that industrial risk prevention is effective and that health and safety standards are met. The historical evolution of occupational safety in the Cofrentes Nuclear Power Plant shows a a clear trend towards improvement and is the results of many years of hard work and effort by the plants own and contractor personnel in the field of industrial risk prevention. (Author)

40 CFR 68.48 - Safety information.

Science.gov (United States)

2010-07-01

...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 2 Prevention Program § 68.48 Safety information. (a) The... regulated substances, processes, and equipment: (1) Material Safety Data Sheets that meet the requirements...) Equipment specifications; and (5) Codes and standards used to design, build, and operate the process. (b...

Seveso II directive in prevention and mitigation of consequences of chemical terrorism, safety management systems in hazardous installations

International Nuclear Information System (INIS)

Klicek, M.

2009-01-01

Mayor accidents caused by hazardous substances are great threat to public. The consequences are often very severe with great number of injured people or even deaths and a great material damage. Statistic data shows that the main cause of accidents in hazardous installations is 'human factor', including the possibility of terrorist attack, or classic military operations. In order to ensure effective chemical safety, the actions should be taken by industry, public authorities, communities and other stake holders to prevent industrial accidents. Safety should be an integral part of the business activities of an enterprise, and all hazardous installations should strive to reach the ultimate goal of zero incidents. Safety management systems (SMS) should include appropriate technology and processes, as well as establishing an effective organisational structure. To mitigate consequences of accidents, emergency planning, land-use planning and risk communication is necessary. Adequate response in the event of accident should limit adverse consequences to health, environment and property. Follow-up actions are needed to learn from the accidents and other unexpected events, in order to reduce future incidents. In this paper the author will discus the implementing of SEVESO II directive in obtaining two main goals: major accident prevention and mitigation of consequences for men and environment in case of possible terrorist actions or military activities. Some Croatian experiences in implementing of UNEP APELL Programme, and its connection with SEVESO II directive will be shown.(author)

The risk of the introduction of classical swine fever virus at regional level in the European Union: a conceptual framework

NARCIS (Netherlands)

Vos, de C.J.; Saatkamp, H.W.; Huirne, R.B.M.; Dijkhuizen, A.A.

2003-01-01

Recent classical swine fever (CSF) epidemics in the European Union (EU) have clearly shown that preventing the introduction of CSF virus (CSFV) deserves high priority. Insight into all the factors contributing to the risk of CSFV introduction is a prerequisite for deciding which preventive actions

Integrated Safety in Design

DEFF Research Database (Denmark)

Schultz, Casper Siebken; Jørgensen, Kirsten

2014-01-01

An on-going research project investigates the inclusion of health and safety considerations in the design phase as a means to achieve a higher level of health and safety in the construction industry. Moreover, the approach is coupled to the overall quality efforts. Two architectural firms and two...... consulting engineering firms are project participants. The hypothesis is that health and safety problems in execution can be prevented through better planning in the early stages of the construction processes and that accidents are prevented by providing safety. In the first stage of the research project...... a theoretical framework is developed from a combination of existing literature on health and safety and a mapping of existing practices based on interviews in all four companies. The interviews revealed that the basic knowledge on OHS among architects and engineers is limited. Also currently designers typically...

41 CFR 128-1.8004 - Seismic Safety Coordinators.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic Safety Coordinators. 128-1.8004 Section 128-1.8004 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Bacteriophages and Their Role in Food Safety

Directory of Open Access Journals (Sweden)

Sanna M. Sillankorva

2012-01-01

Full Text Available The interest for natural antimicrobial compounds has increased due to alterations in consumer positions towards the use of chemical preservatives in foodstuff and food processing surfaces. Bacteriophages fit in the class of natural antimicrobial and their effectiveness in controlling bacterial pathogens in agro-food industry has led to the development of different phage products already approved by USFDA and USDA. The majority of these products are to be used in farm animals or animal products such as carcasses, meats and also in agricultural and horticultural products. Treatment with specific phages in the food industry can prevent the decay of products and the spread of bacterial diseases and ultimately promote safe environments in animal and plant food production, processing, and handling. This is an overview of recent work carried out with phages as tools to promote food safety, starting with a general introduction describing the prevalence of foodborne pathogens and bacteriophages and a more detailed discussion on the use of phage therapy to prevent and treat experimentally induced infections of animals against the most common foodborne pathogens, the use of phages as biocontrol agents in foods, and also their use as biosanitizers of food contact surfaces.

Nuclear safety

International Nuclear Information System (INIS)

Tarride, Bruno

2015-10-01

The author proposes an overview of methods and concepts used in the nuclear industry, at the design level as well as at the exploitation level, to ensure an acceptable safety level, notably in the case of nuclear reactors. He first addresses the general objectives of nuclear safety and the notion of acceptable risk: definition and organisation of nuclear safety (relationships between safety authorities and operators), notion of acceptable risk, deterministic safety approach and main safety principles (safety functions and confinement barriers, concept of defence in depth). Then, the author addresses the safety approach at the design level: studies of operational situations, studies of internal and external aggressions, safety report, design principles for important-for-safety systems (failure criterion, redundancy, failure prevention, safety classification). The next part addresses safety during exploitation and general exploitation rules: definition of the operation domain and of its limits, periodic controls and tests, management in case of incidents, accidents or aggressions

A qualification of the concept safety culture

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang

The number of accidents at work in Denmark has not declined in the last decade, despite different types of preventions methods. Traditionally preventions have been based on regulation of human behaviour or machinery. Recently safety culture has been presented as a new approach for the prevention...... of occupational accidents. The implicit models of organisation and man within mainstream safety culture approaches seem to be too rationalistic compared with day to day life of organisations. A safety culture concept is presented where the basis is symbolism....

Introduction to good practice in health, environment and safety management in enterprises

NARCIS (Netherlands)

Baranski, B.; Zwetsloot, G.

2000-01-01

Purpose of this paper, presented on the fifth annual meeting of the Baltic Sea Network on Occupational Health and Safety (Berlin, 18-19 November 1999), is to outline conceptual models of good practice (GP) in Health, Environment and Safety Management in Enterprises (HESME), present major components

Safety Precautions. Child Health and Safety Series (Module I).

Science.gov (United States)

Iscoe, Louise; And Others

This manual for parents and child care personnel in day care homes and centers provides guidelines and information on indoor and outdoor safety precautions, emergency preparation and first aid. Contents focus on monitoring arrivals and departures, prevention of suffocation and strangulation, control of pets and other animals, preventing and…

OSHA Training Programs. Module SH-48. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

Meeting the next generation PWR safety requirements: The EPR Reactor

International Nuclear Information System (INIS)

Salhi, Othman

2008-01-01

The development process pursued the harmonization of technical solutions and the integration of all the lessons learned from earlier nuclear plants built by both vendors. As far as safety more specifically is concerned, the basic choice for the EPR was to adopt an evolutionary approach based on experience feedback from the reactors built by Areva, which at the time already amounted to nearly 100. This philosophy makes today's Areva EPR the natural descendant of the most advanced French N4 and German Konvoi power reactors currently in operation. EPR design choices affecting safety were motivated by a continuous quest for higher levels of safety. A two-fold approach was followed: 1. improvement of the measures aimed at further reducing the already very low probability of core melt 2. incorporation of measures aimed at further limiting the consequences of a severe accident, in the knowledge that its probability of occurrence has been considerably reduced. Through its filiations with French N4 and German Konvoi power reactors, the EPR benefits from the uninterrupted, evolutionary innovation process that has supported the development of PWRs since their introduction into the market place. This is especially true for safety where the EPR brings a unique combination of both tried and tested and innovative features that further improve the prevention of severe accidents and their mitigation

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Russian Edition); Bezopasnost' atomnykh ehlektrostantsij: proektirovanie. Konkretnye trebovaniya bezopasnosti

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-04-15

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

Financing dengue vaccine introduction in the Americas: challenges and opportunities.

Science.gov (United States)

Constenla, Dagna; Clark, Samantha

2016-01-01

Dengue has escalated in the region of the Americas unabated despite major investments in integrated vector control and prevention strategies. An effective and affordable dengue vaccine can play a critical role in reducing the human and economic costs of the disease by preventing millions around the world from getting sick. However, there are considerable challenges on the path towards vaccine introduction. These include lack of sufficient financing tools, absence of capacity within national level decision-making bodies, and demands that new vaccines place on stressed health systems. Various financing models can be used to overcome these challenges including setting up procurement mechanisms, integrating regional and domestic taxes, and setting up low interest multilateral loans. In this paper we review these challenges and opportunities of financing dengue vaccine introduction in the Americas.

Introduction to nuclear science, second edition

CERN Document Server

Bryan, Jeff C.

2013-01-01

This book was written to provide students who have limited backgrounds in the physical sciences and math with an accessible textbook on nuclear science. Expanding on the foundation of the bestselling first edition, Introduction to Nuclear Science, Second Edition provides a clear and complete introduction to nuclear chemistry and physics, from basic concepts to nuclear power and medical applications. Incorporating suggestions from professors using this book for their courses, the author has created a new text that is approximately 60 percent larger and more comprehensive and flexible than the first.New to This Edition: Thorough review of nuclear forensics, radiology, gamma cameras, and decay through proton or neutron emission More detailed explanations of the necessary mathematics A chapter on dosimetry of radiation fields Expanded discussion of applications, introduced earlier in the text More in-depth coverage of nuclear reactors, including a new chapter examining more reactor types, their safety systems,...

Water safety and drowning

Science.gov (United States)

... among people of all ages. Learning and practicing water safety is important to prevent drowning accidents. ... Water safety tips for all ages include: Learn CPR . Never swim alone. Never dive into water unless ...

Modelling blood safety

NARCIS (Netherlands)

Janssen, M.P.

2010-01-01

This thesis describes the development and application of methods and models to support decision making on safety measures aimed at preventing the transmission of infections by blood donors. Safety measures refer to screening tests for blood donors, quarantine periods for blood plasma, or methods for

mathematical models for prediction of safety factors for a simply

African Journals Online (AJOL)

HOD

Keywords: reliability, code calibration, load factor, safety factor, design, steel beam. 1. INTRODUCTION ... safety factors for the design of a simply supported steel beam using regression .... 5 design criteria for a solid timber portal frame.

Assessment of Safety Culture in Isfahan Hospitals (2010)

OpenAIRE

Raeisi, Ahmed Reza; Nazari, Maryam; Bahmanziari, Najme

2013-01-01

Introduction: Many internal and external risk factors in health care organizations make safety important and it has caused the management to consider safety in their mission statement. One of the most important tools is to establish the appropriate organizational structure and safety culture. The goal: The goal of this research is to inform managers and staff about current safety culture status in hospitals in order to improve the efficiency and effectiveness of health services. Methods: This...

On safety management and nuclear safety - A frame of reference for studies of safety management with examples from non-nuclear contects of relevance for nuclear safety

International Nuclear Information System (INIS)

Svenson, O.; Allwin, P.; Salo, I.

2004-03-01

The report includes three case studies of safety management. The studies are presented as chapters, but are written in a format that makes them easy to read separately. Two of the studies cover regulators (the Swedish Civil Aviation Safety Authority, Luftfartsinspektionen) and the Norwegian Petroleum Directorate) and one a regulated activity/industry (a car manufacturer, Volvo Car). The introduction outlines a living system framework and relates this to concepts used in organizational management. The report concludes with some findings with potential relevance for safety management in the nuclear power domain. In the next phase of the work, the regulated counterparts of the regulators here will be investigated in addition to a fourth case study of a regulated activity/industry. (au)

Farm Health and Safety

Science.gov (United States)

... the United States. Farms have many health and safety hazards, including Chemicals and pesticides Machinery, tools and ... inspection and maintenance can help prevent accidents. Using safety gloves, goggles and other protective equipment can also ...

Introduction

DEFF Research Database (Denmark)

Høgfeldt Hansen, Leif

2016-01-01

This introduction to South Korean architecture gives an overall view of the architecture done in the country in historic times as well as a general introduction to the culture of the country.......This introduction to South Korean architecture gives an overall view of the architecture done in the country in historic times as well as a general introduction to the culture of the country....

Introduction of mixed oxide fuel elements in the belgian cores

International Nuclear Information System (INIS)

Charlier, A.F.; Hollasky, N.A.

1994-01-01

The important amount of plutonium recovered from the reprocessing of spent fuel on the one hand, the national and international experience of the use of mixed oxide UO 2 -PuO 2 fuel in power reactors on the other hand, have led Belgian utilities to decide the introduction of Mixed-Oxide fuel in Doel unit 3 and Tihange unit 2 cores. The 'MOX' project has shown that it was possible without reducing safety or requiring modifications of the plant equipment. It has been approved by the Belgian 'Nuclear Safety Commission'. (authors). 1 tab., 2 figs

Consensus communication on early peanut introduction and the prevention of peanut allergy in high-risk infants

DEFF Research Database (Denmark)

Fleischer, David M; Sicherer, Scott; Greenhawt, Matthew

2015-01-01

The purpose of this brief communication is to highlight emerging evidence to existing guidelines regarding potential benefits of supporting early, rather than delayed, peanut introduction during the period of complementary food introduction in infants. This document should be considered as interim...

Inspirations from Dupont Safety Management System

Institute of Scientific and Technical Information of China (English)

Ma Yong

2009-01-01

@@ Dupont,with its 200 years of safety management experience,tells us:all safety accidents can be prevented. Dupont has a history of more than 200 years,the concept of "safety is priority"has never changed.Dupont is just another word for safety.

Advantages and pitfalls of the Swedish National Program for Suicide Prevention 2008

Directory of Open Access Journals (Sweden)

Anna Baran

2015-12-01

Full Text Available Introduction: The World Health Organization report (2014 recommends the introduction of national programs for suicide prevention. However, the research on their effectiveness is scarce. As a result, policy makers do not have sufficient data for their decisions on the appropriate level of investment in suicide prevention. It is of great importance to know whether the introduction of a national prevention program results in a reduction in suicide rates, and if so, in what age groups and over what period of time after the announcement of the program. Sweden introduced the first suicide prevention program in 1995. It was then modified in 2008, and most recently in 2015. Objectives: The aim of this study was to answer the question about the impact of the suicide prevention program in Sweden (2008 on the total suicide rate as well as the age- and gender-specific suicide rates in the subsequent years. Material and methods: The study provides the overview of the suicide prevention program and suicide rates in Sweden in males and females, in the age groups 0–24, 25–44, 45–64 and over 65, 1, 3 and 6 years before and after the introduction of the national program for suicide prevention. The study presents the statistical analysis of changes in average suicide rates following the announcement of the Swedish National Program for Suicide Prevention 2008 with reference to chosen periods. Conclusions: The Swedish National Program for Suicide Prevention did not result in the reduction of suicide rates in the year after its introduction, whereas suicide rates decreased in all groups, except for the youth (under 24 years old, in 2009–2011 and 2009–2014.

Reload core safety verification

International Nuclear Information System (INIS)

Svetlik, M.; Minarcin, M.

2003-01-01

This paper presents a brief look at the process of reload core safety evaluation and verification in Slovak Republic. It gives an overview of experimental verification of selected nuclear parameters in the course of physics testing during reactor start-up. The comparison of IAEA recommendations and testing procedures at Slovak and European nuclear power plants of similar design is included. An introduction of two level criteria for evaluation of tests represents an effort to formulate the relation between safety evaluation and measured values (Authors)

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Prevention: Exercise

Medline Plus

Full Text Available ... Steroid Injections Lumbar Zygapophysical (Facet) Joint Injections PREVENTION Lifestyle Choices 10 Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen ...

Effectiveness of Crime Prevention through Environmental Design ...

African Journals Online (AJOL)

This study examined crime prevention strategies vis-a-vis perceived residents. feeling of safety in Osogbo Nigeria. The survey was conducted using systematic sampling. Four (4) crime prevention approaches were identified in the study area. Residents. perception of effectiveness of these safety strategies measured ...

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes

Directory of Open Access Journals (Sweden)

Serena Lucrezi

2018-03-01

prevention campaigns and training. The study supports the introduction of programmes aiming to create a culture of safety among dive centres and scuba divers. Two examples, which are described in this paper, include the Hazard Identification and Risk Assessment protocol for dive centres and scuba divers, and the Diving Safety Officer programme to create awareness, improve risk management, and mitigate health and safety risks.

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes

Science.gov (United States)

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers’ and dive centres’ perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres’ perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention

Safety Priorities and Underestimations in Recreational Scuba Diving Operations: A European Study Supporting the Implementation of New Risk Management Programmes.

Science.gov (United States)

Lucrezi, Serena; Egi, Salih Murat; Pieri, Massimo; Burman, Francois; Ozyigit, Tamer; Cialoni, Danilo; Thomas, Guy; Marroni, Alessandro; Saayman, Melville

2018-01-01

Introduction: Scuba diving is an important marine tourism sector, but requires proper safety standards to reduce the risks and increase accessibility to its market. To achieve safety goals, safety awareness and positive safety attitudes in recreational scuba diving operations are essential. However, there is no published research exclusively focusing on scuba divers' and dive centres' perceptions toward safety. This study assessed safety perceptions in recreational scuba diving operations, with the aim to inform and enhance safety and risk management programmes within the scuba diving tourism industry. Materials and Methods: Two structured questionnaire surveys were prepared by the organisation Divers Alert Network and administered online to scuba diving operators in Italy and scuba divers in Europe, using a mixture of convenience and snowball sampling. Questions in the survey included experience and safety offered at the dive centre; the buddy system; equipment and accessories for safe diving activities; safety issues in the certification of new scuba divers; incidents/accidents; and attitudes toward safety. Results: 91 scuba diving centres and 3,766 scuba divers participated in the study. Scuba divers gave importance to safety and the responsiveness of service providers, here represented by the dive centres. However, they underestimated the importance of a personal emergency action/assistance plan and, partly, of the buddy system alongside other safety procedures. Scuba divers agreed that some risks, such as those associated with running out of gas, deserve attention. Dive centres gave importance to aspects such as training and emergency action/assistance plans. However, they were limitedly involved in safety campaigning. Dive centres' perceptions of safety in part aligned with those of scuba divers, with some exceptions. Conclusion: Greater responsibility is required in raising awareness and educating scuba divers, through participation in prevention campaigns

Prevention

DEFF Research Database (Denmark)

Halken, S; Høst, A

2001-01-01

, breastfeeding should be encouraged for 4-6 months. In high-risk infants a documented extensively hydrolysed formula is recommended if exclusive breastfeeding is not possible for the first 4 months of life. There is no evidence for preventive dietary intervention neither during pregnancy nor lactation...... populations. These theories remain to be documented in proper, controlled and prospective studies. Breastfeeding and the late introduction of solid foods (>4 months) is associated with a reduced risk of food allergy, atopic dermatitis, and recurrent wheezing and asthma in early childhood. In all infants....... Preventive dietary restrictions after the age of 4-6 months are not scientifically documented....

State of infection prevention in US hospitals enrolled in the National Health and Safety Network.

Science.gov (United States)

Stone, Patricia W; Pogorzelska-Maziarz, Monika; Herzig, Carolyn T A; Weiner, Lindsey M; Furuya, E Yoko; Dick, Andrew; Larson, Elaine

2014-02-01

This report provides a national cross-sectional snapshot of infection prevention and control programs and clinician compliance with the implementation of processes to prevent health care-associated infections (HAIs) in intensive care units (ICUs). All hospitals, except Veterans Affairs hospitals, enrolled in the National Healthcare Safety Network (NHSN) were eligible to participate. Participation involved completing a survey assessing the presence of evidence-based prevention policies and clinician adherence and joining our NHSN research group. Descriptive statistics were computed. Facility characteristics and HAI rates by ICU type were compared between respondents and nonrespondents. Of the 3,374 eligible hospitals, 975 provided data (29% response rate) on 1,653 ICUs, and there were complete data on the presence of policies in 1,534 ICUs. The average number of infection preventionists (IPs) per 100 beds was 1.2. Certification of IP staff varied across institutions, and the average hours per week devoted to data management and secretarial support were generally low. There was variation in the presence of policies and clinician adherence to these policies. There were no differences in HAI rates between respondents and nonrespondents. Guidelines for IP staffing in acute care hospitals need to be updated. In future work, we will analyze the associations between HAI rates and infection prevention and control program characteristics, as well as the inplementation of and clinician adherence to evidence-based policies. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. All rights reserved.

Fire Safety (For Parents)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Fire Safety KidsHealth / For Parents / Fire Safety What's in ... event of a fire emergency in your home. Fire Prevention Of course, the best way to practice ...

Role of supervising authorities in NPP operation safety ensuring

International Nuclear Information System (INIS)

Elagin, Yu.P.

2001-01-01

The main working spheres and results gained during 40 years of activity of the Great Britain Nuclear Installation Inspectorate (NII) are considered. The new approach to safety analysis developed with NII participation is described in details. The important role of the safety analysis realization, utilization of modern methods for risk estimation and safety culture principles introduction at NPPs is shown [ru

Nuclear reactors. Introduction

International Nuclear Information System (INIS)

Boiron, P.

1997-01-01

This paper is an introduction to the 'nuclear reactors' volume of the Engineers Techniques collection. It gives a general presentation of the different articles of the volume which deal with: the physical basis (neutron physics and ionizing radiations-matter interactions, neutron moderation and diffusion), the basic concepts and functioning of nuclear reactors (possible fuel-moderator-coolant-structure combinations, research and materials testing reactors, reactors theory and neutron characteristics, neutron calculations for reactor cores, thermo-hydraulics, fluid-structure interactions and thermomechanical behaviour of fuels in PWRs and fast breeder reactors, thermal and mechanical effects on reactors structure), the industrial reactors (light water, pressurized water, boiling water, graphite moderated, fast breeder, high temperature and heavy water reactors), and the technology of PWRs (conceiving and building rules, nuclear parks and safety, reactor components and site selection). (J.S.)

Industrial safety management with emphasis on construction safety

International Nuclear Information System (INIS)

Bhattacharya, R.

2016-01-01

Safety professionals, line managers, team leaders and concerned workers today eagerly discuss to find out the best safety approach for their workplace. Some research suggested that behaviour based and comprehensive ergonomics approaches lead in average reduction of injuries. This article discusses 'the science and engineering' behind improvement in industrial safety aspects particularly at construction sites through various safety approaches. A high degree of commitment to safety by the project management and rigorous and proactive measures are essential to prevent accidents at construction sites particularly in DAE units because of its sensitivity. Persistent efforts by the project management are needed for sustainable and committed safety at work place. The number of fatalities occurring from construction work in DAE units is sometimes disturbing and fall of person from height and through openings are the major causes for serious accidents

Strategies to Prevent Cholera Introduction during International Personnel Deployments: A Computational Modeling Analysis Based on the 2010 Haiti Outbreak

Science.gov (United States)

Lewnard, Joseph A.; Antillón, Marina; Gonsalves, Gregg; Miller, Alice M.; Ko, Albert I.; Pitzer, Virginia E.

2016-01-01

Background Introduction of Vibrio cholerae to Haiti during the deployment of United Nations (UN) peacekeepers in 2010 resulted in one of the largest cholera epidemics of the modern era. Following the outbreak, a UN-commissioned independent panel recommended three pre-deployment intervention strategies to minimize the risk of cholera introduction in future peacekeeping operations: screening for V. cholerae carriage, administering prophylactic antimicrobial chemotherapies, or immunizing with oral cholera vaccines. However, uncertainty regarding the effectiveness of these approaches has forestalled their implementation by the UN. We assessed how the interventions would have impacted the likelihood of the Haiti cholera epidemic. Methods and Findings We developed a stochastic model for cholera importation and transmission, fitted to reported cases during the first weeks of the 2010 outbreak in Haiti. Using this model, we estimated that diagnostic screening reduces the probability of cases occurring by 82% (95% credible interval: 75%, 85%); however, false-positive test outcomes may hamper this approach. Antimicrobial chemoprophylaxis at time of departure and oral cholera vaccination reduce the probability of cases by 50% (41%, 57%) and by up to 61% (58%, 63%), respectively. Chemoprophylaxis beginning 1 wk before departure confers a 91% (78%, 96%) reduction independently, and up to a 98% reduction (94%, 99%) if coupled with vaccination. These results are not sensitive to assumptions about the background cholera incidence rate in the endemic troop-sending country. Further research is needed to (1) validate the sensitivity and specificity of rapid test approaches for detecting asymptomatic carriage, (2) compare prophylactic efficacy across antimicrobial regimens, and (3) quantify the impact of oral cholera vaccine on transmission from asymptomatic carriers. Conclusions Screening, chemoprophylaxis, and vaccination are all effective strategies to prevent cholera introduction

Safety culture and the 5 steps to safer surgery: an intervention study.

Science.gov (United States)

Hill, M R; Roberts, M J; Alderson, M L; Gale, T C E

2015-06-01

Improvements in safety culture have been postulated as one of the mechanisms underlying the association between the introduction of the World Health Organisation (WHO) Surgical Safety Checklist with perioperative briefings and debriefings, and enhanced patient outcomes. The 5 Steps to Safer Surgery (5SSS) incorporates pre-list briefings, the three steps of the WHO Surgical Safety Checklist (SSC) and post-list debriefings in one framework. We aimed to identify any changes in safety culture associated with the introduction of the 5SSS in orthopaedic operating theatres. We assessed the safety culture in the elective orthopaedic theatres of a large UK teaching hospital before and after introduction of the 5SSS using a modified version of the Safety Attitude Questionnaire - Operating Room (SAQ-OR). Primary outcome measures were pre-post intervention changes in the six safety culture domains of the SAQ-OR. We also analysed changes in responses to two items regarding perioperative briefings. The SAQ-OR survey response rate was 80% (60/75) at baseline and 74% (53/72) one yr later. There were significant improvements in both the reported frequency (Pculture domain scores (Working Conditions, Perceptions of Management, Job Satisfaction, Safety Climate and Teamwork Climate) of the SAQ-OR (Pculture of elective orthopaedic operating theatres. © The Author 2015. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Efficacy and safety of intermittent preventive treatment for malaria in schoolchildren: a systematic review.

Science.gov (United States)

Matangila, Junior R; Mitashi, Patrick; Inocêncio da Luz, Raquel A; Lutumba, Pascal T; Van Geertruyden, Jean-Pierre

2015-11-14

Intermittent preventive treatment (IPT) is a proven malaria control strategy in infants and pregnancy. School-aged children represent 26 % of the African population, and an increasing percentage of them are scholarized. Malaria is causing 50 % of deaths in this age group and malaria control efforts may shift the malaria burden to older age groups. Schools have been suggested as a platform for health interventions delivery (deworming, iron-folic acid, nutrients supplementation, (boost-)immunization) and as a possible delivery system for IPT in schoolchildren (IPTsc). However, the current evidence on the efficacy and safety of IPTsc is limited and the optimal therapeutic regimen remains controversial. A systematic search for studies reporting efficacy and safety of IPT in schoolchildren was conducted using PubMed, Web of Science, Clinicaltrials and WHO/ICTRP database, and abstracts from congresses with the following key words: intermittent, preventive treatment AND malaria OR Plasmodium falciparum AND schoolchildren NOT infant NOT pregnancy. Five studies were identified. Most IPTsc regimes demonstrated substantial protection against malaria parasitaemia, with dihydroartemisinin-piperaquine (DP) given monthly having the highest protective effect (PE) (94 %; 95 % CI 93-96). Contrarily, SP did not provide any PE against parasitaemia. However, no IPT regimen provided a PE above 50 % in regard to anaemia, and highest protection was provided by SP+ amodiaquine (AQ) given four-monthly (50 %; 95 % CI 41-53). The best protection against clinical malaria was observed in children monthly treated with DP (97 %; 95 % CI 87-98). However, there was no protection when the drug was given three-monthly. No severe adverse events were associated with the drugs used for IPTsc. IPTsc may reduce the malaria-related burden in schoolchildren. However, more studies assessing efficacy of IPT in particular against malaria-related anaemia and clinical malaria in schoolchildren must be conducted.

Economics of food safety in chains: a review of general principles

NARCIS (Netherlands)

Valeeva, N.I.; Meuwissen, M.P.M.; Huirne, R.B.M.

2004-01-01

The increased demand for safer food has resulted in the development and introduction of new food safety standards and regulations to reach a higher level of food safety. An integrated approach of controlling food safety throughout the entire food chain (`farm to table`) has become an important issue

Child Safety: MedlinePlus Health Topic

Science.gov (United States)

... injuries in children (Medical Encyclopedia) Also in Spanish Topic Image MedlinePlus Email Updates Get Child Safety updates ... safety Preventing head injuries in children Related Health Topics Infant and Newborn Care Internet Safety Motor Vehicle ...

78 FR 40743 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2013-07-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... Director, NIOSH, on priorities in mine safety and health research, including grants and contracts for such...

Fast breeder reactors an engineering introduction

CERN Document Server

Judd, A M

1981-01-01

Fast Breeder Reactors: An Engineering Introduction is an introductory text to fast breeder reactors and covers topics ranging from reactor physics and design to engineering and safety considerations. Reactor fuels, coolant circuits, steam plants, and control systems are also discussed. This book is comprised of five chapters and opens with a brief summary of the history of fast reactors, with emphasis on international and the prospect of making accessible enormous reserves of energy. The next chapter deals with the physics of fast reactors and considers calculation methods, flux distribution,

Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition); Surete radiologique en radiographie industrielle

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-05-15

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in Horizontal-Ellipsis shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Recent advancement to prevent the development of allergy and allergic diseases and therapeutic strategy in the perspective of barrier dysfunction

Directory of Open Access Journals (Sweden)

Osamu Natsume

2018-01-01

Full Text Available Therapeutic strategy in late 20th century to prevent allergic diseases was derived from a conceptual framework of allergens elimination which was as same as that of coping with them after their onset. Manifold trials were implemented; however, most of them failed to verify the effectiveness of their preventive measures. Recent advancement of epidemiological studies and cutaneous biology revealed epidermal barrier dysfunction plays a major role of allergen sensitization and development of atopic dermatitis which ignites the inception of allergy march. For this decade, therapeutic strategy to prevent the development of food allergy has been confronted with a paradigm shift from avoidance and delayed introduction of allergenic foods based on the theoretical concept to early introduction of them based on the clinical and epidemiological evidences. Especially, prevention of peanut allergy and egg allergy has been established with the highest evidence verified by randomized controlled trials, although application in clinical practice should be done with attention. This paradigm shift concerning food allergy was also due to the discovery of cutaneous sensitization risk of food allergens for an infant with eczema revealed by prospective studies. Here we have recognized the increased importance of prevention of eczema/atopic dermatitis in infancy. Two randomized controlled trials using emollients showed successful results in prevention of atopic dermatitis in infancy; however, longer term safety and prognosis including allergy march should be pursued. To establish more fundamental strategy for prevention of the development of allergy, further studies clarifying the mechanisms of interaction between barrier dysfunction and microbial milieu are needed with macroscope to understand the relationship between allergic diseases and a diversity of environmental influences.

41 CFR 128-1.8006 - Seismic Safety Program requirements.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Seismic Safety Program requirements. 128-1.8006 Section 128-1.8006 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

The study of technological prevention method of road accident ...

African Journals Online (AJOL)

The study of technological prevention method of road accident related to driver and vehicle. ... road accident prevention method based on the factors studied. The study of this paper can provide forceful data analysis support for the road traffic safety related research. Keywords: road accident; accident prevention; road safety.

75 FR 12554 - Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety...

Science.gov (United States)

2010-03-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Mine Safety and Health Research Advisory Committee, National Institute for Occupational Safety and Health (MSHRAC, NIOSH... priorities in mine safety and health research, including grants and contracts for such research, 30 U.S.C...

Introduction of the activity of the radiation safety for KOMAC

Energy Technology Data Exchange (ETDEWEB)

Min, Yi Sub; Park, Sung Kyun; Park, Jeong Min; Cho, Yong Sub [KAERI, Daejeon (Korea, Republic of)

2016-05-15

The 100 MeV linear proton accelerator as well as the various types of the ion accelerator have been operated and developed in KOMAC. These accelerators are classified as a radiation generator by the nuclear law of Korea. The operation of these accelerators included in the KOMAC site should be approved by Nuclear Safety and Security Committee (NSSC). This paper introduces the activity in terms of the radiation safety for these accelerator operations and their future plan. The model of the ion beam accelerator for analysis installed in KOMAC is a 5SDH-2, produced by National Electrostatics Corporation. This ion beam accelerator, devolved from Korea Institute of Geoscience and Mineral Resources (KIGAM), consists of two ion source, accelerating tanks and four beamlines. Ions in the ion beam accelerator are accelerated using a tandem method, that is, ions accelerated have been drawn out by the negative ions from the ion source and then changed into positive ions in the acceleration tube intermediate.

Environmental, safety, and health engineering

International Nuclear Information System (INIS)

Woodside, G.; Kocurek, D.

1997-01-01

A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics

Safety tests file

International Nuclear Information System (INIS)

2011-01-01

The design and operation of nuclear power plants is governed by strict and clearly defined regulations designed to ensure their safety in all circumstances. Since the first nuclear reactors were commissioned, the basic safety principles and the corresponding practical requirements have constantly evolved and been enhanced, benefiting from operating experience feedback from reactors around the world (about 500 production reactors currently in service). Reactor safety has from the outset been built around the 'defense in depth' concept, which aims to prevent melting of the core and radioactive releases into the environment. It can be summarized as follows: over and above all the measures taken to prevent accidents, the principle that accidents do occur has to be accepted. We then assess their consequences and take steps to contain them at the level of severity at which they occur. (authors)

Nuclear safety policy statement in korea

International Nuclear Information System (INIS)

Kim, W.S.; Kim, H.J.; Choi, K.S.; Choi, Y.S.; Park, D.K.

2006-01-01

Full text: Wide varieties of programs to enhance nuclear safety have been established and implemented by the Korean government in accordance with the Nuclear Safety Policy Statement announced in September 1994. The policy statement was intended to set the long-term policy goals for maintaining and achieving high-level of nuclear safety and also help the public understand the national policy and a strong will of the government toward nuclear safety. It has been recognized as very effective in developing safety culture in nuclear-related organizations and also enhancing nuclear safety in Korea. However, ageing of operating nuclear power plants and increasing of new nuclear facilities have demanded a new comprehensive national safety policy to cover the coming decade, taking the implementation results of the policy statement of 1994 and the changing environment of nuclear industries into consideration. Therefore, the results of safety policy implementation have been reviewed and, considering changing environment and future prospects, a new nuclear safety policy statement as a highest level national policy has been developed. The implementation results of 11 regulatory policy directions such as the use of Probabilistic Safety Assessment, introduction of Periodic Safety Review, strengthening of safety research, introduction of Risk Based Regulation stipulated in the safety policy statement of 1994 were reviewed and measures taken after various symposia on nuclear safety held in Nuclear Safety Days since 1995 were evaluated. The changing international and domestic environment of nuclear industry were analysed and future prospects were explored. Based on the analysis and review results, a draft of new nuclear safety policy statement was developed. The draft was finalized after the review of many prominent experts in Korea. Considering changing environment and future prospects, new policy statement that will show government's persistent will for nuclear safety has been

Guide for understanding and evaluation of safety culture

International Nuclear Information System (INIS)

2008-01-01

This report was the guide of understanding and evaluation of safety culture. Operator's activities for enhancement of safety culture in nuclear installations became an object of safety regulation in the management system. Evaluation of operator's activities (including top management's involvement) to prevent degradation of safety culture and organization climate in daily works needed understanding of safety culture and diversity of operator's activities. This guide was prepared to check indications of degradation of safety culture and organization climate in operator's activities in daily works and encourage operator's activities to enhance safety culture improvement and good practice. Comprehensive evaluation of operator's activities to prevent degradation of safety culture and organization climate would be performed from the standpoints of 14 safety culture elements such as top management commitment, clear plan and implementation of upper manager, measures to avoid wrong decision making, questioning attitude, reporting culture, good communications, accountability and openness, compliance, learning system, activities to prevent accidents or incidents beforehand, self-assessment or third party evaluation, work management, change management and attitudes/motivation. Element-wise examples and targets for evaluation were attached with evaluation check tables. (T. Tanaka)

Safety indicators: an efficient tool for a better safety

International Nuclear Information System (INIS)

Aufort, P.; Lars, R.

1993-01-01

Safety indicators based on the examination of the Operating Technical Specifications have been defined with the aim of following the in-operation safety level of French nuclear power plants. These safety indicators are operation feedback tools which permit the a posteriori justification and the adjustment of actual procedures. They would allow detection of an abnormal unavailability occurrence rate or a situation revealing a potential safety problem. So, data acquisition, processing, analysis and display software allowing trend analysis of these indicators has been developed so far as: a reflexion tool for the power plant operators about the safety instructions and the adjustment of preventive maintenance, and a help for decision making at a national level for the examination and the improvement of Operating Technical Specifications. This paper presents the objectives of these safety indicators, the processing tool associated, the preliminary results obtained and more elaborate processing of these indicators. These safety indicators may be very useful in framing probabilistic safety assessments. (author)

Commentary: Status of road safety in Asia.

Science.gov (United States)

Wismans, Jac; Skogsmo, Ingrid; Nilsson-Ehle, Anna; Lie, Anders; Thynell, Marie; Lindberg, Gunnar

2016-01-01

The objective of this article is to assess the status of road safety in Asia and present accident and injury prevention strategies based on global road safety improvement experiences and discuss the way forward by indicating opportunities and countermeasures that could be implemented to achieve a new level of safety in Asia. This study provides a review and analyses of data in the literature, including from the World Health Organization (WHO) and World Bank, and a review of lessons learned from best practices in high-income countries. In addition, an estimation of costs due to road transport injuries in Asia and review of future trends in road transport is provided. Data on the global and Asian road safety problem and status of prevention strategies in Asia as well as recommendations for future actions are discussed. The total number of deaths due to road accidents in the 24 Asian countries, encompassing 56% of the total world population, is 750,000 per year (statistics 2010). The total number of injuries is more than 50 million, of which 12% are hospital admissions. The loss to the economy in the 24 Asian countries is estimated to around US$800 billion or 3.6% of the gross domestic product (GDP). This article clearly shows that road safety is causing large problems and high costs in Asia, with an enormous impact on the well-being of people, economy, and productivity. In many Asian low- and middle-income countries, the yearly number of fatalities and injuries is increasing. Vulnerable road users (pedestrians, cyclists, and motorcyclists combined) are particularly at risk. Road safety in Asia should be given rightful attention, including taking powerful, effective actions. This review stresses the need for reliable accident data, because there is considerable underreporting in the official statistics. Reliable accident data are imperative to determine evidence-based intervention strategies and monitor the success of these interventions and analyses. On the other

RF radiation safety handbook

International Nuclear Information System (INIS)

Kitchen, Ronald.

1993-01-01

Radio frequency radiation can be dangerous in a number of ways. Hazards include electromagnetic compatibility and interference, electro-explosive vapours and devices, and direct effects on the human body. This book is a general introduction to the sources and nature of RF radiation. It describes the ways in which our current knowledge, based on relevant safety standards, can be used to safeguard people from any harmful effects of RF radiation. The book is designed for people responsible for, or concerned with, safety. This target audience will primarily be radio engineers, but includes those skilled in other disciplines including medicine, chemistry or mechanical engineering. The book covers the problems of RF safety management, including the use of measuring instruments and methods, and a review of current safety standards. The implications for RF design engineers are also examined. (Author)

No nuclear safety without security

International Nuclear Information System (INIS)

Anon.

2016-01-01

ead of Health and Safety - Nuclear Safety and Corporate Security at ENGIE Benelux, Pierre Doumont has the delicate job of defining and implementing measures, including cybersecurity, to prevent the risk of malevolent acts against tangible and intangible assets. He gives some hints on the contribution of nuclear security to safety.

Inland Waterway Environmental Safety

Science.gov (United States)

Reshnyak, Valery; Sokolov, Sergey; Nyrkov, Anatoliy; Budnik, Vlad

2018-05-01

The article presents the results of development of the main components of the environmental safety when operating vessels on inland waterways, which include strategy selection ensuring the environmental safety of vessels, the selection and justification of a complex of environmental technical means, activities to ensure operation of vessels taking into account the environmental technical means. Measures to ensure environmental safety are developed on the basis of the principles aimed at ensuring environmental safety of vessels. They include the development of strategies for the use of environmental protection equipment, which are determined by the conditions for wastewater treatment of purified sewage and oily bilge water as well as technical characteristics of the vessels, the introduction of the process of the out-of-the-vessel processing of ship pollution as a technology for their movement. This must take into account the operating conditions of vessels on different sections of waterways. An algorithm of actions aimed at ensuring ecological safety of operated vessels is proposed.

Nuclear safety in France

International Nuclear Information System (INIS)

Queniart, D.

1989-12-01

This paper outlines the organizational and technical aspects of nuclear safety in France. From the organization point of view, the roles of the operator, of the safety authority and of the Institute for Protection and Nuclear Safety are developed. From the technical viewpoint, the evolution of safety since the beginning of the French nuclear programme, the roles of deterministic and probabilistic methods and the severe accident policy (prevention and mitigation, venting containment) in France are explained

The impact of WASH-1400 on reactor safety evaluation

International Nuclear Information System (INIS)

Tanguy, P.Y.

1976-01-01

Trends in reactor safety evaluation in France following the publication of WASH-1400 (the Rasmussen Report) are presented. What is called 'the meteorite case' is first schematically presented as follows: WASH-1400 shows nuclear risk equivalent to meteorite risk and reasonable corrections cannot make many orders of magnitude, consequently present safety rules are adequate. The very impact of WASH-1400 on safety approach is then discussed as for: assistance to deterministic safety analysis, introduction of probabilistic safety criteria, acceptable level of risk, and the use of results in research and reactor operating experience

WGOE Discussion topic introduction: Counterfeit, Suspect, and Fraudulent parts

International Nuclear Information System (INIS)

Thorp, John

2011-01-01

This presentation (slides) provided an introduction to CSFI discussion. It presents: 1 - the many faces of counterfeiting (design and intellectual property, manufacturing and fabrication, product control, branding and document fraud), 2 - the key messages from the June 3, 2010 US-NRC Commission Briefing, 3 - the Regulator's role in ensuring nuclear plant safety, 4 - the CSFI survey status, 5 - the questions to be discussed during the meeting

Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Spanish Edition); Seguridad de las centrales nucleares: Diseno. Requisitos de seguridad especificos

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-04-15

This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

IAEA Mission Sees Safety Commitment at Finland's New Olkiluoto Reactor Before Planned Start in December

International Nuclear Information System (INIS)

2018-01-01

implementation of its foreign material exclusion programme, aimed at preventing potential damage from the introduction of residue, dirt, debris and other substances. • The plant should enhance its fire protection and prevention arrangements.

Injection safety knowledge and practices among clinical health care ...

African Journals Online (AJOL)

Injection safety is therefore critical in preventing occupational exposure and infection from blood borne pathogens, hence prevention is a vital part of any ... safety among clinical healthcare workers at the Garissa Provincial General Hospital.

Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition); Seguridad radiologica en la radiografia industrial

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-12-15

This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

Safety in Schools: An Integral Approach

Science.gov (United States)

Gairin, Joaquin; Castro, Diego

2011-01-01

The present paper summarizes a research project into integral safety in schools. The aims of this particular research are, firstly, to evaluate the degree of integral safety in schools, secondly, to propose means for improving prevention and integral safety systems and thirdly, to identify the characteristics of safety culture. The field work was…

The rewards of road safety

CERN Multimedia

Anaïs Schaeffer

2012-01-01

In May, the HSE Unit launched a cycling safety campaign at CERN over three days during which members of the Unit and representatives of the Swiss Office for Accident Prevention and the Touring Club Suisse reminded people of the basic safety rules to which they should adhere when riding a bike. A competition was held to encourage people to be self-critical and to highlight best practice.    On 14 June, a month and 273 participants later, 40 lucky contestants received winners' prizes in a low-key reception at Restaurant 2. Among the prizes were "safety packs" containing a fluorescent jacket, arm-bands and a water-bottle, cycle helmets and two brand new bikes. More proof, if any were needed, that safety and prevention form a winning combination!  

Workshop on development and view on digital safety system of KNICS

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-05-15

The contents of this workshop are vision of KNICS, introduction of development of safety system of KNICS, development situation of safety class of PLC, view of software for safety-critical system in PLC, RTOS development by shaping, quality assurance and attestation of PLC, development situation of nuclear reactor system and development situation of ESF-CCS.

Workshop on development and view on digital safety system of KNICS

International Nuclear Information System (INIS)

2006-05-01

The contents of this workshop are vision of KNICS, introduction of development of safety system of KNICS, development situation of safety class of PLC, view of software for safety-critical system in PLC, RTOS development by shaping, quality assurance and attestation of PLC, development situation of nuclear reactor system and development situation of ESF-CCS

Industrial Safety and Accidents Prevention

International Nuclear Information System (INIS)

Sajjad Akbar

2006-01-01

Accident Hazards, dangers, losses and risk are what we would to like to eliminate, minimize or avoid in industry. Modern industries have created many opportunities for these against which man's primitive instincts offer no protection. In today's complex industrial environment safety has become major preoccupation, especially after the realization that there is a clear economic incentive to do so. Industrial hazards may cause by human error or by physical or mechanical malfunction, it is very often possible to eliminate the worst consequences of human error by engineering modification. But the modification also needs checking very thoroughly to ensue that it has not introduced some new and unsuspected hazard. (author)

NIKHEF-K safety report 1982

International Nuclear Information System (INIS)

1983-12-01

In this safety report, general information is offered about the safety policy at the NIKHEF-K institute Amsterdam. Costs, prevention, training courses and inspection related to (radiation) safety are briefly discussed. Small accidents are reported. Some measurements have been carried out, but no measurable increase of radiation doses have been found. (Auth.)

The National School Safety Framework: A framework for preventing ...

African Journals Online (AJOL)

The National School Safety Framework (NSSF) – approved by the Minister of Education in April 2015 - is located within a range of international and national laws and policies that recognise the safety of learners and educators as a prerequisite for quality learning and teaching at school. The framework affirms the ...

Safety Culture to Prevent Infection in Normal Birth Care by Village Midwives Ateast Lombok Nusa Tenggara Barat

OpenAIRE

Bartini, Istri

2015-01-01

Background: Normal birth care is one of midwife's competence within the most of risks to both women and midwife. Limited of health facilities and social culture are major problem of midwifery care. In fact, infection cases have been occurring and become a significant cause in maternal death. At East Lombok most of 93,33% birth was provided by midwife. It was a tricky to explain that midwife does not work as well.Aim: to describe safety culture to prevent infection during normal birth care at ...

Interventions to prevent injuries in construction workers.

Science.gov (United States)

van der Molen, Henk F; Basnet, Prativa; Hoonakker, Peter Lt; Lehtola, Marika M; Lappalainen, Jorma; Frings-Dresen, Monique Hw; Haslam, Roger; Verbeek, Jos H

2018-02-05

Construction workers are frequently exposed to various types of injury-inducing hazards. There are a number of injury prevention interventions, yet their effectiveness is uncertain. To assess the effects of interventions for preventing injuries in construction workers. We searched the Cochrane Injuries Group's specialised register, CENTRAL (issue 3), MEDLINE, Embase and PsycINFO up to April 2017. The searches were not restricted by language or publication status. We also handsearched the reference lists of relevant papers and reviews. Randomised controlled trials, controlled before-after (CBA) studies and interrupted time-series (ITS) of all types of interventions for preventing fatal and non-fatal injuries among workers at construction sites. Two review authors independently selected studies, extracted data and assessed their risk of bias. For ITS studies, we re-analysed the studies and used an initial effect, measured as the change in injury rate in the year after the intervention, as well as a sustained effect, measured as the change in time trend before and after the intervention. Seventeen studies (14 ITS and 3 CBA studies) met the inclusion criteria in this updated version of the review. The ITS studies evaluated the effects of: introducing or changing regulations that laid down safety and health requirements for the construction sites (nine studies), a safety campaign (two studies), a drug-free workplace programme (one study), a training programme (one study), and safety inspections (one study) on fatal and non-fatal occupational injuries. One CBA study evaluated the introduction of occupational health services such as risk assessment and health surveillance, one evaluated a training programme and one evaluated the effect of a subsidy for upgrading to safer scaffoldings. The overall risk of bias of most of the included studies was high, as it was uncertain for the ITS studies whether the intervention was independent from other changes and thus could be

A Methodology for Validating Safety Heuristics Using Clinical Simulations: Identifying and Preventing Possible Technology-Induced Errors Related to Using Health Information Systems

Science.gov (United States)

Borycki, Elizabeth; Kushniruk, Andre; Carvalho, Christopher

2013-01-01

Internationally, health information systems (HIS) safety has emerged as a significant concern for governments. Recently, research has emerged that has documented the ability of HIS to be implicated in the harm and death of patients. Researchers have attempted to develop methods that can be used to prevent or reduce technology-induced errors. Some researchers are developing methods that can be employed prior to systems release. These methods include the development of safety heuristics and clinical simulations. In this paper, we outline our methodology for developing safety heuristics specific to identifying the features or functions of a HIS user interface design that may lead to technology-induced errors. We follow this with a description of a methodological approach to validate these heuristics using clinical simulations. PMID:23606902

Operating room fire prevention: creating an electrosurgical unit fire safety device.

Science.gov (United States)

Culp, William C; Kimbrough, Bradly A; Luna, Sarah; Maguddayao, Aris J

2014-08-01

To reduce the incidence of surgical fires. Operating room fires represent a potentially life-threatening hazard and are triggered by the electrosurgical unit (ESU) pencil. Carbon dioxide is a fire suppressant and is a routinely used medical gas. We hypothesize that a shroud of protective carbon dioxide covering the tip of the ESU pencil displaces oxygen, thereby preventing fire ignition. Using 3-dimensional modeling techniques, a polymer sleeve was created and attached to an ESU pencil. This sleeve was connected to a carbon dioxide source and directed the gas through multiple precisely angled ports, generating a cone of fire-suppressive carbon dioxide surrounding the active pencil tip. This device was evaluated in a flammability test chamber containing 21%, 50%, and 100% oxygen with sustained ESU activation. The sleeve was tested with and without carbon dioxide (control) until a fuel was ignited or 30 seconds elapsed. Time to ignition was measured by high-speed videography. Fires were ignited with each control trial (15/15 trials). The control group median ± SD ignition time in 21% oxygen was 3.0 ± 2.4 seconds, in 50% oxygen was 0.1 ± 1.8 seconds, and in 100% oxygen was 0.03 ± 0.1 seconds. No fire was observed when the fire safety device was used in all concentrations of oxygen (0/15 trials; P fire ignition was 76% to 100%. A sleeve creating a cone of protective carbon dioxide gas enshrouding the sparks from an ESU pencil effectively prevents fire in a high-flammability model. Clinical application of this device may reduce the incidence of operating room fires.

THE INTRODUCTION OF THE METHODOLOGY TO IMPROVE ROAD SAFETY

Directory of Open Access Journals (Sweden)

D. V. Kapsky

2013-01-01

Full Text Available Recommendations for improving the road safety and quality of road traffic controlled junctions(crossings on individual parameters of traffic light control, improvement of traffic light control by optimizing the length of the transition interval in the traffic light cycle, increase awareness and early warning drivers about the upcoming change traffic lights division of transport and pedestrian traffic, road conditions , transportation planning and technical aids of road  traffic, as well as recommendations for the use of the hump in the settlements, etc.

Fire safety assessment of tunnel structures

DEFF Research Database (Denmark)

Gkoumas, Konstantinos; Giuliani, Luisa; Petrini, Francesco

2011-01-01

.g. structural and non structural, organizational, human behavior). This is even more truth for the fire safety design of such structures. Fire safety in tunnels is challenging because of the particular environment, bearing in mind also that a fire can occur in different phases of the tunnel’s lifecycle. Plans...... for upgrading fire safety provisions and tunnel management are also important for existing tunnels. In this study, following a brief introduction of issues regarding the above mentioned aspects, the structural performance of a steel rib for a tunnel infrastructure subject to fire is assessed by means...

Human Factors and Safety Culture in Maritime Safety (revised

Directory of Open Access Journals (Sweden)

Heinz Peter Berg

2013-09-01

Full Text Available As in every industry at risk, the human and organizational factors constitute the main stakes for maritime safety. Furthermore, several events at sea have been used to develop appropriate risk models. The investigation on maritime accidents is, nowadays, a very important tool to identify the problems related to human factor and can support accident prevention and the improvement of maritime safety. Part of this investigation should in future also be near misses. Operation of ships is full of regulations, instructions and guidelines also addressing human factors and safety culture to enhance safety. However, even though the roots of a safety culture have been established, there are still serious barriers to the breakthrough of the safety management. One of the most common deficiencies in the case of maritime transport is the respective monitoring and documentation usually lacking of adequacy and excellence. Nonetheless, the maritime area can be exemplified from other industries where activities are ongoing to foster and enhance safety culture.

EC6 safety design improvements

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Lee, A.G.; Soulard, M. [Candu Energy Inc., Mississauga, ON (Canada)

2014-07-01

The Enhanced CANDU 6 (EC6) builds on the proven high performance design such as the Qinshan CANDU 6 reactor, and has made improvements to safety, operational performance, and has incorporated extensive operational feedback. Completion of all three phases of the pre-licensing design review by the Canadian Regulator - the Canadian Nuclear Safety Commission has provided a higher level of assurance that the EC6 reference design has taken modern regulatory requirements and expectations into account and further confirmed that there are no fundamental barriers to licensing the EC6 design in Canada. The EC6 design is based on the defence-in-depth principles in INSAG-10 and provides further safety features that address the lessons learned from Fukushima. With these safety features, the EC6 design has strengthened accident prevention as the first priority in the defence-in-depth strategy, as outlined in INSAG-10. As well, the EC6 design has incorporated further mitigation measures to provide additional protection of the public and the environment if the preventive measures fail. The EC6 design has an appropriate combination of inherent, passive safety characteristics, engineered features and administrative safety measures to effectively prevent and mitigate severe accident progressions. A strong contributor to the robustness and redundancy of CANDU design is the two-group separation philosophy. This ensures a high degree of independence between safety systems as well as physical separation and functional independence in how fundamental safety functions are provided. This paper will describe the following safety features based on the application of defence-in-depth and design approach to prevent beyond design basis events progressing to severe accidents and to mitigate the consequences if it occurs: Improved steam generator heat sink via a more reliable emergency heat removal system; Increased time before manual field actions are required via enhanced capacity of

41 CFR 128-1.8009 - Review of Seismic Safety Program.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Review of Seismic Safety Program. 128-1.8009 Section 128-1.8009 Public Contracts and Property Management Federal Property Management Regulations System (Continued) DEPARTMENT OF JUSTICE 1-INTRODUCTION 1.80-Seismic Safety Program...

Fundamental Safety Principles

International Nuclear Information System (INIS)

Abdelmalik, W.E.Y.

2011-01-01

This work presents a summary of the IAEA Safety Standards Series publication No. SF-1 entitled F UDAMENTAL Safety PRINCIPLES p ublished on 2006. This publication states the fundamental safety objective and ten associated safety principles, and briefly describes their intent and purposes. Safety measures and security measures have in common the aim of protecting human life and health and the environment. These safety principles are: 1) Responsibility for safety, 2) Role of the government, 3) Leadership and management for safety, 4) Justification of facilities and activities, 5) Optimization of protection, 6) Limitation of risks to individuals, 7) Protection of present and future generations, 8) Prevention of accidents, 9)Emergency preparedness and response and 10) Protective action to reduce existing or unregulated radiation risks. The safety principles concern the security of facilities and activities to the extent that they apply to measures that contribute to both safety and security. Safety measures and security measures must be designed and implemented in an integrated manner so that security measures do not compromise safety and safety measures do not compromise security.

“The Internet is a Mask”: High School Students' Suggestions for Preventing Cyberbullying

Science.gov (United States)

Parris, Leandra N.; Varjas, Kris; Meyers, Joel

2014-01-01

Introduction: Interactions through technology have an important impact on today's youth. While some of these interactions are positive, there are concerns regarding students engaging in negative interactions like cyberbullying behaviors and the negative impact these behaviors have on others. The purpose of the current study was to explore participant suggestions for both students and adults for preventing cyberbullying incidents. Methods: Forty high school students participated in individual, semi-structured interviews. Participant experiences and perceptions were coded using constant comparative methods to illustrate ways in which students and adults may prevent cyberbullying from occurring within their school and community. Results: Students reported that peers would benefit from increasing online security, as well as becoming more aware of their cyber-surroundings. Regarding adult-provided prevention services, participants often discussed that there is little adults can do to reduce cyberbullying. Reasons included the difficulties in restricting online behaviors or providing effective consequences. However, some students did discuss the use of in-school curricula while suggesting that adults blame people rather than technology as potential ways to prevent cyberbullying. Conclusion: Findings from the current study indicate some potential ways to improve adult efforts to prevent cyberbullying. These strategies include parent/teacher training in technology and cyberbullying, interventions focused more on student behavior than technology restriction, and helping students increase their online safety and awareness. PMID:25157306

Watershed safety and quality control by safety threshold method

Science.gov (United States)

Da-Wei Tsai, David; Mengjung Chou, Caroline; Ramaraj, Rameshprabu; Liu, Wen-Cheng; Honglay Chen, Paris

2014-05-01

Taiwan was warned as one of the most dangerous countries by IPCC and the World Bank. In such an exceptional and perilous island, we would like to launch the strategic research of land-use management on the catastrophe prevention and environmental protection. This study used the watershed management by "Safety Threshold Method" to restore and to prevent the disasters and pollution on island. For the deluge prevention, this study applied the restoration strategy to reduce total runoff which was equilibrium to 59.4% of the infiltration each year. For the sediment management, safety threshold management could reduce the sediment below the equilibrium of the natural sediment cycle. In the water quality issues, the best strategies exhibited the significant total load reductions of 10% in carbon (BOD5), 15% in nitrogen (nitrate) and 9% in phosphorus (TP). We found out the water quality could meet the BOD target by the 50% peak reduction with management. All the simulations demonstrated the safety threshold method was helpful to control the loadings within the safe range of disasters and environmental quality. Moreover, from the historical data of whole island, the past deforestation policy and the mistake economic projects were the prime culprits. Consequently, this study showed a practical method to manage both the disasters and pollution in a watershed scale by the land-use management.

Nonfatal road traffic injuries: can road safety campaigns prevent hazardous behavior? An Italian experience.

Science.gov (United States)

Zampetti, R; Messina, G; Quercioli, C; Vencia, F; Genco, L; Di Bartolomeo, L; Nante, N

2013-01-01

Road traffic injuries are a widespread problem and are very difficult to prevent. The purpose of this study was to verify whether intensive versus basic road safety education programs are associated with different incidence and severity of nonfatal road injuries. The study had an ecological design and involved Local Health Authority One (LHA1) in Salerno, Italy, which includes 20 municipalities. Data on nonfatal road injuries occurring in the periods June to August 2003 and June to August 2008 were obtained from trained operators through the information system of the emergency department. All 20 municipalities received a basic community road safety education program (publicity campaign using bill-posting, brochures, mass media communication with press conferences, articles in local papers, radio and television interviews, and a dedicated LHA1 web site), and 12 municipalities also received an intensive education campaign (in secondary schools, community conferences, and activities organized by police and firefighters). The incidence and severity of nonfatal road traffic injuries were compared between June to August 2003 (before the campaign) and June to August 2008. The total number of injuries in all 20 municipalities in 2003 and 2008 was 907 and 755, respectively. The incidence of injuries decreased in the study period both in the 8 municipalities where only the basic campaign was run (difference in incidence = -0.4; P = .053) and in the 12 municipalities where the intensive campaign was implemented (difference in incidence = -0.5; P road safety education. This does not mean that such campaigns are useless (they are important to raise awareness) but that they should be supplemented with complementary activities in order to be really effective.

Safety and health in forest harvesting operations. Diagnosis and preventive actions. A review

Energy Technology Data Exchange (ETDEWEB)

Albizu-Urionabarrenetxea, P. M.; Tolosana-Esteban, E.; Roman-Jordan, E.

2013-07-01

Aim of study: to review the present state of the art in relation to the main labour risks and the most relevant results of recent studies evaluating the safety and health conditions of the forest harvesting work and better ways to reduce accidents. Area of study: It focuses mainly on developed Countries, where the general concern about work risks prevention, together with the complex idiosyncrasy of forest work in forest harvesting operations, has led to a growing interest from the forest scientific and technical community. Material and Methods: The main bibliographic and Internet references have been identified using common reference analysis tools. Their conclusions and recommendations have been comprehensively summarized. Main results: Collection of the principal references and their most important conclusions relating to the main accident risk factors, their causes and consequences, the means used towards their prevention, both instrumental as well as in the aspects of training and business management, besides the influence of the growing mechanization of logging operations on those risks. Research highlights: Accident risk is higher in forest harvesting than in most other work sectors, and the main risk factors such as experience, age, seasonality, training, protective equipment, mechanization degree, etc. have been identified and studied. The paper summarizes some relevant results, one of the principal being that the proper entrepreneurial risk management is a key factor leading to the success in minimizing labour risks. (Author)

Nordic studies in reactor safety

International Nuclear Information System (INIS)

Pershagen, N.

1993-01-01

The Nordic Nuclear Safety Research Programme SIK programme in reactor safety is part of a major joint Nordic research effort in nuclear safety. The report summarizes the achievements of the SIK programme, which was carried out during 1990-1993 in collaboration between Nordic nuclear utilities, safety authorities, and research institutes. Three main projects were successfully completed dealing with: 1) development and application of a living PSA concept for monitoring the risk of core damage, and of safety indicators for early warning of possible safety problems; 2) review and intercomparison of severe accident codes, case studies of potential core melt accidents in nordic reactors, development of chemical models for the MAAP code, and outline of a system for computerized accident management support; 3) compilation of information about design and safety features of neighbouring reactors in Germany, Lithuania and Russia, and for naval reactors and nuclear submarines. The report reviews the state-of-the-art in each subject matter as an introduction to the individual project summaries. The main findings of each project are highlighted. The report also contains an overview of reactor safety research in the Nordic countries and a summary of fundamental reactor safety principles. (au) (69 refs.)

Evaluation of safety practices and performance in a brewery industry ...

African Journals Online (AJOL)

Michael Horsfall

prevented in the period of the safety programme which translates to an average of 19.45 per year. The safety programme ... due to “weak safeguards against occupational and .... outputs within such a system. In this ..... Journal of Disaster Prevention and Management: ... Duignan, T. (2003), “Good health and safety is good.

Fit, Healthy, and Ready To Learn: A School Health Policy Guide. Part II: Policies To Promote Sun Safety and Prevent Skin Cancer.

Science.gov (United States)

Fraser, Katherine

This publication is a supplementary chapter to "Fit, Healthy, and Ready to Learn: A School Health Policy Guide; Part I: General School Health Policies, Physical Activity, Healthy Eating, and Tobacco-Use Prevention." It discusses various aspects of a complete school policy and plan to promote sun safety. The first section "Purpose…

Prevention: Exercise

Medline Plus

Full Text Available ... Training for the Elderly Other Back Pack Safety Pregnancy and Back Pain Preventing Osteoporosis Back Pain Basics ... increases your back pain after five repetitions, or causes acute pain, you should stop doing it. Transverse ...

Prevention: Exercise

Medline Plus

Full Text Available ... 10 Tips for a Healthy Back Smoking Weight Patient Safety Exercise Strengthening Strengthen Your Core! Stretching/Flexibility ... Pain Preventing Osteoporosis Back Pain Basics Book RESOURCES Patient Information Feature Articles Patient Q&A Success Stories ...

Introduction and Overview: Prevention Services--From Optimistic Promise to Widespread, Effective Practice.

Science.gov (United States)

Weissberg, Roger P.; Kuster, Carol Bartels; Gullotta, Thomas P.

This opening chapter provides an overview of the book, "Healthy Children 2010: Establishing Preventive Services." The article describes the purpose of the work, which is to provide strategies to establish and successfully implement effective prevention services in key socializing settings that powerfully affect the growth an development…

Occupational therapist care in the introduction of Alternative Communication features in hospital environment

OpenAIRE

Janaína Santos Nascimento; Juliana Mannini; Miryam Bonadiu Pelosi; Mariana Mapelli de Paiva

2017-01-01

Introduction: Alternative and Extended Communication (CAA) is an area of assistive technology, and its introduction in the hospital environment has contributed decisively to the care and integration of patients with speech or writing difficulties. However, in order for the use of CAA resources to be effective in this environment, actions are essential to prevent and control Hospital Infections (HI). Objective: To describe the strategies related to the control of HI, used for the i...

The introduction of the safety of molten salt reactor

International Nuclear Information System (INIS)

Zuo Jiaxu; Zhang Chunming

2011-01-01

This paper introduces the generation TV Nuclear Energy Systems and molten salt reactor which is the only fluid fuel reactor in the Gen-TV. Safety features and attributes of MSR are described. The supply of fuel and the minimum of waste are described. The clean molten salt in the secondary heat transport system transfers the heat from the primary heat exchanger to a high-temperature Brayton cycle that converts the heat to electricity. With the Brayton cycle, the thermal efficiency of the system will be improved. Base on the MSR, the thorium-uranium fuel cycle is also introduced. (authors)

A new era of safety at CERN

CERN Multimedia

CERN Bulletin

2014-01-01

CERN is modernising its safety policy and organisational structure in matters of Safety with the introduction of new reference documents that have come into force on 29 September. These texts adapt the Organization’s safety policy to take account of how the Laboratory has evolved and to include best practice in Safety matters.   Safety is a priority at CERN, so it’s no coincidence that the Organization’s anniversary has been chosen as the time to launch a modernised approach to its Safety policy and how Safety matters are organised. On the day of CERN’s 60th anniversary, the SAPOCO 42 document, which covered both policy and organisational aspects, was replaced by a more concise general policy statement. The organisational structure and responsibilities in matters of Safety are now set out in a Safety Regulation, that is supplemented by subsidiary documents. Together these documents will replace the corresponding parts of the former SAPOCO 42 as well as Saf...

Guide to Pollution Prevention in Your Community.

Science.gov (United States)

Luppino, Tony; Gilbert, Reg

The purpose of this guide is to help citizen advocates create and improve the environmental practices of industry and government in the Great Lakes Basin. The practices advocated focus on pollution prevention instead of relying solely on pollution control. An introduction examines the larger issues of pollution prevention and zero discharge as the…

Safety of nuclear power plants: Design. Safety requirements

International Nuclear Information System (INIS)

2000-01-01

other reactor types, including innovative developments in future systems, some of the requirements may not be applicable, or may need some judgment in their interpretation. Various Safety Guides will provide guidance in the interpretation and implementation of these requirements. This publication is intended for use by organizations designing, manufacturing, constructing and operating nuclear power plants as well as by regulatory bodies. This publication establishes design requirements for structures, systems and components important to safety that must be met for safe operation of a nuclear power plant, and for preventing or mitigating the consequences of events that could jeopardize safety. It also establishes requirements for a comprehensive safety assessment, which is carried out in order to identify the potential hazards that may arise from the operation of the plant, under the various plant states (operational states and accident conditions). The safety assessment process includes the complementary techniques of deterministic safety analysis and probabilistic safety analysis. These analyses necessitate consideration of postulated initiating events (PlEs), which include many factors that, singly or in combination, may affect safety and which may: originate in the operation of the nuclear power plant itself; be caused by human action; be directly related to the nuclear power plant and its environment. This publication also addresses events that are very unlikely to occur, such as severe accidents that may result in major radioactive releases, and for which it may be appropriate and practicable to provide preventive or mitigatory features in the design. This publication does not address: external natural or human induced events that are extremely unlikely (such as the impact of a meteorite or an artificial satellite); conventional industrial accidents that under no circumstances could affect the safety of the nuclear power plant; or non-radiological effects arising

Safety of nuclear power plants: Design. Safety requirements

International Nuclear Information System (INIS)

2004-01-01

other reactor types, including innovative developments in future systems, some of the requirements may not be applicable, or may need some judgment in their interpretation. Various Safety Guides will provide guidance in the interpretation and implementation of these requirements. This publication is intended for use by organizations designing, manufacturing, constructing and operating nuclear power plants as well as by regulatory bodies. This publication establishes design requirements for structures, systems and components important to safety that must be met for safe operation of a nuclear power plant, and for preventing or mitigating the consequences of events that could jeopardize safety. It also establishes requirements for a comprehensive safety assessment, which is carried out in order to identify the potential hazards that may arise from the operation of the plant, under the various plant states (operational states and accident conditions). The safety assessment process includes the complementary techniques of deterministic safety analysis and probabilistic safety analysis. These analyses necessitate consideration of postulated initiating events (PlEs), which include many factors that, singly or in combination, may affect safety and which may: originate in the operation of the nuclear power plant itself. Be caused by human action. Be directly related to the nuclear power plant and its environment. This publication also addresses events that are very unlikely to occur, such as severe accidents that may result in major radioactive releases, and for which it may be appropriate and practicable to provide preventive or mitigatory features in the design. This publication does not address: external natural or human induced events that are extremely unlikely (such as the impact of a meteorite or an artificial satellite). Conventional industrial accidents that under no circumstances could affect the safety of the nuclear power plant. Or non-radiological effects arising

Risk-informed, performance-based safety-security interface

International Nuclear Information System (INIS)

Mrowca, B.; Eltawila, F.

2012-01-01

Safety-security interface is a term that is used as part of the commercial nuclear power security framework to promote coordination of the many potentially adverse interactions between plant security and plant safety. Its object is to prevent the compromise of either. It is also used to describe the concept of building security into a plant's design similar to the long standing practices used for safety therefore reducing the complexity of the operational security while maintaining or enhancing overall security. With this in mind, the concept of safety-security interface, when fully implemented, can influence a plant's design, operation and maintenance. It brings the approach use for plant security to one that is similar to that used for safety. Also, as with safety, the application of risk-informed techniques to fully implement and integrate safety and security is important. Just as designers and operators have applied these techniques to enhance and focus safety, these same techniques can be applied to security to not only enhance and focus the security but also to aid in the implementation of effective techniques to address the safety-security interfaces. Implementing this safety-security concept early within the design process can prevent or reduce security vulnerabilities through low cost solutions that often become difficult and expensive to retrofit later in the design and/or post construction period. These security considerations address many of the same issues as safety in ensuring that the response of equipment and plant personnel are adequate. That is, both safety and security are focused on reaching safe shutdown and preventing radiological release. However, the initiation of challenges and the progression of actions in response these challenges and even the definitions of safe shutdown can be considerably different. This paper explores the techniques and limitations that are employed to fully implement a risk-informed, safety-security interface

A cross-sectional survey to assess community attitudes to introduction of Human papillomavirus vaccine.

Science.gov (United States)

Marshall, Helen; Ryan, Philip; Roberton, Don; Baghurst, Peter

2007-06-01

A vaccine to prevent human papilloma virus (HPV) infection has been licensed recently in the United States of America and Australia. The aim of this study was to assess community attitudes to the introduction of HPV vaccine in the State of South Australia. A cross-sectional survey was conducted by computer-aided telephone interviews in February 2006. The survey assessed adult and parental attitudes to the introduction of HPV vaccine to provide protection against a sexually transmitted disease caused by HPV and against cervical cancer. Two thousand interviews were conducted in metropolitan and rural households. Two per cent of respondents knew that persistent HPV infection caused cervical cancer and a further 7% were aware that the cause was viral. The majority of adults interviewed (83%) considered that both men and women should receive HPV vaccine and 77% of parents agreed that they would have their child/children immunised. Parents were mainly concerned about possible side effects of the vaccine (66%), with only 0.2% being concerned about discussing a sexually transmitted disease with their children and 5% being concerned that use of the vaccine may lead to promiscuity. Our findings suggest that public health education campaigns for HPV vaccination will find a majority of parents receptive to their children being vaccinated, but attention must be paid to appropriate explanation about HPV infection as the cause of cervical cancer and education about the safety of the HPV vaccine.

Predicting and preventing organizational failure: learning, stability and safety culture

International Nuclear Information System (INIS)

Duffey, R.B.

2009-01-01

The physical definition of 'safety culture' is the creation of an organizational and operational structure that places unending emphasis on safety at every level. We propose and prefer the use of the term and the objective of sustaining a 'Learning Environment', where mistakes, outcomes and errors are used as learning vehicles to improve, and we can now define why that is true. Therefore we can manage and quantify safety effectively tracking and analyzing outcomes, using the trends to guide our needed organizational behaviors. (author)

Industrial safety in power plants

International Nuclear Information System (INIS)

1987-01-01

The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

Accidents Preventive Practice for High-Rise Construction

Directory of Open Access Journals (Sweden)

Goh Kai Chen

2016-01-01

Full Text Available The demand of high-rise projects continues to grow due to the reducing of usable land area in Klang Valley, Malaysia. The rapidly development of high-rise projects has leaded to the rise of fatalities and accidents. An accident that happened in a construction site can cause serious physical injury. The accidents such as people falling from height and struck by falling object were the most frequent accidents happened in Malaysian construction industry. The continuous growth of high-rise buildings indicates that there is a need of an effective safety and health management. Hence, this research aims to identify the causes of accidents and the ways to prevent accidents that occur at high-rise building construction site. Qualitative method was employed in this research. Interview surveying with safety officers who are involved in highrise building project in Kuala Lumpur were conducted in this research. Accidents were caused by man-made factors, environment factors or machinery factors. The accidents prevention methods were provide sufficient Personal Protective Equipment (PPE, have a good housekeeping, execute safety inspection, provide safety training and execute accidents investigation. In the meanwhile, interviewees have suggested the new prevention methods that were develop a proper site layout planning and de-merit and merit system among sub-contractors, suppliers and even employees regarding safety at workplace matters. This research helps in explaining the causes of accidents and identifying area where prevention action should be implemented, so that workers and top management will increase awareness in preventing site accidents.

Introduction

DEFF Research Database (Denmark)

Kørnøv, Lone; Lund, Henrik; Remmen, Arne

2004-01-01

The chapter gives an introduction to the book "Environmental planning and management : tools for a sustainable development".......The chapter gives an introduction to the book "Environmental planning and management : tools for a sustainable development"....

Preventing accidents

Science.gov (United States)

2005-08-01

As the most effective strategy for improving safety is to prevent accidents from occurring at all, the Volpe Center applies a broad range of research techniques and capabilities to determine causes and consequences of accidents and to identify, asses...

Global bike share: What the data tells us about road safety

NARCIS (Netherlands)

Fishman, E.; Schepers, J.P.

Introduction Bike share has emerged as a rapidly growing mode of transport in over 800 cities globally, up from just a handful in the 1990s. Some analysts had forecast a rise in the number of bicycle crashes after the introduction of bike share, but empirical research on bike share safety is rare.

Second national report of Brazil for the nuclear safety convention - introduction

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

This document was prepared for fulfilling the Brazilian obligations under the Convention on Nuclear Safety. Chapter 1 presents some historical aspects of the Brazilian nuclear policy, targets to be attained for increasing the nuclear energy contribution for the national production of electric energy.

Second national report of Brazil for the nuclear safety convention - introduction

International Nuclear Information System (INIS)

2001-01-01

This document was prepared for fulfilling the Brazilian obligations under the Convention on Nuclear Safety. Chapter 1 presents some historical aspects of the Brazilian nuclear policy, targets to be attained for increasing the nuclear energy contribution for the national production of electric energy

Introduction: Situation Awareness, Systems of Systems, and Maritime Safety and Security

NARCIS (Netherlands)

Tretmans, G.J.; Laar, P.J.L.J. van de

2013-01-01

This book presents and discusses various challenges and solutions for developing systems-of-systems for attaining situation awareness, with applications in the domain of maritime safety and security. This chapter introduces the book, describes the Dutch research project Poseidon from which it

Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas

CERN Document Server

International Organization for Standardization. Geneva

2002-01-01

This International Standard establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. This part of ISO 3864 is applicable to workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.

Safety in the Utilization and Modification of Research Reactors. Specific Safety Guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-15

This Safety Guide is a revision of Safety Series No. 35-G2 on safety in the utilization and modification of research reactors. It provides recommendations on meeting the requirements for the categorization, safety assessment and approval of research reactor experiments and modification projects. Specific safety considerations in different phases of utilization and modification projects are covered, including the pre-implementation, implementation and post-implementation phases. Guidance is also provided on the operational safety of experiments, including in the handling, dismantling, post-irradiation examination and disposal of experimental devices. Examples of the application of the safety categorization process for experiments and modification projects and of the content of the safety analysis report for an experiment are also provided. Contents: 1. Introduction; 2. Management system for the utilization and modification of a research reactor; 3. Categorization, safety assessment and approval of an experiment or modification; 4. Safety considerations for the design of an experiment or modification; 5. Pre-implementation phase of a modification or utilization project; 6. Implementation phase of a modification or utilization project; 7. Post-implementation phase of a utilization or modification project; 8. Operational safety of experiments at a research reactor; 9. Safety considerations in the handling, dismantling, post-irradiation examination and disposal of experimental devices; 10. Safety aspects of out-of-reactor-core installations; Annex I: Example of a checklist for the categorization of an experiment or modification at a research reactor; Annex II: Example of the content of the safety analysis report for an experiment at a research reactor; Annex III: Examples of reasons for a modification at a research reactor.

Safety in the Utilization and Modification of Research Reactors. Specific Safety Guide

International Nuclear Information System (INIS)

2012-01-01

This Safety Guide is a revision of Safety Series No. 35-G2 on safety in the utilization and modification of research reactors. It provides recommendations on meeting the requirements for the categorization, safety assessment and approval of research reactor experiments and modification projects. Specific safety considerations in different phases of utilization and modification projects are covered, including the pre-implementation, implementation and post-implementation phases. Guidance is also provided on the operational safety of experiments, including in the handling, dismantling, post-irradiation examination and disposal of experimental devices. Examples of the application of the safety categorization process for experiments and modification projects and of the content of the safety analysis report for an experiment are also provided. Contents: 1. Introduction; 2. Management system for the utilization and modification of a research reactor; 3. Categorization, safety assessment and approval of an experiment or modification; 4. Safety considerations for the design of an experiment or modification; 5. Pre-implementation phase of a modification or utilization project; 6. Implementation phase of a modification or utilization project; 7. Post-implementation phase of a utilization or modification project; 8. Operational safety of experiments at a research reactor; 9. Safety considerations in the handling, dismantling, post-irradiation examination and disposal of experimental devices; 10. Safety aspects of out-of-reactor-core installations; Annex I: Example of a checklist for the categorization of an experiment or modification at a research reactor; Annex II: Example of the content of the safety analysis report for an experiment at a research reactor; Annex III: Examples of reasons for a modification at a research reactor.

Efficacy and safety of intermittent preventive treatment with sulfadoxine-pyrimethamine for malaria in African infants: a pooled analysis of six randomised, placebo-controlled trials

NARCIS (Netherlands)

Aponte, John J.; Schellenberg, David; Egan, Andrea; Breckenridge, Alasdair; Carneiro, Ilona; Critchley, Julia; Danquah, Ina; Dodoo, Alexander; Kobbe, Robin; Lell, Bertrand; May, Jürgen; Premji, Zul; Sanz, Sergi; Sevene, Esperanza; Soulaymani-Becheikh, Rachida; Winstanley, Peter; Adjei, Samuel; Anemana, Sylvester; Chandramohan, Daniel; Issifou, Saadou; Mockenhaupt, Frank; Owusu-Agyei, Seth; Greenwood, Brian; Grobusch, Martin P.; Kremsner, Peter G.; Macete, Eusebio; Mshinda, Hassan; Newman, Robert D.; Slutsker, Laurence; Tanner, Marcel; Alonso, Pedro; Menendez, Clara

2009-01-01

BACKGROUND: Intermittent preventive treatment (IPT) is a promising strategy for malaria control in infants. We undertook a pooled analysis of the safety and efficacy of IPT in infants (IPTi) with sulfadoxine-pyrimethamine in Africa. METHODS: We pooled data from six double-blind, randomised,

Review of light--water reactor safety studies. Volume 3 of health and safety impacts of nuclear, geothermal, and fossil-fuel electric generation in California

International Nuclear Information System (INIS)

Nero, A.V.; Farnaam, M.R.K.

1977-01-01

This report summarizes and compares important studies of light-water nuclear reactor safety, emphasizing the Nuclear Regulatory Commission's Reactor Safety Study, work on risk assessment funded by the Electric Power Research Institute, and the Report of the American Physical Society study group on light-water reactor safety. These reports treat risk assessment for nuclear power plants and provide an introduction to the basic issues in reactor safety and the needs of the reactor safety research program. Earlier studies are treated more briefly. The report includes comments on the Reactor Safety Study. The manner in which these studies may be used and alterations which would increase their utility are discussed

Relapse Prevention: An Introduction to Marlatt’s Cognitive – Behavior Model

Directory of Open Access Journals (Sweden)

Farshad Nemati

2002-10-01

Full Text Available High rate of relapse after apparently successful treatment is a common problem facing with most approaches to treatment of drug dependency. This has led to the development of a variety of strategies for relapse prevention. Among these, Marlatt’s cognitive – behavioural model has received a good deal of attention. It is based on two major axes: Identification of warning sings and development of necessary skills for coping with risk situations. In fact, client’s perception relating to their abilities to cope with high - risk situations can lead to lapse. Relapes is a function of client’s reaction to this initial lapes.Since formal training for addiction counsellors typically includes instruction on Marlatt’s relapes taxonomy and intervention strategies have been designed based on his classification systems of high – risk stimuli, it is nececsary for addiction counsellors to become familiar with this system. This paper presents an overview of Marlatts taxonomy of high – risk situations for relapse and his approach to relapse prevention. Special attention is given to definition of relapse, stages of relaps and relapse prevention strategies.

Computer technologies for industrial risk prevention and emergency management; Tecnologie informatiche per la prevenzione dei rischi industriali e la gestione delle emergenze

Energy Technology Data Exchange (ETDEWEB)

Balducelli, C; Bologna, S; Di Costanzo, G; Vicoli, G [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dip. Energia

1996-07-01

This document provides an overview about problems related to the engineering of computer based systems for industrial risk prevention and emergency management. Such systems are rather complex and subject to precise reliability and safety requirements. With the evolution of information technologies, such systems are becoming to be the means for building protective barriers for reduction of risk associated with plant operations. For giving more generality to this document, and for not concentrating on only a specific plant, the emergency management systems will be dealt with more details than ones for accident prevention. The document is organized in six chapters. Chapter one is an introduction to the problem and to its state of art, with particular emphasis to the aspects of safety requirements definition. Chapter two is an introduction to the problems related to the emergency management and to the training of operators in charge of this task. Chapter three deals in details the topic of the Training Support Systems, in particular about MUSTER (multi-user system for training and evaluation of environmental emergency response) system. Chapter four deals in details the topic of decision support systems, in particular about ISEM (information technology support for emergency management) system. Chapter five illustrates an application of support to the operators of Civil Protection Department for the management of emergencies in the fields of industrial chemical. Chapter six is about a synthesis of the state of art and the future possibilities, identifying some research and development activities more promising for the future.

Consequences of electricity deregulation on nuclear safety

International Nuclear Information System (INIS)

Podjavorsek, M.

2007-01-01

The evolution of deregulation of electricity market started a couple of years ago and has not been finished yet. Deregulation causes increased pressure to reduce the costs of electricity generation. This presents a new challenge to regulatory bodies. They have to assess the impact of these changes on the safety of nuclear power plants. Accordingly, it is important to identify the risks to the nuclear power industry resulting from the deregulation. Today's trend is that the number of electricity generating power companies will be reduced in Europe and also in Slovenia due to tough competition in the electricity market. The electricity price has decreased after the introduction of the deregulated market in most countries. This has been also the main reason for less investment to new generating capacities since the price has been lower than the generation costs. Investment problems are also present for the existing units, because of danger of inappropriate maintenance and reduction of the number of staff and their qualifications below the desired level that leads to loss of institutional memory. It is expected that only the biggest companies can stand the consequences of competition in electricity prices and consequential pressure to reduce the cost. In order to review the impact of deregulation of the electricity market some relevant points are discussed in this paper such as the need to cut costs of companies by reducing the number of their activities and increasing the efficiency in the remaining activities and /or outsourcing of activities, power station operating regime, safety culture, grid reliability, reliability and safety of operation, increased number of transients, ageing of components, outage duration, extended cycle and response of nuclear regulators. From a regulatory point of view the impact of deregulation on nuclear safety is an important issue. This paper also discusses analyses and evaluations of this impact and proposes some measures how to

Patient Safety and Healthcare Quality

Directory of Open Access Journals (Sweden)

Aikaterini Toska

2012-01-01

Full Text Available Introduction: Due to a variety of circumstances and world-wide research findings, patient safety andquality care during hospitalization have emerged as major issues. Patient safety deficits may burdenhealth systems as well as allocated resources. The international community has examined severalproposals covering general and systemic aspects in order to improve patient safety; several long-termprograms and strategies have also been implemented promoting the participation of health-relatedagents, and also government agencies and non-governmental organizations.Aim: Those factors that have negative correlations with patient safety and quality healthcare weredetermined; WHO and EU programs as well as the Greek health policy were also reviewed.Method: Local and international literature was reviewed, including EU and WHO official publications,by using the appropriate keywords.Conclusions: International cooperation on patient safety is necessary in order to improvehospitalization and healthcare quality standards. Such incentives depend heavily on establishing worldwideviable and effective health programs and planning. These improvements also require further stepson safe work procedures, environment safety, hazard management, infection control, safe use ofequipment and medication, and sufficient healthcare staff.

Work zone safety : physical and behavioral barriers in accident prevention.

Science.gov (United States)

2014-05-01

This report discusses the usefulness of creating a work zone traffic safety culture as a methodology to improve the overall : safety of both work zone personnel and the traveling public in Missouri. As part of this research, the existing MoDOT : w : ...

Sun Safety

Science.gov (United States)

... Children from the Sun? Are There Benefits to Spending Time Outdoors? The Surgeon General’s Call to Action to Prevent Skin Cancer Related Resources Sun Safety Tips for Men Tips for Families Tips for Schools Tips for Employers Tips for ...

Safety assessment in plant layout design using indexing approach: Implementing inherent safety perspective

International Nuclear Information System (INIS)

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-01-01

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design

Analysis on safety production in coal mines Henan Province

Institute of Scientific and Technical Information of China (English)

KONG Liu-an; ZHANG Wen-yong

2006-01-01

Based on the rigorous situation of safety production in coal mines, the paper analyzed the statistical data of recent accidents indexes in Henan's coal mines. Using investigation and comparison analysis methods, a specified analysis on mining conditions, technical facility level, safety input and vocational quality of workers in Henan's coal mines was conducted. The result indicates that there have been existing such main safety production problems as weak safety management, low-level facilities, inadequate safety input and poor vocational quality and so on. Finally it proposes such reference solutions as to establish and perfect coal mining supervision and management system, to increase safety investment into techniques and facilities and to strengthen workers' safety education and introduction of more high-level professional talents.

Forty years of crime prevention in the Dutch Polder

NARCIS (Netherlands)

van Dijk, J.J.M.; de Waard, J.; Crawford, A.

2009-01-01

For the past two decades the growth of public policies and strategies aimed at crime prevention and community safety has constituted one of the major innovations in crime control, with significant implications for the manner in which crime and safety are governed. But how has 'the preventive turn'

Zagazig Journal of Occupational Health and Safety

African Journals Online (AJOL)

Zagazig Journal of Occupational Health and Safety is aimed at physicians and researchers in the wide-ranging discipline of occupational and environmental health and safety. The field is devoted to the diagnosis, prevention, management and scientific analysis of occupational , environmental and safety health problems; ...

78 FR 64504 - Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety...

Science.gov (United States)

2013-10-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Safety and Occupational Health Study Section (SOHSS), National Institute for Occupational Safety and Health (NIOSH or..., Number 177, Pages 56235-56236. Contact Person for More Information: Price Connor, Ph.D., NIOSH Health...

Engineered safeguards and passive safety features (safety analysis detailed report no. 6)

Energy Technology Data Exchange (ETDEWEB)

1988-01-15

The Safety-Analysis Summary lists the reactor's safety aspects for passive and active prevention of severe accidents and mitigation of accident consequences, i.e., intrinsic and passive protections of the plant; intrinsic and passive protections of the core; inherent decay-heat removal systems; rapid-shutdown systems; four physical containment barriers. This report goes into further details regarding some of this aspects.

The ring plus project: safety and acceptability of vaginal rings that protect women from unintended pregnancy.

Science.gov (United States)

Schurmans, Céline; De Baetselier, Irith; Kestelyn, Evelyne; Jespers, Vicky; Delvaux, Thérèse; Agaba, Stephen K; van Loen, Harry; Menten, Joris; van de Wijgert, Janneke; Crucitti, Tania

2015-04-10

Research is ongoing to develop multipurpose vaginal rings to be used continuously for contraception and to prevent Human Immunodeficiency Virus (HIV) infection. Contraceptive vaginal rings (CVRs) are available in a number of countries and are most of the time used intermittently i.e. three weeks out of a 4-week cycle. Efficacy trials with a dapivirine-containing vaginal ring for HIV prevention are ongoing and plans to develop multi-purpose vaginal rings for prevention of both HIV and pregnancy have been elaborated. In contrast with the CVRs, multi-purpose vaginal rings will have to be used continuously. Women who continuously use a CVR will no longer have menses. Furthermore, some safety aspects of CVR use have never been studied in-depth in the past, such as the impact of the vaginal ring on the vaginal microbiota, biofilm formation and induction of inflammation. We studied acceptability and these novel aspects of safety in Rwandan women. Although significant progress has been made over the past decade, Rwanda still has a high unmet need for contraception (with 47% unplanned births) and a generalized HIV epidemic, and CVRs are not yet available. We will conduct an open label, single centre, randomized controlled trial. A total of 120 HIV-negative women will be randomized to intermittent CVR use (to allow menstruation) or continuous CVR use. Women will be followed for a maximum of 14 weeks. In parallel, we will conduct a qualitative study using in-depth interview and focus group discussion methodology. In addition to evaluating the safety and acceptability of intermittent and continuous CVR use in Rwandan women, we hope that our findings will inform the development of future multipurpose vaginal rings, will prepare Rwandan study populations for future clinical trials of multipurpose vaginal rings, and will pave the way for introduction of CVRs on African markets. Clinicaltrials.gov NCT01796613 . Registered 14 February 2013.

Evaluating the horizontal alignment of safety management activities through cross-reference of data from safety audits, meetings and investigations

NARCIS (Netherlands)

Karanikas, Nektarios

2017-01-01

Vertical and horizontal alignment within organizations are seen as prerequisites for meeting strategic objectives and indications of effective management. In the area of safety management, the concept of vertical alignment has been followed through the introduction of hierarchical structures and

Towards servitization in the management of occupational safety

Directory of Open Access Journals (Sweden)

Jasmina Berbegal

2014-04-01

Full Text Available Purpose: This article aims to examine the relationship between occupational accidents and the type of occupational safety resources that the company implements. Design/methodology/approach: Using a sample of 4750 firms gathered from the National Survey of Safety Management and Health Enterprises (ENGE for 2009, we first carried out a descriptive analysis of the data, and second we run an empirical analysis based on logistic and Tobit regressions. Findings and Originality/value: The results allow us to identify which companies and what kind of preventive activities are usually outsourced to an external firm specialized at providing occupational safety services. Second, the empirical analysis shows that outsourcing part of occupational safety activities also helps reduce the index of workplace accidents. Research limitations/implications: The present case focuses on Spanish companies and for a particular period (years 2007 and 2008. Because each country has specific regulations regarding the implementation of occupational safety services, the conclusions cannot be directly extrapolated to other countries. Practical implications: The results obtained are hoped to assist companies in choosing those prevention services that best suits their needs. Furthermore, this study is expected to contribute to the current debate on the design of prevention policies by public authorities, encouraging the outsourcing of occupational safety services as a way to take advantage of their expertise and reduce the number of accidents. Originality/value: Most of the academic literature on occupational safety has ignored the study of the impact that prevention services have on the firm’s performance, in terms of occupational accidents. This article contributes to filling this gap by demonstrating that the servitization trend is also impacting in the field of occupational safety.

TIS General Safety Group Annual Report 2000

CERN Document Server

Weingarten, W

2001-01-01

This report summarises the main activities of the General Safety (GS) Group of the Technical Inspection and Safety Division (TIS) during the year 2000, and the results obtained. The different topics in which the Group is active are covered: general safety inspections and ergonomy, electrical, chemistry and gas safety, chemical pollution containment and control, industrial hygiene, the safety of civil engineering works and outside contractors, fire prevention and the safety aspects of the LHC experiments.

Current status of nuclear safety research

International Nuclear Information System (INIS)

Anon.

1977-01-01

Efforts at nuclear safety research have expanded year by year in Japan, in term of money and technical achievement. The Atomic Energy Commission set last year the five year nuclear safety research program, a guideline by which various research institutes will be able to develop their own efforts in a concerted manner. From the results of the nuclear safety research which cover very wide areas ranging from reactor engineering safety, safety of nuclear fuel cycle facilities, prevention of radiation hazards to the adequate treatment and disposal of radioactive wastes, AIJ hereafter focuses of LWR engineering safety and prevents two articles, one introducing the current results of the NSSR program developed by JAERI and the other reporting the LWR reliability demonstration testing projects being promoted by MITI. The outline of these demonstration tests was reported in this report. The tests consist of earthquake resistance reliability test of nuclear power plants, steam generator reliability tests, valve integrity tests, fuel assembly reliability tests, reliability tests of heat affected zones and reliability tests of pumps. (Kobatake, H.)

Disposal of Radioactive Waste. Specific Safety Requirements

International Nuclear Information System (INIS)

2011-01-01

This publication establishes requirements applicable to all types of radioactive waste disposal facility. It is linked to the fundamental safety principles for each disposal option and establishes a set of strategic requirements that must be in place before facilities are developed. Consideration is also given to the safety of existing facilities developed prior to the establishment of present day standards. The requirements will be complemented by Safety Guides that will provide guidance on good practice for meeting the requirements for different types of waste disposal facility. Contents: 1. Introduction; 2. Protection of people and the environment; 3. Safety requirements for planning for the disposal of radioactive waste; 4. Requirements for the development, operation and closure of a disposal facility; 5. Assurance of safety; 6. Existing disposal facilities; Appendices.

An introduction to a new IAEA safety guide: 'ageing management for nuclear power plants'

International Nuclear Information System (INIS)

Pachner, J.; Inagaki, T.; Kang, K.S.

2008-01-01

This paper reports on a new IAEA Safety Guide entitled 'Ageing Management for Nuclear Power Plants' which is currently in an advanced draft form, awaiting approval of publication. The new Safety Guide will be an umbrella document for a comprehensive set of guidance documents on ageing management which have been issued by the IAEA. The Safety Guide first presents basic concepts of ageing management as a common basis for the recommendations on: proactive management of ageing throughout the life cycle of a nuclear power plant (NPP); systematic approach to managing ageing in the operation of NPPs; managing obsolescence; and review of ageing management for long term operation (life extension). The Safety Guide is intended to assist operators in establishing, implementing and improving systematic ageing management programs in NPPs and may be used by regulators in preparing regulatory standards and guides, and in verifying that ageing in nuclear power plants is being effectively managed. (author)

The NASA Aviation Safety Program: Overview

Science.gov (United States)

Shin, Jaiwon

2000-01-01

In 1997, the United States set a national goal to reduce the fatal accident rate for aviation by 80% within ten years based on the recommendations by the Presidential Commission on Aviation Safety and Security. Achieving this goal will require the combined efforts of government, industry, and academia in the areas of technology research and development, implementation, and operations. To respond to the national goal, the National Aeronautics and Space Administration (NASA) has developed a program that will focus resources over a five year period on performing research and developing technologies that will enable improvements in many areas of aviation safety. The NASA Aviation Safety Program (AvSP) is organized into six research areas: Aviation System Modeling and Monitoring, System Wide Accident Prevention, Single Aircraft Accident Prevention, Weather Accident Prevention, Accident Mitigation, and Synthetic Vision. Specific project areas include Turbulence Detection and Mitigation, Aviation Weather Information, Weather Information Communications, Propulsion Systems Health Management, Control Upset Management, Human Error Modeling, Maintenance Human Factors, Fire Prevention, and Synthetic Vision Systems for Commercial, Business, and General Aviation aircraft. Research will be performed at all four NASA aeronautics centers and will be closely coordinated with Federal Aviation Administration (FAA) and other government agencies, industry, academia, as well as the aviation user community. This paper provides an overview of the NASA Aviation Safety Program goals, structure, and integration with the rest of the aviation community.

Road pricing and road safety : possible effects on road safety of 23 variants of road pricing.

NARCIS (Netherlands)

Eenink, R.G. Dijkstra, A. Wijnen, W. & Janssen, S.T.M.C.

2007-01-01

The Nouwen Committee (National Platform Paying Differently for Mobility) advised the Cabinet in 2005 about the introduction of a system of road pricing. Part of this advice consisted of a calculation of the expected road safety effects of such a system. In a letter to the Minister of Transport, SWOV

Safety and efficacy of distal perfusion catheterization to prevent limb ischemia after common femoral artery cannulation for extracorporeal membrane oxygenation

Energy Technology Data Exchange (ETDEWEB)

Jeon, Chang Ho; Seong, Nak Jong; Yoon, Chang Jin [Dept. of Radiology, Seoul National University Bundang Hospital, Seongnam (Korea, Republic of)

2016-06-15

The extracorporeal membrane oxygenation (ECMO) cannula has the potential for obstructing flow to the lower limb, thus causing severe ischemia and possible limb loss. We evaluated the safety and clinical efficacy of percutaneous distal perfusion catheterization in preventing limb ischemia. Between March 2013 and February 2015, 28 patients with distal perfusion catheterization after ECMO were included in this retrospective study. The technical success was evaluated by Doppler ultrasound at the popliteal level after saline injection via distal perfusion catheter. Clinical success was assessed when at least one of the following conditions was met: restoration of continuous peripheral limb oximetry value or presence of distal arterial pulse on Doppler ultrasound evaluation or resolution of early ischemic sign after connecting the catheter with ECMO. Twenty-six patients with early ischemia were successfully cannulated with a distal perfusion catheter (92.8%). Clinical success was achieved in 12/28 (42.8%) patients; 8/10 (80.0%) patients with survival duration exceeding 7 days and 4/18 (22.2%) patients with survival duration less than 7 days, respectively. A percutaneous distal perfusion catheter placement was a feasible tool with safety and efficacy in preventing lower limb ischemia for patients with prolonged common femoral arterial cannulation for ECMO.

Safety and efficacy of distal perfusion catheterization to prevent limb ischemia after common femoral artery cannulation for extracorporeal membrane oxygenation

International Nuclear Information System (INIS)

Jeon, Chang Ho; Seong, Nak Jong; Yoon, Chang Jin

2016-01-01

The extracorporeal membrane oxygenation (ECMO) cannula has the potential for obstructing flow to the lower limb, thus causing severe ischemia and possible limb loss. We evaluated the safety and clinical efficacy of percutaneous distal perfusion catheterization in preventing limb ischemia. Between March 2013 and February 2015, 28 patients with distal perfusion catheterization after ECMO were included in this retrospective study. The technical success was evaluated by Doppler ultrasound at the popliteal level after saline injection via distal perfusion catheter. Clinical success was assessed when at least one of the following conditions was met: restoration of continuous peripheral limb oximetry value or presence of distal arterial pulse on Doppler ultrasound evaluation or resolution of early ischemic sign after connecting the catheter with ECMO. Twenty-six patients with early ischemia were successfully cannulated with a distal perfusion catheter (92.8%). Clinical success was achieved in 12/28 (42.8%) patients; 8/10 (80.0%) patients with survival duration exceeding 7 days and 4/18 (22.2%) patients with survival duration less than 7 days, respectively. A percutaneous distal perfusion catheter placement was a feasible tool with safety and efficacy in preventing lower limb ischemia for patients with prolonged common femoral arterial cannulation for ECMO

Safety assessment of genetically modified foods

NARCIS (Netherlands)

Kleter, G.A.; Noordam, M.Y.

2016-01-01

The cultivation of genetically modified (GM) crops has steadily increased since their introduction to the market in the mid-1990s. Before these crops can be grown and sold they have to obtain regulatory approval in many countries, the process of which includes a pre-market safety assessment. The

The design of the SAFE or SORRY? study: a cluster randomised trial on the development and testing of an evidence based inpatient safety program for the prevention of adverse events

Directory of Open Access Journals (Sweden)

Koopmans Raymond TCM

2009-04-01

Full Text Available Abstract Background Patients in hospitals and nursing homes are at risk of the development of, often preventable, adverse events (AEs, which threaten patient safety. Guidelines for prevention of many types of AEs are available, however, compliance with these guidelines appears to be lacking. Besides general barriers that inhibit implementation, this non-compliance is associated with the large number of guidelines competing for attention. As implementation of a guideline is time-consuming, it is difficult for organisations to implement all available guidelines. Another problem is lack of feedback about performance using quality indicators of guideline based care and lack of a recognisable, unambiguous system for implementation. A program that allows organisations to implement multiple guidelines simultaneously may facilitate guideline use and thus improve patient safety. The aim of this study is to develop and test such an integral patient safety program that addresses several AEs simultaneously in hospitals and nursing homes. This paper reports the design of this study. Methods and design The patient safety program addresses three AEs: pressure ulcers, falls and urinary tract infections. It consists of bundles and outcome and process indicators based on the existing evidence based guidelines. In addition it includes a multifaceted tailored implementation strategy: education, patient involvement, and a computerized registration and feedback system. The patient safety program was tested in a cluster randomised trial on ten hospital wards and ten nursing home wards. The baseline period was three months followed by the implementation of the patient safety program for fourteen months. Subsequently the follow-up period was nine months. Primary outcome measure was the incidence of AEs on every ward. Secondary outcome measures were the utilization of preventive interventions and the knowledge of nurses regarding the three topics. Randomisation took

Safety on the Trampoline: A Progression Model for the Safe Introduction of Trampoline Fundamentals.

Science.gov (United States)

Frederick, A. B.

1979-01-01

A ten-phase program from the introduction of trampoline fundamentals is presented to provide all learners with a suitable initiation and test that can lead to further experience on the trampoline or to a number of training applications. (JMF)

Safety assessment and detection methods of genetically modified organisms.

Science.gov (United States)

Xu, Rong; Zheng, Zhe; Jiao, Guanglian

2014-01-01

Genetically modified organisms (GMOs), are gaining importance in agriculture as well as the production of food and feed. Along with the development of GMOs, health and food safety concerns have been raised. These concerns for these new GMOs make it necessary to set up strict system on food safety assessment of GMOs. The food safety assessment of GMOs, current development status of safety and precise transgenic technologies and GMOs detection have been discussed in this review. The recent patents about GMOs and their detection methods are also reviewed. This review can provide elementary introduction on how to assess and detect GMOs.

Chemical plant innovative safety investments decision-support methodology.

Science.gov (United States)

Reniers, G L L; Audenaert, A

2009-01-01

This article examines the extent to which investing in safety during the creation of a new chemical installation proves profitable. The authors propose a management supporting cost-benefit model that identifies and evaluates investments in safety within a chemical company. This innovative model differentiates between serious accidents and less serious accidents, thus providing an authentic image of prevention-related costs and benefits. In classic cost-benefit analyses, which do not make such differentiations, only a rudimentary image of potential profitability resulting from investments in safety is obtained. The resulting management conclusions that can be drawn from such classical analyses are of a very limited nature. The proposed model, however, is applied to a real case study and the proposed investments in safety at an appointed chemical installation are weighed against the estimated hypothetical benefits resulting from the preventive measures to be installed at the installation. In the case-study carried out in question, it would appear that the proposed prevention investments are justified. Such an economic exercise may be very important to chemical corporations trying to (further) improve their safety investments.

16 CFR 1700.15 - Poison prevention packaging standards.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Poison prevention packaging standards. 1700.15 Section 1700.15 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION POISON PREVENTION PACKAGING ACT OF 1970 REGULATIONS POISON PREVENTION PACKAGING § 1700.15 Poison prevention packaging...

Development of preventive maintenance procedures and schedules

International Nuclear Information System (INIS)

Schlenker, H.V.; Hammel, J.

1977-01-01

An outline of the procedures and schedules developed for preventive maintenance in power stations within the Rheinisch-Westfaelisches Elektrizitaetswerk (RWE) is presented. After an introduction of maintenance in general the different kinds of preventive maintenance activities are described. This includes also the prerequisite identification systems. The aims of preventive maintenance and the measures are explained that have to be taken, if these aims are to be achieved. A number of examples from actual practice are cited. (orig.) [de

The challenges in monitoring and preventing patient safety incidents for people with intellectual disabilities in NHS acute hospitals: evidence from a mixed-methods study.

Science.gov (United States)

Tuffrey-Wijne, Irene; Goulding, Lucy; Gordon, Vanessa; Abraham, Elisabeth; Giatras, Nikoletta; Edwards, Christine; Gillard, Steve; Hollins, Sheila

2014-09-24

There has been evidence in recent years that people with intellectual disabilities in acute hospitals are at risk of preventable deterioration due to failures of the healthcare services to implement the reasonable adjustments they need. The aim of this paper is to explore the challenges in monitoring and preventing patient safety incidents involving people with intellectual disabilities, to describe patient safety issues faced by patients with intellectual disabilities in NHS acute hospitals, and investigate underlying contributory factors. This was a 21-month mixed-method study involving interviews, questionnaires, observation and monitoring of incident reports to assess the implementation of recommendations designed to improve care provided for patients with intellectual disabilities and explore the factors that compromise or promote patient safety. Six acute NHS Trusts in England took part. Data collection included: questionnaires to clinical hospital staff (n = 990); questionnaires to carers (n = 88); interviews with: hospital staff including senior managers, nurses and doctors (n = 68) and carers (n = 37); observation of in-patients with intellectual disabilities (n = 8); monitoring of incident reports (n = 272) and complaints involving people with intellectual disabilities. Staff did not always readily identify patient safety issues or report them. Incident reports focused mostly around events causing immediate or potential physical harm, such as falls. Hospitals lacked effective systems for identifying patients with intellectual disabilities within their service, making monitoring safety incidents for this group difficult.The safety issues described by the participants were mostly related to delays and omissions of care, in particular: inadequate provision of basic nursing care, misdiagnosis, delayed investigations and treatment, and non-treatment decisions and Do Not Attempt Cardiopulmonary Resuscitation (DNACPR) orders. The events leading to avoidable harm

‘‘The Internet is a Mask’’: High School Students’ Suggestions for Preventing Cyberbullying

Directory of Open Access Journals (Sweden)

Leandra N. Parris

2014-08-01

Full Text Available Introduction: Interactions through technology have an important impact on today’s youth. While some of these interactions are positive, there are concerns regarding students engaging in negative interactions like cyberbullying behaviors and the negative impact these behaviors have on others. The purpose of the current study was to explore participant suggestions for both students and adults for preventing cyberbullying incidents. Methods: Forty high school students participated in individual, semi-structured interviews. Participant experiences and perceptions were coded using constant comparative methods to illustrate ways in which students and adults may prevent cyberbullying from occurring within their school and community. Results: Students reported that peers would benefit from increasing online security, as well as becoming more aware of their cyber-surroundings. Regarding adult-provided prevention services, participants often discussed that there is little adults can do to reduce cyberbullying. Reasons included the difficulties in restricting online behaviors or providing effective consequences. However, some students did discuss the use of in-school curricula while suggesting that adults blame people rather than technology as potential ways to prevent cyberbullying. Conclusion: Findings from the current study indicate some potential ways to improve adult efforts to prevent cyberbullying. These strategies include parent/teacher training in technology and cyberbullying, interventions focused more on student behavior than technology restriction, and helping students increase their online safety and awareness.

Introduction into scientific work methods-a necessity when performance-based codes are introduced

DEFF Research Database (Denmark)

Dederichs, Anne; Sørensen, Lars Schiøtt

The introduction of performance-based codes in Denmark in 2004 requires new competences from people working with different aspects of fire safety in the industry and the public sector. This abstract presents an attempt in reducing problems with handling and analysing the mathematical methods...... and CFD models when applying performance-based codes. This is done within the educational program "Master of Fire Safety Engineering" at the department of Civil Engineering at the Technical University of Denmark. It was found that the students had general problems with academic methods. Therefore, a new...

New arrivals: an indicator for non-indigenous species introductions at different geographical scales

Directory of Open Access Journals (Sweden)

Sergej Olenin

2016-10-01

Full Text Available Several legal and administrative instruments aimed to reduce the spread of non-indigenous species, that may pose harm to the environment, economy and/or human health, were developed in recent years at international and national levels, such as the International Convention for the Control and Management of Ship’s Ballast Water and Sediments, the International Council for the Exploration of the Sea Code of Practice on the Introductions and Transfers of Marine Organisms, the EU Regulation on Invasive Alien Species and the Marine Strategy Framework Directive, the US Invasive Species Act, the Biosecurity Act of New Zealand, etc. The effectiveness of these instruments can only be measured by successes in the prevention of new introductions. We propose an indicator, the arrival of new non-indigenous species (nNIS, which helps to assess introduction rates, especially in relation to pathways and vectors of introduction, and is aimed to support management. The technical precondition for the calculation of nNIS is the availability of a global, continuously updated and verified source of information on aquatic non-indigenous species. Such a database is needed, because the indicator should be calculated at different geographical scales: 1 for a particular area, such as port or coast of a country within a Large Marine Ecosystem (LME; 2 for a whole LME; and 3 for a larger biogeographical region, including two or more neighboring LMEs. The geographical scale of nNIS helps to distinguish between a primary introduction and secondary spread, which may involve different pathways and vectors. This, in turn, determines the availability of management options, because it is more feasible to prevent a primary introduction than to stop subsequent secondary spread. The definition of environmental target, size of assessment unit and possible limitations of the indicator are also discussed.

On the road to new nuclear safety

International Nuclear Information System (INIS)

Kovacs, Zoltan; Novakova, Helena; Spenlinger, Robert

2013-01-01

The article describes the issue of nuclear safety of nuclear power plants and major factors affecting nuclear safety, discusses the consequences of the Fukushima-Daiichi accident, and outlines the advanced concept of nuclear safety which extends the current regulatory requirements for plant safety. This new concept should be adopted globally to prevent occurrences having similar consequences worldwide. The tasks of this new nuclear safety concept are discussed. (orig.)

Effects of safety climate on safety norm violations: exploring the mediating role of attitudinal ambivalence toward personal protective equipment.

Science.gov (United States)

Cavazza, Nicoletta; Serpe, Alessandra

2009-01-01

Research on the role of organizational and psychosocial factors in influencing risk behaviors and the likelihood of injury at work showed that safety climate also has great impact on workers' behavior. However, the mechanisms through which this impact operates are still partially unclear. In order to explore the role that attitudinal ambivalence toward wearing PPE might play in mediating the impact of safety climate on safety norm violations, a questionnaire was administered to 345 Italian workers. Three dimensions of safety climate (i.e., company safety concern, senior managers' safety concern, supervisors' attitudes towards safety) were found to be positively associated with the individual ambivalence level, whereas the fourth one (i.e., work pressure) was negatively correlated with it. In turn, low levels of ambivalence were associated with a lower tendency to break the safety norms, even though the perception of a good safety climate also maintained a direct effect on unsafe behaviors. Designers of training program for the prevention of work related injuries must pay great attention to the psycho-social factors (such as the effects of the safety climate perception by employees on their attitudes and behaviors), and include specific contents into the prevention programs in order to improve workers compliance with safety norms.

Occupational Injury Prevention Research in NIOSH

Directory of Open Access Journals (Sweden)

Hongwei Hsiao

2010-12-01

Full Text Available This paper provided a brief summary of the current strategic goals, activities, and impacts of the NIOSH (National Institute for Occupational Safety and Health occupational injury research program. Three primary drivers (injury database, stakeholder input, and staff capacity were used to define NIOSH research focuses to maximize relevance and impact of the NIOSH injury-prevention-research program. Injury data, strategic goals, program activities, and research impacts were presented with a focus on prevention of four leading causes of workplace injury and death in the US: motor vehicle incidents, falls, workplace violence, and machine and industrial vehicle incidents. This paper showcased selected priority goals, activities, and impacts of the NIOSH injury prevention program. The NIOSH contribution to the overall decrease in fatalities and injuries is reinforced by decreases in specific goal areas. There were also many intermediate outcomes that are on a direct path to preventing injuries, such as new safety regulations and standards, safer technology and products, and improved worker safety training. The outcomes serve as an excellent foundation to stimulate further research and worldwide partnership to address global workplace injury problems.

Introduction

DEFF Research Database (Denmark)

Jensen, Rasmus Thybo; Moran, Dermot

2012-01-01

An introduction to a special issue of Phenomenology and the Cognitive Sciences dedicated to empathy and the direct perception approach to other minds......An introduction to a special issue of Phenomenology and the Cognitive Sciences dedicated to empathy and the direct perception approach to other minds...

Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care.

Science.gov (United States)

Esmail, Aneez; Valderas, Jose M; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

2015-09-01

This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009-2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement.

Activities of the PNC Nuclear Safety Working Group

International Nuclear Information System (INIS)

Kato, W.Y.

1991-01-01

The Nuclear Safety Working Group of the Pacific Nuclear Council promotes nuclear safety cooperation among its members. Status of safety research, emergency planning, development of lists of technical experts, severe accident prevention and mitigation have been the topics of discussion in the NSWG. This paper reviews and compares the severe accident prevention and mitigation program activities in some of the areas of the Pacific Basin region based on papers presented at a special session organized by the NSWG at an ANS Topical Meeting as well as papers from other sources

Women and AIDS: introduction.

Science.gov (United States)

Krieger, N; Margo, G

1991-01-01

Around the world, more and more women--principally poor women of color--are being diagnosed with and are dying of AIDS, the acquired immune deficiency syndrome. Yet, effective and appropriate prevention programs for women are sorely missing from the global program to control AIDS. To help us understand why this gap exists, and what we must do to close it, the three articles in this issue focus on women and AIDS. Examining the situation in such countries as Zimbabwe and South Africa, as well as in other economically underdeveloped and developed regions, the authors argue that women with the least control over their bodies and their lives are at greatest risk of acquiring AIDS. For example, the high rate of infection among women in Africa cannot be understood apart from the legacy of colonialism (including land expropriation and the forced introduction of a migrant labor system) and the insidious combination of traditional and European patriarchal values. Only by recognizing the socioeconomic and cultural determinants of both disease and sexual behavior, and only by incorporating these insights into our AIDS prevention programs, will we be able to curb the spread of this lethal disease.

Prevention, The Beginning of the Rehabilitation Process: A View from New Zealand. Monograph #46.

Science.gov (United States)

Campbell, Ian B.

The monograph argues that prevention should be considered the first step in the rehabilitation process, and examines preventive efforts in the areas of occupational safety, road safety, home safety, and sporting and recreational safety. Following an introductory chapter, other chapters discuss: (1) the close relationship between compensation,…

Safety Bulletin 2013-3

CERN Multimedia

HSE Unit

2013-01-01

The HSE Unit just released the Safety Bulletin 2013-3 entitled “Drive with caution!”.   The Bulletin is available on EDMS under the following number: 1325442. Be reminded  that HSE Safety Bulletins are published in English and French and share feedbacks of incidents/nearmiss/accidents that happened on the CERN site with the aim to improve prevention.

Safety Bulletin 2013-1

CERN Multimedia

HSE Unit

2013-01-01

The HSE Unit has just released the Safety Bulletin 2013-1 entitled “When the alarm rings, you must leave!”.   The Bulletin is available on EDMS under the following number: 1307611. Be reminded  that HSE Safety Bulletins are published in English and French and share feedback on incidents/nearmiss/accidents on the CERN site with the aim of improving prevention.

Safety of antimicrobial treatment during pregnancy

DEFF Research Database (Denmark)

Lamont, Harriet F; Blogg, Henrietta J; Lamont, Ronald F

2014-01-01

Introduction: The extent of antibiotic use in pregnancy remains unknown but may occur in > 40% of pregnant women for various indications, at different gestational ages from different sources. Areas covered: Antibiotic resistance, alterations to the neonatal immune system causing allergy, asthma...... in scrutinizing the safety of antibiotic use in pregnancy....

Safety management of an underground-based gravitational wave telescope: KAGRA

Science.gov (United States)

Ohishi, Naoko; Miyoki, Shinji; Uchiyama, Takashi; Miyakawa, Osamu; Ohashi, Masatake

2014-08-01

KAGRA is a unique gravitational wave telescope with its location underground and use of cryogenic mirrors. Safety management plays an important role for secure development and operation of such a unique and large facility. Based on relevant law in Japan, Labor Standard Act and Industrial Safety and Health Law, various countermeasures are mandated to avoid foreseeable accidents and diseases. In addition to the usual safety management of hazardous materials, such as cranes, organic solvents, lasers, there are specific safety issues in the tunnel. Prevention of collapse, flood, and fire accidents are the most critical issues for the underground facility. Ventilation is also important for prevention of air pollution by carbon monoxide, carbon dioxide, organic solvents and radon. Oxygen deficiency should also be prevented.

Smartphone-based safety planning and self-monitoring for suicidal patients : Rationale and study protocol of the CASPAR (Continuous Assessment for Suicide Prevention And Research) study

NARCIS (Netherlands)

Nuij, Chani; van Ballegooijen, Wouter; Ruwaard, Jeroen; de Beurs, Derek; Mokkenstorm, Jan; van Duijn, Erik; de Winter, Remco F.P.; O'Connor, Rory C.; Smit, Jan H.; Riper, Heleen; Kerkhof, Ad

2018-01-01

Background: It remains difficult to predict and prevent suicidal behaviour, despite growing understanding of the aetiology of suicidality. Clinical guidelines recommend that health care professionals develop a safety plan in collaboration with their high-risk patients, to lower the imminent risk of

The critical safety functions and plant operation

International Nuclear Information System (INIS)

Corcoran, W.R.; Church, J.F.; Porter, N.J.; Cross, M.T.; Guinn, W.M.

1981-01-01

The paper outlines the operator's role in nuclear safety and introduces the concept of ''safety functions''. Safety functions are a group of actions that prevent core melt or minimize radiation releases to the general public. They can be used to provide a hierarchy of practical plant protection that an operator should use. ''An accident identical to that at Three Mile Island is not going to happen again'', said the Rogovin investigators. The concepts put forward in this paper are intended to help the operator avoid serious consequence from the next unexpected threat. On the basis of the safety evaluation, the operator has three roles in assuring that the consequences of an event will be no worse than the predicted acceptable results. These three operator roles are: first, maintain plant setup in readiness to properly respond; second, operate the plant in a manner such that fewer, milder events minimize the frequency and the severity of adverse events; third, the operator needs to monitor the plant to verify that the safety functions are accomplished. The operator needs a systematic approach to mitigating the consequences of an event. The concept of ''safety function'' introduces that systematic approach and prevents a hierarchy of protection. If the operator has difficulty in identifying an event for any reason, the systematic safety function approach allows ones to accomplish the overall path of mitigating consequences. There are ten identified functions designed to protect against core melt, preserve containment integrity, prevent indirect release of radioactivity, and maintain vital auxiliaries needed to support the other safety functions. The paper describes in detail the operator's role and the safety functions, and provides many examples of the use of alternative success paths to accomplish the safety function

The management system for the safe transport of radioactive material. Safety guide

International Nuclear Information System (INIS)

2008-01-01

The purpose of this Safety Guide is to provide information to organizations that are developing, implementing or assessing a management system for activities relating to the transport of radioactive material. Such activities include, but are not limited to, design, fabrication, inspection and testing, maintenance, transport and disposal of radioactive material packaging. This publication is intended to assist those establishing or improving a management system to integrate safety, health, environmental, security, quality and economic elements to ensure that safety is properly taken into account in all activities of the organization. Contents: 1. Introduction; 2. Management system; 3. Management responsibility; 4. Resource management; 5. Process implementation; 6. Measurement, assessment and improvement; Appendix: Graded approach for management systems for the safe transport of radioactive materials; Annex I: Two examples of management systems; Annex II: Examples of management system standards; Annex III: Example of a documented management system (or quality assurance programme) for an infrequent consignor; Annex IV: Example of a documented management system (or quality assurance programme) description for an infrequent carrier; Annex V: Example of a procedure for control of records; Annex VI: Example of a procedure for handling packages containing radioactive materials, including receipt and dispatch; Annex VII: Example of a packaging maintenance procedure in a complex organization; Annex VIII: Example of an internal audit procedure in a small organization; Annex IX: Example of a corrective and preventive action procedure

Compliant flooring to prevent fall-related injuries in older adults: A scoping review of biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety.

Science.gov (United States)

Lachance, Chantelle C; Jurkowski, Michal P; Dymarz, Ania C; Robinovitch, Stephen N; Feldman, Fabio; Laing, Andrew C; Mackey, Dawn C

2017-01-01

Compliant flooring, broadly defined as flooring systems or floor coverings with some level of shock absorbency, may reduce the incidence and severity of fall-related injuries in older adults; however, a lack of synthesized evidence may be limiting widespread uptake. Informed by the Arksey and O'Malley framework and guided by a Research Advisory Panel of knowledge users, we conducted a scoping review to answer: what is presented about the biomechanical efficacy, clinical effectiveness, cost-effectiveness, and workplace safety associated with compliant flooring systems that aim to prevent fall-related injuries in healthcare settings? We searched academic and grey literature databases. Any record that discussed a compliant flooring system and at least one of biomechanical efficacy, clinical effectiveness, cost-effectiveness, or workplace safety was eligible for inclusion. Two independent reviewers screened and abstracted records, charted data, and summarized results. After screening 3611 titles and abstracts and 166 full-text articles, we included 84 records plus 56 companion (supplementary) reports. Biomechanical efficacy records (n = 50) demonstrate compliant flooring can reduce fall-related impact forces with minimal effects on standing and walking balance. Clinical effectiveness records (n = 20) suggest that compliant flooring may reduce injuries, but may increase risk for falls. Preliminary evidence suggests that compliant flooring may be a cost-effective strategy (n = 12), but may also result in increased physical demands for healthcare workers (n = 17). In summary, compliant flooring is a promising strategy for preventing fall-related injuries from a biomechanical perspective. Additional research is warranted to confirm whether compliant flooring (i) prevents fall-related injuries in real-world settings, (ii) is a cost-effective intervention strategy, and (iii) can be installed without negatively impacting workplace safety. Avenues for future research are

Vaccine Safety Datalink

Science.gov (United States)

The Vaccine Safety Datalink is part of the National Immunization Program within the Centers for Disease Control and Prevention and was started in recognition of gaps in the scientific knowledge of rare vaccine side effects.

Recommendations: Procedure to develop a preliminary safety report as part of the radioactive waste repository construction licensing process

International Nuclear Information System (INIS)

2003-01-01

The structure of a preliminary safety report for the title purpose should be as follows: A. Textual part: 1. General (Introduction, Basic information about the construction, Timetable); 2. Site information (Siting, Geography and demography, Meteorology and climatic situation, Hydrology, Geology and hydrogeology); 3. Repository design description (Basic function and performance requirements, Design, Auxiliary systems, Fire prevention/protection, Emergency plans); 4. Operation of the repository (Waste acceptance and inspection, Waste handling and interim storage, Waste disposal, Operating monitoring), 5. Health and environmental impact assessment (Radionuclide inventory, Radionuclide transport paths and mechanisms of release into the environment, Radionuclide release in normal and emergency situations, Radiation protection - health impact assessment and regulatory compliance, Draft operating limits and conditions, Proposed ways of assuring physical protection, Uncertainty assessment), 6. Safe repository shutdown/decommissioning concept, 7 Quality assurance assessment, 8. List of selected equipment. B. Annexes: Maps, Drawings, Diagrams, Miscellaneous; C. Documentation: Previous safety report amendments, Protocols, Miscellaneous. (P.A.)

New energy introduction vision in Chiba Prefecture; Chibaken shin energy donyu vision

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Surveys and discussions were given on establishing a new energy introduction vision in Chiba Prefecture. The basic conception for new energy introduction regarded important the handling of global environment problems, improvement of the global environment, enhancement in energy security, and assurance of the regional performance of disaster prevention. New energy introduction is thought making it possible to create attractive urban spaces, make living environment more agreeable, and promote and breed new industries including the eco-business. Important measures may include the followings: introduction of new and economic energies in multiple ways for individual buildings and facilities, development of environment symbiotic cities utilizing new energies, improvement of region symbiotic cities in industrial zones, effective utilization of energies from wide-area refuses and wastes, establishment of an urban type cleaning plant that utilizes effectively energies from general wastes, new energy utilization in coordination with agricultural activities, utilization of new energies in fishery industry areas, and expansion in use of clean energy fueled automobiles including natural gas fueled automobiles. (NEDO)

Safety rod driving device

International Nuclear Information System (INIS)

Murakami, Kiyonobu; Kurosaki, Akira.

1988-01-01

Purpose: To rapidly insert safety rods for a criticality experiment device into a reactor core container to stop the criticality reaction thereby prevent reactivity accidents. Constitution: A cylinder device having a safety rod as a cylinder rod attached with a piston at one end is constituted. The piston is elevated by pressurized air and attracted and fixed by an electromagnet which is a stationary device disposed at the upper portion of the cylinder. If the current supply to the electromagnet is disconnected, the safety rod constituting the cylinder rod is fallen together with the piston to the lower portion of the cylinder. Since the cylinder rod driving device has neither electrical motor nor driving screw as in the conventional device, necessary space can be reduced and the weight is decreased. In addition, since the inside of the nuclear reactor can easily be shielded completely from the external atmosphere, leakage of radioactive materials can be prevented. (Horiuchi, T.)

RB research reactor Safety Report

International Nuclear Information System (INIS)

Sotic, O.; Pesic, M.; Vranic, S.

1979-04-01

This RB reactor safety report is a revised and improved version of the Safety report written in 1962. It contains descriptions of: reactor building, reactor hall, control room, laboratories, reactor components, reactor control system, heavy water loop, neutron source, safety system, dosimetry system, alarm system, neutron converter, experimental channels. Safety aspects of the reactor operation include analyses of accident causes, errors during operation, measures for preventing uncontrolled activity changes, analysis of the maximum possible accident in case of different core configurations with natural uranium, slightly and highly enriched fuel; influence of possible seismic events

Millwright Apprenticeship. Related Training Modules. 1.1-1.8 Safety.

Science.gov (United States)

Lane Community Coll., Eugene, OR.

This packet, part of the instructional materials for the Oregon apprenticeship program for millwright training, contains eight modules covering safety. The modules provide information on the following topics: general safety, hand tool safety, power tool safety, fire safety, hygiene, safety and electricity, types of fire and fire prevention, and…