Examination of the bases for proposed innovations in reactor safety technology

International Nuclear Information System (INIS)

Moses, D.L.

1986-01-01

This paper employs the criteria for evaluations from the Nuclear Power Option Viability Study to examine the bases for proposed innovations in light water reactor safety technology. These bases for innovation fall into four broad categories as follows: (1) virtually exclusive reliance on passive safety features to preclude core damage in all situations, (2) design simplification using some passive safety features to reduce the frequency of core damage to less than about 10 -6 per reactor-year, (3) passive containment to preclude releases from any accident, and (4) designing to limit licensing attention to one or at least a few systems. Of these, only the first two, and perhaps only the second, hold significant promise for providing for the viability of advanced light water reactors

Innovation of Supervision System for Quality and Safety of Edible Agricultural Products

Institute of Scientific and Technical Information of China (English)

Xingxing; MEI; Zhongchao; FENG

2014-01-01

This paper elaborated multidimensional characteristics of quality and safety of agricultural products,introduced current situation of quality and safety supervision of edible agricultural products in China,analyzed existing problems of quality and safety supervision system and corresponding reasons,and finally came up with recommendations for innovation of supervision system for quality and safety of agricultural products.

Innovation in the Safety of nuclear systems: fundamental aspects

International Nuclear Information System (INIS)

Herranz, L. E.

2009-01-01

Safety commercial nuclear reactors has been an indispensable condition for future enlargement of power generation based on nuclear technology. Its fundamental principle, defence in depth, far from being outdated, is still adopted as a key foundation in the advanced nuclear system (generations III and IV). Nevertheless, the cumulative experience gained in the operation and maintenance of nuclear reactors, the development of methodologies like the probabilistic safety analysis, the use of passive safety systems and, even, the inherent characteristics of some new design (which exclude accident scenarios), allow estimating safety figures of merit even more outstanding that those achieved in the second generation of nuclear reactors. This safety innovation of upcoming nuclear reactors has entailed a huge investigation program (generation III) that will be focused on optimizing and demonstrating the postulated safety of future nuclear systems (Generation IV). (Author)

User requirements in the area of safety of innovative nuclear reactors and fuel cycle installations

International Nuclear Information System (INIS)

Kuczera, B.; Juhn, P.E.; Fukuda, K.; )

2002-01-01

Full text: Against the background of already existing IAEA and INSAC publications in the area of safety, in the framework of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) a set of user requirements for the safety of future nuclear installations has been established. Five top-level requirements are expected to apply to any type of innovative design. They should foster an increased level of safety that is transparent to and fully accepted by the general public. The approach to future reactor safety includes two complementary strategies: increased emphasis on inherent safety characteristics and enhancement of defense in depth. As compared to existing plants, the effectiveness of preventing measures should be highly enhanced, resulting in fewer mitigation measures. The targets and possible approaches of each of the five levels of defense developed for innovative reactor designs are outlined in the paper

Chemical plant innovative safety investments decision-support methodology.

Science.gov (United States)

Reniers, G L L; Audenaert, A

2009-01-01

This article examines the extent to which investing in safety during the creation of a new chemical installation proves profitable. The authors propose a management supporting cost-benefit model that identifies and evaluates investments in safety within a chemical company. This innovative model differentiates between serious accidents and less serious accidents, thus providing an authentic image of prevention-related costs and benefits. In classic cost-benefit analyses, which do not make such differentiations, only a rudimentary image of potential profitability resulting from investments in safety is obtained. The resulting management conclusions that can be drawn from such classical analyses are of a very limited nature. The proposed model, however, is applied to a real case study and the proposed investments in safety at an appointed chemical installation are weighed against the estimated hypothetical benefits resulting from the preventive measures to be installed at the installation. In the case-study carried out in question, it would appear that the proposed prevention investments are justified. Such an economic exercise may be very important to chemical corporations trying to (further) improve their safety investments.

Food Safety Practices Assessment Tool: An Innovative Way to Test Food Safety Skills among Individuals with Special Needs

Science.gov (United States)

Carbone, Elena T.; Scarpati, Stanley E.; Pivarnik, Lori F.

2013-01-01

This article describes an innovative assessment tool designed to evaluate the effectiveness of a food safety skills curriculum for learners receiving special education services. As schools respond to the increased demand for training students with special needs about food safety, the need for effective curricula and tools is also increasing. A…

Innovative Patient Safety Curriculum Using iPAD Game (PASSED) Improved Patient Safety Concepts in Undergraduate Medical Students.

Science.gov (United States)

Kow, A W C; Ang, B L S; Chong, C S; Tan, W B; Menon, K R

2016-11-01

While healthcare outcomes have improved significantly, the complex management of diseases in the hospitals has also escalated the risks in patient safety. Therefore, in the process of training medical students to be proficient in medical knowledge and skills, the importance of patient safety cannot be neglected. A new innovation using mobile apps gaming system (PAtient Safety in Surgical EDucation-PASSED) to teach medical students on patient safety was created. Students were taught concepts of patient safety followed by a gaming session using iPad games created by us. This study aims to evaluate the outcome of patient safety perception using the PASSED games created. An interactive iPad game focusing on patient safety issues was created by the undergraduate education team in the Department of Surgery, Yong Loo Lin School of Medicine at the National University of Singapore. The game employed the unique touched-screen feature with clinical scenarios extracted from the hospital sentinel events. Some of the questions were time sensitive, with extra bonus marks awarded if the student provided the correct answer within 10 s. Students could reattempt the questions if the initial answer was wrong. However, this entailed demerit points. Third-year medical students posted to the Department of Surgery experienced this gaming system in a cohort of 55-60 students. Baseline understanding of the students on patient safety was evaluated using Attitudes to Patient Safety Questionnaire III (APSQ-III) prior to the game. A 20 min talk on concept of patient safety using the WHO Patient Safety Guidelines was conducted. Following this, students downloaded the apps from ITune store and played with the game for 20-30 min. The session ended with the students completing the postintervention questionnaire. A total of 221 3rd year medical students responded to the survey during the PASSED session. Majority of the students felt that the PASSED game had trained them to understand the

Quality and safety of agri-food systems: technological and economic innovations

Directory of Open Access Journals (Sweden)

Domenico Ragazzi

2008-04-01

Full Text Available This study aims to point out the evolution of the economical approach to the topics of agri-food product quality and safety with particular attention to the schemes developed at European level. Thus, we wish to underline the forces which identified the insurance and certification systems as innovative tools for quality problem management in agri-food systems and what aspects they allow to manage according to the different needs of the stakeholders. In the last years, the proliferation of these schemes was so strong to considered the recent Iso 22000 Law as a possible solution for the harmonization process. Finally, some aspects of traceability systems are examined, apart from law obligations, identifying important opportunity of differentiation and acquisition of competitive advantages for the organization choosing them.

How is success achieved by individuals innovating for patient safety and quality in the NHS?

Science.gov (United States)

Sheard, Laura; Jackson, Cath; Lawton, Rebecca

2017-09-11

Innovation in healthcare is said to be notoriously difficult to achieve and sustain yet simultaneously the health service is under intense pressure to innovate given the ever increasing demands placed upon it. Whilst many studies have looked at diffusion of innovation from an organisational perspective, few have sought to understand how individuals working in healthcare innovate successfully. We took a positive deviance approach to understand how innovations are achieved by individuals working in the NHS. We conducted in depth interviews in 2015 with 15 individuals who had received a national award for being a successful UK innovator in healthcare. We invited only those people who were currently (or had recently) worked in the NHS and whose innovation focused on improving patient safety or quality. Thematic analysis was used. Four themes emerged from the data: personal determination, the ability to broker relationships and make connections, the ways in which innovators were able to navigate organisational culture to their advantage and their ability to use evidence to influence others. Determination, focus and persistence were important personal characteristics of innovators as were skills in being able to challenge the status quo. Innovators were able to connect sometimes disparate teams and people, being the broker between them in negotiating collaborative working. The culture of the organisation these participants resided in was important with some being able to use this (and the current patient safety agenda) to their advantage. Gathering robust data to demonstrate their innovation had a positive impact and was seen as essential to its progression. This paper reveals a number of factors which are important to the success of innovators in healthcare. We have uncovered that innovators have particular personal traits which encourage a propensity towards change and action. Yet, for fruitful innovation to take place, it is important for relational networks and

Assessment of the innovative quality of agomelatine through the Innovation Assessment Algorithm

Directory of Open Access Journals (Sweden)

Liliana Civalleri

2012-09-01

Full Text Available Aim: the aim of this study was to assess the innovative quality of a medicine based on agomelatine, authorized by the European Commission through a centralized procedure on 19th February 2009 and distributed in Italy under the brands Valdoxan® and Thymanax®.Methodology: the degree of innovation of agomelatine was determined through the Innovation Assessment Algorithm (IAA, which considers the innovative quality of a medicine as a combination of multiple properties. The algorithm may be represented as a decision tree, with each branch corresponding to a property connected with innovation and having a fixed numerical value. The sum of these values establishes the degree of innovation of the medicine. The IAA is articulated in two phases: the first assesses the efficacy of the drug based on the clinical trials presented in support of the registration application (IAA-efficacy; the second reconsiders the degree of innovation on the basis of the efficacy and safety data resulting from clinical practice once the drug has been placed on the market (IAA-effectiveness.Results and conclusions: the score obtained for agomelatine was 592.73 in the efficacy phase and 291.3 in the effectiveness phase. The total score for the two phases was 884, which is equivalent to a good degree of innovation for the molecule

An Innovative Hybrid Loop-Pool SFR Design and Safety Analysis Methods: Today and Tomorrow

International Nuclear Information System (INIS)

Hongbin Zhang; Haihua Zhao; Vincent Mousseau

2008-01-01

Investment in commercial sodium cooled fast reactor (SFR) power plants will become possible only if SFRs achieve economic competitiveness as compared to light water reactors and other Generation IV reactors. Toward that end, we have launched efforts to improve the economics and safety of SFRs from the thermal design and safety analyses perspectives at Idaho National Laboratory. From the thermal design perspective, an innovative hybrid loop-pool SFR design has been proposed. This design takes advantage of the inherent safety of a pool design and the compactness of a loop design to further improve economics and safety. From the safety analyses perspective, we have initiated an effort to develop a high fidelity reactor system safety code

Logistic innovations in transport

Directory of Open Access Journals (Sweden)

Mirosław Antonowicz

2014-03-01

Full Text Available Introduction: The article discusses the issue of logistic innovations in transport. The essentials of logistic innovations in transport together with some examples of specific innovations are presented. The role of the client's needs in transport innovations is indicated. The most vital postulates affecting the innovativeness of shipping companies and derived from the author's experience as well as scholarly publications, are time, safety, reliability as well as comprehensiveness of service offer. Following the analysis of the issue, and on the grounds of Kaizen's and Lean's method, the concept of continuous innovations is suggested as very useful for the development of transport. The potential of clusters as the source of logistic innovations in transport is emphasised. Methods: The discussion of the issue was preceded by the author's analysis of written sources on innovativeness, the evaluation of ratings of innovativeness as well as the analysis of rewarded innovative solutions in transport subsequent to the businesses participation in the programme of innovative solutions in transport. The role of innovation practical business operations is argued following the analysis of some strategic documents such as: 2011 White Paper and the Strategy for the Development of Transport by 2020 adopted by the Polish government in 2013. Aim: The aim of the article is to present the role and significance of the issue of logistic innovations in transport and to cite instances of practical solutions implemented by shipping companies, the solutions which resulted in measurable effects. Following the author's observation of the instances of innovative solutions as well as his analysis of the ratings of innovativeness, the article aims to present the conclusions as for the specific kinds of activities which are indispensable to foster innovativeness in transport. Conclusions: The conclusions derived from the author's analyses and observations show that logistic

Glue Guns: Aiming for Safety

Science.gov (United States)

Roy, Ken

2010-01-01

While glue guns are very useful, there are safety issues. Regardless of the temperature setting, glue guns can burn skin. The teacher should demonstrate and supervise the use of glue guns and have a plan should a student get burned. There should be an initial first aid protocol in place, followed by a visit to the school nurse. An accident report…

Innovation and knowledge generation in cooperation nets: challenges for regulations in the nuclear safety area in Brazil

International Nuclear Information System (INIS)

Staude, Fabio

2014-01-01

The importance of inter-organisational cooperation within the innovation process has been increasingly recognized. In fact, all organisations, at some point, need to look to external sources for inputs to the process of building up technological competence. In this sense, through a detailed case study, this thesis examine theoretical and empirically how collaborative initiatives have supported the Brazilian nuclear regulatory body in the development and implementation of innovations, in order to verify the positive relationship between the collaboration and the organisational innovation performance. Emphasizing the importance of both internal sources of knowledge and external participation, the study encompasses documentary analysis, a preliminary survey and semi-structured interviews with the regulatory body employers in charge of controlling medical and research facilities and activities involving radiation sources. The thesis demonstrates that innovations developed and implemented in the Brazilian nuclear safety and security area are associated with collaborative initiatives, in order to improve the organizational capability to fulfill safety obligations, providing some important implications for regulatory body managers concerned with the management of innovation. The findings also identified actors with a significant degree of influence in the innovation process. The result reveals that the support provided by these actors has a significant influence on the innovation performance of the Brazilian nuclear regulatory body, suggesting that Brazil should adopt more interactive models of innovation and knowledge transfer. In addition, the findings show that these key actors can play a very distinctive role in the context of sectoral systems of innovation information regime. (author)

Considerations in the development of safety requirements for innovative reactors: Application to modular high temperature gas cooled reactors

International Nuclear Information System (INIS)

2003-08-01

Member States of the IAEA have frequently requested this organization to assess, at the conceptual stage, the safety of the design of nuclear reactors that rely on a variety of technologies and are of a high degree of innovation. However, to date, for advanced and innovative reactors and for reactors with characteristics that are different from those of existing light water reactors, widely accepted design standards and rules do not exist. This TECDOC is an outcome of the efforts deployed by the IAEA to develop a general approach for assessing the safety of the design of advanced and innovative reactors, and of all reactors in general including research reactors, with characteristics that differ from those of light water reactors. This publication puts forward a method for safety assessment that is based on the well established and accepted principle of defence in depth. The need to develop a general approach for assessing the safety of the design of reactors that applies to all kinds of advanced reactors was emphasized by the request to the IAEA by South Africa to review the safety of the South African pebble bed modular reactor. This reactor, as other modular high temperature gas cooled reactors (MHTGRs), adopts very specific design features such as the use of coated particle fuel. The characteristics of the fuel deeply affect the design and the safety of the plant, thereby posing several challenges to traditional safety assessment methods and to the application of existing safety requirements that have been developed primarily for water reactors. In this TECDOC, the MHTGR has been selected as a case study to demonstrate the viability of the method proposed. The approach presented is based on an extended interpretation of the concept of defence in depth and its link with the general safety objectives and fundamental safety functions as set out in 'Safety of Nuclear Power Plants: Design', IAEA Safety Standards No. NS-R.1, issued by the IAEA in 2000. The objective

Key Mechanisms for Employee-Driven Innovation in Governmental Client Organisations

DEFF Research Database (Denmark)

Sørensen, Henrik; Wandahl, Søren; Faber, Lene

2018-01-01

the mechanisms of organisational trust, innovation safety, organisational practices, cultural settings and the recognition and rewards structure to motivate employees. The decision-making procedures should be transparent especially to the idea-owner and the employees involved, and the implementation and putting......In order to ensure that knowledge and ideas are transformed into innovative contributions, a systematic approach is important. The aim of this research was to identify the specific mechanisms that are key to implementing an innovation process model when conducting Employee-driven Innovation...... into practice should be fast progressed phases in the innovation process....

A Core Design Approach Aimed at Sustainability and Intrinsic Safety

International Nuclear Information System (INIS)

Grasso, Giacomo

2013-01-01

The comprehensive approach adopted for the core design of all LFRs investigated within the LEADER project, proved to effectively drive the design to the fulfillment of the aimed sustainability performances, and the respect of the design constraints for the robust implementation of the inherent safety principle: • the ELFR core is able to operate adiabatically, with a very narrow reactivity swing along a 2.5 y cycle; • wide margins are provided for protecting the fuel and the structures even in case of unprotected transients, allowing for very long grace times

An innovative approach to interdisciplinary occupational safety and health education.

Science.gov (United States)

Rosen, Mitchel A; Caravanos, Jack; Milek, Debra; Udasin, Iris

2011-07-01

The New York and New Jersey Education and Research Center (ERC) provides a range of graduate continuing education for occupational safety and health (OSH) professionals in training. A key element of the education is to provide interdisciplinary training to industrial hygienists, ergonomists, occupational medicine physicians and other health and safety trainees to prepare them for the collaboration required to solve the complex occupational health and safety problems they will face in their careers. This center has developed an innovative interdisciplinary training approach that provides an historical aspect, while allowing the graduate students to identify solutions to occupational issues from a multi-disciplinary approach. The ERC developed a tour that brings students to sites of historical and/or contemporary significance in the occupational safety and health and environmental fields. The ERC has conducted five tours, and has included 85 students and residents as participants. 80% of participants rated the tour as providing a high amount of OSH knowledge gained. 98% of the participants felt the goal of providing interdisciplinary education was achieved. This tour has been successful in bridging the OSH fields to better understand how occupational and environmental exposures have occurred, in order to prevent future exposures so that workplace conditions and health can be improved. Copyright © 2011 Wiley-Liss, Inc.

Knowledge evaluation : A new aim for knowledge management to enhance sustainable innovation

NARCIS (Netherlands)

Peters, K.; Maruster, L.; Jorna, R.J.J.M.; Remenyi, D

2007-01-01

Sustainability is a topic that presently forces organizations to strive for innovation. Sustainable innovation relates to organizational measures to gain more sustainable outcomes and processes from a social and ecological point of view (People, Planet 8 Profit, i.e. the three Ps, Elkington 1997).

Using the Donabedian framework to examine the quality and safety of nursing service innovation.

Science.gov (United States)

Gardner, Glenn; Gardner, Anne; O'Connell, Jane

2014-01-01

To evaluate the safety and quality of nurse practitioner service using the audit framework of Structure, Process and Outcome. Health service and workforce reform are on the agenda of governments and other service providers seeking to contain healthcare costs whilst providing safe and effective health care to communities. The nurse practitioner service is one health workforce innovation that has been adopted globally to improve timely access to clinical care, but there is scant literature reporting evaluation of the quality of this service innovation. A mixed-methods design within the Donabedian evaluation framework was used. The Donabedian framework was used to evaluate the Structure, Process and Outcome of nurse practitioner service. A range of data collection approaches was used, including stakeholder survey (n = 36), in-depth interviews (11 patients and 13 nurse practitioners) and health records data on service processes. The study identified that adequate and detailed preparation of Structure and Process is essential for the successful implementation of a service innovation. The multidisciplinary team was accepting of the addition of nurse practitioner service, and nurse practitioner clinical care was shown to be effective, satisfactory and safe from the perspective of the clinician stakeholders and patients. This study demonstrated that the Donabedian framework of Structure, Process and Outcome evaluation is a valuable and validated approach to examine the safety and quality of a service innovation. Furthermore, in this study, specific Structure elements were shown to influence the quality of service processes further validating the framework and the interdependence of the Structure, Process and Outcome components. Understanding the Structure and Process requirements for establishing nursing service innovation lays the foundation for safe, effective and patient-centred clinical care. © 2013 John Wiley & Sons Ltd.

Utilizing data consortia to monitor safety and effectiveness of biosimilars and their innovator products.

Science.gov (United States)

Baldziki, Mike; Brown, Jeff; Chan, Hungching; Cheetham, T Craig; Conn, Thomas; Daniel, Gregory W; Hendrickson, Mark; Hilbrich, Lutz; Johnson, Ayanna; Miller, Steven B; Moore, Tom; Motheral, Brenda; Priddy, Sarah A; Raebel, Marsha A; Randhawa, Gurvaneet; Surratt, Penny; Walraven, Cheryl; White, T Jeff; Bruns, Kevin; Carden, Mary Jo; Dragovich, Charlie; Eichelberger, Bernadette; Rosato, Edith; Sega, Todd

2015-01-01

The Biologics Price Competition and Innovation Act, introduced as part of the Affordable Care Act, directed the FDA to create an approval pathway for biologic products shown to be biosimilar or interchangeable with an FDA-approved innovator drug. These biosimilars will not be chemically identical to the reference agent. Investigational studies conducted with biosimilar agents will likely provide limited real-world evidence of their effectiveness and safety. How do we best monitor effectiveness and safety of biosimilar products once approved by the FDA and used more extensively by patients? To determine the feasibility of developing a distributed research network that will use health insurance plan and health delivery system data to detect biosimilar safety and effectiveness signals early and be able to answer important managed care pharmacy questions from both the government and managed care organizations. Twenty-one members of the AMCP Task Force on Biosimilar Collective Intelligence Systems met November 12, 2013, to discuss issues involved in designing this consortium and to explore next steps. The task force concluded that a managed care biosimilars research consortium would be of significant value. Task force members agreed that it is best to use a distributed research network structurally similar to existing DARTNet, HMO Research Network, and Mini-Sentinel consortia. However, for some surveillance projects that it undertakes, the task force recognizes it may need supplemental data from managed care and other sources (i.e., a "hybrid" structure model). The task force believes that AMCP is well positioned to lead the biosimilar-monitoring effort and that the next step to developing a biosimilar-innovator collective intelligence system is to convene an advisory council to address organizational governance.

[Evaluation of the safety of innovative drugs against viruses and infectious agents].

Science.gov (United States)

Kobayashi, Tetsu; Yusa, Keisuke; Kawasaki, Nana

2013-01-01

Recently, several novel cellular therapy products and biological drugs are being developed to treat various previously untreatable diseases. One of the most important issues regarding these innovations is how to ensure safety over infectious agents, including viruses and prions, in the earliest treatments with these products. The object of this study is a risk assessment of cases of human infectious with the agents and to present a sample risk management plan based on a collaboration among the National Institute of Health Sciences, universities, marketing authorization holders, and scientific societies. There are three subjects of study: (1) the viral safety of cellular therapy products, (2) the viral safety of biological drugs, and (3) the safety of prions. In this report, we describe the objects of the study, the project members, the study plan outline, and the ongoing plans. The results of the viral risk identification and the risk analysis of cellular therapy products will also be described, based on a review of the literature and case reports obtained during the first year of this project.

Science Is Indispensable to Frugal Innovations

Directory of Open Access Journals (Sweden)

Balkrishna C. Rao

2018-04-01

Full Text Available In recent years, frugal innovations have become widely popular due to their no-frills nature that entails lower costs. However, most of the frugal innovations, at least at the grassroots level, are makeshift contraptions, made from indigenous ingenuity, that achieve their goals under constraints on various resources but may suffer from limited lifespans due to premature failure. Consequently, it is imperative that sound scientific principles not be overlooked or haphazardly applied in realizing these innovations, irrespective of their grassroots or sophisticated nature. This article therefore argues for the need to use science, sometimes at the cutting edge, to realize grassroots and advanced frugal innovations that are not prone to failure under various working conditions. In so doing, this work advocates the use of classical and new design methodologies that are rooted in science to save resources and, hence lower costs, while aiming for robust functionality of frugal products. In particular, a frugal design approach using a modern version of the safety factor called the “factor of frugality” has been propounded to effectively create any type of frugal innovation from scratch. By combining the ingenuity of the resourceful creators of frugal innovations with a scientific approach that aims to make the resulting products “fail proof”, such innovations may better contribute value to business and benefits to society.

Constructing a Model for Safe Nuclear Energy. General Conference Event to Focus on Innovative Cross-cutting Approach to Nuclear Safety

International Nuclear Information System (INIS)

Verlini, Giovanni

2011-01-01

Two innovative IAEA Extra-Budgetary Programmes, supporting safe nuclear energy in Bulgaria and Romania, passed their one-year milestone in 2010. Funded by the Norwegian government, these programmes are unique in that they cover separate but cross-cutting issues related to nuclear safety, including safety culture, safety assessments, risk management and resource management.

Bioeconomy in Romania - Aim for an Innovative Economy?

Directory of Open Access Journals (Sweden)

Manuela Dora Orboi

2017-11-01

Full Text Available In the world, population growth phenomenon is accentuated, being estimated an increase of 30% over the next 40 years, leading to more than 9 billion people by the year 2050. In this period, mankind will face a exploitation without preceding of its natural resources, them being finite. There will be significant climate change, loss of biodiversity, increasing pressures on the environment, threatening, thus, the stability of living systems. In this context, Europe needs to change the manner of approaching to production, consumption, processing, storage, recycling and disposal of biological resources. Bioeconomy is the key element for smart growth in Europe, aspect pointed out in the Europe 2020 strategy adopted by the European Commission. This strategy is based on the Seventh Framework Program for Research and Technological Development (FP7 and the EU Framework Program for Research and Innovation (Horizon 2020. Bio-economy represents a cost savings in using the soil and sea biological resources, including the production of renewable biological resources and conversion of those resources and waste to value-added products (food, feed, bio bioenergy. Bioeconomy include sectors like agriculture, forestry, fisheries, food industry, as well as parts of chemical industry biotechnological and energetic. Bioeconomy relies on life sciences, agronomy, ecology, food science, social sciences, biotechnology, information and communication technologies and engineering. The bioeconomy support granted in the European Union offers many opportunities for Romania. Through bioeconomy specific approaches, the bioresources production potential in Romania could be exploited. Developing and implementing new solutions for better exploitation of this Romanian potential requires a significant investment in education and research. For Romania, the bioeconomy is a chance, an objective for a more innovative economy, smart, low emissions and with more sustainable use of renewable

EC-sponsored research activities on innovative passive safety systems

International Nuclear Information System (INIS)

Bermejo, J.M.; Goethem, G. van

2000-01-01

On April 26th 1994, the European Union (EU) adopted via a Council Decision a EURATOM Multiannual Programme for community activities in the field of Nuclear Fission Safety (NFS) Research for the period 1994 to 1998. An area of work having, as an objective, to 'explore innovative approaches' to improve the safety of future and existing reactors, was introduced in this programme. Most of the projects selected in this area, which have been grouped under a common cluster known as 'INNO', are currently being carried out on a 'cost-shared' basis, i.e. contribution of the European Commission is up to 50% of the total cost. At present, the 'INNO' cluster is composed of 10 projects in which 25 different organisations, representing research centres, universities, regulators, utilities and vendors from 7 EU member states and Switzerland, are involved. These projects are proving to be an efficient means to gain the necessary phenomenological knowledge and to solve the challenging problems, many times of generic nature, posed among others by the characteristically small driving forces of the systems studied and by the lack of really prototypical test facilities. (author)

John M. Eisenberg Patient Safety Awards. System innovation: Veterans Health Administration National Center for Patient Safety.

Science.gov (United States)

Heget, Jeffrey R; Bagian, James P; Lee, Caryl Z; Gosbee, John W

2002-12-01

In 1998 the Veterans Health Administration (VHA) created the National Center for Patient Safety (NCPS) to lead the effort to reduce adverse events and close calls systemwide. NCPS's aim is to foster a culture of safety in the Department of Veterans Affairs (VA) by developing and providing patient safety programs and delivering standardized tools, methods, and initiatives to the 163 VA facilities. To create a system-oriented approach to patient safety, NCPS looked for models in fields such as aviation, nuclear power, human factors, and safety engineering. Core concepts included a non-punitive approach to patient safety activities that emphasizes systems-based learning, the active seeking out of close calls, which are viewed as opportunities for learning and investigation, and the use of interdisciplinary teams to investigate close calls and adverse events through a root cause analysis (RCA) process. Participation by VA facilities and networks was voluntary. NCPS has always aimed to develop a program that would be applicable both within the VA and beyond. NCPS's full patient safety program was tested and implemented throughout the VA system from November 1999 to August 2000. Program components included an RCA system for use by caregivers at the front line, a system for the aggregate review of RCA results, information systems software, alerts and advisories, and cognitive acids. Following program implementation, NCPS saw a 900-fold increase in reporting of close calls of high-priority events, reflecting the level of commitment to the program by VHA leaders and staff.

CAREM: an innovative-integrated PWR

International Nuclear Information System (INIS)

Mazzi, R.

2005-01-01

A promising future in view of the increasing worldwide acknowledgment of the Nuclear Power as a bulk-environmentally friendly energy source is envisaged; nevertheless the widespread concerns about nuclear safety means the uppermost challenge to the nuclear designers to achieve massive public acceptance of NPP. CAREM is an Argentine project aimed to achieve the development, design and construction of an innovative, small and integrated Nuclear Power Plant (NPP). The reactor has an indirect cycle with some distinctive features that greatly simplify the design, and also contributes to a higher safety level. Some of the design highlight are: integrated primary cooling system, primary cooling by natural circulation, self-pressurised primary system and safety systems relying on passive features. The innovative solutions are embraced in the 'CAREM Concept' aimed to enhance safety by using simpler and more reliable solutions to tackle major safety design challenges of the nuclear generation industry. The goal is achieved by drastically reducing the conceivable list of initiating events jointly with a large primary water/power ratio that results in spontaneous slow and mild transients even after most severe system or component failure. In addition all Safety Systems are also based on simple and reliable solutions that increase sharply the overall plant reliability at reduced costs. The concept has been engineering developed for the CAREM 25 (prototype, 100 MWth, 27 MWe) considered an appropriate size to display the performance related with the reactor core cooling and safety systems. This module while not cost effective if compared with major sized NPP's installation and operating cost, results appropriate for applications such as supplying domestic or industrial electricity and/or steam (i.e. for a water demineralising plant) at isolated or difficult to access, mid size, populations. A promising market is envisaged for the evolution of the CAREM Concept towards higher

11-th International conference Nuclear power safety and nuclear education - 2009. Abstracts. Part 1. Session: Safety of nuclear technology; Innovative nuclear systems and fuel cycle; Nuclear knowledge management

International Nuclear Information System (INIS)

2009-01-01

The book includes abstracts of the 11-th International conference Nuclear power safety and nuclear education - 2009 (29 Sep - 2 Oct, 2009, Obninsk). Problems of safety of nuclear technology are discussed, innovative nuclear systems and fuel cycles are treated. Abstracts on professional education for nuclear power and industry are presented. Nuclear knowledge management are discussed

Young workers’ occupational safety knowledge creation and habits

OpenAIRE

Hejduk, Irena; Tomczyk, Przemysław

2015-01-01

The problem of young workers'safety culture is important because of the unfavorable demographic trend occurring in the European Union and determinants of competitiveness and innovativeness of the economy. The paper presents the concept and the importance of safety culture and goals of the research program, the aim of which is the construction and verification of the model based on the transfer of knowledge regarding the safety and methods of its implementation.Safety culture is a der...

Physical and psychological consequences of serious road traffic injuries, Deliverable 7.2 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Weijermars, W.A.M. Meunier, J.-C. Bos, N. Perez, C. Hours, M. Johannsen, H. Barnes, J. Brown, L. Quigley, C. Filtness, A. Perez, C. Olabarria, M. Duran, X. Hours, M. Martin, J. Bauer, R. & Johannsen, H.

2017-01-01

SafetyCube aims to develop an innovative road safety Decision Support System (DSS) that will enable policy-makers and stakeholders to select the most appropriate strategies, measures and cost-effective approaches to reduce casualties of all road user types and all severities. Work Package 7 of

Researchers' Roles in Patient Safety Improvement.

Science.gov (United States)

Pietikäinen, Elina; Reiman, Teemu; Heikkilä, Jouko; Macchi, Luigi

2016-03-01

In this article, we explore how researchers can contribute to patient safety improvement. We aim to expand the instrumental role researchers have often occupied in relation to patient safety improvement. We reflect on our own improvement model and experiences as patient safety researchers in an ongoing Finnish multi-actor innovation project through self-reflective narration. Our own patient safety improvement model can be described as systemic. Based on the purpose of the innovation project, our improvement model, and the improvement models of the other actors in the project, we have carried out a wide range of activities. Our activities can be summarized in 8 overlapping patient safety improvement roles: modeler, influencer, supplier, producer, ideator, reflector, facilitator, and negotiator. When working side by side with "practice," researchers are offered and engage in several different activities. The way researchers contribute to patient safety improvement and balance between different roles depends on the purpose of the study, as well as on the underlying patient safety improvement models. Different patient safety research paradigms seem to emphasize different improvement roles, and thus, they also face different challenges. Open reflection on the underlying improvement models and roles can help researchers with different backgrounds-as well as other actors involved in patient safety improvement-in structuring their work and collaborating productively.

Inter-organisational knowledge transfer: building and sustaining the sources of innovation in nuclear safety and security

International Nuclear Information System (INIS)

Staude, Fabio; Ramirez, Matias

2013-01-01

The current complexity of innovation processes has led to an understanding that the models of innovation have changed from linear model to a model characterised by multiple interactions and complex networks. Within this more multifaceted environment, has emerged a new set of actors, generally termed as intermediaries, performing a variety of tasks in the innovation process. The innovation literature has recognised various important supporting activities performed by intermediaries, by linking and facilitating the movement of information and knowledge between actors within an innovation system, in order to fill information gaps. Complementary, we make the assumption that the intermediary can assume a more central role in the innovation process, performing activities beyond to filling information gaps, since they intervene to create, prioritise, and articulate meaning to practices. Under this argument, this paper explores how intermediaries work in making innovation happen in the Brazilian nuclear safety and security area, demonstrating the influence of intermediary organisations in improving nuclear regulatory activities. We make sense of these processes by analyzing intermediary roles in the recent regulatory activities improvements, specifically those related to the practices involving radiation sources in medicine. Thus, through an empirical case study, this paper examines the issue of intermediation in a wide sense, including strategic activities preformed by intermediaries, associated with accessing, diffusing, coordinating and enabling knowledge activities. (author)

Medical innovation laws: an unnecessary innovation.

Science.gov (United States)

Richards, Bernadette

2016-06-01

Objective This paper aims to demonstrate that any suggestion that there is a need for specific innovation laws is flawed. Innovation is central to good medical practice and is adequately supported by current law. Methods The paper reviews the nature of medical innovation and outlines recent attempts in the UK to introduce specific laws aimed at 'encouraging' and 'supporting' innovation. The current legal framework is outlined and the role of the law in relation to medical innovation explored. Results The analysis demonstrates the cyclic relationship between medical advancement and the law and concludes that there is no requirement for specific innovation laws. Conclusions The law not only supports innovation and development in medical treatment but encourages it as central to a functioning medical system. There is no need to introduce specific laws aimed at medical innovation; to do so represents an unnecessary legal innovation and serves to complicate matters. What is known about the topic? Over recent months, there has been a great deal of discussion surrounding the law in the context of medical innovation. This was driven by the attempts in the UK to introduce specific laws in the Medical Innovation Bill. The general subject matter - negligence and the expected standard of care in the provision of treatment - is very well understood, but not in cases where the treatment can be described as innovative. The general rhetoric in both the UK and Australia around the Medical Innovation Bill demonstrates a lack of understanding of the position of the law with regards to innovative treatment. What does this paper add? This paper adds clarity to the debate. It presents the law and explains the manner in which the law can operate around innovative treatment. The paper asserts that medical innovation is both supported and encouraged by existing legal principles. What are the implications for practitioners? The paper presents an argument that can guide the policy position

Validation of innovative technologies and strategies for regulatory safety assessment methods: challenges and opportunities.

Science.gov (United States)

Stokes, William S; Wind, Marilyn

2010-01-01

Advances in science and innovative technologies are providing new opportunities to develop test methods and strategies that may improve safety assessments and reduce animal use for safety testing. These include high throughput screening and other approaches that can rapidly measure or predict various molecular, genetic, and cellular perturbations caused by test substances. Integrated testing and decision strategies that consider multiple types of information and data are also being developed. Prior to their use for regulatory decision-making, new methods and strategies must undergo appropriate validation studies to determine the extent that their use can provide equivalent or improved protection compared to existing methods and to determine the extent that reproducible results can be obtained in different laboratories. Comprehensive and optimal validation study designs are expected to expedite the validation and regulatory acceptance of new test methods and strategies that will support improved safety assessments and reduced animal use for regulatory testing.

Managing for sustainable journalism under authoritarianism: innovative business models aimed at good practice

OpenAIRE

Sakr, N.

2017-01-01

In the repressive political climate prevailing in Egypt in 2013-15, news ventures aspiring to high standards of reporting were forced to innovate in their business models and management techniques in order to underpin ethical journalistic practice that served the public need for information. This chapter explores the interactions between media business innovation and sustainable journalism by analyzing how a number of Egyptian start-ups experimented with novel revenue streams and news service...

Management of Innovative Projects for Ensuring the Economic Safety in the Conditions of Integration of Economies into the World Economy

Directory of Open Access Journals (Sweden)

T. K. Usmanova

2017-01-01

Full Text Available Purpose: the aim of the article is to reveal problems and prospects, formulate economic security within the framework of innovation projects management, plan technologies in the context of integrating economies into the world economy, identify opportunities for forming, organizing, financing, managing priority economic directions. The subject is the management of innovative projects to ensure the economic security of Russian regions. The relevance of the chosen topic is due to the study of the features of the current state and the problems of the formation of economic security, the development of innovative design solutions in the context of integrating economies into the world economy. Ensuring the economic security of the regions of Russia directly depends on the introduction of innovative technologies and project management in the sectors of the national economy of Russia. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Hypothesis. Ensuring an economic safety requires formation of innovative solutions, change of the current legislation within the Strategy of social and economic development in the conditions of integration of economies into the world economy. Results: the practical significance of the work is to identify the interrelationship between the development processes of innovative projects that ensure the economic security of the regions of Russia within the framework of regulating the current legislation, forecasting effective economic activity within the framework of the New Industrialization Strategy, selecting optimal project planning models to ensure the country's economic security and competitiveness in the conditions of integration Economies into the world economy. Conclusions and Relevance: in the conditions of integration of

Proceedings of international topical meeting on VVER technical innovations for next century

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

The proceedings contain 45 presentations, all of which have been input to INIS. They deal predominantly with innovations implemented in recent years at nuclear power plants equipped with reactors of the WWER type, aimed at upgrading the safety and/or efficiency of the plants; some are devoted to studies of safety-related properties of materials or components employed at these power plants. (A.K.)

Proceedings of international topical meeting on VVER technical innovations for next century

International Nuclear Information System (INIS)

2000-01-01

The proceedings contain 45 presentations, all of which have been input to INIS. They deal predominantly with innovations implemented in recent years at nuclear power plants equipped with reactors of the WWER type, aimed at upgrading the safety and/or efficiency of the plants; some are devoted to studies of safety-related properties of materials or components employed at these power plants. (A.K.)

Innovative instrumentation for VVERs based in non-invasive techniques

International Nuclear Information System (INIS)

Jeanneau, H.; Favennec, J.M.; Tournu, E.; Germain, J.L.

2000-01-01

Nuclear power plants such as VVERs can greatly benefit from innovative instrumentation to improve plant safety and efficiency. In recent years innovative instrumentation has been developed for PWRs with the aim of providing additional measurements of physical parameters on the primary and secondary circuits: the addition of new instrumentation is made possible by using non-invasive techniques such as ultrasonics and radiation detection. These innovations can be adapted for upgrading VVERs presently in operation and also in future VVERs. The following innovative instrumentation for the control, monitoring or testing at VVERs is described: 1. instrumentation for more accurate primary side direct measurements (for a better monitoring of the primary circuit); 2. instrumentation to monitor radioactivity leaks (for a safer plant); 3. instrumentation-related systems to improve the plant efficiency (for a cheaper kWh)

Developing a research agenda for patient safety in primary care. Background, aims and output of the LINNEAUS collaboration on patient safety in primary care.

Science.gov (United States)

Esmail, Aneez; Valderas, Jose M; Verstappen, Wim; Godycki-Cwirko, Maciek; Wensing, Michel

2015-09-01

This paper is an introduction to a supplement to The European Journal of General Practice, bringing together a body of research focusing on the issue of patient safety in relation to primary care. The supplement represents the outputs of the LINNEAUS collaboration on patient safety in primary care, which was a four-year (2009-2013) coordination and support action funded under the Framework 7 programme by the European Union. Being a coordination and support action, its aim was not to undertake new research, but to build capacity through engaging primary care researchers and practitioners in identifying some of the key challenges in this area and developing consensus statements, which will be an essential part in developing a future research agenda. This introductory article describes the aims of the LINNEAUS collaboration, provides a brief summary of the reasons to focus on patient safety in primary care, the epidemiological and policy considerations, and an introduction to the papers included in the supplement.

Key Mechanisms for Employee-Driven Innovation in Governmental Client Organisations

DEFF Research Database (Denmark)

Sørensen, Henrik; Faber, Lene; Wandahl, Søren

2018-01-01

the mechanisms of organisational trust, innovation safety, organisational practices, cultural settings and the recognition and rewards structure to motivate employees. The decision-making procedures should be transparent especially to the idea-owner and the employees involved, and the implementation and putting......In order to ensure that knowledge and ideas are transformed into innovative contributions, a systematic approach is important. The aim of this research was to identify the specific mechanisms that are key to implementing an innovation process model when conducting Employee-driven Innovation...... in a governmental client organisation. The methodological approach was an exploratory case study of a governmental client organisation within the Danish construction industry. The units of analysis were groups of employees and managers within the case organisation. The primary mechanisms identified were...

Boiling water reactor with innovative safety concept: The Generation III+ SWR-1000

Energy Technology Data Exchange (ETDEWEB)

Stosic, Zoran V. [AREVA NP GmbH, Koldestr. 16, 91052 Erlangen (Germany)], E-mail: Zoran.Stosic@areva.com; Brettschuh, Werner; Stoll, Uwe [AREVA NP GmbH, Koldestr. 16, 91052 Erlangen (Germany)

2008-08-15

AREVA NP has developed an innovative boiling water reactor (BWR) SWR-1000 in close cooperation with German nuclear utilities and with support from various European partners. This Generation III+ reactor design marks a new era in the successful tradition of BWR and, with a net electrical output of approximately 1250 MWe, is aimed at ensuring competitive power generating costs compared to gas and coal fired stations. It is particularly suitable for countries whose power networks cannot facilitate large power plants. At the same time, the SWR-1000 meets the highest safety standards, including control of core melt accidents. These objectives are met by supplementing active safety systems with passive safety equipment of various designs for accident detection and control and by simplifying systems needed for normal plant operation on the basis of past operating experience. The plant is also protected against airplane crash loads. The functional capabilities and capacities of all new systems and components were successfully tested under realistic and conservative boundary conditions in large-scale test facilities in Finland, Switzerland and Germany. In general, the SWR-1000 design is based on well-proven analytical codes and design tools validated for BWR applications through recalculation of relevant experiments and independent licensing activities performed by authorities or their experts. The overview of used analytical codes and design tools as well as performed experimental validation programs is presented. Effective implementation of passive safety systems is demonstrated through the numerical simulation of transients and loss of coolant accidents (LOCAs) as well as through analytical simulation of a severe accident associated with the core melt. In the LOCA simulation presented the existing active core flooding systems were not used for emergency control: only passive systems were relevant for the analyses. Despite this - no core heat-up occurred. In the case of

Establishment of a rationalized safety assurance logic aiming at FBRs with enhanced social acceptance (1). Interim report of CEA/JNC collaboration NWP-5(a) from 1999 to 2001: common view and JNC's contribution

International Nuclear Information System (INIS)

Niwa, Hajime; Tobita, Yoshiharu; Kurisaka, Kenichi; Kubo, Shigenobu; Kamiyama, Kenji

2001-12-01

This is an interim report describing the progress and the results of the collaborative research works between JNC and CEA on the safety logic in future fast reactors under the title of 'Establishment of a Rationalized Safety Assurance Logic Aiming at FBRs with Enhanced Social Acceptance' from 1999 to 2001. This contains JNC's contribution and common view of both partners. (1) Safety goals are proposed from JNC and CEA. Significant coherency is found such as to keep defense-in depth concept, mitigation measures against core melt are taken into account for containment design, evacuation free' concept is pursued, quantitative safety target is also considered as well as deterministic approach, and improvement of social acceptance is considered from the development stage of the fuel cycle including nuclear power plants. (2) Safety characteristics of each candidate coolant were compared and discussed. Gas-cooled fast reactor is a common interest area. Discussions are focused on: safety design requirements, safety evaluation events list, transient behavior analysis, core catcher designs, and so on. (3) JNC's results include criticality map for predicting CDA behavior and consequences, and CDA analysis results of lead-cooled and gas-cooled fast reactors with SIMMER-III. The collaboration on the action NWP-5a is recognized as being of great importance for the orientation of the innovative design studies. (author)

The Impact of Occupational Safety on Logistics and Automation in Industrial Plants

OpenAIRE

Botti, Lucia

2017-01-01

Research on workplace health and safety analyses the integration of work practices with safety, health and wealth of people at work. The aim of occupational safety is to realize a safe and health work environment, eliminating or reducing the risks for workers' safety and health. The objective of this thesis is the study, integration, development and application of innovative approaches and models for decision-making support in the context of occupational safety in industrial plants and lo...

Guidance for the application of an assessment methodology for innovative nuclear energy systems. INPRO manual - Safety of nuclear fuel cycle facilities. Vol. 9 of the final report of phase 1 of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

International Nuclear Information System (INIS)

2008-11-01

The International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was initiated in the year 2000, based on a resolution of the IAEA General Conference (GC(44)/RES/21). The main objectives of INPRO are (1) to help to ensure that nuclear energy is available to contribute in fulfilling energy needs in the 21st century in a sustainable manner, (2) to bring together both technology holders and technology users to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles; and (3) to create a forum to involve all relevant stakeholders that will have an impact on, draw from, and complement the activities of existing institutions, as well as ongoing initiatives at the national and international level. The INPRO manual is comprised of an overview volume (No. 1), and eight additional volumes covering the areas of economics (Volume 2), infrastructure (Volume 3), waste management (Volume 4), proliferation resistance (Volume 5), physical protection (Volume 6), environment (Volume 7), safety of nuclear reactors (Volume 8), and safety of nuclear fuel cycle facilities (laid out in this report) (Volume 9).This report elaborates on the guidance given in the INPRO report 'Methodology for the assessment of innovative nuclear reactors and fuel cycles', IAEA-TECDOC-1434, and the previous INPRO report 'Guidance for the evaluation for innovative nuclear reactors and fuel cycles', IAEA-TECDOC-1362 (2003), in the area of safety of nuclear reactors. The present version of this manual deals with safety issues related to design and operation of mining, milling, refining, conversion, enrichment, fuel fabrication, fuel storage and fuel reprocessing facilities. The INPRO Manual starts with an introduction in Chapter 1. Chapter 2 sets out the necessary input for an INPRO assessment of the safety of an innovative nuclear fuel cycle facility. This includes information on the design for the plant and the safety

Innovations as a Factor for Ensuring Economic Safety

Directory of Open Access Journals (Sweden)

Maxim SANDU

2017-06-01

Full Text Available In modern conditions of development of the competitive environment, one of the main ways to solve economic, social and environmental problems is to use the latest achievements of science and technology. Each enterprise seeks to ensure that economic growth is intense, i.e. to be a consequence of the application of more sophisticated factors of production and technology. The prerequisite for intensive growth is the use of innovative strategy in the practical activities of enterprises. The end result of innovations is the materialization and industrial development of innovation, the idea of which can be the scientific and technical activity, and marketing research to identify unmet needs. The innovations are an effective defensive reaction of the firm to the emerging threats of losing market place, constant pressure from competitors, the challenge of new technologies, shortening the life of products, legislative restrictions and changing the market situation. In the offensive version, the innovation is a mean of exploiting new opportunities to preserve or gain a competitive advantage. In the long term aspect, the company has no choice but to pursue an innovation policy, which is the only source of lasting success. The main objective of researching the innovation activity of any organization is to ensure competitiveness in market conditions in order to identify risk factors and ways to overcome them.

Decay Power Calculation for Safety Analysis of Innovative Reactor Systems

International Nuclear Information System (INIS)

Shwageraus, E.; Fridman, E.

2008-01-01

In this work, we verified the decay heat calculation capabilities of BGCore computer code system developed recently at Ben-Gurion University. Decay power was calculated for a typical UO 2 fuel in Pressurized Water Reactor environment using BGCore code and using procedure prescribed by the ANS/ANSI-2005 standard. Very good agreement between the two methods was obtained. Once BGCore calculation capabilities were verified, we calculated decay power as a function of time after shutdown for various reactors with innovative fuels, for which no standard procedure is currently available. Notable differences were observed for decay power of the advanced reactors as compared with conventional UO 2 LWR. The observed differences suggest that the design of new reactors safety systems must be based on corresponding decay power curves for each individual case in order to assure the desired performance of such systems. (authors)

Discovering Innovation at the Intersection of Undergraduate Medical Education, Human Factors, and Collaboration: The Development of a Nasogastric Tube Safety Pack.

Science.gov (United States)

Taylor, Natalie; Bamford, Thomas; Haindl, Cornelia; Cracknell, Alison

2016-04-01

Significant deficiencies exist in the knowledge and skills of medical students and residents around health care quality and safety. The theory and practice of quality and safety should be embedded into undergraduate medical practice so that health care professionals are capable of developing interventions and innovations to effectively anticipate and mitigate errors. Since 2011, Leeds Medical School in the United Kingdom has used case study examples of nasogastric (NG) tube patient safety incidents within the undergraduate patient safety curriculum. In 2012, a medical undergraduate student approached a clinician with an innovative idea after undertaking an NG tubes root cause analysis case study. Simultaneously, a separate local project demonstrated low compliance (11.6%) with the United Kingdom's National Patient Safety Agency NG tubes guideline for use of the correct method to check tube position. These separate endeavors led to interdisciplinary collaboration between a medical student, health care professionals, researchers, and industry to develop the Initial Placement Nasogastric Tube Safety Pack. Human factors engineering was used to inform pack design to allow guideline recommendations to be accessible and easy to follow. A timeline of product development, mapped against key human factors and medical device design principles used throughout the process, is presented. The safety pack has since been launched in five UK National Health Service (NHS) hospitals, and the pack has been introduced into health care professional staff training for NG tubes. A mixed-methods evaluation is currently under way in five NHS organizations.

Approaching Service Innovation Patterns

OpenAIRE

Andrea NAGY

2013-01-01

The present paper aims at analyzing the types of innovation in the field of services. First, the concept of innovation is defined and second, field literature is reviewed from the perspective of service innovation. The main types of innovation are identified based on several attempts at defining innovation, the most notable being Schumpeter’s. Thus, it is possible to approach concepts such as product and process innovation, incremental and radical innovation. Another aim has been to regard se...

Joint effects of job demands and job resources on vocational teachers’ innovative work behavior

NARCIS (Netherlands)

Messmann, G.; Stoffers, J.M.M.; Heijden, B.I.J.M. van der; Mulder, R.H.; Stoffers, J.; Mulder, R.

2017-01-01

PURPOSE - The purpose of this paper is to investigate interactions of job demands and job resources in the facilitation of innovative work behavior (IWB). In particular, the paper aims at researching interactive effects of psychological empowerment and participative safety and their potential to

Cool and Safe: Multiplicity in Safe Innovation at Unilever

Science.gov (United States)

Penders, Bart

2011-01-01

This article presents the making of a safe innovation: the application of ice structuring protein (ISP) in edible ices. It argues that safety is not the absence of risk but is an active accomplishment; innovations are not "made safe afterward" but "safe innovations are made". Furthermore, there are multiple safeties to be accomplished in the…

Decay Power Calculation for Safety Analysis of Innovative Reactor Systems

Energy Technology Data Exchange (ETDEWEB)

Shwageraus, E.; Fridman, E. [Department of Nuclear Engineering, Ben-Gurion University of the Negev Beer-Sheva 84105 (Israel)

2008-07-01

In this work, we verified the decay heat calculation capabilities of BGCore computer code system developed recently at Ben-Gurion University. Decay power was calculated for a typical UO{sub 2} fuel in Pressurized Water Reactor environment using BGCore code and using procedure prescribed by the ANS/ANSI-2005 standard. Very good agreement between the two methods was obtained. Once BGCore calculation capabilities were verified, we calculated decay power as a function of time after shutdown for various reactors with innovative fuels, for which no standard procedure is currently available. Notable differences were observed for decay power of the advanced reactors as compared with conventional UO{sub 2} LWR. The observed differences suggest that the design of new reactors safety systems must be based on corresponding decay power curves for each individual case in order to assure the desired performance of such systems. (authors)

Studies on the safety and transmutation behaviour of innovative fuels for light water reactors

International Nuclear Information System (INIS)

Schitthelm, Oliver

2012-01-01

Nuclear power plants contribute a substantial part to the energy demand in industry. Today the most common fuel cycle uses enriched uranium which produces plutonium due to its 238 U content. With respect to the long-term waste disposal Plutonium is an issue due to its heat production and radiotoxicity. This thesis consists of three main parts. In the first part the development and validation of a new code package MCBURN for spatial high resolution burnup simulations is presented. In the second part several innovative uranium-free and plutonium-burning fuels are evaluated on assembly level. Candidates for these fuels are a thorium/plutonium fuel and an inert matrix fuel consisting of plutonium dispersed in an enriched molybdenum matrix. The performance of these fuels is evaluated against existing MOX and enriched uranium fuels considering the safety and transmutation behaviour. The evaluation contains the boron efficiency, the void coefficient, the doppler coefficient and the net balances of every radionuclide. In the third part these innovative fuels are introduced into a German KONVOI reactor core. Considering todays approved usage of MOX fuels a partial loading of one third of innovative fuels and two third of classical uranium fuels was analysed. The efficiency of the plutonium depletion is determined by the ratio of the production of higher isotopes compared to the plutonium depletion. Todays MOX-fuels transmutate about 25% to 30% into higher actinides as Americium or Curium. In uranium-free fuels this ratio is about 10% due to the lack of additional plutonium production. The analyses of the reactor core have shown that one third of MOX fuel is not capable of a net reduction of plutonium. On the other hand a partial loading with thorium/plutonium fuel incinerates about half the amount of plutonium produced by an uranium only core. If IMF is used the ratio increases to about 75%. Considering the safety behavior all fuels have shown comparable results.

Innovation process and innovativeness of facility management organizations

NARCIS (Netherlands)

Mudrak, T.; Wagenberg, van A.F.; Wubben, E.F.M.

2005-01-01

Purpose - The innovation patterns and processes in facility management (FM) organizations are crucial for the development of FM as a discipline, but they are not yet fully explored and understood. This paper aims to clarify FM innovation from the perspective of innovation processes and the

H12: Examination of safety assessment aims, procedures and results from a wider perspective

International Nuclear Information System (INIS)

Neall, F.B; Smith, P.A.

2004-04-01

Safety assessment (SA) are a familiar tool for the evaluation of disposal concepts for radioactive waste. There is, however, often confusion in the wider community about the aims, methods and results used in SA. This report aims to present the H12 SA in a way that makes the assessment process clearer and the implications of the results more meaningful both to workers within the SA field and to a wider technical audience. The reasonableness of the assessment results, the quality of the models and databases and redundancy within the natural and engineered barrier system have been considered. A number of recent and somewhat older SAs that address a range of different waste types, host rocks and disposal concepts have been considered, and comparisons made to H12. A further aim is to put both doses and timescales in a more meaningful context. It has been necessary to: consider ways of demonstrating the meaningfulness of calculations that give results for many thousands of years in the future; provide a framework timescale as a context for SA results over long times; demonstrate the smallness of the risk associated with the doses by comparison with other radiological and non-radiological risks. The perception of risk, which is a critical issue for public acceptance of radioactive waste disposal and must be considered when seeking to present safety assessment results 'in perspective' to a wider audience, is also discussed. It is concluded that H12 is comparable in many ways to assessments carried out internationally. Some assumptions are somewhat arbitrary reflecting the generic stage of the Japanese programme, and are likely to become better founded in future exercises. Nevertheless, H12 provides a clear and well-founded message that it is feasible to site and construct a safe repository from HLW in Japan. (author)

Japan's ISER plant aims at inherent safety plus economy

International Nuclear Information System (INIS)

Kejv, L.

1987-01-01

Japan's ISER reactor concept, combining features of the sweden safety PIUS reactor with possibility of sufficient cost decrease, is briefly described. Comparative characteristics of two reactor concepts are presented

Incremental Innovation and Competitive Pressure in the Presence of Discrete Innovation

DEFF Research Database (Denmark)

Ghosh, Arghya; Kato, Takao; Morita, Hodaka

2017-01-01

Technical progress consists of improvements made upon the existing technology (incremental innovation) and innovative activities aiming at entirely new technology (discrete innovation). Incremental innovation is often of limited relevance to the new technology invented by successful discrete...

The NEA Nuclear Innovation 2050 Initiative

International Nuclear Information System (INIS)

Rayment, Fiona; ); Deffrennes, Marc; )

2017-01-01

The NEA launched its Nuclear Innovation 2050 (NI2050) Initiative with the aim of identifying research and development (R and D) strategies and associated priorities to achieve commercial readiness of innovative, sustainable nuclear fission technologies in a fast and cost-effective way. As defined at the beginning of the process, these R and D strategies would be elaborated with NEA stakeholders at large, in particular involving nearly all NEA committees, nuclear research organisations, industry, regulators and technical safety organisations. The NI2050 Initiative has evolved over the last year to become an NEA incubator for the selection and development of a number of large nuclear fission R and D programs (and infrastructures) that can support the role of nuclear energy in a low carbon future, mainly by accelerating innovation and the market deployment of technologies. This article provides a brief overview and the next steps of the initiative, which has reached the stage where more concrete outcomes might now be expected, in particular in terms of programs of action to be proposed for co-operative implementation

Antiviral Information Management System (AIMS): a prototype for operational innovation in drug development.

Science.gov (United States)

Jadhav, Pravin R; Neal, Lauren; Florian, Jeff; Chen, Ying; Naeger, Lisa; Robertson, Sarah; Soon, Guoxing; Birnkrant, Debra

2010-09-01

This article presents a prototype for an operational innovation in knowledge management (KM). These operational innovations are geared toward managing knowledge efficiently and accessing all available information by embracing advances in bioinformatics and allied fields. The specific components of the proposed KM system are (1) a database to archive hepatitis C virus (HCV) treatment data in a structured format and retrieve information in a query-capable manner and (2) an automated analysis tool to inform trial design elements for HCV drug development. The proposed framework is intended to benefit drug development by increasing efficiency of dose selection and improving the consistency of advice from US Food and Drug Administration (FDA). It is also hoped that the framework will encourage collaboration among FDA, industry, and academic scientists to guide the HCV drug development process using model-based quantitative analysis techniques.

Managing innovation complexity: About the co-existence of innovation types

OpenAIRE

Pohlmann, Philipp Adrian

2014-01-01

The purpose of this study is to contribute to the changing innovation management literature by providing an overview of different innovation types and organizational complexity factors. Aiming at a better understanding of effective innovation management, innovation and complexity are related to the formulation of an innovation strategy and interaction between different innovation types is further explored. The chosen approach in this study is to review the existing literature on different inn...

RESULTS OF ANALYSIS OF BENCHMARKING METHODS OF INNOVATION SYSTEMS ASSESSMENT IN ACCORDANCE WITH AIMS OF SUSTAINABLE DEVELOPMENT OF SOCIETY

Directory of Open Access Journals (Sweden)

A. Vylegzhanina

2016-01-01

Full Text Available In this work, we introduce results of comparative analysis of international ratings indexes of innovation systems for their compliance with purposes of sustainable development. Purpose of this research is defining requirements to benchmarking methods of assessing national or regional innovation systems and compare them basing on assumption, that innovation system is aligned with sustainable development concept. Analysis of goal sets and concepts, which underlie observed international composite innovation indexes, comparison of their metrics and calculation techniques, allowed us to reveal opportunities and limitations of using these methods in frames of sustainable development concept. We formulated targets of innovation development on the base of innovation priorities of sustainable socio-economic development. Using comparative analysis of indexes with these targets, we revealed two methods of assessing innovation systems, maximally connected with goals of sustainable development. Nevertheless, today no any benchmarking method, which meets need of innovation systems assessing in compliance with sustainable development concept to a sufficient extent. We suggested practical directions of developing methods, assessing innovation systems in compliance with goals of societal sustainable development.

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

The Conceptual Design of Innovative Safe PWR

Energy Technology Data Exchange (ETDEWEB)

Kim, Han-Gon [Centural Research Institute, Daejeon (Korea, Republic of); Heo, Sun [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-10-15

Most of countries operating NPPs have been performed post-Fukushima improvements as short-term countermeasure to enhance the safety of operating NPPs. Separately, vendors have made efforts on developing passive safety systems as long-term and ultimate countermeasures. AP1000 designed by Westinghouse Electric Company has passive safety systems including the passive emergency core cooling system (PECCS), the passive residual heat removal system (PRHRS), and the passive containment cooling system (PCCS). ESBWR designed by GE-Hitachi also has passive safety systems consisting of the isolation condenser system, the gravity driven cooling system and the PCCS. Other countries including China and Russia have made efforts on developing passive safety systems for enhancing the safety of their plants. In this paper, we summarize the design goals and main design feature of innovative safe PWR, iPOWER which is standing for Innovative Passive Optimized World-wide Economical Reactor, and show the developing status and results of research projects. To mitigate an accident without electric power and enhance the safety level of PWR, the conceptual designs of passive safety system and innovative safe PWR have been performed. It includes the PECCS for core cooling and the PCCS for containment cooling. Now we are performing the small scale and separate effect tests for the PECCS and the PCCS and preparing the integral effect test for the PECCS and real scale test for the PCCS.

Evaluating the implementation of health and safety innovations under a regulatory context: a collective case study of Ontario's safer needle regulation.

Science.gov (United States)

Chambers, Andrea; Mustard, Cameron A; Breslin, Curtis; Holness, Linn; Nichol, Kathryn

2013-01-22

Implementation effectiveness models have identified important factors that can promote the successful implementation of an innovation; however, these models have been examined within contexts where innovations are adopted voluntarily and often ignore the socio-political and environmental context. In the field of occupational health and safety, there are circumstances where organizations must adopt innovations to comply with a regulatory standard. Examining how the external environment can facilitate or challenge an organization's change process may add to our understanding of implementation effectiveness. The objective of this study is to describe implementation facilitators and barriers in the context of a regulation designed to promote the uptake of safer engineered medical devices in healthcare. The proposed study will focus on Ontario's safer needle regulation (2007) which requires healthcare organizations to transition to the use of safer engineered medical devices for the prevention of needlestick injuries. A collective case study design will be used to learn from the experiences of three acute care hospitals in the province of Ontario, Canada. Interviews with management and front-line healthcare workers and analysis of supporting documents will be used to describe the implementation experience and examine issues associated with the integration of these devices. The data collection and analysis process will be influenced by a conceptual framework that draws from implementation science and the occupational health and safety literature. The focus of this study in addition to the methodology creates a unique opportunity to contribute to the field of implementation science. First, the study will explore implementation experiences under circumstances where regulatory pressures are influencing the organization's change process. Second, the timing of this study provides an opportunity to focus on issues that arise during later stages of implementation, a phase

Safety regulation: The lessons of workplace safety rule management for managing the regulatory burden

OpenAIRE

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal regulations and reduce the regulatory burden. The authors were commissioned to prepare a discussion paper on this issue by the Mercatus Center of George Mason University in Arlington, Virginia, aimed pa...

Innovation through developing consumers communities. Part II: Digitalizing the innovation processes

Science.gov (United States)

Avasilcai, S.; Galateanu (Avram, E.

2015-11-01

The current research recognises the concept of innovation as the main driver for organisational growth and profitability. The companies seek to develop new ways to engage consumers and customers into co - creation value through the product design, development and distribution processes. However the main concern is manifested for new and creative ways of customization products based on consumers’ requirements and needs. Thus the need for innovative virtual instruments arose as the demand from social communities for personalised products or services increased. Basically companies should develop own innovative platforms, where consumers can participate, with ideas, concepts or other relevant contributions, and interact with designers or engineers for product development. This paper aims to present the most important features of platform development within BMW Group as a concept and as innovative instrument. From this point of view it is important to enhance past experiences of the company in the field of co - creation projects. There will be highlighted the dual consumers’ character as co - creator and co - evaluator based on their involvement in the proposed and developed projects and platform structure. The significant impact on platform functioning it has the diversity of company's concerns for Research & Development and innovation activities. From this point of view there will be assessed the platform structure, the main proposed themes and the evaluation process. The main outcome is to highlight the significance of platform development as innovative tool for consumers’ communities’ enhancement. Based on the analysis of “BMW Co-Creation Lab”, there will be revealed the main consumers concerns in terms of safety, comfort and appearance of the products. Thus it is important to understand the evaluation process of gathered ideas and intellectual property policy. The importance of platform development and implementation will be highlighted by company

Organising for innovation in regional innovation systems

DEFF Research Database (Denmark)

Brink, Tove

2017-01-01

The research in this paper reveals how organising the innovation ecosystem can enable the achievement of the aim for innovation and competiveness. The research was conducted from June 2014 to May 2015 using a qualitative deductive approach among operation & maintenance (O&M) actors in offshore wind...

Meeting the next generation PWR safety requirements: The EPR Reactor

International Nuclear Information System (INIS)

Salhi, Othman

2008-01-01

The development process pursued the harmonization of technical solutions and the integration of all the lessons learned from earlier nuclear plants built by both vendors. As far as safety more specifically is concerned, the basic choice for the EPR was to adopt an evolutionary approach based on experience feedback from the reactors built by Areva, which at the time already amounted to nearly 100. This philosophy makes today's Areva EPR the natural descendant of the most advanced French N4 and German Konvoi power reactors currently in operation. EPR design choices affecting safety were motivated by a continuous quest for higher levels of safety. A two-fold approach was followed: 1. improvement of the measures aimed at further reducing the already very low probability of core melt 2. incorporation of measures aimed at further limiting the consequences of a severe accident, in the knowledge that its probability of occurrence has been considerably reduced. Through its filiations with French N4 and German Konvoi power reactors, the EPR benefits from the uninterrupted, evolutionary innovation process that has supported the development of PWRs since their introduction into the market place. This is especially true for safety where the EPR brings a unique combination of both tried and tested and innovative features that further improve the prevention of severe accidents and their mitigation

Development Trends in Nuclear Technology and Related Safety Aspects

International Nuclear Information System (INIS)

Kuczera, B.; Juhn, P.E.; Fukuda, K.

2002-01-01

The IAEA Safety Standards Series include, in a hierarchical manner, the categories of Safety Fundamentals, Safety Requirements and Safety Guides, which define the elements necessary to ensure the safety of nuclear installations. In the same way as nuclear technology and scientific knowledge advance continuously, also safety requirements may change with these advances. Therefore, in the framework of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) one important aspect among others refers to user requirements on the safety of innovative nuclear installations, which may come into operation within the next fifty years. In this respect, the major objectives of the INPRO sub-task 'User Requirements and Nuclear Energy Development Criteria in the Area of Safety' have been: a. to overview existing national and international requirements in the safety area, b. to define high level user requirements in the area of safety of innovative nuclear technologies, c. to compile and to analyze existing innovative reactor and fuel cycle technology enhancement concepts and approaches intended to achieve a high degree of safety, and d. to identify the general areas of safety R and D needs for the establishment of these technologies. During the discussions it became evident that the application of the defence in depth strategy will continue to be the overriding approach for achieving the general safety objective in nuclear power plants and fuel cycle facilities, where the emphasis will be shifted from mitigation of accident consequences more towards prevention of accidents. In this context, four high level user requirements have been formulated for the safety of innovative nuclear reactors and fuel cycles. On this basis safety strategies for innovative reactor designs are highlighted in each of the five levels of defence in depth and specific requirements are discussed for the individual components of the fuel cycle. (authors)

Innovations in Post-Marketing Safety Research

NARCIS (Netherlands)

Stefánsdóttir, G.

2012-01-01

Safety surveillance is important during the entire life cycle of a drug. Pre-marketing trials have been shown to be ineffective in establishing the full safety profile of the drug, mainly due to their relatively small sample size and characteristics of the patients, which are usually younger and

Substantiation the strategic priorities of innovation regional development security

Directory of Open Access Journals (Sweden)

Irina Markovna Golova

2014-09-01

Full Text Available In this article are discussed methodological challenges for strategic priorities ensure security innovation regional development. It is shown that in modern conditions innovative safety is an independent and very important area of security of the region. This innovative security should be understood as a qualitative characteristic that gives insight into the regional socio-economic systems requirements and challenges of the innovation economy, including their ability to recombination. It is considered the basic patterns and features of mutual influence and interaction of innovative and traditional socio-economic development of the territories. The necessity of the joint integrated treatment of innovation and socio-economic development in the management of innovative safety of the region is founded. It is given suggestions on fundamental approaches to the solution of the problem of selecting priority areas for strengthening the sources of innovation development successfully tailored to specific territories. The main positions are illustrated in the example the regions of the Ural Federal District.

An innovative 3-D numerical modelling procedure for simulating repository-scale excavations in rock - SAFETI

Energy Technology Data Exchange (ETDEWEB)

Young, R. P.; Collins, D.; Hazzard, J.; Heath, A. [Department of Earth Sciences, Liverpool University, 4 Brownlow street, UK-0 L69 3GP Liverpool (United Kingdom); Pettitt, W.; Baker, C. [Applied Seismology Consultants LTD, 10 Belmont, Shropshire, UK-S41 ITE Shrewsbury (United Kingdom); Billaux, D.; Cundall, P.; Potyondy, D.; Dedecker, F. [Itasca Consultants S.A., Centre Scientifique A. Moiroux, 64, chemin des Mouilles, F69130 Ecully (France); Svemar, C. [Svensk Karnbranslemantering AB, SKB, Aspo Hard Rock Laboratory, PL 300, S-57295 Figeholm (Sweden); Lebon, P. [ANDRA, Parc de la Croix Blanche, 7, rue Jean Monnet, F-92298 Chatenay-Malabry (France)

2004-07-01

This paper presents current results from work performed within the European Commission project SAFETI. The main objective of SAFETI is to develop and test an innovative 3D numerical modelling procedure that will enable the 3-D simulation of nuclear waste repositories in rock. The modelling code is called AC/DC (Adaptive Continuum/ Dis-Continuum) and is partially based on Itasca Consulting Group's Particle Flow Code (PFC). Results are presented from the laboratory validation study where algorithms and procedures have been developed and tested to allow accurate 'Models for Rock' to be produced. Preliminary results are also presented on the use of AC/DC with parallel processors and adaptive logic. During the final year of the project a detailed model of the Prototype Repository Experiment at SKB's Hard Rock Laboratory will be produced using up to 128 processors on the parallel super computing facility at Liverpool University. (authors)

Evaluating the implementation of health and safety innovations under a regulatory context: A collective case study of Ontario’s safer needle regulation

Directory of Open Access Journals (Sweden)

Chambers Andrea

2013-01-01

Full Text Available Abstract Background Implementation effectiveness models have identified important factors that can promote the successful implementation of an innovation; however, these models have been examined within contexts where innovations are adopted voluntarily and often ignore the socio-political and environmental context. In the field of occupational health and safety, there are circumstances where organizations must adopt innovations to comply with a regulatory standard. Examining how the external environment can facilitate or challenge an organization’s change process may add to our understanding of implementation effectiveness. The objective of this study is to describe implementation facilitators and barriers in the context of a regulation designed to promote the uptake of safer engineered medical devices in healthcare. Methods The proposed study will focus on Ontario’s safer needle regulation (2007 which requires healthcare organizations to transition to the use of safer engineered medical devices for the prevention of needlestick injuries. A collective case study design will be used to learn from the experiences of three acute care hospitals in the province of Ontario, Canada. Interviews with management and front-line healthcare workers and analysis of supporting documents will be used to describe the implementation experience and examine issues associated with the integration of these devices. The data collection and analysis process will be influenced by a conceptual framework that draws from implementation science and the occupational health and safety literature. Discussion The focus of this study in addition to the methodology creates a unique opportunity to contribute to the field of implementation science. First, the study will explore implementation experiences under circumstances where regulatory pressures are influencing the organization's change process. Second, the timing of this study provides an opportunity to focus on issues

Cheap-GSHPs, an European project aiming cost-reducing innovations for shallow geothermal installations. - Geological data reinterpretation

Science.gov (United States)

Bertermann, David; Müller, Johannes; Galgaro, Antonio; Cultrera, Matteo; Bernardi, Adriana; Di Sipio, Eloisa

2016-04-01

The success and widespread diffusion of new sustainable technologies are always strictly related to their affordability. Nowadays the energy price fluctuations and the economic crisis are jeopardizing the development and diffusion of renewable technologies and sources. With the aim of both reduce the overall costs of shallow geothermal systems and improve their installation safety, an European project has took place recently, under the Horizon 2020 EU Framework Programme for Research and Innovation. The acronym of this project is Cheap-GSHPs, meaning "cheap and efficient application of reliable ground source heat exchangers and pumps"; the CHEAP-GSHPs project involves 17 partners among 9 European countries such Belgium, France, Germany, Greece, Ireland, Italy, Romania, Spain, Switzerland. In order to achieve the planned targets, an holistic approach is adopted, where all involved elements that take part of shallow geothermal activities are here integrated. In order to reduce the drilling specific costs and for a solid planning basis the INSPIRE-conformal ESDAC data set PAR-MAT-DOM ("parent material dominant") was analysed and reinterpreted regarding the opportunities for cost reductions. Different ESDAC classification codes were analysed lithologically and sedimentologically in order to receive the most suitable drilling technique within different formations. Together with drilling companies this geological data set was translated into a geotechnical map which allows drilling companies the usage of the most efficient drilling within a certain type of underground. The scale of the created map is 1: 100,000 for all over Europe. This leads to cost reductions for the final consumers. Further there will be the definition of different heat conductivity classes based on the reinterpreted PAR-MAT-DOM data set which will provide underground information. These values will be reached by sampling data all over Europe and literature data. The samples will be measured by several

Are Technology Interruptions Impacting Your Bottom Line? An Innovative Proposal for Change.

Science.gov (United States)

Ledbetter, Tamera; Shultz, Sarah; Beckham, Roxanne

2017-10-01

Nursing interruptions are a costly and dangerous variable in acute care hospitals. Malfunctioning technology equipment interrupts nursing care and prevents full utilization of computer safety systems to prevent patient care errors. This paper identifies an innovative approach to nursing interruptions related to computer and computer cart malfunctions. The impact on human resources is defined and outcome measures were proposed. A multifaceted proposal, based on a literature review, aimed at reducing nursing interruptions is presented. This proposal is expected to increase patient safety, as well as patient and nurse satisfaction. Acute care hospitals utilizing electronic medical records and bar-coded medication administration technology. Nurses, information technology staff, nursing informatics staff, and all leadership teams affected by technology problems and their proposed solutions. Literature from multiple fields was reviewed to evaluate research related to computer/computer cart failures, and the approaches used to resolve these issues. Outcome measured strategic goals related to patient safety, and nurse and patient satisfaction. Specific help desk metrics will demonstrate the effect of interventions. This paper addresses a gap in the literature and proposes practical and innovative solutions. A comprehensive computer and computer cart repair program is essential for patient safety, financial stewardship, and utilization of resources. © 2015 Wiley Periodicals, Inc.

Applying open source innovation approaches in developing business innovation

DEFF Research Database (Denmark)

Aagaard, Annabeth; Lindgren, Peter

2015-01-01

and managed effectively in developing business model innovation. The aim of this paper is therefore to close this research gap and to provide new knowledge within the research field of OI and OI applications. Thus, in the present study we explore the facilitation and management of open source innovation...... in developing business model innovation in the context of an international OI contest across five international case companies. The findings reveal six categories of key antecedents in effective facilitation and management of OI in developing business model innovation.......More and more companies are pursuing continuous innovation through different types of open source innovation and across different partners. The growing interest in open innovation (OI) originates both from the academic community as well as amongst practitioners motivating further investigation...

Innovation Processes and Entrepreneurial Culture for Radical Innovations

Directory of Open Access Journals (Sweden)

Ľubica Knošková

2015-02-01

Full Text Available To survive and prosper, the organizations need to embed the processes and mechanisms to discover major technology and consumer trends and respond to them through new growth areas. Based on profound literature review providing insight into organizational factors that affect firms’ ability to manage innovation this paper asks which innovation processes and entrepreneurial culture support radical innovations. The aim of the paper is to specify the company behaviour that leads to innovative outputs with high level of novelty in country specific context of Slovakia. We conducted two-stage empirical research in 2009 and 2014 mapping companies’ approach to innovation management during the last 10 years. After surveying 102 firms in the first stage and 287 firms in the second stage we derive success factors for radical innovations. The findings demonstrate growing importance of corporate strategic orientation, highly developed innovation processes and parallel mechanisms for radical innovation, ability to manage internally and externally open innovation and support entrepreneurial culture. This study makes unique contribution to the understanding of innovation processes, organizational factors, and their significance and dynamics. It should attract managerial attention to recognize the importance of innovation management factors for building firm’s innovation competency.

Fire safety of historical buildings traditional versus innovative “behavioural design” solutions by using wayfinding systems

CERN Document Server

Bernardini, Gabriele

2017-01-01

This book applies a behavioral point of view to individuals’ fire safety in historic buildings. It outlines theoretical and operative issues, based on recent studies and international guidelines. Firstly, critical issues for Building Heritage fire safety are widely discussed, by including the modelling of human factor and man-environment-fire interference in these architectural spaces. A significant part of the book includes a discussion on emergency modeling and simulation. A source code for representing the fire evacuation process (including man-evacuation facilities interactions) is offered to the reader. Methods for effectiveness assessment of risk-reducing solutions are provided and tested in a case-study. Being a structured approach to occupants-related problems during a fire in heritage buildings, it offers an innovative methodology and practical examples that researchers and designers can use as a guide when proposing and testing solutions. Evaluation indexes for effectiveness assessment (also usefu...

How innovation drivers, networking and leadership shape public sector innovation capacity

DEFF Research Database (Denmark)

Lewis, Jenny M; Ricard, Lykke Margot; Klijn, Erik Hans

2017-01-01

The need to understand innovation in public sector environments is growing. There is also a need to build theory, test it empirically and compare across jurisdictions. This article aims to understand the factors that have an impact on innovation capacity. It examines the self-rated innovation cap...

CONSIDERATIONS ABOUT THE ESSENTIAL FEATURES OF INNOVATION

Directory of Open Access Journals (Sweden)

Geanina S. BANU

2014-11-01

Full Text Available Defining and classifying innovation represents a complex approach both theoretical and practical. While comprising various views, the innovation concept is permanently redefined according to various criteria. Nevertheless, approaching innovation generic features should be always considered as defining the core of innovation as a concept. The aim of the present paper is to perform a literature review identifying the essential features of innovation with the aim of providing a comprehensive and holistic view of the concept. Furthermore, the present article aims at delivering a theoretical guide on innovation. To this end, the review comprises definition of concept, classification, risk factors, innovation systems and measuring indicators.

Innovation as Road Safety Felicitator

Science.gov (United States)

Sahoo, S.; Mitra, A.; Kumar, J.; Sahoo, B.

2018-03-01

Transportation via Roads should only be used for safely commuting from one place to another. In 2015, when 1.5 Million people, across the Globe started out on a journey, it was meant to be their last. The Global Status Report on Road Safety, 2015, reflected this data from 180 countries as road traffic deaths, worldwide. In India, more than 1.37 Lakh[4] people were victims of road accidents in 2013 alone. That number is more than the number of Indians killed in all the wars put together. With these disturbing facts in mind, we found out some key ambiguities in the Indian Road Traffic Management systems like the non-adaptive nature to fluctuating traffic, pedestrians and motor vehicles not adhering to the traffic norms strictly, to name a few. Introduction of simple systems would greatly erase the effects of this silent epidemic and our Project aims to achieve the same. It would introduce a pair of Barricade systems to cautiously separate the pedestrians and motor vehicles to minimise road mishaps to the extent possible. Exceptional situations like that of an Ambulance or any emergency vehicles will be taken care off by the use of RFID tags to monitor the movement of the Barricades. The varied traffic scenario can be guided properly by using the ADS-B (Automatic Detection System-Broadcast) for monitoring traffic density according to the time and place.

China's Innovation Paradox

Science.gov (United States)

Chan, Jeremy

2015-01-01

China aims to become an innovation-led nation by 2020, but its leadership is generally sceptical--and oftentimes hostile--to the market forces, open exchange of ideas, and creative destruction that have unlocked innovation in other countries. Instead, Beijing hopes to promote innovation in China through a massive expansion in higher education,…

Fundamentals of Melt-Water Interfacial Transport Phenomena: Improved Understanding for Innovative Safety Technologies in ALWRs

Energy Technology Data Exchange (ETDEWEB)

M. Anderson; M. Corradini; K.Y. Bank; R. Bonazza; D. Cho

2005-04-26

The interaction and mixing of high-temperature melt and water is the important technical issue in the safety assessment of water-cooled reactors to achieve ultimate core coolability. For specific advanced light water reactor (ALWR) designs, deliberate mixing of the core-melt and water is being considered as a mitigative measure, to assure ex-vessel core coolability. The goal of this work is to provide the fundamental understanding needed for melt-water interfacial transport phenomena, thus enabling the development of innovative safety technologies for advanced LWRs that will assure ex-vessel core coolability. The work considers the ex-vessel coolability phenomena in two stages. The first stage is the melt quenching process and is being addressed by Argonne National Lab and University of Wisconsin in modified test facilities. Given a quenched melt in the form of solidified debris, the second stage is to characterize the long-term debris cooling process and is being addressed by Korean Maritime University in via test and analyses. We then address the appropriate scaling and design methodologies for reactor applications.

Fundamentals of Melt-Water Interfacial Transport Phenomena: Improved Understanding for Innovative Safety Technologies in ALWRs

International Nuclear Information System (INIS)

Anderson, M.; Corradini, M.; Bank, K.Y.; Bonazza, R.; Cho, D.

2005-01-01

The interaction and mixing of high-temperature melt and water is the important technical issue in the safety assessment of water-cooled reactors to achieve ultimate core coolability. For specific advanced light water reactor (ALWR) designs, deliberate mixing of the core-melt and water is being considered as a mitigative measure, to assure ex-vessel core coolability. The goal of this work is to provide the fundamental understanding needed for melt-water interfacial transport phenomena, thus enabling the development of innovative safety technologies for advanced LWRs that will assure ex-vessel core coolability. The work considers the ex-vessel coolability phenomena in two stages. The first stage is the melt quenching process and is being addressed by Argonne National Lab and University of Wisconsin in modified test facilities. Given a quenched melt in the form of solidified debris, the second stage is to characterize the long-term debris cooling process and is being addressed by Korean Maritime University in via test and analyses. We then address the appropriate scaling and design methodologies for reactor applications

Innovational Leadership in School Management

Directory of Open Access Journals (Sweden)

Mahmut Sagir

2017-05-01

Full Text Available This study aimed at examining school administrators’ innovational leadership behaviors and the level of practicing these behaviors. The study was designed using the descriptive model since it aimed to identify school administrators’ innovative behaviors and approaches in school management. School Management Innovational Leadership Scale (SMILES developed (2016 by the researcher was used in the study as the data collection instrument. Data was collected from 111 school administrators and 346 teachers during the 2015-2016 academic teaching year. According to the research results, school administrators’ innovational leadership behaviors are collected under three factors; "Encouraging Innovation", "Pursuing Innovation", and "Implementing Innovation".It was found that school administrators mostly show the innovational leadership behaviors expressed in the three factors and in the total scale. It was expressed in the study that compared to females; males believe that school administrators show more innovational leadership behaviors. Also, compared to participants with graduate degrees, participants with undergraduate degrees believe that school administrators show more innovational leadership behaviors. At the same time, compared to teachers, school administrators believe that they show more innovational leadership behaviors.

Innovation and environmental risk

International Nuclear Information System (INIS)

Roberts, L.; Weale, A.

1991-01-01

This book assembles the opinions of a number of authors to examine the issue of environmental impact and risk associated with innovation. Public, industrial and government responses to new technological developments are considered with respect to pesticides, genetic engineering, food technology and radiation protection. On the one hand innovation promises and delivers great benefits to society, but on the other hand it is increasingly perceived as a threat to the health and safety of its citizens and to the environment. This dilemma lead to a conference to discuss the benefits and risks of innovation. Papers given at the conference have been included in this book after discussion and revision. (UK)

Online Innovation

DEFF Research Database (Denmark)

Vujovic, Sladjana; Ulhøi, John Parm

2008-01-01

  Purpose - The aim of this paper is to investigate the role of online networking during the innovation process, including its role(s) in communication, cooperation and coordination. The paper neither implicitly assumes that online computer-based networking is a prerequisite for the innovation...... process nor denies the possibility that innovation can emerge and successfully survive without it. It merely presupposes that, in cases of innovation where information and communication technologies play a substantial role, non-proprietarity may offer an interesting alternative to innovations based...... on proprietary knowledge. Design/methodology/approach - The paper borrows from the theory of communities-of-practice, which takes into account social relations, contacts, and the transfer and incorporation of knowledge. Open source innovation is not the exclusive preserve of computer nerds, but also has...

Combined Innovation Policy: Linking Scientific and Practical Knowledge in Innovation Systems

OpenAIRE

Isaksen, Arne; Nilsson, Magnus

2013-01-01

New research indicates that firms combining the science-based STI (Science, Technology, Innovation) and the experience-based DUI (Doing, Using, Interacting) modes of innovation are more efficient when it comes to improving innovation capacity and competitiveness. With regard to innovation policy, the STI mode calls for a supply driven policy, typically aimed to commercialise research results. The DUI mode suggests a demand driven policy approach, such as supporting the development of new prod...

Corporate Innovation and Entrepreneurial Development | Iyayi ...

African Journals Online (AJOL)

This paper aimed at a theoretical exposition of the influence of corporate innovation on entrepreneurial development. To achieve this purpose a review of extant literature on innovation and creativity, concept of corporate innovation process of corporate innovation, approaches to corporate innovation, corporate innovation ...

Partner Selection for Open Innovation

Directory of Open Access Journals (Sweden)

Marina Z. Solesvik

2013-04-01

Full Text Available In this article, we consider open innovation from the perspectives of: i causation and effectuation, and ii social networking. Our empirical evidence consists of a case study of a late-stage open-innovation project aimed at creating a hybrid ship that uses liquid natural gas and hydrogen as power sources. The results show that the effectuation approach is preferable to open innovation when the initiator of open innovation aims to keep sensitive information inside the closed group, when the initiator has established an effective team of representatives from other firms from earlier innovation projects, and when the participants are geographically close.

An Innovative Multimedia Approach to Laboratory Safety

Science.gov (United States)

Anderson, M. B.; Constant, K. P.

1996-01-01

A new approach for teaching safe laboratory practices has been developed for materials science laboratories at Iowa State university. Students are required to complete a computerized safety tutorial and pass an exam before working in the laboratory. The safety tutorial includes sections on chemical, electrical, radiation, and high temperature safety. The tutorial makes use of a variety of interactions, including 'assembly' interactions where a student is asked to drag and drop items with the mouse (either labels or pictures) to an appropriate place on the screen (sometimes in a specific order). This is extremely useful for demonstrating safe lab practices and disaster scenarios. Built into the software is a record tracking scheme so that a professor can access a file that records which students have completed the tutorial and their scores on the exam. This paper will describe the development and assessment of the safety tutorials.

Business Process Innovation using the Process Innovation Laboratory

DEFF Research Database (Denmark)

Møller, Charles

for practical applications has not been identified. The aim of this paper is to establish a conceptual framework for business process innovation in the supply chain based on advanced enterprise systems. The main approach to business process innovation in this context is to create a new methodology for exploring...... process models and patterns of applications. The paper thus presents a new concept for business process innovation called the process innovation laboratory a.k.a. the ?-Lab. The ?-Lab is a comprehensive framework for BPI using advanced enterprise systems. The ?-Lab is a collaborative workspace...... for experimenting with process models and an explorative approach to study integrated modeling in a controlled environment. The ?-Lab facilitates innovation by using an integrated action learning approach to process modeling including contemporary technological, organizational and business perspectives....

Passive safety optimization in liquid-sodium cooled reactors

International Nuclear Information System (INIS)

Cahalan, J. E.; Hahn, D.; Chang, W.-P.; Kwon, Y.-M.; Nuclear Engineering Division; Korea Atomic Energy Research Inst.

2004-01-01

This report summarizes the results of a three-year collaboration between Argonne National Laboratory (ANL) and the Korea Atomic Energy Research Institute (KAERI) to identify and quantify the performance of innovative design features in metallic-fueled, sodium-cooled fast reactor designs. The objective of the work was to establish the reliability and safety margin enhancements provided by design innovations offering significant potential for construction, maintenance, and operating cost reductions. The project goal was accomplished with a combination of advanced model development (Task 1), analysis of innovative design and safety features (Tasks 2 and 3), and planning of key safety experiments (Task 4)

Description of data-sources used in SafetyCube, Deliverable 3.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Hagström, L. Thomson, R. Hermitte, T. Weijermars, W. Bos, N. Talbot, R. Thomas, P. Dupont, E. Martensen, H. Bauer, R. Hours, M. Høye, E. Jänsch, M. Murkovic, A. Niewöhner, W. Papadimitriou, E. Pérez, C. Phan, V. Usami, D. & Vázquez-de-Prada, J.

2017-01-01

Safety CaUsation, Benefits and Efficiency (SafetyCube) is a European Commission supported Horizon 2020 project with the objective of developing an innovative road safety Decision Support System (DSS) that will enable policy-makers and stakeholders to select and implement the most appropriate

[Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

Science.gov (United States)

Bohnet-Joschko, Sabine; Kientzler, Fionn

2010-01-01

Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

Innovational Leadership in School Management

OpenAIRE

Mahmut Sagir

2017-01-01

This study aimed at examining school administrators’ innovational leadership behaviors and the level of practicing these behaviors. The study was designed using the descriptive model since it aimed to identify school administrators’ innovative behaviors and approaches in school management. School Management Innovational Leadership Scale (SMILES) developed (2016) by the researcher was used in the study as the data collection instrument. Data was collected from 111 school administrators and 346...

Incentivizing primary care providers to innovate: building medical homes in the post-Katrina New Orleans safety net.

Science.gov (United States)

Rittenhouse, Diane R; Schmidt, Laura A; Wu, Kevin J; Wiley, James

2014-02-01

To evaluate safety-net clinics' responses to a novel community-wide Patient-Centered Medical Home (PCMH) financial incentive program in post-Katrina New Orleans. Between June 2008 and June 2010, we studied 50 primary care clinics in New Orleans receiving federal funds to expand services and improve care delivery. Multiwave, longitudinal, observational study of a local safety-net primary care system. Clinic-level data from a semiannual survey of clinic leaders (89.3 percent response rate), augmented by administrative records. Overall, 62 percent of the clinics responded to financial incentives by achieving PCMH recognition from the National Committee on Quality Assurance (NCQA). Higher patient volume, higher baseline PCMH scores, and type of ownership were significant predictors of achieving NCQA recognition. The steepest increase in adoption of PCMH processes occurred among clinics achieving the highest, Level 3, NCQA recognition. Following NCQA recognition, 88.9 percent stabilized or increased their use of PCMH processes, although several specific PCMH processes had very low rates of adoption overall. Findings demonstrate that widespread PCMH implementation is possible in a safety-net environment when external financial incentives are aligned with the goal of practice innovation. © Health Research and Educational Trust.

What is the impact of innovation on output in healthcare with a special focus on treatment innovations in radiotherapy? A literature review.

Science.gov (United States)

Jacobs, Maria; Boersma, Liesbeth; Dekker, Andre; Swart, Rachelle; Lambin, Philippe; de Ruysscher, Dirk; Verhaegen, Frank; Stultiens, Joost; Ramaekers, Bram; van Merode, Frits

2017-11-01

To analyse how often innovations in healthcare are evaluated regarding output, especially in radiotherapy. Output was defined as either survival, toxicity, safety, service, efficiency or cost-effectiveness. A systematic literature review was conducted, using three search strategies: (1) innovations in general healthcare; (2) radiotherapy-specific innovations, i.e. organizational innovations and general implementation of innovations; (3) innovations per tumour group/radiotherapy technique. Scientific levels were classified according to the system used in European Society for Medical Oncology guidelines. Finally, we calculated the percentage of implemented innovations in Dutch radiotherapy centres for which we found evidence regarding output in the literature review. Only 94/1072 unique articles matched the inclusion criteria. Significant results on patient outcome, service or safety were reported in 65% of papers, which rose to 76% if confined to radiotherapy reviews. A significant technological improvement was identified in 26%, cost-effectiveness in 10% and costs/efficiency in 36% of the papers. The scientific level of organizational innovations was lower than that of clinical papers. Dutch radiotherapy treatment innovations were adequately evaluated on outcome data before implementation in clinical routine in a minimum of 64-92% of cases. Only few studies report on output when considering innovations in general, but radiotherapy reviews give a reasonably good insight into innovation output effects, with a higher level of evidence. In Dutch radiotherapy centres only small improvements are possible regarding evaluation of treatment innovations before implementation. Advances in knowledge: This study is the first of its kind measuring how innovations are evaluated in scientific literature, before implementation in clinical practice.

A Schumpeterian perspective on service innovation

DEFF Research Database (Denmark)

Drejer, Ina

Decades after services outdistanced manufacturing from an employment perspective, manufacturing has continued to dominate economic analyses, including innovation studies. As a reaction to this a new strand of service innovation studies has emerged within the last decade. These studies do not aim...... to compare innovation in services directly with innovation in manufacturing, rather they aim a studying distinctive features of service innovation. This has among other things resulted in the development of new, service-specific innovation concepts. However, as this paper seeks to demonstrate, these concepts...... imply a merging of actual innovation with activities such as learning and codification of knowledge. Whereas learning and codification of knowledge are closely related to innovation, the inclusion of activities that e.g. require or result in learning, but neither result in new products, processes...

2011 John M. Eisenberg Patient Safety and Quality Awards. The effect of a novel Housestaff Quality Council on quality and patient safety. Innovation in patient safety and quality at the local level.

Science.gov (United States)

Fleischut, Peter M; Faggiani, Susan L; Evans, Adam S; Brenner, Samantha; Liebowitz, Richard S; Forese, Laura; Kerr, Gregory E; Lazar, Eliot J

2012-07-01

In 2008 New York-Presbyterian Hospital (NYP)/Weill Cornell Medical Center, New York City, the largest not-for-profit, nonsectarian hospital in the United States, created and implemented a novel approach--the Housestaff Quality Council (HQC)--to engaging house-staff in quality and patient safety activities. The HQC represented an innovative collaboration between the housestaff, the Department of Anesthesiology, the Division of Quality and Patient Safety, the Office of Graduate Medical Education, and senior leadership. As key managers of patient care, the housestaff sought to become involved in the quality and patient safety decision- and policy-making processes at the hospital. Its members were determined to decrease or minimize adverse events by facilitating multimodal communication, ensuring smart work flow, and measuring outcomes to determine best practices. The HQC, which also included frontline hospital staff or managers from areas such as nursing, pharmacy, and information technology, aligned its initiatives with those of the division of quality and patient safety and embarked on two projects--medication reconciliation and use of the electronic medical record. More than three years later, the resulting improvements have been sustained and three new projects--hand hygiene, central line-associated bloodstream infections, and patient handoffs--have been initiated. The HQC model is highly replicable at other teaching institutions as a complementary approach to their other quality and patient safety initiatives. However, the ability to sustain positive momentum is dependent on the ability of residents to invest time and effort in the face of a demanding residency training schedule and focus on specialty-specific clinical and research activities.

The Demon-Angel method in systematic safety assessment

International Nuclear Information System (INIS)

Vassakis, A.G.

1999-01-01

Since 'design for safety' of large engineering systems with a high level of innovation requires an exhaustive safety analysis and since a subsequent corrective action may become a very large bottleneck in improving such a system, fundamental knowledge in designing safe systems is essential. The lack of any 'rule of thumb' makes such knowledge a matter of personal experience rather than the subject of an academic course. This paper proposes a new method for the theoretical safety study of different system configurations independently of any particular application. This method aims to help the construction of a 'rule of thumb' for what is a safe system and what is not. The Demon and Angel ideas are explained and the schematic presentation of these elements is introduced. Four representative case studies demonstrate the use of this method

Innovation Policy in European Union

Directory of Open Access Journals (Sweden)

Marta-Christina Suciu

2006-11-01

Full Text Available The innovation policies aim to analyze priority factors shaping innovative performance and to reflect the increasing appreciation of the economic and social importance of innovation. This paper is commissioned to examine topics of current interest or concern to innovation policy-makers in Europe. Based on literature and the framework of the European Action Plan for Innovation, this paper investigates different levels and fields of European innovational systems and practices.

Mentoring Top Leadership Promotes Organizational Innovativeness through Psychological Safety and Is Moderated by Cognitive Adaptability.

Science.gov (United States)

Moore, James H; Wang, Zhongming

2017-01-01

Mentoring continues to build momentum among startups and established enterprises due to its positive impact on individuals and organizations. Unlike previous studies, this research focuses on mentoring higher level leadership, such as the CEO, and demonstrates its unique relationship to organizational innovativeness. Our sample included 200 mentored executives and entrepreneurs who personally identify and exploit opportunities. Our findings confirm that mentoring top leaders positively relates to their perceived innovativeness of the organization and that the relationship is mediated by these leaders' perception of psychological safety within the organization. Our findings also confirm that the relationship is negatively moderated by these leaders' cognitive adaptability. The reliability and validity of the results have been proved by using confirmatory factor analysis and advanced regression analytics. As a result, this work demonstrates the value of mentoring top leadership and advocates the importance of establishing a psychologically safe environment to inspire not only top leadership to try new avenues but also for all those within the organization to speak up and speak out. Additionally, our findings encourage organizations to proactively and selectively prioritize mentoring among top leadership, taking into account their differing levels of cognitive adaptability. Finally, further research could focus on how to provide greater support for mentors of higher level leaders.

77 FR 24560 - National Highway Traffic Safety Administration Electric Vehicle Safety Technical Symposium

Science.gov (United States)

2012-04-24

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration Electric Vehicle... discuss safety considerations for electric vehicles powered by lithium-ion (Li-ion) batteries. The... vehicles. Electric vehicles show great promise as an innovative and fuel- efficient option for American...

Diabetes Health Information Technology Innovation to Improve Quality of Life for Health Plan Members in Urban Safety Net

Science.gov (United States)

Ratanawongsa, Neda; Handley, Margaret A.; Sarkar, Urmimala; Quan, Judy; Pfeifer, Kelly; Soria, Catalina; Schillinger, Dean

2014-01-01

Safety net systems need innovative diabetes self-management programs for linguistically diverse patients. A low-income government-sponsored managed care plan implemented a 27-week automated telephone self-management support (ATSM) / health coaching intervention for English, Spanish-, and Cantonese-speaking members from four publicly-funded clinics in a practice-based research network. Compared to waitlist, immediate intervention participants had greater 6-month improvements in overall diabetes self-care behaviors (standardized effect size [ES] 0.29, pimproving patient-reported self-management and may also improve some outcomes. PMID:24594561

Technological Innovation, R & D Activities and Innovation System Between Organizations

Directory of Open Access Journals (Sweden)

Jonas Pedro Fabris

2015-08-01

Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

Trends on R and D of the innovative nuclear reactors in Japan

International Nuclear Information System (INIS)

Kinoshita, Izumi

2002-01-01

In Japan, since LWRs introduced from U.S.A. began their business operations one by one from 1970 and 1971, their scale-up were carried out, to reach, at present, a condition on developments of ABWR-2 of 1700 MW class in output and APWR+. They are on a line of large scale LWR development aiming at further upgrading of their economical efficiency, safety, operability and maintenance by improving and developing conventional reactors. On the other hand, an innovative small scale reactor capable of siting at proximity of its markets and flexibly responsible to needs, a low decelerated spectrum reactor intending to effectively use the resources, an super-critical pressure reactor aiming at upgrading of thermal efficiency, a high temperature gas reactor aiming at hydrogen production using nuclear heat , and so on, and so forth, are investigated at a number of institutes. And, on the fast breeder reactor, some innovative investigations such as small-scale reactor, reactor using coolant except metal sodium, and so on, in addition to development of sodium cooling large-scale reactor, under the 'Actual use strategy survey research' progressed at a center of the Japan Nuclear Cycle Development Institute, are promoted. Here were outlined on trends of R and D on various innovative reactors under classification of water cooling reactor, gas cooling reactor, and liquid metal cooling reactor. (G.K.)

Progress and status of the international project on innovative nuclear reactors and fuel cycles (INPRO) - 5182

International Nuclear Information System (INIS)

Ponomarev, A.; Fesenko, G.; Grigoriev, F.G.; Korinny, A.; Phillips, J.R.; Rho, K.

2015-01-01

The IAEA's International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) was established in 2000 through IAEA General Conference resolution. INPRO cooperates with Member States to ensure that sustainable nuclear energy is available to help meet the energy needs of the 21. century. INPRO membership has grown to 41 members and 16 observers. The paper presents the current prospectus of the INPRO programme and details the most recent achievements in the following 7 projects: 1) the GAINS project (Global Architecture of Innovative Nuclear Energy Systems with thermal and fast reactors and a closed nuclear fuel cycle); 2) the SYNERGIES project applies and amends the analytical framework developed in GAINS project to examine more specifically the various forms of regional collaboration among nuclear energy suppliers and users; 3) the KIND project (Key Indicators for Innovative Nuclear Energy Systems) has the objective of developing guidance on the evaluation on innovative nuclear technologies; 4) the ROADMAPS project addresses several possible stages toward nuclear energy sustainability; 5) the RISC project aims at demonstrating that the evolution of safety requirements and technical innovations provide continual progress towards the avoidance of evacuation measures outside NPP sites in case of severe accidents; 6) the FANES project has the objective of carrying out feasibility analyses of advanced and innovative fuels for different reactor systems; and 7) the WIRAF project aims at identifying problematic waste from innovative reactor designs and corresponding nuclear fuel cycles

Team innovation climate and knowledge sharing among healthcare managers: mediating effects of altruistic intentions.

Science.gov (United States)

Liu, Feng-Chuan; Cheng, Kai-Lin; Chao, Minston; Tseng, Hsu-Min

2012-01-01

This paper aims to provide empirical evidence concerning the impact of team climate on knowledge sharing behavior and the mediating effects of individuals' altruistic intentions in the context of healthcare settings. Questionnaire data were collected from 212 administrators employed at a medical center in Taiwan. Team climate was assessed by the Team Climate Inventory composed of four factors, participative safety, support for innovation, vision, and task orientation. The proposed hypotheses were tested using structural equation modeling. The influence of the team innovation climate on knowledge sharing behavior was evident. Furthermore, individuals' altruistic intentions played a full mediating role in the relationship between team innovation climate and knowledge sharing behavior. These results contribute to the field of the people-orientated perspective in knowledge management. The full mediating effect of employees' altruistic intentions provides healthcare team managers the direction to accelerate knowledge sharing behavior.

Technical modifications and management innovations in exporting nuclear reactor projects

International Nuclear Information System (INIS)

Mao Xiaoming; Qin Xijiu; Ding Hu; Xue Zhaoqun; Wen Shengjun

2009-01-01

As a main channel for the foreign economic cooperation of China nuclear industry, China Zhongyuan Engineering Corporation (CZEC) has been constantly engaged in technical modifications and management innovations in its exporting nuclear reactor projects. In the implementation of heavy water research reactor contract in Algeria, CZEC had established a complete and adequate design standards system in compliance with the international standards, and made significant modifications to the reference reactor in the aspects of reactor power and reactor safety, solved quite some technical issues which-affected the reactor technical performance. The modifications and improvements enabled the technical parameters, safety features, reactor multipurpose application to attain to the advanced level in the world. In the 300 MWe PWR NPPs in Pakistan, safety features had been updated in line with upgrading regulatory requisites. The design philosophy and technology application demonstrated CZEC' s creation and innovation on basis of constant safety enhancement of nuclear power projects. Efforts had also been made by CZEC' s creation and innovation on basis of constant safety enhancement of nuclear power projects. Efforts had also been made by CZEC in promoting China made equipment items and components exportation. (authors)

Innovations in Rural Financial Services Provision

DEFF Research Database (Denmark)

Ndyetabula, Daniel; Temu, Andrew E.

2013-01-01

The aim of at investigating innovations related to financial services for the agri-bussiness sector, suing examples from Tanzania......The aim of at investigating innovations related to financial services for the agri-bussiness sector, suing examples from Tanzania...

47{sup th} Annual conference on nuclear technology (AMNT 2016). Key topics / Outstanding know-how and sustainable innovations - enhanced safety and operation excellence

Energy Technology Data Exchange (ETDEWEB)

Raetzke, Christian [CONLAR - Consulting on Nuclear Law, Licensing and Regulation, Leipzig (Germany); Fischer, Erwin [PreussenElektra GmbH, Hannover (Germany). Management Board; Mohrbach, Ludger [VGB PowerTech e.V., Essen (Germany). Competence Center ' ' Nuclear Power Plants' '

2016-08-15

Summary report on the Key Topics ''Outstanding Know-How and Sustainable Innovations'' and ''Enhanced Safety and Operation Excellence'' of the 47{sup th} Annual Conference on Nuclear Technology (AMNT 2016) held in Hamburg, 10 to 12 May 2016. Other Sessions of AMNT 2016 will be covered in further issues of atw.

Innovative use of technologies and methods to redesign care: the problem of care transitions.

Science.gov (United States)

Richman, Mark; Sklaroff, Laura Myerchin; Hoang, Khathy; Wasson, Elijah; Gross-Schulman, Sandra

2014-01-01

Organizations are redesigning models of care in today's rapidly changing health care environment. Using proven innovation techniques maximizes likelihood of effective change. Our safety-net hospital aims to reduce high emergency department visit, admission, and readmission rates, key components to health care cost control. Twenty-five clinical stakeholders participated in mixed-methods innovation exercises to understand stakeholders, frame problems, and explore solutions. We identified existing barriers and means to improve post-emergency department/post-inpatient discharge care coordination/communication among patient-centered medical home care team members, including patients. Physicians and staff preferred automated e-mail notifications, including patient identifiers, medical home/primary care provider information, and relevant clinical documentation, to improve communication efficiency/efficacy.

Assessing safety culture using RADAR matrix

International Nuclear Information System (INIS)

Mariscal-Saldana, M. a.; Garcia-Herrero, S.; Toca-Otero, A.

2009-01-01

Santa Maria de Garona nuclear power plant, in collaboration with Burgos University, has proceeded to conduct a pilot project aimed at seeing the possibilities for the RADAR (Results, Approach, Development, Assessment and review) logic of EFQM model, as a tool for self evaluation of Safety Culture in a nuclear power plant. In the work it has sought evidences of Safety culture implanted in the plant, and identify strengths and areas for improvement regarding this Culture. the score obtained by analyzing these strengths and areas for improvements has served to prioritize actions implemented. The nuclear power plant has been submitted voluntarily to the mission SCART (Safety Culture Assessment Review Team), an international review being done for the first time in the world at a plant in operation and the team of experts led by International Agency of Atomic Energy (IAEA) has identified this project as a good practice, an innovative process implemented in the plant, that must be transmitted to other plants. (Author) 10 refs

Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

Directory of Open Access Journals (Sweden)

Jana Filová

2015-12-01

Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

Understanding the innovation adoption process of construction clients, Clients driving Innovation

NARCIS (Netherlands)

Hartmann, Andreas; Dewulf, Geert P.M.R.; Reymen, Isabelle; Adams, L.; Guest, K.

2006-01-01

Although the role of clients in stimulating construction innovation seems to be controversial, little has been known about their innovation adoption behaviour. This paper presents first results of an ongoing research project the aim of which is to shed more light on the adoption processes of

How innovation drivers, networking and leadership shape public sector innovation capacity

NARCIS (Netherlands)

J.M. Lewis (Jenny M.); L.M. Ricard (Lykke Margot); E-H. Klijn (Erik-Hans)

2017-01-01

textabstractThe need to understand innovation in public sector environments is growing. There is also a need to build theory, test it empirically and compare across jurisdictions. This article aims to understand the factors that have an impact on innovation capacity. It examines the self-rated

EUROSAFE Forum 2010. Towards convergence of technical nuclear safety practices in Europe

International Nuclear Information System (INIS)

2010-01-01

The EUROSAFE forum 2010 covered the following technical plenary presentations: the future of innovation in organizations; obstacles to innovative engineering; the challenge of introducing innovation to processes and regulations; TSO's approach to innovation - combining research, operational feedback experience and knowledge management; innovation and safety - necessity or contradiction? safe rail traffic control. Seminars were held on the following topics: Seminar 1: nuclear installation safety; Seminar 2: radiation protection and environment; Seminar 3: waste management; seminar 4: nuclear security.

Everyday-Oriented Innovation

DEFF Research Database (Denmark)

Munnecke, Max

The exploration of radical innovation has long been regarded as fundamental to business growth. In the 21st century, modern organisations increasingly seek to combine business innovation with the broader goal to confront social and environmental challenges. Vision projects are related phenomena...... which explore and map radical innovation opportunities within everyday activities. The aim of a vision project is to produce an innovation map that can empower an organisation to navigate between potential innovation opportunities and pro‐actively confront modern challenges for the benefit of people......, business, and society. The study addresses the concern that vision projects do not produce sufficient navigational innovation maps, and seeks to improve their quality by modelling a new methodological framework. The study was conducted as a series of four research cycles which modelled and experimented...

INNOVATION OF AIRPORTS AND AERODROMES IN TRANSPORT

Directory of Open Access Journals (Sweden)

Tomasz BALCERZAK

2016-03-01

Full Text Available The paper attempts to characterize changes occurring in EU transport policy, taking into account innovation of airports and aerodromes. To face challenges like: increase in air traffic, ensuring safety of flight operations, regional development or requirements of passengers it is necessary to determine desired direction network of airports and aerodromes within the aviation policy, which is part of the national and European transport policy. Overview of national and EU studies, strategies and legislative plans enable to specify changes taking place in the EU aviation policy, as well as to create potential scenarios of its development with particular attention to the innovation of aerodromes and airports. Based on the above analysis it should be noted, that aims of the European institutions and agencies are: reduction amount of restrictive rules on general aviation (including GA aerodromes, spread concepts of multimodality and Small Aircraft Transport Systems, enhance competitiveness of the EU aviation sector but also reduction investment funding at airports. Conclusions may be a theoretical inspiration in the process of updating master plans of aerodromes and airports.

The safety case for a HLW repository in Opalinus clay: aims, methodology, first results

International Nuclear Information System (INIS)

Zuidema, Piet

2002-01-01

Piet Zuidema (Nagra, Switzerland) described the development of the safety case for a high level waste repository in Opalinus clay in which canisters would be placed in large vaults. The current phase of work was concerned with demonstrating the feasibility of the disposal concept. The Safety Case is taken to mean a set of arguments to support a statement that the proposed facility will meet relevant safety criteria and will include arguments giving the basis for confidence that those arguments are correct and properly taking account of uncertainties. The safety strategy was concerned both with the inherent robustness of the disposal concept and the adequacy of the assessment capability. As regards the former, the arguments being advanced were primarily qualitative. Key issues in terms of the documentation of the Safety Case were traceability and transparency of information, including how to ensure that key arguments did not become obscured because of the need to make available very large quantities of information

Using Co-innovation to Stimulate Innovation in the New Zealand Agricultural Sector

NARCIS (Netherlands)

Botha, N.; Klerkx, L.W.A.; Small, B.; Turner, J.A.

2014-01-01

A recently implemented research and development program; Co-learning and Coinnovation to Achieve Impact in New Zealand’s Biological Industries (Primary Innovation for short) aims to stimulate innovation in the New Zealand agricultural sector, which is an important contributor to the New Zealand

IAEA safety standards and approach to safety of advanced reactors

International Nuclear Information System (INIS)

Gasparini, M.

2004-01-01

The paper presents an overview of the IAEA safety standards including their overall structure and purpose. A detailed presentation is devoted to the general approach to safety that is embodied in the current safety requirements for the design of nuclear power plants. A safety approach is proposed for the future. This approach can be used as reference for a safe design, for safety assessment and for the preparation of the safety requirements. The method proposes an integration of deterministic and risk informed concepts in the general frame of a generalized concept of safety goals and defence in depth. This methodology may provide a useful tool for the preparation of safety requirements for the design and operation of any kind of reactor including small and medium sized reactors with innovative safety features.(author)

THE CONTRIBUTION OF INNOVATION SYSTEMS AND ORGANIZATIONAL CULTURE FOR INNOVATION GENERATION

Directory of Open Access Journals (Sweden)

Elaine da Silva

2018-04-01

Full Text Available Introduction: Emphasizes the role of innovation in the Information and Knowledge Society as a favorable element of developing regional, national and global levels. Objective: The aim is reflect about the coming of innovation in the context of production systems and their respective role for the development of society. Methodology: The research sets up a qualitative approach to literature and exploratory nature. Results: As from selected literature review, presents conceptual aspects of innovation in the context of production systems and analyzes its contribution to the national innovation system and the role of organizational culture focused on innovation. Conclusions: Think about innovation from the systemic approach, based on the interaction of the different relevant agents to influence and contribute to the generation of innovation is fundamental in the current conjuncture, characterized by the agility of the transformations in social, economic, political and technological contexts.

Innovation through accelerators: A case for open innovation

Directory of Open Access Journals (Sweden)

Lerato E. Mohalajeng

2016-12-01

Full Text Available Background: Open innovation is becoming a progressive business practice in Southern Africa because it plays a significant role in economic development through promoting the commercialisation of new ideas. The challenge is that while the benefits of open innovation are widely spoken about, not much is understood about the challenges and successes of open innovation accelerators (OIAs in taking ideas to market. Aim: The purpose of this research was to investigate an OIA in South Africa for taking ideas to market. Setting: The Innovation Hub is a science park in Pretoria, South Africa, using open innovation to stimulate entrepreneurship in South Africa. Through The Innovation Hub Open IX, a webbased platform, an opportunity to investigate the bridging from invention to commercialisation is presented. Methods: A qualitative research method using semi-structured, in-depth interviews was applied to collect data. Five key stakeholders of the OIA were interviewed. Results: The findings suggest that stakeholder buy-in is essential for commercialisation through OIAs in South Africa. By involving stakeholders in the initial phases of the open innovation process, the likelihood of a solution being incorporated and fitted into the organisation’s business strategy is increased. Conclusion: The insight gained from this research suggests policymakers, research institutions and commercial businesses ought to explore various innovations across industries relevant to their open innovation proficiencies. This research makes a significant contribution to an indepth understanding of what is needed to bridge the gap from invention to successful commercialisation through open innovation.

Four innovations for building a modern in-situ leaching mine

International Nuclear Information System (INIS)

Su Xuebin; Tang Qingsi; Wang Shunli

2014-01-01

The connotation and signification of four innovations carried out by Tongliao Uranium Co., Ltd., CNNC, were introduced. The four innovations involved science and technology progress, system and mechanism, safety and environmental protection, and cooperation mode. Through innovations, key technical problems were solved, a project management mode of 'small core with big cooperation' was established, a high-efficient talent team was set up on the basis of 'new project with new mechanism', the first uranium mining enterprise by CO 2 + O 2 in-situ leaching process was set up in accordance with advanced safety and environmental protection concept, and the corporation between Tongliao Uranium Co., Ltd. (CNNC) and Liaohe Petroleum Exploration Co., Ltd., was promoted. (authors)

WHETHER OPEN INNOVATION IS A BETTER CHOICE AS A MODEL OF INNOVATION FOR ORGANIZATIONS?

OpenAIRE

KANBUR, AYSUN; A. H. MOHAMED, Ibrahim

2018-01-01

This studypresents a review of innovation models and by taking consideration andexamining these models it is aimed to understand whether the model based onopen innovation is a better choice among all the other models. Fororganizations, innovation models generally demonstrate how to work in aninnovative point of view. Companies of today’s business life are striving todevelop their capabilities and their activities to become innovative companies.Many of the organizations try to find the most su...

Self-reliance and innovation of Qinshan phase II NPP project

International Nuclear Information System (INIS)

Ye Qizhen; Yang Lanhe

2007-01-01

This article mainly describes the self-reliance and innovation of Qinshan nuclear power project of phase II, in-between it contains new reactor core design, as well as related experimental and calculation analysis, especially for new reactor design produced fluid-induced vibration model test, theoretical analysis and testing in-built reactor; aiming at two-loop NSSS a series improvement made for safety systems and related safety analysis to enhance their reliability and redundancy; according to specialty of two-loop NSSS an optimization made for NPP parameters and design of related equipments, for the purpose to make the output of NPP maximal; design of main reactor building and T-G building also improved according to characteristics of two-loop NSSS and site conditions. CRDM and refueling machine are researched and manufactured on base of self-reliance, their performance are better than design requirements, large portion of key equipments are localized through different way. In construction first time realized the integrated erection of containment dome. During the commissioning non-nuclear steam driving of T-G set, as well as 500 kV high voltage rising using emergent diesel generator, etc. are carried out.In period of operation still continuous innovation and improvement are made, so that to keep the good record of operation. (authors)

Passive Safety Systems in Advanced Water Cooled Reactors (AWCRS). Case Studies. A Report of the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO)

International Nuclear Information System (INIS)

2013-09-01

This report presents the results from the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) collaborative project (CP) on Advanced Water Cooled Reactor Case Studies in Support of Passive Safety Systems (AWCR), undertaken under the INPRO Programme Area C. INPRO was launched in 2000 - on the basis of a resolution of the IAEA General Conference (GC(44)/RES/21) - to ensure that nuclear energy is available in the 21st century in a sustainable manner, and it seeks to bring together all interested Member States to consider actions to achieve innovation. An important objective of nuclear energy system assessments is to identify 'gaps' in the various technologies and corresponding research and development (R and D) needs. This programme area fosters collaboration among INPRO Member States on selected innovative nuclear technologies to bridge technology gaps. Public concern about nuclear reactor safety has increased after the Fukushima Daiichi nuclear power plant accident caused by the loss of power to pump water for removing residual heat in the core. As a consequence, there has been an increasing interest in designing safety systems for new and advanced reactors that are passive in nature. Compared to active systems, passive safety features do not require operator intervention, active controls, or an external energy source. Passive systems rely only on physical phenomena such as natural circulation, thermal convection, gravity and self-pressurization. Passive safety features, therefore, are increasingly recognized as an essential component of the next-generation advanced reactors. A high level of safety and improved competitiveness are common goals for designing advanced nuclear power plants. Many of these systems incorporate several passive design concepts aimed at improving safety and reliability. The advantages of passive safety systems include simplicity, and avoidance of human intervention, external power or signals. For these reasons, most

The economics of nuclear power: four essays on the role of innovation and industrial organization

International Nuclear Information System (INIS)

Berthelemy, Michel

2013-01-01

This thesis studies the role of innovation and industrial structures in the nuclear power sector. The analysis of innovation is based on the use of patent data as a measure of innovation effort. On the one hand, we study the determinants of innovation and, on the other hand, its impact on operating and safety performance of existing nuclear reactors and on construction costs. We show that nuclear safety regulation can induce innovation and improve safety performance, but at the same time contributes to increases in construction costs. The analysis of the role of industrial structures allows us to study the impact of learning by doing opportunities both for construction and operation of reactors, as well as the effect of electricity market liberalization on operating performance. In particular, we show that the divestiture of electricity production and distribution activities induces a substantial improvement in the availability of nuclear reactors. (author)

Creativity and Innovation in Health Care: Tapping Into Organizational Enablers Through Human-Centered Design.

Science.gov (United States)

Zuber, Christi Dining; Moody, Louise

There is an increasing drive in health care for creativity and innovation to tackle key health challenges, improve quality and access, and reduce harm and costs. Human-centered design (HCD) is a potential approach to achieving organizational innovation. However, research suggests the nursing workforce feels unsupported to take the risks needed for innovation, and leaders may not understand the conditions required to fully support them. The aim of this study was to identify enabling conditions that support frontline nurses in their attempts to behave as champions of innovation and change. An HCD workshop was undertaken with 125 nurses employed in clinical practice at Kaiser Permanente. The workshop included empathy mapping and semistructured questions that probed participant experiences with innovation and change. The data were collated and thematic analysis undertaken through a Grounded Theory approach. The data were analyzed to identify key enabling conditions. Seven enablers emerged: personal need for a solution; challenges that have meaningful purpose; clarity of goal and control of resources; active experimentation; experiences indicating progress; positive encouragement and confidence; and provision of psychological safety. These enablers were then translated into pragmatic guidelines for leaders on how the tools of HCD may be leveraged for innovation and change in health care.

Cross-border innovation cooperation

DEFF Research Database (Denmark)

Hjaltadóttir, Rannveig Edda; Makkonen, Teemu; Sørensen, Nils Karl

2017-01-01

Finding a suitable partner is paramount for the success of innovation cooperation. Thus, this paper sets out to analyse the determinants of cross-border innovation cooperation in Denmark by focusing on partner selection. The aim of the article is to investigate determinants of partner selection...... by taking the location of the partners into account. In particular, the discussion is tied to the notion of varying knowledge bases firms utilize in their innovation creation processes. Firm level data from the 2010 Community Innovation Survey in Denmark was utilized to analyse cross-border innovation...... of innovativeness increase the likelihood of cross-border innovation cooperation. Accordingly, geographical proximity to international borders is found to have a significant, positive effect on selecting partners within the European Union. The multivariate probit model shows that the decision of choosing a domestic...

Do non-profit sport organisations innovate? Types and preferences of service innovation within regional sport federations

NARCIS (Netherlands)

Winand, M.; Scheerder, J.; Vos, S.B.; Zint, T.

2016-01-01

Little is known about innovation in the non-profit sport sector. The current research addresses this gap by questioning whether and to what extent sport federations innovate. It aims to identify types of innovation implemented by sport federations and their attitude and preferences towards

Innovation Pilot – to Improve Innovation Competences of Engineering Students

DEFF Research Database (Denmark)

Løje, Hanne; Grex, Sara

2017-01-01

In the future, there will be increasing demands for skilled and well-educated engineers who are capable of developing new solutions through innovation and can work in multidisciplinary teams. Therefore the universities are developing innovation and entrepreneurship programs to improve...... the innovation competences of the engineering students to meet this demand. In this paper, we will discuss how to improve innovation competences of engineering students and describe how it is done in a newly developed course at the Technical University of Denmark (DTU). The aim of the course is to strengthened...... innovation skills in addition to personal and interpersonal skills. This is done in close collaboration with companies. The outline for the course is that the students work in multidisciplinary teams with specific challenges offered by the companies. The main findings so far show the importance of the use...

Value innovations in accordance to Apple

OpenAIRE

Mertl, Jiří

2011-01-01

This bachelor's thesis is aimed at comparison of value management way of innovations and innovations according to Apple. At the first part there are analyzed theoretical, methodical and practical aspects of both of ways. Key theme for value innovation is value for customer, which is analyzed from both points of view value management and Apple. Except of product innovations there are mentioned for example marketing innovations or process innovations. In last part of the thesis there are demons...

Proceedings of the NEA International Workshop on the Nuclear Innovation road-map (NI2050)

International Nuclear Information System (INIS)

Ha, Jaejoo HA; Deffrennes, Marc; ); Tromm, Walter; Ait Abderrahim, Hamid; Fernandez Fernandez, Alberto; Speranzini, Robert; Jeong, Ik; Lee, Gye Seok; Castelao Lopez, Carlos; Pasamehmetoglu, Kemal; Puska, Eija Karita; Cordier, Pierre-Yves; Horvath, Akos; Agostini, Pietro; Kamide, Hideki; Nakatsuka, Toru; Roelofs, Ferry; Wrochna, Grzegorz; Zezula, Lubor; Rayment, Fiona; Cizelj, Leon; Zimmermann, Martin A.; Schmitz, Bruno; Martin-Ramos, Manuel; Andreeva-Andrievskaya, Lyudmila N.; Monti, Stefano; ); Paillere, Henri; ); Caron-Charles, Marylise; Gulliford, Jim; ); Breest, Axel; ); McGrath, Margaret; Bignan, Gilles

2015-07-01

The two-day workshop held at the OECD Headquarters in Paris on 7-8 July 2015, brought together some of the leading experts in the field of nuclear fission research, development and demonstration. The purpose was to launch the NEA Nuclear Innovation 2050 Initiative, aiming, after a first survey phase, at producing a road-map of main priority research programmes and infrastructures necessary to support the role nuclear energy may play in the low carbon power sector of the future. This might then further lead to some ad-hoc cooperation frameworks that help to effectively implement key priorities coming out of the road-mapping. The workshop was organised into the following five sessions: 1 - Opening session on NI2050: vision and main objectives; 2 - National presentations on nuclear fission research and innovation activities (programmes, infrastructures, budgets); 3 - Presentations on some existing international nuclear fission road-maps and co-operation frameworks; 4 - Defining the way forward for NI2050: survey, road-mapping and priorities and co-operation; 5 - Open discussion. These proceedings bring together the available presentations (slides) given during the workshop: 1. Opening session on NI2050: vision and main objectives: Setting the scene: NEA/IEA Nuclear Energy road-map 2050 (Jaejoo Ha); Proposed scope and organisation of the NI2050 project launching, taking stock of the IEA Energy RD and D survey and going further (Marc Deffrennes); 2. National presentations on nuclear fission research and innovation activities (programmes, infrastructures, budgets): Overview of German Situation with focus on HGF NUSAFE - HELMHOLTZ (W. Tromm); Investing in Nuclear Innovation in Belgium - SCKCEN (Hamid Ait Abderrahim and Alberto Fernandez); Canadian Nuclear Laboratories: Nuclear S and T and Innovation (R. Speranzini); ROK's Nuclear Policies and R and D Programs - KAERI (Ik Jeong and Lee Gye Seok); R and D Spanish Nuclear Platform (C. Castelao); NOE-NE Programs and

Organising to Enable Innovation

DEFF Research Database (Denmark)

Brink, Tove

2016-01-01

The purpose of this conceptual paper is to reveal how organising can enable innovation across organisational layers and organisational units. This approach calls for a cross-disciplinary literature review. The aim is to provide an integrated understanding of innovation in an organisational approach....... The findings reveal a continous organising process between individual/ team creativity and organisational structures/control to enable innovation at firm level. Organising provides a dynamic approach and contains the integrated reconstruction of creativity, structures and boundaries for enhanced balance...... of explorative and exploitative learning in uncertain environments. Shedding light on the cross-disciplinary theories to organise innovation provides a contribution at the firm level to enable innovation....

Organizational Downsizing and Innovation

OpenAIRE

Richtnér, Anders; Åhlström, Pär

2006-01-01

Companies implementing a downsizing strategy aiming at increasing cost efficiency and operational effectiveness may face the fact that their innovative ability is hampered. In this paper, we develop a model of the mechanisms through which organizational downsizing affects innovation. We use existing theory to develop propositions regarding the details of how and why organizational downsizing affects innovation. Our model contains three components: a) the organization’s stock of knowledge, b) ...

Assessment of Innovation and Performance in the Fruit Chain; The Innovation-Performance Matrix

NARCIS (Netherlands)

Trienekens, J.H.; Uffelen, van R.L.M.; Debaire, J.; Omta, S.W.F.

2008-01-01

Purpose - This paper aims to bridge the concepts of innovation and performance and to develop a framework to assess innovation and performance in food chains. Design/methodology/approach - Based on an extensive literature search the paper identifies critical success factors (CSFs) and related

User requirements for innovative nuclear reactors and fuel cycle technologies in the area of economics, environment, safety, waste management, proliferation resistance and cross cutting issues, and methodology for innovative technologies assessment

International Nuclear Information System (INIS)

Kupitz, Juergen; Depisch, Frank; Allan, Colin

2003-01-01

The IAEA General Conference in 2000 has invited ''all interested Member States to combine their efforts under the aegis of the Agency in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology''. In response to this invitation, the IAEA initiated an ''International Project on Innovative Nuclear Reactors and Fuel Cycles'', INPRO. The overall objectives of INPRO is to help to ensure that nuclear energy is available to contribute in fulfilling in a sustainable manner energy needs in the 21st century, and to bring together all interested Member States, both technology holders and technology users, to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles that use sound and economically competitive technology. Phase-I of INPRO was initiated in May 2001. During Phase-I, work was subdivided in two sub phase: Phase 1A (finished in June 2003) and Phase 1B (started in June 2003). Phase 1A dealt with the definition of Basic Principles, User Requirements and Criteria, and the development of a methodology for the evaluation of innovative nuclear technologies. In Phase 1A, task groups for several areas were established: (a) Prospects and Potentials of Nuclear Power, (b) Economics; (c) Sustainability and Environment, (d) Safety of Nuclear Installations, (e) Waste Management, (f) Proliferation Resistance, (g) Crosscutting issues and (h) for the Methodology for Assessment. In Phase-IB evaluations of innovative nuclear energy technologies will be performed by Member States against the INPRO Basic Principles, User Requirements and Criteria. This paper summarizes the results achieved in the Phase 1A of INPRO and is a cooperative effort of the INPRO team, consisting of all INPRO cost free experts and task managers. (author)

Innovation capacity in the public sector

DEFF Research Database (Denmark)

Lewis, Jenny; Ricard, Lykke Margot

The aim of this paper is to establish a framework for the comparative analysis of the four cases (municipalities), which will link innovation environments (governance structures, social networks and leadership qualities) to innovation capacity and innovativeness. It begins with a discussion of in...

Methods for open innovation on a genome-design platform associating scientific, commercial, and educational communities in synthetic biology.

Science.gov (United States)

Toyoda, Tetsuro

2011-01-01

Synthetic biology requires both engineering efficiency and compliance with safety guidelines and ethics. Focusing on the rational construction of biological systems based on engineering principles, synthetic biology depends on a genome-design platform to explore the combinations of multiple biological components or BIO bricks for quickly producing innovative devices. This chapter explains the differences among various platform models and details a methodology for promoting open innovation within the scope of the statutory exemption of patent laws. The detailed platform adopts a centralized evaluation model (CEM), computer-aided design (CAD) bricks, and a freemium model. It is also important for the platform to support the legal aspects of copyrights as well as patent and safety guidelines because intellectual work including DNA sequences designed rationally by human intelligence is basically copyrightable. An informational platform with high traceability, transparency, auditability, and security is required for copyright proof, safety compliance, and incentive management for open innovation in synthetic biology. GenoCon, which we have organized and explained here, is a competition-styled, open-innovation method involving worldwide participants from scientific, commercial, and educational communities that aims to improve the designs of genomic sequences that confer a desired function on an organism. Using only a Web browser, a participating contributor proposes a design expressed with CAD bricks that generate a relevant DNA sequence, which is then experimentally and intensively evaluated by the GenoCon organizers. The CAD bricks that comprise programs and databases as a Semantic Web are developed, executed, shared, reused, and well stocked on the secure Semantic Web platform called the Scientists' Networking System or SciNetS/SciNeS, based on which a CEM research center for synthetic biology and open innovation should be established. Copyright © 2011 Elsevier Inc

Dissemination material template, Deliverable 2.2 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Tros, M. & Houtenbos, M.

2016-01-01

Safety CaUsation, Benefits and Efficiency (SafetyCube) is a European Commission supported Horizon 2020 project with the objective of developing an innovative road safety Decision Support System (DSS) that will enable policy-makers and stakeholders to select and implement the most appropriate

Product Innovations in Emerging Economies

DEFF Research Database (Denmark)

Xiao, Xiao; Sarker, Saonee; Rai, Sudhanshu

2011-01-01

, such as countries that are not considered “developed.” This study aims at examining how firms innovate in emerging economies. Specifically, we focus on the role of collaborative capacity in product innovations. Primary data collected from an ICT project in India has been used to test the relevant hypotheses......Studies on enterprise innovations have established the relationships between a number of determinants and enterprise innovativeness. However, such studies in general have been conducted in developed economies. Recent literature has called for broadening innovation-related research to other contexts...

Influences on the adoption of patient safety innovation in primary care: a qualitative exploration of staff perspectives.

Science.gov (United States)

Litchfield, Ian; Gill, Paramjit; Avery, Tony; Campbell, Stephen; Perryman, Katherine; Marsden, Kate; Greenfield, Sheila

2018-05-22

Primary care is changing rapidly to meet the needs of an ageing and chronically ill population. New ways of working are called for yet the introduction of innovative service interventions is complicated by organisational challenges arising from its scale and diversity and the growing complexity of patients and their care. One such intervention is the multi-strand, single platform, Patient Safety Toolkit developed to help practices provide safer care in this dynamic and pressured environment where the likelihood of adverse incidents is increasing. Here we describe the attitudes of staff toward these tools and how their implementation was shaped by a number of contextual factors specific to each practice. The Patient Safety Toolkit comprised six tools; a system of rapid note review, an online staff survey, a patient safety questionnaire, prescribing safety indicators, a medicines reconciliation tool, and a safe systems checklist. We implemented these tools at practices across the Midlands, the North West, and the South Coast of England and conducted semi-structured interviews to determine staff perspectives on their effectiveness and applicability. The Toolkit was used in 46 practices and a total of 39 follow-up interviews were conducted. Three key influences emerged on the implementation of the Toolkit these related to their ease of use and the novelty of the information they provide; whether their implementation required additional staff training or practice resource; and finally factors specific to the practice's local environment such as overlapping initiatives orchestrated by their CCG. The concept of a balanced toolkit to address a range of safety issues proved popular. A number of barriers and facilitators emerged in particular those tools that provided relevant information with a minimum impact on practice resource were favoured. Individual practice circumstances also played a role. Practices with IT aware staff were at an advantage and those previously

Supporting innovation in the food sector

DEFF Research Database (Denmark)

Grunert, Klaus G.

2006-01-01

A major aim for our research is to contribute to the continued innovativeness of the Danish and European food sectors. Innovation is the key to future competitiveness - and a major task for research is to provide the foundations for innovativeness in the food chain....

Finland: Innovation Policy Tools under National Innovation System Crisis

Directory of Open Access Journals (Sweden)

Daria A. Vorobeva

2017-01-01

Full Text Available Purpose: the for a long time Finland’s national innovation system (NIS had been being one of the most successful and effective in the world. But some years ago the situation changed: Finland’s NIS run into system crisis. And today Finnish government tries to work out anticrisis innovation policy. So the purpose of this article is to show up the innovation policy instruments which are able put an end to the crisis and to determine conditions of their successful use. Methods: the article is based on the national innovation systems concept and government policy-mix aimed at the NIS development. Results: the authors show up how Finnish government looks for optimal policy-mix to overcome the crisis, demonstrate in details complementary components of the relevant innovation policy, describe conditions for their success and effectiveness to consider whether they are useful in other countries. Conclusions and Relevance: to overcome the NIS crisis the Finnish government uses such instruments as strategic programs of socio-economic development with targets which can’t be achieved without adequate high technology and innovative development complemented by incentives to make business innovate actively. The conditions of such policy success are: 1 such feature of Finnish society as all stakeholders of economic development consensus on one issue: the main factor of development are innovations; 2 anticrisis stage of Finnish innovative policy is based previously accumulated knowledge and know-how. 

Preapplication safety evaluation report for the Power Reactor Innovative Small Module (PRISM) liquid-metal reactor

International Nuclear Information System (INIS)

Donoghue, J.E.; Donohew, J.N.; Golub, G.R.; Kenneally, R.M.; Moore, P.B.; Sands, S.P.; Throm, E.D.; Wetzel, B.A.

1994-02-01

This preapplication safety evaluation report (PSER) presents the results of the preapplication desip review for die Power Reactor Innovative Small Module (PRISM) liquid-mew (sodium)-cooled reactor, Nuclear Regulatory Commission (NRC) Project No. 674. The PRISM conceptual desip was submitted by the US Department of Energy in accordance with the NRC's ''Statement of Policy for the Regulation of Advanced Nuclear Power Plants'' (51 Federal Register 24643). This policy provides for the early Commission review and interaction with designers and licensees. The PRISM reactor desip is a small, modular, pool-type, liquid-mew (sodium)-cooled reactor. The standard plant design consists of dim identical power blocks with a total electrical output rating of 1395 MWe- Each power block comprises three reactor modules, each with a thermal rating of 471 MWt. Each module is located in its own below-grade silo and is co to its own intermediate heat transport system and steam generator system. The reactors utilize a metallic-type fuel, a ternary alloy of U-Pu-Zr. The design includes passive reactor shutdown and passive decay heat removal features. The PSER is the NRC's preliminary evaluation of the safety features in the PRISM design, including the projected research and development programs required to support the design and the proposed testing needs. Because the NRC review was based on a conceptual design, the PSER did not result in an approval of the design. Instead it identified certain key safety issues, provided some guidance on applicable licensing criteria, assessed the adequacy of the preapplicant's research and development programs, and concluded that no obvious impediments to licensing the PRISM design had been identified

Open innovation competence : towards a competence profile for inter-organizational collaboration innovation teams

OpenAIRE

Chatenier, du, E.

2009-01-01

Global competition and specialisation have resulted in an innovation trend called ‘open innovation’, in which companies develop new products, services or markets collaboratively, by using each others’ know-how, technology, licenses, brands or market channels. A complex form of open innovation is pooled R&D or co-development in strategic partnerships, i.e., open innovation teams. These partnerships embody mutual working relationships between two or more parties aimed at creating and delive...

International Innovation Cooperation with a View to Innovative Development

Directory of Open Access Journals (Sweden)

Kramarenko Ruslan M.

2016-02-01

Full Text Available Currently the process of globalization in the field of scientific, technical and industrial activity continues to grow. Countries conclude bilateral and multilateral agreements to facilitate cooperation in scientific research and co-financing of capital-intensive innovation projects. Combining competitive advantages of companies is motivated by the government’s policy with respect to attracting foreign direct investments and entering new markets. Despite some discomfort of countries of the world caused by the outflow of knowledge abroad and disturbance of the equilibrium of the trade balance, most of the countries of the OECD have scientific and economic benefits from these transactions. The processes associated with innovations are constantly in the focus of attention of local and foreign experts and are reflected in their works. The aim of the article is to analyze the impact of international integration interaction of countries of the world on innovative development. The forms of internationalization of innovation activities have been analyzed. The main vector of the modern global competition based on scientific and technological achievements and innovations has been determined. The main directions of the internationalization of innovation activities have been revealed and justified

Successful innovation by motivation

Directory of Open Access Journals (Sweden)

Petra Koudelková

2015-10-01

Full Text Available Innovation is one of the most important factors for business growth. Human capital plays a significant role in the successful process of innovation. This article deals with employee motivation in the innovation process and the main scientific aim of this study is to present results of research that was undertaken in the Czech Republic at the beginning of 2013. Questionnaires were used for the survey and statistical analyses such as Chi square test or Hierarchical cluster analysis were used for data processing. This study also provides a theoretical and practical overview of business innovation in the Czech Republic.

Teaching innovation is social interaction

DEFF Research Database (Denmark)

Petersen, Monika Hoeck; Olsen, Bente

2015-01-01

The paper aims to explore how teaching practitioners teach innovation – by cross comparing the local nursing college innovation program and the innovation teaching at the bachelor program in Mechatronic engineering at the local University; to explore and develop attention points in understanding ...... that emerging entrepreneurial attitudes are linked to the social processes of interaction between the participants of teachers and students....

Exploring the impact of transformational leadership on nurse innovation behaviour: a cross-sectional study.

Science.gov (United States)

Weng, Rhay-Hung; Huang, Ching-Yuan; Chen, Li-Mei; Chang, Li-Yu

2015-05-01

This study explored the influences of transformational leadership on nurse innovation behaviour and the mediating role of organisational climate. Recently, global nursing experts have been aggressively encouraging nurses to pursue innovation in nursing in order to improve nursing outcomes. Nursing innovation, in turn, is affected by nursing leadership. We employed a questionnaire survey to collect data, and selected a sample of nurses from hospitals in Taiwan. A total of 439 valid surveys were obtained. Hierarchical multiple regression model analysis was conducted to test the study hypothesis. The mean values of agreement of nurse innovation behaviour and transformational leadership were 3.40 and 3.78, respectively. Patient safety climate and innovation climate were found to have full mediating effects on the relationship between transformational leadership and innovation behaviour. Organisational climate has a significant impact on innovation behaviour. Transformational leadership has indirect effects on innovation behaviour via the mediation of patient safety climate and innovation climate. Hospitals should enhance transformational leadership by designing leadership training programmes and establishing transformational culture. In addition, nursing managers should foster nursing innovation through improvements in organisational climate. © 2013 John Wiley & Sons Ltd.

NANO(materials): EHS, Research, INnovation, ReGulation

OpenAIRE

GOTTARDO STEFANIA; MECH AGNIESZKA; QUIROS PESUDO LAIA; CRUTZEN HUGUES

2017-01-01

This collection contains data, results, information and tools derived from research and institutional activities regarding the environment, health and safety matters for supporting sustainable innovation for regulatory purposes, with a focus on nanomaterials.

Call 1 - Innovations in Livestock Vaccines (ENG)

International Development Research Centre (IDRC) Digital Library (Canada)

Renee Larocque

production, and commercialization of innovative vaccines against livestock ... These vaccines often have limited uptake, efficacy or safety profiles .... It is the policy of IDRC that research work involving human participants or animals be.

The Role of Technological Innovations for Dry Storage of Used Nuclear Fuel

International Nuclear Information System (INIS)

Issard, H.

2015-01-01

We cannot predict the recovery from the financial crisis, but regardless of whether it is slow or quick, the global need for energy and the growth of electricity consumption have been confirmed. Many countries throughout the world are pursuing or have publicly expressed their intention to pursue the construction of Nuclear Power Plants or to extend the life of existing nuclear reactors and to address the back end of the fuel cycle. As always in history, when economic constraints become more severe, the answer is often innovation. Maintaining the high level of performance of nuclear energy and increasing safety with an attractive cost is today’s challenge. It is true for reactors, true also for fuel cycle and in particular for the back end: recycling and interim storage. Interim storage equipment or systems of used fuel are considered in this presentation. The industry is ready to provide support to countries and utilities for the development of radioactive material transportation and storage, and is striving to develop innovative solutions in wet or dry storage systems and casks and to bring them to the market. This presentation will elaborate on the two following questions: Where are the most crucial needs for technological innovations? What is the role of innovation? The needs of technological innovation are important in 3 domains: storage equipment design, interfaces and handling of used fuel and safety justification methodology. Concerning the design, continuous effort for optimisation of used fuel storage equipment requires innovations. These designs constitute the new generation of dry storage casks. The expectations are a higher payload thanks to new materials (such as metal matrix composites) and optimised geometry for criticality-safety, better thermal evacuation efficiency to accept higher fuel characteristics (more enrichment, burnup, shorter cooling time), resistance to impact of airplanes. Designs are also expected to be optimised for sustainable

Process innovations in the management of radioactive wastes

International Nuclear Information System (INIS)

Theyyunni, T.K.

1995-01-01

Innovative processes and techniques were investigated for their possible application in the management of low, intermediate and high level radioactive wastes. High decontamination, high volume reduction, process simplicity and operational safety are some of the objectives of these investigation. Based on the favourable results, it is hoped that many of these process innovations can be introduced in the waste management schemes with beneficial results. (author)

Mathematical model of innovative sustainability “green” construction object

Directory of Open Access Journals (Sweden)

Slesarev Michail

2016-01-01

Full Text Available The paper addresses the issue of finding sustainability of “green” innovative processes in interaction between construction activities and the environment. The problem of today’s construction science is stated as comprehensive integration and automation of natural and artificial intellects within systems that ensure environmental safety of construction based on innovative sustainability of “green” technologies in the life environment, and “green” innovative products. The suggested solution to the problem should formalize sustainability models and methods for interpretation of optimization mathematical modeling problems respective to problems of environmental-based innovative process management, adapted to construction of “green” objects, “green” construction technologies, “green” innovative materials and structures.

New research opportunities for roadside safety barriers improvement

Science.gov (United States)

Cantisani, Giuseppe; Di Mascio, Paola; Polidori, Carlo

2017-09-01

Among the major topics regarding the protection of roads, restraint systems still represent a big opportunity in order to increase safety performances. When accidents happen, in fact, the infrastructure can substantially contribute to the reduction of consequences if its marginal spaces are well designed and/or effective restraint systems are installed there. Nevertheless, basic concepts and technology of road safety barriers have not significantly changed for the last two decades. The paper proposes a new approach to the study aimed to define possible enhancements of restraint safety systems performances, by using new materials and defining innovative design principles. In particular, roadside systems can be developed with regard to vehicle-barrier interaction, vehicle-oriented design (included low-mass and extremely low-mass vehicles), traffic suitability, user protection, working width reduction. In addition, thanks to sensors embedded into the barriers, it is also expected to deal with new challenges related to the guidance of automatic vehicles and I2V communication.

The Various Shapes of Innovation

Directory of Open Access Journals (Sweden)

Roubou I.

2015-12-01

Full Text Available Background: Innovation is one of the most difficult words to define, especially when it comes to health technology. The aim of this article is to get a better understanding of the multi-dimensional facet of innovation, how this is valued by different stakeholders and the way forward in order to create innovative interventions for the sake of the patients and the society.

Final report-passive safety optimization in liquid sodium-cooled reactors

International Nuclear Information System (INIS)

Cahalana, J. E.; Hahn, D.

2007-01-01

This report summarizes the results of a three-year collaboration between Argonne National Laboratory (ANL) and the Korea Atomic Energy Research Institute (KAERI) to identify and quantify the performance of innovative design features in metallic-fueled, sodium-cooled fast reactor designs. The objective of the work was to establish the reliability and safety margin enhancements provided by design innovations offering significant potential for construction, maintenance, and operating cost reductions. The project goal was accomplished with a combination of advanced model development (Task 1), analysis of innovative design and safety features (Tasks 2 and 3), and planning of key safety experiments (Task 4). Task 1--Computational Methods for Analysis of Passive Safety Design Features: An advanced three-dimensional subassembly thermal-hydraulic model was developed jointly and implemented in ANL and KAERI computer codes. The objective of the model development effort was to provide a high-accuracy capability to predict fuel, cladding, coolant, and structural temperatures in reactor fuel subassemblies, and thereby reduce the uncertainties associated with lower fidelity models previously used for safety and design analysis. The project included model formulation, implementation, and verification by application to available reactor tests performed at EBR-II. Task 2--Comparative Analysis and Evaluation of Innovative Design Features: Integrated safety assessments of innovative liquid metal reactor designs were performed to quantify the performance of inherent safety features. The objective of the analysis effort was to identify the potential safety margin enhancements possible in a sodium-cooled, metal-fueled reactor design by use of passive safety mechanisms to mitigate low-probability accident consequences. The project included baseline analyses using state-of-the-art computational models and advanced analyses using the new model developed in Task 1. Task 3--Safety

Innovation Dialectics: An Extended Process Perspective on Innovation in Services

DEFF Research Database (Denmark)

Nardelli, Giulia

2017-01-01

Services are characterised by the involvement of customers and other interest groups in the innovation process. The aim of this study is to understand how and why, in the service context, tensions and potential conflicts between heterogeneous interest groups unfold during processes of innovation....... The empirical field in which the investigation was set is facility services, a type of business-to-business support services. The findings were extracted from a longitudinal, in-depth case study of a Danish, multi-national organisation over 13 years, complemented with an explorative study in the Danish facility...... service context. The findings suggest that tensions and conflicts between heterogeneous interest groups are an intrinsic element of innovation processes in services, and that emphasising them might actually support a clearer understanding of processes of innovation in services. The outcome of the analysis...

46{sup th} annual meeting on nuclear technology (AMNT 2015). Key topics / Outstanding know-how and sustainable innovations enhanced safety and operation excellence

Energy Technology Data Exchange (ETDEWEB)

Lamm, Matthias [AREVA GmbH, Erlangen (Germany). R and D; Hollands, Thorsten [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany). Reactor Safety Research Div.

2016-01-15

Summary report on the Technical Sessions ''Know-how, New Build and Innovations'' and ''Operation and Safety of Nuclear Installations, Fuel SA: WASA-BOSS + CESAM'' of the 46{sup th} Annual Conference on Nuclear Technology (AMNT 2015) held in Berlin, 5 to 7 May 2015. Other Sessions of AMNT 2015 have been covered in atw 7 to 12 (2015) and will be covered in further issues of atw.

Employee-driven Innovation in Welfare Services

Directory of Open Access Journals (Sweden)

Thomas Wihlman

2014-05-01

Full Text Available There is a growing interest in both employee-driven innovation (EDI and innovation in welfare services, but a lack of empirical studies addressing innovation from the employee perspective. Accordingly, this study was designed to contribute with well-grounded empirical knowledge, aiming to explore the barriers to and opportunities for participation in innovation experienced by employees of the Swedish welfare services. In order to reach the aim, a qualitative thematic analysis of 27 semi-structured interviews with employees in four municipalities was performed. The study identified three main themes, with a great impact on the innovative performance of the studied organizations: support, including leadership and innovation processes; development, including creativity and learning; and organizational culture, which includes attitudes and communication, all essential ingredients in EDI. Experienced barriers for innovation were unclear or non-existing innovation processes with ambiguous goals, insufficient learning, and deficient organizational slack, thus creating a tension between day-to-day work and innovation and hindering reflection and exploration. Attitudes of colleagues and lack of communication were also barriers to implementing innovation, suggesting the need for better management support for a communicative and open culture. Opportunities were found, including commitment to innovation and willingness to try new ideas, but the employees must be given the mandate and sufficient time to develop the potential that emerges from continuous learning, time for reflection, and user dialogue. The conclusion was that incremental innovations existed, but the full potential of these did not benefit the entire organization due to inadequate communication and lack of innovation processes. The study improves our understanding of how employees regard their involvement in innovation. It also discusses how to make better use of employees’ resources in

Innovation and knowledge generation in cooperation nets: challenges for regulations in the nuclear safety area in Brazil; Inovacao e geracao de conhecimento nas redes de cooperacao: desafios para a regulacao na area de seguranca nuclear no Brasil

Energy Technology Data Exchange (ETDEWEB)

Staude, Fabio

2014-07-01

The importance of inter-organisational cooperation within the innovation process has been increasingly recognized. In fact, all organisations, at some point, need to look to external sources for inputs to the process of building up technological competence. In this sense, through a detailed case study, this thesis examine theoretical and empirically how collaborative initiatives have supported the Brazilian nuclear regulatory body in the development and implementation of innovations, in order to verify the positive relationship between the collaboration and the organisational innovation performance. Emphasizing the importance of both internal sources of knowledge and external participation, the study encompasses documentary analysis, a preliminary survey and semi-structured interviews with the regulatory body employers in charge of controlling medical and research facilities and activities involving radiation sources. The thesis demonstrates that innovations developed and implemented in the Brazilian nuclear safety and security area are associated with collaborative initiatives, in order to improve the organizational capability to fulfill safety obligations, providing some important implications for regulatory body managers concerned with the management of innovation. The findings also identified actors with a significant degree of influence in the innovation process. The result reveals that the support provided by these actors has a significant influence on the innovation performance of the Brazilian nuclear regulatory body, suggesting that Brazil should adopt more interactive models of innovation and knowledge transfer. In addition, the findings show that these key actors can play a very distinctive role in the context of sectoral systems of innovation information regime. (author)

On managing innovation by design : Towards SMART methods

NARCIS (Netherlands)

Vermaas, P.E.

2012-01-01

In this paper innovation by design is characterised schematically and methodological with the aim of analysing how projects of innovation by design can be managed. First, I approach innovation by design from an engineering perspective, and show that the incorporation of innovation into design

Financial mechanisms and social safety-oriented model of development of the Russian economy (based on import substitution and innovation

Directory of Open Access Journals (Sweden)

T. I. Ovchinnikova

2016-01-01

Full Text Available In article features of import substitution in the socially oriented model determined as economy with the high level of the state income redistribution of subjects of managing and developed on this basis of system of social protection are considered. Import substitution is considered from the traditional point of view – creation of new productions and technologies which are implemented at the expense of own and borrowed funds of investors. The financial mechanisms for implementation of innovations promoting import substitution are offered: industry plans and road maps as availability of reference points for creation of rational amounts of the budget payments and financial resources of the entities necessary for upgrade of productions, and also the directions of financial resources for implementation of specific most important national priorities and innovative investment projects. The volume of investment into the fixed capital correlated to its cost considerably grew from 3.5% in 2003 to 11.6% in 2009, but value of this indicator isn't enough as degree of depreciation of fixed assets in economy of the region constituted 44.9% in 2009. Direct foreign investments prevail: in Krasnoyarsk Krai their share constituted in 2009 – 45.4%, Krasnodar Region – 40.5%, the Nizhny Novgorod Region – 84.5%. In the Voronezh region such entities as KBHA, Federal State Unitary Enterprise State Research and Production Space Center branch of M. V. Khrunichev the Voronezh Mechanical Plant, JSC Sozvezdiye Concern having the high technologies making safety of the country and especially needing investments function. In plans of urgent strategy of social and economic development of the Voronezh region it is supposed to increase specific weight of innovative products of such entities and to increase the level of innovative activity till 2020. The socially oriented model considering import substitution domestic technologies and products needs strengthening of the

AMNT 2014. Key topic: Reactor operation, safety - report. Pt. 3

Energy Technology Data Exchange (ETDEWEB)

Bohnstedt, Angelika [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Programm Nukleare Sicherheitsforschung (NUKLEAR); Mull, Thomas [AREVA GmbH, Erlangen (Germany). Nuclear Fusion, HTR and Transverse Issues (PTDH-G); Starflinger, Joerg [Stuttgart Univ. (Germany). Inst. fuer Kernenergetik und Energiesysteme (IKE)

2015-01-15

Summary report on the following sessions of the Annual Conference on Nuclear Technology held in Frankfurt, 6 to 8 May 2014: - Reactor Operation, Safety: Radiation Protection (Angelika Bohnstedt); - Competence, Innovation, Regulation: Fusion Technology - Optimisation Steps in the ITER Design (Thomas Mull); - Competence, Innovation, Regulation: Education, Expert Knowledge, Knowledge Transfer (Joerg Starflinger). The other Sessions of the Key Topics 'Reactor Operation, Safety', 'Competence, Innovation, Regulation' and 'Fuel, Decommissioning and Disposal' have been covered in atw 10 and 12 (2015) and will be covered in further issues of atw.

Frugal Innovation and development: Aides or adversaries?

NARCIS (Netherlands)

Knorringa, P; I, Peša; Leliveld, A; van Beers, C.P.

2016-01-01

Frugal innovation aims to bring products, services and systems within the reach of billions of poor and emerging middle-class consumers. Through significantly cutting costs while safeguarding user value, frugal innovation opens opportunities for new business models and may well disrupt innovation

Challenges on innovations of newly-developed safety analysis codes

International Nuclear Information System (INIS)

Yang, Yanhua; Zhang, Hao

2016-01-01

With the development of safety analysis method, the safety analysis codes meet more challenges. Three challenges are presented in this paper, which are mathematic model, code design and user interface. Combined with the self-reliance safety analysis code named COSINE, the ways of meeting these requirements are suggested, that is to develop multi-phases, multi-fields and multi-dimension models, to adopt object-oriented code design ideal and to improve the way of modeling, calculation control and data post-processing in the user interface.

Challenges on innovations of newly-developed safety analysis codes

Energy Technology Data Exchange (ETDEWEB)

Yang, Yanhua [Shanghai Jiao Tong Univ. (China). School of Nuclear Science and Engineering; Zhang, Hao [State Nuclear Power Software Development Center, Beijing (China). Beijing Future Science and Technology City

2016-05-15

With the development of safety analysis method, the safety analysis codes meet more challenges. Three challenges are presented in this paper, which are mathematic model, code design and user interface. Combined with the self-reliance safety analysis code named COSINE, the ways of meeting these requirements are suggested, that is to develop multi-phases, multi-fields and multi-dimension models, to adopt object-oriented code design ideal and to improve the way of modeling, calculation control and data post-processing in the user interface.

Innovation Level of Sustainable Practices Adopted in Industrial Enterprises

Directory of Open Access Journals (Sweden)

Simone Sehnem

2016-07-01

Full Text Available This research aimed to identify the level of innovation of sustainable practices by industrial companies. This is a descriptive study that made use of a questionnaire answered by 50 industrial companies. The results show that environmental practices at full level by 68% of businesses are monitoring the risks and opportunities for the organization's activities due to climate change; 56% of companies surveyed are waste separation; followed by the realization of related health and safety training at work in 52% of cases surveyed; and 48% monitoring and recording of injuries, the injury rate, the rate of occupational diseases, lost days, absenteeism and number of work-related fatalities for all workers. Among the practices adopted not stand out incineration (burning mass (80% of companies surveyed; hiring indigenous and tribal employees (68%; composting (64% and use of surface water in the process. Therefore, the study contributed to the disclosure cleaner called production innovations and also pipe end technologies. Some social practices that signal a commitment of the organizations with human resources and the humanization and also economical focused on continuous improvement.

How Does Transformational Leadership Promote Innovation in Construction? The Mediating Role of Innovation Climate and the Multilevel Moderation Role of Project Requirements

Directory of Open Access Journals (Sweden)

Yanchun Zhang

2018-05-01

Full Text Available Innovation plays a critical role in the sustainable development of the construction industry. This research aims at examining transformational leadership’s role in shaping employees’ innovative behavior by analyzing the mediating effect of innovation climate and the cross-level moderating effect of innovativeness as a project requirement. To achieve this aim, a questionnaire survey was conducted with 300 construction industry professionals in China and 251 valid replies were received. Data collected by the questionnaire were analyzed using the method of hierarchical linear modeling (HLM. The results showed that transformational leaders could nurture a mutual climate for innovation to motivate employees’ innovative behaviors. In addition, innovativeness as a project requirement at the project level strengthens the indirect link amongst transformational leadership and innovative behavior via the innovation climate. Therefore, in the presence of higher innovativeness as a project requirement, transformational leadership is more prone to exert a positive influence upon an individual’s innovative behavior via the perceived innovation climate. The research findings improve understanding of the roles of leadership and innovation climate in affecting individual behavioral outcomes, and could help project managers and leaders encourage innovative ideas within project organizations.

Safety-related Innovative Nuclear Reactor Technology Elements R and D (SINTER) Network and Global HTGR R and D Network (GHTRN). Strategic benefits of international networking

International Nuclear Information System (INIS)

Von Lensa, W.

1998-01-01

Action on 'Safety-related Innovative Nuclear Reactor Technology Elements - R and D - (SINTER) Network' both aim at the identification of priority items for sustainable innovations of nuclear technologies and work-shared European collaboration structures. Such an approach can also be realised for future R and D on HTGR-related R and D under the umbrella of the IAEA as already proposed by the 'International Working Group on Gas-Cooled Reactors (IWGGCR)' in 1996 and illustrated in this paper for the construction of a 'Global HTGR R and D Network (GHTRN)'. 3 refs

Strategizing on innovation systems

DEFF Research Database (Denmark)

Jofre, Sergio

developments enabling proper policy actions. The concept of innovation systems assumes that flows of technology and information among people, companies and institutions are crucial to the innovative process. At national level, innovation and technical development are the result of a complex set of interactions......This paper explores the strategic context of the implementation of the European Institute of Technology (EIT) from the perspective of National Innovation Systems (NIS) and the Triple Helix of University-Government-Industry relationship. The analytical framework is given by a comparative study...... implemented several action plans and programmes aiming at improving its technological and non-technological innovation capability, its performance in the global context is yet week, particularly if compared to rival economies such as Japan and the US (EC, 2008a). A recent initiative to foster Europe...

Interorganizational Innovation in Systemic Networks

DEFF Research Database (Denmark)

Seemann, Janne; Dinesen, Birthe; Gustafsson, Jeppe

2013-01-01

patients with chronic obstructive pulmonary disease (COPD) to avoid readmission, perform self monitoring and to maintain rehabilitation in their homes. The aim of the paper is to identify, analyze and discuss innovation dynamics in the COPD network and on a preliminary basis to identify implications...... for managing innovations in systemic networks. The main argument of this paper is that innovation dynamics in systemic networks should be understood as a complex interplay of four logics: 1) Fragmented innovation, 2) Interface innovation, 3) Competing innovation, 4) Co-innovation. The findings indicate...... that linear n-stage models by reducing complexity and flux end up focusing only on the surface of the network and are thus unable to grasp important aspects of network dynamics. The paper suggests that there is a need for a more dynamic innovation model able to grasp the whole picture of dynamics in systemic...

Steer-by-wire innovations and demonstrator

NARCIS (Netherlands)

Lupker, H.A.; Zuurbier, J.; Verschuren, R.M.A.F.; Jansen, S.T.H.; Willemsen, D.M.C.

2002-01-01

Arguments for 'by-wire' systems include production costs, packaging and traffic safety. Innovations concern both product and development process e.g. combined virtual engineering and Hardware-in-the-loop testing. Three Steer-by-wire systems are discussed: a steering system simulator used as a

Safety studies dedicated to molten salt reactors with a fast neutron spectrum and operated in the Thorium fuel cycle - Innovative concept of Molten Salt Fast Reactor

International Nuclear Information System (INIS)

Brovchenko, Mariya

2013-01-01

The nuclear reactors of the 4. generation must allow an optimized use of natural resources, while performing at a high safety level. The framework of this thesis is the deployment study of one of such a system, an innovative and still little studied Molten Salt Fast Reactor. An excellent safety is an ultimate requirement of the nuclear energy deployment, so it is important to raise this question at the current early stage of the MSFR concept development. This concept was the subject of a neutronic tool benchmark within a European project EVOL. Definition, calculations and results analyses were performed during this thesis. Comparisons of static neutronic and burn-up calculations, performed by the project participants, concluded to a good agreement between the different codes and methods used and pointed out the sensibility of the nuclear database choice on the results. With the aim of safety analysis of the MSFR, the decay heat was studied in detail. The tool used for the decay heat calculation was developed and validated, to finally evaluate the decay heat in the reactor. The decay heat source presented in different zones was quantified, concluding to a high importance of the cooling of the fuel salt and the bubbling system enclosing a part of the fission products. The safety analysis methodology was also studied in this thesis. Even if the safety principles are directly transposable to the MSFR, the precise recommendations are not. This is due to the specificity of the design that relies on the liquid state of the fuel, on the reprocessing systems located in the reactor and the embryonic stage of the design. First, a preliminary transposition work of some criteria to the MSFR design was realized, resulting amongst other things in a list of accidental scenarios particular for MSFR. Finally, a preliminary physical study of some types of accidental scenarios was performed, that can be used as a basis for further analyses with more sophisticated tools. (author) [fr

From automated defensive behaviour to innovation resilience behaviour: Improving the management of R&D and innovation projects (presentation)

NARCIS (Netherlands)

Oeij, P.R.A.

2016-01-01

Teams responsible for innovation can benefit from concepts from crisis management and safety science. So called mindful infrastructures are helpful for teams in overcoming critical incidents because such mindful infrastructures enable a resilient type of problem solving behaviour in these teams

What drives innovation in nuclear reactors technologies? An empirical study based on patent counts

International Nuclear Information System (INIS)

Berthelemy, Michel

2012-01-01

This paper examines the evolution of innovation in nuclear power reactors between 1974 and 2008 in twelve OECD countries and assesses to what extent nuclear innovation has been driven by economic incentives, political decisions and safety regulation considerations. We use priority patent applications related to Nuclear Power Plants (NPPs) as a proxy for innovating activity. Our results highlight that nuclear innovation is partly driven by the conventional paradigm where both demand-pull, measured by NPPs constructions in the innovating country and in the rest of the world, and technology-push, measured by Research and Development (R and D) expenditures specific to NPPs, have a positive and significant impact on innovation. Our results also evidence that the impact of public R and D expenditures and national NPPs construction on innovation is stronger when the quality of innovation, measured by forward patent citations, is taken into account, and have a long run positive impact on innovation through the stock of knowledge available to innovators. In contrast, we show that political decisions following the Three Miles Island and Chernobyl nuclear accidents, measured by NPPs cancellations, have a negative impact on nuclear innovation. Finally, we find that the nuclear safety authority has an ambivalent effect on innovation. On one hand, regulatory inspections have a positive impact on innovation, one the other hand, regulatory decisions to temporarily close a NPP have an adverse impact on innovation. (author)

Management Innovation and Its Measurement

OpenAIRE

Kraśnicka, Teresa; Głód, Wojciech; Wronka-Pośpiech, Martyna

2016-01-01

The aim of this paper is to explain the nature of management innovation, as well as to propose its measurement instrument. The paper offers a review of key publications on management innovation published in research journals within the last two decades. The critical analysis – primarily focused on definitions, the proposed dimensions of management innovation and the scales used for their measurement – has allowed for the development of an original tool for measuring management ...

Organizational technologies for transforming care: measures and strategies for pursuit of IOM quality aims.

Science.gov (United States)

Gamm, Larry; Kash, Bita; Bolin, Jane

2007-01-01

Progress on the Institute of Medicine's (IOM's) 6 aims to bridge the "quality chasm" requires both measurement and the concerting of multiple organizational technologies. The basic thesis of this article is that rapid progress on the IOM's multiple aims calls for transformative change within and among healthcare organizations. The promise of a number of types of transformative approaches is closely linked to their ability to simultaneously build upon several organizational technologies: clinical, social, information, and administrative technologies. To encourage and advance such efforts, this article identifies illustrative measures of attainment of the IOM's 6 aims or targeted areas for improvement that reflect the contributions of the 4 organizational technologies. It discusses examples of relationships between the IOM aims and the organizational technologies considered. Finally, the article offers illustrations of the interplay of these organizational technologies and IOM aims-across an array of organizational innovations with transformative potential. Included among such innovations are information technology in the form of electronic medical records, computer-based physician order entry, and patient health records; organization-wide patient-centered cultural change such as Studer's Hardwiring Excellence; Six Sigma and Toyota Production Management/LEAN; major clinical technology change, for example, minimally invasive cardiac surgery and broader treatment innovations such as disease management.

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

Science.gov (United States)

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

Innovative development and factors affecting the innovative activity of industrial enterprises in Bulgaria

Directory of Open Access Journals (Sweden)

Sotirova Asya Olegova

2016-12-01

Full Text Available Innovations are a necessity, innovations are a factor, innovations are the moving force of the companies in the 21st century. Every modern manager should recognize the role of innovations for the existence of the enterprises and to aim at innovative development. The novelties in various areas are to be followed up. It is necessary to look for the options and to overcome the obstacles standing in the way of innovations. The major objective of this article is to establish the state of innovative activity of industrial enterprises in Bulgaria and to identify the factors exercising the largest influence on their innovative development. The major results to be achieved are the establishment of the basic internal and external factors that support innovations, the deduction of the major problems occurring during the innovation process and the establishment of some directives to activation. The major methods of study used in this work are statistical methods for evaluation, method of analysis and synthesis, method of comparison. Information of literature sources has been studied and systematized within the process of research, as well as analytical reports of Bulgaria and the European Union, and results from an inquiry held are used, as well as statistical data of the National Statistical Institute of the Republic of Bulgaria.

Safety Training Parks – Cooperative Contribution to Safety and Health Trainings

DEFF Research Database (Denmark)

Reiman, Arto; Pedersen, Louise Møller; Väyrynen, Seppo

2017-01-01

. The concept of Safety Training Park (STP) has been developed to meet these challenges. Eighty stakeholders from the Finnish construction industry have been involved in the construction and financing of the STP in northern Finland (STPNF). This unique cooperation has contributed to the immediate success......, and evidence from the literature are presented with a focus on the pros and cons of the STPNF. The STP is a new and innovative method for safety training that stimulates different learning styles and inspires changes in individuals’ behavior and in the organizations’ safety climate. The stakeholders’ high...... commitment, a long-term perspective, and a strong safety climate are identified as preconditions for the STP concept to work....

INNOVATION ANALYSIS BASED ON SCORES AT THE FIRM LEVEL

Directory of Open Access Journals (Sweden)

Cătălin George ALEXE

2014-04-01

Full Text Available Innovation analysis based on scores (Innovation Scorecard is a simple way to get a quick diagnosis on the potential of innovation of a firm in its intention to achieve the innovation capability. It aims to identify and remedy the deficient aspects related to innovation management being used as a measuring tool for the innovation initiatives over time within the innovation audit. The paper aims to present the advantages and disadvantages of using the method, and the three approaches developed over time. Therefore, the model proposed by the consulting firm Arthur D. Little in collaboration with the European Business School, Eckelmann's model and AGGB's local model are summarized and compared. At the end of the paper, several possible solutions are proposed to improve the way of analysis based on scores.

INNOVATION MANAGEMENT TOOLS IN PUBLISHING COMPANIES

Directory of Open Access Journals (Sweden)

A. Shegda

2013-09-01

Full Text Available This article is devoted to the highly topical issue of modern publishing business as innovation management. introduction of technological innovation, measured as a promising strategy for the development of a constructive industry. The paper deals with main problems in managing of publishing companies. The reference consider of innovation management tools. In the article are exams the problems of books trend decline which require publishers introducing innovative methods of production and distribution. It was found that while the tools can be used. The process of innovation management with the following basic tools like as marketing innovation bench marketing, franchising, engineering innovation. It was found that while the tools can be used. So, the aim of the article is to analyze the modern tools of innovation management in the publishing field.

Game-like Technology Innovation Education

DEFF Research Database (Denmark)

Magnussen, Rikke

2011-01-01

  The aim of this paper is to discuss the first results and methodological challenges and perspectives of designing game-inspired scenarios for implementation of innovation processes into schools' science education. This paper comprises and report on a case study of a game-inspired innovation...... scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...... presented, along with discussions of the future of development of these educational spaces....

Safety balance: Analysis of safety systems

International Nuclear Information System (INIS)

Delage, M.; Giroux, C.

1990-12-01

Safety analysis, and particularly analysis of exploitation of NPPs is constantly affected by EDF and by the safety authorities and their methodologies. Periodic safety reports ensure that important issues are not missed on daily basis, that incidents are identified and that relevant actions are undertaken. French safety analysis method consists of three principal steps. First type of safety balance is analyzed at the normal start-up phase for each unit including the final safety report. This enables analysis of behaviour of units ten years after their licensing. Second type is periodic operational safety analysis performed during a few years. Finally, the third step consists of safety analysis of the oldest units with the aim to improve the safety standards. The three steps of safety analysis are described in this presentation in detail with the aim to present the objectives and principles. Examples of most recent exercises are included in order to illustrate the importance of such analyses

Towards an International Approach to Nuclear Safety

International Nuclear Information System (INIS)

Tomihiro Taniguchi

2006-01-01

This document presents in a series of transparencies the different activities of the IAEA: Introduction of International Atomic Energy Agency, Changing world, Changing Technology, Changing Global Security, Developing Innovative Nuclear Energy Systems, Global Nuclear Safety Regime, IAEA Safety Standards: Hierarchy - Global Reference for Striving for Excellence, IAEA Safety Reviews and Services: Integrated Safety Approach, Global Knowledge Network - Asian Nuclear Safety Network, Safety Issues and Challenges, Synergy between Safety and Security, Recent Developments: Safety and Security of Radioactive Sources, Convention on Physical Protection of Nuclear Material (CPPNM), Incident and Emergency Preparedness and Response, Holistic Approach for Safety and Security, Sustainable Development. (J.S.)

The development strategy of financial and innovative technologies

OpenAIRE

R.V. Lavrov

2013-01-01

The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always asso...

Logistics innovation development

DEFF Research Database (Denmark)

Pedrosa, Alex; Blazevic, Vera; Jasmand, Claudia

2014-01-01

to investigate the role of boundary-spanning employees in deepening and broadening customer knowledge while developing logistics service innovations. Findings The results show that boundary-spanning employees’ engage sequentially in deepening and broadening customer knowledge throughout the logistics innovation...... development process. In particular it shows that deepening customer knowledge tends to occur in one-to-one interactions. When boundary-spanning employees engage in broadening customer knowledge, they develop a rich understanding of current customer. Research limitations/implications (if applicable) In general......Purpose This paper aims to investigate the microfoundations—boundary-spanning employees activities and behaviors—of deepening and broadening customer knowledge during logistics innovation development. Design/methodology/approach A multiple case study approach (six case studies) was adopted...

Social innovation in the context of corporate social responsibility

Directory of Open Access Journals (Sweden)

María de Fátima León

2012-10-01

Full Text Available Faced with a reality characterized by unsolved social and environmental problems, it is common to observe the behavior of firms in terms of its contribution in the resolution or treatment of these problems. Many of these initiatives are examples of social innovations offering new products, processes and relationships in terms of benefiting the most disadvantaged groups in areas such as safety, health, education, environment, among others. In this sense, this documentary research examines the role of social innovation in the context of corporate social responsibility, through a review of theoretical topic of innovation, social innovation and corporate social responsibility. Also, through the filter of what can be considered social innovation, raises some examples of Venezuelan companies with socially responsible approaches moving toward maturity in a socially ethical enterprise.

Dukovany nuclear power plant safety

International Nuclear Information System (INIS)

1999-01-01

Presentation covers recommended safety issues for the Dukovany NPP which have been solved with satisfactory conclusions. Safety issues concerned include: radiation safety; nuclear safety; security; emergency preparedness; health protection at work; fire protection; environmental protection; chemical safety; technical safety. Quality assurance programs at all stages on NPP life time is described. Report includes description of NPP staff training provision, training simulator, emergency operating procedures, emergency preparedness, Year 2000 problem, inspections and life time management. Description of Dukovany Plant Safety Analysis Projects including integrity of the equipment, modernisation, equipment innovation and safety upgrading program show that this approach corresponds to the actual practice applied in EU countries, and fulfilment of current IAEA requirements for safety enhancement of the WWER 440/213 units in the course of MORAWA Equipment Upgrading program

Metagoverning Collaborative Innovation in Governance Networks

DEFF Research Database (Denmark)

Sørensen, Eva; Torfing, Jacob

2017-01-01

Western liberal governments increasingly seek to improve the performance of the public sector by spurring innovation. New Public Management reforms from the 1980s onward viewed strategic entrepreneurial leadership and public–private competition as key drivers of public innovation. By contrast......, and democratic legitimacy through innovation rather than incremental improvements. The article aims to sketch out the contours of such a strategy by comparing it with more traditional metagovernance strategies. The argument is illustrated by an empirical analysis of an example of collaborative innovation...

System thinking shaping innovation ecosystems

Science.gov (United States)

Abreu, António; Urze, Paula

2016-11-01

Over the last few decades, there has been a trend to build innovation platforms as enablers for groups of companies to jointly develop new products and services. As a result, the notion of co-innovation is getting wider acceptance. However, a critical issue that is still open, despite some efforts in this area, is the lack of tools and models that explain the synergies created in a co-innovation process. In this context, the present paper aims at discussing the advantages of applying a system thinking approach to understand the mechanisms associated with co-innovation processes. Finally, based on experimental results from a Portuguese co-innovation network, a discussion on the benefits, challenges and difficulties found are presented and discussed.

New innovative educational method to prevent accidents involving young road users (aged 15-24 – European Road Safety Tunes

Directory of Open Access Journals (Sweden)

Jankowska-Karpa Dagmara

2017-01-01

Full Text Available The article presents a new teaching method designed to improve road safety among young road users. Developed under “European Road Safety Tunes”, this international project was cofunded by EU DG MOVE. Its main aim is to improve road safety and minimize the number of road accidents, injuries and fatalities among road users who are 15-24 years old. The Safety Tunes method contains a series of workshops addressed to young vocational school students: cyclists, moped and motor riders and car drivers. The workshops incorporate peer and emotive education, and delivery of road safety related messages through different types of artistic forms. The topics tackled during class address awareness of possible risks and risk-behaviour, prevention of distraction and reduction in young fatalities and serious injuries on the road. All actions within the project are evaluated, both in terms of the impact of the workshops on students’ attitudes towards road safety problems and in terms of process assessment.

Lessons for responsible innovation in the business context

NARCIS (Netherlands)

Lubberink, Rob; Blok, Vincent; Ophem, van Johan; Omta, Onno

2017-01-01

This paper aims to contribute to the ongoing conceptual debate on responsible innovation, and provides innovation practices and processes that can help to implement responsible innovation in the business context. Based on a systematic literature review of 72 empirical scholarly articles, it was

OPEN INNOVATION PROJECT: THE SYSTEM OF ONLINE INDICATORS IN SCIENCE, TECHNOLOGY AND INNOVATION OF AMAZONAS (SiON

Directory of Open Access Journals (Sweden)

Moises Andrade Coelho

2016-05-01

Full Text Available This study aims to evaluate the implementation of an open innovation project in a public institution in the state of Amazonas. The theoretical and empirical background deals with science, technology and innovation indicators and open innovation. The study is characterized as a qualitative and descriptive research, with the case study as a methodological procedure. The delimitation of the universe was composed by a public institution in the area of science, technology and innovation (ST&I. In the case study, it was used an approach as tool to assess the implementation of open innovation projects. The results are shown several stages of open innovation project analyzed.  The study demonstrates the implications of open innovation project adoption to the strengthening of external networks and the maturing of the internal environment. The relevance of the study is based on the evaluation of an open innovation project in a public institution in order to foster the transition from traditional innovation processes to open innovation processes.

Features, present condition of development and future scope on the high temperature gas reactor as an innovative one

International Nuclear Information System (INIS)

Shiozawa, Shusaku

2001-01-01

The high temperature gas reactor has some features without previous reactors such as high temperature capable of taking-out, high specific safety, feasibility adaptable to versatile fuel cycle, and so on. Then, it is expected to be an innovative reactor to contribute to diversification of energy supply and expansion of energy application field. In Japan, under the HTTR (high temperature engineering test reactor) plan, construction of HTTR, which is the first high temperature gas reactor in Japan, was finished and its output upgrading test has been promoted. And, on the HTTR plan, together with promotion of full power operation, reactor performance tests, safety proof test, and so on, it is planned to carry out study on application of the high temperature heat such as hydrogen production and so on to aim to practise establishment and upgrading of technologies on high temperature gas reactor in Japan. Here were introduced features and present condition of development of the high temperature gas reactor as an innovative type reactor and described role and future scope in Japan. (G.K.)

Definition of user needs and “hot topics”, Deliverable 2.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Hagström, L. Thomson, R. Skogsmo, I. Houtenbos, M. Durso, C. Thomas, P. Elvik, R. & Wismans, J.

2016-01-01

Safety CaUsation, Benefits and Efficiency (SafetyCube) is a European Commission supported Horizon 2020 project with the objective of developing an innovative road safety Decision Support System (DSS) that will enable policymakers and stakeholders to select and implement the most appropriate

Safety and efficiency of future systems

International Nuclear Information System (INIS)

2000-01-01

The objective of the program was to investigate and evaluate new or revised concepts for nuclear energy that offer potential long term benefits in terms of cost, safety, waste management, use of fissile material, less risk of diversion and sustainability. The work program was concerned with studying innovative or revised reactor concepts and other applications, and innovative fuels and fuel cycles

A multilevel model of patient safety culture: cross-level relationship between organizational culture and patient safety behavior in Taiwan's hospitals.

Science.gov (United States)

Chen, I-Chi; Ng, Hui-Fuang; Li, Hung-Hui

2012-01-01

As health-care organizations endeavor to improve their quality of care, there is a growing recognition of the importance of establishing a culture of patient safety. The main objective of this study was to investigate the cross-level influences of organizational culture on patient safety behavior in Taiwan's hospitals. The authors measured organizational culture (bureaucratic, supportive and innovative culture), patient safety culture and behavior from 788 hospital workers among 42 hospitals in Taiwan. Multilevel analysis was applied to explore the relationship between organizational culture (group level) and patient safety behavior (individual level). Patient safety culture had positive impact on patient safety behavior in Taiwan's hospitals. The results also indicated that bureaucratic, innovative and supportive organizational cultures all had direct influence on patient safety behavior. However, only supportive culture demonstrated significant moderation effect on the relationship between patient safety culture and patient safety behavior. Furthermore, organizational culture strength was shown correlated negatively with patient safety culture variability. Overall, organizational culture plays an important role in patient safety activities. Safety behaviors of hospital staff are partly influenced by the prevailing cultural norms in their organizations and work groups. For management implications, constructed patient priority from management commitment to leadership is necessary. For academic implications, research on patient safety should consider leadership, group dynamics and organizational learning. These factors are important for understanding the barriers and the possibilities embedded in patient safety. Copyright © 2011 John Wiley & Sons, Ltd.

Financing of innovative development: realities and prospects

OpenAIRE

I.V. Khovrak

2013-01-01

The aim of the article. The purpose of the article is to analyze the theoretical and practical basis for financing national economy innovative development, and ways of financing innovation with international experience.The results of the analysis. It should be noted that Ukraine's transition to an innovative model of national economy development is the only way to improve the quality of economic growth. Some aspects of innovative development are shown in several regulatory documents. However,...

European Innovation Policy Concepts and the Governance of Innovation: Slovenia and the Struggle for Organizational Readiness at the National Level

Science.gov (United States)

Gebhardt, Christiane; Stanovnik, Peter

2016-01-01

This paper examines the interdependency of European Policy and governance of innovation. The authors elaborate on the policy implementation context of Slovenia, a small and less advanced European member state in a transition process. The literature on innovation policy, governance and existing innovation concepts aiming to accelerate economic…

The Methodical Approaches to Activation of Innovative Potential of Enterprise

Directory of Open Access Journals (Sweden)

Berveno Oksana V.

2017-12-01

Full Text Available The article is aimed at developing theoretical provisions and practical recommendations on methods of management and activation of innovative potential of enterprises. Assessment of innovative potential of enterprise should be carried out from different positions, taking into consideration all external and internal possibilities of enterprise as to carrying out an innovation activity. The system of management of innovation activity and implementation of innovative potential at enterprise should be closely woven in the general management of the enterprise. Activation of innovative potential of enterprise foresees adoption of the whole system of strategic decisions, which are aimed at creation of the most favorable conditions for implementation of innovative potential with obtaining of planned results. The system of activization of innovative potential should develop a number of organizational decisions on interaction of elements of the most innovative potential in the process of innovation activity and cooperation of innovative potential with other subsystems of the enterprise. Results of these organizational decisions in many respects determine efficiency of innovation activity of the enterprise.

Conceptual Underpinnings for Innovation Policy Design

DEFF Research Database (Denmark)

Borrás, Susana; Edquist, Charles

of innovation policy. This serves two important purposes. Firstly, it allows the identification of problems in an innovation system that require public policy intervention through the choice of appropriate policy instruments. Secondly, it allows a theoretically based identification of input indicators......In cases where innovation indicators and data fail to serve properly as a (necessary) basis for the design of innovation policies, it often has its roots in conceptual unclarities in the underlying concepts. The aim of this paper is to provide a theoretical and conceptual basis for the design...

Enacting Risk in Independent Technological Innovation

DEFF Research Database (Denmark)

Berglund, Henrik; Hellström, Tomas

2002-01-01

The present study aims at investigating the role of risk in the activity of independent technological venturing. Altogether, 12 deep-interviews were conducted with technological entrepreneurs, who had taken part in the inventive, developmental and the commercialisation phases of a technology......-based innovation process. The interviews revealed a number of enactment approaches through which these innovators encountered and affected (dealt with or transformed) risk within the innovation process. Factors thus developed from the empirical material included human capital, pace and priority, the world moves...... for the benefit of innovation management....

Evaluation of innovation processes

Directory of Open Access Journals (Sweden)

Jakub Tabas

2012-01-01

Full Text Available In present, innovations are spoken as an engine of the world economy because the innovations are transforming not only business entities but the whole industries. The innovations have become a necessity for business entities in order to survive on floating challenging markets. This way, innovations are driving force of companies’ performance. The problem which arises here is a question of measurement innovation’s effect on the financial performance of company or selection between two or more possible variants of innovation’s realization. Various authors which are focused on innovations processes are divided into two groups in their attitudes towards the question of influence of innovations on financial performance of companies. One group of the authors present the idea that any reliable measurement is not possible or efficient. The second group of authors present some methods theoretically applicable on this measurement but they base their approaches mostly on the methods of measurement of investments effectiveness or they suggest employment of indicators or ratios which wouldn’t be clearly connected with the outcome of innovation process. The aim of submitted article is to compare different approaches to evaluation of the innovation processes. The authors compare various approaches here and by use of analysis and synthesis, they determine their own method how to measure outcome of innovation process.

Innovative fission reactors for this century

International Nuclear Information System (INIS)

Minguez, E.

2007-01-01

It is well known that global trends indicate a rebirth of nuclear energy due to several items: the climate change and the use of energies that emits CO 2 , the cost and dependence of gas and oil, the new innovative reactors which are competitive, safer, and sustainable and can support the Kyoto Protocol. The Advanced Reactors have safer systems than those developed in the Generation II, which demonstrates that are sustainable for the present and nuclear industry has also developed new concepts for the future which also will be sustainable. Now the new power plants that have being constructed are classified in the Generation III. Several units of this technology are in operation in Japan and other countries of the Pacific. Europe is now constructing the first unit in Finland (Olkilouto) with European technology: the European Pressurized Reactor (EPR). France has announced the beginning of the construction of an EPR in Flamanville next year. In 2000, several countries with advanced nuclear technology established the Generation IV International Forum (GIF) to develop and demonstrate nuclear energy systems that offer advantages in the following areas: sustainability, economics, safety and reliability and proliferation resistance and physical protection. These new systems will be deployed commercially after 2030. Six innovative concepts are under research, and the aim is not only produce electricity, but also hydrogen using the operational conditions of several concepts. Developed countries with NPPs in operation have strategies for the future of the nuclear energy. For the short term is to extend the operation of the NPPs until 60 years, or alternatively construction of new units of Generation III, to substitute those closed for decommissioning, keeping the percentage of contribution to the electricity generated. Between the period 2030-50, the solution is to operate the new innovative systems of the Generation IV, which uses the passive concept, and in the second part

Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

Science.gov (United States)

Ramamani, Mahesh Kumar

2010-01-01

Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

Service innovation in China

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Jin, Jun

2014-01-01

Purpose – The aim of this paper is to advance our understanding of service innovation in China and to identify the major drivers and impediments for manufacturing companies pushing into services in China. Design/methodology/approach – By employing an in-depth longitudinal case of a Chinese company...... Chinese cities. Both internal and external factors played a significant role in influencing the development and implementation of service innovation in the case. The paper details and discusses the factors that affect service innovation in China. Research Limitations – The study is exposed...... in informing our expectations about the push of many Chinese manufacturing companies into services. The paper provides insights into the development and diffusion of service innovation in many fast transforming industrial companies in China. Lessons for other developing countries can also be drawn from...

Preapplication safety evaluation report for the Power Reactor Innovative Small Module (PRISM) liquid-metal reactor. Final report

Energy Technology Data Exchange (ETDEWEB)

Donoghue, J.E.; Donohew, J.N.; Golub, G.R.; Kenneally, R.M.; Moore, P.B.; Sands, S.P.; Throm, E.D.; Wetzel, B.A. [Nuclear Regulatory Commission, Washington, DC (United States). Associate Directorate for Advanced Reactors and License Renewal

1994-02-01

This preapplication safety evaluation report (PSER) presents the results of the preapplication desip review for die Power Reactor Innovative Small Module (PRISM) liquid-mew (sodium)-cooled reactor, Nuclear Regulatory Commission (NRC) Project No. 674. The PRISM conceptual desip was submitted by the US Department of Energy in accordance with the NRC`s ``Statement of Policy for the Regulation of Advanced Nuclear Power Plants`` (51 Federal Register 24643). This policy provides for the early Commission review and interaction with designers and licensees. The PRISM reactor desip is a small, modular, pool-type, liquid-mew (sodium)-cooled reactor. The standard plant design consists of dim identical power blocks with a total electrical output rating of 1395 MWe- Each power block comprises three reactor modules, each with a thermal rating of 471 MWt. Each module is located in its own below-grade silo and is co to its own intermediate heat transport system and steam generator system. The reactors utilize a metallic-type fuel, a ternary alloy of U-Pu-Zr. The design includes passive reactor shutdown and passive decay heat removal features. The PSER is the NRC`s preliminary evaluation of the safety features in the PRISM design, including the projected research and development programs required to support the design and the proposed testing needs. Because the NRC review was based on a conceptual design, the PSER did not result in an approval of the design. Instead it identified certain key safety issues, provided some guidance on applicable licensing criteria, assessed the adequacy of the preapplicant`s research and development programs, and concluded that no obvious impediments to licensing the PRISM design had been identified.

IMPROVING PATIENT SAFETY:

DEFF Research Database (Denmark)

Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

Improving patient safety is both a national and international priority as millions of patients Worldwide suffer injury or death every year due to unsafe care. University College Zealand employs innovative pedagogical approaches in educational design. Regional challenges related to geographic......, social and cultural factors have resulted in a greater emphasis upon digital technology. Attempts to improve patient safety by optimizing students’ competencies in relation to the reporting of clinical errors, has resulted in the development of an interdisciplinary e-learning concept. The program makes...

Driving Innovative Thinking in the New Zealand Construction Industry

Directory of Open Access Journals (Sweden)

Mohammadali Noktehdan

2015-04-01

Full Text Available This paper examines the relationship between innovation and productivity improvement in the construction industry. It is argued that this relationship is not well understood due to lack of in-depth understanding of innovation in construction. To overcome this obstacle, the authors present a multi-dimensional innovation classification system which aims at better defining and classifying what is meant by innovation in construction. The use of this classification system is demonstrated by applying it to a database of 500 innovations reported by the construction alliance, the Stronger Christchurch Infrastructure Rebuild Team. The results clearly demonstrate the diversity of types, degree of novelty and performance improvement benefits among construction innovations. Such diversity means that the impact of the reported innovations on productivity and performance are of different levels of significance. The classification system developed in this study can be used by construction organisations and alliances in the future to develop more detailed methods of calculating innovation performance indicators, based on the innovation type, novelty and benefits factors. By using this system, they can also put in place mechanisms to influence the types of innovation developed in their projects with the aim of maximising their productivity performance.

Open innovations, innovation communities and firm's innovative activities

Directory of Open Access Journals (Sweden)

Getejanc Vesna

2016-01-01

Full Text Available The open innovation paradigm emphasizes the fact that firms can improve their performance by opening their business models and reduce their R&D costs by effective incorporation of external knowledge. In other words, companies are able to capture value through knowledge that exists outside the boundaries of their organization. The shift from closed to open model of innovation has imposed the necessity to adopt more open approach to innovation within traditional academic view of business strategy. The adoption of this innovative approach is emphasized even more, by the necessity for stronger connection and cooperation among the participants of the innovation process. Free will and collaboration are the main characteristics of open source software, which is recognized in literature as the role model of open innovation and is a rapidly growing method of technology development. Furthermore, innovative communities represent a great opportunity for improvement of the companies' innovation activities, since they have become an important source for identifying the needs and problems of the users. Their development has been fostered by information technologies and recent social changes in user behavior. Recognizing and better understanding the motivation of the members of the innovation communities that guide them to participate in the process of idea generation, can have significant influence on their incorporation within the innovation process. Equally important is to define the incentives that are suited for stimulating and fostering innovative user activities. Taking this topic in consideration, the purpose of this article is to address the following questions: In what way does the collaboration in open source software projects have positive effect on companies' innovation performance? What are the innovation communities and how can companies establish successful interaction with them? Why does the interaction with innovation communities lead to

Cooperation networks and innovation: A complex system perspective to the analysis and evaluation of a EU regional innovation policy programme

OpenAIRE

Russo, Margherita; Rossi, Federica

2008-01-01

Recent developments in innovation theory and policy have led policymakers to assign particular importance to supporting networks of cooperation among heterogeneous economic actors, especially in production systems composed of small and medium enterprises. Such innovative policies call for parallel innovations in policy analysis, monitoring and assessment. Our analysis of a policy experiment aimed at supporting innovation networks in the Italian region of Tuscany intends to address some issues...

Innovations in television field: transition to the digital television

OpenAIRE

Serzhuk Anastasia Volodymyrivna; Kozlova Iryna Viktorivna

2014-01-01

The aim of the article. The article is about significance of innovations and innovative process. It is investigated that the development of the innovative activity acquires a great importance for management innovations at the enterprise; the pre-conditions of the innovative are determined and the innovative implementation to the telecommunication market are studied. The role of the digital television as a new type of broadcasting technology, where the transmission, processing and storage of t...

Eco-innovations in the functioning of companies.

Science.gov (United States)

Ociepa-Kubicka, A; Pachura, P

2017-07-01

The development of entrepreneurships in the 21st century cannot occur without taking care of the natural environment. The article presents issues related to eco-innovation. Despite the opportunities offered by eco-innovations, implementation of such initiatives remains to lead to various difficulties. They vary across countries and sectors. The insufficient number of enterprises in Poland and other European countries implement adequate level of eco-innovations. The main aim of this paper is to indicate the causes of this status and activities aimed to develop eco-innovativeness. The benefits and risks connected with implementation of innovative products and technologies were also discussed. Furthermore, the advantages of and barriers to their implementation into companies were analysed. The entrepreneurs from the least eco-innovative countries emphasize serious barriers, including uncertain demand from the market, uncertain return on investment or too long a payback period for eco-innovation, lack of funds within the enterprise, insufficient access to existing subsidies and fiscal incentive. They are especially afraid of the financial risks, which raises uncertainty and leads to refraining from innovative initiatives. The possibilities were indicated for the entrepreneurs who face problems with the implementation of innovative solutions. Particular attention was paid to the European Union activities for the development of eco-innovations. Numerous programs supporting their implementation were indicated. The article also presents examples of eco-innovation in water and sewage enterprises. It was emphasized that planning of eco-innovative solutions should be based on comprehensive information about actual benefits and possibility of threats to the environment which can be caused by implementation of eco-innovations. The study presents the example of threats resulting from different methods of sewage sludge management. Copyright © 2017 Elsevier Inc. All rights

Consumer-driven definition of traditional food products and innovation in traditional foods. A qualitative cross-cultural study.

Science.gov (United States)

Guerrero, Luis; Guàrdia, Maria Dolors; Xicola, Joan; Verbeke, Wim; Vanhonacker, Filiep; Zakowska-Biemans, Sylwia; Sajdakowska, Marta; Sulmont-Rossé, Claire; Issanchou, Sylvie; Contel, Michele; Scalvedi, M Luisa; Granli, Britt Signe; Hersleth, Margrethe

2009-04-01

Traditional food products (TFP) are an important part of European culture, identity, and heritage. In order to maintain and expand the market share of TFP, further improvement in safety, health, or convenience is needed by means of different innovations. The aim of this study was to obtain a consumer-driven definition for the concept of TFP and innovation and to compare these across six European countries (Belgium, France, Italy, Norway, Poland and Spain) by means of semantic and textual statistical analyses. Twelve focus groups were performed, two per country, under similar conditions. The transcriptions obtained were submitted to an ordinary semantic analysis and to a textual statistical analysis using the software ALCESTE. Four main dimensions were identified for the concept of TFP: habit-natural, origin-locality, processing-elaboration and sensory properties. Five dimensions emerged around the concept of innovation: novelty-change, variety, processing-technology, origin-ethnicity and convenience. TFP were similarly perceived in the countries analysed, while some differences were detected for the concept of innovation. Semantic and statistical analyses of the focus groups led to similar results for both concepts. In some cases and according to the consumers' point of view the application of innovations may damage the traditional character of TFP.

An Evolutionary Approach to Water Innovation: Comparing the Water Innovation Systems in China and Europe

DEFF Research Database (Denmark)

Moro, Mariú Abritta

The recent rise of the ‘green economy’ agenda has increased the attention to eco-innovations globally, with issues related to water stress identified as one of the major bottlenecks for sustainable economic growth. Water being a critical resource, more and more countries worldwide are recognizing...... the need for increasing their innovative capacity within the water sector. Using evolutionary economic theory, this thesis undertakes a longitudinal and comparative analysis of the water innovation dynamics in Europe and China, representing respectively a developed, green early mover economy......, and a centrally-planned economy and green late mover. The thesis aims to assess the similarities and differences in the mechanisms applied across these two regions, with a focus on outlining what drives eco-innovation development in the water sector. The thesis builds more specifically on the innovation system...

Continuous innovation in the drug life cycle

NARCIS (Netherlands)

Langedijk, J.

2016-01-01

Patients may benefit from new uses for old drugs. Competent authorities such as the European Medicines Agency evaluate the quality, efficacy and safety of a medicinal product for the use in a well-defined therapeutic indication. Innovations may continue upon the approval, for example through the

Football refereeing: Identifying innovative methods

Directory of Open Access Journals (Sweden)

Reza MohammadKazemi

2014-08-01

Full Text Available The aim of the present study is to identify the potentials innovation in football industry. Data were collected from 10 national and international referees, assistant referees and referees’ supervisors in Iran. In this study, technological innovations are identified that assist better refereeing performances. The analysis revealed a significant relationship between using new technologies and referees ‘performance. The results indicate that elite referees, assistant referees and supervisors agreed to use new technological innovations during the game. According to their comments, this kind of technology causes the referees’ performance development.

In Search of a Network Organization for Innovation: A Multilevel Analysis on Transnational Corporations' Global Innovation

DEFF Research Database (Denmark)

Hu, Yimei

2013-01-01

4 explores how transnational corporations perceive and design an internal network organization to facilitate global innovation. Based on a multiple case study of three Danish transnational corporations’ global R&D organization, this paper shows three types of network organization design...... explores how an SME develops a network organization consisting of both interfirm innovation networks and an internal network organization to facilitate its global innovation strategy. Regarding the intraorganizational network organization, market mechanism is adopted to optimize internal resource...... corporations perceive/design a network organization to facilitate their global innovation? • To what extent and how can we manage a network organization? Research focus of the dissertation is on transnational corporations’ network organization for innovation. The first research question aims to clarify...

Top Management Team Diversity and Strategic Innovation Orientation: The Relationship and Consequences for Innovativeness and Performance

DEFF Research Database (Denmark)

Talke, Katrin; Salomo, Søren; Kock, Alexander

2011-01-01

A firm's strategic innovation orientation, which is aimed at discovering and satisfying emerging customer needs with novel technological solutions, has repeatedly been shown to be crucial for firm innovativeness and firm performance. Despite its apparent importance, relatively little research has...... addressed antecedents of a firm's strategic orientation that help explain heterogeneity in innovation strategies across firms. Especially the influence of top management teams (TMT) should be critical, since innovation strategies are shaped at the top management level. Building on the theory of upper...... market data for firm performance. Results indicate that TMT diversity, measured as heterogeneity in educational, functional, industry, and organizational background, has a strong positive effect on a firm's innovation orientation. A strong proactive focus on emerging customer needs and on novel...

DIFFUSION OF INNOVATION IN MODERN SCHOOL

Directory of Open Access Journals (Sweden)

Lazar Stosic

2013-06-01

Full Text Available This paper presents the results of research aimed to examine how teachers are interested in the application of innovation in teaching and in their personal development. An attempt was made to determine their opinion on the application of innovation in education. Sample consisted of 162 teachers (N = 162 in primary and secondary schools. We used the technique of scaling and instrument evaluation scale that was specifically designed for this research. The results show that teachers easily and smoothly implement innovations in their educational work and the knowledge gained by applying innovation far better in terms of practical application and durability of the knowledge acquired without the use of innovation. A qualitative analysis has shown that the majority of respondents had positive views of the use of innovations in their schools.

Role of systems safety in maintaining affordable safety in the 1980's

International Nuclear Information System (INIS)

Hollister, H.; Trauth, C.A. Jr.

1979-01-01

Historically, the Department of Energy and its predecessors have used and supported the development of systems safety programs, practices, and principles, finding them by and large adequate, effective, and managerially efficient. Today, attempts are bing made to resolve increasingly complex environmental, safety, and health problems by turning to increasingly complex and detailed regulation as the primary governmental answer. It is increasingly doubtful that such an approach will provide management of these issues and problems that is either effective or efficient. Challenge is issued to those in systems safety to develop and apply systems safety principles and practices more broadly to total operational systems and not just to hardware and to environmental and health protection and not just to safety, so that the total universe of environmental, safety, and health can be managed effectively and efficiently with encouragement of innovation and creativity, using a relatively brief and concise, but adequate, regulatory base

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of inherent shutdown is emphasized in the approach to the design of innovative, small pool-type liquid-metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower events in evolving metal and oxide innovative designs

Impacts of reactivity feedback uncertainties on inherent shutdown in innovative designs

International Nuclear Information System (INIS)

Mueller, C.J.

1986-01-01

The concept of ''inherent shutdown'' is emphasized in the approach to the design of innovative, small pool-type liquid metal reactors (LMRs). This paper reports an evaluation of reactivity feedback uncertainties used in the analyses of anticipated transients without scram (ATWS) for innovative LMRs, and the associated impacts on safety margins and inherent shutdown success probabilities on unprotected loss-of-flow (LOF) events. It then assesses the ultimate importance of these uncertainties on LOF and transient overpower (TOP) events in evolving metal and oxide innovative designs

Challenges and Considerations for Innovative Small and Medium Sized Reactors

International Nuclear Information System (INIS)

Kuznetsov, V.

2008-01-01

There is an ongoing interest in Member States in the development and application of small and medium sized reactors (SMRs). In the near term, most new NPPs are likely to be evolutionary water cooled reactor designs building on proven systems while incorporating technological advances and often the economics of scale, resulting from the reactor outputs of up to 1600 MW(e). For a longer term, the focus is on innovative designs aiming to provide increased benefits in the areas of safety and security, non-proliferation, waste management, resource utilization and economy, as well as to offer a variety of energy products and flexibility in design, siting and fuel cycle options. Many innovative designs are reactors within the SMR range, having an equivalent electric power less than 700 MW(e) or even less than 300 MW(e). It is important that small or medium sized reactor does not necessarily mean small or medium sized nuclear power plant. The majority of innovative SMR concepts and designs provide for power station configurations with several units at a site or for NPP configurations with 2 or more reactor modules. In most cases, the units or modules could be added incrementally. Innovative SMRs are in many cases intended for markets different from those in which large nuclear power plants operate, i.e., markets that value more distributed electrical supplies, a better match between supply increments and investment capability or demand growth, more flexible siting or greater product variety. SMRs cannot compete with larger capacity plants on an economy of scale basis. However, they could be competitive via employing alternative design strategies, taking advantage of smaller reactor size resulting in a less complex design and operation and maintenance or in an increased overall energy conversion efficiency, and by relying on alternative deployment strategies, taking advantage of multiple unit factors and learning curve, and shorter construction schedule and 'exact' unit

INNOVATION - THE ROLE OF TRUST

Directory of Open Access Journals (Sweden)

Kornélia Lazányi

2017-11-01

Full Text Available Innovations and constant change are inevitable parts of our everyday lives. It is not only because advanced technologies are more effective, but mostly because in the 21st century more and more realise that scarce resources – among them the safe and clean environment as such - necessitate a paradigm change and intense innovation. This revolution is easily trackable in the organisational and (supranational policies. However, innovation, and its necessary prerequisites are seldom investigated from the individuals’ point of view. It is easy to understand that inter-organisational trust is inevitable on both the consumers’ and the providers’ (innovators’ side, however, it has to be made clear that an innovative organisation has to create a trusting environment within the company, in order to foster collaboration, the generation of new ideas, creativity and finally innovation. The present paper endeavours to call attention to the notion of trust and its antecedents and consequences in relation to innovations. The aim is to provide assistance in understanding how to develop trust in each other and hence foster further innovations and development.

Enhancing collaborative innovation in the public sector

DEFF Research Database (Denmark)

Sørensen, Eva; Torfing, Jacob

2011-01-01

demand for public innovation, and demonstrates how it can be enhanced through multiactor collaboration. The case for collaborative innovation is supported by insights from three different social science theories. The theoretical discussion leads to the formulation of an analytical model that can be used......Encouraged by the proliferation of governance networks and the growing demands for public innovation, this article aims to advance “collaborative innovation” as a cross-disciplinary approach to studying and enhancing public innovation. The article explains the special conditions and the growing...... in future studies of collaborative innovation in the public sector....

Consumption of Eco-Innovative Food: How Values and Attitudes Drive Consumers’ Purchase of Organics?

Directory of Open Access Journals (Sweden)

Marcia Dutra de Barcellos

2015-04-01

Full Text Available Brazilian recent economic growth led to a rising demand for products that must satisfy desires that go beyond basic needs. Following this growth, social and environmental awareness upsurge, increasing demand for sustainable food, and subsequently, an opportunity for companies to add value through innovation in sustainable food products, e.g. to develop innovative ingredients and products (such as organics that provide healthiness for consumers and a sustainable offer for the market. Considering the importance of consumer evaluation for the adoption and success of an innovation, the aim of this paper is to investigate conscious consumption behaviour of organic food in Brazil. In specific, to verify the relationship between personal values, attitudes towards the environment and technology, and attitudes and consumer behaviour towards eco-innovative food. A survey with 401 consumers was held in organic street markets in Porto Alegre. Data was analysed through Structural Equation Modelling. Results indicate that consumers presented strong collectivistic values and very positive attitudes towards environment and nature. These attitudes positively influence the purchase of eco-innovative food. Attitudes towards technological progress negatively influence on its consumption. Theoretically, the hierarchical model is confirmed. This study addressed the consumption of eco-innovative food, in this case, organic food, trying to overtake the gap between attitudes and behaviour.  Public authorities and companies should work to increase consumer awareness and consumption of sustainable food, benefiting society and the natural environment, and must improve communication about the relevance of how technology can act to improve safety and increase the availability of eco-friendly food.

InnovationCity Ruhr: a prime example for social and technological innovation

OpenAIRE

Götting, Adrian

2014-01-01

The project “InnovationCity Ruhr” deals with the reconstruction of the city of Bottrop with regard to energy saving measures. The aim is to make the city more environmental friendly in order to create a model for other industrial cities. Until the conclusion of the project in the year 2020, it is planned to change the surface of Bottrop in several positive ways. This paper focuses on the description of the project to give the reader an example of what exactly is done within the scope of Innov...

Supporting innovation. International Project on Innovative Nuclear Reactors and Fuel Cycles moves into first phase

International Nuclear Information System (INIS)

Gowin, Peter J.; Kupitz, Juergen

2001-01-01

Work has been initiated through the IAEA International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO), including technical meetings and workshops scheduled over the coming months. Among activities is an information 'side event' on INPRO at the IAEA General Conference in September 2001. Among topics addressed at the Steering Committee Meeting earlier this year are user requirements and nuclear development criteria in the area of safety; safety issues related to waste management technologies of innovative nuclear reactors and fuel cycles; methodology of assessment and comparison of innovative nuclear technology with respect to INPRO; user requirements on environmental impacts of innovative reactors, fuel cycles, and waste management; and user requirements and nuclear energy development criteria in the area of non-proliferation and proliferation resistance. In December 2001, the second meeting of the INPRO Steering Committee is scheduled. At the inaugural meeting earlier this year, the Steering Committee stressed the unique role of INPRO relative to other national and international initiatives on innovative nuclear power technologies. The role lies in identifying the needs and requirements of a spectrum of developing and developed countries; and contributing explicitly to the debate on the global acceptability of nuclear power. As of August 2001, the following countries or entities have become members of INPRO: Argentina, Canada, China, France, Germany, India, Netherlands, Russian Federation, Spain, Turkey, and the European Commission. In total, 14 experts have been nominated by their respective governments or international organizations. All IAEA Member States are also free to participate in the Steering Committee as observers. The Terms of Reference define INPRO's rationale and purpose, in the context of energy needs and developments. They state that the 'long-term outlook for nuclear energy should be considered in the broader perspective of future

Proposal for a technology-neutral safety approach for new reactor designs

International Nuclear Information System (INIS)

2007-09-01

Many states are considering an expansion of their nuclear power generation programmes. Many of the technologies and concepts are new and innovative. The current design and licensing rules are applicable to mostly large water reactors and there are no accepted rules in place for design, safety assessment and licensing for new innovative nuclear power plants. This TECDOC proposes a (new) safety approach and a methodology to generate technology-neutral (i.e. independent of reactor technology) safety requirements and a 'safe design' for advanced and innovative reactors. The experience gained in decades of design and licensing, combined with the development of risk-based concepts, has provided insights that will form the basis for new safety rules and requirements. Many lessons learned acknowledge the importance of such concepts as safety goals and defence in depth and the benefits of integrating risk insights early in an iterative design process. A new safety approach will incorporate many of the new developments in these concepts. For example, the probabilistic elements of defence in depth will help define the cumulative provisions to compensate for uncertainty and incompleteness of our knowledge of accident initiation and progression. This TECDOC also identifies areas of work, which will require further definition, research and development and guidance on application. This publication is to be used as a guide to developing a new technology-neutral safety approach, and as a guide in the application of methodologies to define the safety requirements for an innovative reactor designs. The method proposes an integration of deterministic and probabilistic considerations with established principles and concepts such as safety goals and defence in depth. The TECDOC recommends that the structure of the new technology-neutral main pillars for the design and licensing of innovative nuclear reactors be developed following a top-down approach to reflect a newer risk-informed and

Innovation in nuclear technology

International Nuclear Information System (INIS)

Bertel, E.

2007-01-01

Innovation has been a driving force for the success of nuclear energy and remains essential for its future. For the continued safe and economically effective operation and maintenance of existing nuclear systems, and to meet the goals set out by projects aiming at designing and implementing advanced systems for the future, efficient innovation systems are needed. Consequently, analysing innovation systems is essential to understand their characteristics and enhance their performance in the nuclear sector. Lessons learnt from innovation programmes that have already been completed can help enhance the effectiveness of future programmes. The analysis of past experience provides a means for identifying causes of failure as well as best practices. Although national and local conditions are important factors, the main drivers for the success of innovative endeavors are common to all countries. Cooperation and coordination among the various actors are major elements promoting success. All interested stakeholders, including research organisations, industrial actors, regulators and civil society, have a role to play in supporting the success of innovation, but governments are an essential trigger, especially for projects with long durations and very ambitious objectives. Governments have a major role to play in promoting innovation because they are responsible for the overall national energy policy which sets the stage for the eventual deployment of innovative products and processes. Moreover, only governments can create the stable legal and regulatory framework favourable to the undertaking and successful completion of innovation programmes. International organisations such as the NEA may help enhance the effectiveness of national policies and innovation programmes by providing a forum for exchanging information, facilitating multilateral collaboration and joint endeavors, and offering technical support for the management of innovative programmes

Effects of multi-stakeholder platforms on multi-stakeholder innovation networks: Implications for research for development interventions targeting innovations at scale

Science.gov (United States)

Schut, Marc; Hermans, Frans; van Asten, Piet; Leeuwis, Cees

2018-01-01

Multi-stakeholder platforms (MSPs) have been playing an increasing role in interventions aiming to generate and scale innovations in agricultural systems. However, the contribution of MSPs in achieving innovations and scaling has been varied, and many factors have been reported to be important for their performance. This paper aims to provide evidence on the contribution of MSPs to innovation and scaling by focusing on three developing country cases in Burundi, Democratic Republic of Congo, and Rwanda. Through social network analysis and logistic models, the paper studies the changes in the characteristics of multi-stakeholder innovation networks targeted by MSPs and identifies factors that play significant roles in triggering these changes. The results demonstrate that MSPs do not necessarily expand and decentralize innovation networks but can lead to contraction and centralization in the initial years of implementation. They show that some of the intended next users of interventions with MSPs–local-level actors–left the innovation networks, whereas the lead organization controlling resource allocation in the MSPs substantially increased its centrality. They also indicate that not all the factors of change in innovation networks are country specific. Initial conditions of innovation networks and funding provided by the MSPs are common factors explaining changes in innovation networks across countries and across different network functions. The study argues that investigating multi-stakeholder innovation network characteristics targeted by the MSP using a network approach in early implementation can contribute to better performance in generating and scaling innovations, and that funding can be an effective implementation tool in developing country contexts. PMID:29870559

Effects of multi-stakeholder platforms on multi-stakeholder innovation networks: Implications for research for development interventions targeting innovations at scale.

Science.gov (United States)

Sartas, Murat; Schut, Marc; Hermans, Frans; Asten, Piet van; Leeuwis, Cees

2018-01-01

Multi-stakeholder platforms (MSPs) have been playing an increasing role in interventions aiming to generate and scale innovations in agricultural systems. However, the contribution of MSPs in achieving innovations and scaling has been varied, and many factors have been reported to be important for their performance. This paper aims to provide evidence on the contribution of MSPs to innovation and scaling by focusing on three developing country cases in Burundi, Democratic Republic of Congo, and Rwanda. Through social network analysis and logistic models, the paper studies the changes in the characteristics of multi-stakeholder innovation networks targeted by MSPs and identifies factors that play significant roles in triggering these changes. The results demonstrate that MSPs do not necessarily expand and decentralize innovation networks but can lead to contraction and centralization in the initial years of implementation. They show that some of the intended next users of interventions with MSPs-local-level actors-left the innovation networks, whereas the lead organization controlling resource allocation in the MSPs substantially increased its centrality. They also indicate that not all the factors of change in innovation networks are country specific. Initial conditions of innovation networks and funding provided by the MSPs are common factors explaining changes in innovation networks across countries and across different network functions. The study argues that investigating multi-stakeholder innovation network characteristics targeted by the MSP using a network approach in early implementation can contribute to better performance in generating and scaling innovations, and that funding can be an effective implementation tool in developing country contexts.

Innovation for the future of Irish MedTech industry: retrospective qualitative review of impact of BioInnovate Ireland's clinical fellows.

Science.gov (United States)

McGloughlin, Elizabeth Kate; Anglim, Paul; Keogh, Ivan; Sharif, Faisal

2018-01-01

Clinicians have historically been integral in innovating and developing technology in medicine and surgery. In recent years, however, in an increasingly complex healthcare system, a doctor with innovative ideas is often left behind. Transition from idea to bedside now entails significant hurdles, which often go unrecognised at the outset, particularly for first-time innovators. The BioInnnovate Ireland process, based on the Stanford Biodesign Programme (Identify, Invent and Implement), aims to streamline the process of innovation within the MedTech sector. These programmes focus on needs-based innovation and enable multidisciplinary teams to innovate and collaborate more succinctly. In this preliminary study, the authors aimed to examine the impact of BioInnovate Ireland has had on the clinicians involved and validate the collaborative process. To date, 13 fellows with backgrounds in clinical medicine have participated in the BioInnovate programme. Ten of these clinicians remain involved in clinical innovation projects with four of these working on Enterprise Ireland funded commercialisation grants and one working as chief executive officer of a service-led start-up, Strive. Of these, five also remain engaged in clinical practice on a full or part-time basis. The clinicians who have returned to full-time clinical practice have used the process and learning of the programme to influence their individual clinical areas and actively seek innovative solutions to meet clinical challenges. Clinicians, in particular, describe gaining value from the BioInnovate programme in areas of 'Understanding Entrepreneurship' and 'Business Strategy'. Further study is needed into the quantitative impact on the ecosystem and impact to other stakeholders.

Efficiency of innovative technology in construction industry

Science.gov (United States)

Stverkova, H.; Vaclavik, V.

2017-10-01

The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

People, Politics, and Innovation: A Process Perspective

NARCIS (Netherlands)

L. Alexander (Lameez)

2014-01-01

markdownabstract__Abstract__ Innovation is often considered the Holy Grail of competitive advantage and growth in modern organizations. Organizing for innovation can therefore be seen as the cornerstone of organizational success. In this dissertation, I aimed to advance a more complex and

Development of innovative technological base for large-scale nuclear power

International Nuclear Information System (INIS)

Adamov, E.O.; Dedul, A.V.; Orlov, V.V.; Rachkov, V.I.; Slesarev, I.S.

2017-01-01

The problems of the Nuclear Power (NP) further development as well as the ways of their resolution on the basis of innovative fast reactor concepts and the Closed Equilibrium Fuel Cycle (CEFC) are analyzed. The new paradigm of NP and the corresponding NP super task are declared. The corresponding super task could be considered a transition to the vital risk free nuclear power through the guaranteed elimination/suppression of all their vital risks and threats (or their transformation to the category of some ordinary risks and threats) on the base of ''natural safety principle''. The project of Rosatom State Corporation (named ''PRORYV'') is launched within the Federal Target Program ''Nuclear power technologies of new generation for 2010 to 2015 and in perspective till 2020''. It has been planned just for these goals achievement. Super-task solution is quite ''on teeth'' to PRORYV project which is initially focused on the ''natural safety'' realization. This project is aimed, in particular, at construction of the demonstration lead cooled reactor BREST-300-OD and the enterprise for equilibrium fuel cycle closing.

The relationship between the concepts «innovation», «innovativeness» and «innovation activity» in the enterprise management system: the experience of the Polish researchers

Directory of Open Access Journals (Sweden)

V.V. Ksendzuk

2018-04-01

Full Text Available 1 (39. – Р. 60–66: ill. 2. – Table 2. – Refs.: 24 titles. The article analyzes the conceptual apparatus in terms of management of innovative activity of enterprises. The feasibility for the relevance of research is carried out on the basis of analysis of statistical data in the sphere of use of innovations in the Ukrainian and Polish businesses. The research studied different approaches of Polish scientists to the interpretation of the concepts «innovation», «innovativeness» and «innovation activity» to justify the interdependence among them in theoretical and practical terms. This allowed to draw conclusions in terms of improvement of the studied concepts. Indeed, as shown by a study in entrepreneurial activities and in the scientific literature, approach to the interpretation of these concepts differs and requires revision with the aim of developing the theoretical foundations for the preparation of innovative business strategies, evaluation of indicators of innovativeness for stakeholder groups.

Studies on the safety and transmutation behaviour of innovative fuels for light water reactors; Untersuchungen zum Sicherheits- und Transmutationsverhalten innovativer Brennstoffe fuer Leichtwasserreaktoren

Energy Technology Data Exchange (ETDEWEB)

Schitthelm, Oliver

2012-07-01

Nuclear power plants contribute a substantial part to the energy demand in industry. Today the most common fuel cycle uses enriched uranium which produces plutonium due to its {sup 238}U content. With respect to the long-term waste disposal Plutonium is an issue due to its heat production and radiotoxicity. This thesis consists of three main parts. In the first part the development and validation of a new code package MCBURN for spatial high resolution burnup simulations is presented. In the second part several innovative uranium-free and plutonium-burning fuels are evaluated on assembly level. Candidates for these fuels are a thorium/plutonium fuel and an inert matrix fuel consisting of plutonium dispersed in an enriched molybdenum matrix. The performance of these fuels is evaluated against existing MOX and enriched uranium fuels considering the safety and transmutation behaviour. The evaluation contains the boron efficiency, the void coefficient, the doppler coefficient and the net balances of every radionuclide. In the third part these innovative fuels are introduced into a German KONVOI reactor core. Considering todays approved usage of MOX fuels a partial loading of one third of innovative fuels and two third of classical uranium fuels was analysed. The efficiency of the plutonium depletion is determined by the ratio of the production of higher isotopes compared to the plutonium depletion. Todays MOX-fuels transmutate about 25% to 30% into higher actinides as Americium or Curium. In uranium-free fuels this ratio is about 10% due to the lack of additional plutonium production. The analyses of the reactor core have shown that one third of MOX fuel is not capable of a net reduction of plutonium. On the other hand a partial loading with thorium/plutonium fuel incinerates about half the amount of plutonium produced by an uranium only core. If IMF is used the ratio increases to about 75%. Considering the safety behavior all fuels have shown comparable results.

Innovative Modelling Approach of Safety Culture Assessment in Nuclear Power Plant

International Nuclear Information System (INIS)

Ahn, N.

2016-01-01

A culture is commonly defined as the shared set of norms and values that govern appropriate individual behavior. Safety culture is the subset of organizational culture that reflects the general attitude and approaches to safety and risk management. While safety is sometimes narrowly defined in terms of human death and injury, we use a more inclusive definition that also considers mission loss as a safety problem and is thus applicable to nuclear power plants and missions. The recent accident reports and investigations of the nuclear power plant mission failures (i.e., TMI, Chernobyl, and Fukushima) point to safety cultural problems in nuclear power plants. Many assessment approaches have been developed by organizations such as IAEA and INPO based on the assessment of parameters at separate levels — individuals, groups, and organizations.

From Kisiizi to Baltimore: cultivating knowledge brokers to support global innovation for community engagement in healthcare.

Science.gov (United States)

Ibe, Chidinma A; Basu, Lopa; Gooden, Rachel; Syed, Shamsuzzoha B; Dadwal, Viva; Bone, Lee R; Ephraim, Patti L; Weston, Christine M; Wu, Albert W

2018-02-09

Reverse Innovation has been endorsed as a vehicle for promoting bidirectional learning and information flow between low- and middle-income countries and high-income countries, with the aim of tackling common unmet needs. One such need, which traverses international boundaries, is the development of strategies to initiate and sustain community engagement in health care delivery systems. In this commentary, we discuss the Baltimore "Community-based Organizations Neighborhood Network: Enhancing Capacity Together" Study. This randomized controlled trial evaluated whether or not a community engagement strategy, developed to address patient safety in low- and middle-income countries throughout sub-Saharan Africa, could be successfully applied to create and implement strategies that would link community-based organizations to a local health care system in Baltimore, a city in the United States. Specifically, we explore the trial's activation of community knowledge brokers as the conduit through which community engagement, and innovation production, was achieved. Cultivating community knowledge brokers holds promise as a vehicle for advancing global innovation in the context of health care delivery systems. As such, further efforts to discern the ways in which they may promote the development and dissemination of innovations in health care systems is warranted. Trial Registration Number: NCT02222909 . Trial Register Name: Reverse Innovation and Patient Engagement to Improve Quality of Care and Patient Outcomes (CONNECT). Date of Trial's Registration: August 22, 2014.

Innovative research reactor core designed. Estimation and analysis of gamma heating distribution

International Nuclear Information System (INIS)

Setiyanto

2014-01-01

The Gamma heating value is an important factor needed for safety analysis of each experiments that will be realized on research reactor core. Gamma heat is internal heat source occurs in each irradiation facilities or any material irradiated in reactor core. This value should be determined correctly because of the safety related problems. The gamma heating value is in general depend on. reactor core characteristics, different one and other, and then each new reactor design should be completed by gamma heating data. The Innovative Research Reactor is one of the new reactor design that should be completed with any safety data, including the gamma heating value. For this reasons, calculation and analysis of gamma heating in the hole of reactor core and irradiation facilities in reflector had been done by using of modified and validated Gamset computer code. The result shown that gamma heating value of 11.75 W/g is the highest value at the center of reactor core, higher than gamma heating value of RSG-GAS. However, placement of all irradiation facilities in reflector show that safety characteristics for irradiation facilities of innovative research reactor more better than RSG-GAS reactor. Regarding the results obtained, and based on placement of irradiation facilities in reflector, can be concluded that innovative research reactor more safe for any irradiation used. (author)

INNOVATION IN THE EUROPEAN UNION

Directory of Open Access Journals (Sweden)

VLADIMIR-CODRIN IONESCU

2014-11-01

Full Text Available In the contemporary knowledge-based society, innovation, as a vector used for the application and promotion of inventions and innovations, is one of the main sources used for obtaining a sustainable competitive advantage. The present paper points out the main directions which the European Commission aims to develop in the sphere of innovation, within the context of the Initiative: “A Union of Innovation”, which is part of the Europe 2020 Strategy. The paper analyses the performances accomplished by the EU states in the area of innovation while developing an international perspective that may represent the starting point in identifying solutions whereby the EU could reduce the gaps that exist in relation to the main international competitors, i.e. South Korea, USA and Japan.

INNOVATION IN THE EUROPEAN UNION

Directory of Open Access Journals (Sweden)

Vladimir-Codrin IONESCU

2014-05-01

Full Text Available In the contemporary knowledge-based society, innovation, as a vector used for the application and promotion of inventions and innovations, is one of the main sources used for obtaining a sustainable competitive advantage. The present paper points out the main directions which the European Commission aims to develop in the sphere of innovation, within the context of the Initiative: “A Union of Innovation”, which is part of the Europe 2020 Strategy. The paper analyses the performances accomplished by the EU states in the area of innovation while developing an international perspective that may represent the starting point in identifying solutions whereby the EU could reduce the gaps that exist in relation to the main international competitors, i.e. South Korea, USA and Japan.

Antecedents and implications of disruptive innovation: Evidence from China

OpenAIRE

Wan, Feng; Williamson, Peter; Yin, Eden

2015-01-01

A growing recognition of the importance of disruptive innovation has led researchers to examine the question of how disruptive innovation comes about and to what extent it reflects "discovery" versus "creation" of opportunities. Earlier research has focused on the organisational preconditions for disruptive innovation to arise. Much less attention has been paid to the role of innovation processes, including their goals and design, in promoting disruptive innovation. In this paper we aim to be...

Innovation. An Instrument for Development of Companies

Directory of Open Access Journals (Sweden)

Ana-Maria Nica

2017-05-01

Full Text Available Innovation is seen in numerous specialized studies as an efficient method for improving the performance of a company based on the sector in which that company operates. Based on this idea, the article aims to determine the nature of inter-correlation between the innovation activity of companies and the level of performance of these, which are the main types of innovation and how they can influence companies` position and how the sector of activity can influence the dimension of the impact of innovation. For achieve these objectives have been analysed empirical studies in various sectors, studies which have highlighted a positive inter-correlation between innovation activity and the performance of companies with significant differences depending on the type of innovation and industry use. The article is completed by an empirical analysis which aims to determine the extent to which performance of companies in the construction sector is sensitive to innovation activity. For the analysis were collected data from 14 companies which developed the specific activities in the construction sector of Europe, were achieve a total of 112 observations. The results obtained by applying a multiple regression model shows a positive correlation relationship between indicators of innovation (R&D expenditures and the value of patents/patents on the one side and performance indicators (equity, labour productivity and number of employees on the other side. Another direction of research analysed in this paper is to determine the impact of labour indicators on the level of innovation, in this situation was achieve a positive but insignificant inter-correlation between those indicators.

Linking scientific and practical knowledge in innovation systems

OpenAIRE

Isaksen, Arne; Nilsson, Magnus

2011-01-01

New research indicates that firms combining the science-based STI (Science, Technology, Innovation) and the experience-based DUI (Doing, Using, Interacting) modes of innovation are more efficient when it comes to improving innovation capacity and competitiveness. With regard to innovation policy, the STI mode calls for a supply driven policy, typically aimed to commercialise research results. The DUI mode suggests a demand driven policy approach, such as supporting the development of new prod...

Innovation leadership in software product management

OpenAIRE

Saine, Pasi

2017-01-01

One of the key criteria for a software company competiveness and productivity is to be innovative. Aim of this thesis work was to examine how NSN innovation strategy plans and leadership has been fulfilled by the company so far. Also with intention of observing on means how these are grounded as part of everyday working in research and development. Intention was to claim constructive arguments on how innovative processes and concepts are working in relation to the plans on NSN. I have an ...

Market introduction of innovative reactors

International Nuclear Information System (INIS)

Heek, A.I.V.

1996-01-01

Besides the development of evolutionary and passive LWR, also that of innovative reactors is attractive, because other applications (new markets) besides base load electricity generation can be thought of, and interesting new features on the area of safety or waste incineration can be shown. For market introduction however, a (partial) new infrastructure and a demonstration plant are required. Taking the abundance of fossil fuels and the accompanying low fuel prices today and in the near future into account, the funds to finance this will only become available when 1)the projected energy generating costs will be substantially lower than those of today, and 2)the costs of market introduction (i.e. the demonstration plant and the required infrastructure) will be limited. Generally speaking, there are two ways to seek competitiveness of a reactor type: 1)application of economy of scale, and 2)simplification. In this paper, an example of the second possibility is pursued for an innovative reactor type. The HR1 is a 40 MWth high temperature gas cooled reactor for heat and power cogeneration, a simplified version of the German HTR Module. The power level is chosen so small that additional safety features become apparent. For example, after a total loss of coolant the fuel remains fully intact, even if the reactor shutdown system fails and the reactor goes critical again after a number of hours. These safety features are used to omit certain components, like the emergency core cooling system, or to select a cheaper version of components, e.g. replacing the containment building by a confinement. Moreover, degradation of the safety class of certain components comes within the realm of possibilities. The cost reduction offered by these two measures are used to more than offset the economy-of-scale disadvantage of this small reactor system. (author)

Science, Technology, and Innovation Policy

DEFF Research Database (Denmark)

Lundvall, Bengt-Åke; Borrás, Susana

2005-01-01

This chapter is about what governments have done and could do to promote the production, diffusion, and use of scientific and technical knowledge in order to realize national objectives. We begin the chapter with "story-telling" based on sketchy historical facts. The aim of  the two stories...... is to illustrate that innovation policy covers a wide set of issues that have been on the agenda far back in history while still remaining important today. We move on to sketch the history of innovation policy, splitting it up into the three ideal types: science, technology, and innovation policy. We use OECD...

National innovation policy and global open innovation: Exploring balances, tradeoffs and complementarities

DEFF Research Database (Denmark)

Bloch, Carter Walter; Sverre, Herstad; Ebersberger, Bernd

2010-01-01

. We argue that the purpose of public research and innovation policy remains one of developing and sustaining territorial knowledge bases capable of growing and supporting internationally competitive industries. But the rules of the game have changed. Public policy now needs to carefully balance......The aim of this article is to suggest a framework for examining the way national policy mixes are responding to the challenges and opportunities of globally distributed knowledge networks, cross-sectoral technology flows and consequently open innovation processes occurring on an international scale...

Innovating in Health Care – Modern Challenges

Directory of Open Access Journals (Sweden)

Sebija Izetbegović

2013-12-01

Full Text Available Introduction: The goal of this article is to present that innovating in health care begins to become an imperative in present time. Innovating will enable the achievement of the highest quality health care results and the patients' satisfaction with the least amount of financial resources.Methods: The thorough literature review of multifaceted sources was conducted including: studies, books, monographies and peer – reviewed journals with the goal of achieving the clearer picture of today's modern challenges in the complex fi eld of health care innovation.Discussion: Theoretical and empirical studies clearly indicate that the innovation is one of the key factors in the competitiveness of the organization and its survival in the market. Developed countries of the world today are making significant efforts in order for innovation to become a national priority, with special emphasis placed on measuring innovation performance. Results of theoretical and practical studies show that in the future, treatment of the most diffi cult and complex diseases of our time, through the entirely new discoveries and results, derived from the process of innovation, will project entirely new positive forms and outcomes in the health care.Conclusion: There is no doubt that the humanity and medical science will through innovation succeed to win the battles against the majority of the most complex contemporary diseases. Malignant neoplasm of tomorrow, through the application of a new, innovative approaches to research, processes and treatments will become a chronic diseases. Among many, the particular problem in the process of innovation will represent the cost of research and development (R&D, production and the safety of prescription drugs.

Patterns of Frugal Innovation in Healthcare

Directory of Open Access Journals (Sweden)

Hareem Arshad

2018-04-01

Full Text Available Frugal innovations have the potential to offer simple and cost-effective solutions to the healthcare challenges of the world. However, despite the potential for frugal innovations in healthcare, this context has been rarely studied. The objective of this article is to shed some light on patterns of frugal innovations in healthcare and thereby contribute to the literature. With this aim, we conducted a comprehensive literature review and searched for innovations that were labelled as frugal and were related to healthcare. This led us to a sample of 50 frugal innovations in the healthcare sector. For each of the 50 selected examples, we examined various characteristics of the innovation, such as the country of origin, first launch market, type of innovator, type of innovation, type of care, and geographic diffusion. Our findings show that most of the frugal innovations originated in the United States, followed by India. The most frequent first launch market was India. In terms of types of innovators, academia seemed to be the strongest driver. Most frugal innovations are product innovations in the fields of neonatology and general practice. In this article, we expand on these findings and examine the relationships between individual variables to reveal further insights. Finally, we offer conclusions, an outlook for frugal innovation in the healthcare sector, and future research questions.

SAFR: a marriage of safety and innovation in LMR design

International Nuclear Information System (INIS)

Lancet, R.T.; Mills, J.C.

1985-01-01

The Sodium Advanced Fast Reactor (SAFR) is a natural evolution of earlier designs, given the current economic and licensing environment. Stringent safety and economic goals have been established for the SAFR plant. This paper describes how these goals are being satisfied, with the primary emphasis being placed on safety. The top level safety goals are: (a) to provide inherently safe responses to all credible events (b) to minimize the potential for severe accidents, and (c) to eliminate the need for evacuation, (d) limited financial risk, (e) assured investment protection, (f) minimum development risk, (g) high capacity factor, (h) long plant life, and (i) low personnel radiation exposure

Innovation in Small and Medium Firms.

Science.gov (United States)

Organisation for Economic Cooperation and Development, Paris (France). Committee for Scientific and Technical Personnel.

A study analyzed the policies of 20 Organisation for Economic Cooperation and Development (OECD) member countries pertaining to small and medium enterprises (SMEs). Aims of the study were to assess the current role of SMEs as generators and users of innovations, to analyze the components of a favorable climate for innovation in SMEs, and to…

21st Century global regimes for safety of nuclear power plants

International Nuclear Information System (INIS)

Lipar, M.

2005-01-01

In this presentation author gives the IAEA activities in nuclear safety and services coordinated by the IAEA. Principles of operational safety as well as evolutionary and innovative NPP designs are presented.

The agrarian innovation in Camajuaní: inequities and contradictions?

Directory of Open Access Journals (Sweden)

Annia Martínez Massip

2016-10-01

Full Text Available The agrarian innovation in Camajuaní shows a group of social problems, despite of being a leading municipality in the production of different crops, tobacco and livestock farming. The article is aimed at characterizing, from a sociological approach, the agrarian innovation in producers of different crops, industrial crops, livestock farming and poultry in Camajuaní. A survey, a semi-structured interview and an analysis of the content were applied to an intentional simple of 39 innovators. The outcomes resulted in: gender and age inequity, variability in the levels of scholarship and the tenure of the land of the farmers for an insufficient cognitive domain of innovation, and predominance of a medium level of innovation for most agrarian practices with a high efficiency but low novelty in the various cultures. The agrarian innovations are affected by the contradiction of lacking a bond to the social innovations, with economical aims and being absent to a local system of innovation, which not only limits its growing and development, but also reflects the lack of projection of local entities and civil society; what put at risk the agrarian, rural, and local development.

Innovation drivers and barriers in food processing

NARCIS (Netherlands)

Fortuin, F.T.J.M.; Omta, S.W.F.

2009-01-01

Purpose - The food processing industry, confronted with increased global competition and more stringent customer demands, is pressurized to improve the pace and quality of its innovation processes. This paper aims to find out what factors constitute the main drivers and barriers to innovation and to

Researching safety culture: deliberative dialogue with a restorative lens.

Science.gov (United States)

Lorenzini, Elisiane; Oelke, Nelly D; Marck, Patricia Beryl; Dall'agnol, Clarice Maria

2017-10-01

Safety culture is a key component of patient safety. Many patient safety strategies in health care have been adapted from high-reliability organizations (HRO) such as aviation. However, to date, attempts to transform the cultures of health care settings through HRO approaches have had mixed results. We propose a methodological approach for safety culture research, which integrates the theory and practice of restoration science with the principles and methods of deliberative dialogue to support active engagement in critical reflection and collective debate. Our aim is to describe how these two innovative approaches in health services research can be used together to provide a comprehensive effective method to study and implement change in safety culture. Restorative research in health care integrates socio-ecological theory of complex adaptive systems concepts with collaborative, place-sensitive study of local practice contexts. Deliberative dialogue brings together all stakeholders to collectively develop solutions on an issue to facilitate change. Together these approaches can be used to actively engage people in the study of safety culture to gain a better understanding of its elements. More importantly, we argue that the synergistic use of these approaches offers enhanced potential to move health care professionals towards actionable strategies to improve patient safety within today's complex health care systems. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

CATEGORICAL TOOL OF INNOVATIVE LABOR PROVIDING IN MODERN CONDITIONS

Directory of Open Access Journals (Sweden)

Anna Chernoivanova

2017-03-01

Full Text Available The article aims to study theoretical foundations of providing innovative work in modern conditions based on systematizing categorical tools. As a result of the study we found out the innovative work features and singled it out among other related to it categories such as “creative work”, “intellectual work”, “labor management”; summarized theoretical propositions about the nature of innovation work and clarified its definition. Classification of innovative work was grounded. The features of the innovative work were defined. Innovative work was singled out among other related to it types of work. Keywords: innovative work, the types of innovative work, creative work.

Syndicate Innovation Venturing: Translating Academic Innovations into Commercial Successes

Directory of Open Access Journals (Sweden)

Alain A. Vertès

2012-07-01

Full Text Available Innovations that initiate new technology cycles, i.e., radical innovations, bring tremendous value to Society and build for the companies that deploy them sustainable competitive advantages. However, large firms have typically been relatively inefficient at accessing from academia or technology start-ups such technological leaps. Indeed, most multiyear and multimillion dollar academia-industry partnerships have historically not resulted in any acceleration of the rate of deployment of game-changing innovations, which empirically proceeds in 25 year cycles, such as for example the expansion of the scope of the pharmaceutical industry from small molecules to biologics, or, projecting into the future, to siRNA or therapeutic stem cell technologies. Syndicated innovation venturing is a new strategic partnering concept described here that brings together actors from different economic segments in a non zero-sum game as a means to facilitate seed-funding, with the aim to de-risk technologies while reducing initial financial exposures. A case study in the pharmaceutical industry suggests that alleviating this hurdle may provide an appropriate environment to improve the dynamics of academic technology transfer to the commercial phase. By contributing to the de-risking of the creation of novel biotechnology businesses, this novel mechanism could help speed up the commercialization of emerging technologies on a large scale. At a time when knowledge-based firms such as pharmaceutical companies attempt to revisit their innovation models to advance science, in spite of an environment of increasing risk-aversion, such responses could tilt the balance in favor of disruptive products and sustained corporate financial performance by removing common barriers to radical innovation deployment.

The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-12-01

Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

Innovative activity in chosen branches of the tertiary sector in the Czech Republic

Directory of Open Access Journals (Sweden)

Eliska Jiraskova

2015-03-01

Full Text Available The aim of this paper is to provide a brief overview on innovation in services and their approach to the protection of intellectual property. The submitted article summarizes preparing part of a starting project mostly focused on investment environment. The area of interest is companies providing services in the territory of the Czech Republic. The aim of the project is supporting actions of promoting investment and innovative environment. It is necessary to exactly define innovation in services and to analyze innovative activity first so the aim could be achieved. A partial aim of the project will be finding out whether branches which report higher revenues from innovative activities are actively using the opportunity to patent their service because innovations are closely connected to the protection of intellectual property as well. The described part concerns innovations in selected branches of tertiary sector whereas all the branches which have been registered by Czech Statistical office, because of a validation of application for patent proceeding at least in two examined periods since 1993 are examined. Furthermore a possible dependency between an amount of patents in single regions and an amount of revenues coming from innovative companies to a region.

Drive of Open Source Idea Generation for Innovation

OpenAIRE

Khan, Zahidul

2013-01-01

The aim of the thesis is to introduce the source of idea generation for innovation. The scope is limited to provide general knowledge about relevant issues of the co-creation of products which play significant role for innovation. In product innovation, it is necessary to consider external valuable work and talent. Firms increasingly use open source models to collect external ideas for innovation, for instance, by means of websites where customers, suppliers and other external parties can sub...

Innovation and growth in SME Networks

DEFF Research Database (Denmark)

Brink, Tove

2015-01-01

The aim of this paper is to reveal what organising can enable innovation and growth within entrepreneurial SME networks. The research is conducted in the Danish food industry with the participation of three food producing firm networks. The posed hypothesis are tested in a structural equation...... modeling (SEM) approach with data available from 55 SMEs. The findings show a significant positive impact from internal complementary preferences of behavior on innovation types. Furthermore, a significant positive impact is revealed from product-, process and systematic innovation types on growth...

Metagoverning Collaborative Innovation in Governance Networks

DEFF Research Database (Denmark)

Sørensen, Eva; Torfing, Jacob

2017-01-01

, the current wave of New Public Governance reforms perceives collaboration between relevant and affected actors from the public and private sector as the primary vehicle of public innovation, and tends to see governance networks as potential arenas for collaborative innovation. The new focus on collaborative...... innovation in networks poses a fundamental challenge for public managers, elected politicians, and others aiming to metagovern governance networks. Hence, we claim that a specific metagovernance strategy is needed when the purpose of governance networks is to stimulate efficiency, effectiveness...

Empowerment in the Open Innovation Concept

Directory of Open Access Journals (Sweden)

Aneta Pachura

2016-09-01

Full Text Available The aim of this study is an attempt to interpret the concept of „empowerment” in the perspective of open innovation issues. The text consists of a brief introduction, four sections, and summary. The main background of the research is related to the importance of the social reality of the organisation to evolving paradigms of innovation. In the face of globalization challenges, the innovation management could be interpreted as a specific system based on interdisciplinary analysis of an organisation’s social potential.

THE INNOVATIVE ACTIVITIES OF MORDOVIAN STATE TEACHER TRAINING INSTITUTE

Directory of Open Access Journals (Sweden)

Guseyn Gardash oglu Zeynalov

2013-10-01

Full Text Available The article looks at innovation management at an innovative university. Innovative processes in a modern Russian university including Mordovian State Teacher Training Institute are aimed at accomplishing the following tasks: increasing the readiness of the university staff to innovative activities, their professional mobility and involvement in innovative activities of the university and the region. The article claims it is necessary to continuously create, perfect and manage human resources involved in innovative activities.DOI: http://dx.doi.org/10.12731/2218-7405-2013-8-33

Food innovation: Perspectives for the poultry chain in Brazil

DEFF Research Database (Denmark)

de Barcellos, Marcia Dutra; Ferreira, G. C.; Vieira, L. M.

a multinational company from the poultry sector in Brazil, aiming to investigate its innovative positioning in the market. Visual observation of innovative poultry products was held at retail stores. Results indicate an opportunity for companies to invest in food innovations in the Brazilian market, since......This study analyses consumers' willingness to try innovative products and investigates to what extent food industry innovations are aligned to consumers' demand. We realized a quantitative study with consumers to measure their willingness to innovate and we carried out a case study within...

Innovation capabilities in food and beverages and technology-based innovation projects

NARCIS (Netherlands)

Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

2014-01-01

Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are

Innovation, Learning Organizations and Industrial Relations

DEFF Research Database (Denmark)

Lundvall, Bengt-Åke; Peter Nielsen, Peter

and indirect participation much more frequently than the rest. As more sectors become exposed to the need to engage in incremental product and service innovation the economic potential of diffusing good practices in terms of organization and participation is growing and needs to be reflected in firm strategies...... and public policies aiming at promoting innovation and knowledge creation....

An innovative liquid metal design with worldwide application potential

International Nuclear Information System (INIS)

Quinn, J.E.; Berglund, R.C.

1989-01-01

This paper reports that the United States nuclear program has been faced with major political, economic and technical challenges in recent years. One US program element, the Liquid Metal Reactor, has addressed these challenges in a systematic, focused manner. The result is an innovative modular design incorporating safety features that utilize inherent characteristics. This Advanced Liquid Metal Reactor (ALMR) is based on the PRISM concept, originated by the General Electric Company in 1981. This design should also be attractive in other developed countries that have deployed, and/or are deploying, nuclear power. The design's safety features can achieve neutronic shutdown and decay heat removal without relying on operator action or engineered active safety features. The ALMR utilizes many innovations including: a passive reactor vessel air cooling system for decay heat removal; the use of a sealed reactor assembly; seismic isolation; electromagnetic primary pumps; and an in-vessel fuel transfer machine. The US ALMR design incorporates a metal fuel core as its reference, however, the required safety performance can also be achieved with an oxide core having similar safety features. This flexibility is particularly important when addressing world wide ALMR applications. The reference ALMR reactor module, of which there are nine in a typical 1395 MW e plant, has a -6 meter by -20 meter vessel and a 471 MW thermal output, with a reactor outlet temperature of 485 degrees C and an overall conversion efficiency of 33%. This plant uses a saturated steam cycle and a non-safety grade secondary sodium system

Level 1 and 2 PSA methodology taking into account new design, operating and safety factors. Rev. 1

International Nuclear Information System (INIS)

Jirsa, P.; Patrik, M.

2000-11-01

The status of probabilistic safety assessment (PSA) is discussed (i) in relation to the expected nature of 'revolutionary' innovations and (ii) in the light of the EUR document, summarizing requirements put by European NPP operators on the future NPP design. The aims included: (1) analysis of limitations to the current PSA methodology; (2) specification of physical and operation processes the knowledge of which is necessary to ensure the safety criteria of advanced reactors; (3) summarisation of existing knowledge and description formats of the processes; (4) identification of theoretical and experimental work required to address the problem, preparation of data and computer codes, ensuring traceability to EU developmental programs. (P.A.)

Comparing the innovation effects of support schemes for renewable electricity technologies: A function of innovation approach

International Nuclear Information System (INIS)

Río, Pablo del; Bleda, Mercedes

2012-01-01

The aim of this paper is to provide a comparative assessment of the innovation effects of instruments which support the diffusion of renewable electricity technologies with a functions-oriented technological innovation system perspective. The paper provides a link between two major streams of the literature: the functions of innovation systems and the literature on renewable electricity support schemes. We show that, when a functional perspective is adopted, feed-in tariffs are likely to be superior to other policy instruments (quotas with tradable green certificates and tendering), although they still need to be complemented with other instruments, most importantly, direct R and D support. Furthermore, those innovation effects are affected by the specific design elements of the instruments chosen. - Highlights: ► A comparison of the innovation effects of instruments for the diffusion of renewable technologies. ► A functions-oriented technological innovation system perspective. ► A link between the functions of innovation systems and the literature on renewable electricity support schemes. ► Feed-in tariffs are likely to be superior to other instruments. ► Innovation effects are affected by the specific design elements of instruments.

KNOWLEGMENT, UNIVERSITY AND INNOVATION: HOW THEY ARE RELATED IN KNOWLEDGE-BASED INNOVATION GENERATION

Directory of Open Access Journals (Sweden)

Kelly Cristina Benetti Tonani Tosta

2016-11-01

Full Text Available Universities as generators and diffusers of knowledge are innovation agents when they interact with the environment. The role of the university in support of innovation also depends on the regional context, what means that not all universities need to adopt the same behavior in terms of support to innovation policy. This way it is necessary to study further the relationship between the university and society to promote deeper understanding of each one’s role in this relationship in order to produce innovation. A systematic review of the literature and a documental research were carried out with the purpose of knowing better the area and checking if this perception. Thus, this paper aims to deepen this analysis by conducting a systematic review performed based on the seven basic steps proposed by Jackson et al (2004. Based on this discussion, there were raised documents that describe the functioning of the Brazilian National System of Innovation and from the interface between the results of the systematic review and document analysis, it was designed the role of the university in this system. There were also identified the catalysts factors of innovation that point to the results of academic research that impact on economic development. It is suggested that this paper be followed by empirical research that can demonstrate practical results of the role of universities in innovation.

Pedagogical innovation in teacher teams

DEFF Research Database (Denmark)

Weitze, Charlotte Lærke

2015-01-01

This paper presents findings from a longitudinal design-based research project examining how to enable reflection and pedagogical innovation in teacher teams. The article identifies and analyses the teachers’ learning trajectories and innovative strategies when working together in the IT...... learning designs, the research aims to clarify what kind of knowledge is being developed and shared in the teacher teams, and how this contributes to the organisational learning process. The context is Global Classroom, an innovative synchronous hybrid videoconference concept, where adult students can......-pedagogical Think Tank for Teacher Teams (after this: ITP4T) (Weitze, 2014a), a competence development model, which was developed in an earlier phase of the research project. By using theoretical lenses from innovative knowledge development frameworks to examine the teachers’ utterances, interactions and new...

Practical guidelines for the registration and monitoring of serious traffic injuries, Deliverable 7.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Pérez, K. Weijermars, W.A.M. Amoros, E. Bauer, R. Bos, N. Dupont, E. Filtness, A. Houwing, S. Johannsen, H. Leskovsek, B. Machata, K. Martin, JL. Nuyttens, N. Olabarria, M. Pascal, L. & Van den Berghe, W.

2017-01-01

Safety CaUsation, Benefits and Efficiency (SafetyCube) is a European Commission supported Horizon 2020 project. The project’s main objective is the development of an innovative road safety Decision Support System (DSS) that will enable policy-makers and stakeholders to select and implement the most

Federal Program Encourages Health Service Innovations on Developmental Disabilities

Science.gov (United States)

Nix, Mary P.

2009-01-01

There is always room for improvement in the delivery of health services. This article discusses the U.S. Agency for Healthcare Research and Quality's (AHRQ) Health Care Innovations Exchange (www.innovations.ahrq.gov), a comprehensive program that aims to increase awareness of innovative strategies to meet health service delivery challenges and…

Essays on Innovation Ecosystems in the Enterprise Software Industry

Science.gov (United States)

Huang, Peng

2010-01-01

Innovation ecosystem strategy is often adopted by platform technology owners to seek complementary innovation from resources located outside the firm to exploit indirect network effect. In this dissertation I aim to address the issues that are related to the formation and business value of platform innovation ecosystems in the enterprise software…

Safety aspects and shield design of a Poton irradiator

International Nuclear Information System (INIS)

Mehta, S.K.; Nayak, A.R.; Bongirwar, D.R.; Modi, R.K.; Ramkumar, M.S.

1998-01-01

An irradiation plant, POTON, for irradiation of potatoes and onions is being set up at Nashik. Shield design and safety features of this plant incorporate some novel and innovative features like a compact cell, curved cell boundaries for smooth conveyor movement though the cell labyrinth and conform to ICRP and AERB design safety requirements. The safety features include multiple safety interlocks, audio-visual alarms, scram switches and trip wire for avoiding accidental exposures. (author)

Intercultural virtual student teams open innovating via online social networks

OpenAIRE

Santonen, Teemu

2011-01-01

Effective functioning of geographically dispersed, culturally mixed work team is essential for global business success in the era of open innovation. Therefore it is vital to understand and learn how to innovate in a virtually supported intercultural open innovation environments. This case study is developing and testing virtually supported intercultural open innovation process in context of higher education. Our aim is to develop better teaching solutions for experimental innovation learni...

Focussing innovation strategy for sustainability with the chemical industry as example

NARCIS (Netherlands)

John J. Hageman; Dr. ir. Jan Venselaar

2007-01-01

To make sustainable management and innovation attractive for companies, they need focus. In particular SME's don't have a clear view on where innovation should be aimed at in relation to sustainability. It just seems too complex. At the same time innovation suffers from the 'innovation paradox':

The SISIFO project: Seismic Safety at High Schools

Science.gov (United States)

Peruzza, Laura; Barnaba, Carla; Bragato, Pier Luigi; Dusi, Alberto; Grimaz, Stefano; Malisan, Petra; Saraò, Angela; Mucciarelli, Marco

2014-05-01

For many years, the Italian scientific community has faced the problem of the reduction of earthquake risk using innovative educational techniques. Recent earthquakes in Italy and around the world have clearly demonstrated that seismic codes alone are not able to guarantee an effective mitigation of risk. After the tragic events of San Giuliano di Puglia (2002), where an earthquake killed 26 school children, special attention was paid in Italy to the seismic safety of schools, but mainly with respect to structural aspects. Little attention has been devoted to the possible and even significant damage to non-structural elements (collapse of ceilings, tipping of cabinets and shelving, obstruction of escape routes, etc..). Students and teachers trained on these aspects may lead to a very effective preventive vigilance. Since 2002, the project EDURISK (www.edurisk.it) proposed educational tools and training programs for schools, at primary and middle levels. More recently, a nationwide campaign aimed to adults (www.iononrischio.it) was launched with the extensive support of civil protection volounteers. There was a gap for high schools, and Project SISIFO was designed to fill this void and in particular for those schools with technical/scientific curricula. SISIFO (https://sites.google.com/site/ogssisifo/) is a multidisciplinary initiative, aimed at the diffusion of scientific culture for achieving seismic safety in schools, replicable and can be structured in training the next several years. The students, helped by their teachers and by experts from scientific institutions, followed a course on specialized training on earthquake safety. The trial began in North-East Italy, with a combination of hands-on activities for the measurement of earthquakes with low-cost instruments and lectures with experts in various disciplines, accompanied by specifically designed teaching materials, both on paper and digital format. We intend to raise teachers and students knowledge of the

Influence of Quality Management on the Innovative Performance

Directory of Open Access Journals (Sweden)

António Augusto Cabral Marques Fernandes

2014-12-01

Full Text Available The relationship between total quality management (TQM and innovation has been studied in several investigations. However, there is some disagreement among the researchers. Many authors suggest that the impact of TQM on innovation depends both on the TQM dimensions considered and on the type of innovation. This paper aims at identifying elements of TQM as determinants of innovation outputs of organizations. The conceptual model proposed considers 8 TQM variables (leadership; customer focus; involvement and development of people; management by processes; continuous improvement; relations with suppliers; measuring results; product design as factors that can have impact on 6 innovation outputs (research, development and technological innovation; product innovation; process innovation; organizational innovation; management innovation; marketing innovation. This study is based on empirical data collected through a questionnaire answered by 218 ISO 9001:2008 certified organizations. Generally, it is possible to conclude that the adoption of TQM principles plays a key role in innovation activities. The investigation has interesting practical implications practice. Therefore, the adoption of certain organizational principles can encourage the development of innovation.

Conflicting logics in Public Private Innovation

DEFF Research Database (Denmark)

Nissen, Helle Aarøe

The article explores the interplay between conflicting logics, when private firms interact with potential public customers, as the firms aim to commercialize welfare innovations developed through Public Private Innovation (PPI) projects. Commercialization of welfare innovations in healthcare may...... be challenging, as a ‘not invented here’ (NIH) logic is perceived as present across hospitals in the Danish healthcare system. Based on a study of 17 PPI projects 5 cases are investigated consisting of 5 PPI projects, where 1 extreme case is illustrated in depth. The findings show that firms experience...

Market-Oriented Product Innovation in Small Firms

NARCIS (Netherlands)

Verhees, F.J.H.M.

2005-01-01

Description: This thesis deals with product-innovation in small firms. It aims at a better understanding of the determinants of product innovation in small firms, particularly those determinants that are related to the market orientation of small firms. The focus of the study is on small firms that

The wicked problems of supplier-driven innovation

DEFF Research Database (Denmark)

Christensen, Poul Rind; Munksgaard, Kristin Balslev; Bang, Anne Louise

2017-01-01

Suppliers stand in the wake of a new diversified strategic momentum in the global production network, where innovation is growing in importance. The term “supplier-driven innovation” is coined in contrast to the current hype on user-driven innovation; this paper aims to discuss the wicked problems...

Innovation from the ICT-based service encounter

DEFF Research Database (Denmark)

Henten, Anders

2012-01-01

The pupose of the paper is to develop a framework for analyzing the dynamics of innovations emanating from the ICT-based service encounters. Many innovations are based on the direct encounter between employees and customers, and the paper aims to extend the analysis of such encounters to ICT...

Business Model Innovation in Airlines

Directory of Open Access Journals (Sweden)

Bruno Alencar Pereira

2017-03-01

Full Text Available The business models innovation in airlines can contribute to the creation of value, competitive advantage and profitability with new possibilities of action. The proposed paper aimed to identify the business models adopted by airlines and identify how the innovation occurs at these organizations. The methodology adopted is characterized as empirical, exploratory and descriptive research by multiple case study with three major Brazilian airlines. The results demonstrate that the search for paradigm breaks, related to the dichotomic traditional models of low-cost and full-service, toward hybrid business models occur linearly, as examples highlighted by companies, in which internal changes in business models are considered major organizational innovations.

Innovation networking between stability and political dynamics

DEFF Research Database (Denmark)

Koch, Christian

2004-01-01

of the contribution is to challenge and transcend these notions and develop an understanding of innovation networks as an interplay between stable and dynamic elements, where political processes in innovation are much more than a disruptive and even a counterproductive feature. It reviews the growing number...... of studies that highlight the political aspect of innovation. The paper reports on a study of innovation processes conducted within the EU—TSER-programme and a study made under the banner of management of technology. Intensive field studies in two constellations of enterprises were carried out. One......This contribution views innovation as a social activity of building networks, using software product development in multicompany alliances and networks as example. Innovation networks are frequently understood as quite stable arrangements characterised by high trust among the participants. The aim...

Transient safety performance of the PRISM innovative liquid metal reactor

International Nuclear Information System (INIS)

Magee, P.M.; Dubberley, A.E.; Rhow, S.K.; Wu, T.

1988-01-01

The PRISM sodium-cooled reactor concept utilizes passive safety characteristics and modularity to increase performance margins, improve licensability, reduce owner's risk and reduce costs. The relatively small size of each reactor module (471 MWt) facilitates the use of passive self-shutdown and shutdown heat removal features, which permit design simplification and reduction of safety-related systems. Key to the transient performance is the inherent negative reactivity feedback characteristics of the core design resulting from the use of metal (U-Pu-Zr) swing, and very low control rod runout worth. Selected beyond design basis events relying only on these core design features are analyzed and the design margins summarized to demonstrate the advancement in reactor safety achieved with the PRISM design concept

Safety consequences of crew innovation onboard shortsea ships

NARCIS (Netherlands)

Post, W.M.; Langefeld, J.J.

2011-01-01

We have investigated an alternative assignment of manning on board Dutch coasters to show that the current level of safety is maintained when mono disciplinary Chief Engineers are replaced by Marof: Maritime Officers, who have received education in navigational as well as engineering skills (at

Proceedings (slides) of the OECD/NEA Workshop on Innovations in Water-cooled Reactor Technologies

International Nuclear Information System (INIS)

Spiler, Joze; Kim, Sang-Baik; ); Feron, Fabien; Jaervinen, Marja-Leena; Husse, Julien; ); Ferraro, Giovanni; Bertels, Frank; Denk, Wolfgang; Tuomisto, Harri; Golay, Michael; Buongiorno, J.; Todreas, N.; Adams, E.; Briccetti, A.; Jurewicz, J.; Kindfuller, V.; Srinivasan, G.; Strother, M.; Minelli, P.; Fasil, E.; Zhang, J.; Genzman, G.; Epinois, Bertrand de l'; Kim, Shin Whan; Laaksonen, Jukka; Maltsev, Mikhail; Yu, CHongxing; Powell, David; Gorgemans, Julie; Hopwood, Jerry; Bylov, Igor; Bakhmetyev, Alexander M.; Lepekhin, Andrey N.; Fadeev, Yuriy P.; Bruna, Giovanni; Gulliford, Jim; ); Ham-Su, Rosaura; Thevenot, Caroline; GAUTIER, Guy-Marie; MARSAULT, Philippe; PIGNATEL, Jean-Francois; White, Andrew; )

2015-02-01

New technologies and solutions have been developed over more than thirty years to improve the safety, performance and economics of nuclear power plants. Particular efforts were made in designing systems to prevent or mitigate nuclear accidents and, greatly limit or even avoid any offsite release of radioactivity. Reactor designs developed in the 1980's and later are often referred to as Generation III (Gen III) reactors. They offer enhanced safety compared to earlier Generation II (Gen II) designs, as well as improved performance and economics. Examples of Gen III safety design features include solutions for corium localisation, advanced containment structures, improved emergency core-cooling systems, filtered venting systems, hydrogen risk management solutions, etc. Some of these solutions have also been back-fitted or partially adapted to existing reactors, based on recommendations from regulators or modernisation efforts by the utilities operating these reactors, to bring their level of safety to levels approaching those of the more modern designs. Other innovations found in the latest water-cooled reactor designs include the use of passive safety systems, and often associated with those, a simplification in the design of the reactor. Gen III reactors also feature better economics, for example increased design lifetime up to 60 years, ability to use 100% MOX fuel and operate with higher flexibility, higher thermal efficiencies and reduced staff requirements. Modularity is often quoted as a feature of some Gen III designs as a way of reducing the construction times and simplifying the decommissioning of the plant. The scope of the Workshop includes, inter alia: - Evolution of regulatory and design requirements for commercial water-cooled reactors; - Innovations in water-cooled reactor technologies that allowed significant improvement in the level of safety, with a discussion on advantages and challenges of active vs. passive safety systems; - Innovations under

Innovation for the future of Irish MedTech industry: retrospective qualitative review of impact of BioInnovate Ireland’s clinical fellows

Science.gov (United States)

McGloughlin, Elizabeth Kate; Anglim, Paul; Keogh, Ivan; Sharif, Faisal

2018-01-01

Clinicians have historically been integral in innovating and developing technology in medicine and surgery. In recent years, however, in an increasingly complex healthcare system, a doctor with innovative ideas is often left behind. Transition from idea to bedside now entails significant hurdles, which often go unrecognised at the outset, particularly for first-time innovators. The BioInnnovate Ireland process, based on the Stanford Biodesign Programme (Identify, Invent and Implement), aims to streamline the process of innovation within the MedTech sector. These programmes focus on needs-based innovation and enable multidisciplinary teams to innovate and collaborate more succinctly. In this preliminary study, the authors aimed to examine the impact of BioInnovate Ireland has had on the clinicians involved and validate the collaborative process. To date, 13 fellows with backgrounds in clinical medicine have participated in the BioInnovate programme. Ten of these clinicians remain involved in clinical innovation projects with four of these working on Enterprise Ireland funded commercialisation grants and one working as chief executive officer of a service-led start-up, Strive. Of these, five also remain engaged in clinical practice on a full or part-time basis. The clinicians who have returned to full-time clinical practice have used the process and learning of the programme to influence their individual clinical areas and actively seek innovative solutions to meet clinical challenges. Clinicians, in particular, describe gaining value from the BioInnovate programme in areas of ‘Understanding Entrepreneurship’ and ‘Business Strategy’. Further study is needed into the quantitative impact on the ecosystem and impact to other stakeholders. PMID:29599999

New business models for antibiotic innovation.

Science.gov (United States)

So, Anthony D; Shah, Tejen A

2014-05-01

The increase in antibiotic resistance and the dearth of novel antibiotics have become a growing concern among policy-makers. A combination of financial, scientific, and regulatory challenges poses barriers to antibiotic innovation. However, each of these three challenges provides an opportunity to develop pathways for new business models to bring novel antibiotics to market. Pull-incentives that pay for the outputs of research and development (R&D) and push-incentives that pay for the inputs of R&D can be used to increase innovation for antibiotics. Financial incentives might be structured to promote delinkage of a company's return on investment from revenues of antibiotics. This delinkage strategy might not only increase innovation, but also reinforce rational use of antibiotics. Regulatory approval, however, should not and need not compromise safety and efficacy standards to bring antibiotics with novel mechanisms of action to market. Instead regulatory agencies could encourage development of companion diagnostics, test antibiotic combinations in parallel, and pool and make transparent clinical trial data to lower R&D costs. A tax on non-human use of antibiotics might also create a disincentive for non-therapeutic use of these drugs. Finally, the new business model for antibiotic innovation should apply the 3Rs strategy for encouraging collaborative approaches to R&D in innovating novel antibiotics: sharing resources, risks, and rewards.

Chosen aspects of innovative projects management

Directory of Open Access Journals (Sweden)

J. Gawlik

2010-07-01

Full Text Available Any company willing to maintain its market position has to search and implement innovative products and services. Integrated development ofenterprise’s innovative activity requests a constant search for new technologies and new organizational forms. Ability of effectivemanagement of innovative projects becomes a crucial issue. The paper presents a characteristic of innovative projects accordingly toOECD standards. Project management concepts based on Project Management Institute (PMI and International Project ManagementAssociation (IPMA procedures have been discussed. Key success factors have been defined, i.e.: obtaining assumed project outcome (range, project implementation conform to planned schedule (deadline, maintaining project costs under a certain limit (budget, quality (are the customers satisfied?, resources (team losses and interpersonal relations. Tables comparing product innovativeness with fields of requested know – how for particular product innovativeness levels have been elaborated. Finally, SCRUM method of adaptive project management aiming at providing possibly optimal outcome has been described.

Innovative Procurement and Partnerships in Facilities Management

DEFF Research Database (Denmark)

Jensen, Per Anker

2010-01-01

strong requirements on the management style and company culture. Limitations of the research: The research is only based on two case studies, which obviously limits the possibility to generalize the results. Practical applications: The research presents two specific examples of innovative procurement......Aim: The aim of the paper is to present, analyse and identify learning from two case studies of innovative procurement in Facilities Management (FM) concerning the establishments of partnerships between clients and providers. Approach and methodology: A major study of FM best practice covering 36...

Towards consumer driven and innovative fruit supply chains

NARCIS (Netherlands)

Wiersinga, R.C.; Hiller, S.R.C.H.; Zimmerman, K.L.

2012-01-01

This paper aims to identify supply chain organization and management structures that maximize innovation in consumer driven fruit supply chains with the ultimate goal of increasing European fruit consumption. Data was collected on the chain organization, management structures and innovativeness of

A proactive method for safety management in nuclear facilities

International Nuclear Information System (INIS)

Grecco, Claudio Henrique dos Santos; Carvalho, Paulo Victor Rodrigues de; Santos, Isaac Antonio Luquetti dos

2014-01-01

Due to the modern approach to address the safety of nuclear facilities which highlights that these organizations must be able to assess and proactively manage their activities becomes increasingly important the need for instruments to evaluate working conditions. In this context, this work presents a proactive method of managing organizational safety, which has three innovative features: 1) the use of predictive indicators that provide current information on the performance of activities, allowing preventive actions and not just reactive in safety management, different from safety indicators traditionally used (reactive indicators) that are obtained after the occurrence of undesired events; 2) the adoption of resilience engineering approach in the development of indicators - indicators are based on six principles of resilience engineering: top management commitment, learning, flexibility, awareness, culture of justice and preparation for the problems; 3) the adoption of the concepts and properties of fuzzy set theory to deal with subjectivity and consistency of human trials in the evaluation of the indicators. The fuzzy theory is used primarily to map qualitative models of decision-making, and inaccurate representation methods. The results of this study aim an improvement in performance and safety in organizations. The method was applied in a radiopharmaceutical shipping sector of a nuclear facility. The results showed that the method is a good monitoring tool objectively and proactively of the working conditions of an organizational domain

Gas. Innovators talking; Gas. Innovators aan het woord

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-02-15

Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on gas [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar gas.

Gas. Innovators talking; Gas. Innovators aan het woord

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-02-15

Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on gas [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar gas.

Federal Strategies for Inducing Technological Innovation in the Auto Industry

Science.gov (United States)

1978-03-01

The present document is intended to provide background information on the innovation process and the spectrum of alternative Federal strate??ies for achieving National automotive goals in the areas of safety, fuel economy and emissions. A narrative...

'Mind the gap' between the development of therapeutic innovations and the clinical practice in oncology: A proposal of the European Organisation for Research and Treatment of Cancer (EORTC) to optimise cancer clinical research.

Science.gov (United States)

Kempf, Emmanuelle; Bogaerts, Jan; Lacombe, Denis; Liu, Lifang

2017-11-01

In Europe, most of the cancer clinical research dedicated to therapeutic innovations aims primarily at regulatory approval. Once an anticancer drug enters the common market, each member state determines its real-world use based on its own criteria: pricing, reimbursement and clinical indications. Such an innovation-centred clinical research landscape might neglect patient-relevant issues in real-world setting, such as comparative effectiveness of distinct treatment options or long-term safety monitoring. The European Organisation for Research and Treatment of Cancer (EORTC) advocates reforming the current 'innovation-centred' system to a truly 'patient-centred' paradigm with systematically coordinated applied clinical research in conjunction with drug development, featuring the following strategy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Gender diversity and innovation in manufacturing and service firms

OpenAIRE

Segarra Blasco, Agustí, 1958-; Parra, Maria Dolores; Teruel, Mercedes

2015-01-01

Traditionally, researchers have considered the innovation process as being gender neutral. However, recently some studies have begun to take gender diversity into account as a determinant of firms’ innovation. This paper aims to analyse how the effect of gender diversity on innovation output at firm level is sensitive to team size. Using the Spanish PITEC (Panel de Innovación Tecnológica) from 2007 to 2012 for innovative manufacturing and service firms, we estimate...

CATEGORICAL TOOL OF INNOVATIVE LABOR PROVIDING IN MODERN CONDITIONS

OpenAIRE

Chernoivanova, Anna

2017-01-01

The article aims to study theoretical foundations of providing innovative work in modern conditions based on systematizing categorical tools. As a result of the study we found out the innovative work features and singled it out among other related to it categories such as “creative work”, “intellectual work”, “labor management”; summarized theoretical propositions about the nature of innovation work and clarified its definition. Classification of innovative work was grounded. The features of ...

Safety regulation : The lessons of workplace safety rule management for managing the regulatory burden

NARCIS (Netherlands)

Hale, A.R.; Borys, D.; Adams, M.

2012-01-01

There is a strong political consensus in a number of countries that occupational safety and health regulation is stifling industrial innovation and development and is feeding a culture of damaging risk aversion and petty bureaucracy. In a number of countries this has led to proposals to repeal

The concept of responsiveness in the governance of research and innovation

DEFF Research Database (Denmark)

Nielsen, Morten Velsing

2016-01-01

Responsiveness has become a central concept in the increasing debate on responsible research and innovation (RRI), which aims to define new objectives for research and innovation (R&I) governance. This article aims to elaborate on the different understandings of responsiveness as an input to the ...

Building the Child Safety Collaborative Innovation and Improvement Network: How does it work and what is it achieving?

Science.gov (United States)

Leonardo, Jennifer B; Spicer, Rebecca S; Katradis, Maria; Allison, Jennifer; Thomas, Rebekah

2018-02-16

This study investigated whether the Child Safety Collaborative Innovation and Improvement Network (CS CoIIN) framework could be applied in the field of injury and violence prevention to reduce fatalities, hospitalizations and emergency department visits among 0-19 year olds. Twenty-one states/jurisdictions were accepted into cohort 1 of the CS CoIIN, and 14 were engaged from March 2016 through April 2017. A quality improvement framework was used to test, implement and spread evidence-based change ideas (strategies and programs) in child passenger safety, falls prevention, interpersonal violence prevention, suicide and self-harm prevention and teen driver safety. Outcome and process measure data were analyzed using run chart rules. Descriptive data were analyzed for participation measures and descriptive statistics were produced. Qualitative data were analyzed to identify key themes. Seventy-six percent of CS CoIIN states/jurisdictions were engaged in activities and used data to inform decision making. Within a year, states/jurisdictions were able to test and implement evidence-based change ideas in pilot sites. A small group showed improvement in process measures and were ready to spread change ideas. Improvement in outcome measures was not achieved; however, 25% of states/jurisdictions identified data sources and reported on real-time outcome measures. Evidence indicates the CS CoIIN framework can be applied to make progress on process measures, but more time is needed to determine if this will result in progress on long-term outcome measures of fatalities, hospitalizations and emergency department visits. Seventeen states/jurisdictions will participate in cohort 2. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Classification of innovations: approaches and consequences

Directory of Open Access Journals (Sweden)

Jakub Tabas

2011-01-01

Full Text Available Currently, innovations are perceived as a life blood of businesses. The inevitable fact is that even if the innovations have a potential to transform the companies or all the industries, the innovations are high risky. Even though, the second fact is that in order to companies’ development and their survival on the markets, the innovations have become the necessity. In the theory, it is rather difficult to find a comprehensive definition of innovation, and to settle down a general definition of innovation becomes more and more difficult with the growing number of domains where the innovations, or possible innovations start to appear in a form of added value to something that already exist. Definition of innovation has come through a long process of development; from early definition of Schumpeter who has connected innovation especially with changes in products or production processes, to recent definitions based on the added value for a society. One of possible approaches to define the content of innovation is to base the definition on classification of innovation. In the article, the authors provide the analysis of existing classifications of innovations in order to find, respectively in order to define the general content of innovation that would confirm (or reject their definition of innovation derived in the frame of their previous work where they state that innovation is a change that leads to gaining profit for an individual, for business entity, or for society, while the profit is not only the accounting one, but it is the economic profit.The article is based especially on the secondary research while the authors employ the method of analysis with the aim to confront various classification-based definitions of innovation. Then the methods used are especially comparison, analysis and synthesis.

Towards a conceptual framework for Experience-Driven Innovation

NARCIS (Netherlands)

Schifferstein, H.N.J.; Kleinsmann, M.S.; Jepma, E.J.

2012-01-01

Companies that aim to evoke specific experiences among their customers, should not only modify their design process, but also need to reorganize their innovation processes. Experience-driven innovation has implications on at least three levels in the organization: company, brand, and product/service

CONSUMERS' PERCEPTION ON INNOVATION IN THE TOURISM VALUE CHAIN

Directory of Open Access Journals (Sweden)

Ravar Anamaria Sidonia

2013-07-01

Full Text Available In the current economic environment, innovation is considered critical by the majority of tourism companies that are increasingly willing to spend more to become more innovative. This tendency is visible in all segments of the tourism value chain: accommodation services, transportation, intermediaries – travel agencies and tour-operators – as well at entertainment and leisure facilities. The final aim of innovation in tourism enterprises is to increase customer satisfaction and thus secure the enterprises' competitive advantage on a continuously changing market. Thus, consumers' perception on innovation is relevant not only to academics and researchers, but especially to organisations in the business environment, which use customer feedback in order to develop innovative products which are better suited to the individual needs of tourists. The purpose of this article is to determine how consumers of tourist services perceive innovation in the various segments of the tourism value chain. The results will indicate the perceived intensity with which innovation is implemented in the tourism industry as well as the sectors in which innovation could bring additional benefits to tourists. To this aim, it was conducted a literature review on the main types of innovations in hospitality, airline transportation and travel intermediaries, as well as a pilot questionnaire-based study on 120 regular consumers of tourist services. Results indicate a discrepancy between the importance tourists give to innovation and the actual perceived level of innovation in the tourism value chain. Furthermore, the research shows the importance of innovation in different segments of the tourism value chain in the purchase decision of a tourism product. Unfortunately, results indicate that Romanian tourism operators' perceived innovativeness is lower in comparison with foreign tourism operators. The study is exploratory, representing a starting point into a more

Social Innovation in the Hungarian Business Sphere

Science.gov (United States)

Szegedi, Krisztina; Fülöp, Gyula; Bereczk, Ádám

2016-01-01

The development of society in various ways is central to social innovation and corporate social responsibility (CSR). CSR involves deliberate acts of companies, and can lead to social innovation either in themselves or through cooperation with other social stakeholders. The aims of this study are: (1) to describe the concepts of corporate social…

Care work and diffusion of innovation in Danish elder care

DEFF Research Database (Denmark)

Langergaard, Luise Li

2017-01-01

This article explores the interplay between different types of knowledge and rationality in care work through a case study of a nursing home innovation project in a Danish municipality. The aim is to understand the implications for innovation processes and dissemination within the context of elde...... in care work practices and innovation, and it indicates that communities of practice could be key to understanding how to share and learn from best practices across organizations.......This article explores the interplay between different types of knowledge and rationality in care work through a case study of a nursing home innovation project in a Danish municipality. The aim is to understand the implications for innovation processes and dissemination within the context of elder...... care. Care work, in some sense, relies on relational and contextual knowledge which may lead to challenges when innovation and best practices are to be diffused across organizations. This is especially true since diffusion often relies on codification of practices and knowledge. Caring rationality...

The Impact of Clustering on the Innovativeness Of Furniture Industry

Directory of Open Access Journals (Sweden)

Grzegorzewska Emilia

2014-06-01

Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

Diffusing Aviation Innovations in a Hospital in the Netherlands

NARCIS (Netherlands)

D.F. de Korne (Dirk); J.D.H. van Wijngaarden (Jeroen); U.F. Hiddema (Frans); F.G. Bleeker (Fred); P.J. Pronovost (Peter); N.S. Klazinga (Niek)

2010-01-01

textabstractBackground: Many authors have advocated the diffusion of innovations from other high-risk industries into health care to improve safety. The aviation industry is comparable to health care because of its similarities in (a) the use of technology, (b) the requirement of highly specialized

Diffusing aviation innovations in a hospital in The Netherlands

NARCIS (Netherlands)

de Korne, Dirk E.; van Wijngaarden, Jeroen D. H.; Hiddema, U. Frans; Bleeker, Fred G.; Pronovost, Peter J.; Klazinga, Niek S.

2010-01-01

BACKGROUND: Many authors have advocated the diffusion of innovations from other high-risk industries into health care to improve safety. The aviation industry is comparable to health care because of its similarities in (a) the use of technology, (b) the requirement of highly specialized professional

Managing regional innovation strategy projects

OpenAIRE

Wolf, Patricia; Hanisch, Christoph

2014-01-01

This paper presents a qualitative interview study with 28 RIS project managers that aimed at understanding whether or not this is true in the context of regional innovation and what the specifics of managing regional innovation projects are. In taking up a recent claim for policy intervention studies which allow to “derive precise suggestions for their design and management”.  The study investigated the interrelation between the agility of the management approach and the achievements of RIS p...

BUSINESS MODEL INNOVATION IN NIGERIAN HIGHER EDUCATION INSTITUTIONS

OpenAIRE

Nonso Ochinanwata; Patrick Oseloka Ezepue

2017-01-01

This paper explores business model innovation that aims to innovate the Nigerian higher education sector. A focus group and semi-structured interviews among higher education Nigerian academics, students and graduates are used to explore the new business model for Nigerian higher education. The study found that, to achieve efficient and effective innovation, Nigerian higher education institutions need to collaborate with industry, professionals and other stakeholders, such as company managemen...

Innovation, systemic appropriation and prevention in the granite mining sector: The case of humidification.

Science.gov (United States)

Mendes, R W B; Pueyo, V; Béguin, P; Duarte, F J C M

2017-01-01

This research was conducted in the Brazilian granite mining sector. After epidemiological studies, it was established that professional pneumoconiosis is related to the inhalation of dust. Therefore, the Brazilian mining health and safety regulatory standard made it compulsory to provide humidification throughout the extraction and mineral treatment processes. To develop the concept of systemic appropriation of the technological innovations that aim to protect the worker's health. Until now, appropriation has usually been presented in its individual dimensions. In this article, the focus is placed on the collective and organizational aspects of this appropriation. Two methodological approaches were used: interviews with the different individuals involved in order to report the history of the implementation of technical devices which meet the humidification norm; and ergonomic analysis of the work of the operators who used these devices. The appropriation of the technical devices occurred at two distinct levels: 1) Individual, related to the direct contact of the operator with the instrument; 2) Systemic, as the effects of the innovation propagated through the system affecting interdependent tasks, adaptation of the work organization and new production strategies. The implementation of prevention norms require innovations which are necessarily accompanied by transformations in the companies' techniques, work and management.

Eco-Innovation Manual

DEFF Research Database (Denmark)

O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing compa...... companies to improve their sustainability performance....

Modelling safety of multistate systems with ageing components

Energy Technology Data Exchange (ETDEWEB)

Kołowrocki, Krzysztof; Soszyńska-Budny, Joanna [Gdynia Maritime University, Department of Mathematics ul. Morska 81-87, Gdynia 81-225 Poland (Poland)

2016-06-08

An innovative approach to safety analysis of multistate ageing systems is presented. Basic notions of the ageing multistate systems safety analysis are introduced. The system components and the system multistate safety functions are defined. The mean values and variances of the multistate systems lifetimes in the safety state subsets and the mean values of their lifetimes in the particular safety states are defined. The multi-state system risk function and the moment of exceeding by the system the critical safety state are introduced. Applications of the proposed multistate system safety models to the evaluation and prediction of the safty characteristics of the consecutive “m out of n: F” is presented as well.

Modelling safety of multistate systems with ageing components

International Nuclear Information System (INIS)

Kołowrocki, Krzysztof; Soszyńska-Budny, Joanna

2016-01-01

An innovative approach to safety analysis of multistate ageing systems is presented. Basic notions of the ageing multistate systems safety analysis are introduced. The system components and the system multistate safety functions are defined. The mean values and variances of the multistate systems lifetimes in the safety state subsets and the mean values of their lifetimes in the particular safety states are defined. The multi-state system risk function and the moment of exceeding by the system the critical safety state are introduced. Applications of the proposed multistate system safety models to the evaluation and prediction of the safty characteristics of the consecutive “m out of n: F” is presented as well.

Assessing construction innovation: theoretical and practical perspectives

Directory of Open Access Journals (Sweden)

Peter Davis

2016-09-01

Full Text Available Innovation is key for productivity improvement and advancements in different sectors of the economy, including the construction sector.  The criticism of the slow pace of innovation in construction industry may be unwarranted, considering the structure of the industry and nature of the construction business.  The loosely coupled nature of firms, mostly Small and Medium Enterprises (SME’s, delivering ‘projects’ through partial engagement, together with the distinction between the project innovation and firm innovation makes it difficult to extract innovations in a meaningful way.  The problem also lies in conceptualising, defining, articulating and assessing innovation in construction.  The literature is replete with research into construction innovation, however, there is limited research into understanding how innovation is perceived and narrated in practice.  The paper aims to explore how innovation is assessed and narrated in construction, specifically analysing theory and practice perspectives.  A theoretical model was constructed from a structured literature review illustrating existing discourse and narratives of construction innovation assessment.  A qualitative analysis of ‘Professional Excellence in Building’ submission documents to the Australian Institute of Building was performed to identify the practice perspective of innovation.  The findings suggest that internal organizational and process innovation account for the majority of improvements identified.  Importantly a taxonomy of narrative is developed that articulates how the construction industry in Australia views industry innovation.

Analyzing Innovation Systems (Burkina Faso) | CRDI - Centre de ...

International Development Research Centre (IDRC) Digital Library (Canada)

This project aims to improve the efficiency of the nascent innovation system in Burkina Faso by strengthening exchanges between researchers, inventors and innovators and public ... L'Initiative des conseils subventionnaires de la recherche scientifique en Afrique subsaharienne remporte le prix de la diplomatie scientifique.

Exploring product and service innovation similarities and differences

NARCIS (Netherlands)

Nijssen, E.J.; Hillebrand, B.; Vermeulen, P.A.M.; Kemp, R.G.M.

2006-01-01

This paper aims to provide an initial step towards a synthesis of new service and new product development research. Using a baseline model of innovation, applicable to innovation in general, we hypothesize differential context effects between new service and product development in order to better

Success Determination by Innovation: A Theoretical Approach in Marketing

OpenAIRE

Raj Kumar Gautam

2012-01-01

The paper aims at to identify the main issues in the marketing which needs immediate attention of the marketers. The importance of innovation in the marketing has also been highlighted and marketing mix have been related to innovative and creative ideas. The study is based on the secondary data, various research papers, articles has been studied to develop a innovative approach in the marketing. Marketing innovative ideas relating to business lead generation, product, price, distribution, pro...

Ways to Stimulate and Promote Innovation in Entrepreneurship in the Coastal Area

Directory of Open Access Journals (Sweden)

Liudmila Rosca-Sadurschi

2012-08-01

Full Text Available In order to maintain competitive power of enterprises and its share of market sales, thecompany must periodically rebuild the forces of production, modernization of existing material and technical base, increase production, adoption of new types of activity. Obviously it presupposes that the launch of competitive products, "innovation" in the maintenance of safety, the ethnically appropriate, applying clean technologies, all being provided currently effective innovation policy. International practice analysis says that one of the main objectives of innovation policy at the state level should be: to ensure and support the initiative of all participants in the development of scientific and technical progress. As with any political, innovation policy can not fit all countries, but has the same purpose: to stimulate business innovation and development of scientific and technical potential. Depending on the country's potential, they choose their forms and methods of state regulation of innovative activity.

ORGANIZATIONAL-ECONOMIC ASPECTS OF THE DEVELOPMENT AND OPERATION OF SMALL INNOVATIVE BUSINESS

Directory of Open Access Journals (Sweden)

M. Ya. Veselovsky

2016-01-01

Full Text Available The article examines problems of development and functioning of small innovation entrepreneurship in Russia, discusses their advantages and disadvantages. Statistical indicators of development of innovations in recent years in the context of the report "Global innovation index". The authors off er interventions aimed at the expansion of reproduction of high technologies for the further development of innovation in the Russian Federation. Critically considers the opinions of various experts in forecasting the development of macroeconomic situation in Russia. Conclusions about the necessity of the innovation process in the economy.Purposes / tasks. The aim of the article is elaboration of measures aimed at enhancing the reproduction of high technology for processes of development and implementation of innovations in the field of engineering, technology, Economics, organization and management.Tasks of the article: to analyze and isolate problems pertaining to:• the state of innovation activities in Russia;• a weak small innovative enterprises;• state stimulation of small innovative enterprises;• increase the pace of development of small business in innovative sphere of the country.Methodology. In conducting this research the main sources of baseline data were the materials of state statistics, data from Rosstat and excerpts from Government programs. The basis of methodological developments based on a descriptive, comparative method and morphological analysis. They are allowed to perform all of the necessary information and to draw conclusions on this work.Results. This broad concept to small innovative entrepreneurship, analysed its current status in Russia, given his brief analysis of the advantages and disadvantages. Shown low efficiency of functioning and development of small enterprises in General. Analyzes the dynamics of the positions of the Russian Federation the report "Global innovation index": 2014–2016, as well as Russian and

AMNT 2014. Key Topic: Reactor operation, safety - report. Pt. 1

International Nuclear Information System (INIS)

Schaffrath, Andreas

2014-01-01

Summary report on one session of the Annual Conference on Nuclear Technology held in Frankfurt, 6 to 8 May 2014: - Safety of Nuclear Installations - Methods, Analysis, Results: Backfittings for the Improvement of Safety and Efficiency. The other Sessions of the Key Topics 'Reactor Operation, Safety', 'Competence, Innovation, Regulation' and 'Fuel, Decommissioning and Disposal' will be covered in further issues of atw.

The cross-border project between France and Italy MARS+. Sub-project - Innovative technologies for the mechanization of the areas hard to reach

Directory of Open Access Journals (Sweden)

G. Tirrò

2013-09-01

Full Text Available The care and protection of the mountain areas and their traditional crops were some of the reasons that led regional governments of Liguria and Tuscany to participate in the strategic project “Sea, Countryside and Land: potentiate the strategic unitarily” (MARS +. This project has also involved the participation of the four cross-border regions: Tuscany (leader, Sardinia, Liguria and Corsica. The aim was to promote the development of the innovations and entrepreneurship in the rural areas in order to increase competitiveness. In particular, the subproject SC has provided the transfer of innovations to facilitate the processes of mechanization in vineyards and olive orchards in contexts defined as “heroic”, areas of high landscape and environmental value in which the typical cultures has been always carried out, generally, on terraces or slopes. These conditions require a great effort by the farmers and result in high production costs. The transfer of the innovations has provided the organization of demonstration days in which the technological solutions for the management of the farming operations in vineyards and olive orchards were proposed and tested. During these events, the participative process was fundamentally reconfirmed, not only as a means to expand the knowledge of innovative products, but also as an opportunity for farmers, retailers, manufacturers, researchers, and local administrators to interact and facilitate the development of other technologies. The parameters that led to the innovative solutions included: the small size, user-friendliness, agility, and the ability of operating on systems not easily accessible. These products must also ensure the ergonomics and safety of workers performing all the growing operations. A thorough research of the available technologies and prototypes, still under development, affirms the presence of many innovations. These innovations not only allow the execution of all the field

ALWR safety approaches and trends. Implementation of passive safety features in the design

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, V

1995-11-01

Reactor vendors world-wide are examining various advanced light water reactors (ALWR) options to reach utility goals. The amount of information available about each design varies essentially depending on its maturity. Some advanced reactor designs are the evolutionary results of combining old structures, systems and components in new ways, others use innovative solutions. A summary review is given for better understanding of new ALWR design trends and approaches in different countries and subsequent R and D activities. An attempt was made to describe and assess specific innovative and passive features implemented in the leading ALWR designs for further plant design safety improvements. The advantages and disadvantages of these innovations in obtaining reliable systems have been considered. Also, this report indicates the importance of uncertainties remaining and identifies the additional work needed. 51 refs, 27 figs, 7 tabs.

ALWR safety approaches and trends. Implementation of passive safety features in the design

International Nuclear Information System (INIS)

Ignatiev, V.

1995-11-01

Reactor vendors world-wide are examining various advanced light water reactors (ALWR) options to reach utility goals. The amount of information available about each design varies essentially depending on its maturity. Some advanced reactor designs are the evolutionary results of combining old structures, systems and components in new ways, others use innovative solutions. A summary review is given for better understanding of new ALWR design trends and approaches in different countries and subsequent R and D activities. An attempt was made to describe and assess specific innovative and passive features implemented in the leading ALWR designs for further plant design safety improvements. The advantages and disadvantages of these innovations in obtaining reliable systems have been considered. Also, this report indicates the importance of uncertainties remaining and identifies the additional work needed. 51 refs, 27 figs, 7 tabs

Innovating Science Teaching by Participatory Action Research--Reflections from an Interdisciplinary Project of Curriculum Innovation on Teaching about Climate Change

Science.gov (United States)

Feierabend, Timo; Eilks, Ingo

2011-01-01

This paper describes a three-year curriculum innovation project on teaching about climate change. The innovation for this study focused on a socio-critical approach towards teaching climate change in four different teaching domains (biology, chemistry, physics and politics). The teaching itself explicitly aimed at general educational objectives,…

Innovative Characteristics of Small and Medium Enterprises

Directory of Open Access Journals (Sweden)

Barbara Bigliardi

2011-06-01

Full Text Available The purpose of the paper is to investigate the technological innovative characteristics in the Small and Medium Enterprises (SMEs belonging to the Italian manufacturing sector. A survey based on e-mail and fax questionnaire of 285 SMEs was conducted with a response rate of about 45%. On the basis of this survey, the innovative profile of SMEs has been highlighted as well as the factors and problems of innovative process analyzed. The methodology consisted in a descriptive analysis on general data and in a discriminant analysis on data related to the innovative activity and aimed at determine the factors distinguishing more and less innovative companies. The results show that innovative firms are market anticipation and customer focus, point to product enrichment in terms of different characteristics in respect to competitors’ products in order to obtain a superior product in terms of quality. Innovation results to be part of their business strategy and is based more around developing new ways of working than new product innovations.

Firm Readiness Level for Innovation Projects: A New Decision-Making Tool for Innovation Managers

Directory of Open Access Journals (Sweden)

Daniel Galvez

2018-03-01

Full Text Available Innovation projects represent a major challenge for business managers due to their associated uncertainty degree. The already existing methodologies to support the innovation projects are aimed at piloting them and establishing the management stages in a flexible and agile way during their deployment. This paper proposes a complementary ex-ante methodology that seeks to aid the decision-making of companies to choose whether or not to launch a potential innovation project. This methodology evaluates to what extent the technological system of the company has the minimum required maturity degree of competencies to successfully achieve the innovation project. Thus, in first instance, an innovation project is characterized according to its novelty degree; both inside the company and in its environment. Subsequently, according to the previous characterization, the future project will have an impact on the technological system of the company. The capabilities of the firm are represented by a set of good practices associated with the innovation projects’ management that the company is able to deploy. Finally, the minimum maturity degree required by a particular project of these practices is determined. Then, the gap between the maturity requirement profile and the current profile of the company is established enabling to decide on the implementation of the project or not.

Stimulating Firm Innovativeness: Probing the Interrelations between Managerial and Organizational Determinants

NARCIS (Netherlands)

O.R. Mihalache (Oli)

2012-01-01

textabstractInnovation is the engine of sustained organizational performance and is central to organizations’ competitive advantage. This thesis aims to further the understanding of how firms can stimulate two types of innovation outcomes: i) product and service innovation, and ii) management

Defining Innovation in Neurosurgery: Results from an International Survey.

Science.gov (United States)

Zaki, Mark M; Cote, David J; Muskens, Ivo S; Smith, Timothy R; Broekman, Marike L

2018-06-01

Innovation is a part of the daily practice of neurosurgery. However, a clear definition of what constitutes innovation is lacking and opinions vary from continent to continent, from hospital to hospital, and from surgeon to surgeon. In this study, we distributed an online survey to neurosurgeons from multiple countries to investigate what neurosurgeons consider innovative, by gathering opinions on several hypothetical cases. The anonymous survey consisted of 52 questions and took approximately 10 minutes to complete. A total of 355 neurosurgeons across all continents excluding Antarctica completed the survey. Neurosurgeons achieved consensus (>75%) in considering specific cases to be innovative, including laser resection of meningioma, focused ultrasonography for tumor, oncolytic virus, deep brain stimulation for addiction, and photodynamic therapy for tumor. Although the new dura substitute case was not considered innovative, there was consensus among neurosurgeons indicating that institutional review board approval was still necessary to maintain ethical standards. Furthermore, although 90% of neurosurgeons considered an oncolytic virus for glioblastoma multiforme to be innovative, only 78% believed that institutional review board approval was necessary before treatment. Our results indicate that innovation is a heterogeneous concept among neurosurgeons that necessitates standardization to ensure appropriate patient safety without stifling progress. We discuss both the ethical drawbacks of not having a clear definition of innovation and the challenges in achieving a unified understanding of innovation in neurosurgery and offer suggestions for uniting the field. Copyright © 2018 Elsevier Inc. All rights reserved.

An innovative plate heat exchanger of enhanced compactness

International Nuclear Information System (INIS)

Vitillo, Francesco; Cachon, Lionel; Reulet, Philippe; Laroche, Emmanuel; Millan, Pierre

2015-01-01

In the framework of CEA R&D program to develop the Advanced Sodium Technological Reactor for Industrial Demonstration (ASTRID), the present work aims to demonstrate the industrial interest of an innovative compact heat exchanger technology. In fact, one of the main innovations of the ASTRID reactor could be the use of a Brayton Gas-power conversion system, in order to avoid the energetic sodium–water interaction that might occur if a traditional Rankine cycle was used. The present work aims to study the thermal-hydraulic performance of the innovative compact heat exchanger concept. Hence, thanks to a trustful numerical model, friction factor and heat transfer correlations are obtained. Then, a global compactness comparison strategy is proposed, taking into account design constraints. Finally, it is demonstrated that the innovative heat exchanger concept is more compact then other already industrial technologies of interest, showing that is can be considered to warrant serious consideration for future ASTRID design as well as for any industrial application that needs very compact heat exchanger technologies. - Highlights: • We propose a new innovative compact heat exchanger technology. • We provide thermal-hydraulic correlations for designers. • We provide a comparison strategy with existing technologies. • We demonstrate the industrial interest of the innovative concept

Development of innovative technological base for large-scale nuclear power

Energy Technology Data Exchange (ETDEWEB)

Adamov, E.O.; Dedul, A.V.; Orlov, V.V.; Rachkov, V.I.; Slesarev, I.S. [ITC ' ' PRORYV' ' Project, Moscow (Russian Federation)

2017-04-15

The problems of the Nuclear Power (NP) further development as well as the ways of their resolution on the basis of innovative fast reactor concepts and the Closed Equilibrium Fuel Cycle (CEFC) are analyzed. The new paradigm of NP and the corresponding NP super task are declared. The corresponding super task could be considered a transition to the vital risk free nuclear power through the guaranteed elimination/suppression of all their vital risks and threats (or their transformation to the category of some ordinary risks and threats) on the base of ''natural safety principle''. The project of Rosatom State Corporation (named ''PRORYV'') is launched within the Federal Target Program ''Nuclear power technologies of new generation for 2010 to 2015 and in perspective till 2020''. It has been planned just for these goals achievement. Super-task solution is quite ''on teeth'' to PRORYV project which is initially focused on the ''natural safety'' realization. This project is aimed, in particular, at construction of the demonstration lead cooled reactor BREST-300-OD and the enterprise for equilibrium fuel cycle closing.

Safety and Efficacy of Dextran-Rosmarinic Acid Conjugates as Innovative Polymeric Antioxidants in Skin Whitening: What Is the Evidence?

Directory of Open Access Journals (Sweden)

Ortensia I. Parisi

2017-08-01

Full Text Available Background: Melanins are high molecular weight pigments responsible for the mammalian skin and hair colour and play a key role in skin protection from UV radiation; however, their overproduction and excessive accumulation lead to pigmentation problems including melasma, freckles, uneven colouring, and age spots. Therefore, the modulation of melanin synthesis represents a critical issue in medicine and cosmetology. In the present study, an innovative polymeric antioxidant to be used as skin whitening agent is developed by the conjugation of dextran with rosmarinic acid. Methods: Dextran-rosmarinic acid conjugates (DEX-RA were synthesized in a one-pot method starting from Origanum vulgare aqueous leaf extract and dextran. The total polyphenol content and the antioxidant activity were assessed by Folin-Ciocalteau assay and 2,2-diphenyl-1-picrylhydrazyl radical (DPPH and bleaching tests, respectively. The efficacy of DEX-RA was evaluated by inhibition of tyrosinase activity, in vitro diffusion and stability studies and in vivo studies. The biocompatibility of the conjugates was investigated by 3-[4,5-Dimethylthiaoly]-2,5-diphenyltetrazoliumbromide (MTT and EPISKIN™ model. Results: Efficacy and safety studies confirmed the antioxidant and tyrosinase inhibitory activities and the biocompatibility of the synthesized conjugates. Conclusion: The polymeric conjugates, comparing to the free antioxidant, show a long-lasting efficacy combined to an enhanced stability resulting in an improved performance of the cosmetic formulations prepared using this innovative whitening agent as a bioactive ingredient.

Key Mechanisms for Employee-Driven Innovation in Governmental Client Organisations

DEFF Research Database (Denmark)

Sørensen, Henrik; Wandahl, Søren; Ussing, Lene Faber

2018-01-01

the mechanisms of organisational trust, innovation safety, organisational practices, cultural settings and the recognition and rewards structure to motivate employees. The decision-making procedures should be transparent especially to the idea-owner and the employees involved, and the implementation and putting...

Quality and innovation between tipical products exploiting and new food design

Directory of Open Access Journals (Sweden)

Marco Dalla Rosa

2011-02-01

Full Text Available Scientific approach is often ignored in the production of typical and marginal foods which come from empiric trial and procedures consolidated along the time. At the beginning of the twentieth century food science starter influencing food production and processing by a multidisciplinary approach aiming at the safety guarantee of industrial products intended for large scale consumption. In the last decades researchers started taking into account traditional and marginal food products by an accurate scientific approach aiming to their exploitation and to define their quality and safety parameters. Scientific approach to marginal products can be schematically divided in two levels: analytical and technological/engineering. In general, the analytical approach focuses on chemical aspects, physical properties, aromatic and sensorial characteristics and on the microbiological and genetic characterizations. 

Quality and innovation between tipical products exploiting and new food design

Directory of Open Access Journals (Sweden)

Dino Mastrocola

2008-04-01

Full Text Available Scientific approach is often ignored in the production of typical and marginal foods which come from empiric trial and procedures consolidated along the time. At the beginning of the twentieth century food science starter influencing food production and processing by a multidisciplinary approach aiming at the safety guarantee of industrial products intended for large scale consumption. In the last decades researchers started taking into account traditional and marginal food products by an accurate scientific approach aiming to their exploitation and to define their quality and safety parameters. Scientific approach to marginal products can be schematically divided in two levels: analytical and technological/engineering. In general, the analytical approach focuses on chemical aspects, physical properties, aromatic and sensorial characteristics and on the microbiological and genetic characterizations. The technological/engineering approach must be considered a san integration of the knowledge both about the finished product and the production process and consists of: the definition of markers connecting quality to first matter; the study of seasonal and annual variability; the search for correlations among process/environment/quality on molecular basis; the pointing out of markers to set traceability systems up; the definition of key-factors to characterize the land according to its food production as an impulse for the development of other sectors such as tourism. Finally, innovation in the sector of traditional and marginal production should concern the definition of chemicalphysical and sensorial characteristics, the rationalization of traditional processes and the introduction of new compatible technology phases, the introduction of new packaging forms to elongate the shelf life and to enlarge distribution areas guaranteeing, at the same time, the maintenance of product peculiarity and typicality. New food design is one of the most

Responsible, Inclusive Innovation and the Nano-Divide.

Science.gov (United States)

Schroeder, Doris; Dalton-Brown, Sally; Schrempf, Benjamin; Kaplan, David

Policy makers from around the world are trying to emulate successful innovation systems in order to support economic growth. At the same time, innovation governance systems are being put in place to ensure a better integration of stakeholder views into the research and development process. In Europe, one of the most prominent and newly emerging governance frameworks is called Responsible Research and Innovation (RRI). This article aims to substantiate the following points: (1) The concept of RRI and the concept of justice can be used to derive similar ethical positions on the nano-divide. (2) Given the ambitious policy aims of RRI (e.g. economic competitiveness enhancer), the concept may be better suited to push for ethical outcomes on access to nanotechnology and its products rather than debates based on justice issues alone. It may thus serve as a mediator concept between those who push solely for competitiveness considerations and those who push solely for justice considerations in nano-technology debates. (3) The descriptive, non-normative Systems of Innovation approaches (see below) should be linked into RRI debates to provide more evidence on whether the approach advocated to achieve responsible and ethical governance of research and innovation (R&I) can indeed deliver on competitiveness (in nano-technology and other fields).

TRANSITION TO INNOVATIVE ECONOMICS ON THE BASIS OF «ROAD CARD»: EXAMINATION, EVALUATION, PROSPECTS

Directory of Open Access Journals (Sweden)

A. O. Baklanov

2011-01-01

Full Text Available The innovative economics model is examined in its interaction with the environment that includes such components as science, society, state, education, business and market as well as safety and court systems. Three main RF economics innovative and active development strategies are suggested and discussed: «resource-export», «resource-science» and «resource-innovation» strategies. Preference is given to the resourceinnovation strategy characteristic with multiple effect resulting from innovations used to update domestic technologies and to restructure the processing and manufacturing industries. An instrument called «Road map» is developed as a set and succession of measures required for Russia to transit to innovative economy.

Restaurant innovativeness: A case study of Vojvodina

Directory of Open Access Journals (Sweden)

Snježana Gagić

2016-11-01

Full Text Available It is of vital importance to continuously work on the improvement and identification of significant factors to ensure and sustain the desired level of quality. The paper aims to analyze the innovativeness level of restaurants in Vojvodina in view of the fact that it keeps their portfolio competitive and thereby achieves a long-term competitive advantage. The innovativeness level was defined on the basis of the instrument designed for measuring innovation in the field of products and services, marketing, processes and socially responsible behavior. In order to determine the level of innovativeness, it was necessary to first determine the percentage of innovativeness based on the number of innovations introduced by the restaurants in all of the four study areas. The results show that a significant number of restaurants pays attention to innovations in order to become more appealing to guests and increase their profitability. On the other hand, more than half of the observed restaurants have a very low or low degree of innovation, which indicates that we still do not pay enough attention to innovations and advancement of their business implementation.

Dynamic capabilities and innovation: a Multiple-Case Study

OpenAIRE

Bravo Ibarra, Edna Rocío; Mundet Hiern, Joan; Suñé Torrents, Albert

2009-01-01

After a detailed survey of the scientific literature, it was found that several characteristics of dynamic capabilities were similar to those of innovation capability. Therefore, with a deeper study of the first ones, it could be possible to design a model aimed to structure innovation capability. Thus, this work presents a conceptual model, where the innovation capability is shown as result of three processes: knowledge absorption and creation capability, knowledge integration and knowledge ...

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

International Nuclear Information System (INIS)

2016-01-01

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of

Using the RE-AIM Framework to Evaluate Disaster Recovery Videos

Directory of Open Access Journals (Sweden)

Sarah Cronin

2018-02-01

Full Text Available Natural disasters both increase and cause financial challenges for survivors. Crisis support reduces negative outcomes such as financial stress, yet survivors are often unaware or unable to access available services. Aiming to innovatively improve access to quality financial education and to support financial recovery post-disaster, a video series was developed with a community advisory board. The RE-AIM framework informed a developmental evaluation measuring the videos’ influence. Results indicated majority of participants have used or intend to use the videos in their disaster work. This indicates the video series may be a helpful tool for disaster responders when providing financial recovery support.

Innovative technologies in business hotels

Directory of Open Access Journals (Sweden)

Анастасия Игоревна Сидоренко

2015-10-01

Full Text Available The article analyzes the state and prospects of development of the hotel industry sector in Ukraine, aimed at a business audience that is constantly increasing; the need for the development and implementation of innovative technologies in a business hotel, because in the long term they will provide improving the service levels, the occupancy rate of the hotel rooms and competitiveness. An expediency of introducing innovative wireless LED lighting system in the rooms of business hotels is proved

Translating Health Services Research into Practice in the Safety Net.

Science.gov (United States)

Moore, Susan L; Fischer, Ilana; Havranek, Edward P

2016-02-01

To summarize research relating to health services research translation in the safety net through analysis of the literature and case study of a safety net system. Literature review and key informant interviews at an integrated safety net hospital. This paper describes the results of a comprehensive literature review of translational science literature as applied to health care paired with qualitative analysis of five key informant interviews conducted with senior-level management at Denver Health and Hospital Authority. Results from the literature suggest that implementing innovation may be more difficult in the safety net due to multiple factors, including financial and organizational constraints. Results from key informant interviews confirmed the reality of financial barriers to innovation implementation but also implied that factors, including institutional respect for data, organizational attitudes, and leadership support, could compensate for disadvantages. Translating research into practice is of critical importance to safety net providers, which are under increased pressure to improve patient care and satisfaction. Results suggest that translational research done in the safety net can better illuminate the special challenges of this setting; more such research is needed. © Health Research and Educational Trust.

Innovation and productivity: empirical evidence for Brazilian industrial enterprises

Directory of Open Access Journals (Sweden)

Luciana Carvalho

Full Text Available Abstract The aim of this paper is to carry out an empirical investigation into the relationship between innovation and the productive performance of Brazilian businesses measured by Work Productivity and Total Factor Productivity. Data taken from the Research of Innovation and estimated cross section models and panel data was used. The results suggest that innovation produces an incipient impact on competition in the national industry, reflected in the small magnitude of coefficients associated with the diverse indicators of innovation.

Innovation in Small and Medium Enterprises in the Czech Republic

Directory of Open Access Journals (Sweden)

Petra Koudelková

2014-10-01

Full Text Available The success of small and medium enterprises (SMEs is crucial for the development of the Czech economy. Czech SMEs contribute to innovation and economic growth; they provide employment opportunities and stimulate economic growth. The aim of this research is to determine the key elements of growth and innovation in Czech SMEs. A questionnaire survey of innovation in SMEs in the Czech Republic was used; the research was held in the second quarter of 2013. The research results show that innovation has a positive impact on the growth of Czech SMEs and hence it should become a top priority for the Government strategies and policies that aim to promote economic growth and business development in the Czech Republic.

The impact of masculinity on safety oversights, safety priority and safety violations in two male-dominated occupations

DEFF Research Database (Denmark)

Nielsen, Kent; Hansen, Claus D.; Bloksgaard, Lotte

2015-01-01

Background Although men have a higher risk of occupational injuries than women the role of masculinity for organizational safety outcomes has only rarely been the object of research. Aim The current study investigated the association between masculinity and safety oversights, safety priority......-related context factors (safety leadership, commitment of the safety representative, and safety involvement) and three safety-related outcome factors (safety violations, safety oversights and safety priority) were administered twice 12 months apart to Danish ambulance workers (n = 1157) and slaughterhouse workers...

E-learning for textile enterprises innovation improvement

Science.gov (United States)

Blaga, M.; Harpa, R.; Radulescu, I. R.; Stepjanovic, Z.

2017-10-01

The Erasmus Plus project- TEXMatrix: “Matrix of knowledge for innovation and competitiveness in textile enterprises”, financed through the Erasmus+ Programme, Strategic partnerships- KA2 for Vocational Education and Training, aims at spreading the creative and innovative organizational culture inside textile enterprises by transferring and implementing methodologies, tools and concepts for improved training. Five European partners form the project consortium: INCDTP - Bucharest, Romania (coordinator), TecMinho - Portugal, Centrocot - Italy, University Maribor, Slovenia, and “Gheorghe Asachi” Technical University of Iasi, Romania. These will help the textile enterprises involved in the project, to learn how to apply creative thinking in their organizations and how to develop the capacity for innovation and change. The project aims to bridge the gap between textile enterprises need for qualified personnel and the young workforce. It develops an innovative knowledge matrix for the tangible and intangible assets of an enterprise and a benchmarking study, based on which a dedicated software tool will be created. This software tool will aid the decision-making enterprise staff (managers, HR specialists, professionals) as well as the trainees (young employees, students, and scholars) to cope with the new challenges of innovation and competitiveness for the textile field. The purpose of this paper is to present the main objectives and achievements of the project, according to its declared goals, with the focus on the presentation of the knowledge matrix of innovation, which is a powerful instrument for the quantification of the intangible assets of textile enterprises.

The concept of the innovative power reactor

Directory of Open Access Journals (Sweden)

Sang Won Lee

2017-10-01

Full Text Available The Fukushima accident reveals the vulnerability of existing active nuclear power plant (NPP design against prolonged loss of external electricity events. The passive safety system is considered an attractive alternative to cope with this kind of disaster. Also, the passive safety system enhances both the safety and the economics of NPPs. The adoption of a passive safety system reduces the number of active components and can minimize the construction cost of NPPs. In this paper, reflecting on the experience during the development of the APR+ design in Korea, we propose the concept of an innovative Power Reactor (iPower, which is a kind of passive NPP, to enhance safety in a revolutionary manner. The ultimate goal of iPower is to confirm the feasibility of practically eliminating radioactive material release to the environment in all accident conditions. The representative safety grade passive system includes a passive emergency core cooling system, a passive containment cooling system, and a passive auxiliary feedwater system. Preliminary analysis results show that these concepts are feasible with respect to preventing and/or mitigating the consequences of design base accidents and severe accidents.

Augmented reality for improved safety

CERN Multimedia

Stefania Pandolfi

2016-01-01

Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

Innovations in financing environmental and social sustainability: Literature overview

NARCIS (Netherlands)

Kerste, M.; Weda, J.; Rosenboom, N.

2010-01-01

Innovative finance instruments can help increase funding of investments aimed at environmental and social sustainability. At the request of Duisenberg school of finance, this report highlights leading literature and empirical findings on ‘innovations in financing environmental and social

Innovation Initiatives in Large Software Companies

DEFF Research Database (Denmark)

Edison, Henry; Wang, Xiaofeng; Jabangwe, Ronald

2018-01-01

empirical studies on innovation initiative in the context of large software companies. A total of 7 studies are conducted in the context of large software companies, which reported 5 types of initiatives: intrapreneurship, bootlegging, internal venture, spin-off and crowdsourcing. Our study offers three......Context: To keep the competitive advantage and adapt to changes in the market and technology, companies need to innovate in an organised, purposeful and systematic manner. However, due to their size and complexity, large companies tend to focus on the structure in maintaining their business, which...... can potentially lower their agility to innovate. Objective:The aims of this study are to provide an overview of the current research on innovation initiatives and to identify the challenges of implementing those initiatives in the context of large software companies. Method: The investigation...

Innovating for quality and value: Utilizing national quality improvement programs to identify opportunities for responsible surgical innovation.

Science.gov (United States)

Woo, Russell K; Skarsgard, Erik D

2015-06-01

Innovation in surgical techniques, technology, and care processes are essential for improving the care and outcomes of surgical patients, including children. The time and cost associated with surgical innovation can be significant, and unless it leads to improvements in outcome at equivalent or lower costs, it adds little or no value from the perspective of the patients, and decreases the overall resources available to our already financially constrained healthcare system. The emergence of a safety and quality mandate in surgery, and the development of the American College of Surgeons National Surgical Quality Improvement Program (NSQIP) allow needs-based surgical care innovation which leads to value-based improvement in care. In addition to general and procedure-specific clinical outcomes, surgeons should consider the measurement of quality from the patients' perspective. To this end, the integration of validated Patient Reported Outcome Measures (PROMs) into actionable, benchmarked institutional outcomes reporting has the potential to facilitate quality improvement in process, treatment and technology that optimizes value for our patients and health system. Copyright © 2015 Elsevier Inc. All rights reserved.

The Role of Organizational Learning in Transformational Leadership and Organizational Innovation

Science.gov (United States)

Hsiao, Hsi-Chi; Chang, Jen-Chia

2011-01-01

Leadership is an important factor affecting organizational innovation. Many studies show that transformational leadership has positive and significant influence on organizational innovation. Based on a literature review and previous work, this study aims to investigate the influence of transformational leadership on organizational innovation and…

Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

Institute of Scientific and Technical Information of China (English)

Yinxing Hong; Yao Lu; Jianghuai Zheng

2017-01-01

In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

PRISM: An innovative liquid metal fast breeder reactor

International Nuclear Information System (INIS)

Kruger, G.B.; Boardman, C.E.; Olich, E.E.; Switick, D.M.

1986-01-01

This paper describes an innovative sodium-cooled reactor concept employing small certified reactor modules coupled with a standardized steam generator system. The total plant employs nine PRISM reactors (power reactor inherently safe module) in three 415 MWe power blocks. The PRISM design concept utilizes inherent safety characteristics and modularity to improve licensability, reduce owner's risk, and reduce costs. The relatively small size of each reactor module facilitates the use of passive, inherent self-shutdown and shutdown heat removal features, which permit design simplification and reduction of safety-related systems. It is proposed that a single PRISM module be used in a full-scale integrated reactor safety test. Results from the test would be used to obtain NRC certification of the standard design

AMNT 2014. Key Topic: Reactor operation, safety - report. Pt. 1

Energy Technology Data Exchange (ETDEWEB)

Schaffrath, Andreas [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Garching (Germany). Forschungszentrum

2014-10-15

Summary report on one session of the Annual Conference on Nuclear Technology held in Frankfurt, 6 to 8 May 2014: - Safety of Nuclear Installations - Methods, Analysis, Results: Backfittings for the Improvement of Safety and Efficiency. The other Sessions of the Key Topics 'Reactor Operation, Safety', 'Competence, Innovation, Regulation' and 'Fuel, Decommissioning and Disposal' will be covered in further issues of atw.

Wheat Industry: Which Factors Influence Innovation?

Directory of Open Access Journals (Sweden)

Vitor Francisco Dalla Corte

2015-10-01

Full Text Available A change in the profile of food consumption is occurring because of the new context of demographic growth, the increase of income in developing economies, and urbanization. In Brazil, consumption patterns have trended from fresh to processed food and internal and external growth in demand has led to opportunities that require new and higher levels of technological innovation and associated managerial skill. The aim of this study was to evaluate the role of innovation on a key Brazilian food industry: wheat product markets. Results showed that while most firms did not innovate in the past year, new investments in R&D were important for innovation to occur compared to other factors such as the size of the company, the integration in supply chain, and the age of the company. These results demonstrate that innovation is not a random or unpredictable process, but a complex and diverse process that may be specific to each industry.

From generic to biosimilar drugs: why take an innovative pace?

Directory of Open Access Journals (Sweden)

Fereshteh Barei

2012-12-01

Full Text Available BACKGROUND: The transition of the generic/biotechnology industry to innovation by investing in innovative R&D will enhance business expertise in biopharmaceutical development and manufacturing. The major impact of this evolution is on patient access to treatment and savings for the health care systems. OBJECTIVES: The aim of this paper is to investigate the innovative aspect of biosimilar and biobetter products, manufactured by some big generic companies. We will also try to explore the innovative business strategy, implementing this high risk product differentiation policy. METHODS: This qualitative research is conducted by a series of interviews with CEOs, physicians, and academics in different countries. The qualitative data obtained were analyzed by Nvivo9.2 software. A literature review has also contributed to our key findings. RESULTS: The results show that switching into biosimilars/biobetters is an innovative strategic choice, approved by some big generic pharmaceutical companies. The biosimilar/biobetter products can be considered innovative because of their value added quality. CONCLUSION: Expanding the product portfolio to biosimilars/biobetter can be considered as a long run strategy in the innovative business plans aiming to ensure the market access. Patients and their access to better treatments are major components of these innovative business models.

Integrating Safety with Science,Technology and Innovation at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Rich, Bethany M [Los Alamos National Laboratory

2012-04-02

The mission of Los Alamos National Laboratory (LANL) is to develop and apply science, technology and engineering solutions to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve emerging national security challenges. The most important responsibility is to direct and conduct efforts to meet the mission with an emphasis on safety, security, and quality. In this article, LANL Environmental, Safety, and Health (ESH) trainers discuss how their application and use of a kinetic learning module (learn by doing) with a unique fall arrest system is helping to address one the most common industrial safety challenges: slips and falls. A unique integration of Human Performance Improvement (HPI), Behavior Based Safety (BBS) and elements of the Voluntary Protection Program (VPP) combined with an interactive simulator experience is being used to address slip and fall events at Los Alamos.

Case Study of R-1234yf Refrigerant: Implications for the Framework for Responsible Innovation.

Science.gov (United States)

Wodzisz, Rafał

2015-12-01

Safety and care for the natural environment are two of the most important values that drive scientific enterprise in twentieth century. Researchers and innovators often develop new technologies aimed at pollution reduction, and therefore satisfy the strive for fulfilment of these values. This work is often incentivized by policy makers. According to EU directive 2006/40/EC on mobile air conditioning since 2013 all newly approved vehicles have to be filled with refrigerant with low global warming potential (GWP). Extensive and expensive research financed by leading car manufacturers led to invention of R-1234yf refrigerant with GWP marketing. Secondly, I examine framework for responsible innovation. In greater detail I discuss the notions of care for future generations and collective responsibility. Thirdly, I apply the offered framework to the case study at hand. Finally, I draw some conclusions which go in two directions: one is to make some suggestions for improving the framework of RI, and the second is to identify missed opportunities for developing truly responsible refrigerant.

U.S. ALMR safety approach and licensing status

International Nuclear Information System (INIS)

Herczeg, J.W.; Hardy, R.W.; Gyorey, G.L.

1992-01-01

The Advanced Liquid Metal Cooled Reactor (ALMR) in the United States is based on the Power Reactor Innovative Small Module (PRISM) concept originated by the General Electric Company (GE). This concept features a compact modular system suitable for factory fabrication, and a high degree of passive and natural safety characteristics. The safety approach emphasizes accident prevention, backed up by accident mitigation. First-round safety evaluations by U.S. regulators have found that the design provides passive, natural, and other desirable features enhancing the safety of the power plant. A Preapplication Safety Evaluation Report (PSER) from the U.S. Nuclear Regulatory Commission (NRC) is anticipated in early 1993. (author)

On the future of safety in the manufacturing industry

OpenAIRE

Reniers, G.

2017-01-01

Abstract: This paper argues that a new paradigm is needed in the manufacturing industry to further substantially advance safety as part of the industry 4.0 concept. The different domains that need to be focused upon are Cluster-thinking and cooperation, High transparency and efficient inspections, Education and training, Security integration, and Safety innovation. Since society has fundamentally changed over the last two decades, revolutionizing safety via these domains is truly needed in th...

Electronic health record innovations: Helping physicians - One less click at a time.

Science.gov (United States)

Guo, Uta; Chen, Lu; Mehta, Parag H

2017-09-01

Physician burnout is becoming an epidemic, due to the pressures of being productive, an imperfect electronic health record (EHR) system, and limited face-to-face time with patients. Poor usability in EHR-user interface can force users to go through more steps (i.e. more clicks on the computer) in accomplishing a task. This increased 'click burden' is a source of frustration for physicians. In the light of increased click burden and time due to meaningful use requirements, there is a need to improve the physician's experience by creating innovations in EHR. This case study describes an attempt by physicians at NewYork-Presbyterian Brooklyn Methodist Hospital to enhance the EHR experience with more efficient methods of documentation, chart review, ordering and patient safety. The EHR innovations trialled in this study were: a mobile documentation application; abnormal test results auto-populated into an EHR patient summary; physician alerts to reduce inappropriate test ordering; and a system of safety alerts on a dashboard. These innovations led to decreased click burden and allowed physicians to spend less time on the computer and more time with patients. Physician-driven changes to EHR systems have the potential to streamline virtual workflows and the management of health information and to improve patient safety, reduce physician burnout and increase physician job satisfaction.

Aeromedical solutions for aerospace safety.

Science.gov (United States)

Kapoor, Pawan; Gaur, Deepak

2017-10-01

All facets of activity in the speciality of Aviation Medicine are essentially aimed at enhancing aerospace safety. This paper highlights some innovative changes brought about by Aerospace Medicine in the three major fields of the speciality namely, medical evaluation, aeromedical training and research. Based on lab and field studies, military aircrew are now permitted flying with Modifinil as 'Go' Pill and Zolpidem as 'No-Go' Pill during sustained operations. Several other drugs for disabilities like Hypertension and CAD are now permitted for aviators. Comprehensive revision of policy permitting early return to flying is an on-going process. OPRAM courses for all three streams of aircrew in IAF have contributed to reduce aircraft accident rates. Human Engineering Consultancy and expert advice is provided by specialists at IAM as well as those in the field. In future, the country needs to provide better post-service opportunities to aerospace medicine specialists. This, in turn, will attract bright young minds to the specialty. The ISRO Humanin-Space programme will be an exciting challenge for all in this unique field. Aerospace Medicine continues to provide aerospace safety solutions to the IAF and the aviation industry. The nation needs to continue to utilize and support this specialty.

Innovation by Defining Failures under Environmental and Competitive Pressures

DEFF Research Database (Denmark)

Fujiwara, Masatoshi

accomplished an innovation and increased their market share during the late 1980s. Kao introduced their new detergent Attack through a biotechnological innovation and dramatically changed the competitive structure to their advantage. The innovations introduced were of two kinds 1) fermentation engineering......This paper aims to describe how a commercially successful innovation occurs with the altering of the existing competitive structure in a market under environmental and competitive pressures. I study the history of the laundry detergent market in Japan and elucidate the manner in which Kao...

Competitive Advantage Achievement through Innovation and Knowledge

Directory of Open Access Journals (Sweden)

Urbancova Hana

2013-03-01

Full Text Available In today’s highly competitive environment the goal of each organisation is to defeat competition and win new customers. Individuals who are holders of knowledge represent a tool for the generation of innovations. Thanks to their personal creativity, their knowledge, skills and abilities it is possible to generate new innovative ideas that will help organisations to achieve a competitiveadvantage. The aim of the article is to present the findings of a survey targeted at innovations and to identify knowledge as an important element in the process of innovations. Primary data were obtained through a questionnaire survey carried out in organisations in the Czech Republic and evaluated using the tools of descriptive statistics and also the methods of comparison, induction, deduction and synthesis were applied. One of the conclusions of the article is that organisations find it important to innovate and support an innovative culture. Knowledge too is very significant in the innovation process since it represents not only important input, but also output of the transformation process.

Proposal of Innovative Approaches of Relationship Marketing in Business

Directory of Open Access Journals (Sweden)

Viliam Lendel

2015-03-01

Full Text Available The aim of this paper is to propose innovative approaches to relationship marketing that affect the process of building relationships with customers, based on a detailed analysis of the literary sources and the research. This proposal is supported by the information technology e-CRM and social CRM. The paper contains a detailed description of the procedure for successfully implementing innovative approaches to relationship marketing in business. This should serve mainly to marketing managers as a valuable tool in their use of innovative approaches to relationship marketing, especially in the process of obtaining innovative ideas from customers, in order to identify their needs and requirements. Furthermore, the paper contains the main results of our research aimed at identifying the extent of utilization of innovative approaches to relationship marketing in Slovak businesses. A total of 207 respondents were involved in the research (medium and large businesses and following methods were used: comparative method of qualitative evaluation method, the method of structured and structured interview method, observation, document analysis method (method of content analysis and questionnaire method.

Practice and innovation on safety management of Haiyang Nuclear Power Project

International Nuclear Information System (INIS)

Wei Guohu

2011-01-01

From the perspective of owner, this article has introduced the safety management model and practice of Haiyang Nuclear Power Project, one of AP1000 Self-reliance Program supporting projects of China. And the article has summarized characteristics of the safety management of Haiyang Project for reference and communication with nuclear or other projects. (author)

Changing innovation into a registered product: From concept to regulatory approval.

Science.gov (United States)

Rhodes, Linda

2018-05-01

Innovation in animal health pharmaceuticals is important to address unmet and underserved medical needs, and often comes from products initially developed for human medicine. The purpose of the review is to help readers understand how breakthroughs from human biotechnology may be developed for use in veterinary medicine, while understanding the key drivers to success, the difficulties of regulatory approval, and the realistic risks and rewards of developing applications for animals. The types of human drugs which may be useful for veterinary applications are reviewed, including examples. The regulatory path is discussed, with a review of the various oversight agencies, and the categories of data required to be submitted, including safety, efficacy, manufacturing, environmental impact and human food safety. In conclusion, the cost, development time, and barriers to innovation in veterinary medical pharmaceuticals are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Innovative design method of automobile profile based on Fourier descriptor

Science.gov (United States)

Gao, Shuyong; Fu, Chaoxing; Xia, Fan; Shen, Wei

2017-10-01

Aiming at the innovation of the contours of automobile side, this paper presents an innovative design method of vehicle side profile based on Fourier descriptor. The design flow of this design method is: pre-processing, coordinate extraction, standardization, discrete Fourier transform, simplified Fourier descriptor, exchange descriptor innovation, inverse Fourier transform to get the outline of innovative design. Innovative concepts of the innovative methods of gene exchange among species and the innovative methods of gene exchange among different species are presented, and the contours of the innovative design are obtained separately. A three-dimensional model of a car is obtained by referring to the profile curve which is obtained by exchanging xenogeneic genes. The feasibility of the method proposed in this paper is verified by various aspects.

Regional technical innovation suitability and economic growth in China

NARCIS (Netherlands)

Zhou, Qing; Zhu, Dan; Brouwers-Ren, Liqin

2012-01-01

This paper aims to use quantitative method to analyse the suitability of regional technical innovation and further compare its influence to regional economic growth in China. Based on literature review, the authors develop an evaluation index system containing four aspects (namely, innovators,

Disruptive innovation for social change.

Science.gov (United States)

Christensen, Clayton M; Baumann, Heiner; Ruggles, Rudy; Sadtler, Thomas M

2006-12-01

Countries, organizations, and individuals around the globe spend aggressively to solve social problems, but these efforts often fail to deliver. Misdirected investment is the primary reason for that failure. Most of the money earmarked for social initiatives goes to organizations that are structured to support specific groups of recipients, often with sophisticated solutions. Such organizations rarely reach the broader populations that could be served by simpler alternatives. There is, however, an effective way to get to those underserved populations. The authors call it "catalytic innovation." Based on Clayton Christensen's disruptive-innovation model, catalytic innovations challenge organizational incumbents by offering simpler, good-enough solutions aimed at underserved groups. Unlike disruptive innovations, though, catalytic innovations are focused on creating social change. Catalytic innovators are defined by five distinct qualities. First, they create social change through scaling and replication. Second, they meet a need that is either overserved (that is, the existing solution is more complex than necessary for many people) or not served at all. Third, the products and services they offer are simpler and cheaper than alternatives, but recipients view them as good enough. Fourth, they bring in resources in ways that initially seem unattractive to incumbents. And fifth, they are often ignored, put down, or even encouraged by existing organizations, which don't see the catalytic innovators' solutions as viable. As the authors show through examples in health care, education, and economic development, both nonprofit and for-profit groups are finding ways to create catalytic innovation that drives social change.

Where are All the Female Innovators? Nurses as Innovators in a Public Sector Innovation

Directory of Open Access Journals (Sweden)

Johanna Nählinder

2010-03-01

Full Text Available The field of innovation does not see the innovator and is therefore gender-blind. Still, there is an implicit understanding of who is innovative, and this understanding includes gender and profession of the innovator. The female nurse is not seen as innovative and few innovation policies target her. The lack of innovativeness is due to many factors and two of these are tested empirically in this article: that women work in professions which are not associated with innovation and that women lack confidence to carry out innovative work. The empirical investigation presents evidence in line with both hypothesis and also notes that men and women ends their innovative efforts for different reasons. Therefore, innovation policy targeting these groups mobilises otherwise dormant potential innovators.

Activating the adoption of innovation : lessons from a passive house network

NARCIS (Netherlands)

Mlecnik, E.

2016-01-01

Purpose – The purpose of this paper is to explore innovation adoption theory and to define a model to investigate operational activities and communication in innovation networks that can stimulate both supply and demand. It also aims to exemplify this model with the activities of an innovation

Innovation af innovation

DEFF Research Database (Denmark)

Harste, Gorm

2009-01-01

, at innovation af innovationen forsøges gennemført på en måde, hvor tiden kræves at forholde sig til sin egen tidslighed i form af fremtid, nutid, fortid og ikke mindst i form af samtidighed. I tiden skal vi iagttage, hvordan vi iagttager tiden. Vi dobbelt-koder tiden på samme måde, som forskning forsker i...... organisationssystemerne. De to typer systemer kan noget helt bestemt med fænomenet tid. De kan synkronisere. Analyseres organisationssystemer ser vi, imidlertid at innovation kræver ro. Stærkt innovative systemer er militærsystemet og kunstsystemet, der også inddrages, og hvor vi ser paradokset mellem innovation og...... involution. Tid er med et medium og ikke et lufttomt rum. Tid er end ikke en gasart, men udgør et solidt fluidum, som samfundet bader i og flyder i, konstant i bevægelse. Reformer forudsætter former, og innovation forudsætter involution. Kun sådan muliggøres evolution....

Do gender and personality traits (BFI-10) influence self-perceived innovativeness?

DEFF Research Database (Denmark)

Sudzina, Frantisek

2016-01-01

Innovativeness is a useful trait in many walks of life. The aim of this paper is to investigate if gender and personality traits influence rating of self-perceived innovativeness. There are two versions of the dependent variable used - innovativeness in the eyes of others, and innovativeness in one......'s own opinion. Big Five Inventory-10 is used to measure personality traits. Findings are that conscientiousness influences self-perceived innovativeness in the eyes of others, and openness to experience influences self-perceived innovativeness in one's own opinion. Conscientiousness also influences...

Implementation of Safe-by-Design for Nanomaterial Development and Safe Innovation: Why We Need a Comprehensive Approach.

Science.gov (United States)

Kraegeloh, Annette; Suarez-Merino, Blanca; Sluijters, Teun; Micheletti, Christian

2018-04-14

Manufactured nanomaterials (MNMs) are regarded as key components of innovations in various fields with high potential impact (e.g., energy generation and storage, electronics, photonics, diagnostics, theranostics, or drug delivery agents). Widespread use of MNMs raises concerns about their safety for humans and the environment, possibly limiting the impact of the nanotechnology-based innovation. The development of safe MNMs and nanoproducts has to result in a safe as well as functional material or product. Its safe use, and disposal at the end of its life cycle must be taken into account too. However, not all MNMs are similarly useful for all applications, some might bear a higher hazard potential than others, and use scenarios could lead to different exposure probabilities. To improve both safety and efficacy of nanotechnology, we think that a new proactive approach is necessary, based on pre-regulatory safety assessment and dialogue between stakeholders. On the basis of the work carried out in different European Union (EU) initiatives, developing and integrating MNMs Safe-by-Design and Trusted Environments (NANoREG, ProSafe, and NanoReg2), we present our point of view here. This concept, when fully developed, will allow for cost effective industrial innovation, and an exchange of key information between regulators and innovators. Regulators are thus informed about incoming innovations in good time, supporting a proactive regulatory action. The final goal is to contribute to the nanotechnology governance, having faster, cheaper, effective, and safer nano-products on the market.

Are Massive Open Online Courses (MOOCs) Pedagogically Innovative?

Science.gov (United States)

Armellini, Alejandro; Padilla Rodriguez, Brenda Cecilia

2016-01-01

While claims about pedagogic innovation in Massive Open Online Courses (MOOCs) are common, most reports provide no evidence to justify those claims. This paper reports on a survey aimed at exploring how different stakeholders describe MOOCs, focusing on whether they would consider them pedagogically innovative, and if so, why. Respondents (n =…

Initiating Service Encounter-based Innovation by Word-of-Business

DEFF Research Database (Denmark)

Mattsson, Jan

2015-01-01

Purpose – This paper aims to set up a natural experiment as action research and to develop a framework of cognitive distance of informants to improve the initiation of service encounter-based innovation. Design/methodology/approach – Natural experiment as action research in one Scandinavian case...... transcriptions of interviews and transcriptions. Research limitations/implications – Only one Scandinavian company and a limited number of informants were activated. Also, the time period only included the initiation phase of service encounter-based innovation. Practical implications – Three different strategies...... in an emerging innovation field, open/user-driven innovation. Theory from business marketing, service encounter and innovation is also used....

The Game of Innovation. Is Gamification a New Trendsetter?

OpenAIRE

Procopie, Roxana; Bumbac, Robert; Giușcă, Smaranda; Vasilcovschi, Andra

2015-01-01

With the evolution of information technology and that of the Internet, society has changed and so did the needs of Generation Y that aims to be more involved in decision making processes and have an overall open and positive approach to innovation. This article aims to analyse the contribution of adopting techniques and methods specific to gamification to the results of the innovation process from Generation Y’s perspective. The chosen research method is that of quantitative research, resorti...

SOCIAL MEDIA PLATFORMS AND ROMANIAN SMEs. AN INNOVATION PERSPECTIVE.

Directory of Open Access Journals (Sweden)

ARIANA TAL

2017-06-01

Full Text Available Innovation can take a lot of forms in firms. Large companies are more willing to innovate due to a higher potential than SMEs. In social media, SMEs have equal chances to make a difference. In this paper I aim to present a social media overview, emphasizing the benefits and characteristics of these platforms and the way they can represent a huge innovation for SMEs and in the second part to discuss the case of Romania in relation with social media from the perspective of innovation.

Innovation as a transversal Axis in Organizational Business Models

Directory of Open Access Journals (Sweden)

Luis Fernando Landazury Villalba

2017-02-01

Full Text Available In the field of business and administration, innovation has turned to be a differentiating factor in the business models of organizations; for this reason, this article aims at showing a theoretical reflection about innovation in various business models, exploring the relevance of the concepts of management and creation of added value. It was noticed a pertinent concept for innovation and business models from an interpretation perspective, as well as ideas and views which clearly show that these forms of innovation and business models really generate added value.

The road safety audit and road safety inspection.

NARCIS (Netherlands)

2007-01-01

A road safety audit (RSA) and a road safety inspection (RSI) are used to test the safety level of the road infrastructure. The RSA tests the design of new roads or the reconstruction of existing roads, whereas the RSI is used for testing existing roads. An RSA, therefore, aims to 'improve' the road

Nuclear power and safety

International Nuclear Information System (INIS)

Chidambaram, R.

1992-01-01

Some aspects of safety of nuclear power with special reference to Indian nuclear power programme are discussed. India must develop technology to protect herself from the adverse economic impact arising out of the restrictive regime which is being created through globalization of safety and environmental issues. Though the studies done and experience gained so far have shown that the PHWR system adopted by India has a number of superior safety features, research work is needed in the field of operation and maintenance of reactors and also in the field of reactor life extension through delaying of ageing effects. Public relations work must be pursued to convince the public at large of the safety of nuclear power programme. The new reactor designs in the second stage of evolution are based on either further improvement of existing well-proven designs or adoptions of more innovative ideas based on physical principles to ensure a higher level of safety. The development of Indian nuclear power programme is characterised by a balanced approach in the matter of assuring safety. Safety enforcement is not just looked upon as a pure administrative matter, but experts with independent minds are also involved in safety related matters. (M.G.B.)

ECO-INNOVATION FOR A SUSTAINABLE FUTURE

Directory of Open Access Journals (Sweden)

RATIU Mariana

2014-05-01

Full Text Available Eco-innovation is any form of innovation resulting in or aiming at significant and demonstrable progress towards the goal of sustainable development, through reducing impacts on the environment, enhancing resilience to environmental pressures, or achieving a more efficient and responsible use of natural resources. States and governments of the world, different institutions and organizations actively involved and aware in public policies, strategies and actions, reaffirm their commitments and reassess actions in order to achieve a truly sustainable development. In the common vision and the resolutions and other documents of the United Nations Conference on Sustainable Development, Rio+20, the words "environment", "innovation", "green economy" appear very often and almost always along the same context, to achieve the objectives of the sustainable development. The objectives of EU's Europe 2020 strategy for smart, sustainable and inclusive growth, are being implemented through a number of Flagship Initiatives addressing the main challenges, like “Innovation for a sustainable Future - The Eco-innovation Action Plan (EcoAP”. Eco-innovation Observatory developed the Eco-Innovation index, the first tool to assess and illustrate eco-innovation performance across the EU Member States. Like in all fields, in textiles and leather field, eco-innovation is present and there are a lot of tools available that measure environmental damage and help manufacturers and brands become more sustainable. Eco-innovation is not just a trendy concept but a reality and a necessity nowadays, a way to achieve a sustainable future for ourselves and future generations.

JSFR design progress related to development of safety design criteria for Generation IV sodium-cooled fast reactors. (1) Overview

International Nuclear Information System (INIS)

Kamide, Hideki; Ando, Masato; Ito, Takaya

2015-01-01

JAEA, JAPC and MFBR have been conducting design study for the Japan Sodium-cooled Fast Reactor (JSFR), which is a design concept aiming at future commercial use as sustainable electric power source. As the result of the design study and R and D activity related the innovative technologies incorporated in the design in the Fast Reactor Cycle Technology Development (FaCT) project up to 2010, basic design concept of JSFR was established and its development process to the commercialization including construction and operation of a demonstration version of JSFR was outlined. JSFR is a looptype next generation sodium-cooled fast reactor (SFR), which is aiming at achieving development targets of Generation IV reactors concerning sustainability, safety and reliability, economics and proliferation resistance and physical protection by introducing the innovative technologies such as shortened high-chromium steel piping. The output power is assumed for the design study as 1,500 MWe for the commercial version and 750 MWe for the demonstration version. In FaCT phase I up to 2010, in order to evaluate feasibility to achieve the development targets, the design study has been conducted on the main components and systems. Since 2011, in order to contribute to the development of safety design criteria (SDC) and safety design guideline (SDG), which include the lessons learned from the TEPCO's Fukushima Dai-ichi nuclear power plants accident, in the frame work of Generation IV International Forum (GIF), the design study is focusing on the design measures against severe external events such as earthquake and tsunami. At the same time, the design study is going into detail and paying much attention to the maintenance and repair to make surer its feasibility. This paper summarizes the design concept of the demonstration version of JSFR in which progress of design work was incorporated for the safety issues on SDC and SDG of a SFR. (author)

Financial Development, Government R&D Subsidies and Green Innovation

Directory of Open Access Journals (Sweden)

Wang Shuying

2017-01-01

Full Text Available In the low carbon economic era, green innovation has become an important basis for an enterprise to obtain and maintain a sustained competitive advantage. In paper, explores the path of green innovation using the panel data of 30 regions in China from 2008 to 2014.It finds that financial development has heterogeneity and different dimensions of financial development have different effects on green innovation of enterprises. That is, financial development structure has a negative impact on enterprise green innovation, and financial development efficiency has a positive impact on green innovation. Howere, the impact between financial development scale and green innovation is not significant. In addition, the study also finds that government R&D subsidies has no significantly effect on green innovation. Finally, this paper aims to provide the government and enterprises some theoretical and practical guidance to carry out policy-making of green innovation.