Nuclear safety. Improvement programme

International Nuclear Information System (INIS)

2000-01-01

In this brochure the improvement programme of nuclear safety of the Mochovce NPP is presented in detail. In 1996, a 'Mochovce NPP Nuclear Safety Improvement Programme' was developed in the frame of unit 1 and 2 completion project. The programme has been compiled as a continuous one, with the aim to reach the highest possible safety level at the time of commissioning and to establish good preconditions for permanent safety improvement in future. Such an approach is in compliance with the world's trends of safety improvement, life-time extension, modernisation and nuclear station power increase. The basic document for development of the 'Programme' is the one titled 'Safety Issues and their Ranking for WWER 440/213 NPP' developed by a group of IAEA experts. The following organisations were selected for solution of the safety measures: EUCOM (Consortium of FRAMATOME, France, and SIEMENS, Germany); SKODA Prague, a.s.; ENERGOPROJEKT Prague, a.s. (EGP); Russian organisations associated in ATOMENERGOEXPORT; VUJE Trnava, a.s

Occupational Safety and Health Act: A Responsibility for Science Teachers

Science.gov (United States)

Science Teacher, 1974

1974-01-01

Presents implications of the Occupational Safety and Health Act for science teachers both as workers and as they encourage, in students, the development of positive safety attitudes for future occupations. (PEB)

The Food Safety Modernization Act: a barrier to trade? Only if the science says so.

Science.gov (United States)

McNeill, Naomi

2012-01-01

The Food Safety Modernization Act improves oversight of America's food safety system. Title III, which regulates imported food, may create extra burdens for importers and therefore act as a barrier to trade. What will be on trial before the World Trade Organization (WTO), however, is not the law's content, but the science supporting it. Under the WTO regime, food safety laws that could restrict the free movement of food commodities must be sufficiently justified by scientific evidence. Member states must engage in risk assessments and regulate food imports in a manner that is "no more restrictive than necessary" to protect against the health risks identified by scientific evidence. This article examines the requirements of the WTO to evaluate the FSMA's legality under WTO rules. It analyzes the case law of the WTO Panel and Appellate Body and compares the FMSA to the EU's General Food Law.

77 FR 25179 - Patient Safety Organizations: Voluntary Relinquishment From Surgical Safety Institute

Science.gov (United States)

2012-04-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... voluntary relinquishment from the Surgical Safety Institute of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the...

The Occupational Safety and Health Act: Implications for School Administration.

Science.gov (United States)

Licht, Kenneth F.

The Occupational Safety and Health Act (1970) concerns private schools but does not directly affect the operations of public schools or colleges. The intent, however, is to have the States develop and administer their own health and safety programs. Administrators should, therefore, initiate a comprehensive, districtwide safety education and…

Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

The FDA Food Safety and Modernization Act and the Exemption for Small Firms

OpenAIRE

Pouliot, Sebastien

2011-01-01

The FDA Food Safety Modernization Act of 2010 is new legislation that mandates, among other things, new food safety standards. The act includes a clause that exempts small firms from new regulatory requirements. This paper investigates the effects of a small firm exemption from more stringent food safety standards. The model compares food safety, total output and the number of market participants for different food safety regulation with and without an exemption for small firms. The numerical...

Organized labor and the origins of the Occupational Safety and Health Act.

Science.gov (United States)

Asher, Robert

2014-11-01

New Solutions is republishing this 1991 article by Robert Asher, which reviews the history of organized labor's efforts in the United States to secure health and safety protections for workers. The 1877 passage of the Massachusetts factory inspection law and the implementation of primitive industrial safety inspection systems in many states paralleled labor action for improved measures to protect workers' health and safety. In the early 1900s labor was focusing on workers' compensation laws. The New Deal expanded the federal government's role in worker protection, supported at least by the Congress of Industrial Organizations (CIO), but challenged by industry and many members of the U.S. Congress. The American Federation of Labor (AFL) and the CIO backed opposing legal and inspection strategies in the late 1940s and through the 1950s. Still, by the late 1960s, several unions were able to help craft the Occupational Safety and Health Act of 1970 and secure new federal protections for U.S. workers.

20 CFR 726.203 - Federal Coal Mine Health and Safety Act endorsement.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Federal Coal Mine Health and Safety Act endorsement. 726.203 Section 726.203 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, AS AMENDED BLACK LUNG BENEFITS; REQUIREMENTS FOR...

Health (Radiation Safety) Act 1983 (Victoria) No. 9889 of 17 May 1983

International Nuclear Information System (INIS)

1983-01-01

This Act amends the Health Act 1958 by adding a new Section entitled ''Radiation Safety''. In addition to establishing guidelines for the registration and licensing of certain radiation apparatus and sealed radioactive sources, this new Section authorises the Governor in Council to make regulations concerning, inter alia, transport and disposal of radioactive substances and public health and safety. The Act also sets up a Radiation Advisory Committee and a Radiographers and Radiation Technologists Registration Board of Victoria and amends the Nuclear Activities (Prohibitions) Act 1983 in respect of certain licensing provisions. (NEA) [fr

76 FR 79192 - Patient Safety Organizations: Voluntary Relinquishment From HSMS Patient Safety Organization

Science.gov (United States)

2011-12-21

... Organizations: Voluntary Relinquishment From HSMS Patient Safety Organization AGENCY: Agency for Healthcare... voluntary relinquishment from the HSMS Patient Safety Organization of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109...

Assessment of Application Example for a Sodium Fire Extinguishing Facility using Safety Control of Dangerous Substances Act

International Nuclear Information System (INIS)

Jung, Minhwan; Jeong, Ji-Young; Kim, Jongman

2014-01-01

Sodium is under regulation of four kinds of laws including the Safety Control of Dangerous Substances Act and it is under categorized as Class 3(pyrophoric material, water-prohibiting substance). To obtain a license for a sodium experiment facility, the codes and regulations must be satisfied in the Safety Control of Dangerous Substance Act. However, there are some parts that need to be discussed in related regulations in the Safety Control of Dangerous Substance Act because there are differences with the actual features of sodium. To apply for an actual sodium facility, it is necessary to give a supplementary explanation regarding the regulations. The objective of this study is to assess the application example of a sodium experiment facility using the above mentioned laws and to propose the necessity of an amendment for conventional laws in regard to fire extinguishing systems and agents. In this work, an application example of a sodium experiment facility using the Safety Control of Dangerous Substances Act, and the necessity of amending the existing laws in regard to fire extinguishing systems including the agent used, was assessed. The safest standard was applied for cases in which the consideration of a sodium fire is not mentioned in conventional regulations. For the construction of the PGSFR (Prototype Gen-IV Sodium-cooled Fast Reactor), the described regulations in this work should be reviewed and improved carefully by the fire safety regulatory body

Researchers' Roles in Patient Safety Improvement.

Science.gov (United States)

Pietikäinen, Elina; Reiman, Teemu; Heikkilä, Jouko; Macchi, Luigi

2016-03-01

In this article, we explore how researchers can contribute to patient safety improvement. We aim to expand the instrumental role researchers have often occupied in relation to patient safety improvement. We reflect on our own improvement model and experiences as patient safety researchers in an ongoing Finnish multi-actor innovation project through self-reflective narration. Our own patient safety improvement model can be described as systemic. Based on the purpose of the innovation project, our improvement model, and the improvement models of the other actors in the project, we have carried out a wide range of activities. Our activities can be summarized in 8 overlapping patient safety improvement roles: modeler, influencer, supplier, producer, ideator, reflector, facilitator, and negotiator. When working side by side with "practice," researchers are offered and engage in several different activities. The way researchers contribute to patient safety improvement and balance between different roles depends on the purpose of the study, as well as on the underlying patient safety improvement models. Different patient safety research paradigms seem to emphasize different improvement roles, and thus, they also face different challenges. Open reflection on the underlying improvement models and roles can help researchers with different backgrounds-as well as other actors involved in patient safety improvement-in structuring their work and collaborating productively.

76 FR 42683 - Establishment of a Team Under the National Construction Safety Team Act

Science.gov (United States)

2011-07-19

...-01] Establishment of a Team Under the National Construction Safety Team Act AGENCY: National..., announces the establishment of a National Construction Safety Team pursuant to the National Construction Safety Team Act. The Team was established to study the effects of the tornado that touched down in Joplin...

OCCUPATIONAL HEALTH AND SAFETY ACT NO.6331 AND TOXICOLOGY

OpenAIRE

AYAN, Burak

2018-01-01

Workers exposureto variety of hazardous chemicals related to the type of work carried out. Regulationsabout chemicals which may be unsafe for workers is regulated at theOccupational Health and Safety Act No.6331.In this review regulatory framework of occupational health and safety forchemicals are assessed in order for chemicals to be used properly andsafely. 

The State Surveillance over Nuclear Safety of Nuclear Facilities Act No. 28/1984

International Nuclear Information System (INIS)

1995-01-01

The Act lays down responsibilities of the Czechoslovak Atomic Energy Commission in the field of state surveillance over nuclear safety of nuclear facilities; determines the responsibilities of nuclear safety inspectors in their inspection activities; specifies duties of bodies and corporations responsible for nuclear safety of nuclear facilities; stipulates the obligation to set up emergency plans; and specifies penalties imposed on corporations and individuals for noncompliance with nuclear safety provisions. The Act entered into force on 4 April 1984. (J.B.)

76 FR 31350 - Cruise Vessel Safety and Security Act of 2010, Available Technology

Science.gov (United States)

2011-05-31

... DEPARTMENT OF HOMELAND SECURITY Coast Guard [Docket No. USCG-2011-0357] Cruise Vessel Safety and Security Act of 2010, Available Technology AGENCY: Coast Guard, DHS. ACTION: Notice of request for comments... Security and Safety Act of 2010(CVSSA), specifically related to video recording and overboard detection...

48 CFR 52.250-3 - SAFETY Act Block Designation/Certification.

Science.gov (United States)

2010-10-01

... its terms if they plan to take advantage of SAFETY Act coverage for their technology(ies). (d) All... unlawful. (2) Causes harm, including financial harm, to a person, property, or entity, in the United States... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

Improving Patient Safety: Improving Communication.

Science.gov (United States)

Bittner-Fagan, Heather; Davis, Joshua; Savoy, Margot

2017-12-01

Communication among physicians, staff, and patients is a critical element in patient safety. Effective communication skills can be taught and improved through training and awareness. The practice of family medicine allows for long-term relationships with patients, which affords opportunities for ongoing, high-quality communication. There are many barriers to effective communication, including patient factors, clinician factors, and system factors, but tools and strategies exist to address these barriers, improve communication, and engage patients in their care. Use of universal precautions for health literacy, appropriate medical interpreters, and shared decision-making are evidence-based tools that improve communication and increase patient safety. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

IMPROVING PATIENT SAFETY:

DEFF Research Database (Denmark)

Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

Improving patient safety is both a national and international priority as millions of patients Worldwide suffer injury or death every year due to unsafe care. University College Zealand employs innovative pedagogical approaches in educational design. Regional challenges related to geographic......, social and cultural factors have resulted in a greater emphasis upon digital technology. Attempts to improve patient safety by optimizing students’ competencies in relation to the reporting of clinical errors, has resulted in the development of an interdisciplinary e-learning concept. The program makes...

78 FR 12065 - Patient Safety Organizations: Delisting for Cause for Independent Data Safety Monitoring, Inc.

Science.gov (United States)

2013-02-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Safety Monitoring, Inc. due to its failure to correct a deficiency. The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the listing of PSOs, which are entities or component...

Some Subjects and Relations According to the Act about Safety at Work

OpenAIRE

Marino Đ. Učur

2015-01-01

Complex relations in the field of safety at work could not be present without the subjects which have a specific status and specific rights, obligations and responsibilities regulated by the Occupational Health and Safety Act. This paper deals with: employer’s designated employee for the implementation of occupational health and safety activities, employees’ elected representative for health and safety protection at work, occupational medicine specialist, occupational health and safety sp...

78 FR 17212 - Patient Safety Organizations: Voluntary Relinquishment From Universal Safety Solution PSO

Science.gov (United States)

2013-03-20

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Research and Quality (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26, provides for the...

Some Subjects and Relations According to the Act about Safety at Work

Directory of Open Access Journals (Sweden)

Marino Đ. Učur

2015-01-01

Full Text Available Complex relations in the field of safety at work could not be present without the subjects which have a specific status and specific rights, obligations and responsibilities regulated by the Occupational Health and Safety Act. This paper deals with: employer’s designated employee for the implementation of occupational health and safety activities, employees’ elected representative for health and safety protection at work, occupational medicine specialist, occupational health and safety specialist and the committee for safety at work in the relations of safety at work.

Nuclear safety in Slovak Republic. Status of safety improvements

International Nuclear Information System (INIS)

Toth, A.

1999-01-01

Status of the safety improvements at Bohunice V-1 units concerning WWER-440/V-230 design upgrading were as follows: supplementing of steam generator super-emergency feed water system; higher capacity of emergency core cooling system; supplementing of automatic links between primary and secondary circuit systems; higher level of secondary system automation. The goal of the modernization program for Bohunice V-1 units WWER-440/V-230 was to increase nuclear safety to the level of the proposals and IAEA recommendations and to reach probability goals of the reactor concerning active zone damage, leak of radioactive materials, failures of safety systems and damage shields. Upgrading program for Mochovce NPP - WWER-440/V-213 is concerned with improving the integrity of the reactor pressure vessel, steam generators 'leak before break' methods applied for the NPP, instrumentation and control of safety systems, diagnostic systems, replacement of in-core monitoring system, emergency analyses, pressurizers safety relief valves, hydrogen removal system, seismic evaluations, non-destructive testing, fire protection. Implementation of quality assurance has a special role in improvement of operational safety activities as well as safety management and safety culture, radiation protection, decommissioning and waste management and training. The Year 2000 problem is mentioned as well

47 CFR 80.305 - Watch requirements of the Communications Act and the Safety Convention.

Science.gov (United States)

2010-10-01

... and the Safety Convention. 80.305 Section 80.305 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Safety Watch Requirements and Procedures Ship Station Safety Watches § 80.305 Watch requirements of the Communications Act and the Safety...

76 FR 7854 - Patient Safety Organizations: Voluntary Delisting From Lumetra PSO

Science.gov (United States)

2011-02-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act... delivery. The Patient Safety and Quality Improvement Final Rule (Patient Safety Rule), 42 CFR part 3...

An optimization model for improving highway safety

Directory of Open Access Journals (Sweden)

Promothes Saha

2016-12-01

Full Text Available This paper developed a traffic safety management system (TSMS for improving safety on county paved roads in Wyoming. TSMS is a strategic and systematic process to improve safety of roadway network. When funding is limited, it is important to identify the best combination of safety improvement projects to provide the most benefits to society in terms of crash reduction. The factors included in the proposed optimization model are annual safety budget, roadway inventory, roadway functional classification, historical crashes, safety improvement countermeasures, cost and crash reduction factors (CRFs associated with safety improvement countermeasures, and average daily traffics (ADTs. This paper demonstrated how the proposed model can identify the best combination of safety improvement projects to maximize the safety benefits in terms of reducing overall crash frequency. Although the proposed methodology was implemented on the county paved road network of Wyoming, it could be easily modified for potential implementation on the Wyoming state highway system. Other states can also benefit by implementing a similar program within their jurisdictions.

Occupational Safety and Health Act Handbook for Vocational and Technical Education Teachers.

Science.gov (United States)

Shashack, Willard F., Ed.

The purpose of the handbook is to assist the school shop teacher in participating in voluntary compliance with the standards and regulations of the Occupational Safety and Health Act of 1970. The first major section deals with general shop safety and how the shop teacher can use the checklist to control possible safety violations in his shop. The…

The Occupational Safety and Health Act: Its Goals and Its Achievements. Evaluative Studies Series.

Science.gov (United States)

Smith, Robert Stewart

The safety and health mandate of the Occupational Safety and Health Act of 1970 is examined in reference to its effectiveness in reducing injuries and its consistency with the goal of promoting general welfare. Chapter 1 describes the essential features of the act and its administration to date, and analyzes the mandate as revealed by legislative…

Safety improvements of Temelin NPP

International Nuclear Information System (INIS)

Vita, J.

2000-01-01

A detailed overview is given of the efforts made to enhance the safety level of the plant considering recommendations of a number of assessment missions. A list is presented of 10 international missions of the IAEA at the Temelin plant, covering the period 1990 to 1998. For each mission the date and objective is given, the focus of the assessment is characterized, the international participation of experts is specified, and the main conclusions of the experts is reproduced. A commented list of 60 main design changes and safety improvements is also included, as they were implemented in the wake of various safety assessments. An overview of the Temelin safety improvement programme is attached, comprising brief descriptions of 30 planned improvement items together with the time schedules. (A.K.)

Design safety improvements of Kozloduy NPP

International Nuclear Information System (INIS)

Hinovski, I.

1999-01-01

Design safety improvements of Kozloduy NPP, discussed in detail, are concerned with: primary circuit integrity; reactor pressure vessel integrity; primary coolant piping integrity; primary coolant overpressure protection; leak before break status; design basis accidents and transients; severe accident analysis; improvements of safety and support systems; containment/confinement leak tightness and strength; seismic safety improvements; WWER-1000 control rod insertion; upgrading and modernization of Units 5 and 6; Year 2000 problem

Improving safety culture through the health and safety organization: a case study.

Science.gov (United States)

Nielsen, Kent J

2014-02-01

International research indicates that internal health and safety organizations (HSO) and health and safety committees (HSC) do not have the intended impact on companies' safety performance. The aim of this case study at an industrial plant was to test whether the HSO can improve company safety culture by creating more and better safety-related interactions both within the HSO and between HSO members and the shop-floor. A quasi-experimental single case study design based on action research with both quantitative and qualitative measures was used. Based on baseline mapping of safety culture and the efficiency of the HSO three developmental processes were started aimed at the HSC, the whole HSO, and the safety representatives, respectively. Results at follow-up indicated a marked improvement in HSO performance, interaction patterns concerning safety, safety culture indicators, and a changed trend in injury rates. These improvements are interpreted as cultural change because an organizational double-loop learning process leading to modification of the basic assumptions could be identified. The study provides evidence that the HSO can improve company safety culture by focusing on safety-related interactions. © 2013. Published by Elsevier Ltd and National Safety Council.

Proposed amendments to the Accord Acts to incorporate an offshore occupational health and safety regime

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-04-15

The Canada Atlantic Accords signed in 1985 with Newfoundland and Labrador and in 1986 with Nova Scotia facilitate the orderly development of petroleum resources in Canada's Atlantic offshore area. These accords established the Canada-Newfoundland and Labrador Offshore Petroleum Board and the Canada-Nova Scotia Offshore Petroleum Board and made them responsible, on behalf of the federal government and the respective provincial government, for the joint management of petroleum resources in the offshore area. While the federal and provincial governments are responsible for establishing the regime for operational safety and occupational health and safety to be administered by the 2 boards, there is no division of responsibilities between the provincial occupational health and safety regime and the Accord Acts. There is agreement amongst governments that the accord acts should be amended to clarify responsibilities and vest sole authority for occupational health and safety in the accord acts. This document outlined the policy intent of the proposed amendments to the Accord Acts to ground an occupational health and safety regime for the east coast offshore areas in legislation. The document discussed legislation to be amended; governance; and provisions of the occupational health and safety regime. General matters such as the application of the policy, allocation of responsibility and interpretation were also discussed. The general duties of the operators were identified along with specific duties of operators; duties related to transportation; occupational health and safety policy; health and safety management system; codes of practice; notification of accidents; duties of employers; and occupational health and safety program. Compliance and enforcement provisions were also summarized.

The safety of osmotically acting cathartics in colonic cleansing

DEFF Research Database (Denmark)

Nyberg, Caroline; Hendel, J.; Nielsen, O.H.

2010-01-01

Efficient cleansing of the colon before a colonoscopy or a radiological examination is essential. The osmotically acting cathartics (those given the Anatomical Therapeutic Chemical code A06AD) currently used for this purpose comprise products based on three main substances: sodium phosphate...... hyperphosphatemia and irreversible kidney damage owing to acute phosphate nephropathy, have been reported after use of sodium-phosphate-based products. The aim of this Review is to provide an update on the potential safety issues related to the use of osmotically acting cathartics, especially disturbances of renal...

75 FR 65263 - Virginia Graeme Baker Pool and Spa Safety Act; Public Accommodation; Withdrawal of Proposed Rule

Science.gov (United States)

2010-10-22

...'' or ``Act'') as ``an inn, hotel, motel, or other place of lodging, except for an establishment located... interpretive rule to interpret ``public accommodations facility'' in the VGB Act as ``an inn, hotel, motel, or... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1450 Virginia Graeme Baker Pool and Spa Safety Act...

Sign up to Safety: developing a safety improvement plan.

Science.gov (United States)

Dight, Carol; Peters, Hayley

2015-04-01

The Sign up to Safety (SutS) programme was launched in June 2014 by health secretary Jeremy Hunt. It focuses on listening to patients, carers and staff, learning from what they say when things go wrong, and then taking action to improve patient safety. The programme aims to make the NHS the safest healthcare system in the world by creating a culture devoted to continuous learning and improvement (NHS England 2014). Musgrove Park Hospital, part of Taunton and Somerset NHS Foundation Trust, was one of 12 NHS organisations that signed up to the SutS programme, making public its commitment to the national pledges to be 'open and transparent' and to develop a safety improvement plan. This paper describes the development of the strategy.

76 FR 71345 - Patient Safety Organizations: Voluntary Relinquishment From Child Health Patient Safety...

Science.gov (United States)

2011-11-17

... Organizations: Voluntary Relinquishment From Child Health Patient Safety Organization, Inc. AGENCY: Agency for... notification of voluntary relinquishment from Child Health Patient Safety Organization, Inc. of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety...

Taking up national safety alerts to improve patient safety in hospitals: The perspective of healthcare quality and risk managers.

Science.gov (United States)

Pfeiffer, Yvonne; Schwappach, David

2016-01-01

National safety alert systems publish relevant information to improve patient safety in hospitals. However, the information has to be transformed into local action to have an effect on patient safety. We studied three research questions: How do Swiss healthcare quality and risk managers (qm/rm(1)) see their own role in learning from safety alerts issued by the Swiss national voluntary reporting and analysis system? What are their attitudes towards and evaluations of the alerts, and which types of improvement actions were fostered by the safety alerts? A survey was developed and applied to Swiss healthcare risk and quality managers, with a response rate of 39 % (n=116). Descriptive statistics are presented. The qm/rm disseminate and communicate with a broad variety of professional groups about the alerts. While most respondents felt that they should know the alerts and their contents, only a part of them felt responsible for driving organizational change based on the recommendations. However, most respondents used safety alerts to back up their own patient safety goals. The alerts were evaluated positively on various dimensions such as usefulness and were considered as standards of good practice by the majority of the respondents. A range of organizational responses was applied, with disseminating information being the most common. An active role is related to using safety alerts for backing up own patient safety goals. To support an active role of qm/rm in their hospital's learning from safety alerts, appropriate organizational structures should be developed. Furthermore, they could be given special information or training to act as an information hub on the issues discussed in the alerts. Copyright © 2016. Published by Elsevier GmbH.

Improving versus maintaining nuclear safety

International Nuclear Information System (INIS)

2002-01-01

The concept of improving nuclear safety versus maintaining it has been discussed at a number of nuclear regulators meetings in recent years. National reports have indicated that there are philosophical differences between NEA member countries about whether their regulatory approaches require licensees to continuously improve nuclear safety or to continuously maintain it. It has been concluded that, while the actual level of safety achieved in all member countries is probably much the same, this is difficult to prove in a quantitative way. In practice, all regulatory approaches require improvements to be made to correct deficiencies and when otherwise warranted. Based on contributions from members of the NEA Committee on Nuclear Regulatory Activities (CNRA), this publication provides an overview of current nuclear regulatory philosophies and approaches, as well as insights into a selection of public perception issues. This publication's intended audience is primarily nuclear safety regulators, but government authorities, nuclear power plant operators and the general public may also be interested. (author)

Planned activities to improve safety

International Nuclear Information System (INIS)

1998-01-01

This document presents the fulfilling of the Brazilian obligations under the Convention on Nuclear Safety. The Chapter 6 of the document contains some details about the planed activities to safety improvements

Improving safety on rural local and tribal roads safety toolkit.

Science.gov (United States)

2014-08-01

Rural roadway safety is an important issue for communities throughout the country and presents a challenge for state, local, and Tribal agencies. The Improving Safety on Rural Local and Tribal Roads Safety Toolkit was created to help rural local ...

76 FR 23810 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Emergency Response...

Science.gov (United States)

2011-04-28

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Emergency Response Interoperability Center Public Safety Advisory Committee Meeting AGENCY... Fullano, Associate Chief, Public Safety and Homeland Security Bureau, Federal Communications Commission...

An analysis of the FDA Food Safety Modernization Act: protection for consumers and boon for business.

Science.gov (United States)

Strauss, Debra M

2011-01-01

This article analyzes components of the FDA Food Safety Modernization Act, which was prompted by incidents of food contamination, exploring the history of its passage and explaining its significance, as well as its limitations. As the first time in 70 years that food law has been changed substantially, this new law represents only an initial but significant step in the direction of improving food safety. With bipartisan support from both Congress and the President, this legislation embodies a mandate that food safety is at this moment becoming a priority. As a result, the time is ripe for a reassessment of other areas of food laws--particularly genetically modified foods and the use of milk and meat from cloned animals and their progeny--which are allowed under current U.S. law with no labeling, preapprovals, or post-market monitoring. These areas warrant special regulation consistent with the new proactive policy towards securing the safety of the food supply.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

Directory of Open Access Journals (Sweden)

Tomasz SZCZURASZEK

2016-07-01

Full Text Available The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the Personnel Continuing Education, the Hazardous Road Behaviour Monitoring, the Social Education for Safe Behaviour on Road, the Teaching Personnel Improvement, the Area Development and Planning Process Improvement, the Road Infrastructure Design Quality Improvement, and the Road and Traffic Management Process Efficiency Improvement. The basic aim of each system has been discussed as well as the most important tasks implemented as its part. The Road Safety Improvement Programme for the Kujawsko-Pomorskie Voivodeship presented in this article is a part of the National Road Safety Programme 2013-2020. Moreover, it is not only an original programme in Poland, but also a universal project that may be adapted for other voivodeships as well.

76 FR 10362 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2011-02-24

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal... Cybersecurity and Communications Reliability Public Safety and Homeland Security Bureau, Federal Communications...

77 FR 12054 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2012-02-28

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal..., Associate Bureau Chief, Public Safety and Homeland Security Bureau, Federal Communications Commission, 445...

77 FR 11120 - Patient Safety Organizations: Voluntary Relinquishment From UAB Health System Patient Safety...

Science.gov (United States)

2012-02-24

... Organizations: Voluntary Relinquishment From UAB Health System Patient Safety Organization AGENCY: Agency for... notification of voluntary relinquishment from the UAB Health System Patient Safety Organization of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005...

Research on the improvement of nuclear safety

International Nuclear Information System (INIS)

Yoo, Keon Joong; Kim, Dong Soo; Kim, Hui Dong; Park, Chang Kyu

1993-06-01

To improve the nuclear safety, this project is divided into three areas which are the development of safety analysis technology, the development of severe accident analysis technology and the development of integrated safety assessment technology. 1. The development of safety analysis technology. The present research aims at the development of necessary technologies for nuclear safety analysis in Korea. Establishment of the safety analysis technologies enables to reduce the expenditure both by eliminating excessive conservatisms incorporated in nuclear reactor design and by increasing safety margins in operation. It also contributes to improving plant safety through realistic analyses of the Emergency Operating Procedures (EOP). 2. The development of severe accident analysis technology. By the computer codes (MELCOR and CONTAIN), the in-vessel and the ex-vessel severe accident phenomena are simulated. 3. The development of integrated safety assessment technology. In the development of integrated safety assessment techniques, the included research areas are the improvement of PSA computer codes, the basic study on the methodology for human reliability analysis (HRA) and common cause failure (CCF). For the development of the level 2 PSA computer code, the basic research for the interface between level 1 and 2 PSA, the methodology for the treatment of containment event tree are performed. Also the new technologies such as artificial intelligence, object-oriented programming techniques are used for the improvement of computer code and the assessment techniques

Mochovce NPP safety improvement and completion

International Nuclear Information System (INIS)

1997-01-01

6th Nuclear society information meeting dealt with the completion of the Mochovce NPP with regard to implementation of safety measures. It was aimed to next problems: I. 'Survey' presentation on the situation of the nuclear power industry in partner countries; II. Basic technical presentations; III. Presentations of operators of the other VVER 440/213 NPPs on their activities in the field of safety improvement in relation to IAEA recommendations; IV. Technical solutions of safety improvements ranked with IAEA degree 3 (Report SC 108 VVER); V: Technical solutions of selected Safety Measures ranked with IAEA degree 2 and 1 (Report SC 108 VVER)

76 FR 54234 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2011-08-31

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal.... Postal Service Mail to Jeffery Goldthorp, Associate Bureau Chief, Public Safety and Homeland Security...

Coal Mine Health and Safety Regulation 2006 under the Coal Mine Health and Safety Act 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-12-22

The aim of the Act is to secure the health, safety and welfare of people in connection with coal operations (which include all places of work where coal is mined and certain other places). The Regulation contains provisions about the following matters: (a) places of work to which the Act does not apply, (b) duties relating to health, welfare and safety at coal operations, including the following: (i) the nomination of the operator of a coal operation and the provision of health and safety information for incoming operators, (ii) the contents of health and safety management systems for coal operations, (iii) major hazards and the contents of major hazard management plans for coal operations, (iv) duties relating to contractors, (v) the contents of management structures and emergency management systems for coal operations, escape and rescue plans and fire fighting plans and high risk activities, (c) notifications, including (i) notification of incidents, (ii) inquiries, (iii) notification of other matters to the Chief Inspector), (d) aspects of safety at coal operations, including the following: (i) controlled materials, plants and practices, (ii) coal dust explosion prevention and suppression, (iii) ventilation at coal operations, (iv) escape from coal operations, (v) the operation of transport at coal operations, (vi) surveys and certified plans, (vii) employment at coal operations, (e) the licensing of certain activities, (f) competence standards, (g) the Coal Competence Board, (h) check inspectors, (i) exemptions from provisions of this Regulation, (j) the following miscellaneous matters concerning coal mine health and safety: (i) the keeping of records and reporting, (ii) penalties, the review of decisions by the Administrative Decisions Tribunal, fees and charges, consultation, information and other miscellaneous matters, (k) savings and transitional provisions.

Current activities on safety improvement at Ukrainian NPPs

International Nuclear Information System (INIS)

Stovbun, V.V.

2000-01-01

This report describes general development status of the national programs on safety improvement of the Ukrainian NPPs, basic approaches adopted for planning and implementation of safety improvement works, and state of implementation of principal technical activities aimed at safety improvement of Ukrainian NPPs. (author)

75 FR 9899 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2010-03-04

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council; Notice of Public Meeting... Analysis Division, Public Safety and Homeland Security Bureau, Federal Communications Commission, 445 12th...

Nuclear safety and control act, chapter 9: An Act to establish the Canadian Nuclear Safety Commission and to make consequential amendements to other Acts

International Nuclear Information System (INIS)

1997-01-01

The purpose of this Act is to provide for: the limitation, to a reasonable level and in a manner that is consistent with Canada's international obligations, of the risks to national security, the health and safety of persons and the environment that are associated with the development, production and use of nuclear energy and the production, possession and use of nuclear substances, prescribed equipment and prescribed information; and the implementation in Canada of measures to which Canada has agreed respecting international control of the development, production and use of nuclear energy, including the non-proliferation of nuclear weapons and nuclear explosive devices

Australian Radiation Protection and Nuclear Safety Act 1998. Guide to the Australian radiation protection and nuclear safety licensing framework. 1. ed.

International Nuclear Information System (INIS)

1999-03-01

The purpose of this guide is to provide information to Commonwealth entities who may require a license under the Australian Radiation Protection and Nuclear Safety (ARPANS) Act 1998 to enable them to posses, have control of, use, operate or dispose of radiation sources. The guide describes to which agencies and what activities require licensing. It also addresses general administrative and legal matters such as appeal procedures, ongoing licensing requirements, monitoring and compliance. Applicants are advised to consult the Australian Radiation Protection and Nuclear Safety Act 1998 and accompanying Regulations when submitting applications

Australian Radiation Protection and Nuclear Safety Act 1998. Guide to the Australian radiation protection and nuclear safety licensing framework; 1. ed

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The purpose of this guide is to provide information to Commonwealth entities who may require a license under the Australian Radiation Protection and Nuclear Safety (ARPANS) Act 1998 to enable them to posses, have control of, use, operate or dispose of radiation sources. The guide describes to which agencies and what activities require licensing. It also addresses general administrative and legal matters such as appeal procedures, ongoing licensing requirements, monitoring and compliance. Applicants are advised to consult the Australian Radiation Protection and Nuclear Safety Act 1998 and accompanying Regulations when submitting applications

78 FR 10200 - Proposed Information Collection; Captive Wildlife Safety Act

Science.gov (United States)

2013-02-13

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-HQ-LE-2013-N020; FF09L00200-FX-LE12200900000] Proposed Information Collection; Captive Wildlife Safety Act AGENCY: Fish and Wildlife Service, Interior. ACTION: Notice; request for comments. SUMMARY: We (U.S. Fish and Wildlife Service) will ask the...

Implementing electronic handover: interventions to improve efficiency, safety and sustainability.

Science.gov (United States)

Alhamid, Sharifah Munirah; Lee, Desmond Xue-Yuan; Wong, Hei Man; Chuah, Matthew Bingfeng; Wong, Yu Jun; Narasimhalu, Kaavya; Tan, Thuan Tong; Low, Su Ying

2016-10-01

Effective handovers are critical for patient care and safety. Electronic handover tools are increasingly used today to provide an effective and standardized platform for information exchange. The implementation of an electronic handover system in tertiary hospitals can be a major challenge. Previous efforts in implementing an electronic handover tool failed due to poor compliance and buy-in from end-users. A new electronic handover tool was developed and incorporated into the existing electronic medical records (EMRs) for medical patients in Singapore General Hospital (SGH). There was poor compliance by on-call doctors in acknowledging electronic handovers, and lack of adherence to safety rules, raising concerns about the safety and efficiency of the electronic handover tool. Urgent measures were needed to ensure its safe and sustained use. A quality improvement group comprising stakeholders, including end-users, developed multi-faceted interventions using rapid PDSA (P-Plan, D-Do, S-Study, A-Act ) cycles to address these issues. Innovative solutions using media and online software provided cost-efficient measures to improve compliance. The percentage of unacknowledged handovers per day was used as the main outcome measure throughout all PDSA cycles. Doctors were also assessed for improvement in their knowledge of safety rules and their perception of the electronic handover tool. An electronic handover tool complementing daily clinical practice can be successfully implemented using solutions devised through close collaboration with end-users supported by the senior leadership. A combined 'bottom-up' and 'top-down' approach with regular process evaluations is crucial for its long-term sustainability. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

76 FR 64354 - Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small...

Science.gov (United States)

2011-10-18

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0529] Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small Business... amounts on small business, as set forth in the FDA Food Safety Modernization Act (FSMA). In particular...

76 FR 45818 - Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small...

Science.gov (United States)

2011-08-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0529] Burden of Food and Drug Administration Food Safety Modernization Act Fee Amounts on Small Business... burden of fee amounts on small business, as set forth in the FDA Food Safety Modernization Act (FSMA...

Leadership, safety climate, and continuous quality improvement: impact on process quality and patient safety.

Science.gov (United States)

McFadden, Kathleen L; Stock, Gregory N; Gowen, Charles R

2014-10-01

Successful amelioration of medical errors represents a significant problem in the health care industry. There is a need for greater understanding of the factors that lead to improved process quality and patient safety outcomes in hospitals. We present a research model that shows how transformational leadership, safety climate, and continuous quality improvement (CQI) initiatives are related to objective quality and patient safety outcome measures. The proposed framework is tested using structural equation modeling, based on data collected for 204 hospitals, and supplemented with objective outcome data from the Centers for Medicare and Medicaid Services. The results provide empirical evidence that a safety climate, which is connected to the chief executive officer's transformational leadership style, is related to CQI initiatives, which are linked to improved process quality. A unique finding of this study is that, although CQI initiatives are positively associated with improved process quality, they are also associated with higher hospital-acquired condition rates, a measure of patient safety. Likewise, safety climate is directly related to improved patient safety outcomes. The notion that patient safety climate and CQI initiatives are not interchangeable or universally beneficial is an important contribution to the literature. The results confirm the importance of using CQI to effectively enhance process quality in hospitals, and patient safety climate to improve patient safety outcomes. The overall pattern of findings suggests that simultaneous implementation of CQI initiatives and patient safety climate produces greater combined benefits.

Methods for safety culture improvement

International Nuclear Information System (INIS)

Sivintsev, Yu.V.

1998-01-01

New IAEA publication concerning the problems of safety assurance covering different aspects beginning from terminology applied and up to concrete examples of well and poor safety culture development at nuclear facilities is discussed. The safety culture is defined as such set of characteristics and specific activities of institutions and individual persons which states that safety problems of a nuclear facility are given the attention determined by their importance as being of highest priority. The statements of the new document have recommended, not mandatory character. It is emphasized that the process of safety culture improvement at nuclear facilities should be integral component of management procedure, not a bolt on extra

Improving patient safety: lessons from rock climbing.

Science.gov (United States)

Robertson, Nic

2012-02-01

How to improve patient safety remains an intractable problem, despite large investment and some successes. Academics have argued that the root of the problem is a lack of a comprehensive 'safety culture' in hospitals. Other safety-critical industries such as commercial aviation invest heavily in staff training to develop such a culture, but comparable programmes are almost entirely absent from the health care sector. In rock climbing and many other dangerous activities, the 'buddy system' is used to ensure that safety systems are adhered to despite adverse circumstances. This system involves two or more people using simple checks and clear communication to prevent problems causing harm. Using this system as an example could provide a simple, original and entertaining way of introducing medical students to the idea that human factors are central to ensuring patient safety. Teaching the buddy system may improve understanding and acceptance of other patient safety initiatives, and could also be used by junior doctors as a tool to improve the safety of their practice. © Blackwell Publishing Ltd 2012.

Safety improvement of Paks nuclear power plant

International Nuclear Information System (INIS)

Vamos, G.

1999-01-01

Safety upgrading completed in the early nineties at the Paks NPP include: replacement of steam generator safety valves and control valves; reliability improvement of the electrical supply system; modification of protection logic; enhancement of the fire protection; construction of full scope Training Simulator. Design safety upgrading measures achieved in recent years were concerned with: relocation of steam generator emergency feed-water supply; emergency gas removal from the primary coolant system; hydrogen management in the containment; protection against sumps; preventing of emergency core cooling system tanks from refilling. Increasing seismic resistance, containment assessment, refurbishment of reactor protection system, improving reliability of emergency electrical supply, analysis of internal hazards are now being implemented. Safety upgrading measures which are being prepared include: bleed and feed procedures; reactor over-pressurisation protection in cold state; treatment of steam generator primary to secondary leak accidents. Operational safety improvements are dealing with safety culture, training measures and facilities; symptom based emergency operating procedures; in-service inspection; fire protection. The significance of international cooperation is emphasised in view of achieving nuclear safety standards recognised in EU

Safety culture improvement. An adaptive management framework

International Nuclear Information System (INIS)

Obadia, Isaac Jose

2005-01-01

After the Chernobyl nuclear accident in 1986, the International Atomic Energy Agency (IAEA) established the safety culture concept as a proactive mean to contribute to safety improvement, starting a worldwide safety culture enhancement program within nuclear organizations mainly focused on nuclear power plants. More recently, the safety culture concept has been extended to non-power applications such as nuclear research reactors and nuclear technological research and development organizations. In 1999, the Nuclear Engineering Institute (IEN), a research and technological development unit of the Brazilian Nuclear Energy Commission (CNEN), started a management change program aiming at improving its performance level of excellence. This change program has been developed assuming the occurrence of complex causal inter-relationships between the organizational culture and the implementation of the management process. A systematic and adaptive management framework comprised of a safety culture improvement practice integrated to a management process based on the Criteria for Excellence of the Brazilian Quality Award Model, has been developed and implemented at IEN. The case study has demonstrated that the developed framework makes possible an effective safety culture improvement and simultaneously facilitates an effective implementation of the management process, thus providing some governance to the change program. (author)

EC6 safety design improvements

Energy Technology Data Exchange (ETDEWEB)

Yu, S.; Lee, A.G.; Soulard, M. [Candu Energy Inc., Mississauga, ON (Canada)

2014-07-01

The Enhanced CANDU 6 (EC6) builds on the proven high performance design such as the Qinshan CANDU 6 reactor, and has made improvements to safety, operational performance, and has incorporated extensive operational feedback. Completion of all three phases of the pre-licensing design review by the Canadian Regulator - the Canadian Nuclear Safety Commission has provided a higher level of assurance that the EC6 reference design has taken modern regulatory requirements and expectations into account and further confirmed that there are no fundamental barriers to licensing the EC6 design in Canada. The EC6 design is based on the defence-in-depth principles in INSAG-10 and provides further safety features that address the lessons learned from Fukushima. With these safety features, the EC6 design has strengthened accident prevention as the first priority in the defence-in-depth strategy, as outlined in INSAG-10. As well, the EC6 design has incorporated further mitigation measures to provide additional protection of the public and the environment if the preventive measures fail. The EC6 design has an appropriate combination of inherent, passive safety characteristics, engineered features and administrative safety measures to effectively prevent and mitigate severe accident progressions. A strong contributor to the robustness and redundancy of CANDU design is the two-group separation philosophy. This ensures a high degree of independence between safety systems as well as physical separation and functional independence in how fundamental safety functions are provided. This paper will describe the following safety features based on the application of defence-in-depth and design approach to prevent beyond design basis events progressing to severe accidents and to mitigate the consequences if it occurs: Improved steam generator heat sink via a more reliable emergency heat removal system; Increased time before manual field actions are required via enhanced capacity of

An examination of the Hazardous Materials Transportation Uniform Safety Act (HMTUSA): A southern perspective

International Nuclear Information System (INIS)

1992-03-01

On November 16,1990, President Bush signed into law the most comprehensive amendments to the Hazardous Materials Transportation Act (HMTA) in 15 years. The Hazardous Materials Transportation Uniform Safety Act of 1990 (HMTUSA) was created by Congress in an effort to strengthen and clarify the HMTA. This paper will discuss the act's provisions as they affect shipments of spent fuel and high-level radioactive materials as well as the impact of those provisions on routing and emergency response issues in the southern region. HMTUSA consists of seven key provisions that affect radioactive materials: clarification of regulatory jurisdiction; highway routing standards; broadened industry registration; safety permits for motor carriers of high risk materials; expanded nuclear transportation requirements; new provisions for emergency response training and planning; and a public process for assessing the feasibility of a federally operated central reporting system and data center. In addition to amending various HMTA provisions, the new HMTUSA act provides appropriations to carry out the specific goals of the legislation. The act authorizes appropriations for the 1991, 1992 and 1993 fiscal years

Improved safety in ski jumping.

Science.gov (United States)

Wester, K

1988-01-01

Among approximately 2,600 licensed Norwegian ski jumpers, only three injuries that caused a permanent medical disability of at least 10% were incurred during the 5 year period from 1982 through 1986. When compared to the previous 5 year period (1977 to 1981), a dramatic improvement in safety is seen, as both number and severity of such injuries were markedly reduced. There are several probable reasons for this improved safety record: better preparation of the jumps, the return to using only one standard heel block, and the fact that coaches are being more responsible, especially with younger jumpers.

77 FR 25179 - Patient Safety Organizations: Expired Listing for Medkinetics, LLC

Science.gov (United States)

2012-04-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Medkinetics, LLC of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the listing of PSOs, which are entities or component...

Act No. 15 of 22 April 1980 setting up the Nuclear Safety Council

International Nuclear Information System (INIS)

1980-01-01

The Spanish authorities are in the process or reorganising the public nuclear sector in order to separate the promotional and research aspects of the uses of nuclear energy for peaceful purposes from the regulation and control of such activities. To this effect this Act sets up a Nuclear Safety Council which takes over part of the duties and the personnel of the Junta de Energia Nuclear provided for by the Act of 29th April 1964 on Nuclear Energy. The new Nuclear Safety Council is a body which is independent of the State central administration and has legal personality as well as its own financial resources required to carry out its duties. The latter comprise, inter alia, proposing to the Government the regulations required in matters of nuclear safety and radiation protection; this includes the setting-up of standards and criteria for the selection of nuclear installation sites, in consultation with the local competent bodies. (NEA) [fr

A tool for safety evaluations of road improvements.

Science.gov (United States)

Peltola, Harri; Rajamäki, Riikka; Luoma, Juha

2013-11-01

Road safety impact assessments are requested in general, and the directive on road infrastructure safety management makes them compulsory for Member States of the European Union. However, there is no widely used, science-based safety evaluation tool available. We demonstrate a safety evaluation tool called TARVA. It uses EB safety predictions as the basis for selecting locations for implementing road-safety improvements and provides estimates of safety benefits of selected improvements. Comparing different road accident prediction methods, we demonstrate that the most accurate estimates are produced by EB models, followed by simple accident prediction models, the same average number of accidents for every entity and accident record only. Consequently, advanced model-based estimates should be used. Furthermore, we demonstrate regional comparisons that benefit substantially from such tools. Comparisons between districts have revealed significant differences. However, comparisons like these produce useful improvement ideas only after taking into account the differences in road characteristics between areas. Estimates on crash modification factors can be transferred from other countries but their benefit is greatly limited if the number of target accidents is not properly predicted. Our experience suggests that making predictions and evaluations using the same principle and tools will remarkably improve the quality and comparability of safety estimations. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Validity of Warrantless Searches under the Occupational Safety and Health Act of 1970

Science.gov (United States)

Shanks, Michael D.

1975-01-01

One of the most controversial federal acts providing for random administrative searches is the Occupational Safety and Health Act of 1970 (OSHA). The author reviews the search and seizure law and concludes that abandonment of Fourth Amendment rights should not be predicated on the mere convenience of even a justifiable regulatory scheme. (JT)

75 FR 57048 - Patient Safety Organizations: Voluntary Delisting

Science.gov (United States)

2010-09-17

... Organizations: Voluntary Delisting AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION... Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109... the listing of PSOs, which are entities or component organizations whose mission and primary activity...

Total safety management: An approach to improving safety culture

International Nuclear Information System (INIS)

Blush, S.M.

1993-01-01

A little over 4 yr ago, Admiral James D. Watkins became Secretary of Energy. President Bush, who had appointed him, informed Watkins that his principal task would be to clean up the nuclear weapons complex and put the US Department of Energy (DOE) back in the business of producing tritium for the nation's nuclear deterrent. Watkins recognized that in order to achieve these objectives, he would have to substantially improve the DOE's safety culture. Safety culture is a relatively new term. The International Atomic Energy Agency (IAEA) used it in a 1986 report on the root causes of the Chernobyl nuclear accident. In 1990, the IAEA's International Nuclear Safety Advisory Group issued a document focusing directly on safety culture. It provides guidelines to the international nuclear community for measuring the effectiveness of safety culture in nuclear organizations. Safety culture has two principal aspects: an organizational framework conducive to safety and the necessary organizational and individual attitudes that promote safety. These obviously go hand in hand. An organization must create the right framework to foster the right attitudes, but individuals must have the right attitudes to create the organizational framework that will support a good safety culture. The difficulty in developing such a synergistic relationship suggests that achieving and sustaining a strong safety culture is not easy, particularly in an organization whose safety culture is in serious disrepair

Patient safety--worker safety: building a culture of safety to improve healthcare worker and patient well-being.

Science.gov (United States)

Yassi, Annalee; Hancock, Tina

2005-01-01

Patient safety within the Canadian healthcare system is currently a high national priority, which merits a comprehensive understanding of the underlying causes of adverse events. Not least among these is worker health and safety, which is linked to patient outcomes. Healthcare workers have a high risk of workplace injuries and more mental health problems than most other occupational groups. Many healthcare professionals feel fatigued, stressed, in pain, or at risk of illness or injury-factors they feel impede their ability to provide consistent quality care. With this background, the Occupational Health and Safety Agency for Healthcare (OHSAH) in British Columbia, jointly governed by healthcare unions and healthcare employers, launched several major initiatives to improve the healthcare workplace. These included the promotion of safe patient handling, adaptive clothing, scheduled toileting, stroke management training, measures to improve management of aggressive behaviour and, of course, infection control-all intended to improve the safety of workers, but also to improve patient safety and quality of care. Other projects also explicitly promoting physical and mental health at work, as well as patient safety are also underway. Results of the projects are at various stages of completion, but ample evidence has already been obtained to indicate that looking after the well-being of healthcare workers results in safer and better quality patient care. While more research is needed, our work to date suggests that a comprehensive systems approach to promoting a climate of safety, which includes taking into account workplace organizational factors and physical and psychological hazards for workers, is the best way to improve the healthcare workplace and thereby patient safety.

76 FR 60495 - Patient Safety Organizations: Voluntary Relinquishment From Illinois PSO

Science.gov (United States)

2011-09-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... voluntary relinquishment from the Illinois PSO of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b...

Research reactor management. Safety improvement activities in HANARO

International Nuclear Information System (INIS)

Wu, Jong-Sup; Jung, Hoan-Sung; Hong, Sung Taek; Ahn, Guk-Hoon

2012-01-01

Safety activities in HANARO have been continuously conducted to enhance its safe operation. Great effort has been placed on a normalization and improvement of the safety attitude of the regular staff and other employees working at the reactor and other experimental facilities. This paper introduces the activities on safety improvement that were performed over the last few years. (author)

Improving patient safety culture in Saudi Arabia (2012-2015): trending, improvement and benchmarking.

Science.gov (United States)

Alswat, Khalid; Abdalla, Rawia Ahmad Mustafa; Titi, Maher Abdelraheim; Bakash, Maram; Mehmood, Faiza; Zubairi, Beena; Jamal, Diana; El-Jardali, Fadi

2017-08-02

Measuring patient safety culture can provide insight into areas for improvement and help monitor changes over time. This study details the findings of a re-assessment of patient safety culture in a multi-site Medical City in Riyadh, Kingdom of Saudi Arabia (KSA). Results were compared to an earlier assessment conducted in 2012 and benchmarked with regional and international studies. Such assessments can provide hospital leadership with insight on how their hospital is performing on patient safety culture composites as a result of quality improvement plans. This paper also explored the association between patient safety culture predictors and patient safety grade, perception of patient safety, frequency of events reported and number of events reported. We utilized a customized version of the patient safety culture survey developed by the Agency for Healthcare Research and Quality. The Medical City is a tertiary care teaching facility composed of two sites (total capacity of 904 beds). Data was analyzed using SPSS 24 at a significance level of 0.05. A t-Test was used to compare results from the 2012 survey to that conducted in 2015. Two adopted Generalized Estimating Equations in addition to two linear models were used to assess the association between composites and patient safety culture outcomes. Results were also benchmarked against similar initiatives in Lebanon, Palestine and USA. Areas of strength in 2015 included Teamwork within units, and Organizational Learning-Continuous Improvement; areas requiring improvement included Non-Punitive Response to Error, and Staffing. Comparing results to the 2012 survey revealed improvement on some areas but non-punitive response to error and Staffing remained the lowest scoring composites in 2015. Regression highlighted significant association between managerial support, organizational learning and feedback and improved survey outcomes. Comparison to international benchmarks revealed that the hospital is performing at or

[Does simulator-based team training improve patient safety?].

Science.gov (United States)

Trentzsch, H; Urban, B; Sandmeyer, B; Hammer, T; Strohm, P C; Lazarovici, M

2013-10-01

Patient safety became paramount in medicine as well as in emergency medicine after it was recognized that preventable, adverse events significantly contributed to morbidity and mortality during hospital stay. The underlying errors cannot usually be explained by medical technical inadequacies only but are more due to difficulties in the transition of theoretical knowledge into tasks under the conditions of clinical reality. Crew Resource Management and Human Factors which determine safety and efficiency of humans in complex situations are suitable to control such sources of error. Simulation significantly improved safety in high reliability organizations, such as the aerospace industry.Thus, simulator-based team training has also been proposed for medical areas. As such training is consuming in cost, time and human resources, the question of the cost-benefit ratio obviously arises. This review outlines the effects of simulator-based team training on patient safety. Such course formats are not only capable of creating awareness and improvements in safety culture but also improve technical team performance and emphasize team performance as a clinical competence. A few studies even indicated improvement of patient-centered outcome, such as a reduced rate of adverse events but further studies are required in this respect. In summary, simulator-based team training should be accepted as a suitable strategy to improve patient safety.

Safety goals and safety culture opening plenary. 1. WANO's Role in Maintaining and Improving Safety Culture

International Nuclear Information System (INIS)

Tsutsumi, Ryosuke

2001-01-01

Over the past several years, operators of the world's nuclear plants have compiled an increasingly impressive record of operational performance. Among the many factors that have led to this improvement are the unprecedented cooperation and information exchange among the world's nuclear operators. This paper presents the World Association of Nuclear Operators (WANO) operating experience program and WANO peer review program as examples of the kinds of interaction that are occurring around the globe to maintain and improve the nuclear safety culture. In addition, some unique features of WANO are discussed. WANO has established four programs to help its members communicate effectively with each other. These include the exchange of operating experiences, voluntary peer reviews, professional and technical development, and technical support and exchange. The operating experience program alerts members to events that have occurred at other NPPs and enables members to take appropriate actions to prevent event recurrence. When an event occurs at a plant, management at that plant analyses the event and completes an event report, which is then sent to the WANO regional center to which the plant belongs. After a regional center review and necessary iteration, the report is posted onto the WANO Web site to make it available to all WANO members. By the end of 2000, more than 1500 event reports had been posted. The WANO Peer Review Program is a unique opportunity for members to learn and share the best worldwide insights into safe and reliable nuclear operations. The peer review program has become one of WANO's most important activities containing all essential elements of WANO's mission. A WANO peer review team consists of 15 to 16 people with NPP experience; most team members are from countries outside the one that they are visiting. These teams of peers from plants around the world visit host plants upon request to identify strengths and areas for improvement, with a strong

Improving the safety of future nuclear fission power plants

International Nuclear Information System (INIS)

Frisch, W.; Gros, G.

2001-01-01

The main objectives and principles in nuclear fission reactor safety are presented, e.g. the defence in depth strategy and technical principles such as redundancy, diversity and physical separation. After a brief historical review of the continuous development of safety improvement, the most recent international discussion is presented. This includes mainly the international activities within IAEA and its International Nuclear Safety Advisory Group (INSAG). The safety improvement, presented in recommendations of IAEA and INSAG is expressed as an improvement of all elements and all levels of the defence in depth concept. Special emphasis is put on improvement of the highest level, which requires the implementation of means to mitigate consequences of accidents with severe core damage. The different future concepts are briefly characterised. Some examples from the French-German safety approach are taken to demonstrate how requirements for safety improvement by means of an enhancement of the defence in depth principle are developed

76 FR 60494 - Patient Safety Organizations: Voluntary Relinquishment From HPI-PSO

Science.gov (United States)

2011-09-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient... delivery. The Patient Safety and Quality Improvement Final Rule (Patient Safety Rule), 42 CFR Part 3...

Improving the safety and reliability of Monju

International Nuclear Information System (INIS)

Itou, Kazumoto; Maeda, Hiroshi; Moriyama, Masatoshi

1998-01-01

Comprehensive safety review has been performed at Monju to determine why the Monju secondary sodium leakage accident occurred. We investigated how to improve the situation based on the results of the safety review. The safety review focused on five aspects of whether the facilities for dealing with the sodium leakage accident were adequate: the reliability of the detection method, the reliability of the method for preventing the spread of the sodium leakage accident, whether the documented operating procedures are adequate, whether the quality assurance system, program, and actions were properly performed and so on. As a result, we established for Monju a better method of dealing with sodium leakage accidents, rapid detection of sodium leakage, improvement of sodium drain facilities, and way to reduce damage to Monju systems after an accident. We also improve the operation procedures and quality assurance actions to increase the safety and reliability of Monju. (author)

The awareness of employees in safety culture through the improved nuclear safety culture evaluation method

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Ga; Sung, Chan Ho; Jung, Yeon Sub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2012-10-15

After the Chernobyl nuclear accident in 1986, nuclear safety culture terminology was at first introduced emphasizing the importance of employees' attitude and organizational safety. The concept of safety culture was spread by INSAG 4 published in 1991. From that time, IAEA had provided the service of ASCOT for the safety culture assessment. However, many people still are thinking that safety culture is abstract and is not clear. It is why the systematic and reliable assessment methodology was not developed. Assessing safety culture is to identify what is the basic assumption for any organization to accept unconsciously. Therefore, it is very difficult to reach a meaningful conclusion by a superficial investigation alone. KHNP had been doing the safety culture assessment which was based on ASCOT methodology every 2 years. And this result had contributed to improving safety culture. But this result could not represent the level of organization's safety culture due to the limitation of method. So, KHNP has improved the safety culture method by benchmarking the over sea assessment techniques in 2011. The effectiveness of this improved methodology was validated through a pilot assessment. In this paper, the level of employees' safety culture awareness was analyzed by the improved method and reviewed what is necessary for the completeness and objectivity of the nuclear safety culture assessment methodology.

The awareness of employees in safety culture through the improved nuclear safety culture evaluation method

International Nuclear Information System (INIS)

Kim, Young Ga; Sung, Chan Ho; Jung, Yeon Sub

2012-01-01

After the Chernobyl nuclear accident in 1986, nuclear safety culture terminology was at first introduced emphasizing the importance of employees' attitude and organizational safety. The concept of safety culture was spread by INSAG 4 published in 1991. From that time, IAEA had provided the service of ASCOT for the safety culture assessment. However, many people still are thinking that safety culture is abstract and is not clear. It is why the systematic and reliable assessment methodology was not developed. Assessing safety culture is to identify what is the basic assumption for any organization to accept unconsciously. Therefore, it is very difficult to reach a meaningful conclusion by a superficial investigation alone. KHNP had been doing the safety culture assessment which was based on ASCOT methodology every 2 years. And this result had contributed to improving safety culture. But this result could not represent the level of organization's safety culture due to the limitation of method. So, KHNP has improved the safety culture method by benchmarking the over sea assessment techniques in 2011. The effectiveness of this improved methodology was validated through a pilot assessment. In this paper, the level of employees' safety culture awareness was analyzed by the improved method and reviewed what is necessary for the completeness and objectivity of the nuclear safety culture assessment methodology

EUROSAFE Forum for nuclear safety. Towards Convergence of Technical Nuclear Safety Practices in Europe. Safety Improvements - Reasons, Strategies, Implementation

Energy Technology Data Exchange (ETDEWEB)

Erven, Ulrich (ed.) [Gesellschaft fuer Anlagen- und Reaktorsicherheit, GRS mbH, Schwertnergasse 1, 50667 Koeln (Germany); Cherie, Jean-Bernard (ed.) [Institut de Radioprotection et de Surete Nucleaire, IRSN, BP 17, 92262 Fontenay-aux-Roses Cedex (France); Boeck, Benoit De (ed.) [Association Vincotte Nuclear, AVN, Rue Walcourt 148, 1070 Bruxelles (Belgium)

2005-07-01

The EUROSAFE Forum for Nuclear Safety is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE Web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety. The goal is to share experiences, to exchange technical and scientific opinions, and to conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum on 2005 focused on Safety Improvements, Reasons - Strategies - Implementation, from the point of view of the authorities, TSOs and industry. Latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe are presented. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining

EUROSAFE Forum for nuclear safety. Towards Convergence of Technical Nuclear Safety Practices in Europe. Safety Improvements - Reasons, Strategies, Implementation

Energy Technology Data Exchange (ETDEWEB)

Erven, Ulrich [Gesellschaft fuer Anlagen- und Reaktorsicherheit, GRS mbH, Schwertnergasse 1, 50667 Koeln (Germany); Cherie, Jean-Bernard [Institut de Radioprotection et de Surete Nucleaire, IRSN, BP 17, 92262 Fontenay-aux-Roses Cedex (France); Boeck, Benoit De [Association Vincotte Nuclear, AVN, Rue Walcourt 148, 1070 Bruxelles (Belgium)

2005-07-01

The EUROSAFE Forum for Nuclear Safety is part of the EUROSAFE approach, which consists of two further elements: the EUROSAFE Tribune and the EUROSAFE Web site. The general aim of EUROSAFE is to contribute to fostering the convergence of technical nuclear safety practices in a broad European context. This is done by providing technical safety and research organisations, safety authorities, power utilities, the rest of the industry and non-governmental organisations mainly from the European Union and East-European countries, and international organisations with a platform for the presentation of recent analyses and R and D in the field of nuclear safety. The goal is to share experiences, to exchange technical and scientific opinions, and to conduct debates on key issues in the fields of nuclear safety and radiation protection. The EUROSAFE Forum on 2005 focused on Safety Improvements, Reasons - Strategies - Implementation, from the point of view of the authorities, TSOs and industry. Latest work in nuclear installation safety and research, waste management, radiation safety as well as nuclear material and nuclear facilities security carried out by GRS, IRSN, AVN and their partners in the European Union, Switzerland and Eastern Europe are presented. A high level of nuclear safety is a priority for the countries of Europe. The technical safety organisations play an important role in contributing to that objective through appropriate approaches to major safety issues as part of their assessments and research activities. The challenges to nuclear safety are international. Changes in underlying technologies such as instrumentation and control, the impact of electricity market deregulation, demands for improved safety and safety management, the ageing of nuclear facilities, waste management, maintaining and improving scientific and technical knowledge, and the need for greater transparency - these are all issues where the value of an international approach is gaining

Twenty years of improvements in LWR safety

International Nuclear Information System (INIS)

Franks, S. III; Mulkey, J.P.; Moonka, A.

1996-01-01

Substantial improvements have been made in the safety of light-water reactors in the US during the past two decades, making currently operating reactors safer than ever before. Safety improvements have resulted both from regulatory and operational changes and from new knowledge and technology. The US Nuclear Regulatory Commission, the US Department of Energy, and the American nuclear power industry have worked together and with the international community to enhance the safety of existing plants and to incorporate lessons learned from prior operation into designs for a new generation of advanced, inherently safer reactors

77 FR 26280 - Patient Safety Organizations: Voluntary Relinquishment From CareRise LLC

Science.gov (United States)

2012-05-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... relinquishment from CareRise LLC of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the listing of PSOs, which are entities or...

A BWR Safety and Operability Improvements

International Nuclear Information System (INIS)

Sawyer, Craig D.

1993-01-01

The A BWR is the culmination of 30 years of design, development and operating experience of BWRs around the world. It represents across the board improvements is safety, operation and maintenance practices (O and M), economics, radiation exposure and rad waste generation. More than ten years and $20m5 went into the design and development of its new features, and it is now under construction in Japan. This paper concentrates on the safety and operability improvements. In the safety area, more than a decade improvement in core damage frequency (CDFR) has been assessed by formal PIRA techniques, with CDFR less than 10 -6 /year. Severe accident mitigation has also been formally addressed in the design. Plant operations were simplified by incorporation of better materials, optimum use of redundancy in mechanical and electrical equipment so that on-line maintenance can be performed, by better arrangements which account for required maintenance practices, and by an advanced control room

78 FR 48029 - Improving Chemical Facility Safety and Security

Science.gov (United States)

2013-08-07

... Improving Chemical Facility Safety and Security By the authority vested in me as President by the... at reducing the safety risks and security risks associated with hazardous chemicals. However... to further improve chemical facility safety and security in coordination with owners and operators...

Does lean management improve patient safety culture? An extensive evaluation of safety culture in a radiotherapy institute.

Science.gov (United States)

Simons, Pascale A M; Houben, Ruud; Vlayen, Annemie; Hellings, Johan; Pijls-Johannesma, Madelon; Marneffe, Wim; Vandijck, Dominique

2015-02-01

The importance of a safety culture to maximize safety is no longer questioned. However, achieving sustainable culture improvements are less evident. Evidence is growing for a multifaceted approach, where multiple safety interventions are combined. Lean management is such an integral approach to improve safety, quality and efficiency and therefore, could be expected to improve the safety culture. This paper presents the effects of lean management activities on the patient safety culture in a radiotherapy institute. Patient safety culture was evaluated over a three year period using triangulation of methodologies. Two surveys were distributed three times, workshops were performed twice, data from an incident reporting system (IRS) was monitored and results were explored using structured interviews with professionals. Averages, chi-square, logistical and multi-level regression were used for analysis. The workshops showed no changes in safety culture, whereas the surveys showed improvements on six out of twelve dimensions of safety climate. The intention to report incidents not reaching patient-level decreased in accordance with the decreasing number of reports in the IRS. However, the intention to take action in order to prevent future incidents improved (factorial survey presented β: 1.19 with p: 0.01). Due to increased problem solving and improvements in equipment, the number of incidents decreased. Although the intention to report incidents not reaching patient-level decreased, employees experienced sustained safety awareness and an increased intention to structurally improve. The patient safety culture improved due to the lean activities combined with an organizational restructure, and actual patient safety outcomes might have improved as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

Construction Safety, Health and Education Improvement Act of 1989. Hearing before the Committee on Labor and Human Resources, United States Senate, One Hundred First Congress, First Session on S. 930 To Establish a Clear and Comprehensive Prohibition of Discrimination on the Basis of Disability.

Science.gov (United States)

Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

This document reports the oral and written testimony of senators and representatives, administration officials, union officials, contractors' associations, engineers' associations, and construction and consulting companies concerning S. 930, a provision of the Construction Safety, Health and Education Improvement Act of 1989. This provision would…

Technical specification improvement through safety margin considerations

International Nuclear Information System (INIS)

Howard, R.C.; Jansen, R.L.

1986-01-01

Westinghouse has developed an approach for utilizing safety analysis margin considerations to improve plant operability through technical specification revision. This approach relies on the identification and use of parameter interrelations and sensitivities to identify acceptable operating envelopes. This paper summarizes technical specification activities to date and presents the use of safety margin considerations as another viable method to obtain technical specification improvement

Confidence improvement of disosal safety bydevelopement of a safety case for high-level radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Baik, Min Hoon; Ko, Nak Youl; Jeong, Jong Tae; Kim, Kyung Su [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-12-15

Many countries have developed a safety case suitable to their own countries in order to improve the confidence of disposal safety in deep geological disposal of high-level radioactive waste as well as to develop a disposal program and obtain its license. This study introduces and summarizes the meaning, necessity, and development process of the safety case for radioactive waste disposal. The disposal safety is also discussed in various aspects of the safety case. In addition, the status of safety case development in the foreign countries is briefly introduced for Switzerland, Japan, the United States of America, Sweden, and Finland. The strategy for the safety case development that is being developed by KAERI is also briefly introduced. Based on the safety case, we analyze the efforts necessary to improve confidence in disposal safety for high-level radioactive waste. Considering domestic situations, we propose and discuss some implementing methods for the improvement of disposal safety, such as construction of a reliable information database, understanding of processes related to safety, reduction of uncertainties in safety assessment, communication with stakeholders, and ensuring justice and transparency. This study will contribute to the understanding of the safety case for deep geological disposal and to improving confidence in disposal safety through the development of the safety case in Korea for the disposal of high-level radioactive waste.

Safety culture improvements in a nuclear laboratory setting

International Nuclear Information System (INIS)

Smith, K.L.; McKenna, J.

2014-01-01

In 2008, AECL performed a comprehensive safety culture assessment using recognized, industry-proven methodologies. Main observations were grouped into several key areas including standards, procedures, error-free work, and leadership fundamentals. Shortly thereafter, in 2009 May, the National Research Universal (NRU) reactor was shut down following discovery of a small leak of heavy water. Extensive repairs were required to return the reactor to service and a root cause investigation was conducted to determine the organizational and programmatic causes that led to the event. Taken together, these presented management with insights into common areas of weaknesses in performance and behaviours. A Corrective Action Plan (CAP) to address both the findings of the root cause analysis and safety culture assessment was captured in a comprehensive improvement plan issued in 2010 March, entitled the Voyageur Program Phase II (Voyageur II). The CAP addresses six key areas: Improve equipment reliability; Drive desired behaviours; Improve problem identification and resolution; Improve use of industry Operating Experience (OPEX) and reduce isolationism; Improve standards of operation; and, Improve management oversight. AECL's safety culture has been monitored regularly using quarterly surveys. A detailed safety culture assessment was executed in 2012 September. Compared with previous results, improvements for AECL were noted in the following areas: Use of Operating Experience, specifically in work planning, pre job briefs and training; Procedure quality; Availability of safety equipment; Control of temporary changes; and, Improved operational standards. (author)

Safety culture improvements in a nuclear laboratory setting

Energy Technology Data Exchange (ETDEWEB)

Smith, K.L.; McKenna, J. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

2014-07-01

In 2008, AECL performed a comprehensive safety culture assessment using recognized, industry-proven methodologies. Main observations were grouped into several key areas including standards, procedures, error-free work, and leadership fundamentals. Shortly thereafter, in 2009 May, the National Research Universal (NRU) reactor was shut down following discovery of a small leak of heavy water. Extensive repairs were required to return the reactor to service and a root cause investigation was conducted to determine the organizational and programmatic causes that led to the event. Taken together, these presented management with insights into common areas of weaknesses in performance and behaviours. A Corrective Action Plan (CAP) to address both the findings of the root cause analysis and safety culture assessment was captured in a comprehensive improvement plan issued in 2010 March, entitled the Voyageur Program Phase II (Voyageur II). The CAP addresses six key areas: Improve equipment reliability; Drive desired behaviours; Improve problem identification and resolution; Improve use of industry Operating Experience (OPEX) and reduce isolationism; Improve standards of operation; and, Improve management oversight. AECL's safety culture has been monitored regularly using quarterly surveys. A detailed safety culture assessment was executed in 2012 September. Compared with previous results, improvements for AECL were noted in the following areas: Use of Operating Experience, specifically in work planning, pre job briefs and training; Procedure quality; Availability of safety equipment; Control of temporary changes; and, Improved operational standards. (author)

Practicing industrial safety - issues involved

International Nuclear Information System (INIS)

Gunasekaran, P.

2016-01-01

Industrial safety is all about measures or techniques implemented to reduce the risk of injury, loss to persons, property or the environment in any industrial facility. The issue of industrial safety evolved concurrently with industrial development as a shift from compensation to prevention as well. Today, industrial safety is widely regarded as one of the most important factors that any business, large or small, must consider in its operations, as prevention of loss is also a part of profit. Factories Act of Central government and Rules made under it by the state deals with the provisions on industrial safety legislation. There are many other acts related to safety of personnel, property and environment. Occupational health and safety is also of primary concern. The aim is to regulate health and safety conditions for all employers. It includes safety standards and health standards. These acts encourage employers and employees to reduce workplace hazards and to implement new or improve existing safety and health standards; and develop innovative ways to achieve them. Maintain a reporting and record keeping system to monitor job-related injuries and illnesses; establish training programs to increase the number and competence of occupational safety and health personnel

Research notes : are safety corridors really safe? Evaluation of the corridor safety improvement program.

Science.gov (United States)

1998-08-26

High accident frequencies on Oregons highway corridors are of concern to the Oregon Department of Transportation (ODOT). : ODOT adopted the Corridor Safety Improvement Program as part of an overall program of safety improvements using federal and ...

Radiotherapy professionals faced with the obligation of treatments safety improvement

International Nuclear Information System (INIS)

2011-01-01

The occurrence of a major accident in Epinal (2006), followed by one in Toulouse (2007), led the Ministry of Health to mobilize the whole actors in radiotherapy in order to define national measures intended to improve health care security. Compiled in the so-called 'road map', these measures were presented in November 2007, and implemented in the 2009-2013 cancer programme. The French Institute for Radiological Protection and Nuclear Safety (IRSN) undertook a study aiming at assessing the effects of the above-mentioned measures on organization and safety management of radiotherapy facilities, but also on treatment achievement procedures and health professionals. More specifically, IRSN sought to examine the ability of health professionals to take into account new safety demands and to adapt their practices accordingly. With these purposes objectives, a qualitative study using the methods of ergonomics and sociology of organizations was completed in 2009-2010. The results of the study presented in this report show an effective improvement of health care safety along with a variable integration of safety measures depending on radiotherapy facilities and units. In particular, integration depends on 1) the governance mode of the health care facility, more or less conducive to promoting safety, 2) the pre-existence of a safety culture and safety organization, and 3) the facility commitment to health care safety improvement actions. The study also reveals that the implementation of new safety demands and the changes they involve create new constraints, which put pressure on health professionals and may threaten the durability of the improvements made. In order to facilitate the appropriation and implementation by radiotherapy units of the measures meant to improve health care safety, IRSN identifies 6 lines of thought: - strengthen coordination between institutional actors in order to ensure the consistency of the requests addressed to the facilities and limit their

76 FR 41246 - Pesticide Program Dialogue Committee, Pesticide Registration Improvement Act Process Improvement...

Science.gov (United States)

2011-07-13

... Committee, Pesticide Registration Improvement Act Process Improvement Workgroup; Notice of Public Meeting...) Process Improvement Work Group. EPA plans to meet its ESA consultation obligations through the pesticide... a pesticide during the registration review process. This meeting of the PRIA Process Improvement...

Stepping Up Occupational Safety and Health Through Employee Participation.

Science.gov (United States)

Vaughan, Gary R.

1986-01-01

The effectiveness of the Occupational Safety and Health Act of 1970 is examined, and it is suggested that employee participation could help improve occupational safety and health in the future, through safety committees, safety circles, safety teams, and individual participation. (MSE)

Gap Analysis Approach for Construction Safety Program Improvement

Directory of Open Access Journals (Sweden)

Thanet Aksorn

2007-06-01

Full Text Available To improve construction site safety, emphasis has been placed on the implementation of safety programs. In order to successfully gain from safety programs, factors that affect their improvement need to be studied. Sixteen critical success factors of safety programs were identified from safety literature, and these were validated by safety experts. This study was undertaken by surveying 70 respondents from medium- and large-scale construction projects. It explored the importance and the actual status of critical success factors (CSFs. Gap analysis was used to examine the differences between the importance of these CSFs and their actual status. This study found that the most critical problems characterized by the largest gaps were management support, appropriate supervision, sufficient resource allocation, teamwork, and effective enforcement. Raising these priority factors to satisfactory levels would lead to successful safety programs, thereby minimizing accidents.

Assessment of compliance of Employees and Management to Occupational Health & Safety Act in the Department of Public Safety in the North West Province / Neo Patricia Seleka

OpenAIRE

2011-01-01

The study was designed to determine the worker assessment of compliance to OHS act in the department of Public safety. One hundred and two (102) employees were selected randomly using table of random numbers from different directorates such as Human resources, Finance, Road safety, Crime prevention and Traffic management. Data were collected using a structured questionnaire which was made of personal characteristics and sections on level of compliance with OHS act, workers' ...

Measuring and improving patient safety through health information technology: The Health IT Safety Framework.

Science.gov (United States)

Singh, Hardeep; Sittig, Dean F

2016-04-01

Health information technology (health IT) has potential to improve patient safety but its implementation and use has led to unintended consequences and new safety concerns. A key challenge to improving safety in health IT-enabled healthcare systems is to develop valid, feasible strategies to measure safety concerns at the intersection of health IT and patient safety. In response to the fundamental conceptual and methodological gaps related to both defining and measuring health IT-related patient safety, we propose a new framework, the Health IT Safety (HITS) measurement framework, to provide a conceptual foundation for health IT-related patient safety measurement, monitoring, and improvement. The HITS framework follows both Continuous Quality Improvement (CQI) and sociotechnical approaches and calls for new measures and measurement activities to address safety concerns in three related domains: 1) concerns that are unique and specific to technology (e.g., to address unsafe health IT related to unavailable or malfunctioning hardware or software); 2) concerns created by the failure to use health IT appropriately or by misuse of health IT (e.g. to reduce nuisance alerts in the electronic health record (EHR)), and 3) the use of health IT to monitor risks, health care processes and outcomes and identify potential safety concerns before they can harm patients (e.g. use EHR-based algorithms to identify patients at risk for medication errors or care delays). The framework proposes to integrate both retrospective and prospective measurement of HIT safety with an organization's existing clinical risk management and safety programs. It aims to facilitate organizational learning, comprehensive 360 degree assessment of HIT safety that includes vendor involvement, refinement of measurement tools and strategies, and shared responsibility to identify problems and implement solutions. A long term framework goal is to enable rigorous measurement that helps achieve the safety

Program management plan for the conduct of a research, development, and demonstration program for improving the safety of nuclear powerplants

International Nuclear Information System (INIS)

1981-12-01

Congress passed Public Law 96-567, Nuclear Safety Research, Development, and Demonstration Act of 1980, (hereafter referred to as the Act) to provide for an accelerated and coordinated program of light water reactor safety research, development, and demonstration to be carried out by the Department of Energy. In order to assure that this program would be compatible with the needs of Nuclear Regulatory Commission (NRC) and industry, the Department of Energy (DOE) initiated its response to Section 4 of the Act by conducting individual information gathering meetings with NRC and a wide cross section of the nuclear industry. The Department received recommendations on needs of what type of activities would and would not be appropriate for the Department to assist in satisfying these needs. Based on the evaluation of these inputs, it is concluded that the Department's ongoing Light Water Reactor (LWR) safety program is responsive to the Act. Specifically, the Department's ongoing program includes tasks in the areas of regulatory assessment, risk assessment, fission product source term, and emergency preparedness as well as providing technical assistance to the Institute of Nuclear Power Operations (INPO) to improve training of nuclear power personnel. These were among the very high priority efforts that were identified as necessary and appropriate for support by the Department

ELECTRICAL SAFETY IMPROVEMENT PROJECT A COMPLEX WIDE TEAMING INITIATIVE

Energy Technology Data Exchange (ETDEWEB)

GRAY BJ

2007-11-26

This paper describes the results of a year-long project, sponsored by the Energy Facility Contractors Group (EFCOG) and designed to improve overall electrical safety performance throughout Department of Energy (DOE)-owned sites and laboratories. As evidenced by focused metrics, the Project was successful primarily due to the joint commitment of contractor and DOE electrical safety experts, as well as significant support from DOE and contractor senior management. The effort was managed by an assigned project manager, using classical project-management principles that included execution of key deliverables and regular status reports to the Project sponsor. At the conclusion of the Project, the DOE not only realized measurable improvement in the safety of their workers, but also had access to valuable resources that will enable them to do the following: evaluate and improve electrical safety programs; analyze and trend electrical safety events; increase electrical safety awareness for both electrical and non-electrical workers; and participate in ongoing processes dedicated to continued improvement.

76 FR 74788 - Patient Safety Organizations: Voluntary Relinquishment From HealthWatch, Inc.

Science.gov (United States)

2011-12-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... relinquishment from HealthWatch, Inc. of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26...

76 FR 7853 - Patient Safety Organizations: Voluntary Delisting From HealthDataPSO

Science.gov (United States)

2011-02-11

... Medical Error Management, LLC, of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety...

78 FR 17212 - Patient Safety Organizations: Voluntary Relinquishment From QAISys, Inc.

Science.gov (United States)

2013-03-20

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21-- b-26, provides for the formation of...

78 FR 70560 - Patient Safety Organizations: Voluntary Relinquishment From GE-PSO

Science.gov (United States)

2013-11-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety...), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21-b-26, provides for the formation of Patient...

Improving nuclear safety of VVER-440 units

International Nuclear Information System (INIS)

Nochev, T.; Sabinov, S.

2001-01-01

In this paper authors deals with improvement of nuclear safety of WWER-440 units in Kozloduy NPP. Main directions for improving nuclear safety of WWER-440 units were: - to expand number of the design accident; - to increase reliability of equipment important for the safety; - to decrease the probability of initiating events; - improvements the integrity of the primary circuit (application LBB concept, qualification of the pressure safety valves to avoid pressurized thermal shock); - improvement of the fire protection; - improvement of the operation including upgrading and improvement of operational documents, implementation of new system for training the operators and etc.; - reassessment of the seismic response of the plant. Main actions were made at NPP Kozloduy to increase nuclear safety of VVER-440 units. 1. Modernization of Emergency High Pressure Safety Injection System. The modernization includes dividing of independent channels with reservation of active elements. Pumps were exchanged with more effective and reliable ones. HPSIS was increased reliability in general through decrease number of active elements and exchanged with passive. 2. For the purpose of avoiding fast cooling at the primary circuit and obtaining thermal shock of reactor vessel, Main Safety Insulation Valves are installed at NPP Kozloduy. 3. Modernization of Emergency power supplies AC. Oil breakers VMP-10 are exchanged with gas FS-4. 4. Generator breakers are installed to decrease probability of loss power supply and blackout. They provide reliable power supply to the system important for the safety in case of failure on generator. 5. I and C system has been qualified and optimized. 6. Reassessments of Limiting Conditions of Operation and new scram signals have been introduced. 7. An operators-oriented Informational System has been developed. It includes ensuring and updating of equipment data, new informational support of operator and etc. 8. A new auxiliary independent system for

Leadership Actions to Improve Nuclear Safety Culture

International Nuclear Information System (INIS)

Clewett, L.K.

2016-01-01

The challenge many leaders face is how to effectively implement and then utilise the results of Safety Culture surveys. Bruce Power has recently successfully implemented changes to the Safety Culture survey process including how corrective actions were identified and implemented. The actions taken in response to the latest survey have proven effective with step change performance noted. Nuclear Safety is a core value for Bruce Power. Nuclear Safety at Bruce Power is based on the following four pillars: reactor safety, industrial safety, radiological safety and environmental safety. Processes and practices are in place to achieve a healthy Nuclear Safety Culture within Bruce Power such that nuclear safety is the overriding priority. This governance is based on industry leading practices which monitor, asses and take action to drive continual improvements in the Nuclear Safety Culture within Bruce Power.

PROPOSAL OF VOIVODESHIP ROAD SAFETY IMPROVEMENT PROGRAMME

OpenAIRE

Tomasz SZCZURASZEK; Jan KEMPA

2016-01-01

The article presents a proposal of the ‘GAMBIT KUJAWSKO-POMORSKI’ Road Safety Improvement Programme. The main idea of the Programme is to establish and initiate systems that will be responsible for the most important areas of activity within road safety, including road safety control, supervision, and management systems in the whole Voivodeship. In total, the creation and start of nine such systems has been proposed, namely: the Road Safety Management, the Integrated Road Rescue Service, the ...

76 FR 7854 - Patient Safety Organizations: Voluntary Delisting From Quality Excellence, Inc./PSO

Science.gov (United States)

2011-02-11

... Arkansas Foundation for Medical Care, of its status as a Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety...

Improving Employees' Safety Awareness in Healthcare Organizations Using the DMAIC Quality Improvement Approach.

Science.gov (United States)

Momani, Amer; Hirzallah, Muʼath; Mumani, Ahmad

Occupational injuries and illnesses in healthcare can cause great human suffering, incur high cost, and have an adverse impact on the quality of patient care. One of the most effective solutions for addressing health and safety issues and improving decisions at the point of care rests in raising employees' safety awareness to recognize, avoid, or respond to potential problems before they arise. In this article, the DMAIC Six Sigma model (Define, Measure, Analyze, Improve, Control) is used as a systematic program to measure, improve, and sustain employees' safety awareness in healthcare organizations. We report on a case study using the model, which was implemented and validated at a local hospital. First, the occupational health and safety knowledge that each job requires was identified. Next, the degree of competence of jobholders to meet these requirements was assessed. Based on the assessment, different awareness-raising efforts were proposed and implemented. The results showed significant improvement in the overall safety awareness compliance assessed: from 74.2% to 84.4% (p < .001) after the intervention. The proposed model ensures that the organization's awareness-raising efforts serve its actual needs and produce optimized and sustained results that eventually lead to safer healthcare service.

All About OSHA: The Who, What, Where, When, Why and How of the Occupational Safety and Health Act of 1970.

Science.gov (United States)

Occupational Safety and Health Administration, Washington, DC.

The pamphlet summarizes the operations of the Occupational Safety and Health Administration (OSHA) and the provisions of the Occupational Safety and Health Act of 1970. OSHA's mission is to assure safe and healthful working conditions and to preserve human resources. Employers and employees who are covered by the act and employer and employee…

Improving the safety of LWR power plants. Final report

International Nuclear Information System (INIS)

1980-04-01

This report documents the results of the Study to identify current, potential research issues and efforts for improving the safety of Light Water Reactor (LWR) power plants. This final report describes the work accomplished, the results obtained, the problem areas, and the recommended solutions. Specifically, for each of the issues identified in this report for improving the safety of LWR power plants, a description is provided in detail of the safety significance, the current status (including information sources, status of technical knowledge, problem solution and current activities), and the suggestions for further research and development. Further, the issues are ranked for action into high, medium, and low priority with respect to primarily (a) improved safety (e.g. potential reduction in public risk and occupational exposure), and secondly (b) reduction in safety-related costs

78 FR 6819 - Patient Safety Organizations: Voluntary Relinquishment From the BREF PSO

Science.gov (United States)

2013-01-31

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26, provides for the formation of...

78 FR 6820 - Patient Safety Organizations: Voluntary Relinquishment From Ryder Trauma Center

Science.gov (United States)

2013-01-31

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Quality (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21--b-26, provides for the formation...

75 FR 74050 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2010-11-30

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal...) Communications Security, Reliability, and Interoperability Council (CSRIC) will hold its fourth meeting on...

76 FR 11681 - Improving Public Safety Communications in the 800 MHz Band; New 800 MHz Band Plan for Puerto Rico...

Science.gov (United States)

2011-03-03

... (USVI). This action is necessary to meet the Commission's goals to improve public safety communications... Accordingly, it is ordered, pursuant to Sections 4(i) and 332 of the Communications Act of 1934, as amended... March 21, 2011. Sprint Nextel and relocating incumbents may agree to conduct face-to-face negotiations...

Health IT for Patient Safety and Improving the Safety of Health IT.

Science.gov (United States)

Magrabi, Farah; Ong, Mei-Sing; Coiera, Enrico

2016-01-01

Alongside their benefits health IT applications can pose new risks to patient safety. Problems with IT have been linked to many different types of clinical errors including prescribing and administration of medications; as well as wrong-patient, wrong-site errors, and delays in procedures. There is also growing concern about the risks of data breach and cyber-security. IT-related clinical errors have their origins in processes undertaken to design, build, implement and use software systems in a broader sociotechnical context. Safety can be improved with greater standardization of clinical software and by improving the quality of processes at different points in the technology life cycle, spanning design, build, implementation and use in clinical settings. Oversight processes can be set up at a regional or national level to ensure that clinical software systems meet specific standards. Certification and regulation are two mechanisms to improve oversight. In the absence of clear standards, guidelines are useful to promote safe design and implementation practices. Processes to identify and mitigate hazards can be formalised via a safety management system. Minimizing new patient safety risks is critical to realizing the benefits of IT.

Steam Pressure-Reducing Station Safety and Energy Efficiency Improvement Project

Energy Technology Data Exchange (ETDEWEB)

Lower, Mark D [ORNL; Christopher, Timothy W [ORNL; Oland, C Barry [ORNL

2011-06-01

The Facilities and Operations (F&O) Directorate is sponsoring a continuous process improvement (CPI) program. Its purpose is to stimulate, promote, and sustain a culture of improvement throughout all levels of the organization. The CPI program ensures that a scientific and repeatable process exists for improving the delivery of F&O products and services in support of Oak Ridge National Laboratory (ORNL) Management Systems. Strategic objectives of the CPI program include achieving excellence in laboratory operations in the areas of safety, health, and the environment. Identifying and promoting opportunities for achieving the following critical outcomes are important business goals of the CPI program: improved safety performance; process focused on consumer needs; modern and secure campus; flexibility to respond to changing laboratory needs; bench strength for the future; and elimination of legacy issues. The Steam Pressure-Reducing Station (SPRS) Safety and Energy Efficiency Improvement Project, which is under the CPI program, focuses on maintaining and upgrading SPRSs that are part of the ORNL steam distribution network. This steam pipe network transports steam produced at the ORNL steam plant to many buildings in the main campus site. The SPRS Safety and Energy Efficiency Improvement Project promotes excellence in laboratory operations by (1) improving personnel safety, (2) decreasing fuel consumption through improved steam system energy efficiency, and (3) achieving compliance with applicable worker health and safety requirements. The SPRS Safety and Energy Efficiency Improvement Project being performed by F&O is helping ORNL improve both energy efficiency and worker safety by modifying, maintaining, and repairing SPRSs. Since work began in 2006, numerous energy-wasting steam leaks have been eliminated, heat losses from uninsulated steam pipe surfaces have been reduced, and deficient pressure retaining components have been replaced. These improvements helped ORNL

75 FR 56533 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2010-09-16

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal...) Communications Security, Reliability, and Interoperability Council (CSRIC) will hold its third meeting on October...

77 FR 70777 - Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications...

Science.gov (United States)

2012-11-27

... FEDERAL COMMUNICATIONS COMMISSION Public Safety and Homeland Security Bureau; Federal Advisory Committee Act; Communications Security, Reliability, and Interoperability Council AGENCY: Federal... Security, Reliability, and Interoperability Council (CSRIC III) scheduled for December 5, 2012, at Federal...

SAFETY IMPROVES DRAMATICALLY IN FLUOR HANFORD SOIL AND GROUNDWATER REMEDIATION PROJECT

International Nuclear Information System (INIS)

GERBER MS

2007-01-01

This paper describes dramatic improvements in the safety record of the Soil and Groundwater Remediation Project (SGRP) at the Hanford Site in southeast Washington state over the past four years. During a period of enormous growth in project work and scope, contractor Fluor Hanford reduced injuries, accidents, and other safety-related incidents and enhanced a safety culture that earned the SGRP Star Status in the Department of Energy's (DOE's) Voluntary Protection Program (VPP) in 2007. This paper outlines the complex and multi-faceted work of Fluor Hanford's SGRP and details the steps taken by the project's Field Operations and Safety organizations to improve safety. Holding field safety meetings and walkdowns, broadening safety inspections, organizing employee safety councils, intensively flowing down safety requirements to subcontractors, and adopting other methods to achieve remarkable improvement in safety are discussed. The roles of management, labor and subcontractors are detailed. Finally, SGRP's safety improvements are discussed within the context of overall safety enhancements made by Fluor Hanford in the company's 11 years of managing nuclear waste cleanup at the Hanford Site

THE FLUORBOARD A STATISTICALLY BASED DASHBOARD METHOD FOR IMPROVING SAFETY

International Nuclear Information System (INIS)

PREVETTE, S.S.

2005-01-01

The FluorBoard is a statistically based dashboard method for improving safety. Fluor Hanford has achieved significant safety improvements--including more than a 80% reduction in OSHA cases per 200,000 hours, during its work at the US Department of Energy's Hanford Site in Washington state. The massive project on the former nuclear materials production site is considered one of the largest environmental cleanup projects in the world. Fluor Hanford's safety improvements were achieved by a committed partnering of workers, managers, and statistical methodology. Safety achievements at the site have been due to a systematic approach to safety. This includes excellent cooperation between the field workers, the safety professionals, and management through OSHA Voluntary Protection Program principles. Fluor corporate values are centered around safety, and safety excellence is important for every manager in every project. In addition, Fluor Hanford has utilized a rigorous approach to using its safety statistics, based upon Dr. Shewhart's control charts, and Dr. Deming's management and quality methods

77 FR 42738 - Patient Safety Organizations: Voluntary Relinquishment From the Coalition for Quality and Patient...

Science.gov (United States)

2012-07-20

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety Organizations: Voluntary Relinquishment From the Coalition for Quality and Patient Safety of Chicagoland (CQPS.... SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41,42...

A word from the DG: Improved safety at CERN

CERN Multimedia

2006-01-01

One of the important objectives of my term of office is improving safety at CERN. My consideration of safety issues over the last few months, in conjunction with the Safety Commission and the Heads of Department, has led me to define a new approach for the implementation of safety policy at CERN. It is not a question of changing the safety policy and the basic safety rules laid down in document 'Safety Policy at CERN' (SAPOCO 42) but, rather, of improving the way they are applied by clarifying the roles of everyone concerned. The existing safety policy and rules have yet to be fully implemented. Some people continue to think, for example, that safety implementation only concerns the Safety Commission (SC). In reality, as SAPOCO 42 clearly specifies, safety is the responsibility of each and every individual. This means that each person in charge of a task is also responsible for guaranteeing its safe completion by implementing all the necessary measures. To enhance the awareness of this responsibility and t...

NPP Temelin. Status of safety improvements

International Nuclear Information System (INIS)

1999-01-01

The WWER-1000 Temelin NPP under construction has been subjected as other NPPs of the same type to numerous project reviews resulting in quite a number of recommendations for design changes. Results of the IAEA mission to review the resolution of WWER-1000 safety issues at Temelin NPP are cited in this paper. The main conclusions emphasize that a combination of eastern and western technology and practices led to safety improvements in comparison with the international practices. Plant managers are clearly committed to implementation of operational programs which are consistent with effective western operational safety practices. Considerable effort remains to bring planned programs to successful implementation, in particular in meeting the need to foster strong safety culture among all personnel

Recipe Modification Improves Food Safety Practices during Cooking of Poultry.

Science.gov (United States)

Maughan, Curtis; Godwin, Sandria; Chambers, Delores; Chambers, Edgar

2016-08-01

Many consumers do not practice proper food safety behaviors when preparing food in the home. Several approaches have been taken to improve food safety behaviors among consumers, but there still is a deficit in actual practice of these behaviors. The objective of this study was to assess whether the introduction of food safety instructions in recipes for chicken breasts and ground turkey patties would improve consumers' food safety behaviors during preparation. In total, 155 consumers in two locations (Manhattan, KS, and Nashville, TN) were asked to prepare a baked chicken breast and a ground turkey patty following recipes that either did or did not contain food safety instructions. They were observed to track hand washing and thermometer use. Participants who received recipes with food safety instructions (n = 73) demonstrated significantly improved food safety preparation behaviors compared with those who did not have food safety instructions in the recipe (n = 82). In addition, the majority of consumers stated that they thought the recipes with instructions were easy to use and that they would be likely to use similar recipes at home. This study demonstrates that recipes could be a good source of food safety information for consumers and that they have the potential to improve behaviors to reduce foodborne illness.

SAFETY IMPROVES DRAMATICALLY IN FLUOR HANFORD SOIL AND GROUNDWATER REMEDIATION PROJECT

Energy Technology Data Exchange (ETDEWEB)

GERBER MS

2007-12-05

This paper describes dramatic improvements in the safety record of the Soil and Groundwater Remediation Project (SGRP) at the Hanford Site in southeast Washington state over the past four years. During a period of enormous growth in project work and scope, contractor Fluor Hanford reduced injuries, accidents, and other safety-related incidents and enhanced a safety culture that earned the SGRP Star Status in the Department of Energy's (DOE's) Voluntary Protection Program (VPP) in 2007. This paper outlines the complex and multi-faceted work of Fluor Hanford's SGRP and details the steps taken by the project's Field Operations and Safety organizations to improve safety. Holding field safety meetings and walkdowns, broadening safety inspections, organizing employee safety councils, intensively flowing down safety requirements to subcontractors, and adopting other methods to achieve remarkable improvement in safety are discussed. The roles of management, labor and subcontractors are detailed. Finally, SGRP's safety improvements are discussed within the context of overall safety enhancements made by Fluor Hanford in the company's 11 years of managing nuclear waste cleanup at the Hanford Site.

Comparing safety climate in naval aviation and hospitals: implications for improving patient safety.

Science.gov (United States)

Singer, Sara J; Rosen, Amy; Zhao, Shibei; Ciavarelli, Anthony P; Gaba, David M

2010-01-01

Evidence of variation in safety climate suggests the need for improvement among at least some hospitals. However, comparisons only among hospitals may underestimate the improvement required. Comparison of hospitals with analogous industries may provide a broader perspective on the safety status of our nation's hospitals. The purpose of this study was to compare safety climate among hospital workers with personnel from naval aviation, an organization that operates with high reliability despite intrinsically hazardous conditions. We surveyed a random sample of health care workers in 67 U.S. hospitals and, for generalizability, 30 veterans affairs hospitals using questions comparable with those posed at approximately the same time (2007) to a census of personnel from 35 squadrons of U.S. naval aviators. We received 13,841 (41%) completed surveys in U.S. hospitals, 5,511 (50%) in veterans affairs hospitals, and 14,854 (82%) among naval aviators. We examined differences in respondents' perceptions of safety climate at their institution overall and for 16 individual items. Safety climate was three times better on average among naval aviators than among hospital personnel. Naval aviators perceived a safer climate (up to seven times safer) than hospital personnel with respect to each of the 16 survey items. Compared with hospital managers, naval commanders perceived climate more like frontline personnel did. When contrasting naval aviators with hospital personnel working in comparably hazardous areas, safety climate discrepancies increased rather than decreased. One individual hospital performed as well as naval aviation on average, and at least one hospital outperformed the Navy benchmark for all but three individual survey items. Results suggest that hospitals have not sufficiently created a uniform priority of safety. However, if each hospital performed as well as the top-performing hospital in each area measured, hospitals could achieve safety climate levels comparable

The Health and Safety Executive's regulatory framework for control of nuclear criticality safety

International Nuclear Information System (INIS)

Smith, K.; Simister, D.N.

1991-01-01

In the United Kingdom the Health and Safety at Work Act, 1974 is the main legal instrument under which risks to people from work activities are controlled. Certain sections of the Nuclear Installations Act, 1965 which deal with the licensing of nuclear sites and the regulatory control of risks arising from them, including the risk from accidental criticality, are relevant statutory provisions of the Health and Safety at Work Act. The responsibility for safety rests with the operator who has to make and implement arrangements to prevent accidental criticality. The adequacy of these arrangements must be demonstrated in a safety case to the regulatory authorities. Operators are encouraged to treat each plant on its own merits and develop the safety case accordingly. The Nuclear Installations Inspectorate (NII), for its part, assesses the adequacy of the operator's safety case against the industry's own standards and criteria, but more particularly against the NII's safety assessment principles and guides, and international standards. Risks should be made as low as reasonably practicable. Generally, the NII seeks improvements in safety using an enforcement policy which operates at a number of levels, ranging from persuasion through discussion to the ultimate deterrent of withdrawal of a site licence. This paper describes the role of the NII, which includes a specialist criticality expertise, within the Health and Safety Executive, in regulating the nuclear sites from the criticality safety viewpoint. (Author)

76 FR 13643 - FDA Food Safety Modernization Act: Title III-A New Paradigm for Importers; Public Meeting

Science.gov (United States)

2011-03-14

... Act: Title III--A New Paradigm for Importers; Public Meeting AGENCY: Food and Drug Administration, HHS... announcing a public meeting entitled ``FDA Food Safety Modernization Act: Title III--A New Paradigm for... provided. Request special accommodations due By March 22, 2011.... Patricia M. Kuntze, 301- to disability...

An innovative fuel design concept for improved Light Water Reactor performance and safety

International Nuclear Information System (INIS)

Tulenko, J.S.; Connell, R.G.

1993-01-01

The primary goal of this research is to develop a new fuel design which will have improved thermal/mechanical performance characteristics greatly superior to current thermal and mechanical design performance. The mechanical/thermal constraints define the lifetime of the fuel, the maximum power at which the fuel can be operated, the probability of fuel failure over core lifetime, and the integrity of a core during a transient excursion. The thermal/mechanical limits act to degrade fuel integrity when they are violated. The purpose of this project is to investigate a novel design for light water reactor fuel which will extend fuel performance limits and improve reactor safety even further than is currently achieved. This project is investigating liquid metal bonding of LWR fuel in order to radically decrease fuel centerline temperatures which has major performance and safety benefits. The project will verify the compatibility of the liquid metal bond with both the fuel pellets and cladding material, verify the performance enhancement features of the new design over the fuel lifetime, and verify the economic fabricability of the concept and will show how this concept will benefit the LWR nuclear industry

48 CFR 852.222-70 - Contract Work Hours and Safety Standards Act-nursing home care contract supplement.

Science.gov (United States)

2010-10-01

... Safety Standards Act-nursing home care contract supplement. 852.222-70 Section 852.222-70 Federal...—nursing home care contract supplement. As prescribed in 822.305, for nursing home care requirements, insert the following clause: Contract Work Hours and Safety Standards Act—Nursing Home Care Contract...

Comparing the Affordable Care Act's Financial Impact on Safety-Net Hospitals in States That Expanded Medicaid and Those That Did Not.

Science.gov (United States)

Dobson, Allen; DaVanzo, Joan E; Haught, Randy; Phap-Hoa, Luu

2017-11-01

Safety-net hospitals play a vital role in delivering health care to Medicaid enrollees, the uninsured, and other vulnerable patients. By reducing the number of uninsured Americans, the Affordable Care Act (ACA) was also expected to lower these hospitals’ significant uncompensated care costs and shore up their financial stability. To examine how the ACA’s Medicaid expansion affected the financial status of safety-net hospitals in states that expanded Medicaid and in states that did not. Using Medicare hospital cost reports for federal fiscal years 2012 and 2015, the authors compared changes in Medicaid inpatient days as a percentage of total inpatient days, Medicaid revenues as a percentage of total net patient revenues, uncompensated care costs as a percentage of total operating costs, and hospital operating margins. Medicaid expansion had a significant, favorable financial impact on safety-net hospitals. From 2012 to 2015, safety-net hospitals in expansion states, compared to those in nonexpansion states, experienced larger increases in Medicaid inpatient days and Medicaid revenues as well as reduced uncompensated care costs. These changes improved operating margins for safety-net hospitals in expansion states. Margins for safety-net hospitals in nonexpansion states, meanwhile, declined.

76 FR 71346 - Patient Safety Organizations: Voluntary Relinquishment From Peminic Inc. dba The Peminic-Greeley PSO

Science.gov (United States)

2011-11-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Patient Safety Organization (PSO). The Patient Safety and Quality Improvement Act of 2005 (Patient Safety.... The Patient Safety and Quality Improvement Final Rule (Patient Safety Rule), 42 CFR part 3, authorizes...

To improve the safety of treatments in radiotherapy by developing a safety culture

International Nuclear Information System (INIS)

2008-01-01

Following the radiotherapy accidents between 2004 and 2006, the I.R.S.N. deemed necessary to lead a study on the safety of treatments in radiotherapy and on the use and the adaptation to the medical domain of safety analysis approach developed for the nuclear installations. Of this study, six mains lines of investigation appear: Endow the radiotherapy services with real referential of safety, reinforce the robustness of the organization of radiotherapy services, improve the safety of the equipment and software at the design and operating stages, improve the management of the expertise and reinforce the operating feed back on incidents and accidents. The main learning from this study is the benefit that could be gained by fitting the safety analysis concepts and methods to the specificities of radiotherapy considering the organization of it collective work, the cooperation between actors stemming from different jobs as well as the interactions between actors and technical systems in the process of the treatments, when they are put into service and during their periodic checks. (author)

Experience of safety and performance improvement for fuel handling equipment

International Nuclear Information System (INIS)

Gyoon Chang, Sang; Hee Lee, Dae

2014-01-01

The purpose of this study is to provide experience of safety and performance improvement of fuel handling equipment for nuclear power plants in Korea. The fuel handling equipment, which is used as an important part of critical processes during the refueling outage, has been improved to enhance safety and to optimize fuel handling procedures. Results of data measured during the fuel reloading are incorporated into design changes. The safety and performance improvement for fuel handling equipment could be achieved by simply modifying the components and improving the interlock system. The experience provided in this study can be useful lessons for further improvement of the fuel handling equipment. (authors)

Improvement of Managers’ Safety Knowledge through Scientifically Reasonable Interviews

Directory of Open Access Journals (Sweden)

Paas Õnnela

2015-11-01

Full Text Available The safety management system has been analysed in 16 Estonian enterprises using the MISHA method (Method for Industrial Safety and Health Activity Assessment. The factor analysis (principal component analysis and varimax with Kaiser analysis has been implemented for the interpretation of the results on safety performance at the enterprises implementing OHSAS 18001 and the ones that do not implement OHSAS 18001. The division of the safety areas into four parts for a better understanding of the safety level and its improvement possibilities has been proven through the statistical analysis. The connections between the questions aimed to clarify the safety level and performance at the enterprises have been set based on the statistics. New learning package “training through the questionnaires” has been worked out in the current paper for the top and middle-level managers to improve their safety knowledge, where the MISHA questionnaire has been taken as the basis.

77 FR 32975 - Patient Safety Organizations: Expired Listing for The American Cancer Biorepository, Inc. d/b/a...

Science.gov (United States)

2012-06-04

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Biorepository or ``ACB'' as a Patient Safety Organization (PSO) due to its failure to seek continued listing. The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act) authorizes the listing of...

Operational safety improvement in OPR 1000

International Nuclear Information System (INIS)

Jung, Y.-E.

2005-01-01

Nuclear power operating experience management might be an important factor for the operational safety improvement. KHNP's nuclear information management system, called KONIS receives, distributes and manages all nuclear information from domestic and foreign, especially operating experience. Ulchin 3 and 4, the first units of OPR 1000 series operates several organizations regarding management of operating experience e.g. specialist group program, various task forces, equipment specialist system for operator, etc. Peer review is another contribution for nuclear safety. (author)

Organizational factors influencing improvements in safety

International Nuclear Information System (INIS)

Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

1992-01-01

Research reported here seeks to identify the key organizational factors that influence safety-related performance indicators in nuclear power plants over time. It builds upon organizational factors identified in NUREG/CR-5437, and begins to develop a theory of safety-related performance and performance improvement based on economic and behavioral theories of the firm. Central to the theory are concepts of past performance, problem recognition, resource availability, resource allocation, and business strategies that focus attention. Variables which reflect those concepts are combined in statistical models and tested for their ability to explain scrams, safety system actuations, significant events, safety system failures, radiation exposure, and critical hours. Results show the performance indicators differ with respect to the sets of variables which serve as the best predictors of future performance, and past performance is the most consistent predictor of future performance

Can we improve patient safety?

Science.gov (United States)

Corbally, Martin Thomas

2014-01-01

Despite greater awareness of patient safety issues especially in the operating room and the widespread implementation of surgical time out World Health Organization (WHO), errors, especially wrong site surgery, continue. Most such errors are due to lapses in communication where decision makers fail to consult or confirm operative findings but worryingly where parental concerns over the planned procedure are ignored or not followed through. The WHO Surgical Pause/Time Out aims to capture these errors and prevent them, but the combination of human error and complex hospital environments can overwhelm even robust safety structures and simple common sense. Parents are the ultimate repository of information on their child's condition and planned surgery but are traditionally excluded from the process of Surgical Pause and Time Out, perhaps to avoid additional stress. In addition, surgeons, like pilots, are subject to the phenomenon of "plan-continue-fail" with potentially disastrous outcomes. If we wish to improve patient safety during surgery and avoid wrong site errors then we must include parents in the Surgical Pause/Time Out. A recent pilot study has shown that neither staff nor parents found it added to their stress, but, moreover, 100% of parents considered that it should be a mandatory component of the Surgical Pause nor does it add to the stress of surgery. Surgeons should be required to confirm that the planned procedure is in keeping with the operative findings especially in extirpative surgery and this "step back" should be incorporated into the standard Surgical Pause. It is clear that we must improve patient safety further and these simple measures should add to that potential.

Applying principles from safety science to improve child protection.

Science.gov (United States)

Cull, Michael J; Rzepnicki, Tina L; O'Day, Kathryn; Epstein, Richard A

2013-01-01

Child Protective Services Agencies (CPSAs) share many characteristics with other organizations operating in high-risk, high-profile industries. Over the past 50 years, industries as diverse as aviation, nuclear power, and healthcare have applied principles from safety science to improve practice. The current paper describes the rationale, characteristics, and challenges of applying concepts from the safety culture literature to CPSAs. Preliminary efforts to apply key principles aimed at improving child safety and well-being in two states are also presented.

78 FR 70560 - Patient Safety Organizations: Voluntary Relinquishment From Morgridge Institute for Research PSO

Science.gov (United States)

2013-11-26

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Patient Safety... Research and Quality (AHRQ), HHS. ACTION: Notice of delisting. SUMMARY: The Patient Safety and Quality Improvement Act of 2005 (Patient Safety Act), Public Law 109-41, 42 U.S.C. 299b-21-b-26, provides for the...

Improving patient safety in radiology: a work in progress

International Nuclear Information System (INIS)

Sze, Raymond W.

2008-01-01

The purpose of this paper is to share the experiences, including successes and failures, as well as the ongoing process of developing and implementing a safety program in a large pediatric radiology department. Building a multidisciplinary pediatric radiology safety team requires successful recruitment of team members, selection of a team leader, and proper and ongoing training and tools, and protected time. Challenges, including thorough examples, are presented on improving pediatric radiology safety intradepartmentally, interdepartmentally, and institutionally. Finally, some major challenges to improving safety in pediatric radiology, and healthcare in general, are presented along with strategies to overcome these challenges. Our safety program is a work in progress; this article is a personal account and the reader is asked for tolerance of its occasional subjective tone and contents. (orig.)

The role of individual diligence in improving safety.

Science.gov (United States)

Corbett, Angus; Travaglia, Jo; Braithwaite, Jeffrey

2011-01-01

This paper aims to be a theoretical examination of the role of individuals in sponsoring and facilitating effective, systemic change in organisations. Using reports of a number of high-profile initiatives to improve patient safety, it seeks to analyse the role of individual health care professionals in developing and facilitating new systems of care that improve safety and quality. The paper uses recent work in sociology that is concerned with the phenomenon of "sociological citizenship". The authors test whether successful initiators of change in health care can be described as sociological citizens. This notion of sociological citizens is applied to a number of highly successful initiatives to improve safety and quality to extrapolate the factors associated with individual clinician leadership, which may have affected the success of such endeavours. In each of the examples analysed the initiators of change can be characterised as sociological citizens. In reviewing the roles of these charismatic individuals it is evident that they see the relational interdependence between the individuals and organisations and that they use this information to achieve both professional and organisational objectives. The paper uses a case study method to investigate the usefulness of the role of sociological citizenship in interventions that aim to improve patient safety. The paper reviews the key concepts and uses of the concept of sociological citizenship to produce a framework against which the case studies were assessed. The authors suggest that a goal of policy for improving patient safety should be directed to the problem of how hospitals and health care organisations can create the conditions for encouraging the individual diligence and care that is needed to support reliable, safe health care practices. Improving the safety and quality of health care is an important public health initiative. It has also proven to be difficult to achieve sustained reductions in the harm

Patient handover in orthopaedics, improving safety using Information Technology.

Science.gov (United States)

Pearkes, Tim

2015-01-01

Good inpatient handover ensures patient safety and continuity of care. An adjunct to this is the patient list which is routinely managed by junior doctors. These lists are routinely created and managed within Microsoft Excel or Word. Following the merger of two orthopaedic departments into a single service in a new hospital, it was felt that a number of safety issues within the handover process needed to be addressed. This quality improvement project addressed these issues through the creation and implementation of a new patient database which spanned the department, allowing trouble free, safe, and comprehensive handover. Feedback demonstrated an improved user experience, greater reliability, continuity within the lists and a subsequent improvement in patient safety.

Safety improvement and results of commissioning of Mochovce NPP WWER 440/213

International Nuclear Information System (INIS)

Lipar, M.

1998-01-01

Mochovce NPP is the last one of this kind and compared to its predecessors, it is characterized by several modifications which contribute to the improvement of the safety level. In addition based on Nuclear Regulatory Authority requirements and based on documents: - IAEA - Safety Issues and their ranking for NPP WWER 440/213, - IAEA - Safety Improvement of Mochovce NPP Project Review Mission, - Riskaudit - Evaluation of the Mochovce NPP Safety Improvements. Additional safety measures have been implemented before commissioning. The consortium EUCOM (FRAMATOME - SIEMENS), SKODA Praha, ENERGOPROJEKT Praha, Russian organizations and VUJE Trnava Nuclear Power Plants research institute were selected for design and implementation of the safety measures. The papers summarized, safety requirements, safety measures implemented, results of commissioning and results of safety analysis report evaluation. (author)

Improving staff perception of a safety climate with crew resource management training.

Science.gov (United States)

Kuy, SreyRam; Romero, Ramon A L

2017-06-01

Communication failure is one of the top root causes in patient safety adverse events. Crew resource management (CRM) is a team building communication process intended to improve patient safety by improving team dynamics. First, to describe implementation of CRM in a Veterans Affair (VA) surgical service. Second, to assess whether staff CRM training is related to improvement in staff perception of a safety climate. Mandatory CRM training was implemented for all surgical service staff at a VA Hospital at 0 and 12 mo. Safety climate questionnaires were completed by operating room staff at a baseline, 6 and 12 mo after the initial CRM training. Participants reported improvement on all 27 points on the safety climate questionnaire at 6 mo compared with the baseline. At 12 mo, there was sustained improvement in 23 of the 27 areas. This is the first published report about the effect of CRM training on staff perception of a safety climate in a VA surgical service. We demonstrate that CRM training can be successfully implemented widespread in a surgical program. Overall, there was improvement in 100% of areas assessed on the safety climate questionnaire at 6 mo after CRM training. By 1 y, this improvement was sustained in 23 of 27 areas, with the areas of greatest improvement being the performance of briefings, collaboration between nurses and doctors, valuing nursing input, knowledge about patient safety, and institutional promotion of a patient safety climate. Published by Elsevier Inc.

Use of a Surgical Safety Checklist to Improve Team Communication.

Science.gov (United States)

Cabral, Richard A; Eggenberger, Terry; Keller, Kathryn; Gallison, Barry S; Newman, David

2016-09-01

To improve surgical team communication, a team at Broward Health Imperial Point Hospital, Ft Lauderdale, Florida, implemented a program for process improvement using a locally adapted World Health Organization Surgical Safety Checklist. This program included a standardized, comprehensive time out and a briefing/debriefing process. Postimplementation responses to the Safety Attitudes Questionnaire revealed a significant increase in the surgical team's perception of communication compared with that reported on the pretest (6% improvement resulting in t79 = -1.72, P improved surgical teamwork behaviors and an enhanced culture of safety in the OR. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

76 FR 58840 - Central Valley Project Improvement Act; Refuge Water Management Plans

Science.gov (United States)

2011-09-22

... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act; Refuge Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: To meet the requirements of the Central Valley Project Improvement Act of 1992 (CVPIA) and subsequent...

Using game theory to improve safety within chemical industrial parks

CERN Document Server

Reniers, Genserik

2013-01-01

Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

How to improve safety of laparoscopic cholecystectomy

Directory of Open Access Journals (Sweden)

ZHANG Yong

2013-06-01

Full Text Available Laparoscopic cholecystectomy (LC has become the "gold standard" of treatment for benign gallbladder disease. This paper summarizes various surgical safety measures used in recent years, and suggests an emphasis on perioperative imaging examination, preoperative prevention of risk factors, training of surgical skills, and introduction of fast-track surgery concept, so as to avoid the incidence of complications and improve the safety of LC.

Improving patient safety through quality assurance.

Science.gov (United States)

Raab, Stephen S

2006-05-01

Anatomic pathology laboratories use several quality assurance tools to detect errors and to improve patient safety. To review some of the anatomic pathology laboratory patient safety quality assurance practices. Different standards and measures in anatomic pathology quality assurance and patient safety were reviewed. Frequency of anatomic pathology laboratory error, variability in the use of specific quality assurance practices, and use of data for error reduction initiatives. Anatomic pathology error frequencies vary according to the detection method used. Based on secondary review, a College of American Pathologists Q-Probes study showed that the mean laboratory error frequency was 6.7%. A College of American Pathologists Q-Tracks study measuring frozen section discrepancy found that laboratories improved the longer they monitored and shared data. There is a lack of standardization across laboratories even for governmentally mandated quality assurance practices, such as cytologic-histologic correlation. The National Institutes of Health funded a consortium of laboratories to benchmark laboratory error frequencies, perform root cause analysis, and design error reduction initiatives, using quality assurance data. Based on the cytologic-histologic correlation process, these laboratories found an aggregate nongynecologic error frequency of 10.8%. Based on gynecologic error data, the laboratory at my institution used Toyota production system processes to lower gynecologic error frequencies and to improve Papanicolaou test metrics. Laboratory quality assurance practices have been used to track error rates, and laboratories are starting to use these data for error reduction initiatives.

Alternative off-site power supply improves nuclear power plant safety

International Nuclear Information System (INIS)

Gjorgiev, Blaže; Volkanovski, Andrija; Kančev, Duško; Čepin, Marko

2014-01-01

Highlights: • Additional power supply for mitigation of the station blackout event in NPP is used. • A hydro power plant is considered as an off-site alternative power supply. • An upgrade of the probabilistic safety assessment from its traditional use is made. • The obtained results show improvement of nuclear power plant safety. - Abstract: A reliable power system is important for safe operation of the nuclear power plants. The station blackout event is of great importance for nuclear power plant safety. This event is caused by the loss of all alternating current power supply to the safety and non-safety buses of the nuclear power plant. In this study an independent electrical connection between a pumped-storage hydro power plant and a nuclear power plant is assumed as a standpoint for safety and reliability analysis. The pumped-storage hydro power plant is considered as an alternative power supply. The connection with conventional accumulation type of hydro power plant is analysed in addition. The objective of this paper is to investigate the improvement of nuclear power plant safety resulting from the consideration of the alternative power supplies. The safety of the nuclear power plant is analysed through the core damage frequency, a risk measure assess by the probabilistic safety assessment. The presented method upgrades the probabilistic safety assessment from its common traditional use in sense that it considers non-plant sited systems. The obtained results show significant decrease of the core damage frequency, indicating improvement of nuclear safety if hydro power plant is introduced as an alternative off-site power source

Improving health care quality and safety: the role of collective learning.

Science.gov (United States)

Singer, Sara J; Benzer, Justin K; Hamdan, Sami U

2015-01-01

Despite decades of effort to improve quality and safety in health care, this goal feels increasingly elusive. Successful examples of improvement are infrequently replicated. This scoping review synthesizes 76 empirical or conceptual studies (out of 1208 originally screened) addressing learning in quality or safety improvement, that were published in selected health care and management journals between January 2000 and December 2014 to deepen understanding of the role that collective learning plays in quality and safety improvement. We categorize learning activities using a theoretical model that shows how leadership and environmental factors support collective learning processes and practices, and in turn team and organizational improvement outcomes. By focusing on quality and safety improvement, our review elaborates the premise of learning theory that leadership, environment, and processes combine to create conditions that promote learning. Specifically, we found that learning for quality and safety improvement includes experimentation (including deliberate experimentation, improvisation, learning from failures, exploration, and exploitation), internal and external knowledge acquisition, performance monitoring and comparison, and training. Supportive learning environments are characterized by team characteristics like psychological safety, appreciation of differences, openness to new ideas social motivation, and team autonomy; team contextual factors including learning resources like time for reflection, access to knowledge, organizational capabilities; incentives; and organizational culture, strategy, and structure; and external environmental factors including institutional pressures, environmental dynamism and competitiveness and learning collaboratives. Lastly learning in the context of quality and safety improvement requires leadership that reinforces learning through actions and behaviors that affect people, such as coaching and trust building, and through

Selection of indicators for continuous monitoring of patient safety: recommendations of the project 'safety improvement for patients in Europe'

DEFF Research Database (Denmark)

Kristensen, Solvejg; Mainz, Jan; Bartels, Paul

2009-01-01

such as culture, infections, surgical complications, medication errors, obstetrics, falls and specific diagnostic areas. CONCLUSION: The patient safety indicators recommended present a set of possible measures of patient safety. One of the future perspectives of implementing patient safety indicators...... for systematic monitoring is that it will be possible to continuously estimate the prevalence and incidence of patient safety quality problems. The lesson learnt from quality improvement is that it will pay off in terms of improving patient safety....

Improving patient safety in Libya: insights from a British health system perspective.

Science.gov (United States)

Elmontsri, Mustafa; Almashrafi, Ahmed; Dubois, Elizabeth; Banarsee, Ricky; Majeed, Azeem

2018-04-16

Purpose Patient safety programmes aim to make healthcare safe for both patients and health professionals. The purpose of this paper is to explore the UK's patient safety improvement programmes over the past 15 years and explore what lessons can be learnt to improve Libyan healthcare patient safety. Design/methodology/approach Publications focusing on UK patient safety were searched in academic databases and content analysed. Findings Several initiatives have been undertaken over the past 15 years to improve British healthcare patient safety. Many stakeholders are involved, including regulatory and professional bodies, educational providers and non-governmental organisations. Lessons can be learnt from the British journey. Practical implications Developing a national patient safety strategy for Libya, which reflects context and needs is paramount. Above all, Libyan patient safety programmes should reference internationally approved guidelines, evidence, policy and learning from Britain's unique experience. Originality/value This review examines patient safety improvement strategies adopted in Britain to help developing country managers to progress local strategies based on lessons learnt from Britain's unique experience.

Modelling of safety barriers including human and organisational factors to improve process safety

DEFF Research Database (Denmark)

Markert, Frank; Duijm, Nijs Jan; Thommesen, Jacob

2013-01-01

It is believed that traditional safety management needs to be improved on the aspect of preparedness for coping with expected and unexpected deviations, avoiding an overly optimistic reliance on safety systems. Remembering recent major accidents, such as the Deep Water Horizon, the Texas City....... A valuable approach is the inclusion of human and organisational factors into the simulation of the reliability of the technical system using event trees and fault trees and the concept of safety barriers. This has been demonstrated e.g. in the former European research project ARAMIS (Accidental Risk...

An integrated approach for improving occupational health and safety management: the voluntary protection program in Taiwan.

Science.gov (United States)

Su, Teh-Sheng; Tsai, Way-Yi; Yu, Yi-Chun

2005-05-01

A voluntary compliance program for occupational health and safety management, Voluntary Protection Programs (VPP), was implemented with a strategy of cooperation and encouragement in Taiwan. Due to limitations on increasing the human forces of inspection, a regulatory-based guideline addressing the essence of Occupational Health and Safety Management Systems (OHSMS) was promulgated, which combined the resources of third parties and insurance providers to accredit a self-improving worksite with the benefits of waived general inspection and a merit contributing to insurance premium payment reduction. A designated institute accepts enterprise's applications, performs document review and organizes the onsite inspection. A final review committee of Council of Labor Affairs (CLA) confers a two-year certificate on an approved site. After ten years, the efforts have shown a dramatic reduction of occupational injuries and illness in the total number of 724 worksites granted certification. VPP worksites, in comparison with all industries, had 49% lower frequency rate in the past three years. The severity rate reduction was 80% in the same period. The characteristics of Taiwan VPP program and international occupational safety and health management programs are provided. A Plan-Do-Check-Act management cycle was employed for pursuing continual improvements to the culture fostered. The use of a quantitative measurement for assessing the performance of enterprises' occupational safety and health management showed the efficiency of the rating. The results demonstrate that an employer voluntary protection program is a promising strategy for a developing country.

Patient Education May Improve Perioperative Safety.

NARCIS (Netherlands)

de Haan, L.S.; Calsbeek, H; Wolff, André

2016-01-01

Importance: There is a growing interest in enabling ways for patients to participate in their own care to improve perioperative safety, but little is known about the effectiveness of interventions enhancing an active patient role. Objective: To evaluate the effect of patient participation on

Safety implications of standardized continuous quality improvement programs in community pharmacy.

Science.gov (United States)

Boyle, Todd A; Ho, Certina; Mackinnon, Neil J; Mahaffey, Thomas; Taylor, Jeffrey M

2013-06-01

Standardized continuous quality improvement (CQI) programs combine Web-based technologies and standardized improvement processes, tools, and expectations to enable quality-related events (QREs) occurring in individual pharmacies to be shared with pharmacies in other jurisdictions. Because standardized CQI programs are still new to community pharmacy, little is known about how they impact medication safety. This research identifies key aspects of medication safety that change as a result of implementing a standardized CQI program. Fifty-three community pharmacies in Nova Scotia, Canada, adopted the SafetyNET-Rx standardized CQI program in April 2010. The Institute for Safe Medication Practices (ISMP) Canada's Medication Safety Self-Assessment (MSSA) survey was administered to these pharmacies before and 1 year into their use of the SafetyNET-Rx program. The nonparametric Wilcoxon signed-rank test was used to explore where changes in patient safety occurred as a result of SafetyNETRx use. Significant improvements occurred with quality processes and risk management, staff competence, and education, and communication of drug orders and other information. Patient education, environmental factors, and the use of devices did not show statistically significant changes. As CQI programs are designed to share learning from QREs, it is reassuring to see that the largest improvements are related to quality processes, risk management, staff competence, and education.

Review of Post-Marketing Safety Data on Tapentadol, a Centrally Acting Analgesic.

Science.gov (United States)

Stollenwerk, Ariane; Sohns, Melanie; Heisig, Fabian; Elling, Christian; von Zabern, Detlef

2018-01-01

Tapentadol is a centrally acting analgesic that has been available for the management of acute and chronic pain in routine clinical practice since 2009. This is the first integrated descriptive analysis of post-marketing safety data following the use of tapentadol in a broad range of pain conditions relating to the topics overall safety, dose administration above approved dosages, administration during pregnancy, serotonin syndrome, respiratory depression, and convulsion. The data analyzed pertain to spontaneous reports from healthcare and non-healthcare professionals and were put in the context of safety information known from interventional and non-interventional trials. The first years of routine clinical practice experience with tapentadol have confirmed the tolerability profile that emerged from the clinical trials. Moreover, the reporting of expected side effects such as respiratory depression and convulsion was low and no major risks were identified. The evaluation of available post-marketing data did not confirm the theoretical risk of serotonin syndrome nor did it reveal unexpected side effects with administration of higher than recommended doses. More than 8 years after its first introduction, the favorable overall safety profile of tapentadol in the treatment of various pain conditions is maintained in the general population. Grünenthal GmbH.

[Improving patient safety through voluntary peer review].

Science.gov (United States)

Kluge, S; Bause, H

2015-01-01

The intensive care unit (ICU) is one area of the hospital in which processes and communication are of primary importance. Errors in intensive care units can lead to serious adverse events with significant consequences for patients. Therefore quality and risk-management are important measures when treating critically ill patients. A pragmatic approach to support quality and safety in intensive care is peer review. This approach has gained significant acceptance over the past years. It consists of mutual visits by colleagues who conduct standardised peer reviews. These reviews focus on the systematic evaluation of the quality of an ICU's structure, its processes and outcome. Together with different associations, the State Chambers of Physicians and the German Medical Association have developed peer review as a standardized tool for quality improvement. The common goal of all stakeholders is the continuous and sustainable improvement in intensive care with peer reviews significantly increasing and improving communication between professions and disciplines. Peer reviews secure the sustainability of planned change processes and consequently lead the way to an improved culture of quality and safety.

Quantifying the effectiveness of ITS in improving safety of VRUs

NARCIS (Netherlands)

Silla, A.; Rämä, P.; Leden, L.; Noort, M. van; Kruijff, J. de; Bell, D.; Morris, A.; Hancox, G.; Scholliers, J.

2017-01-01

This paper presents the results of a safety impact assessment, providing quantitative estimates of the safety impacts of ten intelligent transport systems (ITS) which were designed to improve safety, mobility and comfort of vulnerable road users (VRUs). The evaluation method originally developed to

Range and limits of application of Sec.12, Atomic Energy Act, as a legal basis of the nuclear plant safety ordinance

International Nuclear Information System (INIS)

Schmidt-Preuss, Matthias

2009-01-01

Ensuring plant safety is a key purpose of nuclear law. Sec.7 II No.3, Atomic Energy Act, is considered the basic norm of nuclear legislation. The main requirement this embodies is ensuring 'the provisions against damage arising from construction and operation of a plant as required in accordance with the state of the art'. These normative requirements constitute the strictest yardstick existing in legislation about technology. Putting it into effect has always been the purpose of the set of nuclear rules and regulations constituting the next lower level of legislation, which so far have developed by evolution and are now to be updated comprehensively in the format of so-called modules as provided for in the concept of the Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety (BMU). So far, there has not been a nuclear plant safety ordinance. The Atomic Energy Act has always provided a basis for adopting such an ordinance, especially so in Sec.12 I 1 No.1, Atomic Energy Act. No federal government has so far wanted to make use of it. This makes it all the more remarkable that the BMU took up the subject of a nuclear plant safety ordinance as early as in 2006, starting a dialog with the federal states. This dialog meanwhile has come to a halt. The subject seems to be dormant right now, but certainly has not been shelved. Ensuring plant safety is a key purpose of nuclear law. Sec.7 II No.3, Atomic Energy Act, is considered the basic norm of nuclear legislation. The main requirement this embodies is ensuring 'the provisions against damage arising from construction and operation of a plant as required in accordance with the state of the art'. These normative requirements constitute the strictest yardstick existing in legislation about technology. Putting it into effect has always been the purpose of the set of nuclear rules and regulations constituting the next lower level of legislation, which so far have developed by evolution and are now to be

PNRA: Practically Improving Safety Culture within the Regulatory Body

International Nuclear Information System (INIS)

Bhatti, S.A.N.; Habib, M.A.

2016-01-01

were carried out in order to prepare the organization for the cultural assessment activity. After completion of safety culture self assessment at PNRA, the communication strategy was defined to share outcome of this assessment in the organization with the focus on developing dialogue and shared understanding. The safety culture improvement activities were designed to maintain and enhance strong areas of safety culture at PNRA and to address those areas that need attention in order to enhance safety consciousness. This paper presents PNRA’s experience of using IAEA emerging methodology for safety culture self assessment, challenges faced during the process and lessons learnt for further improvement in order to implement it more effectively in future. The paper also highlights strategy utilised for conveying outcomes of SCSA in the organization at different levels along with safety culture improvement activities. (author)

Nuclear safety improvement activities related to WWER-440 units in Bulgaria

International Nuclear Information System (INIS)

Gantchev, T.

1998-01-01

The systematic evaluation of the deficiencies of the original design of the WWER reactors brought to the development of a Short Term Programme for Safety Upgrading and Modernisation of Kozloduy WWER-440 units. The implementation of this Programme was completed in 1997. The strive for continuos improvement of Kozloduy Nuclear Power Plant (NPP) safety level, the new requirements of the Bulgarian Nuclear Safety Authority and the public concern initiated the development of new Complex Programme for Safety Improvement (PRG'97), now in a process of implementation. (author)

Driving forces behind the Chinese public's demand for improved environmental safety.

Science.gov (United States)

Wen, Ting; Wang, Jigan; Ma, Zongwei; Bi, Jun

2017-12-15

Over the past decades, the public demand for improved environmental safety keeps increasing in China. This study aims to assess the driving forces behind the increasing public demand for improved environmental safety using a provincial and multi-year (1995, 2000, 2005, 2010, and 2014) panel data and the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model. The potential driving forces investigated included population size, income levels, degrees of urbanization, and educational levels. Results show that population size and educational level are positively (Pdemand for improved environmental safety. No significant impact on demand was found due to the degree of urbanization. For the impact due to income level, an inverted U-shaped curve effect with the turning point of ~140,000 CNY GDP per capita is indicated. Since per capita GDP of 2015 in China was approximately 50,000 CNY and far from the turning point, the public demand for improved environmental safety will continue rising in the near future. To meet the increasing public demand for improved environmental safety, proactive and risk prevention based environmental management systems coupled with effective environmental risk communication should be established. Copyright © 2017 Elsevier B.V. All rights reserved.

A Scholarly Pathway in Quality Improvement and Patient Safety.

Science.gov (United States)

Ferguson, Catherine C; Lamb, Geoffrey

2015-10-01

There are several challenges to teaching quality improvement (QI) and patient safety material to medical students, as successful programs should combine didactic and experiential teaching methods, integrate the material into the preclinical and clinical years, and tailor the material to the schools' existing curriculum. The authors describe the development, implementation, and assessment of the Quality Improvement and Patient Safety (QuIPS) Scholarly Pathway-a faculty-mentored, three-year experience for students interested in gaining exposure to QI and patient safety concepts at the Medical College of Wisconsin (MCW). The QuIPS pathway capitalized on the existing structure of scholarly pathways for MCW medical students, allowing QI and patient safety to be incorporated into the existing curriculum using didactic and experiential instruction and spanning preclinical and clinical education. Student reaction to the QuIPS pathway has been favorable. Preliminary data demonstrate that student knowledge as measured by the Quality Improvement Knowledge Assessment Tool significantly increased after the first year of implementation. A novel curriculum such as the QuIPS pathway provides an important opportunity to develop and test new assessment tools for curricula in systems-based practice and practice-based learning and improvement. The authors also hope that by bringing together local QI and patient safety experts and stakeholders during the curricular development process, they have laid the groundwork for the creation of a more pervasive curriculum that will reach all MCW students in the future. The model may be generalizable to other U.S. medical schools with scholarly pathways as well.

Overlapping Nuclear Safety Control Provisions of the Atomic Energy Act and Electric Utility Act

International Nuclear Information System (INIS)

Chang, Gun-Hyun; Kim, Sang-Won; Koh, Jae-Dong; Ahn, Hyung-Joon; Kim, Chang-Bum

2007-01-01

Before May 17, 2005, Korea's nuclear power plant (hereinafter referred to as 'NNP') regulation system was two-pronged. Every NPP system consists of primary or secondary system, and each type was respectively regulated by the Atomic Energy Act(hereinafter referred to as 'AEA') and the Electric Utility Act(hereinafter referred to as 'EUA'). This unusual regulatory regime gave rise to a number of problems with respect to operation and safety. For this reason, the Enforcement Regulation of AEA and applicable Notice were revised on May 17, 2005 to the effect that all regulation on NPPs subject to EUA was brought under the purview of AEA, except regulation on business license for nuclear power generation under Article 7 of EUA and approval of plan of works for setting up electric installations (hereinafter referred to as 'construction plan') (including approval of any changes; the same shall apply hereinafter) under Article 61 thereof. From the point of view of the Ministry of Science and Technology, the regulation of NPPs by a single law has enhanced their safety. However, the Ministry of Commerce, Industry and Energy retains regulatory authority regarding NPPs. It reviews and approves construction plans for secondary system pursuant to Article 61 of EUA and Article 28 of the Enforcement Regulation thereof. This situation arose because Article 28 of the Enforcement Regulation of EUA continues to provide for matters related with nuclear power. Therefore, continued control of NPPs under EUA ignores the relationship and respective nature of AEA and EUA. There is also possibility of violation of a superseding law. Even if said provision is not in violation of a superseding law, Article 28 of the Enforcement Regulation of EUA poses the possibility of overlapping regulation, which may violate the principle of prohibiting excessive regulation, one of the principles of the Korean Constitution. Assessment of the dual regulatory system for review of secondary system requires (i

Improving patient safety in radiation oncology

International Nuclear Information System (INIS)

Hendee, William R.; Herman, Michael G.

2011-01-01

Beginning in the 1990s, and emphasized in 2000 with the release of an Institute of Medicine report, healthcare providers and institutions have dedicated time and resources to reducing errors that impact the safety and well-being of patients. But in January 2010 the first of a series of articles appeared in the New York Times that described errors in radiation oncology that grievously impacted patients. In response, the American Association of Physicists in Medicine and the American Society of Radiation Oncology sponsored a working meeting entitled ''Safety in Radiation Therapy: A Call to Action''. The meeting attracted 400 attendees, including medical physicists, radiation oncologists, medical dosimetrists, radiation therapists, hospital administrators, regulators, and representatives of equipment manufacturers. The meeting was cohosted by 14 organizations in the United States and Canada. The meeting yielded 20 recommendations that provide a pathway to reducing errors and improving patient safety in radiation therapy facilities everywhere.

Improved obstetric safety through programmatic collaboration.

Science.gov (United States)

Goffman, Dena; Brodman, Michael; Friedman, Arnold J; Minkoff, Howard; Merkatz, Irwin R

2014-01-01

Healthcare safety and quality are critically important issues in obstetrics, and society, healthcare providers, patients and insurers share a common goal of working toward safer practice, and are continuously seeking strategies to facilitate improvements. To this end, 4 New York City voluntary hospitals with large maternity services initiated a unique collaborative quality improvement program. It was facilitated by their common risk management advisors, FOJP Service Corporation, and their professional liability insurer, Hospitals Insurance Company. Under the guidance of 4 obstetrics and gynecology departmental chairmen, consensus best practices for obstetrics were developed which included: implementation of evidence based protocols with audit and feedback; standardized educational interventions; mandatory electronic fetal monitoring training; and enhanced in-house physician coverage. Each institution developed unique safety related expertise (development of electronic documentation, team training, and simulation education), and experiences were shared across the collaborative. The collaborative group developed robust systems for audit of outcomes and documentation quality, as well as enforcement mechanisms. Ongoing feedback to providers served as a key component of the intervention. The liability carrier provided financial support for these patient safety innovations. As a result of the interventions, the overall AOI for our institutions decreased 42% from baseline (January-June 2008) to the most recently reviewed time period (July-December 2011) (10.7% vs 6.2%, p Risk Management of the American Hospital Association.

Transportation Safety Excellence in Operations Through Improved Transportation Safety Document

International Nuclear Information System (INIS)

Dr. Michael A. Lehto; MAL

2007-01-01

A recent accomplishment of the Idaho National Laboratory (INL) Materials and Fuels Complex (MFC) Nuclear Safety analysis group was to obtain DOE-ID approval for the inter-facility transfer of greater-than-Hazard-Category-3 quantity radioactive/fissionable waste in Department of Transportation (DOT) Type A drums at MFC. This accomplishment supported excellence in operations through safety analysis by better integrating nuclear safety requirements with waste requirements in the Transportation Safety Document (TSD); reducing container and transport costs; and making facility operations more efficient. The MFC TSD governs and controls the inter-facility transfer of greater-than-Hazard-Category-3 radioactive and/or fissionable materials in non-DOT approved containers. Previously, the TSD did not include the capability to transfer payloads of greater-than-Hazard-Category-3 radioactive and/or fissionable materials using DOT Type A drums. Previous practice was to package the waste materials to less-than-Hazard-Category-3 quantities when loading DOT Type A drums for transfer out of facilities to reduce facility waste accumulations. This practice allowed operations to proceed, but resulted in drums being loaded to less than the Waste Isolation Pilot Plant (WIPP) waste acceptance criteria (WAC) waste limits, which was not cost effective or operations friendly. An improved and revised safety analysis was used to gain DOE-ID approval for adding this container configuration to the MFC TSD safety basis. In the process of obtaining approval of the revised safety basis, safety analysis practices were used effectively to directly support excellence in operations. Several factors contributed to the success of MFC's effort to obtain approval for the use of DOT Type A drums, including two practices that could help in future safety basis changes at other facilities. (1) The process of incorporating the DOT Type A drums into the TSD at MFC helped to better integrate nuclear safety

Speech Recognition Interfaces Improve Flight Safety

Science.gov (United States)

2013-01-01

"Alpha, Golf, November, Echo, Zulu." "Sierra, Alpha, Golf, Echo, Sierra." "Lima, Hotel, Yankee." It looks like some strange word game, but the combinations of words above actually communicate the first three points of a flight plan from Albany, New York to Florence, South Carolina. Spoken by air traffic controllers and pilots, the aviation industry s standard International Civil Aviation Organization phonetic alphabet uses words to represent letters. The first letter of each word in the series is combined to spell waypoints, or reference points, used in flight navigation. The first waypoint above is AGNEZ (alpha for A, golf for G, etc.). The second is SAGES, and the third is LHY. For pilots of general aviation aircraft, the traditional method of entering the letters of each waypoint into a GPS device is a time-consuming process. For each of the 16 waypoints required for the complete flight plan from Albany to Florence, the pilot uses a knob to scroll through each letter of the alphabet. It takes approximately 5 minutes of the pilot s focused attention to complete this particular plan. Entering such a long flight plan into a GPS can pose a safety hazard because it can take the pilot s attention from other critical tasks like scanning gauges or avoiding other aircraft. For more than five decades, NASA has supported research and development in aviation safety, including through its Vehicle Systems Safety Technology (VSST) program, which works to advance safer and more capable flight decks (cockpits) in aircraft. Randy Bailey, a lead aerospace engineer in the VSST program at Langley Research Center, says the technology in cockpits is directly related to flight safety. For example, "GPS navigation systems are wonderful as far as improving a pilot s ability to navigate, but if you can find ways to reduce the draw of the pilot s attention into the cockpit while using the GPS, it could potentially improve safety," he says.

More safety by improving the safety culture

International Nuclear Information System (INIS)

Laaksonen, J.

1993-01-01

In its meeting in 1986, after Chernobyl accident, the INSAG group concluded, that the most important reason for the accident was lack of safety culture. Later the group realized that the safety culture, if it is well enough, can be used as a powerful tool to assess and develop practices affecting safety in any country. A comprehensive view on the various aspects of safety culture was presented in the INSAG-4 report published in 1991. Finland was among the first nations include the concept of safety culture in its regulations. This article describes the roles of government and the regulatory body in creating a national safety culture. How safety culture is seen in the operation of a nuclear power plant is also discussed. (orig.)

Proposal for the improvement of IRD safety culture based on risk analysis

International Nuclear Information System (INIS)

Aguiar, L.A.; Ferreira, P.R.R.; Silveira, C.S.

2017-01-01

The Safety Culture (SC) is a concept about the relationship of individuals and organizations towards the safety in a specific activity. Any organization that carries out activities with risks has a SC, even at minimum levels. People perceive different types of radiation risks in very different ways, therefore, to identify and to analysis of the possible radiation risks resulting from normal operation or accident conditions is an important issue in order to improve the SC in organization. The main is to present guidelines for the improvement of the safety culture in the Institute of Radiation Protection and Dosimetry - IRD through on risk-based approach. The methodology proposed here is: A) select a division of the IRD for case study; B) assess the level of the 10 culture safety basic elements of the IRD division selected; C) conduct a survey of the hazards and risks associated with the various activities developed by the division; D) reassess the level of the 10 basic elements of CS; And E) analyze the results and correlate the impact of risk knowledge on safety culture improvement. The expected result is improvement the safety and of safety culture by understanding of radiation risks and hazards relating to work and to the working environment; and thus enforce a collective commitment to safety by teams and individuals and raise the safety culture to higher levels. (author)

Proposal for the improvement of IRD safety culture based on risk analysis

Energy Technology Data Exchange (ETDEWEB)

Aguiar, L.A.; Ferreira, P.R.R. [Instituto de Radioproteção e Dosimetria (DIRAD/IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Silveira, C.S., E-mail: laguiar@ird.gov.br [Comissão Nacional de Energia Nuclear (DRS/CGMI/CNEN), Rio de Janeiro, RJ (Brazil)

2017-07-01

The Safety Culture (SC) is a concept about the relationship of individuals and organizations towards the safety in a specific activity. Any organization that carries out activities with risks has a SC, even at minimum levels. People perceive different types of radiation risks in very different ways, therefore, to identify and to analysis of the possible radiation risks resulting from normal operation or accident conditions is an important issue in order to improve the SC in organization. The main is to present guidelines for the improvement of the safety culture in the Institute of Radiation Protection and Dosimetry - IRD through on risk-based approach. The methodology proposed here is: A) select a division of the IRD for case study; B) assess the level of the 10 culture safety basic elements of the IRD division selected; C) conduct a survey of the hazards and risks associated with the various activities developed by the division; D) reassess the level of the 10 basic elements of CS; And E) analyze the results and correlate the impact of risk knowledge on safety culture improvement. The expected result is improvement the safety and of safety culture by understanding of radiation risks and hazards relating to work and to the working environment; and thus enforce a collective commitment to safety by teams and individuals and raise the safety culture to higher levels. (author)

What should the Price--Anderson Act accomplish

International Nuclear Information System (INIS)

Kane, G.L.

1977-01-01

A historical review of the Price-Anderson Act's goals is followed by recommendations for amendments to improve guarantees of public safety. Failures of the original Act are identified as its failure to cover some accident situations appropriately and to provide incentives for promoting public safety. Legislation should correct these problems and be extended to all energy areas. Legislation based on worst-case situations is not found to be meaningful in terms of increasing safety or estimating comprehensive compensation because it relies on invalidated assumptions, which are still useful in safety awareness. Legislation could take the direction of putting 1.5 percent of the reactor cost into a fund, with the vendor and licensee contributing equal parts. When an incident occurs at any reactor, another one percent is put in by every reactor plus a $1 million penalty proportioned among those responsible. The Federal government would cover amounts above the fund, which would have no limit. Compensation to public funds by the industry would be a social decision based on the social and economic impact

Direct-acting antiviral agent efficacy and safety in renal transplant recipients with chronic hepatitis C virus infection

OpenAIRE

Chen, Keliang; Lu, Pei; Song, Rijin; Zhang, Jiexiu; Tao, Rongzhen; Wang, Zijie; Zhang, Wei; Gu, Min

2017-01-01

Abstract Background: The efficacy and safety of direct-acting antivirals (DAAs) for treating hepatitis C virus (HCV)-infected renal transplant recipients (RTRs) has not been determined. Methods: We searched PubMed, Embase, and the Cochrane Central Register of Controlled Trials and assessed the quality of eligible studies using the Joanna Briggs Institute scale. DAA efficacy and safety were assessed using standard mean difference (SMD) with 95% confidence intervals (95%CIs). Results: Six studi...

Advanced power reactors with improved safety characteristics

International Nuclear Information System (INIS)

Birkhofer, A.

1994-01-01

The primary objective of nuclear safety is the protection of individuals, society and environment against radiological hazards from accidental releases of radioactive materials contained in nuclear reactors. Hereto, these materials are enclosed by several successive barriers and the barriers protected against mishaps and accidents by a multi-level system of safety precautions. The evolution of reactor technology continuously improves this concept and its implementation. At a world-wide scale, several advanced reactor concepts are currently being considered, some of them already at a design stage. Essential safety objectives include both further strengthening the prevention of accidents and improving the containment of fission products should an accident occur. The proposed solutions differ considerably with regard to technical principles, plant size and time scales considered for industrial application. Two typical approaches can be distinguished: The first approach basically aims at an evolution of power reactors currently in use, taking into account the findings from safety research and from operation of current plants. This approach makes maximum use of proven technology and operating experience but may nevertheless include new safety features. The corresponding designs are often termed 'large evolutionary'. The second approach consists in more fundamental changes compared to present designs, often with strong emphasis on specific passive features protecting the fuel and fuel cladding barriers. Owing to the nature and capability of those passive features such 'innovative designs' are mostly smaller in power output. The paper describes the basic objectives of such developments and illustrates important technical concepts focusing on next generation plants, i.e. designs to be available for industrial application until the end of this decade. 1 tab. (author)

Measurable improvement in patient safety culture: A departmental experience with incident learning.

Science.gov (United States)

Kusano, Aaron S; Nyflot, Matthew J; Zeng, Jing; Sponseller, Patricia A; Ermoian, Ralph; Jordan, Loucille; Carlson, Joshua; Novak, Avrey; Kane, Gabrielle; Ford, Eric C

2015-01-01

Rigorous use of departmental incident learning is integral to improving patient safety and quality of care. The goal of this study was to quantify the impact of a high-volume, departmental incident learning system on patient safety culture. A prospective, voluntary, electronic incident learning system was implemented in February 2012 with the intent of tracking near-miss/no-harm incidents. All incident reports were reviewed weekly by a multiprofessional team with regular department-wide feedback. Patient safety culture was measured at baseline with validated patient safety culture survey questions. A repeat survey was conducted after 1 and 2 years of departmental incident learning. Proportional changes were compared by χ(2) or Fisher exact test, where appropriate. Between 2012 and 2014, a total of 1897 error/near-miss incidents were reported, representing an average of 1 near-miss report per patient treated. Reports were filed by a cross section of staff, with the majority of incidents reported by therapists, dosimetrists, and physicists. Survey response rates at baseline and 1 and 2 years were 78%, 80%, and 80%, respectively. Statistically significant and sustained improvements were noted in several safety metrics, including belief that the department was openly discussing ways to improve safety, the sense that reports were being used for safety improvement, and the sense that changes were being evaluated for effectiveness. None of the surveyed dimensions of patient safety culture worsened. Fewer punitive concerns were noted, with statistically significant decreases in the worry of embarrassment in front of colleagues and fear of getting colleagues in trouble. A comprehensive incident learning system can identify many areas for improvement and is associated with significant and sustained improvements in patient safety culture. These data provide valuable guidance as incident learning systems become more widely used in radiation oncology. Copyright © 2015

[Acceptance and commitment therapy (ACT) and improving chess performance in promising young chess-players].

Science.gov (United States)

Ruiz, Francisco J; Luciano, Carmen

2009-08-01

Acceptance and Commitment Therapy (ACT) is shown to be effective in relatively distant fields from the so-called psychological disorders. One of these areas is sport performance improvement. The aim of the current study is to expand the application of brief ACT protocols to improve chess-players' performance. In a previous study, a brief protocol was applied to international-level adult chess-players that was effective. The current study aims to apply an equivalent brief ACT protocol, but in this case, applied in a group format to promising young chess-players. In addition, this brief protocol is compared to a non-intervention control condition. Results show that the ACT brief protocol improved the performance in 5 out of 7 participants, and that none of the chess-players in the control condition reached the established change criterion. The differences between the conditions in chess performance were statistically significant. The results are discussed, emphasizing the replicated impact of a brief ACT protocol on the improvement of chess-players' performance.

Characterization and improvement of the nuclear safety culture through self-assessment

International Nuclear Information System (INIS)

Levin, H.A.; McGehee, R.B.; Cottle, W.T.

1996-01-01

Organizational culture has a powerful influence on overall corporate performance. The ability to sustain superior results in ensuring the public's health and safety is predicated on an organization's deeply embedded values and behavioral norms and how these affect the ability to change and seek continuous improvement. The nuclear industry is developing increased recognition of the relationship of culture to nuclear safety performance as a critical element of corporate strategy. This paper describes a self-assessment methodology designed to characterize and improve the nuclear safety culture, including processes for addressing employee concerns. This methodology has been successfully applied on more than 30 occasions in the last several years, resulting in measurable improvements in safety performance and quality and employee motivation, productivity, and morale. Benefits and lessons learned are also presented

Improving health care quality and safety: the role of collective learning

Directory of Open Access Journals (Sweden)

Singer SJ

2015-11-01

Full Text Available Sara J Singer,1–4 Justin K Benzer,4–6 Sami U Hamdan4,6 1Department of Health Policy and Management, Harvard T.H. Chan School of Public Health, Boston, MA, USA; 2Department of Medicine, Harvard Medical School, Boston, MA, USA; 3Mongan Institute for Health Policy, Massachusetts General Hospital, Boston, MA, USA; 4Center for Healthcare Organization and Implementation Research, VA Boston Healthcare System, Boston, MA, USA; 5VISN 17 Center of Excellence for Research on Returning War Veterans, Waco, TX, USA; 6Department of Health Policy and Management, Boston University School of Public Health, Boston, MA, USA Abstract: Despite decades of effort to improve quality and safety in health care, this goal feels increasingly elusive. Successful examples of improvement are infrequently replicated. This scoping review synthesizes 76 empirical or conceptual studies (out of 1208 originally screened addressing learning in quality or safety improvement, that were published in selected health care and management journals between January 2000 and December 2014 to deepen understanding of the role that collective learning plays in quality and safety improvement. We categorize learning activities using a theoretical model that shows how leadership and environmental factors support collective learning processes and practices, and in turn team and organizational improvement outcomes. By focusing on quality and safety improvement, our review elaborates the premise of learning theory that leadership, environment, and processes combine to create conditions that promote learning. Specifically, we found that learning for quality and safety improvement includes experimentation (including deliberate experimentation, improvisation, learning from failures, exploration, and exploitation, internal and external knowledge acquisition, performance monitoring and comparison, and training. Supportive learning environments are characterized by team characteristics like psychological

Intelligent Information Processing for Enhanced Safety in the NAS, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose a system that focuses on how improved information flow between agents acting in a flight deck environment can improve safety performance. Agents are...

76 FR 67456 - Common Formats for Patient Safety Data Collection and Event Reporting

Science.gov (United States)

2011-11-01

... information regarding the quality and safety of health care delivery. The Patient Safety Act (at 42 U.S.C... Formats in order to facilitate standardized data collection and improve the safety and quality of health... conjunction with an interagency Federal Patient Safety Work Group (PSWG), revises and refines the Common...

Patient Safety Based Knowledge Management SECI to Improve Nusrsing Students Competency

Directory of Open Access Journals (Sweden)

Joanggi Wiriatarina Harianto

2015-10-01

Full Text Available Introduction: Patient safety is an important component of health services quality,and  basic principles of patient care. Nursing students also have a great potential to make an action that could endanger the patient, because hospital is one of student practice area. The purpose of this study was to improve the nursing students competency in patient safety by using knowledge management SECI approached. Method: The study used exploratory survey, and quasy experiment. The samples were some of nursing students of STIKes Muhammadiyah Samarinda who were on internship programme that selected using simple random sampling technique, in total of 54 students. This research’s variables were the knowledge management SECI based-patient safety and nursing student’s competency. The data were collected by using questionnaires and observation. The data were analyze by using Partial Least Square (PLS. Result: The result showed that there were significant influence the implementation of a model patient safety based knowledge management seci on increased competence nursing students. Discussion: Improved student competency in patient safety using SECI knowledge management was carried out in four phases, that is Socialization, Externalization, Combination, and Internalization. The result was a new knowledge related to patient safety that able to improve the student’s competency.. Keywords: Patient safety, Knowledge management, SECI, competency

Statutory Instrument No. 1439 (C.26) The Health and Safety at Work etc. Act 1974 (Commencement No.1) Order 1974

International Nuclear Information System (INIS)

1974-01-01

This Order brings into operation progressively Parts I, II and IV of the Safety at Work etc. Act of 31 July 1974. Certain provisions entered into force as from 1 October 1974 and the remainder as from 1 April 1974; the provisions respectively relate to the establishment and functions of the Health and Safety Commission, the Health and Safety Executive and the general duties of employers. (NEA) [fr

Improving patient safety: patient-focused, high-reliability team training.

Science.gov (United States)

McKeon, Leslie M; Cunningham, Patricia D; Oswaks, Jill S Detty

2009-01-01

Healthcare systems are recognizing "human factor" flaws that result in adverse outcomes. Nurses work around system failures, although increasing healthcare complexity makes this harder to do without risk of error. Aviation and military organizations achieve ultrasafe outcomes through high-reliability practice. We describe how reliability principles were used to teach nurses to improve patient safety at the front line of care. Outcomes include safety-oriented, teamwork communication competency; reflections on safety culture and clinical leadership are discussed.

International conference on the strengthening of nuclear safety in Eastern Europe. Keynote papers. Regulatory aspects of NPP safety, status of safety improvements, status of safety analysis report

International Nuclear Information System (INIS)

1999-06-01

The Objective of the Conference was to assess the past decade of nuclear safety efforts in countries operating WWER and RBMK nuclear reactors and to address remaining safety issues which require further work. A particular focus of the Conference was on international co-operation and assistance and where such efforts should be focused in the future. All Eastern European countries that operate RBMK or WWER reactors participated in the Conference, and presented papers on three key areas of nuclear safety: Regulatory Aspects of Nuclear Power Plant Safety; Status of Safety Improvements; and Status of Safety Analysis Reports. In addition, representatives from 18 additional countries that provide financial and/or technical assistance and co-operation in the area of WWER and RBMK safety offered the most extensive commentary. Key international (IAEA, World Association of Nuclear Operators, the Nuclear Energy Agency, the G-24 NUSAC, the European Commission, and the EBRD) organizations that provide nuclear safety assistance for WWER and RBMK reactors also made presentations. There is no question that considerable progress on nuclear safety has been made in Eastern Europe. Special mention should be made of successful efforts to strengthen the independence and technical competence of the nuclear regulatory authorities. Efforts should now concentrate on improving the depth and scope of the technical abilities of the regulatory authorities. More attention by governments is needed to ensure that the regulatory authorities have the financial resources and enforcement authority to fully execute their missions. In respect to the operators of the nuclear power plants, they have demonstrated clear progress in operational safety improvements. Significant additional efforts are required to maintain and enhance an effective safety culture. Design safety improvement programmes are in place in all countries. Implementation of these programmes has varied and is particularly affected by

The House of Commons of Canada, Bill C-23 : An act to establish the Canadian Nuclear Safety Commission and to make consequential amendments to other acts

International Nuclear Information System (INIS)

1996-01-01

This enactment replaces the Atomic Energy Control Act with a modern statute to provide for more explicit and effective regulation of nuclear energy. While the existing Act encompasses both the regulatory and developmental aspects of nuclear activities, this enactment disconnects the two functions and provides a distinct identity to the regulatory agency. It replaces the Atomic Energy Control Board with the Canadian Nuclear Safety Commission, underlining its separate role from that of Atomic Energy of Canada Ltd., the federal research, development and marketing organization for nuclear energy

Effect of generic issues program on improving safety

International Nuclear Information System (INIS)

Fard, M. R.; Kauffman, J. V.

2010-01-01

The U.S. Nuclear Regulatory Commission (NRC) identifies (by its assessment of plant operation) certain issues involving public health and safety, the common defense and security, or the environment that could affect multiple entities under NRC jurisdiction. The Generic Issues Program (GIP) addresses the resolution of these Generic Issues (GIs). The resolution of these issues may involve new or revised rules, new or revised guidance, or revised interpretation of rules or guidance that affect nuclear power plant licensees, nuclear material certificate holders, or holders of other regulatory approvals. U.S. NRC provides information related to the past and ongoing GIP activities to the general public by the use of three main resources, namely NUREG-0933, 'Resolution of Generic Safety Issues, ' Generic Issues Management Control System (GIMCS), and GIP public web page. GIP information resources provide information such as historical information on resolved GIs, current status of the open GIs, policy documents, program procedures, GIP annual and quarterly reports and the process to contact GIP and propose a GI This paper provides an overview of the GIP and several examples of safety improvements resulting from the resolution of GIs. In addition, the paper provides a brief discussion of a few recent GIs to illustrate how the program functions to improve safety. (authors)

The Power of Collaboration for Improving Safety in Complex Systems

International Nuclear Information System (INIS)

Hart, C. A.

2016-01-01

Many potentially hazardous industries involve systems that consist of a complex array of subsystems that must work together effectively in order for the entire system to perform. Often the subsystems are coupled, such that changes in any one subsystem can affect other subsystems. “System Think” refers to an awareness of the impacts throughout a system of changes in any subsystem. The U.S. commercial aviation industry, in its continuing endeavor to improve safety, uses a collaborative approach to accomplish System Think— bringing all of the key parts of the industry together to work in a collaborative manner to identify and address potential safety concerns. The collaborative approach resulted in an 83% reduction in the fatal accident rate in only 10 years. It also demonstrated that, contrary to conventional wisdom that safety improvements usually hurt productivity, safety improvements that result from a collaborative approach can simultaneously improve productivity. Last but not least, it minimised one of the continuing challenges of making changes in complex systems, which is unintended consequences. The purpose of this presentation is to describe the collaborative approach and to discuss its transferability to other potentially hazardous industries that are seeking to manage their risks more efficiently and effectively. (author)

The Implementation of the Food Safety Modernization Act and the Strength of the Sustainable Agriculture Movement.

Science.gov (United States)

Wiseman, Samuel R

2015-01-01

In the wake of growing public concerns over salmonella outbreaks and other highly publicized food safety issues, Congress passed the FDA Food Safety Modernization Act in 2011, which placed more stringent standards on food growing and packaging operations. In negotiations preceding the Act's passage, farmers of local, sustainable food argued that these rules would unduly burden local agricultural operations or, at the extreme, drive them out of business by creating overly burdensome rules. These objections culminated in the addition of the Tester-Hagan Amendment to the Food Safety Modernization Act, which created certain exemptions for small farms. Proposed Food and Drug Administration (FDA) rules to implement the Act threatened to weaken this victory for small farm groups, however, prompting a loud response from small farmers and local food proponents. The FDA's second set of proposed rules, issued in September 2014 in response to these and other complaints, were, perhaps surprisingly, responsive to small farmers' concerns. Using comments submitted to the FDA, this article explores the responses of the agriculture industry and public health organizations, as well as small farm groups, consumers of local food, and sustainable agriculture interests (which, for simplicity, I alternately describe as comprising the "sustainable agriculture" or "small farm" movement), to three aspects of the FDA's proposed rules--involving manure application, on-farm packing activities, and exemptions for very small farms--to assess the strength of the sustainable agriculture movement. The rules involving manure application and on-farm packing, it turns out, reveal little about the independent political strength of the local food movement, as large industry groups also objected to these provisions. But for the third issue discussed here--exemptions for very small farms--the interests of sustainable agriculture groups were directly opposed to both industry and public health organizations

78 FR 68782 - Public Meeting on the Improve Tracking of Workplace Injuries and Illnesses Proposed Rule

Science.gov (United States)

2013-11-15

... is to improve workplace safety and health through the collection of useful, accessible, establishment.... Public Participation Recordkeeping requirements promulgated under the Occupational Safety and Health Act...., Washington, DC 20210. It is issued under Sections 8 and 24 of the Occupational Safety and Health Act (29 U.S...

Assistance of Foreign Countries and International Organizations to Support Safety Improvements at Ignalina NPP

International Nuclear Information System (INIS)

Shevaldin, V.

1997-01-01

International cooperation and assistance for the improving safety of Ignalina NPP is described. Sweden was among the first countries which supported safety improvements at Ignalina NPP. The first project in the cooperation was BARSELINA, Probabilistic Safety Analysis of Ignalina NPP. The cooperation is still bringing significant support to the plant, including improvements in the fire protection, communications system, physical protection, and many other areas. Another one very important source of assistance was Nuclear Safety Account, administered by the EBRD. In 1993 experts of the plant, together with representatives of VATESI and SKI (Sweden) have worked out a short-term safety improvement program SIP-1, which was financed by the EBRD . Eighteen safety related projects were selected, expensive and reliable equipment was procured and installed

Patient safety improvement programmes for primary care. Review of a Delphi procedure and pilot studies by the LINNEAUS collaboration on patient safety in primary care

Science.gov (United States)

Verstappen, Wim; Gaal, Sander; Esmail, Aneez; Wensing, Michel

2015-01-01

ABSTRACT Background: To improve patient safety it is necessary to identify the causes of patient safety incidents, devise solutions and measure the (cost-) effectiveness of improvement efforts. Objective: This paper provides a broad overview with practical guidance on how to improve patient safety. Methods: We used modified online Delphi procedures to reach consensus on methods to improve patient safety and to identify important features of patient safety management in primary care. Two pilot studies were carried out to assess the value of prospective risk analysis (PRA), as a means of identifying the causes of a patient safety incident. Results: A range of different methods can be used to improve patient safety but they have to be contextually specific. Practice organization, culture, diagnostic errors and medication safety were found to be important domains for further improvement. Improvement strategies for patient safety could benefit from insights gained from research on implementation of evidence-based practice. Patient involvement and prospective risk analysis are two promising and innovative strategies for improving patient safety in primary care. Conclusion: A range of methods is available to improve patient safety, but there is no ‘magic bullet.’ Besides better use of the available methods, it is important to use new and potentially more effective strategies, such as prospective risk analysis. PMID:26339837

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Does Employee Safety Matter for Patients Too? Employee Safety Climate and Patient Safety Culture in Health Care.

Science.gov (United States)

Mohr, David C; Eaton, Jennifer Lipkowitz; McPhaul, Kathleen M; Hodgson, Michael J

2015-04-22

We examined relationships between employee safety climate and patient safety culture. Because employee safety may be a precondition for the development of patient safety, we hypothesized that employee safety culture would be strongly and positively related to patient safety culture. An employee safety climate survey was administered in 2010 and assessed employees' views and experiences of safety for employees. The patient safety survey administered in 2011 assessed the safety culture for patients. We performed Pearson correlations and multiple regression analysis to examine the relationships between a composite measure of employee safety with subdimensions of patient safety culture. The regression models controlled for size, geographic characteristics, and teaching affiliation. Analyses were conducted at the group level using data from 132 medical centers. Higher employee safety climate composite scores were positively associated with all 9 patient safety culture measures examined. Standardized multivariate regression coefficients ranged from 0.44 to 0.64. Medical facilities where staff have more positive perceptions of health care workplace safety climate tended to have more positive assessments of patient safety culture. This suggests that patient safety culture and employee safety climate could be mutually reinforcing, such that investments and improvements in one domain positively impacts the other. Further research is needed to better understand the nexus between health care employee and patient safety to generalize and act upon findings.

[An approach to care indicators benchmarking. Learning to improve patient safety].

Science.gov (United States)

de Andrés Gimeno, B; Salazar de la Guerra, R M; Ferrer Arnedo, C; Revuelta Zamorano, M; Ayuso Murillo, D; González Soria, J

2014-01-01

Improvements in clinical safety can be achieved by promoting a safety culture, professional training, and learning through benchmarking. The aim of this study was to identify areas for improvement after analysing the safety indicators in two public Hospitals in North-West Madrid Region. Descriptive study performed during 2011 in Hospital Universitario Puerta de Hierro Majadahonda (HUPHM) and Hospital de Guadarrama (HG). The variables under study were 40 indicators on nursing care related to patient safety. Nineteen of them were defined in the SENECA project as care quality standards in order to improve patient safety in the hospitals. The data collected were clinical history, Madrid Health Service assessment reports, care procedures, and direct observation Within the 40 indicators: 22 of them were structured (procedures), HUPHM had 86%, and HG 95% 14 process indicators (training and protocols compliance) with similar results in both hospitals, apart from the care continuity reports and training in hand hygiene. The 4 results indicators (pressure ulcer, falls and pain) showed different results. The analysis of the indicators allowed the following actions to be taken: to identify improvements to be made in each hospital, to develop joint safety recommendations in nursing care protocols in prevention and treatment of chronic wound, to establish systematic pain assessments, and to prepare continuity care reports on all patients transferred from HUPHM to HG. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

Slovak Republic Act No. 124/2006 Coll. of 2 February 2006 on safety and health at work and amending some laws

International Nuclear Information System (INIS)

2006-01-01

This Act establishes the general principles of prevention and basic conditions for ensuring safety and health at work and to eliminate the risk factors and conditioning the occurrence of occupational accidents, occupational diseases and other health damage. This Act came into force on July 1, 2006.

Occurrence of lead-related symptoms below the current occupational safety and health act allowable blood lead levels.

Science.gov (United States)

Rosenman, Kenneth D; Sims, Amy; Luo, Zhehui; Gardiner, Joseph

2003-05-01

To determine the occurrence of symptoms of lead toxicity at levels below the current allowable Occupational Safety and Health Act blood lead level of 50 micrograms/dL, standardized telephone interviews were conducted of individuals reported to a statewide laboratory-based surveillance system. Four hundred and ninety-seven, or 75%, of the eligible participants were interviewed. Gastrointestinal, musculoskeletal, and nervous system symptoms increased with increasing blood lead levels. Nervous, gastrointestinal, and musculoskeletal symptoms all began to be increased in individuals with blood leads between 30-39 micrograms/dL and possibly at levels as low as 25-30 micrograms/dL for nervous system symptoms. The results of this study of increased symptoms are consistent with and provide added weight to previous results showing subclinical changes in the neurologic and renal systems and sperm counts at blood lead levels currently allowed by the Occupational Safety and Health Act.

Improved safety at CERN

CERN Multimedia

2006-01-01

As announced in Weekly Bulletin No. 43/2006, a new approach to the implementation of Safety at CERN has been decided, which required taking some managerial decisions. The guidelines of the new approach are described in the document 'New approach to Safety implementation at CERN', which also summarizes the main managerial decisions I have taken to strengthen compliance with the CERN Safety policy and Rules. To this end I have also reviewed the mandates of the Safety Commission and the Safety Policy Committee (SAPOCO). Some details of the document 'Safety Policy at CERN' (also known as SAPOCO42) have been modified accordingly; its essential principles, unchanged, remain the basis for the safety policy of the Organisation. I would also like to inform you that I have appointed Dr M. Bona as the new Head of the Safety Commission until 31.12.2008, and that I will proceed soon to the appointment of the members of the new Safety Policy Committee. All members of the personnel are deemed to have taken note of the d...

International conference on the strengthening of nuclear safety in Eastern Europe. Keynote papers. Regulatory aspects of NPP safety, status of safety improvements, status of safety analysis report

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

The Objective of the Conference was to assess the past decade of nuclear safety efforts in countries operating WWER and RBMK nuclear reactors and to address remaining safety issues which require further work. A particular focus of the Conference was on international co-operation and assistance and where such efforts should be focused in the future. All Eastern European countries that operate RBMK or WWER reactors participated in the Conference, and presented papers on three key areas of nuclear safety: Regulatory Aspects of Nuclear Power Plant Safety; Status of Safety Improvements; and Status of Safety Analysis Reports. In addition, representatives from 18 additional countries that provide financial and/or technical assistance and co-operation in the area of WWER and RBMK safety offered the most extensive commentary. Key international (IAEA, World Association of Nuclear Operators, the Nuclear Energy Agency, the G-24 NUSAC, the European Commission, and the EBRD) organizations that provide nuclear safety assistance for WWER and RBMK reactors also made presentations. There is no question that considerable progress on nuclear safety has been made in Eastern Europe. Special mention should be made of successful efforts to strengthen the independence and technical competence of the nuclear regulatory authorities. Efforts should now concentrate on improving the depth and scope of the technical abilities of the regulatory authorities. More attention by governments is needed to ensure that the regulatory authorities have the financial resources and enforcement authority to fully execute their missions. In respect to the operators of the nuclear power plants, they have demonstrated clear progress in operational safety improvements. Significant additional efforts are required to maintain and enhance an effective safety culture. Design safety improvement programmes are in place in all countries. Implementation of these programmes has varied and is particularly affected by

Improving safety through quality management system: SINAGAMA experience

International Nuclear Information System (INIS)

Muhammad Lebai Juri

2000-01-01

This paper discussed critically the policies and measures adopted during preoperational and operational stages to improve safety of workers, public, the environment as well as the products treated at SINAGAMA. (author)

Improving occupational safety in Kuzbass mines

Energy Technology Data Exchange (ETDEWEB)

Evseev, V S

1986-08-01

Some achievements of VostNII are listed in improving occupational safety in Kuzbass mines. Methane is a major problem: 90.6% of mines is in category III or supercategory; over 21% has an absolute methane emission of 30 m/sup 3//min or more. Another problem is spontaneous fires, which cost 2 million t of coal per year. One method of preventing these is injection of antipyrogens (urea and diammonium phosphate); another is the creation of gel (water glass, ammonium chloride and water) barriers in goaf areas. High pressure water jets are also used. Various methods of improving ventilation systems to match increased coal output are proposed, including drilling large diameter ventilation boreholes from the surface. In Leninskugol' mines the useful air is only 55.8% of the total delivered. More attention should be given to degassing (currently producing 130 million m/sup 3//y of methane). Dust levels are increasing due to the advent of narrow web cutter loaders (100% of coal cutter loaders in Kuzbass mines in 1984). Water injection and spraying are partially effective at dust suppression. Some electrical safety devices developed by VostNII are described.

1984 Act on nuclear activities (1984:3)

International Nuclear Information System (INIS)

1984-01-01

This 1984 Act on Nuclear Activities (1984:3) replaces the 1956 Atomic Energy Act as well as the 1977 Act on special permits to charge nuclear reactors with nuclear fuel and the 1980 Act on Public Insight into the Safety Work at Nuclear Power Plants. Like the 1956 Act, the 1984 Act in a safety legislation, which is based on a system of licensing conditions and supervision. According to the fundamental provisions of the 1984 Act, nuclear activities should be conducted in such a way as to meet safety requirements and fulfil the obligations that follow from Sweden's international agreements for the purpose of preventing the proliferation of nuclear weapons. (NEA) [fr

Near-peers improve patient safety training in the preclinical curriculum.

Science.gov (United States)

Raty, Sally R; Teal, Cayla R; Nelson, Elizabeth A; Gill, Anne C

2017-01-01

Accrediting bodies require medical schools to teach patient safety and residents to develop teaching skills in patient safety. We created a patient safety course in the preclinical curriculum and used continuous quality improvement to make changes over time. To assess the impact of resident teaching on student perceptions of a Patient Safety course. Using the Institute for Healthcare Improvement patient safety curriculum as a frame, the course included the seven IHI modules, large group lectures and small group facilitated discussions. Applying a social action methodology, we evaluated the course for four years (Y1-Y4). In Y1, Y2, Y3 and Y4, we distributed a course evaluation to each student (n = 184, 189, 191, and 184, respectively) and the response rate was 96, 97, 95 and 100%, respectively. Overall course quality, clarity of course goals and value of small group discussions increased in Y2 after the introduction of residents as small group facilitators. The value of residents and the overall value of the course increased in Y3 after we provided residents with small group facilitation training. Preclinical students value the interaction with residents and may perceive the overall value of a course to be improved based on near-peer involvement. Residents gain valuable experience in small group facilitation and leadership.

How to Improve Patient Safety Culture in Croatian Hospitals?

Science.gov (United States)

Šklebar, Ivan; Mustajbegović, Jadranka; Šklebar, Duška; Cesarik, Marijan; Milošević, Milan; Brborović, Hana; Šporčić, Krunoslav; Petrić, Petar; Husedžinović, Ino

2016-09-01

Patient safety culture (PCS) has a crucial impact on the safety practices of healthcare delivery systems. The purpose of this study was to assess the state of PSC in Croatian hospitals and compare it with hospitals in the United States. The study was conducted in three public general hospitals in Croatia using the Croatian translation of the Hospital Survey of Patient Safety Culture (HSOPSC). A comparison of the results from Croatian and American hospitals was performed using a T-square test. We found statistically significant differences in all 12 PSC dimensions. Croatian responses were more positive in the two dimensions of Handoff s and Transitions and Overall Perceptions of Patient Safety. In the remaining ten dimensions, Croatian responses were less positive than in US hospitals, with the most prominent areas being Nonpunitive Response to Error, Frequency of Events Reported, Communication Openness, Teamwork within Units, Feedback & Communication about Error, Management Support for Patient Safety, and Staffing. Our findings show that PSC is significantly lower in Croatian than in American hospitals, particularly in the areas of Nonpunitive Response to Error, Leadership, Teamwork, Communication Openness and Staffing. This suggests that a more comprehensive system for the improvement of patient safety within the framework of the Croatian healthcare system needs to be developed. Our findings also help confirm that HSOPSC is a useful and appropriate tool for the assessment of PSC. HSOPSC highlights the PSC components in need of improvement and should be considered for use in national and international benchmarking.

Ways of improving safety for future PWRs in France

International Nuclear Information System (INIS)

Gros, G.; Jalouneix, J.; Manesse, D.; Mattei, J.M.

1994-06-01

Results of thinkings and studies, conducted within the Institute for Nuclear Safety and Protection (IPSN) on various fields of nuclear power plant safety, on the definition of safety objectives and principles for future PWRs. The aim of the studies is to identify ways of improving the design of future plants in France and Germany, with the main following objectives: significant reduction of the global probability of core damage, significant reduction of radioactive releases, mainly for severe accident conditions, and reduction of individual and collective doses received by workers. (R.P.) 3 refs., 1 tab

Improved safety of the system 80+TM standard plants design through increased diversity and redundancy of safety systems

International Nuclear Information System (INIS)

Matzie, Regis A.; Carpentino, Frederick L.; Robertson, James E.

1996-01-01

Safely systems in the System 80+ TM Standard Plant are designed with more redundancy, diversity and simplicity than earlier nuclear power plant designs. These gains were accomplished by an evolutionary process that preserved the desirable and proven features in currently operating nuclear plants, while improving reliability and defense-in-depth. The System 80+ safety systems are the primary contributors to a core damage frequency that is more than 100 times lower than 1980's vintage U. S. designs, including the predecessor System 80 R standard nuclear steam supply system (NSSS) design. The System 80+ design includes significant improvements to the safety injection system, emergency feedwater system, shutdown cooling system, containment spray system, reactor coolant gas vent system, and to their vital support systems. These improvements enhance performance for traditional design basis events and significantly reduce the probability of a severe accident. The System 80+ design also incorporates safety systems to mitigate a severe accident. The added systems include the rapid depressurization system, the in-containment refueling water storage tank, the cavity flooding system. These systems fully address the U. S. Nuclear Regulatory Commission's (US NRC) severe accident policy. The System 80+ safety systems are integrated with the System 80+ Nuclear Island (NI) design. The NI general arrangement provides quadrant separation of the safety systems for protection from fire and flooding, and large equipment pull spaces and lay down areas for maintenance. This paper will describe the System 80+ safety systems advanced design features, the improved accident prevention and mitigation capabilities, and startup, operating and maintenance benefits

Nature-based strategies for improving urban health and safety

Science.gov (United States)

Michelle C. Kondo; Eugenia C. South; Charles C. Branas

2015-01-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature...

Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

Science.gov (United States)

Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

2012-01-01

Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

Safety assessment of Olkiluoto NPP units 1 and 2. Decision of the Radiation and Nuclear Safety Authority regarding the periodic safety review of the Olkiluoto NPP

International Nuclear Information System (INIS)

2010-02-01

In this safety assessment the Radiation and Nuclear Safety Authority (STUK) has evaluated the safety of the Olkiluoto Nuclear Power Plant units 1 and 2 in connection with the periodic safety review. This safety assessment provides a summary of the reviews, inspections and continuous oversight carried out by STUK. The issues addressed in the assessment and the related evaluation criteria are set forth in the nuclear energy and radiation safety legislation and the regulations issued thereunder. The provisions of the Nuclear Energy Act concerning the safe use of nuclear energy, security and emergency preparedness arrangements, and waste management are specified in more detail in the Government Decrees and Regulatory Guides issued by STUK. Based on the assessment, STUK consideres that the Olkiluoto Nuclear Power Plant units 1 and 2 meet the set safety requirements for operational nuclear power plants, the emergency preparedness arrangements are sufficient and the necessary control to prevent the proliferation of nuclear weapons has been appropriately arranged. The physical protection of the Olkiluoto nuclear power plant is not yet completely in compliance with the requirements of Government Decree 734/2008, which came into force in December 2008. Further requirements concerning this issue based also on the principle of continuous improvement were included in the decision relating to the periodic safety review. The safety of the Olkiluoto nuclear power plant was assessed in compliance with the Government Decree on the Safety of Nuclear Power Plants (733/2008), which came into force in 2008. The decree notes that existing nuclear power plants need not meet all the requirements set out for new plants. Most of the design bases pertaining to the Olkiluoto 1 and 2 nuclear power plant units were set in the 1970s. Substantial modernisations have been carried out at the Olkiluoto 1 and 2 nuclear power plant units since their commissioning to improve safety. This is in line with

Improvement critical care patient safety: using nursing staff development strategies, at Saudi Arabia.

Science.gov (United States)

Basuni, Enas M; Bayoumi, Magda M

2015-01-13

Intensive care units (ICUs) provide lifesaving care for the critically ill patients and are associated with significant risks. Moreover complexity of care within ICUs requires that the health care professionals exhibit a trans-disciplinary level of competency to improve patient safety. This study aimed at using staff development strategies through implementing patient safety educational program that may minimize the medical errors and improve patient outcome in hospital. The study was carried out using a quasi experimental design. The settings included the intensive care units at General Mohail Hospital and National Mohail Hospital, King Khalid University, Saudi Arabia. The study was conducted from March to June 2012. A convenience sample of all prevalent nurses at three shifts in the aforementioned settings during the study period was recruited. The program was implemented on 50 staff nurses in different ICUs. Their age ranged between 25-40 years. Statistically significant relation was revealed between safety climate and job satisfaction among nurses in the study sample (p=0.001). The years of experiences in ICU ranged between one year 11 (16.4) to 10 years 20 (29.8), most of them (68%) were working in variable shift, while 32% were day shift only. Improvements were observed in safety climate, teamwork climate, and nurse turnover rates on ICUs after implementing a safety program. On the heels of this improvement; nurses' total knowledge, skills and attitude were enhanced regarding patient safety dimensions. Continuous educational program for ICUs nursing staff through organized in-service training is needed to increase their knowledge and skills about the importance of improving patient safety measure. Emphasizing on effective collaborative system also will improve patient safety measures in ICUS.

A report on developing a checklist to assess company plans focused on improving safety awareness, safe behaviour and safety culture: final report

NARCIS (Netherlands)

Steijger, N.; Starren, H.; Keus, M.; Gort, J.; Vervoort, M.

2003-01-01

This report describes the process of developing a checklist to asses company plans focused on improving safety awareness, safe behaviour and safety culture. These plans are part of a programme initiated by the Ministry of Social Affairs and Employment aiming at improving the safety performance of

USSR orders computers to improve nuclear safety

International Nuclear Information System (INIS)

Anon.

1990-01-01

Control Data Corp (CDC) has received an order valued at $32-million from the Soviet Union for six Cyber 962 mainframe computer systems to be used to increase the safety of civilian nuclear powerplants. The firm is now waiting for approval of the contract by the US government and Western Allies. The computers, ordered by the Soviet Research and Development Institute of Power Engineering (RDIPE), will analyze safety factors in the operation of nuclear reactors over a wide range of conditions. The Soviet Union's civilian nuclear program is one of the largest in the world, with over 50 plants in operation. Types of safety analyses the computers perform include: neutron-physics calculations, radiation-protection studies, stress analysis, reliability analysis of equipment and systems, ecological-impact calculations, transient analysis, and support activities for emergency response. They also include a simulator with realistic mathematical models of Soviet nuclear powerplants to improve operator training

Safety Culture Improvement Activities of YGN 3 and 4

International Nuclear Information System (INIS)

Cho, Il Hoon

2006-01-01

In nuclear power industry all over the world, we can never overemphasize the importance of nuclear safety. After the Chernobyl accident occurred in 1986, Korean nuclear energy industry had made every effort to enhance nuclear safety culture further. And, as a result of the efforts, Korean government declared the five principles for the nuclear energy safety regulation, which were included in the Nuclear Energy Safety Policy Statement published in 1994. In 2001, through the announcement of Nuclear Safety Charter for the peaceful use of nuclear energy, the Ministry of Science and Technology proclaimed at home and abroad that the protection of citizens and environment by securing nuclear safety should be the highest priority in nuclear energy industry. Occupying almost 40% share of domestic electricity generation, Korea Hydro and Nuclear Power Co. decided 'Safety Top Priority Management' as president's management policy, and clearly presented the safety goal to the personnel. By this, the management can effectively place stress on securing safety, which is our highest priority and the only way to win public confidence toward nuclear energy industry. This is prepared to shortly introduce the activities for improving safety culture in Yonggwang Nuclear Power unit 3 and 4 (YGN 3 and 4)

Continuous improvement of the MHTGR safety and competitive performance

International Nuclear Information System (INIS)

Eichenberg, T.W.; Etzel, K.T.; Mascaro, L.L.; Rucker, R.A.

1992-05-01

An increase in reactor module power from 350 to 450 MW(t) would markedly improve the economics of the Modular High Temperature Gas-Cooled Reactor (MHTGR). The higher power level was recommended as the result of an in-depth cost reduction study undertaken to compete with the declining price of fossil fuel. The safety assessment confirms that the high level of safety, which relies on inherent characteristics and passive features, is maintained at the elevated power level. Preliminary systems, nuclear, and safety performance results are discussed for the recommended 450 MW(t) design. Optimization of plant parameters and design modifications accommodated the operation of the steam generator and circulator at the higher power level. Events in which forced cooling is lost, designated as conduction cooldowns are described in detail. For the depressurized conduction cooldown, without full helium inventory, peak fuel temperatures are significantly lowered. A more negative temperature coefficient of reactivity was achieved while maintaining an adequate fuel cycle and reactivity control. Continual improvement of the MHTGR delivers competitive performance without relinquishing the high safety margins demanded of the next generation of power plants

Improving Aviation Safety in Indonesia: How Many More Accidents?

Directory of Open Access Journals (Sweden)

Ridha Aditya Nugraha

2016-12-01

Full Text Available Numerous and consecutive aircraft accidents combined with a consistent failure to meet international safety standards in Indonesia, namely from the International Civil Aviation Organization and the European Aviation Safety Agency have proven a nightmare for the country’s aviation safety reputation. There is an urgent need for bureaucracy reform, harmonization of legislation, and especially ensuring legal enforcement, to bring Indonesian aviation safety back to world standards. The Indonesian Aviation Law of 2009 was enacted to reform the situation in Indonesia. The law has become the ground for drafting legal framework under decrees of the Minister of Transportation, which have allowed the government to perform follow-up actions such as establishing a single air navigation service provider and guaranteeing the independency of the Indonesian National Transportation Safety Committee. A comparison with Thailand is made to enrich the perspective. Finally, foreign aviation entities have a role to assist states, in this case Indonesia, in improving its aviation safety, considering the global nature of air travel.

Design safety improvements of Kozloduy NPP to meet the modern safety requirements towards the old generation PWR

International Nuclear Information System (INIS)

Hinovski, M.P.; Sabinov, S.

2001-01-01

Activities related to safety improvement of Kozloduy NPP units, started at the end of 1970s included seismic resistance upgrading, fire safety improvement, reliable heat final absorber etc. During the last 10 years the approach was systematized and improved. Units 1 to 4 are of great interest; therefore here we will discuss these units only. As a result of studies and analyses performed at the end of the 1980s and the beginning of the 1990s, problems related to the safety were identified and complex of technical measures was developed and planned. A considerable part of these measures has already been implemented, and the rest will be performed during the next years. Activities were performed by stages, and at the moment the last stage is under way. It shall be finished by the year 2003. The number of the measures is quite large to describe them here in full scope -- during the first stage of the safety program (1991-1993) were developed and analyzed more than 4200 documents and more than 160 measures were executed. During the second and third stages more than 300 important improvements were realized. In the frame of the program, financed by EBRD, 10 new systems with great importance were implemented and 8 systems were significantly modified. The main measures are described below. (author)

ICT support safety, health and environment management system (e-SHEMS)

International Nuclear Information System (INIS)

Amy Hamijah Ab Hamid; Hasfazilah Hassan; Siti Massari Amran; Norzalina Nasirudin; Azimawati Ahmad; Mohd Suhaimi Kassim; Shaharum Ramli; Musa Ibrahim; Mohd Sidek Othman

2009-01-01

Safety program is compulsory for a nuclear technology related research and development institution like Nuclear Malaysia. It has been implemented in various safety standard systems including Act 514, Act 304, ISO 14000, OSHAS 18001 and IAEA. This paper began with Nuclear Malaysia history in initiating our own safety standard system since 1982. Currently, Nuclear Malaysia's Safety Health and Environment Management System (SHE-MS) was stipulated for similar purpose. Furthermore, it has implemented guidelines by AELB, IAEA, DOSH, Fire Brigade and Police Force. This paper briefly describes the overall structure of SHE-MS, how it functions and being managed, and lessons learned. The findings which are based on the issues and challenges, then it can be analysed to propose a development of SHE-MS ICT-support application for future improvement and enhancement in inculcating and nurturing safety culture among Nuclear Malaysia staff. (Author)

The Role of OSHA in Safety and Health. Module SH-02. Safety and Health.

Science.gov (United States)

Center for Occupational Research and Development, Inc., Waco, TX.

This student module on the role of OSHA (Occupational Safety and Health Act) in Safety and Health is one of 50 modules concerned with job safety and health. This module looks at the OSHA Act, its aims, and the rights and responsibilities of employers and workers under the Act. Following the introduction, 16 objectives (each keyed to a page in the…

A performance improvement plan to increase nurse adherence to use of medication safety software.

Science.gov (United States)

Gavriloff, Carrie

2012-08-01

Nurses can protect patients receiving intravenous (IV) medication by using medication safety software to program "smart" pumps to administer IV medications. After a patient safety event identified inconsistent use of medication safety software by nurses, a performance improvement team implemented the Deming Cycle performance improvement methodology. The combined use of improved direct care nurse communication, programming strategies, staff education, medication safety champions, adherence monitoring, and technology acquisition resulted in a statistically significant (p < .001) increase in nurse adherence to using medication safety software from 28% to above 85%, exceeding national benchmark adherence rates (Cohen, Cooke, Husch & Woodley, 2007; Carefusion, 2011). Copyright © 2012 Elsevier Inc. All rights reserved.

Application of VR and HF technologies for improving industrial safety

NARCIS (Netherlands)

Loupos, K.; Christopoulos, D.; Vezzadini, L.; Hoekstra, W.; Salem, W.; Chung, P.W.H.

2007-01-01

Safety in industrial environments can nowadays be regarded as an issue of major importance. Large amounts of money are spent by industries on this matter in order to improve safety in all levels, by reducing risks of causing damages to equipment, human injuries or even fatalities. Virtual Reality

Improving Patient Safety Culture in Primary Care: A Systematic Review

NARCIS (Netherlands)

Verbakel, Natasha J.; Langelaan, Maaike; Verheij, Theo J. M.; Wagner, Cordula; Zwart, Dorien L. M.

Background: Patient safety culture, described as shared values, attitudes and behavior of staff in a health-care organization, gained attention as a subject of study as it is believed to be related to the impact of patient safety improvements. However, in primary care, it is yet unknown, which

Federal Aviation Administration weather program to improve aviation safety

Science.gov (United States)

Wedan, R. W.

1983-01-01

The implementation of the National Airspace System (NAS) will improve safety services to aviation. These services include collision avoidance, improved landing systems and better weather data acquisition and dissemination. The program to improve the quality of weather information includes the following: Radar Remote Weather Display System; Flight Service Automation System; Automatic Weather Observation System; Center Weather Processor, and Next Generation Weather Radar Development.

The Role of the Master in Improving Safety Culture Onboard Ships

Directory of Open Access Journals (Sweden)

T. Bielic

2017-03-01

Full Text Available As a complex socio-technical system marine transportation is open to risks. Due to the efforts of international organisations, flag and port administrations, classification societies and ship-owners the safety record has steadily improved. However, marine accidents resulting from inadequate safety culture still occur. In this paper examples of recent accidents related to different dimensions of safety culture are provided. The role of the master in achieving an enhanced safety is emphasised.

Improving the efficacy and safety of engineered T cell therapy for cancer.

Science.gov (United States)

Shi, Huan; Liu, Lin; Wang, Zhehai

2013-01-28

Adoptive T-cell therapy (ACT) using tumor-infiltrating lymphocytes (TILs) is a powerful immunotherapeutics approach against metastatic melanoma. The success of TIL therapy has led to novel strategies for redirecting normal T cells to recognize tumor-associated antigens (TAAs) by genetically engineering tumor antigen-specific T cell receptors (TCRs) or chimeric antigen receptor (CAR) genes. In this manner, large numbers of antigen-specific T cells can be rapidly generated compared with the longer term expansion of TILs. Great efforts have been made to improve these approaches. Initial clinical studies have demonstrated that genetically engineered T cells can mediate tumor regression in vivo. In this review, we discuss the development of TCR and CAR gene-engineered T cells and the safety concerns surrounding the use of these T cells in patients. We highlight the importance of judicious selection of TAAs for modified T cell therapy and propose solutions for potential "on-target, off-organ" toxicity. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

CORPORATE CULTURE AS A TOOL TO IMPROVE SAFETY CULTURE

Directory of Open Access Journals (Sweden)

Erika SUJOVÁ

2013-07-01

Full Text Available The aim of the article is to explain interconnectivity between corporate culture and safety culture, which aim to utilize motivation to prevent work accidents and other unwanted events in an enterprise. The article deals with ways how to improve approaches to Occupational Health & Safety, OH&S, at work place through proper direction of corporate culture. It introduces internal and external determinants of corporate culture, which have a significant effect. The article introduces common features of corporate culture and safety culture as an element of the OH&S management system with emphasis on system effectiveness. The final portion of the article presents the hierarchy of needs model, which may serve as a basis motivating employees to follow safety and health rules at work place.

Kozloduy nuclear power plant. Units 1-4. Status of safety improvements. Rev. 2

International Nuclear Information System (INIS)

1999-01-01

This paper presents the results of the safety improvements activities carried out by the Kozloduy Nuclear Power Plant (KNPP) within the period 1990-1998. The steam supply system of this units is based of the reactor WWER-440/ B-230, which is a PWR of russian design developed according to the safety standards in force in USSR in late sixties. Up to now 10 reactor units of this type are in operation in four NPPs. Despite of efforts of the different plants to implement safety improvements measures during first 10-15 years of operation of this type of reactor its major safety problems were not eliminated and were a subject of international concern. The systematic evaluation of the deficiencies of the original design of this type of reactors have been initiated by IAEA in the beginning of 1990 and brought to developing a comprehensive list of safety problems which required urgent implementation of safety measures in all plants. To solve this problems in 1991 KNPP initiated implementation of so called 'short term' safety improvement program, developed with the help of WANO under agreement with Bulgarian Nuclear Safety Authority (BNSA) and consortium RISKAUDIT. The program was based on a stage approach and was foreseen to be implemented by tree stages in very tight time schedule in order to achieve significant and rapid improvements of the level of safety in operation of the units. The Short term program was implemented between from 1991 to 1997 owing to strong safety commitment of NEC and KNPP staff as well as broad international cooperation and financial support. Important part of resources were supplied under PHARE program of CEC, EBRD grant agreement and EDF support. In parallel a special assessment process started in 1995 in order to evaluate the level of safety, achieved by Short Term Program, according to current safety standards and to define the measures, which should be implemented by the Utility to complete the process of improving the safety in future

BRICS: opportunities to improve road safety.

Science.gov (United States)

Hyder, Adnan A; Vecino-Ortiz, Andres I

2014-06-01

Brazil, the Russian Federation, India, China and South Africa--the countries known as BRICS--are currently undergoing a deep epidemiological transition that is mainly driven by rapid economic growth and technological change. The changes being observed in the distribution of the burden of diseases and injuries--such as recent increases in the incidence of road traffic injuries--are matters of concern. BRICS may need stronger institutional capacity to address such changes in a timely way. In this paper, we present data on road traffic injuries in BRICS and illustrate the enormous challenge that these countries currently face in reducing the incidence of such injuries. There is an urgent need to improve road safety indicators in every country constituting BRICS. It is imperative for BRICS to invest in system-wide road safety interventions and reduce the mortality and morbidity from road traffic injuries.

Improving ICU risk management and patient safety.

Science.gov (United States)

Kielty, Lucy Ann

2017-06-12

Purpose The purpose of this paper is to describe a study which aimed to develop and validate an assessment method for the International Electrotechnical Commission (IEC) 80001-1 (IEC, 2010) standard (the Standard); raise awareness; improve medical IT-network project risk management processes; and improve intensive care unit patient safety. Design/methodology/approach An assessment method was developed and piloted. A healthcare IT-network project assessment was undertaken using a semi-structured group interview with risk management stakeholders. Participants provided feedback via a questionnaire. Descriptive statistics and thematic analysis was undertaken. Findings The assessment method was validated as fit for purpose. Participants agreed (63 per cent, n=7) that assessment questions were clear and easy to understand, and participants agreed (82 per cent, n=9) that the assessment method was appropriate. Participant's knowledge of the Standard increased and non-compliance was identified. Medical IT-network project strengths, weaknesses, opportunities and threats in the risk management processes were identified. Practical implications The study raised awareness of the Standard and enhanced risk management processes that led to improved patient safety. Study participants confirmed they would use the assessment method in future projects. Originality/value Findings add to knowledge relating to IEC 80001-1 implementation.

Improvements in operational safety performance of the Magnox power stations

Energy Technology Data Exchange (ETDEWEB)

Marchese, C.J. [BNFL Magnox Generation, Berkeley (United Kingdom)

2000-10-01

In the 43 years since commencement of operation of Calder Hall, the first Magnox power station, there remain eight Magnox stations and 20 reactors still in operation, owned by BNFL Magnox Generation. This paper describes how the operational safety performance of these stations has significantly improved over the last ten years. This has been achieved against a background of commercial competition introduced by privatization and despite the fact that the Magnox base design belongs to the past. Finally, the company's future plans for continued improvements in operational safety performance are discussed. (author)

Five Topics Health Care Simulation Can Address to Improve Patient Safety

DEFF Research Database (Denmark)

Sollid, Stephen J M; Dieckman, Peter; Aase, Karina

2017-01-01

OBJECTIVES: There is little knowledge about which elements of health care simulation are most effective in improving patient safety. When empirical evidence is lacking, a consensus statement can help define priorities in, for example, education and research. A consensus process was therefore...... initiated to define priorities in health care simulation that contribute the most to improve patient safety.  METHODS: An international group of experts took part in a 4-stage consensus process based on a modified nominal group technique. Stages 1 to 3 were based on electronic communication; stage 4 was a 2......-day consensus meeting at the Utstein Abbey in Norway. The goals of stage 4 were to agree on the top 5 topics in health care simulation that contribute the most to patient safety, identify the patient safety problems they relate to, and suggest solutions with implementation strategies...

Regulatory risks associated with nuclear safety legislation after Fukushima Daiichi Nuclear Accident in Japan. Focus on legal structure of the nuclear reactor regulation act

International Nuclear Information System (INIS)

Tanabe, Tomoyuki; Maruyama, Masahiro

2016-01-01

Nuclear safety regulations enforced after Fukushima Daiichi Nuclear Accident under the Nuclear Reactor Regulation Act face the following regulatory problems that involve potential risk factors for nuclear businesses; 1) 'entity based regulation' unable to cope with business cessation or bankruptcy of the entity subject of regulation, 2) potential risk of the Nuclear Regulation Authority's inappropriate involvement in nuclear industry policy beyond their duty, and 3) compliance of backfits under vague regulations. In order to alleviate them, this report, through analyzing these regulatory problems from the view point of sound development of the nuclear industry, proposes the following regulatory reforms; (1) To clarify the rule for industry policy in nuclear regulations and enable the authority, Ministry of Economy, Trade and Industry, to choose most appropriate industrial policy measure. (2) Through establishing safety goals as measures to promote continuous improvement of nuclear safety regulations, to stimulate timely adjustments of the regulations, and to introduce a legal mechanism into the nuclear regulation systems under which validity of administrative law and its application can be checked. (author)

Does external evaluation of laboratories improve patient safety?

Science.gov (United States)

Noble, Michael A

2007-01-01

Laboratory accreditation and External Quality Assessment (also called proficiency testing) are mainstays of laboratory quality assessment and performance. Both practices are associated with examples of improved laboratory performance. The relationship between laboratory performance and improved patient safety is more difficult to assess because of the many variables that are involved with patient outcome. Despite this difficulty, the argument to continue external evaluation of laboratories is too compelling to consider the alternative.

Optimization of safety equipment outages improves safety

International Nuclear Information System (INIS)

Cepin, Marko

2002-01-01

Testing and maintenance activities of safety equipment in nuclear power plants are an important potential for risk and cost reduction. An optimization method is presented based on the simulated annealing algorithm. The method determines the optimal schedule of safety equipment outages due to testing and maintenance based on minimization of selected risk measure. The mean value of the selected time dependent risk measure represents the objective function of the optimization. The time dependent function of the selected risk measure is obtained from probabilistic safety assessment, i.e. the fault tree analysis at the system level and the fault tree/event tree analysis at the plant level, both extended with inclusion of time requirements. Results of several examples showed that it is possible to reduce risk by application of the proposed method. Because of large uncertainties in the probabilistic safety assessment, the most important result of the method may not be a selection of the most suitable schedule of safety equipment outages among those, which results in similarly low risk. But, it may be a prevention of such schedules of safety equipment outages, which result in high risk. Such finding increases the importance of evaluation speed versus the requirement of getting always the global optimum no matter if it is only slightly better that certain local one

Facilities management and industrial safety

International Nuclear Information System (INIS)

2003-06-01

This book lists occupation safety and health acts with purpose, definition and management system of safety and health, enforcement ordinance of occupation safety and health acts and enforcement regulations such as general rules, safety and health cover, system of management on safety and health, regulation of management on safety and health, regulations of harmfulness and protection of danger, heath management for workers, supervisor and command and inspection of machine and equipment.

Discussion on establishment and improvement of the nuclear safety culture system

International Nuclear Information System (INIS)

Lu Weiqiang; Na Fuli

2010-01-01

By discussion of the problems in the manufacture process of nuclear power equipment enterprisers, puts forwards the tentative idea of establishment the nuclear safety culture system, meanwhile, gives some suggestions in order to improving the nuclear safety culture system. (authors)

Organizational factors influencing improvements in safety

International Nuclear Information System (INIS)

Marcus, A.; Nichols, M.L.; Olson, J.; Osborn, R.; Thurber, J.

1991-01-01

Results of conceptual and empirical research conducted by this research team, and published in NUREG-CR 5437, suggested that processes of organizational problem solving and learning provide a promising area for understanding improvement in safety-related performance in nuclear power plants. In this paper the authors describe the way in which they have built upon that work and gone much further in empirically examining a range of potentially important organizational factors related to safety. The paper describes (1) overall trends in plant performance over time on the Nuclear Regulatory Commission performance indicators, (2) the major elements in the conceptual framework guiding the current work, which seeks among other things to explain those trends, (3) the specific variables used as measures of the central concepts, (4) the results to date of the quantitative empirical work and qualitative work in progress, and (5) conclusions from the research

77 FR 10358 - Acceptance of ASTM F963-11 as a Mandatory Consumer Product Safety Standard

Science.gov (United States)

2012-02-22

... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Chapter II Acceptance of ASTM F963-11 as a Mandatory... have accepted the revised ASTM F963-11 standard titled, Standard Consumer Safety Specifications for Toy Safety. Pursuant to section 106 of the Consumer Product Safety Improvement Act of 2008, ASTM F963-11 will...

Processing and storage of blood components: strategies to improve patient safety

Directory of Open Access Journals (Sweden)

Pietersz RNI

2015-08-01

Full Text Available Ruby NI Pietersz, Pieter F van der Meer Department of Product and Process Development, Sanquin Blood Bank, Amsterdam, the Netherlands Abstract: This review focuses on safety improvements of blood processing of various blood components and their respective storage. A solid quality system to ensure safe and effective blood components that are traceable from a donor to the patient is the foundation of a safe blood supply. To stimulate and guide this process, National Health Authorities should develop guidelines for blood transfusion, including establishment of a quality system. Blood component therapy enabled treatment of patients with blood constituents that were missing, only thus preventing reactions to unnecessarily transfused elements. Leukoreduction prevents many adverse reactions and also improves the quality of the blood components during storage. The safety of red cells and platelets is improved by replacement of plasma with preservative solutions, which results in the reduction of isoantibodies and plasma proteins. Automation of blood collection, separation of whole blood into components, and consecutive processing steps, such as preparation of platelet concentrate from multiple donations, improves the consistent composition of blood components. Physicians can better prescribe the number of transfusions and therewith reduce donor exposure and/or the risk of pathogen transmission. Pathogen reduction in cellular blood components is the latest development in improving the safety of blood transfusions for patients. Keywords: blood components, red cell concentrates, platelet concentrates, plasma, transfusion, safety 

Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities

International Nuclear Information System (INIS)

Batandjieva, B.; Torres-Vidal, C.

2002-01-01

The International Atomic Energy Agency (IAEA) Coordinated research program ''Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities'' (ISAM) has developed improved safety assessment methodology for near surface disposal facilities. The program has been underway for three years and has included around 75 active participants from 40 countries. It has also provided examples for application to three safety cases--vault, Radon type and borehole radioactive waste disposal facilities. The program has served as an excellent forum for exchange of information and good practices on safety assessment approaches and methodologies used worldwide. It also provided an opportunity for reaching broad consensus on the safety assessment methodologies to be applied to near surface low and intermediate level waste repositories. The methodology has found widespread acceptance and the need for its application on real waste disposal facilities has been clearly identified. The ISAM was finalized by the end of 2000, working material documents are available and an IAEA report will be published in 2002 summarizing the work performed during the three years of the program. The outcome of the ISAM program provides a sound basis for moving forward to a new IAEA program, which will focus on practical application of the safety assessment methodologies to different purposes, such as licensing radioactive waste repositories, development of design concepts, upgrading existing facilities, reassessment of operating repositories, etc. The new program will also provide an opportunity for development of guidance on application of the methodology that will be of assistance to both safety assessors and regulators

Innovative Patient Safety Curriculum Using iPAD Game (PASSED) Improved Patient Safety Concepts in Undergraduate Medical Students.

Science.gov (United States)

Kow, A W C; Ang, B L S; Chong, C S; Tan, W B; Menon, K R

2016-11-01

While healthcare outcomes have improved significantly, the complex management of diseases in the hospitals has also escalated the risks in patient safety. Therefore, in the process of training medical students to be proficient in medical knowledge and skills, the importance of patient safety cannot be neglected. A new innovation using mobile apps gaming system (PAtient Safety in Surgical EDucation-PASSED) to teach medical students on patient safety was created. Students were taught concepts of patient safety followed by a gaming session using iPad games created by us. This study aims to evaluate the outcome of patient safety perception using the PASSED games created. An interactive iPad game focusing on patient safety issues was created by the undergraduate education team in the Department of Surgery, Yong Loo Lin School of Medicine at the National University of Singapore. The game employed the unique touched-screen feature with clinical scenarios extracted from the hospital sentinel events. Some of the questions were time sensitive, with extra bonus marks awarded if the student provided the correct answer within 10 s. Students could reattempt the questions if the initial answer was wrong. However, this entailed demerit points. Third-year medical students posted to the Department of Surgery experienced this gaming system in a cohort of 55-60 students. Baseline understanding of the students on patient safety was evaluated using Attitudes to Patient Safety Questionnaire III (APSQ-III) prior to the game. A 20 min talk on concept of patient safety using the WHO Patient Safety Guidelines was conducted. Following this, students downloaded the apps from ITune store and played with the game for 20-30 min. The session ended with the students completing the postintervention questionnaire. A total of 221 3rd year medical students responded to the survey during the PASSED session. Majority of the students felt that the PASSED game had trained them to understand the

Improving Patient Safety in Anesthesia: A Success Story?

International Nuclear Information System (INIS)

Botney, Richard

2008-01-01

Anesthesia is necessary for surgery; however, it does not deliver any direct therapeutic benefit. The risks of anesthesia must therefore be as low as possible. Anesthesiology has been identified as a leader in improving patient safety. Anesthetic mortality has decreased, and in healthy patients can be as low as 1:250,000. Trends in anesthetic morbidity have not been as well defined, but it appears that the risk of injury is decreasing. Studies of error during anesthesia and Closed Claims studies have identified sources of risk and methods to reduce the risks associated with anesthesia. These include changes in technology, such as anesthetic delivery systems and monitors, the application of human factors, the use of simulation, and the establishment of reporting systems. A review of the important events in the past 50 years illustrates the many steps that have contributed to the improvements in anesthesia safety

Feedback from incident reporting: information and action to improve patient safety.

Science.gov (United States)

Benn, J; Koutantji, M; Wallace, L; Spurgeon, P; Rejman, M; Healey, A; Vincent, C

2009-02-01

Effective feedback from incident reporting systems in healthcare is essential if organisations are to learn from failures in the delivery of care. Despite the wide-scale development and implementation of incident reporting in healthcare, studies in the UK suggest that information concerning system vulnerabilities could be better applied to improve operational safety within organisations. In this article, the findings and implications of research to identify forms of effective feedback from incident reporting are discussed, to promote best practices in this area. The research comprised a mixed methods review to investigate mechanisms of effective feedback for healthcare, drawing upon experience within established reporting programmes in high-risk industry and transport domains. Systematic searches of published literature were undertaken, and 23 case studies describing incident reporting programmes with feedback were identified for analysis from the international healthcare literature. Semistructured interviews were undertaken with 19 subject matter experts across a range of domains, including: civil aviation, maritime, energy, rail, offshore production and healthcare. In analysis, qualitative information from several sources was synthesised into practical requirements for developing effective feedback in healthcare. Both action and information feedback mechanisms were identified, serving safety awareness, improvement and motivational functions. The provision of actionable feedback that visibly improved systems was highlighted as important in promoting future reporting. Fifteen requirements for the design of effective feedback systems were identified, concerning: the role of leadership, the credibility and content of information, effective dissemination channels, the capacity for rapid action and the need for feedback at all levels of the organisation, among others. Above all, the safety-feedback cycle must be closed by ensuring that reporting, analysis and

Nuclear Safety through International Cooperation

International Nuclear Information System (INIS)

Flory, Denis

2013-01-01

The Fukushima Daiichi nuclear accident was the worst at a nuclear facility since the Chernobyl accident in 1986. It caused deep public anxiety and damaged confidence in nuclear power. Following this accident, strengthening nuclear safety standards and emergency response has become an imperative at the global level. The IAEA is leading in developing a global approach, and the IAEA Action Plan on Nuclear Safety is providing a comprehensive framework and acting as a significant driving force to identify lessons learned and to implement safety improvements. Strengthening nuclear safety is addressed through a number of measures proposed in the Action Plan including 12 main actions focusing on safety assessments in the light of the accident. Significant progress has been made in assessing safety vulnerabilities of nuclear power plants, strengthening the IAEA's peer review services, improvements in emergency preparedness and response capabilities, strengthening and maintaining capacity building, as well as widening the scope and enhancing communication and information sharing with Member States, international organizations and the public. Progress has also been made in reviewing the IAEA's safety standards, which continue to be widely applied by regulators, operators and the nuclear industry in general, with increased attention and focus on accident prevention, in particular severe accidents, and emergency preparedness and response.

Multi-approach model for improving agrochemical safety among rice farmers in Pathumthani, Thailand

Directory of Open Access Journals (Sweden)

Siriwong W

2012-07-01

Full Text Available Buppha Raksanam,1,2 Surasak Taneepanichskul,2 Wattasit Siriwong,2 Mark Robson3,41Sirindhorn College of Public Health, Trang, 2College of Public Health Sciences, Chulalongkorn University, Bangkok, Thailand; 3School of Environmental and Biological Sciences, Rutgers University, 4School of Public Health, University of Medicine and Dentistry of New Jersey, New Brunswick, NJ, USAAbstract: The large-scale use of agrochemicals has raised environmental and human health concerns. A comprehensive intervention strategy for improving agrochemical safety among rice farmers in Thailand is lacking. The objective of this study is to develop a model in order to improve farmers’ health and prevent them from being exposed to agrochemical hazards, in addition to evaluating the effectiveness of the intervention in terms of agrochemical safety. This study was conducted between October 2009 and January 2011. It measures changes in the mean scores of agrochemical knowledge, health beliefs, agrochemical use behaviors, and in-home pesticide safety. Knowledge of agrochemical use constitutes a basic knowledge of agrochemicals and agrochemical safety behaviors. Health beliefs constitute perceived susceptibility, severity, benefits, and barriers to using agrochemicals. Agrochemical use behaviors include self-care practices in terms of personal health at specific times including before spraying, while spraying, during storage, transportation, waste management, and health risk management. Fifty rice farmers from Khlong Seven Community (study group and 51 rice farmers from Bueng Ka Sam community (control group were randomly recruited with support from community leaders. The participants were involved in a combination of home visits (ie, pesticide safety assessments at home and community participatory activities regarding agrochemical safety. This study reveals that health risk behaviors regarding agrochemical exposure in the study area are mainly caused by lack of attention to

Improving Patient Safety With the Military Electronic Health Record

National Research Council Canada - National Science Library

Charles, Marie-Jocelyne; Harmon, Bart J; Jordan, Pamela S

2005-01-01

The United States Department of Defense (DoD) has transformed health care delivery in its use of information technology to automate patient data documentation, leading to improvements in patient safety...

Behavior-based safety on construction sites: a case study.

Science.gov (United States)

Choudhry, Rafiq M

2014-09-01

This work presents the results of a case study and describes an important area within the field of construction safety management, namely behavior-based safety (BBS). This paper adopts and develops a management approach for safety improvements in construction site environments. A rigorous behavioral safety system and its intervention program was implemented and deployed on target construction sites. After taking a few weeks of safety behavior measurements, the project management team implemented the designed intervention and measurements were taken. Goal-setting sessions were arranged on-site with workers' participation to set realistic and attainable targets of performance. Safety performance measurements continued and the levels of performance and the targets were presented on feedback charts. Supervisors were asked to give workers recognition and praise when they acted safely or improved critical behaviors. Observers were requested to have discussions with workers, visit the site, distribute training materials to workers, and provide feedback to crews and display charts. They were required to talk to operatives in the presence of line managers. It was necessary to develop awareness and understanding of what was being measured. In the process, operatives learned how to act safely when conducting site tasks using the designed checklists. Current weekly scores were discussed in the weekly safety meetings and other operational site meetings with emphasis on how to achieve set targets. The reliability of the safety performance measures taken by the company's observers was monitored. A clear increase in safety performance level was achieved across all categories: personal protective equipment; housekeeping; access to heights; plant and equipment, and scaffolding. The research reveals that scores of safety performance at one project improved from 86% (at the end of 3rd week) to 92.9% during the 9th week. The results of intervention demonstrated large decreases in

Evolving US Food Safety Regulations and International Competitors: Implementation Dynamics

Directory of Open Access Journals (Sweden)

Tekuni Nakuja

2015-12-01

Full Text Available The 2011 US Food Safety Modernization Act (FSMA represents a major initiative to improve food safety. The legislation mandates the US Food and Drug Administration (FDA with developing a regulatory system to implement the Act. Both domestic and foreign firms that wish to supply US consumers with food will face a considerable increase in regulatory costs. Implementation has proved challenging for the FDA leading to delays which increase investment risks for foreign suppliers, particulalry from developing countries. This paper sets out the major FSMA requirements and examines how the regulatory burden may fall on foreign versus US suppliers.

Meeting Overlapping Requirements of the Quality Management System and Act 304 at SINAGAMMA, ALURTRON and RAYMINTEX: An Improvement

International Nuclear Information System (INIS)

Nik Arlina Nik Ali; Nurul Huda Mudri; Rohaizah Ahmad

2011-01-01

Sinagama, Alurtron and Raymintex are three facilities at Nuclear Malaysia using high radiation sources to provide irradiation service to customers. These three facilities have to fulfill both the requirements of the MS ISO 9001:2008 standard and the legal requirements of Act 304. To fulfill the requirements of the applicable Act 304, scheduled radiation monitoring on personnel, work place and environment should be carried out. This paper will discuss the effectiveness of the management in fulfilling the requirements of ISO 9001 standard and Act 304 regarding the safety of workers and the environment. (author)

Using Iterative Plan-Do-Study-Act Cycles to Improve Teaching Pedagogy.

Science.gov (United States)

Murray, Elizabeth J

2018-01-15

Most students entering nursing programs today are members of Generation Y or the Millennial generation, and they learn differently than previous generations. Nurse educators must consider implementing innovative teaching strategies that appeal to the newest generation of learners. The Plan-Do-Study-Act cycle is a framework that can be helpful when planning, assessing, and continually improving teaching pedagogy. This article describes the use of iterative Plan-Do-Study-Act cycles to implement a change in teaching pedagogy.

Opportunities for Using Building Information Modeling to Improve Worker Safety Performance

Directory of Open Access Journals (Sweden)

Kasim Alomari

2017-02-01

Full Text Available Building information modelling (BIM enables the creation of a digital representation of a designed facility combined with additional information about the project attributes, performance criteria, and construction process. Users of BIM tools point to the ability to visualize the final design along with the construction process as a beneficial feature of using BIM. Knowing the construction process in relationship to a facility’s design benefits both safety professionals when planning worker safety measures for a project and designers when creating a project’s design. Success in using BIM to enhance safety partly depends on the familiarity of project personnel with BIM tools and the extent to which the tools can be used to identify and eliminate safety hazards. In a separate, ongoing study, the authors investigated the connection between BIM and safety to document the opportunities, barriers, and impacts. Utilizing an on-line survey of project engineers who work for construction firms together with a comprehensive literature review, the study found those who use BIM feel that it aids in communication of project information and project delivery, both of which have been found to have positive impacts on construction site safety. Further, utilizing the survey results, the authors apply the binary logistic regression econometric framework to better understand the factors that lead to safety professionals believing that BIM increases safety in the work place. In addition, according to the survey results, a large percentage of the engineers who use BIM feel that ultimately it helps to eliminate safety hazards and improve worker safety. The study findings suggest that improvements in safety performance across the construction industry may be due in part to increased use of BIM in the construction industry.

NPP Krsko core calculations to improve operational safety

International Nuclear Information System (INIS)

Ivekovic, I.; Grgic, D.; Nemec, T.

2007-01-01

Calculation tools and methodology used to perform independent calculations of cumulative influence of different changes related to fuel and core operation of NPP Krsko were described. Some examples of steady state and transient results are used to illustrate potential improvements to understanding and reviewing plant safety. (author)

Thermal-hydraulics technological strategy roadmap for LWR safety improvement and development

International Nuclear Information System (INIS)

Nakamura, Hideo; Arai, Kenji; Oikawa, Hirohide

2015-01-01

New version of the Thermal-Hydraulics Safety Evaluation Fundamental Technology Enhancement Strategy Roadmap (TH-RM) was developed by the Atomic Energy Society of Japan (AESJ) for LWR safety improvement and development. The 1st version of TH-RM was prepared in 2009 under collaboration of utilities, vendors, universities, research institutes and technical support organizations (TSO) for regulatory body. The revision was made by three sub-working groups (SWGs) by considering the lessons learned from the Fukushima Daiichi Accident. The 'safety assessment' SWG pursued development of computer codes for safety assessment. The 'fundamental technology' SWG pursued safety improvement and risk reduction via accident management (AM) measures by referring the technical map for severe accident (SA) established by the 'severe accident' SWG. Phenomena and components for counter-measures and/or proper prediction are identified by going through SA progression in both reactor and spent-fuel pool of PWR and BWR. Twelve important technology development subjects were identified, which include melt coolability enhancement to maintain integrity of containment vessel. Fact Sheet was developed to describe each of identified and selected R and D subjects. External hazards are also considered how to cope with from thermal-hydraulic safety point of view. This paper summarizes the revised TH-RM with several examples and future perspectives. (author)

Constructing a Bayesian network model for improving safety behavior of employees at workplaces.

Science.gov (United States)

Mohammadfam, Iraj; Ghasemi, Fakhradin; Kalatpour, Omid; Moghimbeigi, Abbas

2017-01-01

Unsafe behavior increases the risk of accident at workplaces and needs to be managed properly. The aim of the present study was to provide a model for managing and improving safety behavior of employees using the Bayesian networks approach. The study was conducted in several power plant construction projects in Iran. The data were collected using a questionnaire composed of nine factors, including management commitment, supporting environment, safety management system, employees' participation, safety knowledge, safety attitude, motivation, resource allocation, and work pressure. In order for measuring the score of each factor assigned by a responder, a measurement model was constructed for each of them. The Bayesian network was constructed using experts' opinions and Dempster-Shafer theory. Using belief updating, the best intervention strategies for improving safety behavior also were selected. The result of the present study demonstrated that the majority of employees do not tend to consider safety rules, regulation, procedures and norms in their behavior at the workplace. Safety attitude, safety knowledge, and supporting environment were the best predictor of safety behavior. Moreover, it was determined that instantaneous improvement of supporting environment and employee participation is the best strategy to reach a high proportion of safety behavior at the workplace. The lack of a comprehensive model that can be used for explaining safety behavior was one of the most problematic issues of the study. Furthermore, it can be concluded that belief updating is a unique feature of Bayesian networks that is very useful in comparing various intervention strategies and selecting the best one form them. Copyright © 2016 Elsevier Ltd. All rights reserved.

Design an optimum safety policy for personnel safety management - A system dynamic approach

International Nuclear Information System (INIS)

Balaji, P.

2014-01-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making

Design an optimum safety policy for personnel safety management - A system dynamic approach

Energy Technology Data Exchange (ETDEWEB)

Balaji, P. [The Glocal University, Mirzapur Pole, Delhi- Yamuntori Highway, Saharanpur 2470001 (India)

2014-10-06

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Design an optimum safety policy for personnel safety management - A system dynamic approach

Science.gov (United States)

Balaji, P.

2014-10-01

Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

Improvement of safety by analysis of costs and benefits of the system

OpenAIRE

T. Karkoszka; M. Andraczke

2011-01-01

Purpose: of the paper has been the assessment of the dependence between improvement of the implemented occupational health and safety management system and both minimization of costs connected with occupational health and safety assurance and optimization of real work conditions.Design/methodology/approach: used for the analysis has included definition of the occupational health and safety system with regard to the rules and tool allowing for occupational safety assurance in the organisationa...

Improving the safety of fresh fruit and vegetables

NARCIS (Netherlands)

Jongen, W.M.F.

2005-01-01

Fresh fruit and vegetables have been identified as a significant source of pathogens and chemical contaminants. As a result, there has been a wealth of research on identifying and controlling hazards at all stages in the supply chain. Improving the safety of fresh fruit and vegetables reviews this

Improving the safety of Ukrainian NPP to reach an internationally accepted level

International Nuclear Information System (INIS)

Bozhko, S.; Helske, J.; Janke, R.; Mayoral, C.

2013-01-01

This paper summarizes the safety status and the modernization progress of Ukrainian NPPs towards an internationally accepted level of safety. After a brief discussion of the concept of what is called an 'international accepted level' for new and operating NPPs, the status of Russian type WWER and in particular the Ukrainian NPPs is presented. Then, the performed investigations of the gaps between international accepted level and the original status of Ukrainian NPPs are presented. The safety objectives of the modernization programs, some examples of defence in depth improvements, and an overall view of the modernization programs of Ukrainian NPPs are produced. Then, few important safety improvements implemented at the oldest Ukrainian WWER-1000 South Ukraine-1 are given in more detail. Finally, a conclusion presents the current status on the way to fulfill the national safety targets and to reach an internationally accepted level for all the Ukrainian NPPs. The paper is followed by the slides of the presentation. (authors)

Patient Safety Culture and the Ability to Improve: A Proof of Concept Study on Hand Hygiene.

Science.gov (United States)

Caris, Martine G; Kamphuis, Pim G A; Dekker, Mireille; de Bruijne, Martine C; van Agtmael, Michiel A; Vandenbroucke-Grauls, Christina M J E

2017-11-01

OBJECTIVE To investigate whether the safety culture of a hospital unit is associated with the ability to improve. DESIGN Qualitative investigation of safety culture on hospital units following a before-and-after trial on hand hygiene. SETTING VU University Medical Center, a tertiary-care hospital in the Netherlands. METHODS With support from hospital management, we implemented a hospital-wide program to improve compliance. Over 2 years, compliance was measured through direct observation, twice before, and 4 times after interventions. We analyzed changes in compliance from baseline, and selected units to evaluate safety culture using a positive deviance approach: the hospital unit with the highest hand hygiene compliance and 2 units that showed significant improvement (21% and 16%, respectively) were selected as high performing. Another 2 units showed no improvement and were selected as low performing. A blinded, independent observer conducted interviews with unit management, physicians, and nurses, based on the Hospital Survey on Patient Safety Culture. Safety culture was categorized as pathological (lowest level), reactive, bureaucratic, proactive, or generative (highest level). RESULTS Overall, 3 units showed a proactive or generative safety culture and 2 units had bureaucratic or pathological safety cultures. When comparing compliance and interview results, high-performing units showed high levels of safety culture, while low-performing units showed low levels of safety culture. CONCLUSIONS Safety culture is associated with the ability to improve hand hygiene. Interventions may not be effective when applied in units with low levels of safety culture. Although additional research is needed to corroborate our findings, the safety culture on a unit can benefit from enhancement strategies such as team-building exercises. Strengthening the safety culture before implementing interventions could aid improvement and prevent nonproductive interventions. Infect Control

Progress toward international agreement to improve reactor safety

International Nuclear Information System (INIS)

Lieberman, J.I.; Graham, B.

1993-01-01

Representatives of nearly one-half of the 114 member states of the International Atomic Energy Agency (IAEA), including the United States, have participated in the development of an international nuclear safety conventions proposed multilateral treaty to improve civil nuclear power reactor safety. A preliminary draft of the convention has been developed (referred to as the draft convention for this report), but discussions are continuing, and when the final convention text will be completed and presented to IAEA member states for signature is uncertain. This report responds to the former and current Chairman's request that we provide information on the development of the nuclear safety convention, including a discussion of (1) the draft convention's scope and objectives, (2) how the convention will be implemented and monitored, (3) the views of selected country representatives on what provisions should be included in the draft convention, and (4) the convention's potential benefits and limitations

Do clinical safety charts improve paramedic key performance indicator results? (A clinical improvement programme evaluation).

Science.gov (United States)

Ebbs, Phillip; Middleton, Paul M; Bonner, Ann; Loudfoot, Allan; Elliott, Peter

2012-07-01

Is the Clinical Safety Chart clinical improvement programme (CIP) effective at improving paramedic key performance indicator (KPI) results within the Ambulance Service of New South Wales? The CIP intervention area was compared with the non-intervention area in order to determine whether there was a statistically significant improvement in KPI results. The CIP was associated with a statistically significant improvement in paramedic KPI results within the intervention area. The strategies used within this CIP are recommended for further consideration.

Improvement of Safety Features in Standard Operation Procedure of Tc-99m Generator

International Nuclear Information System (INIS)

Manisah Saedon; Mohd Khairul Hakimi; Shyen, A.K.S.

2011-01-01

This paper describes the improvements proposed to the original production procedures for Tc-99m generators. Improvements are intended to add safety and health features for workers into the existing procedures. The difference between the new safe work procedures from the original work procedures; is the concern about the safety and health of employees other than the product safety. One of the suggested safety characteristics is by using the visual aid so that the workers can easily see and read the procedures when they perform their duties, whereas the previous procedures are kept in the manual and difficult to access. The purpose of this paper is to share information about the importance of safety and health features for the workers in the procedures established in addition to provide awareness to all parties involved. (author)

A Safety and Health Guide for Vocational Educators. Incorporating Requirements of the Occupational Safety and Health Act of 1970, Relevant Pennsylvania Requirements with Particular Emphasis for Those Concerned with Cooperative Education and Work Study Programs. Volume 15. Number 1.

Science.gov (United States)

Wahl, Ray

Intended as a guide for vocational educators to incorporate the requirements of the Occupational Safety and Health Act (1970) and the requirements of various Pennsylvania safety and health regulations with their cooperative vocational programs, the first chapter of this document presents the legal implications of these safety and health…

The Influence of Teaching Methods on Learners' Perception of E-Safety

Science.gov (United States)

Šimandl, Václav; Dobiáš, Václav; Šerý, Michal

2017-01-01

Aim/Purpose: The traditional method of teaching e-safety by lecturing is not very effective. Despite learners often being equipped with the right knowledge, they reject the need to act accordingly. There is a need to improve the way digital e-safety is taught. Background: The study compares four different teaching styles, examining how each…

78 FR 19506 - National Boating Safety Advisory Council

Science.gov (United States)

2013-04-01

... teleconference and online webinar to discuss issues related to improving safety of recreational boating through... 19, 2013. ADDRESSES: The Subcommittee will meet via teleconference and online webinar. To participate... possible. Dated: Mar 26, 2013. David S. Fish, Captain, U.S. Coast Guard, Acting Director of Inspections and...

Organisational learning and continuous improvement of health and safety in certified manufacturers

DEFF Research Database (Denmark)

Granerud, Lise; Rocha, Robson Sø

2011-01-01

and raise goals within health and safety on a continuous basis. The article examines how certified occupational and health management systems influence this process to evaluate how far they hinder or support learning. It presents a model with which it is possible to identify and analyse improvement......Certified management systems have increasingly been applied by firms in recent decades and now cover the management of health and safety, principally through the OHSAS 18001 standard. In order to become certified, firms must not only observe the relevant legislation, but also improve performance...... processes. The model is applied to five cases from a qualitative study of Danish manufacturers with certified health and safety management systems. The cases illustrate the wide variation in health and safety management among certified firms. Certification is found to support lower levels of continuous...

Design of marine structures with improved safety for environment

International Nuclear Information System (INIS)

Klanac, Alan; Varsta, Petri

2011-01-01

The paper describes a method for design of marine structures with increased safety for environment, considering also the required investment costs as well as the aspects of risk distribution onto the maritime stakeholders. Practically, the paper seeks to answer what is the optimal amount that should be invested into certain safety measure for any given vessel. Due to the uneven distribution of risk, as well as the differing impact of costs emerging from safety improvements, stakeholders experience conflicting ranking of alternatives. To solve this multi-stakeholder decision-making problem, in which each stakeholder is a decision-maker, the method applies concepts of group decision-making theory, namely the Game Theory. The method fosters axiomatic definition of the optimum solution, arguing that the solution, or the final selected design, should satisfy the non-dominance, efficiency, and fairness. These three are thoroughly discussed in terms of structural design, especially the latter. Considering the coupling of environmental risk and structural design, the method also builds on the preference structure of four maritime stakeholders: yards, owners, oil receivers and the public, who either share the risks or directly influence structural design. Method is presented on a practical study of structural design of a tanker with a crashworthy side structure that is capable of reducing the risk of collision. The outcome of this study outlines a number of possibilities for successful improvement of tanker safety that can benefit, concurrently, all maritime stakeholders.

Bill C-5, an act to amend the radiation emitting devices act

International Nuclear Information System (INIS)

1984-01-01

This Act, entitled Bill C-5, allows for a series of amendments to the Radiation Emitting Devices Act. The amendments relate to regulations concerned with the sale, lease or import, labelling, advertising, packaging, safety standards and inspection of radiation emitting devices

Danish initiatives to improve the safety of meat products

DEFF Research Database (Denmark)

Wegener, Henrik Caspar

2010-01-01

and Campylobacter, and to a lesser extent Yersinia, Escherichia coli O157 and Listeria. Danish initiatives to improve the safety of meat products have focused on the entire production chain from the farm to the consumer, with a special emphasis on the pre-harvest stage of production. The control of bacterial......During the last two decades the major food safety problems in Denmark, as determined by the number of human patients, has been associated with bacterial infections stemming from meat products and eggs. The bacterial pathogens causing the majority of human infections has been Salmonella...

The association between event learning and continuous quality improvement programs and culture of patient safety.

Science.gov (United States)

Mazur, Lukasz; Chera, Bhishamjit; Mosaly, Prithima; Taylor, Kinley; Tracton, Gregg; Johnson, Kendra; Comitz, Elizabeth; Adams, Robert; Pooya, Pegah; Ivy, Julie; Rockwell, John; Marks, Lawrence B

2015-01-01

To present our approach and results from our quality and safety program and to report their possible impact on our culture of patient safety. We created an event learning system (termed a "good catch" program) and encouraged staff to report any quality or safety concerns in real time. Events were analyzed to assess the utility of safety barriers. A formal continuous quality improvement program was created to address these reported events and make improvements. Data on perceptions of the culture of patient safety were collected using the Agency for Health Care Research and Quality survey administered before, during, and after the initiatives. Of 560 good catches reported, 367 could be ascribed to a specific step on our process map. The calculated utility of safety barriers was highest for those embedded into the pretreatment quality assurance checks performed by physicists and dosimetrists (utility score 0.53; 93 of 174) and routine checks done by therapists on the initial day of therapy. Therapists and physicists reported the highest number of good catches (24% each). Sixty-four percent of events were caused by performance issues (eg, not following standardized processes, including suboptimal communications). Of 31 initiated formal improvement events, 26 were successfully implemented and sustained, 4 were discontinued, and 1 was not implemented. Most of the continuous quality improvement program was conducted by nurses (14) and therapists (7). Percentages of positive responses in the patient safety culture survey appear to have increased on all dimensions (p continuous quality improvement programs can be successfully implemented and that there are contemporaneous improvements in the culture of safety. Copyright © 2015 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

Assessment of freeway work zone safety with improved cellular automata model

Directory of Open Access Journals (Sweden)

Guohua Liang

2014-08-01

Full Text Available To accurately assess the safety of freeway work zones, this paper investigates the safety of vehicle lane change maneuvers with improved cellular automata model. Taking the traffic conflict and standard deviation of operating speed as the evaluation indexes, the study evaluates the freeway work zone safety. With improved deceleration probability in car-following raies and the addition of lanechanging rules under critical state, the lane-changing behavior under critical state is defined as a conflict count. Through 72 schemes of simulation runs, the possible states of the traffic flow are carefully studied. The results show that under the condition of constant saturation traffic conflict count and vehicle speed standard deviation reach their maximums when the mixed rate of heave vehicles is 40%. Meanwhile, in the case of constant heavy vehicles mix, traffic conflict count and vehicle speed standard deviation reach maximum values when saturation rate is 0. 75. Integrating ail simulation results, it is known the traffic safety in freeway work zones is classified into four levels : safe, relatively safe, relatively dangerous, and dangerous.

Applicaiton and characteristics of food irradiation on food safety

International Nuclear Information System (INIS)

Ha Yiming

2010-01-01

Irradiation is one of non-thermal processing technology. Physical, chemical and biology effects were induced by the interaction of ionization irradiation and materials and acting on materials or food, then, food molecular was modified by rays and the harmful substances in it degraded. Irradiation is an effective method to improve food safety and extend the shelf life of food. In the article, the status of food safety at home and abroad in recently years was summarized, and the characteristic and application areas of irradiation technology in food safety were synthetically analyzed. (author)

77 FR 33240 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2012-06-05

... Project water conservation best management practices that shall ``develop criteria for evaluating the... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The...

75 FR 70020 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2010-11-16

... office on Central Valley Project water conservation best management practices that shall ``* * * develop... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior ACTION: Notice of Availability. SUMMARY: The...

76 FR 12756 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2011-03-08

... office on Central Valley Project water conservation best management practices that shall ``* * * develop... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The...

77 FR 64544 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2012-10-22

... Central Valley Project water conservation best management practices that shall ``develop criteria for... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The...

Development and improvement of safety analysis code for geological disposal

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-08-15

In order to confirm the long-term safety concerning geological disposal, probabilistic safety assessment code and other analysis codes, which can evaluate possibility of each event and influence on engineered barrier and natural barrier by the event, were introduced. We confirmed basic functions of those codes and studied the relation between those functions and FEP/PID which should be taken into consideration in safety assessment. We are planning to develop 'Nuclide Migration Assessment System' for the purpose of realizing improvement in efficiency of assessment work, human error prevention for analysis, and quality assurance of the analysis environment and analysis work for safety assessment by using it. As the first step, we defined the system requirements and decided the system composition and functions which should be mounted in them based on those requirements. (author)

Continuous restraint control systems: safety improvement for various occupants

NARCIS (Netherlands)

Laan, E. van der; Jager, B. de; Veldpaus, F.; Steinbuch, M.; Nunen, E. van; Willemsen, D.

2009-01-01

Occupant safety can be significantly improved by continuous restraint control systems. These restraint systems adjust their configuration during the impact according to the actual operating conditions, such as occupant size, weight, occupant position, belt usage and crash severity. In this study,

Challenges in ensuring radiological safety and nuclear forensic for malicious acts involving nuclear and other radioactive material

International Nuclear Information System (INIS)

Sharma, Ranjit; Chatterjee, M.K.; Singh, Rajvir; Pradeepkumar, K.S.

2010-01-01

Nuclear and other radioactive materials may get smuggled into the country aimed at malicious acts. Radioactive material detected accidentally or during inspection at the entry points/national borders may indicate illicit trafficking for the purpose of nuclear/radiological terrorism. As country requires prevention and preparedness for response to these malicious acts, nuclear forensic techniques are to be developed incorporating radiological safety aspects. Nuclear forensics helps in determining the origin, intended use, legal owner and the smuggled route etc. by using fingerprinting as well as comparison with reference data. The suggested sequence of methods for analysis of radioactive material/samples will be radiological assessment, physical characterization, traditional forensic analysis, isotope analysis along with elemental/chemical analysis

Plan for research to improve the safety of light-water nuclear power plants

International Nuclear Information System (INIS)

1978-03-01

This is the U.S. Nuclear Regulatory Commission's first annual report to Congress on recommendations for research on improving the safety of light-water nuclear power plants. Suggestions for reactor safety research were identified in, or received from, various sources, including the Advisory Committee on Reactor Safeguards, the NRC regulatory staff, and the consultants to the Research Review Group. After an initial screening to eliminate those not related to improved reactor safety, all the suggestions were consolidated into research topics. It is recommended that the following research projects be carried out: alternate containment concepts, especially vented containments; alternate decay heat removal concepts, especially add-on bunkered systems; alternate emergency core cooling concepts; improved in-plant accident response; and advanced seismic designs

The Armstrong Institute: An Academic Institute for Patient Safety and Quality Improvement, Research, Training, and Practice.

Science.gov (United States)

Pronovost, Peter J; Holzmueller, Christine G; Molello, Nancy E; Paine, Lori; Winner, Laura; Marsteller, Jill A; Berenholtz, Sean M; Aboumatar, Hanan J; Demski, Renee; Armstrong, C Michael

2015-10-01

Academic medical centers (AMCs) could advance the science of health care delivery, improve patient safety and quality improvement, and enhance value, but many centers have fragmented efforts with little accountability. Johns Hopkins Medicine, the AMC under which the Johns Hopkins University School of Medicine and the Johns Hopkins Health System are organized, experienced similar challenges, with operational patient safety and quality leadership separate from safety and quality-related research efforts. To unite efforts and establish accountability, the Armstrong Institute for Patient Safety and Quality was created in 2011.The authors describe the development, purpose, governance, function, and challenges of the institute to help other AMCs replicate it and accelerate safety and quality improvement. The purpose is to partner with patients, their loved ones, and all interested parties to end preventable harm, continuously improve patient outcomes and experience, and eliminate waste in health care. A governance structure was created, with care mapped into seven categories, to oversee the quality and safety of all patients treated at a Johns Hopkins Medicine entity. The governance has a Patient Safety and Quality Board Committee that sets strategic goals, and the institute communicates these goals throughout the health system and supports personnel in meeting these goals. The institute is organized into 13 functional councils reflecting their behaviors and purpose. The institute works daily to build the capacity of clinicians trained in safety and quality through established programs, advance improvement science, and implement and evaluate interventions to improve the quality of care and safety of patients.

Nature-Based Strategies for Improving Urban Health and Safety.

Science.gov (United States)

Kondo, Michelle C; South, Eugenia C; Branas, Charles C

2015-10-01

Place-based programs are being noticed as key opportunities to prevent disease and promote public health and safety for populations at-large. As one key type of place-based intervention, nature-based and green space strategies can play an especially large role in improving health and safety for dwellers in urban environments such as US legacy cities that lack nature and greenery. In this paper, we describe the current understanding of place-based influences on public health and safety. We focus on nonchemical environmental factors, many of which are related to urban abandonment and blight. We then review findings from studies of nature-based interventions regarding impacts on health, perceptions of safety, and crime. Based on our findings, we suggest that further research in this area will require (1) refined measures of green space, nature, and health and safety for cities, (2) interdisciplinary science and cross-sector policy collaboration, (3) observational studies as well as randomized controlled experiments and natural experiments using appropriate spatial counterfactuals and mixed methods, and (4) return-on-investment calculations of potential economic, social, and health costs and benefits of urban greening initiatives.

Safety experiences in using cryogenic liquid in IGCAR

International Nuclear Information System (INIS)

Senthilkumar, B.; Singh, Dharmendra S.; Kandasamy, S.

2009-01-01

Indira Gandhi Centre for Atomic Research is engaged in large-scale development work in the field of Fast Reactor Technology associated fuel cycle facilities metallurgy and material science. To meet the growing demands of these activities, the cryogenic are manufactured, stored, and handled in the Centre. Lot of precautionary measures are taken during the plant operations. However, the safety of the men and machine can be ensured only by systematic safety studies. So this study was taken up to identify the hazards of cryogenic, unsafe acts/unsafe conditions and to improve the safety standards in the Centre

Legacy data sharing to improve drug safety assessment: the eTOX project

DEFF Research Database (Denmark)

Sanz, Ferran; Pognan, François; Steger-Hartmann, Thomas

2017-01-01

The sharing of legacy preclinical safety data among pharmaceutical companies and its integration with other information sources offers unprecedented opportunities to improve the early assessment of drug safety. Here, we discuss the experience of the eTOX project, which was established through...

78 FR 21414 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2013-04-10

... Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The following Water Management Plans are available for review... establish and administer an office on Central Valley Project water conservation best management practices...

78 FR 63491 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2013-10-24

... Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The following Water Management Plans are available for review: Westside... project contractors using best available cost-effective technology and best management practices.'' These...

76 FR 54251 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2011-08-31

... and administer an office on Central Valley Project water conservation best management practices that... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The...

75 FR 38538 - Central Valley Project Improvement Act, Water Management Plans

Science.gov (United States)

2010-07-02

... to establish and administer an office on Central Valley Project water conservation best management... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Central Valley Project Improvement Act, Water Management Plans AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of availability. SUMMARY: The...

Improved waste management services – Will the Act make a difference?

CSIR Research Space (South Africa)

Oelofse, Suzanna HH

2009-05-01

Full Text Available This document focuses on the improved waste management services and the Waste Act 59 of 2008. It provide in formation on the Integrated Waste Management Plans, technical capacity – infrastructure, the backlog in adequate service provision, the facts...

Air Force Personnel Can Improve Compliance With the Berry Amendment and Buy American Act

Science.gov (United States)

2016-02-24

leather, furs,6 apparel , and shoes • FSG 84 – clothing , individual equipment and insignia • FSG 89 – subsistence (food) If these items are purchased...during the audit by completing Buy American Act training and amending standard operating procedures and internal processes to improve compliance with the...Force Personnel Can Improve Compliance With the Berry Amendment and the Buy American Act F E B R U A R Y 2 4 , 2 0 1 6 Report No. DODIG-2016-051

Improvement of operational safety: The self-assessment at the Russian NPPs

International Nuclear Information System (INIS)

Kolotov, Aleksander

2002-01-01

The operating organization has scheduled for the forthcoming year to elaborate the NPP safety self-assessment standards and to settle precise criterion for its performance. Toward this end it was decided to form a Working Team including of NPP and VNIIAES representatives to elaborate major tasks on the self-assessment improvement, development and implementation of new documentation and training the personnel in new methodology. Actions developed by R osenergoatom , one of its items is the participation of 'Rosenergoatom' and VNIIAES representatives in the workshop, contains the sequence of Russian NPP safety self-assessment improvement at the first stage

Housing improvement and home safety Effectiveness Matters

OpenAIRE

, Crd; Sphr@, L; , MrcSphsu

2014-01-01

The homes we live in impact on health, wellbeing and health inequalities. Treating illnesses directly related to living in cold, damp and dangerous homes costs the NHS £2.5 billion per year. Ensuring affordable warmth through insulation and more efficient heating can improve health and wellbeing. Home safety assessment and modification can reduce falls and risk of falling in older people. Education, promotion of exercise and wearing of appropriate footwear, environmental modifications and tra...

Safety cases for the co-ordinated research project on improvement of safety assessment methodologies for near surface radioactive waste disposal facilities (ISAM)

International Nuclear Information System (INIS)

Kozak, M.W.; Torres-Vidal, C.; Kelly, E.; Guskov, A.; Blerk, J. van

2002-01-01

A Co-ordinated Research Project (CRP) has recently been completed on the Improvement of Safety Assessment Methodologies for Near-Surface Radioactive Waste Disposal Facilities (ISAM). A major aspect of the project was the use of safety cases for the practical application of safety assessment. An overview of the ISAM safety cases is given in this paper. (author)

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

Energy Technology Data Exchange (ETDEWEB)

Ualikhan Zhiyenbayev [KAIST, Daejeon (Korea, Republic of); Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether.

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

International Nuclear Information System (INIS)

Ualikhan Zhiyenbayev; Chung, Dae Wook

2015-01-01

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether

Safety: Preventive Medicine.

Science.gov (United States)

Kotula, John R.; Digenakis, Anthony

1985-01-01

Underscores the need for community colleges to practice safety within the institutions and to instruct students in workplace safety procedures and requirements. Reviews Occupational Safety and Health Act (OSHA) regulations and their impact on industry and education. Looks at the legal responsibilities of colleges for safety. (DMM)

Improved technical specifications and related improvements to safety in commercial Nuclear power plants

International Nuclear Information System (INIS)

Hoffman, D.R.; Demitrack, T.; Schiele, R.; Jones, J.C.

2004-01-01

Many of the commercial nuclear power plants in the United States (US) have been converting a portion of the plant operating license known as the Technical Specifications (TS) in accordance with a document published by the US Nuclear Regulatory Commission (NRC). The TS prescribe commercial nuclear power plant operating requirements. There are several types of nuclear power plants in the US, based on the technology of different vendors, and there is an NRC document that supports each of the five different vendor designs. The NRC documents are known as the Improved Standard Technical Specifications (ISTS) and are contained in a separate document (NUREG series) for each one of the designs. EXCEL Services Corporation (hereinafter EXCEL) has played a major role in the development of the ISTS and in the development, licensing, and implementation of the plant specific Improved Technical Specifications (ITS) (which is based on the ISTS) for the commercial nuclear power plants in the US that have elected to make this conversion. There are currently 103 operating commercial nuclear power plants in the US and 68 of them have successfully completed the conversion to the ITS and are now operating in accordance with their plant specific ITS. The ISTS is focused mainly on safety by ensuring the commercial nuclear reactors can safely shut down and mitigate the consequences of any postulated transient and accident. It accomplishes this function by including requirements directly associated with safety in a document structured systematically and taking into account some key human factors and technical initiatives. This paper discusses the ISTS including its format, content, and detail, the history of the ISTS, the ITS development, licensing, and implementation process, the safety improvements resulting from a plant conversion to ITS, and the importance of the ITS Project to the industry. (Author)

Improved technical specifications and related improvements to safety in commercial Nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Hoffman, D.R.; Demitrack, T.; Schiele, R.; Jones, J.C. [EXCEL Services Corporation, 11921 Rockville Pike, Suite 100, Rockville, MD 20852 (United States)]. e-mail: donaldh@excelservices.com

2004-07-01

Many of the commercial nuclear power plants in the United States (US) have been converting a portion of the plant operating license known as the Technical Specifications (TS) in accordance with a document published by the US Nuclear Regulatory Commission (NRC). The TS prescribe commercial nuclear power plant operating requirements. There are several types of nuclear power plants in the US, based on the technology of different vendors, and there is an NRC document that supports each of the five different vendor designs. The NRC documents are known as the Improved Standard Technical Specifications (ISTS) and are contained in a separate document (NUREG series) for each one of the designs. EXCEL Services Corporation (hereinafter EXCEL) has played a major role in the development of the ISTS and in the development, licensing, and implementation of the plant specific Improved Technical Specifications (ITS) (which is based on the ISTS) for the commercial nuclear power plants in the US that have elected to make this conversion. There are currently 103 operating commercial nuclear power plants in the US and 68 of them have successfully completed the conversion to the ITS and are now operating in accordance with their plant specific ITS. The ISTS is focused mainly on safety by ensuring the commercial nuclear reactors can safely shut down and mitigate the consequences of any postulated transient and accident. It accomplishes this function by including requirements directly associated with safety in a document structured systematically and taking into account some key human factors and technical initiatives. This paper discusses the ISTS including its format, content, and detail, the history of the ISTS, the ITS development, licensing, and implementation process, the safety improvements resulting from a plant conversion to ITS, and the importance of the ITS Project to the industry. (Author)

78 FR 69433 - Executive Order 13650 Improving Chemical Facility Safety and Security Listening Sessions

Science.gov (United States)

2013-11-19

... Chemical Facility Safety and Security Listening Sessions AGENCY: National Protection and Programs... from stakeholders on issues pertaining to Improving Chemical Facility Safety and Security (Executive... regulations, guidance, and policies; and identifying best practices in chemical facility safety and security...

Conception of transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel of power reactors, which meets the requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism

International Nuclear Information System (INIS)

Il'kaev, R.I.; Matveev, V.Z.; Morenko, A.I.; Shapovalov, V.I.; Semenov, A.G.; Sergeyev, V.M.; Orlov, V.K.; Shatalov, V.V.; Gotovchikov, V.T.; Seredenko, V.A.; Haire, Jonathan M.; Forsberg, C.W.

2004-01-01

The report is devoted to the problem of creation of a new generation of multi-purpose universal transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel (SNF) of power reactors, which meets all requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism. Meeting all IAEA requirements in terms of safety both in normal operation conditions and accidents, as well as increased stability of transport cask (TC) with SNF under the conditions of beyond-design-basis accidents and acts of terrorism has been achieved in the design of multi-purpose universal TC due to the use of DU (depleted uranium) in it. At that, it is suggested to use DU in TC, which acts as effective gamma shield and constructional material in the form of both metallic depleted uranium and metal-ceramic mixture (cermet), based on stainless or carbon steel and DU dioxide. The metal in the cermet is chosen to optimize cask performance. The use of DU in the design of multi-purpose universal TC enables getting maximum load of the container for spent nuclear fuel when meeting IAEA requirements in terms of safety and providing increased stability of the container with SNF under conditions of beyond-design-basis accident and acts of terrorism

Conception of transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel of power reactors, which meets the requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism

Energy Technology Data Exchange (ETDEWEB)

Il' kaev, R.I.; Matveev, V.Z.; Morenko, A.I.; Shapovalov, V.I. [Russian Federal Nuclear Center - All-Russian Research Inst. of Experimental Physics, Sarov (Russian Federation); Semenov, A.G.; Sergeyev, V.M.; Orlov, V.K. [All-Russian Research Inst. of Inorganic Materials, Moscow (Russian Federation); Shatalov, V.V.; Gotovchikov, V.T.; Seredenko, V.A. [All-Russian Research Inst. of Applied Chemistry, Moscow (Russian Federation); Haire, Jonathan M.; Forsberg, C.W. [Oak Ridge National Lab., Oak Ridge (United States)

2004-07-01

The report is devoted to the problem of creation of a new generation of multi-purpose universal transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel (SNF) of power reactors, which meets all requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism. Meeting all IAEA requirements in terms of safety both in normal operation conditions and accidents, as well as increased stability of transport cask (TC) with SNF under the conditions of beyond-design-basis accidents and acts of terrorism has been achieved in the design of multi-purpose universal TC due to the use of DU (depleted uranium) in it. At that, it is suggested to use DU in TC, which acts as effective gamma shield and constructional material in the form of both metallic depleted uranium and metal-ceramic mixture (cermet), based on stainless or carbon steel and DU dioxide. The metal in the cermet is chosen to optimize cask performance. The use of DU in the design of multi-purpose universal TC enables getting maximum load of the container for spent nuclear fuel when meeting IAEA requirements in terms of safety and providing increased stability of the container with SNF under conditions of beyond-design-basis accident and acts of terrorism.

Improving construction site safety through leader-based verbal safety communication.

Science.gov (United States)

Kines, Pete; Andersen, Lars P S; Spangenberg, Soren; Mikkelsen, Kim L; Dyreborg, Johnny; Zohar, Dov

2010-10-01

The construction industry is one of the most injury-prone industries, in which production is usually prioritized over safety in daily on-site communication. Workers have an informal and oral culture of risk, in which safety is rarely openly expressed. This paper tests the effect of increasing leader-based on-site verbal safety communication on the level of safety and safety climate at construction sites. A pre-post intervention-control design with five construction work gangs is carried out. Foremen in two intervention groups are coached and given bi-weekly feedback about their daily verbal safety communications with their workers. Foremen-worker verbal safety exchanges (experience sampling method, n=1,693 interviews), construction site safety level (correct vs. incorrect, n=22,077 single observations), and safety climate (seven dimensions, n=105 questionnaires) are measured over a period of up to 42 weeks. Baseline measurements in the two intervention and three control groups reveal that foremen speak with their workers several times a day. Workers perceive safety as part of their verbal communication with their foremen in only 6-16% of exchanges, and the levels of safety at the sites range from 70-87% (correct observations). Measurements from baseline to follow-up in the two intervention groups reveal that safety communication between foremen and workers increases significantly in one of the groups (factor 7.1 increase), and a significant yet smaller increase is found when the two intervention groups are combined (factor 4.6). Significant increases in the level of safety are seen in both intervention groups (7% and 12% increases, respectively), particularly in regards to 'access ways' and 'railings and coverings' (39% and 84% increases, respectively). Increases in safety climate are seen in only one of the intervention groups with respect to their 'attention to safety.' No significant trend changes are seen in the three control groups on any of the three measures

Survey on the implementation of the Occupational Health and Safety Act at an academic hospital in Johannesburg.

Science.gov (United States)

Foromo, Muraga R; Chabeli, Mary; Satekge, Mpho M

2016-09-28

Despite the available research findings, recommendations and the South African Occupational Health and Safety Act (OHSA) (Act 85 of 1993), there are still challenges with regard to the implementation of selected sections and regulations of the OHSA. This is evidenced by the occupational injuries and illness claims registered with the compensation fund (South Africa, Department of Labour 1993). To determine the extent to which the OHSA was implemented at an academic hospital in Johannesburg, from the senior professional nurses and nursing managers' perspective, and to describe recommendations in order to facilitate the implementation of the Act. A contextual, quantitative, exploratory and descriptive survey was conducted. A purposive sampling method was used to select the participants that met the inclusion criteria. A structured Likert-scale questionnaire was used to collect data (Brink 2011). Stata version 12 was used to analyse the data. Cronbach's alpha, with a cut-off point of 0.7 was used to test for internal consistency. Ethical considerations were strictly adhered to. Results are presented in the form of graphs, frequency distributions and tables. The study revealed that overall there is 93.3% non-implementation of the selected sections and regulations of the OHSA. These results have serious implications on the health and safety of employees in the workplace. The study recommends that the replication of the study should be conducted in order to determine the extent of implementation of the selected sections and regulations of the OHSA in other government institutions.

Performance improvement of the Annular Core Pulse Reactor for reactor safety experiments

International Nuclear Information System (INIS)

Reuscher, J.A.; Pickard, P.S.

1976-01-01

The Annular Core Pulse Reactor (ACPR) is a TRIGA type reactor which has been in operation at Sandia Laboratories since 1967. The reactor is utilized in a wide variety of experimental programs which include radiation effects, neutron radiography, activation analysis, and fast reactor safety. During the past several years, the ACPR has become an important experimental facility for the United States Fast Reactor Safety Research Program and questions of interest to the safety of the LMFBR are being addressed. In order to enhance the capabilities of the ACPR for reactor safety experiments, a project to improve the performance of the reactor was initiated. It is anticipated that the pulse fluence can be increased by a factor of 2.0 to 2.5 utilizing a two-region core concept with high heat capacity fuel elements around the central irradiation cavity. In addition, the steady-state power of the reactor will be increased by about a factor of two. The new features of the improvements are described

Evaluation of implementation an Integrated Safety and Preventive Maintenance System for Improving of Safety Indexes

Directory of Open Access Journals (Sweden)

I mohammadfam

2014-03-01

Full Text Available Accident analysis shows that one of the main reasons for accidents is non-integration of maintenance units with safety. Merging these two processes through an integrated system can reduce and or eliminate accidents, diseases, and environmental pollution. These issues lead to improvement in organizational performance, as well. The aim of this study is to design and establish an integrated system for obtaining the aforementioned goal. Integration was carried out at Nirou Moharreke Machine Tools Company via Structured System Analysis & Design Method (SSADM. In order to measure the effectiveness of the system, selected indexes were compared using statistical methods prior and after system establishment. Results show that the accident severity index reduced from 135.46 in 2010, to 43.85 in 2012. Moreover, system effectiveness improved equipment reliability and availability (e.g. reliability of the Pfeiffer Milling machine (P (t>50 increased from 0.89 in 2010, to 0.9 in 2012. This system by forecasting various failures, and planning and designing the required operations for preventing occurrence of these failures, plays an important role in improving safety conditions of equipment, and increasing organizational performance, and is capable of presenting an excellent accident prevention program.

A simple intervention to improve patient safety, save time and improve staff experience in the AMU procedure room.

Science.gov (United States)

Misselbrook, Gary Peter; Kause, Juliane; Yeoh, Su-Ann

2016-01-01

Over the last decade, operating theatres and Intensive Care Units (ICUs) have established systematic methods for performing procedures on patients that have been shown to reduce complications and improve patient safety. Whilst the use of procedure rooms on Acute Medicine Units (AMUs) is highly recommended by patient safety groups and Royal College publications, they are not universally available or appropriately utilised. In this article we discuss a quality improvement project that was undertaken on an AMU at a large university teaching hospital in the United Kingdom, highlighting its successes and challenges.

Navigating towards improved surgical safety using aviation-based strategies.

Science.gov (United States)

Kao, Lillian S; Thomas, Eric J

2008-04-01

Safety practices in the aviation industry are being increasingly adapted to healthcare in an effort to reduce medical errors and patient harm. However, caution should be applied in embracing these practices because of limited experience in surgical disciplines, lack of rigorous research linking these practices to outcome, and fundamental differences between the two industries. Surgeons should have an in-depth understanding of the principles and data supporting aviation-based safety strategies before routinely adopting them. This paper serves as a review of strategies adapted to improve surgical safety, including the following: implementation of crew resource management in training operative teams; incorporation of simulation in training of technical and nontechnical skills; and analysis of contributory factors to errors using surveys, behavioral marker systems, human factors analysis, and incident reporting. Avenues and challenges for future research are also discussed.

Using a Training Video to Improve Agricultural Workers' Knowledge of On-Farm Food Safety

Science.gov (United States)

Mathiasen, Lisa; Morley, Katija; Chapman, Benjamin; Powell, Douglas

2012-01-01

A training video was produced and evaluated to assess its impact on the food safety knowledge of agricultural workers. Increasing food safety knowledge on the farm may help to improve the safety of fresh produce. Surveys were used to measure workers' food safety knowledge before and after viewing the video. Focus groups were used to determine…

Augmented reality for improved safety

CERN Multimedia

Stefania Pandolfi

2016-01-01

Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

Variable Speed Limits: Strategies to Improve Safety and Traffic Parameters for a Bottleneck

Directory of Open Access Journals (Sweden)

M. Z. Hasanpour

2017-04-01

Full Text Available The primary purpose of the speed limit system is to enforce reasonable and safe speed. To reduce secondary problems such as accidents and queuing, Variable Speed Limits (VSL has been suggested. In this paper VSL is used to better safety and traffic parameters. Traffic parameters including speed, queue length and stopping time have been pondering. For VLS, an optimization decision tree algorithm with the function of microscopic simulation was used. The results in case of sub saturated, saturated and supersaturated at a bottleneck are examined and compared with the Allaby logic tree. The results show that the proposed decision tree shows an improved performance in terms of safety and comfort along the highway. The VSL pilot project is part of the Road Safety Improvement Program included in Iran’s road safety action plan that is in the research process in the BHRC Research Institute, Road and Housing & Urban Development Research that is planned for next 10-year Transportation safety view Plan.

National plan to enhance aviation safety through human factors improvements

Science.gov (United States)

Foushee, Clay

1990-01-01

The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

Critical roles of orthopaedic surgeon leadership in healthcare systems to improve orthopaedic surgical patient safety.

Science.gov (United States)

Kuo, Calvin C; Robb, William J

2013-06-01

The prevention of medical and surgical harm remains an important public health problem despite increased awareness and implementation of safety programs. Successful introduction and maintenance of surgical safety programs require both surgeon leadership and collaborative surgeon-hospital alignment. Documentation of success of such surgical safety programs in orthopaedic practice is limited. We describe the scope of orthopaedic surgical patient safety issues, define critical elements of orthopaedic surgical safety, and outline leadership roles for orthopaedic surgeons needed to establish and sustain a culture of safety in contemporary healthcare systems. We identified the most common causes of preventable surgical harm based on adverse and sentinel surgical events reported to The Joint Commission. A comprehensive literature review through a MEDLINE(®) database search (January 1982 through April 2012) to identify pertinent orthopaedic surgical safety articles found 14 articles. Where gaps in orthopaedic literature were identified, the review was supplemented by 22 nonorthopaedic surgical references. Our final review included 36 articles. Six important surgical safety program elements needed to eliminate preventable surgical harm were identified: (1) effective surgical team communication, (2) proper informed consent, (3) implementation and regular use of surgical checklists, (4) proper surgical site/procedure identification, (5) reduction of surgical team distractions, and (6) routine surgical data collection and analysis to improve the safety and quality of surgical patient care. Successful surgical safety programs require a culture of safety supported by all six key surgical safety program elements, active surgeon champions, and collaborative hospital and/or administrative support designed to enhance surgical safety and improve surgical patient outcomes. Further research measuring improvements from such surgical safety systems in orthopaedic care is needed.

Using game technologies to improve the safety of construction plant operations.

Science.gov (United States)

Guo, Hongling; Li, Heng; Chan, Greg; Skitmore, Martin

2012-09-01

Many accidents occur world-wide in the use of construction plant and equipment, and safety training is considered by many to be one of the best approaches to their prevention. However, current safety training methods/tools are unable to provide trainees with the hands-on practice needed. Game technology-based safety training platforms have the potential to overcome this problem in a virtual environment. One such platform is described in this paper - its characteristics are analysed and its possible contribution to safety training identified. This is developed and tested by means of a case study involving three major pieces of construction plant, which successfully demonstrates that the platform can improve the process and performance of the safety training involved in their operation. This research not only presents a new and useful solution to the safety training of construction operations, but illustrates the potential use of advanced technologies in solving construction industry problems in general. Copyright © 2011 Elsevier Ltd. All rights reserved.

Evaluating the Effectiveness of Two Teaching Strategies to Improve Nursing Students' Knowledge, Skills, and Attitudes About Quality Improvement and Patient Safety.

Science.gov (United States)

Maxwell, Karen L; Wright, Vivian H

The purpose of this study was to evaluate two teaching strategies with regard to quality and safety education for nurses content on quality improvement and safety. Two groups (total of 64 students) participated in online learning or online learning in conjunction with a flipped classroom. A pretest/posttest control group design was used. The use of online modules in conjunction with the flipped classroom had a greater effect on increasing nursing students' knowledge of quality improvement than the use of online modules only. There was no statistically significant difference between the groups for safety.

Using human factors engineering to improve patient safety in the cardiovascular operating room.

Science.gov (United States)

Gurses, Ayse P; Martinez, Elizabeth A; Bauer, Laura; Kim, George; Lubomski, Lisa H; Marsteller, Jill A; Pennathur, Priyadarshini R; Goeschel, Chris; Pronovost, Peter J; Thompson, David

2012-01-01

Despite significant medical advances, cardiac surgery remains a high risk procedure. Sub-optimal work system design characteristics can contribute to the risks associated with cardiac surgery. However, hazards due to work system characteristics have not been identified in the cardiovascular operating room (CVOR) in sufficient detail to guide improvement efforts. The purpose of this study was to identify and categorize hazards (anything that has the potential to cause a preventable adverse patient safety event) in the CVOR. An interdisciplinary research team used prospective hazard identification methods including direct observations, contextual inquiry, and photographing to collect data in 5 hospitals for a total 22 cardiac surgeries. We performed thematic analysis of the qualitative data guided by a work system model. 60 categories of hazards such as practice variations, high workload, non-compliance with evidence-based guidelines, not including clinicians' in medical device purchasing decisions were found. Results indicated that hazards are common in cardiac surgery and should be eliminated or mitigated to improve patient safety. To improve patient safety in the CVOR, efforts should focus on creating a culture of safety, increasing compliance with evidence based infection control practices, improving communication and teamwork, and designing better tools and technologies through partnership among all stakeholders.

Annual report on the administration of the Radiation Control for Health and Safety Act of 1968, Public Law 90-602, (1988), April 1, 1989. Annual report

International Nuclear Information System (INIS)

1989-01-01

The Secretary of Health and Human Services is required by Subpart 3, Part F of Title III of the Public Health Service Act; 42 USC 263b et seq. (Public Law 90-602) to submit an annual report to the President for transmittal to the Congress on or before April 1 on the administration of the Radiation Control for Health and Safety Act. The detailed information required in the report is outlined in Section 360D of the Public Health Service Act. The Food and Drug Administration, through its Center for Devices and Radiological Health, is responsible for the day-to-day administration of the Radiation Control for Health and Safety Act of 1968. The report provides a summary of the operations of the Center in carrying out that responsibility for calendar year 1988. In reviewing the operations of the Center for Devices and Radiological Health as reported in the document, it should be kept in mind that the day-to-day administration of the Act is only part of the Center's function. Other responsibilities include the administration and enforcement of the 1976 Medical Device Amendments to the Federal Food, Drug, and Cosmetic Act (not covered in the report)

Fire safety improvement of para-aramid fiber in thermoplastic polyurethane elastomer

International Nuclear Information System (INIS)

Chen, Xilei; Wang, Wenduo; Li, Shaoxiang; Jiao, Chuanmei

2017-01-01

Highlights: • Fire safety of para-aramid fiber on TPU has been investigated. • Para-aramid fiber has excellent flame retardant abilities and smoke suppression properties on TPU. • A new technique to improve the fire safety polymer is provided in this article. - Abstract: This article mainly studied fire safety effects of para-aramid fiber (AF) in thermoplastic polyurethane (TPU). The TPU/AF composites were prepared by molten blending method, and then the fire safety effects of all TPU composites were tested using cone calorimeter test (CCT), microscale combustion colorimeter test (MCC), smoke density test (SDT), and thermogravimetric/fourier transform infrared spectroscopy (TG-IR). The CCT test showed that AF could improve the fire safety of TPU. Remarkably, the peak value of heat release rate (pHRR) and the peak value of smoke production rate (pSPR) for the sample with 1.0 wt% content of AF were decreased by 52.0% and 40.5% compared with pure TPU, respectively. The MCC test showed that the HRR value of AF-2 decreased by 27.6% compared with pure TPU. TG test showed that AF promoted the char formation in the degradation process of TPU; as a result the residual carbon was increased. The TG-IR test revealed that AF had increased the thermal stability of TPU at the beginning and reduced the release of CO_2 with the decomposition going on. Through the analysis of the results of this experiment, it will make a great influence on the study of the para-aramid fiber in the aspect of fire safety of polymer.

Fire safety improvement of para-aramid fiber in thermoplastic polyurethane elastomer

Energy Technology Data Exchange (ETDEWEB)

Chen, Xilei; Wang, Wenduo; Li, Shaoxiang; Jiao, Chuanmei, E-mail: jiaochm@qust.edu.cn

2017-02-15

Highlights: • Fire safety of para-aramid fiber on TPU has been investigated. • Para-aramid fiber has excellent flame retardant abilities and smoke suppression properties on TPU. • A new technique to improve the fire safety polymer is provided in this article. - Abstract: This article mainly studied fire safety effects of para-aramid fiber (AF) in thermoplastic polyurethane (TPU). The TPU/AF composites were prepared by molten blending method, and then the fire safety effects of all TPU composites were tested using cone calorimeter test (CCT), microscale combustion colorimeter test (MCC), smoke density test (SDT), and thermogravimetric/fourier transform infrared spectroscopy (TG-IR). The CCT test showed that AF could improve the fire safety of TPU. Remarkably, the peak value of heat release rate (pHRR) and the peak value of smoke production rate (pSPR) for the sample with 1.0 wt% content of AF were decreased by 52.0% and 40.5% compared with pure TPU, respectively. The MCC test showed that the HRR value of AF-2 decreased by 27.6% compared with pure TPU. TG test showed that AF promoted the char formation in the degradation process of TPU; as a result the residual carbon was increased. The TG-IR test revealed that AF had increased the thermal stability of TPU at the beginning and reduced the release of CO{sub 2} with the decomposition going on. Through the analysis of the results of this experiment, it will make a great influence on the study of the para-aramid fiber in the aspect of fire safety of polymer.

Implementing the Comprehensive Unit-Based Safety Program (CUSP) to Improve Patient Safety in an Academic Primary Care Practice.

Science.gov (United States)

Pitts, Samantha I; Maruthur, Nisa M; Luu, Ngoc-Phuong; Curreri, Kimberly; Grimes, Renee; Nigrin, Candace; Sateia, Heather F; Sawyer, Melinda D; Pronovost, Peter J; Clark, Jeanne M; Peairs, Kimberly S

2017-11-01

While there is growing awareness of the risk of harm in ambulatory health care, most patient safety efforts have focused on the inpatient setting. The Comprehensive Unit-based Safety Program (CUSP) has been an integral part of highly successful safety efforts in inpatient settings. In 2014 CUSP was implemented in an academic primary care practice. As part of CUSP implementation, staff and clinicians underwent training on the science of safety and completed a two-question safety assessment survey to identify safety concerns in the practice. The concerns identified by team members were used to select two initial safety priorities. The impact of CUSP on safety climate and teamwork was assessed through a pre-post comparison of results on the validated Safety Attitudes Questionnaire. Ninety-six percent of staff completed science of safety training as part of CUSP implementation, and 100% of staff completed the two-question safety assessment. The most frequently identified safety concerns were related to medications (n = 11, 28.2), diagnostic testing (n = 9, 25), and communication (n = 5, 14). The CUSP team initially prioritized communication and infection control, which led to standardization of work flows within the practice. Six months following CUSP implementation, large but nonstatistically significant increases were found for the percentage of survey respondents who reported knowledge of the proper channels for questions about patient safety, felt encouraged to report safety concerns, and believed that the work setting made it easy to learn from the errors of others. CUSP is a promising tool to improve safety climate and to identify and address safety concerns within ambulatory health care. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

The basic discussion on nuclear power safety improvement based on nuclear equipment design

International Nuclear Information System (INIS)

Zhao Feiyun; Yao Yangui; Yu Hao; He Yinbiao; Gao Lei; Yao Weida

2013-01-01

The safety of strengthening nuclear power design was described based on nuclear equipment design after Fukushima nuclear accident. From these aspects, such as advanced standard system, advanced design method, suitable test means, consideration of beyond design basis event, and nuclear safety culture construction, the importance of nuclear safety improvement was emphatically presented. The enlightenment was given to nuclear power designer. (authors)

No 592 - Radiation Act

International Nuclear Information System (INIS)

1991-01-01

This Act will enter into force on 1 January 1992. The scope of the Act is extensive as, in addition to ionizing radiation, it will also apply to activities involving exposure to natural radiation and non-ionizing radiation. Its purpose is to prevent and restrict harmful effects to health resulting from radiation. The basic principles of the Act are that the practice involving radiation should be justified; radiation protection should be optimized; and radiation doses should be as low as reasonably achievable. Licensed organisations using radiation will be responsible for the safety of the activity involving exposure to radiation and for having available the appropriate expertise to this effect. The required so-called safety licence provides the regulatory control to ensure that radiation is used sensibly, that the equipment and shields are technically acceptable and the operating personnel is competent, and that the radioactive waste is dealt with appropriately. The Radiation Act will also apply to nuclear activities within the scope of the 1987 Nuclear Energy Act [fr

Standardization and improvement of safety for radioisotope equipped instruments

International Nuclear Information System (INIS)

Sumi, Tetsuo

1980-01-01

The safety for radioisotope-equipped instruments is considered. The one is the safety for the source assembly. The radioisotopes employed for radioisotope-equipped instruments are sealed sources which are used in the state of being contained in the enclosures. Many of the enclosures are provided with shutter mechanism for the purpose of emitting radiation only during the period required. If the possible troubles that might lead to the accidents are sampled out of the results of field operation of radiation instruments, and the safety measures for source enclosures are considered in connection with these troubles, it is no exaggeration to say that the safety for source enclosures has been maintained by preventing the critical accidents by the management of users and the cooperation of manufactures though there were the chance for investigating the safety in the common field and the establishment of JIS Z 4614 standard. Another consideration is concerned with the measures to improve the safety. No accident in the past never guarantees no accident in the future. Accumulation of experience is most effective for those measures, and the more experiences the better. It may be most effective that the manufacturers disclose their experiences each other from the wide outlook overcoming the barrier of trade secret. Fortunately, such consciousness has risen since a few years ago, and the investigation group is doing the works in the Japan Radioisotope Association. On the other hand, the reasonable revision of the radiation injury prevention law is desired. (Wakatsuki, Y.)

Review of Risk Reduction Methods using Probabilistic Safety Assessment Insights and Improved Technology

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun-Chan; Choi, Byung-Pil [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

2016-10-15

As seen in the process of the periodic safety review of domestic nuclear power plants, the risk management objectives such as core damage frequency and large early release frequency are not easy to be met without continuous safety improvements and the integratoin of the improved technologies into the PSA evaluation methodologies. Because external event analyses have a protion of uncertainty factors in the current analysis methodologies, the technical efforts in various perspectives.

Safety improvements at Canadian nuclear power plants in the aftermath of Fukushima accident

International Nuclear Information System (INIS)

Rzentkowski, G.; Khouaja, H.

2014-01-01

This paper describes the safety review of operating nuclear power plants undertaken by the Canadian Nuclear Safety Commission in light of the March 11, 2011 accident at the Fukushima Daiichi Nuclear Power Plants (NPPs). The review confirmed that the Canadian NPPs are robust and have a strong design relying on multiple layers of defence to protect the public from credible external events. Nevertheless, in the spirit of continuous safety improvements, the review identified a number of recommendations to further strengthen reactor defence-in-depth in preventing and mitigating the consequences of beyond design basis accidents, enhance onsite and offsite emergency response, and improve the CNSC regulatory framework. Progress achieved to date, in implementing these measures, is described in this paper along with a summary of safety benefits for each level of the reactor defence-in-depth. (author)

Safety improvements at Canadian nuclear power plants in the aftermath of Fukushima accident

Energy Technology Data Exchange (ETDEWEB)

Rzentkowski, G.; Khouaja, H. [Canadian Nuclear Safety Commission, Ottawa, ON (Canada)

2014-07-01

This paper describes the safety review of operating nuclear power plants undertaken by the Canadian Nuclear Safety Commission in light of the March 11, 2011 accident at the Fukushima Daiichi Nuclear Power Plants (NPPs). The review confirmed that the Canadian NPPs are robust and have a strong design relying on multiple layers of defence to protect the public from credible external events. Nevertheless, in the spirit of continuous safety improvements, the review identified a number of recommendations to further strengthen reactor defence-in-depth in preventing and mitigating the consequences of beyond design basis accidents, enhance onsite and offsite emergency response, and improve the CNSC regulatory framework. Progress achieved to date, in implementing these measures, is described in this paper along with a summary of safety benefits for each level of the reactor defence-in-depth. (author)

ABB engagement in efforts to improve the safety of RBMK reactors

International Nuclear Information System (INIS)

Tiren, L.I.; Bioere, S.; Molin, J.

1993-01-01

ABB Atom is engaged in safety analysis for the Ignalinsk (RBMK) nuclear power plant. The analysis is done within the framework of two different initiatives of the Swedish Nuclear Power Inspectorate, namely: probabilistic safety assessment, i.e. the BARSELINA project, and analysis of containment safety issues. The aim is to enable decisions to be made for specific hardware modifications. The following items were considered by the Swedish Nuclear Power Inspectorate to be the most significant with regard to safety and were thus selected for further study or action: nondestructive testing of primary system components, fire and flooding protection, pressure relief from the reactor cavity in certain accident sequences, Accident Localization System improvements, and a separate auxiliary feedwater system. (Z.S.) 1 fig

Occupational Health and Safety ACT NO. 6331 and Status Assessment in this Perspective, the Role of ÇASGEM at Education and Research

OpenAIRE

Karaman, Esra

2015-01-01

In this study, basic knowledge of Occupational Health and Safety Act No. 6331 and in this regard legal rights and obligations of employers and employees was given. It was informed with this study health and safety problems originated from work, often experienced occupational accidents and occupational diseases and provided information about their causes. It was referred Labour and Social Security Training and Research Centre ( ÇASGEM ) 's missions and conducted education and research on ...

Safety margins in older adults increase with improved control of a dynamic object

Science.gov (United States)

Hasson, Christopher J.; Sternad, Dagmar

2014-01-01

Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence, errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or also an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: (1) When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. (2) Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly 2 s. The accuracy and precision of the timing error quantified skill, and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older adults. PMID:25071566

Safety Margins in Older Adults Increase with Improved Control of a Dynamic Object

Directory of Open Access Journals (Sweden)

Christopher James Hasson

2014-07-01

Full Text Available Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, however demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: 1 When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. 2 Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly two seconds. The accuracy and precision of the timing error quantified skill and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older

Labor-Management Cooperation in Illinois: How a Joint Union Company Team Is Improving Facility Safety.

Science.gov (United States)

Mahan, Bruce; Maclin, Reggie; Ruttenberg, Ruth; Mundy, Keith; Frazee, Tom; Schwartzkopf, Randy; Morawetz, John

2018-01-01

This study of Afton Chemical Corporation's Sauget facility and its International Chemical Workers Union Council (ICWUC) Local 871C demonstrates how significant safety improvements can be made when committed leadership from both management and union work together, build trust, train the entire work force in U.S. Occupational Safety and Health Administration 10-hour classes, and communicate with their work force, both salaried and hourly. A key finding is that listening to the workers closest to production can lead to solutions, many of them more cost-efficient than top-down decision-making. Another is that making safety and health an authentic value is hard work, requiring time, money, and commitment. Third, union and management must both have leadership willing to take chances and learn to trust one another. Fourth, training must be for everyone and ongoing. Finally, health and safety improvements require dedicated funding. The result was resolution of more than one hundred safety concerns and an ongoing institutionalized process for continuing improvement.

Integrating Quality and Safety Competencies to Improve Outcomes: Application in Infusion Therapy Practice.

Science.gov (United States)

Sherwood, Gwen; Nickel, Barbara

Despite intense scrutiny and process improvement initiatives, patient harm continues to occur in health care with alarming frequency. The Quality and Safety Education for Nursing (QSEN) project provides a roadmap to transform nursing by integrating 6 competencies: patient-centered care, teamwork and collaboration, evidence-based practice, quality improvement, safety, and informatics. As front-line caregivers, nurses encounter inherent risks in their daily work. Infusion therapy is high risk with multiple potential risks for patient harm. This study examines individual and system application of the QSEN competencies and the Infusion Nurses Society's 2016 Infusion Therapy Standards of Practice in the improvement of patient outcomes.

Healing Arts Radiation Protection Act

International Nuclear Information System (INIS)

1984-07-01

The Healing Arts Radiation Protection Act is concerned with regulating the registration, installation, operation, inspection and safety of X-ray machines. The Act provides for the establishment of the Healing Arts Radiation Protection Commission which is responsible for reporting on all the above matters to the Ontario Minister of Health. In addition the board is responsible for the continuing development of an X-ray safety code and for the submission of an annual report of their activities to the minister

Participatory approach to improving safety, health and working conditions in informal economy workplaces in Cambodia.

Science.gov (United States)

Kawakami, Tsuyoshi; Tong, Leng; Kannitha, Yi; Sophorn, Tun

2011-01-01

The present study aimed to improve safety and health in informal economy workplaces such as home workplaces, small construction sites, and rural farms in Cambodia by using "participatory" approach. The government, workers' and employers' organizations and NGOs jointly assisted informal economy workers in improving safety and health by using participatory training methodologies. The steps taken were: (1) to collect existing good practices in safety and health in Cambodia; (2) to develop new participatory training programmes for home workers and small construction sites referring to ILO's WISE training programme, and (3) to train government officers, workers, employers and NGOs as safety and health trainers. The participatory training programmes developed consisted of action-checklists associated with illustrations, good example photo sheets, and texts explaining practical, low-cost improvement measures. The established safety and health trainers reached many informal economy workers through their human networks, and trained them by using the developed participatory training programmes. More than 3,000 informal economy workers were trained and they implemented improvements by using low-cost methods. Participatory training methodologies and active cooperation between the government, workers, employers and NGOs made it possible to provide practical training for those involved in the informal economy workplaces.

Applying different quality and safety models in healthcare improvement work: Boundary objects and system thinking

International Nuclear Information System (INIS)

Wiig, Siri; Robert, Glenn; Anderson, Janet E.; Pietikainen, Elina; Reiman, Teemu; Macchi, Luigi; Aase, Karina

2014-01-01

A number of theoretical models can be applied to help guide quality improvement and patient safety interventions in hospitals. However there are often significant differences between such models and, therefore, their potential contribution when applied in diverse contexts. The aim of this paper is to explore how two such models have been applied by hospitals to improve quality and safety. We describe and compare the models: (1) The Organizing for Quality (OQ) model, and (2) the Design for Integrated Safety Culture (DISC) model. We analyze the theoretical foundations of the models, and show, by using a retrospective comparative case study approach from two European hospitals, how these models have been applied to improve quality and safety. The analysis shows that differences appear in the theoretical foundations, practical approaches and applications of the models. Nevertheless, the case studies indicate that the choice between the OQ and DISC models is of less importance for guiding the practice of quality and safety improvement work, as they are both systemic and share some important characteristics. The main contribution of the models lay in their role as boundary objects directing attention towards organizational and systems thinking, culture, and collaboration

July 2011 Memorandum: Improving EPA Review of Appalachian Surface Coal Mining Operations Under the Clean Water Act, National Environmental Policy Act, and the Environmental Justice Executive Order

Science.gov (United States)

Memorandum: Improving EPA Review of Appalachian Surface Coal Mining Operations Under the Clean Water Act, National Environmental Policy Act, and the Environmental Justice Executive Order, July 21, 2011

21 CFR 1000.15 - Examples of electronic products subject to the Radiation Control for Health and Safety Act of 1968.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Examples of electronic products subject to the Radiation Control for Health and Safety Act of 1968. 1000.15 Section 1000.15 Food and Drugs FOOD AND DRUG... electromagnetic radiation include: Ultraviolet: Biochemical and medical analyzers. Tanning and therapeutic lamps...

Organisational readiness: exploring the preconditions for success in organisation-wide patient safety improvement programmes.

Science.gov (United States)

Burnett, Susan; Benn, Jonathan; Pinto, Anna; Parand, Anam; Iskander, Sandra; Vincent, Charles

2010-08-01

Patient safety has been high on the agenda for more than a decade. Despite many national initiatives aimed at improving patient safety, the challenge remains to find coherent and sustainable organisation-wide safety-improvement programmes. In the UK, the Safer Patients' Initiative (SPI) was established to address this challenge. Important in the success of such an endeavour is understanding 'readiness' at the organisational level, identifying the preconditions for success in this type of programme. This article reports on a case study of the four NHS organisations participating in the first phase of SPI, examining the perceptions of organisational readiness and the relationship of these factors with impact by those actively involved in the initiative. A mixed-methods design was used, involving a survey and semistructured interviews with senior executive leads, the principal SPI programme coordinator and the four operational leads in each of the SPI clinical work areas in all four organisations taking part in the first phase of SPI. This preliminary work would suggest that prior to the start of organisation-wide quality- and safety-improvement programmes, organisations would benefit from an assessment of readiness with time spent in the preparation of the organisational infrastructure, processes and culture. Furthermore, a better understanding of the preconditions that mark an organisation as ready for improvement work would allow policymakers to set realistic expectations about the outcomes of safety campaigns.

Using standardized insulin orders to improve patient safety in a tertiary care centre.

Science.gov (United States)

Doyle, Mary-Anne; Brez, Sharon; Sicoli, Silvana; De Sousa, Filomena; Keely, Erin; Malcom, Janine C

2014-04-01

To standardize insulin prescribing practices for inpatients, improve management of hypoglycemia, reduce reliance on sliding scales, increase use of basal-bolus insulin and improve patient safety. Patients with diabetes were admitted to 2 pilot inpatient units followed by corporate spread to all insulin-treated patients on noncritical care units in a Canadian tertiary care multicampus teaching hospital. Standardized preprinted insulin and hypoglycemia management orders, decision support tools and multidisciplinary education strategies were developed, tested and implemented by way of the Model for Improvement and The Ottawa Model for Research Process. Clinical and balance measures were evaluated through statistical process control. Patient safety was improved through a reduction in hypoglycemia and decreased dependence on correctional scales. Utilization of the preprinted orders approached the target of 70% at the end of the test period and was sustained at 89% corporately 3 years post-implementation. The implementation of a standardized, preprinted insulin order set facilitates best practices for insulin therapy, improves patient safety and is highly supported by treating practitioners. The utilization of formal quality-improvement methodology promoted efficiency, enhanced sustainability, increased support among clinicians and senior administrators, and was effective in instituting sustained practice change in a complex care centre. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

78 FR 55257 - Patient Safety and Quality Improvement: Civil Money Penalty Inflation Adjustment

Science.gov (United States)

2013-09-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Patient Safety and Quality Improvement: Civil Money... Civil Rights has determined that an adjustment to the maximum civil money penalty amount for violations... confidentiality and privilege protections of Patient Safety Work Product (PSWP), and procedures for enforcement...

Identification of protective actions to reduce the vulnerability of safety-critical systems to malevolent acts: A sensitivity-based decision-making approach

International Nuclear Information System (INIS)

Wang, Tai-Ran; Pedroni, Nicola; Zio, Enrico

2016-01-01

A classification model based on the Majority Rule Sorting method has been previously proposed by the authors to evaluate the vulnerability of safety-critical systems (e.g., nuclear power plants) with respect to malevolent intentional acts. In this paper, we consider a classification model previously proposed by the authors based on the Majority Rule Sorting method to evaluate the vulnerability of safety-critical systems (e.g., nuclear power plants) with respect to malevolent intentional acts. The model is here used as the basis for solving an inverse classification problem aimed at determining a set of protective actions to reduce the level of vulnerability of the safety-critical system under consideration. To guide the choice of the set of protective actions, sensitivity indicators are originally introduced as measures of the variation in the vulnerability class that a safety-critical system is expected to undergo after the application of a given set of protective actions. These indicators form the basis of an algorithm to rank different combinations of actions according to their effectiveness in reducing the safety-critical systems vulnerability. Results obtained using these indicators are presented with regard to the application of: (i) one identified action at a time, (ii) all identified actions at the same time or (iii) a random combination of identified actions. The results are presented with reference to a fictitious example considering nuclear power plants as the safety-critical systems object of the analysis. - Highlights: • We use a hierarchical framework to represent the vulnerability. • We use an empirical classification model to evaluate vulnerability. • Sensitivity indicators are introduced to rank protective actions. • Constraints (e.g., budget limitations) are accounted for. • Method is applied to fictitious Nuclear Power Plants.

TEL4Health – Mobile tools to improve patient safety

NARCIS (Netherlands)

Drachsler, Hendrik; Kalz, Marco; Specht, Marcus

2013-01-01

Drachsler, H., Kalz, M., & Specht, M. (2013, 10 October). TEL4Health – Mobile tools to improve patient safety. Presentation given at the blended learning platform of the Netherlands Organisation for Hospitals (Nederlandse Vereniging van Ziekenhuizen), Utrecht, The Netherlands.

THE INTRODUCTION OF THE METHODOLOGY TO IMPROVE ROAD SAFETY

Directory of Open Access Journals (Sweden)

D. V. Kapsky

2013-01-01

Full Text Available Recommendations for improving the road safety and quality of road traffic controlled junctions(crossings on individual parameters of traffic light control, improvement of traffic light control by optimizing the length of the transition interval in the traffic light cycle, increase awareness and early warning drivers about the upcoming change traffic lights division of transport and pedestrian traffic, road conditions , transportation planning and technical aids of road  traffic, as well as recommendations for the use of the hump in the settlements, etc.

48 CFR 52.250-5 - SAFETY Act-Equitable Adjustment.

Science.gov (United States)

2010-10-01

... Act—Equitable Adjustment (FEB 2009) (a) Definitions. As used in this clause— Act of terrorism means... the DHS has determined to be a Qualified Anti-Terrorism Technology (QATT). Qualified Anti-Terrorism... preventing, detecting, identifying, or deterring acts of terrorism or limiting the harm such acts might...

75 FR 63774 - Pipeline Safety: Safety of On-Shore Hazardous Liquid Pipelines

Science.gov (United States)

2010-10-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part... Pipelines AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), Department of... Gas Pipeline Safety Act of 1968, Public Law 90-481, delegated to DOT the authority to develop...

Critical review of controlled release packaging to improve food safety and quality.

Science.gov (United States)

Chen, Xi; Chen, Mo; Xu, Chenyi; Yam, Kit L

2018-03-19

Controlled release packaging (CRP) is an innovative technology that uses the package to release active compounds in a controlled manner to improve safety and quality for a wide range of food products during storage. This paper provides a critical review of the uniqueness, design considerations, and research gaps of CRP, with a focus on the kinetics and mechanism of active compounds releasing from the package. Literature data and practical examples are presented to illustrate how CRP controls what active compounds to release, when and how to release, how much and how fast to release, in order to improve food safety and quality.

A study in improvement of administrative system in the nuclear safety regulation

International Nuclear Information System (INIS)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho

2001-03-01

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents

A study in improvement of administrative system in the nuclear safety regulation

Energy Technology Data Exchange (ETDEWEB)

Yook, Dong Il; Kuk, Doe Hyeong; Lee, Seong Min; Kim, Jong Sam; Hwang, Sun Ho [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

One of the most important tasks to improve nuclear safety regulation system is to separate nuclear regulatory institutes from public agencies which promote the development nuclear power. Moreover, nuclear safety regulation should be not only specialized but optimized to be adapted for new environments such as high-tech information age. Especially, it is necessary to reform the current nuclear safety regulation systems both to be effective under the local self-administration which began to operate in recent years and to be supported by local residents.

Monitoring System For Improving Radiation Safety Management

International Nuclear Information System (INIS)

Osovizky, A.; Paran, J.; Tal, N.; Ankry, N.; Ashkenazi, B.; Tirosh, D.; Marziano, R.; Chisin, R.

1999-01-01

Medi SMARTS (Medical Survey Mapping Automatic Radiation Tracing System), a gamma radiation monitoring system, was installed in a nuclear medicine department. In this paper the evaluation of the system's ability to improve radiation safety management is presented. The system is based on a state of the art software that continuously collects on line radiation measurements for display, analysis and logging. Radiation is measured by GM tubes; the signal is transferred to a data processing unit and then via an RS-485 communication line to a computer. The system automatically identifies the detector type and its calibration factor, thus providing compatibility, maintainability and versatility when changing detectors. Radiation levels are displayed on the nuclear medicine department map at six locations. The system has been operating continuously for more than one year, documenting abnormal events caused by routine operation or failure incidents. In cases where abnormal working conditions were encountered, an alarm message was sent automatically to the supervisor via his tele-pager. An interesting issue observed during the system evaluation, was the inability to distinguish between high radiation levels caused by proper routine operation and those caused by safety failure incidents. The solution included examination of two parameters, radiation levels as well as their duration period. A careful analysis of the historical data, applying the appropriated combined parameters determined for each location, verified that such a system can identify abnormal events, provide alarms to warn in case of incidents and improve standard operating procedures

An interprofessional approach to improving paediatric medication safety

Directory of Open Access Journals (Sweden)

Kennedy Neil

2010-02-01

Full Text Available Abstract Background Safe drug prescribing and administration are essential elements within undergraduate healthcare curricula, but medication errors, especially in paediatric practice, continue to compromise patient safety. In this area of clinical care, collective responsibility, team working and communication between health professionals have been identified as key elements in safe clinical practice. To date, there is limited research evidence as to how best to deliver teaching and learning of these competencies to practitioners of the future. Methods An interprofessional workshop to facilitate learning of knowledge, core competencies, communication and team working skills in paediatric drug prescribing and administration at undergraduate level was developed and evaluated. The practical, ward-based workshop was delivered to 4th year medical and 3rd year nursing students and evaluated using a pre and post workshop questionnaire with open-ended response questions. Results Following the workshop, students reported an increase in their knowledge and awareness of paediatric medication safety and the causes of medication errors (p Conclusion This study has helped bridge the knowledge-skills gap, demonstrating how an interprofessional approach to drug prescribing and administration has the potential to improve quality and safety within healthcare.

IRSN safety research carried out for reviewing safety cases

International Nuclear Information System (INIS)

Serres, Ch.

2010-01-01

Christophe Serres from IRSN (France) described the independent role of the IRSN regarding research related to nuclear safety in the context of the French Planning Act of 28 June 2006 foreseeing a licence application to be submitted in 2015 for the creation of a deep geological repository. IRSN research programme is organised along research activities devoted to addressing independently-identified k ey safety issues . These 'key issues' should also be of prime concern for the implementer since they relate to the demonstration of the overall safety of the repository, and the level of funding that the implementer should afford to research activities of concern for safety. He explained that the quality and independency of the research programme carried out by IRSN allow building and improving a set of scientific knowledge and technical skills that serves the public mission of delivering technical appraisal and advice, e.g., on behalf of the national safety authority. In particular they contribute to improving the decisional process by making possible scientific dialogue with stakeholders independently from regulator or implementer. The current IRSN R and D programme is developed along the following lines: - Test the adequacy of experimental methods for which feedback is not sufficient. - Develop basic scientific knowledge in the fields where there is a need for better understanding of complex phenomena and interactions. - Develop and use numerical modelling tools to support studies on complex phenomena and interactions. - Perform specific experimental tests aiming at assessing the key parameters that may warrant the performances of the different components of the repository. These studies are carried out by means of experiments performed either at IRSN surface laboratories, or in the Tournemire Experimental Station (TES), an underground facility operated by IRSN in the south-east of France. Targeted actions on research related to operational safety and reversibility

The state of quality improvement and patient safety teaching in health professional education in New Zealand.

Science.gov (United States)

Robb, Gillian; Stolarek, Iwona; Wells, Susan; Bohm, Gillian

2017-10-27

To investigate how quality and patient safety domains are being taught in the pre-registration curricula of health profession education programmes in New Zealand. All tertiary institutions providing training for medicine, nursing, midwifery, dentistry, pharmacy, physiotherapy, dietetics and 11 other allied health professions in New Zealand were contacted and a person with relevant curriculum knowledge was invited to participate. Interviews were conducted using a semi-structured interview guide to explore nine quality and safety domains; improvement science, patient safety, quality and safety culture, evidence-based practice, patient-centred care, teamwork and communication, leadership for change, systems thinking and use of information technology (IT). Transcribed data were extracted and categorised by discipline and domain. Two researchers independently identified and categorised themes within each domain, using a general inductive approach. Forty-nine institutions were contacted and 43 (88%) people were interviewed. The inclusion and extent of quality and safety teaching was variable. Evidence-based practice, patient-centred care and teamwork and communication were the strongest domains and well embedded in programmes, while leadership, systems thinking and the role of IT were less explicitly included. Except for two institutions, improvement science was absent from pre-registration curricula. Patient safety teaching was focused mainly around incident reporting, and to a lesser extent learning from adverse events. Although a 'no blame' culture was articulated as important, the theme of individual accountability was still apparent. While participants agreed that all domains were important, the main barriers to incorporating improvement science and patient safety concepts into existing programmes included an 'already stretched curriculum' and having faculty with limited expertise in these areas. Although the building blocks for improving the quality and safety of

White paper on nuclear safety in 1981

International Nuclear Information System (INIS)

1981-01-01

The measures to research, develop and utilize atomic energy in Japan have been strengthened since the Atomic Energy Act was instituted in 1955, always on the major premise of securing the safety. The Nuclear Safety Commission established in October, 1978, has executed various measures to protect the health and safety of the nation as the center of the atomic energy safety regulation administration in Japan. Now, the Nuclear Safety Commission has published this annual report on atomic energy safety, summarizing various activities for securing the safety of atomic energy since its establishment to the end of March, 1981. This report is the inaugural issue, and the course till the Nuclear Safety Commission has made its start is also described. The report is composed of general remarks, response to the TMI accident, the safety regulation and security of nuclear facilities, the treatment and disposal of radioactive wastes, the investigation of environmental radioactivity, the countermeasures for preventing disasters around nuclear power stations and others, the research on the safety of atomic energy, international cooperation, and the improvement of the basis for securing the safety. Various related materials are attached. (Kako, I.)

16 CFR 1117.9 - Prohibited acts and sanctions.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Prohibited acts and sanctions. 1117.9 Section 1117.9 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT....C. 1001. (b) A failure to report to the Commission in a timely fashion as required by this part is a...

Health innovation for patient safety improvement.

Science.gov (United States)

Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

2013-01-01

Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Health innovation for patient safety improvement

Directory of Open Access Journals (Sweden)

Renukha Sellappans

2013-01-01

Full Text Available Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE, a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of “health smart cards” that carry vital patient medical information in the form of a “credit card” or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Intervention improves physician counseling on teen driving safety.

Science.gov (United States)

Campbell, Brendan T; Borrup, Kevin; Saleheen, Hassan; Banco, Leonard; Lapidus, Garry

2009-07-01

As part of a statewide campaign, we surveyed physician attitudes and practice regarding teen driving safety before and after a brief intervention designed to facilitate in office counseling. A 31-item self-administered survey was mailed to Connecticut physicians, and this was followed by a mailing of teen driving safety materials to physician practices in the state. A postintervention survey was mailed 8 months after the presurvey. A total of 102 physicians completed both the pre and postsurveys. Thirty-nine percent (39%) reported having had a teen in their practice die in a motor vehicle crash in the presurvey, compared with 49% in the postsurvey. Physician counseling increased significantly for a number of issues: driving while impaired from 86% to 94%; restrictions on teen driving from 53% to 64%; teen driving laws from 53% to 63%; safe vehicle from 32% to 42%; parents model safe driving from 29% to 44%; and teen-parent written contract from 15% to 37%. At baseline, the majority of physicians who provide care to teenagers in Connecticut report discussing and counseling teens on first wave teen driver safety issues (seat belts, alcohol use), but most do not discuss graduate driver licensing laws or related issues. After a brief intervention, there was a significant increase in physician counseling of teens on teen driving laws and on the use of teen-parent contracts. Additional interventions targeting physician practices can improve physician counseling to teens and their parents on issues of teen driving safety.

Improving patient safety in the radiation oncology setting through crew resource management.

Science.gov (United States)

Sundararaman, Srinath; Babbo, Angela E; Brown, John A; Doss, Richard

2014-01-01

This paper demonstrates how the communication patterns and protocol rigors of a methodology called crew resource management (CRM) can be adapted to a radiation oncology environment to create a culture of patient safety. CRM training was introduced to our comprehensive radiation oncology department in the autumn of 2009. With 34 full-time equivalent staff, we see 100-125 patients daily on 2 hospital campuses. We were assisted by a consulting group with considerable experience in helping hospitals incorporate CRM principles and practices. Implementation steps included developing change initiative skills for key leaders, providing training in teamwork and communications, creating site-specific tools for safety and efficiency, and collecting data to document results. Our goals were to improve patient safety, teamwork, communication, and efficiency through the use of tools we developed that emphasized teamwork and communication, cross-checking, and routinizing specific protocols. Our CRM plan relies on the following 4 pillars: patient identification methods; "pause for the cause"; enabling all staff to halt treatment and question decisions; and daily morning meetings. We discuss some of the hurdles to change we encountered. Our safety record has improved. Our near-miss rate before CRM implementation averaged 11 per month; our near-miss rate currently averages 1.2 per month. In the 5 years prior to CRM implementation, we experienced 1 treatment deviation per year, although none rose to the level of "mis-administration." Since implementing CRM, our current patient treatment setup and delivery process has eliminated all treatment deviations. Our practices have identified situations where ambiguity or conflicting documentation could have resulted in inappropriate treatment or treatment inefficiencies. Our staff members have developed an extraordinary sense of teamwork combined with a high degree of personal responsibility to assure patient safety and have spoken up when

Tactile display landing safety and precision improvements for the Space Shuttle

Science.gov (United States)

Olson, John M.

A tactile display belt using 24 electro-mechanical tactile transducers (tactors) was used to determine if a modified tactile display system, known as the Tactile Situation Awareness System (TSAS) improved the safety and precision of a complex spacecraft (i.e. the Space Shuttle Orbiter) in guided precision approaches and landings. The goal was to determine if tactile cues enhance safety and mission performance through reduced workload, increased situational awareness (SA), and an improved operational capability by increasing secondary cognitive workload capacity and human-machine interface efficiency and effectiveness. Using both qualitative and quantitative measures such as NASA's Justiz Numerical Measure and Synwork1 scores, an Overall Workload (OW) measure, the Cooper-Harper rating scale, and the China Lake Situational Awareness scale, plus Pre- and Post-Flight Surveys, the data show that tactile displays decrease OW, improve SA, counteract fatigue, and provide superior warning and monitoring capacity for dynamic, off-nominal, high concurrent workload scenarios involving complex, cognitive, and multi-sensory critical scenarios. Use of TSAS for maintaining guided precision approaches and landings was generally intuitive, reduced training times, and improved task learning effects. Ultimately, the use of a homogeneous, experienced, and statistically robust population of test pilots demonstrated that the use of tactile displays for Space Shuttle approaches and landings with degraded vehicle systems, weather, and environmental conditions produced substantial improvements in safety, consistency, reliability, and ease of operations under demanding conditions. Recommendations for further analysis and study are provided in order to leverage the results from this research and further explore the potential to reduce the risk of spaceflight and aerospace operations in general.